summaryrefslogtreecommitdiff
path: root/Build
diff options
context:
space:
mode:
authorPeter Breitenlohner <peb@mppmu.mpg.de>2009-05-22 09:10:45 +0000
committerPeter Breitenlohner <peb@mppmu.mpg.de>2009-05-22 09:10:45 +0000
commit27cd5f76629a2601557c868c5c701cbd38ca99b4 (patch)
treea2ac87160d28808f5952babbea6e37a99f206453 /Build
parent81fb2544161bdba1881473560bf39d6c5695c8fe (diff)
build system: cleanup, remove unused files, regenerate
git-svn-id: svn://tug.org/texlive/trunk@13371 c570f23f-e606-0410-a88d-b1316a301751
Diffstat (limited to 'Build')
-rwxr-xr-xBuild/source/Build11
-rw-r--r--Build/source/ChangeLog5
-rw-r--r--Build/source/Makefile.am3
-rw-r--r--Build/source/Makefile.in8
-rw-r--r--Build/source/WARNING35
-rw-r--r--Build/source/ac/withenable.ac4
-rwxr-xr-xBuild/source/configure48
-rw-r--r--Build/source/libs/Makefile.in12
-rw-r--r--Build/source/libs/ac/withenable.ac4
-rwxr-xr-xBuild/source/libs/configure8
-rw-r--r--Build/source/libs/dummy/Makefile.in8
-rw-r--r--Build/source/libs/freetype/Makefile.in8
-rw-r--r--Build/source/libs/freetype2/Makefile.in8
-rw-r--r--Build/source/libs/gd/Makefile.in9
-rw-r--r--Build/source/libs/graphite/Makefile.in9
-rw-r--r--Build/source/libs/icu/Makefile.in8
-rw-r--r--Build/source/libs/icu/ac/withenable.ac2
-rw-r--r--Build/source/libs/icu/dummy/Makefile.in15
-rw-r--r--Build/source/libs/libpng/Makefile.in9
-rw-r--r--Build/source/libs/obsdcompat/Makefile.in8
-rw-r--r--Build/source/libs/t1lib/Makefile.in8
-rw-r--r--Build/source/libs/teckit/Makefile.in10
-rw-r--r--Build/source/libs/xpdf/Makefile.in9
-rw-r--r--Build/source/libs/xpdf/fofi/Makefile.in2
-rw-r--r--Build/source/libs/xpdf/goo/Makefile.in2
-rw-r--r--Build/source/libs/xpdf/xpdf/Makefile.in2
-rw-r--r--Build/source/libs/zlib/Makefile.in9
-rw-r--r--Build/source/m4/kpse-setup.m44
-rwxr-xr-xBuild/source/reautoconf104
-rw-r--r--Build/source/texk/Makefile.in12
-rw-r--r--Build/source/texk/ac/withenable.ac4
-rw-r--r--Build/source/texk/afm2pl/Makefile.in10
-rw-r--r--Build/source/texk/bibtex8/Makefile.in9
-rw-r--r--Build/source/texk/cjkutils/Makefile.in8
-rw-r--r--Build/source/texk/cjkutils/conv/Makefile.in2
-rw-r--r--Build/source/texk/cjkutils/hbf2gf/Makefile.in2
-rw-r--r--Build/source/texk/cjkutils/scripts/Makefile.in2
-rwxr-xr-xBuild/source/texk/configure8
-rw-r--r--Build/source/texk/detex/Makefile.in8
-rw-r--r--Build/source/texk/devnag/Makefile.in10
-rw-r--r--Build/source/texk/devnag/src/Makefile.in2
-rw-r--r--Build/source/texk/dtl/Makefile.in9
-rw-r--r--Build/source/texk/dummy/Makefile.in8
-rw-r--r--Build/source/texk/dvi2tty/Makefile.in9
-rw-r--r--Build/source/texk/dvidvi/Makefile.in9
-rw-r--r--Build/source/texk/dviljk/Makefile.in10
-rw-r--r--Build/source/texk/dvipdfm/Makefile.in11
-rw-r--r--Build/source/texk/dvipng/Makefile.in9
-rw-r--r--Build/source/texk/dvipos/Makefile.in9
-rw-r--r--Build/source/texk/dvipsk/Makefile.in8
-rw-r--r--Build/source/texk/dvipsk/ac/withenable.ac2
-rw-r--r--Build/source/texk/dvipsk/squeeze/Makefile.in15
-rw-r--r--Build/source/texk/gsftopk/Makefile.in10
-rw-r--r--Build/source/texk/kpathsea/Makefile.in11
-rw-r--r--Build/source/texk/kpathsea/doc/Makefile.in2
-rw-r--r--Build/source/texk/kpathsea/man/Makefile.in2
-rw-r--r--Build/source/texk/lacheck/Makefile.in8
-rw-r--r--Build/source/texk/lcdf-typetools/Makefile.in10
-rw-r--r--Build/source/texk/lcdf-typetools/cfftot1/Makefile.in2
-rw-r--r--Build/source/texk/lcdf-typetools/libefont/Makefile.in2
-rw-r--r--Build/source/texk/lcdf-typetools/liblcdf/Makefile.in2
-rw-r--r--Build/source/texk/lcdf-typetools/mmafm/Makefile.in2
-rw-r--r--Build/source/texk/lcdf-typetools/mmpfb/Makefile.in2
-rw-r--r--Build/source/texk/lcdf-typetools/otfinfo/Makefile.in2
-rw-r--r--Build/source/texk/lcdf-typetools/otftotfm/Makefile.in2
-rw-r--r--Build/source/texk/lcdf-typetools/t1dotlessj/Makefile.in2
-rw-r--r--Build/source/texk/lcdf-typetools/t1lint/Makefile.in2
-rw-r--r--Build/source/texk/lcdf-typetools/t1rawafm/Makefile.in2
-rw-r--r--Build/source/texk/lcdf-typetools/t1reencode/Makefile.in2
-rw-r--r--Build/source/texk/lcdf-typetools/t1testpage/Makefile.in2
-rw-r--r--Build/source/texk/lcdf-typetools/ttftotype42/Makefile.in2
-rw-r--r--Build/source/texk/makeindexk/Makefile.in10
-rw-r--r--Build/source/texk/musixflx/Makefile.in9
-rw-r--r--Build/source/texk/ps2pkm/Makefile.in9
-rw-r--r--Build/source/texk/seetexk/Makefile.in9
-rw-r--r--Build/source/texk/tetex/Makefile.in8
-rw-r--r--Build/source/texk/tex4htk/Makefile.in9
-rw-r--r--Build/source/texk/texlive/Makefile.in272
-rw-r--r--Build/source/texk/texlive/aclocal.m4319
-rwxr-xr-xBuild/source/texk/texlive/configure415
-rw-r--r--Build/source/texk/texlive/linked_scripts/Makefile.in211
-rw-r--r--Build/source/texk/ttf2pk/Makefile.in10
-rw-r--r--Build/source/texk/ttfdump/Makefile.in10
-rw-r--r--Build/source/texk/web2c/Makefile.in12
-rw-r--r--Build/source/texk/web2c/ac/withenable.ac2
-rw-r--r--Build/source/texk/web2c/doc/Makefile.in2
-rw-r--r--Build/source/texk/web2c/lib/Makefile.in2
-rw-r--r--Build/source/texk/web2c/luatexdir/am/libzzip.am1
-rwxr-xr-xBuild/source/texk/web2c/luatexdir/zziplib/uses/config.guess1561
-rwxr-xr-xBuild/source/texk/web2c/luatexdir/zziplib/uses/config.sub1686
-rwxr-xr-xBuild/source/texk/web2c/luatexdir/zziplib/uses/depcomp630
-rwxr-xr-xBuild/source/texk/web2c/luatexdir/zziplib/uses/install-sh520
-rw-r--r--Build/source/texk/web2c/luatexdir/zziplib/uses/ltmain.sh6500
-rwxr-xr-xBuild/source/texk/web2c/luatexdir/zziplib/uses/missing376
-rwxr-xr-xBuild/source/texk/web2c/luatexdir/zziplib/uses/mkinstalldirs162
-rw-r--r--Build/source/texk/web2c/man/Makefile.in2
-rw-r--r--Build/source/texk/web2c/mpware/Makefile.in2
-rw-r--r--Build/source/texk/web2c/omegafonts/Makefile.in2
-rw-r--r--Build/source/texk/web2c/otps/Makefile.in2
-rw-r--r--Build/source/texk/web2c/web2c/Makefile.in5
-rw-r--r--Build/source/texk/web2c/window/Makefile.in2
-rw-r--r--Build/source/texk/xdv2pdf/Makefile.in9
-rw-r--r--Build/source/texk/xdvik/ChangeLog.TL4
-rw-r--r--Build/source/texk/xdvik/ac/withenable.ac2
-rw-r--r--Build/source/texk/xdvik/squeeze/Makefile.in15
-rw-r--r--Build/source/texk/xdvipdfmx/Makefile.in11
-rw-r--r--Build/source/texk/xdvipdfmx/src/Makefile.in2
-rw-r--r--Build/source/utils/Makefile.in12
-rw-r--r--Build/source/utils/ac/withenable.ac4
-rwxr-xr-xBuild/source/utils/configure8
-rw-r--r--Build/source/utils/dialog/Makefile.in8
-rw-r--r--Build/source/utils/dummy/Makefile.in8
-rw-r--r--Build/source/utils/pdfopen/Makefile.in8
-rw-r--r--Build/source/utils/ps2eps/Makefile.in8
-rw-r--r--Build/source/utils/psutils/Makefile.in9
-rw-r--r--Build/source/utils/t1utils/Makefile.in10
-rw-r--r--Build/source/utils/tpic2pdftex/Makefile.in8
-rw-r--r--Build/source/utils/vlna/Makefile.in8
-rw-r--r--Build/source/utils/xindy/Makefile.in9
-rw-r--r--Build/source/utils/xindy/binaries/Makefile.in2
-rw-r--r--Build/source/utils/xindy/doc/Makefile.in2
-rw-r--r--Build/source/utils/xindy/doc/style-tutorial/Makefile.in2
-rw-r--r--Build/source/utils/xindy/make-rules/Makefile.in2
-rw-r--r--Build/source/utils/xindy/make-rules/alphabets/Makefile.in2
-rw-r--r--Build/source/utils/xindy/make-rules/alphabets/albanian/Makefile.in2
-rw-r--r--Build/source/utils/xindy/make-rules/alphabets/belarusian/Makefile.in2
-rw-r--r--Build/source/utils/xindy/make-rules/alphabets/bulgarian/Makefile.in2
-rw-r--r--Build/source/utils/xindy/make-rules/alphabets/croatian/Makefile.in2
-rw-r--r--Build/source/utils/xindy/make-rules/alphabets/czech/Makefile.in2
-rw-r--r--Build/source/utils/xindy/make-rules/alphabets/danish/Makefile.in2
-rw-r--r--Build/source/utils/xindy/make-rules/alphabets/dutch/Makefile.in2
-rw-r--r--Build/source/utils/xindy/make-rules/alphabets/english/Makefile.in2
-rw-r--r--Build/source/utils/xindy/make-rules/alphabets/esperanto/Makefile.in2
-rw-r--r--Build/source/utils/xindy/make-rules/alphabets/estonian/Makefile.in2
-rw-r--r--Build/source/utils/xindy/make-rules/alphabets/finnish/Makefile.in2
-rw-r--r--Build/source/utils/xindy/make-rules/alphabets/french/Makefile.in2
-rw-r--r--Build/source/utils/xindy/make-rules/alphabets/general/Makefile.in2
-rw-r--r--Build/source/utils/xindy/make-rules/alphabets/georgian/Makefile.in2
-rw-r--r--Build/source/utils/xindy/make-rules/alphabets/german/Makefile.in2
-rw-r--r--Build/source/utils/xindy/make-rules/alphabets/greek/Makefile.in2
-rw-r--r--Build/source/utils/xindy/make-rules/alphabets/gypsy/Makefile.in2
-rw-r--r--Build/source/utils/xindy/make-rules/alphabets/hausa/Makefile.in2
-rw-r--r--Build/source/utils/xindy/make-rules/alphabets/hebrew/Makefile.in2
-rw-r--r--Build/source/utils/xindy/make-rules/alphabets/hungarian/Makefile.in2
-rw-r--r--Build/source/utils/xindy/make-rules/alphabets/icelandic/Makefile.in2
-rw-r--r--Build/source/utils/xindy/make-rules/alphabets/italian/Makefile.in2
-rw-r--r--Build/source/utils/xindy/make-rules/alphabets/klingon/Makefile.in2
-rw-r--r--Build/source/utils/xindy/make-rules/alphabets/kurdish/Makefile.in2
-rw-r--r--Build/source/utils/xindy/make-rules/alphabets/latin/Makefile.in2
-rw-r--r--Build/source/utils/xindy/make-rules/alphabets/latvian/Makefile.in2
-rw-r--r--Build/source/utils/xindy/make-rules/alphabets/lithuanian/Makefile.in2
-rw-r--r--Build/source/utils/xindy/make-rules/alphabets/lower-sorbian/Makefile.in2
-rw-r--r--Build/source/utils/xindy/make-rules/alphabets/macedonian/Makefile.in2
-rw-r--r--Build/source/utils/xindy/make-rules/alphabets/mongolian/Makefile.in2
-rw-r--r--Build/source/utils/xindy/make-rules/alphabets/norwegian/Makefile.in2
-rw-r--r--Build/source/utils/xindy/make-rules/alphabets/polish/Makefile.in2
-rw-r--r--Build/source/utils/xindy/make-rules/alphabets/portuguese/Makefile.in2
-rw-r--r--Build/source/utils/xindy/make-rules/alphabets/romanian/Makefile.in2
-rw-r--r--Build/source/utils/xindy/make-rules/alphabets/russian/Makefile.in2
-rw-r--r--Build/source/utils/xindy/make-rules/alphabets/serbian/Makefile.in2
-rw-r--r--Build/source/utils/xindy/make-rules/alphabets/slovak/Makefile.in2
-rw-r--r--Build/source/utils/xindy/make-rules/alphabets/slovenian/Makefile.in2
-rw-r--r--Build/source/utils/xindy/make-rules/alphabets/spanish/Makefile.in2
-rw-r--r--Build/source/utils/xindy/make-rules/alphabets/swedish/Makefile.in2
-rw-r--r--Build/source/utils/xindy/make-rules/alphabets/test1/Makefile.in2
-rw-r--r--Build/source/utils/xindy/make-rules/alphabets/turkish/Makefile.in2
-rw-r--r--Build/source/utils/xindy/make-rules/alphabets/ukrainian/Makefile.in2
-rw-r--r--Build/source/utils/xindy/make-rules/alphabets/upper-sorbian/Makefile.in2
-rw-r--r--Build/source/utils/xindy/make-rules/alphabets/vietnamese/Makefile.in2
-rw-r--r--Build/source/utils/xindy/make-rules/inputenc/Makefile.in2
-rw-r--r--Build/source/utils/xindy/make-rules/styles/Makefile.in2
-rw-r--r--Build/source/utils/xindy/modules/Makefile.in2
-rw-r--r--Build/source/utils/xindy/modules/base/Makefile.in2
-rw-r--r--Build/source/utils/xindy/modules/class/Makefile.in2
-rw-r--r--Build/source/utils/xindy/modules/lang/Makefile.in2
-rw-r--r--Build/source/utils/xindy/modules/lang/german/Makefile.in2
-rw-r--r--Build/source/utils/xindy/modules/lang/latin/Makefile.in2
-rw-r--r--Build/source/utils/xindy/modules/ord/Makefile.in2
-rw-r--r--Build/source/utils/xindy/modules/rules/Makefile.in2
-rw-r--r--Build/source/utils/xindy/modules/styles/Makefile.in2
-rw-r--r--Build/source/utils/xindy/rte/Makefile.in2
-rw-r--r--Build/source/utils/xindy/rte/ordrules/Makefile.in2
-rw-r--r--Build/source/utils/xindy/src/Makefile.in2
-rw-r--r--Build/source/utils/xindy/tex2xindy/Makefile.in2
-rw-r--r--Build/source/utils/xindy/user-commands/Makefile.in2
185 files changed, 925 insertions, 12727 deletions
diff --git a/Build/source/Build b/Build/source/Build
index 937aafc43e3..fa25ff8b567 100755
--- a/Build/source/Build
+++ b/Build/source/Build
@@ -81,15 +81,6 @@ cd $TL_WORKDIR || exit 1
# default to building ICU without thread support, since xetex doesn't need it.
: ${TL_CONF_THREADS=--disable-threads}
-# default to include freetype2 support for old Mac font file formats.
-: ${TL_CONF_MAC_FONTS=--with-old-mac-fonts}
-
-# configure defaults to skipping xindy, as it requires clisp (see
-# utils/README). But in addition, if --enable-xindy is given, still
-# disable the documentation and data file building, which require a
-# working LaTeX installation.
-: ${TL_CONF_XINDY="--disable-xindy-docs --disable-xindy-make-rules"}
-
# allow adding arbitrary other configure args.
: ${TL_CONFIGURE_ARGS=}
@@ -113,8 +104,6 @@ cd $TL_WORKDIR || exit 1
$TL_CONF_LARGEFILE \
$TL_CONF_XDVI_TOOLKIT \
$TL_CONF_THREADS \
- $TL_CONF_MAC_FONTS \
- $TL_CONF_XINDY \
$TL_CONFIGURE_ARGS \
"$@" \
&& eval $TL_BUILD_ENV time $TL_MAKE $TL_MAKE_FLAGS $TL_TARGET
diff --git a/Build/source/ChangeLog b/Build/source/ChangeLog
index 11b6ba43522..71e9df79448 100644
--- a/Build/source/ChangeLog
+++ b/Build/source/ChangeLog
@@ -1,3 +1,8 @@
+2008-02-21 Peter Breitenlohner <peb@mppmu.mpg.de>
+
+ * Build (TL_CONF_MAC_FONTS, TL_CONF_XINDY): removed,
+ no longer required.
+
2009-05-18 Karl Berry <karl@tug.org>
* Build (-Wdecl): allow with -g, to do -Wdeclaration-after-statement.
diff --git a/Build/source/Makefile.am b/Build/source/Makefile.am
index 903dc825136..61e2594ae2c 100644
--- a/Build/source/Makefile.am
+++ b/Build/source/Makefile.am
@@ -17,7 +17,8 @@ EXTRA_DIST = \
README.layout \
build-aux/README.TL \
build-aux/mkinstalldirs \
- m4/README
+ m4/README \
+ reautoconf
# just in case a subdirectory has added directories
dist-hook:
diff --git a/Build/source/Makefile.in b/Build/source/Makefile.in
index c918c2a1579..e2a5201244f 100644
--- a/Build/source/Makefile.in
+++ b/Build/source/Makefile.in
@@ -55,8 +55,7 @@ am__aclocal_m4_deps = $(top_srcdir)/m4/kpse-common.m4 \
$(top_srcdir)/m4/kpse-zlib-flags.m4 \
$(top_srcdir)/m4/libtool.m4 $(top_srcdir)/m4/ltoptions.m4 \
$(top_srcdir)/m4/ltsugar.m4 $(top_srcdir)/m4/ltversion.m4 \
- $(top_srcdir)/m4/lt~obsolete.m4 $(top_srcdir)/ac/withenable.ac \
- $(top_srcdir)/utils/ac/withenable.ac \
+ $(top_srcdir)/m4/lt~obsolete.m4 \
$(top_srcdir)/utils/dialog/ac/withenable.ac \
$(top_srcdir)/utils/pdfopen/ac/withenable.ac \
$(top_srcdir)/utils/ps2eps/ac/withenable.ac \
@@ -66,7 +65,6 @@ am__aclocal_m4_deps = $(top_srcdir)/m4/kpse-common.m4 \
$(top_srcdir)/utils/vlna/ac/withenable.ac \
$(top_srcdir)/utils/xindy/ac/withenable.ac \
$(top_srcdir)/utils/xindy/ac/xindy.ac \
- $(top_srcdir)/texk/ac/withenable.ac \
$(top_srcdir)/texk/web2c/ac/withenable.ac \
$(top_srcdir)/texk/web2c/ac/web2c.ac \
$(top_srcdir)/texk/afm2pl/ac/withenable.ac \
@@ -103,7 +101,6 @@ am__aclocal_m4_deps = $(top_srcdir)/m4/kpse-common.m4 \
$(top_srcdir)/texk/texlive/ac/withenable.ac \
$(top_srcdir)/texk/kpathsea/ac/withenable.ac \
$(top_srcdir)/texk/kpathsea/ac/web2c.ac \
- $(top_srcdir)/libs/ac/withenable.ac \
$(top_srcdir)/libs/icu/ac/withenable.ac \
$(top_srcdir)/libs/teckit/ac/withenable.ac \
$(top_srcdir)/libs/graphite/ac/withenable.ac \
@@ -290,7 +287,8 @@ EXTRA_DIST = \
README.layout \
build-aux/README.TL \
build-aux/mkinstalldirs \
- m4/README
+ m4/README \
+ reautoconf
@build_kpathsea_FALSE@SUBDIRS = libs utils texk
@build_kpathsea_TRUE@SUBDIRS = texk/kpathsea libs utils texk
diff --git a/Build/source/WARNING b/Build/source/WARNING
deleted file mode 100644
index ad7fab415f9..00000000000
--- a/Build/source/WARNING
+++ /dev/null
@@ -1,35 +0,0 @@
- CONSTRUCTION WORK
- =================
-
-The TeX Live build system is currently under reconstruction. It is now
-nearly complete, except for the directory
- utils/xindy/
-and a few features not yet available. Moreover the directory
- texk/xdvik/
-still needs some work, and building in that subdirectory may fail.
-
-My builds on i686-linux and i686-Darwin both went through without any
-problems.
-
-Please try ./Build for your system and tell me about any failures.
-
-Make sure to use GNU Make (an Automake generated Makefile is supposed not to
-require GNU Make, but that seems not to be the case).
-
-If /bin/sh on your system can not handle command substitutions such as
-'$(COMMAND)' and XSI constructs such as 'VAR+=VAL', you must set
-CONFIG_SHELL to a shell that does. Due to a bug in current Autoconf this
-should be done both in the environment and on the command line, e.g.,
- CONFIG_SHELL=/bin/bash ./Build CONFIG_SHELL=/bin/bash
-(assuming bourne shell syntax).
-
-If building a particular subdirectory, e.g., texk/xdvik/ fails, try
- TL_CONFIGURE_ARGS='--disable-xdvik' ./Build
-(again assuming bourne shell syntax).
-
-If there are problems with the cxx-runtime-hack (gcc only), please try adding
-'--disable-cxx-runtime-hack' to TL_CONFIGURE_ARGS.
-
-Good luck!
-
-Peter Breitenlohner <peb@mppmu.mpg.de> 2009-04-28 09:00 UTC
diff --git a/Build/source/ac/withenable.ac b/Build/source/ac/withenable.ac
deleted file mode 100644
index 47d8078a245..00000000000
--- a/Build/source/ac/withenable.ac
+++ /dev/null
@@ -1,4 +0,0 @@
-## ac/withenable.ac: configure.ac fragment for the TeX Live top-level
-dnl
-dnl Copyright (C) 2009 Peter Breitenlohner <tex-live@tug.org>
-dnl You may freely use, modify and/or distribute this file.
diff --git a/Build/source/configure b/Build/source/configure
index eb042a7eac0..1301457e50f 100755
--- a/Build/source/configure
+++ b/Build/source/configure
@@ -2495,10 +2495,6 @@ fi
-## ac/withenable.ac: configure.ac fragment for the TeX Live top-level
-
-## utils/ac/withenable.ac: configure.ac fragment for the TeX Live subdirectory utils/
-
## utils/dialog/ac/withenable.ac: configure.ac fragment for the TeX Live subdirectory utils/dialog/
## configure options and TL libraries required for dialog
# Check whether --enable-dialog was given.
@@ -2636,8 +2632,6 @@ fi
-## texk/ac/withenable.ac: configure.ac fragment for the TeX Live subdirectory texk/
-
## texk/web2c/ac/withenable.ac: configure.ac fragment for the TeX Live subdirectory texk/web2c/
## configure options and TL libraries required for web2c
# Check whether --enable-web2c was given.
@@ -3538,8 +3532,6 @@ case $enable_mktextex_default in
esac
-## libs/ac/withenable.ac: configure.ac fragment for the TeX Live subdirectory libs/
-
## libs/icu/ac/withenable.ac: configure.ac fragment for the TeX Live subdirectory libs/icu/
## configure options and TL libraries required for icu (modified for XeTeX)
@@ -5997,13 +5989,13 @@ if test "${lt_cv_nm_interface+set}" = set; then
else
lt_cv_nm_interface="BSD nm"
echo "int some_variable = 0;" > conftest.$ac_ext
- (eval echo "\"\$as_me:6000: $ac_compile\"" >&5)
+ (eval echo "\"\$as_me:5992: $ac_compile\"" >&5)
(eval "$ac_compile" 2>conftest.err)
cat conftest.err >&5
- (eval echo "\"\$as_me:6003: $NM \\\"conftest.$ac_objext\\\"\"" >&5)
+ (eval echo "\"\$as_me:5995: $NM \\\"conftest.$ac_objext\\\"\"" >&5)
(eval "$NM \"conftest.$ac_objext\"" 2>conftest.err > conftest.out)
cat conftest.err >&5
- (eval echo "\"\$as_me:6006: output\"" >&5)
+ (eval echo "\"\$as_me:5998: output\"" >&5)
cat conftest.out >&5
if $GREP 'External.*some_variable' conftest.out > /dev/null; then
lt_cv_nm_interface="MS dumpbin"
@@ -7209,7 +7201,7 @@ ia64-*-hpux*)
;;
*-*-irix6*)
# Find out which ABI we are using.
- echo '#line 7212 "configure"' > conftest.$ac_ext
+ echo '#line 7204 "configure"' > conftest.$ac_ext
if { (eval echo "$as_me:$LINENO: \"$ac_compile\"") >&5
(eval $ac_compile) 2>&5
ac_status=$?
@@ -9256,11 +9248,11 @@ else
-e 's:.*FLAGS}\{0,1\} :&$lt_compiler_flag :; t' \
-e 's: [^ ]*conftest\.: $lt_compiler_flag&:; t' \
-e 's:$: $lt_compiler_flag:'`
- (eval echo "\"\$as_me:9259: $lt_compile\"" >&5)
+ (eval echo "\"\$as_me:9251: $lt_compile\"" >&5)
(eval "$lt_compile" 2>conftest.err)
ac_status=$?
cat conftest.err >&5
- echo "$as_me:9263: \$? = $ac_status" >&5
+ echo "$as_me:9255: \$? = $ac_status" >&5
if (exit $ac_status) && test -s "$ac_outfile"; then
# The compiler can only warn and ignore the option if not recognized
# So say no if there are warnings other than the usual output.
@@ -9595,11 +9587,11 @@ else
-e 's:.*FLAGS}\{0,1\} :&$lt_compiler_flag :; t' \
-e 's: [^ ]*conftest\.: $lt_compiler_flag&:; t' \
-e 's:$: $lt_compiler_flag:'`
- (eval echo "\"\$as_me:9598: $lt_compile\"" >&5)
+ (eval echo "\"\$as_me:9590: $lt_compile\"" >&5)
(eval "$lt_compile" 2>conftest.err)
ac_status=$?
cat conftest.err >&5
- echo "$as_me:9602: \$? = $ac_status" >&5
+ echo "$as_me:9594: \$? = $ac_status" >&5
if (exit $ac_status) && test -s "$ac_outfile"; then
# The compiler can only warn and ignore the option if not recognized
# So say no if there are warnings other than the usual output.
@@ -9700,11 +9692,11 @@ else
-e 's:.*FLAGS}\{0,1\} :&$lt_compiler_flag :; t' \
-e 's: [^ ]*conftest\.: $lt_compiler_flag&:; t' \
-e 's:$: $lt_compiler_flag:'`
- (eval echo "\"\$as_me:9703: $lt_compile\"" >&5)
+ (eval echo "\"\$as_me:9695: $lt_compile\"" >&5)
(eval "$lt_compile" 2>out/conftest.err)
ac_status=$?
cat out/conftest.err >&5
- echo "$as_me:9707: \$? = $ac_status" >&5
+ echo "$as_me:9699: \$? = $ac_status" >&5
if (exit $ac_status) && test -s out/conftest2.$ac_objext
then
# The compiler can only warn and ignore the option if not recognized
@@ -9755,11 +9747,11 @@ else
-e 's:.*FLAGS}\{0,1\} :&$lt_compiler_flag :; t' \
-e 's: [^ ]*conftest\.: $lt_compiler_flag&:; t' \
-e 's:$: $lt_compiler_flag:'`
- (eval echo "\"\$as_me:9758: $lt_compile\"" >&5)
+ (eval echo "\"\$as_me:9750: $lt_compile\"" >&5)
(eval "$lt_compile" 2>out/conftest.err)
ac_status=$?
cat out/conftest.err >&5
- echo "$as_me:9762: \$? = $ac_status" >&5
+ echo "$as_me:9754: \$? = $ac_status" >&5
if (exit $ac_status) && test -s out/conftest2.$ac_objext
then
# The compiler can only warn and ignore the option if not recognized
@@ -12555,7 +12547,7 @@ else
lt_dlunknown=0; lt_dlno_uscore=1; lt_dlneed_uscore=2
lt_status=$lt_dlunknown
cat > conftest.$ac_ext <<_LT_EOF
-#line 12558 "configure"
+#line 12550 "configure"
#include "confdefs.h"
#if HAVE_DLFCN_H
@@ -12651,7 +12643,7 @@ else
lt_dlunknown=0; lt_dlno_uscore=1; lt_dlneed_uscore=2
lt_status=$lt_dlunknown
cat > conftest.$ac_ext <<_LT_EOF
-#line 12654 "configure"
+#line 12646 "configure"
#include "confdefs.h"
#if HAVE_DLFCN_H
@@ -19047,11 +19039,11 @@ else
-e 's:.*FLAGS}\{0,1\} :&$lt_compiler_flag :; t' \
-e 's: [^ ]*conftest\.: $lt_compiler_flag&:; t' \
-e 's:$: $lt_compiler_flag:'`
- (eval echo "\"\$as_me:19050: $lt_compile\"" >&5)
+ (eval echo "\"\$as_me:19042: $lt_compile\"" >&5)
(eval "$lt_compile" 2>conftest.err)
ac_status=$?
cat conftest.err >&5
- echo "$as_me:19054: \$? = $ac_status" >&5
+ echo "$as_me:19046: \$? = $ac_status" >&5
if (exit $ac_status) && test -s "$ac_outfile"; then
# The compiler can only warn and ignore the option if not recognized
# So say no if there are warnings other than the usual output.
@@ -19146,11 +19138,11 @@ else
-e 's:.*FLAGS}\{0,1\} :&$lt_compiler_flag :; t' \
-e 's: [^ ]*conftest\.: $lt_compiler_flag&:; t' \
-e 's:$: $lt_compiler_flag:'`
- (eval echo "\"\$as_me:19149: $lt_compile\"" >&5)
+ (eval echo "\"\$as_me:19141: $lt_compile\"" >&5)
(eval "$lt_compile" 2>out/conftest.err)
ac_status=$?
cat out/conftest.err >&5
- echo "$as_me:19153: \$? = $ac_status" >&5
+ echo "$as_me:19145: \$? = $ac_status" >&5
if (exit $ac_status) && test -s out/conftest2.$ac_objext
then
# The compiler can only warn and ignore the option if not recognized
@@ -19198,11 +19190,11 @@ else
-e 's:.*FLAGS}\{0,1\} :&$lt_compiler_flag :; t' \
-e 's: [^ ]*conftest\.: $lt_compiler_flag&:; t' \
-e 's:$: $lt_compiler_flag:'`
- (eval echo "\"\$as_me:19201: $lt_compile\"" >&5)
+ (eval echo "\"\$as_me:19193: $lt_compile\"" >&5)
(eval "$lt_compile" 2>out/conftest.err)
ac_status=$?
cat out/conftest.err >&5
- echo "$as_me:19205: \$? = $ac_status" >&5
+ echo "$as_me:19197: \$? = $ac_status" >&5
if (exit $ac_status) && test -s out/conftest2.$ac_objext
then
# The compiler can only warn and ignore the option if not recognized
diff --git a/Build/source/libs/Makefile.in b/Build/source/libs/Makefile.in
index ecc78d75c05..6dd83918fe0 100644
--- a/Build/source/libs/Makefile.in
+++ b/Build/source/libs/Makefile.in
@@ -37,12 +37,14 @@ DIST_COMMON = README $(am__configure_deps) \
$(srcdir)/../build-aux/config.guess \
$(srcdir)/../build-aux/config.sub \
$(srcdir)/../build-aux/install-sh \
- $(srcdir)/../build-aux/missing $(srcdir)/Makefile.am \
+ $(srcdir)/../build-aux/missing \
+ $(srcdir)/../build-aux/mkinstalldirs $(srcdir)/Makefile.am \
$(srcdir)/Makefile.in $(top_srcdir)/configure \
../build-aux/config.guess ../build-aux/config.sub \
../build-aux/depcomp ../build-aux/install-sh \
../build-aux/ltmain.sh ../build-aux/missing \
- ../build-aux/texinfo.tex ../build-aux/ylwrap ChangeLog
+ ../build-aux/mkinstalldirs ../build-aux/texinfo.tex \
+ ../build-aux/ylwrap ChangeLog
ACLOCAL_M4 = $(top_srcdir)/aclocal.m4
am__aclocal_m4_deps = $(top_srcdir)/../m4/kpse-common.m4 \
$(top_srcdir)/../m4/kpse-cxx-hack.m4 \
@@ -60,8 +62,6 @@ am__aclocal_m4_deps = $(top_srcdir)/../m4/kpse-common.m4 \
$(top_srcdir)/../m4/kpse-web2c.m4 \
$(top_srcdir)/../m4/kpse-xpdf-flags.m4 \
$(top_srcdir)/../m4/kpse-zlib-flags.m4 \
- $(top_srcdir)/../ac/withenable.ac \
- $(top_srcdir)/../utils/ac/withenable.ac \
$(top_srcdir)/../utils/dialog/ac/withenable.ac \
$(top_srcdir)/../utils/pdfopen/ac/withenable.ac \
$(top_srcdir)/../utils/ps2eps/ac/withenable.ac \
@@ -71,7 +71,6 @@ am__aclocal_m4_deps = $(top_srcdir)/../m4/kpse-common.m4 \
$(top_srcdir)/../utils/vlna/ac/withenable.ac \
$(top_srcdir)/../utils/xindy/ac/withenable.ac \
$(top_srcdir)/../utils/xindy/ac/xindy.ac \
- $(top_srcdir)/../texk/ac/withenable.ac \
$(top_srcdir)/../texk/web2c/ac/withenable.ac \
$(top_srcdir)/../texk/web2c/ac/web2c.ac \
$(top_srcdir)/../texk/afm2pl/ac/withenable.ac \
@@ -108,7 +107,6 @@ am__aclocal_m4_deps = $(top_srcdir)/../m4/kpse-common.m4 \
$(top_srcdir)/../texk/texlive/ac/withenable.ac \
$(top_srcdir)/../texk/kpathsea/ac/withenable.ac \
$(top_srcdir)/../texk/kpathsea/ac/web2c.ac \
- $(top_srcdir)/../libs/ac/withenable.ac \
$(top_srcdir)/../libs/icu/ac/withenable.ac \
$(top_srcdir)/../libs/teckit/ac/withenable.ac \
$(top_srcdir)/../libs/graphite/ac/withenable.ac \
@@ -125,7 +123,7 @@ am__configure_deps = $(am__aclocal_m4_deps) $(CONFIGURE_DEPENDENCIES) \
$(ACLOCAL_M4)
am__CONFIG_DISTCLEAN_FILES = config.status config.cache config.log \
configure.lineno config.status.lineno
-mkinstalldirs = $(install_sh) -d
+mkinstalldirs = $(SHELL) $(top_srcdir)/../build-aux/mkinstalldirs
CONFIG_CLEAN_FILES =
SOURCES =
DIST_SOURCES =
diff --git a/Build/source/libs/ac/withenable.ac b/Build/source/libs/ac/withenable.ac
deleted file mode 100644
index 36b263962bc..00000000000
--- a/Build/source/libs/ac/withenable.ac
+++ /dev/null
@@ -1,4 +0,0 @@
-## libs/ac/withenable.ac: configure.ac fragment for the TeX Live subdirectory libs/
-dnl
-dnl Copyright (C) 2009 Peter Breitenlohner <tex-live@tug.org>
-dnl You may freely use, modify and/or distribute this file.
diff --git a/Build/source/libs/configure b/Build/source/libs/configure
index 59729430d42..c7a4426712b 100755
--- a/Build/source/libs/configure
+++ b/Build/source/libs/configure
@@ -2218,10 +2218,6 @@ fi
-## ac/withenable.ac: configure.ac fragment for the TeX Live top-level
-
-## utils/ac/withenable.ac: configure.ac fragment for the TeX Live subdirectory utils/
-
## utils/dialog/ac/withenable.ac: configure.ac fragment for the TeX Live subdirectory utils/dialog/
## configure options and TL libraries required for dialog
# Check whether --enable-dialog was given.
@@ -2359,8 +2355,6 @@ fi
-## texk/ac/withenable.ac: configure.ac fragment for the TeX Live subdirectory texk/
-
## texk/web2c/ac/withenable.ac: configure.ac fragment for the TeX Live subdirectory texk/web2c/
## configure options and TL libraries required for web2c
# Check whether --enable-web2c was given.
@@ -3251,8 +3245,6 @@ case $enable_mktextex_default in
esac
-## libs/ac/withenable.ac: configure.ac fragment for the TeX Live subdirectory libs/
-
## libs/icu/ac/withenable.ac: configure.ac fragment for the TeX Live subdirectory libs/icu/
## configure options and TL libraries required for icu (modified for XeTeX)
diff --git a/Build/source/libs/dummy/Makefile.in b/Build/source/libs/dummy/Makefile.in
index c4c230c2534..246de6a1061 100644
--- a/Build/source/libs/dummy/Makefile.in
+++ b/Build/source/libs/dummy/Makefile.in
@@ -33,19 +33,21 @@ POST_UNINSTALL = :
subdir = .
DIST_COMMON = README $(am__configure_deps) \
$(srcdir)/../../build-aux/install-sh \
- $(srcdir)/../../build-aux/missing $(srcdir)/Makefile.am \
+ $(srcdir)/../../build-aux/missing \
+ $(srcdir)/../../build-aux/mkinstalldirs $(srcdir)/Makefile.am \
$(srcdir)/Makefile.in $(top_srcdir)/configure \
../../build-aux/config.guess ../../build-aux/config.sub \
../../build-aux/depcomp ../../build-aux/install-sh \
../../build-aux/ltmain.sh ../../build-aux/missing \
- ../../build-aux/texinfo.tex ../../build-aux/ylwrap
+ ../../build-aux/mkinstalldirs ../../build-aux/texinfo.tex \
+ ../../build-aux/ylwrap
ACLOCAL_M4 = $(top_srcdir)/aclocal.m4
am__aclocal_m4_deps = $(top_srcdir)/configure.ac
am__configure_deps = $(am__aclocal_m4_deps) $(CONFIGURE_DEPENDENCIES) \
$(ACLOCAL_M4)
am__CONFIG_DISTCLEAN_FILES = config.status config.cache config.log \
configure.lineno config.status.lineno
-mkinstalldirs = $(install_sh) -d
+mkinstalldirs = $(SHELL) $(top_srcdir)/../../build-aux/mkinstalldirs
CONFIG_CLEAN_FILES =
SOURCES =
DIST_SOURCES =
diff --git a/Build/source/libs/freetype/Makefile.in b/Build/source/libs/freetype/Makefile.in
index 4bbcd6a8131..8507fba8a10 100644
--- a/Build/source/libs/freetype/Makefile.in
+++ b/Build/source/libs/freetype/Makefile.in
@@ -33,19 +33,21 @@ POST_UNINSTALL = :
subdir = .
DIST_COMMON = $(am__configure_deps) \
$(srcdir)/../../build-aux/install-sh \
- $(srcdir)/../../build-aux/missing $(srcdir)/Makefile.am \
+ $(srcdir)/../../build-aux/missing \
+ $(srcdir)/../../build-aux/mkinstalldirs $(srcdir)/Makefile.am \
$(srcdir)/Makefile.in $(top_srcdir)/configure \
../../build-aux/config.guess ../../build-aux/config.sub \
../../build-aux/depcomp ../../build-aux/install-sh \
../../build-aux/ltmain.sh ../../build-aux/missing \
- ../../build-aux/texinfo.tex ../../build-aux/ylwrap ChangeLog
+ ../../build-aux/mkinstalldirs ../../build-aux/texinfo.tex \
+ ../../build-aux/ylwrap ChangeLog
ACLOCAL_M4 = $(top_srcdir)/aclocal.m4
am__aclocal_m4_deps = $(top_srcdir)/configure.ac
am__configure_deps = $(am__aclocal_m4_deps) $(CONFIGURE_DEPENDENCIES) \
$(ACLOCAL_M4)
am__CONFIG_DISTCLEAN_FILES = config.status config.cache config.log \
configure.lineno config.status.lineno
-mkinstalldirs = $(install_sh) -d
+mkinstalldirs = $(SHELL) $(top_srcdir)/../../build-aux/mkinstalldirs
CONFIG_CLEAN_FILES =
SOURCES =
DIST_SOURCES =
diff --git a/Build/source/libs/freetype2/Makefile.in b/Build/source/libs/freetype2/Makefile.in
index f8963c70ccb..f8629265c0e 100644
--- a/Build/source/libs/freetype2/Makefile.in
+++ b/Build/source/libs/freetype2/Makefile.in
@@ -33,19 +33,21 @@ POST_UNINSTALL = :
subdir = .
DIST_COMMON = $(am__configure_deps) \
$(srcdir)/../../build-aux/install-sh \
- $(srcdir)/../../build-aux/missing $(srcdir)/Makefile.am \
+ $(srcdir)/../../build-aux/missing \
+ $(srcdir)/../../build-aux/mkinstalldirs $(srcdir)/Makefile.am \
$(srcdir)/Makefile.in $(top_srcdir)/configure \
../../build-aux/config.guess ../../build-aux/config.sub \
../../build-aux/depcomp ../../build-aux/install-sh \
../../build-aux/ltmain.sh ../../build-aux/missing \
- ../../build-aux/texinfo.tex ../../build-aux/ylwrap ChangeLog
+ ../../build-aux/mkinstalldirs ../../build-aux/texinfo.tex \
+ ../../build-aux/ylwrap ChangeLog
ACLOCAL_M4 = $(top_srcdir)/aclocal.m4
am__aclocal_m4_deps = $(top_srcdir)/configure.ac
am__configure_deps = $(am__aclocal_m4_deps) $(CONFIGURE_DEPENDENCIES) \
$(ACLOCAL_M4)
am__CONFIG_DISTCLEAN_FILES = config.status config.cache config.log \
configure.lineno config.status.lineno
-mkinstalldirs = $(install_sh) -d
+mkinstalldirs = $(SHELL) $(top_srcdir)/../../build-aux/mkinstalldirs
CONFIG_CLEAN_FILES =
SOURCES =
DIST_SOURCES =
diff --git a/Build/source/libs/gd/Makefile.in b/Build/source/libs/gd/Makefile.in
index 2e7f2e950d5..b94a9f50369 100644
--- a/Build/source/libs/gd/Makefile.in
+++ b/Build/source/libs/gd/Makefile.in
@@ -34,13 +34,14 @@ subdir = .
DIST_COMMON = README $(am__configure_deps) \
$(srcdir)/../../build-aux/depcomp \
$(srcdir)/../../build-aux/install-sh \
- $(srcdir)/../../build-aux/missing $(srcdir)/Makefile.am \
+ $(srcdir)/../../build-aux/missing \
+ $(srcdir)/../../build-aux/mkinstalldirs $(srcdir)/Makefile.am \
$(srcdir)/Makefile.in $(srcdir)/config.hin \
$(top_srcdir)/configure ../../build-aux/config.guess \
../../build-aux/config.sub ../../build-aux/depcomp \
../../build-aux/install-sh ../../build-aux/ltmain.sh \
- ../../build-aux/missing ../../build-aux/texinfo.tex \
- ../../build-aux/ylwrap ChangeLog
+ ../../build-aux/missing ../../build-aux/mkinstalldirs \
+ ../../build-aux/texinfo.tex ../../build-aux/ylwrap ChangeLog
ACLOCAL_M4 = $(top_srcdir)/aclocal.m4
am__aclocal_m4_deps = $(top_srcdir)/../../m4/kpse-common.m4 \
$(top_srcdir)/../../m4/kpse-libpng-flags.m4 \
@@ -50,7 +51,7 @@ am__configure_deps = $(am__aclocal_m4_deps) $(CONFIGURE_DEPENDENCIES) \
$(ACLOCAL_M4)
am__CONFIG_DISTCLEAN_FILES = config.status config.cache config.log \
configure.lineno config.status.lineno
-mkinstalldirs = $(install_sh) -d
+mkinstalldirs = $(SHELL) $(top_srcdir)/../../build-aux/mkinstalldirs
CONFIG_HEADER = config.h
CONFIG_CLEAN_FILES =
LIBRARIES = $(noinst_LIBRARIES)
diff --git a/Build/source/libs/graphite/Makefile.in b/Build/source/libs/graphite/Makefile.in
index 7ae2f712d72..1c569d54fcd 100644
--- a/Build/source/libs/graphite/Makefile.in
+++ b/Build/source/libs/graphite/Makefile.in
@@ -39,20 +39,21 @@ DIST_COMMON = README $(am__configure_deps) $(noinst_HEADERS) \
$(srcdir)/../../build-aux/config.sub \
$(srcdir)/../../build-aux/depcomp \
$(srcdir)/../../build-aux/install-sh \
- $(srcdir)/../../build-aux/missing $(srcdir)/Makefile.am \
+ $(srcdir)/../../build-aux/missing \
+ $(srcdir)/../../build-aux/mkinstalldirs $(srcdir)/Makefile.am \
$(srcdir)/Makefile.in $(top_srcdir)/configure \
../../build-aux/config.guess ../../build-aux/config.sub \
../../build-aux/depcomp ../../build-aux/install-sh \
../../build-aux/ltmain.sh ../../build-aux/missing \
- ../../build-aux/texinfo.tex ../../build-aux/ylwrap COPYING \
- ChangeLog INSTALL TODO
+ ../../build-aux/mkinstalldirs ../../build-aux/texinfo.tex \
+ ../../build-aux/ylwrap COPYING ChangeLog INSTALL TODO
ACLOCAL_M4 = $(top_srcdir)/aclocal.m4
am__aclocal_m4_deps = $(top_srcdir)/configure.ac
am__configure_deps = $(am__aclocal_m4_deps) $(CONFIGURE_DEPENDENCIES) \
$(ACLOCAL_M4)
am__CONFIG_DISTCLEAN_FILES = config.status config.cache config.log \
configure.lineno config.status.lineno
-mkinstalldirs = $(install_sh) -d
+mkinstalldirs = $(SHELL) $(top_srcdir)/../../build-aux/mkinstalldirs
CONFIG_CLEAN_FILES =
LIBRARIES = $(noinst_LIBRARIES)
AR = ar
diff --git a/Build/source/libs/icu/Makefile.in b/Build/source/libs/icu/Makefile.in
index fd54483d180..faaf9ba26f7 100644
--- a/Build/source/libs/icu/Makefile.in
+++ b/Build/source/libs/icu/Makefile.in
@@ -33,19 +33,21 @@ POST_UNINSTALL = :
subdir = .
DIST_COMMON = $(am__configure_deps) \
$(srcdir)/../../build-aux/install-sh \
- $(srcdir)/../../build-aux/missing $(srcdir)/Makefile.am \
+ $(srcdir)/../../build-aux/missing \
+ $(srcdir)/../../build-aux/mkinstalldirs $(srcdir)/Makefile.am \
$(srcdir)/Makefile.in $(top_srcdir)/configure \
../../build-aux/config.guess ../../build-aux/config.sub \
../../build-aux/depcomp ../../build-aux/install-sh \
../../build-aux/ltmain.sh ../../build-aux/missing \
- ../../build-aux/texinfo.tex ../../build-aux/ylwrap
+ ../../build-aux/mkinstalldirs ../../build-aux/texinfo.tex \
+ ../../build-aux/ylwrap
ACLOCAL_M4 = $(top_srcdir)/aclocal.m4
am__aclocal_m4_deps = $(top_srcdir)/configure.ac
am__configure_deps = $(am__aclocal_m4_deps) $(CONFIGURE_DEPENDENCIES) \
$(ACLOCAL_M4)
am__CONFIG_DISTCLEAN_FILES = config.status config.cache config.log \
configure.lineno config.status.lineno
-mkinstalldirs = $(install_sh) -d
+mkinstalldirs = $(SHELL) $(top_srcdir)/../../build-aux/mkinstalldirs
CONFIG_CLEAN_FILES =
SOURCES =
DIST_SOURCES =
diff --git a/Build/source/libs/icu/ac/withenable.ac b/Build/source/libs/icu/ac/withenable.ac
index d8ef5cc75a4..2f97df49962 100644
--- a/Build/source/libs/icu/ac/withenable.ac
+++ b/Build/source/libs/icu/ac/withenable.ac
@@ -3,5 +3,7 @@ dnl
dnl Copyright (C) 2009 Peter Breitenlohner <tex-live@tug.org>
dnl You may freely use, modify and/or distribute this file.
dnl
+dnl extra_dirs = libs/icu/dummy
+dnl
## configure options and TL libraries required for icu (modified for XeTeX)
KPSE_WITH_LIB([icu], , [tree])
diff --git a/Build/source/libs/icu/dummy/Makefile.in b/Build/source/libs/icu/dummy/Makefile.in
index 1c111bbe8cf..9532a0feeff 100644
--- a/Build/source/libs/icu/dummy/Makefile.in
+++ b/Build/source/libs/icu/dummy/Makefile.in
@@ -33,11 +33,13 @@ POST_UNINSTALL = :
subdir = .
DIST_COMMON = README $(am__configure_deps) \
$(srcdir)/../../../build-aux/install-sh \
- $(srcdir)/../../../build-aux/missing $(srcdir)/Makefile.am \
- $(srcdir)/Makefile.in $(top_srcdir)/configure \
- ../../../build-aux/config.guess ../../../build-aux/config.sub \
- ../../../build-aux/depcomp ../../../build-aux/install-sh \
- ../../../build-aux/ltmain.sh ../../../build-aux/missing \
+ $(srcdir)/../../../build-aux/missing \
+ $(srcdir)/../../../build-aux/mkinstalldirs \
+ $(srcdir)/Makefile.am $(srcdir)/Makefile.in \
+ $(top_srcdir)/configure ../../../build-aux/config.guess \
+ ../../../build-aux/config.sub ../../../build-aux/depcomp \
+ ../../../build-aux/install-sh ../../../build-aux/ltmain.sh \
+ ../../../build-aux/missing ../../../build-aux/mkinstalldirs \
../../../build-aux/texinfo.tex ../../../build-aux/ylwrap
ACLOCAL_M4 = $(top_srcdir)/aclocal.m4
am__aclocal_m4_deps = $(top_srcdir)/configure.ac
@@ -45,7 +47,8 @@ am__configure_deps = $(am__aclocal_m4_deps) $(CONFIGURE_DEPENDENCIES) \
$(ACLOCAL_M4)
am__CONFIG_DISTCLEAN_FILES = config.status config.cache config.log \
configure.lineno config.status.lineno
-mkinstalldirs = $(install_sh) -d
+mkinstalldirs = $(SHELL) \
+ $(top_srcdir)/../../../build-aux/mkinstalldirs
CONFIG_CLEAN_FILES =
SOURCES =
DIST_SOURCES =
diff --git a/Build/source/libs/libpng/Makefile.in b/Build/source/libs/libpng/Makefile.in
index 133041a8dfc..4f7b59ab805 100644
--- a/Build/source/libs/libpng/Makefile.in
+++ b/Build/source/libs/libpng/Makefile.in
@@ -36,13 +36,14 @@ DIST_COMMON = README $(am__configure_deps) \
$(am__dist_check_SCRIPTS_DIST) \
$(srcdir)/../../build-aux/depcomp \
$(srcdir)/../../build-aux/install-sh \
- $(srcdir)/../../build-aux/missing $(srcdir)/Makefile.am \
+ $(srcdir)/../../build-aux/missing \
+ $(srcdir)/../../build-aux/mkinstalldirs $(srcdir)/Makefile.am \
$(srcdir)/Makefile.in $(srcdir)/config.h.in \
$(top_srcdir)/configure ../../build-aux/config.guess \
../../build-aux/config.sub ../../build-aux/depcomp \
../../build-aux/install-sh ../../build-aux/ltmain.sh \
- ../../build-aux/missing ../../build-aux/texinfo.tex \
- ../../build-aux/ylwrap ChangeLog
+ ../../build-aux/missing ../../build-aux/mkinstalldirs \
+ ../../build-aux/texinfo.tex ../../build-aux/ylwrap ChangeLog
ACLOCAL_M4 = $(top_srcdir)/aclocal.m4
am__aclocal_m4_deps = $(top_srcdir)/../../m4/kpse-common.m4 \
$(top_srcdir)/../../m4/kpse-zlib-flags.m4 \
@@ -51,7 +52,7 @@ am__configure_deps = $(am__aclocal_m4_deps) $(CONFIGURE_DEPENDENCIES) \
$(ACLOCAL_M4)
am__CONFIG_DISTCLEAN_FILES = config.status config.cache config.log \
configure.lineno config.status.lineno
-mkinstalldirs = $(install_sh) -d
+mkinstalldirs = $(SHELL) $(top_srcdir)/../../build-aux/mkinstalldirs
CONFIG_HEADER = config.h
CONFIG_CLEAN_FILES = png.h pngconf.h
LIBRARIES = $(noinst_LIBRARIES)
diff --git a/Build/source/libs/obsdcompat/Makefile.in b/Build/source/libs/obsdcompat/Makefile.in
index 997e47f12ce..0eda3dc6af0 100644
--- a/Build/source/libs/obsdcompat/Makefile.in
+++ b/Build/source/libs/obsdcompat/Makefile.in
@@ -38,20 +38,22 @@ DIST_COMMON = README $(am__configure_deps) \
$(srcdir)/../../build-aux/config.sub \
$(srcdir)/../../build-aux/depcomp \
$(srcdir)/../../build-aux/install-sh \
- $(srcdir)/../../build-aux/missing $(srcdir)/Makefile.am \
+ $(srcdir)/../../build-aux/missing \
+ $(srcdir)/../../build-aux/mkinstalldirs $(srcdir)/Makefile.am \
$(srcdir)/Makefile.in $(top_srcdir)/configure \
$(top_srcdir)/obsdcompat/config.h.in \
../../build-aux/config.guess ../../build-aux/config.sub \
../../build-aux/depcomp ../../build-aux/install-sh \
../../build-aux/ltmain.sh ../../build-aux/missing \
- ../../build-aux/texinfo.tex ../../build-aux/ylwrap ChangeLog
+ ../../build-aux/mkinstalldirs ../../build-aux/texinfo.tex \
+ ../../build-aux/ylwrap ChangeLog
ACLOCAL_M4 = $(top_srcdir)/aclocal.m4
am__aclocal_m4_deps = $(top_srcdir)/configure.ac
am__configure_deps = $(am__aclocal_m4_deps) $(CONFIGURE_DEPENDENCIES) \
$(ACLOCAL_M4)
am__CONFIG_DISTCLEAN_FILES = config.status config.cache config.log \
configure.lineno config.status.lineno
-mkinstalldirs = $(install_sh) -d
+mkinstalldirs = $(SHELL) $(top_srcdir)/../../build-aux/mkinstalldirs
CONFIG_HEADER = $(top_builddir)/obsdcompat/config.h
CONFIG_CLEAN_FILES =
LIBRARIES = $(noinst_LIBRARIES)
diff --git a/Build/source/libs/t1lib/Makefile.in b/Build/source/libs/t1lib/Makefile.in
index 66182e16f4d..0ae67118522 100644
--- a/Build/source/libs/t1lib/Makefile.in
+++ b/Build/source/libs/t1lib/Makefile.in
@@ -36,20 +36,22 @@ DIST_COMMON = README $(am__configure_deps) \
$(am__dist_check_SCRIPTS_DIST) \
$(srcdir)/../../build-aux/depcomp \
$(srcdir)/../../build-aux/install-sh \
- $(srcdir)/../../build-aux/missing $(srcdir)/Makefile.am \
+ $(srcdir)/../../build-aux/missing \
+ $(srcdir)/../../build-aux/mkinstalldirs $(srcdir)/Makefile.am \
$(srcdir)/Makefile.in $(top_srcdir)/configure \
$(top_srcdir)/lib/t1lib/sysconf.h.in \
../../build-aux/config.guess ../../build-aux/config.sub \
../../build-aux/depcomp ../../build-aux/install-sh \
../../build-aux/ltmain.sh ../../build-aux/missing \
- ../../build-aux/texinfo.tex ../../build-aux/ylwrap ChangeLog
+ ../../build-aux/mkinstalldirs ../../build-aux/texinfo.tex \
+ ../../build-aux/ylwrap ChangeLog
ACLOCAL_M4 = $(top_srcdir)/aclocal.m4
am__aclocal_m4_deps = $(top_srcdir)/configure.ac
am__configure_deps = $(am__aclocal_m4_deps) $(CONFIGURE_DEPENDENCIES) \
$(ACLOCAL_M4)
am__CONFIG_DISTCLEAN_FILES = config.status config.cache config.log \
configure.lineno config.status.lineno
-mkinstalldirs = $(install_sh) -d
+mkinstalldirs = $(SHELL) $(top_srcdir)/../../build-aux/mkinstalldirs
CONFIG_HEADER = $(top_builddir)/lib/t1lib/sysconf.h
CONFIG_CLEAN_FILES = t1lib.h lib/t1lib/t1lib.h
LIBRARIES = $(noinst_LIBRARIES)
diff --git a/Build/source/libs/teckit/Makefile.in b/Build/source/libs/teckit/Makefile.in
index 9fcd3dea042..f41c2d5400b 100644
--- a/Build/source/libs/teckit/Makefile.in
+++ b/Build/source/libs/teckit/Makefile.in
@@ -35,13 +35,15 @@ subdir = .
DIST_COMMON = README $(am__configure_deps) $(noinst_HEADERS) \
$(srcdir)/../../build-aux/depcomp \
$(srcdir)/../../build-aux/install-sh \
- $(srcdir)/../../build-aux/missing $(srcdir)/Makefile.am \
+ $(srcdir)/../../build-aux/missing \
+ $(srcdir)/../../build-aux/mkinstalldirs $(srcdir)/Makefile.am \
$(srcdir)/Makefile.in $(srcdir)/config.h.in \
$(top_srcdir)/configure ../../build-aux/config.guess \
../../build-aux/config.sub ../../build-aux/depcomp \
../../build-aux/install-sh ../../build-aux/ltmain.sh \
- ../../build-aux/missing ../../build-aux/texinfo.tex \
- ../../build-aux/ylwrap AUTHORS COPYING ChangeLog INSTALL NEWS
+ ../../build-aux/missing ../../build-aux/mkinstalldirs \
+ ../../build-aux/texinfo.tex ../../build-aux/ylwrap AUTHORS \
+ COPYING ChangeLog INSTALL NEWS
ACLOCAL_M4 = $(top_srcdir)/aclocal.m4
am__aclocal_m4_deps = $(top_srcdir)/../../m4/kpse-common.m4 \
$(top_srcdir)/../../m4/kpse-zlib-flags.m4 \
@@ -50,7 +52,7 @@ am__configure_deps = $(am__aclocal_m4_deps) $(CONFIGURE_DEPENDENCIES) \
$(ACLOCAL_M4)
am__CONFIG_DISTCLEAN_FILES = config.status config.cache config.log \
configure.lineno config.status.lineno
-mkinstalldirs = $(install_sh) -d
+mkinstalldirs = $(SHELL) $(top_srcdir)/../../build-aux/mkinstalldirs
CONFIG_HEADER = config.h
CONFIG_CLEAN_FILES =
LIBRARIES = $(noinst_LIBRARIES)
diff --git a/Build/source/libs/xpdf/Makefile.in b/Build/source/libs/xpdf/Makefile.in
index 03c1e70ee6d..018a801fca5 100644
--- a/Build/source/libs/xpdf/Makefile.in
+++ b/Build/source/libs/xpdf/Makefile.in
@@ -33,20 +33,21 @@ POST_UNINSTALL = :
subdir = .
DIST_COMMON = $(am__configure_deps) $(srcdir)/../../build-aux/depcomp \
$(srcdir)/../../build-aux/install-sh \
- $(srcdir)/../../build-aux/missing $(srcdir)/Makefile.am \
+ $(srcdir)/../../build-aux/missing \
+ $(srcdir)/../../build-aux/mkinstalldirs $(srcdir)/Makefile.am \
$(srcdir)/Makefile.in $(srcdir)/aconf.h.in \
$(top_srcdir)/configure ../../build-aux/config.guess \
../../build-aux/config.sub ../../build-aux/depcomp \
../../build-aux/install-sh ../../build-aux/ltmain.sh \
- ../../build-aux/missing ../../build-aux/texinfo.tex \
- ../../build-aux/ylwrap ChangeLog
+ ../../build-aux/missing ../../build-aux/mkinstalldirs \
+ ../../build-aux/texinfo.tex ../../build-aux/ylwrap ChangeLog
ACLOCAL_M4 = $(top_srcdir)/aclocal.m4
am__aclocal_m4_deps = $(top_srcdir)/configure.ac
am__configure_deps = $(am__aclocal_m4_deps) $(CONFIGURE_DEPENDENCIES) \
$(ACLOCAL_M4)
am__CONFIG_DISTCLEAN_FILES = config.status config.cache config.log \
configure.lineno config.status.lineno
-mkinstalldirs = $(install_sh) -d
+mkinstalldirs = $(SHELL) $(top_srcdir)/../../build-aux/mkinstalldirs
CONFIG_HEADER = aconf.h
CONFIG_CLEAN_FILES = aconf2.h
LIBRARIES = $(noinst_LIBRARIES)
diff --git a/Build/source/libs/xpdf/fofi/Makefile.in b/Build/source/libs/xpdf/fofi/Makefile.in
index 74690e2506d..7692225abe8 100644
--- a/Build/source/libs/xpdf/fofi/Makefile.in
+++ b/Build/source/libs/xpdf/fofi/Makefile.in
@@ -36,7 +36,7 @@ ACLOCAL_M4 = $(top_srcdir)/aclocal.m4
am__aclocal_m4_deps = $(top_srcdir)/configure.ac
am__configure_deps = $(am__aclocal_m4_deps) $(CONFIGURE_DEPENDENCIES) \
$(ACLOCAL_M4)
-mkinstalldirs = $(install_sh) -d
+mkinstalldirs = $(SHELL) $(top_srcdir)/../../build-aux/mkinstalldirs
CONFIG_HEADER = $(top_builddir)/aconf.h
CONFIG_CLEAN_FILES =
SOURCES =
diff --git a/Build/source/libs/xpdf/goo/Makefile.in b/Build/source/libs/xpdf/goo/Makefile.in
index 6dbcfa7e99e..b94d8de960f 100644
--- a/Build/source/libs/xpdf/goo/Makefile.in
+++ b/Build/source/libs/xpdf/goo/Makefile.in
@@ -36,7 +36,7 @@ ACLOCAL_M4 = $(top_srcdir)/aclocal.m4
am__aclocal_m4_deps = $(top_srcdir)/configure.ac
am__configure_deps = $(am__aclocal_m4_deps) $(CONFIGURE_DEPENDENCIES) \
$(ACLOCAL_M4)
-mkinstalldirs = $(install_sh) -d
+mkinstalldirs = $(SHELL) $(top_srcdir)/../../build-aux/mkinstalldirs
CONFIG_HEADER = $(top_builddir)/aconf.h
CONFIG_CLEAN_FILES =
SOURCES =
diff --git a/Build/source/libs/xpdf/xpdf/Makefile.in b/Build/source/libs/xpdf/xpdf/Makefile.in
index 3fc89a36d78..6dc7cc6b46a 100644
--- a/Build/source/libs/xpdf/xpdf/Makefile.in
+++ b/Build/source/libs/xpdf/xpdf/Makefile.in
@@ -36,7 +36,7 @@ ACLOCAL_M4 = $(top_srcdir)/aclocal.m4
am__aclocal_m4_deps = $(top_srcdir)/configure.ac
am__configure_deps = $(am__aclocal_m4_deps) $(CONFIGURE_DEPENDENCIES) \
$(ACLOCAL_M4)
-mkinstalldirs = $(install_sh) -d
+mkinstalldirs = $(SHELL) $(top_srcdir)/../../build-aux/mkinstalldirs
CONFIG_HEADER = $(top_builddir)/aconf.h
CONFIG_CLEAN_FILES =
SOURCES =
diff --git a/Build/source/libs/zlib/Makefile.in b/Build/source/libs/zlib/Makefile.in
index d68347c2967..d3214a4572b 100644
--- a/Build/source/libs/zlib/Makefile.in
+++ b/Build/source/libs/zlib/Makefile.in
@@ -36,20 +36,21 @@ DIST_COMMON = README $(am__configure_deps) \
$(am__dist_check_SCRIPTS_DIST) \
$(srcdir)/../../build-aux/depcomp \
$(srcdir)/../../build-aux/install-sh \
- $(srcdir)/../../build-aux/missing $(srcdir)/Makefile.am \
+ $(srcdir)/../../build-aux/missing \
+ $(srcdir)/../../build-aux/mkinstalldirs $(srcdir)/Makefile.am \
$(srcdir)/Makefile.in $(srcdir)/config.h.in \
$(top_srcdir)/configure ../../build-aux/config.guess \
../../build-aux/config.sub ../../build-aux/depcomp \
../../build-aux/install-sh ../../build-aux/ltmain.sh \
- ../../build-aux/missing ../../build-aux/texinfo.tex \
- ../../build-aux/ylwrap ChangeLog
+ ../../build-aux/missing ../../build-aux/mkinstalldirs \
+ ../../build-aux/texinfo.tex ../../build-aux/ylwrap ChangeLog
ACLOCAL_M4 = $(top_srcdir)/aclocal.m4
am__aclocal_m4_deps = $(top_srcdir)/configure.ac
am__configure_deps = $(am__aclocal_m4_deps) $(CONFIGURE_DEPENDENCIES) \
$(ACLOCAL_M4)
am__CONFIG_DISTCLEAN_FILES = config.status config.cache config.log \
configure.lineno config.status.lineno
-mkinstalldirs = $(install_sh) -d
+mkinstalldirs = $(SHELL) $(top_srcdir)/../../build-aux/mkinstalldirs
CONFIG_HEADER = config.h
CONFIG_CLEAN_FILES = zlib.h
LIBRARIES = $(noinst_LIBRARIES)
diff --git a/Build/source/m4/kpse-setup.m4 b/Build/source/m4/kpse-setup.m4
index ba91141435b..de7a6e66df2 100644
--- a/Build/source/m4/kpse-setup.m4
+++ b/Build/source/m4/kpse-setup.m4
@@ -48,13 +48,9 @@ KPSE_OPTIONS
KPSE_ENABLE_CXX_HACK
KPSE_LIBS_PREPARE
KPSE_WEB2C_PREPARE
-m4_sinclude(kpse_TL[ac/withenable.ac])
-m4_sinclude(kpse_TL[utils/ac/withenable.ac])
KPSE_FOR_PKGS([utils], [m4_sinclude(kpse_TL[utils/]Kpse_Pkg[/ac/withenable.ac])])
-m4_sinclude(kpse_TL[texk/ac/withenable.ac])
KPSE_FOR_PKGS([texk], [m4_sinclude(kpse_TL[texk/]Kpse_Pkg[/ac/withenable.ac])])
m4_sinclude(kpse_TL[texk/kpathsea/ac/withenable.ac])
-m4_sinclude(kpse_TL[libs/ac/withenable.ac])
KPSE_FOR_PKGS([libs], [m4_sinclude(kpse_TL[libs/]Kpse_Pkg[/ac/withenable.ac])])
]) # KPSE_SETUP
diff --git a/Build/source/reautoconf b/Build/source/reautoconf
index 57d2d011f13..bac114fcf79 100755
--- a/Build/source/reautoconf
+++ b/Build/source/reautoconf
@@ -20,37 +20,27 @@
# You should have received a copy of the GNU General Public License
# along with this program. If not, see <http://www.gnu.org/licenses/>.
-echo "The TeX Live build system is currently under reconstruction"
-exit 1
-
unset CDPATH
usage="Usage: $0 [OPTION]... [DIR]...
- Run \`aclocal' (if applicable) and \`autoconf' in a selection
- of the directories DIR... (default all) in TeX Live source tree.
+ Run \`autoreconf --no-recursive' in the directories DIR...
+ (default all) of the TeX Live source tree.
Options:
-h, --help display this help and exit successfully
- -f, --force include some optional packages
-n, --dry-run don't run any commands; just print them
-q, --quiet don't echo commands
-v, --verbose verbosely report processing (default)
-Selection:
- packages using KPSE macros are included
- packages using automake are excluded
- packages using GNU autoconf 2.60 or later:
- with \`--force' included, otherwise excluded
- packages using old autoconf versions are excluded
-
Environment variables:
- TL_ACLOCAL: program to use instead of aclocal from PATH
TL_AUTOCONF: program to use instead of autoconf from PATH
- TL_AUTOHEADER: program to use instead of autoheader from PATH"
+ TL_AUTOHEADER: program to use instead of autoheader from PATH
+ TL_AUTOMAKE: program to use instead of automake from PATH
+ TL_ACLOCAL: program to use instead of aclocal from PATH"
-force=no
do_cmd=eval
do_say=echo
+verbose=-v
list=
@@ -59,13 +49,11 @@ do
case $option in
-h | --help) echo "$usage"; exit 0
;;
- -f | --force) force=yes
- ;;
-n | --dry-run) do_cmd=:
;;
- -q | --quiet) do_say=:
+ -q | --quiet) do_say=:; verbose=
;;
- -v | --verbose) do_say=echo
+ -v | --verbose) do_say=echo; verbose=-v
;;
-*) echo "$0: *** unrecognized option \`$option'"
echo "$usage"; exit 1
@@ -77,77 +65,65 @@ done
[ "$do_cmd" = : ] && do_say=echo # -n implies -v
-[ -f ./texk/make/common.mk ] || {
- echo "$0: *** can't find ./texk/make/common.mk (from `pwd`)" >&2
+[ -f ./m4/kpse-setup.m4 ] || {
+ echo "$0: *** can't find ./m4/kpse-setup.m4 (from `pwd`)" >&2
exit 1
}
-: ${TL_ACLOCAL=aclocal}
-echo "$0: using \"$TL_ACLOCAL\" = `$TL_ACLOCAL --version | sed 1q`"
-echo "$0: if you want to use a different aclocal, set TL_ACLOCAL."
: ${TL_AUTOCONF=autoconf}
echo "$0: using \"$TL_AUTOCONF\" = `$TL_AUTOCONF --version | sed 1q`"
-echo "$0: if you want to use a different autoconf, set TL_AUTOCONF."
: ${TL_AUTOHEADER=autoheader}
echo "$0: using \"$TL_AUTOHEADER\" = `$TL_AUTOHEADER --version | sed 1q`"
-echo "$0: if you want to use a different autoheader, set TL_AUTOHEADER."
+: ${TL_AUTOMAKE=automake}
+echo "$0: using \"$TL_AUTOMAKE\" = `$TL_AUTOMAKE --version | sed 1q`"
+: ${TL_ACLOCAL=aclocal}
+echo "$0: using \"$TL_ACLOCAL\" = `$TL_ACLOCAL --version | sed 1q`"
+echo "$0: if you want to use different versions, set TL_AUTOCONF,"
+echo "$0: TL_AUTOHEADER, TL_AUTOMAKE, and/or TL_ACLOCAL."
# Give users a chance to quit here
-# and set TL_ACLOCAL, TL_AUTOCONF and/or TL_AUTOHEADER
+# and set TL_AUTOCONF, TL_AUTOHEADER, TL_AUTOMAKE, and/or TL_ACLOCAL
$do_cmd sleep 5
+AUTOCONF=$TL_AUTOCONF
+AUTOHEADER=$TL_AUTOHEADER
+AUTOMAKE=$TL_AUTOMAKE
+ACLOCAL=$TL_ACLOCAL
+export AUTOCONF AUTOHEADER AUTOMAKE ACLOCAL
+
do_it () {
$do_say "$0: running \"$@\""
$do_cmd "$@"
}
-# process one directory
-do_one () { # $base=configure.{in,ac}, $dir=current, $dir/$rdir->./texk/m4 with the KPSE macros
- if grep 'AM_INIT_AUTOMAKE' $base >/dev/null 2>&1; then
- $do_say "$0: $dir/$base ... uses automake, skipped."
- elif grep 'm4_include(\['$rdir'/kpse_.*\.m4])' aclocal.m4 >/dev/null 2>&1; then
- $do_say "$0: $dir/$base ... uses KPSE macros"
- do_it "$TL_ACLOCAL -I $rdir && date >stamp-aclocal"
- if grep '^kpse_include \.\./make/config.mk$' Makefile.in >/dev/null 2>&1; then
- do_it "$TL_AUTOHEADER && date >stamp-auto.in"
- fi
- do_it "$TL_AUTOCONF && date >stamp-configure"
- elif grep '# Generated by GNU Autoconf 2.6' configure >/dev/null 2>&1; then
- if test "$force" = yes; then
- $do_say "$0: $dir/$base ... uses modern autoconf, forced"
- do_it $TL_AUTOCONF
- else
- $do_say "$0: $dir/$base ... uses modern autoconf, skipped"
- fi
- else
- $do_say "$0: $dir/$base ... uses older autoconf, skipped."
- fi
-}
-
if test "x$list" = x; then
- list=". `find libs utils texk -name configure.in -o -name configure.ac |
- sed 's,/configure\...\$,,'`"
+ list=". libs utils texk `find libs utils texk -type d -name ac |
+ sed 's,/ac\$,,'`"
fi
-# Autoconf in all directories
+# Autoreconf in all directories
for dir in $list; do
+ # Remove trailing slash from shell filename completion
+ dir=`echo $dir | sed 's,/\$,,'`
if test ! -d "$dir"; then
echo "$0: $dir not a directory, skipping." >&2
continue
- elif test -f "$dir/configure.in"; then
- base=configure.in
- elif test -f "$dir/configure.ac"; then
- base=configure.ac
- else
+ fi
+ if test ! -f "$dir/configure.ac"; then
+ echo "$0: $dir/configure.ac: no such file, skipping." >&2
continue
fi
+ extra_dirs=
case $dir in
- .) rdir=texk/m4 ;;
- texk) rdir=m4 ;;
- texk/*) rdir=`echo $dir | sed -e 's,^texk/,,' -e 's,[^/]*,..,g'`/m4 ;;
- *) rdir=`echo $dir | sed 's,[^/]*,..,g'`/texk/m4 ;;
+ .) ;;
+ libs | utils | texk)
+ extra_dirs=$dir/dummy ;;
+ *) if test -f "$dir/ac/withenable.ac"; then
+ extra_dirs=`grep 'dnl extra_dirs = ' $dir/ac/withenable.ac |
+ sed 's,^.*= ,,'`
+ fi ;;
esac
- (cd $dir; do_one)
+ do_it "autoreconf $verbose --no-recursive $dir $extra_dirs"
done
echo "$0: done."
diff --git a/Build/source/texk/Makefile.in b/Build/source/texk/Makefile.in
index 86f31f14036..b5e833adb0d 100644
--- a/Build/source/texk/Makefile.in
+++ b/Build/source/texk/Makefile.in
@@ -37,12 +37,14 @@ DIST_COMMON = README $(am__configure_deps) \
$(srcdir)/../build-aux/config.guess \
$(srcdir)/../build-aux/config.sub \
$(srcdir)/../build-aux/install-sh \
- $(srcdir)/../build-aux/missing $(srcdir)/Makefile.am \
+ $(srcdir)/../build-aux/missing \
+ $(srcdir)/../build-aux/mkinstalldirs $(srcdir)/Makefile.am \
$(srcdir)/Makefile.in $(top_srcdir)/configure \
../build-aux/config.guess ../build-aux/config.sub \
../build-aux/depcomp ../build-aux/install-sh \
../build-aux/ltmain.sh ../build-aux/missing \
- ../build-aux/texinfo.tex ../build-aux/ylwrap ChangeLog
+ ../build-aux/mkinstalldirs ../build-aux/texinfo.tex \
+ ../build-aux/ylwrap ChangeLog
ACLOCAL_M4 = $(top_srcdir)/aclocal.m4
am__aclocal_m4_deps = $(top_srcdir)/../m4/kpse-common.m4 \
$(top_srcdir)/../m4/kpse-cxx-hack.m4 \
@@ -60,8 +62,6 @@ am__aclocal_m4_deps = $(top_srcdir)/../m4/kpse-common.m4 \
$(top_srcdir)/../m4/kpse-web2c.m4 \
$(top_srcdir)/../m4/kpse-xpdf-flags.m4 \
$(top_srcdir)/../m4/kpse-zlib-flags.m4 \
- $(top_srcdir)/../ac/withenable.ac \
- $(top_srcdir)/../utils/ac/withenable.ac \
$(top_srcdir)/../utils/dialog/ac/withenable.ac \
$(top_srcdir)/../utils/pdfopen/ac/withenable.ac \
$(top_srcdir)/../utils/ps2eps/ac/withenable.ac \
@@ -71,7 +71,6 @@ am__aclocal_m4_deps = $(top_srcdir)/../m4/kpse-common.m4 \
$(top_srcdir)/../utils/vlna/ac/withenable.ac \
$(top_srcdir)/../utils/xindy/ac/withenable.ac \
$(top_srcdir)/../utils/xindy/ac/xindy.ac \
- $(top_srcdir)/../texk/ac/withenable.ac \
$(top_srcdir)/../texk/web2c/ac/withenable.ac \
$(top_srcdir)/../texk/web2c/ac/web2c.ac \
$(top_srcdir)/../texk/afm2pl/ac/withenable.ac \
@@ -108,7 +107,6 @@ am__aclocal_m4_deps = $(top_srcdir)/../m4/kpse-common.m4 \
$(top_srcdir)/../texk/texlive/ac/withenable.ac \
$(top_srcdir)/../texk/kpathsea/ac/withenable.ac \
$(top_srcdir)/../texk/kpathsea/ac/web2c.ac \
- $(top_srcdir)/../libs/ac/withenable.ac \
$(top_srcdir)/../libs/icu/ac/withenable.ac \
$(top_srcdir)/../libs/teckit/ac/withenable.ac \
$(top_srcdir)/../libs/graphite/ac/withenable.ac \
@@ -125,7 +123,7 @@ am__configure_deps = $(am__aclocal_m4_deps) $(CONFIGURE_DEPENDENCIES) \
$(ACLOCAL_M4)
am__CONFIG_DISTCLEAN_FILES = config.status config.cache config.log \
configure.lineno config.status.lineno
-mkinstalldirs = $(install_sh) -d
+mkinstalldirs = $(SHELL) $(top_srcdir)/../build-aux/mkinstalldirs
CONFIG_CLEAN_FILES =
SOURCES =
DIST_SOURCES =
diff --git a/Build/source/texk/ac/withenable.ac b/Build/source/texk/ac/withenable.ac
deleted file mode 100644
index 74eb1ee4c57..00000000000
--- a/Build/source/texk/ac/withenable.ac
+++ /dev/null
@@ -1,4 +0,0 @@
-## texk/ac/withenable.ac: configure.ac fragment for the TeX Live subdirectory texk/
-dnl
-dnl Copyright (C) 2009 Peter Breitenlohner <tex-live@tug.org>
-dnl You may freely use, modify and/or distribute this file.
diff --git a/Build/source/texk/afm2pl/Makefile.in b/Build/source/texk/afm2pl/Makefile.in
index b568e991ff8..ebeb43941b0 100644
--- a/Build/source/texk/afm2pl/Makefile.in
+++ b/Build/source/texk/afm2pl/Makefile.in
@@ -40,13 +40,15 @@ DIST_COMMON = README $(am__configure_deps) $(dist_man1_MANS) \
$(srcdir)/../../build-aux/depcomp \
$(srcdir)/../../build-aux/install-sh \
$(srcdir)/../../build-aux/ltmain.sh \
- $(srcdir)/../../build-aux/missing $(srcdir)/Makefile.am \
+ $(srcdir)/../../build-aux/missing \
+ $(srcdir)/../../build-aux/mkinstalldirs $(srcdir)/Makefile.am \
$(srcdir)/Makefile.in $(srcdir)/c-auto.in \
$(top_srcdir)/configure ../../build-aux/config.guess \
../../build-aux/config.sub ../../build-aux/depcomp \
../../build-aux/install-sh ../../build-aux/ltmain.sh \
- ../../build-aux/missing ../../build-aux/texinfo.tex \
- ../../build-aux/ylwrap COPYING ChangeLog
+ ../../build-aux/missing ../../build-aux/mkinstalldirs \
+ ../../build-aux/texinfo.tex ../../build-aux/ylwrap COPYING \
+ ChangeLog
ACLOCAL_M4 = $(top_srcdir)/aclocal.m4
am__aclocal_m4_deps = $(top_srcdir)/../../m4/kpse-common.m4 \
$(top_srcdir)/../../m4/kpse-kpathsea-flags.m4 \
@@ -60,7 +62,7 @@ am__configure_deps = $(am__aclocal_m4_deps) $(CONFIGURE_DEPENDENCIES) \
$(ACLOCAL_M4)
am__CONFIG_DISTCLEAN_FILES = config.status config.cache config.log \
configure.lineno config.status.lineno
-mkinstalldirs = $(install_sh) -d
+mkinstalldirs = $(SHELL) $(top_srcdir)/../../build-aux/mkinstalldirs
CONFIG_HEADER = c-auto.h
CONFIG_CLEAN_FILES =
am__installdirs = "$(DESTDIR)$(bindir)" "$(DESTDIR)$(man1dir)"
diff --git a/Build/source/texk/bibtex8/Makefile.in b/Build/source/texk/bibtex8/Makefile.in
index af7f5eb5752..c64c0fc1b33 100644
--- a/Build/source/texk/bibtex8/Makefile.in
+++ b/Build/source/texk/bibtex8/Makefile.in
@@ -40,13 +40,14 @@ DIST_COMMON = $(am__configure_deps) \
$(srcdir)/../../build-aux/depcomp \
$(srcdir)/../../build-aux/install-sh \
$(srcdir)/../../build-aux/ltmain.sh \
- $(srcdir)/../../build-aux/missing $(srcdir)/Makefile.am \
+ $(srcdir)/../../build-aux/missing \
+ $(srcdir)/../../build-aux/mkinstalldirs $(srcdir)/Makefile.am \
$(srcdir)/Makefile.in $(top_srcdir)/configure \
../../build-aux/config.guess ../../build-aux/config.sub \
../../build-aux/depcomp ../../build-aux/install-sh \
../../build-aux/ltmain.sh ../../build-aux/missing \
- ../../build-aux/texinfo.tex ../../build-aux/ylwrap COPYING \
- ChangeLog
+ ../../build-aux/mkinstalldirs ../../build-aux/texinfo.tex \
+ ../../build-aux/ylwrap COPYING ChangeLog
ACLOCAL_M4 = $(top_srcdir)/aclocal.m4
am__aclocal_m4_deps = $(top_srcdir)/../../m4/kpse-common.m4 \
$(top_srcdir)/../../m4/kpse-kpathsea-flags.m4 \
@@ -60,7 +61,7 @@ am__configure_deps = $(am__aclocal_m4_deps) $(CONFIGURE_DEPENDENCIES) \
$(ACLOCAL_M4)
am__CONFIG_DISTCLEAN_FILES = config.status config.cache config.log \
configure.lineno config.status.lineno
-mkinstalldirs = $(install_sh) -d
+mkinstalldirs = $(SHELL) $(top_srcdir)/../../build-aux/mkinstalldirs
CONFIG_CLEAN_FILES =
am__installdirs = "$(DESTDIR)$(bindir)"
binPROGRAMS_INSTALL = $(INSTALL_PROGRAM)
diff --git a/Build/source/texk/cjkutils/Makefile.in b/Build/source/texk/cjkutils/Makefile.in
index 264b6feb109..50df8197888 100644
--- a/Build/source/texk/cjkutils/Makefile.in
+++ b/Build/source/texk/cjkutils/Makefile.in
@@ -37,12 +37,14 @@ DIST_COMMON = $(am__configure_deps) \
$(srcdir)/../../build-aux/config.sub \
$(srcdir)/../../build-aux/install-sh \
$(srcdir)/../../build-aux/ltmain.sh \
- $(srcdir)/../../build-aux/missing $(srcdir)/Makefile.am \
+ $(srcdir)/../../build-aux/missing \
+ $(srcdir)/../../build-aux/mkinstalldirs $(srcdir)/Makefile.am \
$(srcdir)/Makefile.in $(top_srcdir)/configure \
../../build-aux/config.guess ../../build-aux/config.sub \
../../build-aux/depcomp ../../build-aux/install-sh \
../../build-aux/ltmain.sh ../../build-aux/missing \
- ../../build-aux/texinfo.tex ../../build-aux/ylwrap ChangeLog
+ ../../build-aux/mkinstalldirs ../../build-aux/texinfo.tex \
+ ../../build-aux/ylwrap ChangeLog
ACLOCAL_M4 = $(top_srcdir)/aclocal.m4
am__aclocal_m4_deps = $(top_srcdir)/../../m4/kpse-common.m4 \
$(top_srcdir)/../../m4/kpse-kpathsea-flags.m4 \
@@ -56,7 +58,7 @@ am__configure_deps = $(am__aclocal_m4_deps) $(CONFIGURE_DEPENDENCIES) \
$(ACLOCAL_M4)
am__CONFIG_DISTCLEAN_FILES = config.status config.cache config.log \
configure.lineno config.status.lineno
-mkinstalldirs = $(install_sh) -d
+mkinstalldirs = $(SHELL) $(top_srcdir)/../../build-aux/mkinstalldirs
CONFIG_HEADER = $(top_builddir)/hbf2gf/c-auto.h
CONFIG_CLEAN_FILES =
SOURCES =
diff --git a/Build/source/texk/cjkutils/conv/Makefile.in b/Build/source/texk/cjkutils/conv/Makefile.in
index d7fb1d20613..08c19d9b63e 100644
--- a/Build/source/texk/cjkutils/conv/Makefile.in
+++ b/Build/source/texk/cjkutils/conv/Makefile.in
@@ -47,7 +47,7 @@ am__aclocal_m4_deps = $(top_srcdir)/../../m4/kpse-common.m4 \
$(top_srcdir)/configure.ac
am__configure_deps = $(am__aclocal_m4_deps) $(CONFIGURE_DEPENDENCIES) \
$(ACLOCAL_M4)
-mkinstalldirs = $(install_sh) -d
+mkinstalldirs = $(SHELL) $(top_srcdir)/../../build-aux/mkinstalldirs
CONFIG_HEADER = $(top_builddir)/hbf2gf/c-auto.h
CONFIG_CLEAN_FILES =
am__installdirs = "$(DESTDIR)$(bindir)"
diff --git a/Build/source/texk/cjkutils/hbf2gf/Makefile.in b/Build/source/texk/cjkutils/hbf2gf/Makefile.in
index 3dfe5a4955c..7018c7ddbb7 100644
--- a/Build/source/texk/cjkutils/hbf2gf/Makefile.in
+++ b/Build/source/texk/cjkutils/hbf2gf/Makefile.in
@@ -47,7 +47,7 @@ am__aclocal_m4_deps = $(top_srcdir)/../../m4/kpse-common.m4 \
$(top_srcdir)/configure.ac
am__configure_deps = $(am__aclocal_m4_deps) $(CONFIGURE_DEPENDENCIES) \
$(ACLOCAL_M4)
-mkinstalldirs = $(install_sh) -d
+mkinstalldirs = $(SHELL) $(top_srcdir)/../../build-aux/mkinstalldirs
CONFIG_HEADER = c-auto.h
CONFIG_CLEAN_FILES =
am__installdirs = "$(DESTDIR)$(bindir)" "$(DESTDIR)$(man1dir)"
diff --git a/Build/source/texk/cjkutils/scripts/Makefile.in b/Build/source/texk/cjkutils/scripts/Makefile.in
index bd5812f6ee9..b1555a2c421 100644
--- a/Build/source/texk/cjkutils/scripts/Makefile.in
+++ b/Build/source/texk/cjkutils/scripts/Makefile.in
@@ -48,7 +48,7 @@ am__aclocal_m4_deps = $(top_srcdir)/../../m4/kpse-common.m4 \
$(top_srcdir)/configure.ac
am__configure_deps = $(am__aclocal_m4_deps) $(CONFIGURE_DEPENDENCIES) \
$(ACLOCAL_M4)
-mkinstalldirs = $(install_sh) -d
+mkinstalldirs = $(SHELL) $(top_srcdir)/../../build-aux/mkinstalldirs
CONFIG_HEADER = $(top_builddir)/hbf2gf/c-auto.h
CONFIG_CLEAN_FILES =
am__installdirs = "$(DESTDIR)$(bindir)"
diff --git a/Build/source/texk/configure b/Build/source/texk/configure
index da8600f180a..00178542b77 100755
--- a/Build/source/texk/configure
+++ b/Build/source/texk/configure
@@ -2237,10 +2237,6 @@ fi
-## ac/withenable.ac: configure.ac fragment for the TeX Live top-level
-
-## utils/ac/withenable.ac: configure.ac fragment for the TeX Live subdirectory utils/
-
## utils/dialog/ac/withenable.ac: configure.ac fragment for the TeX Live subdirectory utils/dialog/
## configure options and TL libraries required for dialog
# Check whether --enable-dialog was given.
@@ -2378,8 +2374,6 @@ fi
-## texk/ac/withenable.ac: configure.ac fragment for the TeX Live subdirectory texk/
-
## texk/web2c/ac/withenable.ac: configure.ac fragment for the TeX Live subdirectory texk/web2c/
## configure options and TL libraries required for web2c
# Check whether --enable-web2c was given.
@@ -3270,8 +3264,6 @@ case $enable_mktextex_default in
esac
-## libs/ac/withenable.ac: configure.ac fragment for the TeX Live subdirectory libs/
-
## libs/icu/ac/withenable.ac: configure.ac fragment for the TeX Live subdirectory libs/icu/
## configure options and TL libraries required for icu (modified for XeTeX)
diff --git a/Build/source/texk/detex/Makefile.in b/Build/source/texk/detex/Makefile.in
index c50c7424e5e..09e9789ea66 100644
--- a/Build/source/texk/detex/Makefile.in
+++ b/Build/source/texk/detex/Makefile.in
@@ -41,13 +41,15 @@ DIST_COMMON = README $(am__configure_deps) $(dist_check_SCRIPTS) \
$(srcdir)/../../build-aux/install-sh \
$(srcdir)/../../build-aux/ltmain.sh \
$(srcdir)/../../build-aux/missing \
+ $(srcdir)/../../build-aux/mkinstalldirs \
$(srcdir)/../../build-aux/ylwrap $(srcdir)/Makefile.am \
$(srcdir)/Makefile.in $(srcdir)/c-auto.in \
$(top_srcdir)/configure ../../build-aux/config.guess \
../../build-aux/config.sub ../../build-aux/depcomp \
../../build-aux/install-sh ../../build-aux/ltmain.sh \
- ../../build-aux/missing ../../build-aux/texinfo.tex \
- ../../build-aux/ylwrap ChangeLog detex.c
+ ../../build-aux/missing ../../build-aux/mkinstalldirs \
+ ../../build-aux/texinfo.tex ../../build-aux/ylwrap ChangeLog \
+ detex.c
ACLOCAL_M4 = $(top_srcdir)/aclocal.m4
am__aclocal_m4_deps = $(top_srcdir)/../../m4/kpse-common.m4 \
$(top_srcdir)/../../m4/kpse-kpathsea-flags.m4 \
@@ -62,7 +64,7 @@ am__configure_deps = $(am__aclocal_m4_deps) $(CONFIGURE_DEPENDENCIES) \
$(ACLOCAL_M4)
am__CONFIG_DISTCLEAN_FILES = config.status config.cache config.log \
configure.lineno config.status.lineno
-mkinstalldirs = $(install_sh) -d
+mkinstalldirs = $(SHELL) $(top_srcdir)/../../build-aux/mkinstalldirs
CONFIG_HEADER = c-auto.h
CONFIG_CLEAN_FILES =
am__installdirs = "$(DESTDIR)$(bindir)" "$(DESTDIR)$(man1dir)"
diff --git a/Build/source/texk/devnag/Makefile.in b/Build/source/texk/devnag/Makefile.in
index 121aa1b808f..4b6235c7b07 100644
--- a/Build/source/texk/devnag/Makefile.in
+++ b/Build/source/texk/devnag/Makefile.in
@@ -32,20 +32,22 @@ POST_UNINSTALL = :
subdir = .
DIST_COMMON = README $(am__configure_deps) \
$(srcdir)/../../build-aux/install-sh \
- $(srcdir)/../../build-aux/missing $(srcdir)/Makefile.am \
+ $(srcdir)/../../build-aux/missing \
+ $(srcdir)/../../build-aux/mkinstalldirs $(srcdir)/Makefile.am \
$(srcdir)/Makefile.in $(srcdir)/config.h.in \
$(top_srcdir)/configure ../../build-aux/config.guess \
../../build-aux/config.sub ../../build-aux/depcomp \
../../build-aux/install-sh ../../build-aux/ltmain.sh \
- ../../build-aux/missing ../../build-aux/texinfo.tex \
- ../../build-aux/ylwrap AUTHORS COPYING ChangeLog INSTALL NEWS
+ ../../build-aux/missing ../../build-aux/mkinstalldirs \
+ ../../build-aux/texinfo.tex ../../build-aux/ylwrap AUTHORS \
+ COPYING ChangeLog INSTALL NEWS
ACLOCAL_M4 = $(top_srcdir)/aclocal.m4
am__aclocal_m4_deps = $(top_srcdir)/configure.ac
am__configure_deps = $(am__aclocal_m4_deps) $(CONFIGURE_DEPENDENCIES) \
$(ACLOCAL_M4)
am__CONFIG_DISTCLEAN_FILES = config.status config.cache config.log \
configure.lineno config.status.lineno
-mkinstalldirs = $(install_sh) -d
+mkinstalldirs = $(SHELL) $(top_srcdir)/../../build-aux/mkinstalldirs
CONFIG_HEADER = config.h
CONFIG_CLEAN_FILES =
SOURCES =
diff --git a/Build/source/texk/devnag/src/Makefile.in b/Build/source/texk/devnag/src/Makefile.in
index 620c687e553..c621ffa3f5b 100644
--- a/Build/source/texk/devnag/src/Makefile.in
+++ b/Build/source/texk/devnag/src/Makefile.in
@@ -37,7 +37,7 @@ ACLOCAL_M4 = $(top_srcdir)/aclocal.m4
am__aclocal_m4_deps = $(top_srcdir)/configure.ac
am__configure_deps = $(am__aclocal_m4_deps) $(CONFIGURE_DEPENDENCIES) \
$(ACLOCAL_M4)
-mkinstalldirs = $(install_sh) -d
+mkinstalldirs = $(SHELL) $(top_srcdir)/../../build-aux/mkinstalldirs
CONFIG_HEADER = $(top_builddir)/config.h
CONFIG_CLEAN_FILES =
am__installdirs = "$(DESTDIR)$(bindir)"
diff --git a/Build/source/texk/dtl/Makefile.in b/Build/source/texk/dtl/Makefile.in
index 72a156feedc..96916a29126 100644
--- a/Build/source/texk/dtl/Makefile.in
+++ b/Build/source/texk/dtl/Makefile.in
@@ -40,13 +40,14 @@ DIST_COMMON = README $(am__configure_deps) $(dist_check_SCRIPTS) \
$(srcdir)/../../build-aux/depcomp \
$(srcdir)/../../build-aux/install-sh \
$(srcdir)/../../build-aux/ltmain.sh \
- $(srcdir)/../../build-aux/missing $(srcdir)/Makefile.am \
+ $(srcdir)/../../build-aux/missing \
+ $(srcdir)/../../build-aux/mkinstalldirs $(srcdir)/Makefile.am \
$(srcdir)/Makefile.in $(srcdir)/config.h.in \
$(top_srcdir)/configure ../../build-aux/config.guess \
../../build-aux/config.sub ../../build-aux/depcomp \
../../build-aux/install-sh ../../build-aux/ltmain.sh \
- ../../build-aux/missing ../../build-aux/texinfo.tex \
- ../../build-aux/ylwrap ChangeLog
+ ../../build-aux/missing ../../build-aux/mkinstalldirs \
+ ../../build-aux/texinfo.tex ../../build-aux/ylwrap ChangeLog
ACLOCAL_M4 = $(top_srcdir)/aclocal.m4
am__aclocal_m4_deps = $(top_srcdir)/../../m4/kpse-common.m4 \
$(top_srcdir)/../../m4/kpse-kpathsea-flags.m4 \
@@ -60,7 +61,7 @@ am__configure_deps = $(am__aclocal_m4_deps) $(CONFIGURE_DEPENDENCIES) \
$(ACLOCAL_M4)
am__CONFIG_DISTCLEAN_FILES = config.status config.cache config.log \
configure.lineno config.status.lineno
-mkinstalldirs = $(install_sh) -d
+mkinstalldirs = $(SHELL) $(top_srcdir)/../../build-aux/mkinstalldirs
CONFIG_HEADER = config.h
CONFIG_CLEAN_FILES =
am__installdirs = "$(DESTDIR)$(bindir)" "$(DESTDIR)$(man1dir)"
diff --git a/Build/source/texk/dummy/Makefile.in b/Build/source/texk/dummy/Makefile.in
index 48348e26203..0ac4bbb356c 100644
--- a/Build/source/texk/dummy/Makefile.in
+++ b/Build/source/texk/dummy/Makefile.in
@@ -33,19 +33,21 @@ POST_UNINSTALL = :
subdir = .
DIST_COMMON = README $(am__configure_deps) \
$(srcdir)/../../build-aux/install-sh \
- $(srcdir)/../../build-aux/missing $(srcdir)/Makefile.am \
+ $(srcdir)/../../build-aux/missing \
+ $(srcdir)/../../build-aux/mkinstalldirs $(srcdir)/Makefile.am \
$(srcdir)/Makefile.in $(top_srcdir)/configure \
../../build-aux/config.guess ../../build-aux/config.sub \
../../build-aux/depcomp ../../build-aux/install-sh \
../../build-aux/ltmain.sh ../../build-aux/missing \
- ../../build-aux/texinfo.tex ../../build-aux/ylwrap
+ ../../build-aux/mkinstalldirs ../../build-aux/texinfo.tex \
+ ../../build-aux/ylwrap
ACLOCAL_M4 = $(top_srcdir)/aclocal.m4
am__aclocal_m4_deps = $(top_srcdir)/configure.ac
am__configure_deps = $(am__aclocal_m4_deps) $(CONFIGURE_DEPENDENCIES) \
$(ACLOCAL_M4)
am__CONFIG_DISTCLEAN_FILES = config.status config.cache config.log \
configure.lineno config.status.lineno
-mkinstalldirs = $(install_sh) -d
+mkinstalldirs = $(SHELL) $(top_srcdir)/../../build-aux/mkinstalldirs
CONFIG_CLEAN_FILES =
SOURCES =
DIST_SOURCES =
diff --git a/Build/source/texk/dvi2tty/Makefile.in b/Build/source/texk/dvi2tty/Makefile.in
index 7e33f6fcaa2..a58020a2295 100644
--- a/Build/source/texk/dvi2tty/Makefile.in
+++ b/Build/source/texk/dvi2tty/Makefile.in
@@ -40,13 +40,14 @@ DIST_COMMON = README $(am__configure_deps) $(dist_man1_MANS) \
$(srcdir)/../../build-aux/depcomp \
$(srcdir)/../../build-aux/install-sh \
$(srcdir)/../../build-aux/ltmain.sh \
- $(srcdir)/../../build-aux/missing $(srcdir)/Makefile.am \
+ $(srcdir)/../../build-aux/missing \
+ $(srcdir)/../../build-aux/mkinstalldirs $(srcdir)/Makefile.am \
$(srcdir)/Makefile.in $(srcdir)/c-auto.in \
$(top_srcdir)/configure ../../build-aux/config.guess \
../../build-aux/config.sub ../../build-aux/depcomp \
../../build-aux/install-sh ../../build-aux/ltmain.sh \
- ../../build-aux/missing ../../build-aux/texinfo.tex \
- ../../build-aux/ylwrap ChangeLog
+ ../../build-aux/missing ../../build-aux/mkinstalldirs \
+ ../../build-aux/texinfo.tex ../../build-aux/ylwrap ChangeLog
ACLOCAL_M4 = $(top_srcdir)/aclocal.m4
am__aclocal_m4_deps = $(top_srcdir)/../../m4/kpse-common.m4 \
$(top_srcdir)/../../m4/kpse-kpathsea-flags.m4 \
@@ -60,7 +61,7 @@ am__configure_deps = $(am__aclocal_m4_deps) $(CONFIGURE_DEPENDENCIES) \
$(ACLOCAL_M4)
am__CONFIG_DISTCLEAN_FILES = config.status config.cache config.log \
configure.lineno config.status.lineno
-mkinstalldirs = $(install_sh) -d
+mkinstalldirs = $(SHELL) $(top_srcdir)/../../build-aux/mkinstalldirs
CONFIG_HEADER = c-auto.h
CONFIG_CLEAN_FILES =
am__installdirs = "$(DESTDIR)$(bindir)" "$(DESTDIR)$(man1dir)"
diff --git a/Build/source/texk/dvidvi/Makefile.in b/Build/source/texk/dvidvi/Makefile.in
index d4d9fea1e76..9b0df40358d 100644
--- a/Build/source/texk/dvidvi/Makefile.in
+++ b/Build/source/texk/dvidvi/Makefile.in
@@ -40,13 +40,14 @@ DIST_COMMON = $(am__configure_deps) $(dist_man1_MANS) \
$(srcdir)/../../build-aux/depcomp \
$(srcdir)/../../build-aux/install-sh \
$(srcdir)/../../build-aux/ltmain.sh \
- $(srcdir)/../../build-aux/missing $(srcdir)/Makefile.am \
+ $(srcdir)/../../build-aux/missing \
+ $(srcdir)/../../build-aux/mkinstalldirs $(srcdir)/Makefile.am \
$(srcdir)/Makefile.in $(srcdir)/config.h.in \
$(top_srcdir)/configure ../../build-aux/config.guess \
../../build-aux/config.sub ../../build-aux/depcomp \
../../build-aux/install-sh ../../build-aux/ltmain.sh \
- ../../build-aux/missing ../../build-aux/texinfo.tex \
- ../../build-aux/ylwrap ChangeLog
+ ../../build-aux/missing ../../build-aux/mkinstalldirs \
+ ../../build-aux/texinfo.tex ../../build-aux/ylwrap ChangeLog
ACLOCAL_M4 = $(top_srcdir)/aclocal.m4
am__aclocal_m4_deps = $(top_srcdir)/../../m4/kpse-common.m4 \
$(top_srcdir)/../../m4/kpse-kpathsea-flags.m4 \
@@ -60,7 +61,7 @@ am__configure_deps = $(am__aclocal_m4_deps) $(CONFIGURE_DEPENDENCIES) \
$(ACLOCAL_M4)
am__CONFIG_DISTCLEAN_FILES = config.status config.cache config.log \
configure.lineno config.status.lineno
-mkinstalldirs = $(install_sh) -d
+mkinstalldirs = $(SHELL) $(top_srcdir)/../../build-aux/mkinstalldirs
CONFIG_HEADER = config.h
CONFIG_CLEAN_FILES =
am__installdirs = "$(DESTDIR)$(bindir)" "$(DESTDIR)$(man1dir)"
diff --git a/Build/source/texk/dviljk/Makefile.in b/Build/source/texk/dviljk/Makefile.in
index 83a19c3d01d..6bb94a44643 100644
--- a/Build/source/texk/dviljk/Makefile.in
+++ b/Build/source/texk/dviljk/Makefile.in
@@ -43,13 +43,15 @@ DIST_COMMON = README $(am__configure_deps) $(dist_bin_SCRIPTS) \
$(srcdir)/../../build-aux/depcomp \
$(srcdir)/../../build-aux/install-sh \
$(srcdir)/../../build-aux/ltmain.sh \
- $(srcdir)/../../build-aux/missing $(srcdir)/Makefile.am \
+ $(srcdir)/../../build-aux/missing \
+ $(srcdir)/../../build-aux/mkinstalldirs $(srcdir)/Makefile.am \
$(srcdir)/Makefile.in $(srcdir)/c-auto.in \
$(top_srcdir)/configure ../../build-aux/config.guess \
../../build-aux/config.sub ../../build-aux/depcomp \
../../build-aux/install-sh ../../build-aux/ltmain.sh \
- ../../build-aux/missing ../../build-aux/texinfo.tex \
- ../../build-aux/ylwrap AUTHORS ChangeLog INSTALL NEWS
+ ../../build-aux/missing ../../build-aux/mkinstalldirs \
+ ../../build-aux/texinfo.tex ../../build-aux/ylwrap AUTHORS \
+ ChangeLog INSTALL NEWS
ACLOCAL_M4 = $(top_srcdir)/aclocal.m4
am__aclocal_m4_deps = $(top_srcdir)/../../m4/kpse-common.m4 \
$(top_srcdir)/../../m4/kpse-kpathsea-flags.m4 \
@@ -63,7 +65,7 @@ am__configure_deps = $(am__aclocal_m4_deps) $(CONFIGURE_DEPENDENCIES) \
$(ACLOCAL_M4)
am__CONFIG_DISTCLEAN_FILES = config.status config.cache config.log \
configure.lineno config.status.lineno
-mkinstalldirs = $(install_sh) -d
+mkinstalldirs = $(SHELL) $(top_srcdir)/../../build-aux/mkinstalldirs
CONFIG_HEADER = c-auto.h
CONFIG_CLEAN_FILES =
LIBRARIES = $(noinst_LIBRARIES)
diff --git a/Build/source/texk/dvipdfm/Makefile.in b/Build/source/texk/dvipdfm/Makefile.in
index ae4c75040f9..10969185078 100644
--- a/Build/source/texk/dvipdfm/Makefile.in
+++ b/Build/source/texk/dvipdfm/Makefile.in
@@ -42,14 +42,15 @@ DIST_COMMON = README $(am__configure_deps) $(dist_bin_SCRIPTS) \
$(srcdir)/../../build-aux/depcomp \
$(srcdir)/../../build-aux/install-sh \
$(srcdir)/../../build-aux/ltmain.sh \
- $(srcdir)/../../build-aux/missing $(srcdir)/Makefile.am \
+ $(srcdir)/../../build-aux/missing \
+ $(srcdir)/../../build-aux/mkinstalldirs $(srcdir)/Makefile.am \
$(srcdir)/Makefile.in $(srcdir)/config.h.in \
$(top_srcdir)/configure ../../build-aux/config.guess \
../../build-aux/config.sub ../../build-aux/depcomp \
../../build-aux/install-sh ../../build-aux/ltmain.sh \
- ../../build-aux/missing ../../build-aux/texinfo.tex \
- ../../build-aux/ylwrap AUTHORS COPYING ChangeLog INSTALL NEWS \
- TODO
+ ../../build-aux/missing ../../build-aux/mkinstalldirs \
+ ../../build-aux/texinfo.tex ../../build-aux/ylwrap AUTHORS \
+ COPYING ChangeLog INSTALL NEWS TODO
ACLOCAL_M4 = $(top_srcdir)/aclocal.m4
am__aclocal_m4_deps = $(top_srcdir)/../../m4/cho-libs.m4 \
$(top_srcdir)/../../m4/kpse-common.m4 \
@@ -66,7 +67,7 @@ am__configure_deps = $(am__aclocal_m4_deps) $(CONFIGURE_DEPENDENCIES) \
$(ACLOCAL_M4)
am__CONFIG_DISTCLEAN_FILES = config.status config.cache config.log \
configure.lineno config.status.lineno
-mkinstalldirs = $(install_sh) -d
+mkinstalldirs = $(SHELL) $(top_srcdir)/../../build-aux/mkinstalldirs
CONFIG_HEADER = config.h
CONFIG_CLEAN_FILES =
am__installdirs = "$(DESTDIR)$(bindir)" "$(DESTDIR)$(bindir)" \
diff --git a/Build/source/texk/dvipng/Makefile.in b/Build/source/texk/dvipng/Makefile.in
index 610f1f5d6dd..112635b5610 100644
--- a/Build/source/texk/dvipng/Makefile.in
+++ b/Build/source/texk/dvipng/Makefile.in
@@ -46,14 +46,15 @@ DIST_COMMON = README $(am__configure_deps) $(dist_man1_MANS) \
$(srcdir)/../../build-aux/install-sh \
$(srcdir)/../../build-aux/ltmain.sh \
$(srcdir)/../../build-aux/missing \
+ $(srcdir)/../../build-aux/mkinstalldirs \
$(srcdir)/../../build-aux/texinfo.tex $(srcdir)/Makefile.am \
$(srcdir)/Makefile.in $(srcdir)/config.h.in \
$(top_srcdir)/configure ../../build-aux/config.guess \
../../build-aux/config.sub ../../build-aux/depcomp \
../../build-aux/install-sh ../../build-aux/ltmain.sh \
- ../../build-aux/missing ../../build-aux/texinfo.tex \
- ../../build-aux/ylwrap COPYING COPYING.LESSER ChangeLog \
- INSTALL
+ ../../build-aux/missing ../../build-aux/mkinstalldirs \
+ ../../build-aux/texinfo.tex ../../build-aux/ylwrap COPYING \
+ COPYING.LESSER ChangeLog INSTALL
ACLOCAL_M4 = $(top_srcdir)/aclocal.m4
am__aclocal_m4_deps = $(top_srcdir)/m4/makeinfo.m4 \
$(top_srcdir)/../../m4/kpse-common.m4 \
@@ -73,7 +74,7 @@ am__configure_deps = $(am__aclocal_m4_deps) $(CONFIGURE_DEPENDENCIES) \
$(ACLOCAL_M4)
am__CONFIG_DISTCLEAN_FILES = config.status config.cache config.log \
configure.lineno config.status.lineno
-mkinstalldirs = $(install_sh) -d
+mkinstalldirs = $(SHELL) $(top_srcdir)/../../build-aux/mkinstalldirs
CONFIG_HEADER = config.h
CONFIG_CLEAN_FILES =
am__installdirs = "$(DESTDIR)$(bindir)" "$(DESTDIR)$(infodir)" \
diff --git a/Build/source/texk/dvipos/Makefile.in b/Build/source/texk/dvipos/Makefile.in
index 5c9de97d6eb..7b21a9ccf1d 100644
--- a/Build/source/texk/dvipos/Makefile.in
+++ b/Build/source/texk/dvipos/Makefile.in
@@ -40,13 +40,14 @@ DIST_COMMON = $(am__configure_deps) $(dist_man1_MANS) \
$(srcdir)/../../build-aux/depcomp \
$(srcdir)/../../build-aux/install-sh \
$(srcdir)/../../build-aux/ltmain.sh \
- $(srcdir)/../../build-aux/missing $(srcdir)/Makefile.am \
+ $(srcdir)/../../build-aux/missing \
+ $(srcdir)/../../build-aux/mkinstalldirs $(srcdir)/Makefile.am \
$(srcdir)/Makefile.in $(srcdir)/c-auto.in \
$(top_srcdir)/configure ../../build-aux/config.guess \
../../build-aux/config.sub ../../build-aux/depcomp \
../../build-aux/install-sh ../../build-aux/ltmain.sh \
- ../../build-aux/missing ../../build-aux/texinfo.tex \
- ../../build-aux/ylwrap ChangeLog
+ ../../build-aux/missing ../../build-aux/mkinstalldirs \
+ ../../build-aux/texinfo.tex ../../build-aux/ylwrap ChangeLog
ACLOCAL_M4 = $(top_srcdir)/aclocal.m4
am__aclocal_m4_deps = $(top_srcdir)/../../m4/kpse-common.m4 \
$(top_srcdir)/../../m4/kpse-kpathsea-flags.m4 \
@@ -60,7 +61,7 @@ am__configure_deps = $(am__aclocal_m4_deps) $(CONFIGURE_DEPENDENCIES) \
$(ACLOCAL_M4)
am__CONFIG_DISTCLEAN_FILES = config.status config.cache config.log \
configure.lineno config.status.lineno
-mkinstalldirs = $(install_sh) -d
+mkinstalldirs = $(SHELL) $(top_srcdir)/../../build-aux/mkinstalldirs
CONFIG_HEADER = c-auto.h
CONFIG_CLEAN_FILES =
am__installdirs = "$(DESTDIR)$(bindir)" "$(DESTDIR)$(man1dir)"
diff --git a/Build/source/texk/dvipsk/Makefile.in b/Build/source/texk/dvipsk/Makefile.in
index 433bc53185f..de51ec02b78 100644
--- a/Build/source/texk/dvipsk/Makefile.in
+++ b/Build/source/texk/dvipsk/Makefile.in
@@ -42,13 +42,15 @@ DIST_COMMON = README $(am__configure_deps) $(dist_man1_MANS) \
$(srcdir)/../../build-aux/install-sh \
$(srcdir)/../../build-aux/ltmain.sh \
$(srcdir)/../../build-aux/missing \
+ $(srcdir)/../../build-aux/mkinstalldirs \
$(srcdir)/../../build-aux/texinfo.tex $(srcdir)/Makefile.am \
$(srcdir)/Makefile.in $(srcdir)/c-auto.in \
$(top_srcdir)/configure ../../build-aux/config.guess \
../../build-aux/config.sub ../../build-aux/depcomp \
../../build-aux/install-sh ../../build-aux/ltmain.sh \
- ../../build-aux/missing ../../build-aux/texinfo.tex \
- ../../build-aux/ylwrap AUTHORS ChangeLog INSTALL
+ ../../build-aux/missing ../../build-aux/mkinstalldirs \
+ ../../build-aux/texinfo.tex ../../build-aux/ylwrap AUTHORS \
+ ChangeLog INSTALL
ACLOCAL_M4 = $(top_srcdir)/aclocal.m4
am__aclocal_m4_deps = $(top_srcdir)/../../m4/kpse-common.m4 \
$(top_srcdir)/../../m4/kpse-kpathsea-flags.m4 \
@@ -62,7 +64,7 @@ am__configure_deps = $(am__aclocal_m4_deps) $(CONFIGURE_DEPENDENCIES) \
$(ACLOCAL_M4)
am__CONFIG_DISTCLEAN_FILES = config.status config.cache config.log \
configure.lineno config.status.lineno
-mkinstalldirs = $(install_sh) -d
+mkinstalldirs = $(SHELL) $(top_srcdir)/../../build-aux/mkinstalldirs
CONFIG_HEADER = c-auto.h
CONFIG_CLEAN_FILES =
am__installdirs = "$(DESTDIR)$(bindir)" "$(DESTDIR)$(infodir)" \
diff --git a/Build/source/texk/dvipsk/ac/withenable.ac b/Build/source/texk/dvipsk/ac/withenable.ac
index 836ab8fa68c..66838935c39 100644
--- a/Build/source/texk/dvipsk/ac/withenable.ac
+++ b/Build/source/texk/dvipsk/ac/withenable.ac
@@ -3,5 +3,7 @@ dnl
dnl Copyright (C) 2009 Peter Breitenlohner <tex-live@tug.org>
dnl You may freely use, modify and/or distribute this file.
dnl
+dnl extra_dirs = texk/dvipsk/squeeze
+dnl
## configure options and TL libraries required for dvipsk
KPSE_ENABLE_PROG([dvipsk], [kpathsea])
diff --git a/Build/source/texk/dvipsk/squeeze/Makefile.in b/Build/source/texk/dvipsk/squeeze/Makefile.in
index c6a79ae39d8..32ed21e39dd 100644
--- a/Build/source/texk/dvipsk/squeeze/Makefile.in
+++ b/Build/source/texk/dvipsk/squeeze/Makefile.in
@@ -36,11 +36,13 @@ subdir = .
DIST_COMMON = $(am__configure_deps) \
$(srcdir)/../../../build-aux/depcomp \
$(srcdir)/../../../build-aux/install-sh \
- $(srcdir)/../../../build-aux/missing $(srcdir)/Makefile.am \
- $(srcdir)/Makefile.in $(top_srcdir)/configure \
- ../../../build-aux/config.guess ../../../build-aux/config.sub \
- ../../../build-aux/depcomp ../../../build-aux/install-sh \
- ../../../build-aux/ltmain.sh ../../../build-aux/missing \
+ $(srcdir)/../../../build-aux/missing \
+ $(srcdir)/../../../build-aux/mkinstalldirs \
+ $(srcdir)/Makefile.am $(srcdir)/Makefile.in \
+ $(top_srcdir)/configure ../../../build-aux/config.guess \
+ ../../../build-aux/config.sub ../../../build-aux/depcomp \
+ ../../../build-aux/install-sh ../../../build-aux/ltmain.sh \
+ ../../../build-aux/missing ../../../build-aux/mkinstalldirs \
../../../build-aux/texinfo.tex ../../../build-aux/ylwrap
ACLOCAL_M4 = $(top_srcdir)/aclocal.m4
am__aclocal_m4_deps = $(top_srcdir)/configure.ac
@@ -48,7 +50,8 @@ am__configure_deps = $(am__aclocal_m4_deps) $(CONFIGURE_DEPENDENCIES) \
$(ACLOCAL_M4)
am__CONFIG_DISTCLEAN_FILES = config.status config.cache config.log \
configure.lineno config.status.lineno
-mkinstalldirs = $(install_sh) -d
+mkinstalldirs = $(SHELL) \
+ $(top_srcdir)/../../../build-aux/mkinstalldirs
CONFIG_CLEAN_FILES =
PROGRAMS = $(noinst_PROGRAMS)
squeeze_SOURCES = squeeze.c
diff --git a/Build/source/texk/gsftopk/Makefile.in b/Build/source/texk/gsftopk/Makefile.in
index 4ab884e0b97..0087e27d985 100644
--- a/Build/source/texk/gsftopk/Makefile.in
+++ b/Build/source/texk/gsftopk/Makefile.in
@@ -41,13 +41,15 @@ DIST_COMMON = $(am__configure_deps) $(dist_gsftopkpsheader_DATA) \
$(srcdir)/../../build-aux/depcomp \
$(srcdir)/../../build-aux/install-sh \
$(srcdir)/../../build-aux/ltmain.sh \
- $(srcdir)/../../build-aux/missing $(srcdir)/Makefile.am \
+ $(srcdir)/../../build-aux/missing \
+ $(srcdir)/../../build-aux/mkinstalldirs $(srcdir)/Makefile.am \
$(srcdir)/Makefile.in $(srcdir)/c-auto.in \
$(top_srcdir)/configure ../../build-aux/config.guess \
../../build-aux/config.sub ../../build-aux/depcomp \
../../build-aux/install-sh ../../build-aux/ltmain.sh \
- ../../build-aux/missing ../../build-aux/texinfo.tex \
- ../../build-aux/ylwrap ChangeLog INSTALL
+ ../../build-aux/missing ../../build-aux/mkinstalldirs \
+ ../../build-aux/texinfo.tex ../../build-aux/ylwrap ChangeLog \
+ INSTALL
ACLOCAL_M4 = $(top_srcdir)/aclocal.m4
am__aclocal_m4_deps = $(top_srcdir)/../../m4/kpse-common.m4 \
$(top_srcdir)/../../m4/kpse-kpathsea-flags.m4 \
@@ -61,7 +63,7 @@ am__configure_deps = $(am__aclocal_m4_deps) $(CONFIGURE_DEPENDENCIES) \
$(ACLOCAL_M4)
am__CONFIG_DISTCLEAN_FILES = config.status config.cache config.log \
configure.lineno config.status.lineno
-mkinstalldirs = $(install_sh) -d
+mkinstalldirs = $(SHELL) $(top_srcdir)/../../build-aux/mkinstalldirs
CONFIG_HEADER = c-auto.h
CONFIG_CLEAN_FILES =
am__installdirs = "$(DESTDIR)$(bindir)" "$(DESTDIR)$(man1dir)" \
diff --git a/Build/source/texk/kpathsea/Makefile.in b/Build/source/texk/kpathsea/Makefile.in
index 17e6a74c726..04d66003485 100644
--- a/Build/source/texk/kpathsea/Makefile.in
+++ b/Build/source/texk/kpathsea/Makefile.in
@@ -47,14 +47,15 @@ DIST_COMMON = README $(am__configure_deps) $(dist_noinst_DATA) \
$(srcdir)/../../build-aux/depcomp \
$(srcdir)/../../build-aux/install-sh \
$(srcdir)/../../build-aux/ltmain.sh \
- $(srcdir)/../../build-aux/missing $(srcdir)/Makefile.am \
+ $(srcdir)/../../build-aux/missing \
+ $(srcdir)/../../build-aux/mkinstalldirs $(srcdir)/Makefile.am \
$(srcdir)/Makefile.in $(srcdir)/c-auto.in \
$(top_srcdir)/configure ../../build-aux/config.guess \
../../build-aux/config.sub ../../build-aux/depcomp \
../../build-aux/install-sh ../../build-aux/ltmain.sh \
- ../../build-aux/missing ../../build-aux/texinfo.tex \
- ../../build-aux/ylwrap AUTHORS ChangeLog INSTALL NEWS putenv.c \
- strcasecmp.c strstr.c strtol.c
+ ../../build-aux/missing ../../build-aux/mkinstalldirs \
+ ../../build-aux/texinfo.tex ../../build-aux/ylwrap AUTHORS \
+ ChangeLog INSTALL NEWS putenv.c strcasecmp.c strstr.c strtol.c
ACLOCAL_M4 = $(top_srcdir)/aclocal.m4
am__aclocal_m4_deps = $(top_srcdir)/../../m4/kpse-common.m4 \
$(top_srcdir)/../../m4/kpse-web2c.m4 \
@@ -68,7 +69,7 @@ am__configure_deps = $(am__aclocal_m4_deps) $(CONFIGURE_DEPENDENCIES) \
$(ACLOCAL_M4)
am__CONFIG_DISTCLEAN_FILES = config.status config.cache config.log \
configure.lineno config.status.lineno
-mkinstalldirs = $(install_sh) -d
+mkinstalldirs = $(SHELL) $(top_srcdir)/../../build-aux/mkinstalldirs
CONFIG_HEADER = c-auto.h
CONFIG_CLEAN_FILES =
am__vpath_adj_setup = srcdirstrip=`echo "$(srcdir)" | sed 's|.|.|g'`;
diff --git a/Build/source/texk/kpathsea/doc/Makefile.in b/Build/source/texk/kpathsea/doc/Makefile.in
index 2aa2e85e4f6..db422c3bc34 100644
--- a/Build/source/texk/kpathsea/doc/Makefile.in
+++ b/Build/source/texk/kpathsea/doc/Makefile.in
@@ -45,7 +45,7 @@ am__aclocal_m4_deps = $(top_srcdir)/../../m4/kpse-common.m4 \
$(top_srcdir)/ac/web2c.ac $(top_srcdir)/configure.ac
am__configure_deps = $(am__aclocal_m4_deps) $(CONFIGURE_DEPENDENCIES) \
$(ACLOCAL_M4)
-mkinstalldirs = $(install_sh) -d
+mkinstalldirs = $(SHELL) $(top_srcdir)/../../build-aux/mkinstalldirs
CONFIG_HEADER = $(top_builddir)/c-auto.h
CONFIG_CLEAN_FILES =
SOURCES =
diff --git a/Build/source/texk/kpathsea/man/Makefile.in b/Build/source/texk/kpathsea/man/Makefile.in
index 82c1278202f..9ba28fc5533 100644
--- a/Build/source/texk/kpathsea/man/Makefile.in
+++ b/Build/source/texk/kpathsea/man/Makefile.in
@@ -45,7 +45,7 @@ am__aclocal_m4_deps = $(top_srcdir)/../../m4/kpse-common.m4 \
$(top_srcdir)/ac/web2c.ac $(top_srcdir)/configure.ac
am__configure_deps = $(am__aclocal_m4_deps) $(CONFIGURE_DEPENDENCIES) \
$(ACLOCAL_M4)
-mkinstalldirs = $(install_sh) -d
+mkinstalldirs = $(SHELL) $(top_srcdir)/../../build-aux/mkinstalldirs
CONFIG_HEADER = $(top_builddir)/c-auto.h
CONFIG_CLEAN_FILES =
SOURCES =
diff --git a/Build/source/texk/lacheck/Makefile.in b/Build/source/texk/lacheck/Makefile.in
index 6688be9575f..741ea55b226 100644
--- a/Build/source/texk/lacheck/Makefile.in
+++ b/Build/source/texk/lacheck/Makefile.in
@@ -41,13 +41,15 @@ DIST_COMMON = $(am__configure_deps) $(dist_check_SCRIPTS) \
$(srcdir)/../../build-aux/install-sh \
$(srcdir)/../../build-aux/ltmain.sh \
$(srcdir)/../../build-aux/missing \
+ $(srcdir)/../../build-aux/mkinstalldirs \
$(srcdir)/../../build-aux/ylwrap $(srcdir)/Makefile.am \
$(srcdir)/Makefile.in $(srcdir)/config.h.in \
$(top_srcdir)/configure ../../build-aux/config.guess \
../../build-aux/config.sub ../../build-aux/depcomp \
../../build-aux/install-sh ../../build-aux/ltmain.sh \
- ../../build-aux/missing ../../build-aux/texinfo.tex \
- ../../build-aux/ylwrap ChangeLog lacheck.c
+ ../../build-aux/missing ../../build-aux/mkinstalldirs \
+ ../../build-aux/texinfo.tex ../../build-aux/ylwrap ChangeLog \
+ lacheck.c
ACLOCAL_M4 = $(top_srcdir)/aclocal.m4
am__aclocal_m4_deps = $(top_srcdir)/../../m4/kpse-common.m4 \
$(top_srcdir)/../../m4/kpse-lex.m4 \
@@ -61,7 +63,7 @@ am__configure_deps = $(am__aclocal_m4_deps) $(CONFIGURE_DEPENDENCIES) \
$(ACLOCAL_M4)
am__CONFIG_DISTCLEAN_FILES = config.status config.cache config.log \
configure.lineno config.status.lineno
-mkinstalldirs = $(install_sh) -d
+mkinstalldirs = $(SHELL) $(top_srcdir)/../../build-aux/mkinstalldirs
CONFIG_HEADER = config.h
CONFIG_CLEAN_FILES =
am__installdirs = "$(DESTDIR)$(bindir)" "$(DESTDIR)$(man1dir)"
diff --git a/Build/source/texk/lcdf-typetools/Makefile.in b/Build/source/texk/lcdf-typetools/Makefile.in
index d06999d4119..0e55582d716 100644
--- a/Build/source/texk/lcdf-typetools/Makefile.in
+++ b/Build/source/texk/lcdf-typetools/Makefile.in
@@ -38,13 +38,15 @@ DIST_COMMON = README $(am__configure_deps) \
$(srcdir)/../../build-aux/config.sub \
$(srcdir)/../../build-aux/install-sh \
$(srcdir)/../../build-aux/ltmain.sh \
- $(srcdir)/../../build-aux/missing $(srcdir)/Makefile.am \
+ $(srcdir)/../../build-aux/missing \
+ $(srcdir)/../../build-aux/mkinstalldirs $(srcdir)/Makefile.am \
$(srcdir)/Makefile.in $(srcdir)/README $(srcdir)/config.h.in \
$(top_srcdir)/configure ../../build-aux/config.guess \
../../build-aux/config.sub ../../build-aux/depcomp \
../../build-aux/install-sh ../../build-aux/ltmain.sh \
- ../../build-aux/missing ../../build-aux/texinfo.tex \
- ../../build-aux/ylwrap COPYING ChangeLog INSTALL NEWS
+ ../../build-aux/missing ../../build-aux/mkinstalldirs \
+ ../../build-aux/texinfo.tex ../../build-aux/ylwrap COPYING \
+ ChangeLog INSTALL NEWS
ACLOCAL_M4 = $(top_srcdir)/aclocal.m4
am__aclocal_m4_deps = $(top_srcdir)/m4/ac_cxx_template_objs.m4 \
$(top_srcdir)/../../m4/kpse-common.m4 \
@@ -60,7 +62,7 @@ am__configure_deps = $(am__aclocal_m4_deps) $(CONFIGURE_DEPENDENCIES) \
$(ACLOCAL_M4)
am__CONFIG_DISTCLEAN_FILES = config.status config.cache config.log \
configure.lineno config.status.lineno
-mkinstalldirs = $(install_sh) -d
+mkinstalldirs = $(SHELL) $(top_srcdir)/../../build-aux/mkinstalldirs
CONFIG_HEADER = config.h
CONFIG_CLEAN_FILES = CXXLD.sh
SOURCES =
diff --git a/Build/source/texk/lcdf-typetools/cfftot1/Makefile.in b/Build/source/texk/lcdf-typetools/cfftot1/Makefile.in
index 884469acc82..24e2d96d476 100644
--- a/Build/source/texk/lcdf-typetools/cfftot1/Makefile.in
+++ b/Build/source/texk/lcdf-typetools/cfftot1/Makefile.in
@@ -48,7 +48,7 @@ am__aclocal_m4_deps = $(top_srcdir)/m4/ac_cxx_template_objs.m4 \
$(top_srcdir)/ac/lcdf-typetools.ac $(top_srcdir)/configure.ac
am__configure_deps = $(am__aclocal_m4_deps) $(CONFIGURE_DEPENDENCIES) \
$(ACLOCAL_M4)
-mkinstalldirs = $(install_sh) -d
+mkinstalldirs = $(SHELL) $(top_srcdir)/../../build-aux/mkinstalldirs
CONFIG_HEADER = $(top_builddir)/config.h
CONFIG_CLEAN_FILES =
am__installdirs = "$(DESTDIR)$(bindir)" "$(DESTDIR)$(man1dir)"
diff --git a/Build/source/texk/lcdf-typetools/libefont/Makefile.in b/Build/source/texk/lcdf-typetools/libefont/Makefile.in
index 011eaa36368..42aeb3da5d3 100644
--- a/Build/source/texk/lcdf-typetools/libefont/Makefile.in
+++ b/Build/source/texk/lcdf-typetools/libefont/Makefile.in
@@ -47,7 +47,7 @@ am__aclocal_m4_deps = $(top_srcdir)/m4/ac_cxx_template_objs.m4 \
$(top_srcdir)/ac/lcdf-typetools.ac $(top_srcdir)/configure.ac
am__configure_deps = $(am__aclocal_m4_deps) $(CONFIGURE_DEPENDENCIES) \
$(ACLOCAL_M4)
-mkinstalldirs = $(install_sh) -d
+mkinstalldirs = $(SHELL) $(top_srcdir)/../../build-aux/mkinstalldirs
CONFIG_HEADER = $(top_builddir)/config.h
CONFIG_CLEAN_FILES =
LIBRARIES = $(noinst_LIBRARIES)
diff --git a/Build/source/texk/lcdf-typetools/liblcdf/Makefile.in b/Build/source/texk/lcdf-typetools/liblcdf/Makefile.in
index ac1e4dc8e55..a837b7da47a 100644
--- a/Build/source/texk/lcdf-typetools/liblcdf/Makefile.in
+++ b/Build/source/texk/lcdf-typetools/liblcdf/Makefile.in
@@ -47,7 +47,7 @@ am__aclocal_m4_deps = $(top_srcdir)/m4/ac_cxx_template_objs.m4 \
$(top_srcdir)/ac/lcdf-typetools.ac $(top_srcdir)/configure.ac
am__configure_deps = $(am__aclocal_m4_deps) $(CONFIGURE_DEPENDENCIES) \
$(ACLOCAL_M4)
-mkinstalldirs = $(install_sh) -d
+mkinstalldirs = $(SHELL) $(top_srcdir)/../../build-aux/mkinstalldirs
CONFIG_HEADER = $(top_builddir)/config.h
CONFIG_CLEAN_FILES =
LIBRARIES = $(noinst_LIBRARIES)
diff --git a/Build/source/texk/lcdf-typetools/mmafm/Makefile.in b/Build/source/texk/lcdf-typetools/mmafm/Makefile.in
index b880ec5d105..80a02966f58 100644
--- a/Build/source/texk/lcdf-typetools/mmafm/Makefile.in
+++ b/Build/source/texk/lcdf-typetools/mmafm/Makefile.in
@@ -48,7 +48,7 @@ am__aclocal_m4_deps = $(top_srcdir)/m4/ac_cxx_template_objs.m4 \
$(top_srcdir)/ac/lcdf-typetools.ac $(top_srcdir)/configure.ac
am__configure_deps = $(am__aclocal_m4_deps) $(CONFIGURE_DEPENDENCIES) \
$(ACLOCAL_M4)
-mkinstalldirs = $(install_sh) -d
+mkinstalldirs = $(SHELL) $(top_srcdir)/../../build-aux/mkinstalldirs
CONFIG_HEADER = $(top_builddir)/config.h
CONFIG_CLEAN_FILES =
am__installdirs = "$(DESTDIR)$(bindir)" "$(DESTDIR)$(man1dir)"
diff --git a/Build/source/texk/lcdf-typetools/mmpfb/Makefile.in b/Build/source/texk/lcdf-typetools/mmpfb/Makefile.in
index 75f627113b5..13c3f5c94da 100644
--- a/Build/source/texk/lcdf-typetools/mmpfb/Makefile.in
+++ b/Build/source/texk/lcdf-typetools/mmpfb/Makefile.in
@@ -48,7 +48,7 @@ am__aclocal_m4_deps = $(top_srcdir)/m4/ac_cxx_template_objs.m4 \
$(top_srcdir)/ac/lcdf-typetools.ac $(top_srcdir)/configure.ac
am__configure_deps = $(am__aclocal_m4_deps) $(CONFIGURE_DEPENDENCIES) \
$(ACLOCAL_M4)
-mkinstalldirs = $(install_sh) -d
+mkinstalldirs = $(SHELL) $(top_srcdir)/../../build-aux/mkinstalldirs
CONFIG_HEADER = $(top_builddir)/config.h
CONFIG_CLEAN_FILES =
am__installdirs = "$(DESTDIR)$(bindir)" "$(DESTDIR)$(man1dir)"
diff --git a/Build/source/texk/lcdf-typetools/otfinfo/Makefile.in b/Build/source/texk/lcdf-typetools/otfinfo/Makefile.in
index f8bf60bb995..fde74b21665 100644
--- a/Build/source/texk/lcdf-typetools/otfinfo/Makefile.in
+++ b/Build/source/texk/lcdf-typetools/otfinfo/Makefile.in
@@ -48,7 +48,7 @@ am__aclocal_m4_deps = $(top_srcdir)/m4/ac_cxx_template_objs.m4 \
$(top_srcdir)/ac/lcdf-typetools.ac $(top_srcdir)/configure.ac
am__configure_deps = $(am__aclocal_m4_deps) $(CONFIGURE_DEPENDENCIES) \
$(ACLOCAL_M4)
-mkinstalldirs = $(install_sh) -d
+mkinstalldirs = $(SHELL) $(top_srcdir)/../../build-aux/mkinstalldirs
CONFIG_HEADER = $(top_builddir)/config.h
CONFIG_CLEAN_FILES =
am__installdirs = "$(DESTDIR)$(bindir)" "$(DESTDIR)$(man1dir)"
diff --git a/Build/source/texk/lcdf-typetools/otftotfm/Makefile.in b/Build/source/texk/lcdf-typetools/otftotfm/Makefile.in
index d8a50ff9409..c4650f2d098 100644
--- a/Build/source/texk/lcdf-typetools/otftotfm/Makefile.in
+++ b/Build/source/texk/lcdf-typetools/otftotfm/Makefile.in
@@ -52,7 +52,7 @@ am__aclocal_m4_deps = $(top_srcdir)/m4/ac_cxx_template_objs.m4 \
$(top_srcdir)/ac/lcdf-typetools.ac $(top_srcdir)/configure.ac
am__configure_deps = $(am__aclocal_m4_deps) $(CONFIGURE_DEPENDENCIES) \
$(ACLOCAL_M4)
-mkinstalldirs = $(install_sh) -d
+mkinstalldirs = $(SHELL) $(top_srcdir)/../../build-aux/mkinstalldirs
CONFIG_HEADER = $(top_builddir)/config.h
CONFIG_CLEAN_FILES =
am__installdirs = "$(DESTDIR)$(bindir)" "$(DESTDIR)$(man1dir)"
diff --git a/Build/source/texk/lcdf-typetools/t1dotlessj/Makefile.in b/Build/source/texk/lcdf-typetools/t1dotlessj/Makefile.in
index e186dc480c1..01ec22f9963 100644
--- a/Build/source/texk/lcdf-typetools/t1dotlessj/Makefile.in
+++ b/Build/source/texk/lcdf-typetools/t1dotlessj/Makefile.in
@@ -48,7 +48,7 @@ am__aclocal_m4_deps = $(top_srcdir)/m4/ac_cxx_template_objs.m4 \
$(top_srcdir)/ac/lcdf-typetools.ac $(top_srcdir)/configure.ac
am__configure_deps = $(am__aclocal_m4_deps) $(CONFIGURE_DEPENDENCIES) \
$(ACLOCAL_M4)
-mkinstalldirs = $(install_sh) -d
+mkinstalldirs = $(SHELL) $(top_srcdir)/../../build-aux/mkinstalldirs
CONFIG_HEADER = $(top_builddir)/config.h
CONFIG_CLEAN_FILES =
am__installdirs = "$(DESTDIR)$(bindir)" "$(DESTDIR)$(man1dir)"
diff --git a/Build/source/texk/lcdf-typetools/t1lint/Makefile.in b/Build/source/texk/lcdf-typetools/t1lint/Makefile.in
index cfd04901fab..d304554da2f 100644
--- a/Build/source/texk/lcdf-typetools/t1lint/Makefile.in
+++ b/Build/source/texk/lcdf-typetools/t1lint/Makefile.in
@@ -48,7 +48,7 @@ am__aclocal_m4_deps = $(top_srcdir)/m4/ac_cxx_template_objs.m4 \
$(top_srcdir)/ac/lcdf-typetools.ac $(top_srcdir)/configure.ac
am__configure_deps = $(am__aclocal_m4_deps) $(CONFIGURE_DEPENDENCIES) \
$(ACLOCAL_M4)
-mkinstalldirs = $(install_sh) -d
+mkinstalldirs = $(SHELL) $(top_srcdir)/../../build-aux/mkinstalldirs
CONFIG_HEADER = $(top_builddir)/config.h
CONFIG_CLEAN_FILES =
am__installdirs = "$(DESTDIR)$(bindir)" "$(DESTDIR)$(man1dir)"
diff --git a/Build/source/texk/lcdf-typetools/t1rawafm/Makefile.in b/Build/source/texk/lcdf-typetools/t1rawafm/Makefile.in
index 4c6174cd123..17f4df247f4 100644
--- a/Build/source/texk/lcdf-typetools/t1rawafm/Makefile.in
+++ b/Build/source/texk/lcdf-typetools/t1rawafm/Makefile.in
@@ -48,7 +48,7 @@ am__aclocal_m4_deps = $(top_srcdir)/m4/ac_cxx_template_objs.m4 \
$(top_srcdir)/ac/lcdf-typetools.ac $(top_srcdir)/configure.ac
am__configure_deps = $(am__aclocal_m4_deps) $(CONFIGURE_DEPENDENCIES) \
$(ACLOCAL_M4)
-mkinstalldirs = $(install_sh) -d
+mkinstalldirs = $(SHELL) $(top_srcdir)/../../build-aux/mkinstalldirs
CONFIG_HEADER = $(top_builddir)/config.h
CONFIG_CLEAN_FILES =
am__installdirs = "$(DESTDIR)$(bindir)" "$(DESTDIR)$(man1dir)"
diff --git a/Build/source/texk/lcdf-typetools/t1reencode/Makefile.in b/Build/source/texk/lcdf-typetools/t1reencode/Makefile.in
index 86bb78ad739..1c92b1b059c 100644
--- a/Build/source/texk/lcdf-typetools/t1reencode/Makefile.in
+++ b/Build/source/texk/lcdf-typetools/t1reencode/Makefile.in
@@ -48,7 +48,7 @@ am__aclocal_m4_deps = $(top_srcdir)/m4/ac_cxx_template_objs.m4 \
$(top_srcdir)/ac/lcdf-typetools.ac $(top_srcdir)/configure.ac
am__configure_deps = $(am__aclocal_m4_deps) $(CONFIGURE_DEPENDENCIES) \
$(ACLOCAL_M4)
-mkinstalldirs = $(install_sh) -d
+mkinstalldirs = $(SHELL) $(top_srcdir)/../../build-aux/mkinstalldirs
CONFIG_HEADER = $(top_builddir)/config.h
CONFIG_CLEAN_FILES =
am__installdirs = "$(DESTDIR)$(bindir)" "$(DESTDIR)$(man1dir)"
diff --git a/Build/source/texk/lcdf-typetools/t1testpage/Makefile.in b/Build/source/texk/lcdf-typetools/t1testpage/Makefile.in
index 5740e64a3ee..65b35fafc39 100644
--- a/Build/source/texk/lcdf-typetools/t1testpage/Makefile.in
+++ b/Build/source/texk/lcdf-typetools/t1testpage/Makefile.in
@@ -48,7 +48,7 @@ am__aclocal_m4_deps = $(top_srcdir)/m4/ac_cxx_template_objs.m4 \
$(top_srcdir)/ac/lcdf-typetools.ac $(top_srcdir)/configure.ac
am__configure_deps = $(am__aclocal_m4_deps) $(CONFIGURE_DEPENDENCIES) \
$(ACLOCAL_M4)
-mkinstalldirs = $(install_sh) -d
+mkinstalldirs = $(SHELL) $(top_srcdir)/../../build-aux/mkinstalldirs
CONFIG_HEADER = $(top_builddir)/config.h
CONFIG_CLEAN_FILES =
am__installdirs = "$(DESTDIR)$(bindir)" "$(DESTDIR)$(man1dir)"
diff --git a/Build/source/texk/lcdf-typetools/ttftotype42/Makefile.in b/Build/source/texk/lcdf-typetools/ttftotype42/Makefile.in
index b620b85a4b1..3eff2cb36f1 100644
--- a/Build/source/texk/lcdf-typetools/ttftotype42/Makefile.in
+++ b/Build/source/texk/lcdf-typetools/ttftotype42/Makefile.in
@@ -48,7 +48,7 @@ am__aclocal_m4_deps = $(top_srcdir)/m4/ac_cxx_template_objs.m4 \
$(top_srcdir)/ac/lcdf-typetools.ac $(top_srcdir)/configure.ac
am__configure_deps = $(am__aclocal_m4_deps) $(CONFIGURE_DEPENDENCIES) \
$(ACLOCAL_M4)
-mkinstalldirs = $(install_sh) -d
+mkinstalldirs = $(SHELL) $(top_srcdir)/../../build-aux/mkinstalldirs
CONFIG_HEADER = $(top_builddir)/config.h
CONFIG_CLEAN_FILES =
am__installdirs = "$(DESTDIR)$(bindir)" "$(DESTDIR)$(man1dir)"
diff --git a/Build/source/texk/makeindexk/Makefile.in b/Build/source/texk/makeindexk/Makefile.in
index ec258fc48a7..a296e90330d 100644
--- a/Build/source/texk/makeindexk/Makefile.in
+++ b/Build/source/texk/makeindexk/Makefile.in
@@ -41,13 +41,15 @@ DIST_COMMON = README $(am__configure_deps) $(dist_bin_SCRIPTS) \
$(srcdir)/../../build-aux/depcomp \
$(srcdir)/../../build-aux/install-sh \
$(srcdir)/../../build-aux/ltmain.sh \
- $(srcdir)/../../build-aux/missing $(srcdir)/Makefile.am \
+ $(srcdir)/../../build-aux/missing \
+ $(srcdir)/../../build-aux/mkinstalldirs $(srcdir)/Makefile.am \
$(srcdir)/Makefile.in $(srcdir)/c-auto.in \
$(top_srcdir)/configure ../../build-aux/config.guess \
../../build-aux/config.sub ../../build-aux/depcomp \
../../build-aux/install-sh ../../build-aux/ltmain.sh \
- ../../build-aux/missing ../../build-aux/texinfo.tex \
- ../../build-aux/ylwrap COPYING ChangeLog INSTALL NEWS
+ ../../build-aux/missing ../../build-aux/mkinstalldirs \
+ ../../build-aux/texinfo.tex ../../build-aux/ylwrap COPYING \
+ ChangeLog INSTALL NEWS
ACLOCAL_M4 = $(top_srcdir)/aclocal.m4
am__aclocal_m4_deps = $(top_srcdir)/../../m4/kpse-common.m4 \
$(top_srcdir)/../../m4/kpse-kpathsea-flags.m4 \
@@ -61,7 +63,7 @@ am__configure_deps = $(am__aclocal_m4_deps) $(CONFIGURE_DEPENDENCIES) \
$(ACLOCAL_M4)
am__CONFIG_DISTCLEAN_FILES = config.status config.cache config.log \
configure.lineno config.status.lineno
-mkinstalldirs = $(install_sh) -d
+mkinstalldirs = $(SHELL) $(top_srcdir)/../../build-aux/mkinstalldirs
CONFIG_HEADER = c-auto.h
CONFIG_CLEAN_FILES =
am__installdirs = "$(DESTDIR)$(bindir)" "$(DESTDIR)$(bindir)" \
diff --git a/Build/source/texk/musixflx/Makefile.in b/Build/source/texk/musixflx/Makefile.in
index 60010024425..6a0a0315096 100644
--- a/Build/source/texk/musixflx/Makefile.in
+++ b/Build/source/texk/musixflx/Makefile.in
@@ -34,20 +34,21 @@ bin_PROGRAMS = musixflx$(EXEEXT)
subdir = .
DIST_COMMON = $(am__configure_deps) $(srcdir)/../../build-aux/depcomp \
$(srcdir)/../../build-aux/install-sh \
- $(srcdir)/../../build-aux/missing $(srcdir)/Makefile.am \
+ $(srcdir)/../../build-aux/missing \
+ $(srcdir)/../../build-aux/mkinstalldirs $(srcdir)/Makefile.am \
$(srcdir)/Makefile.in $(srcdir)/config.h.in \
$(top_srcdir)/configure ../../build-aux/config.guess \
../../build-aux/config.sub ../../build-aux/depcomp \
../../build-aux/install-sh ../../build-aux/ltmain.sh \
- ../../build-aux/missing ../../build-aux/texinfo.tex \
- ../../build-aux/ylwrap ChangeLog
+ ../../build-aux/missing ../../build-aux/mkinstalldirs \
+ ../../build-aux/texinfo.tex ../../build-aux/ylwrap ChangeLog
ACLOCAL_M4 = $(top_srcdir)/aclocal.m4
am__aclocal_m4_deps = $(top_srcdir)/configure.ac
am__configure_deps = $(am__aclocal_m4_deps) $(CONFIGURE_DEPENDENCIES) \
$(ACLOCAL_M4)
am__CONFIG_DISTCLEAN_FILES = config.status config.cache config.log \
configure.lineno config.status.lineno
-mkinstalldirs = $(install_sh) -d
+mkinstalldirs = $(SHELL) $(top_srcdir)/../../build-aux/mkinstalldirs
CONFIG_HEADER = config.h
CONFIG_CLEAN_FILES =
am__installdirs = "$(DESTDIR)$(bindir)"
diff --git a/Build/source/texk/ps2pkm/Makefile.in b/Build/source/texk/ps2pkm/Makefile.in
index c46eedf0cfd..91ff6746a63 100644
--- a/Build/source/texk/ps2pkm/Makefile.in
+++ b/Build/source/texk/ps2pkm/Makefile.in
@@ -41,13 +41,14 @@ DIST_COMMON = README $(am__configure_deps) $(dist_man1_MANS) \
$(srcdir)/../../build-aux/depcomp \
$(srcdir)/../../build-aux/install-sh \
$(srcdir)/../../build-aux/ltmain.sh \
- $(srcdir)/../../build-aux/missing $(srcdir)/Makefile.am \
+ $(srcdir)/../../build-aux/missing \
+ $(srcdir)/../../build-aux/mkinstalldirs $(srcdir)/Makefile.am \
$(srcdir)/Makefile.in $(srcdir)/c-auto.in \
$(top_srcdir)/configure ../../build-aux/config.guess \
../../build-aux/config.sub ../../build-aux/depcomp \
../../build-aux/install-sh ../../build-aux/ltmain.sh \
- ../../build-aux/missing ../../build-aux/texinfo.tex \
- ../../build-aux/ylwrap ChangeLog
+ ../../build-aux/missing ../../build-aux/mkinstalldirs \
+ ../../build-aux/texinfo.tex ../../build-aux/ylwrap ChangeLog
ACLOCAL_M4 = $(top_srcdir)/aclocal.m4
am__aclocal_m4_deps = $(top_srcdir)/../../m4/kpse-common.m4 \
$(top_srcdir)/../../m4/kpse-kpathsea-flags.m4 \
@@ -61,7 +62,7 @@ am__configure_deps = $(am__aclocal_m4_deps) $(CONFIGURE_DEPENDENCIES) \
$(ACLOCAL_M4)
am__CONFIG_DISTCLEAN_FILES = config.status config.cache config.log \
configure.lineno config.status.lineno
-mkinstalldirs = $(install_sh) -d
+mkinstalldirs = $(SHELL) $(top_srcdir)/../../build-aux/mkinstalldirs
CONFIG_HEADER = c-auto.h
CONFIG_CLEAN_FILES =
am__installdirs = "$(DESTDIR)$(bindir)" "$(DESTDIR)$(man1dir)"
diff --git a/Build/source/texk/seetexk/Makefile.in b/Build/source/texk/seetexk/Makefile.in
index e38fe1cc450..2a4e0e0a6ed 100644
--- a/Build/source/texk/seetexk/Makefile.in
+++ b/Build/source/texk/seetexk/Makefile.in
@@ -43,13 +43,14 @@ DIST_COMMON = README $(am__configure_deps) $(dist_man1_MANS) \
$(srcdir)/../../build-aux/depcomp \
$(srcdir)/../../build-aux/install-sh \
$(srcdir)/../../build-aux/ltmain.sh \
- $(srcdir)/../../build-aux/missing $(srcdir)/Makefile.am \
+ $(srcdir)/../../build-aux/missing \
+ $(srcdir)/../../build-aux/mkinstalldirs $(srcdir)/Makefile.am \
$(srcdir)/Makefile.in $(srcdir)/config.h.in \
$(top_srcdir)/configure ../../build-aux/config.guess \
../../build-aux/config.sub ../../build-aux/depcomp \
../../build-aux/install-sh ../../build-aux/ltmain.sh \
- ../../build-aux/missing ../../build-aux/texinfo.tex \
- ../../build-aux/ylwrap ChangeLog
+ ../../build-aux/missing ../../build-aux/mkinstalldirs \
+ ../../build-aux/texinfo.tex ../../build-aux/ylwrap ChangeLog
ACLOCAL_M4 = $(top_srcdir)/aclocal.m4
am__aclocal_m4_deps = $(top_srcdir)/../../m4/kpse-common.m4 \
$(top_srcdir)/../../m4/kpse-kpathsea-flags.m4 \
@@ -63,7 +64,7 @@ am__configure_deps = $(am__aclocal_m4_deps) $(CONFIGURE_DEPENDENCIES) \
$(ACLOCAL_M4)
am__CONFIG_DISTCLEAN_FILES = config.status config.cache config.log \
configure.lineno config.status.lineno
-mkinstalldirs = $(install_sh) -d
+mkinstalldirs = $(SHELL) $(top_srcdir)/../../build-aux/mkinstalldirs
CONFIG_HEADER = config.h
CONFIG_CLEAN_FILES =
LIBRARIES = $(noinst_LIBRARIES)
diff --git a/Build/source/texk/tetex/Makefile.in b/Build/source/texk/tetex/Makefile.in
index 26f99774950..ad217e7c86e 100644
--- a/Build/source/texk/tetex/Makefile.in
+++ b/Build/source/texk/tetex/Makefile.in
@@ -37,19 +37,21 @@ DIST_COMMON = $(am__configure_deps) $(dist_bin_SCRIPTS) \
$(dist_texconfig_DATA) $(dist_texconfig_SCRIPTS) \
$(dist_web2c_DATA) $(nobase_dist_texconf_DATA) \
$(srcdir)/../../build-aux/install-sh \
- $(srcdir)/../../build-aux/missing $(srcdir)/Makefile.am \
+ $(srcdir)/../../build-aux/missing \
+ $(srcdir)/../../build-aux/mkinstalldirs $(srcdir)/Makefile.am \
$(srcdir)/Makefile.in $(top_srcdir)/configure \
../../build-aux/config.guess ../../build-aux/config.sub \
../../build-aux/depcomp ../../build-aux/install-sh \
../../build-aux/ltmain.sh ../../build-aux/missing \
- ../../build-aux/texinfo.tex ../../build-aux/ylwrap ChangeLog
+ ../../build-aux/mkinstalldirs ../../build-aux/texinfo.tex \
+ ../../build-aux/ylwrap ChangeLog
ACLOCAL_M4 = $(top_srcdir)/aclocal.m4
am__aclocal_m4_deps = $(top_srcdir)/configure.ac
am__configure_deps = $(am__aclocal_m4_deps) $(CONFIGURE_DEPENDENCIES) \
$(ACLOCAL_M4)
am__CONFIG_DISTCLEAN_FILES = config.status config.cache config.log \
configure.lineno config.status.lineno
-mkinstalldirs = $(install_sh) -d
+mkinstalldirs = $(SHELL) $(top_srcdir)/../../build-aux/mkinstalldirs
CONFIG_CLEAN_FILES =
am__installdirs = "$(DESTDIR)$(bindir)" "$(DESTDIR)$(texconfigdir)" \
"$(DESTDIR)$(man1dir)" "$(DESTDIR)$(man5dir)" \
diff --git a/Build/source/texk/tex4htk/Makefile.in b/Build/source/texk/tex4htk/Makefile.in
index 781bcee3a54..fc6e85955eb 100644
--- a/Build/source/texk/tex4htk/Makefile.in
+++ b/Build/source/texk/tex4htk/Makefile.in
@@ -41,13 +41,14 @@ DIST_COMMON = $(am__configure_deps) \
$(srcdir)/../../build-aux/depcomp \
$(srcdir)/../../build-aux/install-sh \
$(srcdir)/../../build-aux/ltmain.sh \
- $(srcdir)/../../build-aux/missing $(srcdir)/Makefile.am \
+ $(srcdir)/../../build-aux/missing \
+ $(srcdir)/../../build-aux/mkinstalldirs $(srcdir)/Makefile.am \
$(srcdir)/Makefile.in $(srcdir)/c-auto.in \
$(top_srcdir)/configure ../../build-aux/config.guess \
../../build-aux/config.sub ../../build-aux/depcomp \
../../build-aux/install-sh ../../build-aux/ltmain.sh \
- ../../build-aux/missing ../../build-aux/texinfo.tex \
- ../../build-aux/ylwrap ChangeLog
+ ../../build-aux/missing ../../build-aux/mkinstalldirs \
+ ../../build-aux/texinfo.tex ../../build-aux/ylwrap ChangeLog
ACLOCAL_M4 = $(top_srcdir)/aclocal.m4
am__aclocal_m4_deps = $(top_srcdir)/../../m4/kpse-common.m4 \
$(top_srcdir)/../../m4/kpse-kpathsea-flags.m4 \
@@ -61,7 +62,7 @@ am__configure_deps = $(am__aclocal_m4_deps) $(CONFIGURE_DEPENDENCIES) \
$(ACLOCAL_M4)
am__CONFIG_DISTCLEAN_FILES = config.status config.cache config.log \
configure.lineno config.status.lineno
-mkinstalldirs = $(install_sh) -d
+mkinstalldirs = $(SHELL) $(top_srcdir)/../../build-aux/mkinstalldirs
CONFIG_HEADER = c-auto.h
CONFIG_CLEAN_FILES =
am__installdirs = "$(DESTDIR)$(bindir)" "$(DESTDIR)$(bindir)" \
diff --git a/Build/source/texk/texlive/Makefile.in b/Build/source/texk/texlive/Makefile.in
index d7b27bfd310..9f24b7b1208 100644
--- a/Build/source/texk/texlive/Makefile.in
+++ b/Build/source/texk/texlive/Makefile.in
@@ -1,9 +1,8 @@
-# Makefile.in generated by automake 1.11 from Makefile.am.
+# Makefile.in generated by automake 1.10.2 from Makefile.am.
# @configure_input@
# Copyright (C) 1994, 1995, 1996, 1997, 1998, 1999, 2000, 2001, 2002,
-# 2003, 2004, 2005, 2006, 2007, 2008, 2009 Free Software Foundation,
-# Inc.
+# 2003, 2004, 2005, 2006, 2007, 2008 Free Software Foundation, Inc.
# This Makefile.in is free software; the Free Software Foundation
# gives unlimited permission to copy and/or distribute it,
# with or without modifications, as long as this notice is preserved.
@@ -16,9 +15,8 @@
@SET_MAKE@
VPATH = @srcdir@
pkgdatadir = $(datadir)/@PACKAGE@
-pkgincludedir = $(includedir)/@PACKAGE@
pkglibdir = $(libdir)/@PACKAGE@
-pkglibexecdir = $(libexecdir)/@PACKAGE@
+pkgincludedir = $(includedir)/@PACKAGE@
am__cd = CDPATH="$${ZSH_VERSION+.}$(PATH_SEPARATOR)" && cd
install_sh_DATA = $(install_sh) -c -m 644
install_sh_PROGRAM = $(install_sh) -c
@@ -50,7 +48,6 @@ am__CONFIG_DISTCLEAN_FILES = config.status config.cache config.log \
configure.lineno config.status.lineno
mkinstalldirs = $(SHELL) $(top_srcdir)/../../build-aux/mkinstalldirs
CONFIG_CLEAN_FILES =
-CONFIG_CLEAN_VPATH_FILES =
SOURCES =
DIST_SOURCES =
RECURSIVE_TARGETS = all-recursive check-recursive dvi-recursive \
@@ -60,36 +57,12 @@ RECURSIVE_TARGETS = all-recursive check-recursive dvi-recursive \
install-pdf-recursive install-ps-recursive install-recursive \
installcheck-recursive installdirs-recursive pdf-recursive \
ps-recursive uninstall-recursive
-am__vpath_adj_setup = srcdirstrip=`echo "$(srcdir)" | sed 's|.|.|g'`;
-am__vpath_adj = case $$p in \
- $(srcdir)/*) f=`echo "$$p" | sed "s|^$$srcdirstrip/||"`;; \
- *) f=$$p;; \
- esac;
-am__strip_dir = f=`echo $$p | sed -e 's|^.*/||'`;
-am__install_max = 40
-am__nobase_strip_setup = \
- srcdirstrip=`echo "$(srcdir)" | sed 's/[].[^$$\\*|]/\\\\&/g'`
-am__nobase_strip = \
- for p in $$list; do echo "$$p"; done | sed -e "s|$$srcdirstrip/||"
-am__nobase_list = $(am__nobase_strip_setup); \
- for p in $$list; do echo "$$p $$p"; done | \
- sed "s| $$srcdirstrip/| |;"' / .*\//!s/ .*/ ./; s,\( .*\)/[^/]*$$,\1,' | \
- $(AWK) 'BEGIN { files["."] = "" } { files[$$2] = files[$$2] " " $$1; \
- if (++n[$$2] == $(am__install_max)) \
- { print $$2, files[$$2]; n[$$2] = 0; files[$$2] = "" } } \
- END { for (dir in files) print dir, files[dir] }'
-am__base_list = \
- sed '$$!N;$$!N;$$!N;$$!N;$$!N;$$!N;$$!N;s/\n/ /g' | \
- sed '$$!N;$$!N;$$!N;$$!N;s/\n/ /g'
man1dir = $(mandir)/man1
am__installdirs = "$(DESTDIR)$(man1dir)"
NROFF = nroff
MANS = $(dist_man1_MANS)
RECURSIVE_CLEAN_TARGETS = mostlyclean-recursive clean-recursive \
distclean-recursive maintainer-clean-recursive
-AM_RECURSIVE_TARGETS = $(RECURSIVE_TARGETS:-recursive=) \
- $(RECURSIVE_CLEAN_TARGETS:-recursive=) tags TAGS ctags CTAGS \
- distdir dist dist-all distcheck
ETAGS = etags
CTAGS = ctags
DIST_SUBDIRS = $(SUBDIRS)
@@ -97,34 +70,9 @@ DISTFILES = $(DIST_COMMON) $(DIST_SOURCES) $(TEXINFOS) $(EXTRA_DIST)
distdir = $(PACKAGE)-$(VERSION)
top_distdir = $(distdir)
am__remove_distdir = \
- { test ! -d "$(distdir)" \
- || { find "$(distdir)" -type d ! -perm -200 -exec chmod u+w {} ';' \
- && rm -fr "$(distdir)"; }; }
-am__relativize = \
- dir0=`pwd`; \
- sed_first='s,^\([^/]*\)/.*$$,\1,'; \
- sed_rest='s,^[^/]*/*,,'; \
- sed_last='s,^.*/\([^/]*\)$$,\1,'; \
- sed_butlast='s,/*[^/]*$$,,'; \
- while test -n "$$dir1"; do \
- first=`echo "$$dir1" | sed -e "$$sed_first"`; \
- if test "$$first" != "."; then \
- if test "$$first" = ".."; then \
- dir2=`echo "$$dir0" | sed -e "$$sed_last"`/"$$dir2"; \
- dir0=`echo "$$dir0" | sed -e "$$sed_butlast"`; \
- else \
- first2=`echo "$$dir2" | sed -e "$$sed_first"`; \
- if test "$$first2" = "$$first"; then \
- dir2=`echo "$$dir2" | sed -e "$$sed_rest"`; \
- else \
- dir2="../$$dir2"; \
- fi; \
- dir0="$$dir0"/"$$first"; \
- fi; \
- fi; \
- dir1=`echo "$$dir1" | sed -e "$$sed_rest"`; \
- done; \
- reldir="$$dir2"
+ { test ! -d $(distdir) \
+ || { find $(distdir) -type d ! -perm -200 -exec chmod u+w {} ';' \
+ && rm -fr $(distdir); }; }
DIST_ARCHIVES = $(distdir).tar.gz $(distdir).tar.bz2
GZIP_ENV = --best
distuninstallcheck_listfiles = find . -type f -print
@@ -302,15 +250,15 @@ $(srcdir)/Makefile.in: @MAINTAINER_MODE_TRUE@ $(srcdir)/Makefile.am $(am__confi
@for dep in $?; do \
case '$(am__configure_deps)' in \
*$$dep*) \
- echo ' cd $(srcdir) && $(AUTOMAKE) --foreign'; \
- $(am__cd) $(srcdir) && $(AUTOMAKE) --foreign \
+ echo ' cd $(srcdir) && $(AUTOMAKE) --foreign '; \
+ cd $(srcdir) && $(AUTOMAKE) --foreign \
&& exit 0; \
exit 1;; \
esac; \
done; \
- echo ' cd $(top_srcdir) && $(AUTOMAKE) --foreign Makefile'; \
- $(am__cd) $(top_srcdir) && \
- $(AUTOMAKE) --foreign Makefile
+ echo ' cd $(top_srcdir) && $(AUTOMAKE) --foreign Makefile'; \
+ cd $(top_srcdir) && \
+ $(AUTOMAKE) --foreign Makefile
.PRECIOUS: Makefile
Makefile: $(srcdir)/Makefile.in $(top_builddir)/config.status
@case '$?' in \
@@ -326,44 +274,42 @@ $(top_builddir)/config.status: $(top_srcdir)/configure $(CONFIG_STATUS_DEPENDENC
$(SHELL) ./config.status --recheck
$(top_srcdir)/configure: @MAINTAINER_MODE_TRUE@ $(am__configure_deps)
- $(am__cd) $(srcdir) && $(AUTOCONF)
+ cd $(srcdir) && $(AUTOCONF)
$(ACLOCAL_M4): @MAINTAINER_MODE_TRUE@ $(am__aclocal_m4_deps)
- $(am__cd) $(srcdir) && $(ACLOCAL) $(ACLOCAL_AMFLAGS)
-$(am__aclocal_m4_deps):
+ cd $(srcdir) && $(ACLOCAL) $(ACLOCAL_AMFLAGS)
install-man1: $(dist_man1_MANS)
@$(NORMAL_INSTALL)
test -z "$(man1dir)" || $(MKDIR_P) "$(DESTDIR)$(man1dir)"
- @list='$(dist_man1_MANS)'; test -n "$(man1dir)" || exit 0; \
- { for i in $$list; do echo "$$i"; done; \
- } | while read p; do \
- if test -f $$p; then d=; else d="$(srcdir)/"; fi; \
- echo "$$d$$p"; echo "$$p"; \
- done | \
- sed -e 'n;s,.*/,,;p;h;s,.*\.,,;s,^[^1][0-9a-z]*$$,1,;x' \
- -e 's,\.[0-9a-z]*$$,,;$(transform);G;s,\n,.,' | \
- sed 'N;N;s,\n, ,g' | { \
- list=; while read file base inst; do \
- if test "$$base" = "$$inst"; then list="$$list $$file"; else \
- echo " $(INSTALL_DATA) '$$file' '$(DESTDIR)$(man1dir)/$$inst'"; \
- $(INSTALL_DATA) "$$file" "$(DESTDIR)$(man1dir)/$$inst" || exit $$?; \
- fi; \
- done; \
- for i in $$list; do echo "$$i"; done | $(am__base_list) | \
- while read files; do \
- test -z "$$files" || { \
- echo " $(INSTALL_DATA) $$files '$(DESTDIR)$(man1dir)'"; \
- $(INSTALL_DATA) $$files "$(DESTDIR)$(man1dir)" || exit $$?; }; \
- done; }
-
+ @list='$(dist_man1_MANS)'; \
+ for i in $$list; do \
+ if test -f $$i; then file=$$i; \
+ else file=$(srcdir)/$$i; fi; \
+ ext=`echo $$i | sed -e 's/^.*\\.//'`; \
+ case "$$ext" in \
+ 1*) ;; \
+ *) ext='1' ;; \
+ esac; \
+ inst=`echo $$i | sed -e 's/\\.[0-9a-z]*$$//'`; \
+ inst=`echo $$inst | sed -e 's/^.*\///'`; \
+ inst=`echo $$inst | sed '$(transform)'`.$$ext; \
+ echo " $(INSTALL_DATA) '$$file' '$(DESTDIR)$(man1dir)/$$inst'"; \
+ $(INSTALL_DATA) "$$file" "$(DESTDIR)$(man1dir)/$$inst"; \
+ done
uninstall-man1:
@$(NORMAL_UNINSTALL)
- @list='$(dist_man1_MANS)'; test -n "$(man1dir)" || exit 0; \
- files=`{ for i in $$list; do echo "$$i"; done; \
- } | sed -e 's,.*/,,;h;s,.*\.,,;s,^[^1][0-9a-z]*$$,1,;x' \
- -e 's,\.[0-9a-z]*$$,,;$(transform);G;s,\n,.,'`; \
- test -z "$$files" || { \
- echo " ( cd '$(DESTDIR)$(man1dir)' && rm -f" $$files ")"; \
- cd "$(DESTDIR)$(man1dir)" && rm -f $$files; }
+ @list='$(dist_man1_MANS)'; \
+ for i in $$list; do \
+ ext=`echo $$i | sed -e 's/^.*\\.//'`; \
+ case "$$ext" in \
+ 1*) ;; \
+ *) ext='1' ;; \
+ esac; \
+ inst=`echo $$i | sed -e 's/\\.[0-9a-z]*$$//'`; \
+ inst=`echo $$inst | sed -e 's/^.*\///'`; \
+ inst=`echo $$inst | sed '$(transform)'`.$$ext; \
+ echo " rm -f '$(DESTDIR)$(man1dir)/$$inst'"; \
+ rm -f "$(DESTDIR)$(man1dir)/$$inst"; \
+ done
# This directory's subdirectories are mostly independent; you can cd
# into them and run `make' without going through this Makefile.
@@ -389,7 +335,7 @@ $(RECURSIVE_TARGETS):
else \
local_target="$$target"; \
fi; \
- ($(am__cd) $$subdir && $(MAKE) $(AM_MAKEFLAGS) $$local_target) \
+ (cd $$subdir && $(MAKE) $(AM_MAKEFLAGS) $$local_target) \
|| eval $$failcom; \
done; \
if test "$$dot_seen" = "no"; then \
@@ -423,16 +369,16 @@ $(RECURSIVE_CLEAN_TARGETS):
else \
local_target="$$target"; \
fi; \
- ($(am__cd) $$subdir && $(MAKE) $(AM_MAKEFLAGS) $$local_target) \
+ (cd $$subdir && $(MAKE) $(AM_MAKEFLAGS) $$local_target) \
|| eval $$failcom; \
done && test -z "$$fail"
tags-recursive:
list='$(SUBDIRS)'; for subdir in $$list; do \
- test "$$subdir" = . || ($(am__cd) $$subdir && $(MAKE) $(AM_MAKEFLAGS) tags); \
+ test "$$subdir" = . || (cd $$subdir && $(MAKE) $(AM_MAKEFLAGS) tags); \
done
ctags-recursive:
list='$(SUBDIRS)'; for subdir in $$list; do \
- test "$$subdir" = . || ($(am__cd) $$subdir && $(MAKE) $(AM_MAKEFLAGS) ctags); \
+ test "$$subdir" = . || (cd $$subdir && $(MAKE) $(AM_MAKEFLAGS) ctags); \
done
ID: $(HEADERS) $(SOURCES) $(LISP) $(TAGS_FILES)
@@ -447,7 +393,7 @@ tags: TAGS
TAGS: tags-recursive $(HEADERS) $(SOURCES) $(TAGS_DEPENDENCIES) \
$(TAGS_FILES) $(LISP)
- set x; \
+ tags=; \
here=`pwd`; \
if ($(ETAGS) --etags-include --version) >/dev/null 2>&1; then \
include_option=--etags-include; \
@@ -459,7 +405,7 @@ TAGS: tags-recursive $(HEADERS) $(SOURCES) $(TAGS_DEPENDENCIES) \
list='$(SUBDIRS)'; for subdir in $$list; do \
if test "$$subdir" = .; then :; else \
test ! -f $$subdir/TAGS || \
- set "$$@" "$$include_option=$$here/$$subdir/TAGS"; \
+ tags="$$tags $$include_option=$$here/$$subdir/TAGS"; \
fi; \
done; \
list='$(SOURCES) $(HEADERS) $(LISP) $(TAGS_FILES)'; \
@@ -468,54 +414,36 @@ TAGS: tags-recursive $(HEADERS) $(SOURCES) $(TAGS_DEPENDENCIES) \
done | \
$(AWK) '{ files[$$0] = 1; nonempty = 1; } \
END { if (nonempty) { for (i in files) print i; }; }'`; \
- shift; \
- if test -z "$(ETAGS_ARGS)$$*$$unique"; then :; else \
+ if test -z "$(ETAGS_ARGS)$$tags$$unique"; then :; else \
test -n "$$unique" || unique=$$empty_fix; \
- if test $$# -gt 0; then \
- $(ETAGS) $(ETAGSFLAGS) $(AM_ETAGSFLAGS) $(ETAGS_ARGS) \
- "$$@" $$unique; \
- else \
- $(ETAGS) $(ETAGSFLAGS) $(AM_ETAGSFLAGS) $(ETAGS_ARGS) \
- $$unique; \
- fi; \
+ $(ETAGS) $(ETAGSFLAGS) $(AM_ETAGSFLAGS) $(ETAGS_ARGS) \
+ $$tags $$unique; \
fi
ctags: CTAGS
CTAGS: ctags-recursive $(HEADERS) $(SOURCES) $(TAGS_DEPENDENCIES) \
$(TAGS_FILES) $(LISP)
+ tags=; \
list='$(SOURCES) $(HEADERS) $(LISP) $(TAGS_FILES)'; \
unique=`for i in $$list; do \
if test -f "$$i"; then echo $$i; else echo $(srcdir)/$$i; fi; \
done | \
$(AWK) '{ files[$$0] = 1; nonempty = 1; } \
END { if (nonempty) { for (i in files) print i; }; }'`; \
- test -z "$(CTAGS_ARGS)$$unique" \
+ test -z "$(CTAGS_ARGS)$$tags$$unique" \
|| $(CTAGS) $(CTAGSFLAGS) $(AM_CTAGSFLAGS) $(CTAGS_ARGS) \
- $$unique
+ $$tags $$unique
GTAGS:
here=`$(am__cd) $(top_builddir) && pwd` \
- && $(am__cd) $(top_srcdir) \
- && gtags -i $(GTAGS_ARGS) "$$here"
+ && cd $(top_srcdir) \
+ && gtags -i $(GTAGS_ARGS) $$here
distclean-tags:
-rm -f TAGS ID GTAGS GRTAGS GSYMS GPATH tags
distdir: $(DISTFILES)
- @list='$(MANS)'; if test -n "$$list"; then \
- list=`for p in $$list; do \
- if test -f $$p; then d=; else d="$(srcdir)/"; fi; \
- if test -f "$$d$$p"; then echo "$$d$$p"; else :; fi; done`; \
- if test -n "$$list" && \
- grep 'ab help2man is required to generate this page' $$list >/dev/null; then \
- echo "error: found man pages containing the \`missing help2man' replacement text:" >&2; \
- grep -l 'ab help2man is required to generate this page' $$list | sed 's/^/ /' >&2; \
- echo " to fix them, install help2man, remove and regenerate the man pages;" >&2; \
- echo " typically \`make maintainer-clean' will remove them" >&2; \
- exit 1; \
- else :; fi; \
- else :; fi
$(am__remove_distdir)
- test -d "$(distdir)" || mkdir "$(distdir)"
+ test -d $(distdir) || mkdir $(distdir)
@srcdirstrip=`echo "$(srcdir)" | sed 's/[].[^$$\\*]/\\\\&/g'`; \
topsrcdirstrip=`echo "$(top_srcdir)" | sed 's/[].[^$$\\*]/\\\\&/g'`; \
list='$(DISTFILES)'; \
@@ -531,54 +459,38 @@ distdir: $(DISTFILES)
if test -f $$file || test -d $$file; then d=.; else d=$(srcdir); fi; \
if test -d $$d/$$file; then \
dir=`echo "/$$file" | sed -e 's,/[^/]*$$,,'`; \
- if test -d "$(distdir)/$$file"; then \
- find "$(distdir)/$$file" -type d ! -perm -700 -exec chmod u+rwx {} \;; \
- fi; \
if test -d $(srcdir)/$$file && test $$d != $(srcdir); then \
- cp -fpR $(srcdir)/$$file "$(distdir)$$dir" || exit 1; \
- find "$(distdir)/$$file" -type d ! -perm -700 -exec chmod u+rwx {} \;; \
+ cp -pR $(srcdir)/$$file $(distdir)$$dir || exit 1; \
fi; \
- cp -fpR $$d/$$file "$(distdir)$$dir" || exit 1; \
+ cp -pR $$d/$$file $(distdir)$$dir || exit 1; \
else \
- test -f "$(distdir)/$$file" \
- || cp -p $$d/$$file "$(distdir)/$$file" \
+ test -f $(distdir)/$$file \
+ || cp -p $$d/$$file $(distdir)/$$file \
|| exit 1; \
fi; \
done
- @list='$(DIST_SUBDIRS)'; for subdir in $$list; do \
+ list='$(DIST_SUBDIRS)'; for subdir in $$list; do \
if test "$$subdir" = .; then :; else \
test -d "$(distdir)/$$subdir" \
|| $(MKDIR_P) "$(distdir)/$$subdir" \
|| exit 1; \
- fi; \
- done
- @list='$(DIST_SUBDIRS)'; for subdir in $$list; do \
- if test "$$subdir" = .; then :; else \
- dir1=$$subdir; dir2="$(distdir)/$$subdir"; \
- $(am__relativize); \
- new_distdir=$$reldir; \
- dir1=$$subdir; dir2="$(top_distdir)"; \
- $(am__relativize); \
- new_top_distdir=$$reldir; \
- echo " (cd $$subdir && $(MAKE) $(AM_MAKEFLAGS) top_distdir="$$new_top_distdir" distdir="$$new_distdir" \\"; \
- echo " am__remove_distdir=: am__skip_length_check=: am__skip_mode_fix=: distdir)"; \
- ($(am__cd) $$subdir && \
+ distdir=`$(am__cd) $(distdir) && pwd`; \
+ top_distdir=`$(am__cd) $(top_distdir) && pwd`; \
+ (cd $$subdir && \
$(MAKE) $(AM_MAKEFLAGS) \
- top_distdir="$$new_top_distdir" \
- distdir="$$new_distdir" \
+ top_distdir="$$top_distdir" \
+ distdir="$$distdir/$$subdir" \
am__remove_distdir=: \
am__skip_length_check=: \
- am__skip_mode_fix=: \
distdir) \
|| exit 1; \
fi; \
done
- -test -n "$(am__skip_mode_fix)" \
- || find "$(distdir)" -type d ! -perm -777 -exec chmod a+rwx {} \; -o \
+ -find $(distdir) -type d ! -perm -777 -exec chmod a+rwx {} \; -o \
! -type d ! -perm -444 -links 1 -exec chmod a+r {} \; -o \
! -type d ! -perm -400 -exec chmod a+r {} \; -o \
! -type d ! -perm -444 -exec $(install_sh) -c -m a+r {} {} \; \
- || chmod -R a+r "$(distdir)"
+ || chmod -R a+r $(distdir)
dist-gzip: distdir
tardir=$(distdir) && $(am__tar) | GZIP=$(GZIP_ENV) gzip -c >$(distdir).tar.gz
$(am__remove_distdir)
@@ -590,10 +502,6 @@ dist-lzma: distdir
tardir=$(distdir) && $(am__tar) | lzma -9 -c >$(distdir).tar.lzma
$(am__remove_distdir)
-dist-xz: distdir
- tardir=$(distdir) && $(am__tar) | xz -c >$(distdir).tar.xz
- $(am__remove_distdir)
-
dist-tarZ: distdir
tardir=$(distdir) && $(am__tar) | compress -c >$(distdir).tar.Z
$(am__remove_distdir)
@@ -623,8 +531,6 @@ distcheck: dist
bunzip2 -c $(distdir).tar.bz2 | $(am__untar) ;;\
*.tar.lzma*) \
unlzma -c $(distdir).tar.lzma | $(am__untar) ;;\
- *.tar.xz*) \
- xz -dc $(distdir).tar.xz | $(am__untar) ;;\
*.tar.Z*) \
uncompress -c $(distdir).tar.Z | $(am__untar) ;;\
*.shar.gz*) \
@@ -636,11 +542,9 @@ distcheck: dist
mkdir $(distdir)/_build
mkdir $(distdir)/_inst
chmod a-w $(distdir)
- test -d $(distdir)/_build || exit 0; \
dc_install_base=`$(am__cd) $(distdir)/_inst && pwd | sed -e 's,^[^:\\/]:[\\/],/,'` \
&& dc_destdir="$${TMPDIR-/tmp}/am-dc-$$$$/" \
- && am__cwd=`pwd` \
- && $(am__cd) $(distdir)/_build \
+ && cd $(distdir)/_build \
&& ../configure --srcdir=.. --prefix="$$dc_install_base" \
$(DISTCHECK_CONFIGURE_FLAGS) \
&& $(MAKE) $(AM_MAKEFLAGS) \
@@ -662,15 +566,13 @@ distcheck: dist
&& rm -rf "$$dc_destdir" \
&& $(MAKE) $(AM_MAKEFLAGS) dist \
&& rm -rf $(DIST_ARCHIVES) \
- && $(MAKE) $(AM_MAKEFLAGS) distcleancheck \
- && cd "$$am__cwd" \
- || exit 1
+ && $(MAKE) $(AM_MAKEFLAGS) distcleancheck
$(am__remove_distdir)
@(echo "$(distdir) archives ready for distribution: "; \
list='$(DIST_ARCHIVES)'; for i in $$list; do echo $$i; done) | \
sed -e 1h -e 1s/./=/g -e 1p -e 1x -e '$$p' -e '$$x'
distuninstallcheck:
- @$(am__cd) '$(distuninstallcheck_dir)' \
+ @cd $(distuninstallcheck_dir) \
&& test `$(distuninstallcheck_listfiles) | wc -l` -le 1 \
|| { echo "ERROR: files left after uninstall:" ; \
if test -n "$(DESTDIR)"; then \
@@ -715,7 +617,6 @@ clean-generic:
distclean-generic:
-test -z "$(CONFIG_CLEAN_FILES)" || rm -f $(CONFIG_CLEAN_FILES)
- -test . = "$(srcdir)" || test -z "$(CONFIG_CLEAN_VPATH_FILES)" || rm -f $(CONFIG_CLEAN_VPATH_FILES)
maintainer-clean-generic:
@echo "This command is intended for maintainers to use"
@@ -735,8 +636,6 @@ dvi-am:
html: html-recursive
-html-am:
-
info: info-recursive
info-am:
@@ -745,28 +644,18 @@ install-data-am: install-man
install-dvi: install-dvi-recursive
-install-dvi-am:
-
install-exec-am:
install-html: install-html-recursive
-install-html-am:
-
install-info: install-info-recursive
-install-info-am:
-
install-man: install-man1
install-pdf: install-pdf-recursive
-install-pdf-am:
-
install-ps: install-ps-recursive
-install-ps-am:
-
installcheck-am:
maintainer-clean: maintainer-clean-recursive
@@ -791,26 +680,25 @@ uninstall-am: uninstall-man
uninstall-man: uninstall-man1
-.MAKE: $(RECURSIVE_CLEAN_TARGETS) $(RECURSIVE_TARGETS) ctags-recursive \
- install-am install-strip tags-recursive
+.MAKE: $(RECURSIVE_CLEAN_TARGETS) $(RECURSIVE_TARGETS) install-am \
+ install-strip
.PHONY: $(RECURSIVE_CLEAN_TARGETS) $(RECURSIVE_TARGETS) CTAGS GTAGS \
all all-am am--refresh check check-am clean clean-generic \
ctags ctags-recursive dist dist-all dist-bzip2 dist-gzip \
- dist-lzma dist-shar dist-tarZ dist-xz dist-zip distcheck \
- distclean distclean-generic distclean-tags distcleancheck \
- distdir distuninstallcheck dvi dvi-am html html-am info \
- info-am install install-am install-data install-data-am \
- install-dvi install-dvi-am install-exec install-exec-am \
- install-html install-html-am install-info install-info-am \
- install-man install-man1 install-pdf install-pdf-am install-ps \
+ dist-lzma dist-shar dist-tarZ dist-zip distcheck distclean \
+ distclean-generic distclean-tags distcleancheck distdir \
+ distuninstallcheck dvi dvi-am html html-am info info-am \
+ install install-am install-data install-data-am install-dvi \
+ install-dvi-am install-exec install-exec-am install-html \
+ install-html-am install-info install-info-am install-man \
+ install-man1 install-pdf install-pdf-am install-ps \
install-ps-am install-strip installcheck installcheck-am \
installdirs installdirs-am maintainer-clean \
maintainer-clean-generic mostlyclean mostlyclean-generic pdf \
pdf-am ps ps-am tags tags-recursive uninstall uninstall-am \
uninstall-man uninstall-man1
-
# Tell versions [3.59,3.63) of GNU make to not export all variables.
# Otherwise a system limit (for SysV at least) may be exceeded.
.NOEXPORT:
diff --git a/Build/source/texk/texlive/aclocal.m4 b/Build/source/texk/texlive/aclocal.m4
index d360465f230..542504c5f15 100644
--- a/Build/source/texk/texlive/aclocal.m4
+++ b/Build/source/texk/texlive/aclocal.m4
@@ -1,7 +1,7 @@
-# generated automatically by aclocal 1.11 -*- Autoconf -*-
+# generated automatically by aclocal 1.10.2 -*- Autoconf -*-
# Copyright (C) 1996, 1997, 1998, 1999, 2000, 2001, 2002, 2003, 2004,
-# 2005, 2006, 2007, 2008, 2009 Free Software Foundation, Inc.
+# 2005, 2006, 2007, 2008 Free Software Foundation, Inc.
# This file is free software; the Free Software Foundation
# gives unlimited permission to copy and/or distribute it,
# with or without modifications, as long as this notice is preserved.
@@ -31,10 +31,10 @@ To do so, use the procedure documented by the package, typically `autoreconf'.])
# generated from the m4 files accompanying Automake X.Y.
# (This private macro should not be called outside this file.)
AC_DEFUN([AM_AUTOMAKE_VERSION],
-[am__api_version='1.11'
+[am__api_version='1.10'
dnl Some users find AM_AUTOMAKE_VERSION and mistake it for a way to
dnl require some minimum version. Point them to the right macro.
-m4_if([$1], [1.11], [],
+m4_if([$1], [1.10.2], [],
[AC_FATAL([Do not call $0, use AM_INIT_AUTOMAKE([$1]).])])dnl
])
@@ -50,7 +50,7 @@ m4_define([_AM_AUTOCONF_VERSION], [])
# Call AM_AUTOMAKE_VERSION and AM_AUTOMAKE_VERSION so they can be traced.
# This function is AC_REQUIREd by AM_INIT_AUTOMAKE.
AC_DEFUN([AM_SET_CURRENT_AUTOMAKE_VERSION],
-[AM_AUTOMAKE_VERSION([1.11])dnl
+[AM_AUTOMAKE_VERSION([1.10.2])dnl
m4_ifndef([AC_AUTOCONF_VERSION],
[m4_copy([m4_PACKAGE_VERSION], [AC_AUTOCONF_VERSION])])dnl
_AM_AUTOCONF_VERSION(m4_defn([AC_AUTOCONF_VERSION]))])
@@ -110,14 +110,14 @@ am_aux_dir=`cd $ac_aux_dir && pwd`
# AM_CONDITIONAL -*- Autoconf -*-
-# Copyright (C) 1997, 2000, 2001, 2003, 2004, 2005, 2006, 2008
+# Copyright (C) 1997, 2000, 2001, 2003, 2004, 2005, 2006
# Free Software Foundation, Inc.
#
# This file is free software; the Free Software Foundation
# gives unlimited permission to copy and/or distribute it,
# with or without modifications, as long as this notice is preserved.
-# serial 9
+# serial 8
# AM_CONDITIONAL(NAME, SHELL-CONDITION)
# -------------------------------------
@@ -130,7 +130,6 @@ AC_SUBST([$1_TRUE])dnl
AC_SUBST([$1_FALSE])dnl
_AM_SUBST_NOTMAKE([$1_TRUE])dnl
_AM_SUBST_NOTMAKE([$1_FALSE])dnl
-m4_define([_AM_COND_VALUE_$1], [$2])dnl
if $2; then
$1_TRUE=
$1_FALSE='#'
@@ -144,14 +143,14 @@ AC_CONFIG_COMMANDS_PRE(
Usually this means the macro was only invoked conditionally.]])
fi])])
-# Copyright (C) 1999, 2000, 2001, 2002, 2003, 2004, 2005, 2006, 2009
+# Copyright (C) 1999, 2000, 2001, 2002, 2003, 2004, 2005, 2006
# Free Software Foundation, Inc.
#
# This file is free software; the Free Software Foundation
# gives unlimited permission to copy and/or distribute it,
# with or without modifications, as long as this notice is preserved.
-# serial 10
+# serial 9
# There are a few dirty hacks below to avoid letting `AC_PROG_CC' be
# written in clear, in which case automake, when reading aclocal.m4,
@@ -208,16 +207,6 @@ AC_CACHE_CHECK([dependency style of $depcc],
if test "$am_compiler_list" = ""; then
am_compiler_list=`sed -n ['s/^#*\([a-zA-Z0-9]*\))$/\1/p'] < ./depcomp`
fi
- am__universal=false
- m4_case([$1], [CC],
- [case " $depcc " in #(
- *\ -arch\ *\ -arch\ *) am__universal=true ;;
- esac],
- [CXX],
- [case " $depcc " in #(
- *\ -arch\ *\ -arch\ *) am__universal=true ;;
- esac])
-
for depmode in $am_compiler_list; do
# Setup a source with many dependencies, because some compilers
# like to wrap large dependency lists on column 80 (with \), and
@@ -235,17 +224,7 @@ AC_CACHE_CHECK([dependency style of $depcc],
done
echo "${am__include} ${am__quote}sub/conftest.Po${am__quote}" > confmf
- # We check with `-c' and `-o' for the sake of the "dashmstdout"
- # mode. It turns out that the SunPro C++ compiler does not properly
- # handle `-M -o', and we need to detect this. Also, some Intel
- # versions had trouble with output in subdirs
- am__obj=sub/conftest.${OBJEXT-o}
- am__minus_obj="-o $am__obj"
case $depmode in
- gcc)
- # This depmode causes a compiler race in universal mode.
- test "$am__universal" = false || continue
- ;;
nosideeffect)
# after this tag, mechanisms are not by side-effect, so they'll
# only be used when explicitly requested
@@ -255,23 +234,19 @@ AC_CACHE_CHECK([dependency style of $depcc],
break
fi
;;
- msvisualcpp | msvcmsys)
- # This compiler won't grok `-c -o', but also, the minuso test has
- # not run yet. These depmodes are late enough in the game, and
- # so weak that their functioning should not be impacted.
- am__obj=conftest.${OBJEXT-o}
- am__minus_obj=
- ;;
none) break ;;
esac
+ # We check with `-c' and `-o' for the sake of the "dashmstdout"
+ # mode. It turns out that the SunPro C++ compiler does not properly
+ # handle `-M -o', and we need to detect this.
if depmode=$depmode \
- source=sub/conftest.c object=$am__obj \
+ source=sub/conftest.c object=sub/conftest.${OBJEXT-o} \
depfile=sub/conftest.Po tmpdepfile=sub/conftest.TPo \
- $SHELL ./depcomp $depcc -c $am__minus_obj sub/conftest.c \
+ $SHELL ./depcomp $depcc -c -o sub/conftest.${OBJEXT-o} sub/conftest.c \
>/dev/null 2>conftest.err &&
grep sub/conftst1.h sub/conftest.Po > /dev/null 2>&1 &&
grep sub/conftst6.h sub/conftest.Po > /dev/null 2>&1 &&
- grep $am__obj sub/conftest.Po > /dev/null 2>&1 &&
+ grep sub/conftest.${OBJEXT-o} sub/conftest.Po > /dev/null 2>&1 &&
${MAKE-make} -s -f confmf > /dev/null 2>&1; then
# icc doesn't choke on unknown options, it will just issue warnings
# or remarks (even with -Werror). So we grep stderr for any message
@@ -335,61 +310,59 @@ _AM_SUBST_NOTMAKE([AMDEPBACKSLASH])dnl
# gives unlimited permission to copy and/or distribute it,
# with or without modifications, as long as this notice is preserved.
-#serial 5
+#serial 4
# _AM_OUTPUT_DEPENDENCY_COMMANDS
# ------------------------------
AC_DEFUN([_AM_OUTPUT_DEPENDENCY_COMMANDS],
-[{
- # Autoconf 2.62 quotes --file arguments for eval, but not when files
- # are listed without --file. Let's play safe and only enable the eval
- # if we detect the quoting.
- case $CONFIG_FILES in
- *\'*) eval set x "$CONFIG_FILES" ;;
- *) set x $CONFIG_FILES ;;
- esac
- shift
- for mf
- do
- # Strip MF so we end up with the name of the file.
- mf=`echo "$mf" | sed -e 's/:.*$//'`
- # Check whether this is an Automake generated Makefile or not.
- # We used to match only the files named `Makefile.in', but
- # some people rename them; so instead we look at the file content.
- # Grep'ing the first line is not enough: some people post-process
- # each Makefile.in and add a new line on top of each file to say so.
- # Grep'ing the whole file is not good either: AIX grep has a line
- # limit of 2048, but all sed's we know have understand at least 4000.
- if sed -n 's,^#.*generated by automake.*,X,p' "$mf" | grep X >/dev/null 2>&1; then
- dirpart=`AS_DIRNAME("$mf")`
- else
- continue
- fi
- # Extract the definition of DEPDIR, am__include, and am__quote
- # from the Makefile without running `make'.
- DEPDIR=`sed -n 's/^DEPDIR = //p' < "$mf"`
- test -z "$DEPDIR" && continue
- am__include=`sed -n 's/^am__include = //p' < "$mf"`
- test -z "am__include" && continue
- am__quote=`sed -n 's/^am__quote = //p' < "$mf"`
- # When using ansi2knr, U may be empty or an underscore; expand it
- U=`sed -n 's/^U = //p' < "$mf"`
- # Find all dependency output files, they are included files with
- # $(DEPDIR) in their names. We invoke sed twice because it is the
- # simplest approach to changing $(DEPDIR) to its actual value in the
- # expansion.
- for file in `sed -n "
- s/^$am__include $am__quote\(.*(DEPDIR).*\)$am__quote"'$/\1/p' <"$mf" | \
- sed -e 's/\$(DEPDIR)/'"$DEPDIR"'/g' -e 's/\$U/'"$U"'/g'`; do
- # Make sure the directory exists.
- test -f "$dirpart/$file" && continue
- fdir=`AS_DIRNAME(["$file"])`
- AS_MKDIR_P([$dirpart/$fdir])
- # echo "creating $dirpart/$file"
- echo '# dummy' > "$dirpart/$file"
- done
+[# Autoconf 2.62 quotes --file arguments for eval, but not when files
+# are listed without --file. Let's play safe and only enable the eval
+# if we detect the quoting.
+case $CONFIG_FILES in
+*\'*) eval set x "$CONFIG_FILES" ;;
+*) set x $CONFIG_FILES ;;
+esac
+shift
+for mf
+do
+ # Strip MF so we end up with the name of the file.
+ mf=`echo "$mf" | sed -e 's/:.*$//'`
+ # Check whether this is an Automake generated Makefile or not.
+ # We used to match only the files named `Makefile.in', but
+ # some people rename them; so instead we look at the file content.
+ # Grep'ing the first line is not enough: some people post-process
+ # each Makefile.in and add a new line on top of each file to say so.
+ # Grep'ing the whole file is not good either: AIX grep has a line
+ # limit of 2048, but all sed's we know have understand at least 4000.
+ if sed -n 's,^#.*generated by automake.*,X,p' "$mf" | grep X >/dev/null 2>&1; then
+ dirpart=`AS_DIRNAME("$mf")`
+ else
+ continue
+ fi
+ # Extract the definition of DEPDIR, am__include, and am__quote
+ # from the Makefile without running `make'.
+ DEPDIR=`sed -n 's/^DEPDIR = //p' < "$mf"`
+ test -z "$DEPDIR" && continue
+ am__include=`sed -n 's/^am__include = //p' < "$mf"`
+ test -z "am__include" && continue
+ am__quote=`sed -n 's/^am__quote = //p' < "$mf"`
+ # When using ansi2knr, U may be empty or an underscore; expand it
+ U=`sed -n 's/^U = //p' < "$mf"`
+ # Find all dependency output files, they are included files with
+ # $(DEPDIR) in their names. We invoke sed twice because it is the
+ # simplest approach to changing $(DEPDIR) to its actual value in the
+ # expansion.
+ for file in `sed -n "
+ s/^$am__include $am__quote\(.*(DEPDIR).*\)$am__quote"'$/\1/p' <"$mf" | \
+ sed -e 's/\$(DEPDIR)/'"$DEPDIR"'/g' -e 's/\$U/'"$U"'/g'`; do
+ # Make sure the directory exists.
+ test -f "$dirpart/$file" && continue
+ fdir=`AS_DIRNAME(["$file"])`
+ AS_MKDIR_P([$dirpart/$fdir])
+ # echo "creating $dirpart/$file"
+ echo '# dummy' > "$dirpart/$file"
done
-}
+done
])# _AM_OUTPUT_DEPENDENCY_COMMANDS
@@ -409,13 +382,13 @@ AC_DEFUN([AM_OUTPUT_DEPENDENCY_COMMANDS],
# Do all the work for Automake. -*- Autoconf -*-
# Copyright (C) 1996, 1997, 1998, 1999, 2000, 2001, 2002, 2003, 2004,
-# 2005, 2006, 2008, 2009 Free Software Foundation, Inc.
+# 2005, 2006, 2008 Free Software Foundation, Inc.
#
# This file is free software; the Free Software Foundation
# gives unlimited permission to copy and/or distribute it,
# with or without modifications, as long as this notice is preserved.
-# serial 16
+# serial 13
# This macro actually does too much. Some checks are only needed if
# your package does certain things. But this isn't really a big deal.
@@ -432,7 +405,7 @@ AC_DEFUN([AM_OUTPUT_DEPENDENCY_COMMANDS],
# arguments mandatory, and then we can depend on a new Autoconf
# release and drop the old call support.
AC_DEFUN([AM_INIT_AUTOMAKE],
-[AC_PREREQ([2.62])dnl
+[AC_PREREQ([2.60])dnl
dnl Autoconf wants to disallow AM_ names. We explicitly allow
dnl the ones we care about.
m4_pattern_allow([^AM_[A-Z]+FLAGS$])dnl
@@ -483,8 +456,8 @@ AM_MISSING_PROG(AUTOCONF, autoconf)
AM_MISSING_PROG(AUTOMAKE, automake-${am__api_version})
AM_MISSING_PROG(AUTOHEADER, autoheader)
AM_MISSING_PROG(MAKEINFO, makeinfo)
-AC_REQUIRE([AM_PROG_INSTALL_SH])dnl
-AC_REQUIRE([AM_PROG_INSTALL_STRIP])dnl
+AM_PROG_INSTALL_SH
+AM_PROG_INSTALL_STRIP
AC_REQUIRE([AM_PROG_MKDIR_P])dnl
# We need awk for the "check" target. The system "awk" is bad on
# some platforms.
@@ -492,37 +465,24 @@ AC_REQUIRE([AC_PROG_AWK])dnl
AC_REQUIRE([AC_PROG_MAKE_SET])dnl
AC_REQUIRE([AM_SET_LEADING_DOT])dnl
_AM_IF_OPTION([tar-ustar], [_AM_PROG_TAR([ustar])],
- [_AM_IF_OPTION([tar-pax], [_AM_PROG_TAR([pax])],
- [_AM_PROG_TAR([v7])])])
+ [_AM_IF_OPTION([tar-pax], [_AM_PROG_TAR([pax])],
+ [_AM_PROG_TAR([v7])])])
_AM_IF_OPTION([no-dependencies],,
[AC_PROVIDE_IFELSE([AC_PROG_CC],
- [_AM_DEPENDENCIES(CC)],
- [define([AC_PROG_CC],
- defn([AC_PROG_CC])[_AM_DEPENDENCIES(CC)])])dnl
+ [_AM_DEPENDENCIES(CC)],
+ [define([AC_PROG_CC],
+ defn([AC_PROG_CC])[_AM_DEPENDENCIES(CC)])])dnl
AC_PROVIDE_IFELSE([AC_PROG_CXX],
- [_AM_DEPENDENCIES(CXX)],
- [define([AC_PROG_CXX],
- defn([AC_PROG_CXX])[_AM_DEPENDENCIES(CXX)])])dnl
+ [_AM_DEPENDENCIES(CXX)],
+ [define([AC_PROG_CXX],
+ defn([AC_PROG_CXX])[_AM_DEPENDENCIES(CXX)])])dnl
AC_PROVIDE_IFELSE([AC_PROG_OBJC],
- [_AM_DEPENDENCIES(OBJC)],
- [define([AC_PROG_OBJC],
- defn([AC_PROG_OBJC])[_AM_DEPENDENCIES(OBJC)])])dnl
+ [_AM_DEPENDENCIES(OBJC)],
+ [define([AC_PROG_OBJC],
+ defn([AC_PROG_OBJC])[_AM_DEPENDENCIES(OBJC)])])dnl
])
-_AM_IF_OPTION([silent-rules], [AC_REQUIRE([AM_SILENT_RULES])])dnl
-dnl The `parallel-tests' driver may need to know about EXEEXT, so add the
-dnl `am__EXEEXT' conditional if _AM_COMPILER_EXEEXT was seen. This macro
-dnl is hooked onto _AC_COMPILER_EXEEXT early, see below.
-AC_CONFIG_COMMANDS_PRE(dnl
-[m4_provide_if([_AM_COMPILER_EXEEXT],
- [AM_CONDITIONAL([am__EXEEXT], [test -n "$EXEEXT"])])])dnl
])
-dnl Hook into `_AC_COMPILER_EXEEXT' early to learn its expansion. Do not
-dnl add the conditional right here, as _AC_COMPILER_EXEEXT may be further
-dnl mangled by Autoconf and run in a shell conditional statement.
-m4_define([_AC_COMPILER_EXEEXT],
-m4_defn([_AC_COMPILER_EXEEXT])[m4_provide([_AM_COMPILER_EXEEXT])])
-
# When config.status generates a header, we must update the stamp-h file.
# This file resides in the same directory as the config header
@@ -545,7 +505,7 @@ for _am_header in $config_headers :; do
done
echo "timestamp for $_am_arg" >`AS_DIRNAME(["$_am_arg"])`/stamp-h[]$_am_stamp_count])
-# Copyright (C) 2001, 2003, 2005, 2008 Free Software Foundation, Inc.
+# Copyright (C) 2001, 2003, 2005 Free Software Foundation, Inc.
#
# This file is free software; the Free Software Foundation
# gives unlimited permission to copy and/or distribute it,
@@ -556,14 +516,7 @@ echo "timestamp for $_am_arg" >`AS_DIRNAME(["$_am_arg"])`/stamp-h[]$_am_stamp_co
# Define $install_sh.
AC_DEFUN([AM_PROG_INSTALL_SH],
[AC_REQUIRE([AM_AUX_DIR_EXPAND])dnl
-if test x"${install_sh}" != xset; then
- case $am_aux_dir in
- *\ * | *\ *)
- install_sh="\${SHELL} '$am_aux_dir/install-sh'" ;;
- *)
- install_sh="\${SHELL} $am_aux_dir/install-sh"
- esac
-fi
+install_sh=${install_sh-"\$(SHELL) $am_aux_dir/install-sh"}
AC_SUBST(install_sh)])
# Copyright (C) 2003, 2005 Free Software Foundation, Inc.
@@ -590,38 +543,27 @@ AC_SUBST([am__leading_dot])])
# Add --enable-maintainer-mode option to configure. -*- Autoconf -*-
# From Jim Meyering
-# Copyright (C) 1996, 1998, 2000, 2001, 2002, 2003, 2004, 2005, 2008
+# Copyright (C) 1996, 1998, 2000, 2001, 2002, 2003, 2004, 2005
# Free Software Foundation, Inc.
#
# This file is free software; the Free Software Foundation
# gives unlimited permission to copy and/or distribute it,
# with or without modifications, as long as this notice is preserved.
-# serial 5
+# serial 4
-# AM_MAINTAINER_MODE([DEFAULT-MODE])
-# ----------------------------------
-# Control maintainer-specific portions of Makefiles.
-# Default is to disable them, unless `enable' is passed literally.
-# For symmetry, `disable' may be passed as well. Anyway, the user
-# can override the default with the --enable/--disable switch.
AC_DEFUN([AM_MAINTAINER_MODE],
-[m4_case(m4_default([$1], [disable]),
- [enable], [m4_define([am_maintainer_other], [disable])],
- [disable], [m4_define([am_maintainer_other], [enable])],
- [m4_define([am_maintainer_other], [enable])
- m4_warn([syntax], [unexpected argument to AM@&t@_MAINTAINER_MODE: $1])])
-AC_MSG_CHECKING([whether to am_maintainer_other maintainer-specific portions of Makefiles])
- dnl maintainer-mode's default is 'disable' unless 'enable' is passed
- AC_ARG_ENABLE([maintainer-mode],
-[ --][am_maintainer_other][-maintainer-mode am_maintainer_other make rules and dependencies not useful
+[AC_MSG_CHECKING([whether to enable maintainer-specific portions of Makefiles])
+ dnl maintainer-mode is disabled by default
+ AC_ARG_ENABLE(maintainer-mode,
+[ --enable-maintainer-mode enable make rules and dependencies not useful
(and sometimes confusing) to the casual installer],
- [USE_MAINTAINER_MODE=$enableval],
- [USE_MAINTAINER_MODE=]m4_if(am_maintainer_other, [enable], [no], [yes]))
+ USE_MAINTAINER_MODE=$enableval,
+ USE_MAINTAINER_MODE=no)
AC_MSG_RESULT([$USE_MAINTAINER_MODE])
- AM_CONDITIONAL([MAINTAINER_MODE], [test $USE_MAINTAINER_MODE = yes])
+ AM_CONDITIONAL(MAINTAINER_MODE, [test $USE_MAINTAINER_MODE = yes])
MAINT=$MAINTAINER_MODE_TRUE
- AC_SUBST([MAINT])dnl
+ AC_SUBST(MAINT)dnl
]
)
@@ -629,13 +571,13 @@ AU_DEFUN([jm_MAINTAINER_MODE], [AM_MAINTAINER_MODE])
# Check to see how 'make' treats includes. -*- Autoconf -*-
-# Copyright (C) 2001, 2002, 2003, 2005, 2009 Free Software Foundation, Inc.
+# Copyright (C) 2001, 2002, 2003, 2005 Free Software Foundation, Inc.
#
# This file is free software; the Free Software Foundation
# gives unlimited permission to copy and/or distribute it,
# with or without modifications, as long as this notice is preserved.
-# serial 4
+# serial 3
# AM_MAKE_INCLUDE()
# -----------------
@@ -644,7 +586,7 @@ AC_DEFUN([AM_MAKE_INCLUDE],
[am_make=${MAKE-make}
cat > confinc << 'END'
am__doit:
- @echo this is the am__doit target
+ @echo done
.PHONY: am__doit
END
# If we don't find an include directive, just comment out the code.
@@ -654,24 +596,24 @@ am__quote=
_am_result=none
# First try GNU make style include.
echo "include confinc" > confmf
-# Ignore all kinds of additional output from `make'.
-case `$am_make -s -f confmf 2> /dev/null` in #(
-*the\ am__doit\ target*)
- am__include=include
- am__quote=
- _am_result=GNU
- ;;
-esac
+# We grep out `Entering directory' and `Leaving directory'
+# messages which can occur if `w' ends up in MAKEFLAGS.
+# In particular we don't look at `^make:' because GNU make might
+# be invoked under some other name (usually "gmake"), in which
+# case it prints its new name instead of `make'.
+if test "`$am_make -s -f confmf 2> /dev/null | grep -v 'ing directory'`" = "done"; then
+ am__include=include
+ am__quote=
+ _am_result=GNU
+fi
# Now try BSD make style include.
if test "$am__include" = "#"; then
echo '.include "confinc"' > confmf
- case `$am_make -s -f confmf 2> /dev/null` in #(
- *the\ am__doit\ target*)
- am__include=.include
- am__quote="\""
- _am_result=BSD
- ;;
- esac
+ if test "`$am_make -s -f confmf 2> /dev/null`" = "done"; then
+ am__include=.include
+ am__quote="\""
+ _am_result=BSD
+ fi
fi
AC_SUBST([am__include])
AC_SUBST([am__quote])
@@ -681,14 +623,14 @@ rm -f confinc confmf
# Fake the existence of programs that GNU maintainers use. -*- Autoconf -*-
-# Copyright (C) 1997, 1999, 2000, 2001, 2003, 2004, 2005, 2008
+# Copyright (C) 1997, 1999, 2000, 2001, 2003, 2004, 2005
# Free Software Foundation, Inc.
#
# This file is free software; the Free Software Foundation
# gives unlimited permission to copy and/or distribute it,
# with or without modifications, as long as this notice is preserved.
-# serial 6
+# serial 5
# AM_MISSING_PROG(NAME, PROGRAM)
# ------------------------------
@@ -705,14 +647,7 @@ AC_SUBST($1)])
AC_DEFUN([AM_MISSING_HAS_RUN],
[AC_REQUIRE([AM_AUX_DIR_EXPAND])dnl
AC_REQUIRE_AUX_FILE([missing])dnl
-if test x"${MISSING+set}" != xset; then
- case $am_aux_dir in
- *\ * | *\ *)
- MISSING="\${SHELL} \"$am_aux_dir/missing\"" ;;
- *)
- MISSING="\${SHELL} $am_aux_dir/missing" ;;
- esac
-fi
+test x"${MISSING+set}" = xset || MISSING="\${SHELL} $am_aux_dir/missing"
# Use eval to expand $SHELL
if eval "$MISSING --run true"; then
am_missing_run="$MISSING --run "
@@ -783,14 +718,14 @@ AC_DEFUN([_AM_IF_OPTION],
# Check to make sure that the build environment is sane. -*- Autoconf -*-
-# Copyright (C) 1996, 1997, 2000, 2001, 2003, 2005, 2008
+# Copyright (C) 1996, 1997, 2000, 2001, 2003, 2005
# Free Software Foundation, Inc.
#
# This file is free software; the Free Software Foundation
# gives unlimited permission to copy and/or distribute it,
# with or without modifications, as long as this notice is preserved.
-# serial 5
+# serial 4
# AM_SANITY_CHECK
# ---------------
@@ -799,29 +734,16 @@ AC_DEFUN([AM_SANITY_CHECK],
# Just in case
sleep 1
echo timestamp > conftest.file
-# Reject unsafe characters in $srcdir or the absolute working directory
-# name. Accept space and tab only in the latter.
-am_lf='
-'
-case `pwd` in
- *[[\\\"\#\$\&\'\`$am_lf]]*)
- AC_MSG_ERROR([unsafe absolute working directory name]);;
-esac
-case $srcdir in
- *[[\\\"\#\$\&\'\`$am_lf\ \ ]]*)
- AC_MSG_ERROR([unsafe srcdir value: `$srcdir']);;
-esac
-
# Do `set' in a subshell so we don't clobber the current shell's
# arguments. Must try -L first in case configure is actually a
# symlink; some systems play weird games with the mod time of symlinks
# (eg FreeBSD returns the mod time of the symlink's containing
# directory).
if (
- set X `ls -Lt "$srcdir/configure" conftest.file 2> /dev/null`
+ set X `ls -Lt $srcdir/configure conftest.file 2> /dev/null`
if test "$[*]" = "X"; then
# -L didn't work.
- set X `ls -t "$srcdir/configure" conftest.file`
+ set X `ls -t $srcdir/configure conftest.file`
fi
rm -f conftest.file
if test "$[*]" != "X $srcdir/configure conftest.file" \
@@ -874,25 +796,18 @@ fi
INSTALL_STRIP_PROGRAM="\$(install_sh) -c -s"
AC_SUBST([INSTALL_STRIP_PROGRAM])])
-# Copyright (C) 2006, 2008 Free Software Foundation, Inc.
+# Copyright (C) 2006 Free Software Foundation, Inc.
#
# This file is free software; the Free Software Foundation
# gives unlimited permission to copy and/or distribute it,
# with or without modifications, as long as this notice is preserved.
-# serial 2
-
# _AM_SUBST_NOTMAKE(VARIABLE)
# ---------------------------
# Prevent Automake from outputting VARIABLE = @VARIABLE@ in Makefile.in.
# This macro is traced by Automake.
AC_DEFUN([_AM_SUBST_NOTMAKE])
-# AM_SUBST_NOTMAKE(VARIABLE)
-# ---------------------------
-# Public sister of _AM_SUBST_NOTMAKE.
-AC_DEFUN([AM_SUBST_NOTMAKE], [_AM_SUBST_NOTMAKE($@)])
-
# Check how to create a tarball. -*- Autoconf -*-
# Copyright (C) 2004, 2005 Free Software Foundation, Inc.
diff --git a/Build/source/texk/texlive/configure b/Build/source/texk/texlive/configure
index ca7c536ff45..318462f5b01 100755
--- a/Build/source/texk/texlive/configure
+++ b/Build/source/texk/texlive/configure
@@ -601,9 +601,7 @@ PACKAGE_STRING='TeX Live 2009'
PACKAGE_BUGREPORT='tex-k@tug.org'
ac_unique_file="hugetex"
-ac_subst_vars='am__EXEEXT_FALSE
-am__EXEEXT_TRUE
-LTLIBOBJS
+ac_subst_vars='LTLIBOBJS
LIBOBJS
LN_S
am__fastdepCC_FALSE
@@ -1822,7 +1820,7 @@ ac_configure="$SHELL $ac_aux_dir/configure" # Please don't use this var.
-am__api_version='1.11'
+am__api_version='1.10'
# Find a good install program. We prefer a C program (faster),
# so one script is as good as another. But avoid the broken or
@@ -1922,33 +1920,16 @@ $as_echo_n "checking whether build environment is sane... " >&6; }
# Just in case
sleep 1
echo timestamp > conftest.file
-# Reject unsafe characters in $srcdir or the absolute working directory
-# name. Accept space and tab only in the latter.
-am_lf='
-'
-case `pwd` in
- *[\\\"\#\$\&\'\`$am_lf]*)
- { { $as_echo "$as_me:$LINENO: error: unsafe absolute working directory name" >&5
-$as_echo "$as_me: error: unsafe absolute working directory name" >&2;}
- { (exit 1); exit 1; }; };;
-esac
-case $srcdir in
- *[\\\"\#\$\&\'\`$am_lf\ \ ]*)
- { { $as_echo "$as_me:$LINENO: error: unsafe srcdir value: \`$srcdir'" >&5
-$as_echo "$as_me: error: unsafe srcdir value: \`$srcdir'" >&2;}
- { (exit 1); exit 1; }; };;
-esac
-
# Do `set' in a subshell so we don't clobber the current shell's
# arguments. Must try -L first in case configure is actually a
# symlink; some systems play weird games with the mod time of symlinks
# (eg FreeBSD returns the mod time of the symlink's containing
# directory).
if (
- set X `ls -Lt "$srcdir/configure" conftest.file 2> /dev/null`
+ set X `ls -Lt $srcdir/configure conftest.file 2> /dev/null`
if test "$*" = "X"; then
# -L didn't work.
- set X `ls -t "$srcdir/configure" conftest.file`
+ set X `ls -t $srcdir/configure conftest.file`
fi
rm -f conftest.file
if test "$*" != "X $srcdir/configure conftest.file" \
@@ -1992,14 +1973,7 @@ program_transform_name=`$as_echo "$program_transform_name" | sed "$ac_script"`
# expand $ac_aux_dir to an absolute path
am_aux_dir=`cd $ac_aux_dir && pwd`
-if test x"${MISSING+set}" != xset; then
- case $am_aux_dir in
- *\ * | *\ *)
- MISSING="\${SHELL} \"$am_aux_dir/missing\"" ;;
- *)
- MISSING="\${SHELL} $am_aux_dir/missing" ;;
- esac
-fi
+test x"${MISSING+set}" = xset || MISSING="\${SHELL} $am_aux_dir/missing"
# Use eval to expand $SHELL
if eval "$MISSING --run true"; then
am_missing_run="$MISSING --run "
@@ -2009,115 +1983,6 @@ else
$as_echo "$as_me: WARNING: \`missing' script is too old or missing" >&2;}
fi
-if test x"${install_sh}" != xset; then
- case $am_aux_dir in
- *\ * | *\ *)
- install_sh="\${SHELL} '$am_aux_dir/install-sh'" ;;
- *)
- install_sh="\${SHELL} $am_aux_dir/install-sh"
- esac
-fi
-
-# Installed binaries are usually stripped using `strip' when the user
-# run `make install-strip'. However `strip' might not be the right
-# tool to use in cross-compilation environments, therefore Automake
-# will honor the `STRIP' environment variable to overrule this program.
-if test "$cross_compiling" != no; then
- if test -n "$ac_tool_prefix"; then
- # Extract the first word of "${ac_tool_prefix}strip", so it can be a program name with args.
-set dummy ${ac_tool_prefix}strip; ac_word=$2
-{ $as_echo "$as_me:$LINENO: checking for $ac_word" >&5
-$as_echo_n "checking for $ac_word... " >&6; }
-if test "${ac_cv_prog_STRIP+set}" = set; then
- $as_echo_n "(cached) " >&6
-else
- if test -n "$STRIP"; then
- ac_cv_prog_STRIP="$STRIP" # Let the user override the test.
-else
-as_save_IFS=$IFS; IFS=$PATH_SEPARATOR
-for as_dir in $PATH
-do
- IFS=$as_save_IFS
- test -z "$as_dir" && as_dir=.
- for ac_exec_ext in '' $ac_executable_extensions; do
- if { test -f "$as_dir/$ac_word$ac_exec_ext" && $as_test_x "$as_dir/$ac_word$ac_exec_ext"; }; then
- ac_cv_prog_STRIP="${ac_tool_prefix}strip"
- $as_echo "$as_me:$LINENO: found $as_dir/$ac_word$ac_exec_ext" >&5
- break 2
- fi
-done
-done
-IFS=$as_save_IFS
-
-fi
-fi
-STRIP=$ac_cv_prog_STRIP
-if test -n "$STRIP"; then
- { $as_echo "$as_me:$LINENO: result: $STRIP" >&5
-$as_echo "$STRIP" >&6; }
-else
- { $as_echo "$as_me:$LINENO: result: no" >&5
-$as_echo "no" >&6; }
-fi
-
-
-fi
-if test -z "$ac_cv_prog_STRIP"; then
- ac_ct_STRIP=$STRIP
- # Extract the first word of "strip", so it can be a program name with args.
-set dummy strip; ac_word=$2
-{ $as_echo "$as_me:$LINENO: checking for $ac_word" >&5
-$as_echo_n "checking for $ac_word... " >&6; }
-if test "${ac_cv_prog_ac_ct_STRIP+set}" = set; then
- $as_echo_n "(cached) " >&6
-else
- if test -n "$ac_ct_STRIP"; then
- ac_cv_prog_ac_ct_STRIP="$ac_ct_STRIP" # Let the user override the test.
-else
-as_save_IFS=$IFS; IFS=$PATH_SEPARATOR
-for as_dir in $PATH
-do
- IFS=$as_save_IFS
- test -z "$as_dir" && as_dir=.
- for ac_exec_ext in '' $ac_executable_extensions; do
- if { test -f "$as_dir/$ac_word$ac_exec_ext" && $as_test_x "$as_dir/$ac_word$ac_exec_ext"; }; then
- ac_cv_prog_ac_ct_STRIP="strip"
- $as_echo "$as_me:$LINENO: found $as_dir/$ac_word$ac_exec_ext" >&5
- break 2
- fi
-done
-done
-IFS=$as_save_IFS
-
-fi
-fi
-ac_ct_STRIP=$ac_cv_prog_ac_ct_STRIP
-if test -n "$ac_ct_STRIP"; then
- { $as_echo "$as_me:$LINENO: result: $ac_ct_STRIP" >&5
-$as_echo "$ac_ct_STRIP" >&6; }
-else
- { $as_echo "$as_me:$LINENO: result: no" >&5
-$as_echo "no" >&6; }
-fi
-
- if test "x$ac_ct_STRIP" = x; then
- STRIP=":"
- else
- case $cross_compiling:$ac_tool_warned in
-yes:)
-{ $as_echo "$as_me:$LINENO: WARNING: using cross tools not prefixed with host triplet" >&5
-$as_echo "$as_me: WARNING: using cross tools not prefixed with host triplet" >&2;}
-ac_tool_warned=yes ;;
-esac
- STRIP=$ac_ct_STRIP
- fi
-else
- STRIP="$ac_cv_prog_STRIP"
-fi
-
-fi
-INSTALL_STRIP_PROGRAM="\$(install_sh) -c -s"
-
{ $as_echo "$as_me:$LINENO: checking for a thread-safe mkdir -p" >&5
$as_echo_n "checking for a thread-safe mkdir -p... " >&6; }
if test -z "$MKDIR_P"; then
@@ -2300,6 +2165,108 @@ AUTOHEADER=${AUTOHEADER-"${am_missing_run}autoheader"}
MAKEINFO=${MAKEINFO-"${am_missing_run}makeinfo"}
+install_sh=${install_sh-"\$(SHELL) $am_aux_dir/install-sh"}
+
+# Installed binaries are usually stripped using `strip' when the user
+# run `make install-strip'. However `strip' might not be the right
+# tool to use in cross-compilation environments, therefore Automake
+# will honor the `STRIP' environment variable to overrule this program.
+if test "$cross_compiling" != no; then
+ if test -n "$ac_tool_prefix"; then
+ # Extract the first word of "${ac_tool_prefix}strip", so it can be a program name with args.
+set dummy ${ac_tool_prefix}strip; ac_word=$2
+{ $as_echo "$as_me:$LINENO: checking for $ac_word" >&5
+$as_echo_n "checking for $ac_word... " >&6; }
+if test "${ac_cv_prog_STRIP+set}" = set; then
+ $as_echo_n "(cached) " >&6
+else
+ if test -n "$STRIP"; then
+ ac_cv_prog_STRIP="$STRIP" # Let the user override the test.
+else
+as_save_IFS=$IFS; IFS=$PATH_SEPARATOR
+for as_dir in $PATH
+do
+ IFS=$as_save_IFS
+ test -z "$as_dir" && as_dir=.
+ for ac_exec_ext in '' $ac_executable_extensions; do
+ if { test -f "$as_dir/$ac_word$ac_exec_ext" && $as_test_x "$as_dir/$ac_word$ac_exec_ext"; }; then
+ ac_cv_prog_STRIP="${ac_tool_prefix}strip"
+ $as_echo "$as_me:$LINENO: found $as_dir/$ac_word$ac_exec_ext" >&5
+ break 2
+ fi
+done
+done
+IFS=$as_save_IFS
+
+fi
+fi
+STRIP=$ac_cv_prog_STRIP
+if test -n "$STRIP"; then
+ { $as_echo "$as_me:$LINENO: result: $STRIP" >&5
+$as_echo "$STRIP" >&6; }
+else
+ { $as_echo "$as_me:$LINENO: result: no" >&5
+$as_echo "no" >&6; }
+fi
+
+
+fi
+if test -z "$ac_cv_prog_STRIP"; then
+ ac_ct_STRIP=$STRIP
+ # Extract the first word of "strip", so it can be a program name with args.
+set dummy strip; ac_word=$2
+{ $as_echo "$as_me:$LINENO: checking for $ac_word" >&5
+$as_echo_n "checking for $ac_word... " >&6; }
+if test "${ac_cv_prog_ac_ct_STRIP+set}" = set; then
+ $as_echo_n "(cached) " >&6
+else
+ if test -n "$ac_ct_STRIP"; then
+ ac_cv_prog_ac_ct_STRIP="$ac_ct_STRIP" # Let the user override the test.
+else
+as_save_IFS=$IFS; IFS=$PATH_SEPARATOR
+for as_dir in $PATH
+do
+ IFS=$as_save_IFS
+ test -z "$as_dir" && as_dir=.
+ for ac_exec_ext in '' $ac_executable_extensions; do
+ if { test -f "$as_dir/$ac_word$ac_exec_ext" && $as_test_x "$as_dir/$ac_word$ac_exec_ext"; }; then
+ ac_cv_prog_ac_ct_STRIP="strip"
+ $as_echo "$as_me:$LINENO: found $as_dir/$ac_word$ac_exec_ext" >&5
+ break 2
+ fi
+done
+done
+IFS=$as_save_IFS
+
+fi
+fi
+ac_ct_STRIP=$ac_cv_prog_ac_ct_STRIP
+if test -n "$ac_ct_STRIP"; then
+ { $as_echo "$as_me:$LINENO: result: $ac_ct_STRIP" >&5
+$as_echo "$ac_ct_STRIP" >&6; }
+else
+ { $as_echo "$as_me:$LINENO: result: no" >&5
+$as_echo "no" >&6; }
+fi
+
+ if test "x$ac_ct_STRIP" = x; then
+ STRIP=":"
+ else
+ case $cross_compiling:$ac_tool_warned in
+yes:)
+{ $as_echo "$as_me:$LINENO: WARNING: using cross tools not prefixed with host triplet" >&5
+$as_echo "$as_me: WARNING: using cross tools not prefixed with host triplet" >&2;}
+ac_tool_warned=yes ;;
+esac
+ STRIP=$ac_ct_STRIP
+ fi
+else
+ STRIP="$ac_cv_prog_STRIP"
+fi
+
+fi
+INSTALL_STRIP_PROGRAM="\$(install_sh) -c -s"
+
# We need awk for the "check" target. The system "awk" is bad on
# some platforms.
# Always define AMTAR for backward compatibility.
@@ -2312,7 +2279,6 @@ am__tar='${AMTAR} chof - "$$tardir"'; am__untar='${AMTAR} xf -'
-
{ $as_echo "$as_me:$LINENO: checking whether to enable maintainer-specific portions of Makefiles" >&5
$as_echo_n "checking whether to enable maintainer-specific portions of Makefiles... " >&6; }
# Check whether --enable-maintainer-mode was given.
@@ -3276,7 +3242,7 @@ ac_config_commands="$ac_config_commands depfiles"
am_make=${MAKE-make}
cat > confinc << 'END'
am__doit:
- @echo this is the am__doit target
+ @echo done
.PHONY: am__doit
END
# If we don't find an include directive, just comment out the code.
@@ -3287,24 +3253,24 @@ am__quote=
_am_result=none
# First try GNU make style include.
echo "include confinc" > confmf
-# Ignore all kinds of additional output from `make'.
-case `$am_make -s -f confmf 2> /dev/null` in #(
-*the\ am__doit\ target*)
- am__include=include
- am__quote=
- _am_result=GNU
- ;;
-esac
+# We grep out `Entering directory' and `Leaving directory'
+# messages which can occur if `w' ends up in MAKEFLAGS.
+# In particular we don't look at `^make:' because GNU make might
+# be invoked under some other name (usually "gmake"), in which
+# case it prints its new name instead of `make'.
+if test "`$am_make -s -f confmf 2> /dev/null | grep -v 'ing directory'`" = "done"; then
+ am__include=include
+ am__quote=
+ _am_result=GNU
+fi
# Now try BSD make style include.
if test "$am__include" = "#"; then
echo '.include "confinc"' > confmf
- case `$am_make -s -f confmf 2> /dev/null` in #(
- *the\ am__doit\ target*)
- am__include=.include
- am__quote="\""
- _am_result=BSD
- ;;
- esac
+ if test "`$am_make -s -f confmf 2> /dev/null`" = "done"; then
+ am__include=.include
+ am__quote="\""
+ _am_result=BSD
+ fi
fi
@@ -3361,11 +3327,6 @@ else
if test "$am_compiler_list" = ""; then
am_compiler_list=`sed -n 's/^#*\([a-zA-Z0-9]*\))$/\1/p' < ./depcomp`
fi
- am__universal=false
- case " $depcc " in #(
- *\ -arch\ *\ -arch\ *) am__universal=true ;;
- esac
-
for depmode in $am_compiler_list; do
# Setup a source with many dependencies, because some compilers
# like to wrap large dependency lists on column 80 (with \), and
@@ -3383,17 +3344,7 @@ else
done
echo "${am__include} ${am__quote}sub/conftest.Po${am__quote}" > confmf
- # We check with `-c' and `-o' for the sake of the "dashmstdout"
- # mode. It turns out that the SunPro C++ compiler does not properly
- # handle `-M -o', and we need to detect this. Also, some Intel
- # versions had trouble with output in subdirs
- am__obj=sub/conftest.${OBJEXT-o}
- am__minus_obj="-o $am__obj"
case $depmode in
- gcc)
- # This depmode causes a compiler race in universal mode.
- test "$am__universal" = false || continue
- ;;
nosideeffect)
# after this tag, mechanisms are not by side-effect, so they'll
# only be used when explicitly requested
@@ -3403,23 +3354,19 @@ else
break
fi
;;
- msvisualcpp | msvcmsys)
- # This compiler won't grok `-c -o', but also, the minuso test has
- # not run yet. These depmodes are late enough in the game, and
- # so weak that their functioning should not be impacted.
- am__obj=conftest.${OBJEXT-o}
- am__minus_obj=
- ;;
none) break ;;
esac
+ # We check with `-c' and `-o' for the sake of the "dashmstdout"
+ # mode. It turns out that the SunPro C++ compiler does not properly
+ # handle `-M -o', and we need to detect this.
if depmode=$depmode \
- source=sub/conftest.c object=$am__obj \
+ source=sub/conftest.c object=sub/conftest.${OBJEXT-o} \
depfile=sub/conftest.Po tmpdepfile=sub/conftest.TPo \
- $SHELL ./depcomp $depcc -c $am__minus_obj sub/conftest.c \
+ $SHELL ./depcomp $depcc -c -o sub/conftest.${OBJEXT-o} sub/conftest.c \
>/dev/null 2>conftest.err &&
grep sub/conftst1.h sub/conftest.Po > /dev/null 2>&1 &&
grep sub/conftst6.h sub/conftest.Po > /dev/null 2>&1 &&
- grep $am__obj sub/conftest.Po > /dev/null 2>&1 &&
+ grep sub/conftest.${OBJEXT-o} sub/conftest.Po > /dev/null 2>&1 &&
${MAKE-make} -s -f confmf > /dev/null 2>&1; then
# icc doesn't choke on unknown options, it will just issue warnings
# or remarks (even with -Werror). So we grep stderr for any message
@@ -3730,14 +3677,6 @@ LIBOBJS=$ac_libobjs
LTLIBOBJS=$ac_ltlibobjs
- if test -n "$EXEEXT"; then
- am__EXEEXT_TRUE=
- am__EXEEXT_FALSE='#'
-else
- am__EXEEXT_TRUE='#'
- am__EXEEXT_FALSE=
-fi
-
if test -z "${MAINTAINER_MODE_TRUE}" && test -z "${MAINTAINER_MODE_FALSE}"; then
{ { $as_echo "$as_me:$LINENO: error: conditional \"MAINTAINER_MODE\" was never defined.
Usually this means the macro was only invoked conditionally." >&5
@@ -4727,28 +4666,27 @@ $as_echo "$as_me: executing $ac_file commands" >&6;}
case $ac_file$ac_mode in
- "depfiles":C) test x"$AMDEP_TRUE" != x"" || {
- # Autoconf 2.62 quotes --file arguments for eval, but not when files
- # are listed without --file. Let's play safe and only enable the eval
- # if we detect the quoting.
- case $CONFIG_FILES in
- *\'*) eval set x "$CONFIG_FILES" ;;
- *) set x $CONFIG_FILES ;;
- esac
- shift
- for mf
- do
- # Strip MF so we end up with the name of the file.
- mf=`echo "$mf" | sed -e 's/:.*$//'`
- # Check whether this is an Automake generated Makefile or not.
- # We used to match only the files named `Makefile.in', but
- # some people rename them; so instead we look at the file content.
- # Grep'ing the first line is not enough: some people post-process
- # each Makefile.in and add a new line on top of each file to say so.
- # Grep'ing the whole file is not good either: AIX grep has a line
- # limit of 2048, but all sed's we know have understand at least 4000.
- if sed -n 's,^#.*generated by automake.*,X,p' "$mf" | grep X >/dev/null 2>&1; then
- dirpart=`$as_dirname -- "$mf" ||
+ "depfiles":C) test x"$AMDEP_TRUE" != x"" || # Autoconf 2.62 quotes --file arguments for eval, but not when files
+# are listed without --file. Let's play safe and only enable the eval
+# if we detect the quoting.
+case $CONFIG_FILES in
+*\'*) eval set x "$CONFIG_FILES" ;;
+*) set x $CONFIG_FILES ;;
+esac
+shift
+for mf
+do
+ # Strip MF so we end up with the name of the file.
+ mf=`echo "$mf" | sed -e 's/:.*$//'`
+ # Check whether this is an Automake generated Makefile or not.
+ # We used to match only the files named `Makefile.in', but
+ # some people rename them; so instead we look at the file content.
+ # Grep'ing the first line is not enough: some people post-process
+ # each Makefile.in and add a new line on top of each file to say so.
+ # Grep'ing the whole file is not good either: AIX grep has a line
+ # limit of 2048, but all sed's we know have understand at least 4000.
+ if sed -n 's,^#.*generated by automake.*,X,p' "$mf" | grep X >/dev/null 2>&1; then
+ dirpart=`$as_dirname -- "$mf" ||
$as_expr X"$mf" : 'X\(.*[^/]\)//*[^/][^/]*/*$' \| \
X"$mf" : 'X\(//\)[^/]' \| \
X"$mf" : 'X\(//\)$' \| \
@@ -4771,28 +4709,28 @@ $as_echo X"$mf" |
q
}
s/.*/./; q'`
- else
- continue
- fi
- # Extract the definition of DEPDIR, am__include, and am__quote
- # from the Makefile without running `make'.
- DEPDIR=`sed -n 's/^DEPDIR = //p' < "$mf"`
- test -z "$DEPDIR" && continue
- am__include=`sed -n 's/^am__include = //p' < "$mf"`
- test -z "am__include" && continue
- am__quote=`sed -n 's/^am__quote = //p' < "$mf"`
- # When using ansi2knr, U may be empty or an underscore; expand it
- U=`sed -n 's/^U = //p' < "$mf"`
- # Find all dependency output files, they are included files with
- # $(DEPDIR) in their names. We invoke sed twice because it is the
- # simplest approach to changing $(DEPDIR) to its actual value in the
- # expansion.
- for file in `sed -n "
- s/^$am__include $am__quote\(.*(DEPDIR).*\)$am__quote"'$/\1/p' <"$mf" | \
- sed -e 's/\$(DEPDIR)/'"$DEPDIR"'/g' -e 's/\$U/'"$U"'/g'`; do
- # Make sure the directory exists.
- test -f "$dirpart/$file" && continue
- fdir=`$as_dirname -- "$file" ||
+ else
+ continue
+ fi
+ # Extract the definition of DEPDIR, am__include, and am__quote
+ # from the Makefile without running `make'.
+ DEPDIR=`sed -n 's/^DEPDIR = //p' < "$mf"`
+ test -z "$DEPDIR" && continue
+ am__include=`sed -n 's/^am__include = //p' < "$mf"`
+ test -z "am__include" && continue
+ am__quote=`sed -n 's/^am__quote = //p' < "$mf"`
+ # When using ansi2knr, U may be empty or an underscore; expand it
+ U=`sed -n 's/^U = //p' < "$mf"`
+ # Find all dependency output files, they are included files with
+ # $(DEPDIR) in their names. We invoke sed twice because it is the
+ # simplest approach to changing $(DEPDIR) to its actual value in the
+ # expansion.
+ for file in `sed -n "
+ s/^$am__include $am__quote\(.*(DEPDIR).*\)$am__quote"'$/\1/p' <"$mf" | \
+ sed -e 's/\$(DEPDIR)/'"$DEPDIR"'/g' -e 's/\$U/'"$U"'/g'`; do
+ # Make sure the directory exists.
+ test -f "$dirpart/$file" && continue
+ fdir=`$as_dirname -- "$file" ||
$as_expr X"$file" : 'X\(.*[^/]\)//*[^/][^/]*/*$' \| \
X"$file" : 'X\(//\)[^/]' \| \
X"$file" : 'X\(//\)$' \| \
@@ -4815,7 +4753,7 @@ $as_echo X"$file" |
q
}
s/.*/./; q'`
- { as_dir=$dirpart/$fdir
+ { as_dir=$dirpart/$fdir
case $as_dir in #(
-*) as_dir=./$as_dir;;
esac
@@ -4856,11 +4794,10 @@ $as_echo X"$as_dir" |
} || test -d "$as_dir" || { { $as_echo "$as_me:$LINENO: error: cannot create directory $as_dir" >&5
$as_echo "$as_me: error: cannot create directory $as_dir" >&2;}
{ (exit 1); exit 1; }; }; }
- # echo "creating $dirpart/$file"
- echo '# dummy' > "$dirpart/$file"
- done
+ # echo "creating $dirpart/$file"
+ echo '# dummy' > "$dirpart/$file"
done
-}
+done
;;
esac
diff --git a/Build/source/texk/texlive/linked_scripts/Makefile.in b/Build/source/texk/texlive/linked_scripts/Makefile.in
index 14f9ecf73a5..887c38bb576 100644
--- a/Build/source/texk/texlive/linked_scripts/Makefile.in
+++ b/Build/source/texk/texlive/linked_scripts/Makefile.in
@@ -1,9 +1,8 @@
-# Makefile.in generated by automake 1.11 from Makefile.am.
+# Makefile.in generated by automake 1.10.2 from Makefile.am.
# @configure_input@
# Copyright (C) 1994, 1995, 1996, 1997, 1998, 1999, 2000, 2001, 2002,
-# 2003, 2004, 2005, 2006, 2007, 2008, 2009 Free Software Foundation,
-# Inc.
+# 2003, 2004, 2005, 2006, 2007, 2008 Free Software Foundation, Inc.
# This Makefile.in is free software; the Free Software Foundation
# gives unlimited permission to copy and/or distribute it,
# with or without modifications, as long as this notice is preserved.
@@ -17,9 +16,8 @@
VPATH = @srcdir@
pkgdatadir = $(datadir)/@PACKAGE@
-pkgincludedir = $(includedir)/@PACKAGE@
pkglibdir = $(libdir)/@PACKAGE@
-pkglibexecdir = $(libexecdir)/@PACKAGE@
+pkgincludedir = $(includedir)/@PACKAGE@
am__cd = CDPATH="$${ZSH_VERSION+.}$(PATH_SEPARATOR)" && cd
install_sh_DATA = $(install_sh) -c -m 644
install_sh_PROGRAM = $(install_sh) -c
@@ -42,30 +40,17 @@ am__configure_deps = $(am__aclocal_m4_deps) $(CONFIGURE_DEPENDENCIES) \
$(ACLOCAL_M4)
mkinstalldirs = $(SHELL) $(top_srcdir)/../../build-aux/mkinstalldirs
CONFIG_CLEAN_FILES =
-CONFIG_CLEAN_VPATH_FILES =
+am__installdirs = "$(DESTDIR)$(bindir)" "$(DESTDIR)$(scriptdir)" \
+ "$(DESTDIR)$(scriptxdir)"
+binSCRIPT_INSTALL = $(INSTALL_SCRIPT)
am__vpath_adj_setup = srcdirstrip=`echo "$(srcdir)" | sed 's|.|.|g'`;
am__vpath_adj = case $$p in \
$(srcdir)/*) f=`echo "$$p" | sed "s|^$$srcdirstrip/||"`;; \
*) f=$$p;; \
esac;
-am__strip_dir = f=`echo $$p | sed -e 's|^.*/||'`;
-am__install_max = 40
-am__nobase_strip_setup = \
- srcdirstrip=`echo "$(srcdir)" | sed 's/[].[^$$\\*|]/\\\\&/g'`
-am__nobase_strip = \
- for p in $$list; do echo "$$p"; done | sed -e "s|$$srcdirstrip/||"
-am__nobase_list = $(am__nobase_strip_setup); \
- for p in $$list; do echo "$$p $$p"; done | \
- sed "s| $$srcdirstrip/| |;"' / .*\//!s/ .*/ ./; s,\( .*\)/[^/]*$$,\1,' | \
- $(AWK) 'BEGIN { files["."] = "" } { files[$$2] = files[$$2] " " $$1; \
- if (++n[$$2] == $(am__install_max)) \
- { print $$2, files[$$2]; n[$$2] = 0; files[$$2] = "" } } \
- END { for (dir in files) print dir, files[dir] }'
-am__base_list = \
- sed '$$!N;$$!N;$$!N;$$!N;$$!N;$$!N;$$!N;s/\n/ /g' | \
- sed '$$!N;$$!N;$$!N;$$!N;s/\n/ /g'
-am__installdirs = "$(DESTDIR)$(bindir)" "$(DESTDIR)$(scriptdir)" \
- "$(DESTDIR)$(scriptxdir)"
+am__strip_dir = `echo $$p | sed -e 's|^.*/||'`;
+nobase_dist_scriptSCRIPT_INSTALL = $(install_sh_SCRIPT)
+nobase_dist_scriptxSCRIPT_INSTALL = $(install_sh_SCRIPT)
SCRIPTS = $(bin_SCRIPTS) $(nobase_dist_script_SCRIPTS) \
$(nobase_dist_scriptx_SCRIPTS)
SOURCES =
@@ -245,9 +230,9 @@ $(srcdir)/Makefile.in: @MAINTAINER_MODE_TRUE@ $(srcdir)/Makefile.am $(am__confi
exit 1;; \
esac; \
done; \
- echo ' cd $(top_srcdir) && $(AUTOMAKE) --foreign linked_scripts/Makefile'; \
- $(am__cd) $(top_srcdir) && \
- $(AUTOMAKE) --foreign linked_scripts/Makefile
+ echo ' cd $(top_srcdir) && $(AUTOMAKE) --foreign linked_scripts/Makefile'; \
+ cd $(top_srcdir) && \
+ $(AUTOMAKE) --foreign linked_scripts/Makefile
.PRECIOUS: Makefile
Makefile: $(srcdir)/Makefile.in $(top_builddir)/config.status
@case '$?' in \
@@ -265,123 +250,75 @@ $(top_srcdir)/configure: @MAINTAINER_MODE_TRUE@ $(am__configure_deps)
cd $(top_builddir) && $(MAKE) $(AM_MAKEFLAGS) am--refresh
$(ACLOCAL_M4): @MAINTAINER_MODE_TRUE@ $(am__aclocal_m4_deps)
cd $(top_builddir) && $(MAKE) $(AM_MAKEFLAGS) am--refresh
-$(am__aclocal_m4_deps):
install-binSCRIPTS: $(bin_SCRIPTS)
@$(NORMAL_INSTALL)
test -z "$(bindir)" || $(MKDIR_P) "$(DESTDIR)$(bindir)"
- @list='$(bin_SCRIPTS)'; test -n "$(bindir)" || list=; \
- for p in $$list; do \
+ @list='$(bin_SCRIPTS)'; for p in $$list; do \
if test -f "$$p"; then d=; else d="$(srcdir)/"; fi; \
- if test -f "$$d$$p"; then echo "$$d$$p"; echo "$$p"; else :; fi; \
- done | \
- sed -e 'p;s,.*/,,;n' \
- -e 'h;s|.*|.|' \
- -e 'p;x;s,.*/,,;$(transform)' | sed 'N;N;N;s,\n, ,g' | \
- $(AWK) 'BEGIN { files["."] = ""; dirs["."] = 1; } \
- { d=$$3; if (dirs[d] != 1) { print "d", d; dirs[d] = 1 } \
- if ($$2 == $$4) { files[d] = files[d] " " $$1; \
- if (++n[d] == $(am__install_max)) { \
- print "f", d, files[d]; n[d] = 0; files[d] = "" } } \
- else { print "f", d "/" $$4, $$1 } } \
- END { for (d in files) print "f", d, files[d] }' | \
- while read type dir files; do \
- if test "$$dir" = .; then dir=; else dir=/$$dir; fi; \
- test -z "$$files" || { \
- echo " $(INSTALL_SCRIPT) $$files '$(DESTDIR)$(bindir)$$dir'"; \
- $(INSTALL_SCRIPT) $$files "$(DESTDIR)$(bindir)$$dir" || exit $$?; \
- } \
- ; done
+ if test -f $$d$$p; then \
+ f=`echo "$$p" | sed 's|^.*/||;$(transform)'`; \
+ echo " $(binSCRIPT_INSTALL) '$$d$$p' '$(DESTDIR)$(bindir)/$$f'"; \
+ $(binSCRIPT_INSTALL) "$$d$$p" "$(DESTDIR)$(bindir)/$$f"; \
+ else :; fi; \
+ done
uninstall-binSCRIPTS:
@$(NORMAL_UNINSTALL)
- @list='$(bin_SCRIPTS)'; test -n "$(bindir)" || exit 0; \
- files=`for p in $$list; do echo "$$p"; done | \
- sed -e 's,.*/,,;$(transform)'`; \
- test -n "$$list" || exit 0; \
- echo " ( cd '$(DESTDIR)$(bindir)' && rm -f" $$files ")"; \
- cd "$(DESTDIR)$(bindir)" && rm -f $$files
+ @list='$(bin_SCRIPTS)'; for p in $$list; do \
+ f=`echo "$$p" | sed 's|^.*/||;$(transform)'`; \
+ echo " rm -f '$(DESTDIR)$(bindir)/$$f'"; \
+ rm -f "$(DESTDIR)$(bindir)/$$f"; \
+ done
install-nobase_dist_scriptSCRIPTS: $(nobase_dist_script_SCRIPTS)
@$(NORMAL_INSTALL)
test -z "$(scriptdir)" || $(MKDIR_P) "$(DESTDIR)$(scriptdir)"
- @list='$(nobase_dist_script_SCRIPTS)'; test -n "$(scriptdir)" || list=; \
- $(am__nobase_strip_setup); \
- for p in $$list; do \
+ @$(am__vpath_adj_setup) \
+ list='$(nobase_dist_script_SCRIPTS)'; for p in $$list; do \
+ $(am__vpath_adj) p=$$f; \
if test -f "$$p"; then d=; else d="$(srcdir)/"; fi; \
- if test -f "$$d$$p"; then echo "$$d$$p"; echo "$$p"; else :; fi; \
- done | \
- sed -e 'p;s,.*/,,;n' \
- -e "s|$$srcdirstrip/||" -e 'h;s|[^/]*$$||; s|^$$|.|' \
- -e 'p;x;s,.*/,,;$(transform)' | sed 'N;N;N;s,\n, ,g' | \
- $(AWK) 'BEGIN { files["."] = ""; dirs["."] = 1; } \
- { d=$$3; if (dirs[d] != 1) { print "d", d; dirs[d] = 1 } \
- if ($$2 == $$4) { files[d] = files[d] " " $$1; \
- if (++n[d] == $(am__install_max)) { \
- print "f", d, files[d]; n[d] = 0; files[d] = "" } } \
- else { print "f", d "/" $$4, $$1 } } \
- END { for (d in files) print "f", d, files[d] }' | \
- while read type dir files; do \
- case $$type in \
- d) echo " $(MKDIR_P) '$(DESTDIR)$(scriptdir)/$$dir'"; \
- $(MKDIR_P) "$(DESTDIR)$(scriptdir)/$$dir" || exit $$?;; \
- f) \
- if test "$$dir" = .; then dir=; else dir=/$$dir; fi; \
- test -z "$$files" || { \
- echo " $(INSTALL_SCRIPT) $$files '$(DESTDIR)$(scriptdir)$$dir'"; \
- $(INSTALL_SCRIPT) $$files "$(DESTDIR)$(scriptdir)$$dir" || exit $$?; \
- } \
- ;; esac \
- ; done
+ if test -f $$d$$p; then \
+ f=`echo "$$p" | sed 's|^.*/||;$(transform)'`; \
+ f=`echo "$$p" | sed 's|[^/]*$$||'`"$$f"; \
+ echo " $(nobase_dist_scriptSCRIPT_INSTALL) '$$d$$p' '$(DESTDIR)$(scriptdir)/$$f'"; \
+ $(nobase_dist_scriptSCRIPT_INSTALL) "$$d$$p" "$(DESTDIR)$(scriptdir)/$$f"; \
+ else :; fi; \
+ done
uninstall-nobase_dist_scriptSCRIPTS:
@$(NORMAL_UNINSTALL)
- @list='$(nobase_dist_script_SCRIPTS)'; test -n "$(scriptdir)" || exit 0; \
- $(am__nobase_strip_setup); \
- files=`$(am__nobase_strip) \
- -e 'h;s,.*/,,;$(transform);x;s|[^/]*$$||;G;s,\n,,'`; \
- test -n "$$list" || exit 0; \
- echo " ( cd '$(DESTDIR)$(scriptdir)' && rm -f" $$files ")"; \
- cd "$(DESTDIR)$(scriptdir)" && rm -f $$files
+ @$(am__vpath_adj_setup) \
+ list='$(nobase_dist_script_SCRIPTS)'; for p in $$list; do \
+ $(am__vpath_adj) p=$$f; \
+ f=`echo "$$p" | sed 's|^.*/||;$(transform)'`; \
+ f=`echo "$$p" | sed 's|[^/]*$$||'`"$$f"; \
+ echo " rm -f '$(DESTDIR)$(scriptdir)/$$f'"; \
+ rm -f "$(DESTDIR)$(scriptdir)/$$f"; \
+ done
install-nobase_dist_scriptxSCRIPTS: $(nobase_dist_scriptx_SCRIPTS)
@$(NORMAL_INSTALL)
test -z "$(scriptxdir)" || $(MKDIR_P) "$(DESTDIR)$(scriptxdir)"
- @list='$(nobase_dist_scriptx_SCRIPTS)'; test -n "$(scriptxdir)" || list=; \
- $(am__nobase_strip_setup); \
- for p in $$list; do \
+ @$(am__vpath_adj_setup) \
+ list='$(nobase_dist_scriptx_SCRIPTS)'; for p in $$list; do \
+ $(am__vpath_adj) p=$$f; \
if test -f "$$p"; then d=; else d="$(srcdir)/"; fi; \
- if test -f "$$d$$p"; then echo "$$d$$p"; echo "$$p"; else :; fi; \
- done | \
- sed -e 'p;s,.*/,,;n' \
- -e "s|$$srcdirstrip/||" -e 'h;s|[^/]*$$||; s|^$$|.|' \
- -e 'p;x;s,.*/,,;$(transform)' | sed 'N;N;N;s,\n, ,g' | \
- $(AWK) 'BEGIN { files["."] = ""; dirs["."] = 1; } \
- { d=$$3; if (dirs[d] != 1) { print "d", d; dirs[d] = 1 } \
- if ($$2 == $$4) { files[d] = files[d] " " $$1; \
- if (++n[d] == $(am__install_max)) { \
- print "f", d, files[d]; n[d] = 0; files[d] = "" } } \
- else { print "f", d "/" $$4, $$1 } } \
- END { for (d in files) print "f", d, files[d] }' | \
- while read type dir files; do \
- case $$type in \
- d) echo " $(MKDIR_P) '$(DESTDIR)$(scriptxdir)/$$dir'"; \
- $(MKDIR_P) "$(DESTDIR)$(scriptxdir)/$$dir" || exit $$?;; \
- f) \
- if test "$$dir" = .; then dir=; else dir=/$$dir; fi; \
- test -z "$$files" || { \
- echo " $(INSTALL_SCRIPT) $$files '$(DESTDIR)$(scriptxdir)$$dir'"; \
- $(INSTALL_SCRIPT) $$files "$(DESTDIR)$(scriptxdir)$$dir" || exit $$?; \
- } \
- ;; esac \
- ; done
+ if test -f $$d$$p; then \
+ f=`echo "$$p" | sed 's|^.*/||;$(transform)'`; \
+ f=`echo "$$p" | sed 's|[^/]*$$||'`"$$f"; \
+ echo " $(nobase_dist_scriptxSCRIPT_INSTALL) '$$d$$p' '$(DESTDIR)$(scriptxdir)/$$f'"; \
+ $(nobase_dist_scriptxSCRIPT_INSTALL) "$$d$$p" "$(DESTDIR)$(scriptxdir)/$$f"; \
+ else :; fi; \
+ done
uninstall-nobase_dist_scriptxSCRIPTS:
@$(NORMAL_UNINSTALL)
- @list='$(nobase_dist_scriptx_SCRIPTS)'; test -n "$(scriptxdir)" || exit 0; \
- $(am__nobase_strip_setup); \
- files=`$(am__nobase_strip) \
- -e 'h;s,.*/,,;$(transform);x;s|[^/]*$$||;G;s,\n,,'`; \
- test -n "$$list" || exit 0; \
- echo " ( cd '$(DESTDIR)$(scriptxdir)' && rm -f" $$files ")"; \
- cd "$(DESTDIR)$(scriptxdir)" && rm -f $$files
+ @$(am__vpath_adj_setup) \
+ list='$(nobase_dist_scriptx_SCRIPTS)'; for p in $$list; do \
+ $(am__vpath_adj) p=$$f; \
+ f=`echo "$$p" | sed 's|^.*/||;$(transform)'`; \
+ f=`echo "$$p" | sed 's|[^/]*$$||'`"$$f"; \
+ echo " rm -f '$(DESTDIR)$(scriptxdir)/$$f'"; \
+ rm -f "$(DESTDIR)$(scriptxdir)/$$f"; \
+ done
tags: TAGS
TAGS:
@@ -405,17 +342,13 @@ distdir: $(DISTFILES)
if test -f $$file || test -d $$file; then d=.; else d=$(srcdir); fi; \
if test -d $$d/$$file; then \
dir=`echo "/$$file" | sed -e 's,/[^/]*$$,,'`; \
- if test -d "$(distdir)/$$file"; then \
- find "$(distdir)/$$file" -type d ! -perm -700 -exec chmod u+rwx {} \;; \
- fi; \
if test -d $(srcdir)/$$file && test $$d != $(srcdir); then \
- cp -fpR $(srcdir)/$$file "$(distdir)$$dir" || exit 1; \
- find "$(distdir)/$$file" -type d ! -perm -700 -exec chmod u+rwx {} \;; \
+ cp -pR $(srcdir)/$$file $(distdir)$$dir || exit 1; \
fi; \
- cp -fpR $$d/$$file "$(distdir)$$dir" || exit 1; \
+ cp -pR $$d/$$file $(distdir)$$dir || exit 1; \
else \
- test -f "$(distdir)/$$file" \
- || cp -p $$d/$$file "$(distdir)/$$file" \
+ test -f $(distdir)/$$file \
+ || cp -p $$d/$$file $(distdir)/$$file \
|| exit 1; \
fi; \
done
@@ -446,7 +379,6 @@ clean-generic:
distclean-generic:
-test -z "$(CONFIG_CLEAN_FILES)" || rm -f $(CONFIG_CLEAN_FILES)
- -test . = "$(srcdir)" || test -z "$(CONFIG_CLEAN_VPATH_FILES)" || rm -f $(CONFIG_CLEAN_VPATH_FILES)
maintainer-clean-generic:
@echo "This command is intended for maintainers to use"
@@ -465,8 +397,6 @@ dvi-am:
html: html-am
-html-am:
-
info: info-am
info-am:
@@ -475,30 +405,21 @@ install-data-am: install-nobase_dist_scriptSCRIPTS \
install-nobase_dist_scriptxSCRIPTS
@$(NORMAL_INSTALL)
$(MAKE) $(AM_MAKEFLAGS) install-data-hook
-install-dvi: install-dvi-am
-install-dvi-am:
+install-dvi: install-dvi-am
install-exec-am: install-binSCRIPTS
install-html: install-html-am
-install-html-am:
-
install-info: install-info-am
-install-info-am:
-
install-man:
install-pdf: install-pdf-am
-install-pdf-am:
-
install-ps: install-ps-am
-install-ps-am:
-
installcheck-am:
maintainer-clean: maintainer-clean-am
@@ -521,6 +442,7 @@ uninstall-am: uninstall-binSCRIPTS uninstall-nobase_dist_scriptSCRIPTS \
uninstall-nobase_dist_scriptxSCRIPTS
@$(NORMAL_INSTALL)
$(MAKE) $(AM_MAKEFLAGS) uninstall-hook
+
.MAKE: install-am install-data-am install-strip uninstall-am
.PHONY: all all-am check check-am clean clean-generic distclean \
@@ -578,7 +500,6 @@ uninstall-hook:
rm -f $(DESTDIR)$(bindir)/$$target; \
done
rm -f $(DESTDIR)$(bindir)/getnonfreefonts-sys $(DESTDIR)$(bindir)/man
-
# Tell versions [3.59,3.63) of GNU make to not export all variables.
# Otherwise a system limit (for SysV at least) may be exceeded.
.NOEXPORT:
diff --git a/Build/source/texk/ttf2pk/Makefile.in b/Build/source/texk/ttf2pk/Makefile.in
index 53637f15c30..911184bcf07 100644
--- a/Build/source/texk/ttf2pk/Makefile.in
+++ b/Build/source/texk/ttf2pk/Makefile.in
@@ -40,13 +40,15 @@ DIST_COMMON = README $(am__configure_deps) $(dist_man1_MANS) \
$(srcdir)/../../build-aux/depcomp \
$(srcdir)/../../build-aux/install-sh \
$(srcdir)/../../build-aux/ltmain.sh \
- $(srcdir)/../../build-aux/missing $(srcdir)/Makefile.am \
+ $(srcdir)/../../build-aux/missing \
+ $(srcdir)/../../build-aux/mkinstalldirs $(srcdir)/Makefile.am \
$(srcdir)/Makefile.in $(srcdir)/c-auto.in \
$(top_srcdir)/configure ../../build-aux/config.guess \
../../build-aux/config.sub ../../build-aux/depcomp \
../../build-aux/install-sh ../../build-aux/ltmain.sh \
- ../../build-aux/missing ../../build-aux/texinfo.tex \
- ../../build-aux/ylwrap ChangeLog TODO
+ ../../build-aux/missing ../../build-aux/mkinstalldirs \
+ ../../build-aux/texinfo.tex ../../build-aux/ylwrap ChangeLog \
+ TODO
ACLOCAL_M4 = $(top_srcdir)/aclocal.m4
am__aclocal_m4_deps = $(top_srcdir)/../../m4/kpse-common.m4 \
$(top_srcdir)/../../m4/kpse-freetype-flags.m4 \
@@ -61,7 +63,7 @@ am__configure_deps = $(am__aclocal_m4_deps) $(CONFIGURE_DEPENDENCIES) \
$(ACLOCAL_M4)
am__CONFIG_DISTCLEAN_FILES = config.status config.cache config.log \
configure.lineno config.status.lineno
-mkinstalldirs = $(install_sh) -d
+mkinstalldirs = $(SHELL) $(top_srcdir)/../../build-aux/mkinstalldirs
CONFIG_HEADER = c-auto.h
CONFIG_CLEAN_FILES =
am__installdirs = "$(DESTDIR)$(bindir)" "$(DESTDIR)$(man1dir)"
diff --git a/Build/source/texk/ttfdump/Makefile.in b/Build/source/texk/ttfdump/Makefile.in
index d027a5cb0cd..469d2f673fc 100644
--- a/Build/source/texk/ttfdump/Makefile.in
+++ b/Build/source/texk/ttfdump/Makefile.in
@@ -41,13 +41,15 @@ DIST_COMMON = README $(am__configure_deps) \
$(srcdir)/../../build-aux/depcomp \
$(srcdir)/../../build-aux/install-sh \
$(srcdir)/../../build-aux/ltmain.sh \
- $(srcdir)/../../build-aux/missing $(srcdir)/Makefile.am \
+ $(srcdir)/../../build-aux/missing \
+ $(srcdir)/../../build-aux/mkinstalldirs $(srcdir)/Makefile.am \
$(srcdir)/Makefile.in $(srcdir)/config.h.in \
$(top_srcdir)/configure ../../build-aux/config.guess \
../../build-aux/config.sub ../../build-aux/depcomp \
../../build-aux/install-sh ../../build-aux/ltmain.sh \
- ../../build-aux/missing ../../build-aux/texinfo.tex \
- ../../build-aux/ylwrap COPYING ChangeLog INSTALL TODO
+ ../../build-aux/missing ../../build-aux/mkinstalldirs \
+ ../../build-aux/texinfo.tex ../../build-aux/ylwrap COPYING \
+ ChangeLog INSTALL TODO
ACLOCAL_M4 = $(top_srcdir)/aclocal.m4
am__aclocal_m4_deps = $(top_srcdir)/../../m4/kpse-common.m4 \
$(top_srcdir)/../../m4/kpse-kpathsea-flags.m4 \
@@ -61,7 +63,7 @@ am__configure_deps = $(am__aclocal_m4_deps) $(CONFIGURE_DEPENDENCIES) \
$(ACLOCAL_M4)
am__CONFIG_DISTCLEAN_FILES = config.status config.cache config.log \
configure.lineno config.status.lineno
-mkinstalldirs = $(install_sh) -d
+mkinstalldirs = $(SHELL) $(top_srcdir)/../../build-aux/mkinstalldirs
CONFIG_HEADER = config.h
CONFIG_CLEAN_FILES =
LIBRARIES = $(noinst_LIBRARIES)
diff --git a/Build/source/texk/web2c/Makefile.in b/Build/source/texk/web2c/Makefile.in
index 07f17469c9c..769c9ce3a11 100644
--- a/Build/source/texk/web2c/Makefile.in
+++ b/Build/source/texk/web2c/Makefile.in
@@ -57,7 +57,8 @@ DIST_COMMON = README $(am__configure_deps) $(dist_man_MANS) \
$(srcdir)/../../build-aux/depcomp \
$(srcdir)/../../build-aux/install-sh \
$(srcdir)/../../build-aux/ltmain.sh \
- $(srcdir)/../../build-aux/missing $(srcdir)/Makefile.am \
+ $(srcdir)/../../build-aux/missing \
+ $(srcdir)/../../build-aux/mkinstalldirs $(srcdir)/Makefile.am \
$(srcdir)/Makefile.in $(srcdir)/README \
$(srcdir)/alephdir/am/aleph.am $(srcdir)/am/bootstrap.am \
$(srcdir)/am/cweb.am $(srcdir)/am/texmf.am $(srcdir)/am/web.am \
@@ -83,8 +84,8 @@ DIST_COMMON = README $(am__configure_deps) $(dist_man_MANS) \
../../build-aux/config.guess ../../build-aux/config.sub \
../../build-aux/depcomp ../../build-aux/install-sh \
../../build-aux/ltmain.sh ../../build-aux/missing \
- ../../build-aux/texinfo.tex ../../build-aux/ylwrap AUTHORS \
- ChangeLog INSTALL NEWS
+ ../../build-aux/mkinstalldirs ../../build-aux/texinfo.tex \
+ ../../build-aux/ylwrap AUTHORS ChangeLog INSTALL NEWS
@WEB_TRUE@am__append_2 = $(web_programs)
@WEB_TRUE@am__append_3 = $(web_tests)
@TEX_TRUE@am__append_4 = tex
@@ -197,7 +198,7 @@ am__configure_deps = $(am__aclocal_m4_deps) $(CONFIGURE_DEPENDENCIES) \
$(ACLOCAL_M4)
am__CONFIG_DISTCLEAN_FILES = config.status config.cache config.log \
configure.lineno config.status.lineno
-mkinstalldirs = $(install_sh) -d
+mkinstalldirs = $(SHELL) $(top_srcdir)/../../build-aux/mkinstalldirs
CONFIG_HEADER = c-auto.h ff-config.h
CONFIG_CLEAN_FILES = CXXLD.sh
ARFLAGS = cru
@@ -1073,8 +1074,7 @@ EXTRA_DIST = PROJECTS cftests config.h cpascal.h help.h tangle.web \
luatexdir/zziplib/configure.ac luatexdir/zziplib/docs \
luatexdir/zziplib/m4 luatexdir/zziplib/msvc6 \
luatexdir/zziplib/msvc7 luatexdir/zziplib/msvc8 \
- luatexdir/zziplib/test luatexdir/zziplib/uses \
- luatexdir/zziplib/zzip/Makefile \
+ luatexdir/zziplib/test luatexdir/zziplib/zzip/Makefile \
luatexdir/zziplib/zzip/Makefile.am \
luatexdir/zziplib/zzip/Makefile.in \
luatexdir/zziplib/zzip/_msvc.h \
diff --git a/Build/source/texk/web2c/ac/withenable.ac b/Build/source/texk/web2c/ac/withenable.ac
index 42e6b71eedc..67667f016a5 100644
--- a/Build/source/texk/web2c/ac/withenable.ac
+++ b/Build/source/texk/web2c/ac/withenable.ac
@@ -3,6 +3,8 @@ dnl
dnl Copyright (C) 2009 Peter Breitenlohner <tex-live@tug.org>
dnl You may freely use, modify and/or distribute this file.
dnl
+dnl extra_dirs = texk/web2c/web2c
+dnl
## configure options and TL libraries required for web2c
KPSE_ENABLE_PROG([web2c], [kpathsea zlib], , [TeX & Co.])
m4_include(kpse_TL[texk/web2c/ac/web2c.ac])
diff --git a/Build/source/texk/web2c/doc/Makefile.in b/Build/source/texk/web2c/doc/Makefile.in
index b3f1ea140ab..1ac869d6e4b 100644
--- a/Build/source/texk/web2c/doc/Makefile.in
+++ b/Build/source/texk/web2c/doc/Makefile.in
@@ -62,7 +62,7 @@ am__aclocal_m4_deps = $(top_srcdir)/../../m4/kpse-asm.m4 \
$(top_srcdir)/ac/web2c.ac $(top_srcdir)/configure.ac
am__configure_deps = $(am__aclocal_m4_deps) $(CONFIGURE_DEPENDENCIES) \
$(ACLOCAL_M4)
-mkinstalldirs = $(install_sh) -d
+mkinstalldirs = $(SHELL) $(top_srcdir)/../../build-aux/mkinstalldirs
CONFIG_HEADER = $(top_builddir)/c-auto.h $(top_builddir)/ff-config.h
CONFIG_CLEAN_FILES =
SOURCES =
diff --git a/Build/source/texk/web2c/lib/Makefile.in b/Build/source/texk/web2c/lib/Makefile.in
index d0925ce3fd3..0230211a757 100644
--- a/Build/source/texk/web2c/lib/Makefile.in
+++ b/Build/source/texk/web2c/lib/Makefile.in
@@ -63,7 +63,7 @@ am__aclocal_m4_deps = $(top_srcdir)/../../m4/kpse-asm.m4 \
$(top_srcdir)/ac/web2c.ac $(top_srcdir)/configure.ac
am__configure_deps = $(am__aclocal_m4_deps) $(CONFIGURE_DEPENDENCIES) \
$(ACLOCAL_M4)
-mkinstalldirs = $(install_sh) -d
+mkinstalldirs = $(SHELL) $(top_srcdir)/../../build-aux/mkinstalldirs
CONFIG_HEADER = $(top_builddir)/c-auto.h $(top_builddir)/ff-config.h
CONFIG_CLEAN_FILES =
LIBRARIES = $(noinst_LIBRARIES)
diff --git a/Build/source/texk/web2c/luatexdir/am/libzzip.am b/Build/source/texk/web2c/luatexdir/am/libzzip.am
index d287f2ccc54..2b7a5579aac 100644
--- a/Build/source/texk/web2c/luatexdir/am/libzzip.am
+++ b/Build/source/texk/web2c/luatexdir/am/libzzip.am
@@ -71,7 +71,6 @@ EXTRA_DIST += \
luatexdir/zziplib/msvc7 \
luatexdir/zziplib/msvc8 \
luatexdir/zziplib/test \
- luatexdir/zziplib/uses \
luatexdir/zziplib/zzip/Makefile \
luatexdir/zziplib/zzip/Makefile.am \
luatexdir/zziplib/zzip/Makefile.in \
diff --git a/Build/source/texk/web2c/luatexdir/zziplib/uses/config.guess b/Build/source/texk/web2c/luatexdir/zziplib/uses/config.guess
deleted file mode 100755
index da833146088..00000000000
--- a/Build/source/texk/web2c/luatexdir/zziplib/uses/config.guess
+++ /dev/null
@@ -1,1561 +0,0 @@
-#! /bin/sh
-# Attempt to guess a canonical system name.
-# Copyright (C) 1992, 1993, 1994, 1995, 1996, 1997, 1998, 1999,
-# 2000, 2001, 2002, 2003, 2004, 2005, 2006, 2007, 2008
-# Free Software Foundation, Inc.
-
-timestamp='2009-04-27'
-
-# This file is free software; you can redistribute it and/or modify it
-# under the terms of the GNU General Public License as published by
-# the Free Software Foundation; either version 2 of the License, or
-# (at your option) any later version.
-#
-# This program is distributed in the hope that it will be useful, but
-# WITHOUT ANY WARRANTY; without even the implied warranty of
-# MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the GNU
-# General Public License for more details.
-#
-# You should have received a copy of the GNU General Public License
-# along with this program; if not, write to the Free Software
-# Foundation, Inc., 51 Franklin Street - Fifth Floor, Boston, MA
-# 02110-1301, USA.
-#
-# As a special exception to the GNU General Public License, if you
-# distribute this file as part of a program that contains a
-# configuration script generated by Autoconf, you may include it under
-# the same distribution terms that you use for the rest of that program.
-
-
-# Originally written by Per Bothner <per@bothner.com>.
-# Please send patches to <config-patches@gnu.org>. Submit a context
-# diff and a properly formatted ChangeLog entry.
-#
-# This script attempts to guess a canonical system name similar to
-# config.sub. If it succeeds, it prints the system name on stdout, and
-# exits with 0. Otherwise, it exits with 1.
-#
-# The plan is that this can be called by configure scripts if you
-# don't specify an explicit build system type.
-
-me=`echo "$0" | sed -e 's,.*/,,'`
-
-usage="\
-Usage: $0 [OPTION]
-
-Output the configuration name of the system \`$me' is run on.
-
-Operation modes:
- -h, --help print this help, then exit
- -t, --time-stamp print date of last modification, then exit
- -v, --version print version number, then exit
-
-Report bugs and patches to <config-patches@gnu.org>."
-
-version="\
-GNU config.guess ($timestamp)
-
-Originally written by Per Bothner.
-Copyright (C) 1992, 1993, 1994, 1995, 1996, 1997, 1998, 1999, 2000, 2001,
-2002, 2003, 2004, 2005, 2006, 2007, 2008 Free Software Foundation, Inc.
-
-This is free software; see the source for copying conditions. There is NO
-warranty; not even for MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE."
-
-help="
-Try \`$me --help' for more information."
-
-# Parse command line
-while test $# -gt 0 ; do
- case $1 in
- --time-stamp | --time* | -t )
- echo "$timestamp" ; exit ;;
- --version | -v )
- echo "$version" ; exit ;;
- --help | --h* | -h )
- echo "$usage"; exit ;;
- -- ) # Stop option processing
- shift; break ;;
- - ) # Use stdin as input.
- break ;;
- -* )
- echo "$me: invalid option $1$help" >&2
- exit 1 ;;
- * )
- break ;;
- esac
-done
-
-if test $# != 0; then
- echo "$me: too many arguments$help" >&2
- exit 1
-fi
-
-trap 'exit 1' 1 2 15
-
-# CC_FOR_BUILD -- compiler used by this script. Note that the use of a
-# compiler to aid in system detection is discouraged as it requires
-# temporary files to be created and, as you can see below, it is a
-# headache to deal with in a portable fashion.
-
-# Historically, `CC_FOR_BUILD' used to be named `HOST_CC'. We still
-# use `HOST_CC' if defined, but it is deprecated.
-
-# Portable tmp directory creation inspired by the Autoconf team.
-
-set_cc_for_build='
-trap "exitcode=\$?; (rm -f \$tmpfiles 2>/dev/null; rmdir \$tmp 2>/dev/null) && exit \$exitcode" 0 ;
-trap "rm -f \$tmpfiles 2>/dev/null; rmdir \$tmp 2>/dev/null; exit 1" 1 2 13 15 ;
-: ${TMPDIR=/tmp} ;
- { tmp=`(umask 077 && mktemp -d "$TMPDIR/cgXXXXXX") 2>/dev/null` && test -n "$tmp" && test -d "$tmp" ; } ||
- { test -n "$RANDOM" && tmp=$TMPDIR/cg$$-$RANDOM && (umask 077 && mkdir $tmp) ; } ||
- { tmp=$TMPDIR/cg-$$ && (umask 077 && mkdir $tmp) && echo "Warning: creating insecure temp directory" >&2 ; } ||
- { echo "$me: cannot create a temporary directory in $TMPDIR" >&2 ; exit 1 ; } ;
-dummy=$tmp/dummy ;
-tmpfiles="$dummy.c $dummy.o $dummy.rel $dummy" ;
-case $CC_FOR_BUILD,$HOST_CC,$CC in
- ,,) echo "int x;" > $dummy.c ;
- for c in cc gcc c89 c99 ; do
- if ($c -c -o $dummy.o $dummy.c) >/dev/null 2>&1 ; then
- CC_FOR_BUILD="$c"; break ;
- fi ;
- done ;
- if test x"$CC_FOR_BUILD" = x ; then
- CC_FOR_BUILD=no_compiler_found ;
- fi
- ;;
- ,,*) CC_FOR_BUILD=$CC ;;
- ,*,*) CC_FOR_BUILD=$HOST_CC ;;
-esac ; set_cc_for_build= ;'
-
-# This is needed to find uname on a Pyramid OSx when run in the BSD universe.
-# (ghazi@noc.rutgers.edu 1994-08-24)
-if (test -f /.attbin/uname) >/dev/null 2>&1 ; then
- PATH=$PATH:/.attbin ; export PATH
-fi
-
-UNAME_MACHINE=`(uname -m) 2>/dev/null` || UNAME_MACHINE=unknown
-UNAME_RELEASE=`(uname -r) 2>/dev/null` || UNAME_RELEASE=unknown
-UNAME_SYSTEM=`(uname -s) 2>/dev/null` || UNAME_SYSTEM=unknown
-UNAME_VERSION=`(uname -v) 2>/dev/null` || UNAME_VERSION=unknown
-
-# Note: order is significant - the case branches are not exclusive.
-
-case "${UNAME_MACHINE}:${UNAME_SYSTEM}:${UNAME_RELEASE}:${UNAME_VERSION}" in
- *:NetBSD:*:*)
- # NetBSD (nbsd) targets should (where applicable) match one or
- # more of the tupples: *-*-netbsdelf*, *-*-netbsdaout*,
- # *-*-netbsdecoff* and *-*-netbsd*. For targets that recently
- # switched to ELF, *-*-netbsd* would select the old
- # object file format. This provides both forward
- # compatibility and a consistent mechanism for selecting the
- # object file format.
- #
- # Note: NetBSD doesn't particularly care about the vendor
- # portion of the name. We always set it to "unknown".
- sysctl="sysctl -n hw.machine_arch"
- UNAME_MACHINE_ARCH=`(/sbin/$sysctl 2>/dev/null || \
- /usr/sbin/$sysctl 2>/dev/null || echo unknown)`
- case "${UNAME_MACHINE_ARCH}" in
- armeb) machine=armeb-unknown ;;
- arm*) machine=arm-unknown ;;
- sh3el) machine=shl-unknown ;;
- sh3eb) machine=sh-unknown ;;
- sh5el) machine=sh5le-unknown ;;
- *) machine=${UNAME_MACHINE_ARCH}-unknown ;;
- esac
- # The Operating System including object format, if it has switched
- # to ELF recently, or will in the future.
- case "${UNAME_MACHINE_ARCH}" in
- arm*|i386|m68k|ns32k|sh3*|sparc|vax)
- eval $set_cc_for_build
- if echo __ELF__ | $CC_FOR_BUILD -E - 2>/dev/null \
- | grep __ELF__ >/dev/null
- then
- # Once all utilities can be ECOFF (netbsdecoff) or a.out (netbsdaout).
- # Return netbsd for either. FIX?
- os=netbsd
- else
- os=netbsdelf
- fi
- ;;
- *)
- os=netbsd
- ;;
- esac
- # The OS release
- # Debian GNU/NetBSD machines have a different userland, and
- # thus, need a distinct triplet. However, they do not need
- # kernel version information, so it can be replaced with a
- # suitable tag, in the style of linux-gnu.
- case "${UNAME_VERSION}" in
- Debian*)
- release='-gnu'
- ;;
- *)
- release=`echo ${UNAME_RELEASE}|sed -e 's/[-_].*/\./'`
- ;;
- esac
- # Since CPU_TYPE-MANUFACTURER-KERNEL-OPERATING_SYSTEM:
- # contains redundant information, the shorter form:
- # CPU_TYPE-MANUFACTURER-OPERATING_SYSTEM is used.
- echo "${machine}-${os}${release}"
- exit ;;
- *:OpenBSD:*:*)
- UNAME_MACHINE_ARCH=`arch | sed 's/OpenBSD.//'`
- echo ${UNAME_MACHINE_ARCH}-unknown-openbsd${UNAME_RELEASE}
- exit ;;
- *:ekkoBSD:*:*)
- echo ${UNAME_MACHINE}-unknown-ekkobsd${UNAME_RELEASE}
- exit ;;
- *:SolidBSD:*:*)
- echo ${UNAME_MACHINE}-unknown-solidbsd${UNAME_RELEASE}
- exit ;;
- macppc:MirBSD:*:*)
- echo powerpc-unknown-mirbsd${UNAME_RELEASE}
- exit ;;
- *:MirBSD:*:*)
- echo ${UNAME_MACHINE}-unknown-mirbsd${UNAME_RELEASE}
- exit ;;
- alpha:OSF1:*:*)
- case $UNAME_RELEASE in
- *4.0)
- UNAME_RELEASE=`/usr/sbin/sizer -v | awk '{print $3}'`
- ;;
- *5.*)
- UNAME_RELEASE=`/usr/sbin/sizer -v | awk '{print $4}'`
- ;;
- esac
- # According to Compaq, /usr/sbin/psrinfo has been available on
- # OSF/1 and Tru64 systems produced since 1995. I hope that
- # covers most systems running today. This code pipes the CPU
- # types through head -n 1, so we only detect the type of CPU 0.
- ALPHA_CPU_TYPE=`/usr/sbin/psrinfo -v | sed -n -e 's/^ The alpha \(.*\) processor.*$/\1/p' | head -n 1`
- case "$ALPHA_CPU_TYPE" in
- "EV4 (21064)")
- UNAME_MACHINE="alpha" ;;
- "EV4.5 (21064)")
- UNAME_MACHINE="alpha" ;;
- "LCA4 (21066/21068)")
- UNAME_MACHINE="alpha" ;;
- "EV5 (21164)")
- UNAME_MACHINE="alphaev5" ;;
- "EV5.6 (21164A)")
- UNAME_MACHINE="alphaev56" ;;
- "EV5.6 (21164PC)")
- UNAME_MACHINE="alphapca56" ;;
- "EV5.7 (21164PC)")
- UNAME_MACHINE="alphapca57" ;;
- "EV6 (21264)")
- UNAME_MACHINE="alphaev6" ;;
- "EV6.7 (21264A)")
- UNAME_MACHINE="alphaev67" ;;
- "EV6.8CB (21264C)")
- UNAME_MACHINE="alphaev68" ;;
- "EV6.8AL (21264B)")
- UNAME_MACHINE="alphaev68" ;;
- "EV6.8CX (21264D)")
- UNAME_MACHINE="alphaev68" ;;
- "EV6.9A (21264/EV69A)")
- UNAME_MACHINE="alphaev69" ;;
- "EV7 (21364)")
- UNAME_MACHINE="alphaev7" ;;
- "EV7.9 (21364A)")
- UNAME_MACHINE="alphaev79" ;;
- esac
- # A Pn.n version is a patched version.
- # A Vn.n version is a released version.
- # A Tn.n version is a released field test version.
- # A Xn.n version is an unreleased experimental baselevel.
- # 1.2 uses "1.2" for uname -r.
- echo ${UNAME_MACHINE}-dec-osf`echo ${UNAME_RELEASE} | sed -e 's/^[PVTX]//' | tr 'ABCDEFGHIJKLMNOPQRSTUVWXYZ' 'abcdefghijklmnopqrstuvwxyz'`
- exit ;;
- Alpha\ *:Windows_NT*:*)
- # How do we know it's Interix rather than the generic POSIX subsystem?
- # Should we change UNAME_MACHINE based on the output of uname instead
- # of the specific Alpha model?
- echo alpha-pc-interix
- exit ;;
- 21064:Windows_NT:50:3)
- echo alpha-dec-winnt3.5
- exit ;;
- Amiga*:UNIX_System_V:4.0:*)
- echo m68k-unknown-sysv4
- exit ;;
- *:[Aa]miga[Oo][Ss]:*:*)
- echo ${UNAME_MACHINE}-unknown-amigaos
- exit ;;
- *:[Mm]orph[Oo][Ss]:*:*)
- echo ${UNAME_MACHINE}-unknown-morphos
- exit ;;
- *:OS/390:*:*)
- echo i370-ibm-openedition
- exit ;;
- *:z/VM:*:*)
- echo s390-ibm-zvmoe
- exit ;;
- *:OS400:*:*)
- echo powerpc-ibm-os400
- exit ;;
- arm:RISC*:1.[012]*:*|arm:riscix:1.[012]*:*)
- echo arm-acorn-riscix${UNAME_RELEASE}
- exit ;;
- arm:riscos:*:*|arm:RISCOS:*:*)
- echo arm-unknown-riscos
- exit ;;
- SR2?01:HI-UX/MPP:*:* | SR8000:HI-UX/MPP:*:*)
- echo hppa1.1-hitachi-hiuxmpp
- exit ;;
- Pyramid*:OSx*:*:* | MIS*:OSx*:*:* | MIS*:SMP_DC-OSx*:*:*)
- # akee@wpdis03.wpafb.af.mil (Earle F. Ake) contributed MIS and NILE.
- if test "`(/bin/universe) 2>/dev/null`" = att ; then
- echo pyramid-pyramid-sysv3
- else
- echo pyramid-pyramid-bsd
- fi
- exit ;;
- NILE*:*:*:dcosx)
- echo pyramid-pyramid-svr4
- exit ;;
- DRS?6000:unix:4.0:6*)
- echo sparc-icl-nx6
- exit ;;
- DRS?6000:UNIX_SV:4.2*:7* | DRS?6000:isis:4.2*:7*)
- case `/usr/bin/uname -p` in
- sparc) echo sparc-icl-nx7; exit ;;
- esac ;;
- s390x:SunOS:*:*)
- echo ${UNAME_MACHINE}-ibm-solaris2`echo ${UNAME_RELEASE}|sed -e 's/[^.]*//'`
- exit ;;
- sun4H:SunOS:5.*:*)
- echo sparc-hal-solaris2`echo ${UNAME_RELEASE}|sed -e 's/[^.]*//'`
- exit ;;
- sun4*:SunOS:5.*:* | tadpole*:SunOS:5.*:*)
- echo sparc-sun-solaris2`echo ${UNAME_RELEASE}|sed -e 's/[^.]*//'`
- exit ;;
- i86pc:SunOS:5.*:* | i86xen:SunOS:5.*:*)
- eval $set_cc_for_build
- SUN_ARCH="i386"
- # If there is a compiler, see if it is configured for 64-bit objects.
- # Note that the Sun cc does not turn __LP64__ into 1 like gcc does.
- # This test works for both compilers.
- if [ "$CC_FOR_BUILD" != 'no_compiler_found' ]; then
- if (echo '#ifdef __amd64'; echo IS_64BIT_ARCH; echo '#endif') | \
- (CCOPTS= $CC_FOR_BUILD -E - 2>/dev/null) | \
- grep IS_64BIT_ARCH >/dev/null
- then
- SUN_ARCH="x86_64"
- fi
- fi
- echo ${SUN_ARCH}-pc-solaris2`echo ${UNAME_RELEASE}|sed -e 's/[^.]*//'`
- exit ;;
- sun4*:SunOS:6*:*)
- # According to config.sub, this is the proper way to canonicalize
- # SunOS6. Hard to guess exactly what SunOS6 will be like, but
- # it's likely to be more like Solaris than SunOS4.
- echo sparc-sun-solaris3`echo ${UNAME_RELEASE}|sed -e 's/[^.]*//'`
- exit ;;
- sun4*:SunOS:*:*)
- case "`/usr/bin/arch -k`" in
- Series*|S4*)
- UNAME_RELEASE=`uname -v`
- ;;
- esac
- # Japanese Language versions have a version number like `4.1.3-JL'.
- echo sparc-sun-sunos`echo ${UNAME_RELEASE}|sed -e 's/-/_/'`
- exit ;;
- sun3*:SunOS:*:*)
- echo m68k-sun-sunos${UNAME_RELEASE}
- exit ;;
- sun*:*:4.2BSD:*)
- UNAME_RELEASE=`(sed 1q /etc/motd | awk '{print substr($5,1,3)}') 2>/dev/null`
- test "x${UNAME_RELEASE}" = "x" && UNAME_RELEASE=3
- case "`/bin/arch`" in
- sun3)
- echo m68k-sun-sunos${UNAME_RELEASE}
- ;;
- sun4)
- echo sparc-sun-sunos${UNAME_RELEASE}
- ;;
- esac
- exit ;;
- aushp:SunOS:*:*)
- echo sparc-auspex-sunos${UNAME_RELEASE}
- exit ;;
- # The situation for MiNT is a little confusing. The machine name
- # can be virtually everything (everything which is not
- # "atarist" or "atariste" at least should have a processor
- # > m68000). The system name ranges from "MiNT" over "FreeMiNT"
- # to the lowercase version "mint" (or "freemint"). Finally
- # the system name "TOS" denotes a system which is actually not
- # MiNT. But MiNT is downward compatible to TOS, so this should
- # be no problem.
- atarist[e]:*MiNT:*:* | atarist[e]:*mint:*:* | atarist[e]:*TOS:*:*)
- echo m68k-atari-mint${UNAME_RELEASE}
- exit ;;
- atari*:*MiNT:*:* | atari*:*mint:*:* | atarist[e]:*TOS:*:*)
- echo m68k-atari-mint${UNAME_RELEASE}
- exit ;;
- *falcon*:*MiNT:*:* | *falcon*:*mint:*:* | *falcon*:*TOS:*:*)
- echo m68k-atari-mint${UNAME_RELEASE}
- exit ;;
- milan*:*MiNT:*:* | milan*:*mint:*:* | *milan*:*TOS:*:*)
- echo m68k-milan-mint${UNAME_RELEASE}
- exit ;;
- hades*:*MiNT:*:* | hades*:*mint:*:* | *hades*:*TOS:*:*)
- echo m68k-hades-mint${UNAME_RELEASE}
- exit ;;
- *:*MiNT:*:* | *:*mint:*:* | *:*TOS:*:*)
- echo m68k-unknown-mint${UNAME_RELEASE}
- exit ;;
- m68k:machten:*:*)
- echo m68k-apple-machten${UNAME_RELEASE}
- exit ;;
- powerpc:machten:*:*)
- echo powerpc-apple-machten${UNAME_RELEASE}
- exit ;;
- RISC*:Mach:*:*)
- echo mips-dec-mach_bsd4.3
- exit ;;
- RISC*:ULTRIX:*:*)
- echo mips-dec-ultrix${UNAME_RELEASE}
- exit ;;
- VAX*:ULTRIX*:*:*)
- echo vax-dec-ultrix${UNAME_RELEASE}
- exit ;;
- 2020:CLIX:*:* | 2430:CLIX:*:*)
- echo clipper-intergraph-clix${UNAME_RELEASE}
- exit ;;
- mips:*:*:UMIPS | mips:*:*:RISCos)
- eval $set_cc_for_build
- sed 's/^ //' << EOF >$dummy.c
-#ifdef __cplusplus
-#include <stdio.h> /* for printf() prototype */
- int main (int argc, char *argv[]) {
-#else
- int main (argc, argv) int argc; char *argv[]; {
-#endif
- #if defined (host_mips) && defined (MIPSEB)
- #if defined (SYSTYPE_SYSV)
- printf ("mips-mips-riscos%ssysv\n", argv[1]); exit (0);
- #endif
- #if defined (SYSTYPE_SVR4)
- printf ("mips-mips-riscos%ssvr4\n", argv[1]); exit (0);
- #endif
- #if defined (SYSTYPE_BSD43) || defined(SYSTYPE_BSD)
- printf ("mips-mips-riscos%sbsd\n", argv[1]); exit (0);
- #endif
- #endif
- exit (-1);
- }
-EOF
- $CC_FOR_BUILD -o $dummy $dummy.c &&
- dummyarg=`echo "${UNAME_RELEASE}" | sed -n 's/\([0-9]*\).*/\1/p'` &&
- SYSTEM_NAME=`$dummy $dummyarg` &&
- { echo "$SYSTEM_NAME"; exit; }
- echo mips-mips-riscos${UNAME_RELEASE}
- exit ;;
- Motorola:PowerMAX_OS:*:*)
- echo powerpc-motorola-powermax
- exit ;;
- Motorola:*:4.3:PL8-*)
- echo powerpc-harris-powermax
- exit ;;
- Night_Hawk:*:*:PowerMAX_OS | Synergy:PowerMAX_OS:*:*)
- echo powerpc-harris-powermax
- exit ;;
- Night_Hawk:Power_UNIX:*:*)
- echo powerpc-harris-powerunix
- exit ;;
- m88k:CX/UX:7*:*)
- echo m88k-harris-cxux7
- exit ;;
- m88k:*:4*:R4*)
- echo m88k-motorola-sysv4
- exit ;;
- m88k:*:3*:R3*)
- echo m88k-motorola-sysv3
- exit ;;
- AViiON:dgux:*:*)
- # DG/UX returns AViiON for all architectures
- UNAME_PROCESSOR=`/usr/bin/uname -p`
- if [ $UNAME_PROCESSOR = mc88100 ] || [ $UNAME_PROCESSOR = mc88110 ]
- then
- if [ ${TARGET_BINARY_INTERFACE}x = m88kdguxelfx ] || \
- [ ${TARGET_BINARY_INTERFACE}x = x ]
- then
- echo m88k-dg-dgux${UNAME_RELEASE}
- else
- echo m88k-dg-dguxbcs${UNAME_RELEASE}
- fi
- else
- echo i586-dg-dgux${UNAME_RELEASE}
- fi
- exit ;;
- M88*:DolphinOS:*:*) # DolphinOS (SVR3)
- echo m88k-dolphin-sysv3
- exit ;;
- M88*:*:R3*:*)
- # Delta 88k system running SVR3
- echo m88k-motorola-sysv3
- exit ;;
- XD88*:*:*:*) # Tektronix XD88 system running UTekV (SVR3)
- echo m88k-tektronix-sysv3
- exit ;;
- Tek43[0-9][0-9]:UTek:*:*) # Tektronix 4300 system running UTek (BSD)
- echo m68k-tektronix-bsd
- exit ;;
- *:IRIX*:*:*)
- echo mips-sgi-irix`echo ${UNAME_RELEASE}|sed -e 's/-/_/g'`
- exit ;;
- ????????:AIX?:[12].1:2) # AIX 2.2.1 or AIX 2.1.1 is RT/PC AIX.
- echo romp-ibm-aix # uname -m gives an 8 hex-code CPU id
- exit ;; # Note that: echo "'`uname -s`'" gives 'AIX '
- i*86:AIX:*:*)
- echo i386-ibm-aix
- exit ;;
- ia64:AIX:*:*)
- if [ -x /usr/bin/oslevel ] ; then
- IBM_REV=`/usr/bin/oslevel`
- else
- IBM_REV=${UNAME_VERSION}.${UNAME_RELEASE}
- fi
- echo ${UNAME_MACHINE}-ibm-aix${IBM_REV}
- exit ;;
- *:AIX:2:3)
- if grep bos325 /usr/include/stdio.h >/dev/null 2>&1; then
- eval $set_cc_for_build
- sed 's/^ //' << EOF >$dummy.c
- #include <sys/systemcfg.h>
-
- main()
- {
- if (!__power_pc())
- exit(1);
- puts("powerpc-ibm-aix3.2.5");
- exit(0);
- }
-EOF
- if $CC_FOR_BUILD -o $dummy $dummy.c && SYSTEM_NAME=`$dummy`
- then
- echo "$SYSTEM_NAME"
- else
- echo rs6000-ibm-aix3.2.5
- fi
- elif grep bos324 /usr/include/stdio.h >/dev/null 2>&1; then
- echo rs6000-ibm-aix3.2.4
- else
- echo rs6000-ibm-aix3.2
- fi
- exit ;;
- *:AIX:*:[456])
- IBM_CPU_ID=`/usr/sbin/lsdev -C -c processor -S available | sed 1q | awk '{ print $1 }'`
- if /usr/sbin/lsattr -El ${IBM_CPU_ID} | grep ' POWER' >/dev/null 2>&1; then
- IBM_ARCH=rs6000
- else
- IBM_ARCH=powerpc
- fi
- if [ -x /usr/bin/oslevel ] ; then
- IBM_REV=`/usr/bin/oslevel`
- else
- IBM_REV=${UNAME_VERSION}.${UNAME_RELEASE}
- fi
- echo ${IBM_ARCH}-ibm-aix${IBM_REV}
- exit ;;
- *:AIX:*:*)
- echo rs6000-ibm-aix
- exit ;;
- ibmrt:4.4BSD:*|romp-ibm:BSD:*)
- echo romp-ibm-bsd4.4
- exit ;;
- ibmrt:*BSD:*|romp-ibm:BSD:*) # covers RT/PC BSD and
- echo romp-ibm-bsd${UNAME_RELEASE} # 4.3 with uname added to
- exit ;; # report: romp-ibm BSD 4.3
- *:BOSX:*:*)
- echo rs6000-bull-bosx
- exit ;;
- DPX/2?00:B.O.S.:*:*)
- echo m68k-bull-sysv3
- exit ;;
- 9000/[34]??:4.3bsd:1.*:*)
- echo m68k-hp-bsd
- exit ;;
- hp300:4.4BSD:*:* | 9000/[34]??:4.3bsd:2.*:*)
- echo m68k-hp-bsd4.4
- exit ;;
- 9000/[34678]??:HP-UX:*:*)
- HPUX_REV=`echo ${UNAME_RELEASE}|sed -e 's/[^.]*.[0B]*//'`
- case "${UNAME_MACHINE}" in
- 9000/31? ) HP_ARCH=m68000 ;;
- 9000/[34]?? ) HP_ARCH=m68k ;;
- 9000/[678][0-9][0-9])
- if [ -x /usr/bin/getconf ]; then
- sc_cpu_version=`/usr/bin/getconf SC_CPU_VERSION 2>/dev/null`
- sc_kernel_bits=`/usr/bin/getconf SC_KERNEL_BITS 2>/dev/null`
- case "${sc_cpu_version}" in
- 523) HP_ARCH="hppa1.0" ;; # CPU_PA_RISC1_0
- 528) HP_ARCH="hppa1.1" ;; # CPU_PA_RISC1_1
- 532) # CPU_PA_RISC2_0
- case "${sc_kernel_bits}" in
- 32) HP_ARCH="hppa2.0n" ;;
- 64) HP_ARCH="hppa2.0w" ;;
- '') HP_ARCH="hppa2.0" ;; # HP-UX 10.20
- esac ;;
- esac
- fi
- if [ "${HP_ARCH}" = "" ]; then
- eval $set_cc_for_build
- sed 's/^ //' << EOF >$dummy.c
-
- #define _HPUX_SOURCE
- #include <stdlib.h>
- #include <unistd.h>
-
- int main ()
- {
- #if defined(_SC_KERNEL_BITS)
- long bits = sysconf(_SC_KERNEL_BITS);
- #endif
- long cpu = sysconf (_SC_CPU_VERSION);
-
- switch (cpu)
- {
- case CPU_PA_RISC1_0: puts ("hppa1.0"); break;
- case CPU_PA_RISC1_1: puts ("hppa1.1"); break;
- case CPU_PA_RISC2_0:
- #if defined(_SC_KERNEL_BITS)
- switch (bits)
- {
- case 64: puts ("hppa2.0w"); break;
- case 32: puts ("hppa2.0n"); break;
- default: puts ("hppa2.0"); break;
- } break;
- #else /* !defined(_SC_KERNEL_BITS) */
- puts ("hppa2.0"); break;
- #endif
- default: puts ("hppa1.0"); break;
- }
- exit (0);
- }
-EOF
- (CCOPTS= $CC_FOR_BUILD -o $dummy $dummy.c 2>/dev/null) && HP_ARCH=`$dummy`
- test -z "$HP_ARCH" && HP_ARCH=hppa
- fi ;;
- esac
- if [ ${HP_ARCH} = "hppa2.0w" ]
- then
- eval $set_cc_for_build
-
- # hppa2.0w-hp-hpux* has a 64-bit kernel and a compiler generating
- # 32-bit code. hppa64-hp-hpux* has the same kernel and a compiler
- # generating 64-bit code. GNU and HP use different nomenclature:
- #
- # $ CC_FOR_BUILD=cc ./config.guess
- # => hppa2.0w-hp-hpux11.23
- # $ CC_FOR_BUILD="cc +DA2.0w" ./config.guess
- # => hppa64-hp-hpux11.23
-
- if echo __LP64__ | (CCOPTS= $CC_FOR_BUILD -E - 2>/dev/null) |
- grep __LP64__ >/dev/null
- then
- HP_ARCH="hppa2.0w"
- else
- HP_ARCH="hppa64"
- fi
- fi
- echo ${HP_ARCH}-hp-hpux${HPUX_REV}
- exit ;;
- ia64:HP-UX:*:*)
- HPUX_REV=`echo ${UNAME_RELEASE}|sed -e 's/[^.]*.[0B]*//'`
- echo ia64-hp-hpux${HPUX_REV}
- exit ;;
- 3050*:HI-UX:*:*)
- eval $set_cc_for_build
- sed 's/^ //' << EOF >$dummy.c
- #include <unistd.h>
- int
- main ()
- {
- long cpu = sysconf (_SC_CPU_VERSION);
- /* The order matters, because CPU_IS_HP_MC68K erroneously returns
- true for CPU_PA_RISC1_0. CPU_IS_PA_RISC returns correct
- results, however. */
- if (CPU_IS_PA_RISC (cpu))
- {
- switch (cpu)
- {
- case CPU_PA_RISC1_0: puts ("hppa1.0-hitachi-hiuxwe2"); break;
- case CPU_PA_RISC1_1: puts ("hppa1.1-hitachi-hiuxwe2"); break;
- case CPU_PA_RISC2_0: puts ("hppa2.0-hitachi-hiuxwe2"); break;
- default: puts ("hppa-hitachi-hiuxwe2"); break;
- }
- }
- else if (CPU_IS_HP_MC68K (cpu))
- puts ("m68k-hitachi-hiuxwe2");
- else puts ("unknown-hitachi-hiuxwe2");
- exit (0);
- }
-EOF
- $CC_FOR_BUILD -o $dummy $dummy.c && SYSTEM_NAME=`$dummy` &&
- { echo "$SYSTEM_NAME"; exit; }
- echo unknown-hitachi-hiuxwe2
- exit ;;
- 9000/7??:4.3bsd:*:* | 9000/8?[79]:4.3bsd:*:* )
- echo hppa1.1-hp-bsd
- exit ;;
- 9000/8??:4.3bsd:*:*)
- echo hppa1.0-hp-bsd
- exit ;;
- *9??*:MPE/iX:*:* | *3000*:MPE/iX:*:*)
- echo hppa1.0-hp-mpeix
- exit ;;
- hp7??:OSF1:*:* | hp8?[79]:OSF1:*:* )
- echo hppa1.1-hp-osf
- exit ;;
- hp8??:OSF1:*:*)
- echo hppa1.0-hp-osf
- exit ;;
- i*86:OSF1:*:*)
- if [ -x /usr/sbin/sysversion ] ; then
- echo ${UNAME_MACHINE}-unknown-osf1mk
- else
- echo ${UNAME_MACHINE}-unknown-osf1
- fi
- exit ;;
- parisc*:Lites*:*:*)
- echo hppa1.1-hp-lites
- exit ;;
- C1*:ConvexOS:*:* | convex:ConvexOS:C1*:*)
- echo c1-convex-bsd
- exit ;;
- C2*:ConvexOS:*:* | convex:ConvexOS:C2*:*)
- if getsysinfo -f scalar_acc
- then echo c32-convex-bsd
- else echo c2-convex-bsd
- fi
- exit ;;
- C34*:ConvexOS:*:* | convex:ConvexOS:C34*:*)
- echo c34-convex-bsd
- exit ;;
- C38*:ConvexOS:*:* | convex:ConvexOS:C38*:*)
- echo c38-convex-bsd
- exit ;;
- C4*:ConvexOS:*:* | convex:ConvexOS:C4*:*)
- echo c4-convex-bsd
- exit ;;
- CRAY*Y-MP:*:*:*)
- echo ymp-cray-unicos${UNAME_RELEASE} | sed -e 's/\.[^.]*$/.X/'
- exit ;;
- CRAY*[A-Z]90:*:*:*)
- echo ${UNAME_MACHINE}-cray-unicos${UNAME_RELEASE} \
- | sed -e 's/CRAY.*\([A-Z]90\)/\1/' \
- -e y/ABCDEFGHIJKLMNOPQRSTUVWXYZ/abcdefghijklmnopqrstuvwxyz/ \
- -e 's/\.[^.]*$/.X/'
- exit ;;
- CRAY*TS:*:*:*)
- echo t90-cray-unicos${UNAME_RELEASE} | sed -e 's/\.[^.]*$/.X/'
- exit ;;
- CRAY*T3E:*:*:*)
- echo alphaev5-cray-unicosmk${UNAME_RELEASE} | sed -e 's/\.[^.]*$/.X/'
- exit ;;
- CRAY*SV1:*:*:*)
- echo sv1-cray-unicos${UNAME_RELEASE} | sed -e 's/\.[^.]*$/.X/'
- exit ;;
- *:UNICOS/mp:*:*)
- echo craynv-cray-unicosmp${UNAME_RELEASE} | sed -e 's/\.[^.]*$/.X/'
- exit ;;
- F30[01]:UNIX_System_V:*:* | F700:UNIX_System_V:*:*)
- FUJITSU_PROC=`uname -m | tr 'ABCDEFGHIJKLMNOPQRSTUVWXYZ' 'abcdefghijklmnopqrstuvwxyz'`
- FUJITSU_SYS=`uname -p | tr 'ABCDEFGHIJKLMNOPQRSTUVWXYZ' 'abcdefghijklmnopqrstuvwxyz' | sed -e 's/\///'`
- FUJITSU_REL=`echo ${UNAME_RELEASE} | sed -e 's/ /_/'`
- echo "${FUJITSU_PROC}-fujitsu-${FUJITSU_SYS}${FUJITSU_REL}"
- exit ;;
- 5000:UNIX_System_V:4.*:*)
- FUJITSU_SYS=`uname -p | tr 'ABCDEFGHIJKLMNOPQRSTUVWXYZ' 'abcdefghijklmnopqrstuvwxyz' | sed -e 's/\///'`
- FUJITSU_REL=`echo ${UNAME_RELEASE} | tr 'ABCDEFGHIJKLMNOPQRSTUVWXYZ' 'abcdefghijklmnopqrstuvwxyz' | sed -e 's/ /_/'`
- echo "sparc-fujitsu-${FUJITSU_SYS}${FUJITSU_REL}"
- exit ;;
- i*86:BSD/386:*:* | i*86:BSD/OS:*:* | *:Ascend\ Embedded/OS:*:*)
- echo ${UNAME_MACHINE}-pc-bsdi${UNAME_RELEASE}
- exit ;;
- sparc*:BSD/OS:*:*)
- echo sparc-unknown-bsdi${UNAME_RELEASE}
- exit ;;
- *:BSD/OS:*:*)
- echo ${UNAME_MACHINE}-unknown-bsdi${UNAME_RELEASE}
- exit ;;
- *:FreeBSD:*:*)
- case ${UNAME_MACHINE} in
- pc98)
- echo i386-unknown-freebsd`echo ${UNAME_RELEASE}|sed -e 's/[-(].*//'` ;;
- amd64)
- echo x86_64-unknown-freebsd`echo ${UNAME_RELEASE}|sed -e 's/[-(].*//'` ;;
- *)
- echo ${UNAME_MACHINE}-unknown-freebsd`echo ${UNAME_RELEASE}|sed -e 's/[-(].*//'` ;;
- esac
- exit ;;
- i*:CYGWIN*:*)
- echo ${UNAME_MACHINE}-pc-cygwin
- exit ;;
- *:MINGW*:*)
- echo ${UNAME_MACHINE}-pc-mingw32
- exit ;;
- i*:windows32*:*)
- # uname -m includes "-pc" on this system.
- echo ${UNAME_MACHINE}-mingw32
- exit ;;
- i*:PW*:*)
- echo ${UNAME_MACHINE}-pc-pw32
- exit ;;
- *:Interix*:[3456]*)
- case ${UNAME_MACHINE} in
- x86)
- echo i586-pc-interix${UNAME_RELEASE}
- exit ;;
- EM64T | authenticamd | genuineintel)
- echo x86_64-unknown-interix${UNAME_RELEASE}
- exit ;;
- IA64)
- echo ia64-unknown-interix${UNAME_RELEASE}
- exit ;;
- esac ;;
- [345]86:Windows_95:* | [345]86:Windows_98:* | [345]86:Windows_NT:*)
- echo i${UNAME_MACHINE}-pc-mks
- exit ;;
- i*:Windows_NT*:* | Pentium*:Windows_NT*:*)
- # How do we know it's Interix rather than the generic POSIX subsystem?
- # It also conflicts with pre-2.0 versions of AT&T UWIN. Should we
- # UNAME_MACHINE based on the output of uname instead of i386?
- echo i586-pc-interix
- exit ;;
- i*:UWIN*:*)
- echo ${UNAME_MACHINE}-pc-uwin
- exit ;;
- amd64:CYGWIN*:*:* | x86_64:CYGWIN*:*:*)
- echo x86_64-unknown-cygwin
- exit ;;
- p*:CYGWIN*:*)
- echo powerpcle-unknown-cygwin
- exit ;;
- prep*:SunOS:5.*:*)
- echo powerpcle-unknown-solaris2`echo ${UNAME_RELEASE}|sed -e 's/[^.]*//'`
- exit ;;
- *:GNU:*:*)
- # the GNU system
- echo `echo ${UNAME_MACHINE}|sed -e 's,[-/].*$,,'`-unknown-gnu`echo ${UNAME_RELEASE}|sed -e 's,/.*$,,'`
- exit ;;
- *:GNU/*:*:*)
- # other systems with GNU libc and userland
- echo ${UNAME_MACHINE}-unknown-`echo ${UNAME_SYSTEM} | sed 's,^[^/]*/,,' | tr '[A-Z]' '[a-z]'``echo ${UNAME_RELEASE}|sed -e 's/[-(].*//'`-gnu
- exit ;;
- i*86:Minix:*:*)
- echo ${UNAME_MACHINE}-pc-minix
- exit ;;
- arm*:Linux:*:*)
- eval $set_cc_for_build
- if echo __ARM_EABI__ | $CC_FOR_BUILD -E - 2>/dev/null \
- | grep -q __ARM_EABI__
- then
- echo ${UNAME_MACHINE}-unknown-linux-gnu
- else
- echo ${UNAME_MACHINE}-unknown-linux-gnueabi
- fi
- exit ;;
- avr32*:Linux:*:*)
- echo ${UNAME_MACHINE}-unknown-linux-gnu
- exit ;;
- cris:Linux:*:*)
- echo cris-axis-linux-gnu
- exit ;;
- crisv32:Linux:*:*)
- echo crisv32-axis-linux-gnu
- exit ;;
- frv:Linux:*:*)
- echo frv-unknown-linux-gnu
- exit ;;
- ia64:Linux:*:*)
- echo ${UNAME_MACHINE}-unknown-linux-gnu
- exit ;;
- m32r*:Linux:*:*)
- echo ${UNAME_MACHINE}-unknown-linux-gnu
- exit ;;
- m68*:Linux:*:*)
- echo ${UNAME_MACHINE}-unknown-linux-gnu
- exit ;;
- mips:Linux:*:*)
- eval $set_cc_for_build
- sed 's/^ //' << EOF >$dummy.c
- #undef CPU
- #undef mips
- #undef mipsel
- #if defined(__MIPSEL__) || defined(__MIPSEL) || defined(_MIPSEL) || defined(MIPSEL)
- CPU=mipsel
- #else
- #if defined(__MIPSEB__) || defined(__MIPSEB) || defined(_MIPSEB) || defined(MIPSEB)
- CPU=mips
- #else
- CPU=
- #endif
- #endif
-EOF
- eval "`$CC_FOR_BUILD -E $dummy.c 2>/dev/null | sed -n '
- /^CPU/{
- s: ::g
- p
- }'`"
- test x"${CPU}" != x && { echo "${CPU}-unknown-linux-gnu"; exit; }
- ;;
- mips64:Linux:*:*)
- eval $set_cc_for_build
- sed 's/^ //' << EOF >$dummy.c
- #undef CPU
- #undef mips64
- #undef mips64el
- #if defined(__MIPSEL__) || defined(__MIPSEL) || defined(_MIPSEL) || defined(MIPSEL)
- CPU=mips64el
- #else
- #if defined(__MIPSEB__) || defined(__MIPSEB) || defined(_MIPSEB) || defined(MIPSEB)
- CPU=mips64
- #else
- CPU=
- #endif
- #endif
-EOF
- eval "`$CC_FOR_BUILD -E $dummy.c 2>/dev/null | sed -n '
- /^CPU/{
- s: ::g
- p
- }'`"
- test x"${CPU}" != x && { echo "${CPU}-unknown-linux-gnu"; exit; }
- ;;
- or32:Linux:*:*)
- echo or32-unknown-linux-gnu
- exit ;;
- ppc:Linux:*:*)
- echo powerpc-unknown-linux-gnu
- exit ;;
- ppc64:Linux:*:*)
- echo powerpc64-unknown-linux-gnu
- exit ;;
- alpha:Linux:*:*)
- case `sed -n '/^cpu model/s/^.*: \(.*\)/\1/p' < /proc/cpuinfo` in
- EV5) UNAME_MACHINE=alphaev5 ;;
- EV56) UNAME_MACHINE=alphaev56 ;;
- PCA56) UNAME_MACHINE=alphapca56 ;;
- PCA57) UNAME_MACHINE=alphapca56 ;;
- EV6) UNAME_MACHINE=alphaev6 ;;
- EV67) UNAME_MACHINE=alphaev67 ;;
- EV68*) UNAME_MACHINE=alphaev68 ;;
- esac
- objdump --private-headers /bin/sh | grep ld.so.1 >/dev/null
- if test "$?" = 0 ; then LIBC="libc1" ; else LIBC="" ; fi
- echo ${UNAME_MACHINE}-unknown-linux-gnu${LIBC}
- exit ;;
- padre:Linux:*:*)
- echo sparc-unknown-linux-gnu
- exit ;;
- parisc:Linux:*:* | hppa:Linux:*:*)
- # Look for CPU level
- case `grep '^cpu[^a-z]*:' /proc/cpuinfo 2>/dev/null | cut -d' ' -f2` in
- PA7*) echo hppa1.1-unknown-linux-gnu ;;
- PA8*) echo hppa2.0-unknown-linux-gnu ;;
- *) echo hppa-unknown-linux-gnu ;;
- esac
- exit ;;
- parisc64:Linux:*:* | hppa64:Linux:*:*)
- echo hppa64-unknown-linux-gnu
- exit ;;
- s390:Linux:*:* | s390x:Linux:*:*)
- echo ${UNAME_MACHINE}-ibm-linux
- exit ;;
- sh64*:Linux:*:*)
- echo ${UNAME_MACHINE}-unknown-linux-gnu
- exit ;;
- sh*:Linux:*:*)
- echo ${UNAME_MACHINE}-unknown-linux-gnu
- exit ;;
- sparc:Linux:*:* | sparc64:Linux:*:*)
- echo ${UNAME_MACHINE}-unknown-linux-gnu
- exit ;;
- vax:Linux:*:*)
- echo ${UNAME_MACHINE}-dec-linux-gnu
- exit ;;
- x86_64:Linux:*:*)
- echo x86_64-unknown-linux-gnu
- exit ;;
- xtensa*:Linux:*:*)
- echo ${UNAME_MACHINE}-unknown-linux-gnu
- exit ;;
- i*86:Linux:*:*)
- # The BFD linker knows what the default object file format is, so
- # first see if it will tell us. cd to the root directory to prevent
- # problems with other programs or directories called `ld' in the path.
- # Set LC_ALL=C to ensure ld outputs messages in English.
- ld_supported_targets=`cd /; LC_ALL=C ld --help 2>&1 \
- | sed -ne '/supported targets:/!d
- s/[ ][ ]*/ /g
- s/.*supported targets: *//
- s/ .*//
- p'`
- case "$ld_supported_targets" in
- elf32-i386)
- TENTATIVE="${UNAME_MACHINE}-pc-linux-gnu"
- ;;
- a.out-i386-linux)
- echo "${UNAME_MACHINE}-pc-linux-gnuaout"
- exit ;;
- "")
- # Either a pre-BFD a.out linker (linux-gnuoldld) or
- # one that does not give us useful --help.
- echo "${UNAME_MACHINE}-pc-linux-gnuoldld"
- exit ;;
- esac
- # Determine whether the default compiler is a.out or elf
- eval $set_cc_for_build
- sed 's/^ //' << EOF >$dummy.c
- #include <features.h>
- #ifdef __ELF__
- # ifdef __GLIBC__
- # if __GLIBC__ >= 2
- LIBC=gnu
- # else
- LIBC=gnulibc1
- # endif
- # else
- LIBC=gnulibc1
- # endif
- #else
- #if defined(__INTEL_COMPILER) || defined(__PGI) || defined(__SUNPRO_C) || defined(__SUNPRO_CC)
- LIBC=gnu
- #else
- LIBC=gnuaout
- #endif
- #endif
- #ifdef __dietlibc__
- LIBC=dietlibc
- #endif
-EOF
- eval "`$CC_FOR_BUILD -E $dummy.c 2>/dev/null | sed -n '
- /^LIBC/{
- s: ::g
- p
- }'`"
- test x"${LIBC}" != x && {
- echo "${UNAME_MACHINE}-pc-linux-${LIBC}"
- exit
- }
- test x"${TENTATIVE}" != x && { echo "${TENTATIVE}"; exit; }
- ;;
- i*86:DYNIX/ptx:4*:*)
- # ptx 4.0 does uname -s correctly, with DYNIX/ptx in there.
- # earlier versions are messed up and put the nodename in both
- # sysname and nodename.
- echo i386-sequent-sysv4
- exit ;;
- i*86:UNIX_SV:4.2MP:2.*)
- # Unixware is an offshoot of SVR4, but it has its own version
- # number series starting with 2...
- # I am not positive that other SVR4 systems won't match this,
- # I just have to hope. -- rms.
- # Use sysv4.2uw... so that sysv4* matches it.
- echo ${UNAME_MACHINE}-pc-sysv4.2uw${UNAME_VERSION}
- exit ;;
- i*86:OS/2:*:*)
- # If we were able to find `uname', then EMX Unix compatibility
- # is probably installed.
- echo ${UNAME_MACHINE}-pc-os2-emx
- exit ;;
- i*86:XTS-300:*:STOP)
- echo ${UNAME_MACHINE}-unknown-stop
- exit ;;
- i*86:atheos:*:*)
- echo ${UNAME_MACHINE}-unknown-atheos
- exit ;;
- i*86:syllable:*:*)
- echo ${UNAME_MACHINE}-pc-syllable
- exit ;;
- i*86:LynxOS:2.*:* | i*86:LynxOS:3.[01]*:* | i*86:LynxOS:4.0*:*)
- echo i386-unknown-lynxos${UNAME_RELEASE}
- exit ;;
- i*86:*DOS:*:*)
- echo ${UNAME_MACHINE}-pc-msdosdjgpp
- exit ;;
- i*86:*:4.*:* | i*86:SYSTEM_V:4.*:*)
- UNAME_REL=`echo ${UNAME_RELEASE} | sed 's/\/MP$//'`
- if grep Novell /usr/include/link.h >/dev/null 2>/dev/null; then
- echo ${UNAME_MACHINE}-univel-sysv${UNAME_REL}
- else
- echo ${UNAME_MACHINE}-pc-sysv${UNAME_REL}
- fi
- exit ;;
- i*86:*:5:[678]*)
- # UnixWare 7.x, OpenUNIX and OpenServer 6.
- case `/bin/uname -X | grep "^Machine"` in
- *486*) UNAME_MACHINE=i486 ;;
- *Pentium) UNAME_MACHINE=i586 ;;
- *Pent*|*Celeron) UNAME_MACHINE=i686 ;;
- esac
- echo ${UNAME_MACHINE}-unknown-sysv${UNAME_RELEASE}${UNAME_SYSTEM}${UNAME_VERSION}
- exit ;;
- i*86:*:3.2:*)
- if test -f /usr/options/cb.name; then
- UNAME_REL=`sed -n 's/.*Version //p' </usr/options/cb.name`
- echo ${UNAME_MACHINE}-pc-isc$UNAME_REL
- elif /bin/uname -X 2>/dev/null >/dev/null ; then
- UNAME_REL=`(/bin/uname -X|grep Release|sed -e 's/.*= //')`
- (/bin/uname -X|grep i80486 >/dev/null) && UNAME_MACHINE=i486
- (/bin/uname -X|grep '^Machine.*Pentium' >/dev/null) \
- && UNAME_MACHINE=i586
- (/bin/uname -X|grep '^Machine.*Pent *II' >/dev/null) \
- && UNAME_MACHINE=i686
- (/bin/uname -X|grep '^Machine.*Pentium Pro' >/dev/null) \
- && UNAME_MACHINE=i686
- echo ${UNAME_MACHINE}-pc-sco$UNAME_REL
- else
- echo ${UNAME_MACHINE}-pc-sysv32
- fi
- exit ;;
- pc:*:*:*)
- # Left here for compatibility:
- # uname -m prints for DJGPP always 'pc', but it prints nothing about
- # the processor, so we play safe by assuming i586.
- # Note: whatever this is, it MUST be the same as what config.sub
- # prints for the "djgpp" host, or else GDB configury will decide that
- # this is a cross-build.
- echo i586-pc-msdosdjgpp
- exit ;;
- Intel:Mach:3*:*)
- echo i386-pc-mach3
- exit ;;
- paragon:*:*:*)
- echo i860-intel-osf1
- exit ;;
- i860:*:4.*:*) # i860-SVR4
- if grep Stardent /usr/include/sys/uadmin.h >/dev/null 2>&1 ; then
- echo i860-stardent-sysv${UNAME_RELEASE} # Stardent Vistra i860-SVR4
- else # Add other i860-SVR4 vendors below as they are discovered.
- echo i860-unknown-sysv${UNAME_RELEASE} # Unknown i860-SVR4
- fi
- exit ;;
- mini*:CTIX:SYS*5:*)
- # "miniframe"
- echo m68010-convergent-sysv
- exit ;;
- mc68k:UNIX:SYSTEM5:3.51m)
- echo m68k-convergent-sysv
- exit ;;
- M680?0:D-NIX:5.3:*)
- echo m68k-diab-dnix
- exit ;;
- M68*:*:R3V[5678]*:*)
- test -r /sysV68 && { echo 'm68k-motorola-sysv'; exit; } ;;
- 3[345]??:*:4.0:3.0 | 3[34]??A:*:4.0:3.0 | 3[34]??,*:*:4.0:3.0 | 3[34]??/*:*:4.0:3.0 | 4400:*:4.0:3.0 | 4850:*:4.0:3.0 | SKA40:*:4.0:3.0 | SDS2:*:4.0:3.0 | SHG2:*:4.0:3.0 | S7501*:*:4.0:3.0)
- OS_REL=''
- test -r /etc/.relid \
- && OS_REL=.`sed -n 's/[^ ]* [^ ]* \([0-9][0-9]\).*/\1/p' < /etc/.relid`
- /bin/uname -p 2>/dev/null | grep 86 >/dev/null \
- && { echo i486-ncr-sysv4.3${OS_REL}; exit; }
- /bin/uname -p 2>/dev/null | /bin/grep entium >/dev/null \
- && { echo i586-ncr-sysv4.3${OS_REL}; exit; } ;;
- 3[34]??:*:4.0:* | 3[34]??,*:*:4.0:*)
- /bin/uname -p 2>/dev/null | grep 86 >/dev/null \
- && { echo i486-ncr-sysv4; exit; } ;;
- NCR*:*:4.2:* | MPRAS*:*:4.2:*)
- OS_REL='.3'
- test -r /etc/.relid \
- && OS_REL=.`sed -n 's/[^ ]* [^ ]* \([0-9][0-9]\).*/\1/p' < /etc/.relid`
- /bin/uname -p 2>/dev/null | grep 86 >/dev/null \
- && { echo i486-ncr-sysv4.3${OS_REL}; exit; }
- /bin/uname -p 2>/dev/null | /bin/grep entium >/dev/null \
- && { echo i586-ncr-sysv4.3${OS_REL}; exit; }
- /bin/uname -p 2>/dev/null | /bin/grep pteron >/dev/null \
- && { echo i586-ncr-sysv4.3${OS_REL}; exit; } ;;
- m68*:LynxOS:2.*:* | m68*:LynxOS:3.0*:*)
- echo m68k-unknown-lynxos${UNAME_RELEASE}
- exit ;;
- mc68030:UNIX_System_V:4.*:*)
- echo m68k-atari-sysv4
- exit ;;
- TSUNAMI:LynxOS:2.*:*)
- echo sparc-unknown-lynxos${UNAME_RELEASE}
- exit ;;
- rs6000:LynxOS:2.*:*)
- echo rs6000-unknown-lynxos${UNAME_RELEASE}
- exit ;;
- PowerPC:LynxOS:2.*:* | PowerPC:LynxOS:3.[01]*:* | PowerPC:LynxOS:4.0*:*)
- echo powerpc-unknown-lynxos${UNAME_RELEASE}
- exit ;;
- SM[BE]S:UNIX_SV:*:*)
- echo mips-dde-sysv${UNAME_RELEASE}
- exit ;;
- RM*:ReliantUNIX-*:*:*)
- echo mips-sni-sysv4
- exit ;;
- RM*:SINIX-*:*:*)
- echo mips-sni-sysv4
- exit ;;
- *:SINIX-*:*:*)
- if uname -p 2>/dev/null >/dev/null ; then
- UNAME_MACHINE=`(uname -p) 2>/dev/null`
- echo ${UNAME_MACHINE}-sni-sysv4
- else
- echo ns32k-sni-sysv
- fi
- exit ;;
- PENTIUM:*:4.0*:*) # Unisys `ClearPath HMP IX 4000' SVR4/MP effort
- # says <Richard.M.Bartel@ccMail.Census.GOV>
- echo i586-unisys-sysv4
- exit ;;
- *:UNIX_System_V:4*:FTX*)
- # From Gerald Hewes <hewes@openmarket.com>.
- # How about differentiating between stratus architectures? -djm
- echo hppa1.1-stratus-sysv4
- exit ;;
- *:*:*:FTX*)
- # From seanf@swdc.stratus.com.
- echo i860-stratus-sysv4
- exit ;;
- i*86:VOS:*:*)
- # From Paul.Green@stratus.com.
- echo ${UNAME_MACHINE}-stratus-vos
- exit ;;
- *:VOS:*:*)
- # From Paul.Green@stratus.com.
- echo hppa1.1-stratus-vos
- exit ;;
- mc68*:A/UX:*:*)
- echo m68k-apple-aux${UNAME_RELEASE}
- exit ;;
- news*:NEWS-OS:6*:*)
- echo mips-sony-newsos6
- exit ;;
- R[34]000:*System_V*:*:* | R4000:UNIX_SYSV:*:* | R*000:UNIX_SV:*:*)
- if [ -d /usr/nec ]; then
- echo mips-nec-sysv${UNAME_RELEASE}
- else
- echo mips-unknown-sysv${UNAME_RELEASE}
- fi
- exit ;;
- BeBox:BeOS:*:*) # BeOS running on hardware made by Be, PPC only.
- echo powerpc-be-beos
- exit ;;
- BeMac:BeOS:*:*) # BeOS running on Mac or Mac clone, PPC only.
- echo powerpc-apple-beos
- exit ;;
- BePC:BeOS:*:*) # BeOS running on Intel PC compatible.
- echo i586-pc-beos
- exit ;;
- BePC:Haiku:*:*) # Haiku running on Intel PC compatible.
- echo i586-pc-haiku
- exit ;;
- SX-4:SUPER-UX:*:*)
- echo sx4-nec-superux${UNAME_RELEASE}
- exit ;;
- SX-5:SUPER-UX:*:*)
- echo sx5-nec-superux${UNAME_RELEASE}
- exit ;;
- SX-6:SUPER-UX:*:*)
- echo sx6-nec-superux${UNAME_RELEASE}
- exit ;;
- SX-7:SUPER-UX:*:*)
- echo sx7-nec-superux${UNAME_RELEASE}
- exit ;;
- SX-8:SUPER-UX:*:*)
- echo sx8-nec-superux${UNAME_RELEASE}
- exit ;;
- SX-8R:SUPER-UX:*:*)
- echo sx8r-nec-superux${UNAME_RELEASE}
- exit ;;
- Power*:Rhapsody:*:*)
- echo powerpc-apple-rhapsody${UNAME_RELEASE}
- exit ;;
- *:Rhapsody:*:*)
- echo ${UNAME_MACHINE}-apple-rhapsody${UNAME_RELEASE}
- exit ;;
- *:Darwin:*:*)
- UNAME_PROCESSOR=`uname -p` || UNAME_PROCESSOR=unknown
- case $UNAME_PROCESSOR in
- unknown) UNAME_PROCESSOR=powerpc ;;
- esac
- echo ${UNAME_PROCESSOR}-apple-darwin${UNAME_RELEASE}
- exit ;;
- *:procnto*:*:* | *:QNX:[0123456789]*:*)
- UNAME_PROCESSOR=`uname -p`
- if test "$UNAME_PROCESSOR" = "x86"; then
- UNAME_PROCESSOR=i386
- UNAME_MACHINE=pc
- fi
- echo ${UNAME_PROCESSOR}-${UNAME_MACHINE}-nto-qnx${UNAME_RELEASE}
- exit ;;
- *:QNX:*:4*)
- echo i386-pc-qnx
- exit ;;
- NSE-?:NONSTOP_KERNEL:*:*)
- echo nse-tandem-nsk${UNAME_RELEASE}
- exit ;;
- NSR-?:NONSTOP_KERNEL:*:*)
- echo nsr-tandem-nsk${UNAME_RELEASE}
- exit ;;
- *:NonStop-UX:*:*)
- echo mips-compaq-nonstopux
- exit ;;
- BS2000:POSIX*:*:*)
- echo bs2000-siemens-sysv
- exit ;;
- DS/*:UNIX_System_V:*:*)
- echo ${UNAME_MACHINE}-${UNAME_SYSTEM}-${UNAME_RELEASE}
- exit ;;
- *:Plan9:*:*)
- # "uname -m" is not consistent, so use $cputype instead. 386
- # is converted to i386 for consistency with other x86
- # operating systems.
- if test "$cputype" = "386"; then
- UNAME_MACHINE=i386
- else
- UNAME_MACHINE="$cputype"
- fi
- echo ${UNAME_MACHINE}-unknown-plan9
- exit ;;
- *:TOPS-10:*:*)
- echo pdp10-unknown-tops10
- exit ;;
- *:TENEX:*:*)
- echo pdp10-unknown-tenex
- exit ;;
- KS10:TOPS-20:*:* | KL10:TOPS-20:*:* | TYPE4:TOPS-20:*:*)
- echo pdp10-dec-tops20
- exit ;;
- XKL-1:TOPS-20:*:* | TYPE5:TOPS-20:*:*)
- echo pdp10-xkl-tops20
- exit ;;
- *:TOPS-20:*:*)
- echo pdp10-unknown-tops20
- exit ;;
- *:ITS:*:*)
- echo pdp10-unknown-its
- exit ;;
- SEI:*:*:SEIUX)
- echo mips-sei-seiux${UNAME_RELEASE}
- exit ;;
- *:DragonFly:*:*)
- echo ${UNAME_MACHINE}-unknown-dragonfly`echo ${UNAME_RELEASE}|sed -e 's/[-(].*//'`
- exit ;;
- *:*VMS:*:*)
- UNAME_MACHINE=`(uname -p) 2>/dev/null`
- case "${UNAME_MACHINE}" in
- A*) echo alpha-dec-vms ; exit ;;
- I*) echo ia64-dec-vms ; exit ;;
- V*) echo vax-dec-vms ; exit ;;
- esac ;;
- *:XENIX:*:SysV)
- echo i386-pc-xenix
- exit ;;
- i*86:skyos:*:*)
- echo ${UNAME_MACHINE}-pc-skyos`echo ${UNAME_RELEASE}` | sed -e 's/ .*$//'
- exit ;;
- i*86:rdos:*:*)
- echo ${UNAME_MACHINE}-pc-rdos
- exit ;;
- i*86:AROS:*:*)
- echo ${UNAME_MACHINE}-pc-aros
- exit ;;
-esac
-
-#echo '(No uname command or uname output not recognized.)' 1>&2
-#echo "${UNAME_MACHINE}:${UNAME_SYSTEM}:${UNAME_RELEASE}:${UNAME_VERSION}" 1>&2
-
-eval $set_cc_for_build
-cat >$dummy.c <<EOF
-#ifdef _SEQUENT_
-# include <sys/types.h>
-# include <sys/utsname.h>
-#endif
-main ()
-{
-#if defined (sony)
-#if defined (MIPSEB)
- /* BFD wants "bsd" instead of "newsos". Perhaps BFD should be changed,
- I don't know.... */
- printf ("mips-sony-bsd\n"); exit (0);
-#else
-#include <sys/param.h>
- printf ("m68k-sony-newsos%s\n",
-#ifdef NEWSOS4
- "4"
-#else
- ""
-#endif
- ); exit (0);
-#endif
-#endif
-
-#if defined (__arm) && defined (__acorn) && defined (__unix)
- printf ("arm-acorn-riscix\n"); exit (0);
-#endif
-
-#if defined (hp300) && !defined (hpux)
- printf ("m68k-hp-bsd\n"); exit (0);
-#endif
-
-#if defined (NeXT)
-#if !defined (__ARCHITECTURE__)
-#define __ARCHITECTURE__ "m68k"
-#endif
- int version;
- version=`(hostinfo | sed -n 's/.*NeXT Mach \([0-9]*\).*/\1/p') 2>/dev/null`;
- if (version < 4)
- printf ("%s-next-nextstep%d\n", __ARCHITECTURE__, version);
- else
- printf ("%s-next-openstep%d\n", __ARCHITECTURE__, version);
- exit (0);
-#endif
-
-#if defined (MULTIMAX) || defined (n16)
-#if defined (UMAXV)
- printf ("ns32k-encore-sysv\n"); exit (0);
-#else
-#if defined (CMU)
- printf ("ns32k-encore-mach\n"); exit (0);
-#else
- printf ("ns32k-encore-bsd\n"); exit (0);
-#endif
-#endif
-#endif
-
-#if defined (__386BSD__)
- printf ("i386-pc-bsd\n"); exit (0);
-#endif
-
-#if defined (sequent)
-#if defined (i386)
- printf ("i386-sequent-dynix\n"); exit (0);
-#endif
-#if defined (ns32000)
- printf ("ns32k-sequent-dynix\n"); exit (0);
-#endif
-#endif
-
-#if defined (_SEQUENT_)
- struct utsname un;
-
- uname(&un);
-
- if (strncmp(un.version, "V2", 2) == 0) {
- printf ("i386-sequent-ptx2\n"); exit (0);
- }
- if (strncmp(un.version, "V1", 2) == 0) { /* XXX is V1 correct? */
- printf ("i386-sequent-ptx1\n"); exit (0);
- }
- printf ("i386-sequent-ptx\n"); exit (0);
-
-#endif
-
-#if defined (vax)
-# if !defined (ultrix)
-# include <sys/param.h>
-# if defined (BSD)
-# if BSD == 43
- printf ("vax-dec-bsd4.3\n"); exit (0);
-# else
-# if BSD == 199006
- printf ("vax-dec-bsd4.3reno\n"); exit (0);
-# else
- printf ("vax-dec-bsd\n"); exit (0);
-# endif
-# endif
-# else
- printf ("vax-dec-bsd\n"); exit (0);
-# endif
-# else
- printf ("vax-dec-ultrix\n"); exit (0);
-# endif
-#endif
-
-#if defined (alliant) && defined (i860)
- printf ("i860-alliant-bsd\n"); exit (0);
-#endif
-
- exit (1);
-}
-EOF
-
-$CC_FOR_BUILD -o $dummy $dummy.c 2>/dev/null && SYSTEM_NAME=`$dummy` &&
- { echo "$SYSTEM_NAME"; exit; }
-
-# Apollos put the system type in the environment.
-
-test -d /usr/apollo && { echo ${ISP}-apollo-${SYSTYPE}; exit; }
-
-# Convex versions that predate uname can use getsysinfo(1)
-
-if [ -x /usr/convex/getsysinfo ]
-then
- case `getsysinfo -f cpu_type` in
- c1*)
- echo c1-convex-bsd
- exit ;;
- c2*)
- if getsysinfo -f scalar_acc
- then echo c32-convex-bsd
- else echo c2-convex-bsd
- fi
- exit ;;
- c34*)
- echo c34-convex-bsd
- exit ;;
- c38*)
- echo c38-convex-bsd
- exit ;;
- c4*)
- echo c4-convex-bsd
- exit ;;
- esac
-fi
-
-cat >&2 <<EOF
-$0: unable to guess system type
-
-This script, last modified $timestamp, has failed to recognize
-the operating system you are using. It is advised that you
-download the most up to date version of the config scripts from
-
- http://git.savannah.gnu.org/gitweb/?p=config.git;a=blob_plain;f=config.guess;hb=HEAD
-and
- http://git.savannah.gnu.org/gitweb/?p=config.git;a=blob_plain;f=config.sub;hb=HEAD
-
-If the version you run ($0) is already up to date, please
-send the following data and any information you think might be
-pertinent to <config-patches@gnu.org> in order to provide the needed
-information to handle your system.
-
-config.guess timestamp = $timestamp
-
-uname -m = `(uname -m) 2>/dev/null || echo unknown`
-uname -r = `(uname -r) 2>/dev/null || echo unknown`
-uname -s = `(uname -s) 2>/dev/null || echo unknown`
-uname -v = `(uname -v) 2>/dev/null || echo unknown`
-
-/usr/bin/uname -p = `(/usr/bin/uname -p) 2>/dev/null`
-/bin/uname -X = `(/bin/uname -X) 2>/dev/null`
-
-hostinfo = `(hostinfo) 2>/dev/null`
-/bin/universe = `(/bin/universe) 2>/dev/null`
-/usr/bin/arch -k = `(/usr/bin/arch -k) 2>/dev/null`
-/bin/arch = `(/bin/arch) 2>/dev/null`
-/usr/bin/oslevel = `(/usr/bin/oslevel) 2>/dev/null`
-/usr/convex/getsysinfo = `(/usr/convex/getsysinfo) 2>/dev/null`
-
-UNAME_MACHINE = ${UNAME_MACHINE}
-UNAME_RELEASE = ${UNAME_RELEASE}
-UNAME_SYSTEM = ${UNAME_SYSTEM}
-UNAME_VERSION = ${UNAME_VERSION}
-EOF
-
-exit 1
-
-# Local variables:
-# eval: (add-hook 'write-file-hooks 'time-stamp)
-# time-stamp-start: "timestamp='"
-# time-stamp-format: "%:y-%02m-%02d"
-# time-stamp-end: "'"
-# End:
diff --git a/Build/source/texk/web2c/luatexdir/zziplib/uses/config.sub b/Build/source/texk/web2c/luatexdir/zziplib/uses/config.sub
deleted file mode 100755
index a39437d0158..00000000000
--- a/Build/source/texk/web2c/luatexdir/zziplib/uses/config.sub
+++ /dev/null
@@ -1,1686 +0,0 @@
-#! /bin/sh
-# Configuration validation subroutine script.
-# Copyright (C) 1992, 1993, 1994, 1995, 1996, 1997, 1998, 1999,
-# 2000, 2001, 2002, 2003, 2004, 2005, 2006, 2007, 2008
-# Free Software Foundation, Inc.
-
-timestamp='2009-04-17'
-
-# This file is (in principle) common to ALL GNU software.
-# The presence of a machine in this file suggests that SOME GNU software
-# can handle that machine. It does not imply ALL GNU software can.
-#
-# This file is free software; you can redistribute it and/or modify
-# it under the terms of the GNU General Public License as published by
-# the Free Software Foundation; either version 2 of the License, or
-# (at your option) any later version.
-#
-# This program is distributed in the hope that it will be useful,
-# but WITHOUT ANY WARRANTY; without even the implied warranty of
-# MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
-# GNU General Public License for more details.
-#
-# You should have received a copy of the GNU General Public License
-# along with this program; if not, write to the Free Software
-# Foundation, Inc., 51 Franklin Street - Fifth Floor, Boston, MA
-# 02110-1301, USA.
-#
-# As a special exception to the GNU General Public License, if you
-# distribute this file as part of a program that contains a
-# configuration script generated by Autoconf, you may include it under
-# the same distribution terms that you use for the rest of that program.
-
-
-# Please send patches to <config-patches@gnu.org>. Submit a context
-# diff and a properly formatted ChangeLog entry.
-#
-# Configuration subroutine to validate and canonicalize a configuration type.
-# Supply the specified configuration type as an argument.
-# If it is invalid, we print an error message on stderr and exit with code 1.
-# Otherwise, we print the canonical config type on stdout and succeed.
-
-# This file is supposed to be the same for all GNU packages
-# and recognize all the CPU types, system types and aliases
-# that are meaningful with *any* GNU software.
-# Each package is responsible for reporting which valid configurations
-# it does not support. The user should be able to distinguish
-# a failure to support a valid configuration from a meaningless
-# configuration.
-
-# The goal of this file is to map all the various variations of a given
-# machine specification into a single specification in the form:
-# CPU_TYPE-MANUFACTURER-OPERATING_SYSTEM
-# or in some cases, the newer four-part form:
-# CPU_TYPE-MANUFACTURER-KERNEL-OPERATING_SYSTEM
-# It is wrong to echo any other type of specification.
-
-me=`echo "$0" | sed -e 's,.*/,,'`
-
-usage="\
-Usage: $0 [OPTION] CPU-MFR-OPSYS
- $0 [OPTION] ALIAS
-
-Canonicalize a configuration name.
-
-Operation modes:
- -h, --help print this help, then exit
- -t, --time-stamp print date of last modification, then exit
- -v, --version print version number, then exit
-
-Report bugs and patches to <config-patches@gnu.org>."
-
-version="\
-GNU config.sub ($timestamp)
-
-Copyright (C) 1992, 1993, 1994, 1995, 1996, 1997, 1998, 1999, 2000, 2001,
-2002, 2003, 2004, 2005, 2006, 2007, 2008 Free Software Foundation, Inc.
-
-This is free software; see the source for copying conditions. There is NO
-warranty; not even for MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE."
-
-help="
-Try \`$me --help' for more information."
-
-# Parse command line
-while test $# -gt 0 ; do
- case $1 in
- --time-stamp | --time* | -t )
- echo "$timestamp" ; exit ;;
- --version | -v )
- echo "$version" ; exit ;;
- --help | --h* | -h )
- echo "$usage"; exit ;;
- -- ) # Stop option processing
- shift; break ;;
- - ) # Use stdin as input.
- break ;;
- -* )
- echo "$me: invalid option $1$help"
- exit 1 ;;
-
- *local*)
- # First pass through any local machine types.
- echo $1
- exit ;;
-
- * )
- break ;;
- esac
-done
-
-case $# in
- 0) echo "$me: missing argument$help" >&2
- exit 1;;
- 1) ;;
- *) echo "$me: too many arguments$help" >&2
- exit 1;;
-esac
-
-# Separate what the user gave into CPU-COMPANY and OS or KERNEL-OS (if any).
-# Here we must recognize all the valid KERNEL-OS combinations.
-maybe_os=`echo $1 | sed 's/^\(.*\)-\([^-]*-[^-]*\)$/\2/'`
-case $maybe_os in
- nto-qnx* | linux-gnu* | linux-dietlibc | linux-newlib* | linux-uclibc* | \
- uclinux-uclibc* | uclinux-gnu* | kfreebsd*-gnu* | knetbsd*-gnu* | netbsd*-gnu* | \
- kopensolaris*-gnu* | \
- storm-chaos* | os2-emx* | rtmk-nova*)
- os=-$maybe_os
- basic_machine=`echo $1 | sed 's/^\(.*\)-\([^-]*-[^-]*\)$/\1/'`
- ;;
- *)
- basic_machine=`echo $1 | sed 's/-[^-]*$//'`
- if [ $basic_machine != $1 ]
- then os=`echo $1 | sed 's/.*-/-/'`
- else os=; fi
- ;;
-esac
-
-### Let's recognize common machines as not being operating systems so
-### that things like config.sub decstation-3100 work. We also
-### recognize some manufacturers as not being operating systems, so we
-### can provide default operating systems below.
-case $os in
- -sun*os*)
- # Prevent following clause from handling this invalid input.
- ;;
- -dec* | -mips* | -sequent* | -encore* | -pc532* | -sgi* | -sony* | \
- -att* | -7300* | -3300* | -delta* | -motorola* | -sun[234]* | \
- -unicom* | -ibm* | -next | -hp | -isi* | -apollo | -altos* | \
- -convergent* | -ncr* | -news | -32* | -3600* | -3100* | -hitachi* |\
- -c[123]* | -convex* | -sun | -crds | -omron* | -dg | -ultra | -tti* | \
- -harris | -dolphin | -highlevel | -gould | -cbm | -ns | -masscomp | \
- -apple | -axis | -knuth | -cray)
- os=
- basic_machine=$1
- ;;
- -sim | -cisco | -oki | -wec | -winbond)
- os=
- basic_machine=$1
- ;;
- -scout)
- ;;
- -wrs)
- os=-vxworks
- basic_machine=$1
- ;;
- -chorusos*)
- os=-chorusos
- basic_machine=$1
- ;;
- -chorusrdb)
- os=-chorusrdb
- basic_machine=$1
- ;;
- -hiux*)
- os=-hiuxwe2
- ;;
- -sco6)
- os=-sco5v6
- basic_machine=`echo $1 | sed -e 's/86-.*/86-pc/'`
- ;;
- -sco5)
- os=-sco3.2v5
- basic_machine=`echo $1 | sed -e 's/86-.*/86-pc/'`
- ;;
- -sco4)
- os=-sco3.2v4
- basic_machine=`echo $1 | sed -e 's/86-.*/86-pc/'`
- ;;
- -sco3.2.[4-9]*)
- os=`echo $os | sed -e 's/sco3.2./sco3.2v/'`
- basic_machine=`echo $1 | sed -e 's/86-.*/86-pc/'`
- ;;
- -sco3.2v[4-9]*)
- # Don't forget version if it is 3.2v4 or newer.
- basic_machine=`echo $1 | sed -e 's/86-.*/86-pc/'`
- ;;
- -sco5v6*)
- # Don't forget version if it is 3.2v4 or newer.
- basic_machine=`echo $1 | sed -e 's/86-.*/86-pc/'`
- ;;
- -sco*)
- os=-sco3.2v2
- basic_machine=`echo $1 | sed -e 's/86-.*/86-pc/'`
- ;;
- -udk*)
- basic_machine=`echo $1 | sed -e 's/86-.*/86-pc/'`
- ;;
- -isc)
- os=-isc2.2
- basic_machine=`echo $1 | sed -e 's/86-.*/86-pc/'`
- ;;
- -clix*)
- basic_machine=clipper-intergraph
- ;;
- -isc*)
- basic_machine=`echo $1 | sed -e 's/86-.*/86-pc/'`
- ;;
- -lynx*)
- os=-lynxos
- ;;
- -ptx*)
- basic_machine=`echo $1 | sed -e 's/86-.*/86-sequent/'`
- ;;
- -windowsnt*)
- os=`echo $os | sed -e 's/windowsnt/winnt/'`
- ;;
- -psos*)
- os=-psos
- ;;
- -mint | -mint[0-9]*)
- basic_machine=m68k-atari
- os=-mint
- ;;
-esac
-
-# Decode aliases for certain CPU-COMPANY combinations.
-case $basic_machine in
- # Recognize the basic CPU types without company name.
- # Some are omitted here because they have special meanings below.
- 1750a | 580 \
- | a29k \
- | alpha | alphaev[4-8] | alphaev56 | alphaev6[78] | alphapca5[67] \
- | alpha64 | alpha64ev[4-8] | alpha64ev56 | alpha64ev6[78] | alpha64pca5[67] \
- | am33_2.0 \
- | arc | arm | arm[bl]e | arme[lb] | armv[2345] | armv[345][lb] | avr | avr32 \
- | bfin \
- | c4x | clipper \
- | d10v | d30v | dlx | dsp16xx \
- | fido | fr30 | frv \
- | h8300 | h8500 | hppa | hppa1.[01] | hppa2.0 | hppa2.0[nw] | hppa64 \
- | i370 | i860 | i960 | ia64 \
- | ip2k | iq2000 \
- | lm32 \
- | m32c | m32r | m32rle | m68000 | m68k | m88k \
- | maxq | mb | microblaze | mcore | mep | metag \
- | mips | mipsbe | mipseb | mipsel | mipsle \
- | mips16 \
- | mips64 | mips64el \
- | mips64octeon | mips64octeonel \
- | mips64orion | mips64orionel \
- | mips64r5900 | mips64r5900el \
- | mips64vr | mips64vrel \
- | mips64vr4100 | mips64vr4100el \
- | mips64vr4300 | mips64vr4300el \
- | mips64vr5000 | mips64vr5000el \
- | mips64vr5900 | mips64vr5900el \
- | mipsisa32 | mipsisa32el \
- | mipsisa32r2 | mipsisa32r2el \
- | mipsisa64 | mipsisa64el \
- | mipsisa64r2 | mipsisa64r2el \
- | mipsisa64sb1 | mipsisa64sb1el \
- | mipsisa64sr71k | mipsisa64sr71kel \
- | mipstx39 | mipstx39el \
- | mn10200 | mn10300 \
- | moxie \
- | mt \
- | msp430 \
- | nios | nios2 \
- | ns16k | ns32k \
- | or32 \
- | pdp10 | pdp11 | pj | pjl \
- | powerpc | powerpc64 | powerpc64le | powerpcle | ppcbe \
- | pyramid \
- | score \
- | sh | sh[1234] | sh[24]a | sh[24]aeb | sh[23]e | sh[34]eb | sheb | shbe | shle | sh[1234]le | sh3ele \
- | sh64 | sh64le \
- | sparc | sparc64 | sparc64b | sparc64v | sparc86x | sparclet | sparclite \
- | sparcv8 | sparcv9 | sparcv9b | sparcv9v \
- | spu | strongarm \
- | tahoe | thumb | tic4x | tic80 | tron \
- | v850 | v850e \
- | we32k \
- | x86 | xc16x | xscale | xscalee[bl] | xstormy16 | xtensa \
- | z8k | z80)
- basic_machine=$basic_machine-unknown
- ;;
- m6811 | m68hc11 | m6812 | m68hc12)
- # Motorola 68HC11/12.
- basic_machine=$basic_machine-unknown
- os=-none
- ;;
- m88110 | m680[12346]0 | m683?2 | m68360 | m5200 | v70 | w65 | z8k)
- ;;
- ms1)
- basic_machine=mt-unknown
- ;;
-
- # We use `pc' rather than `unknown'
- # because (1) that's what they normally are, and
- # (2) the word "unknown" tends to confuse beginning users.
- i*86 | x86_64)
- basic_machine=$basic_machine-pc
- ;;
- # Object if more than one company name word.
- *-*-*)
- echo Invalid configuration \`$1\': machine \`$basic_machine\' not recognized 1>&2
- exit 1
- ;;
- # Recognize the basic CPU types with company name.
- 580-* \
- | a29k-* \
- | alpha-* | alphaev[4-8]-* | alphaev56-* | alphaev6[78]-* \
- | alpha64-* | alpha64ev[4-8]-* | alpha64ev56-* | alpha64ev6[78]-* \
- | alphapca5[67]-* | alpha64pca5[67]-* | arc-* \
- | arm-* | armbe-* | armle-* | armeb-* | armv*-* \
- | avr-* | avr32-* \
- | bfin-* | bs2000-* \
- | c[123]* | c30-* | [cjt]90-* | c4x-* | c54x-* | c55x-* | c6x-* \
- | clipper-* | craynv-* | cydra-* \
- | d10v-* | d30v-* | dlx-* \
- | elxsi-* \
- | f30[01]-* | f700-* | fido-* | fr30-* | frv-* | fx80-* \
- | h8300-* | h8500-* \
- | hppa-* | hppa1.[01]-* | hppa2.0-* | hppa2.0[nw]-* | hppa64-* \
- | i*86-* | i860-* | i960-* | ia64-* \
- | ip2k-* | iq2000-* \
- | lm32-* \
- | m32c-* | m32r-* | m32rle-* \
- | m68000-* | m680[012346]0-* | m68360-* | m683?2-* | m68k-* \
- | m88110-* | m88k-* | maxq-* | mcore-* | metag-* \
- | mips-* | mipsbe-* | mipseb-* | mipsel-* | mipsle-* \
- | mips16-* \
- | mips64-* | mips64el-* \
- | mips64octeon-* | mips64octeonel-* \
- | mips64orion-* | mips64orionel-* \
- | mips64r5900-* | mips64r5900el-* \
- | mips64vr-* | mips64vrel-* \
- | mips64vr4100-* | mips64vr4100el-* \
- | mips64vr4300-* | mips64vr4300el-* \
- | mips64vr5000-* | mips64vr5000el-* \
- | mips64vr5900-* | mips64vr5900el-* \
- | mipsisa32-* | mipsisa32el-* \
- | mipsisa32r2-* | mipsisa32r2el-* \
- | mipsisa64-* | mipsisa64el-* \
- | mipsisa64r2-* | mipsisa64r2el-* \
- | mipsisa64sb1-* | mipsisa64sb1el-* \
- | mipsisa64sr71k-* | mipsisa64sr71kel-* \
- | mipstx39-* | mipstx39el-* \
- | mmix-* \
- | mt-* \
- | msp430-* \
- | nios-* | nios2-* \
- | none-* | np1-* | ns16k-* | ns32k-* \
- | orion-* \
- | pdp10-* | pdp11-* | pj-* | pjl-* | pn-* | power-* \
- | powerpc-* | powerpc64-* | powerpc64le-* | powerpcle-* | ppcbe-* \
- | pyramid-* \
- | romp-* | rs6000-* \
- | sh-* | sh[1234]-* | sh[24]a-* | sh[24]aeb-* | sh[23]e-* | sh[34]eb-* | sheb-* | shbe-* \
- | shle-* | sh[1234]le-* | sh3ele-* | sh64-* | sh64le-* \
- | sparc-* | sparc64-* | sparc64b-* | sparc64v-* | sparc86x-* | sparclet-* \
- | sparclite-* \
- | sparcv8-* | sparcv9-* | sparcv9b-* | sparcv9v-* | strongarm-* | sv1-* | sx?-* \
- | tahoe-* | thumb-* \
- | tic30-* | tic4x-* | tic54x-* | tic55x-* | tic6x-* | tic80-* | tile-* \
- | tron-* \
- | v850-* | v850e-* | vax-* \
- | we32k-* \
- | x86-* | x86_64-* | xc16x-* | xps100-* | xscale-* | xscalee[bl]-* \
- | xstormy16-* | xtensa*-* \
- | ymp-* \
- | z8k-* | z80-*)
- ;;
- # Recognize the basic CPU types without company name, with glob match.
- xtensa*)
- basic_machine=$basic_machine-unknown
- ;;
- # Recognize the various machine names and aliases which stand
- # for a CPU type and a company and sometimes even an OS.
- 386bsd)
- basic_machine=i386-unknown
- os=-bsd
- ;;
- 3b1 | 7300 | 7300-att | att-7300 | pc7300 | safari | unixpc)
- basic_machine=m68000-att
- ;;
- 3b*)
- basic_machine=we32k-att
- ;;
- a29khif)
- basic_machine=a29k-amd
- os=-udi
- ;;
- abacus)
- basic_machine=abacus-unknown
- ;;
- adobe68k)
- basic_machine=m68010-adobe
- os=-scout
- ;;
- alliant | fx80)
- basic_machine=fx80-alliant
- ;;
- altos | altos3068)
- basic_machine=m68k-altos
- ;;
- am29k)
- basic_machine=a29k-none
- os=-bsd
- ;;
- amd64)
- basic_machine=x86_64-pc
- ;;
- amd64-*)
- basic_machine=x86_64-`echo $basic_machine | sed 's/^[^-]*-//'`
- ;;
- amdahl)
- basic_machine=580-amdahl
- os=-sysv
- ;;
- amiga | amiga-*)
- basic_machine=m68k-unknown
- ;;
- amigaos | amigados)
- basic_machine=m68k-unknown
- os=-amigaos
- ;;
- amigaunix | amix)
- basic_machine=m68k-unknown
- os=-sysv4
- ;;
- apollo68)
- basic_machine=m68k-apollo
- os=-sysv
- ;;
- apollo68bsd)
- basic_machine=m68k-apollo
- os=-bsd
- ;;
- aros)
- basic_machine=i386-pc
- os=-aros
- ;;
- aux)
- basic_machine=m68k-apple
- os=-aux
- ;;
- balance)
- basic_machine=ns32k-sequent
- os=-dynix
- ;;
- blackfin)
- basic_machine=bfin-unknown
- os=-linux
- ;;
- blackfin-*)
- basic_machine=bfin-`echo $basic_machine | sed 's/^[^-]*-//'`
- os=-linux
- ;;
- c90)
- basic_machine=c90-cray
- os=-unicos
- ;;
- cegcc)
- basic_machine=arm-unknown
- os=-cegcc
- ;;
- convex-c1)
- basic_machine=c1-convex
- os=-bsd
- ;;
- convex-c2)
- basic_machine=c2-convex
- os=-bsd
- ;;
- convex-c32)
- basic_machine=c32-convex
- os=-bsd
- ;;
- convex-c34)
- basic_machine=c34-convex
- os=-bsd
- ;;
- convex-c38)
- basic_machine=c38-convex
- os=-bsd
- ;;
- cray | j90)
- basic_machine=j90-cray
- os=-unicos
- ;;
- craynv)
- basic_machine=craynv-cray
- os=-unicosmp
- ;;
- cr16)
- basic_machine=cr16-unknown
- os=-elf
- ;;
- crds | unos)
- basic_machine=m68k-crds
- ;;
- crisv32 | crisv32-* | etraxfs*)
- basic_machine=crisv32-axis
- ;;
- cris | cris-* | etrax*)
- basic_machine=cris-axis
- ;;
- crx)
- basic_machine=crx-unknown
- os=-elf
- ;;
- da30 | da30-*)
- basic_machine=m68k-da30
- ;;
- decstation | decstation-3100 | pmax | pmax-* | pmin | dec3100 | decstatn)
- basic_machine=mips-dec
- ;;
- decsystem10* | dec10*)
- basic_machine=pdp10-dec
- os=-tops10
- ;;
- decsystem20* | dec20*)
- basic_machine=pdp10-dec
- os=-tops20
- ;;
- delta | 3300 | motorola-3300 | motorola-delta \
- | 3300-motorola | delta-motorola)
- basic_machine=m68k-motorola
- ;;
- delta88)
- basic_machine=m88k-motorola
- os=-sysv3
- ;;
- dicos)
- basic_machine=i686-pc
- os=-dicos
- ;;
- djgpp)
- basic_machine=i586-pc
- os=-msdosdjgpp
- ;;
- dpx20 | dpx20-*)
- basic_machine=rs6000-bull
- os=-bosx
- ;;
- dpx2* | dpx2*-bull)
- basic_machine=m68k-bull
- os=-sysv3
- ;;
- ebmon29k)
- basic_machine=a29k-amd
- os=-ebmon
- ;;
- elxsi)
- basic_machine=elxsi-elxsi
- os=-bsd
- ;;
- encore | umax | mmax)
- basic_machine=ns32k-encore
- ;;
- es1800 | OSE68k | ose68k | ose | OSE)
- basic_machine=m68k-ericsson
- os=-ose
- ;;
- fx2800)
- basic_machine=i860-alliant
- ;;
- genix)
- basic_machine=ns32k-ns
- ;;
- gmicro)
- basic_machine=tron-gmicro
- os=-sysv
- ;;
- go32)
- basic_machine=i386-pc
- os=-go32
- ;;
- h3050r* | hiux*)
- basic_machine=hppa1.1-hitachi
- os=-hiuxwe2
- ;;
- h8300hms)
- basic_machine=h8300-hitachi
- os=-hms
- ;;
- h8300xray)
- basic_machine=h8300-hitachi
- os=-xray
- ;;
- h8500hms)
- basic_machine=h8500-hitachi
- os=-hms
- ;;
- harris)
- basic_machine=m88k-harris
- os=-sysv3
- ;;
- hp300-*)
- basic_machine=m68k-hp
- ;;
- hp300bsd)
- basic_machine=m68k-hp
- os=-bsd
- ;;
- hp300hpux)
- basic_machine=m68k-hp
- os=-hpux
- ;;
- hp3k9[0-9][0-9] | hp9[0-9][0-9])
- basic_machine=hppa1.0-hp
- ;;
- hp9k2[0-9][0-9] | hp9k31[0-9])
- basic_machine=m68000-hp
- ;;
- hp9k3[2-9][0-9])
- basic_machine=m68k-hp
- ;;
- hp9k6[0-9][0-9] | hp6[0-9][0-9])
- basic_machine=hppa1.0-hp
- ;;
- hp9k7[0-79][0-9] | hp7[0-79][0-9])
- basic_machine=hppa1.1-hp
- ;;
- hp9k78[0-9] | hp78[0-9])
- # FIXME: really hppa2.0-hp
- basic_machine=hppa1.1-hp
- ;;
- hp9k8[67]1 | hp8[67]1 | hp9k80[24] | hp80[24] | hp9k8[78]9 | hp8[78]9 | hp9k893 | hp893)
- # FIXME: really hppa2.0-hp
- basic_machine=hppa1.1-hp
- ;;
- hp9k8[0-9][13679] | hp8[0-9][13679])
- basic_machine=hppa1.1-hp
- ;;
- hp9k8[0-9][0-9] | hp8[0-9][0-9])
- basic_machine=hppa1.0-hp
- ;;
- hppa-next)
- os=-nextstep3
- ;;
- hppaosf)
- basic_machine=hppa1.1-hp
- os=-osf
- ;;
- hppro)
- basic_machine=hppa1.1-hp
- os=-proelf
- ;;
- i370-ibm* | ibm*)
- basic_machine=i370-ibm
- ;;
-# I'm not sure what "Sysv32" means. Should this be sysv3.2?
- i*86v32)
- basic_machine=`echo $1 | sed -e 's/86.*/86-pc/'`
- os=-sysv32
- ;;
- i*86v4*)
- basic_machine=`echo $1 | sed -e 's/86.*/86-pc/'`
- os=-sysv4
- ;;
- i*86v)
- basic_machine=`echo $1 | sed -e 's/86.*/86-pc/'`
- os=-sysv
- ;;
- i*86sol2)
- basic_machine=`echo $1 | sed -e 's/86.*/86-pc/'`
- os=-solaris2
- ;;
- i386mach)
- basic_machine=i386-mach
- os=-mach
- ;;
- i386-vsta | vsta)
- basic_machine=i386-unknown
- os=-vsta
- ;;
- iris | iris4d)
- basic_machine=mips-sgi
- case $os in
- -irix*)
- ;;
- *)
- os=-irix4
- ;;
- esac
- ;;
- isi68 | isi)
- basic_machine=m68k-isi
- os=-sysv
- ;;
- m68knommu)
- basic_machine=m68k-unknown
- os=-linux
- ;;
- m68knommu-*)
- basic_machine=m68k-`echo $basic_machine | sed 's/^[^-]*-//'`
- os=-linux
- ;;
- m88k-omron*)
- basic_machine=m88k-omron
- ;;
- magnum | m3230)
- basic_machine=mips-mips
- os=-sysv
- ;;
- merlin)
- basic_machine=ns32k-utek
- os=-sysv
- ;;
- mingw32)
- basic_machine=i386-pc
- os=-mingw32
- ;;
- mingw32ce)
- basic_machine=arm-unknown
- os=-mingw32ce
- ;;
- miniframe)
- basic_machine=m68000-convergent
- ;;
- *mint | -mint[0-9]* | *MiNT | *MiNT[0-9]*)
- basic_machine=m68k-atari
- os=-mint
- ;;
- mips3*-*)
- basic_machine=`echo $basic_machine | sed -e 's/mips3/mips64/'`
- ;;
- mips3*)
- basic_machine=`echo $basic_machine | sed -e 's/mips3/mips64/'`-unknown
- ;;
- monitor)
- basic_machine=m68k-rom68k
- os=-coff
- ;;
- morphos)
- basic_machine=powerpc-unknown
- os=-morphos
- ;;
- msdos)
- basic_machine=i386-pc
- os=-msdos
- ;;
- ms1-*)
- basic_machine=`echo $basic_machine | sed -e 's/ms1-/mt-/'`
- ;;
- mvs)
- basic_machine=i370-ibm
- os=-mvs
- ;;
- ncr3000)
- basic_machine=i486-ncr
- os=-sysv4
- ;;
- netbsd386)
- basic_machine=i386-unknown
- os=-netbsd
- ;;
- netwinder)
- basic_machine=armv4l-rebel
- os=-linux
- ;;
- news | news700 | news800 | news900)
- basic_machine=m68k-sony
- os=-newsos
- ;;
- news1000)
- basic_machine=m68030-sony
- os=-newsos
- ;;
- news-3600 | risc-news)
- basic_machine=mips-sony
- os=-newsos
- ;;
- necv70)
- basic_machine=v70-nec
- os=-sysv
- ;;
- next | m*-next )
- basic_machine=m68k-next
- case $os in
- -nextstep* )
- ;;
- -ns2*)
- os=-nextstep2
- ;;
- *)
- os=-nextstep3
- ;;
- esac
- ;;
- nh3000)
- basic_machine=m68k-harris
- os=-cxux
- ;;
- nh[45]000)
- basic_machine=m88k-harris
- os=-cxux
- ;;
- nindy960)
- basic_machine=i960-intel
- os=-nindy
- ;;
- mon960)
- basic_machine=i960-intel
- os=-mon960
- ;;
- nonstopux)
- basic_machine=mips-compaq
- os=-nonstopux
- ;;
- np1)
- basic_machine=np1-gould
- ;;
- nsr-tandem)
- basic_machine=nsr-tandem
- ;;
- op50n-* | op60c-*)
- basic_machine=hppa1.1-oki
- os=-proelf
- ;;
- openrisc | openrisc-*)
- basic_machine=or32-unknown
- ;;
- os400)
- basic_machine=powerpc-ibm
- os=-os400
- ;;
- OSE68000 | ose68000)
- basic_machine=m68000-ericsson
- os=-ose
- ;;
- os68k)
- basic_machine=m68k-none
- os=-os68k
- ;;
- pa-hitachi)
- basic_machine=hppa1.1-hitachi
- os=-hiuxwe2
- ;;
- paragon)
- basic_machine=i860-intel
- os=-osf
- ;;
- parisc)
- basic_machine=hppa-unknown
- os=-linux
- ;;
- parisc-*)
- basic_machine=hppa-`echo $basic_machine | sed 's/^[^-]*-//'`
- os=-linux
- ;;
- pbd)
- basic_machine=sparc-tti
- ;;
- pbb)
- basic_machine=m68k-tti
- ;;
- pc532 | pc532-*)
- basic_machine=ns32k-pc532
- ;;
- pc98)
- basic_machine=i386-pc
- ;;
- pc98-*)
- basic_machine=i386-`echo $basic_machine | sed 's/^[^-]*-//'`
- ;;
- pentium | p5 | k5 | k6 | nexgen | viac3)
- basic_machine=i586-pc
- ;;
- pentiumpro | p6 | 6x86 | athlon | athlon_*)
- basic_machine=i686-pc
- ;;
- pentiumii | pentium2 | pentiumiii | pentium3)
- basic_machine=i686-pc
- ;;
- pentium4)
- basic_machine=i786-pc
- ;;
- pentium-* | p5-* | k5-* | k6-* | nexgen-* | viac3-*)
- basic_machine=i586-`echo $basic_machine | sed 's/^[^-]*-//'`
- ;;
- pentiumpro-* | p6-* | 6x86-* | athlon-*)
- basic_machine=i686-`echo $basic_machine | sed 's/^[^-]*-//'`
- ;;
- pentiumii-* | pentium2-* | pentiumiii-* | pentium3-*)
- basic_machine=i686-`echo $basic_machine | sed 's/^[^-]*-//'`
- ;;
- pentium4-*)
- basic_machine=i786-`echo $basic_machine | sed 's/^[^-]*-//'`
- ;;
- pn)
- basic_machine=pn-gould
- ;;
- power) basic_machine=power-ibm
- ;;
- ppc) basic_machine=powerpc-unknown
- ;;
- ppc-*) basic_machine=powerpc-`echo $basic_machine | sed 's/^[^-]*-//'`
- ;;
- ppcle | powerpclittle | ppc-le | powerpc-little)
- basic_machine=powerpcle-unknown
- ;;
- ppcle-* | powerpclittle-*)
- basic_machine=powerpcle-`echo $basic_machine | sed 's/^[^-]*-//'`
- ;;
- ppc64) basic_machine=powerpc64-unknown
- ;;
- ppc64-*) basic_machine=powerpc64-`echo $basic_machine | sed 's/^[^-]*-//'`
- ;;
- ppc64le | powerpc64little | ppc64-le | powerpc64-little)
- basic_machine=powerpc64le-unknown
- ;;
- ppc64le-* | powerpc64little-*)
- basic_machine=powerpc64le-`echo $basic_machine | sed 's/^[^-]*-//'`
- ;;
- ps2)
- basic_machine=i386-ibm
- ;;
- pw32)
- basic_machine=i586-unknown
- os=-pw32
- ;;
- rdos)
- basic_machine=i386-pc
- os=-rdos
- ;;
- rom68k)
- basic_machine=m68k-rom68k
- os=-coff
- ;;
- rm[46]00)
- basic_machine=mips-siemens
- ;;
- rtpc | rtpc-*)
- basic_machine=romp-ibm
- ;;
- s390 | s390-*)
- basic_machine=s390-ibm
- ;;
- s390x | s390x-*)
- basic_machine=s390x-ibm
- ;;
- sa29200)
- basic_machine=a29k-amd
- os=-udi
- ;;
- sb1)
- basic_machine=mipsisa64sb1-unknown
- ;;
- sb1el)
- basic_machine=mipsisa64sb1el-unknown
- ;;
- sde)
- basic_machine=mipsisa32-sde
- os=-elf
- ;;
- sei)
- basic_machine=mips-sei
- os=-seiux
- ;;
- sequent)
- basic_machine=i386-sequent
- ;;
- sh)
- basic_machine=sh-hitachi
- os=-hms
- ;;
- sh5el)
- basic_machine=sh5le-unknown
- ;;
- sh64)
- basic_machine=sh64-unknown
- ;;
- sparclite-wrs | simso-wrs)
- basic_machine=sparclite-wrs
- os=-vxworks
- ;;
- sps7)
- basic_machine=m68k-bull
- os=-sysv2
- ;;
- spur)
- basic_machine=spur-unknown
- ;;
- st2000)
- basic_machine=m68k-tandem
- ;;
- stratus)
- basic_machine=i860-stratus
- os=-sysv4
- ;;
- sun2)
- basic_machine=m68000-sun
- ;;
- sun2os3)
- basic_machine=m68000-sun
- os=-sunos3
- ;;
- sun2os4)
- basic_machine=m68000-sun
- os=-sunos4
- ;;
- sun3os3)
- basic_machine=m68k-sun
- os=-sunos3
- ;;
- sun3os4)
- basic_machine=m68k-sun
- os=-sunos4
- ;;
- sun4os3)
- basic_machine=sparc-sun
- os=-sunos3
- ;;
- sun4os4)
- basic_machine=sparc-sun
- os=-sunos4
- ;;
- sun4sol2)
- basic_machine=sparc-sun
- os=-solaris2
- ;;
- sun3 | sun3-*)
- basic_machine=m68k-sun
- ;;
- sun4)
- basic_machine=sparc-sun
- ;;
- sun386 | sun386i | roadrunner)
- basic_machine=i386-sun
- ;;
- sv1)
- basic_machine=sv1-cray
- os=-unicos
- ;;
- symmetry)
- basic_machine=i386-sequent
- os=-dynix
- ;;
- t3e)
- basic_machine=alphaev5-cray
- os=-unicos
- ;;
- t90)
- basic_machine=t90-cray
- os=-unicos
- ;;
- tic54x | c54x*)
- basic_machine=tic54x-unknown
- os=-coff
- ;;
- tic55x | c55x*)
- basic_machine=tic55x-unknown
- os=-coff
- ;;
- tic6x | c6x*)
- basic_machine=tic6x-unknown
- os=-coff
- ;;
- tile*)
- basic_machine=tile-unknown
- os=-linux-gnu
- ;;
- tx39)
- basic_machine=mipstx39-unknown
- ;;
- tx39el)
- basic_machine=mipstx39el-unknown
- ;;
- toad1)
- basic_machine=pdp10-xkl
- os=-tops20
- ;;
- tower | tower-32)
- basic_machine=m68k-ncr
- ;;
- tpf)
- basic_machine=s390x-ibm
- os=-tpf
- ;;
- udi29k)
- basic_machine=a29k-amd
- os=-udi
- ;;
- ultra3)
- basic_machine=a29k-nyu
- os=-sym1
- ;;
- v810 | necv810)
- basic_machine=v810-nec
- os=-none
- ;;
- vaxv)
- basic_machine=vax-dec
- os=-sysv
- ;;
- vms)
- basic_machine=vax-dec
- os=-vms
- ;;
- vpp*|vx|vx-*)
- basic_machine=f301-fujitsu
- ;;
- vxworks960)
- basic_machine=i960-wrs
- os=-vxworks
- ;;
- vxworks68)
- basic_machine=m68k-wrs
- os=-vxworks
- ;;
- vxworks29k)
- basic_machine=a29k-wrs
- os=-vxworks
- ;;
- w65*)
- basic_machine=w65-wdc
- os=-none
- ;;
- w89k-*)
- basic_machine=hppa1.1-winbond
- os=-proelf
- ;;
- xbox)
- basic_machine=i686-pc
- os=-mingw32
- ;;
- xps | xps100)
- basic_machine=xps100-honeywell
- ;;
- ymp)
- basic_machine=ymp-cray
- os=-unicos
- ;;
- z8k-*-coff)
- basic_machine=z8k-unknown
- os=-sim
- ;;
- z80-*-coff)
- basic_machine=z80-unknown
- os=-sim
- ;;
- none)
- basic_machine=none-none
- os=-none
- ;;
-
-# Here we handle the default manufacturer of certain CPU types. It is in
-# some cases the only manufacturer, in others, it is the most popular.
- w89k)
- basic_machine=hppa1.1-winbond
- ;;
- op50n)
- basic_machine=hppa1.1-oki
- ;;
- op60c)
- basic_machine=hppa1.1-oki
- ;;
- romp)
- basic_machine=romp-ibm
- ;;
- mmix)
- basic_machine=mmix-knuth
- ;;
- rs6000)
- basic_machine=rs6000-ibm
- ;;
- vax)
- basic_machine=vax-dec
- ;;
- pdp10)
- # there are many clones, so DEC is not a safe bet
- basic_machine=pdp10-unknown
- ;;
- pdp11)
- basic_machine=pdp11-dec
- ;;
- we32k)
- basic_machine=we32k-att
- ;;
- sh[1234] | sh[24]a | sh[24]aeb | sh[34]eb | sh[1234]le | sh[23]ele)
- basic_machine=sh-unknown
- ;;
- sparc | sparcv8 | sparcv9 | sparcv9b | sparcv9v)
- basic_machine=sparc-sun
- ;;
- cydra)
- basic_machine=cydra-cydrome
- ;;
- orion)
- basic_machine=orion-highlevel
- ;;
- orion105)
- basic_machine=clipper-highlevel
- ;;
- mac | mpw | mac-mpw)
- basic_machine=m68k-apple
- ;;
- pmac | pmac-mpw)
- basic_machine=powerpc-apple
- ;;
- *-unknown)
- # Make sure to match an already-canonicalized machine name.
- ;;
- *)
- echo Invalid configuration \`$1\': machine \`$basic_machine\' not recognized 1>&2
- exit 1
- ;;
-esac
-
-# Here we canonicalize certain aliases for manufacturers.
-case $basic_machine in
- *-digital*)
- basic_machine=`echo $basic_machine | sed 's/digital.*/dec/'`
- ;;
- *-commodore*)
- basic_machine=`echo $basic_machine | sed 's/commodore.*/cbm/'`
- ;;
- *)
- ;;
-esac
-
-# Decode manufacturer-specific aliases for certain operating systems.
-
-if [ x"$os" != x"" ]
-then
-case $os in
- # First match some system type aliases
- # that might get confused with valid system types.
- # -solaris* is a basic system type, with this one exception.
- -solaris1 | -solaris1.*)
- os=`echo $os | sed -e 's|solaris1|sunos4|'`
- ;;
- -solaris)
- os=-solaris2
- ;;
- -svr4*)
- os=-sysv4
- ;;
- -unixware*)
- os=-sysv4.2uw
- ;;
- -gnu/linux*)
- os=`echo $os | sed -e 's|gnu/linux|linux-gnu|'`
- ;;
- # First accept the basic system types.
- # The portable systems comes first.
- # Each alternative MUST END IN A *, to match a version number.
- # -sysv* is not here because it comes later, after sysvr4.
- -gnu* | -bsd* | -mach* | -minix* | -genix* | -ultrix* | -irix* \
- | -*vms* | -sco* | -esix* | -isc* | -aix* | -sunos | -sunos[34]*\
- | -hpux* | -unos* | -osf* | -luna* | -dgux* | -solaris* | -sym* \
- | -kopensolaris* \
- | -amigaos* | -amigados* | -msdos* | -newsos* | -unicos* | -aof* \
- | -aos* | -aros* \
- | -nindy* | -vxsim* | -vxworks* | -ebmon* | -hms* | -mvs* \
- | -clix* | -riscos* | -uniplus* | -iris* | -rtu* | -xenix* \
- | -hiux* | -386bsd* | -knetbsd* | -mirbsd* | -netbsd* \
- | -openbsd* | -solidbsd* \
- | -ekkobsd* | -kfreebsd* | -freebsd* | -riscix* | -lynxos* \
- | -bosx* | -nextstep* | -cxux* | -aout* | -elf* | -oabi* \
- | -ptx* | -coff* | -ecoff* | -winnt* | -domain* | -vsta* \
- | -udi* | -eabi* | -lites* | -ieee* | -go32* | -aux* \
- | -chorusos* | -chorusrdb* | -cegcc* \
- | -cygwin* | -pe* | -psos* | -moss* | -proelf* | -rtems* \
- | -mingw32* | -linux-gnu* | -linux-newlib* | -linux-uclibc* \
- | -uxpv* | -beos* | -mpeix* | -udk* \
- | -interix* | -uwin* | -mks* | -rhapsody* | -darwin* | -opened* \
- | -openstep* | -oskit* | -conix* | -pw32* | -nonstopux* \
- | -storm-chaos* | -tops10* | -tenex* | -tops20* | -its* \
- | -os2* | -vos* | -palmos* | -uclinux* | -nucleus* \
- | -morphos* | -superux* | -rtmk* | -rtmk-nova* | -windiss* \
- | -powermax* | -dnix* | -nx6 | -nx7 | -sei* | -dragonfly* \
- | -skyos* | -haiku* | -rdos* | -toppers* | -drops*)
- # Remember, each alternative MUST END IN *, to match a version number.
- ;;
- -qnx*)
- case $basic_machine in
- x86-* | i*86-*)
- ;;
- *)
- os=-nto$os
- ;;
- esac
- ;;
- -nto-qnx*)
- ;;
- -nto*)
- os=`echo $os | sed -e 's|nto|nto-qnx|'`
- ;;
- -sim | -es1800* | -hms* | -xray | -os68k* | -none* | -v88r* \
- | -windows* | -osx | -abug | -netware* | -os9* | -beos* | -haiku* \
- | -macos* | -mpw* | -magic* | -mmixware* | -mon960* | -lnews*)
- ;;
- -mac*)
- os=`echo $os | sed -e 's|mac|macos|'`
- ;;
- -linux-dietlibc)
- os=-linux-dietlibc
- ;;
- -linux*)
- os=`echo $os | sed -e 's|linux|linux-gnu|'`
- ;;
- -sunos5*)
- os=`echo $os | sed -e 's|sunos5|solaris2|'`
- ;;
- -sunos6*)
- os=`echo $os | sed -e 's|sunos6|solaris3|'`
- ;;
- -opened*)
- os=-openedition
- ;;
- -os400*)
- os=-os400
- ;;
- -wince*)
- os=-wince
- ;;
- -osfrose*)
- os=-osfrose
- ;;
- -osf*)
- os=-osf
- ;;
- -utek*)
- os=-bsd
- ;;
- -dynix*)
- os=-bsd
- ;;
- -acis*)
- os=-aos
- ;;
- -atheos*)
- os=-atheos
- ;;
- -syllable*)
- os=-syllable
- ;;
- -386bsd)
- os=-bsd
- ;;
- -ctix* | -uts*)
- os=-sysv
- ;;
- -nova*)
- os=-rtmk-nova
- ;;
- -ns2 )
- os=-nextstep2
- ;;
- -nsk*)
- os=-nsk
- ;;
- # Preserve the version number of sinix5.
- -sinix5.*)
- os=`echo $os | sed -e 's|sinix|sysv|'`
- ;;
- -sinix*)
- os=-sysv4
- ;;
- -tpf*)
- os=-tpf
- ;;
- -triton*)
- os=-sysv3
- ;;
- -oss*)
- os=-sysv3
- ;;
- -svr4)
- os=-sysv4
- ;;
- -svr3)
- os=-sysv3
- ;;
- -sysvr4)
- os=-sysv4
- ;;
- # This must come after -sysvr4.
- -sysv*)
- ;;
- -ose*)
- os=-ose
- ;;
- -es1800*)
- os=-ose
- ;;
- -xenix)
- os=-xenix
- ;;
- -*mint | -mint[0-9]* | -*MiNT | -MiNT[0-9]*)
- os=-mint
- ;;
- -aros*)
- os=-aros
- ;;
- -kaos*)
- os=-kaos
- ;;
- -zvmoe)
- os=-zvmoe
- ;;
- -dicos*)
- os=-dicos
- ;;
- -none)
- ;;
- *)
- # Get rid of the `-' at the beginning of $os.
- os=`echo $os | sed 's/[^-]*-//'`
- echo Invalid configuration \`$1\': system \`$os\' not recognized 1>&2
- exit 1
- ;;
-esac
-else
-
-# Here we handle the default operating systems that come with various machines.
-# The value should be what the vendor currently ships out the door with their
-# machine or put another way, the most popular os provided with the machine.
-
-# Note that if you're going to try to match "-MANUFACTURER" here (say,
-# "-sun"), then you have to tell the case statement up towards the top
-# that MANUFACTURER isn't an operating system. Otherwise, code above
-# will signal an error saying that MANUFACTURER isn't an operating
-# system, and we'll never get to this point.
-
-case $basic_machine in
- score-*)
- os=-elf
- ;;
- spu-*)
- os=-elf
- ;;
- *-acorn)
- os=-riscix1.2
- ;;
- arm*-rebel)
- os=-linux
- ;;
- arm*-semi)
- os=-aout
- ;;
- c4x-* | tic4x-*)
- os=-coff
- ;;
- # This must come before the *-dec entry.
- pdp10-*)
- os=-tops20
- ;;
- pdp11-*)
- os=-none
- ;;
- *-dec | vax-*)
- os=-ultrix4.2
- ;;
- m68*-apollo)
- os=-domain
- ;;
- i386-sun)
- os=-sunos4.0.2
- ;;
- m68000-sun)
- os=-sunos3
- # This also exists in the configure program, but was not the
- # default.
- # os=-sunos4
- ;;
- m68*-cisco)
- os=-aout
- ;;
- mep-*)
- os=-elf
- ;;
- mips*-cisco)
- os=-elf
- ;;
- mips*-*)
- os=-elf
- ;;
- or32-*)
- os=-coff
- ;;
- *-tti) # must be before sparc entry or we get the wrong os.
- os=-sysv3
- ;;
- sparc-* | *-sun)
- os=-sunos4.1.1
- ;;
- *-be)
- os=-beos
- ;;
- *-haiku)
- os=-haiku
- ;;
- *-ibm)
- os=-aix
- ;;
- *-knuth)
- os=-mmixware
- ;;
- *-wec)
- os=-proelf
- ;;
- *-winbond)
- os=-proelf
- ;;
- *-oki)
- os=-proelf
- ;;
- *-hp)
- os=-hpux
- ;;
- *-hitachi)
- os=-hiux
- ;;
- i860-* | *-att | *-ncr | *-altos | *-motorola | *-convergent)
- os=-sysv
- ;;
- *-cbm)
- os=-amigaos
- ;;
- *-dg)
- os=-dgux
- ;;
- *-dolphin)
- os=-sysv3
- ;;
- m68k-ccur)
- os=-rtu
- ;;
- m88k-omron*)
- os=-luna
- ;;
- *-next )
- os=-nextstep
- ;;
- *-sequent)
- os=-ptx
- ;;
- *-crds)
- os=-unos
- ;;
- *-ns)
- os=-genix
- ;;
- i370-*)
- os=-mvs
- ;;
- *-next)
- os=-nextstep3
- ;;
- *-gould)
- os=-sysv
- ;;
- *-highlevel)
- os=-bsd
- ;;
- *-encore)
- os=-bsd
- ;;
- *-sgi)
- os=-irix
- ;;
- *-siemens)
- os=-sysv4
- ;;
- *-masscomp)
- os=-rtu
- ;;
- f30[01]-fujitsu | f700-fujitsu)
- os=-uxpv
- ;;
- *-rom68k)
- os=-coff
- ;;
- *-*bug)
- os=-coff
- ;;
- *-apple)
- os=-macos
- ;;
- *-atari*)
- os=-mint
- ;;
- *)
- os=-none
- ;;
-esac
-fi
-
-# Here we handle the case where we know the os, and the CPU type, but not the
-# manufacturer. We pick the logical manufacturer.
-vendor=unknown
-case $basic_machine in
- *-unknown)
- case $os in
- -riscix*)
- vendor=acorn
- ;;
- -sunos*)
- vendor=sun
- ;;
- -aix*)
- vendor=ibm
- ;;
- -beos*)
- vendor=be
- ;;
- -hpux*)
- vendor=hp
- ;;
- -mpeix*)
- vendor=hp
- ;;
- -hiux*)
- vendor=hitachi
- ;;
- -unos*)
- vendor=crds
- ;;
- -dgux*)
- vendor=dg
- ;;
- -luna*)
- vendor=omron
- ;;
- -genix*)
- vendor=ns
- ;;
- -mvs* | -opened*)
- vendor=ibm
- ;;
- -os400*)
- vendor=ibm
- ;;
- -ptx*)
- vendor=sequent
- ;;
- -tpf*)
- vendor=ibm
- ;;
- -vxsim* | -vxworks* | -windiss*)
- vendor=wrs
- ;;
- -aux*)
- vendor=apple
- ;;
- -hms*)
- vendor=hitachi
- ;;
- -mpw* | -macos*)
- vendor=apple
- ;;
- -*mint | -mint[0-9]* | -*MiNT | -MiNT[0-9]*)
- vendor=atari
- ;;
- -vos*)
- vendor=stratus
- ;;
- esac
- basic_machine=`echo $basic_machine | sed "s/unknown/$vendor/"`
- ;;
-esac
-
-echo $basic_machine$os
-exit
-
-# Local variables:
-# eval: (add-hook 'write-file-hooks 'time-stamp)
-# time-stamp-start: "timestamp='"
-# time-stamp-format: "%:y-%02m-%02d"
-# time-stamp-end: "'"
-# End:
diff --git a/Build/source/texk/web2c/luatexdir/zziplib/uses/depcomp b/Build/source/texk/web2c/luatexdir/zziplib/uses/depcomp
deleted file mode 100755
index df8eea7e4ce..00000000000
--- a/Build/source/texk/web2c/luatexdir/zziplib/uses/depcomp
+++ /dev/null
@@ -1,630 +0,0 @@
-#! /bin/sh
-# depcomp - compile a program generating dependencies as side-effects
-
-scriptversion=2009-04-28.21; # UTC
-
-# Copyright (C) 1999, 2000, 2003, 2004, 2005, 2006, 2007, 2009 Free
-# Software Foundation, Inc.
-
-# This program is free software; you can redistribute it and/or modify
-# it under the terms of the GNU General Public License as published by
-# the Free Software Foundation; either version 2, or (at your option)
-# any later version.
-
-# This program is distributed in the hope that it will be useful,
-# but WITHOUT ANY WARRANTY; without even the implied warranty of
-# MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
-# GNU General Public License for more details.
-
-# You should have received a copy of the GNU General Public License
-# along with this program. If not, see <http://www.gnu.org/licenses/>.
-
-# As a special exception to the GNU General Public License, if you
-# distribute this file as part of a program that contains a
-# configuration script generated by Autoconf, you may include it under
-# the same distribution terms that you use for the rest of that program.
-
-# Originally written by Alexandre Oliva <oliva@dcc.unicamp.br>.
-
-case $1 in
- '')
- echo "$0: No command. Try \`$0 --help' for more information." 1>&2
- exit 1;
- ;;
- -h | --h*)
- cat <<\EOF
-Usage: depcomp [--help] [--version] PROGRAM [ARGS]
-
-Run PROGRAMS ARGS to compile a file, generating dependencies
-as side-effects.
-
-Environment variables:
- depmode Dependency tracking mode.
- source Source file read by `PROGRAMS ARGS'.
- object Object file output by `PROGRAMS ARGS'.
- DEPDIR directory where to store dependencies.
- depfile Dependency file to output.
- tmpdepfile Temporary file to use when outputing dependencies.
- libtool Whether libtool is used (yes/no).
-
-Report bugs to <bug-automake@gnu.org>.
-EOF
- exit $?
- ;;
- -v | --v*)
- echo "depcomp $scriptversion"
- exit $?
- ;;
-esac
-
-if test -z "$depmode" || test -z "$source" || test -z "$object"; then
- echo "depcomp: Variables source, object and depmode must be set" 1>&2
- exit 1
-fi
-
-# Dependencies for sub/bar.o or sub/bar.obj go into sub/.deps/bar.Po.
-depfile=${depfile-`echo "$object" |
- sed 's|[^\\/]*$|'${DEPDIR-.deps}'/&|;s|\.\([^.]*\)$|.P\1|;s|Pobj$|Po|'`}
-tmpdepfile=${tmpdepfile-`echo "$depfile" | sed 's/\.\([^.]*\)$/.T\1/'`}
-
-rm -f "$tmpdepfile"
-
-# Some modes work just like other modes, but use different flags. We
-# parameterize here, but still list the modes in the big case below,
-# to make depend.m4 easier to write. Note that we *cannot* use a case
-# here, because this file can only contain one case statement.
-if test "$depmode" = hp; then
- # HP compiler uses -M and no extra arg.
- gccflag=-M
- depmode=gcc
-fi
-
-if test "$depmode" = dashXmstdout; then
- # This is just like dashmstdout with a different argument.
- dashmflag=-xM
- depmode=dashmstdout
-fi
-
-cygpath_u="cygpath -u -f -"
-if test "$depmode" = msvcmsys; then
- # This is just like msvisualcpp but w/o cygpath translation.
- # Just convert the backslash-escaped backslashes to single forward
- # slashes to satisfy depend.m4
- cygpath_u="sed s,\\\\\\\\,/,g"
- depmode=msvisualcpp
-fi
-
-case "$depmode" in
-gcc3)
-## gcc 3 implements dependency tracking that does exactly what
-## we want. Yay! Note: for some reason libtool 1.4 doesn't like
-## it if -MD -MP comes after the -MF stuff. Hmm.
-## Unfortunately, FreeBSD c89 acceptance of flags depends upon
-## the command line argument order; so add the flags where they
-## appear in depend2.am. Note that the slowdown incurred here
-## affects only configure: in makefiles, %FASTDEP% shortcuts this.
- for arg
- do
- case $arg in
- -c) set fnord "$@" -MT "$object" -MD -MP -MF "$tmpdepfile" "$arg" ;;
- *) set fnord "$@" "$arg" ;;
- esac
- shift # fnord
- shift # $arg
- done
- "$@"
- stat=$?
- if test $stat -eq 0; then :
- else
- rm -f "$tmpdepfile"
- exit $stat
- fi
- mv "$tmpdepfile" "$depfile"
- ;;
-
-gcc)
-## There are various ways to get dependency output from gcc. Here's
-## why we pick this rather obscure method:
-## - Don't want to use -MD because we'd like the dependencies to end
-## up in a subdir. Having to rename by hand is ugly.
-## (We might end up doing this anyway to support other compilers.)
-## - The DEPENDENCIES_OUTPUT environment variable makes gcc act like
-## -MM, not -M (despite what the docs say).
-## - Using -M directly means running the compiler twice (even worse
-## than renaming).
- if test -z "$gccflag"; then
- gccflag=-MD,
- fi
- "$@" -Wp,"$gccflag$tmpdepfile"
- stat=$?
- if test $stat -eq 0; then :
- else
- rm -f "$tmpdepfile"
- exit $stat
- fi
- rm -f "$depfile"
- echo "$object : \\" > "$depfile"
- alpha=ABCDEFGHIJKLMNOPQRSTUVWXYZabcdefghijklmnopqrstuvwxyz
-## The second -e expression handles DOS-style file names with drive letters.
- sed -e 's/^[^:]*: / /' \
- -e 's/^['$alpha']:\/[^:]*: / /' < "$tmpdepfile" >> "$depfile"
-## This next piece of magic avoids the `deleted header file' problem.
-## The problem is that when a header file which appears in a .P file
-## is deleted, the dependency causes make to die (because there is
-## typically no way to rebuild the header). We avoid this by adding
-## dummy dependencies for each header file. Too bad gcc doesn't do
-## this for us directly.
- tr ' ' '
-' < "$tmpdepfile" |
-## Some versions of gcc put a space before the `:'. On the theory
-## that the space means something, we add a space to the output as
-## well.
-## Some versions of the HPUX 10.20 sed can't process this invocation
-## correctly. Breaking it into two sed invocations is a workaround.
- sed -e 's/^\\$//' -e '/^$/d' -e '/:$/d' | sed -e 's/$/ :/' >> "$depfile"
- rm -f "$tmpdepfile"
- ;;
-
-hp)
- # This case exists only to let depend.m4 do its work. It works by
- # looking at the text of this script. This case will never be run,
- # since it is checked for above.
- exit 1
- ;;
-
-sgi)
- if test "$libtool" = yes; then
- "$@" "-Wp,-MDupdate,$tmpdepfile"
- else
- "$@" -MDupdate "$tmpdepfile"
- fi
- stat=$?
- if test $stat -eq 0; then :
- else
- rm -f "$tmpdepfile"
- exit $stat
- fi
- rm -f "$depfile"
-
- if test -f "$tmpdepfile"; then # yes, the sourcefile depend on other files
- echo "$object : \\" > "$depfile"
-
- # Clip off the initial element (the dependent). Don't try to be
- # clever and replace this with sed code, as IRIX sed won't handle
- # lines with more than a fixed number of characters (4096 in
- # IRIX 6.2 sed, 8192 in IRIX 6.5). We also remove comment lines;
- # the IRIX cc adds comments like `#:fec' to the end of the
- # dependency line.
- tr ' ' '
-' < "$tmpdepfile" \
- | sed -e 's/^.*\.o://' -e 's/#.*$//' -e '/^$/ d' | \
- tr '
-' ' ' >> "$depfile"
- echo >> "$depfile"
-
- # The second pass generates a dummy entry for each header file.
- tr ' ' '
-' < "$tmpdepfile" \
- | sed -e 's/^.*\.o://' -e 's/#.*$//' -e '/^$/ d' -e 's/$/:/' \
- >> "$depfile"
- else
- # The sourcefile does not contain any dependencies, so just
- # store a dummy comment line, to avoid errors with the Makefile
- # "include basename.Plo" scheme.
- echo "#dummy" > "$depfile"
- fi
- rm -f "$tmpdepfile"
- ;;
-
-aix)
- # The C for AIX Compiler uses -M and outputs the dependencies
- # in a .u file. In older versions, this file always lives in the
- # current directory. Also, the AIX compiler puts `$object:' at the
- # start of each line; $object doesn't have directory information.
- # Version 6 uses the directory in both cases.
- dir=`echo "$object" | sed -e 's|/[^/]*$|/|'`
- test "x$dir" = "x$object" && dir=
- base=`echo "$object" | sed -e 's|^.*/||' -e 's/\.o$//' -e 's/\.lo$//'`
- if test "$libtool" = yes; then
- tmpdepfile1=$dir$base.u
- tmpdepfile2=$base.u
- tmpdepfile3=$dir.libs/$base.u
- "$@" -Wc,-M
- else
- tmpdepfile1=$dir$base.u
- tmpdepfile2=$dir$base.u
- tmpdepfile3=$dir$base.u
- "$@" -M
- fi
- stat=$?
-
- if test $stat -eq 0; then :
- else
- rm -f "$tmpdepfile1" "$tmpdepfile2" "$tmpdepfile3"
- exit $stat
- fi
-
- for tmpdepfile in "$tmpdepfile1" "$tmpdepfile2" "$tmpdepfile3"
- do
- test -f "$tmpdepfile" && break
- done
- if test -f "$tmpdepfile"; then
- # Each line is of the form `foo.o: dependent.h'.
- # Do two passes, one to just change these to
- # `$object: dependent.h' and one to simply `dependent.h:'.
- sed -e "s,^.*\.[a-z]*:,$object:," < "$tmpdepfile" > "$depfile"
- # That's a tab and a space in the [].
- sed -e 's,^.*\.[a-z]*:[ ]*,,' -e 's,$,:,' < "$tmpdepfile" >> "$depfile"
- else
- # The sourcefile does not contain any dependencies, so just
- # store a dummy comment line, to avoid errors with the Makefile
- # "include basename.Plo" scheme.
- echo "#dummy" > "$depfile"
- fi
- rm -f "$tmpdepfile"
- ;;
-
-icc)
- # Intel's C compiler understands `-MD -MF file'. However on
- # icc -MD -MF foo.d -c -o sub/foo.o sub/foo.c
- # ICC 7.0 will fill foo.d with something like
- # foo.o: sub/foo.c
- # foo.o: sub/foo.h
- # which is wrong. We want:
- # sub/foo.o: sub/foo.c
- # sub/foo.o: sub/foo.h
- # sub/foo.c:
- # sub/foo.h:
- # ICC 7.1 will output
- # foo.o: sub/foo.c sub/foo.h
- # and will wrap long lines using \ :
- # foo.o: sub/foo.c ... \
- # sub/foo.h ... \
- # ...
-
- "$@" -MD -MF "$tmpdepfile"
- stat=$?
- if test $stat -eq 0; then :
- else
- rm -f "$tmpdepfile"
- exit $stat
- fi
- rm -f "$depfile"
- # Each line is of the form `foo.o: dependent.h',
- # or `foo.o: dep1.h dep2.h \', or ` dep3.h dep4.h \'.
- # Do two passes, one to just change these to
- # `$object: dependent.h' and one to simply `dependent.h:'.
- sed "s,^[^:]*:,$object :," < "$tmpdepfile" > "$depfile"
- # Some versions of the HPUX 10.20 sed can't process this invocation
- # correctly. Breaking it into two sed invocations is a workaround.
- sed 's,^[^:]*: \(.*\)$,\1,;s/^\\$//;/^$/d;/:$/d' < "$tmpdepfile" |
- sed -e 's/$/ :/' >> "$depfile"
- rm -f "$tmpdepfile"
- ;;
-
-hp2)
- # The "hp" stanza above does not work with aCC (C++) and HP's ia64
- # compilers, which have integrated preprocessors. The correct option
- # to use with these is +Maked; it writes dependencies to a file named
- # 'foo.d', which lands next to the object file, wherever that
- # happens to be.
- # Much of this is similar to the tru64 case; see comments there.
- dir=`echo "$object" | sed -e 's|/[^/]*$|/|'`
- test "x$dir" = "x$object" && dir=
- base=`echo "$object" | sed -e 's|^.*/||' -e 's/\.o$//' -e 's/\.lo$//'`
- if test "$libtool" = yes; then
- tmpdepfile1=$dir$base.d
- tmpdepfile2=$dir.libs/$base.d
- "$@" -Wc,+Maked
- else
- tmpdepfile1=$dir$base.d
- tmpdepfile2=$dir$base.d
- "$@" +Maked
- fi
- stat=$?
- if test $stat -eq 0; then :
- else
- rm -f "$tmpdepfile1" "$tmpdepfile2"
- exit $stat
- fi
-
- for tmpdepfile in "$tmpdepfile1" "$tmpdepfile2"
- do
- test -f "$tmpdepfile" && break
- done
- if test -f "$tmpdepfile"; then
- sed -e "s,^.*\.[a-z]*:,$object:," "$tmpdepfile" > "$depfile"
- # Add `dependent.h:' lines.
- sed -ne '2,${
- s/^ *//
- s/ \\*$//
- s/$/:/
- p
- }' "$tmpdepfile" >> "$depfile"
- else
- echo "#dummy" > "$depfile"
- fi
- rm -f "$tmpdepfile" "$tmpdepfile2"
- ;;
-
-tru64)
- # The Tru64 compiler uses -MD to generate dependencies as a side
- # effect. `cc -MD -o foo.o ...' puts the dependencies into `foo.o.d'.
- # At least on Alpha/Redhat 6.1, Compaq CCC V6.2-504 seems to put
- # dependencies in `foo.d' instead, so we check for that too.
- # Subdirectories are respected.
- dir=`echo "$object" | sed -e 's|/[^/]*$|/|'`
- test "x$dir" = "x$object" && dir=
- base=`echo "$object" | sed -e 's|^.*/||' -e 's/\.o$//' -e 's/\.lo$//'`
-
- if test "$libtool" = yes; then
- # With Tru64 cc, shared objects can also be used to make a
- # static library. This mechanism is used in libtool 1.4 series to
- # handle both shared and static libraries in a single compilation.
- # With libtool 1.4, dependencies were output in $dir.libs/$base.lo.d.
- #
- # With libtool 1.5 this exception was removed, and libtool now
- # generates 2 separate objects for the 2 libraries. These two
- # compilations output dependencies in $dir.libs/$base.o.d and
- # in $dir$base.o.d. We have to check for both files, because
- # one of the two compilations can be disabled. We should prefer
- # $dir$base.o.d over $dir.libs/$base.o.d because the latter is
- # automatically cleaned when .libs/ is deleted, while ignoring
- # the former would cause a distcleancheck panic.
- tmpdepfile1=$dir.libs/$base.lo.d # libtool 1.4
- tmpdepfile2=$dir$base.o.d # libtool 1.5
- tmpdepfile3=$dir.libs/$base.o.d # libtool 1.5
- tmpdepfile4=$dir.libs/$base.d # Compaq CCC V6.2-504
- "$@" -Wc,-MD
- else
- tmpdepfile1=$dir$base.o.d
- tmpdepfile2=$dir$base.d
- tmpdepfile3=$dir$base.d
- tmpdepfile4=$dir$base.d
- "$@" -MD
- fi
-
- stat=$?
- if test $stat -eq 0; then :
- else
- rm -f "$tmpdepfile1" "$tmpdepfile2" "$tmpdepfile3" "$tmpdepfile4"
- exit $stat
- fi
-
- for tmpdepfile in "$tmpdepfile1" "$tmpdepfile2" "$tmpdepfile3" "$tmpdepfile4"
- do
- test -f "$tmpdepfile" && break
- done
- if test -f "$tmpdepfile"; then
- sed -e "s,^.*\.[a-z]*:,$object:," < "$tmpdepfile" > "$depfile"
- # That's a tab and a space in the [].
- sed -e 's,^.*\.[a-z]*:[ ]*,,' -e 's,$,:,' < "$tmpdepfile" >> "$depfile"
- else
- echo "#dummy" > "$depfile"
- fi
- rm -f "$tmpdepfile"
- ;;
-
-#nosideeffect)
- # This comment above is used by automake to tell side-effect
- # dependency tracking mechanisms from slower ones.
-
-dashmstdout)
- # Important note: in order to support this mode, a compiler *must*
- # always write the preprocessed file to stdout, regardless of -o.
- "$@" || exit $?
-
- # Remove the call to Libtool.
- if test "$libtool" = yes; then
- while test "X$1" != 'X--mode=compile'; do
- shift
- done
- shift
- fi
-
- # Remove `-o $object'.
- IFS=" "
- for arg
- do
- case $arg in
- -o)
- shift
- ;;
- $object)
- shift
- ;;
- *)
- set fnord "$@" "$arg"
- shift # fnord
- shift # $arg
- ;;
- esac
- done
-
- test -z "$dashmflag" && dashmflag=-M
- # Require at least two characters before searching for `:'
- # in the target name. This is to cope with DOS-style filenames:
- # a dependency such as `c:/foo/bar' could be seen as target `c' otherwise.
- "$@" $dashmflag |
- sed 's:^[ ]*[^: ][^:][^:]*\:[ ]*:'"$object"'\: :' > "$tmpdepfile"
- rm -f "$depfile"
- cat < "$tmpdepfile" > "$depfile"
- tr ' ' '
-' < "$tmpdepfile" | \
-## Some versions of the HPUX 10.20 sed can't process this invocation
-## correctly. Breaking it into two sed invocations is a workaround.
- sed -e 's/^\\$//' -e '/^$/d' -e '/:$/d' | sed -e 's/$/ :/' >> "$depfile"
- rm -f "$tmpdepfile"
- ;;
-
-dashXmstdout)
- # This case only exists to satisfy depend.m4. It is never actually
- # run, as this mode is specially recognized in the preamble.
- exit 1
- ;;
-
-makedepend)
- "$@" || exit $?
- # Remove any Libtool call
- if test "$libtool" = yes; then
- while test "X$1" != 'X--mode=compile'; do
- shift
- done
- shift
- fi
- # X makedepend
- shift
- cleared=no eat=no
- for arg
- do
- case $cleared in
- no)
- set ""; shift
- cleared=yes ;;
- esac
- if test $eat = yes; then
- eat=no
- continue
- fi
- case "$arg" in
- -D*|-I*)
- set fnord "$@" "$arg"; shift ;;
- # Strip any option that makedepend may not understand. Remove
- # the object too, otherwise makedepend will parse it as a source file.
- -arch)
- eat=yes ;;
- -*|$object)
- ;;
- *)
- set fnord "$@" "$arg"; shift ;;
- esac
- done
- obj_suffix=`echo "$object" | sed 's/^.*\././'`
- touch "$tmpdepfile"
- ${MAKEDEPEND-makedepend} -o"$obj_suffix" -f"$tmpdepfile" "$@"
- rm -f "$depfile"
- cat < "$tmpdepfile" > "$depfile"
- sed '1,2d' "$tmpdepfile" | tr ' ' '
-' | \
-## Some versions of the HPUX 10.20 sed can't process this invocation
-## correctly. Breaking it into two sed invocations is a workaround.
- sed -e 's/^\\$//' -e '/^$/d' -e '/:$/d' | sed -e 's/$/ :/' >> "$depfile"
- rm -f "$tmpdepfile" "$tmpdepfile".bak
- ;;
-
-cpp)
- # Important note: in order to support this mode, a compiler *must*
- # always write the preprocessed file to stdout.
- "$@" || exit $?
-
- # Remove the call to Libtool.
- if test "$libtool" = yes; then
- while test "X$1" != 'X--mode=compile'; do
- shift
- done
- shift
- fi
-
- # Remove `-o $object'.
- IFS=" "
- for arg
- do
- case $arg in
- -o)
- shift
- ;;
- $object)
- shift
- ;;
- *)
- set fnord "$@" "$arg"
- shift # fnord
- shift # $arg
- ;;
- esac
- done
-
- "$@" -E |
- sed -n -e '/^# [0-9][0-9]* "\([^"]*\)".*/ s:: \1 \\:p' \
- -e '/^#line [0-9][0-9]* "\([^"]*\)".*/ s:: \1 \\:p' |
- sed '$ s: \\$::' > "$tmpdepfile"
- rm -f "$depfile"
- echo "$object : \\" > "$depfile"
- cat < "$tmpdepfile" >> "$depfile"
- sed < "$tmpdepfile" '/^$/d;s/^ //;s/ \\$//;s/$/ :/' >> "$depfile"
- rm -f "$tmpdepfile"
- ;;
-
-msvisualcpp)
- # Important note: in order to support this mode, a compiler *must*
- # always write the preprocessed file to stdout.
- "$@" || exit $?
-
- # Remove the call to Libtool.
- if test "$libtool" = yes; then
- while test "X$1" != 'X--mode=compile'; do
- shift
- done
- shift
- fi
-
- IFS=" "
- for arg
- do
- case "$arg" in
- -o)
- shift
- ;;
- $object)
- shift
- ;;
- "-Gm"|"/Gm"|"-Gi"|"/Gi"|"-ZI"|"/ZI")
- set fnord "$@"
- shift
- shift
- ;;
- *)
- set fnord "$@" "$arg"
- shift
- shift
- ;;
- esac
- done
- "$@" -E 2>/dev/null |
- sed -n '/^#line [0-9][0-9]* "\([^"]*\)"/ s::\1:p' | $cygpath_u | sort -u > "$tmpdepfile"
- rm -f "$depfile"
- echo "$object : \\" > "$depfile"
- sed < "$tmpdepfile" -n -e 's% %\\ %g' -e '/^\(.*\)$/ s:: \1 \\:p' >> "$depfile"
- echo " " >> "$depfile"
- sed < "$tmpdepfile" -n -e 's% %\\ %g' -e '/^\(.*\)$/ s::\1\::p' >> "$depfile"
- rm -f "$tmpdepfile"
- ;;
-
-msvcmsys)
- # This case exists only to let depend.m4 do its work. It works by
- # looking at the text of this script. This case will never be run,
- # since it is checked for above.
- exit 1
- ;;
-
-none)
- exec "$@"
- ;;
-
-*)
- echo "Unknown depmode $depmode" 1>&2
- exit 1
- ;;
-esac
-
-exit 0
-
-# Local Variables:
-# mode: shell-script
-# sh-indentation: 2
-# eval: (add-hook 'write-file-hooks 'time-stamp)
-# time-stamp-start: "scriptversion="
-# time-stamp-format: "%:y-%02m-%02d.%02H"
-# time-stamp-time-zone: "UTC"
-# time-stamp-end: "; # UTC"
-# End:
diff --git a/Build/source/texk/web2c/luatexdir/zziplib/uses/install-sh b/Build/source/texk/web2c/luatexdir/zziplib/uses/install-sh
deleted file mode 100755
index 6781b987bdb..00000000000
--- a/Build/source/texk/web2c/luatexdir/zziplib/uses/install-sh
+++ /dev/null
@@ -1,520 +0,0 @@
-#!/bin/sh
-# install - install a program, script, or datafile
-
-scriptversion=2009-04-28.21; # UTC
-
-# This originates from X11R5 (mit/util/scripts/install.sh), which was
-# later released in X11R6 (xc/config/util/install.sh) with the
-# following copyright and license.
-#
-# Copyright (C) 1994 X Consortium
-#
-# Permission is hereby granted, free of charge, to any person obtaining a copy
-# of this software and associated documentation files (the "Software"), to
-# deal in the Software without restriction, including without limitation the
-# rights to use, copy, modify, merge, publish, distribute, sublicense, and/or
-# sell copies of the Software, and to permit persons to whom the Software is
-# furnished to do so, subject to the following conditions:
-#
-# The above copyright notice and this permission notice shall be included in
-# all copies or substantial portions of the Software.
-#
-# THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND, EXPRESS OR
-# IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES OF MERCHANTABILITY,
-# FITNESS FOR A PARTICULAR PURPOSE AND NONINFRINGEMENT. IN NO EVENT SHALL THE
-# X CONSORTIUM BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY, WHETHER IN
-# AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING FROM, OUT OF OR IN CONNEC-
-# TION WITH THE SOFTWARE OR THE USE OR OTHER DEALINGS IN THE SOFTWARE.
-#
-# Except as contained in this notice, the name of the X Consortium shall not
-# be used in advertising or otherwise to promote the sale, use or other deal-
-# ings in this Software without prior written authorization from the X Consor-
-# tium.
-#
-#
-# FSF changes to this file are in the public domain.
-#
-# Calling this script install-sh is preferred over install.sh, to prevent
-# `make' implicit rules from creating a file called install from it
-# when there is no Makefile.
-#
-# This script is compatible with the BSD install script, but was written
-# from scratch.
-
-nl='
-'
-IFS=" "" $nl"
-
-# set DOITPROG to echo to test this script
-
-# Don't use :- since 4.3BSD and earlier shells don't like it.
-doit=${DOITPROG-}
-if test -z "$doit"; then
- doit_exec=exec
-else
- doit_exec=$doit
-fi
-
-# Put in absolute file names if you don't have them in your path;
-# or use environment vars.
-
-chgrpprog=${CHGRPPROG-chgrp}
-chmodprog=${CHMODPROG-chmod}
-chownprog=${CHOWNPROG-chown}
-cmpprog=${CMPPROG-cmp}
-cpprog=${CPPROG-cp}
-mkdirprog=${MKDIRPROG-mkdir}
-mvprog=${MVPROG-mv}
-rmprog=${RMPROG-rm}
-stripprog=${STRIPPROG-strip}
-
-posix_glob='?'
-initialize_posix_glob='
- test "$posix_glob" != "?" || {
- if (set -f) 2>/dev/null; then
- posix_glob=
- else
- posix_glob=:
- fi
- }
-'
-
-posix_mkdir=
-
-# Desired mode of installed file.
-mode=0755
-
-chgrpcmd=
-chmodcmd=$chmodprog
-chowncmd=
-mvcmd=$mvprog
-rmcmd="$rmprog -f"
-stripcmd=
-
-src=
-dst=
-dir_arg=
-dst_arg=
-
-copy_on_change=false
-no_target_directory=
-
-usage="\
-Usage: $0 [OPTION]... [-T] SRCFILE DSTFILE
- or: $0 [OPTION]... SRCFILES... DIRECTORY
- or: $0 [OPTION]... -t DIRECTORY SRCFILES...
- or: $0 [OPTION]... -d DIRECTORIES...
-
-In the 1st form, copy SRCFILE to DSTFILE.
-In the 2nd and 3rd, copy all SRCFILES to DIRECTORY.
-In the 4th, create DIRECTORIES.
-
-Options:
- --help display this help and exit.
- --version display version info and exit.
-
- -c (ignored)
- -C install only if different (preserve the last data modification time)
- -d create directories instead of installing files.
- -g GROUP $chgrpprog installed files to GROUP.
- -m MODE $chmodprog installed files to MODE.
- -o USER $chownprog installed files to USER.
- -s $stripprog installed files.
- -t DIRECTORY install into DIRECTORY.
- -T report an error if DSTFILE is a directory.
-
-Environment variables override the default commands:
- CHGRPPROG CHMODPROG CHOWNPROG CMPPROG CPPROG MKDIRPROG MVPROG
- RMPROG STRIPPROG
-"
-
-while test $# -ne 0; do
- case $1 in
- -c) ;;
-
- -C) copy_on_change=true;;
-
- -d) dir_arg=true;;
-
- -g) chgrpcmd="$chgrpprog $2"
- shift;;
-
- --help) echo "$usage"; exit $?;;
-
- -m) mode=$2
- case $mode in
- *' '* | *' '* | *'
-'* | *'*'* | *'?'* | *'['*)
- echo "$0: invalid mode: $mode" >&2
- exit 1;;
- esac
- shift;;
-
- -o) chowncmd="$chownprog $2"
- shift;;
-
- -s) stripcmd=$stripprog;;
-
- -t) dst_arg=$2
- shift;;
-
- -T) no_target_directory=true;;
-
- --version) echo "$0 $scriptversion"; exit $?;;
-
- --) shift
- break;;
-
- -*) echo "$0: invalid option: $1" >&2
- exit 1;;
-
- *) break;;
- esac
- shift
-done
-
-if test $# -ne 0 && test -z "$dir_arg$dst_arg"; then
- # When -d is used, all remaining arguments are directories to create.
- # When -t is used, the destination is already specified.
- # Otherwise, the last argument is the destination. Remove it from $@.
- for arg
- do
- if test -n "$dst_arg"; then
- # $@ is not empty: it contains at least $arg.
- set fnord "$@" "$dst_arg"
- shift # fnord
- fi
- shift # arg
- dst_arg=$arg
- done
-fi
-
-if test $# -eq 0; then
- if test -z "$dir_arg"; then
- echo "$0: no input file specified." >&2
- exit 1
- fi
- # It's OK to call `install-sh -d' without argument.
- # This can happen when creating conditional directories.
- exit 0
-fi
-
-if test -z "$dir_arg"; then
- trap '(exit $?); exit' 1 2 13 15
-
- # Set umask so as not to create temps with too-generous modes.
- # However, 'strip' requires both read and write access to temps.
- case $mode in
- # Optimize common cases.
- *644) cp_umask=133;;
- *755) cp_umask=22;;
-
- *[0-7])
- if test -z "$stripcmd"; then
- u_plus_rw=
- else
- u_plus_rw='% 200'
- fi
- cp_umask=`expr '(' 777 - $mode % 1000 ')' $u_plus_rw`;;
- *)
- if test -z "$stripcmd"; then
- u_plus_rw=
- else
- u_plus_rw=,u+rw
- fi
- cp_umask=$mode$u_plus_rw;;
- esac
-fi
-
-for src
-do
- # Protect names starting with `-'.
- case $src in
- -*) src=./$src;;
- esac
-
- if test -n "$dir_arg"; then
- dst=$src
- dstdir=$dst
- test -d "$dstdir"
- dstdir_status=$?
- else
-
- # Waiting for this to be detected by the "$cpprog $src $dsttmp" command
- # might cause directories to be created, which would be especially bad
- # if $src (and thus $dsttmp) contains '*'.
- if test ! -f "$src" && test ! -d "$src"; then
- echo "$0: $src does not exist." >&2
- exit 1
- fi
-
- if test -z "$dst_arg"; then
- echo "$0: no destination specified." >&2
- exit 1
- fi
-
- dst=$dst_arg
- # Protect names starting with `-'.
- case $dst in
- -*) dst=./$dst;;
- esac
-
- # If destination is a directory, append the input filename; won't work
- # if double slashes aren't ignored.
- if test -d "$dst"; then
- if test -n "$no_target_directory"; then
- echo "$0: $dst_arg: Is a directory" >&2
- exit 1
- fi
- dstdir=$dst
- dst=$dstdir/`basename "$src"`
- dstdir_status=0
- else
- # Prefer dirname, but fall back on a substitute if dirname fails.
- dstdir=`
- (dirname "$dst") 2>/dev/null ||
- expr X"$dst" : 'X\(.*[^/]\)//*[^/][^/]*/*$' \| \
- X"$dst" : 'X\(//\)[^/]' \| \
- X"$dst" : 'X\(//\)$' \| \
- X"$dst" : 'X\(/\)' \| . 2>/dev/null ||
- echo X"$dst" |
- sed '/^X\(.*[^/]\)\/\/*[^/][^/]*\/*$/{
- s//\1/
- q
- }
- /^X\(\/\/\)[^/].*/{
- s//\1/
- q
- }
- /^X\(\/\/\)$/{
- s//\1/
- q
- }
- /^X\(\/\).*/{
- s//\1/
- q
- }
- s/.*/./; q'
- `
-
- test -d "$dstdir"
- dstdir_status=$?
- fi
- fi
-
- obsolete_mkdir_used=false
-
- if test $dstdir_status != 0; then
- case $posix_mkdir in
- '')
- # Create intermediate dirs using mode 755 as modified by the umask.
- # This is like FreeBSD 'install' as of 1997-10-28.
- umask=`umask`
- case $stripcmd.$umask in
- # Optimize common cases.
- *[2367][2367]) mkdir_umask=$umask;;
- .*0[02][02] | .[02][02] | .[02]) mkdir_umask=22;;
-
- *[0-7])
- mkdir_umask=`expr $umask + 22 \
- - $umask % 100 % 40 + $umask % 20 \
- - $umask % 10 % 4 + $umask % 2
- `;;
- *) mkdir_umask=$umask,go-w;;
- esac
-
- # With -d, create the new directory with the user-specified mode.
- # Otherwise, rely on $mkdir_umask.
- if test -n "$dir_arg"; then
- mkdir_mode=-m$mode
- else
- mkdir_mode=
- fi
-
- posix_mkdir=false
- case $umask in
- *[123567][0-7][0-7])
- # POSIX mkdir -p sets u+wx bits regardless of umask, which
- # is incompatible with FreeBSD 'install' when (umask & 300) != 0.
- ;;
- *)
- tmpdir=${TMPDIR-/tmp}/ins$RANDOM-$$
- trap 'ret=$?; rmdir "$tmpdir/d" "$tmpdir" 2>/dev/null; exit $ret' 0
-
- if (umask $mkdir_umask &&
- exec $mkdirprog $mkdir_mode -p -- "$tmpdir/d") >/dev/null 2>&1
- then
- if test -z "$dir_arg" || {
- # Check for POSIX incompatibilities with -m.
- # HP-UX 11.23 and IRIX 6.5 mkdir -m -p sets group- or
- # other-writeable bit of parent directory when it shouldn't.
- # FreeBSD 6.1 mkdir -m -p sets mode of existing directory.
- ls_ld_tmpdir=`ls -ld "$tmpdir"`
- case $ls_ld_tmpdir in
- d????-?r-*) different_mode=700;;
- d????-?--*) different_mode=755;;
- *) false;;
- esac &&
- $mkdirprog -m$different_mode -p -- "$tmpdir" && {
- ls_ld_tmpdir_1=`ls -ld "$tmpdir"`
- test "$ls_ld_tmpdir" = "$ls_ld_tmpdir_1"
- }
- }
- then posix_mkdir=:
- fi
- rmdir "$tmpdir/d" "$tmpdir"
- else
- # Remove any dirs left behind by ancient mkdir implementations.
- rmdir ./$mkdir_mode ./-p ./-- 2>/dev/null
- fi
- trap '' 0;;
- esac;;
- esac
-
- if
- $posix_mkdir && (
- umask $mkdir_umask &&
- $doit_exec $mkdirprog $mkdir_mode -p -- "$dstdir"
- )
- then :
- else
-
- # The umask is ridiculous, or mkdir does not conform to POSIX,
- # or it failed possibly due to a race condition. Create the
- # directory the slow way, step by step, checking for races as we go.
-
- case $dstdir in
- /*) prefix='/';;
- -*) prefix='./';;
- *) prefix='';;
- esac
-
- eval "$initialize_posix_glob"
-
- oIFS=$IFS
- IFS=/
- $posix_glob set -f
- set fnord $dstdir
- shift
- $posix_glob set +f
- IFS=$oIFS
-
- prefixes=
-
- for d
- do
- test -z "$d" && continue
-
- prefix=$prefix$d
- if test -d "$prefix"; then
- prefixes=
- else
- if $posix_mkdir; then
- (umask=$mkdir_umask &&
- $doit_exec $mkdirprog $mkdir_mode -p -- "$dstdir") && break
- # Don't fail if two instances are running concurrently.
- test -d "$prefix" || exit 1
- else
- case $prefix in
- *\'*) qprefix=`echo "$prefix" | sed "s/'/'\\\\\\\\''/g"`;;
- *) qprefix=$prefix;;
- esac
- prefixes="$prefixes '$qprefix'"
- fi
- fi
- prefix=$prefix/
- done
-
- if test -n "$prefixes"; then
- # Don't fail if two instances are running concurrently.
- (umask $mkdir_umask &&
- eval "\$doit_exec \$mkdirprog $prefixes") ||
- test -d "$dstdir" || exit 1
- obsolete_mkdir_used=true
- fi
- fi
- fi
-
- if test -n "$dir_arg"; then
- { test -z "$chowncmd" || $doit $chowncmd "$dst"; } &&
- { test -z "$chgrpcmd" || $doit $chgrpcmd "$dst"; } &&
- { test "$obsolete_mkdir_used$chowncmd$chgrpcmd" = false ||
- test -z "$chmodcmd" || $doit $chmodcmd $mode "$dst"; } || exit 1
- else
-
- # Make a couple of temp file names in the proper directory.
- dsttmp=$dstdir/_inst.$$_
- rmtmp=$dstdir/_rm.$$_
-
- # Trap to clean up those temp files at exit.
- trap 'ret=$?; rm -f "$dsttmp" "$rmtmp" && exit $ret' 0
-
- # Copy the file name to the temp name.
- (umask $cp_umask && $doit_exec $cpprog "$src" "$dsttmp") &&
-
- # and set any options; do chmod last to preserve setuid bits.
- #
- # If any of these fail, we abort the whole thing. If we want to
- # ignore errors from any of these, just make sure not to ignore
- # errors from the above "$doit $cpprog $src $dsttmp" command.
- #
- { test -z "$chowncmd" || $doit $chowncmd "$dsttmp"; } &&
- { test -z "$chgrpcmd" || $doit $chgrpcmd "$dsttmp"; } &&
- { test -z "$stripcmd" || $doit $stripcmd "$dsttmp"; } &&
- { test -z "$chmodcmd" || $doit $chmodcmd $mode "$dsttmp"; } &&
-
- # If -C, don't bother to copy if it wouldn't change the file.
- if $copy_on_change &&
- old=`LC_ALL=C ls -dlL "$dst" 2>/dev/null` &&
- new=`LC_ALL=C ls -dlL "$dsttmp" 2>/dev/null` &&
-
- eval "$initialize_posix_glob" &&
- $posix_glob set -f &&
- set X $old && old=:$2:$4:$5:$6 &&
- set X $new && new=:$2:$4:$5:$6 &&
- $posix_glob set +f &&
-
- test "$old" = "$new" &&
- $cmpprog "$dst" "$dsttmp" >/dev/null 2>&1
- then
- rm -f "$dsttmp"
- else
- # Rename the file to the real destination.
- $doit $mvcmd -f "$dsttmp" "$dst" 2>/dev/null ||
-
- # The rename failed, perhaps because mv can't rename something else
- # to itself, or perhaps because mv is so ancient that it does not
- # support -f.
- {
- # Now remove or move aside any old file at destination location.
- # We try this two ways since rm can't unlink itself on some
- # systems and the destination file might be busy for other
- # reasons. In this case, the final cleanup might fail but the new
- # file should still install successfully.
- {
- test ! -f "$dst" ||
- $doit $rmcmd -f "$dst" 2>/dev/null ||
- { $doit $mvcmd -f "$dst" "$rmtmp" 2>/dev/null &&
- { $doit $rmcmd -f "$rmtmp" 2>/dev/null; :; }
- } ||
- { echo "$0: cannot unlink or rename $dst" >&2
- (exit 1); exit 1
- }
- } &&
-
- # Now rename the file to the real destination.
- $doit $mvcmd "$dsttmp" "$dst"
- }
- fi || exit 1
-
- trap '' 0
- fi
-done
-
-# Local variables:
-# eval: (add-hook 'write-file-hooks 'time-stamp)
-# time-stamp-start: "scriptversion="
-# time-stamp-format: "%:y-%02m-%02d.%02H"
-# time-stamp-time-zone: "UTC"
-# time-stamp-end: "; # UTC"
-# End:
diff --git a/Build/source/texk/web2c/luatexdir/zziplib/uses/ltmain.sh b/Build/source/texk/web2c/luatexdir/zziplib/uses/ltmain.sh
deleted file mode 100644
index eecedf23e43..00000000000
--- a/Build/source/texk/web2c/luatexdir/zziplib/uses/ltmain.sh
+++ /dev/null
@@ -1,6500 +0,0 @@
-# ltmain.sh - Provide generalized library-building support services.
-# NOTE: Changing this file will not affect anything until you rerun configure.
-#
-# Copyright (C) 1996, 1997, 1998, 1999, 2000, 2001, 2003, 2004, 2005
-# Free Software Foundation, Inc.
-# Originally by Gordon Matzigkeit <gord@gnu.ai.mit.edu>, 1996
-#
-# This program is free software; you can redistribute it and/or modify
-# it under the terms of the GNU General Public License as published by
-# the Free Software Foundation; either version 2 of the License, or
-# (at your option) any later version.
-#
-# This program is distributed in the hope that it will be useful, but
-# WITHOUT ANY WARRANTY; without even the implied warranty of
-# MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the GNU
-# General Public License for more details.
-#
-# You should have received a copy of the GNU General Public License
-# along with this program; if not, write to the Free Software
-# Foundation, Inc., 51 Franklin Street, Fifth Floor, Boston, MA 02110-1301, USA.
-#
-# As a special exception to the GNU General Public License, if you
-# distribute this file as part of a program that contains a
-# configuration script generated by Autoconf, you may include it under
-# the same distribution terms that you use for the rest of that program.
-
-basename="s,^.*/,,g"
-
-# Work around backward compatibility issue on IRIX 6.5. On IRIX 6.4+, sh
-# is ksh but when the shell is invoked as "sh" and the current value of
-# the _XPG environment variable is not equal to 1 (one), the special
-# positional parameter $0, within a function call, is the name of the
-# function.
-progpath="$0"
-
-# The name of this program:
-progname=`echo "$progpath" | $SED $basename`
-modename="$progname"
-
-# Global variables:
-EXIT_SUCCESS=0
-EXIT_FAILURE=1
-
-PROGRAM=ltmain.sh
-PACKAGE=libtool
-VERSION=1.5.18
-TIMESTAMP=" (1.1220.2.245 2005/05/16 08:55:27)"
-
-# See if we are running on zsh, and set the options which allow our
-# commands through without removal of \ escapes.
-if test -n "${ZSH_VERSION+set}" ; then
- setopt NO_GLOB_SUBST
-fi
-
-# Check that we have a working $echo.
-if test "X$1" = X--no-reexec; then
- # Discard the --no-reexec flag, and continue.
- shift
-elif test "X$1" = X--fallback-echo; then
- # Avoid inline document here, it may be left over
- :
-elif test "X`($echo '\t') 2>/dev/null`" = 'X\t'; then
- # Yippee, $echo works!
- :
-else
- # Restart under the correct shell, and then maybe $echo will work.
- exec $SHELL "$progpath" --no-reexec ${1+"$@"}
-fi
-
-if test "X$1" = X--fallback-echo; then
- # used as fallback echo
- shift
- cat <<EOF
-$*
-EOF
- exit $EXIT_SUCCESS
-fi
-
-default_mode=
-help="Try \`$progname --help' for more information."
-magic="%%%MAGIC variable%%%"
-mkdir="mkdir"
-mv="mv -f"
-rm="rm -f"
-
-# Sed substitution that helps us do robust quoting. It backslashifies
-# metacharacters that are still active within double-quoted strings.
-Xsed="${SED}"' -e 1s/^X//'
-sed_quote_subst='s/\([\\`\\"$\\\\]\)/\\\1/g'
-# test EBCDIC or ASCII
-case `echo A|tr A '\301'` in
- A) # EBCDIC based system
- SP2NL="tr '\100' '\n'"
- NL2SP="tr '\r\n' '\100\100'"
- ;;
- *) # Assume ASCII based system
- SP2NL="tr '\040' '\012'"
- NL2SP="tr '\015\012' '\040\040'"
- ;;
-esac
-
-# NLS nuisances.
-# Only set LANG and LC_ALL to C if already set.
-# These must not be set unconditionally because not all systems understand
-# e.g. LANG=C (notably SCO).
-# We save the old values to restore during execute mode.
-if test "${LC_ALL+set}" = set; then
- save_LC_ALL="$LC_ALL"; LC_ALL=C; export LC_ALL
-fi
-if test "${LANG+set}" = set; then
- save_LANG="$LANG"; LANG=C; export LANG
-fi
-
-# Make sure IFS has a sensible default
-lt_nl='
-'
-IFS=" $lt_nl"
-
-if test "$build_libtool_libs" != yes && test "$build_old_libs" != yes; then
- $echo "$modename: not configured to build any kind of library" 1>&2
- $echo "Fatal configuration error. See the $PACKAGE docs for more information." 1>&2
- exit $EXIT_FAILURE
-fi
-
-# Global variables.
-mode=$default_mode
-nonopt=
-prev=
-prevopt=
-run=
-show="$echo"
-show_help=
-execute_dlfiles=
-lo2o="s/\\.lo\$/.${objext}/"
-o2lo="s/\\.${objext}\$/.lo/"
-quote_scanset='[[~#^*{};<>?'"'"' ]'
-
-#####################################
-# Shell function definitions:
-# This seems to be the best place for them
-
-# func_win32_libid arg
-# return the library type of file 'arg'
-#
-# Need a lot of goo to handle *both* DLLs and import libs
-# Has to be a shell function in order to 'eat' the argument
-# that is supplied when $file_magic_command is called.
-func_win32_libid ()
-{
- win32_libid_type="unknown"
- win32_fileres=`file -L $1 2>/dev/null`
- case $win32_fileres in
- *ar\ archive\ import\ library*) # definitely import
- win32_libid_type="x86 archive import"
- ;;
- *ar\ archive*) # could be an import, or static
- if eval $OBJDUMP -f $1 | $SED -e '10q' 2>/dev/null | \
- $EGREP -e 'file format pe-i386(.*architecture: i386)?' >/dev/null ; then
- win32_nmres=`eval $NM -f posix -A $1 | \
- sed -n -e '1,100{/ I /{x;/import/!{s/^/import/;h;p;};x;};}'`
- if test "X$win32_nmres" = "Ximport" ; then
- win32_libid_type="x86 archive import"
- else
- win32_libid_type="x86 archive static"
- fi
- fi
- ;;
- *DLL*)
- win32_libid_type="x86 DLL"
- ;;
- *executable*) # but shell scripts are "executable" too...
- case $win32_fileres in
- *MS\ Windows\ PE\ Intel*)
- win32_libid_type="x86 DLL"
- ;;
- esac
- ;;
- esac
- $echo $win32_libid_type
-}
-
-
-# func_infer_tag arg
-# Infer tagged configuration to use if any are available and
-# if one wasn't chosen via the "--tag" command line option.
-# Only attempt this if the compiler in the base compile
-# command doesn't match the default compiler.
-# arg is usually of the form 'gcc ...'
-func_infer_tag ()
-{
- if test -n "$available_tags" && test -z "$tagname"; then
- CC_quoted=
- for arg in $CC; do
- case $arg in
- *$quote_scanset* | *]* | *\|* | *\&* | *\(* | *\)* | "")
- arg="\"$arg\""
- ;;
- esac
- CC_quoted="$CC_quoted $arg"
- done
- case $@ in
- # Blanks in the command may have been stripped by the calling shell,
- # but not from the CC environment variable when configure was run.
- " $CC "* | "$CC "* | " `$echo $CC` "* | "`$echo $CC` "* | " $CC_quoted"* | "$CC_quoted "* | " `$echo $CC_quoted` "* | "`$echo $CC_quoted` "*) ;;
- # Blanks at the start of $base_compile will cause this to fail
- # if we don't check for them as well.
- *)
- for z in $available_tags; do
- if grep "^# ### BEGIN LIBTOOL TAG CONFIG: $z$" < "$progpath" > /dev/null; then
- # Evaluate the configuration.
- eval "`${SED} -n -e '/^# ### BEGIN LIBTOOL TAG CONFIG: '$z'$/,/^# ### END LIBTOOL TAG CONFIG: '$z'$/p' < $progpath`"
- CC_quoted=
- for arg in $CC; do
- # Double-quote args containing other shell metacharacters.
- case $arg in
- *$quote_scanset* | *]* | *\|* | *\&* | *\(* | *\)* | "")
- arg="\"$arg\""
- ;;
- esac
- CC_quoted="$CC_quoted $arg"
- done
- case "$@ " in
- " $CC "* | "$CC "* | " `$echo $CC` "* | "`$echo $CC` "* | " $CC_quoted"* | "$CC_quoted "* | " `$echo $CC_quoted` "* | "`$echo $CC_quoted` "*)
- # The compiler in the base compile command matches
- # the one in the tagged configuration.
- # Assume this is the tagged configuration we want.
- tagname=$z
- break
- ;;
- esac
- fi
- done
- # If $tagname still isn't set, then no tagged configuration
- # was found and let the user know that the "--tag" command
- # line option must be used.
- if test -z "$tagname"; then
- $echo "$modename: unable to infer tagged configuration"
- $echo "$modename: specify a tag with \`--tag'" 1>&2
- exit $EXIT_FAILURE
-# else
-# $echo "$modename: using $tagname tagged configuration"
- fi
- ;;
- esac
- fi
-}
-
-
-# func_extract_an_archive dir oldlib
-func_extract_an_archive ()
-{
- f_ex_an_ar_dir="$1"; shift
- f_ex_an_ar_oldlib="$1"
-
- $show "(cd $f_ex_an_ar_dir && $AR x $f_ex_an_ar_oldlib)"
- $run eval "(cd \$f_ex_an_ar_dir && $AR x \$f_ex_an_ar_oldlib)" || exit $?
- if ($AR t "$f_ex_an_ar_oldlib" | sort | sort -uc >/dev/null 2>&1); then
- :
- else
- $echo "$modename: ERROR: object name conflicts: $f_ex_an_ar_dir/$f_ex_an_ar_oldlib" 1>&2
- exit $EXIT_FAILURE
- fi
-}
-
-# func_extract_archives gentop oldlib ...
-func_extract_archives ()
-{
- my_gentop="$1"; shift
- my_oldlibs=${1+"$@"}
- my_oldobjs=""
- my_xlib=""
- my_xabs=""
- my_xdir=""
- my_status=""
-
- $show "${rm}r $my_gentop"
- $run ${rm}r "$my_gentop"
- $show "$mkdir $my_gentop"
- $run $mkdir "$my_gentop"
- my_status=$?
- if test "$my_status" -ne 0 && test ! -d "$my_gentop"; then
- exit $my_status
- fi
-
- for my_xlib in $my_oldlibs; do
- # Extract the objects.
- case $my_xlib in
- [\\/]* | [A-Za-z]:[\\/]*) my_xabs="$my_xlib" ;;
- *) my_xabs=`pwd`"/$my_xlib" ;;
- esac
- my_xlib=`$echo "X$my_xlib" | $Xsed -e 's%^.*/%%'`
- my_xdir="$my_gentop/$my_xlib"
-
- $show "${rm}r $my_xdir"
- $run ${rm}r "$my_xdir"
- $show "$mkdir $my_xdir"
- $run $mkdir "$my_xdir"
- status=$?
- if test "$status" -ne 0 && test ! -d "$my_xdir"; then
- exit $status
- fi
- case $host in
- *-darwin*)
- $show "Extracting $my_xabs"
- # Do not bother doing anything if just a dry run
- if test -z "$run"; then
- darwin_orig_dir=`pwd`
- cd $my_xdir || exit $?
- darwin_archive=$my_xabs
- darwin_curdir=`pwd`
- darwin_base_archive=`$echo "X$darwin_archive" | $Xsed -e 's%^.*/%%'`
- darwin_arches=`lipo -info "$darwin_archive" 2>/dev/null | $EGREP Architectures 2>/dev/null`
- if test -n "$darwin_arches"; then
- darwin_arches=`echo "$darwin_arches" | $SED -e 's/.*are://'`
- darwin_arch=
- $show "$darwin_base_archive has multiple architectures $darwin_arches"
- for darwin_arch in $darwin_arches ; do
- mkdir -p "unfat-$$/${darwin_base_archive}-${darwin_arch}"
- lipo -thin $darwin_arch -output "unfat-$$/${darwin_base_archive}-${darwin_arch}/${darwin_base_archive}" "${darwin_archive}"
- cd "unfat-$$/${darwin_base_archive}-${darwin_arch}"
- func_extract_an_archive "`pwd`" "${darwin_base_archive}"
- cd "$darwin_curdir"
- $rm "unfat-$$/${darwin_base_archive}-${darwin_arch}/${darwin_base_archive}"
- done # $darwin_arches
- ## Okay now we have a bunch of thin objects, gotta fatten them up :)
- darwin_filelist=`find unfat-$$ -type f -name \*.o -print -o -name \*.lo -print| xargs basename | sort -u | $NL2SP`
- darwin_file=
- darwin_files=
- for darwin_file in $darwin_filelist; do
- darwin_files=`find unfat-$$ -name $darwin_file -print | $NL2SP`
- lipo -create -output "$darwin_file" $darwin_files
- done # $darwin_filelist
- ${rm}r unfat-$$
- cd "$darwin_orig_dir"
- else
- cd "$darwin_orig_dir"
- func_extract_an_archive "$my_xdir" "$my_xabs"
- fi # $darwin_arches
- fi # $run
- ;;
- *)
- func_extract_an_archive "$my_xdir" "$my_xabs"
- ;;
- esac
- my_oldobjs="$my_oldobjs "`find $my_xdir -name \*.$objext -print -o -name \*.lo -print | $NL2SP`
- done
- func_extract_archives_result="$my_oldobjs"
-}
-# End of Shell function definitions
-#####################################
-
-# Darwin sucks
-eval std_shrext=\"$shrext_cmds\"
-
-# Parse our command line options once, thoroughly.
-while test "$#" -gt 0
-do
- arg="$1"
- shift
-
- case $arg in
- -*=*) optarg=`$echo "X$arg" | $Xsed -e 's/[-_a-zA-Z0-9]*=//'` ;;
- *) optarg= ;;
- esac
-
- # If the previous option needs an argument, assign it.
- if test -n "$prev"; then
- case $prev in
- execute_dlfiles)
- execute_dlfiles="$execute_dlfiles $arg"
- ;;
- tag)
- tagname="$arg"
- preserve_args="${preserve_args}=$arg"
-
- # Check whether tagname contains only valid characters
- case $tagname in
- *[!-_A-Za-z0-9,/]*)
- $echo "$progname: invalid tag name: $tagname" 1>&2
- exit $EXIT_FAILURE
- ;;
- esac
-
- case $tagname in
- CC)
- # Don't test for the "default" C tag, as we know, it's there, but
- # not specially marked.
- ;;
- *)
- if grep "^# ### BEGIN LIBTOOL TAG CONFIG: $tagname$" < "$progpath" > /dev/null; then
- taglist="$taglist $tagname"
- # Evaluate the configuration.
- eval "`${SED} -n -e '/^# ### BEGIN LIBTOOL TAG CONFIG: '$tagname'$/,/^# ### END LIBTOOL TAG CONFIG: '$tagname'$/p' < $progpath`"
- else
- $echo "$progname: ignoring unknown tag $tagname" 1>&2
- fi
- ;;
- esac
- ;;
- *)
- eval "$prev=\$arg"
- ;;
- esac
-
- prev=
- prevopt=
- continue
- fi
-
- # Have we seen a non-optional argument yet?
- case $arg in
- --help)
- show_help=yes
- ;;
-
- --version)
- $echo "$PROGRAM (GNU $PACKAGE) $VERSION$TIMESTAMP"
- $echo
- $echo "Copyright (C) 2005 Free Software Foundation, Inc."
- $echo "This is free software; see the source for copying conditions. There is NO"
- $echo "warranty; not even for MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE."
- exit $?
- ;;
-
- --config)
- ${SED} -e '1,/^# ### BEGIN LIBTOOL CONFIG/d' -e '/^# ### END LIBTOOL CONFIG/,$d' $progpath
- # Now print the configurations for the tags.
- for tagname in $taglist; do
- ${SED} -n -e "/^# ### BEGIN LIBTOOL TAG CONFIG: $tagname$/,/^# ### END LIBTOOL TAG CONFIG: $tagname$/p" < "$progpath"
- done
- exit $?
- ;;
-
- --debug)
- $echo "$progname: enabling shell trace mode"
- set -x
- preserve_args="$preserve_args $arg"
- ;;
-
- --dry-run | -n)
- run=:
- ;;
-
- --features)
- $echo "host: $host"
- if test "$build_libtool_libs" = yes; then
- $echo "enable shared libraries"
- else
- $echo "disable shared libraries"
- fi
- if test "$build_old_libs" = yes; then
- $echo "enable static libraries"
- else
- $echo "disable static libraries"
- fi
- exit $?
- ;;
-
- --finish) mode="finish" ;;
-
- --mode) prevopt="--mode" prev=mode ;;
- --mode=*) mode="$optarg" ;;
-
- --preserve-dup-deps) duplicate_deps="yes" ;;
-
- --quiet | --silent)
- show=:
- preserve_args="$preserve_args $arg"
- ;;
-
- --tag) prevopt="--tag" prev=tag ;;
- --tag=*)
- set tag "$optarg" ${1+"$@"}
- shift
- prev=tag
- preserve_args="$preserve_args --tag"
- ;;
-
- -dlopen)
- prevopt="-dlopen"
- prev=execute_dlfiles
- ;;
-
- -*)
- $echo "$modename: unrecognized option \`$arg'" 1>&2
- $echo "$help" 1>&2
- exit $EXIT_FAILURE
- ;;
-
- *)
- nonopt="$arg"
- break
- ;;
- esac
-done
-
-if test -n "$prevopt"; then
- $echo "$modename: option \`$prevopt' requires an argument" 1>&2
- $echo "$help" 1>&2
- exit $EXIT_FAILURE
-fi
-
-# If this variable is set in any of the actions, the command in it
-# will be execed at the end. This prevents here-documents from being
-# left over by shells.
-exec_cmd=
-
-if test -z "$show_help"; then
-
- # Infer the operation mode.
- if test -z "$mode"; then
- $echo "*** Warning: inferring the mode of operation is deprecated." 1>&2
- $echo "*** Future versions of Libtool will require --mode=MODE be specified." 1>&2
- case $nonopt in
- *cc | cc* | *++ | gcc* | *-gcc* | g++* | xlc*)
- mode=link
- for arg
- do
- case $arg in
- -c)
- mode=compile
- break
- ;;
- esac
- done
- ;;
- *db | *dbx | *strace | *truss)
- mode=execute
- ;;
- *install*|cp|mv)
- mode=install
- ;;
- *rm)
- mode=uninstall
- ;;
- *)
- # If we have no mode, but dlfiles were specified, then do execute mode.
- test -n "$execute_dlfiles" && mode=execute
-
- # Just use the default operation mode.
- if test -z "$mode"; then
- if test -n "$nonopt"; then
- $echo "$modename: warning: cannot infer operation mode from \`$nonopt'" 1>&2
- else
- $echo "$modename: warning: cannot infer operation mode without MODE-ARGS" 1>&2
- fi
- fi
- ;;
- esac
- fi
-
- # Only execute mode is allowed to have -dlopen flags.
- if test -n "$execute_dlfiles" && test "$mode" != execute; then
- $echo "$modename: unrecognized option \`-dlopen'" 1>&2
- $echo "$help" 1>&2
- exit $EXIT_FAILURE
- fi
-
- # Change the help message to a mode-specific one.
- generic_help="$help"
- help="Try \`$modename --help --mode=$mode' for more information."
-
- # These modes are in order of execution frequency so that they run quickly.
- case $mode in
- # libtool compile mode
- compile)
- modename="$modename: compile"
- # Get the compilation command and the source file.
- base_compile=
- srcfile="$nonopt" # always keep a non-empty value in "srcfile"
- suppress_opt=yes
- suppress_output=
- arg_mode=normal
- libobj=
- later=
-
- for arg
- do
- case "$arg_mode" in
- arg )
- # do not "continue". Instead, add this to base_compile
- lastarg="$arg"
- arg_mode=normal
- ;;
-
- target )
- libobj="$arg"
- arg_mode=normal
- continue
- ;;
-
- normal )
- # Accept any command-line options.
- case $arg in
- -o)
- if test -n "$libobj" ; then
- $echo "$modename: you cannot specify \`-o' more than once" 1>&2
- exit $EXIT_FAILURE
- fi
- arg_mode=target
- continue
- ;;
-
- -static | -prefer-pic | -prefer-non-pic)
- later="$later $arg"
- continue
- ;;
-
- -no-suppress)
- suppress_opt=no
- continue
- ;;
-
- -Xcompiler)
- arg_mode=arg # the next one goes into the "base_compile" arg list
- continue # The current "srcfile" will either be retained or
- ;; # replaced later. I would guess that would be a bug.
-
- -Wc,*)
- args=`$echo "X$arg" | $Xsed -e "s/^-Wc,//"`
- lastarg=
- save_ifs="$IFS"; IFS=','
- for arg in $args; do
- IFS="$save_ifs"
-
- # Double-quote args containing other shell metacharacters.
- # Many Bourne shells cannot handle close brackets correctly
- # in scan sets, so we specify it separately.
- case $arg in
- *$quote_scanset* | *]* | *\|* | *\&* | *\(* | *\)* | "")
- arg="\"$arg\""
- ;;
- esac
- lastarg="$lastarg $arg"
- done
- IFS="$save_ifs"
- lastarg=`$echo "X$lastarg" | $Xsed -e "s/^ //"`
-
- # Add the arguments to base_compile.
- base_compile="$base_compile $lastarg"
- continue
- ;;
-
- * )
- # Accept the current argument as the source file.
- # The previous "srcfile" becomes the current argument.
- #
- lastarg="$srcfile"
- srcfile="$arg"
- ;;
- esac # case $arg
- ;;
- esac # case $arg_mode
-
- # Aesthetically quote the previous argument.
- lastarg=`$echo "X$lastarg" | $Xsed -e "$sed_quote_subst"`
-
- case $lastarg in
- # Double-quote args containing other shell metacharacters.
- # Many Bourne shells cannot handle close brackets correctly
- # in scan sets, and some SunOS ksh mistreat backslash-escaping
- # in scan sets (worked around with variable expansion),
- # and furthermore cannot handle '|' '&' '(' ')' in scan sets
- # at all, so we specify them separately.
- *$quote_scanset* | *]* | *\|* | *\&* | *\(* | *\)* | "")
- lastarg="\"$lastarg\""
- ;;
- esac
-
- base_compile="$base_compile $lastarg"
- done # for arg
-
- case $arg_mode in
- arg)
- $echo "$modename: you must specify an argument for -Xcompile"
- exit $EXIT_FAILURE
- ;;
- target)
- $echo "$modename: you must specify a target with \`-o'" 1>&2
- exit $EXIT_FAILURE
- ;;
- *)
- # Get the name of the library object.
- [ -z "$libobj" ] && libobj=`$echo "X$srcfile" | $Xsed -e 's%^.*/%%'`
- ;;
- esac
-
- # Recognize several different file suffixes.
- # If the user specifies -o file.o, it is replaced with file.lo
- xform='[cCFSifmso]'
- case $libobj in
- *.ada) xform=ada ;;
- *.adb) xform=adb ;;
- *.ads) xform=ads ;;
- *.asm) xform=asm ;;
- *.c++) xform=c++ ;;
- *.cc) xform=cc ;;
- *.ii) xform=ii ;;
- *.class) xform=class ;;
- *.cpp) xform=cpp ;;
- *.cxx) xform=cxx ;;
- *.f90) xform=f90 ;;
- *.for) xform=for ;;
- *.java) xform=java ;;
- esac
-
- libobj=`$echo "X$libobj" | $Xsed -e "s/\.$xform$/.lo/"`
-
- case $libobj in
- *.lo) obj=`$echo "X$libobj" | $Xsed -e "$lo2o"` ;;
- *)
- $echo "$modename: cannot determine name of library object from \`$libobj'" 1>&2
- exit $EXIT_FAILURE
- ;;
- esac
-
- func_infer_tag $base_compile
-
- for arg in $later; do
- case $arg in
- -static)
- build_old_libs=yes
- continue
- ;;
-
- -prefer-pic)
- pic_mode=yes
- continue
- ;;
-
- -prefer-non-pic)
- pic_mode=no
- continue
- ;;
- esac
- done
-
- qlibobj=`$echo "X$libobj" | $Xsed -e "$sed_quote_subst"`
- case $qlibobj in
- *$quote_scanset* | *]* | *\|* | *\&* | *\(* | *\)* | "")
- qlibobj="\"$qlibobj\"" ;;
- esac
- if test "X$libobj" != "X$qlibobj"; then
- $echo "$modename: libobj name \`$libobj' may not contain shell special characters."
- exit $EXIT_FAILURE
- fi
- objname=`$echo "X$obj" | $Xsed -e 's%^.*/%%'`
- xdir=`$echo "X$obj" | $Xsed -e 's%/[^/]*$%%'`
- if test "X$xdir" = "X$obj"; then
- xdir=
- else
- xdir=$xdir/
- fi
- lobj=${xdir}$objdir/$objname
-
- if test -z "$base_compile"; then
- $echo "$modename: you must specify a compilation command" 1>&2
- $echo "$help" 1>&2
- exit $EXIT_FAILURE
- fi
-
- # Delete any leftover library objects.
- if test "$build_old_libs" = yes; then
- removelist="$obj $lobj $libobj ${libobj}T"
- else
- removelist="$lobj $libobj ${libobj}T"
- fi
-
- $run $rm $removelist
- trap "$run $rm $removelist; exit $EXIT_FAILURE" 1 2 15
-
- # On Cygwin there's no "real" PIC flag so we must build both object types
- case $host_os in
- cygwin* | mingw* | pw32* | os2*)
- pic_mode=default
- ;;
- esac
- if test "$pic_mode" = no && test "$deplibs_check_method" != pass_all; then
- # non-PIC code in shared libraries is not supported
- pic_mode=default
- fi
-
- # Calculate the filename of the output object if compiler does
- # not support -o with -c
- if test "$compiler_c_o" = no; then
- output_obj=`$echo "X$srcfile" | $Xsed -e 's%^.*/%%' -e 's%\.[^.]*$%%'`.${objext}
- lockfile="$output_obj.lock"
- removelist="$removelist $output_obj $lockfile"
- trap "$run $rm $removelist; exit $EXIT_FAILURE" 1 2 15
- else
- output_obj=
- need_locks=no
- lockfile=
- fi
-
- # Lock this critical section if it is needed
- # We use this script file to make the link, it avoids creating a new file
- if test "$need_locks" = yes; then
- until $run ln "$progpath" "$lockfile" 2>/dev/null; do
- $show "Waiting for $lockfile to be removed"
- sleep 2
- done
- elif test "$need_locks" = warn; then
- if test -f "$lockfile"; then
- $echo "\
-*** ERROR, $lockfile exists and contains:
-`cat $lockfile 2>/dev/null`
-
-This indicates that another process is trying to use the same
-temporary object file, and libtool could not work around it because
-your compiler does not support \`-c' and \`-o' together. If you
-repeat this compilation, it may succeed, by chance, but you had better
-avoid parallel builds (make -j) in this platform, or get a better
-compiler."
-
- $run $rm $removelist
- exit $EXIT_FAILURE
- fi
- $echo "$srcfile" > "$lockfile"
- fi
-
- if test -n "$fix_srcfile_path"; then
- eval srcfile=\"$fix_srcfile_path\"
- fi
- qsrcfile=`$echo "X$srcfile" | $Xsed -e "$sed_quote_subst"`
- case $qsrcfile in
- *$quote_scanset* | *]* | *\|* | *\&* | *\(* | *\)* | "")
- qsrcfile="\"$qsrcfile\"" ;;
- esac
-
- $run $rm "$libobj" "${libobj}T"
-
- # Create a libtool object file (analogous to a ".la" file),
- # but don't create it if we're doing a dry run.
- test -z "$run" && cat > ${libobj}T <<EOF
-# $libobj - a libtool object file
-# Generated by $PROGRAM - GNU $PACKAGE $VERSION$TIMESTAMP
-#
-# Please DO NOT delete this file!
-# It is necessary for linking the library.
-
-# Name of the PIC object.
-EOF
-
- # Only build a PIC object if we are building libtool libraries.
- if test "$build_libtool_libs" = yes; then
- # Without this assignment, base_compile gets emptied.
- fbsd_hideous_sh_bug=$base_compile
-
- if test "$pic_mode" != no; then
- command="$base_compile $qsrcfile $pic_flag"
- else
- # Don't build PIC code
- command="$base_compile $qsrcfile"
- fi
-
- if test ! -d "${xdir}$objdir"; then
- $show "$mkdir ${xdir}$objdir"
- $run $mkdir ${xdir}$objdir
- status=$?
- if test "$status" -ne 0 && test ! -d "${xdir}$objdir"; then
- exit $status
- fi
- fi
-
- if test -z "$output_obj"; then
- # Place PIC objects in $objdir
- command="$command -o $lobj"
- fi
-
- $run $rm "$lobj" "$output_obj"
-
- $show "$command"
- if $run eval "$command"; then :
- else
- test -n "$output_obj" && $run $rm $removelist
- exit $EXIT_FAILURE
- fi
-
- if test "$need_locks" = warn &&
- test "X`cat $lockfile 2>/dev/null`" != "X$srcfile"; then
- $echo "\
-*** ERROR, $lockfile contains:
-`cat $lockfile 2>/dev/null`
-
-but it should contain:
-$srcfile
-
-This indicates that another process is trying to use the same
-temporary object file, and libtool could not work around it because
-your compiler does not support \`-c' and \`-o' together. If you
-repeat this compilation, it may succeed, by chance, but you had better
-avoid parallel builds (make -j) in this platform, or get a better
-compiler."
-
- $run $rm $removelist
- exit $EXIT_FAILURE
- fi
-
- # Just move the object if needed, then go on to compile the next one
- if test -n "$output_obj" && test "X$output_obj" != "X$lobj"; then
- $show "$mv $output_obj $lobj"
- if $run $mv $output_obj $lobj; then :
- else
- error=$?
- $run $rm $removelist
- exit $error
- fi
- fi
-
- # Append the name of the PIC object to the libtool object file.
- test -z "$run" && cat >> ${libobj}T <<EOF
-pic_object='$objdir/$objname'
-
-EOF
-
- # Allow error messages only from the first compilation.
- if test "$suppress_opt" = yes; then
- suppress_output=' >/dev/null 2>&1'
- fi
- else
- # No PIC object so indicate it doesn't exist in the libtool
- # object file.
- test -z "$run" && cat >> ${libobj}T <<EOF
-pic_object=none
-
-EOF
- fi
-
- # Only build a position-dependent object if we build old libraries.
- if test "$build_old_libs" = yes; then
- if test "$pic_mode" != yes; then
- # Don't build PIC code
- command="$base_compile $qsrcfile"
- else
- command="$base_compile $qsrcfile $pic_flag"
- fi
- if test "$compiler_c_o" = yes; then
- command="$command -o $obj"
- fi
-
- # Suppress compiler output if we already did a PIC compilation.
- command="$command$suppress_output"
- $run $rm "$obj" "$output_obj"
- $show "$command"
- if $run eval "$command"; then :
- else
- $run $rm $removelist
- exit $EXIT_FAILURE
- fi
-
- if test "$need_locks" = warn &&
- test "X`cat $lockfile 2>/dev/null`" != "X$srcfile"; then
- $echo "\
-*** ERROR, $lockfile contains:
-`cat $lockfile 2>/dev/null`
-
-but it should contain:
-$srcfile
-
-This indicates that another process is trying to use the same
-temporary object file, and libtool could not work around it because
-your compiler does not support \`-c' and \`-o' together. If you
-repeat this compilation, it may succeed, by chance, but you had better
-avoid parallel builds (make -j) in this platform, or get a better
-compiler."
-
- $run $rm $removelist
- exit $EXIT_FAILURE
- fi
-
- # Just move the object if needed
- if test -n "$output_obj" && test "X$output_obj" != "X$obj"; then
- $show "$mv $output_obj $obj"
- if $run $mv $output_obj $obj; then :
- else
- error=$?
- $run $rm $removelist
- exit $error
- fi
- fi
-
- # Append the name of the non-PIC object the libtool object file.
- # Only append if the libtool object file exists.
- test -z "$run" && cat >> ${libobj}T <<EOF
-# Name of the non-PIC object.
-non_pic_object='$objname'
-
-EOF
- else
- # Append the name of the non-PIC object the libtool object file.
- # Only append if the libtool object file exists.
- test -z "$run" && cat >> ${libobj}T <<EOF
-# Name of the non-PIC object.
-non_pic_object=none
-
-EOF
- fi
-
- $run $mv "${libobj}T" "${libobj}"
-
- # Unlock the critical section if it was locked
- if test "$need_locks" != no; then
- $run $rm "$lockfile"
- fi
-
- exit $EXIT_SUCCESS
- ;;
-
- # libtool link mode
- link | relink)
- modename="$modename: link"
- case $host in
- *-*-cygwin* | *-*-mingw* | *-*-pw32* | *-*-os2*)
- # It is impossible to link a dll without this setting, and
- # we shouldn't force the makefile maintainer to figure out
- # which system we are compiling for in order to pass an extra
- # flag for every libtool invocation.
- # allow_undefined=no
-
- # FIXME: Unfortunately, there are problems with the above when trying
- # to make a dll which has undefined symbols, in which case not
- # even a static library is built. For now, we need to specify
- # -no-undefined on the libtool link line when we can be certain
- # that all symbols are satisfied, otherwise we get a static library.
- allow_undefined=yes
- ;;
- *)
- allow_undefined=yes
- ;;
- esac
- libtool_args="$nonopt"
- base_compile="$nonopt $@"
- compile_command="$nonopt"
- finalize_command="$nonopt"
-
- compile_rpath=
- finalize_rpath=
- compile_shlibpath=
- finalize_shlibpath=
- convenience=
- old_convenience=
- deplibs=
- old_deplibs=
- compiler_flags=
- linker_flags=
- dllsearchpath=
- lib_search_path=`pwd`
- inst_prefix_dir=
-
- avoid_version=no
- dlfiles=
- dlprefiles=
- dlself=no
- export_dynamic=no
- export_symbols=
- export_symbols_regex=
- generated=
- libobjs=
- ltlibs=
- module=no
- no_install=no
- objs=
- non_pic_objects=
- precious_files_regex=
- prefer_static_libs=no
- preload=no
- prev=
- prevarg=
- release=
- rpath=
- xrpath=
- perm_rpath=
- temp_rpath=
- thread_safe=no
- vinfo=
- vinfo_number=no
-
- func_infer_tag $base_compile
-
- # We need to know -static, to get the right output filenames.
- for arg
- do
- case $arg in
- -all-static | -static)
- if test "X$arg" = "X-all-static"; then
- if test "$build_libtool_libs" = yes && test -z "$link_static_flag"; then
- $echo "$modename: warning: complete static linking is impossible in this configuration" 1>&2
- fi
- if test -n "$link_static_flag"; then
- dlopen_self=$dlopen_self_static
- fi
- else
- if test -z "$pic_flag" && test -n "$link_static_flag"; then
- dlopen_self=$dlopen_self_static
- fi
- fi
- build_libtool_libs=no
- build_old_libs=yes
- prefer_static_libs=yes
- break
- ;;
- esac
- done
-
- # See if our shared archives depend on static archives.
- test -n "$old_archive_from_new_cmds" && build_old_libs=yes
-
- # Go through the arguments, transforming them on the way.
- while test "$#" -gt 0; do
- arg="$1"
- shift
- case $arg in
- *$quote_scanset* | *]* | *\|* | *\&* | *\(* | *\)* | "")
- qarg=\"`$echo "X$arg" | $Xsed -e "$sed_quote_subst"`\" ### testsuite: skip nested quoting test
- ;;
- *) qarg=$arg ;;
- esac
- libtool_args="$libtool_args $qarg"
-
- # If the previous option needs an argument, assign it.
- if test -n "$prev"; then
- case $prev in
- output)
- compile_command="$compile_command @OUTPUT@"
- finalize_command="$finalize_command @OUTPUT@"
- ;;
- esac
-
- case $prev in
- dlfiles|dlprefiles)
- if test "$preload" = no; then
- # Add the symbol object into the linking commands.
- compile_command="$compile_command @SYMFILE@"
- finalize_command="$finalize_command @SYMFILE@"
- preload=yes
- fi
- case $arg in
- *.la | *.lo) ;; # We handle these cases below.
- force)
- if test "$dlself" = no; then
- dlself=needless
- export_dynamic=yes
- fi
- prev=
- continue
- ;;
- self)
- if test "$prev" = dlprefiles; then
- dlself=yes
- elif test "$prev" = dlfiles && test "$dlopen_self" != yes; then
- dlself=yes
- else
- dlself=needless
- export_dynamic=yes
- fi
- prev=
- continue
- ;;
- *)
- if test "$prev" = dlfiles; then
- dlfiles="$dlfiles $arg"
- else
- dlprefiles="$dlprefiles $arg"
- fi
- prev=
- continue
- ;;
- esac
- ;;
- expsyms)
- export_symbols="$arg"
- if test ! -f "$arg"; then
- $echo "$modename: symbol file \`$arg' does not exist"
- exit $EXIT_FAILURE
- fi
- prev=
- continue
- ;;
- expsyms_regex)
- export_symbols_regex="$arg"
- prev=
- continue
- ;;
- inst_prefix)
- inst_prefix_dir="$arg"
- prev=
- continue
- ;;
- precious_regex)
- precious_files_regex="$arg"
- prev=
- continue
- ;;
- release)
- release="-$arg"
- prev=
- continue
- ;;
- objectlist)
- if test -f "$arg"; then
- save_arg=$arg
- moreargs=
- for fil in `cat $save_arg`
- do
-# moreargs="$moreargs $fil"
- arg=$fil
- # A libtool-controlled object.
-
- # Check to see that this really is a libtool object.
- if (${SED} -e '2q' $arg | grep "^# Generated by .*$PACKAGE") >/dev/null 2>&1; then
- pic_object=
- non_pic_object=
-
- # Read the .lo file
- # If there is no directory component, then add one.
- case $arg in
- */* | *\\*) . $arg ;;
- *) . ./$arg ;;
- esac
-
- if test -z "$pic_object" || \
- test -z "$non_pic_object" ||
- test "$pic_object" = none && \
- test "$non_pic_object" = none; then
- $echo "$modename: cannot find name of object for \`$arg'" 1>&2
- exit $EXIT_FAILURE
- fi
-
- # Extract subdirectory from the argument.
- xdir=`$echo "X$arg" | $Xsed -e 's%/[^/]*$%%'`
- if test "X$xdir" = "X$arg"; then
- xdir=
- else
- xdir="$xdir/"
- fi
-
- if test "$pic_object" != none; then
- # Prepend the subdirectory the object is found in.
- pic_object="$xdir$pic_object"
-
- if test "$prev" = dlfiles; then
- if test "$build_libtool_libs" = yes && test "$dlopen_support" = yes; then
- dlfiles="$dlfiles $pic_object"
- prev=
- continue
- else
- # If libtool objects are unsupported, then we need to preload.
- prev=dlprefiles
- fi
- fi
-
- # CHECK ME: I think I busted this. -Ossama
- if test "$prev" = dlprefiles; then
- # Preload the old-style object.
- dlprefiles="$dlprefiles $pic_object"
- prev=
- fi
-
- # A PIC object.
- libobjs="$libobjs $pic_object"
- arg="$pic_object"
- fi
-
- # Non-PIC object.
- if test "$non_pic_object" != none; then
- # Prepend the subdirectory the object is found in.
- non_pic_object="$xdir$non_pic_object"
-
- # A standard non-PIC object
- non_pic_objects="$non_pic_objects $non_pic_object"
- if test -z "$pic_object" || test "$pic_object" = none ; then
- arg="$non_pic_object"
- fi
- fi
- else
- # Only an error if not doing a dry-run.
- if test -z "$run"; then
- $echo "$modename: \`$arg' is not a valid libtool object" 1>&2
- exit $EXIT_FAILURE
- else
- # Dry-run case.
-
- # Extract subdirectory from the argument.
- xdir=`$echo "X$arg" | $Xsed -e 's%/[^/]*$%%'`
- if test "X$xdir" = "X$arg"; then
- xdir=
- else
- xdir="$xdir/"
- fi
-
- pic_object=`$echo "X${xdir}${objdir}/${arg}" | $Xsed -e "$lo2o"`
- non_pic_object=`$echo "X${xdir}${arg}" | $Xsed -e "$lo2o"`
- libobjs="$libobjs $pic_object"
- non_pic_objects="$non_pic_objects $non_pic_object"
- fi
- fi
- done
- else
- $echo "$modename: link input file \`$save_arg' does not exist"
- exit $EXIT_FAILURE
- fi
- arg=$save_arg
- prev=
- continue
- ;;
- rpath | xrpath)
- # We need an absolute path.
- case $arg in
- [\\/]* | [A-Za-z]:[\\/]*) ;;
- *)
- $echo "$modename: only absolute run-paths are allowed" 1>&2
- exit $EXIT_FAILURE
- ;;
- esac
- if test "$prev" = rpath; then
- case "$rpath " in
- *" $arg "*) ;;
- *) rpath="$rpath $arg" ;;
- esac
- else
- case "$xrpath " in
- *" $arg "*) ;;
- *) xrpath="$xrpath $arg" ;;
- esac
- fi
- prev=
- continue
- ;;
- xcompiler)
- compiler_flags="$compiler_flags $qarg"
- prev=
- compile_command="$compile_command $qarg"
- finalize_command="$finalize_command $qarg"
- continue
- ;;
- xlinker)
- linker_flags="$linker_flags $qarg"
- compiler_flags="$compiler_flags $wl$qarg"
- prev=
- compile_command="$compile_command $wl$qarg"
- finalize_command="$finalize_command $wl$qarg"
- continue
- ;;
- xcclinker)
- linker_flags="$linker_flags $qarg"
- compiler_flags="$compiler_flags $qarg"
- prev=
- compile_command="$compile_command $qarg"
- finalize_command="$finalize_command $qarg"
- continue
- ;;
- shrext)
- shrext_cmds="$arg"
- prev=
- continue
- ;;
- darwin_framework)
- compiler_flags="$compiler_flags $arg"
- compile_command="$compile_command $arg"
- finalize_command="$finalize_command $arg"
- prev=
- continue
- ;;
- *)
- eval "$prev=\"\$arg\""
- prev=
- continue
- ;;
- esac
- fi # test -n "$prev"
-
- prevarg="$arg"
-
- case $arg in
- -all-static)
- if test -n "$link_static_flag"; then
- compile_command="$compile_command $link_static_flag"
- finalize_command="$finalize_command $link_static_flag"
- fi
- continue
- ;;
-
- -allow-undefined)
- # FIXME: remove this flag sometime in the future.
- $echo "$modename: \`-allow-undefined' is deprecated because it is the default" 1>&2
- continue
- ;;
-
- -avoid-version)
- avoid_version=yes
- continue
- ;;
-
- -dlopen)
- prev=dlfiles
- continue
- ;;
-
- -dlpreopen)
- prev=dlprefiles
- continue
- ;;
-
- -export-dynamic)
- export_dynamic=yes
- continue
- ;;
-
- -export-symbols | -export-symbols-regex)
- if test -n "$export_symbols" || test -n "$export_symbols_regex"; then
- $echo "$modename: more than one -exported-symbols argument is not allowed"
- exit $EXIT_FAILURE
- fi
- if test "X$arg" = "X-export-symbols"; then
- prev=expsyms
- else
- prev=expsyms_regex
- fi
- continue
- ;;
-
- -framework)
- prev=darwin_framework
- compiler_flags="$compiler_flags $arg"
- compile_command="$compile_command $arg"
- finalize_command="$finalize_command $arg"
- continue
- ;;
-
- -inst-prefix-dir)
- prev=inst_prefix
- continue
- ;;
-
- # The native IRIX linker understands -LANG:*, -LIST:* and -LNO:*
- # so, if we see these flags be careful not to treat them like -L
- -L[A-Z][A-Z]*:*)
- case $with_gcc/$host in
- no/*-*-irix* | /*-*-irix*)
- compile_command="$compile_command $arg"
- finalize_command="$finalize_command $arg"
- ;;
- esac
- continue
- ;;
-
- -L*)
- dir=`$echo "X$arg" | $Xsed -e 's/^-L//'`
- # We need an absolute path.
- case $dir in
- [\\/]* | [A-Za-z]:[\\/]*) ;;
- *)
- absdir=`cd "$dir" && pwd`
- if test -z "$absdir"; then
- $echo "$modename: cannot determine absolute directory name of \`$dir'" 1>&2
- exit $EXIT_FAILURE
- fi
- dir="$absdir"
- ;;
- esac
- case "$deplibs " in
- *" -L$dir "*) ;;
- *)
- deplibs="$deplibs -L$dir"
- lib_search_path="$lib_search_path $dir"
- ;;
- esac
- case $host in
- *-*-cygwin* | *-*-mingw* | *-*-pw32* | *-*-os2*)
- case :$dllsearchpath: in
- *":$dir:"*) ;;
- *) dllsearchpath="$dllsearchpath:$dir";;
- esac
- ;;
- esac
- continue
- ;;
-
- -l*)
- if test "X$arg" = "X-lc" || test "X$arg" = "X-lm"; then
- case $host in
- *-*-cygwin* | *-*-pw32* | *-*-beos*)
- # These systems don't actually have a C or math library (as such)
- continue
- ;;
- *-*-mingw* | *-*-os2*)
- # These systems don't actually have a C library (as such)
- test "X$arg" = "X-lc" && continue
- ;;
- *-*-openbsd* | *-*-freebsd* | *-*-dragonfly*)
- # Do not include libc due to us having libc/libc_r.
- test "X$arg" = "X-lc" && continue
- ;;
- *-*-rhapsody* | *-*-darwin1.[012])
- # Rhapsody C and math libraries are in the System framework
- deplibs="$deplibs -framework System"
- continue
- esac
- elif test "X$arg" = "X-lc_r"; then
- case $host in
- *-*-openbsd* | *-*-freebsd* | *-*-dragonfly*)
- # Do not include libc_r directly, use -pthread flag.
- continue
- ;;
- esac
- fi
- deplibs="$deplibs $arg"
- continue
- ;;
-
- # Tru64 UNIX uses -model [arg] to determine the layout of C++
- # classes, name mangling, and exception handling.
- -model)
- compile_command="$compile_command $arg"
- compiler_flags="$compiler_flags $arg"
- finalize_command="$finalize_command $arg"
- prev=xcompiler
- continue
- ;;
-
- -mt|-mthreads|-kthread|-Kthread|-pthread|-pthreads|--thread-safe)
- compiler_flags="$compiler_flags $arg"
- compile_command="$compile_command $arg"
- finalize_command="$finalize_command $arg"
- continue
- ;;
-
- -module)
- module=yes
- continue
- ;;
-
- # -64, -mips[0-9] enable 64-bit mode on the SGI compiler
- # -r[0-9][0-9]* specifies the processor on the SGI compiler
- # -xarch=*, -xtarget=* enable 64-bit mode on the Sun compiler
- # +DA*, +DD* enable 64-bit mode on the HP compiler
- # -q* pass through compiler args for the IBM compiler
- # -m* pass through architecture-specific compiler args for GCC
- -64|-mips[0-9]|-r[0-9][0-9]*|-xarch=*|-xtarget=*|+DA*|+DD*|-q*|-m*)
-
- # Unknown arguments in both finalize_command and compile_command need
- # to be aesthetically quoted because they are evaled later.
- arg=`$echo "X$arg" | $Xsed -e "$sed_quote_subst"`
- case $arg in
- *$quote_scanset* | *]* | *\|* | *\&* | *\(* | *\)* | "")
- arg="\"$arg\""
- ;;
- esac
- compile_command="$compile_command $arg"
- finalize_command="$finalize_command $arg"
- if test "$with_gcc" = "yes" ; then
- compiler_flags="$compiler_flags $arg"
- fi
- continue
- ;;
-
- -shrext)
- prev=shrext
- continue
- ;;
-
- -no-fast-install)
- fast_install=no
- continue
- ;;
-
- -no-install)
- case $host in
- *-*-cygwin* | *-*-mingw* | *-*-pw32* | *-*-os2*)
- # The PATH hackery in wrapper scripts is required on Windows
- # in order for the loader to find any dlls it needs.
- $echo "$modename: warning: \`-no-install' is ignored for $host" 1>&2
- $echo "$modename: warning: assuming \`-no-fast-install' instead" 1>&2
- fast_install=no
- ;;
- *) no_install=yes ;;
- esac
- continue
- ;;
-
- -no-undefined)
- allow_undefined=no
- continue
- ;;
-
- -objectlist)
- prev=objectlist
- continue
- ;;
-
- -o) prev=output ;;
-
- -precious-files-regex)
- prev=precious_regex
- continue
- ;;
-
- -release)
- prev=release
- continue
- ;;
-
- -rpath)
- prev=rpath
- continue
- ;;
-
- -R)
- prev=xrpath
- continue
- ;;
-
- -R*)
- dir=`$echo "X$arg" | $Xsed -e 's/^-R//'`
- # We need an absolute path.
- case $dir in
- [\\/]* | [A-Za-z]:[\\/]*) ;;
- *)
- $echo "$modename: only absolute run-paths are allowed" 1>&2
- exit $EXIT_FAILURE
- ;;
- esac
- case "$xrpath " in
- *" $dir "*) ;;
- *) xrpath="$xrpath $dir" ;;
- esac
- continue
- ;;
-
- -static)
- # The effects of -static are defined in a previous loop.
- # We used to do the same as -all-static on platforms that
- # didn't have a PIC flag, but the assumption that the effects
- # would be equivalent was wrong. It would break on at least
- # Digital Unix and AIX.
- continue
- ;;
-
- -thread-safe)
- thread_safe=yes
- continue
- ;;
-
- -version-info)
- prev=vinfo
- continue
- ;;
- -version-number)
- prev=vinfo
- vinfo_number=yes
- continue
- ;;
-
- -Wc,*)
- args=`$echo "X$arg" | $Xsed -e "$sed_quote_subst" -e 's/^-Wc,//'`
- arg=
- save_ifs="$IFS"; IFS=','
- for flag in $args; do
- IFS="$save_ifs"
- case $flag in
- *$quote_scanset* | *]* | *\|* | *\&* | *\(* | *\)* | "")
- flag="\"$flag\""
- ;;
- esac
- arg="$arg $wl$flag"
- compiler_flags="$compiler_flags $flag"
- done
- IFS="$save_ifs"
- arg=`$echo "X$arg" | $Xsed -e "s/^ //"`
- ;;
-
- -Wl,*)
- args=`$echo "X$arg" | $Xsed -e "$sed_quote_subst" -e 's/^-Wl,//'`
- arg=
- save_ifs="$IFS"; IFS=','
- for flag in $args; do
- IFS="$save_ifs"
- case $flag in
- *$quote_scanset* | *]* | *\|* | *\&* | *\(* | *\)* | "")
- flag="\"$flag\""
- ;;
- esac
- arg="$arg $wl$flag"
- compiler_flags="$compiler_flags $wl$flag"
- linker_flags="$linker_flags $flag"
- done
- IFS="$save_ifs"
- arg=`$echo "X$arg" | $Xsed -e "s/^ //"`
- ;;
-
- -Xcompiler)
- prev=xcompiler
- continue
- ;;
-
- -Xlinker)
- prev=xlinker
- continue
- ;;
-
- -XCClinker)
- prev=xcclinker
- continue
- ;;
-
- # Some other compiler flag.
- -* | +*)
- # Unknown arguments in both finalize_command and compile_command need
- # to be aesthetically quoted because they are evaled later.
- arg=`$echo "X$arg" | $Xsed -e "$sed_quote_subst"`
- case $arg in
- *$quote_scanset* | *]* | *\|* | *\&* | *\(* | *\)* | "")
- arg="\"$arg\""
- ;;
- esac
- ;;
-
- *.$objext)
- # A standard object.
- objs="$objs $arg"
- ;;
-
- *.lo)
- # A libtool-controlled object.
-
- # Check to see that this really is a libtool object.
- if (${SED} -e '2q' $arg | grep "^# Generated by .*$PACKAGE") >/dev/null 2>&1; then
- pic_object=
- non_pic_object=
-
- # Read the .lo file
- # If there is no directory component, then add one.
- case $arg in
- */* | *\\*) . $arg ;;
- *) . ./$arg ;;
- esac
-
- if test -z "$pic_object" || \
- test -z "$non_pic_object" ||
- test "$pic_object" = none && \
- test "$non_pic_object" = none; then
- $echo "$modename: cannot find name of object for \`$arg'" 1>&2
- exit $EXIT_FAILURE
- fi
-
- # Extract subdirectory from the argument.
- xdir=`$echo "X$arg" | $Xsed -e 's%/[^/]*$%%'`
- if test "X$xdir" = "X$arg"; then
- xdir=
- else
- xdir="$xdir/"
- fi
-
- if test "$pic_object" != none; then
- # Prepend the subdirectory the object is found in.
- pic_object="$xdir$pic_object"
-
- if test "$prev" = dlfiles; then
- if test "$build_libtool_libs" = yes && test "$dlopen_support" = yes; then
- dlfiles="$dlfiles $pic_object"
- prev=
- continue
- else
- # If libtool objects are unsupported, then we need to preload.
- prev=dlprefiles
- fi
- fi
-
- # CHECK ME: I think I busted this. -Ossama
- if test "$prev" = dlprefiles; then
- # Preload the old-style object.
- dlprefiles="$dlprefiles $pic_object"
- prev=
- fi
-
- # A PIC object.
- libobjs="$libobjs $pic_object"
- arg="$pic_object"
- fi
-
- # Non-PIC object.
- if test "$non_pic_object" != none; then
- # Prepend the subdirectory the object is found in.
- non_pic_object="$xdir$non_pic_object"
-
- # A standard non-PIC object
- non_pic_objects="$non_pic_objects $non_pic_object"
- if test -z "$pic_object" || test "$pic_object" = none ; then
- arg="$non_pic_object"
- fi
- fi
- else
- # Only an error if not doing a dry-run.
- if test -z "$run"; then
- $echo "$modename: \`$arg' is not a valid libtool object" 1>&2
- exit $EXIT_FAILURE
- else
- # Dry-run case.
-
- # Extract subdirectory from the argument.
- xdir=`$echo "X$arg" | $Xsed -e 's%/[^/]*$%%'`
- if test "X$xdir" = "X$arg"; then
- xdir=
- else
- xdir="$xdir/"
- fi
-
- pic_object=`$echo "X${xdir}${objdir}/${arg}" | $Xsed -e "$lo2o"`
- non_pic_object=`$echo "X${xdir}${arg}" | $Xsed -e "$lo2o"`
- libobjs="$libobjs $pic_object"
- non_pic_objects="$non_pic_objects $non_pic_object"
- fi
- fi
- ;;
-
- *.$libext)
- # An archive.
- deplibs="$deplibs $arg"
- old_deplibs="$old_deplibs $arg"
- continue
- ;;
-
- *.la)
- # A libtool-controlled library.
-
- if test "$prev" = dlfiles; then
- # This library was specified with -dlopen.
- dlfiles="$dlfiles $arg"
- prev=
- elif test "$prev" = dlprefiles; then
- # The library was specified with -dlpreopen.
- dlprefiles="$dlprefiles $arg"
- prev=
- else
- deplibs="$deplibs $arg"
- fi
- continue
- ;;
-
- # Some other compiler argument.
- *)
- # Unknown arguments in both finalize_command and compile_command need
- # to be aesthetically quoted because they are evaled later.
- arg=`$echo "X$arg" | $Xsed -e "$sed_quote_subst"`
- case $arg in
- *$quote_scanset* | *]* | *\|* | *\&* | *\(* | *\)* | "")
- arg="\"$arg\""
- ;;
- esac
- ;;
- esac # arg
-
- # Now actually substitute the argument into the commands.
- if test -n "$arg"; then
- compile_command="$compile_command $arg"
- finalize_command="$finalize_command $arg"
- fi
- done # argument parsing loop
-
- if test -n "$prev"; then
- $echo "$modename: the \`$prevarg' option requires an argument" 1>&2
- $echo "$help" 1>&2
- exit $EXIT_FAILURE
- fi
-
- if test "$export_dynamic" = yes && test -n "$export_dynamic_flag_spec"; then
- eval arg=\"$export_dynamic_flag_spec\"
- compile_command="$compile_command $arg"
- finalize_command="$finalize_command $arg"
- fi
-
- oldlibs=
- # calculate the name of the file, without its directory
- outputname=`$echo "X$output" | $Xsed -e 's%^.*/%%'`
- libobjs_save="$libobjs"
-
- if test -n "$shlibpath_var"; then
- # get the directories listed in $shlibpath_var
- eval shlib_search_path=\`\$echo \"X\${$shlibpath_var}\" \| \$Xsed -e \'s/:/ /g\'\`
- else
- shlib_search_path=
- fi
- eval sys_lib_search_path=\"$sys_lib_search_path_spec\"
- eval sys_lib_dlsearch_path=\"$sys_lib_dlsearch_path_spec\"
-
- output_objdir=`$echo "X$output" | $Xsed -e 's%/[^/]*$%%'`
- if test "X$output_objdir" = "X$output"; then
- output_objdir="$objdir"
- else
- output_objdir="$output_objdir/$objdir"
- fi
- # Create the object directory.
- if test ! -d "$output_objdir"; then
- $show "$mkdir $output_objdir"
- $run $mkdir $output_objdir
- status=$?
- if test "$status" -ne 0 && test ! -d "$output_objdir"; then
- exit $status
- fi
- fi
-
- # Determine the type of output
- case $output in
- "")
- $echo "$modename: you must specify an output file" 1>&2
- $echo "$help" 1>&2
- exit $EXIT_FAILURE
- ;;
- *.$libext) linkmode=oldlib ;;
- *.lo | *.$objext) linkmode=obj ;;
- *.la) linkmode=lib ;;
- *) linkmode=prog ;; # Anything else should be a program.
- esac
-
- case $host in
- *cygwin* | *mingw* | *pw32*)
- # don't eliminate duplications in $postdeps and $predeps
- duplicate_compiler_generated_deps=yes
- ;;
- *)
- duplicate_compiler_generated_deps=$duplicate_deps
- ;;
- esac
- specialdeplibs=
-
- libs=
- # Find all interdependent deplibs by searching for libraries
- # that are linked more than once (e.g. -la -lb -la)
- for deplib in $deplibs; do
- if test "X$duplicate_deps" = "Xyes" ; then
- case "$libs " in
- *" $deplib "*) specialdeplibs="$specialdeplibs $deplib" ;;
- esac
- fi
- libs="$libs $deplib"
- done
-
- if test "$linkmode" = lib; then
- libs="$predeps $libs $compiler_lib_search_path $postdeps"
-
- # Compute libraries that are listed more than once in $predeps
- # $postdeps and mark them as special (i.e., whose duplicates are
- # not to be eliminated).
- pre_post_deps=
- if test "X$duplicate_compiler_generated_deps" = "Xyes" ; then
- for pre_post_dep in $predeps $postdeps; do
- case "$pre_post_deps " in
- *" $pre_post_dep "*) specialdeplibs="$specialdeplibs $pre_post_deps" ;;
- esac
- pre_post_deps="$pre_post_deps $pre_post_dep"
- done
- fi
- pre_post_deps=
- fi
-
- deplibs=
- newdependency_libs=
- newlib_search_path=
- need_relink=no # whether we're linking any uninstalled libtool libraries
- notinst_deplibs= # not-installed libtool libraries
- notinst_path= # paths that contain not-installed libtool libraries
- case $linkmode in
- lib)
- passes="conv link"
- for file in $dlfiles $dlprefiles; do
- case $file in
- *.la) ;;
- *)
- $echo "$modename: libraries can \`-dlopen' only libtool libraries: $file" 1>&2
- exit $EXIT_FAILURE
- ;;
- esac
- done
- ;;
- prog)
- compile_deplibs=
- finalize_deplibs=
- alldeplibs=no
- newdlfiles=
- newdlprefiles=
- passes="conv scan dlopen dlpreopen link"
- ;;
- *) passes="conv"
- ;;
- esac
- for pass in $passes; do
- if test "$linkmode,$pass" = "lib,link" ||
- test "$linkmode,$pass" = "prog,scan"; then
- libs="$deplibs"
- deplibs=
- fi
- if test "$linkmode" = prog; then
- case $pass in
- dlopen) libs="$dlfiles" ;;
- dlpreopen) libs="$dlprefiles" ;;
- link) libs="$deplibs %DEPLIBS% $dependency_libs" ;;
- esac
- fi
- if test "$pass" = dlopen; then
- # Collect dlpreopened libraries
- save_deplibs="$deplibs"
- deplibs=
- fi
- for deplib in $libs; do
- lib=
- found=no
- case $deplib in
- -mt|-mthreads|-kthread|-Kthread|-pthread|-pthreads|--thread-safe)
- if test "$linkmode,$pass" = "prog,link"; then
- compile_deplibs="$deplib $compile_deplibs"
- finalize_deplibs="$deplib $finalize_deplibs"
- else
- compiler_flags="$compiler_flags $deplib"
- fi
- continue
- ;;
- -l*)
- if test "$linkmode" != lib && test "$linkmode" != prog; then
- $echo "$modename: warning: \`-l' is ignored for archives/objects" 1>&2
- continue
- fi
- name=`$echo "X$deplib" | $Xsed -e 's/^-l//'`
- for searchdir in $newlib_search_path $lib_search_path $sys_lib_search_path $shlib_search_path; do
- for search_ext in .la $std_shrext .so .a; do
- # Search the libtool library
- lib="$searchdir/lib${name}${search_ext}"
- if test -f "$lib"; then
- if test "$search_ext" = ".la"; then
- found=yes
- else
- found=no
- fi
- break 2
- fi
- done
- done
- if test "$found" != yes; then
- # deplib doesn't seem to be a libtool library
- if test "$linkmode,$pass" = "prog,link"; then
- compile_deplibs="$deplib $compile_deplibs"
- finalize_deplibs="$deplib $finalize_deplibs"
- else
- deplibs="$deplib $deplibs"
- test "$linkmode" = lib && newdependency_libs="$deplib $newdependency_libs"
- fi
- continue
- else # deplib is a libtool library
- # If $allow_libtool_libs_with_static_runtimes && $deplib is a stdlib,
- # We need to do some special things here, and not later.
- if test "X$allow_libtool_libs_with_static_runtimes" = "Xyes" ; then
- case " $predeps $postdeps " in
- *" $deplib "*)
- if (${SED} -e '2q' $lib |
- grep "^# Generated by .*$PACKAGE") >/dev/null 2>&1; then
- library_names=
- old_library=
- case $lib in
- */* | *\\*) . $lib ;;
- *) . ./$lib ;;
- esac
- for l in $old_library $library_names; do
- ll="$l"
- done
- if test "X$ll" = "X$old_library" ; then # only static version available
- found=no
- ladir=`$echo "X$lib" | $Xsed -e 's%/[^/]*$%%'`
- test "X$ladir" = "X$lib" && ladir="."
- lib=$ladir/$old_library
- if test "$linkmode,$pass" = "prog,link"; then
- compile_deplibs="$deplib $compile_deplibs"
- finalize_deplibs="$deplib $finalize_deplibs"
- else
- deplibs="$deplib $deplibs"
- test "$linkmode" = lib && newdependency_libs="$deplib $newdependency_libs"
- fi
- continue
- fi
- fi
- ;;
- *) ;;
- esac
- fi
- fi
- ;; # -l
- -L*)
- case $linkmode in
- lib)
- deplibs="$deplib $deplibs"
- test "$pass" = conv && continue
- newdependency_libs="$deplib $newdependency_libs"
- newlib_search_path="$newlib_search_path "`$echo "X$deplib" | $Xsed -e 's/^-L//'`
- ;;
- prog)
- if test "$pass" = conv; then
- deplibs="$deplib $deplibs"
- continue
- fi
- if test "$pass" = scan; then
- deplibs="$deplib $deplibs"
- else
- compile_deplibs="$deplib $compile_deplibs"
- finalize_deplibs="$deplib $finalize_deplibs"
- fi
- newlib_search_path="$newlib_search_path "`$echo "X$deplib" | $Xsed -e 's/^-L//'`
- ;;
- *)
- $echo "$modename: warning: \`-L' is ignored for archives/objects" 1>&2
- ;;
- esac # linkmode
- continue
- ;; # -L
- -R*)
- if test "$pass" = link; then
- dir=`$echo "X$deplib" | $Xsed -e 's/^-R//'`
- # Make sure the xrpath contains only unique directories.
- case "$xrpath " in
- *" $dir "*) ;;
- *) xrpath="$xrpath $dir" ;;
- esac
- fi
- deplibs="$deplib $deplibs"
- continue
- ;;
- *.la) lib="$deplib" ;;
- *.$libext)
- if test "$pass" = conv; then
- deplibs="$deplib $deplibs"
- continue
- fi
- case $linkmode in
- lib)
- valid_a_lib=no
- case $deplibs_check_method in
- match_pattern*)
- set dummy $deplibs_check_method
- match_pattern_regex=`expr "$deplibs_check_method" : "$2 \(.*\)"`
- if eval $echo \"$deplib\" 2>/dev/null \
- | $SED 10q \
- | $EGREP "$match_pattern_regex" > /dev/null; then
- valid_a_lib=yes
- fi
- ;;
- pass_all)
- valid_a_lib=yes
- ;;
- esac
- if test "$valid_a_lib" != yes; then
- $echo
- $echo "*** Warning: Trying to link with static lib archive $deplib."
- $echo "*** I have the capability to make that library automatically link in when"
- $echo "*** you link to this library. But I can only do this if you have a"
- $echo "*** shared version of the library, which you do not appear to have"
- $echo "*** because the file extensions .$libext of this argument makes me believe"
- $echo "*** that it is just a static archive that I should not used here."
- else
- $echo
- $echo "*** Warning: Linking the shared library $output against the"
- $echo "*** static library $deplib is not portable!"
- deplibs="$deplib $deplibs"
- fi
- continue
- ;;
- prog)
- if test "$pass" != link; then
- deplibs="$deplib $deplibs"
- else
- compile_deplibs="$deplib $compile_deplibs"
- finalize_deplibs="$deplib $finalize_deplibs"
- fi
- continue
- ;;
- esac # linkmode
- ;; # *.$libext
- *.lo | *.$objext)
- if test "$pass" = conv; then
- deplibs="$deplib $deplibs"
- elif test "$linkmode" = prog; then
- if test "$pass" = dlpreopen || test "$dlopen_support" != yes || test "$build_libtool_libs" = no; then
- # If there is no dlopen support or we're linking statically,
- # we need to preload.
- newdlprefiles="$newdlprefiles $deplib"
- compile_deplibs="$deplib $compile_deplibs"
- finalize_deplibs="$deplib $finalize_deplibs"
- else
- newdlfiles="$newdlfiles $deplib"
- fi
- fi
- continue
- ;;
- %DEPLIBS%)
- alldeplibs=yes
- continue
- ;;
- esac # case $deplib
- if test "$found" = yes || test -f "$lib"; then :
- else
- $echo "$modename: cannot find the library \`$lib'" 1>&2
- exit $EXIT_FAILURE
- fi
-
- # Check to see that this really is a libtool archive.
- if (${SED} -e '2q' $lib | grep "^# Generated by .*$PACKAGE") >/dev/null 2>&1; then :
- else
- $echo "$modename: \`$lib' is not a valid libtool archive" 1>&2
- exit $EXIT_FAILURE
- fi
-
- ladir=`$echo "X$lib" | $Xsed -e 's%/[^/]*$%%'`
- test "X$ladir" = "X$lib" && ladir="."
-
- dlname=
- dlopen=
- dlpreopen=
- libdir=
- library_names=
- old_library=
- # If the library was installed with an old release of libtool,
- # it will not redefine variables installed, or shouldnotlink
- installed=yes
- shouldnotlink=no
- avoidtemprpath=
-
-
- # Read the .la file
- case $lib in
- */* | *\\*) . $lib ;;
- *) . ./$lib ;;
- esac
-
- if test "$linkmode,$pass" = "lib,link" ||
- test "$linkmode,$pass" = "prog,scan" ||
- { test "$linkmode" != prog && test "$linkmode" != lib; }; then
- test -n "$dlopen" && dlfiles="$dlfiles $dlopen"
- test -n "$dlpreopen" && dlprefiles="$dlprefiles $dlpreopen"
- fi
-
- if test "$pass" = conv; then
- # Only check for convenience libraries
- deplibs="$lib $deplibs"
- if test -z "$libdir"; then
- if test -z "$old_library"; then
- $echo "$modename: cannot find name of link library for \`$lib'" 1>&2
- exit $EXIT_FAILURE
- fi
- # It is a libtool convenience library, so add in its objects.
- convenience="$convenience $ladir/$objdir/$old_library"
- old_convenience="$old_convenience $ladir/$objdir/$old_library"
- tmp_libs=
- for deplib in $dependency_libs; do
- deplibs="$deplib $deplibs"
- if test "X$duplicate_deps" = "Xyes" ; then
- case "$tmp_libs " in
- *" $deplib "*) specialdeplibs="$specialdeplibs $deplib" ;;
- esac
- fi
- tmp_libs="$tmp_libs $deplib"
- done
- elif test "$linkmode" != prog && test "$linkmode" != lib; then
- $echo "$modename: \`$lib' is not a convenience library" 1>&2
- exit $EXIT_FAILURE
- fi
- continue
- fi # $pass = conv
-
-
- # Get the name of the library we link against.
- linklib=
- for l in $old_library $library_names; do
- linklib="$l"
- done
- if test -z "$linklib"; then
- $echo "$modename: cannot find name of link library for \`$lib'" 1>&2
- exit $EXIT_FAILURE
- fi
-
- # This library was specified with -dlopen.
- if test "$pass" = dlopen; then
- if test -z "$libdir"; then
- $echo "$modename: cannot -dlopen a convenience library: \`$lib'" 1>&2
- exit $EXIT_FAILURE
- fi
- if test -z "$dlname" ||
- test "$dlopen_support" != yes ||
- test "$build_libtool_libs" = no; then
- # If there is no dlname, no dlopen support or we're linking
- # statically, we need to preload. We also need to preload any
- # dependent libraries so libltdl's deplib preloader doesn't
- # bomb out in the load deplibs phase.
- dlprefiles="$dlprefiles $lib $dependency_libs"
- else
- newdlfiles="$newdlfiles $lib"
- fi
- continue
- fi # $pass = dlopen
-
- # We need an absolute path.
- case $ladir in
- [\\/]* | [A-Za-z]:[\\/]*) abs_ladir="$ladir" ;;
- *)
- abs_ladir=`cd "$ladir" && pwd`
- if test -z "$abs_ladir"; then
- $echo "$modename: warning: cannot determine absolute directory name of \`$ladir'" 1>&2
- $echo "$modename: passing it literally to the linker, although it might fail" 1>&2
- abs_ladir="$ladir"
- fi
- ;;
- esac
- laname=`$echo "X$lib" | $Xsed -e 's%^.*/%%'`
-
- # Find the relevant object directory and library name.
- if test "X$installed" = Xyes; then
- if test ! -f "$libdir/$linklib" && test -f "$abs_ladir/$linklib"; then
- $echo "$modename: warning: library \`$lib' was moved." 1>&2
- dir="$ladir"
- absdir="$abs_ladir"
- libdir="$abs_ladir"
- else
- dir="$libdir"
- absdir="$libdir"
- fi
- test "X$hardcode_automatic" = Xyes && avoidtemprpath=yes
- else
- if test ! -f "$ladir/$objdir/$linklib" && test -f "$abs_ladir/$linklib"; then
- dir="$ladir"
- absdir="$abs_ladir"
- # Remove this search path later
- notinst_path="$notinst_path $abs_ladir"
- else
- dir="$ladir/$objdir"
- absdir="$abs_ladir/$objdir"
- # Remove this search path later
- notinst_path="$notinst_path $abs_ladir"
- fi
- fi # $installed = yes
- name=`$echo "X$laname" | $Xsed -e 's/\.la$//' -e 's/^lib//'`
-
- # This library was specified with -dlpreopen.
- if test "$pass" = dlpreopen; then
- if test -z "$libdir"; then
- $echo "$modename: cannot -dlpreopen a convenience library: \`$lib'" 1>&2
- exit $EXIT_FAILURE
- fi
- # Prefer using a static library (so that no silly _DYNAMIC symbols
- # are required to link).
- if test -n "$old_library"; then
- newdlprefiles="$newdlprefiles $dir/$old_library"
- # Otherwise, use the dlname, so that lt_dlopen finds it.
- elif test -n "$dlname"; then
- newdlprefiles="$newdlprefiles $dir/$dlname"
- else
- newdlprefiles="$newdlprefiles $dir/$linklib"
- fi
- fi # $pass = dlpreopen
-
- if test -z "$libdir"; then
- # Link the convenience library
- if test "$linkmode" = lib; then
- deplibs="$dir/$old_library $deplibs"
- elif test "$linkmode,$pass" = "prog,link"; then
- compile_deplibs="$dir/$old_library $compile_deplibs"
- finalize_deplibs="$dir/$old_library $finalize_deplibs"
- else
- deplibs="$lib $deplibs" # used for prog,scan pass
- fi
- continue
- fi
-
-
- if test "$linkmode" = prog && test "$pass" != link; then
- newlib_search_path="$newlib_search_path $ladir"
- deplibs="$lib $deplibs"
-
- linkalldeplibs=no
- if test "$link_all_deplibs" != no || test -z "$library_names" ||
- test "$build_libtool_libs" = no; then
- linkalldeplibs=yes
- fi
-
- tmp_libs=
- for deplib in $dependency_libs; do
- case $deplib in
- -L*) newlib_search_path="$newlib_search_path "`$echo "X$deplib" | $Xsed -e 's/^-L//'`;; ### testsuite: skip nested quoting test
- esac
- # Need to link against all dependency_libs?
- if test "$linkalldeplibs" = yes; then
- deplibs="$deplib $deplibs"
- else
- # Need to hardcode shared library paths
- # or/and link against static libraries
- newdependency_libs="$deplib $newdependency_libs"
- fi
- if test "X$duplicate_deps" = "Xyes" ; then
- case "$tmp_libs " in
- *" $deplib "*) specialdeplibs="$specialdeplibs $deplib" ;;
- esac
- fi
- tmp_libs="$tmp_libs $deplib"
- done # for deplib
- continue
- fi # $linkmode = prog...
-
- if test "$linkmode,$pass" = "prog,link"; then
- if test -n "$library_names" &&
- { test "$prefer_static_libs" = no || test -z "$old_library"; }; then
- # We need to hardcode the library path
- if test -n "$shlibpath_var" && test -z "$avoidtemprpath" ; then
- # Make sure the rpath contains only unique directories.
- case "$temp_rpath " in
- *" $dir "*) ;;
- *" $absdir "*) ;;
- *) temp_rpath="$temp_rpath $dir" ;;
- esac
- fi
-
- # Hardcode the library path.
- # Skip directories that are in the system default run-time
- # search path.
- case " $sys_lib_dlsearch_path " in
- *" $absdir "*) ;;
- *)
- case "$compile_rpath " in
- *" $absdir "*) ;;
- *) compile_rpath="$compile_rpath $absdir"
- esac
- ;;
- esac
- case " $sys_lib_dlsearch_path " in
- *" $libdir "*) ;;
- *)
- case "$finalize_rpath " in
- *" $libdir "*) ;;
- *) finalize_rpath="$finalize_rpath $libdir"
- esac
- ;;
- esac
- fi # $linkmode,$pass = prog,link...
-
- if test "$alldeplibs" = yes &&
- { test "$deplibs_check_method" = pass_all ||
- { test "$build_libtool_libs" = yes &&
- test -n "$library_names"; }; }; then
- # We only need to search for static libraries
- continue
- fi
- fi
-
- link_static=no # Whether the deplib will be linked statically
- if test -n "$library_names" &&
- { test "$prefer_static_libs" = no || test -z "$old_library"; }; then
- if test "$installed" = no; then
- notinst_deplibs="$notinst_deplibs $lib"
- need_relink=yes
- fi
- # This is a shared library
-
- # Warn about portability, can't link against -module's on
- # some systems (darwin)
- if test "$shouldnotlink" = yes && test "$pass" = link ; then
- $echo
- if test "$linkmode" = prog; then
- $echo "*** Warning: Linking the executable $output against the loadable module"
- else
- $echo "*** Warning: Linking the shared library $output against the loadable module"
- fi
- $echo "*** $linklib is not portable!"
- fi
- if test "$linkmode" = lib &&
- test "$hardcode_into_libs" = yes; then
- # Hardcode the library path.
- # Skip directories that are in the system default run-time
- # search path.
- case " $sys_lib_dlsearch_path " in
- *" $absdir "*) ;;
- *)
- case "$compile_rpath " in
- *" $absdir "*) ;;
- *) compile_rpath="$compile_rpath $absdir"
- esac
- ;;
- esac
- case " $sys_lib_dlsearch_path " in
- *" $libdir "*) ;;
- *)
- case "$finalize_rpath " in
- *" $libdir "*) ;;
- *) finalize_rpath="$finalize_rpath $libdir"
- esac
- ;;
- esac
- fi
-
- if test -n "$old_archive_from_expsyms_cmds"; then
- # figure out the soname
- set dummy $library_names
- realname="$2"
- shift; shift
- libname=`eval \\$echo \"$libname_spec\"`
- # use dlname if we got it. it's perfectly good, no?
- if test -n "$dlname"; then
- soname="$dlname"
- elif test -n "$soname_spec"; then
- # bleh windows
- case $host in
- *cygwin* | mingw*)
- major=`expr $current - $age`
- versuffix="-$major"
- ;;
- esac
- eval soname=\"$soname_spec\"
- else
- soname="$realname"
- fi
-
- # Make a new name for the extract_expsyms_cmds to use
- soroot="$soname"
- soname=`$echo $soroot | ${SED} -e 's/^.*\///'`
- newlib="libimp-`$echo $soname | ${SED} 's/^lib//;s/\.dll$//'`.a"
-
- # If the library has no export list, then create one now
- if test -f "$output_objdir/$soname-def"; then :
- else
- $show "extracting exported symbol list from \`$soname'"
- save_ifs="$IFS"; IFS='~'
- cmds=$extract_expsyms_cmds
- for cmd in $cmds; do
- IFS="$save_ifs"
- eval cmd=\"$cmd\"
- $show "$cmd"
- $run eval "$cmd" || exit $?
- done
- IFS="$save_ifs"
- fi
-
- # Create $newlib
- if test -f "$output_objdir/$newlib"; then :; else
- $show "generating import library for \`$soname'"
- save_ifs="$IFS"; IFS='~'
- cmds=$old_archive_from_expsyms_cmds
- for cmd in $cmds; do
- IFS="$save_ifs"
- eval cmd=\"$cmd\"
- $show "$cmd"
- $run eval "$cmd" || exit $?
- done
- IFS="$save_ifs"
- fi
- # make sure the library variables are pointing to the new library
- dir=$output_objdir
- linklib=$newlib
- fi # test -n "$old_archive_from_expsyms_cmds"
-
- if test "$linkmode" = prog || test "$mode" != relink; then
- add_shlibpath=
- add_dir=
- add=
- lib_linked=yes
- case $hardcode_action in
- immediate | unsupported)
- if test "$hardcode_direct" = no; then
- add="$dir/$linklib"
- case $host in
- *-*-sco3.2v5* ) add_dir="-L$dir" ;;
- *-*-darwin* )
- # if the lib is a module then we can not link against
- # it, someone is ignoring the new warnings I added
- if /usr/bin/file -L $add 2> /dev/null | $EGREP "bundle" >/dev/null ; then
- $echo "** Warning, lib $linklib is a module, not a shared library"
- if test -z "$old_library" ; then
- $echo
- $echo "** And there doesn't seem to be a static archive available"
- $echo "** The link will probably fail, sorry"
- else
- add="$dir/$old_library"
- fi
- fi
- esac
- elif test "$hardcode_minus_L" = no; then
- case $host in
- *-*-sunos*) add_shlibpath="$dir" ;;
- esac
- add_dir="-L$dir"
- add="-l$name"
- elif test "$hardcode_shlibpath_var" = no; then
- add_shlibpath="$dir"
- add="-l$name"
- else
- lib_linked=no
- fi
- ;;
- relink)
- if test "$hardcode_direct" = yes; then
- add="$dir/$linklib"
- elif test "$hardcode_minus_L" = yes; then
- add_dir="-L$dir"
- # Try looking first in the location we're being installed to.
- if test -n "$inst_prefix_dir"; then
- case "$libdir" in
- [\\/]*)
- add_dir="$add_dir -L$inst_prefix_dir$libdir"
- ;;
- esac
- fi
- add="-l$name"
- elif test "$hardcode_shlibpath_var" = yes; then
- add_shlibpath="$dir"
- add="-l$name"
- else
- lib_linked=no
- fi
- ;;
- *) lib_linked=no ;;
- esac
-
- if test "$lib_linked" != yes; then
- $echo "$modename: configuration error: unsupported hardcode properties"
- exit $EXIT_FAILURE
- fi
-
- if test -n "$add_shlibpath"; then
- case :$compile_shlibpath: in
- *":$add_shlibpath:"*) ;;
- *) compile_shlibpath="$compile_shlibpath$add_shlibpath:" ;;
- esac
- fi
- if test "$linkmode" = prog; then
- test -n "$add_dir" && compile_deplibs="$add_dir $compile_deplibs"
- test -n "$add" && compile_deplibs="$add $compile_deplibs"
- else
- test -n "$add_dir" && deplibs="$add_dir $deplibs"
- test -n "$add" && deplibs="$add $deplibs"
- if test "$hardcode_direct" != yes && \
- test "$hardcode_minus_L" != yes && \
- test "$hardcode_shlibpath_var" = yes; then
- case :$finalize_shlibpath: in
- *":$libdir:"*) ;;
- *) finalize_shlibpath="$finalize_shlibpath$libdir:" ;;
- esac
- fi
- fi
- fi
-
- if test "$linkmode" = prog || test "$mode" = relink; then
- add_shlibpath=
- add_dir=
- add=
- # Finalize command for both is simple: just hardcode it.
- if test "$hardcode_direct" = yes; then
- add="$libdir/$linklib"
- elif test "$hardcode_minus_L" = yes; then
- add_dir="-L$libdir"
- add="-l$name"
- elif test "$hardcode_shlibpath_var" = yes; then
- case :$finalize_shlibpath: in
- *":$libdir:"*) ;;
- *) finalize_shlibpath="$finalize_shlibpath$libdir:" ;;
- esac
- add="-l$name"
- elif test "$hardcode_automatic" = yes; then
- if test -n "$inst_prefix_dir" &&
- test -f "$inst_prefix_dir$libdir/$linklib" ; then
- add="$inst_prefix_dir$libdir/$linklib"
- else
- add="$libdir/$linklib"
- fi
- else
- # We cannot seem to hardcode it, guess we'll fake it.
- add_dir="-L$libdir"
- # Try looking first in the location we're being installed to.
- if test -n "$inst_prefix_dir"; then
- case "$libdir" in
- [\\/]*)
- add_dir="$add_dir -L$inst_prefix_dir$libdir"
- ;;
- esac
- fi
- add="-l$name"
- fi
-
- if test "$linkmode" = prog; then
- test -n "$add_dir" && finalize_deplibs="$add_dir $finalize_deplibs"
- test -n "$add" && finalize_deplibs="$add $finalize_deplibs"
- else
- test -n "$add_dir" && deplibs="$add_dir $deplibs"
- test -n "$add" && deplibs="$add $deplibs"
- fi
- fi
- elif test "$linkmode" = prog; then
- # Here we assume that one of hardcode_direct or hardcode_minus_L
- # is not unsupported. This is valid on all known static and
- # shared platforms.
- if test "$hardcode_direct" != unsupported; then
- test -n "$old_library" && linklib="$old_library"
- compile_deplibs="$dir/$linklib $compile_deplibs"
- finalize_deplibs="$dir/$linklib $finalize_deplibs"
- else
- compile_deplibs="-l$name -L$dir $compile_deplibs"
- finalize_deplibs="-l$name -L$dir $finalize_deplibs"
- fi
- elif test "$build_libtool_libs" = yes; then
- # Not a shared library
- if test "$deplibs_check_method" != pass_all; then
- # We're trying link a shared library against a static one
- # but the system doesn't support it.
-
- # Just print a warning and add the library to dependency_libs so
- # that the program can be linked against the static library.
- $echo
- $echo "*** Warning: This system can not link to static lib archive $lib."
- $echo "*** I have the capability to make that library automatically link in when"
- $echo "*** you link to this library. But I can only do this if you have a"
- $echo "*** shared version of the library, which you do not appear to have."
- if test "$module" = yes; then
- $echo "*** But as you try to build a module library, libtool will still create "
- $echo "*** a static module, that should work as long as the dlopening application"
- $echo "*** is linked with the -dlopen flag to resolve symbols at runtime."
- if test -z "$global_symbol_pipe"; then
- $echo
- $echo "*** However, this would only work if libtool was able to extract symbol"
- $echo "*** lists from a program, using \`nm' or equivalent, but libtool could"
- $echo "*** not find such a program. So, this module is probably useless."
- $echo "*** \`nm' from GNU binutils and a full rebuild may help."
- fi
- if test "$build_old_libs" = no; then
- build_libtool_libs=module
- build_old_libs=yes
- else
- build_libtool_libs=no
- fi
- fi
- else
- convenience="$convenience $dir/$old_library"
- old_convenience="$old_convenience $dir/$old_library"
- deplibs="$dir/$old_library $deplibs"
- link_static=yes
- fi
- fi # link shared/static library?
-
- if test "$linkmode" = lib; then
- if test -n "$dependency_libs" &&
- { test "$hardcode_into_libs" != yes ||
- test "$build_old_libs" = yes ||
- test "$link_static" = yes; }; then
- # Extract -R from dependency_libs
- temp_deplibs=
- for libdir in $dependency_libs; do
- case $libdir in
- -R*) temp_xrpath=`$echo "X$libdir" | $Xsed -e 's/^-R//'`
- case " $xrpath " in
- *" $temp_xrpath "*) ;;
- *) xrpath="$xrpath $temp_xrpath";;
- esac;;
- *) temp_deplibs="$temp_deplibs $libdir";;
- esac
- done
- dependency_libs="$temp_deplibs"
- fi
-
- newlib_search_path="$newlib_search_path $absdir"
- # Link against this library
- test "$link_static" = no && newdependency_libs="$abs_ladir/$laname $newdependency_libs"
- # ... and its dependency_libs
- tmp_libs=
- for deplib in $dependency_libs; do
- newdependency_libs="$deplib $newdependency_libs"
- if test "X$duplicate_deps" = "Xyes" ; then
- case "$tmp_libs " in
- *" $deplib "*) specialdeplibs="$specialdeplibs $deplib" ;;
- esac
- fi
- tmp_libs="$tmp_libs $deplib"
- done
-
- if test "$link_all_deplibs" != no; then
- # Add the search paths of all dependency libraries
- for deplib in $dependency_libs; do
- case $deplib in
- -L*) path="$deplib" ;;
- *.la)
- dir=`$echo "X$deplib" | $Xsed -e 's%/[^/]*$%%'`
- test "X$dir" = "X$deplib" && dir="."
- # We need an absolute path.
- case $dir in
- [\\/]* | [A-Za-z]:[\\/]*) absdir="$dir" ;;
- *)
- absdir=`cd "$dir" && pwd`
- if test -z "$absdir"; then
- $echo "$modename: warning: cannot determine absolute directory name of \`$dir'" 1>&2
- absdir="$dir"
- fi
- ;;
- esac
- if grep "^installed=no" $deplib > /dev/null; then
- path="$absdir/$objdir"
- else
- eval libdir=`${SED} -n -e 's/^libdir=\(.*\)$/\1/p' $deplib`
- if test -z "$libdir"; then
- $echo "$modename: \`$deplib' is not a valid libtool archive" 1>&2
- exit $EXIT_FAILURE
- fi
- if test "$absdir" != "$libdir"; then
- $echo "$modename: warning: \`$deplib' seems to be moved" 1>&2
- fi
- path="$absdir"
- fi
- depdepl=
- case $host in
- *-*-darwin*)
- # we do not want to link against static libs,
- # but need to link against shared
- eval deplibrary_names=`${SED} -n -e 's/^library_names=\(.*\)$/\1/p' $deplib`
- if test -n "$deplibrary_names" ; then
- for tmp in $deplibrary_names ; do
- depdepl=$tmp
- done
- if test -f "$path/$depdepl" ; then
- depdepl="$path/$depdepl"
- fi
- # do not add paths which are already there
- case " $newlib_search_path " in
- *" $path "*) ;;
- *) newlib_search_path="$newlib_search_path $path";;
- esac
- fi
- path=""
- ;;
- *)
- path="-L$path"
- ;;
- esac
- ;;
- -l*)
- case $host in
- *-*-darwin*)
- # Again, we only want to link against shared libraries
- eval tmp_libs=`$echo "X$deplib" | $Xsed -e "s,^\-l,,"`
- for tmp in $newlib_search_path ; do
- if test -f "$tmp/lib$tmp_libs.dylib" ; then
- eval depdepl="$tmp/lib$tmp_libs.dylib"
- break
- fi
- done
- path=""
- ;;
- *) continue ;;
- esac
- ;;
- *) continue ;;
- esac
- case " $deplibs " in
- *" $path "*) ;;
- *) deplibs="$path $deplibs" ;;
- esac
- case " $deplibs " in
- *" $depdepl "*) ;;
- *) deplibs="$depdepl $deplibs" ;;
- esac
- done
- fi # link_all_deplibs != no
- fi # linkmode = lib
- done # for deplib in $libs
- dependency_libs="$newdependency_libs"
- if test "$pass" = dlpreopen; then
- # Link the dlpreopened libraries before other libraries
- for deplib in $save_deplibs; do
- deplibs="$deplib $deplibs"
- done
- fi
- if test "$pass" != dlopen; then
- if test "$pass" != conv; then
- # Make sure lib_search_path contains only unique directories.
- lib_search_path=
- for dir in $newlib_search_path; do
- case "$lib_search_path " in
- *" $dir "*) ;;
- *) lib_search_path="$lib_search_path $dir" ;;
- esac
- done
- newlib_search_path=
- fi
-
- if test "$linkmode,$pass" != "prog,link"; then
- vars="deplibs"
- else
- vars="compile_deplibs finalize_deplibs"
- fi
- for var in $vars dependency_libs; do
- # Add libraries to $var in reverse order
- eval tmp_libs=\"\$$var\"
- new_libs=
- for deplib in $tmp_libs; do
- # FIXME: Pedantically, this is the right thing to do, so
- # that some nasty dependency loop isn't accidentally
- # broken:
- #new_libs="$deplib $new_libs"
- # Pragmatically, this seems to cause very few problems in
- # practice:
- case $deplib in
- -L*) new_libs="$deplib $new_libs" ;;
- -R*) ;;
- *)
- # And here is the reason: when a library appears more
- # than once as an explicit dependence of a library, or
- # is implicitly linked in more than once by the
- # compiler, it is considered special, and multiple
- # occurrences thereof are not removed. Compare this
- # with having the same library being listed as a
- # dependency of multiple other libraries: in this case,
- # we know (pedantically, we assume) the library does not
- # need to be listed more than once, so we keep only the
- # last copy. This is not always right, but it is rare
- # enough that we require users that really mean to play
- # such unportable linking tricks to link the library
- # using -Wl,-lname, so that libtool does not consider it
- # for duplicate removal.
- case " $specialdeplibs " in
- *" $deplib "*) new_libs="$deplib $new_libs" ;;
- *)
- case " $new_libs " in
- *" $deplib "*) ;;
- *) new_libs="$deplib $new_libs" ;;
- esac
- ;;
- esac
- ;;
- esac
- done
- tmp_libs=
- for deplib in $new_libs; do
- case $deplib in
- -L*)
- case " $tmp_libs " in
- *" $deplib "*) ;;
- *) tmp_libs="$tmp_libs $deplib" ;;
- esac
- ;;
- *) tmp_libs="$tmp_libs $deplib" ;;
- esac
- done
- eval $var=\"$tmp_libs\"
- done # for var
- fi
- # Last step: remove runtime libs from dependency_libs
- # (they stay in deplibs)
- tmp_libs=
- for i in $dependency_libs ; do
- case " $predeps $postdeps $compiler_lib_search_path " in
- *" $i "*)
- i=""
- ;;
- esac
- if test -n "$i" ; then
- tmp_libs="$tmp_libs $i"
- fi
- done
- dependency_libs=$tmp_libs
- done # for pass
- if test "$linkmode" = prog; then
- dlfiles="$newdlfiles"
- dlprefiles="$newdlprefiles"
- fi
-
- case $linkmode in
- oldlib)
- if test -n "$deplibs"; then
- $echo "$modename: warning: \`-l' and \`-L' are ignored for archives" 1>&2
- fi
-
- if test -n "$dlfiles$dlprefiles" || test "$dlself" != no; then
- $echo "$modename: warning: \`-dlopen' is ignored for archives" 1>&2
- fi
-
- if test -n "$rpath"; then
- $echo "$modename: warning: \`-rpath' is ignored for archives" 1>&2
- fi
-
- if test -n "$xrpath"; then
- $echo "$modename: warning: \`-R' is ignored for archives" 1>&2
- fi
-
- if test -n "$vinfo"; then
- $echo "$modename: warning: \`-version-info/-version-number' is ignored for archives" 1>&2
- fi
-
- if test -n "$release"; then
- $echo "$modename: warning: \`-release' is ignored for archives" 1>&2
- fi
-
- if test -n "$export_symbols" || test -n "$export_symbols_regex"; then
- $echo "$modename: warning: \`-export-symbols' is ignored for archives" 1>&2
- fi
-
- # Now set the variables for building old libraries.
- build_libtool_libs=no
- oldlibs="$output"
- objs="$objs$old_deplibs"
- ;;
-
- lib)
- # Make sure we only generate libraries of the form `libNAME.la'.
- case $outputname in
- lib*)
- name=`$echo "X$outputname" | $Xsed -e 's/\.la$//' -e 's/^lib//'`
- eval shared_ext=\"$shrext_cmds\"
- eval libname=\"$libname_spec\"
- ;;
- *)
- if test "$module" = no; then
- $echo "$modename: libtool library \`$output' must begin with \`lib'" 1>&2
- $echo "$help" 1>&2
- exit $EXIT_FAILURE
- fi
- if test "$need_lib_prefix" != no; then
- # Add the "lib" prefix for modules if required
- name=`$echo "X$outputname" | $Xsed -e 's/\.la$//'`
- eval shared_ext=\"$shrext_cmds\"
- eval libname=\"$libname_spec\"
- else
- libname=`$echo "X$outputname" | $Xsed -e 's/\.la$//'`
- fi
- ;;
- esac
-
- if test -n "$objs"; then
- if test "$deplibs_check_method" != pass_all; then
- $echo "$modename: cannot build libtool library \`$output' from non-libtool objects on this host:$objs" 2>&1
- exit $EXIT_FAILURE
- else
- $echo
- $echo "*** Warning: Linking the shared library $output against the non-libtool"
- $echo "*** objects $objs is not portable!"
- libobjs="$libobjs $objs"
- fi
- fi
-
- if test "$dlself" != no; then
- $echo "$modename: warning: \`-dlopen self' is ignored for libtool libraries" 1>&2
- fi
-
- set dummy $rpath
- if test "$#" -gt 2; then
- $echo "$modename: warning: ignoring multiple \`-rpath's for a libtool library" 1>&2
- fi
- install_libdir="$2"
-
- oldlibs=
- if test -z "$rpath"; then
- if test "$build_libtool_libs" = yes; then
- # Building a libtool convenience library.
- # Some compilers have problems with a `.al' extension so
- # convenience libraries should have the same extension an
- # archive normally would.
- oldlibs="$output_objdir/$libname.$libext $oldlibs"
- build_libtool_libs=convenience
- build_old_libs=yes
- fi
-
- if test -n "$vinfo"; then
- $echo "$modename: warning: \`-version-info/-version-number' is ignored for convenience libraries" 1>&2
- fi
-
- if test -n "$release"; then
- $echo "$modename: warning: \`-release' is ignored for convenience libraries" 1>&2
- fi
- else
-
- # Parse the version information argument.
- save_ifs="$IFS"; IFS=':'
- set dummy $vinfo 0 0 0
- IFS="$save_ifs"
-
- if test -n "$8"; then
- $echo "$modename: too many parameters to \`-version-info'" 1>&2
- $echo "$help" 1>&2
- exit $EXIT_FAILURE
- fi
-
- # convert absolute version numbers to libtool ages
- # this retains compatibility with .la files and attempts
- # to make the code below a bit more comprehensible
-
- case $vinfo_number in
- yes)
- number_major="$2"
- number_minor="$3"
- number_revision="$4"
- #
- # There are really only two kinds -- those that
- # use the current revision as the major version
- # and those that subtract age and use age as
- # a minor version. But, then there is irix
- # which has an extra 1 added just for fun
- #
- case $version_type in
- darwin|linux|osf|windows)
- current=`expr $number_major + $number_minor`
- age="$number_minor"
- revision="$number_revision"
- ;;
- freebsd-aout|freebsd-elf|sunos)
- current="$number_major"
- revision="$number_minor"
- age="0"
- ;;
- irix|nonstopux)
- current=`expr $number_major + $number_minor - 1`
- age="$number_minor"
- revision="$number_minor"
- ;;
- esac
- ;;
- no)
- current="$2"
- revision="$3"
- age="$4"
- ;;
- esac
-
- # Check that each of the things are valid numbers.
- case $current in
- 0|[1-9]|[1-9][0-9]|[1-9][0-9][0-9]|[1-9][0-9][0-9][0-9]|[1-9][0-9][0-9][0-9][0-9]) ;;
- *)
- $echo "$modename: CURRENT \`$current' must be a nonnegative integer" 1>&2
- $echo "$modename: \`$vinfo' is not valid version information" 1>&2
- exit $EXIT_FAILURE
- ;;
- esac
-
- case $revision in
- 0|[1-9]|[1-9][0-9]|[1-9][0-9][0-9]|[1-9][0-9][0-9][0-9]|[1-9][0-9][0-9][0-9][0-9]) ;;
- *)
- $echo "$modename: REVISION \`$revision' must be a nonnegative integer" 1>&2
- $echo "$modename: \`$vinfo' is not valid version information" 1>&2
- exit $EXIT_FAILURE
- ;;
- esac
-
- case $age in
- 0|[1-9]|[1-9][0-9]|[1-9][0-9][0-9]|[1-9][0-9][0-9][0-9]|[1-9][0-9][0-9][0-9][0-9]) ;;
- *)
- $echo "$modename: AGE \`$age' must be a nonnegative integer" 1>&2
- $echo "$modename: \`$vinfo' is not valid version information" 1>&2
- exit $EXIT_FAILURE
- ;;
- esac
-
- if test "$age" -gt "$current"; then
- $echo "$modename: AGE \`$age' is greater than the current interface number \`$current'" 1>&2
- $echo "$modename: \`$vinfo' is not valid version information" 1>&2
- exit $EXIT_FAILURE
- fi
-
- # Calculate the version variables.
- major=
- versuffix=
- verstring=
- case $version_type in
- none) ;;
-
- darwin)
- # Like Linux, but with the current version available in
- # verstring for coding it into the library header
- major=.`expr $current - $age`
- versuffix="$major.$age.$revision"
- # Darwin ld doesn't like 0 for these options...
- minor_current=`expr $current + 1`
- verstring="${wl}-compatibility_version ${wl}$minor_current ${wl}-current_version ${wl}$minor_current.$revision"
- ;;
-
- freebsd-aout)
- major=".$current"
- versuffix=".$current.$revision";
- ;;
-
- freebsd-elf)
- major=".$current"
- versuffix=".$current";
- ;;
-
- irix | nonstopux)
- major=`expr $current - $age + 1`
-
- case $version_type in
- nonstopux) verstring_prefix=nonstopux ;;
- *) verstring_prefix=sgi ;;
- esac
- verstring="$verstring_prefix$major.$revision"
-
- # Add in all the interfaces that we are compatible with.
- loop=$revision
- while test "$loop" -ne 0; do
- iface=`expr $revision - $loop`
- loop=`expr $loop - 1`
- verstring="$verstring_prefix$major.$iface:$verstring"
- done
-
- # Before this point, $major must not contain `.'.
- major=.$major
- versuffix="$major.$revision"
- ;;
-
- linux)
- major=.`expr $current - $age`
- versuffix="$major.$age.$revision"
- ;;
-
- osf)
- major=.`expr $current - $age`
- versuffix=".$current.$age.$revision"
- verstring="$current.$age.$revision"
-
- # Add in all the interfaces that we are compatible with.
- loop=$age
- while test "$loop" -ne 0; do
- iface=`expr $current - $loop`
- loop=`expr $loop - 1`
- verstring="$verstring:${iface}.0"
- done
-
- # Make executables depend on our current version.
- verstring="$verstring:${current}.0"
- ;;
-
- sunos)
- major=".$current"
- versuffix=".$current.$revision"
- ;;
-
- windows)
- # Use '-' rather than '.', since we only want one
- # extension on DOS 8.3 filesystems.
- major=`expr $current - $age`
- versuffix="-$major"
- ;;
-
- *)
- $echo "$modename: unknown library version type \`$version_type'" 1>&2
- $echo "Fatal configuration error. See the $PACKAGE docs for more information." 1>&2
- exit $EXIT_FAILURE
- ;;
- esac
-
- # Clear the version info if we defaulted, and they specified a release.
- if test -z "$vinfo" && test -n "$release"; then
- major=
- case $version_type in
- darwin)
- # we can't check for "0.0" in archive_cmds due to quoting
- # problems, so we reset it completely
- verstring=
- ;;
- *)
- verstring="0.0"
- ;;
- esac
- if test "$need_version" = no; then
- versuffix=
- else
- versuffix=".0.0"
- fi
- fi
-
- # Remove version info from name if versioning should be avoided
- if test "$avoid_version" = yes && test "$need_version" = no; then
- major=
- versuffix=
- verstring=""
- fi
-
- # Check to see if the archive will have undefined symbols.
- if test "$allow_undefined" = yes; then
- if test "$allow_undefined_flag" = unsupported; then
- $echo "$modename: warning: undefined symbols not allowed in $host shared libraries" 1>&2
- build_libtool_libs=no
- build_old_libs=yes
- fi
- else
- # Don't allow undefined symbols.
- allow_undefined_flag="$no_undefined_flag"
- fi
- fi
-
- if test "$mode" != relink; then
- # Remove our outputs, but don't remove object files since they
- # may have been created when compiling PIC objects.
- removelist=
- tempremovelist=`$echo "$output_objdir/*"`
- for p in $tempremovelist; do
- case $p in
- *.$objext)
- ;;
- $output_objdir/$outputname | $output_objdir/$libname.* | $output_objdir/${libname}${release}.*)
- if test "X$precious_files_regex" != "X"; then
- if echo $p | $EGREP -e "$precious_files_regex" >/dev/null 2>&1
- then
- continue
- fi
- fi
- removelist="$removelist $p"
- ;;
- *) ;;
- esac
- done
- if test -n "$removelist"; then
- $show "${rm}r $removelist"
- $run ${rm}r $removelist
- fi
- fi
-
- # Now set the variables for building old libraries.
- if test "$build_old_libs" = yes && test "$build_libtool_libs" != convenience ; then
- oldlibs="$oldlibs $output_objdir/$libname.$libext"
-
- # Transform .lo files to .o files.
- oldobjs="$objs "`$echo "X$libobjs" | $SP2NL | $Xsed -e '/\.'${libext}'$/d' -e "$lo2o" | $NL2SP`
- fi
-
- # Eliminate all temporary directories.
- for path in $notinst_path; do
- lib_search_path=`$echo "$lib_search_path " | ${SED} -e 's% $path % %g'`
- deplibs=`$echo "$deplibs " | ${SED} -e 's% -L$path % %g'`
- dependency_libs=`$echo "$dependency_libs " | ${SED} -e 's% -L$path % %g'`
- done
-
- if test -n "$xrpath"; then
- # If the user specified any rpath flags, then add them.
- temp_xrpath=
- for libdir in $xrpath; do
- temp_xrpath="$temp_xrpath -R$libdir"
- case "$finalize_rpath " in
- *" $libdir "*) ;;
- *) finalize_rpath="$finalize_rpath $libdir" ;;
- esac
- done
- if test "$hardcode_into_libs" != yes || test "$build_old_libs" = yes; then
- dependency_libs="$temp_xrpath $dependency_libs"
- fi
- fi
-
- # Make sure dlfiles contains only unique files that won't be dlpreopened
- old_dlfiles="$dlfiles"
- dlfiles=
- for lib in $old_dlfiles; do
- case " $dlprefiles $dlfiles " in
- *" $lib "*) ;;
- *) dlfiles="$dlfiles $lib" ;;
- esac
- done
-
- # Make sure dlprefiles contains only unique files
- old_dlprefiles="$dlprefiles"
- dlprefiles=
- for lib in $old_dlprefiles; do
- case "$dlprefiles " in
- *" $lib "*) ;;
- *) dlprefiles="$dlprefiles $lib" ;;
- esac
- done
-
- if test "$build_libtool_libs" = yes; then
- if test -n "$rpath"; then
- case $host in
- *-*-cygwin* | *-*-mingw* | *-*-pw32* | *-*-os2* | *-*-beos*)
- # these systems don't actually have a c library (as such)!
- ;;
- *-*-rhapsody* | *-*-darwin1.[012])
- # Rhapsody C library is in the System framework
- deplibs="$deplibs -framework System"
- ;;
- *-*-netbsd*)
- # Don't link with libc until the a.out ld.so is fixed.
- ;;
- *-*-openbsd* | *-*-freebsd* | *-*-dragonfly*)
- # Do not include libc due to us having libc/libc_r.
- test "X$arg" = "X-lc" && continue
- ;;
- *)
- # Add libc to deplibs on all other systems if necessary.
- if test "$build_libtool_need_lc" = "yes"; then
- deplibs="$deplibs -lc"
- fi
- ;;
- esac
- fi
-
- # Transform deplibs into only deplibs that can be linked in shared.
- name_save=$name
- libname_save=$libname
- release_save=$release
- versuffix_save=$versuffix
- major_save=$major
- # I'm not sure if I'm treating the release correctly. I think
- # release should show up in the -l (ie -lgmp5) so we don't want to
- # add it in twice. Is that correct?
- release=""
- versuffix=""
- major=""
- newdeplibs=
- droppeddeps=no
- case $deplibs_check_method in
- pass_all)
- # Don't check for shared/static. Everything works.
- # This might be a little naive. We might want to check
- # whether the library exists or not. But this is on
- # osf3 & osf4 and I'm not really sure... Just
- # implementing what was already the behavior.
- newdeplibs=$deplibs
- ;;
- test_compile)
- # This code stresses the "libraries are programs" paradigm to its
- # limits. Maybe even breaks it. We compile a program, linking it
- # against the deplibs as a proxy for the library. Then we can check
- # whether they linked in statically or dynamically with ldd.
- $rm conftest.c
- cat > conftest.c <<EOF
- int main() { return 0; }
-EOF
- $rm conftest
- $LTCC -o conftest conftest.c $deplibs
- if test "$?" -eq 0 ; then
- ldd_output=`ldd conftest`
- for i in $deplibs; do
- name="`expr $i : '-l\(.*\)'`"
- # If $name is empty we are operating on a -L argument.
- if test "$name" != "" && test "$name" -ne "0"; then
- if test "X$allow_libtool_libs_with_static_runtimes" = "Xyes" ; then
- case " $predeps $postdeps " in
- *" $i "*)
- newdeplibs="$newdeplibs $i"
- i=""
- ;;
- esac
- fi
- if test -n "$i" ; then
- libname=`eval \\$echo \"$libname_spec\"`
- deplib_matches=`eval \\$echo \"$library_names_spec\"`
- set dummy $deplib_matches
- deplib_match=$2
- if test `expr "$ldd_output" : ".*$deplib_match"` -ne 0 ; then
- newdeplibs="$newdeplibs $i"
- else
- droppeddeps=yes
- $echo
- $echo "*** Warning: dynamic linker does not accept needed library $i."
- $echo "*** I have the capability to make that library automatically link in when"
- $echo "*** you link to this library. But I can only do this if you have a"
- $echo "*** shared version of the library, which I believe you do not have"
- $echo "*** because a test_compile did reveal that the linker did not use it for"
- $echo "*** its dynamic dependency list that programs get resolved with at runtime."
- fi
- fi
- else
- newdeplibs="$newdeplibs $i"
- fi
- done
- else
- # Error occurred in the first compile. Let's try to salvage
- # the situation: Compile a separate program for each library.
- for i in $deplibs; do
- name="`expr $i : '-l\(.*\)'`"
- # If $name is empty we are operating on a -L argument.
- if test "$name" != "" && test "$name" != "0"; then
- $rm conftest
- $LTCC -o conftest conftest.c $i
- # Did it work?
- if test "$?" -eq 0 ; then
- ldd_output=`ldd conftest`
- if test "X$allow_libtool_libs_with_static_runtimes" = "Xyes" ; then
- case " $predeps $postdeps " in
- *" $i "*)
- newdeplibs="$newdeplibs $i"
- i=""
- ;;
- esac
- fi
- if test -n "$i" ; then
- libname=`eval \\$echo \"$libname_spec\"`
- deplib_matches=`eval \\$echo \"$library_names_spec\"`
- set dummy $deplib_matches
- deplib_match=$2
- if test `expr "$ldd_output" : ".*$deplib_match"` -ne 0 ; then
- newdeplibs="$newdeplibs $i"
- else
- droppeddeps=yes
- $echo
- $echo "*** Warning: dynamic linker does not accept needed library $i."
- $echo "*** I have the capability to make that library automatically link in when"
- $echo "*** you link to this library. But I can only do this if you have a"
- $echo "*** shared version of the library, which you do not appear to have"
- $echo "*** because a test_compile did reveal that the linker did not use this one"
- $echo "*** as a dynamic dependency that programs can get resolved with at runtime."
- fi
- fi
- else
- droppeddeps=yes
- $echo
- $echo "*** Warning! Library $i is needed by this library but I was not able to"
- $echo "*** make it link in! You will probably need to install it or some"
- $echo "*** library that it depends on before this library will be fully"
- $echo "*** functional. Installing it before continuing would be even better."
- fi
- else
- newdeplibs="$newdeplibs $i"
- fi
- done
- fi
- ;;
- file_magic*)
- set dummy $deplibs_check_method
- file_magic_regex=`expr "$deplibs_check_method" : "$2 \(.*\)"`
- for a_deplib in $deplibs; do
- name="`expr $a_deplib : '-l\(.*\)'`"
- # If $name is empty we are operating on a -L argument.
- if test "$name" != "" && test "$name" != "0"; then
- if test "X$allow_libtool_libs_with_static_runtimes" = "Xyes" ; then
- case " $predeps $postdeps " in
- *" $a_deplib "*)
- newdeplibs="$newdeplibs $a_deplib"
- a_deplib=""
- ;;
- esac
- fi
- if test -n "$a_deplib" ; then
- libname=`eval \\$echo \"$libname_spec\"`
- for i in $lib_search_path $sys_lib_search_path $shlib_search_path; do
- potential_libs=`ls $i/$libname[.-]* 2>/dev/null`
- for potent_lib in $potential_libs; do
- # Follow soft links.
- if ls -lLd "$potent_lib" 2>/dev/null \
- | grep " -> " >/dev/null; then
- continue
- fi
- # The statement above tries to avoid entering an
- # endless loop below, in case of cyclic links.
- # We might still enter an endless loop, since a link
- # loop can be closed while we follow links,
- # but so what?
- potlib="$potent_lib"
- while test -h "$potlib" 2>/dev/null; do
- potliblink=`ls -ld $potlib | ${SED} 's/.* -> //'`
- case $potliblink in
- [\\/]* | [A-Za-z]:[\\/]*) potlib="$potliblink";;
- *) potlib=`$echo "X$potlib" | $Xsed -e 's,[^/]*$,,'`"$potliblink";;
- esac
- done
- if eval $file_magic_cmd \"\$potlib\" 2>/dev/null \
- | ${SED} 10q \
- | $EGREP "$file_magic_regex" > /dev/null; then
- newdeplibs="$newdeplibs $a_deplib"
- a_deplib=""
- break 2
- fi
- done
- done
- fi
- if test -n "$a_deplib" ; then
- droppeddeps=yes
- $echo
- $echo "*** Warning: linker path does not have real file for library $a_deplib."
- $echo "*** I have the capability to make that library automatically link in when"
- $echo "*** you link to this library. But I can only do this if you have a"
- $echo "*** shared version of the library, which you do not appear to have"
- $echo "*** because I did check the linker path looking for a file starting"
- if test -z "$potlib" ; then
- $echo "*** with $libname but no candidates were found. (...for file magic test)"
- else
- $echo "*** with $libname and none of the candidates passed a file format test"
- $echo "*** using a file magic. Last file checked: $potlib"
- fi
- fi
- else
- # Add a -L argument.
- newdeplibs="$newdeplibs $a_deplib"
- fi
- done # Gone through all deplibs.
- ;;
- match_pattern*)
- set dummy $deplibs_check_method
- match_pattern_regex=`expr "$deplibs_check_method" : "$2 \(.*\)"`
- for a_deplib in $deplibs; do
- name="`expr $a_deplib : '-l\(.*\)'`"
- # If $name is empty we are operating on a -L argument.
- if test -n "$name" && test "$name" != "0"; then
- if test "X$allow_libtool_libs_with_static_runtimes" = "Xyes" ; then
- case " $predeps $postdeps " in
- *" $a_deplib "*)
- newdeplibs="$newdeplibs $a_deplib"
- a_deplib=""
- ;;
- esac
- fi
- if test -n "$a_deplib" ; then
- libname=`eval \\$echo \"$libname_spec\"`
- for i in $lib_search_path $sys_lib_search_path $shlib_search_path; do
- potential_libs=`ls $i/$libname[.-]* 2>/dev/null`
- for potent_lib in $potential_libs; do
- potlib="$potent_lib" # see symlink-check above in file_magic test
- if eval $echo \"$potent_lib\" 2>/dev/null \
- | ${SED} 10q \
- | $EGREP "$match_pattern_regex" > /dev/null; then
- newdeplibs="$newdeplibs $a_deplib"
- a_deplib=""
- break 2
- fi
- done
- done
- fi
- if test -n "$a_deplib" ; then
- droppeddeps=yes
- $echo
- $echo "*** Warning: linker path does not have real file for library $a_deplib."
- $echo "*** I have the capability to make that library automatically link in when"
- $echo "*** you link to this library. But I can only do this if you have a"
- $echo "*** shared version of the library, which you do not appear to have"
- $echo "*** because I did check the linker path looking for a file starting"
- if test -z "$potlib" ; then
- $echo "*** with $libname but no candidates were found. (...for regex pattern test)"
- else
- $echo "*** with $libname and none of the candidates passed a file format test"
- $echo "*** using a regex pattern. Last file checked: $potlib"
- fi
- fi
- else
- # Add a -L argument.
- newdeplibs="$newdeplibs $a_deplib"
- fi
- done # Gone through all deplibs.
- ;;
- none | unknown | *)
- newdeplibs=""
- tmp_deplibs=`$echo "X $deplibs" | $Xsed -e 's/ -lc$//' \
- -e 's/ -[LR][^ ]*//g'`
- if test "X$allow_libtool_libs_with_static_runtimes" = "Xyes" ; then
- for i in $predeps $postdeps ; do
- # can't use Xsed below, because $i might contain '/'
- tmp_deplibs=`$echo "X $tmp_deplibs" | ${SED} -e "1s,^X,," -e "s,$i,,"`
- done
- fi
- if $echo "X $tmp_deplibs" | $Xsed -e 's/[ ]//g' \
- | grep . >/dev/null; then
- $echo
- if test "X$deplibs_check_method" = "Xnone"; then
- $echo "*** Warning: inter-library dependencies are not supported in this platform."
- else
- $echo "*** Warning: inter-library dependencies are not known to be supported."
- fi
- $echo "*** All declared inter-library dependencies are being dropped."
- droppeddeps=yes
- fi
- ;;
- esac
- versuffix=$versuffix_save
- major=$major_save
- release=$release_save
- libname=$libname_save
- name=$name_save
-
- case $host in
- *-*-rhapsody* | *-*-darwin1.[012])
- # On Rhapsody replace the C library is the System framework
- newdeplibs=`$echo "X $newdeplibs" | $Xsed -e 's/ -lc / -framework System /'`
- ;;
- esac
-
- if test "$droppeddeps" = yes; then
- if test "$module" = yes; then
- $echo
- $echo "*** Warning: libtool could not satisfy all declared inter-library"
- $echo "*** dependencies of module $libname. Therefore, libtool will create"
- $echo "*** a static module, that should work as long as the dlopening"
- $echo "*** application is linked with the -dlopen flag."
- if test -z "$global_symbol_pipe"; then
- $echo
- $echo "*** However, this would only work if libtool was able to extract symbol"
- $echo "*** lists from a program, using \`nm' or equivalent, but libtool could"
- $echo "*** not find such a program. So, this module is probably useless."
- $echo "*** \`nm' from GNU binutils and a full rebuild may help."
- fi
- if test "$build_old_libs" = no; then
- oldlibs="$output_objdir/$libname.$libext"
- build_libtool_libs=module
- build_old_libs=yes
- else
- build_libtool_libs=no
- fi
- else
- $echo "*** The inter-library dependencies that have been dropped here will be"
- $echo "*** automatically added whenever a program is linked with this library"
- $echo "*** or is declared to -dlopen it."
-
- if test "$allow_undefined" = no; then
- $echo
- $echo "*** Since this library must not contain undefined symbols,"
- $echo "*** because either the platform does not support them or"
- $echo "*** it was explicitly requested with -no-undefined,"
- $echo "*** libtool will only create a static version of it."
- if test "$build_old_libs" = no; then
- oldlibs="$output_objdir/$libname.$libext"
- build_libtool_libs=module
- build_old_libs=yes
- else
- build_libtool_libs=no
- fi
- fi
- fi
- fi
- # Done checking deplibs!
- deplibs=$newdeplibs
- fi
-
- # All the library-specific variables (install_libdir is set above).
- library_names=
- old_library=
- dlname=
-
- # Test again, we may have decided not to build it any more
- if test "$build_libtool_libs" = yes; then
- if test "$hardcode_into_libs" = yes; then
- # Hardcode the library paths
- hardcode_libdirs=
- dep_rpath=
- rpath="$finalize_rpath"
- test "$mode" != relink && rpath="$compile_rpath$rpath"
- for libdir in $rpath; do
- if test -n "$hardcode_libdir_flag_spec"; then
- if test -n "$hardcode_libdir_separator"; then
- if test -z "$hardcode_libdirs"; then
- hardcode_libdirs="$libdir"
- else
- # Just accumulate the unique libdirs.
- case $hardcode_libdir_separator$hardcode_libdirs$hardcode_libdir_separator in
- *"$hardcode_libdir_separator$libdir$hardcode_libdir_separator"*)
- ;;
- *)
- hardcode_libdirs="$hardcode_libdirs$hardcode_libdir_separator$libdir"
- ;;
- esac
- fi
- else
- eval flag=\"$hardcode_libdir_flag_spec\"
- dep_rpath="$dep_rpath $flag"
- fi
- elif test -n "$runpath_var"; then
- case "$perm_rpath " in
- *" $libdir "*) ;;
- *) perm_rpath="$perm_rpath $libdir" ;;
- esac
- fi
- done
- # Substitute the hardcoded libdirs into the rpath.
- if test -n "$hardcode_libdir_separator" &&
- test -n "$hardcode_libdirs"; then
- libdir="$hardcode_libdirs"
- if test -n "$hardcode_libdir_flag_spec_ld"; then
- eval dep_rpath=\"$hardcode_libdir_flag_spec_ld\"
- else
- eval dep_rpath=\"$hardcode_libdir_flag_spec\"
- fi
- fi
- if test -n "$runpath_var" && test -n "$perm_rpath"; then
- # We should set the runpath_var.
- rpath=
- for dir in $perm_rpath; do
- rpath="$rpath$dir:"
- done
- eval "$runpath_var='$rpath\$$runpath_var'; export $runpath_var"
- fi
- test -n "$dep_rpath" && deplibs="$dep_rpath $deplibs"
- fi
-
- shlibpath="$finalize_shlibpath"
- test "$mode" != relink && shlibpath="$compile_shlibpath$shlibpath"
- if test -n "$shlibpath"; then
- eval "$shlibpath_var='$shlibpath\$$shlibpath_var'; export $shlibpath_var"
- fi
-
- # Get the real and link names of the library.
- eval shared_ext=\"$shrext_cmds\"
- eval library_names=\"$library_names_spec\"
- set dummy $library_names
- realname="$2"
- shift; shift
-
- if test -n "$soname_spec"; then
- eval soname=\"$soname_spec\"
- else
- soname="$realname"
- fi
- if test -z "$dlname"; then
- dlname=$soname
- fi
-
- lib="$output_objdir/$realname"
- for link
- do
- linknames="$linknames $link"
- done
-
- # Use standard objects if they are pic
- test -z "$pic_flag" && libobjs=`$echo "X$libobjs" | $SP2NL | $Xsed -e "$lo2o" | $NL2SP`
-
- # Prepare the list of exported symbols
- if test -z "$export_symbols"; then
- if test "$always_export_symbols" = yes || test -n "$export_symbols_regex"; then
- $show "generating symbol list for \`$libname.la'"
- export_symbols="$output_objdir/$libname.exp"
- $run $rm $export_symbols
- cmds=$export_symbols_cmds
- save_ifs="$IFS"; IFS='~'
- for cmd in $cmds; do
- IFS="$save_ifs"
- eval cmd=\"$cmd\"
- if len=`expr "X$cmd" : ".*"` &&
- test "$len" -le "$max_cmd_len" || test "$max_cmd_len" -le -1; then
- $show "$cmd"
- $run eval "$cmd" || exit $?
- skipped_export=false
- else
- # The command line is too long to execute in one step.
- $show "using reloadable object file for export list..."
- skipped_export=:
- fi
- done
- IFS="$save_ifs"
- if test -n "$export_symbols_regex"; then
- $show "$EGREP -e \"$export_symbols_regex\" \"$export_symbols\" > \"${export_symbols}T\""
- $run eval '$EGREP -e "$export_symbols_regex" "$export_symbols" > "${export_symbols}T"'
- $show "$mv \"${export_symbols}T\" \"$export_symbols\""
- $run eval '$mv "${export_symbols}T" "$export_symbols"'
- fi
- fi
- fi
-
- if test -n "$export_symbols" && test -n "$include_expsyms"; then
- $run eval '$echo "X$include_expsyms" | $SP2NL >> "$export_symbols"'
- fi
-
- tmp_deplibs=
- for test_deplib in $deplibs; do
- case " $convenience " in
- *" $test_deplib "*) ;;
- *)
- tmp_deplibs="$tmp_deplibs $test_deplib"
- ;;
- esac
- done
- deplibs="$tmp_deplibs"
-
- if test -n "$convenience"; then
- if test -n "$whole_archive_flag_spec"; then
- save_libobjs=$libobjs
- eval libobjs=\"\$libobjs $whole_archive_flag_spec\"
- else
- gentop="$output_objdir/${outputname}x"
- generated="$generated $gentop"
-
- func_extract_archives $gentop $convenience
- libobjs="$libobjs $func_extract_archives_result"
- fi
- fi
-
- if test "$thread_safe" = yes && test -n "$thread_safe_flag_spec"; then
- eval flag=\"$thread_safe_flag_spec\"
- linker_flags="$linker_flags $flag"
- fi
-
- # Make a backup of the uninstalled library when relinking
- if test "$mode" = relink; then
- $run eval '(cd $output_objdir && $rm ${realname}U && $mv $realname ${realname}U)' || exit $?
- fi
-
- # Do each of the archive commands.
- if test "$module" = yes && test -n "$module_cmds" ; then
- if test -n "$export_symbols" && test -n "$module_expsym_cmds"; then
- eval test_cmds=\"$module_expsym_cmds\"
- cmds=$module_expsym_cmds
- else
- eval test_cmds=\"$module_cmds\"
- cmds=$module_cmds
- fi
- else
- if test -n "$export_symbols" && test -n "$archive_expsym_cmds"; then
- eval test_cmds=\"$archive_expsym_cmds\"
- cmds=$archive_expsym_cmds
- else
- eval test_cmds=\"$archive_cmds\"
- cmds=$archive_cmds
- fi
- fi
-
- if test "X$skipped_export" != "X:" && len=`expr "X$test_cmds" : ".*"` &&
- test "$len" -le "$max_cmd_len" || test "$max_cmd_len" -le -1; then
- :
- else
- # The command line is too long to link in one step, link piecewise.
- $echo "creating reloadable object files..."
-
- # Save the value of $output and $libobjs because we want to
- # use them later. If we have whole_archive_flag_spec, we
- # want to use save_libobjs as it was before
- # whole_archive_flag_spec was expanded, because we can't
- # assume the linker understands whole_archive_flag_spec.
- # This may have to be revisited, in case too many
- # convenience libraries get linked in and end up exceeding
- # the spec.
- if test -z "$convenience" || test -z "$whole_archive_flag_spec"; then
- save_libobjs=$libobjs
- fi
- save_output=$output
- output_la=`$echo "X$output" | $Xsed -e "$basename"`
-
- # Clear the reloadable object creation command queue and
- # initialize k to one.
- test_cmds=
- concat_cmds=
- objlist=
- delfiles=
- last_robj=
- k=1
- output=$output_objdir/$output_la-${k}.$objext
- # Loop over the list of objects to be linked.
- for obj in $save_libobjs
- do
- eval test_cmds=\"$reload_cmds $objlist $last_robj\"
- if test "X$objlist" = X ||
- { len=`expr "X$test_cmds" : ".*"` &&
- test "$len" -le "$max_cmd_len"; }; then
- objlist="$objlist $obj"
- else
- # The command $test_cmds is almost too long, add a
- # command to the queue.
- if test "$k" -eq 1 ; then
- # The first file doesn't have a previous command to add.
- eval concat_cmds=\"$reload_cmds $objlist $last_robj\"
- else
- # All subsequent reloadable object files will link in
- # the last one created.
- eval concat_cmds=\"\$concat_cmds~$reload_cmds $objlist $last_robj\"
- fi
- last_robj=$output_objdir/$output_la-${k}.$objext
- k=`expr $k + 1`
- output=$output_objdir/$output_la-${k}.$objext
- objlist=$obj
- len=1
- fi
- done
- # Handle the remaining objects by creating one last
- # reloadable object file. All subsequent reloadable object
- # files will link in the last one created.
- test -z "$concat_cmds" || concat_cmds=$concat_cmds~
- eval concat_cmds=\"\${concat_cmds}$reload_cmds $objlist $last_robj\"
-
- if ${skipped_export-false}; then
- $show "generating symbol list for \`$libname.la'"
- export_symbols="$output_objdir/$libname.exp"
- $run $rm $export_symbols
- libobjs=$output
- # Append the command to create the export file.
- eval concat_cmds=\"\$concat_cmds~$export_symbols_cmds\"
- fi
-
- # Set up a command to remove the reloadable object files
- # after they are used.
- i=0
- while test "$i" -lt "$k"
- do
- i=`expr $i + 1`
- delfiles="$delfiles $output_objdir/$output_la-${i}.$objext"
- done
-
- $echo "creating a temporary reloadable object file: $output"
-
- # Loop through the commands generated above and execute them.
- save_ifs="$IFS"; IFS='~'
- for cmd in $concat_cmds; do
- IFS="$save_ifs"
- $show "$cmd"
- $run eval "$cmd" || exit $?
- done
- IFS="$save_ifs"
-
- libobjs=$output
- # Restore the value of output.
- output=$save_output
-
- if test -n "$convenience" && test -n "$whole_archive_flag_spec"; then
- eval libobjs=\"\$libobjs $whole_archive_flag_spec\"
- fi
- # Expand the library linking commands again to reset the
- # value of $libobjs for piecewise linking.
-
- # Do each of the archive commands.
- if test "$module" = yes && test -n "$module_cmds" ; then
- if test -n "$export_symbols" && test -n "$module_expsym_cmds"; then
- cmds=$module_expsym_cmds
- else
- cmds=$module_cmds
- fi
- else
- if test -n "$export_symbols" && test -n "$archive_expsym_cmds"; then
- cmds=$archive_expsym_cmds
- else
- cmds=$archive_cmds
- fi
- fi
-
- # Append the command to remove the reloadable object files
- # to the just-reset $cmds.
- eval cmds=\"\$cmds~\$rm $delfiles\"
- fi
- save_ifs="$IFS"; IFS='~'
- for cmd in $cmds; do
- IFS="$save_ifs"
- eval cmd=\"$cmd\"
- $show "$cmd"
- $run eval "$cmd" || exit $?
- done
- IFS="$save_ifs"
-
- # Restore the uninstalled library and exit
- if test "$mode" = relink; then
- $run eval '(cd $output_objdir && $rm ${realname}T && $mv $realname ${realname}T && $mv "$realname"U $realname)' || exit $?
- exit $EXIT_SUCCESS
- fi
-
- # Create links to the real library.
- for linkname in $linknames; do
- if test "$realname" != "$linkname"; then
- $show "(cd $output_objdir && $rm $linkname && $LN_S $realname $linkname)"
- $run eval '(cd $output_objdir && $rm $linkname && $LN_S $realname $linkname)' || exit $?
- fi
- done
-
- # If -module or -export-dynamic was specified, set the dlname.
- if test "$module" = yes || test "$export_dynamic" = yes; then
- # On all known operating systems, these are identical.
- dlname="$soname"
- fi
- fi
- ;;
-
- obj)
- if test -n "$deplibs"; then
- $echo "$modename: warning: \`-l' and \`-L' are ignored for objects" 1>&2
- fi
-
- if test -n "$dlfiles$dlprefiles" || test "$dlself" != no; then
- $echo "$modename: warning: \`-dlopen' is ignored for objects" 1>&2
- fi
-
- if test -n "$rpath"; then
- $echo "$modename: warning: \`-rpath' is ignored for objects" 1>&2
- fi
-
- if test -n "$xrpath"; then
- $echo "$modename: warning: \`-R' is ignored for objects" 1>&2
- fi
-
- if test -n "$vinfo"; then
- $echo "$modename: warning: \`-version-info' is ignored for objects" 1>&2
- fi
-
- if test -n "$release"; then
- $echo "$modename: warning: \`-release' is ignored for objects" 1>&2
- fi
-
- case $output in
- *.lo)
- if test -n "$objs$old_deplibs"; then
- $echo "$modename: cannot build library object \`$output' from non-libtool objects" 1>&2
- exit $EXIT_FAILURE
- fi
- libobj="$output"
- obj=`$echo "X$output" | $Xsed -e "$lo2o"`
- ;;
- *)
- libobj=
- obj="$output"
- ;;
- esac
-
- # Delete the old objects.
- $run $rm $obj $libobj
-
- # Objects from convenience libraries. This assumes
- # single-version convenience libraries. Whenever we create
- # different ones for PIC/non-PIC, this we'll have to duplicate
- # the extraction.
- reload_conv_objs=
- gentop=
- # reload_cmds runs $LD directly, so let us get rid of
- # -Wl from whole_archive_flag_spec
- wl=
-
- if test -n "$convenience"; then
- if test -n "$whole_archive_flag_spec"; then
- eval reload_conv_objs=\"\$reload_objs $whole_archive_flag_spec\"
- else
- gentop="$output_objdir/${obj}x"
- generated="$generated $gentop"
-
- func_extract_archives $gentop $convenience
- reload_conv_objs="$reload_objs $func_extract_archives_result"
- fi
- fi
-
- # Create the old-style object.
- reload_objs="$objs$old_deplibs "`$echo "X$libobjs" | $SP2NL | $Xsed -e '/\.'${libext}$'/d' -e '/\.lib$/d' -e "$lo2o" | $NL2SP`" $reload_conv_objs" ### testsuite: skip nested quoting test
-
- output="$obj"
- cmds=$reload_cmds
- save_ifs="$IFS"; IFS='~'
- for cmd in $cmds; do
- IFS="$save_ifs"
- eval cmd=\"$cmd\"
- $show "$cmd"
- $run eval "$cmd" || exit $?
- done
- IFS="$save_ifs"
-
- # Exit if we aren't doing a library object file.
- if test -z "$libobj"; then
- if test -n "$gentop"; then
- $show "${rm}r $gentop"
- $run ${rm}r $gentop
- fi
-
- exit $EXIT_SUCCESS
- fi
-
- if test "$build_libtool_libs" != yes; then
- if test -n "$gentop"; then
- $show "${rm}r $gentop"
- $run ${rm}r $gentop
- fi
-
- # Create an invalid libtool object if no PIC, so that we don't
- # accidentally link it into a program.
- # $show "echo timestamp > $libobj"
- # $run eval "echo timestamp > $libobj" || exit $?
- exit $EXIT_SUCCESS
- fi
-
- if test -n "$pic_flag" || test "$pic_mode" != default; then
- # Only do commands if we really have different PIC objects.
- reload_objs="$libobjs $reload_conv_objs"
- output="$libobj"
- cmds=$reload_cmds
- save_ifs="$IFS"; IFS='~'
- for cmd in $cmds; do
- IFS="$save_ifs"
- eval cmd=\"$cmd\"
- $show "$cmd"
- $run eval "$cmd" || exit $?
- done
- IFS="$save_ifs"
- fi
-
- if test -n "$gentop"; then
- $show "${rm}r $gentop"
- $run ${rm}r $gentop
- fi
-
- exit $EXIT_SUCCESS
- ;;
-
- prog)
- case $host in
- *cygwin*) output=`$echo $output | ${SED} -e 's,.exe$,,;s,$,.exe,'` ;;
- esac
- if test -n "$vinfo"; then
- $echo "$modename: warning: \`-version-info' is ignored for programs" 1>&2
- fi
-
- if test -n "$release"; then
- $echo "$modename: warning: \`-release' is ignored for programs" 1>&2
- fi
-
- if test "$preload" = yes; then
- if test "$dlopen_support" = unknown && test "$dlopen_self" = unknown &&
- test "$dlopen_self_static" = unknown; then
- $echo "$modename: warning: \`AC_LIBTOOL_DLOPEN' not used. Assuming no dlopen support."
- fi
- fi
-
- case $host in
- *-*-rhapsody* | *-*-darwin1.[012])
- # On Rhapsody replace the C library is the System framework
- compile_deplibs=`$echo "X $compile_deplibs" | $Xsed -e 's/ -lc / -framework System /'`
- finalize_deplibs=`$echo "X $finalize_deplibs" | $Xsed -e 's/ -lc / -framework System /'`
- ;;
- esac
-
- case $host in
- *darwin*)
- # Don't allow lazy linking, it breaks C++ global constructors
- if test "$tagname" = CXX ; then
- compile_command="$compile_command ${wl}-bind_at_load"
- finalize_command="$finalize_command ${wl}-bind_at_load"
- fi
- ;;
- esac
-
- compile_command="$compile_command $compile_deplibs"
- finalize_command="$finalize_command $finalize_deplibs"
-
- if test -n "$rpath$xrpath"; then
- # If the user specified any rpath flags, then add them.
- for libdir in $rpath $xrpath; do
- # This is the magic to use -rpath.
- case "$finalize_rpath " in
- *" $libdir "*) ;;
- *) finalize_rpath="$finalize_rpath $libdir" ;;
- esac
- done
- fi
-
- # Now hardcode the library paths
- rpath=
- hardcode_libdirs=
- for libdir in $compile_rpath $finalize_rpath; do
- if test -n "$hardcode_libdir_flag_spec"; then
- if test -n "$hardcode_libdir_separator"; then
- if test -z "$hardcode_libdirs"; then
- hardcode_libdirs="$libdir"
- else
- # Just accumulate the unique libdirs.
- case $hardcode_libdir_separator$hardcode_libdirs$hardcode_libdir_separator in
- *"$hardcode_libdir_separator$libdir$hardcode_libdir_separator"*)
- ;;
- *)
- hardcode_libdirs="$hardcode_libdirs$hardcode_libdir_separator$libdir"
- ;;
- esac
- fi
- else
- eval flag=\"$hardcode_libdir_flag_spec\"
- rpath="$rpath $flag"
- fi
- elif test -n "$runpath_var"; then
- case "$perm_rpath " in
- *" $libdir "*) ;;
- *) perm_rpath="$perm_rpath $libdir" ;;
- esac
- fi
- case $host in
- *-*-cygwin* | *-*-mingw* | *-*-pw32* | *-*-os2*)
- case :$dllsearchpath: in
- *":$libdir:"*) ;;
- *) dllsearchpath="$dllsearchpath:$libdir";;
- esac
- ;;
- esac
- done
- # Substitute the hardcoded libdirs into the rpath.
- if test -n "$hardcode_libdir_separator" &&
- test -n "$hardcode_libdirs"; then
- libdir="$hardcode_libdirs"
- eval rpath=\" $hardcode_libdir_flag_spec\"
- fi
- compile_rpath="$rpath"
-
- rpath=
- hardcode_libdirs=
- for libdir in $finalize_rpath; do
- if test -n "$hardcode_libdir_flag_spec"; then
- if test -n "$hardcode_libdir_separator"; then
- if test -z "$hardcode_libdirs"; then
- hardcode_libdirs="$libdir"
- else
- # Just accumulate the unique libdirs.
- case $hardcode_libdir_separator$hardcode_libdirs$hardcode_libdir_separator in
- *"$hardcode_libdir_separator$libdir$hardcode_libdir_separator"*)
- ;;
- *)
- hardcode_libdirs="$hardcode_libdirs$hardcode_libdir_separator$libdir"
- ;;
- esac
- fi
- else
- eval flag=\"$hardcode_libdir_flag_spec\"
- rpath="$rpath $flag"
- fi
- elif test -n "$runpath_var"; then
- case "$finalize_perm_rpath " in
- *" $libdir "*) ;;
- *) finalize_perm_rpath="$finalize_perm_rpath $libdir" ;;
- esac
- fi
- done
- # Substitute the hardcoded libdirs into the rpath.
- if test -n "$hardcode_libdir_separator" &&
- test -n "$hardcode_libdirs"; then
- libdir="$hardcode_libdirs"
- eval rpath=\" $hardcode_libdir_flag_spec\"
- fi
- finalize_rpath="$rpath"
-
- if test -n "$libobjs" && test "$build_old_libs" = yes; then
- # Transform all the library objects into standard objects.
- compile_command=`$echo "X$compile_command" | $SP2NL | $Xsed -e "$lo2o" | $NL2SP`
- finalize_command=`$echo "X$finalize_command" | $SP2NL | $Xsed -e "$lo2o" | $NL2SP`
- fi
-
- dlsyms=
- if test -n "$dlfiles$dlprefiles" || test "$dlself" != no; then
- if test -n "$NM" && test -n "$global_symbol_pipe"; then
- dlsyms="${outputname}S.c"
- else
- $echo "$modename: not configured to extract global symbols from dlpreopened files" 1>&2
- fi
- fi
-
- if test -n "$dlsyms"; then
- case $dlsyms in
- "") ;;
- *.c)
- # Discover the nlist of each of the dlfiles.
- nlist="$output_objdir/${outputname}.nm"
-
- $show "$rm $nlist ${nlist}S ${nlist}T"
- $run $rm "$nlist" "${nlist}S" "${nlist}T"
-
- # Parse the name list into a source file.
- $show "creating $output_objdir/$dlsyms"
-
- test -z "$run" && $echo > "$output_objdir/$dlsyms" "\
-/* $dlsyms - symbol resolution table for \`$outputname' dlsym emulation. */
-/* Generated by $PROGRAM - GNU $PACKAGE $VERSION$TIMESTAMP */
-
-#ifdef __cplusplus
-extern \"C\" {
-#endif
-
-/* Prevent the only kind of declaration conflicts we can make. */
-#define lt_preloaded_symbols some_other_symbol
-
-/* External symbol declarations for the compiler. */\
-"
-
- if test "$dlself" = yes; then
- $show "generating symbol list for \`$output'"
-
- test -z "$run" && $echo ': @PROGRAM@ ' > "$nlist"
-
- # Add our own program objects to the symbol list.
- progfiles=`$echo "X$objs$old_deplibs" | $SP2NL | $Xsed -e "$lo2o" | $NL2SP`
- for arg in $progfiles; do
- $show "extracting global C symbols from \`$arg'"
- $run eval "$NM $arg | $global_symbol_pipe >> '$nlist'"
- done
-
- if test -n "$exclude_expsyms"; then
- $run eval '$EGREP -v " ($exclude_expsyms)$" "$nlist" > "$nlist"T'
- $run eval '$mv "$nlist"T "$nlist"'
- fi
-
- if test -n "$export_symbols_regex"; then
- $run eval '$EGREP -e "$export_symbols_regex" "$nlist" > "$nlist"T'
- $run eval '$mv "$nlist"T "$nlist"'
- fi
-
- # Prepare the list of exported symbols
- if test -z "$export_symbols"; then
- export_symbols="$output_objdir/$outputname.exp"
- $run $rm $export_symbols
- $run eval "${SED} -n -e '/^: @PROGRAM@$/d' -e 's/^.* \(.*\)$/\1/p' "'< "$nlist" > "$export_symbols"'
- else
- $run eval "${SED} -e 's/\([ ][.*^$]\)/\\\1/g' -e 's/^/ /' -e 's/$/$/'"' < "$export_symbols" > "$output_objdir/$outputname.exp"'
- $run eval 'grep -f "$output_objdir/$outputname.exp" < "$nlist" > "$nlist"T'
- $run eval 'mv "$nlist"T "$nlist"'
- fi
- fi
-
- for arg in $dlprefiles; do
- $show "extracting global C symbols from \`$arg'"
- name=`$echo "$arg" | ${SED} -e 's%^.*/%%'`
- $run eval '$echo ": $name " >> "$nlist"'
- $run eval "$NM $arg | $global_symbol_pipe >> '$nlist'"
- done
-
- if test -z "$run"; then
- # Make sure we have at least an empty file.
- test -f "$nlist" || : > "$nlist"
-
- if test -n "$exclude_expsyms"; then
- $EGREP -v " ($exclude_expsyms)$" "$nlist" > "$nlist"T
- $mv "$nlist"T "$nlist"
- fi
-
- # Try sorting and uniquifying the output.
- if grep -v "^: " < "$nlist" |
- if sort -k 3 </dev/null >/dev/null 2>&1; then
- sort -k 3
- else
- sort +2
- fi |
- uniq > "$nlist"S; then
- :
- else
- grep -v "^: " < "$nlist" > "$nlist"S
- fi
-
- if test -f "$nlist"S; then
- eval "$global_symbol_to_cdecl"' < "$nlist"S >> "$output_objdir/$dlsyms"'
- else
- $echo '/* NONE */' >> "$output_objdir/$dlsyms"
- fi
-
- $echo >> "$output_objdir/$dlsyms" "\
-
-#undef lt_preloaded_symbols
-
-#if defined (__STDC__) && __STDC__
-# define lt_ptr void *
-#else
-# define lt_ptr char *
-# define const
-#endif
-
-/* The mapping between symbol names and symbols. */
-"
-
- case $host in
- *cygwin* | *mingw* )
- $echo >> "$output_objdir/$dlsyms" "\
-/* DATA imports from DLLs on WIN32 can't be const, because
- runtime relocations are performed -- see ld's documentation
- on pseudo-relocs */
-struct {
-"
- ;;
- * )
- $echo >> "$output_objdir/$dlsyms" "\
-const struct {
-"
- ;;
- esac
-
-
- $echo >> "$output_objdir/$dlsyms" "\
- const char *name;
- lt_ptr address;
-}
-lt_preloaded_symbols[] =
-{\
-"
-
- eval "$global_symbol_to_c_name_address" < "$nlist" >> "$output_objdir/$dlsyms"
-
- $echo >> "$output_objdir/$dlsyms" "\
- {0, (lt_ptr) 0}
-};
-
-/* This works around a problem in FreeBSD linker */
-#ifdef FREEBSD_WORKAROUND
-static const void *lt_preloaded_setup() {
- return lt_preloaded_symbols;
-}
-#endif
-
-#ifdef __cplusplus
-}
-#endif\
-"
- fi
-
- pic_flag_for_symtable=
- case $host in
- # compiling the symbol table file with pic_flag works around
- # a FreeBSD bug that causes programs to crash when -lm is
- # linked before any other PIC object. But we must not use
- # pic_flag when linking with -static. The problem exists in
- # FreeBSD 2.2.6 and is fixed in FreeBSD 3.1.
- *-*-freebsd2*|*-*-freebsd3.0*|*-*-freebsdelf3.0*)
- case "$compile_command " in
- *" -static "*) ;;
- *) pic_flag_for_symtable=" $pic_flag -DFREEBSD_WORKAROUND";;
- esac;;
- *-*-hpux*)
- case "$compile_command " in
- *" -static "*) ;;
- *) pic_flag_for_symtable=" $pic_flag";;
- esac
- esac
-
- # Now compile the dynamic symbol file.
- $show "(cd $output_objdir && $LTCC -c$no_builtin_flag$pic_flag_for_symtable \"$dlsyms\")"
- $run eval '(cd $output_objdir && $LTCC -c$no_builtin_flag$pic_flag_for_symtable "$dlsyms")' || exit $?
-
- # Clean up the generated files.
- $show "$rm $output_objdir/$dlsyms $nlist ${nlist}S ${nlist}T"
- $run $rm "$output_objdir/$dlsyms" "$nlist" "${nlist}S" "${nlist}T"
-
- # Transform the symbol file into the correct name.
- compile_command=`$echo "X$compile_command" | $Xsed -e "s%@SYMFILE@%$output_objdir/${outputname}S.${objext}%"`
- finalize_command=`$echo "X$finalize_command" | $Xsed -e "s%@SYMFILE@%$output_objdir/${outputname}S.${objext}%"`
- ;;
- *)
- $echo "$modename: unknown suffix for \`$dlsyms'" 1>&2
- exit $EXIT_FAILURE
- ;;
- esac
- else
- # We keep going just in case the user didn't refer to
- # lt_preloaded_symbols. The linker will fail if global_symbol_pipe
- # really was required.
-
- # Nullify the symbol file.
- compile_command=`$echo "X$compile_command" | $Xsed -e "s% @SYMFILE@%%"`
- finalize_command=`$echo "X$finalize_command" | $Xsed -e "s% @SYMFILE@%%"`
- fi
-
- if test "$need_relink" = no || test "$build_libtool_libs" != yes; then
- # Replace the output file specification.
- compile_command=`$echo "X$compile_command" | $Xsed -e 's%@OUTPUT@%'"$output"'%g'`
- link_command="$compile_command$compile_rpath"
-
- # We have no uninstalled library dependencies, so finalize right now.
- $show "$link_command"
- $run eval "$link_command"
- status=$?
-
- # Delete the generated files.
- if test -n "$dlsyms"; then
- $show "$rm $output_objdir/${outputname}S.${objext}"
- $run $rm "$output_objdir/${outputname}S.${objext}"
- fi
-
- exit $status
- fi
-
- if test -n "$shlibpath_var"; then
- # We should set the shlibpath_var
- rpath=
- for dir in $temp_rpath; do
- case $dir in
- [\\/]* | [A-Za-z]:[\\/]*)
- # Absolute path.
- rpath="$rpath$dir:"
- ;;
- *)
- # Relative path: add a thisdir entry.
- rpath="$rpath\$thisdir/$dir:"
- ;;
- esac
- done
- temp_rpath="$rpath"
- fi
-
- if test -n "$compile_shlibpath$finalize_shlibpath"; then
- compile_command="$shlibpath_var=\"$compile_shlibpath$finalize_shlibpath\$$shlibpath_var\" $compile_command"
- fi
- if test -n "$finalize_shlibpath"; then
- finalize_command="$shlibpath_var=\"$finalize_shlibpath\$$shlibpath_var\" $finalize_command"
- fi
-
- compile_var=
- finalize_var=
- if test -n "$runpath_var"; then
- if test -n "$perm_rpath"; then
- # We should set the runpath_var.
- rpath=
- for dir in $perm_rpath; do
- rpath="$rpath$dir:"
- done
- compile_var="$runpath_var=\"$rpath\$$runpath_var\" "
- fi
- if test -n "$finalize_perm_rpath"; then
- # We should set the runpath_var.
- rpath=
- for dir in $finalize_perm_rpath; do
- rpath="$rpath$dir:"
- done
- finalize_var="$runpath_var=\"$rpath\$$runpath_var\" "
- fi
- fi
-
- if test "$no_install" = yes; then
- # We don't need to create a wrapper script.
- link_command="$compile_var$compile_command$compile_rpath"
- # Replace the output file specification.
- link_command=`$echo "X$link_command" | $Xsed -e 's%@OUTPUT@%'"$output"'%g'`
- # Delete the old output file.
- $run $rm $output
- # Link the executable and exit
- $show "$link_command"
- $run eval "$link_command" || exit $?
- exit $EXIT_SUCCESS
- fi
-
- if test "$hardcode_action" = relink; then
- # Fast installation is not supported
- link_command="$compile_var$compile_command$compile_rpath"
- relink_command="$finalize_var$finalize_command$finalize_rpath"
-
- $echo "$modename: warning: this platform does not like uninstalled shared libraries" 1>&2
- $echo "$modename: \`$output' will be relinked during installation" 1>&2
- else
- if test "$fast_install" != no; then
- link_command="$finalize_var$compile_command$finalize_rpath"
- if test "$fast_install" = yes; then
- relink_command=`$echo "X$compile_var$compile_command$compile_rpath" | $Xsed -e 's%@OUTPUT@%\$progdir/\$file%g'`
- else
- # fast_install is set to needless
- relink_command=
- fi
- else
- link_command="$compile_var$compile_command$compile_rpath"
- relink_command="$finalize_var$finalize_command$finalize_rpath"
- fi
- fi
-
- # Replace the output file specification.
- link_command=`$echo "X$link_command" | $Xsed -e 's%@OUTPUT@%'"$output_objdir/$outputname"'%g'`
-
- # Delete the old output files.
- $run $rm $output $output_objdir/$outputname $output_objdir/lt-$outputname
-
- $show "$link_command"
- $run eval "$link_command" || exit $?
-
- # Now create the wrapper script.
- $show "creating $output"
-
- # Quote the relink command for shipping.
- if test -n "$relink_command"; then
- # Preserve any variables that may affect compiler behavior
- for var in $variables_saved_for_relink; do
- if eval test -z \"\${$var+set}\"; then
- relink_command="{ test -z \"\${$var+set}\" || unset $var || { $var=; export $var; }; }; $relink_command"
- elif eval var_value=\$$var; test -z "$var_value"; then
- relink_command="$var=; export $var; $relink_command"
- else
- var_value=`$echo "X$var_value" | $Xsed -e "$sed_quote_subst"`
- relink_command="$var=\"$var_value\"; export $var; $relink_command"
- fi
- done
- relink_command="(cd `pwd`; $relink_command)"
- relink_command=`$echo "X$relink_command" | $Xsed -e "$sed_quote_subst"`
- fi
-
- # Quote $echo for shipping.
- if test "X$echo" = "X$SHELL $progpath --fallback-echo"; then
- case $progpath in
- [\\/]* | [A-Za-z]:[\\/]*) qecho="$SHELL $progpath --fallback-echo";;
- *) qecho="$SHELL `pwd`/$progpath --fallback-echo";;
- esac
- qecho=`$echo "X$qecho" | $Xsed -e "$sed_quote_subst"`
- else
- qecho=`$echo "X$echo" | $Xsed -e "$sed_quote_subst"`
- fi
-
- # Only actually do things if our run command is non-null.
- if test -z "$run"; then
- # win32 will think the script is a binary if it has
- # a .exe suffix, so we strip it off here.
- case $output in
- *.exe) output=`$echo $output|${SED} 's,.exe$,,'` ;;
- esac
- # test for cygwin because mv fails w/o .exe extensions
- case $host in
- *cygwin*)
- exeext=.exe
- outputname=`$echo $outputname|${SED} 's,.exe$,,'` ;;
- *) exeext= ;;
- esac
- case $host in
- *cygwin* | *mingw* )
- cwrappersource=`$echo ${objdir}/lt-${outputname}.c`
- cwrapper=`$echo ${output}.exe`
- $rm $cwrappersource $cwrapper
- trap "$rm $cwrappersource $cwrapper; exit $EXIT_FAILURE" 1 2 15
-
- cat > $cwrappersource <<EOF
-
-/* $cwrappersource - temporary wrapper executable for $objdir/$outputname
- Generated by $PROGRAM - GNU $PACKAGE $VERSION$TIMESTAMP
-
- The $output program cannot be directly executed until all the libtool
- libraries that it depends on are installed.
-
- This wrapper executable should never be moved out of the build directory.
- If it is, it will not operate correctly.
-
- Currently, it simply execs the wrapper *script* "/bin/sh $output",
- but could eventually absorb all of the scripts functionality and
- exec $objdir/$outputname directly.
-*/
-EOF
- cat >> $cwrappersource<<"EOF"
-#include <stdio.h>
-#include <stdlib.h>
-#include <unistd.h>
-#include <malloc.h>
-#include <stdarg.h>
-#include <assert.h>
-
-#if defined(PATH_MAX)
-# define LT_PATHMAX PATH_MAX
-#elif defined(MAXPATHLEN)
-# define LT_PATHMAX MAXPATHLEN
-#else
-# define LT_PATHMAX 1024
-#endif
-
-#ifndef DIR_SEPARATOR
-#define DIR_SEPARATOR '/'
-#endif
-
-#if defined (_WIN32) || defined (__MSDOS__) || defined (__DJGPP__) || \
- defined (__OS2__)
-#define HAVE_DOS_BASED_FILE_SYSTEM
-#ifndef DIR_SEPARATOR_2
-#define DIR_SEPARATOR_2 '\\'
-#endif
-#endif
-
-#ifndef DIR_SEPARATOR_2
-# define IS_DIR_SEPARATOR(ch) ((ch) == DIR_SEPARATOR)
-#else /* DIR_SEPARATOR_2 */
-# define IS_DIR_SEPARATOR(ch) \
- (((ch) == DIR_SEPARATOR) || ((ch) == DIR_SEPARATOR_2))
-#endif /* DIR_SEPARATOR_2 */
-
-#define XMALLOC(type, num) ((type *) xmalloc ((num) * sizeof(type)))
-#define XFREE(stale) do { \
- if (stale) { free ((void *) stale); stale = 0; } \
-} while (0)
-
-const char *program_name = NULL;
-
-void * xmalloc (size_t num);
-char * xstrdup (const char *string);
-char * basename (const char *name);
-char * fnqualify(const char *path);
-char * strendzap(char *str, const char *pat);
-void lt_fatal (const char *message, ...);
-
-int
-main (int argc, char *argv[])
-{
- char **newargz;
- int i;
-
- program_name = (char *) xstrdup ((char *) basename (argv[0]));
- newargz = XMALLOC(char *, argc+2);
-EOF
-
- cat >> $cwrappersource <<EOF
- newargz[0] = "$SHELL";
-EOF
-
- cat >> $cwrappersource <<"EOF"
- newargz[1] = fnqualify(argv[0]);
- /* we know the script has the same name, without the .exe */
- /* so make sure newargz[1] doesn't end in .exe */
- strendzap(newargz[1],".exe");
- for (i = 1; i < argc; i++)
- newargz[i+1] = xstrdup(argv[i]);
- newargz[argc+1] = NULL;
-EOF
-
- cat >> $cwrappersource <<EOF
- execv("$SHELL",newargz);
-EOF
-
- cat >> $cwrappersource <<"EOF"
-}
-
-void *
-xmalloc (size_t num)
-{
- void * p = (void *) malloc (num);
- if (!p)
- lt_fatal ("Memory exhausted");
-
- return p;
-}
-
-char *
-xstrdup (const char *string)
-{
- return string ? strcpy ((char *) xmalloc (strlen (string) + 1), string) : NULL
-;
-}
-
-char *
-basename (const char *name)
-{
- const char *base;
-
-#if defined (HAVE_DOS_BASED_FILE_SYSTEM)
- /* Skip over the disk name in MSDOS pathnames. */
- if (isalpha (name[0]) && name[1] == ':')
- name += 2;
-#endif
-
- for (base = name; *name; name++)
- if (IS_DIR_SEPARATOR (*name))
- base = name + 1;
- return (char *) base;
-}
-
-char *
-fnqualify(const char *path)
-{
- size_t size;
- char *p;
- char tmp[LT_PATHMAX + 1];
-
- assert(path != NULL);
-
- /* Is it qualified already? */
-#if defined (HAVE_DOS_BASED_FILE_SYSTEM)
- if (isalpha (path[0]) && path[1] == ':')
- return xstrdup (path);
-#endif
- if (IS_DIR_SEPARATOR (path[0]))
- return xstrdup (path);
-
- /* prepend the current directory */
- /* doesn't handle '~' */
- if (getcwd (tmp, LT_PATHMAX) == NULL)
- lt_fatal ("getcwd failed");
- size = strlen(tmp) + 1 + strlen(path) + 1; /* +2 for '/' and '\0' */
- p = XMALLOC(char, size);
- sprintf(p, "%s%c%s", tmp, DIR_SEPARATOR, path);
- return p;
-}
-
-char *
-strendzap(char *str, const char *pat)
-{
- size_t len, patlen;
-
- assert(str != NULL);
- assert(pat != NULL);
-
- len = strlen(str);
- patlen = strlen(pat);
-
- if (patlen <= len)
- {
- str += len - patlen;
- if (strcmp(str, pat) == 0)
- *str = '\0';
- }
- return str;
-}
-
-static void
-lt_error_core (int exit_status, const char * mode,
- const char * message, va_list ap)
-{
- fprintf (stderr, "%s: %s: ", program_name, mode);
- vfprintf (stderr, message, ap);
- fprintf (stderr, ".\n");
-
- if (exit_status >= 0)
- exit (exit_status);
-}
-
-void
-lt_fatal (const char *message, ...)
-{
- va_list ap;
- va_start (ap, message);
- lt_error_core (EXIT_FAILURE, "FATAL", message, ap);
- va_end (ap);
-}
-EOF
- # we should really use a build-platform specific compiler
- # here, but OTOH, the wrappers (shell script and this C one)
- # are only useful if you want to execute the "real" binary.
- # Since the "real" binary is built for $host, then this
- # wrapper might as well be built for $host, too.
- $run $LTCC -s -o $cwrapper $cwrappersource
- ;;
- esac
- $rm $output
- trap "$rm $output; exit $EXIT_FAILURE" 1 2 15
-
- $echo > $output "\
-#! $SHELL
-
-# $output - temporary wrapper script for $objdir/$outputname
-# Generated by $PROGRAM - GNU $PACKAGE $VERSION$TIMESTAMP
-#
-# The $output program cannot be directly executed until all the libtool
-# libraries that it depends on are installed.
-#
-# This wrapper script should never be moved out of the build directory.
-# If it is, it will not operate correctly.
-
-# Sed substitution that helps us do robust quoting. It backslashifies
-# metacharacters that are still active within double-quoted strings.
-Xsed='${SED} -e 1s/^X//'
-sed_quote_subst='$sed_quote_subst'
-
-# The HP-UX ksh and POSIX shell print the target directory to stdout
-# if CDPATH is set.
-(unset CDPATH) >/dev/null 2>&1 && unset CDPATH
-
-relink_command=\"$relink_command\"
-
-# This environment variable determines our operation mode.
-if test \"\$libtool_install_magic\" = \"$magic\"; then
- # install mode needs the following variable:
- notinst_deplibs='$notinst_deplibs'
-else
- # When we are sourced in execute mode, \$file and \$echo are already set.
- if test \"\$libtool_execute_magic\" != \"$magic\"; then
- echo=\"$qecho\"
- file=\"\$0\"
- # Make sure echo works.
- if test \"X\$1\" = X--no-reexec; then
- # Discard the --no-reexec flag, and continue.
- shift
- elif test \"X\`(\$echo '\t') 2>/dev/null\`\" = 'X\t'; then
- # Yippee, \$echo works!
- :
- else
- # Restart under the correct shell, and then maybe \$echo will work.
- exec $SHELL \"\$0\" --no-reexec \${1+\"\$@\"}
- fi
- fi\
-"
- $echo >> $output "\
-
- # Find the directory that this script lives in.
- thisdir=\`\$echo \"X\$file\" | \$Xsed -e 's%/[^/]*$%%'\`
- test \"x\$thisdir\" = \"x\$file\" && thisdir=.
-
- # Follow symbolic links until we get to the real thisdir.
- file=\`ls -ld \"\$file\" | ${SED} -n 's/.*-> //p'\`
- while test -n \"\$file\"; do
- destdir=\`\$echo \"X\$file\" | \$Xsed -e 's%/[^/]*\$%%'\`
-
- # If there was a directory component, then change thisdir.
- if test \"x\$destdir\" != \"x\$file\"; then
- case \"\$destdir\" in
- [\\\\/]* | [A-Za-z]:[\\\\/]*) thisdir=\"\$destdir\" ;;
- *) thisdir=\"\$thisdir/\$destdir\" ;;
- esac
- fi
-
- file=\`\$echo \"X\$file\" | \$Xsed -e 's%^.*/%%'\`
- file=\`ls -ld \"\$thisdir/\$file\" | ${SED} -n 's/.*-> //p'\`
- done
-
- # Try to get the absolute directory name.
- absdir=\`cd \"\$thisdir\" && pwd\`
- test -n \"\$absdir\" && thisdir=\"\$absdir\"
-"
-
- if test "$fast_install" = yes; then
- $echo >> $output "\
- program=lt-'$outputname'$exeext
- progdir=\"\$thisdir/$objdir\"
-
- if test ! -f \"\$progdir/\$program\" || \\
- { file=\`ls -1dt \"\$progdir/\$program\" \"\$progdir/../\$program\" 2>/dev/null | ${SED} 1q\`; \\
- test \"X\$file\" != \"X\$progdir/\$program\"; }; then
-
- file=\"\$\$-\$program\"
-
- if test ! -d \"\$progdir\"; then
- $mkdir \"\$progdir\"
- else
- $rm \"\$progdir/\$file\"
- fi"
-
- $echo >> $output "\
-
- # relink executable if necessary
- if test -n \"\$relink_command\"; then
- if relink_command_output=\`eval \$relink_command 2>&1\`; then :
- else
- $echo \"\$relink_command_output\" >&2
- $rm \"\$progdir/\$file\"
- exit $EXIT_FAILURE
- fi
- fi
-
- $mv \"\$progdir/\$file\" \"\$progdir/\$program\" 2>/dev/null ||
- { $rm \"\$progdir/\$program\";
- $mv \"\$progdir/\$file\" \"\$progdir/\$program\"; }
- $rm \"\$progdir/\$file\"
- fi"
- else
- $echo >> $output "\
- program='$outputname'
- progdir=\"\$thisdir/$objdir\"
-"
- fi
-
- $echo >> $output "\
-
- if test -f \"\$progdir/\$program\"; then"
-
- # Export our shlibpath_var if we have one.
- if test "$shlibpath_overrides_runpath" = yes && test -n "$shlibpath_var" && test -n "$temp_rpath"; then
- $echo >> $output "\
- # Add our own library path to $shlibpath_var
- $shlibpath_var=\"$temp_rpath\$$shlibpath_var\"
-
- # Some systems cannot cope with colon-terminated $shlibpath_var
- # The second colon is a workaround for a bug in BeOS R4 sed
- $shlibpath_var=\`\$echo \"X\$$shlibpath_var\" | \$Xsed -e 's/::*\$//'\`
-
- export $shlibpath_var
-"
- fi
-
- # fixup the dll searchpath if we need to.
- if test -n "$dllsearchpath"; then
- $echo >> $output "\
- # Add the dll search path components to the executable PATH
- PATH=$dllsearchpath:\$PATH
-"
- fi
-
- $echo >> $output "\
- if test \"\$libtool_execute_magic\" != \"$magic\"; then
- # Run the actual program with our arguments.
-"
- case $host in
- # Backslashes separate directories on plain windows
- *-*-mingw | *-*-os2*)
- $echo >> $output "\
- exec \$progdir\\\\\$program \${1+\"\$@\"}
-"
- ;;
-
- *)
- $echo >> $output "\
- exec \$progdir/\$program \${1+\"\$@\"}
-"
- ;;
- esac
- $echo >> $output "\
- \$echo \"\$0: cannot exec \$program \${1+\"\$@\"}\"
- exit $EXIT_FAILURE
- fi
- else
- # The program doesn't exist.
- \$echo \"\$0: error: \$progdir/\$program does not exist\" 1>&2
- \$echo \"This script is just a wrapper for \$program.\" 1>&2
- $echo \"See the $PACKAGE documentation for more information.\" 1>&2
- exit $EXIT_FAILURE
- fi
-fi\
-"
- chmod +x $output
- fi
- exit $EXIT_SUCCESS
- ;;
- esac
-
- # See if we need to build an old-fashioned archive.
- for oldlib in $oldlibs; do
-
- if test "$build_libtool_libs" = convenience; then
- oldobjs="$libobjs_save"
- addlibs="$convenience"
- build_libtool_libs=no
- else
- if test "$build_libtool_libs" = module; then
- oldobjs="$libobjs_save"
- build_libtool_libs=no
- else
- oldobjs="$old_deplibs $non_pic_objects"
- fi
- addlibs="$old_convenience"
- fi
-
- if test -n "$addlibs"; then
- gentop="$output_objdir/${outputname}x"
- generated="$generated $gentop"
-
- func_extract_archives $gentop $addlibs
- oldobjs="$oldobjs $func_extract_archives_result"
- fi
-
- # Do each command in the archive commands.
- if test -n "$old_archive_from_new_cmds" && test "$build_libtool_libs" = yes; then
- cmds=$old_archive_from_new_cmds
- else
- # POSIX demands no paths to be encoded in archives. We have
- # to avoid creating archives with duplicate basenames if we
- # might have to extract them afterwards, e.g., when creating a
- # static archive out of a convenience library, or when linking
- # the entirety of a libtool archive into another (currently
- # not supported by libtool).
- if (for obj in $oldobjs
- do
- $echo "X$obj" | $Xsed -e 's%^.*/%%'
- done | sort | sort -uc >/dev/null 2>&1); then
- :
- else
- $echo "copying selected object files to avoid basename conflicts..."
-
- if test -z "$gentop"; then
- gentop="$output_objdir/${outputname}x"
- generated="$generated $gentop"
-
- $show "${rm}r $gentop"
- $run ${rm}r "$gentop"
- $show "$mkdir $gentop"
- $run $mkdir "$gentop"
- status=$?
- if test "$status" -ne 0 && test ! -d "$gentop"; then
- exit $status
- fi
- fi
-
- save_oldobjs=$oldobjs
- oldobjs=
- counter=1
- for obj in $save_oldobjs
- do
- objbase=`$echo "X$obj" | $Xsed -e 's%^.*/%%'`
- case " $oldobjs " in
- " ") oldobjs=$obj ;;
- *[\ /]"$objbase "*)
- while :; do
- # Make sure we don't pick an alternate name that also
- # overlaps.
- newobj=lt$counter-$objbase
- counter=`expr $counter + 1`
- case " $oldobjs " in
- *[\ /]"$newobj "*) ;;
- *) if test ! -f "$gentop/$newobj"; then break; fi ;;
- esac
- done
- $show "ln $obj $gentop/$newobj || cp $obj $gentop/$newobj"
- $run ln "$obj" "$gentop/$newobj" ||
- $run cp "$obj" "$gentop/$newobj"
- oldobjs="$oldobjs $gentop/$newobj"
- ;;
- *) oldobjs="$oldobjs $obj" ;;
- esac
- done
- fi
-
- eval cmds=\"$old_archive_cmds\"
-
- if len=`expr "X$cmds" : ".*"` &&
- test "$len" -le "$max_cmd_len" || test "$max_cmd_len" -le -1; then
- cmds=$old_archive_cmds
- else
- # the command line is too long to link in one step, link in parts
- $echo "using piecewise archive linking..."
- save_RANLIB=$RANLIB
- RANLIB=:
- objlist=
- concat_cmds=
- save_oldobjs=$oldobjs
-
- # Is there a better way of finding the last object in the list?
- for obj in $save_oldobjs
- do
- last_oldobj=$obj
- done
- for obj in $save_oldobjs
- do
- oldobjs="$objlist $obj"
- objlist="$objlist $obj"
- eval test_cmds=\"$old_archive_cmds\"
- if len=`expr "X$test_cmds" : ".*"` &&
- test "$len" -le "$max_cmd_len"; then
- :
- else
- # the above command should be used before it gets too long
- oldobjs=$objlist
- if test "$obj" = "$last_oldobj" ; then
- RANLIB=$save_RANLIB
- fi
- test -z "$concat_cmds" || concat_cmds=$concat_cmds~
- eval concat_cmds=\"\${concat_cmds}$old_archive_cmds\"
- objlist=
- fi
- done
- RANLIB=$save_RANLIB
- oldobjs=$objlist
- if test "X$oldobjs" = "X" ; then
- eval cmds=\"\$concat_cmds\"
- else
- eval cmds=\"\$concat_cmds~\$old_archive_cmds\"
- fi
- fi
- fi
- save_ifs="$IFS"; IFS='~'
- for cmd in $cmds; do
- eval cmd=\"$cmd\"
- IFS="$save_ifs"
- $show "$cmd"
- $run eval "$cmd" || exit $?
- done
- IFS="$save_ifs"
- done
-
- if test -n "$generated"; then
- $show "${rm}r$generated"
- $run ${rm}r$generated
- fi
-
- # Now create the libtool archive.
- case $output in
- *.la)
- old_library=
- test "$build_old_libs" = yes && old_library="$libname.$libext"
- $show "creating $output"
-
- # Preserve any variables that may affect compiler behavior
- for var in $variables_saved_for_relink; do
- if eval test -z \"\${$var+set}\"; then
- relink_command="{ test -z \"\${$var+set}\" || unset $var || { $var=; export $var; }; }; $relink_command"
- elif eval var_value=\$$var; test -z "$var_value"; then
- relink_command="$var=; export $var; $relink_command"
- else
- var_value=`$echo "X$var_value" | $Xsed -e "$sed_quote_subst"`
- relink_command="$var=\"$var_value\"; export $var; $relink_command"
- fi
- done
- # Quote the link command for shipping.
- relink_command="(cd `pwd`; $SHELL $progpath $preserve_args --mode=relink $libtool_args @inst_prefix_dir@)"
- relink_command=`$echo "X$relink_command" | $Xsed -e "$sed_quote_subst"`
- if test "$hardcode_automatic" = yes ; then
- relink_command=
- fi
-
-
- # Only create the output if not a dry run.
- if test -z "$run"; then
- for installed in no yes; do
- if test "$installed" = yes; then
- if test -z "$install_libdir"; then
- break
- fi
- output="$output_objdir/$outputname"i
- # Replace all uninstalled libtool libraries with the installed ones
- newdependency_libs=
- for deplib in $dependency_libs; do
- case $deplib in
- *.la)
- name=`$echo "X$deplib" | $Xsed -e 's%^.*/%%'`
- eval libdir=`${SED} -n -e 's/^libdir=\(.*\)$/\1/p' $deplib`
- if test -z "$libdir"; then
- $echo "$modename: \`$deplib' is not a valid libtool archive" 1>&2
- exit $EXIT_FAILURE
- fi
- newdependency_libs="$newdependency_libs $libdir/$name"
- ;;
- *) newdependency_libs="$newdependency_libs $deplib" ;;
- esac
- done
- dependency_libs="$newdependency_libs"
- newdlfiles=
- for lib in $dlfiles; do
- name=`$echo "X$lib" | $Xsed -e 's%^.*/%%'`
- eval libdir=`${SED} -n -e 's/^libdir=\(.*\)$/\1/p' $lib`
- if test -z "$libdir"; then
- $echo "$modename: \`$lib' is not a valid libtool archive" 1>&2
- exit $EXIT_FAILURE
- fi
- newdlfiles="$newdlfiles $libdir/$name"
- done
- dlfiles="$newdlfiles"
- newdlprefiles=
- for lib in $dlprefiles; do
- name=`$echo "X$lib" | $Xsed -e 's%^.*/%%'`
- eval libdir=`${SED} -n -e 's/^libdir=\(.*\)$/\1/p' $lib`
- if test -z "$libdir"; then
- $echo "$modename: \`$lib' is not a valid libtool archive" 1>&2
- exit $EXIT_FAILURE
- fi
- newdlprefiles="$newdlprefiles $libdir/$name"
- done
- dlprefiles="$newdlprefiles"
- else
- newdlfiles=
- for lib in $dlfiles; do
- case $lib in
- [\\/]* | [A-Za-z]:[\\/]*) abs="$lib" ;;
- *) abs=`pwd`"/$lib" ;;
- esac
- newdlfiles="$newdlfiles $abs"
- done
- dlfiles="$newdlfiles"
- newdlprefiles=
- for lib in $dlprefiles; do
- case $lib in
- [\\/]* | [A-Za-z]:[\\/]*) abs="$lib" ;;
- *) abs=`pwd`"/$lib" ;;
- esac
- newdlprefiles="$newdlprefiles $abs"
- done
- dlprefiles="$newdlprefiles"
- fi
- $rm $output
- # place dlname in correct position for cygwin
- tdlname=$dlname
- case $host,$output,$installed,$module,$dlname in
- *cygwin*,*lai,yes,no,*.dll | *mingw*,*lai,yes,no,*.dll) tdlname=../bin/$dlname ;;
- esac
- $echo > $output "\
-# $outputname - a libtool library file
-# Generated by $PROGRAM - GNU $PACKAGE $VERSION$TIMESTAMP
-#
-# Please DO NOT delete this file!
-# It is necessary for linking the library.
-
-# The name that we can dlopen(3).
-dlname='$tdlname'
-
-# Names of this library.
-library_names='$library_names'
-
-# The name of the static archive.
-old_library='$old_library'
-
-# Libraries that this one depends upon.
-dependency_libs='$dependency_libs'
-
-# Version information for $libname.
-current=$current
-age=$age
-revision=$revision
-
-# Is this an already installed library?
-installed=$installed
-
-# Should we warn about portability when linking against -modules?
-shouldnotlink=$module
-
-# Files to dlopen/dlpreopen
-dlopen='$dlfiles'
-dlpreopen='$dlprefiles'
-
-# Directory that this library needs to be installed in:
-libdir='$install_libdir'"
- if test "$installed" = no && test "$need_relink" = yes; then
- $echo >> $output "\
-relink_command=\"$relink_command\""
- fi
- done
- fi
-
- # Do a symbolic link so that the libtool archive can be found in
- # LD_LIBRARY_PATH before the program is installed.
- $show "(cd $output_objdir && $rm $outputname && $LN_S ../$outputname $outputname)"
- $run eval '(cd $output_objdir && $rm $outputname && $LN_S ../$outputname $outputname)' || exit $?
- ;;
- esac
- exit $EXIT_SUCCESS
- ;;
-
- # libtool install mode
- install)
- modename="$modename: install"
-
- # There may be an optional sh(1) argument at the beginning of
- # install_prog (especially on Windows NT).
- if test "$nonopt" = "$SHELL" || test "$nonopt" = /bin/sh ||
- # Allow the use of GNU shtool's install command.
- $echo "X$nonopt" | $Xsed | grep shtool > /dev/null; then
- # Aesthetically quote it.
- arg=`$echo "X$nonopt" | $Xsed -e "$sed_quote_subst"`
- case $arg in
- *$quote_scanset* | *]* | *\|* | *\&* | *\(* | *\)* | "")
- arg="\"$arg\""
- ;;
- esac
- install_prog="$arg "
- arg="$1"
- shift
- else
- install_prog=
- arg="$nonopt"
- fi
-
- # The real first argument should be the name of the installation program.
- # Aesthetically quote it.
- arg=`$echo "X$arg" | $Xsed -e "$sed_quote_subst"`
- case $arg in
- *$quote_scanset* | *]* | *\|* | *\&* | *\(* | *\)* | "")
- arg="\"$arg\""
- ;;
- esac
- install_prog="$install_prog$arg"
-
- # We need to accept at least all the BSD install flags.
- dest=
- files=
- opts=
- prev=
- install_type=
- isdir=no
- stripme=
- for arg
- do
- if test -n "$dest"; then
- files="$files $dest"
- dest="$arg"
- continue
- fi
-
- case $arg in
- -d) isdir=yes ;;
- -f) prev="-f" ;;
- -g) prev="-g" ;;
- -m) prev="-m" ;;
- -o) prev="-o" ;;
- -s)
- stripme=" -s"
- continue
- ;;
- -*) ;;
-
- *)
- # If the previous option needed an argument, then skip it.
- if test -n "$prev"; then
- prev=
- else
- dest="$arg"
- continue
- fi
- ;;
- esac
-
- # Aesthetically quote the argument.
- arg=`$echo "X$arg" | $Xsed -e "$sed_quote_subst"`
- case $arg in
- *$quote_scanset* | *]* | *\|* | *\&* | *\(* | *\)* | "")
- arg="\"$arg\""
- ;;
- esac
- install_prog="$install_prog $arg"
- done
-
- if test -z "$install_prog"; then
- $echo "$modename: you must specify an install program" 1>&2
- $echo "$help" 1>&2
- exit $EXIT_FAILURE
- fi
-
- if test -n "$prev"; then
- $echo "$modename: the \`$prev' option requires an argument" 1>&2
- $echo "$help" 1>&2
- exit $EXIT_FAILURE
- fi
-
- if test -z "$files"; then
- if test -z "$dest"; then
- $echo "$modename: no file or destination specified" 1>&2
- else
- $echo "$modename: you must specify a destination" 1>&2
- fi
- $echo "$help" 1>&2
- exit $EXIT_FAILURE
- fi
-
- # Strip any trailing slash from the destination.
- dest=`$echo "X$dest" | $Xsed -e 's%/$%%'`
-
- # Check to see that the destination is a directory.
- test -d "$dest" && isdir=yes
- if test "$isdir" = yes; then
- destdir="$dest"
- destname=
- else
- destdir=`$echo "X$dest" | $Xsed -e 's%/[^/]*$%%'`
- test "X$destdir" = "X$dest" && destdir=.
- destname=`$echo "X$dest" | $Xsed -e 's%^.*/%%'`
-
- # Not a directory, so check to see that there is only one file specified.
- set dummy $files
- if test "$#" -gt 2; then
- $echo "$modename: \`$dest' is not a directory" 1>&2
- $echo "$help" 1>&2
- exit $EXIT_FAILURE
- fi
- fi
- case $destdir in
- [\\/]* | [A-Za-z]:[\\/]*) ;;
- *)
- for file in $files; do
- case $file in
- *.lo) ;;
- *)
- $echo "$modename: \`$destdir' must be an absolute directory name" 1>&2
- $echo "$help" 1>&2
- exit $EXIT_FAILURE
- ;;
- esac
- done
- ;;
- esac
-
- # This variable tells wrapper scripts just to set variables rather
- # than running their programs.
- libtool_install_magic="$magic"
-
- staticlibs=
- future_libdirs=
- current_libdirs=
- for file in $files; do
-
- # Do each installation.
- case $file in
- *.$libext)
- # Do the static libraries later.
- staticlibs="$staticlibs $file"
- ;;
-
- *.la)
- # Check to see that this really is a libtool archive.
- if (${SED} -e '2q' $file | grep "^# Generated by .*$PACKAGE") >/dev/null 2>&1; then :
- else
- $echo "$modename: \`$file' is not a valid libtool archive" 1>&2
- $echo "$help" 1>&2
- exit $EXIT_FAILURE
- fi
-
- library_names=
- old_library=
- relink_command=
- # If there is no directory component, then add one.
- case $file in
- */* | *\\*) . $file ;;
- *) . ./$file ;;
- esac
-
- # Add the libdir to current_libdirs if it is the destination.
- if test "X$destdir" = "X$libdir"; then
- case "$current_libdirs " in
- *" $libdir "*) ;;
- *) current_libdirs="$current_libdirs $libdir" ;;
- esac
- else
- # Note the libdir as a future libdir.
- case "$future_libdirs " in
- *" $libdir "*) ;;
- *) future_libdirs="$future_libdirs $libdir" ;;
- esac
- fi
-
- dir=`$echo "X$file" | $Xsed -e 's%/[^/]*$%%'`/
- test "X$dir" = "X$file/" && dir=
- dir="$dir$objdir"
-
- if test -n "$relink_command"; then
- # Determine the prefix the user has applied to our future dir.
- inst_prefix_dir=`$echo "$destdir" | $SED "s%$libdir\$%%"`
-
- # Don't allow the user to place us outside of our expected
- # location b/c this prevents finding dependent libraries that
- # are installed to the same prefix.
- # At present, this check doesn't affect windows .dll's that
- # are installed into $libdir/../bin (currently, that works fine)
- # but it's something to keep an eye on.
- if test "$inst_prefix_dir" = "$destdir"; then
- $echo "$modename: error: cannot install \`$file' to a directory not ending in $libdir" 1>&2
- exit $EXIT_FAILURE
- fi
-
- if test -n "$inst_prefix_dir"; then
- # Stick the inst_prefix_dir data into the link command.
- relink_command=`$echo "$relink_command" | $SED "s%@inst_prefix_dir@%-inst-prefix-dir $inst_prefix_dir%"`
- else
- relink_command=`$echo "$relink_command" | $SED "s%@inst_prefix_dir@%%"`
- fi
-
- $echo "$modename: warning: relinking \`$file'" 1>&2
- $show "$relink_command"
- if $run eval "$relink_command"; then :
- else
- $echo "$modename: error: relink \`$file' with the above command before installing it" 1>&2
- exit $EXIT_FAILURE
- fi
- fi
-
- # See the names of the shared library.
- set dummy $library_names
- if test -n "$2"; then
- realname="$2"
- shift
- shift
-
- srcname="$realname"
- test -n "$relink_command" && srcname="$realname"T
-
- # Install the shared library and build the symlinks.
- $show "$install_prog $dir/$srcname $destdir/$realname"
- $run eval "$install_prog $dir/$srcname $destdir/$realname" || exit $?
- if test -n "$stripme" && test -n "$striplib"; then
- $show "$striplib $destdir/$realname"
- $run eval "$striplib $destdir/$realname" || exit $?
- fi
-
- if test "$#" -gt 0; then
- # Delete the old symlinks, and create new ones.
- for linkname
- do
- if test "$linkname" != "$realname"; then
- $show "(cd $destdir && $rm $linkname && $LN_S $realname $linkname)"
- $run eval "(cd $destdir && $rm $linkname && $LN_S $realname $linkname)"
- fi
- done
- fi
-
- # Do each command in the postinstall commands.
- lib="$destdir/$realname"
- cmds=$postinstall_cmds
- save_ifs="$IFS"; IFS='~'
- for cmd in $cmds; do
- IFS="$save_ifs"
- eval cmd=\"$cmd\"
- $show "$cmd"
- $run eval "$cmd" || exit $?
- done
- IFS="$save_ifs"
- fi
-
- # Install the pseudo-library for information purposes.
- name=`$echo "X$file" | $Xsed -e 's%^.*/%%'`
- instname="$dir/$name"i
- $show "$install_prog $instname $destdir/$name"
- $run eval "$install_prog $instname $destdir/$name" || exit $?
-
- # Maybe install the static library, too.
- test -n "$old_library" && staticlibs="$staticlibs $dir/$old_library"
- ;;
-
- *.lo)
- # Install (i.e. copy) a libtool object.
-
- # Figure out destination file name, if it wasn't already specified.
- if test -n "$destname"; then
- destfile="$destdir/$destname"
- else
- destfile=`$echo "X$file" | $Xsed -e 's%^.*/%%'`
- destfile="$destdir/$destfile"
- fi
-
- # Deduce the name of the destination old-style object file.
- case $destfile in
- *.lo)
- staticdest=`$echo "X$destfile" | $Xsed -e "$lo2o"`
- ;;
- *.$objext)
- staticdest="$destfile"
- destfile=
- ;;
- *)
- $echo "$modename: cannot copy a libtool object to \`$destfile'" 1>&2
- $echo "$help" 1>&2
- exit $EXIT_FAILURE
- ;;
- esac
-
- # Install the libtool object if requested.
- if test -n "$destfile"; then
- $show "$install_prog $file $destfile"
- $run eval "$install_prog $file $destfile" || exit $?
- fi
-
- # Install the old object if enabled.
- if test "$build_old_libs" = yes; then
- # Deduce the name of the old-style object file.
- staticobj=`$echo "X$file" | $Xsed -e "$lo2o"`
-
- $show "$install_prog $staticobj $staticdest"
- $run eval "$install_prog \$staticobj \$staticdest" || exit $?
- fi
- exit $EXIT_SUCCESS
- ;;
-
- *)
- # Figure out destination file name, if it wasn't already specified.
- if test -n "$destname"; then
- destfile="$destdir/$destname"
- else
- destfile=`$echo "X$file" | $Xsed -e 's%^.*/%%'`
- destfile="$destdir/$destfile"
- fi
-
- # If the file is missing, and there is a .exe on the end, strip it
- # because it is most likely a libtool script we actually want to
- # install
- stripped_ext=""
- case $file in
- *.exe)
- if test ! -f "$file"; then
- file=`$echo $file|${SED} 's,.exe$,,'`
- stripped_ext=".exe"
- fi
- ;;
- esac
-
- # Do a test to see if this is really a libtool program.
- case $host in
- *cygwin*|*mingw*)
- wrapper=`$echo $file | ${SED} -e 's,.exe$,,'`
- ;;
- *)
- wrapper=$file
- ;;
- esac
- if (${SED} -e '4q' $wrapper | grep "^# Generated by .*$PACKAGE")>/dev/null 2>&1; then
- notinst_deplibs=
- relink_command=
-
- # To insure that "foo" is sourced, and not "foo.exe",
- # finese the cygwin/MSYS system by explicitly sourcing "foo."
- # which disallows the automatic-append-.exe behavior.
- case $build in
- *cygwin* | *mingw*) wrapperdot=${wrapper}. ;;
- *) wrapperdot=${wrapper} ;;
- esac
- # If there is no directory component, then add one.
- case $file in
- */* | *\\*) . ${wrapperdot} ;;
- *) . ./${wrapperdot} ;;
- esac
-
- # Check the variables that should have been set.
- if test -z "$notinst_deplibs"; then
- $echo "$modename: invalid libtool wrapper script \`$wrapper'" 1>&2
- exit $EXIT_FAILURE
- fi
-
- finalize=yes
- for lib in $notinst_deplibs; do
- # Check to see that each library is installed.
- libdir=
- if test -f "$lib"; then
- # If there is no directory component, then add one.
- case $lib in
- */* | *\\*) . $lib ;;
- *) . ./$lib ;;
- esac
- fi
- libfile="$libdir/"`$echo "X$lib" | $Xsed -e 's%^.*/%%g'` ### testsuite: skip nested quoting test
- if test -n "$libdir" && test ! -f "$libfile"; then
- $echo "$modename: warning: \`$lib' has not been installed in \`$libdir'" 1>&2
- finalize=no
- fi
- done
-
- relink_command=
- # To insure that "foo" is sourced, and not "foo.exe",
- # finese the cygwin/MSYS system by explicitly sourcing "foo."
- # which disallows the automatic-append-.exe behavior.
- case $build in
- *cygwin* | *mingw*) wrapperdot=${wrapper}. ;;
- *) wrapperdot=${wrapper} ;;
- esac
- # If there is no directory component, then add one.
- case $file in
- */* | *\\*) . ${wrapperdot} ;;
- *) . ./${wrapperdot} ;;
- esac
-
- outputname=
- if test "$fast_install" = no && test -n "$relink_command"; then
- if test "$finalize" = yes && test -z "$run"; then
- tmpdir="/tmp"
- test -n "$TMPDIR" && tmpdir="$TMPDIR"
- tmpdir="$tmpdir/libtool-$$"
- save_umask=`umask`
- umask 0077
- if $mkdir "$tmpdir"; then
- umask $save_umask
- else
- umask $save_umask
- $echo "$modename: error: cannot create temporary directory \`$tmpdir'" 1>&2
- continue
- fi
- file=`$echo "X$file$stripped_ext" | $Xsed -e 's%^.*/%%'`
- outputname="$tmpdir/$file"
- # Replace the output file specification.
- relink_command=`$echo "X$relink_command" | $Xsed -e 's%@OUTPUT@%'"$outputname"'%g'`
-
- $show "$relink_command"
- if $run eval "$relink_command"; then :
- else
- $echo "$modename: error: relink \`$file' with the above command before installing it" 1>&2
- ${rm}r "$tmpdir"
- continue
- fi
- file="$outputname"
- else
- $echo "$modename: warning: cannot relink \`$file'" 1>&2
- fi
- else
- # Install the binary that we compiled earlier.
- file=`$echo "X$file$stripped_ext" | $Xsed -e "s%\([^/]*\)$%$objdir/\1%"`
- fi
- fi
-
- # remove .exe since cygwin /usr/bin/install will append another
- # one anyways
- case $install_prog,$host in
- */usr/bin/install*,*cygwin*)
- case $file:$destfile in
- *.exe:*.exe)
- # this is ok
- ;;
- *.exe:*)
- destfile=$destfile.exe
- ;;
- *:*.exe)
- destfile=`$echo $destfile | ${SED} -e 's,.exe$,,'`
- ;;
- esac
- ;;
- esac
- $show "$install_prog$stripme $file $destfile"
- $run eval "$install_prog\$stripme \$file \$destfile" || exit $?
- test -n "$outputname" && ${rm}r "$tmpdir"
- ;;
- esac
- done
-
- for file in $staticlibs; do
- name=`$echo "X$file" | $Xsed -e 's%^.*/%%'`
-
- # Set up the ranlib parameters.
- oldlib="$destdir/$name"
-
- $show "$install_prog $file $oldlib"
- $run eval "$install_prog \$file \$oldlib" || exit $?
-
- if test -n "$stripme" && test -n "$old_striplib"; then
- $show "$old_striplib $oldlib"
- $run eval "$old_striplib $oldlib" || exit $?
- fi
-
- # Do each command in the postinstall commands.
- cmds=$old_postinstall_cmds
- save_ifs="$IFS"; IFS='~'
- for cmd in $cmds; do
- IFS="$save_ifs"
- eval cmd=\"$cmd\"
- $show "$cmd"
- $run eval "$cmd" || exit $?
- done
- IFS="$save_ifs"
- done
-
- if test -n "$future_libdirs"; then
- $echo "$modename: warning: remember to run \`$progname --finish$future_libdirs'" 1>&2
- fi
-
- if test -n "$current_libdirs"; then
- # Maybe just do a dry run.
- test -n "$run" && current_libdirs=" -n$current_libdirs"
- exec_cmd='$SHELL $progpath $preserve_args --finish$current_libdirs'
- else
- exit $EXIT_SUCCESS
- fi
- ;;
-
- # libtool finish mode
- finish)
- modename="$modename: finish"
- libdirs="$nonopt"
- admincmds=
-
- if test -n "$finish_cmds$finish_eval" && test -n "$libdirs"; then
- for dir
- do
- libdirs="$libdirs $dir"
- done
-
- for libdir in $libdirs; do
- if test -n "$finish_cmds"; then
- # Do each command in the finish commands.
- cmds=$finish_cmds
- save_ifs="$IFS"; IFS='~'
- for cmd in $cmds; do
- IFS="$save_ifs"
- eval cmd=\"$cmd\"
- $show "$cmd"
- $run eval "$cmd" || admincmds="$admincmds
- $cmd"
- done
- IFS="$save_ifs"
- fi
- if test -n "$finish_eval"; then
- # Do the single finish_eval.
- eval cmds=\"$finish_eval\"
- $run eval "$cmds" || admincmds="$admincmds
- $cmds"
- fi
- done
- fi
-
- # Exit here if they wanted silent mode.
- test "$show" = : && exit $EXIT_SUCCESS
-
- $echo "----------------------------------------------------------------------"
- $echo "Libraries have been installed in:"
- for libdir in $libdirs; do
- $echo " $libdir"
- done
- $echo
- $echo "If you ever happen to want to link against installed libraries"
- $echo "in a given directory, LIBDIR, you must either use libtool, and"
- $echo "specify the full pathname of the library, or use the \`-LLIBDIR'"
- $echo "flag during linking and do at least one of the following:"
- if test -n "$shlibpath_var"; then
- $echo " - add LIBDIR to the \`$shlibpath_var' environment variable"
- $echo " during execution"
- fi
- if test -n "$runpath_var"; then
- $echo " - add LIBDIR to the \`$runpath_var' environment variable"
- $echo " during linking"
- fi
- if test -n "$hardcode_libdir_flag_spec"; then
- libdir=LIBDIR
- eval flag=\"$hardcode_libdir_flag_spec\"
-
- $echo " - use the \`$flag' linker flag"
- fi
- if test -n "$admincmds"; then
- $echo " - have your system administrator run these commands:$admincmds"
- fi
- if test -f /etc/ld.so.conf; then
- $echo " - have your system administrator add LIBDIR to \`/etc/ld.so.conf'"
- fi
- $echo
- $echo "See any operating system documentation about shared libraries for"
- $echo "more information, such as the ld(1) and ld.so(8) manual pages."
- $echo "----------------------------------------------------------------------"
- exit $EXIT_SUCCESS
- ;;
-
- # libtool execute mode
- execute)
- modename="$modename: execute"
-
- # The first argument is the command name.
- cmd="$nonopt"
- if test -z "$cmd"; then
- $echo "$modename: you must specify a COMMAND" 1>&2
- $echo "$help"
- exit $EXIT_FAILURE
- fi
-
- # Handle -dlopen flags immediately.
- for file in $execute_dlfiles; do
- if test ! -f "$file"; then
- $echo "$modename: \`$file' is not a file" 1>&2
- $echo "$help" 1>&2
- exit $EXIT_FAILURE
- fi
-
- dir=
- case $file in
- *.la)
- # Check to see that this really is a libtool archive.
- if (${SED} -e '2q' $file | grep "^# Generated by .*$PACKAGE") >/dev/null 2>&1; then :
- else
- $echo "$modename: \`$lib' is not a valid libtool archive" 1>&2
- $echo "$help" 1>&2
- exit $EXIT_FAILURE
- fi
-
- # Read the libtool library.
- dlname=
- library_names=
-
- # If there is no directory component, then add one.
- case $file in
- */* | *\\*) . $file ;;
- *) . ./$file ;;
- esac
-
- # Skip this library if it cannot be dlopened.
- if test -z "$dlname"; then
- # Warn if it was a shared library.
- test -n "$library_names" && $echo "$modename: warning: \`$file' was not linked with \`-export-dynamic'"
- continue
- fi
-
- dir=`$echo "X$file" | $Xsed -e 's%/[^/]*$%%'`
- test "X$dir" = "X$file" && dir=.
-
- if test -f "$dir/$objdir/$dlname"; then
- dir="$dir/$objdir"
- else
- $echo "$modename: cannot find \`$dlname' in \`$dir' or \`$dir/$objdir'" 1>&2
- exit $EXIT_FAILURE
- fi
- ;;
-
- *.lo)
- # Just add the directory containing the .lo file.
- dir=`$echo "X$file" | $Xsed -e 's%/[^/]*$%%'`
- test "X$dir" = "X$file" && dir=.
- ;;
-
- *)
- $echo "$modename: warning \`-dlopen' is ignored for non-libtool libraries and objects" 1>&2
- continue
- ;;
- esac
-
- # Get the absolute pathname.
- absdir=`cd "$dir" && pwd`
- test -n "$absdir" && dir="$absdir"
-
- # Now add the directory to shlibpath_var.
- if eval "test -z \"\$$shlibpath_var\""; then
- eval "$shlibpath_var=\"\$dir\""
- else
- eval "$shlibpath_var=\"\$dir:\$$shlibpath_var\""
- fi
- done
-
- # This variable tells wrapper scripts just to set shlibpath_var
- # rather than running their programs.
- libtool_execute_magic="$magic"
-
- # Check if any of the arguments is a wrapper script.
- args=
- for file
- do
- case $file in
- -*) ;;
- *)
- # Do a test to see if this is really a libtool program.
- if (${SED} -e '4q' $file | grep "^# Generated by .*$PACKAGE") >/dev/null 2>&1; then
- # If there is no directory component, then add one.
- case $file in
- */* | *\\*) . $file ;;
- *) . ./$file ;;
- esac
-
- # Transform arg to wrapped name.
- file="$progdir/$program"
- fi
- ;;
- esac
- # Quote arguments (to preserve shell metacharacters).
- file=`$echo "X$file" | $Xsed -e "$sed_quote_subst"`
- args="$args \"$file\""
- done
-
- if test -z "$run"; then
- if test -n "$shlibpath_var"; then
- # Export the shlibpath_var.
- eval "export $shlibpath_var"
- fi
-
- # Restore saved environment variables
- if test "${save_LC_ALL+set}" = set; then
- LC_ALL="$save_LC_ALL"; export LC_ALL
- fi
- if test "${save_LANG+set}" = set; then
- LANG="$save_LANG"; export LANG
- fi
-
- # Now prepare to actually exec the command.
- exec_cmd="\$cmd$args"
- else
- # Display what would be done.
- if test -n "$shlibpath_var"; then
- eval "\$echo \"\$shlibpath_var=\$$shlibpath_var\""
- $echo "export $shlibpath_var"
- fi
- $echo "$cmd$args"
- exit $EXIT_SUCCESS
- fi
- ;;
-
- # libtool clean and uninstall mode
- clean | uninstall)
- modename="$modename: $mode"
- rm="$nonopt"
- files=
- rmforce=
- exit_status=0
-
- # This variable tells wrapper scripts just to set variables rather
- # than running their programs.
- libtool_install_magic="$magic"
-
- for arg
- do
- case $arg in
- -f) rm="$rm $arg"; rmforce=yes ;;
- -*) rm="$rm $arg" ;;
- *) files="$files $arg" ;;
- esac
- done
-
- if test -z "$rm"; then
- $echo "$modename: you must specify an RM program" 1>&2
- $echo "$help" 1>&2
- exit $EXIT_FAILURE
- fi
-
- rmdirs=
-
- origobjdir="$objdir"
- for file in $files; do
- dir=`$echo "X$file" | $Xsed -e 's%/[^/]*$%%'`
- if test "X$dir" = "X$file"; then
- dir=.
- objdir="$origobjdir"
- else
- objdir="$dir/$origobjdir"
- fi
- name=`$echo "X$file" | $Xsed -e 's%^.*/%%'`
- test "$mode" = uninstall && objdir="$dir"
-
- # Remember objdir for removal later, being careful to avoid duplicates
- if test "$mode" = clean; then
- case " $rmdirs " in
- *" $objdir "*) ;;
- *) rmdirs="$rmdirs $objdir" ;;
- esac
- fi
-
- # Don't error if the file doesn't exist and rm -f was used.
- if (test -L "$file") >/dev/null 2>&1 \
- || (test -h "$file") >/dev/null 2>&1 \
- || test -f "$file"; then
- :
- elif test -d "$file"; then
- exit_status=1
- continue
- elif test "$rmforce" = yes; then
- continue
- fi
-
- rmfiles="$file"
-
- case $name in
- *.la)
- # Possibly a libtool archive, so verify it.
- if (${SED} -e '2q' $file | grep "^# Generated by .*$PACKAGE") >/dev/null 2>&1; then
- . $dir/$name
-
- # Delete the libtool libraries and symlinks.
- for n in $library_names; do
- rmfiles="$rmfiles $objdir/$n"
- done
- test -n "$old_library" && rmfiles="$rmfiles $objdir/$old_library"
- test "$mode" = clean && rmfiles="$rmfiles $objdir/$name $objdir/${name}i"
-
- if test "$mode" = uninstall; then
- if test -n "$library_names"; then
- # Do each command in the postuninstall commands.
- cmds=$postuninstall_cmds
- save_ifs="$IFS"; IFS='~'
- for cmd in $cmds; do
- IFS="$save_ifs"
- eval cmd=\"$cmd\"
- $show "$cmd"
- $run eval "$cmd"
- if test "$?" -ne 0 && test "$rmforce" != yes; then
- exit_status=1
- fi
- done
- IFS="$save_ifs"
- fi
-
- if test -n "$old_library"; then
- # Do each command in the old_postuninstall commands.
- cmds=$old_postuninstall_cmds
- save_ifs="$IFS"; IFS='~'
- for cmd in $cmds; do
- IFS="$save_ifs"
- eval cmd=\"$cmd\"
- $show "$cmd"
- $run eval "$cmd"
- if test "$?" -ne 0 && test "$rmforce" != yes; then
- exit_status=1
- fi
- done
- IFS="$save_ifs"
- fi
- # FIXME: should reinstall the best remaining shared library.
- fi
- fi
- ;;
-
- *.lo)
- # Possibly a libtool object, so verify it.
- if (${SED} -e '2q' $file | grep "^# Generated by .*$PACKAGE") >/dev/null 2>&1; then
-
- # Read the .lo file
- . $dir/$name
-
- # Add PIC object to the list of files to remove.
- if test -n "$pic_object" \
- && test "$pic_object" != none; then
- rmfiles="$rmfiles $dir/$pic_object"
- fi
-
- # Add non-PIC object to the list of files to remove.
- if test -n "$non_pic_object" \
- && test "$non_pic_object" != none; then
- rmfiles="$rmfiles $dir/$non_pic_object"
- fi
- fi
- ;;
-
- *)
- if test "$mode" = clean ; then
- noexename=$name
- case $file in
- *.exe)
- file=`$echo $file|${SED} 's,.exe$,,'`
- noexename=`$echo $name|${SED} 's,.exe$,,'`
- # $file with .exe has already been added to rmfiles,
- # add $file without .exe
- rmfiles="$rmfiles $file"
- ;;
- esac
- # Do a test to see if this is a libtool program.
- if (${SED} -e '4q' $file | grep "^# Generated by .*$PACKAGE") >/dev/null 2>&1; then
- relink_command=
- . $dir/$noexename
-
- # note $name still contains .exe if it was in $file originally
- # as does the version of $file that was added into $rmfiles
- rmfiles="$rmfiles $objdir/$name $objdir/${name}S.${objext}"
- if test "$fast_install" = yes && test -n "$relink_command"; then
- rmfiles="$rmfiles $objdir/lt-$name"
- fi
- if test "X$noexename" != "X$name" ; then
- rmfiles="$rmfiles $objdir/lt-${noexename}.c"
- fi
- fi
- fi
- ;;
- esac
- $show "$rm $rmfiles"
- $run $rm $rmfiles || exit_status=1
- done
- objdir="$origobjdir"
-
- # Try to remove the ${objdir}s in the directories where we deleted files
- for dir in $rmdirs; do
- if test -d "$dir"; then
- $show "rmdir $dir"
- $run rmdir $dir >/dev/null 2>&1
- fi
- done
-
- exit $exit_status
- ;;
-
- "")
- $echo "$modename: you must specify a MODE" 1>&2
- $echo "$generic_help" 1>&2
- exit $EXIT_FAILURE
- ;;
- esac
-
- if test -z "$exec_cmd"; then
- $echo "$modename: invalid operation mode \`$mode'" 1>&2
- $echo "$generic_help" 1>&2
- exit $EXIT_FAILURE
- fi
-fi # test -z "$show_help"
-
-if test -n "$exec_cmd"; then
- eval exec $exec_cmd
- exit $EXIT_FAILURE
-fi
-
-# We need to display help for each of the modes.
-case $mode in
-"") $echo \
-"Usage: $modename [OPTION]... [MODE-ARG]...
-
-Provide generalized library-building support services.
-
- --config show all configuration variables
- --debug enable verbose shell tracing
--n, --dry-run display commands without modifying any files
- --features display basic configuration information and exit
- --finish same as \`--mode=finish'
- --help display this help message and exit
- --mode=MODE use operation mode MODE [default=inferred from MODE-ARGS]
- --quiet same as \`--silent'
- --silent don't print informational messages
- --tag=TAG use configuration variables from tag TAG
- --version print version information
-
-MODE must be one of the following:
-
- clean remove files from the build directory
- compile compile a source file into a libtool object
- execute automatically set library path, then run a program
- finish complete the installation of libtool libraries
- install install libraries or executables
- link create a library or an executable
- uninstall remove libraries from an installed directory
-
-MODE-ARGS vary depending on the MODE. Try \`$modename --help --mode=MODE' for
-a more detailed description of MODE.
-
-Report bugs to <bug-libtool@gnu.org>."
- exit $EXIT_SUCCESS
- ;;
-
-clean)
- $echo \
-"Usage: $modename [OPTION]... --mode=clean RM [RM-OPTION]... FILE...
-
-Remove files from the build directory.
-
-RM is the name of the program to use to delete files associated with each FILE
-(typically \`/bin/rm'). RM-OPTIONS are options (such as \`-f') to be passed
-to RM.
-
-If FILE is a libtool library, object or program, all the files associated
-with it are deleted. Otherwise, only FILE itself is deleted using RM."
- ;;
-
-compile)
- $echo \
-"Usage: $modename [OPTION]... --mode=compile COMPILE-COMMAND... SOURCEFILE
-
-Compile a source file into a libtool library object.
-
-This mode accepts the following additional options:
-
- -o OUTPUT-FILE set the output file name to OUTPUT-FILE
- -prefer-pic try to building PIC objects only
- -prefer-non-pic try to building non-PIC objects only
- -static always build a \`.o' file suitable for static linking
-
-COMPILE-COMMAND is a command to be used in creating a \`standard' object file
-from the given SOURCEFILE.
-
-The output file name is determined by removing the directory component from
-SOURCEFILE, then substituting the C source code suffix \`.c' with the
-library object suffix, \`.lo'."
- ;;
-
-execute)
- $echo \
-"Usage: $modename [OPTION]... --mode=execute COMMAND [ARGS]...
-
-Automatically set library path, then run a program.
-
-This mode accepts the following additional options:
-
- -dlopen FILE add the directory containing FILE to the library path
-
-This mode sets the library path environment variable according to \`-dlopen'
-flags.
-
-If any of the ARGS are libtool executable wrappers, then they are translated
-into their corresponding uninstalled binary, and any of their required library
-directories are added to the library path.
-
-Then, COMMAND is executed, with ARGS as arguments."
- ;;
-
-finish)
- $echo \
-"Usage: $modename [OPTION]... --mode=finish [LIBDIR]...
-
-Complete the installation of libtool libraries.
-
-Each LIBDIR is a directory that contains libtool libraries.
-
-The commands that this mode executes may require superuser privileges. Use
-the \`--dry-run' option if you just want to see what would be executed."
- ;;
-
-install)
- $echo \
-"Usage: $modename [OPTION]... --mode=install INSTALL-COMMAND...
-
-Install executables or libraries.
-
-INSTALL-COMMAND is the installation command. The first component should be
-either the \`install' or \`cp' program.
-
-The rest of the components are interpreted as arguments to that command (only
-BSD-compatible install options are recognized)."
- ;;
-
-link)
- $echo \
-"Usage: $modename [OPTION]... --mode=link LINK-COMMAND...
-
-Link object files or libraries together to form another library, or to
-create an executable program.
-
-LINK-COMMAND is a command using the C compiler that you would use to create
-a program from several object files.
-
-The following components of LINK-COMMAND are treated specially:
-
- -all-static do not do any dynamic linking at all
- -avoid-version do not add a version suffix if possible
- -dlopen FILE \`-dlpreopen' FILE if it cannot be dlopened at runtime
- -dlpreopen FILE link in FILE and add its symbols to lt_preloaded_symbols
- -export-dynamic allow symbols from OUTPUT-FILE to be resolved with dlsym(3)
- -export-symbols SYMFILE
- try to export only the symbols listed in SYMFILE
- -export-symbols-regex REGEX
- try to export only the symbols matching REGEX
- -LLIBDIR search LIBDIR for required installed libraries
- -lNAME OUTPUT-FILE requires the installed library libNAME
- -module build a library that can dlopened
- -no-fast-install disable the fast-install mode
- -no-install link a not-installable executable
- -no-undefined declare that a library does not refer to external symbols
- -o OUTPUT-FILE create OUTPUT-FILE from the specified objects
- -objectlist FILE Use a list of object files found in FILE to specify objects
- -precious-files-regex REGEX
- don't remove output files matching REGEX
- -release RELEASE specify package release information
- -rpath LIBDIR the created library will eventually be installed in LIBDIR
- -R[ ]LIBDIR add LIBDIR to the runtime path of programs and libraries
- -static do not do any dynamic linking of libtool libraries
- -version-info CURRENT[:REVISION[:AGE]]
- specify library version info [each variable defaults to 0]
-
-All other options (arguments beginning with \`-') are ignored.
-
-Every other argument is treated as a filename. Files ending in \`.la' are
-treated as uninstalled libtool libraries, other files are standard or library
-object files.
-
-If the OUTPUT-FILE ends in \`.la', then a libtool library is created,
-only library objects (\`.lo' files) may be specified, and \`-rpath' is
-required, except when creating a convenience library.
-
-If OUTPUT-FILE ends in \`.a' or \`.lib', then a standard library is created
-using \`ar' and \`ranlib', or on Windows using \`lib'.
-
-If OUTPUT-FILE ends in \`.lo' or \`.${objext}', then a reloadable object file
-is created, otherwise an executable program is created."
- ;;
-
-uninstall)
- $echo \
-"Usage: $modename [OPTION]... --mode=uninstall RM [RM-OPTION]... FILE...
-
-Remove libraries from an installation directory.
-
-RM is the name of the program to use to delete files associated with each FILE
-(typically \`/bin/rm'). RM-OPTIONS are options (such as \`-f') to be passed
-to RM.
-
-If FILE is a libtool library, all the files associated with it are deleted.
-Otherwise, only FILE itself is deleted using RM."
- ;;
-
-*)
- $echo "$modename: invalid operation mode \`$mode'" 1>&2
- $echo "$help" 1>&2
- exit $EXIT_FAILURE
- ;;
-esac
-
-$echo
-$echo "Try \`$modename --help' for more information about other modes."
-
-exit $?
-
-# The TAGs below are defined such that we never get into a situation
-# in which we disable both kinds of libraries. Given conflicting
-# choices, we go for a static library, that is the most portable,
-# since we can't tell whether shared libraries were disabled because
-# the user asked for that or because the platform doesn't support
-# them. This is particularly important on AIX, because we don't
-# support having both static and shared libraries enabled at the same
-# time on that platform, so we default to a shared-only configuration.
-# If a disable-shared tag is given, we'll fallback to a static-only
-# configuration. But we'll never go from static-only to shared-only.
-
-# ### BEGIN LIBTOOL TAG CONFIG: disable-shared
-build_libtool_libs=no
-build_old_libs=yes
-# ### END LIBTOOL TAG CONFIG: disable-shared
-
-# ### BEGIN LIBTOOL TAG CONFIG: disable-static
-build_old_libs=`case $build_libtool_libs in yes) $echo no;; *) $echo yes;; esac`
-# ### END LIBTOOL TAG CONFIG: disable-static
-
-# Local Variables:
-# mode:shell-script
-# sh-indentation:2
-# End:
diff --git a/Build/source/texk/web2c/luatexdir/zziplib/uses/missing b/Build/source/texk/web2c/luatexdir/zziplib/uses/missing
deleted file mode 100755
index 28055d2ae6f..00000000000
--- a/Build/source/texk/web2c/luatexdir/zziplib/uses/missing
+++ /dev/null
@@ -1,376 +0,0 @@
-#! /bin/sh
-# Common stub for a few missing GNU programs while installing.
-
-scriptversion=2009-04-28.21; # UTC
-
-# Copyright (C) 1996, 1997, 1999, 2000, 2002, 2003, 2004, 2005, 2006,
-# 2008, 2009 Free Software Foundation, Inc.
-# Originally by Fran,cois Pinard <pinard@iro.umontreal.ca>, 1996.
-
-# This program is free software; you can redistribute it and/or modify
-# it under the terms of the GNU General Public License as published by
-# the Free Software Foundation; either version 2, or (at your option)
-# any later version.
-
-# This program is distributed in the hope that it will be useful,
-# but WITHOUT ANY WARRANTY; without even the implied warranty of
-# MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
-# GNU General Public License for more details.
-
-# You should have received a copy of the GNU General Public License
-# along with this program. If not, see <http://www.gnu.org/licenses/>.
-
-# As a special exception to the GNU General Public License, if you
-# distribute this file as part of a program that contains a
-# configuration script generated by Autoconf, you may include it under
-# the same distribution terms that you use for the rest of that program.
-
-if test $# -eq 0; then
- echo 1>&2 "Try \`$0 --help' for more information"
- exit 1
-fi
-
-run=:
-sed_output='s/.* --output[ =]\([^ ]*\).*/\1/p'
-sed_minuso='s/.* -o \([^ ]*\).*/\1/p'
-
-# In the cases where this matters, `missing' is being run in the
-# srcdir already.
-if test -f configure.ac; then
- configure_ac=configure.ac
-else
- configure_ac=configure.in
-fi
-
-msg="missing on your system"
-
-case $1 in
---run)
- # Try to run requested program, and just exit if it succeeds.
- run=
- shift
- "$@" && exit 0
- # Exit code 63 means version mismatch. This often happens
- # when the user try to use an ancient version of a tool on
- # a file that requires a minimum version. In this case we
- # we should proceed has if the program had been absent, or
- # if --run hadn't been passed.
- if test $? = 63; then
- run=:
- msg="probably too old"
- fi
- ;;
-
- -h|--h|--he|--hel|--help)
- echo "\
-$0 [OPTION]... PROGRAM [ARGUMENT]...
-
-Handle \`PROGRAM [ARGUMENT]...' for when PROGRAM is missing, or return an
-error status if there is no known handling for PROGRAM.
-
-Options:
- -h, --help display this help and exit
- -v, --version output version information and exit
- --run try to run the given command, and emulate it if it fails
-
-Supported PROGRAM values:
- aclocal touch file \`aclocal.m4'
- autoconf touch file \`configure'
- autoheader touch file \`config.h.in'
- autom4te touch the output file, or create a stub one
- automake touch all \`Makefile.in' files
- bison create \`y.tab.[ch]', if possible, from existing .[ch]
- flex create \`lex.yy.c', if possible, from existing .c
- help2man touch the output file
- lex create \`lex.yy.c', if possible, from existing .c
- makeinfo touch the output file
- tar try tar, gnutar, gtar, then tar without non-portable flags
- yacc create \`y.tab.[ch]', if possible, from existing .[ch]
-
-Version suffixes to PROGRAM as well as the prefixes \`gnu-', \`gnu', and
-\`g' are ignored when checking the name.
-
-Send bug reports to <bug-automake@gnu.org>."
- exit $?
- ;;
-
- -v|--v|--ve|--ver|--vers|--versi|--versio|--version)
- echo "missing $scriptversion (GNU Automake)"
- exit $?
- ;;
-
- -*)
- echo 1>&2 "$0: Unknown \`$1' option"
- echo 1>&2 "Try \`$0 --help' for more information"
- exit 1
- ;;
-
-esac
-
-# normalize program name to check for.
-program=`echo "$1" | sed '
- s/^gnu-//; t
- s/^gnu//; t
- s/^g//; t'`
-
-# Now exit if we have it, but it failed. Also exit now if we
-# don't have it and --version was passed (most likely to detect
-# the program). This is about non-GNU programs, so use $1 not
-# $program.
-case $1 in
- lex*|yacc*)
- # Not GNU programs, they don't have --version.
- ;;
-
- tar*)
- if test -n "$run"; then
- echo 1>&2 "ERROR: \`tar' requires --run"
- exit 1
- elif test "x$2" = "x--version" || test "x$2" = "x--help"; then
- exit 1
- fi
- ;;
-
- *)
- if test -z "$run" && ($1 --version) > /dev/null 2>&1; then
- # We have it, but it failed.
- exit 1
- elif test "x$2" = "x--version" || test "x$2" = "x--help"; then
- # Could not run --version or --help. This is probably someone
- # running `$TOOL --version' or `$TOOL --help' to check whether
- # $TOOL exists and not knowing $TOOL uses missing.
- exit 1
- fi
- ;;
-esac
-
-# If it does not exist, or fails to run (possibly an outdated version),
-# try to emulate it.
-case $program in
- aclocal*)
- echo 1>&2 "\
-WARNING: \`$1' is $msg. You should only need it if
- you modified \`acinclude.m4' or \`${configure_ac}'. You might want
- to install the \`Automake' and \`Perl' packages. Grab them from
- any GNU archive site."
- touch aclocal.m4
- ;;
-
- autoconf*)
- echo 1>&2 "\
-WARNING: \`$1' is $msg. You should only need it if
- you modified \`${configure_ac}'. You might want to install the
- \`Autoconf' and \`GNU m4' packages. Grab them from any GNU
- archive site."
- touch configure
- ;;
-
- autoheader*)
- echo 1>&2 "\
-WARNING: \`$1' is $msg. You should only need it if
- you modified \`acconfig.h' or \`${configure_ac}'. You might want
- to install the \`Autoconf' and \`GNU m4' packages. Grab them
- from any GNU archive site."
- files=`sed -n 's/^[ ]*A[CM]_CONFIG_HEADER(\([^)]*\)).*/\1/p' ${configure_ac}`
- test -z "$files" && files="config.h"
- touch_files=
- for f in $files; do
- case $f in
- *:*) touch_files="$touch_files "`echo "$f" |
- sed -e 's/^[^:]*://' -e 's/:.*//'`;;
- *) touch_files="$touch_files $f.in";;
- esac
- done
- touch $touch_files
- ;;
-
- automake*)
- echo 1>&2 "\
-WARNING: \`$1' is $msg. You should only need it if
- you modified \`Makefile.am', \`acinclude.m4' or \`${configure_ac}'.
- You might want to install the \`Automake' and \`Perl' packages.
- Grab them from any GNU archive site."
- find . -type f -name Makefile.am -print |
- sed 's/\.am$/.in/' |
- while read f; do touch "$f"; done
- ;;
-
- autom4te*)
- echo 1>&2 "\
-WARNING: \`$1' is needed, but is $msg.
- You might have modified some files without having the
- proper tools for further handling them.
- You can get \`$1' as part of \`Autoconf' from any GNU
- archive site."
-
- file=`echo "$*" | sed -n "$sed_output"`
- test -z "$file" && file=`echo "$*" | sed -n "$sed_minuso"`
- if test -f "$file"; then
- touch $file
- else
- test -z "$file" || exec >$file
- echo "#! /bin/sh"
- echo "# Created by GNU Automake missing as a replacement of"
- echo "# $ $@"
- echo "exit 0"
- chmod +x $file
- exit 1
- fi
- ;;
-
- bison*|yacc*)
- echo 1>&2 "\
-WARNING: \`$1' $msg. You should only need it if
- you modified a \`.y' file. You may need the \`Bison' package
- in order for those modifications to take effect. You can get
- \`Bison' from any GNU archive site."
- rm -f y.tab.c y.tab.h
- if test $# -ne 1; then
- eval LASTARG="\${$#}"
- case $LASTARG in
- *.y)
- SRCFILE=`echo "$LASTARG" | sed 's/y$/c/'`
- if test -f "$SRCFILE"; then
- cp "$SRCFILE" y.tab.c
- fi
- SRCFILE=`echo "$LASTARG" | sed 's/y$/h/'`
- if test -f "$SRCFILE"; then
- cp "$SRCFILE" y.tab.h
- fi
- ;;
- esac
- fi
- if test ! -f y.tab.h; then
- echo >y.tab.h
- fi
- if test ! -f y.tab.c; then
- echo 'main() { return 0; }' >y.tab.c
- fi
- ;;
-
- lex*|flex*)
- echo 1>&2 "\
-WARNING: \`$1' is $msg. You should only need it if
- you modified a \`.l' file. You may need the \`Flex' package
- in order for those modifications to take effect. You can get
- \`Flex' from any GNU archive site."
- rm -f lex.yy.c
- if test $# -ne 1; then
- eval LASTARG="\${$#}"
- case $LASTARG in
- *.l)
- SRCFILE=`echo "$LASTARG" | sed 's/l$/c/'`
- if test -f "$SRCFILE"; then
- cp "$SRCFILE" lex.yy.c
- fi
- ;;
- esac
- fi
- if test ! -f lex.yy.c; then
- echo 'main() { return 0; }' >lex.yy.c
- fi
- ;;
-
- help2man*)
- echo 1>&2 "\
-WARNING: \`$1' is $msg. You should only need it if
- you modified a dependency of a manual page. You may need the
- \`Help2man' package in order for those modifications to take
- effect. You can get \`Help2man' from any GNU archive site."
-
- file=`echo "$*" | sed -n "$sed_output"`
- test -z "$file" && file=`echo "$*" | sed -n "$sed_minuso"`
- if test -f "$file"; then
- touch $file
- else
- test -z "$file" || exec >$file
- echo ".ab help2man is required to generate this page"
- exit $?
- fi
- ;;
-
- makeinfo*)
- echo 1>&2 "\
-WARNING: \`$1' is $msg. You should only need it if
- you modified a \`.texi' or \`.texinfo' file, or any other file
- indirectly affecting the aspect of the manual. The spurious
- call might also be the consequence of using a buggy \`make' (AIX,
- DU, IRIX). You might want to install the \`Texinfo' package or
- the \`GNU make' package. Grab either from any GNU archive site."
- # The file to touch is that specified with -o ...
- file=`echo "$*" | sed -n "$sed_output"`
- test -z "$file" && file=`echo "$*" | sed -n "$sed_minuso"`
- if test -z "$file"; then
- # ... or it is the one specified with @setfilename ...
- infile=`echo "$*" | sed 's/.* \([^ ]*\) *$/\1/'`
- file=`sed -n '
- /^@setfilename/{
- s/.* \([^ ]*\) *$/\1/
- p
- q
- }' $infile`
- # ... or it is derived from the source name (dir/f.texi becomes f.info)
- test -z "$file" && file=`echo "$infile" | sed 's,.*/,,;s,.[^.]*$,,'`.info
- fi
- # If the file does not exist, the user really needs makeinfo;
- # let's fail without touching anything.
- test -f $file || exit 1
- touch $file
- ;;
-
- tar*)
- shift
-
- # We have already tried tar in the generic part.
- # Look for gnutar/gtar before invocation to avoid ugly error
- # messages.
- if (gnutar --version > /dev/null 2>&1); then
- gnutar "$@" && exit 0
- fi
- if (gtar --version > /dev/null 2>&1); then
- gtar "$@" && exit 0
- fi
- firstarg="$1"
- if shift; then
- case $firstarg in
- *o*)
- firstarg=`echo "$firstarg" | sed s/o//`
- tar "$firstarg" "$@" && exit 0
- ;;
- esac
- case $firstarg in
- *h*)
- firstarg=`echo "$firstarg" | sed s/h//`
- tar "$firstarg" "$@" && exit 0
- ;;
- esac
- fi
-
- echo 1>&2 "\
-WARNING: I can't seem to be able to run \`tar' with the given arguments.
- You may want to install GNU tar or Free paxutils, or check the
- command line arguments."
- exit 1
- ;;
-
- *)
- echo 1>&2 "\
-WARNING: \`$1' is needed, and is $msg.
- You might have modified some files without having the
- proper tools for further handling them. Check the \`README' file,
- it often tells you about the needed prerequisites for installing
- this package. You may also peek at any GNU archive site, in case
- some other package would contain this missing \`$1' program."
- exit 1
- ;;
-esac
-
-exit 0
-
-# Local variables:
-# eval: (add-hook 'write-file-hooks 'time-stamp)
-# time-stamp-start: "scriptversion="
-# time-stamp-format: "%:y-%02m-%02d.%02H"
-# time-stamp-time-zone: "UTC"
-# time-stamp-end: "; # UTC"
-# End:
diff --git a/Build/source/texk/web2c/luatexdir/zziplib/uses/mkinstalldirs b/Build/source/texk/web2c/luatexdir/zziplib/uses/mkinstalldirs
deleted file mode 100755
index 4191a45dbd7..00000000000
--- a/Build/source/texk/web2c/luatexdir/zziplib/uses/mkinstalldirs
+++ /dev/null
@@ -1,162 +0,0 @@
-#! /bin/sh
-# mkinstalldirs --- make directory hierarchy
-
-scriptversion=2009-04-28.21; # UTC
-
-# Original author: Noah Friedman <friedman@prep.ai.mit.edu>
-# Created: 1993-05-16
-# Public domain.
-#
-# This file is maintained in Automake, please report
-# bugs to <bug-automake@gnu.org> or send patches to
-# <automake-patches@gnu.org>.
-
-nl='
-'
-IFS=" "" $nl"
-errstatus=0
-dirmode=
-
-usage="\
-Usage: mkinstalldirs [-h] [--help] [--version] [-m MODE] DIR ...
-
-Create each directory DIR (with mode MODE, if specified), including all
-leading file name components.
-
-Report bugs to <bug-automake@gnu.org>."
-
-# process command line arguments
-while test $# -gt 0 ; do
- case $1 in
- -h | --help | --h*) # -h for help
- echo "$usage"
- exit $?
- ;;
- -m) # -m PERM arg
- shift
- test $# -eq 0 && { echo "$usage" 1>&2; exit 1; }
- dirmode=$1
- shift
- ;;
- --version)
- echo "$0 $scriptversion"
- exit $?
- ;;
- --) # stop option processing
- shift
- break
- ;;
- -*) # unknown option
- echo "$usage" 1>&2
- exit 1
- ;;
- *) # first non-opt arg
- break
- ;;
- esac
-done
-
-for file
-do
- if test -d "$file"; then
- shift
- else
- break
- fi
-done
-
-case $# in
- 0) exit 0 ;;
-esac
-
-# Solaris 8's mkdir -p isn't thread-safe. If you mkdir -p a/b and
-# mkdir -p a/c at the same time, both will detect that a is missing,
-# one will create a, then the other will try to create a and die with
-# a "File exists" error. This is a problem when calling mkinstalldirs
-# from a parallel make. We use --version in the probe to restrict
-# ourselves to GNU mkdir, which is thread-safe.
-case $dirmode in
- '')
- if mkdir -p --version . >/dev/null 2>&1 && test ! -d ./--version; then
- echo "mkdir -p -- $*"
- exec mkdir -p -- "$@"
- else
- # On NextStep and OpenStep, the `mkdir' command does not
- # recognize any option. It will interpret all options as
- # directories to create, and then abort because `.' already
- # exists.
- test -d ./-p && rmdir ./-p
- test -d ./--version && rmdir ./--version
- fi
- ;;
- *)
- if mkdir -m "$dirmode" -p --version . >/dev/null 2>&1 &&
- test ! -d ./--version; then
- echo "mkdir -m $dirmode -p -- $*"
- exec mkdir -m "$dirmode" -p -- "$@"
- else
- # Clean up after NextStep and OpenStep mkdir.
- for d in ./-m ./-p ./--version "./$dirmode";
- do
- test -d $d && rmdir $d
- done
- fi
- ;;
-esac
-
-for file
-do
- case $file in
- /*) pathcomp=/ ;;
- *) pathcomp= ;;
- esac
- oIFS=$IFS
- IFS=/
- set fnord $file
- shift
- IFS=$oIFS
-
- for d
- do
- test "x$d" = x && continue
-
- pathcomp=$pathcomp$d
- case $pathcomp in
- -*) pathcomp=./$pathcomp ;;
- esac
-
- if test ! -d "$pathcomp"; then
- echo "mkdir $pathcomp"
-
- mkdir "$pathcomp" || lasterr=$?
-
- if test ! -d "$pathcomp"; then
- errstatus=$lasterr
- else
- if test ! -z "$dirmode"; then
- echo "chmod $dirmode $pathcomp"
- lasterr=
- chmod "$dirmode" "$pathcomp" || lasterr=$?
-
- if test ! -z "$lasterr"; then
- errstatus=$lasterr
- fi
- fi
- fi
- fi
-
- pathcomp=$pathcomp/
- done
-done
-
-exit $errstatus
-
-# Local Variables:
-# mode: shell-script
-# sh-indentation: 2
-# eval: (add-hook 'write-file-hooks 'time-stamp)
-# time-stamp-start: "scriptversion="
-# time-stamp-format: "%:y-%02m-%02d.%02H"
-# time-stamp-time-zone: "UTC"
-# time-stamp-end: "; # UTC"
-# End:
diff --git a/Build/source/texk/web2c/man/Makefile.in b/Build/source/texk/web2c/man/Makefile.in
index f7034095024..89823a55bb7 100644
--- a/Build/source/texk/web2c/man/Makefile.in
+++ b/Build/source/texk/web2c/man/Makefile.in
@@ -73,7 +73,7 @@ am__aclocal_m4_deps = $(top_srcdir)/../../m4/kpse-asm.m4 \
$(top_srcdir)/ac/web2c.ac $(top_srcdir)/configure.ac
am__configure_deps = $(am__aclocal_m4_deps) $(CONFIGURE_DEPENDENCIES) \
$(ACLOCAL_M4)
-mkinstalldirs = $(install_sh) -d
+mkinstalldirs = $(SHELL) $(top_srcdir)/../../build-aux/mkinstalldirs
CONFIG_HEADER = $(top_builddir)/c-auto.h $(top_builddir)/ff-config.h
CONFIG_CLEAN_FILES =
SOURCES =
diff --git a/Build/source/texk/web2c/mpware/Makefile.in b/Build/source/texk/web2c/mpware/Makefile.in
index b6872892133..5b1b411abe4 100644
--- a/Build/source/texk/web2c/mpware/Makefile.in
+++ b/Build/source/texk/web2c/mpware/Makefile.in
@@ -65,7 +65,7 @@ am__aclocal_m4_deps = $(top_srcdir)/../../m4/kpse-asm.m4 \
$(top_srcdir)/ac/web2c.ac $(top_srcdir)/configure.ac
am__configure_deps = $(am__aclocal_m4_deps) $(CONFIGURE_DEPENDENCIES) \
$(ACLOCAL_M4)
-mkinstalldirs = $(install_sh) -d
+mkinstalldirs = $(SHELL) $(top_srcdir)/../../build-aux/mkinstalldirs
CONFIG_HEADER = $(top_builddir)/c-auto.h $(top_builddir)/ff-config.h
CONFIG_CLEAN_FILES =
am__installdirs = "$(DESTDIR)$(bindir)"
diff --git a/Build/source/texk/web2c/omegafonts/Makefile.in b/Build/source/texk/web2c/omegafonts/Makefile.in
index f5b64c2aa03..603b1059ed3 100644
--- a/Build/source/texk/web2c/omegafonts/Makefile.in
+++ b/Build/source/texk/web2c/omegafonts/Makefile.in
@@ -64,7 +64,7 @@ am__aclocal_m4_deps = $(top_srcdir)/../../m4/kpse-asm.m4 \
$(top_srcdir)/ac/web2c.ac $(top_srcdir)/configure.ac
am__configure_deps = $(am__aclocal_m4_deps) $(CONFIGURE_DEPENDENCIES) \
$(ACLOCAL_M4)
-mkinstalldirs = $(install_sh) -d
+mkinstalldirs = $(SHELL) $(top_srcdir)/../../build-aux/mkinstalldirs
CONFIG_HEADER = $(top_builddir)/c-auto.h $(top_builddir)/ff-config.h
CONFIG_CLEAN_FILES =
am__installdirs = "$(DESTDIR)$(bindir)"
diff --git a/Build/source/texk/web2c/otps/Makefile.in b/Build/source/texk/web2c/otps/Makefile.in
index d6458c64b1d..4bbbe7eb148 100644
--- a/Build/source/texk/web2c/otps/Makefile.in
+++ b/Build/source/texk/web2c/otps/Makefile.in
@@ -67,7 +67,7 @@ am__aclocal_m4_deps = $(top_srcdir)/../../m4/kpse-asm.m4 \
$(top_srcdir)/ac/web2c.ac $(top_srcdir)/configure.ac
am__configure_deps = $(am__aclocal_m4_deps) $(CONFIGURE_DEPENDENCIES) \
$(ACLOCAL_M4)
-mkinstalldirs = $(install_sh) -d
+mkinstalldirs = $(SHELL) $(top_srcdir)/../../build-aux/mkinstalldirs
CONFIG_HEADER = $(top_builddir)/c-auto.h $(top_builddir)/ff-config.h
CONFIG_CLEAN_FILES =
am__installdirs = "$(DESTDIR)$(bindir)" "$(DESTDIR)$(bindir)"
diff --git a/Build/source/texk/web2c/web2c/Makefile.in b/Build/source/texk/web2c/web2c/Makefile.in
index 79128661144..b9f848e8325 100644
--- a/Build/source/texk/web2c/web2c/Makefile.in
+++ b/Build/source/texk/web2c/web2c/Makefile.in
@@ -46,12 +46,14 @@ DIST_COMMON = README $(am__configure_deps) $(dist_noinst_DATA) \
$(srcdir)/../../../build-aux/install-sh \
$(srcdir)/../../../build-aux/ltmain.sh \
$(srcdir)/../../../build-aux/missing \
+ $(srcdir)/../../../build-aux/mkinstalldirs \
$(srcdir)/../../../build-aux/ylwrap $(srcdir)/Makefile.am \
$(srcdir)/Makefile.in $(top_srcdir)/configure \
$(top_srcdir)/native/kpathsea/c-auto.in \
../../../build-aux/config.guess ../../../build-aux/config.sub \
../../../build-aux/depcomp ../../../build-aux/install-sh \
../../../build-aux/ltmain.sh ../../../build-aux/missing \
+ ../../../build-aux/mkinstalldirs \
../../../build-aux/texinfo.tex ../../../build-aux/ylwrap \
ChangeLog web2c-lexer.c web2c-parser.c web2c-parser.h
ACLOCAL_M4 = $(top_srcdir)/aclocal.m4
@@ -67,7 +69,8 @@ am__configure_deps = $(am__aclocal_m4_deps) $(CONFIGURE_DEPENDENCIES) \
$(ACLOCAL_M4)
am__CONFIG_DISTCLEAN_FILES = config.status config.cache config.log \
configure.lineno config.status.lineno
-mkinstalldirs = $(install_sh) -d
+mkinstalldirs = $(SHELL) \
+ $(top_srcdir)/../../../build-aux/mkinstalldirs
CONFIG_HEADER = $(top_builddir)/native/kpathsea/c-auto.h
CONFIG_CLEAN_FILES =
PROGRAMS = $(noinst_PROGRAMS)
diff --git a/Build/source/texk/web2c/window/Makefile.in b/Build/source/texk/web2c/window/Makefile.in
index 6c8c8a9bbb3..293f64183d3 100644
--- a/Build/source/texk/web2c/window/Makefile.in
+++ b/Build/source/texk/web2c/window/Makefile.in
@@ -64,7 +64,7 @@ am__aclocal_m4_deps = $(top_srcdir)/../../m4/kpse-asm.m4 \
$(top_srcdir)/ac/web2c.ac $(top_srcdir)/configure.ac
am__configure_deps = $(am__aclocal_m4_deps) $(CONFIGURE_DEPENDENCIES) \
$(ACLOCAL_M4)
-mkinstalldirs = $(install_sh) -d
+mkinstalldirs = $(SHELL) $(top_srcdir)/../../build-aux/mkinstalldirs
CONFIG_HEADER = $(top_builddir)/c-auto.h $(top_builddir)/ff-config.h
CONFIG_CLEAN_FILES =
ARFLAGS = cru
diff --git a/Build/source/texk/xdv2pdf/Makefile.in b/Build/source/texk/xdv2pdf/Makefile.in
index d16dba1c0e7..d547b053838 100644
--- a/Build/source/texk/xdv2pdf/Makefile.in
+++ b/Build/source/texk/xdv2pdf/Makefile.in
@@ -40,13 +40,14 @@ DIST_COMMON = $(am__configure_deps) \
$(srcdir)/../../build-aux/depcomp \
$(srcdir)/../../build-aux/install-sh \
$(srcdir)/../../build-aux/ltmain.sh \
- $(srcdir)/../../build-aux/missing $(srcdir)/Makefile.am \
+ $(srcdir)/../../build-aux/missing \
+ $(srcdir)/../../build-aux/mkinstalldirs $(srcdir)/Makefile.am \
$(srcdir)/Makefile.in $(srcdir)/config.h.in \
$(top_srcdir)/configure ../../build-aux/config.guess \
../../build-aux/config.sub ../../build-aux/depcomp \
../../build-aux/install-sh ../../build-aux/ltmain.sh \
- ../../build-aux/missing ../../build-aux/texinfo.tex \
- ../../build-aux/ylwrap ChangeLog
+ ../../build-aux/missing ../../build-aux/mkinstalldirs \
+ ../../build-aux/texinfo.tex ../../build-aux/ylwrap ChangeLog
ACLOCAL_M4 = $(top_srcdir)/aclocal.m4
am__aclocal_m4_deps = $(top_srcdir)/../../m4/kpse-common.m4 \
$(top_srcdir)/../../m4/kpse-kpathsea-flags.m4 \
@@ -61,7 +62,7 @@ am__configure_deps = $(am__aclocal_m4_deps) $(CONFIGURE_DEPENDENCIES) \
$(ACLOCAL_M4)
am__CONFIG_DISTCLEAN_FILES = config.status config.cache config.log \
configure.lineno config.status.lineno
-mkinstalldirs = $(install_sh) -d
+mkinstalldirs = $(SHELL) $(top_srcdir)/../../build-aux/mkinstalldirs
CONFIG_HEADER = config.h
CONFIG_CLEAN_FILES =
am__installdirs = "$(DESTDIR)$(bindir)"
diff --git a/Build/source/texk/xdvik/ChangeLog.TL b/Build/source/texk/xdvik/ChangeLog.TL
index d304e65ad97..724670dcd4e 100644
--- a/Build/source/texk/xdvik/ChangeLog.TL
+++ b/Build/source/texk/xdvik/ChangeLog.TL
@@ -1,12 +1,12 @@
ChangeLog.TL: Changes for xdvik (TeX Live)
==================================================
-2009-04-21 Peter Breitenlohner <peb@mppmu.mpg.de>
+2009-05-21 Peter Breitenlohner <peb@mppmu.mpg.de>
* CHANGES: fixed version/relase-date such that mksedscript can
extract them.
-2009-04-88 Peter Breitenlohner <peb@mppmu.mpg.de>
+2009-04-28 Peter Breitenlohner <peb@mppmu.mpg.de>
* xdvi.h: guard typedef of iconv_char_pptrT by '#if HAVE_ICONV_H'.
diff --git a/Build/source/texk/xdvik/ac/withenable.ac b/Build/source/texk/xdvik/ac/withenable.ac
index cefdcc4f609..842b417bdaa 100644
--- a/Build/source/texk/xdvik/ac/withenable.ac
+++ b/Build/source/texk/xdvik/ac/withenable.ac
@@ -3,6 +3,8 @@ dnl
dnl Copyright (C) 2009 Peter Breitenlohner <tex-live@tug.org>
dnl You may freely use, modify and/or distribute this file.
dnl
+dnl extra_dirs = texk/xdvik/squeeze
+dnl
## configure options and TL libraries required for xdvik
KPSE_ENABLE_PROG([xdvik], [kpathsea t1lib])
m4_include(kpse_TL[texk/xdvik/ac/xdvik.ac])
diff --git a/Build/source/texk/xdvik/squeeze/Makefile.in b/Build/source/texk/xdvik/squeeze/Makefile.in
index c6a79ae39d8..32ed21e39dd 100644
--- a/Build/source/texk/xdvik/squeeze/Makefile.in
+++ b/Build/source/texk/xdvik/squeeze/Makefile.in
@@ -36,11 +36,13 @@ subdir = .
DIST_COMMON = $(am__configure_deps) \
$(srcdir)/../../../build-aux/depcomp \
$(srcdir)/../../../build-aux/install-sh \
- $(srcdir)/../../../build-aux/missing $(srcdir)/Makefile.am \
- $(srcdir)/Makefile.in $(top_srcdir)/configure \
- ../../../build-aux/config.guess ../../../build-aux/config.sub \
- ../../../build-aux/depcomp ../../../build-aux/install-sh \
- ../../../build-aux/ltmain.sh ../../../build-aux/missing \
+ $(srcdir)/../../../build-aux/missing \
+ $(srcdir)/../../../build-aux/mkinstalldirs \
+ $(srcdir)/Makefile.am $(srcdir)/Makefile.in \
+ $(top_srcdir)/configure ../../../build-aux/config.guess \
+ ../../../build-aux/config.sub ../../../build-aux/depcomp \
+ ../../../build-aux/install-sh ../../../build-aux/ltmain.sh \
+ ../../../build-aux/missing ../../../build-aux/mkinstalldirs \
../../../build-aux/texinfo.tex ../../../build-aux/ylwrap
ACLOCAL_M4 = $(top_srcdir)/aclocal.m4
am__aclocal_m4_deps = $(top_srcdir)/configure.ac
@@ -48,7 +50,8 @@ am__configure_deps = $(am__aclocal_m4_deps) $(CONFIGURE_DEPENDENCIES) \
$(ACLOCAL_M4)
am__CONFIG_DISTCLEAN_FILES = config.status config.cache config.log \
configure.lineno config.status.lineno
-mkinstalldirs = $(install_sh) -d
+mkinstalldirs = $(SHELL) \
+ $(top_srcdir)/../../../build-aux/mkinstalldirs
CONFIG_CLEAN_FILES =
PROGRAMS = $(noinst_PROGRAMS)
squeeze_SOURCES = squeeze.c
diff --git a/Build/source/texk/xdvipdfmx/Makefile.in b/Build/source/texk/xdvipdfmx/Makefile.in
index 2a7471efae6..186e70d6caf 100644
--- a/Build/source/texk/xdvipdfmx/Makefile.in
+++ b/Build/source/texk/xdvipdfmx/Makefile.in
@@ -37,14 +37,15 @@ DIST_COMMON = README $(am__configure_deps) \
$(srcdir)/../../build-aux/config.sub \
$(srcdir)/../../build-aux/install-sh \
$(srcdir)/../../build-aux/ltmain.sh \
- $(srcdir)/../../build-aux/missing $(srcdir)/Makefile.am \
+ $(srcdir)/../../build-aux/missing \
+ $(srcdir)/../../build-aux/mkinstalldirs $(srcdir)/Makefile.am \
$(srcdir)/Makefile.in $(srcdir)/config.h.in \
$(top_srcdir)/configure ../../build-aux/config.guess \
../../build-aux/config.sub ../../build-aux/depcomp \
../../build-aux/install-sh ../../build-aux/ltmain.sh \
- ../../build-aux/missing ../../build-aux/texinfo.tex \
- ../../build-aux/ylwrap AUTHORS COPYING ChangeLog INSTALL NEWS \
- TODO
+ ../../build-aux/missing ../../build-aux/mkinstalldirs \
+ ../../build-aux/texinfo.tex ../../build-aux/ylwrap AUTHORS \
+ COPYING ChangeLog INSTALL NEWS TODO
ACLOCAL_M4 = $(top_srcdir)/aclocal.m4
am__aclocal_m4_deps = $(top_srcdir)/../../m4/cho-kpse.m4 \
$(top_srcdir)/../../m4/cho-libs.m4 \
@@ -64,7 +65,7 @@ am__configure_deps = $(am__aclocal_m4_deps) $(CONFIGURE_DEPENDENCIES) \
$(ACLOCAL_M4)
am__CONFIG_DISTCLEAN_FILES = config.status config.cache config.log \
configure.lineno config.status.lineno
-mkinstalldirs = $(install_sh) -d
+mkinstalldirs = $(SHELL) $(top_srcdir)/../../build-aux/mkinstalldirs
CONFIG_HEADER = config.h
CONFIG_CLEAN_FILES =
SOURCES =
diff --git a/Build/source/texk/xdvipdfmx/src/Makefile.in b/Build/source/texk/xdvipdfmx/src/Makefile.in
index 24b43bf29fa..2e54ec33285 100644
--- a/Build/source/texk/xdvipdfmx/src/Makefile.in
+++ b/Build/source/texk/xdvipdfmx/src/Makefile.in
@@ -52,7 +52,7 @@ am__aclocal_m4_deps = $(top_srcdir)/../../m4/cho-kpse.m4 \
$(top_srcdir)/../../m4/maw-time.m4 $(top_srcdir)/configure.ac
am__configure_deps = $(am__aclocal_m4_deps) $(CONFIGURE_DEPENDENCIES) \
$(ACLOCAL_M4)
-mkinstalldirs = $(install_sh) -d
+mkinstalldirs = $(SHELL) $(top_srcdir)/../../build-aux/mkinstalldirs
CONFIG_HEADER = $(top_builddir)/config.h
CONFIG_CLEAN_FILES =
am__installdirs = "$(DESTDIR)$(bindir)"
diff --git a/Build/source/utils/Makefile.in b/Build/source/utils/Makefile.in
index f9edecacc1a..d22d9e9a300 100644
--- a/Build/source/utils/Makefile.in
+++ b/Build/source/utils/Makefile.in
@@ -37,12 +37,14 @@ DIST_COMMON = README $(am__configure_deps) \
$(srcdir)/../build-aux/config.guess \
$(srcdir)/../build-aux/config.sub \
$(srcdir)/../build-aux/install-sh \
- $(srcdir)/../build-aux/missing $(srcdir)/Makefile.am \
+ $(srcdir)/../build-aux/missing \
+ $(srcdir)/../build-aux/mkinstalldirs $(srcdir)/Makefile.am \
$(srcdir)/Makefile.in $(top_srcdir)/configure \
../build-aux/config.guess ../build-aux/config.sub \
../build-aux/depcomp ../build-aux/install-sh \
../build-aux/ltmain.sh ../build-aux/missing \
- ../build-aux/texinfo.tex ../build-aux/ylwrap
+ ../build-aux/mkinstalldirs ../build-aux/texinfo.tex \
+ ../build-aux/ylwrap
ACLOCAL_M4 = $(top_srcdir)/aclocal.m4
am__aclocal_m4_deps = $(top_srcdir)/../m4/kpse-common.m4 \
$(top_srcdir)/../m4/kpse-cxx-hack.m4 \
@@ -60,8 +62,6 @@ am__aclocal_m4_deps = $(top_srcdir)/../m4/kpse-common.m4 \
$(top_srcdir)/../m4/kpse-web2c.m4 \
$(top_srcdir)/../m4/kpse-xpdf-flags.m4 \
$(top_srcdir)/../m4/kpse-zlib-flags.m4 \
- $(top_srcdir)/../ac/withenable.ac \
- $(top_srcdir)/../utils/ac/withenable.ac \
$(top_srcdir)/../utils/dialog/ac/withenable.ac \
$(top_srcdir)/../utils/pdfopen/ac/withenable.ac \
$(top_srcdir)/../utils/ps2eps/ac/withenable.ac \
@@ -71,7 +71,6 @@ am__aclocal_m4_deps = $(top_srcdir)/../m4/kpse-common.m4 \
$(top_srcdir)/../utils/vlna/ac/withenable.ac \
$(top_srcdir)/../utils/xindy/ac/withenable.ac \
$(top_srcdir)/../utils/xindy/ac/xindy.ac \
- $(top_srcdir)/../texk/ac/withenable.ac \
$(top_srcdir)/../texk/web2c/ac/withenable.ac \
$(top_srcdir)/../texk/web2c/ac/web2c.ac \
$(top_srcdir)/../texk/afm2pl/ac/withenable.ac \
@@ -108,7 +107,6 @@ am__aclocal_m4_deps = $(top_srcdir)/../m4/kpse-common.m4 \
$(top_srcdir)/../texk/texlive/ac/withenable.ac \
$(top_srcdir)/../texk/kpathsea/ac/withenable.ac \
$(top_srcdir)/../texk/kpathsea/ac/web2c.ac \
- $(top_srcdir)/../libs/ac/withenable.ac \
$(top_srcdir)/../libs/icu/ac/withenable.ac \
$(top_srcdir)/../libs/teckit/ac/withenable.ac \
$(top_srcdir)/../libs/graphite/ac/withenable.ac \
@@ -125,7 +123,7 @@ am__configure_deps = $(am__aclocal_m4_deps) $(CONFIGURE_DEPENDENCIES) \
$(ACLOCAL_M4)
am__CONFIG_DISTCLEAN_FILES = config.status config.cache config.log \
configure.lineno config.status.lineno
-mkinstalldirs = $(install_sh) -d
+mkinstalldirs = $(SHELL) $(top_srcdir)/../build-aux/mkinstalldirs
CONFIG_CLEAN_FILES =
SOURCES =
DIST_SOURCES =
diff --git a/Build/source/utils/ac/withenable.ac b/Build/source/utils/ac/withenable.ac
deleted file mode 100644
index 67fde171126..00000000000
--- a/Build/source/utils/ac/withenable.ac
+++ /dev/null
@@ -1,4 +0,0 @@
-## utils/ac/withenable.ac: configure.ac fragment for the TeX Live subdirectory utils/
-dnl
-dnl Copyright (C) 2009 Peter Breitenlohner <tex-live@tug.org>
-dnl You may freely use, modify and/or distribute this file.
diff --git a/Build/source/utils/configure b/Build/source/utils/configure
index 4b11578b530..960494aa819 100755
--- a/Build/source/utils/configure
+++ b/Build/source/utils/configure
@@ -2215,10 +2215,6 @@ fi
-## ac/withenable.ac: configure.ac fragment for the TeX Live top-level
-
-## utils/ac/withenable.ac: configure.ac fragment for the TeX Live subdirectory utils/
-
## utils/dialog/ac/withenable.ac: configure.ac fragment for the TeX Live subdirectory utils/dialog/
## configure options and TL libraries required for dialog
# Check whether --enable-dialog was given.
@@ -2356,8 +2352,6 @@ fi
-## texk/ac/withenable.ac: configure.ac fragment for the TeX Live subdirectory texk/
-
## texk/web2c/ac/withenable.ac: configure.ac fragment for the TeX Live subdirectory texk/web2c/
## configure options and TL libraries required for web2c
# Check whether --enable-web2c was given.
@@ -3248,8 +3242,6 @@ case $enable_mktextex_default in
esac
-## libs/ac/withenable.ac: configure.ac fragment for the TeX Live subdirectory libs/
-
## libs/icu/ac/withenable.ac: configure.ac fragment for the TeX Live subdirectory libs/icu/
## configure options and TL libraries required for icu (modified for XeTeX)
diff --git a/Build/source/utils/dialog/Makefile.in b/Build/source/utils/dialog/Makefile.in
index 2e2e9cfdbcb..fcac3230dbf 100644
--- a/Build/source/utils/dialog/Makefile.in
+++ b/Build/source/utils/dialog/Makefile.in
@@ -34,19 +34,21 @@ POST_UNINSTALL = :
subdir = .
DIST_COMMON = $(am__configure_deps) \
$(srcdir)/../../build-aux/install-sh \
- $(srcdir)/../../build-aux/missing $(srcdir)/Makefile.am \
+ $(srcdir)/../../build-aux/missing \
+ $(srcdir)/../../build-aux/mkinstalldirs $(srcdir)/Makefile.am \
$(srcdir)/Makefile.in $(top_srcdir)/configure \
../../build-aux/config.guess ../../build-aux/config.sub \
../../build-aux/depcomp ../../build-aux/install-sh \
../../build-aux/ltmain.sh ../../build-aux/missing \
- ../../build-aux/texinfo.tex ../../build-aux/ylwrap
+ ../../build-aux/mkinstalldirs ../../build-aux/texinfo.tex \
+ ../../build-aux/ylwrap
ACLOCAL_M4 = $(top_srcdir)/aclocal.m4
am__aclocal_m4_deps = $(top_srcdir)/configure.ac
am__configure_deps = $(am__aclocal_m4_deps) $(CONFIGURE_DEPENDENCIES) \
$(ACLOCAL_M4)
am__CONFIG_DISTCLEAN_FILES = config.status config.cache config.log \
configure.lineno config.status.lineno
-mkinstalldirs = $(install_sh) -d
+mkinstalldirs = $(SHELL) $(top_srcdir)/../../build-aux/mkinstalldirs
CONFIG_CLEAN_FILES =
am__installdirs = "$(DESTDIR)$(bindir)" "$(DESTDIR)$(man1dir)"
binPROGRAMS_INSTALL = $(INSTALL_PROGRAM)
diff --git a/Build/source/utils/dummy/Makefile.in b/Build/source/utils/dummy/Makefile.in
index 21d9f0bd9cc..d7c84c537a6 100644
--- a/Build/source/utils/dummy/Makefile.in
+++ b/Build/source/utils/dummy/Makefile.in
@@ -33,19 +33,21 @@ POST_UNINSTALL = :
subdir = .
DIST_COMMON = README $(am__configure_deps) \
$(srcdir)/../../build-aux/install-sh \
- $(srcdir)/../../build-aux/missing $(srcdir)/Makefile.am \
+ $(srcdir)/../../build-aux/missing \
+ $(srcdir)/../../build-aux/mkinstalldirs $(srcdir)/Makefile.am \
$(srcdir)/Makefile.in $(top_srcdir)/configure \
../../build-aux/config.guess ../../build-aux/config.sub \
../../build-aux/depcomp ../../build-aux/install-sh \
../../build-aux/ltmain.sh ../../build-aux/missing \
- ../../build-aux/texinfo.tex ../../build-aux/ylwrap
+ ../../build-aux/mkinstalldirs ../../build-aux/texinfo.tex \
+ ../../build-aux/ylwrap
ACLOCAL_M4 = $(top_srcdir)/aclocal.m4
am__aclocal_m4_deps = $(top_srcdir)/configure.ac
am__configure_deps = $(am__aclocal_m4_deps) $(CONFIGURE_DEPENDENCIES) \
$(ACLOCAL_M4)
am__CONFIG_DISTCLEAN_FILES = config.status config.cache config.log \
configure.lineno config.status.lineno
-mkinstalldirs = $(install_sh) -d
+mkinstalldirs = $(SHELL) $(top_srcdir)/../../build-aux/mkinstalldirs
CONFIG_CLEAN_FILES =
SOURCES =
DIST_SOURCES =
diff --git a/Build/source/utils/pdfopen/Makefile.in b/Build/source/utils/pdfopen/Makefile.in
index 03da088888d..0c780c1c24a 100644
--- a/Build/source/utils/pdfopen/Makefile.in
+++ b/Build/source/utils/pdfopen/Makefile.in
@@ -35,19 +35,21 @@ subdir = .
DIST_COMMON = README $(am__configure_deps) \
$(srcdir)/../../build-aux/depcomp \
$(srcdir)/../../build-aux/install-sh \
- $(srcdir)/../../build-aux/missing $(srcdir)/Makefile.am \
+ $(srcdir)/../../build-aux/missing \
+ $(srcdir)/../../build-aux/mkinstalldirs $(srcdir)/Makefile.am \
$(srcdir)/Makefile.in $(top_srcdir)/configure \
../../build-aux/config.guess ../../build-aux/config.sub \
../../build-aux/depcomp ../../build-aux/install-sh \
../../build-aux/ltmain.sh ../../build-aux/missing \
- ../../build-aux/texinfo.tex ../../build-aux/ylwrap ChangeLog
+ ../../build-aux/mkinstalldirs ../../build-aux/texinfo.tex \
+ ../../build-aux/ylwrap ChangeLog
ACLOCAL_M4 = $(top_srcdir)/aclocal.m4
am__aclocal_m4_deps = $(top_srcdir)/configure.ac
am__configure_deps = $(am__aclocal_m4_deps) $(CONFIGURE_DEPENDENCIES) \
$(ACLOCAL_M4)
am__CONFIG_DISTCLEAN_FILES = config.status config.cache config.log \
configure.lineno config.status.lineno
-mkinstalldirs = $(install_sh) -d
+mkinstalldirs = $(SHELL) $(top_srcdir)/../../build-aux/mkinstalldirs
CONFIG_CLEAN_FILES =
am__installdirs = "$(DESTDIR)$(bindir)"
binPROGRAMS_INSTALL = $(INSTALL_PROGRAM)
diff --git a/Build/source/utils/ps2eps/Makefile.in b/Build/source/utils/ps2eps/Makefile.in
index e53d38b1ee7..30aa0a10c4a 100644
--- a/Build/source/utils/ps2eps/Makefile.in
+++ b/Build/source/utils/ps2eps/Makefile.in
@@ -36,19 +36,21 @@ subdir = .
DIST_COMMON = $(am__configure_deps) $(dist_bin_SCRIPTS) \
$(dist_man1_MANS) $(srcdir)/../../build-aux/depcomp \
$(srcdir)/../../build-aux/install-sh \
- $(srcdir)/../../build-aux/missing $(srcdir)/Makefile.am \
+ $(srcdir)/../../build-aux/missing \
+ $(srcdir)/../../build-aux/mkinstalldirs $(srcdir)/Makefile.am \
$(srcdir)/Makefile.in $(top_srcdir)/configure \
../../build-aux/config.guess ../../build-aux/config.sub \
../../build-aux/depcomp ../../build-aux/install-sh \
../../build-aux/ltmain.sh ../../build-aux/missing \
- ../../build-aux/texinfo.tex ../../build-aux/ylwrap ChangeLog
+ ../../build-aux/mkinstalldirs ../../build-aux/texinfo.tex \
+ ../../build-aux/ylwrap ChangeLog
ACLOCAL_M4 = $(top_srcdir)/aclocal.m4
am__aclocal_m4_deps = $(top_srcdir)/configure.ac
am__configure_deps = $(am__aclocal_m4_deps) $(CONFIGURE_DEPENDENCIES) \
$(ACLOCAL_M4)
am__CONFIG_DISTCLEAN_FILES = config.status config.cache config.log \
configure.lineno config.status.lineno
-mkinstalldirs = $(install_sh) -d
+mkinstalldirs = $(SHELL) $(top_srcdir)/../../build-aux/mkinstalldirs
CONFIG_CLEAN_FILES =
am__installdirs = "$(DESTDIR)$(bindir)" "$(DESTDIR)$(bindir)" \
"$(DESTDIR)$(man1dir)"
diff --git a/Build/source/utils/psutils/Makefile.in b/Build/source/utils/psutils/Makefile.in
index 64ba0b8babd..ad50cb74073 100644
--- a/Build/source/utils/psutils/Makefile.in
+++ b/Build/source/utils/psutils/Makefile.in
@@ -37,20 +37,21 @@ subdir = .
DIST_COMMON = README $(am__configure_deps) $(dist_man1_MANS) \
$(srcdir)/../../build-aux/depcomp \
$(srcdir)/../../build-aux/install-sh \
- $(srcdir)/../../build-aux/missing $(srcdir)/Makefile.am \
+ $(srcdir)/../../build-aux/missing \
+ $(srcdir)/../../build-aux/mkinstalldirs $(srcdir)/Makefile.am \
$(srcdir)/Makefile.in $(srcdir)/patchlev.h.in \
$(top_srcdir)/configure ../../build-aux/config.guess \
../../build-aux/config.sub ../../build-aux/depcomp \
../../build-aux/install-sh ../../build-aux/ltmain.sh \
- ../../build-aux/missing ../../build-aux/texinfo.tex \
- ../../build-aux/ylwrap ChangeLog
+ ../../build-aux/missing ../../build-aux/mkinstalldirs \
+ ../../build-aux/texinfo.tex ../../build-aux/ylwrap ChangeLog
ACLOCAL_M4 = $(top_srcdir)/aclocal.m4
am__aclocal_m4_deps = $(top_srcdir)/configure.ac
am__configure_deps = $(am__aclocal_m4_deps) $(CONFIGURE_DEPENDENCIES) \
$(ACLOCAL_M4)
am__CONFIG_DISTCLEAN_FILES = config.status config.cache config.log \
configure.lineno config.status.lineno
-mkinstalldirs = $(install_sh) -d
+mkinstalldirs = $(SHELL) $(top_srcdir)/../../build-aux/mkinstalldirs
CONFIG_CLEAN_FILES = patchlev.h
am__installdirs = "$(DESTDIR)$(bindir)" "$(DESTDIR)$(bindir)" \
"$(DESTDIR)$(man1dir)"
diff --git a/Build/source/utils/t1utils/Makefile.in b/Build/source/utils/t1utils/Makefile.in
index 492a171d310..1e23efa0c3b 100644
--- a/Build/source/utils/t1utils/Makefile.in
+++ b/Build/source/utils/t1utils/Makefile.in
@@ -36,20 +36,22 @@ subdir = .
DIST_COMMON = README $(am__configure_deps) \
$(srcdir)/../../build-aux/depcomp \
$(srcdir)/../../build-aux/install-sh \
- $(srcdir)/../../build-aux/missing $(srcdir)/Makefile.am \
+ $(srcdir)/../../build-aux/missing \
+ $(srcdir)/../../build-aux/mkinstalldirs $(srcdir)/Makefile.am \
$(srcdir)/Makefile.in $(srcdir)/config.h.in \
$(top_srcdir)/configure ../../build-aux/config.guess \
../../build-aux/config.sub ../../build-aux/depcomp \
../../build-aux/install-sh ../../build-aux/ltmain.sh \
- ../../build-aux/missing ../../build-aux/texinfo.tex \
- ../../build-aux/ylwrap ChangeLog INSTALL NEWS strerror.c
+ ../../build-aux/missing ../../build-aux/mkinstalldirs \
+ ../../build-aux/texinfo.tex ../../build-aux/ylwrap ChangeLog \
+ INSTALL NEWS strerror.c
ACLOCAL_M4 = $(top_srcdir)/aclocal.m4
am__aclocal_m4_deps = $(top_srcdir)/configure.ac
am__configure_deps = $(am__aclocal_m4_deps) $(CONFIGURE_DEPENDENCIES) \
$(ACLOCAL_M4)
am__CONFIG_DISTCLEAN_FILES = config.status config.cache config.log \
configure.lineno config.status.lineno
-mkinstalldirs = $(install_sh) -d
+mkinstalldirs = $(SHELL) $(top_srcdir)/../../build-aux/mkinstalldirs
CONFIG_HEADER = config.h
CONFIG_CLEAN_FILES =
am__installdirs = "$(DESTDIR)$(bindir)" "$(DESTDIR)$(man1dir)"
diff --git a/Build/source/utils/tpic2pdftex/Makefile.in b/Build/source/utils/tpic2pdftex/Makefile.in
index 3297bef2e3e..0cd182a85dd 100644
--- a/Build/source/utils/tpic2pdftex/Makefile.in
+++ b/Build/source/utils/tpic2pdftex/Makefile.in
@@ -34,19 +34,21 @@ subdir = .
DIST_COMMON = $(am__configure_deps) $(dist_bin_SCRIPTS) \
$(dist_check_SCRIPTS) $(dist_man1_MANS) \
$(srcdir)/../../build-aux/install-sh \
- $(srcdir)/../../build-aux/missing $(srcdir)/Makefile.am \
+ $(srcdir)/../../build-aux/missing \
+ $(srcdir)/../../build-aux/mkinstalldirs $(srcdir)/Makefile.am \
$(srcdir)/Makefile.in $(top_srcdir)/configure \
../../build-aux/config.guess ../../build-aux/config.sub \
../../build-aux/depcomp ../../build-aux/install-sh \
../../build-aux/ltmain.sh ../../build-aux/missing \
- ../../build-aux/texinfo.tex ../../build-aux/ylwrap ChangeLog
+ ../../build-aux/mkinstalldirs ../../build-aux/texinfo.tex \
+ ../../build-aux/ylwrap ChangeLog
ACLOCAL_M4 = $(top_srcdir)/aclocal.m4
am__aclocal_m4_deps = $(top_srcdir)/configure.ac
am__configure_deps = $(am__aclocal_m4_deps) $(CONFIGURE_DEPENDENCIES) \
$(ACLOCAL_M4)
am__CONFIG_DISTCLEAN_FILES = config.status config.cache config.log \
configure.lineno config.status.lineno
-mkinstalldirs = $(install_sh) -d
+mkinstalldirs = $(SHELL) $(top_srcdir)/../../build-aux/mkinstalldirs
CONFIG_CLEAN_FILES =
am__installdirs = "$(DESTDIR)$(bindir)" "$(DESTDIR)$(man1dir)"
dist_binSCRIPT_INSTALL = $(INSTALL_SCRIPT)
diff --git a/Build/source/utils/vlna/Makefile.in b/Build/source/utils/vlna/Makefile.in
index 5a58ca517c9..5990c85748e 100644
--- a/Build/source/utils/vlna/Makefile.in
+++ b/Build/source/utils/vlna/Makefile.in
@@ -35,19 +35,21 @@ subdir = .
DIST_COMMON = README $(am__configure_deps) $(dist_man1_MANS) \
$(srcdir)/../../build-aux/depcomp \
$(srcdir)/../../build-aux/install-sh \
- $(srcdir)/../../build-aux/missing $(srcdir)/Makefile.am \
+ $(srcdir)/../../build-aux/missing \
+ $(srcdir)/../../build-aux/mkinstalldirs $(srcdir)/Makefile.am \
$(srcdir)/Makefile.in $(top_srcdir)/configure \
../../build-aux/config.guess ../../build-aux/config.sub \
../../build-aux/depcomp ../../build-aux/install-sh \
../../build-aux/ltmain.sh ../../build-aux/missing \
- ../../build-aux/texinfo.tex ../../build-aux/ylwrap ChangeLog
+ ../../build-aux/mkinstalldirs ../../build-aux/texinfo.tex \
+ ../../build-aux/ylwrap ChangeLog
ACLOCAL_M4 = $(top_srcdir)/aclocal.m4
am__aclocal_m4_deps = $(top_srcdir)/configure.ac
am__configure_deps = $(am__aclocal_m4_deps) $(CONFIGURE_DEPENDENCIES) \
$(ACLOCAL_M4)
am__CONFIG_DISTCLEAN_FILES = config.status config.cache config.log \
configure.lineno config.status.lineno
-mkinstalldirs = $(install_sh) -d
+mkinstalldirs = $(SHELL) $(top_srcdir)/../../build-aux/mkinstalldirs
CONFIG_CLEAN_FILES =
am__installdirs = "$(DESTDIR)$(bindir)" "$(DESTDIR)$(man1dir)"
binPROGRAMS_INSTALL = $(INSTALL_PROGRAM)
diff --git a/Build/source/utils/xindy/Makefile.in b/Build/source/utils/xindy/Makefile.in
index 8113a9dd774..ee0092290ac 100644
--- a/Build/source/utils/xindy/Makefile.in
+++ b/Build/source/utils/xindy/Makefile.in
@@ -39,13 +39,14 @@ DIST_COMMON = $(am__configure_deps) \
$(srcdir)/../../build-aux/config.guess \
$(srcdir)/../../build-aux/config.sub \
$(srcdir)/../../build-aux/install-sh \
- $(srcdir)/../../build-aux/missing $(srcdir)/Makefile.am \
+ $(srcdir)/../../build-aux/missing \
+ $(srcdir)/../../build-aux/mkinstalldirs $(srcdir)/Makefile.am \
$(srcdir)/Makefile.in $(top_srcdir)/configure \
../../build-aux/config.guess ../../build-aux/config.sub \
../../build-aux/depcomp ../../build-aux/install-sh \
../../build-aux/ltmain.sh ../../build-aux/missing \
- ../../build-aux/texinfo.tex ../../build-aux/ylwrap AUTHORS \
- COPYING INSTALL NEWS
+ ../../build-aux/mkinstalldirs ../../build-aux/texinfo.tex \
+ ../../build-aux/ylwrap AUTHORS COPYING INSTALL NEWS
ACLOCAL_M4 = $(top_srcdir)/aclocal.m4
am__aclocal_m4_deps = $(top_srcdir)/m4/tl_msg_error.m4 \
$(top_srcdir)/ac/xindy.ac $(top_srcdir)/configure.ac
@@ -53,7 +54,7 @@ am__configure_deps = $(am__aclocal_m4_deps) $(CONFIGURE_DEPENDENCIES) \
$(ACLOCAL_M4)
am__CONFIG_DISTCLEAN_FILES = config.status config.cache config.log \
configure.lineno config.status.lineno
-mkinstalldirs = $(install_sh) -d
+mkinstalldirs = $(SHELL) $(top_srcdir)/../../build-aux/mkinstalldirs
CONFIG_CLEAN_FILES =
SOURCES =
DIST_SOURCES =
diff --git a/Build/source/utils/xindy/binaries/Makefile.in b/Build/source/utils/xindy/binaries/Makefile.in
index b0d82bedab3..6a890768025 100644
--- a/Build/source/utils/xindy/binaries/Makefile.in
+++ b/Build/source/utils/xindy/binaries/Makefile.in
@@ -40,7 +40,7 @@ am__aclocal_m4_deps = $(top_srcdir)/m4/tl_msg_error.m4 \
$(top_srcdir)/ac/xindy.ac $(top_srcdir)/configure.ac
am__configure_deps = $(am__aclocal_m4_deps) $(CONFIGURE_DEPENDENCIES) \
$(ACLOCAL_M4)
-mkinstalldirs = $(install_sh) -d
+mkinstalldirs = $(SHELL) $(top_srcdir)/../../build-aux/mkinstalldirs
CONFIG_CLEAN_FILES =
am__installdirs = "$(DESTDIR)$(kerneldir)" "$(DESTDIR)$(kerneldir)"
kernelSCRIPT_INSTALL = $(INSTALL_SCRIPT)
diff --git a/Build/source/utils/xindy/doc/Makefile.in b/Build/source/utils/xindy/doc/Makefile.in
index b301eb72288..9b07b4291ce 100644
--- a/Build/source/utils/xindy/doc/Makefile.in
+++ b/Build/source/utils/xindy/doc/Makefile.in
@@ -40,7 +40,7 @@ am__aclocal_m4_deps = $(top_srcdir)/m4/tl_msg_error.m4 \
$(top_srcdir)/ac/xindy.ac $(top_srcdir)/configure.ac
am__configure_deps = $(am__aclocal_m4_deps) $(CONFIGURE_DEPENDENCIES) \
$(ACLOCAL_M4)
-mkinstalldirs = $(install_sh) -d
+mkinstalldirs = $(SHELL) $(top_srcdir)/../../build-aux/mkinstalldirs
CONFIG_CLEAN_FILES =
SOURCES =
DIST_SOURCES =
diff --git a/Build/source/utils/xindy/doc/style-tutorial/Makefile.in b/Build/source/utils/xindy/doc/style-tutorial/Makefile.in
index 8327aca3b6b..726842ca67f 100644
--- a/Build/source/utils/xindy/doc/style-tutorial/Makefile.in
+++ b/Build/source/utils/xindy/doc/style-tutorial/Makefile.in
@@ -39,7 +39,7 @@ am__aclocal_m4_deps = $(top_srcdir)/m4/tl_msg_error.m4 \
$(top_srcdir)/ac/xindy.ac $(top_srcdir)/configure.ac
am__configure_deps = $(am__aclocal_m4_deps) $(CONFIGURE_DEPENDENCIES) \
$(ACLOCAL_M4)
-mkinstalldirs = $(install_sh) -d
+mkinstalldirs = $(SHELL) $(top_srcdir)/../../build-aux/mkinstalldirs
CONFIG_CLEAN_FILES =
SOURCES =
DIST_SOURCES =
diff --git a/Build/source/utils/xindy/make-rules/Makefile.in b/Build/source/utils/xindy/make-rules/Makefile.in
index f1b89bd371a..ab592cbf413 100644
--- a/Build/source/utils/xindy/make-rules/Makefile.in
+++ b/Build/source/utils/xindy/make-rules/Makefile.in
@@ -38,7 +38,7 @@ am__aclocal_m4_deps = $(top_srcdir)/m4/tl_msg_error.m4 \
$(top_srcdir)/ac/xindy.ac $(top_srcdir)/configure.ac
am__configure_deps = $(am__aclocal_m4_deps) $(CONFIGURE_DEPENDENCIES) \
$(ACLOCAL_M4)
-mkinstalldirs = $(install_sh) -d
+mkinstalldirs = $(SHELL) $(top_srcdir)/../../build-aux/mkinstalldirs
CONFIG_CLEAN_FILES =
SOURCES =
DIST_SOURCES =
diff --git a/Build/source/utils/xindy/make-rules/alphabets/Makefile.in b/Build/source/utils/xindy/make-rules/alphabets/Makefile.in
index 013c8fb65a6..de43ee956f9 100644
--- a/Build/source/utils/xindy/make-rules/alphabets/Makefile.in
+++ b/Build/source/utils/xindy/make-rules/alphabets/Makefile.in
@@ -39,7 +39,7 @@ am__aclocal_m4_deps = $(top_srcdir)/m4/tl_msg_error.m4 \
$(top_srcdir)/ac/xindy.ac $(top_srcdir)/configure.ac
am__configure_deps = $(am__aclocal_m4_deps) $(CONFIGURE_DEPENDENCIES) \
$(ACLOCAL_M4)
-mkinstalldirs = $(install_sh) -d
+mkinstalldirs = $(SHELL) $(top_srcdir)/../../build-aux/mkinstalldirs
CONFIG_CLEAN_FILES =
SOURCES =
DIST_SOURCES =
diff --git a/Build/source/utils/xindy/make-rules/alphabets/albanian/Makefile.in b/Build/source/utils/xindy/make-rules/alphabets/albanian/Makefile.in
index 36e2d2aa6bb..4d4f2b354f7 100644
--- a/Build/source/utils/xindy/make-rules/alphabets/albanian/Makefile.in
+++ b/Build/source/utils/xindy/make-rules/alphabets/albanian/Makefile.in
@@ -38,7 +38,7 @@ am__aclocal_m4_deps = $(top_srcdir)/m4/tl_msg_error.m4 \
$(top_srcdir)/ac/xindy.ac $(top_srcdir)/configure.ac
am__configure_deps = $(am__aclocal_m4_deps) $(CONFIGURE_DEPENDENCIES) \
$(ACLOCAL_M4)
-mkinstalldirs = $(install_sh) -d
+mkinstalldirs = $(SHELL) $(top_srcdir)/../../build-aux/mkinstalldirs
CONFIG_CLEAN_FILES =
SOURCES =
DIST_SOURCES =
diff --git a/Build/source/utils/xindy/make-rules/alphabets/belarusian/Makefile.in b/Build/source/utils/xindy/make-rules/alphabets/belarusian/Makefile.in
index c26ac114be4..9e7379e34a8 100644
--- a/Build/source/utils/xindy/make-rules/alphabets/belarusian/Makefile.in
+++ b/Build/source/utils/xindy/make-rules/alphabets/belarusian/Makefile.in
@@ -38,7 +38,7 @@ am__aclocal_m4_deps = $(top_srcdir)/m4/tl_msg_error.m4 \
$(top_srcdir)/ac/xindy.ac $(top_srcdir)/configure.ac
am__configure_deps = $(am__aclocal_m4_deps) $(CONFIGURE_DEPENDENCIES) \
$(ACLOCAL_M4)
-mkinstalldirs = $(install_sh) -d
+mkinstalldirs = $(SHELL) $(top_srcdir)/../../build-aux/mkinstalldirs
CONFIG_CLEAN_FILES =
SOURCES =
DIST_SOURCES =
diff --git a/Build/source/utils/xindy/make-rules/alphabets/bulgarian/Makefile.in b/Build/source/utils/xindy/make-rules/alphabets/bulgarian/Makefile.in
index 7a8a56eef78..3615170ed72 100644
--- a/Build/source/utils/xindy/make-rules/alphabets/bulgarian/Makefile.in
+++ b/Build/source/utils/xindy/make-rules/alphabets/bulgarian/Makefile.in
@@ -38,7 +38,7 @@ am__aclocal_m4_deps = $(top_srcdir)/m4/tl_msg_error.m4 \
$(top_srcdir)/ac/xindy.ac $(top_srcdir)/configure.ac
am__configure_deps = $(am__aclocal_m4_deps) $(CONFIGURE_DEPENDENCIES) \
$(ACLOCAL_M4)
-mkinstalldirs = $(install_sh) -d
+mkinstalldirs = $(SHELL) $(top_srcdir)/../../build-aux/mkinstalldirs
CONFIG_CLEAN_FILES =
SOURCES =
DIST_SOURCES =
diff --git a/Build/source/utils/xindy/make-rules/alphabets/croatian/Makefile.in b/Build/source/utils/xindy/make-rules/alphabets/croatian/Makefile.in
index 4d2f4f64b73..86b2aa39008 100644
--- a/Build/source/utils/xindy/make-rules/alphabets/croatian/Makefile.in
+++ b/Build/source/utils/xindy/make-rules/alphabets/croatian/Makefile.in
@@ -38,7 +38,7 @@ am__aclocal_m4_deps = $(top_srcdir)/m4/tl_msg_error.m4 \
$(top_srcdir)/ac/xindy.ac $(top_srcdir)/configure.ac
am__configure_deps = $(am__aclocal_m4_deps) $(CONFIGURE_DEPENDENCIES) \
$(ACLOCAL_M4)
-mkinstalldirs = $(install_sh) -d
+mkinstalldirs = $(SHELL) $(top_srcdir)/../../build-aux/mkinstalldirs
CONFIG_CLEAN_FILES =
SOURCES =
DIST_SOURCES =
diff --git a/Build/source/utils/xindy/make-rules/alphabets/czech/Makefile.in b/Build/source/utils/xindy/make-rules/alphabets/czech/Makefile.in
index ccd42ac3373..b91c763bf14 100644
--- a/Build/source/utils/xindy/make-rules/alphabets/czech/Makefile.in
+++ b/Build/source/utils/xindy/make-rules/alphabets/czech/Makefile.in
@@ -38,7 +38,7 @@ am__aclocal_m4_deps = $(top_srcdir)/m4/tl_msg_error.m4 \
$(top_srcdir)/ac/xindy.ac $(top_srcdir)/configure.ac
am__configure_deps = $(am__aclocal_m4_deps) $(CONFIGURE_DEPENDENCIES) \
$(ACLOCAL_M4)
-mkinstalldirs = $(install_sh) -d
+mkinstalldirs = $(SHELL) $(top_srcdir)/../../build-aux/mkinstalldirs
CONFIG_CLEAN_FILES =
SOURCES =
DIST_SOURCES =
diff --git a/Build/source/utils/xindy/make-rules/alphabets/danish/Makefile.in b/Build/source/utils/xindy/make-rules/alphabets/danish/Makefile.in
index 9b5a65ccc88..94114fe3ad4 100644
--- a/Build/source/utils/xindy/make-rules/alphabets/danish/Makefile.in
+++ b/Build/source/utils/xindy/make-rules/alphabets/danish/Makefile.in
@@ -38,7 +38,7 @@ am__aclocal_m4_deps = $(top_srcdir)/m4/tl_msg_error.m4 \
$(top_srcdir)/ac/xindy.ac $(top_srcdir)/configure.ac
am__configure_deps = $(am__aclocal_m4_deps) $(CONFIGURE_DEPENDENCIES) \
$(ACLOCAL_M4)
-mkinstalldirs = $(install_sh) -d
+mkinstalldirs = $(SHELL) $(top_srcdir)/../../build-aux/mkinstalldirs
CONFIG_CLEAN_FILES =
SOURCES =
DIST_SOURCES =
diff --git a/Build/source/utils/xindy/make-rules/alphabets/dutch/Makefile.in b/Build/source/utils/xindy/make-rules/alphabets/dutch/Makefile.in
index 64efb76bc2e..dd4061e47c7 100644
--- a/Build/source/utils/xindy/make-rules/alphabets/dutch/Makefile.in
+++ b/Build/source/utils/xindy/make-rules/alphabets/dutch/Makefile.in
@@ -38,7 +38,7 @@ am__aclocal_m4_deps = $(top_srcdir)/m4/tl_msg_error.m4 \
$(top_srcdir)/ac/xindy.ac $(top_srcdir)/configure.ac
am__configure_deps = $(am__aclocal_m4_deps) $(CONFIGURE_DEPENDENCIES) \
$(ACLOCAL_M4)
-mkinstalldirs = $(install_sh) -d
+mkinstalldirs = $(SHELL) $(top_srcdir)/../../build-aux/mkinstalldirs
CONFIG_CLEAN_FILES =
SOURCES =
DIST_SOURCES =
diff --git a/Build/source/utils/xindy/make-rules/alphabets/english/Makefile.in b/Build/source/utils/xindy/make-rules/alphabets/english/Makefile.in
index 099c26b0cb6..084770943e2 100644
--- a/Build/source/utils/xindy/make-rules/alphabets/english/Makefile.in
+++ b/Build/source/utils/xindy/make-rules/alphabets/english/Makefile.in
@@ -38,7 +38,7 @@ am__aclocal_m4_deps = $(top_srcdir)/m4/tl_msg_error.m4 \
$(top_srcdir)/ac/xindy.ac $(top_srcdir)/configure.ac
am__configure_deps = $(am__aclocal_m4_deps) $(CONFIGURE_DEPENDENCIES) \
$(ACLOCAL_M4)
-mkinstalldirs = $(install_sh) -d
+mkinstalldirs = $(SHELL) $(top_srcdir)/../../build-aux/mkinstalldirs
CONFIG_CLEAN_FILES =
SOURCES =
DIST_SOURCES =
diff --git a/Build/source/utils/xindy/make-rules/alphabets/esperanto/Makefile.in b/Build/source/utils/xindy/make-rules/alphabets/esperanto/Makefile.in
index 24cd5ee8dee..eabd08d148d 100644
--- a/Build/source/utils/xindy/make-rules/alphabets/esperanto/Makefile.in
+++ b/Build/source/utils/xindy/make-rules/alphabets/esperanto/Makefile.in
@@ -38,7 +38,7 @@ am__aclocal_m4_deps = $(top_srcdir)/m4/tl_msg_error.m4 \
$(top_srcdir)/ac/xindy.ac $(top_srcdir)/configure.ac
am__configure_deps = $(am__aclocal_m4_deps) $(CONFIGURE_DEPENDENCIES) \
$(ACLOCAL_M4)
-mkinstalldirs = $(install_sh) -d
+mkinstalldirs = $(SHELL) $(top_srcdir)/../../build-aux/mkinstalldirs
CONFIG_CLEAN_FILES =
SOURCES =
DIST_SOURCES =
diff --git a/Build/source/utils/xindy/make-rules/alphabets/estonian/Makefile.in b/Build/source/utils/xindy/make-rules/alphabets/estonian/Makefile.in
index f18295dc7dc..8e715d35815 100644
--- a/Build/source/utils/xindy/make-rules/alphabets/estonian/Makefile.in
+++ b/Build/source/utils/xindy/make-rules/alphabets/estonian/Makefile.in
@@ -38,7 +38,7 @@ am__aclocal_m4_deps = $(top_srcdir)/m4/tl_msg_error.m4 \
$(top_srcdir)/ac/xindy.ac $(top_srcdir)/configure.ac
am__configure_deps = $(am__aclocal_m4_deps) $(CONFIGURE_DEPENDENCIES) \
$(ACLOCAL_M4)
-mkinstalldirs = $(install_sh) -d
+mkinstalldirs = $(SHELL) $(top_srcdir)/../../build-aux/mkinstalldirs
CONFIG_CLEAN_FILES =
SOURCES =
DIST_SOURCES =
diff --git a/Build/source/utils/xindy/make-rules/alphabets/finnish/Makefile.in b/Build/source/utils/xindy/make-rules/alphabets/finnish/Makefile.in
index f34b85e8dda..2090c1ea69b 100644
--- a/Build/source/utils/xindy/make-rules/alphabets/finnish/Makefile.in
+++ b/Build/source/utils/xindy/make-rules/alphabets/finnish/Makefile.in
@@ -38,7 +38,7 @@ am__aclocal_m4_deps = $(top_srcdir)/m4/tl_msg_error.m4 \
$(top_srcdir)/ac/xindy.ac $(top_srcdir)/configure.ac
am__configure_deps = $(am__aclocal_m4_deps) $(CONFIGURE_DEPENDENCIES) \
$(ACLOCAL_M4)
-mkinstalldirs = $(install_sh) -d
+mkinstalldirs = $(SHELL) $(top_srcdir)/../../build-aux/mkinstalldirs
CONFIG_CLEAN_FILES =
SOURCES =
DIST_SOURCES =
diff --git a/Build/source/utils/xindy/make-rules/alphabets/french/Makefile.in b/Build/source/utils/xindy/make-rules/alphabets/french/Makefile.in
index 82f664c103b..39e6fe8c53c 100644
--- a/Build/source/utils/xindy/make-rules/alphabets/french/Makefile.in
+++ b/Build/source/utils/xindy/make-rules/alphabets/french/Makefile.in
@@ -38,7 +38,7 @@ am__aclocal_m4_deps = $(top_srcdir)/m4/tl_msg_error.m4 \
$(top_srcdir)/ac/xindy.ac $(top_srcdir)/configure.ac
am__configure_deps = $(am__aclocal_m4_deps) $(CONFIGURE_DEPENDENCIES) \
$(ACLOCAL_M4)
-mkinstalldirs = $(install_sh) -d
+mkinstalldirs = $(SHELL) $(top_srcdir)/../../build-aux/mkinstalldirs
CONFIG_CLEAN_FILES =
SOURCES =
DIST_SOURCES =
diff --git a/Build/source/utils/xindy/make-rules/alphabets/general/Makefile.in b/Build/source/utils/xindy/make-rules/alphabets/general/Makefile.in
index a29fa794d3f..faacde711b4 100644
--- a/Build/source/utils/xindy/make-rules/alphabets/general/Makefile.in
+++ b/Build/source/utils/xindy/make-rules/alphabets/general/Makefile.in
@@ -38,7 +38,7 @@ am__aclocal_m4_deps = $(top_srcdir)/m4/tl_msg_error.m4 \
$(top_srcdir)/ac/xindy.ac $(top_srcdir)/configure.ac
am__configure_deps = $(am__aclocal_m4_deps) $(CONFIGURE_DEPENDENCIES) \
$(ACLOCAL_M4)
-mkinstalldirs = $(install_sh) -d
+mkinstalldirs = $(SHELL) $(top_srcdir)/../../build-aux/mkinstalldirs
CONFIG_CLEAN_FILES =
SOURCES =
DIST_SOURCES =
diff --git a/Build/source/utils/xindy/make-rules/alphabets/georgian/Makefile.in b/Build/source/utils/xindy/make-rules/alphabets/georgian/Makefile.in
index 0ec4f7d2c19..9d2e065853a 100644
--- a/Build/source/utils/xindy/make-rules/alphabets/georgian/Makefile.in
+++ b/Build/source/utils/xindy/make-rules/alphabets/georgian/Makefile.in
@@ -38,7 +38,7 @@ am__aclocal_m4_deps = $(top_srcdir)/m4/tl_msg_error.m4 \
$(top_srcdir)/ac/xindy.ac $(top_srcdir)/configure.ac
am__configure_deps = $(am__aclocal_m4_deps) $(CONFIGURE_DEPENDENCIES) \
$(ACLOCAL_M4)
-mkinstalldirs = $(install_sh) -d
+mkinstalldirs = $(SHELL) $(top_srcdir)/../../build-aux/mkinstalldirs
CONFIG_CLEAN_FILES =
SOURCES =
DIST_SOURCES =
diff --git a/Build/source/utils/xindy/make-rules/alphabets/german/Makefile.in b/Build/source/utils/xindy/make-rules/alphabets/german/Makefile.in
index c3da3792baa..18f601bafc3 100644
--- a/Build/source/utils/xindy/make-rules/alphabets/german/Makefile.in
+++ b/Build/source/utils/xindy/make-rules/alphabets/german/Makefile.in
@@ -38,7 +38,7 @@ am__aclocal_m4_deps = $(top_srcdir)/m4/tl_msg_error.m4 \
$(top_srcdir)/ac/xindy.ac $(top_srcdir)/configure.ac
am__configure_deps = $(am__aclocal_m4_deps) $(CONFIGURE_DEPENDENCIES) \
$(ACLOCAL_M4)
-mkinstalldirs = $(install_sh) -d
+mkinstalldirs = $(SHELL) $(top_srcdir)/../../build-aux/mkinstalldirs
CONFIG_CLEAN_FILES =
SOURCES =
DIST_SOURCES =
diff --git a/Build/source/utils/xindy/make-rules/alphabets/greek/Makefile.in b/Build/source/utils/xindy/make-rules/alphabets/greek/Makefile.in
index e5151fdf05a..986023143d7 100644
--- a/Build/source/utils/xindy/make-rules/alphabets/greek/Makefile.in
+++ b/Build/source/utils/xindy/make-rules/alphabets/greek/Makefile.in
@@ -38,7 +38,7 @@ am__aclocal_m4_deps = $(top_srcdir)/m4/tl_msg_error.m4 \
$(top_srcdir)/ac/xindy.ac $(top_srcdir)/configure.ac
am__configure_deps = $(am__aclocal_m4_deps) $(CONFIGURE_DEPENDENCIES) \
$(ACLOCAL_M4)
-mkinstalldirs = $(install_sh) -d
+mkinstalldirs = $(SHELL) $(top_srcdir)/../../build-aux/mkinstalldirs
CONFIG_CLEAN_FILES =
SOURCES =
DIST_SOURCES =
diff --git a/Build/source/utils/xindy/make-rules/alphabets/gypsy/Makefile.in b/Build/source/utils/xindy/make-rules/alphabets/gypsy/Makefile.in
index 02df3fbc8ee..f2c5f45ac43 100644
--- a/Build/source/utils/xindy/make-rules/alphabets/gypsy/Makefile.in
+++ b/Build/source/utils/xindy/make-rules/alphabets/gypsy/Makefile.in
@@ -38,7 +38,7 @@ am__aclocal_m4_deps = $(top_srcdir)/m4/tl_msg_error.m4 \
$(top_srcdir)/ac/xindy.ac $(top_srcdir)/configure.ac
am__configure_deps = $(am__aclocal_m4_deps) $(CONFIGURE_DEPENDENCIES) \
$(ACLOCAL_M4)
-mkinstalldirs = $(install_sh) -d
+mkinstalldirs = $(SHELL) $(top_srcdir)/../../build-aux/mkinstalldirs
CONFIG_CLEAN_FILES =
SOURCES =
DIST_SOURCES =
diff --git a/Build/source/utils/xindy/make-rules/alphabets/hausa/Makefile.in b/Build/source/utils/xindy/make-rules/alphabets/hausa/Makefile.in
index 244850da6d1..624028f5ca6 100644
--- a/Build/source/utils/xindy/make-rules/alphabets/hausa/Makefile.in
+++ b/Build/source/utils/xindy/make-rules/alphabets/hausa/Makefile.in
@@ -38,7 +38,7 @@ am__aclocal_m4_deps = $(top_srcdir)/m4/tl_msg_error.m4 \
$(top_srcdir)/ac/xindy.ac $(top_srcdir)/configure.ac
am__configure_deps = $(am__aclocal_m4_deps) $(CONFIGURE_DEPENDENCIES) \
$(ACLOCAL_M4)
-mkinstalldirs = $(install_sh) -d
+mkinstalldirs = $(SHELL) $(top_srcdir)/../../build-aux/mkinstalldirs
CONFIG_CLEAN_FILES =
SOURCES =
DIST_SOURCES =
diff --git a/Build/source/utils/xindy/make-rules/alphabets/hebrew/Makefile.in b/Build/source/utils/xindy/make-rules/alphabets/hebrew/Makefile.in
index 13835650c3f..aea91c961d9 100644
--- a/Build/source/utils/xindy/make-rules/alphabets/hebrew/Makefile.in
+++ b/Build/source/utils/xindy/make-rules/alphabets/hebrew/Makefile.in
@@ -38,7 +38,7 @@ am__aclocal_m4_deps = $(top_srcdir)/m4/tl_msg_error.m4 \
$(top_srcdir)/ac/xindy.ac $(top_srcdir)/configure.ac
am__configure_deps = $(am__aclocal_m4_deps) $(CONFIGURE_DEPENDENCIES) \
$(ACLOCAL_M4)
-mkinstalldirs = $(install_sh) -d
+mkinstalldirs = $(SHELL) $(top_srcdir)/../../build-aux/mkinstalldirs
CONFIG_CLEAN_FILES =
SOURCES =
DIST_SOURCES =
diff --git a/Build/source/utils/xindy/make-rules/alphabets/hungarian/Makefile.in b/Build/source/utils/xindy/make-rules/alphabets/hungarian/Makefile.in
index e53e70d09d6..b436fbc5bb6 100644
--- a/Build/source/utils/xindy/make-rules/alphabets/hungarian/Makefile.in
+++ b/Build/source/utils/xindy/make-rules/alphabets/hungarian/Makefile.in
@@ -38,7 +38,7 @@ am__aclocal_m4_deps = $(top_srcdir)/m4/tl_msg_error.m4 \
$(top_srcdir)/ac/xindy.ac $(top_srcdir)/configure.ac
am__configure_deps = $(am__aclocal_m4_deps) $(CONFIGURE_DEPENDENCIES) \
$(ACLOCAL_M4)
-mkinstalldirs = $(install_sh) -d
+mkinstalldirs = $(SHELL) $(top_srcdir)/../../build-aux/mkinstalldirs
CONFIG_CLEAN_FILES =
SOURCES =
DIST_SOURCES =
diff --git a/Build/source/utils/xindy/make-rules/alphabets/icelandic/Makefile.in b/Build/source/utils/xindy/make-rules/alphabets/icelandic/Makefile.in
index e8dfdc4cdfd..34b3fafa2e2 100644
--- a/Build/source/utils/xindy/make-rules/alphabets/icelandic/Makefile.in
+++ b/Build/source/utils/xindy/make-rules/alphabets/icelandic/Makefile.in
@@ -38,7 +38,7 @@ am__aclocal_m4_deps = $(top_srcdir)/m4/tl_msg_error.m4 \
$(top_srcdir)/ac/xindy.ac $(top_srcdir)/configure.ac
am__configure_deps = $(am__aclocal_m4_deps) $(CONFIGURE_DEPENDENCIES) \
$(ACLOCAL_M4)
-mkinstalldirs = $(install_sh) -d
+mkinstalldirs = $(SHELL) $(top_srcdir)/../../build-aux/mkinstalldirs
CONFIG_CLEAN_FILES =
SOURCES =
DIST_SOURCES =
diff --git a/Build/source/utils/xindy/make-rules/alphabets/italian/Makefile.in b/Build/source/utils/xindy/make-rules/alphabets/italian/Makefile.in
index cc9770f03e6..815669719bd 100644
--- a/Build/source/utils/xindy/make-rules/alphabets/italian/Makefile.in
+++ b/Build/source/utils/xindy/make-rules/alphabets/italian/Makefile.in
@@ -38,7 +38,7 @@ am__aclocal_m4_deps = $(top_srcdir)/m4/tl_msg_error.m4 \
$(top_srcdir)/ac/xindy.ac $(top_srcdir)/configure.ac
am__configure_deps = $(am__aclocal_m4_deps) $(CONFIGURE_DEPENDENCIES) \
$(ACLOCAL_M4)
-mkinstalldirs = $(install_sh) -d
+mkinstalldirs = $(SHELL) $(top_srcdir)/../../build-aux/mkinstalldirs
CONFIG_CLEAN_FILES =
SOURCES =
DIST_SOURCES =
diff --git a/Build/source/utils/xindy/make-rules/alphabets/klingon/Makefile.in b/Build/source/utils/xindy/make-rules/alphabets/klingon/Makefile.in
index 757f2ba03d1..0577bd092a8 100644
--- a/Build/source/utils/xindy/make-rules/alphabets/klingon/Makefile.in
+++ b/Build/source/utils/xindy/make-rules/alphabets/klingon/Makefile.in
@@ -38,7 +38,7 @@ am__aclocal_m4_deps = $(top_srcdir)/m4/tl_msg_error.m4 \
$(top_srcdir)/ac/xindy.ac $(top_srcdir)/configure.ac
am__configure_deps = $(am__aclocal_m4_deps) $(CONFIGURE_DEPENDENCIES) \
$(ACLOCAL_M4)
-mkinstalldirs = $(install_sh) -d
+mkinstalldirs = $(SHELL) $(top_srcdir)/../../build-aux/mkinstalldirs
CONFIG_CLEAN_FILES =
SOURCES =
DIST_SOURCES =
diff --git a/Build/source/utils/xindy/make-rules/alphabets/kurdish/Makefile.in b/Build/source/utils/xindy/make-rules/alphabets/kurdish/Makefile.in
index 18658ac0d28..c36758390ed 100644
--- a/Build/source/utils/xindy/make-rules/alphabets/kurdish/Makefile.in
+++ b/Build/source/utils/xindy/make-rules/alphabets/kurdish/Makefile.in
@@ -38,7 +38,7 @@ am__aclocal_m4_deps = $(top_srcdir)/m4/tl_msg_error.m4 \
$(top_srcdir)/ac/xindy.ac $(top_srcdir)/configure.ac
am__configure_deps = $(am__aclocal_m4_deps) $(CONFIGURE_DEPENDENCIES) \
$(ACLOCAL_M4)
-mkinstalldirs = $(install_sh) -d
+mkinstalldirs = $(SHELL) $(top_srcdir)/../../build-aux/mkinstalldirs
CONFIG_CLEAN_FILES =
SOURCES =
DIST_SOURCES =
diff --git a/Build/source/utils/xindy/make-rules/alphabets/latin/Makefile.in b/Build/source/utils/xindy/make-rules/alphabets/latin/Makefile.in
index bd16794884b..504ec829a2b 100644
--- a/Build/source/utils/xindy/make-rules/alphabets/latin/Makefile.in
+++ b/Build/source/utils/xindy/make-rules/alphabets/latin/Makefile.in
@@ -38,7 +38,7 @@ am__aclocal_m4_deps = $(top_srcdir)/m4/tl_msg_error.m4 \
$(top_srcdir)/ac/xindy.ac $(top_srcdir)/configure.ac
am__configure_deps = $(am__aclocal_m4_deps) $(CONFIGURE_DEPENDENCIES) \
$(ACLOCAL_M4)
-mkinstalldirs = $(install_sh) -d
+mkinstalldirs = $(SHELL) $(top_srcdir)/../../build-aux/mkinstalldirs
CONFIG_CLEAN_FILES =
SOURCES =
DIST_SOURCES =
diff --git a/Build/source/utils/xindy/make-rules/alphabets/latvian/Makefile.in b/Build/source/utils/xindy/make-rules/alphabets/latvian/Makefile.in
index 3e443a064d7..9fbe105ac11 100644
--- a/Build/source/utils/xindy/make-rules/alphabets/latvian/Makefile.in
+++ b/Build/source/utils/xindy/make-rules/alphabets/latvian/Makefile.in
@@ -38,7 +38,7 @@ am__aclocal_m4_deps = $(top_srcdir)/m4/tl_msg_error.m4 \
$(top_srcdir)/ac/xindy.ac $(top_srcdir)/configure.ac
am__configure_deps = $(am__aclocal_m4_deps) $(CONFIGURE_DEPENDENCIES) \
$(ACLOCAL_M4)
-mkinstalldirs = $(install_sh) -d
+mkinstalldirs = $(SHELL) $(top_srcdir)/../../build-aux/mkinstalldirs
CONFIG_CLEAN_FILES =
SOURCES =
DIST_SOURCES =
diff --git a/Build/source/utils/xindy/make-rules/alphabets/lithuanian/Makefile.in b/Build/source/utils/xindy/make-rules/alphabets/lithuanian/Makefile.in
index cf477cc9412..266fa157af8 100644
--- a/Build/source/utils/xindy/make-rules/alphabets/lithuanian/Makefile.in
+++ b/Build/source/utils/xindy/make-rules/alphabets/lithuanian/Makefile.in
@@ -38,7 +38,7 @@ am__aclocal_m4_deps = $(top_srcdir)/m4/tl_msg_error.m4 \
$(top_srcdir)/ac/xindy.ac $(top_srcdir)/configure.ac
am__configure_deps = $(am__aclocal_m4_deps) $(CONFIGURE_DEPENDENCIES) \
$(ACLOCAL_M4)
-mkinstalldirs = $(install_sh) -d
+mkinstalldirs = $(SHELL) $(top_srcdir)/../../build-aux/mkinstalldirs
CONFIG_CLEAN_FILES =
SOURCES =
DIST_SOURCES =
diff --git a/Build/source/utils/xindy/make-rules/alphabets/lower-sorbian/Makefile.in b/Build/source/utils/xindy/make-rules/alphabets/lower-sorbian/Makefile.in
index 3be885b4d85..47ff009f35b 100644
--- a/Build/source/utils/xindy/make-rules/alphabets/lower-sorbian/Makefile.in
+++ b/Build/source/utils/xindy/make-rules/alphabets/lower-sorbian/Makefile.in
@@ -38,7 +38,7 @@ am__aclocal_m4_deps = $(top_srcdir)/m4/tl_msg_error.m4 \
$(top_srcdir)/ac/xindy.ac $(top_srcdir)/configure.ac
am__configure_deps = $(am__aclocal_m4_deps) $(CONFIGURE_DEPENDENCIES) \
$(ACLOCAL_M4)
-mkinstalldirs = $(install_sh) -d
+mkinstalldirs = $(SHELL) $(top_srcdir)/../../build-aux/mkinstalldirs
CONFIG_CLEAN_FILES =
SOURCES =
DIST_SOURCES =
diff --git a/Build/source/utils/xindy/make-rules/alphabets/macedonian/Makefile.in b/Build/source/utils/xindy/make-rules/alphabets/macedonian/Makefile.in
index fbeb71f749a..bcdfac0bbd0 100644
--- a/Build/source/utils/xindy/make-rules/alphabets/macedonian/Makefile.in
+++ b/Build/source/utils/xindy/make-rules/alphabets/macedonian/Makefile.in
@@ -38,7 +38,7 @@ am__aclocal_m4_deps = $(top_srcdir)/m4/tl_msg_error.m4 \
$(top_srcdir)/ac/xindy.ac $(top_srcdir)/configure.ac
am__configure_deps = $(am__aclocal_m4_deps) $(CONFIGURE_DEPENDENCIES) \
$(ACLOCAL_M4)
-mkinstalldirs = $(install_sh) -d
+mkinstalldirs = $(SHELL) $(top_srcdir)/../../build-aux/mkinstalldirs
CONFIG_CLEAN_FILES =
SOURCES =
DIST_SOURCES =
diff --git a/Build/source/utils/xindy/make-rules/alphabets/mongolian/Makefile.in b/Build/source/utils/xindy/make-rules/alphabets/mongolian/Makefile.in
index 35d6d8097b8..1f9832a90de 100644
--- a/Build/source/utils/xindy/make-rules/alphabets/mongolian/Makefile.in
+++ b/Build/source/utils/xindy/make-rules/alphabets/mongolian/Makefile.in
@@ -38,7 +38,7 @@ am__aclocal_m4_deps = $(top_srcdir)/m4/tl_msg_error.m4 \
$(top_srcdir)/ac/xindy.ac $(top_srcdir)/configure.ac
am__configure_deps = $(am__aclocal_m4_deps) $(CONFIGURE_DEPENDENCIES) \
$(ACLOCAL_M4)
-mkinstalldirs = $(install_sh) -d
+mkinstalldirs = $(SHELL) $(top_srcdir)/../../build-aux/mkinstalldirs
CONFIG_CLEAN_FILES =
SOURCES =
DIST_SOURCES =
diff --git a/Build/source/utils/xindy/make-rules/alphabets/norwegian/Makefile.in b/Build/source/utils/xindy/make-rules/alphabets/norwegian/Makefile.in
index 19b4ec16900..02d0cf0c3f9 100644
--- a/Build/source/utils/xindy/make-rules/alphabets/norwegian/Makefile.in
+++ b/Build/source/utils/xindy/make-rules/alphabets/norwegian/Makefile.in
@@ -38,7 +38,7 @@ am__aclocal_m4_deps = $(top_srcdir)/m4/tl_msg_error.m4 \
$(top_srcdir)/ac/xindy.ac $(top_srcdir)/configure.ac
am__configure_deps = $(am__aclocal_m4_deps) $(CONFIGURE_DEPENDENCIES) \
$(ACLOCAL_M4)
-mkinstalldirs = $(install_sh) -d
+mkinstalldirs = $(SHELL) $(top_srcdir)/../../build-aux/mkinstalldirs
CONFIG_CLEAN_FILES =
SOURCES =
DIST_SOURCES =
diff --git a/Build/source/utils/xindy/make-rules/alphabets/polish/Makefile.in b/Build/source/utils/xindy/make-rules/alphabets/polish/Makefile.in
index 6c94d673f80..b2a3fa37279 100644
--- a/Build/source/utils/xindy/make-rules/alphabets/polish/Makefile.in
+++ b/Build/source/utils/xindy/make-rules/alphabets/polish/Makefile.in
@@ -38,7 +38,7 @@ am__aclocal_m4_deps = $(top_srcdir)/m4/tl_msg_error.m4 \
$(top_srcdir)/ac/xindy.ac $(top_srcdir)/configure.ac
am__configure_deps = $(am__aclocal_m4_deps) $(CONFIGURE_DEPENDENCIES) \
$(ACLOCAL_M4)
-mkinstalldirs = $(install_sh) -d
+mkinstalldirs = $(SHELL) $(top_srcdir)/../../build-aux/mkinstalldirs
CONFIG_CLEAN_FILES =
SOURCES =
DIST_SOURCES =
diff --git a/Build/source/utils/xindy/make-rules/alphabets/portuguese/Makefile.in b/Build/source/utils/xindy/make-rules/alphabets/portuguese/Makefile.in
index 0d9b45a75fd..9ad545ed1d2 100644
--- a/Build/source/utils/xindy/make-rules/alphabets/portuguese/Makefile.in
+++ b/Build/source/utils/xindy/make-rules/alphabets/portuguese/Makefile.in
@@ -38,7 +38,7 @@ am__aclocal_m4_deps = $(top_srcdir)/m4/tl_msg_error.m4 \
$(top_srcdir)/ac/xindy.ac $(top_srcdir)/configure.ac
am__configure_deps = $(am__aclocal_m4_deps) $(CONFIGURE_DEPENDENCIES) \
$(ACLOCAL_M4)
-mkinstalldirs = $(install_sh) -d
+mkinstalldirs = $(SHELL) $(top_srcdir)/../../build-aux/mkinstalldirs
CONFIG_CLEAN_FILES =
SOURCES =
DIST_SOURCES =
diff --git a/Build/source/utils/xindy/make-rules/alphabets/romanian/Makefile.in b/Build/source/utils/xindy/make-rules/alphabets/romanian/Makefile.in
index e65616ae8d4..5524364de32 100644
--- a/Build/source/utils/xindy/make-rules/alphabets/romanian/Makefile.in
+++ b/Build/source/utils/xindy/make-rules/alphabets/romanian/Makefile.in
@@ -38,7 +38,7 @@ am__aclocal_m4_deps = $(top_srcdir)/m4/tl_msg_error.m4 \
$(top_srcdir)/ac/xindy.ac $(top_srcdir)/configure.ac
am__configure_deps = $(am__aclocal_m4_deps) $(CONFIGURE_DEPENDENCIES) \
$(ACLOCAL_M4)
-mkinstalldirs = $(install_sh) -d
+mkinstalldirs = $(SHELL) $(top_srcdir)/../../build-aux/mkinstalldirs
CONFIG_CLEAN_FILES =
SOURCES =
DIST_SOURCES =
diff --git a/Build/source/utils/xindy/make-rules/alphabets/russian/Makefile.in b/Build/source/utils/xindy/make-rules/alphabets/russian/Makefile.in
index 07a5b7d6e54..a55fd60ab3d 100644
--- a/Build/source/utils/xindy/make-rules/alphabets/russian/Makefile.in
+++ b/Build/source/utils/xindy/make-rules/alphabets/russian/Makefile.in
@@ -38,7 +38,7 @@ am__aclocal_m4_deps = $(top_srcdir)/m4/tl_msg_error.m4 \
$(top_srcdir)/ac/xindy.ac $(top_srcdir)/configure.ac
am__configure_deps = $(am__aclocal_m4_deps) $(CONFIGURE_DEPENDENCIES) \
$(ACLOCAL_M4)
-mkinstalldirs = $(install_sh) -d
+mkinstalldirs = $(SHELL) $(top_srcdir)/../../build-aux/mkinstalldirs
CONFIG_CLEAN_FILES =
SOURCES =
DIST_SOURCES =
diff --git a/Build/source/utils/xindy/make-rules/alphabets/serbian/Makefile.in b/Build/source/utils/xindy/make-rules/alphabets/serbian/Makefile.in
index e3f807562bb..26a52ecb97d 100644
--- a/Build/source/utils/xindy/make-rules/alphabets/serbian/Makefile.in
+++ b/Build/source/utils/xindy/make-rules/alphabets/serbian/Makefile.in
@@ -38,7 +38,7 @@ am__aclocal_m4_deps = $(top_srcdir)/m4/tl_msg_error.m4 \
$(top_srcdir)/ac/xindy.ac $(top_srcdir)/configure.ac
am__configure_deps = $(am__aclocal_m4_deps) $(CONFIGURE_DEPENDENCIES) \
$(ACLOCAL_M4)
-mkinstalldirs = $(install_sh) -d
+mkinstalldirs = $(SHELL) $(top_srcdir)/../../build-aux/mkinstalldirs
CONFIG_CLEAN_FILES =
SOURCES =
DIST_SOURCES =
diff --git a/Build/source/utils/xindy/make-rules/alphabets/slovak/Makefile.in b/Build/source/utils/xindy/make-rules/alphabets/slovak/Makefile.in
index 8df63c20dbf..01c2fa0005b 100644
--- a/Build/source/utils/xindy/make-rules/alphabets/slovak/Makefile.in
+++ b/Build/source/utils/xindy/make-rules/alphabets/slovak/Makefile.in
@@ -38,7 +38,7 @@ am__aclocal_m4_deps = $(top_srcdir)/m4/tl_msg_error.m4 \
$(top_srcdir)/ac/xindy.ac $(top_srcdir)/configure.ac
am__configure_deps = $(am__aclocal_m4_deps) $(CONFIGURE_DEPENDENCIES) \
$(ACLOCAL_M4)
-mkinstalldirs = $(install_sh) -d
+mkinstalldirs = $(SHELL) $(top_srcdir)/../../build-aux/mkinstalldirs
CONFIG_CLEAN_FILES =
SOURCES =
DIST_SOURCES =
diff --git a/Build/source/utils/xindy/make-rules/alphabets/slovenian/Makefile.in b/Build/source/utils/xindy/make-rules/alphabets/slovenian/Makefile.in
index 6ace7933eda..793bf2ae194 100644
--- a/Build/source/utils/xindy/make-rules/alphabets/slovenian/Makefile.in
+++ b/Build/source/utils/xindy/make-rules/alphabets/slovenian/Makefile.in
@@ -38,7 +38,7 @@ am__aclocal_m4_deps = $(top_srcdir)/m4/tl_msg_error.m4 \
$(top_srcdir)/ac/xindy.ac $(top_srcdir)/configure.ac
am__configure_deps = $(am__aclocal_m4_deps) $(CONFIGURE_DEPENDENCIES) \
$(ACLOCAL_M4)
-mkinstalldirs = $(install_sh) -d
+mkinstalldirs = $(SHELL) $(top_srcdir)/../../build-aux/mkinstalldirs
CONFIG_CLEAN_FILES =
SOURCES =
DIST_SOURCES =
diff --git a/Build/source/utils/xindy/make-rules/alphabets/spanish/Makefile.in b/Build/source/utils/xindy/make-rules/alphabets/spanish/Makefile.in
index 730480313c6..a6e769b1dcc 100644
--- a/Build/source/utils/xindy/make-rules/alphabets/spanish/Makefile.in
+++ b/Build/source/utils/xindy/make-rules/alphabets/spanish/Makefile.in
@@ -38,7 +38,7 @@ am__aclocal_m4_deps = $(top_srcdir)/m4/tl_msg_error.m4 \
$(top_srcdir)/ac/xindy.ac $(top_srcdir)/configure.ac
am__configure_deps = $(am__aclocal_m4_deps) $(CONFIGURE_DEPENDENCIES) \
$(ACLOCAL_M4)
-mkinstalldirs = $(install_sh) -d
+mkinstalldirs = $(SHELL) $(top_srcdir)/../../build-aux/mkinstalldirs
CONFIG_CLEAN_FILES =
SOURCES =
DIST_SOURCES =
diff --git a/Build/source/utils/xindy/make-rules/alphabets/swedish/Makefile.in b/Build/source/utils/xindy/make-rules/alphabets/swedish/Makefile.in
index 09118c66330..482b69e9d52 100644
--- a/Build/source/utils/xindy/make-rules/alphabets/swedish/Makefile.in
+++ b/Build/source/utils/xindy/make-rules/alphabets/swedish/Makefile.in
@@ -38,7 +38,7 @@ am__aclocal_m4_deps = $(top_srcdir)/m4/tl_msg_error.m4 \
$(top_srcdir)/ac/xindy.ac $(top_srcdir)/configure.ac
am__configure_deps = $(am__aclocal_m4_deps) $(CONFIGURE_DEPENDENCIES) \
$(ACLOCAL_M4)
-mkinstalldirs = $(install_sh) -d
+mkinstalldirs = $(SHELL) $(top_srcdir)/../../build-aux/mkinstalldirs
CONFIG_CLEAN_FILES =
SOURCES =
DIST_SOURCES =
diff --git a/Build/source/utils/xindy/make-rules/alphabets/test1/Makefile.in b/Build/source/utils/xindy/make-rules/alphabets/test1/Makefile.in
index 4752d2d909e..be95bc664e7 100644
--- a/Build/source/utils/xindy/make-rules/alphabets/test1/Makefile.in
+++ b/Build/source/utils/xindy/make-rules/alphabets/test1/Makefile.in
@@ -38,7 +38,7 @@ am__aclocal_m4_deps = $(top_srcdir)/m4/tl_msg_error.m4 \
$(top_srcdir)/ac/xindy.ac $(top_srcdir)/configure.ac
am__configure_deps = $(am__aclocal_m4_deps) $(CONFIGURE_DEPENDENCIES) \
$(ACLOCAL_M4)
-mkinstalldirs = $(install_sh) -d
+mkinstalldirs = $(SHELL) $(top_srcdir)/../../build-aux/mkinstalldirs
CONFIG_CLEAN_FILES =
SOURCES =
DIST_SOURCES =
diff --git a/Build/source/utils/xindy/make-rules/alphabets/turkish/Makefile.in b/Build/source/utils/xindy/make-rules/alphabets/turkish/Makefile.in
index 244544cc605..3149d1c73dd 100644
--- a/Build/source/utils/xindy/make-rules/alphabets/turkish/Makefile.in
+++ b/Build/source/utils/xindy/make-rules/alphabets/turkish/Makefile.in
@@ -38,7 +38,7 @@ am__aclocal_m4_deps = $(top_srcdir)/m4/tl_msg_error.m4 \
$(top_srcdir)/ac/xindy.ac $(top_srcdir)/configure.ac
am__configure_deps = $(am__aclocal_m4_deps) $(CONFIGURE_DEPENDENCIES) \
$(ACLOCAL_M4)
-mkinstalldirs = $(install_sh) -d
+mkinstalldirs = $(SHELL) $(top_srcdir)/../../build-aux/mkinstalldirs
CONFIG_CLEAN_FILES =
SOURCES =
DIST_SOURCES =
diff --git a/Build/source/utils/xindy/make-rules/alphabets/ukrainian/Makefile.in b/Build/source/utils/xindy/make-rules/alphabets/ukrainian/Makefile.in
index e468aaa31a3..62a93e85c8b 100644
--- a/Build/source/utils/xindy/make-rules/alphabets/ukrainian/Makefile.in
+++ b/Build/source/utils/xindy/make-rules/alphabets/ukrainian/Makefile.in
@@ -38,7 +38,7 @@ am__aclocal_m4_deps = $(top_srcdir)/m4/tl_msg_error.m4 \
$(top_srcdir)/ac/xindy.ac $(top_srcdir)/configure.ac
am__configure_deps = $(am__aclocal_m4_deps) $(CONFIGURE_DEPENDENCIES) \
$(ACLOCAL_M4)
-mkinstalldirs = $(install_sh) -d
+mkinstalldirs = $(SHELL) $(top_srcdir)/../../build-aux/mkinstalldirs
CONFIG_CLEAN_FILES =
SOURCES =
DIST_SOURCES =
diff --git a/Build/source/utils/xindy/make-rules/alphabets/upper-sorbian/Makefile.in b/Build/source/utils/xindy/make-rules/alphabets/upper-sorbian/Makefile.in
index 6540b533aef..414b93d124a 100644
--- a/Build/source/utils/xindy/make-rules/alphabets/upper-sorbian/Makefile.in
+++ b/Build/source/utils/xindy/make-rules/alphabets/upper-sorbian/Makefile.in
@@ -38,7 +38,7 @@ am__aclocal_m4_deps = $(top_srcdir)/m4/tl_msg_error.m4 \
$(top_srcdir)/ac/xindy.ac $(top_srcdir)/configure.ac
am__configure_deps = $(am__aclocal_m4_deps) $(CONFIGURE_DEPENDENCIES) \
$(ACLOCAL_M4)
-mkinstalldirs = $(install_sh) -d
+mkinstalldirs = $(SHELL) $(top_srcdir)/../../build-aux/mkinstalldirs
CONFIG_CLEAN_FILES =
SOURCES =
DIST_SOURCES =
diff --git a/Build/source/utils/xindy/make-rules/alphabets/vietnamese/Makefile.in b/Build/source/utils/xindy/make-rules/alphabets/vietnamese/Makefile.in
index 978a1d0489d..de4f0ca10e0 100644
--- a/Build/source/utils/xindy/make-rules/alphabets/vietnamese/Makefile.in
+++ b/Build/source/utils/xindy/make-rules/alphabets/vietnamese/Makefile.in
@@ -38,7 +38,7 @@ am__aclocal_m4_deps = $(top_srcdir)/m4/tl_msg_error.m4 \
$(top_srcdir)/ac/xindy.ac $(top_srcdir)/configure.ac
am__configure_deps = $(am__aclocal_m4_deps) $(CONFIGURE_DEPENDENCIES) \
$(ACLOCAL_M4)
-mkinstalldirs = $(install_sh) -d
+mkinstalldirs = $(SHELL) $(top_srcdir)/../../build-aux/mkinstalldirs
CONFIG_CLEAN_FILES =
SOURCES =
DIST_SOURCES =
diff --git a/Build/source/utils/xindy/make-rules/inputenc/Makefile.in b/Build/source/utils/xindy/make-rules/inputenc/Makefile.in
index 38733fd60a0..d966283f996 100644
--- a/Build/source/utils/xindy/make-rules/inputenc/Makefile.in
+++ b/Build/source/utils/xindy/make-rules/inputenc/Makefile.in
@@ -39,7 +39,7 @@ am__aclocal_m4_deps = $(top_srcdir)/m4/tl_msg_error.m4 \
$(top_srcdir)/ac/xindy.ac $(top_srcdir)/configure.ac
am__configure_deps = $(am__aclocal_m4_deps) $(CONFIGURE_DEPENDENCIES) \
$(ACLOCAL_M4)
-mkinstalldirs = $(install_sh) -d
+mkinstalldirs = $(SHELL) $(top_srcdir)/../../build-aux/mkinstalldirs
CONFIG_CLEAN_FILES =
SOURCES =
DIST_SOURCES =
diff --git a/Build/source/utils/xindy/make-rules/styles/Makefile.in b/Build/source/utils/xindy/make-rules/styles/Makefile.in
index c4d8bfa7ad6..42a0a542262 100644
--- a/Build/source/utils/xindy/make-rules/styles/Makefile.in
+++ b/Build/source/utils/xindy/make-rules/styles/Makefile.in
@@ -39,7 +39,7 @@ am__aclocal_m4_deps = $(top_srcdir)/m4/tl_msg_error.m4 \
$(top_srcdir)/ac/xindy.ac $(top_srcdir)/configure.ac
am__configure_deps = $(am__aclocal_m4_deps) $(CONFIGURE_DEPENDENCIES) \
$(ACLOCAL_M4)
-mkinstalldirs = $(install_sh) -d
+mkinstalldirs = $(SHELL) $(top_srcdir)/../../build-aux/mkinstalldirs
CONFIG_CLEAN_FILES =
SOURCES =
DIST_SOURCES =
diff --git a/Build/source/utils/xindy/modules/Makefile.in b/Build/source/utils/xindy/modules/Makefile.in
index 53537557c34..bc6c0855b64 100644
--- a/Build/source/utils/xindy/modules/Makefile.in
+++ b/Build/source/utils/xindy/modules/Makefile.in
@@ -38,7 +38,7 @@ am__aclocal_m4_deps = $(top_srcdir)/m4/tl_msg_error.m4 \
$(top_srcdir)/ac/xindy.ac $(top_srcdir)/configure.ac
am__configure_deps = $(am__aclocal_m4_deps) $(CONFIGURE_DEPENDENCIES) \
$(ACLOCAL_M4)
-mkinstalldirs = $(install_sh) -d
+mkinstalldirs = $(SHELL) $(top_srcdir)/../../build-aux/mkinstalldirs
CONFIG_CLEAN_FILES =
SOURCES =
DIST_SOURCES =
diff --git a/Build/source/utils/xindy/modules/base/Makefile.in b/Build/source/utils/xindy/modules/base/Makefile.in
index 9a28ca1acc2..0bfc2270f0b 100644
--- a/Build/source/utils/xindy/modules/base/Makefile.in
+++ b/Build/source/utils/xindy/modules/base/Makefile.in
@@ -39,7 +39,7 @@ am__aclocal_m4_deps = $(top_srcdir)/m4/tl_msg_error.m4 \
$(top_srcdir)/ac/xindy.ac $(top_srcdir)/configure.ac
am__configure_deps = $(am__aclocal_m4_deps) $(CONFIGURE_DEPENDENCIES) \
$(ACLOCAL_M4)
-mkinstalldirs = $(install_sh) -d
+mkinstalldirs = $(SHELL) $(top_srcdir)/../../build-aux/mkinstalldirs
CONFIG_CLEAN_FILES =
SOURCES =
DIST_SOURCES =
diff --git a/Build/source/utils/xindy/modules/class/Makefile.in b/Build/source/utils/xindy/modules/class/Makefile.in
index 5184802eb8e..2cd301d8a4d 100644
--- a/Build/source/utils/xindy/modules/class/Makefile.in
+++ b/Build/source/utils/xindy/modules/class/Makefile.in
@@ -39,7 +39,7 @@ am__aclocal_m4_deps = $(top_srcdir)/m4/tl_msg_error.m4 \
$(top_srcdir)/ac/xindy.ac $(top_srcdir)/configure.ac
am__configure_deps = $(am__aclocal_m4_deps) $(CONFIGURE_DEPENDENCIES) \
$(ACLOCAL_M4)
-mkinstalldirs = $(install_sh) -d
+mkinstalldirs = $(SHELL) $(top_srcdir)/../../build-aux/mkinstalldirs
CONFIG_CLEAN_FILES =
SOURCES =
DIST_SOURCES =
diff --git a/Build/source/utils/xindy/modules/lang/Makefile.in b/Build/source/utils/xindy/modules/lang/Makefile.in
index b2eb96155f5..6d8bcff4cfa 100644
--- a/Build/source/utils/xindy/modules/lang/Makefile.in
+++ b/Build/source/utils/xindy/modules/lang/Makefile.in
@@ -38,7 +38,7 @@ am__aclocal_m4_deps = $(top_srcdir)/m4/tl_msg_error.m4 \
$(top_srcdir)/ac/xindy.ac $(top_srcdir)/configure.ac
am__configure_deps = $(am__aclocal_m4_deps) $(CONFIGURE_DEPENDENCIES) \
$(ACLOCAL_M4)
-mkinstalldirs = $(install_sh) -d
+mkinstalldirs = $(SHELL) $(top_srcdir)/../../build-aux/mkinstalldirs
CONFIG_CLEAN_FILES =
SOURCES =
DIST_SOURCES =
diff --git a/Build/source/utils/xindy/modules/lang/german/Makefile.in b/Build/source/utils/xindy/modules/lang/german/Makefile.in
index cfe6861ba0c..60917d1af22 100644
--- a/Build/source/utils/xindy/modules/lang/german/Makefile.in
+++ b/Build/source/utils/xindy/modules/lang/german/Makefile.in
@@ -39,7 +39,7 @@ am__aclocal_m4_deps = $(top_srcdir)/m4/tl_msg_error.m4 \
$(top_srcdir)/ac/xindy.ac $(top_srcdir)/configure.ac
am__configure_deps = $(am__aclocal_m4_deps) $(CONFIGURE_DEPENDENCIES) \
$(ACLOCAL_M4)
-mkinstalldirs = $(install_sh) -d
+mkinstalldirs = $(SHELL) $(top_srcdir)/../../build-aux/mkinstalldirs
CONFIG_CLEAN_FILES =
SOURCES =
DIST_SOURCES =
diff --git a/Build/source/utils/xindy/modules/lang/latin/Makefile.in b/Build/source/utils/xindy/modules/lang/latin/Makefile.in
index e3fe8a3e3a8..a2240fb148e 100644
--- a/Build/source/utils/xindy/modules/lang/latin/Makefile.in
+++ b/Build/source/utils/xindy/modules/lang/latin/Makefile.in
@@ -39,7 +39,7 @@ am__aclocal_m4_deps = $(top_srcdir)/m4/tl_msg_error.m4 \
$(top_srcdir)/ac/xindy.ac $(top_srcdir)/configure.ac
am__configure_deps = $(am__aclocal_m4_deps) $(CONFIGURE_DEPENDENCIES) \
$(ACLOCAL_M4)
-mkinstalldirs = $(install_sh) -d
+mkinstalldirs = $(SHELL) $(top_srcdir)/../../build-aux/mkinstalldirs
CONFIG_CLEAN_FILES =
SOURCES =
DIST_SOURCES =
diff --git a/Build/source/utils/xindy/modules/ord/Makefile.in b/Build/source/utils/xindy/modules/ord/Makefile.in
index debe6c33b85..a79194d43e7 100644
--- a/Build/source/utils/xindy/modules/ord/Makefile.in
+++ b/Build/source/utils/xindy/modules/ord/Makefile.in
@@ -39,7 +39,7 @@ am__aclocal_m4_deps = $(top_srcdir)/m4/tl_msg_error.m4 \
$(top_srcdir)/ac/xindy.ac $(top_srcdir)/configure.ac
am__configure_deps = $(am__aclocal_m4_deps) $(CONFIGURE_DEPENDENCIES) \
$(ACLOCAL_M4)
-mkinstalldirs = $(install_sh) -d
+mkinstalldirs = $(SHELL) $(top_srcdir)/../../build-aux/mkinstalldirs
CONFIG_CLEAN_FILES =
SOURCES =
DIST_SOURCES =
diff --git a/Build/source/utils/xindy/modules/rules/Makefile.in b/Build/source/utils/xindy/modules/rules/Makefile.in
index 67603b04e8a..b3eb1d7aeab 100644
--- a/Build/source/utils/xindy/modules/rules/Makefile.in
+++ b/Build/source/utils/xindy/modules/rules/Makefile.in
@@ -39,7 +39,7 @@ am__aclocal_m4_deps = $(top_srcdir)/m4/tl_msg_error.m4 \
$(top_srcdir)/ac/xindy.ac $(top_srcdir)/configure.ac
am__configure_deps = $(am__aclocal_m4_deps) $(CONFIGURE_DEPENDENCIES) \
$(ACLOCAL_M4)
-mkinstalldirs = $(install_sh) -d
+mkinstalldirs = $(SHELL) $(top_srcdir)/../../build-aux/mkinstalldirs
CONFIG_CLEAN_FILES =
SOURCES =
DIST_SOURCES =
diff --git a/Build/source/utils/xindy/modules/styles/Makefile.in b/Build/source/utils/xindy/modules/styles/Makefile.in
index c05e5b14b3e..294d5956f8b 100644
--- a/Build/source/utils/xindy/modules/styles/Makefile.in
+++ b/Build/source/utils/xindy/modules/styles/Makefile.in
@@ -39,7 +39,7 @@ am__aclocal_m4_deps = $(top_srcdir)/m4/tl_msg_error.m4 \
$(top_srcdir)/ac/xindy.ac $(top_srcdir)/configure.ac
am__configure_deps = $(am__aclocal_m4_deps) $(CONFIGURE_DEPENDENCIES) \
$(ACLOCAL_M4)
-mkinstalldirs = $(install_sh) -d
+mkinstalldirs = $(SHELL) $(top_srcdir)/../../build-aux/mkinstalldirs
CONFIG_CLEAN_FILES =
SOURCES =
DIST_SOURCES =
diff --git a/Build/source/utils/xindy/rte/Makefile.in b/Build/source/utils/xindy/rte/Makefile.in
index 05ce32729b3..9694046ced7 100644
--- a/Build/source/utils/xindy/rte/Makefile.in
+++ b/Build/source/utils/xindy/rte/Makefile.in
@@ -38,7 +38,7 @@ am__aclocal_m4_deps = $(top_srcdir)/m4/tl_msg_error.m4 \
$(top_srcdir)/ac/xindy.ac $(top_srcdir)/configure.ac
am__configure_deps = $(am__aclocal_m4_deps) $(CONFIGURE_DEPENDENCIES) \
$(ACLOCAL_M4)
-mkinstalldirs = $(install_sh) -d
+mkinstalldirs = $(SHELL) $(top_srcdir)/../../build-aux/mkinstalldirs
CONFIG_CLEAN_FILES =
SOURCES =
DIST_SOURCES =
diff --git a/Build/source/utils/xindy/rte/ordrules/Makefile.in b/Build/source/utils/xindy/rte/ordrules/Makefile.in
index 2be01a78817..fa29784f947 100644
--- a/Build/source/utils/xindy/rte/ordrules/Makefile.in
+++ b/Build/source/utils/xindy/rte/ordrules/Makefile.in
@@ -41,7 +41,7 @@ am__aclocal_m4_deps = $(top_srcdir)/m4/tl_msg_error.m4 \
$(top_srcdir)/ac/xindy.ac $(top_srcdir)/configure.ac
am__configure_deps = $(am__aclocal_m4_deps) $(CONFIGURE_DEPENDENCIES) \
$(ACLOCAL_M4)
-mkinstalldirs = $(install_sh) -d
+mkinstalldirs = $(SHELL) $(top_srcdir)/../../build-aux/mkinstalldirs
CONFIG_CLEAN_FILES = version.lisp
SOURCES =
DIST_SOURCES =
diff --git a/Build/source/utils/xindy/src/Makefile.in b/Build/source/utils/xindy/src/Makefile.in
index 17e41f18d35..9ba86e55e12 100644
--- a/Build/source/utils/xindy/src/Makefile.in
+++ b/Build/source/utils/xindy/src/Makefile.in
@@ -40,7 +40,7 @@ am__aclocal_m4_deps = $(top_srcdir)/m4/tl_msg_error.m4 \
$(top_srcdir)/ac/xindy.ac $(top_srcdir)/configure.ac
am__configure_deps = $(am__aclocal_m4_deps) $(CONFIGURE_DEPENDENCIES) \
$(ACLOCAL_M4)
-mkinstalldirs = $(install_sh) -d
+mkinstalldirs = $(SHELL) $(top_srcdir)/../../build-aux/mkinstalldirs
CONFIG_CLEAN_FILES =
SOURCES =
DIST_SOURCES =
diff --git a/Build/source/utils/xindy/tex2xindy/Makefile.in b/Build/source/utils/xindy/tex2xindy/Makefile.in
index 33c45ba520a..b31aaa40e0c 100644
--- a/Build/source/utils/xindy/tex2xindy/Makefile.in
+++ b/Build/source/utils/xindy/tex2xindy/Makefile.in
@@ -40,7 +40,7 @@ am__aclocal_m4_deps = $(top_srcdir)/m4/tl_msg_error.m4 \
$(top_srcdir)/ac/xindy.ac $(top_srcdir)/configure.ac
am__configure_deps = $(am__aclocal_m4_deps) $(CONFIGURE_DEPENDENCIES) \
$(ACLOCAL_M4)
-mkinstalldirs = $(install_sh) -d
+mkinstalldirs = $(SHELL) $(top_srcdir)/../../build-aux/mkinstalldirs
CONFIG_CLEAN_FILES =
am__installdirs = "$(DESTDIR)$(bindir)" "$(DESTDIR)$(man1dir)"
binPROGRAMS_INSTALL = $(INSTALL_PROGRAM)
diff --git a/Build/source/utils/xindy/user-commands/Makefile.in b/Build/source/utils/xindy/user-commands/Makefile.in
index 34d496578d3..5e9830c92dc 100644
--- a/Build/source/utils/xindy/user-commands/Makefile.in
+++ b/Build/source/utils/xindy/user-commands/Makefile.in
@@ -40,7 +40,7 @@ am__aclocal_m4_deps = $(top_srcdir)/m4/tl_msg_error.m4 \
$(top_srcdir)/ac/xindy.ac $(top_srcdir)/configure.ac
am__configure_deps = $(am__aclocal_m4_deps) $(CONFIGURE_DEPENDENCIES) \
$(ACLOCAL_M4)
-mkinstalldirs = $(install_sh) -d
+mkinstalldirs = $(SHELL) $(top_srcdir)/../../build-aux/mkinstalldirs
CONFIG_CLEAN_FILES =
am__installdirs = "$(DESTDIR)$(bindir)" "$(DESTDIR)$(bindir)" \
"$(DESTDIR)$(man1dir)"