epstopdf 2.11 (30sep09)

git-svn-id: svn://tug.org/texlive/trunk@15605 c570f23f-e606-0410-a88d-b1316a301751

1 files changed, 227 insertions, 146 deletions

diff --git a/Build/source/texk/texlive/linked_scripts/epstopdf/epstopdf.pl b/Build/source/texk/texlive/linked_scripts/epstopdf/epstopdf.pl
index 862743c8118..4349ed87024 100755
--- a/Build/source/texk/texlive/linked_scripts/epstopdf/epstopdf.pl
+++ b/Build/source/texk/texlive/linked_scripts/epstopdf/epstopdf.pl
@@ -2,39 +2,100 @@ eval '(exit $?0)' && eval 'exec perl -S $0 ${1+"$@"}' && eval 'exec perl -S $0 $
   if 0;
 use strict;
 
-# THIS SOFTWARE IS PROVIDED BY THE AUTHOR ``AS IS'' AND ANY EXPRESS OR IMPLIED
-# WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED WARRANTIES OF
-# MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE DISCLAIMED.  IN NO
-# EVENT SHALL THE AUTHOR OR CONTRIBUTORS BE LIABLE FOR ANY DIRECT, INDIRECT,
-# INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT NOT
-# LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS OF USE, DATA, OR
-# PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON ANY THEORY OF
-# LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT (INCLUDING
-# NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF THIS SOFTWARE,
-# EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
-
-# Change by Thomas Esser, Sept. 1998: The above lines allows us to find
-# perl along $PATH rather than guessing a fixed location. The above
-# construction should work with most shells.
-
-# A script to transform an EPS file so that:
-#   a) it is guaranteed to start at the 0,0 coordinate
+# $Id: epstopdf.pl 15569 2009-09-30 00:21:49Z karl $
+# (Copyright lines below.)
+# 
+# Redistribution and use in source and binary forms, with or without
+# modification, are permitted provided that the following conditions are met:
+# 
+# 1. Redistributions of source code must retain the above copyright
+#    notice, this list of conditions and the following disclaimer. 
+# 2. Redistributions in binary form must reproduce the above copyright
+#    notice, this list of conditions and the following disclaimer in the
+#    documentation and/or other materials provided with the distribution. 
+# 3. The name of the author may not be used to endorse or promote
+#    products derived from this software without specific prior written
+#    permission. 
+# 
+# THIS SOFTWARE IS PROVIDED BY THE AUTHOR S IS'' AND ANY EXPRESS OR
+# IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED
+# WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE
+# DISCLAIMED. IN NO EVENT SHALL THE AUTHOR BE LIABLE FOR ANY DIRECT,
+# INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES
+# (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR
+# SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION)
+# HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT,
+# STRICT LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN
+# ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE
+# POSSIBILITY OF SUCH DAMAGE.
+# 
+# ----------------------------------------------------------------
+# 
+# This is a script to transform an EPS file such that:
+#   a) it is guaranteed to start at the 0,0 coordinate.
 #   b) it sets a page size exactly corresponding to the BoundingBox
 # This means that when Ghostscript renders it, the result needs no
 # cropping, and the PDF MediaBox is correct.
-#   c) the result is piped to Ghostscript and a PDF version written
+#   c) the result is piped to Ghostscript and a PDF version written.
 #
 # It needs a Level 2 PS interpreter.
-# If the bounding box is not right, of course, you have problems...
-#
-# The only thing I have not allowed for is the case of
-# "%%BoundingBox: (atend)", which is more complicated.
-#
-# Sebastian Rahtz, for Elsevier Science
-#
-# now with extra tricks from Hans Hagen's texutil.
+# If the bounding box is not right, of course, there will be problems.
 #
+# One thing not allowed for is the case of
+# "%%BoundingBox: (atend)" when input is not seekable (e.g., from a pipe),
+# which is more complicated.
+# 
+# emacs-page
 # History
+#  2009/09/27 v2.11 (Karl Berry)
+#    * Fixed two bugs in the (atend) handling code (Martin von Gagern)
+#    * Improved handling of CR line ending (Martin von Gagern)
+#    * More error checking
+#    * --version option
+#    * Create source repository in TeX Live
+#  2009/07/17 v2.9.11gw
+#    * Added -dSAFER to default gs options
+#	TL2009 wants to use a restricted variant of -shell-escape,
+#	allowing epstopdf to run. However without -dSAFER Ghostscript
+#	allows writing to files (other than given in -sOutputFile)
+#	and running commands (through Ghostscript pipe's language feature).
+#  2009/05/09 v2.9.10gw
+#    * Changed cygwin name for ghostscript to gs
+#  2008/08/26 v2.9.9gw
+#    * Switch to embed fonts (default=yes) (J.P. Chretien)
+#    * turned no AutoRotatePages into an option (D. Kreil) (default = None)
+#    * Added resolution switch (D. Kreil)
+#    * Added BSD-style license
+#  2007/07/18 v2.9.8gw
+#  2007/05/18 v.2.9.7gw (Gerben Wierda)
+#    * Merged both supplied 2.9.6 versions
+#  2007/05/15 v2.9.6tp (Theo Papadopoulo)
+#    * Simplified the (atend) support
+#  2007/01/24 v2.9.6sw (Staszek Wawrykiewicz)
+#    * patched to work also on Windows
+#  2005/10/06 v2.9.5gw (Gerben Wierda)
+#    * Fixed a horrendous bug in the (atend) handling code
+#  2005/10/06 v2.9.4gw (Gerben Wierda)
+#    * This has become the official version for now
+#  2005/10/01 v2.9.3draft (Gerben Wierda)
+#    * Quote OutFilename
+#  2005/09/29 v2.9.2draft (Gerben Wierda)
+#    * Quote OutFilename
+#  2004/03/17 v2.9.1draft (Gerben Wierda)
+#    * No autorotate page
+#  2003/04/22 v2.9draft (Gerben Wierda)
+#    * Fixed bug where with cr-eol files everything up to the first %!
+#    * in the first 2048 bytes was gobbled (double ugh!)
+#  2002/02/21 v2.8draft (Gerben Wierda)
+#    * Fixed bug where last line of buffer was not copied out (ugh!)
+#  2002/02/18 v2.8draft (Gerben Wierda)
+#    * Handle different eol styles transparantly
+#    * Applied fix from Peder Axensten for Freehand bug
+#  2001/03/05 v2.7 (Heiko Oberdiek)
+#    * Newline before grestore for the case that there is no
+#      whitespace at the end of the eps file.
+#  2000/11/05 v2.6 (Heiko Oberdiek)
+#    * %%HiresBoundingBox corrected to %%HiResBoundingBox
 #  1999/05/06 v2.5 (Heiko Oberdiek)
 #    * New options: --hires, --exact, --filter, --help.
 #    * Many cosmetics: title, usage, ...
@@ -50,117 +111,103 @@ use strict;
 #    * using of $bbxpat in all BoundingBox cases,
 #      correct the first white space to '...Box:\s*$bb...'
 #    * corrected first line (one line instead of two before 'if 0;';
-#  2000/11/05 v2.6 (Heiko Oberdiek)
-#    * %%HiresBoundingBox corrected to %%HiResBoundingBox
-#  2001/03/05 v2.7 (Heiko Oberdiek)
-#    * Newline before grestore for the case that there is no
-#      whitespace at the end of the eps file.
-#  2002/02/18 v2.8draft (Gerben Wierda)
-#    * Handle different eol styles transparantly
-#    * Applied fix from Peder Axensten for Freehand bug
-#  2002/02/21 v2.8draft (Gerben Wierda)
-#    * Fixed bug where last line of buffer was not copied out (ugh!)
-#  2003/04/22 v2.9draft (Gerben Wierda)
-#    * Fixed bug where with cr-eol files everything up to the first %!
-#    * in the first 2048 bytes was gobbled (double ugh!)
-#  2004/03/17 v2.9.1draft (Gerben Wierda)
-#    * No autorotate page
-#  2005/09/29 v2.9.2draft (Gerben Wierda)
-#    * Quote OutFilename
-#  2005/10/01 v2.9.3draft (Gerben Wierda)
-#    * Quote OutFilename
-#  2005/10/06 v2.9.4gw (Gerben Wierda)
-#    * This has become the official version for now
-#  2005/10/06 v2.9.5gw (Gerben Wierda)
-#    * Fixed a horrendous bug in the (atend) handling code
-#  2007/01/24 v2.9.6sw (Staszek Wawrykiewicz)
-#    * patched to work also on Windows
-#  2007/05/15 v2.9.6tp (Theo Papadopoulo)
-#    * Simplified the (atend) support
-#  2007/05/18 v.2.9.7gw (Gerben Wierda)
-#    * Merged both supplied 2.9.6 versions
-#  2007/07/18 v2.9.8gw
-#  2008/08/26 v2.9.9gw
-#    * Switch to embed fonts (default=yes) (J.P. Chretien)
-#    * turned no AutoRotatePages into an option (D. Kreil) (default = None)
-#    * Added resolution switch (D. Kreil)
-#    * Added BSD-style license
-#  2009/05/09 v2.9.10gw
-#    * Changed cygwin name for ghostscript to gs
-#  2009/07/17 v2.9.11gw
-#    * Added -dSAFER to default gs options
-#	TL2009 wants to use a restricted variant of -shell-escape,
-#	allowing epstopdf to run. However without -dSAFER Ghostscript
-#	allows writing to files (other than given in -sOutputFile)
-#	and running commands (through Ghostscript pipe's language feature).
+# 
+# Thomas Esser, Sept. 1998: change initial lines to find
+# perl along $PATH rather than guessing a fixed location. The above
+# construction should work with most shells.
+#
+# Originally by Sebastian Rahtz, for Elsevier Science
+# with extra tricks from Hans Hagen's texutil and many more.
+# emacs-page
 
 ### program identification
 my $program = "epstopdf";
-my $filedate="2009/07/19";
-my $fileversion="2.9.11gw";
-my $copyright = "Copyright 1998-2001 by Sebastian Rahtz et al., 2002-2009 by Gerben Wierda et al. Free software under a BSD-style license.";
-my $title = "\U$program\E $fileversion, $filedate - $copyright\n";
+my $ident = '($Id: epstopdf.pl 15569 2009-09-30 00:21:49Z karl $) 2.11';
+my $copyright = <<END_COPYRIGHT ;
+Copyright 1998-2001 Sebastian Rahtz et al.
+Copyright 2002-2009 Gerben Wierda et al.
+Copyright 2009 Karl Berry et al.
+License RBSD: Revised BSD <http://www.xfree86.org/3.3.6/COPYRIGHT2.html#5>
+This is free software: you are free to change and redistribute it.
+There is NO WARRANTY, to the extent permitted by law.
+END_COPYRIGHT
+my $title = "$program $ident\n";
 
 ### ghostscript command name
 my $GS = "gs";
 $GS = "gswin32c" if $^O eq 'MSWin32';
 
 ### options
-$::opt_help=0;
-$::opt_debug=0;
+$::opt_outfile="";
 $::opt_compress=1;
-$::opt_gs=1;
+$::opt_debug=0;
 $::opt_embed=1;
-$::opt_hires=0;
 $::opt_exact=0;
 $::opt_filter=0;
-$::opt_outfile="";
+$::opt_gs=1;
+$::opt_hires=0;
+$::opt_gscmd="";
 $::opt_res=0;
 $::opt_autorotate="None";
 
 ### usage
 my @bool = ("false", "true");
-my $resmsg=$::opt_res? $::opt_res:"[use gs default]";
-my $rotmsg=$::opt_autorotate? $::opt_autorotate:"[use gs default]";
+my $resmsg = $::opt_res ? $::opt_res : "[use gs default]";
+my $rotmsg = $::opt_autorotate ? $::opt_autorotate : "[use gs default]";
 my $usage = <<"END_OF_USAGE";
-${title}Syntax:  $program [options] <eps file>
+${title}Usage: $program [OPTION]... [EPSFILE]
+
+Convert EPS to PDF, by default using Ghostscript.
+
 Options:
-  --help:             print usage
-  --outfile=<file>:   write result to <file>
-  --res=<dpi>:        set image resolution  (default: $resmsg);
-  --(no)filter:       read standard input   (default: $bool[$::opt_filter])
-  --(no)gs:           run ghostscript       (default: $bool[$::opt_gs])
-  --(no)compress:     use compression       (default: $bool[$::opt_compress])
-  --(no)embed:        embed fonts           (default: $bool[$::opt_embed])
-  --(no)hires:        scan HiResBoundingBox (default: $bool[$::opt_hires])
-  --(no)exact:        scan ExactBoundingBox (default: $bool[$::opt_exact])
-  --(no)debug:        debug informations    (default: $bool[$::opt_debug])
-  --autorotate=<val>: set AutoRotatePages   (default: $rotmsg)
-                      Recognized values: None, All, PageByPage
+  --help             display this help and exit
+  --version          display version information and exit
+  
+  --outfile=FILE     write result to FILE
+  --(no)compress     use compression       (default: $bool[$::opt_compress])
+  --(no)debug        write debugging info  (default: $bool[$::opt_debug])
+  --(no)embed        embed fonts           (default: $bool[$::opt_embed])
+  --(no)exact        scan ExactBoundingBox (default: $bool[$::opt_exact])
+  --(no)filter       read standard input   (default: $bool[$::opt_filter])
+  --(no)gs           run ghostscript       (default: $bool[$::opt_gs])
+  --(no)hires        scan HiResBoundingBox (default: $bool[$::opt_hires])
+  --gscmd=VAL        pipe output to VAL    (default: $GS)
+  --res=DPI          set image resolution  (default: $resmsg)
+  --autorotate=VAL   set AutoRotatePages   (default: $rotmsg)
+                      Recognized VAL choices: None, All, PageByPage
                       For EPS files, PageByPage is equivalent to All
 
 Examples for producing 'test.pdf':
   * $program test.eps
   * produce postscript | $program --filter >test.pdf
   * produce postscript | $program -f -d -o=test.pdf
+
 Example: look for HiResBoundingBox and produce corrected PostScript:
-  * $program -d --nogs -hires test.ps>testcorr.ps
+  * $program -d --nogs --hires test.ps >testcorr.ps
+
+When reporting bugs, please include an input file and command line
+options so the problem can be reproduced.
+
+Report bugs to: tex-k\@tug.org
+epstopdf home page: <http://tug.org/epstopdf/>
 END_OF_USAGE
 
 ### process options
 use Getopt::Long;
 GetOptions (
-  "help!",
+  "help",
+  "version",
+  "outfile=s",
+  "compress!",
   "debug!",
+  "embed!",
+  "exact!",
   "filter!",
-  "compress!",
   "gs!",
-  "embed!",
   "hires!",
-  "exact!",
-  "outfile=s",
-  "autorotate=s",
+  "gscmd=s",
   "res=i",
+  "autorotate=s",
 ) or die $usage;
 
 ### help functions
@@ -168,17 +215,27 @@ sub debug {
   print STDERR "* @_\n" if $::opt_debug;
 }
 sub warning {
-  print STDERR "==> Warning: @_!\n";
+  print STDERR "==> Warning: @_\n";
 }
 sub error {
-  die "$title!!! Error: @_!\n";
+  die "$title!!! Error: @_\n";
 }
 sub errorUsage {
-  die "$usage\n!!! Error: @_!\n";
+  die "$usage\n!!! Error: @_\n";
+}
+
+### help, version options.
+if ($::opt_help) {
+  print $usage;
+  exit (0);
+}
+
+if ($::opt_version) {
+  print $title;
+  print $copyright;
+  exit (0);
 }
 
-### option help
-die $usage if $::opt_help;
 
 ### get input filename
 my $InputFilename = "";
@@ -192,20 +249,23 @@ else {
   @ARGV > 0 or die errorUsage "Input filename missing";
   @ARGV < 2 or die errorUsage "Unknown option or too many input files";
   $InputFilename = $ARGV[0];
-  -f $InputFilename or error "\"$InputFilename\" does not exist";
+  #-r $InputFilename or error "\"$InputFilename\" not readable";
   debug "Input filename:", $InputFilename;
 }
 
 ### option compress & embed
 my $GSOPTS = "-dSAFER ";
-$GSOPTS .= " -dPDFSETTINGS=/prepress -dMaxSubsetPct=100 -dSubsetFonts=true -dEmbedAllFonts=true " if $::opt_embed;
+$GSOPTS .= (" -dPDFSETTINGS=/prepress -dMaxSubsetPct=100 "
+           . "-dSubsetFonts=true -dEmbedAllFonts=true ")
+   if $::opt_embed; 
 $GSOPTS .= "-dUseFlateCompression=false " unless $::opt_compress;
 $GSOPTS .= "-r$::opt_res " if $::opt_res;
-$resmsg=$::opt_res? $::opt_res:"[use gs default]";
+$resmsg= $::opt_res ? $::opt_res : "[use gs default]";
 $GSOPTS .= "-dAutoRotatePages=/$::opt_autorotate " if $::opt_autorotate;
 die "Invalid value for autorotate: '$::opt_autorotate' (use 'All', 'None' or 'PageByPage').\n"
-    if ($::opt_autorotate and not $::opt_autorotate =~ /^(None|All|PageByPage)$/);
-$rotmsg=$::opt_autorotate? $::opt_autorotate:"[use gs default]";
+    if ($::opt_autorotate and 
+        not $::opt_autorotate =~ /^(None|All|PageByPage)$/);
+$rotmsg = $::opt_autorotate ? $::opt_autorotate : "[use gs default]";
 
 ### option BoundingBox types
 my $BBName = "%%BoundingBox:";
@@ -236,51 +296,65 @@ else {
   debug "Output filename:", $OutputFilename;
 }
 
+### option gscmd
+if ($::opt_gscmd) {
+  debug "Switching from $GS to $::opt_gscmd";
+  $GS = $::opt_gscmd;
+}
+
 ### option gs
 if ($::opt_gs) {
   debug "Ghostscript command:", $GS;
   debug "Compression:", ($::opt_compress) ? "on" : "off";
   debug "Embedding:", ($::opt_embed) ? "on" : "off";
-  debug("Rotation: $rotmsg");
-  debug("Resolution: $resmsg");
+  debug "Rotation:", $rotmsg;
+  debug "Resolution:", $resmsg;
 }
 
+### emacs-page
 ### open input file
-open(IN,"<$InputFilename") or error "Cannot open",
-  ($::opt_filter) ? "standard input" : "\"$InputFilename\"";
+open(IN, "<$InputFilename") or error "Cannot open",
+  ($::opt_filter) ? "standard input" : "\"$InputFilename\": $!";
 binmode IN;
 
 ### open output file
+my $outname;  # used in error message at end
 if ($::opt_gs) {
   my $pipe = "$GS -q -sDEVICE=pdfwrite $GSOPTS" .
           " -sOutputFile=\"$OutputFilename\" - -c quit";
   debug "Ghostscript pipe:", $pipe;
   open(OUT,"|$pipe") or error "Cannot open Ghostscript for piped input";
+  $outname = $GS;
 }
 else {
   open(OUT,">$OutputFilename") or error "Cannot write \"$OutputFilename\"";
+  $outname = $OutputFilename;
 }
+binmode OUT;
 
 # reading a cr-eol file on a lf-eol system makes it impossible to parse
 # the header and besides it will read the intire file into yor line by line
 # scalar. this is also true the other way around.
 
+### emacs-page
 ### scan a block, try to determine eol style
 
 my $buf;
 my $buflen;
 my @bufarray;
-my $bufarraypos;
+my $inputpos;
 
 # We assume 2048 is big enough.
 my $EOLSCANBUFSIZE = 2048;
 
-$buflen = read( IN, $buf, $EOLSCANBUFSIZE);
+$buflen = read(IN, $buf, $EOLSCANBUFSIZE);
 if ($buflen > 0) {
   my $crlfpos;
   my $lfpos;
   my $crpos;
 
+  $inputpos = 0;
+
   # remove binary junk before header
   # if there is no header, we assume the file starts with ascii style and
   # we look for a eol style anyway, to prevent possible loading of the
@@ -288,10 +362,11 @@ if ($buflen > 0) {
   if ($buf =~ /%!/) {
     # throw away binary junk before %!
     $buf =~ s/(.*?)%!/%!/o;
+    $inputpos = length($1);
   }
-  $lfpos = index( $buf, "\n");
-  $crpos = index( $buf, "\r");
-  $crlfpos = index( $buf, "\r\n");
+  $lfpos = index($buf, "\n");
+  $crpos = index($buf, "\r");
+  $crlfpos = index($buf, "\r\n");
 
   if ($crpos > 0 and ($lfpos == -1 or $lfpos > $crpos+1)) {
     # The first eol was a cr and it was not immediately followed by a lf
@@ -303,34 +378,31 @@ if ($buflen > 0) {
   # it to our buffer. This will make the buffer contain an entire line
   # at the end. Then split the buffer in an array. We will draw lines from
   # that array until it is empty, then move again back to <IN>
-  $buf .= <IN> unless eof( IN);
-  $buflen = length( $buf);
-  $bufarraypos = 0;
+  $buf .= <IN> unless eof(IN);
+  $buflen = length($buf);
 
   # Some extra magic is needed here: if we set $/ to \r, Perl's re engine
   # still thinks eol is \n in regular expressions (not very nice) so we
-  # cannot split on ^, but have to split on \r and reappend those.
+  # cannot split on ^, but have to split on a look-behind for \r.
   if ($/ eq "\r") {
-    @bufarray = split( /\r/ms, $buf); # split on \r
-    grep( $_ .= "\r", @bufarray); # re-append \r to each array item
+    @bufarray = split(/(?<=\r)/ms, $buf); # split after \r
   }
   else {
-    @bufarray = split( /^/ms, $buf);
+    @bufarray = split(/^/ms, $buf);
   }
 }
 
 ### getline
-sub getline {
+sub getline
+{
   if ($#bufarray >= 0) {
-    $_ = shift( @bufarray);
-    $bufarraypos += length( $_);
-    # debug "getline from array. bufarraypos = $bufarraypos";
-    # debug "*** READ: $_";
+    $_ = shift(@bufarray);
   }
   else {
     $_ = <IN>;
   }
-  return( defined( $_));
+  $inputpos += length($_) if defined $_;
+  return defined($_);
 }
 
 ### scan first line
@@ -350,7 +422,8 @@ my $bbxpatt = '[0-9eE\.\-]';
 my $BBValues = "\\s*($bbxpatt+)\\s+($bbxpatt+)\\s+($bbxpatt+)\\s+($bbxpatt+)";
 my $BBCorrected = 0;
 
-sub CorrectBoundingBox {
+sub CorrectBoundingBox
+{
   my ($llx, $lly, $urx, $ury) = @_;
   debug "Old BoundingBox:", $llx, $lly, $urx, $ury;
   my ($width, $height) = ($urx - $llx, $ury - $lly);
@@ -358,11 +431,12 @@ sub CorrectBoundingBox {
   debug "New BoundingBox: 0 0", $width, $height;
   debug "Offset:", $xoffset, $yoffset;
 
-  print OUT "%%BoundingBox: 0 0 $width $height\n";
-  print OUT "<< /PageSize [$width $height] >> setpagedevice\n";
-  print OUT "gsave $xoffset $yoffset translate\n";
+  print OUT "%%BoundingBox: 0 0 $width $height$/";
+  print OUT "<< /PageSize [$width $height] >> setpagedevice$/";
+  print OUT "gsave $xoffset $yoffset translate$/";
 }
 
+### emacs-page
 ### scan header
 if ($header) {
   HEADER: while (getline()) {
@@ -376,7 +450,7 @@ if ($header) {
     }
 
     ### BoundingBox with values
-    if (/^$BBName$BBValues/) {
+    if (/^$BBName$BBValues/o) {
       CorrectBoundingBox $1, $2, $3, $4;
       $BBCorrected = 1;
       last;
@@ -390,18 +464,16 @@ if ($header) {
                 "with option --filter";
         last;
       }
-      my $pos = tell(OUT)+length($_);
+      my $pos = $inputpos;
       debug "Current file position:", $pos;
 
       # looking for %%BoundingBox
       while (getline()) {
         # skip over included documents
-        if (/^%%BeginDocument/) {
-          while (getline()) {
-            last if /^%%EndDocument/;
-          }
-        }
-        if (/^$BBName$BBValues/) {
+        my $nestDepth = 0;
+        $nestDepth++ if /^%%BeginDocument/;
+        $nestDepth-- if /^%%EndDocument/;
+        if ($nestDepth == 0 && /^$BBName$BBValues/o) {
           CorrectBoundingBox $1, $2, $3, $4;
           $BBCorrected = 1;
           last;
@@ -409,7 +481,7 @@ if ($header) {
       }
 
       # go back
-      seek( IN, $pos, 0) or error "Cannot go back to line \"$BBName (atend)\"";
+      seek(IN, $pos, 0) or error "Cannot go back to line \"$BBName (atend)\"";
       last;
     }
 
@@ -423,9 +495,18 @@ while (getline()) {
   print OUT;
 }
 
+### emacs-page
 ### close files
 close(IN);
-print OUT "\ngrestore\n" if $BBCorrected;
+print OUT "$/grestore$/" if $BBCorrected;
 close(OUT);
+
+# if ghostscript exited badly, we should too.
+if ($? & 127) {
+  error(sprintf "Writing to $outname failed, signal %d\n", $? & 127);
+} elsif ($? != 0) {
+  error(sprintf "Writing to $outname failed, error code %d\n", $? >> 8);
+}
+
 warning "BoundingBox not found" unless $BBCorrected;
 debug "Ready.";