tl-update-auto

git-svn-id: svn://tug.org/texlive/trunk@50233 c570f23f-e606-0410-a88d-b1316a301751

1 files changed, 144 insertions, 113 deletions

diff --git a/Build/source/build-aux/texinfo.tex b/Build/source/build-aux/texinfo.tex
index 33d982a6a01..ebb16b44bdc 100644
--- a/Build/source/build-aux/texinfo.tex
+++ b/Build/source/build-aux/texinfo.tex
@@ -3,7 +3,7 @@
 % Load plain if necessary, i.e., if running under initex.
 \expandafter\ifx\csname fmtname\endcsname\relax\input plain\fi
 %
-\def\texinfoversion{2019-02-28.20}
+\def\texinfoversion{2019-03-02.16}
 
 %
 % Copyright 1985, 1986, 1988, 1990-2019 Free Software Foundation, Inc.
@@ -258,8 +258,8 @@
 
 % \domark is called twice inside \chapmacro, to add one
 % mark before the section break, and one after.
-%   In the second call \prevchapterdefs is the same as \lastchapterdefs,
-% and \prevsectiondefs is the same as \lastsectiondefs.
+%   In the second call \prevchapterdefs is the same as \currentchapterdefs,
+% and \prevsectiondefs is the same as \currentsectiondefs.
 %   Then if the page is not broken at the mark, some of the previous
 % section appears on the page, and we can get the name of this section
 % from \firstmark for @everyheadingmarks top.
@@ -267,11 +267,11 @@
 %
 % See page 260 of The TeXbook.
 \def\domark{%
-  \toks0=\expandafter{\lastchapterdefs}%
-  \toks2=\expandafter{\lastsectiondefs}%
+  \toks0=\expandafter{\currentchapterdefs}%
+  \toks2=\expandafter{\currentsectiondefs}%
   \toks4=\expandafter{\prevchapterdefs}%
   \toks6=\expandafter{\prevsectiondefs}%
-  \toks8=\expandafter{\lastcolordefs}%
+  \toks8=\expandafter{\currentcolordefs}%
   \mark{%
                    \the\toks0 \the\toks2  % 0: marks for @everyheadingmarks top
       \noexpand\or \the\toks4 \the\toks6  % 1: for @everyheadingmarks bottom
@@ -288,19 +288,19 @@
 % @setcolor (or @url, or @link, etc.) between @contents and the very
 % first @chapter.
 \def\gettopheadingmarks{%
-  \ifcase0\topmark\fi
+  \ifcase0\the\savedtopmark\fi
   \ifx\thischapter\empty \ifcase0\firstmark\fi \fi
 }
 \def\getbottomheadingmarks{\ifcase1\botmark\fi}
-\def\getcolormarks{\ifcase2\topmark\fi}
+\def\getcolormarks{\ifcase2\the\savedtopmark\fi}
 
 % Avoid "undefined control sequence" errors.
-\def\lastchapterdefs{}
-\def\lastsectiondefs{}
-\def\lastsection{}
+\def\currentchapterdefs{}
+\def\currentsectiondefs{}
+\def\currentsection{}
 \def\prevchapterdefs{}
 \def\prevsectiondefs{}
-\def\lastcolordefs{}
+\def\currentcolordefs{}
 
 % Margin to add to right of even pages, to left of odd pages.
 \newdimen\bindingoffset
@@ -310,11 +310,33 @@
 % Main output routine.
 %
 \chardef\PAGE = 255
-\output = {\onepageout{\pagecontents\PAGE}}
+\output = {\savetopmark\onepageout{\pagecontents\PAGE}}
 
 \newbox\headlinebox
 \newbox\footlinebox
 
+% When outputting the double column layout for indices, an output routine
+% is run several times, which hides the original value of \topmark.  This
+% can lead to a page heading being output and duplicating the chapter heading
+% of the index.  Hence, save the contents of \topmark at the beginning of
+% the output routine.  The saved contents are valid until we actually
+% \shipout a page.
+%
+% (We used to run a short output routine to actually set \topmark and 
+% \firstmark to the right values, but if this was called with an empty page 
+% containing whatsits for writing index entries, the whatsits would be thrown 
+% away and the index auxiliary file would remain empty.)
+%
+\newtoks\savedtopmark
+\newif\iftopmarksaved
+\topmarksavedtrue
+\def\savetopmark{%
+  \iftopmarksaved\else
+    \global\savedtopmark=\expandafter{\topmark}%
+    \global\topmarksavedtrue
+  \fi
+}
+
 % \onepageout takes a vbox as an argument.
 % \shipout a vbox for a single page, adding an optional header, footer
 % and footnote.  This also causes index entries for this page to be written
@@ -326,23 +348,17 @@
   \ifodd\pageno  \advance\hoffset by \bindingoffset
   \else \advance\hoffset by -\bindingoffset\fi
   %
-  % Common context changes for both heading and footing.
-  % Do this outside of the \shipout so @code etc. will be expanded in
-  % the headline as they should be, not taken literally (outputting ''code).
-  \def\commmonheadfootline{\let\hsize=\txipagewidth \texinfochars}
-  %
   % Retrieve the information for the headings from the marks in the page,
   % and call Plain TeX's \makeheadline and \makefootline, which use the
   % values in \headline and \footline.
   %
   % This is used to check if we are on the first page of a chapter.
-  \ifcase1\topmark\fi
+  \ifcase1\the\savedtopmark\fi
   \let\prevchaptername\thischaptername
   \ifcase0\firstmark\fi
   \let\curchaptername\thischaptername
   %
   \ifodd\pageno \getoddheadingmarks \else \getevenheadingmarks \fi
-  \ifodd\pageno \getoddfootingmarks \else \getevenfootingmarks \fi
   %
   \ifx\curchaptername\prevchaptername
     \let\thischapterheading\thischapter
@@ -353,7 +369,14 @@
     \def\thischapterheading{}%
   \fi
   %
+  % Common context changes for both heading and footing.
+  % Do this outside of the \shipout so @code etc. will be expanded in
+  % the headline as they should be, not taken literally (outputting ''code).
+  \def\commmonheadfootline{\let\hsize=\txipagewidth \texinfochars}
+  %
   \global\setbox\headlinebox = \vbox{\commmonheadfootline \makeheadline}%
+  %
+  \ifodd\pageno \getoddfootingmarks \else \getevenfootingmarks \fi
   \global\setbox\footlinebox = \vbox{\commmonheadfootline \makefootline}%
   %
   {%
@@ -384,8 +407,9 @@
         \unvbox\footlinebox
       \fi
       %
-    }% end of \shipout\vbox
-  }% end of group with \indexdummies
+    }%
+  }%
+  \global\topmarksavedfalse
   \advancepageno
   \ifnum\outputpenalty>-20000 \else\dosupereject\fi
 }
@@ -1161,7 +1185,7 @@ output) for that.)}
   % Set color, and create a mark which defines \thiscolor accordingly,
   % so that \makeheadline knows which color to restore.
   \def\setcolor#1{%
-    \xdef\lastcolordefs{\gdef\noexpand\thiscolor{#1}}%
+    \xdef\currentcolordefs{\gdef\noexpand\thiscolor{#1}}%
     \domark
     \pdfsetcolor{#1}%
   }
@@ -1169,7 +1193,7 @@ output) for that.)}
   \def\maincolor{\rgbBlack}
   \pdfsetcolor{\maincolor}
   \edef\thiscolor{\maincolor}
-  \def\lastcolordefs{}
+  \def\currentcolordefs{}
   %
   \def\makefootline{%
     \baselineskip24pt
@@ -1547,7 +1571,7 @@ output) for that.)}
   % Set color, and create a mark which defines \thiscolor accordingly,
   % so that \makeheadline knows which color to restore.
   \def\setcolor#1{%
-    \xdef\lastcolordefs{\gdef\noexpand\thiscolor{#1}}%
+    \xdef\currentcolordefs{\gdef\noexpand\thiscolor{#1}}%
     \domark
     \pdfsetcolor{#1}%
   }
@@ -1555,7 +1579,7 @@ output) for that.)}
   \def\maincolor{\rgbBlack}
   \pdfsetcolor{\maincolor}
   \edef\thiscolor{\maincolor}
-  \def\lastcolordefs{}
+  \def\currentcolordefs{}
   %
   \def\makefootline{%
     \baselineskip24pt
@@ -5255,9 +5279,6 @@ end
   @gdef@useindexbackslash{@def\{{@indexbackslash}}}
 }
 
-% Definition for writing index entry text.
-\def\sortas#1{}%
-
 % Definition for writing index entry sort key.
 {
 \catcode`\-=13
@@ -5269,6 +5290,67 @@ end
   \xdef\indexsortkey{#1}\endgroup}
 }
 
+% Given index entry text like "aaa @subentry bbb @sortas{ZZZ}":
+%   * Set \bracedtext to "{aaa}{bbb}"
+%   * Set \fullindexsortkey to "aaa @subentry ZZZ"
+%
+\def\splitindexentry#1{%
+  \gdef\fullindexsortkey{}%
+  \xdef\bracedtext{}%
+  \def\sep{}%
+  \expandafter\doindexsegment#1\subentry\finish\subentry
+}
+
+% append the results from the next segment
+\def\doindexsegment#1\subentry{%
+  \def\segment{#1}%
+  \ifx\segment\isfinish
+  \else
+    %
+    % Fully expand the segment, throwing away any @sortas directives, and 
+    % trim spaces.
+    \def\sortas##1{}%
+    \edef\trimmed{\segment}%
+    \edef\trimmed{\expandafter\eatspaces\expandafter{\trimmed}}%
+    %
+    \xdef\bracedtext{\bracedtext{\trimmed}}%
+    %
+    % Get the string to sort by.  Process the segment with all
+    % font commands turned off.
+    \bgroup
+      \let\sortas\indexwritesortas
+      \indexnofonts
+      % The braces around the commands are recognized by texindex.
+      \def\lbracechar{{\indexlbrace}}%
+      \def\rbracechar{{\indexrbrace}}%
+      \let\{=\lbracechar
+      \let\}=\rbracechar
+      %
+      \let\indexsortkey\empty
+      % Execute the segment and throw away the typeset output.  This executes
+      % any @sortas commands in this segment.
+      \setbox\dummybox = \hbox{\segment}%
+      \ifx\indexsortkey\empty{%
+        \indexnonalnumdisappear
+        \xdef\trimmed{\segment}%
+        \xdef\trimmed{\expandafter\eatspaces\expandafter{\trimmed}}%
+        \xdef\indexsortkey{\trimmed}%
+        \ifx\indexsortkey\empty\xdef\indexsortkey{ }\fi
+      }\fi
+      %
+      % Append to \fullindexsortkey.
+      \edef\tmp{\gdef\noexpand\fullindexsortkey{%
+                  \fullindexsortkey\sep\indexsortkey}}%
+      \tmp
+    \egroup
+    \def\sep{\subentry}%
+    %
+    \expandafter\doindexsegment
+  \fi
+}
+\def\isfinish{\finish}%
+
+\let\subentry\relax
 
 % Write the entry in \toks0 to the index file.
 %
@@ -5282,24 +5364,10 @@ end
   \indexdummies % Must do this here, since \bf, etc expand at this stage
   \useindexbackslash % \indexbackslash isn't defined now so it will be output 
                      % as is; and it will print as backslash.
-  % The braces around \indexbrace are recognized by texindex.
-  %
-  % Get the string to sort by, by processing the index entry with all
-  % font commands turned off.
-  {\indexnofonts
-   \def\lbracechar{{\indexlbrace}}%
-   \def\rbracechar{{\indexrbrace}}%
-   \let\{=\lbracechar
-   \let\}=\rbracechar
-   \indexnonalnumdisappear
-   \xdef\indexsortkey{}%
-   \let\sortas=\indexwritesortas
-   \setbox\dummybox = \hbox{\indextext}% Execute any \sortas
-   \ifx\indexsortkey\empty
-     \xdef\indexsortkey{\indextext}%
-     \ifx\indexsortkey\empty\xdef\indexsortkey{ }\fi
-   \fi
-  }%
+  %
+  % Split the entry into primary entry and any subentries, and get the index 
+  % sort key.
+  \splitindexentry\indextext
   %
   % Set up the complete index entry, with both the sort key and
   % the original text, including any font commands.  We write
@@ -5307,13 +5375,9 @@ end
   % subentry case), texindex reduces to two when writing the .??s
   % sorted result.
   %
-  % Fully expand the text of the index entry and trim spaces.
-  \edef\indextext{\indextext}%
-  \edef\indextext{\expandafter\eatspaces\expandafter{\indextext}}%
-  \toks0=\expandafter{\indextext}%
   \edef\temp{%
     \write\writeto{%
-      \string\entry{\indexsortkey}{\noexpand\folio}{\the\toks0}}%
+      \string\entry{\fullindexsortkey}{\noexpand\folio}\bracedtext}%
   }%
   \temp
 }
@@ -5789,34 +5853,13 @@ end
 \newbox\partialpage
 \newdimen\doublecolumnhsize
 
-% Use inside an output routine to save \topmark and \firstmark
-\def\savemarks{%
-  \global\savedtopmark=\expandafter{\topmark }%
-  \global\savedfirstmark=\expandafter{\firstmark }%
-}
-\newtoks\savedtopmark
-\newtoks\savedfirstmark
-
-% Set \topmark and \firstmark for next time \output runs.
-% Can't be run from withinside \output (because any material
-% added while an output routine is active, including 
-% penalties, is saved for after it finishes).  The page so far
-% should be empty, otherwise what's on it will be thrown away.
-\def\restoremarks{%
-  \mark{\the\savedtopmark}%
-  \bgroup\output = {%
-    \setbox\dummybox=\box\PAGE
-  }abc\eject\egroup
-  % "abc" because output routine doesn't fire for a completely empty page.
-  \mark{\the\savedfirstmark}%
-}
-
 \def\begindoublecolumns{\begingroup % ended by \enddoublecolumns
   % If not much space left on page, start a new page.
   \ifdim\pagetotal>0.8\vsize\vfill\eject\fi
   %
   % Grab any single-column material above us.
   \output = {%
+    \savetopmark
     %
     % Here is a possibility not foreseen in manmac: if we accumulate a
     % whole lot of material, we might end up calling this \output
@@ -5834,15 +5877,8 @@ end
       \unvbox\PAGE
       \kern-\topskip \kern\baselineskip
     }%
-    \savemarks
   }%
   \eject % run that output routine to set \partialpage
-  \restoremarks
-  %
-  % We recover the two marks that the last output routine saved in order
-  % to propagate the information in marks added around a chapter heading,
-  % which could be otherwise be lost by the time the final page is output.
-  %
   %
   % Use the double-column output routine for subsequent pages.
   \output = {\doublecolumnout}%
@@ -5883,6 +5919,7 @@ end
 %
 \def\doublecolumnout{%
   %
+  \savetopmark
   \splittopskip=\topskip \splitmaxdepth=\maxdepth
   \dimen@ = \vsize
   \divide\dimen@ by 2
@@ -5938,7 +5975,7 @@ end
   %
   \output = {%
     % Split the last of the double-column material.
-    \savemarks
+    \savetopmark
     \balancecolumns
   }%
   \eject % call the \output just set
@@ -5949,7 +5986,6 @@ end
     \global\output = {\onepageout{\pagecontents\PAGE}}%
     %
     \endgroup % started in \begindoublecolumns
-    \restoremarks
     % Leave the double-column material on the current page, no automatic
     % page break.
     \box\balancedcolumns
@@ -6464,27 +6500,22 @@ end
   \expandafter\ifx\thisenv\titlepage\else
     \checkenv{}% chapters, etc., should not start inside an environment.
   \fi
-  % FIXME: \chapmacro is currently called from inside \titlepage when
-  % \setcontentsaftertitlepage to print the "Table of Contents" heading, but
-  % this should probably be done by \sectionheading with an option to print
-  % in chapter size.
-  %
   % Insert the first mark before the heading break (see notes for \domark).
-  \let\prevchapterdefs=\lastchapterdefs
-  \let\prevsectiondefs=\lastsectiondefs
-  \gdef\lastsectiondefs{\gdef\thissectionname{}\gdef\thissectionnum{}%
+  \let\prevchapterdefs=\currentchapterdefs
+  \let\prevsectiondefs=\currentsectiondefs
+  \gdef\currentsectiondefs{\gdef\thissectionname{}\gdef\thissectionnum{}%
                         \gdef\thissection{}}%
   %
   \def\temptype{#2}%
   \ifx\temptype\Ynothingkeyword
-    \gdef\lastchapterdefs{\gdef\thischaptername{#1}\gdef\thischapternum{}%
+    \gdef\currentchapterdefs{\gdef\thischaptername{#1}\gdef\thischapternum{}%
                           \gdef\thischapter{\thischaptername}}%
   \else\ifx\temptype\Yomitfromtockeyword
-    \gdef\lastchapterdefs{\gdef\thischaptername{#1}\gdef\thischapternum{}%
+    \gdef\currentchapterdefs{\gdef\thischaptername{#1}\gdef\thischapternum{}%
                           \gdef\thischapter{}}%
   \else\ifx\temptype\Yappendixkeyword
     \toks0={#1}%
-    \xdef\lastchapterdefs{%
+    \xdef\currentchapterdefs{%
       \gdef\noexpand\thischaptername{\the\toks0}%
       \gdef\noexpand\thischapternum{\appendixletter}%
       % \noexpand\putwordAppendix avoids expanding indigestible
@@ -6495,7 +6526,7 @@ end
     }%
   \else
     \toks0={#1}%
-    \xdef\lastchapterdefs{%
+    \xdef\currentchapterdefs{%
       \gdef\noexpand\thischaptername{\the\toks0}%
       \gdef\noexpand\thischapternum{\the\chapno}%
       % \noexpand\putwordChapter avoids expanding indigestible
@@ -6515,18 +6546,18 @@ end
   %
   % Now the second mark, after the heading break.  No break points
   % between here and the heading.
-  \let\prevchapterdefs=\lastchapterdefs
-  \let\prevsectiondefs=\lastsectiondefs
+  \let\prevchapterdefs=\currentchapterdefs
+  \let\prevsectiondefs=\currentsectiondefs
   \domark
   %
   {%
     \chapfonts \rm
     \let\footnote=\errfootnoteheading % give better error message
     %
-    % Have to define \lastsection before calling \donoderef, because the
+    % Have to define \currentsection before calling \donoderef, because the
     % xref code eventually uses it.  On the other hand, it has to be called
     % after \pchapsepmacro, or the headline will change too soon.
-    \gdef\lastsection{#1}%
+    \gdef\currentsection{#1}%
     %
     % Only insert the separating space if we have a chapter/appendix
     % number, and don't print the unnumbered ``number''.
@@ -6615,10 +6646,10 @@ end
     \csname #2fonts\endcsname \rm
     %
     % Insert first mark before the heading break (see notes for \domark).
-    \let\prevsectiondefs=\lastsectiondefs
+    \let\prevsectiondefs=\currentsectiondefs
     \ifx\temptype\Ynothingkeyword
       \ifx\sectionlevel\seckeyword
-        \gdef\lastsectiondefs{\gdef\thissectionname{#1}\gdef\thissectionnum{}%
+        \gdef\currentsectiondefs{\gdef\thissectionname{#1}\gdef\thissectionnum{}%
                               \gdef\thissection{\thissectionname}}%
       \fi
     \else\ifx\temptype\Yomitfromtockeyword
@@ -6626,7 +6657,7 @@ end
     \else\ifx\temptype\Yappendixkeyword
       \ifx\sectionlevel\seckeyword
         \toks0={#1}%
-        \xdef\lastsectiondefs{%
+        \xdef\currentsectiondefs{%
           \gdef\noexpand\thissectionname{\the\toks0}%
           \gdef\noexpand\thissectionnum{#4}%
           % \noexpand\putwordSection avoids expanding indigestible
@@ -6639,7 +6670,7 @@ end
     \else
       \ifx\sectionlevel\seckeyword
         \toks0={#1}%
-        \xdef\lastsectiondefs{%
+        \xdef\currentsectiondefs{%
           \gdef\noexpand\thissectionname{\the\toks0}%
           \gdef\noexpand\thissectionnum{#4}%
           % \noexpand\putwordSection avoids expanding indigestible
@@ -6665,28 +6696,28 @@ end
     %
     % Now the second mark, after the heading break.  No break points
     % between here and the heading.
-    \global\let\prevsectiondefs=\lastsectiondefs
+    \global\let\prevsectiondefs=\currentsectiondefs
     \domark
     %
     % Only insert the space after the number if we have a section number.
     \ifx\temptype\Ynothingkeyword
       \setbox0 = \hbox{}%
       \def\toctype{unn}%
-      \gdef\lastsection{#1}%
+      \gdef\currentsection{#1}%
     \else\ifx\temptype\Yomitfromtockeyword
       % for @headings -- no section number, don't include in toc,
-      % and don't redefine \lastsection.
+      % and don't redefine \currentsection.
       \setbox0 = \hbox{}%
       \def\toctype{omit}%
       \let\sectionlevel=\empty
     \else\ifx\temptype\Yappendixkeyword
       \setbox0 = \hbox{#4\enspace}%
       \def\toctype{app}%
-      \gdef\lastsection{#1}%
+      \gdef\currentsection{#1}%
     \else
       \setbox0 = \hbox{#4\enspace}%
       \def\toctype{num}%
-      \gdef\lastsection{#1}%
+      \gdef\currentsection{#1}%
     \fi\fi\fi
     %
     % Write the toc entry (before \donoderef).  See comments in \chapmacro.
@@ -8750,7 +8781,7 @@ end
 
 % \setref{NAME}{SNT} defines a cross-reference point NAME (a node or an
 % anchor), which consists of three parts:
-% 1) NAME-title - the current sectioning name taken from \lastsection,
+% 1) NAME-title - the current sectioning name taken from \currentsection,
 %                 or the anchor name.
 % 2) NAME-snt   - section number and type, passed as the SNT arg, or
 %                 empty for anchors.
@@ -8772,7 +8803,7 @@ end
 	\write\auxfile{@xrdef{#1-% #1 of \setref, expanded by the \edef
 	  ##1}{##2}}% these are parameters of \writexrdef
       }%
-      \toks0 = \expandafter{\lastsection}%
+      \toks0 = \expandafter{\currentsection}%
       \immediate \writexrdef{title}{\the\toks0 }%
       \immediate \writexrdef{snt}{\csname #2\endcsname}% \Ynumbered etc.
       \safewhatsit{\writexrdef{pg}{\folio}}% will be written later, at \shipout
@@ -9570,13 +9601,13 @@ end
       \global\advance\floatno by 1
       %
       {%
-        % This magic value for \lastsection is output by \setref as the
+        % This magic value for \currentsection is output by \setref as the
         % XREFLABEL-title value.  \xrefX uses it to distinguish float
         % labels (which have a completely different output format) from
         % node and anchor labels.  And \xrdef uses it to construct the
         % lists of floats.
         %
-        \edef\lastsection{\floatmagic=\safefloattype}%
+        \edef\currentsection{\floatmagic=\safefloattype}%
         \setref{\floatlabel}{Yfloat}%
       }%
     \fi
@@ -9699,7 +9730,7 @@ end
 
 % #1 is the control sequence we are passed; we expand into a conditional
 % which is true if #1 represents a float ref.  That is, the magic
-% \lastsection value which we \setref above.
+% \currentsection value which we \setref above.
 %
 \def\iffloat#1{\expandafter\doiffloat#1==\finish}
 %