summaryrefslogtreecommitdiff
path: root/Build/source
diff options
context:
space:
mode:
authorKarl Berry <karl@freefriends.org>2009-08-28 13:56:17 +0000
committerKarl Berry <karl@freefriends.org>2009-08-28 13:56:17 +0000
commit2f43e3eb8fbcc2b9b14bb83694c6dde17c22f6d1 (patch)
treec0340a4fc049e3c95dbd0345a22db2779068a724 /Build/source
parent47876ed420256f4a2c52a4af0b0ae53824b7bcb4 (diff)
xz utils update
git-svn-id: svn://tug.org/texlive/trunk@14912 c570f23f-e606-0410-a88d-b1316a301751
Diffstat (limited to 'Build/source')
-rw-r--r--Build/source/utils/xz-4.999.8beta/AUTHORS18
-rw-r--r--Build/source/utils/xz-4.999.8beta/ChangeLog2
-rw-r--r--Build/source/utils/xz-4.999.8beta/Makefile.am39
-rw-r--r--Build/source/utils/xz-4.999.8beta/README194
-rw-r--r--Build/source/utils/xz-4.999.8beta/THANKS33
-rw-r--r--Build/source/utils/xz-4.999.8beta/aclocal.m47633
-rwxr-xr-xBuild/source/utils/xz-4.999.8beta/configure30016
-rw-r--r--Build/source/utils/xz-4.999.8beta/debug/Makefile.am36
-rw-r--r--Build/source/utils/xz-4.999.8beta/doc/bugs.txt46
-rw-r--r--Build/source/utils/xz-4.999.8beta/lib/Makefile.am32
-rw-r--r--Build/source/utils/xz-4.999.8beta/ltmain.sh6863
-rw-r--r--Build/source/utils/xz-4.999.8beta/src/Makefile.am16
-rw-r--r--Build/source/utils/xz-4.999.8beta/src/common/physmem.h83
-rw-r--r--Build/source/utils/xz-4.999.8beta/src/liblzma/Makefile.am56
-rw-r--r--Build/source/utils/xz-4.999.8beta/src/liblzma/Makefile.in631
-rw-r--r--Build/source/utils/xz-4.999.8beta/src/liblzma/api/Makefile.am30
-rw-r--r--Build/source/utils/xz-4.999.8beta/src/liblzma/api/lzma/version.h59
-rw-r--r--Build/source/utils/xz-4.999.8beta/src/liblzma/check/Makefile.am54
-rw-r--r--Build/source/utils/xz-4.999.8beta/src/liblzma/check/Makefile.in605
-rw-r--r--Build/source/utils/xz-4.999.8beta/src/liblzma/common/Makefile.am80
-rw-r--r--Build/source/utils/xz-4.999.8beta/src/liblzma/common/Makefile.in823
-rw-r--r--Build/source/utils/xz-4.999.8beta/src/liblzma/common/alone_decoder.h29
-rw-r--r--Build/source/utils/xz-4.999.8beta/src/liblzma/common/block_decoder.h29
-rw-r--r--Build/source/utils/xz-4.999.8beta/src/liblzma/common/filter_decoder.h30
-rw-r--r--Build/source/utils/xz-4.999.8beta/src/liblzma/common/index_encoder.h30
-rw-r--r--Build/source/utils/xz-4.999.8beta/src/liblzma/common/stream_decoder.h28
-rw-r--r--Build/source/utils/xz-4.999.8beta/src/liblzma/common/stream_encoder.h30
-rw-r--r--Build/source/utils/xz-4.999.8beta/src/liblzma/common/vli_size.c37
-rw-r--r--Build/source/utils/xz-4.999.8beta/src/liblzma/delta/Makefile.am35
-rw-r--r--Build/source/utils/xz-4.999.8beta/src/liblzma/delta/Makefile.in505
-rw-r--r--Build/source/utils/xz-4.999.8beta/src/liblzma/delta/delta_common.h27
-rw-r--r--Build/source/utils/xz-4.999.8beta/src/liblzma/delta/delta_encoder.h30
-rw-r--r--Build/source/utils/xz-4.999.8beta/src/liblzma/lz/Makefile.am36
-rw-r--r--Build/source/utils/xz-4.999.8beta/src/liblzma/lz/Makefile.in506
-rw-r--r--Build/source/utils/xz-4.999.8beta/src/liblzma/lzma/Makefile.am58
-rw-r--r--Build/source/utils/xz-4.999.8beta/src/liblzma/lzma/Makefile.in570
-rw-r--r--Build/source/utils/xz-4.999.8beta/src/liblzma/rangecoder/Makefile.am33
-rw-r--r--Build/source/utils/xz-4.999.8beta/src/liblzma/rangecoder/Makefile.in487
-rw-r--r--Build/source/utils/xz-4.999.8beta/src/liblzma/simple/Makefile.am58
-rw-r--r--Build/source/utils/xz-4.999.8beta/src/liblzma/simple/Makefile.in572
-rw-r--r--Build/source/utils/xz-4.999.8beta/src/liblzma/simple/simple_decoder.h29
-rw-r--r--Build/source/utils/xz-4.999.8beta/src/liblzma/simple/simple_encoder.h30
-rw-r--r--Build/source/utils/xz-4.999.8beta/src/liblzma/subblock/Makefile.am33
-rw-r--r--Build/source/utils/xz-4.999.8beta/src/liblzma/subblock/Makefile.in506
-rw-r--r--Build/source/utils/xz-4.999.8beta/src/liblzma/subblock/subblock_decoder.h29
-rw-r--r--Build/source/utils/xz-4.999.8beta/src/liblzma/subblock/subblock_encoder.h28
-rw-r--r--Build/source/utils/xz-4.999.8beta/src/scripts/Makefile.am24
-rw-r--r--Build/source/utils/xz-4.999.8beta/src/scripts/Makefile.in464
-rwxr-xr-xBuild/source/utils/xz-4.999.8beta/src/scripts/lzdiff67
-rw-r--r--Build/source/utils/xz-4.999.8beta/src/scripts/lzdiff.151
-rwxr-xr-xBuild/source/utils/xz-4.999.8beta/src/scripts/lzgrep123
-rw-r--r--Build/source/utils/xz-4.999.8beta/src/scripts/lzgrep.161
-rwxr-xr-xBuild/source/utils/xz-4.999.8beta/src/scripts/lzmore74
-rw-r--r--Build/source/utils/xz-4.999.8beta/src/scripts/lzmore.155
-rw-r--r--Build/source/utils/xz-4.999.8beta/src/xz/Makefile.am73
-rw-r--r--Build/source/utils/xz-4.999.8beta/src/xz/hardware.c122
-rw-r--r--Build/source/utils/xz-4.999.8beta/src/xz/hardware.h37
-rw-r--r--Build/source/utils/xz-4.999.8beta/src/xzdec/Makefile.am34
-rw-r--r--Build/source/utils/xz-4.999.8beta/tests/Makefile.am53
-rwxr-xr-xBuild/source/utils/xz-4.999.8beta/tests/test_files.sh40
-rw-r--r--Build/source/utils/xz-4.999.9beta/ABOUT-NLS (renamed from Build/source/utils/xz-4.999.8beta/ABOUT-NLS)0
-rw-r--r--Build/source/utils/xz-4.999.9beta/AUTHORS27
-rw-r--r--Build/source/utils/xz-4.999.9beta/COPYING (renamed from Build/source/utils/xz-4.999.8beta/COPYING)33
-rw-r--r--Build/source/utils/xz-4.999.9beta/COPYING.GPLv2 (renamed from Build/source/utils/xz-4.999.8beta/COPYING.GPLv2)0
-rw-r--r--Build/source/utils/xz-4.999.9beta/COPYING.GPLv3 (renamed from Build/source/utils/xz-4.999.8beta/COPYING.GPLv3)0
-rw-r--r--Build/source/utils/xz-4.999.9beta/COPYING.LGPLv2.1 (renamed from Build/source/utils/xz-4.999.8beta/COPYING.LGPLv2.1)0
-rw-r--r--Build/source/utils/xz-4.999.9beta/ChangeLog7041
-rw-r--r--Build/source/utils/xz-4.999.9beta/Doxyfile.in (renamed from Build/source/utils/xz-4.999.8beta/Doxyfile.in)11
-rw-r--r--Build/source/utils/xz-4.999.9beta/INSTALL339
-rw-r--r--Build/source/utils/xz-4.999.9beta/INSTALL.generic (renamed from Build/source/utils/xz-4.999.8beta/INSTALL)156
-rw-r--r--Build/source/utils/xz-4.999.9beta/Makefile.am80
-rw-r--r--Build/source/utils/xz-4.999.9beta/Makefile.in (renamed from Build/source/utils/xz-4.999.8beta/Makefile.in)368
-rw-r--r--Build/source/utils/xz-4.999.9beta/NEWS (renamed from Build/source/utils/xz-4.999.8beta/NEWS)0
-rw-r--r--Build/source/utils/xz-4.999.9beta/PACKAGERS279
-rw-r--r--Build/source/utils/xz-4.999.9beta/README217
-rw-r--r--Build/source/utils/xz-4.999.9beta/THANKS47
-rw-r--r--Build/source/utils/xz-4.999.9beta/TODO56
-rw-r--r--Build/source/utils/xz-4.999.9beta/aclocal.m41027
-rwxr-xr-xBuild/source/utils/xz-4.999.9beta/autogen.sh22
-rwxr-xr-xBuild/source/utils/xz-4.999.9beta/build-aux/compile (renamed from Build/source/utils/xz-4.999.8beta/compile)17
-rwxr-xr-xBuild/source/utils/xz-4.999.9beta/build-aux/config.guess (renamed from Build/source/utils/xz-4.999.8beta/config.guess)68
-rwxr-xr-xBuild/source/utils/xz-4.999.9beta/build-aux/config.rpath (renamed from Build/source/utils/xz-4.999.8beta/config.rpath)0
-rwxr-xr-xBuild/source/utils/xz-4.999.9beta/build-aux/config.sub (renamed from Build/source/utils/xz-4.999.8beta/config.sub)27
-rwxr-xr-xBuild/source/utils/xz-4.999.9beta/build-aux/depcomp (renamed from Build/source/utils/xz-4.999.8beta/depcomp)0
-rwxr-xr-xBuild/source/utils/xz-4.999.9beta/build-aux/install-sh (renamed from Build/source/utils/xz-4.999.8beta/install-sh)0
-rwxr-xr-xBuild/source/utils/xz-4.999.9beta/build-aux/ltmain.sh8406
-rwxr-xr-xBuild/source/utils/xz-4.999.9beta/build-aux/missing (renamed from Build/source/utils/xz-4.999.8beta/missing)0
-rw-r--r--Build/source/utils/xz-4.999.9beta/config.h.in (renamed from Build/source/utils/xz-4.999.8beta/config.h.in)104
-rwxr-xr-xBuild/source/utils/xz-4.999.9beta/configure19363
-rw-r--r--Build/source/utils/xz-4.999.9beta/configure.ac (renamed from Build/source/utils/xz-4.999.8beta/configure.ac)360
-rw-r--r--Build/source/utils/xz-4.999.9beta/debug/Makefile.am30
-rw-r--r--Build/source/utils/xz-4.999.9beta/debug/Makefile.in (renamed from Build/source/utils/xz-4.999.8beta/debug/Makefile.in)171
-rw-r--r--Build/source/utils/xz-4.999.9beta/debug/README (renamed from Build/source/utils/xz-4.999.8beta/debug/README)0
-rw-r--r--Build/source/utils/xz-4.999.9beta/debug/crc32.c (renamed from Build/source/utils/xz-4.999.8beta/debug/crc32.c)13
-rw-r--r--Build/source/utils/xz-4.999.9beta/debug/full_flush.c (renamed from Build/source/utils/xz-4.999.8beta/debug/full_flush.c)14
-rw-r--r--Build/source/utils/xz-4.999.9beta/debug/hex2bin.c (renamed from Build/source/utils/xz-4.999.8beta/debug/hex2bin.c)7
-rw-r--r--Build/source/utils/xz-4.999.9beta/debug/known_sizes.c (renamed from Build/source/utils/xz-4.999.8beta/debug/known_sizes.c)14
-rw-r--r--Build/source/utils/xz-4.999.9beta/debug/memusage.c (renamed from Build/source/utils/xz-4.999.8beta/debug/memusage.c)14
-rw-r--r--Build/source/utils/xz-4.999.9beta/debug/repeat.c (renamed from Build/source/utils/xz-4.999.8beta/debug/repeat.c)13
-rw-r--r--Build/source/utils/xz-4.999.9beta/debug/sync_flush.c (renamed from Build/source/utils/xz-4.999.8beta/debug/sync_flush.c)14
-rw-r--r--Build/source/utils/xz-4.999.9beta/doc/faq.txt122
-rw-r--r--Build/source/utils/xz-4.999.9beta/doc/history.txt149
-rw-r--r--Build/source/utils/xz-4.999.9beta/doc/lzma-file-format.txt166
-rw-r--r--Build/source/utils/xz-4.999.9beta/doc/man/pdf-a4/xz-a4.pdfbin0 -> 38867 bytes
-rw-r--r--Build/source/utils/xz-4.999.9beta/doc/man/pdf-a4/xzdec-a4.pdfbin0 -> 6914 bytes
-rw-r--r--Build/source/utils/xz-4.999.9beta/doc/man/pdf-a4/xzdiff-a4.pdfbin0 -> 4240 bytes
-rw-r--r--Build/source/utils/xz-4.999.9beta/doc/man/pdf-a4/xzgrep-a4.pdfbin0 -> 4443 bytes
-rw-r--r--Build/source/utils/xz-4.999.9beta/doc/man/pdf-a4/xzless-a4.pdfbin0 -> 4329 bytes
-rw-r--r--Build/source/utils/xz-4.999.9beta/doc/man/pdf-a4/xzmore-a4.pdfbin0 -> 4211 bytes
-rw-r--r--Build/source/utils/xz-4.999.9beta/doc/man/pdf-letter/xz-letter.pdfbin0 -> 38846 bytes
-rw-r--r--Build/source/utils/xz-4.999.9beta/doc/man/pdf-letter/xzdec-letter.pdfbin0 -> 6909 bytes
-rw-r--r--Build/source/utils/xz-4.999.9beta/doc/man/pdf-letter/xzdiff-letter.pdfbin0 -> 4239 bytes
-rw-r--r--Build/source/utils/xz-4.999.9beta/doc/man/pdf-letter/xzgrep-letter.pdfbin0 -> 4440 bytes
-rw-r--r--Build/source/utils/xz-4.999.9beta/doc/man/pdf-letter/xzless-letter.pdfbin0 -> 4326 bytes
-rw-r--r--Build/source/utils/xz-4.999.9beta/doc/man/pdf-letter/xzmore-letter.pdfbin0 -> 4210 bytes
-rw-r--r--Build/source/utils/xz-4.999.9beta/doc/man/txt/xz.txt786
-rw-r--r--Build/source/utils/xz-4.999.9beta/doc/man/txt/xzdec.txt95
-rw-r--r--Build/source/utils/xz-4.999.9beta/doc/man/txt/xzdiff.txt36
-rw-r--r--Build/source/utils/xz-4.999.9beta/doc/man/txt/xzgrep.txt39
-rw-r--r--Build/source/utils/xz-4.999.9beta/doc/man/txt/xzless.txt40
-rw-r--r--Build/source/utils/xz-4.999.9beta/doc/man/txt/xzmore.txt34
-rw-r--r--Build/source/utils/xz-4.999.9beta/doc/xz-file-format.txt (renamed from Build/source/utils/xz-4.999.8beta/doc/file-format.txt)69
-rw-r--r--Build/source/utils/xz-4.999.9beta/dos/Makefile255
-rw-r--r--Build/source/utils/xz-4.999.9beta/dos/README113
-rw-r--r--Build/source/utils/xz-4.999.9beta/dos/config.h150
-rwxr-xr-xBuild/source/utils/xz-4.999.9beta/extra/7z2lzma/7z2lzma.bash (renamed from Build/source/utils/xz-4.999.8beta/extra/7z2lzma/7z2lzma.bash)0
-rw-r--r--Build/source/utils/xz-4.999.9beta/extra/scanlzma/scanlzma.c (renamed from Build/source/utils/xz-4.999.8beta/extra/scanlzma/scanlzma.c)0
-rw-r--r--Build/source/utils/xz-4.999.9beta/lib/Makefile.am32
-rw-r--r--Build/source/utils/xz-4.999.9beta/lib/Makefile.in (renamed from Build/source/utils/xz-4.999.8beta/lib/Makefile.in)119
-rw-r--r--Build/source/utils/xz-4.999.9beta/lib/getopt.c (renamed from Build/source/utils/xz-4.999.8beta/lib/getopt.c)0
-rw-r--r--Build/source/utils/xz-4.999.9beta/lib/getopt.in.h (renamed from Build/source/utils/xz-4.999.8beta/lib/getopt.in.h)0
-rw-r--r--Build/source/utils/xz-4.999.9beta/lib/getopt1.c (renamed from Build/source/utils/xz-4.999.8beta/lib/getopt1.c)0
-rw-r--r--Build/source/utils/xz-4.999.9beta/lib/getopt_int.h (renamed from Build/source/utils/xz-4.999.8beta/lib/getopt_int.h)0
-rw-r--r--Build/source/utils/xz-4.999.9beta/m4/acx_pthread.m4 (renamed from Build/source/utils/xz-4.999.8beta/m4/acx_pthread.m4)0
-rw-r--r--Build/source/utils/xz-4.999.9beta/m4/getopt.m4 (renamed from Build/source/utils/xz-4.999.8beta/m4/getopt.m4)4
-rw-r--r--Build/source/utils/xz-4.999.9beta/m4/gettext.m4 (renamed from Build/source/utils/xz-4.999.8beta/m4/gettext.m4)0
-rw-r--r--Build/source/utils/xz-4.999.9beta/m4/iconv.m4 (renamed from Build/source/utils/xz-4.999.8beta/m4/iconv.m4)0
-rw-r--r--Build/source/utils/xz-4.999.9beta/m4/lc_cpucores.m457
-rw-r--r--Build/source/utils/xz-4.999.9beta/m4/lc_physmem.m484
-rw-r--r--Build/source/utils/xz-4.999.9beta/m4/lib-ld.m4 (renamed from Build/source/utils/xz-4.999.8beta/m4/lib-ld.m4)0
-rw-r--r--Build/source/utils/xz-4.999.9beta/m4/lib-link.m4 (renamed from Build/source/utils/xz-4.999.8beta/m4/lib-link.m4)0
-rw-r--r--Build/source/utils/xz-4.999.9beta/m4/lib-prefix.m4 (renamed from Build/source/utils/xz-4.999.8beta/m4/lib-prefix.m4)0
-rw-r--r--Build/source/utils/xz-4.999.9beta/m4/libtool.m47357
-rw-r--r--Build/source/utils/xz-4.999.9beta/m4/ltoptions.m4368
-rw-r--r--Build/source/utils/xz-4.999.9beta/m4/ltsugar.m4123
-rw-r--r--Build/source/utils/xz-4.999.9beta/m4/ltversion.m423
-rw-r--r--Build/source/utils/xz-4.999.9beta/m4/lt~obsolete.m492
-rw-r--r--Build/source/utils/xz-4.999.9beta/m4/nls.m4 (renamed from Build/source/utils/xz-4.999.8beta/m4/nls.m4)0
-rw-r--r--Build/source/utils/xz-4.999.9beta/m4/po.m4 (renamed from Build/source/utils/xz-4.999.8beta/m4/po.m4)0
-rw-r--r--Build/source/utils/xz-4.999.9beta/m4/posix-shell.m463
-rw-r--r--Build/source/utils/xz-4.999.9beta/m4/progtest.m4 (renamed from Build/source/utils/xz-4.999.8beta/m4/progtest.m4)0
-rw-r--r--Build/source/utils/xz-4.999.9beta/m4/visibility.m452
-rw-r--r--Build/source/utils/xz-4.999.9beta/po/LINGUAS (renamed from Build/source/utils/xz-4.999.8beta/po/LINGUAS)0
-rw-r--r--Build/source/utils/xz-4.999.9beta/po/Makefile.in.in (renamed from Build/source/utils/xz-4.999.8beta/po/Makefile.in.in)0
-rw-r--r--Build/source/utils/xz-4.999.9beta/po/Makevars (renamed from Build/source/utils/xz-4.999.8beta/po/Makevars)0
-rw-r--r--Build/source/utils/xz-4.999.9beta/po/POTFILES.in (renamed from Build/source/utils/xz-4.999.8beta/po/POTFILES.in)4
-rw-r--r--Build/source/utils/xz-4.999.9beta/po/Rules-quot (renamed from Build/source/utils/xz-4.999.8beta/po/Rules-quot)0
-rw-r--r--Build/source/utils/xz-4.999.9beta/po/boldquot.sed (renamed from Build/source/utils/xz-4.999.8beta/po/boldquot.sed)0
-rw-r--r--Build/source/utils/xz-4.999.9beta/po/en@boldquot.header (renamed from Build/source/utils/xz-4.999.8beta/po/en@boldquot.header)0
-rw-r--r--Build/source/utils/xz-4.999.9beta/po/en@quot.header (renamed from Build/source/utils/xz-4.999.8beta/po/en@quot.header)0
-rw-r--r--Build/source/utils/xz-4.999.9beta/po/insert-header.sin (renamed from Build/source/utils/xz-4.999.8beta/po/insert-header.sin)0
-rw-r--r--Build/source/utils/xz-4.999.9beta/po/quot.sed (renamed from Build/source/utils/xz-4.999.8beta/po/quot.sed)0
-rw-r--r--Build/source/utils/xz-4.999.9beta/po/remove-potcdate.sin (renamed from Build/source/utils/xz-4.999.8beta/po/remove-potcdate.sin)0
-rw-r--r--Build/source/utils/xz-4.999.9beta/po/stamp-po (renamed from Build/source/utils/xz-4.999.8beta/po/stamp-po)0
-rw-r--r--Build/source/utils/xz-4.999.9beta/po/xz.pot (renamed from Build/source/utils/xz-4.999.8beta/po/xz.pot)270
-rw-r--r--Build/source/utils/xz-4.999.9beta/src/Makefile.am9
-rw-r--r--Build/source/utils/xz-4.999.9beta/src/Makefile.in (renamed from Build/source/utils/xz-4.999.8beta/src/Makefile.in)175
-rw-r--r--Build/source/utils/xz-4.999.9beta/src/common/bswap.h (renamed from Build/source/utils/xz-4.999.8beta/src/common/bswap.h)7
-rw-r--r--Build/source/utils/xz-4.999.9beta/src/common/common_w32res.rc53
-rw-r--r--Build/source/utils/xz-4.999.9beta/src/common/cpucores.h51
-rw-r--r--Build/source/utils/xz-4.999.9beta/src/common/integer.h (renamed from Build/source/utils/xz-4.999.8beta/src/common/integer.h)7
-rw-r--r--Build/source/utils/xz-4.999.9beta/src/common/mythread.h (renamed from Build/source/utils/xz-4.999.8beta/src/common/mythread.h)4
-rw-r--r--Build/source/utils/xz-4.999.9beta/src/common/open_stdxxx.h (renamed from Build/source/utils/xz-4.999.8beta/src/common/open_stdxxx.h)7
-rw-r--r--Build/source/utils/xz-4.999.9beta/src/common/physmem.h134
-rw-r--r--Build/source/utils/xz-4.999.9beta/src/common/sysdefs.h (renamed from Build/source/utils/xz-4.999.8beta/src/common/sysdefs.h)17
-rw-r--r--Build/source/utils/xz-4.999.9beta/src/liblzma/Makefile.am94
-rw-r--r--Build/source/utils/xz-4.999.9beta/src/liblzma/Makefile.in1728
-rw-r--r--Build/source/utils/xz-4.999.9beta/src/liblzma/api/Makefile.am23
-rw-r--r--Build/source/utils/xz-4.999.9beta/src/liblzma/api/Makefile.in (renamed from Build/source/utils/xz-4.999.8beta/src/liblzma/api/Makefile.in)154
-rw-r--r--Build/source/utils/xz-4.999.9beta/src/liblzma/api/lzma.h (renamed from Build/source/utils/xz-4.999.8beta/src/liblzma/api/lzma.h)92
-rw-r--r--Build/source/utils/xz-4.999.9beta/src/liblzma/api/lzma/base.h (renamed from Build/source/utils/xz-4.999.8beta/src/liblzma/api/lzma/base.h)68
-rw-r--r--Build/source/utils/xz-4.999.9beta/src/liblzma/api/lzma/bcj.h (renamed from Build/source/utils/xz-4.999.8beta/src/liblzma/api/lzma/bcj.h)18
-rw-r--r--Build/source/utils/xz-4.999.9beta/src/liblzma/api/lzma/block.h (renamed from Build/source/utils/xz-4.999.8beta/src/liblzma/api/lzma/block.h)71
-rw-r--r--Build/source/utils/xz-4.999.9beta/src/liblzma/api/lzma/check.h (renamed from Build/source/utils/xz-4.999.8beta/src/liblzma/api/lzma/check.h)40
-rw-r--r--Build/source/utils/xz-4.999.9beta/src/liblzma/api/lzma/container.h (renamed from Build/source/utils/xz-4.999.8beta/src/liblzma/api/lzma/container.h)85
-rw-r--r--Build/source/utils/xz-4.999.9beta/src/liblzma/api/lzma/delta.h (renamed from Build/source/utils/xz-4.999.8beta/src/liblzma/api/lzma/delta.h)18
-rw-r--r--Build/source/utils/xz-4.999.9beta/src/liblzma/api/lzma/filter.h (renamed from Build/source/utils/xz-4.999.8beta/src/liblzma/api/lzma/filter.h)99
-rw-r--r--Build/source/utils/xz-4.999.9beta/src/liblzma/api/lzma/index.h (renamed from Build/source/utils/xz-4.999.8beta/src/liblzma/api/lzma/index.h)115
-rw-r--r--Build/source/utils/xz-4.999.9beta/src/liblzma/api/lzma/index_hash.h (renamed from Build/source/utils/xz-4.999.8beta/src/liblzma/api/lzma/index_hash.h)34
-rw-r--r--Build/source/utils/xz-4.999.9beta/src/liblzma/api/lzma/lzma.h (renamed from Build/source/utils/xz-4.999.8beta/src/liblzma/api/lzma/lzma.h)105
-rw-r--r--Build/source/utils/xz-4.999.9beta/src/liblzma/api/lzma/stream_flags.h (renamed from Build/source/utils/xz-4.999.8beta/src/liblzma/api/lzma/stream_flags.h)30
-rw-r--r--Build/source/utils/xz-4.999.9beta/src/liblzma/api/lzma/subblock.h (renamed from Build/source/utils/xz-4.999.8beta/src/liblzma/api/lzma/subblock.h)18
-rw-r--r--Build/source/utils/xz-4.999.9beta/src/liblzma/api/lzma/version.h121
-rw-r--r--Build/source/utils/xz-4.999.9beta/src/liblzma/api/lzma/vli.h (renamed from Build/source/utils/xz-4.999.8beta/src/liblzma/api/lzma/vli.h)53
-rw-r--r--Build/source/utils/xz-4.999.9beta/src/liblzma/check/Makefile.inc51
-rw-r--r--Build/source/utils/xz-4.999.9beta/src/liblzma/check/check.c (renamed from Build/source/utils/xz-4.999.8beta/src/liblzma/check/check.c)7
-rw-r--r--Build/source/utils/xz-4.999.9beta/src/liblzma/check/check.h (renamed from Build/source/utils/xz-4.999.8beta/src/liblzma/check/check.h)8
-rw-r--r--Build/source/utils/xz-4.999.9beta/src/liblzma/check/crc32_fast.c (renamed from Build/source/utils/xz-4.999.8beta/src/liblzma/check/crc32_fast.c)30
-rw-r--r--Build/source/utils/xz-4.999.9beta/src/liblzma/check/crc32_small.c (renamed from Build/source/utils/xz-4.999.8beta/src/liblzma/check/crc32_small.c)17
-rw-r--r--Build/source/utils/xz-4.999.9beta/src/liblzma/check/crc32_table.c (renamed from Build/source/utils/xz-4.999.8beta/src/liblzma/check/crc32_table.c)7
-rw-r--r--Build/source/utils/xz-4.999.9beta/src/liblzma/check/crc32_table_be.h (renamed from Build/source/utils/xz-4.999.8beta/src/liblzma/check/crc32_table_be.h)0
-rw-r--r--Build/source/utils/xz-4.999.9beta/src/liblzma/check/crc32_table_le.h (renamed from Build/source/utils/xz-4.999.8beta/src/liblzma/check/crc32_table_le.h)0
-rw-r--r--Build/source/utils/xz-4.999.9beta/src/liblzma/check/crc32_tablegen.c (renamed from Build/source/utils/xz-4.999.8beta/src/liblzma/check/crc32_tablegen.c)7
-rw-r--r--Build/source/utils/xz-4.999.9beta/src/liblzma/check/crc32_x86.S (renamed from Build/source/utils/xz-4.999.8beta/src/liblzma/check/crc32_x86.S)42
-rw-r--r--Build/source/utils/xz-4.999.9beta/src/liblzma/check/crc64_fast.c (renamed from Build/source/utils/xz-4.999.8beta/src/liblzma/check/crc64_fast.c)20
-rw-r--r--Build/source/utils/xz-4.999.9beta/src/liblzma/check/crc64_small.c (renamed from Build/source/utils/xz-4.999.8beta/src/liblzma/check/crc64_small.c)7
-rw-r--r--Build/source/utils/xz-4.999.9beta/src/liblzma/check/crc64_table.c (renamed from Build/source/utils/xz-4.999.8beta/src/liblzma/check/crc64_table.c)7
-rw-r--r--Build/source/utils/xz-4.999.9beta/src/liblzma/check/crc64_table_be.h (renamed from Build/source/utils/xz-4.999.8beta/src/liblzma/check/crc64_table_be.h)0
-rw-r--r--Build/source/utils/xz-4.999.9beta/src/liblzma/check/crc64_table_le.h (renamed from Build/source/utils/xz-4.999.8beta/src/liblzma/check/crc64_table_le.h)0
-rw-r--r--Build/source/utils/xz-4.999.9beta/src/liblzma/check/crc64_tablegen.c (renamed from Build/source/utils/xz-4.999.8beta/src/liblzma/check/crc64_tablegen.c)7
-rw-r--r--Build/source/utils/xz-4.999.9beta/src/liblzma/check/crc64_x86.S (renamed from Build/source/utils/xz-4.999.8beta/src/liblzma/check/crc64_x86.S)33
-rw-r--r--Build/source/utils/xz-4.999.9beta/src/liblzma/check/crc_macros.h (renamed from Build/source/utils/xz-4.999.8beta/src/liblzma/check/crc_macros.h)9
-rw-r--r--Build/source/utils/xz-4.999.9beta/src/liblzma/check/sha256.c (renamed from Build/source/utils/xz-4.999.8beta/src/liblzma/check/sha256.c)28
-rw-r--r--Build/source/utils/xz-4.999.9beta/src/liblzma/common/Makefile.inc67
-rw-r--r--Build/source/utils/xz-4.999.9beta/src/liblzma/common/alone_decoder.c (renamed from Build/source/utils/xz-4.999.8beta/src/liblzma/common/alone_decoder.c)15
-rw-r--r--Build/source/utils/xz-4.999.9beta/src/liblzma/common/alone_decoder.h22
-rw-r--r--Build/source/utils/xz-4.999.9beta/src/liblzma/common/alone_encoder.c (renamed from Build/source/utils/xz-4.999.8beta/src/liblzma/common/alone_encoder.c)17
-rw-r--r--Build/source/utils/xz-4.999.9beta/src/liblzma/common/auto_decoder.c (renamed from Build/source/utils/xz-4.999.8beta/src/liblzma/common/auto_decoder.c)15
-rw-r--r--Build/source/utils/xz-4.999.9beta/src/liblzma/common/block_buffer_decoder.c (renamed from Build/source/utils/xz-4.999.8beta/src/liblzma/common/block_buffer_decoder.c)13
-rw-r--r--Build/source/utils/xz-4.999.9beta/src/liblzma/common/block_buffer_encoder.c (renamed from Build/source/utils/xz-4.999.8beta/src/liblzma/common/block_buffer_encoder.c)14
-rw-r--r--Build/source/utils/xz-4.999.9beta/src/liblzma/common/block_decoder.c (renamed from Build/source/utils/xz-4.999.8beta/src/liblzma/common/block_decoder.c)49
-rw-r--r--Build/source/utils/xz-4.999.9beta/src/liblzma/common/block_decoder.h22
-rw-r--r--Build/source/utils/xz-4.999.9beta/src/liblzma/common/block_encoder.c (renamed from Build/source/utils/xz-4.999.8beta/src/liblzma/common/block_encoder.c)36
-rw-r--r--Build/source/utils/xz-4.999.9beta/src/liblzma/common/block_encoder.h (renamed from Build/source/utils/xz-4.999.8beta/src/liblzma/common/block_encoder.h)13
-rw-r--r--Build/source/utils/xz-4.999.9beta/src/liblzma/common/block_header_decoder.c (renamed from Build/source/utils/xz-4.999.8beta/src/liblzma/common/block_header_decoder.c)13
-rw-r--r--Build/source/utils/xz-4.999.9beta/src/liblzma/common/block_header_encoder.c (renamed from Build/source/utils/xz-4.999.8beta/src/liblzma/common/block_header_encoder.c)13
-rw-r--r--Build/source/utils/xz-4.999.9beta/src/liblzma/common/block_util.c (renamed from Build/source/utils/xz-4.999.8beta/src/liblzma/common/block_util.c)13
-rw-r--r--Build/source/utils/xz-4.999.9beta/src/liblzma/common/bsr.h (renamed from Build/source/utils/xz-4.999.8beta/src/liblzma/common/bsr.h)7
-rw-r--r--Build/source/utils/xz-4.999.9beta/src/liblzma/common/common.c (renamed from Build/source/utils/xz-4.999.8beta/src/liblzma/common/common.c)15
-rw-r--r--Build/source/utils/xz-4.999.9beta/src/liblzma/common/common.h (renamed from Build/source/utils/xz-4.999.8beta/src/liblzma/common/common.h)31
-rw-r--r--Build/source/utils/xz-4.999.9beta/src/liblzma/common/easy_buffer_encoder.c27
-rw-r--r--Build/source/utils/xz-4.999.9beta/src/liblzma/common/easy_decoder_memusage.c24
-rw-r--r--Build/source/utils/xz-4.999.9beta/src/liblzma/common/easy_encoder.c (renamed from Build/source/utils/xz-4.999.8beta/src/liblzma/common/easy.c)68
-rw-r--r--Build/source/utils/xz-4.999.9beta/src/liblzma/common/easy_encoder_memusage.c24
-rw-r--r--Build/source/utils/xz-4.999.9beta/src/liblzma/common/easy_preset.c27
-rw-r--r--Build/source/utils/xz-4.999.9beta/src/liblzma/common/easy_preset.h32
-rw-r--r--Build/source/utils/xz-4.999.9beta/src/liblzma/common/filter_buffer_decoder.c (renamed from Build/source/utils/xz-4.999.8beta/src/liblzma/common/filter_buffer_decoder.c)13
-rw-r--r--Build/source/utils/xz-4.999.9beta/src/liblzma/common/filter_buffer_encoder.c (renamed from Build/source/utils/xz-4.999.8beta/src/liblzma/common/filter_buffer_encoder.c)13
-rw-r--r--Build/source/utils/xz-4.999.9beta/src/liblzma/common/filter_common.c (renamed from Build/source/utils/xz-4.999.8beta/src/liblzma/common/filter_common.c)13
-rw-r--r--Build/source/utils/xz-4.999.9beta/src/liblzma/common/filter_common.h (renamed from Build/source/utils/xz-4.999.8beta/src/liblzma/common/filter_common.h)13
-rw-r--r--Build/source/utils/xz-4.999.9beta/src/liblzma/common/filter_decoder.c (renamed from Build/source/utils/xz-4.999.8beta/src/liblzma/common/filter_decoder.c)13
-rw-r--r--Build/source/utils/xz-4.999.9beta/src/liblzma/common/filter_decoder.h23
-rw-r--r--Build/source/utils/xz-4.999.9beta/src/liblzma/common/filter_encoder.c (renamed from Build/source/utils/xz-4.999.8beta/src/liblzma/common/filter_encoder.c)13
-rw-r--r--Build/source/utils/xz-4.999.9beta/src/liblzma/common/filter_encoder.h (renamed from Build/source/utils/xz-4.999.8beta/src/liblzma/common/filter_encoder.h)13
-rw-r--r--Build/source/utils/xz-4.999.9beta/src/liblzma/common/filter_flags_decoder.c (renamed from Build/source/utils/xz-4.999.8beta/src/liblzma/common/filter_flags_decoder.c)13
-rw-r--r--Build/source/utils/xz-4.999.9beta/src/liblzma/common/filter_flags_encoder.c (renamed from Build/source/utils/xz-4.999.8beta/src/liblzma/common/filter_flags_encoder.c)13
-rw-r--r--Build/source/utils/xz-4.999.9beta/src/liblzma/common/index.c (renamed from Build/source/utils/xz-4.999.8beta/src/liblzma/common/index.c)13
-rw-r--r--Build/source/utils/xz-4.999.9beta/src/liblzma/common/index.h (renamed from Build/source/utils/xz-4.999.8beta/src/liblzma/common/index.h)13
-rw-r--r--Build/source/utils/xz-4.999.9beta/src/liblzma/common/index_decoder.c (renamed from Build/source/utils/xz-4.999.8beta/src/liblzma/common/index_decoder.c)15
-rw-r--r--Build/source/utils/xz-4.999.9beta/src/liblzma/common/index_encoder.c (renamed from Build/source/utils/xz-4.999.8beta/src/liblzma/common/index_encoder.c)15
-rw-r--r--Build/source/utils/xz-4.999.9beta/src/liblzma/common/index_encoder.h23
-rw-r--r--Build/source/utils/xz-4.999.9beta/src/liblzma/common/index_hash.c (renamed from Build/source/utils/xz-4.999.8beta/src/liblzma/common/index_hash.c)13
-rw-r--r--Build/source/utils/xz-4.999.9beta/src/liblzma/common/stream_buffer_decoder.c (renamed from Build/source/utils/xz-4.999.8beta/src/liblzma/common/stream_buffer_decoder.c)13
-rw-r--r--Build/source/utils/xz-4.999.9beta/src/liblzma/common/stream_buffer_encoder.c (renamed from Build/source/utils/xz-4.999.8beta/src/liblzma/common/stream_buffer_encoder.c)13
-rw-r--r--Build/source/utils/xz-4.999.9beta/src/liblzma/common/stream_decoder.c (renamed from Build/source/utils/xz-4.999.8beta/src/liblzma/common/stream_decoder.c)15
-rw-r--r--Build/source/utils/xz-4.999.9beta/src/liblzma/common/stream_decoder.h21
-rw-r--r--Build/source/utils/xz-4.999.9beta/src/liblzma/common/stream_encoder.c (renamed from Build/source/utils/xz-4.999.8beta/src/liblzma/common/stream_encoder.c)15
-rw-r--r--Build/source/utils/xz-4.999.9beta/src/liblzma/common/stream_encoder.h23
-rw-r--r--Build/source/utils/xz-4.999.9beta/src/liblzma/common/stream_flags_common.c (renamed from Build/source/utils/xz-4.999.8beta/src/liblzma/common/stream_flags_common.c)13
-rw-r--r--Build/source/utils/xz-4.999.9beta/src/liblzma/common/stream_flags_common.h (renamed from Build/source/utils/xz-4.999.8beta/src/liblzma/common/stream_flags_common.h)13
-rw-r--r--Build/source/utils/xz-4.999.9beta/src/liblzma/common/stream_flags_decoder.c (renamed from Build/source/utils/xz-4.999.8beta/src/liblzma/common/stream_flags_decoder.c)13
-rw-r--r--Build/source/utils/xz-4.999.9beta/src/liblzma/common/stream_flags_encoder.c (renamed from Build/source/utils/xz-4.999.8beta/src/liblzma/common/stream_flags_encoder.c)13
-rw-r--r--Build/source/utils/xz-4.999.9beta/src/liblzma/common/vli_decoder.c (renamed from Build/source/utils/xz-4.999.8beta/src/liblzma/common/vli_decoder.c)13
-rw-r--r--Build/source/utils/xz-4.999.9beta/src/liblzma/common/vli_encoder.c (renamed from Build/source/utils/xz-4.999.8beta/src/liblzma/common/vli_encoder.c)13
-rw-r--r--Build/source/utils/xz-4.999.9beta/src/liblzma/common/vli_size.c30
-rw-r--r--Build/source/utils/xz-4.999.9beta/src/liblzma/delta/Makefile.inc23
-rw-r--r--Build/source/utils/xz-4.999.9beta/src/liblzma/delta/delta_common.c (renamed from Build/source/utils/xz-4.999.8beta/src/liblzma/delta/delta_common.c)13
-rw-r--r--Build/source/utils/xz-4.999.9beta/src/liblzma/delta/delta_common.h20
-rw-r--r--Build/source/utils/xz-4.999.9beta/src/liblzma/delta/delta_decoder.c (renamed from Build/source/utils/xz-4.999.8beta/src/liblzma/delta/delta_decoder.c)13
-rw-r--r--Build/source/utils/xz-4.999.9beta/src/liblzma/delta/delta_decoder.h (renamed from Build/source/utils/xz-4.999.8beta/src/liblzma/delta/delta_decoder.h)13
-rw-r--r--Build/source/utils/xz-4.999.9beta/src/liblzma/delta/delta_encoder.c (renamed from Build/source/utils/xz-4.999.8beta/src/liblzma/delta/delta_encoder.c)13
-rw-r--r--Build/source/utils/xz-4.999.9beta/src/liblzma/delta/delta_encoder.h23
-rw-r--r--Build/source/utils/xz-4.999.9beta/src/liblzma/delta/delta_private.h (renamed from Build/source/utils/xz-4.999.8beta/src/liblzma/delta/delta_private.h)13
-rw-r--r--Build/source/utils/xz-4.999.9beta/src/liblzma/liblzma.pc.in (renamed from Build/source/utils/xz-4.999.8beta/src/liblzma/liblzma.pc.in)11
-rw-r--r--Build/source/utils/xz-4.999.9beta/src/liblzma/liblzma_w32res.rc12
-rw-r--r--Build/source/utils/xz-4.999.9beta/src/liblzma/lz/Makefile.inc21
-rw-r--r--Build/source/utils/xz-4.999.9beta/src/liblzma/lz/lz_decoder.c (renamed from Build/source/utils/xz-4.999.8beta/src/liblzma/lz/lz_decoder.c)17
-rw-r--r--Build/source/utils/xz-4.999.9beta/src/liblzma/lz/lz_decoder.h (renamed from Build/source/utils/xz-4.999.8beta/src/liblzma/lz/lz_decoder.h)19
-rw-r--r--Build/source/utils/xz-4.999.9beta/src/liblzma/lz/lz_encoder.c (renamed from Build/source/utils/xz-4.999.8beta/src/liblzma/lz/lz_encoder.c)21
-rw-r--r--Build/source/utils/xz-4.999.9beta/src/liblzma/lz/lz_encoder.h (renamed from Build/source/utils/xz-4.999.8beta/src/liblzma/lz/lz_encoder.h)19
-rw-r--r--Build/source/utils/xz-4.999.9beta/src/liblzma/lz/lz_encoder_hash.h (renamed from Build/source/utils/xz-4.999.8beta/src/liblzma/lz/lz_encoder_hash.h)13
-rw-r--r--Build/source/utils/xz-4.999.9beta/src/liblzma/lz/lz_encoder_mf.c (renamed from Build/source/utils/xz-4.999.8beta/src/liblzma/lz/lz_encoder_mf.c)17
-rw-r--r--Build/source/utils/xz-4.999.9beta/src/liblzma/lzma/Makefile.inc43
-rw-r--r--Build/source/utils/xz-4.999.9beta/src/liblzma/lzma/fastpos.h (renamed from Build/source/utils/xz-4.999.8beta/src/liblzma/lzma/fastpos.h)17
-rw-r--r--Build/source/utils/xz-4.999.9beta/src/liblzma/lzma/fastpos_table.c (renamed from Build/source/utils/xz-4.999.8beta/src/liblzma/lzma/fastpos_table.c)0
-rw-r--r--Build/source/utils/xz-4.999.9beta/src/liblzma/lzma/fastpos_tablegen.c (renamed from Build/source/utils/xz-4.999.8beta/src/liblzma/lzma/fastpos_tablegen.c)17
-rw-r--r--Build/source/utils/xz-4.999.9beta/src/liblzma/lzma/lzma2_decoder.c (renamed from Build/source/utils/xz-4.999.8beta/src/liblzma/lzma/lzma2_decoder.c)17
-rw-r--r--Build/source/utils/xz-4.999.9beta/src/liblzma/lzma/lzma2_decoder.h (renamed from Build/source/utils/xz-4.999.8beta/src/liblzma/lzma/lzma2_decoder.h)17
-rw-r--r--Build/source/utils/xz-4.999.9beta/src/liblzma/lzma/lzma2_encoder.c (renamed from Build/source/utils/xz-4.999.8beta/src/liblzma/lzma/lzma2_encoder.c)17
-rw-r--r--Build/source/utils/xz-4.999.9beta/src/liblzma/lzma/lzma2_encoder.h (renamed from Build/source/utils/xz-4.999.8beta/src/liblzma/lzma/lzma2_encoder.h)17
-rw-r--r--Build/source/utils/xz-4.999.9beta/src/liblzma/lzma/lzma_common.h (renamed from Build/source/utils/xz-4.999.8beta/src/liblzma/lzma/lzma_common.h)17
-rw-r--r--Build/source/utils/xz-4.999.9beta/src/liblzma/lzma/lzma_decoder.c (renamed from Build/source/utils/xz-4.999.8beta/src/liblzma/lzma/lzma_decoder.c)17
-rw-r--r--Build/source/utils/xz-4.999.9beta/src/liblzma/lzma/lzma_decoder.h (renamed from Build/source/utils/xz-4.999.8beta/src/liblzma/lzma/lzma_decoder.h)17
-rw-r--r--Build/source/utils/xz-4.999.9beta/src/liblzma/lzma/lzma_encoder.c (renamed from Build/source/utils/xz-4.999.8beta/src/liblzma/lzma/lzma_encoder.c)17
-rw-r--r--Build/source/utils/xz-4.999.9beta/src/liblzma/lzma/lzma_encoder.h (renamed from Build/source/utils/xz-4.999.8beta/src/liblzma/lzma/lzma_encoder.h)17
-rw-r--r--Build/source/utils/xz-4.999.9beta/src/liblzma/lzma/lzma_encoder_optimum_fast.c (renamed from Build/source/utils/xz-4.999.8beta/src/liblzma/lzma/lzma_encoder_optimum_fast.c)13
-rw-r--r--Build/source/utils/xz-4.999.9beta/src/liblzma/lzma/lzma_encoder_optimum_normal.c (renamed from Build/source/utils/xz-4.999.8beta/src/liblzma/lzma/lzma_encoder_optimum_normal.c)13
-rw-r--r--Build/source/utils/xz-4.999.9beta/src/liblzma/lzma/lzma_encoder_presets.c (renamed from Build/source/utils/xz-4.999.8beta/src/liblzma/lzma/lzma_encoder_presets.c)13
-rw-r--r--Build/source/utils/xz-4.999.9beta/src/liblzma/lzma/lzma_encoder_private.h (renamed from Build/source/utils/xz-4.999.8beta/src/liblzma/lzma/lzma_encoder_private.h)17
-rw-r--r--Build/source/utils/xz-4.999.9beta/src/liblzma/rangecoder/Makefile.inc21
-rw-r--r--Build/source/utils/xz-4.999.9beta/src/liblzma/rangecoder/price.h (renamed from Build/source/utils/xz-4.999.8beta/src/liblzma/rangecoder/price.h)13
-rw-r--r--Build/source/utils/xz-4.999.9beta/src/liblzma/rangecoder/price_table.c (renamed from Build/source/utils/xz-4.999.8beta/src/liblzma/rangecoder/price_table.c)0
-rw-r--r--Build/source/utils/xz-4.999.9beta/src/liblzma/rangecoder/price_tablegen.c (renamed from Build/source/utils/xz-4.999.8beta/src/liblzma/rangecoder/price_tablegen.c)16
-rw-r--r--Build/source/utils/xz-4.999.9beta/src/liblzma/rangecoder/range_common.h (renamed from Build/source/utils/xz-4.999.8beta/src/liblzma/rangecoder/range_common.h)17
-rw-r--r--Build/source/utils/xz-4.999.9beta/src/liblzma/rangecoder/range_decoder.h (renamed from Build/source/utils/xz-4.999.8beta/src/liblzma/rangecoder/range_decoder.h)17
-rw-r--r--Build/source/utils/xz-4.999.9beta/src/liblzma/rangecoder/range_encoder.h (renamed from Build/source/utils/xz-4.999.8beta/src/liblzma/rangecoder/range_encoder.h)17
-rw-r--r--Build/source/utils/xz-4.999.9beta/src/liblzma/simple/Makefile.inc47
-rw-r--r--Build/source/utils/xz-4.999.9beta/src/liblzma/simple/arm.c (renamed from Build/source/utils/xz-4.999.8beta/src/liblzma/simple/arm.c)21
-rw-r--r--Build/source/utils/xz-4.999.9beta/src/liblzma/simple/armthumb.c (renamed from Build/source/utils/xz-4.999.8beta/src/liblzma/simple/armthumb.c)21
-rw-r--r--Build/source/utils/xz-4.999.9beta/src/liblzma/simple/ia64.c (renamed from Build/source/utils/xz-4.999.8beta/src/liblzma/simple/ia64.c)19
-rw-r--r--Build/source/utils/xz-4.999.9beta/src/liblzma/simple/powerpc.c (renamed from Build/source/utils/xz-4.999.8beta/src/liblzma/simple/powerpc.c)19
-rw-r--r--Build/source/utils/xz-4.999.9beta/src/liblzma/simple/simple_coder.c (renamed from Build/source/utils/xz-4.999.8beta/src/liblzma/simple/simple_coder.c)18
-rw-r--r--Build/source/utils/xz-4.999.9beta/src/liblzma/simple/simple_coder.h (renamed from Build/source/utils/xz-4.999.8beta/src/liblzma/simple/simple_coder.h)14
-rw-r--r--Build/source/utils/xz-4.999.9beta/src/liblzma/simple/simple_decoder.c (renamed from Build/source/utils/xz-4.999.8beta/src/liblzma/simple/simple_decoder.c)13
-rw-r--r--Build/source/utils/xz-4.999.9beta/src/liblzma/simple/simple_decoder.h22
-rw-r--r--Build/source/utils/xz-4.999.9beta/src/liblzma/simple/simple_encoder.c (renamed from Build/source/utils/xz-4.999.8beta/src/liblzma/simple/simple_encoder.c)13
-rw-r--r--Build/source/utils/xz-4.999.9beta/src/liblzma/simple/simple_encoder.h23
-rw-r--r--Build/source/utils/xz-4.999.9beta/src/liblzma/simple/simple_private.h (renamed from Build/source/utils/xz-4.999.8beta/src/liblzma/simple/simple_private.h)16
-rw-r--r--Build/source/utils/xz-4.999.9beta/src/liblzma/simple/sparc.c (renamed from Build/source/utils/xz-4.999.8beta/src/liblzma/simple/sparc.c)19
-rw-r--r--Build/source/utils/xz-4.999.9beta/src/liblzma/simple/x86.c (renamed from Build/source/utils/xz-4.999.8beta/src/liblzma/simple/x86.c)19
-rw-r--r--Build/source/utils/xz-4.999.9beta/src/liblzma/subblock/Makefile.inc20
-rw-r--r--Build/source/utils/xz-4.999.9beta/src/liblzma/subblock/subblock_decoder.c (renamed from Build/source/utils/xz-4.999.8beta/src/liblzma/subblock/subblock_decoder.c)13
-rw-r--r--Build/source/utils/xz-4.999.9beta/src/liblzma/subblock/subblock_decoder.h22
-rw-r--r--Build/source/utils/xz-4.999.9beta/src/liblzma/subblock/subblock_decoder_helper.c (renamed from Build/source/utils/xz-4.999.8beta/src/liblzma/subblock/subblock_decoder_helper.c)13
-rw-r--r--Build/source/utils/xz-4.999.9beta/src/liblzma/subblock/subblock_decoder_helper.h (renamed from Build/source/utils/xz-4.999.8beta/src/liblzma/subblock/subblock_decoder_helper.h)13
-rw-r--r--Build/source/utils/xz-4.999.9beta/src/liblzma/subblock/subblock_encoder.c (renamed from Build/source/utils/xz-4.999.8beta/src/liblzma/subblock/subblock_encoder.c)13
-rw-r--r--Build/source/utils/xz-4.999.9beta/src/liblzma/subblock/subblock_encoder.h21
-rw-r--r--Build/source/utils/xz-4.999.9beta/src/lzmainfo/Makefile.am29
-rw-r--r--Build/source/utils/xz-4.999.9beta/src/lzmainfo/Makefile.in659
-rw-r--r--Build/source/utils/xz-4.999.9beta/src/lzmainfo/lzmainfo.155
-rw-r--r--Build/source/utils/xz-4.999.9beta/src/lzmainfo/lzmainfo.c242
-rw-r--r--Build/source/utils/xz-4.999.9beta/src/scripts/Makefile.am65
-rw-r--r--Build/source/utils/xz-4.999.9beta/src/scripts/Makefile.in586
-rw-r--r--Build/source/utils/xz-4.999.9beta/src/scripts/xzdiff.174
-rw-r--r--Build/source/utils/xz-4.999.9beta/src/scripts/xzdiff.in172
-rw-r--r--Build/source/utils/xz-4.999.9beta/src/scripts/xzgrep.194
-rw-r--r--Build/source/utils/xz-4.999.9beta/src/scripts/xzgrep.in196
-rw-r--r--Build/source/utils/xz-4.999.9beta/src/scripts/xzless.166
-rw-r--r--Build/source/utils/xz-4.999.9beta/src/scripts/xzless.in58
-rw-r--r--Build/source/utils/xz-4.999.9beta/src/scripts/xzmore.154
-rw-r--r--Build/source/utils/xz-4.999.9beta/src/scripts/xzmore.in78
-rw-r--r--Build/source/utils/xz-4.999.9beta/src/xz/Makefile.am96
-rw-r--r--Build/source/utils/xz-4.999.9beta/src/xz/Makefile.in (renamed from Build/source/utils/xz-4.999.8beta/src/xz/Makefile.in)493
-rw-r--r--Build/source/utils/xz-4.999.9beta/src/xz/args.c (renamed from Build/source/utils/xz-4.999.8beta/src/xz/args.c)147
-rw-r--r--Build/source/utils/xz-4.999.9beta/src/xz/args.h (renamed from Build/source/utils/xz-4.999.8beta/src/xz/args.h)13
-rw-r--r--Build/source/utils/xz-4.999.9beta/src/xz/coder.c (renamed from Build/source/utils/xz-4.999.8beta/src/xz/process.c)343
-rw-r--r--Build/source/utils/xz-4.999.9beta/src/xz/coder.h (renamed from Build/source/utils/xz-4.999.8beta/src/xz/process.h)20
-rw-r--r--Build/source/utils/xz-4.999.9beta/src/xz/file_io.c (renamed from Build/source/utils/xz-4.999.8beta/src/xz/io.c)57
-rw-r--r--Build/source/utils/xz-4.999.9beta/src/xz/file_io.h (renamed from Build/source/utils/xz-4.999.8beta/src/xz/io.h)15
-rw-r--r--Build/source/utils/xz-4.999.9beta/src/xz/hardware.c95
-rw-r--r--Build/source/utils/xz-4.999.9beta/src/xz/hardware.h35
-rw-r--r--Build/source/utils/xz-4.999.9beta/src/xz/main.c (renamed from Build/source/utils/xz-4.999.8beta/src/xz/main.c)65
-rw-r--r--Build/source/utils/xz-4.999.9beta/src/xz/main.h (renamed from Build/source/utils/xz-4.999.8beta/src/xz/main.h)21
-rw-r--r--Build/source/utils/xz-4.999.9beta/src/xz/message.c (renamed from Build/source/utils/xz-4.999.8beta/src/xz/message.c)559
-rw-r--r--Build/source/utils/xz-4.999.9beta/src/xz/message.h (renamed from Build/source/utils/xz-4.999.8beta/src/xz/message.h)41
-rw-r--r--Build/source/utils/xz-4.999.9beta/src/xz/options.c (renamed from Build/source/utils/xz-4.999.8beta/src/xz/options.c)138
-rw-r--r--Build/source/utils/xz-4.999.9beta/src/xz/options.h (renamed from Build/source/utils/xz-4.999.8beta/src/xz/options.h)20
-rw-r--r--Build/source/utils/xz-4.999.9beta/src/xz/private.h (renamed from Build/source/utils/xz-4.999.8beta/src/xz/private.h)17
-rw-r--r--Build/source/utils/xz-4.999.9beta/src/xz/signals.c (renamed from Build/source/utils/xz-4.999.8beta/src/xz/signals.c)13
-rw-r--r--Build/source/utils/xz-4.999.9beta/src/xz/signals.h (renamed from Build/source/utils/xz-4.999.8beta/src/xz/signals.h)13
-rw-r--r--Build/source/utils/xz-4.999.9beta/src/xz/suffix.c (renamed from Build/source/utils/xz-4.999.8beta/src/xz/suffix.c)18
-rw-r--r--Build/source/utils/xz-4.999.9beta/src/xz/suffix.h (renamed from Build/source/utils/xz-4.999.8beta/src/xz/suffix.h)13
-rw-r--r--Build/source/utils/xz-4.999.9beta/src/xz/util.c (renamed from Build/source/utils/xz-4.999.8beta/src/xz/util.c)51
-rw-r--r--Build/source/utils/xz-4.999.9beta/src/xz/util.h (renamed from Build/source/utils/xz-4.999.8beta/src/xz/util.h)33
-rw-r--r--Build/source/utils/xz-4.999.9beta/src/xz/xz.11250
-rw-r--r--Build/source/utils/xz-4.999.9beta/src/xz/xz_w32res.rc12
-rw-r--r--Build/source/utils/xz-4.999.9beta/src/xzdec/Makefile.am61
-rw-r--r--Build/source/utils/xz-4.999.9beta/src/xzdec/Makefile.in (renamed from Build/source/utils/xz-4.999.8beta/src/xzdec/Makefile.in)364
-rw-r--r--Build/source/utils/xz-4.999.9beta/src/xzdec/lzmadec_w32res.rc5
-rw-r--r--Build/source/utils/xz-4.999.9beta/src/xzdec/xzdec.1168
-rw-r--r--Build/source/utils/xz-4.999.9beta/src/xzdec/xzdec.c (renamed from Build/source/utils/xz-4.999.8beta/src/xzdec/xzdec.c)181
-rw-r--r--Build/source/utils/xz-4.999.9beta/src/xzdec/xzdec_w32res.rc12
-rw-r--r--Build/source/utils/xz-4.999.9beta/tests/Makefile.am51
-rw-r--r--Build/source/utils/xz-4.999.9beta/tests/Makefile.in (renamed from Build/source/utils/xz-4.999.8beta/tests/Makefile.in)189
-rw-r--r--Build/source/utils/xz-4.999.9beta/tests/bcj_test.c (renamed from Build/source/utils/xz-4.999.8beta/tests/bcj_test.c)7
-rw-r--r--Build/source/utils/xz-4.999.9beta/tests/compress_prepared_bcj_sparc (renamed from Build/source/utils/xz-4.999.8beta/tests/compress_prepared_bcj_sparc)bin1240 -> 1240 bytes
-rw-r--r--Build/source/utils/xz-4.999.9beta/tests/compress_prepared_bcj_x86 (renamed from Build/source/utils/xz-4.999.8beta/tests/compress_prepared_bcj_x86)bin1388 -> 1388 bytes
-rw-r--r--Build/source/utils/xz-4.999.9beta/tests/create_compress_files.c (renamed from Build/source/utils/xz-4.999.8beta/tests/create_compress_files.c)13
-rw-r--r--Build/source/utils/xz-4.999.9beta/tests/files/README (renamed from Build/source/utils/xz-4.999.8beta/tests/files/README)17
-rw-r--r--Build/source/utils/xz-4.999.9beta/tests/files/bad-0-backward_size.xz (renamed from Build/source/utils/xz-4.999.8beta/tests/files/bad-0-backward_size.xz)bin32 -> 32 bytes
-rw-r--r--Build/source/utils/xz-4.999.9beta/tests/files/bad-0-empty-truncated.xz (renamed from Build/source/utils/xz-4.999.8beta/tests/files/bad-0-empty-truncated.xz)bin31 -> 31 bytes
-rw-r--r--Build/source/utils/xz-4.999.9beta/tests/files/bad-0-footer_magic.xz (renamed from Build/source/utils/xz-4.999.8beta/tests/files/bad-0-footer_magic.xz)bin32 -> 32 bytes
-rw-r--r--Build/source/utils/xz-4.999.9beta/tests/files/bad-0-header_magic.xz (renamed from Build/source/utils/xz-4.999.8beta/tests/files/bad-0-header_magic.xz)bin32 -> 32 bytes
-rw-r--r--Build/source/utils/xz-4.999.9beta/tests/files/bad-0-nonempty_index.xz (renamed from Build/source/utils/xz-4.999.8beta/tests/files/bad-0-nonempty_index.xz)bin32 -> 32 bytes
-rw-r--r--Build/source/utils/xz-4.999.9beta/tests/files/bad-0cat-alone.xz (renamed from Build/source/utils/xz-4.999.8beta/tests/files/bad-0cat-alone.xz)bin55 -> 55 bytes
-rw-r--r--Build/source/utils/xz-4.999.9beta/tests/files/bad-0cat-header_magic.xz (renamed from Build/source/utils/xz-4.999.8beta/tests/files/bad-0cat-header_magic.xz)bin64 -> 64 bytes
-rw-r--r--Build/source/utils/xz-4.999.9beta/tests/files/bad-0catpad-empty.xz (renamed from Build/source/utils/xz-4.999.8beta/tests/files/bad-0catpad-empty.xz)bin69 -> 69 bytes
-rw-r--r--Build/source/utils/xz-4.999.9beta/tests/files/bad-0pad-empty.xz (renamed from Build/source/utils/xz-4.999.8beta/tests/files/bad-0pad-empty.xz)bin37 -> 37 bytes
-rw-r--r--Build/source/utils/xz-4.999.9beta/tests/files/bad-1-block_header-1.xz (renamed from Build/source/utils/xz-4.999.8beta/tests/files/bad-1-block_header-1.xz)bin64 -> 64 bytes
-rw-r--r--Build/source/utils/xz-4.999.9beta/tests/files/bad-1-block_header-2.xz (renamed from Build/source/utils/xz-4.999.8beta/tests/files/bad-1-block_header-2.xz)bin64 -> 64 bytes
-rw-r--r--Build/source/utils/xz-4.999.9beta/tests/files/bad-1-block_header-3.xz (renamed from Build/source/utils/xz-4.999.8beta/tests/files/bad-1-block_header-3.xz)bin68 -> 68 bytes
-rw-r--r--Build/source/utils/xz-4.999.9beta/tests/files/bad-1-block_header-4.xz (renamed from Build/source/utils/xz-4.999.8beta/tests/files/bad-1-block_header-4.xz)bin76 -> 76 bytes
-rw-r--r--Build/source/utils/xz-4.999.9beta/tests/files/bad-1-block_header-5.xz (renamed from Build/source/utils/xz-4.999.8beta/tests/files/bad-1-block_header-5.xz)bin72 -> 72 bytes
-rw-r--r--Build/source/utils/xz-4.999.9beta/tests/files/bad-1-check-crc32.xz (renamed from Build/source/utils/xz-4.999.8beta/tests/files/bad-1-check-crc32.xz)bin68 -> 68 bytes
-rw-r--r--Build/source/utils/xz-4.999.9beta/tests/files/bad-1-check-crc64.xz (renamed from Build/source/utils/xz-4.999.8beta/tests/files/bad-1-check-crc64.xz)bin72 -> 72 bytes
-rw-r--r--Build/source/utils/xz-4.999.9beta/tests/files/bad-1-check-sha256.xz (renamed from Build/source/utils/xz-4.999.8beta/tests/files/bad-1-check-sha256.xz)bin96 -> 96 bytes
-rw-r--r--Build/source/utils/xz-4.999.9beta/tests/files/bad-1-lzma2-1.xz (renamed from Build/source/utils/xz-4.999.8beta/tests/files/bad-1-lzma2-1.xz)bin64 -> 64 bytes
-rw-r--r--Build/source/utils/xz-4.999.9beta/tests/files/bad-1-lzma2-2.xz (renamed from Build/source/utils/xz-4.999.8beta/tests/files/bad-1-lzma2-2.xz)bin424 -> 424 bytes
-rw-r--r--Build/source/utils/xz-4.999.9beta/tests/files/bad-1-lzma2-3.xz (renamed from Build/source/utils/xz-4.999.8beta/tests/files/bad-1-lzma2-3.xz)bin424 -> 424 bytes
-rw-r--r--Build/source/utils/xz-4.999.9beta/tests/files/bad-1-lzma2-4.xz (renamed from Build/source/utils/xz-4.999.8beta/tests/files/bad-1-lzma2-4.xz)bin408 -> 408 bytes
-rw-r--r--Build/source/utils/xz-4.999.9beta/tests/files/bad-1-lzma2-5.xz (renamed from Build/source/utils/xz-4.999.8beta/tests/files/bad-1-lzma2-5.xz)bin408 -> 408 bytes
-rw-r--r--Build/source/utils/xz-4.999.9beta/tests/files/bad-1-lzma2-6.xz (renamed from Build/source/utils/xz-4.999.8beta/tests/files/bad-1-lzma2-6.xz)bin68 -> 68 bytes
-rw-r--r--Build/source/utils/xz-4.999.9beta/tests/files/bad-1-lzma2-7.xz (renamed from Build/source/utils/xz-4.999.8beta/tests/files/bad-1-lzma2-7.xz)bin408 -> 408 bytes
-rw-r--r--Build/source/utils/xz-4.999.9beta/tests/files/bad-1-lzma2-8.xz (renamed from Build/source/utils/xz-4.999.8beta/tests/files/bad-1-lzma2-8.xz)bin464 -> 464 bytes
-rw-r--r--Build/source/utils/xz-4.999.9beta/tests/files/bad-1-stream_flags-1.xz (renamed from Build/source/utils/xz-4.999.8beta/tests/files/bad-1-stream_flags-1.xz)bin68 -> 68 bytes
-rw-r--r--Build/source/utils/xz-4.999.9beta/tests/files/bad-1-stream_flags-2.xz (renamed from Build/source/utils/xz-4.999.8beta/tests/files/bad-1-stream_flags-2.xz)bin68 -> 68 bytes
-rw-r--r--Build/source/utils/xz-4.999.9beta/tests/files/bad-1-stream_flags-3.xz (renamed from Build/source/utils/xz-4.999.8beta/tests/files/bad-1-stream_flags-3.xz)bin68 -> 68 bytes
-rw-r--r--Build/source/utils/xz-4.999.9beta/tests/files/bad-1-vli-1.xz (renamed from Build/source/utils/xz-4.999.8beta/tests/files/bad-1-vli-1.xz)bin72 -> 72 bytes
-rw-r--r--Build/source/utils/xz-4.999.9beta/tests/files/bad-1-vli-2.xz (renamed from Build/source/utils/xz-4.999.8beta/tests/files/bad-1-vli-2.xz)bin76 -> 76 bytes
-rw-r--r--Build/source/utils/xz-4.999.9beta/tests/files/bad-2-compressed_data_padding.xz (renamed from Build/source/utils/xz-4.999.8beta/tests/files/bad-2-compressed_data_padding.xz)bin92 -> 92 bytes
-rw-r--r--Build/source/utils/xz-4.999.9beta/tests/files/bad-2-index-1.xz (renamed from Build/source/utils/xz-4.999.8beta/tests/files/bad-2-index-1.xz)bin92 -> 92 bytes
-rw-r--r--Build/source/utils/xz-4.999.9beta/tests/files/bad-2-index-2.xz (renamed from Build/source/utils/xz-4.999.8beta/tests/files/bad-2-index-2.xz)bin92 -> 92 bytes
-rw-r--r--Build/source/utils/xz-4.999.9beta/tests/files/bad-2-index-3.xz (renamed from Build/source/utils/xz-4.999.8beta/tests/files/bad-2-index-3.xz)bin92 -> 92 bytes
-rw-r--r--Build/source/utils/xz-4.999.9beta/tests/files/bad-2-index-4.xz (renamed from Build/source/utils/xz-4.999.8beta/tests/files/bad-2-index-4.xz)bin92 -> 92 bytes
-rw-r--r--Build/source/utils/xz-4.999.9beta/tests/files/bad-2-index-5.xz (renamed from Build/source/utils/xz-4.999.8beta/tests/files/bad-2-index-5.xz)bin92 -> 92 bytes
-rw-r--r--Build/source/utils/xz-4.999.9beta/tests/files/good-0-empty.xz (renamed from Build/source/utils/xz-4.999.8beta/tests/files/good-0-empty.xz)bin32 -> 32 bytes
-rw-r--r--Build/source/utils/xz-4.999.9beta/tests/files/good-0cat-empty.xz (renamed from Build/source/utils/xz-4.999.8beta/tests/files/good-0cat-empty.xz)bin64 -> 64 bytes
-rw-r--r--Build/source/utils/xz-4.999.9beta/tests/files/good-0catpad-empty.xz (renamed from Build/source/utils/xz-4.999.8beta/tests/files/good-0catpad-empty.xz)bin68 -> 68 bytes
-rw-r--r--Build/source/utils/xz-4.999.9beta/tests/files/good-0pad-empty.xz (renamed from Build/source/utils/xz-4.999.8beta/tests/files/good-0pad-empty.xz)bin36 -> 36 bytes
-rw-r--r--Build/source/utils/xz-4.999.9beta/tests/files/good-1-3delta-lzma2.xz (renamed from Build/source/utils/xz-4.999.8beta/tests/files/good-1-3delta-lzma2.xz)bin528 -> 528 bytes
-rw-r--r--Build/source/utils/xz-4.999.9beta/tests/files/good-1-block_header-1.xz (renamed from Build/source/utils/xz-4.999.8beta/tests/files/good-1-block_header-1.xz)bin72 -> 72 bytes
-rw-r--r--Build/source/utils/xz-4.999.9beta/tests/files/good-1-block_header-2.xz (renamed from Build/source/utils/xz-4.999.8beta/tests/files/good-1-block_header-2.xz)bin68 -> 68 bytes
-rw-r--r--Build/source/utils/xz-4.999.9beta/tests/files/good-1-block_header-3.xz (renamed from Build/source/utils/xz-4.999.8beta/tests/files/good-1-block_header-3.xz)bin68 -> 68 bytes
-rw-r--r--Build/source/utils/xz-4.999.9beta/tests/files/good-1-check-crc32.xz (renamed from Build/source/utils/xz-4.999.8beta/tests/files/good-1-check-crc32.xz)bin68 -> 68 bytes
-rw-r--r--Build/source/utils/xz-4.999.9beta/tests/files/good-1-check-crc64.xz (renamed from Build/source/utils/xz-4.999.8beta/tests/files/good-1-check-crc64.xz)bin72 -> 72 bytes
-rw-r--r--Build/source/utils/xz-4.999.9beta/tests/files/good-1-check-none.xz (renamed from Build/source/utils/xz-4.999.8beta/tests/files/good-1-check-none.xz)bin64 -> 64 bytes
-rw-r--r--Build/source/utils/xz-4.999.9beta/tests/files/good-1-check-sha256.xz (renamed from Build/source/utils/xz-4.999.8beta/tests/files/good-1-check-sha256.xz)bin96 -> 96 bytes
-rw-r--r--Build/source/utils/xz-4.999.9beta/tests/files/good-1-delta-lzma2.tiff.xz (renamed from Build/source/utils/xz-4.999.8beta/tests/files/good-1-delta-lzma2.tiff.xz)bin51316 -> 51316 bytes
-rw-r--r--Build/source/utils/xz-4.999.9beta/tests/files/good-1-lzma2-1.xz (renamed from Build/source/utils/xz-4.999.8beta/tests/files/good-1-lzma2-1.xz)bin424 -> 424 bytes
-rw-r--r--Build/source/utils/xz-4.999.9beta/tests/files/good-1-lzma2-2.xz (renamed from Build/source/utils/xz-4.999.8beta/tests/files/good-1-lzma2-2.xz)bin424 -> 424 bytes
-rw-r--r--Build/source/utils/xz-4.999.9beta/tests/files/good-1-lzma2-3.xz (renamed from Build/source/utils/xz-4.999.8beta/tests/files/good-1-lzma2-3.xz)bin408 -> 408 bytes
-rw-r--r--Build/source/utils/xz-4.999.9beta/tests/files/good-1-lzma2-4.xz (renamed from Build/source/utils/xz-4.999.8beta/tests/files/good-1-lzma2-4.xz)bin464 -> 464 bytes
-rw-r--r--Build/source/utils/xz-4.999.9beta/tests/files/good-1-sparc-lzma2.xz (renamed from Build/source/utils/xz-4.999.8beta/tests/files/good-1-sparc-lzma2.xz)bin612 -> 612 bytes
-rw-r--r--Build/source/utils/xz-4.999.9beta/tests/files/good-1-x86-lzma2.xz (renamed from Build/source/utils/xz-4.999.8beta/tests/files/good-1-x86-lzma2.xz)bin716 -> 716 bytes
-rw-r--r--Build/source/utils/xz-4.999.9beta/tests/files/good-2-lzma2.xz (renamed from Build/source/utils/xz-4.999.8beta/tests/files/good-2-lzma2.xz)bin92 -> 92 bytes
-rw-r--r--Build/source/utils/xz-4.999.9beta/tests/files/unsupported-block_header.xz (renamed from Build/source/utils/xz-4.999.8beta/tests/files/unsupported-block_header.xz)bin68 -> 68 bytes
-rw-r--r--Build/source/utils/xz-4.999.9beta/tests/files/unsupported-check.xz (renamed from Build/source/utils/xz-4.999.8beta/tests/files/unsupported-check.xz)bin68 -> 68 bytes
-rw-r--r--Build/source/utils/xz-4.999.9beta/tests/files/unsupported-filter_flags-1.xz (renamed from Build/source/utils/xz-4.999.8beta/tests/files/unsupported-filter_flags-1.xz)bin68 -> 68 bytes
-rw-r--r--Build/source/utils/xz-4.999.9beta/tests/files/unsupported-filter_flags-2.xz (renamed from Build/source/utils/xz-4.999.8beta/tests/files/unsupported-filter_flags-2.xz)bin68 -> 68 bytes
-rw-r--r--Build/source/utils/xz-4.999.9beta/tests/files/unsupported-filter_flags-3.xz (renamed from Build/source/utils/xz-4.999.8beta/tests/files/unsupported-filter_flags-3.xz)bin68 -> 68 bytes
-rw-r--r--Build/source/utils/xz-4.999.9beta/tests/test_block_header.c (renamed from Build/source/utils/xz-4.999.8beta/tests/test_block_header.c)13
-rw-r--r--Build/source/utils/xz-4.999.9beta/tests/test_check.c (renamed from Build/source/utils/xz-4.999.8beta/tests/test_check.c)13
-rwxr-xr-xBuild/source/utils/xz-4.999.9beta/tests/test_compress.sh (renamed from Build/source/utils/xz-4.999.8beta/tests/test_compress.sh)13
-rwxr-xr-xBuild/source/utils/xz-4.999.9beta/tests/test_files.sh33
-rw-r--r--Build/source/utils/xz-4.999.9beta/tests/test_filter_flags.c (renamed from Build/source/utils/xz-4.999.8beta/tests/test_filter_flags.c)13
-rw-r--r--Build/source/utils/xz-4.999.9beta/tests/test_index.c (renamed from Build/source/utils/xz-4.999.8beta/tests/test_index.c)13
-rw-r--r--Build/source/utils/xz-4.999.9beta/tests/test_stream_flags.c (renamed from Build/source/utils/xz-4.999.8beta/tests/test_stream_flags.c)13
-rw-r--r--Build/source/utils/xz-4.999.9beta/tests/tests.h (renamed from Build/source/utils/xz-4.999.8beta/tests/tests.h)13
-rw-r--r--Build/source/utils/xz-4.999.9beta/version.sh24
-rw-r--r--Build/source/utils/xz-4.999.9beta/windows/Makefile (renamed from Build/source/utils/xz-4.999.8beta/windows/Makefile)115
-rw-r--r--Build/source/utils/xz-4.999.9beta/windows/README (renamed from Build/source/utils/xz-4.999.8beta/windows/README)10
-rw-r--r--Build/source/utils/xz-4.999.9beta/windows/config.h (renamed from Build/source/utils/xz-4.999.8beta/windows/config.h)15
452 files changed, 58738 insertions, 55870 deletions
diff --git a/Build/source/utils/xz-4.999.8beta/AUTHORS b/Build/source/utils/xz-4.999.8beta/AUTHORS
deleted file mode 100644
index d7bf3a9f536..00000000000
--- a/Build/source/utils/xz-4.999.8beta/AUTHORS
+++ /dev/null
@@ -1,18 +0,0 @@
-
-Authors of XZ Utils
-===================
-
-Igor Pavlov
- * designed LZMA as an algorithm;
- * wrote an implementation known as LZMA SDK, which is part of
- the bigger 7-Zip project.
-
-Ville Koskinen
- * wrote the first version of the gzip-like lzma command line
- utility (C++)
- * helped a lot with the documentation.
-
-Lasse Collin
- * ported LZMA SDK to C and zlib-like API (liblzma);
- * rewrote the command line tool again to use liblzma and pthreads.
-
diff --git a/Build/source/utils/xz-4.999.8beta/ChangeLog b/Build/source/utils/xz-4.999.8beta/ChangeLog
deleted file mode 100644
index c6de9baf39a..00000000000
--- a/Build/source/utils/xz-4.999.8beta/ChangeLog
+++ /dev/null
@@ -1,2 +0,0 @@
-See the commit log in the git repository:
-git://ctrl.tukaani.org/lzma-utils.git
diff --git a/Build/source/utils/xz-4.999.8beta/Makefile.am b/Build/source/utils/xz-4.999.8beta/Makefile.am
deleted file mode 100644
index 507fe333941..00000000000
--- a/Build/source/utils/xz-4.999.8beta/Makefile.am
+++ /dev/null
@@ -1,39 +0,0 @@
-##
-## Copyright (C) 2007 Lasse Collin
-##
-## This library is free software; you can redistribute it and/or
-## modify it under the terms of the GNU Lesser General Public
-## License as published by the Free Software Foundation; either
-## version 2.1 of the License, or (at your option) any later version.
-##
-## This library is distributed in the hope that it will be useful,
-## but WITHOUT ANY WARRANTY; without even the implied warranty of
-## MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the GNU
-## Lesser General Public License for more details.
-##
-
-DIST_SUBDIRS = lib src po tests debug
-SUBDIRS =
-
-if COND_GNULIB
-SUBDIRS += lib
-endif
-
-SUBDIRS += src po tests
-
-EXTRA_DIST = \
- config.rpath \
- Doxyfile.in \
- extra \
- doc \
- windows \
- COPYING.GPLv2 \
- COPYING.GPLv3 \
- COPYING.LGPLv2.1
-
-ACLOCAL_AMFLAGS = -I m4
-
-# This works with GNU tar and gives cleaner package than normal 'make dist'.
-mydist:
- TAR_OPTIONS='--owner=0 --group=0 --numeric-owner --mode=u+rw,go+r-w' \
- $(MAKE) dist-gzip
diff --git a/Build/source/utils/xz-4.999.8beta/README b/Build/source/utils/xz-4.999.8beta/README
deleted file mode 100644
index ca2867dba80..00000000000
--- a/Build/source/utils/xz-4.999.8beta/README
+++ /dev/null
@@ -1,194 +0,0 @@
-
-XZ Utils
-========
-
-Important
-
- This is a beta version. The .xz file format is now stable though,
- which means that files created with the beta version will be
- uncompressible with all future XZ Utils versions too (assuming
- that there are no catastrophical bugs).
-
- liblzma API is pretty stable now, although minor tweaks may still
- be done if really needed. The ABI is not stable yet. The major
- soname will be bumped right before the first stable release.
- Probably it will be bumped to something like .so.5.0.0 because
- some distributions using the alpha versions already had to use
- other versions than .so.0.0.0.
-
- Excluding the Doxygen style docs in libilzma API headers, the
- documentation in this package (including the rest of this
- README) is not very up to date, and may contain incorrect or
- misleading information.
-
-
-Overview
-
- LZMA is a general purporse compression algorithm designed by
- Igor Pavlov as part of 7-Zip. It provides high compression ratio
- while keeping the decompression speed fast.
-
- XZ Utils are an attempt to make LZMA compression easy to use
- on free (as in freedom) operating systems. This is achieved by
- providing tools and libraries which are similar to use than the
- equivalents of the most popular existing compression algorithms.
-
- XZ Utils consist of a few relatively separate parts:
- * liblzma is an encoder/decoder library with support for several
- filters (algorithm implementations). The primary filter is LZMA.
- * libzfile (or whatever the name will be) enables reading from and
- writing to gzip, bzip2 and LZMA compressed and uncompressed files
- with an API similar to the standard ANSI-C file I/O.
- [ NOTE: libzfile is not implemented yet. ]
- * xz command line tool has almost identical syntax than gzip
- and bzip2. It makes LZMA easy for average users, but also
- provides advanced options to finetune the compression settings.
- * A few shell scripts make diffing and grepping LZMA compressed
- files easy. The scripts were adapted from gzip and bzip2.
-
-
-Supported platforms
-
- XZ Utils are developed on GNU+Linux, but they should work at
- least on *BSDs and Solaris. They probably work on some other
- POSIX-like operating systems too.
-
- If you use GCC to compile XZ Utils, you need at least version
- 3.x.x. GCC version 2.xx.x doesn't support some C99 features used
- in XZ Utils source code, thus GCC 2 won't compile XZ Utils.
-
- If you have written patches to make XZ Utils to work on previously
- unsupported platform, please send the patches to me! I will consider
- including them to the official version. It's nice to minimize the
- need of third-party patching.
-
- One exception: Don't request or send patches to change the whole
- source package to C89. I find C99 substantially nicer to write and
- maintain. However, the public library headers must be in C89 to
- avoid frustrating those who maintain programs, which are strictly
- in C89 or C++.
-
-
-Version numbering
-
- The version number of XZ Utils has absolutely nothing to do with
- the version number of LZMA SDK or 7-Zip. The new version number
- format of XZ Utils is X.Y.ZS:
-
- - X is the major version. When this is incremented, the library
- API and ABI break.
-
- - Y is the minor version. It is incremented when new features are
- added without breaking existing API or ABI. Even Y indicates
- stable release and odd Y indicates unstable (alpha or beta
- version).
-
- - Z is the revision. This has different meaning for stable and
- unstable releases:
- * Stable: Z is incremented when bugs get fixed without adding
- any new features.
- * Unstable: Z is just a counter. API or ABI of features added
- in earlier unstable releases having the same X.Y may break.
-
- - S indicates stability of the release. It is missing from the
- stable releases where Y is an even number. When Y is odd, S
- is either "alpha" or "beta" to make it very clear that such
- versions are not stable releases. The same X.Y.Z combination is
- not used for more than one stability level i.e. after X.Y.Zalpha,
- the next version can be X.Y.(Z+1)beta but not X.Y.Zbeta.
-
-
-configure options
-
- If you are not familiar with `configure' scripts, read the file
- INSTALL first.
-
- In most cases, the default --enable/--disable/--with/--without options
- are what you want. Don't touch them if you are unsure.
-
- --disable-encoder
- Do not compile the encoder component of liblzma. This
- implies --disable-match-finders. If you need only
- the decoder, you can decrease the library size
- dramatically with this option.
-
- The default is to build the encoder.
-
- --disable-decoder
- Do not compile the decoder component of liblzma.
-
- The default is to build the decoder.
-
- --enable-filters=
- liblzma supports several filters. See liblzma-intro.txt
- for a little more information about these.
-
- The default is to build all the filters.
-
- --enable-match-finders=
- liblzma includes two categories of match finders:
- hash chains and binary trees. Hash chains (hc3 and hc4)
- are quite fast but they don't provide the best compression
- ratio. Binary trees (bt2, bt3 and bt4) give excellent
- compression ratio, but they are slower and need more
- memory than hash chains.
-
- You need to enable at least one match finder to build the
- LZMA filter encoder. Usually hash chains are used only in
- the fast mode, while binary trees are used to when the best
- compression ratio is wanted.
-
- The default is to build all the match finders.
-
- --enable-checks=
- liblzma support multiple integrity checks. CRC32 is
- mandatory, and cannot be omitted. See liblzma-intro.txt
- for more information about usage of the integrity checks.
-
- --disable-assembler
- liblzma includes some assembler optimizations. Currently
- there is only assembler code for CRC32 and CRC64 for
- 32-bit x86.
-
- All the assembler code in liblzma is position-independent
- code, which is suitable for use in shared libraries and
- position-independent executables. So far only i386
- instructions are used, but the code is optimized for i686
- class CPUs. If you are compiling liblzma exclusively for
- pre-i686 systems, you may want to disable the assembler
- code.
-
- --enable-small
- Omits precomputed tables. This makes liblzma a few KiB
- smaller. Startup time increases, because the tables need
- to be computed first.
-
- --enable-debug
- This enables the assert() macro and possibly some other
- run-time consistency checks. It slows down things somewhat,
- so you normally don't want to have this enabled.
-
- --enable-werror
- Makes all compiler warnings an error, that abort the
- compilation. This may help catching bugs, and should work
- on most systems. This has no effect on the resulting
- binaries.
-
-
-Static vs. dynamic linking of the command line tools
-
- By default, the command line tools are linked statically against
- liblzma. There a are a few reasons:
-
- - The executable(s) can be in /bin while the shared liblzma can still
- be in /usr/lib (if the distro uses such file system hierachy).
-
- - It's easier to copy the executables to other systems, since they
- depend only on libc.
-
- - It's slightly faster on some architectures like x86.
-
- If you don't like this, you can get the command line tools linked
- against the shared liblzma by specifying --disable-static to configure.
- This disables building static liblzma completely.
-
diff --git a/Build/source/utils/xz-4.999.8beta/THANKS b/Build/source/utils/xz-4.999.8beta/THANKS
deleted file mode 100644
index 9381335669f..00000000000
--- a/Build/source/utils/xz-4.999.8beta/THANKS
+++ /dev/null
@@ -1,33 +0,0 @@
-
-Thanks
-------
-
-Some people have helped more, some less, some don't even know they have
-been helpful, but nevertheless everyone's help has been important. :-)
-In alphabetical order:
- - Mark Adler
- - Nelson H. F. Beebe
- - Anders F. Björklund
- - İsmail Dönmez
- - Jean-loup Gailly
- - Per Øyvind Karlsen
- - Ville Koskinen
- - Stephan Kulow
- - Andraž 'ruskie' Levstik
- - Jim Meyering
- - Hongbo Ni
- - Igor Pavlov
- - Mikko Pouru
- - Bernhard Reutner-Fischer
- - Alexandre Sauvé
- - Andreas Schwab
- - Julian Seward
- - Dan Shechter
- - Paul Townsend
- - Mohammed Adnène Trojette
- - Ralf Wildenhues
- - Andreas Zieringer
-
-Also thanks to all the people who have participated the Tukaani project
-and others who I have forgot.
-
diff --git a/Build/source/utils/xz-4.999.8beta/aclocal.m4 b/Build/source/utils/xz-4.999.8beta/aclocal.m4
deleted file mode 100644
index 72c9fb6c4ca..00000000000
--- a/Build/source/utils/xz-4.999.8beta/aclocal.m4
+++ /dev/null
@@ -1,7633 +0,0 @@
-# generated automatically by aclocal 1.10.2 -*- Autoconf -*-
-
-# Copyright (C) 1996, 1997, 1998, 1999, 2000, 2001, 2002, 2003, 2004,
-# 2005, 2006, 2007, 2008 Free Software Foundation, Inc.
-# This file is free software; the Free Software Foundation
-# gives unlimited permission to copy and/or distribute it,
-# with or without modifications, as long as this notice is preserved.
-
-# This program is distributed in the hope that it will be useful,
-# but WITHOUT ANY WARRANTY, to the extent permitted by law; without
-# even the implied warranty of MERCHANTABILITY or FITNESS FOR A
-# PARTICULAR PURPOSE.
-
-m4_ifndef([AC_AUTOCONF_VERSION],
- [m4_copy([m4_PACKAGE_VERSION], [AC_AUTOCONF_VERSION])])dnl
-m4_if(m4_defn([AC_AUTOCONF_VERSION]), [2.62],,
-[m4_warning([this file was generated for autoconf 2.62.
-You have another version of autoconf. It may work, but is not guaranteed to.
-If you have problems, you may need to regenerate the build system entirely.
-To do so, use the procedure documented by the package, typically `autoreconf'.])])
-
-# libtool.m4 - Configure libtool for the host system. -*-Autoconf-*-
-
-# serial 52 AC_PROG_LIBTOOL
-
-
-# AC_PROVIDE_IFELSE(MACRO-NAME, IF-PROVIDED, IF-NOT-PROVIDED)
-# -----------------------------------------------------------
-# If this macro is not defined by Autoconf, define it here.
-m4_ifdef([AC_PROVIDE_IFELSE],
- [],
- [m4_define([AC_PROVIDE_IFELSE],
- [m4_ifdef([AC_PROVIDE_$1],
- [$2], [$3])])])
-
-
-# AC_PROG_LIBTOOL
-# ---------------
-AC_DEFUN([AC_PROG_LIBTOOL],
-[AC_REQUIRE([_AC_PROG_LIBTOOL])dnl
-dnl If AC_PROG_CXX has already been expanded, run AC_LIBTOOL_CXX
-dnl immediately, otherwise, hook it in at the end of AC_PROG_CXX.
- AC_PROVIDE_IFELSE([AC_PROG_CXX],
- [AC_LIBTOOL_CXX],
- [define([AC_PROG_CXX], defn([AC_PROG_CXX])[AC_LIBTOOL_CXX
- ])])
-dnl And a similar setup for Fortran 77 support
- AC_PROVIDE_IFELSE([AC_PROG_F77],
- [AC_LIBTOOL_F77],
- [define([AC_PROG_F77], defn([AC_PROG_F77])[AC_LIBTOOL_F77
-])])
-
-dnl Quote A][M_PROG_GCJ so that aclocal doesn't bring it in needlessly.
-dnl If either AC_PROG_GCJ or A][M_PROG_GCJ have already been expanded, run
-dnl AC_LIBTOOL_GCJ immediately, otherwise, hook it in at the end of both.
- AC_PROVIDE_IFELSE([AC_PROG_GCJ],
- [AC_LIBTOOL_GCJ],
- [AC_PROVIDE_IFELSE([A][M_PROG_GCJ],
- [AC_LIBTOOL_GCJ],
- [AC_PROVIDE_IFELSE([LT_AC_PROG_GCJ],
- [AC_LIBTOOL_GCJ],
- [ifdef([AC_PROG_GCJ],
- [define([AC_PROG_GCJ], defn([AC_PROG_GCJ])[AC_LIBTOOL_GCJ])])
- ifdef([A][M_PROG_GCJ],
- [define([A][M_PROG_GCJ], defn([A][M_PROG_GCJ])[AC_LIBTOOL_GCJ])])
- ifdef([LT_AC_PROG_GCJ],
- [define([LT_AC_PROG_GCJ],
- defn([LT_AC_PROG_GCJ])[AC_LIBTOOL_GCJ])])])])
-])])# AC_PROG_LIBTOOL
-
-
-# _AC_PROG_LIBTOOL
-# ----------------
-AC_DEFUN([_AC_PROG_LIBTOOL],
-[AC_REQUIRE([AC_LIBTOOL_SETUP])dnl
-AC_BEFORE([$0],[AC_LIBTOOL_CXX])dnl
-AC_BEFORE([$0],[AC_LIBTOOL_F77])dnl
-AC_BEFORE([$0],[AC_LIBTOOL_GCJ])dnl
-
-# This can be used to rebuild libtool when needed
-LIBTOOL_DEPS="$ac_aux_dir/ltmain.sh"
-
-# Always use our own libtool.
-LIBTOOL='$(SHELL) $(top_builddir)/libtool'
-AC_SUBST(LIBTOOL)dnl
-
-# Prevent multiple expansion
-define([AC_PROG_LIBTOOL], [])
-])# _AC_PROG_LIBTOOL
-
-
-# AC_LIBTOOL_SETUP
-# ----------------
-AC_DEFUN([AC_LIBTOOL_SETUP],
-[AC_PREREQ(2.50)dnl
-AC_REQUIRE([AC_ENABLE_SHARED])dnl
-AC_REQUIRE([AC_ENABLE_STATIC])dnl
-AC_REQUIRE([AC_ENABLE_FAST_INSTALL])dnl
-AC_REQUIRE([AC_CANONICAL_HOST])dnl
-AC_REQUIRE([AC_CANONICAL_BUILD])dnl
-AC_REQUIRE([AC_PROG_CC])dnl
-AC_REQUIRE([AC_PROG_LD])dnl
-AC_REQUIRE([AC_PROG_LD_RELOAD_FLAG])dnl
-AC_REQUIRE([AC_PROG_NM])dnl
-
-AC_REQUIRE([AC_PROG_LN_S])dnl
-AC_REQUIRE([AC_DEPLIBS_CHECK_METHOD])dnl
-# Autoconf 2.13's AC_OBJEXT and AC_EXEEXT macros only works for C compilers!
-AC_REQUIRE([AC_OBJEXT])dnl
-AC_REQUIRE([AC_EXEEXT])dnl
-dnl
-AC_LIBTOOL_SYS_MAX_CMD_LEN
-AC_LIBTOOL_SYS_GLOBAL_SYMBOL_PIPE
-AC_LIBTOOL_OBJDIR
-
-AC_REQUIRE([_LT_AC_SYS_COMPILER])dnl
-_LT_AC_PROG_ECHO_BACKSLASH
-
-case $host_os in
-aix3*)
- # AIX sometimes has problems with the GCC collect2 program. For some
- # reason, if we set the COLLECT_NAMES environment variable, the problems
- # vanish in a puff of smoke.
- if test "X${COLLECT_NAMES+set}" != Xset; then
- COLLECT_NAMES=
- export COLLECT_NAMES
- fi
- ;;
-esac
-
-# Sed substitution that helps us do robust quoting. It backslashifies
-# metacharacters that are still active within double-quoted strings.
-Xsed='sed -e 1s/^X//'
-[sed_quote_subst='s/\([\\"\\`$\\\\]\)/\\\1/g']
-
-# Same as above, but do not quote variable references.
-[double_quote_subst='s/\([\\"\\`\\\\]\)/\\\1/g']
-
-# Sed substitution to delay expansion of an escaped shell variable in a
-# double_quote_subst'ed string.
-delay_variable_subst='s/\\\\\\\\\\\$/\\\\\\$/g'
-
-# Sed substitution to avoid accidental globbing in evaled expressions
-no_glob_subst='s/\*/\\\*/g'
-
-# Constants:
-rm="rm -f"
-
-# Global variables:
-default_ofile=libtool
-can_build_shared=yes
-
-# All known linkers require a `.a' archive for static linking (except MSVC,
-# which needs '.lib').
-libext=a
-ltmain="$ac_aux_dir/ltmain.sh"
-ofile="$default_ofile"
-with_gnu_ld="$lt_cv_prog_gnu_ld"
-
-AC_CHECK_TOOL(AR, ar, false)
-AC_CHECK_TOOL(RANLIB, ranlib, :)
-AC_CHECK_TOOL(STRIP, strip, :)
-
-old_CC="$CC"
-old_CFLAGS="$CFLAGS"
-
-# Set sane defaults for various variables
-test -z "$AR" && AR=ar
-test -z "$AR_FLAGS" && AR_FLAGS=cru
-test -z "$AS" && AS=as
-test -z "$CC" && CC=cc
-test -z "$LTCC" && LTCC=$CC
-test -z "$LTCFLAGS" && LTCFLAGS=$CFLAGS
-test -z "$DLLTOOL" && DLLTOOL=dlltool
-test -z "$LD" && LD=ld
-test -z "$LN_S" && LN_S="ln -s"
-test -z "$MAGIC_CMD" && MAGIC_CMD=file
-test -z "$NM" && NM=nm
-test -z "$SED" && SED=sed
-test -z "$OBJDUMP" && OBJDUMP=objdump
-test -z "$RANLIB" && RANLIB=:
-test -z "$STRIP" && STRIP=:
-test -z "$ac_objext" && ac_objext=o
-
-# Determine commands to create old-style static archives.
-old_archive_cmds='$AR $AR_FLAGS $oldlib$oldobjs'
-old_postinstall_cmds='chmod 644 $oldlib'
-old_postuninstall_cmds=
-
-if test -n "$RANLIB"; then
- case $host_os in
- openbsd*)
- old_postinstall_cmds="$old_postinstall_cmds~\$RANLIB -t \$oldlib"
- ;;
- *)
- old_postinstall_cmds="$old_postinstall_cmds~\$RANLIB \$oldlib"
- ;;
- esac
- old_archive_cmds="$old_archive_cmds~\$RANLIB \$oldlib"
-fi
-
-_LT_CC_BASENAME([$compiler])
-
-# Only perform the check for file, if the check method requires it
-case $deplibs_check_method in
-file_magic*)
- if test "$file_magic_cmd" = '$MAGIC_CMD'; then
- AC_PATH_MAGIC
- fi
- ;;
-esac
-
-_LT_REQUIRED_DARWIN_CHECKS
-
-AC_PROVIDE_IFELSE([AC_LIBTOOL_DLOPEN], enable_dlopen=yes, enable_dlopen=no)
-AC_PROVIDE_IFELSE([AC_LIBTOOL_WIN32_DLL],
-enable_win32_dll=yes, enable_win32_dll=no)
-
-AC_ARG_ENABLE([libtool-lock],
- [AC_HELP_STRING([--disable-libtool-lock],
- [avoid locking (might break parallel builds)])])
-test "x$enable_libtool_lock" != xno && enable_libtool_lock=yes
-
-AC_ARG_WITH([pic],
- [AC_HELP_STRING([--with-pic],
- [try to use only PIC/non-PIC objects @<:@default=use both@:>@])],
- [pic_mode="$withval"],
- [pic_mode=default])
-test -z "$pic_mode" && pic_mode=default
-
-# Use C for the default configuration in the libtool script
-tagname=
-AC_LIBTOOL_LANG_C_CONFIG
-_LT_AC_TAGCONFIG
-])# AC_LIBTOOL_SETUP
-
-
-# _LT_AC_SYS_COMPILER
-# -------------------
-AC_DEFUN([_LT_AC_SYS_COMPILER],
-[AC_REQUIRE([AC_PROG_CC])dnl
-
-# If no C compiler was specified, use CC.
-LTCC=${LTCC-"$CC"}
-
-# If no C compiler flags were specified, use CFLAGS.
-LTCFLAGS=${LTCFLAGS-"$CFLAGS"}
-
-# Allow CC to be a program name with arguments.
-compiler=$CC
-])# _LT_AC_SYS_COMPILER
-
-
-# _LT_CC_BASENAME(CC)
-# -------------------
-# Calculate cc_basename. Skip known compiler wrappers and cross-prefix.
-AC_DEFUN([_LT_CC_BASENAME],
-[for cc_temp in $1""; do
- case $cc_temp in
- compile | *[[\\/]]compile | ccache | *[[\\/]]ccache ) ;;
- distcc | *[[\\/]]distcc | purify | *[[\\/]]purify ) ;;
- \-*) ;;
- *) break;;
- esac
-done
-cc_basename=`$echo "X$cc_temp" | $Xsed -e 's%.*/%%' -e "s%^$host_alias-%%"`
-])
-
-
-# _LT_COMPILER_BOILERPLATE
-# ------------------------
-# Check for compiler boilerplate output or warnings with
-# the simple compiler test code.
-AC_DEFUN([_LT_COMPILER_BOILERPLATE],
-[AC_REQUIRE([LT_AC_PROG_SED])dnl
-ac_outfile=conftest.$ac_objext
-echo "$lt_simple_compile_test_code" >conftest.$ac_ext
-eval "$ac_compile" 2>&1 >/dev/null | $SED '/^$/d; /^ *+/d' >conftest.err
-_lt_compiler_boilerplate=`cat conftest.err`
-$rm conftest*
-])# _LT_COMPILER_BOILERPLATE
-
-
-# _LT_LINKER_BOILERPLATE
-# ----------------------
-# Check for linker boilerplate output or warnings with
-# the simple link test code.
-AC_DEFUN([_LT_LINKER_BOILERPLATE],
-[AC_REQUIRE([LT_AC_PROG_SED])dnl
-ac_outfile=conftest.$ac_objext
-echo "$lt_simple_link_test_code" >conftest.$ac_ext
-eval "$ac_link" 2>&1 >/dev/null | $SED '/^$/d; /^ *+/d' >conftest.err
-_lt_linker_boilerplate=`cat conftest.err`
-$rm -r conftest*
-])# _LT_LINKER_BOILERPLATE
-
-# _LT_REQUIRED_DARWIN_CHECKS
-# --------------------------
-# Check for some things on darwin
-AC_DEFUN([_LT_REQUIRED_DARWIN_CHECKS],[
- case $host_os in
- rhapsody* | darwin*)
- AC_CHECK_TOOL([DSYMUTIL], [dsymutil], [:])
- AC_CHECK_TOOL([NMEDIT], [nmedit], [:])
-
- AC_CACHE_CHECK([for -single_module linker flag],[lt_cv_apple_cc_single_mod],
- [lt_cv_apple_cc_single_mod=no
- if test -z "${LT_MULTI_MODULE}"; then
- # By default we will add the -single_module flag. You can override
- # by either setting the environment variable LT_MULTI_MODULE
- # non-empty at configure time, or by adding -multi_module to the
- # link flags.
- echo "int foo(void){return 1;}" > conftest.c
- $LTCC $LTCFLAGS $LDFLAGS -o libconftest.dylib \
- -dynamiclib ${wl}-single_module conftest.c
- if test -f libconftest.dylib; then
- lt_cv_apple_cc_single_mod=yes
- rm -rf libconftest.dylib*
- fi
- rm conftest.c
- fi])
- AC_CACHE_CHECK([for -exported_symbols_list linker flag],
- [lt_cv_ld_exported_symbols_list],
- [lt_cv_ld_exported_symbols_list=no
- save_LDFLAGS=$LDFLAGS
- echo "_main" > conftest.sym
- LDFLAGS="$LDFLAGS -Wl,-exported_symbols_list,conftest.sym"
- AC_LINK_IFELSE([AC_LANG_PROGRAM([],[])],
- [lt_cv_ld_exported_symbols_list=yes],
- [lt_cv_ld_exported_symbols_list=no])
- LDFLAGS="$save_LDFLAGS"
- ])
- case $host_os in
- rhapsody* | darwin1.[[0123]])
- _lt_dar_allow_undefined='${wl}-undefined ${wl}suppress' ;;
- darwin1.*)
- _lt_dar_allow_undefined='${wl}-flat_namespace ${wl}-undefined ${wl}suppress' ;;
- darwin*)
- # if running on 10.5 or later, the deployment target defaults
- # to the OS version, if on x86, and 10.4, the deployment
- # target defaults to 10.4. Don't you love it?
- case ${MACOSX_DEPLOYMENT_TARGET-10.0},$host in
- 10.0,*86*-darwin8*|10.0,*-darwin[[91]]*)
- _lt_dar_allow_undefined='${wl}-undefined ${wl}dynamic_lookup' ;;
- 10.[[012]]*)
- _lt_dar_allow_undefined='${wl}-flat_namespace ${wl}-undefined ${wl}suppress' ;;
- 10.*)
- _lt_dar_allow_undefined='${wl}-undefined ${wl}dynamic_lookup' ;;
- esac
- ;;
- esac
- if test "$lt_cv_apple_cc_single_mod" = "yes"; then
- _lt_dar_single_mod='$single_module'
- fi
- if test "$lt_cv_ld_exported_symbols_list" = "yes"; then
- _lt_dar_export_syms=' ${wl}-exported_symbols_list,$output_objdir/${libname}-symbols.expsym'
- else
- _lt_dar_export_syms="~$NMEDIT -s \$output_objdir/\${libname}-symbols.expsym \${lib}"
- fi
- if test "$DSYMUTIL" != ":"; then
- _lt_dsymutil="~$DSYMUTIL \$lib || :"
- else
- _lt_dsymutil=
- fi
- ;;
- esac
-])
-
-# _LT_AC_SYS_LIBPATH_AIX
-# ----------------------
-# Links a minimal program and checks the executable
-# for the system default hardcoded library path. In most cases,
-# this is /usr/lib:/lib, but when the MPI compilers are used
-# the location of the communication and MPI libs are included too.
-# If we don't find anything, use the default library path according
-# to the aix ld manual.
-AC_DEFUN([_LT_AC_SYS_LIBPATH_AIX],
-[AC_REQUIRE([LT_AC_PROG_SED])dnl
-AC_LINK_IFELSE(AC_LANG_PROGRAM,[
-lt_aix_libpath_sed='
- /Import File Strings/,/^$/ {
- /^0/ {
- s/^0 *\(.*\)$/\1/
- p
- }
- }'
-aix_libpath=`dump -H conftest$ac_exeext 2>/dev/null | $SED -n -e "$lt_aix_libpath_sed"`
-# Check for a 64-bit object if we didn't find anything.
-if test -z "$aix_libpath"; then
- aix_libpath=`dump -HX64 conftest$ac_exeext 2>/dev/null | $SED -n -e "$lt_aix_libpath_sed"`
-fi],[])
-if test -z "$aix_libpath"; then aix_libpath="/usr/lib:/lib"; fi
-])# _LT_AC_SYS_LIBPATH_AIX
-
-
-# _LT_AC_SHELL_INIT(ARG)
-# ----------------------
-AC_DEFUN([_LT_AC_SHELL_INIT],
-[ifdef([AC_DIVERSION_NOTICE],
- [AC_DIVERT_PUSH(AC_DIVERSION_NOTICE)],
- [AC_DIVERT_PUSH(NOTICE)])
-$1
-AC_DIVERT_POP
-])# _LT_AC_SHELL_INIT
-
-
-# _LT_AC_PROG_ECHO_BACKSLASH
-# --------------------------
-# Add some code to the start of the generated configure script which
-# will find an echo command which doesn't interpret backslashes.
-AC_DEFUN([_LT_AC_PROG_ECHO_BACKSLASH],
-[_LT_AC_SHELL_INIT([
-# Check that we are running under the correct shell.
-SHELL=${CONFIG_SHELL-/bin/sh}
-
-case X$ECHO in
-X*--fallback-echo)
- # Remove one level of quotation (which was required for Make).
- ECHO=`echo "$ECHO" | sed 's,\\\\\[$]\\[$]0,'[$]0','`
- ;;
-esac
-
-echo=${ECHO-echo}
-if test "X[$]1" = X--no-reexec; then
- # Discard the --no-reexec flag, and continue.
- shift
-elif test "X[$]1" = X--fallback-echo; then
- # Avoid inline document here, it may be left over
- :
-elif test "X`($echo '\t') 2>/dev/null`" = 'X\t' ; then
- # Yippee, $echo works!
- :
-else
- # Restart under the correct shell.
- exec $SHELL "[$]0" --no-reexec ${1+"[$]@"}
-fi
-
-if test "X[$]1" = X--fallback-echo; then
- # used as fallback echo
- shift
- cat <<EOF
-[$]*
-EOF
- exit 0
-fi
-
-# The HP-UX ksh and POSIX shell print the target directory to stdout
-# if CDPATH is set.
-(unset CDPATH) >/dev/null 2>&1 && unset CDPATH
-
-if test -z "$ECHO"; then
-if test "X${echo_test_string+set}" != Xset; then
-# find a string as large as possible, as long as the shell can cope with it
- for cmd in 'sed 50q "[$]0"' 'sed 20q "[$]0"' 'sed 10q "[$]0"' 'sed 2q "[$]0"' 'echo test'; do
- # expected sizes: less than 2Kb, 1Kb, 512 bytes, 16 bytes, ...
- if (echo_test_string=`eval $cmd`) 2>/dev/null &&
- echo_test_string=`eval $cmd` &&
- (test "X$echo_test_string" = "X$echo_test_string") 2>/dev/null
- then
- break
- fi
- done
-fi
-
-if test "X`($echo '\t') 2>/dev/null`" = 'X\t' &&
- echo_testing_string=`($echo "$echo_test_string") 2>/dev/null` &&
- test "X$echo_testing_string" = "X$echo_test_string"; then
- :
-else
- # The Solaris, AIX, and Digital Unix default echo programs unquote
- # backslashes. This makes it impossible to quote backslashes using
- # echo "$something" | sed 's/\\/\\\\/g'
- #
- # So, first we look for a working echo in the user's PATH.
-
- lt_save_ifs="$IFS"; IFS=$PATH_SEPARATOR
- for dir in $PATH /usr/ucb; do
- IFS="$lt_save_ifs"
- if (test -f $dir/echo || test -f $dir/echo$ac_exeext) &&
- test "X`($dir/echo '\t') 2>/dev/null`" = 'X\t' &&
- echo_testing_string=`($dir/echo "$echo_test_string") 2>/dev/null` &&
- test "X$echo_testing_string" = "X$echo_test_string"; then
- echo="$dir/echo"
- break
- fi
- done
- IFS="$lt_save_ifs"
-
- if test "X$echo" = Xecho; then
- # We didn't find a better echo, so look for alternatives.
- if test "X`(print -r '\t') 2>/dev/null`" = 'X\t' &&
- echo_testing_string=`(print -r "$echo_test_string") 2>/dev/null` &&
- test "X$echo_testing_string" = "X$echo_test_string"; then
- # This shell has a builtin print -r that does the trick.
- echo='print -r'
- elif (test -f /bin/ksh || test -f /bin/ksh$ac_exeext) &&
- test "X$CONFIG_SHELL" != X/bin/ksh; then
- # If we have ksh, try running configure again with it.
- ORIGINAL_CONFIG_SHELL=${CONFIG_SHELL-/bin/sh}
- export ORIGINAL_CONFIG_SHELL
- CONFIG_SHELL=/bin/ksh
- export CONFIG_SHELL
- exec $CONFIG_SHELL "[$]0" --no-reexec ${1+"[$]@"}
- else
- # Try using printf.
- echo='printf %s\n'
- if test "X`($echo '\t') 2>/dev/null`" = 'X\t' &&
- echo_testing_string=`($echo "$echo_test_string") 2>/dev/null` &&
- test "X$echo_testing_string" = "X$echo_test_string"; then
- # Cool, printf works
- :
- elif echo_testing_string=`($ORIGINAL_CONFIG_SHELL "[$]0" --fallback-echo '\t') 2>/dev/null` &&
- test "X$echo_testing_string" = 'X\t' &&
- echo_testing_string=`($ORIGINAL_CONFIG_SHELL "[$]0" --fallback-echo "$echo_test_string") 2>/dev/null` &&
- test "X$echo_testing_string" = "X$echo_test_string"; then
- CONFIG_SHELL=$ORIGINAL_CONFIG_SHELL
- export CONFIG_SHELL
- SHELL="$CONFIG_SHELL"
- export SHELL
- echo="$CONFIG_SHELL [$]0 --fallback-echo"
- elif echo_testing_string=`($CONFIG_SHELL "[$]0" --fallback-echo '\t') 2>/dev/null` &&
- test "X$echo_testing_string" = 'X\t' &&
- echo_testing_string=`($CONFIG_SHELL "[$]0" --fallback-echo "$echo_test_string") 2>/dev/null` &&
- test "X$echo_testing_string" = "X$echo_test_string"; then
- echo="$CONFIG_SHELL [$]0 --fallback-echo"
- else
- # maybe with a smaller string...
- prev=:
-
- for cmd in 'echo test' 'sed 2q "[$]0"' 'sed 10q "[$]0"' 'sed 20q "[$]0"' 'sed 50q "[$]0"'; do
- if (test "X$echo_test_string" = "X`eval $cmd`") 2>/dev/null
- then
- break
- fi
- prev="$cmd"
- done
-
- if test "$prev" != 'sed 50q "[$]0"'; then
- echo_test_string=`eval $prev`
- export echo_test_string
- exec ${ORIGINAL_CONFIG_SHELL-${CONFIG_SHELL-/bin/sh}} "[$]0" ${1+"[$]@"}
- else
- # Oops. We lost completely, so just stick with echo.
- echo=echo
- fi
- fi
- fi
- fi
-fi
-fi
-
-# Copy echo and quote the copy suitably for passing to libtool from
-# the Makefile, instead of quoting the original, which is used later.
-ECHO=$echo
-if test "X$ECHO" = "X$CONFIG_SHELL [$]0 --fallback-echo"; then
- ECHO="$CONFIG_SHELL \\\$\[$]0 --fallback-echo"
-fi
-
-AC_SUBST(ECHO)
-])])# _LT_AC_PROG_ECHO_BACKSLASH
-
-
-# _LT_AC_LOCK
-# -----------
-AC_DEFUN([_LT_AC_LOCK],
-[AC_ARG_ENABLE([libtool-lock],
- [AC_HELP_STRING([--disable-libtool-lock],
- [avoid locking (might break parallel builds)])])
-test "x$enable_libtool_lock" != xno && enable_libtool_lock=yes
-
-# Some flags need to be propagated to the compiler or linker for good
-# libtool support.
-case $host in
-ia64-*-hpux*)
- # Find out which ABI we are using.
- echo 'int i;' > conftest.$ac_ext
- if AC_TRY_EVAL(ac_compile); then
- case `/usr/bin/file conftest.$ac_objext` in
- *ELF-32*)
- HPUX_IA64_MODE="32"
- ;;
- *ELF-64*)
- HPUX_IA64_MODE="64"
- ;;
- esac
- fi
- rm -rf conftest*
- ;;
-*-*-irix6*)
- # Find out which ABI we are using.
- echo '[#]line __oline__ "configure"' > conftest.$ac_ext
- if AC_TRY_EVAL(ac_compile); then
- if test "$lt_cv_prog_gnu_ld" = yes; then
- case `/usr/bin/file conftest.$ac_objext` in
- *32-bit*)
- LD="${LD-ld} -melf32bsmip"
- ;;
- *N32*)
- LD="${LD-ld} -melf32bmipn32"
- ;;
- *64-bit*)
- LD="${LD-ld} -melf64bmip"
- ;;
- esac
- else
- case `/usr/bin/file conftest.$ac_objext` in
- *32-bit*)
- LD="${LD-ld} -32"
- ;;
- *N32*)
- LD="${LD-ld} -n32"
- ;;
- *64-bit*)
- LD="${LD-ld} -64"
- ;;
- esac
- fi
- fi
- rm -rf conftest*
- ;;
-
-x86_64-*kfreebsd*-gnu|x86_64-*linux*|ppc*-*linux*|powerpc*-*linux*| \
-s390*-*linux*|sparc*-*linux*)
- # Find out which ABI we are using.
- echo 'int i;' > conftest.$ac_ext
- if AC_TRY_EVAL(ac_compile); then
- case `/usr/bin/file conftest.o` in
- *32-bit*)
- case $host in
- x86_64-*kfreebsd*-gnu)
- LD="${LD-ld} -m elf_i386_fbsd"
- ;;
- x86_64-*linux*)
- LD="${LD-ld} -m elf_i386"
- ;;
- ppc64-*linux*|powerpc64-*linux*)
- LD="${LD-ld} -m elf32ppclinux"
- ;;
- s390x-*linux*)
- LD="${LD-ld} -m elf_s390"
- ;;
- sparc64-*linux*)
- LD="${LD-ld} -m elf32_sparc"
- ;;
- esac
- ;;
- *64-bit*)
- case $host in
- x86_64-*kfreebsd*-gnu)
- LD="${LD-ld} -m elf_x86_64_fbsd"
- ;;
- x86_64-*linux*)
- LD="${LD-ld} -m elf_x86_64"
- ;;
- ppc*-*linux*|powerpc*-*linux*)
- LD="${LD-ld} -m elf64ppc"
- ;;
- s390*-*linux*)
- LD="${LD-ld} -m elf64_s390"
- ;;
- sparc*-*linux*)
- LD="${LD-ld} -m elf64_sparc"
- ;;
- esac
- ;;
- esac
- fi
- rm -rf conftest*
- ;;
-
-*-*-sco3.2v5*)
- # On SCO OpenServer 5, we need -belf to get full-featured binaries.
- SAVE_CFLAGS="$CFLAGS"
- CFLAGS="$CFLAGS -belf"
- AC_CACHE_CHECK([whether the C compiler needs -belf], lt_cv_cc_needs_belf,
- [AC_LANG_PUSH(C)
- AC_TRY_LINK([],[],[lt_cv_cc_needs_belf=yes],[lt_cv_cc_needs_belf=no])
- AC_LANG_POP])
- if test x"$lt_cv_cc_needs_belf" != x"yes"; then
- # this is probably gcc 2.8.0, egcs 1.0 or newer; no need for -belf
- CFLAGS="$SAVE_CFLAGS"
- fi
- ;;
-sparc*-*solaris*)
- # Find out which ABI we are using.
- echo 'int i;' > conftest.$ac_ext
- if AC_TRY_EVAL(ac_compile); then
- case `/usr/bin/file conftest.o` in
- *64-bit*)
- case $lt_cv_prog_gnu_ld in
- yes*) LD="${LD-ld} -m elf64_sparc" ;;
- *)
- if ${LD-ld} -64 -r -o conftest2.o conftest.o >/dev/null 2>&1; then
- LD="${LD-ld} -64"
- fi
- ;;
- esac
- ;;
- esac
- fi
- rm -rf conftest*
- ;;
-
-AC_PROVIDE_IFELSE([AC_LIBTOOL_WIN32_DLL],
-[*-*-cygwin* | *-*-mingw* | *-*-pw32*)
- AC_CHECK_TOOL(DLLTOOL, dlltool, false)
- AC_CHECK_TOOL(AS, as, false)
- AC_CHECK_TOOL(OBJDUMP, objdump, false)
- ;;
- ])
-esac
-
-need_locks="$enable_libtool_lock"
-
-])# _LT_AC_LOCK
-
-
-# AC_LIBTOOL_COMPILER_OPTION(MESSAGE, VARIABLE-NAME, FLAGS,
-# [OUTPUT-FILE], [ACTION-SUCCESS], [ACTION-FAILURE])
-# ----------------------------------------------------------------
-# Check whether the given compiler option works
-AC_DEFUN([AC_LIBTOOL_COMPILER_OPTION],
-[AC_REQUIRE([LT_AC_PROG_SED])
-AC_CACHE_CHECK([$1], [$2],
- [$2=no
- ifelse([$4], , [ac_outfile=conftest.$ac_objext], [ac_outfile=$4])
- echo "$lt_simple_compile_test_code" > conftest.$ac_ext
- lt_compiler_flag="$3"
- # Insert the option either (1) after the last *FLAGS variable, or
- # (2) before a word containing "conftest.", or (3) at the end.
- # Note that $ac_compile itself does not contain backslashes and begins
- # with a dollar sign (not a hyphen), so the echo should work correctly.
- # The option is referenced via a variable to avoid confusing sed.
- lt_compile=`echo "$ac_compile" | $SED \
- -e 's:.*FLAGS}\{0,1\} :&$lt_compiler_flag :; t' \
- -e 's: [[^ ]]*conftest\.: $lt_compiler_flag&:; t' \
- -e 's:$: $lt_compiler_flag:'`
- (eval echo "\"\$as_me:__oline__: $lt_compile\"" >&AS_MESSAGE_LOG_FD)
- (eval "$lt_compile" 2>conftest.err)
- ac_status=$?
- cat conftest.err >&AS_MESSAGE_LOG_FD
- echo "$as_me:__oline__: \$? = $ac_status" >&AS_MESSAGE_LOG_FD
- if (exit $ac_status) && test -s "$ac_outfile"; then
- # The compiler can only warn and ignore the option if not recognized
- # So say no if there are warnings other than the usual output.
- $echo "X$_lt_compiler_boilerplate" | $Xsed -e '/^$/d' >conftest.exp
- $SED '/^$/d; /^ *+/d' conftest.err >conftest.er2
- if test ! -s conftest.er2 || diff conftest.exp conftest.er2 >/dev/null; then
- $2=yes
- fi
- fi
- $rm conftest*
-])
-
-if test x"[$]$2" = xyes; then
- ifelse([$5], , :, [$5])
-else
- ifelse([$6], , :, [$6])
-fi
-])# AC_LIBTOOL_COMPILER_OPTION
-
-
-# AC_LIBTOOL_LINKER_OPTION(MESSAGE, VARIABLE-NAME, FLAGS,
-# [ACTION-SUCCESS], [ACTION-FAILURE])
-# ------------------------------------------------------------
-# Check whether the given compiler option works
-AC_DEFUN([AC_LIBTOOL_LINKER_OPTION],
-[AC_REQUIRE([LT_AC_PROG_SED])dnl
-AC_CACHE_CHECK([$1], [$2],
- [$2=no
- save_LDFLAGS="$LDFLAGS"
- LDFLAGS="$LDFLAGS $3"
- echo "$lt_simple_link_test_code" > conftest.$ac_ext
- if (eval $ac_link 2>conftest.err) && test -s conftest$ac_exeext; then
- # The linker can only warn and ignore the option if not recognized
- # So say no if there are warnings
- if test -s conftest.err; then
- # Append any errors to the config.log.
- cat conftest.err 1>&AS_MESSAGE_LOG_FD
- $echo "X$_lt_linker_boilerplate" | $Xsed -e '/^$/d' > conftest.exp
- $SED '/^$/d; /^ *+/d' conftest.err >conftest.er2
- if diff conftest.exp conftest.er2 >/dev/null; then
- $2=yes
- fi
- else
- $2=yes
- fi
- fi
- $rm -r conftest*
- LDFLAGS="$save_LDFLAGS"
-])
-
-if test x"[$]$2" = xyes; then
- ifelse([$4], , :, [$4])
-else
- ifelse([$5], , :, [$5])
-fi
-])# AC_LIBTOOL_LINKER_OPTION
-
-
-# AC_LIBTOOL_SYS_MAX_CMD_LEN
-# --------------------------
-AC_DEFUN([AC_LIBTOOL_SYS_MAX_CMD_LEN],
-[# find the maximum length of command line arguments
-AC_MSG_CHECKING([the maximum length of command line arguments])
-AC_CACHE_VAL([lt_cv_sys_max_cmd_len], [dnl
- i=0
- teststring="ABCD"
-
- case $build_os in
- msdosdjgpp*)
- # On DJGPP, this test can blow up pretty badly due to problems in libc
- # (any single argument exceeding 2000 bytes causes a buffer overrun
- # during glob expansion). Even if it were fixed, the result of this
- # check would be larger than it should be.
- lt_cv_sys_max_cmd_len=12288; # 12K is about right
- ;;
-
- gnu*)
- # Under GNU Hurd, this test is not required because there is
- # no limit to the length of command line arguments.
- # Libtool will interpret -1 as no limit whatsoever
- lt_cv_sys_max_cmd_len=-1;
- ;;
-
- cygwin* | mingw*)
- # On Win9x/ME, this test blows up -- it succeeds, but takes
- # about 5 minutes as the teststring grows exponentially.
- # Worse, since 9x/ME are not pre-emptively multitasking,
- # you end up with a "frozen" computer, even though with patience
- # the test eventually succeeds (with a max line length of 256k).
- # Instead, let's just punt: use the minimum linelength reported by
- # all of the supported platforms: 8192 (on NT/2K/XP).
- lt_cv_sys_max_cmd_len=8192;
- ;;
-
- amigaos*)
- # On AmigaOS with pdksh, this test takes hours, literally.
- # So we just punt and use a minimum line length of 8192.
- lt_cv_sys_max_cmd_len=8192;
- ;;
-
- netbsd* | freebsd* | openbsd* | darwin* | dragonfly*)
- # This has been around since 386BSD, at least. Likely further.
- if test -x /sbin/sysctl; then
- lt_cv_sys_max_cmd_len=`/sbin/sysctl -n kern.argmax`
- elif test -x /usr/sbin/sysctl; then
- lt_cv_sys_max_cmd_len=`/usr/sbin/sysctl -n kern.argmax`
- else
- lt_cv_sys_max_cmd_len=65536 # usable default for all BSDs
- fi
- # And add a safety zone
- lt_cv_sys_max_cmd_len=`expr $lt_cv_sys_max_cmd_len \/ 4`
- lt_cv_sys_max_cmd_len=`expr $lt_cv_sys_max_cmd_len \* 3`
- ;;
-
- interix*)
- # We know the value 262144 and hardcode it with a safety zone (like BSD)
- lt_cv_sys_max_cmd_len=196608
- ;;
-
- osf*)
- # Dr. Hans Ekkehard Plesser reports seeing a kernel panic running configure
- # due to this test when exec_disable_arg_limit is 1 on Tru64. It is not
- # nice to cause kernel panics so lets avoid the loop below.
- # First set a reasonable default.
- lt_cv_sys_max_cmd_len=16384
- #
- if test -x /sbin/sysconfig; then
- case `/sbin/sysconfig -q proc exec_disable_arg_limit` in
- *1*) lt_cv_sys_max_cmd_len=-1 ;;
- esac
- fi
- ;;
- sco3.2v5*)
- lt_cv_sys_max_cmd_len=102400
- ;;
- sysv5* | sco5v6* | sysv4.2uw2*)
- kargmax=`grep ARG_MAX /etc/conf/cf.d/stune 2>/dev/null`
- if test -n "$kargmax"; then
- lt_cv_sys_max_cmd_len=`echo $kargmax | sed 's/.*[[ ]]//'`
- else
- lt_cv_sys_max_cmd_len=32768
- fi
- ;;
- *)
- lt_cv_sys_max_cmd_len=`(getconf ARG_MAX) 2> /dev/null`
- if test -n "$lt_cv_sys_max_cmd_len"; then
- lt_cv_sys_max_cmd_len=`expr $lt_cv_sys_max_cmd_len \/ 4`
- lt_cv_sys_max_cmd_len=`expr $lt_cv_sys_max_cmd_len \* 3`
- else
- SHELL=${SHELL-${CONFIG_SHELL-/bin/sh}}
- while (test "X"`$SHELL [$]0 --fallback-echo "X$teststring" 2>/dev/null` \
- = "XX$teststring") >/dev/null 2>&1 &&
- new_result=`expr "X$teststring" : ".*" 2>&1` &&
- lt_cv_sys_max_cmd_len=$new_result &&
- test $i != 17 # 1/2 MB should be enough
- do
- i=`expr $i + 1`
- teststring=$teststring$teststring
- done
- teststring=
- # Add a significant safety factor because C++ compilers can tack on massive
- # amounts of additional arguments before passing them to the linker.
- # It appears as though 1/2 is a usable value.
- lt_cv_sys_max_cmd_len=`expr $lt_cv_sys_max_cmd_len \/ 2`
- fi
- ;;
- esac
-])
-if test -n $lt_cv_sys_max_cmd_len ; then
- AC_MSG_RESULT($lt_cv_sys_max_cmd_len)
-else
- AC_MSG_RESULT(none)
-fi
-])# AC_LIBTOOL_SYS_MAX_CMD_LEN
-
-
-# _LT_AC_CHECK_DLFCN
-# ------------------
-AC_DEFUN([_LT_AC_CHECK_DLFCN],
-[AC_CHECK_HEADERS(dlfcn.h)dnl
-])# _LT_AC_CHECK_DLFCN
-
-
-# _LT_AC_TRY_DLOPEN_SELF (ACTION-IF-TRUE, ACTION-IF-TRUE-W-USCORE,
-# ACTION-IF-FALSE, ACTION-IF-CROSS-COMPILING)
-# ---------------------------------------------------------------------
-AC_DEFUN([_LT_AC_TRY_DLOPEN_SELF],
-[AC_REQUIRE([_LT_AC_CHECK_DLFCN])dnl
-if test "$cross_compiling" = yes; then :
- [$4]
-else
- lt_dlunknown=0; lt_dlno_uscore=1; lt_dlneed_uscore=2
- lt_status=$lt_dlunknown
- cat > conftest.$ac_ext <<EOF
-[#line __oline__ "configure"
-#include "confdefs.h"
-
-#if HAVE_DLFCN_H
-#include <dlfcn.h>
-#endif
-
-#include <stdio.h>
-
-#ifdef RTLD_GLOBAL
-# define LT_DLGLOBAL RTLD_GLOBAL
-#else
-# ifdef DL_GLOBAL
-# define LT_DLGLOBAL DL_GLOBAL
-# else
-# define LT_DLGLOBAL 0
-# endif
-#endif
-
-/* We may have to define LT_DLLAZY_OR_NOW in the command line if we
- find out it does not work in some platform. */
-#ifndef LT_DLLAZY_OR_NOW
-# ifdef RTLD_LAZY
-# define LT_DLLAZY_OR_NOW RTLD_LAZY
-# else
-# ifdef DL_LAZY
-# define LT_DLLAZY_OR_NOW DL_LAZY
-# else
-# ifdef RTLD_NOW
-# define LT_DLLAZY_OR_NOW RTLD_NOW
-# else
-# ifdef DL_NOW
-# define LT_DLLAZY_OR_NOW DL_NOW
-# else
-# define LT_DLLAZY_OR_NOW 0
-# endif
-# endif
-# endif
-# endif
-#endif
-
-#ifdef __cplusplus
-extern "C" void exit (int);
-#endif
-
-void fnord() { int i=42;}
-int main ()
-{
- void *self = dlopen (0, LT_DLGLOBAL|LT_DLLAZY_OR_NOW);
- int status = $lt_dlunknown;
-
- if (self)
- {
- if (dlsym (self,"fnord")) status = $lt_dlno_uscore;
- else if (dlsym( self,"_fnord")) status = $lt_dlneed_uscore;
- /* dlclose (self); */
- }
- else
- puts (dlerror ());
-
- exit (status);
-}]
-EOF
- if AC_TRY_EVAL(ac_link) && test -s conftest${ac_exeext} 2>/dev/null; then
- (./conftest; exit; ) >&AS_MESSAGE_LOG_FD 2>/dev/null
- lt_status=$?
- case x$lt_status in
- x$lt_dlno_uscore) $1 ;;
- x$lt_dlneed_uscore) $2 ;;
- x$lt_dlunknown|x*) $3 ;;
- esac
- else :
- # compilation failed
- $3
- fi
-fi
-rm -fr conftest*
-])# _LT_AC_TRY_DLOPEN_SELF
-
-
-# AC_LIBTOOL_DLOPEN_SELF
-# ----------------------
-AC_DEFUN([AC_LIBTOOL_DLOPEN_SELF],
-[AC_REQUIRE([_LT_AC_CHECK_DLFCN])dnl
-if test "x$enable_dlopen" != xyes; then
- enable_dlopen=unknown
- enable_dlopen_self=unknown
- enable_dlopen_self_static=unknown
-else
- lt_cv_dlopen=no
- lt_cv_dlopen_libs=
-
- case $host_os in
- beos*)
- lt_cv_dlopen="load_add_on"
- lt_cv_dlopen_libs=
- lt_cv_dlopen_self=yes
- ;;
-
- mingw* | pw32*)
- lt_cv_dlopen="LoadLibrary"
- lt_cv_dlopen_libs=
- ;;
-
- cygwin*)
- lt_cv_dlopen="dlopen"
- lt_cv_dlopen_libs=
- ;;
-
- darwin*)
- # if libdl is installed we need to link against it
- AC_CHECK_LIB([dl], [dlopen],
- [lt_cv_dlopen="dlopen" lt_cv_dlopen_libs="-ldl"],[
- lt_cv_dlopen="dyld"
- lt_cv_dlopen_libs=
- lt_cv_dlopen_self=yes
- ])
- ;;
-
- *)
- AC_CHECK_FUNC([shl_load],
- [lt_cv_dlopen="shl_load"],
- [AC_CHECK_LIB([dld], [shl_load],
- [lt_cv_dlopen="shl_load" lt_cv_dlopen_libs="-ldld"],
- [AC_CHECK_FUNC([dlopen],
- [lt_cv_dlopen="dlopen"],
- [AC_CHECK_LIB([dl], [dlopen],
- [lt_cv_dlopen="dlopen" lt_cv_dlopen_libs="-ldl"],
- [AC_CHECK_LIB([svld], [dlopen],
- [lt_cv_dlopen="dlopen" lt_cv_dlopen_libs="-lsvld"],
- [AC_CHECK_LIB([dld], [dld_link],
- [lt_cv_dlopen="dld_link" lt_cv_dlopen_libs="-ldld"])
- ])
- ])
- ])
- ])
- ])
- ;;
- esac
-
- if test "x$lt_cv_dlopen" != xno; then
- enable_dlopen=yes
- else
- enable_dlopen=no
- fi
-
- case $lt_cv_dlopen in
- dlopen)
- save_CPPFLAGS="$CPPFLAGS"
- test "x$ac_cv_header_dlfcn_h" = xyes && CPPFLAGS="$CPPFLAGS -DHAVE_DLFCN_H"
-
- save_LDFLAGS="$LDFLAGS"
- wl=$lt_prog_compiler_wl eval LDFLAGS=\"\$LDFLAGS $export_dynamic_flag_spec\"
-
- save_LIBS="$LIBS"
- LIBS="$lt_cv_dlopen_libs $LIBS"
-
- AC_CACHE_CHECK([whether a program can dlopen itself],
- lt_cv_dlopen_self, [dnl
- _LT_AC_TRY_DLOPEN_SELF(
- lt_cv_dlopen_self=yes, lt_cv_dlopen_self=yes,
- lt_cv_dlopen_self=no, lt_cv_dlopen_self=cross)
- ])
-
- if test "x$lt_cv_dlopen_self" = xyes; then
- wl=$lt_prog_compiler_wl eval LDFLAGS=\"\$LDFLAGS $lt_prog_compiler_static\"
- AC_CACHE_CHECK([whether a statically linked program can dlopen itself],
- lt_cv_dlopen_self_static, [dnl
- _LT_AC_TRY_DLOPEN_SELF(
- lt_cv_dlopen_self_static=yes, lt_cv_dlopen_self_static=yes,
- lt_cv_dlopen_self_static=no, lt_cv_dlopen_self_static=cross)
- ])
- fi
-
- CPPFLAGS="$save_CPPFLAGS"
- LDFLAGS="$save_LDFLAGS"
- LIBS="$save_LIBS"
- ;;
- esac
-
- case $lt_cv_dlopen_self in
- yes|no) enable_dlopen_self=$lt_cv_dlopen_self ;;
- *) enable_dlopen_self=unknown ;;
- esac
-
- case $lt_cv_dlopen_self_static in
- yes|no) enable_dlopen_self_static=$lt_cv_dlopen_self_static ;;
- *) enable_dlopen_self_static=unknown ;;
- esac
-fi
-])# AC_LIBTOOL_DLOPEN_SELF
-
-
-# AC_LIBTOOL_PROG_CC_C_O([TAGNAME])
-# ---------------------------------
-# Check to see if options -c and -o are simultaneously supported by compiler
-AC_DEFUN([AC_LIBTOOL_PROG_CC_C_O],
-[AC_REQUIRE([LT_AC_PROG_SED])dnl
-AC_REQUIRE([_LT_AC_SYS_COMPILER])dnl
-AC_CACHE_CHECK([if $compiler supports -c -o file.$ac_objext],
- [_LT_AC_TAGVAR(lt_cv_prog_compiler_c_o, $1)],
- [_LT_AC_TAGVAR(lt_cv_prog_compiler_c_o, $1)=no
- $rm -r conftest 2>/dev/null
- mkdir conftest
- cd conftest
- mkdir out
- echo "$lt_simple_compile_test_code" > conftest.$ac_ext
-
- lt_compiler_flag="-o out/conftest2.$ac_objext"
- # Insert the option either (1) after the last *FLAGS variable, or
- # (2) before a word containing "conftest.", or (3) at the end.
- # Note that $ac_compile itself does not contain backslashes and begins
- # with a dollar sign (not a hyphen), so the echo should work correctly.
- lt_compile=`echo "$ac_compile" | $SED \
- -e 's:.*FLAGS}\{0,1\} :&$lt_compiler_flag :; t' \
- -e 's: [[^ ]]*conftest\.: $lt_compiler_flag&:; t' \
- -e 's:$: $lt_compiler_flag:'`
- (eval echo "\"\$as_me:__oline__: $lt_compile\"" >&AS_MESSAGE_LOG_FD)
- (eval "$lt_compile" 2>out/conftest.err)
- ac_status=$?
- cat out/conftest.err >&AS_MESSAGE_LOG_FD
- echo "$as_me:__oline__: \$? = $ac_status" >&AS_MESSAGE_LOG_FD
- if (exit $ac_status) && test -s out/conftest2.$ac_objext
- then
- # The compiler can only warn and ignore the option if not recognized
- # So say no if there are warnings
- $echo "X$_lt_compiler_boilerplate" | $Xsed -e '/^$/d' > out/conftest.exp
- $SED '/^$/d; /^ *+/d' out/conftest.err >out/conftest.er2
- if test ! -s out/conftest.er2 || diff out/conftest.exp out/conftest.er2 >/dev/null; then
- _LT_AC_TAGVAR(lt_cv_prog_compiler_c_o, $1)=yes
- fi
- fi
- chmod u+w . 2>&AS_MESSAGE_LOG_FD
- $rm conftest*
- # SGI C++ compiler will create directory out/ii_files/ for
- # template instantiation
- test -d out/ii_files && $rm out/ii_files/* && rmdir out/ii_files
- $rm out/* && rmdir out
- cd ..
- rmdir conftest
- $rm conftest*
-])
-])# AC_LIBTOOL_PROG_CC_C_O
-
-
-# AC_LIBTOOL_SYS_HARD_LINK_LOCKS([TAGNAME])
-# -----------------------------------------
-# Check to see if we can do hard links to lock some files if needed
-AC_DEFUN([AC_LIBTOOL_SYS_HARD_LINK_LOCKS],
-[AC_REQUIRE([_LT_AC_LOCK])dnl
-
-hard_links="nottested"
-if test "$_LT_AC_TAGVAR(lt_cv_prog_compiler_c_o, $1)" = no && test "$need_locks" != no; then
- # do not overwrite the value of need_locks provided by the user
- AC_MSG_CHECKING([if we can lock with hard links])
- hard_links=yes
- $rm conftest*
- ln conftest.a conftest.b 2>/dev/null && hard_links=no
- touch conftest.a
- ln conftest.a conftest.b 2>&5 || hard_links=no
- ln conftest.a conftest.b 2>/dev/null && hard_links=no
- AC_MSG_RESULT([$hard_links])
- if test "$hard_links" = no; then
- AC_MSG_WARN([`$CC' does not support `-c -o', so `make -j' may be unsafe])
- need_locks=warn
- fi
-else
- need_locks=no
-fi
-])# AC_LIBTOOL_SYS_HARD_LINK_LOCKS
-
-
-# AC_LIBTOOL_OBJDIR
-# -----------------
-AC_DEFUN([AC_LIBTOOL_OBJDIR],
-[AC_CACHE_CHECK([for objdir], [lt_cv_objdir],
-[rm -f .libs 2>/dev/null
-mkdir .libs 2>/dev/null
-if test -d .libs; then
- lt_cv_objdir=.libs
-else
- # MS-DOS does not allow filenames that begin with a dot.
- lt_cv_objdir=_libs
-fi
-rmdir .libs 2>/dev/null])
-objdir=$lt_cv_objdir
-])# AC_LIBTOOL_OBJDIR
-
-
-# AC_LIBTOOL_PROG_LD_HARDCODE_LIBPATH([TAGNAME])
-# ----------------------------------------------
-# Check hardcoding attributes.
-AC_DEFUN([AC_LIBTOOL_PROG_LD_HARDCODE_LIBPATH],
-[AC_MSG_CHECKING([how to hardcode library paths into programs])
-_LT_AC_TAGVAR(hardcode_action, $1)=
-if test -n "$_LT_AC_TAGVAR(hardcode_libdir_flag_spec, $1)" || \
- test -n "$_LT_AC_TAGVAR(runpath_var, $1)" || \
- test "X$_LT_AC_TAGVAR(hardcode_automatic, $1)" = "Xyes" ; then
-
- # We can hardcode non-existant directories.
- if test "$_LT_AC_TAGVAR(hardcode_direct, $1)" != no &&
- # If the only mechanism to avoid hardcoding is shlibpath_var, we
- # have to relink, otherwise we might link with an installed library
- # when we should be linking with a yet-to-be-installed one
- ## test "$_LT_AC_TAGVAR(hardcode_shlibpath_var, $1)" != no &&
- test "$_LT_AC_TAGVAR(hardcode_minus_L, $1)" != no; then
- # Linking always hardcodes the temporary library directory.
- _LT_AC_TAGVAR(hardcode_action, $1)=relink
- else
- # We can link without hardcoding, and we can hardcode nonexisting dirs.
- _LT_AC_TAGVAR(hardcode_action, $1)=immediate
- fi
-else
- # We cannot hardcode anything, or else we can only hardcode existing
- # directories.
- _LT_AC_TAGVAR(hardcode_action, $1)=unsupported
-fi
-AC_MSG_RESULT([$_LT_AC_TAGVAR(hardcode_action, $1)])
-
-if test "$_LT_AC_TAGVAR(hardcode_action, $1)" = relink; then
- # Fast installation is not supported
- enable_fast_install=no
-elif test "$shlibpath_overrides_runpath" = yes ||
- test "$enable_shared" = no; then
- # Fast installation is not necessary
- enable_fast_install=needless
-fi
-])# AC_LIBTOOL_PROG_LD_HARDCODE_LIBPATH
-
-
-# AC_LIBTOOL_SYS_LIB_STRIP
-# ------------------------
-AC_DEFUN([AC_LIBTOOL_SYS_LIB_STRIP],
-[striplib=
-old_striplib=
-AC_MSG_CHECKING([whether stripping libraries is possible])
-if test -n "$STRIP" && $STRIP -V 2>&1 | grep "GNU strip" >/dev/null; then
- test -z "$old_striplib" && old_striplib="$STRIP --strip-debug"
- test -z "$striplib" && striplib="$STRIP --strip-unneeded"
- AC_MSG_RESULT([yes])
-else
-# FIXME - insert some real tests, host_os isn't really good enough
- case $host_os in
- darwin*)
- if test -n "$STRIP" ; then
- striplib="$STRIP -x"
- old_striplib="$STRIP -S"
- AC_MSG_RESULT([yes])
- else
- AC_MSG_RESULT([no])
-fi
- ;;
- *)
- AC_MSG_RESULT([no])
- ;;
- esac
-fi
-])# AC_LIBTOOL_SYS_LIB_STRIP
-
-
-# AC_LIBTOOL_SYS_DYNAMIC_LINKER
-# -----------------------------
-# PORTME Fill in your ld.so characteristics
-AC_DEFUN([AC_LIBTOOL_SYS_DYNAMIC_LINKER],
-[AC_REQUIRE([LT_AC_PROG_SED])dnl
-AC_MSG_CHECKING([dynamic linker characteristics])
-library_names_spec=
-libname_spec='lib$name'
-soname_spec=
-shrext_cmds=".so"
-postinstall_cmds=
-postuninstall_cmds=
-finish_cmds=
-finish_eval=
-shlibpath_var=
-shlibpath_overrides_runpath=unknown
-version_type=none
-dynamic_linker="$host_os ld.so"
-sys_lib_dlsearch_path_spec="/lib /usr/lib"
-m4_if($1,[],[
-if test "$GCC" = yes; then
- case $host_os in
- darwin*) lt_awk_arg="/^libraries:/,/LR/" ;;
- *) lt_awk_arg="/^libraries:/" ;;
- esac
- lt_search_path_spec=`$CC -print-search-dirs | awk $lt_awk_arg | $SED -e "s/^libraries://" -e "s,=/,/,g"`
- if echo "$lt_search_path_spec" | grep ';' >/dev/null ; then
- # if the path contains ";" then we assume it to be the separator
- # otherwise default to the standard path separator (i.e. ":") - it is
- # assumed that no part of a normal pathname contains ";" but that should
- # okay in the real world where ";" in dirpaths is itself problematic.
- lt_search_path_spec=`echo "$lt_search_path_spec" | $SED -e 's/;/ /g'`
- else
- lt_search_path_spec=`echo "$lt_search_path_spec" | $SED -e "s/$PATH_SEPARATOR/ /g"`
- fi
- # Ok, now we have the path, separated by spaces, we can step through it
- # and add multilib dir if necessary.
- lt_tmp_lt_search_path_spec=
- lt_multi_os_dir=`$CC $CPPFLAGS $CFLAGS $LDFLAGS -print-multi-os-directory 2>/dev/null`
- for lt_sys_path in $lt_search_path_spec; do
- if test -d "$lt_sys_path/$lt_multi_os_dir"; then
- lt_tmp_lt_search_path_spec="$lt_tmp_lt_search_path_spec $lt_sys_path/$lt_multi_os_dir"
- else
- test -d "$lt_sys_path" && \
- lt_tmp_lt_search_path_spec="$lt_tmp_lt_search_path_spec $lt_sys_path"
- fi
- done
- lt_search_path_spec=`echo $lt_tmp_lt_search_path_spec | awk '
-BEGIN {RS=" "; FS="/|\n";} {
- lt_foo="";
- lt_count=0;
- for (lt_i = NF; lt_i > 0; lt_i--) {
- if ($lt_i != "" && $lt_i != ".") {
- if ($lt_i == "..") {
- lt_count++;
- } else {
- if (lt_count == 0) {
- lt_foo="/" $lt_i lt_foo;
- } else {
- lt_count--;
- }
- }
- }
- }
- if (lt_foo != "") { lt_freq[[lt_foo]]++; }
- if (lt_freq[[lt_foo]] == 1) { print lt_foo; }
-}'`
- sys_lib_search_path_spec=`echo $lt_search_path_spec`
-else
- sys_lib_search_path_spec="/lib /usr/lib /usr/local/lib"
-fi])
-need_lib_prefix=unknown
-hardcode_into_libs=no
-
-# when you set need_version to no, make sure it does not cause -set_version
-# flags to be left without arguments
-need_version=unknown
-
-case $host_os in
-aix3*)
- version_type=linux
- library_names_spec='${libname}${release}${shared_ext}$versuffix $libname.a'
- shlibpath_var=LIBPATH
-
- # AIX 3 has no versioning support, so we append a major version to the name.
- soname_spec='${libname}${release}${shared_ext}$major'
- ;;
-
-aix[[4-9]]*)
- version_type=linux
- need_lib_prefix=no
- need_version=no
- hardcode_into_libs=yes
- if test "$host_cpu" = ia64; then
- # AIX 5 supports IA64
- library_names_spec='${libname}${release}${shared_ext}$major ${libname}${release}${shared_ext}$versuffix $libname${shared_ext}'
- shlibpath_var=LD_LIBRARY_PATH
- else
- # With GCC up to 2.95.x, collect2 would create an import file
- # for dependence libraries. The import file would start with
- # the line `#! .'. This would cause the generated library to
- # depend on `.', always an invalid library. This was fixed in
- # development snapshots of GCC prior to 3.0.
- case $host_os in
- aix4 | aix4.[[01]] | aix4.[[01]].*)
- if { echo '#if __GNUC__ > 2 || (__GNUC__ == 2 && __GNUC_MINOR__ >= 97)'
- echo ' yes '
- echo '#endif'; } | ${CC} -E - | grep yes > /dev/null; then
- :
- else
- can_build_shared=no
- fi
- ;;
- esac
- # AIX (on Power*) has no versioning support, so currently we can not hardcode correct
- # soname into executable. Probably we can add versioning support to
- # collect2, so additional links can be useful in future.
- if test "$aix_use_runtimelinking" = yes; then
- # If using run time linking (on AIX 4.2 or later) use lib<name>.so
- # instead of lib<name>.a to let people know that these are not
- # typical AIX shared libraries.
- library_names_spec='${libname}${release}${shared_ext}$versuffix ${libname}${release}${shared_ext}$major $libname${shared_ext}'
- else
- # We preserve .a as extension for shared libraries through AIX4.2
- # and later when we are not doing run time linking.
- library_names_spec='${libname}${release}.a $libname.a'
- soname_spec='${libname}${release}${shared_ext}$major'
- fi
- shlibpath_var=LIBPATH
- fi
- ;;
-
-amigaos*)
- library_names_spec='$libname.ixlibrary $libname.a'
- # Create ${libname}_ixlibrary.a entries in /sys/libs.
- finish_eval='for lib in `ls $libdir/*.ixlibrary 2>/dev/null`; do libname=`$echo "X$lib" | $Xsed -e '\''s%^.*/\([[^/]]*\)\.ixlibrary$%\1%'\''`; test $rm /sys/libs/${libname}_ixlibrary.a; $show "cd /sys/libs && $LN_S $lib ${libname}_ixlibrary.a"; cd /sys/libs && $LN_S $lib ${libname}_ixlibrary.a || exit 1; done'
- ;;
-
-beos*)
- library_names_spec='${libname}${shared_ext}'
- dynamic_linker="$host_os ld.so"
- shlibpath_var=LIBRARY_PATH
- ;;
-
-bsdi[[45]]*)
- version_type=linux
- need_version=no
- library_names_spec='${libname}${release}${shared_ext}$versuffix ${libname}${release}${shared_ext}$major $libname${shared_ext}'
- soname_spec='${libname}${release}${shared_ext}$major'
- finish_cmds='PATH="\$PATH:/sbin" ldconfig $libdir'
- shlibpath_var=LD_LIBRARY_PATH
- sys_lib_search_path_spec="/shlib /usr/lib /usr/X11/lib /usr/contrib/lib /lib /usr/local/lib"
- sys_lib_dlsearch_path_spec="/shlib /usr/lib /usr/local/lib"
- # the default ld.so.conf also contains /usr/contrib/lib and
- # /usr/X11R6/lib (/usr/X11 is a link to /usr/X11R6), but let us allow
- # libtool to hard-code these into programs
- ;;
-
-cygwin* | mingw* | pw32*)
- version_type=windows
- shrext_cmds=".dll"
- need_version=no
- need_lib_prefix=no
-
- case $GCC,$host_os in
- yes,cygwin* | yes,mingw* | yes,pw32*)
- library_names_spec='$libname.dll.a'
- # DLL is installed to $(libdir)/../bin by postinstall_cmds
- postinstall_cmds='base_file=`basename \${file}`~
- dlpath=`$SHELL 2>&1 -c '\''. $dir/'\''\${base_file}'\''i;echo \$dlname'\''`~
- dldir=$destdir/`dirname \$dlpath`~
- test -d \$dldir || mkdir -p \$dldir~
- $install_prog $dir/$dlname \$dldir/$dlname~
- chmod a+x \$dldir/$dlname'
- postuninstall_cmds='dldll=`$SHELL 2>&1 -c '\''. $file; echo \$dlname'\''`~
- dlpath=$dir/\$dldll~
- $rm \$dlpath'
- shlibpath_overrides_runpath=yes
-
- case $host_os in
- cygwin*)
- # Cygwin DLLs use 'cyg' prefix rather than 'lib'
- soname_spec='`echo ${libname} | sed -e 's/^lib/cyg/'``echo ${release} | $SED -e 's/[[.]]/-/g'`${versuffix}${shared_ext}'
- sys_lib_search_path_spec="/usr/lib /lib/w32api /lib /usr/local/lib"
- ;;
- mingw*)
- # MinGW DLLs use traditional 'lib' prefix
- soname_spec='${libname}`echo ${release} | $SED -e 's/[[.]]/-/g'`${versuffix}${shared_ext}'
- sys_lib_search_path_spec=`$CC -print-search-dirs | grep "^libraries:" | $SED -e "s/^libraries://" -e "s,=/,/,g"`
- if echo "$sys_lib_search_path_spec" | [grep ';[c-zC-Z]:/' >/dev/null]; then
- # It is most probably a Windows format PATH printed by
- # mingw gcc, but we are running on Cygwin. Gcc prints its search
- # path with ; separators, and with drive letters. We can handle the
- # drive letters (cygwin fileutils understands them), so leave them,
- # especially as we might pass files found there to a mingw objdump,
- # which wouldn't understand a cygwinified path. Ahh.
- sys_lib_search_path_spec=`echo "$sys_lib_search_path_spec" | $SED -e 's/;/ /g'`
- else
- sys_lib_search_path_spec=`echo "$sys_lib_search_path_spec" | $SED -e "s/$PATH_SEPARATOR/ /g"`
- fi
- ;;
- pw32*)
- # pw32 DLLs use 'pw' prefix rather than 'lib'
- library_names_spec='`echo ${libname} | sed -e 's/^lib/pw/'``echo ${release} | $SED -e 's/[[.]]/-/g'`${versuffix}${shared_ext}'
- ;;
- esac
- ;;
-
- *)
- library_names_spec='${libname}`echo ${release} | $SED -e 's/[[.]]/-/g'`${versuffix}${shared_ext} $libname.lib'
- ;;
- esac
- dynamic_linker='Win32 ld.exe'
- # FIXME: first we should search . and the directory the executable is in
- shlibpath_var=PATH
- ;;
-
-darwin* | rhapsody*)
- dynamic_linker="$host_os dyld"
- version_type=darwin
- need_lib_prefix=no
- need_version=no
- library_names_spec='${libname}${release}${versuffix}$shared_ext ${libname}${release}${major}$shared_ext ${libname}$shared_ext'
- soname_spec='${libname}${release}${major}$shared_ext'
- shlibpath_overrides_runpath=yes
- shlibpath_var=DYLD_LIBRARY_PATH
- shrext_cmds='`test .$module = .yes && echo .so || echo .dylib`'
- m4_if([$1], [],[
- sys_lib_search_path_spec="$sys_lib_search_path_spec /usr/local/lib"])
- sys_lib_dlsearch_path_spec='/usr/local/lib /lib /usr/lib'
- ;;
-
-dgux*)
- version_type=linux
- need_lib_prefix=no
- need_version=no
- library_names_spec='${libname}${release}${shared_ext}$versuffix ${libname}${release}${shared_ext}$major $libname$shared_ext'
- soname_spec='${libname}${release}${shared_ext}$major'
- shlibpath_var=LD_LIBRARY_PATH
- ;;
-
-freebsd1*)
- dynamic_linker=no
- ;;
-
-freebsd* | dragonfly*)
- # DragonFly does not have aout. When/if they implement a new
- # versioning mechanism, adjust this.
- if test -x /usr/bin/objformat; then
- objformat=`/usr/bin/objformat`
- else
- case $host_os in
- freebsd[[123]]*) objformat=aout ;;
- *) objformat=elf ;;
- esac
- fi
- version_type=freebsd-$objformat
- case $version_type in
- freebsd-elf*)
- library_names_spec='${libname}${release}${shared_ext}$versuffix ${libname}${release}${shared_ext} $libname${shared_ext}'
- need_version=no
- need_lib_prefix=no
- ;;
- freebsd-*)
- library_names_spec='${libname}${release}${shared_ext}$versuffix $libname${shared_ext}$versuffix'
- need_version=yes
- ;;
- esac
- shlibpath_var=LD_LIBRARY_PATH
- case $host_os in
- freebsd2*)
- shlibpath_overrides_runpath=yes
- ;;
- freebsd3.[[01]]* | freebsdelf3.[[01]]*)
- shlibpath_overrides_runpath=yes
- hardcode_into_libs=yes
- ;;
- freebsd3.[[2-9]]* | freebsdelf3.[[2-9]]* | \
- freebsd4.[[0-5]] | freebsdelf4.[[0-5]] | freebsd4.1.1 | freebsdelf4.1.1)
- shlibpath_overrides_runpath=no
- hardcode_into_libs=yes
- ;;
- *) # from 4.6 on, and DragonFly
- shlibpath_overrides_runpath=yes
- hardcode_into_libs=yes
- ;;
- esac
- ;;
-
-gnu*)
- version_type=linux
- need_lib_prefix=no
- need_version=no
- library_names_spec='${libname}${release}${shared_ext}$versuffix ${libname}${release}${shared_ext}${major} ${libname}${shared_ext}'
- soname_spec='${libname}${release}${shared_ext}$major'
- shlibpath_var=LD_LIBRARY_PATH
- hardcode_into_libs=yes
- ;;
-
-hpux9* | hpux10* | hpux11*)
- # Give a soname corresponding to the major version so that dld.sl refuses to
- # link against other versions.
- version_type=sunos
- need_lib_prefix=no
- need_version=no
- case $host_cpu in
- ia64*)
- shrext_cmds='.so'
- hardcode_into_libs=yes
- dynamic_linker="$host_os dld.so"
- shlibpath_var=LD_LIBRARY_PATH
- shlibpath_overrides_runpath=yes # Unless +noenvvar is specified.
- library_names_spec='${libname}${release}${shared_ext}$versuffix ${libname}${release}${shared_ext}$major $libname${shared_ext}'
- soname_spec='${libname}${release}${shared_ext}$major'
- if test "X$HPUX_IA64_MODE" = X32; then
- sys_lib_search_path_spec="/usr/lib/hpux32 /usr/local/lib/hpux32 /usr/local/lib"
- else
- sys_lib_search_path_spec="/usr/lib/hpux64 /usr/local/lib/hpux64"
- fi
- sys_lib_dlsearch_path_spec=$sys_lib_search_path_spec
- ;;
- hppa*64*)
- shrext_cmds='.sl'
- hardcode_into_libs=yes
- dynamic_linker="$host_os dld.sl"
- shlibpath_var=LD_LIBRARY_PATH # How should we handle SHLIB_PATH
- shlibpath_overrides_runpath=yes # Unless +noenvvar is specified.
- library_names_spec='${libname}${release}${shared_ext}$versuffix ${libname}${release}${shared_ext}$major $libname${shared_ext}'
- soname_spec='${libname}${release}${shared_ext}$major'
- sys_lib_search_path_spec="/usr/lib/pa20_64 /usr/ccs/lib/pa20_64"
- sys_lib_dlsearch_path_spec=$sys_lib_search_path_spec
- ;;
- *)
- shrext_cmds='.sl'
- dynamic_linker="$host_os dld.sl"
- shlibpath_var=SHLIB_PATH
- shlibpath_overrides_runpath=no # +s is required to enable SHLIB_PATH
- library_names_spec='${libname}${release}${shared_ext}$versuffix ${libname}${release}${shared_ext}$major $libname${shared_ext}'
- soname_spec='${libname}${release}${shared_ext}$major'
- ;;
- esac
- # HP-UX runs *really* slowly unless shared libraries are mode 555.
- postinstall_cmds='chmod 555 $lib'
- ;;
-
-interix[[3-9]]*)
- version_type=linux
- need_lib_prefix=no
- need_version=no
- library_names_spec='${libname}${release}${shared_ext}$versuffix ${libname}${release}${shared_ext}$major ${libname}${shared_ext}'
- soname_spec='${libname}${release}${shared_ext}$major'
- dynamic_linker='Interix 3.x ld.so.1 (PE, like ELF)'
- shlibpath_var=LD_LIBRARY_PATH
- shlibpath_overrides_runpath=no
- hardcode_into_libs=yes
- ;;
-
-irix5* | irix6* | nonstopux*)
- case $host_os in
- nonstopux*) version_type=nonstopux ;;
- *)
- if test "$lt_cv_prog_gnu_ld" = yes; then
- version_type=linux
- else
- version_type=irix
- fi ;;
- esac
- need_lib_prefix=no
- need_version=no
- soname_spec='${libname}${release}${shared_ext}$major'
- library_names_spec='${libname}${release}${shared_ext}$versuffix ${libname}${release}${shared_ext}$major ${libname}${release}${shared_ext} $libname${shared_ext}'
- case $host_os in
- irix5* | nonstopux*)
- libsuff= shlibsuff=
- ;;
- *)
- case $LD in # libtool.m4 will add one of these switches to LD
- *-32|*"-32 "|*-melf32bsmip|*"-melf32bsmip ")
- libsuff= shlibsuff= libmagic=32-bit;;
- *-n32|*"-n32 "|*-melf32bmipn32|*"-melf32bmipn32 ")
- libsuff=32 shlibsuff=N32 libmagic=N32;;
- *-64|*"-64 "|*-melf64bmip|*"-melf64bmip ")
- libsuff=64 shlibsuff=64 libmagic=64-bit;;
- *) libsuff= shlibsuff= libmagic=never-match;;
- esac
- ;;
- esac
- shlibpath_var=LD_LIBRARY${shlibsuff}_PATH
- shlibpath_overrides_runpath=no
- sys_lib_search_path_spec="/usr/lib${libsuff} /lib${libsuff} /usr/local/lib${libsuff}"
- sys_lib_dlsearch_path_spec="/usr/lib${libsuff} /lib${libsuff}"
- hardcode_into_libs=yes
- ;;
-
-# No shared lib support for Linux oldld, aout, or coff.
-linux*oldld* | linux*aout* | linux*coff*)
- dynamic_linker=no
- ;;
-
-# This must be Linux ELF.
-linux* | k*bsd*-gnu)
- version_type=linux
- need_lib_prefix=no
- need_version=no
- library_names_spec='${libname}${release}${shared_ext}$versuffix ${libname}${release}${shared_ext}$major $libname${shared_ext}'
- soname_spec='${libname}${release}${shared_ext}$major'
- finish_cmds='PATH="\$PATH:/sbin" ldconfig -n $libdir'
- shlibpath_var=LD_LIBRARY_PATH
- shlibpath_overrides_runpath=no
- # This implies no fast_install, which is unacceptable.
- # Some rework will be needed to allow for fast_install
- # before this can be enabled.
- hardcode_into_libs=yes
-
- # Append ld.so.conf contents to the search path
- if test -f /etc/ld.so.conf; then
- lt_ld_extra=`awk '/^include / { system(sprintf("cd /etc; cat %s 2>/dev/null", \[$]2)); skip = 1; } { if (!skip) print \[$]0; skip = 0; }' < /etc/ld.so.conf | $SED -e 's/#.*//;/^[ ]*hwcap[ ]/d;s/[:, ]/ /g;s/=[^=]*$//;s/=[^= ]* / /g;/^$/d' | tr '\n' ' '`
- sys_lib_dlsearch_path_spec="/lib /usr/lib $lt_ld_extra"
- fi
-
- # We used to test for /lib/ld.so.1 and disable shared libraries on
- # powerpc, because MkLinux only supported shared libraries with the
- # GNU dynamic linker. Since this was broken with cross compilers,
- # most powerpc-linux boxes support dynamic linking these days and
- # people can always --disable-shared, the test was removed, and we
- # assume the GNU/Linux dynamic linker is in use.
- dynamic_linker='GNU/Linux ld.so'
- ;;
-
-netbsd*)
- version_type=sunos
- need_lib_prefix=no
- need_version=no
- if echo __ELF__ | $CC -E - | grep __ELF__ >/dev/null; then
- library_names_spec='${libname}${release}${shared_ext}$versuffix ${libname}${shared_ext}$versuffix'
- finish_cmds='PATH="\$PATH:/sbin" ldconfig -m $libdir'
- dynamic_linker='NetBSD (a.out) ld.so'
- else
- library_names_spec='${libname}${release}${shared_ext}$versuffix ${libname}${release}${shared_ext}$major ${libname}${shared_ext}'
- soname_spec='${libname}${release}${shared_ext}$major'
- dynamic_linker='NetBSD ld.elf_so'
- fi
- shlibpath_var=LD_LIBRARY_PATH
- shlibpath_overrides_runpath=yes
- hardcode_into_libs=yes
- ;;
-
-newsos6)
- version_type=linux
- library_names_spec='${libname}${release}${shared_ext}$versuffix ${libname}${release}${shared_ext}$major $libname${shared_ext}'
- shlibpath_var=LD_LIBRARY_PATH
- shlibpath_overrides_runpath=yes
- ;;
-
-nto-qnx*)
- version_type=linux
- need_lib_prefix=no
- need_version=no
- library_names_spec='${libname}${release}${shared_ext}$versuffix ${libname}${release}${shared_ext}$major $libname${shared_ext}'
- soname_spec='${libname}${release}${shared_ext}$major'
- shlibpath_var=LD_LIBRARY_PATH
- shlibpath_overrides_runpath=yes
- ;;
-
-openbsd*)
- version_type=sunos
- sys_lib_dlsearch_path_spec="/usr/lib"
- need_lib_prefix=no
- # Some older versions of OpenBSD (3.3 at least) *do* need versioned libs.
- case $host_os in
- openbsd3.3 | openbsd3.3.*) need_version=yes ;;
- *) need_version=no ;;
- esac
- library_names_spec='${libname}${release}${shared_ext}$versuffix ${libname}${shared_ext}$versuffix'
- finish_cmds='PATH="\$PATH:/sbin" ldconfig -m $libdir'
- shlibpath_var=LD_LIBRARY_PATH
- if test -z "`echo __ELF__ | $CC -E - | grep __ELF__`" || test "$host_os-$host_cpu" = "openbsd2.8-powerpc"; then
- case $host_os in
- openbsd2.[[89]] | openbsd2.[[89]].*)
- shlibpath_overrides_runpath=no
- ;;
- *)
- shlibpath_overrides_runpath=yes
- ;;
- esac
- else
- shlibpath_overrides_runpath=yes
- fi
- ;;
-
-os2*)
- libname_spec='$name'
- shrext_cmds=".dll"
- need_lib_prefix=no
- library_names_spec='$libname${shared_ext} $libname.a'
- dynamic_linker='OS/2 ld.exe'
- shlibpath_var=LIBPATH
- ;;
-
-osf3* | osf4* | osf5*)
- version_type=osf
- need_lib_prefix=no
- need_version=no
- soname_spec='${libname}${release}${shared_ext}$major'
- library_names_spec='${libname}${release}${shared_ext}$versuffix ${libname}${release}${shared_ext}$major $libname${shared_ext}'
- shlibpath_var=LD_LIBRARY_PATH
- sys_lib_search_path_spec="/usr/shlib /usr/ccs/lib /usr/lib/cmplrs/cc /usr/lib /usr/local/lib /var/shlib"
- sys_lib_dlsearch_path_spec="$sys_lib_search_path_spec"
- ;;
-
-rdos*)
- dynamic_linker=no
- ;;
-
-solaris*)
- version_type=linux
- need_lib_prefix=no
- need_version=no
- library_names_spec='${libname}${release}${shared_ext}$versuffix ${libname}${release}${shared_ext}$major $libname${shared_ext}'
- soname_spec='${libname}${release}${shared_ext}$major'
- shlibpath_var=LD_LIBRARY_PATH
- shlibpath_overrides_runpath=yes
- hardcode_into_libs=yes
- # ldd complains unless libraries are executable
- postinstall_cmds='chmod +x $lib'
- ;;
-
-sunos4*)
- version_type=sunos
- library_names_spec='${libname}${release}${shared_ext}$versuffix ${libname}${shared_ext}$versuffix'
- finish_cmds='PATH="\$PATH:/usr/etc" ldconfig $libdir'
- shlibpath_var=LD_LIBRARY_PATH
- shlibpath_overrides_runpath=yes
- if test "$with_gnu_ld" = yes; then
- need_lib_prefix=no
- fi
- need_version=yes
- ;;
-
-sysv4 | sysv4.3*)
- version_type=linux
- library_names_spec='${libname}${release}${shared_ext}$versuffix ${libname}${release}${shared_ext}$major $libname${shared_ext}'
- soname_spec='${libname}${release}${shared_ext}$major'
- shlibpath_var=LD_LIBRARY_PATH
- case $host_vendor in
- sni)
- shlibpath_overrides_runpath=no
- need_lib_prefix=no
- export_dynamic_flag_spec='${wl}-Blargedynsym'
- runpath_var=LD_RUN_PATH
- ;;
- siemens)
- need_lib_prefix=no
- ;;
- motorola)
- need_lib_prefix=no
- need_version=no
- shlibpath_overrides_runpath=no
- sys_lib_search_path_spec='/lib /usr/lib /usr/ccs/lib'
- ;;
- esac
- ;;
-
-sysv4*MP*)
- if test -d /usr/nec ;then
- version_type=linux
- library_names_spec='$libname${shared_ext}.$versuffix $libname${shared_ext}.$major $libname${shared_ext}'
- soname_spec='$libname${shared_ext}.$major'
- shlibpath_var=LD_LIBRARY_PATH
- fi
- ;;
-
-sysv5* | sco3.2v5* | sco5v6* | unixware* | OpenUNIX* | sysv4*uw2*)
- version_type=freebsd-elf
- need_lib_prefix=no
- need_version=no
- library_names_spec='${libname}${release}${shared_ext}$versuffix ${libname}${release}${shared_ext} $libname${shared_ext}'
- soname_spec='${libname}${release}${shared_ext}$major'
- shlibpath_var=LD_LIBRARY_PATH
- hardcode_into_libs=yes
- if test "$with_gnu_ld" = yes; then
- sys_lib_search_path_spec='/usr/local/lib /usr/gnu/lib /usr/ccs/lib /usr/lib /lib'
- shlibpath_overrides_runpath=no
- else
- sys_lib_search_path_spec='/usr/ccs/lib /usr/lib'
- shlibpath_overrides_runpath=yes
- case $host_os in
- sco3.2v5*)
- sys_lib_search_path_spec="$sys_lib_search_path_spec /lib"
- ;;
- esac
- fi
- sys_lib_dlsearch_path_spec='/usr/lib'
- ;;
-
-uts4*)
- version_type=linux
- library_names_spec='${libname}${release}${shared_ext}$versuffix ${libname}${release}${shared_ext}$major $libname${shared_ext}'
- soname_spec='${libname}${release}${shared_ext}$major'
- shlibpath_var=LD_LIBRARY_PATH
- ;;
-
-*)
- dynamic_linker=no
- ;;
-esac
-AC_MSG_RESULT([$dynamic_linker])
-test "$dynamic_linker" = no && can_build_shared=no
-
-AC_CACHE_VAL([lt_cv_sys_lib_search_path_spec],
-[lt_cv_sys_lib_search_path_spec="$sys_lib_search_path_spec"])
-sys_lib_search_path_spec="$lt_cv_sys_lib_search_path_spec"
-AC_CACHE_VAL([lt_cv_sys_lib_dlsearch_path_spec],
-[lt_cv_sys_lib_dlsearch_path_spec="$sys_lib_dlsearch_path_spec"])
-sys_lib_dlsearch_path_spec="$lt_cv_sys_lib_dlsearch_path_spec"
-
-variables_saved_for_relink="PATH $shlibpath_var $runpath_var"
-if test "$GCC" = yes; then
- variables_saved_for_relink="$variables_saved_for_relink GCC_EXEC_PREFIX COMPILER_PATH LIBRARY_PATH"
-fi
-])# AC_LIBTOOL_SYS_DYNAMIC_LINKER
-
-
-# _LT_AC_TAGCONFIG
-# ----------------
-AC_DEFUN([_LT_AC_TAGCONFIG],
-[AC_REQUIRE([LT_AC_PROG_SED])dnl
-AC_ARG_WITH([tags],
- [AC_HELP_STRING([--with-tags@<:@=TAGS@:>@],
- [include additional configurations @<:@automatic@:>@])],
- [tagnames="$withval"])
-
-if test -f "$ltmain" && test -n "$tagnames"; then
- if test ! -f "${ofile}"; then
- AC_MSG_WARN([output file `$ofile' does not exist])
- fi
-
- if test -z "$LTCC"; then
- eval "`$SHELL ${ofile} --config | grep '^LTCC='`"
- if test -z "$LTCC"; then
- AC_MSG_WARN([output file `$ofile' does not look like a libtool script])
- else
- AC_MSG_WARN([using `LTCC=$LTCC', extracted from `$ofile'])
- fi
- fi
- if test -z "$LTCFLAGS"; then
- eval "`$SHELL ${ofile} --config | grep '^LTCFLAGS='`"
- fi
-
- # Extract list of available tagged configurations in $ofile.
- # Note that this assumes the entire list is on one line.
- available_tags=`grep "^available_tags=" "${ofile}" | $SED -e 's/available_tags=\(.*$\)/\1/' -e 's/\"//g'`
-
- lt_save_ifs="$IFS"; IFS="${IFS}$PATH_SEPARATOR,"
- for tagname in $tagnames; do
- IFS="$lt_save_ifs"
- # Check whether tagname contains only valid characters
- case `$echo "X$tagname" | $Xsed -e 's:[[-_ABCDEFGHIJKLMNOPQRSTUVWXYZabcdefghijklmnopqrstuvwxyz1234567890,/]]::g'` in
- "") ;;
- *) AC_MSG_ERROR([invalid tag name: $tagname])
- ;;
- esac
-
- if grep "^# ### BEGIN LIBTOOL TAG CONFIG: $tagname$" < "${ofile}" > /dev/null
- then
- AC_MSG_ERROR([tag name \"$tagname\" already exists])
- fi
-
- # Update the list of available tags.
- if test -n "$tagname"; then
- echo appending configuration tag \"$tagname\" to $ofile
-
- case $tagname in
- CXX)
- if test -n "$CXX" && ( test "X$CXX" != "Xno" &&
- ( (test "X$CXX" = "Xg++" && `g++ -v >/dev/null 2>&1` ) ||
- (test "X$CXX" != "Xg++"))) ; then
- AC_LIBTOOL_LANG_CXX_CONFIG
- else
- tagname=""
- fi
- ;;
-
- F77)
- if test -n "$F77" && test "X$F77" != "Xno"; then
- AC_LIBTOOL_LANG_F77_CONFIG
- else
- tagname=""
- fi
- ;;
-
- GCJ)
- if test -n "$GCJ" && test "X$GCJ" != "Xno"; then
- AC_LIBTOOL_LANG_GCJ_CONFIG
- else
- tagname=""
- fi
- ;;
-
- RC)
- AC_LIBTOOL_LANG_RC_CONFIG
- ;;
-
- *)
- AC_MSG_ERROR([Unsupported tag name: $tagname])
- ;;
- esac
-
- # Append the new tag name to the list of available tags.
- if test -n "$tagname" ; then
- available_tags="$available_tags $tagname"
- fi
- fi
- done
- IFS="$lt_save_ifs"
-
- # Now substitute the updated list of available tags.
- if eval "sed -e 's/^available_tags=.*\$/available_tags=\"$available_tags\"/' \"$ofile\" > \"${ofile}T\""; then
- mv "${ofile}T" "$ofile"
- chmod +x "$ofile"
- else
- rm -f "${ofile}T"
- AC_MSG_ERROR([unable to update list of available tagged configurations.])
- fi
-fi
-])# _LT_AC_TAGCONFIG
-
-
-# AC_LIBTOOL_DLOPEN
-# -----------------
-# enable checks for dlopen support
-AC_DEFUN([AC_LIBTOOL_DLOPEN],
- [AC_BEFORE([$0],[AC_LIBTOOL_SETUP])
-])# AC_LIBTOOL_DLOPEN
-
-
-# AC_LIBTOOL_WIN32_DLL
-# --------------------
-# declare package support for building win32 DLLs
-AC_DEFUN([AC_LIBTOOL_WIN32_DLL],
-[AC_BEFORE([$0], [AC_LIBTOOL_SETUP])
-])# AC_LIBTOOL_WIN32_DLL
-
-
-# AC_ENABLE_SHARED([DEFAULT])
-# ---------------------------
-# implement the --enable-shared flag
-# DEFAULT is either `yes' or `no'. If omitted, it defaults to `yes'.
-AC_DEFUN([AC_ENABLE_SHARED],
-[define([AC_ENABLE_SHARED_DEFAULT], ifelse($1, no, no, yes))dnl
-AC_ARG_ENABLE([shared],
- [AC_HELP_STRING([--enable-shared@<:@=PKGS@:>@],
- [build shared libraries @<:@default=]AC_ENABLE_SHARED_DEFAULT[@:>@])],
- [p=${PACKAGE-default}
- case $enableval in
- yes) enable_shared=yes ;;
- no) enable_shared=no ;;
- *)
- enable_shared=no
- # Look at the argument we got. We use all the common list separators.
- lt_save_ifs="$IFS"; IFS="${IFS}$PATH_SEPARATOR,"
- for pkg in $enableval; do
- IFS="$lt_save_ifs"
- if test "X$pkg" = "X$p"; then
- enable_shared=yes
- fi
- done
- IFS="$lt_save_ifs"
- ;;
- esac],
- [enable_shared=]AC_ENABLE_SHARED_DEFAULT)
-])# AC_ENABLE_SHARED
-
-
-# AC_DISABLE_SHARED
-# -----------------
-# set the default shared flag to --disable-shared
-AC_DEFUN([AC_DISABLE_SHARED],
-[AC_BEFORE([$0],[AC_LIBTOOL_SETUP])dnl
-AC_ENABLE_SHARED(no)
-])# AC_DISABLE_SHARED
-
-
-# AC_ENABLE_STATIC([DEFAULT])
-# ---------------------------
-# implement the --enable-static flag
-# DEFAULT is either `yes' or `no'. If omitted, it defaults to `yes'.
-AC_DEFUN([AC_ENABLE_STATIC],
-[define([AC_ENABLE_STATIC_DEFAULT], ifelse($1, no, no, yes))dnl
-AC_ARG_ENABLE([static],
- [AC_HELP_STRING([--enable-static@<:@=PKGS@:>@],
- [build static libraries @<:@default=]AC_ENABLE_STATIC_DEFAULT[@:>@])],
- [p=${PACKAGE-default}
- case $enableval in
- yes) enable_static=yes ;;
- no) enable_static=no ;;
- *)
- enable_static=no
- # Look at the argument we got. We use all the common list separators.
- lt_save_ifs="$IFS"; IFS="${IFS}$PATH_SEPARATOR,"
- for pkg in $enableval; do
- IFS="$lt_save_ifs"
- if test "X$pkg" = "X$p"; then
- enable_static=yes
- fi
- done
- IFS="$lt_save_ifs"
- ;;
- esac],
- [enable_static=]AC_ENABLE_STATIC_DEFAULT)
-])# AC_ENABLE_STATIC
-
-
-# AC_DISABLE_STATIC
-# -----------------
-# set the default static flag to --disable-static
-AC_DEFUN([AC_DISABLE_STATIC],
-[AC_BEFORE([$0],[AC_LIBTOOL_SETUP])dnl
-AC_ENABLE_STATIC(no)
-])# AC_DISABLE_STATIC
-
-
-# AC_ENABLE_FAST_INSTALL([DEFAULT])
-# ---------------------------------
-# implement the --enable-fast-install flag
-# DEFAULT is either `yes' or `no'. If omitted, it defaults to `yes'.
-AC_DEFUN([AC_ENABLE_FAST_INSTALL],
-[define([AC_ENABLE_FAST_INSTALL_DEFAULT], ifelse($1, no, no, yes))dnl
-AC_ARG_ENABLE([fast-install],
- [AC_HELP_STRING([--enable-fast-install@<:@=PKGS@:>@],
- [optimize for fast installation @<:@default=]AC_ENABLE_FAST_INSTALL_DEFAULT[@:>@])],
- [p=${PACKAGE-default}
- case $enableval in
- yes) enable_fast_install=yes ;;
- no) enable_fast_install=no ;;
- *)
- enable_fast_install=no
- # Look at the argument we got. We use all the common list separators.
- lt_save_ifs="$IFS"; IFS="${IFS}$PATH_SEPARATOR,"
- for pkg in $enableval; do
- IFS="$lt_save_ifs"
- if test "X$pkg" = "X$p"; then
- enable_fast_install=yes
- fi
- done
- IFS="$lt_save_ifs"
- ;;
- esac],
- [enable_fast_install=]AC_ENABLE_FAST_INSTALL_DEFAULT)
-])# AC_ENABLE_FAST_INSTALL
-
-
-# AC_DISABLE_FAST_INSTALL
-# -----------------------
-# set the default to --disable-fast-install
-AC_DEFUN([AC_DISABLE_FAST_INSTALL],
-[AC_BEFORE([$0],[AC_LIBTOOL_SETUP])dnl
-AC_ENABLE_FAST_INSTALL(no)
-])# AC_DISABLE_FAST_INSTALL
-
-
-# AC_LIBTOOL_PICMODE([MODE])
-# --------------------------
-# implement the --with-pic flag
-# MODE is either `yes' or `no'. If omitted, it defaults to `both'.
-AC_DEFUN([AC_LIBTOOL_PICMODE],
-[AC_BEFORE([$0],[AC_LIBTOOL_SETUP])dnl
-pic_mode=ifelse($#,1,$1,default)
-])# AC_LIBTOOL_PICMODE
-
-
-# AC_PROG_EGREP
-# -------------
-# This is predefined starting with Autoconf 2.54, so this conditional
-# definition can be removed once we require Autoconf 2.54 or later.
-m4_ifndef([AC_PROG_EGREP], [AC_DEFUN([AC_PROG_EGREP],
-[AC_CACHE_CHECK([for egrep], [ac_cv_prog_egrep],
- [if echo a | (grep -E '(a|b)') >/dev/null 2>&1
- then ac_cv_prog_egrep='grep -E'
- else ac_cv_prog_egrep='egrep'
- fi])
- EGREP=$ac_cv_prog_egrep
- AC_SUBST([EGREP])
-])])
-
-
-# AC_PATH_TOOL_PREFIX
-# -------------------
-# find a file program which can recognize shared library
-AC_DEFUN([AC_PATH_TOOL_PREFIX],
-[AC_REQUIRE([AC_PROG_EGREP])dnl
-AC_MSG_CHECKING([for $1])
-AC_CACHE_VAL(lt_cv_path_MAGIC_CMD,
-[case $MAGIC_CMD in
-[[\\/*] | ?:[\\/]*])
- lt_cv_path_MAGIC_CMD="$MAGIC_CMD" # Let the user override the test with a path.
- ;;
-*)
- lt_save_MAGIC_CMD="$MAGIC_CMD"
- lt_save_ifs="$IFS"; IFS=$PATH_SEPARATOR
-dnl $ac_dummy forces splitting on constant user-supplied paths.
-dnl POSIX.2 word splitting is done only on the output of word expansions,
-dnl not every word. This closes a longstanding sh security hole.
- ac_dummy="ifelse([$2], , $PATH, [$2])"
- for ac_dir in $ac_dummy; do
- IFS="$lt_save_ifs"
- test -z "$ac_dir" && ac_dir=.
- if test -f $ac_dir/$1; then
- lt_cv_path_MAGIC_CMD="$ac_dir/$1"
- if test -n "$file_magic_test_file"; then
- case $deplibs_check_method in
- "file_magic "*)
- file_magic_regex=`expr "$deplibs_check_method" : "file_magic \(.*\)"`
- MAGIC_CMD="$lt_cv_path_MAGIC_CMD"
- if eval $file_magic_cmd \$file_magic_test_file 2> /dev/null |
- $EGREP "$file_magic_regex" > /dev/null; then
- :
- else
- cat <<EOF 1>&2
-
-*** Warning: the command libtool uses to detect shared libraries,
-*** $file_magic_cmd, produces output that libtool cannot recognize.
-*** The result is that libtool may fail to recognize shared libraries
-*** as such. This will affect the creation of libtool libraries that
-*** depend on shared libraries, but programs linked with such libtool
-*** libraries will work regardless of this problem. Nevertheless, you
-*** may want to report the problem to your system manager and/or to
-*** bug-libtool@gnu.org
-
-EOF
- fi ;;
- esac
- fi
- break
- fi
- done
- IFS="$lt_save_ifs"
- MAGIC_CMD="$lt_save_MAGIC_CMD"
- ;;
-esac])
-MAGIC_CMD="$lt_cv_path_MAGIC_CMD"
-if test -n "$MAGIC_CMD"; then
- AC_MSG_RESULT($MAGIC_CMD)
-else
- AC_MSG_RESULT(no)
-fi
-])# AC_PATH_TOOL_PREFIX
-
-
-# AC_PATH_MAGIC
-# -------------
-# find a file program which can recognize a shared library
-AC_DEFUN([AC_PATH_MAGIC],
-[AC_PATH_TOOL_PREFIX(${ac_tool_prefix}file, /usr/bin$PATH_SEPARATOR$PATH)
-if test -z "$lt_cv_path_MAGIC_CMD"; then
- if test -n "$ac_tool_prefix"; then
- AC_PATH_TOOL_PREFIX(file, /usr/bin$PATH_SEPARATOR$PATH)
- else
- MAGIC_CMD=:
- fi
-fi
-])# AC_PATH_MAGIC
-
-
-# AC_PROG_LD
-# ----------
-# find the pathname to the GNU or non-GNU linker
-AC_DEFUN([AC_PROG_LD],
-[AC_ARG_WITH([gnu-ld],
- [AC_HELP_STRING([--with-gnu-ld],
- [assume the C compiler uses GNU ld @<:@default=no@:>@])],
- [test "$withval" = no || with_gnu_ld=yes],
- [with_gnu_ld=no])
-AC_REQUIRE([LT_AC_PROG_SED])dnl
-AC_REQUIRE([AC_PROG_CC])dnl
-AC_REQUIRE([AC_CANONICAL_HOST])dnl
-AC_REQUIRE([AC_CANONICAL_BUILD])dnl
-ac_prog=ld
-if test "$GCC" = yes; then
- # Check if gcc -print-prog-name=ld gives a path.
- AC_MSG_CHECKING([for ld used by $CC])
- case $host in
- *-*-mingw*)
- # gcc leaves a trailing carriage return which upsets mingw
- ac_prog=`($CC -print-prog-name=ld) 2>&5 | tr -d '\015'` ;;
- *)
- ac_prog=`($CC -print-prog-name=ld) 2>&5` ;;
- esac
- case $ac_prog in
- # Accept absolute paths.
- [[\\/]]* | ?:[[\\/]]*)
- re_direlt='/[[^/]][[^/]]*/\.\./'
- # Canonicalize the pathname of ld
- ac_prog=`echo $ac_prog| $SED 's%\\\\%/%g'`
- while echo $ac_prog | grep "$re_direlt" > /dev/null 2>&1; do
- ac_prog=`echo $ac_prog| $SED "s%$re_direlt%/%"`
- done
- test -z "$LD" && LD="$ac_prog"
- ;;
- "")
- # If it fails, then pretend we aren't using GCC.
- ac_prog=ld
- ;;
- *)
- # If it is relative, then search for the first ld in PATH.
- with_gnu_ld=unknown
- ;;
- esac
-elif test "$with_gnu_ld" = yes; then
- AC_MSG_CHECKING([for GNU ld])
-else
- AC_MSG_CHECKING([for non-GNU ld])
-fi
-AC_CACHE_VAL(lt_cv_path_LD,
-[if test -z "$LD"; then
- lt_save_ifs="$IFS"; IFS=$PATH_SEPARATOR
- for ac_dir in $PATH; do
- IFS="$lt_save_ifs"
- test -z "$ac_dir" && ac_dir=.
- if test -f "$ac_dir/$ac_prog" || test -f "$ac_dir/$ac_prog$ac_exeext"; then
- lt_cv_path_LD="$ac_dir/$ac_prog"
- # Check to see if the program is GNU ld. I'd rather use --version,
- # but apparently some variants of GNU ld only accept -v.
- # Break only if it was the GNU/non-GNU ld that we prefer.
- case `"$lt_cv_path_LD" -v 2>&1 </dev/null` in
- *GNU* | *'with BFD'*)
- test "$with_gnu_ld" != no && break
- ;;
- *)
- test "$with_gnu_ld" != yes && break
- ;;
- esac
- fi
- done
- IFS="$lt_save_ifs"
-else
- lt_cv_path_LD="$LD" # Let the user override the test with a path.
-fi])
-LD="$lt_cv_path_LD"
-if test -n "$LD"; then
- AC_MSG_RESULT($LD)
-else
- AC_MSG_RESULT(no)
-fi
-test -z "$LD" && AC_MSG_ERROR([no acceptable ld found in \$PATH])
-AC_PROG_LD_GNU
-])# AC_PROG_LD
-
-
-# AC_PROG_LD_GNU
-# --------------
-AC_DEFUN([AC_PROG_LD_GNU],
-[AC_REQUIRE([AC_PROG_EGREP])dnl
-AC_CACHE_CHECK([if the linker ($LD) is GNU ld], lt_cv_prog_gnu_ld,
-[# I'd rather use --version here, but apparently some GNU lds only accept -v.
-case `$LD -v 2>&1 </dev/null` in
-*GNU* | *'with BFD'*)
- lt_cv_prog_gnu_ld=yes
- ;;
-*)
- lt_cv_prog_gnu_ld=no
- ;;
-esac])
-with_gnu_ld=$lt_cv_prog_gnu_ld
-])# AC_PROG_LD_GNU
-
-
-# AC_PROG_LD_RELOAD_FLAG
-# ----------------------
-# find reload flag for linker
-# -- PORTME Some linkers may need a different reload flag.
-AC_DEFUN([AC_PROG_LD_RELOAD_FLAG],
-[AC_CACHE_CHECK([for $LD option to reload object files],
- lt_cv_ld_reload_flag,
- [lt_cv_ld_reload_flag='-r'])
-reload_flag=$lt_cv_ld_reload_flag
-case $reload_flag in
-"" | " "*) ;;
-*) reload_flag=" $reload_flag" ;;
-esac
-reload_cmds='$LD$reload_flag -o $output$reload_objs'
-case $host_os in
- darwin*)
- if test "$GCC" = yes; then
- reload_cmds='$LTCC $LTCFLAGS -nostdlib ${wl}-r -o $output$reload_objs'
- else
- reload_cmds='$LD$reload_flag -o $output$reload_objs'
- fi
- ;;
-esac
-])# AC_PROG_LD_RELOAD_FLAG
-
-
-# AC_DEPLIBS_CHECK_METHOD
-# -----------------------
-# how to check for library dependencies
-# -- PORTME fill in with the dynamic library characteristics
-AC_DEFUN([AC_DEPLIBS_CHECK_METHOD],
-[AC_CACHE_CHECK([how to recognize dependent libraries],
-lt_cv_deplibs_check_method,
-[lt_cv_file_magic_cmd='$MAGIC_CMD'
-lt_cv_file_magic_test_file=
-lt_cv_deplibs_check_method='unknown'
-# Need to set the preceding variable on all platforms that support
-# interlibrary dependencies.
-# 'none' -- dependencies not supported.
-# `unknown' -- same as none, but documents that we really don't know.
-# 'pass_all' -- all dependencies passed with no checks.
-# 'test_compile' -- check by making test program.
-# 'file_magic [[regex]]' -- check by looking for files in library path
-# which responds to the $file_magic_cmd with a given extended regex.
-# If you have `file' or equivalent on your system and you're not sure
-# whether `pass_all' will *always* work, you probably want this one.
-
-case $host_os in
-aix[[4-9]]*)
- lt_cv_deplibs_check_method=pass_all
- ;;
-
-beos*)
- lt_cv_deplibs_check_method=pass_all
- ;;
-
-bsdi[[45]]*)
- lt_cv_deplibs_check_method='file_magic ELF [[0-9]][[0-9]]*-bit [[ML]]SB (shared object|dynamic lib)'
- lt_cv_file_magic_cmd='/usr/bin/file -L'
- lt_cv_file_magic_test_file=/shlib/libc.so
- ;;
-
-cygwin*)
- # func_win32_libid is a shell function defined in ltmain.sh
- lt_cv_deplibs_check_method='file_magic ^x86 archive import|^x86 DLL'
- lt_cv_file_magic_cmd='func_win32_libid'
- ;;
-
-mingw* | pw32*)
- # Base MSYS/MinGW do not provide the 'file' command needed by
- # func_win32_libid shell function, so use a weaker test based on 'objdump',
- # unless we find 'file', for example because we are cross-compiling.
- if ( file / ) >/dev/null 2>&1; then
- lt_cv_deplibs_check_method='file_magic ^x86 archive import|^x86 DLL'
- lt_cv_file_magic_cmd='func_win32_libid'
- else
- lt_cv_deplibs_check_method='file_magic file format pei*-i386(.*architecture: i386)?'
- lt_cv_file_magic_cmd='$OBJDUMP -f'
- fi
- ;;
-
-darwin* | rhapsody*)
- lt_cv_deplibs_check_method=pass_all
- ;;
-
-freebsd* | dragonfly*)
- if echo __ELF__ | $CC -E - | grep __ELF__ > /dev/null; then
- case $host_cpu in
- i*86 )
- # Not sure whether the presence of OpenBSD here was a mistake.
- # Let's accept both of them until this is cleared up.
- lt_cv_deplibs_check_method='file_magic (FreeBSD|OpenBSD|DragonFly)/i[[3-9]]86 (compact )?demand paged shared library'
- lt_cv_file_magic_cmd=/usr/bin/file
- lt_cv_file_magic_test_file=`echo /usr/lib/libc.so.*`
- ;;
- esac
- else
- lt_cv_deplibs_check_method=pass_all
- fi
- ;;
-
-gnu*)
- lt_cv_deplibs_check_method=pass_all
- ;;
-
-hpux10.20* | hpux11*)
- lt_cv_file_magic_cmd=/usr/bin/file
- case $host_cpu in
- ia64*)
- lt_cv_deplibs_check_method='file_magic (s[[0-9]][[0-9]][[0-9]]|ELF-[[0-9]][[0-9]]) shared object file - IA64'
- lt_cv_file_magic_test_file=/usr/lib/hpux32/libc.so
- ;;
- hppa*64*)
- [lt_cv_deplibs_check_method='file_magic (s[0-9][0-9][0-9]|ELF-[0-9][0-9]) shared object file - PA-RISC [0-9].[0-9]']
- lt_cv_file_magic_test_file=/usr/lib/pa20_64/libc.sl
- ;;
- *)
- lt_cv_deplibs_check_method='file_magic (s[[0-9]][[0-9]][[0-9]]|PA-RISC[[0-9]].[[0-9]]) shared library'
- lt_cv_file_magic_test_file=/usr/lib/libc.sl
- ;;
- esac
- ;;
-
-interix[[3-9]]*)
- # PIC code is broken on Interix 3.x, that's why |\.a not |_pic\.a here
- lt_cv_deplibs_check_method='match_pattern /lib[[^/]]+(\.so|\.a)$'
- ;;
-
-irix5* | irix6* | nonstopux*)
- case $LD in
- *-32|*"-32 ") libmagic=32-bit;;
- *-n32|*"-n32 ") libmagic=N32;;
- *-64|*"-64 ") libmagic=64-bit;;
- *) libmagic=never-match;;
- esac
- lt_cv_deplibs_check_method=pass_all
- ;;
-
-# This must be Linux ELF.
-linux* | k*bsd*-gnu)
- lt_cv_deplibs_check_method=pass_all
- ;;
-
-netbsd*)
- if echo __ELF__ | $CC -E - | grep __ELF__ > /dev/null; then
- lt_cv_deplibs_check_method='match_pattern /lib[[^/]]+(\.so\.[[0-9]]+\.[[0-9]]+|_pic\.a)$'
- else
- lt_cv_deplibs_check_method='match_pattern /lib[[^/]]+(\.so|_pic\.a)$'
- fi
- ;;
-
-newos6*)
- lt_cv_deplibs_check_method='file_magic ELF [[0-9]][[0-9]]*-bit [[ML]]SB (executable|dynamic lib)'
- lt_cv_file_magic_cmd=/usr/bin/file
- lt_cv_file_magic_test_file=/usr/lib/libnls.so
- ;;
-
-nto-qnx*)
- lt_cv_deplibs_check_method=unknown
- ;;
-
-openbsd*)
- if test -z "`echo __ELF__ | $CC -E - | grep __ELF__`" || test "$host_os-$host_cpu" = "openbsd2.8-powerpc"; then
- lt_cv_deplibs_check_method='match_pattern /lib[[^/]]+(\.so\.[[0-9]]+\.[[0-9]]+|\.so|_pic\.a)$'
- else
- lt_cv_deplibs_check_method='match_pattern /lib[[^/]]+(\.so\.[[0-9]]+\.[[0-9]]+|_pic\.a)$'
- fi
- ;;
-
-osf3* | osf4* | osf5*)
- lt_cv_deplibs_check_method=pass_all
- ;;
-
-rdos*)
- lt_cv_deplibs_check_method=pass_all
- ;;
-
-solaris*)
- lt_cv_deplibs_check_method=pass_all
- ;;
-
-sysv4 | sysv4.3*)
- case $host_vendor in
- motorola)
- lt_cv_deplibs_check_method='file_magic ELF [[0-9]][[0-9]]*-bit [[ML]]SB (shared object|dynamic lib) M[[0-9]][[0-9]]* Version [[0-9]]'
- lt_cv_file_magic_test_file=`echo /usr/lib/libc.so*`
- ;;
- ncr)
- lt_cv_deplibs_check_method=pass_all
- ;;
- sequent)
- lt_cv_file_magic_cmd='/bin/file'
- lt_cv_deplibs_check_method='file_magic ELF [[0-9]][[0-9]]*-bit [[LM]]SB (shared object|dynamic lib )'
- ;;
- sni)
- lt_cv_file_magic_cmd='/bin/file'
- lt_cv_deplibs_check_method="file_magic ELF [[0-9]][[0-9]]*-bit [[LM]]SB dynamic lib"
- lt_cv_file_magic_test_file=/lib/libc.so
- ;;
- siemens)
- lt_cv_deplibs_check_method=pass_all
- ;;
- pc)
- lt_cv_deplibs_check_method=pass_all
- ;;
- esac
- ;;
-
-sysv5* | sco3.2v5* | sco5v6* | unixware* | OpenUNIX* | sysv4*uw2*)
- lt_cv_deplibs_check_method=pass_all
- ;;
-esac
-])
-file_magic_cmd=$lt_cv_file_magic_cmd
-deplibs_check_method=$lt_cv_deplibs_check_method
-test -z "$deplibs_check_method" && deplibs_check_method=unknown
-])# AC_DEPLIBS_CHECK_METHOD
-
-
-# AC_PROG_NM
-# ----------
-# find the pathname to a BSD-compatible name lister
-AC_DEFUN([AC_PROG_NM],
-[AC_CACHE_CHECK([for BSD-compatible nm], lt_cv_path_NM,
-[if test -n "$NM"; then
- # Let the user override the test.
- lt_cv_path_NM="$NM"
-else
- lt_nm_to_check="${ac_tool_prefix}nm"
- if test -n "$ac_tool_prefix" && test "$build" = "$host"; then
- lt_nm_to_check="$lt_nm_to_check nm"
- fi
- for lt_tmp_nm in $lt_nm_to_check; do
- lt_save_ifs="$IFS"; IFS=$PATH_SEPARATOR
- for ac_dir in $PATH /usr/ccs/bin/elf /usr/ccs/bin /usr/ucb /bin; do
- IFS="$lt_save_ifs"
- test -z "$ac_dir" && ac_dir=.
- tmp_nm="$ac_dir/$lt_tmp_nm"
- if test -f "$tmp_nm" || test -f "$tmp_nm$ac_exeext" ; then
- # Check to see if the nm accepts a BSD-compat flag.
- # Adding the `sed 1q' prevents false positives on HP-UX, which says:
- # nm: unknown option "B" ignored
- # Tru64's nm complains that /dev/null is an invalid object file
- case `"$tmp_nm" -B /dev/null 2>&1 | sed '1q'` in
- */dev/null* | *'Invalid file or object type'*)
- lt_cv_path_NM="$tmp_nm -B"
- break
- ;;
- *)
- case `"$tmp_nm" -p /dev/null 2>&1 | sed '1q'` in
- */dev/null*)
- lt_cv_path_NM="$tmp_nm -p"
- break
- ;;
- *)
- lt_cv_path_NM=${lt_cv_path_NM="$tmp_nm"} # keep the first match, but
- continue # so that we can try to find one that supports BSD flags
- ;;
- esac
- ;;
- esac
- fi
- done
- IFS="$lt_save_ifs"
- done
- test -z "$lt_cv_path_NM" && lt_cv_path_NM=nm
-fi])
-NM="$lt_cv_path_NM"
-])# AC_PROG_NM
-
-
-# AC_CHECK_LIBM
-# -------------
-# check for math library
-AC_DEFUN([AC_CHECK_LIBM],
-[AC_REQUIRE([AC_CANONICAL_HOST])dnl
-LIBM=
-case $host in
-*-*-beos* | *-*-cygwin* | *-*-pw32* | *-*-darwin*)
- # These system don't have libm, or don't need it
- ;;
-*-ncr-sysv4.3*)
- AC_CHECK_LIB(mw, _mwvalidcheckl, LIBM="-lmw")
- AC_CHECK_LIB(m, cos, LIBM="$LIBM -lm")
- ;;
-*)
- AC_CHECK_LIB(m, cos, LIBM="-lm")
- ;;
-esac
-])# AC_CHECK_LIBM
-
-
-# AC_LIBLTDL_CONVENIENCE([DIRECTORY])
-# -----------------------------------
-# sets LIBLTDL to the link flags for the libltdl convenience library and
-# LTDLINCL to the include flags for the libltdl header and adds
-# --enable-ltdl-convenience to the configure arguments. Note that
-# AC_CONFIG_SUBDIRS is not called here. If DIRECTORY is not provided,
-# it is assumed to be `libltdl'. LIBLTDL will be prefixed with
-# '${top_builddir}/' and LTDLINCL will be prefixed with '${top_srcdir}/'
-# (note the single quotes!). If your package is not flat and you're not
-# using automake, define top_builddir and top_srcdir appropriately in
-# the Makefiles.
-AC_DEFUN([AC_LIBLTDL_CONVENIENCE],
-[AC_BEFORE([$0],[AC_LIBTOOL_SETUP])dnl
- case $enable_ltdl_convenience in
- no) AC_MSG_ERROR([this package needs a convenience libltdl]) ;;
- "") enable_ltdl_convenience=yes
- ac_configure_args="$ac_configure_args --enable-ltdl-convenience" ;;
- esac
- LIBLTDL='${top_builddir}/'ifelse($#,1,[$1],['libltdl'])/libltdlc.la
- LTDLINCL='-I${top_srcdir}/'ifelse($#,1,[$1],['libltdl'])
- # For backwards non-gettext consistent compatibility...
- INCLTDL="$LTDLINCL"
-])# AC_LIBLTDL_CONVENIENCE
-
-
-# AC_LIBLTDL_INSTALLABLE([DIRECTORY])
-# -----------------------------------
-# sets LIBLTDL to the link flags for the libltdl installable library and
-# LTDLINCL to the include flags for the libltdl header and adds
-# --enable-ltdl-install to the configure arguments. Note that
-# AC_CONFIG_SUBDIRS is not called here. If DIRECTORY is not provided,
-# and an installed libltdl is not found, it is assumed to be `libltdl'.
-# LIBLTDL will be prefixed with '${top_builddir}/'# and LTDLINCL with
-# '${top_srcdir}/' (note the single quotes!). If your package is not
-# flat and you're not using automake, define top_builddir and top_srcdir
-# appropriately in the Makefiles.
-# In the future, this macro may have to be called after AC_PROG_LIBTOOL.
-AC_DEFUN([AC_LIBLTDL_INSTALLABLE],
-[AC_BEFORE([$0],[AC_LIBTOOL_SETUP])dnl
- AC_CHECK_LIB(ltdl, lt_dlinit,
- [test x"$enable_ltdl_install" != xyes && enable_ltdl_install=no],
- [if test x"$enable_ltdl_install" = xno; then
- AC_MSG_WARN([libltdl not installed, but installation disabled])
- else
- enable_ltdl_install=yes
- fi
- ])
- if test x"$enable_ltdl_install" = x"yes"; then
- ac_configure_args="$ac_configure_args --enable-ltdl-install"
- LIBLTDL='${top_builddir}/'ifelse($#,1,[$1],['libltdl'])/libltdl.la
- LTDLINCL='-I${top_srcdir}/'ifelse($#,1,[$1],['libltdl'])
- else
- ac_configure_args="$ac_configure_args --enable-ltdl-install=no"
- LIBLTDL="-lltdl"
- LTDLINCL=
- fi
- # For backwards non-gettext consistent compatibility...
- INCLTDL="$LTDLINCL"
-])# AC_LIBLTDL_INSTALLABLE
-
-
-# AC_LIBTOOL_CXX
-# --------------
-# enable support for C++ libraries
-AC_DEFUN([AC_LIBTOOL_CXX],
-[AC_REQUIRE([_LT_AC_LANG_CXX])
-])# AC_LIBTOOL_CXX
-
-
-# _LT_AC_LANG_CXX
-# ---------------
-AC_DEFUN([_LT_AC_LANG_CXX],
-[AC_REQUIRE([AC_PROG_CXX])
-AC_REQUIRE([_LT_AC_PROG_CXXCPP])
-_LT_AC_SHELL_INIT([tagnames=${tagnames+${tagnames},}CXX])
-])# _LT_AC_LANG_CXX
-
-# _LT_AC_PROG_CXXCPP
-# ------------------
-AC_DEFUN([_LT_AC_PROG_CXXCPP],
-[
-AC_REQUIRE([AC_PROG_CXX])
-if test -n "$CXX" && ( test "X$CXX" != "Xno" &&
- ( (test "X$CXX" = "Xg++" && `g++ -v >/dev/null 2>&1` ) ||
- (test "X$CXX" != "Xg++"))) ; then
- AC_PROG_CXXCPP
-fi
-])# _LT_AC_PROG_CXXCPP
-
-# AC_LIBTOOL_F77
-# --------------
-# enable support for Fortran 77 libraries
-AC_DEFUN([AC_LIBTOOL_F77],
-[AC_REQUIRE([_LT_AC_LANG_F77])
-])# AC_LIBTOOL_F77
-
-
-# _LT_AC_LANG_F77
-# ---------------
-AC_DEFUN([_LT_AC_LANG_F77],
-[AC_REQUIRE([AC_PROG_F77])
-_LT_AC_SHELL_INIT([tagnames=${tagnames+${tagnames},}F77])
-])# _LT_AC_LANG_F77
-
-
-# AC_LIBTOOL_GCJ
-# --------------
-# enable support for GCJ libraries
-AC_DEFUN([AC_LIBTOOL_GCJ],
-[AC_REQUIRE([_LT_AC_LANG_GCJ])
-])# AC_LIBTOOL_GCJ
-
-
-# _LT_AC_LANG_GCJ
-# ---------------
-AC_DEFUN([_LT_AC_LANG_GCJ],
-[AC_PROVIDE_IFELSE([AC_PROG_GCJ],[],
- [AC_PROVIDE_IFELSE([A][M_PROG_GCJ],[],
- [AC_PROVIDE_IFELSE([LT_AC_PROG_GCJ],[],
- [ifdef([AC_PROG_GCJ],[AC_REQUIRE([AC_PROG_GCJ])],
- [ifdef([A][M_PROG_GCJ],[AC_REQUIRE([A][M_PROG_GCJ])],
- [AC_REQUIRE([A][C_PROG_GCJ_OR_A][M_PROG_GCJ])])])])])])
-_LT_AC_SHELL_INIT([tagnames=${tagnames+${tagnames},}GCJ])
-])# _LT_AC_LANG_GCJ
-
-
-# AC_LIBTOOL_RC
-# -------------
-# enable support for Windows resource files
-AC_DEFUN([AC_LIBTOOL_RC],
-[AC_REQUIRE([LT_AC_PROG_RC])
-_LT_AC_SHELL_INIT([tagnames=${tagnames+${tagnames},}RC])
-])# AC_LIBTOOL_RC
-
-
-# AC_LIBTOOL_LANG_C_CONFIG
-# ------------------------
-# Ensure that the configuration vars for the C compiler are
-# suitably defined. Those variables are subsequently used by
-# AC_LIBTOOL_CONFIG to write the compiler configuration to `libtool'.
-AC_DEFUN([AC_LIBTOOL_LANG_C_CONFIG], [_LT_AC_LANG_C_CONFIG])
-AC_DEFUN([_LT_AC_LANG_C_CONFIG],
-[lt_save_CC="$CC"
-AC_LANG_PUSH(C)
-
-# Source file extension for C test sources.
-ac_ext=c
-
-# Object file extension for compiled C test sources.
-objext=o
-_LT_AC_TAGVAR(objext, $1)=$objext
-
-# Code to be used in simple compile tests
-lt_simple_compile_test_code="int some_variable = 0;"
-
-# Code to be used in simple link tests
-lt_simple_link_test_code='int main(){return(0);}'
-
-_LT_AC_SYS_COMPILER
-
-# save warnings/boilerplate of simple test code
-_LT_COMPILER_BOILERPLATE
-_LT_LINKER_BOILERPLATE
-
-AC_LIBTOOL_PROG_COMPILER_NO_RTTI($1)
-AC_LIBTOOL_PROG_COMPILER_PIC($1)
-AC_LIBTOOL_PROG_CC_C_O($1)
-AC_LIBTOOL_SYS_HARD_LINK_LOCKS($1)
-AC_LIBTOOL_PROG_LD_SHLIBS($1)
-AC_LIBTOOL_SYS_DYNAMIC_LINKER($1)
-AC_LIBTOOL_PROG_LD_HARDCODE_LIBPATH($1)
-AC_LIBTOOL_SYS_LIB_STRIP
-AC_LIBTOOL_DLOPEN_SELF
-
-# Report which library types will actually be built
-AC_MSG_CHECKING([if libtool supports shared libraries])
-AC_MSG_RESULT([$can_build_shared])
-
-AC_MSG_CHECKING([whether to build shared libraries])
-test "$can_build_shared" = "no" && enable_shared=no
-
-# On AIX, shared libraries and static libraries use the same namespace, and
-# are all built from PIC.
-case $host_os in
-aix3*)
- test "$enable_shared" = yes && enable_static=no
- if test -n "$RANLIB"; then
- archive_cmds="$archive_cmds~\$RANLIB \$lib"
- postinstall_cmds='$RANLIB $lib'
- fi
- ;;
-
-aix[[4-9]]*)
- if test "$host_cpu" != ia64 && test "$aix_use_runtimelinking" = no ; then
- test "$enable_shared" = yes && enable_static=no
- fi
- ;;
-esac
-AC_MSG_RESULT([$enable_shared])
-
-AC_MSG_CHECKING([whether to build static libraries])
-# Make sure either enable_shared or enable_static is yes.
-test "$enable_shared" = yes || enable_static=yes
-AC_MSG_RESULT([$enable_static])
-
-AC_LIBTOOL_CONFIG($1)
-
-AC_LANG_POP
-CC="$lt_save_CC"
-])# AC_LIBTOOL_LANG_C_CONFIG
-
-
-# AC_LIBTOOL_LANG_CXX_CONFIG
-# --------------------------
-# Ensure that the configuration vars for the C compiler are
-# suitably defined. Those variables are subsequently used by
-# AC_LIBTOOL_CONFIG to write the compiler configuration to `libtool'.
-AC_DEFUN([AC_LIBTOOL_LANG_CXX_CONFIG], [_LT_AC_LANG_CXX_CONFIG(CXX)])
-AC_DEFUN([_LT_AC_LANG_CXX_CONFIG],
-[AC_LANG_PUSH(C++)
-AC_REQUIRE([AC_PROG_CXX])
-AC_REQUIRE([_LT_AC_PROG_CXXCPP])
-
-_LT_AC_TAGVAR(archive_cmds_need_lc, $1)=no
-_LT_AC_TAGVAR(allow_undefined_flag, $1)=
-_LT_AC_TAGVAR(always_export_symbols, $1)=no
-_LT_AC_TAGVAR(archive_expsym_cmds, $1)=
-_LT_AC_TAGVAR(export_dynamic_flag_spec, $1)=
-_LT_AC_TAGVAR(hardcode_direct, $1)=no
-_LT_AC_TAGVAR(hardcode_libdir_flag_spec, $1)=
-_LT_AC_TAGVAR(hardcode_libdir_flag_spec_ld, $1)=
-_LT_AC_TAGVAR(hardcode_libdir_separator, $1)=
-_LT_AC_TAGVAR(hardcode_minus_L, $1)=no
-_LT_AC_TAGVAR(hardcode_shlibpath_var, $1)=unsupported
-_LT_AC_TAGVAR(hardcode_automatic, $1)=no
-_LT_AC_TAGVAR(module_cmds, $1)=
-_LT_AC_TAGVAR(module_expsym_cmds, $1)=
-_LT_AC_TAGVAR(link_all_deplibs, $1)=unknown
-_LT_AC_TAGVAR(old_archive_cmds, $1)=$old_archive_cmds
-_LT_AC_TAGVAR(no_undefined_flag, $1)=
-_LT_AC_TAGVAR(whole_archive_flag_spec, $1)=
-_LT_AC_TAGVAR(enable_shared_with_static_runtimes, $1)=no
-
-# Dependencies to place before and after the object being linked:
-_LT_AC_TAGVAR(predep_objects, $1)=
-_LT_AC_TAGVAR(postdep_objects, $1)=
-_LT_AC_TAGVAR(predeps, $1)=
-_LT_AC_TAGVAR(postdeps, $1)=
-_LT_AC_TAGVAR(compiler_lib_search_path, $1)=
-_LT_AC_TAGVAR(compiler_lib_search_dirs, $1)=
-
-# Source file extension for C++ test sources.
-ac_ext=cpp
-
-# Object file extension for compiled C++ test sources.
-objext=o
-_LT_AC_TAGVAR(objext, $1)=$objext
-
-# Code to be used in simple compile tests
-lt_simple_compile_test_code="int some_variable = 0;"
-
-# Code to be used in simple link tests
-lt_simple_link_test_code='int main(int, char *[[]]) { return(0); }'
-
-# ltmain only uses $CC for tagged configurations so make sure $CC is set.
-_LT_AC_SYS_COMPILER
-
-# save warnings/boilerplate of simple test code
-_LT_COMPILER_BOILERPLATE
-_LT_LINKER_BOILERPLATE
-
-# Allow CC to be a program name with arguments.
-lt_save_CC=$CC
-lt_save_LD=$LD
-lt_save_GCC=$GCC
-GCC=$GXX
-lt_save_with_gnu_ld=$with_gnu_ld
-lt_save_path_LD=$lt_cv_path_LD
-if test -n "${lt_cv_prog_gnu_ldcxx+set}"; then
- lt_cv_prog_gnu_ld=$lt_cv_prog_gnu_ldcxx
-else
- $as_unset lt_cv_prog_gnu_ld
-fi
-if test -n "${lt_cv_path_LDCXX+set}"; then
- lt_cv_path_LD=$lt_cv_path_LDCXX
-else
- $as_unset lt_cv_path_LD
-fi
-test -z "${LDCXX+set}" || LD=$LDCXX
-CC=${CXX-"c++"}
-compiler=$CC
-_LT_AC_TAGVAR(compiler, $1)=$CC
-_LT_CC_BASENAME([$compiler])
-
-# We don't want -fno-exception wen compiling C++ code, so set the
-# no_builtin_flag separately
-if test "$GXX" = yes; then
- _LT_AC_TAGVAR(lt_prog_compiler_no_builtin_flag, $1)=' -fno-builtin'
-else
- _LT_AC_TAGVAR(lt_prog_compiler_no_builtin_flag, $1)=
-fi
-
-if test "$GXX" = yes; then
- # Set up default GNU C++ configuration
-
- AC_PROG_LD
-
- # Check if GNU C++ uses GNU ld as the underlying linker, since the
- # archiving commands below assume that GNU ld is being used.
- if test "$with_gnu_ld" = yes; then
- _LT_AC_TAGVAR(archive_cmds, $1)='$CC -shared -nostdlib $predep_objects $libobjs $deplibs $postdep_objects $compiler_flags ${wl}-soname $wl$soname -o $lib'
- _LT_AC_TAGVAR(archive_expsym_cmds, $1)='$CC -shared -nostdlib $predep_objects $libobjs $deplibs $postdep_objects $compiler_flags ${wl}-soname $wl$soname ${wl}-retain-symbols-file $wl$export_symbols -o $lib'
-
- _LT_AC_TAGVAR(hardcode_libdir_flag_spec, $1)='${wl}--rpath ${wl}$libdir'
- _LT_AC_TAGVAR(export_dynamic_flag_spec, $1)='${wl}--export-dynamic'
-
- # If archive_cmds runs LD, not CC, wlarc should be empty
- # XXX I think wlarc can be eliminated in ltcf-cxx, but I need to
- # investigate it a little bit more. (MM)
- wlarc='${wl}'
-
- # ancient GNU ld didn't support --whole-archive et. al.
- if eval "`$CC -print-prog-name=ld` --help 2>&1" | \
- grep 'no-whole-archive' > /dev/null; then
- _LT_AC_TAGVAR(whole_archive_flag_spec, $1)="$wlarc"'--whole-archive$convenience '"$wlarc"'--no-whole-archive'
- else
- _LT_AC_TAGVAR(whole_archive_flag_spec, $1)=
- fi
- else
- with_gnu_ld=no
- wlarc=
-
- # A generic and very simple default shared library creation
- # command for GNU C++ for the case where it uses the native
- # linker, instead of GNU ld. If possible, this setting should
- # overridden to take advantage of the native linker features on
- # the platform it is being used on.
- _LT_AC_TAGVAR(archive_cmds, $1)='$CC -shared -nostdlib $predep_objects $libobjs $deplibs $postdep_objects $compiler_flags -o $lib'
- fi
-
- # Commands to make compiler produce verbose output that lists
- # what "hidden" libraries, object files and flags are used when
- # linking a shared library.
- output_verbose_link_cmd='$CC -shared $CFLAGS -v conftest.$objext 2>&1 | grep "\-L"'
-
-else
- GXX=no
- with_gnu_ld=no
- wlarc=
-fi
-
-# PORTME: fill in a description of your system's C++ link characteristics
-AC_MSG_CHECKING([whether the $compiler linker ($LD) supports shared libraries])
-_LT_AC_TAGVAR(ld_shlibs, $1)=yes
-case $host_os in
- aix3*)
- # FIXME: insert proper C++ library support
- _LT_AC_TAGVAR(ld_shlibs, $1)=no
- ;;
- aix[[4-9]]*)
- if test "$host_cpu" = ia64; then
- # On IA64, the linker does run time linking by default, so we don't
- # have to do anything special.
- aix_use_runtimelinking=no
- exp_sym_flag='-Bexport'
- no_entry_flag=""
- else
- aix_use_runtimelinking=no
-
- # Test if we are trying to use run time linking or normal
- # AIX style linking. If -brtl is somewhere in LDFLAGS, we
- # need to do runtime linking.
- case $host_os in aix4.[[23]]|aix4.[[23]].*|aix[[5-9]]*)
- for ld_flag in $LDFLAGS; do
- case $ld_flag in
- *-brtl*)
- aix_use_runtimelinking=yes
- break
- ;;
- esac
- done
- ;;
- esac
-
- exp_sym_flag='-bexport'
- no_entry_flag='-bnoentry'
- fi
-
- # When large executables or shared objects are built, AIX ld can
- # have problems creating the table of contents. If linking a library
- # or program results in "error TOC overflow" add -mminimal-toc to
- # CXXFLAGS/CFLAGS for g++/gcc. In the cases where that is not
- # enough to fix the problem, add -Wl,-bbigtoc to LDFLAGS.
-
- _LT_AC_TAGVAR(archive_cmds, $1)=''
- _LT_AC_TAGVAR(hardcode_direct, $1)=yes
- _LT_AC_TAGVAR(hardcode_libdir_separator, $1)=':'
- _LT_AC_TAGVAR(link_all_deplibs, $1)=yes
-
- if test "$GXX" = yes; then
- case $host_os in aix4.[[012]]|aix4.[[012]].*)
- # We only want to do this on AIX 4.2 and lower, the check
- # below for broken collect2 doesn't work under 4.3+
- collect2name=`${CC} -print-prog-name=collect2`
- if test -f "$collect2name" && \
- strings "$collect2name" | grep resolve_lib_name >/dev/null
- then
- # We have reworked collect2
- :
- else
- # We have old collect2
- _LT_AC_TAGVAR(hardcode_direct, $1)=unsupported
- # It fails to find uninstalled libraries when the uninstalled
- # path is not listed in the libpath. Setting hardcode_minus_L
- # to unsupported forces relinking
- _LT_AC_TAGVAR(hardcode_minus_L, $1)=yes
- _LT_AC_TAGVAR(hardcode_libdir_flag_spec, $1)='-L$libdir'
- _LT_AC_TAGVAR(hardcode_libdir_separator, $1)=
- fi
- ;;
- esac
- shared_flag='-shared'
- if test "$aix_use_runtimelinking" = yes; then
- shared_flag="$shared_flag "'${wl}-G'
- fi
- else
- # not using gcc
- if test "$host_cpu" = ia64; then
- # VisualAge C++, Version 5.5 for AIX 5L for IA-64, Beta 3 Release
- # chokes on -Wl,-G. The following line is correct:
- shared_flag='-G'
- else
- if test "$aix_use_runtimelinking" = yes; then
- shared_flag='${wl}-G'
- else
- shared_flag='${wl}-bM:SRE'
- fi
- fi
- fi
-
- # It seems that -bexpall does not export symbols beginning with
- # underscore (_), so it is better to generate a list of symbols to export.
- _LT_AC_TAGVAR(always_export_symbols, $1)=yes
- if test "$aix_use_runtimelinking" = yes; then
- # Warning - without using the other runtime loading flags (-brtl),
- # -berok will link without error, but may produce a broken library.
- _LT_AC_TAGVAR(allow_undefined_flag, $1)='-berok'
- # Determine the default libpath from the value encoded in an empty executable.
- _LT_AC_SYS_LIBPATH_AIX
- _LT_AC_TAGVAR(hardcode_libdir_flag_spec, $1)='${wl}-blibpath:$libdir:'"$aix_libpath"
-
- _LT_AC_TAGVAR(archive_expsym_cmds, $1)="\$CC"' -o $output_objdir/$soname $libobjs $deplibs '"\${wl}$no_entry_flag"' $compiler_flags `if test "x${allow_undefined_flag}" != "x"; then echo "${wl}${allow_undefined_flag}"; else :; fi` '"\${wl}$exp_sym_flag:\$export_symbols $shared_flag"
- else
- if test "$host_cpu" = ia64; then
- _LT_AC_TAGVAR(hardcode_libdir_flag_spec, $1)='${wl}-R $libdir:/usr/lib:/lib'
- _LT_AC_TAGVAR(allow_undefined_flag, $1)="-z nodefs"
- _LT_AC_TAGVAR(archive_expsym_cmds, $1)="\$CC $shared_flag"' -o $output_objdir/$soname $libobjs $deplibs '"\${wl}$no_entry_flag"' $compiler_flags ${wl}${allow_undefined_flag} '"\${wl}$exp_sym_flag:\$export_symbols"
- else
- # Determine the default libpath from the value encoded in an empty executable.
- _LT_AC_SYS_LIBPATH_AIX
- _LT_AC_TAGVAR(hardcode_libdir_flag_spec, $1)='${wl}-blibpath:$libdir:'"$aix_libpath"
- # Warning - without using the other run time loading flags,
- # -berok will link without error, but may produce a broken library.
- _LT_AC_TAGVAR(no_undefined_flag, $1)=' ${wl}-bernotok'
- _LT_AC_TAGVAR(allow_undefined_flag, $1)=' ${wl}-berok'
- # Exported symbols can be pulled into shared objects from archives
- _LT_AC_TAGVAR(whole_archive_flag_spec, $1)='$convenience'
- _LT_AC_TAGVAR(archive_cmds_need_lc, $1)=yes
- # This is similar to how AIX traditionally builds its shared libraries.
- _LT_AC_TAGVAR(archive_expsym_cmds, $1)="\$CC $shared_flag"' -o $output_objdir/$soname $libobjs $deplibs ${wl}-bnoentry $compiler_flags ${wl}-bE:$export_symbols${allow_undefined_flag}~$AR $AR_FLAGS $output_objdir/$libname$release.a $output_objdir/$soname'
- fi
- fi
- ;;
-
- beos*)
- if $LD --help 2>&1 | grep ': supported targets:.* elf' > /dev/null; then
- _LT_AC_TAGVAR(allow_undefined_flag, $1)=unsupported
- # Joseph Beckenbach <jrb3@best.com> says some releases of gcc
- # support --undefined. This deserves some investigation. FIXME
- _LT_AC_TAGVAR(archive_cmds, $1)='$CC -nostart $libobjs $deplibs $compiler_flags ${wl}-soname $wl$soname -o $lib'
- else
- _LT_AC_TAGVAR(ld_shlibs, $1)=no
- fi
- ;;
-
- chorus*)
- case $cc_basename in
- *)
- # FIXME: insert proper C++ library support
- _LT_AC_TAGVAR(ld_shlibs, $1)=no
- ;;
- esac
- ;;
-
- cygwin* | mingw* | pw32*)
- # _LT_AC_TAGVAR(hardcode_libdir_flag_spec, $1) is actually meaningless,
- # as there is no search path for DLLs.
- _LT_AC_TAGVAR(hardcode_libdir_flag_spec, $1)='-L$libdir'
- _LT_AC_TAGVAR(allow_undefined_flag, $1)=unsupported
- _LT_AC_TAGVAR(always_export_symbols, $1)=no
- _LT_AC_TAGVAR(enable_shared_with_static_runtimes, $1)=yes
-
- if $LD --help 2>&1 | grep 'auto-import' > /dev/null; then
- _LT_AC_TAGVAR(archive_cmds, $1)='$CC -shared -nostdlib $predep_objects $libobjs $deplibs $postdep_objects $compiler_flags -o $output_objdir/$soname ${wl}--enable-auto-image-base -Xlinker --out-implib -Xlinker $lib'
- # If the export-symbols file already is a .def file (1st line
- # is EXPORTS), use it as is; otherwise, prepend...
- _LT_AC_TAGVAR(archive_expsym_cmds, $1)='if test "x`$SED 1q $export_symbols`" = xEXPORTS; then
- cp $export_symbols $output_objdir/$soname.def;
- else
- echo EXPORTS > $output_objdir/$soname.def;
- cat $export_symbols >> $output_objdir/$soname.def;
- fi~
- $CC -shared -nostdlib $output_objdir/$soname.def $predep_objects $libobjs $deplibs $postdep_objects $compiler_flags -o $output_objdir/$soname ${wl}--enable-auto-image-base -Xlinker --out-implib -Xlinker $lib'
- else
- _LT_AC_TAGVAR(ld_shlibs, $1)=no
- fi
- ;;
- darwin* | rhapsody*)
- _LT_AC_TAGVAR(archive_cmds_need_lc, $1)=no
- _LT_AC_TAGVAR(hardcode_direct, $1)=no
- _LT_AC_TAGVAR(hardcode_automatic, $1)=yes
- _LT_AC_TAGVAR(hardcode_shlibpath_var, $1)=unsupported
- _LT_AC_TAGVAR(whole_archive_flag_spec, $1)=''
- _LT_AC_TAGVAR(link_all_deplibs, $1)=yes
- _LT_AC_TAGVAR(allow_undefined_flag, $1)="$_lt_dar_allow_undefined"
- if test "$GXX" = yes ; then
- output_verbose_link_cmd='echo'
- _LT_AC_TAGVAR(archive_cmds, $1)="\$CC -dynamiclib \$allow_undefined_flag -o \$lib \$libobjs \$deplibs \$compiler_flags -install_name \$rpath/\$soname \$verstring $_lt_dar_single_mod${_lt_dsymutil}"
- _LT_AC_TAGVAR(module_cmds, $1)="\$CC \$allow_undefined_flag -o \$lib -bundle \$libobjs \$deplibs \$compiler_flags${_lt_dsymutil}"
- _LT_AC_TAGVAR(archive_expsym_cmds, $1)="sed 's,^,_,' < \$export_symbols > \$output_objdir/\${libname}-symbols.expsym~\$CC -dynamiclib \$allow_undefined_flag -o \$lib \$libobjs \$deplibs \$compiler_flags -install_name \$rpath/\$soname \$verstring ${_lt_dar_single_mod}${_lt_dar_export_syms}${_lt_dsymutil}"
- _LT_AC_TAGVAR(module_expsym_cmds, $1)="sed -e 's,^,_,' < \$export_symbols > \$output_objdir/\${libname}-symbols.expsym~\$CC \$allow_undefined_flag -o \$lib -bundle \$libobjs \$deplibs \$compiler_flags${_lt_dar_export_syms}${_lt_dsymutil}"
- if test "$lt_cv_apple_cc_single_mod" != "yes"; then
- _LT_AC_TAGVAR(archive_cmds, $1)="\$CC -r -keep_private_externs -nostdlib -o \${lib}-master.o \$libobjs~\$CC -dynamiclib \$allow_undefined_flag -o \$lib \${lib}-master.o \$deplibs \$compiler_flags -install_name \$rpath/\$soname \$verstring${_lt_dsymutil}"
- _LT_AC_TAGVAR(archive_expsym_cmds, $1)="sed 's,^,_,' < \$export_symbols > \$output_objdir/\${libname}-symbols.expsym~\$CC -r -keep_private_externs -nostdlib -o \${lib}-master.o \$libobjs~\$CC -dynamiclib \$allow_undefined_flag -o \$lib \${lib}-master.o \$deplibs \$compiler_flags -install_name \$rpath/\$soname \$verstring${_lt_dar_export_syms}${_lt_dsymutil}"
- fi
- else
- case $cc_basename in
- xlc*)
- output_verbose_link_cmd='echo'
- _LT_AC_TAGVAR(archive_cmds, $1)='$CC -qmkshrobj ${wl}-single_module $allow_undefined_flag -o $lib $libobjs $deplibs $compiler_flags ${wl}-install_name ${wl}`echo $rpath/$soname` $xlcverstring'
- _LT_AC_TAGVAR(module_cmds, $1)='$CC $allow_undefined_flag -o $lib -bundle $libobjs $deplibs$compiler_flags'
- # Don't fix this by using the ld -exported_symbols_list flag, it doesn't exist in older darwin lds
- _LT_AC_TAGVAR(archive_expsym_cmds, $1)='sed -e "s,#.*,," -e "s,^[ ]*,," -e "s,^\(..*\),_&," < $export_symbols > $output_objdir/${libname}-symbols.expsym~$CC -qmkshrobj ${wl}-single_module $allow_undefined_flag -o $lib $libobjs $deplibs $compiler_flags ${wl}-install_name ${wl}$rpath/$soname $xlcverstring~nmedit -s $output_objdir/${libname}-symbols.expsym ${lib}'
- _LT_AC_TAGVAR(module_expsym_cmds, $1)='sed -e "s,#.*,," -e "s,^[ ]*,," -e "s,^\(..*\),_&," < $export_symbols > $output_objdir/${libname}-symbols.expsym~$CC $allow_undefined_flag -o $lib -bundle $libobjs $deplibs$compiler_flags~nmedit -s $output_objdir/${libname}-symbols.expsym ${lib}'
- ;;
- *)
- _LT_AC_TAGVAR(ld_shlibs, $1)=no
- ;;
- esac
- fi
- ;;
-
- dgux*)
- case $cc_basename in
- ec++*)
- # FIXME: insert proper C++ library support
- _LT_AC_TAGVAR(ld_shlibs, $1)=no
- ;;
- ghcx*)
- # Green Hills C++ Compiler
- # FIXME: insert proper C++ library support
- _LT_AC_TAGVAR(ld_shlibs, $1)=no
- ;;
- *)
- # FIXME: insert proper C++ library support
- _LT_AC_TAGVAR(ld_shlibs, $1)=no
- ;;
- esac
- ;;
- freebsd[[12]]*)
- # C++ shared libraries reported to be fairly broken before switch to ELF
- _LT_AC_TAGVAR(ld_shlibs, $1)=no
- ;;
- freebsd-elf*)
- _LT_AC_TAGVAR(archive_cmds_need_lc, $1)=no
- ;;
- freebsd* | dragonfly*)
- # FreeBSD 3 and later use GNU C++ and GNU ld with standard ELF
- # conventions
- _LT_AC_TAGVAR(ld_shlibs, $1)=yes
- ;;
- gnu*)
- ;;
- hpux9*)
- _LT_AC_TAGVAR(hardcode_libdir_flag_spec, $1)='${wl}+b ${wl}$libdir'
- _LT_AC_TAGVAR(hardcode_libdir_separator, $1)=:
- _LT_AC_TAGVAR(export_dynamic_flag_spec, $1)='${wl}-E'
- _LT_AC_TAGVAR(hardcode_direct, $1)=yes
- _LT_AC_TAGVAR(hardcode_minus_L, $1)=yes # Not in the search PATH,
- # but as the default
- # location of the library.
-
- case $cc_basename in
- CC*)
- # FIXME: insert proper C++ library support
- _LT_AC_TAGVAR(ld_shlibs, $1)=no
- ;;
- aCC*)
- _LT_AC_TAGVAR(archive_cmds, $1)='$rm $output_objdir/$soname~$CC -b ${wl}+b ${wl}$install_libdir -o $output_objdir/$soname $predep_objects $libobjs $deplibs $postdep_objects $compiler_flags~test $output_objdir/$soname = $lib || mv $output_objdir/$soname $lib'
- # Commands to make compiler produce verbose output that lists
- # what "hidden" libraries, object files and flags are used when
- # linking a shared library.
- #
- # There doesn't appear to be a way to prevent this compiler from
- # explicitly linking system object files so we need to strip them
- # from the output so that they don't get included in the library
- # dependencies.
- output_verbose_link_cmd='templist=`($CC -b $CFLAGS -v conftest.$objext 2>&1) | grep "[[-]]L"`; list=""; for z in $templist; do case $z in conftest.$objext) list="$list $z";; *.$objext);; *) list="$list $z";;esac; done; echo $list'
- ;;
- *)
- if test "$GXX" = yes; then
- _LT_AC_TAGVAR(archive_cmds, $1)='$rm $output_objdir/$soname~$CC -shared -nostdlib -fPIC ${wl}+b ${wl}$install_libdir -o $output_objdir/$soname $predep_objects $libobjs $deplibs $postdep_objects $compiler_flags~test $output_objdir/$soname = $lib || mv $output_objdir/$soname $lib'
- else
- # FIXME: insert proper C++ library support
- _LT_AC_TAGVAR(ld_shlibs, $1)=no
- fi
- ;;
- esac
- ;;
- hpux10*|hpux11*)
- if test $with_gnu_ld = no; then
- _LT_AC_TAGVAR(hardcode_libdir_flag_spec, $1)='${wl}+b ${wl}$libdir'
- _LT_AC_TAGVAR(hardcode_libdir_separator, $1)=:
-
- case $host_cpu in
- hppa*64*|ia64*) ;;
- *)
- _LT_AC_TAGVAR(export_dynamic_flag_spec, $1)='${wl}-E'
- ;;
- esac
- fi
- case $host_cpu in
- hppa*64*|ia64*)
- _LT_AC_TAGVAR(hardcode_direct, $1)=no
- _LT_AC_TAGVAR(hardcode_shlibpath_var, $1)=no
- ;;
- *)
- _LT_AC_TAGVAR(hardcode_direct, $1)=yes
- _LT_AC_TAGVAR(hardcode_minus_L, $1)=yes # Not in the search PATH,
- # but as the default
- # location of the library.
- ;;
- esac
-
- case $cc_basename in
- CC*)
- # FIXME: insert proper C++ library support
- _LT_AC_TAGVAR(ld_shlibs, $1)=no
- ;;
- aCC*)
- case $host_cpu in
- hppa*64*)
- _LT_AC_TAGVAR(archive_cmds, $1)='$CC -b ${wl}+h ${wl}$soname -o $lib $predep_objects $libobjs $deplibs $postdep_objects $compiler_flags'
- ;;
- ia64*)
- _LT_AC_TAGVAR(archive_cmds, $1)='$CC -b ${wl}+h ${wl}$soname ${wl}+nodefaultrpath -o $lib $predep_objects $libobjs $deplibs $postdep_objects $compiler_flags'
- ;;
- *)
- _LT_AC_TAGVAR(archive_cmds, $1)='$CC -b ${wl}+h ${wl}$soname ${wl}+b ${wl}$install_libdir -o $lib $predep_objects $libobjs $deplibs $postdep_objects $compiler_flags'
- ;;
- esac
- # Commands to make compiler produce verbose output that lists
- # what "hidden" libraries, object files and flags are used when
- # linking a shared library.
- #
- # There doesn't appear to be a way to prevent this compiler from
- # explicitly linking system object files so we need to strip them
- # from the output so that they don't get included in the library
- # dependencies.
- output_verbose_link_cmd='templist=`($CC -b $CFLAGS -v conftest.$objext 2>&1) | grep "\-L"`; list=""; for z in $templist; do case $z in conftest.$objext) list="$list $z";; *.$objext);; *) list="$list $z";;esac; done; echo $list'
- ;;
- *)
- if test "$GXX" = yes; then
- if test $with_gnu_ld = no; then
- case $host_cpu in
- hppa*64*)
- _LT_AC_TAGVAR(archive_cmds, $1)='$CC -shared -nostdlib -fPIC ${wl}+h ${wl}$soname -o $lib $predep_objects $libobjs $deplibs $postdep_objects $compiler_flags'
- ;;
- ia64*)
- _LT_AC_TAGVAR(archive_cmds, $1)='$CC -shared -nostdlib -fPIC ${wl}+h ${wl}$soname ${wl}+nodefaultrpath -o $lib $predep_objects $libobjs $deplibs $postdep_objects $compiler_flags'
- ;;
- *)
- _LT_AC_TAGVAR(archive_cmds, $1)='$CC -shared -nostdlib -fPIC ${wl}+h ${wl}$soname ${wl}+b ${wl}$install_libdir -o $lib $predep_objects $libobjs $deplibs $postdep_objects $compiler_flags'
- ;;
- esac
- fi
- else
- # FIXME: insert proper C++ library support
- _LT_AC_TAGVAR(ld_shlibs, $1)=no
- fi
- ;;
- esac
- ;;
- interix[[3-9]]*)
- _LT_AC_TAGVAR(hardcode_direct, $1)=no
- _LT_AC_TAGVAR(hardcode_shlibpath_var, $1)=no
- _LT_AC_TAGVAR(hardcode_libdir_flag_spec, $1)='${wl}-rpath,$libdir'
- _LT_AC_TAGVAR(export_dynamic_flag_spec, $1)='${wl}-E'
- # Hack: On Interix 3.x, we cannot compile PIC because of a broken gcc.
- # Instead, shared libraries are loaded at an image base (0x10000000 by
- # default) and relocated if they conflict, which is a slow very memory
- # consuming and fragmenting process. To avoid this, we pick a random,
- # 256 KiB-aligned image base between 0x50000000 and 0x6FFC0000 at link
- # time. Moving up from 0x10000000 also allows more sbrk(2) space.
- _LT_AC_TAGVAR(archive_cmds, $1)='$CC -shared $pic_flag $libobjs $deplibs $compiler_flags ${wl}-h,$soname ${wl}--image-base,`expr ${RANDOM-$$} % 4096 / 2 \* 262144 + 1342177280` -o $lib'
- _LT_AC_TAGVAR(archive_expsym_cmds, $1)='sed "s,^,_," $export_symbols >$output_objdir/$soname.expsym~$CC -shared $pic_flag $libobjs $deplibs $compiler_flags ${wl}-h,$soname ${wl}--retain-symbols-file,$output_objdir/$soname.expsym ${wl}--image-base,`expr ${RANDOM-$$} % 4096 / 2 \* 262144 + 1342177280` -o $lib'
- ;;
- irix5* | irix6*)
- case $cc_basename in
- CC*)
- # SGI C++
- _LT_AC_TAGVAR(archive_cmds, $1)='$CC -shared -all -multigot $predep_objects $libobjs $deplibs $postdep_objects $compiler_flags -soname $soname `test -n "$verstring" && echo -set_version $verstring` -update_registry ${output_objdir}/so_locations -o $lib'
-
- # Archives containing C++ object files must be created using
- # "CC -ar", where "CC" is the IRIX C++ compiler. This is
- # necessary to make sure instantiated templates are included
- # in the archive.
- _LT_AC_TAGVAR(old_archive_cmds, $1)='$CC -ar -WR,-u -o $oldlib $oldobjs'
- ;;
- *)
- if test "$GXX" = yes; then
- if test "$with_gnu_ld" = no; then
- _LT_AC_TAGVAR(archive_cmds, $1)='$CC -shared -nostdlib $predep_objects $libobjs $deplibs $postdep_objects $compiler_flags ${wl}-soname ${wl}$soname `test -n "$verstring" && echo ${wl}-set_version ${wl}$verstring` ${wl}-update_registry ${wl}${output_objdir}/so_locations -o $lib'
- else
- _LT_AC_TAGVAR(archive_cmds, $1)='$CC -shared -nostdlib $predep_objects $libobjs $deplibs $postdep_objects $compiler_flags ${wl}-soname ${wl}$soname `test -n "$verstring" && echo ${wl}-set_version ${wl}$verstring` -o $lib'
- fi
- fi
- _LT_AC_TAGVAR(link_all_deplibs, $1)=yes
- ;;
- esac
- _LT_AC_TAGVAR(hardcode_libdir_flag_spec, $1)='${wl}-rpath ${wl}$libdir'
- _LT_AC_TAGVAR(hardcode_libdir_separator, $1)=:
- ;;
- linux* | k*bsd*-gnu)
- case $cc_basename in
- KCC*)
- # Kuck and Associates, Inc. (KAI) C++ Compiler
-
- # KCC will only create a shared library if the output file
- # ends with ".so" (or ".sl" for HP-UX), so rename the library
- # to its proper name (with version) after linking.
- _LT_AC_TAGVAR(archive_cmds, $1)='tempext=`echo $shared_ext | $SED -e '\''s/\([[^()0-9A-Za-z{}]]\)/\\\\\1/g'\''`; templib=`echo $lib | $SED -e "s/\${tempext}\..*/.so/"`; $CC $predep_objects $libobjs $deplibs $postdep_objects $compiler_flags --soname $soname -o \$templib; mv \$templib $lib'
- _LT_AC_TAGVAR(archive_expsym_cmds, $1)='tempext=`echo $shared_ext | $SED -e '\''s/\([[^()0-9A-Za-z{}]]\)/\\\\\1/g'\''`; templib=`echo $lib | $SED -e "s/\${tempext}\..*/.so/"`; $CC $predep_objects $libobjs $deplibs $postdep_objects $compiler_flags --soname $soname -o \$templib ${wl}-retain-symbols-file,$export_symbols; mv \$templib $lib'
- # Commands to make compiler produce verbose output that lists
- # what "hidden" libraries, object files and flags are used when
- # linking a shared library.
- #
- # There doesn't appear to be a way to prevent this compiler from
- # explicitly linking system object files so we need to strip them
- # from the output so that they don't get included in the library
- # dependencies.
- output_verbose_link_cmd='templist=`$CC $CFLAGS -v conftest.$objext -o libconftest$shared_ext 2>&1 | grep "ld"`; rm -f libconftest$shared_ext; list=""; for z in $templist; do case $z in conftest.$objext) list="$list $z";; *.$objext);; *) list="$list $z";;esac; done; echo $list'
-
- _LT_AC_TAGVAR(hardcode_libdir_flag_spec, $1)='${wl}--rpath,$libdir'
- _LT_AC_TAGVAR(export_dynamic_flag_spec, $1)='${wl}--export-dynamic'
-
- # Archives containing C++ object files must be created using
- # "CC -Bstatic", where "CC" is the KAI C++ compiler.
- _LT_AC_TAGVAR(old_archive_cmds, $1)='$CC -Bstatic -o $oldlib $oldobjs'
- ;;
- icpc*)
- # Intel C++
- with_gnu_ld=yes
- # version 8.0 and above of icpc choke on multiply defined symbols
- # if we add $predep_objects and $postdep_objects, however 7.1 and
- # earlier do not add the objects themselves.
- case `$CC -V 2>&1` in
- *"Version 7."*)
- _LT_AC_TAGVAR(archive_cmds, $1)='$CC -shared $predep_objects $libobjs $deplibs $postdep_objects $compiler_flags ${wl}-soname $wl$soname -o $lib'
- _LT_AC_TAGVAR(archive_expsym_cmds, $1)='$CC -shared $predep_objects $libobjs $deplibs $postdep_objects $compiler_flags ${wl}-soname $wl$soname ${wl}-retain-symbols-file $wl$export_symbols -o $lib'
- ;;
- *) # Version 8.0 or newer
- tmp_idyn=
- case $host_cpu in
- ia64*) tmp_idyn=' -i_dynamic';;
- esac
- _LT_AC_TAGVAR(archive_cmds, $1)='$CC -shared'"$tmp_idyn"' $libobjs $deplibs $compiler_flags ${wl}-soname $wl$soname -o $lib'
- _LT_AC_TAGVAR(archive_expsym_cmds, $1)='$CC -shared'"$tmp_idyn"' $libobjs $deplibs $compiler_flags ${wl}-soname $wl$soname ${wl}-retain-symbols-file $wl$export_symbols -o $lib'
- ;;
- esac
- _LT_AC_TAGVAR(archive_cmds_need_lc, $1)=no
- _LT_AC_TAGVAR(hardcode_libdir_flag_spec, $1)='${wl}-rpath,$libdir'
- _LT_AC_TAGVAR(export_dynamic_flag_spec, $1)='${wl}--export-dynamic'
- _LT_AC_TAGVAR(whole_archive_flag_spec, $1)='${wl}--whole-archive$convenience ${wl}--no-whole-archive'
- ;;
- pgCC* | pgcpp*)
- # Portland Group C++ compiler
- _LT_AC_TAGVAR(archive_cmds, $1)='$CC -shared $pic_flag $predep_objects $libobjs $deplibs $postdep_objects $compiler_flags ${wl}-soname ${wl}$soname -o $lib'
- _LT_AC_TAGVAR(archive_expsym_cmds, $1)='$CC -shared $pic_flag $predep_objects $libobjs $deplibs $postdep_objects $compiler_flags ${wl}-soname ${wl}$soname ${wl}-retain-symbols-file ${wl}$export_symbols -o $lib'
-
- _LT_AC_TAGVAR(hardcode_libdir_flag_spec, $1)='${wl}--rpath ${wl}$libdir'
- _LT_AC_TAGVAR(export_dynamic_flag_spec, $1)='${wl}--export-dynamic'
- _LT_AC_TAGVAR(whole_archive_flag_spec, $1)='${wl}--whole-archive`for conv in $convenience\"\"; do test -n \"$conv\" && new_convenience=\"$new_convenience,$conv\"; done; $echo \"$new_convenience\"` ${wl}--no-whole-archive'
- ;;
- cxx*)
- # Compaq C++
- _LT_AC_TAGVAR(archive_cmds, $1)='$CC -shared $predep_objects $libobjs $deplibs $postdep_objects $compiler_flags ${wl}-soname $wl$soname -o $lib'
- _LT_AC_TAGVAR(archive_expsym_cmds, $1)='$CC -shared $predep_objects $libobjs $deplibs $postdep_objects $compiler_flags ${wl}-soname $wl$soname -o $lib ${wl}-retain-symbols-file $wl$export_symbols'
-
- runpath_var=LD_RUN_PATH
- _LT_AC_TAGVAR(hardcode_libdir_flag_spec, $1)='-rpath $libdir'
- _LT_AC_TAGVAR(hardcode_libdir_separator, $1)=:
-
- # Commands to make compiler produce verbose output that lists
- # what "hidden" libraries, object files and flags are used when
- # linking a shared library.
- #
- # There doesn't appear to be a way to prevent this compiler from
- # explicitly linking system object files so we need to strip them
- # from the output so that they don't get included in the library
- # dependencies.
- output_verbose_link_cmd='templist=`$CC -shared $CFLAGS -v conftest.$objext 2>&1 | grep "ld"`; templist=`echo $templist | $SED "s/\(^.*ld.*\)\( .*ld .*$\)/\1/"`; list=""; for z in $templist; do case $z in conftest.$objext) list="$list $z";; *.$objext);; *) list="$list $z";;esac; done; echo $list'
- ;;
- *)
- case `$CC -V 2>&1 | sed 5q` in
- *Sun\ C*)
- # Sun C++ 5.9
- _LT_AC_TAGVAR(no_undefined_flag, $1)=' -zdefs'
- _LT_AC_TAGVAR(archive_cmds, $1)='$CC -G${allow_undefined_flag} -h$soname -o $lib $predep_objects $libobjs $deplibs $postdep_objects $compiler_flags'
- _LT_AC_TAGVAR(archive_expsym_cmds, $1)='$CC -G${allow_undefined_flag} -h$soname -o $lib $predep_objects $libobjs $deplibs $postdep_objects $compiler_flags ${wl}-retain-symbols-file ${wl}$export_symbols'
- _LT_AC_TAGVAR(hardcode_libdir_flag_spec, $1)='-R$libdir'
- _LT_AC_TAGVAR(whole_archive_flag_spec, $1)='${wl}--whole-archive`new_convenience=; for conv in $convenience\"\"; do test -z \"$conv\" || new_convenience=\"$new_convenience,$conv\"; done; $echo \"$new_convenience\"` ${wl}--no-whole-archive'
-
- # Not sure whether something based on
- # $CC $CFLAGS -v conftest.$objext -o libconftest$shared_ext 2>&1
- # would be better.
- output_verbose_link_cmd='echo'
-
- # Archives containing C++ object files must be created using
- # "CC -xar", where "CC" is the Sun C++ compiler. This is
- # necessary to make sure instantiated templates are included
- # in the archive.
- _LT_AC_TAGVAR(old_archive_cmds, $1)='$CC -xar -o $oldlib $oldobjs'
- ;;
- esac
- ;;
- esac
- ;;
- lynxos*)
- # FIXME: insert proper C++ library support
- _LT_AC_TAGVAR(ld_shlibs, $1)=no
- ;;
- m88k*)
- # FIXME: insert proper C++ library support
- _LT_AC_TAGVAR(ld_shlibs, $1)=no
- ;;
- mvs*)
- case $cc_basename in
- cxx*)
- # FIXME: insert proper C++ library support
- _LT_AC_TAGVAR(ld_shlibs, $1)=no
- ;;
- *)
- # FIXME: insert proper C++ library support
- _LT_AC_TAGVAR(ld_shlibs, $1)=no
- ;;
- esac
- ;;
- netbsd*)
- if echo __ELF__ | $CC -E - | grep __ELF__ >/dev/null; then
- _LT_AC_TAGVAR(archive_cmds, $1)='$LD -Bshareable -o $lib $predep_objects $libobjs $deplibs $postdep_objects $linker_flags'
- wlarc=
- _LT_AC_TAGVAR(hardcode_libdir_flag_spec, $1)='-R$libdir'
- _LT_AC_TAGVAR(hardcode_direct, $1)=yes
- _LT_AC_TAGVAR(hardcode_shlibpath_var, $1)=no
- fi
- # Workaround some broken pre-1.5 toolchains
- output_verbose_link_cmd='$CC -shared $CFLAGS -v conftest.$objext 2>&1 | grep conftest.$objext | $SED -e "s:-lgcc -lc -lgcc::"'
- ;;
- openbsd2*)
- # C++ shared libraries are fairly broken
- _LT_AC_TAGVAR(ld_shlibs, $1)=no
- ;;
- openbsd*)
- if test -f /usr/libexec/ld.so; then
- _LT_AC_TAGVAR(hardcode_direct, $1)=yes
- _LT_AC_TAGVAR(hardcode_shlibpath_var, $1)=no
- _LT_AC_TAGVAR(archive_cmds, $1)='$CC -shared $pic_flag $predep_objects $libobjs $deplibs $postdep_objects $compiler_flags -o $lib'
- _LT_AC_TAGVAR(hardcode_libdir_flag_spec, $1)='${wl}-rpath,$libdir'
- if test -z "`echo __ELF__ | $CC -E - | grep __ELF__`" || test "$host_os-$host_cpu" = "openbsd2.8-powerpc"; then
- _LT_AC_TAGVAR(archive_expsym_cmds, $1)='$CC -shared $pic_flag $predep_objects $libobjs $deplibs $postdep_objects $compiler_flags ${wl}-retain-symbols-file,$export_symbols -o $lib'
- _LT_AC_TAGVAR(export_dynamic_flag_spec, $1)='${wl}-E'
- _LT_AC_TAGVAR(whole_archive_flag_spec, $1)="$wlarc"'--whole-archive$convenience '"$wlarc"'--no-whole-archive'
- fi
- output_verbose_link_cmd='echo'
- else
- _LT_AC_TAGVAR(ld_shlibs, $1)=no
- fi
- ;;
- osf3*)
- case $cc_basename in
- KCC*)
- # Kuck and Associates, Inc. (KAI) C++ Compiler
-
- # KCC will only create a shared library if the output file
- # ends with ".so" (or ".sl" for HP-UX), so rename the library
- # to its proper name (with version) after linking.
- _LT_AC_TAGVAR(archive_cmds, $1)='tempext=`echo $shared_ext | $SED -e '\''s/\([[^()0-9A-Za-z{}]]\)/\\\\\1/g'\''`; templib=`echo $lib | $SED -e "s/\${tempext}\..*/.so/"`; $CC $predep_objects $libobjs $deplibs $postdep_objects $compiler_flags --soname $soname -o \$templib; mv \$templib $lib'
-
- _LT_AC_TAGVAR(hardcode_libdir_flag_spec, $1)='${wl}-rpath,$libdir'
- _LT_AC_TAGVAR(hardcode_libdir_separator, $1)=:
-
- # Archives containing C++ object files must be created using
- # "CC -Bstatic", where "CC" is the KAI C++ compiler.
- _LT_AC_TAGVAR(old_archive_cmds, $1)='$CC -Bstatic -o $oldlib $oldobjs'
-
- ;;
- RCC*)
- # Rational C++ 2.4.1
- # FIXME: insert proper C++ library support
- _LT_AC_TAGVAR(ld_shlibs, $1)=no
- ;;
- cxx*)
- _LT_AC_TAGVAR(allow_undefined_flag, $1)=' ${wl}-expect_unresolved ${wl}\*'
- _LT_AC_TAGVAR(archive_cmds, $1)='$CC -shared${allow_undefined_flag} $predep_objects $libobjs $deplibs $postdep_objects $compiler_flags ${wl}-soname $soname `test -n "$verstring" && echo ${wl}-set_version $verstring` -update_registry ${output_objdir}/so_locations -o $lib'
-
- _LT_AC_TAGVAR(hardcode_libdir_flag_spec, $1)='${wl}-rpath ${wl}$libdir'
- _LT_AC_TAGVAR(hardcode_libdir_separator, $1)=:
-
- # Commands to make compiler produce verbose output that lists
- # what "hidden" libraries, object files and flags are used when
- # linking a shared library.
- #
- # There doesn't appear to be a way to prevent this compiler from
- # explicitly linking system object files so we need to strip them
- # from the output so that they don't get included in the library
- # dependencies.
- output_verbose_link_cmd='templist=`$CC -shared $CFLAGS -v conftest.$objext 2>&1 | grep "ld" | grep -v "ld:"`; templist=`echo $templist | $SED "s/\(^.*ld.*\)\( .*ld.*$\)/\1/"`; list=""; for z in $templist; do case $z in conftest.$objext) list="$list $z";; *.$objext);; *) list="$list $z";;esac; done; echo $list'
- ;;
- *)
- if test "$GXX" = yes && test "$with_gnu_ld" = no; then
- _LT_AC_TAGVAR(allow_undefined_flag, $1)=' ${wl}-expect_unresolved ${wl}\*'
- _LT_AC_TAGVAR(archive_cmds, $1)='$CC -shared -nostdlib ${allow_undefined_flag} $predep_objects $libobjs $deplibs $postdep_objects $compiler_flags ${wl}-soname ${wl}$soname `test -n "$verstring" && echo ${wl}-set_version ${wl}$verstring` ${wl}-update_registry ${wl}${output_objdir}/so_locations -o $lib'
-
- _LT_AC_TAGVAR(hardcode_libdir_flag_spec, $1)='${wl}-rpath ${wl}$libdir'
- _LT_AC_TAGVAR(hardcode_libdir_separator, $1)=:
-
- # Commands to make compiler produce verbose output that lists
- # what "hidden" libraries, object files and flags are used when
- # linking a shared library.
- output_verbose_link_cmd='$CC -shared $CFLAGS -v conftest.$objext 2>&1 | grep "\-L"'
-
- else
- # FIXME: insert proper C++ library support
- _LT_AC_TAGVAR(ld_shlibs, $1)=no
- fi
- ;;
- esac
- ;;
- osf4* | osf5*)
- case $cc_basename in
- KCC*)
- # Kuck and Associates, Inc. (KAI) C++ Compiler
-
- # KCC will only create a shared library if the output file
- # ends with ".so" (or ".sl" for HP-UX), so rename the library
- # to its proper name (with version) after linking.
- _LT_AC_TAGVAR(archive_cmds, $1)='tempext=`echo $shared_ext | $SED -e '\''s/\([[^()0-9A-Za-z{}]]\)/\\\\\1/g'\''`; templib=`echo $lib | $SED -e "s/\${tempext}\..*/.so/"`; $CC $predep_objects $libobjs $deplibs $postdep_objects $compiler_flags --soname $soname -o \$templib; mv \$templib $lib'
-
- _LT_AC_TAGVAR(hardcode_libdir_flag_spec, $1)='${wl}-rpath,$libdir'
- _LT_AC_TAGVAR(hardcode_libdir_separator, $1)=:
-
- # Archives containing C++ object files must be created using
- # the KAI C++ compiler.
- _LT_AC_TAGVAR(old_archive_cmds, $1)='$CC -o $oldlib $oldobjs'
- ;;
- RCC*)
- # Rational C++ 2.4.1
- # FIXME: insert proper C++ library support
- _LT_AC_TAGVAR(ld_shlibs, $1)=no
- ;;
- cxx*)
- _LT_AC_TAGVAR(allow_undefined_flag, $1)=' -expect_unresolved \*'
- _LT_AC_TAGVAR(archive_cmds, $1)='$CC -shared${allow_undefined_flag} $predep_objects $libobjs $deplibs $postdep_objects $compiler_flags -msym -soname $soname `test -n "$verstring" && echo -set_version $verstring` -update_registry ${output_objdir}/so_locations -o $lib'
- _LT_AC_TAGVAR(archive_expsym_cmds, $1)='for i in `cat $export_symbols`; do printf "%s %s\\n" -exported_symbol "\$i" >> $lib.exp; done~
- echo "-hidden">> $lib.exp~
- $CC -shared$allow_undefined_flag $predep_objects $libobjs $deplibs $postdep_objects $compiler_flags -msym -soname $soname -Wl,-input -Wl,$lib.exp `test -n "$verstring" && echo -set_version $verstring` -update_registry ${output_objdir}/so_locations -o $lib~
- $rm $lib.exp'
-
- _LT_AC_TAGVAR(hardcode_libdir_flag_spec, $1)='-rpath $libdir'
- _LT_AC_TAGVAR(hardcode_libdir_separator, $1)=:
-
- # Commands to make compiler produce verbose output that lists
- # what "hidden" libraries, object files and flags are used when
- # linking a shared library.
- #
- # There doesn't appear to be a way to prevent this compiler from
- # explicitly linking system object files so we need to strip them
- # from the output so that they don't get included in the library
- # dependencies.
- output_verbose_link_cmd='templist=`$CC -shared $CFLAGS -v conftest.$objext 2>&1 | grep "ld" | grep -v "ld:"`; templist=`echo $templist | $SED "s/\(^.*ld.*\)\( .*ld.*$\)/\1/"`; list=""; for z in $templist; do case $z in conftest.$objext) list="$list $z";; *.$objext);; *) list="$list $z";;esac; done; echo $list'
- ;;
- *)
- if test "$GXX" = yes && test "$with_gnu_ld" = no; then
- _LT_AC_TAGVAR(allow_undefined_flag, $1)=' ${wl}-expect_unresolved ${wl}\*'
- _LT_AC_TAGVAR(archive_cmds, $1)='$CC -shared -nostdlib ${allow_undefined_flag} $predep_objects $libobjs $deplibs $postdep_objects $compiler_flags ${wl}-msym ${wl}-soname ${wl}$soname `test -n "$verstring" && echo ${wl}-set_version ${wl}$verstring` ${wl}-update_registry ${wl}${output_objdir}/so_locations -o $lib'
-
- _LT_AC_TAGVAR(hardcode_libdir_flag_spec, $1)='${wl}-rpath ${wl}$libdir'
- _LT_AC_TAGVAR(hardcode_libdir_separator, $1)=:
-
- # Commands to make compiler produce verbose output that lists
- # what "hidden" libraries, object files and flags are used when
- # linking a shared library.
- output_verbose_link_cmd='$CC -shared $CFLAGS -v conftest.$objext 2>&1 | grep "\-L"'
-
- else
- # FIXME: insert proper C++ library support
- _LT_AC_TAGVAR(ld_shlibs, $1)=no
- fi
- ;;
- esac
- ;;
- psos*)
- # FIXME: insert proper C++ library support
- _LT_AC_TAGVAR(ld_shlibs, $1)=no
- ;;
- sunos4*)
- case $cc_basename in
- CC*)
- # Sun C++ 4.x
- # FIXME: insert proper C++ library support
- _LT_AC_TAGVAR(ld_shlibs, $1)=no
- ;;
- lcc*)
- # Lucid
- # FIXME: insert proper C++ library support
- _LT_AC_TAGVAR(ld_shlibs, $1)=no
- ;;
- *)
- # FIXME: insert proper C++ library support
- _LT_AC_TAGVAR(ld_shlibs, $1)=no
- ;;
- esac
- ;;
- solaris*)
- case $cc_basename in
- CC*)
- # Sun C++ 4.2, 5.x and Centerline C++
- _LT_AC_TAGVAR(archive_cmds_need_lc,$1)=yes
- _LT_AC_TAGVAR(no_undefined_flag, $1)=' -zdefs'
- _LT_AC_TAGVAR(archive_cmds, $1)='$CC -G${allow_undefined_flag} -h$soname -o $lib $predep_objects $libobjs $deplibs $postdep_objects $compiler_flags'
- _LT_AC_TAGVAR(archive_expsym_cmds, $1)='$echo "{ global:" > $lib.exp~cat $export_symbols | $SED -e "s/\(.*\)/\1;/" >> $lib.exp~$echo "local: *; };" >> $lib.exp~
- $CC -G${allow_undefined_flag} ${wl}-M ${wl}$lib.exp -h$soname -o $lib $predep_objects $libobjs $deplibs $postdep_objects $compiler_flags~$rm $lib.exp'
-
- _LT_AC_TAGVAR(hardcode_libdir_flag_spec, $1)='-R$libdir'
- _LT_AC_TAGVAR(hardcode_shlibpath_var, $1)=no
- case $host_os in
- solaris2.[[0-5]] | solaris2.[[0-5]].*) ;;
- *)
- # The compiler driver will combine and reorder linker options,
- # but understands `-z linker_flag'.
- # Supported since Solaris 2.6 (maybe 2.5.1?)
- _LT_AC_TAGVAR(whole_archive_flag_spec, $1)='-z allextract$convenience -z defaultextract'
- ;;
- esac
- _LT_AC_TAGVAR(link_all_deplibs, $1)=yes
-
- output_verbose_link_cmd='echo'
-
- # Archives containing C++ object files must be created using
- # "CC -xar", where "CC" is the Sun C++ compiler. This is
- # necessary to make sure instantiated templates are included
- # in the archive.
- _LT_AC_TAGVAR(old_archive_cmds, $1)='$CC -xar -o $oldlib $oldobjs'
- ;;
- gcx*)
- # Green Hills C++ Compiler
- _LT_AC_TAGVAR(archive_cmds, $1)='$CC -shared $predep_objects $libobjs $deplibs $postdep_objects $compiler_flags ${wl}-h $wl$soname -o $lib'
-
- # The C++ compiler must be used to create the archive.
- _LT_AC_TAGVAR(old_archive_cmds, $1)='$CC $LDFLAGS -archive -o $oldlib $oldobjs'
- ;;
- *)
- # GNU C++ compiler with Solaris linker
- if test "$GXX" = yes && test "$with_gnu_ld" = no; then
- _LT_AC_TAGVAR(no_undefined_flag, $1)=' ${wl}-z ${wl}defs'
- if $CC --version | grep -v '^2\.7' > /dev/null; then
- _LT_AC_TAGVAR(archive_cmds, $1)='$CC -shared -nostdlib $LDFLAGS $predep_objects $libobjs $deplibs $postdep_objects $compiler_flags ${wl}-h $wl$soname -o $lib'
- _LT_AC_TAGVAR(archive_expsym_cmds, $1)='$echo "{ global:" > $lib.exp~cat $export_symbols | $SED -e "s/\(.*\)/\1;/" >> $lib.exp~$echo "local: *; };" >> $lib.exp~
- $CC -shared -nostdlib ${wl}-M $wl$lib.exp -o $lib $predep_objects $libobjs $deplibs $postdep_objects $compiler_flags~$rm $lib.exp'
-
- # Commands to make compiler produce verbose output that lists
- # what "hidden" libraries, object files and flags are used when
- # linking a shared library.
- output_verbose_link_cmd="$CC -shared $CFLAGS -v conftest.$objext 2>&1 | grep \"\-L\""
- else
- # g++ 2.7 appears to require `-G' NOT `-shared' on this
- # platform.
- _LT_AC_TAGVAR(archive_cmds, $1)='$CC -G -nostdlib $LDFLAGS $predep_objects $libobjs $deplibs $postdep_objects $compiler_flags ${wl}-h $wl$soname -o $lib'
- _LT_AC_TAGVAR(archive_expsym_cmds, $1)='$echo "{ global:" > $lib.exp~cat $export_symbols | $SED -e "s/\(.*\)/\1;/" >> $lib.exp~$echo "local: *; };" >> $lib.exp~
- $CC -G -nostdlib ${wl}-M $wl$lib.exp -o $lib $predep_objects $libobjs $deplibs $postdep_objects $compiler_flags~$rm $lib.exp'
-
- # Commands to make compiler produce verbose output that lists
- # what "hidden" libraries, object files and flags are used when
- # linking a shared library.
- output_verbose_link_cmd="$CC -G $CFLAGS -v conftest.$objext 2>&1 | grep \"\-L\""
- fi
-
- _LT_AC_TAGVAR(hardcode_libdir_flag_spec, $1)='${wl}-R $wl$libdir'
- case $host_os in
- solaris2.[[0-5]] | solaris2.[[0-5]].*) ;;
- *)
- _LT_AC_TAGVAR(whole_archive_flag_spec, $1)='${wl}-z ${wl}allextract$convenience ${wl}-z ${wl}defaultextract'
- ;;
- esac
- fi
- ;;
- esac
- ;;
- sysv4*uw2* | sysv5OpenUNIX* | sysv5UnixWare7.[[01]].[[10]]* | unixware7* | sco3.2v5.0.[[024]]*)
- _LT_AC_TAGVAR(no_undefined_flag, $1)='${wl}-z,text'
- _LT_AC_TAGVAR(archive_cmds_need_lc, $1)=no
- _LT_AC_TAGVAR(hardcode_shlibpath_var, $1)=no
- runpath_var='LD_RUN_PATH'
-
- case $cc_basename in
- CC*)
- _LT_AC_TAGVAR(archive_cmds, $1)='$CC -G ${wl}-h,$soname -o $lib $libobjs $deplibs $compiler_flags'
- _LT_AC_TAGVAR(archive_expsym_cmds, $1)='$CC -G ${wl}-Bexport:$export_symbols ${wl}-h,$soname -o $lib $libobjs $deplibs $compiler_flags'
- ;;
- *)
- _LT_AC_TAGVAR(archive_cmds, $1)='$CC -shared ${wl}-h,$soname -o $lib $libobjs $deplibs $compiler_flags'
- _LT_AC_TAGVAR(archive_expsym_cmds, $1)='$CC -shared ${wl}-Bexport:$export_symbols ${wl}-h,$soname -o $lib $libobjs $deplibs $compiler_flags'
- ;;
- esac
- ;;
- sysv5* | sco3.2v5* | sco5v6*)
- # Note: We can NOT use -z defs as we might desire, because we do not
- # link with -lc, and that would cause any symbols used from libc to
- # always be unresolved, which means just about no library would
- # ever link correctly. If we're not using GNU ld we use -z text
- # though, which does catch some bad symbols but isn't as heavy-handed
- # as -z defs.
- # For security reasons, it is highly recommended that you always
- # use absolute paths for naming shared libraries, and exclude the
- # DT_RUNPATH tag from executables and libraries. But doing so
- # requires that you compile everything twice, which is a pain.
- # So that behaviour is only enabled if SCOABSPATH is set to a
- # non-empty value in the environment. Most likely only useful for
- # creating official distributions of packages.
- # This is a hack until libtool officially supports absolute path
- # names for shared libraries.
- _LT_AC_TAGVAR(no_undefined_flag, $1)='${wl}-z,text'
- _LT_AC_TAGVAR(allow_undefined_flag, $1)='${wl}-z,nodefs'
- _LT_AC_TAGVAR(archive_cmds_need_lc, $1)=no
- _LT_AC_TAGVAR(hardcode_shlibpath_var, $1)=no
- _LT_AC_TAGVAR(hardcode_libdir_flag_spec, $1)='`test -z "$SCOABSPATH" && echo ${wl}-R,$libdir`'
- _LT_AC_TAGVAR(hardcode_libdir_separator, $1)=':'
- _LT_AC_TAGVAR(link_all_deplibs, $1)=yes
- _LT_AC_TAGVAR(export_dynamic_flag_spec, $1)='${wl}-Bexport'
- runpath_var='LD_RUN_PATH'
-
- case $cc_basename in
- CC*)
- _LT_AC_TAGVAR(archive_cmds, $1)='$CC -G ${wl}-h,\${SCOABSPATH:+${install_libdir}/}$soname -o $lib $libobjs $deplibs $compiler_flags'
- _LT_AC_TAGVAR(archive_expsym_cmds, $1)='$CC -G ${wl}-Bexport:$export_symbols ${wl}-h,\${SCOABSPATH:+${install_libdir}/}$soname -o $lib $libobjs $deplibs $compiler_flags'
- ;;
- *)
- _LT_AC_TAGVAR(archive_cmds, $1)='$CC -shared ${wl}-h,\${SCOABSPATH:+${install_libdir}/}$soname -o $lib $libobjs $deplibs $compiler_flags'
- _LT_AC_TAGVAR(archive_expsym_cmds, $1)='$CC -shared ${wl}-Bexport:$export_symbols ${wl}-h,\${SCOABSPATH:+${install_libdir}/}$soname -o $lib $libobjs $deplibs $compiler_flags'
- ;;
- esac
- ;;
- tandem*)
- case $cc_basename in
- NCC*)
- # NonStop-UX NCC 3.20
- # FIXME: insert proper C++ library support
- _LT_AC_TAGVAR(ld_shlibs, $1)=no
- ;;
- *)
- # FIXME: insert proper C++ library support
- _LT_AC_TAGVAR(ld_shlibs, $1)=no
- ;;
- esac
- ;;
- vxworks*)
- # FIXME: insert proper C++ library support
- _LT_AC_TAGVAR(ld_shlibs, $1)=no
- ;;
- *)
- # FIXME: insert proper C++ library support
- _LT_AC_TAGVAR(ld_shlibs, $1)=no
- ;;
-esac
-AC_MSG_RESULT([$_LT_AC_TAGVAR(ld_shlibs, $1)])
-test "$_LT_AC_TAGVAR(ld_shlibs, $1)" = no && can_build_shared=no
-
-_LT_AC_TAGVAR(GCC, $1)="$GXX"
-_LT_AC_TAGVAR(LD, $1)="$LD"
-
-AC_LIBTOOL_POSTDEP_PREDEP($1)
-AC_LIBTOOL_PROG_COMPILER_PIC($1)
-AC_LIBTOOL_PROG_CC_C_O($1)
-AC_LIBTOOL_SYS_HARD_LINK_LOCKS($1)
-AC_LIBTOOL_PROG_LD_SHLIBS($1)
-AC_LIBTOOL_SYS_DYNAMIC_LINKER($1)
-AC_LIBTOOL_PROG_LD_HARDCODE_LIBPATH($1)
-
-AC_LIBTOOL_CONFIG($1)
-
-AC_LANG_POP
-CC=$lt_save_CC
-LDCXX=$LD
-LD=$lt_save_LD
-GCC=$lt_save_GCC
-with_gnu_ldcxx=$with_gnu_ld
-with_gnu_ld=$lt_save_with_gnu_ld
-lt_cv_path_LDCXX=$lt_cv_path_LD
-lt_cv_path_LD=$lt_save_path_LD
-lt_cv_prog_gnu_ldcxx=$lt_cv_prog_gnu_ld
-lt_cv_prog_gnu_ld=$lt_save_with_gnu_ld
-])# AC_LIBTOOL_LANG_CXX_CONFIG
-
-# AC_LIBTOOL_POSTDEP_PREDEP([TAGNAME])
-# ------------------------------------
-# Figure out "hidden" library dependencies from verbose
-# compiler output when linking a shared library.
-# Parse the compiler output and extract the necessary
-# objects, libraries and library flags.
-AC_DEFUN([AC_LIBTOOL_POSTDEP_PREDEP],
-[AC_REQUIRE([LT_AC_PROG_SED])dnl
-dnl we can't use the lt_simple_compile_test_code here,
-dnl because it contains code intended for an executable,
-dnl not a library. It's possible we should let each
-dnl tag define a new lt_????_link_test_code variable,
-dnl but it's only used here...
-ifelse([$1],[],[cat > conftest.$ac_ext <<EOF
-int a;
-void foo (void) { a = 0; }
-EOF
-],[$1],[CXX],[cat > conftest.$ac_ext <<EOF
-class Foo
-{
-public:
- Foo (void) { a = 0; }
-private:
- int a;
-};
-EOF
-],[$1],[F77],[cat > conftest.$ac_ext <<EOF
- subroutine foo
- implicit none
- integer*4 a
- a=0
- return
- end
-EOF
-],[$1],[GCJ],[cat > conftest.$ac_ext <<EOF
-public class foo {
- private int a;
- public void bar (void) {
- a = 0;
- }
-};
-EOF
-])
-dnl Parse the compiler output and extract the necessary
-dnl objects, libraries and library flags.
-if AC_TRY_EVAL(ac_compile); then
- # Parse the compiler output and extract the necessary
- # objects, libraries and library flags.
-
- # Sentinel used to keep track of whether or not we are before
- # the conftest object file.
- pre_test_object_deps_done=no
-
- # The `*' in the case matches for architectures that use `case' in
- # $output_verbose_cmd can trigger glob expansion during the loop
- # eval without this substitution.
- output_verbose_link_cmd=`$echo "X$output_verbose_link_cmd" | $Xsed -e "$no_glob_subst"`
-
- for p in `eval $output_verbose_link_cmd`; do
- case $p in
-
- -L* | -R* | -l*)
- # Some compilers place space between "-{L,R}" and the path.
- # Remove the space.
- if test $p = "-L" \
- || test $p = "-R"; then
- prev=$p
- continue
- else
- prev=
- fi
-
- if test "$pre_test_object_deps_done" = no; then
- case $p in
- -L* | -R*)
- # Internal compiler library paths should come after those
- # provided the user. The postdeps already come after the
- # user supplied libs so there is no need to process them.
- if test -z "$_LT_AC_TAGVAR(compiler_lib_search_path, $1)"; then
- _LT_AC_TAGVAR(compiler_lib_search_path, $1)="${prev}${p}"
- else
- _LT_AC_TAGVAR(compiler_lib_search_path, $1)="${_LT_AC_TAGVAR(compiler_lib_search_path, $1)} ${prev}${p}"
- fi
- ;;
- # The "-l" case would never come before the object being
- # linked, so don't bother handling this case.
- esac
- else
- if test -z "$_LT_AC_TAGVAR(postdeps, $1)"; then
- _LT_AC_TAGVAR(postdeps, $1)="${prev}${p}"
- else
- _LT_AC_TAGVAR(postdeps, $1)="${_LT_AC_TAGVAR(postdeps, $1)} ${prev}${p}"
- fi
- fi
- ;;
-
- *.$objext)
- # This assumes that the test object file only shows up
- # once in the compiler output.
- if test "$p" = "conftest.$objext"; then
- pre_test_object_deps_done=yes
- continue
- fi
-
- if test "$pre_test_object_deps_done" = no; then
- if test -z "$_LT_AC_TAGVAR(predep_objects, $1)"; then
- _LT_AC_TAGVAR(predep_objects, $1)="$p"
- else
- _LT_AC_TAGVAR(predep_objects, $1)="$_LT_AC_TAGVAR(predep_objects, $1) $p"
- fi
- else
- if test -z "$_LT_AC_TAGVAR(postdep_objects, $1)"; then
- _LT_AC_TAGVAR(postdep_objects, $1)="$p"
- else
- _LT_AC_TAGVAR(postdep_objects, $1)="$_LT_AC_TAGVAR(postdep_objects, $1) $p"
- fi
- fi
- ;;
-
- *) ;; # Ignore the rest.
-
- esac
- done
-
- # Clean up.
- rm -f a.out a.exe
-else
- echo "libtool.m4: error: problem compiling $1 test program"
-fi
-
-$rm -f confest.$objext
-
-_LT_AC_TAGVAR(compiler_lib_search_dirs, $1)=
-if test -n "$_LT_AC_TAGVAR(compiler_lib_search_path, $1)"; then
- _LT_AC_TAGVAR(compiler_lib_search_dirs, $1)=`echo " ${_LT_AC_TAGVAR(compiler_lib_search_path, $1)}" | ${SED} -e 's! -L! !g' -e 's!^ !!'`
-fi
-
-# PORTME: override above test on systems where it is broken
-ifelse([$1],[CXX],
-[case $host_os in
-interix[[3-9]]*)
- # Interix 3.5 installs completely hosed .la files for C++, so rather than
- # hack all around it, let's just trust "g++" to DTRT.
- _LT_AC_TAGVAR(predep_objects,$1)=
- _LT_AC_TAGVAR(postdep_objects,$1)=
- _LT_AC_TAGVAR(postdeps,$1)=
- ;;
-
-linux*)
- case `$CC -V 2>&1 | sed 5q` in
- *Sun\ C*)
- # Sun C++ 5.9
- #
- # The more standards-conforming stlport4 library is
- # incompatible with the Cstd library. Avoid specifying
- # it if it's in CXXFLAGS. Ignore libCrun as
- # -library=stlport4 depends on it.
- case " $CXX $CXXFLAGS " in
- *" -library=stlport4 "*)
- solaris_use_stlport4=yes
- ;;
- esac
- if test "$solaris_use_stlport4" != yes; then
- _LT_AC_TAGVAR(postdeps,$1)='-library=Cstd -library=Crun'
- fi
- ;;
- esac
- ;;
-
-solaris*)
- case $cc_basename in
- CC*)
- # The more standards-conforming stlport4 library is
- # incompatible with the Cstd library. Avoid specifying
- # it if it's in CXXFLAGS. Ignore libCrun as
- # -library=stlport4 depends on it.
- case " $CXX $CXXFLAGS " in
- *" -library=stlport4 "*)
- solaris_use_stlport4=yes
- ;;
- esac
-
- # Adding this requires a known-good setup of shared libraries for
- # Sun compiler versions before 5.6, else PIC objects from an old
- # archive will be linked into the output, leading to subtle bugs.
- if test "$solaris_use_stlport4" != yes; then
- _LT_AC_TAGVAR(postdeps,$1)='-library=Cstd -library=Crun'
- fi
- ;;
- esac
- ;;
-esac
-])
-case " $_LT_AC_TAGVAR(postdeps, $1) " in
-*" -lc "*) _LT_AC_TAGVAR(archive_cmds_need_lc, $1)=no ;;
-esac
-])# AC_LIBTOOL_POSTDEP_PREDEP
-
-# AC_LIBTOOL_LANG_F77_CONFIG
-# --------------------------
-# Ensure that the configuration vars for the C compiler are
-# suitably defined. Those variables are subsequently used by
-# AC_LIBTOOL_CONFIG to write the compiler configuration to `libtool'.
-AC_DEFUN([AC_LIBTOOL_LANG_F77_CONFIG], [_LT_AC_LANG_F77_CONFIG(F77)])
-AC_DEFUN([_LT_AC_LANG_F77_CONFIG],
-[AC_REQUIRE([AC_PROG_F77])
-AC_LANG_PUSH(Fortran 77)
-
-_LT_AC_TAGVAR(archive_cmds_need_lc, $1)=no
-_LT_AC_TAGVAR(allow_undefined_flag, $1)=
-_LT_AC_TAGVAR(always_export_symbols, $1)=no
-_LT_AC_TAGVAR(archive_expsym_cmds, $1)=
-_LT_AC_TAGVAR(export_dynamic_flag_spec, $1)=
-_LT_AC_TAGVAR(hardcode_direct, $1)=no
-_LT_AC_TAGVAR(hardcode_libdir_flag_spec, $1)=
-_LT_AC_TAGVAR(hardcode_libdir_flag_spec_ld, $1)=
-_LT_AC_TAGVAR(hardcode_libdir_separator, $1)=
-_LT_AC_TAGVAR(hardcode_minus_L, $1)=no
-_LT_AC_TAGVAR(hardcode_automatic, $1)=no
-_LT_AC_TAGVAR(module_cmds, $1)=
-_LT_AC_TAGVAR(module_expsym_cmds, $1)=
-_LT_AC_TAGVAR(link_all_deplibs, $1)=unknown
-_LT_AC_TAGVAR(old_archive_cmds, $1)=$old_archive_cmds
-_LT_AC_TAGVAR(no_undefined_flag, $1)=
-_LT_AC_TAGVAR(whole_archive_flag_spec, $1)=
-_LT_AC_TAGVAR(enable_shared_with_static_runtimes, $1)=no
-
-# Source file extension for f77 test sources.
-ac_ext=f
-
-# Object file extension for compiled f77 test sources.
-objext=o
-_LT_AC_TAGVAR(objext, $1)=$objext
-
-# Code to be used in simple compile tests
-lt_simple_compile_test_code="\
- subroutine t
- return
- end
-"
-
-# Code to be used in simple link tests
-lt_simple_link_test_code="\
- program t
- end
-"
-
-# ltmain only uses $CC for tagged configurations so make sure $CC is set.
-_LT_AC_SYS_COMPILER
-
-# save warnings/boilerplate of simple test code
-_LT_COMPILER_BOILERPLATE
-_LT_LINKER_BOILERPLATE
-
-# Allow CC to be a program name with arguments.
-lt_save_CC="$CC"
-CC=${F77-"f77"}
-compiler=$CC
-_LT_AC_TAGVAR(compiler, $1)=$CC
-_LT_CC_BASENAME([$compiler])
-
-AC_MSG_CHECKING([if libtool supports shared libraries])
-AC_MSG_RESULT([$can_build_shared])
-
-AC_MSG_CHECKING([whether to build shared libraries])
-test "$can_build_shared" = "no" && enable_shared=no
-
-# On AIX, shared libraries and static libraries use the same namespace, and
-# are all built from PIC.
-case $host_os in
-aix3*)
- test "$enable_shared" = yes && enable_static=no
- if test -n "$RANLIB"; then
- archive_cmds="$archive_cmds~\$RANLIB \$lib"
- postinstall_cmds='$RANLIB $lib'
- fi
- ;;
-aix[[4-9]]*)
- if test "$host_cpu" != ia64 && test "$aix_use_runtimelinking" = no ; then
- test "$enable_shared" = yes && enable_static=no
- fi
- ;;
-esac
-AC_MSG_RESULT([$enable_shared])
-
-AC_MSG_CHECKING([whether to build static libraries])
-# Make sure either enable_shared or enable_static is yes.
-test "$enable_shared" = yes || enable_static=yes
-AC_MSG_RESULT([$enable_static])
-
-_LT_AC_TAGVAR(GCC, $1)="$G77"
-_LT_AC_TAGVAR(LD, $1)="$LD"
-
-AC_LIBTOOL_PROG_COMPILER_PIC($1)
-AC_LIBTOOL_PROG_CC_C_O($1)
-AC_LIBTOOL_SYS_HARD_LINK_LOCKS($1)
-AC_LIBTOOL_PROG_LD_SHLIBS($1)
-AC_LIBTOOL_SYS_DYNAMIC_LINKER($1)
-AC_LIBTOOL_PROG_LD_HARDCODE_LIBPATH($1)
-
-AC_LIBTOOL_CONFIG($1)
-
-AC_LANG_POP
-CC="$lt_save_CC"
-])# AC_LIBTOOL_LANG_F77_CONFIG
-
-
-# AC_LIBTOOL_LANG_GCJ_CONFIG
-# --------------------------
-# Ensure that the configuration vars for the C compiler are
-# suitably defined. Those variables are subsequently used by
-# AC_LIBTOOL_CONFIG to write the compiler configuration to `libtool'.
-AC_DEFUN([AC_LIBTOOL_LANG_GCJ_CONFIG], [_LT_AC_LANG_GCJ_CONFIG(GCJ)])
-AC_DEFUN([_LT_AC_LANG_GCJ_CONFIG],
-[AC_LANG_SAVE
-
-# Source file extension for Java test sources.
-ac_ext=java
-
-# Object file extension for compiled Java test sources.
-objext=o
-_LT_AC_TAGVAR(objext, $1)=$objext
-
-# Code to be used in simple compile tests
-lt_simple_compile_test_code="class foo {}"
-
-# Code to be used in simple link tests
-lt_simple_link_test_code='public class conftest { public static void main(String[[]] argv) {}; }'
-
-# ltmain only uses $CC for tagged configurations so make sure $CC is set.
-_LT_AC_SYS_COMPILER
-
-# save warnings/boilerplate of simple test code
-_LT_COMPILER_BOILERPLATE
-_LT_LINKER_BOILERPLATE
-
-# Allow CC to be a program name with arguments.
-lt_save_CC="$CC"
-CC=${GCJ-"gcj"}
-compiler=$CC
-_LT_AC_TAGVAR(compiler, $1)=$CC
-_LT_CC_BASENAME([$compiler])
-
-# GCJ did not exist at the time GCC didn't implicitly link libc in.
-_LT_AC_TAGVAR(archive_cmds_need_lc, $1)=no
-
-_LT_AC_TAGVAR(old_archive_cmds, $1)=$old_archive_cmds
-
-AC_LIBTOOL_PROG_COMPILER_NO_RTTI($1)
-AC_LIBTOOL_PROG_COMPILER_PIC($1)
-AC_LIBTOOL_PROG_CC_C_O($1)
-AC_LIBTOOL_SYS_HARD_LINK_LOCKS($1)
-AC_LIBTOOL_PROG_LD_SHLIBS($1)
-AC_LIBTOOL_SYS_DYNAMIC_LINKER($1)
-AC_LIBTOOL_PROG_LD_HARDCODE_LIBPATH($1)
-
-AC_LIBTOOL_CONFIG($1)
-
-AC_LANG_RESTORE
-CC="$lt_save_CC"
-])# AC_LIBTOOL_LANG_GCJ_CONFIG
-
-
-# AC_LIBTOOL_LANG_RC_CONFIG
-# -------------------------
-# Ensure that the configuration vars for the Windows resource compiler are
-# suitably defined. Those variables are subsequently used by
-# AC_LIBTOOL_CONFIG to write the compiler configuration to `libtool'.
-AC_DEFUN([AC_LIBTOOL_LANG_RC_CONFIG], [_LT_AC_LANG_RC_CONFIG(RC)])
-AC_DEFUN([_LT_AC_LANG_RC_CONFIG],
-[AC_LANG_SAVE
-
-# Source file extension for RC test sources.
-ac_ext=rc
-
-# Object file extension for compiled RC test sources.
-objext=o
-_LT_AC_TAGVAR(objext, $1)=$objext
-
-# Code to be used in simple compile tests
-lt_simple_compile_test_code='sample MENU { MENUITEM "&Soup", 100, CHECKED }'
-
-# Code to be used in simple link tests
-lt_simple_link_test_code="$lt_simple_compile_test_code"
-
-# ltmain only uses $CC for tagged configurations so make sure $CC is set.
-_LT_AC_SYS_COMPILER
-
-# save warnings/boilerplate of simple test code
-_LT_COMPILER_BOILERPLATE
-_LT_LINKER_BOILERPLATE
-
-# Allow CC to be a program name with arguments.
-lt_save_CC="$CC"
-CC=${RC-"windres"}
-compiler=$CC
-_LT_AC_TAGVAR(compiler, $1)=$CC
-_LT_CC_BASENAME([$compiler])
-_LT_AC_TAGVAR(lt_cv_prog_compiler_c_o, $1)=yes
-
-AC_LIBTOOL_CONFIG($1)
-
-AC_LANG_RESTORE
-CC="$lt_save_CC"
-])# AC_LIBTOOL_LANG_RC_CONFIG
-
-
-# AC_LIBTOOL_CONFIG([TAGNAME])
-# ----------------------------
-# If TAGNAME is not passed, then create an initial libtool script
-# with a default configuration from the untagged config vars. Otherwise
-# add code to config.status for appending the configuration named by
-# TAGNAME from the matching tagged config vars.
-AC_DEFUN([AC_LIBTOOL_CONFIG],
-[# The else clause should only fire when bootstrapping the
-# libtool distribution, otherwise you forgot to ship ltmain.sh
-# with your package, and you will get complaints that there are
-# no rules to generate ltmain.sh.
-if test -f "$ltmain"; then
- # See if we are running on zsh, and set the options which allow our commands through
- # without removal of \ escapes.
- if test -n "${ZSH_VERSION+set}" ; then
- setopt NO_GLOB_SUBST
- fi
- # Now quote all the things that may contain metacharacters while being
- # careful not to overquote the AC_SUBSTed values. We take copies of the
- # variables and quote the copies for generation of the libtool script.
- for var in echo old_CC old_CFLAGS AR AR_FLAGS EGREP RANLIB LN_S LTCC LTCFLAGS NM \
- SED SHELL STRIP \
- libname_spec library_names_spec soname_spec extract_expsyms_cmds \
- old_striplib striplib file_magic_cmd finish_cmds finish_eval \
- deplibs_check_method reload_flag reload_cmds need_locks \
- lt_cv_sys_global_symbol_pipe lt_cv_sys_global_symbol_to_cdecl \
- lt_cv_sys_global_symbol_to_c_name_address \
- sys_lib_search_path_spec sys_lib_dlsearch_path_spec \
- old_postinstall_cmds old_postuninstall_cmds \
- _LT_AC_TAGVAR(compiler, $1) \
- _LT_AC_TAGVAR(CC, $1) \
- _LT_AC_TAGVAR(LD, $1) \
- _LT_AC_TAGVAR(lt_prog_compiler_wl, $1) \
- _LT_AC_TAGVAR(lt_prog_compiler_pic, $1) \
- _LT_AC_TAGVAR(lt_prog_compiler_static, $1) \
- _LT_AC_TAGVAR(lt_prog_compiler_no_builtin_flag, $1) \
- _LT_AC_TAGVAR(export_dynamic_flag_spec, $1) \
- _LT_AC_TAGVAR(thread_safe_flag_spec, $1) \
- _LT_AC_TAGVAR(whole_archive_flag_spec, $1) \
- _LT_AC_TAGVAR(enable_shared_with_static_runtimes, $1) \
- _LT_AC_TAGVAR(old_archive_cmds, $1) \
- _LT_AC_TAGVAR(old_archive_from_new_cmds, $1) \
- _LT_AC_TAGVAR(predep_objects, $1) \
- _LT_AC_TAGVAR(postdep_objects, $1) \
- _LT_AC_TAGVAR(predeps, $1) \
- _LT_AC_TAGVAR(postdeps, $1) \
- _LT_AC_TAGVAR(compiler_lib_search_path, $1) \
- _LT_AC_TAGVAR(compiler_lib_search_dirs, $1) \
- _LT_AC_TAGVAR(archive_cmds, $1) \
- _LT_AC_TAGVAR(archive_expsym_cmds, $1) \
- _LT_AC_TAGVAR(postinstall_cmds, $1) \
- _LT_AC_TAGVAR(postuninstall_cmds, $1) \
- _LT_AC_TAGVAR(old_archive_from_expsyms_cmds, $1) \
- _LT_AC_TAGVAR(allow_undefined_flag, $1) \
- _LT_AC_TAGVAR(no_undefined_flag, $1) \
- _LT_AC_TAGVAR(export_symbols_cmds, $1) \
- _LT_AC_TAGVAR(hardcode_libdir_flag_spec, $1) \
- _LT_AC_TAGVAR(hardcode_libdir_flag_spec_ld, $1) \
- _LT_AC_TAGVAR(hardcode_libdir_separator, $1) \
- _LT_AC_TAGVAR(hardcode_automatic, $1) \
- _LT_AC_TAGVAR(module_cmds, $1) \
- _LT_AC_TAGVAR(module_expsym_cmds, $1) \
- _LT_AC_TAGVAR(lt_cv_prog_compiler_c_o, $1) \
- _LT_AC_TAGVAR(fix_srcfile_path, $1) \
- _LT_AC_TAGVAR(exclude_expsyms, $1) \
- _LT_AC_TAGVAR(include_expsyms, $1); do
-
- case $var in
- _LT_AC_TAGVAR(old_archive_cmds, $1) | \
- _LT_AC_TAGVAR(old_archive_from_new_cmds, $1) | \
- _LT_AC_TAGVAR(archive_cmds, $1) | \
- _LT_AC_TAGVAR(archive_expsym_cmds, $1) | \
- _LT_AC_TAGVAR(module_cmds, $1) | \
- _LT_AC_TAGVAR(module_expsym_cmds, $1) | \
- _LT_AC_TAGVAR(old_archive_from_expsyms_cmds, $1) | \
- _LT_AC_TAGVAR(export_symbols_cmds, $1) | \
- extract_expsyms_cmds | reload_cmds | finish_cmds | \
- postinstall_cmds | postuninstall_cmds | \
- old_postinstall_cmds | old_postuninstall_cmds | \
- sys_lib_search_path_spec | sys_lib_dlsearch_path_spec)
- # Double-quote double-evaled strings.
- eval "lt_$var=\\\"\`\$echo \"X\$$var\" | \$Xsed -e \"\$double_quote_subst\" -e \"\$sed_quote_subst\" -e \"\$delay_variable_subst\"\`\\\""
- ;;
- *)
- eval "lt_$var=\\\"\`\$echo \"X\$$var\" | \$Xsed -e \"\$sed_quote_subst\"\`\\\""
- ;;
- esac
- done
-
- case $lt_echo in
- *'\[$]0 --fallback-echo"')
- lt_echo=`$echo "X$lt_echo" | $Xsed -e 's/\\\\\\\[$]0 --fallback-echo"[$]/[$]0 --fallback-echo"/'`
- ;;
- esac
-
-ifelse([$1], [],
- [cfgfile="${ofile}T"
- trap "$rm \"$cfgfile\"; exit 1" 1 2 15
- $rm -f "$cfgfile"
- AC_MSG_NOTICE([creating $ofile])],
- [cfgfile="$ofile"])
-
- cat <<__EOF__ >> "$cfgfile"
-ifelse([$1], [],
-[#! $SHELL
-
-# `$echo "$cfgfile" | sed 's%^.*/%%'` - Provide generalized library-building support services.
-# Generated automatically by $PROGRAM (GNU $PACKAGE $VERSION$TIMESTAMP)
-# NOTE: Changes made to this file will be lost: look at ltmain.sh.
-#
-# Copyright (C) 1996, 1997, 1998, 1999, 2000, 2001, 2002, 2003, 2004, 2005, 2006, 2007, 2008
-# Free Software Foundation, Inc.
-#
-# This file is part of GNU Libtool:
-# Originally by Gordon Matzigkeit <gord@gnu.ai.mit.edu>, 1996
-#
-# This program is free software; you can redistribute it and/or modify
-# it under the terms of the GNU General Public License as published by
-# the Free Software Foundation; either version 2 of the License, or
-# (at your option) any later version.
-#
-# This program is distributed in the hope that it will be useful, but
-# WITHOUT ANY WARRANTY; without even the implied warranty of
-# MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the GNU
-# General Public License for more details.
-#
-# You should have received a copy of the GNU General Public License
-# along with this program; if not, write to the Free Software
-# Foundation, Inc., 51 Franklin Street, Fifth Floor, Boston, MA 02110-1301, USA.
-#
-# As a special exception to the GNU General Public License, if you
-# distribute this file as part of a program that contains a
-# configuration script generated by Autoconf, you may include it under
-# the same distribution terms that you use for the rest of that program.
-
-# A sed program that does not truncate output.
-SED=$lt_SED
-
-# Sed that helps us avoid accidentally triggering echo(1) options like -n.
-Xsed="$SED -e 1s/^X//"
-
-# The HP-UX ksh and POSIX shell print the target directory to stdout
-# if CDPATH is set.
-(unset CDPATH) >/dev/null 2>&1 && unset CDPATH
-
-# The names of the tagged configurations supported by this script.
-available_tags=
-
-# ### BEGIN LIBTOOL CONFIG],
-[# ### BEGIN LIBTOOL TAG CONFIG: $tagname])
-
-# Libtool was configured on host `(hostname || uname -n) 2>/dev/null | sed 1q`:
-
-# Shell to use when invoking shell scripts.
-SHELL=$lt_SHELL
-
-# Whether or not to build shared libraries.
-build_libtool_libs=$enable_shared
-
-# Whether or not to build static libraries.
-build_old_libs=$enable_static
-
-# Whether or not to add -lc for building shared libraries.
-build_libtool_need_lc=$_LT_AC_TAGVAR(archive_cmds_need_lc, $1)
-
-# Whether or not to disallow shared libs when runtime libs are static
-allow_libtool_libs_with_static_runtimes=$_LT_AC_TAGVAR(enable_shared_with_static_runtimes, $1)
-
-# Whether or not to optimize for fast installation.
-fast_install=$enable_fast_install
-
-# The host system.
-host_alias=$host_alias
-host=$host
-host_os=$host_os
-
-# The build system.
-build_alias=$build_alias
-build=$build
-build_os=$build_os
-
-# An echo program that does not interpret backslashes.
-echo=$lt_echo
-
-# The archiver.
-AR=$lt_AR
-AR_FLAGS=$lt_AR_FLAGS
-
-# A C compiler.
-LTCC=$lt_LTCC
-
-# LTCC compiler flags.
-LTCFLAGS=$lt_LTCFLAGS
-
-# A language-specific compiler.
-CC=$lt_[]_LT_AC_TAGVAR(compiler, $1)
-
-# Is the compiler the GNU C compiler?
-with_gcc=$_LT_AC_TAGVAR(GCC, $1)
-
-# An ERE matcher.
-EGREP=$lt_EGREP
-
-# The linker used to build libraries.
-LD=$lt_[]_LT_AC_TAGVAR(LD, $1)
-
-# Whether we need hard or soft links.
-LN_S=$lt_LN_S
-
-# A BSD-compatible nm program.
-NM=$lt_NM
-
-# A symbol stripping program
-STRIP=$lt_STRIP
-
-# Used to examine libraries when file_magic_cmd begins "file"
-MAGIC_CMD=$MAGIC_CMD
-
-# Used on cygwin: DLL creation program.
-DLLTOOL="$DLLTOOL"
-
-# Used on cygwin: object dumper.
-OBJDUMP="$OBJDUMP"
-
-# Used on cygwin: assembler.
-AS="$AS"
-
-# The name of the directory that contains temporary libtool files.
-objdir=$objdir
-
-# How to create reloadable object files.
-reload_flag=$lt_reload_flag
-reload_cmds=$lt_reload_cmds
-
-# How to pass a linker flag through the compiler.
-wl=$lt_[]_LT_AC_TAGVAR(lt_prog_compiler_wl, $1)
-
-# Object file suffix (normally "o").
-objext="$ac_objext"
-
-# Old archive suffix (normally "a").
-libext="$libext"
-
-# Shared library suffix (normally ".so").
-shrext_cmds='$shrext_cmds'
-
-# Executable file suffix (normally "").
-exeext="$exeext"
-
-# Additional compiler flags for building library objects.
-pic_flag=$lt_[]_LT_AC_TAGVAR(lt_prog_compiler_pic, $1)
-pic_mode=$pic_mode
-
-# What is the maximum length of a command?
-max_cmd_len=$lt_cv_sys_max_cmd_len
-
-# Does compiler simultaneously support -c and -o options?
-compiler_c_o=$lt_[]_LT_AC_TAGVAR(lt_cv_prog_compiler_c_o, $1)
-
-# Must we lock files when doing compilation?
-need_locks=$lt_need_locks
-
-# Do we need the lib prefix for modules?
-need_lib_prefix=$need_lib_prefix
-
-# Do we need a version for libraries?
-need_version=$need_version
-
-# Whether dlopen is supported.
-dlopen_support=$enable_dlopen
-
-# Whether dlopen of programs is supported.
-dlopen_self=$enable_dlopen_self
-
-# Whether dlopen of statically linked programs is supported.
-dlopen_self_static=$enable_dlopen_self_static
-
-# Compiler flag to prevent dynamic linking.
-link_static_flag=$lt_[]_LT_AC_TAGVAR(lt_prog_compiler_static, $1)
-
-# Compiler flag to turn off builtin functions.
-no_builtin_flag=$lt_[]_LT_AC_TAGVAR(lt_prog_compiler_no_builtin_flag, $1)
-
-# Compiler flag to allow reflexive dlopens.
-export_dynamic_flag_spec=$lt_[]_LT_AC_TAGVAR(export_dynamic_flag_spec, $1)
-
-# Compiler flag to generate shared objects directly from archives.
-whole_archive_flag_spec=$lt_[]_LT_AC_TAGVAR(whole_archive_flag_spec, $1)
-
-# Compiler flag to generate thread-safe objects.
-thread_safe_flag_spec=$lt_[]_LT_AC_TAGVAR(thread_safe_flag_spec, $1)
-
-# Library versioning type.
-version_type=$version_type
-
-# Format of library name prefix.
-libname_spec=$lt_libname_spec
-
-# List of archive names. First name is the real one, the rest are links.
-# The last name is the one that the linker finds with -lNAME.
-library_names_spec=$lt_library_names_spec
-
-# The coded name of the library, if different from the real name.
-soname_spec=$lt_soname_spec
-
-# Commands used to build and install an old-style archive.
-RANLIB=$lt_RANLIB
-old_archive_cmds=$lt_[]_LT_AC_TAGVAR(old_archive_cmds, $1)
-old_postinstall_cmds=$lt_old_postinstall_cmds
-old_postuninstall_cmds=$lt_old_postuninstall_cmds
-
-# Create an old-style archive from a shared archive.
-old_archive_from_new_cmds=$lt_[]_LT_AC_TAGVAR(old_archive_from_new_cmds, $1)
-
-# Create a temporary old-style archive to link instead of a shared archive.
-old_archive_from_expsyms_cmds=$lt_[]_LT_AC_TAGVAR(old_archive_from_expsyms_cmds, $1)
-
-# Commands used to build and install a shared archive.
-archive_cmds=$lt_[]_LT_AC_TAGVAR(archive_cmds, $1)
-archive_expsym_cmds=$lt_[]_LT_AC_TAGVAR(archive_expsym_cmds, $1)
-postinstall_cmds=$lt_postinstall_cmds
-postuninstall_cmds=$lt_postuninstall_cmds
-
-# Commands used to build a loadable module (assumed same as above if empty)
-module_cmds=$lt_[]_LT_AC_TAGVAR(module_cmds, $1)
-module_expsym_cmds=$lt_[]_LT_AC_TAGVAR(module_expsym_cmds, $1)
-
-# Commands to strip libraries.
-old_striplib=$lt_old_striplib
-striplib=$lt_striplib
-
-# Dependencies to place before the objects being linked to create a
-# shared library.
-predep_objects=$lt_[]_LT_AC_TAGVAR(predep_objects, $1)
-
-# Dependencies to place after the objects being linked to create a
-# shared library.
-postdep_objects=$lt_[]_LT_AC_TAGVAR(postdep_objects, $1)
-
-# Dependencies to place before the objects being linked to create a
-# shared library.
-predeps=$lt_[]_LT_AC_TAGVAR(predeps, $1)
-
-# Dependencies to place after the objects being linked to create a
-# shared library.
-postdeps=$lt_[]_LT_AC_TAGVAR(postdeps, $1)
-
-# The directories searched by this compiler when creating a shared
-# library
-compiler_lib_search_dirs=$lt_[]_LT_AC_TAGVAR(compiler_lib_search_dirs, $1)
-
-# The library search path used internally by the compiler when linking
-# a shared library.
-compiler_lib_search_path=$lt_[]_LT_AC_TAGVAR(compiler_lib_search_path, $1)
-
-# Method to check whether dependent libraries are shared objects.
-deplibs_check_method=$lt_deplibs_check_method
-
-# Command to use when deplibs_check_method == file_magic.
-file_magic_cmd=$lt_file_magic_cmd
-
-# Flag that allows shared libraries with undefined symbols to be built.
-allow_undefined_flag=$lt_[]_LT_AC_TAGVAR(allow_undefined_flag, $1)
-
-# Flag that forces no undefined symbols.
-no_undefined_flag=$lt_[]_LT_AC_TAGVAR(no_undefined_flag, $1)
-
-# Commands used to finish a libtool library installation in a directory.
-finish_cmds=$lt_finish_cmds
-
-# Same as above, but a single script fragment to be evaled but not shown.
-finish_eval=$lt_finish_eval
-
-# Take the output of nm and produce a listing of raw symbols and C names.
-global_symbol_pipe=$lt_lt_cv_sys_global_symbol_pipe
-
-# Transform the output of nm in a proper C declaration
-global_symbol_to_cdecl=$lt_lt_cv_sys_global_symbol_to_cdecl
-
-# Transform the output of nm in a C name address pair
-global_symbol_to_c_name_address=$lt_lt_cv_sys_global_symbol_to_c_name_address
-
-# This is the shared library runtime path variable.
-runpath_var=$runpath_var
-
-# This is the shared library path variable.
-shlibpath_var=$shlibpath_var
-
-# Is shlibpath searched before the hard-coded library search path?
-shlibpath_overrides_runpath=$shlibpath_overrides_runpath
-
-# How to hardcode a shared library path into an executable.
-hardcode_action=$_LT_AC_TAGVAR(hardcode_action, $1)
-
-# Whether we should hardcode library paths into libraries.
-hardcode_into_libs=$hardcode_into_libs
-
-# Flag to hardcode \$libdir into a binary during linking.
-# This must work even if \$libdir does not exist.
-hardcode_libdir_flag_spec=$lt_[]_LT_AC_TAGVAR(hardcode_libdir_flag_spec, $1)
-
-# If ld is used when linking, flag to hardcode \$libdir into
-# a binary during linking. This must work even if \$libdir does
-# not exist.
-hardcode_libdir_flag_spec_ld=$lt_[]_LT_AC_TAGVAR(hardcode_libdir_flag_spec_ld, $1)
-
-# Whether we need a single -rpath flag with a separated argument.
-hardcode_libdir_separator=$lt_[]_LT_AC_TAGVAR(hardcode_libdir_separator, $1)
-
-# Set to yes if using DIR/libNAME${shared_ext} during linking hardcodes DIR into the
-# resulting binary.
-hardcode_direct=$_LT_AC_TAGVAR(hardcode_direct, $1)
-
-# Set to yes if using the -LDIR flag during linking hardcodes DIR into the
-# resulting binary.
-hardcode_minus_L=$_LT_AC_TAGVAR(hardcode_minus_L, $1)
-
-# Set to yes if using SHLIBPATH_VAR=DIR during linking hardcodes DIR into
-# the resulting binary.
-hardcode_shlibpath_var=$_LT_AC_TAGVAR(hardcode_shlibpath_var, $1)
-
-# Set to yes if building a shared library automatically hardcodes DIR into the library
-# and all subsequent libraries and executables linked against it.
-hardcode_automatic=$_LT_AC_TAGVAR(hardcode_automatic, $1)
-
-# Variables whose values should be saved in libtool wrapper scripts and
-# restored at relink time.
-variables_saved_for_relink="$variables_saved_for_relink"
-
-# Whether libtool must link a program against all its dependency libraries.
-link_all_deplibs=$_LT_AC_TAGVAR(link_all_deplibs, $1)
-
-# Compile-time system search path for libraries
-sys_lib_search_path_spec=$lt_sys_lib_search_path_spec
-
-# Run-time system search path for libraries
-sys_lib_dlsearch_path_spec=$lt_sys_lib_dlsearch_path_spec
-
-# Fix the shell variable \$srcfile for the compiler.
-fix_srcfile_path=$lt_fix_srcfile_path
-
-# Set to yes if exported symbols are required.
-always_export_symbols=$_LT_AC_TAGVAR(always_export_symbols, $1)
-
-# The commands to list exported symbols.
-export_symbols_cmds=$lt_[]_LT_AC_TAGVAR(export_symbols_cmds, $1)
-
-# The commands to extract the exported symbol list from a shared archive.
-extract_expsyms_cmds=$lt_extract_expsyms_cmds
-
-# Symbols that should not be listed in the preloaded symbols.
-exclude_expsyms=$lt_[]_LT_AC_TAGVAR(exclude_expsyms, $1)
-
-# Symbols that must always be exported.
-include_expsyms=$lt_[]_LT_AC_TAGVAR(include_expsyms, $1)
-
-ifelse([$1],[],
-[# ### END LIBTOOL CONFIG],
-[# ### END LIBTOOL TAG CONFIG: $tagname])
-
-__EOF__
-
-ifelse([$1],[], [
- case $host_os in
- aix3*)
- cat <<\EOF >> "$cfgfile"
-
-# AIX sometimes has problems with the GCC collect2 program. For some
-# reason, if we set the COLLECT_NAMES environment variable, the problems
-# vanish in a puff of smoke.
-if test "X${COLLECT_NAMES+set}" != Xset; then
- COLLECT_NAMES=
- export COLLECT_NAMES
-fi
-EOF
- ;;
- esac
-
- # We use sed instead of cat because bash on DJGPP gets confused if
- # if finds mixed CR/LF and LF-only lines. Since sed operates in
- # text mode, it properly converts lines to CR/LF. This bash problem
- # is reportedly fixed, but why not run on old versions too?
- sed '$q' "$ltmain" >> "$cfgfile" || (rm -f "$cfgfile"; exit 1)
-
- mv -f "$cfgfile" "$ofile" || \
- (rm -f "$ofile" && cp "$cfgfile" "$ofile" && rm -f "$cfgfile")
- chmod +x "$ofile"
-])
-else
- # If there is no Makefile yet, we rely on a make rule to execute
- # `config.status --recheck' to rerun these tests and create the
- # libtool script then.
- ltmain_in=`echo $ltmain | sed -e 's/\.sh$/.in/'`
- if test -f "$ltmain_in"; then
- test -f Makefile && make "$ltmain"
- fi
-fi
-])# AC_LIBTOOL_CONFIG
-
-
-# AC_LIBTOOL_PROG_COMPILER_NO_RTTI([TAGNAME])
-# -------------------------------------------
-AC_DEFUN([AC_LIBTOOL_PROG_COMPILER_NO_RTTI],
-[AC_REQUIRE([_LT_AC_SYS_COMPILER])dnl
-
-_LT_AC_TAGVAR(lt_prog_compiler_no_builtin_flag, $1)=
-
-if test "$GCC" = yes; then
- _LT_AC_TAGVAR(lt_prog_compiler_no_builtin_flag, $1)=' -fno-builtin'
-
- AC_LIBTOOL_COMPILER_OPTION([if $compiler supports -fno-rtti -fno-exceptions],
- lt_cv_prog_compiler_rtti_exceptions,
- [-fno-rtti -fno-exceptions], [],
- [_LT_AC_TAGVAR(lt_prog_compiler_no_builtin_flag, $1)="$_LT_AC_TAGVAR(lt_prog_compiler_no_builtin_flag, $1) -fno-rtti -fno-exceptions"])
-fi
-])# AC_LIBTOOL_PROG_COMPILER_NO_RTTI
-
-
-# AC_LIBTOOL_SYS_GLOBAL_SYMBOL_PIPE
-# ---------------------------------
-AC_DEFUN([AC_LIBTOOL_SYS_GLOBAL_SYMBOL_PIPE],
-[AC_REQUIRE([AC_CANONICAL_HOST])
-AC_REQUIRE([LT_AC_PROG_SED])
-AC_REQUIRE([AC_PROG_NM])
-AC_REQUIRE([AC_OBJEXT])
-# Check for command to grab the raw symbol name followed by C symbol from nm.
-AC_MSG_CHECKING([command to parse $NM output from $compiler object])
-AC_CACHE_VAL([lt_cv_sys_global_symbol_pipe],
-[
-# These are sane defaults that work on at least a few old systems.
-# [They come from Ultrix. What could be older than Ultrix?!! ;)]
-
-# Character class describing NM global symbol codes.
-symcode='[[BCDEGRST]]'
-
-# Regexp to match symbols that can be accessed directly from C.
-sympat='\([[_A-Za-z]][[_A-Za-z0-9]]*\)'
-
-# Transform an extracted symbol line into a proper C declaration
-lt_cv_sys_global_symbol_to_cdecl="sed -n -e 's/^. .* \(.*\)$/extern int \1;/p'"
-
-# Transform an extracted symbol line into symbol name and symbol address
-lt_cv_sys_global_symbol_to_c_name_address="sed -n -e 's/^: \([[^ ]]*\) $/ {\\\"\1\\\", (lt_ptr) 0},/p' -e 's/^$symcode \([[^ ]]*\) \([[^ ]]*\)$/ {\"\2\", (lt_ptr) \&\2},/p'"
-
-# Define system-specific variables.
-case $host_os in
-aix*)
- symcode='[[BCDT]]'
- ;;
-cygwin* | mingw* | pw32*)
- symcode='[[ABCDGISTW]]'
- ;;
-hpux*) # Its linker distinguishes data from code symbols
- if test "$host_cpu" = ia64; then
- symcode='[[ABCDEGRST]]'
- fi
- lt_cv_sys_global_symbol_to_cdecl="sed -n -e 's/^T .* \(.*\)$/extern int \1();/p' -e 's/^$symcode* .* \(.*\)$/extern char \1;/p'"
- lt_cv_sys_global_symbol_to_c_name_address="sed -n -e 's/^: \([[^ ]]*\) $/ {\\\"\1\\\", (lt_ptr) 0},/p' -e 's/^$symcode* \([[^ ]]*\) \([[^ ]]*\)$/ {\"\2\", (lt_ptr) \&\2},/p'"
- ;;
-linux* | k*bsd*-gnu)
- if test "$host_cpu" = ia64; then
- symcode='[[ABCDGIRSTW]]'
- lt_cv_sys_global_symbol_to_cdecl="sed -n -e 's/^T .* \(.*\)$/extern int \1();/p' -e 's/^$symcode* .* \(.*\)$/extern char \1;/p'"
- lt_cv_sys_global_symbol_to_c_name_address="sed -n -e 's/^: \([[^ ]]*\) $/ {\\\"\1\\\", (lt_ptr) 0},/p' -e 's/^$symcode* \([[^ ]]*\) \([[^ ]]*\)$/ {\"\2\", (lt_ptr) \&\2},/p'"
- fi
- ;;
-irix* | nonstopux*)
- symcode='[[BCDEGRST]]'
- ;;
-osf*)
- symcode='[[BCDEGQRST]]'
- ;;
-solaris*)
- symcode='[[BDRT]]'
- ;;
-sco3.2v5*)
- symcode='[[DT]]'
- ;;
-sysv4.2uw2*)
- symcode='[[DT]]'
- ;;
-sysv5* | sco5v6* | unixware* | OpenUNIX*)
- symcode='[[ABDT]]'
- ;;
-sysv4)
- symcode='[[DFNSTU]]'
- ;;
-esac
-
-# Handle CRLF in mingw tool chain
-opt_cr=
-case $build_os in
-mingw*)
- opt_cr=`echo 'x\{0,1\}' | tr x '\015'` # option cr in regexp
- ;;
-esac
-
-# If we're using GNU nm, then use its standard symbol codes.
-case `$NM -V 2>&1` in
-*GNU* | *'with BFD'*)
- symcode='[[ABCDGIRSTW]]' ;;
-esac
-
-# Try without a prefix undercore, then with it.
-for ac_symprfx in "" "_"; do
-
- # Transform symcode, sympat, and symprfx into a raw symbol and a C symbol.
- symxfrm="\\1 $ac_symprfx\\2 \\2"
-
- # Write the raw and C identifiers.
- lt_cv_sys_global_symbol_pipe="sed -n -e 's/^.*[[ ]]\($symcode$symcode*\)[[ ]][[ ]]*$ac_symprfx$sympat$opt_cr$/$symxfrm/p'"
-
- # Check to see that the pipe works correctly.
- pipe_works=no
-
- rm -f conftest*
- cat > conftest.$ac_ext <<EOF
-#ifdef __cplusplus
-extern "C" {
-#endif
-char nm_test_var;
-void nm_test_func(){}
-#ifdef __cplusplus
-}
-#endif
-int main(){nm_test_var='a';nm_test_func();return(0);}
-EOF
-
- if AC_TRY_EVAL(ac_compile); then
- # Now try to grab the symbols.
- nlist=conftest.nm
- if AC_TRY_EVAL(NM conftest.$ac_objext \| $lt_cv_sys_global_symbol_pipe \> $nlist) && test -s "$nlist"; then
- # Try sorting and uniquifying the output.
- if sort "$nlist" | uniq > "$nlist"T; then
- mv -f "$nlist"T "$nlist"
- else
- rm -f "$nlist"T
- fi
-
- # Make sure that we snagged all the symbols we need.
- if grep ' nm_test_var$' "$nlist" >/dev/null; then
- if grep ' nm_test_func$' "$nlist" >/dev/null; then
- cat <<EOF > conftest.$ac_ext
-#ifdef __cplusplus
-extern "C" {
-#endif
-
-EOF
- # Now generate the symbol file.
- eval "$lt_cv_sys_global_symbol_to_cdecl"' < "$nlist" | grep -v main >> conftest.$ac_ext'
-
- cat <<EOF >> conftest.$ac_ext
-#if defined (__STDC__) && __STDC__
-# define lt_ptr_t void *
-#else
-# define lt_ptr_t char *
-# define const
-#endif
-
-/* The mapping between symbol names and symbols. */
-const struct {
- const char *name;
- lt_ptr_t address;
-}
-lt_preloaded_symbols[[]] =
-{
-EOF
- $SED "s/^$symcode$symcode* \(.*\) \(.*\)$/ {\"\2\", (lt_ptr_t) \&\2},/" < "$nlist" | grep -v main >> conftest.$ac_ext
- cat <<\EOF >> conftest.$ac_ext
- {0, (lt_ptr_t) 0}
-};
-
-#ifdef __cplusplus
-}
-#endif
-EOF
- # Now try linking the two files.
- mv conftest.$ac_objext conftstm.$ac_objext
- lt_save_LIBS="$LIBS"
- lt_save_CFLAGS="$CFLAGS"
- LIBS="conftstm.$ac_objext"
- CFLAGS="$CFLAGS$_LT_AC_TAGVAR(lt_prog_compiler_no_builtin_flag, $1)"
- if AC_TRY_EVAL(ac_link) && test -s conftest${ac_exeext}; then
- pipe_works=yes
- fi
- LIBS="$lt_save_LIBS"
- CFLAGS="$lt_save_CFLAGS"
- else
- echo "cannot find nm_test_func in $nlist" >&AS_MESSAGE_LOG_FD
- fi
- else
- echo "cannot find nm_test_var in $nlist" >&AS_MESSAGE_LOG_FD
- fi
- else
- echo "cannot run $lt_cv_sys_global_symbol_pipe" >&AS_MESSAGE_LOG_FD
- fi
- else
- echo "$progname: failed program was:" >&AS_MESSAGE_LOG_FD
- cat conftest.$ac_ext >&5
- fi
- rm -rf conftest* conftst*
-
- # Do not use the global_symbol_pipe unless it works.
- if test "$pipe_works" = yes; then
- break
- else
- lt_cv_sys_global_symbol_pipe=
- fi
-done
-])
-if test -z "$lt_cv_sys_global_symbol_pipe"; then
- lt_cv_sys_global_symbol_to_cdecl=
-fi
-if test -z "$lt_cv_sys_global_symbol_pipe$lt_cv_sys_global_symbol_to_cdecl"; then
- AC_MSG_RESULT(failed)
-else
- AC_MSG_RESULT(ok)
-fi
-]) # AC_LIBTOOL_SYS_GLOBAL_SYMBOL_PIPE
-
-
-# AC_LIBTOOL_PROG_COMPILER_PIC([TAGNAME])
-# ---------------------------------------
-AC_DEFUN([AC_LIBTOOL_PROG_COMPILER_PIC],
-[_LT_AC_TAGVAR(lt_prog_compiler_wl, $1)=
-_LT_AC_TAGVAR(lt_prog_compiler_pic, $1)=
-_LT_AC_TAGVAR(lt_prog_compiler_static, $1)=
-
-AC_MSG_CHECKING([for $compiler option to produce PIC])
- ifelse([$1],[CXX],[
- # C++ specific cases for pic, static, wl, etc.
- if test "$GXX" = yes; then
- _LT_AC_TAGVAR(lt_prog_compiler_wl, $1)='-Wl,'
- _LT_AC_TAGVAR(lt_prog_compiler_static, $1)='-static'
-
- case $host_os in
- aix*)
- # All AIX code is PIC.
- if test "$host_cpu" = ia64; then
- # AIX 5 now supports IA64 processor
- _LT_AC_TAGVAR(lt_prog_compiler_static, $1)='-Bstatic'
- fi
- ;;
- amigaos*)
- # FIXME: we need at least 68020 code to build shared libraries, but
- # adding the `-m68020' flag to GCC prevents building anything better,
- # like `-m68040'.
- _LT_AC_TAGVAR(lt_prog_compiler_pic, $1)='-m68020 -resident32 -malways-restore-a4'
- ;;
- beos* | irix5* | irix6* | nonstopux* | osf3* | osf4* | osf5*)
- # PIC is the default for these OSes.
- ;;
- mingw* | cygwin* | os2* | pw32*)
- # This hack is so that the source file can tell whether it is being
- # built for inclusion in a dll (and should export symbols for example).
- # Although the cygwin gcc ignores -fPIC, still need this for old-style
- # (--disable-auto-import) libraries
- m4_if([$1], [GCJ], [],
- [_LT_AC_TAGVAR(lt_prog_compiler_pic, $1)='-DDLL_EXPORT'])
- ;;
- darwin* | rhapsody*)
- # PIC is the default on this platform
- # Common symbols not allowed in MH_DYLIB files
- _LT_AC_TAGVAR(lt_prog_compiler_pic, $1)='-fno-common'
- ;;
- *djgpp*)
- # DJGPP does not support shared libraries at all
- _LT_AC_TAGVAR(lt_prog_compiler_pic, $1)=
- ;;
- interix[[3-9]]*)
- # Interix 3.x gcc -fpic/-fPIC options generate broken code.
- # Instead, we relocate shared libraries at runtime.
- ;;
- sysv4*MP*)
- if test -d /usr/nec; then
- _LT_AC_TAGVAR(lt_prog_compiler_pic, $1)=-Kconform_pic
- fi
- ;;
- hpux*)
- # PIC is the default for IA64 HP-UX and 64-bit HP-UX, but
- # not for PA HP-UX.
- case $host_cpu in
- hppa*64*|ia64*)
- ;;
- *)
- _LT_AC_TAGVAR(lt_prog_compiler_pic, $1)='-fPIC'
- ;;
- esac
- ;;
- *)
- _LT_AC_TAGVAR(lt_prog_compiler_pic, $1)='-fPIC'
- ;;
- esac
- else
- case $host_os in
- aix[[4-9]]*)
- # All AIX code is PIC.
- if test "$host_cpu" = ia64; then
- # AIX 5 now supports IA64 processor
- _LT_AC_TAGVAR(lt_prog_compiler_static, $1)='-Bstatic'
- else
- _LT_AC_TAGVAR(lt_prog_compiler_static, $1)='-bnso -bI:/lib/syscalls.exp'
- fi
- ;;
- chorus*)
- case $cc_basename in
- cxch68*)
- # Green Hills C++ Compiler
- # _LT_AC_TAGVAR(lt_prog_compiler_static, $1)="--no_auto_instantiation -u __main -u __premain -u _abort -r $COOL_DIR/lib/libOrb.a $MVME_DIR/lib/CC/libC.a $MVME_DIR/lib/classix/libcx.s.a"
- ;;
- esac
- ;;
- darwin*)
- # PIC is the default on this platform
- # Common symbols not allowed in MH_DYLIB files
- case $cc_basename in
- xlc*)
- _LT_AC_TAGVAR(lt_prog_compiler_pic, $1)='-qnocommon'
- _LT_AC_TAGVAR(lt_prog_compiler_wl, $1)='-Wl,'
- ;;
- esac
- ;;
- dgux*)
- case $cc_basename in
- ec++*)
- _LT_AC_TAGVAR(lt_prog_compiler_pic, $1)='-KPIC'
- ;;
- ghcx*)
- # Green Hills C++ Compiler
- _LT_AC_TAGVAR(lt_prog_compiler_pic, $1)='-pic'
- ;;
- *)
- ;;
- esac
- ;;
- freebsd* | dragonfly*)
- # FreeBSD uses GNU C++
- ;;
- hpux9* | hpux10* | hpux11*)
- case $cc_basename in
- CC*)
- _LT_AC_TAGVAR(lt_prog_compiler_wl, $1)='-Wl,'
- _LT_AC_TAGVAR(lt_prog_compiler_static, $1)='${wl}-a ${wl}archive'
- if test "$host_cpu" != ia64; then
- _LT_AC_TAGVAR(lt_prog_compiler_pic, $1)='+Z'
- fi
- ;;
- aCC*)
- _LT_AC_TAGVAR(lt_prog_compiler_wl, $1)='-Wl,'
- _LT_AC_TAGVAR(lt_prog_compiler_static, $1)='${wl}-a ${wl}archive'
- case $host_cpu in
- hppa*64*|ia64*)
- # +Z the default
- ;;
- *)
- _LT_AC_TAGVAR(lt_prog_compiler_pic, $1)='+Z'
- ;;
- esac
- ;;
- *)
- ;;
- esac
- ;;
- interix*)
- # This is c89, which is MS Visual C++ (no shared libs)
- # Anyone wants to do a port?
- ;;
- irix5* | irix6* | nonstopux*)
- case $cc_basename in
- CC*)
- _LT_AC_TAGVAR(lt_prog_compiler_wl, $1)='-Wl,'
- _LT_AC_TAGVAR(lt_prog_compiler_static, $1)='-non_shared'
- # CC pic flag -KPIC is the default.
- ;;
- *)
- ;;
- esac
- ;;
- linux* | k*bsd*-gnu)
- case $cc_basename in
- KCC*)
- # KAI C++ Compiler
- _LT_AC_TAGVAR(lt_prog_compiler_wl, $1)='--backend -Wl,'
- _LT_AC_TAGVAR(lt_prog_compiler_pic, $1)='-fPIC'
- ;;
- icpc* | ecpc*)
- # Intel C++
- _LT_AC_TAGVAR(lt_prog_compiler_wl, $1)='-Wl,'
- _LT_AC_TAGVAR(lt_prog_compiler_pic, $1)='-KPIC'
- _LT_AC_TAGVAR(lt_prog_compiler_static, $1)='-static'
- ;;
- pgCC* | pgcpp*)
- # Portland Group C++ compiler.
- _LT_AC_TAGVAR(lt_prog_compiler_wl, $1)='-Wl,'
- _LT_AC_TAGVAR(lt_prog_compiler_pic, $1)='-fpic'
- _LT_AC_TAGVAR(lt_prog_compiler_static, $1)='-Bstatic'
- ;;
- cxx*)
- # Compaq C++
- # Make sure the PIC flag is empty. It appears that all Alpha
- # Linux and Compaq Tru64 Unix objects are PIC.
- _LT_AC_TAGVAR(lt_prog_compiler_pic, $1)=
- _LT_AC_TAGVAR(lt_prog_compiler_static, $1)='-non_shared'
- ;;
- *)
- case `$CC -V 2>&1 | sed 5q` in
- *Sun\ C*)
- # Sun C++ 5.9
- _LT_AC_TAGVAR(lt_prog_compiler_pic, $1)='-KPIC'
- _LT_AC_TAGVAR(lt_prog_compiler_static, $1)='-Bstatic'
- _LT_AC_TAGVAR(lt_prog_compiler_wl, $1)='-Qoption ld '
- ;;
- esac
- ;;
- esac
- ;;
- lynxos*)
- ;;
- m88k*)
- ;;
- mvs*)
- case $cc_basename in
- cxx*)
- _LT_AC_TAGVAR(lt_prog_compiler_pic, $1)='-W c,exportall'
- ;;
- *)
- ;;
- esac
- ;;
- netbsd*)
- ;;
- osf3* | osf4* | osf5*)
- case $cc_basename in
- KCC*)
- _LT_AC_TAGVAR(lt_prog_compiler_wl, $1)='--backend -Wl,'
- ;;
- RCC*)
- # Rational C++ 2.4.1
- _LT_AC_TAGVAR(lt_prog_compiler_pic, $1)='-pic'
- ;;
- cxx*)
- # Digital/Compaq C++
- _LT_AC_TAGVAR(lt_prog_compiler_wl, $1)='-Wl,'
- # Make sure the PIC flag is empty. It appears that all Alpha
- # Linux and Compaq Tru64 Unix objects are PIC.
- _LT_AC_TAGVAR(lt_prog_compiler_pic, $1)=
- _LT_AC_TAGVAR(lt_prog_compiler_static, $1)='-non_shared'
- ;;
- *)
- ;;
- esac
- ;;
- psos*)
- ;;
- solaris*)
- case $cc_basename in
- CC*)
- # Sun C++ 4.2, 5.x and Centerline C++
- _LT_AC_TAGVAR(lt_prog_compiler_pic, $1)='-KPIC'
- _LT_AC_TAGVAR(lt_prog_compiler_static, $1)='-Bstatic'
- _LT_AC_TAGVAR(lt_prog_compiler_wl, $1)='-Qoption ld '
- ;;
- gcx*)
- # Green Hills C++ Compiler
- _LT_AC_TAGVAR(lt_prog_compiler_pic, $1)='-PIC'
- ;;
- *)
- ;;
- esac
- ;;
- sunos4*)
- case $cc_basename in
- CC*)
- # Sun C++ 4.x
- _LT_AC_TAGVAR(lt_prog_compiler_pic, $1)='-pic'
- _LT_AC_TAGVAR(lt_prog_compiler_static, $1)='-Bstatic'
- ;;
- lcc*)
- # Lucid
- _LT_AC_TAGVAR(lt_prog_compiler_pic, $1)='-pic'
- ;;
- *)
- ;;
- esac
- ;;
- tandem*)
- case $cc_basename in
- NCC*)
- # NonStop-UX NCC 3.20
- _LT_AC_TAGVAR(lt_prog_compiler_pic, $1)='-KPIC'
- ;;
- *)
- ;;
- esac
- ;;
- sysv5* | unixware* | sco3.2v5* | sco5v6* | OpenUNIX*)
- case $cc_basename in
- CC*)
- _LT_AC_TAGVAR(lt_prog_compiler_wl, $1)='-Wl,'
- _LT_AC_TAGVAR(lt_prog_compiler_pic, $1)='-KPIC'
- _LT_AC_TAGVAR(lt_prog_compiler_static, $1)='-Bstatic'
- ;;
- esac
- ;;
- vxworks*)
- ;;
- *)
- _LT_AC_TAGVAR(lt_prog_compiler_can_build_shared, $1)=no
- ;;
- esac
- fi
-],
-[
- if test "$GCC" = yes; then
- _LT_AC_TAGVAR(lt_prog_compiler_wl, $1)='-Wl,'
- _LT_AC_TAGVAR(lt_prog_compiler_static, $1)='-static'
-
- case $host_os in
- aix*)
- # All AIX code is PIC.
- if test "$host_cpu" = ia64; then
- # AIX 5 now supports IA64 processor
- _LT_AC_TAGVAR(lt_prog_compiler_static, $1)='-Bstatic'
- fi
- ;;
-
- amigaos*)
- # FIXME: we need at least 68020 code to build shared libraries, but
- # adding the `-m68020' flag to GCC prevents building anything better,
- # like `-m68040'.
- _LT_AC_TAGVAR(lt_prog_compiler_pic, $1)='-m68020 -resident32 -malways-restore-a4'
- ;;
-
- beos* | irix5* | irix6* | nonstopux* | osf3* | osf4* | osf5*)
- # PIC is the default for these OSes.
- ;;
-
- mingw* | cygwin* | pw32* | os2*)
- # This hack is so that the source file can tell whether it is being
- # built for inclusion in a dll (and should export symbols for example).
- # Although the cygwin gcc ignores -fPIC, still need this for old-style
- # (--disable-auto-import) libraries
- m4_if([$1], [GCJ], [],
- [_LT_AC_TAGVAR(lt_prog_compiler_pic, $1)='-DDLL_EXPORT'])
- ;;
-
- darwin* | rhapsody*)
- # PIC is the default on this platform
- # Common symbols not allowed in MH_DYLIB files
- _LT_AC_TAGVAR(lt_prog_compiler_pic, $1)='-fno-common'
- ;;
-
- interix[[3-9]]*)
- # Interix 3.x gcc -fpic/-fPIC options generate broken code.
- # Instead, we relocate shared libraries at runtime.
- ;;
-
- msdosdjgpp*)
- # Just because we use GCC doesn't mean we suddenly get shared libraries
- # on systems that don't support them.
- _LT_AC_TAGVAR(lt_prog_compiler_can_build_shared, $1)=no
- enable_shared=no
- ;;
-
- sysv4*MP*)
- if test -d /usr/nec; then
- _LT_AC_TAGVAR(lt_prog_compiler_pic, $1)=-Kconform_pic
- fi
- ;;
-
- hpux*)
- # PIC is the default for IA64 HP-UX and 64-bit HP-UX, but
- # not for PA HP-UX.
- case $host_cpu in
- hppa*64*|ia64*)
- # +Z the default
- ;;
- *)
- _LT_AC_TAGVAR(lt_prog_compiler_pic, $1)='-fPIC'
- ;;
- esac
- ;;
-
- *)
- _LT_AC_TAGVAR(lt_prog_compiler_pic, $1)='-fPIC'
- ;;
- esac
- else
- # PORTME Check for flag to pass linker flags through the system compiler.
- case $host_os in
- aix*)
- _LT_AC_TAGVAR(lt_prog_compiler_wl, $1)='-Wl,'
- if test "$host_cpu" = ia64; then
- # AIX 5 now supports IA64 processor
- _LT_AC_TAGVAR(lt_prog_compiler_static, $1)='-Bstatic'
- else
- _LT_AC_TAGVAR(lt_prog_compiler_static, $1)='-bnso -bI:/lib/syscalls.exp'
- fi
- ;;
- darwin*)
- # PIC is the default on this platform
- # Common symbols not allowed in MH_DYLIB files
- case $cc_basename in
- xlc*)
- _LT_AC_TAGVAR(lt_prog_compiler_pic, $1)='-qnocommon'
- _LT_AC_TAGVAR(lt_prog_compiler_wl, $1)='-Wl,'
- ;;
- esac
- ;;
-
- mingw* | cygwin* | pw32* | os2*)
- # This hack is so that the source file can tell whether it is being
- # built for inclusion in a dll (and should export symbols for example).
- m4_if([$1], [GCJ], [],
- [_LT_AC_TAGVAR(lt_prog_compiler_pic, $1)='-DDLL_EXPORT'])
- ;;
-
- hpux9* | hpux10* | hpux11*)
- _LT_AC_TAGVAR(lt_prog_compiler_wl, $1)='-Wl,'
- # PIC is the default for IA64 HP-UX and 64-bit HP-UX, but
- # not for PA HP-UX.
- case $host_cpu in
- hppa*64*|ia64*)
- # +Z the default
- ;;
- *)
- _LT_AC_TAGVAR(lt_prog_compiler_pic, $1)='+Z'
- ;;
- esac
- # Is there a better lt_prog_compiler_static that works with the bundled CC?
- _LT_AC_TAGVAR(lt_prog_compiler_static, $1)='${wl}-a ${wl}archive'
- ;;
-
- irix5* | irix6* | nonstopux*)
- _LT_AC_TAGVAR(lt_prog_compiler_wl, $1)='-Wl,'
- # PIC (with -KPIC) is the default.
- _LT_AC_TAGVAR(lt_prog_compiler_static, $1)='-non_shared'
- ;;
-
- newsos6)
- _LT_AC_TAGVAR(lt_prog_compiler_pic, $1)='-KPIC'
- _LT_AC_TAGVAR(lt_prog_compiler_static, $1)='-Bstatic'
- ;;
-
- linux* | k*bsd*-gnu)
- case $cc_basename in
- icc* | ecc*)
- _LT_AC_TAGVAR(lt_prog_compiler_wl, $1)='-Wl,'
- _LT_AC_TAGVAR(lt_prog_compiler_pic, $1)='-KPIC'
- _LT_AC_TAGVAR(lt_prog_compiler_static, $1)='-static'
- ;;
- pgcc* | pgf77* | pgf90* | pgf95*)
- # Portland Group compilers (*not* the Pentium gcc compiler,
- # which looks to be a dead project)
- _LT_AC_TAGVAR(lt_prog_compiler_wl, $1)='-Wl,'
- _LT_AC_TAGVAR(lt_prog_compiler_pic, $1)='-fpic'
- _LT_AC_TAGVAR(lt_prog_compiler_static, $1)='-Bstatic'
- ;;
- ccc*)
- _LT_AC_TAGVAR(lt_prog_compiler_wl, $1)='-Wl,'
- # All Alpha code is PIC.
- _LT_AC_TAGVAR(lt_prog_compiler_static, $1)='-non_shared'
- ;;
- *)
- case `$CC -V 2>&1 | sed 5q` in
- *Sun\ C*)
- # Sun C 5.9
- _LT_AC_TAGVAR(lt_prog_compiler_pic, $1)='-KPIC'
- _LT_AC_TAGVAR(lt_prog_compiler_static, $1)='-Bstatic'
- _LT_AC_TAGVAR(lt_prog_compiler_wl, $1)='-Wl,'
- ;;
- *Sun\ F*)
- # Sun Fortran 8.3 passes all unrecognized flags to the linker
- _LT_AC_TAGVAR(lt_prog_compiler_pic, $1)='-KPIC'
- _LT_AC_TAGVAR(lt_prog_compiler_static, $1)='-Bstatic'
- _LT_AC_TAGVAR(lt_prog_compiler_wl, $1)=''
- ;;
- esac
- ;;
- esac
- ;;
-
- osf3* | osf4* | osf5*)
- _LT_AC_TAGVAR(lt_prog_compiler_wl, $1)='-Wl,'
- # All OSF/1 code is PIC.
- _LT_AC_TAGVAR(lt_prog_compiler_static, $1)='-non_shared'
- ;;
-
- rdos*)
- _LT_AC_TAGVAR(lt_prog_compiler_static, $1)='-non_shared'
- ;;
-
- solaris*)
- _LT_AC_TAGVAR(lt_prog_compiler_pic, $1)='-KPIC'
- _LT_AC_TAGVAR(lt_prog_compiler_static, $1)='-Bstatic'
- case $cc_basename in
- f77* | f90* | f95*)
- _LT_AC_TAGVAR(lt_prog_compiler_wl, $1)='-Qoption ld ';;
- *)
- _LT_AC_TAGVAR(lt_prog_compiler_wl, $1)='-Wl,';;
- esac
- ;;
-
- sunos4*)
- _LT_AC_TAGVAR(lt_prog_compiler_wl, $1)='-Qoption ld '
- _LT_AC_TAGVAR(lt_prog_compiler_pic, $1)='-PIC'
- _LT_AC_TAGVAR(lt_prog_compiler_static, $1)='-Bstatic'
- ;;
-
- sysv4 | sysv4.2uw2* | sysv4.3*)
- _LT_AC_TAGVAR(lt_prog_compiler_wl, $1)='-Wl,'
- _LT_AC_TAGVAR(lt_prog_compiler_pic, $1)='-KPIC'
- _LT_AC_TAGVAR(lt_prog_compiler_static, $1)='-Bstatic'
- ;;
-
- sysv4*MP*)
- if test -d /usr/nec ;then
- _LT_AC_TAGVAR(lt_prog_compiler_pic, $1)='-Kconform_pic'
- _LT_AC_TAGVAR(lt_prog_compiler_static, $1)='-Bstatic'
- fi
- ;;
-
- sysv5* | unixware* | sco3.2v5* | sco5v6* | OpenUNIX*)
- _LT_AC_TAGVAR(lt_prog_compiler_wl, $1)='-Wl,'
- _LT_AC_TAGVAR(lt_prog_compiler_pic, $1)='-KPIC'
- _LT_AC_TAGVAR(lt_prog_compiler_static, $1)='-Bstatic'
- ;;
-
- unicos*)
- _LT_AC_TAGVAR(lt_prog_compiler_wl, $1)='-Wl,'
- _LT_AC_TAGVAR(lt_prog_compiler_can_build_shared, $1)=no
- ;;
-
- uts4*)
- _LT_AC_TAGVAR(lt_prog_compiler_pic, $1)='-pic'
- _LT_AC_TAGVAR(lt_prog_compiler_static, $1)='-Bstatic'
- ;;
-
- *)
- _LT_AC_TAGVAR(lt_prog_compiler_can_build_shared, $1)=no
- ;;
- esac
- fi
-])
-AC_MSG_RESULT([$_LT_AC_TAGVAR(lt_prog_compiler_pic, $1)])
-
-#
-# Check to make sure the PIC flag actually works.
-#
-if test -n "$_LT_AC_TAGVAR(lt_prog_compiler_pic, $1)"; then
- AC_LIBTOOL_COMPILER_OPTION([if $compiler PIC flag $_LT_AC_TAGVAR(lt_prog_compiler_pic, $1) works],
- _LT_AC_TAGVAR(lt_cv_prog_compiler_pic_works, $1),
- [$_LT_AC_TAGVAR(lt_prog_compiler_pic, $1)ifelse([$1],[],[ -DPIC],[ifelse([$1],[CXX],[ -DPIC],[])])], [],
- [case $_LT_AC_TAGVAR(lt_prog_compiler_pic, $1) in
- "" | " "*) ;;
- *) _LT_AC_TAGVAR(lt_prog_compiler_pic, $1)=" $_LT_AC_TAGVAR(lt_prog_compiler_pic, $1)" ;;
- esac],
- [_LT_AC_TAGVAR(lt_prog_compiler_pic, $1)=
- _LT_AC_TAGVAR(lt_prog_compiler_can_build_shared, $1)=no])
-fi
-case $host_os in
- # For platforms which do not support PIC, -DPIC is meaningless:
- *djgpp*)
- _LT_AC_TAGVAR(lt_prog_compiler_pic, $1)=
- ;;
- *)
- _LT_AC_TAGVAR(lt_prog_compiler_pic, $1)="$_LT_AC_TAGVAR(lt_prog_compiler_pic, $1)ifelse([$1],[],[ -DPIC],[ifelse([$1],[CXX],[ -DPIC],[])])"
- ;;
-esac
-
-#
-# Check to make sure the static flag actually works.
-#
-wl=$_LT_AC_TAGVAR(lt_prog_compiler_wl, $1) eval lt_tmp_static_flag=\"$_LT_AC_TAGVAR(lt_prog_compiler_static, $1)\"
-AC_LIBTOOL_LINKER_OPTION([if $compiler static flag $lt_tmp_static_flag works],
- _LT_AC_TAGVAR(lt_cv_prog_compiler_static_works, $1),
- $lt_tmp_static_flag,
- [],
- [_LT_AC_TAGVAR(lt_prog_compiler_static, $1)=])
-])
-
-
-# AC_LIBTOOL_PROG_LD_SHLIBS([TAGNAME])
-# ------------------------------------
-# See if the linker supports building shared libraries.
-AC_DEFUN([AC_LIBTOOL_PROG_LD_SHLIBS],
-[AC_REQUIRE([LT_AC_PROG_SED])dnl
-AC_MSG_CHECKING([whether the $compiler linker ($LD) supports shared libraries])
-ifelse([$1],[CXX],[
- _LT_AC_TAGVAR(export_symbols_cmds, $1)='$NM $libobjs $convenience | $global_symbol_pipe | $SED '\''s/.* //'\'' | sort | uniq > $export_symbols'
- case $host_os in
- aix[[4-9]]*)
- # If we're using GNU nm, then we don't want the "-C" option.
- # -C means demangle to AIX nm, but means don't demangle with GNU nm
- if $NM -V 2>&1 | grep 'GNU' > /dev/null; then
- _LT_AC_TAGVAR(export_symbols_cmds, $1)='$NM -Bpg $libobjs $convenience | awk '\''{ if (((\[$]2 == "T") || (\[$]2 == "D") || (\[$]2 == "B")) && ([substr](\[$]3,1,1) != ".")) { print \[$]3 } }'\'' | sort -u > $export_symbols'
- else
- _LT_AC_TAGVAR(export_symbols_cmds, $1)='$NM -BCpg $libobjs $convenience | awk '\''{ if (((\[$]2 == "T") || (\[$]2 == "D") || (\[$]2 == "B")) && ([substr](\[$]3,1,1) != ".")) { print \[$]3 } }'\'' | sort -u > $export_symbols'
- fi
- ;;
- pw32*)
- _LT_AC_TAGVAR(export_symbols_cmds, $1)="$ltdll_cmds"
- ;;
- cygwin* | mingw*)
- _LT_AC_TAGVAR(export_symbols_cmds, $1)='$NM $libobjs $convenience | $global_symbol_pipe | $SED -e '\''/^[[BCDGRS]][[ ]]/s/.*[[ ]]\([[^ ]]*\)/\1 DATA/;/^.*[[ ]]__nm__/s/^.*[[ ]]__nm__\([[^ ]]*\)[[ ]][[^ ]]*/\1 DATA/;/^I[[ ]]/d;/^[[AITW]][[ ]]/s/.*[[ ]]//'\'' | sort | uniq > $export_symbols'
- ;;
- *)
- _LT_AC_TAGVAR(export_symbols_cmds, $1)='$NM $libobjs $convenience | $global_symbol_pipe | $SED '\''s/.* //'\'' | sort | uniq > $export_symbols'
- ;;
- esac
- _LT_AC_TAGVAR(exclude_expsyms, $1)=['_GLOBAL_OFFSET_TABLE_|_GLOBAL__F[ID]_.*']
-],[
- runpath_var=
- _LT_AC_TAGVAR(allow_undefined_flag, $1)=
- _LT_AC_TAGVAR(enable_shared_with_static_runtimes, $1)=no
- _LT_AC_TAGVAR(archive_cmds, $1)=
- _LT_AC_TAGVAR(archive_expsym_cmds, $1)=
- _LT_AC_TAGVAR(old_archive_From_new_cmds, $1)=
- _LT_AC_TAGVAR(old_archive_from_expsyms_cmds, $1)=
- _LT_AC_TAGVAR(export_dynamic_flag_spec, $1)=
- _LT_AC_TAGVAR(whole_archive_flag_spec, $1)=
- _LT_AC_TAGVAR(thread_safe_flag_spec, $1)=
- _LT_AC_TAGVAR(hardcode_libdir_flag_spec, $1)=
- _LT_AC_TAGVAR(hardcode_libdir_flag_spec_ld, $1)=
- _LT_AC_TAGVAR(hardcode_libdir_separator, $1)=
- _LT_AC_TAGVAR(hardcode_direct, $1)=no
- _LT_AC_TAGVAR(hardcode_minus_L, $1)=no
- _LT_AC_TAGVAR(hardcode_shlibpath_var, $1)=unsupported
- _LT_AC_TAGVAR(link_all_deplibs, $1)=unknown
- _LT_AC_TAGVAR(hardcode_automatic, $1)=no
- _LT_AC_TAGVAR(module_cmds, $1)=
- _LT_AC_TAGVAR(module_expsym_cmds, $1)=
- _LT_AC_TAGVAR(always_export_symbols, $1)=no
- _LT_AC_TAGVAR(export_symbols_cmds, $1)='$NM $libobjs $convenience | $global_symbol_pipe | $SED '\''s/.* //'\'' | sort | uniq > $export_symbols'
- # include_expsyms should be a list of space-separated symbols to be *always*
- # included in the symbol list
- _LT_AC_TAGVAR(include_expsyms, $1)=
- # exclude_expsyms can be an extended regexp of symbols to exclude
- # it will be wrapped by ` (' and `)$', so one must not match beginning or
- # end of line. Example: `a|bc|.*d.*' will exclude the symbols `a' and `bc',
- # as well as any symbol that contains `d'.
- _LT_AC_TAGVAR(exclude_expsyms, $1)=['_GLOBAL_OFFSET_TABLE_|_GLOBAL__F[ID]_.*']
- # Although _GLOBAL_OFFSET_TABLE_ is a valid symbol C name, most a.out
- # platforms (ab)use it in PIC code, but their linkers get confused if
- # the symbol is explicitly referenced. Since portable code cannot
- # rely on this symbol name, it's probably fine to never include it in
- # preloaded symbol tables.
- # Exclude shared library initialization/finalization symbols.
-dnl Note also adjust exclude_expsyms for C++ above.
- extract_expsyms_cmds=
- # Just being paranoid about ensuring that cc_basename is set.
- _LT_CC_BASENAME([$compiler])
- case $host_os in
- cygwin* | mingw* | pw32*)
- # FIXME: the MSVC++ port hasn't been tested in a loooong time
- # When not using gcc, we currently assume that we are using
- # Microsoft Visual C++.
- if test "$GCC" != yes; then
- with_gnu_ld=no
- fi
- ;;
- interix*)
- # we just hope/assume this is gcc and not c89 (= MSVC++)
- with_gnu_ld=yes
- ;;
- openbsd*)
- with_gnu_ld=no
- ;;
- esac
-
- _LT_AC_TAGVAR(ld_shlibs, $1)=yes
- if test "$with_gnu_ld" = yes; then
- # If archive_cmds runs LD, not CC, wlarc should be empty
- wlarc='${wl}'
-
- # Set some defaults for GNU ld with shared library support. These
- # are reset later if shared libraries are not supported. Putting them
- # here allows them to be overridden if necessary.
- runpath_var=LD_RUN_PATH
- _LT_AC_TAGVAR(hardcode_libdir_flag_spec, $1)='${wl}--rpath ${wl}$libdir'
- _LT_AC_TAGVAR(export_dynamic_flag_spec, $1)='${wl}--export-dynamic'
- # ancient GNU ld didn't support --whole-archive et. al.
- if $LD --help 2>&1 | grep 'no-whole-archive' > /dev/null; then
- _LT_AC_TAGVAR(whole_archive_flag_spec, $1)="$wlarc"'--whole-archive$convenience '"$wlarc"'--no-whole-archive'
- else
- _LT_AC_TAGVAR(whole_archive_flag_spec, $1)=
- fi
- supports_anon_versioning=no
- case `$LD -v 2>/dev/null` in
- *\ [[01]].* | *\ 2.[[0-9]].* | *\ 2.10.*) ;; # catch versions < 2.11
- *\ 2.11.93.0.2\ *) supports_anon_versioning=yes ;; # RH7.3 ...
- *\ 2.11.92.0.12\ *) supports_anon_versioning=yes ;; # Mandrake 8.2 ...
- *\ 2.11.*) ;; # other 2.11 versions
- *) supports_anon_versioning=yes ;;
- esac
-
- # See if GNU ld supports shared libraries.
- case $host_os in
- aix[[3-9]]*)
- # On AIX/PPC, the GNU linker is very broken
- if test "$host_cpu" != ia64; then
- _LT_AC_TAGVAR(ld_shlibs, $1)=no
- cat <<EOF 1>&2
-
-*** Warning: the GNU linker, at least up to release 2.9.1, is reported
-*** to be unable to reliably create shared libraries on AIX.
-*** Therefore, libtool is disabling shared libraries support. If you
-*** really care for shared libraries, you may want to modify your PATH
-*** so that a non-GNU linker is found, and then restart.
-
-EOF
- fi
- ;;
-
- amigaos*)
- _LT_AC_TAGVAR(archive_cmds, $1)='$rm $output_objdir/a2ixlibrary.data~$echo "#define NAME $libname" > $output_objdir/a2ixlibrary.data~$echo "#define LIBRARY_ID 1" >> $output_objdir/a2ixlibrary.data~$echo "#define VERSION $major" >> $output_objdir/a2ixlibrary.data~$echo "#define REVISION $revision" >> $output_objdir/a2ixlibrary.data~$AR $AR_FLAGS $lib $libobjs~$RANLIB $lib~(cd $output_objdir && a2ixlibrary -32)'
- _LT_AC_TAGVAR(hardcode_libdir_flag_spec, $1)='-L$libdir'
- _LT_AC_TAGVAR(hardcode_minus_L, $1)=yes
-
- # Samuel A. Falvo II <kc5tja@dolphin.openprojects.net> reports
- # that the semantics of dynamic libraries on AmigaOS, at least up
- # to version 4, is to share data among multiple programs linked
- # with the same dynamic library. Since this doesn't match the
- # behavior of shared libraries on other platforms, we can't use
- # them.
- _LT_AC_TAGVAR(ld_shlibs, $1)=no
- ;;
-
- beos*)
- if $LD --help 2>&1 | grep ': supported targets:.* elf' > /dev/null; then
- _LT_AC_TAGVAR(allow_undefined_flag, $1)=unsupported
- # Joseph Beckenbach <jrb3@best.com> says some releases of gcc
- # support --undefined. This deserves some investigation. FIXME
- _LT_AC_TAGVAR(archive_cmds, $1)='$CC -nostart $libobjs $deplibs $compiler_flags ${wl}-soname $wl$soname -o $lib'
- else
- _LT_AC_TAGVAR(ld_shlibs, $1)=no
- fi
- ;;
-
- cygwin* | mingw* | pw32*)
- # _LT_AC_TAGVAR(hardcode_libdir_flag_spec, $1) is actually meaningless,
- # as there is no search path for DLLs.
- _LT_AC_TAGVAR(hardcode_libdir_flag_spec, $1)='-L$libdir'
- _LT_AC_TAGVAR(allow_undefined_flag, $1)=unsupported
- _LT_AC_TAGVAR(always_export_symbols, $1)=no
- _LT_AC_TAGVAR(enable_shared_with_static_runtimes, $1)=yes
- _LT_AC_TAGVAR(export_symbols_cmds, $1)='$NM $libobjs $convenience | $global_symbol_pipe | $SED -e '\''/^[[BCDGRS]][[ ]]/s/.*[[ ]]\([[^ ]]*\)/\1 DATA/'\'' -e '\''/^[[AITW]][[ ]]/s/.*[[ ]]//'\'' | sort | uniq > $export_symbols'
-
- if $LD --help 2>&1 | grep 'auto-import' > /dev/null; then
- _LT_AC_TAGVAR(archive_cmds, $1)='$CC -shared $libobjs $deplibs $compiler_flags -o $output_objdir/$soname ${wl}--enable-auto-image-base -Xlinker --out-implib -Xlinker $lib'
- # If the export-symbols file already is a .def file (1st line
- # is EXPORTS), use it as is; otherwise, prepend...
- _LT_AC_TAGVAR(archive_expsym_cmds, $1)='if test "x`$SED 1q $export_symbols`" = xEXPORTS; then
- cp $export_symbols $output_objdir/$soname.def;
- else
- echo EXPORTS > $output_objdir/$soname.def;
- cat $export_symbols >> $output_objdir/$soname.def;
- fi~
- $CC -shared $output_objdir/$soname.def $libobjs $deplibs $compiler_flags -o $output_objdir/$soname ${wl}--enable-auto-image-base -Xlinker --out-implib -Xlinker $lib'
- else
- _LT_AC_TAGVAR(ld_shlibs, $1)=no
- fi
- ;;
-
- interix[[3-9]]*)
- _LT_AC_TAGVAR(hardcode_direct, $1)=no
- _LT_AC_TAGVAR(hardcode_shlibpath_var, $1)=no
- _LT_AC_TAGVAR(hardcode_libdir_flag_spec, $1)='${wl}-rpath,$libdir'
- _LT_AC_TAGVAR(export_dynamic_flag_spec, $1)='${wl}-E'
- # Hack: On Interix 3.x, we cannot compile PIC because of a broken gcc.
- # Instead, shared libraries are loaded at an image base (0x10000000 by
- # default) and relocated if they conflict, which is a slow very memory
- # consuming and fragmenting process. To avoid this, we pick a random,
- # 256 KiB-aligned image base between 0x50000000 and 0x6FFC0000 at link
- # time. Moving up from 0x10000000 also allows more sbrk(2) space.
- _LT_AC_TAGVAR(archive_cmds, $1)='$CC -shared $pic_flag $libobjs $deplibs $compiler_flags ${wl}-h,$soname ${wl}--image-base,`expr ${RANDOM-$$} % 4096 / 2 \* 262144 + 1342177280` -o $lib'
- _LT_AC_TAGVAR(archive_expsym_cmds, $1)='sed "s,^,_," $export_symbols >$output_objdir/$soname.expsym~$CC -shared $pic_flag $libobjs $deplibs $compiler_flags ${wl}-h,$soname ${wl}--retain-symbols-file,$output_objdir/$soname.expsym ${wl}--image-base,`expr ${RANDOM-$$} % 4096 / 2 \* 262144 + 1342177280` -o $lib'
- ;;
-
- gnu* | linux* | k*bsd*-gnu)
- if $LD --help 2>&1 | grep ': supported targets:.* elf' > /dev/null; then
- tmp_addflag=
- case $cc_basename,$host_cpu in
- pgcc*) # Portland Group C compiler
- _LT_AC_TAGVAR(whole_archive_flag_spec, $1)='${wl}--whole-archive`for conv in $convenience\"\"; do test -n \"$conv\" && new_convenience=\"$new_convenience,$conv\"; done; $echo \"$new_convenience\"` ${wl}--no-whole-archive'
- tmp_addflag=' $pic_flag'
- ;;
- pgf77* | pgf90* | pgf95*) # Portland Group f77 and f90 compilers
- _LT_AC_TAGVAR(whole_archive_flag_spec, $1)='${wl}--whole-archive`for conv in $convenience\"\"; do test -n \"$conv\" && new_convenience=\"$new_convenience,$conv\"; done; $echo \"$new_convenience\"` ${wl}--no-whole-archive'
- tmp_addflag=' $pic_flag -Mnomain' ;;
- ecc*,ia64* | icc*,ia64*) # Intel C compiler on ia64
- tmp_addflag=' -i_dynamic' ;;
- efc*,ia64* | ifort*,ia64*) # Intel Fortran compiler on ia64
- tmp_addflag=' -i_dynamic -nofor_main' ;;
- ifc* | ifort*) # Intel Fortran compiler
- tmp_addflag=' -nofor_main' ;;
- esac
- case `$CC -V 2>&1 | sed 5q` in
- *Sun\ C*) # Sun C 5.9
- _LT_AC_TAGVAR(whole_archive_flag_spec, $1)='${wl}--whole-archive`new_convenience=; for conv in $convenience\"\"; do test -z \"$conv\" || new_convenience=\"$new_convenience,$conv\"; done; $echo \"$new_convenience\"` ${wl}--no-whole-archive'
- tmp_sharedflag='-G' ;;
- *Sun\ F*) # Sun Fortran 8.3
- tmp_sharedflag='-G' ;;
- *)
- tmp_sharedflag='-shared' ;;
- esac
- _LT_AC_TAGVAR(archive_cmds, $1)='$CC '"$tmp_sharedflag""$tmp_addflag"' $libobjs $deplibs $compiler_flags ${wl}-soname $wl$soname -o $lib'
-
- if test $supports_anon_versioning = yes; then
- _LT_AC_TAGVAR(archive_expsym_cmds, $1)='$echo "{ global:" > $output_objdir/$libname.ver~
- cat $export_symbols | sed -e "s/\(.*\)/\1;/" >> $output_objdir/$libname.ver~
- $echo "local: *; };" >> $output_objdir/$libname.ver~
- $CC '"$tmp_sharedflag""$tmp_addflag"' $libobjs $deplibs $compiler_flags ${wl}-soname $wl$soname ${wl}-version-script ${wl}$output_objdir/$libname.ver -o $lib'
- fi
- else
- _LT_AC_TAGVAR(ld_shlibs, $1)=no
- fi
- ;;
-
- netbsd*)
- if echo __ELF__ | $CC -E - | grep __ELF__ >/dev/null; then
- _LT_AC_TAGVAR(archive_cmds, $1)='$LD -Bshareable $libobjs $deplibs $linker_flags -o $lib'
- wlarc=
- else
- _LT_AC_TAGVAR(archive_cmds, $1)='$CC -shared $libobjs $deplibs $compiler_flags ${wl}-soname $wl$soname -o $lib'
- _LT_AC_TAGVAR(archive_expsym_cmds, $1)='$CC -shared $libobjs $deplibs $compiler_flags ${wl}-soname $wl$soname ${wl}-retain-symbols-file $wl$export_symbols -o $lib'
- fi
- ;;
-
- solaris*)
- if $LD -v 2>&1 | grep 'BFD 2\.8' > /dev/null; then
- _LT_AC_TAGVAR(ld_shlibs, $1)=no
- cat <<EOF 1>&2
-
-*** Warning: The releases 2.8.* of the GNU linker cannot reliably
-*** create shared libraries on Solaris systems. Therefore, libtool
-*** is disabling shared libraries support. We urge you to upgrade GNU
-*** binutils to release 2.9.1 or newer. Another option is to modify
-*** your PATH or compiler configuration so that the native linker is
-*** used, and then restart.
-
-EOF
- elif $LD --help 2>&1 | grep ': supported targets:.* elf' > /dev/null; then
- _LT_AC_TAGVAR(archive_cmds, $1)='$CC -shared $libobjs $deplibs $compiler_flags ${wl}-soname $wl$soname -o $lib'
- _LT_AC_TAGVAR(archive_expsym_cmds, $1)='$CC -shared $libobjs $deplibs $compiler_flags ${wl}-soname $wl$soname ${wl}-retain-symbols-file $wl$export_symbols -o $lib'
- else
- _LT_AC_TAGVAR(ld_shlibs, $1)=no
- fi
- ;;
-
- sysv5* | sco3.2v5* | sco5v6* | unixware* | OpenUNIX*)
- case `$LD -v 2>&1` in
- *\ [[01]].* | *\ 2.[[0-9]].* | *\ 2.1[[0-5]].*)
- _LT_AC_TAGVAR(ld_shlibs, $1)=no
- cat <<_LT_EOF 1>&2
-
-*** Warning: Releases of the GNU linker prior to 2.16.91.0.3 can not
-*** reliably create shared libraries on SCO systems. Therefore, libtool
-*** is disabling shared libraries support. We urge you to upgrade GNU
-*** binutils to release 2.16.91.0.3 or newer. Another option is to modify
-*** your PATH or compiler configuration so that the native linker is
-*** used, and then restart.
-
-_LT_EOF
- ;;
- *)
- if $LD --help 2>&1 | grep ': supported targets:.* elf' > /dev/null; then
- _LT_AC_TAGVAR(hardcode_libdir_flag_spec, $1)='`test -z "$SCOABSPATH" && echo ${wl}-rpath,$libdir`'
- _LT_AC_TAGVAR(archive_cmds, $1)='$CC -shared $libobjs $deplibs $compiler_flags ${wl}-soname,\${SCOABSPATH:+${install_libdir}/}$soname -o $lib'
- _LT_AC_TAGVAR(archive_expsym_cmds, $1)='$CC -shared $libobjs $deplibs $compiler_flags ${wl}-soname,\${SCOABSPATH:+${install_libdir}/}$soname,-retain-symbols-file,$export_symbols -o $lib'
- else
- _LT_AC_TAGVAR(ld_shlibs, $1)=no
- fi
- ;;
- esac
- ;;
-
- sunos4*)
- _LT_AC_TAGVAR(archive_cmds, $1)='$LD -assert pure-text -Bshareable -o $lib $libobjs $deplibs $linker_flags'
- wlarc=
- _LT_AC_TAGVAR(hardcode_direct, $1)=yes
- _LT_AC_TAGVAR(hardcode_shlibpath_var, $1)=no
- ;;
-
- *)
- if $LD --help 2>&1 | grep ': supported targets:.* elf' > /dev/null; then
- _LT_AC_TAGVAR(archive_cmds, $1)='$CC -shared $libobjs $deplibs $compiler_flags ${wl}-soname $wl$soname -o $lib'
- _LT_AC_TAGVAR(archive_expsym_cmds, $1)='$CC -shared $libobjs $deplibs $compiler_flags ${wl}-soname $wl$soname ${wl}-retain-symbols-file $wl$export_symbols -o $lib'
- else
- _LT_AC_TAGVAR(ld_shlibs, $1)=no
- fi
- ;;
- esac
-
- if test "$_LT_AC_TAGVAR(ld_shlibs, $1)" = no; then
- runpath_var=
- _LT_AC_TAGVAR(hardcode_libdir_flag_spec, $1)=
- _LT_AC_TAGVAR(export_dynamic_flag_spec, $1)=
- _LT_AC_TAGVAR(whole_archive_flag_spec, $1)=
- fi
- else
- # PORTME fill in a description of your system's linker (not GNU ld)
- case $host_os in
- aix3*)
- _LT_AC_TAGVAR(allow_undefined_flag, $1)=unsupported
- _LT_AC_TAGVAR(always_export_symbols, $1)=yes
- _LT_AC_TAGVAR(archive_expsym_cmds, $1)='$LD -o $output_objdir/$soname $libobjs $deplibs $linker_flags -bE:$export_symbols -T512 -H512 -bM:SRE~$AR $AR_FLAGS $lib $output_objdir/$soname'
- # Note: this linker hardcodes the directories in LIBPATH if there
- # are no directories specified by -L.
- _LT_AC_TAGVAR(hardcode_minus_L, $1)=yes
- if test "$GCC" = yes && test -z "$lt_prog_compiler_static"; then
- # Neither direct hardcoding nor static linking is supported with a
- # broken collect2.
- _LT_AC_TAGVAR(hardcode_direct, $1)=unsupported
- fi
- ;;
-
- aix[[4-9]]*)
- if test "$host_cpu" = ia64; then
- # On IA64, the linker does run time linking by default, so we don't
- # have to do anything special.
- aix_use_runtimelinking=no
- exp_sym_flag='-Bexport'
- no_entry_flag=""
- else
- # If we're using GNU nm, then we don't want the "-C" option.
- # -C means demangle to AIX nm, but means don't demangle with GNU nm
- if $NM -V 2>&1 | grep 'GNU' > /dev/null; then
- _LT_AC_TAGVAR(export_symbols_cmds, $1)='$NM -Bpg $libobjs $convenience | awk '\''{ if (((\[$]2 == "T") || (\[$]2 == "D") || (\[$]2 == "B")) && ([substr](\[$]3,1,1) != ".")) { print \[$]3 } }'\'' | sort -u > $export_symbols'
- else
- _LT_AC_TAGVAR(export_symbols_cmds, $1)='$NM -BCpg $libobjs $convenience | awk '\''{ if (((\[$]2 == "T") || (\[$]2 == "D") || (\[$]2 == "B")) && ([substr](\[$]3,1,1) != ".")) { print \[$]3 } }'\'' | sort -u > $export_symbols'
- fi
- aix_use_runtimelinking=no
-
- # Test if we are trying to use run time linking or normal
- # AIX style linking. If -brtl is somewhere in LDFLAGS, we
- # need to do runtime linking.
- case $host_os in aix4.[[23]]|aix4.[[23]].*|aix[[5-9]]*)
- for ld_flag in $LDFLAGS; do
- if (test $ld_flag = "-brtl" || test $ld_flag = "-Wl,-brtl"); then
- aix_use_runtimelinking=yes
- break
- fi
- done
- ;;
- esac
-
- exp_sym_flag='-bexport'
- no_entry_flag='-bnoentry'
- fi
-
- # When large executables or shared objects are built, AIX ld can
- # have problems creating the table of contents. If linking a library
- # or program results in "error TOC overflow" add -mminimal-toc to
- # CXXFLAGS/CFLAGS for g++/gcc. In the cases where that is not
- # enough to fix the problem, add -Wl,-bbigtoc to LDFLAGS.
-
- _LT_AC_TAGVAR(archive_cmds, $1)=''
- _LT_AC_TAGVAR(hardcode_direct, $1)=yes
- _LT_AC_TAGVAR(hardcode_libdir_separator, $1)=':'
- _LT_AC_TAGVAR(link_all_deplibs, $1)=yes
-
- if test "$GCC" = yes; then
- case $host_os in aix4.[[012]]|aix4.[[012]].*)
- # We only want to do this on AIX 4.2 and lower, the check
- # below for broken collect2 doesn't work under 4.3+
- collect2name=`${CC} -print-prog-name=collect2`
- if test -f "$collect2name" && \
- strings "$collect2name" | grep resolve_lib_name >/dev/null
- then
- # We have reworked collect2
- :
- else
- # We have old collect2
- _LT_AC_TAGVAR(hardcode_direct, $1)=unsupported
- # It fails to find uninstalled libraries when the uninstalled
- # path is not listed in the libpath. Setting hardcode_minus_L
- # to unsupported forces relinking
- _LT_AC_TAGVAR(hardcode_minus_L, $1)=yes
- _LT_AC_TAGVAR(hardcode_libdir_flag_spec, $1)='-L$libdir'
- _LT_AC_TAGVAR(hardcode_libdir_separator, $1)=
- fi
- ;;
- esac
- shared_flag='-shared'
- if test "$aix_use_runtimelinking" = yes; then
- shared_flag="$shared_flag "'${wl}-G'
- fi
- else
- # not using gcc
- if test "$host_cpu" = ia64; then
- # VisualAge C++, Version 5.5 for AIX 5L for IA-64, Beta 3 Release
- # chokes on -Wl,-G. The following line is correct:
- shared_flag='-G'
- else
- if test "$aix_use_runtimelinking" = yes; then
- shared_flag='${wl}-G'
- else
- shared_flag='${wl}-bM:SRE'
- fi
- fi
- fi
-
- # It seems that -bexpall does not export symbols beginning with
- # underscore (_), so it is better to generate a list of symbols to export.
- _LT_AC_TAGVAR(always_export_symbols, $1)=yes
- if test "$aix_use_runtimelinking" = yes; then
- # Warning - without using the other runtime loading flags (-brtl),
- # -berok will link without error, but may produce a broken library.
- _LT_AC_TAGVAR(allow_undefined_flag, $1)='-berok'
- # Determine the default libpath from the value encoded in an empty executable.
- _LT_AC_SYS_LIBPATH_AIX
- _LT_AC_TAGVAR(hardcode_libdir_flag_spec, $1)='${wl}-blibpath:$libdir:'"$aix_libpath"
- _LT_AC_TAGVAR(archive_expsym_cmds, $1)="\$CC"' -o $output_objdir/$soname $libobjs $deplibs '"\${wl}$no_entry_flag"' $compiler_flags `if test "x${allow_undefined_flag}" != "x"; then echo "${wl}${allow_undefined_flag}"; else :; fi` '"\${wl}$exp_sym_flag:\$export_symbols $shared_flag"
- else
- if test "$host_cpu" = ia64; then
- _LT_AC_TAGVAR(hardcode_libdir_flag_spec, $1)='${wl}-R $libdir:/usr/lib:/lib'
- _LT_AC_TAGVAR(allow_undefined_flag, $1)="-z nodefs"
- _LT_AC_TAGVAR(archive_expsym_cmds, $1)="\$CC $shared_flag"' -o $output_objdir/$soname $libobjs $deplibs '"\${wl}$no_entry_flag"' $compiler_flags ${wl}${allow_undefined_flag} '"\${wl}$exp_sym_flag:\$export_symbols"
- else
- # Determine the default libpath from the value encoded in an empty executable.
- _LT_AC_SYS_LIBPATH_AIX
- _LT_AC_TAGVAR(hardcode_libdir_flag_spec, $1)='${wl}-blibpath:$libdir:'"$aix_libpath"
- # Warning - without using the other run time loading flags,
- # -berok will link without error, but may produce a broken library.
- _LT_AC_TAGVAR(no_undefined_flag, $1)=' ${wl}-bernotok'
- _LT_AC_TAGVAR(allow_undefined_flag, $1)=' ${wl}-berok'
- # Exported symbols can be pulled into shared objects from archives
- _LT_AC_TAGVAR(whole_archive_flag_spec, $1)='$convenience'
- _LT_AC_TAGVAR(archive_cmds_need_lc, $1)=yes
- # This is similar to how AIX traditionally builds its shared libraries.
- _LT_AC_TAGVAR(archive_expsym_cmds, $1)="\$CC $shared_flag"' -o $output_objdir/$soname $libobjs $deplibs ${wl}-bnoentry $compiler_flags ${wl}-bE:$export_symbols${allow_undefined_flag}~$AR $AR_FLAGS $output_objdir/$libname$release.a $output_objdir/$soname'
- fi
- fi
- ;;
-
- amigaos*)
- _LT_AC_TAGVAR(archive_cmds, $1)='$rm $output_objdir/a2ixlibrary.data~$echo "#define NAME $libname" > $output_objdir/a2ixlibrary.data~$echo "#define LIBRARY_ID 1" >> $output_objdir/a2ixlibrary.data~$echo "#define VERSION $major" >> $output_objdir/a2ixlibrary.data~$echo "#define REVISION $revision" >> $output_objdir/a2ixlibrary.data~$AR $AR_FLAGS $lib $libobjs~$RANLIB $lib~(cd $output_objdir && a2ixlibrary -32)'
- _LT_AC_TAGVAR(hardcode_libdir_flag_spec, $1)='-L$libdir'
- _LT_AC_TAGVAR(hardcode_minus_L, $1)=yes
- # see comment about different semantics on the GNU ld section
- _LT_AC_TAGVAR(ld_shlibs, $1)=no
- ;;
-
- bsdi[[45]]*)
- _LT_AC_TAGVAR(export_dynamic_flag_spec, $1)=-rdynamic
- ;;
-
- cygwin* | mingw* | pw32*)
- # When not using gcc, we currently assume that we are using
- # Microsoft Visual C++.
- # hardcode_libdir_flag_spec is actually meaningless, as there is
- # no search path for DLLs.
- _LT_AC_TAGVAR(hardcode_libdir_flag_spec, $1)=' '
- _LT_AC_TAGVAR(allow_undefined_flag, $1)=unsupported
- # Tell ltmain to make .lib files, not .a files.
- libext=lib
- # Tell ltmain to make .dll files, not .so files.
- shrext_cmds=".dll"
- # FIXME: Setting linknames here is a bad hack.
- _LT_AC_TAGVAR(archive_cmds, $1)='$CC -o $lib $libobjs $compiler_flags `echo "$deplibs" | $SED -e '\''s/ -lc$//'\''` -link -dll~linknames='
- # The linker will automatically build a .lib file if we build a DLL.
- _LT_AC_TAGVAR(old_archive_From_new_cmds, $1)='true'
- # FIXME: Should let the user specify the lib program.
- _LT_AC_TAGVAR(old_archive_cmds, $1)='lib -OUT:$oldlib$oldobjs$old_deplibs'
- _LT_AC_TAGVAR(fix_srcfile_path, $1)='`cygpath -w "$srcfile"`'
- _LT_AC_TAGVAR(enable_shared_with_static_runtimes, $1)=yes
- ;;
-
- darwin* | rhapsody*)
- case $host_os in
- rhapsody* | darwin1.[[012]])
- _LT_AC_TAGVAR(allow_undefined_flag, $1)='${wl}-undefined ${wl}suppress'
- ;;
- *) # Darwin 1.3 on
- if test -z ${MACOSX_DEPLOYMENT_TARGET} ; then
- _LT_AC_TAGVAR(allow_undefined_flag, $1)='${wl}-flat_namespace ${wl}-undefined ${wl}suppress'
- else
- case ${MACOSX_DEPLOYMENT_TARGET} in
- 10.[[012]])
- _LT_AC_TAGVAR(allow_undefined_flag, $1)='${wl}-flat_namespace ${wl}-undefined ${wl}suppress'
- ;;
- 10.*)
- _LT_AC_TAGVAR(allow_undefined_flag, $1)='${wl}-undefined ${wl}dynamic_lookup'
- ;;
- esac
- fi
- ;;
- esac
- _LT_AC_TAGVAR(archive_cmds_need_lc, $1)=no
- _LT_AC_TAGVAR(hardcode_direct, $1)=no
- _LT_AC_TAGVAR(hardcode_automatic, $1)=yes
- _LT_AC_TAGVAR(hardcode_shlibpath_var, $1)=unsupported
- _LT_AC_TAGVAR(whole_archive_flag_spec, $1)=''
- _LT_AC_TAGVAR(link_all_deplibs, $1)=yes
- if test "$GCC" = yes ; then
- output_verbose_link_cmd='echo'
- _LT_AC_TAGVAR(archive_cmds, $1)="\$CC -dynamiclib \$allow_undefined_flag -o \$lib \$libobjs \$deplibs \$compiler_flags -install_name \$rpath/\$soname \$verstring $_lt_dar_single_mod${_lt_dsymutil}"
- _LT_AC_TAGVAR(module_cmds, $1)="\$CC \$allow_undefined_flag -o \$lib -bundle \$libobjs \$deplibs \$compiler_flags${_lt_dsymutil}"
- _LT_AC_TAGVAR(archive_expsym_cmds, $1)="sed 's,^,_,' < \$export_symbols > \$output_objdir/\${libname}-symbols.expsym~\$CC -dynamiclib \$allow_undefined_flag -o \$lib \$libobjs \$deplibs \$compiler_flags -install_name \$rpath/\$soname \$verstring ${_lt_dar_single_mod}${_lt_dar_export_syms}${_lt_dsymutil}"
- _LT_AC_TAGVAR(module_expsym_cmds, $1)="sed -e 's,^,_,' < \$export_symbols > \$output_objdir/\${libname}-symbols.expsym~\$CC \$allow_undefined_flag -o \$lib -bundle \$libobjs \$deplibs \$compiler_flags${_lt_dar_export_syms}${_lt_dsymutil}"
- else
- case $cc_basename in
- xlc*)
- output_verbose_link_cmd='echo'
- _LT_AC_TAGVAR(archive_cmds, $1)='$CC -qmkshrobj $allow_undefined_flag -o $lib $libobjs $deplibs $compiler_flags ${wl}-install_name ${wl}`echo $rpath/$soname` $xlcverstring'
- _LT_AC_TAGVAR(module_cmds, $1)='$CC $allow_undefined_flag -o $lib -bundle $libobjs $deplibs$compiler_flags'
- # Don't fix this by using the ld -exported_symbols_list flag, it doesn't exist in older darwin lds
- _LT_AC_TAGVAR(archive_expsym_cmds, $1)='sed -e "s,#.*,," -e "s,^[ ]*,," -e "s,^\(..*\),_&," < $export_symbols > $output_objdir/${libname}-symbols.expsym~$CC -qmkshrobj $allow_undefined_flag -o $lib $libobjs $deplibs $compiler_flags ${wl}-install_name ${wl}$rpath/$soname $xlcverstring~nmedit -s $output_objdir/${libname}-symbols.expsym ${lib}'
- _LT_AC_TAGVAR(module_expsym_cmds, $1)='sed -e "s,#.*,," -e "s,^[ ]*,," -e "s,^\(..*\),_&," < $export_symbols > $output_objdir/${libname}-symbols.expsym~$CC $allow_undefined_flag -o $lib -bundle $libobjs $deplibs$compiler_flags~nmedit -s $output_objdir/${libname}-symbols.expsym ${lib}'
- ;;
- *)
- _LT_AC_TAGVAR(ld_shlibs, $1)=no
- ;;
- esac
- fi
- ;;
-
- dgux*)
- _LT_AC_TAGVAR(archive_cmds, $1)='$LD -G -h $soname -o $lib $libobjs $deplibs $linker_flags'
- _LT_AC_TAGVAR(hardcode_libdir_flag_spec, $1)='-L$libdir'
- _LT_AC_TAGVAR(hardcode_shlibpath_var, $1)=no
- ;;
-
- freebsd1*)
- _LT_AC_TAGVAR(ld_shlibs, $1)=no
- ;;
-
- # FreeBSD 2.2.[012] allows us to include c++rt0.o to get C++ constructor
- # support. Future versions do this automatically, but an explicit c++rt0.o
- # does not break anything, and helps significantly (at the cost of a little
- # extra space).
- freebsd2.2*)
- _LT_AC_TAGVAR(archive_cmds, $1)='$LD -Bshareable -o $lib $libobjs $deplibs $linker_flags /usr/lib/c++rt0.o'
- _LT_AC_TAGVAR(hardcode_libdir_flag_spec, $1)='-R$libdir'
- _LT_AC_TAGVAR(hardcode_direct, $1)=yes
- _LT_AC_TAGVAR(hardcode_shlibpath_var, $1)=no
- ;;
-
- # Unfortunately, older versions of FreeBSD 2 do not have this feature.
- freebsd2*)
- _LT_AC_TAGVAR(archive_cmds, $1)='$LD -Bshareable -o $lib $libobjs $deplibs $linker_flags'
- _LT_AC_TAGVAR(hardcode_direct, $1)=yes
- _LT_AC_TAGVAR(hardcode_minus_L, $1)=yes
- _LT_AC_TAGVAR(hardcode_shlibpath_var, $1)=no
- ;;
-
- # FreeBSD 3 and greater uses gcc -shared to do shared libraries.
- freebsd* | dragonfly*)
- _LT_AC_TAGVAR(archive_cmds, $1)='$CC -shared -o $lib $libobjs $deplibs $compiler_flags'
- _LT_AC_TAGVAR(hardcode_libdir_flag_spec, $1)='-R$libdir'
- _LT_AC_TAGVAR(hardcode_direct, $1)=yes
- _LT_AC_TAGVAR(hardcode_shlibpath_var, $1)=no
- ;;
-
- hpux9*)
- if test "$GCC" = yes; then
- _LT_AC_TAGVAR(archive_cmds, $1)='$rm $output_objdir/$soname~$CC -shared -fPIC ${wl}+b ${wl}$install_libdir -o $output_objdir/$soname $libobjs $deplibs $compiler_flags~test $output_objdir/$soname = $lib || mv $output_objdir/$soname $lib'
- else
- _LT_AC_TAGVAR(archive_cmds, $1)='$rm $output_objdir/$soname~$LD -b +b $install_libdir -o $output_objdir/$soname $libobjs $deplibs $linker_flags~test $output_objdir/$soname = $lib || mv $output_objdir/$soname $lib'
- fi
- _LT_AC_TAGVAR(hardcode_libdir_flag_spec, $1)='${wl}+b ${wl}$libdir'
- _LT_AC_TAGVAR(hardcode_libdir_separator, $1)=:
- _LT_AC_TAGVAR(hardcode_direct, $1)=yes
-
- # hardcode_minus_L: Not really in the search PATH,
- # but as the default location of the library.
- _LT_AC_TAGVAR(hardcode_minus_L, $1)=yes
- _LT_AC_TAGVAR(export_dynamic_flag_spec, $1)='${wl}-E'
- ;;
-
- hpux10*)
- if test "$GCC" = yes -a "$with_gnu_ld" = no; then
- _LT_AC_TAGVAR(archive_cmds, $1)='$CC -shared -fPIC ${wl}+h ${wl}$soname ${wl}+b ${wl}$install_libdir -o $lib $libobjs $deplibs $compiler_flags'
- else
- _LT_AC_TAGVAR(archive_cmds, $1)='$LD -b +h $soname +b $install_libdir -o $lib $libobjs $deplibs $linker_flags'
- fi
- if test "$with_gnu_ld" = no; then
- _LT_AC_TAGVAR(hardcode_libdir_flag_spec, $1)='${wl}+b ${wl}$libdir'
- _LT_AC_TAGVAR(hardcode_libdir_separator, $1)=:
-
- _LT_AC_TAGVAR(hardcode_direct, $1)=yes
- _LT_AC_TAGVAR(export_dynamic_flag_spec, $1)='${wl}-E'
-
- # hardcode_minus_L: Not really in the search PATH,
- # but as the default location of the library.
- _LT_AC_TAGVAR(hardcode_minus_L, $1)=yes
- fi
- ;;
-
- hpux11*)
- if test "$GCC" = yes -a "$with_gnu_ld" = no; then
- case $host_cpu in
- hppa*64*)
- _LT_AC_TAGVAR(archive_cmds, $1)='$CC -shared ${wl}+h ${wl}$soname -o $lib $libobjs $deplibs $compiler_flags'
- ;;
- ia64*)
- _LT_AC_TAGVAR(archive_cmds, $1)='$CC -shared ${wl}+h ${wl}$soname ${wl}+nodefaultrpath -o $lib $libobjs $deplibs $compiler_flags'
- ;;
- *)
- _LT_AC_TAGVAR(archive_cmds, $1)='$CC -shared -fPIC ${wl}+h ${wl}$soname ${wl}+b ${wl}$install_libdir -o $lib $libobjs $deplibs $compiler_flags'
- ;;
- esac
- else
- case $host_cpu in
- hppa*64*)
- _LT_AC_TAGVAR(archive_cmds, $1)='$CC -b ${wl}+h ${wl}$soname -o $lib $libobjs $deplibs $compiler_flags'
- ;;
- ia64*)
- _LT_AC_TAGVAR(archive_cmds, $1)='$CC -b ${wl}+h ${wl}$soname ${wl}+nodefaultrpath -o $lib $libobjs $deplibs $compiler_flags'
- ;;
- *)
- _LT_AC_TAGVAR(archive_cmds, $1)='$CC -b ${wl}+h ${wl}$soname ${wl}+b ${wl}$install_libdir -o $lib $libobjs $deplibs $compiler_flags'
- ;;
- esac
- fi
- if test "$with_gnu_ld" = no; then
- _LT_AC_TAGVAR(hardcode_libdir_flag_spec, $1)='${wl}+b ${wl}$libdir'
- _LT_AC_TAGVAR(hardcode_libdir_separator, $1)=:
-
- case $host_cpu in
- hppa*64*|ia64*)
- _LT_AC_TAGVAR(hardcode_libdir_flag_spec_ld, $1)='+b $libdir'
- _LT_AC_TAGVAR(hardcode_direct, $1)=no
- _LT_AC_TAGVAR(hardcode_shlibpath_var, $1)=no
- ;;
- *)
- _LT_AC_TAGVAR(hardcode_direct, $1)=yes
- _LT_AC_TAGVAR(export_dynamic_flag_spec, $1)='${wl}-E'
-
- # hardcode_minus_L: Not really in the search PATH,
- # but as the default location of the library.
- _LT_AC_TAGVAR(hardcode_minus_L, $1)=yes
- ;;
- esac
- fi
- ;;
-
- irix5* | irix6* | nonstopux*)
- if test "$GCC" = yes; then
- _LT_AC_TAGVAR(archive_cmds, $1)='$CC -shared $libobjs $deplibs $compiler_flags ${wl}-soname ${wl}$soname `test -n "$verstring" && echo ${wl}-set_version ${wl}$verstring` ${wl}-update_registry ${wl}${output_objdir}/so_locations -o $lib'
- else
- _LT_AC_TAGVAR(archive_cmds, $1)='$LD -shared $libobjs $deplibs $linker_flags -soname $soname `test -n "$verstring" && echo -set_version $verstring` -update_registry ${output_objdir}/so_locations -o $lib'
- _LT_AC_TAGVAR(hardcode_libdir_flag_spec_ld, $1)='-rpath $libdir'
- fi
- _LT_AC_TAGVAR(hardcode_libdir_flag_spec, $1)='${wl}-rpath ${wl}$libdir'
- _LT_AC_TAGVAR(hardcode_libdir_separator, $1)=:
- _LT_AC_TAGVAR(link_all_deplibs, $1)=yes
- ;;
-
- netbsd*)
- if echo __ELF__ | $CC -E - | grep __ELF__ >/dev/null; then
- _LT_AC_TAGVAR(archive_cmds, $1)='$LD -Bshareable -o $lib $libobjs $deplibs $linker_flags' # a.out
- else
- _LT_AC_TAGVAR(archive_cmds, $1)='$LD -shared -o $lib $libobjs $deplibs $linker_flags' # ELF
- fi
- _LT_AC_TAGVAR(hardcode_libdir_flag_spec, $1)='-R$libdir'
- _LT_AC_TAGVAR(hardcode_direct, $1)=yes
- _LT_AC_TAGVAR(hardcode_shlibpath_var, $1)=no
- ;;
-
- newsos6)
- _LT_AC_TAGVAR(archive_cmds, $1)='$LD -G -h $soname -o $lib $libobjs $deplibs $linker_flags'
- _LT_AC_TAGVAR(hardcode_direct, $1)=yes
- _LT_AC_TAGVAR(hardcode_libdir_flag_spec, $1)='${wl}-rpath ${wl}$libdir'
- _LT_AC_TAGVAR(hardcode_libdir_separator, $1)=:
- _LT_AC_TAGVAR(hardcode_shlibpath_var, $1)=no
- ;;
-
- openbsd*)
- if test -f /usr/libexec/ld.so; then
- _LT_AC_TAGVAR(hardcode_direct, $1)=yes
- _LT_AC_TAGVAR(hardcode_shlibpath_var, $1)=no
- if test -z "`echo __ELF__ | $CC -E - | grep __ELF__`" || test "$host_os-$host_cpu" = "openbsd2.8-powerpc"; then
- _LT_AC_TAGVAR(archive_cmds, $1)='$CC -shared $pic_flag -o $lib $libobjs $deplibs $compiler_flags'
- _LT_AC_TAGVAR(archive_expsym_cmds, $1)='$CC -shared $pic_flag -o $lib $libobjs $deplibs $compiler_flags ${wl}-retain-symbols-file,$export_symbols'
- _LT_AC_TAGVAR(hardcode_libdir_flag_spec, $1)='${wl}-rpath,$libdir'
- _LT_AC_TAGVAR(export_dynamic_flag_spec, $1)='${wl}-E'
- else
- case $host_os in
- openbsd[[01]].* | openbsd2.[[0-7]] | openbsd2.[[0-7]].*)
- _LT_AC_TAGVAR(archive_cmds, $1)='$LD -Bshareable -o $lib $libobjs $deplibs $linker_flags'
- _LT_AC_TAGVAR(hardcode_libdir_flag_spec, $1)='-R$libdir'
- ;;
- *)
- _LT_AC_TAGVAR(archive_cmds, $1)='$CC -shared $pic_flag -o $lib $libobjs $deplibs $compiler_flags'
- _LT_AC_TAGVAR(hardcode_libdir_flag_spec, $1)='${wl}-rpath,$libdir'
- ;;
- esac
- fi
- else
- _LT_AC_TAGVAR(ld_shlibs, $1)=no
- fi
- ;;
-
- os2*)
- _LT_AC_TAGVAR(hardcode_libdir_flag_spec, $1)='-L$libdir'
- _LT_AC_TAGVAR(hardcode_minus_L, $1)=yes
- _LT_AC_TAGVAR(allow_undefined_flag, $1)=unsupported
- _LT_AC_TAGVAR(archive_cmds, $1)='$echo "LIBRARY $libname INITINSTANCE" > $output_objdir/$libname.def~$echo "DESCRIPTION \"$libname\"" >> $output_objdir/$libname.def~$echo DATA >> $output_objdir/$libname.def~$echo " SINGLE NONSHARED" >> $output_objdir/$libname.def~$echo EXPORTS >> $output_objdir/$libname.def~emxexp $libobjs >> $output_objdir/$libname.def~$CC -Zdll -Zcrtdll -o $lib $libobjs $deplibs $compiler_flags $output_objdir/$libname.def'
- _LT_AC_TAGVAR(old_archive_From_new_cmds, $1)='emximp -o $output_objdir/$libname.a $output_objdir/$libname.def'
- ;;
-
- osf3*)
- if test "$GCC" = yes; then
- _LT_AC_TAGVAR(allow_undefined_flag, $1)=' ${wl}-expect_unresolved ${wl}\*'
- _LT_AC_TAGVAR(archive_cmds, $1)='$CC -shared${allow_undefined_flag} $libobjs $deplibs $compiler_flags ${wl}-soname ${wl}$soname `test -n "$verstring" && echo ${wl}-set_version ${wl}$verstring` ${wl}-update_registry ${wl}${output_objdir}/so_locations -o $lib'
- else
- _LT_AC_TAGVAR(allow_undefined_flag, $1)=' -expect_unresolved \*'
- _LT_AC_TAGVAR(archive_cmds, $1)='$LD -shared${allow_undefined_flag} $libobjs $deplibs $linker_flags -soname $soname `test -n "$verstring" && echo -set_version $verstring` -update_registry ${output_objdir}/so_locations -o $lib'
- fi
- _LT_AC_TAGVAR(hardcode_libdir_flag_spec, $1)='${wl}-rpath ${wl}$libdir'
- _LT_AC_TAGVAR(hardcode_libdir_separator, $1)=:
- ;;
-
- osf4* | osf5*) # as osf3* with the addition of -msym flag
- if test "$GCC" = yes; then
- _LT_AC_TAGVAR(allow_undefined_flag, $1)=' ${wl}-expect_unresolved ${wl}\*'
- _LT_AC_TAGVAR(archive_cmds, $1)='$CC -shared${allow_undefined_flag} $libobjs $deplibs $compiler_flags ${wl}-msym ${wl}-soname ${wl}$soname `test -n "$verstring" && echo ${wl}-set_version ${wl}$verstring` ${wl}-update_registry ${wl}${output_objdir}/so_locations -o $lib'
- _LT_AC_TAGVAR(hardcode_libdir_flag_spec, $1)='${wl}-rpath ${wl}$libdir'
- else
- _LT_AC_TAGVAR(allow_undefined_flag, $1)=' -expect_unresolved \*'
- _LT_AC_TAGVAR(archive_cmds, $1)='$LD -shared${allow_undefined_flag} $libobjs $deplibs $linker_flags -msym -soname $soname `test -n "$verstring" && echo -set_version $verstring` -update_registry ${output_objdir}/so_locations -o $lib'
- _LT_AC_TAGVAR(archive_expsym_cmds, $1)='for i in `cat $export_symbols`; do printf "%s %s\\n" -exported_symbol "\$i" >> $lib.exp; done; echo "-hidden">> $lib.exp~
- $LD -shared${allow_undefined_flag} -input $lib.exp $linker_flags $libobjs $deplibs -soname $soname `test -n "$verstring" && echo -set_version $verstring` -update_registry ${output_objdir}/so_locations -o $lib~$rm $lib.exp'
-
- # Both c and cxx compiler support -rpath directly
- _LT_AC_TAGVAR(hardcode_libdir_flag_spec, $1)='-rpath $libdir'
- fi
- _LT_AC_TAGVAR(hardcode_libdir_separator, $1)=:
- ;;
-
- solaris*)
- _LT_AC_TAGVAR(no_undefined_flag, $1)=' -z text'
- if test "$GCC" = yes; then
- wlarc='${wl}'
- _LT_AC_TAGVAR(archive_cmds, $1)='$CC -shared ${wl}-h ${wl}$soname -o $lib $libobjs $deplibs $compiler_flags'
- _LT_AC_TAGVAR(archive_expsym_cmds, $1)='$echo "{ global:" > $lib.exp~cat $export_symbols | $SED -e "s/\(.*\)/\1;/" >> $lib.exp~$echo "local: *; };" >> $lib.exp~
- $CC -shared ${wl}-M ${wl}$lib.exp ${wl}-h ${wl}$soname -o $lib $libobjs $deplibs $compiler_flags~$rm $lib.exp'
- else
- wlarc=''
- _LT_AC_TAGVAR(archive_cmds, $1)='$LD -G${allow_undefined_flag} -h $soname -o $lib $libobjs $deplibs $linker_flags'
- _LT_AC_TAGVAR(archive_expsym_cmds, $1)='$echo "{ global:" > $lib.exp~cat $export_symbols | $SED -e "s/\(.*\)/\1;/" >> $lib.exp~$echo "local: *; };" >> $lib.exp~
- $LD -G${allow_undefined_flag} -M $lib.exp -h $soname -o $lib $libobjs $deplibs $linker_flags~$rm $lib.exp'
- fi
- _LT_AC_TAGVAR(hardcode_libdir_flag_spec, $1)='-R$libdir'
- _LT_AC_TAGVAR(hardcode_shlibpath_var, $1)=no
- case $host_os in
- solaris2.[[0-5]] | solaris2.[[0-5]].*) ;;
- *)
- # The compiler driver will combine and reorder linker options,
- # but understands `-z linker_flag'. GCC discards it without `$wl',
- # but is careful enough not to reorder.
- # Supported since Solaris 2.6 (maybe 2.5.1?)
- if test "$GCC" = yes; then
- _LT_AC_TAGVAR(whole_archive_flag_spec, $1)='${wl}-z ${wl}allextract$convenience ${wl}-z ${wl}defaultextract'
- else
- _LT_AC_TAGVAR(whole_archive_flag_spec, $1)='-z allextract$convenience -z defaultextract'
- fi
- ;;
- esac
- _LT_AC_TAGVAR(link_all_deplibs, $1)=yes
- ;;
-
- sunos4*)
- if test "x$host_vendor" = xsequent; then
- # Use $CC to link under sequent, because it throws in some extra .o
- # files that make .init and .fini sections work.
- _LT_AC_TAGVAR(archive_cmds, $1)='$CC -G ${wl}-h $soname -o $lib $libobjs $deplibs $compiler_flags'
- else
- _LT_AC_TAGVAR(archive_cmds, $1)='$LD -assert pure-text -Bstatic -o $lib $libobjs $deplibs $linker_flags'
- fi
- _LT_AC_TAGVAR(hardcode_libdir_flag_spec, $1)='-L$libdir'
- _LT_AC_TAGVAR(hardcode_direct, $1)=yes
- _LT_AC_TAGVAR(hardcode_minus_L, $1)=yes
- _LT_AC_TAGVAR(hardcode_shlibpath_var, $1)=no
- ;;
-
- sysv4)
- case $host_vendor in
- sni)
- _LT_AC_TAGVAR(archive_cmds, $1)='$LD -G -h $soname -o $lib $libobjs $deplibs $linker_flags'
- _LT_AC_TAGVAR(hardcode_direct, $1)=yes # is this really true???
- ;;
- siemens)
- ## LD is ld it makes a PLAMLIB
- ## CC just makes a GrossModule.
- _LT_AC_TAGVAR(archive_cmds, $1)='$LD -G -o $lib $libobjs $deplibs $linker_flags'
- _LT_AC_TAGVAR(reload_cmds, $1)='$CC -r -o $output$reload_objs'
- _LT_AC_TAGVAR(hardcode_direct, $1)=no
- ;;
- motorola)
- _LT_AC_TAGVAR(archive_cmds, $1)='$LD -G -h $soname -o $lib $libobjs $deplibs $linker_flags'
- _LT_AC_TAGVAR(hardcode_direct, $1)=no #Motorola manual says yes, but my tests say they lie
- ;;
- esac
- runpath_var='LD_RUN_PATH'
- _LT_AC_TAGVAR(hardcode_shlibpath_var, $1)=no
- ;;
-
- sysv4.3*)
- _LT_AC_TAGVAR(archive_cmds, $1)='$LD -G -h $soname -o $lib $libobjs $deplibs $linker_flags'
- _LT_AC_TAGVAR(hardcode_shlibpath_var, $1)=no
- _LT_AC_TAGVAR(export_dynamic_flag_spec, $1)='-Bexport'
- ;;
-
- sysv4*MP*)
- if test -d /usr/nec; then
- _LT_AC_TAGVAR(archive_cmds, $1)='$LD -G -h $soname -o $lib $libobjs $deplibs $linker_flags'
- _LT_AC_TAGVAR(hardcode_shlibpath_var, $1)=no
- runpath_var=LD_RUN_PATH
- hardcode_runpath_var=yes
- _LT_AC_TAGVAR(ld_shlibs, $1)=yes
- fi
- ;;
-
- sysv4*uw2* | sysv5OpenUNIX* | sysv5UnixWare7.[[01]].[[10]]* | unixware7* | sco3.2v5.0.[[024]]*)
- _LT_AC_TAGVAR(no_undefined_flag, $1)='${wl}-z,text'
- _LT_AC_TAGVAR(archive_cmds_need_lc, $1)=no
- _LT_AC_TAGVAR(hardcode_shlibpath_var, $1)=no
- runpath_var='LD_RUN_PATH'
-
- if test "$GCC" = yes; then
- _LT_AC_TAGVAR(archive_cmds, $1)='$CC -shared ${wl}-h,$soname -o $lib $libobjs $deplibs $compiler_flags'
- _LT_AC_TAGVAR(archive_expsym_cmds, $1)='$CC -shared ${wl}-Bexport:$export_symbols ${wl}-h,$soname -o $lib $libobjs $deplibs $compiler_flags'
- else
- _LT_AC_TAGVAR(archive_cmds, $1)='$CC -G ${wl}-h,$soname -o $lib $libobjs $deplibs $compiler_flags'
- _LT_AC_TAGVAR(archive_expsym_cmds, $1)='$CC -G ${wl}-Bexport:$export_symbols ${wl}-h,$soname -o $lib $libobjs $deplibs $compiler_flags'
- fi
- ;;
-
- sysv5* | sco3.2v5* | sco5v6*)
- # Note: We can NOT use -z defs as we might desire, because we do not
- # link with -lc, and that would cause any symbols used from libc to
- # always be unresolved, which means just about no library would
- # ever link correctly. If we're not using GNU ld we use -z text
- # though, which does catch some bad symbols but isn't as heavy-handed
- # as -z defs.
- _LT_AC_TAGVAR(no_undefined_flag, $1)='${wl}-z,text'
- _LT_AC_TAGVAR(allow_undefined_flag, $1)='${wl}-z,nodefs'
- _LT_AC_TAGVAR(archive_cmds_need_lc, $1)=no
- _LT_AC_TAGVAR(hardcode_shlibpath_var, $1)=no
- _LT_AC_TAGVAR(hardcode_libdir_flag_spec, $1)='`test -z "$SCOABSPATH" && echo ${wl}-R,$libdir`'
- _LT_AC_TAGVAR(hardcode_libdir_separator, $1)=':'
- _LT_AC_TAGVAR(link_all_deplibs, $1)=yes
- _LT_AC_TAGVAR(export_dynamic_flag_spec, $1)='${wl}-Bexport'
- runpath_var='LD_RUN_PATH'
-
- if test "$GCC" = yes; then
- _LT_AC_TAGVAR(archive_cmds, $1)='$CC -shared ${wl}-h,\${SCOABSPATH:+${install_libdir}/}$soname -o $lib $libobjs $deplibs $compiler_flags'
- _LT_AC_TAGVAR(archive_expsym_cmds, $1)='$CC -shared ${wl}-Bexport:$export_symbols ${wl}-h,\${SCOABSPATH:+${install_libdir}/}$soname -o $lib $libobjs $deplibs $compiler_flags'
- else
- _LT_AC_TAGVAR(archive_cmds, $1)='$CC -G ${wl}-h,\${SCOABSPATH:+${install_libdir}/}$soname -o $lib $libobjs $deplibs $compiler_flags'
- _LT_AC_TAGVAR(archive_expsym_cmds, $1)='$CC -G ${wl}-Bexport:$export_symbols ${wl}-h,\${SCOABSPATH:+${install_libdir}/}$soname -o $lib $libobjs $deplibs $compiler_flags'
- fi
- ;;
-
- uts4*)
- _LT_AC_TAGVAR(archive_cmds, $1)='$LD -G -h $soname -o $lib $libobjs $deplibs $linker_flags'
- _LT_AC_TAGVAR(hardcode_libdir_flag_spec, $1)='-L$libdir'
- _LT_AC_TAGVAR(hardcode_shlibpath_var, $1)=no
- ;;
-
- *)
- _LT_AC_TAGVAR(ld_shlibs, $1)=no
- ;;
- esac
- fi
-])
-AC_MSG_RESULT([$_LT_AC_TAGVAR(ld_shlibs, $1)])
-test "$_LT_AC_TAGVAR(ld_shlibs, $1)" = no && can_build_shared=no
-
-#
-# Do we need to explicitly link libc?
-#
-case "x$_LT_AC_TAGVAR(archive_cmds_need_lc, $1)" in
-x|xyes)
- # Assume -lc should be added
- _LT_AC_TAGVAR(archive_cmds_need_lc, $1)=yes
-
- if test "$enable_shared" = yes && test "$GCC" = yes; then
- case $_LT_AC_TAGVAR(archive_cmds, $1) in
- *'~'*)
- # FIXME: we may have to deal with multi-command sequences.
- ;;
- '$CC '*)
- # Test whether the compiler implicitly links with -lc since on some
- # systems, -lgcc has to come before -lc. If gcc already passes -lc
- # to ld, don't add -lc before -lgcc.
- AC_MSG_CHECKING([whether -lc should be explicitly linked in])
- $rm conftest*
- echo "$lt_simple_compile_test_code" > conftest.$ac_ext
-
- if AC_TRY_EVAL(ac_compile) 2>conftest.err; then
- soname=conftest
- lib=conftest
- libobjs=conftest.$ac_objext
- deplibs=
- wl=$_LT_AC_TAGVAR(lt_prog_compiler_wl, $1)
- pic_flag=$_LT_AC_TAGVAR(lt_prog_compiler_pic, $1)
- compiler_flags=-v
- linker_flags=-v
- verstring=
- output_objdir=.
- libname=conftest
- lt_save_allow_undefined_flag=$_LT_AC_TAGVAR(allow_undefined_flag, $1)
- _LT_AC_TAGVAR(allow_undefined_flag, $1)=
- if AC_TRY_EVAL(_LT_AC_TAGVAR(archive_cmds, $1) 2\>\&1 \| grep \" -lc \" \>/dev/null 2\>\&1)
- then
- _LT_AC_TAGVAR(archive_cmds_need_lc, $1)=no
- else
- _LT_AC_TAGVAR(archive_cmds_need_lc, $1)=yes
- fi
- _LT_AC_TAGVAR(allow_undefined_flag, $1)=$lt_save_allow_undefined_flag
- else
- cat conftest.err 1>&5
- fi
- $rm conftest*
- AC_MSG_RESULT([$_LT_AC_TAGVAR(archive_cmds_need_lc, $1)])
- ;;
- esac
- fi
- ;;
-esac
-])# AC_LIBTOOL_PROG_LD_SHLIBS
-
-
-# _LT_AC_FILE_LTDLL_C
-# -------------------
-# Be careful that the start marker always follows a newline.
-AC_DEFUN([_LT_AC_FILE_LTDLL_C], [
-# /* ltdll.c starts here */
-# #define WIN32_LEAN_AND_MEAN
-# #include <windows.h>
-# #undef WIN32_LEAN_AND_MEAN
-# #include <stdio.h>
-#
-# #ifndef __CYGWIN__
-# # ifdef __CYGWIN32__
-# # define __CYGWIN__ __CYGWIN32__
-# # endif
-# #endif
-#
-# #ifdef __cplusplus
-# extern "C" {
-# #endif
-# BOOL APIENTRY DllMain (HINSTANCE hInst, DWORD reason, LPVOID reserved);
-# #ifdef __cplusplus
-# }
-# #endif
-#
-# #ifdef __CYGWIN__
-# #include <cygwin/cygwin_dll.h>
-# DECLARE_CYGWIN_DLL( DllMain );
-# #endif
-# HINSTANCE __hDllInstance_base;
-#
-# BOOL APIENTRY
-# DllMain (HINSTANCE hInst, DWORD reason, LPVOID reserved)
-# {
-# __hDllInstance_base = hInst;
-# return TRUE;
-# }
-# /* ltdll.c ends here */
-])# _LT_AC_FILE_LTDLL_C
-
-
-# _LT_AC_TAGVAR(VARNAME, [TAGNAME])
-# ---------------------------------
-AC_DEFUN([_LT_AC_TAGVAR], [ifelse([$2], [], [$1], [$1_$2])])
-
-
-# old names
-AC_DEFUN([AM_PROG_LIBTOOL], [AC_PROG_LIBTOOL])
-AC_DEFUN([AM_ENABLE_SHARED], [AC_ENABLE_SHARED($@)])
-AC_DEFUN([AM_ENABLE_STATIC], [AC_ENABLE_STATIC($@)])
-AC_DEFUN([AM_DISABLE_SHARED], [AC_DISABLE_SHARED($@)])
-AC_DEFUN([AM_DISABLE_STATIC], [AC_DISABLE_STATIC($@)])
-AC_DEFUN([AM_PROG_LD], [AC_PROG_LD])
-AC_DEFUN([AM_PROG_NM], [AC_PROG_NM])
-
-# This is just to silence aclocal about the macro not being used
-ifelse([AC_DISABLE_FAST_INSTALL])
-
-AC_DEFUN([LT_AC_PROG_GCJ],
-[AC_CHECK_TOOL(GCJ, gcj, no)
- test "x${GCJFLAGS+set}" = xset || GCJFLAGS="-g -O2"
- AC_SUBST(GCJFLAGS)
-])
-
-AC_DEFUN([LT_AC_PROG_RC],
-[AC_CHECK_TOOL(RC, windres, no)
-])
-
-
-# Cheap backport of AS_EXECUTABLE_P and required macros
-# from Autoconf 2.59; we should not use $as_executable_p directly.
-
-# _AS_TEST_PREPARE
-# ----------------
-m4_ifndef([_AS_TEST_PREPARE],
-[m4_defun([_AS_TEST_PREPARE],
-[if test -x / >/dev/null 2>&1; then
- as_executable_p='test -x'
-else
- as_executable_p='test -f'
-fi
-])])# _AS_TEST_PREPARE
-
-# AS_EXECUTABLE_P
-# ---------------
-# Check whether a file is executable.
-m4_ifndef([AS_EXECUTABLE_P],
-[m4_defun([AS_EXECUTABLE_P],
-[AS_REQUIRE([_AS_TEST_PREPARE])dnl
-$as_executable_p $1[]dnl
-])])# AS_EXECUTABLE_P
-
-# NOTE: This macro has been submitted for inclusion into #
-# GNU Autoconf as AC_PROG_SED. When it is available in #
-# a released version of Autoconf we should remove this #
-# macro and use it instead. #
-# LT_AC_PROG_SED
-# --------------
-# Check for a fully-functional sed program, that truncates
-# as few characters as possible. Prefer GNU sed if found.
-AC_DEFUN([LT_AC_PROG_SED],
-[AC_MSG_CHECKING([for a sed that does not truncate output])
-AC_CACHE_VAL(lt_cv_path_SED,
-[# Loop through the user's path and test for sed and gsed.
-# Then use that list of sed's as ones to test for truncation.
-as_save_IFS=$IFS; IFS=$PATH_SEPARATOR
-for as_dir in $PATH
-do
- IFS=$as_save_IFS
- test -z "$as_dir" && as_dir=.
- for lt_ac_prog in sed gsed; do
- for ac_exec_ext in '' $ac_executable_extensions; do
- if AS_EXECUTABLE_P(["$as_dir/$lt_ac_prog$ac_exec_ext"]); then
- lt_ac_sed_list="$lt_ac_sed_list $as_dir/$lt_ac_prog$ac_exec_ext"
- fi
- done
- done
-done
-IFS=$as_save_IFS
-lt_ac_max=0
-lt_ac_count=0
-# Add /usr/xpg4/bin/sed as it is typically found on Solaris
-# along with /bin/sed that truncates output.
-for lt_ac_sed in $lt_ac_sed_list /usr/xpg4/bin/sed; do
- test ! -f $lt_ac_sed && continue
- cat /dev/null > conftest.in
- lt_ac_count=0
- echo $ECHO_N "0123456789$ECHO_C" >conftest.in
- # Check for GNU sed and select it if it is found.
- if "$lt_ac_sed" --version 2>&1 < /dev/null | grep 'GNU' > /dev/null; then
- lt_cv_path_SED=$lt_ac_sed
- break
- fi
- while true; do
- cat conftest.in conftest.in >conftest.tmp
- mv conftest.tmp conftest.in
- cp conftest.in conftest.nl
- echo >>conftest.nl
- $lt_ac_sed -e 's/a$//' < conftest.nl >conftest.out || break
- cmp -s conftest.out conftest.nl || break
- # 10000 chars as input seems more than enough
- test $lt_ac_count -gt 10 && break
- lt_ac_count=`expr $lt_ac_count + 1`
- if test $lt_ac_count -gt $lt_ac_max; then
- lt_ac_max=$lt_ac_count
- lt_cv_path_SED=$lt_ac_sed
- fi
- done
-done
-])
-SED=$lt_cv_path_SED
-AC_SUBST([SED])
-AC_MSG_RESULT([$SED])
-])
-
-# visibility.m4 serial 1 (gettext-0.15)
-dnl Copyright (C) 2005 Free Software Foundation, Inc.
-dnl This file is free software; the Free Software Foundation
-dnl gives unlimited permission to copy and/or distribute it,
-dnl with or without modifications, as long as this notice is preserved.
-
-dnl From Bruno Haible.
-
-dnl Tests whether the compiler supports the command-line option
-dnl -fvisibility=hidden and the function and variable attributes
-dnl __attribute__((__visibility__("hidden"))) and
-dnl __attribute__((__visibility__("default"))).
-dnl Does *not* test for __visibility__("protected") - which has tricky
-dnl semantics (see the 'vismain' test in glibc) and does not exist e.g. on
-dnl MacOS X.
-dnl Does *not* test for __visibility__("internal") - which has processor
-dnl dependent semantics.
-dnl Does *not* test for #pragma GCC visibility push(hidden) - which is
-dnl "really only recommended for legacy code".
-dnl Set the variable CFLAG_VISIBILITY.
-dnl Defines and sets the variable HAVE_VISIBILITY.
-
-AC_DEFUN([gl_VISIBILITY],
-[
- AC_REQUIRE([AC_PROG_CC])
- CFLAG_VISIBILITY=
- HAVE_VISIBILITY=0
- if test -n "$GCC"; then
- AC_MSG_CHECKING([for simple visibility declarations])
- AC_CACHE_VAL(gl_cv_cc_visibility, [
- gl_save_CFLAGS="$CFLAGS"
- CFLAGS="$CFLAGS -fvisibility=hidden"
- AC_TRY_COMPILE(
- [extern __attribute__((__visibility__("hidden"))) int hiddenvar;
- extern __attribute__((__visibility__("default"))) int exportedvar;
- extern __attribute__((__visibility__("hidden"))) int hiddenfunc (void);
- extern __attribute__((__visibility__("default"))) int exportedfunc (void);],
- [],
- gl_cv_cc_visibility=yes,
- gl_cv_cc_visibility=no)
- CFLAGS="$gl_save_CFLAGS"])
- AC_MSG_RESULT([$gl_cv_cc_visibility])
- if test $gl_cv_cc_visibility = yes; then
- CFLAG_VISIBILITY="-fvisibility=hidden"
- HAVE_VISIBILITY=1
- fi
- fi
- AC_SUBST([CFLAG_VISIBILITY])
- AC_SUBST([HAVE_VISIBILITY])
- AC_DEFINE_UNQUOTED([HAVE_VISIBILITY], [$HAVE_VISIBILITY],
- [Define to 1 or 0, depending whether the compiler supports simple visibility declarations.])
-])
-
-# Copyright (C) 2002, 2003, 2005, 2006, 2007, 2008 Free Software Foundation, Inc.
-#
-# This file is free software; the Free Software Foundation
-# gives unlimited permission to copy and/or distribute it,
-# with or without modifications, as long as this notice is preserved.
-
-# AM_AUTOMAKE_VERSION(VERSION)
-# ----------------------------
-# Automake X.Y traces this macro to ensure aclocal.m4 has been
-# generated from the m4 files accompanying Automake X.Y.
-# (This private macro should not be called outside this file.)
-AC_DEFUN([AM_AUTOMAKE_VERSION],
-[am__api_version='1.10'
-dnl Some users find AM_AUTOMAKE_VERSION and mistake it for a way to
-dnl require some minimum version. Point them to the right macro.
-m4_if([$1], [1.10.2], [],
- [AC_FATAL([Do not call $0, use AM_INIT_AUTOMAKE([$1]).])])dnl
-])
-
-# _AM_AUTOCONF_VERSION(VERSION)
-# -----------------------------
-# aclocal traces this macro to find the Autoconf version.
-# This is a private macro too. Using m4_define simplifies
-# the logic in aclocal, which can simply ignore this definition.
-m4_define([_AM_AUTOCONF_VERSION], [])
-
-# AM_SET_CURRENT_AUTOMAKE_VERSION
-# -------------------------------
-# Call AM_AUTOMAKE_VERSION and AM_AUTOMAKE_VERSION so they can be traced.
-# This function is AC_REQUIREd by AM_INIT_AUTOMAKE.
-AC_DEFUN([AM_SET_CURRENT_AUTOMAKE_VERSION],
-[AM_AUTOMAKE_VERSION([1.10.2])dnl
-m4_ifndef([AC_AUTOCONF_VERSION],
- [m4_copy([m4_PACKAGE_VERSION], [AC_AUTOCONF_VERSION])])dnl
-_AM_AUTOCONF_VERSION(m4_defn([AC_AUTOCONF_VERSION]))])
-
-# Figure out how to run the assembler. -*- Autoconf -*-
-
-# Copyright (C) 2001, 2003, 2004, 2005, 2006 Free Software Foundation, Inc.
-#
-# This file is free software; the Free Software Foundation
-# gives unlimited permission to copy and/or distribute it,
-# with or without modifications, as long as this notice is preserved.
-
-# serial 5
-
-# AM_PROG_AS
-# ----------
-AC_DEFUN([AM_PROG_AS],
-[# By default we simply use the C compiler to build assembly code.
-AC_REQUIRE([AC_PROG_CC])
-test "${CCAS+set}" = set || CCAS=$CC
-test "${CCASFLAGS+set}" = set || CCASFLAGS=$CFLAGS
-AC_ARG_VAR([CCAS], [assembler compiler command (defaults to CC)])
-AC_ARG_VAR([CCASFLAGS], [assembler compiler flags (defaults to CFLAGS)])
-_AM_IF_OPTION([no-dependencies],, [_AM_DEPENDENCIES([CCAS])])dnl
-])
-
-# AM_AUX_DIR_EXPAND -*- Autoconf -*-
-
-# Copyright (C) 2001, 2003, 2005 Free Software Foundation, Inc.
-#
-# This file is free software; the Free Software Foundation
-# gives unlimited permission to copy and/or distribute it,
-# with or without modifications, as long as this notice is preserved.
-
-# For projects using AC_CONFIG_AUX_DIR([foo]), Autoconf sets
-# $ac_aux_dir to `$srcdir/foo'. In other projects, it is set to
-# `$srcdir', `$srcdir/..', or `$srcdir/../..'.
-#
-# Of course, Automake must honor this variable whenever it calls a
-# tool from the auxiliary directory. The problem is that $srcdir (and
-# therefore $ac_aux_dir as well) can be either absolute or relative,
-# depending on how configure is run. This is pretty annoying, since
-# it makes $ac_aux_dir quite unusable in subdirectories: in the top
-# source directory, any form will work fine, but in subdirectories a
-# relative path needs to be adjusted first.
-#
-# $ac_aux_dir/missing
-# fails when called from a subdirectory if $ac_aux_dir is relative
-# $top_srcdir/$ac_aux_dir/missing
-# fails if $ac_aux_dir is absolute,
-# fails when called from a subdirectory in a VPATH build with
-# a relative $ac_aux_dir
-#
-# The reason of the latter failure is that $top_srcdir and $ac_aux_dir
-# are both prefixed by $srcdir. In an in-source build this is usually
-# harmless because $srcdir is `.', but things will broke when you
-# start a VPATH build or use an absolute $srcdir.
-#
-# So we could use something similar to $top_srcdir/$ac_aux_dir/missing,
-# iff we strip the leading $srcdir from $ac_aux_dir. That would be:
-# am_aux_dir='\$(top_srcdir)/'`expr "$ac_aux_dir" : "$srcdir//*\(.*\)"`
-# and then we would define $MISSING as
-# MISSING="\${SHELL} $am_aux_dir/missing"
-# This will work as long as MISSING is not called from configure, because
-# unfortunately $(top_srcdir) has no meaning in configure.
-# However there are other variables, like CC, which are often used in
-# configure, and could therefore not use this "fixed" $ac_aux_dir.
-#
-# Another solution, used here, is to always expand $ac_aux_dir to an
-# absolute PATH. The drawback is that using absolute paths prevent a
-# configured tree to be moved without reconfiguration.
-
-AC_DEFUN([AM_AUX_DIR_EXPAND],
-[dnl Rely on autoconf to set up CDPATH properly.
-AC_PREREQ([2.50])dnl
-# expand $ac_aux_dir to an absolute path
-am_aux_dir=`cd $ac_aux_dir && pwd`
-])
-
-# AM_CONDITIONAL -*- Autoconf -*-
-
-# Copyright (C) 1997, 2000, 2001, 2003, 2004, 2005, 2006
-# Free Software Foundation, Inc.
-#
-# This file is free software; the Free Software Foundation
-# gives unlimited permission to copy and/or distribute it,
-# with or without modifications, as long as this notice is preserved.
-
-# serial 8
-
-# AM_CONDITIONAL(NAME, SHELL-CONDITION)
-# -------------------------------------
-# Define a conditional.
-AC_DEFUN([AM_CONDITIONAL],
-[AC_PREREQ(2.52)dnl
- ifelse([$1], [TRUE], [AC_FATAL([$0: invalid condition: $1])],
- [$1], [FALSE], [AC_FATAL([$0: invalid condition: $1])])dnl
-AC_SUBST([$1_TRUE])dnl
-AC_SUBST([$1_FALSE])dnl
-_AM_SUBST_NOTMAKE([$1_TRUE])dnl
-_AM_SUBST_NOTMAKE([$1_FALSE])dnl
-if $2; then
- $1_TRUE=
- $1_FALSE='#'
-else
- $1_TRUE='#'
- $1_FALSE=
-fi
-AC_CONFIG_COMMANDS_PRE(
-[if test -z "${$1_TRUE}" && test -z "${$1_FALSE}"; then
- AC_MSG_ERROR([[conditional "$1" was never defined.
-Usually this means the macro was only invoked conditionally.]])
-fi])])
-
-# Copyright (C) 1999, 2000, 2001, 2002, 2003, 2004, 2005, 2006
-# Free Software Foundation, Inc.
-#
-# This file is free software; the Free Software Foundation
-# gives unlimited permission to copy and/or distribute it,
-# with or without modifications, as long as this notice is preserved.
-
-# serial 9
-
-# There are a few dirty hacks below to avoid letting `AC_PROG_CC' be
-# written in clear, in which case automake, when reading aclocal.m4,
-# will think it sees a *use*, and therefore will trigger all it's
-# C support machinery. Also note that it means that autoscan, seeing
-# CC etc. in the Makefile, will ask for an AC_PROG_CC use...
-
-
-# _AM_DEPENDENCIES(NAME)
-# ----------------------
-# See how the compiler implements dependency checking.
-# NAME is "CC", "CXX", "GCJ", or "OBJC".
-# We try a few techniques and use that to set a single cache variable.
-#
-# We don't AC_REQUIRE the corresponding AC_PROG_CC since the latter was
-# modified to invoke _AM_DEPENDENCIES(CC); we would have a circular
-# dependency, and given that the user is not expected to run this macro,
-# just rely on AC_PROG_CC.
-AC_DEFUN([_AM_DEPENDENCIES],
-[AC_REQUIRE([AM_SET_DEPDIR])dnl
-AC_REQUIRE([AM_OUTPUT_DEPENDENCY_COMMANDS])dnl
-AC_REQUIRE([AM_MAKE_INCLUDE])dnl
-AC_REQUIRE([AM_DEP_TRACK])dnl
-
-ifelse([$1], CC, [depcc="$CC" am_compiler_list=],
- [$1], CXX, [depcc="$CXX" am_compiler_list=],
- [$1], OBJC, [depcc="$OBJC" am_compiler_list='gcc3 gcc'],
- [$1], UPC, [depcc="$UPC" am_compiler_list=],
- [$1], GCJ, [depcc="$GCJ" am_compiler_list='gcc3 gcc'],
- [depcc="$$1" am_compiler_list=])
-
-AC_CACHE_CHECK([dependency style of $depcc],
- [am_cv_$1_dependencies_compiler_type],
-[if test -z "$AMDEP_TRUE" && test -f "$am_depcomp"; then
- # We make a subdir and do the tests there. Otherwise we can end up
- # making bogus files that we don't know about and never remove. For
- # instance it was reported that on HP-UX the gcc test will end up
- # making a dummy file named `D' -- because `-MD' means `put the output
- # in D'.
- mkdir conftest.dir
- # Copy depcomp to subdir because otherwise we won't find it if we're
- # using a relative directory.
- cp "$am_depcomp" conftest.dir
- cd conftest.dir
- # We will build objects and dependencies in a subdirectory because
- # it helps to detect inapplicable dependency modes. For instance
- # both Tru64's cc and ICC support -MD to output dependencies as a
- # side effect of compilation, but ICC will put the dependencies in
- # the current directory while Tru64 will put them in the object
- # directory.
- mkdir sub
-
- am_cv_$1_dependencies_compiler_type=none
- if test "$am_compiler_list" = ""; then
- am_compiler_list=`sed -n ['s/^#*\([a-zA-Z0-9]*\))$/\1/p'] < ./depcomp`
- fi
- for depmode in $am_compiler_list; do
- # Setup a source with many dependencies, because some compilers
- # like to wrap large dependency lists on column 80 (with \), and
- # we should not choose a depcomp mode which is confused by this.
- #
- # We need to recreate these files for each test, as the compiler may
- # overwrite some of them when testing with obscure command lines.
- # This happens at least with the AIX C compiler.
- : > sub/conftest.c
- for i in 1 2 3 4 5 6; do
- echo '#include "conftst'$i'.h"' >> sub/conftest.c
- # Using `: > sub/conftst$i.h' creates only sub/conftst1.h with
- # Solaris 8's {/usr,}/bin/sh.
- touch sub/conftst$i.h
- done
- echo "${am__include} ${am__quote}sub/conftest.Po${am__quote}" > confmf
-
- case $depmode in
- nosideeffect)
- # after this tag, mechanisms are not by side-effect, so they'll
- # only be used when explicitly requested
- if test "x$enable_dependency_tracking" = xyes; then
- continue
- else
- break
- fi
- ;;
- none) break ;;
- esac
- # We check with `-c' and `-o' for the sake of the "dashmstdout"
- # mode. It turns out that the SunPro C++ compiler does not properly
- # handle `-M -o', and we need to detect this.
- if depmode=$depmode \
- source=sub/conftest.c object=sub/conftest.${OBJEXT-o} \
- depfile=sub/conftest.Po tmpdepfile=sub/conftest.TPo \
- $SHELL ./depcomp $depcc -c -o sub/conftest.${OBJEXT-o} sub/conftest.c \
- >/dev/null 2>conftest.err &&
- grep sub/conftst1.h sub/conftest.Po > /dev/null 2>&1 &&
- grep sub/conftst6.h sub/conftest.Po > /dev/null 2>&1 &&
- grep sub/conftest.${OBJEXT-o} sub/conftest.Po > /dev/null 2>&1 &&
- ${MAKE-make} -s -f confmf > /dev/null 2>&1; then
- # icc doesn't choke on unknown options, it will just issue warnings
- # or remarks (even with -Werror). So we grep stderr for any message
- # that says an option was ignored or not supported.
- # When given -MP, icc 7.0 and 7.1 complain thusly:
- # icc: Command line warning: ignoring option '-M'; no argument required
- # The diagnosis changed in icc 8.0:
- # icc: Command line remark: option '-MP' not supported
- if (grep 'ignoring option' conftest.err ||
- grep 'not supported' conftest.err) >/dev/null 2>&1; then :; else
- am_cv_$1_dependencies_compiler_type=$depmode
- break
- fi
- fi
- done
-
- cd ..
- rm -rf conftest.dir
-else
- am_cv_$1_dependencies_compiler_type=none
-fi
-])
-AC_SUBST([$1DEPMODE], [depmode=$am_cv_$1_dependencies_compiler_type])
-AM_CONDITIONAL([am__fastdep$1], [
- test "x$enable_dependency_tracking" != xno \
- && test "$am_cv_$1_dependencies_compiler_type" = gcc3])
-])
-
-
-# AM_SET_DEPDIR
-# -------------
-# Choose a directory name for dependency files.
-# This macro is AC_REQUIREd in _AM_DEPENDENCIES
-AC_DEFUN([AM_SET_DEPDIR],
-[AC_REQUIRE([AM_SET_LEADING_DOT])dnl
-AC_SUBST([DEPDIR], ["${am__leading_dot}deps"])dnl
-])
-
-
-# AM_DEP_TRACK
-# ------------
-AC_DEFUN([AM_DEP_TRACK],
-[AC_ARG_ENABLE(dependency-tracking,
-[ --disable-dependency-tracking speeds up one-time build
- --enable-dependency-tracking do not reject slow dependency extractors])
-if test "x$enable_dependency_tracking" != xno; then
- am_depcomp="$ac_aux_dir/depcomp"
- AMDEPBACKSLASH='\'
-fi
-AM_CONDITIONAL([AMDEP], [test "x$enable_dependency_tracking" != xno])
-AC_SUBST([AMDEPBACKSLASH])dnl
-_AM_SUBST_NOTMAKE([AMDEPBACKSLASH])dnl
-])
-
-# Generate code to set up dependency tracking. -*- Autoconf -*-
-
-# Copyright (C) 1999, 2000, 2001, 2002, 2003, 2004, 2005, 2008
-# Free Software Foundation, Inc.
-#
-# This file is free software; the Free Software Foundation
-# gives unlimited permission to copy and/or distribute it,
-# with or without modifications, as long as this notice is preserved.
-
-#serial 4
-
-# _AM_OUTPUT_DEPENDENCY_COMMANDS
-# ------------------------------
-AC_DEFUN([_AM_OUTPUT_DEPENDENCY_COMMANDS],
-[# Autoconf 2.62 quotes --file arguments for eval, but not when files
-# are listed without --file. Let's play safe and only enable the eval
-# if we detect the quoting.
-case $CONFIG_FILES in
-*\'*) eval set x "$CONFIG_FILES" ;;
-*) set x $CONFIG_FILES ;;
-esac
-shift
-for mf
-do
- # Strip MF so we end up with the name of the file.
- mf=`echo "$mf" | sed -e 's/:.*$//'`
- # Check whether this is an Automake generated Makefile or not.
- # We used to match only the files named `Makefile.in', but
- # some people rename them; so instead we look at the file content.
- # Grep'ing the first line is not enough: some people post-process
- # each Makefile.in and add a new line on top of each file to say so.
- # Grep'ing the whole file is not good either: AIX grep has a line
- # limit of 2048, but all sed's we know have understand at least 4000.
- if sed -n 's,^#.*generated by automake.*,X,p' "$mf" | grep X >/dev/null 2>&1; then
- dirpart=`AS_DIRNAME("$mf")`
- else
- continue
- fi
- # Extract the definition of DEPDIR, am__include, and am__quote
- # from the Makefile without running `make'.
- DEPDIR=`sed -n 's/^DEPDIR = //p' < "$mf"`
- test -z "$DEPDIR" && continue
- am__include=`sed -n 's/^am__include = //p' < "$mf"`
- test -z "am__include" && continue
- am__quote=`sed -n 's/^am__quote = //p' < "$mf"`
- # When using ansi2knr, U may be empty or an underscore; expand it
- U=`sed -n 's/^U = //p' < "$mf"`
- # Find all dependency output files, they are included files with
- # $(DEPDIR) in their names. We invoke sed twice because it is the
- # simplest approach to changing $(DEPDIR) to its actual value in the
- # expansion.
- for file in `sed -n "
- s/^$am__include $am__quote\(.*(DEPDIR).*\)$am__quote"'$/\1/p' <"$mf" | \
- sed -e 's/\$(DEPDIR)/'"$DEPDIR"'/g' -e 's/\$U/'"$U"'/g'`; do
- # Make sure the directory exists.
- test -f "$dirpart/$file" && continue
- fdir=`AS_DIRNAME(["$file"])`
- AS_MKDIR_P([$dirpart/$fdir])
- # echo "creating $dirpart/$file"
- echo '# dummy' > "$dirpart/$file"
- done
-done
-])# _AM_OUTPUT_DEPENDENCY_COMMANDS
-
-
-# AM_OUTPUT_DEPENDENCY_COMMANDS
-# -----------------------------
-# This macro should only be invoked once -- use via AC_REQUIRE.
-#
-# This code is only required when automatic dependency tracking
-# is enabled. FIXME. This creates each `.P' file that we will
-# need in order to bootstrap the dependency handling code.
-AC_DEFUN([AM_OUTPUT_DEPENDENCY_COMMANDS],
-[AC_CONFIG_COMMANDS([depfiles],
- [test x"$AMDEP_TRUE" != x"" || _AM_OUTPUT_DEPENDENCY_COMMANDS],
- [AMDEP_TRUE="$AMDEP_TRUE" ac_aux_dir="$ac_aux_dir"])
-])
-
-# Do all the work for Automake. -*- Autoconf -*-
-
-# Copyright (C) 1996, 1997, 1998, 1999, 2000, 2001, 2002, 2003, 2004,
-# 2005, 2006, 2008 Free Software Foundation, Inc.
-#
-# This file is free software; the Free Software Foundation
-# gives unlimited permission to copy and/or distribute it,
-# with or without modifications, as long as this notice is preserved.
-
-# serial 13
-
-# This macro actually does too much. Some checks are only needed if
-# your package does certain things. But this isn't really a big deal.
-
-# AM_INIT_AUTOMAKE(PACKAGE, VERSION, [NO-DEFINE])
-# AM_INIT_AUTOMAKE([OPTIONS])
-# -----------------------------------------------
-# The call with PACKAGE and VERSION arguments is the old style
-# call (pre autoconf-2.50), which is being phased out. PACKAGE
-# and VERSION should now be passed to AC_INIT and removed from
-# the call to AM_INIT_AUTOMAKE.
-# We support both call styles for the transition. After
-# the next Automake release, Autoconf can make the AC_INIT
-# arguments mandatory, and then we can depend on a new Autoconf
-# release and drop the old call support.
-AC_DEFUN([AM_INIT_AUTOMAKE],
-[AC_PREREQ([2.60])dnl
-dnl Autoconf wants to disallow AM_ names. We explicitly allow
-dnl the ones we care about.
-m4_pattern_allow([^AM_[A-Z]+FLAGS$])dnl
-AC_REQUIRE([AM_SET_CURRENT_AUTOMAKE_VERSION])dnl
-AC_REQUIRE([AC_PROG_INSTALL])dnl
-if test "`cd $srcdir && pwd`" != "`pwd`"; then
- # Use -I$(srcdir) only when $(srcdir) != ., so that make's output
- # is not polluted with repeated "-I."
- AC_SUBST([am__isrc], [' -I$(srcdir)'])_AM_SUBST_NOTMAKE([am__isrc])dnl
- # test to see if srcdir already configured
- if test -f $srcdir/config.status; then
- AC_MSG_ERROR([source directory already configured; run "make distclean" there first])
- fi
-fi
-
-# test whether we have cygpath
-if test -z "$CYGPATH_W"; then
- if (cygpath --version) >/dev/null 2>/dev/null; then
- CYGPATH_W='cygpath -w'
- else
- CYGPATH_W=echo
- fi
-fi
-AC_SUBST([CYGPATH_W])
-
-# Define the identity of the package.
-dnl Distinguish between old-style and new-style calls.
-m4_ifval([$2],
-[m4_ifval([$3], [_AM_SET_OPTION([no-define])])dnl
- AC_SUBST([PACKAGE], [$1])dnl
- AC_SUBST([VERSION], [$2])],
-[_AM_SET_OPTIONS([$1])dnl
-dnl Diagnose old-style AC_INIT with new-style AM_AUTOMAKE_INIT.
-m4_if(m4_ifdef([AC_PACKAGE_NAME], 1)m4_ifdef([AC_PACKAGE_VERSION], 1), 11,,
- [m4_fatal([AC_INIT should be called with package and version arguments])])dnl
- AC_SUBST([PACKAGE], ['AC_PACKAGE_TARNAME'])dnl
- AC_SUBST([VERSION], ['AC_PACKAGE_VERSION'])])dnl
-
-_AM_IF_OPTION([no-define],,
-[AC_DEFINE_UNQUOTED(PACKAGE, "$PACKAGE", [Name of package])
- AC_DEFINE_UNQUOTED(VERSION, "$VERSION", [Version number of package])])dnl
-
-# Some tools Automake needs.
-AC_REQUIRE([AM_SANITY_CHECK])dnl
-AC_REQUIRE([AC_ARG_PROGRAM])dnl
-AM_MISSING_PROG(ACLOCAL, aclocal-${am__api_version})
-AM_MISSING_PROG(AUTOCONF, autoconf)
-AM_MISSING_PROG(AUTOMAKE, automake-${am__api_version})
-AM_MISSING_PROG(AUTOHEADER, autoheader)
-AM_MISSING_PROG(MAKEINFO, makeinfo)
-AM_PROG_INSTALL_SH
-AM_PROG_INSTALL_STRIP
-AC_REQUIRE([AM_PROG_MKDIR_P])dnl
-# We need awk for the "check" target. The system "awk" is bad on
-# some platforms.
-AC_REQUIRE([AC_PROG_AWK])dnl
-AC_REQUIRE([AC_PROG_MAKE_SET])dnl
-AC_REQUIRE([AM_SET_LEADING_DOT])dnl
-_AM_IF_OPTION([tar-ustar], [_AM_PROG_TAR([ustar])],
- [_AM_IF_OPTION([tar-pax], [_AM_PROG_TAR([pax])],
- [_AM_PROG_TAR([v7])])])
-_AM_IF_OPTION([no-dependencies],,
-[AC_PROVIDE_IFELSE([AC_PROG_CC],
- [_AM_DEPENDENCIES(CC)],
- [define([AC_PROG_CC],
- defn([AC_PROG_CC])[_AM_DEPENDENCIES(CC)])])dnl
-AC_PROVIDE_IFELSE([AC_PROG_CXX],
- [_AM_DEPENDENCIES(CXX)],
- [define([AC_PROG_CXX],
- defn([AC_PROG_CXX])[_AM_DEPENDENCIES(CXX)])])dnl
-AC_PROVIDE_IFELSE([AC_PROG_OBJC],
- [_AM_DEPENDENCIES(OBJC)],
- [define([AC_PROG_OBJC],
- defn([AC_PROG_OBJC])[_AM_DEPENDENCIES(OBJC)])])dnl
-])
-])
-
-
-# When config.status generates a header, we must update the stamp-h file.
-# This file resides in the same directory as the config header
-# that is generated. The stamp files are numbered to have different names.
-
-# Autoconf calls _AC_AM_CONFIG_HEADER_HOOK (when defined) in the
-# loop where config.status creates the headers, so we can generate
-# our stamp files there.
-AC_DEFUN([_AC_AM_CONFIG_HEADER_HOOK],
-[# Compute $1's index in $config_headers.
-_am_arg=$1
-_am_stamp_count=1
-for _am_header in $config_headers :; do
- case $_am_header in
- $_am_arg | $_am_arg:* )
- break ;;
- * )
- _am_stamp_count=`expr $_am_stamp_count + 1` ;;
- esac
-done
-echo "timestamp for $_am_arg" >`AS_DIRNAME(["$_am_arg"])`/stamp-h[]$_am_stamp_count])
-
-# Copyright (C) 2001, 2003, 2005 Free Software Foundation, Inc.
-#
-# This file is free software; the Free Software Foundation
-# gives unlimited permission to copy and/or distribute it,
-# with or without modifications, as long as this notice is preserved.
-
-# AM_PROG_INSTALL_SH
-# ------------------
-# Define $install_sh.
-AC_DEFUN([AM_PROG_INSTALL_SH],
-[AC_REQUIRE([AM_AUX_DIR_EXPAND])dnl
-install_sh=${install_sh-"\$(SHELL) $am_aux_dir/install-sh"}
-AC_SUBST(install_sh)])
-
-# Copyright (C) 2003, 2005 Free Software Foundation, Inc.
-#
-# This file is free software; the Free Software Foundation
-# gives unlimited permission to copy and/or distribute it,
-# with or without modifications, as long as this notice is preserved.
-
-# serial 2
-
-# Check whether the underlying file-system supports filenames
-# with a leading dot. For instance MS-DOS doesn't.
-AC_DEFUN([AM_SET_LEADING_DOT],
-[rm -rf .tst 2>/dev/null
-mkdir .tst 2>/dev/null
-if test -d .tst; then
- am__leading_dot=.
-else
- am__leading_dot=_
-fi
-rmdir .tst 2>/dev/null
-AC_SUBST([am__leading_dot])])
-
-# Check to see how 'make' treats includes. -*- Autoconf -*-
-
-# Copyright (C) 2001, 2002, 2003, 2005 Free Software Foundation, Inc.
-#
-# This file is free software; the Free Software Foundation
-# gives unlimited permission to copy and/or distribute it,
-# with or without modifications, as long as this notice is preserved.
-
-# serial 3
-
-# AM_MAKE_INCLUDE()
-# -----------------
-# Check to see how make treats includes.
-AC_DEFUN([AM_MAKE_INCLUDE],
-[am_make=${MAKE-make}
-cat > confinc << 'END'
-am__doit:
- @echo done
-.PHONY: am__doit
-END
-# If we don't find an include directive, just comment out the code.
-AC_MSG_CHECKING([for style of include used by $am_make])
-am__include="#"
-am__quote=
-_am_result=none
-# First try GNU make style include.
-echo "include confinc" > confmf
-# We grep out `Entering directory' and `Leaving directory'
-# messages which can occur if `w' ends up in MAKEFLAGS.
-# In particular we don't look at `^make:' because GNU make might
-# be invoked under some other name (usually "gmake"), in which
-# case it prints its new name instead of `make'.
-if test "`$am_make -s -f confmf 2> /dev/null | grep -v 'ing directory'`" = "done"; then
- am__include=include
- am__quote=
- _am_result=GNU
-fi
-# Now try BSD make style include.
-if test "$am__include" = "#"; then
- echo '.include "confinc"' > confmf
- if test "`$am_make -s -f confmf 2> /dev/null`" = "done"; then
- am__include=.include
- am__quote="\""
- _am_result=BSD
- fi
-fi
-AC_SUBST([am__include])
-AC_SUBST([am__quote])
-AC_MSG_RESULT([$_am_result])
-rm -f confinc confmf
-])
-
-# Copyright (C) 1999, 2000, 2001, 2003, 2004, 2005, 2008
-# Free Software Foundation, Inc.
-#
-# This file is free software; the Free Software Foundation
-# gives unlimited permission to copy and/or distribute it,
-# with or without modifications, as long as this notice is preserved.
-
-# serial 6
-
-# AM_PROG_CC_C_O
-# --------------
-# Like AC_PROG_CC_C_O, but changed for automake.
-AC_DEFUN([AM_PROG_CC_C_O],
-[AC_REQUIRE([AC_PROG_CC_C_O])dnl
-AC_REQUIRE([AM_AUX_DIR_EXPAND])dnl
-AC_REQUIRE_AUX_FILE([compile])dnl
-# FIXME: we rely on the cache variable name because
-# there is no other way.
-set dummy $CC
-am_cc=`echo $[2] | sed ['s/[^a-zA-Z0-9_]/_/g;s/^[0-9]/_/']`
-eval am_t=\$ac_cv_prog_cc_${am_cc}_c_o
-if test "$am_t" != yes; then
- # Losing compiler, so override with the script.
- # FIXME: It is wrong to rewrite CC.
- # But if we don't then we get into trouble of one sort or another.
- # A longer-term fix would be to have automake use am__CC in this case,
- # and then we could set am__CC="\$(top_srcdir)/compile \$(CC)"
- CC="$am_aux_dir/compile $CC"
-fi
-dnl Make sure AC_PROG_CC is never called again, or it will override our
-dnl setting of CC.
-m4_define([AC_PROG_CC],
- [m4_fatal([AC_PROG_CC cannot be called after AM_PROG_CC_C_O])])
-])
-
-# Fake the existence of programs that GNU maintainers use. -*- Autoconf -*-
-
-# Copyright (C) 1997, 1999, 2000, 2001, 2003, 2004, 2005
-# Free Software Foundation, Inc.
-#
-# This file is free software; the Free Software Foundation
-# gives unlimited permission to copy and/or distribute it,
-# with or without modifications, as long as this notice is preserved.
-
-# serial 5
-
-# AM_MISSING_PROG(NAME, PROGRAM)
-# ------------------------------
-AC_DEFUN([AM_MISSING_PROG],
-[AC_REQUIRE([AM_MISSING_HAS_RUN])
-$1=${$1-"${am_missing_run}$2"}
-AC_SUBST($1)])
-
-
-# AM_MISSING_HAS_RUN
-# ------------------
-# Define MISSING if not defined so far and test if it supports --run.
-# If it does, set am_missing_run to use it, otherwise, to nothing.
-AC_DEFUN([AM_MISSING_HAS_RUN],
-[AC_REQUIRE([AM_AUX_DIR_EXPAND])dnl
-AC_REQUIRE_AUX_FILE([missing])dnl
-test x"${MISSING+set}" = xset || MISSING="\${SHELL} $am_aux_dir/missing"
-# Use eval to expand $SHELL
-if eval "$MISSING --run true"; then
- am_missing_run="$MISSING --run "
-else
- am_missing_run=
- AC_MSG_WARN([`missing' script is too old or missing])
-fi
-])
-
-# Copyright (C) 2003, 2004, 2005, 2006 Free Software Foundation, Inc.
-#
-# This file is free software; the Free Software Foundation
-# gives unlimited permission to copy and/or distribute it,
-# with or without modifications, as long as this notice is preserved.
-
-# AM_PROG_MKDIR_P
-# ---------------
-# Check for `mkdir -p'.
-AC_DEFUN([AM_PROG_MKDIR_P],
-[AC_PREREQ([2.60])dnl
-AC_REQUIRE([AC_PROG_MKDIR_P])dnl
-dnl Automake 1.8 to 1.9.6 used to define mkdir_p. We now use MKDIR_P,
-dnl while keeping a definition of mkdir_p for backward compatibility.
-dnl @MKDIR_P@ is magic: AC_OUTPUT adjusts its value for each Makefile.
-dnl However we cannot define mkdir_p as $(MKDIR_P) for the sake of
-dnl Makefile.ins that do not define MKDIR_P, so we do our own
-dnl adjustment using top_builddir (which is defined more often than
-dnl MKDIR_P).
-AC_SUBST([mkdir_p], ["$MKDIR_P"])dnl
-case $mkdir_p in
- [[\\/$]]* | ?:[[\\/]]*) ;;
- */*) mkdir_p="\$(top_builddir)/$mkdir_p" ;;
-esac
-])
-
-# Helper functions for option handling. -*- Autoconf -*-
-
-# Copyright (C) 2001, 2002, 2003, 2005, 2008 Free Software Foundation, Inc.
-#
-# This file is free software; the Free Software Foundation
-# gives unlimited permission to copy and/or distribute it,
-# with or without modifications, as long as this notice is preserved.
-
-# serial 4
-
-# _AM_MANGLE_OPTION(NAME)
-# -----------------------
-AC_DEFUN([_AM_MANGLE_OPTION],
-[[_AM_OPTION_]m4_bpatsubst($1, [[^a-zA-Z0-9_]], [_])])
-
-# _AM_SET_OPTION(NAME)
-# ------------------------------
-# Set option NAME. Presently that only means defining a flag for this option.
-AC_DEFUN([_AM_SET_OPTION],
-[m4_define(_AM_MANGLE_OPTION([$1]), 1)])
-
-# _AM_SET_OPTIONS(OPTIONS)
-# ----------------------------------
-# OPTIONS is a space-separated list of Automake options.
-AC_DEFUN([_AM_SET_OPTIONS],
-[m4_foreach_w([_AM_Option], [$1], [_AM_SET_OPTION(_AM_Option)])])
-
-# _AM_IF_OPTION(OPTION, IF-SET, [IF-NOT-SET])
-# -------------------------------------------
-# Execute IF-SET if OPTION is set, IF-NOT-SET otherwise.
-AC_DEFUN([_AM_IF_OPTION],
-[m4_ifset(_AM_MANGLE_OPTION([$1]), [$2], [$3])])
-
-# Check to make sure that the build environment is sane. -*- Autoconf -*-
-
-# Copyright (C) 1996, 1997, 2000, 2001, 2003, 2005
-# Free Software Foundation, Inc.
-#
-# This file is free software; the Free Software Foundation
-# gives unlimited permission to copy and/or distribute it,
-# with or without modifications, as long as this notice is preserved.
-
-# serial 4
-
-# AM_SANITY_CHECK
-# ---------------
-AC_DEFUN([AM_SANITY_CHECK],
-[AC_MSG_CHECKING([whether build environment is sane])
-# Just in case
-sleep 1
-echo timestamp > conftest.file
-# Do `set' in a subshell so we don't clobber the current shell's
-# arguments. Must try -L first in case configure is actually a
-# symlink; some systems play weird games with the mod time of symlinks
-# (eg FreeBSD returns the mod time of the symlink's containing
-# directory).
-if (
- set X `ls -Lt $srcdir/configure conftest.file 2> /dev/null`
- if test "$[*]" = "X"; then
- # -L didn't work.
- set X `ls -t $srcdir/configure conftest.file`
- fi
- rm -f conftest.file
- if test "$[*]" != "X $srcdir/configure conftest.file" \
- && test "$[*]" != "X conftest.file $srcdir/configure"; then
-
- # If neither matched, then we have a broken ls. This can happen
- # if, for instance, CONFIG_SHELL is bash and it inherits a
- # broken ls alias from the environment. This has actually
- # happened. Such a system could not be considered "sane".
- AC_MSG_ERROR([ls -t appears to fail. Make sure there is not a broken
-alias in your environment])
- fi
-
- test "$[2]" = conftest.file
- )
-then
- # Ok.
- :
-else
- AC_MSG_ERROR([newly created file is older than distributed files!
-Check your system clock])
-fi
-AC_MSG_RESULT(yes)])
-
-# Copyright (C) 2001, 2003, 2005 Free Software Foundation, Inc.
-#
-# This file is free software; the Free Software Foundation
-# gives unlimited permission to copy and/or distribute it,
-# with or without modifications, as long as this notice is preserved.
-
-# AM_PROG_INSTALL_STRIP
-# ---------------------
-# One issue with vendor `install' (even GNU) is that you can't
-# specify the program used to strip binaries. This is especially
-# annoying in cross-compiling environments, where the build's strip
-# is unlikely to handle the host's binaries.
-# Fortunately install-sh will honor a STRIPPROG variable, so we
-# always use install-sh in `make install-strip', and initialize
-# STRIPPROG with the value of the STRIP variable (set by the user).
-AC_DEFUN([AM_PROG_INSTALL_STRIP],
-[AC_REQUIRE([AM_PROG_INSTALL_SH])dnl
-# Installed binaries are usually stripped using `strip' when the user
-# run `make install-strip'. However `strip' might not be the right
-# tool to use in cross-compilation environments, therefore Automake
-# will honor the `STRIP' environment variable to overrule this program.
-dnl Don't test for $cross_compiling = yes, because it might be `maybe'.
-if test "$cross_compiling" != no; then
- AC_CHECK_TOOL([STRIP], [strip], :)
-fi
-INSTALL_STRIP_PROGRAM="\$(install_sh) -c -s"
-AC_SUBST([INSTALL_STRIP_PROGRAM])])
-
-# Copyright (C) 2006 Free Software Foundation, Inc.
-#
-# This file is free software; the Free Software Foundation
-# gives unlimited permission to copy and/or distribute it,
-# with or without modifications, as long as this notice is preserved.
-
-# _AM_SUBST_NOTMAKE(VARIABLE)
-# ---------------------------
-# Prevent Automake from outputting VARIABLE = @VARIABLE@ in Makefile.in.
-# This macro is traced by Automake.
-AC_DEFUN([_AM_SUBST_NOTMAKE])
-
-# Check how to create a tarball. -*- Autoconf -*-
-
-# Copyright (C) 2004, 2005 Free Software Foundation, Inc.
-#
-# This file is free software; the Free Software Foundation
-# gives unlimited permission to copy and/or distribute it,
-# with or without modifications, as long as this notice is preserved.
-
-# serial 2
-
-# _AM_PROG_TAR(FORMAT)
-# --------------------
-# Check how to create a tarball in format FORMAT.
-# FORMAT should be one of `v7', `ustar', or `pax'.
-#
-# Substitute a variable $(am__tar) that is a command
-# writing to stdout a FORMAT-tarball containing the directory
-# $tardir.
-# tardir=directory && $(am__tar) > result.tar
-#
-# Substitute a variable $(am__untar) that extract such
-# a tarball read from stdin.
-# $(am__untar) < result.tar
-AC_DEFUN([_AM_PROG_TAR],
-[# Always define AMTAR for backward compatibility.
-AM_MISSING_PROG([AMTAR], [tar])
-m4_if([$1], [v7],
- [am__tar='${AMTAR} chof - "$$tardir"'; am__untar='${AMTAR} xf -'],
- [m4_case([$1], [ustar],, [pax],,
- [m4_fatal([Unknown tar format])])
-AC_MSG_CHECKING([how to create a $1 tar archive])
-# Loop over all known methods to create a tar archive until one works.
-_am_tools='gnutar m4_if([$1], [ustar], [plaintar]) pax cpio none'
-_am_tools=${am_cv_prog_tar_$1-$_am_tools}
-# Do not fold the above two line into one, because Tru64 sh and
-# Solaris sh will not grok spaces in the rhs of `-'.
-for _am_tool in $_am_tools
-do
- case $_am_tool in
- gnutar)
- for _am_tar in tar gnutar gtar;
- do
- AM_RUN_LOG([$_am_tar --version]) && break
- done
- am__tar="$_am_tar --format=m4_if([$1], [pax], [posix], [$1]) -chf - "'"$$tardir"'
- am__tar_="$_am_tar --format=m4_if([$1], [pax], [posix], [$1]) -chf - "'"$tardir"'
- am__untar="$_am_tar -xf -"
- ;;
- plaintar)
- # Must skip GNU tar: if it does not support --format= it doesn't create
- # ustar tarball either.
- (tar --version) >/dev/null 2>&1 && continue
- am__tar='tar chf - "$$tardir"'
- am__tar_='tar chf - "$tardir"'
- am__untar='tar xf -'
- ;;
- pax)
- am__tar='pax -L -x $1 -w "$$tardir"'
- am__tar_='pax -L -x $1 -w "$tardir"'
- am__untar='pax -r'
- ;;
- cpio)
- am__tar='find "$$tardir" -print | cpio -o -H $1 -L'
- am__tar_='find "$tardir" -print | cpio -o -H $1 -L'
- am__untar='cpio -i -H $1 -d'
- ;;
- none)
- am__tar=false
- am__tar_=false
- am__untar=false
- ;;
- esac
-
- # If the value was cached, stop now. We just wanted to have am__tar
- # and am__untar set.
- test -n "${am_cv_prog_tar_$1}" && break
-
- # tar/untar a dummy directory, and stop if the command works
- rm -rf conftest.dir
- mkdir conftest.dir
- echo GrepMe > conftest.dir/file
- AM_RUN_LOG([tardir=conftest.dir && eval $am__tar_ >conftest.tar])
- rm -rf conftest.dir
- if test -s conftest.tar; then
- AM_RUN_LOG([$am__untar <conftest.tar])
- grep GrepMe conftest.dir/file >/dev/null 2>&1 && break
- fi
-done
-rm -rf conftest.dir
-
-AC_CACHE_VAL([am_cv_prog_tar_$1], [am_cv_prog_tar_$1=$_am_tool])
-AC_MSG_RESULT([$am_cv_prog_tar_$1])])
-AC_SUBST([am__tar])
-AC_SUBST([am__untar])
-]) # _AM_PROG_TAR
-
-m4_include([m4/acx_pthread.m4])
-m4_include([m4/getopt.m4])
-m4_include([m4/gettext.m4])
-m4_include([m4/iconv.m4])
-m4_include([m4/lib-ld.m4])
-m4_include([m4/lib-link.m4])
-m4_include([m4/lib-prefix.m4])
-m4_include([m4/nls.m4])
-m4_include([m4/po.m4])
-m4_include([m4/progtest.m4])
diff --git a/Build/source/utils/xz-4.999.8beta/configure b/Build/source/utils/xz-4.999.8beta/configure
deleted file mode 100755
index f7305677f4e..00000000000
--- a/Build/source/utils/xz-4.999.8beta/configure
+++ /dev/null
@@ -1,30016 +0,0 @@
-#! /bin/sh
-# Guess values for system-dependent variables and create Makefiles.
-# Generated by GNU Autoconf 2.62 for XZ Utils 4.999.8beta.
-#
-# Report bugs to <lasse.collin@tukaani.org>.
-#
-# Copyright (C) 1992, 1993, 1994, 1995, 1996, 1998, 1999, 2000, 2001,
-# 2002, 2003, 2004, 2005, 2006, 2007, 2008 Free Software Foundation, Inc.
-# This configure script is free software; the Free Software Foundation
-# gives unlimited permission to copy, distribute and modify it.
-## --------------------- ##
-## M4sh Initialization. ##
-## --------------------- ##
-
-# Be more Bourne compatible
-DUALCASE=1; export DUALCASE # for MKS sh
-if test -n "${ZSH_VERSION+set}" && (emulate sh) >/dev/null 2>&1; then
- emulate sh
- NULLCMD=:
- # Pre-4.2 versions of Zsh do word splitting on ${1+"$@"}, which
- # is contrary to our usage. Disable this feature.
- alias -g '${1+"$@"}'='"$@"'
- setopt NO_GLOB_SUBST
-else
- case `(set -o) 2>/dev/null` in
- *posix*) set -o posix ;;
-esac
-
-fi
-
-
-
-
-# PATH needs CR
-# Avoid depending upon Character Ranges.
-as_cr_letters='abcdefghijklmnopqrstuvwxyz'
-as_cr_LETTERS='ABCDEFGHIJKLMNOPQRSTUVWXYZ'
-as_cr_Letters=$as_cr_letters$as_cr_LETTERS
-as_cr_digits='0123456789'
-as_cr_alnum=$as_cr_Letters$as_cr_digits
-
-as_nl='
-'
-export as_nl
-# Printing a long string crashes Solaris 7 /usr/bin/printf.
-as_echo='\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\'
-as_echo=$as_echo$as_echo$as_echo$as_echo$as_echo
-as_echo=$as_echo$as_echo$as_echo$as_echo$as_echo$as_echo
-if (test "X`printf %s $as_echo`" = "X$as_echo") 2>/dev/null; then
- as_echo='printf %s\n'
- as_echo_n='printf %s'
-else
- if test "X`(/usr/ucb/echo -n -n $as_echo) 2>/dev/null`" = "X-n $as_echo"; then
- as_echo_body='eval /usr/ucb/echo -n "$1$as_nl"'
- as_echo_n='/usr/ucb/echo -n'
- else
- as_echo_body='eval expr "X$1" : "X\\(.*\\)"'
- as_echo_n_body='eval
- arg=$1;
- case $arg in
- *"$as_nl"*)
- expr "X$arg" : "X\\(.*\\)$as_nl";
- arg=`expr "X$arg" : ".*$as_nl\\(.*\\)"`;;
- esac;
- expr "X$arg" : "X\\(.*\\)" | tr -d "$as_nl"
- '
- export as_echo_n_body
- as_echo_n='sh -c $as_echo_n_body as_echo'
- fi
- export as_echo_body
- as_echo='sh -c $as_echo_body as_echo'
-fi
-
-# The user is always right.
-if test "${PATH_SEPARATOR+set}" != set; then
- PATH_SEPARATOR=:
- (PATH='/bin;/bin'; FPATH=$PATH; sh -c :) >/dev/null 2>&1 && {
- (PATH='/bin:/bin'; FPATH=$PATH; sh -c :) >/dev/null 2>&1 ||
- PATH_SEPARATOR=';'
- }
-fi
-
-# Support unset when possible.
-if ( (MAIL=60; unset MAIL) || exit) >/dev/null 2>&1; then
- as_unset=unset
-else
- as_unset=false
-fi
-
-
-# IFS
-# We need space, tab and new line, in precisely that order. Quoting is
-# there to prevent editors from complaining about space-tab.
-# (If _AS_PATH_WALK were called with IFS unset, it would disable word
-# splitting by setting IFS to empty value.)
-IFS=" "" $as_nl"
-
-# Find who we are. Look in the path if we contain no directory separator.
-case $0 in
- *[\\/]* ) as_myself=$0 ;;
- *) as_save_IFS=$IFS; IFS=$PATH_SEPARATOR
-for as_dir in $PATH
-do
- IFS=$as_save_IFS
- test -z "$as_dir" && as_dir=.
- test -r "$as_dir/$0" && as_myself=$as_dir/$0 && break
-done
-IFS=$as_save_IFS
-
- ;;
-esac
-# We did not find ourselves, most probably we were run as `sh COMMAND'
-# in which case we are not to be found in the path.
-if test "x$as_myself" = x; then
- as_myself=$0
-fi
-if test ! -f "$as_myself"; then
- $as_echo "$as_myself: error: cannot find myself; rerun with an absolute file name" >&2
- { (exit 1); exit 1; }
-fi
-
-# Work around bugs in pre-3.0 UWIN ksh.
-for as_var in ENV MAIL MAILPATH
-do ($as_unset $as_var) >/dev/null 2>&1 && $as_unset $as_var
-done
-PS1='$ '
-PS2='> '
-PS4='+ '
-
-# NLS nuisances.
-LC_ALL=C
-export LC_ALL
-LANGUAGE=C
-export LANGUAGE
-
-# Required to use basename.
-if expr a : '\(a\)' >/dev/null 2>&1 &&
- test "X`expr 00001 : '.*\(...\)'`" = X001; then
- as_expr=expr
-else
- as_expr=false
-fi
-
-if (basename -- /) >/dev/null 2>&1 && test "X`basename -- / 2>&1`" = "X/"; then
- as_basename=basename
-else
- as_basename=false
-fi
-
-
-# Name of the executable.
-as_me=`$as_basename -- "$0" ||
-$as_expr X/"$0" : '.*/\([^/][^/]*\)/*$' \| \
- X"$0" : 'X\(//\)$' \| \
- X"$0" : 'X\(/\)' \| . 2>/dev/null ||
-$as_echo X/"$0" |
- sed '/^.*\/\([^/][^/]*\)\/*$/{
- s//\1/
- q
- }
- /^X\/\(\/\/\)$/{
- s//\1/
- q
- }
- /^X\/\(\/\).*/{
- s//\1/
- q
- }
- s/.*/./; q'`
-
-# CDPATH.
-$as_unset CDPATH
-
-
-if test "x$CONFIG_SHELL" = x; then
- if (eval ":") 2>/dev/null; then
- as_have_required=yes
-else
- as_have_required=no
-fi
-
- if test $as_have_required = yes && (eval ":
-(as_func_return () {
- (exit \$1)
-}
-as_func_success () {
- as_func_return 0
-}
-as_func_failure () {
- as_func_return 1
-}
-as_func_ret_success () {
- return 0
-}
-as_func_ret_failure () {
- return 1
-}
-
-exitcode=0
-if as_func_success; then
- :
-else
- exitcode=1
- echo as_func_success failed.
-fi
-
-if as_func_failure; then
- exitcode=1
- echo as_func_failure succeeded.
-fi
-
-if as_func_ret_success; then
- :
-else
- exitcode=1
- echo as_func_ret_success failed.
-fi
-
-if as_func_ret_failure; then
- exitcode=1
- echo as_func_ret_failure succeeded.
-fi
-
-if ( set x; as_func_ret_success y && test x = \"\$1\" ); then
- :
-else
- exitcode=1
- echo positional parameters were not saved.
-fi
-
-test \$exitcode = 0) || { (exit 1); exit 1; }
-
-(
- as_lineno_1=\$LINENO
- as_lineno_2=\$LINENO
- test \"x\$as_lineno_1\" != \"x\$as_lineno_2\" &&
- test \"x\`expr \$as_lineno_1 + 1\`\" = \"x\$as_lineno_2\") || { (exit 1); exit 1; }
-") 2> /dev/null; then
- :
-else
- as_candidate_shells=
- as_save_IFS=$IFS; IFS=$PATH_SEPARATOR
-for as_dir in /bin$PATH_SEPARATOR/usr/bin$PATH_SEPARATOR$PATH
-do
- IFS=$as_save_IFS
- test -z "$as_dir" && as_dir=.
- case $as_dir in
- /*)
- for as_base in sh bash ksh sh5; do
- as_candidate_shells="$as_candidate_shells $as_dir/$as_base"
- done;;
- esac
-done
-IFS=$as_save_IFS
-
-
- for as_shell in $as_candidate_shells $SHELL; do
- # Try only shells that exist, to save several forks.
- if { test -f "$as_shell" || test -f "$as_shell.exe"; } &&
- { ("$as_shell") 2> /dev/null <<\_ASEOF
-if test -n "${ZSH_VERSION+set}" && (emulate sh) >/dev/null 2>&1; then
- emulate sh
- NULLCMD=:
- # Pre-4.2 versions of Zsh do word splitting on ${1+"$@"}, which
- # is contrary to our usage. Disable this feature.
- alias -g '${1+"$@"}'='"$@"'
- setopt NO_GLOB_SUBST
-else
- case `(set -o) 2>/dev/null` in
- *posix*) set -o posix ;;
-esac
-
-fi
-
-
-:
-_ASEOF
-}; then
- CONFIG_SHELL=$as_shell
- as_have_required=yes
- if { "$as_shell" 2> /dev/null <<\_ASEOF
-if test -n "${ZSH_VERSION+set}" && (emulate sh) >/dev/null 2>&1; then
- emulate sh
- NULLCMD=:
- # Pre-4.2 versions of Zsh do word splitting on ${1+"$@"}, which
- # is contrary to our usage. Disable this feature.
- alias -g '${1+"$@"}'='"$@"'
- setopt NO_GLOB_SUBST
-else
- case `(set -o) 2>/dev/null` in
- *posix*) set -o posix ;;
-esac
-
-fi
-
-
-:
-(as_func_return () {
- (exit $1)
-}
-as_func_success () {
- as_func_return 0
-}
-as_func_failure () {
- as_func_return 1
-}
-as_func_ret_success () {
- return 0
-}
-as_func_ret_failure () {
- return 1
-}
-
-exitcode=0
-if as_func_success; then
- :
-else
- exitcode=1
- echo as_func_success failed.
-fi
-
-if as_func_failure; then
- exitcode=1
- echo as_func_failure succeeded.
-fi
-
-if as_func_ret_success; then
- :
-else
- exitcode=1
- echo as_func_ret_success failed.
-fi
-
-if as_func_ret_failure; then
- exitcode=1
- echo as_func_ret_failure succeeded.
-fi
-
-if ( set x; as_func_ret_success y && test x = "$1" ); then
- :
-else
- exitcode=1
- echo positional parameters were not saved.
-fi
-
-test $exitcode = 0) || { (exit 1); exit 1; }
-
-(
- as_lineno_1=$LINENO
- as_lineno_2=$LINENO
- test "x$as_lineno_1" != "x$as_lineno_2" &&
- test "x`expr $as_lineno_1 + 1`" = "x$as_lineno_2") || { (exit 1); exit 1; }
-
-_ASEOF
-}; then
- break
-fi
-
-fi
-
- done
-
- if test "x$CONFIG_SHELL" != x; then
- for as_var in BASH_ENV ENV
- do ($as_unset $as_var) >/dev/null 2>&1 && $as_unset $as_var
- done
- export CONFIG_SHELL
- exec "$CONFIG_SHELL" "$as_myself" ${1+"$@"}
-fi
-
-
- if test $as_have_required = no; then
- echo This script requires a shell more modern than all the
- echo shells that I found on your system. Please install a
- echo modern shell, or manually run the script under such a
- echo shell if you do have one.
- { (exit 1); exit 1; }
-fi
-
-
-fi
-
-fi
-
-
-
-(eval "as_func_return () {
- (exit \$1)
-}
-as_func_success () {
- as_func_return 0
-}
-as_func_failure () {
- as_func_return 1
-}
-as_func_ret_success () {
- return 0
-}
-as_func_ret_failure () {
- return 1
-}
-
-exitcode=0
-if as_func_success; then
- :
-else
- exitcode=1
- echo as_func_success failed.
-fi
-
-if as_func_failure; then
- exitcode=1
- echo as_func_failure succeeded.
-fi
-
-if as_func_ret_success; then
- :
-else
- exitcode=1
- echo as_func_ret_success failed.
-fi
-
-if as_func_ret_failure; then
- exitcode=1
- echo as_func_ret_failure succeeded.
-fi
-
-if ( set x; as_func_ret_success y && test x = \"\$1\" ); then
- :
-else
- exitcode=1
- echo positional parameters were not saved.
-fi
-
-test \$exitcode = 0") || {
- echo No shell found that supports shell functions.
- echo Please tell bug-autoconf@gnu.org about your system,
- echo including any error possibly output before this message.
- echo This can help us improve future autoconf versions.
- echo Configuration will now proceed without shell functions.
-}
-
-
-
- as_lineno_1=$LINENO
- as_lineno_2=$LINENO
- test "x$as_lineno_1" != "x$as_lineno_2" &&
- test "x`expr $as_lineno_1 + 1`" = "x$as_lineno_2" || {
-
- # Create $as_me.lineno as a copy of $as_myself, but with $LINENO
- # uniformly replaced by the line number. The first 'sed' inserts a
- # line-number line after each line using $LINENO; the second 'sed'
- # does the real work. The second script uses 'N' to pair each
- # line-number line with the line containing $LINENO, and appends
- # trailing '-' during substitution so that $LINENO is not a special
- # case at line end.
- # (Raja R Harinath suggested sed '=', and Paul Eggert wrote the
- # scripts with optimization help from Paolo Bonzini. Blame Lee
- # E. McMahon (1931-1989) for sed's syntax. :-)
- sed -n '
- p
- /[$]LINENO/=
- ' <$as_myself |
- sed '
- s/[$]LINENO.*/&-/
- t lineno
- b
- :lineno
- N
- :loop
- s/[$]LINENO\([^'$as_cr_alnum'_].*\n\)\(.*\)/\2\1\2/
- t loop
- s/-\n.*//
- ' >$as_me.lineno &&
- chmod +x "$as_me.lineno" ||
- { $as_echo "$as_me: error: cannot create $as_me.lineno; rerun with a POSIX shell" >&2
- { (exit 1); exit 1; }; }
-
- # Don't try to exec as it changes $[0], causing all sort of problems
- # (the dirname of $[0] is not the place where we might find the
- # original and so on. Autoconf is especially sensitive to this).
- . "./$as_me.lineno"
- # Exit status is that of the last command.
- exit
-}
-
-
-if (as_dir=`dirname -- /` && test "X$as_dir" = X/) >/dev/null 2>&1; then
- as_dirname=dirname
-else
- as_dirname=false
-fi
-
-ECHO_C= ECHO_N= ECHO_T=
-case `echo -n x` in
--n*)
- case `echo 'x\c'` in
- *c*) ECHO_T=' ';; # ECHO_T is single tab character.
- *) ECHO_C='\c';;
- esac;;
-*)
- ECHO_N='-n';;
-esac
-if expr a : '\(a\)' >/dev/null 2>&1 &&
- test "X`expr 00001 : '.*\(...\)'`" = X001; then
- as_expr=expr
-else
- as_expr=false
-fi
-
-rm -f conf$$ conf$$.exe conf$$.file
-if test -d conf$$.dir; then
- rm -f conf$$.dir/conf$$.file
-else
- rm -f conf$$.dir
- mkdir conf$$.dir 2>/dev/null
-fi
-if (echo >conf$$.file) 2>/dev/null; then
- if ln -s conf$$.file conf$$ 2>/dev/null; then
- as_ln_s='ln -s'
- # ... but there are two gotchas:
- # 1) On MSYS, both `ln -s file dir' and `ln file dir' fail.
- # 2) DJGPP < 2.04 has no symlinks; `ln -s' creates a wrapper executable.
- # In both cases, we have to default to `cp -p'.
- ln -s conf$$.file conf$$.dir 2>/dev/null && test ! -f conf$$.exe ||
- as_ln_s='cp -p'
- elif ln conf$$.file conf$$ 2>/dev/null; then
- as_ln_s=ln
- else
- as_ln_s='cp -p'
- fi
-else
- as_ln_s='cp -p'
-fi
-rm -f conf$$ conf$$.exe conf$$.dir/conf$$.file conf$$.file
-rmdir conf$$.dir 2>/dev/null
-
-if mkdir -p . 2>/dev/null; then
- as_mkdir_p=:
-else
- test -d ./-p && rmdir ./-p
- as_mkdir_p=false
-fi
-
-if test -x / >/dev/null 2>&1; then
- as_test_x='test -x'
-else
- if ls -dL / >/dev/null 2>&1; then
- as_ls_L_option=L
- else
- as_ls_L_option=
- fi
- as_test_x='
- eval sh -c '\''
- if test -d "$1"; then
- test -d "$1/.";
- else
- case $1 in
- -*)set "./$1";;
- esac;
- case `ls -ld'$as_ls_L_option' "$1" 2>/dev/null` in
- ???[sx]*):;;*)false;;esac;fi
- '\'' sh
- '
-fi
-as_executable_p=$as_test_x
-
-# Sed expression to map a string onto a valid CPP name.
-as_tr_cpp="eval sed 'y%*$as_cr_letters%P$as_cr_LETTERS%;s%[^_$as_cr_alnum]%_%g'"
-
-# Sed expression to map a string onto a valid variable name.
-as_tr_sh="eval sed 'y%*+%pp%;s%[^_$as_cr_alnum]%_%g'"
-
-
-
-
-# Check that we are running under the correct shell.
-SHELL=${CONFIG_SHELL-/bin/sh}
-
-case X$ECHO in
-X*--fallback-echo)
- # Remove one level of quotation (which was required for Make).
- ECHO=`echo "$ECHO" | sed 's,\\\\\$\\$0,'$0','`
- ;;
-esac
-
-echo=${ECHO-echo}
-if test "X$1" = X--no-reexec; then
- # Discard the --no-reexec flag, and continue.
- shift
-elif test "X$1" = X--fallback-echo; then
- # Avoid inline document here, it may be left over
- :
-elif test "X`($echo '\t') 2>/dev/null`" = 'X\t' ; then
- # Yippee, $echo works!
- :
-else
- # Restart under the correct shell.
- exec $SHELL "$0" --no-reexec ${1+"$@"}
-fi
-
-if test "X$1" = X--fallback-echo; then
- # used as fallback echo
- shift
- cat <<EOF
-$*
-EOF
- exit 0
-fi
-
-# The HP-UX ksh and POSIX shell print the target directory to stdout
-# if CDPATH is set.
-(unset CDPATH) >/dev/null 2>&1 && unset CDPATH
-
-if test -z "$ECHO"; then
-if test "X${echo_test_string+set}" != Xset; then
-# find a string as large as possible, as long as the shell can cope with it
- for cmd in 'sed 50q "$0"' 'sed 20q "$0"' 'sed 10q "$0"' 'sed 2q "$0"' 'echo test'; do
- # expected sizes: less than 2Kb, 1Kb, 512 bytes, 16 bytes, ...
- if (echo_test_string=`eval $cmd`) 2>/dev/null &&
- echo_test_string=`eval $cmd` &&
- (test "X$echo_test_string" = "X$echo_test_string") 2>/dev/null
- then
- break
- fi
- done
-fi
-
-if test "X`($echo '\t') 2>/dev/null`" = 'X\t' &&
- echo_testing_string=`($echo "$echo_test_string") 2>/dev/null` &&
- test "X$echo_testing_string" = "X$echo_test_string"; then
- :
-else
- # The Solaris, AIX, and Digital Unix default echo programs unquote
- # backslashes. This makes it impossible to quote backslashes using
- # echo "$something" | sed 's/\\/\\\\/g'
- #
- # So, first we look for a working echo in the user's PATH.
-
- lt_save_ifs="$IFS"; IFS=$PATH_SEPARATOR
- for dir in $PATH /usr/ucb; do
- IFS="$lt_save_ifs"
- if (test -f $dir/echo || test -f $dir/echo$ac_exeext) &&
- test "X`($dir/echo '\t') 2>/dev/null`" = 'X\t' &&
- echo_testing_string=`($dir/echo "$echo_test_string") 2>/dev/null` &&
- test "X$echo_testing_string" = "X$echo_test_string"; then
- echo="$dir/echo"
- break
- fi
- done
- IFS="$lt_save_ifs"
-
- if test "X$echo" = Xecho; then
- # We didn't find a better echo, so look for alternatives.
- if test "X`(print -r '\t') 2>/dev/null`" = 'X\t' &&
- echo_testing_string=`(print -r "$echo_test_string") 2>/dev/null` &&
- test "X$echo_testing_string" = "X$echo_test_string"; then
- # This shell has a builtin print -r that does the trick.
- echo='print -r'
- elif (test -f /bin/ksh || test -f /bin/ksh$ac_exeext) &&
- test "X$CONFIG_SHELL" != X/bin/ksh; then
- # If we have ksh, try running configure again with it.
- ORIGINAL_CONFIG_SHELL=${CONFIG_SHELL-/bin/sh}
- export ORIGINAL_CONFIG_SHELL
- CONFIG_SHELL=/bin/ksh
- export CONFIG_SHELL
- exec $CONFIG_SHELL "$0" --no-reexec ${1+"$@"}
- else
- # Try using printf.
- echo='printf %s\n'
- if test "X`($echo '\t') 2>/dev/null`" = 'X\t' &&
- echo_testing_string=`($echo "$echo_test_string") 2>/dev/null` &&
- test "X$echo_testing_string" = "X$echo_test_string"; then
- # Cool, printf works
- :
- elif echo_testing_string=`($ORIGINAL_CONFIG_SHELL "$0" --fallback-echo '\t') 2>/dev/null` &&
- test "X$echo_testing_string" = 'X\t' &&
- echo_testing_string=`($ORIGINAL_CONFIG_SHELL "$0" --fallback-echo "$echo_test_string") 2>/dev/null` &&
- test "X$echo_testing_string" = "X$echo_test_string"; then
- CONFIG_SHELL=$ORIGINAL_CONFIG_SHELL
- export CONFIG_SHELL
- SHELL="$CONFIG_SHELL"
- export SHELL
- echo="$CONFIG_SHELL $0 --fallback-echo"
- elif echo_testing_string=`($CONFIG_SHELL "$0" --fallback-echo '\t') 2>/dev/null` &&
- test "X$echo_testing_string" = 'X\t' &&
- echo_testing_string=`($CONFIG_SHELL "$0" --fallback-echo "$echo_test_string") 2>/dev/null` &&
- test "X$echo_testing_string" = "X$echo_test_string"; then
- echo="$CONFIG_SHELL $0 --fallback-echo"
- else
- # maybe with a smaller string...
- prev=:
-
- for cmd in 'echo test' 'sed 2q "$0"' 'sed 10q "$0"' 'sed 20q "$0"' 'sed 50q "$0"'; do
- if (test "X$echo_test_string" = "X`eval $cmd`") 2>/dev/null
- then
- break
- fi
- prev="$cmd"
- done
-
- if test "$prev" != 'sed 50q "$0"'; then
- echo_test_string=`eval $prev`
- export echo_test_string
- exec ${ORIGINAL_CONFIG_SHELL-${CONFIG_SHELL-/bin/sh}} "$0" ${1+"$@"}
- else
- # Oops. We lost completely, so just stick with echo.
- echo=echo
- fi
- fi
- fi
- fi
-fi
-fi
-
-# Copy echo and quote the copy suitably for passing to libtool from
-# the Makefile, instead of quoting the original, which is used later.
-ECHO=$echo
-if test "X$ECHO" = "X$CONFIG_SHELL $0 --fallback-echo"; then
- ECHO="$CONFIG_SHELL \\\$\$0 --fallback-echo"
-fi
-
-
-
-
-tagnames=${tagnames+${tagnames},}CXX
-
-tagnames=${tagnames+${tagnames},}F77
-
-exec 7<&0 </dev/null 6>&1
-
-# Name of the host.
-# hostname on some systems (SVR3.2, Linux) returns a bogus exit status,
-# so uname gets run too.
-ac_hostname=`(hostname || uname -n) 2>/dev/null | sed 1q`
-
-#
-# Initializations.
-#
-ac_default_prefix=/usr/local
-ac_clean_files=
-ac_config_libobj_dir=.
-LIBOBJS=
-cross_compiling=no
-subdirs=
-MFLAGS=
-MAKEFLAGS=
-SHELL=${CONFIG_SHELL-/bin/sh}
-
-# Identity of this package.
-PACKAGE_NAME='XZ Utils'
-PACKAGE_TARNAME='xz'
-PACKAGE_VERSION='4.999.8beta'
-PACKAGE_STRING='XZ Utils 4.999.8beta'
-PACKAGE_BUGREPORT='lasse.collin@tukaani.org'
-
-ac_unique_file="src/liblzma/common/common.h"
-# Factoring default headers for most tests.
-ac_includes_default="\
-#include <stdio.h>
-#ifdef HAVE_SYS_TYPES_H
-# include <sys/types.h>
-#endif
-#ifdef HAVE_SYS_STAT_H
-# include <sys/stat.h>
-#endif
-#ifdef STDC_HEADERS
-# include <stdlib.h>
-# include <stddef.h>
-#else
-# ifdef HAVE_STDLIB_H
-# include <stdlib.h>
-# endif
-#endif
-#ifdef HAVE_STRING_H
-# if !defined STDC_HEADERS && defined HAVE_MEMORY_H
-# include <memory.h>
-# endif
-# include <string.h>
-#endif
-#ifdef HAVE_STRINGS_H
-# include <strings.h>
-#endif
-#ifdef HAVE_INTTYPES_H
-# include <inttypes.h>
-#endif
-#ifdef HAVE_STDINT_H
-# include <stdint.h>
-#endif
-#ifdef HAVE_UNISTD_H
-# include <unistd.h>
-#endif"
-
-gt_needs=
-ac_subst_vars='SHELL
-PATH_SEPARATOR
-PACKAGE_NAME
-PACKAGE_TARNAME
-PACKAGE_VERSION
-PACKAGE_STRING
-PACKAGE_BUGREPORT
-exec_prefix
-prefix
-program_transform_name
-bindir
-sbindir
-libexecdir
-datarootdir
-datadir
-sysconfdir
-sharedstatedir
-localstatedir
-includedir
-oldincludedir
-docdir
-infodir
-htmldir
-dvidir
-pdfdir
-psdir
-libdir
-localedir
-mandir
-DEFS
-ECHO_C
-ECHO_N
-ECHO_T
-LIBS
-build_alias
-host_alias
-target_alias
-build
-build_cpu
-build_vendor
-build_os
-host
-host_cpu
-host_vendor
-host_os
-COND_MAIN_ENCODER_TRUE
-COND_MAIN_ENCODER_FALSE
-COND_MAIN_DECODER_TRUE
-COND_MAIN_DECODER_FALSE
-COND_FILTER_LZMA1_TRUE
-COND_FILTER_LZMA1_FALSE
-COND_ENCODER_LZMA1_TRUE
-COND_ENCODER_LZMA1_FALSE
-COND_DECODER_LZMA1_TRUE
-COND_DECODER_LZMA1_FALSE
-COND_FILTER_LZMA2_TRUE
-COND_FILTER_LZMA2_FALSE
-COND_ENCODER_LZMA2_TRUE
-COND_ENCODER_LZMA2_FALSE
-COND_DECODER_LZMA2_TRUE
-COND_DECODER_LZMA2_FALSE
-COND_FILTER_SUBBLOCK_TRUE
-COND_FILTER_SUBBLOCK_FALSE
-COND_ENCODER_SUBBLOCK_TRUE
-COND_ENCODER_SUBBLOCK_FALSE
-COND_DECODER_SUBBLOCK_TRUE
-COND_DECODER_SUBBLOCK_FALSE
-COND_FILTER_DELTA_TRUE
-COND_FILTER_DELTA_FALSE
-COND_ENCODER_DELTA_TRUE
-COND_ENCODER_DELTA_FALSE
-COND_DECODER_DELTA_TRUE
-COND_DECODER_DELTA_FALSE
-COND_FILTER_X86_TRUE
-COND_FILTER_X86_FALSE
-COND_ENCODER_X86_TRUE
-COND_ENCODER_X86_FALSE
-COND_DECODER_X86_TRUE
-COND_DECODER_X86_FALSE
-COND_FILTER_POWERPC_TRUE
-COND_FILTER_POWERPC_FALSE
-COND_ENCODER_POWERPC_TRUE
-COND_ENCODER_POWERPC_FALSE
-COND_DECODER_POWERPC_TRUE
-COND_DECODER_POWERPC_FALSE
-COND_FILTER_IA64_TRUE
-COND_FILTER_IA64_FALSE
-COND_ENCODER_IA64_TRUE
-COND_ENCODER_IA64_FALSE
-COND_DECODER_IA64_TRUE
-COND_DECODER_IA64_FALSE
-COND_FILTER_ARM_TRUE
-COND_FILTER_ARM_FALSE
-COND_ENCODER_ARM_TRUE
-COND_ENCODER_ARM_FALSE
-COND_DECODER_ARM_TRUE
-COND_DECODER_ARM_FALSE
-COND_FILTER_ARMTHUMB_TRUE
-COND_FILTER_ARMTHUMB_FALSE
-COND_ENCODER_ARMTHUMB_TRUE
-COND_ENCODER_ARMTHUMB_FALSE
-COND_DECODER_ARMTHUMB_TRUE
-COND_DECODER_ARMTHUMB_FALSE
-COND_FILTER_SPARC_TRUE
-COND_FILTER_SPARC_FALSE
-COND_ENCODER_SPARC_TRUE
-COND_ENCODER_SPARC_FALSE
-COND_DECODER_SPARC_TRUE
-COND_DECODER_SPARC_FALSE
-COND_FILTER_SIMPLE_TRUE
-COND_FILTER_SIMPLE_FALSE
-COND_ENCODER_SIMPLE_TRUE
-COND_ENCODER_SIMPLE_FALSE
-COND_DECODER_SIMPLE_TRUE
-COND_DECODER_SIMPLE_FALSE
-COND_FILTER_LZ_TRUE
-COND_FILTER_LZ_FALSE
-COND_ENCODER_LZ_TRUE
-COND_ENCODER_LZ_FALSE
-COND_DECODER_LZ_TRUE
-COND_DECODER_LZ_FALSE
-COND_CHECK_CRC32_TRUE
-COND_CHECK_CRC32_FALSE
-COND_CHECK_CRC64_TRUE
-COND_CHECK_CRC64_FALSE
-COND_CHECK_SHA256_TRUE
-COND_CHECK_SHA256_FALSE
-COND_ASM_X86_TRUE
-COND_ASM_X86_FALSE
-COND_ASM_X86_64_TRUE
-COND_ASM_X86_64_FALSE
-COND_SMALL_TRUE
-COND_SMALL_FALSE
-INSTALL_PROGRAM
-INSTALL_SCRIPT
-INSTALL_DATA
-am__isrc
-CYGPATH_W
-PACKAGE
-VERSION
-ACLOCAL
-AUTOCONF
-AUTOMAKE
-AUTOHEADER
-MAKEINFO
-install_sh
-STRIP
-INSTALL_STRIP_PROGRAM
-MKDIR_P
-mkdir_p
-AWK
-SET_MAKE
-am__leading_dot
-AMTAR
-am__tar
-am__untar
-LN_S
-CC
-CFLAGS
-LDFLAGS
-CPPFLAGS
-ac_ct_CC
-EXEEXT
-OBJEXT
-DEPDIR
-am__include
-am__quote
-AMDEP_TRUE
-AMDEP_FALSE
-AMDEPBACKSLASH
-CCDEPMODE
-am__fastdepCC_TRUE
-am__fastdepCC_FALSE
-CCAS
-CCASFLAGS
-CCASDEPMODE
-am__fastdepCCAS_TRUE
-am__fastdepCCAS_FALSE
-CPP
-GREP
-EGREP
-acx_pthread_config
-PTHREAD_CC
-PTHREAD_LIBS
-PTHREAD_CFLAGS
-SED
-ECHO
-AR
-RANLIB
-DSYMUTIL
-NMEDIT
-CXX
-CXXFLAGS
-ac_ct_CXX
-CXXDEPMODE
-am__fastdepCXX_TRUE
-am__fastdepCXX_FALSE
-CXXCPP
-F77
-FFLAGS
-ac_ct_F77
-LIBTOOL
-USE_NLS
-MSGFMT
-GMSGFMT
-MSGFMT_015
-GMSGFMT_015
-XGETTEXT
-XGETTEXT_015
-MSGMERGE
-INTL_MACOSX_LIBS
-LIBICONV
-LTLIBICONV
-INTLLIBS
-LIBINTL
-LTLIBINTL
-POSUB
-LIBOBJS
-GETOPT_H
-CFLAG_VISIBILITY
-HAVE_VISIBILITY
-COND_WNO_UNINITIALIZED_TRUE
-COND_WNO_UNINITIALIZED_FALSE
-COND_GNULIB_TRUE
-COND_GNULIB_FALSE
-LTLIBOBJS'
-ac_subst_files=''
-ac_user_opts='
-enable_option_checking
-enable_debug
-enable_encoder
-enable_decoder
-enable_encoders
-enable_decoders
-enable_match_finders
-enable_checks
-enable_assembler
-enable_unaligned_access
-enable_small
-enable_threads
-enable_dependency_tracking
-enable_shared
-enable_static
-enable_fast_install
-with_gnu_ld
-enable_libtool_lock
-with_pic
-with_tags
-enable_nls
-enable_rpath
-with_libiconv_prefix
-with_libintl_prefix
-enable_largefile
-enable_werror
-'
- ac_precious_vars='build_alias
-host_alias
-target_alias
-CC
-CFLAGS
-LDFLAGS
-LIBS
-CPPFLAGS
-CCAS
-CCASFLAGS
-CPP
-CXX
-CXXFLAGS
-CCC
-CXXCPP
-F77
-FFLAGS'
-
-
-# Initialize some variables set by options.
-ac_init_help=
-ac_init_version=false
-ac_unrecognized_opts=
-ac_unrecognized_sep=
-# The variables have the same names as the options, with
-# dashes changed to underlines.
-cache_file=/dev/null
-exec_prefix=NONE
-no_create=
-no_recursion=
-prefix=NONE
-program_prefix=NONE
-program_suffix=NONE
-program_transform_name=s,x,x,
-silent=
-site=
-srcdir=
-verbose=
-x_includes=NONE
-x_libraries=NONE
-
-# Installation directory options.
-# These are left unexpanded so users can "make install exec_prefix=/foo"
-# and all the variables that are supposed to be based on exec_prefix
-# by default will actually change.
-# Use braces instead of parens because sh, perl, etc. also accept them.
-# (The list follows the same order as the GNU Coding Standards.)
-bindir='${exec_prefix}/bin'
-sbindir='${exec_prefix}/sbin'
-libexecdir='${exec_prefix}/libexec'
-datarootdir='${prefix}/share'
-datadir='${datarootdir}'
-sysconfdir='${prefix}/etc'
-sharedstatedir='${prefix}/com'
-localstatedir='${prefix}/var'
-includedir='${prefix}/include'
-oldincludedir='/usr/include'
-docdir='${datarootdir}/doc/${PACKAGE_TARNAME}'
-infodir='${datarootdir}/info'
-htmldir='${docdir}'
-dvidir='${docdir}'
-pdfdir='${docdir}'
-psdir='${docdir}'
-libdir='${exec_prefix}/lib'
-localedir='${datarootdir}/locale'
-mandir='${datarootdir}/man'
-
-ac_prev=
-ac_dashdash=
-for ac_option
-do
- # If the previous option needs an argument, assign it.
- if test -n "$ac_prev"; then
- eval $ac_prev=\$ac_option
- ac_prev=
- continue
- fi
-
- case $ac_option in
- *=*) ac_optarg=`expr "X$ac_option" : '[^=]*=\(.*\)'` ;;
- *) ac_optarg=yes ;;
- esac
-
- # Accept the important Cygnus configure options, so we can diagnose typos.
-
- case $ac_dashdash$ac_option in
- --)
- ac_dashdash=yes ;;
-
- -bindir | --bindir | --bindi | --bind | --bin | --bi)
- ac_prev=bindir ;;
- -bindir=* | --bindir=* | --bindi=* | --bind=* | --bin=* | --bi=*)
- bindir=$ac_optarg ;;
-
- -build | --build | --buil | --bui | --bu)
- ac_prev=build_alias ;;
- -build=* | --build=* | --buil=* | --bui=* | --bu=*)
- build_alias=$ac_optarg ;;
-
- -cache-file | --cache-file | --cache-fil | --cache-fi \
- | --cache-f | --cache- | --cache | --cach | --cac | --ca | --c)
- ac_prev=cache_file ;;
- -cache-file=* | --cache-file=* | --cache-fil=* | --cache-fi=* \
- | --cache-f=* | --cache-=* | --cache=* | --cach=* | --cac=* | --ca=* | --c=*)
- cache_file=$ac_optarg ;;
-
- --config-cache | -C)
- cache_file=config.cache ;;
-
- -datadir | --datadir | --datadi | --datad)
- ac_prev=datadir ;;
- -datadir=* | --datadir=* | --datadi=* | --datad=*)
- datadir=$ac_optarg ;;
-
- -datarootdir | --datarootdir | --datarootdi | --datarootd | --dataroot \
- | --dataroo | --dataro | --datar)
- ac_prev=datarootdir ;;
- -datarootdir=* | --datarootdir=* | --datarootdi=* | --datarootd=* \
- | --dataroot=* | --dataroo=* | --dataro=* | --datar=*)
- datarootdir=$ac_optarg ;;
-
- -disable-* | --disable-*)
- ac_useropt=`expr "x$ac_option" : 'x-*disable-\(.*\)'`
- # Reject names that are not valid shell variable names.
- expr "x$ac_useropt" : ".*[^-+._$as_cr_alnum]" >/dev/null &&
- { $as_echo "$as_me: error: invalid feature name: $ac_useropt" >&2
- { (exit 1); exit 1; }; }
- ac_useropt_orig=$ac_useropt
- ac_useropt=`$as_echo "$ac_useropt" | sed 's/[-+.]/_/g'`
- case $ac_user_opts in
- *"
-"enable_$ac_useropt"
-"*) ;;
- *) ac_unrecognized_opts="$ac_unrecognized_opts$ac_unrecognized_sep--disable-$ac_useropt_orig"
- ac_unrecognized_sep=', ';;
- esac
- eval enable_$ac_useropt=no ;;
-
- -docdir | --docdir | --docdi | --doc | --do)
- ac_prev=docdir ;;
- -docdir=* | --docdir=* | --docdi=* | --doc=* | --do=*)
- docdir=$ac_optarg ;;
-
- -dvidir | --dvidir | --dvidi | --dvid | --dvi | --dv)
- ac_prev=dvidir ;;
- -dvidir=* | --dvidir=* | --dvidi=* | --dvid=* | --dvi=* | --dv=*)
- dvidir=$ac_optarg ;;
-
- -enable-* | --enable-*)
- ac_useropt=`expr "x$ac_option" : 'x-*enable-\([^=]*\)'`
- # Reject names that are not valid shell variable names.
- expr "x$ac_useropt" : ".*[^-+._$as_cr_alnum]" >/dev/null &&
- { $as_echo "$as_me: error: invalid feature name: $ac_useropt" >&2
- { (exit 1); exit 1; }; }
- ac_useropt_orig=$ac_useropt
- ac_useropt=`$as_echo "$ac_useropt" | sed 's/[-+.]/_/g'`
- case $ac_user_opts in
- *"
-"enable_$ac_useropt"
-"*) ;;
- *) ac_unrecognized_opts="$ac_unrecognized_opts$ac_unrecognized_sep--enable-$ac_useropt_orig"
- ac_unrecognized_sep=', ';;
- esac
- eval enable_$ac_useropt=\$ac_optarg ;;
-
- -exec-prefix | --exec_prefix | --exec-prefix | --exec-prefi \
- | --exec-pref | --exec-pre | --exec-pr | --exec-p | --exec- \
- | --exec | --exe | --ex)
- ac_prev=exec_prefix ;;
- -exec-prefix=* | --exec_prefix=* | --exec-prefix=* | --exec-prefi=* \
- | --exec-pref=* | --exec-pre=* | --exec-pr=* | --exec-p=* | --exec-=* \
- | --exec=* | --exe=* | --ex=*)
- exec_prefix=$ac_optarg ;;
-
- -gas | --gas | --ga | --g)
- # Obsolete; use --with-gas.
- with_gas=yes ;;
-
- -help | --help | --hel | --he | -h)
- ac_init_help=long ;;
- -help=r* | --help=r* | --hel=r* | --he=r* | -hr*)
- ac_init_help=recursive ;;
- -help=s* | --help=s* | --hel=s* | --he=s* | -hs*)
- ac_init_help=short ;;
-
- -host | --host | --hos | --ho)
- ac_prev=host_alias ;;
- -host=* | --host=* | --hos=* | --ho=*)
- host_alias=$ac_optarg ;;
-
- -htmldir | --htmldir | --htmldi | --htmld | --html | --htm | --ht)
- ac_prev=htmldir ;;
- -htmldir=* | --htmldir=* | --htmldi=* | --htmld=* | --html=* | --htm=* \
- | --ht=*)
- htmldir=$ac_optarg ;;
-
- -includedir | --includedir | --includedi | --included | --include \
- | --includ | --inclu | --incl | --inc)
- ac_prev=includedir ;;
- -includedir=* | --includedir=* | --includedi=* | --included=* | --include=* \
- | --includ=* | --inclu=* | --incl=* | --inc=*)
- includedir=$ac_optarg ;;
-
- -infodir | --infodir | --infodi | --infod | --info | --inf)
- ac_prev=infodir ;;
- -infodir=* | --infodir=* | --infodi=* | --infod=* | --info=* | --inf=*)
- infodir=$ac_optarg ;;
-
- -libdir | --libdir | --libdi | --libd)
- ac_prev=libdir ;;
- -libdir=* | --libdir=* | --libdi=* | --libd=*)
- libdir=$ac_optarg ;;
-
- -libexecdir | --libexecdir | --libexecdi | --libexecd | --libexec \
- | --libexe | --libex | --libe)
- ac_prev=libexecdir ;;
- -libexecdir=* | --libexecdir=* | --libexecdi=* | --libexecd=* | --libexec=* \
- | --libexe=* | --libex=* | --libe=*)
- libexecdir=$ac_optarg ;;
-
- -localedir | --localedir | --localedi | --localed | --locale)
- ac_prev=localedir ;;
- -localedir=* | --localedir=* | --localedi=* | --localed=* | --locale=*)
- localedir=$ac_optarg ;;
-
- -localstatedir | --localstatedir | --localstatedi | --localstated \
- | --localstate | --localstat | --localsta | --localst | --locals)
- ac_prev=localstatedir ;;
- -localstatedir=* | --localstatedir=* | --localstatedi=* | --localstated=* \
- | --localstate=* | --localstat=* | --localsta=* | --localst=* | --locals=*)
- localstatedir=$ac_optarg ;;
-
- -mandir | --mandir | --mandi | --mand | --man | --ma | --m)
- ac_prev=mandir ;;
- -mandir=* | --mandir=* | --mandi=* | --mand=* | --man=* | --ma=* | --m=*)
- mandir=$ac_optarg ;;
-
- -nfp | --nfp | --nf)
- # Obsolete; use --without-fp.
- with_fp=no ;;
-
- -no-create | --no-create | --no-creat | --no-crea | --no-cre \
- | --no-cr | --no-c | -n)
- no_create=yes ;;
-
- -no-recursion | --no-recursion | --no-recursio | --no-recursi \
- | --no-recurs | --no-recur | --no-recu | --no-rec | --no-re | --no-r)
- no_recursion=yes ;;
-
- -oldincludedir | --oldincludedir | --oldincludedi | --oldincluded \
- | --oldinclude | --oldinclud | --oldinclu | --oldincl | --oldinc \
- | --oldin | --oldi | --old | --ol | --o)
- ac_prev=oldincludedir ;;
- -oldincludedir=* | --oldincludedir=* | --oldincludedi=* | --oldincluded=* \
- | --oldinclude=* | --oldinclud=* | --oldinclu=* | --oldincl=* | --oldinc=* \
- | --oldin=* | --oldi=* | --old=* | --ol=* | --o=*)
- oldincludedir=$ac_optarg ;;
-
- -prefix | --prefix | --prefi | --pref | --pre | --pr | --p)
- ac_prev=prefix ;;
- -prefix=* | --prefix=* | --prefi=* | --pref=* | --pre=* | --pr=* | --p=*)
- prefix=$ac_optarg ;;
-
- -program-prefix | --program-prefix | --program-prefi | --program-pref \
- | --program-pre | --program-pr | --program-p)
- ac_prev=program_prefix ;;
- -program-prefix=* | --program-prefix=* | --program-prefi=* \
- | --program-pref=* | --program-pre=* | --program-pr=* | --program-p=*)
- program_prefix=$ac_optarg ;;
-
- -program-suffix | --program-suffix | --program-suffi | --program-suff \
- | --program-suf | --program-su | --program-s)
- ac_prev=program_suffix ;;
- -program-suffix=* | --program-suffix=* | --program-suffi=* \
- | --program-suff=* | --program-suf=* | --program-su=* | --program-s=*)
- program_suffix=$ac_optarg ;;
-
- -program-transform-name | --program-transform-name \
- | --program-transform-nam | --program-transform-na \
- | --program-transform-n | --program-transform- \
- | --program-transform | --program-transfor \
- | --program-transfo | --program-transf \
- | --program-trans | --program-tran \
- | --progr-tra | --program-tr | --program-t)
- ac_prev=program_transform_name ;;
- -program-transform-name=* | --program-transform-name=* \
- | --program-transform-nam=* | --program-transform-na=* \
- | --program-transform-n=* | --program-transform-=* \
- | --program-transform=* | --program-transfor=* \
- | --program-transfo=* | --program-transf=* \
- | --program-trans=* | --program-tran=* \
- | --progr-tra=* | --program-tr=* | --program-t=*)
- program_transform_name=$ac_optarg ;;
-
- -pdfdir | --pdfdir | --pdfdi | --pdfd | --pdf | --pd)
- ac_prev=pdfdir ;;
- -pdfdir=* | --pdfdir=* | --pdfdi=* | --pdfd=* | --pdf=* | --pd=*)
- pdfdir=$ac_optarg ;;
-
- -psdir | --psdir | --psdi | --psd | --ps)
- ac_prev=psdir ;;
- -psdir=* | --psdir=* | --psdi=* | --psd=* | --ps=*)
- psdir=$ac_optarg ;;
-
- -q | -quiet | --quiet | --quie | --qui | --qu | --q \
- | -silent | --silent | --silen | --sile | --sil)
- silent=yes ;;
-
- -sbindir | --sbindir | --sbindi | --sbind | --sbin | --sbi | --sb)
- ac_prev=sbindir ;;
- -sbindir=* | --sbindir=* | --sbindi=* | --sbind=* | --sbin=* \
- | --sbi=* | --sb=*)
- sbindir=$ac_optarg ;;
-
- -sharedstatedir | --sharedstatedir | --sharedstatedi \
- | --sharedstated | --sharedstate | --sharedstat | --sharedsta \
- | --sharedst | --shareds | --shared | --share | --shar \
- | --sha | --sh)
- ac_prev=sharedstatedir ;;
- -sharedstatedir=* | --sharedstatedir=* | --sharedstatedi=* \
- | --sharedstated=* | --sharedstate=* | --sharedstat=* | --sharedsta=* \
- | --sharedst=* | --shareds=* | --shared=* | --share=* | --shar=* \
- | --sha=* | --sh=*)
- sharedstatedir=$ac_optarg ;;
-
- -site | --site | --sit)
- ac_prev=site ;;
- -site=* | --site=* | --sit=*)
- site=$ac_optarg ;;
-
- -srcdir | --srcdir | --srcdi | --srcd | --src | --sr)
- ac_prev=srcdir ;;
- -srcdir=* | --srcdir=* | --srcdi=* | --srcd=* | --src=* | --sr=*)
- srcdir=$ac_optarg ;;
-
- -sysconfdir | --sysconfdir | --sysconfdi | --sysconfd | --sysconf \
- | --syscon | --sysco | --sysc | --sys | --sy)
- ac_prev=sysconfdir ;;
- -sysconfdir=* | --sysconfdir=* | --sysconfdi=* | --sysconfd=* | --sysconf=* \
- | --syscon=* | --sysco=* | --sysc=* | --sys=* | --sy=*)
- sysconfdir=$ac_optarg ;;
-
- -target | --target | --targe | --targ | --tar | --ta | --t)
- ac_prev=target_alias ;;
- -target=* | --target=* | --targe=* | --targ=* | --tar=* | --ta=* | --t=*)
- target_alias=$ac_optarg ;;
-
- -v | -verbose | --verbose | --verbos | --verbo | --verb)
- verbose=yes ;;
-
- -version | --version | --versio | --versi | --vers | -V)
- ac_init_version=: ;;
-
- -with-* | --with-*)
- ac_useropt=`expr "x$ac_option" : 'x-*with-\([^=]*\)'`
- # Reject names that are not valid shell variable names.
- expr "x$ac_useropt" : ".*[^-+._$as_cr_alnum]" >/dev/null &&
- { $as_echo "$as_me: error: invalid package name: $ac_useropt" >&2
- { (exit 1); exit 1; }; }
- ac_useropt_orig=$ac_useropt
- ac_useropt=`$as_echo "$ac_useropt" | sed 's/[-+.]/_/g'`
- case $ac_user_opts in
- *"
-"with_$ac_useropt"
-"*) ;;
- *) ac_unrecognized_opts="$ac_unrecognized_opts$ac_unrecognized_sep--with-$ac_useropt_orig"
- ac_unrecognized_sep=', ';;
- esac
- eval with_$ac_useropt=\$ac_optarg ;;
-
- -without-* | --without-*)
- ac_useropt=`expr "x$ac_option" : 'x-*without-\(.*\)'`
- # Reject names that are not valid shell variable names.
- expr "x$ac_useropt" : ".*[^-+._$as_cr_alnum]" >/dev/null &&
- { $as_echo "$as_me: error: invalid package name: $ac_useropt" >&2
- { (exit 1); exit 1; }; }
- ac_useropt_orig=$ac_useropt
- ac_useropt=`$as_echo "$ac_useropt" | sed 's/[-+.]/_/g'`
- case $ac_user_opts in
- *"
-"with_$ac_useropt"
-"*) ;;
- *) ac_unrecognized_opts="$ac_unrecognized_opts$ac_unrecognized_sep--without-$ac_useropt_orig"
- ac_unrecognized_sep=', ';;
- esac
- eval with_$ac_useropt=no ;;
-
- --x)
- # Obsolete; use --with-x.
- with_x=yes ;;
-
- -x-includes | --x-includes | --x-include | --x-includ | --x-inclu \
- | --x-incl | --x-inc | --x-in | --x-i)
- ac_prev=x_includes ;;
- -x-includes=* | --x-includes=* | --x-include=* | --x-includ=* | --x-inclu=* \
- | --x-incl=* | --x-inc=* | --x-in=* | --x-i=*)
- x_includes=$ac_optarg ;;
-
- -x-libraries | --x-libraries | --x-librarie | --x-librari \
- | --x-librar | --x-libra | --x-libr | --x-lib | --x-li | --x-l)
- ac_prev=x_libraries ;;
- -x-libraries=* | --x-libraries=* | --x-librarie=* | --x-librari=* \
- | --x-librar=* | --x-libra=* | --x-libr=* | --x-lib=* | --x-li=* | --x-l=*)
- x_libraries=$ac_optarg ;;
-
- -*) { $as_echo "$as_me: error: unrecognized option: $ac_option
-Try \`$0 --help' for more information." >&2
- { (exit 1); exit 1; }; }
- ;;
-
- *=*)
- ac_envvar=`expr "x$ac_option" : 'x\([^=]*\)='`
- # Reject names that are not valid shell variable names.
- expr "x$ac_envvar" : ".*[^_$as_cr_alnum]" >/dev/null &&
- { $as_echo "$as_me: error: invalid variable name: $ac_envvar" >&2
- { (exit 1); exit 1; }; }
- eval $ac_envvar=\$ac_optarg
- export $ac_envvar ;;
-
- *)
- # FIXME: should be removed in autoconf 3.0.
- $as_echo "$as_me: WARNING: you should use --build, --host, --target" >&2
- expr "x$ac_option" : ".*[^-._$as_cr_alnum]" >/dev/null &&
- $as_echo "$as_me: WARNING: invalid host type: $ac_option" >&2
- : ${build_alias=$ac_option} ${host_alias=$ac_option} ${target_alias=$ac_option}
- ;;
-
- esac
-done
-
-if test -n "$ac_prev"; then
- ac_option=--`echo $ac_prev | sed 's/_/-/g'`
- { $as_echo "$as_me: error: missing argument to $ac_option" >&2
- { (exit 1); exit 1; }; }
-fi
-
-if test -n "$ac_unrecognized_opts"; then
- case $enable_option_checking in
- no) ;;
- fatal) { $as_echo "$as_me: error: Unrecognized options: $ac_unrecognized_opts" >&2
- { (exit 1); exit 1; }; } ;;
- *) $as_echo "$as_me: WARNING: Unrecognized options: $ac_unrecognized_opts" >&2 ;;
- esac
-fi
-
-# Check all directory arguments for consistency.
-for ac_var in exec_prefix prefix bindir sbindir libexecdir datarootdir \
- datadir sysconfdir sharedstatedir localstatedir includedir \
- oldincludedir docdir infodir htmldir dvidir pdfdir psdir \
- libdir localedir mandir
-do
- eval ac_val=\$$ac_var
- # Remove trailing slashes.
- case $ac_val in
- */ )
- ac_val=`expr "X$ac_val" : 'X\(.*[^/]\)' \| "X$ac_val" : 'X\(.*\)'`
- eval $ac_var=\$ac_val;;
- esac
- # Be sure to have absolute directory names.
- case $ac_val in
- [\\/$]* | ?:[\\/]* ) continue;;
- NONE | '' ) case $ac_var in *prefix ) continue;; esac;;
- esac
- { $as_echo "$as_me: error: expected an absolute directory name for --$ac_var: $ac_val" >&2
- { (exit 1); exit 1; }; }
-done
-
-# There might be people who depend on the old broken behavior: `$host'
-# used to hold the argument of --host etc.
-# FIXME: To remove some day.
-build=$build_alias
-host=$host_alias
-target=$target_alias
-
-# FIXME: To remove some day.
-if test "x$host_alias" != x; then
- if test "x$build_alias" = x; then
- cross_compiling=maybe
- $as_echo "$as_me: WARNING: If you wanted to set the --build type, don't use --host.
- If a cross compiler is detected then cross compile mode will be used." >&2
- elif test "x$build_alias" != "x$host_alias"; then
- cross_compiling=yes
- fi
-fi
-
-ac_tool_prefix=
-test -n "$host_alias" && ac_tool_prefix=$host_alias-
-
-test "$silent" = yes && exec 6>/dev/null
-
-
-ac_pwd=`pwd` && test -n "$ac_pwd" &&
-ac_ls_di=`ls -di .` &&
-ac_pwd_ls_di=`cd "$ac_pwd" && ls -di .` ||
- { $as_echo "$as_me: error: Working directory cannot be determined" >&2
- { (exit 1); exit 1; }; }
-test "X$ac_ls_di" = "X$ac_pwd_ls_di" ||
- { $as_echo "$as_me: error: pwd does not report name of working directory" >&2
- { (exit 1); exit 1; }; }
-
-
-# Find the source files, if location was not specified.
-if test -z "$srcdir"; then
- ac_srcdir_defaulted=yes
- # Try the directory containing this script, then the parent directory.
- ac_confdir=`$as_dirname -- "$as_myself" ||
-$as_expr X"$as_myself" : 'X\(.*[^/]\)//*[^/][^/]*/*$' \| \
- X"$as_myself" : 'X\(//\)[^/]' \| \
- X"$as_myself" : 'X\(//\)$' \| \
- X"$as_myself" : 'X\(/\)' \| . 2>/dev/null ||
-$as_echo X"$as_myself" |
- sed '/^X\(.*[^/]\)\/\/*[^/][^/]*\/*$/{
- s//\1/
- q
- }
- /^X\(\/\/\)[^/].*/{
- s//\1/
- q
- }
- /^X\(\/\/\)$/{
- s//\1/
- q
- }
- /^X\(\/\).*/{
- s//\1/
- q
- }
- s/.*/./; q'`
- srcdir=$ac_confdir
- if test ! -r "$srcdir/$ac_unique_file"; then
- srcdir=..
- fi
-else
- ac_srcdir_defaulted=no
-fi
-if test ! -r "$srcdir/$ac_unique_file"; then
- test "$ac_srcdir_defaulted" = yes && srcdir="$ac_confdir or .."
- { $as_echo "$as_me: error: cannot find sources ($ac_unique_file) in $srcdir" >&2
- { (exit 1); exit 1; }; }
-fi
-ac_msg="sources are in $srcdir, but \`cd $srcdir' does not work"
-ac_abs_confdir=`(
- cd "$srcdir" && test -r "./$ac_unique_file" || { $as_echo "$as_me: error: $ac_msg" >&2
- { (exit 1); exit 1; }; }
- pwd)`
-# When building in place, set srcdir=.
-if test "$ac_abs_confdir" = "$ac_pwd"; then
- srcdir=.
-fi
-# Remove unnecessary trailing slashes from srcdir.
-# Double slashes in file names in object file debugging info
-# mess up M-x gdb in Emacs.
-case $srcdir in
-*/) srcdir=`expr "X$srcdir" : 'X\(.*[^/]\)' \| "X$srcdir" : 'X\(.*\)'`;;
-esac
-for ac_var in $ac_precious_vars; do
- eval ac_env_${ac_var}_set=\${${ac_var}+set}
- eval ac_env_${ac_var}_value=\$${ac_var}
- eval ac_cv_env_${ac_var}_set=\${${ac_var}+set}
- eval ac_cv_env_${ac_var}_value=\$${ac_var}
-done
-
-#
-# Report the --help message.
-#
-if test "$ac_init_help" = "long"; then
- # Omit some internal or obsolete options to make the list less imposing.
- # This message is too long to be a string in the A/UX 3.1 sh.
- cat <<_ACEOF
-\`configure' configures XZ Utils 4.999.8beta to adapt to many kinds of systems.
-
-Usage: $0 [OPTION]... [VAR=VALUE]...
-
-To assign environment variables (e.g., CC, CFLAGS...), specify them as
-VAR=VALUE. See below for descriptions of some of the useful variables.
-
-Defaults for the options are specified in brackets.
-
-Configuration:
- -h, --help display this help and exit
- --help=short display options specific to this package
- --help=recursive display the short help of all the included packages
- -V, --version display version information and exit
- -q, --quiet, --silent do not print \`checking...' messages
- --cache-file=FILE cache test results in FILE [disabled]
- -C, --config-cache alias for \`--cache-file=config.cache'
- -n, --no-create do not create output files
- --srcdir=DIR find the sources in DIR [configure dir or \`..']
-
-Installation directories:
- --prefix=PREFIX install architecture-independent files in PREFIX
- [$ac_default_prefix]
- --exec-prefix=EPREFIX install architecture-dependent files in EPREFIX
- [PREFIX]
-
-By default, \`make install' will install all the files in
-\`$ac_default_prefix/bin', \`$ac_default_prefix/lib' etc. You can specify
-an installation prefix other than \`$ac_default_prefix' using \`--prefix',
-for instance \`--prefix=\$HOME'.
-
-For better control, use the options below.
-
-Fine tuning of the installation directories:
- --bindir=DIR user executables [EPREFIX/bin]
- --sbindir=DIR system admin executables [EPREFIX/sbin]
- --libexecdir=DIR program executables [EPREFIX/libexec]
- --sysconfdir=DIR read-only single-machine data [PREFIX/etc]
- --sharedstatedir=DIR modifiable architecture-independent data [PREFIX/com]
- --localstatedir=DIR modifiable single-machine data [PREFIX/var]
- --libdir=DIR object code libraries [EPREFIX/lib]
- --includedir=DIR C header files [PREFIX/include]
- --oldincludedir=DIR C header files for non-gcc [/usr/include]
- --datarootdir=DIR read-only arch.-independent data root [PREFIX/share]
- --datadir=DIR read-only architecture-independent data [DATAROOTDIR]
- --infodir=DIR info documentation [DATAROOTDIR/info]
- --localedir=DIR locale-dependent data [DATAROOTDIR/locale]
- --mandir=DIR man documentation [DATAROOTDIR/man]
- --docdir=DIR documentation root [DATAROOTDIR/doc/xz]
- --htmldir=DIR html documentation [DOCDIR]
- --dvidir=DIR dvi documentation [DOCDIR]
- --pdfdir=DIR pdf documentation [DOCDIR]
- --psdir=DIR ps documentation [DOCDIR]
-_ACEOF
-
- cat <<\_ACEOF
-
-Program names:
- --program-prefix=PREFIX prepend PREFIX to installed program names
- --program-suffix=SUFFIX append SUFFIX to installed program names
- --program-transform-name=PROGRAM run sed PROGRAM on installed program names
-
-System types:
- --build=BUILD configure for building on BUILD [guessed]
- --host=HOST cross-compile to build programs to run on HOST [BUILD]
-_ACEOF
-fi
-
-if test -n "$ac_init_help"; then
- case $ac_init_help in
- short | recursive ) echo "Configuration of XZ Utils 4.999.8beta:";;
- esac
- cat <<\_ACEOF
-
-Optional Features:
- --disable-option-checking ignore unrecognized --enable/--with options
- --disable-FEATURE do not include FEATURE (same as --enable-FEATURE=no)
- --enable-FEATURE[=ARG] include FEATURE [ARG=yes]
- --enable-debug Enable debugging code.
- --disable-encoder Do not build the encoder components.
- --disable-decoder Do not build the decoder components.
- --enable-encoders=LIST Comma-separated list of encoders to build.
- Default=all. Available encoders: lzma1 lzma2
- subblock delta x86 powerpc ia64 arm armthumb sparc
- --enable-decoders=LIST Comma-separated list of decoders to build.
- Default=all. Available decoders are the same as
- available encoders.
- --enable-match-finders=LIST
- Comma-separated list of match finders to build.
- Default=all. At least one match finder is required
- for encoding with the LZMA1 and LZMA2 filters.
- Available match finders: hc3 hc4 bt2 bt3 bt4
- --enable-checks=LIST Comma-separated list of integrity checks to build.
- Default=all. Available integrity checks: crc32 crc64
- sha256
- --disable-assembler Do not use assembler optimizations even if such
- exist for the architecture.
- --enable-unaligned-access
- Enable if the system supports *fast* unaligned
- memory access with 16-bit and 32-bit integers. By
- default, this is enabled only on x86, x86_64, and
- big endian PowerPC.
- --enable-small Make liblzma smaller and a little slower. This is
- disabled by default to optimize for speed.
- --disable-threads Disable threading support. This makes some things
- thread-unsafe.
- --disable-dependency-tracking speeds up one-time build
- --enable-dependency-tracking do not reject slow dependency extractors
- --enable-shared[=PKGS] build shared libraries [default=yes]
- --enable-static[=PKGS] build static libraries [default=yes]
- --enable-fast-install[=PKGS]
- optimize for fast installation [default=yes]
- --disable-libtool-lock avoid locking (might break parallel builds)
- --disable-nls do not use Native Language Support
- --disable-rpath do not hardcode runtime library paths
- --disable-largefile omit support for large files
- --enable-werror Enable -Werror to abort compilation on all compiler
- warnings.
-
-Optional Packages:
- --with-PACKAGE[=ARG] use PACKAGE [ARG=yes]
- --without-PACKAGE do not use PACKAGE (same as --with-PACKAGE=no)
- --with-gnu-ld assume the C compiler uses GNU ld [default=no]
- --with-pic try to use only PIC/non-PIC objects [default=use
- both]
- --with-tags[=TAGS] include additional configurations [automatic]
- --with-gnu-ld assume the C compiler uses GNU ld default=no
- --with-libiconv-prefix[=DIR] search for libiconv in DIR/include and DIR/lib
- --without-libiconv-prefix don't search for libiconv in includedir and libdir
- --with-libintl-prefix[=DIR] search for libintl in DIR/include and DIR/lib
- --without-libintl-prefix don't search for libintl in includedir and libdir
-
-Some influential environment variables:
- CC C compiler command
- CFLAGS C compiler flags
- LDFLAGS linker flags, e.g. -L<lib dir> if you have libraries in a
- nonstandard directory <lib dir>
- LIBS libraries to pass to the linker, e.g. -l<library>
- CPPFLAGS C/C++/Objective C preprocessor flags, e.g. -I<include dir> if
- you have headers in a nonstandard directory <include dir>
- CCAS assembler compiler command (defaults to CC)
- CCASFLAGS assembler compiler flags (defaults to CFLAGS)
- CPP C preprocessor
- CXX C++ compiler command
- CXXFLAGS C++ compiler flags
- CXXCPP C++ preprocessor
- F77 Fortran 77 compiler command
- FFLAGS Fortran 77 compiler flags
-
-Use these variables to override the choices made by `configure' or to help
-it to find libraries and programs with nonstandard names/locations.
-
-Report bugs to <lasse.collin@tukaani.org>.
-_ACEOF
-ac_status=$?
-fi
-
-if test "$ac_init_help" = "recursive"; then
- # If there are subdirs, report their specific --help.
- for ac_dir in : $ac_subdirs_all; do test "x$ac_dir" = x: && continue
- test -d "$ac_dir" ||
- { cd "$srcdir" && ac_pwd=`pwd` && srcdir=. && test -d "$ac_dir"; } ||
- continue
- ac_builddir=.
-
-case "$ac_dir" in
-.) ac_dir_suffix= ac_top_builddir_sub=. ac_top_build_prefix= ;;
-*)
- ac_dir_suffix=/`$as_echo "$ac_dir" | sed 's|^\.[\\/]||'`
- # A ".." for each directory in $ac_dir_suffix.
- ac_top_builddir_sub=`$as_echo "$ac_dir_suffix" | sed 's|/[^\\/]*|/..|g;s|/||'`
- case $ac_top_builddir_sub in
- "") ac_top_builddir_sub=. ac_top_build_prefix= ;;
- *) ac_top_build_prefix=$ac_top_builddir_sub/ ;;
- esac ;;
-esac
-ac_abs_top_builddir=$ac_pwd
-ac_abs_builddir=$ac_pwd$ac_dir_suffix
-# for backward compatibility:
-ac_top_builddir=$ac_top_build_prefix
-
-case $srcdir in
- .) # We are building in place.
- ac_srcdir=.
- ac_top_srcdir=$ac_top_builddir_sub
- ac_abs_top_srcdir=$ac_pwd ;;
- [\\/]* | ?:[\\/]* ) # Absolute name.
- ac_srcdir=$srcdir$ac_dir_suffix;
- ac_top_srcdir=$srcdir
- ac_abs_top_srcdir=$srcdir ;;
- *) # Relative name.
- ac_srcdir=$ac_top_build_prefix$srcdir$ac_dir_suffix
- ac_top_srcdir=$ac_top_build_prefix$srcdir
- ac_abs_top_srcdir=$ac_pwd/$srcdir ;;
-esac
-ac_abs_srcdir=$ac_abs_top_srcdir$ac_dir_suffix
-
- cd "$ac_dir" || { ac_status=$?; continue; }
- # Check for guested configure.
- if test -f "$ac_srcdir/configure.gnu"; then
- echo &&
- $SHELL "$ac_srcdir/configure.gnu" --help=recursive
- elif test -f "$ac_srcdir/configure"; then
- echo &&
- $SHELL "$ac_srcdir/configure" --help=recursive
- else
- $as_echo "$as_me: WARNING: no configuration information is in $ac_dir" >&2
- fi || ac_status=$?
- cd "$ac_pwd" || { ac_status=$?; break; }
- done
-fi
-
-test -n "$ac_init_help" && exit $ac_status
-if $ac_init_version; then
- cat <<\_ACEOF
-XZ Utils configure 4.999.8beta
-generated by GNU Autoconf 2.62
-
-Copyright (C) 1992, 1993, 1994, 1995, 1996, 1998, 1999, 2000, 2001,
-2002, 2003, 2004, 2005, 2006, 2007, 2008 Free Software Foundation, Inc.
-This configure script is free software; the Free Software Foundation
-gives unlimited permission to copy, distribute and modify it.
-_ACEOF
- exit
-fi
-cat >config.log <<_ACEOF
-This file contains any messages produced by compilers while
-running configure, to aid debugging if configure makes a mistake.
-
-It was created by XZ Utils $as_me 4.999.8beta, which was
-generated by GNU Autoconf 2.62. Invocation command line was
-
- $ $0 $@
-
-_ACEOF
-exec 5>>config.log
-{
-cat <<_ASUNAME
-## --------- ##
-## Platform. ##
-## --------- ##
-
-hostname = `(hostname || uname -n) 2>/dev/null | sed 1q`
-uname -m = `(uname -m) 2>/dev/null || echo unknown`
-uname -r = `(uname -r) 2>/dev/null || echo unknown`
-uname -s = `(uname -s) 2>/dev/null || echo unknown`
-uname -v = `(uname -v) 2>/dev/null || echo unknown`
-
-/usr/bin/uname -p = `(/usr/bin/uname -p) 2>/dev/null || echo unknown`
-/bin/uname -X = `(/bin/uname -X) 2>/dev/null || echo unknown`
-
-/bin/arch = `(/bin/arch) 2>/dev/null || echo unknown`
-/usr/bin/arch -k = `(/usr/bin/arch -k) 2>/dev/null || echo unknown`
-/usr/convex/getsysinfo = `(/usr/convex/getsysinfo) 2>/dev/null || echo unknown`
-/usr/bin/hostinfo = `(/usr/bin/hostinfo) 2>/dev/null || echo unknown`
-/bin/machine = `(/bin/machine) 2>/dev/null || echo unknown`
-/usr/bin/oslevel = `(/usr/bin/oslevel) 2>/dev/null || echo unknown`
-/bin/universe = `(/bin/universe) 2>/dev/null || echo unknown`
-
-_ASUNAME
-
-as_save_IFS=$IFS; IFS=$PATH_SEPARATOR
-for as_dir in $PATH
-do
- IFS=$as_save_IFS
- test -z "$as_dir" && as_dir=.
- $as_echo "PATH: $as_dir"
-done
-IFS=$as_save_IFS
-
-} >&5
-
-cat >&5 <<_ACEOF
-
-
-## ----------- ##
-## Core tests. ##
-## ----------- ##
-
-_ACEOF
-
-
-# Keep a trace of the command line.
-# Strip out --no-create and --no-recursion so they do not pile up.
-# Strip out --silent because we don't want to record it for future runs.
-# Also quote any args containing shell meta-characters.
-# Make two passes to allow for proper duplicate-argument suppression.
-ac_configure_args=
-ac_configure_args0=
-ac_configure_args1=
-ac_must_keep_next=false
-for ac_pass in 1 2
-do
- for ac_arg
- do
- case $ac_arg in
- -no-create | --no-c* | -n | -no-recursion | --no-r*) continue ;;
- -q | -quiet | --quiet | --quie | --qui | --qu | --q \
- | -silent | --silent | --silen | --sile | --sil)
- continue ;;
- *\'*)
- ac_arg=`$as_echo "$ac_arg" | sed "s/'/'\\\\\\\\''/g"` ;;
- esac
- case $ac_pass in
- 1) ac_configure_args0="$ac_configure_args0 '$ac_arg'" ;;
- 2)
- ac_configure_args1="$ac_configure_args1 '$ac_arg'"
- if test $ac_must_keep_next = true; then
- ac_must_keep_next=false # Got value, back to normal.
- else
- case $ac_arg in
- *=* | --config-cache | -C | -disable-* | --disable-* \
- | -enable-* | --enable-* | -gas | --g* | -nfp | --nf* \
- | -q | -quiet | --q* | -silent | --sil* | -v | -verb* \
- | -with-* | --with-* | -without-* | --without-* | --x)
- case "$ac_configure_args0 " in
- "$ac_configure_args1"*" '$ac_arg' "* ) continue ;;
- esac
- ;;
- -* ) ac_must_keep_next=true ;;
- esac
- fi
- ac_configure_args="$ac_configure_args '$ac_arg'"
- ;;
- esac
- done
-done
-$as_unset ac_configure_args0 || test "${ac_configure_args0+set}" != set || { ac_configure_args0=; export ac_configure_args0; }
-$as_unset ac_configure_args1 || test "${ac_configure_args1+set}" != set || { ac_configure_args1=; export ac_configure_args1; }
-
-# When interrupted or exit'd, cleanup temporary files, and complete
-# config.log. We remove comments because anyway the quotes in there
-# would cause problems or look ugly.
-# WARNING: Use '\'' to represent an apostrophe within the trap.
-# WARNING: Do not start the trap code with a newline, due to a FreeBSD 4.0 bug.
-trap 'exit_status=$?
- # Save into config.log some information that might help in debugging.
- {
- echo
-
- cat <<\_ASBOX
-## ---------------- ##
-## Cache variables. ##
-## ---------------- ##
-_ASBOX
- echo
- # The following way of writing the cache mishandles newlines in values,
-(
- for ac_var in `(set) 2>&1 | sed -n '\''s/^\([a-zA-Z_][a-zA-Z0-9_]*\)=.*/\1/p'\''`; do
- eval ac_val=\$$ac_var
- case $ac_val in #(
- *${as_nl}*)
- case $ac_var in #(
- *_cv_*) { $as_echo "$as_me:$LINENO: WARNING: Cache variable $ac_var contains a newline." >&5
-$as_echo "$as_me: WARNING: Cache variable $ac_var contains a newline." >&2;} ;;
- esac
- case $ac_var in #(
- _ | IFS | as_nl) ;; #(
- BASH_ARGV | BASH_SOURCE) eval $ac_var= ;; #(
- *) $as_unset $ac_var ;;
- esac ;;
- esac
- done
- (set) 2>&1 |
- case $as_nl`(ac_space='\'' '\''; set) 2>&1` in #(
- *${as_nl}ac_space=\ *)
- sed -n \
- "s/'\''/'\''\\\\'\'''\''/g;
- s/^\\([_$as_cr_alnum]*_cv_[_$as_cr_alnum]*\\)=\\(.*\\)/\\1='\''\\2'\''/p"
- ;; #(
- *)
- sed -n "/^[_$as_cr_alnum]*_cv_[_$as_cr_alnum]*=/p"
- ;;
- esac |
- sort
-)
- echo
-
- cat <<\_ASBOX
-## ----------------- ##
-## Output variables. ##
-## ----------------- ##
-_ASBOX
- echo
- for ac_var in $ac_subst_vars
- do
- eval ac_val=\$$ac_var
- case $ac_val in
- *\'\''*) ac_val=`$as_echo "$ac_val" | sed "s/'\''/'\''\\\\\\\\'\'''\''/g"`;;
- esac
- $as_echo "$ac_var='\''$ac_val'\''"
- done | sort
- echo
-
- if test -n "$ac_subst_files"; then
- cat <<\_ASBOX
-## ------------------- ##
-## File substitutions. ##
-## ------------------- ##
-_ASBOX
- echo
- for ac_var in $ac_subst_files
- do
- eval ac_val=\$$ac_var
- case $ac_val in
- *\'\''*) ac_val=`$as_echo "$ac_val" | sed "s/'\''/'\''\\\\\\\\'\'''\''/g"`;;
- esac
- $as_echo "$ac_var='\''$ac_val'\''"
- done | sort
- echo
- fi
-
- if test -s confdefs.h; then
- cat <<\_ASBOX
-## ----------- ##
-## confdefs.h. ##
-## ----------- ##
-_ASBOX
- echo
- cat confdefs.h
- echo
- fi
- test "$ac_signal" != 0 &&
- $as_echo "$as_me: caught signal $ac_signal"
- $as_echo "$as_me: exit $exit_status"
- } >&5
- rm -f core *.core core.conftest.* &&
- rm -f -r conftest* confdefs* conf$$* $ac_clean_files &&
- exit $exit_status
-' 0
-for ac_signal in 1 2 13 15; do
- trap 'ac_signal='$ac_signal'; { (exit 1); exit 1; }' $ac_signal
-done
-ac_signal=0
-
-# confdefs.h avoids OS command line length limits that DEFS can exceed.
-rm -f -r conftest* confdefs.h
-
-# Predefined preprocessor variables.
-
-cat >>confdefs.h <<_ACEOF
-#define PACKAGE_NAME "$PACKAGE_NAME"
-_ACEOF
-
-
-cat >>confdefs.h <<_ACEOF
-#define PACKAGE_TARNAME "$PACKAGE_TARNAME"
-_ACEOF
-
-
-cat >>confdefs.h <<_ACEOF
-#define PACKAGE_VERSION "$PACKAGE_VERSION"
-_ACEOF
-
-
-cat >>confdefs.h <<_ACEOF
-#define PACKAGE_STRING "$PACKAGE_STRING"
-_ACEOF
-
-
-cat >>confdefs.h <<_ACEOF
-#define PACKAGE_BUGREPORT "$PACKAGE_BUGREPORT"
-_ACEOF
-
-
-# Let the site file select an alternate cache file if it wants to.
-# Prefer an explicitly selected file to automatically selected ones.
-ac_site_file1=NONE
-ac_site_file2=NONE
-if test -n "$CONFIG_SITE"; then
- ac_site_file1=$CONFIG_SITE
-elif test "x$prefix" != xNONE; then
- ac_site_file1=$prefix/share/config.site
- ac_site_file2=$prefix/etc/config.site
-else
- ac_site_file1=$ac_default_prefix/share/config.site
- ac_site_file2=$ac_default_prefix/etc/config.site
-fi
-for ac_site_file in "$ac_site_file1" "$ac_site_file2"
-do
- test "x$ac_site_file" = xNONE && continue
- if test -r "$ac_site_file"; then
- { $as_echo "$as_me:$LINENO: loading site script $ac_site_file" >&5
-$as_echo "$as_me: loading site script $ac_site_file" >&6;}
- sed 's/^/| /' "$ac_site_file" >&5
- . "$ac_site_file"
- fi
-done
-
-if test -r "$cache_file"; then
- # Some versions of bash will fail to source /dev/null (special
- # files actually), so we avoid doing that.
- if test -f "$cache_file"; then
- { $as_echo "$as_me:$LINENO: loading cache $cache_file" >&5
-$as_echo "$as_me: loading cache $cache_file" >&6;}
- case $cache_file in
- [\\/]* | ?:[\\/]* ) . "$cache_file";;
- *) . "./$cache_file";;
- esac
- fi
-else
- { $as_echo "$as_me:$LINENO: creating cache $cache_file" >&5
-$as_echo "$as_me: creating cache $cache_file" >&6;}
- >$cache_file
-fi
-
-gt_needs="$gt_needs "
-# Check that the precious variables saved in the cache have kept the same
-# value.
-ac_cache_corrupted=false
-for ac_var in $ac_precious_vars; do
- eval ac_old_set=\$ac_cv_env_${ac_var}_set
- eval ac_new_set=\$ac_env_${ac_var}_set
- eval ac_old_val=\$ac_cv_env_${ac_var}_value
- eval ac_new_val=\$ac_env_${ac_var}_value
- case $ac_old_set,$ac_new_set in
- set,)
- { $as_echo "$as_me:$LINENO: error: \`$ac_var' was set to \`$ac_old_val' in the previous run" >&5
-$as_echo "$as_me: error: \`$ac_var' was set to \`$ac_old_val' in the previous run" >&2;}
- ac_cache_corrupted=: ;;
- ,set)
- { $as_echo "$as_me:$LINENO: error: \`$ac_var' was not set in the previous run" >&5
-$as_echo "$as_me: error: \`$ac_var' was not set in the previous run" >&2;}
- ac_cache_corrupted=: ;;
- ,);;
- *)
- if test "x$ac_old_val" != "x$ac_new_val"; then
- # differences in whitespace do not lead to failure.
- ac_old_val_w=`echo x $ac_old_val`
- ac_new_val_w=`echo x $ac_new_val`
- if test "$ac_old_val_w" != "$ac_new_val_w"; then
- { $as_echo "$as_me:$LINENO: error: \`$ac_var' has changed since the previous run:" >&5
-$as_echo "$as_me: error: \`$ac_var' has changed since the previous run:" >&2;}
- ac_cache_corrupted=:
- else
- { $as_echo "$as_me:$LINENO: warning: ignoring whitespace changes in \`$ac_var' since the previous run:" >&5
-$as_echo "$as_me: warning: ignoring whitespace changes in \`$ac_var' since the previous run:" >&2;}
- eval $ac_var=\$ac_old_val
- fi
- { $as_echo "$as_me:$LINENO: former value: \`$ac_old_val'" >&5
-$as_echo "$as_me: former value: \`$ac_old_val'" >&2;}
- { $as_echo "$as_me:$LINENO: current value: \`$ac_new_val'" >&5
-$as_echo "$as_me: current value: \`$ac_new_val'" >&2;}
- fi;;
- esac
- # Pass precious variables to config.status.
- if test "$ac_new_set" = set; then
- case $ac_new_val in
- *\'*) ac_arg=$ac_var=`$as_echo "$ac_new_val" | sed "s/'/'\\\\\\\\''/g"` ;;
- *) ac_arg=$ac_var=$ac_new_val ;;
- esac
- case " $ac_configure_args " in
- *" '$ac_arg' "*) ;; # Avoid dups. Use of quotes ensures accuracy.
- *) ac_configure_args="$ac_configure_args '$ac_arg'" ;;
- esac
- fi
-done
-if $ac_cache_corrupted; then
- { $as_echo "$as_me:$LINENO: error: changes in the environment can compromise the build" >&5
-$as_echo "$as_me: error: changes in the environment can compromise the build" >&2;}
- { { $as_echo "$as_me:$LINENO: error: run \`make distclean' and/or \`rm $cache_file' and start over" >&5
-$as_echo "$as_me: error: run \`make distclean' and/or \`rm $cache_file' and start over" >&2;}
- { (exit 1); exit 1; }; }
-fi
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-ac_ext=c
-ac_cpp='$CPP $CPPFLAGS'
-ac_compile='$CC -c $CFLAGS $CPPFLAGS conftest.$ac_ext >&5'
-ac_link='$CC -o conftest$ac_exeext $CFLAGS $CPPFLAGS $LDFLAGS conftest.$ac_ext $LIBS >&5'
-ac_compiler_gnu=$ac_cv_c_compiler_gnu
-
-
-
-ac_config_headers="$ac_config_headers config.h"
-
-
-echo
-echo "$PACKAGE_STRING"
-
-echo
-echo "System type:"
-# This is needed to know if assembler optimizations can be used.
-ac_aux_dir=
-for ac_dir in "$srcdir" "$srcdir/.." "$srcdir/../.."; do
- if test -f "$ac_dir/install-sh"; then
- ac_aux_dir=$ac_dir
- ac_install_sh="$ac_aux_dir/install-sh -c"
- break
- elif test -f "$ac_dir/install.sh"; then
- ac_aux_dir=$ac_dir
- ac_install_sh="$ac_aux_dir/install.sh -c"
- break
- elif test -f "$ac_dir/shtool"; then
- ac_aux_dir=$ac_dir
- ac_install_sh="$ac_aux_dir/shtool install -c"
- break
- fi
-done
-if test -z "$ac_aux_dir"; then
- { { $as_echo "$as_me:$LINENO: error: cannot find install-sh or install.sh in \"$srcdir\" \"$srcdir/..\" \"$srcdir/../..\"" >&5
-$as_echo "$as_me: error: cannot find install-sh or install.sh in \"$srcdir\" \"$srcdir/..\" \"$srcdir/../..\"" >&2;}
- { (exit 1); exit 1; }; }
-fi
-
-# These three variables are undocumented and unsupported,
-# and are intended to be withdrawn in a future Autoconf release.
-# They can cause serious problems if a builder's source tree is in a directory
-# whose full name contains unusual characters.
-ac_config_guess="$SHELL $ac_aux_dir/config.guess" # Please don't use this var.
-ac_config_sub="$SHELL $ac_aux_dir/config.sub" # Please don't use this var.
-ac_configure="$SHELL $ac_aux_dir/configure" # Please don't use this var.
-
-
-# Make sure we can run config.sub.
-$SHELL "$ac_aux_dir/config.sub" sun4 >/dev/null 2>&1 ||
- { { $as_echo "$as_me:$LINENO: error: cannot run $SHELL $ac_aux_dir/config.sub" >&5
-$as_echo "$as_me: error: cannot run $SHELL $ac_aux_dir/config.sub" >&2;}
- { (exit 1); exit 1; }; }
-
-{ $as_echo "$as_me:$LINENO: checking build system type" >&5
-$as_echo_n "checking build system type... " >&6; }
-if test "${ac_cv_build+set}" = set; then
- $as_echo_n "(cached) " >&6
-else
- ac_build_alias=$build_alias
-test "x$ac_build_alias" = x &&
- ac_build_alias=`$SHELL "$ac_aux_dir/config.guess"`
-test "x$ac_build_alias" = x &&
- { { $as_echo "$as_me:$LINENO: error: cannot guess build type; you must specify one" >&5
-$as_echo "$as_me: error: cannot guess build type; you must specify one" >&2;}
- { (exit 1); exit 1; }; }
-ac_cv_build=`$SHELL "$ac_aux_dir/config.sub" $ac_build_alias` ||
- { { $as_echo "$as_me:$LINENO: error: $SHELL $ac_aux_dir/config.sub $ac_build_alias failed" >&5
-$as_echo "$as_me: error: $SHELL $ac_aux_dir/config.sub $ac_build_alias failed" >&2;}
- { (exit 1); exit 1; }; }
-
-fi
-{ $as_echo "$as_me:$LINENO: result: $ac_cv_build" >&5
-$as_echo "$ac_cv_build" >&6; }
-case $ac_cv_build in
-*-*-*) ;;
-*) { { $as_echo "$as_me:$LINENO: error: invalid value of canonical build" >&5
-$as_echo "$as_me: error: invalid value of canonical build" >&2;}
- { (exit 1); exit 1; }; };;
-esac
-build=$ac_cv_build
-ac_save_IFS=$IFS; IFS='-'
-set x $ac_cv_build
-shift
-build_cpu=$1
-build_vendor=$2
-shift; shift
-# Remember, the first character of IFS is used to create $*,
-# except with old shells:
-build_os=$*
-IFS=$ac_save_IFS
-case $build_os in *\ *) build_os=`echo "$build_os" | sed 's/ /-/g'`;; esac
-
-
-{ $as_echo "$as_me:$LINENO: checking host system type" >&5
-$as_echo_n "checking host system type... " >&6; }
-if test "${ac_cv_host+set}" = set; then
- $as_echo_n "(cached) " >&6
-else
- if test "x$host_alias" = x; then
- ac_cv_host=$ac_cv_build
-else
- ac_cv_host=`$SHELL "$ac_aux_dir/config.sub" $host_alias` ||
- { { $as_echo "$as_me:$LINENO: error: $SHELL $ac_aux_dir/config.sub $host_alias failed" >&5
-$as_echo "$as_me: error: $SHELL $ac_aux_dir/config.sub $host_alias failed" >&2;}
- { (exit 1); exit 1; }; }
-fi
-
-fi
-{ $as_echo "$as_me:$LINENO: result: $ac_cv_host" >&5
-$as_echo "$ac_cv_host" >&6; }
-case $ac_cv_host in
-*-*-*) ;;
-*) { { $as_echo "$as_me:$LINENO: error: invalid value of canonical host" >&5
-$as_echo "$as_me: error: invalid value of canonical host" >&2;}
- { (exit 1); exit 1; }; };;
-esac
-host=$ac_cv_host
-ac_save_IFS=$IFS; IFS='-'
-set x $ac_cv_host
-shift
-host_cpu=$1
-host_vendor=$2
-shift; shift
-# Remember, the first character of IFS is used to create $*,
-# except with old shells:
-host_os=$*
-IFS=$ac_save_IFS
-case $host_os in *\ *) host_os=`echo "$host_os" | sed 's/ /-/g'`;; esac
-
-
-
-
-echo
-echo "Configure options:"
-
-
-#############
-# Debugging #
-#############
-
-{ $as_echo "$as_me:$LINENO: checking if debugging code should be compiled" >&5
-$as_echo_n "checking if debugging code should be compiled... " >&6; }
-# Check whether --enable-debug was given.
-if test "${enable_debug+set}" = set; then
- enableval=$enable_debug;
-else
- enable_debug=no
-fi
-
-if test "x$enable_debug" = xyes; then
- { $as_echo "$as_me:$LINENO: result: yes" >&5
-$as_echo "yes" >&6; }
-else
-
-cat >>confdefs.h <<\_ACEOF
-#define NDEBUG 1
-_ACEOF
-
- { $as_echo "$as_me:$LINENO: result: no" >&5
-$as_echo "no" >&6; }
-fi
-
-
-###########
-# Encoder #
-###########
-
-{ $as_echo "$as_me:$LINENO: checking if encoder components should be built" >&5
-$as_echo_n "checking if encoder components should be built... " >&6; }
-# Check whether --enable-encoder was given.
-if test "${enable_encoder+set}" = set; then
- enableval=$enable_encoder;
-else
- enable_encoder=yes
-fi
-
-if test "x$enable_encoder" = xyes; then
-
-cat >>confdefs.h <<\_ACEOF
-#define HAVE_ENCODER 1
-_ACEOF
-
- { $as_echo "$as_me:$LINENO: result: yes" >&5
-$as_echo "yes" >&6; }
-else
- { $as_echo "$as_me:$LINENO: result: no" >&5
-$as_echo "no" >&6; }
-fi
- if test "x$enable_encoder" = xyes; then
- COND_MAIN_ENCODER_TRUE=
- COND_MAIN_ENCODER_FALSE='#'
-else
- COND_MAIN_ENCODER_TRUE='#'
- COND_MAIN_ENCODER_FALSE=
-fi
-
-
-
-###########
-# Decoder #
-###########
-
-{ $as_echo "$as_me:$LINENO: checking if decoder components should be built" >&5
-$as_echo_n "checking if decoder components should be built... " >&6; }
-# Check whether --enable-decoder was given.
-if test "${enable_decoder+set}" = set; then
- enableval=$enable_decoder;
-else
- enable_decoder=yes
-fi
-
-if test "x$enable_decoder" = xyes; then
-
-cat >>confdefs.h <<\_ACEOF
-#define HAVE_DECODER 1
-_ACEOF
-
- { $as_echo "$as_me:$LINENO: result: yes" >&5
-$as_echo "yes" >&6; }
-else
- { $as_echo "$as_me:$LINENO: result: no" >&5
-$as_echo "no" >&6; }
- if test "x$enable_encoder" = xno; then
- { { $as_echo "$as_me:$LINENO: error: Do not disable both encoder and decoder." >&5
-$as_echo "$as_me: error: Do not disable both encoder and decoder." >&2;}
- { (exit 1); exit 1; }; }
- fi
-fi
- if test "x$enable_decoder" = xyes; then
- COND_MAIN_DECODER_TRUE=
- COND_MAIN_DECODER_FALSE='#'
-else
- COND_MAIN_DECODER_TRUE='#'
- COND_MAIN_DECODER_FALSE=
-fi
-
-
-
-###########
-# Filters #
-###########
-
-
-
-
-enable_filter_lzma1=no
-enable_encoder_lzma1=no
-enable_decoder_lzma1=no
-enable_filter_lzma2=no
-enable_encoder_lzma2=no
-enable_decoder_lzma2=no
-enable_filter_subblock=no
-enable_encoder_subblock=no
-enable_decoder_subblock=no
-enable_filter_delta=no
-enable_encoder_delta=no
-enable_decoder_delta=no
-enable_filter_x86=no
-enable_encoder_x86=no
-enable_decoder_x86=no
-enable_filter_powerpc=no
-enable_encoder_powerpc=no
-enable_decoder_powerpc=no
-enable_filter_ia64=no
-enable_encoder_ia64=no
-enable_decoder_ia64=no
-enable_filter_arm=no
-enable_encoder_arm=no
-enable_decoder_arm=no
-enable_filter_armthumb=no
-enable_encoder_armthumb=no
-enable_decoder_armthumb=no
-enable_filter_sparc=no
-enable_encoder_sparc=no
-enable_decoder_sparc=no
-
-{ $as_echo "$as_me:$LINENO: checking which encoders to build" >&5
-$as_echo_n "checking which encoders to build... " >&6; }
-# Check whether --enable-encoders was given.
-if test "${enable_encoders+set}" = set; then
- enableval=$enable_encoders;
-else
- enable_encoders=lzma1,lzma2,subblock,delta,x86,powerpc,ia64,arm,armthumb,sparc
-fi
-
-enable_encoders=`echo "$enable_encoders" | sed 's/,subblock//; s/,/ /g'`
-if test "x$enable_encoders" = xno || test "x$enable_encoders" = x; then
- { $as_echo "$as_me:$LINENO: result: (none)" >&5
-$as_echo "(none)" >&6; }
-else
- for arg in $enable_encoders
- do
- case $arg in
- lzma1)
- enable_filter_lzma1=yes
- enable_encoder_lzma1=yes
-
-cat >>confdefs.h <<\_ACEOF
-#define HAVE_ENCODER_LZMA1 1
-_ACEOF
-
- ;;
- lzma2)
- enable_filter_lzma2=yes
- enable_encoder_lzma2=yes
-
-cat >>confdefs.h <<\_ACEOF
-#define HAVE_ENCODER_LZMA2 1
-_ACEOF
-
- ;;
- subblock)
- enable_filter_subblock=yes
- enable_encoder_subblock=yes
-
-cat >>confdefs.h <<\_ACEOF
-#define HAVE_ENCODER_SUBBLOCK 1
-_ACEOF
-
- ;;
- delta)
- enable_filter_delta=yes
- enable_encoder_delta=yes
-
-cat >>confdefs.h <<\_ACEOF
-#define HAVE_ENCODER_DELTA 1
-_ACEOF
-
- ;;
- x86)
- enable_filter_x86=yes
- enable_encoder_x86=yes
-
-cat >>confdefs.h <<\_ACEOF
-#define HAVE_ENCODER_X86 1
-_ACEOF
-
- ;;
- powerpc)
- enable_filter_powerpc=yes
- enable_encoder_powerpc=yes
-
-cat >>confdefs.h <<\_ACEOF
-#define HAVE_ENCODER_POWERPC 1
-_ACEOF
-
- ;;
- ia64)
- enable_filter_ia64=yes
- enable_encoder_ia64=yes
-
-cat >>confdefs.h <<\_ACEOF
-#define HAVE_ENCODER_IA64 1
-_ACEOF
-
- ;;
- arm)
- enable_filter_arm=yes
- enable_encoder_arm=yes
-
-cat >>confdefs.h <<\_ACEOF
-#define HAVE_ENCODER_ARM 1
-_ACEOF
-
- ;;
- armthumb)
- enable_filter_armthumb=yes
- enable_encoder_armthumb=yes
-
-cat >>confdefs.h <<\_ACEOF
-#define HAVE_ENCODER_ARMTHUMB 1
-_ACEOF
-
- ;;
- sparc)
- enable_filter_sparc=yes
- enable_encoder_sparc=yes
-
-cat >>confdefs.h <<\_ACEOF
-#define HAVE_ENCODER_SPARC 1
-_ACEOF
-
- ;;
- *)
- { $as_echo "$as_me:$LINENO: result: " >&5
-$as_echo "" >&6; }
- { { $as_echo "$as_me:$LINENO: error: unknown filter: $arg" >&5
-$as_echo "$as_me: error: unknown filter: $arg" >&2;}
- { (exit 1); exit 1; }; }
- ;;
- esac
- done
- { $as_echo "$as_me:$LINENO: result: $enable_encoders" >&5
-$as_echo "$enable_encoders" >&6; }
-fi
-
-{ $as_echo "$as_me:$LINENO: checking which decoders to build" >&5
-$as_echo_n "checking which decoders to build... " >&6; }
-# Check whether --enable-decoders was given.
-if test "${enable_decoders+set}" = set; then
- enableval=$enable_decoders;
-else
- enable_decoders=lzma1,lzma2,subblock,delta,x86,powerpc,ia64,arm,armthumb,sparc
-fi
-
-enable_decoders=`echo "$enable_decoders" | sed 's/,subblock//; s/,/ /g'`
-if test "x$enable_decoders" = xno || test "x$enable_decoders" = x; then
- { $as_echo "$as_me:$LINENO: result: (none)" >&5
-$as_echo "(none)" >&6; }
-else
- for arg in $enable_decoders
- do
- case $arg in
- lzma1)
- enable_filter_lzma1=yes
- enable_decoder_lzma1=yes
-
-cat >>confdefs.h <<\_ACEOF
-#define HAVE_DECODER_LZMA1 1
-_ACEOF
-
- ;;
- lzma2)
- enable_filter_lzma2=yes
- enable_decoder_lzma2=yes
-
-cat >>confdefs.h <<\_ACEOF
-#define HAVE_DECODER_LZMA2 1
-_ACEOF
-
- ;;
- subblock)
- enable_filter_subblock=yes
- enable_decoder_subblock=yes
-
-cat >>confdefs.h <<\_ACEOF
-#define HAVE_DECODER_SUBBLOCK 1
-_ACEOF
-
- ;;
- delta)
- enable_filter_delta=yes
- enable_decoder_delta=yes
-
-cat >>confdefs.h <<\_ACEOF
-#define HAVE_DECODER_DELTA 1
-_ACEOF
-
- ;;
- x86)
- enable_filter_x86=yes
- enable_decoder_x86=yes
-
-cat >>confdefs.h <<\_ACEOF
-#define HAVE_DECODER_X86 1
-_ACEOF
-
- ;;
- powerpc)
- enable_filter_powerpc=yes
- enable_decoder_powerpc=yes
-
-cat >>confdefs.h <<\_ACEOF
-#define HAVE_DECODER_POWERPC 1
-_ACEOF
-
- ;;
- ia64)
- enable_filter_ia64=yes
- enable_decoder_ia64=yes
-
-cat >>confdefs.h <<\_ACEOF
-#define HAVE_DECODER_IA64 1
-_ACEOF
-
- ;;
- arm)
- enable_filter_arm=yes
- enable_decoder_arm=yes
-
-cat >>confdefs.h <<\_ACEOF
-#define HAVE_DECODER_ARM 1
-_ACEOF
-
- ;;
- armthumb)
- enable_filter_armthumb=yes
- enable_decoder_armthumb=yes
-
-cat >>confdefs.h <<\_ACEOF
-#define HAVE_DECODER_ARMTHUMB 1
-_ACEOF
-
- ;;
- sparc)
- enable_filter_sparc=yes
- enable_decoder_sparc=yes
-
-cat >>confdefs.h <<\_ACEOF
-#define HAVE_DECODER_SPARC 1
-_ACEOF
-
- ;;
- *)
- { $as_echo "$as_me:$LINENO: result: " >&5
-$as_echo "" >&6; }
- { { $as_echo "$as_me:$LINENO: error: unknown filter: $arg" >&5
-$as_echo "$as_me: error: unknown filter: $arg" >&2;}
- { (exit 1); exit 1; }; }
- ;;
- esac
- done
-
- # LZMA2 requires that LZMA1 is enabled.
- test "x$enable_encoder_lzma2" = xyes && enable_encoder_lzma1=yes
- test "x$enable_decoder_lzma2" = xyes && enable_decoder_lzma1=yes
-
- { $as_echo "$as_me:$LINENO: result: $enable_decoders" >&5
-$as_echo "$enable_decoders" >&6; }
-fi
-
-if test "x$enable_encoder_lzma2$enable_encoder_lzma1" = xyesno \
- || test "x$enable_decoder_lzma2$enable_decoder_lzma1" = xyesno; then
- { { $as_echo "$as_me:$LINENO: error: LZMA2 requires that LZMA1 is also enabled." >&5
-$as_echo "$as_me: error: LZMA2 requires that LZMA1 is also enabled." >&2;}
- { (exit 1); exit 1; }; }
-fi
-
- if test "x$enable_filter_lzma1" = xyes; then
- COND_FILTER_LZMA1_TRUE=
- COND_FILTER_LZMA1_FALSE='#'
-else
- COND_FILTER_LZMA1_TRUE='#'
- COND_FILTER_LZMA1_FALSE=
-fi
-
- if test "x$enable_encoder_lzma1" = xyes; then
- COND_ENCODER_LZMA1_TRUE=
- COND_ENCODER_LZMA1_FALSE='#'
-else
- COND_ENCODER_LZMA1_TRUE='#'
- COND_ENCODER_LZMA1_FALSE=
-fi
-
- if test "x$enable_decoder_lzma1" = xyes; then
- COND_DECODER_LZMA1_TRUE=
- COND_DECODER_LZMA1_FALSE='#'
-else
- COND_DECODER_LZMA1_TRUE='#'
- COND_DECODER_LZMA1_FALSE=
-fi
-
- if test "x$enable_filter_lzma2" = xyes; then
- COND_FILTER_LZMA2_TRUE=
- COND_FILTER_LZMA2_FALSE='#'
-else
- COND_FILTER_LZMA2_TRUE='#'
- COND_FILTER_LZMA2_FALSE=
-fi
-
- if test "x$enable_encoder_lzma2" = xyes; then
- COND_ENCODER_LZMA2_TRUE=
- COND_ENCODER_LZMA2_FALSE='#'
-else
- COND_ENCODER_LZMA2_TRUE='#'
- COND_ENCODER_LZMA2_FALSE=
-fi
-
- if test "x$enable_decoder_lzma2" = xyes; then
- COND_DECODER_LZMA2_TRUE=
- COND_DECODER_LZMA2_FALSE='#'
-else
- COND_DECODER_LZMA2_TRUE='#'
- COND_DECODER_LZMA2_FALSE=
-fi
-
- if test "x$enable_filter_subblock" = xyes; then
- COND_FILTER_SUBBLOCK_TRUE=
- COND_FILTER_SUBBLOCK_FALSE='#'
-else
- COND_FILTER_SUBBLOCK_TRUE='#'
- COND_FILTER_SUBBLOCK_FALSE=
-fi
-
- if test "x$enable_encoder_subblock" = xyes; then
- COND_ENCODER_SUBBLOCK_TRUE=
- COND_ENCODER_SUBBLOCK_FALSE='#'
-else
- COND_ENCODER_SUBBLOCK_TRUE='#'
- COND_ENCODER_SUBBLOCK_FALSE=
-fi
-
- if test "x$enable_decoder_subblock" = xyes; then
- COND_DECODER_SUBBLOCK_TRUE=
- COND_DECODER_SUBBLOCK_FALSE='#'
-else
- COND_DECODER_SUBBLOCK_TRUE='#'
- COND_DECODER_SUBBLOCK_FALSE=
-fi
-
- if test "x$enable_filter_delta" = xyes; then
- COND_FILTER_DELTA_TRUE=
- COND_FILTER_DELTA_FALSE='#'
-else
- COND_FILTER_DELTA_TRUE='#'
- COND_FILTER_DELTA_FALSE=
-fi
-
- if test "x$enable_encoder_delta" = xyes; then
- COND_ENCODER_DELTA_TRUE=
- COND_ENCODER_DELTA_FALSE='#'
-else
- COND_ENCODER_DELTA_TRUE='#'
- COND_ENCODER_DELTA_FALSE=
-fi
-
- if test "x$enable_decoder_delta" = xyes; then
- COND_DECODER_DELTA_TRUE=
- COND_DECODER_DELTA_FALSE='#'
-else
- COND_DECODER_DELTA_TRUE='#'
- COND_DECODER_DELTA_FALSE=
-fi
-
- if test "x$enable_filter_x86" = xyes; then
- COND_FILTER_X86_TRUE=
- COND_FILTER_X86_FALSE='#'
-else
- COND_FILTER_X86_TRUE='#'
- COND_FILTER_X86_FALSE=
-fi
-
- if test "x$enable_encoder_x86" = xyes; then
- COND_ENCODER_X86_TRUE=
- COND_ENCODER_X86_FALSE='#'
-else
- COND_ENCODER_X86_TRUE='#'
- COND_ENCODER_X86_FALSE=
-fi
-
- if test "x$enable_decoder_x86" = xyes; then
- COND_DECODER_X86_TRUE=
- COND_DECODER_X86_FALSE='#'
-else
- COND_DECODER_X86_TRUE='#'
- COND_DECODER_X86_FALSE=
-fi
-
- if test "x$enable_filter_powerpc" = xyes; then
- COND_FILTER_POWERPC_TRUE=
- COND_FILTER_POWERPC_FALSE='#'
-else
- COND_FILTER_POWERPC_TRUE='#'
- COND_FILTER_POWERPC_FALSE=
-fi
-
- if test "x$enable_encoder_powerpc" = xyes; then
- COND_ENCODER_POWERPC_TRUE=
- COND_ENCODER_POWERPC_FALSE='#'
-else
- COND_ENCODER_POWERPC_TRUE='#'
- COND_ENCODER_POWERPC_FALSE=
-fi
-
- if test "x$enable_decoder_powerpc" = xyes; then
- COND_DECODER_POWERPC_TRUE=
- COND_DECODER_POWERPC_FALSE='#'
-else
- COND_DECODER_POWERPC_TRUE='#'
- COND_DECODER_POWERPC_FALSE=
-fi
-
- if test "x$enable_filter_ia64" = xyes; then
- COND_FILTER_IA64_TRUE=
- COND_FILTER_IA64_FALSE='#'
-else
- COND_FILTER_IA64_TRUE='#'
- COND_FILTER_IA64_FALSE=
-fi
-
- if test "x$enable_encoder_ia64" = xyes; then
- COND_ENCODER_IA64_TRUE=
- COND_ENCODER_IA64_FALSE='#'
-else
- COND_ENCODER_IA64_TRUE='#'
- COND_ENCODER_IA64_FALSE=
-fi
-
- if test "x$enable_decoder_ia64" = xyes; then
- COND_DECODER_IA64_TRUE=
- COND_DECODER_IA64_FALSE='#'
-else
- COND_DECODER_IA64_TRUE='#'
- COND_DECODER_IA64_FALSE=
-fi
-
- if test "x$enable_filter_arm" = xyes; then
- COND_FILTER_ARM_TRUE=
- COND_FILTER_ARM_FALSE='#'
-else
- COND_FILTER_ARM_TRUE='#'
- COND_FILTER_ARM_FALSE=
-fi
-
- if test "x$enable_encoder_arm" = xyes; then
- COND_ENCODER_ARM_TRUE=
- COND_ENCODER_ARM_FALSE='#'
-else
- COND_ENCODER_ARM_TRUE='#'
- COND_ENCODER_ARM_FALSE=
-fi
-
- if test "x$enable_decoder_arm" = xyes; then
- COND_DECODER_ARM_TRUE=
- COND_DECODER_ARM_FALSE='#'
-else
- COND_DECODER_ARM_TRUE='#'
- COND_DECODER_ARM_FALSE=
-fi
-
- if test "x$enable_filter_armthumb" = xyes; then
- COND_FILTER_ARMTHUMB_TRUE=
- COND_FILTER_ARMTHUMB_FALSE='#'
-else
- COND_FILTER_ARMTHUMB_TRUE='#'
- COND_FILTER_ARMTHUMB_FALSE=
-fi
-
- if test "x$enable_encoder_armthumb" = xyes; then
- COND_ENCODER_ARMTHUMB_TRUE=
- COND_ENCODER_ARMTHUMB_FALSE='#'
-else
- COND_ENCODER_ARMTHUMB_TRUE='#'
- COND_ENCODER_ARMTHUMB_FALSE=
-fi
-
- if test "x$enable_decoder_armthumb" = xyes; then
- COND_DECODER_ARMTHUMB_TRUE=
- COND_DECODER_ARMTHUMB_FALSE='#'
-else
- COND_DECODER_ARMTHUMB_TRUE='#'
- COND_DECODER_ARMTHUMB_FALSE=
-fi
-
- if test "x$enable_filter_sparc" = xyes; then
- COND_FILTER_SPARC_TRUE=
- COND_FILTER_SPARC_FALSE='#'
-else
- COND_FILTER_SPARC_TRUE='#'
- COND_FILTER_SPARC_FALSE=
-fi
-
- if test "x$enable_encoder_sparc" = xyes; then
- COND_ENCODER_SPARC_TRUE=
- COND_ENCODER_SPARC_FALSE='#'
-else
- COND_ENCODER_SPARC_TRUE='#'
- COND_ENCODER_SPARC_FALSE=
-fi
-
- if test "x$enable_decoder_sparc" = xyes; then
- COND_DECODER_SPARC_TRUE=
- COND_DECODER_SPARC_FALSE='#'
-else
- COND_DECODER_SPARC_TRUE='#'
- COND_DECODER_SPARC_FALSE=
-fi
-
-
-# The so called "simple filters" share common code.
-enable_filter_simple=no
-enable_encoder_simple=no
-enable_decoder_simple=no
-test "x$enable_filter_x86" = xyes && enable_filter_simple=yes
-test "x$enable_encoder_x86" = xyes && enable_encoder_simple=yes
-test "x$enable_decoder_x86" = xyes && enable_decoder_simple=yes
-test "x$enable_filter_powerpc" = xyes && enable_filter_simple=yes
-test "x$enable_encoder_powerpc" = xyes && enable_encoder_simple=yes
-test "x$enable_decoder_powerpc" = xyes && enable_decoder_simple=yes
-test "x$enable_filter_ia64" = xyes && enable_filter_simple=yes
-test "x$enable_encoder_ia64" = xyes && enable_encoder_simple=yes
-test "x$enable_decoder_ia64" = xyes && enable_decoder_simple=yes
-test "x$enable_filter_arm" = xyes && enable_filter_simple=yes
-test "x$enable_encoder_arm" = xyes && enable_encoder_simple=yes
-test "x$enable_decoder_arm" = xyes && enable_decoder_simple=yes
-test "x$enable_filter_armthumb" = xyes && enable_filter_simple=yes
-test "x$enable_encoder_armthumb" = xyes && enable_encoder_simple=yes
-test "x$enable_decoder_armthumb" = xyes && enable_decoder_simple=yes
-test "x$enable_filter_sparc" = xyes && enable_filter_simple=yes
-test "x$enable_encoder_sparc" = xyes && enable_encoder_simple=yes
-test "x$enable_decoder_sparc" = xyes && enable_decoder_simple=yes
- if test "x$enable_filter_simple" = xyes; then
- COND_FILTER_SIMPLE_TRUE=
- COND_FILTER_SIMPLE_FALSE='#'
-else
- COND_FILTER_SIMPLE_TRUE='#'
- COND_FILTER_SIMPLE_FALSE=
-fi
-
- if test "x$enable_encoder_simple" = xyes; then
- COND_ENCODER_SIMPLE_TRUE=
- COND_ENCODER_SIMPLE_FALSE='#'
-else
- COND_ENCODER_SIMPLE_TRUE='#'
- COND_ENCODER_SIMPLE_FALSE=
-fi
-
- if test "x$enable_decoder_simple" = xyes; then
- COND_DECODER_SIMPLE_TRUE=
- COND_DECODER_SIMPLE_FALSE='#'
-else
- COND_DECODER_SIMPLE_TRUE='#'
- COND_DECODER_SIMPLE_FALSE=
-fi
-
-
-# LZ-based filters share common code.
-enable_filter_lz=no
-enable_encoder_lz=no
-enable_decoder_lz=no
-test "x$enable_filter_lzma1" = xyes && enable_filter_lz=yes
-test "x$enable_encoder_lzma1" = xyes && enable_encoder_lz=yes
-test "x$enable_decoder_lzma1" = xyes && enable_decoder_lz=yes
-test "x$enable_filter_lzma2" = xyes && enable_filter_lz=yes
-test "x$enable_encoder_lzma2" = xyes && enable_encoder_lz=yes
-test "x$enable_decoder_lzma2" = xyes && enable_decoder_lz=yes
- if test "x$enable_filter_lz" = xyes; then
- COND_FILTER_LZ_TRUE=
- COND_FILTER_LZ_FALSE='#'
-else
- COND_FILTER_LZ_TRUE='#'
- COND_FILTER_LZ_FALSE=
-fi
-
- if test "x$enable_encoder_lz" = xyes; then
- COND_ENCODER_LZ_TRUE=
- COND_ENCODER_LZ_FALSE='#'
-else
- COND_ENCODER_LZ_TRUE='#'
- COND_ENCODER_LZ_FALSE=
-fi
-
- if test "x$enable_decoder_lz" = xyes; then
- COND_DECODER_LZ_TRUE=
- COND_DECODER_LZ_FALSE='#'
-else
- COND_DECODER_LZ_TRUE='#'
- COND_DECODER_LZ_FALSE=
-fi
-
-
-
-#################
-# Match finders #
-#################
-
-
-
-enable_match_finder_hc3=no
-enable_match_finder_hc4=no
-enable_match_finder_bt2=no
-enable_match_finder_bt3=no
-enable_match_finder_bt4=no
-
-
-{ $as_echo "$as_me:$LINENO: checking which match finders to build" >&5
-$as_echo_n "checking which match finders to build... " >&6; }
-# Check whether --enable-match-finders was given.
-if test "${enable_match_finders+set}" = set; then
- enableval=$enable_match_finders;
-else
- enable_match_finders=hc3,hc4,bt2,bt3,bt4
-fi
-
-enable_match_finders=`echo "$enable_match_finders" | sed 's/,/ /g'`
-if test "x$enable_encoder" = xyes && test "x$enable_encoder_lz" = xyes ; then
- for arg in $enable_match_finders
- do
- case $arg in
- hc3)
- enable_match_finder_hc3=yes
-
-cat >>confdefs.h <<\_ACEOF
-#define HAVE_MF_HC3 1
-_ACEOF
-
- ;;
- hc4)
- enable_match_finder_hc4=yes
-
-cat >>confdefs.h <<\_ACEOF
-#define HAVE_MF_HC4 1
-_ACEOF
-
- ;;
- bt2)
- enable_match_finder_bt2=yes
-
-cat >>confdefs.h <<\_ACEOF
-#define HAVE_MF_BT2 1
-_ACEOF
-
- ;;
- bt3)
- enable_match_finder_bt3=yes
-
-cat >>confdefs.h <<\_ACEOF
-#define HAVE_MF_BT3 1
-_ACEOF
-
- ;;
- bt4)
- enable_match_finder_bt4=yes
-
-cat >>confdefs.h <<\_ACEOF
-#define HAVE_MF_BT4 1
-_ACEOF
-
- ;;
- *)
- { $as_echo "$as_me:$LINENO: result: " >&5
-$as_echo "" >&6; }
- { { $as_echo "$as_me:$LINENO: error: unknown match finder: $arg" >&5
-$as_echo "$as_me: error: unknown match finder: $arg" >&2;}
- { (exit 1); exit 1; }; }
- ;;
- esac
- done
- { $as_echo "$as_me:$LINENO: result: $enable_match_finders" >&5
-$as_echo "$enable_match_finders" >&6; }
-else
- { $as_echo "$as_me:$LINENO: result: (none because not building any LZ-based encoder)" >&5
-$as_echo "(none because not building any LZ-based encoder)" >&6; }
-fi
-
-
-####################
-# Integrity checks #
-####################
-
-
-
-enable_check_lzma1=no
-enable_check_lzma2=no
-enable_check_subblock=no
-enable_check_delta=no
-enable_check_x86=no
-enable_check_powerpc=no
-enable_check_ia64=no
-enable_check_arm=no
-enable_check_armthumb=no
-enable_check_sparc=no
-
-{ $as_echo "$as_me:$LINENO: checking which integrity checks to build" >&5
-$as_echo_n "checking which integrity checks to build... " >&6; }
-# Check whether --enable-checks was given.
-if test "${enable_checks+set}" = set; then
- enableval=$enable_checks;
-else
- enable_checks=crc32,crc64,sha256
-fi
-
-enable_checks=`echo "$enable_checks" | sed 's/,/ /g'`
-if test "x$enable_checks" = xno || test "x$enable_checks" = x; then
- { $as_echo "$as_me:$LINENO: result: (none)" >&5
-$as_echo "(none)" >&6; }
-else
- for arg in $enable_checks
- do
- case $arg in
- crc32)
- enable_check_crc32=yes
-
-cat >>confdefs.h <<\_ACEOF
-#define HAVE_CHECK_CRC32 1
-_ACEOF
-
- ;;
- crc64)
- enable_check_crc64=yes
-
-cat >>confdefs.h <<\_ACEOF
-#define HAVE_CHECK_CRC64 1
-_ACEOF
-
- ;;
- sha256)
- enable_check_sha256=yes
-
-cat >>confdefs.h <<\_ACEOF
-#define HAVE_CHECK_SHA256 1
-_ACEOF
-
- ;;
- *)
- { $as_echo "$as_me:$LINENO: result: " >&5
-$as_echo "" >&6; }
- { { $as_echo "$as_me:$LINENO: error: unknown integrity check: $arg" >&5
-$as_echo "$as_me: error: unknown integrity check: $arg" >&2;}
- { (exit 1); exit 1; }; }
- ;;
- esac
- done
- { $as_echo "$as_me:$LINENO: result: $enable_checks" >&5
-$as_echo "$enable_checks" >&6; }
-fi
-if test "x$enable_checks_crc32" = xno ; then
- { { $as_echo "$as_me:$LINENO: error: For now, the CRC32 check must always be enabled." >&5
-$as_echo "$as_me: error: For now, the CRC32 check must always be enabled." >&2;}
- { (exit 1); exit 1; }; }
-fi
-
- if test "x$enable_check_crc32" = xyes; then
- COND_CHECK_CRC32_TRUE=
- COND_CHECK_CRC32_FALSE='#'
-else
- COND_CHECK_CRC32_TRUE='#'
- COND_CHECK_CRC32_FALSE=
-fi
-
- if test "x$enable_check_crc64" = xyes; then
- COND_CHECK_CRC64_TRUE=
- COND_CHECK_CRC64_FALSE='#'
-else
- COND_CHECK_CRC64_TRUE='#'
- COND_CHECK_CRC64_FALSE=
-fi
-
- if test "x$enable_check_sha256" = xyes; then
- COND_CHECK_SHA256_TRUE=
- COND_CHECK_SHA256_FALSE='#'
-else
- COND_CHECK_SHA256_TRUE='#'
- COND_CHECK_SHA256_FALSE=
-fi
-
-
-
-###########################
-# Assembler optimizations #
-###########################
-
-{ $as_echo "$as_me:$LINENO: checking if assembler optimizations should be used" >&5
-$as_echo_n "checking if assembler optimizations should be used... " >&6; }
-# Check whether --enable-assembler was given.
-if test "${enable_assembler+set}" = set; then
- enableval=$enable_assembler;
-else
- enable_assembler=yes
-fi
-
-if test "x$enable_assembler" = xyes; then
- case $host_cpu in
- i?86) enable_assembler=x86 ;;
- x86_64) enable_assembler=x86_64 ;;
- *) enable_assembler=no ;;
- esac
-fi
-case $enable_assembler in
- x86)
-
-cat >>confdefs.h <<\_ACEOF
-#define HAVE_ASM_X86 1
-_ACEOF
-
- ;;
- x86_64)
-
-cat >>confdefs.h <<\_ACEOF
-#define HAVE_ASM_X86_64 1
-_ACEOF
-
- ;;
- no)
- ;;
- *)
- { $as_echo "$as_me:$LINENO: result: " >&5
-$as_echo "" >&6; }
- { { $as_echo "$as_me:$LINENO: error: --enable-assembler accepts only \`yes', \`no', \`x86', or \`x86_64'." >&5
-$as_echo "$as_me: error: --enable-assembler accepts only \`yes', \`no', \`x86', or \`x86_64'." >&2;}
- { (exit 1); exit 1; }; }
- ;;
-esac
-{ $as_echo "$as_me:$LINENO: result: $enable_assembler" >&5
-$as_echo "$enable_assembler" >&6; }
- if test "x$enable_assembler" = xx86; then
- COND_ASM_X86_TRUE=
- COND_ASM_X86_FALSE='#'
-else
- COND_ASM_X86_TRUE='#'
- COND_ASM_X86_FALSE=
-fi
-
- if test "x$enable_assembler" = xx86_64; then
- COND_ASM_X86_64_TRUE=
- COND_ASM_X86_64_FALSE='#'
-else
- COND_ASM_X86_64_TRUE='#'
- COND_ASM_X86_64_FALSE=
-fi
-
-
-
-################################
-# Fast unaligned memory access #
-################################
-
-{ $as_echo "$as_me:$LINENO: checking if unaligned memory access should be used" >&5
-$as_echo_n "checking if unaligned memory access should be used... " >&6; }
-# Check whether --enable-unaligned-access was given.
-if test "${enable_unaligned_access+set}" = set; then
- enableval=$enable_unaligned_access;
-else
- enable_unaligned_access=auto
-fi
-
-if test "x$enable_unaligned_access" = xauto ; then
- case $host_cpu in
- i?86|x86_64|powerpc|powerpc64)
- enable_unaligned_access=yes
- ;;
- *)
- enable_unaligned_access=no
- ;;
- esac
-fi
-if test "x$enable_unaligned_access" = xyes ; then
-
-cat >>confdefs.h <<\_ACEOF
-#define HAVE_FAST_UNALIGNED_ACCESS 1
-_ACEOF
-
- { $as_echo "$as_me:$LINENO: result: yes" >&5
-$as_echo "yes" >&6; }
-else
- { $as_echo "$as_me:$LINENO: result: no" >&5
-$as_echo "no" >&6; }
-fi
-
-
-#####################
-# Size optimization #
-#####################
-
-{ $as_echo "$as_me:$LINENO: checking if small size is preferred over speed" >&5
-$as_echo_n "checking if small size is preferred over speed... " >&6; }
-# Check whether --enable-small was given.
-if test "${enable_small+set}" = set; then
- enableval=$enable_small;
-else
- enable_small=no
-fi
-
-if test "x$enable_small" = xyes; then
-
-cat >>confdefs.h <<\_ACEOF
-#define HAVE_SMALL 1
-_ACEOF
-
-elif test "x$enable_small" != xno; then
- { $as_echo "$as_me:$LINENO: result: " >&5
-$as_echo "" >&6; }
- { { $as_echo "$as_me:$LINENO: error: --enable-small accepts only \`yes' or \`no'" >&5
-$as_echo "$as_me: error: --enable-small accepts only \`yes' or \`no'" >&2;}
- { (exit 1); exit 1; }; }
-fi
-{ $as_echo "$as_me:$LINENO: result: $enable_small" >&5
-$as_echo "$enable_small" >&6; }
- if test "x$enable_small" = xyes; then
- COND_SMALL_TRUE=
- COND_SMALL_FALSE='#'
-else
- COND_SMALL_TRUE='#'
- COND_SMALL_FALSE=
-fi
-
-
-
-#############
-# Threading #
-#############
-
-{ $as_echo "$as_me:$LINENO: checking if threading support is wanted" >&5
-$as_echo_n "checking if threading support is wanted... " >&6; }
-# Check whether --enable-threads was given.
-if test "${enable_threads+set}" = set; then
- enableval=$enable_threads;
-else
- enable_threads=yes
-fi
-
-if test "x$enable_threads" != xyes && test "x$enable_threads" != xno; then
- { { $as_echo "$as_me:$LINENO: error: --enable-threads accepts only \`yes' or \`no'" >&5
-$as_echo "$as_me: error: --enable-threads accepts only \`yes' or \`no'" >&2;}
- { (exit 1); exit 1; }; }
-fi
-# We use the actual result a little later.
-
-
-###############################################################################
-# Checks for programs.
-###############################################################################
-
-echo
-echo "Initializing Automake:"
-
-am__api_version='1.10'
-
-# Find a good install program. We prefer a C program (faster),
-# so one script is as good as another. But avoid the broken or
-# incompatible versions:
-# SysV /etc/install, /usr/sbin/install
-# SunOS /usr/etc/install
-# IRIX /sbin/install
-# AIX /bin/install
-# AmigaOS /C/install, which installs bootblocks on floppy discs
-# AIX 4 /usr/bin/installbsd, which doesn't work without a -g flag
-# AFS /usr/afsws/bin/install, which mishandles nonexistent args
-# SVR4 /usr/ucb/install, which tries to use the nonexistent group "staff"
-# OS/2's system install, which has a completely different semantic
-# ./install, which can be erroneously created by make from ./install.sh.
-# Reject install programs that cannot install multiple files.
-{ $as_echo "$as_me:$LINENO: checking for a BSD-compatible install" >&5
-$as_echo_n "checking for a BSD-compatible install... " >&6; }
-if test -z "$INSTALL"; then
-if test "${ac_cv_path_install+set}" = set; then
- $as_echo_n "(cached) " >&6
-else
- as_save_IFS=$IFS; IFS=$PATH_SEPARATOR
-for as_dir in $PATH
-do
- IFS=$as_save_IFS
- test -z "$as_dir" && as_dir=.
- # Account for people who put trailing slashes in PATH elements.
-case $as_dir/ in
- ./ | .// | /cC/* | \
- /etc/* | /usr/sbin/* | /usr/etc/* | /sbin/* | /usr/afsws/bin/* | \
- ?:\\/os2\\/install\\/* | ?:\\/OS2\\/INSTALL\\/* | \
- /usr/ucb/* ) ;;
- *)
- # OSF1 and SCO ODT 3.0 have their own names for install.
- # Don't use installbsd from OSF since it installs stuff as root
- # by default.
- for ac_prog in ginstall scoinst install; do
- for ac_exec_ext in '' $ac_executable_extensions; do
- if { test -f "$as_dir/$ac_prog$ac_exec_ext" && $as_test_x "$as_dir/$ac_prog$ac_exec_ext"; }; then
- if test $ac_prog = install &&
- grep dspmsg "$as_dir/$ac_prog$ac_exec_ext" >/dev/null 2>&1; then
- # AIX install. It has an incompatible calling convention.
- :
- elif test $ac_prog = install &&
- grep pwplus "$as_dir/$ac_prog$ac_exec_ext" >/dev/null 2>&1; then
- # program-specific install script used by HP pwplus--don't use.
- :
- else
- rm -rf conftest.one conftest.two conftest.dir
- echo one > conftest.one
- echo two > conftest.two
- mkdir conftest.dir
- if "$as_dir/$ac_prog$ac_exec_ext" -c conftest.one conftest.two "`pwd`/conftest.dir" &&
- test -s conftest.one && test -s conftest.two &&
- test -s conftest.dir/conftest.one &&
- test -s conftest.dir/conftest.two
- then
- ac_cv_path_install="$as_dir/$ac_prog$ac_exec_ext -c"
- break 3
- fi
- fi
- fi
- done
- done
- ;;
-esac
-
-done
-IFS=$as_save_IFS
-
-rm -rf conftest.one conftest.two conftest.dir
-
-fi
- if test "${ac_cv_path_install+set}" = set; then
- INSTALL=$ac_cv_path_install
- else
- # As a last resort, use the slow shell script. Don't cache a
- # value for INSTALL within a source directory, because that will
- # break other packages using the cache if that directory is
- # removed, or if the value is a relative name.
- INSTALL=$ac_install_sh
- fi
-fi
-{ $as_echo "$as_me:$LINENO: result: $INSTALL" >&5
-$as_echo "$INSTALL" >&6; }
-
-# Use test -z because SunOS4 sh mishandles braces in ${var-val}.
-# It thinks the first close brace ends the variable substitution.
-test -z "$INSTALL_PROGRAM" && INSTALL_PROGRAM='${INSTALL}'
-
-test -z "$INSTALL_SCRIPT" && INSTALL_SCRIPT='${INSTALL}'
-
-test -z "$INSTALL_DATA" && INSTALL_DATA='${INSTALL} -m 644'
-
-{ $as_echo "$as_me:$LINENO: checking whether build environment is sane" >&5
-$as_echo_n "checking whether build environment is sane... " >&6; }
-# Just in case
-sleep 1
-echo timestamp > conftest.file
-# Do `set' in a subshell so we don't clobber the current shell's
-# arguments. Must try -L first in case configure is actually a
-# symlink; some systems play weird games with the mod time of symlinks
-# (eg FreeBSD returns the mod time of the symlink's containing
-# directory).
-if (
- set X `ls -Lt $srcdir/configure conftest.file 2> /dev/null`
- if test "$*" = "X"; then
- # -L didn't work.
- set X `ls -t $srcdir/configure conftest.file`
- fi
- rm -f conftest.file
- if test "$*" != "X $srcdir/configure conftest.file" \
- && test "$*" != "X conftest.file $srcdir/configure"; then
-
- # If neither matched, then we have a broken ls. This can happen
- # if, for instance, CONFIG_SHELL is bash and it inherits a
- # broken ls alias from the environment. This has actually
- # happened. Such a system could not be considered "sane".
- { { $as_echo "$as_me:$LINENO: error: ls -t appears to fail. Make sure there is not a broken
-alias in your environment" >&5
-$as_echo "$as_me: error: ls -t appears to fail. Make sure there is not a broken
-alias in your environment" >&2;}
- { (exit 1); exit 1; }; }
- fi
-
- test "$2" = conftest.file
- )
-then
- # Ok.
- :
-else
- { { $as_echo "$as_me:$LINENO: error: newly created file is older than distributed files!
-Check your system clock" >&5
-$as_echo "$as_me: error: newly created file is older than distributed files!
-Check your system clock" >&2;}
- { (exit 1); exit 1; }; }
-fi
-{ $as_echo "$as_me:$LINENO: result: yes" >&5
-$as_echo "yes" >&6; }
-test "$program_prefix" != NONE &&
- program_transform_name="s&^&$program_prefix&;$program_transform_name"
-# Use a double $ so make ignores it.
-test "$program_suffix" != NONE &&
- program_transform_name="s&\$&$program_suffix&;$program_transform_name"
-# Double any \ or $.
-# By default was `s,x,x', remove it if useless.
-ac_script='s/[\\$]/&&/g;s/;s,x,x,$//'
-program_transform_name=`$as_echo "$program_transform_name" | sed "$ac_script"`
-
-# expand $ac_aux_dir to an absolute path
-am_aux_dir=`cd $ac_aux_dir && pwd`
-
-test x"${MISSING+set}" = xset || MISSING="\${SHELL} $am_aux_dir/missing"
-# Use eval to expand $SHELL
-if eval "$MISSING --run true"; then
- am_missing_run="$MISSING --run "
-else
- am_missing_run=
- { $as_echo "$as_me:$LINENO: WARNING: \`missing' script is too old or missing" >&5
-$as_echo "$as_me: WARNING: \`missing' script is too old or missing" >&2;}
-fi
-
-{ $as_echo "$as_me:$LINENO: checking for a thread-safe mkdir -p" >&5
-$as_echo_n "checking for a thread-safe mkdir -p... " >&6; }
-if test -z "$MKDIR_P"; then
- if test "${ac_cv_path_mkdir+set}" = set; then
- $as_echo_n "(cached) " >&6
-else
- as_save_IFS=$IFS; IFS=$PATH_SEPARATOR
-for as_dir in $PATH$PATH_SEPARATOR/opt/sfw/bin
-do
- IFS=$as_save_IFS
- test -z "$as_dir" && as_dir=.
- for ac_prog in mkdir gmkdir; do
- for ac_exec_ext in '' $ac_executable_extensions; do
- { test -f "$as_dir/$ac_prog$ac_exec_ext" && $as_test_x "$as_dir/$ac_prog$ac_exec_ext"; } || continue
- case `"$as_dir/$ac_prog$ac_exec_ext" --version 2>&1` in #(
- 'mkdir (GNU coreutils) '* | \
- 'mkdir (coreutils) '* | \
- 'mkdir (fileutils) '4.1*)
- ac_cv_path_mkdir=$as_dir/$ac_prog$ac_exec_ext
- break 3;;
- esac
- done
- done
-done
-IFS=$as_save_IFS
-
-fi
-
- if test "${ac_cv_path_mkdir+set}" = set; then
- MKDIR_P="$ac_cv_path_mkdir -p"
- else
- # As a last resort, use the slow shell script. Don't cache a
- # value for MKDIR_P within a source directory, because that will
- # break other packages using the cache if that directory is
- # removed, or if the value is a relative name.
- test -d ./--version && rmdir ./--version
- MKDIR_P="$ac_install_sh -d"
- fi
-fi
-{ $as_echo "$as_me:$LINENO: result: $MKDIR_P" >&5
-$as_echo "$MKDIR_P" >&6; }
-
-mkdir_p="$MKDIR_P"
-case $mkdir_p in
- [\\/$]* | ?:[\\/]*) ;;
- */*) mkdir_p="\$(top_builddir)/$mkdir_p" ;;
-esac
-
-for ac_prog in gawk mawk nawk awk
-do
- # Extract the first word of "$ac_prog", so it can be a program name with args.
-set dummy $ac_prog; ac_word=$2
-{ $as_echo "$as_me:$LINENO: checking for $ac_word" >&5
-$as_echo_n "checking for $ac_word... " >&6; }
-if test "${ac_cv_prog_AWK+set}" = set; then
- $as_echo_n "(cached) " >&6
-else
- if test -n "$AWK"; then
- ac_cv_prog_AWK="$AWK" # Let the user override the test.
-else
-as_save_IFS=$IFS; IFS=$PATH_SEPARATOR
-for as_dir in $PATH
-do
- IFS=$as_save_IFS
- test -z "$as_dir" && as_dir=.
- for ac_exec_ext in '' $ac_executable_extensions; do
- if { test -f "$as_dir/$ac_word$ac_exec_ext" && $as_test_x "$as_dir/$ac_word$ac_exec_ext"; }; then
- ac_cv_prog_AWK="$ac_prog"
- $as_echo "$as_me:$LINENO: found $as_dir/$ac_word$ac_exec_ext" >&5
- break 2
- fi
-done
-done
-IFS=$as_save_IFS
-
-fi
-fi
-AWK=$ac_cv_prog_AWK
-if test -n "$AWK"; then
- { $as_echo "$as_me:$LINENO: result: $AWK" >&5
-$as_echo "$AWK" >&6; }
-else
- { $as_echo "$as_me:$LINENO: result: no" >&5
-$as_echo "no" >&6; }
-fi
-
-
- test -n "$AWK" && break
-done
-
-{ $as_echo "$as_me:$LINENO: checking whether ${MAKE-make} sets \$(MAKE)" >&5
-$as_echo_n "checking whether ${MAKE-make} sets \$(MAKE)... " >&6; }
-set x ${MAKE-make}
-ac_make=`$as_echo "$2" | sed 's/+/p/g; s/[^a-zA-Z0-9_]/_/g'`
-if { as_var=ac_cv_prog_make_${ac_make}_set; eval "test \"\${$as_var+set}\" = set"; }; then
- $as_echo_n "(cached) " >&6
-else
- cat >conftest.make <<\_ACEOF
-SHELL = /bin/sh
-all:
- @echo '@@@%%%=$(MAKE)=@@@%%%'
-_ACEOF
-# GNU make sometimes prints "make[1]: Entering...", which would confuse us.
-case `${MAKE-make} -f conftest.make 2>/dev/null` in
- *@@@%%%=?*=@@@%%%*)
- eval ac_cv_prog_make_${ac_make}_set=yes;;
- *)
- eval ac_cv_prog_make_${ac_make}_set=no;;
-esac
-rm -f conftest.make
-fi
-if eval test \$ac_cv_prog_make_${ac_make}_set = yes; then
- { $as_echo "$as_me:$LINENO: result: yes" >&5
-$as_echo "yes" >&6; }
- SET_MAKE=
-else
- { $as_echo "$as_me:$LINENO: result: no" >&5
-$as_echo "no" >&6; }
- SET_MAKE="MAKE=${MAKE-make}"
-fi
-
-rm -rf .tst 2>/dev/null
-mkdir .tst 2>/dev/null
-if test -d .tst; then
- am__leading_dot=.
-else
- am__leading_dot=_
-fi
-rmdir .tst 2>/dev/null
-
-if test "`cd $srcdir && pwd`" != "`pwd`"; then
- # Use -I$(srcdir) only when $(srcdir) != ., so that make's output
- # is not polluted with repeated "-I."
- am__isrc=' -I$(srcdir)'
- # test to see if srcdir already configured
- if test -f $srcdir/config.status; then
- { { $as_echo "$as_me:$LINENO: error: source directory already configured; run \"make distclean\" there first" >&5
-$as_echo "$as_me: error: source directory already configured; run \"make distclean\" there first" >&2;}
- { (exit 1); exit 1; }; }
- fi
-fi
-
-# test whether we have cygpath
-if test -z "$CYGPATH_W"; then
- if (cygpath --version) >/dev/null 2>/dev/null; then
- CYGPATH_W='cygpath -w'
- else
- CYGPATH_W=echo
- fi
-fi
-
-
-# Define the identity of the package.
- PACKAGE='xz'
- VERSION='4.999.8beta'
-
-
-cat >>confdefs.h <<_ACEOF
-#define PACKAGE "$PACKAGE"
-_ACEOF
-
-
-cat >>confdefs.h <<_ACEOF
-#define VERSION "$VERSION"
-_ACEOF
-
-# Some tools Automake needs.
-
-ACLOCAL=${ACLOCAL-"${am_missing_run}aclocal-${am__api_version}"}
-
-
-AUTOCONF=${AUTOCONF-"${am_missing_run}autoconf"}
-
-
-AUTOMAKE=${AUTOMAKE-"${am_missing_run}automake-${am__api_version}"}
-
-
-AUTOHEADER=${AUTOHEADER-"${am_missing_run}autoheader"}
-
-
-MAKEINFO=${MAKEINFO-"${am_missing_run}makeinfo"}
-
-install_sh=${install_sh-"\$(SHELL) $am_aux_dir/install-sh"}
-
-# Installed binaries are usually stripped using `strip' when the user
-# run `make install-strip'. However `strip' might not be the right
-# tool to use in cross-compilation environments, therefore Automake
-# will honor the `STRIP' environment variable to overrule this program.
-if test "$cross_compiling" != no; then
- if test -n "$ac_tool_prefix"; then
- # Extract the first word of "${ac_tool_prefix}strip", so it can be a program name with args.
-set dummy ${ac_tool_prefix}strip; ac_word=$2
-{ $as_echo "$as_me:$LINENO: checking for $ac_word" >&5
-$as_echo_n "checking for $ac_word... " >&6; }
-if test "${ac_cv_prog_STRIP+set}" = set; then
- $as_echo_n "(cached) " >&6
-else
- if test -n "$STRIP"; then
- ac_cv_prog_STRIP="$STRIP" # Let the user override the test.
-else
-as_save_IFS=$IFS; IFS=$PATH_SEPARATOR
-for as_dir in $PATH
-do
- IFS=$as_save_IFS
- test -z "$as_dir" && as_dir=.
- for ac_exec_ext in '' $ac_executable_extensions; do
- if { test -f "$as_dir/$ac_word$ac_exec_ext" && $as_test_x "$as_dir/$ac_word$ac_exec_ext"; }; then
- ac_cv_prog_STRIP="${ac_tool_prefix}strip"
- $as_echo "$as_me:$LINENO: found $as_dir/$ac_word$ac_exec_ext" >&5
- break 2
- fi
-done
-done
-IFS=$as_save_IFS
-
-fi
-fi
-STRIP=$ac_cv_prog_STRIP
-if test -n "$STRIP"; then
- { $as_echo "$as_me:$LINENO: result: $STRIP" >&5
-$as_echo "$STRIP" >&6; }
-else
- { $as_echo "$as_me:$LINENO: result: no" >&5
-$as_echo "no" >&6; }
-fi
-
-
-fi
-if test -z "$ac_cv_prog_STRIP"; then
- ac_ct_STRIP=$STRIP
- # Extract the first word of "strip", so it can be a program name with args.
-set dummy strip; ac_word=$2
-{ $as_echo "$as_me:$LINENO: checking for $ac_word" >&5
-$as_echo_n "checking for $ac_word... " >&6; }
-if test "${ac_cv_prog_ac_ct_STRIP+set}" = set; then
- $as_echo_n "(cached) " >&6
-else
- if test -n "$ac_ct_STRIP"; then
- ac_cv_prog_ac_ct_STRIP="$ac_ct_STRIP" # Let the user override the test.
-else
-as_save_IFS=$IFS; IFS=$PATH_SEPARATOR
-for as_dir in $PATH
-do
- IFS=$as_save_IFS
- test -z "$as_dir" && as_dir=.
- for ac_exec_ext in '' $ac_executable_extensions; do
- if { test -f "$as_dir/$ac_word$ac_exec_ext" && $as_test_x "$as_dir/$ac_word$ac_exec_ext"; }; then
- ac_cv_prog_ac_ct_STRIP="strip"
- $as_echo "$as_me:$LINENO: found $as_dir/$ac_word$ac_exec_ext" >&5
- break 2
- fi
-done
-done
-IFS=$as_save_IFS
-
-fi
-fi
-ac_ct_STRIP=$ac_cv_prog_ac_ct_STRIP
-if test -n "$ac_ct_STRIP"; then
- { $as_echo "$as_me:$LINENO: result: $ac_ct_STRIP" >&5
-$as_echo "$ac_ct_STRIP" >&6; }
-else
- { $as_echo "$as_me:$LINENO: result: no" >&5
-$as_echo "no" >&6; }
-fi
-
- if test "x$ac_ct_STRIP" = x; then
- STRIP=":"
- else
- case $cross_compiling:$ac_tool_warned in
-yes:)
-{ $as_echo "$as_me:$LINENO: WARNING: In the future, Autoconf will not detect cross-tools
-whose name does not start with the host triplet. If you think this
-configuration is useful to you, please write to autoconf@gnu.org." >&5
-$as_echo "$as_me: WARNING: In the future, Autoconf will not detect cross-tools
-whose name does not start with the host triplet. If you think this
-configuration is useful to you, please write to autoconf@gnu.org." >&2;}
-ac_tool_warned=yes ;;
-esac
- STRIP=$ac_ct_STRIP
- fi
-else
- STRIP="$ac_cv_prog_STRIP"
-fi
-
-fi
-INSTALL_STRIP_PROGRAM="\$(install_sh) -c -s"
-
-# We need awk for the "check" target. The system "awk" is bad on
-# some platforms.
-# Always define AMTAR for backward compatibility.
-
-AMTAR=${AMTAR-"${am_missing_run}tar"}
-
-am__tar='${AMTAR} chof - "$$tardir"'; am__untar='${AMTAR} xf -'
-
-
-
-
-
-{ $as_echo "$as_me:$LINENO: checking whether ln -s works" >&5
-$as_echo_n "checking whether ln -s works... " >&6; }
-LN_S=$as_ln_s
-if test "$LN_S" = "ln -s"; then
- { $as_echo "$as_me:$LINENO: result: yes" >&5
-$as_echo "yes" >&6; }
-else
- { $as_echo "$as_me:$LINENO: result: no, using $LN_S" >&5
-$as_echo "no, using $LN_S" >&6; }
-fi
-
-
-DEPDIR="${am__leading_dot}deps"
-
-ac_config_commands="$ac_config_commands depfiles"
-
-
-am_make=${MAKE-make}
-cat > confinc << 'END'
-am__doit:
- @echo done
-.PHONY: am__doit
-END
-# If we don't find an include directive, just comment out the code.
-{ $as_echo "$as_me:$LINENO: checking for style of include used by $am_make" >&5
-$as_echo_n "checking for style of include used by $am_make... " >&6; }
-am__include="#"
-am__quote=
-_am_result=none
-# First try GNU make style include.
-echo "include confinc" > confmf
-# We grep out `Entering directory' and `Leaving directory'
-# messages which can occur if `w' ends up in MAKEFLAGS.
-# In particular we don't look at `^make:' because GNU make might
-# be invoked under some other name (usually "gmake"), in which
-# case it prints its new name instead of `make'.
-if test "`$am_make -s -f confmf 2> /dev/null | grep -v 'ing directory'`" = "done"; then
- am__include=include
- am__quote=
- _am_result=GNU
-fi
-# Now try BSD make style include.
-if test "$am__include" = "#"; then
- echo '.include "confinc"' > confmf
- if test "`$am_make -s -f confmf 2> /dev/null`" = "done"; then
- am__include=.include
- am__quote="\""
- _am_result=BSD
- fi
-fi
-
-
-{ $as_echo "$as_me:$LINENO: result: $_am_result" >&5
-$as_echo "$_am_result" >&6; }
-rm -f confinc confmf
-
-# Check whether --enable-dependency-tracking was given.
-if test "${enable_dependency_tracking+set}" = set; then
- enableval=$enable_dependency_tracking;
-fi
-
-if test "x$enable_dependency_tracking" != xno; then
- am_depcomp="$ac_aux_dir/depcomp"
- AMDEPBACKSLASH='\'
-fi
- if test "x$enable_dependency_tracking" != xno; then
- AMDEP_TRUE=
- AMDEP_FALSE='#'
-else
- AMDEP_TRUE='#'
- AMDEP_FALSE=
-fi
-
-
-ac_ext=c
-ac_cpp='$CPP $CPPFLAGS'
-ac_compile='$CC -c $CFLAGS $CPPFLAGS conftest.$ac_ext >&5'
-ac_link='$CC -o conftest$ac_exeext $CFLAGS $CPPFLAGS $LDFLAGS conftest.$ac_ext $LIBS >&5'
-ac_compiler_gnu=$ac_cv_c_compiler_gnu
-if test -n "$ac_tool_prefix"; then
- # Extract the first word of "${ac_tool_prefix}gcc", so it can be a program name with args.
-set dummy ${ac_tool_prefix}gcc; ac_word=$2
-{ $as_echo "$as_me:$LINENO: checking for $ac_word" >&5
-$as_echo_n "checking for $ac_word... " >&6; }
-if test "${ac_cv_prog_CC+set}" = set; then
- $as_echo_n "(cached) " >&6
-else
- if test -n "$CC"; then
- ac_cv_prog_CC="$CC" # Let the user override the test.
-else
-as_save_IFS=$IFS; IFS=$PATH_SEPARATOR
-for as_dir in $PATH
-do
- IFS=$as_save_IFS
- test -z "$as_dir" && as_dir=.
- for ac_exec_ext in '' $ac_executable_extensions; do
- if { test -f "$as_dir/$ac_word$ac_exec_ext" && $as_test_x "$as_dir/$ac_word$ac_exec_ext"; }; then
- ac_cv_prog_CC="${ac_tool_prefix}gcc"
- $as_echo "$as_me:$LINENO: found $as_dir/$ac_word$ac_exec_ext" >&5
- break 2
- fi
-done
-done
-IFS=$as_save_IFS
-
-fi
-fi
-CC=$ac_cv_prog_CC
-if test -n "$CC"; then
- { $as_echo "$as_me:$LINENO: result: $CC" >&5
-$as_echo "$CC" >&6; }
-else
- { $as_echo "$as_me:$LINENO: result: no" >&5
-$as_echo "no" >&6; }
-fi
-
-
-fi
-if test -z "$ac_cv_prog_CC"; then
- ac_ct_CC=$CC
- # Extract the first word of "gcc", so it can be a program name with args.
-set dummy gcc; ac_word=$2
-{ $as_echo "$as_me:$LINENO: checking for $ac_word" >&5
-$as_echo_n "checking for $ac_word... " >&6; }
-if test "${ac_cv_prog_ac_ct_CC+set}" = set; then
- $as_echo_n "(cached) " >&6
-else
- if test -n "$ac_ct_CC"; then
- ac_cv_prog_ac_ct_CC="$ac_ct_CC" # Let the user override the test.
-else
-as_save_IFS=$IFS; IFS=$PATH_SEPARATOR
-for as_dir in $PATH
-do
- IFS=$as_save_IFS
- test -z "$as_dir" && as_dir=.
- for ac_exec_ext in '' $ac_executable_extensions; do
- if { test -f "$as_dir/$ac_word$ac_exec_ext" && $as_test_x "$as_dir/$ac_word$ac_exec_ext"; }; then
- ac_cv_prog_ac_ct_CC="gcc"
- $as_echo "$as_me:$LINENO: found $as_dir/$ac_word$ac_exec_ext" >&5
- break 2
- fi
-done
-done
-IFS=$as_save_IFS
-
-fi
-fi
-ac_ct_CC=$ac_cv_prog_ac_ct_CC
-if test -n "$ac_ct_CC"; then
- { $as_echo "$as_me:$LINENO: result: $ac_ct_CC" >&5
-$as_echo "$ac_ct_CC" >&6; }
-else
- { $as_echo "$as_me:$LINENO: result: no" >&5
-$as_echo "no" >&6; }
-fi
-
- if test "x$ac_ct_CC" = x; then
- CC=""
- else
- case $cross_compiling:$ac_tool_warned in
-yes:)
-{ $as_echo "$as_me:$LINENO: WARNING: In the future, Autoconf will not detect cross-tools
-whose name does not start with the host triplet. If you think this
-configuration is useful to you, please write to autoconf@gnu.org." >&5
-$as_echo "$as_me: WARNING: In the future, Autoconf will not detect cross-tools
-whose name does not start with the host triplet. If you think this
-configuration is useful to you, please write to autoconf@gnu.org." >&2;}
-ac_tool_warned=yes ;;
-esac
- CC=$ac_ct_CC
- fi
-else
- CC="$ac_cv_prog_CC"
-fi
-
-if test -z "$CC"; then
- if test -n "$ac_tool_prefix"; then
- # Extract the first word of "${ac_tool_prefix}cc", so it can be a program name with args.
-set dummy ${ac_tool_prefix}cc; ac_word=$2
-{ $as_echo "$as_me:$LINENO: checking for $ac_word" >&5
-$as_echo_n "checking for $ac_word... " >&6; }
-if test "${ac_cv_prog_CC+set}" = set; then
- $as_echo_n "(cached) " >&6
-else
- if test -n "$CC"; then
- ac_cv_prog_CC="$CC" # Let the user override the test.
-else
-as_save_IFS=$IFS; IFS=$PATH_SEPARATOR
-for as_dir in $PATH
-do
- IFS=$as_save_IFS
- test -z "$as_dir" && as_dir=.
- for ac_exec_ext in '' $ac_executable_extensions; do
- if { test -f "$as_dir/$ac_word$ac_exec_ext" && $as_test_x "$as_dir/$ac_word$ac_exec_ext"; }; then
- ac_cv_prog_CC="${ac_tool_prefix}cc"
- $as_echo "$as_me:$LINENO: found $as_dir/$ac_word$ac_exec_ext" >&5
- break 2
- fi
-done
-done
-IFS=$as_save_IFS
-
-fi
-fi
-CC=$ac_cv_prog_CC
-if test -n "$CC"; then
- { $as_echo "$as_me:$LINENO: result: $CC" >&5
-$as_echo "$CC" >&6; }
-else
- { $as_echo "$as_me:$LINENO: result: no" >&5
-$as_echo "no" >&6; }
-fi
-
-
- fi
-fi
-if test -z "$CC"; then
- # Extract the first word of "cc", so it can be a program name with args.
-set dummy cc; ac_word=$2
-{ $as_echo "$as_me:$LINENO: checking for $ac_word" >&5
-$as_echo_n "checking for $ac_word... " >&6; }
-if test "${ac_cv_prog_CC+set}" = set; then
- $as_echo_n "(cached) " >&6
-else
- if test -n "$CC"; then
- ac_cv_prog_CC="$CC" # Let the user override the test.
-else
- ac_prog_rejected=no
-as_save_IFS=$IFS; IFS=$PATH_SEPARATOR
-for as_dir in $PATH
-do
- IFS=$as_save_IFS
- test -z "$as_dir" && as_dir=.
- for ac_exec_ext in '' $ac_executable_extensions; do
- if { test -f "$as_dir/$ac_word$ac_exec_ext" && $as_test_x "$as_dir/$ac_word$ac_exec_ext"; }; then
- if test "$as_dir/$ac_word$ac_exec_ext" = "/usr/ucb/cc"; then
- ac_prog_rejected=yes
- continue
- fi
- ac_cv_prog_CC="cc"
- $as_echo "$as_me:$LINENO: found $as_dir/$ac_word$ac_exec_ext" >&5
- break 2
- fi
-done
-done
-IFS=$as_save_IFS
-
-if test $ac_prog_rejected = yes; then
- # We found a bogon in the path, so make sure we never use it.
- set dummy $ac_cv_prog_CC
- shift
- if test $# != 0; then
- # We chose a different compiler from the bogus one.
- # However, it has the same basename, so the bogon will be chosen
- # first if we set CC to just the basename; use the full file name.
- shift
- ac_cv_prog_CC="$as_dir/$ac_word${1+' '}$@"
- fi
-fi
-fi
-fi
-CC=$ac_cv_prog_CC
-if test -n "$CC"; then
- { $as_echo "$as_me:$LINENO: result: $CC" >&5
-$as_echo "$CC" >&6; }
-else
- { $as_echo "$as_me:$LINENO: result: no" >&5
-$as_echo "no" >&6; }
-fi
-
-
-fi
-if test -z "$CC"; then
- if test -n "$ac_tool_prefix"; then
- for ac_prog in cl.exe
- do
- # Extract the first word of "$ac_tool_prefix$ac_prog", so it can be a program name with args.
-set dummy $ac_tool_prefix$ac_prog; ac_word=$2
-{ $as_echo "$as_me:$LINENO: checking for $ac_word" >&5
-$as_echo_n "checking for $ac_word... " >&6; }
-if test "${ac_cv_prog_CC+set}" = set; then
- $as_echo_n "(cached) " >&6
-else
- if test -n "$CC"; then
- ac_cv_prog_CC="$CC" # Let the user override the test.
-else
-as_save_IFS=$IFS; IFS=$PATH_SEPARATOR
-for as_dir in $PATH
-do
- IFS=$as_save_IFS
- test -z "$as_dir" && as_dir=.
- for ac_exec_ext in '' $ac_executable_extensions; do
- if { test -f "$as_dir/$ac_word$ac_exec_ext" && $as_test_x "$as_dir/$ac_word$ac_exec_ext"; }; then
- ac_cv_prog_CC="$ac_tool_prefix$ac_prog"
- $as_echo "$as_me:$LINENO: found $as_dir/$ac_word$ac_exec_ext" >&5
- break 2
- fi
-done
-done
-IFS=$as_save_IFS
-
-fi
-fi
-CC=$ac_cv_prog_CC
-if test -n "$CC"; then
- { $as_echo "$as_me:$LINENO: result: $CC" >&5
-$as_echo "$CC" >&6; }
-else
- { $as_echo "$as_me:$LINENO: result: no" >&5
-$as_echo "no" >&6; }
-fi
-
-
- test -n "$CC" && break
- done
-fi
-if test -z "$CC"; then
- ac_ct_CC=$CC
- for ac_prog in cl.exe
-do
- # Extract the first word of "$ac_prog", so it can be a program name with args.
-set dummy $ac_prog; ac_word=$2
-{ $as_echo "$as_me:$LINENO: checking for $ac_word" >&5
-$as_echo_n "checking for $ac_word... " >&6; }
-if test "${ac_cv_prog_ac_ct_CC+set}" = set; then
- $as_echo_n "(cached) " >&6
-else
- if test -n "$ac_ct_CC"; then
- ac_cv_prog_ac_ct_CC="$ac_ct_CC" # Let the user override the test.
-else
-as_save_IFS=$IFS; IFS=$PATH_SEPARATOR
-for as_dir in $PATH
-do
- IFS=$as_save_IFS
- test -z "$as_dir" && as_dir=.
- for ac_exec_ext in '' $ac_executable_extensions; do
- if { test -f "$as_dir/$ac_word$ac_exec_ext" && $as_test_x "$as_dir/$ac_word$ac_exec_ext"; }; then
- ac_cv_prog_ac_ct_CC="$ac_prog"
- $as_echo "$as_me:$LINENO: found $as_dir/$ac_word$ac_exec_ext" >&5
- break 2
- fi
-done
-done
-IFS=$as_save_IFS
-
-fi
-fi
-ac_ct_CC=$ac_cv_prog_ac_ct_CC
-if test -n "$ac_ct_CC"; then
- { $as_echo "$as_me:$LINENO: result: $ac_ct_CC" >&5
-$as_echo "$ac_ct_CC" >&6; }
-else
- { $as_echo "$as_me:$LINENO: result: no" >&5
-$as_echo "no" >&6; }
-fi
-
-
- test -n "$ac_ct_CC" && break
-done
-
- if test "x$ac_ct_CC" = x; then
- CC=""
- else
- case $cross_compiling:$ac_tool_warned in
-yes:)
-{ $as_echo "$as_me:$LINENO: WARNING: In the future, Autoconf will not detect cross-tools
-whose name does not start with the host triplet. If you think this
-configuration is useful to you, please write to autoconf@gnu.org." >&5
-$as_echo "$as_me: WARNING: In the future, Autoconf will not detect cross-tools
-whose name does not start with the host triplet. If you think this
-configuration is useful to you, please write to autoconf@gnu.org." >&2;}
-ac_tool_warned=yes ;;
-esac
- CC=$ac_ct_CC
- fi
-fi
-
-fi
-
-
-test -z "$CC" && { { $as_echo "$as_me:$LINENO: error: no acceptable C compiler found in \$PATH
-See \`config.log' for more details." >&5
-$as_echo "$as_me: error: no acceptable C compiler found in \$PATH
-See \`config.log' for more details." >&2;}
- { (exit 1); exit 1; }; }
-
-# Provide some information about the compiler.
-$as_echo "$as_me:$LINENO: checking for C compiler version" >&5
-set X $ac_compile
-ac_compiler=$2
-{ (ac_try="$ac_compiler --version >&5"
-case "(($ac_try" in
- *\"* | *\`* | *\\*) ac_try_echo=\$ac_try;;
- *) ac_try_echo=$ac_try;;
-esac
-eval ac_try_echo="\"\$as_me:$LINENO: $ac_try_echo\""
-$as_echo "$ac_try_echo") >&5
- (eval "$ac_compiler --version >&5") 2>&5
- ac_status=$?
- $as_echo "$as_me:$LINENO: \$? = $ac_status" >&5
- (exit $ac_status); }
-{ (ac_try="$ac_compiler -v >&5"
-case "(($ac_try" in
- *\"* | *\`* | *\\*) ac_try_echo=\$ac_try;;
- *) ac_try_echo=$ac_try;;
-esac
-eval ac_try_echo="\"\$as_me:$LINENO: $ac_try_echo\""
-$as_echo "$ac_try_echo") >&5
- (eval "$ac_compiler -v >&5") 2>&5
- ac_status=$?
- $as_echo "$as_me:$LINENO: \$? = $ac_status" >&5
- (exit $ac_status); }
-{ (ac_try="$ac_compiler -V >&5"
-case "(($ac_try" in
- *\"* | *\`* | *\\*) ac_try_echo=\$ac_try;;
- *) ac_try_echo=$ac_try;;
-esac
-eval ac_try_echo="\"\$as_me:$LINENO: $ac_try_echo\""
-$as_echo "$ac_try_echo") >&5
- (eval "$ac_compiler -V >&5") 2>&5
- ac_status=$?
- $as_echo "$as_me:$LINENO: \$? = $ac_status" >&5
- (exit $ac_status); }
-
-cat >conftest.$ac_ext <<_ACEOF
-/* confdefs.h. */
-_ACEOF
-cat confdefs.h >>conftest.$ac_ext
-cat >>conftest.$ac_ext <<_ACEOF
-/* end confdefs.h. */
-
-int
-main ()
-{
-
- ;
- return 0;
-}
-_ACEOF
-ac_clean_files_save=$ac_clean_files
-ac_clean_files="$ac_clean_files a.out a.out.dSYM a.exe b.out"
-# Try to create an executable without -o first, disregard a.out.
-# It will help us diagnose broken compilers, and finding out an intuition
-# of exeext.
-{ $as_echo "$as_me:$LINENO: checking for C compiler default output file name" >&5
-$as_echo_n "checking for C compiler default output file name... " >&6; }
-ac_link_default=`$as_echo "$ac_link" | sed 's/ -o *conftest[^ ]*//'`
-
-# The possible output files:
-ac_files="a.out conftest.exe conftest a.exe a_out.exe b.out conftest.*"
-
-ac_rmfiles=
-for ac_file in $ac_files
-do
- case $ac_file in
- *.$ac_ext | *.xcoff | *.tds | *.d | *.pdb | *.xSYM | *.bb | *.bbg | *.map | *.inf | *.dSYM | *.o | *.obj ) ;;
- * ) ac_rmfiles="$ac_rmfiles $ac_file";;
- esac
-done
-rm -f $ac_rmfiles
-
-if { (ac_try="$ac_link_default"
-case "(($ac_try" in
- *\"* | *\`* | *\\*) ac_try_echo=\$ac_try;;
- *) ac_try_echo=$ac_try;;
-esac
-eval ac_try_echo="\"\$as_me:$LINENO: $ac_try_echo\""
-$as_echo "$ac_try_echo") >&5
- (eval "$ac_link_default") 2>&5
- ac_status=$?
- $as_echo "$as_me:$LINENO: \$? = $ac_status" >&5
- (exit $ac_status); }; then
- # Autoconf-2.13 could set the ac_cv_exeext variable to `no'.
-# So ignore a value of `no', otherwise this would lead to `EXEEXT = no'
-# in a Makefile. We should not override ac_cv_exeext if it was cached,
-# so that the user can short-circuit this test for compilers unknown to
-# Autoconf.
-for ac_file in $ac_files ''
-do
- test -f "$ac_file" || continue
- case $ac_file in
- *.$ac_ext | *.xcoff | *.tds | *.d | *.pdb | *.xSYM | *.bb | *.bbg | *.map | *.inf | *.dSYM | *.o | *.obj )
- ;;
- [ab].out )
- # We found the default executable, but exeext='' is most
- # certainly right.
- break;;
- *.* )
- if test "${ac_cv_exeext+set}" = set && test "$ac_cv_exeext" != no;
- then :; else
- ac_cv_exeext=`expr "$ac_file" : '[^.]*\(\..*\)'`
- fi
- # We set ac_cv_exeext here because the later test for it is not
- # safe: cross compilers may not add the suffix if given an `-o'
- # argument, so we may need to know it at that point already.
- # Even if this section looks crufty: it has the advantage of
- # actually working.
- break;;
- * )
- break;;
- esac
-done
-test "$ac_cv_exeext" = no && ac_cv_exeext=
-
-else
- ac_file=''
-fi
-
-{ $as_echo "$as_me:$LINENO: result: $ac_file" >&5
-$as_echo "$ac_file" >&6; }
-if test -z "$ac_file"; then
- $as_echo "$as_me: failed program was:" >&5
-sed 's/^/| /' conftest.$ac_ext >&5
-
-{ { $as_echo "$as_me:$LINENO: error: C compiler cannot create executables
-See \`config.log' for more details." >&5
-$as_echo "$as_me: error: C compiler cannot create executables
-See \`config.log' for more details." >&2;}
- { (exit 77); exit 77; }; }
-fi
-
-ac_exeext=$ac_cv_exeext
-
-# Check that the compiler produces executables we can run. If not, either
-# the compiler is broken, or we cross compile.
-{ $as_echo "$as_me:$LINENO: checking whether the C compiler works" >&5
-$as_echo_n "checking whether the C compiler works... " >&6; }
-# FIXME: These cross compiler hacks should be removed for Autoconf 3.0
-# If not cross compiling, check that we can run a simple program.
-if test "$cross_compiling" != yes; then
- if { ac_try='./$ac_file'
- { (case "(($ac_try" in
- *\"* | *\`* | *\\*) ac_try_echo=\$ac_try;;
- *) ac_try_echo=$ac_try;;
-esac
-eval ac_try_echo="\"\$as_me:$LINENO: $ac_try_echo\""
-$as_echo "$ac_try_echo") >&5
- (eval "$ac_try") 2>&5
- ac_status=$?
- $as_echo "$as_me:$LINENO: \$? = $ac_status" >&5
- (exit $ac_status); }; }; then
- cross_compiling=no
- else
- if test "$cross_compiling" = maybe; then
- cross_compiling=yes
- else
- { { $as_echo "$as_me:$LINENO: error: cannot run C compiled programs.
-If you meant to cross compile, use \`--host'.
-See \`config.log' for more details." >&5
-$as_echo "$as_me: error: cannot run C compiled programs.
-If you meant to cross compile, use \`--host'.
-See \`config.log' for more details." >&2;}
- { (exit 1); exit 1; }; }
- fi
- fi
-fi
-{ $as_echo "$as_me:$LINENO: result: yes" >&5
-$as_echo "yes" >&6; }
-
-rm -f -r a.out a.out.dSYM a.exe conftest$ac_cv_exeext b.out
-ac_clean_files=$ac_clean_files_save
-# Check that the compiler produces executables we can run. If not, either
-# the compiler is broken, or we cross compile.
-{ $as_echo "$as_me:$LINENO: checking whether we are cross compiling" >&5
-$as_echo_n "checking whether we are cross compiling... " >&6; }
-{ $as_echo "$as_me:$LINENO: result: $cross_compiling" >&5
-$as_echo "$cross_compiling" >&6; }
-
-{ $as_echo "$as_me:$LINENO: checking for suffix of executables" >&5
-$as_echo_n "checking for suffix of executables... " >&6; }
-if { (ac_try="$ac_link"
-case "(($ac_try" in
- *\"* | *\`* | *\\*) ac_try_echo=\$ac_try;;
- *) ac_try_echo=$ac_try;;
-esac
-eval ac_try_echo="\"\$as_me:$LINENO: $ac_try_echo\""
-$as_echo "$ac_try_echo") >&5
- (eval "$ac_link") 2>&5
- ac_status=$?
- $as_echo "$as_me:$LINENO: \$? = $ac_status" >&5
- (exit $ac_status); }; then
- # If both `conftest.exe' and `conftest' are `present' (well, observable)
-# catch `conftest.exe'. For instance with Cygwin, `ls conftest' will
-# work properly (i.e., refer to `conftest.exe'), while it won't with
-# `rm'.
-for ac_file in conftest.exe conftest conftest.*; do
- test -f "$ac_file" || continue
- case $ac_file in
- *.$ac_ext | *.xcoff | *.tds | *.d | *.pdb | *.xSYM | *.bb | *.bbg | *.map | *.inf | *.dSYM | *.o | *.obj ) ;;
- *.* ) ac_cv_exeext=`expr "$ac_file" : '[^.]*\(\..*\)'`
- break;;
- * ) break;;
- esac
-done
-else
- { { $as_echo "$as_me:$LINENO: error: cannot compute suffix of executables: cannot compile and link
-See \`config.log' for more details." >&5
-$as_echo "$as_me: error: cannot compute suffix of executables: cannot compile and link
-See \`config.log' for more details." >&2;}
- { (exit 1); exit 1; }; }
-fi
-
-rm -f conftest$ac_cv_exeext
-{ $as_echo "$as_me:$LINENO: result: $ac_cv_exeext" >&5
-$as_echo "$ac_cv_exeext" >&6; }
-
-rm -f conftest.$ac_ext
-EXEEXT=$ac_cv_exeext
-ac_exeext=$EXEEXT
-{ $as_echo "$as_me:$LINENO: checking for suffix of object files" >&5
-$as_echo_n "checking for suffix of object files... " >&6; }
-if test "${ac_cv_objext+set}" = set; then
- $as_echo_n "(cached) " >&6
-else
- cat >conftest.$ac_ext <<_ACEOF
-/* confdefs.h. */
-_ACEOF
-cat confdefs.h >>conftest.$ac_ext
-cat >>conftest.$ac_ext <<_ACEOF
-/* end confdefs.h. */
-
-int
-main ()
-{
-
- ;
- return 0;
-}
-_ACEOF
-rm -f conftest.o conftest.obj
-if { (ac_try="$ac_compile"
-case "(($ac_try" in
- *\"* | *\`* | *\\*) ac_try_echo=\$ac_try;;
- *) ac_try_echo=$ac_try;;
-esac
-eval ac_try_echo="\"\$as_me:$LINENO: $ac_try_echo\""
-$as_echo "$ac_try_echo") >&5
- (eval "$ac_compile") 2>&5
- ac_status=$?
- $as_echo "$as_me:$LINENO: \$? = $ac_status" >&5
- (exit $ac_status); }; then
- for ac_file in conftest.o conftest.obj conftest.*; do
- test -f "$ac_file" || continue;
- case $ac_file in
- *.$ac_ext | *.xcoff | *.tds | *.d | *.pdb | *.xSYM | *.bb | *.bbg | *.map | *.inf | *.dSYM ) ;;
- *) ac_cv_objext=`expr "$ac_file" : '.*\.\(.*\)'`
- break;;
- esac
-done
-else
- $as_echo "$as_me: failed program was:" >&5
-sed 's/^/| /' conftest.$ac_ext >&5
-
-{ { $as_echo "$as_me:$LINENO: error: cannot compute suffix of object files: cannot compile
-See \`config.log' for more details." >&5
-$as_echo "$as_me: error: cannot compute suffix of object files: cannot compile
-See \`config.log' for more details." >&2;}
- { (exit 1); exit 1; }; }
-fi
-
-rm -f conftest.$ac_cv_objext conftest.$ac_ext
-fi
-{ $as_echo "$as_me:$LINENO: result: $ac_cv_objext" >&5
-$as_echo "$ac_cv_objext" >&6; }
-OBJEXT=$ac_cv_objext
-ac_objext=$OBJEXT
-{ $as_echo "$as_me:$LINENO: checking whether we are using the GNU C compiler" >&5
-$as_echo_n "checking whether we are using the GNU C compiler... " >&6; }
-if test "${ac_cv_c_compiler_gnu+set}" = set; then
- $as_echo_n "(cached) " >&6
-else
- cat >conftest.$ac_ext <<_ACEOF
-/* confdefs.h. */
-_ACEOF
-cat confdefs.h >>conftest.$ac_ext
-cat >>conftest.$ac_ext <<_ACEOF
-/* end confdefs.h. */
-
-int
-main ()
-{
-#ifndef __GNUC__
- choke me
-#endif
-
- ;
- return 0;
-}
-_ACEOF
-rm -f conftest.$ac_objext
-if { (ac_try="$ac_compile"
-case "(($ac_try" in
- *\"* | *\`* | *\\*) ac_try_echo=\$ac_try;;
- *) ac_try_echo=$ac_try;;
-esac
-eval ac_try_echo="\"\$as_me:$LINENO: $ac_try_echo\""
-$as_echo "$ac_try_echo") >&5
- (eval "$ac_compile") 2>conftest.er1
- ac_status=$?
- grep -v '^ *+' conftest.er1 >conftest.err
- rm -f conftest.er1
- cat conftest.err >&5
- $as_echo "$as_me:$LINENO: \$? = $ac_status" >&5
- (exit $ac_status); } && {
- test -z "$ac_c_werror_flag" ||
- test ! -s conftest.err
- } && test -s conftest.$ac_objext; then
- ac_compiler_gnu=yes
-else
- $as_echo "$as_me: failed program was:" >&5
-sed 's/^/| /' conftest.$ac_ext >&5
-
- ac_compiler_gnu=no
-fi
-
-rm -f core conftest.err conftest.$ac_objext conftest.$ac_ext
-ac_cv_c_compiler_gnu=$ac_compiler_gnu
-
-fi
-{ $as_echo "$as_me:$LINENO: result: $ac_cv_c_compiler_gnu" >&5
-$as_echo "$ac_cv_c_compiler_gnu" >&6; }
-if test $ac_compiler_gnu = yes; then
- GCC=yes
-else
- GCC=
-fi
-ac_test_CFLAGS=${CFLAGS+set}
-ac_save_CFLAGS=$CFLAGS
-{ $as_echo "$as_me:$LINENO: checking whether $CC accepts -g" >&5
-$as_echo_n "checking whether $CC accepts -g... " >&6; }
-if test "${ac_cv_prog_cc_g+set}" = set; then
- $as_echo_n "(cached) " >&6
-else
- ac_save_c_werror_flag=$ac_c_werror_flag
- ac_c_werror_flag=yes
- ac_cv_prog_cc_g=no
- CFLAGS="-g"
- cat >conftest.$ac_ext <<_ACEOF
-/* confdefs.h. */
-_ACEOF
-cat confdefs.h >>conftest.$ac_ext
-cat >>conftest.$ac_ext <<_ACEOF
-/* end confdefs.h. */
-
-int
-main ()
-{
-
- ;
- return 0;
-}
-_ACEOF
-rm -f conftest.$ac_objext
-if { (ac_try="$ac_compile"
-case "(($ac_try" in
- *\"* | *\`* | *\\*) ac_try_echo=\$ac_try;;
- *) ac_try_echo=$ac_try;;
-esac
-eval ac_try_echo="\"\$as_me:$LINENO: $ac_try_echo\""
-$as_echo "$ac_try_echo") >&5
- (eval "$ac_compile") 2>conftest.er1
- ac_status=$?
- grep -v '^ *+' conftest.er1 >conftest.err
- rm -f conftest.er1
- cat conftest.err >&5
- $as_echo "$as_me:$LINENO: \$? = $ac_status" >&5
- (exit $ac_status); } && {
- test -z "$ac_c_werror_flag" ||
- test ! -s conftest.err
- } && test -s conftest.$ac_objext; then
- ac_cv_prog_cc_g=yes
-else
- $as_echo "$as_me: failed program was:" >&5
-sed 's/^/| /' conftest.$ac_ext >&5
-
- CFLAGS=""
- cat >conftest.$ac_ext <<_ACEOF
-/* confdefs.h. */
-_ACEOF
-cat confdefs.h >>conftest.$ac_ext
-cat >>conftest.$ac_ext <<_ACEOF
-/* end confdefs.h. */
-
-int
-main ()
-{
-
- ;
- return 0;
-}
-_ACEOF
-rm -f conftest.$ac_objext
-if { (ac_try="$ac_compile"
-case "(($ac_try" in
- *\"* | *\`* | *\\*) ac_try_echo=\$ac_try;;
- *) ac_try_echo=$ac_try;;
-esac
-eval ac_try_echo="\"\$as_me:$LINENO: $ac_try_echo\""
-$as_echo "$ac_try_echo") >&5
- (eval "$ac_compile") 2>conftest.er1
- ac_status=$?
- grep -v '^ *+' conftest.er1 >conftest.err
- rm -f conftest.er1
- cat conftest.err >&5
- $as_echo "$as_me:$LINENO: \$? = $ac_status" >&5
- (exit $ac_status); } && {
- test -z "$ac_c_werror_flag" ||
- test ! -s conftest.err
- } && test -s conftest.$ac_objext; then
- :
-else
- $as_echo "$as_me: failed program was:" >&5
-sed 's/^/| /' conftest.$ac_ext >&5
-
- ac_c_werror_flag=$ac_save_c_werror_flag
- CFLAGS="-g"
- cat >conftest.$ac_ext <<_ACEOF
-/* confdefs.h. */
-_ACEOF
-cat confdefs.h >>conftest.$ac_ext
-cat >>conftest.$ac_ext <<_ACEOF
-/* end confdefs.h. */
-
-int
-main ()
-{
-
- ;
- return 0;
-}
-_ACEOF
-rm -f conftest.$ac_objext
-if { (ac_try="$ac_compile"
-case "(($ac_try" in
- *\"* | *\`* | *\\*) ac_try_echo=\$ac_try;;
- *) ac_try_echo=$ac_try;;
-esac
-eval ac_try_echo="\"\$as_me:$LINENO: $ac_try_echo\""
-$as_echo "$ac_try_echo") >&5
- (eval "$ac_compile") 2>conftest.er1
- ac_status=$?
- grep -v '^ *+' conftest.er1 >conftest.err
- rm -f conftest.er1
- cat conftest.err >&5
- $as_echo "$as_me:$LINENO: \$? = $ac_status" >&5
- (exit $ac_status); } && {
- test -z "$ac_c_werror_flag" ||
- test ! -s conftest.err
- } && test -s conftest.$ac_objext; then
- ac_cv_prog_cc_g=yes
-else
- $as_echo "$as_me: failed program was:" >&5
-sed 's/^/| /' conftest.$ac_ext >&5
-
-
-fi
-
-rm -f core conftest.err conftest.$ac_objext conftest.$ac_ext
-fi
-
-rm -f core conftest.err conftest.$ac_objext conftest.$ac_ext
-fi
-
-rm -f core conftest.err conftest.$ac_objext conftest.$ac_ext
- ac_c_werror_flag=$ac_save_c_werror_flag
-fi
-{ $as_echo "$as_me:$LINENO: result: $ac_cv_prog_cc_g" >&5
-$as_echo "$ac_cv_prog_cc_g" >&6; }
-if test "$ac_test_CFLAGS" = set; then
- CFLAGS=$ac_save_CFLAGS
-elif test $ac_cv_prog_cc_g = yes; then
- if test "$GCC" = yes; then
- CFLAGS="-g -O2"
- else
- CFLAGS="-g"
- fi
-else
- if test "$GCC" = yes; then
- CFLAGS="-O2"
- else
- CFLAGS=
- fi
-fi
-{ $as_echo "$as_me:$LINENO: checking for $CC option to accept ISO C89" >&5
-$as_echo_n "checking for $CC option to accept ISO C89... " >&6; }
-if test "${ac_cv_prog_cc_c89+set}" = set; then
- $as_echo_n "(cached) " >&6
-else
- ac_cv_prog_cc_c89=no
-ac_save_CC=$CC
-cat >conftest.$ac_ext <<_ACEOF
-/* confdefs.h. */
-_ACEOF
-cat confdefs.h >>conftest.$ac_ext
-cat >>conftest.$ac_ext <<_ACEOF
-/* end confdefs.h. */
-#include <stdarg.h>
-#include <stdio.h>
-#include <sys/types.h>
-#include <sys/stat.h>
-/* Most of the following tests are stolen from RCS 5.7's src/conf.sh. */
-struct buf { int x; };
-FILE * (*rcsopen) (struct buf *, struct stat *, int);
-static char *e (p, i)
- char **p;
- int i;
-{
- return p[i];
-}
-static char *f (char * (*g) (char **, int), char **p, ...)
-{
- char *s;
- va_list v;
- va_start (v,p);
- s = g (p, va_arg (v,int));
- va_end (v);
- return s;
-}
-
-/* OSF 4.0 Compaq cc is some sort of almost-ANSI by default. It has
- function prototypes and stuff, but not '\xHH' hex character constants.
- These don't provoke an error unfortunately, instead are silently treated
- as 'x'. The following induces an error, until -std is added to get
- proper ANSI mode. Curiously '\x00'!='x' always comes out true, for an
- array size at least. It's necessary to write '\x00'==0 to get something
- that's true only with -std. */
-int osf4_cc_array ['\x00' == 0 ? 1 : -1];
-
-/* IBM C 6 for AIX is almost-ANSI by default, but it replaces macro parameters
- inside strings and character constants. */
-#define FOO(x) 'x'
-int xlc6_cc_array[FOO(a) == 'x' ? 1 : -1];
-
-int test (int i, double x);
-struct s1 {int (*f) (int a);};
-struct s2 {int (*f) (double a);};
-int pairnames (int, char **, FILE *(*)(struct buf *, struct stat *, int), int, int);
-int argc;
-char **argv;
-int
-main ()
-{
-return f (e, argv, 0) != argv[0] || f (e, argv, 1) != argv[1];
- ;
- return 0;
-}
-_ACEOF
-for ac_arg in '' -qlanglvl=extc89 -qlanglvl=ansi -std \
- -Ae "-Aa -D_HPUX_SOURCE" "-Xc -D__EXTENSIONS__"
-do
- CC="$ac_save_CC $ac_arg"
- rm -f conftest.$ac_objext
-if { (ac_try="$ac_compile"
-case "(($ac_try" in
- *\"* | *\`* | *\\*) ac_try_echo=\$ac_try;;
- *) ac_try_echo=$ac_try;;
-esac
-eval ac_try_echo="\"\$as_me:$LINENO: $ac_try_echo\""
-$as_echo "$ac_try_echo") >&5
- (eval "$ac_compile") 2>conftest.er1
- ac_status=$?
- grep -v '^ *+' conftest.er1 >conftest.err
- rm -f conftest.er1
- cat conftest.err >&5
- $as_echo "$as_me:$LINENO: \$? = $ac_status" >&5
- (exit $ac_status); } && {
- test -z "$ac_c_werror_flag" ||
- test ! -s conftest.err
- } && test -s conftest.$ac_objext; then
- ac_cv_prog_cc_c89=$ac_arg
-else
- $as_echo "$as_me: failed program was:" >&5
-sed 's/^/| /' conftest.$ac_ext >&5
-
-
-fi
-
-rm -f core conftest.err conftest.$ac_objext
- test "x$ac_cv_prog_cc_c89" != "xno" && break
-done
-rm -f conftest.$ac_ext
-CC=$ac_save_CC
-
-fi
-# AC_CACHE_VAL
-case "x$ac_cv_prog_cc_c89" in
- x)
- { $as_echo "$as_me:$LINENO: result: none needed" >&5
-$as_echo "none needed" >&6; } ;;
- xno)
- { $as_echo "$as_me:$LINENO: result: unsupported" >&5
-$as_echo "unsupported" >&6; } ;;
- *)
- CC="$CC $ac_cv_prog_cc_c89"
- { $as_echo "$as_me:$LINENO: result: $ac_cv_prog_cc_c89" >&5
-$as_echo "$ac_cv_prog_cc_c89" >&6; } ;;
-esac
-
-
-ac_ext=c
-ac_cpp='$CPP $CPPFLAGS'
-ac_compile='$CC -c $CFLAGS $CPPFLAGS conftest.$ac_ext >&5'
-ac_link='$CC -o conftest$ac_exeext $CFLAGS $CPPFLAGS $LDFLAGS conftest.$ac_ext $LIBS >&5'
-ac_compiler_gnu=$ac_cv_c_compiler_gnu
-
-depcc="$CC" am_compiler_list=
-
-{ $as_echo "$as_me:$LINENO: checking dependency style of $depcc" >&5
-$as_echo_n "checking dependency style of $depcc... " >&6; }
-if test "${am_cv_CC_dependencies_compiler_type+set}" = set; then
- $as_echo_n "(cached) " >&6
-else
- if test -z "$AMDEP_TRUE" && test -f "$am_depcomp"; then
- # We make a subdir and do the tests there. Otherwise we can end up
- # making bogus files that we don't know about and never remove. For
- # instance it was reported that on HP-UX the gcc test will end up
- # making a dummy file named `D' -- because `-MD' means `put the output
- # in D'.
- mkdir conftest.dir
- # Copy depcomp to subdir because otherwise we won't find it if we're
- # using a relative directory.
- cp "$am_depcomp" conftest.dir
- cd conftest.dir
- # We will build objects and dependencies in a subdirectory because
- # it helps to detect inapplicable dependency modes. For instance
- # both Tru64's cc and ICC support -MD to output dependencies as a
- # side effect of compilation, but ICC will put the dependencies in
- # the current directory while Tru64 will put them in the object
- # directory.
- mkdir sub
-
- am_cv_CC_dependencies_compiler_type=none
- if test "$am_compiler_list" = ""; then
- am_compiler_list=`sed -n 's/^#*\([a-zA-Z0-9]*\))$/\1/p' < ./depcomp`
- fi
- for depmode in $am_compiler_list; do
- # Setup a source with many dependencies, because some compilers
- # like to wrap large dependency lists on column 80 (with \), and
- # we should not choose a depcomp mode which is confused by this.
- #
- # We need to recreate these files for each test, as the compiler may
- # overwrite some of them when testing with obscure command lines.
- # This happens at least with the AIX C compiler.
- : > sub/conftest.c
- for i in 1 2 3 4 5 6; do
- echo '#include "conftst'$i'.h"' >> sub/conftest.c
- # Using `: > sub/conftst$i.h' creates only sub/conftst1.h with
- # Solaris 8's {/usr,}/bin/sh.
- touch sub/conftst$i.h
- done
- echo "${am__include} ${am__quote}sub/conftest.Po${am__quote}" > confmf
-
- case $depmode in
- nosideeffect)
- # after this tag, mechanisms are not by side-effect, so they'll
- # only be used when explicitly requested
- if test "x$enable_dependency_tracking" = xyes; then
- continue
- else
- break
- fi
- ;;
- none) break ;;
- esac
- # We check with `-c' and `-o' for the sake of the "dashmstdout"
- # mode. It turns out that the SunPro C++ compiler does not properly
- # handle `-M -o', and we need to detect this.
- if depmode=$depmode \
- source=sub/conftest.c object=sub/conftest.${OBJEXT-o} \
- depfile=sub/conftest.Po tmpdepfile=sub/conftest.TPo \
- $SHELL ./depcomp $depcc -c -o sub/conftest.${OBJEXT-o} sub/conftest.c \
- >/dev/null 2>conftest.err &&
- grep sub/conftst1.h sub/conftest.Po > /dev/null 2>&1 &&
- grep sub/conftst6.h sub/conftest.Po > /dev/null 2>&1 &&
- grep sub/conftest.${OBJEXT-o} sub/conftest.Po > /dev/null 2>&1 &&
- ${MAKE-make} -s -f confmf > /dev/null 2>&1; then
- # icc doesn't choke on unknown options, it will just issue warnings
- # or remarks (even with -Werror). So we grep stderr for any message
- # that says an option was ignored or not supported.
- # When given -MP, icc 7.0 and 7.1 complain thusly:
- # icc: Command line warning: ignoring option '-M'; no argument required
- # The diagnosis changed in icc 8.0:
- # icc: Command line remark: option '-MP' not supported
- if (grep 'ignoring option' conftest.err ||
- grep 'not supported' conftest.err) >/dev/null 2>&1; then :; else
- am_cv_CC_dependencies_compiler_type=$depmode
- break
- fi
- fi
- done
-
- cd ..
- rm -rf conftest.dir
-else
- am_cv_CC_dependencies_compiler_type=none
-fi
-
-fi
-{ $as_echo "$as_me:$LINENO: result: $am_cv_CC_dependencies_compiler_type" >&5
-$as_echo "$am_cv_CC_dependencies_compiler_type" >&6; }
-CCDEPMODE=depmode=$am_cv_CC_dependencies_compiler_type
-
- if
- test "x$enable_dependency_tracking" != xno \
- && test "$am_cv_CC_dependencies_compiler_type" = gcc3; then
- am__fastdepCC_TRUE=
- am__fastdepCC_FALSE='#'
-else
- am__fastdepCC_TRUE='#'
- am__fastdepCC_FALSE=
-fi
-
-
- { $as_echo "$as_me:$LINENO: checking for $CC option to accept ISO C99" >&5
-$as_echo_n "checking for $CC option to accept ISO C99... " >&6; }
-if test "${ac_cv_prog_cc_c99+set}" = set; then
- $as_echo_n "(cached) " >&6
-else
- ac_cv_prog_cc_c99=no
-ac_save_CC=$CC
-cat >conftest.$ac_ext <<_ACEOF
-/* confdefs.h. */
-_ACEOF
-cat confdefs.h >>conftest.$ac_ext
-cat >>conftest.$ac_ext <<_ACEOF
-/* end confdefs.h. */
-#include <stdarg.h>
-#include <stdbool.h>
-#include <stdlib.h>
-#include <wchar.h>
-#include <stdio.h>
-
-// Check varargs macros. These examples are taken from C99 6.10.3.5.
-#define debug(...) fprintf (stderr, __VA_ARGS__)
-#define showlist(...) puts (#__VA_ARGS__)
-#define report(test,...) ((test) ? puts (#test) : printf (__VA_ARGS__))
-static void
-test_varargs_macros (void)
-{
- int x = 1234;
- int y = 5678;
- debug ("Flag");
- debug ("X = %d\n", x);
- showlist (The first, second, and third items.);
- report (x>y, "x is %d but y is %d", x, y);
-}
-
-// Check long long types.
-#define BIG64 18446744073709551615ull
-#define BIG32 4294967295ul
-#define BIG_OK (BIG64 / BIG32 == 4294967297ull && BIG64 % BIG32 == 0)
-#if !BIG_OK
- your preprocessor is broken;
-#endif
-#if BIG_OK
-#else
- your preprocessor is broken;
-#endif
-static long long int bignum = -9223372036854775807LL;
-static unsigned long long int ubignum = BIG64;
-
-struct incomplete_array
-{
- int datasize;
- double data[];
-};
-
-struct named_init {
- int number;
- const wchar_t *name;
- double average;
-};
-
-typedef const char *ccp;
-
-static inline int
-test_restrict (ccp restrict text)
-{
- // See if C++-style comments work.
- // Iterate through items via the restricted pointer.
- // Also check for declarations in for loops.
- for (unsigned int i = 0; *(text+i) != '\0'; ++i)
- continue;
- return 0;
-}
-
-// Check varargs and va_copy.
-static void
-test_varargs (const char *format, ...)
-{
- va_list args;
- va_start (args, format);
- va_list args_copy;
- va_copy (args_copy, args);
-
- const char *str;
- int number;
- float fnumber;
-
- while (*format)
- {
- switch (*format++)
- {
- case 's': // string
- str = va_arg (args_copy, const char *);
- break;
- case 'd': // int
- number = va_arg (args_copy, int);
- break;
- case 'f': // float
- fnumber = va_arg (args_copy, double);
- break;
- default:
- break;
- }
- }
- va_end (args_copy);
- va_end (args);
-}
-
-int
-main ()
-{
-
- // Check bool.
- _Bool success = false;
-
- // Check restrict.
- if (test_restrict ("String literal") == 0)
- success = true;
- char *restrict newvar = "Another string";
-
- // Check varargs.
- test_varargs ("s, d' f .", "string", 65, 34.234);
- test_varargs_macros ();
-
- // Check flexible array members.
- struct incomplete_array *ia =
- malloc (sizeof (struct incomplete_array) + (sizeof (double) * 10));
- ia->datasize = 10;
- for (int i = 0; i < ia->datasize; ++i)
- ia->data[i] = i * 1.234;
-
- // Check named initializers.
- struct named_init ni = {
- .number = 34,
- .name = L"Test wide string",
- .average = 543.34343,
- };
-
- ni.number = 58;
-
- int dynamic_array[ni.number];
- dynamic_array[ni.number - 1] = 543;
-
- // work around unused variable warnings
- return (!success || bignum == 0LL || ubignum == 0uLL || newvar[0] == 'x'
- || dynamic_array[ni.number - 1] != 543);
-
- ;
- return 0;
-}
-_ACEOF
-for ac_arg in '' -std=gnu99 -std=c99 -c99 -AC99 -xc99=all -qlanglvl=extc99
-do
- CC="$ac_save_CC $ac_arg"
- rm -f conftest.$ac_objext
-if { (ac_try="$ac_compile"
-case "(($ac_try" in
- *\"* | *\`* | *\\*) ac_try_echo=\$ac_try;;
- *) ac_try_echo=$ac_try;;
-esac
-eval ac_try_echo="\"\$as_me:$LINENO: $ac_try_echo\""
-$as_echo "$ac_try_echo") >&5
- (eval "$ac_compile") 2>conftest.er1
- ac_status=$?
- grep -v '^ *+' conftest.er1 >conftest.err
- rm -f conftest.er1
- cat conftest.err >&5
- $as_echo "$as_me:$LINENO: \$? = $ac_status" >&5
- (exit $ac_status); } && {
- test -z "$ac_c_werror_flag" ||
- test ! -s conftest.err
- } && test -s conftest.$ac_objext; then
- ac_cv_prog_cc_c99=$ac_arg
-else
- $as_echo "$as_me: failed program was:" >&5
-sed 's/^/| /' conftest.$ac_ext >&5
-
-
-fi
-
-rm -f core conftest.err conftest.$ac_objext
- test "x$ac_cv_prog_cc_c99" != "xno" && break
-done
-rm -f conftest.$ac_ext
-CC=$ac_save_CC
-
-fi
-# AC_CACHE_VAL
-case "x$ac_cv_prog_cc_c99" in
- x)
- { $as_echo "$as_me:$LINENO: result: none needed" >&5
-$as_echo "none needed" >&6; } ;;
- xno)
- { $as_echo "$as_me:$LINENO: result: unsupported" >&5
-$as_echo "unsupported" >&6; } ;;
- *)
- CC="$CC $ac_cv_prog_cc_c99"
- { $as_echo "$as_me:$LINENO: result: $ac_cv_prog_cc_c99" >&5
-$as_echo "$ac_cv_prog_cc_c99" >&6; } ;;
-esac
-
-
-
-if test x$ac_cv_prog_cc_c99 = xno ; then
- { { $as_echo "$as_me:$LINENO: error: No C99 compiler was found." >&5
-$as_echo "$as_me: error: No C99 compiler was found." >&2;}
- { (exit 1); exit 1; }; }
-fi
-
-if test "x$CC" != xcc; then
- { $as_echo "$as_me:$LINENO: checking whether $CC and cc understand -c and -o together" >&5
-$as_echo_n "checking whether $CC and cc understand -c and -o together... " >&6; }
-else
- { $as_echo "$as_me:$LINENO: checking whether cc understands -c and -o together" >&5
-$as_echo_n "checking whether cc understands -c and -o together... " >&6; }
-fi
-set dummy $CC; ac_cc=`$as_echo "$2" |
- sed 's/[^a-zA-Z0-9_]/_/g;s/^[0-9]/_/'`
-if { as_var=ac_cv_prog_cc_${ac_cc}_c_o; eval "test \"\${$as_var+set}\" = set"; }; then
- $as_echo_n "(cached) " >&6
-else
- cat >conftest.$ac_ext <<_ACEOF
-/* confdefs.h. */
-_ACEOF
-cat confdefs.h >>conftest.$ac_ext
-cat >>conftest.$ac_ext <<_ACEOF
-/* end confdefs.h. */
-
-int
-main ()
-{
-
- ;
- return 0;
-}
-_ACEOF
-# Make sure it works both with $CC and with simple cc.
-# We do the test twice because some compilers refuse to overwrite an
-# existing .o file with -o, though they will create one.
-ac_try='$CC -c conftest.$ac_ext -o conftest2.$ac_objext >&5'
-rm -f conftest2.*
-if { (case "(($ac_try" in
- *\"* | *\`* | *\\*) ac_try_echo=\$ac_try;;
- *) ac_try_echo=$ac_try;;
-esac
-eval ac_try_echo="\"\$as_me:$LINENO: $ac_try_echo\""
-$as_echo "$ac_try_echo") >&5
- (eval "$ac_try") 2>&5
- ac_status=$?
- $as_echo "$as_me:$LINENO: \$? = $ac_status" >&5
- (exit $ac_status); } &&
- test -f conftest2.$ac_objext && { (case "(($ac_try" in
- *\"* | *\`* | *\\*) ac_try_echo=\$ac_try;;
- *) ac_try_echo=$ac_try;;
-esac
-eval ac_try_echo="\"\$as_me:$LINENO: $ac_try_echo\""
-$as_echo "$ac_try_echo") >&5
- (eval "$ac_try") 2>&5
- ac_status=$?
- $as_echo "$as_me:$LINENO: \$? = $ac_status" >&5
- (exit $ac_status); };
-then
- eval ac_cv_prog_cc_${ac_cc}_c_o=yes
- if test "x$CC" != xcc; then
- # Test first that cc exists at all.
- if { ac_try='cc -c conftest.$ac_ext >&5'
- { (case "(($ac_try" in
- *\"* | *\`* | *\\*) ac_try_echo=\$ac_try;;
- *) ac_try_echo=$ac_try;;
-esac
-eval ac_try_echo="\"\$as_me:$LINENO: $ac_try_echo\""
-$as_echo "$ac_try_echo") >&5
- (eval "$ac_try") 2>&5
- ac_status=$?
- $as_echo "$as_me:$LINENO: \$? = $ac_status" >&5
- (exit $ac_status); }; }; then
- ac_try='cc -c conftest.$ac_ext -o conftest2.$ac_objext >&5'
- rm -f conftest2.*
- if { (case "(($ac_try" in
- *\"* | *\`* | *\\*) ac_try_echo=\$ac_try;;
- *) ac_try_echo=$ac_try;;
-esac
-eval ac_try_echo="\"\$as_me:$LINENO: $ac_try_echo\""
-$as_echo "$ac_try_echo") >&5
- (eval "$ac_try") 2>&5
- ac_status=$?
- $as_echo "$as_me:$LINENO: \$? = $ac_status" >&5
- (exit $ac_status); } &&
- test -f conftest2.$ac_objext && { (case "(($ac_try" in
- *\"* | *\`* | *\\*) ac_try_echo=\$ac_try;;
- *) ac_try_echo=$ac_try;;
-esac
-eval ac_try_echo="\"\$as_me:$LINENO: $ac_try_echo\""
-$as_echo "$ac_try_echo") >&5
- (eval "$ac_try") 2>&5
- ac_status=$?
- $as_echo "$as_me:$LINENO: \$? = $ac_status" >&5
- (exit $ac_status); };
- then
- # cc works too.
- :
- else
- # cc exists but doesn't like -o.
- eval ac_cv_prog_cc_${ac_cc}_c_o=no
- fi
- fi
- fi
-else
- eval ac_cv_prog_cc_${ac_cc}_c_o=no
-fi
-rm -f core conftest*
-
-fi
-if eval test \$ac_cv_prog_cc_${ac_cc}_c_o = yes; then
- { $as_echo "$as_me:$LINENO: result: yes" >&5
-$as_echo "yes" >&6; }
-else
- { $as_echo "$as_me:$LINENO: result: no" >&5
-$as_echo "no" >&6; }
-
-cat >>confdefs.h <<\_ACEOF
-#define NO_MINUS_C_MINUS_O 1
-_ACEOF
-
-fi
-
-# FIXME: we rely on the cache variable name because
-# there is no other way.
-set dummy $CC
-am_cc=`echo $2 | sed 's/[^a-zA-Z0-9_]/_/g;s/^[0-9]/_/'`
-eval am_t=\$ac_cv_prog_cc_${am_cc}_c_o
-if test "$am_t" != yes; then
- # Losing compiler, so override with the script.
- # FIXME: It is wrong to rewrite CC.
- # But if we don't then we get into trouble of one sort or another.
- # A longer-term fix would be to have automake use am__CC in this case,
- # and then we could set am__CC="\$(top_srcdir)/compile \$(CC)"
- CC="$am_aux_dir/compile $CC"
-fi
-
-
-# By default we simply use the C compiler to build assembly code.
-
-test "${CCAS+set}" = set || CCAS=$CC
-test "${CCASFLAGS+set}" = set || CCASFLAGS=$CFLAGS
-
-
-
-depcc="$CCAS" am_compiler_list=
-
-{ $as_echo "$as_me:$LINENO: checking dependency style of $depcc" >&5
-$as_echo_n "checking dependency style of $depcc... " >&6; }
-if test "${am_cv_CCAS_dependencies_compiler_type+set}" = set; then
- $as_echo_n "(cached) " >&6
-else
- if test -z "$AMDEP_TRUE" && test -f "$am_depcomp"; then
- # We make a subdir and do the tests there. Otherwise we can end up
- # making bogus files that we don't know about and never remove. For
- # instance it was reported that on HP-UX the gcc test will end up
- # making a dummy file named `D' -- because `-MD' means `put the output
- # in D'.
- mkdir conftest.dir
- # Copy depcomp to subdir because otherwise we won't find it if we're
- # using a relative directory.
- cp "$am_depcomp" conftest.dir
- cd conftest.dir
- # We will build objects and dependencies in a subdirectory because
- # it helps to detect inapplicable dependency modes. For instance
- # both Tru64's cc and ICC support -MD to output dependencies as a
- # side effect of compilation, but ICC will put the dependencies in
- # the current directory while Tru64 will put them in the object
- # directory.
- mkdir sub
-
- am_cv_CCAS_dependencies_compiler_type=none
- if test "$am_compiler_list" = ""; then
- am_compiler_list=`sed -n 's/^#*\([a-zA-Z0-9]*\))$/\1/p' < ./depcomp`
- fi
- for depmode in $am_compiler_list; do
- # Setup a source with many dependencies, because some compilers
- # like to wrap large dependency lists on column 80 (with \), and
- # we should not choose a depcomp mode which is confused by this.
- #
- # We need to recreate these files for each test, as the compiler may
- # overwrite some of them when testing with obscure command lines.
- # This happens at least with the AIX C compiler.
- : > sub/conftest.c
- for i in 1 2 3 4 5 6; do
- echo '#include "conftst'$i'.h"' >> sub/conftest.c
- # Using `: > sub/conftst$i.h' creates only sub/conftst1.h with
- # Solaris 8's {/usr,}/bin/sh.
- touch sub/conftst$i.h
- done
- echo "${am__include} ${am__quote}sub/conftest.Po${am__quote}" > confmf
-
- case $depmode in
- nosideeffect)
- # after this tag, mechanisms are not by side-effect, so they'll
- # only be used when explicitly requested
- if test "x$enable_dependency_tracking" = xyes; then
- continue
- else
- break
- fi
- ;;
- none) break ;;
- esac
- # We check with `-c' and `-o' for the sake of the "dashmstdout"
- # mode. It turns out that the SunPro C++ compiler does not properly
- # handle `-M -o', and we need to detect this.
- if depmode=$depmode \
- source=sub/conftest.c object=sub/conftest.${OBJEXT-o} \
- depfile=sub/conftest.Po tmpdepfile=sub/conftest.TPo \
- $SHELL ./depcomp $depcc -c -o sub/conftest.${OBJEXT-o} sub/conftest.c \
- >/dev/null 2>conftest.err &&
- grep sub/conftst1.h sub/conftest.Po > /dev/null 2>&1 &&
- grep sub/conftst6.h sub/conftest.Po > /dev/null 2>&1 &&
- grep sub/conftest.${OBJEXT-o} sub/conftest.Po > /dev/null 2>&1 &&
- ${MAKE-make} -s -f confmf > /dev/null 2>&1; then
- # icc doesn't choke on unknown options, it will just issue warnings
- # or remarks (even with -Werror). So we grep stderr for any message
- # that says an option was ignored or not supported.
- # When given -MP, icc 7.0 and 7.1 complain thusly:
- # icc: Command line warning: ignoring option '-M'; no argument required
- # The diagnosis changed in icc 8.0:
- # icc: Command line remark: option '-MP' not supported
- if (grep 'ignoring option' conftest.err ||
- grep 'not supported' conftest.err) >/dev/null 2>&1; then :; else
- am_cv_CCAS_dependencies_compiler_type=$depmode
- break
- fi
- fi
- done
-
- cd ..
- rm -rf conftest.dir
-else
- am_cv_CCAS_dependencies_compiler_type=none
-fi
-
-fi
-{ $as_echo "$as_me:$LINENO: result: $am_cv_CCAS_dependencies_compiler_type" >&5
-$as_echo "$am_cv_CCAS_dependencies_compiler_type" >&6; }
-CCASDEPMODE=depmode=$am_cv_CCAS_dependencies_compiler_type
-
- if
- test "x$enable_dependency_tracking" != xno \
- && test "$am_cv_CCAS_dependencies_compiler_type" = gcc3; then
- am__fastdepCCAS_TRUE=
- am__fastdepCCAS_FALSE='#'
-else
- am__fastdepCCAS_TRUE='#'
- am__fastdepCCAS_FALSE=
-fi
-
-
-
-ac_ext=c
-ac_cpp='$CPP $CPPFLAGS'
-ac_compile='$CC -c $CFLAGS $CPPFLAGS conftest.$ac_ext >&5'
-ac_link='$CC -o conftest$ac_exeext $CFLAGS $CPPFLAGS $LDFLAGS conftest.$ac_ext $LIBS >&5'
-ac_compiler_gnu=$ac_cv_c_compiler_gnu
-{ $as_echo "$as_me:$LINENO: checking how to run the C preprocessor" >&5
-$as_echo_n "checking how to run the C preprocessor... " >&6; }
-# On Suns, sometimes $CPP names a directory.
-if test -n "$CPP" && test -d "$CPP"; then
- CPP=
-fi
-if test -z "$CPP"; then
- if test "${ac_cv_prog_CPP+set}" = set; then
- $as_echo_n "(cached) " >&6
-else
- # Double quotes because CPP needs to be expanded
- for CPP in "$CC -E" "$CC -E -traditional-cpp" "/lib/cpp"
- do
- ac_preproc_ok=false
-for ac_c_preproc_warn_flag in '' yes
-do
- # Use a header file that comes with gcc, so configuring glibc
- # with a fresh cross-compiler works.
- # Prefer <limits.h> to <assert.h> if __STDC__ is defined, since
- # <limits.h> exists even on freestanding compilers.
- # On the NeXT, cc -E runs the code through the compiler's parser,
- # not just through cpp. "Syntax error" is here to catch this case.
- cat >conftest.$ac_ext <<_ACEOF
-/* confdefs.h. */
-_ACEOF
-cat confdefs.h >>conftest.$ac_ext
-cat >>conftest.$ac_ext <<_ACEOF
-/* end confdefs.h. */
-#ifdef __STDC__
-# include <limits.h>
-#else
-# include <assert.h>
-#endif
- Syntax error
-_ACEOF
-if { (ac_try="$ac_cpp conftest.$ac_ext"
-case "(($ac_try" in
- *\"* | *\`* | *\\*) ac_try_echo=\$ac_try;;
- *) ac_try_echo=$ac_try;;
-esac
-eval ac_try_echo="\"\$as_me:$LINENO: $ac_try_echo\""
-$as_echo "$ac_try_echo") >&5
- (eval "$ac_cpp conftest.$ac_ext") 2>conftest.er1
- ac_status=$?
- grep -v '^ *+' conftest.er1 >conftest.err
- rm -f conftest.er1
- cat conftest.err >&5
- $as_echo "$as_me:$LINENO: \$? = $ac_status" >&5
- (exit $ac_status); } >/dev/null && {
- test -z "$ac_c_preproc_warn_flag$ac_c_werror_flag" ||
- test ! -s conftest.err
- }; then
- :
-else
- $as_echo "$as_me: failed program was:" >&5
-sed 's/^/| /' conftest.$ac_ext >&5
-
- # Broken: fails on valid input.
-continue
-fi
-
-rm -f conftest.err conftest.$ac_ext
-
- # OK, works on sane cases. Now check whether nonexistent headers
- # can be detected and how.
- cat >conftest.$ac_ext <<_ACEOF
-/* confdefs.h. */
-_ACEOF
-cat confdefs.h >>conftest.$ac_ext
-cat >>conftest.$ac_ext <<_ACEOF
-/* end confdefs.h. */
-#include <ac_nonexistent.h>
-_ACEOF
-if { (ac_try="$ac_cpp conftest.$ac_ext"
-case "(($ac_try" in
- *\"* | *\`* | *\\*) ac_try_echo=\$ac_try;;
- *) ac_try_echo=$ac_try;;
-esac
-eval ac_try_echo="\"\$as_me:$LINENO: $ac_try_echo\""
-$as_echo "$ac_try_echo") >&5
- (eval "$ac_cpp conftest.$ac_ext") 2>conftest.er1
- ac_status=$?
- grep -v '^ *+' conftest.er1 >conftest.err
- rm -f conftest.er1
- cat conftest.err >&5
- $as_echo "$as_me:$LINENO: \$? = $ac_status" >&5
- (exit $ac_status); } >/dev/null && {
- test -z "$ac_c_preproc_warn_flag$ac_c_werror_flag" ||
- test ! -s conftest.err
- }; then
- # Broken: success on invalid input.
-continue
-else
- $as_echo "$as_me: failed program was:" >&5
-sed 's/^/| /' conftest.$ac_ext >&5
-
- # Passes both tests.
-ac_preproc_ok=:
-break
-fi
-
-rm -f conftest.err conftest.$ac_ext
-
-done
-# Because of `break', _AC_PREPROC_IFELSE's cleaning code was skipped.
-rm -f conftest.err conftest.$ac_ext
-if $ac_preproc_ok; then
- break
-fi
-
- done
- ac_cv_prog_CPP=$CPP
-
-fi
- CPP=$ac_cv_prog_CPP
-else
- ac_cv_prog_CPP=$CPP
-fi
-{ $as_echo "$as_me:$LINENO: result: $CPP" >&5
-$as_echo "$CPP" >&6; }
-ac_preproc_ok=false
-for ac_c_preproc_warn_flag in '' yes
-do
- # Use a header file that comes with gcc, so configuring glibc
- # with a fresh cross-compiler works.
- # Prefer <limits.h> to <assert.h> if __STDC__ is defined, since
- # <limits.h> exists even on freestanding compilers.
- # On the NeXT, cc -E runs the code through the compiler's parser,
- # not just through cpp. "Syntax error" is here to catch this case.
- cat >conftest.$ac_ext <<_ACEOF
-/* confdefs.h. */
-_ACEOF
-cat confdefs.h >>conftest.$ac_ext
-cat >>conftest.$ac_ext <<_ACEOF
-/* end confdefs.h. */
-#ifdef __STDC__
-# include <limits.h>
-#else
-# include <assert.h>
-#endif
- Syntax error
-_ACEOF
-if { (ac_try="$ac_cpp conftest.$ac_ext"
-case "(($ac_try" in
- *\"* | *\`* | *\\*) ac_try_echo=\$ac_try;;
- *) ac_try_echo=$ac_try;;
-esac
-eval ac_try_echo="\"\$as_me:$LINENO: $ac_try_echo\""
-$as_echo "$ac_try_echo") >&5
- (eval "$ac_cpp conftest.$ac_ext") 2>conftest.er1
- ac_status=$?
- grep -v '^ *+' conftest.er1 >conftest.err
- rm -f conftest.er1
- cat conftest.err >&5
- $as_echo "$as_me:$LINENO: \$? = $ac_status" >&5
- (exit $ac_status); } >/dev/null && {
- test -z "$ac_c_preproc_warn_flag$ac_c_werror_flag" ||
- test ! -s conftest.err
- }; then
- :
-else
- $as_echo "$as_me: failed program was:" >&5
-sed 's/^/| /' conftest.$ac_ext >&5
-
- # Broken: fails on valid input.
-continue
-fi
-
-rm -f conftest.err conftest.$ac_ext
-
- # OK, works on sane cases. Now check whether nonexistent headers
- # can be detected and how.
- cat >conftest.$ac_ext <<_ACEOF
-/* confdefs.h. */
-_ACEOF
-cat confdefs.h >>conftest.$ac_ext
-cat >>conftest.$ac_ext <<_ACEOF
-/* end confdefs.h. */
-#include <ac_nonexistent.h>
-_ACEOF
-if { (ac_try="$ac_cpp conftest.$ac_ext"
-case "(($ac_try" in
- *\"* | *\`* | *\\*) ac_try_echo=\$ac_try;;
- *) ac_try_echo=$ac_try;;
-esac
-eval ac_try_echo="\"\$as_me:$LINENO: $ac_try_echo\""
-$as_echo "$ac_try_echo") >&5
- (eval "$ac_cpp conftest.$ac_ext") 2>conftest.er1
- ac_status=$?
- grep -v '^ *+' conftest.er1 >conftest.err
- rm -f conftest.er1
- cat conftest.err >&5
- $as_echo "$as_me:$LINENO: \$? = $ac_status" >&5
- (exit $ac_status); } >/dev/null && {
- test -z "$ac_c_preproc_warn_flag$ac_c_werror_flag" ||
- test ! -s conftest.err
- }; then
- # Broken: success on invalid input.
-continue
-else
- $as_echo "$as_me: failed program was:" >&5
-sed 's/^/| /' conftest.$ac_ext >&5
-
- # Passes both tests.
-ac_preproc_ok=:
-break
-fi
-
-rm -f conftest.err conftest.$ac_ext
-
-done
-# Because of `break', _AC_PREPROC_IFELSE's cleaning code was skipped.
-rm -f conftest.err conftest.$ac_ext
-if $ac_preproc_ok; then
- :
-else
- { { $as_echo "$as_me:$LINENO: error: C preprocessor \"$CPP\" fails sanity check
-See \`config.log' for more details." >&5
-$as_echo "$as_me: error: C preprocessor \"$CPP\" fails sanity check
-See \`config.log' for more details." >&2;}
- { (exit 1); exit 1; }; }
-fi
-
-ac_ext=c
-ac_cpp='$CPP $CPPFLAGS'
-ac_compile='$CC -c $CFLAGS $CPPFLAGS conftest.$ac_ext >&5'
-ac_link='$CC -o conftest$ac_exeext $CFLAGS $CPPFLAGS $LDFLAGS conftest.$ac_ext $LIBS >&5'
-ac_compiler_gnu=$ac_cv_c_compiler_gnu
-
-
-{ $as_echo "$as_me:$LINENO: checking for grep that handles long lines and -e" >&5
-$as_echo_n "checking for grep that handles long lines and -e... " >&6; }
-if test "${ac_cv_path_GREP+set}" = set; then
- $as_echo_n "(cached) " >&6
-else
- if test -z "$GREP"; then
- ac_path_GREP_found=false
- # Loop through the user's path and test for each of PROGNAME-LIST
- as_save_IFS=$IFS; IFS=$PATH_SEPARATOR
-for as_dir in $PATH$PATH_SEPARATOR/usr/xpg4/bin
-do
- IFS=$as_save_IFS
- test -z "$as_dir" && as_dir=.
- for ac_prog in grep ggrep; do
- for ac_exec_ext in '' $ac_executable_extensions; do
- ac_path_GREP="$as_dir/$ac_prog$ac_exec_ext"
- { test -f "$ac_path_GREP" && $as_test_x "$ac_path_GREP"; } || continue
-# Check for GNU ac_path_GREP and select it if it is found.
- # Check for GNU $ac_path_GREP
-case `"$ac_path_GREP" --version 2>&1` in
-*GNU*)
- ac_cv_path_GREP="$ac_path_GREP" ac_path_GREP_found=:;;
-*)
- ac_count=0
- $as_echo_n 0123456789 >"conftest.in"
- while :
- do
- cat "conftest.in" "conftest.in" >"conftest.tmp"
- mv "conftest.tmp" "conftest.in"
- cp "conftest.in" "conftest.nl"
- $as_echo 'GREP' >> "conftest.nl"
- "$ac_path_GREP" -e 'GREP$' -e '-(cannot match)-' < "conftest.nl" >"conftest.out" 2>/dev/null || break
- diff "conftest.out" "conftest.nl" >/dev/null 2>&1 || break
- ac_count=`expr $ac_count + 1`
- if test $ac_count -gt ${ac_path_GREP_max-0}; then
- # Best one so far, save it but keep looking for a better one
- ac_cv_path_GREP="$ac_path_GREP"
- ac_path_GREP_max=$ac_count
- fi
- # 10*(2^10) chars as input seems more than enough
- test $ac_count -gt 10 && break
- done
- rm -f conftest.in conftest.tmp conftest.nl conftest.out;;
-esac
-
- $ac_path_GREP_found && break 3
- done
- done
-done
-IFS=$as_save_IFS
- if test -z "$ac_cv_path_GREP"; then
- { { $as_echo "$as_me:$LINENO: error: no acceptable grep could be found in $PATH$PATH_SEPARATOR/usr/xpg4/bin" >&5
-$as_echo "$as_me: error: no acceptable grep could be found in $PATH$PATH_SEPARATOR/usr/xpg4/bin" >&2;}
- { (exit 1); exit 1; }; }
- fi
-else
- ac_cv_path_GREP=$GREP
-fi
-
-fi
-{ $as_echo "$as_me:$LINENO: result: $ac_cv_path_GREP" >&5
-$as_echo "$ac_cv_path_GREP" >&6; }
- GREP="$ac_cv_path_GREP"
-
-
-{ $as_echo "$as_me:$LINENO: checking for egrep" >&5
-$as_echo_n "checking for egrep... " >&6; }
-if test "${ac_cv_path_EGREP+set}" = set; then
- $as_echo_n "(cached) " >&6
-else
- if echo a | $GREP -E '(a|b)' >/dev/null 2>&1
- then ac_cv_path_EGREP="$GREP -E"
- else
- if test -z "$EGREP"; then
- ac_path_EGREP_found=false
- # Loop through the user's path and test for each of PROGNAME-LIST
- as_save_IFS=$IFS; IFS=$PATH_SEPARATOR
-for as_dir in $PATH$PATH_SEPARATOR/usr/xpg4/bin
-do
- IFS=$as_save_IFS
- test -z "$as_dir" && as_dir=.
- for ac_prog in egrep; do
- for ac_exec_ext in '' $ac_executable_extensions; do
- ac_path_EGREP="$as_dir/$ac_prog$ac_exec_ext"
- { test -f "$ac_path_EGREP" && $as_test_x "$ac_path_EGREP"; } || continue
-# Check for GNU ac_path_EGREP and select it if it is found.
- # Check for GNU $ac_path_EGREP
-case `"$ac_path_EGREP" --version 2>&1` in
-*GNU*)
- ac_cv_path_EGREP="$ac_path_EGREP" ac_path_EGREP_found=:;;
-*)
- ac_count=0
- $as_echo_n 0123456789 >"conftest.in"
- while :
- do
- cat "conftest.in" "conftest.in" >"conftest.tmp"
- mv "conftest.tmp" "conftest.in"
- cp "conftest.in" "conftest.nl"
- $as_echo 'EGREP' >> "conftest.nl"
- "$ac_path_EGREP" 'EGREP$' < "conftest.nl" >"conftest.out" 2>/dev/null || break
- diff "conftest.out" "conftest.nl" >/dev/null 2>&1 || break
- ac_count=`expr $ac_count + 1`
- if test $ac_count -gt ${ac_path_EGREP_max-0}; then
- # Best one so far, save it but keep looking for a better one
- ac_cv_path_EGREP="$ac_path_EGREP"
- ac_path_EGREP_max=$ac_count
- fi
- # 10*(2^10) chars as input seems more than enough
- test $ac_count -gt 10 && break
- done
- rm -f conftest.in conftest.tmp conftest.nl conftest.out;;
-esac
-
- $ac_path_EGREP_found && break 3
- done
- done
-done
-IFS=$as_save_IFS
- if test -z "$ac_cv_path_EGREP"; then
- { { $as_echo "$as_me:$LINENO: error: no acceptable egrep could be found in $PATH$PATH_SEPARATOR/usr/xpg4/bin" >&5
-$as_echo "$as_me: error: no acceptable egrep could be found in $PATH$PATH_SEPARATOR/usr/xpg4/bin" >&2;}
- { (exit 1); exit 1; }; }
- fi
-else
- ac_cv_path_EGREP=$EGREP
-fi
-
- fi
-fi
-{ $as_echo "$as_me:$LINENO: result: $ac_cv_path_EGREP" >&5
-$as_echo "$ac_cv_path_EGREP" >&6; }
- EGREP="$ac_cv_path_EGREP"
-
-
-{ $as_echo "$as_me:$LINENO: checking for ANSI C header files" >&5
-$as_echo_n "checking for ANSI C header files... " >&6; }
-if test "${ac_cv_header_stdc+set}" = set; then
- $as_echo_n "(cached) " >&6
-else
- cat >conftest.$ac_ext <<_ACEOF
-/* confdefs.h. */
-_ACEOF
-cat confdefs.h >>conftest.$ac_ext
-cat >>conftest.$ac_ext <<_ACEOF
-/* end confdefs.h. */
-#include <stdlib.h>
-#include <stdarg.h>
-#include <string.h>
-#include <float.h>
-
-int
-main ()
-{
-
- ;
- return 0;
-}
-_ACEOF
-rm -f conftest.$ac_objext
-if { (ac_try="$ac_compile"
-case "(($ac_try" in
- *\"* | *\`* | *\\*) ac_try_echo=\$ac_try;;
- *) ac_try_echo=$ac_try;;
-esac
-eval ac_try_echo="\"\$as_me:$LINENO: $ac_try_echo\""
-$as_echo "$ac_try_echo") >&5
- (eval "$ac_compile") 2>conftest.er1
- ac_status=$?
- grep -v '^ *+' conftest.er1 >conftest.err
- rm -f conftest.er1
- cat conftest.err >&5
- $as_echo "$as_me:$LINENO: \$? = $ac_status" >&5
- (exit $ac_status); } && {
- test -z "$ac_c_werror_flag" ||
- test ! -s conftest.err
- } && test -s conftest.$ac_objext; then
- ac_cv_header_stdc=yes
-else
- $as_echo "$as_me: failed program was:" >&5
-sed 's/^/| /' conftest.$ac_ext >&5
-
- ac_cv_header_stdc=no
-fi
-
-rm -f core conftest.err conftest.$ac_objext conftest.$ac_ext
-
-if test $ac_cv_header_stdc = yes; then
- # SunOS 4.x string.h does not declare mem*, contrary to ANSI.
- cat >conftest.$ac_ext <<_ACEOF
-/* confdefs.h. */
-_ACEOF
-cat confdefs.h >>conftest.$ac_ext
-cat >>conftest.$ac_ext <<_ACEOF
-/* end confdefs.h. */
-#include <string.h>
-
-_ACEOF
-if (eval "$ac_cpp conftest.$ac_ext") 2>&5 |
- $EGREP "memchr" >/dev/null 2>&1; then
- :
-else
- ac_cv_header_stdc=no
-fi
-rm -f conftest*
-
-fi
-
-if test $ac_cv_header_stdc = yes; then
- # ISC 2.0.2 stdlib.h does not declare free, contrary to ANSI.
- cat >conftest.$ac_ext <<_ACEOF
-/* confdefs.h. */
-_ACEOF
-cat confdefs.h >>conftest.$ac_ext
-cat >>conftest.$ac_ext <<_ACEOF
-/* end confdefs.h. */
-#include <stdlib.h>
-
-_ACEOF
-if (eval "$ac_cpp conftest.$ac_ext") 2>&5 |
- $EGREP "free" >/dev/null 2>&1; then
- :
-else
- ac_cv_header_stdc=no
-fi
-rm -f conftest*
-
-fi
-
-if test $ac_cv_header_stdc = yes; then
- # /bin/cc in Irix-4.0.5 gets non-ANSI ctype macros unless using -ansi.
- if test "$cross_compiling" = yes; then
- :
-else
- cat >conftest.$ac_ext <<_ACEOF
-/* confdefs.h. */
-_ACEOF
-cat confdefs.h >>conftest.$ac_ext
-cat >>conftest.$ac_ext <<_ACEOF
-/* end confdefs.h. */
-#include <ctype.h>
-#include <stdlib.h>
-#if ((' ' & 0x0FF) == 0x020)
-# define ISLOWER(c) ('a' <= (c) && (c) <= 'z')
-# define TOUPPER(c) (ISLOWER(c) ? 'A' + ((c) - 'a') : (c))
-#else
-# define ISLOWER(c) \
- (('a' <= (c) && (c) <= 'i') \
- || ('j' <= (c) && (c) <= 'r') \
- || ('s' <= (c) && (c) <= 'z'))
-# define TOUPPER(c) (ISLOWER(c) ? ((c) | 0x40) : (c))
-#endif
-
-#define XOR(e, f) (((e) && !(f)) || (!(e) && (f)))
-int
-main ()
-{
- int i;
- for (i = 0; i < 256; i++)
- if (XOR (islower (i), ISLOWER (i))
- || toupper (i) != TOUPPER (i))
- return 2;
- return 0;
-}
-_ACEOF
-rm -f conftest$ac_exeext
-if { (ac_try="$ac_link"
-case "(($ac_try" in
- *\"* | *\`* | *\\*) ac_try_echo=\$ac_try;;
- *) ac_try_echo=$ac_try;;
-esac
-eval ac_try_echo="\"\$as_me:$LINENO: $ac_try_echo\""
-$as_echo "$ac_try_echo") >&5
- (eval "$ac_link") 2>&5
- ac_status=$?
- $as_echo "$as_me:$LINENO: \$? = $ac_status" >&5
- (exit $ac_status); } && { ac_try='./conftest$ac_exeext'
- { (case "(($ac_try" in
- *\"* | *\`* | *\\*) ac_try_echo=\$ac_try;;
- *) ac_try_echo=$ac_try;;
-esac
-eval ac_try_echo="\"\$as_me:$LINENO: $ac_try_echo\""
-$as_echo "$ac_try_echo") >&5
- (eval "$ac_try") 2>&5
- ac_status=$?
- $as_echo "$as_me:$LINENO: \$? = $ac_status" >&5
- (exit $ac_status); }; }; then
- :
-else
- $as_echo "$as_me: program exited with status $ac_status" >&5
-$as_echo "$as_me: failed program was:" >&5
-sed 's/^/| /' conftest.$ac_ext >&5
-
-( exit $ac_status )
-ac_cv_header_stdc=no
-fi
-rm -rf conftest.dSYM
-rm -f core *.core core.conftest.* gmon.out bb.out conftest$ac_exeext conftest.$ac_objext conftest.$ac_ext
-fi
-
-
-fi
-fi
-{ $as_echo "$as_me:$LINENO: result: $ac_cv_header_stdc" >&5
-$as_echo "$ac_cv_header_stdc" >&6; }
-if test $ac_cv_header_stdc = yes; then
-
-cat >>confdefs.h <<\_ACEOF
-#define STDC_HEADERS 1
-_ACEOF
-
-fi
-
-# On IRIX 5.3, sys/types and inttypes.h are conflicting.
-
-
-
-
-
-
-
-
-
-for ac_header in sys/types.h sys/stat.h stdlib.h string.h memory.h strings.h \
- inttypes.h stdint.h unistd.h
-do
-as_ac_Header=`$as_echo "ac_cv_header_$ac_header" | $as_tr_sh`
-{ $as_echo "$as_me:$LINENO: checking for $ac_header" >&5
-$as_echo_n "checking for $ac_header... " >&6; }
-if { as_var=$as_ac_Header; eval "test \"\${$as_var+set}\" = set"; }; then
- $as_echo_n "(cached) " >&6
-else
- cat >conftest.$ac_ext <<_ACEOF
-/* confdefs.h. */
-_ACEOF
-cat confdefs.h >>conftest.$ac_ext
-cat >>conftest.$ac_ext <<_ACEOF
-/* end confdefs.h. */
-$ac_includes_default
-
-#include <$ac_header>
-_ACEOF
-rm -f conftest.$ac_objext
-if { (ac_try="$ac_compile"
-case "(($ac_try" in
- *\"* | *\`* | *\\*) ac_try_echo=\$ac_try;;
- *) ac_try_echo=$ac_try;;
-esac
-eval ac_try_echo="\"\$as_me:$LINENO: $ac_try_echo\""
-$as_echo "$ac_try_echo") >&5
- (eval "$ac_compile") 2>conftest.er1
- ac_status=$?
- grep -v '^ *+' conftest.er1 >conftest.err
- rm -f conftest.er1
- cat conftest.err >&5
- $as_echo "$as_me:$LINENO: \$? = $ac_status" >&5
- (exit $ac_status); } && {
- test -z "$ac_c_werror_flag" ||
- test ! -s conftest.err
- } && test -s conftest.$ac_objext; then
- eval "$as_ac_Header=yes"
-else
- $as_echo "$as_me: failed program was:" >&5
-sed 's/^/| /' conftest.$ac_ext >&5
-
- eval "$as_ac_Header=no"
-fi
-
-rm -f core conftest.err conftest.$ac_objext conftest.$ac_ext
-fi
-ac_res=`eval 'as_val=${'$as_ac_Header'}
- $as_echo "$as_val"'`
- { $as_echo "$as_me:$LINENO: result: $ac_res" >&5
-$as_echo "$ac_res" >&6; }
-if test `eval 'as_val=${'$as_ac_Header'}
- $as_echo "$as_val"'` = yes; then
- cat >>confdefs.h <<_ACEOF
-#define `$as_echo "HAVE_$ac_header" | $as_tr_cpp` 1
-_ACEOF
-
-fi
-
-done
-
-
-
- if test "${ac_cv_header_minix_config_h+set}" = set; then
- { $as_echo "$as_me:$LINENO: checking for minix/config.h" >&5
-$as_echo_n "checking for minix/config.h... " >&6; }
-if test "${ac_cv_header_minix_config_h+set}" = set; then
- $as_echo_n "(cached) " >&6
-fi
-{ $as_echo "$as_me:$LINENO: result: $ac_cv_header_minix_config_h" >&5
-$as_echo "$ac_cv_header_minix_config_h" >&6; }
-else
- # Is the header compilable?
-{ $as_echo "$as_me:$LINENO: checking minix/config.h usability" >&5
-$as_echo_n "checking minix/config.h usability... " >&6; }
-cat >conftest.$ac_ext <<_ACEOF
-/* confdefs.h. */
-_ACEOF
-cat confdefs.h >>conftest.$ac_ext
-cat >>conftest.$ac_ext <<_ACEOF
-/* end confdefs.h. */
-$ac_includes_default
-#include <minix/config.h>
-_ACEOF
-rm -f conftest.$ac_objext
-if { (ac_try="$ac_compile"
-case "(($ac_try" in
- *\"* | *\`* | *\\*) ac_try_echo=\$ac_try;;
- *) ac_try_echo=$ac_try;;
-esac
-eval ac_try_echo="\"\$as_me:$LINENO: $ac_try_echo\""
-$as_echo "$ac_try_echo") >&5
- (eval "$ac_compile") 2>conftest.er1
- ac_status=$?
- grep -v '^ *+' conftest.er1 >conftest.err
- rm -f conftest.er1
- cat conftest.err >&5
- $as_echo "$as_me:$LINENO: \$? = $ac_status" >&5
- (exit $ac_status); } && {
- test -z "$ac_c_werror_flag" ||
- test ! -s conftest.err
- } && test -s conftest.$ac_objext; then
- ac_header_compiler=yes
-else
- $as_echo "$as_me: failed program was:" >&5
-sed 's/^/| /' conftest.$ac_ext >&5
-
- ac_header_compiler=no
-fi
-
-rm -f core conftest.err conftest.$ac_objext conftest.$ac_ext
-{ $as_echo "$as_me:$LINENO: result: $ac_header_compiler" >&5
-$as_echo "$ac_header_compiler" >&6; }
-
-# Is the header present?
-{ $as_echo "$as_me:$LINENO: checking minix/config.h presence" >&5
-$as_echo_n "checking minix/config.h presence... " >&6; }
-cat >conftest.$ac_ext <<_ACEOF
-/* confdefs.h. */
-_ACEOF
-cat confdefs.h >>conftest.$ac_ext
-cat >>conftest.$ac_ext <<_ACEOF
-/* end confdefs.h. */
-#include <minix/config.h>
-_ACEOF
-if { (ac_try="$ac_cpp conftest.$ac_ext"
-case "(($ac_try" in
- *\"* | *\`* | *\\*) ac_try_echo=\$ac_try;;
- *) ac_try_echo=$ac_try;;
-esac
-eval ac_try_echo="\"\$as_me:$LINENO: $ac_try_echo\""
-$as_echo "$ac_try_echo") >&5
- (eval "$ac_cpp conftest.$ac_ext") 2>conftest.er1
- ac_status=$?
- grep -v '^ *+' conftest.er1 >conftest.err
- rm -f conftest.er1
- cat conftest.err >&5
- $as_echo "$as_me:$LINENO: \$? = $ac_status" >&5
- (exit $ac_status); } >/dev/null && {
- test -z "$ac_c_preproc_warn_flag$ac_c_werror_flag" ||
- test ! -s conftest.err
- }; then
- ac_header_preproc=yes
-else
- $as_echo "$as_me: failed program was:" >&5
-sed 's/^/| /' conftest.$ac_ext >&5
-
- ac_header_preproc=no
-fi
-
-rm -f conftest.err conftest.$ac_ext
-{ $as_echo "$as_me:$LINENO: result: $ac_header_preproc" >&5
-$as_echo "$ac_header_preproc" >&6; }
-
-# So? What about this header?
-case $ac_header_compiler:$ac_header_preproc:$ac_c_preproc_warn_flag in
- yes:no: )
- { $as_echo "$as_me:$LINENO: WARNING: minix/config.h: accepted by the compiler, rejected by the preprocessor!" >&5
-$as_echo "$as_me: WARNING: minix/config.h: accepted by the compiler, rejected by the preprocessor!" >&2;}
- { $as_echo "$as_me:$LINENO: WARNING: minix/config.h: proceeding with the compiler's result" >&5
-$as_echo "$as_me: WARNING: minix/config.h: proceeding with the compiler's result" >&2;}
- ac_header_preproc=yes
- ;;
- no:yes:* )
- { $as_echo "$as_me:$LINENO: WARNING: minix/config.h: present but cannot be compiled" >&5
-$as_echo "$as_me: WARNING: minix/config.h: present but cannot be compiled" >&2;}
- { $as_echo "$as_me:$LINENO: WARNING: minix/config.h: check for missing prerequisite headers?" >&5
-$as_echo "$as_me: WARNING: minix/config.h: check for missing prerequisite headers?" >&2;}
- { $as_echo "$as_me:$LINENO: WARNING: minix/config.h: see the Autoconf documentation" >&5
-$as_echo "$as_me: WARNING: minix/config.h: see the Autoconf documentation" >&2;}
- { $as_echo "$as_me:$LINENO: WARNING: minix/config.h: section \"Present But Cannot Be Compiled\"" >&5
-$as_echo "$as_me: WARNING: minix/config.h: section \"Present But Cannot Be Compiled\"" >&2;}
- { $as_echo "$as_me:$LINENO: WARNING: minix/config.h: proceeding with the preprocessor's result" >&5
-$as_echo "$as_me: WARNING: minix/config.h: proceeding with the preprocessor's result" >&2;}
- { $as_echo "$as_me:$LINENO: WARNING: minix/config.h: in the future, the compiler will take precedence" >&5
-$as_echo "$as_me: WARNING: minix/config.h: in the future, the compiler will take precedence" >&2;}
- ( cat <<\_ASBOX
-## --------------------------------------- ##
-## Report this to lasse.collin@tukaani.org ##
-## --------------------------------------- ##
-_ASBOX
- ) | sed "s/^/$as_me: WARNING: /" >&2
- ;;
-esac
-{ $as_echo "$as_me:$LINENO: checking for minix/config.h" >&5
-$as_echo_n "checking for minix/config.h... " >&6; }
-if test "${ac_cv_header_minix_config_h+set}" = set; then
- $as_echo_n "(cached) " >&6
-else
- ac_cv_header_minix_config_h=$ac_header_preproc
-fi
-{ $as_echo "$as_me:$LINENO: result: $ac_cv_header_minix_config_h" >&5
-$as_echo "$ac_cv_header_minix_config_h" >&6; }
-
-fi
-if test $ac_cv_header_minix_config_h = yes; then
- MINIX=yes
-else
- MINIX=
-fi
-
-
- if test "$MINIX" = yes; then
-
-cat >>confdefs.h <<\_ACEOF
-#define _POSIX_SOURCE 1
-_ACEOF
-
-
-cat >>confdefs.h <<\_ACEOF
-#define _POSIX_1_SOURCE 2
-_ACEOF
-
-
-cat >>confdefs.h <<\_ACEOF
-#define _MINIX 1
-_ACEOF
-
- fi
-
-
-
- { $as_echo "$as_me:$LINENO: checking whether it is safe to define __EXTENSIONS__" >&5
-$as_echo_n "checking whether it is safe to define __EXTENSIONS__... " >&6; }
-if test "${ac_cv_safe_to_define___extensions__+set}" = set; then
- $as_echo_n "(cached) " >&6
-else
- cat >conftest.$ac_ext <<_ACEOF
-/* confdefs.h. */
-_ACEOF
-cat confdefs.h >>conftest.$ac_ext
-cat >>conftest.$ac_ext <<_ACEOF
-/* end confdefs.h. */
-
-# define __EXTENSIONS__ 1
- $ac_includes_default
-int
-main ()
-{
-
- ;
- return 0;
-}
-_ACEOF
-rm -f conftest.$ac_objext
-if { (ac_try="$ac_compile"
-case "(($ac_try" in
- *\"* | *\`* | *\\*) ac_try_echo=\$ac_try;;
- *) ac_try_echo=$ac_try;;
-esac
-eval ac_try_echo="\"\$as_me:$LINENO: $ac_try_echo\""
-$as_echo "$ac_try_echo") >&5
- (eval "$ac_compile") 2>conftest.er1
- ac_status=$?
- grep -v '^ *+' conftest.er1 >conftest.err
- rm -f conftest.er1
- cat conftest.err >&5
- $as_echo "$as_me:$LINENO: \$? = $ac_status" >&5
- (exit $ac_status); } && {
- test -z "$ac_c_werror_flag" ||
- test ! -s conftest.err
- } && test -s conftest.$ac_objext; then
- ac_cv_safe_to_define___extensions__=yes
-else
- $as_echo "$as_me: failed program was:" >&5
-sed 's/^/| /' conftest.$ac_ext >&5
-
- ac_cv_safe_to_define___extensions__=no
-fi
-
-rm -f core conftest.err conftest.$ac_objext conftest.$ac_ext
-fi
-{ $as_echo "$as_me:$LINENO: result: $ac_cv_safe_to_define___extensions__" >&5
-$as_echo "$ac_cv_safe_to_define___extensions__" >&6; }
- test $ac_cv_safe_to_define___extensions__ = yes &&
- cat >>confdefs.h <<\_ACEOF
-#define __EXTENSIONS__ 1
-_ACEOF
-
- cat >>confdefs.h <<\_ACEOF
-#define _ALL_SOURCE 1
-_ACEOF
-
- cat >>confdefs.h <<\_ACEOF
-#define _GNU_SOURCE 1
-_ACEOF
-
- cat >>confdefs.h <<\_ACEOF
-#define _POSIX_PTHREAD_SEMANTICS 1
-_ACEOF
-
- cat >>confdefs.h <<\_ACEOF
-#define _TANDEM_SOURCE 1
-_ACEOF
-
-
-
-if test "x$enable_threads" = xyes; then
- echo
- echo "Threading support:"
-
-
-
-ac_ext=c
-ac_cpp='$CPP $CPPFLAGS'
-ac_compile='$CC -c $CFLAGS $CPPFLAGS conftest.$ac_ext >&5'
-ac_link='$CC -o conftest$ac_exeext $CFLAGS $CPPFLAGS $LDFLAGS conftest.$ac_ext $LIBS >&5'
-ac_compiler_gnu=$ac_cv_c_compiler_gnu
-
-acx_pthread_ok=no
-
-# We used to check for pthread.h first, but this fails if pthread.h
-# requires special compiler flags (e.g. on True64 or Sequent).
-# It gets checked for in the link test anyway.
-
-# First of all, check if the user has set any of the PTHREAD_LIBS,
-# etcetera environment variables, and if threads linking works using
-# them:
-if test x"$PTHREAD_LIBS$PTHREAD_CFLAGS" != x; then
- save_CFLAGS="$CFLAGS"
- CFLAGS="$CFLAGS $PTHREAD_CFLAGS"
- save_LIBS="$LIBS"
- LIBS="$PTHREAD_LIBS $LIBS"
- { $as_echo "$as_me:$LINENO: checking for pthread_join in LIBS=$PTHREAD_LIBS with CFLAGS=$PTHREAD_CFLAGS" >&5
-$as_echo_n "checking for pthread_join in LIBS=$PTHREAD_LIBS with CFLAGS=$PTHREAD_CFLAGS... " >&6; }
- cat >conftest.$ac_ext <<_ACEOF
-/* confdefs.h. */
-_ACEOF
-cat confdefs.h >>conftest.$ac_ext
-cat >>conftest.$ac_ext <<_ACEOF
-/* end confdefs.h. */
-
-/* Override any GCC internal prototype to avoid an error.
- Use char because int might match the return type of a GCC
- builtin and then its argument prototype would still apply. */
-#ifdef __cplusplus
-extern "C"
-#endif
-char pthread_join ();
-int
-main ()
-{
-return pthread_join ();
- ;
- return 0;
-}
-_ACEOF
-rm -f conftest.$ac_objext conftest$ac_exeext
-if { (ac_try="$ac_link"
-case "(($ac_try" in
- *\"* | *\`* | *\\*) ac_try_echo=\$ac_try;;
- *) ac_try_echo=$ac_try;;
-esac
-eval ac_try_echo="\"\$as_me:$LINENO: $ac_try_echo\""
-$as_echo "$ac_try_echo") >&5
- (eval "$ac_link") 2>conftest.er1
- ac_status=$?
- grep -v '^ *+' conftest.er1 >conftest.err
- rm -f conftest.er1
- cat conftest.err >&5
- $as_echo "$as_me:$LINENO: \$? = $ac_status" >&5
- (exit $ac_status); } && {
- test -z "$ac_c_werror_flag" ||
- test ! -s conftest.err
- } && test -s conftest$ac_exeext && {
- test "$cross_compiling" = yes ||
- $as_test_x conftest$ac_exeext
- }; then
- acx_pthread_ok=yes
-else
- $as_echo "$as_me: failed program was:" >&5
-sed 's/^/| /' conftest.$ac_ext >&5
-
-
-fi
-
-rm -rf conftest.dSYM
-rm -f core conftest.err conftest.$ac_objext conftest_ipa8_conftest.oo \
- conftest$ac_exeext conftest.$ac_ext
- { $as_echo "$as_me:$LINENO: result: $acx_pthread_ok" >&5
-$as_echo "$acx_pthread_ok" >&6; }
- if test x"$acx_pthread_ok" = xno; then
- PTHREAD_LIBS=""
- PTHREAD_CFLAGS=""
- fi
- LIBS="$save_LIBS"
- CFLAGS="$save_CFLAGS"
-fi
-
-# We must check for the threads library under a number of different
-# names; the ordering is very important because some systems
-# (e.g. DEC) have both -lpthread and -lpthreads, where one of the
-# libraries is broken (non-POSIX).
-
-# Create a list of thread flags to try. Items starting with a "-" are
-# C compiler flags, and other items are library names, except for "none"
-# which indicates that we try without any flags at all, and "pthread-config"
-# which is a program returning the flags for the Pth emulation library.
-
-acx_pthread_flags="pthreads none -Kthread -kthread lthread -pthread -pthreads -mthreads pthread --thread-safe -mt pthread-config"
-
-# The ordering *is* (sometimes) important. Some notes on the
-# individual items follow:
-
-# pthreads: AIX (must check this before -lpthread)
-# none: in case threads are in libc; should be tried before -Kthread and
-# other compiler flags to prevent continual compiler warnings
-# -Kthread: Sequent (threads in libc, but -Kthread needed for pthread.h)
-# -kthread: FreeBSD kernel threads (preferred to -pthread since SMP-able)
-# lthread: LinuxThreads port on FreeBSD (also preferred to -pthread)
-# -pthread: Linux/gcc (kernel threads), BSD/gcc (userland threads)
-# -pthreads: Solaris/gcc
-# -mthreads: Mingw32/gcc, Lynx/gcc
-# -mt: Sun Workshop C (may only link SunOS threads [-lthread], but it
-# doesn't hurt to check since this sometimes defines pthreads too;
-# also defines -D_REENTRANT)
-# ... -mt is also the pthreads flag for HP/aCC
-# pthread: Linux, etcetera
-# --thread-safe: KAI C++
-# pthread-config: use pthread-config program (for GNU Pth library)
-
-case "${host_cpu}-${host_os}" in
- *solaris*)
-
- # On Solaris (at least, for some versions), libc contains stubbed
- # (non-functional) versions of the pthreads routines, so link-based
- # tests will erroneously succeed. (We need to link with -pthreads/-mt/
- # -lpthread.) (The stubs are missing pthread_cleanup_push, or rather
- # a function called by this macro, so we could check for that, but
- # who knows whether they'll stub that too in a future libc.) So,
- # we'll just look for -pthreads and -lpthread first:
-
- acx_pthread_flags="-pthreads pthread -mt -pthread $acx_pthread_flags"
- ;;
-esac
-
-if test x"$acx_pthread_ok" = xno; then
-for flag in $acx_pthread_flags; do
-
- case $flag in
- none)
- { $as_echo "$as_me:$LINENO: checking whether pthreads work without any flags" >&5
-$as_echo_n "checking whether pthreads work without any flags... " >&6; }
- ;;
-
- -*)
- { $as_echo "$as_me:$LINENO: checking whether pthreads work with $flag" >&5
-$as_echo_n "checking whether pthreads work with $flag... " >&6; }
- PTHREAD_CFLAGS="$flag"
- ;;
-
- pthread-config)
- # Extract the first word of "pthread-config", so it can be a program name with args.
-set dummy pthread-config; ac_word=$2
-{ $as_echo "$as_me:$LINENO: checking for $ac_word" >&5
-$as_echo_n "checking for $ac_word... " >&6; }
-if test "${ac_cv_prog_acx_pthread_config+set}" = set; then
- $as_echo_n "(cached) " >&6
-else
- if test -n "$acx_pthread_config"; then
- ac_cv_prog_acx_pthread_config="$acx_pthread_config" # Let the user override the test.
-else
-as_save_IFS=$IFS; IFS=$PATH_SEPARATOR
-for as_dir in $PATH
-do
- IFS=$as_save_IFS
- test -z "$as_dir" && as_dir=.
- for ac_exec_ext in '' $ac_executable_extensions; do
- if { test -f "$as_dir/$ac_word$ac_exec_ext" && $as_test_x "$as_dir/$ac_word$ac_exec_ext"; }; then
- ac_cv_prog_acx_pthread_config="yes"
- $as_echo "$as_me:$LINENO: found $as_dir/$ac_word$ac_exec_ext" >&5
- break 2
- fi
-done
-done
-IFS=$as_save_IFS
-
- test -z "$ac_cv_prog_acx_pthread_config" && ac_cv_prog_acx_pthread_config="no"
-fi
-fi
-acx_pthread_config=$ac_cv_prog_acx_pthread_config
-if test -n "$acx_pthread_config"; then
- { $as_echo "$as_me:$LINENO: result: $acx_pthread_config" >&5
-$as_echo "$acx_pthread_config" >&6; }
-else
- { $as_echo "$as_me:$LINENO: result: no" >&5
-$as_echo "no" >&6; }
-fi
-
-
- if test x"$acx_pthread_config" = xno; then continue; fi
- PTHREAD_CFLAGS="`pthread-config --cflags`"
- PTHREAD_LIBS="`pthread-config --ldflags` `pthread-config --libs`"
- ;;
-
- *)
- { $as_echo "$as_me:$LINENO: checking for the pthreads library -l$flag" >&5
-$as_echo_n "checking for the pthreads library -l$flag... " >&6; }
- PTHREAD_LIBS="-l$flag"
- ;;
- esac
-
- save_LIBS="$LIBS"
- save_CFLAGS="$CFLAGS"
- LIBS="$PTHREAD_LIBS $LIBS"
- CFLAGS="$CFLAGS $PTHREAD_CFLAGS"
-
- # Check for various functions. We must include pthread.h,
- # since some functions may be macros. (On the Sequent, we
- # need a special flag -Kthread to make this header compile.)
- # We check for pthread_join because it is in -lpthread on IRIX
- # while pthread_create is in libc. We check for pthread_attr_init
- # due to DEC craziness with -lpthreads. We check for
- # pthread_cleanup_push because it is one of the few pthread
- # functions on Solaris that doesn't have a non-functional libc stub.
- # We try pthread_create on general principles.
- cat >conftest.$ac_ext <<_ACEOF
-/* confdefs.h. */
-_ACEOF
-cat confdefs.h >>conftest.$ac_ext
-cat >>conftest.$ac_ext <<_ACEOF
-/* end confdefs.h. */
-#include <pthread.h>
-int
-main ()
-{
-pthread_t th; pthread_join(th, 0);
- pthread_attr_init(0); pthread_cleanup_push(0, 0);
- pthread_create(0,0,0,0); pthread_cleanup_pop(0);
- ;
- return 0;
-}
-_ACEOF
-rm -f conftest.$ac_objext conftest$ac_exeext
-if { (ac_try="$ac_link"
-case "(($ac_try" in
- *\"* | *\`* | *\\*) ac_try_echo=\$ac_try;;
- *) ac_try_echo=$ac_try;;
-esac
-eval ac_try_echo="\"\$as_me:$LINENO: $ac_try_echo\""
-$as_echo "$ac_try_echo") >&5
- (eval "$ac_link") 2>conftest.er1
- ac_status=$?
- grep -v '^ *+' conftest.er1 >conftest.err
- rm -f conftest.er1
- cat conftest.err >&5
- $as_echo "$as_me:$LINENO: \$? = $ac_status" >&5
- (exit $ac_status); } && {
- test -z "$ac_c_werror_flag" ||
- test ! -s conftest.err
- } && test -s conftest$ac_exeext && {
- test "$cross_compiling" = yes ||
- $as_test_x conftest$ac_exeext
- }; then
- acx_pthread_ok=yes
-else
- $as_echo "$as_me: failed program was:" >&5
-sed 's/^/| /' conftest.$ac_ext >&5
-
-
-fi
-
-rm -rf conftest.dSYM
-rm -f core conftest.err conftest.$ac_objext conftest_ipa8_conftest.oo \
- conftest$ac_exeext conftest.$ac_ext
-
- LIBS="$save_LIBS"
- CFLAGS="$save_CFLAGS"
-
- { $as_echo "$as_me:$LINENO: result: $acx_pthread_ok" >&5
-$as_echo "$acx_pthread_ok" >&6; }
- if test "x$acx_pthread_ok" = xyes; then
- break;
- fi
-
- PTHREAD_LIBS=""
- PTHREAD_CFLAGS=""
-done
-fi
-
-# Various other checks:
-if test "x$acx_pthread_ok" = xyes; then
- save_LIBS="$LIBS"
- LIBS="$PTHREAD_LIBS $LIBS"
- save_CFLAGS="$CFLAGS"
- CFLAGS="$CFLAGS $PTHREAD_CFLAGS"
-
- # Detect AIX lossage: JOINABLE attribute is called UNDETACHED.
- { $as_echo "$as_me:$LINENO: checking for joinable pthread attribute" >&5
-$as_echo_n "checking for joinable pthread attribute... " >&6; }
- attr_name=unknown
- for attr in PTHREAD_CREATE_JOINABLE PTHREAD_CREATE_UNDETACHED; do
- cat >conftest.$ac_ext <<_ACEOF
-/* confdefs.h. */
-_ACEOF
-cat confdefs.h >>conftest.$ac_ext
-cat >>conftest.$ac_ext <<_ACEOF
-/* end confdefs.h. */
-#include <pthread.h>
-int
-main ()
-{
-int attr=$attr; return attr;
- ;
- return 0;
-}
-_ACEOF
-rm -f conftest.$ac_objext conftest$ac_exeext
-if { (ac_try="$ac_link"
-case "(($ac_try" in
- *\"* | *\`* | *\\*) ac_try_echo=\$ac_try;;
- *) ac_try_echo=$ac_try;;
-esac
-eval ac_try_echo="\"\$as_me:$LINENO: $ac_try_echo\""
-$as_echo "$ac_try_echo") >&5
- (eval "$ac_link") 2>conftest.er1
- ac_status=$?
- grep -v '^ *+' conftest.er1 >conftest.err
- rm -f conftest.er1
- cat conftest.err >&5
- $as_echo "$as_me:$LINENO: \$? = $ac_status" >&5
- (exit $ac_status); } && {
- test -z "$ac_c_werror_flag" ||
- test ! -s conftest.err
- } && test -s conftest$ac_exeext && {
- test "$cross_compiling" = yes ||
- $as_test_x conftest$ac_exeext
- }; then
- attr_name=$attr; break
-else
- $as_echo "$as_me: failed program was:" >&5
-sed 's/^/| /' conftest.$ac_ext >&5
-
-
-fi
-
-rm -rf conftest.dSYM
-rm -f core conftest.err conftest.$ac_objext conftest_ipa8_conftest.oo \
- conftest$ac_exeext conftest.$ac_ext
- done
- { $as_echo "$as_me:$LINENO: result: $attr_name" >&5
-$as_echo "$attr_name" >&6; }
- if test "$attr_name" != PTHREAD_CREATE_JOINABLE; then
-
-cat >>confdefs.h <<_ACEOF
-#define PTHREAD_CREATE_JOINABLE $attr_name
-_ACEOF
-
- fi
-
- { $as_echo "$as_me:$LINENO: checking if more special flags are required for pthreads" >&5
-$as_echo_n "checking if more special flags are required for pthreads... " >&6; }
- flag=no
- case "${host_cpu}-${host_os}" in
- *-aix* | *-freebsd* | *-darwin*) flag="-D_THREAD_SAFE";;
- *solaris* | *-osf* | *-hpux*) flag="-D_REENTRANT";;
- esac
- { $as_echo "$as_me:$LINENO: result: ${flag}" >&5
-$as_echo "${flag}" >&6; }
- if test "x$flag" != xno; then
- PTHREAD_CFLAGS="$flag $PTHREAD_CFLAGS"
- fi
-
- LIBS="$save_LIBS"
- CFLAGS="$save_CFLAGS"
-
- # More AIX lossage: must compile with xlc_r or cc_r
- if test x"$GCC" != xyes; then
- for ac_prog in xlc_r cc_r
-do
- # Extract the first word of "$ac_prog", so it can be a program name with args.
-set dummy $ac_prog; ac_word=$2
-{ $as_echo "$as_me:$LINENO: checking for $ac_word" >&5
-$as_echo_n "checking for $ac_word... " >&6; }
-if test "${ac_cv_prog_PTHREAD_CC+set}" = set; then
- $as_echo_n "(cached) " >&6
-else
- if test -n "$PTHREAD_CC"; then
- ac_cv_prog_PTHREAD_CC="$PTHREAD_CC" # Let the user override the test.
-else
-as_save_IFS=$IFS; IFS=$PATH_SEPARATOR
-for as_dir in $PATH
-do
- IFS=$as_save_IFS
- test -z "$as_dir" && as_dir=.
- for ac_exec_ext in '' $ac_executable_extensions; do
- if { test -f "$as_dir/$ac_word$ac_exec_ext" && $as_test_x "$as_dir/$ac_word$ac_exec_ext"; }; then
- ac_cv_prog_PTHREAD_CC="$ac_prog"
- $as_echo "$as_me:$LINENO: found $as_dir/$ac_word$ac_exec_ext" >&5
- break 2
- fi
-done
-done
-IFS=$as_save_IFS
-
-fi
-fi
-PTHREAD_CC=$ac_cv_prog_PTHREAD_CC
-if test -n "$PTHREAD_CC"; then
- { $as_echo "$as_me:$LINENO: result: $PTHREAD_CC" >&5
-$as_echo "$PTHREAD_CC" >&6; }
-else
- { $as_echo "$as_me:$LINENO: result: no" >&5
-$as_echo "no" >&6; }
-fi
-
-
- test -n "$PTHREAD_CC" && break
-done
-test -n "$PTHREAD_CC" || PTHREAD_CC="${CC}"
-
- else
- PTHREAD_CC=$CC
- fi
-else
- PTHREAD_CC="$CC"
-fi
-
-
-
-
-
-# Finally, execute ACTION-IF-FOUND/ACTION-IF-NOT-FOUND:
-if test x"$acx_pthread_ok" = xyes; then
-
-cat >>confdefs.h <<\_ACEOF
-#define HAVE_PTHREAD 1
-_ACEOF
-
- :
-else
- acx_pthread_ok=no
-
-fi
-ac_ext=c
-ac_cpp='$CPP $CPPFLAGS'
-ac_compile='$CC -c $CFLAGS $CPPFLAGS conftest.$ac_ext >&5'
-ac_link='$CC -o conftest$ac_exeext $CFLAGS $CPPFLAGS $LDFLAGS conftest.$ac_ext $LIBS >&5'
-ac_compiler_gnu=$ac_cv_c_compiler_gnu
-
-
- LIBS="$LIBS $PTHREAD_LIBS"
- CFLAGS="$PTHREAD_CFLAGS $CFLAGS"
- CC="$PTHREAD_CC"
-fi
-
-echo
-echo "Initializing Libtool:"
-CXX=no
-F77=no
-# Check whether --enable-shared was given.
-if test "${enable_shared+set}" = set; then
- enableval=$enable_shared; p=${PACKAGE-default}
- case $enableval in
- yes) enable_shared=yes ;;
- no) enable_shared=no ;;
- *)
- enable_shared=no
- # Look at the argument we got. We use all the common list separators.
- lt_save_ifs="$IFS"; IFS="${IFS}$PATH_SEPARATOR,"
- for pkg in $enableval; do
- IFS="$lt_save_ifs"
- if test "X$pkg" = "X$p"; then
- enable_shared=yes
- fi
- done
- IFS="$lt_save_ifs"
- ;;
- esac
-else
- enable_shared=yes
-fi
-
-
-# Check whether --enable-static was given.
-if test "${enable_static+set}" = set; then
- enableval=$enable_static; p=${PACKAGE-default}
- case $enableval in
- yes) enable_static=yes ;;
- no) enable_static=no ;;
- *)
- enable_static=no
- # Look at the argument we got. We use all the common list separators.
- lt_save_ifs="$IFS"; IFS="${IFS}$PATH_SEPARATOR,"
- for pkg in $enableval; do
- IFS="$lt_save_ifs"
- if test "X$pkg" = "X$p"; then
- enable_static=yes
- fi
- done
- IFS="$lt_save_ifs"
- ;;
- esac
-else
- enable_static=yes
-fi
-
-
-# Check whether --enable-fast-install was given.
-if test "${enable_fast_install+set}" = set; then
- enableval=$enable_fast_install; p=${PACKAGE-default}
- case $enableval in
- yes) enable_fast_install=yes ;;
- no) enable_fast_install=no ;;
- *)
- enable_fast_install=no
- # Look at the argument we got. We use all the common list separators.
- lt_save_ifs="$IFS"; IFS="${IFS}$PATH_SEPARATOR,"
- for pkg in $enableval; do
- IFS="$lt_save_ifs"
- if test "X$pkg" = "X$p"; then
- enable_fast_install=yes
- fi
- done
- IFS="$lt_save_ifs"
- ;;
- esac
-else
- enable_fast_install=yes
-fi
-
-
-{ $as_echo "$as_me:$LINENO: checking for a sed that does not truncate output" >&5
-$as_echo_n "checking for a sed that does not truncate output... " >&6; }
-if test "${lt_cv_path_SED+set}" = set; then
- $as_echo_n "(cached) " >&6
-else
- # Loop through the user's path and test for sed and gsed.
-# Then use that list of sed's as ones to test for truncation.
-as_save_IFS=$IFS; IFS=$PATH_SEPARATOR
-for as_dir in $PATH
-do
- IFS=$as_save_IFS
- test -z "$as_dir" && as_dir=.
- for lt_ac_prog in sed gsed; do
- for ac_exec_ext in '' $ac_executable_extensions; do
- if { test -f "$as_dir/$lt_ac_prog$ac_exec_ext" && $as_test_x "$as_dir/$lt_ac_prog$ac_exec_ext"; }; then
- lt_ac_sed_list="$lt_ac_sed_list $as_dir/$lt_ac_prog$ac_exec_ext"
- fi
- done
- done
-done
-IFS=$as_save_IFS
-lt_ac_max=0
-lt_ac_count=0
-# Add /usr/xpg4/bin/sed as it is typically found on Solaris
-# along with /bin/sed that truncates output.
-for lt_ac_sed in $lt_ac_sed_list /usr/xpg4/bin/sed; do
- test ! -f $lt_ac_sed && continue
- cat /dev/null > conftest.in
- lt_ac_count=0
- echo $ECHO_N "0123456789$ECHO_C" >conftest.in
- # Check for GNU sed and select it if it is found.
- if "$lt_ac_sed" --version 2>&1 < /dev/null | grep 'GNU' > /dev/null; then
- lt_cv_path_SED=$lt_ac_sed
- break
- fi
- while true; do
- cat conftest.in conftest.in >conftest.tmp
- mv conftest.tmp conftest.in
- cp conftest.in conftest.nl
- echo >>conftest.nl
- $lt_ac_sed -e 's/a$//' < conftest.nl >conftest.out || break
- cmp -s conftest.out conftest.nl || break
- # 10000 chars as input seems more than enough
- test $lt_ac_count -gt 10 && break
- lt_ac_count=`expr $lt_ac_count + 1`
- if test $lt_ac_count -gt $lt_ac_max; then
- lt_ac_max=$lt_ac_count
- lt_cv_path_SED=$lt_ac_sed
- fi
- done
-done
-
-fi
-
-SED=$lt_cv_path_SED
-
-{ $as_echo "$as_me:$LINENO: result: $SED" >&5
-$as_echo "$SED" >&6; }
-
-
-# Check whether --with-gnu-ld was given.
-if test "${with_gnu_ld+set}" = set; then
- withval=$with_gnu_ld; test "$withval" = no || with_gnu_ld=yes
-else
- with_gnu_ld=no
-fi
-
-ac_prog=ld
-if test "$GCC" = yes; then
- # Check if gcc -print-prog-name=ld gives a path.
- { $as_echo "$as_me:$LINENO: checking for ld used by $CC" >&5
-$as_echo_n "checking for ld used by $CC... " >&6; }
- case $host in
- *-*-mingw*)
- # gcc leaves a trailing carriage return which upsets mingw
- ac_prog=`($CC -print-prog-name=ld) 2>&5 | tr -d '\015'` ;;
- *)
- ac_prog=`($CC -print-prog-name=ld) 2>&5` ;;
- esac
- case $ac_prog in
- # Accept absolute paths.
- [\\/]* | ?:[\\/]*)
- re_direlt='/[^/][^/]*/\.\./'
- # Canonicalize the pathname of ld
- ac_prog=`echo $ac_prog| $SED 's%\\\\%/%g'`
- while echo $ac_prog | grep "$re_direlt" > /dev/null 2>&1; do
- ac_prog=`echo $ac_prog| $SED "s%$re_direlt%/%"`
- done
- test -z "$LD" && LD="$ac_prog"
- ;;
- "")
- # If it fails, then pretend we aren't using GCC.
- ac_prog=ld
- ;;
- *)
- # If it is relative, then search for the first ld in PATH.
- with_gnu_ld=unknown
- ;;
- esac
-elif test "$with_gnu_ld" = yes; then
- { $as_echo "$as_me:$LINENO: checking for GNU ld" >&5
-$as_echo_n "checking for GNU ld... " >&6; }
-else
- { $as_echo "$as_me:$LINENO: checking for non-GNU ld" >&5
-$as_echo_n "checking for non-GNU ld... " >&6; }
-fi
-if test "${lt_cv_path_LD+set}" = set; then
- $as_echo_n "(cached) " >&6
-else
- if test -z "$LD"; then
- lt_save_ifs="$IFS"; IFS=$PATH_SEPARATOR
- for ac_dir in $PATH; do
- IFS="$lt_save_ifs"
- test -z "$ac_dir" && ac_dir=.
- if test -f "$ac_dir/$ac_prog" || test -f "$ac_dir/$ac_prog$ac_exeext"; then
- lt_cv_path_LD="$ac_dir/$ac_prog"
- # Check to see if the program is GNU ld. I'd rather use --version,
- # but apparently some variants of GNU ld only accept -v.
- # Break only if it was the GNU/non-GNU ld that we prefer.
- case `"$lt_cv_path_LD" -v 2>&1 </dev/null` in
- *GNU* | *'with BFD'*)
- test "$with_gnu_ld" != no && break
- ;;
- *)
- test "$with_gnu_ld" != yes && break
- ;;
- esac
- fi
- done
- IFS="$lt_save_ifs"
-else
- lt_cv_path_LD="$LD" # Let the user override the test with a path.
-fi
-fi
-
-LD="$lt_cv_path_LD"
-if test -n "$LD"; then
- { $as_echo "$as_me:$LINENO: result: $LD" >&5
-$as_echo "$LD" >&6; }
-else
- { $as_echo "$as_me:$LINENO: result: no" >&5
-$as_echo "no" >&6; }
-fi
-test -z "$LD" && { { $as_echo "$as_me:$LINENO: error: no acceptable ld found in \$PATH" >&5
-$as_echo "$as_me: error: no acceptable ld found in \$PATH" >&2;}
- { (exit 1); exit 1; }; }
-{ $as_echo "$as_me:$LINENO: checking if the linker ($LD) is GNU ld" >&5
-$as_echo_n "checking if the linker ($LD) is GNU ld... " >&6; }
-if test "${lt_cv_prog_gnu_ld+set}" = set; then
- $as_echo_n "(cached) " >&6
-else
- # I'd rather use --version here, but apparently some GNU lds only accept -v.
-case `$LD -v 2>&1 </dev/null` in
-*GNU* | *'with BFD'*)
- lt_cv_prog_gnu_ld=yes
- ;;
-*)
- lt_cv_prog_gnu_ld=no
- ;;
-esac
-fi
-{ $as_echo "$as_me:$LINENO: result: $lt_cv_prog_gnu_ld" >&5
-$as_echo "$lt_cv_prog_gnu_ld" >&6; }
-with_gnu_ld=$lt_cv_prog_gnu_ld
-
-
-{ $as_echo "$as_me:$LINENO: checking for $LD option to reload object files" >&5
-$as_echo_n "checking for $LD option to reload object files... " >&6; }
-if test "${lt_cv_ld_reload_flag+set}" = set; then
- $as_echo_n "(cached) " >&6
-else
- lt_cv_ld_reload_flag='-r'
-fi
-{ $as_echo "$as_me:$LINENO: result: $lt_cv_ld_reload_flag" >&5
-$as_echo "$lt_cv_ld_reload_flag" >&6; }
-reload_flag=$lt_cv_ld_reload_flag
-case $reload_flag in
-"" | " "*) ;;
-*) reload_flag=" $reload_flag" ;;
-esac
-reload_cmds='$LD$reload_flag -o $output$reload_objs'
-case $host_os in
- darwin*)
- if test "$GCC" = yes; then
- reload_cmds='$LTCC $LTCFLAGS -nostdlib ${wl}-r -o $output$reload_objs'
- else
- reload_cmds='$LD$reload_flag -o $output$reload_objs'
- fi
- ;;
-esac
-
-{ $as_echo "$as_me:$LINENO: checking for BSD-compatible nm" >&5
-$as_echo_n "checking for BSD-compatible nm... " >&6; }
-if test "${lt_cv_path_NM+set}" = set; then
- $as_echo_n "(cached) " >&6
-else
- if test -n "$NM"; then
- # Let the user override the test.
- lt_cv_path_NM="$NM"
-else
- lt_nm_to_check="${ac_tool_prefix}nm"
- if test -n "$ac_tool_prefix" && test "$build" = "$host"; then
- lt_nm_to_check="$lt_nm_to_check nm"
- fi
- for lt_tmp_nm in $lt_nm_to_check; do
- lt_save_ifs="$IFS"; IFS=$PATH_SEPARATOR
- for ac_dir in $PATH /usr/ccs/bin/elf /usr/ccs/bin /usr/ucb /bin; do
- IFS="$lt_save_ifs"
- test -z "$ac_dir" && ac_dir=.
- tmp_nm="$ac_dir/$lt_tmp_nm"
- if test -f "$tmp_nm" || test -f "$tmp_nm$ac_exeext" ; then
- # Check to see if the nm accepts a BSD-compat flag.
- # Adding the `sed 1q' prevents false positives on HP-UX, which says:
- # nm: unknown option "B" ignored
- # Tru64's nm complains that /dev/null is an invalid object file
- case `"$tmp_nm" -B /dev/null 2>&1 | sed '1q'` in
- */dev/null* | *'Invalid file or object type'*)
- lt_cv_path_NM="$tmp_nm -B"
- break
- ;;
- *)
- case `"$tmp_nm" -p /dev/null 2>&1 | sed '1q'` in
- */dev/null*)
- lt_cv_path_NM="$tmp_nm -p"
- break
- ;;
- *)
- lt_cv_path_NM=${lt_cv_path_NM="$tmp_nm"} # keep the first match, but
- continue # so that we can try to find one that supports BSD flags
- ;;
- esac
- ;;
- esac
- fi
- done
- IFS="$lt_save_ifs"
- done
- test -z "$lt_cv_path_NM" && lt_cv_path_NM=nm
-fi
-fi
-{ $as_echo "$as_me:$LINENO: result: $lt_cv_path_NM" >&5
-$as_echo "$lt_cv_path_NM" >&6; }
-NM="$lt_cv_path_NM"
-
-{ $as_echo "$as_me:$LINENO: checking how to recognize dependent libraries" >&5
-$as_echo_n "checking how to recognize dependent libraries... " >&6; }
-if test "${lt_cv_deplibs_check_method+set}" = set; then
- $as_echo_n "(cached) " >&6
-else
- lt_cv_file_magic_cmd='$MAGIC_CMD'
-lt_cv_file_magic_test_file=
-lt_cv_deplibs_check_method='unknown'
-# Need to set the preceding variable on all platforms that support
-# interlibrary dependencies.
-# 'none' -- dependencies not supported.
-# `unknown' -- same as none, but documents that we really don't know.
-# 'pass_all' -- all dependencies passed with no checks.
-# 'test_compile' -- check by making test program.
-# 'file_magic [[regex]]' -- check by looking for files in library path
-# which responds to the $file_magic_cmd with a given extended regex.
-# If you have `file' or equivalent on your system and you're not sure
-# whether `pass_all' will *always* work, you probably want this one.
-
-case $host_os in
-aix[4-9]*)
- lt_cv_deplibs_check_method=pass_all
- ;;
-
-beos*)
- lt_cv_deplibs_check_method=pass_all
- ;;
-
-bsdi[45]*)
- lt_cv_deplibs_check_method='file_magic ELF [0-9][0-9]*-bit [ML]SB (shared object|dynamic lib)'
- lt_cv_file_magic_cmd='/usr/bin/file -L'
- lt_cv_file_magic_test_file=/shlib/libc.so
- ;;
-
-cygwin*)
- # func_win32_libid is a shell function defined in ltmain.sh
- lt_cv_deplibs_check_method='file_magic ^x86 archive import|^x86 DLL'
- lt_cv_file_magic_cmd='func_win32_libid'
- ;;
-
-mingw* | pw32*)
- # Base MSYS/MinGW do not provide the 'file' command needed by
- # func_win32_libid shell function, so use a weaker test based on 'objdump',
- # unless we find 'file', for example because we are cross-compiling.
- if ( file / ) >/dev/null 2>&1; then
- lt_cv_deplibs_check_method='file_magic ^x86 archive import|^x86 DLL'
- lt_cv_file_magic_cmd='func_win32_libid'
- else
- lt_cv_deplibs_check_method='file_magic file format pei*-i386(.*architecture: i386)?'
- lt_cv_file_magic_cmd='$OBJDUMP -f'
- fi
- ;;
-
-darwin* | rhapsody*)
- lt_cv_deplibs_check_method=pass_all
- ;;
-
-freebsd* | dragonfly*)
- if echo __ELF__ | $CC -E - | grep __ELF__ > /dev/null; then
- case $host_cpu in
- i*86 )
- # Not sure whether the presence of OpenBSD here was a mistake.
- # Let's accept both of them until this is cleared up.
- lt_cv_deplibs_check_method='file_magic (FreeBSD|OpenBSD|DragonFly)/i[3-9]86 (compact )?demand paged shared library'
- lt_cv_file_magic_cmd=/usr/bin/file
- lt_cv_file_magic_test_file=`echo /usr/lib/libc.so.*`
- ;;
- esac
- else
- lt_cv_deplibs_check_method=pass_all
- fi
- ;;
-
-gnu*)
- lt_cv_deplibs_check_method=pass_all
- ;;
-
-hpux10.20* | hpux11*)
- lt_cv_file_magic_cmd=/usr/bin/file
- case $host_cpu in
- ia64*)
- lt_cv_deplibs_check_method='file_magic (s[0-9][0-9][0-9]|ELF-[0-9][0-9]) shared object file - IA64'
- lt_cv_file_magic_test_file=/usr/lib/hpux32/libc.so
- ;;
- hppa*64*)
- lt_cv_deplibs_check_method='file_magic (s[0-9][0-9][0-9]|ELF-[0-9][0-9]) shared object file - PA-RISC [0-9].[0-9]'
- lt_cv_file_magic_test_file=/usr/lib/pa20_64/libc.sl
- ;;
- *)
- lt_cv_deplibs_check_method='file_magic (s[0-9][0-9][0-9]|PA-RISC[0-9].[0-9]) shared library'
- lt_cv_file_magic_test_file=/usr/lib/libc.sl
- ;;
- esac
- ;;
-
-interix[3-9]*)
- # PIC code is broken on Interix 3.x, that's why |\.a not |_pic\.a here
- lt_cv_deplibs_check_method='match_pattern /lib[^/]+(\.so|\.a)$'
- ;;
-
-irix5* | irix6* | nonstopux*)
- case $LD in
- *-32|*"-32 ") libmagic=32-bit;;
- *-n32|*"-n32 ") libmagic=N32;;
- *-64|*"-64 ") libmagic=64-bit;;
- *) libmagic=never-match;;
- esac
- lt_cv_deplibs_check_method=pass_all
- ;;
-
-# This must be Linux ELF.
-linux* | k*bsd*-gnu)
- lt_cv_deplibs_check_method=pass_all
- ;;
-
-netbsd*)
- if echo __ELF__ | $CC -E - | grep __ELF__ > /dev/null; then
- lt_cv_deplibs_check_method='match_pattern /lib[^/]+(\.so\.[0-9]+\.[0-9]+|_pic\.a)$'
- else
- lt_cv_deplibs_check_method='match_pattern /lib[^/]+(\.so|_pic\.a)$'
- fi
- ;;
-
-newos6*)
- lt_cv_deplibs_check_method='file_magic ELF [0-9][0-9]*-bit [ML]SB (executable|dynamic lib)'
- lt_cv_file_magic_cmd=/usr/bin/file
- lt_cv_file_magic_test_file=/usr/lib/libnls.so
- ;;
-
-nto-qnx*)
- lt_cv_deplibs_check_method=unknown
- ;;
-
-openbsd*)
- if test -z "`echo __ELF__ | $CC -E - | grep __ELF__`" || test "$host_os-$host_cpu" = "openbsd2.8-powerpc"; then
- lt_cv_deplibs_check_method='match_pattern /lib[^/]+(\.so\.[0-9]+\.[0-9]+|\.so|_pic\.a)$'
- else
- lt_cv_deplibs_check_method='match_pattern /lib[^/]+(\.so\.[0-9]+\.[0-9]+|_pic\.a)$'
- fi
- ;;
-
-osf3* | osf4* | osf5*)
- lt_cv_deplibs_check_method=pass_all
- ;;
-
-rdos*)
- lt_cv_deplibs_check_method=pass_all
- ;;
-
-solaris*)
- lt_cv_deplibs_check_method=pass_all
- ;;
-
-sysv4 | sysv4.3*)
- case $host_vendor in
- motorola)
- lt_cv_deplibs_check_method='file_magic ELF [0-9][0-9]*-bit [ML]SB (shared object|dynamic lib) M[0-9][0-9]* Version [0-9]'
- lt_cv_file_magic_test_file=`echo /usr/lib/libc.so*`
- ;;
- ncr)
- lt_cv_deplibs_check_method=pass_all
- ;;
- sequent)
- lt_cv_file_magic_cmd='/bin/file'
- lt_cv_deplibs_check_method='file_magic ELF [0-9][0-9]*-bit [LM]SB (shared object|dynamic lib )'
- ;;
- sni)
- lt_cv_file_magic_cmd='/bin/file'
- lt_cv_deplibs_check_method="file_magic ELF [0-9][0-9]*-bit [LM]SB dynamic lib"
- lt_cv_file_magic_test_file=/lib/libc.so
- ;;
- siemens)
- lt_cv_deplibs_check_method=pass_all
- ;;
- pc)
- lt_cv_deplibs_check_method=pass_all
- ;;
- esac
- ;;
-
-sysv5* | sco3.2v5* | sco5v6* | unixware* | OpenUNIX* | sysv4*uw2*)
- lt_cv_deplibs_check_method=pass_all
- ;;
-esac
-
-fi
-{ $as_echo "$as_me:$LINENO: result: $lt_cv_deplibs_check_method" >&5
-$as_echo "$lt_cv_deplibs_check_method" >&6; }
-file_magic_cmd=$lt_cv_file_magic_cmd
-deplibs_check_method=$lt_cv_deplibs_check_method
-test -z "$deplibs_check_method" && deplibs_check_method=unknown
-
-
-
-
-# If no C compiler was specified, use CC.
-LTCC=${LTCC-"$CC"}
-
-# If no C compiler flags were specified, use CFLAGS.
-LTCFLAGS=${LTCFLAGS-"$CFLAGS"}
-
-# Allow CC to be a program name with arguments.
-compiler=$CC
-
-# Check whether --enable-libtool-lock was given.
-if test "${enable_libtool_lock+set}" = set; then
- enableval=$enable_libtool_lock;
-fi
-
-test "x$enable_libtool_lock" != xno && enable_libtool_lock=yes
-
-# Some flags need to be propagated to the compiler or linker for good
-# libtool support.
-case $host in
-ia64-*-hpux*)
- # Find out which ABI we are using.
- echo 'int i;' > conftest.$ac_ext
- if { (eval echo "$as_me:$LINENO: \"$ac_compile\"") >&5
- (eval $ac_compile) 2>&5
- ac_status=$?
- $as_echo "$as_me:$LINENO: \$? = $ac_status" >&5
- (exit $ac_status); }; then
- case `/usr/bin/file conftest.$ac_objext` in
- *ELF-32*)
- HPUX_IA64_MODE="32"
- ;;
- *ELF-64*)
- HPUX_IA64_MODE="64"
- ;;
- esac
- fi
- rm -rf conftest*
- ;;
-*-*-irix6*)
- # Find out which ABI we are using.
- echo '#line 7305 "configure"' > conftest.$ac_ext
- if { (eval echo "$as_me:$LINENO: \"$ac_compile\"") >&5
- (eval $ac_compile) 2>&5
- ac_status=$?
- $as_echo "$as_me:$LINENO: \$? = $ac_status" >&5
- (exit $ac_status); }; then
- if test "$lt_cv_prog_gnu_ld" = yes; then
- case `/usr/bin/file conftest.$ac_objext` in
- *32-bit*)
- LD="${LD-ld} -melf32bsmip"
- ;;
- *N32*)
- LD="${LD-ld} -melf32bmipn32"
- ;;
- *64-bit*)
- LD="${LD-ld} -melf64bmip"
- ;;
- esac
- else
- case `/usr/bin/file conftest.$ac_objext` in
- *32-bit*)
- LD="${LD-ld} -32"
- ;;
- *N32*)
- LD="${LD-ld} -n32"
- ;;
- *64-bit*)
- LD="${LD-ld} -64"
- ;;
- esac
- fi
- fi
- rm -rf conftest*
- ;;
-
-x86_64-*kfreebsd*-gnu|x86_64-*linux*|ppc*-*linux*|powerpc*-*linux*| \
-s390*-*linux*|sparc*-*linux*)
- # Find out which ABI we are using.
- echo 'int i;' > conftest.$ac_ext
- if { (eval echo "$as_me:$LINENO: \"$ac_compile\"") >&5
- (eval $ac_compile) 2>&5
- ac_status=$?
- $as_echo "$as_me:$LINENO: \$? = $ac_status" >&5
- (exit $ac_status); }; then
- case `/usr/bin/file conftest.o` in
- *32-bit*)
- case $host in
- x86_64-*kfreebsd*-gnu)
- LD="${LD-ld} -m elf_i386_fbsd"
- ;;
- x86_64-*linux*)
- LD="${LD-ld} -m elf_i386"
- ;;
- ppc64-*linux*|powerpc64-*linux*)
- LD="${LD-ld} -m elf32ppclinux"
- ;;
- s390x-*linux*)
- LD="${LD-ld} -m elf_s390"
- ;;
- sparc64-*linux*)
- LD="${LD-ld} -m elf32_sparc"
- ;;
- esac
- ;;
- *64-bit*)
- case $host in
- x86_64-*kfreebsd*-gnu)
- LD="${LD-ld} -m elf_x86_64_fbsd"
- ;;
- x86_64-*linux*)
- LD="${LD-ld} -m elf_x86_64"
- ;;
- ppc*-*linux*|powerpc*-*linux*)
- LD="${LD-ld} -m elf64ppc"
- ;;
- s390*-*linux*)
- LD="${LD-ld} -m elf64_s390"
- ;;
- sparc*-*linux*)
- LD="${LD-ld} -m elf64_sparc"
- ;;
- esac
- ;;
- esac
- fi
- rm -rf conftest*
- ;;
-
-*-*-sco3.2v5*)
- # On SCO OpenServer 5, we need -belf to get full-featured binaries.
- SAVE_CFLAGS="$CFLAGS"
- CFLAGS="$CFLAGS -belf"
- { $as_echo "$as_me:$LINENO: checking whether the C compiler needs -belf" >&5
-$as_echo_n "checking whether the C compiler needs -belf... " >&6; }
-if test "${lt_cv_cc_needs_belf+set}" = set; then
- $as_echo_n "(cached) " >&6
-else
- ac_ext=c
-ac_cpp='$CPP $CPPFLAGS'
-ac_compile='$CC -c $CFLAGS $CPPFLAGS conftest.$ac_ext >&5'
-ac_link='$CC -o conftest$ac_exeext $CFLAGS $CPPFLAGS $LDFLAGS conftest.$ac_ext $LIBS >&5'
-ac_compiler_gnu=$ac_cv_c_compiler_gnu
-
- cat >conftest.$ac_ext <<_ACEOF
-/* confdefs.h. */
-_ACEOF
-cat confdefs.h >>conftest.$ac_ext
-cat >>conftest.$ac_ext <<_ACEOF
-/* end confdefs.h. */
-
-int
-main ()
-{
-
- ;
- return 0;
-}
-_ACEOF
-rm -f conftest.$ac_objext conftest$ac_exeext
-if { (ac_try="$ac_link"
-case "(($ac_try" in
- *\"* | *\`* | *\\*) ac_try_echo=\$ac_try;;
- *) ac_try_echo=$ac_try;;
-esac
-eval ac_try_echo="\"\$as_me:$LINENO: $ac_try_echo\""
-$as_echo "$ac_try_echo") >&5
- (eval "$ac_link") 2>conftest.er1
- ac_status=$?
- grep -v '^ *+' conftest.er1 >conftest.err
- rm -f conftest.er1
- cat conftest.err >&5
- $as_echo "$as_me:$LINENO: \$? = $ac_status" >&5
- (exit $ac_status); } && {
- test -z "$ac_c_werror_flag" ||
- test ! -s conftest.err
- } && test -s conftest$ac_exeext && {
- test "$cross_compiling" = yes ||
- $as_test_x conftest$ac_exeext
- }; then
- lt_cv_cc_needs_belf=yes
-else
- $as_echo "$as_me: failed program was:" >&5
-sed 's/^/| /' conftest.$ac_ext >&5
-
- lt_cv_cc_needs_belf=no
-fi
-
-rm -rf conftest.dSYM
-rm -f core conftest.err conftest.$ac_objext conftest_ipa8_conftest.oo \
- conftest$ac_exeext conftest.$ac_ext
- ac_ext=c
-ac_cpp='$CPP $CPPFLAGS'
-ac_compile='$CC -c $CFLAGS $CPPFLAGS conftest.$ac_ext >&5'
-ac_link='$CC -o conftest$ac_exeext $CFLAGS $CPPFLAGS $LDFLAGS conftest.$ac_ext $LIBS >&5'
-ac_compiler_gnu=$ac_cv_c_compiler_gnu
-
-fi
-{ $as_echo "$as_me:$LINENO: result: $lt_cv_cc_needs_belf" >&5
-$as_echo "$lt_cv_cc_needs_belf" >&6; }
- if test x"$lt_cv_cc_needs_belf" != x"yes"; then
- # this is probably gcc 2.8.0, egcs 1.0 or newer; no need for -belf
- CFLAGS="$SAVE_CFLAGS"
- fi
- ;;
-sparc*-*solaris*)
- # Find out which ABI we are using.
- echo 'int i;' > conftest.$ac_ext
- if { (eval echo "$as_me:$LINENO: \"$ac_compile\"") >&5
- (eval $ac_compile) 2>&5
- ac_status=$?
- $as_echo "$as_me:$LINENO: \$? = $ac_status" >&5
- (exit $ac_status); }; then
- case `/usr/bin/file conftest.o` in
- *64-bit*)
- case $lt_cv_prog_gnu_ld in
- yes*) LD="${LD-ld} -m elf64_sparc" ;;
- *)
- if ${LD-ld} -64 -r -o conftest2.o conftest.o >/dev/null 2>&1; then
- LD="${LD-ld} -64"
- fi
- ;;
- esac
- ;;
- esac
- fi
- rm -rf conftest*
- ;;
-
-
-esac
-
-need_locks="$enable_libtool_lock"
-
-
-
-for ac_header in dlfcn.h
-do
-as_ac_Header=`$as_echo "ac_cv_header_$ac_header" | $as_tr_sh`
-if { as_var=$as_ac_Header; eval "test \"\${$as_var+set}\" = set"; }; then
- { $as_echo "$as_me:$LINENO: checking for $ac_header" >&5
-$as_echo_n "checking for $ac_header... " >&6; }
-if { as_var=$as_ac_Header; eval "test \"\${$as_var+set}\" = set"; }; then
- $as_echo_n "(cached) " >&6
-fi
-ac_res=`eval 'as_val=${'$as_ac_Header'}
- $as_echo "$as_val"'`
- { $as_echo "$as_me:$LINENO: result: $ac_res" >&5
-$as_echo "$ac_res" >&6; }
-else
- # Is the header compilable?
-{ $as_echo "$as_me:$LINENO: checking $ac_header usability" >&5
-$as_echo_n "checking $ac_header usability... " >&6; }
-cat >conftest.$ac_ext <<_ACEOF
-/* confdefs.h. */
-_ACEOF
-cat confdefs.h >>conftest.$ac_ext
-cat >>conftest.$ac_ext <<_ACEOF
-/* end confdefs.h. */
-$ac_includes_default
-#include <$ac_header>
-_ACEOF
-rm -f conftest.$ac_objext
-if { (ac_try="$ac_compile"
-case "(($ac_try" in
- *\"* | *\`* | *\\*) ac_try_echo=\$ac_try;;
- *) ac_try_echo=$ac_try;;
-esac
-eval ac_try_echo="\"\$as_me:$LINENO: $ac_try_echo\""
-$as_echo "$ac_try_echo") >&5
- (eval "$ac_compile") 2>conftest.er1
- ac_status=$?
- grep -v '^ *+' conftest.er1 >conftest.err
- rm -f conftest.er1
- cat conftest.err >&5
- $as_echo "$as_me:$LINENO: \$? = $ac_status" >&5
- (exit $ac_status); } && {
- test -z "$ac_c_werror_flag" ||
- test ! -s conftest.err
- } && test -s conftest.$ac_objext; then
- ac_header_compiler=yes
-else
- $as_echo "$as_me: failed program was:" >&5
-sed 's/^/| /' conftest.$ac_ext >&5
-
- ac_header_compiler=no
-fi
-
-rm -f core conftest.err conftest.$ac_objext conftest.$ac_ext
-{ $as_echo "$as_me:$LINENO: result: $ac_header_compiler" >&5
-$as_echo "$ac_header_compiler" >&6; }
-
-# Is the header present?
-{ $as_echo "$as_me:$LINENO: checking $ac_header presence" >&5
-$as_echo_n "checking $ac_header presence... " >&6; }
-cat >conftest.$ac_ext <<_ACEOF
-/* confdefs.h. */
-_ACEOF
-cat confdefs.h >>conftest.$ac_ext
-cat >>conftest.$ac_ext <<_ACEOF
-/* end confdefs.h. */
-#include <$ac_header>
-_ACEOF
-if { (ac_try="$ac_cpp conftest.$ac_ext"
-case "(($ac_try" in
- *\"* | *\`* | *\\*) ac_try_echo=\$ac_try;;
- *) ac_try_echo=$ac_try;;
-esac
-eval ac_try_echo="\"\$as_me:$LINENO: $ac_try_echo\""
-$as_echo "$ac_try_echo") >&5
- (eval "$ac_cpp conftest.$ac_ext") 2>conftest.er1
- ac_status=$?
- grep -v '^ *+' conftest.er1 >conftest.err
- rm -f conftest.er1
- cat conftest.err >&5
- $as_echo "$as_me:$LINENO: \$? = $ac_status" >&5
- (exit $ac_status); } >/dev/null && {
- test -z "$ac_c_preproc_warn_flag$ac_c_werror_flag" ||
- test ! -s conftest.err
- }; then
- ac_header_preproc=yes
-else
- $as_echo "$as_me: failed program was:" >&5
-sed 's/^/| /' conftest.$ac_ext >&5
-
- ac_header_preproc=no
-fi
-
-rm -f conftest.err conftest.$ac_ext
-{ $as_echo "$as_me:$LINENO: result: $ac_header_preproc" >&5
-$as_echo "$ac_header_preproc" >&6; }
-
-# So? What about this header?
-case $ac_header_compiler:$ac_header_preproc:$ac_c_preproc_warn_flag in
- yes:no: )
- { $as_echo "$as_me:$LINENO: WARNING: $ac_header: accepted by the compiler, rejected by the preprocessor!" >&5
-$as_echo "$as_me: WARNING: $ac_header: accepted by the compiler, rejected by the preprocessor!" >&2;}
- { $as_echo "$as_me:$LINENO: WARNING: $ac_header: proceeding with the compiler's result" >&5
-$as_echo "$as_me: WARNING: $ac_header: proceeding with the compiler's result" >&2;}
- ac_header_preproc=yes
- ;;
- no:yes:* )
- { $as_echo "$as_me:$LINENO: WARNING: $ac_header: present but cannot be compiled" >&5
-$as_echo "$as_me: WARNING: $ac_header: present but cannot be compiled" >&2;}
- { $as_echo "$as_me:$LINENO: WARNING: $ac_header: check for missing prerequisite headers?" >&5
-$as_echo "$as_me: WARNING: $ac_header: check for missing prerequisite headers?" >&2;}
- { $as_echo "$as_me:$LINENO: WARNING: $ac_header: see the Autoconf documentation" >&5
-$as_echo "$as_me: WARNING: $ac_header: see the Autoconf documentation" >&2;}
- { $as_echo "$as_me:$LINENO: WARNING: $ac_header: section \"Present But Cannot Be Compiled\"" >&5
-$as_echo "$as_me: WARNING: $ac_header: section \"Present But Cannot Be Compiled\"" >&2;}
- { $as_echo "$as_me:$LINENO: WARNING: $ac_header: proceeding with the preprocessor's result" >&5
-$as_echo "$as_me: WARNING: $ac_header: proceeding with the preprocessor's result" >&2;}
- { $as_echo "$as_me:$LINENO: WARNING: $ac_header: in the future, the compiler will take precedence" >&5
-$as_echo "$as_me: WARNING: $ac_header: in the future, the compiler will take precedence" >&2;}
- ( cat <<\_ASBOX
-## --------------------------------------- ##
-## Report this to lasse.collin@tukaani.org ##
-## --------------------------------------- ##
-_ASBOX
- ) | sed "s/^/$as_me: WARNING: /" >&2
- ;;
-esac
-{ $as_echo "$as_me:$LINENO: checking for $ac_header" >&5
-$as_echo_n "checking for $ac_header... " >&6; }
-if { as_var=$as_ac_Header; eval "test \"\${$as_var+set}\" = set"; }; then
- $as_echo_n "(cached) " >&6
-else
- eval "$as_ac_Header=\$ac_header_preproc"
-fi
-ac_res=`eval 'as_val=${'$as_ac_Header'}
- $as_echo "$as_val"'`
- { $as_echo "$as_me:$LINENO: result: $ac_res" >&5
-$as_echo "$ac_res" >&6; }
-
-fi
-if test `eval 'as_val=${'$as_ac_Header'}
- $as_echo "$as_val"'` = yes; then
- cat >>confdefs.h <<_ACEOF
-#define `$as_echo "HAVE_$ac_header" | $as_tr_cpp` 1
-_ACEOF
-
-fi
-
-done
-
-ac_ext=cpp
-ac_cpp='$CXXCPP $CPPFLAGS'
-ac_compile='$CXX -c $CXXFLAGS $CPPFLAGS conftest.$ac_ext >&5'
-ac_link='$CXX -o conftest$ac_exeext $CXXFLAGS $CPPFLAGS $LDFLAGS conftest.$ac_ext $LIBS >&5'
-ac_compiler_gnu=$ac_cv_cxx_compiler_gnu
-if test -z "$CXX"; then
- if test -n "$CCC"; then
- CXX=$CCC
- else
- if test -n "$ac_tool_prefix"; then
- for ac_prog in g++ c++ gpp aCC CC cxx cc++ cl.exe FCC KCC RCC xlC_r xlC
- do
- # Extract the first word of "$ac_tool_prefix$ac_prog", so it can be a program name with args.
-set dummy $ac_tool_prefix$ac_prog; ac_word=$2
-{ $as_echo "$as_me:$LINENO: checking for $ac_word" >&5
-$as_echo_n "checking for $ac_word... " >&6; }
-if test "${ac_cv_prog_CXX+set}" = set; then
- $as_echo_n "(cached) " >&6
-else
- if test -n "$CXX"; then
- ac_cv_prog_CXX="$CXX" # Let the user override the test.
-else
-as_save_IFS=$IFS; IFS=$PATH_SEPARATOR
-for as_dir in $PATH
-do
- IFS=$as_save_IFS
- test -z "$as_dir" && as_dir=.
- for ac_exec_ext in '' $ac_executable_extensions; do
- if { test -f "$as_dir/$ac_word$ac_exec_ext" && $as_test_x "$as_dir/$ac_word$ac_exec_ext"; }; then
- ac_cv_prog_CXX="$ac_tool_prefix$ac_prog"
- $as_echo "$as_me:$LINENO: found $as_dir/$ac_word$ac_exec_ext" >&5
- break 2
- fi
-done
-done
-IFS=$as_save_IFS
-
-fi
-fi
-CXX=$ac_cv_prog_CXX
-if test -n "$CXX"; then
- { $as_echo "$as_me:$LINENO: result: $CXX" >&5
-$as_echo "$CXX" >&6; }
-else
- { $as_echo "$as_me:$LINENO: result: no" >&5
-$as_echo "no" >&6; }
-fi
-
-
- test -n "$CXX" && break
- done
-fi
-if test -z "$CXX"; then
- ac_ct_CXX=$CXX
- for ac_prog in g++ c++ gpp aCC CC cxx cc++ cl.exe FCC KCC RCC xlC_r xlC
-do
- # Extract the first word of "$ac_prog", so it can be a program name with args.
-set dummy $ac_prog; ac_word=$2
-{ $as_echo "$as_me:$LINENO: checking for $ac_word" >&5
-$as_echo_n "checking for $ac_word... " >&6; }
-if test "${ac_cv_prog_ac_ct_CXX+set}" = set; then
- $as_echo_n "(cached) " >&6
-else
- if test -n "$ac_ct_CXX"; then
- ac_cv_prog_ac_ct_CXX="$ac_ct_CXX" # Let the user override the test.
-else
-as_save_IFS=$IFS; IFS=$PATH_SEPARATOR
-for as_dir in $PATH
-do
- IFS=$as_save_IFS
- test -z "$as_dir" && as_dir=.
- for ac_exec_ext in '' $ac_executable_extensions; do
- if { test -f "$as_dir/$ac_word$ac_exec_ext" && $as_test_x "$as_dir/$ac_word$ac_exec_ext"; }; then
- ac_cv_prog_ac_ct_CXX="$ac_prog"
- $as_echo "$as_me:$LINENO: found $as_dir/$ac_word$ac_exec_ext" >&5
- break 2
- fi
-done
-done
-IFS=$as_save_IFS
-
-fi
-fi
-ac_ct_CXX=$ac_cv_prog_ac_ct_CXX
-if test -n "$ac_ct_CXX"; then
- { $as_echo "$as_me:$LINENO: result: $ac_ct_CXX" >&5
-$as_echo "$ac_ct_CXX" >&6; }
-else
- { $as_echo "$as_me:$LINENO: result: no" >&5
-$as_echo "no" >&6; }
-fi
-
-
- test -n "$ac_ct_CXX" && break
-done
-
- if test "x$ac_ct_CXX" = x; then
- CXX="g++"
- else
- case $cross_compiling:$ac_tool_warned in
-yes:)
-{ $as_echo "$as_me:$LINENO: WARNING: In the future, Autoconf will not detect cross-tools
-whose name does not start with the host triplet. If you think this
-configuration is useful to you, please write to autoconf@gnu.org." >&5
-$as_echo "$as_me: WARNING: In the future, Autoconf will not detect cross-tools
-whose name does not start with the host triplet. If you think this
-configuration is useful to you, please write to autoconf@gnu.org." >&2;}
-ac_tool_warned=yes ;;
-esac
- CXX=$ac_ct_CXX
- fi
-fi
-
- fi
-fi
-# Provide some information about the compiler.
-$as_echo "$as_me:$LINENO: checking for C++ compiler version" >&5
-set X $ac_compile
-ac_compiler=$2
-{ (ac_try="$ac_compiler --version >&5"
-case "(($ac_try" in
- *\"* | *\`* | *\\*) ac_try_echo=\$ac_try;;
- *) ac_try_echo=$ac_try;;
-esac
-eval ac_try_echo="\"\$as_me:$LINENO: $ac_try_echo\""
-$as_echo "$ac_try_echo") >&5
- (eval "$ac_compiler --version >&5") 2>&5
- ac_status=$?
- $as_echo "$as_me:$LINENO: \$? = $ac_status" >&5
- (exit $ac_status); }
-{ (ac_try="$ac_compiler -v >&5"
-case "(($ac_try" in
- *\"* | *\`* | *\\*) ac_try_echo=\$ac_try;;
- *) ac_try_echo=$ac_try;;
-esac
-eval ac_try_echo="\"\$as_me:$LINENO: $ac_try_echo\""
-$as_echo "$ac_try_echo") >&5
- (eval "$ac_compiler -v >&5") 2>&5
- ac_status=$?
- $as_echo "$as_me:$LINENO: \$? = $ac_status" >&5
- (exit $ac_status); }
-{ (ac_try="$ac_compiler -V >&5"
-case "(($ac_try" in
- *\"* | *\`* | *\\*) ac_try_echo=\$ac_try;;
- *) ac_try_echo=$ac_try;;
-esac
-eval ac_try_echo="\"\$as_me:$LINENO: $ac_try_echo\""
-$as_echo "$ac_try_echo") >&5
- (eval "$ac_compiler -V >&5") 2>&5
- ac_status=$?
- $as_echo "$as_me:$LINENO: \$? = $ac_status" >&5
- (exit $ac_status); }
-
-{ $as_echo "$as_me:$LINENO: checking whether we are using the GNU C++ compiler" >&5
-$as_echo_n "checking whether we are using the GNU C++ compiler... " >&6; }
-if test "${ac_cv_cxx_compiler_gnu+set}" = set; then
- $as_echo_n "(cached) " >&6
-else
- cat >conftest.$ac_ext <<_ACEOF
-/* confdefs.h. */
-_ACEOF
-cat confdefs.h >>conftest.$ac_ext
-cat >>conftest.$ac_ext <<_ACEOF
-/* end confdefs.h. */
-
-int
-main ()
-{
-#ifndef __GNUC__
- choke me
-#endif
-
- ;
- return 0;
-}
-_ACEOF
-rm -f conftest.$ac_objext
-if { (ac_try="$ac_compile"
-case "(($ac_try" in
- *\"* | *\`* | *\\*) ac_try_echo=\$ac_try;;
- *) ac_try_echo=$ac_try;;
-esac
-eval ac_try_echo="\"\$as_me:$LINENO: $ac_try_echo\""
-$as_echo "$ac_try_echo") >&5
- (eval "$ac_compile") 2>conftest.er1
- ac_status=$?
- grep -v '^ *+' conftest.er1 >conftest.err
- rm -f conftest.er1
- cat conftest.err >&5
- $as_echo "$as_me:$LINENO: \$? = $ac_status" >&5
- (exit $ac_status); } && {
- test -z "$ac_cxx_werror_flag" ||
- test ! -s conftest.err
- } && test -s conftest.$ac_objext; then
- ac_compiler_gnu=yes
-else
- $as_echo "$as_me: failed program was:" >&5
-sed 's/^/| /' conftest.$ac_ext >&5
-
- ac_compiler_gnu=no
-fi
-
-rm -f core conftest.err conftest.$ac_objext conftest.$ac_ext
-ac_cv_cxx_compiler_gnu=$ac_compiler_gnu
-
-fi
-{ $as_echo "$as_me:$LINENO: result: $ac_cv_cxx_compiler_gnu" >&5
-$as_echo "$ac_cv_cxx_compiler_gnu" >&6; }
-if test $ac_compiler_gnu = yes; then
- GXX=yes
-else
- GXX=
-fi
-ac_test_CXXFLAGS=${CXXFLAGS+set}
-ac_save_CXXFLAGS=$CXXFLAGS
-{ $as_echo "$as_me:$LINENO: checking whether $CXX accepts -g" >&5
-$as_echo_n "checking whether $CXX accepts -g... " >&6; }
-if test "${ac_cv_prog_cxx_g+set}" = set; then
- $as_echo_n "(cached) " >&6
-else
- ac_save_cxx_werror_flag=$ac_cxx_werror_flag
- ac_cxx_werror_flag=yes
- ac_cv_prog_cxx_g=no
- CXXFLAGS="-g"
- cat >conftest.$ac_ext <<_ACEOF
-/* confdefs.h. */
-_ACEOF
-cat confdefs.h >>conftest.$ac_ext
-cat >>conftest.$ac_ext <<_ACEOF
-/* end confdefs.h. */
-
-int
-main ()
-{
-
- ;
- return 0;
-}
-_ACEOF
-rm -f conftest.$ac_objext
-if { (ac_try="$ac_compile"
-case "(($ac_try" in
- *\"* | *\`* | *\\*) ac_try_echo=\$ac_try;;
- *) ac_try_echo=$ac_try;;
-esac
-eval ac_try_echo="\"\$as_me:$LINENO: $ac_try_echo\""
-$as_echo "$ac_try_echo") >&5
- (eval "$ac_compile") 2>conftest.er1
- ac_status=$?
- grep -v '^ *+' conftest.er1 >conftest.err
- rm -f conftest.er1
- cat conftest.err >&5
- $as_echo "$as_me:$LINENO: \$? = $ac_status" >&5
- (exit $ac_status); } && {
- test -z "$ac_cxx_werror_flag" ||
- test ! -s conftest.err
- } && test -s conftest.$ac_objext; then
- ac_cv_prog_cxx_g=yes
-else
- $as_echo "$as_me: failed program was:" >&5
-sed 's/^/| /' conftest.$ac_ext >&5
-
- CXXFLAGS=""
- cat >conftest.$ac_ext <<_ACEOF
-/* confdefs.h. */
-_ACEOF
-cat confdefs.h >>conftest.$ac_ext
-cat >>conftest.$ac_ext <<_ACEOF
-/* end confdefs.h. */
-
-int
-main ()
-{
-
- ;
- return 0;
-}
-_ACEOF
-rm -f conftest.$ac_objext
-if { (ac_try="$ac_compile"
-case "(($ac_try" in
- *\"* | *\`* | *\\*) ac_try_echo=\$ac_try;;
- *) ac_try_echo=$ac_try;;
-esac
-eval ac_try_echo="\"\$as_me:$LINENO: $ac_try_echo\""
-$as_echo "$ac_try_echo") >&5
- (eval "$ac_compile") 2>conftest.er1
- ac_status=$?
- grep -v '^ *+' conftest.er1 >conftest.err
- rm -f conftest.er1
- cat conftest.err >&5
- $as_echo "$as_me:$LINENO: \$? = $ac_status" >&5
- (exit $ac_status); } && {
- test -z "$ac_cxx_werror_flag" ||
- test ! -s conftest.err
- } && test -s conftest.$ac_objext; then
- :
-else
- $as_echo "$as_me: failed program was:" >&5
-sed 's/^/| /' conftest.$ac_ext >&5
-
- ac_cxx_werror_flag=$ac_save_cxx_werror_flag
- CXXFLAGS="-g"
- cat >conftest.$ac_ext <<_ACEOF
-/* confdefs.h. */
-_ACEOF
-cat confdefs.h >>conftest.$ac_ext
-cat >>conftest.$ac_ext <<_ACEOF
-/* end confdefs.h. */
-
-int
-main ()
-{
-
- ;
- return 0;
-}
-_ACEOF
-rm -f conftest.$ac_objext
-if { (ac_try="$ac_compile"
-case "(($ac_try" in
- *\"* | *\`* | *\\*) ac_try_echo=\$ac_try;;
- *) ac_try_echo=$ac_try;;
-esac
-eval ac_try_echo="\"\$as_me:$LINENO: $ac_try_echo\""
-$as_echo "$ac_try_echo") >&5
- (eval "$ac_compile") 2>conftest.er1
- ac_status=$?
- grep -v '^ *+' conftest.er1 >conftest.err
- rm -f conftest.er1
- cat conftest.err >&5
- $as_echo "$as_me:$LINENO: \$? = $ac_status" >&5
- (exit $ac_status); } && {
- test -z "$ac_cxx_werror_flag" ||
- test ! -s conftest.err
- } && test -s conftest.$ac_objext; then
- ac_cv_prog_cxx_g=yes
-else
- $as_echo "$as_me: failed program was:" >&5
-sed 's/^/| /' conftest.$ac_ext >&5
-
-
-fi
-
-rm -f core conftest.err conftest.$ac_objext conftest.$ac_ext
-fi
-
-rm -f core conftest.err conftest.$ac_objext conftest.$ac_ext
-fi
-
-rm -f core conftest.err conftest.$ac_objext conftest.$ac_ext
- ac_cxx_werror_flag=$ac_save_cxx_werror_flag
-fi
-{ $as_echo "$as_me:$LINENO: result: $ac_cv_prog_cxx_g" >&5
-$as_echo "$ac_cv_prog_cxx_g" >&6; }
-if test "$ac_test_CXXFLAGS" = set; then
- CXXFLAGS=$ac_save_CXXFLAGS
-elif test $ac_cv_prog_cxx_g = yes; then
- if test "$GXX" = yes; then
- CXXFLAGS="-g -O2"
- else
- CXXFLAGS="-g"
- fi
-else
- if test "$GXX" = yes; then
- CXXFLAGS="-O2"
- else
- CXXFLAGS=
- fi
-fi
-ac_ext=cpp
-ac_cpp='$CXXCPP $CPPFLAGS'
-ac_compile='$CXX -c $CXXFLAGS $CPPFLAGS conftest.$ac_ext >&5'
-ac_link='$CXX -o conftest$ac_exeext $CXXFLAGS $CPPFLAGS $LDFLAGS conftest.$ac_ext $LIBS >&5'
-ac_compiler_gnu=$ac_cv_cxx_compiler_gnu
-
-depcc="$CXX" am_compiler_list=
-
-{ $as_echo "$as_me:$LINENO: checking dependency style of $depcc" >&5
-$as_echo_n "checking dependency style of $depcc... " >&6; }
-if test "${am_cv_CXX_dependencies_compiler_type+set}" = set; then
- $as_echo_n "(cached) " >&6
-else
- if test -z "$AMDEP_TRUE" && test -f "$am_depcomp"; then
- # We make a subdir and do the tests there. Otherwise we can end up
- # making bogus files that we don't know about and never remove. For
- # instance it was reported that on HP-UX the gcc test will end up
- # making a dummy file named `D' -- because `-MD' means `put the output
- # in D'.
- mkdir conftest.dir
- # Copy depcomp to subdir because otherwise we won't find it if we're
- # using a relative directory.
- cp "$am_depcomp" conftest.dir
- cd conftest.dir
- # We will build objects and dependencies in a subdirectory because
- # it helps to detect inapplicable dependency modes. For instance
- # both Tru64's cc and ICC support -MD to output dependencies as a
- # side effect of compilation, but ICC will put the dependencies in
- # the current directory while Tru64 will put them in the object
- # directory.
- mkdir sub
-
- am_cv_CXX_dependencies_compiler_type=none
- if test "$am_compiler_list" = ""; then
- am_compiler_list=`sed -n 's/^#*\([a-zA-Z0-9]*\))$/\1/p' < ./depcomp`
- fi
- for depmode in $am_compiler_list; do
- # Setup a source with many dependencies, because some compilers
- # like to wrap large dependency lists on column 80 (with \), and
- # we should not choose a depcomp mode which is confused by this.
- #
- # We need to recreate these files for each test, as the compiler may
- # overwrite some of them when testing with obscure command lines.
- # This happens at least with the AIX C compiler.
- : > sub/conftest.c
- for i in 1 2 3 4 5 6; do
- echo '#include "conftst'$i'.h"' >> sub/conftest.c
- # Using `: > sub/conftst$i.h' creates only sub/conftst1.h with
- # Solaris 8's {/usr,}/bin/sh.
- touch sub/conftst$i.h
- done
- echo "${am__include} ${am__quote}sub/conftest.Po${am__quote}" > confmf
-
- case $depmode in
- nosideeffect)
- # after this tag, mechanisms are not by side-effect, so they'll
- # only be used when explicitly requested
- if test "x$enable_dependency_tracking" = xyes; then
- continue
- else
- break
- fi
- ;;
- none) break ;;
- esac
- # We check with `-c' and `-o' for the sake of the "dashmstdout"
- # mode. It turns out that the SunPro C++ compiler does not properly
- # handle `-M -o', and we need to detect this.
- if depmode=$depmode \
- source=sub/conftest.c object=sub/conftest.${OBJEXT-o} \
- depfile=sub/conftest.Po tmpdepfile=sub/conftest.TPo \
- $SHELL ./depcomp $depcc -c -o sub/conftest.${OBJEXT-o} sub/conftest.c \
- >/dev/null 2>conftest.err &&
- grep sub/conftst1.h sub/conftest.Po > /dev/null 2>&1 &&
- grep sub/conftst6.h sub/conftest.Po > /dev/null 2>&1 &&
- grep sub/conftest.${OBJEXT-o} sub/conftest.Po > /dev/null 2>&1 &&
- ${MAKE-make} -s -f confmf > /dev/null 2>&1; then
- # icc doesn't choke on unknown options, it will just issue warnings
- # or remarks (even with -Werror). So we grep stderr for any message
- # that says an option was ignored or not supported.
- # When given -MP, icc 7.0 and 7.1 complain thusly:
- # icc: Command line warning: ignoring option '-M'; no argument required
- # The diagnosis changed in icc 8.0:
- # icc: Command line remark: option '-MP' not supported
- if (grep 'ignoring option' conftest.err ||
- grep 'not supported' conftest.err) >/dev/null 2>&1; then :; else
- am_cv_CXX_dependencies_compiler_type=$depmode
- break
- fi
- fi
- done
-
- cd ..
- rm -rf conftest.dir
-else
- am_cv_CXX_dependencies_compiler_type=none
-fi
-
-fi
-{ $as_echo "$as_me:$LINENO: result: $am_cv_CXX_dependencies_compiler_type" >&5
-$as_echo "$am_cv_CXX_dependencies_compiler_type" >&6; }
-CXXDEPMODE=depmode=$am_cv_CXX_dependencies_compiler_type
-
- if
- test "x$enable_dependency_tracking" != xno \
- && test "$am_cv_CXX_dependencies_compiler_type" = gcc3; then
- am__fastdepCXX_TRUE=
- am__fastdepCXX_FALSE='#'
-else
- am__fastdepCXX_TRUE='#'
- am__fastdepCXX_FALSE=
-fi
-
-
-
-
-if test -n "$CXX" && ( test "X$CXX" != "Xno" &&
- ( (test "X$CXX" = "Xg++" && `g++ -v >/dev/null 2>&1` ) ||
- (test "X$CXX" != "Xg++"))) ; then
- ac_ext=cpp
-ac_cpp='$CXXCPP $CPPFLAGS'
-ac_compile='$CXX -c $CXXFLAGS $CPPFLAGS conftest.$ac_ext >&5'
-ac_link='$CXX -o conftest$ac_exeext $CXXFLAGS $CPPFLAGS $LDFLAGS conftest.$ac_ext $LIBS >&5'
-ac_compiler_gnu=$ac_cv_cxx_compiler_gnu
-{ $as_echo "$as_me:$LINENO: checking how to run the C++ preprocessor" >&5
-$as_echo_n "checking how to run the C++ preprocessor... " >&6; }
-if test -z "$CXXCPP"; then
- if test "${ac_cv_prog_CXXCPP+set}" = set; then
- $as_echo_n "(cached) " >&6
-else
- # Double quotes because CXXCPP needs to be expanded
- for CXXCPP in "$CXX -E" "/lib/cpp"
- do
- ac_preproc_ok=false
-for ac_cxx_preproc_warn_flag in '' yes
-do
- # Use a header file that comes with gcc, so configuring glibc
- # with a fresh cross-compiler works.
- # Prefer <limits.h> to <assert.h> if __STDC__ is defined, since
- # <limits.h> exists even on freestanding compilers.
- # On the NeXT, cc -E runs the code through the compiler's parser,
- # not just through cpp. "Syntax error" is here to catch this case.
- cat >conftest.$ac_ext <<_ACEOF
-/* confdefs.h. */
-_ACEOF
-cat confdefs.h >>conftest.$ac_ext
-cat >>conftest.$ac_ext <<_ACEOF
-/* end confdefs.h. */
-#ifdef __STDC__
-# include <limits.h>
-#else
-# include <assert.h>
-#endif
- Syntax error
-_ACEOF
-if { (ac_try="$ac_cpp conftest.$ac_ext"
-case "(($ac_try" in
- *\"* | *\`* | *\\*) ac_try_echo=\$ac_try;;
- *) ac_try_echo=$ac_try;;
-esac
-eval ac_try_echo="\"\$as_me:$LINENO: $ac_try_echo\""
-$as_echo "$ac_try_echo") >&5
- (eval "$ac_cpp conftest.$ac_ext") 2>conftest.er1
- ac_status=$?
- grep -v '^ *+' conftest.er1 >conftest.err
- rm -f conftest.er1
- cat conftest.err >&5
- $as_echo "$as_me:$LINENO: \$? = $ac_status" >&5
- (exit $ac_status); } >/dev/null && {
- test -z "$ac_cxx_preproc_warn_flag$ac_cxx_werror_flag" ||
- test ! -s conftest.err
- }; then
- :
-else
- $as_echo "$as_me: failed program was:" >&5
-sed 's/^/| /' conftest.$ac_ext >&5
-
- # Broken: fails on valid input.
-continue
-fi
-
-rm -f conftest.err conftest.$ac_ext
-
- # OK, works on sane cases. Now check whether nonexistent headers
- # can be detected and how.
- cat >conftest.$ac_ext <<_ACEOF
-/* confdefs.h. */
-_ACEOF
-cat confdefs.h >>conftest.$ac_ext
-cat >>conftest.$ac_ext <<_ACEOF
-/* end confdefs.h. */
-#include <ac_nonexistent.h>
-_ACEOF
-if { (ac_try="$ac_cpp conftest.$ac_ext"
-case "(($ac_try" in
- *\"* | *\`* | *\\*) ac_try_echo=\$ac_try;;
- *) ac_try_echo=$ac_try;;
-esac
-eval ac_try_echo="\"\$as_me:$LINENO: $ac_try_echo\""
-$as_echo "$ac_try_echo") >&5
- (eval "$ac_cpp conftest.$ac_ext") 2>conftest.er1
- ac_status=$?
- grep -v '^ *+' conftest.er1 >conftest.err
- rm -f conftest.er1
- cat conftest.err >&5
- $as_echo "$as_me:$LINENO: \$? = $ac_status" >&5
- (exit $ac_status); } >/dev/null && {
- test -z "$ac_cxx_preproc_warn_flag$ac_cxx_werror_flag" ||
- test ! -s conftest.err
- }; then
- # Broken: success on invalid input.
-continue
-else
- $as_echo "$as_me: failed program was:" >&5
-sed 's/^/| /' conftest.$ac_ext >&5
-
- # Passes both tests.
-ac_preproc_ok=:
-break
-fi
-
-rm -f conftest.err conftest.$ac_ext
-
-done
-# Because of `break', _AC_PREPROC_IFELSE's cleaning code was skipped.
-rm -f conftest.err conftest.$ac_ext
-if $ac_preproc_ok; then
- break
-fi
-
- done
- ac_cv_prog_CXXCPP=$CXXCPP
-
-fi
- CXXCPP=$ac_cv_prog_CXXCPP
-else
- ac_cv_prog_CXXCPP=$CXXCPP
-fi
-{ $as_echo "$as_me:$LINENO: result: $CXXCPP" >&5
-$as_echo "$CXXCPP" >&6; }
-ac_preproc_ok=false
-for ac_cxx_preproc_warn_flag in '' yes
-do
- # Use a header file that comes with gcc, so configuring glibc
- # with a fresh cross-compiler works.
- # Prefer <limits.h> to <assert.h> if __STDC__ is defined, since
- # <limits.h> exists even on freestanding compilers.
- # On the NeXT, cc -E runs the code through the compiler's parser,
- # not just through cpp. "Syntax error" is here to catch this case.
- cat >conftest.$ac_ext <<_ACEOF
-/* confdefs.h. */
-_ACEOF
-cat confdefs.h >>conftest.$ac_ext
-cat >>conftest.$ac_ext <<_ACEOF
-/* end confdefs.h. */
-#ifdef __STDC__
-# include <limits.h>
-#else
-# include <assert.h>
-#endif
- Syntax error
-_ACEOF
-if { (ac_try="$ac_cpp conftest.$ac_ext"
-case "(($ac_try" in
- *\"* | *\`* | *\\*) ac_try_echo=\$ac_try;;
- *) ac_try_echo=$ac_try;;
-esac
-eval ac_try_echo="\"\$as_me:$LINENO: $ac_try_echo\""
-$as_echo "$ac_try_echo") >&5
- (eval "$ac_cpp conftest.$ac_ext") 2>conftest.er1
- ac_status=$?
- grep -v '^ *+' conftest.er1 >conftest.err
- rm -f conftest.er1
- cat conftest.err >&5
- $as_echo "$as_me:$LINENO: \$? = $ac_status" >&5
- (exit $ac_status); } >/dev/null && {
- test -z "$ac_cxx_preproc_warn_flag$ac_cxx_werror_flag" ||
- test ! -s conftest.err
- }; then
- :
-else
- $as_echo "$as_me: failed program was:" >&5
-sed 's/^/| /' conftest.$ac_ext >&5
-
- # Broken: fails on valid input.
-continue
-fi
-
-rm -f conftest.err conftest.$ac_ext
-
- # OK, works on sane cases. Now check whether nonexistent headers
- # can be detected and how.
- cat >conftest.$ac_ext <<_ACEOF
-/* confdefs.h. */
-_ACEOF
-cat confdefs.h >>conftest.$ac_ext
-cat >>conftest.$ac_ext <<_ACEOF
-/* end confdefs.h. */
-#include <ac_nonexistent.h>
-_ACEOF
-if { (ac_try="$ac_cpp conftest.$ac_ext"
-case "(($ac_try" in
- *\"* | *\`* | *\\*) ac_try_echo=\$ac_try;;
- *) ac_try_echo=$ac_try;;
-esac
-eval ac_try_echo="\"\$as_me:$LINENO: $ac_try_echo\""
-$as_echo "$ac_try_echo") >&5
- (eval "$ac_cpp conftest.$ac_ext") 2>conftest.er1
- ac_status=$?
- grep -v '^ *+' conftest.er1 >conftest.err
- rm -f conftest.er1
- cat conftest.err >&5
- $as_echo "$as_me:$LINENO: \$? = $ac_status" >&5
- (exit $ac_status); } >/dev/null && {
- test -z "$ac_cxx_preproc_warn_flag$ac_cxx_werror_flag" ||
- test ! -s conftest.err
- }; then
- # Broken: success on invalid input.
-continue
-else
- $as_echo "$as_me: failed program was:" >&5
-sed 's/^/| /' conftest.$ac_ext >&5
-
- # Passes both tests.
-ac_preproc_ok=:
-break
-fi
-
-rm -f conftest.err conftest.$ac_ext
-
-done
-# Because of `break', _AC_PREPROC_IFELSE's cleaning code was skipped.
-rm -f conftest.err conftest.$ac_ext
-if $ac_preproc_ok; then
- :
-else
- { { $as_echo "$as_me:$LINENO: error: C++ preprocessor \"$CXXCPP\" fails sanity check
-See \`config.log' for more details." >&5
-$as_echo "$as_me: error: C++ preprocessor \"$CXXCPP\" fails sanity check
-See \`config.log' for more details." >&2;}
- { (exit 1); exit 1; }; }
-fi
-
-ac_ext=cpp
-ac_cpp='$CXXCPP $CPPFLAGS'
-ac_compile='$CXX -c $CXXFLAGS $CPPFLAGS conftest.$ac_ext >&5'
-ac_link='$CXX -o conftest$ac_exeext $CXXFLAGS $CPPFLAGS $LDFLAGS conftest.$ac_ext $LIBS >&5'
-ac_compiler_gnu=$ac_cv_cxx_compiler_gnu
-
-fi
-
-
-ac_ext=f
-ac_compile='$F77 -c $FFLAGS conftest.$ac_ext >&5'
-ac_link='$F77 -o conftest$ac_exeext $FFLAGS $LDFLAGS conftest.$ac_ext $LIBS >&5'
-ac_compiler_gnu=$ac_cv_f77_compiler_gnu
-if test -n "$ac_tool_prefix"; then
- for ac_prog in g77 xlf f77 frt pgf77 cf77 fort77 fl32 af77 xlf90 f90 pgf90 pghpf epcf90 gfortran g95 xlf95 f95 fort ifort ifc efc pgf95 lf95 ftn
- do
- # Extract the first word of "$ac_tool_prefix$ac_prog", so it can be a program name with args.
-set dummy $ac_tool_prefix$ac_prog; ac_word=$2
-{ $as_echo "$as_me:$LINENO: checking for $ac_word" >&5
-$as_echo_n "checking for $ac_word... " >&6; }
-if test "${ac_cv_prog_F77+set}" = set; then
- $as_echo_n "(cached) " >&6
-else
- if test -n "$F77"; then
- ac_cv_prog_F77="$F77" # Let the user override the test.
-else
-as_save_IFS=$IFS; IFS=$PATH_SEPARATOR
-for as_dir in $PATH
-do
- IFS=$as_save_IFS
- test -z "$as_dir" && as_dir=.
- for ac_exec_ext in '' $ac_executable_extensions; do
- if { test -f "$as_dir/$ac_word$ac_exec_ext" && $as_test_x "$as_dir/$ac_word$ac_exec_ext"; }; then
- ac_cv_prog_F77="$ac_tool_prefix$ac_prog"
- $as_echo "$as_me:$LINENO: found $as_dir/$ac_word$ac_exec_ext" >&5
- break 2
- fi
-done
-done
-IFS=$as_save_IFS
-
-fi
-fi
-F77=$ac_cv_prog_F77
-if test -n "$F77"; then
- { $as_echo "$as_me:$LINENO: result: $F77" >&5
-$as_echo "$F77" >&6; }
-else
- { $as_echo "$as_me:$LINENO: result: no" >&5
-$as_echo "no" >&6; }
-fi
-
-
- test -n "$F77" && break
- done
-fi
-if test -z "$F77"; then
- ac_ct_F77=$F77
- for ac_prog in g77 xlf f77 frt pgf77 cf77 fort77 fl32 af77 xlf90 f90 pgf90 pghpf epcf90 gfortran g95 xlf95 f95 fort ifort ifc efc pgf95 lf95 ftn
-do
- # Extract the first word of "$ac_prog", so it can be a program name with args.
-set dummy $ac_prog; ac_word=$2
-{ $as_echo "$as_me:$LINENO: checking for $ac_word" >&5
-$as_echo_n "checking for $ac_word... " >&6; }
-if test "${ac_cv_prog_ac_ct_F77+set}" = set; then
- $as_echo_n "(cached) " >&6
-else
- if test -n "$ac_ct_F77"; then
- ac_cv_prog_ac_ct_F77="$ac_ct_F77" # Let the user override the test.
-else
-as_save_IFS=$IFS; IFS=$PATH_SEPARATOR
-for as_dir in $PATH
-do
- IFS=$as_save_IFS
- test -z "$as_dir" && as_dir=.
- for ac_exec_ext in '' $ac_executable_extensions; do
- if { test -f "$as_dir/$ac_word$ac_exec_ext" && $as_test_x "$as_dir/$ac_word$ac_exec_ext"; }; then
- ac_cv_prog_ac_ct_F77="$ac_prog"
- $as_echo "$as_me:$LINENO: found $as_dir/$ac_word$ac_exec_ext" >&5
- break 2
- fi
-done
-done
-IFS=$as_save_IFS
-
-fi
-fi
-ac_ct_F77=$ac_cv_prog_ac_ct_F77
-if test -n "$ac_ct_F77"; then
- { $as_echo "$as_me:$LINENO: result: $ac_ct_F77" >&5
-$as_echo "$ac_ct_F77" >&6; }
-else
- { $as_echo "$as_me:$LINENO: result: no" >&5
-$as_echo "no" >&6; }
-fi
-
-
- test -n "$ac_ct_F77" && break
-done
-
- if test "x$ac_ct_F77" = x; then
- F77=""
- else
- case $cross_compiling:$ac_tool_warned in
-yes:)
-{ $as_echo "$as_me:$LINENO: WARNING: In the future, Autoconf will not detect cross-tools
-whose name does not start with the host triplet. If you think this
-configuration is useful to you, please write to autoconf@gnu.org." >&5
-$as_echo "$as_me: WARNING: In the future, Autoconf will not detect cross-tools
-whose name does not start with the host triplet. If you think this
-configuration is useful to you, please write to autoconf@gnu.org." >&2;}
-ac_tool_warned=yes ;;
-esac
- F77=$ac_ct_F77
- fi
-fi
-
-
-# Provide some information about the compiler.
-$as_echo "$as_me:$LINENO: checking for Fortran 77 compiler version" >&5
-set X $ac_compile
-ac_compiler=$2
-{ (ac_try="$ac_compiler --version >&5"
-case "(($ac_try" in
- *\"* | *\`* | *\\*) ac_try_echo=\$ac_try;;
- *) ac_try_echo=$ac_try;;
-esac
-eval ac_try_echo="\"\$as_me:$LINENO: $ac_try_echo\""
-$as_echo "$ac_try_echo") >&5
- (eval "$ac_compiler --version >&5") 2>&5
- ac_status=$?
- $as_echo "$as_me:$LINENO: \$? = $ac_status" >&5
- (exit $ac_status); }
-{ (ac_try="$ac_compiler -v >&5"
-case "(($ac_try" in
- *\"* | *\`* | *\\*) ac_try_echo=\$ac_try;;
- *) ac_try_echo=$ac_try;;
-esac
-eval ac_try_echo="\"\$as_me:$LINENO: $ac_try_echo\""
-$as_echo "$ac_try_echo") >&5
- (eval "$ac_compiler -v >&5") 2>&5
- ac_status=$?
- $as_echo "$as_me:$LINENO: \$? = $ac_status" >&5
- (exit $ac_status); }
-{ (ac_try="$ac_compiler -V >&5"
-case "(($ac_try" in
- *\"* | *\`* | *\\*) ac_try_echo=\$ac_try;;
- *) ac_try_echo=$ac_try;;
-esac
-eval ac_try_echo="\"\$as_me:$LINENO: $ac_try_echo\""
-$as_echo "$ac_try_echo") >&5
- (eval "$ac_compiler -V >&5") 2>&5
- ac_status=$?
- $as_echo "$as_me:$LINENO: \$? = $ac_status" >&5
- (exit $ac_status); }
-rm -f a.out
-
-# If we don't use `.F' as extension, the preprocessor is not run on the
-# input file. (Note that this only needs to work for GNU compilers.)
-ac_save_ext=$ac_ext
-ac_ext=F
-{ $as_echo "$as_me:$LINENO: checking whether we are using the GNU Fortran 77 compiler" >&5
-$as_echo_n "checking whether we are using the GNU Fortran 77 compiler... " >&6; }
-if test "${ac_cv_f77_compiler_gnu+set}" = set; then
- $as_echo_n "(cached) " >&6
-else
- cat >conftest.$ac_ext <<_ACEOF
- program main
-#ifndef __GNUC__
- choke me
-#endif
-
- end
-_ACEOF
-rm -f conftest.$ac_objext
-if { (ac_try="$ac_compile"
-case "(($ac_try" in
- *\"* | *\`* | *\\*) ac_try_echo=\$ac_try;;
- *) ac_try_echo=$ac_try;;
-esac
-eval ac_try_echo="\"\$as_me:$LINENO: $ac_try_echo\""
-$as_echo "$ac_try_echo") >&5
- (eval "$ac_compile") 2>conftest.er1
- ac_status=$?
- grep -v '^ *+' conftest.er1 >conftest.err
- rm -f conftest.er1
- cat conftest.err >&5
- $as_echo "$as_me:$LINENO: \$? = $ac_status" >&5
- (exit $ac_status); } && {
- test -z "$ac_f77_werror_flag" ||
- test ! -s conftest.err
- } && test -s conftest.$ac_objext; then
- ac_compiler_gnu=yes
-else
- $as_echo "$as_me: failed program was:" >&5
-sed 's/^/| /' conftest.$ac_ext >&5
-
- ac_compiler_gnu=no
-fi
-
-rm -f core conftest.err conftest.$ac_objext conftest.$ac_ext
-ac_cv_f77_compiler_gnu=$ac_compiler_gnu
-
-fi
-{ $as_echo "$as_me:$LINENO: result: $ac_cv_f77_compiler_gnu" >&5
-$as_echo "$ac_cv_f77_compiler_gnu" >&6; }
-ac_ext=$ac_save_ext
-ac_test_FFLAGS=${FFLAGS+set}
-ac_save_FFLAGS=$FFLAGS
-FFLAGS=
-{ $as_echo "$as_me:$LINENO: checking whether $F77 accepts -g" >&5
-$as_echo_n "checking whether $F77 accepts -g... " >&6; }
-if test "${ac_cv_prog_f77_g+set}" = set; then
- $as_echo_n "(cached) " >&6
-else
- FFLAGS=-g
-cat >conftest.$ac_ext <<_ACEOF
- program main
-
- end
-_ACEOF
-rm -f conftest.$ac_objext
-if { (ac_try="$ac_compile"
-case "(($ac_try" in
- *\"* | *\`* | *\\*) ac_try_echo=\$ac_try;;
- *) ac_try_echo=$ac_try;;
-esac
-eval ac_try_echo="\"\$as_me:$LINENO: $ac_try_echo\""
-$as_echo "$ac_try_echo") >&5
- (eval "$ac_compile") 2>conftest.er1
- ac_status=$?
- grep -v '^ *+' conftest.er1 >conftest.err
- rm -f conftest.er1
- cat conftest.err >&5
- $as_echo "$as_me:$LINENO: \$? = $ac_status" >&5
- (exit $ac_status); } && {
- test -z "$ac_f77_werror_flag" ||
- test ! -s conftest.err
- } && test -s conftest.$ac_objext; then
- ac_cv_prog_f77_g=yes
-else
- $as_echo "$as_me: failed program was:" >&5
-sed 's/^/| /' conftest.$ac_ext >&5
-
- ac_cv_prog_f77_g=no
-fi
-
-rm -f core conftest.err conftest.$ac_objext conftest.$ac_ext
-
-fi
-{ $as_echo "$as_me:$LINENO: result: $ac_cv_prog_f77_g" >&5
-$as_echo "$ac_cv_prog_f77_g" >&6; }
-if test "$ac_test_FFLAGS" = set; then
- FFLAGS=$ac_save_FFLAGS
-elif test $ac_cv_prog_f77_g = yes; then
- if test "x$ac_cv_f77_compiler_gnu" = xyes; then
- FFLAGS="-g -O2"
- else
- FFLAGS="-g"
- fi
-else
- if test "x$ac_cv_f77_compiler_gnu" = xyes; then
- FFLAGS="-O2"
- else
- FFLAGS=
- fi
-fi
-
-if test $ac_compiler_gnu = yes; then
- G77=yes
-else
- G77=
-fi
-ac_ext=c
-ac_cpp='$CPP $CPPFLAGS'
-ac_compile='$CC -c $CFLAGS $CPPFLAGS conftest.$ac_ext >&5'
-ac_link='$CC -o conftest$ac_exeext $CFLAGS $CPPFLAGS $LDFLAGS conftest.$ac_ext $LIBS >&5'
-ac_compiler_gnu=$ac_cv_c_compiler_gnu
-
-
-
-# Autoconf 2.13's AC_OBJEXT and AC_EXEEXT macros only works for C compilers!
-# find the maximum length of command line arguments
-{ $as_echo "$as_me:$LINENO: checking the maximum length of command line arguments" >&5
-$as_echo_n "checking the maximum length of command line arguments... " >&6; }
-if test "${lt_cv_sys_max_cmd_len+set}" = set; then
- $as_echo_n "(cached) " >&6
-else
- i=0
- teststring="ABCD"
-
- case $build_os in
- msdosdjgpp*)
- # On DJGPP, this test can blow up pretty badly due to problems in libc
- # (any single argument exceeding 2000 bytes causes a buffer overrun
- # during glob expansion). Even if it were fixed, the result of this
- # check would be larger than it should be.
- lt_cv_sys_max_cmd_len=12288; # 12K is about right
- ;;
-
- gnu*)
- # Under GNU Hurd, this test is not required because there is
- # no limit to the length of command line arguments.
- # Libtool will interpret -1 as no limit whatsoever
- lt_cv_sys_max_cmd_len=-1;
- ;;
-
- cygwin* | mingw*)
- # On Win9x/ME, this test blows up -- it succeeds, but takes
- # about 5 minutes as the teststring grows exponentially.
- # Worse, since 9x/ME are not pre-emptively multitasking,
- # you end up with a "frozen" computer, even though with patience
- # the test eventually succeeds (with a max line length of 256k).
- # Instead, let's just punt: use the minimum linelength reported by
- # all of the supported platforms: 8192 (on NT/2K/XP).
- lt_cv_sys_max_cmd_len=8192;
- ;;
-
- amigaos*)
- # On AmigaOS with pdksh, this test takes hours, literally.
- # So we just punt and use a minimum line length of 8192.
- lt_cv_sys_max_cmd_len=8192;
- ;;
-
- netbsd* | freebsd* | openbsd* | darwin* | dragonfly*)
- # This has been around since 386BSD, at least. Likely further.
- if test -x /sbin/sysctl; then
- lt_cv_sys_max_cmd_len=`/sbin/sysctl -n kern.argmax`
- elif test -x /usr/sbin/sysctl; then
- lt_cv_sys_max_cmd_len=`/usr/sbin/sysctl -n kern.argmax`
- else
- lt_cv_sys_max_cmd_len=65536 # usable default for all BSDs
- fi
- # And add a safety zone
- lt_cv_sys_max_cmd_len=`expr $lt_cv_sys_max_cmd_len \/ 4`
- lt_cv_sys_max_cmd_len=`expr $lt_cv_sys_max_cmd_len \* 3`
- ;;
-
- interix*)
- # We know the value 262144 and hardcode it with a safety zone (like BSD)
- lt_cv_sys_max_cmd_len=196608
- ;;
-
- osf*)
- # Dr. Hans Ekkehard Plesser reports seeing a kernel panic running configure
- # due to this test when exec_disable_arg_limit is 1 on Tru64. It is not
- # nice to cause kernel panics so lets avoid the loop below.
- # First set a reasonable default.
- lt_cv_sys_max_cmd_len=16384
- #
- if test -x /sbin/sysconfig; then
- case `/sbin/sysconfig -q proc exec_disable_arg_limit` in
- *1*) lt_cv_sys_max_cmd_len=-1 ;;
- esac
- fi
- ;;
- sco3.2v5*)
- lt_cv_sys_max_cmd_len=102400
- ;;
- sysv5* | sco5v6* | sysv4.2uw2*)
- kargmax=`grep ARG_MAX /etc/conf/cf.d/stune 2>/dev/null`
- if test -n "$kargmax"; then
- lt_cv_sys_max_cmd_len=`echo $kargmax | sed 's/.*[ ]//'`
- else
- lt_cv_sys_max_cmd_len=32768
- fi
- ;;
- *)
- lt_cv_sys_max_cmd_len=`(getconf ARG_MAX) 2> /dev/null`
- if test -n "$lt_cv_sys_max_cmd_len"; then
- lt_cv_sys_max_cmd_len=`expr $lt_cv_sys_max_cmd_len \/ 4`
- lt_cv_sys_max_cmd_len=`expr $lt_cv_sys_max_cmd_len \* 3`
- else
- SHELL=${SHELL-${CONFIG_SHELL-/bin/sh}}
- while (test "X"`$SHELL $0 --fallback-echo "X$teststring" 2>/dev/null` \
- = "XX$teststring") >/dev/null 2>&1 &&
- new_result=`expr "X$teststring" : ".*" 2>&1` &&
- lt_cv_sys_max_cmd_len=$new_result &&
- test $i != 17 # 1/2 MB should be enough
- do
- i=`expr $i + 1`
- teststring=$teststring$teststring
- done
- teststring=
- # Add a significant safety factor because C++ compilers can tack on massive
- # amounts of additional arguments before passing them to the linker.
- # It appears as though 1/2 is a usable value.
- lt_cv_sys_max_cmd_len=`expr $lt_cv_sys_max_cmd_len \/ 2`
- fi
- ;;
- esac
-
-fi
-
-if test -n $lt_cv_sys_max_cmd_len ; then
- { $as_echo "$as_me:$LINENO: result: $lt_cv_sys_max_cmd_len" >&5
-$as_echo "$lt_cv_sys_max_cmd_len" >&6; }
-else
- { $as_echo "$as_me:$LINENO: result: none" >&5
-$as_echo "none" >&6; }
-fi
-
-
-
-
-
-# Check for command to grab the raw symbol name followed by C symbol from nm.
-{ $as_echo "$as_me:$LINENO: checking command to parse $NM output from $compiler object" >&5
-$as_echo_n "checking command to parse $NM output from $compiler object... " >&6; }
-if test "${lt_cv_sys_global_symbol_pipe+set}" = set; then
- $as_echo_n "(cached) " >&6
-else
-
-# These are sane defaults that work on at least a few old systems.
-# [They come from Ultrix. What could be older than Ultrix?!! ;)]
-
-# Character class describing NM global symbol codes.
-symcode='[BCDEGRST]'
-
-# Regexp to match symbols that can be accessed directly from C.
-sympat='\([_A-Za-z][_A-Za-z0-9]*\)'
-
-# Transform an extracted symbol line into a proper C declaration
-lt_cv_sys_global_symbol_to_cdecl="sed -n -e 's/^. .* \(.*\)$/extern int \1;/p'"
-
-# Transform an extracted symbol line into symbol name and symbol address
-lt_cv_sys_global_symbol_to_c_name_address="sed -n -e 's/^: \([^ ]*\) $/ {\\\"\1\\\", (lt_ptr) 0},/p' -e 's/^$symcode \([^ ]*\) \([^ ]*\)$/ {\"\2\", (lt_ptr) \&\2},/p'"
-
-# Define system-specific variables.
-case $host_os in
-aix*)
- symcode='[BCDT]'
- ;;
-cygwin* | mingw* | pw32*)
- symcode='[ABCDGISTW]'
- ;;
-hpux*) # Its linker distinguishes data from code symbols
- if test "$host_cpu" = ia64; then
- symcode='[ABCDEGRST]'
- fi
- lt_cv_sys_global_symbol_to_cdecl="sed -n -e 's/^T .* \(.*\)$/extern int \1();/p' -e 's/^$symcode* .* \(.*\)$/extern char \1;/p'"
- lt_cv_sys_global_symbol_to_c_name_address="sed -n -e 's/^: \([^ ]*\) $/ {\\\"\1\\\", (lt_ptr) 0},/p' -e 's/^$symcode* \([^ ]*\) \([^ ]*\)$/ {\"\2\", (lt_ptr) \&\2},/p'"
- ;;
-linux* | k*bsd*-gnu)
- if test "$host_cpu" = ia64; then
- symcode='[ABCDGIRSTW]'
- lt_cv_sys_global_symbol_to_cdecl="sed -n -e 's/^T .* \(.*\)$/extern int \1();/p' -e 's/^$symcode* .* \(.*\)$/extern char \1;/p'"
- lt_cv_sys_global_symbol_to_c_name_address="sed -n -e 's/^: \([^ ]*\) $/ {\\\"\1\\\", (lt_ptr) 0},/p' -e 's/^$symcode* \([^ ]*\) \([^ ]*\)$/ {\"\2\", (lt_ptr) \&\2},/p'"
- fi
- ;;
-irix* | nonstopux*)
- symcode='[BCDEGRST]'
- ;;
-osf*)
- symcode='[BCDEGQRST]'
- ;;
-solaris*)
- symcode='[BDRT]'
- ;;
-sco3.2v5*)
- symcode='[DT]'
- ;;
-sysv4.2uw2*)
- symcode='[DT]'
- ;;
-sysv5* | sco5v6* | unixware* | OpenUNIX*)
- symcode='[ABDT]'
- ;;
-sysv4)
- symcode='[DFNSTU]'
- ;;
-esac
-
-# Handle CRLF in mingw tool chain
-opt_cr=
-case $build_os in
-mingw*)
- opt_cr=`echo 'x\{0,1\}' | tr x '\015'` # option cr in regexp
- ;;
-esac
-
-# If we're using GNU nm, then use its standard symbol codes.
-case `$NM -V 2>&1` in
-*GNU* | *'with BFD'*)
- symcode='[ABCDGIRSTW]' ;;
-esac
-
-# Try without a prefix undercore, then with it.
-for ac_symprfx in "" "_"; do
-
- # Transform symcode, sympat, and symprfx into a raw symbol and a C symbol.
- symxfrm="\\1 $ac_symprfx\\2 \\2"
-
- # Write the raw and C identifiers.
- lt_cv_sys_global_symbol_pipe="sed -n -e 's/^.*[ ]\($symcode$symcode*\)[ ][ ]*$ac_symprfx$sympat$opt_cr$/$symxfrm/p'"
-
- # Check to see that the pipe works correctly.
- pipe_works=no
-
- rm -f conftest*
- cat > conftest.$ac_ext <<EOF
-#ifdef __cplusplus
-extern "C" {
-#endif
-char nm_test_var;
-void nm_test_func(){}
-#ifdef __cplusplus
-}
-#endif
-int main(){nm_test_var='a';nm_test_func();return(0);}
-EOF
-
- if { (eval echo "$as_me:$LINENO: \"$ac_compile\"") >&5
- (eval $ac_compile) 2>&5
- ac_status=$?
- $as_echo "$as_me:$LINENO: \$? = $ac_status" >&5
- (exit $ac_status); }; then
- # Now try to grab the symbols.
- nlist=conftest.nm
- if { (eval echo "$as_me:$LINENO: \"$NM conftest.$ac_objext \| $lt_cv_sys_global_symbol_pipe \> $nlist\"") >&5
- (eval $NM conftest.$ac_objext \| $lt_cv_sys_global_symbol_pipe \> $nlist) 2>&5
- ac_status=$?
- $as_echo "$as_me:$LINENO: \$? = $ac_status" >&5
- (exit $ac_status); } && test -s "$nlist"; then
- # Try sorting and uniquifying the output.
- if sort "$nlist" | uniq > "$nlist"T; then
- mv -f "$nlist"T "$nlist"
- else
- rm -f "$nlist"T
- fi
-
- # Make sure that we snagged all the symbols we need.
- if grep ' nm_test_var$' "$nlist" >/dev/null; then
- if grep ' nm_test_func$' "$nlist" >/dev/null; then
- cat <<EOF > conftest.$ac_ext
-#ifdef __cplusplus
-extern "C" {
-#endif
-
-EOF
- # Now generate the symbol file.
- eval "$lt_cv_sys_global_symbol_to_cdecl"' < "$nlist" | grep -v main >> conftest.$ac_ext'
-
- cat <<EOF >> conftest.$ac_ext
-#if defined (__STDC__) && __STDC__
-# define lt_ptr_t void *
-#else
-# define lt_ptr_t char *
-# define const
-#endif
-
-/* The mapping between symbol names and symbols. */
-const struct {
- const char *name;
- lt_ptr_t address;
-}
-lt_preloaded_symbols[] =
-{
-EOF
- $SED "s/^$symcode$symcode* \(.*\) \(.*\)$/ {\"\2\", (lt_ptr_t) \&\2},/" < "$nlist" | grep -v main >> conftest.$ac_ext
- cat <<\EOF >> conftest.$ac_ext
- {0, (lt_ptr_t) 0}
-};
-
-#ifdef __cplusplus
-}
-#endif
-EOF
- # Now try linking the two files.
- mv conftest.$ac_objext conftstm.$ac_objext
- lt_save_LIBS="$LIBS"
- lt_save_CFLAGS="$CFLAGS"
- LIBS="conftstm.$ac_objext"
- CFLAGS="$CFLAGS$lt_prog_compiler_no_builtin_flag"
- if { (eval echo "$as_me:$LINENO: \"$ac_link\"") >&5
- (eval $ac_link) 2>&5
- ac_status=$?
- $as_echo "$as_me:$LINENO: \$? = $ac_status" >&5
- (exit $ac_status); } && test -s conftest${ac_exeext}; then
- pipe_works=yes
- fi
- LIBS="$lt_save_LIBS"
- CFLAGS="$lt_save_CFLAGS"
- else
- echo "cannot find nm_test_func in $nlist" >&5
- fi
- else
- echo "cannot find nm_test_var in $nlist" >&5
- fi
- else
- echo "cannot run $lt_cv_sys_global_symbol_pipe" >&5
- fi
- else
- echo "$progname: failed program was:" >&5
- cat conftest.$ac_ext >&5
- fi
- rm -rf conftest* conftst*
-
- # Do not use the global_symbol_pipe unless it works.
- if test "$pipe_works" = yes; then
- break
- else
- lt_cv_sys_global_symbol_pipe=
- fi
-done
-
-fi
-
-if test -z "$lt_cv_sys_global_symbol_pipe"; then
- lt_cv_sys_global_symbol_to_cdecl=
-fi
-if test -z "$lt_cv_sys_global_symbol_pipe$lt_cv_sys_global_symbol_to_cdecl"; then
- { $as_echo "$as_me:$LINENO: result: failed" >&5
-$as_echo "failed" >&6; }
-else
- { $as_echo "$as_me:$LINENO: result: ok" >&5
-$as_echo "ok" >&6; }
-fi
-
-{ $as_echo "$as_me:$LINENO: checking for objdir" >&5
-$as_echo_n "checking for objdir... " >&6; }
-if test "${lt_cv_objdir+set}" = set; then
- $as_echo_n "(cached) " >&6
-else
- rm -f .libs 2>/dev/null
-mkdir .libs 2>/dev/null
-if test -d .libs; then
- lt_cv_objdir=.libs
-else
- # MS-DOS does not allow filenames that begin with a dot.
- lt_cv_objdir=_libs
-fi
-rmdir .libs 2>/dev/null
-fi
-{ $as_echo "$as_me:$LINENO: result: $lt_cv_objdir" >&5
-$as_echo "$lt_cv_objdir" >&6; }
-objdir=$lt_cv_objdir
-
-
-
-
-
-case $host_os in
-aix3*)
- # AIX sometimes has problems with the GCC collect2 program. For some
- # reason, if we set the COLLECT_NAMES environment variable, the problems
- # vanish in a puff of smoke.
- if test "X${COLLECT_NAMES+set}" != Xset; then
- COLLECT_NAMES=
- export COLLECT_NAMES
- fi
- ;;
-esac
-
-# Sed substitution that helps us do robust quoting. It backslashifies
-# metacharacters that are still active within double-quoted strings.
-Xsed='sed -e 1s/^X//'
-sed_quote_subst='s/\([\\"\\`$\\\\]\)/\\\1/g'
-
-# Same as above, but do not quote variable references.
-double_quote_subst='s/\([\\"\\`\\\\]\)/\\\1/g'
-
-# Sed substitution to delay expansion of an escaped shell variable in a
-# double_quote_subst'ed string.
-delay_variable_subst='s/\\\\\\\\\\\$/\\\\\\$/g'
-
-# Sed substitution to avoid accidental globbing in evaled expressions
-no_glob_subst='s/\*/\\\*/g'
-
-# Constants:
-rm="rm -f"
-
-# Global variables:
-default_ofile=libtool
-can_build_shared=yes
-
-# All known linkers require a `.a' archive for static linking (except MSVC,
-# which needs '.lib').
-libext=a
-ltmain="$ac_aux_dir/ltmain.sh"
-ofile="$default_ofile"
-with_gnu_ld="$lt_cv_prog_gnu_ld"
-
-if test -n "$ac_tool_prefix"; then
- # Extract the first word of "${ac_tool_prefix}ar", so it can be a program name with args.
-set dummy ${ac_tool_prefix}ar; ac_word=$2
-{ $as_echo "$as_me:$LINENO: checking for $ac_word" >&5
-$as_echo_n "checking for $ac_word... " >&6; }
-if test "${ac_cv_prog_AR+set}" = set; then
- $as_echo_n "(cached) " >&6
-else
- if test -n "$AR"; then
- ac_cv_prog_AR="$AR" # Let the user override the test.
-else
-as_save_IFS=$IFS; IFS=$PATH_SEPARATOR
-for as_dir in $PATH
-do
- IFS=$as_save_IFS
- test -z "$as_dir" && as_dir=.
- for ac_exec_ext in '' $ac_executable_extensions; do
- if { test -f "$as_dir/$ac_word$ac_exec_ext" && $as_test_x "$as_dir/$ac_word$ac_exec_ext"; }; then
- ac_cv_prog_AR="${ac_tool_prefix}ar"
- $as_echo "$as_me:$LINENO: found $as_dir/$ac_word$ac_exec_ext" >&5
- break 2
- fi
-done
-done
-IFS=$as_save_IFS
-
-fi
-fi
-AR=$ac_cv_prog_AR
-if test -n "$AR"; then
- { $as_echo "$as_me:$LINENO: result: $AR" >&5
-$as_echo "$AR" >&6; }
-else
- { $as_echo "$as_me:$LINENO: result: no" >&5
-$as_echo "no" >&6; }
-fi
-
-
-fi
-if test -z "$ac_cv_prog_AR"; then
- ac_ct_AR=$AR
- # Extract the first word of "ar", so it can be a program name with args.
-set dummy ar; ac_word=$2
-{ $as_echo "$as_me:$LINENO: checking for $ac_word" >&5
-$as_echo_n "checking for $ac_word... " >&6; }
-if test "${ac_cv_prog_ac_ct_AR+set}" = set; then
- $as_echo_n "(cached) " >&6
-else
- if test -n "$ac_ct_AR"; then
- ac_cv_prog_ac_ct_AR="$ac_ct_AR" # Let the user override the test.
-else
-as_save_IFS=$IFS; IFS=$PATH_SEPARATOR
-for as_dir in $PATH
-do
- IFS=$as_save_IFS
- test -z "$as_dir" && as_dir=.
- for ac_exec_ext in '' $ac_executable_extensions; do
- if { test -f "$as_dir/$ac_word$ac_exec_ext" && $as_test_x "$as_dir/$ac_word$ac_exec_ext"; }; then
- ac_cv_prog_ac_ct_AR="ar"
- $as_echo "$as_me:$LINENO: found $as_dir/$ac_word$ac_exec_ext" >&5
- break 2
- fi
-done
-done
-IFS=$as_save_IFS
-
-fi
-fi
-ac_ct_AR=$ac_cv_prog_ac_ct_AR
-if test -n "$ac_ct_AR"; then
- { $as_echo "$as_me:$LINENO: result: $ac_ct_AR" >&5
-$as_echo "$ac_ct_AR" >&6; }
-else
- { $as_echo "$as_me:$LINENO: result: no" >&5
-$as_echo "no" >&6; }
-fi
-
- if test "x$ac_ct_AR" = x; then
- AR="false"
- else
- case $cross_compiling:$ac_tool_warned in
-yes:)
-{ $as_echo "$as_me:$LINENO: WARNING: In the future, Autoconf will not detect cross-tools
-whose name does not start with the host triplet. If you think this
-configuration is useful to you, please write to autoconf@gnu.org." >&5
-$as_echo "$as_me: WARNING: In the future, Autoconf will not detect cross-tools
-whose name does not start with the host triplet. If you think this
-configuration is useful to you, please write to autoconf@gnu.org." >&2;}
-ac_tool_warned=yes ;;
-esac
- AR=$ac_ct_AR
- fi
-else
- AR="$ac_cv_prog_AR"
-fi
-
-if test -n "$ac_tool_prefix"; then
- # Extract the first word of "${ac_tool_prefix}ranlib", so it can be a program name with args.
-set dummy ${ac_tool_prefix}ranlib; ac_word=$2
-{ $as_echo "$as_me:$LINENO: checking for $ac_word" >&5
-$as_echo_n "checking for $ac_word... " >&6; }
-if test "${ac_cv_prog_RANLIB+set}" = set; then
- $as_echo_n "(cached) " >&6
-else
- if test -n "$RANLIB"; then
- ac_cv_prog_RANLIB="$RANLIB" # Let the user override the test.
-else
-as_save_IFS=$IFS; IFS=$PATH_SEPARATOR
-for as_dir in $PATH
-do
- IFS=$as_save_IFS
- test -z "$as_dir" && as_dir=.
- for ac_exec_ext in '' $ac_executable_extensions; do
- if { test -f "$as_dir/$ac_word$ac_exec_ext" && $as_test_x "$as_dir/$ac_word$ac_exec_ext"; }; then
- ac_cv_prog_RANLIB="${ac_tool_prefix}ranlib"
- $as_echo "$as_me:$LINENO: found $as_dir/$ac_word$ac_exec_ext" >&5
- break 2
- fi
-done
-done
-IFS=$as_save_IFS
-
-fi
-fi
-RANLIB=$ac_cv_prog_RANLIB
-if test -n "$RANLIB"; then
- { $as_echo "$as_me:$LINENO: result: $RANLIB" >&5
-$as_echo "$RANLIB" >&6; }
-else
- { $as_echo "$as_me:$LINENO: result: no" >&5
-$as_echo "no" >&6; }
-fi
-
-
-fi
-if test -z "$ac_cv_prog_RANLIB"; then
- ac_ct_RANLIB=$RANLIB
- # Extract the first word of "ranlib", so it can be a program name with args.
-set dummy ranlib; ac_word=$2
-{ $as_echo "$as_me:$LINENO: checking for $ac_word" >&5
-$as_echo_n "checking for $ac_word... " >&6; }
-if test "${ac_cv_prog_ac_ct_RANLIB+set}" = set; then
- $as_echo_n "(cached) " >&6
-else
- if test -n "$ac_ct_RANLIB"; then
- ac_cv_prog_ac_ct_RANLIB="$ac_ct_RANLIB" # Let the user override the test.
-else
-as_save_IFS=$IFS; IFS=$PATH_SEPARATOR
-for as_dir in $PATH
-do
- IFS=$as_save_IFS
- test -z "$as_dir" && as_dir=.
- for ac_exec_ext in '' $ac_executable_extensions; do
- if { test -f "$as_dir/$ac_word$ac_exec_ext" && $as_test_x "$as_dir/$ac_word$ac_exec_ext"; }; then
- ac_cv_prog_ac_ct_RANLIB="ranlib"
- $as_echo "$as_me:$LINENO: found $as_dir/$ac_word$ac_exec_ext" >&5
- break 2
- fi
-done
-done
-IFS=$as_save_IFS
-
-fi
-fi
-ac_ct_RANLIB=$ac_cv_prog_ac_ct_RANLIB
-if test -n "$ac_ct_RANLIB"; then
- { $as_echo "$as_me:$LINENO: result: $ac_ct_RANLIB" >&5
-$as_echo "$ac_ct_RANLIB" >&6; }
-else
- { $as_echo "$as_me:$LINENO: result: no" >&5
-$as_echo "no" >&6; }
-fi
-
- if test "x$ac_ct_RANLIB" = x; then
- RANLIB=":"
- else
- case $cross_compiling:$ac_tool_warned in
-yes:)
-{ $as_echo "$as_me:$LINENO: WARNING: In the future, Autoconf will not detect cross-tools
-whose name does not start with the host triplet. If you think this
-configuration is useful to you, please write to autoconf@gnu.org." >&5
-$as_echo "$as_me: WARNING: In the future, Autoconf will not detect cross-tools
-whose name does not start with the host triplet. If you think this
-configuration is useful to you, please write to autoconf@gnu.org." >&2;}
-ac_tool_warned=yes ;;
-esac
- RANLIB=$ac_ct_RANLIB
- fi
-else
- RANLIB="$ac_cv_prog_RANLIB"
-fi
-
-if test -n "$ac_tool_prefix"; then
- # Extract the first word of "${ac_tool_prefix}strip", so it can be a program name with args.
-set dummy ${ac_tool_prefix}strip; ac_word=$2
-{ $as_echo "$as_me:$LINENO: checking for $ac_word" >&5
-$as_echo_n "checking for $ac_word... " >&6; }
-if test "${ac_cv_prog_STRIP+set}" = set; then
- $as_echo_n "(cached) " >&6
-else
- if test -n "$STRIP"; then
- ac_cv_prog_STRIP="$STRIP" # Let the user override the test.
-else
-as_save_IFS=$IFS; IFS=$PATH_SEPARATOR
-for as_dir in $PATH
-do
- IFS=$as_save_IFS
- test -z "$as_dir" && as_dir=.
- for ac_exec_ext in '' $ac_executable_extensions; do
- if { test -f "$as_dir/$ac_word$ac_exec_ext" && $as_test_x "$as_dir/$ac_word$ac_exec_ext"; }; then
- ac_cv_prog_STRIP="${ac_tool_prefix}strip"
- $as_echo "$as_me:$LINENO: found $as_dir/$ac_word$ac_exec_ext" >&5
- break 2
- fi
-done
-done
-IFS=$as_save_IFS
-
-fi
-fi
-STRIP=$ac_cv_prog_STRIP
-if test -n "$STRIP"; then
- { $as_echo "$as_me:$LINENO: result: $STRIP" >&5
-$as_echo "$STRIP" >&6; }
-else
- { $as_echo "$as_me:$LINENO: result: no" >&5
-$as_echo "no" >&6; }
-fi
-
-
-fi
-if test -z "$ac_cv_prog_STRIP"; then
- ac_ct_STRIP=$STRIP
- # Extract the first word of "strip", so it can be a program name with args.
-set dummy strip; ac_word=$2
-{ $as_echo "$as_me:$LINENO: checking for $ac_word" >&5
-$as_echo_n "checking for $ac_word... " >&6; }
-if test "${ac_cv_prog_ac_ct_STRIP+set}" = set; then
- $as_echo_n "(cached) " >&6
-else
- if test -n "$ac_ct_STRIP"; then
- ac_cv_prog_ac_ct_STRIP="$ac_ct_STRIP" # Let the user override the test.
-else
-as_save_IFS=$IFS; IFS=$PATH_SEPARATOR
-for as_dir in $PATH
-do
- IFS=$as_save_IFS
- test -z "$as_dir" && as_dir=.
- for ac_exec_ext in '' $ac_executable_extensions; do
- if { test -f "$as_dir/$ac_word$ac_exec_ext" && $as_test_x "$as_dir/$ac_word$ac_exec_ext"; }; then
- ac_cv_prog_ac_ct_STRIP="strip"
- $as_echo "$as_me:$LINENO: found $as_dir/$ac_word$ac_exec_ext" >&5
- break 2
- fi
-done
-done
-IFS=$as_save_IFS
-
-fi
-fi
-ac_ct_STRIP=$ac_cv_prog_ac_ct_STRIP
-if test -n "$ac_ct_STRIP"; then
- { $as_echo "$as_me:$LINENO: result: $ac_ct_STRIP" >&5
-$as_echo "$ac_ct_STRIP" >&6; }
-else
- { $as_echo "$as_me:$LINENO: result: no" >&5
-$as_echo "no" >&6; }
-fi
-
- if test "x$ac_ct_STRIP" = x; then
- STRIP=":"
- else
- case $cross_compiling:$ac_tool_warned in
-yes:)
-{ $as_echo "$as_me:$LINENO: WARNING: In the future, Autoconf will not detect cross-tools
-whose name does not start with the host triplet. If you think this
-configuration is useful to you, please write to autoconf@gnu.org." >&5
-$as_echo "$as_me: WARNING: In the future, Autoconf will not detect cross-tools
-whose name does not start with the host triplet. If you think this
-configuration is useful to you, please write to autoconf@gnu.org." >&2;}
-ac_tool_warned=yes ;;
-esac
- STRIP=$ac_ct_STRIP
- fi
-else
- STRIP="$ac_cv_prog_STRIP"
-fi
-
-
-old_CC="$CC"
-old_CFLAGS="$CFLAGS"
-
-# Set sane defaults for various variables
-test -z "$AR" && AR=ar
-test -z "$AR_FLAGS" && AR_FLAGS=cru
-test -z "$AS" && AS=as
-test -z "$CC" && CC=cc
-test -z "$LTCC" && LTCC=$CC
-test -z "$LTCFLAGS" && LTCFLAGS=$CFLAGS
-test -z "$DLLTOOL" && DLLTOOL=dlltool
-test -z "$LD" && LD=ld
-test -z "$LN_S" && LN_S="ln -s"
-test -z "$MAGIC_CMD" && MAGIC_CMD=file
-test -z "$NM" && NM=nm
-test -z "$SED" && SED=sed
-test -z "$OBJDUMP" && OBJDUMP=objdump
-test -z "$RANLIB" && RANLIB=:
-test -z "$STRIP" && STRIP=:
-test -z "$ac_objext" && ac_objext=o
-
-# Determine commands to create old-style static archives.
-old_archive_cmds='$AR $AR_FLAGS $oldlib$oldobjs'
-old_postinstall_cmds='chmod 644 $oldlib'
-old_postuninstall_cmds=
-
-if test -n "$RANLIB"; then
- case $host_os in
- openbsd*)
- old_postinstall_cmds="$old_postinstall_cmds~\$RANLIB -t \$oldlib"
- ;;
- *)
- old_postinstall_cmds="$old_postinstall_cmds~\$RANLIB \$oldlib"
- ;;
- esac
- old_archive_cmds="$old_archive_cmds~\$RANLIB \$oldlib"
-fi
-
-for cc_temp in $compiler""; do
- case $cc_temp in
- compile | *[\\/]compile | ccache | *[\\/]ccache ) ;;
- distcc | *[\\/]distcc | purify | *[\\/]purify ) ;;
- \-*) ;;
- *) break;;
- esac
-done
-cc_basename=`$echo "X$cc_temp" | $Xsed -e 's%.*/%%' -e "s%^$host_alias-%%"`
-
-
-# Only perform the check for file, if the check method requires it
-case $deplibs_check_method in
-file_magic*)
- if test "$file_magic_cmd" = '$MAGIC_CMD'; then
- { $as_echo "$as_me:$LINENO: checking for ${ac_tool_prefix}file" >&5
-$as_echo_n "checking for ${ac_tool_prefix}file... " >&6; }
-if test "${lt_cv_path_MAGIC_CMD+set}" = set; then
- $as_echo_n "(cached) " >&6
-else
- case $MAGIC_CMD in
-[\\/*] | ?:[\\/]*)
- lt_cv_path_MAGIC_CMD="$MAGIC_CMD" # Let the user override the test with a path.
- ;;
-*)
- lt_save_MAGIC_CMD="$MAGIC_CMD"
- lt_save_ifs="$IFS"; IFS=$PATH_SEPARATOR
- ac_dummy="/usr/bin$PATH_SEPARATOR$PATH"
- for ac_dir in $ac_dummy; do
- IFS="$lt_save_ifs"
- test -z "$ac_dir" && ac_dir=.
- if test -f $ac_dir/${ac_tool_prefix}file; then
- lt_cv_path_MAGIC_CMD="$ac_dir/${ac_tool_prefix}file"
- if test -n "$file_magic_test_file"; then
- case $deplibs_check_method in
- "file_magic "*)
- file_magic_regex=`expr "$deplibs_check_method" : "file_magic \(.*\)"`
- MAGIC_CMD="$lt_cv_path_MAGIC_CMD"
- if eval $file_magic_cmd \$file_magic_test_file 2> /dev/null |
- $EGREP "$file_magic_regex" > /dev/null; then
- :
- else
- cat <<EOF 1>&2
-
-*** Warning: the command libtool uses to detect shared libraries,
-*** $file_magic_cmd, produces output that libtool cannot recognize.
-*** The result is that libtool may fail to recognize shared libraries
-*** as such. This will affect the creation of libtool libraries that
-*** depend on shared libraries, but programs linked with such libtool
-*** libraries will work regardless of this problem. Nevertheless, you
-*** may want to report the problem to your system manager and/or to
-*** bug-libtool@gnu.org
-
-EOF
- fi ;;
- esac
- fi
- break
- fi
- done
- IFS="$lt_save_ifs"
- MAGIC_CMD="$lt_save_MAGIC_CMD"
- ;;
-esac
-fi
-
-MAGIC_CMD="$lt_cv_path_MAGIC_CMD"
-if test -n "$MAGIC_CMD"; then
- { $as_echo "$as_me:$LINENO: result: $MAGIC_CMD" >&5
-$as_echo "$MAGIC_CMD" >&6; }
-else
- { $as_echo "$as_me:$LINENO: result: no" >&5
-$as_echo "no" >&6; }
-fi
-
-if test -z "$lt_cv_path_MAGIC_CMD"; then
- if test -n "$ac_tool_prefix"; then
- { $as_echo "$as_me:$LINENO: checking for file" >&5
-$as_echo_n "checking for file... " >&6; }
-if test "${lt_cv_path_MAGIC_CMD+set}" = set; then
- $as_echo_n "(cached) " >&6
-else
- case $MAGIC_CMD in
-[\\/*] | ?:[\\/]*)
- lt_cv_path_MAGIC_CMD="$MAGIC_CMD" # Let the user override the test with a path.
- ;;
-*)
- lt_save_MAGIC_CMD="$MAGIC_CMD"
- lt_save_ifs="$IFS"; IFS=$PATH_SEPARATOR
- ac_dummy="/usr/bin$PATH_SEPARATOR$PATH"
- for ac_dir in $ac_dummy; do
- IFS="$lt_save_ifs"
- test -z "$ac_dir" && ac_dir=.
- if test -f $ac_dir/file; then
- lt_cv_path_MAGIC_CMD="$ac_dir/file"
- if test -n "$file_magic_test_file"; then
- case $deplibs_check_method in
- "file_magic "*)
- file_magic_regex=`expr "$deplibs_check_method" : "file_magic \(.*\)"`
- MAGIC_CMD="$lt_cv_path_MAGIC_CMD"
- if eval $file_magic_cmd \$file_magic_test_file 2> /dev/null |
- $EGREP "$file_magic_regex" > /dev/null; then
- :
- else
- cat <<EOF 1>&2
-
-*** Warning: the command libtool uses to detect shared libraries,
-*** $file_magic_cmd, produces output that libtool cannot recognize.
-*** The result is that libtool may fail to recognize shared libraries
-*** as such. This will affect the creation of libtool libraries that
-*** depend on shared libraries, but programs linked with such libtool
-*** libraries will work regardless of this problem. Nevertheless, you
-*** may want to report the problem to your system manager and/or to
-*** bug-libtool@gnu.org
-
-EOF
- fi ;;
- esac
- fi
- break
- fi
- done
- IFS="$lt_save_ifs"
- MAGIC_CMD="$lt_save_MAGIC_CMD"
- ;;
-esac
-fi
-
-MAGIC_CMD="$lt_cv_path_MAGIC_CMD"
-if test -n "$MAGIC_CMD"; then
- { $as_echo "$as_me:$LINENO: result: $MAGIC_CMD" >&5
-$as_echo "$MAGIC_CMD" >&6; }
-else
- { $as_echo "$as_me:$LINENO: result: no" >&5
-$as_echo "no" >&6; }
-fi
-
- else
- MAGIC_CMD=:
- fi
-fi
-
- fi
- ;;
-esac
-
-
- case $host_os in
- rhapsody* | darwin*)
- if test -n "$ac_tool_prefix"; then
- # Extract the first word of "${ac_tool_prefix}dsymutil", so it can be a program name with args.
-set dummy ${ac_tool_prefix}dsymutil; ac_word=$2
-{ $as_echo "$as_me:$LINENO: checking for $ac_word" >&5
-$as_echo_n "checking for $ac_word... " >&6; }
-if test "${ac_cv_prog_DSYMUTIL+set}" = set; then
- $as_echo_n "(cached) " >&6
-else
- if test -n "$DSYMUTIL"; then
- ac_cv_prog_DSYMUTIL="$DSYMUTIL" # Let the user override the test.
-else
-as_save_IFS=$IFS; IFS=$PATH_SEPARATOR
-for as_dir in $PATH
-do
- IFS=$as_save_IFS
- test -z "$as_dir" && as_dir=.
- for ac_exec_ext in '' $ac_executable_extensions; do
- if { test -f "$as_dir/$ac_word$ac_exec_ext" && $as_test_x "$as_dir/$ac_word$ac_exec_ext"; }; then
- ac_cv_prog_DSYMUTIL="${ac_tool_prefix}dsymutil"
- $as_echo "$as_me:$LINENO: found $as_dir/$ac_word$ac_exec_ext" >&5
- break 2
- fi
-done
-done
-IFS=$as_save_IFS
-
-fi
-fi
-DSYMUTIL=$ac_cv_prog_DSYMUTIL
-if test -n "$DSYMUTIL"; then
- { $as_echo "$as_me:$LINENO: result: $DSYMUTIL" >&5
-$as_echo "$DSYMUTIL" >&6; }
-else
- { $as_echo "$as_me:$LINENO: result: no" >&5
-$as_echo "no" >&6; }
-fi
-
-
-fi
-if test -z "$ac_cv_prog_DSYMUTIL"; then
- ac_ct_DSYMUTIL=$DSYMUTIL
- # Extract the first word of "dsymutil", so it can be a program name with args.
-set dummy dsymutil; ac_word=$2
-{ $as_echo "$as_me:$LINENO: checking for $ac_word" >&5
-$as_echo_n "checking for $ac_word... " >&6; }
-if test "${ac_cv_prog_ac_ct_DSYMUTIL+set}" = set; then
- $as_echo_n "(cached) " >&6
-else
- if test -n "$ac_ct_DSYMUTIL"; then
- ac_cv_prog_ac_ct_DSYMUTIL="$ac_ct_DSYMUTIL" # Let the user override the test.
-else
-as_save_IFS=$IFS; IFS=$PATH_SEPARATOR
-for as_dir in $PATH
-do
- IFS=$as_save_IFS
- test -z "$as_dir" && as_dir=.
- for ac_exec_ext in '' $ac_executable_extensions; do
- if { test -f "$as_dir/$ac_word$ac_exec_ext" && $as_test_x "$as_dir/$ac_word$ac_exec_ext"; }; then
- ac_cv_prog_ac_ct_DSYMUTIL="dsymutil"
- $as_echo "$as_me:$LINENO: found $as_dir/$ac_word$ac_exec_ext" >&5
- break 2
- fi
-done
-done
-IFS=$as_save_IFS
-
-fi
-fi
-ac_ct_DSYMUTIL=$ac_cv_prog_ac_ct_DSYMUTIL
-if test -n "$ac_ct_DSYMUTIL"; then
- { $as_echo "$as_me:$LINENO: result: $ac_ct_DSYMUTIL" >&5
-$as_echo "$ac_ct_DSYMUTIL" >&6; }
-else
- { $as_echo "$as_me:$LINENO: result: no" >&5
-$as_echo "no" >&6; }
-fi
-
- if test "x$ac_ct_DSYMUTIL" = x; then
- DSYMUTIL=":"
- else
- case $cross_compiling:$ac_tool_warned in
-yes:)
-{ $as_echo "$as_me:$LINENO: WARNING: In the future, Autoconf will not detect cross-tools
-whose name does not start with the host triplet. If you think this
-configuration is useful to you, please write to autoconf@gnu.org." >&5
-$as_echo "$as_me: WARNING: In the future, Autoconf will not detect cross-tools
-whose name does not start with the host triplet. If you think this
-configuration is useful to you, please write to autoconf@gnu.org." >&2;}
-ac_tool_warned=yes ;;
-esac
- DSYMUTIL=$ac_ct_DSYMUTIL
- fi
-else
- DSYMUTIL="$ac_cv_prog_DSYMUTIL"
-fi
-
- if test -n "$ac_tool_prefix"; then
- # Extract the first word of "${ac_tool_prefix}nmedit", so it can be a program name with args.
-set dummy ${ac_tool_prefix}nmedit; ac_word=$2
-{ $as_echo "$as_me:$LINENO: checking for $ac_word" >&5
-$as_echo_n "checking for $ac_word... " >&6; }
-if test "${ac_cv_prog_NMEDIT+set}" = set; then
- $as_echo_n "(cached) " >&6
-else
- if test -n "$NMEDIT"; then
- ac_cv_prog_NMEDIT="$NMEDIT" # Let the user override the test.
-else
-as_save_IFS=$IFS; IFS=$PATH_SEPARATOR
-for as_dir in $PATH
-do
- IFS=$as_save_IFS
- test -z "$as_dir" && as_dir=.
- for ac_exec_ext in '' $ac_executable_extensions; do
- if { test -f "$as_dir/$ac_word$ac_exec_ext" && $as_test_x "$as_dir/$ac_word$ac_exec_ext"; }; then
- ac_cv_prog_NMEDIT="${ac_tool_prefix}nmedit"
- $as_echo "$as_me:$LINENO: found $as_dir/$ac_word$ac_exec_ext" >&5
- break 2
- fi
-done
-done
-IFS=$as_save_IFS
-
-fi
-fi
-NMEDIT=$ac_cv_prog_NMEDIT
-if test -n "$NMEDIT"; then
- { $as_echo "$as_me:$LINENO: result: $NMEDIT" >&5
-$as_echo "$NMEDIT" >&6; }
-else
- { $as_echo "$as_me:$LINENO: result: no" >&5
-$as_echo "no" >&6; }
-fi
-
-
-fi
-if test -z "$ac_cv_prog_NMEDIT"; then
- ac_ct_NMEDIT=$NMEDIT
- # Extract the first word of "nmedit", so it can be a program name with args.
-set dummy nmedit; ac_word=$2
-{ $as_echo "$as_me:$LINENO: checking for $ac_word" >&5
-$as_echo_n "checking for $ac_word... " >&6; }
-if test "${ac_cv_prog_ac_ct_NMEDIT+set}" = set; then
- $as_echo_n "(cached) " >&6
-else
- if test -n "$ac_ct_NMEDIT"; then
- ac_cv_prog_ac_ct_NMEDIT="$ac_ct_NMEDIT" # Let the user override the test.
-else
-as_save_IFS=$IFS; IFS=$PATH_SEPARATOR
-for as_dir in $PATH
-do
- IFS=$as_save_IFS
- test -z "$as_dir" && as_dir=.
- for ac_exec_ext in '' $ac_executable_extensions; do
- if { test -f "$as_dir/$ac_word$ac_exec_ext" && $as_test_x "$as_dir/$ac_word$ac_exec_ext"; }; then
- ac_cv_prog_ac_ct_NMEDIT="nmedit"
- $as_echo "$as_me:$LINENO: found $as_dir/$ac_word$ac_exec_ext" >&5
- break 2
- fi
-done
-done
-IFS=$as_save_IFS
-
-fi
-fi
-ac_ct_NMEDIT=$ac_cv_prog_ac_ct_NMEDIT
-if test -n "$ac_ct_NMEDIT"; then
- { $as_echo "$as_me:$LINENO: result: $ac_ct_NMEDIT" >&5
-$as_echo "$ac_ct_NMEDIT" >&6; }
-else
- { $as_echo "$as_me:$LINENO: result: no" >&5
-$as_echo "no" >&6; }
-fi
-
- if test "x$ac_ct_NMEDIT" = x; then
- NMEDIT=":"
- else
- case $cross_compiling:$ac_tool_warned in
-yes:)
-{ $as_echo "$as_me:$LINENO: WARNING: In the future, Autoconf will not detect cross-tools
-whose name does not start with the host triplet. If you think this
-configuration is useful to you, please write to autoconf@gnu.org." >&5
-$as_echo "$as_me: WARNING: In the future, Autoconf will not detect cross-tools
-whose name does not start with the host triplet. If you think this
-configuration is useful to you, please write to autoconf@gnu.org." >&2;}
-ac_tool_warned=yes ;;
-esac
- NMEDIT=$ac_ct_NMEDIT
- fi
-else
- NMEDIT="$ac_cv_prog_NMEDIT"
-fi
-
-
- { $as_echo "$as_me:$LINENO: checking for -single_module linker flag" >&5
-$as_echo_n "checking for -single_module linker flag... " >&6; }
-if test "${lt_cv_apple_cc_single_mod+set}" = set; then
- $as_echo_n "(cached) " >&6
-else
- lt_cv_apple_cc_single_mod=no
- if test -z "${LT_MULTI_MODULE}"; then
- # By default we will add the -single_module flag. You can override
- # by either setting the environment variable LT_MULTI_MODULE
- # non-empty at configure time, or by adding -multi_module to the
- # link flags.
- echo "int foo(void){return 1;}" > conftest.c
- $LTCC $LTCFLAGS $LDFLAGS -o libconftest.dylib \
- -dynamiclib ${wl}-single_module conftest.c
- if test -f libconftest.dylib; then
- lt_cv_apple_cc_single_mod=yes
- rm -rf libconftest.dylib*
- fi
- rm conftest.c
- fi
-fi
-{ $as_echo "$as_me:$LINENO: result: $lt_cv_apple_cc_single_mod" >&5
-$as_echo "$lt_cv_apple_cc_single_mod" >&6; }
- { $as_echo "$as_me:$LINENO: checking for -exported_symbols_list linker flag" >&5
-$as_echo_n "checking for -exported_symbols_list linker flag... " >&6; }
-if test "${lt_cv_ld_exported_symbols_list+set}" = set; then
- $as_echo_n "(cached) " >&6
-else
- lt_cv_ld_exported_symbols_list=no
- save_LDFLAGS=$LDFLAGS
- echo "_main" > conftest.sym
- LDFLAGS="$LDFLAGS -Wl,-exported_symbols_list,conftest.sym"
- cat >conftest.$ac_ext <<_ACEOF
-/* confdefs.h. */
-_ACEOF
-cat confdefs.h >>conftest.$ac_ext
-cat >>conftest.$ac_ext <<_ACEOF
-/* end confdefs.h. */
-
-int
-main ()
-{
-
- ;
- return 0;
-}
-_ACEOF
-rm -f conftest.$ac_objext conftest$ac_exeext
-if { (ac_try="$ac_link"
-case "(($ac_try" in
- *\"* | *\`* | *\\*) ac_try_echo=\$ac_try;;
- *) ac_try_echo=$ac_try;;
-esac
-eval ac_try_echo="\"\$as_me:$LINENO: $ac_try_echo\""
-$as_echo "$ac_try_echo") >&5
- (eval "$ac_link") 2>conftest.er1
- ac_status=$?
- grep -v '^ *+' conftest.er1 >conftest.err
- rm -f conftest.er1
- cat conftest.err >&5
- $as_echo "$as_me:$LINENO: \$? = $ac_status" >&5
- (exit $ac_status); } && {
- test -z "$ac_c_werror_flag" ||
- test ! -s conftest.err
- } && test -s conftest$ac_exeext && {
- test "$cross_compiling" = yes ||
- $as_test_x conftest$ac_exeext
- }; then
- lt_cv_ld_exported_symbols_list=yes
-else
- $as_echo "$as_me: failed program was:" >&5
-sed 's/^/| /' conftest.$ac_ext >&5
-
- lt_cv_ld_exported_symbols_list=no
-fi
-
-rm -rf conftest.dSYM
-rm -f core conftest.err conftest.$ac_objext conftest_ipa8_conftest.oo \
- conftest$ac_exeext conftest.$ac_ext
- LDFLAGS="$save_LDFLAGS"
-
-fi
-{ $as_echo "$as_me:$LINENO: result: $lt_cv_ld_exported_symbols_list" >&5
-$as_echo "$lt_cv_ld_exported_symbols_list" >&6; }
- case $host_os in
- rhapsody* | darwin1.[0123])
- _lt_dar_allow_undefined='${wl}-undefined ${wl}suppress' ;;
- darwin1.*)
- _lt_dar_allow_undefined='${wl}-flat_namespace ${wl}-undefined ${wl}suppress' ;;
- darwin*)
- # if running on 10.5 or later, the deployment target defaults
- # to the OS version, if on x86, and 10.4, the deployment
- # target defaults to 10.4. Don't you love it?
- case ${MACOSX_DEPLOYMENT_TARGET-10.0},$host in
- 10.0,*86*-darwin8*|10.0,*-darwin[91]*)
- _lt_dar_allow_undefined='${wl}-undefined ${wl}dynamic_lookup' ;;
- 10.[012]*)
- _lt_dar_allow_undefined='${wl}-flat_namespace ${wl}-undefined ${wl}suppress' ;;
- 10.*)
- _lt_dar_allow_undefined='${wl}-undefined ${wl}dynamic_lookup' ;;
- esac
- ;;
- esac
- if test "$lt_cv_apple_cc_single_mod" = "yes"; then
- _lt_dar_single_mod='$single_module'
- fi
- if test "$lt_cv_ld_exported_symbols_list" = "yes"; then
- _lt_dar_export_syms=' ${wl}-exported_symbols_list,$output_objdir/${libname}-symbols.expsym'
- else
- _lt_dar_export_syms="~$NMEDIT -s \$output_objdir/\${libname}-symbols.expsym \${lib}"
- fi
- if test "$DSYMUTIL" != ":"; then
- _lt_dsymutil="~$DSYMUTIL \$lib || :"
- else
- _lt_dsymutil=
- fi
- ;;
- esac
-
-
-enable_dlopen=no
-enable_win32_dll=no
-
-# Check whether --enable-libtool-lock was given.
-if test "${enable_libtool_lock+set}" = set; then
- enableval=$enable_libtool_lock;
-fi
-
-test "x$enable_libtool_lock" != xno && enable_libtool_lock=yes
-
-
-# Check whether --with-pic was given.
-if test "${with_pic+set}" = set; then
- withval=$with_pic; pic_mode="$withval"
-else
- pic_mode=default
-fi
-
-test -z "$pic_mode" && pic_mode=default
-
-# Use C for the default configuration in the libtool script
-tagname=
-lt_save_CC="$CC"
-ac_ext=c
-ac_cpp='$CPP $CPPFLAGS'
-ac_compile='$CC -c $CFLAGS $CPPFLAGS conftest.$ac_ext >&5'
-ac_link='$CC -o conftest$ac_exeext $CFLAGS $CPPFLAGS $LDFLAGS conftest.$ac_ext $LIBS >&5'
-ac_compiler_gnu=$ac_cv_c_compiler_gnu
-
-
-# Source file extension for C test sources.
-ac_ext=c
-
-# Object file extension for compiled C test sources.
-objext=o
-objext=$objext
-
-# Code to be used in simple compile tests
-lt_simple_compile_test_code="int some_variable = 0;"
-
-# Code to be used in simple link tests
-lt_simple_link_test_code='int main(){return(0);}'
-
-
-# If no C compiler was specified, use CC.
-LTCC=${LTCC-"$CC"}
-
-# If no C compiler flags were specified, use CFLAGS.
-LTCFLAGS=${LTCFLAGS-"$CFLAGS"}
-
-# Allow CC to be a program name with arguments.
-compiler=$CC
-
-
-# save warnings/boilerplate of simple test code
-ac_outfile=conftest.$ac_objext
-echo "$lt_simple_compile_test_code" >conftest.$ac_ext
-eval "$ac_compile" 2>&1 >/dev/null | $SED '/^$/d; /^ *+/d' >conftest.err
-_lt_compiler_boilerplate=`cat conftest.err`
-$rm conftest*
-
-ac_outfile=conftest.$ac_objext
-echo "$lt_simple_link_test_code" >conftest.$ac_ext
-eval "$ac_link" 2>&1 >/dev/null | $SED '/^$/d; /^ *+/d' >conftest.err
-_lt_linker_boilerplate=`cat conftest.err`
-$rm -r conftest*
-
-
-
-lt_prog_compiler_no_builtin_flag=
-
-if test "$GCC" = yes; then
- lt_prog_compiler_no_builtin_flag=' -fno-builtin'
-
-
-{ $as_echo "$as_me:$LINENO: checking if $compiler supports -fno-rtti -fno-exceptions" >&5
-$as_echo_n "checking if $compiler supports -fno-rtti -fno-exceptions... " >&6; }
-if test "${lt_cv_prog_compiler_rtti_exceptions+set}" = set; then
- $as_echo_n "(cached) " >&6
-else
- lt_cv_prog_compiler_rtti_exceptions=no
- ac_outfile=conftest.$ac_objext
- echo "$lt_simple_compile_test_code" > conftest.$ac_ext
- lt_compiler_flag="-fno-rtti -fno-exceptions"
- # Insert the option either (1) after the last *FLAGS variable, or
- # (2) before a word containing "conftest.", or (3) at the end.
- # Note that $ac_compile itself does not contain backslashes and begins
- # with a dollar sign (not a hyphen), so the echo should work correctly.
- # The option is referenced via a variable to avoid confusing sed.
- lt_compile=`echo "$ac_compile" | $SED \
- -e 's:.*FLAGS}\{0,1\} :&$lt_compiler_flag :; t' \
- -e 's: [^ ]*conftest\.: $lt_compiler_flag&:; t' \
- -e 's:$: $lt_compiler_flag:'`
- (eval echo "\"\$as_me:9927: $lt_compile\"" >&5)
- (eval "$lt_compile" 2>conftest.err)
- ac_status=$?
- cat conftest.err >&5
- echo "$as_me:9931: \$? = $ac_status" >&5
- if (exit $ac_status) && test -s "$ac_outfile"; then
- # The compiler can only warn and ignore the option if not recognized
- # So say no if there are warnings other than the usual output.
- $echo "X$_lt_compiler_boilerplate" | $Xsed -e '/^$/d' >conftest.exp
- $SED '/^$/d; /^ *+/d' conftest.err >conftest.er2
- if test ! -s conftest.er2 || diff conftest.exp conftest.er2 >/dev/null; then
- lt_cv_prog_compiler_rtti_exceptions=yes
- fi
- fi
- $rm conftest*
-
-fi
-{ $as_echo "$as_me:$LINENO: result: $lt_cv_prog_compiler_rtti_exceptions" >&5
-$as_echo "$lt_cv_prog_compiler_rtti_exceptions" >&6; }
-
-if test x"$lt_cv_prog_compiler_rtti_exceptions" = xyes; then
- lt_prog_compiler_no_builtin_flag="$lt_prog_compiler_no_builtin_flag -fno-rtti -fno-exceptions"
-else
- :
-fi
-
-fi
-
-lt_prog_compiler_wl=
-lt_prog_compiler_pic=
-lt_prog_compiler_static=
-
-{ $as_echo "$as_me:$LINENO: checking for $compiler option to produce PIC" >&5
-$as_echo_n "checking for $compiler option to produce PIC... " >&6; }
-
- if test "$GCC" = yes; then
- lt_prog_compiler_wl='-Wl,'
- lt_prog_compiler_static='-static'
-
- case $host_os in
- aix*)
- # All AIX code is PIC.
- if test "$host_cpu" = ia64; then
- # AIX 5 now supports IA64 processor
- lt_prog_compiler_static='-Bstatic'
- fi
- ;;
-
- amigaos*)
- # FIXME: we need at least 68020 code to build shared libraries, but
- # adding the `-m68020' flag to GCC prevents building anything better,
- # like `-m68040'.
- lt_prog_compiler_pic='-m68020 -resident32 -malways-restore-a4'
- ;;
-
- beos* | irix5* | irix6* | nonstopux* | osf3* | osf4* | osf5*)
- # PIC is the default for these OSes.
- ;;
-
- mingw* | cygwin* | pw32* | os2*)
- # This hack is so that the source file can tell whether it is being
- # built for inclusion in a dll (and should export symbols for example).
- # Although the cygwin gcc ignores -fPIC, still need this for old-style
- # (--disable-auto-import) libraries
- lt_prog_compiler_pic='-DDLL_EXPORT'
- ;;
-
- darwin* | rhapsody*)
- # PIC is the default on this platform
- # Common symbols not allowed in MH_DYLIB files
- lt_prog_compiler_pic='-fno-common'
- ;;
-
- interix[3-9]*)
- # Interix 3.x gcc -fpic/-fPIC options generate broken code.
- # Instead, we relocate shared libraries at runtime.
- ;;
-
- msdosdjgpp*)
- # Just because we use GCC doesn't mean we suddenly get shared libraries
- # on systems that don't support them.
- lt_prog_compiler_can_build_shared=no
- enable_shared=no
- ;;
-
- sysv4*MP*)
- if test -d /usr/nec; then
- lt_prog_compiler_pic=-Kconform_pic
- fi
- ;;
-
- hpux*)
- # PIC is the default for IA64 HP-UX and 64-bit HP-UX, but
- # not for PA HP-UX.
- case $host_cpu in
- hppa*64*|ia64*)
- # +Z the default
- ;;
- *)
- lt_prog_compiler_pic='-fPIC'
- ;;
- esac
- ;;
-
- *)
- lt_prog_compiler_pic='-fPIC'
- ;;
- esac
- else
- # PORTME Check for flag to pass linker flags through the system compiler.
- case $host_os in
- aix*)
- lt_prog_compiler_wl='-Wl,'
- if test "$host_cpu" = ia64; then
- # AIX 5 now supports IA64 processor
- lt_prog_compiler_static='-Bstatic'
- else
- lt_prog_compiler_static='-bnso -bI:/lib/syscalls.exp'
- fi
- ;;
- darwin*)
- # PIC is the default on this platform
- # Common symbols not allowed in MH_DYLIB files
- case $cc_basename in
- xlc*)
- lt_prog_compiler_pic='-qnocommon'
- lt_prog_compiler_wl='-Wl,'
- ;;
- esac
- ;;
-
- mingw* | cygwin* | pw32* | os2*)
- # This hack is so that the source file can tell whether it is being
- # built for inclusion in a dll (and should export symbols for example).
- lt_prog_compiler_pic='-DDLL_EXPORT'
- ;;
-
- hpux9* | hpux10* | hpux11*)
- lt_prog_compiler_wl='-Wl,'
- # PIC is the default for IA64 HP-UX and 64-bit HP-UX, but
- # not for PA HP-UX.
- case $host_cpu in
- hppa*64*|ia64*)
- # +Z the default
- ;;
- *)
- lt_prog_compiler_pic='+Z'
- ;;
- esac
- # Is there a better lt_prog_compiler_static that works with the bundled CC?
- lt_prog_compiler_static='${wl}-a ${wl}archive'
- ;;
-
- irix5* | irix6* | nonstopux*)
- lt_prog_compiler_wl='-Wl,'
- # PIC (with -KPIC) is the default.
- lt_prog_compiler_static='-non_shared'
- ;;
-
- newsos6)
- lt_prog_compiler_pic='-KPIC'
- lt_prog_compiler_static='-Bstatic'
- ;;
-
- linux* | k*bsd*-gnu)
- case $cc_basename in
- icc* | ecc*)
- lt_prog_compiler_wl='-Wl,'
- lt_prog_compiler_pic='-KPIC'
- lt_prog_compiler_static='-static'
- ;;
- pgcc* | pgf77* | pgf90* | pgf95*)
- # Portland Group compilers (*not* the Pentium gcc compiler,
- # which looks to be a dead project)
- lt_prog_compiler_wl='-Wl,'
- lt_prog_compiler_pic='-fpic'
- lt_prog_compiler_static='-Bstatic'
- ;;
- ccc*)
- lt_prog_compiler_wl='-Wl,'
- # All Alpha code is PIC.
- lt_prog_compiler_static='-non_shared'
- ;;
- *)
- case `$CC -V 2>&1 | sed 5q` in
- *Sun\ C*)
- # Sun C 5.9
- lt_prog_compiler_pic='-KPIC'
- lt_prog_compiler_static='-Bstatic'
- lt_prog_compiler_wl='-Wl,'
- ;;
- *Sun\ F*)
- # Sun Fortran 8.3 passes all unrecognized flags to the linker
- lt_prog_compiler_pic='-KPIC'
- lt_prog_compiler_static='-Bstatic'
- lt_prog_compiler_wl=''
- ;;
- esac
- ;;
- esac
- ;;
-
- osf3* | osf4* | osf5*)
- lt_prog_compiler_wl='-Wl,'
- # All OSF/1 code is PIC.
- lt_prog_compiler_static='-non_shared'
- ;;
-
- rdos*)
- lt_prog_compiler_static='-non_shared'
- ;;
-
- solaris*)
- lt_prog_compiler_pic='-KPIC'
- lt_prog_compiler_static='-Bstatic'
- case $cc_basename in
- f77* | f90* | f95*)
- lt_prog_compiler_wl='-Qoption ld ';;
- *)
- lt_prog_compiler_wl='-Wl,';;
- esac
- ;;
-
- sunos4*)
- lt_prog_compiler_wl='-Qoption ld '
- lt_prog_compiler_pic='-PIC'
- lt_prog_compiler_static='-Bstatic'
- ;;
-
- sysv4 | sysv4.2uw2* | sysv4.3*)
- lt_prog_compiler_wl='-Wl,'
- lt_prog_compiler_pic='-KPIC'
- lt_prog_compiler_static='-Bstatic'
- ;;
-
- sysv4*MP*)
- if test -d /usr/nec ;then
- lt_prog_compiler_pic='-Kconform_pic'
- lt_prog_compiler_static='-Bstatic'
- fi
- ;;
-
- sysv5* | unixware* | sco3.2v5* | sco5v6* | OpenUNIX*)
- lt_prog_compiler_wl='-Wl,'
- lt_prog_compiler_pic='-KPIC'
- lt_prog_compiler_static='-Bstatic'
- ;;
-
- unicos*)
- lt_prog_compiler_wl='-Wl,'
- lt_prog_compiler_can_build_shared=no
- ;;
-
- uts4*)
- lt_prog_compiler_pic='-pic'
- lt_prog_compiler_static='-Bstatic'
- ;;
-
- *)
- lt_prog_compiler_can_build_shared=no
- ;;
- esac
- fi
-
-{ $as_echo "$as_me:$LINENO: result: $lt_prog_compiler_pic" >&5
-$as_echo "$lt_prog_compiler_pic" >&6; }
-
-#
-# Check to make sure the PIC flag actually works.
-#
-if test -n "$lt_prog_compiler_pic"; then
-
-{ $as_echo "$as_me:$LINENO: checking if $compiler PIC flag $lt_prog_compiler_pic works" >&5
-$as_echo_n "checking if $compiler PIC flag $lt_prog_compiler_pic works... " >&6; }
-if test "${lt_cv_prog_compiler_pic_works+set}" = set; then
- $as_echo_n "(cached) " >&6
-else
- lt_cv_prog_compiler_pic_works=no
- ac_outfile=conftest.$ac_objext
- echo "$lt_simple_compile_test_code" > conftest.$ac_ext
- lt_compiler_flag="$lt_prog_compiler_pic -DPIC"
- # Insert the option either (1) after the last *FLAGS variable, or
- # (2) before a word containing "conftest.", or (3) at the end.
- # Note that $ac_compile itself does not contain backslashes and begins
- # with a dollar sign (not a hyphen), so the echo should work correctly.
- # The option is referenced via a variable to avoid confusing sed.
- lt_compile=`echo "$ac_compile" | $SED \
- -e 's:.*FLAGS}\{0,1\} :&$lt_compiler_flag :; t' \
- -e 's: [^ ]*conftest\.: $lt_compiler_flag&:; t' \
- -e 's:$: $lt_compiler_flag:'`
- (eval echo "\"\$as_me:10217: $lt_compile\"" >&5)
- (eval "$lt_compile" 2>conftest.err)
- ac_status=$?
- cat conftest.err >&5
- echo "$as_me:10221: \$? = $ac_status" >&5
- if (exit $ac_status) && test -s "$ac_outfile"; then
- # The compiler can only warn and ignore the option if not recognized
- # So say no if there are warnings other than the usual output.
- $echo "X$_lt_compiler_boilerplate" | $Xsed -e '/^$/d' >conftest.exp
- $SED '/^$/d; /^ *+/d' conftest.err >conftest.er2
- if test ! -s conftest.er2 || diff conftest.exp conftest.er2 >/dev/null; then
- lt_cv_prog_compiler_pic_works=yes
- fi
- fi
- $rm conftest*
-
-fi
-{ $as_echo "$as_me:$LINENO: result: $lt_cv_prog_compiler_pic_works" >&5
-$as_echo "$lt_cv_prog_compiler_pic_works" >&6; }
-
-if test x"$lt_cv_prog_compiler_pic_works" = xyes; then
- case $lt_prog_compiler_pic in
- "" | " "*) ;;
- *) lt_prog_compiler_pic=" $lt_prog_compiler_pic" ;;
- esac
-else
- lt_prog_compiler_pic=
- lt_prog_compiler_can_build_shared=no
-fi
-
-fi
-case $host_os in
- # For platforms which do not support PIC, -DPIC is meaningless:
- *djgpp*)
- lt_prog_compiler_pic=
- ;;
- *)
- lt_prog_compiler_pic="$lt_prog_compiler_pic -DPIC"
- ;;
-esac
-
-#
-# Check to make sure the static flag actually works.
-#
-wl=$lt_prog_compiler_wl eval lt_tmp_static_flag=\"$lt_prog_compiler_static\"
-{ $as_echo "$as_me:$LINENO: checking if $compiler static flag $lt_tmp_static_flag works" >&5
-$as_echo_n "checking if $compiler static flag $lt_tmp_static_flag works... " >&6; }
-if test "${lt_cv_prog_compiler_static_works+set}" = set; then
- $as_echo_n "(cached) " >&6
-else
- lt_cv_prog_compiler_static_works=no
- save_LDFLAGS="$LDFLAGS"
- LDFLAGS="$LDFLAGS $lt_tmp_static_flag"
- echo "$lt_simple_link_test_code" > conftest.$ac_ext
- if (eval $ac_link 2>conftest.err) && test -s conftest$ac_exeext; then
- # The linker can only warn and ignore the option if not recognized
- # So say no if there are warnings
- if test -s conftest.err; then
- # Append any errors to the config.log.
- cat conftest.err 1>&5
- $echo "X$_lt_linker_boilerplate" | $Xsed -e '/^$/d' > conftest.exp
- $SED '/^$/d; /^ *+/d' conftest.err >conftest.er2
- if diff conftest.exp conftest.er2 >/dev/null; then
- lt_cv_prog_compiler_static_works=yes
- fi
- else
- lt_cv_prog_compiler_static_works=yes
- fi
- fi
- $rm -r conftest*
- LDFLAGS="$save_LDFLAGS"
-
-fi
-{ $as_echo "$as_me:$LINENO: result: $lt_cv_prog_compiler_static_works" >&5
-$as_echo "$lt_cv_prog_compiler_static_works" >&6; }
-
-if test x"$lt_cv_prog_compiler_static_works" = xyes; then
- :
-else
- lt_prog_compiler_static=
-fi
-
-
-{ $as_echo "$as_me:$LINENO: checking if $compiler supports -c -o file.$ac_objext" >&5
-$as_echo_n "checking if $compiler supports -c -o file.$ac_objext... " >&6; }
-if test "${lt_cv_prog_compiler_c_o+set}" = set; then
- $as_echo_n "(cached) " >&6
-else
- lt_cv_prog_compiler_c_o=no
- $rm -r conftest 2>/dev/null
- mkdir conftest
- cd conftest
- mkdir out
- echo "$lt_simple_compile_test_code" > conftest.$ac_ext
-
- lt_compiler_flag="-o out/conftest2.$ac_objext"
- # Insert the option either (1) after the last *FLAGS variable, or
- # (2) before a word containing "conftest.", or (3) at the end.
- # Note that $ac_compile itself does not contain backslashes and begins
- # with a dollar sign (not a hyphen), so the echo should work correctly.
- lt_compile=`echo "$ac_compile" | $SED \
- -e 's:.*FLAGS}\{0,1\} :&$lt_compiler_flag :; t' \
- -e 's: [^ ]*conftest\.: $lt_compiler_flag&:; t' \
- -e 's:$: $lt_compiler_flag:'`
- (eval echo "\"\$as_me:10321: $lt_compile\"" >&5)
- (eval "$lt_compile" 2>out/conftest.err)
- ac_status=$?
- cat out/conftest.err >&5
- echo "$as_me:10325: \$? = $ac_status" >&5
- if (exit $ac_status) && test -s out/conftest2.$ac_objext
- then
- # The compiler can only warn and ignore the option if not recognized
- # So say no if there are warnings
- $echo "X$_lt_compiler_boilerplate" | $Xsed -e '/^$/d' > out/conftest.exp
- $SED '/^$/d; /^ *+/d' out/conftest.err >out/conftest.er2
- if test ! -s out/conftest.er2 || diff out/conftest.exp out/conftest.er2 >/dev/null; then
- lt_cv_prog_compiler_c_o=yes
- fi
- fi
- chmod u+w . 2>&5
- $rm conftest*
- # SGI C++ compiler will create directory out/ii_files/ for
- # template instantiation
- test -d out/ii_files && $rm out/ii_files/* && rmdir out/ii_files
- $rm out/* && rmdir out
- cd ..
- rmdir conftest
- $rm conftest*
-
-fi
-{ $as_echo "$as_me:$LINENO: result: $lt_cv_prog_compiler_c_o" >&5
-$as_echo "$lt_cv_prog_compiler_c_o" >&6; }
-
-
-hard_links="nottested"
-if test "$lt_cv_prog_compiler_c_o" = no && test "$need_locks" != no; then
- # do not overwrite the value of need_locks provided by the user
- { $as_echo "$as_me:$LINENO: checking if we can lock with hard links" >&5
-$as_echo_n "checking if we can lock with hard links... " >&6; }
- hard_links=yes
- $rm conftest*
- ln conftest.a conftest.b 2>/dev/null && hard_links=no
- touch conftest.a
- ln conftest.a conftest.b 2>&5 || hard_links=no
- ln conftest.a conftest.b 2>/dev/null && hard_links=no
- { $as_echo "$as_me:$LINENO: result: $hard_links" >&5
-$as_echo "$hard_links" >&6; }
- if test "$hard_links" = no; then
- { $as_echo "$as_me:$LINENO: WARNING: \`$CC' does not support \`-c -o', so \`make -j' may be unsafe" >&5
-$as_echo "$as_me: WARNING: \`$CC' does not support \`-c -o', so \`make -j' may be unsafe" >&2;}
- need_locks=warn
- fi
-else
- need_locks=no
-fi
-
-{ $as_echo "$as_me:$LINENO: checking whether the $compiler linker ($LD) supports shared libraries" >&5
-$as_echo_n "checking whether the $compiler linker ($LD) supports shared libraries... " >&6; }
-
- runpath_var=
- allow_undefined_flag=
- enable_shared_with_static_runtimes=no
- archive_cmds=
- archive_expsym_cmds=
- old_archive_From_new_cmds=
- old_archive_from_expsyms_cmds=
- export_dynamic_flag_spec=
- whole_archive_flag_spec=
- thread_safe_flag_spec=
- hardcode_libdir_flag_spec=
- hardcode_libdir_flag_spec_ld=
- hardcode_libdir_separator=
- hardcode_direct=no
- hardcode_minus_L=no
- hardcode_shlibpath_var=unsupported
- link_all_deplibs=unknown
- hardcode_automatic=no
- module_cmds=
- module_expsym_cmds=
- always_export_symbols=no
- export_symbols_cmds='$NM $libobjs $convenience | $global_symbol_pipe | $SED '\''s/.* //'\'' | sort | uniq > $export_symbols'
- # include_expsyms should be a list of space-separated symbols to be *always*
- # included in the symbol list
- include_expsyms=
- # exclude_expsyms can be an extended regexp of symbols to exclude
- # it will be wrapped by ` (' and `)$', so one must not match beginning or
- # end of line. Example: `a|bc|.*d.*' will exclude the symbols `a' and `bc',
- # as well as any symbol that contains `d'.
- exclude_expsyms='_GLOBAL_OFFSET_TABLE_|_GLOBAL__F[ID]_.*'
- # Although _GLOBAL_OFFSET_TABLE_ is a valid symbol C name, most a.out
- # platforms (ab)use it in PIC code, but their linkers get confused if
- # the symbol is explicitly referenced. Since portable code cannot
- # rely on this symbol name, it's probably fine to never include it in
- # preloaded symbol tables.
- # Exclude shared library initialization/finalization symbols.
- extract_expsyms_cmds=
- # Just being paranoid about ensuring that cc_basename is set.
- for cc_temp in $compiler""; do
- case $cc_temp in
- compile | *[\\/]compile | ccache | *[\\/]ccache ) ;;
- distcc | *[\\/]distcc | purify | *[\\/]purify ) ;;
- \-*) ;;
- *) break;;
- esac
-done
-cc_basename=`$echo "X$cc_temp" | $Xsed -e 's%.*/%%' -e "s%^$host_alias-%%"`
-
- case $host_os in
- cygwin* | mingw* | pw32*)
- # FIXME: the MSVC++ port hasn't been tested in a loooong time
- # When not using gcc, we currently assume that we are using
- # Microsoft Visual C++.
- if test "$GCC" != yes; then
- with_gnu_ld=no
- fi
- ;;
- interix*)
- # we just hope/assume this is gcc and not c89 (= MSVC++)
- with_gnu_ld=yes
- ;;
- openbsd*)
- with_gnu_ld=no
- ;;
- esac
-
- ld_shlibs=yes
- if test "$with_gnu_ld" = yes; then
- # If archive_cmds runs LD, not CC, wlarc should be empty
- wlarc='${wl}'
-
- # Set some defaults for GNU ld with shared library support. These
- # are reset later if shared libraries are not supported. Putting them
- # here allows them to be overridden if necessary.
- runpath_var=LD_RUN_PATH
- hardcode_libdir_flag_spec='${wl}--rpath ${wl}$libdir'
- export_dynamic_flag_spec='${wl}--export-dynamic'
- # ancient GNU ld didn't support --whole-archive et. al.
- if $LD --help 2>&1 | grep 'no-whole-archive' > /dev/null; then
- whole_archive_flag_spec="$wlarc"'--whole-archive$convenience '"$wlarc"'--no-whole-archive'
- else
- whole_archive_flag_spec=
- fi
- supports_anon_versioning=no
- case `$LD -v 2>/dev/null` in
- *\ [01].* | *\ 2.[0-9].* | *\ 2.10.*) ;; # catch versions < 2.11
- *\ 2.11.93.0.2\ *) supports_anon_versioning=yes ;; # RH7.3 ...
- *\ 2.11.92.0.12\ *) supports_anon_versioning=yes ;; # Mandrake 8.2 ...
- *\ 2.11.*) ;; # other 2.11 versions
- *) supports_anon_versioning=yes ;;
- esac
-
- # See if GNU ld supports shared libraries.
- case $host_os in
- aix[3-9]*)
- # On AIX/PPC, the GNU linker is very broken
- if test "$host_cpu" != ia64; then
- ld_shlibs=no
- cat <<EOF 1>&2
-
-*** Warning: the GNU linker, at least up to release 2.9.1, is reported
-*** to be unable to reliably create shared libraries on AIX.
-*** Therefore, libtool is disabling shared libraries support. If you
-*** really care for shared libraries, you may want to modify your PATH
-*** so that a non-GNU linker is found, and then restart.
-
-EOF
- fi
- ;;
-
- amigaos*)
- archive_cmds='$rm $output_objdir/a2ixlibrary.data~$echo "#define NAME $libname" > $output_objdir/a2ixlibrary.data~$echo "#define LIBRARY_ID 1" >> $output_objdir/a2ixlibrary.data~$echo "#define VERSION $major" >> $output_objdir/a2ixlibrary.data~$echo "#define REVISION $revision" >> $output_objdir/a2ixlibrary.data~$AR $AR_FLAGS $lib $libobjs~$RANLIB $lib~(cd $output_objdir && a2ixlibrary -32)'
- hardcode_libdir_flag_spec='-L$libdir'
- hardcode_minus_L=yes
-
- # Samuel A. Falvo II <kc5tja@dolphin.openprojects.net> reports
- # that the semantics of dynamic libraries on AmigaOS, at least up
- # to version 4, is to share data among multiple programs linked
- # with the same dynamic library. Since this doesn't match the
- # behavior of shared libraries on other platforms, we can't use
- # them.
- ld_shlibs=no
- ;;
-
- beos*)
- if $LD --help 2>&1 | grep ': supported targets:.* elf' > /dev/null; then
- allow_undefined_flag=unsupported
- # Joseph Beckenbach <jrb3@best.com> says some releases of gcc
- # support --undefined. This deserves some investigation. FIXME
- archive_cmds='$CC -nostart $libobjs $deplibs $compiler_flags ${wl}-soname $wl$soname -o $lib'
- else
- ld_shlibs=no
- fi
- ;;
-
- cygwin* | mingw* | pw32*)
- # _LT_AC_TAGVAR(hardcode_libdir_flag_spec, ) is actually meaningless,
- # as there is no search path for DLLs.
- hardcode_libdir_flag_spec='-L$libdir'
- allow_undefined_flag=unsupported
- always_export_symbols=no
- enable_shared_with_static_runtimes=yes
- export_symbols_cmds='$NM $libobjs $convenience | $global_symbol_pipe | $SED -e '\''/^[BCDGRS][ ]/s/.*[ ]\([^ ]*\)/\1 DATA/'\'' -e '\''/^[AITW][ ]/s/.*[ ]//'\'' | sort | uniq > $export_symbols'
-
- if $LD --help 2>&1 | grep 'auto-import' > /dev/null; then
- archive_cmds='$CC -shared $libobjs $deplibs $compiler_flags -o $output_objdir/$soname ${wl}--enable-auto-image-base -Xlinker --out-implib -Xlinker $lib'
- # If the export-symbols file already is a .def file (1st line
- # is EXPORTS), use it as is; otherwise, prepend...
- archive_expsym_cmds='if test "x`$SED 1q $export_symbols`" = xEXPORTS; then
- cp $export_symbols $output_objdir/$soname.def;
- else
- echo EXPORTS > $output_objdir/$soname.def;
- cat $export_symbols >> $output_objdir/$soname.def;
- fi~
- $CC -shared $output_objdir/$soname.def $libobjs $deplibs $compiler_flags -o $output_objdir/$soname ${wl}--enable-auto-image-base -Xlinker --out-implib -Xlinker $lib'
- else
- ld_shlibs=no
- fi
- ;;
-
- interix[3-9]*)
- hardcode_direct=no
- hardcode_shlibpath_var=no
- hardcode_libdir_flag_spec='${wl}-rpath,$libdir'
- export_dynamic_flag_spec='${wl}-E'
- # Hack: On Interix 3.x, we cannot compile PIC because of a broken gcc.
- # Instead, shared libraries are loaded at an image base (0x10000000 by
- # default) and relocated if they conflict, which is a slow very memory
- # consuming and fragmenting process. To avoid this, we pick a random,
- # 256 KiB-aligned image base between 0x50000000 and 0x6FFC0000 at link
- # time. Moving up from 0x10000000 also allows more sbrk(2) space.
- archive_cmds='$CC -shared $pic_flag $libobjs $deplibs $compiler_flags ${wl}-h,$soname ${wl}--image-base,`expr ${RANDOM-$$} % 4096 / 2 \* 262144 + 1342177280` -o $lib'
- archive_expsym_cmds='sed "s,^,_," $export_symbols >$output_objdir/$soname.expsym~$CC -shared $pic_flag $libobjs $deplibs $compiler_flags ${wl}-h,$soname ${wl}--retain-symbols-file,$output_objdir/$soname.expsym ${wl}--image-base,`expr ${RANDOM-$$} % 4096 / 2 \* 262144 + 1342177280` -o $lib'
- ;;
-
- gnu* | linux* | k*bsd*-gnu)
- if $LD --help 2>&1 | grep ': supported targets:.* elf' > /dev/null; then
- tmp_addflag=
- case $cc_basename,$host_cpu in
- pgcc*) # Portland Group C compiler
- whole_archive_flag_spec='${wl}--whole-archive`for conv in $convenience\"\"; do test -n \"$conv\" && new_convenience=\"$new_convenience,$conv\"; done; $echo \"$new_convenience\"` ${wl}--no-whole-archive'
- tmp_addflag=' $pic_flag'
- ;;
- pgf77* | pgf90* | pgf95*) # Portland Group f77 and f90 compilers
- whole_archive_flag_spec='${wl}--whole-archive`for conv in $convenience\"\"; do test -n \"$conv\" && new_convenience=\"$new_convenience,$conv\"; done; $echo \"$new_convenience\"` ${wl}--no-whole-archive'
- tmp_addflag=' $pic_flag -Mnomain' ;;
- ecc*,ia64* | icc*,ia64*) # Intel C compiler on ia64
- tmp_addflag=' -i_dynamic' ;;
- efc*,ia64* | ifort*,ia64*) # Intel Fortran compiler on ia64
- tmp_addflag=' -i_dynamic -nofor_main' ;;
- ifc* | ifort*) # Intel Fortran compiler
- tmp_addflag=' -nofor_main' ;;
- esac
- case `$CC -V 2>&1 | sed 5q` in
- *Sun\ C*) # Sun C 5.9
- whole_archive_flag_spec='${wl}--whole-archive`new_convenience=; for conv in $convenience\"\"; do test -z \"$conv\" || new_convenience=\"$new_convenience,$conv\"; done; $echo \"$new_convenience\"` ${wl}--no-whole-archive'
- tmp_sharedflag='-G' ;;
- *Sun\ F*) # Sun Fortran 8.3
- tmp_sharedflag='-G' ;;
- *)
- tmp_sharedflag='-shared' ;;
- esac
- archive_cmds='$CC '"$tmp_sharedflag""$tmp_addflag"' $libobjs $deplibs $compiler_flags ${wl}-soname $wl$soname -o $lib'
-
- if test $supports_anon_versioning = yes; then
- archive_expsym_cmds='$echo "{ global:" > $output_objdir/$libname.ver~
- cat $export_symbols | sed -e "s/\(.*\)/\1;/" >> $output_objdir/$libname.ver~
- $echo "local: *; };" >> $output_objdir/$libname.ver~
- $CC '"$tmp_sharedflag""$tmp_addflag"' $libobjs $deplibs $compiler_flags ${wl}-soname $wl$soname ${wl}-version-script ${wl}$output_objdir/$libname.ver -o $lib'
- fi
- else
- ld_shlibs=no
- fi
- ;;
-
- netbsd*)
- if echo __ELF__ | $CC -E - | grep __ELF__ >/dev/null; then
- archive_cmds='$LD -Bshareable $libobjs $deplibs $linker_flags -o $lib'
- wlarc=
- else
- archive_cmds='$CC -shared $libobjs $deplibs $compiler_flags ${wl}-soname $wl$soname -o $lib'
- archive_expsym_cmds='$CC -shared $libobjs $deplibs $compiler_flags ${wl}-soname $wl$soname ${wl}-retain-symbols-file $wl$export_symbols -o $lib'
- fi
- ;;
-
- solaris*)
- if $LD -v 2>&1 | grep 'BFD 2\.8' > /dev/null; then
- ld_shlibs=no
- cat <<EOF 1>&2
-
-*** Warning: The releases 2.8.* of the GNU linker cannot reliably
-*** create shared libraries on Solaris systems. Therefore, libtool
-*** is disabling shared libraries support. We urge you to upgrade GNU
-*** binutils to release 2.9.1 or newer. Another option is to modify
-*** your PATH or compiler configuration so that the native linker is
-*** used, and then restart.
-
-EOF
- elif $LD --help 2>&1 | grep ': supported targets:.* elf' > /dev/null; then
- archive_cmds='$CC -shared $libobjs $deplibs $compiler_flags ${wl}-soname $wl$soname -o $lib'
- archive_expsym_cmds='$CC -shared $libobjs $deplibs $compiler_flags ${wl}-soname $wl$soname ${wl}-retain-symbols-file $wl$export_symbols -o $lib'
- else
- ld_shlibs=no
- fi
- ;;
-
- sysv5* | sco3.2v5* | sco5v6* | unixware* | OpenUNIX*)
- case `$LD -v 2>&1` in
- *\ [01].* | *\ 2.[0-9].* | *\ 2.1[0-5].*)
- ld_shlibs=no
- cat <<_LT_EOF 1>&2
-
-*** Warning: Releases of the GNU linker prior to 2.16.91.0.3 can not
-*** reliably create shared libraries on SCO systems. Therefore, libtool
-*** is disabling shared libraries support. We urge you to upgrade GNU
-*** binutils to release 2.16.91.0.3 or newer. Another option is to modify
-*** your PATH or compiler configuration so that the native linker is
-*** used, and then restart.
-
-_LT_EOF
- ;;
- *)
- if $LD --help 2>&1 | grep ': supported targets:.* elf' > /dev/null; then
- hardcode_libdir_flag_spec='`test -z "$SCOABSPATH" && echo ${wl}-rpath,$libdir`'
- archive_cmds='$CC -shared $libobjs $deplibs $compiler_flags ${wl}-soname,\${SCOABSPATH:+${install_libdir}/}$soname -o $lib'
- archive_expsym_cmds='$CC -shared $libobjs $deplibs $compiler_flags ${wl}-soname,\${SCOABSPATH:+${install_libdir}/}$soname,-retain-symbols-file,$export_symbols -o $lib'
- else
- ld_shlibs=no
- fi
- ;;
- esac
- ;;
-
- sunos4*)
- archive_cmds='$LD -assert pure-text -Bshareable -o $lib $libobjs $deplibs $linker_flags'
- wlarc=
- hardcode_direct=yes
- hardcode_shlibpath_var=no
- ;;
-
- *)
- if $LD --help 2>&1 | grep ': supported targets:.* elf' > /dev/null; then
- archive_cmds='$CC -shared $libobjs $deplibs $compiler_flags ${wl}-soname $wl$soname -o $lib'
- archive_expsym_cmds='$CC -shared $libobjs $deplibs $compiler_flags ${wl}-soname $wl$soname ${wl}-retain-symbols-file $wl$export_symbols -o $lib'
- else
- ld_shlibs=no
- fi
- ;;
- esac
-
- if test "$ld_shlibs" = no; then
- runpath_var=
- hardcode_libdir_flag_spec=
- export_dynamic_flag_spec=
- whole_archive_flag_spec=
- fi
- else
- # PORTME fill in a description of your system's linker (not GNU ld)
- case $host_os in
- aix3*)
- allow_undefined_flag=unsupported
- always_export_symbols=yes
- archive_expsym_cmds='$LD -o $output_objdir/$soname $libobjs $deplibs $linker_flags -bE:$export_symbols -T512 -H512 -bM:SRE~$AR $AR_FLAGS $lib $output_objdir/$soname'
- # Note: this linker hardcodes the directories in LIBPATH if there
- # are no directories specified by -L.
- hardcode_minus_L=yes
- if test "$GCC" = yes && test -z "$lt_prog_compiler_static"; then
- # Neither direct hardcoding nor static linking is supported with a
- # broken collect2.
- hardcode_direct=unsupported
- fi
- ;;
-
- aix[4-9]*)
- if test "$host_cpu" = ia64; then
- # On IA64, the linker does run time linking by default, so we don't
- # have to do anything special.
- aix_use_runtimelinking=no
- exp_sym_flag='-Bexport'
- no_entry_flag=""
- else
- # If we're using GNU nm, then we don't want the "-C" option.
- # -C means demangle to AIX nm, but means don't demangle with GNU nm
- if $NM -V 2>&1 | grep 'GNU' > /dev/null; then
- export_symbols_cmds='$NM -Bpg $libobjs $convenience | awk '\''{ if (((\$2 == "T") || (\$2 == "D") || (\$2 == "B")) && (substr(\$3,1,1) != ".")) { print \$3 } }'\'' | sort -u > $export_symbols'
- else
- export_symbols_cmds='$NM -BCpg $libobjs $convenience | awk '\''{ if (((\$2 == "T") || (\$2 == "D") || (\$2 == "B")) && (substr(\$3,1,1) != ".")) { print \$3 } }'\'' | sort -u > $export_symbols'
- fi
- aix_use_runtimelinking=no
-
- # Test if we are trying to use run time linking or normal
- # AIX style linking. If -brtl is somewhere in LDFLAGS, we
- # need to do runtime linking.
- case $host_os in aix4.[23]|aix4.[23].*|aix[5-9]*)
- for ld_flag in $LDFLAGS; do
- if (test $ld_flag = "-brtl" || test $ld_flag = "-Wl,-brtl"); then
- aix_use_runtimelinking=yes
- break
- fi
- done
- ;;
- esac
-
- exp_sym_flag='-bexport'
- no_entry_flag='-bnoentry'
- fi
-
- # When large executables or shared objects are built, AIX ld can
- # have problems creating the table of contents. If linking a library
- # or program results in "error TOC overflow" add -mminimal-toc to
- # CXXFLAGS/CFLAGS for g++/gcc. In the cases where that is not
- # enough to fix the problem, add -Wl,-bbigtoc to LDFLAGS.
-
- archive_cmds=''
- hardcode_direct=yes
- hardcode_libdir_separator=':'
- link_all_deplibs=yes
-
- if test "$GCC" = yes; then
- case $host_os in aix4.[012]|aix4.[012].*)
- # We only want to do this on AIX 4.2 and lower, the check
- # below for broken collect2 doesn't work under 4.3+
- collect2name=`${CC} -print-prog-name=collect2`
- if test -f "$collect2name" && \
- strings "$collect2name" | grep resolve_lib_name >/dev/null
- then
- # We have reworked collect2
- :
- else
- # We have old collect2
- hardcode_direct=unsupported
- # It fails to find uninstalled libraries when the uninstalled
- # path is not listed in the libpath. Setting hardcode_minus_L
- # to unsupported forces relinking
- hardcode_minus_L=yes
- hardcode_libdir_flag_spec='-L$libdir'
- hardcode_libdir_separator=
- fi
- ;;
- esac
- shared_flag='-shared'
- if test "$aix_use_runtimelinking" = yes; then
- shared_flag="$shared_flag "'${wl}-G'
- fi
- else
- # not using gcc
- if test "$host_cpu" = ia64; then
- # VisualAge C++, Version 5.5 for AIX 5L for IA-64, Beta 3 Release
- # chokes on -Wl,-G. The following line is correct:
- shared_flag='-G'
- else
- if test "$aix_use_runtimelinking" = yes; then
- shared_flag='${wl}-G'
- else
- shared_flag='${wl}-bM:SRE'
- fi
- fi
- fi
-
- # It seems that -bexpall does not export symbols beginning with
- # underscore (_), so it is better to generate a list of symbols to export.
- always_export_symbols=yes
- if test "$aix_use_runtimelinking" = yes; then
- # Warning - without using the other runtime loading flags (-brtl),
- # -berok will link without error, but may produce a broken library.
- allow_undefined_flag='-berok'
- # Determine the default libpath from the value encoded in an empty executable.
- cat >conftest.$ac_ext <<_ACEOF
-/* confdefs.h. */
-_ACEOF
-cat confdefs.h >>conftest.$ac_ext
-cat >>conftest.$ac_ext <<_ACEOF
-/* end confdefs.h. */
-
-int
-main ()
-{
-
- ;
- return 0;
-}
-_ACEOF
-rm -f conftest.$ac_objext conftest$ac_exeext
-if { (ac_try="$ac_link"
-case "(($ac_try" in
- *\"* | *\`* | *\\*) ac_try_echo=\$ac_try;;
- *) ac_try_echo=$ac_try;;
-esac
-eval ac_try_echo="\"\$as_me:$LINENO: $ac_try_echo\""
-$as_echo "$ac_try_echo") >&5
- (eval "$ac_link") 2>conftest.er1
- ac_status=$?
- grep -v '^ *+' conftest.er1 >conftest.err
- rm -f conftest.er1
- cat conftest.err >&5
- $as_echo "$as_me:$LINENO: \$? = $ac_status" >&5
- (exit $ac_status); } && {
- test -z "$ac_c_werror_flag" ||
- test ! -s conftest.err
- } && test -s conftest$ac_exeext && {
- test "$cross_compiling" = yes ||
- $as_test_x conftest$ac_exeext
- }; then
-
-lt_aix_libpath_sed='
- /Import File Strings/,/^$/ {
- /^0/ {
- s/^0 *\(.*\)$/\1/
- p
- }
- }'
-aix_libpath=`dump -H conftest$ac_exeext 2>/dev/null | $SED -n -e "$lt_aix_libpath_sed"`
-# Check for a 64-bit object if we didn't find anything.
-if test -z "$aix_libpath"; then
- aix_libpath=`dump -HX64 conftest$ac_exeext 2>/dev/null | $SED -n -e "$lt_aix_libpath_sed"`
-fi
-else
- $as_echo "$as_me: failed program was:" >&5
-sed 's/^/| /' conftest.$ac_ext >&5
-
-
-fi
-
-rm -rf conftest.dSYM
-rm -f core conftest.err conftest.$ac_objext conftest_ipa8_conftest.oo \
- conftest$ac_exeext conftest.$ac_ext
-if test -z "$aix_libpath"; then aix_libpath="/usr/lib:/lib"; fi
-
- hardcode_libdir_flag_spec='${wl}-blibpath:$libdir:'"$aix_libpath"
- archive_expsym_cmds="\$CC"' -o $output_objdir/$soname $libobjs $deplibs '"\${wl}$no_entry_flag"' $compiler_flags `if test "x${allow_undefined_flag}" != "x"; then echo "${wl}${allow_undefined_flag}"; else :; fi` '"\${wl}$exp_sym_flag:\$export_symbols $shared_flag"
- else
- if test "$host_cpu" = ia64; then
- hardcode_libdir_flag_spec='${wl}-R $libdir:/usr/lib:/lib'
- allow_undefined_flag="-z nodefs"
- archive_expsym_cmds="\$CC $shared_flag"' -o $output_objdir/$soname $libobjs $deplibs '"\${wl}$no_entry_flag"' $compiler_flags ${wl}${allow_undefined_flag} '"\${wl}$exp_sym_flag:\$export_symbols"
- else
- # Determine the default libpath from the value encoded in an empty executable.
- cat >conftest.$ac_ext <<_ACEOF
-/* confdefs.h. */
-_ACEOF
-cat confdefs.h >>conftest.$ac_ext
-cat >>conftest.$ac_ext <<_ACEOF
-/* end confdefs.h. */
-
-int
-main ()
-{
-
- ;
- return 0;
-}
-_ACEOF
-rm -f conftest.$ac_objext conftest$ac_exeext
-if { (ac_try="$ac_link"
-case "(($ac_try" in
- *\"* | *\`* | *\\*) ac_try_echo=\$ac_try;;
- *) ac_try_echo=$ac_try;;
-esac
-eval ac_try_echo="\"\$as_me:$LINENO: $ac_try_echo\""
-$as_echo "$ac_try_echo") >&5
- (eval "$ac_link") 2>conftest.er1
- ac_status=$?
- grep -v '^ *+' conftest.er1 >conftest.err
- rm -f conftest.er1
- cat conftest.err >&5
- $as_echo "$as_me:$LINENO: \$? = $ac_status" >&5
- (exit $ac_status); } && {
- test -z "$ac_c_werror_flag" ||
- test ! -s conftest.err
- } && test -s conftest$ac_exeext && {
- test "$cross_compiling" = yes ||
- $as_test_x conftest$ac_exeext
- }; then
-
-lt_aix_libpath_sed='
- /Import File Strings/,/^$/ {
- /^0/ {
- s/^0 *\(.*\)$/\1/
- p
- }
- }'
-aix_libpath=`dump -H conftest$ac_exeext 2>/dev/null | $SED -n -e "$lt_aix_libpath_sed"`
-# Check for a 64-bit object if we didn't find anything.
-if test -z "$aix_libpath"; then
- aix_libpath=`dump -HX64 conftest$ac_exeext 2>/dev/null | $SED -n -e "$lt_aix_libpath_sed"`
-fi
-else
- $as_echo "$as_me: failed program was:" >&5
-sed 's/^/| /' conftest.$ac_ext >&5
-
-
-fi
-
-rm -rf conftest.dSYM
-rm -f core conftest.err conftest.$ac_objext conftest_ipa8_conftest.oo \
- conftest$ac_exeext conftest.$ac_ext
-if test -z "$aix_libpath"; then aix_libpath="/usr/lib:/lib"; fi
-
- hardcode_libdir_flag_spec='${wl}-blibpath:$libdir:'"$aix_libpath"
- # Warning - without using the other run time loading flags,
- # -berok will link without error, but may produce a broken library.
- no_undefined_flag=' ${wl}-bernotok'
- allow_undefined_flag=' ${wl}-berok'
- # Exported symbols can be pulled into shared objects from archives
- whole_archive_flag_spec='$convenience'
- archive_cmds_need_lc=yes
- # This is similar to how AIX traditionally builds its shared libraries.
- archive_expsym_cmds="\$CC $shared_flag"' -o $output_objdir/$soname $libobjs $deplibs ${wl}-bnoentry $compiler_flags ${wl}-bE:$export_symbols${allow_undefined_flag}~$AR $AR_FLAGS $output_objdir/$libname$release.a $output_objdir/$soname'
- fi
- fi
- ;;
-
- amigaos*)
- archive_cmds='$rm $output_objdir/a2ixlibrary.data~$echo "#define NAME $libname" > $output_objdir/a2ixlibrary.data~$echo "#define LIBRARY_ID 1" >> $output_objdir/a2ixlibrary.data~$echo "#define VERSION $major" >> $output_objdir/a2ixlibrary.data~$echo "#define REVISION $revision" >> $output_objdir/a2ixlibrary.data~$AR $AR_FLAGS $lib $libobjs~$RANLIB $lib~(cd $output_objdir && a2ixlibrary -32)'
- hardcode_libdir_flag_spec='-L$libdir'
- hardcode_minus_L=yes
- # see comment about different semantics on the GNU ld section
- ld_shlibs=no
- ;;
-
- bsdi[45]*)
- export_dynamic_flag_spec=-rdynamic
- ;;
-
- cygwin* | mingw* | pw32*)
- # When not using gcc, we currently assume that we are using
- # Microsoft Visual C++.
- # hardcode_libdir_flag_spec is actually meaningless, as there is
- # no search path for DLLs.
- hardcode_libdir_flag_spec=' '
- allow_undefined_flag=unsupported
- # Tell ltmain to make .lib files, not .a files.
- libext=lib
- # Tell ltmain to make .dll files, not .so files.
- shrext_cmds=".dll"
- # FIXME: Setting linknames here is a bad hack.
- archive_cmds='$CC -o $lib $libobjs $compiler_flags `echo "$deplibs" | $SED -e '\''s/ -lc$//'\''` -link -dll~linknames='
- # The linker will automatically build a .lib file if we build a DLL.
- old_archive_From_new_cmds='true'
- # FIXME: Should let the user specify the lib program.
- old_archive_cmds='lib -OUT:$oldlib$oldobjs$old_deplibs'
- fix_srcfile_path='`cygpath -w "$srcfile"`'
- enable_shared_with_static_runtimes=yes
- ;;
-
- darwin* | rhapsody*)
- case $host_os in
- rhapsody* | darwin1.[012])
- allow_undefined_flag='${wl}-undefined ${wl}suppress'
- ;;
- *) # Darwin 1.3 on
- if test -z ${MACOSX_DEPLOYMENT_TARGET} ; then
- allow_undefined_flag='${wl}-flat_namespace ${wl}-undefined ${wl}suppress'
- else
- case ${MACOSX_DEPLOYMENT_TARGET} in
- 10.[012])
- allow_undefined_flag='${wl}-flat_namespace ${wl}-undefined ${wl}suppress'
- ;;
- 10.*)
- allow_undefined_flag='${wl}-undefined ${wl}dynamic_lookup'
- ;;
- esac
- fi
- ;;
- esac
- archive_cmds_need_lc=no
- hardcode_direct=no
- hardcode_automatic=yes
- hardcode_shlibpath_var=unsupported
- whole_archive_flag_spec=''
- link_all_deplibs=yes
- if test "$GCC" = yes ; then
- output_verbose_link_cmd='echo'
- archive_cmds="\$CC -dynamiclib \$allow_undefined_flag -o \$lib \$libobjs \$deplibs \$compiler_flags -install_name \$rpath/\$soname \$verstring $_lt_dar_single_mod${_lt_dsymutil}"
- module_cmds="\$CC \$allow_undefined_flag -o \$lib -bundle \$libobjs \$deplibs \$compiler_flags${_lt_dsymutil}"
- archive_expsym_cmds="sed 's,^,_,' < \$export_symbols > \$output_objdir/\${libname}-symbols.expsym~\$CC -dynamiclib \$allow_undefined_flag -o \$lib \$libobjs \$deplibs \$compiler_flags -install_name \$rpath/\$soname \$verstring ${_lt_dar_single_mod}${_lt_dar_export_syms}${_lt_dsymutil}"
- module_expsym_cmds="sed -e 's,^,_,' < \$export_symbols > \$output_objdir/\${libname}-symbols.expsym~\$CC \$allow_undefined_flag -o \$lib -bundle \$libobjs \$deplibs \$compiler_flags${_lt_dar_export_syms}${_lt_dsymutil}"
- else
- case $cc_basename in
- xlc*)
- output_verbose_link_cmd='echo'
- archive_cmds='$CC -qmkshrobj $allow_undefined_flag -o $lib $libobjs $deplibs $compiler_flags ${wl}-install_name ${wl}`echo $rpath/$soname` $xlcverstring'
- module_cmds='$CC $allow_undefined_flag -o $lib -bundle $libobjs $deplibs$compiler_flags'
- # Don't fix this by using the ld -exported_symbols_list flag, it doesn't exist in older darwin lds
- archive_expsym_cmds='sed -e "s,#.*,," -e "s,^[ ]*,," -e "s,^\(..*\),_&," < $export_symbols > $output_objdir/${libname}-symbols.expsym~$CC -qmkshrobj $allow_undefined_flag -o $lib $libobjs $deplibs $compiler_flags ${wl}-install_name ${wl}$rpath/$soname $xlcverstring~nmedit -s $output_objdir/${libname}-symbols.expsym ${lib}'
- module_expsym_cmds='sed -e "s,#.*,," -e "s,^[ ]*,," -e "s,^\(..*\),_&," < $export_symbols > $output_objdir/${libname}-symbols.expsym~$CC $allow_undefined_flag -o $lib -bundle $libobjs $deplibs$compiler_flags~nmedit -s $output_objdir/${libname}-symbols.expsym ${lib}'
- ;;
- *)
- ld_shlibs=no
- ;;
- esac
- fi
- ;;
-
- dgux*)
- archive_cmds='$LD -G -h $soname -o $lib $libobjs $deplibs $linker_flags'
- hardcode_libdir_flag_spec='-L$libdir'
- hardcode_shlibpath_var=no
- ;;
-
- freebsd1*)
- ld_shlibs=no
- ;;
-
- # FreeBSD 2.2.[012] allows us to include c++rt0.o to get C++ constructor
- # support. Future versions do this automatically, but an explicit c++rt0.o
- # does not break anything, and helps significantly (at the cost of a little
- # extra space).
- freebsd2.2*)
- archive_cmds='$LD -Bshareable -o $lib $libobjs $deplibs $linker_flags /usr/lib/c++rt0.o'
- hardcode_libdir_flag_spec='-R$libdir'
- hardcode_direct=yes
- hardcode_shlibpath_var=no
- ;;
-
- # Unfortunately, older versions of FreeBSD 2 do not have this feature.
- freebsd2*)
- archive_cmds='$LD -Bshareable -o $lib $libobjs $deplibs $linker_flags'
- hardcode_direct=yes
- hardcode_minus_L=yes
- hardcode_shlibpath_var=no
- ;;
-
- # FreeBSD 3 and greater uses gcc -shared to do shared libraries.
- freebsd* | dragonfly*)
- archive_cmds='$CC -shared -o $lib $libobjs $deplibs $compiler_flags'
- hardcode_libdir_flag_spec='-R$libdir'
- hardcode_direct=yes
- hardcode_shlibpath_var=no
- ;;
-
- hpux9*)
- if test "$GCC" = yes; then
- archive_cmds='$rm $output_objdir/$soname~$CC -shared -fPIC ${wl}+b ${wl}$install_libdir -o $output_objdir/$soname $libobjs $deplibs $compiler_flags~test $output_objdir/$soname = $lib || mv $output_objdir/$soname $lib'
- else
- archive_cmds='$rm $output_objdir/$soname~$LD -b +b $install_libdir -o $output_objdir/$soname $libobjs $deplibs $linker_flags~test $output_objdir/$soname = $lib || mv $output_objdir/$soname $lib'
- fi
- hardcode_libdir_flag_spec='${wl}+b ${wl}$libdir'
- hardcode_libdir_separator=:
- hardcode_direct=yes
-
- # hardcode_minus_L: Not really in the search PATH,
- # but as the default location of the library.
- hardcode_minus_L=yes
- export_dynamic_flag_spec='${wl}-E'
- ;;
-
- hpux10*)
- if test "$GCC" = yes -a "$with_gnu_ld" = no; then
- archive_cmds='$CC -shared -fPIC ${wl}+h ${wl}$soname ${wl}+b ${wl}$install_libdir -o $lib $libobjs $deplibs $compiler_flags'
- else
- archive_cmds='$LD -b +h $soname +b $install_libdir -o $lib $libobjs $deplibs $linker_flags'
- fi
- if test "$with_gnu_ld" = no; then
- hardcode_libdir_flag_spec='${wl}+b ${wl}$libdir'
- hardcode_libdir_separator=:
-
- hardcode_direct=yes
- export_dynamic_flag_spec='${wl}-E'
-
- # hardcode_minus_L: Not really in the search PATH,
- # but as the default location of the library.
- hardcode_minus_L=yes
- fi
- ;;
-
- hpux11*)
- if test "$GCC" = yes -a "$with_gnu_ld" = no; then
- case $host_cpu in
- hppa*64*)
- archive_cmds='$CC -shared ${wl}+h ${wl}$soname -o $lib $libobjs $deplibs $compiler_flags'
- ;;
- ia64*)
- archive_cmds='$CC -shared ${wl}+h ${wl}$soname ${wl}+nodefaultrpath -o $lib $libobjs $deplibs $compiler_flags'
- ;;
- *)
- archive_cmds='$CC -shared -fPIC ${wl}+h ${wl}$soname ${wl}+b ${wl}$install_libdir -o $lib $libobjs $deplibs $compiler_flags'
- ;;
- esac
- else
- case $host_cpu in
- hppa*64*)
- archive_cmds='$CC -b ${wl}+h ${wl}$soname -o $lib $libobjs $deplibs $compiler_flags'
- ;;
- ia64*)
- archive_cmds='$CC -b ${wl}+h ${wl}$soname ${wl}+nodefaultrpath -o $lib $libobjs $deplibs $compiler_flags'
- ;;
- *)
- archive_cmds='$CC -b ${wl}+h ${wl}$soname ${wl}+b ${wl}$install_libdir -o $lib $libobjs $deplibs $compiler_flags'
- ;;
- esac
- fi
- if test "$with_gnu_ld" = no; then
- hardcode_libdir_flag_spec='${wl}+b ${wl}$libdir'
- hardcode_libdir_separator=:
-
- case $host_cpu in
- hppa*64*|ia64*)
- hardcode_libdir_flag_spec_ld='+b $libdir'
- hardcode_direct=no
- hardcode_shlibpath_var=no
- ;;
- *)
- hardcode_direct=yes
- export_dynamic_flag_spec='${wl}-E'
-
- # hardcode_minus_L: Not really in the search PATH,
- # but as the default location of the library.
- hardcode_minus_L=yes
- ;;
- esac
- fi
- ;;
-
- irix5* | irix6* | nonstopux*)
- if test "$GCC" = yes; then
- archive_cmds='$CC -shared $libobjs $deplibs $compiler_flags ${wl}-soname ${wl}$soname `test -n "$verstring" && echo ${wl}-set_version ${wl}$verstring` ${wl}-update_registry ${wl}${output_objdir}/so_locations -o $lib'
- else
- archive_cmds='$LD -shared $libobjs $deplibs $linker_flags -soname $soname `test -n "$verstring" && echo -set_version $verstring` -update_registry ${output_objdir}/so_locations -o $lib'
- hardcode_libdir_flag_spec_ld='-rpath $libdir'
- fi
- hardcode_libdir_flag_spec='${wl}-rpath ${wl}$libdir'
- hardcode_libdir_separator=:
- link_all_deplibs=yes
- ;;
-
- netbsd*)
- if echo __ELF__ | $CC -E - | grep __ELF__ >/dev/null; then
- archive_cmds='$LD -Bshareable -o $lib $libobjs $deplibs $linker_flags' # a.out
- else
- archive_cmds='$LD -shared -o $lib $libobjs $deplibs $linker_flags' # ELF
- fi
- hardcode_libdir_flag_spec='-R$libdir'
- hardcode_direct=yes
- hardcode_shlibpath_var=no
- ;;
-
- newsos6)
- archive_cmds='$LD -G -h $soname -o $lib $libobjs $deplibs $linker_flags'
- hardcode_direct=yes
- hardcode_libdir_flag_spec='${wl}-rpath ${wl}$libdir'
- hardcode_libdir_separator=:
- hardcode_shlibpath_var=no
- ;;
-
- openbsd*)
- if test -f /usr/libexec/ld.so; then
- hardcode_direct=yes
- hardcode_shlibpath_var=no
- if test -z "`echo __ELF__ | $CC -E - | grep __ELF__`" || test "$host_os-$host_cpu" = "openbsd2.8-powerpc"; then
- archive_cmds='$CC -shared $pic_flag -o $lib $libobjs $deplibs $compiler_flags'
- archive_expsym_cmds='$CC -shared $pic_flag -o $lib $libobjs $deplibs $compiler_flags ${wl}-retain-symbols-file,$export_symbols'
- hardcode_libdir_flag_spec='${wl}-rpath,$libdir'
- export_dynamic_flag_spec='${wl}-E'
- else
- case $host_os in
- openbsd[01].* | openbsd2.[0-7] | openbsd2.[0-7].*)
- archive_cmds='$LD -Bshareable -o $lib $libobjs $deplibs $linker_flags'
- hardcode_libdir_flag_spec='-R$libdir'
- ;;
- *)
- archive_cmds='$CC -shared $pic_flag -o $lib $libobjs $deplibs $compiler_flags'
- hardcode_libdir_flag_spec='${wl}-rpath,$libdir'
- ;;
- esac
- fi
- else
- ld_shlibs=no
- fi
- ;;
-
- os2*)
- hardcode_libdir_flag_spec='-L$libdir'
- hardcode_minus_L=yes
- allow_undefined_flag=unsupported
- archive_cmds='$echo "LIBRARY $libname INITINSTANCE" > $output_objdir/$libname.def~$echo "DESCRIPTION \"$libname\"" >> $output_objdir/$libname.def~$echo DATA >> $output_objdir/$libname.def~$echo " SINGLE NONSHARED" >> $output_objdir/$libname.def~$echo EXPORTS >> $output_objdir/$libname.def~emxexp $libobjs >> $output_objdir/$libname.def~$CC -Zdll -Zcrtdll -o $lib $libobjs $deplibs $compiler_flags $output_objdir/$libname.def'
- old_archive_From_new_cmds='emximp -o $output_objdir/$libname.a $output_objdir/$libname.def'
- ;;
-
- osf3*)
- if test "$GCC" = yes; then
- allow_undefined_flag=' ${wl}-expect_unresolved ${wl}\*'
- archive_cmds='$CC -shared${allow_undefined_flag} $libobjs $deplibs $compiler_flags ${wl}-soname ${wl}$soname `test -n "$verstring" && echo ${wl}-set_version ${wl}$verstring` ${wl}-update_registry ${wl}${output_objdir}/so_locations -o $lib'
- else
- allow_undefined_flag=' -expect_unresolved \*'
- archive_cmds='$LD -shared${allow_undefined_flag} $libobjs $deplibs $linker_flags -soname $soname `test -n "$verstring" && echo -set_version $verstring` -update_registry ${output_objdir}/so_locations -o $lib'
- fi
- hardcode_libdir_flag_spec='${wl}-rpath ${wl}$libdir'
- hardcode_libdir_separator=:
- ;;
-
- osf4* | osf5*) # as osf3* with the addition of -msym flag
- if test "$GCC" = yes; then
- allow_undefined_flag=' ${wl}-expect_unresolved ${wl}\*'
- archive_cmds='$CC -shared${allow_undefined_flag} $libobjs $deplibs $compiler_flags ${wl}-msym ${wl}-soname ${wl}$soname `test -n "$verstring" && echo ${wl}-set_version ${wl}$verstring` ${wl}-update_registry ${wl}${output_objdir}/so_locations -o $lib'
- hardcode_libdir_flag_spec='${wl}-rpath ${wl}$libdir'
- else
- allow_undefined_flag=' -expect_unresolved \*'
- archive_cmds='$LD -shared${allow_undefined_flag} $libobjs $deplibs $linker_flags -msym -soname $soname `test -n "$verstring" && echo -set_version $verstring` -update_registry ${output_objdir}/so_locations -o $lib'
- archive_expsym_cmds='for i in `cat $export_symbols`; do printf "%s %s\\n" -exported_symbol "\$i" >> $lib.exp; done; echo "-hidden">> $lib.exp~
- $LD -shared${allow_undefined_flag} -input $lib.exp $linker_flags $libobjs $deplibs -soname $soname `test -n "$verstring" && echo -set_version $verstring` -update_registry ${output_objdir}/so_locations -o $lib~$rm $lib.exp'
-
- # Both c and cxx compiler support -rpath directly
- hardcode_libdir_flag_spec='-rpath $libdir'
- fi
- hardcode_libdir_separator=:
- ;;
-
- solaris*)
- no_undefined_flag=' -z text'
- if test "$GCC" = yes; then
- wlarc='${wl}'
- archive_cmds='$CC -shared ${wl}-h ${wl}$soname -o $lib $libobjs $deplibs $compiler_flags'
- archive_expsym_cmds='$echo "{ global:" > $lib.exp~cat $export_symbols | $SED -e "s/\(.*\)/\1;/" >> $lib.exp~$echo "local: *; };" >> $lib.exp~
- $CC -shared ${wl}-M ${wl}$lib.exp ${wl}-h ${wl}$soname -o $lib $libobjs $deplibs $compiler_flags~$rm $lib.exp'
- else
- wlarc=''
- archive_cmds='$LD -G${allow_undefined_flag} -h $soname -o $lib $libobjs $deplibs $linker_flags'
- archive_expsym_cmds='$echo "{ global:" > $lib.exp~cat $export_symbols | $SED -e "s/\(.*\)/\1;/" >> $lib.exp~$echo "local: *; };" >> $lib.exp~
- $LD -G${allow_undefined_flag} -M $lib.exp -h $soname -o $lib $libobjs $deplibs $linker_flags~$rm $lib.exp'
- fi
- hardcode_libdir_flag_spec='-R$libdir'
- hardcode_shlibpath_var=no
- case $host_os in
- solaris2.[0-5] | solaris2.[0-5].*) ;;
- *)
- # The compiler driver will combine and reorder linker options,
- # but understands `-z linker_flag'. GCC discards it without `$wl',
- # but is careful enough not to reorder.
- # Supported since Solaris 2.6 (maybe 2.5.1?)
- if test "$GCC" = yes; then
- whole_archive_flag_spec='${wl}-z ${wl}allextract$convenience ${wl}-z ${wl}defaultextract'
- else
- whole_archive_flag_spec='-z allextract$convenience -z defaultextract'
- fi
- ;;
- esac
- link_all_deplibs=yes
- ;;
-
- sunos4*)
- if test "x$host_vendor" = xsequent; then
- # Use $CC to link under sequent, because it throws in some extra .o
- # files that make .init and .fini sections work.
- archive_cmds='$CC -G ${wl}-h $soname -o $lib $libobjs $deplibs $compiler_flags'
- else
- archive_cmds='$LD -assert pure-text -Bstatic -o $lib $libobjs $deplibs $linker_flags'
- fi
- hardcode_libdir_flag_spec='-L$libdir'
- hardcode_direct=yes
- hardcode_minus_L=yes
- hardcode_shlibpath_var=no
- ;;
-
- sysv4)
- case $host_vendor in
- sni)
- archive_cmds='$LD -G -h $soname -o $lib $libobjs $deplibs $linker_flags'
- hardcode_direct=yes # is this really true???
- ;;
- siemens)
- ## LD is ld it makes a PLAMLIB
- ## CC just makes a GrossModule.
- archive_cmds='$LD -G -o $lib $libobjs $deplibs $linker_flags'
- reload_cmds='$CC -r -o $output$reload_objs'
- hardcode_direct=no
- ;;
- motorola)
- archive_cmds='$LD -G -h $soname -o $lib $libobjs $deplibs $linker_flags'
- hardcode_direct=no #Motorola manual says yes, but my tests say they lie
- ;;
- esac
- runpath_var='LD_RUN_PATH'
- hardcode_shlibpath_var=no
- ;;
-
- sysv4.3*)
- archive_cmds='$LD -G -h $soname -o $lib $libobjs $deplibs $linker_flags'
- hardcode_shlibpath_var=no
- export_dynamic_flag_spec='-Bexport'
- ;;
-
- sysv4*MP*)
- if test -d /usr/nec; then
- archive_cmds='$LD -G -h $soname -o $lib $libobjs $deplibs $linker_flags'
- hardcode_shlibpath_var=no
- runpath_var=LD_RUN_PATH
- hardcode_runpath_var=yes
- ld_shlibs=yes
- fi
- ;;
-
- sysv4*uw2* | sysv5OpenUNIX* | sysv5UnixWare7.[01].[10]* | unixware7* | sco3.2v5.0.[024]*)
- no_undefined_flag='${wl}-z,text'
- archive_cmds_need_lc=no
- hardcode_shlibpath_var=no
- runpath_var='LD_RUN_PATH'
-
- if test "$GCC" = yes; then
- archive_cmds='$CC -shared ${wl}-h,$soname -o $lib $libobjs $deplibs $compiler_flags'
- archive_expsym_cmds='$CC -shared ${wl}-Bexport:$export_symbols ${wl}-h,$soname -o $lib $libobjs $deplibs $compiler_flags'
- else
- archive_cmds='$CC -G ${wl}-h,$soname -o $lib $libobjs $deplibs $compiler_flags'
- archive_expsym_cmds='$CC -G ${wl}-Bexport:$export_symbols ${wl}-h,$soname -o $lib $libobjs $deplibs $compiler_flags'
- fi
- ;;
-
- sysv5* | sco3.2v5* | sco5v6*)
- # Note: We can NOT use -z defs as we might desire, because we do not
- # link with -lc, and that would cause any symbols used from libc to
- # always be unresolved, which means just about no library would
- # ever link correctly. If we're not using GNU ld we use -z text
- # though, which does catch some bad symbols but isn't as heavy-handed
- # as -z defs.
- no_undefined_flag='${wl}-z,text'
- allow_undefined_flag='${wl}-z,nodefs'
- archive_cmds_need_lc=no
- hardcode_shlibpath_var=no
- hardcode_libdir_flag_spec='`test -z "$SCOABSPATH" && echo ${wl}-R,$libdir`'
- hardcode_libdir_separator=':'
- link_all_deplibs=yes
- export_dynamic_flag_spec='${wl}-Bexport'
- runpath_var='LD_RUN_PATH'
-
- if test "$GCC" = yes; then
- archive_cmds='$CC -shared ${wl}-h,\${SCOABSPATH:+${install_libdir}/}$soname -o $lib $libobjs $deplibs $compiler_flags'
- archive_expsym_cmds='$CC -shared ${wl}-Bexport:$export_symbols ${wl}-h,\${SCOABSPATH:+${install_libdir}/}$soname -o $lib $libobjs $deplibs $compiler_flags'
- else
- archive_cmds='$CC -G ${wl}-h,\${SCOABSPATH:+${install_libdir}/}$soname -o $lib $libobjs $deplibs $compiler_flags'
- archive_expsym_cmds='$CC -G ${wl}-Bexport:$export_symbols ${wl}-h,\${SCOABSPATH:+${install_libdir}/}$soname -o $lib $libobjs $deplibs $compiler_flags'
- fi
- ;;
-
- uts4*)
- archive_cmds='$LD -G -h $soname -o $lib $libobjs $deplibs $linker_flags'
- hardcode_libdir_flag_spec='-L$libdir'
- hardcode_shlibpath_var=no
- ;;
-
- *)
- ld_shlibs=no
- ;;
- esac
- fi
-
-{ $as_echo "$as_me:$LINENO: result: $ld_shlibs" >&5
-$as_echo "$ld_shlibs" >&6; }
-test "$ld_shlibs" = no && can_build_shared=no
-
-#
-# Do we need to explicitly link libc?
-#
-case "x$archive_cmds_need_lc" in
-x|xyes)
- # Assume -lc should be added
- archive_cmds_need_lc=yes
-
- if test "$enable_shared" = yes && test "$GCC" = yes; then
- case $archive_cmds in
- *'~'*)
- # FIXME: we may have to deal with multi-command sequences.
- ;;
- '$CC '*)
- # Test whether the compiler implicitly links with -lc since on some
- # systems, -lgcc has to come before -lc. If gcc already passes -lc
- # to ld, don't add -lc before -lgcc.
- { $as_echo "$as_me:$LINENO: checking whether -lc should be explicitly linked in" >&5
-$as_echo_n "checking whether -lc should be explicitly linked in... " >&6; }
- $rm conftest*
- echo "$lt_simple_compile_test_code" > conftest.$ac_ext
-
- if { (eval echo "$as_me:$LINENO: \"$ac_compile\"") >&5
- (eval $ac_compile) 2>&5
- ac_status=$?
- $as_echo "$as_me:$LINENO: \$? = $ac_status" >&5
- (exit $ac_status); } 2>conftest.err; then
- soname=conftest
- lib=conftest
- libobjs=conftest.$ac_objext
- deplibs=
- wl=$lt_prog_compiler_wl
- pic_flag=$lt_prog_compiler_pic
- compiler_flags=-v
- linker_flags=-v
- verstring=
- output_objdir=.
- libname=conftest
- lt_save_allow_undefined_flag=$allow_undefined_flag
- allow_undefined_flag=
- if { (eval echo "$as_me:$LINENO: \"$archive_cmds 2\>\&1 \| grep \" -lc \" \>/dev/null 2\>\&1\"") >&5
- (eval $archive_cmds 2\>\&1 \| grep \" -lc \" \>/dev/null 2\>\&1) 2>&5
- ac_status=$?
- $as_echo "$as_me:$LINENO: \$? = $ac_status" >&5
- (exit $ac_status); }
- then
- archive_cmds_need_lc=no
- else
- archive_cmds_need_lc=yes
- fi
- allow_undefined_flag=$lt_save_allow_undefined_flag
- else
- cat conftest.err 1>&5
- fi
- $rm conftest*
- { $as_echo "$as_me:$LINENO: result: $archive_cmds_need_lc" >&5
-$as_echo "$archive_cmds_need_lc" >&6; }
- ;;
- esac
- fi
- ;;
-esac
-
-{ $as_echo "$as_me:$LINENO: checking dynamic linker characteristics" >&5
-$as_echo_n "checking dynamic linker characteristics... " >&6; }
-library_names_spec=
-libname_spec='lib$name'
-soname_spec=
-shrext_cmds=".so"
-postinstall_cmds=
-postuninstall_cmds=
-finish_cmds=
-finish_eval=
-shlibpath_var=
-shlibpath_overrides_runpath=unknown
-version_type=none
-dynamic_linker="$host_os ld.so"
-sys_lib_dlsearch_path_spec="/lib /usr/lib"
-
-if test "$GCC" = yes; then
- case $host_os in
- darwin*) lt_awk_arg="/^libraries:/,/LR/" ;;
- *) lt_awk_arg="/^libraries:/" ;;
- esac
- lt_search_path_spec=`$CC -print-search-dirs | awk $lt_awk_arg | $SED -e "s/^libraries://" -e "s,=/,/,g"`
- if echo "$lt_search_path_spec" | grep ';' >/dev/null ; then
- # if the path contains ";" then we assume it to be the separator
- # otherwise default to the standard path separator (i.e. ":") - it is
- # assumed that no part of a normal pathname contains ";" but that should
- # okay in the real world where ";" in dirpaths is itself problematic.
- lt_search_path_spec=`echo "$lt_search_path_spec" | $SED -e 's/;/ /g'`
- else
- lt_search_path_spec=`echo "$lt_search_path_spec" | $SED -e "s/$PATH_SEPARATOR/ /g"`
- fi
- # Ok, now we have the path, separated by spaces, we can step through it
- # and add multilib dir if necessary.
- lt_tmp_lt_search_path_spec=
- lt_multi_os_dir=`$CC $CPPFLAGS $CFLAGS $LDFLAGS -print-multi-os-directory 2>/dev/null`
- for lt_sys_path in $lt_search_path_spec; do
- if test -d "$lt_sys_path/$lt_multi_os_dir"; then
- lt_tmp_lt_search_path_spec="$lt_tmp_lt_search_path_spec $lt_sys_path/$lt_multi_os_dir"
- else
- test -d "$lt_sys_path" && \
- lt_tmp_lt_search_path_spec="$lt_tmp_lt_search_path_spec $lt_sys_path"
- fi
- done
- lt_search_path_spec=`echo $lt_tmp_lt_search_path_spec | awk '
-BEGIN {RS=" "; FS="/|\n";} {
- lt_foo="";
- lt_count=0;
- for (lt_i = NF; lt_i > 0; lt_i--) {
- if ($lt_i != "" && $lt_i != ".") {
- if ($lt_i == "..") {
- lt_count++;
- } else {
- if (lt_count == 0) {
- lt_foo="/" $lt_i lt_foo;
- } else {
- lt_count--;
- }
- }
- }
- }
- if (lt_foo != "") { lt_freq[lt_foo]++; }
- if (lt_freq[lt_foo] == 1) { print lt_foo; }
-}'`
- sys_lib_search_path_spec=`echo $lt_search_path_spec`
-else
- sys_lib_search_path_spec="/lib /usr/lib /usr/local/lib"
-fi
-need_lib_prefix=unknown
-hardcode_into_libs=no
-
-# when you set need_version to no, make sure it does not cause -set_version
-# flags to be left without arguments
-need_version=unknown
-
-case $host_os in
-aix3*)
- version_type=linux
- library_names_spec='${libname}${release}${shared_ext}$versuffix $libname.a'
- shlibpath_var=LIBPATH
-
- # AIX 3 has no versioning support, so we append a major version to the name.
- soname_spec='${libname}${release}${shared_ext}$major'
- ;;
-
-aix[4-9]*)
- version_type=linux
- need_lib_prefix=no
- need_version=no
- hardcode_into_libs=yes
- if test "$host_cpu" = ia64; then
- # AIX 5 supports IA64
- library_names_spec='${libname}${release}${shared_ext}$major ${libname}${release}${shared_ext}$versuffix $libname${shared_ext}'
- shlibpath_var=LD_LIBRARY_PATH
- else
- # With GCC up to 2.95.x, collect2 would create an import file
- # for dependence libraries. The import file would start with
- # the line `#! .'. This would cause the generated library to
- # depend on `.', always an invalid library. This was fixed in
- # development snapshots of GCC prior to 3.0.
- case $host_os in
- aix4 | aix4.[01] | aix4.[01].*)
- if { echo '#if __GNUC__ > 2 || (__GNUC__ == 2 && __GNUC_MINOR__ >= 97)'
- echo ' yes '
- echo '#endif'; } | ${CC} -E - | grep yes > /dev/null; then
- :
- else
- can_build_shared=no
- fi
- ;;
- esac
- # AIX (on Power*) has no versioning support, so currently we can not hardcode correct
- # soname into executable. Probably we can add versioning support to
- # collect2, so additional links can be useful in future.
- if test "$aix_use_runtimelinking" = yes; then
- # If using run time linking (on AIX 4.2 or later) use lib<name>.so
- # instead of lib<name>.a to let people know that these are not
- # typical AIX shared libraries.
- library_names_spec='${libname}${release}${shared_ext}$versuffix ${libname}${release}${shared_ext}$major $libname${shared_ext}'
- else
- # We preserve .a as extension for shared libraries through AIX4.2
- # and later when we are not doing run time linking.
- library_names_spec='${libname}${release}.a $libname.a'
- soname_spec='${libname}${release}${shared_ext}$major'
- fi
- shlibpath_var=LIBPATH
- fi
- ;;
-
-amigaos*)
- library_names_spec='$libname.ixlibrary $libname.a'
- # Create ${libname}_ixlibrary.a entries in /sys/libs.
- finish_eval='for lib in `ls $libdir/*.ixlibrary 2>/dev/null`; do libname=`$echo "X$lib" | $Xsed -e '\''s%^.*/\([^/]*\)\.ixlibrary$%\1%'\''`; test $rm /sys/libs/${libname}_ixlibrary.a; $show "cd /sys/libs && $LN_S $lib ${libname}_ixlibrary.a"; cd /sys/libs && $LN_S $lib ${libname}_ixlibrary.a || exit 1; done'
- ;;
-
-beos*)
- library_names_spec='${libname}${shared_ext}'
- dynamic_linker="$host_os ld.so"
- shlibpath_var=LIBRARY_PATH
- ;;
-
-bsdi[45]*)
- version_type=linux
- need_version=no
- library_names_spec='${libname}${release}${shared_ext}$versuffix ${libname}${release}${shared_ext}$major $libname${shared_ext}'
- soname_spec='${libname}${release}${shared_ext}$major'
- finish_cmds='PATH="\$PATH:/sbin" ldconfig $libdir'
- shlibpath_var=LD_LIBRARY_PATH
- sys_lib_search_path_spec="/shlib /usr/lib /usr/X11/lib /usr/contrib/lib /lib /usr/local/lib"
- sys_lib_dlsearch_path_spec="/shlib /usr/lib /usr/local/lib"
- # the default ld.so.conf also contains /usr/contrib/lib and
- # /usr/X11R6/lib (/usr/X11 is a link to /usr/X11R6), but let us allow
- # libtool to hard-code these into programs
- ;;
-
-cygwin* | mingw* | pw32*)
- version_type=windows
- shrext_cmds=".dll"
- need_version=no
- need_lib_prefix=no
-
- case $GCC,$host_os in
- yes,cygwin* | yes,mingw* | yes,pw32*)
- library_names_spec='$libname.dll.a'
- # DLL is installed to $(libdir)/../bin by postinstall_cmds
- postinstall_cmds='base_file=`basename \${file}`~
- dlpath=`$SHELL 2>&1 -c '\''. $dir/'\''\${base_file}'\''i;echo \$dlname'\''`~
- dldir=$destdir/`dirname \$dlpath`~
- test -d \$dldir || mkdir -p \$dldir~
- $install_prog $dir/$dlname \$dldir/$dlname~
- chmod a+x \$dldir/$dlname'
- postuninstall_cmds='dldll=`$SHELL 2>&1 -c '\''. $file; echo \$dlname'\''`~
- dlpath=$dir/\$dldll~
- $rm \$dlpath'
- shlibpath_overrides_runpath=yes
-
- case $host_os in
- cygwin*)
- # Cygwin DLLs use 'cyg' prefix rather than 'lib'
- soname_spec='`echo ${libname} | sed -e 's/^lib/cyg/'``echo ${release} | $SED -e 's/[.]/-/g'`${versuffix}${shared_ext}'
- sys_lib_search_path_spec="/usr/lib /lib/w32api /lib /usr/local/lib"
- ;;
- mingw*)
- # MinGW DLLs use traditional 'lib' prefix
- soname_spec='${libname}`echo ${release} | $SED -e 's/[.]/-/g'`${versuffix}${shared_ext}'
- sys_lib_search_path_spec=`$CC -print-search-dirs | grep "^libraries:" | $SED -e "s/^libraries://" -e "s,=/,/,g"`
- if echo "$sys_lib_search_path_spec" | grep ';[c-zC-Z]:/' >/dev/null; then
- # It is most probably a Windows format PATH printed by
- # mingw gcc, but we are running on Cygwin. Gcc prints its search
- # path with ; separators, and with drive letters. We can handle the
- # drive letters (cygwin fileutils understands them), so leave them,
- # especially as we might pass files found there to a mingw objdump,
- # which wouldn't understand a cygwinified path. Ahh.
- sys_lib_search_path_spec=`echo "$sys_lib_search_path_spec" | $SED -e 's/;/ /g'`
- else
- sys_lib_search_path_spec=`echo "$sys_lib_search_path_spec" | $SED -e "s/$PATH_SEPARATOR/ /g"`
- fi
- ;;
- pw32*)
- # pw32 DLLs use 'pw' prefix rather than 'lib'
- library_names_spec='`echo ${libname} | sed -e 's/^lib/pw/'``echo ${release} | $SED -e 's/[.]/-/g'`${versuffix}${shared_ext}'
- ;;
- esac
- ;;
-
- *)
- library_names_spec='${libname}`echo ${release} | $SED -e 's/[.]/-/g'`${versuffix}${shared_ext} $libname.lib'
- ;;
- esac
- dynamic_linker='Win32 ld.exe'
- # FIXME: first we should search . and the directory the executable is in
- shlibpath_var=PATH
- ;;
-
-darwin* | rhapsody*)
- dynamic_linker="$host_os dyld"
- version_type=darwin
- need_lib_prefix=no
- need_version=no
- library_names_spec='${libname}${release}${versuffix}$shared_ext ${libname}${release}${major}$shared_ext ${libname}$shared_ext'
- soname_spec='${libname}${release}${major}$shared_ext'
- shlibpath_overrides_runpath=yes
- shlibpath_var=DYLD_LIBRARY_PATH
- shrext_cmds='`test .$module = .yes && echo .so || echo .dylib`'
-
- sys_lib_search_path_spec="$sys_lib_search_path_spec /usr/local/lib"
- sys_lib_dlsearch_path_spec='/usr/local/lib /lib /usr/lib'
- ;;
-
-dgux*)
- version_type=linux
- need_lib_prefix=no
- need_version=no
- library_names_spec='${libname}${release}${shared_ext}$versuffix ${libname}${release}${shared_ext}$major $libname$shared_ext'
- soname_spec='${libname}${release}${shared_ext}$major'
- shlibpath_var=LD_LIBRARY_PATH
- ;;
-
-freebsd1*)
- dynamic_linker=no
- ;;
-
-freebsd* | dragonfly*)
- # DragonFly does not have aout. When/if they implement a new
- # versioning mechanism, adjust this.
- if test -x /usr/bin/objformat; then
- objformat=`/usr/bin/objformat`
- else
- case $host_os in
- freebsd[123]*) objformat=aout ;;
- *) objformat=elf ;;
- esac
- fi
- version_type=freebsd-$objformat
- case $version_type in
- freebsd-elf*)
- library_names_spec='${libname}${release}${shared_ext}$versuffix ${libname}${release}${shared_ext} $libname${shared_ext}'
- need_version=no
- need_lib_prefix=no
- ;;
- freebsd-*)
- library_names_spec='${libname}${release}${shared_ext}$versuffix $libname${shared_ext}$versuffix'
- need_version=yes
- ;;
- esac
- shlibpath_var=LD_LIBRARY_PATH
- case $host_os in
- freebsd2*)
- shlibpath_overrides_runpath=yes
- ;;
- freebsd3.[01]* | freebsdelf3.[01]*)
- shlibpath_overrides_runpath=yes
- hardcode_into_libs=yes
- ;;
- freebsd3.[2-9]* | freebsdelf3.[2-9]* | \
- freebsd4.[0-5] | freebsdelf4.[0-5] | freebsd4.1.1 | freebsdelf4.1.1)
- shlibpath_overrides_runpath=no
- hardcode_into_libs=yes
- ;;
- *) # from 4.6 on, and DragonFly
- shlibpath_overrides_runpath=yes
- hardcode_into_libs=yes
- ;;
- esac
- ;;
-
-gnu*)
- version_type=linux
- need_lib_prefix=no
- need_version=no
- library_names_spec='${libname}${release}${shared_ext}$versuffix ${libname}${release}${shared_ext}${major} ${libname}${shared_ext}'
- soname_spec='${libname}${release}${shared_ext}$major'
- shlibpath_var=LD_LIBRARY_PATH
- hardcode_into_libs=yes
- ;;
-
-hpux9* | hpux10* | hpux11*)
- # Give a soname corresponding to the major version so that dld.sl refuses to
- # link against other versions.
- version_type=sunos
- need_lib_prefix=no
- need_version=no
- case $host_cpu in
- ia64*)
- shrext_cmds='.so'
- hardcode_into_libs=yes
- dynamic_linker="$host_os dld.so"
- shlibpath_var=LD_LIBRARY_PATH
- shlibpath_overrides_runpath=yes # Unless +noenvvar is specified.
- library_names_spec='${libname}${release}${shared_ext}$versuffix ${libname}${release}${shared_ext}$major $libname${shared_ext}'
- soname_spec='${libname}${release}${shared_ext}$major'
- if test "X$HPUX_IA64_MODE" = X32; then
- sys_lib_search_path_spec="/usr/lib/hpux32 /usr/local/lib/hpux32 /usr/local/lib"
- else
- sys_lib_search_path_spec="/usr/lib/hpux64 /usr/local/lib/hpux64"
- fi
- sys_lib_dlsearch_path_spec=$sys_lib_search_path_spec
- ;;
- hppa*64*)
- shrext_cmds='.sl'
- hardcode_into_libs=yes
- dynamic_linker="$host_os dld.sl"
- shlibpath_var=LD_LIBRARY_PATH # How should we handle SHLIB_PATH
- shlibpath_overrides_runpath=yes # Unless +noenvvar is specified.
- library_names_spec='${libname}${release}${shared_ext}$versuffix ${libname}${release}${shared_ext}$major $libname${shared_ext}'
- soname_spec='${libname}${release}${shared_ext}$major'
- sys_lib_search_path_spec="/usr/lib/pa20_64 /usr/ccs/lib/pa20_64"
- sys_lib_dlsearch_path_spec=$sys_lib_search_path_spec
- ;;
- *)
- shrext_cmds='.sl'
- dynamic_linker="$host_os dld.sl"
- shlibpath_var=SHLIB_PATH
- shlibpath_overrides_runpath=no # +s is required to enable SHLIB_PATH
- library_names_spec='${libname}${release}${shared_ext}$versuffix ${libname}${release}${shared_ext}$major $libname${shared_ext}'
- soname_spec='${libname}${release}${shared_ext}$major'
- ;;
- esac
- # HP-UX runs *really* slowly unless shared libraries are mode 555.
- postinstall_cmds='chmod 555 $lib'
- ;;
-
-interix[3-9]*)
- version_type=linux
- need_lib_prefix=no
- need_version=no
- library_names_spec='${libname}${release}${shared_ext}$versuffix ${libname}${release}${shared_ext}$major ${libname}${shared_ext}'
- soname_spec='${libname}${release}${shared_ext}$major'
- dynamic_linker='Interix 3.x ld.so.1 (PE, like ELF)'
- shlibpath_var=LD_LIBRARY_PATH
- shlibpath_overrides_runpath=no
- hardcode_into_libs=yes
- ;;
-
-irix5* | irix6* | nonstopux*)
- case $host_os in
- nonstopux*) version_type=nonstopux ;;
- *)
- if test "$lt_cv_prog_gnu_ld" = yes; then
- version_type=linux
- else
- version_type=irix
- fi ;;
- esac
- need_lib_prefix=no
- need_version=no
- soname_spec='${libname}${release}${shared_ext}$major'
- library_names_spec='${libname}${release}${shared_ext}$versuffix ${libname}${release}${shared_ext}$major ${libname}${release}${shared_ext} $libname${shared_ext}'
- case $host_os in
- irix5* | nonstopux*)
- libsuff= shlibsuff=
- ;;
- *)
- case $LD in # libtool.m4 will add one of these switches to LD
- *-32|*"-32 "|*-melf32bsmip|*"-melf32bsmip ")
- libsuff= shlibsuff= libmagic=32-bit;;
- *-n32|*"-n32 "|*-melf32bmipn32|*"-melf32bmipn32 ")
- libsuff=32 shlibsuff=N32 libmagic=N32;;
- *-64|*"-64 "|*-melf64bmip|*"-melf64bmip ")
- libsuff=64 shlibsuff=64 libmagic=64-bit;;
- *) libsuff= shlibsuff= libmagic=never-match;;
- esac
- ;;
- esac
- shlibpath_var=LD_LIBRARY${shlibsuff}_PATH
- shlibpath_overrides_runpath=no
- sys_lib_search_path_spec="/usr/lib${libsuff} /lib${libsuff} /usr/local/lib${libsuff}"
- sys_lib_dlsearch_path_spec="/usr/lib${libsuff} /lib${libsuff}"
- hardcode_into_libs=yes
- ;;
-
-# No shared lib support for Linux oldld, aout, or coff.
-linux*oldld* | linux*aout* | linux*coff*)
- dynamic_linker=no
- ;;
-
-# This must be Linux ELF.
-linux* | k*bsd*-gnu)
- version_type=linux
- need_lib_prefix=no
- need_version=no
- library_names_spec='${libname}${release}${shared_ext}$versuffix ${libname}${release}${shared_ext}$major $libname${shared_ext}'
- soname_spec='${libname}${release}${shared_ext}$major'
- finish_cmds='PATH="\$PATH:/sbin" ldconfig -n $libdir'
- shlibpath_var=LD_LIBRARY_PATH
- shlibpath_overrides_runpath=no
- # This implies no fast_install, which is unacceptable.
- # Some rework will be needed to allow for fast_install
- # before this can be enabled.
- hardcode_into_libs=yes
-
- # Append ld.so.conf contents to the search path
- if test -f /etc/ld.so.conf; then
- lt_ld_extra=`awk '/^include / { system(sprintf("cd /etc; cat %s 2>/dev/null", \$2)); skip = 1; } { if (!skip) print \$0; skip = 0; }' < /etc/ld.so.conf | $SED -e 's/#.*//;/^[ ]*hwcap[ ]/d;s/[:, ]/ /g;s/=[^=]*$//;s/=[^= ]* / /g;/^$/d' | tr '\n' ' '`
- sys_lib_dlsearch_path_spec="/lib /usr/lib $lt_ld_extra"
- fi
-
- # We used to test for /lib/ld.so.1 and disable shared libraries on
- # powerpc, because MkLinux only supported shared libraries with the
- # GNU dynamic linker. Since this was broken with cross compilers,
- # most powerpc-linux boxes support dynamic linking these days and
- # people can always --disable-shared, the test was removed, and we
- # assume the GNU/Linux dynamic linker is in use.
- dynamic_linker='GNU/Linux ld.so'
- ;;
-
-netbsd*)
- version_type=sunos
- need_lib_prefix=no
- need_version=no
- if echo __ELF__ | $CC -E - | grep __ELF__ >/dev/null; then
- library_names_spec='${libname}${release}${shared_ext}$versuffix ${libname}${shared_ext}$versuffix'
- finish_cmds='PATH="\$PATH:/sbin" ldconfig -m $libdir'
- dynamic_linker='NetBSD (a.out) ld.so'
- else
- library_names_spec='${libname}${release}${shared_ext}$versuffix ${libname}${release}${shared_ext}$major ${libname}${shared_ext}'
- soname_spec='${libname}${release}${shared_ext}$major'
- dynamic_linker='NetBSD ld.elf_so'
- fi
- shlibpath_var=LD_LIBRARY_PATH
- shlibpath_overrides_runpath=yes
- hardcode_into_libs=yes
- ;;
-
-newsos6)
- version_type=linux
- library_names_spec='${libname}${release}${shared_ext}$versuffix ${libname}${release}${shared_ext}$major $libname${shared_ext}'
- shlibpath_var=LD_LIBRARY_PATH
- shlibpath_overrides_runpath=yes
- ;;
-
-nto-qnx*)
- version_type=linux
- need_lib_prefix=no
- need_version=no
- library_names_spec='${libname}${release}${shared_ext}$versuffix ${libname}${release}${shared_ext}$major $libname${shared_ext}'
- soname_spec='${libname}${release}${shared_ext}$major'
- shlibpath_var=LD_LIBRARY_PATH
- shlibpath_overrides_runpath=yes
- ;;
-
-openbsd*)
- version_type=sunos
- sys_lib_dlsearch_path_spec="/usr/lib"
- need_lib_prefix=no
- # Some older versions of OpenBSD (3.3 at least) *do* need versioned libs.
- case $host_os in
- openbsd3.3 | openbsd3.3.*) need_version=yes ;;
- *) need_version=no ;;
- esac
- library_names_spec='${libname}${release}${shared_ext}$versuffix ${libname}${shared_ext}$versuffix'
- finish_cmds='PATH="\$PATH:/sbin" ldconfig -m $libdir'
- shlibpath_var=LD_LIBRARY_PATH
- if test -z "`echo __ELF__ | $CC -E - | grep __ELF__`" || test "$host_os-$host_cpu" = "openbsd2.8-powerpc"; then
- case $host_os in
- openbsd2.[89] | openbsd2.[89].*)
- shlibpath_overrides_runpath=no
- ;;
- *)
- shlibpath_overrides_runpath=yes
- ;;
- esac
- else
- shlibpath_overrides_runpath=yes
- fi
- ;;
-
-os2*)
- libname_spec='$name'
- shrext_cmds=".dll"
- need_lib_prefix=no
- library_names_spec='$libname${shared_ext} $libname.a'
- dynamic_linker='OS/2 ld.exe'
- shlibpath_var=LIBPATH
- ;;
-
-osf3* | osf4* | osf5*)
- version_type=osf
- need_lib_prefix=no
- need_version=no
- soname_spec='${libname}${release}${shared_ext}$major'
- library_names_spec='${libname}${release}${shared_ext}$versuffix ${libname}${release}${shared_ext}$major $libname${shared_ext}'
- shlibpath_var=LD_LIBRARY_PATH
- sys_lib_search_path_spec="/usr/shlib /usr/ccs/lib /usr/lib/cmplrs/cc /usr/lib /usr/local/lib /var/shlib"
- sys_lib_dlsearch_path_spec="$sys_lib_search_path_spec"
- ;;
-
-rdos*)
- dynamic_linker=no
- ;;
-
-solaris*)
- version_type=linux
- need_lib_prefix=no
- need_version=no
- library_names_spec='${libname}${release}${shared_ext}$versuffix ${libname}${release}${shared_ext}$major $libname${shared_ext}'
- soname_spec='${libname}${release}${shared_ext}$major'
- shlibpath_var=LD_LIBRARY_PATH
- shlibpath_overrides_runpath=yes
- hardcode_into_libs=yes
- # ldd complains unless libraries are executable
- postinstall_cmds='chmod +x $lib'
- ;;
-
-sunos4*)
- version_type=sunos
- library_names_spec='${libname}${release}${shared_ext}$versuffix ${libname}${shared_ext}$versuffix'
- finish_cmds='PATH="\$PATH:/usr/etc" ldconfig $libdir'
- shlibpath_var=LD_LIBRARY_PATH
- shlibpath_overrides_runpath=yes
- if test "$with_gnu_ld" = yes; then
- need_lib_prefix=no
- fi
- need_version=yes
- ;;
-
-sysv4 | sysv4.3*)
- version_type=linux
- library_names_spec='${libname}${release}${shared_ext}$versuffix ${libname}${release}${shared_ext}$major $libname${shared_ext}'
- soname_spec='${libname}${release}${shared_ext}$major'
- shlibpath_var=LD_LIBRARY_PATH
- case $host_vendor in
- sni)
- shlibpath_overrides_runpath=no
- need_lib_prefix=no
- export_dynamic_flag_spec='${wl}-Blargedynsym'
- runpath_var=LD_RUN_PATH
- ;;
- siemens)
- need_lib_prefix=no
- ;;
- motorola)
- need_lib_prefix=no
- need_version=no
- shlibpath_overrides_runpath=no
- sys_lib_search_path_spec='/lib /usr/lib /usr/ccs/lib'
- ;;
- esac
- ;;
-
-sysv4*MP*)
- if test -d /usr/nec ;then
- version_type=linux
- library_names_spec='$libname${shared_ext}.$versuffix $libname${shared_ext}.$major $libname${shared_ext}'
- soname_spec='$libname${shared_ext}.$major'
- shlibpath_var=LD_LIBRARY_PATH
- fi
- ;;
-
-sysv5* | sco3.2v5* | sco5v6* | unixware* | OpenUNIX* | sysv4*uw2*)
- version_type=freebsd-elf
- need_lib_prefix=no
- need_version=no
- library_names_spec='${libname}${release}${shared_ext}$versuffix ${libname}${release}${shared_ext} $libname${shared_ext}'
- soname_spec='${libname}${release}${shared_ext}$major'
- shlibpath_var=LD_LIBRARY_PATH
- hardcode_into_libs=yes
- if test "$with_gnu_ld" = yes; then
- sys_lib_search_path_spec='/usr/local/lib /usr/gnu/lib /usr/ccs/lib /usr/lib /lib'
- shlibpath_overrides_runpath=no
- else
- sys_lib_search_path_spec='/usr/ccs/lib /usr/lib'
- shlibpath_overrides_runpath=yes
- case $host_os in
- sco3.2v5*)
- sys_lib_search_path_spec="$sys_lib_search_path_spec /lib"
- ;;
- esac
- fi
- sys_lib_dlsearch_path_spec='/usr/lib'
- ;;
-
-uts4*)
- version_type=linux
- library_names_spec='${libname}${release}${shared_ext}$versuffix ${libname}${release}${shared_ext}$major $libname${shared_ext}'
- soname_spec='${libname}${release}${shared_ext}$major'
- shlibpath_var=LD_LIBRARY_PATH
- ;;
-
-*)
- dynamic_linker=no
- ;;
-esac
-{ $as_echo "$as_me:$LINENO: result: $dynamic_linker" >&5
-$as_echo "$dynamic_linker" >&6; }
-test "$dynamic_linker" = no && can_build_shared=no
-
-if test "${lt_cv_sys_lib_search_path_spec+set}" = set; then
- $as_echo_n "(cached) " >&6
-else
- lt_cv_sys_lib_search_path_spec="$sys_lib_search_path_spec"
-fi
-
-sys_lib_search_path_spec="$lt_cv_sys_lib_search_path_spec"
-if test "${lt_cv_sys_lib_dlsearch_path_spec+set}" = set; then
- $as_echo_n "(cached) " >&6
-else
- lt_cv_sys_lib_dlsearch_path_spec="$sys_lib_dlsearch_path_spec"
-fi
-
-sys_lib_dlsearch_path_spec="$lt_cv_sys_lib_dlsearch_path_spec"
-
-variables_saved_for_relink="PATH $shlibpath_var $runpath_var"
-if test "$GCC" = yes; then
- variables_saved_for_relink="$variables_saved_for_relink GCC_EXEC_PREFIX COMPILER_PATH LIBRARY_PATH"
-fi
-
-{ $as_echo "$as_me:$LINENO: checking how to hardcode library paths into programs" >&5
-$as_echo_n "checking how to hardcode library paths into programs... " >&6; }
-hardcode_action=
-if test -n "$hardcode_libdir_flag_spec" || \
- test -n "$runpath_var" || \
- test "X$hardcode_automatic" = "Xyes" ; then
-
- # We can hardcode non-existant directories.
- if test "$hardcode_direct" != no &&
- # If the only mechanism to avoid hardcoding is shlibpath_var, we
- # have to relink, otherwise we might link with an installed library
- # when we should be linking with a yet-to-be-installed one
- ## test "$_LT_AC_TAGVAR(hardcode_shlibpath_var, )" != no &&
- test "$hardcode_minus_L" != no; then
- # Linking always hardcodes the temporary library directory.
- hardcode_action=relink
- else
- # We can link without hardcoding, and we can hardcode nonexisting dirs.
- hardcode_action=immediate
- fi
-else
- # We cannot hardcode anything, or else we can only hardcode existing
- # directories.
- hardcode_action=unsupported
-fi
-{ $as_echo "$as_me:$LINENO: result: $hardcode_action" >&5
-$as_echo "$hardcode_action" >&6; }
-
-if test "$hardcode_action" = relink; then
- # Fast installation is not supported
- enable_fast_install=no
-elif test "$shlibpath_overrides_runpath" = yes ||
- test "$enable_shared" = no; then
- # Fast installation is not necessary
- enable_fast_install=needless
-fi
-
-striplib=
-old_striplib=
-{ $as_echo "$as_me:$LINENO: checking whether stripping libraries is possible" >&5
-$as_echo_n "checking whether stripping libraries is possible... " >&6; }
-if test -n "$STRIP" && $STRIP -V 2>&1 | grep "GNU strip" >/dev/null; then
- test -z "$old_striplib" && old_striplib="$STRIP --strip-debug"
- test -z "$striplib" && striplib="$STRIP --strip-unneeded"
- { $as_echo "$as_me:$LINENO: result: yes" >&5
-$as_echo "yes" >&6; }
-else
-# FIXME - insert some real tests, host_os isn't really good enough
- case $host_os in
- darwin*)
- if test -n "$STRIP" ; then
- striplib="$STRIP -x"
- old_striplib="$STRIP -S"
- { $as_echo "$as_me:$LINENO: result: yes" >&5
-$as_echo "yes" >&6; }
- else
- { $as_echo "$as_me:$LINENO: result: no" >&5
-$as_echo "no" >&6; }
-fi
- ;;
- *)
- { $as_echo "$as_me:$LINENO: result: no" >&5
-$as_echo "no" >&6; }
- ;;
- esac
-fi
-
-if test "x$enable_dlopen" != xyes; then
- enable_dlopen=unknown
- enable_dlopen_self=unknown
- enable_dlopen_self_static=unknown
-else
- lt_cv_dlopen=no
- lt_cv_dlopen_libs=
-
- case $host_os in
- beos*)
- lt_cv_dlopen="load_add_on"
- lt_cv_dlopen_libs=
- lt_cv_dlopen_self=yes
- ;;
-
- mingw* | pw32*)
- lt_cv_dlopen="LoadLibrary"
- lt_cv_dlopen_libs=
- ;;
-
- cygwin*)
- lt_cv_dlopen="dlopen"
- lt_cv_dlopen_libs=
- ;;
-
- darwin*)
- # if libdl is installed we need to link against it
- { $as_echo "$as_me:$LINENO: checking for dlopen in -ldl" >&5
-$as_echo_n "checking for dlopen in -ldl... " >&6; }
-if test "${ac_cv_lib_dl_dlopen+set}" = set; then
- $as_echo_n "(cached) " >&6
-else
- ac_check_lib_save_LIBS=$LIBS
-LIBS="-ldl $LIBS"
-cat >conftest.$ac_ext <<_ACEOF
-/* confdefs.h. */
-_ACEOF
-cat confdefs.h >>conftest.$ac_ext
-cat >>conftest.$ac_ext <<_ACEOF
-/* end confdefs.h. */
-
-/* Override any GCC internal prototype to avoid an error.
- Use char because int might match the return type of a GCC
- builtin and then its argument prototype would still apply. */
-#ifdef __cplusplus
-extern "C"
-#endif
-char dlopen ();
-int
-main ()
-{
-return dlopen ();
- ;
- return 0;
-}
-_ACEOF
-rm -f conftest.$ac_objext conftest$ac_exeext
-if { (ac_try="$ac_link"
-case "(($ac_try" in
- *\"* | *\`* | *\\*) ac_try_echo=\$ac_try;;
- *) ac_try_echo=$ac_try;;
-esac
-eval ac_try_echo="\"\$as_me:$LINENO: $ac_try_echo\""
-$as_echo "$ac_try_echo") >&5
- (eval "$ac_link") 2>conftest.er1
- ac_status=$?
- grep -v '^ *+' conftest.er1 >conftest.err
- rm -f conftest.er1
- cat conftest.err >&5
- $as_echo "$as_me:$LINENO: \$? = $ac_status" >&5
- (exit $ac_status); } && {
- test -z "$ac_c_werror_flag" ||
- test ! -s conftest.err
- } && test -s conftest$ac_exeext && {
- test "$cross_compiling" = yes ||
- $as_test_x conftest$ac_exeext
- }; then
- ac_cv_lib_dl_dlopen=yes
-else
- $as_echo "$as_me: failed program was:" >&5
-sed 's/^/| /' conftest.$ac_ext >&5
-
- ac_cv_lib_dl_dlopen=no
-fi
-
-rm -rf conftest.dSYM
-rm -f core conftest.err conftest.$ac_objext conftest_ipa8_conftest.oo \
- conftest$ac_exeext conftest.$ac_ext
-LIBS=$ac_check_lib_save_LIBS
-fi
-{ $as_echo "$as_me:$LINENO: result: $ac_cv_lib_dl_dlopen" >&5
-$as_echo "$ac_cv_lib_dl_dlopen" >&6; }
-if test $ac_cv_lib_dl_dlopen = yes; then
- lt_cv_dlopen="dlopen" lt_cv_dlopen_libs="-ldl"
-else
-
- lt_cv_dlopen="dyld"
- lt_cv_dlopen_libs=
- lt_cv_dlopen_self=yes
-
-fi
-
- ;;
-
- *)
- { $as_echo "$as_me:$LINENO: checking for shl_load" >&5
-$as_echo_n "checking for shl_load... " >&6; }
-if test "${ac_cv_func_shl_load+set}" = set; then
- $as_echo_n "(cached) " >&6
-else
- cat >conftest.$ac_ext <<_ACEOF
-/* confdefs.h. */
-_ACEOF
-cat confdefs.h >>conftest.$ac_ext
-cat >>conftest.$ac_ext <<_ACEOF
-/* end confdefs.h. */
-/* Define shl_load to an innocuous variant, in case <limits.h> declares shl_load.
- For example, HP-UX 11i <limits.h> declares gettimeofday. */
-#define shl_load innocuous_shl_load
-
-/* System header to define __stub macros and hopefully few prototypes,
- which can conflict with char shl_load (); below.
- Prefer <limits.h> to <assert.h> if __STDC__ is defined, since
- <limits.h> exists even on freestanding compilers. */
-
-#ifdef __STDC__
-# include <limits.h>
-#else
-# include <assert.h>
-#endif
-
-#undef shl_load
-
-/* Override any GCC internal prototype to avoid an error.
- Use char because int might match the return type of a GCC
- builtin and then its argument prototype would still apply. */
-#ifdef __cplusplus
-extern "C"
-#endif
-char shl_load ();
-/* The GNU C library defines this for functions which it implements
- to always fail with ENOSYS. Some functions are actually named
- something starting with __ and the normal name is an alias. */
-#if defined __stub_shl_load || defined __stub___shl_load
-choke me
-#endif
-
-int
-main ()
-{
-return shl_load ();
- ;
- return 0;
-}
-_ACEOF
-rm -f conftest.$ac_objext conftest$ac_exeext
-if { (ac_try="$ac_link"
-case "(($ac_try" in
- *\"* | *\`* | *\\*) ac_try_echo=\$ac_try;;
- *) ac_try_echo=$ac_try;;
-esac
-eval ac_try_echo="\"\$as_me:$LINENO: $ac_try_echo\""
-$as_echo "$ac_try_echo") >&5
- (eval "$ac_link") 2>conftest.er1
- ac_status=$?
- grep -v '^ *+' conftest.er1 >conftest.err
- rm -f conftest.er1
- cat conftest.err >&5
- $as_echo "$as_me:$LINENO: \$? = $ac_status" >&5
- (exit $ac_status); } && {
- test -z "$ac_c_werror_flag" ||
- test ! -s conftest.err
- } && test -s conftest$ac_exeext && {
- test "$cross_compiling" = yes ||
- $as_test_x conftest$ac_exeext
- }; then
- ac_cv_func_shl_load=yes
-else
- $as_echo "$as_me: failed program was:" >&5
-sed 's/^/| /' conftest.$ac_ext >&5
-
- ac_cv_func_shl_load=no
-fi
-
-rm -rf conftest.dSYM
-rm -f core conftest.err conftest.$ac_objext conftest_ipa8_conftest.oo \
- conftest$ac_exeext conftest.$ac_ext
-fi
-{ $as_echo "$as_me:$LINENO: result: $ac_cv_func_shl_load" >&5
-$as_echo "$ac_cv_func_shl_load" >&6; }
-if test $ac_cv_func_shl_load = yes; then
- lt_cv_dlopen="shl_load"
-else
- { $as_echo "$as_me:$LINENO: checking for shl_load in -ldld" >&5
-$as_echo_n "checking for shl_load in -ldld... " >&6; }
-if test "${ac_cv_lib_dld_shl_load+set}" = set; then
- $as_echo_n "(cached) " >&6
-else
- ac_check_lib_save_LIBS=$LIBS
-LIBS="-ldld $LIBS"
-cat >conftest.$ac_ext <<_ACEOF
-/* confdefs.h. */
-_ACEOF
-cat confdefs.h >>conftest.$ac_ext
-cat >>conftest.$ac_ext <<_ACEOF
-/* end confdefs.h. */
-
-/* Override any GCC internal prototype to avoid an error.
- Use char because int might match the return type of a GCC
- builtin and then its argument prototype would still apply. */
-#ifdef __cplusplus
-extern "C"
-#endif
-char shl_load ();
-int
-main ()
-{
-return shl_load ();
- ;
- return 0;
-}
-_ACEOF
-rm -f conftest.$ac_objext conftest$ac_exeext
-if { (ac_try="$ac_link"
-case "(($ac_try" in
- *\"* | *\`* | *\\*) ac_try_echo=\$ac_try;;
- *) ac_try_echo=$ac_try;;
-esac
-eval ac_try_echo="\"\$as_me:$LINENO: $ac_try_echo\""
-$as_echo "$ac_try_echo") >&5
- (eval "$ac_link") 2>conftest.er1
- ac_status=$?
- grep -v '^ *+' conftest.er1 >conftest.err
- rm -f conftest.er1
- cat conftest.err >&5
- $as_echo "$as_me:$LINENO: \$? = $ac_status" >&5
- (exit $ac_status); } && {
- test -z "$ac_c_werror_flag" ||
- test ! -s conftest.err
- } && test -s conftest$ac_exeext && {
- test "$cross_compiling" = yes ||
- $as_test_x conftest$ac_exeext
- }; then
- ac_cv_lib_dld_shl_load=yes
-else
- $as_echo "$as_me: failed program was:" >&5
-sed 's/^/| /' conftest.$ac_ext >&5
-
- ac_cv_lib_dld_shl_load=no
-fi
-
-rm -rf conftest.dSYM
-rm -f core conftest.err conftest.$ac_objext conftest_ipa8_conftest.oo \
- conftest$ac_exeext conftest.$ac_ext
-LIBS=$ac_check_lib_save_LIBS
-fi
-{ $as_echo "$as_me:$LINENO: result: $ac_cv_lib_dld_shl_load" >&5
-$as_echo "$ac_cv_lib_dld_shl_load" >&6; }
-if test $ac_cv_lib_dld_shl_load = yes; then
- lt_cv_dlopen="shl_load" lt_cv_dlopen_libs="-ldld"
-else
- { $as_echo "$as_me:$LINENO: checking for dlopen" >&5
-$as_echo_n "checking for dlopen... " >&6; }
-if test "${ac_cv_func_dlopen+set}" = set; then
- $as_echo_n "(cached) " >&6
-else
- cat >conftest.$ac_ext <<_ACEOF
-/* confdefs.h. */
-_ACEOF
-cat confdefs.h >>conftest.$ac_ext
-cat >>conftest.$ac_ext <<_ACEOF
-/* end confdefs.h. */
-/* Define dlopen to an innocuous variant, in case <limits.h> declares dlopen.
- For example, HP-UX 11i <limits.h> declares gettimeofday. */
-#define dlopen innocuous_dlopen
-
-/* System header to define __stub macros and hopefully few prototypes,
- which can conflict with char dlopen (); below.
- Prefer <limits.h> to <assert.h> if __STDC__ is defined, since
- <limits.h> exists even on freestanding compilers. */
-
-#ifdef __STDC__
-# include <limits.h>
-#else
-# include <assert.h>
-#endif
-
-#undef dlopen
-
-/* Override any GCC internal prototype to avoid an error.
- Use char because int might match the return type of a GCC
- builtin and then its argument prototype would still apply. */
-#ifdef __cplusplus
-extern "C"
-#endif
-char dlopen ();
-/* The GNU C library defines this for functions which it implements
- to always fail with ENOSYS. Some functions are actually named
- something starting with __ and the normal name is an alias. */
-#if defined __stub_dlopen || defined __stub___dlopen
-choke me
-#endif
-
-int
-main ()
-{
-return dlopen ();
- ;
- return 0;
-}
-_ACEOF
-rm -f conftest.$ac_objext conftest$ac_exeext
-if { (ac_try="$ac_link"
-case "(($ac_try" in
- *\"* | *\`* | *\\*) ac_try_echo=\$ac_try;;
- *) ac_try_echo=$ac_try;;
-esac
-eval ac_try_echo="\"\$as_me:$LINENO: $ac_try_echo\""
-$as_echo "$ac_try_echo") >&5
- (eval "$ac_link") 2>conftest.er1
- ac_status=$?
- grep -v '^ *+' conftest.er1 >conftest.err
- rm -f conftest.er1
- cat conftest.err >&5
- $as_echo "$as_me:$LINENO: \$? = $ac_status" >&5
- (exit $ac_status); } && {
- test -z "$ac_c_werror_flag" ||
- test ! -s conftest.err
- } && test -s conftest$ac_exeext && {
- test "$cross_compiling" = yes ||
- $as_test_x conftest$ac_exeext
- }; then
- ac_cv_func_dlopen=yes
-else
- $as_echo "$as_me: failed program was:" >&5
-sed 's/^/| /' conftest.$ac_ext >&5
-
- ac_cv_func_dlopen=no
-fi
-
-rm -rf conftest.dSYM
-rm -f core conftest.err conftest.$ac_objext conftest_ipa8_conftest.oo \
- conftest$ac_exeext conftest.$ac_ext
-fi
-{ $as_echo "$as_me:$LINENO: result: $ac_cv_func_dlopen" >&5
-$as_echo "$ac_cv_func_dlopen" >&6; }
-if test $ac_cv_func_dlopen = yes; then
- lt_cv_dlopen="dlopen"
-else
- { $as_echo "$as_me:$LINENO: checking for dlopen in -ldl" >&5
-$as_echo_n "checking for dlopen in -ldl... " >&6; }
-if test "${ac_cv_lib_dl_dlopen+set}" = set; then
- $as_echo_n "(cached) " >&6
-else
- ac_check_lib_save_LIBS=$LIBS
-LIBS="-ldl $LIBS"
-cat >conftest.$ac_ext <<_ACEOF
-/* confdefs.h. */
-_ACEOF
-cat confdefs.h >>conftest.$ac_ext
-cat >>conftest.$ac_ext <<_ACEOF
-/* end confdefs.h. */
-
-/* Override any GCC internal prototype to avoid an error.
- Use char because int might match the return type of a GCC
- builtin and then its argument prototype would still apply. */
-#ifdef __cplusplus
-extern "C"
-#endif
-char dlopen ();
-int
-main ()
-{
-return dlopen ();
- ;
- return 0;
-}
-_ACEOF
-rm -f conftest.$ac_objext conftest$ac_exeext
-if { (ac_try="$ac_link"
-case "(($ac_try" in
- *\"* | *\`* | *\\*) ac_try_echo=\$ac_try;;
- *) ac_try_echo=$ac_try;;
-esac
-eval ac_try_echo="\"\$as_me:$LINENO: $ac_try_echo\""
-$as_echo "$ac_try_echo") >&5
- (eval "$ac_link") 2>conftest.er1
- ac_status=$?
- grep -v '^ *+' conftest.er1 >conftest.err
- rm -f conftest.er1
- cat conftest.err >&5
- $as_echo "$as_me:$LINENO: \$? = $ac_status" >&5
- (exit $ac_status); } && {
- test -z "$ac_c_werror_flag" ||
- test ! -s conftest.err
- } && test -s conftest$ac_exeext && {
- test "$cross_compiling" = yes ||
- $as_test_x conftest$ac_exeext
- }; then
- ac_cv_lib_dl_dlopen=yes
-else
- $as_echo "$as_me: failed program was:" >&5
-sed 's/^/| /' conftest.$ac_ext >&5
-
- ac_cv_lib_dl_dlopen=no
-fi
-
-rm -rf conftest.dSYM
-rm -f core conftest.err conftest.$ac_objext conftest_ipa8_conftest.oo \
- conftest$ac_exeext conftest.$ac_ext
-LIBS=$ac_check_lib_save_LIBS
-fi
-{ $as_echo "$as_me:$LINENO: result: $ac_cv_lib_dl_dlopen" >&5
-$as_echo "$ac_cv_lib_dl_dlopen" >&6; }
-if test $ac_cv_lib_dl_dlopen = yes; then
- lt_cv_dlopen="dlopen" lt_cv_dlopen_libs="-ldl"
-else
- { $as_echo "$as_me:$LINENO: checking for dlopen in -lsvld" >&5
-$as_echo_n "checking for dlopen in -lsvld... " >&6; }
-if test "${ac_cv_lib_svld_dlopen+set}" = set; then
- $as_echo_n "(cached) " >&6
-else
- ac_check_lib_save_LIBS=$LIBS
-LIBS="-lsvld $LIBS"
-cat >conftest.$ac_ext <<_ACEOF
-/* confdefs.h. */
-_ACEOF
-cat confdefs.h >>conftest.$ac_ext
-cat >>conftest.$ac_ext <<_ACEOF
-/* end confdefs.h. */
-
-/* Override any GCC internal prototype to avoid an error.
- Use char because int might match the return type of a GCC
- builtin and then its argument prototype would still apply. */
-#ifdef __cplusplus
-extern "C"
-#endif
-char dlopen ();
-int
-main ()
-{
-return dlopen ();
- ;
- return 0;
-}
-_ACEOF
-rm -f conftest.$ac_objext conftest$ac_exeext
-if { (ac_try="$ac_link"
-case "(($ac_try" in
- *\"* | *\`* | *\\*) ac_try_echo=\$ac_try;;
- *) ac_try_echo=$ac_try;;
-esac
-eval ac_try_echo="\"\$as_me:$LINENO: $ac_try_echo\""
-$as_echo "$ac_try_echo") >&5
- (eval "$ac_link") 2>conftest.er1
- ac_status=$?
- grep -v '^ *+' conftest.er1 >conftest.err
- rm -f conftest.er1
- cat conftest.err >&5
- $as_echo "$as_me:$LINENO: \$? = $ac_status" >&5
- (exit $ac_status); } && {
- test -z "$ac_c_werror_flag" ||
- test ! -s conftest.err
- } && test -s conftest$ac_exeext && {
- test "$cross_compiling" = yes ||
- $as_test_x conftest$ac_exeext
- }; then
- ac_cv_lib_svld_dlopen=yes
-else
- $as_echo "$as_me: failed program was:" >&5
-sed 's/^/| /' conftest.$ac_ext >&5
-
- ac_cv_lib_svld_dlopen=no
-fi
-
-rm -rf conftest.dSYM
-rm -f core conftest.err conftest.$ac_objext conftest_ipa8_conftest.oo \
- conftest$ac_exeext conftest.$ac_ext
-LIBS=$ac_check_lib_save_LIBS
-fi
-{ $as_echo "$as_me:$LINENO: result: $ac_cv_lib_svld_dlopen" >&5
-$as_echo "$ac_cv_lib_svld_dlopen" >&6; }
-if test $ac_cv_lib_svld_dlopen = yes; then
- lt_cv_dlopen="dlopen" lt_cv_dlopen_libs="-lsvld"
-else
- { $as_echo "$as_me:$LINENO: checking for dld_link in -ldld" >&5
-$as_echo_n "checking for dld_link in -ldld... " >&6; }
-if test "${ac_cv_lib_dld_dld_link+set}" = set; then
- $as_echo_n "(cached) " >&6
-else
- ac_check_lib_save_LIBS=$LIBS
-LIBS="-ldld $LIBS"
-cat >conftest.$ac_ext <<_ACEOF
-/* confdefs.h. */
-_ACEOF
-cat confdefs.h >>conftest.$ac_ext
-cat >>conftest.$ac_ext <<_ACEOF
-/* end confdefs.h. */
-
-/* Override any GCC internal prototype to avoid an error.
- Use char because int might match the return type of a GCC
- builtin and then its argument prototype would still apply. */
-#ifdef __cplusplus
-extern "C"
-#endif
-char dld_link ();
-int
-main ()
-{
-return dld_link ();
- ;
- return 0;
-}
-_ACEOF
-rm -f conftest.$ac_objext conftest$ac_exeext
-if { (ac_try="$ac_link"
-case "(($ac_try" in
- *\"* | *\`* | *\\*) ac_try_echo=\$ac_try;;
- *) ac_try_echo=$ac_try;;
-esac
-eval ac_try_echo="\"\$as_me:$LINENO: $ac_try_echo\""
-$as_echo "$ac_try_echo") >&5
- (eval "$ac_link") 2>conftest.er1
- ac_status=$?
- grep -v '^ *+' conftest.er1 >conftest.err
- rm -f conftest.er1
- cat conftest.err >&5
- $as_echo "$as_me:$LINENO: \$? = $ac_status" >&5
- (exit $ac_status); } && {
- test -z "$ac_c_werror_flag" ||
- test ! -s conftest.err
- } && test -s conftest$ac_exeext && {
- test "$cross_compiling" = yes ||
- $as_test_x conftest$ac_exeext
- }; then
- ac_cv_lib_dld_dld_link=yes
-else
- $as_echo "$as_me: failed program was:" >&5
-sed 's/^/| /' conftest.$ac_ext >&5
-
- ac_cv_lib_dld_dld_link=no
-fi
-
-rm -rf conftest.dSYM
-rm -f core conftest.err conftest.$ac_objext conftest_ipa8_conftest.oo \
- conftest$ac_exeext conftest.$ac_ext
-LIBS=$ac_check_lib_save_LIBS
-fi
-{ $as_echo "$as_me:$LINENO: result: $ac_cv_lib_dld_dld_link" >&5
-$as_echo "$ac_cv_lib_dld_dld_link" >&6; }
-if test $ac_cv_lib_dld_dld_link = yes; then
- lt_cv_dlopen="dld_link" lt_cv_dlopen_libs="-ldld"
-fi
-
-
-fi
-
-
-fi
-
-
-fi
-
-
-fi
-
-
-fi
-
- ;;
- esac
-
- if test "x$lt_cv_dlopen" != xno; then
- enable_dlopen=yes
- else
- enable_dlopen=no
- fi
-
- case $lt_cv_dlopen in
- dlopen)
- save_CPPFLAGS="$CPPFLAGS"
- test "x$ac_cv_header_dlfcn_h" = xyes && CPPFLAGS="$CPPFLAGS -DHAVE_DLFCN_H"
-
- save_LDFLAGS="$LDFLAGS"
- wl=$lt_prog_compiler_wl eval LDFLAGS=\"\$LDFLAGS $export_dynamic_flag_spec\"
-
- save_LIBS="$LIBS"
- LIBS="$lt_cv_dlopen_libs $LIBS"
-
- { $as_echo "$as_me:$LINENO: checking whether a program can dlopen itself" >&5
-$as_echo_n "checking whether a program can dlopen itself... " >&6; }
-if test "${lt_cv_dlopen_self+set}" = set; then
- $as_echo_n "(cached) " >&6
-else
- if test "$cross_compiling" = yes; then :
- lt_cv_dlopen_self=cross
-else
- lt_dlunknown=0; lt_dlno_uscore=1; lt_dlneed_uscore=2
- lt_status=$lt_dlunknown
- cat > conftest.$ac_ext <<EOF
-#line 12721 "configure"
-#include "confdefs.h"
-
-#if HAVE_DLFCN_H
-#include <dlfcn.h>
-#endif
-
-#include <stdio.h>
-
-#ifdef RTLD_GLOBAL
-# define LT_DLGLOBAL RTLD_GLOBAL
-#else
-# ifdef DL_GLOBAL
-# define LT_DLGLOBAL DL_GLOBAL
-# else
-# define LT_DLGLOBAL 0
-# endif
-#endif
-
-/* We may have to define LT_DLLAZY_OR_NOW in the command line if we
- find out it does not work in some platform. */
-#ifndef LT_DLLAZY_OR_NOW
-# ifdef RTLD_LAZY
-# define LT_DLLAZY_OR_NOW RTLD_LAZY
-# else
-# ifdef DL_LAZY
-# define LT_DLLAZY_OR_NOW DL_LAZY
-# else
-# ifdef RTLD_NOW
-# define LT_DLLAZY_OR_NOW RTLD_NOW
-# else
-# ifdef DL_NOW
-# define LT_DLLAZY_OR_NOW DL_NOW
-# else
-# define LT_DLLAZY_OR_NOW 0
-# endif
-# endif
-# endif
-# endif
-#endif
-
-#ifdef __cplusplus
-extern "C" void exit (int);
-#endif
-
-void fnord() { int i=42;}
-int main ()
-{
- void *self = dlopen (0, LT_DLGLOBAL|LT_DLLAZY_OR_NOW);
- int status = $lt_dlunknown;
-
- if (self)
- {
- if (dlsym (self,"fnord")) status = $lt_dlno_uscore;
- else if (dlsym( self,"_fnord")) status = $lt_dlneed_uscore;
- /* dlclose (self); */
- }
- else
- puts (dlerror ());
-
- exit (status);
-}
-EOF
- if { (eval echo "$as_me:$LINENO: \"$ac_link\"") >&5
- (eval $ac_link) 2>&5
- ac_status=$?
- $as_echo "$as_me:$LINENO: \$? = $ac_status" >&5
- (exit $ac_status); } && test -s conftest${ac_exeext} 2>/dev/null; then
- (./conftest; exit; ) >&5 2>/dev/null
- lt_status=$?
- case x$lt_status in
- x$lt_dlno_uscore) lt_cv_dlopen_self=yes ;;
- x$lt_dlneed_uscore) lt_cv_dlopen_self=yes ;;
- x$lt_dlunknown|x*) lt_cv_dlopen_self=no ;;
- esac
- else :
- # compilation failed
- lt_cv_dlopen_self=no
- fi
-fi
-rm -fr conftest*
-
-
-fi
-{ $as_echo "$as_me:$LINENO: result: $lt_cv_dlopen_self" >&5
-$as_echo "$lt_cv_dlopen_self" >&6; }
-
- if test "x$lt_cv_dlopen_self" = xyes; then
- wl=$lt_prog_compiler_wl eval LDFLAGS=\"\$LDFLAGS $lt_prog_compiler_static\"
- { $as_echo "$as_me:$LINENO: checking whether a statically linked program can dlopen itself" >&5
-$as_echo_n "checking whether a statically linked program can dlopen itself... " >&6; }
-if test "${lt_cv_dlopen_self_static+set}" = set; then
- $as_echo_n "(cached) " >&6
-else
- if test "$cross_compiling" = yes; then :
- lt_cv_dlopen_self_static=cross
-else
- lt_dlunknown=0; lt_dlno_uscore=1; lt_dlneed_uscore=2
- lt_status=$lt_dlunknown
- cat > conftest.$ac_ext <<EOF
-#line 12821 "configure"
-#include "confdefs.h"
-
-#if HAVE_DLFCN_H
-#include <dlfcn.h>
-#endif
-
-#include <stdio.h>
-
-#ifdef RTLD_GLOBAL
-# define LT_DLGLOBAL RTLD_GLOBAL
-#else
-# ifdef DL_GLOBAL
-# define LT_DLGLOBAL DL_GLOBAL
-# else
-# define LT_DLGLOBAL 0
-# endif
-#endif
-
-/* We may have to define LT_DLLAZY_OR_NOW in the command line if we
- find out it does not work in some platform. */
-#ifndef LT_DLLAZY_OR_NOW
-# ifdef RTLD_LAZY
-# define LT_DLLAZY_OR_NOW RTLD_LAZY
-# else
-# ifdef DL_LAZY
-# define LT_DLLAZY_OR_NOW DL_LAZY
-# else
-# ifdef RTLD_NOW
-# define LT_DLLAZY_OR_NOW RTLD_NOW
-# else
-# ifdef DL_NOW
-# define LT_DLLAZY_OR_NOW DL_NOW
-# else
-# define LT_DLLAZY_OR_NOW 0
-# endif
-# endif
-# endif
-# endif
-#endif
-
-#ifdef __cplusplus
-extern "C" void exit (int);
-#endif
-
-void fnord() { int i=42;}
-int main ()
-{
- void *self = dlopen (0, LT_DLGLOBAL|LT_DLLAZY_OR_NOW);
- int status = $lt_dlunknown;
-
- if (self)
- {
- if (dlsym (self,"fnord")) status = $lt_dlno_uscore;
- else if (dlsym( self,"_fnord")) status = $lt_dlneed_uscore;
- /* dlclose (self); */
- }
- else
- puts (dlerror ());
-
- exit (status);
-}
-EOF
- if { (eval echo "$as_me:$LINENO: \"$ac_link\"") >&5
- (eval $ac_link) 2>&5
- ac_status=$?
- $as_echo "$as_me:$LINENO: \$? = $ac_status" >&5
- (exit $ac_status); } && test -s conftest${ac_exeext} 2>/dev/null; then
- (./conftest; exit; ) >&5 2>/dev/null
- lt_status=$?
- case x$lt_status in
- x$lt_dlno_uscore) lt_cv_dlopen_self_static=yes ;;
- x$lt_dlneed_uscore) lt_cv_dlopen_self_static=yes ;;
- x$lt_dlunknown|x*) lt_cv_dlopen_self_static=no ;;
- esac
- else :
- # compilation failed
- lt_cv_dlopen_self_static=no
- fi
-fi
-rm -fr conftest*
-
-
-fi
-{ $as_echo "$as_me:$LINENO: result: $lt_cv_dlopen_self_static" >&5
-$as_echo "$lt_cv_dlopen_self_static" >&6; }
- fi
-
- CPPFLAGS="$save_CPPFLAGS"
- LDFLAGS="$save_LDFLAGS"
- LIBS="$save_LIBS"
- ;;
- esac
-
- case $lt_cv_dlopen_self in
- yes|no) enable_dlopen_self=$lt_cv_dlopen_self ;;
- *) enable_dlopen_self=unknown ;;
- esac
-
- case $lt_cv_dlopen_self_static in
- yes|no) enable_dlopen_self_static=$lt_cv_dlopen_self_static ;;
- *) enable_dlopen_self_static=unknown ;;
- esac
-fi
-
-
-# Report which library types will actually be built
-{ $as_echo "$as_me:$LINENO: checking if libtool supports shared libraries" >&5
-$as_echo_n "checking if libtool supports shared libraries... " >&6; }
-{ $as_echo "$as_me:$LINENO: result: $can_build_shared" >&5
-$as_echo "$can_build_shared" >&6; }
-
-{ $as_echo "$as_me:$LINENO: checking whether to build shared libraries" >&5
-$as_echo_n "checking whether to build shared libraries... " >&6; }
-test "$can_build_shared" = "no" && enable_shared=no
-
-# On AIX, shared libraries and static libraries use the same namespace, and
-# are all built from PIC.
-case $host_os in
-aix3*)
- test "$enable_shared" = yes && enable_static=no
- if test -n "$RANLIB"; then
- archive_cmds="$archive_cmds~\$RANLIB \$lib"
- postinstall_cmds='$RANLIB $lib'
- fi
- ;;
-
-aix[4-9]*)
- if test "$host_cpu" != ia64 && test "$aix_use_runtimelinking" = no ; then
- test "$enable_shared" = yes && enable_static=no
- fi
- ;;
-esac
-{ $as_echo "$as_me:$LINENO: result: $enable_shared" >&5
-$as_echo "$enable_shared" >&6; }
-
-{ $as_echo "$as_me:$LINENO: checking whether to build static libraries" >&5
-$as_echo_n "checking whether to build static libraries... " >&6; }
-# Make sure either enable_shared or enable_static is yes.
-test "$enable_shared" = yes || enable_static=yes
-{ $as_echo "$as_me:$LINENO: result: $enable_static" >&5
-$as_echo "$enable_static" >&6; }
-
-# The else clause should only fire when bootstrapping the
-# libtool distribution, otherwise you forgot to ship ltmain.sh
-# with your package, and you will get complaints that there are
-# no rules to generate ltmain.sh.
-if test -f "$ltmain"; then
- # See if we are running on zsh, and set the options which allow our commands through
- # without removal of \ escapes.
- if test -n "${ZSH_VERSION+set}" ; then
- setopt NO_GLOB_SUBST
- fi
- # Now quote all the things that may contain metacharacters while being
- # careful not to overquote the AC_SUBSTed values. We take copies of the
- # variables and quote the copies for generation of the libtool script.
- for var in echo old_CC old_CFLAGS AR AR_FLAGS EGREP RANLIB LN_S LTCC LTCFLAGS NM \
- SED SHELL STRIP \
- libname_spec library_names_spec soname_spec extract_expsyms_cmds \
- old_striplib striplib file_magic_cmd finish_cmds finish_eval \
- deplibs_check_method reload_flag reload_cmds need_locks \
- lt_cv_sys_global_symbol_pipe lt_cv_sys_global_symbol_to_cdecl \
- lt_cv_sys_global_symbol_to_c_name_address \
- sys_lib_search_path_spec sys_lib_dlsearch_path_spec \
- old_postinstall_cmds old_postuninstall_cmds \
- compiler \
- CC \
- LD \
- lt_prog_compiler_wl \
- lt_prog_compiler_pic \
- lt_prog_compiler_static \
- lt_prog_compiler_no_builtin_flag \
- export_dynamic_flag_spec \
- thread_safe_flag_spec \
- whole_archive_flag_spec \
- enable_shared_with_static_runtimes \
- old_archive_cmds \
- old_archive_from_new_cmds \
- predep_objects \
- postdep_objects \
- predeps \
- postdeps \
- compiler_lib_search_path \
- compiler_lib_search_dirs \
- archive_cmds \
- archive_expsym_cmds \
- postinstall_cmds \
- postuninstall_cmds \
- old_archive_from_expsyms_cmds \
- allow_undefined_flag \
- no_undefined_flag \
- export_symbols_cmds \
- hardcode_libdir_flag_spec \
- hardcode_libdir_flag_spec_ld \
- hardcode_libdir_separator \
- hardcode_automatic \
- module_cmds \
- module_expsym_cmds \
- lt_cv_prog_compiler_c_o \
- fix_srcfile_path \
- exclude_expsyms \
- include_expsyms; do
-
- case $var in
- old_archive_cmds | \
- old_archive_from_new_cmds | \
- archive_cmds | \
- archive_expsym_cmds | \
- module_cmds | \
- module_expsym_cmds | \
- old_archive_from_expsyms_cmds | \
- export_symbols_cmds | \
- extract_expsyms_cmds | reload_cmds | finish_cmds | \
- postinstall_cmds | postuninstall_cmds | \
- old_postinstall_cmds | old_postuninstall_cmds | \
- sys_lib_search_path_spec | sys_lib_dlsearch_path_spec)
- # Double-quote double-evaled strings.
- eval "lt_$var=\\\"\`\$echo \"X\$$var\" | \$Xsed -e \"\$double_quote_subst\" -e \"\$sed_quote_subst\" -e \"\$delay_variable_subst\"\`\\\""
- ;;
- *)
- eval "lt_$var=\\\"\`\$echo \"X\$$var\" | \$Xsed -e \"\$sed_quote_subst\"\`\\\""
- ;;
- esac
- done
-
- case $lt_echo in
- *'\$0 --fallback-echo"')
- lt_echo=`$echo "X$lt_echo" | $Xsed -e 's/\\\\\\\$0 --fallback-echo"$/$0 --fallback-echo"/'`
- ;;
- esac
-
-cfgfile="${ofile}T"
- trap "$rm \"$cfgfile\"; exit 1" 1 2 15
- $rm -f "$cfgfile"
- { $as_echo "$as_me:$LINENO: creating $ofile" >&5
-$as_echo "$as_me: creating $ofile" >&6;}
-
- cat <<__EOF__ >> "$cfgfile"
-#! $SHELL
-
-# `$echo "$cfgfile" | sed 's%^.*/%%'` - Provide generalized library-building support services.
-# Generated automatically by $PROGRAM (GNU $PACKAGE $VERSION$TIMESTAMP)
-# NOTE: Changes made to this file will be lost: look at ltmain.sh.
-#
-# Copyright (C) 1996, 1997, 1998, 1999, 2000, 2001, 2002, 2003, 2004, 2005, 2006, 2007, 2008
-# Free Software Foundation, Inc.
-#
-# This file is part of GNU Libtool:
-# Originally by Gordon Matzigkeit <gord@gnu.ai.mit.edu>, 1996
-#
-# This program is free software; you can redistribute it and/or modify
-# it under the terms of the GNU General Public License as published by
-# the Free Software Foundation; either version 2 of the License, or
-# (at your option) any later version.
-#
-# This program is distributed in the hope that it will be useful, but
-# WITHOUT ANY WARRANTY; without even the implied warranty of
-# MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the GNU
-# General Public License for more details.
-#
-# You should have received a copy of the GNU General Public License
-# along with this program; if not, write to the Free Software
-# Foundation, Inc., 51 Franklin Street, Fifth Floor, Boston, MA 02110-1301, USA.
-#
-# As a special exception to the GNU General Public License, if you
-# distribute this file as part of a program that contains a
-# configuration script generated by Autoconf, you may include it under
-# the same distribution terms that you use for the rest of that program.
-
-# A sed program that does not truncate output.
-SED=$lt_SED
-
-# Sed that helps us avoid accidentally triggering echo(1) options like -n.
-Xsed="$SED -e 1s/^X//"
-
-# The HP-UX ksh and POSIX shell print the target directory to stdout
-# if CDPATH is set.
-(unset CDPATH) >/dev/null 2>&1 && unset CDPATH
-
-# The names of the tagged configurations supported by this script.
-available_tags=
-
-# ### BEGIN LIBTOOL CONFIG
-
-# Libtool was configured on host `(hostname || uname -n) 2>/dev/null | sed 1q`:
-
-# Shell to use when invoking shell scripts.
-SHELL=$lt_SHELL
-
-# Whether or not to build shared libraries.
-build_libtool_libs=$enable_shared
-
-# Whether or not to build static libraries.
-build_old_libs=$enable_static
-
-# Whether or not to add -lc for building shared libraries.
-build_libtool_need_lc=$archive_cmds_need_lc
-
-# Whether or not to disallow shared libs when runtime libs are static
-allow_libtool_libs_with_static_runtimes=$enable_shared_with_static_runtimes
-
-# Whether or not to optimize for fast installation.
-fast_install=$enable_fast_install
-
-# The host system.
-host_alias=$host_alias
-host=$host
-host_os=$host_os
-
-# The build system.
-build_alias=$build_alias
-build=$build
-build_os=$build_os
-
-# An echo program that does not interpret backslashes.
-echo=$lt_echo
-
-# The archiver.
-AR=$lt_AR
-AR_FLAGS=$lt_AR_FLAGS
-
-# A C compiler.
-LTCC=$lt_LTCC
-
-# LTCC compiler flags.
-LTCFLAGS=$lt_LTCFLAGS
-
-# A language-specific compiler.
-CC=$lt_compiler
-
-# Is the compiler the GNU C compiler?
-with_gcc=$GCC
-
-# An ERE matcher.
-EGREP=$lt_EGREP
-
-# The linker used to build libraries.
-LD=$lt_LD
-
-# Whether we need hard or soft links.
-LN_S=$lt_LN_S
-
-# A BSD-compatible nm program.
-NM=$lt_NM
-
-# A symbol stripping program
-STRIP=$lt_STRIP
-
-# Used to examine libraries when file_magic_cmd begins "file"
-MAGIC_CMD=$MAGIC_CMD
-
-# Used on cygwin: DLL creation program.
-DLLTOOL="$DLLTOOL"
-
-# Used on cygwin: object dumper.
-OBJDUMP="$OBJDUMP"
-
-# Used on cygwin: assembler.
-AS="$AS"
-
-# The name of the directory that contains temporary libtool files.
-objdir=$objdir
-
-# How to create reloadable object files.
-reload_flag=$lt_reload_flag
-reload_cmds=$lt_reload_cmds
-
-# How to pass a linker flag through the compiler.
-wl=$lt_lt_prog_compiler_wl
-
-# Object file suffix (normally "o").
-objext="$ac_objext"
-
-# Old archive suffix (normally "a").
-libext="$libext"
-
-# Shared library suffix (normally ".so").
-shrext_cmds='$shrext_cmds'
-
-# Executable file suffix (normally "").
-exeext="$exeext"
-
-# Additional compiler flags for building library objects.
-pic_flag=$lt_lt_prog_compiler_pic
-pic_mode=$pic_mode
-
-# What is the maximum length of a command?
-max_cmd_len=$lt_cv_sys_max_cmd_len
-
-# Does compiler simultaneously support -c and -o options?
-compiler_c_o=$lt_lt_cv_prog_compiler_c_o
-
-# Must we lock files when doing compilation?
-need_locks=$lt_need_locks
-
-# Do we need the lib prefix for modules?
-need_lib_prefix=$need_lib_prefix
-
-# Do we need a version for libraries?
-need_version=$need_version
-
-# Whether dlopen is supported.
-dlopen_support=$enable_dlopen
-
-# Whether dlopen of programs is supported.
-dlopen_self=$enable_dlopen_self
-
-# Whether dlopen of statically linked programs is supported.
-dlopen_self_static=$enable_dlopen_self_static
-
-# Compiler flag to prevent dynamic linking.
-link_static_flag=$lt_lt_prog_compiler_static
-
-# Compiler flag to turn off builtin functions.
-no_builtin_flag=$lt_lt_prog_compiler_no_builtin_flag
-
-# Compiler flag to allow reflexive dlopens.
-export_dynamic_flag_spec=$lt_export_dynamic_flag_spec
-
-# Compiler flag to generate shared objects directly from archives.
-whole_archive_flag_spec=$lt_whole_archive_flag_spec
-
-# Compiler flag to generate thread-safe objects.
-thread_safe_flag_spec=$lt_thread_safe_flag_spec
-
-# Library versioning type.
-version_type=$version_type
-
-# Format of library name prefix.
-libname_spec=$lt_libname_spec
-
-# List of archive names. First name is the real one, the rest are links.
-# The last name is the one that the linker finds with -lNAME.
-library_names_spec=$lt_library_names_spec
-
-# The coded name of the library, if different from the real name.
-soname_spec=$lt_soname_spec
-
-# Commands used to build and install an old-style archive.
-RANLIB=$lt_RANLIB
-old_archive_cmds=$lt_old_archive_cmds
-old_postinstall_cmds=$lt_old_postinstall_cmds
-old_postuninstall_cmds=$lt_old_postuninstall_cmds
-
-# Create an old-style archive from a shared archive.
-old_archive_from_new_cmds=$lt_old_archive_from_new_cmds
-
-# Create a temporary old-style archive to link instead of a shared archive.
-old_archive_from_expsyms_cmds=$lt_old_archive_from_expsyms_cmds
-
-# Commands used to build and install a shared archive.
-archive_cmds=$lt_archive_cmds
-archive_expsym_cmds=$lt_archive_expsym_cmds
-postinstall_cmds=$lt_postinstall_cmds
-postuninstall_cmds=$lt_postuninstall_cmds
-
-# Commands used to build a loadable module (assumed same as above if empty)
-module_cmds=$lt_module_cmds
-module_expsym_cmds=$lt_module_expsym_cmds
-
-# Commands to strip libraries.
-old_striplib=$lt_old_striplib
-striplib=$lt_striplib
-
-# Dependencies to place before the objects being linked to create a
-# shared library.
-predep_objects=$lt_predep_objects
-
-# Dependencies to place after the objects being linked to create a
-# shared library.
-postdep_objects=$lt_postdep_objects
-
-# Dependencies to place before the objects being linked to create a
-# shared library.
-predeps=$lt_predeps
-
-# Dependencies to place after the objects being linked to create a
-# shared library.
-postdeps=$lt_postdeps
-
-# The directories searched by this compiler when creating a shared
-# library
-compiler_lib_search_dirs=$lt_compiler_lib_search_dirs
-
-# The library search path used internally by the compiler when linking
-# a shared library.
-compiler_lib_search_path=$lt_compiler_lib_search_path
-
-# Method to check whether dependent libraries are shared objects.
-deplibs_check_method=$lt_deplibs_check_method
-
-# Command to use when deplibs_check_method == file_magic.
-file_magic_cmd=$lt_file_magic_cmd
-
-# Flag that allows shared libraries with undefined symbols to be built.
-allow_undefined_flag=$lt_allow_undefined_flag
-
-# Flag that forces no undefined symbols.
-no_undefined_flag=$lt_no_undefined_flag
-
-# Commands used to finish a libtool library installation in a directory.
-finish_cmds=$lt_finish_cmds
-
-# Same as above, but a single script fragment to be evaled but not shown.
-finish_eval=$lt_finish_eval
-
-# Take the output of nm and produce a listing of raw symbols and C names.
-global_symbol_pipe=$lt_lt_cv_sys_global_symbol_pipe
-
-# Transform the output of nm in a proper C declaration
-global_symbol_to_cdecl=$lt_lt_cv_sys_global_symbol_to_cdecl
-
-# Transform the output of nm in a C name address pair
-global_symbol_to_c_name_address=$lt_lt_cv_sys_global_symbol_to_c_name_address
-
-# This is the shared library runtime path variable.
-runpath_var=$runpath_var
-
-# This is the shared library path variable.
-shlibpath_var=$shlibpath_var
-
-# Is shlibpath searched before the hard-coded library search path?
-shlibpath_overrides_runpath=$shlibpath_overrides_runpath
-
-# How to hardcode a shared library path into an executable.
-hardcode_action=$hardcode_action
-
-# Whether we should hardcode library paths into libraries.
-hardcode_into_libs=$hardcode_into_libs
-
-# Flag to hardcode \$libdir into a binary during linking.
-# This must work even if \$libdir does not exist.
-hardcode_libdir_flag_spec=$lt_hardcode_libdir_flag_spec
-
-# If ld is used when linking, flag to hardcode \$libdir into
-# a binary during linking. This must work even if \$libdir does
-# not exist.
-hardcode_libdir_flag_spec_ld=$lt_hardcode_libdir_flag_spec_ld
-
-# Whether we need a single -rpath flag with a separated argument.
-hardcode_libdir_separator=$lt_hardcode_libdir_separator
-
-# Set to yes if using DIR/libNAME${shared_ext} during linking hardcodes DIR into the
-# resulting binary.
-hardcode_direct=$hardcode_direct
-
-# Set to yes if using the -LDIR flag during linking hardcodes DIR into the
-# resulting binary.
-hardcode_minus_L=$hardcode_minus_L
-
-# Set to yes if using SHLIBPATH_VAR=DIR during linking hardcodes DIR into
-# the resulting binary.
-hardcode_shlibpath_var=$hardcode_shlibpath_var
-
-# Set to yes if building a shared library automatically hardcodes DIR into the library
-# and all subsequent libraries and executables linked against it.
-hardcode_automatic=$hardcode_automatic
-
-# Variables whose values should be saved in libtool wrapper scripts and
-# restored at relink time.
-variables_saved_for_relink="$variables_saved_for_relink"
-
-# Whether libtool must link a program against all its dependency libraries.
-link_all_deplibs=$link_all_deplibs
-
-# Compile-time system search path for libraries
-sys_lib_search_path_spec=$lt_sys_lib_search_path_spec
-
-# Run-time system search path for libraries
-sys_lib_dlsearch_path_spec=$lt_sys_lib_dlsearch_path_spec
-
-# Fix the shell variable \$srcfile for the compiler.
-fix_srcfile_path=$lt_fix_srcfile_path
-
-# Set to yes if exported symbols are required.
-always_export_symbols=$always_export_symbols
-
-# The commands to list exported symbols.
-export_symbols_cmds=$lt_export_symbols_cmds
-
-# The commands to extract the exported symbol list from a shared archive.
-extract_expsyms_cmds=$lt_extract_expsyms_cmds
-
-# Symbols that should not be listed in the preloaded symbols.
-exclude_expsyms=$lt_exclude_expsyms
-
-# Symbols that must always be exported.
-include_expsyms=$lt_include_expsyms
-
-# ### END LIBTOOL CONFIG
-
-__EOF__
-
-
- case $host_os in
- aix3*)
- cat <<\EOF >> "$cfgfile"
-
-# AIX sometimes has problems with the GCC collect2 program. For some
-# reason, if we set the COLLECT_NAMES environment variable, the problems
-# vanish in a puff of smoke.
-if test "X${COLLECT_NAMES+set}" != Xset; then
- COLLECT_NAMES=
- export COLLECT_NAMES
-fi
-EOF
- ;;
- esac
-
- # We use sed instead of cat because bash on DJGPP gets confused if
- # if finds mixed CR/LF and LF-only lines. Since sed operates in
- # text mode, it properly converts lines to CR/LF. This bash problem
- # is reportedly fixed, but why not run on old versions too?
- sed '$q' "$ltmain" >> "$cfgfile" || (rm -f "$cfgfile"; exit 1)
-
- mv -f "$cfgfile" "$ofile" || \
- (rm -f "$ofile" && cp "$cfgfile" "$ofile" && rm -f "$cfgfile")
- chmod +x "$ofile"
-
-else
- # If there is no Makefile yet, we rely on a make rule to execute
- # `config.status --recheck' to rerun these tests and create the
- # libtool script then.
- ltmain_in=`echo $ltmain | sed -e 's/\.sh$/.in/'`
- if test -f "$ltmain_in"; then
- test -f Makefile && make "$ltmain"
- fi
-fi
-
-
-ac_ext=c
-ac_cpp='$CPP $CPPFLAGS'
-ac_compile='$CC -c $CFLAGS $CPPFLAGS conftest.$ac_ext >&5'
-ac_link='$CC -o conftest$ac_exeext $CFLAGS $CPPFLAGS $LDFLAGS conftest.$ac_ext $LIBS >&5'
-ac_compiler_gnu=$ac_cv_c_compiler_gnu
-
-CC="$lt_save_CC"
-
-
-# Check whether --with-tags was given.
-if test "${with_tags+set}" = set; then
- withval=$with_tags; tagnames="$withval"
-fi
-
-
-if test -f "$ltmain" && test -n "$tagnames"; then
- if test ! -f "${ofile}"; then
- { $as_echo "$as_me:$LINENO: WARNING: output file \`$ofile' does not exist" >&5
-$as_echo "$as_me: WARNING: output file \`$ofile' does not exist" >&2;}
- fi
-
- if test -z "$LTCC"; then
- eval "`$SHELL ${ofile} --config | grep '^LTCC='`"
- if test -z "$LTCC"; then
- { $as_echo "$as_me:$LINENO: WARNING: output file \`$ofile' does not look like a libtool script" >&5
-$as_echo "$as_me: WARNING: output file \`$ofile' does not look like a libtool script" >&2;}
- else
- { $as_echo "$as_me:$LINENO: WARNING: using \`LTCC=$LTCC', extracted from \`$ofile'" >&5
-$as_echo "$as_me: WARNING: using \`LTCC=$LTCC', extracted from \`$ofile'" >&2;}
- fi
- fi
- if test -z "$LTCFLAGS"; then
- eval "`$SHELL ${ofile} --config | grep '^LTCFLAGS='`"
- fi
-
- # Extract list of available tagged configurations in $ofile.
- # Note that this assumes the entire list is on one line.
- available_tags=`grep "^available_tags=" "${ofile}" | $SED -e 's/available_tags=\(.*$\)/\1/' -e 's/\"//g'`
-
- lt_save_ifs="$IFS"; IFS="${IFS}$PATH_SEPARATOR,"
- for tagname in $tagnames; do
- IFS="$lt_save_ifs"
- # Check whether tagname contains only valid characters
- case `$echo "X$tagname" | $Xsed -e 's:[-_ABCDEFGHIJKLMNOPQRSTUVWXYZabcdefghijklmnopqrstuvwxyz1234567890,/]::g'` in
- "") ;;
- *) { { $as_echo "$as_me:$LINENO: error: invalid tag name: $tagname" >&5
-$as_echo "$as_me: error: invalid tag name: $tagname" >&2;}
- { (exit 1); exit 1; }; }
- ;;
- esac
-
- if grep "^# ### BEGIN LIBTOOL TAG CONFIG: $tagname$" < "${ofile}" > /dev/null
- then
- { { $as_echo "$as_me:$LINENO: error: tag name \"$tagname\" already exists" >&5
-$as_echo "$as_me: error: tag name \"$tagname\" already exists" >&2;}
- { (exit 1); exit 1; }; }
- fi
-
- # Update the list of available tags.
- if test -n "$tagname"; then
- echo appending configuration tag \"$tagname\" to $ofile
-
- case $tagname in
- CXX)
- if test -n "$CXX" && ( test "X$CXX" != "Xno" &&
- ( (test "X$CXX" = "Xg++" && `g++ -v >/dev/null 2>&1` ) ||
- (test "X$CXX" != "Xg++"))) ; then
- ac_ext=cpp
-ac_cpp='$CXXCPP $CPPFLAGS'
-ac_compile='$CXX -c $CXXFLAGS $CPPFLAGS conftest.$ac_ext >&5'
-ac_link='$CXX -o conftest$ac_exeext $CXXFLAGS $CPPFLAGS $LDFLAGS conftest.$ac_ext $LIBS >&5'
-ac_compiler_gnu=$ac_cv_cxx_compiler_gnu
-
-
-
-
-archive_cmds_need_lc_CXX=no
-allow_undefined_flag_CXX=
-always_export_symbols_CXX=no
-archive_expsym_cmds_CXX=
-export_dynamic_flag_spec_CXX=
-hardcode_direct_CXX=no
-hardcode_libdir_flag_spec_CXX=
-hardcode_libdir_flag_spec_ld_CXX=
-hardcode_libdir_separator_CXX=
-hardcode_minus_L_CXX=no
-hardcode_shlibpath_var_CXX=unsupported
-hardcode_automatic_CXX=no
-module_cmds_CXX=
-module_expsym_cmds_CXX=
-link_all_deplibs_CXX=unknown
-old_archive_cmds_CXX=$old_archive_cmds
-no_undefined_flag_CXX=
-whole_archive_flag_spec_CXX=
-enable_shared_with_static_runtimes_CXX=no
-
-# Dependencies to place before and after the object being linked:
-predep_objects_CXX=
-postdep_objects_CXX=
-predeps_CXX=
-postdeps_CXX=
-compiler_lib_search_path_CXX=
-compiler_lib_search_dirs_CXX=
-
-# Source file extension for C++ test sources.
-ac_ext=cpp
-
-# Object file extension for compiled C++ test sources.
-objext=o
-objext_CXX=$objext
-
-# Code to be used in simple compile tests
-lt_simple_compile_test_code="int some_variable = 0;"
-
-# Code to be used in simple link tests
-lt_simple_link_test_code='int main(int, char *[]) { return(0); }'
-
-# ltmain only uses $CC for tagged configurations so make sure $CC is set.
-
-# If no C compiler was specified, use CC.
-LTCC=${LTCC-"$CC"}
-
-# If no C compiler flags were specified, use CFLAGS.
-LTCFLAGS=${LTCFLAGS-"$CFLAGS"}
-
-# Allow CC to be a program name with arguments.
-compiler=$CC
-
-
-# save warnings/boilerplate of simple test code
-ac_outfile=conftest.$ac_objext
-echo "$lt_simple_compile_test_code" >conftest.$ac_ext
-eval "$ac_compile" 2>&1 >/dev/null | $SED '/^$/d; /^ *+/d' >conftest.err
-_lt_compiler_boilerplate=`cat conftest.err`
-$rm conftest*
-
-ac_outfile=conftest.$ac_objext
-echo "$lt_simple_link_test_code" >conftest.$ac_ext
-eval "$ac_link" 2>&1 >/dev/null | $SED '/^$/d; /^ *+/d' >conftest.err
-_lt_linker_boilerplate=`cat conftest.err`
-$rm -r conftest*
-
-
-# Allow CC to be a program name with arguments.
-lt_save_CC=$CC
-lt_save_LD=$LD
-lt_save_GCC=$GCC
-GCC=$GXX
-lt_save_with_gnu_ld=$with_gnu_ld
-lt_save_path_LD=$lt_cv_path_LD
-if test -n "${lt_cv_prog_gnu_ldcxx+set}"; then
- lt_cv_prog_gnu_ld=$lt_cv_prog_gnu_ldcxx
-else
- $as_unset lt_cv_prog_gnu_ld
-fi
-if test -n "${lt_cv_path_LDCXX+set}"; then
- lt_cv_path_LD=$lt_cv_path_LDCXX
-else
- $as_unset lt_cv_path_LD
-fi
-test -z "${LDCXX+set}" || LD=$LDCXX
-CC=${CXX-"c++"}
-compiler=$CC
-compiler_CXX=$CC
-for cc_temp in $compiler""; do
- case $cc_temp in
- compile | *[\\/]compile | ccache | *[\\/]ccache ) ;;
- distcc | *[\\/]distcc | purify | *[\\/]purify ) ;;
- \-*) ;;
- *) break;;
- esac
-done
-cc_basename=`$echo "X$cc_temp" | $Xsed -e 's%.*/%%' -e "s%^$host_alias-%%"`
-
-
-# We don't want -fno-exception wen compiling C++ code, so set the
-# no_builtin_flag separately
-if test "$GXX" = yes; then
- lt_prog_compiler_no_builtin_flag_CXX=' -fno-builtin'
-else
- lt_prog_compiler_no_builtin_flag_CXX=
-fi
-
-if test "$GXX" = yes; then
- # Set up default GNU C++ configuration
-
-
-# Check whether --with-gnu-ld was given.
-if test "${with_gnu_ld+set}" = set; then
- withval=$with_gnu_ld; test "$withval" = no || with_gnu_ld=yes
-else
- with_gnu_ld=no
-fi
-
-ac_prog=ld
-if test "$GCC" = yes; then
- # Check if gcc -print-prog-name=ld gives a path.
- { $as_echo "$as_me:$LINENO: checking for ld used by $CC" >&5
-$as_echo_n "checking for ld used by $CC... " >&6; }
- case $host in
- *-*-mingw*)
- # gcc leaves a trailing carriage return which upsets mingw
- ac_prog=`($CC -print-prog-name=ld) 2>&5 | tr -d '\015'` ;;
- *)
- ac_prog=`($CC -print-prog-name=ld) 2>&5` ;;
- esac
- case $ac_prog in
- # Accept absolute paths.
- [\\/]* | ?:[\\/]*)
- re_direlt='/[^/][^/]*/\.\./'
- # Canonicalize the pathname of ld
- ac_prog=`echo $ac_prog| $SED 's%\\\\%/%g'`
- while echo $ac_prog | grep "$re_direlt" > /dev/null 2>&1; do
- ac_prog=`echo $ac_prog| $SED "s%$re_direlt%/%"`
- done
- test -z "$LD" && LD="$ac_prog"
- ;;
- "")
- # If it fails, then pretend we aren't using GCC.
- ac_prog=ld
- ;;
- *)
- # If it is relative, then search for the first ld in PATH.
- with_gnu_ld=unknown
- ;;
- esac
-elif test "$with_gnu_ld" = yes; then
- { $as_echo "$as_me:$LINENO: checking for GNU ld" >&5
-$as_echo_n "checking for GNU ld... " >&6; }
-else
- { $as_echo "$as_me:$LINENO: checking for non-GNU ld" >&5
-$as_echo_n "checking for non-GNU ld... " >&6; }
-fi
-if test "${lt_cv_path_LD+set}" = set; then
- $as_echo_n "(cached) " >&6
-else
- if test -z "$LD"; then
- lt_save_ifs="$IFS"; IFS=$PATH_SEPARATOR
- for ac_dir in $PATH; do
- IFS="$lt_save_ifs"
- test -z "$ac_dir" && ac_dir=.
- if test -f "$ac_dir/$ac_prog" || test -f "$ac_dir/$ac_prog$ac_exeext"; then
- lt_cv_path_LD="$ac_dir/$ac_prog"
- # Check to see if the program is GNU ld. I'd rather use --version,
- # but apparently some variants of GNU ld only accept -v.
- # Break only if it was the GNU/non-GNU ld that we prefer.
- case `"$lt_cv_path_LD" -v 2>&1 </dev/null` in
- *GNU* | *'with BFD'*)
- test "$with_gnu_ld" != no && break
- ;;
- *)
- test "$with_gnu_ld" != yes && break
- ;;
- esac
- fi
- done
- IFS="$lt_save_ifs"
-else
- lt_cv_path_LD="$LD" # Let the user override the test with a path.
-fi
-fi
-
-LD="$lt_cv_path_LD"
-if test -n "$LD"; then
- { $as_echo "$as_me:$LINENO: result: $LD" >&5
-$as_echo "$LD" >&6; }
-else
- { $as_echo "$as_me:$LINENO: result: no" >&5
-$as_echo "no" >&6; }
-fi
-test -z "$LD" && { { $as_echo "$as_me:$LINENO: error: no acceptable ld found in \$PATH" >&5
-$as_echo "$as_me: error: no acceptable ld found in \$PATH" >&2;}
- { (exit 1); exit 1; }; }
-{ $as_echo "$as_me:$LINENO: checking if the linker ($LD) is GNU ld" >&5
-$as_echo_n "checking if the linker ($LD) is GNU ld... " >&6; }
-if test "${lt_cv_prog_gnu_ld+set}" = set; then
- $as_echo_n "(cached) " >&6
-else
- # I'd rather use --version here, but apparently some GNU lds only accept -v.
-case `$LD -v 2>&1 </dev/null` in
-*GNU* | *'with BFD'*)
- lt_cv_prog_gnu_ld=yes
- ;;
-*)
- lt_cv_prog_gnu_ld=no
- ;;
-esac
-fi
-{ $as_echo "$as_me:$LINENO: result: $lt_cv_prog_gnu_ld" >&5
-$as_echo "$lt_cv_prog_gnu_ld" >&6; }
-with_gnu_ld=$lt_cv_prog_gnu_ld
-
-
-
- # Check if GNU C++ uses GNU ld as the underlying linker, since the
- # archiving commands below assume that GNU ld is being used.
- if test "$with_gnu_ld" = yes; then
- archive_cmds_CXX='$CC -shared -nostdlib $predep_objects $libobjs $deplibs $postdep_objects $compiler_flags ${wl}-soname $wl$soname -o $lib'
- archive_expsym_cmds_CXX='$CC -shared -nostdlib $predep_objects $libobjs $deplibs $postdep_objects $compiler_flags ${wl}-soname $wl$soname ${wl}-retain-symbols-file $wl$export_symbols -o $lib'
-
- hardcode_libdir_flag_spec_CXX='${wl}--rpath ${wl}$libdir'
- export_dynamic_flag_spec_CXX='${wl}--export-dynamic'
-
- # If archive_cmds runs LD, not CC, wlarc should be empty
- # XXX I think wlarc can be eliminated in ltcf-cxx, but I need to
- # investigate it a little bit more. (MM)
- wlarc='${wl}'
-
- # ancient GNU ld didn't support --whole-archive et. al.
- if eval "`$CC -print-prog-name=ld` --help 2>&1" | \
- grep 'no-whole-archive' > /dev/null; then
- whole_archive_flag_spec_CXX="$wlarc"'--whole-archive$convenience '"$wlarc"'--no-whole-archive'
- else
- whole_archive_flag_spec_CXX=
- fi
- else
- with_gnu_ld=no
- wlarc=
-
- # A generic and very simple default shared library creation
- # command for GNU C++ for the case where it uses the native
- # linker, instead of GNU ld. If possible, this setting should
- # overridden to take advantage of the native linker features on
- # the platform it is being used on.
- archive_cmds_CXX='$CC -shared -nostdlib $predep_objects $libobjs $deplibs $postdep_objects $compiler_flags -o $lib'
- fi
-
- # Commands to make compiler produce verbose output that lists
- # what "hidden" libraries, object files and flags are used when
- # linking a shared library.
- output_verbose_link_cmd='$CC -shared $CFLAGS -v conftest.$objext 2>&1 | grep "\-L"'
-
-else
- GXX=no
- with_gnu_ld=no
- wlarc=
-fi
-
-# PORTME: fill in a description of your system's C++ link characteristics
-{ $as_echo "$as_me:$LINENO: checking whether the $compiler linker ($LD) supports shared libraries" >&5
-$as_echo_n "checking whether the $compiler linker ($LD) supports shared libraries... " >&6; }
-ld_shlibs_CXX=yes
-case $host_os in
- aix3*)
- # FIXME: insert proper C++ library support
- ld_shlibs_CXX=no
- ;;
- aix[4-9]*)
- if test "$host_cpu" = ia64; then
- # On IA64, the linker does run time linking by default, so we don't
- # have to do anything special.
- aix_use_runtimelinking=no
- exp_sym_flag='-Bexport'
- no_entry_flag=""
- else
- aix_use_runtimelinking=no
-
- # Test if we are trying to use run time linking or normal
- # AIX style linking. If -brtl is somewhere in LDFLAGS, we
- # need to do runtime linking.
- case $host_os in aix4.[23]|aix4.[23].*|aix[5-9]*)
- for ld_flag in $LDFLAGS; do
- case $ld_flag in
- *-brtl*)
- aix_use_runtimelinking=yes
- break
- ;;
- esac
- done
- ;;
- esac
-
- exp_sym_flag='-bexport'
- no_entry_flag='-bnoentry'
- fi
-
- # When large executables or shared objects are built, AIX ld can
- # have problems creating the table of contents. If linking a library
- # or program results in "error TOC overflow" add -mminimal-toc to
- # CXXFLAGS/CFLAGS for g++/gcc. In the cases where that is not
- # enough to fix the problem, add -Wl,-bbigtoc to LDFLAGS.
-
- archive_cmds_CXX=''
- hardcode_direct_CXX=yes
- hardcode_libdir_separator_CXX=':'
- link_all_deplibs_CXX=yes
-
- if test "$GXX" = yes; then
- case $host_os in aix4.[012]|aix4.[012].*)
- # We only want to do this on AIX 4.2 and lower, the check
- # below for broken collect2 doesn't work under 4.3+
- collect2name=`${CC} -print-prog-name=collect2`
- if test -f "$collect2name" && \
- strings "$collect2name" | grep resolve_lib_name >/dev/null
- then
- # We have reworked collect2
- :
- else
- # We have old collect2
- hardcode_direct_CXX=unsupported
- # It fails to find uninstalled libraries when the uninstalled
- # path is not listed in the libpath. Setting hardcode_minus_L
- # to unsupported forces relinking
- hardcode_minus_L_CXX=yes
- hardcode_libdir_flag_spec_CXX='-L$libdir'
- hardcode_libdir_separator_CXX=
- fi
- ;;
- esac
- shared_flag='-shared'
- if test "$aix_use_runtimelinking" = yes; then
- shared_flag="$shared_flag "'${wl}-G'
- fi
- else
- # not using gcc
- if test "$host_cpu" = ia64; then
- # VisualAge C++, Version 5.5 for AIX 5L for IA-64, Beta 3 Release
- # chokes on -Wl,-G. The following line is correct:
- shared_flag='-G'
- else
- if test "$aix_use_runtimelinking" = yes; then
- shared_flag='${wl}-G'
- else
- shared_flag='${wl}-bM:SRE'
- fi
- fi
- fi
-
- # It seems that -bexpall does not export symbols beginning with
- # underscore (_), so it is better to generate a list of symbols to export.
- always_export_symbols_CXX=yes
- if test "$aix_use_runtimelinking" = yes; then
- # Warning - without using the other runtime loading flags (-brtl),
- # -berok will link without error, but may produce a broken library.
- allow_undefined_flag_CXX='-berok'
- # Determine the default libpath from the value encoded in an empty executable.
- cat >conftest.$ac_ext <<_ACEOF
-/* confdefs.h. */
-_ACEOF
-cat confdefs.h >>conftest.$ac_ext
-cat >>conftest.$ac_ext <<_ACEOF
-/* end confdefs.h. */
-
-int
-main ()
-{
-
- ;
- return 0;
-}
-_ACEOF
-rm -f conftest.$ac_objext conftest$ac_exeext
-if { (ac_try="$ac_link"
-case "(($ac_try" in
- *\"* | *\`* | *\\*) ac_try_echo=\$ac_try;;
- *) ac_try_echo=$ac_try;;
-esac
-eval ac_try_echo="\"\$as_me:$LINENO: $ac_try_echo\""
-$as_echo "$ac_try_echo") >&5
- (eval "$ac_link") 2>conftest.er1
- ac_status=$?
- grep -v '^ *+' conftest.er1 >conftest.err
- rm -f conftest.er1
- cat conftest.err >&5
- $as_echo "$as_me:$LINENO: \$? = $ac_status" >&5
- (exit $ac_status); } && {
- test -z "$ac_cxx_werror_flag" ||
- test ! -s conftest.err
- } && test -s conftest$ac_exeext && {
- test "$cross_compiling" = yes ||
- $as_test_x conftest$ac_exeext
- }; then
-
-lt_aix_libpath_sed='
- /Import File Strings/,/^$/ {
- /^0/ {
- s/^0 *\(.*\)$/\1/
- p
- }
- }'
-aix_libpath=`dump -H conftest$ac_exeext 2>/dev/null | $SED -n -e "$lt_aix_libpath_sed"`
-# Check for a 64-bit object if we didn't find anything.
-if test -z "$aix_libpath"; then
- aix_libpath=`dump -HX64 conftest$ac_exeext 2>/dev/null | $SED -n -e "$lt_aix_libpath_sed"`
-fi
-else
- $as_echo "$as_me: failed program was:" >&5
-sed 's/^/| /' conftest.$ac_ext >&5
-
-
-fi
-
-rm -rf conftest.dSYM
-rm -f core conftest.err conftest.$ac_objext conftest_ipa8_conftest.oo \
- conftest$ac_exeext conftest.$ac_ext
-if test -z "$aix_libpath"; then aix_libpath="/usr/lib:/lib"; fi
-
- hardcode_libdir_flag_spec_CXX='${wl}-blibpath:$libdir:'"$aix_libpath"
-
- archive_expsym_cmds_CXX="\$CC"' -o $output_objdir/$soname $libobjs $deplibs '"\${wl}$no_entry_flag"' $compiler_flags `if test "x${allow_undefined_flag}" != "x"; then echo "${wl}${allow_undefined_flag}"; else :; fi` '"\${wl}$exp_sym_flag:\$export_symbols $shared_flag"
- else
- if test "$host_cpu" = ia64; then
- hardcode_libdir_flag_spec_CXX='${wl}-R $libdir:/usr/lib:/lib'
- allow_undefined_flag_CXX="-z nodefs"
- archive_expsym_cmds_CXX="\$CC $shared_flag"' -o $output_objdir/$soname $libobjs $deplibs '"\${wl}$no_entry_flag"' $compiler_flags ${wl}${allow_undefined_flag} '"\${wl}$exp_sym_flag:\$export_symbols"
- else
- # Determine the default libpath from the value encoded in an empty executable.
- cat >conftest.$ac_ext <<_ACEOF
-/* confdefs.h. */
-_ACEOF
-cat confdefs.h >>conftest.$ac_ext
-cat >>conftest.$ac_ext <<_ACEOF
-/* end confdefs.h. */
-
-int
-main ()
-{
-
- ;
- return 0;
-}
-_ACEOF
-rm -f conftest.$ac_objext conftest$ac_exeext
-if { (ac_try="$ac_link"
-case "(($ac_try" in
- *\"* | *\`* | *\\*) ac_try_echo=\$ac_try;;
- *) ac_try_echo=$ac_try;;
-esac
-eval ac_try_echo="\"\$as_me:$LINENO: $ac_try_echo\""
-$as_echo "$ac_try_echo") >&5
- (eval "$ac_link") 2>conftest.er1
- ac_status=$?
- grep -v '^ *+' conftest.er1 >conftest.err
- rm -f conftest.er1
- cat conftest.err >&5
- $as_echo "$as_me:$LINENO: \$? = $ac_status" >&5
- (exit $ac_status); } && {
- test -z "$ac_cxx_werror_flag" ||
- test ! -s conftest.err
- } && test -s conftest$ac_exeext && {
- test "$cross_compiling" = yes ||
- $as_test_x conftest$ac_exeext
- }; then
-
-lt_aix_libpath_sed='
- /Import File Strings/,/^$/ {
- /^0/ {
- s/^0 *\(.*\)$/\1/
- p
- }
- }'
-aix_libpath=`dump -H conftest$ac_exeext 2>/dev/null | $SED -n -e "$lt_aix_libpath_sed"`
-# Check for a 64-bit object if we didn't find anything.
-if test -z "$aix_libpath"; then
- aix_libpath=`dump -HX64 conftest$ac_exeext 2>/dev/null | $SED -n -e "$lt_aix_libpath_sed"`
-fi
-else
- $as_echo "$as_me: failed program was:" >&5
-sed 's/^/| /' conftest.$ac_ext >&5
-
-
-fi
-
-rm -rf conftest.dSYM
-rm -f core conftest.err conftest.$ac_objext conftest_ipa8_conftest.oo \
- conftest$ac_exeext conftest.$ac_ext
-if test -z "$aix_libpath"; then aix_libpath="/usr/lib:/lib"; fi
-
- hardcode_libdir_flag_spec_CXX='${wl}-blibpath:$libdir:'"$aix_libpath"
- # Warning - without using the other run time loading flags,
- # -berok will link without error, but may produce a broken library.
- no_undefined_flag_CXX=' ${wl}-bernotok'
- allow_undefined_flag_CXX=' ${wl}-berok'
- # Exported symbols can be pulled into shared objects from archives
- whole_archive_flag_spec_CXX='$convenience'
- archive_cmds_need_lc_CXX=yes
- # This is similar to how AIX traditionally builds its shared libraries.
- archive_expsym_cmds_CXX="\$CC $shared_flag"' -o $output_objdir/$soname $libobjs $deplibs ${wl}-bnoentry $compiler_flags ${wl}-bE:$export_symbols${allow_undefined_flag}~$AR $AR_FLAGS $output_objdir/$libname$release.a $output_objdir/$soname'
- fi
- fi
- ;;
-
- beos*)
- if $LD --help 2>&1 | grep ': supported targets:.* elf' > /dev/null; then
- allow_undefined_flag_CXX=unsupported
- # Joseph Beckenbach <jrb3@best.com> says some releases of gcc
- # support --undefined. This deserves some investigation. FIXME
- archive_cmds_CXX='$CC -nostart $libobjs $deplibs $compiler_flags ${wl}-soname $wl$soname -o $lib'
- else
- ld_shlibs_CXX=no
- fi
- ;;
-
- chorus*)
- case $cc_basename in
- *)
- # FIXME: insert proper C++ library support
- ld_shlibs_CXX=no
- ;;
- esac
- ;;
-
- cygwin* | mingw* | pw32*)
- # _LT_AC_TAGVAR(hardcode_libdir_flag_spec, CXX) is actually meaningless,
- # as there is no search path for DLLs.
- hardcode_libdir_flag_spec_CXX='-L$libdir'
- allow_undefined_flag_CXX=unsupported
- always_export_symbols_CXX=no
- enable_shared_with_static_runtimes_CXX=yes
-
- if $LD --help 2>&1 | grep 'auto-import' > /dev/null; then
- archive_cmds_CXX='$CC -shared -nostdlib $predep_objects $libobjs $deplibs $postdep_objects $compiler_flags -o $output_objdir/$soname ${wl}--enable-auto-image-base -Xlinker --out-implib -Xlinker $lib'
- # If the export-symbols file already is a .def file (1st line
- # is EXPORTS), use it as is; otherwise, prepend...
- archive_expsym_cmds_CXX='if test "x`$SED 1q $export_symbols`" = xEXPORTS; then
- cp $export_symbols $output_objdir/$soname.def;
- else
- echo EXPORTS > $output_objdir/$soname.def;
- cat $export_symbols >> $output_objdir/$soname.def;
- fi~
- $CC -shared -nostdlib $output_objdir/$soname.def $predep_objects $libobjs $deplibs $postdep_objects $compiler_flags -o $output_objdir/$soname ${wl}--enable-auto-image-base -Xlinker --out-implib -Xlinker $lib'
- else
- ld_shlibs_CXX=no
- fi
- ;;
- darwin* | rhapsody*)
- archive_cmds_need_lc_CXX=no
- hardcode_direct_CXX=no
- hardcode_automatic_CXX=yes
- hardcode_shlibpath_var_CXX=unsupported
- whole_archive_flag_spec_CXX=''
- link_all_deplibs_CXX=yes
- allow_undefined_flag_CXX="$_lt_dar_allow_undefined"
- if test "$GXX" = yes ; then
- output_verbose_link_cmd='echo'
- archive_cmds_CXX="\$CC -dynamiclib \$allow_undefined_flag -o \$lib \$libobjs \$deplibs \$compiler_flags -install_name \$rpath/\$soname \$verstring $_lt_dar_single_mod${_lt_dsymutil}"
- module_cmds_CXX="\$CC \$allow_undefined_flag -o \$lib -bundle \$libobjs \$deplibs \$compiler_flags${_lt_dsymutil}"
- archive_expsym_cmds_CXX="sed 's,^,_,' < \$export_symbols > \$output_objdir/\${libname}-symbols.expsym~\$CC -dynamiclib \$allow_undefined_flag -o \$lib \$libobjs \$deplibs \$compiler_flags -install_name \$rpath/\$soname \$verstring ${_lt_dar_single_mod}${_lt_dar_export_syms}${_lt_dsymutil}"
- module_expsym_cmds_CXX="sed -e 's,^,_,' < \$export_symbols > \$output_objdir/\${libname}-symbols.expsym~\$CC \$allow_undefined_flag -o \$lib -bundle \$libobjs \$deplibs \$compiler_flags${_lt_dar_export_syms}${_lt_dsymutil}"
- if test "$lt_cv_apple_cc_single_mod" != "yes"; then
- archive_cmds_CXX="\$CC -r -keep_private_externs -nostdlib -o \${lib}-master.o \$libobjs~\$CC -dynamiclib \$allow_undefined_flag -o \$lib \${lib}-master.o \$deplibs \$compiler_flags -install_name \$rpath/\$soname \$verstring${_lt_dsymutil}"
- archive_expsym_cmds_CXX="sed 's,^,_,' < \$export_symbols > \$output_objdir/\${libname}-symbols.expsym~\$CC -r -keep_private_externs -nostdlib -o \${lib}-master.o \$libobjs~\$CC -dynamiclib \$allow_undefined_flag -o \$lib \${lib}-master.o \$deplibs \$compiler_flags -install_name \$rpath/\$soname \$verstring${_lt_dar_export_syms}${_lt_dsymutil}"
- fi
- else
- case $cc_basename in
- xlc*)
- output_verbose_link_cmd='echo'
- archive_cmds_CXX='$CC -qmkshrobj ${wl}-single_module $allow_undefined_flag -o $lib $libobjs $deplibs $compiler_flags ${wl}-install_name ${wl}`echo $rpath/$soname` $xlcverstring'
- module_cmds_CXX='$CC $allow_undefined_flag -o $lib -bundle $libobjs $deplibs$compiler_flags'
- # Don't fix this by using the ld -exported_symbols_list flag, it doesn't exist in older darwin lds
- archive_expsym_cmds_CXX='sed -e "s,#.*,," -e "s,^[ ]*,," -e "s,^\(..*\),_&," < $export_symbols > $output_objdir/${libname}-symbols.expsym~$CC -qmkshrobj ${wl}-single_module $allow_undefined_flag -o $lib $libobjs $deplibs $compiler_flags ${wl}-install_name ${wl}$rpath/$soname $xlcverstring~nmedit -s $output_objdir/${libname}-symbols.expsym ${lib}'
- module_expsym_cmds_CXX='sed -e "s,#.*,," -e "s,^[ ]*,," -e "s,^\(..*\),_&," < $export_symbols > $output_objdir/${libname}-symbols.expsym~$CC $allow_undefined_flag -o $lib -bundle $libobjs $deplibs$compiler_flags~nmedit -s $output_objdir/${libname}-symbols.expsym ${lib}'
- ;;
- *)
- ld_shlibs_CXX=no
- ;;
- esac
- fi
- ;;
-
- dgux*)
- case $cc_basename in
- ec++*)
- # FIXME: insert proper C++ library support
- ld_shlibs_CXX=no
- ;;
- ghcx*)
- # Green Hills C++ Compiler
- # FIXME: insert proper C++ library support
- ld_shlibs_CXX=no
- ;;
- *)
- # FIXME: insert proper C++ library support
- ld_shlibs_CXX=no
- ;;
- esac
- ;;
- freebsd[12]*)
- # C++ shared libraries reported to be fairly broken before switch to ELF
- ld_shlibs_CXX=no
- ;;
- freebsd-elf*)
- archive_cmds_need_lc_CXX=no
- ;;
- freebsd* | dragonfly*)
- # FreeBSD 3 and later use GNU C++ and GNU ld with standard ELF
- # conventions
- ld_shlibs_CXX=yes
- ;;
- gnu*)
- ;;
- hpux9*)
- hardcode_libdir_flag_spec_CXX='${wl}+b ${wl}$libdir'
- hardcode_libdir_separator_CXX=:
- export_dynamic_flag_spec_CXX='${wl}-E'
- hardcode_direct_CXX=yes
- hardcode_minus_L_CXX=yes # Not in the search PATH,
- # but as the default
- # location of the library.
-
- case $cc_basename in
- CC*)
- # FIXME: insert proper C++ library support
- ld_shlibs_CXX=no
- ;;
- aCC*)
- archive_cmds_CXX='$rm $output_objdir/$soname~$CC -b ${wl}+b ${wl}$install_libdir -o $output_objdir/$soname $predep_objects $libobjs $deplibs $postdep_objects $compiler_flags~test $output_objdir/$soname = $lib || mv $output_objdir/$soname $lib'
- # Commands to make compiler produce verbose output that lists
- # what "hidden" libraries, object files and flags are used when
- # linking a shared library.
- #
- # There doesn't appear to be a way to prevent this compiler from
- # explicitly linking system object files so we need to strip them
- # from the output so that they don't get included in the library
- # dependencies.
- output_verbose_link_cmd='templist=`($CC -b $CFLAGS -v conftest.$objext 2>&1) | grep "[-]L"`; list=""; for z in $templist; do case $z in conftest.$objext) list="$list $z";; *.$objext);; *) list="$list $z";;esac; done; echo $list'
- ;;
- *)
- if test "$GXX" = yes; then
- archive_cmds_CXX='$rm $output_objdir/$soname~$CC -shared -nostdlib -fPIC ${wl}+b ${wl}$install_libdir -o $output_objdir/$soname $predep_objects $libobjs $deplibs $postdep_objects $compiler_flags~test $output_objdir/$soname = $lib || mv $output_objdir/$soname $lib'
- else
- # FIXME: insert proper C++ library support
- ld_shlibs_CXX=no
- fi
- ;;
- esac
- ;;
- hpux10*|hpux11*)
- if test $with_gnu_ld = no; then
- hardcode_libdir_flag_spec_CXX='${wl}+b ${wl}$libdir'
- hardcode_libdir_separator_CXX=:
-
- case $host_cpu in
- hppa*64*|ia64*) ;;
- *)
- export_dynamic_flag_spec_CXX='${wl}-E'
- ;;
- esac
- fi
- case $host_cpu in
- hppa*64*|ia64*)
- hardcode_direct_CXX=no
- hardcode_shlibpath_var_CXX=no
- ;;
- *)
- hardcode_direct_CXX=yes
- hardcode_minus_L_CXX=yes # Not in the search PATH,
- # but as the default
- # location of the library.
- ;;
- esac
-
- case $cc_basename in
- CC*)
- # FIXME: insert proper C++ library support
- ld_shlibs_CXX=no
- ;;
- aCC*)
- case $host_cpu in
- hppa*64*)
- archive_cmds_CXX='$CC -b ${wl}+h ${wl}$soname -o $lib $predep_objects $libobjs $deplibs $postdep_objects $compiler_flags'
- ;;
- ia64*)
- archive_cmds_CXX='$CC -b ${wl}+h ${wl}$soname ${wl}+nodefaultrpath -o $lib $predep_objects $libobjs $deplibs $postdep_objects $compiler_flags'
- ;;
- *)
- archive_cmds_CXX='$CC -b ${wl}+h ${wl}$soname ${wl}+b ${wl}$install_libdir -o $lib $predep_objects $libobjs $deplibs $postdep_objects $compiler_flags'
- ;;
- esac
- # Commands to make compiler produce verbose output that lists
- # what "hidden" libraries, object files and flags are used when
- # linking a shared library.
- #
- # There doesn't appear to be a way to prevent this compiler from
- # explicitly linking system object files so we need to strip them
- # from the output so that they don't get included in the library
- # dependencies.
- output_verbose_link_cmd='templist=`($CC -b $CFLAGS -v conftest.$objext 2>&1) | grep "\-L"`; list=""; for z in $templist; do case $z in conftest.$objext) list="$list $z";; *.$objext);; *) list="$list $z";;esac; done; echo $list'
- ;;
- *)
- if test "$GXX" = yes; then
- if test $with_gnu_ld = no; then
- case $host_cpu in
- hppa*64*)
- archive_cmds_CXX='$CC -shared -nostdlib -fPIC ${wl}+h ${wl}$soname -o $lib $predep_objects $libobjs $deplibs $postdep_objects $compiler_flags'
- ;;
- ia64*)
- archive_cmds_CXX='$CC -shared -nostdlib -fPIC ${wl}+h ${wl}$soname ${wl}+nodefaultrpath -o $lib $predep_objects $libobjs $deplibs $postdep_objects $compiler_flags'
- ;;
- *)
- archive_cmds_CXX='$CC -shared -nostdlib -fPIC ${wl}+h ${wl}$soname ${wl}+b ${wl}$install_libdir -o $lib $predep_objects $libobjs $deplibs $postdep_objects $compiler_flags'
- ;;
- esac
- fi
- else
- # FIXME: insert proper C++ library support
- ld_shlibs_CXX=no
- fi
- ;;
- esac
- ;;
- interix[3-9]*)
- hardcode_direct_CXX=no
- hardcode_shlibpath_var_CXX=no
- hardcode_libdir_flag_spec_CXX='${wl}-rpath,$libdir'
- export_dynamic_flag_spec_CXX='${wl}-E'
- # Hack: On Interix 3.x, we cannot compile PIC because of a broken gcc.
- # Instead, shared libraries are loaded at an image base (0x10000000 by
- # default) and relocated if they conflict, which is a slow very memory
- # consuming and fragmenting process. To avoid this, we pick a random,
- # 256 KiB-aligned image base between 0x50000000 and 0x6FFC0000 at link
- # time. Moving up from 0x10000000 also allows more sbrk(2) space.
- archive_cmds_CXX='$CC -shared $pic_flag $libobjs $deplibs $compiler_flags ${wl}-h,$soname ${wl}--image-base,`expr ${RANDOM-$$} % 4096 / 2 \* 262144 + 1342177280` -o $lib'
- archive_expsym_cmds_CXX='sed "s,^,_," $export_symbols >$output_objdir/$soname.expsym~$CC -shared $pic_flag $libobjs $deplibs $compiler_flags ${wl}-h,$soname ${wl}--retain-symbols-file,$output_objdir/$soname.expsym ${wl}--image-base,`expr ${RANDOM-$$} % 4096 / 2 \* 262144 + 1342177280` -o $lib'
- ;;
- irix5* | irix6*)
- case $cc_basename in
- CC*)
- # SGI C++
- archive_cmds_CXX='$CC -shared -all -multigot $predep_objects $libobjs $deplibs $postdep_objects $compiler_flags -soname $soname `test -n "$verstring" && echo -set_version $verstring` -update_registry ${output_objdir}/so_locations -o $lib'
-
- # Archives containing C++ object files must be created using
- # "CC -ar", where "CC" is the IRIX C++ compiler. This is
- # necessary to make sure instantiated templates are included
- # in the archive.
- old_archive_cmds_CXX='$CC -ar -WR,-u -o $oldlib $oldobjs'
- ;;
- *)
- if test "$GXX" = yes; then
- if test "$with_gnu_ld" = no; then
- archive_cmds_CXX='$CC -shared -nostdlib $predep_objects $libobjs $deplibs $postdep_objects $compiler_flags ${wl}-soname ${wl}$soname `test -n "$verstring" && echo ${wl}-set_version ${wl}$verstring` ${wl}-update_registry ${wl}${output_objdir}/so_locations -o $lib'
- else
- archive_cmds_CXX='$CC -shared -nostdlib $predep_objects $libobjs $deplibs $postdep_objects $compiler_flags ${wl}-soname ${wl}$soname `test -n "$verstring" && echo ${wl}-set_version ${wl}$verstring` -o $lib'
- fi
- fi
- link_all_deplibs_CXX=yes
- ;;
- esac
- hardcode_libdir_flag_spec_CXX='${wl}-rpath ${wl}$libdir'
- hardcode_libdir_separator_CXX=:
- ;;
- linux* | k*bsd*-gnu)
- case $cc_basename in
- KCC*)
- # Kuck and Associates, Inc. (KAI) C++ Compiler
-
- # KCC will only create a shared library if the output file
- # ends with ".so" (or ".sl" for HP-UX), so rename the library
- # to its proper name (with version) after linking.
- archive_cmds_CXX='tempext=`echo $shared_ext | $SED -e '\''s/\([^()0-9A-Za-z{}]\)/\\\\\1/g'\''`; templib=`echo $lib | $SED -e "s/\${tempext}\..*/.so/"`; $CC $predep_objects $libobjs $deplibs $postdep_objects $compiler_flags --soname $soname -o \$templib; mv \$templib $lib'
- archive_expsym_cmds_CXX='tempext=`echo $shared_ext | $SED -e '\''s/\([^()0-9A-Za-z{}]\)/\\\\\1/g'\''`; templib=`echo $lib | $SED -e "s/\${tempext}\..*/.so/"`; $CC $predep_objects $libobjs $deplibs $postdep_objects $compiler_flags --soname $soname -o \$templib ${wl}-retain-symbols-file,$export_symbols; mv \$templib $lib'
- # Commands to make compiler produce verbose output that lists
- # what "hidden" libraries, object files and flags are used when
- # linking a shared library.
- #
- # There doesn't appear to be a way to prevent this compiler from
- # explicitly linking system object files so we need to strip them
- # from the output so that they don't get included in the library
- # dependencies.
- output_verbose_link_cmd='templist=`$CC $CFLAGS -v conftest.$objext -o libconftest$shared_ext 2>&1 | grep "ld"`; rm -f libconftest$shared_ext; list=""; for z in $templist; do case $z in conftest.$objext) list="$list $z";; *.$objext);; *) list="$list $z";;esac; done; echo $list'
-
- hardcode_libdir_flag_spec_CXX='${wl}--rpath,$libdir'
- export_dynamic_flag_spec_CXX='${wl}--export-dynamic'
-
- # Archives containing C++ object files must be created using
- # "CC -Bstatic", where "CC" is the KAI C++ compiler.
- old_archive_cmds_CXX='$CC -Bstatic -o $oldlib $oldobjs'
- ;;
- icpc*)
- # Intel C++
- with_gnu_ld=yes
- # version 8.0 and above of icpc choke on multiply defined symbols
- # if we add $predep_objects and $postdep_objects, however 7.1 and
- # earlier do not add the objects themselves.
- case `$CC -V 2>&1` in
- *"Version 7."*)
- archive_cmds_CXX='$CC -shared $predep_objects $libobjs $deplibs $postdep_objects $compiler_flags ${wl}-soname $wl$soname -o $lib'
- archive_expsym_cmds_CXX='$CC -shared $predep_objects $libobjs $deplibs $postdep_objects $compiler_flags ${wl}-soname $wl$soname ${wl}-retain-symbols-file $wl$export_symbols -o $lib'
- ;;
- *) # Version 8.0 or newer
- tmp_idyn=
- case $host_cpu in
- ia64*) tmp_idyn=' -i_dynamic';;
- esac
- archive_cmds_CXX='$CC -shared'"$tmp_idyn"' $libobjs $deplibs $compiler_flags ${wl}-soname $wl$soname -o $lib'
- archive_expsym_cmds_CXX='$CC -shared'"$tmp_idyn"' $libobjs $deplibs $compiler_flags ${wl}-soname $wl$soname ${wl}-retain-symbols-file $wl$export_symbols -o $lib'
- ;;
- esac
- archive_cmds_need_lc_CXX=no
- hardcode_libdir_flag_spec_CXX='${wl}-rpath,$libdir'
- export_dynamic_flag_spec_CXX='${wl}--export-dynamic'
- whole_archive_flag_spec_CXX='${wl}--whole-archive$convenience ${wl}--no-whole-archive'
- ;;
- pgCC* | pgcpp*)
- # Portland Group C++ compiler
- archive_cmds_CXX='$CC -shared $pic_flag $predep_objects $libobjs $deplibs $postdep_objects $compiler_flags ${wl}-soname ${wl}$soname -o $lib'
- archive_expsym_cmds_CXX='$CC -shared $pic_flag $predep_objects $libobjs $deplibs $postdep_objects $compiler_flags ${wl}-soname ${wl}$soname ${wl}-retain-symbols-file ${wl}$export_symbols -o $lib'
-
- hardcode_libdir_flag_spec_CXX='${wl}--rpath ${wl}$libdir'
- export_dynamic_flag_spec_CXX='${wl}--export-dynamic'
- whole_archive_flag_spec_CXX='${wl}--whole-archive`for conv in $convenience\"\"; do test -n \"$conv\" && new_convenience=\"$new_convenience,$conv\"; done; $echo \"$new_convenience\"` ${wl}--no-whole-archive'
- ;;
- cxx*)
- # Compaq C++
- archive_cmds_CXX='$CC -shared $predep_objects $libobjs $deplibs $postdep_objects $compiler_flags ${wl}-soname $wl$soname -o $lib'
- archive_expsym_cmds_CXX='$CC -shared $predep_objects $libobjs $deplibs $postdep_objects $compiler_flags ${wl}-soname $wl$soname -o $lib ${wl}-retain-symbols-file $wl$export_symbols'
-
- runpath_var=LD_RUN_PATH
- hardcode_libdir_flag_spec_CXX='-rpath $libdir'
- hardcode_libdir_separator_CXX=:
-
- # Commands to make compiler produce verbose output that lists
- # what "hidden" libraries, object files and flags are used when
- # linking a shared library.
- #
- # There doesn't appear to be a way to prevent this compiler from
- # explicitly linking system object files so we need to strip them
- # from the output so that they don't get included in the library
- # dependencies.
- output_verbose_link_cmd='templist=`$CC -shared $CFLAGS -v conftest.$objext 2>&1 | grep "ld"`; templist=`echo $templist | $SED "s/\(^.*ld.*\)\( .*ld .*$\)/\1/"`; list=""; for z in $templist; do case $z in conftest.$objext) list="$list $z";; *.$objext);; *) list="$list $z";;esac; done; echo $list'
- ;;
- *)
- case `$CC -V 2>&1 | sed 5q` in
- *Sun\ C*)
- # Sun C++ 5.9
- no_undefined_flag_CXX=' -zdefs'
- archive_cmds_CXX='$CC -G${allow_undefined_flag} -h$soname -o $lib $predep_objects $libobjs $deplibs $postdep_objects $compiler_flags'
- archive_expsym_cmds_CXX='$CC -G${allow_undefined_flag} -h$soname -o $lib $predep_objects $libobjs $deplibs $postdep_objects $compiler_flags ${wl}-retain-symbols-file ${wl}$export_symbols'
- hardcode_libdir_flag_spec_CXX='-R$libdir'
- whole_archive_flag_spec_CXX='${wl}--whole-archive`new_convenience=; for conv in $convenience\"\"; do test -z \"$conv\" || new_convenience=\"$new_convenience,$conv\"; done; $echo \"$new_convenience\"` ${wl}--no-whole-archive'
-
- # Not sure whether something based on
- # $CC $CFLAGS -v conftest.$objext -o libconftest$shared_ext 2>&1
- # would be better.
- output_verbose_link_cmd='echo'
-
- # Archives containing C++ object files must be created using
- # "CC -xar", where "CC" is the Sun C++ compiler. This is
- # necessary to make sure instantiated templates are included
- # in the archive.
- old_archive_cmds_CXX='$CC -xar -o $oldlib $oldobjs'
- ;;
- esac
- ;;
- esac
- ;;
- lynxos*)
- # FIXME: insert proper C++ library support
- ld_shlibs_CXX=no
- ;;
- m88k*)
- # FIXME: insert proper C++ library support
- ld_shlibs_CXX=no
- ;;
- mvs*)
- case $cc_basename in
- cxx*)
- # FIXME: insert proper C++ library support
- ld_shlibs_CXX=no
- ;;
- *)
- # FIXME: insert proper C++ library support
- ld_shlibs_CXX=no
- ;;
- esac
- ;;
- netbsd*)
- if echo __ELF__ | $CC -E - | grep __ELF__ >/dev/null; then
- archive_cmds_CXX='$LD -Bshareable -o $lib $predep_objects $libobjs $deplibs $postdep_objects $linker_flags'
- wlarc=
- hardcode_libdir_flag_spec_CXX='-R$libdir'
- hardcode_direct_CXX=yes
- hardcode_shlibpath_var_CXX=no
- fi
- # Workaround some broken pre-1.5 toolchains
- output_verbose_link_cmd='$CC -shared $CFLAGS -v conftest.$objext 2>&1 | grep conftest.$objext | $SED -e "s:-lgcc -lc -lgcc::"'
- ;;
- openbsd2*)
- # C++ shared libraries are fairly broken
- ld_shlibs_CXX=no
- ;;
- openbsd*)
- if test -f /usr/libexec/ld.so; then
- hardcode_direct_CXX=yes
- hardcode_shlibpath_var_CXX=no
- archive_cmds_CXX='$CC -shared $pic_flag $predep_objects $libobjs $deplibs $postdep_objects $compiler_flags -o $lib'
- hardcode_libdir_flag_spec_CXX='${wl}-rpath,$libdir'
- if test -z "`echo __ELF__ | $CC -E - | grep __ELF__`" || test "$host_os-$host_cpu" = "openbsd2.8-powerpc"; then
- archive_expsym_cmds_CXX='$CC -shared $pic_flag $predep_objects $libobjs $deplibs $postdep_objects $compiler_flags ${wl}-retain-symbols-file,$export_symbols -o $lib'
- export_dynamic_flag_spec_CXX='${wl}-E'
- whole_archive_flag_spec_CXX="$wlarc"'--whole-archive$convenience '"$wlarc"'--no-whole-archive'
- fi
- output_verbose_link_cmd='echo'
- else
- ld_shlibs_CXX=no
- fi
- ;;
- osf3*)
- case $cc_basename in
- KCC*)
- # Kuck and Associates, Inc. (KAI) C++ Compiler
-
- # KCC will only create a shared library if the output file
- # ends with ".so" (or ".sl" for HP-UX), so rename the library
- # to its proper name (with version) after linking.
- archive_cmds_CXX='tempext=`echo $shared_ext | $SED -e '\''s/\([^()0-9A-Za-z{}]\)/\\\\\1/g'\''`; templib=`echo $lib | $SED -e "s/\${tempext}\..*/.so/"`; $CC $predep_objects $libobjs $deplibs $postdep_objects $compiler_flags --soname $soname -o \$templib; mv \$templib $lib'
-
- hardcode_libdir_flag_spec_CXX='${wl}-rpath,$libdir'
- hardcode_libdir_separator_CXX=:
-
- # Archives containing C++ object files must be created using
- # "CC -Bstatic", where "CC" is the KAI C++ compiler.
- old_archive_cmds_CXX='$CC -Bstatic -o $oldlib $oldobjs'
-
- ;;
- RCC*)
- # Rational C++ 2.4.1
- # FIXME: insert proper C++ library support
- ld_shlibs_CXX=no
- ;;
- cxx*)
- allow_undefined_flag_CXX=' ${wl}-expect_unresolved ${wl}\*'
- archive_cmds_CXX='$CC -shared${allow_undefined_flag} $predep_objects $libobjs $deplibs $postdep_objects $compiler_flags ${wl}-soname $soname `test -n "$verstring" && echo ${wl}-set_version $verstring` -update_registry ${output_objdir}/so_locations -o $lib'
-
- hardcode_libdir_flag_spec_CXX='${wl}-rpath ${wl}$libdir'
- hardcode_libdir_separator_CXX=:
-
- # Commands to make compiler produce verbose output that lists
- # what "hidden" libraries, object files and flags are used when
- # linking a shared library.
- #
- # There doesn't appear to be a way to prevent this compiler from
- # explicitly linking system object files so we need to strip them
- # from the output so that they don't get included in the library
- # dependencies.
- output_verbose_link_cmd='templist=`$CC -shared $CFLAGS -v conftest.$objext 2>&1 | grep "ld" | grep -v "ld:"`; templist=`echo $templist | $SED "s/\(^.*ld.*\)\( .*ld.*$\)/\1/"`; list=""; for z in $templist; do case $z in conftest.$objext) list="$list $z";; *.$objext);; *) list="$list $z";;esac; done; echo $list'
- ;;
- *)
- if test "$GXX" = yes && test "$with_gnu_ld" = no; then
- allow_undefined_flag_CXX=' ${wl}-expect_unresolved ${wl}\*'
- archive_cmds_CXX='$CC -shared -nostdlib ${allow_undefined_flag} $predep_objects $libobjs $deplibs $postdep_objects $compiler_flags ${wl}-soname ${wl}$soname `test -n "$verstring" && echo ${wl}-set_version ${wl}$verstring` ${wl}-update_registry ${wl}${output_objdir}/so_locations -o $lib'
-
- hardcode_libdir_flag_spec_CXX='${wl}-rpath ${wl}$libdir'
- hardcode_libdir_separator_CXX=:
-
- # Commands to make compiler produce verbose output that lists
- # what "hidden" libraries, object files and flags are used when
- # linking a shared library.
- output_verbose_link_cmd='$CC -shared $CFLAGS -v conftest.$objext 2>&1 | grep "\-L"'
-
- else
- # FIXME: insert proper C++ library support
- ld_shlibs_CXX=no
- fi
- ;;
- esac
- ;;
- osf4* | osf5*)
- case $cc_basename in
- KCC*)
- # Kuck and Associates, Inc. (KAI) C++ Compiler
-
- # KCC will only create a shared library if the output file
- # ends with ".so" (or ".sl" for HP-UX), so rename the library
- # to its proper name (with version) after linking.
- archive_cmds_CXX='tempext=`echo $shared_ext | $SED -e '\''s/\([^()0-9A-Za-z{}]\)/\\\\\1/g'\''`; templib=`echo $lib | $SED -e "s/\${tempext}\..*/.so/"`; $CC $predep_objects $libobjs $deplibs $postdep_objects $compiler_flags --soname $soname -o \$templib; mv \$templib $lib'
-
- hardcode_libdir_flag_spec_CXX='${wl}-rpath,$libdir'
- hardcode_libdir_separator_CXX=:
-
- # Archives containing C++ object files must be created using
- # the KAI C++ compiler.
- old_archive_cmds_CXX='$CC -o $oldlib $oldobjs'
- ;;
- RCC*)
- # Rational C++ 2.4.1
- # FIXME: insert proper C++ library support
- ld_shlibs_CXX=no
- ;;
- cxx*)
- allow_undefined_flag_CXX=' -expect_unresolved \*'
- archive_cmds_CXX='$CC -shared${allow_undefined_flag} $predep_objects $libobjs $deplibs $postdep_objects $compiler_flags -msym -soname $soname `test -n "$verstring" && echo -set_version $verstring` -update_registry ${output_objdir}/so_locations -o $lib'
- archive_expsym_cmds_CXX='for i in `cat $export_symbols`; do printf "%s %s\\n" -exported_symbol "\$i" >> $lib.exp; done~
- echo "-hidden">> $lib.exp~
- $CC -shared$allow_undefined_flag $predep_objects $libobjs $deplibs $postdep_objects $compiler_flags -msym -soname $soname -Wl,-input -Wl,$lib.exp `test -n "$verstring" && echo -set_version $verstring` -update_registry ${output_objdir}/so_locations -o $lib~
- $rm $lib.exp'
-
- hardcode_libdir_flag_spec_CXX='-rpath $libdir'
- hardcode_libdir_separator_CXX=:
-
- # Commands to make compiler produce verbose output that lists
- # what "hidden" libraries, object files and flags are used when
- # linking a shared library.
- #
- # There doesn't appear to be a way to prevent this compiler from
- # explicitly linking system object files so we need to strip them
- # from the output so that they don't get included in the library
- # dependencies.
- output_verbose_link_cmd='templist=`$CC -shared $CFLAGS -v conftest.$objext 2>&1 | grep "ld" | grep -v "ld:"`; templist=`echo $templist | $SED "s/\(^.*ld.*\)\( .*ld.*$\)/\1/"`; list=""; for z in $templist; do case $z in conftest.$objext) list="$list $z";; *.$objext);; *) list="$list $z";;esac; done; echo $list'
- ;;
- *)
- if test "$GXX" = yes && test "$with_gnu_ld" = no; then
- allow_undefined_flag_CXX=' ${wl}-expect_unresolved ${wl}\*'
- archive_cmds_CXX='$CC -shared -nostdlib ${allow_undefined_flag} $predep_objects $libobjs $deplibs $postdep_objects $compiler_flags ${wl}-msym ${wl}-soname ${wl}$soname `test -n "$verstring" && echo ${wl}-set_version ${wl}$verstring` ${wl}-update_registry ${wl}${output_objdir}/so_locations -o $lib'
-
- hardcode_libdir_flag_spec_CXX='${wl}-rpath ${wl}$libdir'
- hardcode_libdir_separator_CXX=:
-
- # Commands to make compiler produce verbose output that lists
- # what "hidden" libraries, object files and flags are used when
- # linking a shared library.
- output_verbose_link_cmd='$CC -shared $CFLAGS -v conftest.$objext 2>&1 | grep "\-L"'
-
- else
- # FIXME: insert proper C++ library support
- ld_shlibs_CXX=no
- fi
- ;;
- esac
- ;;
- psos*)
- # FIXME: insert proper C++ library support
- ld_shlibs_CXX=no
- ;;
- sunos4*)
- case $cc_basename in
- CC*)
- # Sun C++ 4.x
- # FIXME: insert proper C++ library support
- ld_shlibs_CXX=no
- ;;
- lcc*)
- # Lucid
- # FIXME: insert proper C++ library support
- ld_shlibs_CXX=no
- ;;
- *)
- # FIXME: insert proper C++ library support
- ld_shlibs_CXX=no
- ;;
- esac
- ;;
- solaris*)
- case $cc_basename in
- CC*)
- # Sun C++ 4.2, 5.x and Centerline C++
- archive_cmds_need_lc_CXX=yes
- no_undefined_flag_CXX=' -zdefs'
- archive_cmds_CXX='$CC -G${allow_undefined_flag} -h$soname -o $lib $predep_objects $libobjs $deplibs $postdep_objects $compiler_flags'
- archive_expsym_cmds_CXX='$echo "{ global:" > $lib.exp~cat $export_symbols | $SED -e "s/\(.*\)/\1;/" >> $lib.exp~$echo "local: *; };" >> $lib.exp~
- $CC -G${allow_undefined_flag} ${wl}-M ${wl}$lib.exp -h$soname -o $lib $predep_objects $libobjs $deplibs $postdep_objects $compiler_flags~$rm $lib.exp'
-
- hardcode_libdir_flag_spec_CXX='-R$libdir'
- hardcode_shlibpath_var_CXX=no
- case $host_os in
- solaris2.[0-5] | solaris2.[0-5].*) ;;
- *)
- # The compiler driver will combine and reorder linker options,
- # but understands `-z linker_flag'.
- # Supported since Solaris 2.6 (maybe 2.5.1?)
- whole_archive_flag_spec_CXX='-z allextract$convenience -z defaultextract'
- ;;
- esac
- link_all_deplibs_CXX=yes
-
- output_verbose_link_cmd='echo'
-
- # Archives containing C++ object files must be created using
- # "CC -xar", where "CC" is the Sun C++ compiler. This is
- # necessary to make sure instantiated templates are included
- # in the archive.
- old_archive_cmds_CXX='$CC -xar -o $oldlib $oldobjs'
- ;;
- gcx*)
- # Green Hills C++ Compiler
- archive_cmds_CXX='$CC -shared $predep_objects $libobjs $deplibs $postdep_objects $compiler_flags ${wl}-h $wl$soname -o $lib'
-
- # The C++ compiler must be used to create the archive.
- old_archive_cmds_CXX='$CC $LDFLAGS -archive -o $oldlib $oldobjs'
- ;;
- *)
- # GNU C++ compiler with Solaris linker
- if test "$GXX" = yes && test "$with_gnu_ld" = no; then
- no_undefined_flag_CXX=' ${wl}-z ${wl}defs'
- if $CC --version | grep -v '^2\.7' > /dev/null; then
- archive_cmds_CXX='$CC -shared -nostdlib $LDFLAGS $predep_objects $libobjs $deplibs $postdep_objects $compiler_flags ${wl}-h $wl$soname -o $lib'
- archive_expsym_cmds_CXX='$echo "{ global:" > $lib.exp~cat $export_symbols | $SED -e "s/\(.*\)/\1;/" >> $lib.exp~$echo "local: *; };" >> $lib.exp~
- $CC -shared -nostdlib ${wl}-M $wl$lib.exp -o $lib $predep_objects $libobjs $deplibs $postdep_objects $compiler_flags~$rm $lib.exp'
-
- # Commands to make compiler produce verbose output that lists
- # what "hidden" libraries, object files and flags are used when
- # linking a shared library.
- output_verbose_link_cmd="$CC -shared $CFLAGS -v conftest.$objext 2>&1 | grep \"\-L\""
- else
- # g++ 2.7 appears to require `-G' NOT `-shared' on this
- # platform.
- archive_cmds_CXX='$CC -G -nostdlib $LDFLAGS $predep_objects $libobjs $deplibs $postdep_objects $compiler_flags ${wl}-h $wl$soname -o $lib'
- archive_expsym_cmds_CXX='$echo "{ global:" > $lib.exp~cat $export_symbols | $SED -e "s/\(.*\)/\1;/" >> $lib.exp~$echo "local: *; };" >> $lib.exp~
- $CC -G -nostdlib ${wl}-M $wl$lib.exp -o $lib $predep_objects $libobjs $deplibs $postdep_objects $compiler_flags~$rm $lib.exp'
-
- # Commands to make compiler produce verbose output that lists
- # what "hidden" libraries, object files and flags are used when
- # linking a shared library.
- output_verbose_link_cmd="$CC -G $CFLAGS -v conftest.$objext 2>&1 | grep \"\-L\""
- fi
-
- hardcode_libdir_flag_spec_CXX='${wl}-R $wl$libdir'
- case $host_os in
- solaris2.[0-5] | solaris2.[0-5].*) ;;
- *)
- whole_archive_flag_spec_CXX='${wl}-z ${wl}allextract$convenience ${wl}-z ${wl}defaultextract'
- ;;
- esac
- fi
- ;;
- esac
- ;;
- sysv4*uw2* | sysv5OpenUNIX* | sysv5UnixWare7.[01].[10]* | unixware7* | sco3.2v5.0.[024]*)
- no_undefined_flag_CXX='${wl}-z,text'
- archive_cmds_need_lc_CXX=no
- hardcode_shlibpath_var_CXX=no
- runpath_var='LD_RUN_PATH'
-
- case $cc_basename in
- CC*)
- archive_cmds_CXX='$CC -G ${wl}-h,$soname -o $lib $libobjs $deplibs $compiler_flags'
- archive_expsym_cmds_CXX='$CC -G ${wl}-Bexport:$export_symbols ${wl}-h,$soname -o $lib $libobjs $deplibs $compiler_flags'
- ;;
- *)
- archive_cmds_CXX='$CC -shared ${wl}-h,$soname -o $lib $libobjs $deplibs $compiler_flags'
- archive_expsym_cmds_CXX='$CC -shared ${wl}-Bexport:$export_symbols ${wl}-h,$soname -o $lib $libobjs $deplibs $compiler_flags'
- ;;
- esac
- ;;
- sysv5* | sco3.2v5* | sco5v6*)
- # Note: We can NOT use -z defs as we might desire, because we do not
- # link with -lc, and that would cause any symbols used from libc to
- # always be unresolved, which means just about no library would
- # ever link correctly. If we're not using GNU ld we use -z text
- # though, which does catch some bad symbols but isn't as heavy-handed
- # as -z defs.
- # For security reasons, it is highly recommended that you always
- # use absolute paths for naming shared libraries, and exclude the
- # DT_RUNPATH tag from executables and libraries. But doing so
- # requires that you compile everything twice, which is a pain.
- # So that behaviour is only enabled if SCOABSPATH is set to a
- # non-empty value in the environment. Most likely only useful for
- # creating official distributions of packages.
- # This is a hack until libtool officially supports absolute path
- # names for shared libraries.
- no_undefined_flag_CXX='${wl}-z,text'
- allow_undefined_flag_CXX='${wl}-z,nodefs'
- archive_cmds_need_lc_CXX=no
- hardcode_shlibpath_var_CXX=no
- hardcode_libdir_flag_spec_CXX='`test -z "$SCOABSPATH" && echo ${wl}-R,$libdir`'
- hardcode_libdir_separator_CXX=':'
- link_all_deplibs_CXX=yes
- export_dynamic_flag_spec_CXX='${wl}-Bexport'
- runpath_var='LD_RUN_PATH'
-
- case $cc_basename in
- CC*)
- archive_cmds_CXX='$CC -G ${wl}-h,\${SCOABSPATH:+${install_libdir}/}$soname -o $lib $libobjs $deplibs $compiler_flags'
- archive_expsym_cmds_CXX='$CC -G ${wl}-Bexport:$export_symbols ${wl}-h,\${SCOABSPATH:+${install_libdir}/}$soname -o $lib $libobjs $deplibs $compiler_flags'
- ;;
- *)
- archive_cmds_CXX='$CC -shared ${wl}-h,\${SCOABSPATH:+${install_libdir}/}$soname -o $lib $libobjs $deplibs $compiler_flags'
- archive_expsym_cmds_CXX='$CC -shared ${wl}-Bexport:$export_symbols ${wl}-h,\${SCOABSPATH:+${install_libdir}/}$soname -o $lib $libobjs $deplibs $compiler_flags'
- ;;
- esac
- ;;
- tandem*)
- case $cc_basename in
- NCC*)
- # NonStop-UX NCC 3.20
- # FIXME: insert proper C++ library support
- ld_shlibs_CXX=no
- ;;
- *)
- # FIXME: insert proper C++ library support
- ld_shlibs_CXX=no
- ;;
- esac
- ;;
- vxworks*)
- # FIXME: insert proper C++ library support
- ld_shlibs_CXX=no
- ;;
- *)
- # FIXME: insert proper C++ library support
- ld_shlibs_CXX=no
- ;;
-esac
-{ $as_echo "$as_me:$LINENO: result: $ld_shlibs_CXX" >&5
-$as_echo "$ld_shlibs_CXX" >&6; }
-test "$ld_shlibs_CXX" = no && can_build_shared=no
-
-GCC_CXX="$GXX"
-LD_CXX="$LD"
-
-cat > conftest.$ac_ext <<EOF
-class Foo
-{
-public:
- Foo (void) { a = 0; }
-private:
- int a;
-};
-EOF
-
-if { (eval echo "$as_me:$LINENO: \"$ac_compile\"") >&5
- (eval $ac_compile) 2>&5
- ac_status=$?
- $as_echo "$as_me:$LINENO: \$? = $ac_status" >&5
- (exit $ac_status); }; then
- # Parse the compiler output and extract the necessary
- # objects, libraries and library flags.
-
- # Sentinel used to keep track of whether or not we are before
- # the conftest object file.
- pre_test_object_deps_done=no
-
- # The `*' in the case matches for architectures that use `case' in
- # $output_verbose_cmd can trigger glob expansion during the loop
- # eval without this substitution.
- output_verbose_link_cmd=`$echo "X$output_verbose_link_cmd" | $Xsed -e "$no_glob_subst"`
-
- for p in `eval $output_verbose_link_cmd`; do
- case $p in
-
- -L* | -R* | -l*)
- # Some compilers place space between "-{L,R}" and the path.
- # Remove the space.
- if test $p = "-L" \
- || test $p = "-R"; then
- prev=$p
- continue
- else
- prev=
- fi
-
- if test "$pre_test_object_deps_done" = no; then
- case $p in
- -L* | -R*)
- # Internal compiler library paths should come after those
- # provided the user. The postdeps already come after the
- # user supplied libs so there is no need to process them.
- if test -z "$compiler_lib_search_path_CXX"; then
- compiler_lib_search_path_CXX="${prev}${p}"
- else
- compiler_lib_search_path_CXX="${compiler_lib_search_path_CXX} ${prev}${p}"
- fi
- ;;
- # The "-l" case would never come before the object being
- # linked, so don't bother handling this case.
- esac
- else
- if test -z "$postdeps_CXX"; then
- postdeps_CXX="${prev}${p}"
- else
- postdeps_CXX="${postdeps_CXX} ${prev}${p}"
- fi
- fi
- ;;
-
- *.$objext)
- # This assumes that the test object file only shows up
- # once in the compiler output.
- if test "$p" = "conftest.$objext"; then
- pre_test_object_deps_done=yes
- continue
- fi
-
- if test "$pre_test_object_deps_done" = no; then
- if test -z "$predep_objects_CXX"; then
- predep_objects_CXX="$p"
- else
- predep_objects_CXX="$predep_objects_CXX $p"
- fi
- else
- if test -z "$postdep_objects_CXX"; then
- postdep_objects_CXX="$p"
- else
- postdep_objects_CXX="$postdep_objects_CXX $p"
- fi
- fi
- ;;
-
- *) ;; # Ignore the rest.
-
- esac
- done
-
- # Clean up.
- rm -f a.out a.exe
-else
- echo "libtool.m4: error: problem compiling CXX test program"
-fi
-
-$rm -f confest.$objext
-
-compiler_lib_search_dirs_CXX=
-if test -n "$compiler_lib_search_path_CXX"; then
- compiler_lib_search_dirs_CXX=`echo " ${compiler_lib_search_path_CXX}" | ${SED} -e 's! -L! !g' -e 's!^ !!'`
-fi
-
-# PORTME: override above test on systems where it is broken
-case $host_os in
-interix[3-9]*)
- # Interix 3.5 installs completely hosed .la files for C++, so rather than
- # hack all around it, let's just trust "g++" to DTRT.
- predep_objects_CXX=
- postdep_objects_CXX=
- postdeps_CXX=
- ;;
-
-linux*)
- case `$CC -V 2>&1 | sed 5q` in
- *Sun\ C*)
- # Sun C++ 5.9
- #
- # The more standards-conforming stlport4 library is
- # incompatible with the Cstd library. Avoid specifying
- # it if it's in CXXFLAGS. Ignore libCrun as
- # -library=stlport4 depends on it.
- case " $CXX $CXXFLAGS " in
- *" -library=stlport4 "*)
- solaris_use_stlport4=yes
- ;;
- esac
- if test "$solaris_use_stlport4" != yes; then
- postdeps_CXX='-library=Cstd -library=Crun'
- fi
- ;;
- esac
- ;;
-
-solaris*)
- case $cc_basename in
- CC*)
- # The more standards-conforming stlport4 library is
- # incompatible with the Cstd library. Avoid specifying
- # it if it's in CXXFLAGS. Ignore libCrun as
- # -library=stlport4 depends on it.
- case " $CXX $CXXFLAGS " in
- *" -library=stlport4 "*)
- solaris_use_stlport4=yes
- ;;
- esac
-
- # Adding this requires a known-good setup of shared libraries for
- # Sun compiler versions before 5.6, else PIC objects from an old
- # archive will be linked into the output, leading to subtle bugs.
- if test "$solaris_use_stlport4" != yes; then
- postdeps_CXX='-library=Cstd -library=Crun'
- fi
- ;;
- esac
- ;;
-esac
-
-case " $postdeps_CXX " in
-*" -lc "*) archive_cmds_need_lc_CXX=no ;;
-esac
-
-lt_prog_compiler_wl_CXX=
-lt_prog_compiler_pic_CXX=
-lt_prog_compiler_static_CXX=
-
-{ $as_echo "$as_me:$LINENO: checking for $compiler option to produce PIC" >&5
-$as_echo_n "checking for $compiler option to produce PIC... " >&6; }
-
- # C++ specific cases for pic, static, wl, etc.
- if test "$GXX" = yes; then
- lt_prog_compiler_wl_CXX='-Wl,'
- lt_prog_compiler_static_CXX='-static'
-
- case $host_os in
- aix*)
- # All AIX code is PIC.
- if test "$host_cpu" = ia64; then
- # AIX 5 now supports IA64 processor
- lt_prog_compiler_static_CXX='-Bstatic'
- fi
- ;;
- amigaos*)
- # FIXME: we need at least 68020 code to build shared libraries, but
- # adding the `-m68020' flag to GCC prevents building anything better,
- # like `-m68040'.
- lt_prog_compiler_pic_CXX='-m68020 -resident32 -malways-restore-a4'
- ;;
- beos* | irix5* | irix6* | nonstopux* | osf3* | osf4* | osf5*)
- # PIC is the default for these OSes.
- ;;
- mingw* | cygwin* | os2* | pw32*)
- # This hack is so that the source file can tell whether it is being
- # built for inclusion in a dll (and should export symbols for example).
- # Although the cygwin gcc ignores -fPIC, still need this for old-style
- # (--disable-auto-import) libraries
- lt_prog_compiler_pic_CXX='-DDLL_EXPORT'
- ;;
- darwin* | rhapsody*)
- # PIC is the default on this platform
- # Common symbols not allowed in MH_DYLIB files
- lt_prog_compiler_pic_CXX='-fno-common'
- ;;
- *djgpp*)
- # DJGPP does not support shared libraries at all
- lt_prog_compiler_pic_CXX=
- ;;
- interix[3-9]*)
- # Interix 3.x gcc -fpic/-fPIC options generate broken code.
- # Instead, we relocate shared libraries at runtime.
- ;;
- sysv4*MP*)
- if test -d /usr/nec; then
- lt_prog_compiler_pic_CXX=-Kconform_pic
- fi
- ;;
- hpux*)
- # PIC is the default for IA64 HP-UX and 64-bit HP-UX, but
- # not for PA HP-UX.
- case $host_cpu in
- hppa*64*|ia64*)
- ;;
- *)
- lt_prog_compiler_pic_CXX='-fPIC'
- ;;
- esac
- ;;
- *)
- lt_prog_compiler_pic_CXX='-fPIC'
- ;;
- esac
- else
- case $host_os in
- aix[4-9]*)
- # All AIX code is PIC.
- if test "$host_cpu" = ia64; then
- # AIX 5 now supports IA64 processor
- lt_prog_compiler_static_CXX='-Bstatic'
- else
- lt_prog_compiler_static_CXX='-bnso -bI:/lib/syscalls.exp'
- fi
- ;;
- chorus*)
- case $cc_basename in
- cxch68*)
- # Green Hills C++ Compiler
- # _LT_AC_TAGVAR(lt_prog_compiler_static, CXX)="--no_auto_instantiation -u __main -u __premain -u _abort -r $COOL_DIR/lib/libOrb.a $MVME_DIR/lib/CC/libC.a $MVME_DIR/lib/classix/libcx.s.a"
- ;;
- esac
- ;;
- darwin*)
- # PIC is the default on this platform
- # Common symbols not allowed in MH_DYLIB files
- case $cc_basename in
- xlc*)
- lt_prog_compiler_pic_CXX='-qnocommon'
- lt_prog_compiler_wl_CXX='-Wl,'
- ;;
- esac
- ;;
- dgux*)
- case $cc_basename in
- ec++*)
- lt_prog_compiler_pic_CXX='-KPIC'
- ;;
- ghcx*)
- # Green Hills C++ Compiler
- lt_prog_compiler_pic_CXX='-pic'
- ;;
- *)
- ;;
- esac
- ;;
- freebsd* | dragonfly*)
- # FreeBSD uses GNU C++
- ;;
- hpux9* | hpux10* | hpux11*)
- case $cc_basename in
- CC*)
- lt_prog_compiler_wl_CXX='-Wl,'
- lt_prog_compiler_static_CXX='${wl}-a ${wl}archive'
- if test "$host_cpu" != ia64; then
- lt_prog_compiler_pic_CXX='+Z'
- fi
- ;;
- aCC*)
- lt_prog_compiler_wl_CXX='-Wl,'
- lt_prog_compiler_static_CXX='${wl}-a ${wl}archive'
- case $host_cpu in
- hppa*64*|ia64*)
- # +Z the default
- ;;
- *)
- lt_prog_compiler_pic_CXX='+Z'
- ;;
- esac
- ;;
- *)
- ;;
- esac
- ;;
- interix*)
- # This is c89, which is MS Visual C++ (no shared libs)
- # Anyone wants to do a port?
- ;;
- irix5* | irix6* | nonstopux*)
- case $cc_basename in
- CC*)
- lt_prog_compiler_wl_CXX='-Wl,'
- lt_prog_compiler_static_CXX='-non_shared'
- # CC pic flag -KPIC is the default.
- ;;
- *)
- ;;
- esac
- ;;
- linux* | k*bsd*-gnu)
- case $cc_basename in
- KCC*)
- # KAI C++ Compiler
- lt_prog_compiler_wl_CXX='--backend -Wl,'
- lt_prog_compiler_pic_CXX='-fPIC'
- ;;
- icpc* | ecpc*)
- # Intel C++
- lt_prog_compiler_wl_CXX='-Wl,'
- lt_prog_compiler_pic_CXX='-KPIC'
- lt_prog_compiler_static_CXX='-static'
- ;;
- pgCC* | pgcpp*)
- # Portland Group C++ compiler.
- lt_prog_compiler_wl_CXX='-Wl,'
- lt_prog_compiler_pic_CXX='-fpic'
- lt_prog_compiler_static_CXX='-Bstatic'
- ;;
- cxx*)
- # Compaq C++
- # Make sure the PIC flag is empty. It appears that all Alpha
- # Linux and Compaq Tru64 Unix objects are PIC.
- lt_prog_compiler_pic_CXX=
- lt_prog_compiler_static_CXX='-non_shared'
- ;;
- *)
- case `$CC -V 2>&1 | sed 5q` in
- *Sun\ C*)
- # Sun C++ 5.9
- lt_prog_compiler_pic_CXX='-KPIC'
- lt_prog_compiler_static_CXX='-Bstatic'
- lt_prog_compiler_wl_CXX='-Qoption ld '
- ;;
- esac
- ;;
- esac
- ;;
- lynxos*)
- ;;
- m88k*)
- ;;
- mvs*)
- case $cc_basename in
- cxx*)
- lt_prog_compiler_pic_CXX='-W c,exportall'
- ;;
- *)
- ;;
- esac
- ;;
- netbsd*)
- ;;
- osf3* | osf4* | osf5*)
- case $cc_basename in
- KCC*)
- lt_prog_compiler_wl_CXX='--backend -Wl,'
- ;;
- RCC*)
- # Rational C++ 2.4.1
- lt_prog_compiler_pic_CXX='-pic'
- ;;
- cxx*)
- # Digital/Compaq C++
- lt_prog_compiler_wl_CXX='-Wl,'
- # Make sure the PIC flag is empty. It appears that all Alpha
- # Linux and Compaq Tru64 Unix objects are PIC.
- lt_prog_compiler_pic_CXX=
- lt_prog_compiler_static_CXX='-non_shared'
- ;;
- *)
- ;;
- esac
- ;;
- psos*)
- ;;
- solaris*)
- case $cc_basename in
- CC*)
- # Sun C++ 4.2, 5.x and Centerline C++
- lt_prog_compiler_pic_CXX='-KPIC'
- lt_prog_compiler_static_CXX='-Bstatic'
- lt_prog_compiler_wl_CXX='-Qoption ld '
- ;;
- gcx*)
- # Green Hills C++ Compiler
- lt_prog_compiler_pic_CXX='-PIC'
- ;;
- *)
- ;;
- esac
- ;;
- sunos4*)
- case $cc_basename in
- CC*)
- # Sun C++ 4.x
- lt_prog_compiler_pic_CXX='-pic'
- lt_prog_compiler_static_CXX='-Bstatic'
- ;;
- lcc*)
- # Lucid
- lt_prog_compiler_pic_CXX='-pic'
- ;;
- *)
- ;;
- esac
- ;;
- tandem*)
- case $cc_basename in
- NCC*)
- # NonStop-UX NCC 3.20
- lt_prog_compiler_pic_CXX='-KPIC'
- ;;
- *)
- ;;
- esac
- ;;
- sysv5* | unixware* | sco3.2v5* | sco5v6* | OpenUNIX*)
- case $cc_basename in
- CC*)
- lt_prog_compiler_wl_CXX='-Wl,'
- lt_prog_compiler_pic_CXX='-KPIC'
- lt_prog_compiler_static_CXX='-Bstatic'
- ;;
- esac
- ;;
- vxworks*)
- ;;
- *)
- lt_prog_compiler_can_build_shared_CXX=no
- ;;
- esac
- fi
-
-{ $as_echo "$as_me:$LINENO: result: $lt_prog_compiler_pic_CXX" >&5
-$as_echo "$lt_prog_compiler_pic_CXX" >&6; }
-
-#
-# Check to make sure the PIC flag actually works.
-#
-if test -n "$lt_prog_compiler_pic_CXX"; then
-
-{ $as_echo "$as_me:$LINENO: checking if $compiler PIC flag $lt_prog_compiler_pic_CXX works" >&5
-$as_echo_n "checking if $compiler PIC flag $lt_prog_compiler_pic_CXX works... " >&6; }
-if test "${lt_cv_prog_compiler_pic_works_CXX+set}" = set; then
- $as_echo_n "(cached) " >&6
-else
- lt_cv_prog_compiler_pic_works_CXX=no
- ac_outfile=conftest.$ac_objext
- echo "$lt_simple_compile_test_code" > conftest.$ac_ext
- lt_compiler_flag="$lt_prog_compiler_pic_CXX -DPIC"
- # Insert the option either (1) after the last *FLAGS variable, or
- # (2) before a word containing "conftest.", or (3) at the end.
- # Note that $ac_compile itself does not contain backslashes and begins
- # with a dollar sign (not a hyphen), so the echo should work correctly.
- # The option is referenced via a variable to avoid confusing sed.
- lt_compile=`echo "$ac_compile" | $SED \
- -e 's:.*FLAGS}\{0,1\} :&$lt_compiler_flag :; t' \
- -e 's: [^ ]*conftest\.: $lt_compiler_flag&:; t' \
- -e 's:$: $lt_compiler_flag:'`
- (eval echo "\"\$as_me:15230: $lt_compile\"" >&5)
- (eval "$lt_compile" 2>conftest.err)
- ac_status=$?
- cat conftest.err >&5
- echo "$as_me:15234: \$? = $ac_status" >&5
- if (exit $ac_status) && test -s "$ac_outfile"; then
- # The compiler can only warn and ignore the option if not recognized
- # So say no if there are warnings other than the usual output.
- $echo "X$_lt_compiler_boilerplate" | $Xsed -e '/^$/d' >conftest.exp
- $SED '/^$/d; /^ *+/d' conftest.err >conftest.er2
- if test ! -s conftest.er2 || diff conftest.exp conftest.er2 >/dev/null; then
- lt_cv_prog_compiler_pic_works_CXX=yes
- fi
- fi
- $rm conftest*
-
-fi
-{ $as_echo "$as_me:$LINENO: result: $lt_cv_prog_compiler_pic_works_CXX" >&5
-$as_echo "$lt_cv_prog_compiler_pic_works_CXX" >&6; }
-
-if test x"$lt_cv_prog_compiler_pic_works_CXX" = xyes; then
- case $lt_prog_compiler_pic_CXX in
- "" | " "*) ;;
- *) lt_prog_compiler_pic_CXX=" $lt_prog_compiler_pic_CXX" ;;
- esac
-else
- lt_prog_compiler_pic_CXX=
- lt_prog_compiler_can_build_shared_CXX=no
-fi
-
-fi
-case $host_os in
- # For platforms which do not support PIC, -DPIC is meaningless:
- *djgpp*)
- lt_prog_compiler_pic_CXX=
- ;;
- *)
- lt_prog_compiler_pic_CXX="$lt_prog_compiler_pic_CXX -DPIC"
- ;;
-esac
-
-#
-# Check to make sure the static flag actually works.
-#
-wl=$lt_prog_compiler_wl_CXX eval lt_tmp_static_flag=\"$lt_prog_compiler_static_CXX\"
-{ $as_echo "$as_me:$LINENO: checking if $compiler static flag $lt_tmp_static_flag works" >&5
-$as_echo_n "checking if $compiler static flag $lt_tmp_static_flag works... " >&6; }
-if test "${lt_cv_prog_compiler_static_works_CXX+set}" = set; then
- $as_echo_n "(cached) " >&6
-else
- lt_cv_prog_compiler_static_works_CXX=no
- save_LDFLAGS="$LDFLAGS"
- LDFLAGS="$LDFLAGS $lt_tmp_static_flag"
- echo "$lt_simple_link_test_code" > conftest.$ac_ext
- if (eval $ac_link 2>conftest.err) && test -s conftest$ac_exeext; then
- # The linker can only warn and ignore the option if not recognized
- # So say no if there are warnings
- if test -s conftest.err; then
- # Append any errors to the config.log.
- cat conftest.err 1>&5
- $echo "X$_lt_linker_boilerplate" | $Xsed -e '/^$/d' > conftest.exp
- $SED '/^$/d; /^ *+/d' conftest.err >conftest.er2
- if diff conftest.exp conftest.er2 >/dev/null; then
- lt_cv_prog_compiler_static_works_CXX=yes
- fi
- else
- lt_cv_prog_compiler_static_works_CXX=yes
- fi
- fi
- $rm -r conftest*
- LDFLAGS="$save_LDFLAGS"
-
-fi
-{ $as_echo "$as_me:$LINENO: result: $lt_cv_prog_compiler_static_works_CXX" >&5
-$as_echo "$lt_cv_prog_compiler_static_works_CXX" >&6; }
-
-if test x"$lt_cv_prog_compiler_static_works_CXX" = xyes; then
- :
-else
- lt_prog_compiler_static_CXX=
-fi
-
-
-{ $as_echo "$as_me:$LINENO: checking if $compiler supports -c -o file.$ac_objext" >&5
-$as_echo_n "checking if $compiler supports -c -o file.$ac_objext... " >&6; }
-if test "${lt_cv_prog_compiler_c_o_CXX+set}" = set; then
- $as_echo_n "(cached) " >&6
-else
- lt_cv_prog_compiler_c_o_CXX=no
- $rm -r conftest 2>/dev/null
- mkdir conftest
- cd conftest
- mkdir out
- echo "$lt_simple_compile_test_code" > conftest.$ac_ext
-
- lt_compiler_flag="-o out/conftest2.$ac_objext"
- # Insert the option either (1) after the last *FLAGS variable, or
- # (2) before a word containing "conftest.", or (3) at the end.
- # Note that $ac_compile itself does not contain backslashes and begins
- # with a dollar sign (not a hyphen), so the echo should work correctly.
- lt_compile=`echo "$ac_compile" | $SED \
- -e 's:.*FLAGS}\{0,1\} :&$lt_compiler_flag :; t' \
- -e 's: [^ ]*conftest\.: $lt_compiler_flag&:; t' \
- -e 's:$: $lt_compiler_flag:'`
- (eval echo "\"\$as_me:15334: $lt_compile\"" >&5)
- (eval "$lt_compile" 2>out/conftest.err)
- ac_status=$?
- cat out/conftest.err >&5
- echo "$as_me:15338: \$? = $ac_status" >&5
- if (exit $ac_status) && test -s out/conftest2.$ac_objext
- then
- # The compiler can only warn and ignore the option if not recognized
- # So say no if there are warnings
- $echo "X$_lt_compiler_boilerplate" | $Xsed -e '/^$/d' > out/conftest.exp
- $SED '/^$/d; /^ *+/d' out/conftest.err >out/conftest.er2
- if test ! -s out/conftest.er2 || diff out/conftest.exp out/conftest.er2 >/dev/null; then
- lt_cv_prog_compiler_c_o_CXX=yes
- fi
- fi
- chmod u+w . 2>&5
- $rm conftest*
- # SGI C++ compiler will create directory out/ii_files/ for
- # template instantiation
- test -d out/ii_files && $rm out/ii_files/* && rmdir out/ii_files
- $rm out/* && rmdir out
- cd ..
- rmdir conftest
- $rm conftest*
-
-fi
-{ $as_echo "$as_me:$LINENO: result: $lt_cv_prog_compiler_c_o_CXX" >&5
-$as_echo "$lt_cv_prog_compiler_c_o_CXX" >&6; }
-
-
-hard_links="nottested"
-if test "$lt_cv_prog_compiler_c_o_CXX" = no && test "$need_locks" != no; then
- # do not overwrite the value of need_locks provided by the user
- { $as_echo "$as_me:$LINENO: checking if we can lock with hard links" >&5
-$as_echo_n "checking if we can lock with hard links... " >&6; }
- hard_links=yes
- $rm conftest*
- ln conftest.a conftest.b 2>/dev/null && hard_links=no
- touch conftest.a
- ln conftest.a conftest.b 2>&5 || hard_links=no
- ln conftest.a conftest.b 2>/dev/null && hard_links=no
- { $as_echo "$as_me:$LINENO: result: $hard_links" >&5
-$as_echo "$hard_links" >&6; }
- if test "$hard_links" = no; then
- { $as_echo "$as_me:$LINENO: WARNING: \`$CC' does not support \`-c -o', so \`make -j' may be unsafe" >&5
-$as_echo "$as_me: WARNING: \`$CC' does not support \`-c -o', so \`make -j' may be unsafe" >&2;}
- need_locks=warn
- fi
-else
- need_locks=no
-fi
-
-{ $as_echo "$as_me:$LINENO: checking whether the $compiler linker ($LD) supports shared libraries" >&5
-$as_echo_n "checking whether the $compiler linker ($LD) supports shared libraries... " >&6; }
-
- export_symbols_cmds_CXX='$NM $libobjs $convenience | $global_symbol_pipe | $SED '\''s/.* //'\'' | sort | uniq > $export_symbols'
- case $host_os in
- aix[4-9]*)
- # If we're using GNU nm, then we don't want the "-C" option.
- # -C means demangle to AIX nm, but means don't demangle with GNU nm
- if $NM -V 2>&1 | grep 'GNU' > /dev/null; then
- export_symbols_cmds_CXX='$NM -Bpg $libobjs $convenience | awk '\''{ if (((\$2 == "T") || (\$2 == "D") || (\$2 == "B")) && (substr(\$3,1,1) != ".")) { print \$3 } }'\'' | sort -u > $export_symbols'
- else
- export_symbols_cmds_CXX='$NM -BCpg $libobjs $convenience | awk '\''{ if (((\$2 == "T") || (\$2 == "D") || (\$2 == "B")) && (substr(\$3,1,1) != ".")) { print \$3 } }'\'' | sort -u > $export_symbols'
- fi
- ;;
- pw32*)
- export_symbols_cmds_CXX="$ltdll_cmds"
- ;;
- cygwin* | mingw*)
- export_symbols_cmds_CXX='$NM $libobjs $convenience | $global_symbol_pipe | $SED -e '\''/^[BCDGRS][ ]/s/.*[ ]\([^ ]*\)/\1 DATA/;/^.*[ ]__nm__/s/^.*[ ]__nm__\([^ ]*\)[ ][^ ]*/\1 DATA/;/^I[ ]/d;/^[AITW][ ]/s/.*[ ]//'\'' | sort | uniq > $export_symbols'
- ;;
- *)
- export_symbols_cmds_CXX='$NM $libobjs $convenience | $global_symbol_pipe | $SED '\''s/.* //'\'' | sort | uniq > $export_symbols'
- ;;
- esac
- exclude_expsyms_CXX='_GLOBAL_OFFSET_TABLE_|_GLOBAL__F[ID]_.*'
-
-{ $as_echo "$as_me:$LINENO: result: $ld_shlibs_CXX" >&5
-$as_echo "$ld_shlibs_CXX" >&6; }
-test "$ld_shlibs_CXX" = no && can_build_shared=no
-
-#
-# Do we need to explicitly link libc?
-#
-case "x$archive_cmds_need_lc_CXX" in
-x|xyes)
- # Assume -lc should be added
- archive_cmds_need_lc_CXX=yes
-
- if test "$enable_shared" = yes && test "$GCC" = yes; then
- case $archive_cmds_CXX in
- *'~'*)
- # FIXME: we may have to deal with multi-command sequences.
- ;;
- '$CC '*)
- # Test whether the compiler implicitly links with -lc since on some
- # systems, -lgcc has to come before -lc. If gcc already passes -lc
- # to ld, don't add -lc before -lgcc.
- { $as_echo "$as_me:$LINENO: checking whether -lc should be explicitly linked in" >&5
-$as_echo_n "checking whether -lc should be explicitly linked in... " >&6; }
- $rm conftest*
- echo "$lt_simple_compile_test_code" > conftest.$ac_ext
-
- if { (eval echo "$as_me:$LINENO: \"$ac_compile\"") >&5
- (eval $ac_compile) 2>&5
- ac_status=$?
- $as_echo "$as_me:$LINENO: \$? = $ac_status" >&5
- (exit $ac_status); } 2>conftest.err; then
- soname=conftest
- lib=conftest
- libobjs=conftest.$ac_objext
- deplibs=
- wl=$lt_prog_compiler_wl_CXX
- pic_flag=$lt_prog_compiler_pic_CXX
- compiler_flags=-v
- linker_flags=-v
- verstring=
- output_objdir=.
- libname=conftest
- lt_save_allow_undefined_flag=$allow_undefined_flag_CXX
- allow_undefined_flag_CXX=
- if { (eval echo "$as_me:$LINENO: \"$archive_cmds_CXX 2\>\&1 \| grep \" -lc \" \>/dev/null 2\>\&1\"") >&5
- (eval $archive_cmds_CXX 2\>\&1 \| grep \" -lc \" \>/dev/null 2\>\&1) 2>&5
- ac_status=$?
- $as_echo "$as_me:$LINENO: \$? = $ac_status" >&5
- (exit $ac_status); }
- then
- archive_cmds_need_lc_CXX=no
- else
- archive_cmds_need_lc_CXX=yes
- fi
- allow_undefined_flag_CXX=$lt_save_allow_undefined_flag
- else
- cat conftest.err 1>&5
- fi
- $rm conftest*
- { $as_echo "$as_me:$LINENO: result: $archive_cmds_need_lc_CXX" >&5
-$as_echo "$archive_cmds_need_lc_CXX" >&6; }
- ;;
- esac
- fi
- ;;
-esac
-
-{ $as_echo "$as_me:$LINENO: checking dynamic linker characteristics" >&5
-$as_echo_n "checking dynamic linker characteristics... " >&6; }
-library_names_spec=
-libname_spec='lib$name'
-soname_spec=
-shrext_cmds=".so"
-postinstall_cmds=
-postuninstall_cmds=
-finish_cmds=
-finish_eval=
-shlibpath_var=
-shlibpath_overrides_runpath=unknown
-version_type=none
-dynamic_linker="$host_os ld.so"
-sys_lib_dlsearch_path_spec="/lib /usr/lib"
-
-need_lib_prefix=unknown
-hardcode_into_libs=no
-
-# when you set need_version to no, make sure it does not cause -set_version
-# flags to be left without arguments
-need_version=unknown
-
-case $host_os in
-aix3*)
- version_type=linux
- library_names_spec='${libname}${release}${shared_ext}$versuffix $libname.a'
- shlibpath_var=LIBPATH
-
- # AIX 3 has no versioning support, so we append a major version to the name.
- soname_spec='${libname}${release}${shared_ext}$major'
- ;;
-
-aix[4-9]*)
- version_type=linux
- need_lib_prefix=no
- need_version=no
- hardcode_into_libs=yes
- if test "$host_cpu" = ia64; then
- # AIX 5 supports IA64
- library_names_spec='${libname}${release}${shared_ext}$major ${libname}${release}${shared_ext}$versuffix $libname${shared_ext}'
- shlibpath_var=LD_LIBRARY_PATH
- else
- # With GCC up to 2.95.x, collect2 would create an import file
- # for dependence libraries. The import file would start with
- # the line `#! .'. This would cause the generated library to
- # depend on `.', always an invalid library. This was fixed in
- # development snapshots of GCC prior to 3.0.
- case $host_os in
- aix4 | aix4.[01] | aix4.[01].*)
- if { echo '#if __GNUC__ > 2 || (__GNUC__ == 2 && __GNUC_MINOR__ >= 97)'
- echo ' yes '
- echo '#endif'; } | ${CC} -E - | grep yes > /dev/null; then
- :
- else
- can_build_shared=no
- fi
- ;;
- esac
- # AIX (on Power*) has no versioning support, so currently we can not hardcode correct
- # soname into executable. Probably we can add versioning support to
- # collect2, so additional links can be useful in future.
- if test "$aix_use_runtimelinking" = yes; then
- # If using run time linking (on AIX 4.2 or later) use lib<name>.so
- # instead of lib<name>.a to let people know that these are not
- # typical AIX shared libraries.
- library_names_spec='${libname}${release}${shared_ext}$versuffix ${libname}${release}${shared_ext}$major $libname${shared_ext}'
- else
- # We preserve .a as extension for shared libraries through AIX4.2
- # and later when we are not doing run time linking.
- library_names_spec='${libname}${release}.a $libname.a'
- soname_spec='${libname}${release}${shared_ext}$major'
- fi
- shlibpath_var=LIBPATH
- fi
- ;;
-
-amigaos*)
- library_names_spec='$libname.ixlibrary $libname.a'
- # Create ${libname}_ixlibrary.a entries in /sys/libs.
- finish_eval='for lib in `ls $libdir/*.ixlibrary 2>/dev/null`; do libname=`$echo "X$lib" | $Xsed -e '\''s%^.*/\([^/]*\)\.ixlibrary$%\1%'\''`; test $rm /sys/libs/${libname}_ixlibrary.a; $show "cd /sys/libs && $LN_S $lib ${libname}_ixlibrary.a"; cd /sys/libs && $LN_S $lib ${libname}_ixlibrary.a || exit 1; done'
- ;;
-
-beos*)
- library_names_spec='${libname}${shared_ext}'
- dynamic_linker="$host_os ld.so"
- shlibpath_var=LIBRARY_PATH
- ;;
-
-bsdi[45]*)
- version_type=linux
- need_version=no
- library_names_spec='${libname}${release}${shared_ext}$versuffix ${libname}${release}${shared_ext}$major $libname${shared_ext}'
- soname_spec='${libname}${release}${shared_ext}$major'
- finish_cmds='PATH="\$PATH:/sbin" ldconfig $libdir'
- shlibpath_var=LD_LIBRARY_PATH
- sys_lib_search_path_spec="/shlib /usr/lib /usr/X11/lib /usr/contrib/lib /lib /usr/local/lib"
- sys_lib_dlsearch_path_spec="/shlib /usr/lib /usr/local/lib"
- # the default ld.so.conf also contains /usr/contrib/lib and
- # /usr/X11R6/lib (/usr/X11 is a link to /usr/X11R6), but let us allow
- # libtool to hard-code these into programs
- ;;
-
-cygwin* | mingw* | pw32*)
- version_type=windows
- shrext_cmds=".dll"
- need_version=no
- need_lib_prefix=no
-
- case $GCC,$host_os in
- yes,cygwin* | yes,mingw* | yes,pw32*)
- library_names_spec='$libname.dll.a'
- # DLL is installed to $(libdir)/../bin by postinstall_cmds
- postinstall_cmds='base_file=`basename \${file}`~
- dlpath=`$SHELL 2>&1 -c '\''. $dir/'\''\${base_file}'\''i;echo \$dlname'\''`~
- dldir=$destdir/`dirname \$dlpath`~
- test -d \$dldir || mkdir -p \$dldir~
- $install_prog $dir/$dlname \$dldir/$dlname~
- chmod a+x \$dldir/$dlname'
- postuninstall_cmds='dldll=`$SHELL 2>&1 -c '\''. $file; echo \$dlname'\''`~
- dlpath=$dir/\$dldll~
- $rm \$dlpath'
- shlibpath_overrides_runpath=yes
-
- case $host_os in
- cygwin*)
- # Cygwin DLLs use 'cyg' prefix rather than 'lib'
- soname_spec='`echo ${libname} | sed -e 's/^lib/cyg/'``echo ${release} | $SED -e 's/[.]/-/g'`${versuffix}${shared_ext}'
- sys_lib_search_path_spec="/usr/lib /lib/w32api /lib /usr/local/lib"
- ;;
- mingw*)
- # MinGW DLLs use traditional 'lib' prefix
- soname_spec='${libname}`echo ${release} | $SED -e 's/[.]/-/g'`${versuffix}${shared_ext}'
- sys_lib_search_path_spec=`$CC -print-search-dirs | grep "^libraries:" | $SED -e "s/^libraries://" -e "s,=/,/,g"`
- if echo "$sys_lib_search_path_spec" | grep ';[c-zC-Z]:/' >/dev/null; then
- # It is most probably a Windows format PATH printed by
- # mingw gcc, but we are running on Cygwin. Gcc prints its search
- # path with ; separators, and with drive letters. We can handle the
- # drive letters (cygwin fileutils understands them), so leave them,
- # especially as we might pass files found there to a mingw objdump,
- # which wouldn't understand a cygwinified path. Ahh.
- sys_lib_search_path_spec=`echo "$sys_lib_search_path_spec" | $SED -e 's/;/ /g'`
- else
- sys_lib_search_path_spec=`echo "$sys_lib_search_path_spec" | $SED -e "s/$PATH_SEPARATOR/ /g"`
- fi
- ;;
- pw32*)
- # pw32 DLLs use 'pw' prefix rather than 'lib'
- library_names_spec='`echo ${libname} | sed -e 's/^lib/pw/'``echo ${release} | $SED -e 's/[.]/-/g'`${versuffix}${shared_ext}'
- ;;
- esac
- ;;
-
- *)
- library_names_spec='${libname}`echo ${release} | $SED -e 's/[.]/-/g'`${versuffix}${shared_ext} $libname.lib'
- ;;
- esac
- dynamic_linker='Win32 ld.exe'
- # FIXME: first we should search . and the directory the executable is in
- shlibpath_var=PATH
- ;;
-
-darwin* | rhapsody*)
- dynamic_linker="$host_os dyld"
- version_type=darwin
- need_lib_prefix=no
- need_version=no
- library_names_spec='${libname}${release}${versuffix}$shared_ext ${libname}${release}${major}$shared_ext ${libname}$shared_ext'
- soname_spec='${libname}${release}${major}$shared_ext'
- shlibpath_overrides_runpath=yes
- shlibpath_var=DYLD_LIBRARY_PATH
- shrext_cmds='`test .$module = .yes && echo .so || echo .dylib`'
-
- sys_lib_dlsearch_path_spec='/usr/local/lib /lib /usr/lib'
- ;;
-
-dgux*)
- version_type=linux
- need_lib_prefix=no
- need_version=no
- library_names_spec='${libname}${release}${shared_ext}$versuffix ${libname}${release}${shared_ext}$major $libname$shared_ext'
- soname_spec='${libname}${release}${shared_ext}$major'
- shlibpath_var=LD_LIBRARY_PATH
- ;;
-
-freebsd1*)
- dynamic_linker=no
- ;;
-
-freebsd* | dragonfly*)
- # DragonFly does not have aout. When/if they implement a new
- # versioning mechanism, adjust this.
- if test -x /usr/bin/objformat; then
- objformat=`/usr/bin/objformat`
- else
- case $host_os in
- freebsd[123]*) objformat=aout ;;
- *) objformat=elf ;;
- esac
- fi
- version_type=freebsd-$objformat
- case $version_type in
- freebsd-elf*)
- library_names_spec='${libname}${release}${shared_ext}$versuffix ${libname}${release}${shared_ext} $libname${shared_ext}'
- need_version=no
- need_lib_prefix=no
- ;;
- freebsd-*)
- library_names_spec='${libname}${release}${shared_ext}$versuffix $libname${shared_ext}$versuffix'
- need_version=yes
- ;;
- esac
- shlibpath_var=LD_LIBRARY_PATH
- case $host_os in
- freebsd2*)
- shlibpath_overrides_runpath=yes
- ;;
- freebsd3.[01]* | freebsdelf3.[01]*)
- shlibpath_overrides_runpath=yes
- hardcode_into_libs=yes
- ;;
- freebsd3.[2-9]* | freebsdelf3.[2-9]* | \
- freebsd4.[0-5] | freebsdelf4.[0-5] | freebsd4.1.1 | freebsdelf4.1.1)
- shlibpath_overrides_runpath=no
- hardcode_into_libs=yes
- ;;
- *) # from 4.6 on, and DragonFly
- shlibpath_overrides_runpath=yes
- hardcode_into_libs=yes
- ;;
- esac
- ;;
-
-gnu*)
- version_type=linux
- need_lib_prefix=no
- need_version=no
- library_names_spec='${libname}${release}${shared_ext}$versuffix ${libname}${release}${shared_ext}${major} ${libname}${shared_ext}'
- soname_spec='${libname}${release}${shared_ext}$major'
- shlibpath_var=LD_LIBRARY_PATH
- hardcode_into_libs=yes
- ;;
-
-hpux9* | hpux10* | hpux11*)
- # Give a soname corresponding to the major version so that dld.sl refuses to
- # link against other versions.
- version_type=sunos
- need_lib_prefix=no
- need_version=no
- case $host_cpu in
- ia64*)
- shrext_cmds='.so'
- hardcode_into_libs=yes
- dynamic_linker="$host_os dld.so"
- shlibpath_var=LD_LIBRARY_PATH
- shlibpath_overrides_runpath=yes # Unless +noenvvar is specified.
- library_names_spec='${libname}${release}${shared_ext}$versuffix ${libname}${release}${shared_ext}$major $libname${shared_ext}'
- soname_spec='${libname}${release}${shared_ext}$major'
- if test "X$HPUX_IA64_MODE" = X32; then
- sys_lib_search_path_spec="/usr/lib/hpux32 /usr/local/lib/hpux32 /usr/local/lib"
- else
- sys_lib_search_path_spec="/usr/lib/hpux64 /usr/local/lib/hpux64"
- fi
- sys_lib_dlsearch_path_spec=$sys_lib_search_path_spec
- ;;
- hppa*64*)
- shrext_cmds='.sl'
- hardcode_into_libs=yes
- dynamic_linker="$host_os dld.sl"
- shlibpath_var=LD_LIBRARY_PATH # How should we handle SHLIB_PATH
- shlibpath_overrides_runpath=yes # Unless +noenvvar is specified.
- library_names_spec='${libname}${release}${shared_ext}$versuffix ${libname}${release}${shared_ext}$major $libname${shared_ext}'
- soname_spec='${libname}${release}${shared_ext}$major'
- sys_lib_search_path_spec="/usr/lib/pa20_64 /usr/ccs/lib/pa20_64"
- sys_lib_dlsearch_path_spec=$sys_lib_search_path_spec
- ;;
- *)
- shrext_cmds='.sl'
- dynamic_linker="$host_os dld.sl"
- shlibpath_var=SHLIB_PATH
- shlibpath_overrides_runpath=no # +s is required to enable SHLIB_PATH
- library_names_spec='${libname}${release}${shared_ext}$versuffix ${libname}${release}${shared_ext}$major $libname${shared_ext}'
- soname_spec='${libname}${release}${shared_ext}$major'
- ;;
- esac
- # HP-UX runs *really* slowly unless shared libraries are mode 555.
- postinstall_cmds='chmod 555 $lib'
- ;;
-
-interix[3-9]*)
- version_type=linux
- need_lib_prefix=no
- need_version=no
- library_names_spec='${libname}${release}${shared_ext}$versuffix ${libname}${release}${shared_ext}$major ${libname}${shared_ext}'
- soname_spec='${libname}${release}${shared_ext}$major'
- dynamic_linker='Interix 3.x ld.so.1 (PE, like ELF)'
- shlibpath_var=LD_LIBRARY_PATH
- shlibpath_overrides_runpath=no
- hardcode_into_libs=yes
- ;;
-
-irix5* | irix6* | nonstopux*)
- case $host_os in
- nonstopux*) version_type=nonstopux ;;
- *)
- if test "$lt_cv_prog_gnu_ld" = yes; then
- version_type=linux
- else
- version_type=irix
- fi ;;
- esac
- need_lib_prefix=no
- need_version=no
- soname_spec='${libname}${release}${shared_ext}$major'
- library_names_spec='${libname}${release}${shared_ext}$versuffix ${libname}${release}${shared_ext}$major ${libname}${release}${shared_ext} $libname${shared_ext}'
- case $host_os in
- irix5* | nonstopux*)
- libsuff= shlibsuff=
- ;;
- *)
- case $LD in # libtool.m4 will add one of these switches to LD
- *-32|*"-32 "|*-melf32bsmip|*"-melf32bsmip ")
- libsuff= shlibsuff= libmagic=32-bit;;
- *-n32|*"-n32 "|*-melf32bmipn32|*"-melf32bmipn32 ")
- libsuff=32 shlibsuff=N32 libmagic=N32;;
- *-64|*"-64 "|*-melf64bmip|*"-melf64bmip ")
- libsuff=64 shlibsuff=64 libmagic=64-bit;;
- *) libsuff= shlibsuff= libmagic=never-match;;
- esac
- ;;
- esac
- shlibpath_var=LD_LIBRARY${shlibsuff}_PATH
- shlibpath_overrides_runpath=no
- sys_lib_search_path_spec="/usr/lib${libsuff} /lib${libsuff} /usr/local/lib${libsuff}"
- sys_lib_dlsearch_path_spec="/usr/lib${libsuff} /lib${libsuff}"
- hardcode_into_libs=yes
- ;;
-
-# No shared lib support for Linux oldld, aout, or coff.
-linux*oldld* | linux*aout* | linux*coff*)
- dynamic_linker=no
- ;;
-
-# This must be Linux ELF.
-linux* | k*bsd*-gnu)
- version_type=linux
- need_lib_prefix=no
- need_version=no
- library_names_spec='${libname}${release}${shared_ext}$versuffix ${libname}${release}${shared_ext}$major $libname${shared_ext}'
- soname_spec='${libname}${release}${shared_ext}$major'
- finish_cmds='PATH="\$PATH:/sbin" ldconfig -n $libdir'
- shlibpath_var=LD_LIBRARY_PATH
- shlibpath_overrides_runpath=no
- # This implies no fast_install, which is unacceptable.
- # Some rework will be needed to allow for fast_install
- # before this can be enabled.
- hardcode_into_libs=yes
-
- # Append ld.so.conf contents to the search path
- if test -f /etc/ld.so.conf; then
- lt_ld_extra=`awk '/^include / { system(sprintf("cd /etc; cat %s 2>/dev/null", \$2)); skip = 1; } { if (!skip) print \$0; skip = 0; }' < /etc/ld.so.conf | $SED -e 's/#.*//;/^[ ]*hwcap[ ]/d;s/[:, ]/ /g;s/=[^=]*$//;s/=[^= ]* / /g;/^$/d' | tr '\n' ' '`
- sys_lib_dlsearch_path_spec="/lib /usr/lib $lt_ld_extra"
- fi
-
- # We used to test for /lib/ld.so.1 and disable shared libraries on
- # powerpc, because MkLinux only supported shared libraries with the
- # GNU dynamic linker. Since this was broken with cross compilers,
- # most powerpc-linux boxes support dynamic linking these days and
- # people can always --disable-shared, the test was removed, and we
- # assume the GNU/Linux dynamic linker is in use.
- dynamic_linker='GNU/Linux ld.so'
- ;;
-
-netbsd*)
- version_type=sunos
- need_lib_prefix=no
- need_version=no
- if echo __ELF__ | $CC -E - | grep __ELF__ >/dev/null; then
- library_names_spec='${libname}${release}${shared_ext}$versuffix ${libname}${shared_ext}$versuffix'
- finish_cmds='PATH="\$PATH:/sbin" ldconfig -m $libdir'
- dynamic_linker='NetBSD (a.out) ld.so'
- else
- library_names_spec='${libname}${release}${shared_ext}$versuffix ${libname}${release}${shared_ext}$major ${libname}${shared_ext}'
- soname_spec='${libname}${release}${shared_ext}$major'
- dynamic_linker='NetBSD ld.elf_so'
- fi
- shlibpath_var=LD_LIBRARY_PATH
- shlibpath_overrides_runpath=yes
- hardcode_into_libs=yes
- ;;
-
-newsos6)
- version_type=linux
- library_names_spec='${libname}${release}${shared_ext}$versuffix ${libname}${release}${shared_ext}$major $libname${shared_ext}'
- shlibpath_var=LD_LIBRARY_PATH
- shlibpath_overrides_runpath=yes
- ;;
-
-nto-qnx*)
- version_type=linux
- need_lib_prefix=no
- need_version=no
- library_names_spec='${libname}${release}${shared_ext}$versuffix ${libname}${release}${shared_ext}$major $libname${shared_ext}'
- soname_spec='${libname}${release}${shared_ext}$major'
- shlibpath_var=LD_LIBRARY_PATH
- shlibpath_overrides_runpath=yes
- ;;
-
-openbsd*)
- version_type=sunos
- sys_lib_dlsearch_path_spec="/usr/lib"
- need_lib_prefix=no
- # Some older versions of OpenBSD (3.3 at least) *do* need versioned libs.
- case $host_os in
- openbsd3.3 | openbsd3.3.*) need_version=yes ;;
- *) need_version=no ;;
- esac
- library_names_spec='${libname}${release}${shared_ext}$versuffix ${libname}${shared_ext}$versuffix'
- finish_cmds='PATH="\$PATH:/sbin" ldconfig -m $libdir'
- shlibpath_var=LD_LIBRARY_PATH
- if test -z "`echo __ELF__ | $CC -E - | grep __ELF__`" || test "$host_os-$host_cpu" = "openbsd2.8-powerpc"; then
- case $host_os in
- openbsd2.[89] | openbsd2.[89].*)
- shlibpath_overrides_runpath=no
- ;;
- *)
- shlibpath_overrides_runpath=yes
- ;;
- esac
- else
- shlibpath_overrides_runpath=yes
- fi
- ;;
-
-os2*)
- libname_spec='$name'
- shrext_cmds=".dll"
- need_lib_prefix=no
- library_names_spec='$libname${shared_ext} $libname.a'
- dynamic_linker='OS/2 ld.exe'
- shlibpath_var=LIBPATH
- ;;
-
-osf3* | osf4* | osf5*)
- version_type=osf
- need_lib_prefix=no
- need_version=no
- soname_spec='${libname}${release}${shared_ext}$major'
- library_names_spec='${libname}${release}${shared_ext}$versuffix ${libname}${release}${shared_ext}$major $libname${shared_ext}'
- shlibpath_var=LD_LIBRARY_PATH
- sys_lib_search_path_spec="/usr/shlib /usr/ccs/lib /usr/lib/cmplrs/cc /usr/lib /usr/local/lib /var/shlib"
- sys_lib_dlsearch_path_spec="$sys_lib_search_path_spec"
- ;;
-
-rdos*)
- dynamic_linker=no
- ;;
-
-solaris*)
- version_type=linux
- need_lib_prefix=no
- need_version=no
- library_names_spec='${libname}${release}${shared_ext}$versuffix ${libname}${release}${shared_ext}$major $libname${shared_ext}'
- soname_spec='${libname}${release}${shared_ext}$major'
- shlibpath_var=LD_LIBRARY_PATH
- shlibpath_overrides_runpath=yes
- hardcode_into_libs=yes
- # ldd complains unless libraries are executable
- postinstall_cmds='chmod +x $lib'
- ;;
-
-sunos4*)
- version_type=sunos
- library_names_spec='${libname}${release}${shared_ext}$versuffix ${libname}${shared_ext}$versuffix'
- finish_cmds='PATH="\$PATH:/usr/etc" ldconfig $libdir'
- shlibpath_var=LD_LIBRARY_PATH
- shlibpath_overrides_runpath=yes
- if test "$with_gnu_ld" = yes; then
- need_lib_prefix=no
- fi
- need_version=yes
- ;;
-
-sysv4 | sysv4.3*)
- version_type=linux
- library_names_spec='${libname}${release}${shared_ext}$versuffix ${libname}${release}${shared_ext}$major $libname${shared_ext}'
- soname_spec='${libname}${release}${shared_ext}$major'
- shlibpath_var=LD_LIBRARY_PATH
- case $host_vendor in
- sni)
- shlibpath_overrides_runpath=no
- need_lib_prefix=no
- export_dynamic_flag_spec='${wl}-Blargedynsym'
- runpath_var=LD_RUN_PATH
- ;;
- siemens)
- need_lib_prefix=no
- ;;
- motorola)
- need_lib_prefix=no
- need_version=no
- shlibpath_overrides_runpath=no
- sys_lib_search_path_spec='/lib /usr/lib /usr/ccs/lib'
- ;;
- esac
- ;;
-
-sysv4*MP*)
- if test -d /usr/nec ;then
- version_type=linux
- library_names_spec='$libname${shared_ext}.$versuffix $libname${shared_ext}.$major $libname${shared_ext}'
- soname_spec='$libname${shared_ext}.$major'
- shlibpath_var=LD_LIBRARY_PATH
- fi
- ;;
-
-sysv5* | sco3.2v5* | sco5v6* | unixware* | OpenUNIX* | sysv4*uw2*)
- version_type=freebsd-elf
- need_lib_prefix=no
- need_version=no
- library_names_spec='${libname}${release}${shared_ext}$versuffix ${libname}${release}${shared_ext} $libname${shared_ext}'
- soname_spec='${libname}${release}${shared_ext}$major'
- shlibpath_var=LD_LIBRARY_PATH
- hardcode_into_libs=yes
- if test "$with_gnu_ld" = yes; then
- sys_lib_search_path_spec='/usr/local/lib /usr/gnu/lib /usr/ccs/lib /usr/lib /lib'
- shlibpath_overrides_runpath=no
- else
- sys_lib_search_path_spec='/usr/ccs/lib /usr/lib'
- shlibpath_overrides_runpath=yes
- case $host_os in
- sco3.2v5*)
- sys_lib_search_path_spec="$sys_lib_search_path_spec /lib"
- ;;
- esac
- fi
- sys_lib_dlsearch_path_spec='/usr/lib'
- ;;
-
-uts4*)
- version_type=linux
- library_names_spec='${libname}${release}${shared_ext}$versuffix ${libname}${release}${shared_ext}$major $libname${shared_ext}'
- soname_spec='${libname}${release}${shared_ext}$major'
- shlibpath_var=LD_LIBRARY_PATH
- ;;
-
-*)
- dynamic_linker=no
- ;;
-esac
-{ $as_echo "$as_me:$LINENO: result: $dynamic_linker" >&5
-$as_echo "$dynamic_linker" >&6; }
-test "$dynamic_linker" = no && can_build_shared=no
-
-if test "${lt_cv_sys_lib_search_path_spec+set}" = set; then
- $as_echo_n "(cached) " >&6
-else
- lt_cv_sys_lib_search_path_spec="$sys_lib_search_path_spec"
-fi
-
-sys_lib_search_path_spec="$lt_cv_sys_lib_search_path_spec"
-if test "${lt_cv_sys_lib_dlsearch_path_spec+set}" = set; then
- $as_echo_n "(cached) " >&6
-else
- lt_cv_sys_lib_dlsearch_path_spec="$sys_lib_dlsearch_path_spec"
-fi
-
-sys_lib_dlsearch_path_spec="$lt_cv_sys_lib_dlsearch_path_spec"
-
-variables_saved_for_relink="PATH $shlibpath_var $runpath_var"
-if test "$GCC" = yes; then
- variables_saved_for_relink="$variables_saved_for_relink GCC_EXEC_PREFIX COMPILER_PATH LIBRARY_PATH"
-fi
-
-{ $as_echo "$as_me:$LINENO: checking how to hardcode library paths into programs" >&5
-$as_echo_n "checking how to hardcode library paths into programs... " >&6; }
-hardcode_action_CXX=
-if test -n "$hardcode_libdir_flag_spec_CXX" || \
- test -n "$runpath_var_CXX" || \
- test "X$hardcode_automatic_CXX" = "Xyes" ; then
-
- # We can hardcode non-existant directories.
- if test "$hardcode_direct_CXX" != no &&
- # If the only mechanism to avoid hardcoding is shlibpath_var, we
- # have to relink, otherwise we might link with an installed library
- # when we should be linking with a yet-to-be-installed one
- ## test "$_LT_AC_TAGVAR(hardcode_shlibpath_var, CXX)" != no &&
- test "$hardcode_minus_L_CXX" != no; then
- # Linking always hardcodes the temporary library directory.
- hardcode_action_CXX=relink
- else
- # We can link without hardcoding, and we can hardcode nonexisting dirs.
- hardcode_action_CXX=immediate
- fi
-else
- # We cannot hardcode anything, or else we can only hardcode existing
- # directories.
- hardcode_action_CXX=unsupported
-fi
-{ $as_echo "$as_me:$LINENO: result: $hardcode_action_CXX" >&5
-$as_echo "$hardcode_action_CXX" >&6; }
-
-if test "$hardcode_action_CXX" = relink; then
- # Fast installation is not supported
- enable_fast_install=no
-elif test "$shlibpath_overrides_runpath" = yes ||
- test "$enable_shared" = no; then
- # Fast installation is not necessary
- enable_fast_install=needless
-fi
-
-
-# The else clause should only fire when bootstrapping the
-# libtool distribution, otherwise you forgot to ship ltmain.sh
-# with your package, and you will get complaints that there are
-# no rules to generate ltmain.sh.
-if test -f "$ltmain"; then
- # See if we are running on zsh, and set the options which allow our commands through
- # without removal of \ escapes.
- if test -n "${ZSH_VERSION+set}" ; then
- setopt NO_GLOB_SUBST
- fi
- # Now quote all the things that may contain metacharacters while being
- # careful not to overquote the AC_SUBSTed values. We take copies of the
- # variables and quote the copies for generation of the libtool script.
- for var in echo old_CC old_CFLAGS AR AR_FLAGS EGREP RANLIB LN_S LTCC LTCFLAGS NM \
- SED SHELL STRIP \
- libname_spec library_names_spec soname_spec extract_expsyms_cmds \
- old_striplib striplib file_magic_cmd finish_cmds finish_eval \
- deplibs_check_method reload_flag reload_cmds need_locks \
- lt_cv_sys_global_symbol_pipe lt_cv_sys_global_symbol_to_cdecl \
- lt_cv_sys_global_symbol_to_c_name_address \
- sys_lib_search_path_spec sys_lib_dlsearch_path_spec \
- old_postinstall_cmds old_postuninstall_cmds \
- compiler_CXX \
- CC_CXX \
- LD_CXX \
- lt_prog_compiler_wl_CXX \
- lt_prog_compiler_pic_CXX \
- lt_prog_compiler_static_CXX \
- lt_prog_compiler_no_builtin_flag_CXX \
- export_dynamic_flag_spec_CXX \
- thread_safe_flag_spec_CXX \
- whole_archive_flag_spec_CXX \
- enable_shared_with_static_runtimes_CXX \
- old_archive_cmds_CXX \
- old_archive_from_new_cmds_CXX \
- predep_objects_CXX \
- postdep_objects_CXX \
- predeps_CXX \
- postdeps_CXX \
- compiler_lib_search_path_CXX \
- compiler_lib_search_dirs_CXX \
- archive_cmds_CXX \
- archive_expsym_cmds_CXX \
- postinstall_cmds_CXX \
- postuninstall_cmds_CXX \
- old_archive_from_expsyms_cmds_CXX \
- allow_undefined_flag_CXX \
- no_undefined_flag_CXX \
- export_symbols_cmds_CXX \
- hardcode_libdir_flag_spec_CXX \
- hardcode_libdir_flag_spec_ld_CXX \
- hardcode_libdir_separator_CXX \
- hardcode_automatic_CXX \
- module_cmds_CXX \
- module_expsym_cmds_CXX \
- lt_cv_prog_compiler_c_o_CXX \
- fix_srcfile_path_CXX \
- exclude_expsyms_CXX \
- include_expsyms_CXX; do
-
- case $var in
- old_archive_cmds_CXX | \
- old_archive_from_new_cmds_CXX | \
- archive_cmds_CXX | \
- archive_expsym_cmds_CXX | \
- module_cmds_CXX | \
- module_expsym_cmds_CXX | \
- old_archive_from_expsyms_cmds_CXX | \
- export_symbols_cmds_CXX | \
- extract_expsyms_cmds | reload_cmds | finish_cmds | \
- postinstall_cmds | postuninstall_cmds | \
- old_postinstall_cmds | old_postuninstall_cmds | \
- sys_lib_search_path_spec | sys_lib_dlsearch_path_spec)
- # Double-quote double-evaled strings.
- eval "lt_$var=\\\"\`\$echo \"X\$$var\" | \$Xsed -e \"\$double_quote_subst\" -e \"\$sed_quote_subst\" -e \"\$delay_variable_subst\"\`\\\""
- ;;
- *)
- eval "lt_$var=\\\"\`\$echo \"X\$$var\" | \$Xsed -e \"\$sed_quote_subst\"\`\\\""
- ;;
- esac
- done
-
- case $lt_echo in
- *'\$0 --fallback-echo"')
- lt_echo=`$echo "X$lt_echo" | $Xsed -e 's/\\\\\\\$0 --fallback-echo"$/$0 --fallback-echo"/'`
- ;;
- esac
-
-cfgfile="$ofile"
-
- cat <<__EOF__ >> "$cfgfile"
-# ### BEGIN LIBTOOL TAG CONFIG: $tagname
-
-# Libtool was configured on host `(hostname || uname -n) 2>/dev/null | sed 1q`:
-
-# Shell to use when invoking shell scripts.
-SHELL=$lt_SHELL
-
-# Whether or not to build shared libraries.
-build_libtool_libs=$enable_shared
-
-# Whether or not to build static libraries.
-build_old_libs=$enable_static
-
-# Whether or not to add -lc for building shared libraries.
-build_libtool_need_lc=$archive_cmds_need_lc_CXX
-
-# Whether or not to disallow shared libs when runtime libs are static
-allow_libtool_libs_with_static_runtimes=$enable_shared_with_static_runtimes_CXX
-
-# Whether or not to optimize for fast installation.
-fast_install=$enable_fast_install
-
-# The host system.
-host_alias=$host_alias
-host=$host
-host_os=$host_os
-
-# The build system.
-build_alias=$build_alias
-build=$build
-build_os=$build_os
-
-# An echo program that does not interpret backslashes.
-echo=$lt_echo
-
-# The archiver.
-AR=$lt_AR
-AR_FLAGS=$lt_AR_FLAGS
-
-# A C compiler.
-LTCC=$lt_LTCC
-
-# LTCC compiler flags.
-LTCFLAGS=$lt_LTCFLAGS
-
-# A language-specific compiler.
-CC=$lt_compiler_CXX
-
-# Is the compiler the GNU C compiler?
-with_gcc=$GCC_CXX
-
-# An ERE matcher.
-EGREP=$lt_EGREP
-
-# The linker used to build libraries.
-LD=$lt_LD_CXX
-
-# Whether we need hard or soft links.
-LN_S=$lt_LN_S
-
-# A BSD-compatible nm program.
-NM=$lt_NM
-
-# A symbol stripping program
-STRIP=$lt_STRIP
-
-# Used to examine libraries when file_magic_cmd begins "file"
-MAGIC_CMD=$MAGIC_CMD
-
-# Used on cygwin: DLL creation program.
-DLLTOOL="$DLLTOOL"
-
-# Used on cygwin: object dumper.
-OBJDUMP="$OBJDUMP"
-
-# Used on cygwin: assembler.
-AS="$AS"
-
-# The name of the directory that contains temporary libtool files.
-objdir=$objdir
-
-# How to create reloadable object files.
-reload_flag=$lt_reload_flag
-reload_cmds=$lt_reload_cmds
-
-# How to pass a linker flag through the compiler.
-wl=$lt_lt_prog_compiler_wl_CXX
-
-# Object file suffix (normally "o").
-objext="$ac_objext"
-
-# Old archive suffix (normally "a").
-libext="$libext"
-
-# Shared library suffix (normally ".so").
-shrext_cmds='$shrext_cmds'
-
-# Executable file suffix (normally "").
-exeext="$exeext"
-
-# Additional compiler flags for building library objects.
-pic_flag=$lt_lt_prog_compiler_pic_CXX
-pic_mode=$pic_mode
-
-# What is the maximum length of a command?
-max_cmd_len=$lt_cv_sys_max_cmd_len
-
-# Does compiler simultaneously support -c and -o options?
-compiler_c_o=$lt_lt_cv_prog_compiler_c_o_CXX
-
-# Must we lock files when doing compilation?
-need_locks=$lt_need_locks
-
-# Do we need the lib prefix for modules?
-need_lib_prefix=$need_lib_prefix
-
-# Do we need a version for libraries?
-need_version=$need_version
-
-# Whether dlopen is supported.
-dlopen_support=$enable_dlopen
-
-# Whether dlopen of programs is supported.
-dlopen_self=$enable_dlopen_self
-
-# Whether dlopen of statically linked programs is supported.
-dlopen_self_static=$enable_dlopen_self_static
-
-# Compiler flag to prevent dynamic linking.
-link_static_flag=$lt_lt_prog_compiler_static_CXX
-
-# Compiler flag to turn off builtin functions.
-no_builtin_flag=$lt_lt_prog_compiler_no_builtin_flag_CXX
-
-# Compiler flag to allow reflexive dlopens.
-export_dynamic_flag_spec=$lt_export_dynamic_flag_spec_CXX
-
-# Compiler flag to generate shared objects directly from archives.
-whole_archive_flag_spec=$lt_whole_archive_flag_spec_CXX
-
-# Compiler flag to generate thread-safe objects.
-thread_safe_flag_spec=$lt_thread_safe_flag_spec_CXX
-
-# Library versioning type.
-version_type=$version_type
-
-# Format of library name prefix.
-libname_spec=$lt_libname_spec
-
-# List of archive names. First name is the real one, the rest are links.
-# The last name is the one that the linker finds with -lNAME.
-library_names_spec=$lt_library_names_spec
-
-# The coded name of the library, if different from the real name.
-soname_spec=$lt_soname_spec
-
-# Commands used to build and install an old-style archive.
-RANLIB=$lt_RANLIB
-old_archive_cmds=$lt_old_archive_cmds_CXX
-old_postinstall_cmds=$lt_old_postinstall_cmds
-old_postuninstall_cmds=$lt_old_postuninstall_cmds
-
-# Create an old-style archive from a shared archive.
-old_archive_from_new_cmds=$lt_old_archive_from_new_cmds_CXX
-
-# Create a temporary old-style archive to link instead of a shared archive.
-old_archive_from_expsyms_cmds=$lt_old_archive_from_expsyms_cmds_CXX
-
-# Commands used to build and install a shared archive.
-archive_cmds=$lt_archive_cmds_CXX
-archive_expsym_cmds=$lt_archive_expsym_cmds_CXX
-postinstall_cmds=$lt_postinstall_cmds
-postuninstall_cmds=$lt_postuninstall_cmds
-
-# Commands used to build a loadable module (assumed same as above if empty)
-module_cmds=$lt_module_cmds_CXX
-module_expsym_cmds=$lt_module_expsym_cmds_CXX
-
-# Commands to strip libraries.
-old_striplib=$lt_old_striplib
-striplib=$lt_striplib
-
-# Dependencies to place before the objects being linked to create a
-# shared library.
-predep_objects=$lt_predep_objects_CXX
-
-# Dependencies to place after the objects being linked to create a
-# shared library.
-postdep_objects=$lt_postdep_objects_CXX
-
-# Dependencies to place before the objects being linked to create a
-# shared library.
-predeps=$lt_predeps_CXX
-
-# Dependencies to place after the objects being linked to create a
-# shared library.
-postdeps=$lt_postdeps_CXX
-
-# The directories searched by this compiler when creating a shared
-# library
-compiler_lib_search_dirs=$lt_compiler_lib_search_dirs_CXX
-
-# The library search path used internally by the compiler when linking
-# a shared library.
-compiler_lib_search_path=$lt_compiler_lib_search_path_CXX
-
-# Method to check whether dependent libraries are shared objects.
-deplibs_check_method=$lt_deplibs_check_method
-
-# Command to use when deplibs_check_method == file_magic.
-file_magic_cmd=$lt_file_magic_cmd
-
-# Flag that allows shared libraries with undefined symbols to be built.
-allow_undefined_flag=$lt_allow_undefined_flag_CXX
-
-# Flag that forces no undefined symbols.
-no_undefined_flag=$lt_no_undefined_flag_CXX
-
-# Commands used to finish a libtool library installation in a directory.
-finish_cmds=$lt_finish_cmds
-
-# Same as above, but a single script fragment to be evaled but not shown.
-finish_eval=$lt_finish_eval
-
-# Take the output of nm and produce a listing of raw symbols and C names.
-global_symbol_pipe=$lt_lt_cv_sys_global_symbol_pipe
-
-# Transform the output of nm in a proper C declaration
-global_symbol_to_cdecl=$lt_lt_cv_sys_global_symbol_to_cdecl
-
-# Transform the output of nm in a C name address pair
-global_symbol_to_c_name_address=$lt_lt_cv_sys_global_symbol_to_c_name_address
-
-# This is the shared library runtime path variable.
-runpath_var=$runpath_var
-
-# This is the shared library path variable.
-shlibpath_var=$shlibpath_var
-
-# Is shlibpath searched before the hard-coded library search path?
-shlibpath_overrides_runpath=$shlibpath_overrides_runpath
-
-# How to hardcode a shared library path into an executable.
-hardcode_action=$hardcode_action_CXX
-
-# Whether we should hardcode library paths into libraries.
-hardcode_into_libs=$hardcode_into_libs
-
-# Flag to hardcode \$libdir into a binary during linking.
-# This must work even if \$libdir does not exist.
-hardcode_libdir_flag_spec=$lt_hardcode_libdir_flag_spec_CXX
-
-# If ld is used when linking, flag to hardcode \$libdir into
-# a binary during linking. This must work even if \$libdir does
-# not exist.
-hardcode_libdir_flag_spec_ld=$lt_hardcode_libdir_flag_spec_ld_CXX
-
-# Whether we need a single -rpath flag with a separated argument.
-hardcode_libdir_separator=$lt_hardcode_libdir_separator_CXX
-
-# Set to yes if using DIR/libNAME${shared_ext} during linking hardcodes DIR into the
-# resulting binary.
-hardcode_direct=$hardcode_direct_CXX
-
-# Set to yes if using the -LDIR flag during linking hardcodes DIR into the
-# resulting binary.
-hardcode_minus_L=$hardcode_minus_L_CXX
-
-# Set to yes if using SHLIBPATH_VAR=DIR during linking hardcodes DIR into
-# the resulting binary.
-hardcode_shlibpath_var=$hardcode_shlibpath_var_CXX
-
-# Set to yes if building a shared library automatically hardcodes DIR into the library
-# and all subsequent libraries and executables linked against it.
-hardcode_automatic=$hardcode_automatic_CXX
-
-# Variables whose values should be saved in libtool wrapper scripts and
-# restored at relink time.
-variables_saved_for_relink="$variables_saved_for_relink"
-
-# Whether libtool must link a program against all its dependency libraries.
-link_all_deplibs=$link_all_deplibs_CXX
-
-# Compile-time system search path for libraries
-sys_lib_search_path_spec=$lt_sys_lib_search_path_spec
-
-# Run-time system search path for libraries
-sys_lib_dlsearch_path_spec=$lt_sys_lib_dlsearch_path_spec
-
-# Fix the shell variable \$srcfile for the compiler.
-fix_srcfile_path=$lt_fix_srcfile_path
-
-# Set to yes if exported symbols are required.
-always_export_symbols=$always_export_symbols_CXX
-
-# The commands to list exported symbols.
-export_symbols_cmds=$lt_export_symbols_cmds_CXX
-
-# The commands to extract the exported symbol list from a shared archive.
-extract_expsyms_cmds=$lt_extract_expsyms_cmds
-
-# Symbols that should not be listed in the preloaded symbols.
-exclude_expsyms=$lt_exclude_expsyms_CXX
-
-# Symbols that must always be exported.
-include_expsyms=$lt_include_expsyms_CXX
-
-# ### END LIBTOOL TAG CONFIG: $tagname
-
-__EOF__
-
-
-else
- # If there is no Makefile yet, we rely on a make rule to execute
- # `config.status --recheck' to rerun these tests and create the
- # libtool script then.
- ltmain_in=`echo $ltmain | sed -e 's/\.sh$/.in/'`
- if test -f "$ltmain_in"; then
- test -f Makefile && make "$ltmain"
- fi
-fi
-
-
-ac_ext=c
-ac_cpp='$CPP $CPPFLAGS'
-ac_compile='$CC -c $CFLAGS $CPPFLAGS conftest.$ac_ext >&5'
-ac_link='$CC -o conftest$ac_exeext $CFLAGS $CPPFLAGS $LDFLAGS conftest.$ac_ext $LIBS >&5'
-ac_compiler_gnu=$ac_cv_c_compiler_gnu
-
-CC=$lt_save_CC
-LDCXX=$LD
-LD=$lt_save_LD
-GCC=$lt_save_GCC
-with_gnu_ldcxx=$with_gnu_ld
-with_gnu_ld=$lt_save_with_gnu_ld
-lt_cv_path_LDCXX=$lt_cv_path_LD
-lt_cv_path_LD=$lt_save_path_LD
-lt_cv_prog_gnu_ldcxx=$lt_cv_prog_gnu_ld
-lt_cv_prog_gnu_ld=$lt_save_with_gnu_ld
-
- else
- tagname=""
- fi
- ;;
-
- F77)
- if test -n "$F77" && test "X$F77" != "Xno"; then
-
-ac_ext=f
-ac_compile='$F77 -c $FFLAGS conftest.$ac_ext >&5'
-ac_link='$F77 -o conftest$ac_exeext $FFLAGS $LDFLAGS conftest.$ac_ext $LIBS >&5'
-ac_compiler_gnu=$ac_cv_f77_compiler_gnu
-
-
-archive_cmds_need_lc_F77=no
-allow_undefined_flag_F77=
-always_export_symbols_F77=no
-archive_expsym_cmds_F77=
-export_dynamic_flag_spec_F77=
-hardcode_direct_F77=no
-hardcode_libdir_flag_spec_F77=
-hardcode_libdir_flag_spec_ld_F77=
-hardcode_libdir_separator_F77=
-hardcode_minus_L_F77=no
-hardcode_automatic_F77=no
-module_cmds_F77=
-module_expsym_cmds_F77=
-link_all_deplibs_F77=unknown
-old_archive_cmds_F77=$old_archive_cmds
-no_undefined_flag_F77=
-whole_archive_flag_spec_F77=
-enable_shared_with_static_runtimes_F77=no
-
-# Source file extension for f77 test sources.
-ac_ext=f
-
-# Object file extension for compiled f77 test sources.
-objext=o
-objext_F77=$objext
-
-# Code to be used in simple compile tests
-lt_simple_compile_test_code="\
- subroutine t
- return
- end
-"
-
-# Code to be used in simple link tests
-lt_simple_link_test_code="\
- program t
- end
-"
-
-# ltmain only uses $CC for tagged configurations so make sure $CC is set.
-
-# If no C compiler was specified, use CC.
-LTCC=${LTCC-"$CC"}
-
-# If no C compiler flags were specified, use CFLAGS.
-LTCFLAGS=${LTCFLAGS-"$CFLAGS"}
-
-# Allow CC to be a program name with arguments.
-compiler=$CC
-
-
-# save warnings/boilerplate of simple test code
-ac_outfile=conftest.$ac_objext
-echo "$lt_simple_compile_test_code" >conftest.$ac_ext
-eval "$ac_compile" 2>&1 >/dev/null | $SED '/^$/d; /^ *+/d' >conftest.err
-_lt_compiler_boilerplate=`cat conftest.err`
-$rm conftest*
-
-ac_outfile=conftest.$ac_objext
-echo "$lt_simple_link_test_code" >conftest.$ac_ext
-eval "$ac_link" 2>&1 >/dev/null | $SED '/^$/d; /^ *+/d' >conftest.err
-_lt_linker_boilerplate=`cat conftest.err`
-$rm -r conftest*
-
-
-# Allow CC to be a program name with arguments.
-lt_save_CC="$CC"
-CC=${F77-"f77"}
-compiler=$CC
-compiler_F77=$CC
-for cc_temp in $compiler""; do
- case $cc_temp in
- compile | *[\\/]compile | ccache | *[\\/]ccache ) ;;
- distcc | *[\\/]distcc | purify | *[\\/]purify ) ;;
- \-*) ;;
- *) break;;
- esac
-done
-cc_basename=`$echo "X$cc_temp" | $Xsed -e 's%.*/%%' -e "s%^$host_alias-%%"`
-
-
-{ $as_echo "$as_me:$LINENO: checking if libtool supports shared libraries" >&5
-$as_echo_n "checking if libtool supports shared libraries... " >&6; }
-{ $as_echo "$as_me:$LINENO: result: $can_build_shared" >&5
-$as_echo "$can_build_shared" >&6; }
-
-{ $as_echo "$as_me:$LINENO: checking whether to build shared libraries" >&5
-$as_echo_n "checking whether to build shared libraries... " >&6; }
-test "$can_build_shared" = "no" && enable_shared=no
-
-# On AIX, shared libraries and static libraries use the same namespace, and
-# are all built from PIC.
-case $host_os in
-aix3*)
- test "$enable_shared" = yes && enable_static=no
- if test -n "$RANLIB"; then
- archive_cmds="$archive_cmds~\$RANLIB \$lib"
- postinstall_cmds='$RANLIB $lib'
- fi
- ;;
-aix[4-9]*)
- if test "$host_cpu" != ia64 && test "$aix_use_runtimelinking" = no ; then
- test "$enable_shared" = yes && enable_static=no
- fi
- ;;
-esac
-{ $as_echo "$as_me:$LINENO: result: $enable_shared" >&5
-$as_echo "$enable_shared" >&6; }
-
-{ $as_echo "$as_me:$LINENO: checking whether to build static libraries" >&5
-$as_echo_n "checking whether to build static libraries... " >&6; }
-# Make sure either enable_shared or enable_static is yes.
-test "$enable_shared" = yes || enable_static=yes
-{ $as_echo "$as_me:$LINENO: result: $enable_static" >&5
-$as_echo "$enable_static" >&6; }
-
-GCC_F77="$G77"
-LD_F77="$LD"
-
-lt_prog_compiler_wl_F77=
-lt_prog_compiler_pic_F77=
-lt_prog_compiler_static_F77=
-
-{ $as_echo "$as_me:$LINENO: checking for $compiler option to produce PIC" >&5
-$as_echo_n "checking for $compiler option to produce PIC... " >&6; }
-
- if test "$GCC" = yes; then
- lt_prog_compiler_wl_F77='-Wl,'
- lt_prog_compiler_static_F77='-static'
-
- case $host_os in
- aix*)
- # All AIX code is PIC.
- if test "$host_cpu" = ia64; then
- # AIX 5 now supports IA64 processor
- lt_prog_compiler_static_F77='-Bstatic'
- fi
- ;;
-
- amigaos*)
- # FIXME: we need at least 68020 code to build shared libraries, but
- # adding the `-m68020' flag to GCC prevents building anything better,
- # like `-m68040'.
- lt_prog_compiler_pic_F77='-m68020 -resident32 -malways-restore-a4'
- ;;
-
- beos* | irix5* | irix6* | nonstopux* | osf3* | osf4* | osf5*)
- # PIC is the default for these OSes.
- ;;
-
- mingw* | cygwin* | pw32* | os2*)
- # This hack is so that the source file can tell whether it is being
- # built for inclusion in a dll (and should export symbols for example).
- # Although the cygwin gcc ignores -fPIC, still need this for old-style
- # (--disable-auto-import) libraries
- lt_prog_compiler_pic_F77='-DDLL_EXPORT'
- ;;
-
- darwin* | rhapsody*)
- # PIC is the default on this platform
- # Common symbols not allowed in MH_DYLIB files
- lt_prog_compiler_pic_F77='-fno-common'
- ;;
-
- interix[3-9]*)
- # Interix 3.x gcc -fpic/-fPIC options generate broken code.
- # Instead, we relocate shared libraries at runtime.
- ;;
-
- msdosdjgpp*)
- # Just because we use GCC doesn't mean we suddenly get shared libraries
- # on systems that don't support them.
- lt_prog_compiler_can_build_shared_F77=no
- enable_shared=no
- ;;
-
- sysv4*MP*)
- if test -d /usr/nec; then
- lt_prog_compiler_pic_F77=-Kconform_pic
- fi
- ;;
-
- hpux*)
- # PIC is the default for IA64 HP-UX and 64-bit HP-UX, but
- # not for PA HP-UX.
- case $host_cpu in
- hppa*64*|ia64*)
- # +Z the default
- ;;
- *)
- lt_prog_compiler_pic_F77='-fPIC'
- ;;
- esac
- ;;
-
- *)
- lt_prog_compiler_pic_F77='-fPIC'
- ;;
- esac
- else
- # PORTME Check for flag to pass linker flags through the system compiler.
- case $host_os in
- aix*)
- lt_prog_compiler_wl_F77='-Wl,'
- if test "$host_cpu" = ia64; then
- # AIX 5 now supports IA64 processor
- lt_prog_compiler_static_F77='-Bstatic'
- else
- lt_prog_compiler_static_F77='-bnso -bI:/lib/syscalls.exp'
- fi
- ;;
- darwin*)
- # PIC is the default on this platform
- # Common symbols not allowed in MH_DYLIB files
- case $cc_basename in
- xlc*)
- lt_prog_compiler_pic_F77='-qnocommon'
- lt_prog_compiler_wl_F77='-Wl,'
- ;;
- esac
- ;;
-
- mingw* | cygwin* | pw32* | os2*)
- # This hack is so that the source file can tell whether it is being
- # built for inclusion in a dll (and should export symbols for example).
- lt_prog_compiler_pic_F77='-DDLL_EXPORT'
- ;;
-
- hpux9* | hpux10* | hpux11*)
- lt_prog_compiler_wl_F77='-Wl,'
- # PIC is the default for IA64 HP-UX and 64-bit HP-UX, but
- # not for PA HP-UX.
- case $host_cpu in
- hppa*64*|ia64*)
- # +Z the default
- ;;
- *)
- lt_prog_compiler_pic_F77='+Z'
- ;;
- esac
- # Is there a better lt_prog_compiler_static that works with the bundled CC?
- lt_prog_compiler_static_F77='${wl}-a ${wl}archive'
- ;;
-
- irix5* | irix6* | nonstopux*)
- lt_prog_compiler_wl_F77='-Wl,'
- # PIC (with -KPIC) is the default.
- lt_prog_compiler_static_F77='-non_shared'
- ;;
-
- newsos6)
- lt_prog_compiler_pic_F77='-KPIC'
- lt_prog_compiler_static_F77='-Bstatic'
- ;;
-
- linux* | k*bsd*-gnu)
- case $cc_basename in
- icc* | ecc*)
- lt_prog_compiler_wl_F77='-Wl,'
- lt_prog_compiler_pic_F77='-KPIC'
- lt_prog_compiler_static_F77='-static'
- ;;
- pgcc* | pgf77* | pgf90* | pgf95*)
- # Portland Group compilers (*not* the Pentium gcc compiler,
- # which looks to be a dead project)
- lt_prog_compiler_wl_F77='-Wl,'
- lt_prog_compiler_pic_F77='-fpic'
- lt_prog_compiler_static_F77='-Bstatic'
- ;;
- ccc*)
- lt_prog_compiler_wl_F77='-Wl,'
- # All Alpha code is PIC.
- lt_prog_compiler_static_F77='-non_shared'
- ;;
- *)
- case `$CC -V 2>&1 | sed 5q` in
- *Sun\ C*)
- # Sun C 5.9
- lt_prog_compiler_pic_F77='-KPIC'
- lt_prog_compiler_static_F77='-Bstatic'
- lt_prog_compiler_wl_F77='-Wl,'
- ;;
- *Sun\ F*)
- # Sun Fortran 8.3 passes all unrecognized flags to the linker
- lt_prog_compiler_pic_F77='-KPIC'
- lt_prog_compiler_static_F77='-Bstatic'
- lt_prog_compiler_wl_F77=''
- ;;
- esac
- ;;
- esac
- ;;
-
- osf3* | osf4* | osf5*)
- lt_prog_compiler_wl_F77='-Wl,'
- # All OSF/1 code is PIC.
- lt_prog_compiler_static_F77='-non_shared'
- ;;
-
- rdos*)
- lt_prog_compiler_static_F77='-non_shared'
- ;;
-
- solaris*)
- lt_prog_compiler_pic_F77='-KPIC'
- lt_prog_compiler_static_F77='-Bstatic'
- case $cc_basename in
- f77* | f90* | f95*)
- lt_prog_compiler_wl_F77='-Qoption ld ';;
- *)
- lt_prog_compiler_wl_F77='-Wl,';;
- esac
- ;;
-
- sunos4*)
- lt_prog_compiler_wl_F77='-Qoption ld '
- lt_prog_compiler_pic_F77='-PIC'
- lt_prog_compiler_static_F77='-Bstatic'
- ;;
-
- sysv4 | sysv4.2uw2* | sysv4.3*)
- lt_prog_compiler_wl_F77='-Wl,'
- lt_prog_compiler_pic_F77='-KPIC'
- lt_prog_compiler_static_F77='-Bstatic'
- ;;
-
- sysv4*MP*)
- if test -d /usr/nec ;then
- lt_prog_compiler_pic_F77='-Kconform_pic'
- lt_prog_compiler_static_F77='-Bstatic'
- fi
- ;;
-
- sysv5* | unixware* | sco3.2v5* | sco5v6* | OpenUNIX*)
- lt_prog_compiler_wl_F77='-Wl,'
- lt_prog_compiler_pic_F77='-KPIC'
- lt_prog_compiler_static_F77='-Bstatic'
- ;;
-
- unicos*)
- lt_prog_compiler_wl_F77='-Wl,'
- lt_prog_compiler_can_build_shared_F77=no
- ;;
-
- uts4*)
- lt_prog_compiler_pic_F77='-pic'
- lt_prog_compiler_static_F77='-Bstatic'
- ;;
-
- *)
- lt_prog_compiler_can_build_shared_F77=no
- ;;
- esac
- fi
-
-{ $as_echo "$as_me:$LINENO: result: $lt_prog_compiler_pic_F77" >&5
-$as_echo "$lt_prog_compiler_pic_F77" >&6; }
-
-#
-# Check to make sure the PIC flag actually works.
-#
-if test -n "$lt_prog_compiler_pic_F77"; then
-
-{ $as_echo "$as_me:$LINENO: checking if $compiler PIC flag $lt_prog_compiler_pic_F77 works" >&5
-$as_echo_n "checking if $compiler PIC flag $lt_prog_compiler_pic_F77 works... " >&6; }
-if test "${lt_cv_prog_compiler_pic_works_F77+set}" = set; then
- $as_echo_n "(cached) " >&6
-else
- lt_cv_prog_compiler_pic_works_F77=no
- ac_outfile=conftest.$ac_objext
- echo "$lt_simple_compile_test_code" > conftest.$ac_ext
- lt_compiler_flag="$lt_prog_compiler_pic_F77"
- # Insert the option either (1) after the last *FLAGS variable, or
- # (2) before a word containing "conftest.", or (3) at the end.
- # Note that $ac_compile itself does not contain backslashes and begins
- # with a dollar sign (not a hyphen), so the echo should work correctly.
- # The option is referenced via a variable to avoid confusing sed.
- lt_compile=`echo "$ac_compile" | $SED \
- -e 's:.*FLAGS}\{0,1\} :&$lt_compiler_flag :; t' \
- -e 's: [^ ]*conftest\.: $lt_compiler_flag&:; t' \
- -e 's:$: $lt_compiler_flag:'`
- (eval echo "\"\$as_me:16917: $lt_compile\"" >&5)
- (eval "$lt_compile" 2>conftest.err)
- ac_status=$?
- cat conftest.err >&5
- echo "$as_me:16921: \$? = $ac_status" >&5
- if (exit $ac_status) && test -s "$ac_outfile"; then
- # The compiler can only warn and ignore the option if not recognized
- # So say no if there are warnings other than the usual output.
- $echo "X$_lt_compiler_boilerplate" | $Xsed -e '/^$/d' >conftest.exp
- $SED '/^$/d; /^ *+/d' conftest.err >conftest.er2
- if test ! -s conftest.er2 || diff conftest.exp conftest.er2 >/dev/null; then
- lt_cv_prog_compiler_pic_works_F77=yes
- fi
- fi
- $rm conftest*
-
-fi
-{ $as_echo "$as_me:$LINENO: result: $lt_cv_prog_compiler_pic_works_F77" >&5
-$as_echo "$lt_cv_prog_compiler_pic_works_F77" >&6; }
-
-if test x"$lt_cv_prog_compiler_pic_works_F77" = xyes; then
- case $lt_prog_compiler_pic_F77 in
- "" | " "*) ;;
- *) lt_prog_compiler_pic_F77=" $lt_prog_compiler_pic_F77" ;;
- esac
-else
- lt_prog_compiler_pic_F77=
- lt_prog_compiler_can_build_shared_F77=no
-fi
-
-fi
-case $host_os in
- # For platforms which do not support PIC, -DPIC is meaningless:
- *djgpp*)
- lt_prog_compiler_pic_F77=
- ;;
- *)
- lt_prog_compiler_pic_F77="$lt_prog_compiler_pic_F77"
- ;;
-esac
-
-#
-# Check to make sure the static flag actually works.
-#
-wl=$lt_prog_compiler_wl_F77 eval lt_tmp_static_flag=\"$lt_prog_compiler_static_F77\"
-{ $as_echo "$as_me:$LINENO: checking if $compiler static flag $lt_tmp_static_flag works" >&5
-$as_echo_n "checking if $compiler static flag $lt_tmp_static_flag works... " >&6; }
-if test "${lt_cv_prog_compiler_static_works_F77+set}" = set; then
- $as_echo_n "(cached) " >&6
-else
- lt_cv_prog_compiler_static_works_F77=no
- save_LDFLAGS="$LDFLAGS"
- LDFLAGS="$LDFLAGS $lt_tmp_static_flag"
- echo "$lt_simple_link_test_code" > conftest.$ac_ext
- if (eval $ac_link 2>conftest.err) && test -s conftest$ac_exeext; then
- # The linker can only warn and ignore the option if not recognized
- # So say no if there are warnings
- if test -s conftest.err; then
- # Append any errors to the config.log.
- cat conftest.err 1>&5
- $echo "X$_lt_linker_boilerplate" | $Xsed -e '/^$/d' > conftest.exp
- $SED '/^$/d; /^ *+/d' conftest.err >conftest.er2
- if diff conftest.exp conftest.er2 >/dev/null; then
- lt_cv_prog_compiler_static_works_F77=yes
- fi
- else
- lt_cv_prog_compiler_static_works_F77=yes
- fi
- fi
- $rm -r conftest*
- LDFLAGS="$save_LDFLAGS"
-
-fi
-{ $as_echo "$as_me:$LINENO: result: $lt_cv_prog_compiler_static_works_F77" >&5
-$as_echo "$lt_cv_prog_compiler_static_works_F77" >&6; }
-
-if test x"$lt_cv_prog_compiler_static_works_F77" = xyes; then
- :
-else
- lt_prog_compiler_static_F77=
-fi
-
-
-{ $as_echo "$as_me:$LINENO: checking if $compiler supports -c -o file.$ac_objext" >&5
-$as_echo_n "checking if $compiler supports -c -o file.$ac_objext... " >&6; }
-if test "${lt_cv_prog_compiler_c_o_F77+set}" = set; then
- $as_echo_n "(cached) " >&6
-else
- lt_cv_prog_compiler_c_o_F77=no
- $rm -r conftest 2>/dev/null
- mkdir conftest
- cd conftest
- mkdir out
- echo "$lt_simple_compile_test_code" > conftest.$ac_ext
-
- lt_compiler_flag="-o out/conftest2.$ac_objext"
- # Insert the option either (1) after the last *FLAGS variable, or
- # (2) before a word containing "conftest.", or (3) at the end.
- # Note that $ac_compile itself does not contain backslashes and begins
- # with a dollar sign (not a hyphen), so the echo should work correctly.
- lt_compile=`echo "$ac_compile" | $SED \
- -e 's:.*FLAGS}\{0,1\} :&$lt_compiler_flag :; t' \
- -e 's: [^ ]*conftest\.: $lt_compiler_flag&:; t' \
- -e 's:$: $lt_compiler_flag:'`
- (eval echo "\"\$as_me:17021: $lt_compile\"" >&5)
- (eval "$lt_compile" 2>out/conftest.err)
- ac_status=$?
- cat out/conftest.err >&5
- echo "$as_me:17025: \$? = $ac_status" >&5
- if (exit $ac_status) && test -s out/conftest2.$ac_objext
- then
- # The compiler can only warn and ignore the option if not recognized
- # So say no if there are warnings
- $echo "X$_lt_compiler_boilerplate" | $Xsed -e '/^$/d' > out/conftest.exp
- $SED '/^$/d; /^ *+/d' out/conftest.err >out/conftest.er2
- if test ! -s out/conftest.er2 || diff out/conftest.exp out/conftest.er2 >/dev/null; then
- lt_cv_prog_compiler_c_o_F77=yes
- fi
- fi
- chmod u+w . 2>&5
- $rm conftest*
- # SGI C++ compiler will create directory out/ii_files/ for
- # template instantiation
- test -d out/ii_files && $rm out/ii_files/* && rmdir out/ii_files
- $rm out/* && rmdir out
- cd ..
- rmdir conftest
- $rm conftest*
-
-fi
-{ $as_echo "$as_me:$LINENO: result: $lt_cv_prog_compiler_c_o_F77" >&5
-$as_echo "$lt_cv_prog_compiler_c_o_F77" >&6; }
-
-
-hard_links="nottested"
-if test "$lt_cv_prog_compiler_c_o_F77" = no && test "$need_locks" != no; then
- # do not overwrite the value of need_locks provided by the user
- { $as_echo "$as_me:$LINENO: checking if we can lock with hard links" >&5
-$as_echo_n "checking if we can lock with hard links... " >&6; }
- hard_links=yes
- $rm conftest*
- ln conftest.a conftest.b 2>/dev/null && hard_links=no
- touch conftest.a
- ln conftest.a conftest.b 2>&5 || hard_links=no
- ln conftest.a conftest.b 2>/dev/null && hard_links=no
- { $as_echo "$as_me:$LINENO: result: $hard_links" >&5
-$as_echo "$hard_links" >&6; }
- if test "$hard_links" = no; then
- { $as_echo "$as_me:$LINENO: WARNING: \`$CC' does not support \`-c -o', so \`make -j' may be unsafe" >&5
-$as_echo "$as_me: WARNING: \`$CC' does not support \`-c -o', so \`make -j' may be unsafe" >&2;}
- need_locks=warn
- fi
-else
- need_locks=no
-fi
-
-{ $as_echo "$as_me:$LINENO: checking whether the $compiler linker ($LD) supports shared libraries" >&5
-$as_echo_n "checking whether the $compiler linker ($LD) supports shared libraries... " >&6; }
-
- runpath_var=
- allow_undefined_flag_F77=
- enable_shared_with_static_runtimes_F77=no
- archive_cmds_F77=
- archive_expsym_cmds_F77=
- old_archive_From_new_cmds_F77=
- old_archive_from_expsyms_cmds_F77=
- export_dynamic_flag_spec_F77=
- whole_archive_flag_spec_F77=
- thread_safe_flag_spec_F77=
- hardcode_libdir_flag_spec_F77=
- hardcode_libdir_flag_spec_ld_F77=
- hardcode_libdir_separator_F77=
- hardcode_direct_F77=no
- hardcode_minus_L_F77=no
- hardcode_shlibpath_var_F77=unsupported
- link_all_deplibs_F77=unknown
- hardcode_automatic_F77=no
- module_cmds_F77=
- module_expsym_cmds_F77=
- always_export_symbols_F77=no
- export_symbols_cmds_F77='$NM $libobjs $convenience | $global_symbol_pipe | $SED '\''s/.* //'\'' | sort | uniq > $export_symbols'
- # include_expsyms should be a list of space-separated symbols to be *always*
- # included in the symbol list
- include_expsyms_F77=
- # exclude_expsyms can be an extended regexp of symbols to exclude
- # it will be wrapped by ` (' and `)$', so one must not match beginning or
- # end of line. Example: `a|bc|.*d.*' will exclude the symbols `a' and `bc',
- # as well as any symbol that contains `d'.
- exclude_expsyms_F77='_GLOBAL_OFFSET_TABLE_|_GLOBAL__F[ID]_.*'
- # Although _GLOBAL_OFFSET_TABLE_ is a valid symbol C name, most a.out
- # platforms (ab)use it in PIC code, but their linkers get confused if
- # the symbol is explicitly referenced. Since portable code cannot
- # rely on this symbol name, it's probably fine to never include it in
- # preloaded symbol tables.
- # Exclude shared library initialization/finalization symbols.
- extract_expsyms_cmds=
- # Just being paranoid about ensuring that cc_basename is set.
- for cc_temp in $compiler""; do
- case $cc_temp in
- compile | *[\\/]compile | ccache | *[\\/]ccache ) ;;
- distcc | *[\\/]distcc | purify | *[\\/]purify ) ;;
- \-*) ;;
- *) break;;
- esac
-done
-cc_basename=`$echo "X$cc_temp" | $Xsed -e 's%.*/%%' -e "s%^$host_alias-%%"`
-
- case $host_os in
- cygwin* | mingw* | pw32*)
- # FIXME: the MSVC++ port hasn't been tested in a loooong time
- # When not using gcc, we currently assume that we are using
- # Microsoft Visual C++.
- if test "$GCC" != yes; then
- with_gnu_ld=no
- fi
- ;;
- interix*)
- # we just hope/assume this is gcc and not c89 (= MSVC++)
- with_gnu_ld=yes
- ;;
- openbsd*)
- with_gnu_ld=no
- ;;
- esac
-
- ld_shlibs_F77=yes
- if test "$with_gnu_ld" = yes; then
- # If archive_cmds runs LD, not CC, wlarc should be empty
- wlarc='${wl}'
-
- # Set some defaults for GNU ld with shared library support. These
- # are reset later if shared libraries are not supported. Putting them
- # here allows them to be overridden if necessary.
- runpath_var=LD_RUN_PATH
- hardcode_libdir_flag_spec_F77='${wl}--rpath ${wl}$libdir'
- export_dynamic_flag_spec_F77='${wl}--export-dynamic'
- # ancient GNU ld didn't support --whole-archive et. al.
- if $LD --help 2>&1 | grep 'no-whole-archive' > /dev/null; then
- whole_archive_flag_spec_F77="$wlarc"'--whole-archive$convenience '"$wlarc"'--no-whole-archive'
- else
- whole_archive_flag_spec_F77=
- fi
- supports_anon_versioning=no
- case `$LD -v 2>/dev/null` in
- *\ [01].* | *\ 2.[0-9].* | *\ 2.10.*) ;; # catch versions < 2.11
- *\ 2.11.93.0.2\ *) supports_anon_versioning=yes ;; # RH7.3 ...
- *\ 2.11.92.0.12\ *) supports_anon_versioning=yes ;; # Mandrake 8.2 ...
- *\ 2.11.*) ;; # other 2.11 versions
- *) supports_anon_versioning=yes ;;
- esac
-
- # See if GNU ld supports shared libraries.
- case $host_os in
- aix[3-9]*)
- # On AIX/PPC, the GNU linker is very broken
- if test "$host_cpu" != ia64; then
- ld_shlibs_F77=no
- cat <<EOF 1>&2
-
-*** Warning: the GNU linker, at least up to release 2.9.1, is reported
-*** to be unable to reliably create shared libraries on AIX.
-*** Therefore, libtool is disabling shared libraries support. If you
-*** really care for shared libraries, you may want to modify your PATH
-*** so that a non-GNU linker is found, and then restart.
-
-EOF
- fi
- ;;
-
- amigaos*)
- archive_cmds_F77='$rm $output_objdir/a2ixlibrary.data~$echo "#define NAME $libname" > $output_objdir/a2ixlibrary.data~$echo "#define LIBRARY_ID 1" >> $output_objdir/a2ixlibrary.data~$echo "#define VERSION $major" >> $output_objdir/a2ixlibrary.data~$echo "#define REVISION $revision" >> $output_objdir/a2ixlibrary.data~$AR $AR_FLAGS $lib $libobjs~$RANLIB $lib~(cd $output_objdir && a2ixlibrary -32)'
- hardcode_libdir_flag_spec_F77='-L$libdir'
- hardcode_minus_L_F77=yes
-
- # Samuel A. Falvo II <kc5tja@dolphin.openprojects.net> reports
- # that the semantics of dynamic libraries on AmigaOS, at least up
- # to version 4, is to share data among multiple programs linked
- # with the same dynamic library. Since this doesn't match the
- # behavior of shared libraries on other platforms, we can't use
- # them.
- ld_shlibs_F77=no
- ;;
-
- beos*)
- if $LD --help 2>&1 | grep ': supported targets:.* elf' > /dev/null; then
- allow_undefined_flag_F77=unsupported
- # Joseph Beckenbach <jrb3@best.com> says some releases of gcc
- # support --undefined. This deserves some investigation. FIXME
- archive_cmds_F77='$CC -nostart $libobjs $deplibs $compiler_flags ${wl}-soname $wl$soname -o $lib'
- else
- ld_shlibs_F77=no
- fi
- ;;
-
- cygwin* | mingw* | pw32*)
- # _LT_AC_TAGVAR(hardcode_libdir_flag_spec, F77) is actually meaningless,
- # as there is no search path for DLLs.
- hardcode_libdir_flag_spec_F77='-L$libdir'
- allow_undefined_flag_F77=unsupported
- always_export_symbols_F77=no
- enable_shared_with_static_runtimes_F77=yes
- export_symbols_cmds_F77='$NM $libobjs $convenience | $global_symbol_pipe | $SED -e '\''/^[BCDGRS][ ]/s/.*[ ]\([^ ]*\)/\1 DATA/'\'' -e '\''/^[AITW][ ]/s/.*[ ]//'\'' | sort | uniq > $export_symbols'
-
- if $LD --help 2>&1 | grep 'auto-import' > /dev/null; then
- archive_cmds_F77='$CC -shared $libobjs $deplibs $compiler_flags -o $output_objdir/$soname ${wl}--enable-auto-image-base -Xlinker --out-implib -Xlinker $lib'
- # If the export-symbols file already is a .def file (1st line
- # is EXPORTS), use it as is; otherwise, prepend...
- archive_expsym_cmds_F77='if test "x`$SED 1q $export_symbols`" = xEXPORTS; then
- cp $export_symbols $output_objdir/$soname.def;
- else
- echo EXPORTS > $output_objdir/$soname.def;
- cat $export_symbols >> $output_objdir/$soname.def;
- fi~
- $CC -shared $output_objdir/$soname.def $libobjs $deplibs $compiler_flags -o $output_objdir/$soname ${wl}--enable-auto-image-base -Xlinker --out-implib -Xlinker $lib'
- else
- ld_shlibs_F77=no
- fi
- ;;
-
- interix[3-9]*)
- hardcode_direct_F77=no
- hardcode_shlibpath_var_F77=no
- hardcode_libdir_flag_spec_F77='${wl}-rpath,$libdir'
- export_dynamic_flag_spec_F77='${wl}-E'
- # Hack: On Interix 3.x, we cannot compile PIC because of a broken gcc.
- # Instead, shared libraries are loaded at an image base (0x10000000 by
- # default) and relocated if they conflict, which is a slow very memory
- # consuming and fragmenting process. To avoid this, we pick a random,
- # 256 KiB-aligned image base between 0x50000000 and 0x6FFC0000 at link
- # time. Moving up from 0x10000000 also allows more sbrk(2) space.
- archive_cmds_F77='$CC -shared $pic_flag $libobjs $deplibs $compiler_flags ${wl}-h,$soname ${wl}--image-base,`expr ${RANDOM-$$} % 4096 / 2 \* 262144 + 1342177280` -o $lib'
- archive_expsym_cmds_F77='sed "s,^,_," $export_symbols >$output_objdir/$soname.expsym~$CC -shared $pic_flag $libobjs $deplibs $compiler_flags ${wl}-h,$soname ${wl}--retain-symbols-file,$output_objdir/$soname.expsym ${wl}--image-base,`expr ${RANDOM-$$} % 4096 / 2 \* 262144 + 1342177280` -o $lib'
- ;;
-
- gnu* | linux* | k*bsd*-gnu)
- if $LD --help 2>&1 | grep ': supported targets:.* elf' > /dev/null; then
- tmp_addflag=
- case $cc_basename,$host_cpu in
- pgcc*) # Portland Group C compiler
- whole_archive_flag_spec_F77='${wl}--whole-archive`for conv in $convenience\"\"; do test -n \"$conv\" && new_convenience=\"$new_convenience,$conv\"; done; $echo \"$new_convenience\"` ${wl}--no-whole-archive'
- tmp_addflag=' $pic_flag'
- ;;
- pgf77* | pgf90* | pgf95*) # Portland Group f77 and f90 compilers
- whole_archive_flag_spec_F77='${wl}--whole-archive`for conv in $convenience\"\"; do test -n \"$conv\" && new_convenience=\"$new_convenience,$conv\"; done; $echo \"$new_convenience\"` ${wl}--no-whole-archive'
- tmp_addflag=' $pic_flag -Mnomain' ;;
- ecc*,ia64* | icc*,ia64*) # Intel C compiler on ia64
- tmp_addflag=' -i_dynamic' ;;
- efc*,ia64* | ifort*,ia64*) # Intel Fortran compiler on ia64
- tmp_addflag=' -i_dynamic -nofor_main' ;;
- ifc* | ifort*) # Intel Fortran compiler
- tmp_addflag=' -nofor_main' ;;
- esac
- case `$CC -V 2>&1 | sed 5q` in
- *Sun\ C*) # Sun C 5.9
- whole_archive_flag_spec_F77='${wl}--whole-archive`new_convenience=; for conv in $convenience\"\"; do test -z \"$conv\" || new_convenience=\"$new_convenience,$conv\"; done; $echo \"$new_convenience\"` ${wl}--no-whole-archive'
- tmp_sharedflag='-G' ;;
- *Sun\ F*) # Sun Fortran 8.3
- tmp_sharedflag='-G' ;;
- *)
- tmp_sharedflag='-shared' ;;
- esac
- archive_cmds_F77='$CC '"$tmp_sharedflag""$tmp_addflag"' $libobjs $deplibs $compiler_flags ${wl}-soname $wl$soname -o $lib'
-
- if test $supports_anon_versioning = yes; then
- archive_expsym_cmds_F77='$echo "{ global:" > $output_objdir/$libname.ver~
- cat $export_symbols | sed -e "s/\(.*\)/\1;/" >> $output_objdir/$libname.ver~
- $echo "local: *; };" >> $output_objdir/$libname.ver~
- $CC '"$tmp_sharedflag""$tmp_addflag"' $libobjs $deplibs $compiler_flags ${wl}-soname $wl$soname ${wl}-version-script ${wl}$output_objdir/$libname.ver -o $lib'
- fi
- else
- ld_shlibs_F77=no
- fi
- ;;
-
- netbsd*)
- if echo __ELF__ | $CC -E - | grep __ELF__ >/dev/null; then
- archive_cmds_F77='$LD -Bshareable $libobjs $deplibs $linker_flags -o $lib'
- wlarc=
- else
- archive_cmds_F77='$CC -shared $libobjs $deplibs $compiler_flags ${wl}-soname $wl$soname -o $lib'
- archive_expsym_cmds_F77='$CC -shared $libobjs $deplibs $compiler_flags ${wl}-soname $wl$soname ${wl}-retain-symbols-file $wl$export_symbols -o $lib'
- fi
- ;;
-
- solaris*)
- if $LD -v 2>&1 | grep 'BFD 2\.8' > /dev/null; then
- ld_shlibs_F77=no
- cat <<EOF 1>&2
-
-*** Warning: The releases 2.8.* of the GNU linker cannot reliably
-*** create shared libraries on Solaris systems. Therefore, libtool
-*** is disabling shared libraries support. We urge you to upgrade GNU
-*** binutils to release 2.9.1 or newer. Another option is to modify
-*** your PATH or compiler configuration so that the native linker is
-*** used, and then restart.
-
-EOF
- elif $LD --help 2>&1 | grep ': supported targets:.* elf' > /dev/null; then
- archive_cmds_F77='$CC -shared $libobjs $deplibs $compiler_flags ${wl}-soname $wl$soname -o $lib'
- archive_expsym_cmds_F77='$CC -shared $libobjs $deplibs $compiler_flags ${wl}-soname $wl$soname ${wl}-retain-symbols-file $wl$export_symbols -o $lib'
- else
- ld_shlibs_F77=no
- fi
- ;;
-
- sysv5* | sco3.2v5* | sco5v6* | unixware* | OpenUNIX*)
- case `$LD -v 2>&1` in
- *\ [01].* | *\ 2.[0-9].* | *\ 2.1[0-5].*)
- ld_shlibs_F77=no
- cat <<_LT_EOF 1>&2
-
-*** Warning: Releases of the GNU linker prior to 2.16.91.0.3 can not
-*** reliably create shared libraries on SCO systems. Therefore, libtool
-*** is disabling shared libraries support. We urge you to upgrade GNU
-*** binutils to release 2.16.91.0.3 or newer. Another option is to modify
-*** your PATH or compiler configuration so that the native linker is
-*** used, and then restart.
-
-_LT_EOF
- ;;
- *)
- if $LD --help 2>&1 | grep ': supported targets:.* elf' > /dev/null; then
- hardcode_libdir_flag_spec_F77='`test -z "$SCOABSPATH" && echo ${wl}-rpath,$libdir`'
- archive_cmds_F77='$CC -shared $libobjs $deplibs $compiler_flags ${wl}-soname,\${SCOABSPATH:+${install_libdir}/}$soname -o $lib'
- archive_expsym_cmds_F77='$CC -shared $libobjs $deplibs $compiler_flags ${wl}-soname,\${SCOABSPATH:+${install_libdir}/}$soname,-retain-symbols-file,$export_symbols -o $lib'
- else
- ld_shlibs_F77=no
- fi
- ;;
- esac
- ;;
-
- sunos4*)
- archive_cmds_F77='$LD -assert pure-text -Bshareable -o $lib $libobjs $deplibs $linker_flags'
- wlarc=
- hardcode_direct_F77=yes
- hardcode_shlibpath_var_F77=no
- ;;
-
- *)
- if $LD --help 2>&1 | grep ': supported targets:.* elf' > /dev/null; then
- archive_cmds_F77='$CC -shared $libobjs $deplibs $compiler_flags ${wl}-soname $wl$soname -o $lib'
- archive_expsym_cmds_F77='$CC -shared $libobjs $deplibs $compiler_flags ${wl}-soname $wl$soname ${wl}-retain-symbols-file $wl$export_symbols -o $lib'
- else
- ld_shlibs_F77=no
- fi
- ;;
- esac
-
- if test "$ld_shlibs_F77" = no; then
- runpath_var=
- hardcode_libdir_flag_spec_F77=
- export_dynamic_flag_spec_F77=
- whole_archive_flag_spec_F77=
- fi
- else
- # PORTME fill in a description of your system's linker (not GNU ld)
- case $host_os in
- aix3*)
- allow_undefined_flag_F77=unsupported
- always_export_symbols_F77=yes
- archive_expsym_cmds_F77='$LD -o $output_objdir/$soname $libobjs $deplibs $linker_flags -bE:$export_symbols -T512 -H512 -bM:SRE~$AR $AR_FLAGS $lib $output_objdir/$soname'
- # Note: this linker hardcodes the directories in LIBPATH if there
- # are no directories specified by -L.
- hardcode_minus_L_F77=yes
- if test "$GCC" = yes && test -z "$lt_prog_compiler_static"; then
- # Neither direct hardcoding nor static linking is supported with a
- # broken collect2.
- hardcode_direct_F77=unsupported
- fi
- ;;
-
- aix[4-9]*)
- if test "$host_cpu" = ia64; then
- # On IA64, the linker does run time linking by default, so we don't
- # have to do anything special.
- aix_use_runtimelinking=no
- exp_sym_flag='-Bexport'
- no_entry_flag=""
- else
- # If we're using GNU nm, then we don't want the "-C" option.
- # -C means demangle to AIX nm, but means don't demangle with GNU nm
- if $NM -V 2>&1 | grep 'GNU' > /dev/null; then
- export_symbols_cmds_F77='$NM -Bpg $libobjs $convenience | awk '\''{ if (((\$2 == "T") || (\$2 == "D") || (\$2 == "B")) && (substr(\$3,1,1) != ".")) { print \$3 } }'\'' | sort -u > $export_symbols'
- else
- export_symbols_cmds_F77='$NM -BCpg $libobjs $convenience | awk '\''{ if (((\$2 == "T") || (\$2 == "D") || (\$2 == "B")) && (substr(\$3,1,1) != ".")) { print \$3 } }'\'' | sort -u > $export_symbols'
- fi
- aix_use_runtimelinking=no
-
- # Test if we are trying to use run time linking or normal
- # AIX style linking. If -brtl is somewhere in LDFLAGS, we
- # need to do runtime linking.
- case $host_os in aix4.[23]|aix4.[23].*|aix[5-9]*)
- for ld_flag in $LDFLAGS; do
- if (test $ld_flag = "-brtl" || test $ld_flag = "-Wl,-brtl"); then
- aix_use_runtimelinking=yes
- break
- fi
- done
- ;;
- esac
-
- exp_sym_flag='-bexport'
- no_entry_flag='-bnoentry'
- fi
-
- # When large executables or shared objects are built, AIX ld can
- # have problems creating the table of contents. If linking a library
- # or program results in "error TOC overflow" add -mminimal-toc to
- # CXXFLAGS/CFLAGS for g++/gcc. In the cases where that is not
- # enough to fix the problem, add -Wl,-bbigtoc to LDFLAGS.
-
- archive_cmds_F77=''
- hardcode_direct_F77=yes
- hardcode_libdir_separator_F77=':'
- link_all_deplibs_F77=yes
-
- if test "$GCC" = yes; then
- case $host_os in aix4.[012]|aix4.[012].*)
- # We only want to do this on AIX 4.2 and lower, the check
- # below for broken collect2 doesn't work under 4.3+
- collect2name=`${CC} -print-prog-name=collect2`
- if test -f "$collect2name" && \
- strings "$collect2name" | grep resolve_lib_name >/dev/null
- then
- # We have reworked collect2
- :
- else
- # We have old collect2
- hardcode_direct_F77=unsupported
- # It fails to find uninstalled libraries when the uninstalled
- # path is not listed in the libpath. Setting hardcode_minus_L
- # to unsupported forces relinking
- hardcode_minus_L_F77=yes
- hardcode_libdir_flag_spec_F77='-L$libdir'
- hardcode_libdir_separator_F77=
- fi
- ;;
- esac
- shared_flag='-shared'
- if test "$aix_use_runtimelinking" = yes; then
- shared_flag="$shared_flag "'${wl}-G'
- fi
- else
- # not using gcc
- if test "$host_cpu" = ia64; then
- # VisualAge C++, Version 5.5 for AIX 5L for IA-64, Beta 3 Release
- # chokes on -Wl,-G. The following line is correct:
- shared_flag='-G'
- else
- if test "$aix_use_runtimelinking" = yes; then
- shared_flag='${wl}-G'
- else
- shared_flag='${wl}-bM:SRE'
- fi
- fi
- fi
-
- # It seems that -bexpall does not export symbols beginning with
- # underscore (_), so it is better to generate a list of symbols to export.
- always_export_symbols_F77=yes
- if test "$aix_use_runtimelinking" = yes; then
- # Warning - without using the other runtime loading flags (-brtl),
- # -berok will link without error, but may produce a broken library.
- allow_undefined_flag_F77='-berok'
- # Determine the default libpath from the value encoded in an empty executable.
- cat >conftest.$ac_ext <<_ACEOF
- program main
-
- end
-_ACEOF
-rm -f conftest.$ac_objext conftest$ac_exeext
-if { (ac_try="$ac_link"
-case "(($ac_try" in
- *\"* | *\`* | *\\*) ac_try_echo=\$ac_try;;
- *) ac_try_echo=$ac_try;;
-esac
-eval ac_try_echo="\"\$as_me:$LINENO: $ac_try_echo\""
-$as_echo "$ac_try_echo") >&5
- (eval "$ac_link") 2>conftest.er1
- ac_status=$?
- grep -v '^ *+' conftest.er1 >conftest.err
- rm -f conftest.er1
- cat conftest.err >&5
- $as_echo "$as_me:$LINENO: \$? = $ac_status" >&5
- (exit $ac_status); } && {
- test -z "$ac_f77_werror_flag" ||
- test ! -s conftest.err
- } && test -s conftest$ac_exeext && {
- test "$cross_compiling" = yes ||
- $as_test_x conftest$ac_exeext
- }; then
-
-lt_aix_libpath_sed='
- /Import File Strings/,/^$/ {
- /^0/ {
- s/^0 *\(.*\)$/\1/
- p
- }
- }'
-aix_libpath=`dump -H conftest$ac_exeext 2>/dev/null | $SED -n -e "$lt_aix_libpath_sed"`
-# Check for a 64-bit object if we didn't find anything.
-if test -z "$aix_libpath"; then
- aix_libpath=`dump -HX64 conftest$ac_exeext 2>/dev/null | $SED -n -e "$lt_aix_libpath_sed"`
-fi
-else
- $as_echo "$as_me: failed program was:" >&5
-sed 's/^/| /' conftest.$ac_ext >&5
-
-
-fi
-
-rm -rf conftest.dSYM
-rm -f core conftest.err conftest.$ac_objext conftest_ipa8_conftest.oo \
- conftest$ac_exeext conftest.$ac_ext
-if test -z "$aix_libpath"; then aix_libpath="/usr/lib:/lib"; fi
-
- hardcode_libdir_flag_spec_F77='${wl}-blibpath:$libdir:'"$aix_libpath"
- archive_expsym_cmds_F77="\$CC"' -o $output_objdir/$soname $libobjs $deplibs '"\${wl}$no_entry_flag"' $compiler_flags `if test "x${allow_undefined_flag}" != "x"; then echo "${wl}${allow_undefined_flag}"; else :; fi` '"\${wl}$exp_sym_flag:\$export_symbols $shared_flag"
- else
- if test "$host_cpu" = ia64; then
- hardcode_libdir_flag_spec_F77='${wl}-R $libdir:/usr/lib:/lib'
- allow_undefined_flag_F77="-z nodefs"
- archive_expsym_cmds_F77="\$CC $shared_flag"' -o $output_objdir/$soname $libobjs $deplibs '"\${wl}$no_entry_flag"' $compiler_flags ${wl}${allow_undefined_flag} '"\${wl}$exp_sym_flag:\$export_symbols"
- else
- # Determine the default libpath from the value encoded in an empty executable.
- cat >conftest.$ac_ext <<_ACEOF
- program main
-
- end
-_ACEOF
-rm -f conftest.$ac_objext conftest$ac_exeext
-if { (ac_try="$ac_link"
-case "(($ac_try" in
- *\"* | *\`* | *\\*) ac_try_echo=\$ac_try;;
- *) ac_try_echo=$ac_try;;
-esac
-eval ac_try_echo="\"\$as_me:$LINENO: $ac_try_echo\""
-$as_echo "$ac_try_echo") >&5
- (eval "$ac_link") 2>conftest.er1
- ac_status=$?
- grep -v '^ *+' conftest.er1 >conftest.err
- rm -f conftest.er1
- cat conftest.err >&5
- $as_echo "$as_me:$LINENO: \$? = $ac_status" >&5
- (exit $ac_status); } && {
- test -z "$ac_f77_werror_flag" ||
- test ! -s conftest.err
- } && test -s conftest$ac_exeext && {
- test "$cross_compiling" = yes ||
- $as_test_x conftest$ac_exeext
- }; then
-
-lt_aix_libpath_sed='
- /Import File Strings/,/^$/ {
- /^0/ {
- s/^0 *\(.*\)$/\1/
- p
- }
- }'
-aix_libpath=`dump -H conftest$ac_exeext 2>/dev/null | $SED -n -e "$lt_aix_libpath_sed"`
-# Check for a 64-bit object if we didn't find anything.
-if test -z "$aix_libpath"; then
- aix_libpath=`dump -HX64 conftest$ac_exeext 2>/dev/null | $SED -n -e "$lt_aix_libpath_sed"`
-fi
-else
- $as_echo "$as_me: failed program was:" >&5
-sed 's/^/| /' conftest.$ac_ext >&5
-
-
-fi
-
-rm -rf conftest.dSYM
-rm -f core conftest.err conftest.$ac_objext conftest_ipa8_conftest.oo \
- conftest$ac_exeext conftest.$ac_ext
-if test -z "$aix_libpath"; then aix_libpath="/usr/lib:/lib"; fi
-
- hardcode_libdir_flag_spec_F77='${wl}-blibpath:$libdir:'"$aix_libpath"
- # Warning - without using the other run time loading flags,
- # -berok will link without error, but may produce a broken library.
- no_undefined_flag_F77=' ${wl}-bernotok'
- allow_undefined_flag_F77=' ${wl}-berok'
- # Exported symbols can be pulled into shared objects from archives
- whole_archive_flag_spec_F77='$convenience'
- archive_cmds_need_lc_F77=yes
- # This is similar to how AIX traditionally builds its shared libraries.
- archive_expsym_cmds_F77="\$CC $shared_flag"' -o $output_objdir/$soname $libobjs $deplibs ${wl}-bnoentry $compiler_flags ${wl}-bE:$export_symbols${allow_undefined_flag}~$AR $AR_FLAGS $output_objdir/$libname$release.a $output_objdir/$soname'
- fi
- fi
- ;;
-
- amigaos*)
- archive_cmds_F77='$rm $output_objdir/a2ixlibrary.data~$echo "#define NAME $libname" > $output_objdir/a2ixlibrary.data~$echo "#define LIBRARY_ID 1" >> $output_objdir/a2ixlibrary.data~$echo "#define VERSION $major" >> $output_objdir/a2ixlibrary.data~$echo "#define REVISION $revision" >> $output_objdir/a2ixlibrary.data~$AR $AR_FLAGS $lib $libobjs~$RANLIB $lib~(cd $output_objdir && a2ixlibrary -32)'
- hardcode_libdir_flag_spec_F77='-L$libdir'
- hardcode_minus_L_F77=yes
- # see comment about different semantics on the GNU ld section
- ld_shlibs_F77=no
- ;;
-
- bsdi[45]*)
- export_dynamic_flag_spec_F77=-rdynamic
- ;;
-
- cygwin* | mingw* | pw32*)
- # When not using gcc, we currently assume that we are using
- # Microsoft Visual C++.
- # hardcode_libdir_flag_spec is actually meaningless, as there is
- # no search path for DLLs.
- hardcode_libdir_flag_spec_F77=' '
- allow_undefined_flag_F77=unsupported
- # Tell ltmain to make .lib files, not .a files.
- libext=lib
- # Tell ltmain to make .dll files, not .so files.
- shrext_cmds=".dll"
- # FIXME: Setting linknames here is a bad hack.
- archive_cmds_F77='$CC -o $lib $libobjs $compiler_flags `echo "$deplibs" | $SED -e '\''s/ -lc$//'\''` -link -dll~linknames='
- # The linker will automatically build a .lib file if we build a DLL.
- old_archive_From_new_cmds_F77='true'
- # FIXME: Should let the user specify the lib program.
- old_archive_cmds_F77='lib -OUT:$oldlib$oldobjs$old_deplibs'
- fix_srcfile_path_F77='`cygpath -w "$srcfile"`'
- enable_shared_with_static_runtimes_F77=yes
- ;;
-
- darwin* | rhapsody*)
- case $host_os in
- rhapsody* | darwin1.[012])
- allow_undefined_flag_F77='${wl}-undefined ${wl}suppress'
- ;;
- *) # Darwin 1.3 on
- if test -z ${MACOSX_DEPLOYMENT_TARGET} ; then
- allow_undefined_flag_F77='${wl}-flat_namespace ${wl}-undefined ${wl}suppress'
- else
- case ${MACOSX_DEPLOYMENT_TARGET} in
- 10.[012])
- allow_undefined_flag_F77='${wl}-flat_namespace ${wl}-undefined ${wl}suppress'
- ;;
- 10.*)
- allow_undefined_flag_F77='${wl}-undefined ${wl}dynamic_lookup'
- ;;
- esac
- fi
- ;;
- esac
- archive_cmds_need_lc_F77=no
- hardcode_direct_F77=no
- hardcode_automatic_F77=yes
- hardcode_shlibpath_var_F77=unsupported
- whole_archive_flag_spec_F77=''
- link_all_deplibs_F77=yes
- if test "$GCC" = yes ; then
- output_verbose_link_cmd='echo'
- archive_cmds_F77="\$CC -dynamiclib \$allow_undefined_flag -o \$lib \$libobjs \$deplibs \$compiler_flags -install_name \$rpath/\$soname \$verstring $_lt_dar_single_mod${_lt_dsymutil}"
- module_cmds_F77="\$CC \$allow_undefined_flag -o \$lib -bundle \$libobjs \$deplibs \$compiler_flags${_lt_dsymutil}"
- archive_expsym_cmds_F77="sed 's,^,_,' < \$export_symbols > \$output_objdir/\${libname}-symbols.expsym~\$CC -dynamiclib \$allow_undefined_flag -o \$lib \$libobjs \$deplibs \$compiler_flags -install_name \$rpath/\$soname \$verstring ${_lt_dar_single_mod}${_lt_dar_export_syms}${_lt_dsymutil}"
- module_expsym_cmds_F77="sed -e 's,^,_,' < \$export_symbols > \$output_objdir/\${libname}-symbols.expsym~\$CC \$allow_undefined_flag -o \$lib -bundle \$libobjs \$deplibs \$compiler_flags${_lt_dar_export_syms}${_lt_dsymutil}"
- else
- case $cc_basename in
- xlc*)
- output_verbose_link_cmd='echo'
- archive_cmds_F77='$CC -qmkshrobj $allow_undefined_flag -o $lib $libobjs $deplibs $compiler_flags ${wl}-install_name ${wl}`echo $rpath/$soname` $xlcverstring'
- module_cmds_F77='$CC $allow_undefined_flag -o $lib -bundle $libobjs $deplibs$compiler_flags'
- # Don't fix this by using the ld -exported_symbols_list flag, it doesn't exist in older darwin lds
- archive_expsym_cmds_F77='sed -e "s,#.*,," -e "s,^[ ]*,," -e "s,^\(..*\),_&," < $export_symbols > $output_objdir/${libname}-symbols.expsym~$CC -qmkshrobj $allow_undefined_flag -o $lib $libobjs $deplibs $compiler_flags ${wl}-install_name ${wl}$rpath/$soname $xlcverstring~nmedit -s $output_objdir/${libname}-symbols.expsym ${lib}'
- module_expsym_cmds_F77='sed -e "s,#.*,," -e "s,^[ ]*,," -e "s,^\(..*\),_&," < $export_symbols > $output_objdir/${libname}-symbols.expsym~$CC $allow_undefined_flag -o $lib -bundle $libobjs $deplibs$compiler_flags~nmedit -s $output_objdir/${libname}-symbols.expsym ${lib}'
- ;;
- *)
- ld_shlibs_F77=no
- ;;
- esac
- fi
- ;;
-
- dgux*)
- archive_cmds_F77='$LD -G -h $soname -o $lib $libobjs $deplibs $linker_flags'
- hardcode_libdir_flag_spec_F77='-L$libdir'
- hardcode_shlibpath_var_F77=no
- ;;
-
- freebsd1*)
- ld_shlibs_F77=no
- ;;
-
- # FreeBSD 2.2.[012] allows us to include c++rt0.o to get C++ constructor
- # support. Future versions do this automatically, but an explicit c++rt0.o
- # does not break anything, and helps significantly (at the cost of a little
- # extra space).
- freebsd2.2*)
- archive_cmds_F77='$LD -Bshareable -o $lib $libobjs $deplibs $linker_flags /usr/lib/c++rt0.o'
- hardcode_libdir_flag_spec_F77='-R$libdir'
- hardcode_direct_F77=yes
- hardcode_shlibpath_var_F77=no
- ;;
-
- # Unfortunately, older versions of FreeBSD 2 do not have this feature.
- freebsd2*)
- archive_cmds_F77='$LD -Bshareable -o $lib $libobjs $deplibs $linker_flags'
- hardcode_direct_F77=yes
- hardcode_minus_L_F77=yes
- hardcode_shlibpath_var_F77=no
- ;;
-
- # FreeBSD 3 and greater uses gcc -shared to do shared libraries.
- freebsd* | dragonfly*)
- archive_cmds_F77='$CC -shared -o $lib $libobjs $deplibs $compiler_flags'
- hardcode_libdir_flag_spec_F77='-R$libdir'
- hardcode_direct_F77=yes
- hardcode_shlibpath_var_F77=no
- ;;
-
- hpux9*)
- if test "$GCC" = yes; then
- archive_cmds_F77='$rm $output_objdir/$soname~$CC -shared -fPIC ${wl}+b ${wl}$install_libdir -o $output_objdir/$soname $libobjs $deplibs $compiler_flags~test $output_objdir/$soname = $lib || mv $output_objdir/$soname $lib'
- else
- archive_cmds_F77='$rm $output_objdir/$soname~$LD -b +b $install_libdir -o $output_objdir/$soname $libobjs $deplibs $linker_flags~test $output_objdir/$soname = $lib || mv $output_objdir/$soname $lib'
- fi
- hardcode_libdir_flag_spec_F77='${wl}+b ${wl}$libdir'
- hardcode_libdir_separator_F77=:
- hardcode_direct_F77=yes
-
- # hardcode_minus_L: Not really in the search PATH,
- # but as the default location of the library.
- hardcode_minus_L_F77=yes
- export_dynamic_flag_spec_F77='${wl}-E'
- ;;
-
- hpux10*)
- if test "$GCC" = yes -a "$with_gnu_ld" = no; then
- archive_cmds_F77='$CC -shared -fPIC ${wl}+h ${wl}$soname ${wl}+b ${wl}$install_libdir -o $lib $libobjs $deplibs $compiler_flags'
- else
- archive_cmds_F77='$LD -b +h $soname +b $install_libdir -o $lib $libobjs $deplibs $linker_flags'
- fi
- if test "$with_gnu_ld" = no; then
- hardcode_libdir_flag_spec_F77='${wl}+b ${wl}$libdir'
- hardcode_libdir_separator_F77=:
-
- hardcode_direct_F77=yes
- export_dynamic_flag_spec_F77='${wl}-E'
-
- # hardcode_minus_L: Not really in the search PATH,
- # but as the default location of the library.
- hardcode_minus_L_F77=yes
- fi
- ;;
-
- hpux11*)
- if test "$GCC" = yes -a "$with_gnu_ld" = no; then
- case $host_cpu in
- hppa*64*)
- archive_cmds_F77='$CC -shared ${wl}+h ${wl}$soname -o $lib $libobjs $deplibs $compiler_flags'
- ;;
- ia64*)
- archive_cmds_F77='$CC -shared ${wl}+h ${wl}$soname ${wl}+nodefaultrpath -o $lib $libobjs $deplibs $compiler_flags'
- ;;
- *)
- archive_cmds_F77='$CC -shared -fPIC ${wl}+h ${wl}$soname ${wl}+b ${wl}$install_libdir -o $lib $libobjs $deplibs $compiler_flags'
- ;;
- esac
- else
- case $host_cpu in
- hppa*64*)
- archive_cmds_F77='$CC -b ${wl}+h ${wl}$soname -o $lib $libobjs $deplibs $compiler_flags'
- ;;
- ia64*)
- archive_cmds_F77='$CC -b ${wl}+h ${wl}$soname ${wl}+nodefaultrpath -o $lib $libobjs $deplibs $compiler_flags'
- ;;
- *)
- archive_cmds_F77='$CC -b ${wl}+h ${wl}$soname ${wl}+b ${wl}$install_libdir -o $lib $libobjs $deplibs $compiler_flags'
- ;;
- esac
- fi
- if test "$with_gnu_ld" = no; then
- hardcode_libdir_flag_spec_F77='${wl}+b ${wl}$libdir'
- hardcode_libdir_separator_F77=:
-
- case $host_cpu in
- hppa*64*|ia64*)
- hardcode_libdir_flag_spec_ld_F77='+b $libdir'
- hardcode_direct_F77=no
- hardcode_shlibpath_var_F77=no
- ;;
- *)
- hardcode_direct_F77=yes
- export_dynamic_flag_spec_F77='${wl}-E'
-
- # hardcode_minus_L: Not really in the search PATH,
- # but as the default location of the library.
- hardcode_minus_L_F77=yes
- ;;
- esac
- fi
- ;;
-
- irix5* | irix6* | nonstopux*)
- if test "$GCC" = yes; then
- archive_cmds_F77='$CC -shared $libobjs $deplibs $compiler_flags ${wl}-soname ${wl}$soname `test -n "$verstring" && echo ${wl}-set_version ${wl}$verstring` ${wl}-update_registry ${wl}${output_objdir}/so_locations -o $lib'
- else
- archive_cmds_F77='$LD -shared $libobjs $deplibs $linker_flags -soname $soname `test -n "$verstring" && echo -set_version $verstring` -update_registry ${output_objdir}/so_locations -o $lib'
- hardcode_libdir_flag_spec_ld_F77='-rpath $libdir'
- fi
- hardcode_libdir_flag_spec_F77='${wl}-rpath ${wl}$libdir'
- hardcode_libdir_separator_F77=:
- link_all_deplibs_F77=yes
- ;;
-
- netbsd*)
- if echo __ELF__ | $CC -E - | grep __ELF__ >/dev/null; then
- archive_cmds_F77='$LD -Bshareable -o $lib $libobjs $deplibs $linker_flags' # a.out
- else
- archive_cmds_F77='$LD -shared -o $lib $libobjs $deplibs $linker_flags' # ELF
- fi
- hardcode_libdir_flag_spec_F77='-R$libdir'
- hardcode_direct_F77=yes
- hardcode_shlibpath_var_F77=no
- ;;
-
- newsos6)
- archive_cmds_F77='$LD -G -h $soname -o $lib $libobjs $deplibs $linker_flags'
- hardcode_direct_F77=yes
- hardcode_libdir_flag_spec_F77='${wl}-rpath ${wl}$libdir'
- hardcode_libdir_separator_F77=:
- hardcode_shlibpath_var_F77=no
- ;;
-
- openbsd*)
- if test -f /usr/libexec/ld.so; then
- hardcode_direct_F77=yes
- hardcode_shlibpath_var_F77=no
- if test -z "`echo __ELF__ | $CC -E - | grep __ELF__`" || test "$host_os-$host_cpu" = "openbsd2.8-powerpc"; then
- archive_cmds_F77='$CC -shared $pic_flag -o $lib $libobjs $deplibs $compiler_flags'
- archive_expsym_cmds_F77='$CC -shared $pic_flag -o $lib $libobjs $deplibs $compiler_flags ${wl}-retain-symbols-file,$export_symbols'
- hardcode_libdir_flag_spec_F77='${wl}-rpath,$libdir'
- export_dynamic_flag_spec_F77='${wl}-E'
- else
- case $host_os in
- openbsd[01].* | openbsd2.[0-7] | openbsd2.[0-7].*)
- archive_cmds_F77='$LD -Bshareable -o $lib $libobjs $deplibs $linker_flags'
- hardcode_libdir_flag_spec_F77='-R$libdir'
- ;;
- *)
- archive_cmds_F77='$CC -shared $pic_flag -o $lib $libobjs $deplibs $compiler_flags'
- hardcode_libdir_flag_spec_F77='${wl}-rpath,$libdir'
- ;;
- esac
- fi
- else
- ld_shlibs_F77=no
- fi
- ;;
-
- os2*)
- hardcode_libdir_flag_spec_F77='-L$libdir'
- hardcode_minus_L_F77=yes
- allow_undefined_flag_F77=unsupported
- archive_cmds_F77='$echo "LIBRARY $libname INITINSTANCE" > $output_objdir/$libname.def~$echo "DESCRIPTION \"$libname\"" >> $output_objdir/$libname.def~$echo DATA >> $output_objdir/$libname.def~$echo " SINGLE NONSHARED" >> $output_objdir/$libname.def~$echo EXPORTS >> $output_objdir/$libname.def~emxexp $libobjs >> $output_objdir/$libname.def~$CC -Zdll -Zcrtdll -o $lib $libobjs $deplibs $compiler_flags $output_objdir/$libname.def'
- old_archive_From_new_cmds_F77='emximp -o $output_objdir/$libname.a $output_objdir/$libname.def'
- ;;
-
- osf3*)
- if test "$GCC" = yes; then
- allow_undefined_flag_F77=' ${wl}-expect_unresolved ${wl}\*'
- archive_cmds_F77='$CC -shared${allow_undefined_flag} $libobjs $deplibs $compiler_flags ${wl}-soname ${wl}$soname `test -n "$verstring" && echo ${wl}-set_version ${wl}$verstring` ${wl}-update_registry ${wl}${output_objdir}/so_locations -o $lib'
- else
- allow_undefined_flag_F77=' -expect_unresolved \*'
- archive_cmds_F77='$LD -shared${allow_undefined_flag} $libobjs $deplibs $linker_flags -soname $soname `test -n "$verstring" && echo -set_version $verstring` -update_registry ${output_objdir}/so_locations -o $lib'
- fi
- hardcode_libdir_flag_spec_F77='${wl}-rpath ${wl}$libdir'
- hardcode_libdir_separator_F77=:
- ;;
-
- osf4* | osf5*) # as osf3* with the addition of -msym flag
- if test "$GCC" = yes; then
- allow_undefined_flag_F77=' ${wl}-expect_unresolved ${wl}\*'
- archive_cmds_F77='$CC -shared${allow_undefined_flag} $libobjs $deplibs $compiler_flags ${wl}-msym ${wl}-soname ${wl}$soname `test -n "$verstring" && echo ${wl}-set_version ${wl}$verstring` ${wl}-update_registry ${wl}${output_objdir}/so_locations -o $lib'
- hardcode_libdir_flag_spec_F77='${wl}-rpath ${wl}$libdir'
- else
- allow_undefined_flag_F77=' -expect_unresolved \*'
- archive_cmds_F77='$LD -shared${allow_undefined_flag} $libobjs $deplibs $linker_flags -msym -soname $soname `test -n "$verstring" && echo -set_version $verstring` -update_registry ${output_objdir}/so_locations -o $lib'
- archive_expsym_cmds_F77='for i in `cat $export_symbols`; do printf "%s %s\\n" -exported_symbol "\$i" >> $lib.exp; done; echo "-hidden">> $lib.exp~
- $LD -shared${allow_undefined_flag} -input $lib.exp $linker_flags $libobjs $deplibs -soname $soname `test -n "$verstring" && echo -set_version $verstring` -update_registry ${output_objdir}/so_locations -o $lib~$rm $lib.exp'
-
- # Both c and cxx compiler support -rpath directly
- hardcode_libdir_flag_spec_F77='-rpath $libdir'
- fi
- hardcode_libdir_separator_F77=:
- ;;
-
- solaris*)
- no_undefined_flag_F77=' -z text'
- if test "$GCC" = yes; then
- wlarc='${wl}'
- archive_cmds_F77='$CC -shared ${wl}-h ${wl}$soname -o $lib $libobjs $deplibs $compiler_flags'
- archive_expsym_cmds_F77='$echo "{ global:" > $lib.exp~cat $export_symbols | $SED -e "s/\(.*\)/\1;/" >> $lib.exp~$echo "local: *; };" >> $lib.exp~
- $CC -shared ${wl}-M ${wl}$lib.exp ${wl}-h ${wl}$soname -o $lib $libobjs $deplibs $compiler_flags~$rm $lib.exp'
- else
- wlarc=''
- archive_cmds_F77='$LD -G${allow_undefined_flag} -h $soname -o $lib $libobjs $deplibs $linker_flags'
- archive_expsym_cmds_F77='$echo "{ global:" > $lib.exp~cat $export_symbols | $SED -e "s/\(.*\)/\1;/" >> $lib.exp~$echo "local: *; };" >> $lib.exp~
- $LD -G${allow_undefined_flag} -M $lib.exp -h $soname -o $lib $libobjs $deplibs $linker_flags~$rm $lib.exp'
- fi
- hardcode_libdir_flag_spec_F77='-R$libdir'
- hardcode_shlibpath_var_F77=no
- case $host_os in
- solaris2.[0-5] | solaris2.[0-5].*) ;;
- *)
- # The compiler driver will combine and reorder linker options,
- # but understands `-z linker_flag'. GCC discards it without `$wl',
- # but is careful enough not to reorder.
- # Supported since Solaris 2.6 (maybe 2.5.1?)
- if test "$GCC" = yes; then
- whole_archive_flag_spec_F77='${wl}-z ${wl}allextract$convenience ${wl}-z ${wl}defaultextract'
- else
- whole_archive_flag_spec_F77='-z allextract$convenience -z defaultextract'
- fi
- ;;
- esac
- link_all_deplibs_F77=yes
- ;;
-
- sunos4*)
- if test "x$host_vendor" = xsequent; then
- # Use $CC to link under sequent, because it throws in some extra .o
- # files that make .init and .fini sections work.
- archive_cmds_F77='$CC -G ${wl}-h $soname -o $lib $libobjs $deplibs $compiler_flags'
- else
- archive_cmds_F77='$LD -assert pure-text -Bstatic -o $lib $libobjs $deplibs $linker_flags'
- fi
- hardcode_libdir_flag_spec_F77='-L$libdir'
- hardcode_direct_F77=yes
- hardcode_minus_L_F77=yes
- hardcode_shlibpath_var_F77=no
- ;;
-
- sysv4)
- case $host_vendor in
- sni)
- archive_cmds_F77='$LD -G -h $soname -o $lib $libobjs $deplibs $linker_flags'
- hardcode_direct_F77=yes # is this really true???
- ;;
- siemens)
- ## LD is ld it makes a PLAMLIB
- ## CC just makes a GrossModule.
- archive_cmds_F77='$LD -G -o $lib $libobjs $deplibs $linker_flags'
- reload_cmds_F77='$CC -r -o $output$reload_objs'
- hardcode_direct_F77=no
- ;;
- motorola)
- archive_cmds_F77='$LD -G -h $soname -o $lib $libobjs $deplibs $linker_flags'
- hardcode_direct_F77=no #Motorola manual says yes, but my tests say they lie
- ;;
- esac
- runpath_var='LD_RUN_PATH'
- hardcode_shlibpath_var_F77=no
- ;;
-
- sysv4.3*)
- archive_cmds_F77='$LD -G -h $soname -o $lib $libobjs $deplibs $linker_flags'
- hardcode_shlibpath_var_F77=no
- export_dynamic_flag_spec_F77='-Bexport'
- ;;
-
- sysv4*MP*)
- if test -d /usr/nec; then
- archive_cmds_F77='$LD -G -h $soname -o $lib $libobjs $deplibs $linker_flags'
- hardcode_shlibpath_var_F77=no
- runpath_var=LD_RUN_PATH
- hardcode_runpath_var=yes
- ld_shlibs_F77=yes
- fi
- ;;
-
- sysv4*uw2* | sysv5OpenUNIX* | sysv5UnixWare7.[01].[10]* | unixware7* | sco3.2v5.0.[024]*)
- no_undefined_flag_F77='${wl}-z,text'
- archive_cmds_need_lc_F77=no
- hardcode_shlibpath_var_F77=no
- runpath_var='LD_RUN_PATH'
-
- if test "$GCC" = yes; then
- archive_cmds_F77='$CC -shared ${wl}-h,$soname -o $lib $libobjs $deplibs $compiler_flags'
- archive_expsym_cmds_F77='$CC -shared ${wl}-Bexport:$export_symbols ${wl}-h,$soname -o $lib $libobjs $deplibs $compiler_flags'
- else
- archive_cmds_F77='$CC -G ${wl}-h,$soname -o $lib $libobjs $deplibs $compiler_flags'
- archive_expsym_cmds_F77='$CC -G ${wl}-Bexport:$export_symbols ${wl}-h,$soname -o $lib $libobjs $deplibs $compiler_flags'
- fi
- ;;
-
- sysv5* | sco3.2v5* | sco5v6*)
- # Note: We can NOT use -z defs as we might desire, because we do not
- # link with -lc, and that would cause any symbols used from libc to
- # always be unresolved, which means just about no library would
- # ever link correctly. If we're not using GNU ld we use -z text
- # though, which does catch some bad symbols but isn't as heavy-handed
- # as -z defs.
- no_undefined_flag_F77='${wl}-z,text'
- allow_undefined_flag_F77='${wl}-z,nodefs'
- archive_cmds_need_lc_F77=no
- hardcode_shlibpath_var_F77=no
- hardcode_libdir_flag_spec_F77='`test -z "$SCOABSPATH" && echo ${wl}-R,$libdir`'
- hardcode_libdir_separator_F77=':'
- link_all_deplibs_F77=yes
- export_dynamic_flag_spec_F77='${wl}-Bexport'
- runpath_var='LD_RUN_PATH'
-
- if test "$GCC" = yes; then
- archive_cmds_F77='$CC -shared ${wl}-h,\${SCOABSPATH:+${install_libdir}/}$soname -o $lib $libobjs $deplibs $compiler_flags'
- archive_expsym_cmds_F77='$CC -shared ${wl}-Bexport:$export_symbols ${wl}-h,\${SCOABSPATH:+${install_libdir}/}$soname -o $lib $libobjs $deplibs $compiler_flags'
- else
- archive_cmds_F77='$CC -G ${wl}-h,\${SCOABSPATH:+${install_libdir}/}$soname -o $lib $libobjs $deplibs $compiler_flags'
- archive_expsym_cmds_F77='$CC -G ${wl}-Bexport:$export_symbols ${wl}-h,\${SCOABSPATH:+${install_libdir}/}$soname -o $lib $libobjs $deplibs $compiler_flags'
- fi
- ;;
-
- uts4*)
- archive_cmds_F77='$LD -G -h $soname -o $lib $libobjs $deplibs $linker_flags'
- hardcode_libdir_flag_spec_F77='-L$libdir'
- hardcode_shlibpath_var_F77=no
- ;;
-
- *)
- ld_shlibs_F77=no
- ;;
- esac
- fi
-
-{ $as_echo "$as_me:$LINENO: result: $ld_shlibs_F77" >&5
-$as_echo "$ld_shlibs_F77" >&6; }
-test "$ld_shlibs_F77" = no && can_build_shared=no
-
-#
-# Do we need to explicitly link libc?
-#
-case "x$archive_cmds_need_lc_F77" in
-x|xyes)
- # Assume -lc should be added
- archive_cmds_need_lc_F77=yes
-
- if test "$enable_shared" = yes && test "$GCC" = yes; then
- case $archive_cmds_F77 in
- *'~'*)
- # FIXME: we may have to deal with multi-command sequences.
- ;;
- '$CC '*)
- # Test whether the compiler implicitly links with -lc since on some
- # systems, -lgcc has to come before -lc. If gcc already passes -lc
- # to ld, don't add -lc before -lgcc.
- { $as_echo "$as_me:$LINENO: checking whether -lc should be explicitly linked in" >&5
-$as_echo_n "checking whether -lc should be explicitly linked in... " >&6; }
- $rm conftest*
- echo "$lt_simple_compile_test_code" > conftest.$ac_ext
-
- if { (eval echo "$as_me:$LINENO: \"$ac_compile\"") >&5
- (eval $ac_compile) 2>&5
- ac_status=$?
- $as_echo "$as_me:$LINENO: \$? = $ac_status" >&5
- (exit $ac_status); } 2>conftest.err; then
- soname=conftest
- lib=conftest
- libobjs=conftest.$ac_objext
- deplibs=
- wl=$lt_prog_compiler_wl_F77
- pic_flag=$lt_prog_compiler_pic_F77
- compiler_flags=-v
- linker_flags=-v
- verstring=
- output_objdir=.
- libname=conftest
- lt_save_allow_undefined_flag=$allow_undefined_flag_F77
- allow_undefined_flag_F77=
- if { (eval echo "$as_me:$LINENO: \"$archive_cmds_F77 2\>\&1 \| grep \" -lc \" \>/dev/null 2\>\&1\"") >&5
- (eval $archive_cmds_F77 2\>\&1 \| grep \" -lc \" \>/dev/null 2\>\&1) 2>&5
- ac_status=$?
- $as_echo "$as_me:$LINENO: \$? = $ac_status" >&5
- (exit $ac_status); }
- then
- archive_cmds_need_lc_F77=no
- else
- archive_cmds_need_lc_F77=yes
- fi
- allow_undefined_flag_F77=$lt_save_allow_undefined_flag
- else
- cat conftest.err 1>&5
- fi
- $rm conftest*
- { $as_echo "$as_me:$LINENO: result: $archive_cmds_need_lc_F77" >&5
-$as_echo "$archive_cmds_need_lc_F77" >&6; }
- ;;
- esac
- fi
- ;;
-esac
-
-{ $as_echo "$as_me:$LINENO: checking dynamic linker characteristics" >&5
-$as_echo_n "checking dynamic linker characteristics... " >&6; }
-library_names_spec=
-libname_spec='lib$name'
-soname_spec=
-shrext_cmds=".so"
-postinstall_cmds=
-postuninstall_cmds=
-finish_cmds=
-finish_eval=
-shlibpath_var=
-shlibpath_overrides_runpath=unknown
-version_type=none
-dynamic_linker="$host_os ld.so"
-sys_lib_dlsearch_path_spec="/lib /usr/lib"
-
-need_lib_prefix=unknown
-hardcode_into_libs=no
-
-# when you set need_version to no, make sure it does not cause -set_version
-# flags to be left without arguments
-need_version=unknown
-
-case $host_os in
-aix3*)
- version_type=linux
- library_names_spec='${libname}${release}${shared_ext}$versuffix $libname.a'
- shlibpath_var=LIBPATH
-
- # AIX 3 has no versioning support, so we append a major version to the name.
- soname_spec='${libname}${release}${shared_ext}$major'
- ;;
-
-aix[4-9]*)
- version_type=linux
- need_lib_prefix=no
- need_version=no
- hardcode_into_libs=yes
- if test "$host_cpu" = ia64; then
- # AIX 5 supports IA64
- library_names_spec='${libname}${release}${shared_ext}$major ${libname}${release}${shared_ext}$versuffix $libname${shared_ext}'
- shlibpath_var=LD_LIBRARY_PATH
- else
- # With GCC up to 2.95.x, collect2 would create an import file
- # for dependence libraries. The import file would start with
- # the line `#! .'. This would cause the generated library to
- # depend on `.', always an invalid library. This was fixed in
- # development snapshots of GCC prior to 3.0.
- case $host_os in
- aix4 | aix4.[01] | aix4.[01].*)
- if { echo '#if __GNUC__ > 2 || (__GNUC__ == 2 && __GNUC_MINOR__ >= 97)'
- echo ' yes '
- echo '#endif'; } | ${CC} -E - | grep yes > /dev/null; then
- :
- else
- can_build_shared=no
- fi
- ;;
- esac
- # AIX (on Power*) has no versioning support, so currently we can not hardcode correct
- # soname into executable. Probably we can add versioning support to
- # collect2, so additional links can be useful in future.
- if test "$aix_use_runtimelinking" = yes; then
- # If using run time linking (on AIX 4.2 or later) use lib<name>.so
- # instead of lib<name>.a to let people know that these are not
- # typical AIX shared libraries.
- library_names_spec='${libname}${release}${shared_ext}$versuffix ${libname}${release}${shared_ext}$major $libname${shared_ext}'
- else
- # We preserve .a as extension for shared libraries through AIX4.2
- # and later when we are not doing run time linking.
- library_names_spec='${libname}${release}.a $libname.a'
- soname_spec='${libname}${release}${shared_ext}$major'
- fi
- shlibpath_var=LIBPATH
- fi
- ;;
-
-amigaos*)
- library_names_spec='$libname.ixlibrary $libname.a'
- # Create ${libname}_ixlibrary.a entries in /sys/libs.
- finish_eval='for lib in `ls $libdir/*.ixlibrary 2>/dev/null`; do libname=`$echo "X$lib" | $Xsed -e '\''s%^.*/\([^/]*\)\.ixlibrary$%\1%'\''`; test $rm /sys/libs/${libname}_ixlibrary.a; $show "cd /sys/libs && $LN_S $lib ${libname}_ixlibrary.a"; cd /sys/libs && $LN_S $lib ${libname}_ixlibrary.a || exit 1; done'
- ;;
-
-beos*)
- library_names_spec='${libname}${shared_ext}'
- dynamic_linker="$host_os ld.so"
- shlibpath_var=LIBRARY_PATH
- ;;
-
-bsdi[45]*)
- version_type=linux
- need_version=no
- library_names_spec='${libname}${release}${shared_ext}$versuffix ${libname}${release}${shared_ext}$major $libname${shared_ext}'
- soname_spec='${libname}${release}${shared_ext}$major'
- finish_cmds='PATH="\$PATH:/sbin" ldconfig $libdir'
- shlibpath_var=LD_LIBRARY_PATH
- sys_lib_search_path_spec="/shlib /usr/lib /usr/X11/lib /usr/contrib/lib /lib /usr/local/lib"
- sys_lib_dlsearch_path_spec="/shlib /usr/lib /usr/local/lib"
- # the default ld.so.conf also contains /usr/contrib/lib and
- # /usr/X11R6/lib (/usr/X11 is a link to /usr/X11R6), but let us allow
- # libtool to hard-code these into programs
- ;;
-
-cygwin* | mingw* | pw32*)
- version_type=windows
- shrext_cmds=".dll"
- need_version=no
- need_lib_prefix=no
-
- case $GCC,$host_os in
- yes,cygwin* | yes,mingw* | yes,pw32*)
- library_names_spec='$libname.dll.a'
- # DLL is installed to $(libdir)/../bin by postinstall_cmds
- postinstall_cmds='base_file=`basename \${file}`~
- dlpath=`$SHELL 2>&1 -c '\''. $dir/'\''\${base_file}'\''i;echo \$dlname'\''`~
- dldir=$destdir/`dirname \$dlpath`~
- test -d \$dldir || mkdir -p \$dldir~
- $install_prog $dir/$dlname \$dldir/$dlname~
- chmod a+x \$dldir/$dlname'
- postuninstall_cmds='dldll=`$SHELL 2>&1 -c '\''. $file; echo \$dlname'\''`~
- dlpath=$dir/\$dldll~
- $rm \$dlpath'
- shlibpath_overrides_runpath=yes
-
- case $host_os in
- cygwin*)
- # Cygwin DLLs use 'cyg' prefix rather than 'lib'
- soname_spec='`echo ${libname} | sed -e 's/^lib/cyg/'``echo ${release} | $SED -e 's/[.]/-/g'`${versuffix}${shared_ext}'
- sys_lib_search_path_spec="/usr/lib /lib/w32api /lib /usr/local/lib"
- ;;
- mingw*)
- # MinGW DLLs use traditional 'lib' prefix
- soname_spec='${libname}`echo ${release} | $SED -e 's/[.]/-/g'`${versuffix}${shared_ext}'
- sys_lib_search_path_spec=`$CC -print-search-dirs | grep "^libraries:" | $SED -e "s/^libraries://" -e "s,=/,/,g"`
- if echo "$sys_lib_search_path_spec" | grep ';[c-zC-Z]:/' >/dev/null; then
- # It is most probably a Windows format PATH printed by
- # mingw gcc, but we are running on Cygwin. Gcc prints its search
- # path with ; separators, and with drive letters. We can handle the
- # drive letters (cygwin fileutils understands them), so leave them,
- # especially as we might pass files found there to a mingw objdump,
- # which wouldn't understand a cygwinified path. Ahh.
- sys_lib_search_path_spec=`echo "$sys_lib_search_path_spec" | $SED -e 's/;/ /g'`
- else
- sys_lib_search_path_spec=`echo "$sys_lib_search_path_spec" | $SED -e "s/$PATH_SEPARATOR/ /g"`
- fi
- ;;
- pw32*)
- # pw32 DLLs use 'pw' prefix rather than 'lib'
- library_names_spec='`echo ${libname} | sed -e 's/^lib/pw/'``echo ${release} | $SED -e 's/[.]/-/g'`${versuffix}${shared_ext}'
- ;;
- esac
- ;;
-
- *)
- library_names_spec='${libname}`echo ${release} | $SED -e 's/[.]/-/g'`${versuffix}${shared_ext} $libname.lib'
- ;;
- esac
- dynamic_linker='Win32 ld.exe'
- # FIXME: first we should search . and the directory the executable is in
- shlibpath_var=PATH
- ;;
-
-darwin* | rhapsody*)
- dynamic_linker="$host_os dyld"
- version_type=darwin
- need_lib_prefix=no
- need_version=no
- library_names_spec='${libname}${release}${versuffix}$shared_ext ${libname}${release}${major}$shared_ext ${libname}$shared_ext'
- soname_spec='${libname}${release}${major}$shared_ext'
- shlibpath_overrides_runpath=yes
- shlibpath_var=DYLD_LIBRARY_PATH
- shrext_cmds='`test .$module = .yes && echo .so || echo .dylib`'
-
- sys_lib_dlsearch_path_spec='/usr/local/lib /lib /usr/lib'
- ;;
-
-dgux*)
- version_type=linux
- need_lib_prefix=no
- need_version=no
- library_names_spec='${libname}${release}${shared_ext}$versuffix ${libname}${release}${shared_ext}$major $libname$shared_ext'
- soname_spec='${libname}${release}${shared_ext}$major'
- shlibpath_var=LD_LIBRARY_PATH
- ;;
-
-freebsd1*)
- dynamic_linker=no
- ;;
-
-freebsd* | dragonfly*)
- # DragonFly does not have aout. When/if they implement a new
- # versioning mechanism, adjust this.
- if test -x /usr/bin/objformat; then
- objformat=`/usr/bin/objformat`
- else
- case $host_os in
- freebsd[123]*) objformat=aout ;;
- *) objformat=elf ;;
- esac
- fi
- version_type=freebsd-$objformat
- case $version_type in
- freebsd-elf*)
- library_names_spec='${libname}${release}${shared_ext}$versuffix ${libname}${release}${shared_ext} $libname${shared_ext}'
- need_version=no
- need_lib_prefix=no
- ;;
- freebsd-*)
- library_names_spec='${libname}${release}${shared_ext}$versuffix $libname${shared_ext}$versuffix'
- need_version=yes
- ;;
- esac
- shlibpath_var=LD_LIBRARY_PATH
- case $host_os in
- freebsd2*)
- shlibpath_overrides_runpath=yes
- ;;
- freebsd3.[01]* | freebsdelf3.[01]*)
- shlibpath_overrides_runpath=yes
- hardcode_into_libs=yes
- ;;
- freebsd3.[2-9]* | freebsdelf3.[2-9]* | \
- freebsd4.[0-5] | freebsdelf4.[0-5] | freebsd4.1.1 | freebsdelf4.1.1)
- shlibpath_overrides_runpath=no
- hardcode_into_libs=yes
- ;;
- *) # from 4.6 on, and DragonFly
- shlibpath_overrides_runpath=yes
- hardcode_into_libs=yes
- ;;
- esac
- ;;
-
-gnu*)
- version_type=linux
- need_lib_prefix=no
- need_version=no
- library_names_spec='${libname}${release}${shared_ext}$versuffix ${libname}${release}${shared_ext}${major} ${libname}${shared_ext}'
- soname_spec='${libname}${release}${shared_ext}$major'
- shlibpath_var=LD_LIBRARY_PATH
- hardcode_into_libs=yes
- ;;
-
-hpux9* | hpux10* | hpux11*)
- # Give a soname corresponding to the major version so that dld.sl refuses to
- # link against other versions.
- version_type=sunos
- need_lib_prefix=no
- need_version=no
- case $host_cpu in
- ia64*)
- shrext_cmds='.so'
- hardcode_into_libs=yes
- dynamic_linker="$host_os dld.so"
- shlibpath_var=LD_LIBRARY_PATH
- shlibpath_overrides_runpath=yes # Unless +noenvvar is specified.
- library_names_spec='${libname}${release}${shared_ext}$versuffix ${libname}${release}${shared_ext}$major $libname${shared_ext}'
- soname_spec='${libname}${release}${shared_ext}$major'
- if test "X$HPUX_IA64_MODE" = X32; then
- sys_lib_search_path_spec="/usr/lib/hpux32 /usr/local/lib/hpux32 /usr/local/lib"
- else
- sys_lib_search_path_spec="/usr/lib/hpux64 /usr/local/lib/hpux64"
- fi
- sys_lib_dlsearch_path_spec=$sys_lib_search_path_spec
- ;;
- hppa*64*)
- shrext_cmds='.sl'
- hardcode_into_libs=yes
- dynamic_linker="$host_os dld.sl"
- shlibpath_var=LD_LIBRARY_PATH # How should we handle SHLIB_PATH
- shlibpath_overrides_runpath=yes # Unless +noenvvar is specified.
- library_names_spec='${libname}${release}${shared_ext}$versuffix ${libname}${release}${shared_ext}$major $libname${shared_ext}'
- soname_spec='${libname}${release}${shared_ext}$major'
- sys_lib_search_path_spec="/usr/lib/pa20_64 /usr/ccs/lib/pa20_64"
- sys_lib_dlsearch_path_spec=$sys_lib_search_path_spec
- ;;
- *)
- shrext_cmds='.sl'
- dynamic_linker="$host_os dld.sl"
- shlibpath_var=SHLIB_PATH
- shlibpath_overrides_runpath=no # +s is required to enable SHLIB_PATH
- library_names_spec='${libname}${release}${shared_ext}$versuffix ${libname}${release}${shared_ext}$major $libname${shared_ext}'
- soname_spec='${libname}${release}${shared_ext}$major'
- ;;
- esac
- # HP-UX runs *really* slowly unless shared libraries are mode 555.
- postinstall_cmds='chmod 555 $lib'
- ;;
-
-interix[3-9]*)
- version_type=linux
- need_lib_prefix=no
- need_version=no
- library_names_spec='${libname}${release}${shared_ext}$versuffix ${libname}${release}${shared_ext}$major ${libname}${shared_ext}'
- soname_spec='${libname}${release}${shared_ext}$major'
- dynamic_linker='Interix 3.x ld.so.1 (PE, like ELF)'
- shlibpath_var=LD_LIBRARY_PATH
- shlibpath_overrides_runpath=no
- hardcode_into_libs=yes
- ;;
-
-irix5* | irix6* | nonstopux*)
- case $host_os in
- nonstopux*) version_type=nonstopux ;;
- *)
- if test "$lt_cv_prog_gnu_ld" = yes; then
- version_type=linux
- else
- version_type=irix
- fi ;;
- esac
- need_lib_prefix=no
- need_version=no
- soname_spec='${libname}${release}${shared_ext}$major'
- library_names_spec='${libname}${release}${shared_ext}$versuffix ${libname}${release}${shared_ext}$major ${libname}${release}${shared_ext} $libname${shared_ext}'
- case $host_os in
- irix5* | nonstopux*)
- libsuff= shlibsuff=
- ;;
- *)
- case $LD in # libtool.m4 will add one of these switches to LD
- *-32|*"-32 "|*-melf32bsmip|*"-melf32bsmip ")
- libsuff= shlibsuff= libmagic=32-bit;;
- *-n32|*"-n32 "|*-melf32bmipn32|*"-melf32bmipn32 ")
- libsuff=32 shlibsuff=N32 libmagic=N32;;
- *-64|*"-64 "|*-melf64bmip|*"-melf64bmip ")
- libsuff=64 shlibsuff=64 libmagic=64-bit;;
- *) libsuff= shlibsuff= libmagic=never-match;;
- esac
- ;;
- esac
- shlibpath_var=LD_LIBRARY${shlibsuff}_PATH
- shlibpath_overrides_runpath=no
- sys_lib_search_path_spec="/usr/lib${libsuff} /lib${libsuff} /usr/local/lib${libsuff}"
- sys_lib_dlsearch_path_spec="/usr/lib${libsuff} /lib${libsuff}"
- hardcode_into_libs=yes
- ;;
-
-# No shared lib support for Linux oldld, aout, or coff.
-linux*oldld* | linux*aout* | linux*coff*)
- dynamic_linker=no
- ;;
-
-# This must be Linux ELF.
-linux* | k*bsd*-gnu)
- version_type=linux
- need_lib_prefix=no
- need_version=no
- library_names_spec='${libname}${release}${shared_ext}$versuffix ${libname}${release}${shared_ext}$major $libname${shared_ext}'
- soname_spec='${libname}${release}${shared_ext}$major'
- finish_cmds='PATH="\$PATH:/sbin" ldconfig -n $libdir'
- shlibpath_var=LD_LIBRARY_PATH
- shlibpath_overrides_runpath=no
- # This implies no fast_install, which is unacceptable.
- # Some rework will be needed to allow for fast_install
- # before this can be enabled.
- hardcode_into_libs=yes
-
- # Append ld.so.conf contents to the search path
- if test -f /etc/ld.so.conf; then
- lt_ld_extra=`awk '/^include / { system(sprintf("cd /etc; cat %s 2>/dev/null", \$2)); skip = 1; } { if (!skip) print \$0; skip = 0; }' < /etc/ld.so.conf | $SED -e 's/#.*//;/^[ ]*hwcap[ ]/d;s/[:, ]/ /g;s/=[^=]*$//;s/=[^= ]* / /g;/^$/d' | tr '\n' ' '`
- sys_lib_dlsearch_path_spec="/lib /usr/lib $lt_ld_extra"
- fi
-
- # We used to test for /lib/ld.so.1 and disable shared libraries on
- # powerpc, because MkLinux only supported shared libraries with the
- # GNU dynamic linker. Since this was broken with cross compilers,
- # most powerpc-linux boxes support dynamic linking these days and
- # people can always --disable-shared, the test was removed, and we
- # assume the GNU/Linux dynamic linker is in use.
- dynamic_linker='GNU/Linux ld.so'
- ;;
-
-netbsd*)
- version_type=sunos
- need_lib_prefix=no
- need_version=no
- if echo __ELF__ | $CC -E - | grep __ELF__ >/dev/null; then
- library_names_spec='${libname}${release}${shared_ext}$versuffix ${libname}${shared_ext}$versuffix'
- finish_cmds='PATH="\$PATH:/sbin" ldconfig -m $libdir'
- dynamic_linker='NetBSD (a.out) ld.so'
- else
- library_names_spec='${libname}${release}${shared_ext}$versuffix ${libname}${release}${shared_ext}$major ${libname}${shared_ext}'
- soname_spec='${libname}${release}${shared_ext}$major'
- dynamic_linker='NetBSD ld.elf_so'
- fi
- shlibpath_var=LD_LIBRARY_PATH
- shlibpath_overrides_runpath=yes
- hardcode_into_libs=yes
- ;;
-
-newsos6)
- version_type=linux
- library_names_spec='${libname}${release}${shared_ext}$versuffix ${libname}${release}${shared_ext}$major $libname${shared_ext}'
- shlibpath_var=LD_LIBRARY_PATH
- shlibpath_overrides_runpath=yes
- ;;
-
-nto-qnx*)
- version_type=linux
- need_lib_prefix=no
- need_version=no
- library_names_spec='${libname}${release}${shared_ext}$versuffix ${libname}${release}${shared_ext}$major $libname${shared_ext}'
- soname_spec='${libname}${release}${shared_ext}$major'
- shlibpath_var=LD_LIBRARY_PATH
- shlibpath_overrides_runpath=yes
- ;;
-
-openbsd*)
- version_type=sunos
- sys_lib_dlsearch_path_spec="/usr/lib"
- need_lib_prefix=no
- # Some older versions of OpenBSD (3.3 at least) *do* need versioned libs.
- case $host_os in
- openbsd3.3 | openbsd3.3.*) need_version=yes ;;
- *) need_version=no ;;
- esac
- library_names_spec='${libname}${release}${shared_ext}$versuffix ${libname}${shared_ext}$versuffix'
- finish_cmds='PATH="\$PATH:/sbin" ldconfig -m $libdir'
- shlibpath_var=LD_LIBRARY_PATH
- if test -z "`echo __ELF__ | $CC -E - | grep __ELF__`" || test "$host_os-$host_cpu" = "openbsd2.8-powerpc"; then
- case $host_os in
- openbsd2.[89] | openbsd2.[89].*)
- shlibpath_overrides_runpath=no
- ;;
- *)
- shlibpath_overrides_runpath=yes
- ;;
- esac
- else
- shlibpath_overrides_runpath=yes
- fi
- ;;
-
-os2*)
- libname_spec='$name'
- shrext_cmds=".dll"
- need_lib_prefix=no
- library_names_spec='$libname${shared_ext} $libname.a'
- dynamic_linker='OS/2 ld.exe'
- shlibpath_var=LIBPATH
- ;;
-
-osf3* | osf4* | osf5*)
- version_type=osf
- need_lib_prefix=no
- need_version=no
- soname_spec='${libname}${release}${shared_ext}$major'
- library_names_spec='${libname}${release}${shared_ext}$versuffix ${libname}${release}${shared_ext}$major $libname${shared_ext}'
- shlibpath_var=LD_LIBRARY_PATH
- sys_lib_search_path_spec="/usr/shlib /usr/ccs/lib /usr/lib/cmplrs/cc /usr/lib /usr/local/lib /var/shlib"
- sys_lib_dlsearch_path_spec="$sys_lib_search_path_spec"
- ;;
-
-rdos*)
- dynamic_linker=no
- ;;
-
-solaris*)
- version_type=linux
- need_lib_prefix=no
- need_version=no
- library_names_spec='${libname}${release}${shared_ext}$versuffix ${libname}${release}${shared_ext}$major $libname${shared_ext}'
- soname_spec='${libname}${release}${shared_ext}$major'
- shlibpath_var=LD_LIBRARY_PATH
- shlibpath_overrides_runpath=yes
- hardcode_into_libs=yes
- # ldd complains unless libraries are executable
- postinstall_cmds='chmod +x $lib'
- ;;
-
-sunos4*)
- version_type=sunos
- library_names_spec='${libname}${release}${shared_ext}$versuffix ${libname}${shared_ext}$versuffix'
- finish_cmds='PATH="\$PATH:/usr/etc" ldconfig $libdir'
- shlibpath_var=LD_LIBRARY_PATH
- shlibpath_overrides_runpath=yes
- if test "$with_gnu_ld" = yes; then
- need_lib_prefix=no
- fi
- need_version=yes
- ;;
-
-sysv4 | sysv4.3*)
- version_type=linux
- library_names_spec='${libname}${release}${shared_ext}$versuffix ${libname}${release}${shared_ext}$major $libname${shared_ext}'
- soname_spec='${libname}${release}${shared_ext}$major'
- shlibpath_var=LD_LIBRARY_PATH
- case $host_vendor in
- sni)
- shlibpath_overrides_runpath=no
- need_lib_prefix=no
- export_dynamic_flag_spec='${wl}-Blargedynsym'
- runpath_var=LD_RUN_PATH
- ;;
- siemens)
- need_lib_prefix=no
- ;;
- motorola)
- need_lib_prefix=no
- need_version=no
- shlibpath_overrides_runpath=no
- sys_lib_search_path_spec='/lib /usr/lib /usr/ccs/lib'
- ;;
- esac
- ;;
-
-sysv4*MP*)
- if test -d /usr/nec ;then
- version_type=linux
- library_names_spec='$libname${shared_ext}.$versuffix $libname${shared_ext}.$major $libname${shared_ext}'
- soname_spec='$libname${shared_ext}.$major'
- shlibpath_var=LD_LIBRARY_PATH
- fi
- ;;
-
-sysv5* | sco3.2v5* | sco5v6* | unixware* | OpenUNIX* | sysv4*uw2*)
- version_type=freebsd-elf
- need_lib_prefix=no
- need_version=no
- library_names_spec='${libname}${release}${shared_ext}$versuffix ${libname}${release}${shared_ext} $libname${shared_ext}'
- soname_spec='${libname}${release}${shared_ext}$major'
- shlibpath_var=LD_LIBRARY_PATH
- hardcode_into_libs=yes
- if test "$with_gnu_ld" = yes; then
- sys_lib_search_path_spec='/usr/local/lib /usr/gnu/lib /usr/ccs/lib /usr/lib /lib'
- shlibpath_overrides_runpath=no
- else
- sys_lib_search_path_spec='/usr/ccs/lib /usr/lib'
- shlibpath_overrides_runpath=yes
- case $host_os in
- sco3.2v5*)
- sys_lib_search_path_spec="$sys_lib_search_path_spec /lib"
- ;;
- esac
- fi
- sys_lib_dlsearch_path_spec='/usr/lib'
- ;;
-
-uts4*)
- version_type=linux
- library_names_spec='${libname}${release}${shared_ext}$versuffix ${libname}${release}${shared_ext}$major $libname${shared_ext}'
- soname_spec='${libname}${release}${shared_ext}$major'
- shlibpath_var=LD_LIBRARY_PATH
- ;;
-
-*)
- dynamic_linker=no
- ;;
-esac
-{ $as_echo "$as_me:$LINENO: result: $dynamic_linker" >&5
-$as_echo "$dynamic_linker" >&6; }
-test "$dynamic_linker" = no && can_build_shared=no
-
-if test "${lt_cv_sys_lib_search_path_spec+set}" = set; then
- $as_echo_n "(cached) " >&6
-else
- lt_cv_sys_lib_search_path_spec="$sys_lib_search_path_spec"
-fi
-
-sys_lib_search_path_spec="$lt_cv_sys_lib_search_path_spec"
-if test "${lt_cv_sys_lib_dlsearch_path_spec+set}" = set; then
- $as_echo_n "(cached) " >&6
-else
- lt_cv_sys_lib_dlsearch_path_spec="$sys_lib_dlsearch_path_spec"
-fi
-
-sys_lib_dlsearch_path_spec="$lt_cv_sys_lib_dlsearch_path_spec"
-
-variables_saved_for_relink="PATH $shlibpath_var $runpath_var"
-if test "$GCC" = yes; then
- variables_saved_for_relink="$variables_saved_for_relink GCC_EXEC_PREFIX COMPILER_PATH LIBRARY_PATH"
-fi
-
-{ $as_echo "$as_me:$LINENO: checking how to hardcode library paths into programs" >&5
-$as_echo_n "checking how to hardcode library paths into programs... " >&6; }
-hardcode_action_F77=
-if test -n "$hardcode_libdir_flag_spec_F77" || \
- test -n "$runpath_var_F77" || \
- test "X$hardcode_automatic_F77" = "Xyes" ; then
-
- # We can hardcode non-existant directories.
- if test "$hardcode_direct_F77" != no &&
- # If the only mechanism to avoid hardcoding is shlibpath_var, we
- # have to relink, otherwise we might link with an installed library
- # when we should be linking with a yet-to-be-installed one
- ## test "$_LT_AC_TAGVAR(hardcode_shlibpath_var, F77)" != no &&
- test "$hardcode_minus_L_F77" != no; then
- # Linking always hardcodes the temporary library directory.
- hardcode_action_F77=relink
- else
- # We can link without hardcoding, and we can hardcode nonexisting dirs.
- hardcode_action_F77=immediate
- fi
-else
- # We cannot hardcode anything, or else we can only hardcode existing
- # directories.
- hardcode_action_F77=unsupported
-fi
-{ $as_echo "$as_me:$LINENO: result: $hardcode_action_F77" >&5
-$as_echo "$hardcode_action_F77" >&6; }
-
-if test "$hardcode_action_F77" = relink; then
- # Fast installation is not supported
- enable_fast_install=no
-elif test "$shlibpath_overrides_runpath" = yes ||
- test "$enable_shared" = no; then
- # Fast installation is not necessary
- enable_fast_install=needless
-fi
-
-
-# The else clause should only fire when bootstrapping the
-# libtool distribution, otherwise you forgot to ship ltmain.sh
-# with your package, and you will get complaints that there are
-# no rules to generate ltmain.sh.
-if test -f "$ltmain"; then
- # See if we are running on zsh, and set the options which allow our commands through
- # without removal of \ escapes.
- if test -n "${ZSH_VERSION+set}" ; then
- setopt NO_GLOB_SUBST
- fi
- # Now quote all the things that may contain metacharacters while being
- # careful not to overquote the AC_SUBSTed values. We take copies of the
- # variables and quote the copies for generation of the libtool script.
- for var in echo old_CC old_CFLAGS AR AR_FLAGS EGREP RANLIB LN_S LTCC LTCFLAGS NM \
- SED SHELL STRIP \
- libname_spec library_names_spec soname_spec extract_expsyms_cmds \
- old_striplib striplib file_magic_cmd finish_cmds finish_eval \
- deplibs_check_method reload_flag reload_cmds need_locks \
- lt_cv_sys_global_symbol_pipe lt_cv_sys_global_symbol_to_cdecl \
- lt_cv_sys_global_symbol_to_c_name_address \
- sys_lib_search_path_spec sys_lib_dlsearch_path_spec \
- old_postinstall_cmds old_postuninstall_cmds \
- compiler_F77 \
- CC_F77 \
- LD_F77 \
- lt_prog_compiler_wl_F77 \
- lt_prog_compiler_pic_F77 \
- lt_prog_compiler_static_F77 \
- lt_prog_compiler_no_builtin_flag_F77 \
- export_dynamic_flag_spec_F77 \
- thread_safe_flag_spec_F77 \
- whole_archive_flag_spec_F77 \
- enable_shared_with_static_runtimes_F77 \
- old_archive_cmds_F77 \
- old_archive_from_new_cmds_F77 \
- predep_objects_F77 \
- postdep_objects_F77 \
- predeps_F77 \
- postdeps_F77 \
- compiler_lib_search_path_F77 \
- compiler_lib_search_dirs_F77 \
- archive_cmds_F77 \
- archive_expsym_cmds_F77 \
- postinstall_cmds_F77 \
- postuninstall_cmds_F77 \
- old_archive_from_expsyms_cmds_F77 \
- allow_undefined_flag_F77 \
- no_undefined_flag_F77 \
- export_symbols_cmds_F77 \
- hardcode_libdir_flag_spec_F77 \
- hardcode_libdir_flag_spec_ld_F77 \
- hardcode_libdir_separator_F77 \
- hardcode_automatic_F77 \
- module_cmds_F77 \
- module_expsym_cmds_F77 \
- lt_cv_prog_compiler_c_o_F77 \
- fix_srcfile_path_F77 \
- exclude_expsyms_F77 \
- include_expsyms_F77; do
-
- case $var in
- old_archive_cmds_F77 | \
- old_archive_from_new_cmds_F77 | \
- archive_cmds_F77 | \
- archive_expsym_cmds_F77 | \
- module_cmds_F77 | \
- module_expsym_cmds_F77 | \
- old_archive_from_expsyms_cmds_F77 | \
- export_symbols_cmds_F77 | \
- extract_expsyms_cmds | reload_cmds | finish_cmds | \
- postinstall_cmds | postuninstall_cmds | \
- old_postinstall_cmds | old_postuninstall_cmds | \
- sys_lib_search_path_spec | sys_lib_dlsearch_path_spec)
- # Double-quote double-evaled strings.
- eval "lt_$var=\\\"\`\$echo \"X\$$var\" | \$Xsed -e \"\$double_quote_subst\" -e \"\$sed_quote_subst\" -e \"\$delay_variable_subst\"\`\\\""
- ;;
- *)
- eval "lt_$var=\\\"\`\$echo \"X\$$var\" | \$Xsed -e \"\$sed_quote_subst\"\`\\\""
- ;;
- esac
- done
-
- case $lt_echo in
- *'\$0 --fallback-echo"')
- lt_echo=`$echo "X$lt_echo" | $Xsed -e 's/\\\\\\\$0 --fallback-echo"$/$0 --fallback-echo"/'`
- ;;
- esac
-
-cfgfile="$ofile"
-
- cat <<__EOF__ >> "$cfgfile"
-# ### BEGIN LIBTOOL TAG CONFIG: $tagname
-
-# Libtool was configured on host `(hostname || uname -n) 2>/dev/null | sed 1q`:
-
-# Shell to use when invoking shell scripts.
-SHELL=$lt_SHELL
-
-# Whether or not to build shared libraries.
-build_libtool_libs=$enable_shared
-
-# Whether or not to build static libraries.
-build_old_libs=$enable_static
-
-# Whether or not to add -lc for building shared libraries.
-build_libtool_need_lc=$archive_cmds_need_lc_F77
-
-# Whether or not to disallow shared libs when runtime libs are static
-allow_libtool_libs_with_static_runtimes=$enable_shared_with_static_runtimes_F77
-
-# Whether or not to optimize for fast installation.
-fast_install=$enable_fast_install
-
-# The host system.
-host_alias=$host_alias
-host=$host
-host_os=$host_os
-
-# The build system.
-build_alias=$build_alias
-build=$build
-build_os=$build_os
-
-# An echo program that does not interpret backslashes.
-echo=$lt_echo
-
-# The archiver.
-AR=$lt_AR
-AR_FLAGS=$lt_AR_FLAGS
-
-# A C compiler.
-LTCC=$lt_LTCC
-
-# LTCC compiler flags.
-LTCFLAGS=$lt_LTCFLAGS
-
-# A language-specific compiler.
-CC=$lt_compiler_F77
-
-# Is the compiler the GNU C compiler?
-with_gcc=$GCC_F77
-
-# An ERE matcher.
-EGREP=$lt_EGREP
-
-# The linker used to build libraries.
-LD=$lt_LD_F77
-
-# Whether we need hard or soft links.
-LN_S=$lt_LN_S
-
-# A BSD-compatible nm program.
-NM=$lt_NM
-
-# A symbol stripping program
-STRIP=$lt_STRIP
-
-# Used to examine libraries when file_magic_cmd begins "file"
-MAGIC_CMD=$MAGIC_CMD
-
-# Used on cygwin: DLL creation program.
-DLLTOOL="$DLLTOOL"
-
-# Used on cygwin: object dumper.
-OBJDUMP="$OBJDUMP"
-
-# Used on cygwin: assembler.
-AS="$AS"
-
-# The name of the directory that contains temporary libtool files.
-objdir=$objdir
-
-# How to create reloadable object files.
-reload_flag=$lt_reload_flag
-reload_cmds=$lt_reload_cmds
-
-# How to pass a linker flag through the compiler.
-wl=$lt_lt_prog_compiler_wl_F77
-
-# Object file suffix (normally "o").
-objext="$ac_objext"
-
-# Old archive suffix (normally "a").
-libext="$libext"
-
-# Shared library suffix (normally ".so").
-shrext_cmds='$shrext_cmds'
-
-# Executable file suffix (normally "").
-exeext="$exeext"
-
-# Additional compiler flags for building library objects.
-pic_flag=$lt_lt_prog_compiler_pic_F77
-pic_mode=$pic_mode
-
-# What is the maximum length of a command?
-max_cmd_len=$lt_cv_sys_max_cmd_len
-
-# Does compiler simultaneously support -c and -o options?
-compiler_c_o=$lt_lt_cv_prog_compiler_c_o_F77
-
-# Must we lock files when doing compilation?
-need_locks=$lt_need_locks
-
-# Do we need the lib prefix for modules?
-need_lib_prefix=$need_lib_prefix
-
-# Do we need a version for libraries?
-need_version=$need_version
-
-# Whether dlopen is supported.
-dlopen_support=$enable_dlopen
-
-# Whether dlopen of programs is supported.
-dlopen_self=$enable_dlopen_self
-
-# Whether dlopen of statically linked programs is supported.
-dlopen_self_static=$enable_dlopen_self_static
-
-# Compiler flag to prevent dynamic linking.
-link_static_flag=$lt_lt_prog_compiler_static_F77
-
-# Compiler flag to turn off builtin functions.
-no_builtin_flag=$lt_lt_prog_compiler_no_builtin_flag_F77
-
-# Compiler flag to allow reflexive dlopens.
-export_dynamic_flag_spec=$lt_export_dynamic_flag_spec_F77
-
-# Compiler flag to generate shared objects directly from archives.
-whole_archive_flag_spec=$lt_whole_archive_flag_spec_F77
-
-# Compiler flag to generate thread-safe objects.
-thread_safe_flag_spec=$lt_thread_safe_flag_spec_F77
-
-# Library versioning type.
-version_type=$version_type
-
-# Format of library name prefix.
-libname_spec=$lt_libname_spec
-
-# List of archive names. First name is the real one, the rest are links.
-# The last name is the one that the linker finds with -lNAME.
-library_names_spec=$lt_library_names_spec
-
-# The coded name of the library, if different from the real name.
-soname_spec=$lt_soname_spec
-
-# Commands used to build and install an old-style archive.
-RANLIB=$lt_RANLIB
-old_archive_cmds=$lt_old_archive_cmds_F77
-old_postinstall_cmds=$lt_old_postinstall_cmds
-old_postuninstall_cmds=$lt_old_postuninstall_cmds
-
-# Create an old-style archive from a shared archive.
-old_archive_from_new_cmds=$lt_old_archive_from_new_cmds_F77
-
-# Create a temporary old-style archive to link instead of a shared archive.
-old_archive_from_expsyms_cmds=$lt_old_archive_from_expsyms_cmds_F77
-
-# Commands used to build and install a shared archive.
-archive_cmds=$lt_archive_cmds_F77
-archive_expsym_cmds=$lt_archive_expsym_cmds_F77
-postinstall_cmds=$lt_postinstall_cmds
-postuninstall_cmds=$lt_postuninstall_cmds
-
-# Commands used to build a loadable module (assumed same as above if empty)
-module_cmds=$lt_module_cmds_F77
-module_expsym_cmds=$lt_module_expsym_cmds_F77
-
-# Commands to strip libraries.
-old_striplib=$lt_old_striplib
-striplib=$lt_striplib
-
-# Dependencies to place before the objects being linked to create a
-# shared library.
-predep_objects=$lt_predep_objects_F77
-
-# Dependencies to place after the objects being linked to create a
-# shared library.
-postdep_objects=$lt_postdep_objects_F77
-
-# Dependencies to place before the objects being linked to create a
-# shared library.
-predeps=$lt_predeps_F77
-
-# Dependencies to place after the objects being linked to create a
-# shared library.
-postdeps=$lt_postdeps_F77
-
-# The directories searched by this compiler when creating a shared
-# library
-compiler_lib_search_dirs=$lt_compiler_lib_search_dirs_F77
-
-# The library search path used internally by the compiler when linking
-# a shared library.
-compiler_lib_search_path=$lt_compiler_lib_search_path_F77
-
-# Method to check whether dependent libraries are shared objects.
-deplibs_check_method=$lt_deplibs_check_method
-
-# Command to use when deplibs_check_method == file_magic.
-file_magic_cmd=$lt_file_magic_cmd
-
-# Flag that allows shared libraries with undefined symbols to be built.
-allow_undefined_flag=$lt_allow_undefined_flag_F77
-
-# Flag that forces no undefined symbols.
-no_undefined_flag=$lt_no_undefined_flag_F77
-
-# Commands used to finish a libtool library installation in a directory.
-finish_cmds=$lt_finish_cmds
-
-# Same as above, but a single script fragment to be evaled but not shown.
-finish_eval=$lt_finish_eval
-
-# Take the output of nm and produce a listing of raw symbols and C names.
-global_symbol_pipe=$lt_lt_cv_sys_global_symbol_pipe
-
-# Transform the output of nm in a proper C declaration
-global_symbol_to_cdecl=$lt_lt_cv_sys_global_symbol_to_cdecl
-
-# Transform the output of nm in a C name address pair
-global_symbol_to_c_name_address=$lt_lt_cv_sys_global_symbol_to_c_name_address
-
-# This is the shared library runtime path variable.
-runpath_var=$runpath_var
-
-# This is the shared library path variable.
-shlibpath_var=$shlibpath_var
-
-# Is shlibpath searched before the hard-coded library search path?
-shlibpath_overrides_runpath=$shlibpath_overrides_runpath
-
-# How to hardcode a shared library path into an executable.
-hardcode_action=$hardcode_action_F77
-
-# Whether we should hardcode library paths into libraries.
-hardcode_into_libs=$hardcode_into_libs
-
-# Flag to hardcode \$libdir into a binary during linking.
-# This must work even if \$libdir does not exist.
-hardcode_libdir_flag_spec=$lt_hardcode_libdir_flag_spec_F77
-
-# If ld is used when linking, flag to hardcode \$libdir into
-# a binary during linking. This must work even if \$libdir does
-# not exist.
-hardcode_libdir_flag_spec_ld=$lt_hardcode_libdir_flag_spec_ld_F77
-
-# Whether we need a single -rpath flag with a separated argument.
-hardcode_libdir_separator=$lt_hardcode_libdir_separator_F77
-
-# Set to yes if using DIR/libNAME${shared_ext} during linking hardcodes DIR into the
-# resulting binary.
-hardcode_direct=$hardcode_direct_F77
-
-# Set to yes if using the -LDIR flag during linking hardcodes DIR into the
-# resulting binary.
-hardcode_minus_L=$hardcode_minus_L_F77
-
-# Set to yes if using SHLIBPATH_VAR=DIR during linking hardcodes DIR into
-# the resulting binary.
-hardcode_shlibpath_var=$hardcode_shlibpath_var_F77
-
-# Set to yes if building a shared library automatically hardcodes DIR into the library
-# and all subsequent libraries and executables linked against it.
-hardcode_automatic=$hardcode_automatic_F77
-
-# Variables whose values should be saved in libtool wrapper scripts and
-# restored at relink time.
-variables_saved_for_relink="$variables_saved_for_relink"
-
-# Whether libtool must link a program against all its dependency libraries.
-link_all_deplibs=$link_all_deplibs_F77
-
-# Compile-time system search path for libraries
-sys_lib_search_path_spec=$lt_sys_lib_search_path_spec
-
-# Run-time system search path for libraries
-sys_lib_dlsearch_path_spec=$lt_sys_lib_dlsearch_path_spec
-
-# Fix the shell variable \$srcfile for the compiler.
-fix_srcfile_path=$lt_fix_srcfile_path
-
-# Set to yes if exported symbols are required.
-always_export_symbols=$always_export_symbols_F77
-
-# The commands to list exported symbols.
-export_symbols_cmds=$lt_export_symbols_cmds_F77
-
-# The commands to extract the exported symbol list from a shared archive.
-extract_expsyms_cmds=$lt_extract_expsyms_cmds
-
-# Symbols that should not be listed in the preloaded symbols.
-exclude_expsyms=$lt_exclude_expsyms_F77
-
-# Symbols that must always be exported.
-include_expsyms=$lt_include_expsyms_F77
-
-# ### END LIBTOOL TAG CONFIG: $tagname
-
-__EOF__
-
-
-else
- # If there is no Makefile yet, we rely on a make rule to execute
- # `config.status --recheck' to rerun these tests and create the
- # libtool script then.
- ltmain_in=`echo $ltmain | sed -e 's/\.sh$/.in/'`
- if test -f "$ltmain_in"; then
- test -f Makefile && make "$ltmain"
- fi
-fi
-
-
-ac_ext=c
-ac_cpp='$CPP $CPPFLAGS'
-ac_compile='$CC -c $CFLAGS $CPPFLAGS conftest.$ac_ext >&5'
-ac_link='$CC -o conftest$ac_exeext $CFLAGS $CPPFLAGS $LDFLAGS conftest.$ac_ext $LIBS >&5'
-ac_compiler_gnu=$ac_cv_c_compiler_gnu
-
-CC="$lt_save_CC"
-
- else
- tagname=""
- fi
- ;;
-
- GCJ)
- if test -n "$GCJ" && test "X$GCJ" != "Xno"; then
-
-
-# Source file extension for Java test sources.
-ac_ext=java
-
-# Object file extension for compiled Java test sources.
-objext=o
-objext_GCJ=$objext
-
-# Code to be used in simple compile tests
-lt_simple_compile_test_code="class foo {}"
-
-# Code to be used in simple link tests
-lt_simple_link_test_code='public class conftest { public static void main(String[] argv) {}; }'
-
-# ltmain only uses $CC for tagged configurations so make sure $CC is set.
-
-# If no C compiler was specified, use CC.
-LTCC=${LTCC-"$CC"}
-
-# If no C compiler flags were specified, use CFLAGS.
-LTCFLAGS=${LTCFLAGS-"$CFLAGS"}
-
-# Allow CC to be a program name with arguments.
-compiler=$CC
-
-
-# save warnings/boilerplate of simple test code
-ac_outfile=conftest.$ac_objext
-echo "$lt_simple_compile_test_code" >conftest.$ac_ext
-eval "$ac_compile" 2>&1 >/dev/null | $SED '/^$/d; /^ *+/d' >conftest.err
-_lt_compiler_boilerplate=`cat conftest.err`
-$rm conftest*
-
-ac_outfile=conftest.$ac_objext
-echo "$lt_simple_link_test_code" >conftest.$ac_ext
-eval "$ac_link" 2>&1 >/dev/null | $SED '/^$/d; /^ *+/d' >conftest.err
-_lt_linker_boilerplate=`cat conftest.err`
-$rm -r conftest*
-
-
-# Allow CC to be a program name with arguments.
-lt_save_CC="$CC"
-CC=${GCJ-"gcj"}
-compiler=$CC
-compiler_GCJ=$CC
-for cc_temp in $compiler""; do
- case $cc_temp in
- compile | *[\\/]compile | ccache | *[\\/]ccache ) ;;
- distcc | *[\\/]distcc | purify | *[\\/]purify ) ;;
- \-*) ;;
- *) break;;
- esac
-done
-cc_basename=`$echo "X$cc_temp" | $Xsed -e 's%.*/%%' -e "s%^$host_alias-%%"`
-
-
-# GCJ did not exist at the time GCC didn't implicitly link libc in.
-archive_cmds_need_lc_GCJ=no
-
-old_archive_cmds_GCJ=$old_archive_cmds
-
-
-lt_prog_compiler_no_builtin_flag_GCJ=
-
-if test "$GCC" = yes; then
- lt_prog_compiler_no_builtin_flag_GCJ=' -fno-builtin'
-
-
-{ $as_echo "$as_me:$LINENO: checking if $compiler supports -fno-rtti -fno-exceptions" >&5
-$as_echo_n "checking if $compiler supports -fno-rtti -fno-exceptions... " >&6; }
-if test "${lt_cv_prog_compiler_rtti_exceptions+set}" = set; then
- $as_echo_n "(cached) " >&6
-else
- lt_cv_prog_compiler_rtti_exceptions=no
- ac_outfile=conftest.$ac_objext
- echo "$lt_simple_compile_test_code" > conftest.$ac_ext
- lt_compiler_flag="-fno-rtti -fno-exceptions"
- # Insert the option either (1) after the last *FLAGS variable, or
- # (2) before a word containing "conftest.", or (3) at the end.
- # Note that $ac_compile itself does not contain backslashes and begins
- # with a dollar sign (not a hyphen), so the echo should work correctly.
- # The option is referenced via a variable to avoid confusing sed.
- lt_compile=`echo "$ac_compile" | $SED \
- -e 's:.*FLAGS}\{0,1\} :&$lt_compiler_flag :; t' \
- -e 's: [^ ]*conftest\.: $lt_compiler_flag&:; t' \
- -e 's:$: $lt_compiler_flag:'`
- (eval echo "\"\$as_me:19236: $lt_compile\"" >&5)
- (eval "$lt_compile" 2>conftest.err)
- ac_status=$?
- cat conftest.err >&5
- echo "$as_me:19240: \$? = $ac_status" >&5
- if (exit $ac_status) && test -s "$ac_outfile"; then
- # The compiler can only warn and ignore the option if not recognized
- # So say no if there are warnings other than the usual output.
- $echo "X$_lt_compiler_boilerplate" | $Xsed -e '/^$/d' >conftest.exp
- $SED '/^$/d; /^ *+/d' conftest.err >conftest.er2
- if test ! -s conftest.er2 || diff conftest.exp conftest.er2 >/dev/null; then
- lt_cv_prog_compiler_rtti_exceptions=yes
- fi
- fi
- $rm conftest*
-
-fi
-{ $as_echo "$as_me:$LINENO: result: $lt_cv_prog_compiler_rtti_exceptions" >&5
-$as_echo "$lt_cv_prog_compiler_rtti_exceptions" >&6; }
-
-if test x"$lt_cv_prog_compiler_rtti_exceptions" = xyes; then
- lt_prog_compiler_no_builtin_flag_GCJ="$lt_prog_compiler_no_builtin_flag_GCJ -fno-rtti -fno-exceptions"
-else
- :
-fi
-
-fi
-
-lt_prog_compiler_wl_GCJ=
-lt_prog_compiler_pic_GCJ=
-lt_prog_compiler_static_GCJ=
-
-{ $as_echo "$as_me:$LINENO: checking for $compiler option to produce PIC" >&5
-$as_echo_n "checking for $compiler option to produce PIC... " >&6; }
-
- if test "$GCC" = yes; then
- lt_prog_compiler_wl_GCJ='-Wl,'
- lt_prog_compiler_static_GCJ='-static'
-
- case $host_os in
- aix*)
- # All AIX code is PIC.
- if test "$host_cpu" = ia64; then
- # AIX 5 now supports IA64 processor
- lt_prog_compiler_static_GCJ='-Bstatic'
- fi
- ;;
-
- amigaos*)
- # FIXME: we need at least 68020 code to build shared libraries, but
- # adding the `-m68020' flag to GCC prevents building anything better,
- # like `-m68040'.
- lt_prog_compiler_pic_GCJ='-m68020 -resident32 -malways-restore-a4'
- ;;
-
- beos* | irix5* | irix6* | nonstopux* | osf3* | osf4* | osf5*)
- # PIC is the default for these OSes.
- ;;
-
- mingw* | cygwin* | pw32* | os2*)
- # This hack is so that the source file can tell whether it is being
- # built for inclusion in a dll (and should export symbols for example).
- # Although the cygwin gcc ignores -fPIC, still need this for old-style
- # (--disable-auto-import) libraries
-
- ;;
-
- darwin* | rhapsody*)
- # PIC is the default on this platform
- # Common symbols not allowed in MH_DYLIB files
- lt_prog_compiler_pic_GCJ='-fno-common'
- ;;
-
- interix[3-9]*)
- # Interix 3.x gcc -fpic/-fPIC options generate broken code.
- # Instead, we relocate shared libraries at runtime.
- ;;
-
- msdosdjgpp*)
- # Just because we use GCC doesn't mean we suddenly get shared libraries
- # on systems that don't support them.
- lt_prog_compiler_can_build_shared_GCJ=no
- enable_shared=no
- ;;
-
- sysv4*MP*)
- if test -d /usr/nec; then
- lt_prog_compiler_pic_GCJ=-Kconform_pic
- fi
- ;;
-
- hpux*)
- # PIC is the default for IA64 HP-UX and 64-bit HP-UX, but
- # not for PA HP-UX.
- case $host_cpu in
- hppa*64*|ia64*)
- # +Z the default
- ;;
- *)
- lt_prog_compiler_pic_GCJ='-fPIC'
- ;;
- esac
- ;;
-
- *)
- lt_prog_compiler_pic_GCJ='-fPIC'
- ;;
- esac
- else
- # PORTME Check for flag to pass linker flags through the system compiler.
- case $host_os in
- aix*)
- lt_prog_compiler_wl_GCJ='-Wl,'
- if test "$host_cpu" = ia64; then
- # AIX 5 now supports IA64 processor
- lt_prog_compiler_static_GCJ='-Bstatic'
- else
- lt_prog_compiler_static_GCJ='-bnso -bI:/lib/syscalls.exp'
- fi
- ;;
- darwin*)
- # PIC is the default on this platform
- # Common symbols not allowed in MH_DYLIB files
- case $cc_basename in
- xlc*)
- lt_prog_compiler_pic_GCJ='-qnocommon'
- lt_prog_compiler_wl_GCJ='-Wl,'
- ;;
- esac
- ;;
-
- mingw* | cygwin* | pw32* | os2*)
- # This hack is so that the source file can tell whether it is being
- # built for inclusion in a dll (and should export symbols for example).
-
- ;;
-
- hpux9* | hpux10* | hpux11*)
- lt_prog_compiler_wl_GCJ='-Wl,'
- # PIC is the default for IA64 HP-UX and 64-bit HP-UX, but
- # not for PA HP-UX.
- case $host_cpu in
- hppa*64*|ia64*)
- # +Z the default
- ;;
- *)
- lt_prog_compiler_pic_GCJ='+Z'
- ;;
- esac
- # Is there a better lt_prog_compiler_static that works with the bundled CC?
- lt_prog_compiler_static_GCJ='${wl}-a ${wl}archive'
- ;;
-
- irix5* | irix6* | nonstopux*)
- lt_prog_compiler_wl_GCJ='-Wl,'
- # PIC (with -KPIC) is the default.
- lt_prog_compiler_static_GCJ='-non_shared'
- ;;
-
- newsos6)
- lt_prog_compiler_pic_GCJ='-KPIC'
- lt_prog_compiler_static_GCJ='-Bstatic'
- ;;
-
- linux* | k*bsd*-gnu)
- case $cc_basename in
- icc* | ecc*)
- lt_prog_compiler_wl_GCJ='-Wl,'
- lt_prog_compiler_pic_GCJ='-KPIC'
- lt_prog_compiler_static_GCJ='-static'
- ;;
- pgcc* | pgf77* | pgf90* | pgf95*)
- # Portland Group compilers (*not* the Pentium gcc compiler,
- # which looks to be a dead project)
- lt_prog_compiler_wl_GCJ='-Wl,'
- lt_prog_compiler_pic_GCJ='-fpic'
- lt_prog_compiler_static_GCJ='-Bstatic'
- ;;
- ccc*)
- lt_prog_compiler_wl_GCJ='-Wl,'
- # All Alpha code is PIC.
- lt_prog_compiler_static_GCJ='-non_shared'
- ;;
- *)
- case `$CC -V 2>&1 | sed 5q` in
- *Sun\ C*)
- # Sun C 5.9
- lt_prog_compiler_pic_GCJ='-KPIC'
- lt_prog_compiler_static_GCJ='-Bstatic'
- lt_prog_compiler_wl_GCJ='-Wl,'
- ;;
- *Sun\ F*)
- # Sun Fortran 8.3 passes all unrecognized flags to the linker
- lt_prog_compiler_pic_GCJ='-KPIC'
- lt_prog_compiler_static_GCJ='-Bstatic'
- lt_prog_compiler_wl_GCJ=''
- ;;
- esac
- ;;
- esac
- ;;
-
- osf3* | osf4* | osf5*)
- lt_prog_compiler_wl_GCJ='-Wl,'
- # All OSF/1 code is PIC.
- lt_prog_compiler_static_GCJ='-non_shared'
- ;;
-
- rdos*)
- lt_prog_compiler_static_GCJ='-non_shared'
- ;;
-
- solaris*)
- lt_prog_compiler_pic_GCJ='-KPIC'
- lt_prog_compiler_static_GCJ='-Bstatic'
- case $cc_basename in
- f77* | f90* | f95*)
- lt_prog_compiler_wl_GCJ='-Qoption ld ';;
- *)
- lt_prog_compiler_wl_GCJ='-Wl,';;
- esac
- ;;
-
- sunos4*)
- lt_prog_compiler_wl_GCJ='-Qoption ld '
- lt_prog_compiler_pic_GCJ='-PIC'
- lt_prog_compiler_static_GCJ='-Bstatic'
- ;;
-
- sysv4 | sysv4.2uw2* | sysv4.3*)
- lt_prog_compiler_wl_GCJ='-Wl,'
- lt_prog_compiler_pic_GCJ='-KPIC'
- lt_prog_compiler_static_GCJ='-Bstatic'
- ;;
-
- sysv4*MP*)
- if test -d /usr/nec ;then
- lt_prog_compiler_pic_GCJ='-Kconform_pic'
- lt_prog_compiler_static_GCJ='-Bstatic'
- fi
- ;;
-
- sysv5* | unixware* | sco3.2v5* | sco5v6* | OpenUNIX*)
- lt_prog_compiler_wl_GCJ='-Wl,'
- lt_prog_compiler_pic_GCJ='-KPIC'
- lt_prog_compiler_static_GCJ='-Bstatic'
- ;;
-
- unicos*)
- lt_prog_compiler_wl_GCJ='-Wl,'
- lt_prog_compiler_can_build_shared_GCJ=no
- ;;
-
- uts4*)
- lt_prog_compiler_pic_GCJ='-pic'
- lt_prog_compiler_static_GCJ='-Bstatic'
- ;;
-
- *)
- lt_prog_compiler_can_build_shared_GCJ=no
- ;;
- esac
- fi
-
-{ $as_echo "$as_me:$LINENO: result: $lt_prog_compiler_pic_GCJ" >&5
-$as_echo "$lt_prog_compiler_pic_GCJ" >&6; }
-
-#
-# Check to make sure the PIC flag actually works.
-#
-if test -n "$lt_prog_compiler_pic_GCJ"; then
-
-{ $as_echo "$as_me:$LINENO: checking if $compiler PIC flag $lt_prog_compiler_pic_GCJ works" >&5
-$as_echo_n "checking if $compiler PIC flag $lt_prog_compiler_pic_GCJ works... " >&6; }
-if test "${lt_cv_prog_compiler_pic_works_GCJ+set}" = set; then
- $as_echo_n "(cached) " >&6
-else
- lt_cv_prog_compiler_pic_works_GCJ=no
- ac_outfile=conftest.$ac_objext
- echo "$lt_simple_compile_test_code" > conftest.$ac_ext
- lt_compiler_flag="$lt_prog_compiler_pic_GCJ"
- # Insert the option either (1) after the last *FLAGS variable, or
- # (2) before a word containing "conftest.", or (3) at the end.
- # Note that $ac_compile itself does not contain backslashes and begins
- # with a dollar sign (not a hyphen), so the echo should work correctly.
- # The option is referenced via a variable to avoid confusing sed.
- lt_compile=`echo "$ac_compile" | $SED \
- -e 's:.*FLAGS}\{0,1\} :&$lt_compiler_flag :; t' \
- -e 's: [^ ]*conftest\.: $lt_compiler_flag&:; t' \
- -e 's:$: $lt_compiler_flag:'`
- (eval echo "\"\$as_me:19526: $lt_compile\"" >&5)
- (eval "$lt_compile" 2>conftest.err)
- ac_status=$?
- cat conftest.err >&5
- echo "$as_me:19530: \$? = $ac_status" >&5
- if (exit $ac_status) && test -s "$ac_outfile"; then
- # The compiler can only warn and ignore the option if not recognized
- # So say no if there are warnings other than the usual output.
- $echo "X$_lt_compiler_boilerplate" | $Xsed -e '/^$/d' >conftest.exp
- $SED '/^$/d; /^ *+/d' conftest.err >conftest.er2
- if test ! -s conftest.er2 || diff conftest.exp conftest.er2 >/dev/null; then
- lt_cv_prog_compiler_pic_works_GCJ=yes
- fi
- fi
- $rm conftest*
-
-fi
-{ $as_echo "$as_me:$LINENO: result: $lt_cv_prog_compiler_pic_works_GCJ" >&5
-$as_echo "$lt_cv_prog_compiler_pic_works_GCJ" >&6; }
-
-if test x"$lt_cv_prog_compiler_pic_works_GCJ" = xyes; then
- case $lt_prog_compiler_pic_GCJ in
- "" | " "*) ;;
- *) lt_prog_compiler_pic_GCJ=" $lt_prog_compiler_pic_GCJ" ;;
- esac
-else
- lt_prog_compiler_pic_GCJ=
- lt_prog_compiler_can_build_shared_GCJ=no
-fi
-
-fi
-case $host_os in
- # For platforms which do not support PIC, -DPIC is meaningless:
- *djgpp*)
- lt_prog_compiler_pic_GCJ=
- ;;
- *)
- lt_prog_compiler_pic_GCJ="$lt_prog_compiler_pic_GCJ"
- ;;
-esac
-
-#
-# Check to make sure the static flag actually works.
-#
-wl=$lt_prog_compiler_wl_GCJ eval lt_tmp_static_flag=\"$lt_prog_compiler_static_GCJ\"
-{ $as_echo "$as_me:$LINENO: checking if $compiler static flag $lt_tmp_static_flag works" >&5
-$as_echo_n "checking if $compiler static flag $lt_tmp_static_flag works... " >&6; }
-if test "${lt_cv_prog_compiler_static_works_GCJ+set}" = set; then
- $as_echo_n "(cached) " >&6
-else
- lt_cv_prog_compiler_static_works_GCJ=no
- save_LDFLAGS="$LDFLAGS"
- LDFLAGS="$LDFLAGS $lt_tmp_static_flag"
- echo "$lt_simple_link_test_code" > conftest.$ac_ext
- if (eval $ac_link 2>conftest.err) && test -s conftest$ac_exeext; then
- # The linker can only warn and ignore the option if not recognized
- # So say no if there are warnings
- if test -s conftest.err; then
- # Append any errors to the config.log.
- cat conftest.err 1>&5
- $echo "X$_lt_linker_boilerplate" | $Xsed -e '/^$/d' > conftest.exp
- $SED '/^$/d; /^ *+/d' conftest.err >conftest.er2
- if diff conftest.exp conftest.er2 >/dev/null; then
- lt_cv_prog_compiler_static_works_GCJ=yes
- fi
- else
- lt_cv_prog_compiler_static_works_GCJ=yes
- fi
- fi
- $rm -r conftest*
- LDFLAGS="$save_LDFLAGS"
-
-fi
-{ $as_echo "$as_me:$LINENO: result: $lt_cv_prog_compiler_static_works_GCJ" >&5
-$as_echo "$lt_cv_prog_compiler_static_works_GCJ" >&6; }
-
-if test x"$lt_cv_prog_compiler_static_works_GCJ" = xyes; then
- :
-else
- lt_prog_compiler_static_GCJ=
-fi
-
-
-{ $as_echo "$as_me:$LINENO: checking if $compiler supports -c -o file.$ac_objext" >&5
-$as_echo_n "checking if $compiler supports -c -o file.$ac_objext... " >&6; }
-if test "${lt_cv_prog_compiler_c_o_GCJ+set}" = set; then
- $as_echo_n "(cached) " >&6
-else
- lt_cv_prog_compiler_c_o_GCJ=no
- $rm -r conftest 2>/dev/null
- mkdir conftest
- cd conftest
- mkdir out
- echo "$lt_simple_compile_test_code" > conftest.$ac_ext
-
- lt_compiler_flag="-o out/conftest2.$ac_objext"
- # Insert the option either (1) after the last *FLAGS variable, or
- # (2) before a word containing "conftest.", or (3) at the end.
- # Note that $ac_compile itself does not contain backslashes and begins
- # with a dollar sign (not a hyphen), so the echo should work correctly.
- lt_compile=`echo "$ac_compile" | $SED \
- -e 's:.*FLAGS}\{0,1\} :&$lt_compiler_flag :; t' \
- -e 's: [^ ]*conftest\.: $lt_compiler_flag&:; t' \
- -e 's:$: $lt_compiler_flag:'`
- (eval echo "\"\$as_me:19630: $lt_compile\"" >&5)
- (eval "$lt_compile" 2>out/conftest.err)
- ac_status=$?
- cat out/conftest.err >&5
- echo "$as_me:19634: \$? = $ac_status" >&5
- if (exit $ac_status) && test -s out/conftest2.$ac_objext
- then
- # The compiler can only warn and ignore the option if not recognized
- # So say no if there are warnings
- $echo "X$_lt_compiler_boilerplate" | $Xsed -e '/^$/d' > out/conftest.exp
- $SED '/^$/d; /^ *+/d' out/conftest.err >out/conftest.er2
- if test ! -s out/conftest.er2 || diff out/conftest.exp out/conftest.er2 >/dev/null; then
- lt_cv_prog_compiler_c_o_GCJ=yes
- fi
- fi
- chmod u+w . 2>&5
- $rm conftest*
- # SGI C++ compiler will create directory out/ii_files/ for
- # template instantiation
- test -d out/ii_files && $rm out/ii_files/* && rmdir out/ii_files
- $rm out/* && rmdir out
- cd ..
- rmdir conftest
- $rm conftest*
-
-fi
-{ $as_echo "$as_me:$LINENO: result: $lt_cv_prog_compiler_c_o_GCJ" >&5
-$as_echo "$lt_cv_prog_compiler_c_o_GCJ" >&6; }
-
-
-hard_links="nottested"
-if test "$lt_cv_prog_compiler_c_o_GCJ" = no && test "$need_locks" != no; then
- # do not overwrite the value of need_locks provided by the user
- { $as_echo "$as_me:$LINENO: checking if we can lock with hard links" >&5
-$as_echo_n "checking if we can lock with hard links... " >&6; }
- hard_links=yes
- $rm conftest*
- ln conftest.a conftest.b 2>/dev/null && hard_links=no
- touch conftest.a
- ln conftest.a conftest.b 2>&5 || hard_links=no
- ln conftest.a conftest.b 2>/dev/null && hard_links=no
- { $as_echo "$as_me:$LINENO: result: $hard_links" >&5
-$as_echo "$hard_links" >&6; }
- if test "$hard_links" = no; then
- { $as_echo "$as_me:$LINENO: WARNING: \`$CC' does not support \`-c -o', so \`make -j' may be unsafe" >&5
-$as_echo "$as_me: WARNING: \`$CC' does not support \`-c -o', so \`make -j' may be unsafe" >&2;}
- need_locks=warn
- fi
-else
- need_locks=no
-fi
-
-{ $as_echo "$as_me:$LINENO: checking whether the $compiler linker ($LD) supports shared libraries" >&5
-$as_echo_n "checking whether the $compiler linker ($LD) supports shared libraries... " >&6; }
-
- runpath_var=
- allow_undefined_flag_GCJ=
- enable_shared_with_static_runtimes_GCJ=no
- archive_cmds_GCJ=
- archive_expsym_cmds_GCJ=
- old_archive_From_new_cmds_GCJ=
- old_archive_from_expsyms_cmds_GCJ=
- export_dynamic_flag_spec_GCJ=
- whole_archive_flag_spec_GCJ=
- thread_safe_flag_spec_GCJ=
- hardcode_libdir_flag_spec_GCJ=
- hardcode_libdir_flag_spec_ld_GCJ=
- hardcode_libdir_separator_GCJ=
- hardcode_direct_GCJ=no
- hardcode_minus_L_GCJ=no
- hardcode_shlibpath_var_GCJ=unsupported
- link_all_deplibs_GCJ=unknown
- hardcode_automatic_GCJ=no
- module_cmds_GCJ=
- module_expsym_cmds_GCJ=
- always_export_symbols_GCJ=no
- export_symbols_cmds_GCJ='$NM $libobjs $convenience | $global_symbol_pipe | $SED '\''s/.* //'\'' | sort | uniq > $export_symbols'
- # include_expsyms should be a list of space-separated symbols to be *always*
- # included in the symbol list
- include_expsyms_GCJ=
- # exclude_expsyms can be an extended regexp of symbols to exclude
- # it will be wrapped by ` (' and `)$', so one must not match beginning or
- # end of line. Example: `a|bc|.*d.*' will exclude the symbols `a' and `bc',
- # as well as any symbol that contains `d'.
- exclude_expsyms_GCJ='_GLOBAL_OFFSET_TABLE_|_GLOBAL__F[ID]_.*'
- # Although _GLOBAL_OFFSET_TABLE_ is a valid symbol C name, most a.out
- # platforms (ab)use it in PIC code, but their linkers get confused if
- # the symbol is explicitly referenced. Since portable code cannot
- # rely on this symbol name, it's probably fine to never include it in
- # preloaded symbol tables.
- # Exclude shared library initialization/finalization symbols.
- extract_expsyms_cmds=
- # Just being paranoid about ensuring that cc_basename is set.
- for cc_temp in $compiler""; do
- case $cc_temp in
- compile | *[\\/]compile | ccache | *[\\/]ccache ) ;;
- distcc | *[\\/]distcc | purify | *[\\/]purify ) ;;
- \-*) ;;
- *) break;;
- esac
-done
-cc_basename=`$echo "X$cc_temp" | $Xsed -e 's%.*/%%' -e "s%^$host_alias-%%"`
-
- case $host_os in
- cygwin* | mingw* | pw32*)
- # FIXME: the MSVC++ port hasn't been tested in a loooong time
- # When not using gcc, we currently assume that we are using
- # Microsoft Visual C++.
- if test "$GCC" != yes; then
- with_gnu_ld=no
- fi
- ;;
- interix*)
- # we just hope/assume this is gcc and not c89 (= MSVC++)
- with_gnu_ld=yes
- ;;
- openbsd*)
- with_gnu_ld=no
- ;;
- esac
-
- ld_shlibs_GCJ=yes
- if test "$with_gnu_ld" = yes; then
- # If archive_cmds runs LD, not CC, wlarc should be empty
- wlarc='${wl}'
-
- # Set some defaults for GNU ld with shared library support. These
- # are reset later if shared libraries are not supported. Putting them
- # here allows them to be overridden if necessary.
- runpath_var=LD_RUN_PATH
- hardcode_libdir_flag_spec_GCJ='${wl}--rpath ${wl}$libdir'
- export_dynamic_flag_spec_GCJ='${wl}--export-dynamic'
- # ancient GNU ld didn't support --whole-archive et. al.
- if $LD --help 2>&1 | grep 'no-whole-archive' > /dev/null; then
- whole_archive_flag_spec_GCJ="$wlarc"'--whole-archive$convenience '"$wlarc"'--no-whole-archive'
- else
- whole_archive_flag_spec_GCJ=
- fi
- supports_anon_versioning=no
- case `$LD -v 2>/dev/null` in
- *\ [01].* | *\ 2.[0-9].* | *\ 2.10.*) ;; # catch versions < 2.11
- *\ 2.11.93.0.2\ *) supports_anon_versioning=yes ;; # RH7.3 ...
- *\ 2.11.92.0.12\ *) supports_anon_versioning=yes ;; # Mandrake 8.2 ...
- *\ 2.11.*) ;; # other 2.11 versions
- *) supports_anon_versioning=yes ;;
- esac
-
- # See if GNU ld supports shared libraries.
- case $host_os in
- aix[3-9]*)
- # On AIX/PPC, the GNU linker is very broken
- if test "$host_cpu" != ia64; then
- ld_shlibs_GCJ=no
- cat <<EOF 1>&2
-
-*** Warning: the GNU linker, at least up to release 2.9.1, is reported
-*** to be unable to reliably create shared libraries on AIX.
-*** Therefore, libtool is disabling shared libraries support. If you
-*** really care for shared libraries, you may want to modify your PATH
-*** so that a non-GNU linker is found, and then restart.
-
-EOF
- fi
- ;;
-
- amigaos*)
- archive_cmds_GCJ='$rm $output_objdir/a2ixlibrary.data~$echo "#define NAME $libname" > $output_objdir/a2ixlibrary.data~$echo "#define LIBRARY_ID 1" >> $output_objdir/a2ixlibrary.data~$echo "#define VERSION $major" >> $output_objdir/a2ixlibrary.data~$echo "#define REVISION $revision" >> $output_objdir/a2ixlibrary.data~$AR $AR_FLAGS $lib $libobjs~$RANLIB $lib~(cd $output_objdir && a2ixlibrary -32)'
- hardcode_libdir_flag_spec_GCJ='-L$libdir'
- hardcode_minus_L_GCJ=yes
-
- # Samuel A. Falvo II <kc5tja@dolphin.openprojects.net> reports
- # that the semantics of dynamic libraries on AmigaOS, at least up
- # to version 4, is to share data among multiple programs linked
- # with the same dynamic library. Since this doesn't match the
- # behavior of shared libraries on other platforms, we can't use
- # them.
- ld_shlibs_GCJ=no
- ;;
-
- beos*)
- if $LD --help 2>&1 | grep ': supported targets:.* elf' > /dev/null; then
- allow_undefined_flag_GCJ=unsupported
- # Joseph Beckenbach <jrb3@best.com> says some releases of gcc
- # support --undefined. This deserves some investigation. FIXME
- archive_cmds_GCJ='$CC -nostart $libobjs $deplibs $compiler_flags ${wl}-soname $wl$soname -o $lib'
- else
- ld_shlibs_GCJ=no
- fi
- ;;
-
- cygwin* | mingw* | pw32*)
- # _LT_AC_TAGVAR(hardcode_libdir_flag_spec, GCJ) is actually meaningless,
- # as there is no search path for DLLs.
- hardcode_libdir_flag_spec_GCJ='-L$libdir'
- allow_undefined_flag_GCJ=unsupported
- always_export_symbols_GCJ=no
- enable_shared_with_static_runtimes_GCJ=yes
- export_symbols_cmds_GCJ='$NM $libobjs $convenience | $global_symbol_pipe | $SED -e '\''/^[BCDGRS][ ]/s/.*[ ]\([^ ]*\)/\1 DATA/'\'' -e '\''/^[AITW][ ]/s/.*[ ]//'\'' | sort | uniq > $export_symbols'
-
- if $LD --help 2>&1 | grep 'auto-import' > /dev/null; then
- archive_cmds_GCJ='$CC -shared $libobjs $deplibs $compiler_flags -o $output_objdir/$soname ${wl}--enable-auto-image-base -Xlinker --out-implib -Xlinker $lib'
- # If the export-symbols file already is a .def file (1st line
- # is EXPORTS), use it as is; otherwise, prepend...
- archive_expsym_cmds_GCJ='if test "x`$SED 1q $export_symbols`" = xEXPORTS; then
- cp $export_symbols $output_objdir/$soname.def;
- else
- echo EXPORTS > $output_objdir/$soname.def;
- cat $export_symbols >> $output_objdir/$soname.def;
- fi~
- $CC -shared $output_objdir/$soname.def $libobjs $deplibs $compiler_flags -o $output_objdir/$soname ${wl}--enable-auto-image-base -Xlinker --out-implib -Xlinker $lib'
- else
- ld_shlibs_GCJ=no
- fi
- ;;
-
- interix[3-9]*)
- hardcode_direct_GCJ=no
- hardcode_shlibpath_var_GCJ=no
- hardcode_libdir_flag_spec_GCJ='${wl}-rpath,$libdir'
- export_dynamic_flag_spec_GCJ='${wl}-E'
- # Hack: On Interix 3.x, we cannot compile PIC because of a broken gcc.
- # Instead, shared libraries are loaded at an image base (0x10000000 by
- # default) and relocated if they conflict, which is a slow very memory
- # consuming and fragmenting process. To avoid this, we pick a random,
- # 256 KiB-aligned image base between 0x50000000 and 0x6FFC0000 at link
- # time. Moving up from 0x10000000 also allows more sbrk(2) space.
- archive_cmds_GCJ='$CC -shared $pic_flag $libobjs $deplibs $compiler_flags ${wl}-h,$soname ${wl}--image-base,`expr ${RANDOM-$$} % 4096 / 2 \* 262144 + 1342177280` -o $lib'
- archive_expsym_cmds_GCJ='sed "s,^,_," $export_symbols >$output_objdir/$soname.expsym~$CC -shared $pic_flag $libobjs $deplibs $compiler_flags ${wl}-h,$soname ${wl}--retain-symbols-file,$output_objdir/$soname.expsym ${wl}--image-base,`expr ${RANDOM-$$} % 4096 / 2 \* 262144 + 1342177280` -o $lib'
- ;;
-
- gnu* | linux* | k*bsd*-gnu)
- if $LD --help 2>&1 | grep ': supported targets:.* elf' > /dev/null; then
- tmp_addflag=
- case $cc_basename,$host_cpu in
- pgcc*) # Portland Group C compiler
- whole_archive_flag_spec_GCJ='${wl}--whole-archive`for conv in $convenience\"\"; do test -n \"$conv\" && new_convenience=\"$new_convenience,$conv\"; done; $echo \"$new_convenience\"` ${wl}--no-whole-archive'
- tmp_addflag=' $pic_flag'
- ;;
- pgf77* | pgf90* | pgf95*) # Portland Group f77 and f90 compilers
- whole_archive_flag_spec_GCJ='${wl}--whole-archive`for conv in $convenience\"\"; do test -n \"$conv\" && new_convenience=\"$new_convenience,$conv\"; done; $echo \"$new_convenience\"` ${wl}--no-whole-archive'
- tmp_addflag=' $pic_flag -Mnomain' ;;
- ecc*,ia64* | icc*,ia64*) # Intel C compiler on ia64
- tmp_addflag=' -i_dynamic' ;;
- efc*,ia64* | ifort*,ia64*) # Intel Fortran compiler on ia64
- tmp_addflag=' -i_dynamic -nofor_main' ;;
- ifc* | ifort*) # Intel Fortran compiler
- tmp_addflag=' -nofor_main' ;;
- esac
- case `$CC -V 2>&1 | sed 5q` in
- *Sun\ C*) # Sun C 5.9
- whole_archive_flag_spec_GCJ='${wl}--whole-archive`new_convenience=; for conv in $convenience\"\"; do test -z \"$conv\" || new_convenience=\"$new_convenience,$conv\"; done; $echo \"$new_convenience\"` ${wl}--no-whole-archive'
- tmp_sharedflag='-G' ;;
- *Sun\ F*) # Sun Fortran 8.3
- tmp_sharedflag='-G' ;;
- *)
- tmp_sharedflag='-shared' ;;
- esac
- archive_cmds_GCJ='$CC '"$tmp_sharedflag""$tmp_addflag"' $libobjs $deplibs $compiler_flags ${wl}-soname $wl$soname -o $lib'
-
- if test $supports_anon_versioning = yes; then
- archive_expsym_cmds_GCJ='$echo "{ global:" > $output_objdir/$libname.ver~
- cat $export_symbols | sed -e "s/\(.*\)/\1;/" >> $output_objdir/$libname.ver~
- $echo "local: *; };" >> $output_objdir/$libname.ver~
- $CC '"$tmp_sharedflag""$tmp_addflag"' $libobjs $deplibs $compiler_flags ${wl}-soname $wl$soname ${wl}-version-script ${wl}$output_objdir/$libname.ver -o $lib'
- fi
- else
- ld_shlibs_GCJ=no
- fi
- ;;
-
- netbsd*)
- if echo __ELF__ | $CC -E - | grep __ELF__ >/dev/null; then
- archive_cmds_GCJ='$LD -Bshareable $libobjs $deplibs $linker_flags -o $lib'
- wlarc=
- else
- archive_cmds_GCJ='$CC -shared $libobjs $deplibs $compiler_flags ${wl}-soname $wl$soname -o $lib'
- archive_expsym_cmds_GCJ='$CC -shared $libobjs $deplibs $compiler_flags ${wl}-soname $wl$soname ${wl}-retain-symbols-file $wl$export_symbols -o $lib'
- fi
- ;;
-
- solaris*)
- if $LD -v 2>&1 | grep 'BFD 2\.8' > /dev/null; then
- ld_shlibs_GCJ=no
- cat <<EOF 1>&2
-
-*** Warning: The releases 2.8.* of the GNU linker cannot reliably
-*** create shared libraries on Solaris systems. Therefore, libtool
-*** is disabling shared libraries support. We urge you to upgrade GNU
-*** binutils to release 2.9.1 or newer. Another option is to modify
-*** your PATH or compiler configuration so that the native linker is
-*** used, and then restart.
-
-EOF
- elif $LD --help 2>&1 | grep ': supported targets:.* elf' > /dev/null; then
- archive_cmds_GCJ='$CC -shared $libobjs $deplibs $compiler_flags ${wl}-soname $wl$soname -o $lib'
- archive_expsym_cmds_GCJ='$CC -shared $libobjs $deplibs $compiler_flags ${wl}-soname $wl$soname ${wl}-retain-symbols-file $wl$export_symbols -o $lib'
- else
- ld_shlibs_GCJ=no
- fi
- ;;
-
- sysv5* | sco3.2v5* | sco5v6* | unixware* | OpenUNIX*)
- case `$LD -v 2>&1` in
- *\ [01].* | *\ 2.[0-9].* | *\ 2.1[0-5].*)
- ld_shlibs_GCJ=no
- cat <<_LT_EOF 1>&2
-
-*** Warning: Releases of the GNU linker prior to 2.16.91.0.3 can not
-*** reliably create shared libraries on SCO systems. Therefore, libtool
-*** is disabling shared libraries support. We urge you to upgrade GNU
-*** binutils to release 2.16.91.0.3 or newer. Another option is to modify
-*** your PATH or compiler configuration so that the native linker is
-*** used, and then restart.
-
-_LT_EOF
- ;;
- *)
- if $LD --help 2>&1 | grep ': supported targets:.* elf' > /dev/null; then
- hardcode_libdir_flag_spec_GCJ='`test -z "$SCOABSPATH" && echo ${wl}-rpath,$libdir`'
- archive_cmds_GCJ='$CC -shared $libobjs $deplibs $compiler_flags ${wl}-soname,\${SCOABSPATH:+${install_libdir}/}$soname -o $lib'
- archive_expsym_cmds_GCJ='$CC -shared $libobjs $deplibs $compiler_flags ${wl}-soname,\${SCOABSPATH:+${install_libdir}/}$soname,-retain-symbols-file,$export_symbols -o $lib'
- else
- ld_shlibs_GCJ=no
- fi
- ;;
- esac
- ;;
-
- sunos4*)
- archive_cmds_GCJ='$LD -assert pure-text -Bshareable -o $lib $libobjs $deplibs $linker_flags'
- wlarc=
- hardcode_direct_GCJ=yes
- hardcode_shlibpath_var_GCJ=no
- ;;
-
- *)
- if $LD --help 2>&1 | grep ': supported targets:.* elf' > /dev/null; then
- archive_cmds_GCJ='$CC -shared $libobjs $deplibs $compiler_flags ${wl}-soname $wl$soname -o $lib'
- archive_expsym_cmds_GCJ='$CC -shared $libobjs $deplibs $compiler_flags ${wl}-soname $wl$soname ${wl}-retain-symbols-file $wl$export_symbols -o $lib'
- else
- ld_shlibs_GCJ=no
- fi
- ;;
- esac
-
- if test "$ld_shlibs_GCJ" = no; then
- runpath_var=
- hardcode_libdir_flag_spec_GCJ=
- export_dynamic_flag_spec_GCJ=
- whole_archive_flag_spec_GCJ=
- fi
- else
- # PORTME fill in a description of your system's linker (not GNU ld)
- case $host_os in
- aix3*)
- allow_undefined_flag_GCJ=unsupported
- always_export_symbols_GCJ=yes
- archive_expsym_cmds_GCJ='$LD -o $output_objdir/$soname $libobjs $deplibs $linker_flags -bE:$export_symbols -T512 -H512 -bM:SRE~$AR $AR_FLAGS $lib $output_objdir/$soname'
- # Note: this linker hardcodes the directories in LIBPATH if there
- # are no directories specified by -L.
- hardcode_minus_L_GCJ=yes
- if test "$GCC" = yes && test -z "$lt_prog_compiler_static"; then
- # Neither direct hardcoding nor static linking is supported with a
- # broken collect2.
- hardcode_direct_GCJ=unsupported
- fi
- ;;
-
- aix[4-9]*)
- if test "$host_cpu" = ia64; then
- # On IA64, the linker does run time linking by default, so we don't
- # have to do anything special.
- aix_use_runtimelinking=no
- exp_sym_flag='-Bexport'
- no_entry_flag=""
- else
- # If we're using GNU nm, then we don't want the "-C" option.
- # -C means demangle to AIX nm, but means don't demangle with GNU nm
- if $NM -V 2>&1 | grep 'GNU' > /dev/null; then
- export_symbols_cmds_GCJ='$NM -Bpg $libobjs $convenience | awk '\''{ if (((\$2 == "T") || (\$2 == "D") || (\$2 == "B")) && (substr(\$3,1,1) != ".")) { print \$3 } }'\'' | sort -u > $export_symbols'
- else
- export_symbols_cmds_GCJ='$NM -BCpg $libobjs $convenience | awk '\''{ if (((\$2 == "T") || (\$2 == "D") || (\$2 == "B")) && (substr(\$3,1,1) != ".")) { print \$3 } }'\'' | sort -u > $export_symbols'
- fi
- aix_use_runtimelinking=no
-
- # Test if we are trying to use run time linking or normal
- # AIX style linking. If -brtl is somewhere in LDFLAGS, we
- # need to do runtime linking.
- case $host_os in aix4.[23]|aix4.[23].*|aix[5-9]*)
- for ld_flag in $LDFLAGS; do
- if (test $ld_flag = "-brtl" || test $ld_flag = "-Wl,-brtl"); then
- aix_use_runtimelinking=yes
- break
- fi
- done
- ;;
- esac
-
- exp_sym_flag='-bexport'
- no_entry_flag='-bnoentry'
- fi
-
- # When large executables or shared objects are built, AIX ld can
- # have problems creating the table of contents. If linking a library
- # or program results in "error TOC overflow" add -mminimal-toc to
- # CXXFLAGS/CFLAGS for g++/gcc. In the cases where that is not
- # enough to fix the problem, add -Wl,-bbigtoc to LDFLAGS.
-
- archive_cmds_GCJ=''
- hardcode_direct_GCJ=yes
- hardcode_libdir_separator_GCJ=':'
- link_all_deplibs_GCJ=yes
-
- if test "$GCC" = yes; then
- case $host_os in aix4.[012]|aix4.[012].*)
- # We only want to do this on AIX 4.2 and lower, the check
- # below for broken collect2 doesn't work under 4.3+
- collect2name=`${CC} -print-prog-name=collect2`
- if test -f "$collect2name" && \
- strings "$collect2name" | grep resolve_lib_name >/dev/null
- then
- # We have reworked collect2
- :
- else
- # We have old collect2
- hardcode_direct_GCJ=unsupported
- # It fails to find uninstalled libraries when the uninstalled
- # path is not listed in the libpath. Setting hardcode_minus_L
- # to unsupported forces relinking
- hardcode_minus_L_GCJ=yes
- hardcode_libdir_flag_spec_GCJ='-L$libdir'
- hardcode_libdir_separator_GCJ=
- fi
- ;;
- esac
- shared_flag='-shared'
- if test "$aix_use_runtimelinking" = yes; then
- shared_flag="$shared_flag "'${wl}-G'
- fi
- else
- # not using gcc
- if test "$host_cpu" = ia64; then
- # VisualAge C++, Version 5.5 for AIX 5L for IA-64, Beta 3 Release
- # chokes on -Wl,-G. The following line is correct:
- shared_flag='-G'
- else
- if test "$aix_use_runtimelinking" = yes; then
- shared_flag='${wl}-G'
- else
- shared_flag='${wl}-bM:SRE'
- fi
- fi
- fi
-
- # It seems that -bexpall does not export symbols beginning with
- # underscore (_), so it is better to generate a list of symbols to export.
- always_export_symbols_GCJ=yes
- if test "$aix_use_runtimelinking" = yes; then
- # Warning - without using the other runtime loading flags (-brtl),
- # -berok will link without error, but may produce a broken library.
- allow_undefined_flag_GCJ='-berok'
- # Determine the default libpath from the value encoded in an empty executable.
- cat >conftest.$ac_ext <<_ACEOF
-/* confdefs.h. */
-_ACEOF
-cat confdefs.h >>conftest.$ac_ext
-cat >>conftest.$ac_ext <<_ACEOF
-/* end confdefs.h. */
-
-int
-main ()
-{
-
- ;
- return 0;
-}
-_ACEOF
-rm -f conftest.$ac_objext conftest$ac_exeext
-if { (ac_try="$ac_link"
-case "(($ac_try" in
- *\"* | *\`* | *\\*) ac_try_echo=\$ac_try;;
- *) ac_try_echo=$ac_try;;
-esac
-eval ac_try_echo="\"\$as_me:$LINENO: $ac_try_echo\""
-$as_echo "$ac_try_echo") >&5
- (eval "$ac_link") 2>conftest.er1
- ac_status=$?
- grep -v '^ *+' conftest.er1 >conftest.err
- rm -f conftest.er1
- cat conftest.err >&5
- $as_echo "$as_me:$LINENO: \$? = $ac_status" >&5
- (exit $ac_status); } && {
- test -z "$ac_c_werror_flag" ||
- test ! -s conftest.err
- } && test -s conftest$ac_exeext && {
- test "$cross_compiling" = yes ||
- $as_test_x conftest$ac_exeext
- }; then
-
-lt_aix_libpath_sed='
- /Import File Strings/,/^$/ {
- /^0/ {
- s/^0 *\(.*\)$/\1/
- p
- }
- }'
-aix_libpath=`dump -H conftest$ac_exeext 2>/dev/null | $SED -n -e "$lt_aix_libpath_sed"`
-# Check for a 64-bit object if we didn't find anything.
-if test -z "$aix_libpath"; then
- aix_libpath=`dump -HX64 conftest$ac_exeext 2>/dev/null | $SED -n -e "$lt_aix_libpath_sed"`
-fi
-else
- $as_echo "$as_me: failed program was:" >&5
-sed 's/^/| /' conftest.$ac_ext >&5
-
-
-fi
-
-rm -rf conftest.dSYM
-rm -f core conftest.err conftest.$ac_objext conftest_ipa8_conftest.oo \
- conftest$ac_exeext conftest.$ac_ext
-if test -z "$aix_libpath"; then aix_libpath="/usr/lib:/lib"; fi
-
- hardcode_libdir_flag_spec_GCJ='${wl}-blibpath:$libdir:'"$aix_libpath"
- archive_expsym_cmds_GCJ="\$CC"' -o $output_objdir/$soname $libobjs $deplibs '"\${wl}$no_entry_flag"' $compiler_flags `if test "x${allow_undefined_flag}" != "x"; then echo "${wl}${allow_undefined_flag}"; else :; fi` '"\${wl}$exp_sym_flag:\$export_symbols $shared_flag"
- else
- if test "$host_cpu" = ia64; then
- hardcode_libdir_flag_spec_GCJ='${wl}-R $libdir:/usr/lib:/lib'
- allow_undefined_flag_GCJ="-z nodefs"
- archive_expsym_cmds_GCJ="\$CC $shared_flag"' -o $output_objdir/$soname $libobjs $deplibs '"\${wl}$no_entry_flag"' $compiler_flags ${wl}${allow_undefined_flag} '"\${wl}$exp_sym_flag:\$export_symbols"
- else
- # Determine the default libpath from the value encoded in an empty executable.
- cat >conftest.$ac_ext <<_ACEOF
-/* confdefs.h. */
-_ACEOF
-cat confdefs.h >>conftest.$ac_ext
-cat >>conftest.$ac_ext <<_ACEOF
-/* end confdefs.h. */
-
-int
-main ()
-{
-
- ;
- return 0;
-}
-_ACEOF
-rm -f conftest.$ac_objext conftest$ac_exeext
-if { (ac_try="$ac_link"
-case "(($ac_try" in
- *\"* | *\`* | *\\*) ac_try_echo=\$ac_try;;
- *) ac_try_echo=$ac_try;;
-esac
-eval ac_try_echo="\"\$as_me:$LINENO: $ac_try_echo\""
-$as_echo "$ac_try_echo") >&5
- (eval "$ac_link") 2>conftest.er1
- ac_status=$?
- grep -v '^ *+' conftest.er1 >conftest.err
- rm -f conftest.er1
- cat conftest.err >&5
- $as_echo "$as_me:$LINENO: \$? = $ac_status" >&5
- (exit $ac_status); } && {
- test -z "$ac_c_werror_flag" ||
- test ! -s conftest.err
- } && test -s conftest$ac_exeext && {
- test "$cross_compiling" = yes ||
- $as_test_x conftest$ac_exeext
- }; then
-
-lt_aix_libpath_sed='
- /Import File Strings/,/^$/ {
- /^0/ {
- s/^0 *\(.*\)$/\1/
- p
- }
- }'
-aix_libpath=`dump -H conftest$ac_exeext 2>/dev/null | $SED -n -e "$lt_aix_libpath_sed"`
-# Check for a 64-bit object if we didn't find anything.
-if test -z "$aix_libpath"; then
- aix_libpath=`dump -HX64 conftest$ac_exeext 2>/dev/null | $SED -n -e "$lt_aix_libpath_sed"`
-fi
-else
- $as_echo "$as_me: failed program was:" >&5
-sed 's/^/| /' conftest.$ac_ext >&5
-
-
-fi
-
-rm -rf conftest.dSYM
-rm -f core conftest.err conftest.$ac_objext conftest_ipa8_conftest.oo \
- conftest$ac_exeext conftest.$ac_ext
-if test -z "$aix_libpath"; then aix_libpath="/usr/lib:/lib"; fi
-
- hardcode_libdir_flag_spec_GCJ='${wl}-blibpath:$libdir:'"$aix_libpath"
- # Warning - without using the other run time loading flags,
- # -berok will link without error, but may produce a broken library.
- no_undefined_flag_GCJ=' ${wl}-bernotok'
- allow_undefined_flag_GCJ=' ${wl}-berok'
- # Exported symbols can be pulled into shared objects from archives
- whole_archive_flag_spec_GCJ='$convenience'
- archive_cmds_need_lc_GCJ=yes
- # This is similar to how AIX traditionally builds its shared libraries.
- archive_expsym_cmds_GCJ="\$CC $shared_flag"' -o $output_objdir/$soname $libobjs $deplibs ${wl}-bnoentry $compiler_flags ${wl}-bE:$export_symbols${allow_undefined_flag}~$AR $AR_FLAGS $output_objdir/$libname$release.a $output_objdir/$soname'
- fi
- fi
- ;;
-
- amigaos*)
- archive_cmds_GCJ='$rm $output_objdir/a2ixlibrary.data~$echo "#define NAME $libname" > $output_objdir/a2ixlibrary.data~$echo "#define LIBRARY_ID 1" >> $output_objdir/a2ixlibrary.data~$echo "#define VERSION $major" >> $output_objdir/a2ixlibrary.data~$echo "#define REVISION $revision" >> $output_objdir/a2ixlibrary.data~$AR $AR_FLAGS $lib $libobjs~$RANLIB $lib~(cd $output_objdir && a2ixlibrary -32)'
- hardcode_libdir_flag_spec_GCJ='-L$libdir'
- hardcode_minus_L_GCJ=yes
- # see comment about different semantics on the GNU ld section
- ld_shlibs_GCJ=no
- ;;
-
- bsdi[45]*)
- export_dynamic_flag_spec_GCJ=-rdynamic
- ;;
-
- cygwin* | mingw* | pw32*)
- # When not using gcc, we currently assume that we are using
- # Microsoft Visual C++.
- # hardcode_libdir_flag_spec is actually meaningless, as there is
- # no search path for DLLs.
- hardcode_libdir_flag_spec_GCJ=' '
- allow_undefined_flag_GCJ=unsupported
- # Tell ltmain to make .lib files, not .a files.
- libext=lib
- # Tell ltmain to make .dll files, not .so files.
- shrext_cmds=".dll"
- # FIXME: Setting linknames here is a bad hack.
- archive_cmds_GCJ='$CC -o $lib $libobjs $compiler_flags `echo "$deplibs" | $SED -e '\''s/ -lc$//'\''` -link -dll~linknames='
- # The linker will automatically build a .lib file if we build a DLL.
- old_archive_From_new_cmds_GCJ='true'
- # FIXME: Should let the user specify the lib program.
- old_archive_cmds_GCJ='lib -OUT:$oldlib$oldobjs$old_deplibs'
- fix_srcfile_path_GCJ='`cygpath -w "$srcfile"`'
- enable_shared_with_static_runtimes_GCJ=yes
- ;;
-
- darwin* | rhapsody*)
- case $host_os in
- rhapsody* | darwin1.[012])
- allow_undefined_flag_GCJ='${wl}-undefined ${wl}suppress'
- ;;
- *) # Darwin 1.3 on
- if test -z ${MACOSX_DEPLOYMENT_TARGET} ; then
- allow_undefined_flag_GCJ='${wl}-flat_namespace ${wl}-undefined ${wl}suppress'
- else
- case ${MACOSX_DEPLOYMENT_TARGET} in
- 10.[012])
- allow_undefined_flag_GCJ='${wl}-flat_namespace ${wl}-undefined ${wl}suppress'
- ;;
- 10.*)
- allow_undefined_flag_GCJ='${wl}-undefined ${wl}dynamic_lookup'
- ;;
- esac
- fi
- ;;
- esac
- archive_cmds_need_lc_GCJ=no
- hardcode_direct_GCJ=no
- hardcode_automatic_GCJ=yes
- hardcode_shlibpath_var_GCJ=unsupported
- whole_archive_flag_spec_GCJ=''
- link_all_deplibs_GCJ=yes
- if test "$GCC" = yes ; then
- output_verbose_link_cmd='echo'
- archive_cmds_GCJ="\$CC -dynamiclib \$allow_undefined_flag -o \$lib \$libobjs \$deplibs \$compiler_flags -install_name \$rpath/\$soname \$verstring $_lt_dar_single_mod${_lt_dsymutil}"
- module_cmds_GCJ="\$CC \$allow_undefined_flag -o \$lib -bundle \$libobjs \$deplibs \$compiler_flags${_lt_dsymutil}"
- archive_expsym_cmds_GCJ="sed 's,^,_,' < \$export_symbols > \$output_objdir/\${libname}-symbols.expsym~\$CC -dynamiclib \$allow_undefined_flag -o \$lib \$libobjs \$deplibs \$compiler_flags -install_name \$rpath/\$soname \$verstring ${_lt_dar_single_mod}${_lt_dar_export_syms}${_lt_dsymutil}"
- module_expsym_cmds_GCJ="sed -e 's,^,_,' < \$export_symbols > \$output_objdir/\${libname}-symbols.expsym~\$CC \$allow_undefined_flag -o \$lib -bundle \$libobjs \$deplibs \$compiler_flags${_lt_dar_export_syms}${_lt_dsymutil}"
- else
- case $cc_basename in
- xlc*)
- output_verbose_link_cmd='echo'
- archive_cmds_GCJ='$CC -qmkshrobj $allow_undefined_flag -o $lib $libobjs $deplibs $compiler_flags ${wl}-install_name ${wl}`echo $rpath/$soname` $xlcverstring'
- module_cmds_GCJ='$CC $allow_undefined_flag -o $lib -bundle $libobjs $deplibs$compiler_flags'
- # Don't fix this by using the ld -exported_symbols_list flag, it doesn't exist in older darwin lds
- archive_expsym_cmds_GCJ='sed -e "s,#.*,," -e "s,^[ ]*,," -e "s,^\(..*\),_&," < $export_symbols > $output_objdir/${libname}-symbols.expsym~$CC -qmkshrobj $allow_undefined_flag -o $lib $libobjs $deplibs $compiler_flags ${wl}-install_name ${wl}$rpath/$soname $xlcverstring~nmedit -s $output_objdir/${libname}-symbols.expsym ${lib}'
- module_expsym_cmds_GCJ='sed -e "s,#.*,," -e "s,^[ ]*,," -e "s,^\(..*\),_&," < $export_symbols > $output_objdir/${libname}-symbols.expsym~$CC $allow_undefined_flag -o $lib -bundle $libobjs $deplibs$compiler_flags~nmedit -s $output_objdir/${libname}-symbols.expsym ${lib}'
- ;;
- *)
- ld_shlibs_GCJ=no
- ;;
- esac
- fi
- ;;
-
- dgux*)
- archive_cmds_GCJ='$LD -G -h $soname -o $lib $libobjs $deplibs $linker_flags'
- hardcode_libdir_flag_spec_GCJ='-L$libdir'
- hardcode_shlibpath_var_GCJ=no
- ;;
-
- freebsd1*)
- ld_shlibs_GCJ=no
- ;;
-
- # FreeBSD 2.2.[012] allows us to include c++rt0.o to get C++ constructor
- # support. Future versions do this automatically, but an explicit c++rt0.o
- # does not break anything, and helps significantly (at the cost of a little
- # extra space).
- freebsd2.2*)
- archive_cmds_GCJ='$LD -Bshareable -o $lib $libobjs $deplibs $linker_flags /usr/lib/c++rt0.o'
- hardcode_libdir_flag_spec_GCJ='-R$libdir'
- hardcode_direct_GCJ=yes
- hardcode_shlibpath_var_GCJ=no
- ;;
-
- # Unfortunately, older versions of FreeBSD 2 do not have this feature.
- freebsd2*)
- archive_cmds_GCJ='$LD -Bshareable -o $lib $libobjs $deplibs $linker_flags'
- hardcode_direct_GCJ=yes
- hardcode_minus_L_GCJ=yes
- hardcode_shlibpath_var_GCJ=no
- ;;
-
- # FreeBSD 3 and greater uses gcc -shared to do shared libraries.
- freebsd* | dragonfly*)
- archive_cmds_GCJ='$CC -shared -o $lib $libobjs $deplibs $compiler_flags'
- hardcode_libdir_flag_spec_GCJ='-R$libdir'
- hardcode_direct_GCJ=yes
- hardcode_shlibpath_var_GCJ=no
- ;;
-
- hpux9*)
- if test "$GCC" = yes; then
- archive_cmds_GCJ='$rm $output_objdir/$soname~$CC -shared -fPIC ${wl}+b ${wl}$install_libdir -o $output_objdir/$soname $libobjs $deplibs $compiler_flags~test $output_objdir/$soname = $lib || mv $output_objdir/$soname $lib'
- else
- archive_cmds_GCJ='$rm $output_objdir/$soname~$LD -b +b $install_libdir -o $output_objdir/$soname $libobjs $deplibs $linker_flags~test $output_objdir/$soname = $lib || mv $output_objdir/$soname $lib'
- fi
- hardcode_libdir_flag_spec_GCJ='${wl}+b ${wl}$libdir'
- hardcode_libdir_separator_GCJ=:
- hardcode_direct_GCJ=yes
-
- # hardcode_minus_L: Not really in the search PATH,
- # but as the default location of the library.
- hardcode_minus_L_GCJ=yes
- export_dynamic_flag_spec_GCJ='${wl}-E'
- ;;
-
- hpux10*)
- if test "$GCC" = yes -a "$with_gnu_ld" = no; then
- archive_cmds_GCJ='$CC -shared -fPIC ${wl}+h ${wl}$soname ${wl}+b ${wl}$install_libdir -o $lib $libobjs $deplibs $compiler_flags'
- else
- archive_cmds_GCJ='$LD -b +h $soname +b $install_libdir -o $lib $libobjs $deplibs $linker_flags'
- fi
- if test "$with_gnu_ld" = no; then
- hardcode_libdir_flag_spec_GCJ='${wl}+b ${wl}$libdir'
- hardcode_libdir_separator_GCJ=:
-
- hardcode_direct_GCJ=yes
- export_dynamic_flag_spec_GCJ='${wl}-E'
-
- # hardcode_minus_L: Not really in the search PATH,
- # but as the default location of the library.
- hardcode_minus_L_GCJ=yes
- fi
- ;;
-
- hpux11*)
- if test "$GCC" = yes -a "$with_gnu_ld" = no; then
- case $host_cpu in
- hppa*64*)
- archive_cmds_GCJ='$CC -shared ${wl}+h ${wl}$soname -o $lib $libobjs $deplibs $compiler_flags'
- ;;
- ia64*)
- archive_cmds_GCJ='$CC -shared ${wl}+h ${wl}$soname ${wl}+nodefaultrpath -o $lib $libobjs $deplibs $compiler_flags'
- ;;
- *)
- archive_cmds_GCJ='$CC -shared -fPIC ${wl}+h ${wl}$soname ${wl}+b ${wl}$install_libdir -o $lib $libobjs $deplibs $compiler_flags'
- ;;
- esac
- else
- case $host_cpu in
- hppa*64*)
- archive_cmds_GCJ='$CC -b ${wl}+h ${wl}$soname -o $lib $libobjs $deplibs $compiler_flags'
- ;;
- ia64*)
- archive_cmds_GCJ='$CC -b ${wl}+h ${wl}$soname ${wl}+nodefaultrpath -o $lib $libobjs $deplibs $compiler_flags'
- ;;
- *)
- archive_cmds_GCJ='$CC -b ${wl}+h ${wl}$soname ${wl}+b ${wl}$install_libdir -o $lib $libobjs $deplibs $compiler_flags'
- ;;
- esac
- fi
- if test "$with_gnu_ld" = no; then
- hardcode_libdir_flag_spec_GCJ='${wl}+b ${wl}$libdir'
- hardcode_libdir_separator_GCJ=:
-
- case $host_cpu in
- hppa*64*|ia64*)
- hardcode_libdir_flag_spec_ld_GCJ='+b $libdir'
- hardcode_direct_GCJ=no
- hardcode_shlibpath_var_GCJ=no
- ;;
- *)
- hardcode_direct_GCJ=yes
- export_dynamic_flag_spec_GCJ='${wl}-E'
-
- # hardcode_minus_L: Not really in the search PATH,
- # but as the default location of the library.
- hardcode_minus_L_GCJ=yes
- ;;
- esac
- fi
- ;;
-
- irix5* | irix6* | nonstopux*)
- if test "$GCC" = yes; then
- archive_cmds_GCJ='$CC -shared $libobjs $deplibs $compiler_flags ${wl}-soname ${wl}$soname `test -n "$verstring" && echo ${wl}-set_version ${wl}$verstring` ${wl}-update_registry ${wl}${output_objdir}/so_locations -o $lib'
- else
- archive_cmds_GCJ='$LD -shared $libobjs $deplibs $linker_flags -soname $soname `test -n "$verstring" && echo -set_version $verstring` -update_registry ${output_objdir}/so_locations -o $lib'
- hardcode_libdir_flag_spec_ld_GCJ='-rpath $libdir'
- fi
- hardcode_libdir_flag_spec_GCJ='${wl}-rpath ${wl}$libdir'
- hardcode_libdir_separator_GCJ=:
- link_all_deplibs_GCJ=yes
- ;;
-
- netbsd*)
- if echo __ELF__ | $CC -E - | grep __ELF__ >/dev/null; then
- archive_cmds_GCJ='$LD -Bshareable -o $lib $libobjs $deplibs $linker_flags' # a.out
- else
- archive_cmds_GCJ='$LD -shared -o $lib $libobjs $deplibs $linker_flags' # ELF
- fi
- hardcode_libdir_flag_spec_GCJ='-R$libdir'
- hardcode_direct_GCJ=yes
- hardcode_shlibpath_var_GCJ=no
- ;;
-
- newsos6)
- archive_cmds_GCJ='$LD -G -h $soname -o $lib $libobjs $deplibs $linker_flags'
- hardcode_direct_GCJ=yes
- hardcode_libdir_flag_spec_GCJ='${wl}-rpath ${wl}$libdir'
- hardcode_libdir_separator_GCJ=:
- hardcode_shlibpath_var_GCJ=no
- ;;
-
- openbsd*)
- if test -f /usr/libexec/ld.so; then
- hardcode_direct_GCJ=yes
- hardcode_shlibpath_var_GCJ=no
- if test -z "`echo __ELF__ | $CC -E - | grep __ELF__`" || test "$host_os-$host_cpu" = "openbsd2.8-powerpc"; then
- archive_cmds_GCJ='$CC -shared $pic_flag -o $lib $libobjs $deplibs $compiler_flags'
- archive_expsym_cmds_GCJ='$CC -shared $pic_flag -o $lib $libobjs $deplibs $compiler_flags ${wl}-retain-symbols-file,$export_symbols'
- hardcode_libdir_flag_spec_GCJ='${wl}-rpath,$libdir'
- export_dynamic_flag_spec_GCJ='${wl}-E'
- else
- case $host_os in
- openbsd[01].* | openbsd2.[0-7] | openbsd2.[0-7].*)
- archive_cmds_GCJ='$LD -Bshareable -o $lib $libobjs $deplibs $linker_flags'
- hardcode_libdir_flag_spec_GCJ='-R$libdir'
- ;;
- *)
- archive_cmds_GCJ='$CC -shared $pic_flag -o $lib $libobjs $deplibs $compiler_flags'
- hardcode_libdir_flag_spec_GCJ='${wl}-rpath,$libdir'
- ;;
- esac
- fi
- else
- ld_shlibs_GCJ=no
- fi
- ;;
-
- os2*)
- hardcode_libdir_flag_spec_GCJ='-L$libdir'
- hardcode_minus_L_GCJ=yes
- allow_undefined_flag_GCJ=unsupported
- archive_cmds_GCJ='$echo "LIBRARY $libname INITINSTANCE" > $output_objdir/$libname.def~$echo "DESCRIPTION \"$libname\"" >> $output_objdir/$libname.def~$echo DATA >> $output_objdir/$libname.def~$echo " SINGLE NONSHARED" >> $output_objdir/$libname.def~$echo EXPORTS >> $output_objdir/$libname.def~emxexp $libobjs >> $output_objdir/$libname.def~$CC -Zdll -Zcrtdll -o $lib $libobjs $deplibs $compiler_flags $output_objdir/$libname.def'
- old_archive_From_new_cmds_GCJ='emximp -o $output_objdir/$libname.a $output_objdir/$libname.def'
- ;;
-
- osf3*)
- if test "$GCC" = yes; then
- allow_undefined_flag_GCJ=' ${wl}-expect_unresolved ${wl}\*'
- archive_cmds_GCJ='$CC -shared${allow_undefined_flag} $libobjs $deplibs $compiler_flags ${wl}-soname ${wl}$soname `test -n "$verstring" && echo ${wl}-set_version ${wl}$verstring` ${wl}-update_registry ${wl}${output_objdir}/so_locations -o $lib'
- else
- allow_undefined_flag_GCJ=' -expect_unresolved \*'
- archive_cmds_GCJ='$LD -shared${allow_undefined_flag} $libobjs $deplibs $linker_flags -soname $soname `test -n "$verstring" && echo -set_version $verstring` -update_registry ${output_objdir}/so_locations -o $lib'
- fi
- hardcode_libdir_flag_spec_GCJ='${wl}-rpath ${wl}$libdir'
- hardcode_libdir_separator_GCJ=:
- ;;
-
- osf4* | osf5*) # as osf3* with the addition of -msym flag
- if test "$GCC" = yes; then
- allow_undefined_flag_GCJ=' ${wl}-expect_unresolved ${wl}\*'
- archive_cmds_GCJ='$CC -shared${allow_undefined_flag} $libobjs $deplibs $compiler_flags ${wl}-msym ${wl}-soname ${wl}$soname `test -n "$verstring" && echo ${wl}-set_version ${wl}$verstring` ${wl}-update_registry ${wl}${output_objdir}/so_locations -o $lib'
- hardcode_libdir_flag_spec_GCJ='${wl}-rpath ${wl}$libdir'
- else
- allow_undefined_flag_GCJ=' -expect_unresolved \*'
- archive_cmds_GCJ='$LD -shared${allow_undefined_flag} $libobjs $deplibs $linker_flags -msym -soname $soname `test -n "$verstring" && echo -set_version $verstring` -update_registry ${output_objdir}/so_locations -o $lib'
- archive_expsym_cmds_GCJ='for i in `cat $export_symbols`; do printf "%s %s\\n" -exported_symbol "\$i" >> $lib.exp; done; echo "-hidden">> $lib.exp~
- $LD -shared${allow_undefined_flag} -input $lib.exp $linker_flags $libobjs $deplibs -soname $soname `test -n "$verstring" && echo -set_version $verstring` -update_registry ${output_objdir}/so_locations -o $lib~$rm $lib.exp'
-
- # Both c and cxx compiler support -rpath directly
- hardcode_libdir_flag_spec_GCJ='-rpath $libdir'
- fi
- hardcode_libdir_separator_GCJ=:
- ;;
-
- solaris*)
- no_undefined_flag_GCJ=' -z text'
- if test "$GCC" = yes; then
- wlarc='${wl}'
- archive_cmds_GCJ='$CC -shared ${wl}-h ${wl}$soname -o $lib $libobjs $deplibs $compiler_flags'
- archive_expsym_cmds_GCJ='$echo "{ global:" > $lib.exp~cat $export_symbols | $SED -e "s/\(.*\)/\1;/" >> $lib.exp~$echo "local: *; };" >> $lib.exp~
- $CC -shared ${wl}-M ${wl}$lib.exp ${wl}-h ${wl}$soname -o $lib $libobjs $deplibs $compiler_flags~$rm $lib.exp'
- else
- wlarc=''
- archive_cmds_GCJ='$LD -G${allow_undefined_flag} -h $soname -o $lib $libobjs $deplibs $linker_flags'
- archive_expsym_cmds_GCJ='$echo "{ global:" > $lib.exp~cat $export_symbols | $SED -e "s/\(.*\)/\1;/" >> $lib.exp~$echo "local: *; };" >> $lib.exp~
- $LD -G${allow_undefined_flag} -M $lib.exp -h $soname -o $lib $libobjs $deplibs $linker_flags~$rm $lib.exp'
- fi
- hardcode_libdir_flag_spec_GCJ='-R$libdir'
- hardcode_shlibpath_var_GCJ=no
- case $host_os in
- solaris2.[0-5] | solaris2.[0-5].*) ;;
- *)
- # The compiler driver will combine and reorder linker options,
- # but understands `-z linker_flag'. GCC discards it without `$wl',
- # but is careful enough not to reorder.
- # Supported since Solaris 2.6 (maybe 2.5.1?)
- if test "$GCC" = yes; then
- whole_archive_flag_spec_GCJ='${wl}-z ${wl}allextract$convenience ${wl}-z ${wl}defaultextract'
- else
- whole_archive_flag_spec_GCJ='-z allextract$convenience -z defaultextract'
- fi
- ;;
- esac
- link_all_deplibs_GCJ=yes
- ;;
-
- sunos4*)
- if test "x$host_vendor" = xsequent; then
- # Use $CC to link under sequent, because it throws in some extra .o
- # files that make .init and .fini sections work.
- archive_cmds_GCJ='$CC -G ${wl}-h $soname -o $lib $libobjs $deplibs $compiler_flags'
- else
- archive_cmds_GCJ='$LD -assert pure-text -Bstatic -o $lib $libobjs $deplibs $linker_flags'
- fi
- hardcode_libdir_flag_spec_GCJ='-L$libdir'
- hardcode_direct_GCJ=yes
- hardcode_minus_L_GCJ=yes
- hardcode_shlibpath_var_GCJ=no
- ;;
-
- sysv4)
- case $host_vendor in
- sni)
- archive_cmds_GCJ='$LD -G -h $soname -o $lib $libobjs $deplibs $linker_flags'
- hardcode_direct_GCJ=yes # is this really true???
- ;;
- siemens)
- ## LD is ld it makes a PLAMLIB
- ## CC just makes a GrossModule.
- archive_cmds_GCJ='$LD -G -o $lib $libobjs $deplibs $linker_flags'
- reload_cmds_GCJ='$CC -r -o $output$reload_objs'
- hardcode_direct_GCJ=no
- ;;
- motorola)
- archive_cmds_GCJ='$LD -G -h $soname -o $lib $libobjs $deplibs $linker_flags'
- hardcode_direct_GCJ=no #Motorola manual says yes, but my tests say they lie
- ;;
- esac
- runpath_var='LD_RUN_PATH'
- hardcode_shlibpath_var_GCJ=no
- ;;
-
- sysv4.3*)
- archive_cmds_GCJ='$LD -G -h $soname -o $lib $libobjs $deplibs $linker_flags'
- hardcode_shlibpath_var_GCJ=no
- export_dynamic_flag_spec_GCJ='-Bexport'
- ;;
-
- sysv4*MP*)
- if test -d /usr/nec; then
- archive_cmds_GCJ='$LD -G -h $soname -o $lib $libobjs $deplibs $linker_flags'
- hardcode_shlibpath_var_GCJ=no
- runpath_var=LD_RUN_PATH
- hardcode_runpath_var=yes
- ld_shlibs_GCJ=yes
- fi
- ;;
-
- sysv4*uw2* | sysv5OpenUNIX* | sysv5UnixWare7.[01].[10]* | unixware7* | sco3.2v5.0.[024]*)
- no_undefined_flag_GCJ='${wl}-z,text'
- archive_cmds_need_lc_GCJ=no
- hardcode_shlibpath_var_GCJ=no
- runpath_var='LD_RUN_PATH'
-
- if test "$GCC" = yes; then
- archive_cmds_GCJ='$CC -shared ${wl}-h,$soname -o $lib $libobjs $deplibs $compiler_flags'
- archive_expsym_cmds_GCJ='$CC -shared ${wl}-Bexport:$export_symbols ${wl}-h,$soname -o $lib $libobjs $deplibs $compiler_flags'
- else
- archive_cmds_GCJ='$CC -G ${wl}-h,$soname -o $lib $libobjs $deplibs $compiler_flags'
- archive_expsym_cmds_GCJ='$CC -G ${wl}-Bexport:$export_symbols ${wl}-h,$soname -o $lib $libobjs $deplibs $compiler_flags'
- fi
- ;;
-
- sysv5* | sco3.2v5* | sco5v6*)
- # Note: We can NOT use -z defs as we might desire, because we do not
- # link with -lc, and that would cause any symbols used from libc to
- # always be unresolved, which means just about no library would
- # ever link correctly. If we're not using GNU ld we use -z text
- # though, which does catch some bad symbols but isn't as heavy-handed
- # as -z defs.
- no_undefined_flag_GCJ='${wl}-z,text'
- allow_undefined_flag_GCJ='${wl}-z,nodefs'
- archive_cmds_need_lc_GCJ=no
- hardcode_shlibpath_var_GCJ=no
- hardcode_libdir_flag_spec_GCJ='`test -z "$SCOABSPATH" && echo ${wl}-R,$libdir`'
- hardcode_libdir_separator_GCJ=':'
- link_all_deplibs_GCJ=yes
- export_dynamic_flag_spec_GCJ='${wl}-Bexport'
- runpath_var='LD_RUN_PATH'
-
- if test "$GCC" = yes; then
- archive_cmds_GCJ='$CC -shared ${wl}-h,\${SCOABSPATH:+${install_libdir}/}$soname -o $lib $libobjs $deplibs $compiler_flags'
- archive_expsym_cmds_GCJ='$CC -shared ${wl}-Bexport:$export_symbols ${wl}-h,\${SCOABSPATH:+${install_libdir}/}$soname -o $lib $libobjs $deplibs $compiler_flags'
- else
- archive_cmds_GCJ='$CC -G ${wl}-h,\${SCOABSPATH:+${install_libdir}/}$soname -o $lib $libobjs $deplibs $compiler_flags'
- archive_expsym_cmds_GCJ='$CC -G ${wl}-Bexport:$export_symbols ${wl}-h,\${SCOABSPATH:+${install_libdir}/}$soname -o $lib $libobjs $deplibs $compiler_flags'
- fi
- ;;
-
- uts4*)
- archive_cmds_GCJ='$LD -G -h $soname -o $lib $libobjs $deplibs $linker_flags'
- hardcode_libdir_flag_spec_GCJ='-L$libdir'
- hardcode_shlibpath_var_GCJ=no
- ;;
-
- *)
- ld_shlibs_GCJ=no
- ;;
- esac
- fi
-
-{ $as_echo "$as_me:$LINENO: result: $ld_shlibs_GCJ" >&5
-$as_echo "$ld_shlibs_GCJ" >&6; }
-test "$ld_shlibs_GCJ" = no && can_build_shared=no
-
-#
-# Do we need to explicitly link libc?
-#
-case "x$archive_cmds_need_lc_GCJ" in
-x|xyes)
- # Assume -lc should be added
- archive_cmds_need_lc_GCJ=yes
-
- if test "$enable_shared" = yes && test "$GCC" = yes; then
- case $archive_cmds_GCJ in
- *'~'*)
- # FIXME: we may have to deal with multi-command sequences.
- ;;
- '$CC '*)
- # Test whether the compiler implicitly links with -lc since on some
- # systems, -lgcc has to come before -lc. If gcc already passes -lc
- # to ld, don't add -lc before -lgcc.
- { $as_echo "$as_me:$LINENO: checking whether -lc should be explicitly linked in" >&5
-$as_echo_n "checking whether -lc should be explicitly linked in... " >&6; }
- $rm conftest*
- echo "$lt_simple_compile_test_code" > conftest.$ac_ext
-
- if { (eval echo "$as_me:$LINENO: \"$ac_compile\"") >&5
- (eval $ac_compile) 2>&5
- ac_status=$?
- $as_echo "$as_me:$LINENO: \$? = $ac_status" >&5
- (exit $ac_status); } 2>conftest.err; then
- soname=conftest
- lib=conftest
- libobjs=conftest.$ac_objext
- deplibs=
- wl=$lt_prog_compiler_wl_GCJ
- pic_flag=$lt_prog_compiler_pic_GCJ
- compiler_flags=-v
- linker_flags=-v
- verstring=
- output_objdir=.
- libname=conftest
- lt_save_allow_undefined_flag=$allow_undefined_flag_GCJ
- allow_undefined_flag_GCJ=
- if { (eval echo "$as_me:$LINENO: \"$archive_cmds_GCJ 2\>\&1 \| grep \" -lc \" \>/dev/null 2\>\&1\"") >&5
- (eval $archive_cmds_GCJ 2\>\&1 \| grep \" -lc \" \>/dev/null 2\>\&1) 2>&5
- ac_status=$?
- $as_echo "$as_me:$LINENO: \$? = $ac_status" >&5
- (exit $ac_status); }
- then
- archive_cmds_need_lc_GCJ=no
- else
- archive_cmds_need_lc_GCJ=yes
- fi
- allow_undefined_flag_GCJ=$lt_save_allow_undefined_flag
- else
- cat conftest.err 1>&5
- fi
- $rm conftest*
- { $as_echo "$as_me:$LINENO: result: $archive_cmds_need_lc_GCJ" >&5
-$as_echo "$archive_cmds_need_lc_GCJ" >&6; }
- ;;
- esac
- fi
- ;;
-esac
-
-{ $as_echo "$as_me:$LINENO: checking dynamic linker characteristics" >&5
-$as_echo_n "checking dynamic linker characteristics... " >&6; }
-library_names_spec=
-libname_spec='lib$name'
-soname_spec=
-shrext_cmds=".so"
-postinstall_cmds=
-postuninstall_cmds=
-finish_cmds=
-finish_eval=
-shlibpath_var=
-shlibpath_overrides_runpath=unknown
-version_type=none
-dynamic_linker="$host_os ld.so"
-sys_lib_dlsearch_path_spec="/lib /usr/lib"
-
-need_lib_prefix=unknown
-hardcode_into_libs=no
-
-# when you set need_version to no, make sure it does not cause -set_version
-# flags to be left without arguments
-need_version=unknown
-
-case $host_os in
-aix3*)
- version_type=linux
- library_names_spec='${libname}${release}${shared_ext}$versuffix $libname.a'
- shlibpath_var=LIBPATH
-
- # AIX 3 has no versioning support, so we append a major version to the name.
- soname_spec='${libname}${release}${shared_ext}$major'
- ;;
-
-aix[4-9]*)
- version_type=linux
- need_lib_prefix=no
- need_version=no
- hardcode_into_libs=yes
- if test "$host_cpu" = ia64; then
- # AIX 5 supports IA64
- library_names_spec='${libname}${release}${shared_ext}$major ${libname}${release}${shared_ext}$versuffix $libname${shared_ext}'
- shlibpath_var=LD_LIBRARY_PATH
- else
- # With GCC up to 2.95.x, collect2 would create an import file
- # for dependence libraries. The import file would start with
- # the line `#! .'. This would cause the generated library to
- # depend on `.', always an invalid library. This was fixed in
- # development snapshots of GCC prior to 3.0.
- case $host_os in
- aix4 | aix4.[01] | aix4.[01].*)
- if { echo '#if __GNUC__ > 2 || (__GNUC__ == 2 && __GNUC_MINOR__ >= 97)'
- echo ' yes '
- echo '#endif'; } | ${CC} -E - | grep yes > /dev/null; then
- :
- else
- can_build_shared=no
- fi
- ;;
- esac
- # AIX (on Power*) has no versioning support, so currently we can not hardcode correct
- # soname into executable. Probably we can add versioning support to
- # collect2, so additional links can be useful in future.
- if test "$aix_use_runtimelinking" = yes; then
- # If using run time linking (on AIX 4.2 or later) use lib<name>.so
- # instead of lib<name>.a to let people know that these are not
- # typical AIX shared libraries.
- library_names_spec='${libname}${release}${shared_ext}$versuffix ${libname}${release}${shared_ext}$major $libname${shared_ext}'
- else
- # We preserve .a as extension for shared libraries through AIX4.2
- # and later when we are not doing run time linking.
- library_names_spec='${libname}${release}.a $libname.a'
- soname_spec='${libname}${release}${shared_ext}$major'
- fi
- shlibpath_var=LIBPATH
- fi
- ;;
-
-amigaos*)
- library_names_spec='$libname.ixlibrary $libname.a'
- # Create ${libname}_ixlibrary.a entries in /sys/libs.
- finish_eval='for lib in `ls $libdir/*.ixlibrary 2>/dev/null`; do libname=`$echo "X$lib" | $Xsed -e '\''s%^.*/\([^/]*\)\.ixlibrary$%\1%'\''`; test $rm /sys/libs/${libname}_ixlibrary.a; $show "cd /sys/libs && $LN_S $lib ${libname}_ixlibrary.a"; cd /sys/libs && $LN_S $lib ${libname}_ixlibrary.a || exit 1; done'
- ;;
-
-beos*)
- library_names_spec='${libname}${shared_ext}'
- dynamic_linker="$host_os ld.so"
- shlibpath_var=LIBRARY_PATH
- ;;
-
-bsdi[45]*)
- version_type=linux
- need_version=no
- library_names_spec='${libname}${release}${shared_ext}$versuffix ${libname}${release}${shared_ext}$major $libname${shared_ext}'
- soname_spec='${libname}${release}${shared_ext}$major'
- finish_cmds='PATH="\$PATH:/sbin" ldconfig $libdir'
- shlibpath_var=LD_LIBRARY_PATH
- sys_lib_search_path_spec="/shlib /usr/lib /usr/X11/lib /usr/contrib/lib /lib /usr/local/lib"
- sys_lib_dlsearch_path_spec="/shlib /usr/lib /usr/local/lib"
- # the default ld.so.conf also contains /usr/contrib/lib and
- # /usr/X11R6/lib (/usr/X11 is a link to /usr/X11R6), but let us allow
- # libtool to hard-code these into programs
- ;;
-
-cygwin* | mingw* | pw32*)
- version_type=windows
- shrext_cmds=".dll"
- need_version=no
- need_lib_prefix=no
-
- case $GCC,$host_os in
- yes,cygwin* | yes,mingw* | yes,pw32*)
- library_names_spec='$libname.dll.a'
- # DLL is installed to $(libdir)/../bin by postinstall_cmds
- postinstall_cmds='base_file=`basename \${file}`~
- dlpath=`$SHELL 2>&1 -c '\''. $dir/'\''\${base_file}'\''i;echo \$dlname'\''`~
- dldir=$destdir/`dirname \$dlpath`~
- test -d \$dldir || mkdir -p \$dldir~
- $install_prog $dir/$dlname \$dldir/$dlname~
- chmod a+x \$dldir/$dlname'
- postuninstall_cmds='dldll=`$SHELL 2>&1 -c '\''. $file; echo \$dlname'\''`~
- dlpath=$dir/\$dldll~
- $rm \$dlpath'
- shlibpath_overrides_runpath=yes
-
- case $host_os in
- cygwin*)
- # Cygwin DLLs use 'cyg' prefix rather than 'lib'
- soname_spec='`echo ${libname} | sed -e 's/^lib/cyg/'``echo ${release} | $SED -e 's/[.]/-/g'`${versuffix}${shared_ext}'
- sys_lib_search_path_spec="/usr/lib /lib/w32api /lib /usr/local/lib"
- ;;
- mingw*)
- # MinGW DLLs use traditional 'lib' prefix
- soname_spec='${libname}`echo ${release} | $SED -e 's/[.]/-/g'`${versuffix}${shared_ext}'
- sys_lib_search_path_spec=`$CC -print-search-dirs | grep "^libraries:" | $SED -e "s/^libraries://" -e "s,=/,/,g"`
- if echo "$sys_lib_search_path_spec" | grep ';[c-zC-Z]:/' >/dev/null; then
- # It is most probably a Windows format PATH printed by
- # mingw gcc, but we are running on Cygwin. Gcc prints its search
- # path with ; separators, and with drive letters. We can handle the
- # drive letters (cygwin fileutils understands them), so leave them,
- # especially as we might pass files found there to a mingw objdump,
- # which wouldn't understand a cygwinified path. Ahh.
- sys_lib_search_path_spec=`echo "$sys_lib_search_path_spec" | $SED -e 's/;/ /g'`
- else
- sys_lib_search_path_spec=`echo "$sys_lib_search_path_spec" | $SED -e "s/$PATH_SEPARATOR/ /g"`
- fi
- ;;
- pw32*)
- # pw32 DLLs use 'pw' prefix rather than 'lib'
- library_names_spec='`echo ${libname} | sed -e 's/^lib/pw/'``echo ${release} | $SED -e 's/[.]/-/g'`${versuffix}${shared_ext}'
- ;;
- esac
- ;;
-
- *)
- library_names_spec='${libname}`echo ${release} | $SED -e 's/[.]/-/g'`${versuffix}${shared_ext} $libname.lib'
- ;;
- esac
- dynamic_linker='Win32 ld.exe'
- # FIXME: first we should search . and the directory the executable is in
- shlibpath_var=PATH
- ;;
-
-darwin* | rhapsody*)
- dynamic_linker="$host_os dyld"
- version_type=darwin
- need_lib_prefix=no
- need_version=no
- library_names_spec='${libname}${release}${versuffix}$shared_ext ${libname}${release}${major}$shared_ext ${libname}$shared_ext'
- soname_spec='${libname}${release}${major}$shared_ext'
- shlibpath_overrides_runpath=yes
- shlibpath_var=DYLD_LIBRARY_PATH
- shrext_cmds='`test .$module = .yes && echo .so || echo .dylib`'
-
- sys_lib_dlsearch_path_spec='/usr/local/lib /lib /usr/lib'
- ;;
-
-dgux*)
- version_type=linux
- need_lib_prefix=no
- need_version=no
- library_names_spec='${libname}${release}${shared_ext}$versuffix ${libname}${release}${shared_ext}$major $libname$shared_ext'
- soname_spec='${libname}${release}${shared_ext}$major'
- shlibpath_var=LD_LIBRARY_PATH
- ;;
-
-freebsd1*)
- dynamic_linker=no
- ;;
-
-freebsd* | dragonfly*)
- # DragonFly does not have aout. When/if they implement a new
- # versioning mechanism, adjust this.
- if test -x /usr/bin/objformat; then
- objformat=`/usr/bin/objformat`
- else
- case $host_os in
- freebsd[123]*) objformat=aout ;;
- *) objformat=elf ;;
- esac
- fi
- version_type=freebsd-$objformat
- case $version_type in
- freebsd-elf*)
- library_names_spec='${libname}${release}${shared_ext}$versuffix ${libname}${release}${shared_ext} $libname${shared_ext}'
- need_version=no
- need_lib_prefix=no
- ;;
- freebsd-*)
- library_names_spec='${libname}${release}${shared_ext}$versuffix $libname${shared_ext}$versuffix'
- need_version=yes
- ;;
- esac
- shlibpath_var=LD_LIBRARY_PATH
- case $host_os in
- freebsd2*)
- shlibpath_overrides_runpath=yes
- ;;
- freebsd3.[01]* | freebsdelf3.[01]*)
- shlibpath_overrides_runpath=yes
- hardcode_into_libs=yes
- ;;
- freebsd3.[2-9]* | freebsdelf3.[2-9]* | \
- freebsd4.[0-5] | freebsdelf4.[0-5] | freebsd4.1.1 | freebsdelf4.1.1)
- shlibpath_overrides_runpath=no
- hardcode_into_libs=yes
- ;;
- *) # from 4.6 on, and DragonFly
- shlibpath_overrides_runpath=yes
- hardcode_into_libs=yes
- ;;
- esac
- ;;
-
-gnu*)
- version_type=linux
- need_lib_prefix=no
- need_version=no
- library_names_spec='${libname}${release}${shared_ext}$versuffix ${libname}${release}${shared_ext}${major} ${libname}${shared_ext}'
- soname_spec='${libname}${release}${shared_ext}$major'
- shlibpath_var=LD_LIBRARY_PATH
- hardcode_into_libs=yes
- ;;
-
-hpux9* | hpux10* | hpux11*)
- # Give a soname corresponding to the major version so that dld.sl refuses to
- # link against other versions.
- version_type=sunos
- need_lib_prefix=no
- need_version=no
- case $host_cpu in
- ia64*)
- shrext_cmds='.so'
- hardcode_into_libs=yes
- dynamic_linker="$host_os dld.so"
- shlibpath_var=LD_LIBRARY_PATH
- shlibpath_overrides_runpath=yes # Unless +noenvvar is specified.
- library_names_spec='${libname}${release}${shared_ext}$versuffix ${libname}${release}${shared_ext}$major $libname${shared_ext}'
- soname_spec='${libname}${release}${shared_ext}$major'
- if test "X$HPUX_IA64_MODE" = X32; then
- sys_lib_search_path_spec="/usr/lib/hpux32 /usr/local/lib/hpux32 /usr/local/lib"
- else
- sys_lib_search_path_spec="/usr/lib/hpux64 /usr/local/lib/hpux64"
- fi
- sys_lib_dlsearch_path_spec=$sys_lib_search_path_spec
- ;;
- hppa*64*)
- shrext_cmds='.sl'
- hardcode_into_libs=yes
- dynamic_linker="$host_os dld.sl"
- shlibpath_var=LD_LIBRARY_PATH # How should we handle SHLIB_PATH
- shlibpath_overrides_runpath=yes # Unless +noenvvar is specified.
- library_names_spec='${libname}${release}${shared_ext}$versuffix ${libname}${release}${shared_ext}$major $libname${shared_ext}'
- soname_spec='${libname}${release}${shared_ext}$major'
- sys_lib_search_path_spec="/usr/lib/pa20_64 /usr/ccs/lib/pa20_64"
- sys_lib_dlsearch_path_spec=$sys_lib_search_path_spec
- ;;
- *)
- shrext_cmds='.sl'
- dynamic_linker="$host_os dld.sl"
- shlibpath_var=SHLIB_PATH
- shlibpath_overrides_runpath=no # +s is required to enable SHLIB_PATH
- library_names_spec='${libname}${release}${shared_ext}$versuffix ${libname}${release}${shared_ext}$major $libname${shared_ext}'
- soname_spec='${libname}${release}${shared_ext}$major'
- ;;
- esac
- # HP-UX runs *really* slowly unless shared libraries are mode 555.
- postinstall_cmds='chmod 555 $lib'
- ;;
-
-interix[3-9]*)
- version_type=linux
- need_lib_prefix=no
- need_version=no
- library_names_spec='${libname}${release}${shared_ext}$versuffix ${libname}${release}${shared_ext}$major ${libname}${shared_ext}'
- soname_spec='${libname}${release}${shared_ext}$major'
- dynamic_linker='Interix 3.x ld.so.1 (PE, like ELF)'
- shlibpath_var=LD_LIBRARY_PATH
- shlibpath_overrides_runpath=no
- hardcode_into_libs=yes
- ;;
-
-irix5* | irix6* | nonstopux*)
- case $host_os in
- nonstopux*) version_type=nonstopux ;;
- *)
- if test "$lt_cv_prog_gnu_ld" = yes; then
- version_type=linux
- else
- version_type=irix
- fi ;;
- esac
- need_lib_prefix=no
- need_version=no
- soname_spec='${libname}${release}${shared_ext}$major'
- library_names_spec='${libname}${release}${shared_ext}$versuffix ${libname}${release}${shared_ext}$major ${libname}${release}${shared_ext} $libname${shared_ext}'
- case $host_os in
- irix5* | nonstopux*)
- libsuff= shlibsuff=
- ;;
- *)
- case $LD in # libtool.m4 will add one of these switches to LD
- *-32|*"-32 "|*-melf32bsmip|*"-melf32bsmip ")
- libsuff= shlibsuff= libmagic=32-bit;;
- *-n32|*"-n32 "|*-melf32bmipn32|*"-melf32bmipn32 ")
- libsuff=32 shlibsuff=N32 libmagic=N32;;
- *-64|*"-64 "|*-melf64bmip|*"-melf64bmip ")
- libsuff=64 shlibsuff=64 libmagic=64-bit;;
- *) libsuff= shlibsuff= libmagic=never-match;;
- esac
- ;;
- esac
- shlibpath_var=LD_LIBRARY${shlibsuff}_PATH
- shlibpath_overrides_runpath=no
- sys_lib_search_path_spec="/usr/lib${libsuff} /lib${libsuff} /usr/local/lib${libsuff}"
- sys_lib_dlsearch_path_spec="/usr/lib${libsuff} /lib${libsuff}"
- hardcode_into_libs=yes
- ;;
-
-# No shared lib support for Linux oldld, aout, or coff.
-linux*oldld* | linux*aout* | linux*coff*)
- dynamic_linker=no
- ;;
-
-# This must be Linux ELF.
-linux* | k*bsd*-gnu)
- version_type=linux
- need_lib_prefix=no
- need_version=no
- library_names_spec='${libname}${release}${shared_ext}$versuffix ${libname}${release}${shared_ext}$major $libname${shared_ext}'
- soname_spec='${libname}${release}${shared_ext}$major'
- finish_cmds='PATH="\$PATH:/sbin" ldconfig -n $libdir'
- shlibpath_var=LD_LIBRARY_PATH
- shlibpath_overrides_runpath=no
- # This implies no fast_install, which is unacceptable.
- # Some rework will be needed to allow for fast_install
- # before this can be enabled.
- hardcode_into_libs=yes
-
- # Append ld.so.conf contents to the search path
- if test -f /etc/ld.so.conf; then
- lt_ld_extra=`awk '/^include / { system(sprintf("cd /etc; cat %s 2>/dev/null", \$2)); skip = 1; } { if (!skip) print \$0; skip = 0; }' < /etc/ld.so.conf | $SED -e 's/#.*//;/^[ ]*hwcap[ ]/d;s/[:, ]/ /g;s/=[^=]*$//;s/=[^= ]* / /g;/^$/d' | tr '\n' ' '`
- sys_lib_dlsearch_path_spec="/lib /usr/lib $lt_ld_extra"
- fi
-
- # We used to test for /lib/ld.so.1 and disable shared libraries on
- # powerpc, because MkLinux only supported shared libraries with the
- # GNU dynamic linker. Since this was broken with cross compilers,
- # most powerpc-linux boxes support dynamic linking these days and
- # people can always --disable-shared, the test was removed, and we
- # assume the GNU/Linux dynamic linker is in use.
- dynamic_linker='GNU/Linux ld.so'
- ;;
-
-netbsd*)
- version_type=sunos
- need_lib_prefix=no
- need_version=no
- if echo __ELF__ | $CC -E - | grep __ELF__ >/dev/null; then
- library_names_spec='${libname}${release}${shared_ext}$versuffix ${libname}${shared_ext}$versuffix'
- finish_cmds='PATH="\$PATH:/sbin" ldconfig -m $libdir'
- dynamic_linker='NetBSD (a.out) ld.so'
- else
- library_names_spec='${libname}${release}${shared_ext}$versuffix ${libname}${release}${shared_ext}$major ${libname}${shared_ext}'
- soname_spec='${libname}${release}${shared_ext}$major'
- dynamic_linker='NetBSD ld.elf_so'
- fi
- shlibpath_var=LD_LIBRARY_PATH
- shlibpath_overrides_runpath=yes
- hardcode_into_libs=yes
- ;;
-
-newsos6)
- version_type=linux
- library_names_spec='${libname}${release}${shared_ext}$versuffix ${libname}${release}${shared_ext}$major $libname${shared_ext}'
- shlibpath_var=LD_LIBRARY_PATH
- shlibpath_overrides_runpath=yes
- ;;
-
-nto-qnx*)
- version_type=linux
- need_lib_prefix=no
- need_version=no
- library_names_spec='${libname}${release}${shared_ext}$versuffix ${libname}${release}${shared_ext}$major $libname${shared_ext}'
- soname_spec='${libname}${release}${shared_ext}$major'
- shlibpath_var=LD_LIBRARY_PATH
- shlibpath_overrides_runpath=yes
- ;;
-
-openbsd*)
- version_type=sunos
- sys_lib_dlsearch_path_spec="/usr/lib"
- need_lib_prefix=no
- # Some older versions of OpenBSD (3.3 at least) *do* need versioned libs.
- case $host_os in
- openbsd3.3 | openbsd3.3.*) need_version=yes ;;
- *) need_version=no ;;
- esac
- library_names_spec='${libname}${release}${shared_ext}$versuffix ${libname}${shared_ext}$versuffix'
- finish_cmds='PATH="\$PATH:/sbin" ldconfig -m $libdir'
- shlibpath_var=LD_LIBRARY_PATH
- if test -z "`echo __ELF__ | $CC -E - | grep __ELF__`" || test "$host_os-$host_cpu" = "openbsd2.8-powerpc"; then
- case $host_os in
- openbsd2.[89] | openbsd2.[89].*)
- shlibpath_overrides_runpath=no
- ;;
- *)
- shlibpath_overrides_runpath=yes
- ;;
- esac
- else
- shlibpath_overrides_runpath=yes
- fi
- ;;
-
-os2*)
- libname_spec='$name'
- shrext_cmds=".dll"
- need_lib_prefix=no
- library_names_spec='$libname${shared_ext} $libname.a'
- dynamic_linker='OS/2 ld.exe'
- shlibpath_var=LIBPATH
- ;;
-
-osf3* | osf4* | osf5*)
- version_type=osf
- need_lib_prefix=no
- need_version=no
- soname_spec='${libname}${release}${shared_ext}$major'
- library_names_spec='${libname}${release}${shared_ext}$versuffix ${libname}${release}${shared_ext}$major $libname${shared_ext}'
- shlibpath_var=LD_LIBRARY_PATH
- sys_lib_search_path_spec="/usr/shlib /usr/ccs/lib /usr/lib/cmplrs/cc /usr/lib /usr/local/lib /var/shlib"
- sys_lib_dlsearch_path_spec="$sys_lib_search_path_spec"
- ;;
-
-rdos*)
- dynamic_linker=no
- ;;
-
-solaris*)
- version_type=linux
- need_lib_prefix=no
- need_version=no
- library_names_spec='${libname}${release}${shared_ext}$versuffix ${libname}${release}${shared_ext}$major $libname${shared_ext}'
- soname_spec='${libname}${release}${shared_ext}$major'
- shlibpath_var=LD_LIBRARY_PATH
- shlibpath_overrides_runpath=yes
- hardcode_into_libs=yes
- # ldd complains unless libraries are executable
- postinstall_cmds='chmod +x $lib'
- ;;
-
-sunos4*)
- version_type=sunos
- library_names_spec='${libname}${release}${shared_ext}$versuffix ${libname}${shared_ext}$versuffix'
- finish_cmds='PATH="\$PATH:/usr/etc" ldconfig $libdir'
- shlibpath_var=LD_LIBRARY_PATH
- shlibpath_overrides_runpath=yes
- if test "$with_gnu_ld" = yes; then
- need_lib_prefix=no
- fi
- need_version=yes
- ;;
-
-sysv4 | sysv4.3*)
- version_type=linux
- library_names_spec='${libname}${release}${shared_ext}$versuffix ${libname}${release}${shared_ext}$major $libname${shared_ext}'
- soname_spec='${libname}${release}${shared_ext}$major'
- shlibpath_var=LD_LIBRARY_PATH
- case $host_vendor in
- sni)
- shlibpath_overrides_runpath=no
- need_lib_prefix=no
- export_dynamic_flag_spec='${wl}-Blargedynsym'
- runpath_var=LD_RUN_PATH
- ;;
- siemens)
- need_lib_prefix=no
- ;;
- motorola)
- need_lib_prefix=no
- need_version=no
- shlibpath_overrides_runpath=no
- sys_lib_search_path_spec='/lib /usr/lib /usr/ccs/lib'
- ;;
- esac
- ;;
-
-sysv4*MP*)
- if test -d /usr/nec ;then
- version_type=linux
- library_names_spec='$libname${shared_ext}.$versuffix $libname${shared_ext}.$major $libname${shared_ext}'
- soname_spec='$libname${shared_ext}.$major'
- shlibpath_var=LD_LIBRARY_PATH
- fi
- ;;
-
-sysv5* | sco3.2v5* | sco5v6* | unixware* | OpenUNIX* | sysv4*uw2*)
- version_type=freebsd-elf
- need_lib_prefix=no
- need_version=no
- library_names_spec='${libname}${release}${shared_ext}$versuffix ${libname}${release}${shared_ext} $libname${shared_ext}'
- soname_spec='${libname}${release}${shared_ext}$major'
- shlibpath_var=LD_LIBRARY_PATH
- hardcode_into_libs=yes
- if test "$with_gnu_ld" = yes; then
- sys_lib_search_path_spec='/usr/local/lib /usr/gnu/lib /usr/ccs/lib /usr/lib /lib'
- shlibpath_overrides_runpath=no
- else
- sys_lib_search_path_spec='/usr/ccs/lib /usr/lib'
- shlibpath_overrides_runpath=yes
- case $host_os in
- sco3.2v5*)
- sys_lib_search_path_spec="$sys_lib_search_path_spec /lib"
- ;;
- esac
- fi
- sys_lib_dlsearch_path_spec='/usr/lib'
- ;;
-
-uts4*)
- version_type=linux
- library_names_spec='${libname}${release}${shared_ext}$versuffix ${libname}${release}${shared_ext}$major $libname${shared_ext}'
- soname_spec='${libname}${release}${shared_ext}$major'
- shlibpath_var=LD_LIBRARY_PATH
- ;;
-
-*)
- dynamic_linker=no
- ;;
-esac
-{ $as_echo "$as_me:$LINENO: result: $dynamic_linker" >&5
-$as_echo "$dynamic_linker" >&6; }
-test "$dynamic_linker" = no && can_build_shared=no
-
-if test "${lt_cv_sys_lib_search_path_spec+set}" = set; then
- $as_echo_n "(cached) " >&6
-else
- lt_cv_sys_lib_search_path_spec="$sys_lib_search_path_spec"
-fi
-
-sys_lib_search_path_spec="$lt_cv_sys_lib_search_path_spec"
-if test "${lt_cv_sys_lib_dlsearch_path_spec+set}" = set; then
- $as_echo_n "(cached) " >&6
-else
- lt_cv_sys_lib_dlsearch_path_spec="$sys_lib_dlsearch_path_spec"
-fi
-
-sys_lib_dlsearch_path_spec="$lt_cv_sys_lib_dlsearch_path_spec"
-
-variables_saved_for_relink="PATH $shlibpath_var $runpath_var"
-if test "$GCC" = yes; then
- variables_saved_for_relink="$variables_saved_for_relink GCC_EXEC_PREFIX COMPILER_PATH LIBRARY_PATH"
-fi
-
-{ $as_echo "$as_me:$LINENO: checking how to hardcode library paths into programs" >&5
-$as_echo_n "checking how to hardcode library paths into programs... " >&6; }
-hardcode_action_GCJ=
-if test -n "$hardcode_libdir_flag_spec_GCJ" || \
- test -n "$runpath_var_GCJ" || \
- test "X$hardcode_automatic_GCJ" = "Xyes" ; then
-
- # We can hardcode non-existant directories.
- if test "$hardcode_direct_GCJ" != no &&
- # If the only mechanism to avoid hardcoding is shlibpath_var, we
- # have to relink, otherwise we might link with an installed library
- # when we should be linking with a yet-to-be-installed one
- ## test "$_LT_AC_TAGVAR(hardcode_shlibpath_var, GCJ)" != no &&
- test "$hardcode_minus_L_GCJ" != no; then
- # Linking always hardcodes the temporary library directory.
- hardcode_action_GCJ=relink
- else
- # We can link without hardcoding, and we can hardcode nonexisting dirs.
- hardcode_action_GCJ=immediate
- fi
-else
- # We cannot hardcode anything, or else we can only hardcode existing
- # directories.
- hardcode_action_GCJ=unsupported
-fi
-{ $as_echo "$as_me:$LINENO: result: $hardcode_action_GCJ" >&5
-$as_echo "$hardcode_action_GCJ" >&6; }
-
-if test "$hardcode_action_GCJ" = relink; then
- # Fast installation is not supported
- enable_fast_install=no
-elif test "$shlibpath_overrides_runpath" = yes ||
- test "$enable_shared" = no; then
- # Fast installation is not necessary
- enable_fast_install=needless
-fi
-
-
-# The else clause should only fire when bootstrapping the
-# libtool distribution, otherwise you forgot to ship ltmain.sh
-# with your package, and you will get complaints that there are
-# no rules to generate ltmain.sh.
-if test -f "$ltmain"; then
- # See if we are running on zsh, and set the options which allow our commands through
- # without removal of \ escapes.
- if test -n "${ZSH_VERSION+set}" ; then
- setopt NO_GLOB_SUBST
- fi
- # Now quote all the things that may contain metacharacters while being
- # careful not to overquote the AC_SUBSTed values. We take copies of the
- # variables and quote the copies for generation of the libtool script.
- for var in echo old_CC old_CFLAGS AR AR_FLAGS EGREP RANLIB LN_S LTCC LTCFLAGS NM \
- SED SHELL STRIP \
- libname_spec library_names_spec soname_spec extract_expsyms_cmds \
- old_striplib striplib file_magic_cmd finish_cmds finish_eval \
- deplibs_check_method reload_flag reload_cmds need_locks \
- lt_cv_sys_global_symbol_pipe lt_cv_sys_global_symbol_to_cdecl \
- lt_cv_sys_global_symbol_to_c_name_address \
- sys_lib_search_path_spec sys_lib_dlsearch_path_spec \
- old_postinstall_cmds old_postuninstall_cmds \
- compiler_GCJ \
- CC_GCJ \
- LD_GCJ \
- lt_prog_compiler_wl_GCJ \
- lt_prog_compiler_pic_GCJ \
- lt_prog_compiler_static_GCJ \
- lt_prog_compiler_no_builtin_flag_GCJ \
- export_dynamic_flag_spec_GCJ \
- thread_safe_flag_spec_GCJ \
- whole_archive_flag_spec_GCJ \
- enable_shared_with_static_runtimes_GCJ \
- old_archive_cmds_GCJ \
- old_archive_from_new_cmds_GCJ \
- predep_objects_GCJ \
- postdep_objects_GCJ \
- predeps_GCJ \
- postdeps_GCJ \
- compiler_lib_search_path_GCJ \
- compiler_lib_search_dirs_GCJ \
- archive_cmds_GCJ \
- archive_expsym_cmds_GCJ \
- postinstall_cmds_GCJ \
- postuninstall_cmds_GCJ \
- old_archive_from_expsyms_cmds_GCJ \
- allow_undefined_flag_GCJ \
- no_undefined_flag_GCJ \
- export_symbols_cmds_GCJ \
- hardcode_libdir_flag_spec_GCJ \
- hardcode_libdir_flag_spec_ld_GCJ \
- hardcode_libdir_separator_GCJ \
- hardcode_automatic_GCJ \
- module_cmds_GCJ \
- module_expsym_cmds_GCJ \
- lt_cv_prog_compiler_c_o_GCJ \
- fix_srcfile_path_GCJ \
- exclude_expsyms_GCJ \
- include_expsyms_GCJ; do
-
- case $var in
- old_archive_cmds_GCJ | \
- old_archive_from_new_cmds_GCJ | \
- archive_cmds_GCJ | \
- archive_expsym_cmds_GCJ | \
- module_cmds_GCJ | \
- module_expsym_cmds_GCJ | \
- old_archive_from_expsyms_cmds_GCJ | \
- export_symbols_cmds_GCJ | \
- extract_expsyms_cmds | reload_cmds | finish_cmds | \
- postinstall_cmds | postuninstall_cmds | \
- old_postinstall_cmds | old_postuninstall_cmds | \
- sys_lib_search_path_spec | sys_lib_dlsearch_path_spec)
- # Double-quote double-evaled strings.
- eval "lt_$var=\\\"\`\$echo \"X\$$var\" | \$Xsed -e \"\$double_quote_subst\" -e \"\$sed_quote_subst\" -e \"\$delay_variable_subst\"\`\\\""
- ;;
- *)
- eval "lt_$var=\\\"\`\$echo \"X\$$var\" | \$Xsed -e \"\$sed_quote_subst\"\`\\\""
- ;;
- esac
- done
-
- case $lt_echo in
- *'\$0 --fallback-echo"')
- lt_echo=`$echo "X$lt_echo" | $Xsed -e 's/\\\\\\\$0 --fallback-echo"$/$0 --fallback-echo"/'`
- ;;
- esac
-
-cfgfile="$ofile"
-
- cat <<__EOF__ >> "$cfgfile"
-# ### BEGIN LIBTOOL TAG CONFIG: $tagname
-
-# Libtool was configured on host `(hostname || uname -n) 2>/dev/null | sed 1q`:
-
-# Shell to use when invoking shell scripts.
-SHELL=$lt_SHELL
-
-# Whether or not to build shared libraries.
-build_libtool_libs=$enable_shared
-
-# Whether or not to build static libraries.
-build_old_libs=$enable_static
-
-# Whether or not to add -lc for building shared libraries.
-build_libtool_need_lc=$archive_cmds_need_lc_GCJ
-
-# Whether or not to disallow shared libs when runtime libs are static
-allow_libtool_libs_with_static_runtimes=$enable_shared_with_static_runtimes_GCJ
-
-# Whether or not to optimize for fast installation.
-fast_install=$enable_fast_install
-
-# The host system.
-host_alias=$host_alias
-host=$host
-host_os=$host_os
-
-# The build system.
-build_alias=$build_alias
-build=$build
-build_os=$build_os
-
-# An echo program that does not interpret backslashes.
-echo=$lt_echo
-
-# The archiver.
-AR=$lt_AR
-AR_FLAGS=$lt_AR_FLAGS
-
-# A C compiler.
-LTCC=$lt_LTCC
-
-# LTCC compiler flags.
-LTCFLAGS=$lt_LTCFLAGS
-
-# A language-specific compiler.
-CC=$lt_compiler_GCJ
-
-# Is the compiler the GNU C compiler?
-with_gcc=$GCC_GCJ
-
-# An ERE matcher.
-EGREP=$lt_EGREP
-
-# The linker used to build libraries.
-LD=$lt_LD_GCJ
-
-# Whether we need hard or soft links.
-LN_S=$lt_LN_S
-
-# A BSD-compatible nm program.
-NM=$lt_NM
-
-# A symbol stripping program
-STRIP=$lt_STRIP
-
-# Used to examine libraries when file_magic_cmd begins "file"
-MAGIC_CMD=$MAGIC_CMD
-
-# Used on cygwin: DLL creation program.
-DLLTOOL="$DLLTOOL"
-
-# Used on cygwin: object dumper.
-OBJDUMP="$OBJDUMP"
-
-# Used on cygwin: assembler.
-AS="$AS"
-
-# The name of the directory that contains temporary libtool files.
-objdir=$objdir
-
-# How to create reloadable object files.
-reload_flag=$lt_reload_flag
-reload_cmds=$lt_reload_cmds
-
-# How to pass a linker flag through the compiler.
-wl=$lt_lt_prog_compiler_wl_GCJ
-
-# Object file suffix (normally "o").
-objext="$ac_objext"
-
-# Old archive suffix (normally "a").
-libext="$libext"
-
-# Shared library suffix (normally ".so").
-shrext_cmds='$shrext_cmds'
-
-# Executable file suffix (normally "").
-exeext="$exeext"
-
-# Additional compiler flags for building library objects.
-pic_flag=$lt_lt_prog_compiler_pic_GCJ
-pic_mode=$pic_mode
-
-# What is the maximum length of a command?
-max_cmd_len=$lt_cv_sys_max_cmd_len
-
-# Does compiler simultaneously support -c and -o options?
-compiler_c_o=$lt_lt_cv_prog_compiler_c_o_GCJ
-
-# Must we lock files when doing compilation?
-need_locks=$lt_need_locks
-
-# Do we need the lib prefix for modules?
-need_lib_prefix=$need_lib_prefix
-
-# Do we need a version for libraries?
-need_version=$need_version
-
-# Whether dlopen is supported.
-dlopen_support=$enable_dlopen
-
-# Whether dlopen of programs is supported.
-dlopen_self=$enable_dlopen_self
-
-# Whether dlopen of statically linked programs is supported.
-dlopen_self_static=$enable_dlopen_self_static
-
-# Compiler flag to prevent dynamic linking.
-link_static_flag=$lt_lt_prog_compiler_static_GCJ
-
-# Compiler flag to turn off builtin functions.
-no_builtin_flag=$lt_lt_prog_compiler_no_builtin_flag_GCJ
-
-# Compiler flag to allow reflexive dlopens.
-export_dynamic_flag_spec=$lt_export_dynamic_flag_spec_GCJ
-
-# Compiler flag to generate shared objects directly from archives.
-whole_archive_flag_spec=$lt_whole_archive_flag_spec_GCJ
-
-# Compiler flag to generate thread-safe objects.
-thread_safe_flag_spec=$lt_thread_safe_flag_spec_GCJ
-
-# Library versioning type.
-version_type=$version_type
-
-# Format of library name prefix.
-libname_spec=$lt_libname_spec
-
-# List of archive names. First name is the real one, the rest are links.
-# The last name is the one that the linker finds with -lNAME.
-library_names_spec=$lt_library_names_spec
-
-# The coded name of the library, if different from the real name.
-soname_spec=$lt_soname_spec
-
-# Commands used to build and install an old-style archive.
-RANLIB=$lt_RANLIB
-old_archive_cmds=$lt_old_archive_cmds_GCJ
-old_postinstall_cmds=$lt_old_postinstall_cmds
-old_postuninstall_cmds=$lt_old_postuninstall_cmds
-
-# Create an old-style archive from a shared archive.
-old_archive_from_new_cmds=$lt_old_archive_from_new_cmds_GCJ
-
-# Create a temporary old-style archive to link instead of a shared archive.
-old_archive_from_expsyms_cmds=$lt_old_archive_from_expsyms_cmds_GCJ
-
-# Commands used to build and install a shared archive.
-archive_cmds=$lt_archive_cmds_GCJ
-archive_expsym_cmds=$lt_archive_expsym_cmds_GCJ
-postinstall_cmds=$lt_postinstall_cmds
-postuninstall_cmds=$lt_postuninstall_cmds
-
-# Commands used to build a loadable module (assumed same as above if empty)
-module_cmds=$lt_module_cmds_GCJ
-module_expsym_cmds=$lt_module_expsym_cmds_GCJ
-
-# Commands to strip libraries.
-old_striplib=$lt_old_striplib
-striplib=$lt_striplib
-
-# Dependencies to place before the objects being linked to create a
-# shared library.
-predep_objects=$lt_predep_objects_GCJ
-
-# Dependencies to place after the objects being linked to create a
-# shared library.
-postdep_objects=$lt_postdep_objects_GCJ
-
-# Dependencies to place before the objects being linked to create a
-# shared library.
-predeps=$lt_predeps_GCJ
-
-# Dependencies to place after the objects being linked to create a
-# shared library.
-postdeps=$lt_postdeps_GCJ
-
-# The directories searched by this compiler when creating a shared
-# library
-compiler_lib_search_dirs=$lt_compiler_lib_search_dirs_GCJ
-
-# The library search path used internally by the compiler when linking
-# a shared library.
-compiler_lib_search_path=$lt_compiler_lib_search_path_GCJ
-
-# Method to check whether dependent libraries are shared objects.
-deplibs_check_method=$lt_deplibs_check_method
-
-# Command to use when deplibs_check_method == file_magic.
-file_magic_cmd=$lt_file_magic_cmd
-
-# Flag that allows shared libraries with undefined symbols to be built.
-allow_undefined_flag=$lt_allow_undefined_flag_GCJ
-
-# Flag that forces no undefined symbols.
-no_undefined_flag=$lt_no_undefined_flag_GCJ
-
-# Commands used to finish a libtool library installation in a directory.
-finish_cmds=$lt_finish_cmds
-
-# Same as above, but a single script fragment to be evaled but not shown.
-finish_eval=$lt_finish_eval
-
-# Take the output of nm and produce a listing of raw symbols and C names.
-global_symbol_pipe=$lt_lt_cv_sys_global_symbol_pipe
-
-# Transform the output of nm in a proper C declaration
-global_symbol_to_cdecl=$lt_lt_cv_sys_global_symbol_to_cdecl
-
-# Transform the output of nm in a C name address pair
-global_symbol_to_c_name_address=$lt_lt_cv_sys_global_symbol_to_c_name_address
-
-# This is the shared library runtime path variable.
-runpath_var=$runpath_var
-
-# This is the shared library path variable.
-shlibpath_var=$shlibpath_var
-
-# Is shlibpath searched before the hard-coded library search path?
-shlibpath_overrides_runpath=$shlibpath_overrides_runpath
-
-# How to hardcode a shared library path into an executable.
-hardcode_action=$hardcode_action_GCJ
-
-# Whether we should hardcode library paths into libraries.
-hardcode_into_libs=$hardcode_into_libs
-
-# Flag to hardcode \$libdir into a binary during linking.
-# This must work even if \$libdir does not exist.
-hardcode_libdir_flag_spec=$lt_hardcode_libdir_flag_spec_GCJ
-
-# If ld is used when linking, flag to hardcode \$libdir into
-# a binary during linking. This must work even if \$libdir does
-# not exist.
-hardcode_libdir_flag_spec_ld=$lt_hardcode_libdir_flag_spec_ld_GCJ
-
-# Whether we need a single -rpath flag with a separated argument.
-hardcode_libdir_separator=$lt_hardcode_libdir_separator_GCJ
-
-# Set to yes if using DIR/libNAME${shared_ext} during linking hardcodes DIR into the
-# resulting binary.
-hardcode_direct=$hardcode_direct_GCJ
-
-# Set to yes if using the -LDIR flag during linking hardcodes DIR into the
-# resulting binary.
-hardcode_minus_L=$hardcode_minus_L_GCJ
-
-# Set to yes if using SHLIBPATH_VAR=DIR during linking hardcodes DIR into
-# the resulting binary.
-hardcode_shlibpath_var=$hardcode_shlibpath_var_GCJ
-
-# Set to yes if building a shared library automatically hardcodes DIR into the library
-# and all subsequent libraries and executables linked against it.
-hardcode_automatic=$hardcode_automatic_GCJ
-
-# Variables whose values should be saved in libtool wrapper scripts and
-# restored at relink time.
-variables_saved_for_relink="$variables_saved_for_relink"
-
-# Whether libtool must link a program against all its dependency libraries.
-link_all_deplibs=$link_all_deplibs_GCJ
-
-# Compile-time system search path for libraries
-sys_lib_search_path_spec=$lt_sys_lib_search_path_spec
-
-# Run-time system search path for libraries
-sys_lib_dlsearch_path_spec=$lt_sys_lib_dlsearch_path_spec
-
-# Fix the shell variable \$srcfile for the compiler.
-fix_srcfile_path=$lt_fix_srcfile_path
-
-# Set to yes if exported symbols are required.
-always_export_symbols=$always_export_symbols_GCJ
-
-# The commands to list exported symbols.
-export_symbols_cmds=$lt_export_symbols_cmds_GCJ
-
-# The commands to extract the exported symbol list from a shared archive.
-extract_expsyms_cmds=$lt_extract_expsyms_cmds
-
-# Symbols that should not be listed in the preloaded symbols.
-exclude_expsyms=$lt_exclude_expsyms_GCJ
-
-# Symbols that must always be exported.
-include_expsyms=$lt_include_expsyms_GCJ
-
-# ### END LIBTOOL TAG CONFIG: $tagname
-
-__EOF__
-
-
-else
- # If there is no Makefile yet, we rely on a make rule to execute
- # `config.status --recheck' to rerun these tests and create the
- # libtool script then.
- ltmain_in=`echo $ltmain | sed -e 's/\.sh$/.in/'`
- if test -f "$ltmain_in"; then
- test -f Makefile && make "$ltmain"
- fi
-fi
-
-
-ac_ext=c
-ac_cpp='$CPP $CPPFLAGS'
-ac_compile='$CC -c $CFLAGS $CPPFLAGS conftest.$ac_ext >&5'
-ac_link='$CC -o conftest$ac_exeext $CFLAGS $CPPFLAGS $LDFLAGS conftest.$ac_ext $LIBS >&5'
-ac_compiler_gnu=$ac_cv_c_compiler_gnu
-
-CC="$lt_save_CC"
-
- else
- tagname=""
- fi
- ;;
-
- RC)
-
-
-# Source file extension for RC test sources.
-ac_ext=rc
-
-# Object file extension for compiled RC test sources.
-objext=o
-objext_RC=$objext
-
-# Code to be used in simple compile tests
-lt_simple_compile_test_code='sample MENU { MENUITEM "&Soup", 100, CHECKED }'
-
-# Code to be used in simple link tests
-lt_simple_link_test_code="$lt_simple_compile_test_code"
-
-# ltmain only uses $CC for tagged configurations so make sure $CC is set.
-
-# If no C compiler was specified, use CC.
-LTCC=${LTCC-"$CC"}
-
-# If no C compiler flags were specified, use CFLAGS.
-LTCFLAGS=${LTCFLAGS-"$CFLAGS"}
-
-# Allow CC to be a program name with arguments.
-compiler=$CC
-
-
-# save warnings/boilerplate of simple test code
-ac_outfile=conftest.$ac_objext
-echo "$lt_simple_compile_test_code" >conftest.$ac_ext
-eval "$ac_compile" 2>&1 >/dev/null | $SED '/^$/d; /^ *+/d' >conftest.err
-_lt_compiler_boilerplate=`cat conftest.err`
-$rm conftest*
-
-ac_outfile=conftest.$ac_objext
-echo "$lt_simple_link_test_code" >conftest.$ac_ext
-eval "$ac_link" 2>&1 >/dev/null | $SED '/^$/d; /^ *+/d' >conftest.err
-_lt_linker_boilerplate=`cat conftest.err`
-$rm -r conftest*
-
-
-# Allow CC to be a program name with arguments.
-lt_save_CC="$CC"
-CC=${RC-"windres"}
-compiler=$CC
-compiler_RC=$CC
-for cc_temp in $compiler""; do
- case $cc_temp in
- compile | *[\\/]compile | ccache | *[\\/]ccache ) ;;
- distcc | *[\\/]distcc | purify | *[\\/]purify ) ;;
- \-*) ;;
- *) break;;
- esac
-done
-cc_basename=`$echo "X$cc_temp" | $Xsed -e 's%.*/%%' -e "s%^$host_alias-%%"`
-
-lt_cv_prog_compiler_c_o_RC=yes
-
-# The else clause should only fire when bootstrapping the
-# libtool distribution, otherwise you forgot to ship ltmain.sh
-# with your package, and you will get complaints that there are
-# no rules to generate ltmain.sh.
-if test -f "$ltmain"; then
- # See if we are running on zsh, and set the options which allow our commands through
- # without removal of \ escapes.
- if test -n "${ZSH_VERSION+set}" ; then
- setopt NO_GLOB_SUBST
- fi
- # Now quote all the things that may contain metacharacters while being
- # careful not to overquote the AC_SUBSTed values. We take copies of the
- # variables and quote the copies for generation of the libtool script.
- for var in echo old_CC old_CFLAGS AR AR_FLAGS EGREP RANLIB LN_S LTCC LTCFLAGS NM \
- SED SHELL STRIP \
- libname_spec library_names_spec soname_spec extract_expsyms_cmds \
- old_striplib striplib file_magic_cmd finish_cmds finish_eval \
- deplibs_check_method reload_flag reload_cmds need_locks \
- lt_cv_sys_global_symbol_pipe lt_cv_sys_global_symbol_to_cdecl \
- lt_cv_sys_global_symbol_to_c_name_address \
- sys_lib_search_path_spec sys_lib_dlsearch_path_spec \
- old_postinstall_cmds old_postuninstall_cmds \
- compiler_RC \
- CC_RC \
- LD_RC \
- lt_prog_compiler_wl_RC \
- lt_prog_compiler_pic_RC \
- lt_prog_compiler_static_RC \
- lt_prog_compiler_no_builtin_flag_RC \
- export_dynamic_flag_spec_RC \
- thread_safe_flag_spec_RC \
- whole_archive_flag_spec_RC \
- enable_shared_with_static_runtimes_RC \
- old_archive_cmds_RC \
- old_archive_from_new_cmds_RC \
- predep_objects_RC \
- postdep_objects_RC \
- predeps_RC \
- postdeps_RC \
- compiler_lib_search_path_RC \
- compiler_lib_search_dirs_RC \
- archive_cmds_RC \
- archive_expsym_cmds_RC \
- postinstall_cmds_RC \
- postuninstall_cmds_RC \
- old_archive_from_expsyms_cmds_RC \
- allow_undefined_flag_RC \
- no_undefined_flag_RC \
- export_symbols_cmds_RC \
- hardcode_libdir_flag_spec_RC \
- hardcode_libdir_flag_spec_ld_RC \
- hardcode_libdir_separator_RC \
- hardcode_automatic_RC \
- module_cmds_RC \
- module_expsym_cmds_RC \
- lt_cv_prog_compiler_c_o_RC \
- fix_srcfile_path_RC \
- exclude_expsyms_RC \
- include_expsyms_RC; do
-
- case $var in
- old_archive_cmds_RC | \
- old_archive_from_new_cmds_RC | \
- archive_cmds_RC | \
- archive_expsym_cmds_RC | \
- module_cmds_RC | \
- module_expsym_cmds_RC | \
- old_archive_from_expsyms_cmds_RC | \
- export_symbols_cmds_RC | \
- extract_expsyms_cmds | reload_cmds | finish_cmds | \
- postinstall_cmds | postuninstall_cmds | \
- old_postinstall_cmds | old_postuninstall_cmds | \
- sys_lib_search_path_spec | sys_lib_dlsearch_path_spec)
- # Double-quote double-evaled strings.
- eval "lt_$var=\\\"\`\$echo \"X\$$var\" | \$Xsed -e \"\$double_quote_subst\" -e \"\$sed_quote_subst\" -e \"\$delay_variable_subst\"\`\\\""
- ;;
- *)
- eval "lt_$var=\\\"\`\$echo \"X\$$var\" | \$Xsed -e \"\$sed_quote_subst\"\`\\\""
- ;;
- esac
- done
-
- case $lt_echo in
- *'\$0 --fallback-echo"')
- lt_echo=`$echo "X$lt_echo" | $Xsed -e 's/\\\\\\\$0 --fallback-echo"$/$0 --fallback-echo"/'`
- ;;
- esac
-
-cfgfile="$ofile"
-
- cat <<__EOF__ >> "$cfgfile"
-# ### BEGIN LIBTOOL TAG CONFIG: $tagname
-
-# Libtool was configured on host `(hostname || uname -n) 2>/dev/null | sed 1q`:
-
-# Shell to use when invoking shell scripts.
-SHELL=$lt_SHELL
-
-# Whether or not to build shared libraries.
-build_libtool_libs=$enable_shared
-
-# Whether or not to build static libraries.
-build_old_libs=$enable_static
-
-# Whether or not to add -lc for building shared libraries.
-build_libtool_need_lc=$archive_cmds_need_lc_RC
-
-# Whether or not to disallow shared libs when runtime libs are static
-allow_libtool_libs_with_static_runtimes=$enable_shared_with_static_runtimes_RC
-
-# Whether or not to optimize for fast installation.
-fast_install=$enable_fast_install
-
-# The host system.
-host_alias=$host_alias
-host=$host
-host_os=$host_os
-
-# The build system.
-build_alias=$build_alias
-build=$build
-build_os=$build_os
-
-# An echo program that does not interpret backslashes.
-echo=$lt_echo
-
-# The archiver.
-AR=$lt_AR
-AR_FLAGS=$lt_AR_FLAGS
-
-# A C compiler.
-LTCC=$lt_LTCC
-
-# LTCC compiler flags.
-LTCFLAGS=$lt_LTCFLAGS
-
-# A language-specific compiler.
-CC=$lt_compiler_RC
-
-# Is the compiler the GNU C compiler?
-with_gcc=$GCC_RC
-
-# An ERE matcher.
-EGREP=$lt_EGREP
-
-# The linker used to build libraries.
-LD=$lt_LD_RC
-
-# Whether we need hard or soft links.
-LN_S=$lt_LN_S
-
-# A BSD-compatible nm program.
-NM=$lt_NM
-
-# A symbol stripping program
-STRIP=$lt_STRIP
-
-# Used to examine libraries when file_magic_cmd begins "file"
-MAGIC_CMD=$MAGIC_CMD
-
-# Used on cygwin: DLL creation program.
-DLLTOOL="$DLLTOOL"
-
-# Used on cygwin: object dumper.
-OBJDUMP="$OBJDUMP"
-
-# Used on cygwin: assembler.
-AS="$AS"
-
-# The name of the directory that contains temporary libtool files.
-objdir=$objdir
-
-# How to create reloadable object files.
-reload_flag=$lt_reload_flag
-reload_cmds=$lt_reload_cmds
-
-# How to pass a linker flag through the compiler.
-wl=$lt_lt_prog_compiler_wl_RC
-
-# Object file suffix (normally "o").
-objext="$ac_objext"
-
-# Old archive suffix (normally "a").
-libext="$libext"
-
-# Shared library suffix (normally ".so").
-shrext_cmds='$shrext_cmds'
-
-# Executable file suffix (normally "").
-exeext="$exeext"
-
-# Additional compiler flags for building library objects.
-pic_flag=$lt_lt_prog_compiler_pic_RC
-pic_mode=$pic_mode
-
-# What is the maximum length of a command?
-max_cmd_len=$lt_cv_sys_max_cmd_len
-
-# Does compiler simultaneously support -c and -o options?
-compiler_c_o=$lt_lt_cv_prog_compiler_c_o_RC
-
-# Must we lock files when doing compilation?
-need_locks=$lt_need_locks
-
-# Do we need the lib prefix for modules?
-need_lib_prefix=$need_lib_prefix
-
-# Do we need a version for libraries?
-need_version=$need_version
-
-# Whether dlopen is supported.
-dlopen_support=$enable_dlopen
-
-# Whether dlopen of programs is supported.
-dlopen_self=$enable_dlopen_self
-
-# Whether dlopen of statically linked programs is supported.
-dlopen_self_static=$enable_dlopen_self_static
-
-# Compiler flag to prevent dynamic linking.
-link_static_flag=$lt_lt_prog_compiler_static_RC
-
-# Compiler flag to turn off builtin functions.
-no_builtin_flag=$lt_lt_prog_compiler_no_builtin_flag_RC
-
-# Compiler flag to allow reflexive dlopens.
-export_dynamic_flag_spec=$lt_export_dynamic_flag_spec_RC
-
-# Compiler flag to generate shared objects directly from archives.
-whole_archive_flag_spec=$lt_whole_archive_flag_spec_RC
-
-# Compiler flag to generate thread-safe objects.
-thread_safe_flag_spec=$lt_thread_safe_flag_spec_RC
-
-# Library versioning type.
-version_type=$version_type
-
-# Format of library name prefix.
-libname_spec=$lt_libname_spec
-
-# List of archive names. First name is the real one, the rest are links.
-# The last name is the one that the linker finds with -lNAME.
-library_names_spec=$lt_library_names_spec
-
-# The coded name of the library, if different from the real name.
-soname_spec=$lt_soname_spec
-
-# Commands used to build and install an old-style archive.
-RANLIB=$lt_RANLIB
-old_archive_cmds=$lt_old_archive_cmds_RC
-old_postinstall_cmds=$lt_old_postinstall_cmds
-old_postuninstall_cmds=$lt_old_postuninstall_cmds
-
-# Create an old-style archive from a shared archive.
-old_archive_from_new_cmds=$lt_old_archive_from_new_cmds_RC
-
-# Create a temporary old-style archive to link instead of a shared archive.
-old_archive_from_expsyms_cmds=$lt_old_archive_from_expsyms_cmds_RC
-
-# Commands used to build and install a shared archive.
-archive_cmds=$lt_archive_cmds_RC
-archive_expsym_cmds=$lt_archive_expsym_cmds_RC
-postinstall_cmds=$lt_postinstall_cmds
-postuninstall_cmds=$lt_postuninstall_cmds
-
-# Commands used to build a loadable module (assumed same as above if empty)
-module_cmds=$lt_module_cmds_RC
-module_expsym_cmds=$lt_module_expsym_cmds_RC
-
-# Commands to strip libraries.
-old_striplib=$lt_old_striplib
-striplib=$lt_striplib
-
-# Dependencies to place before the objects being linked to create a
-# shared library.
-predep_objects=$lt_predep_objects_RC
-
-# Dependencies to place after the objects being linked to create a
-# shared library.
-postdep_objects=$lt_postdep_objects_RC
-
-# Dependencies to place before the objects being linked to create a
-# shared library.
-predeps=$lt_predeps_RC
-
-# Dependencies to place after the objects being linked to create a
-# shared library.
-postdeps=$lt_postdeps_RC
-
-# The directories searched by this compiler when creating a shared
-# library
-compiler_lib_search_dirs=$lt_compiler_lib_search_dirs_RC
-
-# The library search path used internally by the compiler when linking
-# a shared library.
-compiler_lib_search_path=$lt_compiler_lib_search_path_RC
-
-# Method to check whether dependent libraries are shared objects.
-deplibs_check_method=$lt_deplibs_check_method
-
-# Command to use when deplibs_check_method == file_magic.
-file_magic_cmd=$lt_file_magic_cmd
-
-# Flag that allows shared libraries with undefined symbols to be built.
-allow_undefined_flag=$lt_allow_undefined_flag_RC
-
-# Flag that forces no undefined symbols.
-no_undefined_flag=$lt_no_undefined_flag_RC
-
-# Commands used to finish a libtool library installation in a directory.
-finish_cmds=$lt_finish_cmds
-
-# Same as above, but a single script fragment to be evaled but not shown.
-finish_eval=$lt_finish_eval
-
-# Take the output of nm and produce a listing of raw symbols and C names.
-global_symbol_pipe=$lt_lt_cv_sys_global_symbol_pipe
-
-# Transform the output of nm in a proper C declaration
-global_symbol_to_cdecl=$lt_lt_cv_sys_global_symbol_to_cdecl
-
-# Transform the output of nm in a C name address pair
-global_symbol_to_c_name_address=$lt_lt_cv_sys_global_symbol_to_c_name_address
-
-# This is the shared library runtime path variable.
-runpath_var=$runpath_var
-
-# This is the shared library path variable.
-shlibpath_var=$shlibpath_var
-
-# Is shlibpath searched before the hard-coded library search path?
-shlibpath_overrides_runpath=$shlibpath_overrides_runpath
-
-# How to hardcode a shared library path into an executable.
-hardcode_action=$hardcode_action_RC
-
-# Whether we should hardcode library paths into libraries.
-hardcode_into_libs=$hardcode_into_libs
-
-# Flag to hardcode \$libdir into a binary during linking.
-# This must work even if \$libdir does not exist.
-hardcode_libdir_flag_spec=$lt_hardcode_libdir_flag_spec_RC
-
-# If ld is used when linking, flag to hardcode \$libdir into
-# a binary during linking. This must work even if \$libdir does
-# not exist.
-hardcode_libdir_flag_spec_ld=$lt_hardcode_libdir_flag_spec_ld_RC
-
-# Whether we need a single -rpath flag with a separated argument.
-hardcode_libdir_separator=$lt_hardcode_libdir_separator_RC
-
-# Set to yes if using DIR/libNAME${shared_ext} during linking hardcodes DIR into the
-# resulting binary.
-hardcode_direct=$hardcode_direct_RC
-
-# Set to yes if using the -LDIR flag during linking hardcodes DIR into the
-# resulting binary.
-hardcode_minus_L=$hardcode_minus_L_RC
-
-# Set to yes if using SHLIBPATH_VAR=DIR during linking hardcodes DIR into
-# the resulting binary.
-hardcode_shlibpath_var=$hardcode_shlibpath_var_RC
-
-# Set to yes if building a shared library automatically hardcodes DIR into the library
-# and all subsequent libraries and executables linked against it.
-hardcode_automatic=$hardcode_automatic_RC
-
-# Variables whose values should be saved in libtool wrapper scripts and
-# restored at relink time.
-variables_saved_for_relink="$variables_saved_for_relink"
-
-# Whether libtool must link a program against all its dependency libraries.
-link_all_deplibs=$link_all_deplibs_RC
-
-# Compile-time system search path for libraries
-sys_lib_search_path_spec=$lt_sys_lib_search_path_spec
-
-# Run-time system search path for libraries
-sys_lib_dlsearch_path_spec=$lt_sys_lib_dlsearch_path_spec
-
-# Fix the shell variable \$srcfile for the compiler.
-fix_srcfile_path=$lt_fix_srcfile_path
-
-# Set to yes if exported symbols are required.
-always_export_symbols=$always_export_symbols_RC
-
-# The commands to list exported symbols.
-export_symbols_cmds=$lt_export_symbols_cmds_RC
-
-# The commands to extract the exported symbol list from a shared archive.
-extract_expsyms_cmds=$lt_extract_expsyms_cmds
-
-# Symbols that should not be listed in the preloaded symbols.
-exclude_expsyms=$lt_exclude_expsyms_RC
-
-# Symbols that must always be exported.
-include_expsyms=$lt_include_expsyms_RC
-
-# ### END LIBTOOL TAG CONFIG: $tagname
-
-__EOF__
-
-
-else
- # If there is no Makefile yet, we rely on a make rule to execute
- # `config.status --recheck' to rerun these tests and create the
- # libtool script then.
- ltmain_in=`echo $ltmain | sed -e 's/\.sh$/.in/'`
- if test -f "$ltmain_in"; then
- test -f Makefile && make "$ltmain"
- fi
-fi
-
-
-ac_ext=c
-ac_cpp='$CPP $CPPFLAGS'
-ac_compile='$CC -c $CFLAGS $CPPFLAGS conftest.$ac_ext >&5'
-ac_link='$CC -o conftest$ac_exeext $CFLAGS $CPPFLAGS $LDFLAGS conftest.$ac_ext $LIBS >&5'
-ac_compiler_gnu=$ac_cv_c_compiler_gnu
-
-CC="$lt_save_CC"
-
- ;;
-
- *)
- { { $as_echo "$as_me:$LINENO: error: Unsupported tag name: $tagname" >&5
-$as_echo "$as_me: error: Unsupported tag name: $tagname" >&2;}
- { (exit 1); exit 1; }; }
- ;;
- esac
-
- # Append the new tag name to the list of available tags.
- if test -n "$tagname" ; then
- available_tags="$available_tags $tagname"
- fi
- fi
- done
- IFS="$lt_save_ifs"
-
- # Now substitute the updated list of available tags.
- if eval "sed -e 's/^available_tags=.*\$/available_tags=\"$available_tags\"/' \"$ofile\" > \"${ofile}T\""; then
- mv "${ofile}T" "$ofile"
- chmod +x "$ofile"
- else
- rm -f "${ofile}T"
- { { $as_echo "$as_me:$LINENO: error: unable to update list of available tagged configurations." >&5
-$as_echo "$as_me: error: unable to update list of available tagged configurations." >&2;}
- { (exit 1); exit 1; }; }
- fi
-fi
-
-
-
-# This can be used to rebuild libtool when needed
-LIBTOOL_DEPS="$ac_aux_dir/ltmain.sh"
-
-# Always use our own libtool.
-LIBTOOL='$(SHELL) $(top_builddir)/libtool'
-
-# Prevent multiple expansion
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-###############################################################################
-# Checks for libraries.
-###############################################################################
-
-echo
-echo "Initializing gettext:"
-
-
- { $as_echo "$as_me:$LINENO: checking whether NLS is requested" >&5
-$as_echo_n "checking whether NLS is requested... " >&6; }
- # Check whether --enable-nls was given.
-if test "${enable_nls+set}" = set; then
- enableval=$enable_nls; USE_NLS=$enableval
-else
- USE_NLS=yes
-fi
-
- { $as_echo "$as_me:$LINENO: result: $USE_NLS" >&5
-$as_echo "$USE_NLS" >&6; }
-
-
-
-
-
-
-# Prepare PATH_SEPARATOR.
-# The user is always right.
-if test "${PATH_SEPARATOR+set}" != set; then
- echo "#! /bin/sh" >conf$$.sh
- echo "exit 0" >>conf$$.sh
- chmod +x conf$$.sh
- if (PATH="/nonexistent;."; conf$$.sh) >/dev/null 2>&1; then
- PATH_SEPARATOR=';'
- else
- PATH_SEPARATOR=:
- fi
- rm -f conf$$.sh
-fi
-
-# Find out how to test for executable files. Don't use a zero-byte file,
-# as systems may use methods other than mode bits to determine executability.
-cat >conf$$.file <<_ASEOF
-#! /bin/sh
-exit 0
-_ASEOF
-chmod +x conf$$.file
-if test -x conf$$.file >/dev/null 2>&1; then
- ac_executable_p="test -x"
-else
- ac_executable_p="test -f"
-fi
-rm -f conf$$.file
-
-# Extract the first word of "msgfmt", so it can be a program name with args.
-set dummy msgfmt; ac_word=$2
-{ $as_echo "$as_me:$LINENO: checking for $ac_word" >&5
-$as_echo_n "checking for $ac_word... " >&6; }
-if test "${ac_cv_path_MSGFMT+set}" = set; then
- $as_echo_n "(cached) " >&6
-else
- case "$MSGFMT" in
- [\\/]* | ?:[\\/]*)
- ac_cv_path_MSGFMT="$MSGFMT" # Let the user override the test with a path.
- ;;
- *)
- ac_save_IFS="$IFS"; IFS=$PATH_SEPARATOR
- for ac_dir in $PATH; do
- IFS="$ac_save_IFS"
- test -z "$ac_dir" && ac_dir=.
- for ac_exec_ext in '' $ac_executable_extensions; do
- if $ac_executable_p "$ac_dir/$ac_word$ac_exec_ext"; then
- echo "$as_me: trying $ac_dir/$ac_word..." >&5
- if $ac_dir/$ac_word --statistics /dev/null >&5 2>&1 &&
- (if $ac_dir/$ac_word --statistics /dev/null 2>&1 >/dev/null | grep usage >/dev/null; then exit 1; else exit 0; fi); then
- ac_cv_path_MSGFMT="$ac_dir/$ac_word$ac_exec_ext"
- break 2
- fi
- fi
- done
- done
- IFS="$ac_save_IFS"
- test -z "$ac_cv_path_MSGFMT" && ac_cv_path_MSGFMT=":"
- ;;
-esac
-fi
-MSGFMT="$ac_cv_path_MSGFMT"
-if test "$MSGFMT" != ":"; then
- { $as_echo "$as_me:$LINENO: result: $MSGFMT" >&5
-$as_echo "$MSGFMT" >&6; }
-else
- { $as_echo "$as_me:$LINENO: result: no" >&5
-$as_echo "no" >&6; }
-fi
-
- # Extract the first word of "gmsgfmt", so it can be a program name with args.
-set dummy gmsgfmt; ac_word=$2
-{ $as_echo "$as_me:$LINENO: checking for $ac_word" >&5
-$as_echo_n "checking for $ac_word... " >&6; }
-if test "${ac_cv_path_GMSGFMT+set}" = set; then
- $as_echo_n "(cached) " >&6
-else
- case $GMSGFMT in
- [\\/]* | ?:[\\/]*)
- ac_cv_path_GMSGFMT="$GMSGFMT" # Let the user override the test with a path.
- ;;
- *)
- as_save_IFS=$IFS; IFS=$PATH_SEPARATOR
-for as_dir in $PATH
-do
- IFS=$as_save_IFS
- test -z "$as_dir" && as_dir=.
- for ac_exec_ext in '' $ac_executable_extensions; do
- if { test -f "$as_dir/$ac_word$ac_exec_ext" && $as_test_x "$as_dir/$ac_word$ac_exec_ext"; }; then
- ac_cv_path_GMSGFMT="$as_dir/$ac_word$ac_exec_ext"
- $as_echo "$as_me:$LINENO: found $as_dir/$ac_word$ac_exec_ext" >&5
- break 2
- fi
-done
-done
-IFS=$as_save_IFS
-
- test -z "$ac_cv_path_GMSGFMT" && ac_cv_path_GMSGFMT="$MSGFMT"
- ;;
-esac
-fi
-GMSGFMT=$ac_cv_path_GMSGFMT
-if test -n "$GMSGFMT"; then
- { $as_echo "$as_me:$LINENO: result: $GMSGFMT" >&5
-$as_echo "$GMSGFMT" >&6; }
-else
- { $as_echo "$as_me:$LINENO: result: no" >&5
-$as_echo "no" >&6; }
-fi
-
-
-
- case `$MSGFMT --version | sed 1q | sed -e 's,^[^0-9]*,,'` in
- '' | 0.[0-9] | 0.[0-9].* | 0.1[0-4] | 0.1[0-4].*) MSGFMT_015=: ;;
- *) MSGFMT_015=$MSGFMT ;;
- esac
-
- case `$GMSGFMT --version | sed 1q | sed -e 's,^[^0-9]*,,'` in
- '' | 0.[0-9] | 0.[0-9].* | 0.1[0-4] | 0.1[0-4].*) GMSGFMT_015=: ;;
- *) GMSGFMT_015=$GMSGFMT ;;
- esac
-
-
-
-# Prepare PATH_SEPARATOR.
-# The user is always right.
-if test "${PATH_SEPARATOR+set}" != set; then
- echo "#! /bin/sh" >conf$$.sh
- echo "exit 0" >>conf$$.sh
- chmod +x conf$$.sh
- if (PATH="/nonexistent;."; conf$$.sh) >/dev/null 2>&1; then
- PATH_SEPARATOR=';'
- else
- PATH_SEPARATOR=:
- fi
- rm -f conf$$.sh
-fi
-
-# Find out how to test for executable files. Don't use a zero-byte file,
-# as systems may use methods other than mode bits to determine executability.
-cat >conf$$.file <<_ASEOF
-#! /bin/sh
-exit 0
-_ASEOF
-chmod +x conf$$.file
-if test -x conf$$.file >/dev/null 2>&1; then
- ac_executable_p="test -x"
-else
- ac_executable_p="test -f"
-fi
-rm -f conf$$.file
-
-# Extract the first word of "xgettext", so it can be a program name with args.
-set dummy xgettext; ac_word=$2
-{ $as_echo "$as_me:$LINENO: checking for $ac_word" >&5
-$as_echo_n "checking for $ac_word... " >&6; }
-if test "${ac_cv_path_XGETTEXT+set}" = set; then
- $as_echo_n "(cached) " >&6
-else
- case "$XGETTEXT" in
- [\\/]* | ?:[\\/]*)
- ac_cv_path_XGETTEXT="$XGETTEXT" # Let the user override the test with a path.
- ;;
- *)
- ac_save_IFS="$IFS"; IFS=$PATH_SEPARATOR
- for ac_dir in $PATH; do
- IFS="$ac_save_IFS"
- test -z "$ac_dir" && ac_dir=.
- for ac_exec_ext in '' $ac_executable_extensions; do
- if $ac_executable_p "$ac_dir/$ac_word$ac_exec_ext"; then
- echo "$as_me: trying $ac_dir/$ac_word..." >&5
- if $ac_dir/$ac_word --omit-header --copyright-holder= --msgid-bugs-address= /dev/null >&5 2>&1 &&
- (if $ac_dir/$ac_word --omit-header --copyright-holder= --msgid-bugs-address= /dev/null 2>&1 >/dev/null | grep usage >/dev/null; then exit 1; else exit 0; fi); then
- ac_cv_path_XGETTEXT="$ac_dir/$ac_word$ac_exec_ext"
- break 2
- fi
- fi
- done
- done
- IFS="$ac_save_IFS"
- test -z "$ac_cv_path_XGETTEXT" && ac_cv_path_XGETTEXT=":"
- ;;
-esac
-fi
-XGETTEXT="$ac_cv_path_XGETTEXT"
-if test "$XGETTEXT" != ":"; then
- { $as_echo "$as_me:$LINENO: result: $XGETTEXT" >&5
-$as_echo "$XGETTEXT" >&6; }
-else
- { $as_echo "$as_me:$LINENO: result: no" >&5
-$as_echo "no" >&6; }
-fi
-
- rm -f messages.po
-
- case `$XGETTEXT --version | sed 1q | sed -e 's,^[^0-9]*,,'` in
- '' | 0.[0-9] | 0.[0-9].* | 0.1[0-4] | 0.1[0-4].*) XGETTEXT_015=: ;;
- *) XGETTEXT_015=$XGETTEXT ;;
- esac
-
-
-
-# Prepare PATH_SEPARATOR.
-# The user is always right.
-if test "${PATH_SEPARATOR+set}" != set; then
- echo "#! /bin/sh" >conf$$.sh
- echo "exit 0" >>conf$$.sh
- chmod +x conf$$.sh
- if (PATH="/nonexistent;."; conf$$.sh) >/dev/null 2>&1; then
- PATH_SEPARATOR=';'
- else
- PATH_SEPARATOR=:
- fi
- rm -f conf$$.sh
-fi
-
-# Find out how to test for executable files. Don't use a zero-byte file,
-# as systems may use methods other than mode bits to determine executability.
-cat >conf$$.file <<_ASEOF
-#! /bin/sh
-exit 0
-_ASEOF
-chmod +x conf$$.file
-if test -x conf$$.file >/dev/null 2>&1; then
- ac_executable_p="test -x"
-else
- ac_executable_p="test -f"
-fi
-rm -f conf$$.file
-
-# Extract the first word of "msgmerge", so it can be a program name with args.
-set dummy msgmerge; ac_word=$2
-{ $as_echo "$as_me:$LINENO: checking for $ac_word" >&5
-$as_echo_n "checking for $ac_word... " >&6; }
-if test "${ac_cv_path_MSGMERGE+set}" = set; then
- $as_echo_n "(cached) " >&6
-else
- case "$MSGMERGE" in
- [\\/]* | ?:[\\/]*)
- ac_cv_path_MSGMERGE="$MSGMERGE" # Let the user override the test with a path.
- ;;
- *)
- ac_save_IFS="$IFS"; IFS=$PATH_SEPARATOR
- for ac_dir in $PATH; do
- IFS="$ac_save_IFS"
- test -z "$ac_dir" && ac_dir=.
- for ac_exec_ext in '' $ac_executable_extensions; do
- if $ac_executable_p "$ac_dir/$ac_word$ac_exec_ext"; then
- echo "$as_me: trying $ac_dir/$ac_word..." >&5
- if $ac_dir/$ac_word --update -q /dev/null /dev/null >&5 2>&1; then
- ac_cv_path_MSGMERGE="$ac_dir/$ac_word$ac_exec_ext"
- break 2
- fi
- fi
- done
- done
- IFS="$ac_save_IFS"
- test -z "$ac_cv_path_MSGMERGE" && ac_cv_path_MSGMERGE=":"
- ;;
-esac
-fi
-MSGMERGE="$ac_cv_path_MSGMERGE"
-if test "$MSGMERGE" != ":"; then
- { $as_echo "$as_me:$LINENO: result: $MSGMERGE" >&5
-$as_echo "$MSGMERGE" >&6; }
-else
- { $as_echo "$as_me:$LINENO: result: no" >&5
-$as_echo "no" >&6; }
-fi
-
-
- test -n "$localedir" || localedir='${datadir}/locale'
-
-
- ac_config_commands="$ac_config_commands po-directories"
-
-
-
- if test "X$prefix" = "XNONE"; then
- acl_final_prefix="$ac_default_prefix"
- else
- acl_final_prefix="$prefix"
- fi
- if test "X$exec_prefix" = "XNONE"; then
- acl_final_exec_prefix='${prefix}'
- else
- acl_final_exec_prefix="$exec_prefix"
- fi
- acl_save_prefix="$prefix"
- prefix="$acl_final_prefix"
- eval acl_final_exec_prefix=\"$acl_final_exec_prefix\"
- prefix="$acl_save_prefix"
-
-
-# Check whether --with-gnu-ld was given.
-if test "${with_gnu_ld+set}" = set; then
- withval=$with_gnu_ld; test "$withval" = no || with_gnu_ld=yes
-else
- with_gnu_ld=no
-fi
-
-# Prepare PATH_SEPARATOR.
-# The user is always right.
-if test "${PATH_SEPARATOR+set}" != set; then
- echo "#! /bin/sh" >conf$$.sh
- echo "exit 0" >>conf$$.sh
- chmod +x conf$$.sh
- if (PATH="/nonexistent;."; conf$$.sh) >/dev/null 2>&1; then
- PATH_SEPARATOR=';'
- else
- PATH_SEPARATOR=:
- fi
- rm -f conf$$.sh
-fi
-ac_prog=ld
-if test "$GCC" = yes; then
- # Check if gcc -print-prog-name=ld gives a path.
- { $as_echo "$as_me:$LINENO: checking for ld used by GCC" >&5
-$as_echo_n "checking for ld used by GCC... " >&6; }
- case $host in
- *-*-mingw*)
- # gcc leaves a trailing carriage return which upsets mingw
- ac_prog=`($CC -print-prog-name=ld) 2>&5 | tr -d '\015'` ;;
- *)
- ac_prog=`($CC -print-prog-name=ld) 2>&5` ;;
- esac
- case $ac_prog in
- # Accept absolute paths.
- [\\/]* | [A-Za-z]:[\\/]*)
- re_direlt='/[^/][^/]*/\.\./'
- # Canonicalize the path of ld
- ac_prog=`echo $ac_prog| sed 's%\\\\%/%g'`
- while echo $ac_prog | grep "$re_direlt" > /dev/null 2>&1; do
- ac_prog=`echo $ac_prog| sed "s%$re_direlt%/%"`
- done
- test -z "$LD" && LD="$ac_prog"
- ;;
- "")
- # If it fails, then pretend we aren't using GCC.
- ac_prog=ld
- ;;
- *)
- # If it is relative, then search for the first ld in PATH.
- with_gnu_ld=unknown
- ;;
- esac
-elif test "$with_gnu_ld" = yes; then
- { $as_echo "$as_me:$LINENO: checking for GNU ld" >&5
-$as_echo_n "checking for GNU ld... " >&6; }
-else
- { $as_echo "$as_me:$LINENO: checking for non-GNU ld" >&5
-$as_echo_n "checking for non-GNU ld... " >&6; }
-fi
-if test "${acl_cv_path_LD+set}" = set; then
- $as_echo_n "(cached) " >&6
-else
- if test -z "$LD"; then
- IFS="${IFS= }"; ac_save_ifs="$IFS"; IFS="${IFS}${PATH_SEPARATOR-:}"
- for ac_dir in $PATH; do
- test -z "$ac_dir" && ac_dir=.
- if test -f "$ac_dir/$ac_prog" || test -f "$ac_dir/$ac_prog$ac_exeext"; then
- acl_cv_path_LD="$ac_dir/$ac_prog"
- # Check to see if the program is GNU ld. I'd rather use --version,
- # but apparently some GNU ld's only accept -v.
- # Break only if it was the GNU/non-GNU ld that we prefer.
- case `"$acl_cv_path_LD" -v 2>&1 < /dev/null` in
- *GNU* | *'with BFD'*)
- test "$with_gnu_ld" != no && break ;;
- *)
- test "$with_gnu_ld" != yes && break ;;
- esac
- fi
- done
- IFS="$ac_save_ifs"
-else
- acl_cv_path_LD="$LD" # Let the user override the test with a path.
-fi
-fi
-
-LD="$acl_cv_path_LD"
-if test -n "$LD"; then
- { $as_echo "$as_me:$LINENO: result: $LD" >&5
-$as_echo "$LD" >&6; }
-else
- { $as_echo "$as_me:$LINENO: result: no" >&5
-$as_echo "no" >&6; }
-fi
-test -z "$LD" && { { $as_echo "$as_me:$LINENO: error: no acceptable ld found in \$PATH" >&5
-$as_echo "$as_me: error: no acceptable ld found in \$PATH" >&2;}
- { (exit 1); exit 1; }; }
-{ $as_echo "$as_me:$LINENO: checking if the linker ($LD) is GNU ld" >&5
-$as_echo_n "checking if the linker ($LD) is GNU ld... " >&6; }
-if test "${acl_cv_prog_gnu_ld+set}" = set; then
- $as_echo_n "(cached) " >&6
-else
- # I'd rather use --version here, but apparently some GNU ld's only accept -v.
-case `$LD -v 2>&1 </dev/null` in
-*GNU* | *'with BFD'*)
- acl_cv_prog_gnu_ld=yes ;;
-*)
- acl_cv_prog_gnu_ld=no ;;
-esac
-fi
-{ $as_echo "$as_me:$LINENO: result: $acl_cv_prog_gnu_ld" >&5
-$as_echo "$acl_cv_prog_gnu_ld" >&6; }
-with_gnu_ld=$acl_cv_prog_gnu_ld
-
-
-
-
- { $as_echo "$as_me:$LINENO: checking for shared library run path origin" >&5
-$as_echo_n "checking for shared library run path origin... " >&6; }
-if test "${acl_cv_rpath+set}" = set; then
- $as_echo_n "(cached) " >&6
-else
-
- CC="$CC" GCC="$GCC" LDFLAGS="$LDFLAGS" LD="$LD" with_gnu_ld="$with_gnu_ld" \
- ${CONFIG_SHELL-/bin/sh} "$ac_aux_dir/config.rpath" "$host" > conftest.sh
- . ./conftest.sh
- rm -f ./conftest.sh
- acl_cv_rpath=done
-
-fi
-{ $as_echo "$as_me:$LINENO: result: $acl_cv_rpath" >&5
-$as_echo "$acl_cv_rpath" >&6; }
- wl="$acl_cv_wl"
- libext="$acl_cv_libext"
- shlibext="$acl_cv_shlibext"
- hardcode_libdir_flag_spec="$acl_cv_hardcode_libdir_flag_spec"
- hardcode_libdir_separator="$acl_cv_hardcode_libdir_separator"
- hardcode_direct="$acl_cv_hardcode_direct"
- hardcode_minus_L="$acl_cv_hardcode_minus_L"
- # Check whether --enable-rpath was given.
-if test "${enable_rpath+set}" = set; then
- enableval=$enable_rpath; :
-else
- enable_rpath=yes
-fi
-
-
-
- acl_libdirstem=lib
- searchpath=`(LC_ALL=C $CC -print-search-dirs) 2>/dev/null | sed -n -e 's,^libraries: ,,p' | sed -e 's,^=,,'`
- if test -n "$searchpath"; then
- acl_save_IFS="${IFS= }"; IFS=":"
- for searchdir in $searchpath; do
- if test -d "$searchdir"; then
- case "$searchdir" in
- */lib64/ | */lib64 ) acl_libdirstem=lib64 ;;
- *) searchdir=`cd "$searchdir" && pwd`
- case "$searchdir" in
- */lib64 ) acl_libdirstem=lib64 ;;
- esac ;;
- esac
- fi
- done
- IFS="$acl_save_IFS"
- fi
-
-
-
-
-
-
-
-
- use_additional=yes
-
- acl_save_prefix="$prefix"
- prefix="$acl_final_prefix"
- acl_save_exec_prefix="$exec_prefix"
- exec_prefix="$acl_final_exec_prefix"
-
- eval additional_includedir=\"$includedir\"
- eval additional_libdir=\"$libdir\"
-
- exec_prefix="$acl_save_exec_prefix"
- prefix="$acl_save_prefix"
-
-
-# Check whether --with-libiconv-prefix was given.
-if test "${with_libiconv_prefix+set}" = set; then
- withval=$with_libiconv_prefix;
- if test "X$withval" = "Xno"; then
- use_additional=no
- else
- if test "X$withval" = "X"; then
-
- acl_save_prefix="$prefix"
- prefix="$acl_final_prefix"
- acl_save_exec_prefix="$exec_prefix"
- exec_prefix="$acl_final_exec_prefix"
-
- eval additional_includedir=\"$includedir\"
- eval additional_libdir=\"$libdir\"
-
- exec_prefix="$acl_save_exec_prefix"
- prefix="$acl_save_prefix"
-
- else
- additional_includedir="$withval/include"
- additional_libdir="$withval/$acl_libdirstem"
- fi
- fi
-
-fi
-
- LIBICONV=
- LTLIBICONV=
- INCICONV=
- rpathdirs=
- ltrpathdirs=
- names_already_handled=
- names_next_round='iconv '
- while test -n "$names_next_round"; do
- names_this_round="$names_next_round"
- names_next_round=
- for name in $names_this_round; do
- already_handled=
- for n in $names_already_handled; do
- if test "$n" = "$name"; then
- already_handled=yes
- break
- fi
- done
- if test -z "$already_handled"; then
- names_already_handled="$names_already_handled $name"
- uppername=`echo "$name" | sed -e 'y|abcdefghijklmnopqrstuvwxyz./-|ABCDEFGHIJKLMNOPQRSTUVWXYZ___|'`
- eval value=\"\$HAVE_LIB$uppername\"
- if test -n "$value"; then
- if test "$value" = yes; then
- eval value=\"\$LIB$uppername\"
- test -z "$value" || LIBICONV="${LIBICONV}${LIBICONV:+ }$value"
- eval value=\"\$LTLIB$uppername\"
- test -z "$value" || LTLIBICONV="${LTLIBICONV}${LTLIBICONV:+ }$value"
- else
- :
- fi
- else
- found_dir=
- found_la=
- found_so=
- found_a=
- if test $use_additional = yes; then
- if test -n "$shlibext" \
- && { test -f "$additional_libdir/lib$name.$shlibext" \
- || { test "$shlibext" = dll \
- && test -f "$additional_libdir/lib$name.dll.a"; }; }; then
- found_dir="$additional_libdir"
- if test -f "$additional_libdir/lib$name.$shlibext"; then
- found_so="$additional_libdir/lib$name.$shlibext"
- else
- found_so="$additional_libdir/lib$name.dll.a"
- fi
- if test -f "$additional_libdir/lib$name.la"; then
- found_la="$additional_libdir/lib$name.la"
- fi
- else
- if test -f "$additional_libdir/lib$name.$libext"; then
- found_dir="$additional_libdir"
- found_a="$additional_libdir/lib$name.$libext"
- if test -f "$additional_libdir/lib$name.la"; then
- found_la="$additional_libdir/lib$name.la"
- fi
- fi
- fi
- fi
- if test "X$found_dir" = "X"; then
- for x in $LDFLAGS $LTLIBICONV; do
-
- acl_save_prefix="$prefix"
- prefix="$acl_final_prefix"
- acl_save_exec_prefix="$exec_prefix"
- exec_prefix="$acl_final_exec_prefix"
- eval x=\"$x\"
- exec_prefix="$acl_save_exec_prefix"
- prefix="$acl_save_prefix"
-
- case "$x" in
- -L*)
- dir=`echo "X$x" | sed -e 's/^X-L//'`
- if test -n "$shlibext" \
- && { test -f "$dir/lib$name.$shlibext" \
- || { test "$shlibext" = dll \
- && test -f "$dir/lib$name.dll.a"; }; }; then
- found_dir="$dir"
- if test -f "$dir/lib$name.$shlibext"; then
- found_so="$dir/lib$name.$shlibext"
- else
- found_so="$dir/lib$name.dll.a"
- fi
- if test -f "$dir/lib$name.la"; then
- found_la="$dir/lib$name.la"
- fi
- else
- if test -f "$dir/lib$name.$libext"; then
- found_dir="$dir"
- found_a="$dir/lib$name.$libext"
- if test -f "$dir/lib$name.la"; then
- found_la="$dir/lib$name.la"
- fi
- fi
- fi
- ;;
- esac
- if test "X$found_dir" != "X"; then
- break
- fi
- done
- fi
- if test "X$found_dir" != "X"; then
- LTLIBICONV="${LTLIBICONV}${LTLIBICONV:+ }-L$found_dir -l$name"
- if test "X$found_so" != "X"; then
- if test "$enable_rpath" = no || test "X$found_dir" = "X/usr/$acl_libdirstem"; then
- LIBICONV="${LIBICONV}${LIBICONV:+ }$found_so"
- else
- haveit=
- for x in $ltrpathdirs; do
- if test "X$x" = "X$found_dir"; then
- haveit=yes
- break
- fi
- done
- if test -z "$haveit"; then
- ltrpathdirs="$ltrpathdirs $found_dir"
- fi
- if test "$hardcode_direct" = yes; then
- LIBICONV="${LIBICONV}${LIBICONV:+ }$found_so"
- else
- if test -n "$hardcode_libdir_flag_spec" && test "$hardcode_minus_L" = no; then
- LIBICONV="${LIBICONV}${LIBICONV:+ }$found_so"
- haveit=
- for x in $rpathdirs; do
- if test "X$x" = "X$found_dir"; then
- haveit=yes
- break
- fi
- done
- if test -z "$haveit"; then
- rpathdirs="$rpathdirs $found_dir"
- fi
- else
- haveit=
- for x in $LDFLAGS $LIBICONV; do
-
- acl_save_prefix="$prefix"
- prefix="$acl_final_prefix"
- acl_save_exec_prefix="$exec_prefix"
- exec_prefix="$acl_final_exec_prefix"
- eval x=\"$x\"
- exec_prefix="$acl_save_exec_prefix"
- prefix="$acl_save_prefix"
-
- if test "X$x" = "X-L$found_dir"; then
- haveit=yes
- break
- fi
- done
- if test -z "$haveit"; then
- LIBICONV="${LIBICONV}${LIBICONV:+ }-L$found_dir"
- fi
- if test "$hardcode_minus_L" != no; then
- LIBICONV="${LIBICONV}${LIBICONV:+ }$found_so"
- else
- LIBICONV="${LIBICONV}${LIBICONV:+ }-l$name"
- fi
- fi
- fi
- fi
- else
- if test "X$found_a" != "X"; then
- LIBICONV="${LIBICONV}${LIBICONV:+ }$found_a"
- else
- LIBICONV="${LIBICONV}${LIBICONV:+ }-L$found_dir -l$name"
- fi
- fi
- additional_includedir=
- case "$found_dir" in
- */$acl_libdirstem | */$acl_libdirstem/)
- basedir=`echo "X$found_dir" | sed -e 's,^X,,' -e "s,/$acl_libdirstem/"'*$,,'`
- additional_includedir="$basedir/include"
- ;;
- esac
- if test "X$additional_includedir" != "X"; then
- if test "X$additional_includedir" != "X/usr/include"; then
- haveit=
- if test "X$additional_includedir" = "X/usr/local/include"; then
- if test -n "$GCC"; then
- case $host_os in
- linux* | gnu* | k*bsd*-gnu) haveit=yes;;
- esac
- fi
- fi
- if test -z "$haveit"; then
- for x in $CPPFLAGS $INCICONV; do
-
- acl_save_prefix="$prefix"
- prefix="$acl_final_prefix"
- acl_save_exec_prefix="$exec_prefix"
- exec_prefix="$acl_final_exec_prefix"
- eval x=\"$x\"
- exec_prefix="$acl_save_exec_prefix"
- prefix="$acl_save_prefix"
-
- if test "X$x" = "X-I$additional_includedir"; then
- haveit=yes
- break
- fi
- done
- if test -z "$haveit"; then
- if test -d "$additional_includedir"; then
- INCICONV="${INCICONV}${INCICONV:+ }-I$additional_includedir"
- fi
- fi
- fi
- fi
- fi
- if test -n "$found_la"; then
- save_libdir="$libdir"
- case "$found_la" in
- */* | *\\*) . "$found_la" ;;
- *) . "./$found_la" ;;
- esac
- libdir="$save_libdir"
- for dep in $dependency_libs; do
- case "$dep" in
- -L*)
- additional_libdir=`echo "X$dep" | sed -e 's/^X-L//'`
- if test "X$additional_libdir" != "X/usr/$acl_libdirstem"; then
- haveit=
- if test "X$additional_libdir" = "X/usr/local/$acl_libdirstem"; then
- if test -n "$GCC"; then
- case $host_os in
- linux* | gnu* | k*bsd*-gnu) haveit=yes;;
- esac
- fi
- fi
- if test -z "$haveit"; then
- haveit=
- for x in $LDFLAGS $LIBICONV; do
-
- acl_save_prefix="$prefix"
- prefix="$acl_final_prefix"
- acl_save_exec_prefix="$exec_prefix"
- exec_prefix="$acl_final_exec_prefix"
- eval x=\"$x\"
- exec_prefix="$acl_save_exec_prefix"
- prefix="$acl_save_prefix"
-
- if test "X$x" = "X-L$additional_libdir"; then
- haveit=yes
- break
- fi
- done
- if test -z "$haveit"; then
- if test -d "$additional_libdir"; then
- LIBICONV="${LIBICONV}${LIBICONV:+ }-L$additional_libdir"
- fi
- fi
- haveit=
- for x in $LDFLAGS $LTLIBICONV; do
-
- acl_save_prefix="$prefix"
- prefix="$acl_final_prefix"
- acl_save_exec_prefix="$exec_prefix"
- exec_prefix="$acl_final_exec_prefix"
- eval x=\"$x\"
- exec_prefix="$acl_save_exec_prefix"
- prefix="$acl_save_prefix"
-
- if test "X$x" = "X-L$additional_libdir"; then
- haveit=yes
- break
- fi
- done
- if test -z "$haveit"; then
- if test -d "$additional_libdir"; then
- LTLIBICONV="${LTLIBICONV}${LTLIBICONV:+ }-L$additional_libdir"
- fi
- fi
- fi
- fi
- ;;
- -R*)
- dir=`echo "X$dep" | sed -e 's/^X-R//'`
- if test "$enable_rpath" != no; then
- haveit=
- for x in $rpathdirs; do
- if test "X$x" = "X$dir"; then
- haveit=yes
- break
- fi
- done
- if test -z "$haveit"; then
- rpathdirs="$rpathdirs $dir"
- fi
- haveit=
- for x in $ltrpathdirs; do
- if test "X$x" = "X$dir"; then
- haveit=yes
- break
- fi
- done
- if test -z "$haveit"; then
- ltrpathdirs="$ltrpathdirs $dir"
- fi
- fi
- ;;
- -l*)
- names_next_round="$names_next_round "`echo "X$dep" | sed -e 's/^X-l//'`
- ;;
- *.la)
- names_next_round="$names_next_round "`echo "X$dep" | sed -e 's,^X.*/,,' -e 's,^lib,,' -e 's,\.la$,,'`
- ;;
- *)
- LIBICONV="${LIBICONV}${LIBICONV:+ }$dep"
- LTLIBICONV="${LTLIBICONV}${LTLIBICONV:+ }$dep"
- ;;
- esac
- done
- fi
- else
- LIBICONV="${LIBICONV}${LIBICONV:+ }-l$name"
- LTLIBICONV="${LTLIBICONV}${LTLIBICONV:+ }-l$name"
- fi
- fi
- fi
- done
- done
- if test "X$rpathdirs" != "X"; then
- if test -n "$hardcode_libdir_separator"; then
- alldirs=
- for found_dir in $rpathdirs; do
- alldirs="${alldirs}${alldirs:+$hardcode_libdir_separator}$found_dir"
- done
- acl_save_libdir="$libdir"
- libdir="$alldirs"
- eval flag=\"$hardcode_libdir_flag_spec\"
- libdir="$acl_save_libdir"
- LIBICONV="${LIBICONV}${LIBICONV:+ }$flag"
- else
- for found_dir in $rpathdirs; do
- acl_save_libdir="$libdir"
- libdir="$found_dir"
- eval flag=\"$hardcode_libdir_flag_spec\"
- libdir="$acl_save_libdir"
- LIBICONV="${LIBICONV}${LIBICONV:+ }$flag"
- done
- fi
- fi
- if test "X$ltrpathdirs" != "X"; then
- for found_dir in $ltrpathdirs; do
- LTLIBICONV="${LTLIBICONV}${LTLIBICONV:+ }-R$found_dir"
- done
- fi
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
- { $as_echo "$as_me:$LINENO: checking for CFPreferencesCopyAppValue" >&5
-$as_echo_n "checking for CFPreferencesCopyAppValue... " >&6; }
-if test "${gt_cv_func_CFPreferencesCopyAppValue+set}" = set; then
- $as_echo_n "(cached) " >&6
-else
- gt_save_LIBS="$LIBS"
- LIBS="$LIBS -Wl,-framework -Wl,CoreFoundation"
- cat >conftest.$ac_ext <<_ACEOF
-/* confdefs.h. */
-_ACEOF
-cat confdefs.h >>conftest.$ac_ext
-cat >>conftest.$ac_ext <<_ACEOF
-/* end confdefs.h. */
-#include <CoreFoundation/CFPreferences.h>
-int
-main ()
-{
-CFPreferencesCopyAppValue(NULL, NULL)
- ;
- return 0;
-}
-_ACEOF
-rm -f conftest.$ac_objext conftest$ac_exeext
-if { (ac_try="$ac_link"
-case "(($ac_try" in
- *\"* | *\`* | *\\*) ac_try_echo=\$ac_try;;
- *) ac_try_echo=$ac_try;;
-esac
-eval ac_try_echo="\"\$as_me:$LINENO: $ac_try_echo\""
-$as_echo "$ac_try_echo") >&5
- (eval "$ac_link") 2>conftest.er1
- ac_status=$?
- grep -v '^ *+' conftest.er1 >conftest.err
- rm -f conftest.er1
- cat conftest.err >&5
- $as_echo "$as_me:$LINENO: \$? = $ac_status" >&5
- (exit $ac_status); } && {
- test -z "$ac_c_werror_flag" ||
- test ! -s conftest.err
- } && test -s conftest$ac_exeext && {
- test "$cross_compiling" = yes ||
- $as_test_x conftest$ac_exeext
- }; then
- gt_cv_func_CFPreferencesCopyAppValue=yes
-else
- $as_echo "$as_me: failed program was:" >&5
-sed 's/^/| /' conftest.$ac_ext >&5
-
- gt_cv_func_CFPreferencesCopyAppValue=no
-fi
-
-rm -rf conftest.dSYM
-rm -f core conftest.err conftest.$ac_objext conftest_ipa8_conftest.oo \
- conftest$ac_exeext conftest.$ac_ext
- LIBS="$gt_save_LIBS"
-fi
-{ $as_echo "$as_me:$LINENO: result: $gt_cv_func_CFPreferencesCopyAppValue" >&5
-$as_echo "$gt_cv_func_CFPreferencesCopyAppValue" >&6; }
- if test $gt_cv_func_CFPreferencesCopyAppValue = yes; then
-
-cat >>confdefs.h <<\_ACEOF
-#define HAVE_CFPREFERENCESCOPYAPPVALUE 1
-_ACEOF
-
- fi
- { $as_echo "$as_me:$LINENO: checking for CFLocaleCopyCurrent" >&5
-$as_echo_n "checking for CFLocaleCopyCurrent... " >&6; }
-if test "${gt_cv_func_CFLocaleCopyCurrent+set}" = set; then
- $as_echo_n "(cached) " >&6
-else
- gt_save_LIBS="$LIBS"
- LIBS="$LIBS -Wl,-framework -Wl,CoreFoundation"
- cat >conftest.$ac_ext <<_ACEOF
-/* confdefs.h. */
-_ACEOF
-cat confdefs.h >>conftest.$ac_ext
-cat >>conftest.$ac_ext <<_ACEOF
-/* end confdefs.h. */
-#include <CoreFoundation/CFLocale.h>
-int
-main ()
-{
-CFLocaleCopyCurrent();
- ;
- return 0;
-}
-_ACEOF
-rm -f conftest.$ac_objext conftest$ac_exeext
-if { (ac_try="$ac_link"
-case "(($ac_try" in
- *\"* | *\`* | *\\*) ac_try_echo=\$ac_try;;
- *) ac_try_echo=$ac_try;;
-esac
-eval ac_try_echo="\"\$as_me:$LINENO: $ac_try_echo\""
-$as_echo "$ac_try_echo") >&5
- (eval "$ac_link") 2>conftest.er1
- ac_status=$?
- grep -v '^ *+' conftest.er1 >conftest.err
- rm -f conftest.er1
- cat conftest.err >&5
- $as_echo "$as_me:$LINENO: \$? = $ac_status" >&5
- (exit $ac_status); } && {
- test -z "$ac_c_werror_flag" ||
- test ! -s conftest.err
- } && test -s conftest$ac_exeext && {
- test "$cross_compiling" = yes ||
- $as_test_x conftest$ac_exeext
- }; then
- gt_cv_func_CFLocaleCopyCurrent=yes
-else
- $as_echo "$as_me: failed program was:" >&5
-sed 's/^/| /' conftest.$ac_ext >&5
-
- gt_cv_func_CFLocaleCopyCurrent=no
-fi
-
-rm -rf conftest.dSYM
-rm -f core conftest.err conftest.$ac_objext conftest_ipa8_conftest.oo \
- conftest$ac_exeext conftest.$ac_ext
- LIBS="$gt_save_LIBS"
-fi
-{ $as_echo "$as_me:$LINENO: result: $gt_cv_func_CFLocaleCopyCurrent" >&5
-$as_echo "$gt_cv_func_CFLocaleCopyCurrent" >&6; }
- if test $gt_cv_func_CFLocaleCopyCurrent = yes; then
-
-cat >>confdefs.h <<\_ACEOF
-#define HAVE_CFLOCALECOPYCURRENT 1
-_ACEOF
-
- fi
- INTL_MACOSX_LIBS=
- if test $gt_cv_func_CFPreferencesCopyAppValue = yes || test $gt_cv_func_CFLocaleCopyCurrent = yes; then
- INTL_MACOSX_LIBS="-Wl,-framework -Wl,CoreFoundation"
- fi
-
-
-
-
-
-
- LIBINTL=
- LTLIBINTL=
- POSUB=
-
- case " $gt_needs " in
- *" need-formatstring-macros "*) gt_api_version=3 ;;
- *" need-ngettext "*) gt_api_version=2 ;;
- *) gt_api_version=1 ;;
- esac
- gt_func_gnugettext_libc="gt_cv_func_gnugettext${gt_api_version}_libc"
- gt_func_gnugettext_libintl="gt_cv_func_gnugettext${gt_api_version}_libintl"
-
- if test "$USE_NLS" = "yes"; then
- gt_use_preinstalled_gnugettext=no
-
-
- if test $gt_api_version -ge 3; then
- gt_revision_test_code='
-#ifndef __GNU_GETTEXT_SUPPORTED_REVISION
-#define __GNU_GETTEXT_SUPPORTED_REVISION(major) ((major) == 0 ? 0 : -1)
-#endif
-typedef int array [2 * (__GNU_GETTEXT_SUPPORTED_REVISION(0) >= 1) - 1];
-'
- else
- gt_revision_test_code=
- fi
- if test $gt_api_version -ge 2; then
- gt_expression_test_code=' + * ngettext ("", "", 0)'
- else
- gt_expression_test_code=
- fi
-
- { $as_echo "$as_me:$LINENO: checking for GNU gettext in libc" >&5
-$as_echo_n "checking for GNU gettext in libc... " >&6; }
-if { as_var=$gt_func_gnugettext_libc; eval "test \"\${$as_var+set}\" = set"; }; then
- $as_echo_n "(cached) " >&6
-else
- cat >conftest.$ac_ext <<_ACEOF
-/* confdefs.h. */
-_ACEOF
-cat confdefs.h >>conftest.$ac_ext
-cat >>conftest.$ac_ext <<_ACEOF
-/* end confdefs.h. */
-#include <libintl.h>
-$gt_revision_test_code
-extern int _nl_msg_cat_cntr;
-extern int *_nl_domain_bindings;
-int
-main ()
-{
-bindtextdomain ("", "");
-return * gettext ("")$gt_expression_test_code + _nl_msg_cat_cntr + *_nl_domain_bindings
- ;
- return 0;
-}
-_ACEOF
-rm -f conftest.$ac_objext conftest$ac_exeext
-if { (ac_try="$ac_link"
-case "(($ac_try" in
- *\"* | *\`* | *\\*) ac_try_echo=\$ac_try;;
- *) ac_try_echo=$ac_try;;
-esac
-eval ac_try_echo="\"\$as_me:$LINENO: $ac_try_echo\""
-$as_echo "$ac_try_echo") >&5
- (eval "$ac_link") 2>conftest.er1
- ac_status=$?
- grep -v '^ *+' conftest.er1 >conftest.err
- rm -f conftest.er1
- cat conftest.err >&5
- $as_echo "$as_me:$LINENO: \$? = $ac_status" >&5
- (exit $ac_status); } && {
- test -z "$ac_c_werror_flag" ||
- test ! -s conftest.err
- } && test -s conftest$ac_exeext && {
- test "$cross_compiling" = yes ||
- $as_test_x conftest$ac_exeext
- }; then
- eval "$gt_func_gnugettext_libc=yes"
-else
- $as_echo "$as_me: failed program was:" >&5
-sed 's/^/| /' conftest.$ac_ext >&5
-
- eval "$gt_func_gnugettext_libc=no"
-fi
-
-rm -rf conftest.dSYM
-rm -f core conftest.err conftest.$ac_objext conftest_ipa8_conftest.oo \
- conftest$ac_exeext conftest.$ac_ext
-fi
-ac_res=`eval 'as_val=${'$gt_func_gnugettext_libc'}
- $as_echo "$as_val"'`
- { $as_echo "$as_me:$LINENO: result: $ac_res" >&5
-$as_echo "$ac_res" >&6; }
-
- if { eval "gt_val=\$$gt_func_gnugettext_libc"; test "$gt_val" != "yes"; }; then
-
-
-
-
-
- am_save_CPPFLAGS="$CPPFLAGS"
-
- for element in $INCICONV; do
- haveit=
- for x in $CPPFLAGS; do
-
- acl_save_prefix="$prefix"
- prefix="$acl_final_prefix"
- acl_save_exec_prefix="$exec_prefix"
- exec_prefix="$acl_final_exec_prefix"
- eval x=\"$x\"
- exec_prefix="$acl_save_exec_prefix"
- prefix="$acl_save_prefix"
-
- if test "X$x" = "X$element"; then
- haveit=yes
- break
- fi
- done
- if test -z "$haveit"; then
- CPPFLAGS="${CPPFLAGS}${CPPFLAGS:+ }$element"
- fi
- done
-
-
- { $as_echo "$as_me:$LINENO: checking for iconv" >&5
-$as_echo_n "checking for iconv... " >&6; }
-if test "${am_cv_func_iconv+set}" = set; then
- $as_echo_n "(cached) " >&6
-else
-
- am_cv_func_iconv="no, consider installing GNU libiconv"
- am_cv_lib_iconv=no
- cat >conftest.$ac_ext <<_ACEOF
-/* confdefs.h. */
-_ACEOF
-cat confdefs.h >>conftest.$ac_ext
-cat >>conftest.$ac_ext <<_ACEOF
-/* end confdefs.h. */
-#include <stdlib.h>
-#include <iconv.h>
-int
-main ()
-{
-iconv_t cd = iconv_open("","");
- iconv(cd,NULL,NULL,NULL,NULL);
- iconv_close(cd);
- ;
- return 0;
-}
-_ACEOF
-rm -f conftest.$ac_objext conftest$ac_exeext
-if { (ac_try="$ac_link"
-case "(($ac_try" in
- *\"* | *\`* | *\\*) ac_try_echo=\$ac_try;;
- *) ac_try_echo=$ac_try;;
-esac
-eval ac_try_echo="\"\$as_me:$LINENO: $ac_try_echo\""
-$as_echo "$ac_try_echo") >&5
- (eval "$ac_link") 2>conftest.er1
- ac_status=$?
- grep -v '^ *+' conftest.er1 >conftest.err
- rm -f conftest.er1
- cat conftest.err >&5
- $as_echo "$as_me:$LINENO: \$? = $ac_status" >&5
- (exit $ac_status); } && {
- test -z "$ac_c_werror_flag" ||
- test ! -s conftest.err
- } && test -s conftest$ac_exeext && {
- test "$cross_compiling" = yes ||
- $as_test_x conftest$ac_exeext
- }; then
- am_cv_func_iconv=yes
-else
- $as_echo "$as_me: failed program was:" >&5
-sed 's/^/| /' conftest.$ac_ext >&5
-
-
-fi
-
-rm -rf conftest.dSYM
-rm -f core conftest.err conftest.$ac_objext conftest_ipa8_conftest.oo \
- conftest$ac_exeext conftest.$ac_ext
- if test "$am_cv_func_iconv" != yes; then
- am_save_LIBS="$LIBS"
- LIBS="$LIBS $LIBICONV"
- cat >conftest.$ac_ext <<_ACEOF
-/* confdefs.h. */
-_ACEOF
-cat confdefs.h >>conftest.$ac_ext
-cat >>conftest.$ac_ext <<_ACEOF
-/* end confdefs.h. */
-#include <stdlib.h>
-#include <iconv.h>
-int
-main ()
-{
-iconv_t cd = iconv_open("","");
- iconv(cd,NULL,NULL,NULL,NULL);
- iconv_close(cd);
- ;
- return 0;
-}
-_ACEOF
-rm -f conftest.$ac_objext conftest$ac_exeext
-if { (ac_try="$ac_link"
-case "(($ac_try" in
- *\"* | *\`* | *\\*) ac_try_echo=\$ac_try;;
- *) ac_try_echo=$ac_try;;
-esac
-eval ac_try_echo="\"\$as_me:$LINENO: $ac_try_echo\""
-$as_echo "$ac_try_echo") >&5
- (eval "$ac_link") 2>conftest.er1
- ac_status=$?
- grep -v '^ *+' conftest.er1 >conftest.err
- rm -f conftest.er1
- cat conftest.err >&5
- $as_echo "$as_me:$LINENO: \$? = $ac_status" >&5
- (exit $ac_status); } && {
- test -z "$ac_c_werror_flag" ||
- test ! -s conftest.err
- } && test -s conftest$ac_exeext && {
- test "$cross_compiling" = yes ||
- $as_test_x conftest$ac_exeext
- }; then
- am_cv_lib_iconv=yes
- am_cv_func_iconv=yes
-else
- $as_echo "$as_me: failed program was:" >&5
-sed 's/^/| /' conftest.$ac_ext >&5
-
-
-fi
-
-rm -rf conftest.dSYM
-rm -f core conftest.err conftest.$ac_objext conftest_ipa8_conftest.oo \
- conftest$ac_exeext conftest.$ac_ext
- LIBS="$am_save_LIBS"
- fi
-
-fi
-{ $as_echo "$as_me:$LINENO: result: $am_cv_func_iconv" >&5
-$as_echo "$am_cv_func_iconv" >&6; }
- if test "$am_cv_func_iconv" = yes; then
-
-cat >>confdefs.h <<\_ACEOF
-#define HAVE_ICONV 1
-_ACEOF
-
- fi
- if test "$am_cv_lib_iconv" = yes; then
- { $as_echo "$as_me:$LINENO: checking how to link with libiconv" >&5
-$as_echo_n "checking how to link with libiconv... " >&6; }
- { $as_echo "$as_me:$LINENO: result: $LIBICONV" >&5
-$as_echo "$LIBICONV" >&6; }
- else
- CPPFLAGS="$am_save_CPPFLAGS"
- LIBICONV=
- LTLIBICONV=
- fi
-
-
-
-
-
-
-
- use_additional=yes
-
- acl_save_prefix="$prefix"
- prefix="$acl_final_prefix"
- acl_save_exec_prefix="$exec_prefix"
- exec_prefix="$acl_final_exec_prefix"
-
- eval additional_includedir=\"$includedir\"
- eval additional_libdir=\"$libdir\"
-
- exec_prefix="$acl_save_exec_prefix"
- prefix="$acl_save_prefix"
-
-
-# Check whether --with-libintl-prefix was given.
-if test "${with_libintl_prefix+set}" = set; then
- withval=$with_libintl_prefix;
- if test "X$withval" = "Xno"; then
- use_additional=no
- else
- if test "X$withval" = "X"; then
-
- acl_save_prefix="$prefix"
- prefix="$acl_final_prefix"
- acl_save_exec_prefix="$exec_prefix"
- exec_prefix="$acl_final_exec_prefix"
-
- eval additional_includedir=\"$includedir\"
- eval additional_libdir=\"$libdir\"
-
- exec_prefix="$acl_save_exec_prefix"
- prefix="$acl_save_prefix"
-
- else
- additional_includedir="$withval/include"
- additional_libdir="$withval/$acl_libdirstem"
- fi
- fi
-
-fi
-
- LIBINTL=
- LTLIBINTL=
- INCINTL=
- rpathdirs=
- ltrpathdirs=
- names_already_handled=
- names_next_round='intl '
- while test -n "$names_next_round"; do
- names_this_round="$names_next_round"
- names_next_round=
- for name in $names_this_round; do
- already_handled=
- for n in $names_already_handled; do
- if test "$n" = "$name"; then
- already_handled=yes
- break
- fi
- done
- if test -z "$already_handled"; then
- names_already_handled="$names_already_handled $name"
- uppername=`echo "$name" | sed -e 'y|abcdefghijklmnopqrstuvwxyz./-|ABCDEFGHIJKLMNOPQRSTUVWXYZ___|'`
- eval value=\"\$HAVE_LIB$uppername\"
- if test -n "$value"; then
- if test "$value" = yes; then
- eval value=\"\$LIB$uppername\"
- test -z "$value" || LIBINTL="${LIBINTL}${LIBINTL:+ }$value"
- eval value=\"\$LTLIB$uppername\"
- test -z "$value" || LTLIBINTL="${LTLIBINTL}${LTLIBINTL:+ }$value"
- else
- :
- fi
- else
- found_dir=
- found_la=
- found_so=
- found_a=
- if test $use_additional = yes; then
- if test -n "$shlibext" \
- && { test -f "$additional_libdir/lib$name.$shlibext" \
- || { test "$shlibext" = dll \
- && test -f "$additional_libdir/lib$name.dll.a"; }; }; then
- found_dir="$additional_libdir"
- if test -f "$additional_libdir/lib$name.$shlibext"; then
- found_so="$additional_libdir/lib$name.$shlibext"
- else
- found_so="$additional_libdir/lib$name.dll.a"
- fi
- if test -f "$additional_libdir/lib$name.la"; then
- found_la="$additional_libdir/lib$name.la"
- fi
- else
- if test -f "$additional_libdir/lib$name.$libext"; then
- found_dir="$additional_libdir"
- found_a="$additional_libdir/lib$name.$libext"
- if test -f "$additional_libdir/lib$name.la"; then
- found_la="$additional_libdir/lib$name.la"
- fi
- fi
- fi
- fi
- if test "X$found_dir" = "X"; then
- for x in $LDFLAGS $LTLIBINTL; do
-
- acl_save_prefix="$prefix"
- prefix="$acl_final_prefix"
- acl_save_exec_prefix="$exec_prefix"
- exec_prefix="$acl_final_exec_prefix"
- eval x=\"$x\"
- exec_prefix="$acl_save_exec_prefix"
- prefix="$acl_save_prefix"
-
- case "$x" in
- -L*)
- dir=`echo "X$x" | sed -e 's/^X-L//'`
- if test -n "$shlibext" \
- && { test -f "$dir/lib$name.$shlibext" \
- || { test "$shlibext" = dll \
- && test -f "$dir/lib$name.dll.a"; }; }; then
- found_dir="$dir"
- if test -f "$dir/lib$name.$shlibext"; then
- found_so="$dir/lib$name.$shlibext"
- else
- found_so="$dir/lib$name.dll.a"
- fi
- if test -f "$dir/lib$name.la"; then
- found_la="$dir/lib$name.la"
- fi
- else
- if test -f "$dir/lib$name.$libext"; then
- found_dir="$dir"
- found_a="$dir/lib$name.$libext"
- if test -f "$dir/lib$name.la"; then
- found_la="$dir/lib$name.la"
- fi
- fi
- fi
- ;;
- esac
- if test "X$found_dir" != "X"; then
- break
- fi
- done
- fi
- if test "X$found_dir" != "X"; then
- LTLIBINTL="${LTLIBINTL}${LTLIBINTL:+ }-L$found_dir -l$name"
- if test "X$found_so" != "X"; then
- if test "$enable_rpath" = no || test "X$found_dir" = "X/usr/$acl_libdirstem"; then
- LIBINTL="${LIBINTL}${LIBINTL:+ }$found_so"
- else
- haveit=
- for x in $ltrpathdirs; do
- if test "X$x" = "X$found_dir"; then
- haveit=yes
- break
- fi
- done
- if test -z "$haveit"; then
- ltrpathdirs="$ltrpathdirs $found_dir"
- fi
- if test "$hardcode_direct" = yes; then
- LIBINTL="${LIBINTL}${LIBINTL:+ }$found_so"
- else
- if test -n "$hardcode_libdir_flag_spec" && test "$hardcode_minus_L" = no; then
- LIBINTL="${LIBINTL}${LIBINTL:+ }$found_so"
- haveit=
- for x in $rpathdirs; do
- if test "X$x" = "X$found_dir"; then
- haveit=yes
- break
- fi
- done
- if test -z "$haveit"; then
- rpathdirs="$rpathdirs $found_dir"
- fi
- else
- haveit=
- for x in $LDFLAGS $LIBINTL; do
-
- acl_save_prefix="$prefix"
- prefix="$acl_final_prefix"
- acl_save_exec_prefix="$exec_prefix"
- exec_prefix="$acl_final_exec_prefix"
- eval x=\"$x\"
- exec_prefix="$acl_save_exec_prefix"
- prefix="$acl_save_prefix"
-
- if test "X$x" = "X-L$found_dir"; then
- haveit=yes
- break
- fi
- done
- if test -z "$haveit"; then
- LIBINTL="${LIBINTL}${LIBINTL:+ }-L$found_dir"
- fi
- if test "$hardcode_minus_L" != no; then
- LIBINTL="${LIBINTL}${LIBINTL:+ }$found_so"
- else
- LIBINTL="${LIBINTL}${LIBINTL:+ }-l$name"
- fi
- fi
- fi
- fi
- else
- if test "X$found_a" != "X"; then
- LIBINTL="${LIBINTL}${LIBINTL:+ }$found_a"
- else
- LIBINTL="${LIBINTL}${LIBINTL:+ }-L$found_dir -l$name"
- fi
- fi
- additional_includedir=
- case "$found_dir" in
- */$acl_libdirstem | */$acl_libdirstem/)
- basedir=`echo "X$found_dir" | sed -e 's,^X,,' -e "s,/$acl_libdirstem/"'*$,,'`
- additional_includedir="$basedir/include"
- ;;
- esac
- if test "X$additional_includedir" != "X"; then
- if test "X$additional_includedir" != "X/usr/include"; then
- haveit=
- if test "X$additional_includedir" = "X/usr/local/include"; then
- if test -n "$GCC"; then
- case $host_os in
- linux* | gnu* | k*bsd*-gnu) haveit=yes;;
- esac
- fi
- fi
- if test -z "$haveit"; then
- for x in $CPPFLAGS $INCINTL; do
-
- acl_save_prefix="$prefix"
- prefix="$acl_final_prefix"
- acl_save_exec_prefix="$exec_prefix"
- exec_prefix="$acl_final_exec_prefix"
- eval x=\"$x\"
- exec_prefix="$acl_save_exec_prefix"
- prefix="$acl_save_prefix"
-
- if test "X$x" = "X-I$additional_includedir"; then
- haveit=yes
- break
- fi
- done
- if test -z "$haveit"; then
- if test -d "$additional_includedir"; then
- INCINTL="${INCINTL}${INCINTL:+ }-I$additional_includedir"
- fi
- fi
- fi
- fi
- fi
- if test -n "$found_la"; then
- save_libdir="$libdir"
- case "$found_la" in
- */* | *\\*) . "$found_la" ;;
- *) . "./$found_la" ;;
- esac
- libdir="$save_libdir"
- for dep in $dependency_libs; do
- case "$dep" in
- -L*)
- additional_libdir=`echo "X$dep" | sed -e 's/^X-L//'`
- if test "X$additional_libdir" != "X/usr/$acl_libdirstem"; then
- haveit=
- if test "X$additional_libdir" = "X/usr/local/$acl_libdirstem"; then
- if test -n "$GCC"; then
- case $host_os in
- linux* | gnu* | k*bsd*-gnu) haveit=yes;;
- esac
- fi
- fi
- if test -z "$haveit"; then
- haveit=
- for x in $LDFLAGS $LIBINTL; do
-
- acl_save_prefix="$prefix"
- prefix="$acl_final_prefix"
- acl_save_exec_prefix="$exec_prefix"
- exec_prefix="$acl_final_exec_prefix"
- eval x=\"$x\"
- exec_prefix="$acl_save_exec_prefix"
- prefix="$acl_save_prefix"
-
- if test "X$x" = "X-L$additional_libdir"; then
- haveit=yes
- break
- fi
- done
- if test -z "$haveit"; then
- if test -d "$additional_libdir"; then
- LIBINTL="${LIBINTL}${LIBINTL:+ }-L$additional_libdir"
- fi
- fi
- haveit=
- for x in $LDFLAGS $LTLIBINTL; do
-
- acl_save_prefix="$prefix"
- prefix="$acl_final_prefix"
- acl_save_exec_prefix="$exec_prefix"
- exec_prefix="$acl_final_exec_prefix"
- eval x=\"$x\"
- exec_prefix="$acl_save_exec_prefix"
- prefix="$acl_save_prefix"
-
- if test "X$x" = "X-L$additional_libdir"; then
- haveit=yes
- break
- fi
- done
- if test -z "$haveit"; then
- if test -d "$additional_libdir"; then
- LTLIBINTL="${LTLIBINTL}${LTLIBINTL:+ }-L$additional_libdir"
- fi
- fi
- fi
- fi
- ;;
- -R*)
- dir=`echo "X$dep" | sed -e 's/^X-R//'`
- if test "$enable_rpath" != no; then
- haveit=
- for x in $rpathdirs; do
- if test "X$x" = "X$dir"; then
- haveit=yes
- break
- fi
- done
- if test -z "$haveit"; then
- rpathdirs="$rpathdirs $dir"
- fi
- haveit=
- for x in $ltrpathdirs; do
- if test "X$x" = "X$dir"; then
- haveit=yes
- break
- fi
- done
- if test -z "$haveit"; then
- ltrpathdirs="$ltrpathdirs $dir"
- fi
- fi
- ;;
- -l*)
- names_next_round="$names_next_round "`echo "X$dep" | sed -e 's/^X-l//'`
- ;;
- *.la)
- names_next_round="$names_next_round "`echo "X$dep" | sed -e 's,^X.*/,,' -e 's,^lib,,' -e 's,\.la$,,'`
- ;;
- *)
- LIBINTL="${LIBINTL}${LIBINTL:+ }$dep"
- LTLIBINTL="${LTLIBINTL}${LTLIBINTL:+ }$dep"
- ;;
- esac
- done
- fi
- else
- LIBINTL="${LIBINTL}${LIBINTL:+ }-l$name"
- LTLIBINTL="${LTLIBINTL}${LTLIBINTL:+ }-l$name"
- fi
- fi
- fi
- done
- done
- if test "X$rpathdirs" != "X"; then
- if test -n "$hardcode_libdir_separator"; then
- alldirs=
- for found_dir in $rpathdirs; do
- alldirs="${alldirs}${alldirs:+$hardcode_libdir_separator}$found_dir"
- done
- acl_save_libdir="$libdir"
- libdir="$alldirs"
- eval flag=\"$hardcode_libdir_flag_spec\"
- libdir="$acl_save_libdir"
- LIBINTL="${LIBINTL}${LIBINTL:+ }$flag"
- else
- for found_dir in $rpathdirs; do
- acl_save_libdir="$libdir"
- libdir="$found_dir"
- eval flag=\"$hardcode_libdir_flag_spec\"
- libdir="$acl_save_libdir"
- LIBINTL="${LIBINTL}${LIBINTL:+ }$flag"
- done
- fi
- fi
- if test "X$ltrpathdirs" != "X"; then
- for found_dir in $ltrpathdirs; do
- LTLIBINTL="${LTLIBINTL}${LTLIBINTL:+ }-R$found_dir"
- done
- fi
-
- { $as_echo "$as_me:$LINENO: checking for GNU gettext in libintl" >&5
-$as_echo_n "checking for GNU gettext in libintl... " >&6; }
-if { as_var=$gt_func_gnugettext_libintl; eval "test \"\${$as_var+set}\" = set"; }; then
- $as_echo_n "(cached) " >&6
-else
- gt_save_CPPFLAGS="$CPPFLAGS"
- CPPFLAGS="$CPPFLAGS $INCINTL"
- gt_save_LIBS="$LIBS"
- LIBS="$LIBS $LIBINTL"
- cat >conftest.$ac_ext <<_ACEOF
-/* confdefs.h. */
-_ACEOF
-cat confdefs.h >>conftest.$ac_ext
-cat >>conftest.$ac_ext <<_ACEOF
-/* end confdefs.h. */
-#include <libintl.h>
-$gt_revision_test_code
-extern int _nl_msg_cat_cntr;
-extern
-#ifdef __cplusplus
-"C"
-#endif
-const char *_nl_expand_alias (const char *);
-int
-main ()
-{
-bindtextdomain ("", "");
-return * gettext ("")$gt_expression_test_code + _nl_msg_cat_cntr + *_nl_expand_alias ("")
- ;
- return 0;
-}
-_ACEOF
-rm -f conftest.$ac_objext conftest$ac_exeext
-if { (ac_try="$ac_link"
-case "(($ac_try" in
- *\"* | *\`* | *\\*) ac_try_echo=\$ac_try;;
- *) ac_try_echo=$ac_try;;
-esac
-eval ac_try_echo="\"\$as_me:$LINENO: $ac_try_echo\""
-$as_echo "$ac_try_echo") >&5
- (eval "$ac_link") 2>conftest.er1
- ac_status=$?
- grep -v '^ *+' conftest.er1 >conftest.err
- rm -f conftest.er1
- cat conftest.err >&5
- $as_echo "$as_me:$LINENO: \$? = $ac_status" >&5
- (exit $ac_status); } && {
- test -z "$ac_c_werror_flag" ||
- test ! -s conftest.err
- } && test -s conftest$ac_exeext && {
- test "$cross_compiling" = yes ||
- $as_test_x conftest$ac_exeext
- }; then
- eval "$gt_func_gnugettext_libintl=yes"
-else
- $as_echo "$as_me: failed program was:" >&5
-sed 's/^/| /' conftest.$ac_ext >&5
-
- eval "$gt_func_gnugettext_libintl=no"
-fi
-
-rm -rf conftest.dSYM
-rm -f core conftest.err conftest.$ac_objext conftest_ipa8_conftest.oo \
- conftest$ac_exeext conftest.$ac_ext
- if { eval "gt_val=\$$gt_func_gnugettext_libintl"; test "$gt_val" != yes; } && test -n "$LIBICONV"; then
- LIBS="$LIBS $LIBICONV"
- cat >conftest.$ac_ext <<_ACEOF
-/* confdefs.h. */
-_ACEOF
-cat confdefs.h >>conftest.$ac_ext
-cat >>conftest.$ac_ext <<_ACEOF
-/* end confdefs.h. */
-#include <libintl.h>
-$gt_revision_test_code
-extern int _nl_msg_cat_cntr;
-extern
-#ifdef __cplusplus
-"C"
-#endif
-const char *_nl_expand_alias (const char *);
-int
-main ()
-{
-bindtextdomain ("", "");
-return * gettext ("")$gt_expression_test_code + _nl_msg_cat_cntr + *_nl_expand_alias ("")
- ;
- return 0;
-}
-_ACEOF
-rm -f conftest.$ac_objext conftest$ac_exeext
-if { (ac_try="$ac_link"
-case "(($ac_try" in
- *\"* | *\`* | *\\*) ac_try_echo=\$ac_try;;
- *) ac_try_echo=$ac_try;;
-esac
-eval ac_try_echo="\"\$as_me:$LINENO: $ac_try_echo\""
-$as_echo "$ac_try_echo") >&5
- (eval "$ac_link") 2>conftest.er1
- ac_status=$?
- grep -v '^ *+' conftest.er1 >conftest.err
- rm -f conftest.er1
- cat conftest.err >&5
- $as_echo "$as_me:$LINENO: \$? = $ac_status" >&5
- (exit $ac_status); } && {
- test -z "$ac_c_werror_flag" ||
- test ! -s conftest.err
- } && test -s conftest$ac_exeext && {
- test "$cross_compiling" = yes ||
- $as_test_x conftest$ac_exeext
- }; then
- LIBINTL="$LIBINTL $LIBICONV"
- LTLIBINTL="$LTLIBINTL $LTLIBICONV"
- eval "$gt_func_gnugettext_libintl=yes"
-
-else
- $as_echo "$as_me: failed program was:" >&5
-sed 's/^/| /' conftest.$ac_ext >&5
-
-
-fi
-
-rm -rf conftest.dSYM
-rm -f core conftest.err conftest.$ac_objext conftest_ipa8_conftest.oo \
- conftest$ac_exeext conftest.$ac_ext
- fi
- CPPFLAGS="$gt_save_CPPFLAGS"
- LIBS="$gt_save_LIBS"
-fi
-ac_res=`eval 'as_val=${'$gt_func_gnugettext_libintl'}
- $as_echo "$as_val"'`
- { $as_echo "$as_me:$LINENO: result: $ac_res" >&5
-$as_echo "$ac_res" >&6; }
- fi
-
- if { eval "gt_val=\$$gt_func_gnugettext_libc"; test "$gt_val" = "yes"; } \
- || { { eval "gt_val=\$$gt_func_gnugettext_libintl"; test "$gt_val" = "yes"; } \
- && test "$PACKAGE" != gettext-runtime \
- && test "$PACKAGE" != gettext-tools; }; then
- gt_use_preinstalled_gnugettext=yes
- else
- LIBINTL=
- LTLIBINTL=
- INCINTL=
- fi
-
-
-
- if test -n "$INTL_MACOSX_LIBS"; then
- if test "$gt_use_preinstalled_gnugettext" = "yes" \
- || test "$nls_cv_use_gnu_gettext" = "yes"; then
- LIBINTL="$LIBINTL $INTL_MACOSX_LIBS"
- LTLIBINTL="$LTLIBINTL $INTL_MACOSX_LIBS"
- fi
- fi
-
- if test "$gt_use_preinstalled_gnugettext" = "yes" \
- || test "$nls_cv_use_gnu_gettext" = "yes"; then
-
-cat >>confdefs.h <<\_ACEOF
-#define ENABLE_NLS 1
-_ACEOF
-
- else
- USE_NLS=no
- fi
- fi
-
- { $as_echo "$as_me:$LINENO: checking whether to use NLS" >&5
-$as_echo_n "checking whether to use NLS... " >&6; }
- { $as_echo "$as_me:$LINENO: result: $USE_NLS" >&5
-$as_echo "$USE_NLS" >&6; }
- if test "$USE_NLS" = "yes"; then
- { $as_echo "$as_me:$LINENO: checking where the gettext function comes from" >&5
-$as_echo_n "checking where the gettext function comes from... " >&6; }
- if test "$gt_use_preinstalled_gnugettext" = "yes"; then
- if { eval "gt_val=\$$gt_func_gnugettext_libintl"; test "$gt_val" = "yes"; }; then
- gt_source="external libintl"
- else
- gt_source="libc"
- fi
- else
- gt_source="included intl directory"
- fi
- { $as_echo "$as_me:$LINENO: result: $gt_source" >&5
-$as_echo "$gt_source" >&6; }
- fi
-
- if test "$USE_NLS" = "yes"; then
-
- if test "$gt_use_preinstalled_gnugettext" = "yes"; then
- if { eval "gt_val=\$$gt_func_gnugettext_libintl"; test "$gt_val" = "yes"; }; then
- { $as_echo "$as_me:$LINENO: checking how to link with libintl" >&5
-$as_echo_n "checking how to link with libintl... " >&6; }
- { $as_echo "$as_me:$LINENO: result: $LIBINTL" >&5
-$as_echo "$LIBINTL" >&6; }
-
- for element in $INCINTL; do
- haveit=
- for x in $CPPFLAGS; do
-
- acl_save_prefix="$prefix"
- prefix="$acl_final_prefix"
- acl_save_exec_prefix="$exec_prefix"
- exec_prefix="$acl_final_exec_prefix"
- eval x=\"$x\"
- exec_prefix="$acl_save_exec_prefix"
- prefix="$acl_save_prefix"
-
- if test "X$x" = "X$element"; then
- haveit=yes
- break
- fi
- done
- if test -z "$haveit"; then
- CPPFLAGS="${CPPFLAGS}${CPPFLAGS:+ }$element"
- fi
- done
-
- fi
-
-
-cat >>confdefs.h <<\_ACEOF
-#define HAVE_GETTEXT 1
-_ACEOF
-
-
-cat >>confdefs.h <<\_ACEOF
-#define HAVE_DCGETTEXT 1
-_ACEOF
-
- fi
-
- POSUB=po
- fi
-
-
-
- INTLLIBS="$LIBINTL"
-
-
-
-
-
-
-
-###############################################################################
-# Checks for header files.
-###############################################################################
-
-echo
-echo "System headers and functions:"
-
-# There is currently no workarounds in this package if some of
-# these headers are missing.
-
-
-
-for ac_header in fcntl.h limits.h sys/time.h
-do
-as_ac_Header=`$as_echo "ac_cv_header_$ac_header" | $as_tr_sh`
-if { as_var=$as_ac_Header; eval "test \"\${$as_var+set}\" = set"; }; then
- { $as_echo "$as_me:$LINENO: checking for $ac_header" >&5
-$as_echo_n "checking for $ac_header... " >&6; }
-if { as_var=$as_ac_Header; eval "test \"\${$as_var+set}\" = set"; }; then
- $as_echo_n "(cached) " >&6
-fi
-ac_res=`eval 'as_val=${'$as_ac_Header'}
- $as_echo "$as_val"'`
- { $as_echo "$as_me:$LINENO: result: $ac_res" >&5
-$as_echo "$ac_res" >&6; }
-else
- # Is the header compilable?
-{ $as_echo "$as_me:$LINENO: checking $ac_header usability" >&5
-$as_echo_n "checking $ac_header usability... " >&6; }
-cat >conftest.$ac_ext <<_ACEOF
-/* confdefs.h. */
-_ACEOF
-cat confdefs.h >>conftest.$ac_ext
-cat >>conftest.$ac_ext <<_ACEOF
-/* end confdefs.h. */
-$ac_includes_default
-#include <$ac_header>
-_ACEOF
-rm -f conftest.$ac_objext
-if { (ac_try="$ac_compile"
-case "(($ac_try" in
- *\"* | *\`* | *\\*) ac_try_echo=\$ac_try;;
- *) ac_try_echo=$ac_try;;
-esac
-eval ac_try_echo="\"\$as_me:$LINENO: $ac_try_echo\""
-$as_echo "$ac_try_echo") >&5
- (eval "$ac_compile") 2>conftest.er1
- ac_status=$?
- grep -v '^ *+' conftest.er1 >conftest.err
- rm -f conftest.er1
- cat conftest.err >&5
- $as_echo "$as_me:$LINENO: \$? = $ac_status" >&5
- (exit $ac_status); } && {
- test -z "$ac_c_werror_flag" ||
- test ! -s conftest.err
- } && test -s conftest.$ac_objext; then
- ac_header_compiler=yes
-else
- $as_echo "$as_me: failed program was:" >&5
-sed 's/^/| /' conftest.$ac_ext >&5
-
- ac_header_compiler=no
-fi
-
-rm -f core conftest.err conftest.$ac_objext conftest.$ac_ext
-{ $as_echo "$as_me:$LINENO: result: $ac_header_compiler" >&5
-$as_echo "$ac_header_compiler" >&6; }
-
-# Is the header present?
-{ $as_echo "$as_me:$LINENO: checking $ac_header presence" >&5
-$as_echo_n "checking $ac_header presence... " >&6; }
-cat >conftest.$ac_ext <<_ACEOF
-/* confdefs.h. */
-_ACEOF
-cat confdefs.h >>conftest.$ac_ext
-cat >>conftest.$ac_ext <<_ACEOF
-/* end confdefs.h. */
-#include <$ac_header>
-_ACEOF
-if { (ac_try="$ac_cpp conftest.$ac_ext"
-case "(($ac_try" in
- *\"* | *\`* | *\\*) ac_try_echo=\$ac_try;;
- *) ac_try_echo=$ac_try;;
-esac
-eval ac_try_echo="\"\$as_me:$LINENO: $ac_try_echo\""
-$as_echo "$ac_try_echo") >&5
- (eval "$ac_cpp conftest.$ac_ext") 2>conftest.er1
- ac_status=$?
- grep -v '^ *+' conftest.er1 >conftest.err
- rm -f conftest.er1
- cat conftest.err >&5
- $as_echo "$as_me:$LINENO: \$? = $ac_status" >&5
- (exit $ac_status); } >/dev/null && {
- test -z "$ac_c_preproc_warn_flag$ac_c_werror_flag" ||
- test ! -s conftest.err
- }; then
- ac_header_preproc=yes
-else
- $as_echo "$as_me: failed program was:" >&5
-sed 's/^/| /' conftest.$ac_ext >&5
-
- ac_header_preproc=no
-fi
-
-rm -f conftest.err conftest.$ac_ext
-{ $as_echo "$as_me:$LINENO: result: $ac_header_preproc" >&5
-$as_echo "$ac_header_preproc" >&6; }
-
-# So? What about this header?
-case $ac_header_compiler:$ac_header_preproc:$ac_c_preproc_warn_flag in
- yes:no: )
- { $as_echo "$as_me:$LINENO: WARNING: $ac_header: accepted by the compiler, rejected by the preprocessor!" >&5
-$as_echo "$as_me: WARNING: $ac_header: accepted by the compiler, rejected by the preprocessor!" >&2;}
- { $as_echo "$as_me:$LINENO: WARNING: $ac_header: proceeding with the compiler's result" >&5
-$as_echo "$as_me: WARNING: $ac_header: proceeding with the compiler's result" >&2;}
- ac_header_preproc=yes
- ;;
- no:yes:* )
- { $as_echo "$as_me:$LINENO: WARNING: $ac_header: present but cannot be compiled" >&5
-$as_echo "$as_me: WARNING: $ac_header: present but cannot be compiled" >&2;}
- { $as_echo "$as_me:$LINENO: WARNING: $ac_header: check for missing prerequisite headers?" >&5
-$as_echo "$as_me: WARNING: $ac_header: check for missing prerequisite headers?" >&2;}
- { $as_echo "$as_me:$LINENO: WARNING: $ac_header: see the Autoconf documentation" >&5
-$as_echo "$as_me: WARNING: $ac_header: see the Autoconf documentation" >&2;}
- { $as_echo "$as_me:$LINENO: WARNING: $ac_header: section \"Present But Cannot Be Compiled\"" >&5
-$as_echo "$as_me: WARNING: $ac_header: section \"Present But Cannot Be Compiled\"" >&2;}
- { $as_echo "$as_me:$LINENO: WARNING: $ac_header: proceeding with the preprocessor's result" >&5
-$as_echo "$as_me: WARNING: $ac_header: proceeding with the preprocessor's result" >&2;}
- { $as_echo "$as_me:$LINENO: WARNING: $ac_header: in the future, the compiler will take precedence" >&5
-$as_echo "$as_me: WARNING: $ac_header: in the future, the compiler will take precedence" >&2;}
- ( cat <<\_ASBOX
-## --------------------------------------- ##
-## Report this to lasse.collin@tukaani.org ##
-## --------------------------------------- ##
-_ASBOX
- ) | sed "s/^/$as_me: WARNING: /" >&2
- ;;
-esac
-{ $as_echo "$as_me:$LINENO: checking for $ac_header" >&5
-$as_echo_n "checking for $ac_header... " >&6; }
-if { as_var=$as_ac_Header; eval "test \"\${$as_var+set}\" = set"; }; then
- $as_echo_n "(cached) " >&6
-else
- eval "$as_ac_Header=\$ac_header_preproc"
-fi
-ac_res=`eval 'as_val=${'$as_ac_Header'}
- $as_echo "$as_val"'`
- { $as_echo "$as_me:$LINENO: result: $ac_res" >&5
-$as_echo "$ac_res" >&6; }
-
-fi
-if test `eval 'as_val=${'$as_ac_Header'}
- $as_echo "$as_val"'` = yes; then
- cat >>confdefs.h <<_ACEOF
-#define `$as_echo "HAVE_$ac_header" | $as_tr_cpp` 1
-_ACEOF
-
-else
- { { $as_echo "$as_me:$LINENO: error: Required header file(s) are missing." >&5
-$as_echo "$as_me: error: Required header file(s) are missing." >&2;}
- { (exit 1); exit 1; }; }
-fi
-
-done
-
-
-# If any of these headers are missing, things should still work correctly:
-
-
-
-for ac_header in sys/param.h sys/sysctl.h byteswap.h
-do
-as_ac_Header=`$as_echo "ac_cv_header_$ac_header" | $as_tr_sh`
-{ $as_echo "$as_me:$LINENO: checking for $ac_header" >&5
-$as_echo_n "checking for $ac_header... " >&6; }
-if { as_var=$as_ac_Header; eval "test \"\${$as_var+set}\" = set"; }; then
- $as_echo_n "(cached) " >&6
-else
- cat >conftest.$ac_ext <<_ACEOF
-/* confdefs.h. */
-_ACEOF
-cat confdefs.h >>conftest.$ac_ext
-cat >>conftest.$ac_ext <<_ACEOF
-/* end confdefs.h. */
-
-#ifdef HAVE_SYS_PARAM_H
-# include <sys/param.h>
-#endif
-
-
-#include <$ac_header>
-_ACEOF
-rm -f conftest.$ac_objext
-if { (ac_try="$ac_compile"
-case "(($ac_try" in
- *\"* | *\`* | *\\*) ac_try_echo=\$ac_try;;
- *) ac_try_echo=$ac_try;;
-esac
-eval ac_try_echo="\"\$as_me:$LINENO: $ac_try_echo\""
-$as_echo "$ac_try_echo") >&5
- (eval "$ac_compile") 2>conftest.er1
- ac_status=$?
- grep -v '^ *+' conftest.er1 >conftest.err
- rm -f conftest.er1
- cat conftest.err >&5
- $as_echo "$as_me:$LINENO: \$? = $ac_status" >&5
- (exit $ac_status); } && {
- test -z "$ac_c_werror_flag" ||
- test ! -s conftest.err
- } && test -s conftest.$ac_objext; then
- eval "$as_ac_Header=yes"
-else
- $as_echo "$as_me: failed program was:" >&5
-sed 's/^/| /' conftest.$ac_ext >&5
-
- eval "$as_ac_Header=no"
-fi
-
-rm -f core conftest.err conftest.$ac_objext conftest.$ac_ext
-fi
-ac_res=`eval 'as_val=${'$as_ac_Header'}
- $as_echo "$as_val"'`
- { $as_echo "$as_me:$LINENO: result: $ac_res" >&5
-$as_echo "$ac_res" >&6; }
-if test `eval 'as_val=${'$as_ac_Header'}
- $as_echo "$as_val"'` = yes; then
- cat >>confdefs.h <<_ACEOF
-#define `$as_echo "HAVE_$ac_header" | $as_tr_cpp` 1
-_ACEOF
-
-fi
-
-done
-
-
-# Even if we have byteswap.h, we may lack the specific macros/functions.
-if test x$ac_cv_header_byteswap_h = xyes ; then
-
- { $as_echo "$as_me:$LINENO: checking if bswap_16 is available" >&5
-$as_echo_n "checking if bswap_16 is available... " >&6; }
- cat >conftest.$ac_ext <<_ACEOF
-/* confdefs.h. */
-_ACEOF
-cat confdefs.h >>conftest.$ac_ext
-cat >>conftest.$ac_ext <<_ACEOF
-/* end confdefs.h. */
-
-#include <byteswap.h>
-int
-main(void)
-{
- bswap_16(42);
- return 0;
-}
-
-_ACEOF
-rm -f conftest.$ac_objext conftest$ac_exeext
-if { (ac_try="$ac_link"
-case "(($ac_try" in
- *\"* | *\`* | *\\*) ac_try_echo=\$ac_try;;
- *) ac_try_echo=$ac_try;;
-esac
-eval ac_try_echo="\"\$as_me:$LINENO: $ac_try_echo\""
-$as_echo "$ac_try_echo") >&5
- (eval "$ac_link") 2>conftest.er1
- ac_status=$?
- grep -v '^ *+' conftest.er1 >conftest.err
- rm -f conftest.er1
- cat conftest.err >&5
- $as_echo "$as_me:$LINENO: \$? = $ac_status" >&5
- (exit $ac_status); } && {
- test -z "$ac_c_werror_flag" ||
- test ! -s conftest.err
- } && test -s conftest$ac_exeext && {
- test "$cross_compiling" = yes ||
- $as_test_x conftest$ac_exeext
- }; then
-
-
-cat >>confdefs.h <<\_ACEOF
-#define HAVE_BSWAP_16 1
-_ACEOF
-
- { $as_echo "$as_me:$LINENO: result: yes" >&5
-$as_echo "yes" >&6; }
-
-else
- $as_echo "$as_me: failed program was:" >&5
-sed 's/^/| /' conftest.$ac_ext >&5
-
- { $as_echo "$as_me:$LINENO: result: no" >&5
-$as_echo "no" >&6; }
-fi
-
-rm -rf conftest.dSYM
-rm -f core conftest.err conftest.$ac_objext conftest_ipa8_conftest.oo \
- conftest$ac_exeext conftest.$ac_ext
-
-
- { $as_echo "$as_me:$LINENO: checking if bswap_32 is available" >&5
-$as_echo_n "checking if bswap_32 is available... " >&6; }
- cat >conftest.$ac_ext <<_ACEOF
-/* confdefs.h. */
-_ACEOF
-cat confdefs.h >>conftest.$ac_ext
-cat >>conftest.$ac_ext <<_ACEOF
-/* end confdefs.h. */
-
-#include <byteswap.h>
-int
-main(void)
-{
- bswap_32(42);
- return 0;
-}
-
-_ACEOF
-rm -f conftest.$ac_objext conftest$ac_exeext
-if { (ac_try="$ac_link"
-case "(($ac_try" in
- *\"* | *\`* | *\\*) ac_try_echo=\$ac_try;;
- *) ac_try_echo=$ac_try;;
-esac
-eval ac_try_echo="\"\$as_me:$LINENO: $ac_try_echo\""
-$as_echo "$ac_try_echo") >&5
- (eval "$ac_link") 2>conftest.er1
- ac_status=$?
- grep -v '^ *+' conftest.er1 >conftest.err
- rm -f conftest.er1
- cat conftest.err >&5
- $as_echo "$as_me:$LINENO: \$? = $ac_status" >&5
- (exit $ac_status); } && {
- test -z "$ac_c_werror_flag" ||
- test ! -s conftest.err
- } && test -s conftest$ac_exeext && {
- test "$cross_compiling" = yes ||
- $as_test_x conftest$ac_exeext
- }; then
-
-
-cat >>confdefs.h <<\_ACEOF
-#define HAVE_BSWAP_32 1
-_ACEOF
-
- { $as_echo "$as_me:$LINENO: result: yes" >&5
-$as_echo "yes" >&6; }
-
-else
- $as_echo "$as_me: failed program was:" >&5
-sed 's/^/| /' conftest.$ac_ext >&5
-
- { $as_echo "$as_me:$LINENO: result: no" >&5
-$as_echo "no" >&6; }
-fi
-
-rm -rf conftest.dSYM
-rm -f core conftest.err conftest.$ac_objext conftest_ipa8_conftest.oo \
- conftest$ac_exeext conftest.$ac_ext
-
-
- { $as_echo "$as_me:$LINENO: checking if bswap_64 is available" >&5
-$as_echo_n "checking if bswap_64 is available... " >&6; }
- cat >conftest.$ac_ext <<_ACEOF
-/* confdefs.h. */
-_ACEOF
-cat confdefs.h >>conftest.$ac_ext
-cat >>conftest.$ac_ext <<_ACEOF
-/* end confdefs.h. */
-
-#include <byteswap.h>
-int
-main(void)
-{
- bswap_64(42);
- return 0;
-}
-
-_ACEOF
-rm -f conftest.$ac_objext conftest$ac_exeext
-if { (ac_try="$ac_link"
-case "(($ac_try" in
- *\"* | *\`* | *\\*) ac_try_echo=\$ac_try;;
- *) ac_try_echo=$ac_try;;
-esac
-eval ac_try_echo="\"\$as_me:$LINENO: $ac_try_echo\""
-$as_echo "$ac_try_echo") >&5
- (eval "$ac_link") 2>conftest.er1
- ac_status=$?
- grep -v '^ *+' conftest.er1 >conftest.err
- rm -f conftest.er1
- cat conftest.err >&5
- $as_echo "$as_me:$LINENO: \$? = $ac_status" >&5
- (exit $ac_status); } && {
- test -z "$ac_c_werror_flag" ||
- test ! -s conftest.err
- } && test -s conftest$ac_exeext && {
- test "$cross_compiling" = yes ||
- $as_test_x conftest$ac_exeext
- }; then
-
-
-cat >>confdefs.h <<\_ACEOF
-#define HAVE_BSWAP_64 1
-_ACEOF
-
- { $as_echo "$as_me:$LINENO: result: yes" >&5
-$as_echo "yes" >&6; }
-
-else
- $as_echo "$as_me: failed program was:" >&5
-sed 's/^/| /' conftest.$ac_ext >&5
-
- { $as_echo "$as_me:$LINENO: result: no" >&5
-$as_echo "no" >&6; }
-fi
-
-rm -rf conftest.dSYM
-rm -f core conftest.err conftest.$ac_objext conftest_ipa8_conftest.oo \
- conftest$ac_exeext conftest.$ac_ext
-
- fi
-
-
-###############################################################################
-# Checks for typedefs, structures, and compiler characteristics.
-###############################################################################
-
-
-{ $as_echo "$as_me:$LINENO: checking for stdbool.h that conforms to C99" >&5
-$as_echo_n "checking for stdbool.h that conforms to C99... " >&6; }
-if test "${ac_cv_header_stdbool_h+set}" = set; then
- $as_echo_n "(cached) " >&6
-else
- cat >conftest.$ac_ext <<_ACEOF
-/* confdefs.h. */
-_ACEOF
-cat confdefs.h >>conftest.$ac_ext
-cat >>conftest.$ac_ext <<_ACEOF
-/* end confdefs.h. */
-
-#include <stdbool.h>
-#ifndef bool
- "error: bool is not defined"
-#endif
-#ifndef false
- "error: false is not defined"
-#endif
-#if false
- "error: false is not 0"
-#endif
-#ifndef true
- "error: true is not defined"
-#endif
-#if true != 1
- "error: true is not 1"
-#endif
-#ifndef __bool_true_false_are_defined
- "error: __bool_true_false_are_defined is not defined"
-#endif
-
- struct s { _Bool s: 1; _Bool t; } s;
-
- char a[true == 1 ? 1 : -1];
- char b[false == 0 ? 1 : -1];
- char c[__bool_true_false_are_defined == 1 ? 1 : -1];
- char d[(bool) 0.5 == true ? 1 : -1];
- bool e = &s;
- char f[(_Bool) 0.0 == false ? 1 : -1];
- char g[true];
- char h[sizeof (_Bool)];
- char i[sizeof s.t];
- enum { j = false, k = true, l = false * true, m = true * 256 };
- /* The following fails for
- HP aC++/ANSI C B3910B A.05.55 [Dec 04 2003]. */
- _Bool n[m];
- char o[sizeof n == m * sizeof n[0] ? 1 : -1];
- char p[-1 - (_Bool) 0 < 0 && -1 - (bool) 0 < 0 ? 1 : -1];
-# if defined __xlc__ || defined __GNUC__
- /* Catch a bug in IBM AIX xlc compiler version 6.0.0.0
- reported by James Lemley on 2005-10-05; see
- http://lists.gnu.org/archive/html/bug-coreutils/2005-10/msg00086.html
- This test is not quite right, since xlc is allowed to
- reject this program, as the initializer for xlcbug is
- not one of the forms that C requires support for.
- However, doing the test right would require a runtime
- test, and that would make cross-compilation harder.
- Let us hope that IBM fixes the xlc bug, and also adds
- support for this kind of constant expression. In the
- meantime, this test will reject xlc, which is OK, since
- our stdbool.h substitute should suffice. We also test
- this with GCC, where it should work, to detect more
- quickly whether someone messes up the test in the
- future. */
- char digs[] = "0123456789";
- int xlcbug = 1 / (&(digs + 5)[-2 + (bool) 1] == &digs[4] ? 1 : -1);
-# endif
- /* Catch a bug in an HP-UX C compiler. See
- http://gcc.gnu.org/ml/gcc-patches/2003-12/msg02303.html
- http://lists.gnu.org/archive/html/bug-coreutils/2005-11/msg00161.html
- */
- _Bool q = true;
- _Bool *pq = &q;
-
-int
-main ()
-{
-
- *pq |= q;
- *pq |= ! q;
- /* Refer to every declared value, to avoid compiler optimizations. */
- return (!a + !b + !c + !d + !e + !f + !g + !h + !i + !!j + !k + !!l
- + !m + !n + !o + !p + !q + !pq);
-
- ;
- return 0;
-}
-_ACEOF
-rm -f conftest.$ac_objext
-if { (ac_try="$ac_compile"
-case "(($ac_try" in
- *\"* | *\`* | *\\*) ac_try_echo=\$ac_try;;
- *) ac_try_echo=$ac_try;;
-esac
-eval ac_try_echo="\"\$as_me:$LINENO: $ac_try_echo\""
-$as_echo "$ac_try_echo") >&5
- (eval "$ac_compile") 2>conftest.er1
- ac_status=$?
- grep -v '^ *+' conftest.er1 >conftest.err
- rm -f conftest.er1
- cat conftest.err >&5
- $as_echo "$as_me:$LINENO: \$? = $ac_status" >&5
- (exit $ac_status); } && {
- test -z "$ac_c_werror_flag" ||
- test ! -s conftest.err
- } && test -s conftest.$ac_objext; then
- ac_cv_header_stdbool_h=yes
-else
- $as_echo "$as_me: failed program was:" >&5
-sed 's/^/| /' conftest.$ac_ext >&5
-
- ac_cv_header_stdbool_h=no
-fi
-
-rm -f core conftest.err conftest.$ac_objext conftest.$ac_ext
-fi
-{ $as_echo "$as_me:$LINENO: result: $ac_cv_header_stdbool_h" >&5
-$as_echo "$ac_cv_header_stdbool_h" >&6; }
-{ $as_echo "$as_me:$LINENO: checking for _Bool" >&5
-$as_echo_n "checking for _Bool... " >&6; }
-if test "${ac_cv_type__Bool+set}" = set; then
- $as_echo_n "(cached) " >&6
-else
- ac_cv_type__Bool=no
-cat >conftest.$ac_ext <<_ACEOF
-/* confdefs.h. */
-_ACEOF
-cat confdefs.h >>conftest.$ac_ext
-cat >>conftest.$ac_ext <<_ACEOF
-/* end confdefs.h. */
-$ac_includes_default
-int
-main ()
-{
-if (sizeof (_Bool))
- return 0;
- ;
- return 0;
-}
-_ACEOF
-rm -f conftest.$ac_objext
-if { (ac_try="$ac_compile"
-case "(($ac_try" in
- *\"* | *\`* | *\\*) ac_try_echo=\$ac_try;;
- *) ac_try_echo=$ac_try;;
-esac
-eval ac_try_echo="\"\$as_me:$LINENO: $ac_try_echo\""
-$as_echo "$ac_try_echo") >&5
- (eval "$ac_compile") 2>conftest.er1
- ac_status=$?
- grep -v '^ *+' conftest.er1 >conftest.err
- rm -f conftest.er1
- cat conftest.err >&5
- $as_echo "$as_me:$LINENO: \$? = $ac_status" >&5
- (exit $ac_status); } && {
- test -z "$ac_c_werror_flag" ||
- test ! -s conftest.err
- } && test -s conftest.$ac_objext; then
- cat >conftest.$ac_ext <<_ACEOF
-/* confdefs.h. */
-_ACEOF
-cat confdefs.h >>conftest.$ac_ext
-cat >>conftest.$ac_ext <<_ACEOF
-/* end confdefs.h. */
-$ac_includes_default
-int
-main ()
-{
-if (sizeof ((_Bool)))
- return 0;
- ;
- return 0;
-}
-_ACEOF
-rm -f conftest.$ac_objext
-if { (ac_try="$ac_compile"
-case "(($ac_try" in
- *\"* | *\`* | *\\*) ac_try_echo=\$ac_try;;
- *) ac_try_echo=$ac_try;;
-esac
-eval ac_try_echo="\"\$as_me:$LINENO: $ac_try_echo\""
-$as_echo "$ac_try_echo") >&5
- (eval "$ac_compile") 2>conftest.er1
- ac_status=$?
- grep -v '^ *+' conftest.er1 >conftest.err
- rm -f conftest.er1
- cat conftest.err >&5
- $as_echo "$as_me:$LINENO: \$? = $ac_status" >&5
- (exit $ac_status); } && {
- test -z "$ac_c_werror_flag" ||
- test ! -s conftest.err
- } && test -s conftest.$ac_objext; then
- :
-else
- $as_echo "$as_me: failed program was:" >&5
-sed 's/^/| /' conftest.$ac_ext >&5
-
- ac_cv_type__Bool=yes
-fi
-
-rm -f core conftest.err conftest.$ac_objext conftest.$ac_ext
-else
- $as_echo "$as_me: failed program was:" >&5
-sed 's/^/| /' conftest.$ac_ext >&5
-
-
-fi
-
-rm -f core conftest.err conftest.$ac_objext conftest.$ac_ext
-fi
-{ $as_echo "$as_me:$LINENO: result: $ac_cv_type__Bool" >&5
-$as_echo "$ac_cv_type__Bool" >&6; }
-if test $ac_cv_type__Bool = yes; then
-
-cat >>confdefs.h <<_ACEOF
-#define HAVE__BOOL 1
-_ACEOF
-
-
-fi
-
-if test $ac_cv_header_stdbool_h = yes; then
-
-cat >>confdefs.h <<\_ACEOF
-#define HAVE_STDBOOL_H 1
-_ACEOF
-
-fi
-
-
-
- { $as_echo "$as_me:$LINENO: checking for uint8_t" >&5
-$as_echo_n "checking for uint8_t... " >&6; }
-if test "${ac_cv_c_uint8_t+set}" = set; then
- $as_echo_n "(cached) " >&6
-else
- ac_cv_c_uint8_t=no
- for ac_type in 'uint8_t' 'unsigned int' 'unsigned long int' \
- 'unsigned long long int' 'unsigned short int' 'unsigned char'; do
- cat >conftest.$ac_ext <<_ACEOF
-/* confdefs.h. */
-_ACEOF
-cat confdefs.h >>conftest.$ac_ext
-cat >>conftest.$ac_ext <<_ACEOF
-/* end confdefs.h. */
-$ac_includes_default
-int
-main ()
-{
-static int test_array [1 - 2 * !(($ac_type) -1 >> (8 - 1) == 1)];
-test_array [0] = 0
-
- ;
- return 0;
-}
-_ACEOF
-rm -f conftest.$ac_objext
-if { (ac_try="$ac_compile"
-case "(($ac_try" in
- *\"* | *\`* | *\\*) ac_try_echo=\$ac_try;;
- *) ac_try_echo=$ac_try;;
-esac
-eval ac_try_echo="\"\$as_me:$LINENO: $ac_try_echo\""
-$as_echo "$ac_try_echo") >&5
- (eval "$ac_compile") 2>conftest.er1
- ac_status=$?
- grep -v '^ *+' conftest.er1 >conftest.err
- rm -f conftest.er1
- cat conftest.err >&5
- $as_echo "$as_me:$LINENO: \$? = $ac_status" >&5
- (exit $ac_status); } && {
- test -z "$ac_c_werror_flag" ||
- test ! -s conftest.err
- } && test -s conftest.$ac_objext; then
- case $ac_type in
- uint8_t) ac_cv_c_uint8_t=yes ;;
- *) ac_cv_c_uint8_t=$ac_type ;;
-esac
-
-else
- $as_echo "$as_me: failed program was:" >&5
-sed 's/^/| /' conftest.$ac_ext >&5
-
-
-fi
-
-rm -f core conftest.err conftest.$ac_objext conftest.$ac_ext
- test "$ac_cv_c_uint8_t" != no && break
- done
-fi
-{ $as_echo "$as_me:$LINENO: result: $ac_cv_c_uint8_t" >&5
-$as_echo "$ac_cv_c_uint8_t" >&6; }
- case $ac_cv_c_uint8_t in #(
- no|yes) ;; #(
- *)
-
-cat >>confdefs.h <<\_ACEOF
-#define _UINT8_T 1
-_ACEOF
-
-
-cat >>confdefs.h <<_ACEOF
-#define uint8_t $ac_cv_c_uint8_t
-_ACEOF
-;;
- esac
-
-
- { $as_echo "$as_me:$LINENO: checking for uint16_t" >&5
-$as_echo_n "checking for uint16_t... " >&6; }
-if test "${ac_cv_c_uint16_t+set}" = set; then
- $as_echo_n "(cached) " >&6
-else
- ac_cv_c_uint16_t=no
- for ac_type in 'uint16_t' 'unsigned int' 'unsigned long int' \
- 'unsigned long long int' 'unsigned short int' 'unsigned char'; do
- cat >conftest.$ac_ext <<_ACEOF
-/* confdefs.h. */
-_ACEOF
-cat confdefs.h >>conftest.$ac_ext
-cat >>conftest.$ac_ext <<_ACEOF
-/* end confdefs.h. */
-$ac_includes_default
-int
-main ()
-{
-static int test_array [1 - 2 * !(($ac_type) -1 >> (16 - 1) == 1)];
-test_array [0] = 0
-
- ;
- return 0;
-}
-_ACEOF
-rm -f conftest.$ac_objext
-if { (ac_try="$ac_compile"
-case "(($ac_try" in
- *\"* | *\`* | *\\*) ac_try_echo=\$ac_try;;
- *) ac_try_echo=$ac_try;;
-esac
-eval ac_try_echo="\"\$as_me:$LINENO: $ac_try_echo\""
-$as_echo "$ac_try_echo") >&5
- (eval "$ac_compile") 2>conftest.er1
- ac_status=$?
- grep -v '^ *+' conftest.er1 >conftest.err
- rm -f conftest.er1
- cat conftest.err >&5
- $as_echo "$as_me:$LINENO: \$? = $ac_status" >&5
- (exit $ac_status); } && {
- test -z "$ac_c_werror_flag" ||
- test ! -s conftest.err
- } && test -s conftest.$ac_objext; then
- case $ac_type in
- uint16_t) ac_cv_c_uint16_t=yes ;;
- *) ac_cv_c_uint16_t=$ac_type ;;
-esac
-
-else
- $as_echo "$as_me: failed program was:" >&5
-sed 's/^/| /' conftest.$ac_ext >&5
-
-
-fi
-
-rm -f core conftest.err conftest.$ac_objext conftest.$ac_ext
- test "$ac_cv_c_uint16_t" != no && break
- done
-fi
-{ $as_echo "$as_me:$LINENO: result: $ac_cv_c_uint16_t" >&5
-$as_echo "$ac_cv_c_uint16_t" >&6; }
- case $ac_cv_c_uint16_t in #(
- no|yes) ;; #(
- *)
-
-
-cat >>confdefs.h <<_ACEOF
-#define uint16_t $ac_cv_c_uint16_t
-_ACEOF
-;;
- esac
-
-
- { $as_echo "$as_me:$LINENO: checking for int32_t" >&5
-$as_echo_n "checking for int32_t... " >&6; }
-if test "${ac_cv_c_int32_t+set}" = set; then
- $as_echo_n "(cached) " >&6
-else
- ac_cv_c_int32_t=no
- for ac_type in 'int32_t' 'int' 'long int' \
- 'long long int' 'short int' 'signed char'; do
- cat >conftest.$ac_ext <<_ACEOF
-/* confdefs.h. */
-_ACEOF
-cat confdefs.h >>conftest.$ac_ext
-cat >>conftest.$ac_ext <<_ACEOF
-/* end confdefs.h. */
-$ac_includes_default
-int
-main ()
-{
-static int test_array [1 - 2 * !(0 < ($ac_type) (((($ac_type) 1 << (32 - 2)) - 1) * 2 + 1))];
-test_array [0] = 0
-
- ;
- return 0;
-}
-_ACEOF
-rm -f conftest.$ac_objext
-if { (ac_try="$ac_compile"
-case "(($ac_try" in
- *\"* | *\`* | *\\*) ac_try_echo=\$ac_try;;
- *) ac_try_echo=$ac_try;;
-esac
-eval ac_try_echo="\"\$as_me:$LINENO: $ac_try_echo\""
-$as_echo "$ac_try_echo") >&5
- (eval "$ac_compile") 2>conftest.er1
- ac_status=$?
- grep -v '^ *+' conftest.er1 >conftest.err
- rm -f conftest.er1
- cat conftest.err >&5
- $as_echo "$as_me:$LINENO: \$? = $ac_status" >&5
- (exit $ac_status); } && {
- test -z "$ac_c_werror_flag" ||
- test ! -s conftest.err
- } && test -s conftest.$ac_objext; then
- cat >conftest.$ac_ext <<_ACEOF
-/* confdefs.h. */
-_ACEOF
-cat confdefs.h >>conftest.$ac_ext
-cat >>conftest.$ac_ext <<_ACEOF
-/* end confdefs.h. */
-$ac_includes_default
-int
-main ()
-{
-static int test_array [1 - 2 * !(($ac_type) (((($ac_type) 1 << (32 - 2)) - 1) * 2 + 1)
- < ($ac_type) (((($ac_type) 1 << (32 - 2)) - 1) * 2 + 2))];
-test_array [0] = 0
-
- ;
- return 0;
-}
-_ACEOF
-rm -f conftest.$ac_objext
-if { (ac_try="$ac_compile"
-case "(($ac_try" in
- *\"* | *\`* | *\\*) ac_try_echo=\$ac_try;;
- *) ac_try_echo=$ac_try;;
-esac
-eval ac_try_echo="\"\$as_me:$LINENO: $ac_try_echo\""
-$as_echo "$ac_try_echo") >&5
- (eval "$ac_compile") 2>conftest.er1
- ac_status=$?
- grep -v '^ *+' conftest.er1 >conftest.err
- rm -f conftest.er1
- cat conftest.err >&5
- $as_echo "$as_me:$LINENO: \$? = $ac_status" >&5
- (exit $ac_status); } && {
- test -z "$ac_c_werror_flag" ||
- test ! -s conftest.err
- } && test -s conftest.$ac_objext; then
- :
-else
- $as_echo "$as_me: failed program was:" >&5
-sed 's/^/| /' conftest.$ac_ext >&5
-
- case $ac_type in
- int32_t) ac_cv_c_int32_t=yes ;;
- *) ac_cv_c_int32_t=$ac_type ;;
-esac
-
-fi
-
-rm -f core conftest.err conftest.$ac_objext conftest.$ac_ext
-else
- $as_echo "$as_me: failed program was:" >&5
-sed 's/^/| /' conftest.$ac_ext >&5
-
-
-fi
-
-rm -f core conftest.err conftest.$ac_objext conftest.$ac_ext
- test "$ac_cv_c_int32_t" != no && break
- done
-fi
-{ $as_echo "$as_me:$LINENO: result: $ac_cv_c_int32_t" >&5
-$as_echo "$ac_cv_c_int32_t" >&6; }
- case $ac_cv_c_int32_t in #(
- no|yes) ;; #(
- *)
-
-cat >>confdefs.h <<_ACEOF
-#define int32_t $ac_cv_c_int32_t
-_ACEOF
-;;
- esac
-
-
- { $as_echo "$as_me:$LINENO: checking for uint32_t" >&5
-$as_echo_n "checking for uint32_t... " >&6; }
-if test "${ac_cv_c_uint32_t+set}" = set; then
- $as_echo_n "(cached) " >&6
-else
- ac_cv_c_uint32_t=no
- for ac_type in 'uint32_t' 'unsigned int' 'unsigned long int' \
- 'unsigned long long int' 'unsigned short int' 'unsigned char'; do
- cat >conftest.$ac_ext <<_ACEOF
-/* confdefs.h. */
-_ACEOF
-cat confdefs.h >>conftest.$ac_ext
-cat >>conftest.$ac_ext <<_ACEOF
-/* end confdefs.h. */
-$ac_includes_default
-int
-main ()
-{
-static int test_array [1 - 2 * !(($ac_type) -1 >> (32 - 1) == 1)];
-test_array [0] = 0
-
- ;
- return 0;
-}
-_ACEOF
-rm -f conftest.$ac_objext
-if { (ac_try="$ac_compile"
-case "(($ac_try" in
- *\"* | *\`* | *\\*) ac_try_echo=\$ac_try;;
- *) ac_try_echo=$ac_try;;
-esac
-eval ac_try_echo="\"\$as_me:$LINENO: $ac_try_echo\""
-$as_echo "$ac_try_echo") >&5
- (eval "$ac_compile") 2>conftest.er1
- ac_status=$?
- grep -v '^ *+' conftest.er1 >conftest.err
- rm -f conftest.er1
- cat conftest.err >&5
- $as_echo "$as_me:$LINENO: \$? = $ac_status" >&5
- (exit $ac_status); } && {
- test -z "$ac_c_werror_flag" ||
- test ! -s conftest.err
- } && test -s conftest.$ac_objext; then
- case $ac_type in
- uint32_t) ac_cv_c_uint32_t=yes ;;
- *) ac_cv_c_uint32_t=$ac_type ;;
-esac
-
-else
- $as_echo "$as_me: failed program was:" >&5
-sed 's/^/| /' conftest.$ac_ext >&5
-
-
-fi
-
-rm -f core conftest.err conftest.$ac_objext conftest.$ac_ext
- test "$ac_cv_c_uint32_t" != no && break
- done
-fi
-{ $as_echo "$as_me:$LINENO: result: $ac_cv_c_uint32_t" >&5
-$as_echo "$ac_cv_c_uint32_t" >&6; }
- case $ac_cv_c_uint32_t in #(
- no|yes) ;; #(
- *)
-
-cat >>confdefs.h <<\_ACEOF
-#define _UINT32_T 1
-_ACEOF
-
-
-cat >>confdefs.h <<_ACEOF
-#define uint32_t $ac_cv_c_uint32_t
-_ACEOF
-;;
- esac
-
-
- { $as_echo "$as_me:$LINENO: checking for int64_t" >&5
-$as_echo_n "checking for int64_t... " >&6; }
-if test "${ac_cv_c_int64_t+set}" = set; then
- $as_echo_n "(cached) " >&6
-else
- ac_cv_c_int64_t=no
- for ac_type in 'int64_t' 'int' 'long int' \
- 'long long int' 'short int' 'signed char'; do
- cat >conftest.$ac_ext <<_ACEOF
-/* confdefs.h. */
-_ACEOF
-cat confdefs.h >>conftest.$ac_ext
-cat >>conftest.$ac_ext <<_ACEOF
-/* end confdefs.h. */
-$ac_includes_default
-int
-main ()
-{
-static int test_array [1 - 2 * !(0 < ($ac_type) (((($ac_type) 1 << (64 - 2)) - 1) * 2 + 1))];
-test_array [0] = 0
-
- ;
- return 0;
-}
-_ACEOF
-rm -f conftest.$ac_objext
-if { (ac_try="$ac_compile"
-case "(($ac_try" in
- *\"* | *\`* | *\\*) ac_try_echo=\$ac_try;;
- *) ac_try_echo=$ac_try;;
-esac
-eval ac_try_echo="\"\$as_me:$LINENO: $ac_try_echo\""
-$as_echo "$ac_try_echo") >&5
- (eval "$ac_compile") 2>conftest.er1
- ac_status=$?
- grep -v '^ *+' conftest.er1 >conftest.err
- rm -f conftest.er1
- cat conftest.err >&5
- $as_echo "$as_me:$LINENO: \$? = $ac_status" >&5
- (exit $ac_status); } && {
- test -z "$ac_c_werror_flag" ||
- test ! -s conftest.err
- } && test -s conftest.$ac_objext; then
- cat >conftest.$ac_ext <<_ACEOF
-/* confdefs.h. */
-_ACEOF
-cat confdefs.h >>conftest.$ac_ext
-cat >>conftest.$ac_ext <<_ACEOF
-/* end confdefs.h. */
-$ac_includes_default
-int
-main ()
-{
-static int test_array [1 - 2 * !(($ac_type) (((($ac_type) 1 << (64 - 2)) - 1) * 2 + 1)
- < ($ac_type) (((($ac_type) 1 << (64 - 2)) - 1) * 2 + 2))];
-test_array [0] = 0
-
- ;
- return 0;
-}
-_ACEOF
-rm -f conftest.$ac_objext
-if { (ac_try="$ac_compile"
-case "(($ac_try" in
- *\"* | *\`* | *\\*) ac_try_echo=\$ac_try;;
- *) ac_try_echo=$ac_try;;
-esac
-eval ac_try_echo="\"\$as_me:$LINENO: $ac_try_echo\""
-$as_echo "$ac_try_echo") >&5
- (eval "$ac_compile") 2>conftest.er1
- ac_status=$?
- grep -v '^ *+' conftest.er1 >conftest.err
- rm -f conftest.er1
- cat conftest.err >&5
- $as_echo "$as_me:$LINENO: \$? = $ac_status" >&5
- (exit $ac_status); } && {
- test -z "$ac_c_werror_flag" ||
- test ! -s conftest.err
- } && test -s conftest.$ac_objext; then
- :
-else
- $as_echo "$as_me: failed program was:" >&5
-sed 's/^/| /' conftest.$ac_ext >&5
-
- case $ac_type in
- int64_t) ac_cv_c_int64_t=yes ;;
- *) ac_cv_c_int64_t=$ac_type ;;
-esac
-
-fi
-
-rm -f core conftest.err conftest.$ac_objext conftest.$ac_ext
-else
- $as_echo "$as_me: failed program was:" >&5
-sed 's/^/| /' conftest.$ac_ext >&5
-
-
-fi
-
-rm -f core conftest.err conftest.$ac_objext conftest.$ac_ext
- test "$ac_cv_c_int64_t" != no && break
- done
-fi
-{ $as_echo "$as_me:$LINENO: result: $ac_cv_c_int64_t" >&5
-$as_echo "$ac_cv_c_int64_t" >&6; }
- case $ac_cv_c_int64_t in #(
- no|yes) ;; #(
- *)
-
-cat >>confdefs.h <<_ACEOF
-#define int64_t $ac_cv_c_int64_t
-_ACEOF
-;;
- esac
-
-
- { $as_echo "$as_me:$LINENO: checking for uint64_t" >&5
-$as_echo_n "checking for uint64_t... " >&6; }
-if test "${ac_cv_c_uint64_t+set}" = set; then
- $as_echo_n "(cached) " >&6
-else
- ac_cv_c_uint64_t=no
- for ac_type in 'uint64_t' 'unsigned int' 'unsigned long int' \
- 'unsigned long long int' 'unsigned short int' 'unsigned char'; do
- cat >conftest.$ac_ext <<_ACEOF
-/* confdefs.h. */
-_ACEOF
-cat confdefs.h >>conftest.$ac_ext
-cat >>conftest.$ac_ext <<_ACEOF
-/* end confdefs.h. */
-$ac_includes_default
-int
-main ()
-{
-static int test_array [1 - 2 * !(($ac_type) -1 >> (64 - 1) == 1)];
-test_array [0] = 0
-
- ;
- return 0;
-}
-_ACEOF
-rm -f conftest.$ac_objext
-if { (ac_try="$ac_compile"
-case "(($ac_try" in
- *\"* | *\`* | *\\*) ac_try_echo=\$ac_try;;
- *) ac_try_echo=$ac_try;;
-esac
-eval ac_try_echo="\"\$as_me:$LINENO: $ac_try_echo\""
-$as_echo "$ac_try_echo") >&5
- (eval "$ac_compile") 2>conftest.er1
- ac_status=$?
- grep -v '^ *+' conftest.er1 >conftest.err
- rm -f conftest.er1
- cat conftest.err >&5
- $as_echo "$as_me:$LINENO: \$? = $ac_status" >&5
- (exit $ac_status); } && {
- test -z "$ac_c_werror_flag" ||
- test ! -s conftest.err
- } && test -s conftest.$ac_objext; then
- case $ac_type in
- uint64_t) ac_cv_c_uint64_t=yes ;;
- *) ac_cv_c_uint64_t=$ac_type ;;
-esac
-
-else
- $as_echo "$as_me: failed program was:" >&5
-sed 's/^/| /' conftest.$ac_ext >&5
-
-
-fi
-
-rm -f core conftest.err conftest.$ac_objext conftest.$ac_ext
- test "$ac_cv_c_uint64_t" != no && break
- done
-fi
-{ $as_echo "$as_me:$LINENO: result: $ac_cv_c_uint64_t" >&5
-$as_echo "$ac_cv_c_uint64_t" >&6; }
- case $ac_cv_c_uint64_t in #(
- no|yes) ;; #(
- *)
-
-cat >>confdefs.h <<\_ACEOF
-#define _UINT64_T 1
-_ACEOF
-
-
-cat >>confdefs.h <<_ACEOF
-#define uint64_t $ac_cv_c_uint64_t
-_ACEOF
-;;
- esac
-
-
- { $as_echo "$as_me:$LINENO: checking for uintptr_t" >&5
-$as_echo_n "checking for uintptr_t... " >&6; }
-if test "${ac_cv_type_uintptr_t+set}" = set; then
- $as_echo_n "(cached) " >&6
-else
- ac_cv_type_uintptr_t=no
-cat >conftest.$ac_ext <<_ACEOF
-/* confdefs.h. */
-_ACEOF
-cat confdefs.h >>conftest.$ac_ext
-cat >>conftest.$ac_ext <<_ACEOF
-/* end confdefs.h. */
-$ac_includes_default
-int
-main ()
-{
-if (sizeof (uintptr_t))
- return 0;
- ;
- return 0;
-}
-_ACEOF
-rm -f conftest.$ac_objext
-if { (ac_try="$ac_compile"
-case "(($ac_try" in
- *\"* | *\`* | *\\*) ac_try_echo=\$ac_try;;
- *) ac_try_echo=$ac_try;;
-esac
-eval ac_try_echo="\"\$as_me:$LINENO: $ac_try_echo\""
-$as_echo "$ac_try_echo") >&5
- (eval "$ac_compile") 2>conftest.er1
- ac_status=$?
- grep -v '^ *+' conftest.er1 >conftest.err
- rm -f conftest.er1
- cat conftest.err >&5
- $as_echo "$as_me:$LINENO: \$? = $ac_status" >&5
- (exit $ac_status); } && {
- test -z "$ac_c_werror_flag" ||
- test ! -s conftest.err
- } && test -s conftest.$ac_objext; then
- cat >conftest.$ac_ext <<_ACEOF
-/* confdefs.h. */
-_ACEOF
-cat confdefs.h >>conftest.$ac_ext
-cat >>conftest.$ac_ext <<_ACEOF
-/* end confdefs.h. */
-$ac_includes_default
-int
-main ()
-{
-if (sizeof ((uintptr_t)))
- return 0;
- ;
- return 0;
-}
-_ACEOF
-rm -f conftest.$ac_objext
-if { (ac_try="$ac_compile"
-case "(($ac_try" in
- *\"* | *\`* | *\\*) ac_try_echo=\$ac_try;;
- *) ac_try_echo=$ac_try;;
-esac
-eval ac_try_echo="\"\$as_me:$LINENO: $ac_try_echo\""
-$as_echo "$ac_try_echo") >&5
- (eval "$ac_compile") 2>conftest.er1
- ac_status=$?
- grep -v '^ *+' conftest.er1 >conftest.err
- rm -f conftest.er1
- cat conftest.err >&5
- $as_echo "$as_me:$LINENO: \$? = $ac_status" >&5
- (exit $ac_status); } && {
- test -z "$ac_c_werror_flag" ||
- test ! -s conftest.err
- } && test -s conftest.$ac_objext; then
- :
-else
- $as_echo "$as_me: failed program was:" >&5
-sed 's/^/| /' conftest.$ac_ext >&5
-
- ac_cv_type_uintptr_t=yes
-fi
-
-rm -f core conftest.err conftest.$ac_objext conftest.$ac_ext
-else
- $as_echo "$as_me: failed program was:" >&5
-sed 's/^/| /' conftest.$ac_ext >&5
-
-
-fi
-
-rm -f core conftest.err conftest.$ac_objext conftest.$ac_ext
-fi
-{ $as_echo "$as_me:$LINENO: result: $ac_cv_type_uintptr_t" >&5
-$as_echo "$ac_cv_type_uintptr_t" >&6; }
-if test $ac_cv_type_uintptr_t = yes; then
-
-cat >>confdefs.h <<\_ACEOF
-#define HAVE_UINTPTR_T 1
-_ACEOF
-
-else
- for ac_type in 'unsigned int' 'unsigned long int' \
- 'unsigned long long int'; do
- cat >conftest.$ac_ext <<_ACEOF
-/* confdefs.h. */
-_ACEOF
-cat confdefs.h >>conftest.$ac_ext
-cat >>conftest.$ac_ext <<_ACEOF
-/* end confdefs.h. */
-$ac_includes_default
-int
-main ()
-{
-static int test_array [1 - 2 * !(sizeof (void *) <= sizeof ($ac_type))];
-test_array [0] = 0
-
- ;
- return 0;
-}
-_ACEOF
-rm -f conftest.$ac_objext
-if { (ac_try="$ac_compile"
-case "(($ac_try" in
- *\"* | *\`* | *\\*) ac_try_echo=\$ac_try;;
- *) ac_try_echo=$ac_try;;
-esac
-eval ac_try_echo="\"\$as_me:$LINENO: $ac_try_echo\""
-$as_echo "$ac_try_echo") >&5
- (eval "$ac_compile") 2>conftest.er1
- ac_status=$?
- grep -v '^ *+' conftest.er1 >conftest.err
- rm -f conftest.er1
- cat conftest.err >&5
- $as_echo "$as_me:$LINENO: \$? = $ac_status" >&5
- (exit $ac_status); } && {
- test -z "$ac_c_werror_flag" ||
- test ! -s conftest.err
- } && test -s conftest.$ac_objext; then
-
-cat >>confdefs.h <<_ACEOF
-#define uintptr_t $ac_type
-_ACEOF
-
- ac_type=
-else
- $as_echo "$as_me: failed program was:" >&5
-sed 's/^/| /' conftest.$ac_ext >&5
-
-
-fi
-
-rm -f core conftest.err conftest.$ac_objext conftest.$ac_ext
- test -z "$ac_type" && break
- done
-fi
-
-
-
-# The cast to long int works around a bug in the HP C Compiler
-# version HP92453-01 B.11.11.23709.GP, which incorrectly rejects
-# declarations like `int a3[[(sizeof (unsigned char)) >= 0]];'.
-# This bug is HP SR number 8606223364.
-{ $as_echo "$as_me:$LINENO: checking size of size_t" >&5
-$as_echo_n "checking size of size_t... " >&6; }
-if test "${ac_cv_sizeof_size_t+set}" = set; then
- $as_echo_n "(cached) " >&6
-else
- if test "$cross_compiling" = yes; then
- # Depending upon the size, compute the lo and hi bounds.
-cat >conftest.$ac_ext <<_ACEOF
-/* confdefs.h. */
-_ACEOF
-cat confdefs.h >>conftest.$ac_ext
-cat >>conftest.$ac_ext <<_ACEOF
-/* end confdefs.h. */
-$ac_includes_default
-int
-main ()
-{
-static int test_array [1 - 2 * !(((long int) (sizeof (size_t))) >= 0)];
-test_array [0] = 0
-
- ;
- return 0;
-}
-_ACEOF
-rm -f conftest.$ac_objext
-if { (ac_try="$ac_compile"
-case "(($ac_try" in
- *\"* | *\`* | *\\*) ac_try_echo=\$ac_try;;
- *) ac_try_echo=$ac_try;;
-esac
-eval ac_try_echo="\"\$as_me:$LINENO: $ac_try_echo\""
-$as_echo "$ac_try_echo") >&5
- (eval "$ac_compile") 2>conftest.er1
- ac_status=$?
- grep -v '^ *+' conftest.er1 >conftest.err
- rm -f conftest.er1
- cat conftest.err >&5
- $as_echo "$as_me:$LINENO: \$? = $ac_status" >&5
- (exit $ac_status); } && {
- test -z "$ac_c_werror_flag" ||
- test ! -s conftest.err
- } && test -s conftest.$ac_objext; then
- ac_lo=0 ac_mid=0
- while :; do
- cat >conftest.$ac_ext <<_ACEOF
-/* confdefs.h. */
-_ACEOF
-cat confdefs.h >>conftest.$ac_ext
-cat >>conftest.$ac_ext <<_ACEOF
-/* end confdefs.h. */
-$ac_includes_default
-int
-main ()
-{
-static int test_array [1 - 2 * !(((long int) (sizeof (size_t))) <= $ac_mid)];
-test_array [0] = 0
-
- ;
- return 0;
-}
-_ACEOF
-rm -f conftest.$ac_objext
-if { (ac_try="$ac_compile"
-case "(($ac_try" in
- *\"* | *\`* | *\\*) ac_try_echo=\$ac_try;;
- *) ac_try_echo=$ac_try;;
-esac
-eval ac_try_echo="\"\$as_me:$LINENO: $ac_try_echo\""
-$as_echo "$ac_try_echo") >&5
- (eval "$ac_compile") 2>conftest.er1
- ac_status=$?
- grep -v '^ *+' conftest.er1 >conftest.err
- rm -f conftest.er1
- cat conftest.err >&5
- $as_echo "$as_me:$LINENO: \$? = $ac_status" >&5
- (exit $ac_status); } && {
- test -z "$ac_c_werror_flag" ||
- test ! -s conftest.err
- } && test -s conftest.$ac_objext; then
- ac_hi=$ac_mid; break
-else
- $as_echo "$as_me: failed program was:" >&5
-sed 's/^/| /' conftest.$ac_ext >&5
-
- ac_lo=`expr $ac_mid + 1`
- if test $ac_lo -le $ac_mid; then
- ac_lo= ac_hi=
- break
- fi
- ac_mid=`expr 2 '*' $ac_mid + 1`
-fi
-
-rm -f core conftest.err conftest.$ac_objext conftest.$ac_ext
- done
-else
- $as_echo "$as_me: failed program was:" >&5
-sed 's/^/| /' conftest.$ac_ext >&5
-
- cat >conftest.$ac_ext <<_ACEOF
-/* confdefs.h. */
-_ACEOF
-cat confdefs.h >>conftest.$ac_ext
-cat >>conftest.$ac_ext <<_ACEOF
-/* end confdefs.h. */
-$ac_includes_default
-int
-main ()
-{
-static int test_array [1 - 2 * !(((long int) (sizeof (size_t))) < 0)];
-test_array [0] = 0
-
- ;
- return 0;
-}
-_ACEOF
-rm -f conftest.$ac_objext
-if { (ac_try="$ac_compile"
-case "(($ac_try" in
- *\"* | *\`* | *\\*) ac_try_echo=\$ac_try;;
- *) ac_try_echo=$ac_try;;
-esac
-eval ac_try_echo="\"\$as_me:$LINENO: $ac_try_echo\""
-$as_echo "$ac_try_echo") >&5
- (eval "$ac_compile") 2>conftest.er1
- ac_status=$?
- grep -v '^ *+' conftest.er1 >conftest.err
- rm -f conftest.er1
- cat conftest.err >&5
- $as_echo "$as_me:$LINENO: \$? = $ac_status" >&5
- (exit $ac_status); } && {
- test -z "$ac_c_werror_flag" ||
- test ! -s conftest.err
- } && test -s conftest.$ac_objext; then
- ac_hi=-1 ac_mid=-1
- while :; do
- cat >conftest.$ac_ext <<_ACEOF
-/* confdefs.h. */
-_ACEOF
-cat confdefs.h >>conftest.$ac_ext
-cat >>conftest.$ac_ext <<_ACEOF
-/* end confdefs.h. */
-$ac_includes_default
-int
-main ()
-{
-static int test_array [1 - 2 * !(((long int) (sizeof (size_t))) >= $ac_mid)];
-test_array [0] = 0
-
- ;
- return 0;
-}
-_ACEOF
-rm -f conftest.$ac_objext
-if { (ac_try="$ac_compile"
-case "(($ac_try" in
- *\"* | *\`* | *\\*) ac_try_echo=\$ac_try;;
- *) ac_try_echo=$ac_try;;
-esac
-eval ac_try_echo="\"\$as_me:$LINENO: $ac_try_echo\""
-$as_echo "$ac_try_echo") >&5
- (eval "$ac_compile") 2>conftest.er1
- ac_status=$?
- grep -v '^ *+' conftest.er1 >conftest.err
- rm -f conftest.er1
- cat conftest.err >&5
- $as_echo "$as_me:$LINENO: \$? = $ac_status" >&5
- (exit $ac_status); } && {
- test -z "$ac_c_werror_flag" ||
- test ! -s conftest.err
- } && test -s conftest.$ac_objext; then
- ac_lo=$ac_mid; break
-else
- $as_echo "$as_me: failed program was:" >&5
-sed 's/^/| /' conftest.$ac_ext >&5
-
- ac_hi=`expr '(' $ac_mid ')' - 1`
- if test $ac_mid -le $ac_hi; then
- ac_lo= ac_hi=
- break
- fi
- ac_mid=`expr 2 '*' $ac_mid`
-fi
-
-rm -f core conftest.err conftest.$ac_objext conftest.$ac_ext
- done
-else
- $as_echo "$as_me: failed program was:" >&5
-sed 's/^/| /' conftest.$ac_ext >&5
-
- ac_lo= ac_hi=
-fi
-
-rm -f core conftest.err conftest.$ac_objext conftest.$ac_ext
-fi
-
-rm -f core conftest.err conftest.$ac_objext conftest.$ac_ext
-# Binary search between lo and hi bounds.
-while test "x$ac_lo" != "x$ac_hi"; do
- ac_mid=`expr '(' $ac_hi - $ac_lo ')' / 2 + $ac_lo`
- cat >conftest.$ac_ext <<_ACEOF
-/* confdefs.h. */
-_ACEOF
-cat confdefs.h >>conftest.$ac_ext
-cat >>conftest.$ac_ext <<_ACEOF
-/* end confdefs.h. */
-$ac_includes_default
-int
-main ()
-{
-static int test_array [1 - 2 * !(((long int) (sizeof (size_t))) <= $ac_mid)];
-test_array [0] = 0
-
- ;
- return 0;
-}
-_ACEOF
-rm -f conftest.$ac_objext
-if { (ac_try="$ac_compile"
-case "(($ac_try" in
- *\"* | *\`* | *\\*) ac_try_echo=\$ac_try;;
- *) ac_try_echo=$ac_try;;
-esac
-eval ac_try_echo="\"\$as_me:$LINENO: $ac_try_echo\""
-$as_echo "$ac_try_echo") >&5
- (eval "$ac_compile") 2>conftest.er1
- ac_status=$?
- grep -v '^ *+' conftest.er1 >conftest.err
- rm -f conftest.er1
- cat conftest.err >&5
- $as_echo "$as_me:$LINENO: \$? = $ac_status" >&5
- (exit $ac_status); } && {
- test -z "$ac_c_werror_flag" ||
- test ! -s conftest.err
- } && test -s conftest.$ac_objext; then
- ac_hi=$ac_mid
-else
- $as_echo "$as_me: failed program was:" >&5
-sed 's/^/| /' conftest.$ac_ext >&5
-
- ac_lo=`expr '(' $ac_mid ')' + 1`
-fi
-
-rm -f core conftest.err conftest.$ac_objext conftest.$ac_ext
-done
-case $ac_lo in
-?*) ac_cv_sizeof_size_t=$ac_lo;;
-'') if test "$ac_cv_type_size_t" = yes; then
- { { $as_echo "$as_me:$LINENO: error: cannot compute sizeof (size_t)
-See \`config.log' for more details." >&5
-$as_echo "$as_me: error: cannot compute sizeof (size_t)
-See \`config.log' for more details." >&2;}
- { (exit 77); exit 77; }; }
- else
- ac_cv_sizeof_size_t=0
- fi ;;
-esac
-else
- cat >conftest.$ac_ext <<_ACEOF
-/* confdefs.h. */
-_ACEOF
-cat confdefs.h >>conftest.$ac_ext
-cat >>conftest.$ac_ext <<_ACEOF
-/* end confdefs.h. */
-$ac_includes_default
-static long int longval () { return (long int) (sizeof (size_t)); }
-static unsigned long int ulongval () { return (long int) (sizeof (size_t)); }
-#include <stdio.h>
-#include <stdlib.h>
-int
-main ()
-{
-
- FILE *f = fopen ("conftest.val", "w");
- if (! f)
- return 1;
- if (((long int) (sizeof (size_t))) < 0)
- {
- long int i = longval ();
- if (i != ((long int) (sizeof (size_t))))
- return 1;
- fprintf (f, "%ld", i);
- }
- else
- {
- unsigned long int i = ulongval ();
- if (i != ((long int) (sizeof (size_t))))
- return 1;
- fprintf (f, "%lu", i);
- }
- /* Do not output a trailing newline, as this causes \r\n confusion
- on some platforms. */
- return ferror (f) || fclose (f) != 0;
-
- ;
- return 0;
-}
-_ACEOF
-rm -f conftest$ac_exeext
-if { (ac_try="$ac_link"
-case "(($ac_try" in
- *\"* | *\`* | *\\*) ac_try_echo=\$ac_try;;
- *) ac_try_echo=$ac_try;;
-esac
-eval ac_try_echo="\"\$as_me:$LINENO: $ac_try_echo\""
-$as_echo "$ac_try_echo") >&5
- (eval "$ac_link") 2>&5
- ac_status=$?
- $as_echo "$as_me:$LINENO: \$? = $ac_status" >&5
- (exit $ac_status); } && { ac_try='./conftest$ac_exeext'
- { (case "(($ac_try" in
- *\"* | *\`* | *\\*) ac_try_echo=\$ac_try;;
- *) ac_try_echo=$ac_try;;
-esac
-eval ac_try_echo="\"\$as_me:$LINENO: $ac_try_echo\""
-$as_echo "$ac_try_echo") >&5
- (eval "$ac_try") 2>&5
- ac_status=$?
- $as_echo "$as_me:$LINENO: \$? = $ac_status" >&5
- (exit $ac_status); }; }; then
- ac_cv_sizeof_size_t=`cat conftest.val`
-else
- $as_echo "$as_me: program exited with status $ac_status" >&5
-$as_echo "$as_me: failed program was:" >&5
-sed 's/^/| /' conftest.$ac_ext >&5
-
-( exit $ac_status )
-if test "$ac_cv_type_size_t" = yes; then
- { { $as_echo "$as_me:$LINENO: error: cannot compute sizeof (size_t)
-See \`config.log' for more details." >&5
-$as_echo "$as_me: error: cannot compute sizeof (size_t)
-See \`config.log' for more details." >&2;}
- { (exit 77); exit 77; }; }
- else
- ac_cv_sizeof_size_t=0
- fi
-fi
-rm -rf conftest.dSYM
-rm -f core *.core core.conftest.* gmon.out bb.out conftest$ac_exeext conftest.$ac_objext conftest.$ac_ext
-fi
-rm -f conftest.val
-fi
-{ $as_echo "$as_me:$LINENO: result: $ac_cv_sizeof_size_t" >&5
-$as_echo "$ac_cv_sizeof_size_t" >&6; }
-
-
-
-cat >>confdefs.h <<_ACEOF
-#define SIZEOF_SIZE_T $ac_cv_sizeof_size_t
-_ACEOF
-
-
-
-# The command line tool can copy high resolution timestamps if such
-# information is availabe in struct stat. Otherwise one second accuracy
-# is used.
-{ $as_echo "$as_me:$LINENO: checking for struct stat.st_atim.tv_nsec" >&5
-$as_echo_n "checking for struct stat.st_atim.tv_nsec... " >&6; }
-if test "${ac_cv_member_struct_stat_st_atim_tv_nsec+set}" = set; then
- $as_echo_n "(cached) " >&6
-else
- cat >conftest.$ac_ext <<_ACEOF
-/* confdefs.h. */
-_ACEOF
-cat confdefs.h >>conftest.$ac_ext
-cat >>conftest.$ac_ext <<_ACEOF
-/* end confdefs.h. */
-$ac_includes_default
-int
-main ()
-{
-static struct stat ac_aggr;
-if (ac_aggr.st_atim.tv_nsec)
-return 0;
- ;
- return 0;
-}
-_ACEOF
-rm -f conftest.$ac_objext
-if { (ac_try="$ac_compile"
-case "(($ac_try" in
- *\"* | *\`* | *\\*) ac_try_echo=\$ac_try;;
- *) ac_try_echo=$ac_try;;
-esac
-eval ac_try_echo="\"\$as_me:$LINENO: $ac_try_echo\""
-$as_echo "$ac_try_echo") >&5
- (eval "$ac_compile") 2>conftest.er1
- ac_status=$?
- grep -v '^ *+' conftest.er1 >conftest.err
- rm -f conftest.er1
- cat conftest.err >&5
- $as_echo "$as_me:$LINENO: \$? = $ac_status" >&5
- (exit $ac_status); } && {
- test -z "$ac_c_werror_flag" ||
- test ! -s conftest.err
- } && test -s conftest.$ac_objext; then
- ac_cv_member_struct_stat_st_atim_tv_nsec=yes
-else
- $as_echo "$as_me: failed program was:" >&5
-sed 's/^/| /' conftest.$ac_ext >&5
-
- cat >conftest.$ac_ext <<_ACEOF
-/* confdefs.h. */
-_ACEOF
-cat confdefs.h >>conftest.$ac_ext
-cat >>conftest.$ac_ext <<_ACEOF
-/* end confdefs.h. */
-$ac_includes_default
-int
-main ()
-{
-static struct stat ac_aggr;
-if (sizeof ac_aggr.st_atim.tv_nsec)
-return 0;
- ;
- return 0;
-}
-_ACEOF
-rm -f conftest.$ac_objext
-if { (ac_try="$ac_compile"
-case "(($ac_try" in
- *\"* | *\`* | *\\*) ac_try_echo=\$ac_try;;
- *) ac_try_echo=$ac_try;;
-esac
-eval ac_try_echo="\"\$as_me:$LINENO: $ac_try_echo\""
-$as_echo "$ac_try_echo") >&5
- (eval "$ac_compile") 2>conftest.er1
- ac_status=$?
- grep -v '^ *+' conftest.er1 >conftest.err
- rm -f conftest.er1
- cat conftest.err >&5
- $as_echo "$as_me:$LINENO: \$? = $ac_status" >&5
- (exit $ac_status); } && {
- test -z "$ac_c_werror_flag" ||
- test ! -s conftest.err
- } && test -s conftest.$ac_objext; then
- ac_cv_member_struct_stat_st_atim_tv_nsec=yes
-else
- $as_echo "$as_me: failed program was:" >&5
-sed 's/^/| /' conftest.$ac_ext >&5
-
- ac_cv_member_struct_stat_st_atim_tv_nsec=no
-fi
-
-rm -f core conftest.err conftest.$ac_objext conftest.$ac_ext
-fi
-
-rm -f core conftest.err conftest.$ac_objext conftest.$ac_ext
-fi
-{ $as_echo "$as_me:$LINENO: result: $ac_cv_member_struct_stat_st_atim_tv_nsec" >&5
-$as_echo "$ac_cv_member_struct_stat_st_atim_tv_nsec" >&6; }
-if test $ac_cv_member_struct_stat_st_atim_tv_nsec = yes; then
-
-cat >>confdefs.h <<_ACEOF
-#define HAVE_STRUCT_STAT_ST_ATIM_TV_NSEC 1
-_ACEOF
-
-
-fi
-{ $as_echo "$as_me:$LINENO: checking for struct stat.st_atimespec.tv_nsec" >&5
-$as_echo_n "checking for struct stat.st_atimespec.tv_nsec... " >&6; }
-if test "${ac_cv_member_struct_stat_st_atimespec_tv_nsec+set}" = set; then
- $as_echo_n "(cached) " >&6
-else
- cat >conftest.$ac_ext <<_ACEOF
-/* confdefs.h. */
-_ACEOF
-cat confdefs.h >>conftest.$ac_ext
-cat >>conftest.$ac_ext <<_ACEOF
-/* end confdefs.h. */
-$ac_includes_default
-int
-main ()
-{
-static struct stat ac_aggr;
-if (ac_aggr.st_atimespec.tv_nsec)
-return 0;
- ;
- return 0;
-}
-_ACEOF
-rm -f conftest.$ac_objext
-if { (ac_try="$ac_compile"
-case "(($ac_try" in
- *\"* | *\`* | *\\*) ac_try_echo=\$ac_try;;
- *) ac_try_echo=$ac_try;;
-esac
-eval ac_try_echo="\"\$as_me:$LINENO: $ac_try_echo\""
-$as_echo "$ac_try_echo") >&5
- (eval "$ac_compile") 2>conftest.er1
- ac_status=$?
- grep -v '^ *+' conftest.er1 >conftest.err
- rm -f conftest.er1
- cat conftest.err >&5
- $as_echo "$as_me:$LINENO: \$? = $ac_status" >&5
- (exit $ac_status); } && {
- test -z "$ac_c_werror_flag" ||
- test ! -s conftest.err
- } && test -s conftest.$ac_objext; then
- ac_cv_member_struct_stat_st_atimespec_tv_nsec=yes
-else
- $as_echo "$as_me: failed program was:" >&5
-sed 's/^/| /' conftest.$ac_ext >&5
-
- cat >conftest.$ac_ext <<_ACEOF
-/* confdefs.h. */
-_ACEOF
-cat confdefs.h >>conftest.$ac_ext
-cat >>conftest.$ac_ext <<_ACEOF
-/* end confdefs.h. */
-$ac_includes_default
-int
-main ()
-{
-static struct stat ac_aggr;
-if (sizeof ac_aggr.st_atimespec.tv_nsec)
-return 0;
- ;
- return 0;
-}
-_ACEOF
-rm -f conftest.$ac_objext
-if { (ac_try="$ac_compile"
-case "(($ac_try" in
- *\"* | *\`* | *\\*) ac_try_echo=\$ac_try;;
- *) ac_try_echo=$ac_try;;
-esac
-eval ac_try_echo="\"\$as_me:$LINENO: $ac_try_echo\""
-$as_echo "$ac_try_echo") >&5
- (eval "$ac_compile") 2>conftest.er1
- ac_status=$?
- grep -v '^ *+' conftest.er1 >conftest.err
- rm -f conftest.er1
- cat conftest.err >&5
- $as_echo "$as_me:$LINENO: \$? = $ac_status" >&5
- (exit $ac_status); } && {
- test -z "$ac_c_werror_flag" ||
- test ! -s conftest.err
- } && test -s conftest.$ac_objext; then
- ac_cv_member_struct_stat_st_atimespec_tv_nsec=yes
-else
- $as_echo "$as_me: failed program was:" >&5
-sed 's/^/| /' conftest.$ac_ext >&5
-
- ac_cv_member_struct_stat_st_atimespec_tv_nsec=no
-fi
-
-rm -f core conftest.err conftest.$ac_objext conftest.$ac_ext
-fi
-
-rm -f core conftest.err conftest.$ac_objext conftest.$ac_ext
-fi
-{ $as_echo "$as_me:$LINENO: result: $ac_cv_member_struct_stat_st_atimespec_tv_nsec" >&5
-$as_echo "$ac_cv_member_struct_stat_st_atimespec_tv_nsec" >&6; }
-if test $ac_cv_member_struct_stat_st_atimespec_tv_nsec = yes; then
-
-cat >>confdefs.h <<_ACEOF
-#define HAVE_STRUCT_STAT_ST_ATIMESPEC_TV_NSEC 1
-_ACEOF
-
-
-fi
-{ $as_echo "$as_me:$LINENO: checking for struct stat.st_atimensec" >&5
-$as_echo_n "checking for struct stat.st_atimensec... " >&6; }
-if test "${ac_cv_member_struct_stat_st_atimensec+set}" = set; then
- $as_echo_n "(cached) " >&6
-else
- cat >conftest.$ac_ext <<_ACEOF
-/* confdefs.h. */
-_ACEOF
-cat confdefs.h >>conftest.$ac_ext
-cat >>conftest.$ac_ext <<_ACEOF
-/* end confdefs.h. */
-$ac_includes_default
-int
-main ()
-{
-static struct stat ac_aggr;
-if (ac_aggr.st_atimensec)
-return 0;
- ;
- return 0;
-}
-_ACEOF
-rm -f conftest.$ac_objext
-if { (ac_try="$ac_compile"
-case "(($ac_try" in
- *\"* | *\`* | *\\*) ac_try_echo=\$ac_try;;
- *) ac_try_echo=$ac_try;;
-esac
-eval ac_try_echo="\"\$as_me:$LINENO: $ac_try_echo\""
-$as_echo "$ac_try_echo") >&5
- (eval "$ac_compile") 2>conftest.er1
- ac_status=$?
- grep -v '^ *+' conftest.er1 >conftest.err
- rm -f conftest.er1
- cat conftest.err >&5
- $as_echo "$as_me:$LINENO: \$? = $ac_status" >&5
- (exit $ac_status); } && {
- test -z "$ac_c_werror_flag" ||
- test ! -s conftest.err
- } && test -s conftest.$ac_objext; then
- ac_cv_member_struct_stat_st_atimensec=yes
-else
- $as_echo "$as_me: failed program was:" >&5
-sed 's/^/| /' conftest.$ac_ext >&5
-
- cat >conftest.$ac_ext <<_ACEOF
-/* confdefs.h. */
-_ACEOF
-cat confdefs.h >>conftest.$ac_ext
-cat >>conftest.$ac_ext <<_ACEOF
-/* end confdefs.h. */
-$ac_includes_default
-int
-main ()
-{
-static struct stat ac_aggr;
-if (sizeof ac_aggr.st_atimensec)
-return 0;
- ;
- return 0;
-}
-_ACEOF
-rm -f conftest.$ac_objext
-if { (ac_try="$ac_compile"
-case "(($ac_try" in
- *\"* | *\`* | *\\*) ac_try_echo=\$ac_try;;
- *) ac_try_echo=$ac_try;;
-esac
-eval ac_try_echo="\"\$as_me:$LINENO: $ac_try_echo\""
-$as_echo "$ac_try_echo") >&5
- (eval "$ac_compile") 2>conftest.er1
- ac_status=$?
- grep -v '^ *+' conftest.er1 >conftest.err
- rm -f conftest.er1
- cat conftest.err >&5
- $as_echo "$as_me:$LINENO: \$? = $ac_status" >&5
- (exit $ac_status); } && {
- test -z "$ac_c_werror_flag" ||
- test ! -s conftest.err
- } && test -s conftest.$ac_objext; then
- ac_cv_member_struct_stat_st_atimensec=yes
-else
- $as_echo "$as_me: failed program was:" >&5
-sed 's/^/| /' conftest.$ac_ext >&5
-
- ac_cv_member_struct_stat_st_atimensec=no
-fi
-
-rm -f core conftest.err conftest.$ac_objext conftest.$ac_ext
-fi
-
-rm -f core conftest.err conftest.$ac_objext conftest.$ac_ext
-fi
-{ $as_echo "$as_me:$LINENO: result: $ac_cv_member_struct_stat_st_atimensec" >&5
-$as_echo "$ac_cv_member_struct_stat_st_atimensec" >&6; }
-if test $ac_cv_member_struct_stat_st_atimensec = yes; then
-
-cat >>confdefs.h <<_ACEOF
-#define HAVE_STRUCT_STAT_ST_ATIMENSEC 1
-_ACEOF
-
-
-fi
-{ $as_echo "$as_me:$LINENO: checking for struct stat.st_uatime" >&5
-$as_echo_n "checking for struct stat.st_uatime... " >&6; }
-if test "${ac_cv_member_struct_stat_st_uatime+set}" = set; then
- $as_echo_n "(cached) " >&6
-else
- cat >conftest.$ac_ext <<_ACEOF
-/* confdefs.h. */
-_ACEOF
-cat confdefs.h >>conftest.$ac_ext
-cat >>conftest.$ac_ext <<_ACEOF
-/* end confdefs.h. */
-$ac_includes_default
-int
-main ()
-{
-static struct stat ac_aggr;
-if (ac_aggr.st_uatime)
-return 0;
- ;
- return 0;
-}
-_ACEOF
-rm -f conftest.$ac_objext
-if { (ac_try="$ac_compile"
-case "(($ac_try" in
- *\"* | *\`* | *\\*) ac_try_echo=\$ac_try;;
- *) ac_try_echo=$ac_try;;
-esac
-eval ac_try_echo="\"\$as_me:$LINENO: $ac_try_echo\""
-$as_echo "$ac_try_echo") >&5
- (eval "$ac_compile") 2>conftest.er1
- ac_status=$?
- grep -v '^ *+' conftest.er1 >conftest.err
- rm -f conftest.er1
- cat conftest.err >&5
- $as_echo "$as_me:$LINENO: \$? = $ac_status" >&5
- (exit $ac_status); } && {
- test -z "$ac_c_werror_flag" ||
- test ! -s conftest.err
- } && test -s conftest.$ac_objext; then
- ac_cv_member_struct_stat_st_uatime=yes
-else
- $as_echo "$as_me: failed program was:" >&5
-sed 's/^/| /' conftest.$ac_ext >&5
-
- cat >conftest.$ac_ext <<_ACEOF
-/* confdefs.h. */
-_ACEOF
-cat confdefs.h >>conftest.$ac_ext
-cat >>conftest.$ac_ext <<_ACEOF
-/* end confdefs.h. */
-$ac_includes_default
-int
-main ()
-{
-static struct stat ac_aggr;
-if (sizeof ac_aggr.st_uatime)
-return 0;
- ;
- return 0;
-}
-_ACEOF
-rm -f conftest.$ac_objext
-if { (ac_try="$ac_compile"
-case "(($ac_try" in
- *\"* | *\`* | *\\*) ac_try_echo=\$ac_try;;
- *) ac_try_echo=$ac_try;;
-esac
-eval ac_try_echo="\"\$as_me:$LINENO: $ac_try_echo\""
-$as_echo "$ac_try_echo") >&5
- (eval "$ac_compile") 2>conftest.er1
- ac_status=$?
- grep -v '^ *+' conftest.er1 >conftest.err
- rm -f conftest.er1
- cat conftest.err >&5
- $as_echo "$as_me:$LINENO: \$? = $ac_status" >&5
- (exit $ac_status); } && {
- test -z "$ac_c_werror_flag" ||
- test ! -s conftest.err
- } && test -s conftest.$ac_objext; then
- ac_cv_member_struct_stat_st_uatime=yes
-else
- $as_echo "$as_me: failed program was:" >&5
-sed 's/^/| /' conftest.$ac_ext >&5
-
- ac_cv_member_struct_stat_st_uatime=no
-fi
-
-rm -f core conftest.err conftest.$ac_objext conftest.$ac_ext
-fi
-
-rm -f core conftest.err conftest.$ac_objext conftest.$ac_ext
-fi
-{ $as_echo "$as_me:$LINENO: result: $ac_cv_member_struct_stat_st_uatime" >&5
-$as_echo "$ac_cv_member_struct_stat_st_uatime" >&6; }
-if test $ac_cv_member_struct_stat_st_uatime = yes; then
-
-cat >>confdefs.h <<_ACEOF
-#define HAVE_STRUCT_STAT_ST_UATIME 1
-_ACEOF
-
-
-fi
-{ $as_echo "$as_me:$LINENO: checking for struct stat.st_atim.st__tim.tv_nsec" >&5
-$as_echo_n "checking for struct stat.st_atim.st__tim.tv_nsec... " >&6; }
-if test "${ac_cv_member_struct_stat_st_atim_st__tim_tv_nsec+set}" = set; then
- $as_echo_n "(cached) " >&6
-else
- cat >conftest.$ac_ext <<_ACEOF
-/* confdefs.h. */
-_ACEOF
-cat confdefs.h >>conftest.$ac_ext
-cat >>conftest.$ac_ext <<_ACEOF
-/* end confdefs.h. */
-$ac_includes_default
-int
-main ()
-{
-static struct stat ac_aggr;
-if (ac_aggr.st_atim.st__tim.tv_nsec)
-return 0;
- ;
- return 0;
-}
-_ACEOF
-rm -f conftest.$ac_objext
-if { (ac_try="$ac_compile"
-case "(($ac_try" in
- *\"* | *\`* | *\\*) ac_try_echo=\$ac_try;;
- *) ac_try_echo=$ac_try;;
-esac
-eval ac_try_echo="\"\$as_me:$LINENO: $ac_try_echo\""
-$as_echo "$ac_try_echo") >&5
- (eval "$ac_compile") 2>conftest.er1
- ac_status=$?
- grep -v '^ *+' conftest.er1 >conftest.err
- rm -f conftest.er1
- cat conftest.err >&5
- $as_echo "$as_me:$LINENO: \$? = $ac_status" >&5
- (exit $ac_status); } && {
- test -z "$ac_c_werror_flag" ||
- test ! -s conftest.err
- } && test -s conftest.$ac_objext; then
- ac_cv_member_struct_stat_st_atim_st__tim_tv_nsec=yes
-else
- $as_echo "$as_me: failed program was:" >&5
-sed 's/^/| /' conftest.$ac_ext >&5
-
- cat >conftest.$ac_ext <<_ACEOF
-/* confdefs.h. */
-_ACEOF
-cat confdefs.h >>conftest.$ac_ext
-cat >>conftest.$ac_ext <<_ACEOF
-/* end confdefs.h. */
-$ac_includes_default
-int
-main ()
-{
-static struct stat ac_aggr;
-if (sizeof ac_aggr.st_atim.st__tim.tv_nsec)
-return 0;
- ;
- return 0;
-}
-_ACEOF
-rm -f conftest.$ac_objext
-if { (ac_try="$ac_compile"
-case "(($ac_try" in
- *\"* | *\`* | *\\*) ac_try_echo=\$ac_try;;
- *) ac_try_echo=$ac_try;;
-esac
-eval ac_try_echo="\"\$as_me:$LINENO: $ac_try_echo\""
-$as_echo "$ac_try_echo") >&5
- (eval "$ac_compile") 2>conftest.er1
- ac_status=$?
- grep -v '^ *+' conftest.er1 >conftest.err
- rm -f conftest.er1
- cat conftest.err >&5
- $as_echo "$as_me:$LINENO: \$? = $ac_status" >&5
- (exit $ac_status); } && {
- test -z "$ac_c_werror_flag" ||
- test ! -s conftest.err
- } && test -s conftest.$ac_objext; then
- ac_cv_member_struct_stat_st_atim_st__tim_tv_nsec=yes
-else
- $as_echo "$as_me: failed program was:" >&5
-sed 's/^/| /' conftest.$ac_ext >&5
-
- ac_cv_member_struct_stat_st_atim_st__tim_tv_nsec=no
-fi
-
-rm -f core conftest.err conftest.$ac_objext conftest.$ac_ext
-fi
-
-rm -f core conftest.err conftest.$ac_objext conftest.$ac_ext
-fi
-{ $as_echo "$as_me:$LINENO: result: $ac_cv_member_struct_stat_st_atim_st__tim_tv_nsec" >&5
-$as_echo "$ac_cv_member_struct_stat_st_atim_st__tim_tv_nsec" >&6; }
-if test $ac_cv_member_struct_stat_st_atim_st__tim_tv_nsec = yes; then
-
-cat >>confdefs.h <<_ACEOF
-#define HAVE_STRUCT_STAT_ST_ATIM_ST__TIM_TV_NSEC 1
-_ACEOF
-
-
-fi
-
-
-# Check whether --enable-largefile was given.
-if test "${enable_largefile+set}" = set; then
- enableval=$enable_largefile;
-fi
-
-if test "$enable_largefile" != no; then
-
- { $as_echo "$as_me:$LINENO: checking for special C compiler options needed for large files" >&5
-$as_echo_n "checking for special C compiler options needed for large files... " >&6; }
-if test "${ac_cv_sys_largefile_CC+set}" = set; then
- $as_echo_n "(cached) " >&6
-else
- ac_cv_sys_largefile_CC=no
- if test "$GCC" != yes; then
- ac_save_CC=$CC
- while :; do
- # IRIX 6.2 and later do not support large files by default,
- # so use the C compiler's -n32 option if that helps.
- cat >conftest.$ac_ext <<_ACEOF
-/* confdefs.h. */
-_ACEOF
-cat confdefs.h >>conftest.$ac_ext
-cat >>conftest.$ac_ext <<_ACEOF
-/* end confdefs.h. */
-#include <sys/types.h>
- /* Check that off_t can represent 2**63 - 1 correctly.
- We can't simply define LARGE_OFF_T to be 9223372036854775807,
- since some C++ compilers masquerading as C compilers
- incorrectly reject 9223372036854775807. */
-#define LARGE_OFF_T (((off_t) 1 << 62) - 1 + ((off_t) 1 << 62))
- int off_t_is_large[(LARGE_OFF_T % 2147483629 == 721
- && LARGE_OFF_T % 2147483647 == 1)
- ? 1 : -1];
-int
-main ()
-{
-
- ;
- return 0;
-}
-_ACEOF
- rm -f conftest.$ac_objext
-if { (ac_try="$ac_compile"
-case "(($ac_try" in
- *\"* | *\`* | *\\*) ac_try_echo=\$ac_try;;
- *) ac_try_echo=$ac_try;;
-esac
-eval ac_try_echo="\"\$as_me:$LINENO: $ac_try_echo\""
-$as_echo "$ac_try_echo") >&5
- (eval "$ac_compile") 2>conftest.er1
- ac_status=$?
- grep -v '^ *+' conftest.er1 >conftest.err
- rm -f conftest.er1
- cat conftest.err >&5
- $as_echo "$as_me:$LINENO: \$? = $ac_status" >&5
- (exit $ac_status); } && {
- test -z "$ac_c_werror_flag" ||
- test ! -s conftest.err
- } && test -s conftest.$ac_objext; then
- break
-else
- $as_echo "$as_me: failed program was:" >&5
-sed 's/^/| /' conftest.$ac_ext >&5
-
-
-fi
-
-rm -f core conftest.err conftest.$ac_objext
- CC="$CC -n32"
- rm -f conftest.$ac_objext
-if { (ac_try="$ac_compile"
-case "(($ac_try" in
- *\"* | *\`* | *\\*) ac_try_echo=\$ac_try;;
- *) ac_try_echo=$ac_try;;
-esac
-eval ac_try_echo="\"\$as_me:$LINENO: $ac_try_echo\""
-$as_echo "$ac_try_echo") >&5
- (eval "$ac_compile") 2>conftest.er1
- ac_status=$?
- grep -v '^ *+' conftest.er1 >conftest.err
- rm -f conftest.er1
- cat conftest.err >&5
- $as_echo "$as_me:$LINENO: \$? = $ac_status" >&5
- (exit $ac_status); } && {
- test -z "$ac_c_werror_flag" ||
- test ! -s conftest.err
- } && test -s conftest.$ac_objext; then
- ac_cv_sys_largefile_CC=' -n32'; break
-else
- $as_echo "$as_me: failed program was:" >&5
-sed 's/^/| /' conftest.$ac_ext >&5
-
-
-fi
-
-rm -f core conftest.err conftest.$ac_objext
- break
- done
- CC=$ac_save_CC
- rm -f conftest.$ac_ext
- fi
-fi
-{ $as_echo "$as_me:$LINENO: result: $ac_cv_sys_largefile_CC" >&5
-$as_echo "$ac_cv_sys_largefile_CC" >&6; }
- if test "$ac_cv_sys_largefile_CC" != no; then
- CC=$CC$ac_cv_sys_largefile_CC
- fi
-
- { $as_echo "$as_me:$LINENO: checking for _FILE_OFFSET_BITS value needed for large files" >&5
-$as_echo_n "checking for _FILE_OFFSET_BITS value needed for large files... " >&6; }
-if test "${ac_cv_sys_file_offset_bits+set}" = set; then
- $as_echo_n "(cached) " >&6
-else
- while :; do
- cat >conftest.$ac_ext <<_ACEOF
-/* confdefs.h. */
-_ACEOF
-cat confdefs.h >>conftest.$ac_ext
-cat >>conftest.$ac_ext <<_ACEOF
-/* end confdefs.h. */
-#include <sys/types.h>
- /* Check that off_t can represent 2**63 - 1 correctly.
- We can't simply define LARGE_OFF_T to be 9223372036854775807,
- since some C++ compilers masquerading as C compilers
- incorrectly reject 9223372036854775807. */
-#define LARGE_OFF_T (((off_t) 1 << 62) - 1 + ((off_t) 1 << 62))
- int off_t_is_large[(LARGE_OFF_T % 2147483629 == 721
- && LARGE_OFF_T % 2147483647 == 1)
- ? 1 : -1];
-int
-main ()
-{
-
- ;
- return 0;
-}
-_ACEOF
-rm -f conftest.$ac_objext
-if { (ac_try="$ac_compile"
-case "(($ac_try" in
- *\"* | *\`* | *\\*) ac_try_echo=\$ac_try;;
- *) ac_try_echo=$ac_try;;
-esac
-eval ac_try_echo="\"\$as_me:$LINENO: $ac_try_echo\""
-$as_echo "$ac_try_echo") >&5
- (eval "$ac_compile") 2>conftest.er1
- ac_status=$?
- grep -v '^ *+' conftest.er1 >conftest.err
- rm -f conftest.er1
- cat conftest.err >&5
- $as_echo "$as_me:$LINENO: \$? = $ac_status" >&5
- (exit $ac_status); } && {
- test -z "$ac_c_werror_flag" ||
- test ! -s conftest.err
- } && test -s conftest.$ac_objext; then
- ac_cv_sys_file_offset_bits=no; break
-else
- $as_echo "$as_me: failed program was:" >&5
-sed 's/^/| /' conftest.$ac_ext >&5
-
-
-fi
-
-rm -f core conftest.err conftest.$ac_objext conftest.$ac_ext
- cat >conftest.$ac_ext <<_ACEOF
-/* confdefs.h. */
-_ACEOF
-cat confdefs.h >>conftest.$ac_ext
-cat >>conftest.$ac_ext <<_ACEOF
-/* end confdefs.h. */
-#define _FILE_OFFSET_BITS 64
-#include <sys/types.h>
- /* Check that off_t can represent 2**63 - 1 correctly.
- We can't simply define LARGE_OFF_T to be 9223372036854775807,
- since some C++ compilers masquerading as C compilers
- incorrectly reject 9223372036854775807. */
-#define LARGE_OFF_T (((off_t) 1 << 62) - 1 + ((off_t) 1 << 62))
- int off_t_is_large[(LARGE_OFF_T % 2147483629 == 721
- && LARGE_OFF_T % 2147483647 == 1)
- ? 1 : -1];
-int
-main ()
-{
-
- ;
- return 0;
-}
-_ACEOF
-rm -f conftest.$ac_objext
-if { (ac_try="$ac_compile"
-case "(($ac_try" in
- *\"* | *\`* | *\\*) ac_try_echo=\$ac_try;;
- *) ac_try_echo=$ac_try;;
-esac
-eval ac_try_echo="\"\$as_me:$LINENO: $ac_try_echo\""
-$as_echo "$ac_try_echo") >&5
- (eval "$ac_compile") 2>conftest.er1
- ac_status=$?
- grep -v '^ *+' conftest.er1 >conftest.err
- rm -f conftest.er1
- cat conftest.err >&5
- $as_echo "$as_me:$LINENO: \$? = $ac_status" >&5
- (exit $ac_status); } && {
- test -z "$ac_c_werror_flag" ||
- test ! -s conftest.err
- } && test -s conftest.$ac_objext; then
- ac_cv_sys_file_offset_bits=64; break
-else
- $as_echo "$as_me: failed program was:" >&5
-sed 's/^/| /' conftest.$ac_ext >&5
-
-
-fi
-
-rm -f core conftest.err conftest.$ac_objext conftest.$ac_ext
- ac_cv_sys_file_offset_bits=unknown
- break
-done
-fi
-{ $as_echo "$as_me:$LINENO: result: $ac_cv_sys_file_offset_bits" >&5
-$as_echo "$ac_cv_sys_file_offset_bits" >&6; }
-case $ac_cv_sys_file_offset_bits in #(
- no | unknown) ;;
- *)
-cat >>confdefs.h <<_ACEOF
-#define _FILE_OFFSET_BITS $ac_cv_sys_file_offset_bits
-_ACEOF
-;;
-esac
-rm -rf conftest*
- if test $ac_cv_sys_file_offset_bits = unknown; then
- { $as_echo "$as_me:$LINENO: checking for _LARGE_FILES value needed for large files" >&5
-$as_echo_n "checking for _LARGE_FILES value needed for large files... " >&6; }
-if test "${ac_cv_sys_large_files+set}" = set; then
- $as_echo_n "(cached) " >&6
-else
- while :; do
- cat >conftest.$ac_ext <<_ACEOF
-/* confdefs.h. */
-_ACEOF
-cat confdefs.h >>conftest.$ac_ext
-cat >>conftest.$ac_ext <<_ACEOF
-/* end confdefs.h. */
-#include <sys/types.h>
- /* Check that off_t can represent 2**63 - 1 correctly.
- We can't simply define LARGE_OFF_T to be 9223372036854775807,
- since some C++ compilers masquerading as C compilers
- incorrectly reject 9223372036854775807. */
-#define LARGE_OFF_T (((off_t) 1 << 62) - 1 + ((off_t) 1 << 62))
- int off_t_is_large[(LARGE_OFF_T % 2147483629 == 721
- && LARGE_OFF_T % 2147483647 == 1)
- ? 1 : -1];
-int
-main ()
-{
-
- ;
- return 0;
-}
-_ACEOF
-rm -f conftest.$ac_objext
-if { (ac_try="$ac_compile"
-case "(($ac_try" in
- *\"* | *\`* | *\\*) ac_try_echo=\$ac_try;;
- *) ac_try_echo=$ac_try;;
-esac
-eval ac_try_echo="\"\$as_me:$LINENO: $ac_try_echo\""
-$as_echo "$ac_try_echo") >&5
- (eval "$ac_compile") 2>conftest.er1
- ac_status=$?
- grep -v '^ *+' conftest.er1 >conftest.err
- rm -f conftest.er1
- cat conftest.err >&5
- $as_echo "$as_me:$LINENO: \$? = $ac_status" >&5
- (exit $ac_status); } && {
- test -z "$ac_c_werror_flag" ||
- test ! -s conftest.err
- } && test -s conftest.$ac_objext; then
- ac_cv_sys_large_files=no; break
-else
- $as_echo "$as_me: failed program was:" >&5
-sed 's/^/| /' conftest.$ac_ext >&5
-
-
-fi
-
-rm -f core conftest.err conftest.$ac_objext conftest.$ac_ext
- cat >conftest.$ac_ext <<_ACEOF
-/* confdefs.h. */
-_ACEOF
-cat confdefs.h >>conftest.$ac_ext
-cat >>conftest.$ac_ext <<_ACEOF
-/* end confdefs.h. */
-#define _LARGE_FILES 1
-#include <sys/types.h>
- /* Check that off_t can represent 2**63 - 1 correctly.
- We can't simply define LARGE_OFF_T to be 9223372036854775807,
- since some C++ compilers masquerading as C compilers
- incorrectly reject 9223372036854775807. */
-#define LARGE_OFF_T (((off_t) 1 << 62) - 1 + ((off_t) 1 << 62))
- int off_t_is_large[(LARGE_OFF_T % 2147483629 == 721
- && LARGE_OFF_T % 2147483647 == 1)
- ? 1 : -1];
-int
-main ()
-{
-
- ;
- return 0;
-}
-_ACEOF
-rm -f conftest.$ac_objext
-if { (ac_try="$ac_compile"
-case "(($ac_try" in
- *\"* | *\`* | *\\*) ac_try_echo=\$ac_try;;
- *) ac_try_echo=$ac_try;;
-esac
-eval ac_try_echo="\"\$as_me:$LINENO: $ac_try_echo\""
-$as_echo "$ac_try_echo") >&5
- (eval "$ac_compile") 2>conftest.er1
- ac_status=$?
- grep -v '^ *+' conftest.er1 >conftest.err
- rm -f conftest.er1
- cat conftest.err >&5
- $as_echo "$as_me:$LINENO: \$? = $ac_status" >&5
- (exit $ac_status); } && {
- test -z "$ac_c_werror_flag" ||
- test ! -s conftest.err
- } && test -s conftest.$ac_objext; then
- ac_cv_sys_large_files=1; break
-else
- $as_echo "$as_me: failed program was:" >&5
-sed 's/^/| /' conftest.$ac_ext >&5
-
-
-fi
-
-rm -f core conftest.err conftest.$ac_objext conftest.$ac_ext
- ac_cv_sys_large_files=unknown
- break
-done
-fi
-{ $as_echo "$as_me:$LINENO: result: $ac_cv_sys_large_files" >&5
-$as_echo "$ac_cv_sys_large_files" >&6; }
-case $ac_cv_sys_large_files in #(
- no | unknown) ;;
- *)
-cat >>confdefs.h <<_ACEOF
-#define _LARGE_FILES $ac_cv_sys_large_files
-_ACEOF
-;;
-esac
-rm -rf conftest*
- fi
-fi
-
-
- { $as_echo "$as_me:$LINENO: checking whether byte ordering is bigendian" >&5
-$as_echo_n "checking whether byte ordering is bigendian... " >&6; }
-if test "${ac_cv_c_bigendian+set}" = set; then
- $as_echo_n "(cached) " >&6
-else
- ac_cv_c_bigendian=unknown
- # See if __BIG_ENDIAN__ or __LITTLE_ENDIAN__ is defined.
- cat >conftest.$ac_ext <<_ACEOF
-/* confdefs.h. */
-_ACEOF
-cat confdefs.h >>conftest.$ac_ext
-cat >>conftest.$ac_ext <<_ACEOF
-/* end confdefs.h. */
-#if ! (defined __BIG_ENDIAN__ || defined __LITTLE_ENDIAN__)
- neither is defined;
- #endif
- typedef int dummy;
-
-_ACEOF
-rm -f conftest.$ac_objext
-if { (ac_try="$ac_compile"
-case "(($ac_try" in
- *\"* | *\`* | *\\*) ac_try_echo=\$ac_try;;
- *) ac_try_echo=$ac_try;;
-esac
-eval ac_try_echo="\"\$as_me:$LINENO: $ac_try_echo\""
-$as_echo "$ac_try_echo") >&5
- (eval "$ac_compile") 2>conftest.er1
- ac_status=$?
- grep -v '^ *+' conftest.er1 >conftest.err
- rm -f conftest.er1
- cat conftest.err >&5
- $as_echo "$as_me:$LINENO: \$? = $ac_status" >&5
- (exit $ac_status); } && {
- test -z "$ac_c_werror_flag" ||
- test ! -s conftest.err
- } && test -s conftest.$ac_objext; then
- ac_cv_c_bigendian=universal
-else
- $as_echo "$as_me: failed program was:" >&5
-sed 's/^/| /' conftest.$ac_ext >&5
-
-
-fi
-
-rm -f core conftest.err conftest.$ac_objext conftest.$ac_ext
- if test $ac_cv_c_bigendian = unknown; then
- # See if sys/param.h defines the BYTE_ORDER macro.
- cat >conftest.$ac_ext <<_ACEOF
-/* confdefs.h. */
-_ACEOF
-cat confdefs.h >>conftest.$ac_ext
-cat >>conftest.$ac_ext <<_ACEOF
-/* end confdefs.h. */
-#include <sys/types.h>
- #include <sys/param.h>
-
-int
-main ()
-{
-#if ! (defined BYTE_ORDER && defined BIG_ENDIAN \
- && defined LITTLE_ENDIAN && BYTE_ORDER && BIG_ENDIAN \
- && LITTLE_ENDIAN)
- bogus endian macros
- #endif
-
- ;
- return 0;
-}
-_ACEOF
-rm -f conftest.$ac_objext
-if { (ac_try="$ac_compile"
-case "(($ac_try" in
- *\"* | *\`* | *\\*) ac_try_echo=\$ac_try;;
- *) ac_try_echo=$ac_try;;
-esac
-eval ac_try_echo="\"\$as_me:$LINENO: $ac_try_echo\""
-$as_echo "$ac_try_echo") >&5
- (eval "$ac_compile") 2>conftest.er1
- ac_status=$?
- grep -v '^ *+' conftest.er1 >conftest.err
- rm -f conftest.er1
- cat conftest.err >&5
- $as_echo "$as_me:$LINENO: \$? = $ac_status" >&5
- (exit $ac_status); } && {
- test -z "$ac_c_werror_flag" ||
- test ! -s conftest.err
- } && test -s conftest.$ac_objext; then
- # It does; now see whether it defined to BIG_ENDIAN or not.
- cat >conftest.$ac_ext <<_ACEOF
-/* confdefs.h. */
-_ACEOF
-cat confdefs.h >>conftest.$ac_ext
-cat >>conftest.$ac_ext <<_ACEOF
-/* end confdefs.h. */
-#include <sys/types.h>
- #include <sys/param.h>
-
-int
-main ()
-{
-#if BYTE_ORDER != BIG_ENDIAN
- not big endian
- #endif
-
- ;
- return 0;
-}
-_ACEOF
-rm -f conftest.$ac_objext
-if { (ac_try="$ac_compile"
-case "(($ac_try" in
- *\"* | *\`* | *\\*) ac_try_echo=\$ac_try;;
- *) ac_try_echo=$ac_try;;
-esac
-eval ac_try_echo="\"\$as_me:$LINENO: $ac_try_echo\""
-$as_echo "$ac_try_echo") >&5
- (eval "$ac_compile") 2>conftest.er1
- ac_status=$?
- grep -v '^ *+' conftest.er1 >conftest.err
- rm -f conftest.er1
- cat conftest.err >&5
- $as_echo "$as_me:$LINENO: \$? = $ac_status" >&5
- (exit $ac_status); } && {
- test -z "$ac_c_werror_flag" ||
- test ! -s conftest.err
- } && test -s conftest.$ac_objext; then
- ac_cv_c_bigendian=yes
-else
- $as_echo "$as_me: failed program was:" >&5
-sed 's/^/| /' conftest.$ac_ext >&5
-
- ac_cv_c_bigendian=no
-fi
-
-rm -f core conftest.err conftest.$ac_objext conftest.$ac_ext
-else
- $as_echo "$as_me: failed program was:" >&5
-sed 's/^/| /' conftest.$ac_ext >&5
-
-
-fi
-
-rm -f core conftest.err conftest.$ac_objext conftest.$ac_ext
- fi
- if test $ac_cv_c_bigendian = unknown; then
- # See if <limits.h> defines _LITTLE_ENDIAN or _BIG_ENDIAN (e.g., Solaris).
- cat >conftest.$ac_ext <<_ACEOF
-/* confdefs.h. */
-_ACEOF
-cat confdefs.h >>conftest.$ac_ext
-cat >>conftest.$ac_ext <<_ACEOF
-/* end confdefs.h. */
-#include <limits.h>
-
-int
-main ()
-{
-#if ! (defined _LITTLE_ENDIAN || defined _BIG_ENDIAN)
- bogus endian macros
- #endif
-
- ;
- return 0;
-}
-_ACEOF
-rm -f conftest.$ac_objext
-if { (ac_try="$ac_compile"
-case "(($ac_try" in
- *\"* | *\`* | *\\*) ac_try_echo=\$ac_try;;
- *) ac_try_echo=$ac_try;;
-esac
-eval ac_try_echo="\"\$as_me:$LINENO: $ac_try_echo\""
-$as_echo "$ac_try_echo") >&5
- (eval "$ac_compile") 2>conftest.er1
- ac_status=$?
- grep -v '^ *+' conftest.er1 >conftest.err
- rm -f conftest.er1
- cat conftest.err >&5
- $as_echo "$as_me:$LINENO: \$? = $ac_status" >&5
- (exit $ac_status); } && {
- test -z "$ac_c_werror_flag" ||
- test ! -s conftest.err
- } && test -s conftest.$ac_objext; then
- # It does; now see whether it defined to _BIG_ENDIAN or not.
- cat >conftest.$ac_ext <<_ACEOF
-/* confdefs.h. */
-_ACEOF
-cat confdefs.h >>conftest.$ac_ext
-cat >>conftest.$ac_ext <<_ACEOF
-/* end confdefs.h. */
-#include <limits.h>
-
-int
-main ()
-{
-#ifndef _BIG_ENDIAN
- not big endian
- #endif
-
- ;
- return 0;
-}
-_ACEOF
-rm -f conftest.$ac_objext
-if { (ac_try="$ac_compile"
-case "(($ac_try" in
- *\"* | *\`* | *\\*) ac_try_echo=\$ac_try;;
- *) ac_try_echo=$ac_try;;
-esac
-eval ac_try_echo="\"\$as_me:$LINENO: $ac_try_echo\""
-$as_echo "$ac_try_echo") >&5
- (eval "$ac_compile") 2>conftest.er1
- ac_status=$?
- grep -v '^ *+' conftest.er1 >conftest.err
- rm -f conftest.er1
- cat conftest.err >&5
- $as_echo "$as_me:$LINENO: \$? = $ac_status" >&5
- (exit $ac_status); } && {
- test -z "$ac_c_werror_flag" ||
- test ! -s conftest.err
- } && test -s conftest.$ac_objext; then
- ac_cv_c_bigendian=yes
-else
- $as_echo "$as_me: failed program was:" >&5
-sed 's/^/| /' conftest.$ac_ext >&5
-
- ac_cv_c_bigendian=no
-fi
-
-rm -f core conftest.err conftest.$ac_objext conftest.$ac_ext
-else
- $as_echo "$as_me: failed program was:" >&5
-sed 's/^/| /' conftest.$ac_ext >&5
-
-
-fi
-
-rm -f core conftest.err conftest.$ac_objext conftest.$ac_ext
- fi
- if test $ac_cv_c_bigendian = unknown; then
- # Compile a test program.
- if test "$cross_compiling" = yes; then
- # Try to guess by grepping values from an object file.
- cat >conftest.$ac_ext <<_ACEOF
-/* confdefs.h. */
-_ACEOF
-cat confdefs.h >>conftest.$ac_ext
-cat >>conftest.$ac_ext <<_ACEOF
-/* end confdefs.h. */
-short int ascii_mm[] =
- { 0x4249, 0x4765, 0x6E44, 0x6961, 0x6E53, 0x7953, 0 };
- short int ascii_ii[] =
- { 0x694C, 0x5454, 0x656C, 0x6E45, 0x6944, 0x6E61, 0 };
- int use_ascii (int i) {
- return ascii_mm[i] + ascii_ii[i];
- }
- short int ebcdic_ii[] =
- { 0x89D3, 0xE3E3, 0x8593, 0x95C5, 0x89C4, 0x9581, 0 };
- short int ebcdic_mm[] =
- { 0xC2C9, 0xC785, 0x95C4, 0x8981, 0x95E2, 0xA8E2, 0 };
- int use_ebcdic (int i) {
- return ebcdic_mm[i] + ebcdic_ii[i];
- }
- extern int foo;
-
-int
-main ()
-{
-return use_ascii (foo) == use_ebcdic (foo);
- ;
- return 0;
-}
-_ACEOF
-rm -f conftest.$ac_objext
-if { (ac_try="$ac_compile"
-case "(($ac_try" in
- *\"* | *\`* | *\\*) ac_try_echo=\$ac_try;;
- *) ac_try_echo=$ac_try;;
-esac
-eval ac_try_echo="\"\$as_me:$LINENO: $ac_try_echo\""
-$as_echo "$ac_try_echo") >&5
- (eval "$ac_compile") 2>conftest.er1
- ac_status=$?
- grep -v '^ *+' conftest.er1 >conftest.err
- rm -f conftest.er1
- cat conftest.err >&5
- $as_echo "$as_me:$LINENO: \$? = $ac_status" >&5
- (exit $ac_status); } && {
- test -z "$ac_c_werror_flag" ||
- test ! -s conftest.err
- } && test -s conftest.$ac_objext; then
- if grep BIGenDianSyS conftest.$ac_objext >/dev/null; then
- ac_cv_c_bigendian=yes
- fi
- if grep LiTTleEnDian conftest.$ac_objext >/dev/null ; then
- if test "$ac_cv_c_bigendian" = unknown; then
- ac_cv_c_bigendian=no
- else
- # finding both strings is unlikely to happen, but who knows?
- ac_cv_c_bigendian=unknown
- fi
- fi
-else
- $as_echo "$as_me: failed program was:" >&5
-sed 's/^/| /' conftest.$ac_ext >&5
-
-
-fi
-
-rm -f core conftest.err conftest.$ac_objext conftest.$ac_ext
-else
- cat >conftest.$ac_ext <<_ACEOF
-/* confdefs.h. */
-_ACEOF
-cat confdefs.h >>conftest.$ac_ext
-cat >>conftest.$ac_ext <<_ACEOF
-/* end confdefs.h. */
-$ac_includes_default
-int
-main ()
-{
-
- /* Are we little or big endian? From Harbison&Steele. */
- union
- {
- long int l;
- char c[sizeof (long int)];
- } u;
- u.l = 1;
- return u.c[sizeof (long int) - 1] == 1;
-
- ;
- return 0;
-}
-_ACEOF
-rm -f conftest$ac_exeext
-if { (ac_try="$ac_link"
-case "(($ac_try" in
- *\"* | *\`* | *\\*) ac_try_echo=\$ac_try;;
- *) ac_try_echo=$ac_try;;
-esac
-eval ac_try_echo="\"\$as_me:$LINENO: $ac_try_echo\""
-$as_echo "$ac_try_echo") >&5
- (eval "$ac_link") 2>&5
- ac_status=$?
- $as_echo "$as_me:$LINENO: \$? = $ac_status" >&5
- (exit $ac_status); } && { ac_try='./conftest$ac_exeext'
- { (case "(($ac_try" in
- *\"* | *\`* | *\\*) ac_try_echo=\$ac_try;;
- *) ac_try_echo=$ac_try;;
-esac
-eval ac_try_echo="\"\$as_me:$LINENO: $ac_try_echo\""
-$as_echo "$ac_try_echo") >&5
- (eval "$ac_try") 2>&5
- ac_status=$?
- $as_echo "$as_me:$LINENO: \$? = $ac_status" >&5
- (exit $ac_status); }; }; then
- ac_cv_c_bigendian=no
-else
- $as_echo "$as_me: program exited with status $ac_status" >&5
-$as_echo "$as_me: failed program was:" >&5
-sed 's/^/| /' conftest.$ac_ext >&5
-
-( exit $ac_status )
-ac_cv_c_bigendian=yes
-fi
-rm -rf conftest.dSYM
-rm -f core *.core core.conftest.* gmon.out bb.out conftest$ac_exeext conftest.$ac_objext conftest.$ac_ext
-fi
-
-
- fi
-fi
-{ $as_echo "$as_me:$LINENO: result: $ac_cv_c_bigendian" >&5
-$as_echo "$ac_cv_c_bigendian" >&6; }
- case $ac_cv_c_bigendian in #(
- yes)
- cat >>confdefs.h <<\_ACEOF
-#define WORDS_BIGENDIAN 1
-_ACEOF
-;; #(
- no)
- ;; #(
- universal)
- ;; #(
- *)
- { { $as_echo "$as_me:$LINENO: error: unknown endianness
- presetting ac_cv_c_bigendian=no (or yes) will help" >&5
-$as_echo "$as_me: error: unknown endianness
- presetting ac_cv_c_bigendian=no (or yes) will help" >&2;}
- { (exit 1); exit 1; }; } ;;
- esac
-
-
-
-###############################################################################
-# Checks for library functions.
-###############################################################################
-
-# Gnulib replacements as needed
-
- if test -z "$GETOPT_H"; then
-
-for ac_header in getopt.h
-do
-as_ac_Header=`$as_echo "ac_cv_header_$ac_header" | $as_tr_sh`
-if { as_var=$as_ac_Header; eval "test \"\${$as_var+set}\" = set"; }; then
- { $as_echo "$as_me:$LINENO: checking for $ac_header" >&5
-$as_echo_n "checking for $ac_header... " >&6; }
-if { as_var=$as_ac_Header; eval "test \"\${$as_var+set}\" = set"; }; then
- $as_echo_n "(cached) " >&6
-fi
-ac_res=`eval 'as_val=${'$as_ac_Header'}
- $as_echo "$as_val"'`
- { $as_echo "$as_me:$LINENO: result: $ac_res" >&5
-$as_echo "$ac_res" >&6; }
-else
- # Is the header compilable?
-{ $as_echo "$as_me:$LINENO: checking $ac_header usability" >&5
-$as_echo_n "checking $ac_header usability... " >&6; }
-cat >conftest.$ac_ext <<_ACEOF
-/* confdefs.h. */
-_ACEOF
-cat confdefs.h >>conftest.$ac_ext
-cat >>conftest.$ac_ext <<_ACEOF
-/* end confdefs.h. */
-$ac_includes_default
-#include <$ac_header>
-_ACEOF
-rm -f conftest.$ac_objext
-if { (ac_try="$ac_compile"
-case "(($ac_try" in
- *\"* | *\`* | *\\*) ac_try_echo=\$ac_try;;
- *) ac_try_echo=$ac_try;;
-esac
-eval ac_try_echo="\"\$as_me:$LINENO: $ac_try_echo\""
-$as_echo "$ac_try_echo") >&5
- (eval "$ac_compile") 2>conftest.er1
- ac_status=$?
- grep -v '^ *+' conftest.er1 >conftest.err
- rm -f conftest.er1
- cat conftest.err >&5
- $as_echo "$as_me:$LINENO: \$? = $ac_status" >&5
- (exit $ac_status); } && {
- test -z "$ac_c_werror_flag" ||
- test ! -s conftest.err
- } && test -s conftest.$ac_objext; then
- ac_header_compiler=yes
-else
- $as_echo "$as_me: failed program was:" >&5
-sed 's/^/| /' conftest.$ac_ext >&5
-
- ac_header_compiler=no
-fi
-
-rm -f core conftest.err conftest.$ac_objext conftest.$ac_ext
-{ $as_echo "$as_me:$LINENO: result: $ac_header_compiler" >&5
-$as_echo "$ac_header_compiler" >&6; }
-
-# Is the header present?
-{ $as_echo "$as_me:$LINENO: checking $ac_header presence" >&5
-$as_echo_n "checking $ac_header presence... " >&6; }
-cat >conftest.$ac_ext <<_ACEOF
-/* confdefs.h. */
-_ACEOF
-cat confdefs.h >>conftest.$ac_ext
-cat >>conftest.$ac_ext <<_ACEOF
-/* end confdefs.h. */
-#include <$ac_header>
-_ACEOF
-if { (ac_try="$ac_cpp conftest.$ac_ext"
-case "(($ac_try" in
- *\"* | *\`* | *\\*) ac_try_echo=\$ac_try;;
- *) ac_try_echo=$ac_try;;
-esac
-eval ac_try_echo="\"\$as_me:$LINENO: $ac_try_echo\""
-$as_echo "$ac_try_echo") >&5
- (eval "$ac_cpp conftest.$ac_ext") 2>conftest.er1
- ac_status=$?
- grep -v '^ *+' conftest.er1 >conftest.err
- rm -f conftest.er1
- cat conftest.err >&5
- $as_echo "$as_me:$LINENO: \$? = $ac_status" >&5
- (exit $ac_status); } >/dev/null && {
- test -z "$ac_c_preproc_warn_flag$ac_c_werror_flag" ||
- test ! -s conftest.err
- }; then
- ac_header_preproc=yes
-else
- $as_echo "$as_me: failed program was:" >&5
-sed 's/^/| /' conftest.$ac_ext >&5
-
- ac_header_preproc=no
-fi
-
-rm -f conftest.err conftest.$ac_ext
-{ $as_echo "$as_me:$LINENO: result: $ac_header_preproc" >&5
-$as_echo "$ac_header_preproc" >&6; }
-
-# So? What about this header?
-case $ac_header_compiler:$ac_header_preproc:$ac_c_preproc_warn_flag in
- yes:no: )
- { $as_echo "$as_me:$LINENO: WARNING: $ac_header: accepted by the compiler, rejected by the preprocessor!" >&5
-$as_echo "$as_me: WARNING: $ac_header: accepted by the compiler, rejected by the preprocessor!" >&2;}
- { $as_echo "$as_me:$LINENO: WARNING: $ac_header: proceeding with the compiler's result" >&5
-$as_echo "$as_me: WARNING: $ac_header: proceeding with the compiler's result" >&2;}
- ac_header_preproc=yes
- ;;
- no:yes:* )
- { $as_echo "$as_me:$LINENO: WARNING: $ac_header: present but cannot be compiled" >&5
-$as_echo "$as_me: WARNING: $ac_header: present but cannot be compiled" >&2;}
- { $as_echo "$as_me:$LINENO: WARNING: $ac_header: check for missing prerequisite headers?" >&5
-$as_echo "$as_me: WARNING: $ac_header: check for missing prerequisite headers?" >&2;}
- { $as_echo "$as_me:$LINENO: WARNING: $ac_header: see the Autoconf documentation" >&5
-$as_echo "$as_me: WARNING: $ac_header: see the Autoconf documentation" >&2;}
- { $as_echo "$as_me:$LINENO: WARNING: $ac_header: section \"Present But Cannot Be Compiled\"" >&5
-$as_echo "$as_me: WARNING: $ac_header: section \"Present But Cannot Be Compiled\"" >&2;}
- { $as_echo "$as_me:$LINENO: WARNING: $ac_header: proceeding with the preprocessor's result" >&5
-$as_echo "$as_me: WARNING: $ac_header: proceeding with the preprocessor's result" >&2;}
- { $as_echo "$as_me:$LINENO: WARNING: $ac_header: in the future, the compiler will take precedence" >&5
-$as_echo "$as_me: WARNING: $ac_header: in the future, the compiler will take precedence" >&2;}
- ( cat <<\_ASBOX
-## --------------------------------------- ##
-## Report this to lasse.collin@tukaani.org ##
-## --------------------------------------- ##
-_ASBOX
- ) | sed "s/^/$as_me: WARNING: /" >&2
- ;;
-esac
-{ $as_echo "$as_me:$LINENO: checking for $ac_header" >&5
-$as_echo_n "checking for $ac_header... " >&6; }
-if { as_var=$as_ac_Header; eval "test \"\${$as_var+set}\" = set"; }; then
- $as_echo_n "(cached) " >&6
-else
- eval "$as_ac_Header=\$ac_header_preproc"
-fi
-ac_res=`eval 'as_val=${'$as_ac_Header'}
- $as_echo "$as_val"'`
- { $as_echo "$as_me:$LINENO: result: $ac_res" >&5
-$as_echo "$ac_res" >&6; }
-
-fi
-if test `eval 'as_val=${'$as_ac_Header'}
- $as_echo "$as_val"'` = yes; then
- cat >>confdefs.h <<_ACEOF
-#define `$as_echo "HAVE_$ac_header" | $as_tr_cpp` 1
-_ACEOF
-
-else
- GETOPT_H=getopt.h
-fi
-
-done
-
- fi
-
- if test -z "$GETOPT_H"; then
- { $as_echo "$as_me:$LINENO: checking whether optreset is declared" >&5
-$as_echo_n "checking whether optreset is declared... " >&6; }
-if test "${ac_cv_have_decl_optreset+set}" = set; then
- $as_echo_n "(cached) " >&6
-else
- cat >conftest.$ac_ext <<_ACEOF
-/* confdefs.h. */
-_ACEOF
-cat confdefs.h >>conftest.$ac_ext
-cat >>conftest.$ac_ext <<_ACEOF
-/* end confdefs.h. */
-#include <getopt.h>
-
-int
-main ()
-{
-#ifndef optreset
- (void) optreset;
-#endif
-
- ;
- return 0;
-}
-_ACEOF
-rm -f conftest.$ac_objext
-if { (ac_try="$ac_compile"
-case "(($ac_try" in
- *\"* | *\`* | *\\*) ac_try_echo=\$ac_try;;
- *) ac_try_echo=$ac_try;;
-esac
-eval ac_try_echo="\"\$as_me:$LINENO: $ac_try_echo\""
-$as_echo "$ac_try_echo") >&5
- (eval "$ac_compile") 2>conftest.er1
- ac_status=$?
- grep -v '^ *+' conftest.er1 >conftest.err
- rm -f conftest.er1
- cat conftest.err >&5
- $as_echo "$as_me:$LINENO: \$? = $ac_status" >&5
- (exit $ac_status); } && {
- test -z "$ac_c_werror_flag" ||
- test ! -s conftest.err
- } && test -s conftest.$ac_objext; then
- ac_cv_have_decl_optreset=yes
-else
- $as_echo "$as_me: failed program was:" >&5
-sed 's/^/| /' conftest.$ac_ext >&5
-
- ac_cv_have_decl_optreset=no
-fi
-
-rm -f core conftest.err conftest.$ac_objext conftest.$ac_ext
-fi
-{ $as_echo "$as_me:$LINENO: result: $ac_cv_have_decl_optreset" >&5
-$as_echo "$ac_cv_have_decl_optreset" >&6; }
-if test $ac_cv_have_decl_optreset = yes; then
-
-cat >>confdefs.h <<\_ACEOF
-#define HAVE_OPTRESET 1
-_ACEOF
-
-fi
-
- fi
-
-
-
-
- if test -n "$GETOPT_H"; then
-
- case " $LIBOBJS " in
- *" getopt.$ac_objext "* ) ;;
- *) LIBOBJS="$LIBOBJS getopt.$ac_objext"
- ;;
-esac
-
- case " $LIBOBJS " in
- *" getopt1.$ac_objext "* ) ;;
- *) LIBOBJS="$LIBOBJS getopt1.$ac_objext"
- ;;
-esac
-
-
- GETOPT_H=getopt.h
-
-cat >>confdefs.h <<\_ACEOF
-#define __GETOPT_PREFIX rpl_
-_ACEOF
-
-
-
-
-fi
-
-
-
-# Find the best function to set timestamps.
-
-
-
-
-
-for ac_func in futimens futimes futimesat utimes utime
-do
-as_ac_var=`$as_echo "ac_cv_func_$ac_func" | $as_tr_sh`
-{ $as_echo "$as_me:$LINENO: checking for $ac_func" >&5
-$as_echo_n "checking for $ac_func... " >&6; }
-if { as_var=$as_ac_var; eval "test \"\${$as_var+set}\" = set"; }; then
- $as_echo_n "(cached) " >&6
-else
- cat >conftest.$ac_ext <<_ACEOF
-/* confdefs.h. */
-_ACEOF
-cat confdefs.h >>conftest.$ac_ext
-cat >>conftest.$ac_ext <<_ACEOF
-/* end confdefs.h. */
-/* Define $ac_func to an innocuous variant, in case <limits.h> declares $ac_func.
- For example, HP-UX 11i <limits.h> declares gettimeofday. */
-#define $ac_func innocuous_$ac_func
-
-/* System header to define __stub macros and hopefully few prototypes,
- which can conflict with char $ac_func (); below.
- Prefer <limits.h> to <assert.h> if __STDC__ is defined, since
- <limits.h> exists even on freestanding compilers. */
-
-#ifdef __STDC__
-# include <limits.h>
-#else
-# include <assert.h>
-#endif
-
-#undef $ac_func
-
-/* Override any GCC internal prototype to avoid an error.
- Use char because int might match the return type of a GCC
- builtin and then its argument prototype would still apply. */
-#ifdef __cplusplus
-extern "C"
-#endif
-char $ac_func ();
-/* The GNU C library defines this for functions which it implements
- to always fail with ENOSYS. Some functions are actually named
- something starting with __ and the normal name is an alias. */
-#if defined __stub_$ac_func || defined __stub___$ac_func
-choke me
-#endif
-
-int
-main ()
-{
-return $ac_func ();
- ;
- return 0;
-}
-_ACEOF
-rm -f conftest.$ac_objext conftest$ac_exeext
-if { (ac_try="$ac_link"
-case "(($ac_try" in
- *\"* | *\`* | *\\*) ac_try_echo=\$ac_try;;
- *) ac_try_echo=$ac_try;;
-esac
-eval ac_try_echo="\"\$as_me:$LINENO: $ac_try_echo\""
-$as_echo "$ac_try_echo") >&5
- (eval "$ac_link") 2>conftest.er1
- ac_status=$?
- grep -v '^ *+' conftest.er1 >conftest.err
- rm -f conftest.er1
- cat conftest.err >&5
- $as_echo "$as_me:$LINENO: \$? = $ac_status" >&5
- (exit $ac_status); } && {
- test -z "$ac_c_werror_flag" ||
- test ! -s conftest.err
- } && test -s conftest$ac_exeext && {
- test "$cross_compiling" = yes ||
- $as_test_x conftest$ac_exeext
- }; then
- eval "$as_ac_var=yes"
-else
- $as_echo "$as_me: failed program was:" >&5
-sed 's/^/| /' conftest.$ac_ext >&5
-
- eval "$as_ac_var=no"
-fi
-
-rm -rf conftest.dSYM
-rm -f core conftest.err conftest.$ac_objext conftest_ipa8_conftest.oo \
- conftest$ac_exeext conftest.$ac_ext
-fi
-ac_res=`eval 'as_val=${'$as_ac_var'}
- $as_echo "$as_val"'`
- { $as_echo "$as_me:$LINENO: result: $ac_res" >&5
-$as_echo "$ac_res" >&6; }
-if test `eval 'as_val=${'$as_ac_var'}
- $as_echo "$as_val"'` = yes; then
- cat >>confdefs.h <<_ACEOF
-#define `$as_echo "HAVE_$ac_func" | $as_tr_cpp` 1
-_ACEOF
- break
-fi
-done
-
-
-# Check how to find out the amount of physical memory in the system. The
-# xz command line tool uses this to automatically limit its memory usage.
-# - sysconf() gives all the needed info on GNU+Linux and Solaris.
-# - BSDs use sysctl().
-{ $as_echo "$as_me:$LINENO: checking how to detect the amount of physical memory" >&5
-$as_echo_n "checking how to detect the amount of physical memory... " >&6; }
-cat >conftest.$ac_ext <<_ACEOF
-/* confdefs.h. */
-_ACEOF
-cat confdefs.h >>conftest.$ac_ext
-cat >>conftest.$ac_ext <<_ACEOF
-/* end confdefs.h. */
-
-#include <unistd.h>
-int
-main()
-{
- long i;
- i = sysconf(_SC_PAGESIZE);
- i = sysconf(_SC_PHYS_PAGES);
- return 0;
-}
-
-_ACEOF
-rm -f conftest.$ac_objext
-if { (ac_try="$ac_compile"
-case "(($ac_try" in
- *\"* | *\`* | *\\*) ac_try_echo=\$ac_try;;
- *) ac_try_echo=$ac_try;;
-esac
-eval ac_try_echo="\"\$as_me:$LINENO: $ac_try_echo\""
-$as_echo "$ac_try_echo") >&5
- (eval "$ac_compile") 2>conftest.er1
- ac_status=$?
- grep -v '^ *+' conftest.er1 >conftest.err
- rm -f conftest.er1
- cat conftest.err >&5
- $as_echo "$as_me:$LINENO: \$? = $ac_status" >&5
- (exit $ac_status); } && {
- test -z "$ac_c_werror_flag" ||
- test ! -s conftest.err
- } && test -s conftest.$ac_objext; then
-
-
-cat >>confdefs.h <<\_ACEOF
-#define HAVE_PHYSMEM_SYSCONF 1
-_ACEOF
-
- { $as_echo "$as_me:$LINENO: result: sysconf" >&5
-$as_echo "sysconf" >&6; }
-
-else
- $as_echo "$as_me: failed program was:" >&5
-sed 's/^/| /' conftest.$ac_ext >&5
-
-
-cat >conftest.$ac_ext <<_ACEOF
-/* confdefs.h. */
-_ACEOF
-cat confdefs.h >>conftest.$ac_ext
-cat >>conftest.$ac_ext <<_ACEOF
-/* end confdefs.h. */
-
-#include <sys/types.h>
-#ifdef HAVE_SYS_PARAM_H
-# include <sys/param.h>
-#endif
-#include <sys/sysctl.h>
-int
-main()
-{
- int name[2] = { CTL_HW, HW_PHYSMEM };
- unsigned long mem;
- size_t mem_ptr_size = sizeof(mem);
- sysctl(name, 2, &mem, &mem_ptr_size, NULL, NULL);
- return 0;
-}
-
-_ACEOF
-rm -f conftest.$ac_objext
-if { (ac_try="$ac_compile"
-case "(($ac_try" in
- *\"* | *\`* | *\\*) ac_try_echo=\$ac_try;;
- *) ac_try_echo=$ac_try;;
-esac
-eval ac_try_echo="\"\$as_me:$LINENO: $ac_try_echo\""
-$as_echo "$ac_try_echo") >&5
- (eval "$ac_compile") 2>conftest.er1
- ac_status=$?
- grep -v '^ *+' conftest.er1 >conftest.err
- rm -f conftest.er1
- cat conftest.err >&5
- $as_echo "$as_me:$LINENO: \$? = $ac_status" >&5
- (exit $ac_status); } && {
- test -z "$ac_c_werror_flag" ||
- test ! -s conftest.err
- } && test -s conftest.$ac_objext; then
-
-
-cat >>confdefs.h <<\_ACEOF
-#define HAVE_PHYSMEM_SYSCTL 1
-_ACEOF
-
- { $as_echo "$as_me:$LINENO: result: sysctl" >&5
-$as_echo "sysctl" >&6; }
-
-else
- $as_echo "$as_me: failed program was:" >&5
-sed 's/^/| /' conftest.$ac_ext >&5
-
-
- { $as_echo "$as_me:$LINENO: result: unknown" >&5
-$as_echo "unknown" >&6; }
-
-fi
-
-rm -f core conftest.err conftest.$ac_objext conftest.$ac_ext
-fi
-
-rm -f core conftest.err conftest.$ac_objext conftest.$ac_ext
-
-# Check how to find out the number of available CPU cores in the system.
-# sysconf(_SC_NPROCESSORS_ONLN) works on most systems, except that BSDs
-# use sysctl().
-{ $as_echo "$as_me:$LINENO: checking how to detect the number of available CPU cores" >&5
-$as_echo_n "checking how to detect the number of available CPU cores... " >&6; }
-cat >conftest.$ac_ext <<_ACEOF
-/* confdefs.h. */
-_ACEOF
-cat confdefs.h >>conftest.$ac_ext
-cat >>conftest.$ac_ext <<_ACEOF
-/* end confdefs.h. */
-
-#include <unistd.h>
-int
-main()
-{
- long i;
- i = sysconf(_SC_NPROCESSORS_ONLN);
- return 0;
-}
-
-_ACEOF
-rm -f conftest.$ac_objext
-if { (ac_try="$ac_compile"
-case "(($ac_try" in
- *\"* | *\`* | *\\*) ac_try_echo=\$ac_try;;
- *) ac_try_echo=$ac_try;;
-esac
-eval ac_try_echo="\"\$as_me:$LINENO: $ac_try_echo\""
-$as_echo "$ac_try_echo") >&5
- (eval "$ac_compile") 2>conftest.er1
- ac_status=$?
- grep -v '^ *+' conftest.er1 >conftest.err
- rm -f conftest.er1
- cat conftest.err >&5
- $as_echo "$as_me:$LINENO: \$? = $ac_status" >&5
- (exit $ac_status); } && {
- test -z "$ac_c_werror_flag" ||
- test ! -s conftest.err
- } && test -s conftest.$ac_objext; then
-
-
-cat >>confdefs.h <<\_ACEOF
-#define HAVE_NCPU_SYSCONF 1
-_ACEOF
-
- { $as_echo "$as_me:$LINENO: result: sysconf" >&5
-$as_echo "sysconf" >&6; }
-
-else
- $as_echo "$as_me: failed program was:" >&5
-sed 's/^/| /' conftest.$ac_ext >&5
-
-
-cat >conftest.$ac_ext <<_ACEOF
-/* confdefs.h. */
-_ACEOF
-cat confdefs.h >>conftest.$ac_ext
-cat >>conftest.$ac_ext <<_ACEOF
-/* end confdefs.h. */
-
-#include <sys/types.h>
-#ifdef HAVE_SYS_PARAM_H
-# include <sys/param.h>
-#endif
-#include <sys/sysctl.h>
-int
-main()
-{
- int name[2] = { CTL_HW, HW_NCPU };
- int cpus;
- size_t cpus_size = sizeof(cpus);
- sysctl(name, 2, &cpus, &cpus_size, NULL, NULL);
- return 0;
-}
-
-_ACEOF
-rm -f conftest.$ac_objext
-if { (ac_try="$ac_compile"
-case "(($ac_try" in
- *\"* | *\`* | *\\*) ac_try_echo=\$ac_try;;
- *) ac_try_echo=$ac_try;;
-esac
-eval ac_try_echo="\"\$as_me:$LINENO: $ac_try_echo\""
-$as_echo "$ac_try_echo") >&5
- (eval "$ac_compile") 2>conftest.er1
- ac_status=$?
- grep -v '^ *+' conftest.er1 >conftest.err
- rm -f conftest.er1
- cat conftest.err >&5
- $as_echo "$as_me:$LINENO: \$? = $ac_status" >&5
- (exit $ac_status); } && {
- test -z "$ac_c_werror_flag" ||
- test ! -s conftest.err
- } && test -s conftest.$ac_objext; then
-
-
-cat >>confdefs.h <<\_ACEOF
-#define HAVE_NCPU_SYSCTL 1
-_ACEOF
-
- { $as_echo "$as_me:$LINENO: result: sysctl" >&5
-$as_echo "sysctl" >&6; }
-
-else
- $as_echo "$as_me: failed program was:" >&5
-sed 's/^/| /' conftest.$ac_ext >&5
-
-
- { $as_echo "$as_me:$LINENO: result: unknown" >&5
-$as_echo "unknown" >&6; }
-
-fi
-
-rm -f core conftest.err conftest.$ac_objext conftest.$ac_ext
-fi
-
-rm -f core conftest.err conftest.$ac_objext conftest.$ac_ext
-
-
-###############################################################################
-# If using GCC, set some additional CFLAGS:
-###############################################################################
-
-Wno_uninitialized=no
-
-if test "x$GCC" = xyes ; then
- echo
- echo "GCC extensions:"
-
-
- CFLAG_VISIBILITY=
- HAVE_VISIBILITY=0
- if test -n "$GCC"; then
- { $as_echo "$as_me:$LINENO: checking for simple visibility declarations" >&5
-$as_echo_n "checking for simple visibility declarations... " >&6; }
- if test "${gl_cv_cc_visibility+set}" = set; then
- $as_echo_n "(cached) " >&6
-else
-
- gl_save_CFLAGS="$CFLAGS"
- CFLAGS="$CFLAGS -fvisibility=hidden"
- cat >conftest.$ac_ext <<_ACEOF
-/* confdefs.h. */
-_ACEOF
-cat confdefs.h >>conftest.$ac_ext
-cat >>conftest.$ac_ext <<_ACEOF
-/* end confdefs.h. */
-extern __attribute__((__visibility__("hidden"))) int hiddenvar;
- extern __attribute__((__visibility__("default"))) int exportedvar;
- extern __attribute__((__visibility__("hidden"))) int hiddenfunc (void);
- extern __attribute__((__visibility__("default"))) int exportedfunc (void);
-int
-main ()
-{
-
- ;
- return 0;
-}
-_ACEOF
-rm -f conftest.$ac_objext
-if { (ac_try="$ac_compile"
-case "(($ac_try" in
- *\"* | *\`* | *\\*) ac_try_echo=\$ac_try;;
- *) ac_try_echo=$ac_try;;
-esac
-eval ac_try_echo="\"\$as_me:$LINENO: $ac_try_echo\""
-$as_echo "$ac_try_echo") >&5
- (eval "$ac_compile") 2>conftest.er1
- ac_status=$?
- grep -v '^ *+' conftest.er1 >conftest.err
- rm -f conftest.er1
- cat conftest.err >&5
- $as_echo "$as_me:$LINENO: \$? = $ac_status" >&5
- (exit $ac_status); } && {
- test -z "$ac_c_werror_flag" ||
- test ! -s conftest.err
- } && test -s conftest.$ac_objext; then
- gl_cv_cc_visibility=yes
-else
- $as_echo "$as_me: failed program was:" >&5
-sed 's/^/| /' conftest.$ac_ext >&5
-
- gl_cv_cc_visibility=no
-fi
-
-rm -f core conftest.err conftest.$ac_objext conftest.$ac_ext
- CFLAGS="$gl_save_CFLAGS"
-fi
-
- { $as_echo "$as_me:$LINENO: result: $gl_cv_cc_visibility" >&5
-$as_echo "$gl_cv_cc_visibility" >&6; }
- if test $gl_cv_cc_visibility = yes; then
- CFLAG_VISIBILITY="-fvisibility=hidden"
- HAVE_VISIBILITY=1
- fi
- fi
-
-
-
-cat >>confdefs.h <<_ACEOF
-#define HAVE_VISIBILITY $HAVE_VISIBILITY
-_ACEOF
-
-
- if test -n "$CFLAG_VISIBILITY" ; then
- CFLAGS="$CFLAG_VISIBILITY $CFLAGS"
- fi
-
- # -Wno-uninitialized is needed with -Werror with SHA256 code
- # to omit a bogus warning.
- { $as_echo "$as_me:$LINENO: checking if $CC accepts -Wno-uninitialized" >&5
-$as_echo_n "checking if $CC accepts -Wno-uninitialized... " >&6; }
- OLD_CFLAGS="$CFLAGS"
- CFLAGS="$CFLAGS -Wno-uninitialized"
- cat >conftest.$ac_ext <<_ACEOF
-void foo(void) { }
-_ACEOF
-rm -f conftest.$ac_objext
-if { (ac_try="$ac_compile"
-case "(($ac_try" in
- *\"* | *\`* | *\\*) ac_try_echo=\$ac_try;;
- *) ac_try_echo=$ac_try;;
-esac
-eval ac_try_echo="\"\$as_me:$LINENO: $ac_try_echo\""
-$as_echo "$ac_try_echo") >&5
- (eval "$ac_compile") 2>conftest.er1
- ac_status=$?
- grep -v '^ *+' conftest.er1 >conftest.err
- rm -f conftest.er1
- cat conftest.err >&5
- $as_echo "$as_me:$LINENO: \$? = $ac_status" >&5
- (exit $ac_status); } && {
- test -z "$ac_c_werror_flag" ||
- test ! -s conftest.err
- } && test -s conftest.$ac_objext; then
- Wno_uninitialized=yes
-else
- $as_echo "$as_me: failed program was:" >&5
-sed 's/^/| /' conftest.$ac_ext >&5
-
-
-fi
-
-rm -f core conftest.err conftest.$ac_objext conftest.$ac_ext
- CFLAGS="$OLD_CFLAGS"
- { $as_echo "$as_me:$LINENO: result: $Wno_uninitialized" >&5
-$as_echo "$Wno_uninitialized" >&6; }
-
- # Enable as much warnings as possible. These commented warnings won't
- # work for this package though:
- # * -Wunreachable-code breaks several assert(0) cases, which are
- # backed up with "return LZMA_PROG_ERROR".
- # * -Wcast-qual would break various things where we need a non-const
- # pointer although we don't modify anything through it.
- # * -Wcast-align breaks optimized CRC32 and CRC64 implementation
- # on some architectures (not on x86), where this warning is bogus,
- # because we take care of correct alignment.
- # * -Winline, -Wdisabled-optimization, -Wunsafe-loop-optimizations
- # don't seem so useful here; at least the last one gives some
- # warnings which are not bugs.
- #
- # The flags are in reverse order below so they end up in "beautiful"
- # order on the actual command line.
- for NEW_FLAG in \
- -Wredundant-decls \
- -Wmissing-noreturn \
- -Wmissing-declarations \
- -Wmissing-prototypes \
- -Wold-style-definition \
- -Wstrict-prototypes \
- -Waggregate-return \
- -Wlogical-op \
- -Wwrite-strings \
- -Wbad-function-cast \
- -Wpointer-arith \
- -Wshadow \
- -Wundef \
- -Wfloat-equal \
- -Wstrict-aliasing \
- -Wmissing-include-dirs \
- -Winit-self \
- -Wformat=2 \
- -Wextra \
- -Wall
- do
- { $as_echo "$as_me:$LINENO: checking if $CC accepts $NEW_FLAG" >&5
-$as_echo_n "checking if $CC accepts $NEW_FLAG... " >&6; }
- OLD_CFLAGS="$CFLAGS"
- CFLAGS="$NEW_FLAG $CFLAGS"
- cat >conftest.$ac_ext <<_ACEOF
-void foo(void) { }
-_ACEOF
-rm -f conftest.$ac_objext
-if { (ac_try="$ac_compile"
-case "(($ac_try" in
- *\"* | *\`* | *\\*) ac_try_echo=\$ac_try;;
- *) ac_try_echo=$ac_try;;
-esac
-eval ac_try_echo="\"\$as_me:$LINENO: $ac_try_echo\""
-$as_echo "$ac_try_echo") >&5
- (eval "$ac_compile") 2>conftest.er1
- ac_status=$?
- grep -v '^ *+' conftest.er1 >conftest.err
- rm -f conftest.er1
- cat conftest.err >&5
- $as_echo "$as_me:$LINENO: \$? = $ac_status" >&5
- (exit $ac_status); } && {
- test -z "$ac_c_werror_flag" ||
- test ! -s conftest.err
- } && test -s conftest.$ac_objext; then
-
- { $as_echo "$as_me:$LINENO: result: yes" >&5
-$as_echo "yes" >&6; }
-
-else
- $as_echo "$as_me: failed program was:" >&5
-sed 's/^/| /' conftest.$ac_ext >&5
-
-
- CFLAGS="$OLD_CFLAGS"
- { $as_echo "$as_me:$LINENO: result: no" >&5
-$as_echo "no" >&6; }
-
-fi
-
-rm -f core conftest.err conftest.$ac_objext conftest.$ac_ext
- done
-
- # Check whether --enable-werror was given.
-if test "${enable_werror+set}" = set; then
- enableval=$enable_werror;
-else
- enable_werror=no
-fi
-
- if test "x$enable_werror" = "xyes"; then
- CFLAGS="-Werror $CFLAGS"
- fi
-fi
-
- if test "x$Wno_uninitialized" = "xyes"; then
- COND_WNO_UNINITIALIZED_TRUE=
- COND_WNO_UNINITIALIZED_FALSE='#'
-else
- COND_WNO_UNINITIALIZED_TRUE='#'
- COND_WNO_UNINITIALIZED_FALSE=
-fi
-
-
-
-###############################################################################
-# Create the makefiles and config.h
-###############################################################################
-
-echo
-
-# Don't build the lib directory at all if we don't need any replacement
-# functions.
- if test -n "$LIBOBJS"; then
- COND_GNULIB_TRUE=
- COND_GNULIB_FALSE='#'
-else
- COND_GNULIB_TRUE='#'
- COND_GNULIB_FALSE=
-fi
-
-
-ac_config_files="$ac_config_files Doxyfile Makefile po/Makefile.in lib/Makefile src/Makefile src/liblzma/liblzma.pc src/liblzma/Makefile src/liblzma/api/Makefile src/liblzma/common/Makefile src/liblzma/check/Makefile src/liblzma/rangecoder/Makefile src/liblzma/lz/Makefile src/liblzma/lzma/Makefile src/liblzma/subblock/Makefile src/liblzma/delta/Makefile src/liblzma/simple/Makefile src/xz/Makefile src/xzdec/Makefile src/scripts/Makefile tests/Makefile debug/Makefile"
-
-
-cat >confcache <<\_ACEOF
-# This file is a shell script that caches the results of configure
-# tests run on this system so they can be shared between configure
-# scripts and configure runs, see configure's option --config-cache.
-# It is not useful on other systems. If it contains results you don't
-# want to keep, you may remove or edit it.
-#
-# config.status only pays attention to the cache file if you give it
-# the --recheck option to rerun configure.
-#
-# `ac_cv_env_foo' variables (set or unset) will be overridden when
-# loading this file, other *unset* `ac_cv_foo' will be assigned the
-# following values.
-
-_ACEOF
-
-# The following way of writing the cache mishandles newlines in values,
-# but we know of no workaround that is simple, portable, and efficient.
-# So, we kill variables containing newlines.
-# Ultrix sh set writes to stderr and can't be redirected directly,
-# and sets the high bit in the cache file unless we assign to the vars.
-(
- for ac_var in `(set) 2>&1 | sed -n 's/^\([a-zA-Z_][a-zA-Z0-9_]*\)=.*/\1/p'`; do
- eval ac_val=\$$ac_var
- case $ac_val in #(
- *${as_nl}*)
- case $ac_var in #(
- *_cv_*) { $as_echo "$as_me:$LINENO: WARNING: Cache variable $ac_var contains a newline." >&5
-$as_echo "$as_me: WARNING: Cache variable $ac_var contains a newline." >&2;} ;;
- esac
- case $ac_var in #(
- _ | IFS | as_nl) ;; #(
- BASH_ARGV | BASH_SOURCE) eval $ac_var= ;; #(
- *) $as_unset $ac_var ;;
- esac ;;
- esac
- done
-
- (set) 2>&1 |
- case $as_nl`(ac_space=' '; set) 2>&1` in #(
- *${as_nl}ac_space=\ *)
- # `set' does not quote correctly, so add quotes (double-quote
- # substitution turns \\\\ into \\, and sed turns \\ into \).
- sed -n \
- "s/'/'\\\\''/g;
- s/^\\([_$as_cr_alnum]*_cv_[_$as_cr_alnum]*\\)=\\(.*\\)/\\1='\\2'/p"
- ;; #(
- *)
- # `set' quotes correctly as required by POSIX, so do not add quotes.
- sed -n "/^[_$as_cr_alnum]*_cv_[_$as_cr_alnum]*=/p"
- ;;
- esac |
- sort
-) |
- sed '
- /^ac_cv_env_/b end
- t clear
- :clear
- s/^\([^=]*\)=\(.*[{}].*\)$/test "${\1+set}" = set || &/
- t end
- s/^\([^=]*\)=\(.*\)$/\1=${\1=\2}/
- :end' >>confcache
-if diff "$cache_file" confcache >/dev/null 2>&1; then :; else
- if test -w "$cache_file"; then
- test "x$cache_file" != "x/dev/null" &&
- { $as_echo "$as_me:$LINENO: updating cache $cache_file" >&5
-$as_echo "$as_me: updating cache $cache_file" >&6;}
- cat confcache >$cache_file
- else
- { $as_echo "$as_me:$LINENO: not updating unwritable cache $cache_file" >&5
-$as_echo "$as_me: not updating unwritable cache $cache_file" >&6;}
- fi
-fi
-rm -f confcache
-
-test "x$prefix" = xNONE && prefix=$ac_default_prefix
-# Let make expand exec_prefix.
-test "x$exec_prefix" = xNONE && exec_prefix='${prefix}'
-
-DEFS=-DHAVE_CONFIG_H
-
-ac_libobjs=
-ac_ltlibobjs=
-for ac_i in : $LIBOBJS; do test "x$ac_i" = x: && continue
- # 1. Remove the extension, and $U if already installed.
- ac_script='s/\$U\././;s/\.o$//;s/\.obj$//'
- ac_i=`$as_echo "$ac_i" | sed "$ac_script"`
- # 2. Prepend LIBOBJDIR. When used with automake>=1.10 LIBOBJDIR
- # will be set to the directory where LIBOBJS objects are built.
- ac_libobjs="$ac_libobjs \${LIBOBJDIR}$ac_i\$U.$ac_objext"
- ac_ltlibobjs="$ac_ltlibobjs \${LIBOBJDIR}$ac_i"'$U.lo'
-done
-LIBOBJS=$ac_libobjs
-
-LTLIBOBJS=$ac_ltlibobjs
-
-
-if test -z "${COND_MAIN_ENCODER_TRUE}" && test -z "${COND_MAIN_ENCODER_FALSE}"; then
- { { $as_echo "$as_me:$LINENO: error: conditional \"COND_MAIN_ENCODER\" was never defined.
-Usually this means the macro was only invoked conditionally." >&5
-$as_echo "$as_me: error: conditional \"COND_MAIN_ENCODER\" was never defined.
-Usually this means the macro was only invoked conditionally." >&2;}
- { (exit 1); exit 1; }; }
-fi
-if test -z "${COND_MAIN_DECODER_TRUE}" && test -z "${COND_MAIN_DECODER_FALSE}"; then
- { { $as_echo "$as_me:$LINENO: error: conditional \"COND_MAIN_DECODER\" was never defined.
-Usually this means the macro was only invoked conditionally." >&5
-$as_echo "$as_me: error: conditional \"COND_MAIN_DECODER\" was never defined.
-Usually this means the macro was only invoked conditionally." >&2;}
- { (exit 1); exit 1; }; }
-fi
-if test -z "${COND_FILTER_LZMA1_TRUE}" && test -z "${COND_FILTER_LZMA1_FALSE}"; then
- { { $as_echo "$as_me:$LINENO: error: conditional \"COND_FILTER_LZMA1\" was never defined.
-Usually this means the macro was only invoked conditionally." >&5
-$as_echo "$as_me: error: conditional \"COND_FILTER_LZMA1\" was never defined.
-Usually this means the macro was only invoked conditionally." >&2;}
- { (exit 1); exit 1; }; }
-fi
-if test -z "${COND_ENCODER_LZMA1_TRUE}" && test -z "${COND_ENCODER_LZMA1_FALSE}"; then
- { { $as_echo "$as_me:$LINENO: error: conditional \"COND_ENCODER_LZMA1\" was never defined.
-Usually this means the macro was only invoked conditionally." >&5
-$as_echo "$as_me: error: conditional \"COND_ENCODER_LZMA1\" was never defined.
-Usually this means the macro was only invoked conditionally." >&2;}
- { (exit 1); exit 1; }; }
-fi
-if test -z "${COND_DECODER_LZMA1_TRUE}" && test -z "${COND_DECODER_LZMA1_FALSE}"; then
- { { $as_echo "$as_me:$LINENO: error: conditional \"COND_DECODER_LZMA1\" was never defined.
-Usually this means the macro was only invoked conditionally." >&5
-$as_echo "$as_me: error: conditional \"COND_DECODER_LZMA1\" was never defined.
-Usually this means the macro was only invoked conditionally." >&2;}
- { (exit 1); exit 1; }; }
-fi
-if test -z "${COND_FILTER_LZMA2_TRUE}" && test -z "${COND_FILTER_LZMA2_FALSE}"; then
- { { $as_echo "$as_me:$LINENO: error: conditional \"COND_FILTER_LZMA2\" was never defined.
-Usually this means the macro was only invoked conditionally." >&5
-$as_echo "$as_me: error: conditional \"COND_FILTER_LZMA2\" was never defined.
-Usually this means the macro was only invoked conditionally." >&2;}
- { (exit 1); exit 1; }; }
-fi
-if test -z "${COND_ENCODER_LZMA2_TRUE}" && test -z "${COND_ENCODER_LZMA2_FALSE}"; then
- { { $as_echo "$as_me:$LINENO: error: conditional \"COND_ENCODER_LZMA2\" was never defined.
-Usually this means the macro was only invoked conditionally." >&5
-$as_echo "$as_me: error: conditional \"COND_ENCODER_LZMA2\" was never defined.
-Usually this means the macro was only invoked conditionally." >&2;}
- { (exit 1); exit 1; }; }
-fi
-if test -z "${COND_DECODER_LZMA2_TRUE}" && test -z "${COND_DECODER_LZMA2_FALSE}"; then
- { { $as_echo "$as_me:$LINENO: error: conditional \"COND_DECODER_LZMA2\" was never defined.
-Usually this means the macro was only invoked conditionally." >&5
-$as_echo "$as_me: error: conditional \"COND_DECODER_LZMA2\" was never defined.
-Usually this means the macro was only invoked conditionally." >&2;}
- { (exit 1); exit 1; }; }
-fi
-if test -z "${COND_FILTER_SUBBLOCK_TRUE}" && test -z "${COND_FILTER_SUBBLOCK_FALSE}"; then
- { { $as_echo "$as_me:$LINENO: error: conditional \"COND_FILTER_SUBBLOCK\" was never defined.
-Usually this means the macro was only invoked conditionally." >&5
-$as_echo "$as_me: error: conditional \"COND_FILTER_SUBBLOCK\" was never defined.
-Usually this means the macro was only invoked conditionally." >&2;}
- { (exit 1); exit 1; }; }
-fi
-if test -z "${COND_ENCODER_SUBBLOCK_TRUE}" && test -z "${COND_ENCODER_SUBBLOCK_FALSE}"; then
- { { $as_echo "$as_me:$LINENO: error: conditional \"COND_ENCODER_SUBBLOCK\" was never defined.
-Usually this means the macro was only invoked conditionally." >&5
-$as_echo "$as_me: error: conditional \"COND_ENCODER_SUBBLOCK\" was never defined.
-Usually this means the macro was only invoked conditionally." >&2;}
- { (exit 1); exit 1; }; }
-fi
-if test -z "${COND_DECODER_SUBBLOCK_TRUE}" && test -z "${COND_DECODER_SUBBLOCK_FALSE}"; then
- { { $as_echo "$as_me:$LINENO: error: conditional \"COND_DECODER_SUBBLOCK\" was never defined.
-Usually this means the macro was only invoked conditionally." >&5
-$as_echo "$as_me: error: conditional \"COND_DECODER_SUBBLOCK\" was never defined.
-Usually this means the macro was only invoked conditionally." >&2;}
- { (exit 1); exit 1; }; }
-fi
-if test -z "${COND_FILTER_DELTA_TRUE}" && test -z "${COND_FILTER_DELTA_FALSE}"; then
- { { $as_echo "$as_me:$LINENO: error: conditional \"COND_FILTER_DELTA\" was never defined.
-Usually this means the macro was only invoked conditionally." >&5
-$as_echo "$as_me: error: conditional \"COND_FILTER_DELTA\" was never defined.
-Usually this means the macro was only invoked conditionally." >&2;}
- { (exit 1); exit 1; }; }
-fi
-if test -z "${COND_ENCODER_DELTA_TRUE}" && test -z "${COND_ENCODER_DELTA_FALSE}"; then
- { { $as_echo "$as_me:$LINENO: error: conditional \"COND_ENCODER_DELTA\" was never defined.
-Usually this means the macro was only invoked conditionally." >&5
-$as_echo "$as_me: error: conditional \"COND_ENCODER_DELTA\" was never defined.
-Usually this means the macro was only invoked conditionally." >&2;}
- { (exit 1); exit 1; }; }
-fi
-if test -z "${COND_DECODER_DELTA_TRUE}" && test -z "${COND_DECODER_DELTA_FALSE}"; then
- { { $as_echo "$as_me:$LINENO: error: conditional \"COND_DECODER_DELTA\" was never defined.
-Usually this means the macro was only invoked conditionally." >&5
-$as_echo "$as_me: error: conditional \"COND_DECODER_DELTA\" was never defined.
-Usually this means the macro was only invoked conditionally." >&2;}
- { (exit 1); exit 1; }; }
-fi
-if test -z "${COND_FILTER_X86_TRUE}" && test -z "${COND_FILTER_X86_FALSE}"; then
- { { $as_echo "$as_me:$LINENO: error: conditional \"COND_FILTER_X86\" was never defined.
-Usually this means the macro was only invoked conditionally." >&5
-$as_echo "$as_me: error: conditional \"COND_FILTER_X86\" was never defined.
-Usually this means the macro was only invoked conditionally." >&2;}
- { (exit 1); exit 1; }; }
-fi
-if test -z "${COND_ENCODER_X86_TRUE}" && test -z "${COND_ENCODER_X86_FALSE}"; then
- { { $as_echo "$as_me:$LINENO: error: conditional \"COND_ENCODER_X86\" was never defined.
-Usually this means the macro was only invoked conditionally." >&5
-$as_echo "$as_me: error: conditional \"COND_ENCODER_X86\" was never defined.
-Usually this means the macro was only invoked conditionally." >&2;}
- { (exit 1); exit 1; }; }
-fi
-if test -z "${COND_DECODER_X86_TRUE}" && test -z "${COND_DECODER_X86_FALSE}"; then
- { { $as_echo "$as_me:$LINENO: error: conditional \"COND_DECODER_X86\" was never defined.
-Usually this means the macro was only invoked conditionally." >&5
-$as_echo "$as_me: error: conditional \"COND_DECODER_X86\" was never defined.
-Usually this means the macro was only invoked conditionally." >&2;}
- { (exit 1); exit 1; }; }
-fi
-if test -z "${COND_FILTER_POWERPC_TRUE}" && test -z "${COND_FILTER_POWERPC_FALSE}"; then
- { { $as_echo "$as_me:$LINENO: error: conditional \"COND_FILTER_POWERPC\" was never defined.
-Usually this means the macro was only invoked conditionally." >&5
-$as_echo "$as_me: error: conditional \"COND_FILTER_POWERPC\" was never defined.
-Usually this means the macro was only invoked conditionally." >&2;}
- { (exit 1); exit 1; }; }
-fi
-if test -z "${COND_ENCODER_POWERPC_TRUE}" && test -z "${COND_ENCODER_POWERPC_FALSE}"; then
- { { $as_echo "$as_me:$LINENO: error: conditional \"COND_ENCODER_POWERPC\" was never defined.
-Usually this means the macro was only invoked conditionally." >&5
-$as_echo "$as_me: error: conditional \"COND_ENCODER_POWERPC\" was never defined.
-Usually this means the macro was only invoked conditionally." >&2;}
- { (exit 1); exit 1; }; }
-fi
-if test -z "${COND_DECODER_POWERPC_TRUE}" && test -z "${COND_DECODER_POWERPC_FALSE}"; then
- { { $as_echo "$as_me:$LINENO: error: conditional \"COND_DECODER_POWERPC\" was never defined.
-Usually this means the macro was only invoked conditionally." >&5
-$as_echo "$as_me: error: conditional \"COND_DECODER_POWERPC\" was never defined.
-Usually this means the macro was only invoked conditionally." >&2;}
- { (exit 1); exit 1; }; }
-fi
-if test -z "${COND_FILTER_IA64_TRUE}" && test -z "${COND_FILTER_IA64_FALSE}"; then
- { { $as_echo "$as_me:$LINENO: error: conditional \"COND_FILTER_IA64\" was never defined.
-Usually this means the macro was only invoked conditionally." >&5
-$as_echo "$as_me: error: conditional \"COND_FILTER_IA64\" was never defined.
-Usually this means the macro was only invoked conditionally." >&2;}
- { (exit 1); exit 1; }; }
-fi
-if test -z "${COND_ENCODER_IA64_TRUE}" && test -z "${COND_ENCODER_IA64_FALSE}"; then
- { { $as_echo "$as_me:$LINENO: error: conditional \"COND_ENCODER_IA64\" was never defined.
-Usually this means the macro was only invoked conditionally." >&5
-$as_echo "$as_me: error: conditional \"COND_ENCODER_IA64\" was never defined.
-Usually this means the macro was only invoked conditionally." >&2;}
- { (exit 1); exit 1; }; }
-fi
-if test -z "${COND_DECODER_IA64_TRUE}" && test -z "${COND_DECODER_IA64_FALSE}"; then
- { { $as_echo "$as_me:$LINENO: error: conditional \"COND_DECODER_IA64\" was never defined.
-Usually this means the macro was only invoked conditionally." >&5
-$as_echo "$as_me: error: conditional \"COND_DECODER_IA64\" was never defined.
-Usually this means the macro was only invoked conditionally." >&2;}
- { (exit 1); exit 1; }; }
-fi
-if test -z "${COND_FILTER_ARM_TRUE}" && test -z "${COND_FILTER_ARM_FALSE}"; then
- { { $as_echo "$as_me:$LINENO: error: conditional \"COND_FILTER_ARM\" was never defined.
-Usually this means the macro was only invoked conditionally." >&5
-$as_echo "$as_me: error: conditional \"COND_FILTER_ARM\" was never defined.
-Usually this means the macro was only invoked conditionally." >&2;}
- { (exit 1); exit 1; }; }
-fi
-if test -z "${COND_ENCODER_ARM_TRUE}" && test -z "${COND_ENCODER_ARM_FALSE}"; then
- { { $as_echo "$as_me:$LINENO: error: conditional \"COND_ENCODER_ARM\" was never defined.
-Usually this means the macro was only invoked conditionally." >&5
-$as_echo "$as_me: error: conditional \"COND_ENCODER_ARM\" was never defined.
-Usually this means the macro was only invoked conditionally." >&2;}
- { (exit 1); exit 1; }; }
-fi
-if test -z "${COND_DECODER_ARM_TRUE}" && test -z "${COND_DECODER_ARM_FALSE}"; then
- { { $as_echo "$as_me:$LINENO: error: conditional \"COND_DECODER_ARM\" was never defined.
-Usually this means the macro was only invoked conditionally." >&5
-$as_echo "$as_me: error: conditional \"COND_DECODER_ARM\" was never defined.
-Usually this means the macro was only invoked conditionally." >&2;}
- { (exit 1); exit 1; }; }
-fi
-if test -z "${COND_FILTER_ARMTHUMB_TRUE}" && test -z "${COND_FILTER_ARMTHUMB_FALSE}"; then
- { { $as_echo "$as_me:$LINENO: error: conditional \"COND_FILTER_ARMTHUMB\" was never defined.
-Usually this means the macro was only invoked conditionally." >&5
-$as_echo "$as_me: error: conditional \"COND_FILTER_ARMTHUMB\" was never defined.
-Usually this means the macro was only invoked conditionally." >&2;}
- { (exit 1); exit 1; }; }
-fi
-if test -z "${COND_ENCODER_ARMTHUMB_TRUE}" && test -z "${COND_ENCODER_ARMTHUMB_FALSE}"; then
- { { $as_echo "$as_me:$LINENO: error: conditional \"COND_ENCODER_ARMTHUMB\" was never defined.
-Usually this means the macro was only invoked conditionally." >&5
-$as_echo "$as_me: error: conditional \"COND_ENCODER_ARMTHUMB\" was never defined.
-Usually this means the macro was only invoked conditionally." >&2;}
- { (exit 1); exit 1; }; }
-fi
-if test -z "${COND_DECODER_ARMTHUMB_TRUE}" && test -z "${COND_DECODER_ARMTHUMB_FALSE}"; then
- { { $as_echo "$as_me:$LINENO: error: conditional \"COND_DECODER_ARMTHUMB\" was never defined.
-Usually this means the macro was only invoked conditionally." >&5
-$as_echo "$as_me: error: conditional \"COND_DECODER_ARMTHUMB\" was never defined.
-Usually this means the macro was only invoked conditionally." >&2;}
- { (exit 1); exit 1; }; }
-fi
-if test -z "${COND_FILTER_SPARC_TRUE}" && test -z "${COND_FILTER_SPARC_FALSE}"; then
- { { $as_echo "$as_me:$LINENO: error: conditional \"COND_FILTER_SPARC\" was never defined.
-Usually this means the macro was only invoked conditionally." >&5
-$as_echo "$as_me: error: conditional \"COND_FILTER_SPARC\" was never defined.
-Usually this means the macro was only invoked conditionally." >&2;}
- { (exit 1); exit 1; }; }
-fi
-if test -z "${COND_ENCODER_SPARC_TRUE}" && test -z "${COND_ENCODER_SPARC_FALSE}"; then
- { { $as_echo "$as_me:$LINENO: error: conditional \"COND_ENCODER_SPARC\" was never defined.
-Usually this means the macro was only invoked conditionally." >&5
-$as_echo "$as_me: error: conditional \"COND_ENCODER_SPARC\" was never defined.
-Usually this means the macro was only invoked conditionally." >&2;}
- { (exit 1); exit 1; }; }
-fi
-if test -z "${COND_DECODER_SPARC_TRUE}" && test -z "${COND_DECODER_SPARC_FALSE}"; then
- { { $as_echo "$as_me:$LINENO: error: conditional \"COND_DECODER_SPARC\" was never defined.
-Usually this means the macro was only invoked conditionally." >&5
-$as_echo "$as_me: error: conditional \"COND_DECODER_SPARC\" was never defined.
-Usually this means the macro was only invoked conditionally." >&2;}
- { (exit 1); exit 1; }; }
-fi
-if test -z "${COND_FILTER_SIMPLE_TRUE}" && test -z "${COND_FILTER_SIMPLE_FALSE}"; then
- { { $as_echo "$as_me:$LINENO: error: conditional \"COND_FILTER_SIMPLE\" was never defined.
-Usually this means the macro was only invoked conditionally." >&5
-$as_echo "$as_me: error: conditional \"COND_FILTER_SIMPLE\" was never defined.
-Usually this means the macro was only invoked conditionally." >&2;}
- { (exit 1); exit 1; }; }
-fi
-if test -z "${COND_ENCODER_SIMPLE_TRUE}" && test -z "${COND_ENCODER_SIMPLE_FALSE}"; then
- { { $as_echo "$as_me:$LINENO: error: conditional \"COND_ENCODER_SIMPLE\" was never defined.
-Usually this means the macro was only invoked conditionally." >&5
-$as_echo "$as_me: error: conditional \"COND_ENCODER_SIMPLE\" was never defined.
-Usually this means the macro was only invoked conditionally." >&2;}
- { (exit 1); exit 1; }; }
-fi
-if test -z "${COND_DECODER_SIMPLE_TRUE}" && test -z "${COND_DECODER_SIMPLE_FALSE}"; then
- { { $as_echo "$as_me:$LINENO: error: conditional \"COND_DECODER_SIMPLE\" was never defined.
-Usually this means the macro was only invoked conditionally." >&5
-$as_echo "$as_me: error: conditional \"COND_DECODER_SIMPLE\" was never defined.
-Usually this means the macro was only invoked conditionally." >&2;}
- { (exit 1); exit 1; }; }
-fi
-if test -z "${COND_FILTER_LZ_TRUE}" && test -z "${COND_FILTER_LZ_FALSE}"; then
- { { $as_echo "$as_me:$LINENO: error: conditional \"COND_FILTER_LZ\" was never defined.
-Usually this means the macro was only invoked conditionally." >&5
-$as_echo "$as_me: error: conditional \"COND_FILTER_LZ\" was never defined.
-Usually this means the macro was only invoked conditionally." >&2;}
- { (exit 1); exit 1; }; }
-fi
-if test -z "${COND_ENCODER_LZ_TRUE}" && test -z "${COND_ENCODER_LZ_FALSE}"; then
- { { $as_echo "$as_me:$LINENO: error: conditional \"COND_ENCODER_LZ\" was never defined.
-Usually this means the macro was only invoked conditionally." >&5
-$as_echo "$as_me: error: conditional \"COND_ENCODER_LZ\" was never defined.
-Usually this means the macro was only invoked conditionally." >&2;}
- { (exit 1); exit 1; }; }
-fi
-if test -z "${COND_DECODER_LZ_TRUE}" && test -z "${COND_DECODER_LZ_FALSE}"; then
- { { $as_echo "$as_me:$LINENO: error: conditional \"COND_DECODER_LZ\" was never defined.
-Usually this means the macro was only invoked conditionally." >&5
-$as_echo "$as_me: error: conditional \"COND_DECODER_LZ\" was never defined.
-Usually this means the macro was only invoked conditionally." >&2;}
- { (exit 1); exit 1; }; }
-fi
-if test -z "${COND_CHECK_CRC32_TRUE}" && test -z "${COND_CHECK_CRC32_FALSE}"; then
- { { $as_echo "$as_me:$LINENO: error: conditional \"COND_CHECK_CRC32\" was never defined.
-Usually this means the macro was only invoked conditionally." >&5
-$as_echo "$as_me: error: conditional \"COND_CHECK_CRC32\" was never defined.
-Usually this means the macro was only invoked conditionally." >&2;}
- { (exit 1); exit 1; }; }
-fi
-if test -z "${COND_CHECK_CRC64_TRUE}" && test -z "${COND_CHECK_CRC64_FALSE}"; then
- { { $as_echo "$as_me:$LINENO: error: conditional \"COND_CHECK_CRC64\" was never defined.
-Usually this means the macro was only invoked conditionally." >&5
-$as_echo "$as_me: error: conditional \"COND_CHECK_CRC64\" was never defined.
-Usually this means the macro was only invoked conditionally." >&2;}
- { (exit 1); exit 1; }; }
-fi
-if test -z "${COND_CHECK_SHA256_TRUE}" && test -z "${COND_CHECK_SHA256_FALSE}"; then
- { { $as_echo "$as_me:$LINENO: error: conditional \"COND_CHECK_SHA256\" was never defined.
-Usually this means the macro was only invoked conditionally." >&5
-$as_echo "$as_me: error: conditional \"COND_CHECK_SHA256\" was never defined.
-Usually this means the macro was only invoked conditionally." >&2;}
- { (exit 1); exit 1; }; }
-fi
-if test -z "${COND_ASM_X86_TRUE}" && test -z "${COND_ASM_X86_FALSE}"; then
- { { $as_echo "$as_me:$LINENO: error: conditional \"COND_ASM_X86\" was never defined.
-Usually this means the macro was only invoked conditionally." >&5
-$as_echo "$as_me: error: conditional \"COND_ASM_X86\" was never defined.
-Usually this means the macro was only invoked conditionally." >&2;}
- { (exit 1); exit 1; }; }
-fi
-if test -z "${COND_ASM_X86_64_TRUE}" && test -z "${COND_ASM_X86_64_FALSE}"; then
- { { $as_echo "$as_me:$LINENO: error: conditional \"COND_ASM_X86_64\" was never defined.
-Usually this means the macro was only invoked conditionally." >&5
-$as_echo "$as_me: error: conditional \"COND_ASM_X86_64\" was never defined.
-Usually this means the macro was only invoked conditionally." >&2;}
- { (exit 1); exit 1; }; }
-fi
-if test -z "${COND_SMALL_TRUE}" && test -z "${COND_SMALL_FALSE}"; then
- { { $as_echo "$as_me:$LINENO: error: conditional \"COND_SMALL\" was never defined.
-Usually this means the macro was only invoked conditionally." >&5
-$as_echo "$as_me: error: conditional \"COND_SMALL\" was never defined.
-Usually this means the macro was only invoked conditionally." >&2;}
- { (exit 1); exit 1; }; }
-fi
-if test -z "${AMDEP_TRUE}" && test -z "${AMDEP_FALSE}"; then
- { { $as_echo "$as_me:$LINENO: error: conditional \"AMDEP\" was never defined.
-Usually this means the macro was only invoked conditionally." >&5
-$as_echo "$as_me: error: conditional \"AMDEP\" was never defined.
-Usually this means the macro was only invoked conditionally." >&2;}
- { (exit 1); exit 1; }; }
-fi
-if test -z "${am__fastdepCC_TRUE}" && test -z "${am__fastdepCC_FALSE}"; then
- { { $as_echo "$as_me:$LINENO: error: conditional \"am__fastdepCC\" was never defined.
-Usually this means the macro was only invoked conditionally." >&5
-$as_echo "$as_me: error: conditional \"am__fastdepCC\" was never defined.
-Usually this means the macro was only invoked conditionally." >&2;}
- { (exit 1); exit 1; }; }
-fi
-if test -z "${am__fastdepCCAS_TRUE}" && test -z "${am__fastdepCCAS_FALSE}"; then
- { { $as_echo "$as_me:$LINENO: error: conditional \"am__fastdepCCAS\" was never defined.
-Usually this means the macro was only invoked conditionally." >&5
-$as_echo "$as_me: error: conditional \"am__fastdepCCAS\" was never defined.
-Usually this means the macro was only invoked conditionally." >&2;}
- { (exit 1); exit 1; }; }
-fi
-if test -z "${am__fastdepCXX_TRUE}" && test -z "${am__fastdepCXX_FALSE}"; then
- { { $as_echo "$as_me:$LINENO: error: conditional \"am__fastdepCXX\" was never defined.
-Usually this means the macro was only invoked conditionally." >&5
-$as_echo "$as_me: error: conditional \"am__fastdepCXX\" was never defined.
-Usually this means the macro was only invoked conditionally." >&2;}
- { (exit 1); exit 1; }; }
-fi
-if test -z "${COND_WNO_UNINITIALIZED_TRUE}" && test -z "${COND_WNO_UNINITIALIZED_FALSE}"; then
- { { $as_echo "$as_me:$LINENO: error: conditional \"COND_WNO_UNINITIALIZED\" was never defined.
-Usually this means the macro was only invoked conditionally." >&5
-$as_echo "$as_me: error: conditional \"COND_WNO_UNINITIALIZED\" was never defined.
-Usually this means the macro was only invoked conditionally." >&2;}
- { (exit 1); exit 1; }; }
-fi
-if test -z "${COND_GNULIB_TRUE}" && test -z "${COND_GNULIB_FALSE}"; then
- { { $as_echo "$as_me:$LINENO: error: conditional \"COND_GNULIB\" was never defined.
-Usually this means the macro was only invoked conditionally." >&5
-$as_echo "$as_me: error: conditional \"COND_GNULIB\" was never defined.
-Usually this means the macro was only invoked conditionally." >&2;}
- { (exit 1); exit 1; }; }
-fi
-
-: ${CONFIG_STATUS=./config.status}
-ac_write_fail=0
-ac_clean_files_save=$ac_clean_files
-ac_clean_files="$ac_clean_files $CONFIG_STATUS"
-{ $as_echo "$as_me:$LINENO: creating $CONFIG_STATUS" >&5
-$as_echo "$as_me: creating $CONFIG_STATUS" >&6;}
-cat >$CONFIG_STATUS <<_ACEOF || ac_write_fail=1
-#! $SHELL
-# Generated by $as_me.
-# Run this file to recreate the current configuration.
-# Compiler output produced by configure, useful for debugging
-# configure, is in config.log if it exists.
-
-debug=false
-ac_cs_recheck=false
-ac_cs_silent=false
-SHELL=\${CONFIG_SHELL-$SHELL}
-_ACEOF
-
-cat >>$CONFIG_STATUS <<\_ACEOF || ac_write_fail=1
-## --------------------- ##
-## M4sh Initialization. ##
-## --------------------- ##
-
-# Be more Bourne compatible
-DUALCASE=1; export DUALCASE # for MKS sh
-if test -n "${ZSH_VERSION+set}" && (emulate sh) >/dev/null 2>&1; then
- emulate sh
- NULLCMD=:
- # Pre-4.2 versions of Zsh do word splitting on ${1+"$@"}, which
- # is contrary to our usage. Disable this feature.
- alias -g '${1+"$@"}'='"$@"'
- setopt NO_GLOB_SUBST
-else
- case `(set -o) 2>/dev/null` in
- *posix*) set -o posix ;;
-esac
-
-fi
-
-
-
-
-# PATH needs CR
-# Avoid depending upon Character Ranges.
-as_cr_letters='abcdefghijklmnopqrstuvwxyz'
-as_cr_LETTERS='ABCDEFGHIJKLMNOPQRSTUVWXYZ'
-as_cr_Letters=$as_cr_letters$as_cr_LETTERS
-as_cr_digits='0123456789'
-as_cr_alnum=$as_cr_Letters$as_cr_digits
-
-as_nl='
-'
-export as_nl
-# Printing a long string crashes Solaris 7 /usr/bin/printf.
-as_echo='\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\'
-as_echo=$as_echo$as_echo$as_echo$as_echo$as_echo
-as_echo=$as_echo$as_echo$as_echo$as_echo$as_echo$as_echo
-if (test "X`printf %s $as_echo`" = "X$as_echo") 2>/dev/null; then
- as_echo='printf %s\n'
- as_echo_n='printf %s'
-else
- if test "X`(/usr/ucb/echo -n -n $as_echo) 2>/dev/null`" = "X-n $as_echo"; then
- as_echo_body='eval /usr/ucb/echo -n "$1$as_nl"'
- as_echo_n='/usr/ucb/echo -n'
- else
- as_echo_body='eval expr "X$1" : "X\\(.*\\)"'
- as_echo_n_body='eval
- arg=$1;
- case $arg in
- *"$as_nl"*)
- expr "X$arg" : "X\\(.*\\)$as_nl";
- arg=`expr "X$arg" : ".*$as_nl\\(.*\\)"`;;
- esac;
- expr "X$arg" : "X\\(.*\\)" | tr -d "$as_nl"
- '
- export as_echo_n_body
- as_echo_n='sh -c $as_echo_n_body as_echo'
- fi
- export as_echo_body
- as_echo='sh -c $as_echo_body as_echo'
-fi
-
-# The user is always right.
-if test "${PATH_SEPARATOR+set}" != set; then
- PATH_SEPARATOR=:
- (PATH='/bin;/bin'; FPATH=$PATH; sh -c :) >/dev/null 2>&1 && {
- (PATH='/bin:/bin'; FPATH=$PATH; sh -c :) >/dev/null 2>&1 ||
- PATH_SEPARATOR=';'
- }
-fi
-
-# Support unset when possible.
-if ( (MAIL=60; unset MAIL) || exit) >/dev/null 2>&1; then
- as_unset=unset
-else
- as_unset=false
-fi
-
-
-# IFS
-# We need space, tab and new line, in precisely that order. Quoting is
-# there to prevent editors from complaining about space-tab.
-# (If _AS_PATH_WALK were called with IFS unset, it would disable word
-# splitting by setting IFS to empty value.)
-IFS=" "" $as_nl"
-
-# Find who we are. Look in the path if we contain no directory separator.
-case $0 in
- *[\\/]* ) as_myself=$0 ;;
- *) as_save_IFS=$IFS; IFS=$PATH_SEPARATOR
-for as_dir in $PATH
-do
- IFS=$as_save_IFS
- test -z "$as_dir" && as_dir=.
- test -r "$as_dir/$0" && as_myself=$as_dir/$0 && break
-done
-IFS=$as_save_IFS
-
- ;;
-esac
-# We did not find ourselves, most probably we were run as `sh COMMAND'
-# in which case we are not to be found in the path.
-if test "x$as_myself" = x; then
- as_myself=$0
-fi
-if test ! -f "$as_myself"; then
- $as_echo "$as_myself: error: cannot find myself; rerun with an absolute file name" >&2
- { (exit 1); exit 1; }
-fi
-
-# Work around bugs in pre-3.0 UWIN ksh.
-for as_var in ENV MAIL MAILPATH
-do ($as_unset $as_var) >/dev/null 2>&1 && $as_unset $as_var
-done
-PS1='$ '
-PS2='> '
-PS4='+ '
-
-# NLS nuisances.
-LC_ALL=C
-export LC_ALL
-LANGUAGE=C
-export LANGUAGE
-
-# Required to use basename.
-if expr a : '\(a\)' >/dev/null 2>&1 &&
- test "X`expr 00001 : '.*\(...\)'`" = X001; then
- as_expr=expr
-else
- as_expr=false
-fi
-
-if (basename -- /) >/dev/null 2>&1 && test "X`basename -- / 2>&1`" = "X/"; then
- as_basename=basename
-else
- as_basename=false
-fi
-
-
-# Name of the executable.
-as_me=`$as_basename -- "$0" ||
-$as_expr X/"$0" : '.*/\([^/][^/]*\)/*$' \| \
- X"$0" : 'X\(//\)$' \| \
- X"$0" : 'X\(/\)' \| . 2>/dev/null ||
-$as_echo X/"$0" |
- sed '/^.*\/\([^/][^/]*\)\/*$/{
- s//\1/
- q
- }
- /^X\/\(\/\/\)$/{
- s//\1/
- q
- }
- /^X\/\(\/\).*/{
- s//\1/
- q
- }
- s/.*/./; q'`
-
-# CDPATH.
-$as_unset CDPATH
-
-
-
- as_lineno_1=$LINENO
- as_lineno_2=$LINENO
- test "x$as_lineno_1" != "x$as_lineno_2" &&
- test "x`expr $as_lineno_1 + 1`" = "x$as_lineno_2" || {
-
- # Create $as_me.lineno as a copy of $as_myself, but with $LINENO
- # uniformly replaced by the line number. The first 'sed' inserts a
- # line-number line after each line using $LINENO; the second 'sed'
- # does the real work. The second script uses 'N' to pair each
- # line-number line with the line containing $LINENO, and appends
- # trailing '-' during substitution so that $LINENO is not a special
- # case at line end.
- # (Raja R Harinath suggested sed '=', and Paul Eggert wrote the
- # scripts with optimization help from Paolo Bonzini. Blame Lee
- # E. McMahon (1931-1989) for sed's syntax. :-)
- sed -n '
- p
- /[$]LINENO/=
- ' <$as_myself |
- sed '
- s/[$]LINENO.*/&-/
- t lineno
- b
- :lineno
- N
- :loop
- s/[$]LINENO\([^'$as_cr_alnum'_].*\n\)\(.*\)/\2\1\2/
- t loop
- s/-\n.*//
- ' >$as_me.lineno &&
- chmod +x "$as_me.lineno" ||
- { $as_echo "$as_me: error: cannot create $as_me.lineno; rerun with a POSIX shell" >&2
- { (exit 1); exit 1; }; }
-
- # Don't try to exec as it changes $[0], causing all sort of problems
- # (the dirname of $[0] is not the place where we might find the
- # original and so on. Autoconf is especially sensitive to this).
- . "./$as_me.lineno"
- # Exit status is that of the last command.
- exit
-}
-
-
-if (as_dir=`dirname -- /` && test "X$as_dir" = X/) >/dev/null 2>&1; then
- as_dirname=dirname
-else
- as_dirname=false
-fi
-
-ECHO_C= ECHO_N= ECHO_T=
-case `echo -n x` in
--n*)
- case `echo 'x\c'` in
- *c*) ECHO_T=' ';; # ECHO_T is single tab character.
- *) ECHO_C='\c';;
- esac;;
-*)
- ECHO_N='-n';;
-esac
-if expr a : '\(a\)' >/dev/null 2>&1 &&
- test "X`expr 00001 : '.*\(...\)'`" = X001; then
- as_expr=expr
-else
- as_expr=false
-fi
-
-rm -f conf$$ conf$$.exe conf$$.file
-if test -d conf$$.dir; then
- rm -f conf$$.dir/conf$$.file
-else
- rm -f conf$$.dir
- mkdir conf$$.dir 2>/dev/null
-fi
-if (echo >conf$$.file) 2>/dev/null; then
- if ln -s conf$$.file conf$$ 2>/dev/null; then
- as_ln_s='ln -s'
- # ... but there are two gotchas:
- # 1) On MSYS, both `ln -s file dir' and `ln file dir' fail.
- # 2) DJGPP < 2.04 has no symlinks; `ln -s' creates a wrapper executable.
- # In both cases, we have to default to `cp -p'.
- ln -s conf$$.file conf$$.dir 2>/dev/null && test ! -f conf$$.exe ||
- as_ln_s='cp -p'
- elif ln conf$$.file conf$$ 2>/dev/null; then
- as_ln_s=ln
- else
- as_ln_s='cp -p'
- fi
-else
- as_ln_s='cp -p'
-fi
-rm -f conf$$ conf$$.exe conf$$.dir/conf$$.file conf$$.file
-rmdir conf$$.dir 2>/dev/null
-
-if mkdir -p . 2>/dev/null; then
- as_mkdir_p=:
-else
- test -d ./-p && rmdir ./-p
- as_mkdir_p=false
-fi
-
-if test -x / >/dev/null 2>&1; then
- as_test_x='test -x'
-else
- if ls -dL / >/dev/null 2>&1; then
- as_ls_L_option=L
- else
- as_ls_L_option=
- fi
- as_test_x='
- eval sh -c '\''
- if test -d "$1"; then
- test -d "$1/.";
- else
- case $1 in
- -*)set "./$1";;
- esac;
- case `ls -ld'$as_ls_L_option' "$1" 2>/dev/null` in
- ???[sx]*):;;*)false;;esac;fi
- '\'' sh
- '
-fi
-as_executable_p=$as_test_x
-
-# Sed expression to map a string onto a valid CPP name.
-as_tr_cpp="eval sed 'y%*$as_cr_letters%P$as_cr_LETTERS%;s%[^_$as_cr_alnum]%_%g'"
-
-# Sed expression to map a string onto a valid variable name.
-as_tr_sh="eval sed 'y%*+%pp%;s%[^_$as_cr_alnum]%_%g'"
-
-
-exec 6>&1
-
-# Save the log message, to keep $[0] and so on meaningful, and to
-# report actual input values of CONFIG_FILES etc. instead of their
-# values after options handling.
-ac_log="
-This file was extended by XZ Utils $as_me 4.999.8beta, which was
-generated by GNU Autoconf 2.62. Invocation command line was
-
- CONFIG_FILES = $CONFIG_FILES
- CONFIG_HEADERS = $CONFIG_HEADERS
- CONFIG_LINKS = $CONFIG_LINKS
- CONFIG_COMMANDS = $CONFIG_COMMANDS
- $ $0 $@
-
-on `(hostname || uname -n) 2>/dev/null | sed 1q`
-"
-
-_ACEOF
-
-cat >>$CONFIG_STATUS <<_ACEOF || ac_write_fail=1
-# Files that config.status was made for.
-config_files="$ac_config_files"
-config_headers="$ac_config_headers"
-config_commands="$ac_config_commands"
-
-_ACEOF
-
-cat >>$CONFIG_STATUS <<\_ACEOF || ac_write_fail=1
-ac_cs_usage="\
-\`$as_me' instantiates files from templates according to the
-current configuration.
-
-Usage: $0 [OPTIONS] [FILE]...
-
- -h, --help print this help, then exit
- -V, --version print version number and configuration settings, then exit
- -q, --quiet do not print progress messages
- -d, --debug don't remove temporary files
- --recheck update $as_me by reconfiguring in the same conditions
- --file=FILE[:TEMPLATE]
- instantiate the configuration file FILE
- --header=FILE[:TEMPLATE]
- instantiate the configuration header FILE
-
-Configuration files:
-$config_files
-
-Configuration headers:
-$config_headers
-
-Configuration commands:
-$config_commands
-
-Report bugs to <bug-autoconf@gnu.org>."
-
-_ACEOF
-cat >>$CONFIG_STATUS <<_ACEOF || ac_write_fail=1
-ac_cs_version="\\
-XZ Utils config.status 4.999.8beta
-configured by $0, generated by GNU Autoconf 2.62,
- with options \\"`$as_echo "$ac_configure_args" | sed 's/^ //; s/[\\""\`\$]/\\\\&/g'`\\"
-
-Copyright (C) 2008 Free Software Foundation, Inc.
-This config.status script is free software; the Free Software Foundation
-gives unlimited permission to copy, distribute and modify it."
-
-ac_pwd='$ac_pwd'
-srcdir='$srcdir'
-INSTALL='$INSTALL'
-MKDIR_P='$MKDIR_P'
-AWK='$AWK'
-test -n "\$AWK" || AWK=awk
-_ACEOF
-
-cat >>$CONFIG_STATUS <<\_ACEOF || ac_write_fail=1
-# The default lists apply if the user does not specify any file.
-ac_need_defaults=:
-while test $# != 0
-do
- case $1 in
- --*=*)
- ac_option=`expr "X$1" : 'X\([^=]*\)='`
- ac_optarg=`expr "X$1" : 'X[^=]*=\(.*\)'`
- ac_shift=:
- ;;
- *)
- ac_option=$1
- ac_optarg=$2
- ac_shift=shift
- ;;
- esac
-
- case $ac_option in
- # Handling of the options.
- -recheck | --recheck | --rechec | --reche | --rech | --rec | --re | --r)
- ac_cs_recheck=: ;;
- --version | --versio | --versi | --vers | --ver | --ve | --v | -V )
- $as_echo "$ac_cs_version"; exit ;;
- --debug | --debu | --deb | --de | --d | -d )
- debug=: ;;
- --file | --fil | --fi | --f )
- $ac_shift
- case $ac_optarg in
- *\'*) ac_optarg=`$as_echo "$ac_optarg" | sed "s/'/'\\\\\\\\''/g"` ;;
- esac
- CONFIG_FILES="$CONFIG_FILES '$ac_optarg'"
- ac_need_defaults=false;;
- --header | --heade | --head | --hea )
- $ac_shift
- case $ac_optarg in
- *\'*) ac_optarg=`$as_echo "$ac_optarg" | sed "s/'/'\\\\\\\\''/g"` ;;
- esac
- CONFIG_HEADERS="$CONFIG_HEADERS '$ac_optarg'"
- ac_need_defaults=false;;
- --he | --h)
- # Conflict between --help and --header
- { $as_echo "$as_me: error: ambiguous option: $1
-Try \`$0 --help' for more information." >&2
- { (exit 1); exit 1; }; };;
- --help | --hel | -h )
- $as_echo "$ac_cs_usage"; exit ;;
- -q | -quiet | --quiet | --quie | --qui | --qu | --q \
- | -silent | --silent | --silen | --sile | --sil | --si | --s)
- ac_cs_silent=: ;;
-
- # This is an error.
- -*) { $as_echo "$as_me: error: unrecognized option: $1
-Try \`$0 --help' for more information." >&2
- { (exit 1); exit 1; }; } ;;
-
- *) ac_config_targets="$ac_config_targets $1"
- ac_need_defaults=false ;;
-
- esac
- shift
-done
-
-ac_configure_extra_args=
-
-if $ac_cs_silent; then
- exec 6>/dev/null
- ac_configure_extra_args="$ac_configure_extra_args --silent"
-fi
-
-_ACEOF
-cat >>$CONFIG_STATUS <<_ACEOF || ac_write_fail=1
-if \$ac_cs_recheck; then
- set X '$SHELL' '$0' $ac_configure_args \$ac_configure_extra_args --no-create --no-recursion
- shift
- \$as_echo "running CONFIG_SHELL=$SHELL \$*" >&6
- CONFIG_SHELL='$SHELL'
- export CONFIG_SHELL
- exec "\$@"
-fi
-
-_ACEOF
-cat >>$CONFIG_STATUS <<\_ACEOF || ac_write_fail=1
-exec 5>>config.log
-{
- echo
- sed 'h;s/./-/g;s/^.../## /;s/...$/ ##/;p;x;p;x' <<_ASBOX
-## Running $as_me. ##
-_ASBOX
- $as_echo "$ac_log"
-} >&5
-
-_ACEOF
-cat >>$CONFIG_STATUS <<_ACEOF || ac_write_fail=1
-#
-# INIT-COMMANDS
-#
-AMDEP_TRUE="$AMDEP_TRUE" ac_aux_dir="$ac_aux_dir"
-# Capture the value of obsolete ALL_LINGUAS because we need it to compute
- # POFILES, UPDATEPOFILES, DUMMYPOFILES, GMOFILES, CATALOGS. But hide it
- # from automake < 1.5.
- eval 'OBSOLETE_ALL_LINGUAS''="$ALL_LINGUAS"'
- # Capture the value of LINGUAS because we need it to compute CATALOGS.
- LINGUAS="${LINGUAS-%UNSET%}"
-
-
-_ACEOF
-
-cat >>$CONFIG_STATUS <<\_ACEOF || ac_write_fail=1
-
-# Handling of arguments.
-for ac_config_target in $ac_config_targets
-do
- case $ac_config_target in
- "config.h") CONFIG_HEADERS="$CONFIG_HEADERS config.h" ;;
- "depfiles") CONFIG_COMMANDS="$CONFIG_COMMANDS depfiles" ;;
- "po-directories") CONFIG_COMMANDS="$CONFIG_COMMANDS po-directories" ;;
- "Doxyfile") CONFIG_FILES="$CONFIG_FILES Doxyfile" ;;
- "Makefile") CONFIG_FILES="$CONFIG_FILES Makefile" ;;
- "po/Makefile.in") CONFIG_FILES="$CONFIG_FILES po/Makefile.in" ;;
- "lib/Makefile") CONFIG_FILES="$CONFIG_FILES lib/Makefile" ;;
- "src/Makefile") CONFIG_FILES="$CONFIG_FILES src/Makefile" ;;
- "src/liblzma/liblzma.pc") CONFIG_FILES="$CONFIG_FILES src/liblzma/liblzma.pc" ;;
- "src/liblzma/Makefile") CONFIG_FILES="$CONFIG_FILES src/liblzma/Makefile" ;;
- "src/liblzma/api/Makefile") CONFIG_FILES="$CONFIG_FILES src/liblzma/api/Makefile" ;;
- "src/liblzma/common/Makefile") CONFIG_FILES="$CONFIG_FILES src/liblzma/common/Makefile" ;;
- "src/liblzma/check/Makefile") CONFIG_FILES="$CONFIG_FILES src/liblzma/check/Makefile" ;;
- "src/liblzma/rangecoder/Makefile") CONFIG_FILES="$CONFIG_FILES src/liblzma/rangecoder/Makefile" ;;
- "src/liblzma/lz/Makefile") CONFIG_FILES="$CONFIG_FILES src/liblzma/lz/Makefile" ;;
- "src/liblzma/lzma/Makefile") CONFIG_FILES="$CONFIG_FILES src/liblzma/lzma/Makefile" ;;
- "src/liblzma/subblock/Makefile") CONFIG_FILES="$CONFIG_FILES src/liblzma/subblock/Makefile" ;;
- "src/liblzma/delta/Makefile") CONFIG_FILES="$CONFIG_FILES src/liblzma/delta/Makefile" ;;
- "src/liblzma/simple/Makefile") CONFIG_FILES="$CONFIG_FILES src/liblzma/simple/Makefile" ;;
- "src/xz/Makefile") CONFIG_FILES="$CONFIG_FILES src/xz/Makefile" ;;
- "src/xzdec/Makefile") CONFIG_FILES="$CONFIG_FILES src/xzdec/Makefile" ;;
- "src/scripts/Makefile") CONFIG_FILES="$CONFIG_FILES src/scripts/Makefile" ;;
- "tests/Makefile") CONFIG_FILES="$CONFIG_FILES tests/Makefile" ;;
- "debug/Makefile") CONFIG_FILES="$CONFIG_FILES debug/Makefile" ;;
-
- *) { { $as_echo "$as_me:$LINENO: error: invalid argument: $ac_config_target" >&5
-$as_echo "$as_me: error: invalid argument: $ac_config_target" >&2;}
- { (exit 1); exit 1; }; };;
- esac
-done
-
-
-# If the user did not use the arguments to specify the items to instantiate,
-# then the envvar interface is used. Set only those that are not.
-# We use the long form for the default assignment because of an extremely
-# bizarre bug on SunOS 4.1.3.
-if $ac_need_defaults; then
- test "${CONFIG_FILES+set}" = set || CONFIG_FILES=$config_files
- test "${CONFIG_HEADERS+set}" = set || CONFIG_HEADERS=$config_headers
- test "${CONFIG_COMMANDS+set}" = set || CONFIG_COMMANDS=$config_commands
-fi
-
-# Have a temporary directory for convenience. Make it in the build tree
-# simply because there is no reason against having it here, and in addition,
-# creating and moving files from /tmp can sometimes cause problems.
-# Hook for its removal unless debugging.
-# Note that there is a small window in which the directory will not be cleaned:
-# after its creation but before its name has been assigned to `$tmp'.
-$debug ||
-{
- tmp=
- trap 'exit_status=$?
- { test -z "$tmp" || test ! -d "$tmp" || rm -fr "$tmp"; } && exit $exit_status
-' 0
- trap '{ (exit 1); exit 1; }' 1 2 13 15
-}
-# Create a (secure) tmp directory for tmp files.
-
-{
- tmp=`(umask 077 && mktemp -d "./confXXXXXX") 2>/dev/null` &&
- test -n "$tmp" && test -d "$tmp"
-} ||
-{
- tmp=./conf$$-$RANDOM
- (umask 077 && mkdir "$tmp")
-} ||
-{
- $as_echo "$as_me: cannot create a temporary directory in ." >&2
- { (exit 1); exit 1; }
-}
-
-# Set up the scripts for CONFIG_FILES section.
-# No need to generate them if there are no CONFIG_FILES.
-# This happens for instance with `./config.status config.h'.
-if test -n "$CONFIG_FILES"; then
-
-
-ac_cr=' '
-ac_cs_awk_cr=`$AWK 'BEGIN { print "a\rb" }' </dev/null 2>/dev/null`
-if test "$ac_cs_awk_cr" = "a${ac_cr}b"; then
- ac_cs_awk_cr='\\r'
-else
- ac_cs_awk_cr=$ac_cr
-fi
-
-echo 'BEGIN {' >"$tmp/subs1.awk" &&
-_ACEOF
-
-
-{
- echo "cat >conf$$subs.awk <<_ACEOF" &&
- echo "$ac_subst_vars" | sed 's/.*/&!$&$ac_delim/' &&
- echo "_ACEOF"
-} >conf$$subs.sh ||
- { { $as_echo "$as_me:$LINENO: error: could not make $CONFIG_STATUS" >&5
-$as_echo "$as_me: error: could not make $CONFIG_STATUS" >&2;}
- { (exit 1); exit 1; }; }
-ac_delim_num=`echo "$ac_subst_vars" | grep -c '$'`
-ac_delim='%!_!# '
-for ac_last_try in false false false false false :; do
- . ./conf$$subs.sh ||
- { { $as_echo "$as_me:$LINENO: error: could not make $CONFIG_STATUS" >&5
-$as_echo "$as_me: error: could not make $CONFIG_STATUS" >&2;}
- { (exit 1); exit 1; }; }
-
- if test `sed -n "s/.*$ac_delim\$/X/p" conf$$subs.awk | grep -c X` = $ac_delim_num; then
- break
- elif $ac_last_try; then
- { { $as_echo "$as_me:$LINENO: error: could not make $CONFIG_STATUS" >&5
-$as_echo "$as_me: error: could not make $CONFIG_STATUS" >&2;}
- { (exit 1); exit 1; }; }
- else
- ac_delim="$ac_delim!$ac_delim _$ac_delim!! "
- fi
-done
-rm -f conf$$subs.sh
-
-cat >>$CONFIG_STATUS <<_ACEOF || ac_write_fail=1
-cat >>"\$tmp/subs1.awk" <<\\_ACAWK &&
-_ACEOF
-sed -n '
-h
-s/^/S["/; s/!.*/"]=/
-p
-g
-s/^[^!]*!//
-:repl
-t repl
-s/'"$ac_delim"'$//
-t delim
-:nl
-h
-s/\(.\{148\}\).*/\1/
-t more1
-s/["\\]/\\&/g; s/^/"/; s/$/\\n"\\/
-p
-n
-b repl
-:more1
-s/["\\]/\\&/g; s/^/"/; s/$/"\\/
-p
-g
-s/.\{148\}//
-t nl
-:delim
-h
-s/\(.\{148\}\).*/\1/
-t more2
-s/["\\]/\\&/g; s/^/"/; s/$/"/
-p
-b
-:more2
-s/["\\]/\\&/g; s/^/"/; s/$/"\\/
-p
-g
-s/.\{148\}//
-t delim
-' <conf$$subs.awk | sed '
-/^[^""]/{
- N
- s/\n//
-}
-' >>$CONFIG_STATUS || ac_write_fail=1
-rm -f conf$$subs.awk
-cat >>$CONFIG_STATUS <<_ACEOF || ac_write_fail=1
-_ACAWK
-cat >>"\$tmp/subs1.awk" <<_ACAWK &&
- for (key in S) S_is_set[key] = 1
- FS = ""
-
-}
-{
- line = $ 0
- nfields = split(line, field, "@")
- substed = 0
- len = length(field[1])
- for (i = 2; i < nfields; i++) {
- key = field[i]
- keylen = length(key)
- if (S_is_set[key]) {
- value = S[key]
- line = substr(line, 1, len) "" value "" substr(line, len + keylen + 3)
- len += length(value) + length(field[++i])
- substed = 1
- } else
- len += 1 + keylen
- }
-
- print line
-}
-
-_ACAWK
-_ACEOF
-cat >>$CONFIG_STATUS <<\_ACEOF || ac_write_fail=1
-if sed "s/$ac_cr//" < /dev/null > /dev/null 2>&1; then
- sed "s/$ac_cr\$//; s/$ac_cr/$ac_cs_awk_cr/g"
-else
- cat
-fi < "$tmp/subs1.awk" > "$tmp/subs.awk" \
- || { { $as_echo "$as_me:$LINENO: error: could not setup config files machinery" >&5
-$as_echo "$as_me: error: could not setup config files machinery" >&2;}
- { (exit 1); exit 1; }; }
-_ACEOF
-
-# VPATH may cause trouble with some makes, so we remove $(srcdir),
-# ${srcdir} and @srcdir@ from VPATH if srcdir is ".", strip leading and
-# trailing colons and then remove the whole line if VPATH becomes empty
-# (actually we leave an empty line to preserve line numbers).
-if test "x$srcdir" = x.; then
- ac_vpsub='/^[ ]*VPATH[ ]*=/{
-s/:*\$(srcdir):*/:/
-s/:*\${srcdir}:*/:/
-s/:*@srcdir@:*/:/
-s/^\([^=]*=[ ]*\):*/\1/
-s/:*$//
-s/^[^=]*=[ ]*$//
-}'
-fi
-
-cat >>$CONFIG_STATUS <<\_ACEOF || ac_write_fail=1
-fi # test -n "$CONFIG_FILES"
-
-# Set up the scripts for CONFIG_HEADERS section.
-# No need to generate them if there are no CONFIG_HEADERS.
-# This happens for instance with `./config.status Makefile'.
-if test -n "$CONFIG_HEADERS"; then
-cat >"$tmp/defines.awk" <<\_ACAWK ||
-BEGIN {
-_ACEOF
-
-# Transform confdefs.h into an awk script `defines.awk', embedded as
-# here-document in config.status, that substitutes the proper values into
-# config.h.in to produce config.h.
-
-# Create a delimiter string that does not exist in confdefs.h, to ease
-# handling of long lines.
-ac_delim='%!_!# '
-for ac_last_try in false false :; do
- ac_t=`sed -n "/$ac_delim/p" confdefs.h`
- if test -z "$ac_t"; then
- break
- elif $ac_last_try; then
- { { $as_echo "$as_me:$LINENO: error: could not make $CONFIG_HEADERS" >&5
-$as_echo "$as_me: error: could not make $CONFIG_HEADERS" >&2;}
- { (exit 1); exit 1; }; }
- else
- ac_delim="$ac_delim!$ac_delim _$ac_delim!! "
- fi
-done
-
-# For the awk script, D is an array of macro values keyed by name,
-# likewise P contains macro parameters if any. Preserve backslash
-# newline sequences.
-
-ac_word_re=[_$as_cr_Letters][_$as_cr_alnum]*
-sed -n '
-s/.\{148\}/&'"$ac_delim"'/g
-t rset
-:rset
-s/^[ ]*#[ ]*define[ ][ ]*/ /
-t def
-d
-:def
-s/\\$//
-t bsnl
-s/["\\]/\\&/g
-s/^ \('"$ac_word_re"'\)\(([^()]*)\)[ ]*\(.*\)/P["\1"]="\2"\
-D["\1"]=" \3"/p
-s/^ \('"$ac_word_re"'\)[ ]*\(.*\)/D["\1"]=" \2"/p
-d
-:bsnl
-s/["\\]/\\&/g
-s/^ \('"$ac_word_re"'\)\(([^()]*)\)[ ]*\(.*\)/P["\1"]="\2"\
-D["\1"]=" \3\\\\\\n"\\/p
-t cont
-s/^ \('"$ac_word_re"'\)[ ]*\(.*\)/D["\1"]=" \2\\\\\\n"\\/p
-t cont
-d
-:cont
-n
-s/.\{148\}/&'"$ac_delim"'/g
-t clear
-:clear
-s/\\$//
-t bsnlc
-s/["\\]/\\&/g; s/^/"/; s/$/"/p
-d
-:bsnlc
-s/["\\]/\\&/g; s/^/"/; s/$/\\\\\\n"\\/p
-b cont
-' <confdefs.h | sed '
-s/'"$ac_delim"'/"\\\
-"/g' >>$CONFIG_STATUS || ac_write_fail=1
-
-cat >>$CONFIG_STATUS <<_ACEOF || ac_write_fail=1
- for (key in D) D_is_set[key] = 1
- FS = ""
-}
-/^[\t ]*#[\t ]*(define|undef)[\t ]+$ac_word_re([\t (]|\$)/ {
- line = \$ 0
- split(line, arg, " ")
- if (arg[1] == "#") {
- defundef = arg[2]
- mac1 = arg[3]
- } else {
- defundef = substr(arg[1], 2)
- mac1 = arg[2]
- }
- split(mac1, mac2, "(") #)
- macro = mac2[1]
- if (D_is_set[macro]) {
- # Preserve the white space surrounding the "#".
- prefix = substr(line, 1, index(line, defundef) - 1)
- print prefix "define", macro P[macro] D[macro]
- next
- } else {
- # Replace #undef with comments. This is necessary, for example,
- # in the case of _POSIX_SOURCE, which is predefined and required
- # on some systems where configure will not decide to define it.
- if (defundef == "undef") {
- print "/*", line, "*/"
- next
- }
- }
-}
-{ print }
-_ACAWK
-_ACEOF
-cat >>$CONFIG_STATUS <<\_ACEOF || ac_write_fail=1
- { { $as_echo "$as_me:$LINENO: error: could not setup config headers machinery" >&5
-$as_echo "$as_me: error: could not setup config headers machinery" >&2;}
- { (exit 1); exit 1; }; }
-fi # test -n "$CONFIG_HEADERS"
-
-
-eval set X " :F $CONFIG_FILES :H $CONFIG_HEADERS :C $CONFIG_COMMANDS"
-shift
-for ac_tag
-do
- case $ac_tag in
- :[FHLC]) ac_mode=$ac_tag; continue;;
- esac
- case $ac_mode$ac_tag in
- :[FHL]*:*);;
- :L* | :C*:*) { { $as_echo "$as_me:$LINENO: error: Invalid tag $ac_tag." >&5
-$as_echo "$as_me: error: Invalid tag $ac_tag." >&2;}
- { (exit 1); exit 1; }; };;
- :[FH]-) ac_tag=-:-;;
- :[FH]*) ac_tag=$ac_tag:$ac_tag.in;;
- esac
- ac_save_IFS=$IFS
- IFS=:
- set x $ac_tag
- IFS=$ac_save_IFS
- shift
- ac_file=$1
- shift
-
- case $ac_mode in
- :L) ac_source=$1;;
- :[FH])
- ac_file_inputs=
- for ac_f
- do
- case $ac_f in
- -) ac_f="$tmp/stdin";;
- *) # Look for the file first in the build tree, then in the source tree
- # (if the path is not absolute). The absolute path cannot be DOS-style,
- # because $ac_f cannot contain `:'.
- test -f "$ac_f" ||
- case $ac_f in
- [\\/$]*) false;;
- *) test -f "$srcdir/$ac_f" && ac_f="$srcdir/$ac_f";;
- esac ||
- { { $as_echo "$as_me:$LINENO: error: cannot find input file: $ac_f" >&5
-$as_echo "$as_me: error: cannot find input file: $ac_f" >&2;}
- { (exit 1); exit 1; }; };;
- esac
- case $ac_f in *\'*) ac_f=`$as_echo "$ac_f" | sed "s/'/'\\\\\\\\''/g"`;; esac
- ac_file_inputs="$ac_file_inputs '$ac_f'"
- done
-
- # Let's still pretend it is `configure' which instantiates (i.e., don't
- # use $as_me), people would be surprised to read:
- # /* config.h. Generated by config.status. */
- configure_input='Generated from '`
- $as_echo "$*" | sed 's|^[^:]*/||;s|:[^:]*/|, |g'
- `' by configure.'
- if test x"$ac_file" != x-; then
- configure_input="$ac_file. $configure_input"
- { $as_echo "$as_me:$LINENO: creating $ac_file" >&5
-$as_echo "$as_me: creating $ac_file" >&6;}
- fi
- # Neutralize special characters interpreted by sed in replacement strings.
- case $configure_input in #(
- *\&* | *\|* | *\\* )
- ac_sed_conf_input=`$as_echo "$configure_input" |
- sed 's/[\\\\&|]/\\\\&/g'`;; #(
- *) ac_sed_conf_input=$configure_input;;
- esac
-
- case $ac_tag in
- *:-:* | *:-) cat >"$tmp/stdin" \
- || { { $as_echo "$as_me:$LINENO: error: could not create $ac_file" >&5
-$as_echo "$as_me: error: could not create $ac_file" >&2;}
- { (exit 1); exit 1; }; } ;;
- esac
- ;;
- esac
-
- ac_dir=`$as_dirname -- "$ac_file" ||
-$as_expr X"$ac_file" : 'X\(.*[^/]\)//*[^/][^/]*/*$' \| \
- X"$ac_file" : 'X\(//\)[^/]' \| \
- X"$ac_file" : 'X\(//\)$' \| \
- X"$ac_file" : 'X\(/\)' \| . 2>/dev/null ||
-$as_echo X"$ac_file" |
- sed '/^X\(.*[^/]\)\/\/*[^/][^/]*\/*$/{
- s//\1/
- q
- }
- /^X\(\/\/\)[^/].*/{
- s//\1/
- q
- }
- /^X\(\/\/\)$/{
- s//\1/
- q
- }
- /^X\(\/\).*/{
- s//\1/
- q
- }
- s/.*/./; q'`
- { as_dir="$ac_dir"
- case $as_dir in #(
- -*) as_dir=./$as_dir;;
- esac
- test -d "$as_dir" || { $as_mkdir_p && mkdir -p "$as_dir"; } || {
- as_dirs=
- while :; do
- case $as_dir in #(
- *\'*) as_qdir=`$as_echo "$as_dir" | sed "s/'/'\\\\\\\\''/g"`;; #'(
- *) as_qdir=$as_dir;;
- esac
- as_dirs="'$as_qdir' $as_dirs"
- as_dir=`$as_dirname -- "$as_dir" ||
-$as_expr X"$as_dir" : 'X\(.*[^/]\)//*[^/][^/]*/*$' \| \
- X"$as_dir" : 'X\(//\)[^/]' \| \
- X"$as_dir" : 'X\(//\)$' \| \
- X"$as_dir" : 'X\(/\)' \| . 2>/dev/null ||
-$as_echo X"$as_dir" |
- sed '/^X\(.*[^/]\)\/\/*[^/][^/]*\/*$/{
- s//\1/
- q
- }
- /^X\(\/\/\)[^/].*/{
- s//\1/
- q
- }
- /^X\(\/\/\)$/{
- s//\1/
- q
- }
- /^X\(\/\).*/{
- s//\1/
- q
- }
- s/.*/./; q'`
- test -d "$as_dir" && break
- done
- test -z "$as_dirs" || eval "mkdir $as_dirs"
- } || test -d "$as_dir" || { { $as_echo "$as_me:$LINENO: error: cannot create directory $as_dir" >&5
-$as_echo "$as_me: error: cannot create directory $as_dir" >&2;}
- { (exit 1); exit 1; }; }; }
- ac_builddir=.
-
-case "$ac_dir" in
-.) ac_dir_suffix= ac_top_builddir_sub=. ac_top_build_prefix= ;;
-*)
- ac_dir_suffix=/`$as_echo "$ac_dir" | sed 's|^\.[\\/]||'`
- # A ".." for each directory in $ac_dir_suffix.
- ac_top_builddir_sub=`$as_echo "$ac_dir_suffix" | sed 's|/[^\\/]*|/..|g;s|/||'`
- case $ac_top_builddir_sub in
- "") ac_top_builddir_sub=. ac_top_build_prefix= ;;
- *) ac_top_build_prefix=$ac_top_builddir_sub/ ;;
- esac ;;
-esac
-ac_abs_top_builddir=$ac_pwd
-ac_abs_builddir=$ac_pwd$ac_dir_suffix
-# for backward compatibility:
-ac_top_builddir=$ac_top_build_prefix
-
-case $srcdir in
- .) # We are building in place.
- ac_srcdir=.
- ac_top_srcdir=$ac_top_builddir_sub
- ac_abs_top_srcdir=$ac_pwd ;;
- [\\/]* | ?:[\\/]* ) # Absolute name.
- ac_srcdir=$srcdir$ac_dir_suffix;
- ac_top_srcdir=$srcdir
- ac_abs_top_srcdir=$srcdir ;;
- *) # Relative name.
- ac_srcdir=$ac_top_build_prefix$srcdir$ac_dir_suffix
- ac_top_srcdir=$ac_top_build_prefix$srcdir
- ac_abs_top_srcdir=$ac_pwd/$srcdir ;;
-esac
-ac_abs_srcdir=$ac_abs_top_srcdir$ac_dir_suffix
-
-
- case $ac_mode in
- :F)
- #
- # CONFIG_FILE
- #
-
- case $INSTALL in
- [\\/$]* | ?:[\\/]* ) ac_INSTALL=$INSTALL ;;
- *) ac_INSTALL=$ac_top_build_prefix$INSTALL ;;
- esac
- ac_MKDIR_P=$MKDIR_P
- case $MKDIR_P in
- [\\/$]* | ?:[\\/]* ) ;;
- */*) ac_MKDIR_P=$ac_top_build_prefix$MKDIR_P ;;
- esac
-_ACEOF
-
-cat >>$CONFIG_STATUS <<\_ACEOF || ac_write_fail=1
-# If the template does not know about datarootdir, expand it.
-# FIXME: This hack should be removed a few years after 2.60.
-ac_datarootdir_hack=; ac_datarootdir_seen=
-
-ac_sed_dataroot='
-/datarootdir/ {
- p
- q
-}
-/@datadir@/p
-/@docdir@/p
-/@infodir@/p
-/@localedir@/p
-/@mandir@/p
-'
-case `eval "sed -n \"\$ac_sed_dataroot\" $ac_file_inputs"` in
-*datarootdir*) ac_datarootdir_seen=yes;;
-*@datadir@*|*@docdir@*|*@infodir@*|*@localedir@*|*@mandir@*)
- { $as_echo "$as_me:$LINENO: WARNING: $ac_file_inputs seems to ignore the --datarootdir setting" >&5
-$as_echo "$as_me: WARNING: $ac_file_inputs seems to ignore the --datarootdir setting" >&2;}
-_ACEOF
-cat >>$CONFIG_STATUS <<_ACEOF || ac_write_fail=1
- ac_datarootdir_hack='
- s&@datadir@&$datadir&g
- s&@docdir@&$docdir&g
- s&@infodir@&$infodir&g
- s&@localedir@&$localedir&g
- s&@mandir@&$mandir&g
- s&\\\${datarootdir}&$datarootdir&g' ;;
-esac
-_ACEOF
-
-# Neutralize VPATH when `$srcdir' = `.'.
-# Shell code in configure.ac might set extrasub.
-# FIXME: do we really want to maintain this feature?
-cat >>$CONFIG_STATUS <<_ACEOF || ac_write_fail=1
-ac_sed_extra="$ac_vpsub
-$extrasub
-_ACEOF
-cat >>$CONFIG_STATUS <<\_ACEOF || ac_write_fail=1
-:t
-/@[a-zA-Z_][a-zA-Z_0-9]*@/!b
-s|@configure_input@|$ac_sed_conf_input|;t t
-s&@top_builddir@&$ac_top_builddir_sub&;t t
-s&@top_build_prefix@&$ac_top_build_prefix&;t t
-s&@srcdir@&$ac_srcdir&;t t
-s&@abs_srcdir@&$ac_abs_srcdir&;t t
-s&@top_srcdir@&$ac_top_srcdir&;t t
-s&@abs_top_srcdir@&$ac_abs_top_srcdir&;t t
-s&@builddir@&$ac_builddir&;t t
-s&@abs_builddir@&$ac_abs_builddir&;t t
-s&@abs_top_builddir@&$ac_abs_top_builddir&;t t
-s&@INSTALL@&$ac_INSTALL&;t t
-s&@MKDIR_P@&$ac_MKDIR_P&;t t
-$ac_datarootdir_hack
-"
-eval sed \"\$ac_sed_extra\" "$ac_file_inputs" | $AWK -f "$tmp/subs.awk" >$tmp/out \
- || { { $as_echo "$as_me:$LINENO: error: could not create $ac_file" >&5
-$as_echo "$as_me: error: could not create $ac_file" >&2;}
- { (exit 1); exit 1; }; }
-
-test -z "$ac_datarootdir_hack$ac_datarootdir_seen" &&
- { ac_out=`sed -n '/\${datarootdir}/p' "$tmp/out"`; test -n "$ac_out"; } &&
- { ac_out=`sed -n '/^[ ]*datarootdir[ ]*:*=/p' "$tmp/out"`; test -z "$ac_out"; } &&
- { $as_echo "$as_me:$LINENO: WARNING: $ac_file contains a reference to the variable \`datarootdir'
-which seems to be undefined. Please make sure it is defined." >&5
-$as_echo "$as_me: WARNING: $ac_file contains a reference to the variable \`datarootdir'
-which seems to be undefined. Please make sure it is defined." >&2;}
-
- rm -f "$tmp/stdin"
- case $ac_file in
- -) cat "$tmp/out" && rm -f "$tmp/out";;
- *) rm -f "$ac_file" && mv "$tmp/out" "$ac_file";;
- esac \
- || { { $as_echo "$as_me:$LINENO: error: could not create $ac_file" >&5
-$as_echo "$as_me: error: could not create $ac_file" >&2;}
- { (exit 1); exit 1; }; }
- ;;
- :H)
- #
- # CONFIG_HEADER
- #
- if test x"$ac_file" != x-; then
- {
- $as_echo "/* $configure_input */" \
- && eval '$AWK -f "$tmp/defines.awk"' "$ac_file_inputs"
- } >"$tmp/config.h" \
- || { { $as_echo "$as_me:$LINENO: error: could not create $ac_file" >&5
-$as_echo "$as_me: error: could not create $ac_file" >&2;}
- { (exit 1); exit 1; }; }
- if diff "$ac_file" "$tmp/config.h" >/dev/null 2>&1; then
- { $as_echo "$as_me:$LINENO: $ac_file is unchanged" >&5
-$as_echo "$as_me: $ac_file is unchanged" >&6;}
- else
- rm -f "$ac_file"
- mv "$tmp/config.h" "$ac_file" \
- || { { $as_echo "$as_me:$LINENO: error: could not create $ac_file" >&5
-$as_echo "$as_me: error: could not create $ac_file" >&2;}
- { (exit 1); exit 1; }; }
- fi
- else
- $as_echo "/* $configure_input */" \
- && eval '$AWK -f "$tmp/defines.awk"' "$ac_file_inputs" \
- || { { $as_echo "$as_me:$LINENO: error: could not create -" >&5
-$as_echo "$as_me: error: could not create -" >&2;}
- { (exit 1); exit 1; }; }
- fi
-# Compute "$ac_file"'s index in $config_headers.
-_am_arg="$ac_file"
-_am_stamp_count=1
-for _am_header in $config_headers :; do
- case $_am_header in
- $_am_arg | $_am_arg:* )
- break ;;
- * )
- _am_stamp_count=`expr $_am_stamp_count + 1` ;;
- esac
-done
-echo "timestamp for $_am_arg" >`$as_dirname -- "$_am_arg" ||
-$as_expr X"$_am_arg" : 'X\(.*[^/]\)//*[^/][^/]*/*$' \| \
- X"$_am_arg" : 'X\(//\)[^/]' \| \
- X"$_am_arg" : 'X\(//\)$' \| \
- X"$_am_arg" : 'X\(/\)' \| . 2>/dev/null ||
-$as_echo X"$_am_arg" |
- sed '/^X\(.*[^/]\)\/\/*[^/][^/]*\/*$/{
- s//\1/
- q
- }
- /^X\(\/\/\)[^/].*/{
- s//\1/
- q
- }
- /^X\(\/\/\)$/{
- s//\1/
- q
- }
- /^X\(\/\).*/{
- s//\1/
- q
- }
- s/.*/./; q'`/stamp-h$_am_stamp_count
- ;;
-
- :C) { $as_echo "$as_me:$LINENO: executing $ac_file commands" >&5
-$as_echo "$as_me: executing $ac_file commands" >&6;}
- ;;
- esac
-
-
- case $ac_file$ac_mode in
- "depfiles":C) test x"$AMDEP_TRUE" != x"" || # Autoconf 2.62 quotes --file arguments for eval, but not when files
-# are listed without --file. Let's play safe and only enable the eval
-# if we detect the quoting.
-case $CONFIG_FILES in
-*\'*) eval set x "$CONFIG_FILES" ;;
-*) set x $CONFIG_FILES ;;
-esac
-shift
-for mf
-do
- # Strip MF so we end up with the name of the file.
- mf=`echo "$mf" | sed -e 's/:.*$//'`
- # Check whether this is an Automake generated Makefile or not.
- # We used to match only the files named `Makefile.in', but
- # some people rename them; so instead we look at the file content.
- # Grep'ing the first line is not enough: some people post-process
- # each Makefile.in and add a new line on top of each file to say so.
- # Grep'ing the whole file is not good either: AIX grep has a line
- # limit of 2048, but all sed's we know have understand at least 4000.
- if sed -n 's,^#.*generated by automake.*,X,p' "$mf" | grep X >/dev/null 2>&1; then
- dirpart=`$as_dirname -- "$mf" ||
-$as_expr X"$mf" : 'X\(.*[^/]\)//*[^/][^/]*/*$' \| \
- X"$mf" : 'X\(//\)[^/]' \| \
- X"$mf" : 'X\(//\)$' \| \
- X"$mf" : 'X\(/\)' \| . 2>/dev/null ||
-$as_echo X"$mf" |
- sed '/^X\(.*[^/]\)\/\/*[^/][^/]*\/*$/{
- s//\1/
- q
- }
- /^X\(\/\/\)[^/].*/{
- s//\1/
- q
- }
- /^X\(\/\/\)$/{
- s//\1/
- q
- }
- /^X\(\/\).*/{
- s//\1/
- q
- }
- s/.*/./; q'`
- else
- continue
- fi
- # Extract the definition of DEPDIR, am__include, and am__quote
- # from the Makefile without running `make'.
- DEPDIR=`sed -n 's/^DEPDIR = //p' < "$mf"`
- test -z "$DEPDIR" && continue
- am__include=`sed -n 's/^am__include = //p' < "$mf"`
- test -z "am__include" && continue
- am__quote=`sed -n 's/^am__quote = //p' < "$mf"`
- # When using ansi2knr, U may be empty or an underscore; expand it
- U=`sed -n 's/^U = //p' < "$mf"`
- # Find all dependency output files, they are included files with
- # $(DEPDIR) in their names. We invoke sed twice because it is the
- # simplest approach to changing $(DEPDIR) to its actual value in the
- # expansion.
- for file in `sed -n "
- s/^$am__include $am__quote\(.*(DEPDIR).*\)$am__quote"'$/\1/p' <"$mf" | \
- sed -e 's/\$(DEPDIR)/'"$DEPDIR"'/g' -e 's/\$U/'"$U"'/g'`; do
- # Make sure the directory exists.
- test -f "$dirpart/$file" && continue
- fdir=`$as_dirname -- "$file" ||
-$as_expr X"$file" : 'X\(.*[^/]\)//*[^/][^/]*/*$' \| \
- X"$file" : 'X\(//\)[^/]' \| \
- X"$file" : 'X\(//\)$' \| \
- X"$file" : 'X\(/\)' \| . 2>/dev/null ||
-$as_echo X"$file" |
- sed '/^X\(.*[^/]\)\/\/*[^/][^/]*\/*$/{
- s//\1/
- q
- }
- /^X\(\/\/\)[^/].*/{
- s//\1/
- q
- }
- /^X\(\/\/\)$/{
- s//\1/
- q
- }
- /^X\(\/\).*/{
- s//\1/
- q
- }
- s/.*/./; q'`
- { as_dir=$dirpart/$fdir
- case $as_dir in #(
- -*) as_dir=./$as_dir;;
- esac
- test -d "$as_dir" || { $as_mkdir_p && mkdir -p "$as_dir"; } || {
- as_dirs=
- while :; do
- case $as_dir in #(
- *\'*) as_qdir=`$as_echo "$as_dir" | sed "s/'/'\\\\\\\\''/g"`;; #'(
- *) as_qdir=$as_dir;;
- esac
- as_dirs="'$as_qdir' $as_dirs"
- as_dir=`$as_dirname -- "$as_dir" ||
-$as_expr X"$as_dir" : 'X\(.*[^/]\)//*[^/][^/]*/*$' \| \
- X"$as_dir" : 'X\(//\)[^/]' \| \
- X"$as_dir" : 'X\(//\)$' \| \
- X"$as_dir" : 'X\(/\)' \| . 2>/dev/null ||
-$as_echo X"$as_dir" |
- sed '/^X\(.*[^/]\)\/\/*[^/][^/]*\/*$/{
- s//\1/
- q
- }
- /^X\(\/\/\)[^/].*/{
- s//\1/
- q
- }
- /^X\(\/\/\)$/{
- s//\1/
- q
- }
- /^X\(\/\).*/{
- s//\1/
- q
- }
- s/.*/./; q'`
- test -d "$as_dir" && break
- done
- test -z "$as_dirs" || eval "mkdir $as_dirs"
- } || test -d "$as_dir" || { { $as_echo "$as_me:$LINENO: error: cannot create directory $as_dir" >&5
-$as_echo "$as_me: error: cannot create directory $as_dir" >&2;}
- { (exit 1); exit 1; }; }; }
- # echo "creating $dirpart/$file"
- echo '# dummy' > "$dirpart/$file"
- done
-done
- ;;
- "po-directories":C)
- for ac_file in $CONFIG_FILES; do
- # Support "outfile[:infile[:infile...]]"
- case "$ac_file" in
- *:*) ac_file=`echo "$ac_file"|sed 's%:.*%%'` ;;
- esac
- # PO directories have a Makefile.in generated from Makefile.in.in.
- case "$ac_file" in */Makefile.in)
- # Adjust a relative srcdir.
- ac_dir=`echo "$ac_file"|sed 's%/[^/][^/]*$%%'`
- ac_dir_suffix="/`echo "$ac_dir"|sed 's%^\./%%'`"
- ac_dots=`echo "$ac_dir_suffix"|sed 's%/[^/]*%../%g'`
- # In autoconf-2.13 it is called $ac_given_srcdir.
- # In autoconf-2.50 it is called $srcdir.
- test -n "$ac_given_srcdir" || ac_given_srcdir="$srcdir"
- case "$ac_given_srcdir" in
- .) top_srcdir=`echo $ac_dots|sed 's%/$%%'` ;;
- /*) top_srcdir="$ac_given_srcdir" ;;
- *) top_srcdir="$ac_dots$ac_given_srcdir" ;;
- esac
- # Treat a directory as a PO directory if and only if it has a
- # POTFILES.in file. This allows packages to have multiple PO
- # directories under different names or in different locations.
- if test -f "$ac_given_srcdir/$ac_dir/POTFILES.in"; then
- rm -f "$ac_dir/POTFILES"
- test -n "$as_me" && echo "$as_me: creating $ac_dir/POTFILES" || echo "creating $ac_dir/POTFILES"
- cat "$ac_given_srcdir/$ac_dir/POTFILES.in" | sed -e "/^#/d" -e "/^[ ]*\$/d" -e "s,.*, $top_srcdir/& \\\\," | sed -e "\$s/\(.*\) \\\\/\1/" > "$ac_dir/POTFILES"
- POMAKEFILEDEPS="POTFILES.in"
- # ALL_LINGUAS, POFILES, UPDATEPOFILES, DUMMYPOFILES, GMOFILES depend
- # on $ac_dir but don't depend on user-specified configuration
- # parameters.
- if test -f "$ac_given_srcdir/$ac_dir/LINGUAS"; then
- # The LINGUAS file contains the set of available languages.
- if test -n "$OBSOLETE_ALL_LINGUAS"; then
- test -n "$as_me" && echo "$as_me: setting ALL_LINGUAS in configure.in is obsolete" || echo "setting ALL_LINGUAS in configure.in is obsolete"
- fi
- ALL_LINGUAS_=`sed -e "/^#/d" -e "s/#.*//" "$ac_given_srcdir/$ac_dir/LINGUAS"`
- # Hide the ALL_LINGUAS assigment from automake < 1.5.
- eval 'ALL_LINGUAS''=$ALL_LINGUAS_'
- POMAKEFILEDEPS="$POMAKEFILEDEPS LINGUAS"
- else
- # The set of available languages was given in configure.in.
- # Hide the ALL_LINGUAS assigment from automake < 1.5.
- eval 'ALL_LINGUAS''=$OBSOLETE_ALL_LINGUAS'
- fi
- # Compute POFILES
- # as $(foreach lang, $(ALL_LINGUAS), $(srcdir)/$(lang).po)
- # Compute UPDATEPOFILES
- # as $(foreach lang, $(ALL_LINGUAS), $(lang).po-update)
- # Compute DUMMYPOFILES
- # as $(foreach lang, $(ALL_LINGUAS), $(lang).nop)
- # Compute GMOFILES
- # as $(foreach lang, $(ALL_LINGUAS), $(srcdir)/$(lang).gmo)
- case "$ac_given_srcdir" in
- .) srcdirpre= ;;
- *) srcdirpre='$(srcdir)/' ;;
- esac
- POFILES=
- UPDATEPOFILES=
- DUMMYPOFILES=
- GMOFILES=
- for lang in $ALL_LINGUAS; do
- POFILES="$POFILES $srcdirpre$lang.po"
- UPDATEPOFILES="$UPDATEPOFILES $lang.po-update"
- DUMMYPOFILES="$DUMMYPOFILES $lang.nop"
- GMOFILES="$GMOFILES $srcdirpre$lang.gmo"
- done
- # CATALOGS depends on both $ac_dir and the user's LINGUAS
- # environment variable.
- INST_LINGUAS=
- if test -n "$ALL_LINGUAS"; then
- for presentlang in $ALL_LINGUAS; do
- useit=no
- if test "%UNSET%" != "$LINGUAS"; then
- desiredlanguages="$LINGUAS"
- else
- desiredlanguages="$ALL_LINGUAS"
- fi
- for desiredlang in $desiredlanguages; do
- # Use the presentlang catalog if desiredlang is
- # a. equal to presentlang, or
- # b. a variant of presentlang (because in this case,
- # presentlang can be used as a fallback for messages
- # which are not translated in the desiredlang catalog).
- case "$desiredlang" in
- "$presentlang"*) useit=yes;;
- esac
- done
- if test $useit = yes; then
- INST_LINGUAS="$INST_LINGUAS $presentlang"
- fi
- done
- fi
- CATALOGS=
- if test -n "$INST_LINGUAS"; then
- for lang in $INST_LINGUAS; do
- CATALOGS="$CATALOGS $lang.gmo"
- done
- fi
- test -n "$as_me" && echo "$as_me: creating $ac_dir/Makefile" || echo "creating $ac_dir/Makefile"
- sed -e "/^POTFILES =/r $ac_dir/POTFILES" -e "/^# Makevars/r $ac_given_srcdir/$ac_dir/Makevars" -e "s|@POFILES@|$POFILES|g" -e "s|@UPDATEPOFILES@|$UPDATEPOFILES|g" -e "s|@DUMMYPOFILES@|$DUMMYPOFILES|g" -e "s|@GMOFILES@|$GMOFILES|g" -e "s|@CATALOGS@|$CATALOGS|g" -e "s|@POMAKEFILEDEPS@|$POMAKEFILEDEPS|g" "$ac_dir/Makefile.in" > "$ac_dir/Makefile"
- for f in "$ac_given_srcdir/$ac_dir"/Rules-*; do
- if test -f "$f"; then
- case "$f" in
- *.orig | *.bak | *~) ;;
- *) cat "$f" >> "$ac_dir/Makefile" ;;
- esac
- fi
- done
- fi
- ;;
- esac
- done ;;
-
- esac
-done # for ac_tag
-
-
-{ (exit 0); exit 0; }
-_ACEOF
-chmod +x $CONFIG_STATUS
-ac_clean_files=$ac_clean_files_save
-
-test $ac_write_fail = 0 ||
- { { $as_echo "$as_me:$LINENO: error: write failure creating $CONFIG_STATUS" >&5
-$as_echo "$as_me: error: write failure creating $CONFIG_STATUS" >&2;}
- { (exit 1); exit 1; }; }
-
-
-# configure is writing to config.log, and then calls config.status.
-# config.status does its own redirection, appending to config.log.
-# Unfortunately, on DOS this fails, as config.log is still kept open
-# by configure, so config.status won't be able to write to it; its
-# output is simply discarded. So we exec the FD to /dev/null,
-# effectively closing config.log, so it can be properly (re)opened and
-# appended to by config.status. When coming back to configure, we
-# need to make the FD available again.
-if test "$no_create" != yes; then
- ac_cs_success=:
- ac_config_status_args=
- test "$silent" = yes &&
- ac_config_status_args="$ac_config_status_args --quiet"
- exec 5>/dev/null
- $SHELL $CONFIG_STATUS $ac_config_status_args || ac_cs_success=false
- exec 5>>config.log
- # Use ||, not &&, to avoid exiting from the if with $? = 1, which
- # would make configure fail if this is the last instruction.
- $ac_cs_success || { (exit 1); exit 1; }
-fi
-if test -n "$ac_unrecognized_opts" && test "$enable_option_checking" != no; then
- { $as_echo "$as_me:$LINENO: WARNING: Unrecognized options: $ac_unrecognized_opts" >&5
-$as_echo "$as_me: WARNING: Unrecognized options: $ac_unrecognized_opts" >&2;}
-fi
-
diff --git a/Build/source/utils/xz-4.999.8beta/debug/Makefile.am b/Build/source/utils/xz-4.999.8beta/debug/Makefile.am
deleted file mode 100644
index 6ed5bc99bcd..00000000000
--- a/Build/source/utils/xz-4.999.8beta/debug/Makefile.am
+++ /dev/null
@@ -1,36 +0,0 @@
-##
-## Copyright (C) 2008 Lasse Collin
-##
-## This library is free software; you can redistribute it and/or
-## modify it under the terms of the GNU Lesser General Public
-## License as published by the Free Software Foundation; either
-## version 2.1 of the License, or (at your option) any later version.
-##
-## This library is distributed in the hope that it will be useful,
-## but WITHOUT ANY WARRANTY; without even the implied warranty of
-## MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the GNU
-## Lesser General Public License for more details.
-##
-
-noinst_PROGRAMS = \
- repeat \
- sync_flush \
- full_flush \
- memusage \
- crc32 \
- known_sizes \
- hex2bin
-
-AM_CPPFLAGS = \
- -I@top_srcdir@/src/common \
- -I@top_srcdir@/src/liblzma/api
-
-AM_LDFLAGS = -static
-
-LDADD = \
- @top_builddir@/src/liblzma/liblzma.la \
- @LTLIBINTL@
-
-if COND_GNULIB
-LDADD += @top_builddir@/lib/libgnu.a
-endif
diff --git a/Build/source/utils/xz-4.999.8beta/doc/bugs.txt b/Build/source/utils/xz-4.999.8beta/doc/bugs.txt
deleted file mode 100644
index 55579343da2..00000000000
--- a/Build/source/utils/xz-4.999.8beta/doc/bugs.txt
+++ /dev/null
@@ -1,46 +0,0 @@
-
-Reporting bugs
---------------
-
- Naturally it is easiest for me if you already know what causes the
- unexpected behavior. Even better if you have a patch to propose.
- However, quite often the reason for unexpected behavior is unknown,
- so below are a few things what to do before sending a bug report.
-
- In case of a crash (usually segmentation violation):
-
- 1. Try to create a small example how to reprocude the issue.
-
- 2. If you are writing an application using liblzma or libzfile,
- double check that you are using the libraries correctly (for
- example, that you didn't forget to call lzma_init()). If it is
- the command line tool included in LZMA Utils that is crashing,
- ignore this step.
-
- 3. Compile LZMA Utils with debugging code using configure switch
- `--enable-debug'. If you are using GCC as the compiler, use
- CFLAGS='-O0 -ggdb'. Don't strip the resulting binaries.
-
- 4. Turn on core dumps. The exact command depends on your shell;
- for example in GNU bash it is done with `ulimit -c unlimited',
- and in tcsh with `limit coredumpsize unlimited'.
-
- 5. Try to reproduce the suspected bug. If you get `assertion failed'
- message, be sure to include the complete message in your bug
- report. If the application leaves a coredump, get a backtrace
- using gdb:
- $ gdb /path/to/app-binary # Loads the app to the debugger.
- (gdb) core core # Opens the coredump.
- (gdb) bt # Prints the backtrace. Copy & paste to bug report.
- (gdb) quit # Quits gdb.
-
- Send your bug report to Lasse Collin <lasse.collin@tukaani.org>. Don't
- send the core dump file or the actual executables. If you have a small
- example file(s) (total size less than 100 KiB), please include it/them
- as an attachment.
-
- Do NOT complain about problems with LZMA Utils to Igor Pavlov.
- Although the code of LZMA Utils is derived from his code, there are
- a lot of changes, which may have introduced bugs not present in
- the original version.
-
diff --git a/Build/source/utils/xz-4.999.8beta/lib/Makefile.am b/Build/source/utils/xz-4.999.8beta/lib/Makefile.am
deleted file mode 100644
index 34b6bdd98ab..00000000000
--- a/Build/source/utils/xz-4.999.8beta/lib/Makefile.am
+++ /dev/null
@@ -1,32 +0,0 @@
-##
-## Copyright (C) 2004-2007 Free Software Foundation, Inc.
-##
-## This program is free software; you can redistribute it and/or modify
-## it under the terms of the GNU General Public License as published by
-## the Free Software Foundation; either version 2 of the License, or
-## (at your option) any later version.
-##
-## This program is distributed in the hope that it will be useful,
-## but WITHOUT ANY WARRANTY; without even the implied warranty of
-## MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
-## GNU General Public License for more details.
-##
-
-## Not using gnulib-tool, at least for now. It is likely that we won't
-## need anything else from Gnulib than getopt_long().
-
-noinst_LIBRARIES = libgnu.a
-
-libgnu_a_SOURCES =
-libgnu_a_DEPENDENCIES = $(LIBOBJS)
-libgnu_a_LIBADD = $(LIBOBJS)
-
-EXTRA_DIST = getopt.in.h getopt.c getopt1.c getopt_int.h
-BUILT_SOURCES = $(GETOPT_H)
-MOSTLYCLEANFILES = getopt.h getopt.h-t
-
-getopt.h: getopt.in.h
- { echo '/* DO NOT EDIT! GENERATED AUTOMATICALLY! */'; \
- cat $(srcdir)/getopt.in.h; \
- } > $@-t
- mv -f $@-t $@
diff --git a/Build/source/utils/xz-4.999.8beta/ltmain.sh b/Build/source/utils/xz-4.999.8beta/ltmain.sh
deleted file mode 100644
index 06823e057a5..00000000000
--- a/Build/source/utils/xz-4.999.8beta/ltmain.sh
+++ /dev/null
@@ -1,6863 +0,0 @@
-# ltmain.sh - Provide generalized library-building support services.
-# NOTE: Changing this file will not affect anything until you rerun configure.
-#
-# Copyright (C) 1996, 1997, 1998, 1999, 2000, 2001, 2003, 2004, 2005
-# Free Software Foundation, Inc.
-# Originally by Gordon Matzigkeit <gord@gnu.ai.mit.edu>, 1996
-#
-# This program is free software; you can redistribute it and/or modify
-# it under the terms of the GNU General Public License as published by
-# the Free Software Foundation; either version 2 of the License, or
-# (at your option) any later version.
-#
-# This program is distributed in the hope that it will be useful, but
-# WITHOUT ANY WARRANTY; without even the implied warranty of
-# MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the GNU
-# General Public License for more details.
-#
-# You should have received a copy of the GNU General Public License
-# along with this program; if not, write to the Free Software
-# Foundation, Inc., 51 Franklin Street, Fifth Floor, Boston, MA 02110-1301, USA.
-#
-# As a special exception to the GNU General Public License, if you
-# distribute this file as part of a program that contains a
-# configuration script generated by Autoconf, you may include it under
-# the same distribution terms that you use for the rest of that program.
-
-basename="s,^.*/,,g"
-
-# Work around backward compatibility issue on IRIX 6.5. On IRIX 6.4+, sh
-# is ksh but when the shell is invoked as "sh" and the current value of
-# the _XPG environment variable is not equal to 1 (one), the special
-# positional parameter $0, within a function call, is the name of the
-# function.
-progpath="$0"
-
-# The name of this program:
-progname=`echo "$progpath" | $SED $basename`
-modename="$progname"
-
-# Global variables:
-EXIT_SUCCESS=0
-EXIT_FAILURE=1
-
-PROGRAM=ltmain.sh
-PACKAGE=libtool
-VERSION=1.5.22
-TIMESTAMP=" (1.1220.2.365 2005/12/18 22:14:06)"
-
-# See if we are running on zsh, and set the options which allow our
-# commands through without removal of \ escapes.
-if test -n "${ZSH_VERSION+set}" ; then
- setopt NO_GLOB_SUBST
-fi
-
-# Check that we have a working $echo.
-if test "X$1" = X--no-reexec; then
- # Discard the --no-reexec flag, and continue.
- shift
-elif test "X$1" = X--fallback-echo; then
- # Avoid inline document here, it may be left over
- :
-elif test "X`($echo '\t') 2>/dev/null`" = 'X\t'; then
- # Yippee, $echo works!
- :
-else
- # Restart under the correct shell, and then maybe $echo will work.
- exec $SHELL "$progpath" --no-reexec ${1+"$@"}
-fi
-
-if test "X$1" = X--fallback-echo; then
- # used as fallback echo
- shift
- cat <<EOF
-$*
-EOF
- exit $EXIT_SUCCESS
-fi
-
-default_mode=
-help="Try \`$progname --help' for more information."
-magic="%%%MAGIC variable%%%"
-mkdir="mkdir"
-mv="mv -f"
-rm="rm -f"
-
-# Sed substitution that helps us do robust quoting. It backslashifies
-# metacharacters that are still active within double-quoted strings.
-Xsed="${SED}"' -e 1s/^X//'
-sed_quote_subst='s/\([\\`\\"$\\\\]\)/\\\1/g'
-# test EBCDIC or ASCII
-case `echo X|tr X '\101'` in
- A) # ASCII based system
- # \n is not interpreted correctly by Solaris 8 /usr/ucb/tr
- SP2NL='tr \040 \012'
- NL2SP='tr \015\012 \040\040'
- ;;
- *) # EBCDIC based system
- SP2NL='tr \100 \n'
- NL2SP='tr \r\n \100\100'
- ;;
-esac
-
-# NLS nuisances.
-# Only set LANG and LC_ALL to C if already set.
-# These must not be set unconditionally because not all systems understand
-# e.g. LANG=C (notably SCO).
-# We save the old values to restore during execute mode.
-if test "${LC_ALL+set}" = set; then
- save_LC_ALL="$LC_ALL"; LC_ALL=C; export LC_ALL
-fi
-if test "${LANG+set}" = set; then
- save_LANG="$LANG"; LANG=C; export LANG
-fi
-
-# Make sure IFS has a sensible default
-lt_nl='
-'
-IFS=" $lt_nl"
-
-if test "$build_libtool_libs" != yes && test "$build_old_libs" != yes; then
- $echo "$modename: not configured to build any kind of library" 1>&2
- $echo "Fatal configuration error. See the $PACKAGE docs for more information." 1>&2
- exit $EXIT_FAILURE
-fi
-
-# Global variables.
-mode=$default_mode
-nonopt=
-prev=
-prevopt=
-run=
-show="$echo"
-show_help=
-execute_dlfiles=
-duplicate_deps=no
-preserve_args=
-lo2o="s/\\.lo\$/.${objext}/"
-o2lo="s/\\.${objext}\$/.lo/"
-
-#####################################
-# Shell function definitions:
-# This seems to be the best place for them
-
-# func_mktempdir [string]
-# Make a temporary directory that won't clash with other running
-# libtool processes, and avoids race conditions if possible. If
-# given, STRING is the basename for that directory.
-func_mktempdir ()
-{
- my_template="${TMPDIR-/tmp}/${1-$progname}"
-
- if test "$run" = ":"; then
- # Return a directory name, but don't create it in dry-run mode
- my_tmpdir="${my_template}-$$"
- else
-
- # If mktemp works, use that first and foremost
- my_tmpdir=`mktemp -d "${my_template}-XXXXXXXX" 2>/dev/null`
-
- if test ! -d "$my_tmpdir"; then
- # Failing that, at least try and use $RANDOM to avoid a race
- my_tmpdir="${my_template}-${RANDOM-0}$$"
-
- save_mktempdir_umask=`umask`
- umask 0077
- $mkdir "$my_tmpdir"
- umask $save_mktempdir_umask
- fi
-
- # If we're not in dry-run mode, bomb out on failure
- test -d "$my_tmpdir" || {
- $echo "cannot create temporary directory \`$my_tmpdir'" 1>&2
- exit $EXIT_FAILURE
- }
- fi
-
- $echo "X$my_tmpdir" | $Xsed
-}
-
-
-# func_win32_libid arg
-# return the library type of file 'arg'
-#
-# Need a lot of goo to handle *both* DLLs and import libs
-# Has to be a shell function in order to 'eat' the argument
-# that is supplied when $file_magic_command is called.
-func_win32_libid ()
-{
- win32_libid_type="unknown"
- win32_fileres=`file -L $1 2>/dev/null`
- case $win32_fileres in
- *ar\ archive\ import\ library*) # definitely import
- win32_libid_type="x86 archive import"
- ;;
- *ar\ archive*) # could be an import, or static
- if eval $OBJDUMP -f $1 | $SED -e '10q' 2>/dev/null | \
- $EGREP -e 'file format pe-i386(.*architecture: i386)?' >/dev/null ; then
- win32_nmres=`eval $NM -f posix -A $1 | \
- $SED -n -e '1,100{/ I /{s,.*,import,;p;q;};}'`
- case $win32_nmres in
- import*) win32_libid_type="x86 archive import";;
- *) win32_libid_type="x86 archive static";;
- esac
- fi
- ;;
- *DLL*)
- win32_libid_type="x86 DLL"
- ;;
- *executable*) # but shell scripts are "executable" too...
- case $win32_fileres in
- *MS\ Windows\ PE\ Intel*)
- win32_libid_type="x86 DLL"
- ;;
- esac
- ;;
- esac
- $echo $win32_libid_type
-}
-
-
-# func_infer_tag arg
-# Infer tagged configuration to use if any are available and
-# if one wasn't chosen via the "--tag" command line option.
-# Only attempt this if the compiler in the base compile
-# command doesn't match the default compiler.
-# arg is usually of the form 'gcc ...'
-func_infer_tag ()
-{
- if test -n "$available_tags" && test -z "$tagname"; then
- CC_quoted=
- for arg in $CC; do
- case $arg in
- *[\[\~\#\^\&\*\(\)\{\}\|\;\<\>\?\'\ \ ]*|*]*|"")
- arg="\"$arg\""
- ;;
- esac
- CC_quoted="$CC_quoted $arg"
- done
- case $@ in
- # Blanks in the command may have been stripped by the calling shell,
- # but not from the CC environment variable when configure was run.
- " $CC "* | "$CC "* | " `$echo $CC` "* | "`$echo $CC` "* | " $CC_quoted"* | "$CC_quoted "* | " `$echo $CC_quoted` "* | "`$echo $CC_quoted` "*) ;;
- # Blanks at the start of $base_compile will cause this to fail
- # if we don't check for them as well.
- *)
- for z in $available_tags; do
- if grep "^# ### BEGIN LIBTOOL TAG CONFIG: $z$" < "$progpath" > /dev/null; then
- # Evaluate the configuration.
- eval "`${SED} -n -e '/^# ### BEGIN LIBTOOL TAG CONFIG: '$z'$/,/^# ### END LIBTOOL TAG CONFIG: '$z'$/p' < $progpath`"
- CC_quoted=
- for arg in $CC; do
- # Double-quote args containing other shell metacharacters.
- case $arg in
- *[\[\~\#\^\&\*\(\)\{\}\|\;\<\>\?\'\ \ ]*|*]*|"")
- arg="\"$arg\""
- ;;
- esac
- CC_quoted="$CC_quoted $arg"
- done
- case "$@ " in
- " $CC "* | "$CC "* | " `$echo $CC` "* | "`$echo $CC` "* | " $CC_quoted"* | "$CC_quoted "* | " `$echo $CC_quoted` "* | "`$echo $CC_quoted` "*)
- # The compiler in the base compile command matches
- # the one in the tagged configuration.
- # Assume this is the tagged configuration we want.
- tagname=$z
- break
- ;;
- esac
- fi
- done
- # If $tagname still isn't set, then no tagged configuration
- # was found and let the user know that the "--tag" command
- # line option must be used.
- if test -z "$tagname"; then
- $echo "$modename: unable to infer tagged configuration"
- $echo "$modename: specify a tag with \`--tag'" 1>&2
- exit $EXIT_FAILURE
-# else
-# $echo "$modename: using $tagname tagged configuration"
- fi
- ;;
- esac
- fi
-}
-
-
-# func_extract_an_archive dir oldlib
-func_extract_an_archive ()
-{
- f_ex_an_ar_dir="$1"; shift
- f_ex_an_ar_oldlib="$1"
-
- $show "(cd $f_ex_an_ar_dir && $AR x $f_ex_an_ar_oldlib)"
- $run eval "(cd \$f_ex_an_ar_dir && $AR x \$f_ex_an_ar_oldlib)" || exit $?
- if ($AR t "$f_ex_an_ar_oldlib" | sort | sort -uc >/dev/null 2>&1); then
- :
- else
- $echo "$modename: ERROR: object name conflicts: $f_ex_an_ar_dir/$f_ex_an_ar_oldlib" 1>&2
- exit $EXIT_FAILURE
- fi
-}
-
-# func_extract_archives gentop oldlib ...
-func_extract_archives ()
-{
- my_gentop="$1"; shift
- my_oldlibs=${1+"$@"}
- my_oldobjs=""
- my_xlib=""
- my_xabs=""
- my_xdir=""
- my_status=""
-
- $show "${rm}r $my_gentop"
- $run ${rm}r "$my_gentop"
- $show "$mkdir $my_gentop"
- $run $mkdir "$my_gentop"
- my_status=$?
- if test "$my_status" -ne 0 && test ! -d "$my_gentop"; then
- exit $my_status
- fi
-
- for my_xlib in $my_oldlibs; do
- # Extract the objects.
- case $my_xlib in
- [\\/]* | [A-Za-z]:[\\/]*) my_xabs="$my_xlib" ;;
- *) my_xabs=`pwd`"/$my_xlib" ;;
- esac
- my_xlib=`$echo "X$my_xlib" | $Xsed -e 's%^.*/%%'`
- my_xdir="$my_gentop/$my_xlib"
-
- $show "${rm}r $my_xdir"
- $run ${rm}r "$my_xdir"
- $show "$mkdir $my_xdir"
- $run $mkdir "$my_xdir"
- exit_status=$?
- if test "$exit_status" -ne 0 && test ! -d "$my_xdir"; then
- exit $exit_status
- fi
- case $host in
- *-darwin*)
- $show "Extracting $my_xabs"
- # Do not bother doing anything if just a dry run
- if test -z "$run"; then
- darwin_orig_dir=`pwd`
- cd $my_xdir || exit $?
- darwin_archive=$my_xabs
- darwin_curdir=`pwd`
- darwin_base_archive=`$echo "X$darwin_archive" | $Xsed -e 's%^.*/%%'`
- darwin_arches=`lipo -info "$darwin_archive" 2>/dev/null | $EGREP Architectures 2>/dev/null`
- if test -n "$darwin_arches"; then
- darwin_arches=`echo "$darwin_arches" | $SED -e 's/.*are://'`
- darwin_arch=
- $show "$darwin_base_archive has multiple architectures $darwin_arches"
- for darwin_arch in $darwin_arches ; do
- mkdir -p "unfat-$$/${darwin_base_archive}-${darwin_arch}"
- lipo -thin $darwin_arch -output "unfat-$$/${darwin_base_archive}-${darwin_arch}/${darwin_base_archive}" "${darwin_archive}"
- cd "unfat-$$/${darwin_base_archive}-${darwin_arch}"
- func_extract_an_archive "`pwd`" "${darwin_base_archive}"
- cd "$darwin_curdir"
- $rm "unfat-$$/${darwin_base_archive}-${darwin_arch}/${darwin_base_archive}"
- done # $darwin_arches
- ## Okay now we have a bunch of thin objects, gotta fatten them up :)
- darwin_filelist=`find unfat-$$ -type f -name \*.o -print -o -name \*.lo -print| xargs basename | sort -u | $NL2SP`
- darwin_file=
- darwin_files=
- for darwin_file in $darwin_filelist; do
- darwin_files=`find unfat-$$ -name $darwin_file -print | $NL2SP`
- lipo -create -output "$darwin_file" $darwin_files
- done # $darwin_filelist
- ${rm}r unfat-$$
- cd "$darwin_orig_dir"
- else
- cd "$darwin_orig_dir"
- func_extract_an_archive "$my_xdir" "$my_xabs"
- fi # $darwin_arches
- fi # $run
- ;;
- *)
- func_extract_an_archive "$my_xdir" "$my_xabs"
- ;;
- esac
- my_oldobjs="$my_oldobjs "`find $my_xdir -name \*.$objext -print -o -name \*.lo -print | $NL2SP`
- done
- func_extract_archives_result="$my_oldobjs"
-}
-# End of Shell function definitions
-#####################################
-
-# Darwin sucks
-eval std_shrext=\"$shrext_cmds\"
-
-disable_libs=no
-
-# Parse our command line options once, thoroughly.
-while test "$#" -gt 0
-do
- arg="$1"
- shift
-
- case $arg in
- -*=*) optarg=`$echo "X$arg" | $Xsed -e 's/[-_a-zA-Z0-9]*=//'` ;;
- *) optarg= ;;
- esac
-
- # If the previous option needs an argument, assign it.
- if test -n "$prev"; then
- case $prev in
- execute_dlfiles)
- execute_dlfiles="$execute_dlfiles $arg"
- ;;
- tag)
- tagname="$arg"
- preserve_args="${preserve_args}=$arg"
-
- # Check whether tagname contains only valid characters
- case $tagname in
- *[!-_A-Za-z0-9,/]*)
- $echo "$progname: invalid tag name: $tagname" 1>&2
- exit $EXIT_FAILURE
- ;;
- esac
-
- case $tagname in
- CC)
- # Don't test for the "default" C tag, as we know, it's there, but
- # not specially marked.
- ;;
- *)
- if grep "^# ### BEGIN LIBTOOL TAG CONFIG: $tagname$" < "$progpath" > /dev/null; then
- taglist="$taglist $tagname"
- # Evaluate the configuration.
- eval "`${SED} -n -e '/^# ### BEGIN LIBTOOL TAG CONFIG: '$tagname'$/,/^# ### END LIBTOOL TAG CONFIG: '$tagname'$/p' < $progpath`"
- else
- $echo "$progname: ignoring unknown tag $tagname" 1>&2
- fi
- ;;
- esac
- ;;
- *)
- eval "$prev=\$arg"
- ;;
- esac
-
- prev=
- prevopt=
- continue
- fi
-
- # Have we seen a non-optional argument yet?
- case $arg in
- --help)
- show_help=yes
- ;;
-
- --version)
- $echo "$PROGRAM (GNU $PACKAGE) $VERSION$TIMESTAMP"
- $echo
- $echo "Copyright (C) 2005 Free Software Foundation, Inc."
- $echo "This is free software; see the source for copying conditions. There is NO"
- $echo "warranty; not even for MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE."
- exit $?
- ;;
-
- --config)
- ${SED} -e '1,/^# ### BEGIN LIBTOOL CONFIG/d' -e '/^# ### END LIBTOOL CONFIG/,$d' $progpath
- # Now print the configurations for the tags.
- for tagname in $taglist; do
- ${SED} -n -e "/^# ### BEGIN LIBTOOL TAG CONFIG: $tagname$/,/^# ### END LIBTOOL TAG CONFIG: $tagname$/p" < "$progpath"
- done
- exit $?
- ;;
-
- --debug)
- $echo "$progname: enabling shell trace mode"
- set -x
- preserve_args="$preserve_args $arg"
- ;;
-
- --dry-run | -n)
- run=:
- ;;
-
- --features)
- $echo "host: $host"
- if test "$build_libtool_libs" = yes; then
- $echo "enable shared libraries"
- else
- $echo "disable shared libraries"
- fi
- if test "$build_old_libs" = yes; then
- $echo "enable static libraries"
- else
- $echo "disable static libraries"
- fi
- exit $?
- ;;
-
- --finish) mode="finish" ;;
-
- --mode) prevopt="--mode" prev=mode ;;
- --mode=*) mode="$optarg" ;;
-
- --preserve-dup-deps) duplicate_deps="yes" ;;
-
- --quiet | --silent)
- show=:
- preserve_args="$preserve_args $arg"
- ;;
-
- --tag)
- prevopt="--tag"
- prev=tag
- preserve_args="$preserve_args --tag"
- ;;
- --tag=*)
- set tag "$optarg" ${1+"$@"}
- shift
- prev=tag
- preserve_args="$preserve_args --tag"
- ;;
-
- -dlopen)
- prevopt="-dlopen"
- prev=execute_dlfiles
- ;;
-
- -*)
- $echo "$modename: unrecognized option \`$arg'" 1>&2
- $echo "$help" 1>&2
- exit $EXIT_FAILURE
- ;;
-
- *)
- nonopt="$arg"
- break
- ;;
- esac
-done
-
-if test -n "$prevopt"; then
- $echo "$modename: option \`$prevopt' requires an argument" 1>&2
- $echo "$help" 1>&2
- exit $EXIT_FAILURE
-fi
-
-case $disable_libs in
-no)
- ;;
-shared)
- build_libtool_libs=no
- build_old_libs=yes
- ;;
-static)
- build_old_libs=`case $build_libtool_libs in yes) echo no;; *) echo yes;; esac`
- ;;
-esac
-
-# If this variable is set in any of the actions, the command in it
-# will be execed at the end. This prevents here-documents from being
-# left over by shells.
-exec_cmd=
-
-if test -z "$show_help"; then
-
- # Infer the operation mode.
- if test -z "$mode"; then
- $echo "*** Warning: inferring the mode of operation is deprecated." 1>&2
- $echo "*** Future versions of Libtool will require --mode=MODE be specified." 1>&2
- case $nonopt in
- *cc | cc* | *++ | gcc* | *-gcc* | g++* | xlc*)
- mode=link
- for arg
- do
- case $arg in
- -c)
- mode=compile
- break
- ;;
- esac
- done
- ;;
- *db | *dbx | *strace | *truss)
- mode=execute
- ;;
- *install*|cp|mv)
- mode=install
- ;;
- *rm)
- mode=uninstall
- ;;
- *)
- # If we have no mode, but dlfiles were specified, then do execute mode.
- test -n "$execute_dlfiles" && mode=execute
-
- # Just use the default operation mode.
- if test -z "$mode"; then
- if test -n "$nonopt"; then
- $echo "$modename: warning: cannot infer operation mode from \`$nonopt'" 1>&2
- else
- $echo "$modename: warning: cannot infer operation mode without MODE-ARGS" 1>&2
- fi
- fi
- ;;
- esac
- fi
-
- # Only execute mode is allowed to have -dlopen flags.
- if test -n "$execute_dlfiles" && test "$mode" != execute; then
- $echo "$modename: unrecognized option \`-dlopen'" 1>&2
- $echo "$help" 1>&2
- exit $EXIT_FAILURE
- fi
-
- # Change the help message to a mode-specific one.
- generic_help="$help"
- help="Try \`$modename --help --mode=$mode' for more information."
-
- # These modes are in order of execution frequency so that they run quickly.
- case $mode in
- # libtool compile mode
- compile)
- modename="$modename: compile"
- # Get the compilation command and the source file.
- base_compile=
- srcfile="$nonopt" # always keep a non-empty value in "srcfile"
- suppress_opt=yes
- suppress_output=
- arg_mode=normal
- libobj=
- later=
-
- for arg
- do
- case $arg_mode in
- arg )
- # do not "continue". Instead, add this to base_compile
- lastarg="$arg"
- arg_mode=normal
- ;;
-
- target )
- libobj="$arg"
- arg_mode=normal
- continue
- ;;
-
- normal )
- # Accept any command-line options.
- case $arg in
- -o)
- if test -n "$libobj" ; then
- $echo "$modename: you cannot specify \`-o' more than once" 1>&2
- exit $EXIT_FAILURE
- fi
- arg_mode=target
- continue
- ;;
-
- -static | -prefer-pic | -prefer-non-pic)
- later="$later $arg"
- continue
- ;;
-
- -no-suppress)
- suppress_opt=no
- continue
- ;;
-
- -Xcompiler)
- arg_mode=arg # the next one goes into the "base_compile" arg list
- continue # The current "srcfile" will either be retained or
- ;; # replaced later. I would guess that would be a bug.
-
- -Wc,*)
- args=`$echo "X$arg" | $Xsed -e "s/^-Wc,//"`
- lastarg=
- save_ifs="$IFS"; IFS=','
- for arg in $args; do
- IFS="$save_ifs"
-
- # Double-quote args containing other shell metacharacters.
- # Many Bourne shells cannot handle close brackets correctly
- # in scan sets, so we specify it separately.
- case $arg in
- *[\[\~\#\^\&\*\(\)\{\}\|\;\<\>\?\'\ \ ]*|*]*|"")
- arg="\"$arg\""
- ;;
- esac
- lastarg="$lastarg $arg"
- done
- IFS="$save_ifs"
- lastarg=`$echo "X$lastarg" | $Xsed -e "s/^ //"`
-
- # Add the arguments to base_compile.
- base_compile="$base_compile $lastarg"
- continue
- ;;
-
- * )
- # Accept the current argument as the source file.
- # The previous "srcfile" becomes the current argument.
- #
- lastarg="$srcfile"
- srcfile="$arg"
- ;;
- esac # case $arg
- ;;
- esac # case $arg_mode
-
- # Aesthetically quote the previous argument.
- lastarg=`$echo "X$lastarg" | $Xsed -e "$sed_quote_subst"`
-
- case $lastarg in
- # Double-quote args containing other shell metacharacters.
- # Many Bourne shells cannot handle close brackets correctly
- # in scan sets, and some SunOS ksh mistreat backslash-escaping
- # in scan sets (worked around with variable expansion),
- # and furthermore cannot handle '|' '&' '(' ')' in scan sets
- # at all, so we specify them separately.
- *[\[\~\#\^\&\*\(\)\{\}\|\;\<\>\?\'\ \ ]*|*]*|"")
- lastarg="\"$lastarg\""
- ;;
- esac
-
- base_compile="$base_compile $lastarg"
- done # for arg
-
- case $arg_mode in
- arg)
- $echo "$modename: you must specify an argument for -Xcompile"
- exit $EXIT_FAILURE
- ;;
- target)
- $echo "$modename: you must specify a target with \`-o'" 1>&2
- exit $EXIT_FAILURE
- ;;
- *)
- # Get the name of the library object.
- [ -z "$libobj" ] && libobj=`$echo "X$srcfile" | $Xsed -e 's%^.*/%%'`
- ;;
- esac
-
- # Recognize several different file suffixes.
- # If the user specifies -o file.o, it is replaced with file.lo
- xform='[cCFSifmso]'
- case $libobj in
- *.ada) xform=ada ;;
- *.adb) xform=adb ;;
- *.ads) xform=ads ;;
- *.asm) xform=asm ;;
- *.c++) xform=c++ ;;
- *.cc) xform=cc ;;
- *.ii) xform=ii ;;
- *.class) xform=class ;;
- *.cpp) xform=cpp ;;
- *.cxx) xform=cxx ;;
- *.f90) xform=f90 ;;
- *.for) xform=for ;;
- *.java) xform=java ;;
- esac
-
- libobj=`$echo "X$libobj" | $Xsed -e "s/\.$xform$/.lo/"`
-
- case $libobj in
- *.lo) obj=`$echo "X$libobj" | $Xsed -e "$lo2o"` ;;
- *)
- $echo "$modename: cannot determine name of library object from \`$libobj'" 1>&2
- exit $EXIT_FAILURE
- ;;
- esac
-
- func_infer_tag $base_compile
-
- for arg in $later; do
- case $arg in
- -static)
- build_old_libs=yes
- continue
- ;;
-
- -prefer-pic)
- pic_mode=yes
- continue
- ;;
-
- -prefer-non-pic)
- pic_mode=no
- continue
- ;;
- esac
- done
-
- qlibobj=`$echo "X$libobj" | $Xsed -e "$sed_quote_subst"`
- case $qlibobj in
- *[\[\~\#\^\&\*\(\)\{\}\|\;\<\>\?\'\ \ ]*|*]*|"")
- qlibobj="\"$qlibobj\"" ;;
- esac
- test "X$libobj" != "X$qlibobj" \
- && $echo "X$libobj" | grep '[]~#^*{};<>?"'"'"' &()|`$[]' \
- && $echo "$modename: libobj name \`$libobj' may not contain shell special characters."
- objname=`$echo "X$obj" | $Xsed -e 's%^.*/%%'`
- xdir=`$echo "X$obj" | $Xsed -e 's%/[^/]*$%%'`
- if test "X$xdir" = "X$obj"; then
- xdir=
- else
- xdir=$xdir/
- fi
- lobj=${xdir}$objdir/$objname
-
- if test -z "$base_compile"; then
- $echo "$modename: you must specify a compilation command" 1>&2
- $echo "$help" 1>&2
- exit $EXIT_FAILURE
- fi
-
- # Delete any leftover library objects.
- if test "$build_old_libs" = yes; then
- removelist="$obj $lobj $libobj ${libobj}T"
- else
- removelist="$lobj $libobj ${libobj}T"
- fi
-
- $run $rm $removelist
- trap "$run $rm $removelist; exit $EXIT_FAILURE" 1 2 15
-
- # On Cygwin there's no "real" PIC flag so we must build both object types
- case $host_os in
- cygwin* | mingw* | pw32* | os2*)
- pic_mode=default
- ;;
- esac
- if test "$pic_mode" = no && test "$deplibs_check_method" != pass_all; then
- # non-PIC code in shared libraries is not supported
- pic_mode=default
- fi
-
- # Calculate the filename of the output object if compiler does
- # not support -o with -c
- if test "$compiler_c_o" = no; then
- output_obj=`$echo "X$srcfile" | $Xsed -e 's%^.*/%%' -e 's%\.[^.]*$%%'`.${objext}
- lockfile="$output_obj.lock"
- removelist="$removelist $output_obj $lockfile"
- trap "$run $rm $removelist; exit $EXIT_FAILURE" 1 2 15
- else
- output_obj=
- need_locks=no
- lockfile=
- fi
-
- # Lock this critical section if it is needed
- # We use this script file to make the link, it avoids creating a new file
- if test "$need_locks" = yes; then
- until $run ln "$progpath" "$lockfile" 2>/dev/null; do
- $show "Waiting for $lockfile to be removed"
- sleep 2
- done
- elif test "$need_locks" = warn; then
- if test -f "$lockfile"; then
- $echo "\
-*** ERROR, $lockfile exists and contains:
-`cat $lockfile 2>/dev/null`
-
-This indicates that another process is trying to use the same
-temporary object file, and libtool could not work around it because
-your compiler does not support \`-c' and \`-o' together. If you
-repeat this compilation, it may succeed, by chance, but you had better
-avoid parallel builds (make -j) in this platform, or get a better
-compiler."
-
- $run $rm $removelist
- exit $EXIT_FAILURE
- fi
- $echo "$srcfile" > "$lockfile"
- fi
-
- if test -n "$fix_srcfile_path"; then
- eval srcfile=\"$fix_srcfile_path\"
- fi
- qsrcfile=`$echo "X$srcfile" | $Xsed -e "$sed_quote_subst"`
- case $qsrcfile in
- *[\[\~\#\^\&\*\(\)\{\}\|\;\<\>\?\'\ \ ]*|*]*|"")
- qsrcfile="\"$qsrcfile\"" ;;
- esac
-
- $run $rm "$libobj" "${libobj}T"
-
- # Create a libtool object file (analogous to a ".la" file),
- # but don't create it if we're doing a dry run.
- test -z "$run" && cat > ${libobj}T <<EOF
-# $libobj - a libtool object file
-# Generated by $PROGRAM - GNU $PACKAGE $VERSION$TIMESTAMP
-#
-# Please DO NOT delete this file!
-# It is necessary for linking the library.
-
-# Name of the PIC object.
-EOF
-
- # Only build a PIC object if we are building libtool libraries.
- if test "$build_libtool_libs" = yes; then
- # Without this assignment, base_compile gets emptied.
- fbsd_hideous_sh_bug=$base_compile
-
- if test "$pic_mode" != no; then
- command="$base_compile $qsrcfile $pic_flag"
- else
- # Don't build PIC code
- command="$base_compile $qsrcfile"
- fi
-
- if test ! -d "${xdir}$objdir"; then
- $show "$mkdir ${xdir}$objdir"
- $run $mkdir ${xdir}$objdir
- exit_status=$?
- if test "$exit_status" -ne 0 && test ! -d "${xdir}$objdir"; then
- exit $exit_status
- fi
- fi
-
- if test -z "$output_obj"; then
- # Place PIC objects in $objdir
- command="$command -o $lobj"
- fi
-
- $run $rm "$lobj" "$output_obj"
-
- $show "$command"
- if $run eval "$command"; then :
- else
- test -n "$output_obj" && $run $rm $removelist
- exit $EXIT_FAILURE
- fi
-
- if test "$need_locks" = warn &&
- test "X`cat $lockfile 2>/dev/null`" != "X$srcfile"; then
- $echo "\
-*** ERROR, $lockfile contains:
-`cat $lockfile 2>/dev/null`
-
-but it should contain:
-$srcfile
-
-This indicates that another process is trying to use the same
-temporary object file, and libtool could not work around it because
-your compiler does not support \`-c' and \`-o' together. If you
-repeat this compilation, it may succeed, by chance, but you had better
-avoid parallel builds (make -j) in this platform, or get a better
-compiler."
-
- $run $rm $removelist
- exit $EXIT_FAILURE
- fi
-
- # Just move the object if needed, then go on to compile the next one
- if test -n "$output_obj" && test "X$output_obj" != "X$lobj"; then
- $show "$mv $output_obj $lobj"
- if $run $mv $output_obj $lobj; then :
- else
- error=$?
- $run $rm $removelist
- exit $error
- fi
- fi
-
- # Append the name of the PIC object to the libtool object file.
- test -z "$run" && cat >> ${libobj}T <<EOF
-pic_object='$objdir/$objname'
-
-EOF
-
- # Allow error messages only from the first compilation.
- if test "$suppress_opt" = yes; then
- suppress_output=' >/dev/null 2>&1'
- fi
- else
- # No PIC object so indicate it doesn't exist in the libtool
- # object file.
- test -z "$run" && cat >> ${libobj}T <<EOF
-pic_object=none
-
-EOF
- fi
-
- # Only build a position-dependent object if we build old libraries.
- if test "$build_old_libs" = yes; then
- if test "$pic_mode" != yes; then
- # Don't build PIC code
- command="$base_compile $qsrcfile"
- else
- command="$base_compile $qsrcfile $pic_flag"
- fi
- if test "$compiler_c_o" = yes; then
- command="$command -o $obj"
- fi
-
- # Suppress compiler output if we already did a PIC compilation.
- command="$command$suppress_output"
- $run $rm "$obj" "$output_obj"
- $show "$command"
- if $run eval "$command"; then :
- else
- $run $rm $removelist
- exit $EXIT_FAILURE
- fi
-
- if test "$need_locks" = warn &&
- test "X`cat $lockfile 2>/dev/null`" != "X$srcfile"; then
- $echo "\
-*** ERROR, $lockfile contains:
-`cat $lockfile 2>/dev/null`
-
-but it should contain:
-$srcfile
-
-This indicates that another process is trying to use the same
-temporary object file, and libtool could not work around it because
-your compiler does not support \`-c' and \`-o' together. If you
-repeat this compilation, it may succeed, by chance, but you had better
-avoid parallel builds (make -j) in this platform, or get a better
-compiler."
-
- $run $rm $removelist
- exit $EXIT_FAILURE
- fi
-
- # Just move the object if needed
- if test -n "$output_obj" && test "X$output_obj" != "X$obj"; then
- $show "$mv $output_obj $obj"
- if $run $mv $output_obj $obj; then :
- else
- error=$?
- $run $rm $removelist
- exit $error
- fi
- fi
-
- # Append the name of the non-PIC object the libtool object file.
- # Only append if the libtool object file exists.
- test -z "$run" && cat >> ${libobj}T <<EOF
-# Name of the non-PIC object.
-non_pic_object='$objname'
-
-EOF
- else
- # Append the name of the non-PIC object the libtool object file.
- # Only append if the libtool object file exists.
- test -z "$run" && cat >> ${libobj}T <<EOF
-# Name of the non-PIC object.
-non_pic_object=none
-
-EOF
- fi
-
- $run $mv "${libobj}T" "${libobj}"
-
- # Unlock the critical section if it was locked
- if test "$need_locks" != no; then
- $run $rm "$lockfile"
- fi
-
- exit $EXIT_SUCCESS
- ;;
-
- # libtool link mode
- link | relink)
- modename="$modename: link"
- case $host in
- *-*-cygwin* | *-*-mingw* | *-*-pw32* | *-*-os2*)
- # It is impossible to link a dll without this setting, and
- # we shouldn't force the makefile maintainer to figure out
- # which system we are compiling for in order to pass an extra
- # flag for every libtool invocation.
- # allow_undefined=no
-
- # FIXME: Unfortunately, there are problems with the above when trying
- # to make a dll which has undefined symbols, in which case not
- # even a static library is built. For now, we need to specify
- # -no-undefined on the libtool link line when we can be certain
- # that all symbols are satisfied, otherwise we get a static library.
- allow_undefined=yes
- ;;
- *)
- allow_undefined=yes
- ;;
- esac
- libtool_args="$nonopt"
- base_compile="$nonopt $@"
- compile_command="$nonopt"
- finalize_command="$nonopt"
-
- compile_rpath=
- finalize_rpath=
- compile_shlibpath=
- finalize_shlibpath=
- convenience=
- old_convenience=
- deplibs=
- old_deplibs=
- compiler_flags=
- linker_flags=
- dllsearchpath=
- lib_search_path=`pwd`
- inst_prefix_dir=
-
- avoid_version=no
- dlfiles=
- dlprefiles=
- dlself=no
- export_dynamic=no
- export_symbols=
- export_symbols_regex=
- generated=
- libobjs=
- ltlibs=
- module=no
- no_install=no
- objs=
- non_pic_objects=
- notinst_path= # paths that contain not-installed libtool libraries
- precious_files_regex=
- prefer_static_libs=no
- preload=no
- prev=
- prevarg=
- release=
- rpath=
- xrpath=
- perm_rpath=
- temp_rpath=
- thread_safe=no
- vinfo=
- vinfo_number=no
-
- func_infer_tag $base_compile
-
- # We need to know -static, to get the right output filenames.
- for arg
- do
- case $arg in
- -all-static | -static)
- if test "X$arg" = "X-all-static"; then
- if test "$build_libtool_libs" = yes && test -z "$link_static_flag"; then
- $echo "$modename: warning: complete static linking is impossible in this configuration" 1>&2
- fi
- if test -n "$link_static_flag"; then
- dlopen_self=$dlopen_self_static
- fi
- prefer_static_libs=yes
- else
- if test -z "$pic_flag" && test -n "$link_static_flag"; then
- dlopen_self=$dlopen_self_static
- fi
- prefer_static_libs=built
- fi
- build_libtool_libs=no
- build_old_libs=yes
- break
- ;;
- esac
- done
-
- # See if our shared archives depend on static archives.
- test -n "$old_archive_from_new_cmds" && build_old_libs=yes
-
- # Go through the arguments, transforming them on the way.
- while test "$#" -gt 0; do
- arg="$1"
- shift
- case $arg in
- *[\[\~\#\^\&\*\(\)\{\}\|\;\<\>\?\'\ \ ]*|*]*|"")
- qarg=\"`$echo "X$arg" | $Xsed -e "$sed_quote_subst"`\" ### testsuite: skip nested quoting test
- ;;
- *) qarg=$arg ;;
- esac
- libtool_args="$libtool_args $qarg"
-
- # If the previous option needs an argument, assign it.
- if test -n "$prev"; then
- case $prev in
- output)
- compile_command="$compile_command @OUTPUT@"
- finalize_command="$finalize_command @OUTPUT@"
- ;;
- esac
-
- case $prev in
- dlfiles|dlprefiles)
- if test "$preload" = no; then
- # Add the symbol object into the linking commands.
- compile_command="$compile_command @SYMFILE@"
- finalize_command="$finalize_command @SYMFILE@"
- preload=yes
- fi
- case $arg in
- *.la | *.lo) ;; # We handle these cases below.
- force)
- if test "$dlself" = no; then
- dlself=needless
- export_dynamic=yes
- fi
- prev=
- continue
- ;;
- self)
- if test "$prev" = dlprefiles; then
- dlself=yes
- elif test "$prev" = dlfiles && test "$dlopen_self" != yes; then
- dlself=yes
- else
- dlself=needless
- export_dynamic=yes
- fi
- prev=
- continue
- ;;
- *)
- if test "$prev" = dlfiles; then
- dlfiles="$dlfiles $arg"
- else
- dlprefiles="$dlprefiles $arg"
- fi
- prev=
- continue
- ;;
- esac
- ;;
- expsyms)
- export_symbols="$arg"
- if test ! -f "$arg"; then
- $echo "$modename: symbol file \`$arg' does not exist"
- exit $EXIT_FAILURE
- fi
- prev=
- continue
- ;;
- expsyms_regex)
- export_symbols_regex="$arg"
- prev=
- continue
- ;;
- inst_prefix)
- inst_prefix_dir="$arg"
- prev=
- continue
- ;;
- precious_regex)
- precious_files_regex="$arg"
- prev=
- continue
- ;;
- release)
- release="-$arg"
- prev=
- continue
- ;;
- objectlist)
- if test -f "$arg"; then
- save_arg=$arg
- moreargs=
- for fil in `cat $save_arg`
- do
-# moreargs="$moreargs $fil"
- arg=$fil
- # A libtool-controlled object.
-
- # Check to see that this really is a libtool object.
- if (${SED} -e '2q' $arg | grep "^# Generated by .*$PACKAGE") >/dev/null 2>&1; then
- pic_object=
- non_pic_object=
-
- # Read the .lo file
- # If there is no directory component, then add one.
- case $arg in
- */* | *\\*) . $arg ;;
- *) . ./$arg ;;
- esac
-
- if test -z "$pic_object" || \
- test -z "$non_pic_object" ||
- test "$pic_object" = none && \
- test "$non_pic_object" = none; then
- $echo "$modename: cannot find name of object for \`$arg'" 1>&2
- exit $EXIT_FAILURE
- fi
-
- # Extract subdirectory from the argument.
- xdir=`$echo "X$arg" | $Xsed -e 's%/[^/]*$%%'`
- if test "X$xdir" = "X$arg"; then
- xdir=
- else
- xdir="$xdir/"
- fi
-
- if test "$pic_object" != none; then
- # Prepend the subdirectory the object is found in.
- pic_object="$xdir$pic_object"
-
- if test "$prev" = dlfiles; then
- if test "$build_libtool_libs" = yes && test "$dlopen_support" = yes; then
- dlfiles="$dlfiles $pic_object"
- prev=
- continue
- else
- # If libtool objects are unsupported, then we need to preload.
- prev=dlprefiles
- fi
- fi
-
- # CHECK ME: I think I busted this. -Ossama
- if test "$prev" = dlprefiles; then
- # Preload the old-style object.
- dlprefiles="$dlprefiles $pic_object"
- prev=
- fi
-
- # A PIC object.
- libobjs="$libobjs $pic_object"
- arg="$pic_object"
- fi
-
- # Non-PIC object.
- if test "$non_pic_object" != none; then
- # Prepend the subdirectory the object is found in.
- non_pic_object="$xdir$non_pic_object"
-
- # A standard non-PIC object
- non_pic_objects="$non_pic_objects $non_pic_object"
- if test -z "$pic_object" || test "$pic_object" = none ; then
- arg="$non_pic_object"
- fi
- else
- # If the PIC object exists, use it instead.
- # $xdir was prepended to $pic_object above.
- non_pic_object="$pic_object"
- non_pic_objects="$non_pic_objects $non_pic_object"
- fi
- else
- # Only an error if not doing a dry-run.
- if test -z "$run"; then
- $echo "$modename: \`$arg' is not a valid libtool object" 1>&2
- exit $EXIT_FAILURE
- else
- # Dry-run case.
-
- # Extract subdirectory from the argument.
- xdir=`$echo "X$arg" | $Xsed -e 's%/[^/]*$%%'`
- if test "X$xdir" = "X$arg"; then
- xdir=
- else
- xdir="$xdir/"
- fi
-
- pic_object=`$echo "X${xdir}${objdir}/${arg}" | $Xsed -e "$lo2o"`
- non_pic_object=`$echo "X${xdir}${arg}" | $Xsed -e "$lo2o"`
- libobjs="$libobjs $pic_object"
- non_pic_objects="$non_pic_objects $non_pic_object"
- fi
- fi
- done
- else
- $echo "$modename: link input file \`$save_arg' does not exist"
- exit $EXIT_FAILURE
- fi
- arg=$save_arg
- prev=
- continue
- ;;
- rpath | xrpath)
- # We need an absolute path.
- case $arg in
- [\\/]* | [A-Za-z]:[\\/]*) ;;
- *)
- $echo "$modename: only absolute run-paths are allowed" 1>&2
- exit $EXIT_FAILURE
- ;;
- esac
- if test "$prev" = rpath; then
- case "$rpath " in
- *" $arg "*) ;;
- *) rpath="$rpath $arg" ;;
- esac
- else
- case "$xrpath " in
- *" $arg "*) ;;
- *) xrpath="$xrpath $arg" ;;
- esac
- fi
- prev=
- continue
- ;;
- xcompiler)
- compiler_flags="$compiler_flags $qarg"
- prev=
- compile_command="$compile_command $qarg"
- finalize_command="$finalize_command $qarg"
- continue
- ;;
- xlinker)
- linker_flags="$linker_flags $qarg"
- compiler_flags="$compiler_flags $wl$qarg"
- prev=
- compile_command="$compile_command $wl$qarg"
- finalize_command="$finalize_command $wl$qarg"
- continue
- ;;
- xcclinker)
- linker_flags="$linker_flags $qarg"
- compiler_flags="$compiler_flags $qarg"
- prev=
- compile_command="$compile_command $qarg"
- finalize_command="$finalize_command $qarg"
- continue
- ;;
- shrext)
- shrext_cmds="$arg"
- prev=
- continue
- ;;
- darwin_framework|darwin_framework_skip)
- test "$prev" = "darwin_framework" && compiler_flags="$compiler_flags $arg"
- compile_command="$compile_command $arg"
- finalize_command="$finalize_command $arg"
- prev=
- continue
- ;;
- *)
- eval "$prev=\"\$arg\""
- prev=
- continue
- ;;
- esac
- fi # test -n "$prev"
-
- prevarg="$arg"
-
- case $arg in
- -all-static)
- if test -n "$link_static_flag"; then
- compile_command="$compile_command $link_static_flag"
- finalize_command="$finalize_command $link_static_flag"
- fi
- continue
- ;;
-
- -allow-undefined)
- # FIXME: remove this flag sometime in the future.
- $echo "$modename: \`-allow-undefined' is deprecated because it is the default" 1>&2
- continue
- ;;
-
- -avoid-version)
- avoid_version=yes
- continue
- ;;
-
- -dlopen)
- prev=dlfiles
- continue
- ;;
-
- -dlpreopen)
- prev=dlprefiles
- continue
- ;;
-
- -export-dynamic)
- export_dynamic=yes
- continue
- ;;
-
- -export-symbols | -export-symbols-regex)
- if test -n "$export_symbols" || test -n "$export_symbols_regex"; then
- $echo "$modename: more than one -exported-symbols argument is not allowed"
- exit $EXIT_FAILURE
- fi
- if test "X$arg" = "X-export-symbols"; then
- prev=expsyms
- else
- prev=expsyms_regex
- fi
- continue
- ;;
-
- -framework|-arch|-isysroot)
- case " $CC " in
- *" ${arg} ${1} "* | *" ${arg} ${1} "*)
- prev=darwin_framework_skip ;;
- *) compiler_flags="$compiler_flags $arg"
- prev=darwin_framework ;;
- esac
- compile_command="$compile_command $arg"
- finalize_command="$finalize_command $arg"
- continue
- ;;
-
- -inst-prefix-dir)
- prev=inst_prefix
- continue
- ;;
-
- # The native IRIX linker understands -LANG:*, -LIST:* and -LNO:*
- # so, if we see these flags be careful not to treat them like -L
- -L[A-Z][A-Z]*:*)
- case $with_gcc/$host in
- no/*-*-irix* | /*-*-irix*)
- compile_command="$compile_command $arg"
- finalize_command="$finalize_command $arg"
- ;;
- esac
- continue
- ;;
-
- -L*)
- dir=`$echo "X$arg" | $Xsed -e 's/^-L//'`
- # We need an absolute path.
- case $dir in
- [\\/]* | [A-Za-z]:[\\/]*) ;;
- *)
- absdir=`cd "$dir" && pwd`
- if test -z "$absdir"; then
- $echo "$modename: cannot determine absolute directory name of \`$dir'" 1>&2
- absdir="$dir"
- notinst_path="$notinst_path $dir"
- fi
- dir="$absdir"
- ;;
- esac
- case "$deplibs " in
- *" -L$dir "*) ;;
- *)
- deplibs="$deplibs -L$dir"
- lib_search_path="$lib_search_path $dir"
- ;;
- esac
- case $host in
- *-*-cygwin* | *-*-mingw* | *-*-pw32* | *-*-os2*)
- testbindir=`$echo "X$dir" | $Xsed -e 's*/lib$*/bin*'`
- case :$dllsearchpath: in
- *":$dir:"*) ;;
- *) dllsearchpath="$dllsearchpath:$dir";;
- esac
- case :$dllsearchpath: in
- *":$testbindir:"*) ;;
- *) dllsearchpath="$dllsearchpath:$testbindir";;
- esac
- ;;
- esac
- continue
- ;;
-
- -l*)
- if test "X$arg" = "X-lc" || test "X$arg" = "X-lm"; then
- case $host in
- *-*-cygwin* | *-*-mingw* | *-*-pw32* | *-*-beos*)
- # These systems don't actually have a C or math library (as such)
- continue
- ;;
- *-*-os2*)
- # These systems don't actually have a C library (as such)
- test "X$arg" = "X-lc" && continue
- ;;
- *-*-openbsd* | *-*-freebsd* | *-*-dragonfly*)
- # Do not include libc due to us having libc/libc_r.
- test "X$arg" = "X-lc" && continue
- ;;
- *-*-rhapsody* | *-*-darwin1.[012])
- # Rhapsody C and math libraries are in the System framework
- deplibs="$deplibs -framework System"
- continue
- ;;
- *-*-sco3.2v5* | *-*-sco5v6*)
- # Causes problems with __ctype
- test "X$arg" = "X-lc" && continue
- ;;
- *-*-sysv4.2uw2* | *-*-sysv5* | *-*-unixware* | *-*-OpenUNIX*)
- # Compiler inserts libc in the correct place for threads to work
- test "X$arg" = "X-lc" && continue
- ;;
- esac
- elif test "X$arg" = "X-lc_r"; then
- case $host in
- *-*-openbsd* | *-*-freebsd* | *-*-dragonfly*)
- # Do not include libc_r directly, use -pthread flag.
- continue
- ;;
- esac
- fi
- deplibs="$deplibs $arg"
- continue
- ;;
-
- # Tru64 UNIX uses -model [arg] to determine the layout of C++
- # classes, name mangling, and exception handling.
- -model)
- compile_command="$compile_command $arg"
- compiler_flags="$compiler_flags $arg"
- finalize_command="$finalize_command $arg"
- prev=xcompiler
- continue
- ;;
-
- -mt|-mthreads|-kthread|-Kthread|-pthread|-pthreads|--thread-safe)
- compiler_flags="$compiler_flags $arg"
- compile_command="$compile_command $arg"
- finalize_command="$finalize_command $arg"
- continue
- ;;
-
- -module)
- module=yes
- continue
- ;;
-
- # -64, -mips[0-9] enable 64-bit mode on the SGI compiler
- # -r[0-9][0-9]* specifies the processor on the SGI compiler
- # -xarch=*, -xtarget=* enable 64-bit mode on the Sun compiler
- # +DA*, +DD* enable 64-bit mode on the HP compiler
- # -q* pass through compiler args for the IBM compiler
- # -m* pass through architecture-specific compiler args for GCC
- # -m*, -t[45]*, -txscale* pass through architecture-specific
- # compiler args for GCC
- # -pg pass through profiling flag for GCC
- # @file GCC response files
- -64|-mips[0-9]|-r[0-9][0-9]*|-xarch=*|-xtarget=*|+DA*|+DD*|-q*|-m*|-pg| \
- -t[45]*|-txscale*|@*)
-
- # Unknown arguments in both finalize_command and compile_command need
- # to be aesthetically quoted because they are evaled later.
- arg=`$echo "X$arg" | $Xsed -e "$sed_quote_subst"`
- case $arg in
- *[\[\~\#\^\&\*\(\)\{\}\|\;\<\>\?\'\ \ ]*|*]*|"")
- arg="\"$arg\""
- ;;
- esac
- compile_command="$compile_command $arg"
- finalize_command="$finalize_command $arg"
- compiler_flags="$compiler_flags $arg"
- continue
- ;;
-
- -shrext)
- prev=shrext
- continue
- ;;
-
- -no-fast-install)
- fast_install=no
- continue
- ;;
-
- -no-install)
- case $host in
- *-*-cygwin* | *-*-mingw* | *-*-pw32* | *-*-os2*)
- # The PATH hackery in wrapper scripts is required on Windows
- # in order for the loader to find any dlls it needs.
- $echo "$modename: warning: \`-no-install' is ignored for $host" 1>&2
- $echo "$modename: warning: assuming \`-no-fast-install' instead" 1>&2
- fast_install=no
- ;;
- *) no_install=yes ;;
- esac
- continue
- ;;
-
- -no-undefined)
- allow_undefined=no
- continue
- ;;
-
- -objectlist)
- prev=objectlist
- continue
- ;;
-
- -o) prev=output ;;
-
- -precious-files-regex)
- prev=precious_regex
- continue
- ;;
-
- -release)
- prev=release
- continue
- ;;
-
- -rpath)
- prev=rpath
- continue
- ;;
-
- -R)
- prev=xrpath
- continue
- ;;
-
- -R*)
- dir=`$echo "X$arg" | $Xsed -e 's/^-R//'`
- # We need an absolute path.
- case $dir in
- [\\/]* | [A-Za-z]:[\\/]*) ;;
- *)
- $echo "$modename: only absolute run-paths are allowed" 1>&2
- exit $EXIT_FAILURE
- ;;
- esac
- case "$xrpath " in
- *" $dir "*) ;;
- *) xrpath="$xrpath $dir" ;;
- esac
- continue
- ;;
-
- -static)
- # The effects of -static are defined in a previous loop.
- # We used to do the same as -all-static on platforms that
- # didn't have a PIC flag, but the assumption that the effects
- # would be equivalent was wrong. It would break on at least
- # Digital Unix and AIX.
- continue
- ;;
-
- -thread-safe)
- thread_safe=yes
- continue
- ;;
-
- -version-info)
- prev=vinfo
- continue
- ;;
- -version-number)
- prev=vinfo
- vinfo_number=yes
- continue
- ;;
-
- -Wc,*)
- args=`$echo "X$arg" | $Xsed -e "$sed_quote_subst" -e 's/^-Wc,//'`
- arg=
- save_ifs="$IFS"; IFS=','
- for flag in $args; do
- IFS="$save_ifs"
- case $flag in
- *[\[\~\#\^\&\*\(\)\{\}\|\;\<\>\?\'\ \ ]*|*]*|"")
- flag="\"$flag\""
- ;;
- esac
- arg="$arg $wl$flag"
- compiler_flags="$compiler_flags $flag"
- done
- IFS="$save_ifs"
- arg=`$echo "X$arg" | $Xsed -e "s/^ //"`
- ;;
-
- -Wl,*)
- args=`$echo "X$arg" | $Xsed -e "$sed_quote_subst" -e 's/^-Wl,//'`
- arg=
- save_ifs="$IFS"; IFS=','
- for flag in $args; do
- IFS="$save_ifs"
- case $flag in
- *[\[\~\#\^\&\*\(\)\{\}\|\;\<\>\?\'\ \ ]*|*]*|"")
- flag="\"$flag\""
- ;;
- esac
- arg="$arg $wl$flag"
- compiler_flags="$compiler_flags $wl$flag"
- linker_flags="$linker_flags $flag"
- done
- IFS="$save_ifs"
- arg=`$echo "X$arg" | $Xsed -e "s/^ //"`
- ;;
-
- -Xcompiler)
- prev=xcompiler
- continue
- ;;
-
- -Xlinker)
- prev=xlinker
- continue
- ;;
-
- -XCClinker)
- prev=xcclinker
- continue
- ;;
-
- # Some other compiler flag.
- -* | +*)
- # Unknown arguments in both finalize_command and compile_command need
- # to be aesthetically quoted because they are evaled later.
- arg=`$echo "X$arg" | $Xsed -e "$sed_quote_subst"`
- case $arg in
- *[\[\~\#\^\&\*\(\)\{\}\|\;\<\>\?\'\ \ ]*|*]*|"")
- arg="\"$arg\""
- ;;
- esac
- ;;
-
- *.$objext)
- # A standard object.
- objs="$objs $arg"
- ;;
-
- *.lo)
- # A libtool-controlled object.
-
- # Check to see that this really is a libtool object.
- if (${SED} -e '2q' $arg | grep "^# Generated by .*$PACKAGE") >/dev/null 2>&1; then
- pic_object=
- non_pic_object=
-
- # Read the .lo file
- # If there is no directory component, then add one.
- case $arg in
- */* | *\\*) . $arg ;;
- *) . ./$arg ;;
- esac
-
- if test -z "$pic_object" || \
- test -z "$non_pic_object" ||
- test "$pic_object" = none && \
- test "$non_pic_object" = none; then
- $echo "$modename: cannot find name of object for \`$arg'" 1>&2
- exit $EXIT_FAILURE
- fi
-
- # Extract subdirectory from the argument.
- xdir=`$echo "X$arg" | $Xsed -e 's%/[^/]*$%%'`
- if test "X$xdir" = "X$arg"; then
- xdir=
- else
- xdir="$xdir/"
- fi
-
- if test "$pic_object" != none; then
- # Prepend the subdirectory the object is found in.
- pic_object="$xdir$pic_object"
-
- if test "$prev" = dlfiles; then
- if test "$build_libtool_libs" = yes && test "$dlopen_support" = yes; then
- dlfiles="$dlfiles $pic_object"
- prev=
- continue
- else
- # If libtool objects are unsupported, then we need to preload.
- prev=dlprefiles
- fi
- fi
-
- # CHECK ME: I think I busted this. -Ossama
- if test "$prev" = dlprefiles; then
- # Preload the old-style object.
- dlprefiles="$dlprefiles $pic_object"
- prev=
- fi
-
- # A PIC object.
- libobjs="$libobjs $pic_object"
- arg="$pic_object"
- fi
-
- # Non-PIC object.
- if test "$non_pic_object" != none; then
- # Prepend the subdirectory the object is found in.
- non_pic_object="$xdir$non_pic_object"
-
- # A standard non-PIC object
- non_pic_objects="$non_pic_objects $non_pic_object"
- if test -z "$pic_object" || test "$pic_object" = none ; then
- arg="$non_pic_object"
- fi
- else
- # If the PIC object exists, use it instead.
- # $xdir was prepended to $pic_object above.
- non_pic_object="$pic_object"
- non_pic_objects="$non_pic_objects $non_pic_object"
- fi
- else
- # Only an error if not doing a dry-run.
- if test -z "$run"; then
- $echo "$modename: \`$arg' is not a valid libtool object" 1>&2
- exit $EXIT_FAILURE
- else
- # Dry-run case.
-
- # Extract subdirectory from the argument.
- xdir=`$echo "X$arg" | $Xsed -e 's%/[^/]*$%%'`
- if test "X$xdir" = "X$arg"; then
- xdir=
- else
- xdir="$xdir/"
- fi
-
- pic_object=`$echo "X${xdir}${objdir}/${arg}" | $Xsed -e "$lo2o"`
- non_pic_object=`$echo "X${xdir}${arg}" | $Xsed -e "$lo2o"`
- libobjs="$libobjs $pic_object"
- non_pic_objects="$non_pic_objects $non_pic_object"
- fi
- fi
- ;;
-
- *.$libext)
- # An archive.
- deplibs="$deplibs $arg"
- old_deplibs="$old_deplibs $arg"
- continue
- ;;
-
- *.la)
- # A libtool-controlled library.
-
- if test "$prev" = dlfiles; then
- # This library was specified with -dlopen.
- dlfiles="$dlfiles $arg"
- prev=
- elif test "$prev" = dlprefiles; then
- # The library was specified with -dlpreopen.
- dlprefiles="$dlprefiles $arg"
- prev=
- else
- deplibs="$deplibs $arg"
- fi
- continue
- ;;
-
- # Some other compiler argument.
- *)
- # Unknown arguments in both finalize_command and compile_command need
- # to be aesthetically quoted because they are evaled later.
- arg=`$echo "X$arg" | $Xsed -e "$sed_quote_subst"`
- case $arg in
- *[\[\~\#\^\&\*\(\)\{\}\|\;\<\>\?\'\ \ ]*|*]*|"")
- arg="\"$arg\""
- ;;
- esac
- ;;
- esac # arg
-
- # Now actually substitute the argument into the commands.
- if test -n "$arg"; then
- compile_command="$compile_command $arg"
- finalize_command="$finalize_command $arg"
- fi
- done # argument parsing loop
-
- if test -n "$prev"; then
- $echo "$modename: the \`$prevarg' option requires an argument" 1>&2
- $echo "$help" 1>&2
- exit $EXIT_FAILURE
- fi
-
- if test "$export_dynamic" = yes && test -n "$export_dynamic_flag_spec"; then
- eval arg=\"$export_dynamic_flag_spec\"
- compile_command="$compile_command $arg"
- finalize_command="$finalize_command $arg"
- fi
-
- oldlibs=
- # calculate the name of the file, without its directory
- outputname=`$echo "X$output" | $Xsed -e 's%^.*/%%'`
- libobjs_save="$libobjs"
-
- if test -n "$shlibpath_var"; then
- # get the directories listed in $shlibpath_var
- eval shlib_search_path=\`\$echo \"X\${$shlibpath_var}\" \| \$Xsed -e \'s/:/ /g\'\`
- else
- shlib_search_path=
- fi
- eval sys_lib_search_path=\"$sys_lib_search_path_spec\"
- eval sys_lib_dlsearch_path=\"$sys_lib_dlsearch_path_spec\"
-
- output_objdir=`$echo "X$output" | $Xsed -e 's%/[^/]*$%%'`
- if test "X$output_objdir" = "X$output"; then
- output_objdir="$objdir"
- else
- output_objdir="$output_objdir/$objdir"
- fi
- # Create the object directory.
- if test ! -d "$output_objdir"; then
- $show "$mkdir $output_objdir"
- $run $mkdir $output_objdir
- exit_status=$?
- if test "$exit_status" -ne 0 && test ! -d "$output_objdir"; then
- exit $exit_status
- fi
- fi
-
- # Determine the type of output
- case $output in
- "")
- $echo "$modename: you must specify an output file" 1>&2
- $echo "$help" 1>&2
- exit $EXIT_FAILURE
- ;;
- *.$libext) linkmode=oldlib ;;
- *.lo | *.$objext) linkmode=obj ;;
- *.la) linkmode=lib ;;
- *) linkmode=prog ;; # Anything else should be a program.
- esac
-
- case $host in
- *cygwin* | *mingw* | *pw32*)
- # don't eliminate duplications in $postdeps and $predeps
- duplicate_compiler_generated_deps=yes
- ;;
- *)
- duplicate_compiler_generated_deps=$duplicate_deps
- ;;
- esac
- specialdeplibs=
-
- libs=
- # Find all interdependent deplibs by searching for libraries
- # that are linked more than once (e.g. -la -lb -la)
- for deplib in $deplibs; do
- if test "X$duplicate_deps" = "Xyes" ; then
- case "$libs " in
- *" $deplib "*) specialdeplibs="$specialdeplibs $deplib" ;;
- esac
- fi
- libs="$libs $deplib"
- done
-
- if test "$linkmode" = lib; then
- libs="$predeps $libs $compiler_lib_search_path $postdeps"
-
- # Compute libraries that are listed more than once in $predeps
- # $postdeps and mark them as special (i.e., whose duplicates are
- # not to be eliminated).
- pre_post_deps=
- if test "X$duplicate_compiler_generated_deps" = "Xyes" ; then
- for pre_post_dep in $predeps $postdeps; do
- case "$pre_post_deps " in
- *" $pre_post_dep "*) specialdeplibs="$specialdeplibs $pre_post_deps" ;;
- esac
- pre_post_deps="$pre_post_deps $pre_post_dep"
- done
- fi
- pre_post_deps=
- fi
-
- deplibs=
- newdependency_libs=
- newlib_search_path=
- need_relink=no # whether we're linking any uninstalled libtool libraries
- notinst_deplibs= # not-installed libtool libraries
- case $linkmode in
- lib)
- passes="conv link"
- for file in $dlfiles $dlprefiles; do
- case $file in
- *.la) ;;
- *)
- $echo "$modename: libraries can \`-dlopen' only libtool libraries: $file" 1>&2
- exit $EXIT_FAILURE
- ;;
- esac
- done
- ;;
- prog)
- compile_deplibs=
- finalize_deplibs=
- alldeplibs=no
- newdlfiles=
- newdlprefiles=
- passes="conv scan dlopen dlpreopen link"
- ;;
- *) passes="conv"
- ;;
- esac
- for pass in $passes; do
- if test "$linkmode,$pass" = "lib,link" ||
- test "$linkmode,$pass" = "prog,scan"; then
- libs="$deplibs"
- deplibs=
- fi
- if test "$linkmode" = prog; then
- case $pass in
- dlopen) libs="$dlfiles" ;;
- dlpreopen) libs="$dlprefiles" ;;
- link) libs="$deplibs %DEPLIBS% $dependency_libs" ;;
- esac
- fi
- if test "$pass" = dlopen; then
- # Collect dlpreopened libraries
- save_deplibs="$deplibs"
- deplibs=
- fi
- for deplib in $libs; do
- lib=
- found=no
- case $deplib in
- -mt|-mthreads|-kthread|-Kthread|-pthread|-pthreads|--thread-safe)
- if test "$linkmode,$pass" = "prog,link"; then
- compile_deplibs="$deplib $compile_deplibs"
- finalize_deplibs="$deplib $finalize_deplibs"
- else
- compiler_flags="$compiler_flags $deplib"
- fi
- continue
- ;;
- -l*)
- if test "$linkmode" != lib && test "$linkmode" != prog; then
- $echo "$modename: warning: \`-l' is ignored for archives/objects" 1>&2
- continue
- fi
- name=`$echo "X$deplib" | $Xsed -e 's/^-l//'`
- for searchdir in $newlib_search_path $lib_search_path $sys_lib_search_path $shlib_search_path; do
- for search_ext in .la $std_shrext .so .a; do
- # Search the libtool library
- lib="$searchdir/lib${name}${search_ext}"
- if test -f "$lib"; then
- if test "$search_ext" = ".la"; then
- found=yes
- else
- found=no
- fi
- break 2
- fi
- done
- done
- if test "$found" != yes; then
- # deplib doesn't seem to be a libtool library
- if test "$linkmode,$pass" = "prog,link"; then
- compile_deplibs="$deplib $compile_deplibs"
- finalize_deplibs="$deplib $finalize_deplibs"
- else
- deplibs="$deplib $deplibs"
- test "$linkmode" = lib && newdependency_libs="$deplib $newdependency_libs"
- fi
- continue
- else # deplib is a libtool library
- # If $allow_libtool_libs_with_static_runtimes && $deplib is a stdlib,
- # We need to do some special things here, and not later.
- if test "X$allow_libtool_libs_with_static_runtimes" = "Xyes" ; then
- case " $predeps $postdeps " in
- *" $deplib "*)
- if (${SED} -e '2q' $lib |
- grep "^# Generated by .*$PACKAGE") >/dev/null 2>&1; then
- library_names=
- old_library=
- case $lib in
- */* | *\\*) . $lib ;;
- *) . ./$lib ;;
- esac
- for l in $old_library $library_names; do
- ll="$l"
- done
- if test "X$ll" = "X$old_library" ; then # only static version available
- found=no
- ladir=`$echo "X$lib" | $Xsed -e 's%/[^/]*$%%'`
- test "X$ladir" = "X$lib" && ladir="."
- lib=$ladir/$old_library
- if test "$linkmode,$pass" = "prog,link"; then
- compile_deplibs="$deplib $compile_deplibs"
- finalize_deplibs="$deplib $finalize_deplibs"
- else
- deplibs="$deplib $deplibs"
- test "$linkmode" = lib && newdependency_libs="$deplib $newdependency_libs"
- fi
- continue
- fi
- fi
- ;;
- *) ;;
- esac
- fi
- fi
- ;; # -l
- -L*)
- case $linkmode in
- lib)
- deplibs="$deplib $deplibs"
- test "$pass" = conv && continue
- newdependency_libs="$deplib $newdependency_libs"
- newlib_search_path="$newlib_search_path "`$echo "X$deplib" | $Xsed -e 's/^-L//'`
- ;;
- prog)
- if test "$pass" = conv; then
- deplibs="$deplib $deplibs"
- continue
- fi
- if test "$pass" = scan; then
- deplibs="$deplib $deplibs"
- else
- compile_deplibs="$deplib $compile_deplibs"
- finalize_deplibs="$deplib $finalize_deplibs"
- fi
- newlib_search_path="$newlib_search_path "`$echo "X$deplib" | $Xsed -e 's/^-L//'`
- ;;
- *)
- $echo "$modename: warning: \`-L' is ignored for archives/objects" 1>&2
- ;;
- esac # linkmode
- continue
- ;; # -L
- -R*)
- if test "$pass" = link; then
- dir=`$echo "X$deplib" | $Xsed -e 's/^-R//'`
- # Make sure the xrpath contains only unique directories.
- case "$xrpath " in
- *" $dir "*) ;;
- *) xrpath="$xrpath $dir" ;;
- esac
- fi
- deplibs="$deplib $deplibs"
- continue
- ;;
- *.la) lib="$deplib" ;;
- *.$libext)
- if test "$pass" = conv; then
- deplibs="$deplib $deplibs"
- continue
- fi
- case $linkmode in
- lib)
- valid_a_lib=no
- case $deplibs_check_method in
- match_pattern*)
- set dummy $deplibs_check_method
- match_pattern_regex=`expr "$deplibs_check_method" : "$2 \(.*\)"`
- if eval $echo \"$deplib\" 2>/dev/null \
- | $SED 10q \
- | $EGREP "$match_pattern_regex" > /dev/null; then
- valid_a_lib=yes
- fi
- ;;
- pass_all)
- valid_a_lib=yes
- ;;
- esac
- if test "$valid_a_lib" != yes; then
- $echo
- $echo "*** Warning: Trying to link with static lib archive $deplib."
- $echo "*** I have the capability to make that library automatically link in when"
- $echo "*** you link to this library. But I can only do this if you have a"
- $echo "*** shared version of the library, which you do not appear to have"
- $echo "*** because the file extensions .$libext of this argument makes me believe"
- $echo "*** that it is just a static archive that I should not used here."
- else
- $echo
- $echo "*** Warning: Linking the shared library $output against the"
- $echo "*** static library $deplib is not portable!"
- deplibs="$deplib $deplibs"
- fi
- continue
- ;;
- prog)
- if test "$pass" != link; then
- deplibs="$deplib $deplibs"
- else
- compile_deplibs="$deplib $compile_deplibs"
- finalize_deplibs="$deplib $finalize_deplibs"
- fi
- continue
- ;;
- esac # linkmode
- ;; # *.$libext
- *.lo | *.$objext)
- if test "$pass" = conv; then
- deplibs="$deplib $deplibs"
- elif test "$linkmode" = prog; then
- if test "$pass" = dlpreopen || test "$dlopen_support" != yes || test "$build_libtool_libs" = no; then
- # If there is no dlopen support or we're linking statically,
- # we need to preload.
- newdlprefiles="$newdlprefiles $deplib"
- compile_deplibs="$deplib $compile_deplibs"
- finalize_deplibs="$deplib $finalize_deplibs"
- else
- newdlfiles="$newdlfiles $deplib"
- fi
- fi
- continue
- ;;
- %DEPLIBS%)
- alldeplibs=yes
- continue
- ;;
- esac # case $deplib
- if test "$found" = yes || test -f "$lib"; then :
- else
- $echo "$modename: cannot find the library \`$lib' or unhandled argument \`$deplib'" 1>&2
- exit $EXIT_FAILURE
- fi
-
- # Check to see that this really is a libtool archive.
- if (${SED} -e '2q' $lib | grep "^# Generated by .*$PACKAGE") >/dev/null 2>&1; then :
- else
- $echo "$modename: \`$lib' is not a valid libtool archive" 1>&2
- exit $EXIT_FAILURE
- fi
-
- ladir=`$echo "X$lib" | $Xsed -e 's%/[^/]*$%%'`
- test "X$ladir" = "X$lib" && ladir="."
-
- dlname=
- dlopen=
- dlpreopen=
- libdir=
- library_names=
- old_library=
- # If the library was installed with an old release of libtool,
- # it will not redefine variables installed, or shouldnotlink
- installed=yes
- shouldnotlink=no
- avoidtemprpath=
-
-
- # Read the .la file
- case $lib in
- */* | *\\*) . $lib ;;
- *) . ./$lib ;;
- esac
-
- if test "$linkmode,$pass" = "lib,link" ||
- test "$linkmode,$pass" = "prog,scan" ||
- { test "$linkmode" != prog && test "$linkmode" != lib; }; then
- test -n "$dlopen" && dlfiles="$dlfiles $dlopen"
- test -n "$dlpreopen" && dlprefiles="$dlprefiles $dlpreopen"
- fi
-
- if test "$pass" = conv; then
- # Only check for convenience libraries
- deplibs="$lib $deplibs"
- if test -z "$libdir"; then
- if test -z "$old_library"; then
- $echo "$modename: cannot find name of link library for \`$lib'" 1>&2
- exit $EXIT_FAILURE
- fi
- # It is a libtool convenience library, so add in its objects.
- convenience="$convenience $ladir/$objdir/$old_library"
- old_convenience="$old_convenience $ladir/$objdir/$old_library"
- tmp_libs=
- for deplib in $dependency_libs; do
- deplibs="$deplib $deplibs"
- if test "X$duplicate_deps" = "Xyes" ; then
- case "$tmp_libs " in
- *" $deplib "*) specialdeplibs="$specialdeplibs $deplib" ;;
- esac
- fi
- tmp_libs="$tmp_libs $deplib"
- done
- elif test "$linkmode" != prog && test "$linkmode" != lib; then
- $echo "$modename: \`$lib' is not a convenience library" 1>&2
- exit $EXIT_FAILURE
- fi
- continue
- fi # $pass = conv
-
-
- # Get the name of the library we link against.
- linklib=
- for l in $old_library $library_names; do
- linklib="$l"
- done
- if test -z "$linklib"; then
- $echo "$modename: cannot find name of link library for \`$lib'" 1>&2
- exit $EXIT_FAILURE
- fi
-
- # This library was specified with -dlopen.
- if test "$pass" = dlopen; then
- if test -z "$libdir"; then
- $echo "$modename: cannot -dlopen a convenience library: \`$lib'" 1>&2
- exit $EXIT_FAILURE
- fi
- if test -z "$dlname" ||
- test "$dlopen_support" != yes ||
- test "$build_libtool_libs" = no; then
- # If there is no dlname, no dlopen support or we're linking
- # statically, we need to preload. We also need to preload any
- # dependent libraries so libltdl's deplib preloader doesn't
- # bomb out in the load deplibs phase.
- dlprefiles="$dlprefiles $lib $dependency_libs"
- else
- newdlfiles="$newdlfiles $lib"
- fi
- continue
- fi # $pass = dlopen
-
- # We need an absolute path.
- case $ladir in
- [\\/]* | [A-Za-z]:[\\/]*) abs_ladir="$ladir" ;;
- *)
- abs_ladir=`cd "$ladir" && pwd`
- if test -z "$abs_ladir"; then
- $echo "$modename: warning: cannot determine absolute directory name of \`$ladir'" 1>&2
- $echo "$modename: passing it literally to the linker, although it might fail" 1>&2
- abs_ladir="$ladir"
- fi
- ;;
- esac
- laname=`$echo "X$lib" | $Xsed -e 's%^.*/%%'`
-
- # Find the relevant object directory and library name.
- if test "X$installed" = Xyes; then
- if test ! -f "$libdir/$linklib" && test -f "$abs_ladir/$linklib"; then
- $echo "$modename: warning: library \`$lib' was moved." 1>&2
- dir="$ladir"
- absdir="$abs_ladir"
- libdir="$abs_ladir"
- else
- dir="$libdir"
- absdir="$libdir"
- fi
- test "X$hardcode_automatic" = Xyes && avoidtemprpath=yes
- else
- if test ! -f "$ladir/$objdir/$linklib" && test -f "$abs_ladir/$linklib"; then
- dir="$ladir"
- absdir="$abs_ladir"
- # Remove this search path later
- notinst_path="$notinst_path $abs_ladir"
- else
- dir="$ladir/$objdir"
- absdir="$abs_ladir/$objdir"
- # Remove this search path later
- notinst_path="$notinst_path $abs_ladir"
- fi
- fi # $installed = yes
- name=`$echo "X$laname" | $Xsed -e 's/\.la$//' -e 's/^lib//'`
-
- # This library was specified with -dlpreopen.
- if test "$pass" = dlpreopen; then
- if test -z "$libdir"; then
- $echo "$modename: cannot -dlpreopen a convenience library: \`$lib'" 1>&2
- exit $EXIT_FAILURE
- fi
- # Prefer using a static library (so that no silly _DYNAMIC symbols
- # are required to link).
- if test -n "$old_library"; then
- newdlprefiles="$newdlprefiles $dir/$old_library"
- # Otherwise, use the dlname, so that lt_dlopen finds it.
- elif test -n "$dlname"; then
- newdlprefiles="$newdlprefiles $dir/$dlname"
- else
- newdlprefiles="$newdlprefiles $dir/$linklib"
- fi
- fi # $pass = dlpreopen
-
- if test -z "$libdir"; then
- # Link the convenience library
- if test "$linkmode" = lib; then
- deplibs="$dir/$old_library $deplibs"
- elif test "$linkmode,$pass" = "prog,link"; then
- compile_deplibs="$dir/$old_library $compile_deplibs"
- finalize_deplibs="$dir/$old_library $finalize_deplibs"
- else
- deplibs="$lib $deplibs" # used for prog,scan pass
- fi
- continue
- fi
-
-
- if test "$linkmode" = prog && test "$pass" != link; then
- newlib_search_path="$newlib_search_path $ladir"
- deplibs="$lib $deplibs"
-
- linkalldeplibs=no
- if test "$link_all_deplibs" != no || test -z "$library_names" ||
- test "$build_libtool_libs" = no; then
- linkalldeplibs=yes
- fi
-
- tmp_libs=
- for deplib in $dependency_libs; do
- case $deplib in
- -L*) newlib_search_path="$newlib_search_path "`$echo "X$deplib" | $Xsed -e 's/^-L//'`;; ### testsuite: skip nested quoting test
- esac
- # Need to link against all dependency_libs?
- if test "$linkalldeplibs" = yes; then
- deplibs="$deplib $deplibs"
- else
- # Need to hardcode shared library paths
- # or/and link against static libraries
- newdependency_libs="$deplib $newdependency_libs"
- fi
- if test "X$duplicate_deps" = "Xyes" ; then
- case "$tmp_libs " in
- *" $deplib "*) specialdeplibs="$specialdeplibs $deplib" ;;
- esac
- fi
- tmp_libs="$tmp_libs $deplib"
- done # for deplib
- continue
- fi # $linkmode = prog...
-
- if test "$linkmode,$pass" = "prog,link"; then
- if test -n "$library_names" &&
- { test "$prefer_static_libs" = no || test -z "$old_library"; }; then
- # We need to hardcode the library path
- if test -n "$shlibpath_var" && test -z "$avoidtemprpath" ; then
- # Make sure the rpath contains only unique directories.
- case "$temp_rpath " in
- *" $dir "*) ;;
- *" $absdir "*) ;;
- *) temp_rpath="$temp_rpath $absdir" ;;
- esac
- fi
-
- # Hardcode the library path.
- # Skip directories that are in the system default run-time
- # search path.
- case " $sys_lib_dlsearch_path " in
- *" $absdir "*) ;;
- *)
- case "$compile_rpath " in
- *" $absdir "*) ;;
- *) compile_rpath="$compile_rpath $absdir"
- esac
- ;;
- esac
- case " $sys_lib_dlsearch_path " in
- *" $libdir "*) ;;
- *)
- case "$finalize_rpath " in
- *" $libdir "*) ;;
- *) finalize_rpath="$finalize_rpath $libdir"
- esac
- ;;
- esac
- fi # $linkmode,$pass = prog,link...
-
- if test "$alldeplibs" = yes &&
- { test "$deplibs_check_method" = pass_all ||
- { test "$build_libtool_libs" = yes &&
- test -n "$library_names"; }; }; then
- # We only need to search for static libraries
- continue
- fi
- fi
-
- link_static=no # Whether the deplib will be linked statically
- use_static_libs=$prefer_static_libs
- if test "$use_static_libs" = built && test "$installed" = yes ; then
- use_static_libs=no
- fi
- if test -n "$library_names" &&
- { test "$use_static_libs" = no || test -z "$old_library"; }; then
- if test "$installed" = no; then
- notinst_deplibs="$notinst_deplibs $lib"
- need_relink=yes
- fi
- # This is a shared library
-
- # Warn about portability, can't link against -module's on
- # some systems (darwin)
- if test "$shouldnotlink" = yes && test "$pass" = link ; then
- $echo
- if test "$linkmode" = prog; then
- $echo "*** Warning: Linking the executable $output against the loadable module"
- else
- $echo "*** Warning: Linking the shared library $output against the loadable module"
- fi
- $echo "*** $linklib is not portable!"
- fi
- if test "$linkmode" = lib &&
- test "$hardcode_into_libs" = yes; then
- # Hardcode the library path.
- # Skip directories that are in the system default run-time
- # search path.
- case " $sys_lib_dlsearch_path " in
- *" $absdir "*) ;;
- *)
- case "$compile_rpath " in
- *" $absdir "*) ;;
- *) compile_rpath="$compile_rpath $absdir"
- esac
- ;;
- esac
- case " $sys_lib_dlsearch_path " in
- *" $libdir "*) ;;
- *)
- case "$finalize_rpath " in
- *" $libdir "*) ;;
- *) finalize_rpath="$finalize_rpath $libdir"
- esac
- ;;
- esac
- fi
-
- if test -n "$old_archive_from_expsyms_cmds"; then
- # figure out the soname
- set dummy $library_names
- realname="$2"
- shift; shift
- libname=`eval \\$echo \"$libname_spec\"`
- # use dlname if we got it. it's perfectly good, no?
- if test -n "$dlname"; then
- soname="$dlname"
- elif test -n "$soname_spec"; then
- # bleh windows
- case $host in
- *cygwin* | mingw*)
- major=`expr $current - $age`
- versuffix="-$major"
- ;;
- esac
- eval soname=\"$soname_spec\"
- else
- soname="$realname"
- fi
-
- # Make a new name for the extract_expsyms_cmds to use
- soroot="$soname"
- soname=`$echo $soroot | ${SED} -e 's/^.*\///'`
- newlib="libimp-`$echo $soname | ${SED} 's/^lib//;s/\.dll$//'`.a"
-
- # If the library has no export list, then create one now
- if test -f "$output_objdir/$soname-def"; then :
- else
- $show "extracting exported symbol list from \`$soname'"
- save_ifs="$IFS"; IFS='~'
- cmds=$extract_expsyms_cmds
- for cmd in $cmds; do
- IFS="$save_ifs"
- eval cmd=\"$cmd\"
- $show "$cmd"
- $run eval "$cmd" || exit $?
- done
- IFS="$save_ifs"
- fi
-
- # Create $newlib
- if test -f "$output_objdir/$newlib"; then :; else
- $show "generating import library for \`$soname'"
- save_ifs="$IFS"; IFS='~'
- cmds=$old_archive_from_expsyms_cmds
- for cmd in $cmds; do
- IFS="$save_ifs"
- eval cmd=\"$cmd\"
- $show "$cmd"
- $run eval "$cmd" || exit $?
- done
- IFS="$save_ifs"
- fi
- # make sure the library variables are pointing to the new library
- dir=$output_objdir
- linklib=$newlib
- fi # test -n "$old_archive_from_expsyms_cmds"
-
- if test "$linkmode" = prog || test "$mode" != relink; then
- add_shlibpath=
- add_dir=
- add=
- lib_linked=yes
- case $hardcode_action in
- immediate | unsupported)
- if test "$hardcode_direct" = no; then
- add="$dir/$linklib"
- case $host in
- *-*-sco3.2v5.0.[024]*) add_dir="-L$dir" ;;
- *-*-sysv4*uw2*) add_dir="-L$dir" ;;
- *-*-sysv5OpenUNIX* | *-*-sysv5UnixWare7.[01].[10]* | \
- *-*-unixware7*) add_dir="-L$dir" ;;
- *-*-darwin* )
- # if the lib is a module then we can not link against
- # it, someone is ignoring the new warnings I added
- if /usr/bin/file -L $add 2> /dev/null |
- $EGREP ": [^:]* bundle" >/dev/null ; then
- $echo "** Warning, lib $linklib is a module, not a shared library"
- if test -z "$old_library" ; then
- $echo
- $echo "** And there doesn't seem to be a static archive available"
- $echo "** The link will probably fail, sorry"
- else
- add="$dir/$old_library"
- fi
- fi
- esac
- elif test "$hardcode_minus_L" = no; then
- case $host in
- *-*-sunos*) add_shlibpath="$dir" ;;
- esac
- add_dir="-L$dir"
- add="-l$name"
- elif test "$hardcode_shlibpath_var" = no; then
- add_shlibpath="$dir"
- add="-l$name"
- else
- lib_linked=no
- fi
- ;;
- relink)
- if test "$hardcode_direct" = yes; then
- add="$dir/$linklib"
- elif test "$hardcode_minus_L" = yes; then
- add_dir="-L$dir"
- # Try looking first in the location we're being installed to.
- if test -n "$inst_prefix_dir"; then
- case $libdir in
- [\\/]*)
- add_dir="$add_dir -L$inst_prefix_dir$libdir"
- ;;
- esac
- fi
- add="-l$name"
- elif test "$hardcode_shlibpath_var" = yes; then
- add_shlibpath="$dir"
- add="-l$name"
- else
- lib_linked=no
- fi
- ;;
- *) lib_linked=no ;;
- esac
-
- if test "$lib_linked" != yes; then
- $echo "$modename: configuration error: unsupported hardcode properties"
- exit $EXIT_FAILURE
- fi
-
- if test -n "$add_shlibpath"; then
- case :$compile_shlibpath: in
- *":$add_shlibpath:"*) ;;
- *) compile_shlibpath="$compile_shlibpath$add_shlibpath:" ;;
- esac
- fi
- if test "$linkmode" = prog; then
- test -n "$add_dir" && compile_deplibs="$add_dir $compile_deplibs"
- test -n "$add" && compile_deplibs="$add $compile_deplibs"
- else
- test -n "$add_dir" && deplibs="$add_dir $deplibs"
- test -n "$add" && deplibs="$add $deplibs"
- if test "$hardcode_direct" != yes && \
- test "$hardcode_minus_L" != yes && \
- test "$hardcode_shlibpath_var" = yes; then
- case :$finalize_shlibpath: in
- *":$libdir:"*) ;;
- *) finalize_shlibpath="$finalize_shlibpath$libdir:" ;;
- esac
- fi
- fi
- fi
-
- if test "$linkmode" = prog || test "$mode" = relink; then
- add_shlibpath=
- add_dir=
- add=
- # Finalize command for both is simple: just hardcode it.
- if test "$hardcode_direct" = yes; then
- add="$libdir/$linklib"
- elif test "$hardcode_minus_L" = yes; then
- add_dir="-L$libdir"
- add="-l$name"
- elif test "$hardcode_shlibpath_var" = yes; then
- case :$finalize_shlibpath: in
- *":$libdir:"*) ;;
- *) finalize_shlibpath="$finalize_shlibpath$libdir:" ;;
- esac
- add="-l$name"
- elif test "$hardcode_automatic" = yes; then
- if test -n "$inst_prefix_dir" &&
- test -f "$inst_prefix_dir$libdir/$linklib" ; then
- add="$inst_prefix_dir$libdir/$linklib"
- else
- add="$libdir/$linklib"
- fi
- else
- # We cannot seem to hardcode it, guess we'll fake it.
- add_dir="-L$libdir"
- # Try looking first in the location we're being installed to.
- if test -n "$inst_prefix_dir"; then
- case $libdir in
- [\\/]*)
- add_dir="$add_dir -L$inst_prefix_dir$libdir"
- ;;
- esac
- fi
- add="-l$name"
- fi
-
- if test "$linkmode" = prog; then
- test -n "$add_dir" && finalize_deplibs="$add_dir $finalize_deplibs"
- test -n "$add" && finalize_deplibs="$add $finalize_deplibs"
- else
- test -n "$add_dir" && deplibs="$add_dir $deplibs"
- test -n "$add" && deplibs="$add $deplibs"
- fi
- fi
- elif test "$linkmode" = prog; then
- # Here we assume that one of hardcode_direct or hardcode_minus_L
- # is not unsupported. This is valid on all known static and
- # shared platforms.
- if test "$hardcode_direct" != unsupported; then
- test -n "$old_library" && linklib="$old_library"
- compile_deplibs="$dir/$linklib $compile_deplibs"
- finalize_deplibs="$dir/$linklib $finalize_deplibs"
- else
- compile_deplibs="-l$name -L$dir $compile_deplibs"
- finalize_deplibs="-l$name -L$dir $finalize_deplibs"
- fi
- elif test "$build_libtool_libs" = yes; then
- # Not a shared library
- if test "$deplibs_check_method" != pass_all; then
- # We're trying link a shared library against a static one
- # but the system doesn't support it.
-
- # Just print a warning and add the library to dependency_libs so
- # that the program can be linked against the static library.
- $echo
- $echo "*** Warning: This system can not link to static lib archive $lib."
- $echo "*** I have the capability to make that library automatically link in when"
- $echo "*** you link to this library. But I can only do this if you have a"
- $echo "*** shared version of the library, which you do not appear to have."
- if test "$module" = yes; then
- $echo "*** But as you try to build a module library, libtool will still create "
- $echo "*** a static module, that should work as long as the dlopening application"
- $echo "*** is linked with the -dlopen flag to resolve symbols at runtime."
- if test -z "$global_symbol_pipe"; then
- $echo
- $echo "*** However, this would only work if libtool was able to extract symbol"
- $echo "*** lists from a program, using \`nm' or equivalent, but libtool could"
- $echo "*** not find such a program. So, this module is probably useless."
- $echo "*** \`nm' from GNU binutils and a full rebuild may help."
- fi
- if test "$build_old_libs" = no; then
- build_libtool_libs=module
- build_old_libs=yes
- else
- build_libtool_libs=no
- fi
- fi
- else
- deplibs="$dir/$old_library $deplibs"
- link_static=yes
- fi
- fi # link shared/static library?
-
- if test "$linkmode" = lib; then
- if test -n "$dependency_libs" &&
- { test "$hardcode_into_libs" != yes ||
- test "$build_old_libs" = yes ||
- test "$link_static" = yes; }; then
- # Extract -R from dependency_libs
- temp_deplibs=
- for libdir in $dependency_libs; do
- case $libdir in
- -R*) temp_xrpath=`$echo "X$libdir" | $Xsed -e 's/^-R//'`
- case " $xrpath " in
- *" $temp_xrpath "*) ;;
- *) xrpath="$xrpath $temp_xrpath";;
- esac;;
- *) temp_deplibs="$temp_deplibs $libdir";;
- esac
- done
- dependency_libs="$temp_deplibs"
- fi
-
- newlib_search_path="$newlib_search_path $absdir"
- # Link against this library
- test "$link_static" = no && newdependency_libs="$abs_ladir/$laname $newdependency_libs"
- # ... and its dependency_libs
- tmp_libs=
- for deplib in $dependency_libs; do
- newdependency_libs="$deplib $newdependency_libs"
- if test "X$duplicate_deps" = "Xyes" ; then
- case "$tmp_libs " in
- *" $deplib "*) specialdeplibs="$specialdeplibs $deplib" ;;
- esac
- fi
- tmp_libs="$tmp_libs $deplib"
- done
-
- if test "$link_all_deplibs" != no; then
- # Add the search paths of all dependency libraries
- for deplib in $dependency_libs; do
- case $deplib in
- -L*) path="$deplib" ;;
- *.la)
- dir=`$echo "X$deplib" | $Xsed -e 's%/[^/]*$%%'`
- test "X$dir" = "X$deplib" && dir="."
- # We need an absolute path.
- case $dir in
- [\\/]* | [A-Za-z]:[\\/]*) absdir="$dir" ;;
- *)
- absdir=`cd "$dir" && pwd`
- if test -z "$absdir"; then
- $echo "$modename: warning: cannot determine absolute directory name of \`$dir'" 1>&2
- absdir="$dir"
- fi
- ;;
- esac
- if grep "^installed=no" $deplib > /dev/null; then
- path="$absdir/$objdir"
- else
- eval libdir=`${SED} -n -e 's/^libdir=\(.*\)$/\1/p' $deplib`
- if test -z "$libdir"; then
- $echo "$modename: \`$deplib' is not a valid libtool archive" 1>&2
- exit $EXIT_FAILURE
- fi
- if test "$absdir" != "$libdir"; then
- $echo "$modename: warning: \`$deplib' seems to be moved" 1>&2
- fi
- path="$absdir"
- fi
- depdepl=
- case $host in
- *-*-darwin*)
- # we do not want to link against static libs,
- # but need to link against shared
- eval deplibrary_names=`${SED} -n -e 's/^library_names=\(.*\)$/\1/p' $deplib`
- if test -n "$deplibrary_names" ; then
- for tmp in $deplibrary_names ; do
- depdepl=$tmp
- done
- if test -f "$path/$depdepl" ; then
- depdepl="$path/$depdepl"
- fi
- # do not add paths which are already there
- case " $newlib_search_path " in
- *" $path "*) ;;
- *) newlib_search_path="$newlib_search_path $path";;
- esac
- fi
- path=""
- ;;
- *)
- path="-L$path"
- ;;
- esac
- ;;
- -l*)
- case $host in
- *-*-darwin*)
- # Again, we only want to link against shared libraries
- eval tmp_libs=`$echo "X$deplib" | $Xsed -e "s,^\-l,,"`
- for tmp in $newlib_search_path ; do
- if test -f "$tmp/lib$tmp_libs.dylib" ; then
- eval depdepl="$tmp/lib$tmp_libs.dylib"
- break
- fi
- done
- path=""
- ;;
- *) continue ;;
- esac
- ;;
- *) continue ;;
- esac
- case " $deplibs " in
- *" $path "*) ;;
- *) deplibs="$path $deplibs" ;;
- esac
- case " $deplibs " in
- *" $depdepl "*) ;;
- *) deplibs="$depdepl $deplibs" ;;
- esac
- done
- fi # link_all_deplibs != no
- fi # linkmode = lib
- done # for deplib in $libs
- dependency_libs="$newdependency_libs"
- if test "$pass" = dlpreopen; then
- # Link the dlpreopened libraries before other libraries
- for deplib in $save_deplibs; do
- deplibs="$deplib $deplibs"
- done
- fi
- if test "$pass" != dlopen; then
- if test "$pass" != conv; then
- # Make sure lib_search_path contains only unique directories.
- lib_search_path=
- for dir in $newlib_search_path; do
- case "$lib_search_path " in
- *" $dir "*) ;;
- *) lib_search_path="$lib_search_path $dir" ;;
- esac
- done
- newlib_search_path=
- fi
-
- if test "$linkmode,$pass" != "prog,link"; then
- vars="deplibs"
- else
- vars="compile_deplibs finalize_deplibs"
- fi
- for var in $vars dependency_libs; do
- # Add libraries to $var in reverse order
- eval tmp_libs=\"\$$var\"
- new_libs=
- for deplib in $tmp_libs; do
- # FIXME: Pedantically, this is the right thing to do, so
- # that some nasty dependency loop isn't accidentally
- # broken:
- #new_libs="$deplib $new_libs"
- # Pragmatically, this seems to cause very few problems in
- # practice:
- case $deplib in
- -L*) new_libs="$deplib $new_libs" ;;
- -R*) ;;
- *)
- # And here is the reason: when a library appears more
- # than once as an explicit dependence of a library, or
- # is implicitly linked in more than once by the
- # compiler, it is considered special, and multiple
- # occurrences thereof are not removed. Compare this
- # with having the same library being listed as a
- # dependency of multiple other libraries: in this case,
- # we know (pedantically, we assume) the library does not
- # need to be listed more than once, so we keep only the
- # last copy. This is not always right, but it is rare
- # enough that we require users that really mean to play
- # such unportable linking tricks to link the library
- # using -Wl,-lname, so that libtool does not consider it
- # for duplicate removal.
- case " $specialdeplibs " in
- *" $deplib "*) new_libs="$deplib $new_libs" ;;
- *)
- case " $new_libs " in
- *" $deplib "*) ;;
- *) new_libs="$deplib $new_libs" ;;
- esac
- ;;
- esac
- ;;
- esac
- done
- tmp_libs=
- for deplib in $new_libs; do
- case $deplib in
- -L*)
- case " $tmp_libs " in
- *" $deplib "*) ;;
- *) tmp_libs="$tmp_libs $deplib" ;;
- esac
- ;;
- *) tmp_libs="$tmp_libs $deplib" ;;
- esac
- done
- eval $var=\"$tmp_libs\"
- done # for var
- fi
- # Last step: remove runtime libs from dependency_libs
- # (they stay in deplibs)
- tmp_libs=
- for i in $dependency_libs ; do
- case " $predeps $postdeps $compiler_lib_search_path " in
- *" $i "*)
- i=""
- ;;
- esac
- if test -n "$i" ; then
- tmp_libs="$tmp_libs $i"
- fi
- done
- dependency_libs=$tmp_libs
- done # for pass
- if test "$linkmode" = prog; then
- dlfiles="$newdlfiles"
- dlprefiles="$newdlprefiles"
- fi
-
- case $linkmode in
- oldlib)
- if test -n "$deplibs"; then
- $echo "$modename: warning: \`-l' and \`-L' are ignored for archives" 1>&2
- fi
-
- if test -n "$dlfiles$dlprefiles" || test "$dlself" != no; then
- $echo "$modename: warning: \`-dlopen' is ignored for archives" 1>&2
- fi
-
- if test -n "$rpath"; then
- $echo "$modename: warning: \`-rpath' is ignored for archives" 1>&2
- fi
-
- if test -n "$xrpath"; then
- $echo "$modename: warning: \`-R' is ignored for archives" 1>&2
- fi
-
- if test -n "$vinfo"; then
- $echo "$modename: warning: \`-version-info/-version-number' is ignored for archives" 1>&2
- fi
-
- if test -n "$release"; then
- $echo "$modename: warning: \`-release' is ignored for archives" 1>&2
- fi
-
- if test -n "$export_symbols" || test -n "$export_symbols_regex"; then
- $echo "$modename: warning: \`-export-symbols' is ignored for archives" 1>&2
- fi
-
- # Now set the variables for building old libraries.
- build_libtool_libs=no
- oldlibs="$output"
- objs="$objs$old_deplibs"
- ;;
-
- lib)
- # Make sure we only generate libraries of the form `libNAME.la'.
- case $outputname in
- lib*)
- name=`$echo "X$outputname" | $Xsed -e 's/\.la$//' -e 's/^lib//'`
- eval shared_ext=\"$shrext_cmds\"
- eval libname=\"$libname_spec\"
- ;;
- *)
- if test "$module" = no; then
- $echo "$modename: libtool library \`$output' must begin with \`lib'" 1>&2
- $echo "$help" 1>&2
- exit $EXIT_FAILURE
- fi
- if test "$need_lib_prefix" != no; then
- # Add the "lib" prefix for modules if required
- name=`$echo "X$outputname" | $Xsed -e 's/\.la$//'`
- eval shared_ext=\"$shrext_cmds\"
- eval libname=\"$libname_spec\"
- else
- libname=`$echo "X$outputname" | $Xsed -e 's/\.la$//'`
- fi
- ;;
- esac
-
- if test -n "$objs"; then
- if test "$deplibs_check_method" != pass_all; then
- $echo "$modename: cannot build libtool library \`$output' from non-libtool objects on this host:$objs" 2>&1
- exit $EXIT_FAILURE
- else
- $echo
- $echo "*** Warning: Linking the shared library $output against the non-libtool"
- $echo "*** objects $objs is not portable!"
- libobjs="$libobjs $objs"
- fi
- fi
-
- if test "$dlself" != no; then
- $echo "$modename: warning: \`-dlopen self' is ignored for libtool libraries" 1>&2
- fi
-
- set dummy $rpath
- if test "$#" -gt 2; then
- $echo "$modename: warning: ignoring multiple \`-rpath's for a libtool library" 1>&2
- fi
- install_libdir="$2"
-
- oldlibs=
- if test -z "$rpath"; then
- if test "$build_libtool_libs" = yes; then
- # Building a libtool convenience library.
- # Some compilers have problems with a `.al' extension so
- # convenience libraries should have the same extension an
- # archive normally would.
- oldlibs="$output_objdir/$libname.$libext $oldlibs"
- build_libtool_libs=convenience
- build_old_libs=yes
- fi
-
- if test -n "$vinfo"; then
- $echo "$modename: warning: \`-version-info/-version-number' is ignored for convenience libraries" 1>&2
- fi
-
- if test -n "$release"; then
- $echo "$modename: warning: \`-release' is ignored for convenience libraries" 1>&2
- fi
- else
-
- # Parse the version information argument.
- save_ifs="$IFS"; IFS=':'
- set dummy $vinfo 0 0 0
- IFS="$save_ifs"
-
- if test -n "$8"; then
- $echo "$modename: too many parameters to \`-version-info'" 1>&2
- $echo "$help" 1>&2
- exit $EXIT_FAILURE
- fi
-
- # convert absolute version numbers to libtool ages
- # this retains compatibility with .la files and attempts
- # to make the code below a bit more comprehensible
-
- case $vinfo_number in
- yes)
- number_major="$2"
- number_minor="$3"
- number_revision="$4"
- #
- # There are really only two kinds -- those that
- # use the current revision as the major version
- # and those that subtract age and use age as
- # a minor version. But, then there is irix
- # which has an extra 1 added just for fun
- #
- case $version_type in
- darwin|linux|osf|windows)
- current=`expr $number_major + $number_minor`
- age="$number_minor"
- revision="$number_revision"
- ;;
- freebsd-aout|freebsd-elf|sunos)
- current="$number_major"
- revision="$number_minor"
- age="0"
- ;;
- irix|nonstopux)
- current=`expr $number_major + $number_minor - 1`
- age="$number_minor"
- revision="$number_minor"
- ;;
- esac
- ;;
- no)
- current="$2"
- revision="$3"
- age="$4"
- ;;
- esac
-
- # Check that each of the things are valid numbers.
- case $current in
- 0|[1-9]|[1-9][0-9]|[1-9][0-9][0-9]|[1-9][0-9][0-9][0-9]|[1-9][0-9][0-9][0-9][0-9]) ;;
- *)
- $echo "$modename: CURRENT \`$current' must be a nonnegative integer" 1>&2
- $echo "$modename: \`$vinfo' is not valid version information" 1>&2
- exit $EXIT_FAILURE
- ;;
- esac
-
- case $revision in
- 0|[1-9]|[1-9][0-9]|[1-9][0-9][0-9]|[1-9][0-9][0-9][0-9]|[1-9][0-9][0-9][0-9][0-9]) ;;
- *)
- $echo "$modename: REVISION \`$revision' must be a nonnegative integer" 1>&2
- $echo "$modename: \`$vinfo' is not valid version information" 1>&2
- exit $EXIT_FAILURE
- ;;
- esac
-
- case $age in
- 0|[1-9]|[1-9][0-9]|[1-9][0-9][0-9]|[1-9][0-9][0-9][0-9]|[1-9][0-9][0-9][0-9][0-9]) ;;
- *)
- $echo "$modename: AGE \`$age' must be a nonnegative integer" 1>&2
- $echo "$modename: \`$vinfo' is not valid version information" 1>&2
- exit $EXIT_FAILURE
- ;;
- esac
-
- if test "$age" -gt "$current"; then
- $echo "$modename: AGE \`$age' is greater than the current interface number \`$current'" 1>&2
- $echo "$modename: \`$vinfo' is not valid version information" 1>&2
- exit $EXIT_FAILURE
- fi
-
- # Calculate the version variables.
- major=
- versuffix=
- verstring=
- case $version_type in
- none) ;;
-
- darwin)
- # Like Linux, but with the current version available in
- # verstring for coding it into the library header
- major=.`expr $current - $age`
- versuffix="$major.$age.$revision"
- # Darwin ld doesn't like 0 for these options...
- minor_current=`expr $current + 1`
- verstring="${wl}-compatibility_version ${wl}$minor_current ${wl}-current_version ${wl}$minor_current.$revision"
- ;;
-
- freebsd-aout)
- major=".$current"
- versuffix=".$current.$revision";
- ;;
-
- freebsd-elf)
- major=".$current"
- versuffix=".$current";
- ;;
-
- irix | nonstopux)
- major=`expr $current - $age + 1`
-
- case $version_type in
- nonstopux) verstring_prefix=nonstopux ;;
- *) verstring_prefix=sgi ;;
- esac
- verstring="$verstring_prefix$major.$revision"
-
- # Add in all the interfaces that we are compatible with.
- loop=$revision
- while test "$loop" -ne 0; do
- iface=`expr $revision - $loop`
- loop=`expr $loop - 1`
- verstring="$verstring_prefix$major.$iface:$verstring"
- done
-
- # Before this point, $major must not contain `.'.
- major=.$major
- versuffix="$major.$revision"
- ;;
-
- linux)
- major=.`expr $current - $age`
- versuffix="$major.$age.$revision"
- ;;
-
- osf)
- major=.`expr $current - $age`
- versuffix=".$current.$age.$revision"
- verstring="$current.$age.$revision"
-
- # Add in all the interfaces that we are compatible with.
- loop=$age
- while test "$loop" -ne 0; do
- iface=`expr $current - $loop`
- loop=`expr $loop - 1`
- verstring="$verstring:${iface}.0"
- done
-
- # Make executables depend on our current version.
- verstring="$verstring:${current}.0"
- ;;
-
- sunos)
- major=".$current"
- versuffix=".$current.$revision"
- ;;
-
- windows)
- # Use '-' rather than '.', since we only want one
- # extension on DOS 8.3 filesystems.
- major=`expr $current - $age`
- versuffix="-$major"
- ;;
-
- *)
- $echo "$modename: unknown library version type \`$version_type'" 1>&2
- $echo "Fatal configuration error. See the $PACKAGE docs for more information." 1>&2
- exit $EXIT_FAILURE
- ;;
- esac
-
- # Clear the version info if we defaulted, and they specified a release.
- if test -z "$vinfo" && test -n "$release"; then
- major=
- case $version_type in
- darwin)
- # we can't check for "0.0" in archive_cmds due to quoting
- # problems, so we reset it completely
- verstring=
- ;;
- *)
- verstring="0.0"
- ;;
- esac
- if test "$need_version" = no; then
- versuffix=
- else
- versuffix=".0.0"
- fi
- fi
-
- # Remove version info from name if versioning should be avoided
- if test "$avoid_version" = yes && test "$need_version" = no; then
- major=
- versuffix=
- verstring=""
- fi
-
- # Check to see if the archive will have undefined symbols.
- if test "$allow_undefined" = yes; then
- if test "$allow_undefined_flag" = unsupported; then
- $echo "$modename: warning: undefined symbols not allowed in $host shared libraries" 1>&2
- build_libtool_libs=no
- build_old_libs=yes
- fi
- else
- # Don't allow undefined symbols.
- allow_undefined_flag="$no_undefined_flag"
- fi
- fi
-
- if test "$mode" != relink; then
- # Remove our outputs, but don't remove object files since they
- # may have been created when compiling PIC objects.
- removelist=
- tempremovelist=`$echo "$output_objdir/*"`
- for p in $tempremovelist; do
- case $p in
- *.$objext)
- ;;
- $output_objdir/$outputname | $output_objdir/$libname.* | $output_objdir/${libname}${release}.*)
- if test "X$precious_files_regex" != "X"; then
- if echo $p | $EGREP -e "$precious_files_regex" >/dev/null 2>&1
- then
- continue
- fi
- fi
- removelist="$removelist $p"
- ;;
- *) ;;
- esac
- done
- if test -n "$removelist"; then
- $show "${rm}r $removelist"
- $run ${rm}r $removelist
- fi
- fi
-
- # Now set the variables for building old libraries.
- if test "$build_old_libs" = yes && test "$build_libtool_libs" != convenience ; then
- oldlibs="$oldlibs $output_objdir/$libname.$libext"
-
- # Transform .lo files to .o files.
- oldobjs="$objs "`$echo "X$libobjs" | $SP2NL | $Xsed -e '/\.'${libext}'$/d' -e "$lo2o" | $NL2SP`
- fi
-
- # Eliminate all temporary directories.
- for path in $notinst_path; do
- lib_search_path=`$echo "$lib_search_path " | ${SED} -e "s% $path % %g"`
- deplibs=`$echo "$deplibs " | ${SED} -e "s% -L$path % %g"`
- dependency_libs=`$echo "$dependency_libs " | ${SED} -e "s% -L$path % %g"`
- done
-
- if test -n "$xrpath"; then
- # If the user specified any rpath flags, then add them.
- temp_xrpath=
- for libdir in $xrpath; do
- temp_xrpath="$temp_xrpath -R$libdir"
- case "$finalize_rpath " in
- *" $libdir "*) ;;
- *) finalize_rpath="$finalize_rpath $libdir" ;;
- esac
- done
- if test "$hardcode_into_libs" != yes || test "$build_old_libs" = yes; then
- dependency_libs="$temp_xrpath $dependency_libs"
- fi
- fi
-
- # Make sure dlfiles contains only unique files that won't be dlpreopened
- old_dlfiles="$dlfiles"
- dlfiles=
- for lib in $old_dlfiles; do
- case " $dlprefiles $dlfiles " in
- *" $lib "*) ;;
- *) dlfiles="$dlfiles $lib" ;;
- esac
- done
-
- # Make sure dlprefiles contains only unique files
- old_dlprefiles="$dlprefiles"
- dlprefiles=
- for lib in $old_dlprefiles; do
- case "$dlprefiles " in
- *" $lib "*) ;;
- *) dlprefiles="$dlprefiles $lib" ;;
- esac
- done
-
- if test "$build_libtool_libs" = yes; then
- if test -n "$rpath"; then
- case $host in
- *-*-cygwin* | *-*-mingw* | *-*-pw32* | *-*-os2* | *-*-beos*)
- # these systems don't actually have a c library (as such)!
- ;;
- *-*-rhapsody* | *-*-darwin1.[012])
- # Rhapsody C library is in the System framework
- deplibs="$deplibs -framework System"
- ;;
- *-*-netbsd*)
- # Don't link with libc until the a.out ld.so is fixed.
- ;;
- *-*-openbsd* | *-*-freebsd* | *-*-dragonfly*)
- # Do not include libc due to us having libc/libc_r.
- ;;
- *-*-sco3.2v5* | *-*-sco5v6*)
- # Causes problems with __ctype
- ;;
- *-*-sysv4.2uw2* | *-*-sysv5* | *-*-unixware* | *-*-OpenUNIX*)
- # Compiler inserts libc in the correct place for threads to work
- ;;
- *)
- # Add libc to deplibs on all other systems if necessary.
- if test "$build_libtool_need_lc" = "yes"; then
- deplibs="$deplibs -lc"
- fi
- ;;
- esac
- fi
-
- # Transform deplibs into only deplibs that can be linked in shared.
- name_save=$name
- libname_save=$libname
- release_save=$release
- versuffix_save=$versuffix
- major_save=$major
- # I'm not sure if I'm treating the release correctly. I think
- # release should show up in the -l (ie -lgmp5) so we don't want to
- # add it in twice. Is that correct?
- release=""
- versuffix=""
- major=""
- newdeplibs=
- droppeddeps=no
- case $deplibs_check_method in
- pass_all)
- # Don't check for shared/static. Everything works.
- # This might be a little naive. We might want to check
- # whether the library exists or not. But this is on
- # osf3 & osf4 and I'm not really sure... Just
- # implementing what was already the behavior.
- newdeplibs=$deplibs
- ;;
- test_compile)
- # This code stresses the "libraries are programs" paradigm to its
- # limits. Maybe even breaks it. We compile a program, linking it
- # against the deplibs as a proxy for the library. Then we can check
- # whether they linked in statically or dynamically with ldd.
- $rm conftest.c
- cat > conftest.c <<EOF
- int main() { return 0; }
-EOF
- $rm conftest
- $LTCC $LTCFLAGS -o conftest conftest.c $deplibs
- if test "$?" -eq 0 ; then
- ldd_output=`ldd conftest`
- for i in $deplibs; do
- name=`expr $i : '-l\(.*\)'`
- # If $name is empty we are operating on a -L argument.
- if test "$name" != "" && test "$name" -ne "0"; then
- if test "X$allow_libtool_libs_with_static_runtimes" = "Xyes" ; then
- case " $predeps $postdeps " in
- *" $i "*)
- newdeplibs="$newdeplibs $i"
- i=""
- ;;
- esac
- fi
- if test -n "$i" ; then
- libname=`eval \\$echo \"$libname_spec\"`
- deplib_matches=`eval \\$echo \"$library_names_spec\"`
- set dummy $deplib_matches
- deplib_match=$2
- if test `expr "$ldd_output" : ".*$deplib_match"` -ne 0 ; then
- newdeplibs="$newdeplibs $i"
- else
- droppeddeps=yes
- $echo
- $echo "*** Warning: dynamic linker does not accept needed library $i."
- $echo "*** I have the capability to make that library automatically link in when"
- $echo "*** you link to this library. But I can only do this if you have a"
- $echo "*** shared version of the library, which I believe you do not have"
- $echo "*** because a test_compile did reveal that the linker did not use it for"
- $echo "*** its dynamic dependency list that programs get resolved with at runtime."
- fi
- fi
- else
- newdeplibs="$newdeplibs $i"
- fi
- done
- else
- # Error occurred in the first compile. Let's try to salvage
- # the situation: Compile a separate program for each library.
- for i in $deplibs; do
- name=`expr $i : '-l\(.*\)'`
- # If $name is empty we are operating on a -L argument.
- if test "$name" != "" && test "$name" != "0"; then
- $rm conftest
- $LTCC $LTCFLAGS -o conftest conftest.c $i
- # Did it work?
- if test "$?" -eq 0 ; then
- ldd_output=`ldd conftest`
- if test "X$allow_libtool_libs_with_static_runtimes" = "Xyes" ; then
- case " $predeps $postdeps " in
- *" $i "*)
- newdeplibs="$newdeplibs $i"
- i=""
- ;;
- esac
- fi
- if test -n "$i" ; then
- libname=`eval \\$echo \"$libname_spec\"`
- deplib_matches=`eval \\$echo \"$library_names_spec\"`
- set dummy $deplib_matches
- deplib_match=$2
- if test `expr "$ldd_output" : ".*$deplib_match"` -ne 0 ; then
- newdeplibs="$newdeplibs $i"
- else
- droppeddeps=yes
- $echo
- $echo "*** Warning: dynamic linker does not accept needed library $i."
- $echo "*** I have the capability to make that library automatically link in when"
- $echo "*** you link to this library. But I can only do this if you have a"
- $echo "*** shared version of the library, which you do not appear to have"
- $echo "*** because a test_compile did reveal that the linker did not use this one"
- $echo "*** as a dynamic dependency that programs can get resolved with at runtime."
- fi
- fi
- else
- droppeddeps=yes
- $echo
- $echo "*** Warning! Library $i is needed by this library but I was not able to"
- $echo "*** make it link in! You will probably need to install it or some"
- $echo "*** library that it depends on before this library will be fully"
- $echo "*** functional. Installing it before continuing would be even better."
- fi
- else
- newdeplibs="$newdeplibs $i"
- fi
- done
- fi
- ;;
- file_magic*)
- set dummy $deplibs_check_method
- file_magic_regex=`expr "$deplibs_check_method" : "$2 \(.*\)"`
- for a_deplib in $deplibs; do
- name=`expr $a_deplib : '-l\(.*\)'`
- # If $name is empty we are operating on a -L argument.
- if test "$name" != "" && test "$name" != "0"; then
- if test "X$allow_libtool_libs_with_static_runtimes" = "Xyes" ; then
- case " $predeps $postdeps " in
- *" $a_deplib "*)
- newdeplibs="$newdeplibs $a_deplib"
- a_deplib=""
- ;;
- esac
- fi
- if test -n "$a_deplib" ; then
- libname=`eval \\$echo \"$libname_spec\"`
- for i in $lib_search_path $sys_lib_search_path $shlib_search_path; do
- potential_libs=`ls $i/$libname[.-]* 2>/dev/null`
- for potent_lib in $potential_libs; do
- # Follow soft links.
- if ls -lLd "$potent_lib" 2>/dev/null \
- | grep " -> " >/dev/null; then
- continue
- fi
- # The statement above tries to avoid entering an
- # endless loop below, in case of cyclic links.
- # We might still enter an endless loop, since a link
- # loop can be closed while we follow links,
- # but so what?
- potlib="$potent_lib"
- while test -h "$potlib" 2>/dev/null; do
- potliblink=`ls -ld $potlib | ${SED} 's/.* -> //'`
- case $potliblink in
- [\\/]* | [A-Za-z]:[\\/]*) potlib="$potliblink";;
- *) potlib=`$echo "X$potlib" | $Xsed -e 's,[^/]*$,,'`"$potliblink";;
- esac
- done
- if eval $file_magic_cmd \"\$potlib\" 2>/dev/null \
- | ${SED} 10q \
- | $EGREP "$file_magic_regex" > /dev/null; then
- newdeplibs="$newdeplibs $a_deplib"
- a_deplib=""
- break 2
- fi
- done
- done
- fi
- if test -n "$a_deplib" ; then
- droppeddeps=yes
- $echo
- $echo "*** Warning: linker path does not have real file for library $a_deplib."
- $echo "*** I have the capability to make that library automatically link in when"
- $echo "*** you link to this library. But I can only do this if you have a"
- $echo "*** shared version of the library, which you do not appear to have"
- $echo "*** because I did check the linker path looking for a file starting"
- if test -z "$potlib" ; then
- $echo "*** with $libname but no candidates were found. (...for file magic test)"
- else
- $echo "*** with $libname and none of the candidates passed a file format test"
- $echo "*** using a file magic. Last file checked: $potlib"
- fi
- fi
- else
- # Add a -L argument.
- newdeplibs="$newdeplibs $a_deplib"
- fi
- done # Gone through all deplibs.
- ;;
- match_pattern*)
- set dummy $deplibs_check_method
- match_pattern_regex=`expr "$deplibs_check_method" : "$2 \(.*\)"`
- for a_deplib in $deplibs; do
- name=`expr $a_deplib : '-l\(.*\)'`
- # If $name is empty we are operating on a -L argument.
- if test -n "$name" && test "$name" != "0"; then
- if test "X$allow_libtool_libs_with_static_runtimes" = "Xyes" ; then
- case " $predeps $postdeps " in
- *" $a_deplib "*)
- newdeplibs="$newdeplibs $a_deplib"
- a_deplib=""
- ;;
- esac
- fi
- if test -n "$a_deplib" ; then
- libname=`eval \\$echo \"$libname_spec\"`
- for i in $lib_search_path $sys_lib_search_path $shlib_search_path; do
- potential_libs=`ls $i/$libname[.-]* 2>/dev/null`
- for potent_lib in $potential_libs; do
- potlib="$potent_lib" # see symlink-check above in file_magic test
- if eval $echo \"$potent_lib\" 2>/dev/null \
- | ${SED} 10q \
- | $EGREP "$match_pattern_regex" > /dev/null; then
- newdeplibs="$newdeplibs $a_deplib"
- a_deplib=""
- break 2
- fi
- done
- done
- fi
- if test -n "$a_deplib" ; then
- droppeddeps=yes
- $echo
- $echo "*** Warning: linker path does not have real file for library $a_deplib."
- $echo "*** I have the capability to make that library automatically link in when"
- $echo "*** you link to this library. But I can only do this if you have a"
- $echo "*** shared version of the library, which you do not appear to have"
- $echo "*** because I did check the linker path looking for a file starting"
- if test -z "$potlib" ; then
- $echo "*** with $libname but no candidates were found. (...for regex pattern test)"
- else
- $echo "*** with $libname and none of the candidates passed a file format test"
- $echo "*** using a regex pattern. Last file checked: $potlib"
- fi
- fi
- else
- # Add a -L argument.
- newdeplibs="$newdeplibs $a_deplib"
- fi
- done # Gone through all deplibs.
- ;;
- none | unknown | *)
- newdeplibs=""
- tmp_deplibs=`$echo "X $deplibs" | $Xsed -e 's/ -lc$//' \
- -e 's/ -[LR][^ ]*//g'`
- if test "X$allow_libtool_libs_with_static_runtimes" = "Xyes" ; then
- for i in $predeps $postdeps ; do
- # can't use Xsed below, because $i might contain '/'
- tmp_deplibs=`$echo "X $tmp_deplibs" | ${SED} -e "1s,^X,," -e "s,$i,,"`
- done
- fi
- if $echo "X $tmp_deplibs" | $Xsed -e 's/[ ]//g' \
- | grep . >/dev/null; then
- $echo
- if test "X$deplibs_check_method" = "Xnone"; then
- $echo "*** Warning: inter-library dependencies are not supported in this platform."
- else
- $echo "*** Warning: inter-library dependencies are not known to be supported."
- fi
- $echo "*** All declared inter-library dependencies are being dropped."
- droppeddeps=yes
- fi
- ;;
- esac
- versuffix=$versuffix_save
- major=$major_save
- release=$release_save
- libname=$libname_save
- name=$name_save
-
- case $host in
- *-*-rhapsody* | *-*-darwin1.[012])
- # On Rhapsody replace the C library is the System framework
- newdeplibs=`$echo "X $newdeplibs" | $Xsed -e 's/ -lc / -framework System /'`
- ;;
- esac
-
- if test "$droppeddeps" = yes; then
- if test "$module" = yes; then
- $echo
- $echo "*** Warning: libtool could not satisfy all declared inter-library"
- $echo "*** dependencies of module $libname. Therefore, libtool will create"
- $echo "*** a static module, that should work as long as the dlopening"
- $echo "*** application is linked with the -dlopen flag."
- if test -z "$global_symbol_pipe"; then
- $echo
- $echo "*** However, this would only work if libtool was able to extract symbol"
- $echo "*** lists from a program, using \`nm' or equivalent, but libtool could"
- $echo "*** not find such a program. So, this module is probably useless."
- $echo "*** \`nm' from GNU binutils and a full rebuild may help."
- fi
- if test "$build_old_libs" = no; then
- oldlibs="$output_objdir/$libname.$libext"
- build_libtool_libs=module
- build_old_libs=yes
- else
- build_libtool_libs=no
- fi
- else
- $echo "*** The inter-library dependencies that have been dropped here will be"
- $echo "*** automatically added whenever a program is linked with this library"
- $echo "*** or is declared to -dlopen it."
-
- if test "$allow_undefined" = no; then
- $echo
- $echo "*** Since this library must not contain undefined symbols,"
- $echo "*** because either the platform does not support them or"
- $echo "*** it was explicitly requested with -no-undefined,"
- $echo "*** libtool will only create a static version of it."
- if test "$build_old_libs" = no; then
- oldlibs="$output_objdir/$libname.$libext"
- build_libtool_libs=module
- build_old_libs=yes
- else
- build_libtool_libs=no
- fi
- fi
- fi
- fi
- # Done checking deplibs!
- deplibs=$newdeplibs
- fi
-
-
- # move library search paths that coincide with paths to not yet
- # installed libraries to the beginning of the library search list
- new_libs=
- for path in $notinst_path; do
- case " $new_libs " in
- *" -L$path/$objdir "*) ;;
- *)
- case " $deplibs " in
- *" -L$path/$objdir "*)
- new_libs="$new_libs -L$path/$objdir" ;;
- esac
- ;;
- esac
- done
- for deplib in $deplibs; do
- case $deplib in
- -L*)
- case " $new_libs " in
- *" $deplib "*) ;;
- *) new_libs="$new_libs $deplib" ;;
- esac
- ;;
- *) new_libs="$new_libs $deplib" ;;
- esac
- done
- deplibs="$new_libs"
-
-
- # All the library-specific variables (install_libdir is set above).
- library_names=
- old_library=
- dlname=
-
- # Test again, we may have decided not to build it any more
- if test "$build_libtool_libs" = yes; then
- if test "$hardcode_into_libs" = yes; then
- # Hardcode the library paths
- hardcode_libdirs=
- dep_rpath=
- rpath="$finalize_rpath"
- test "$mode" != relink && rpath="$compile_rpath$rpath"
- for libdir in $rpath; do
- if test -n "$hardcode_libdir_flag_spec"; then
- if test -n "$hardcode_libdir_separator"; then
- if test -z "$hardcode_libdirs"; then
- hardcode_libdirs="$libdir"
- else
- # Just accumulate the unique libdirs.
- case $hardcode_libdir_separator$hardcode_libdirs$hardcode_libdir_separator in
- *"$hardcode_libdir_separator$libdir$hardcode_libdir_separator"*)
- ;;
- *)
- hardcode_libdirs="$hardcode_libdirs$hardcode_libdir_separator$libdir"
- ;;
- esac
- fi
- else
- eval flag=\"$hardcode_libdir_flag_spec\"
- dep_rpath="$dep_rpath $flag"
- fi
- elif test -n "$runpath_var"; then
- case "$perm_rpath " in
- *" $libdir "*) ;;
- *) perm_rpath="$perm_rpath $libdir" ;;
- esac
- fi
- done
- # Substitute the hardcoded libdirs into the rpath.
- if test -n "$hardcode_libdir_separator" &&
- test -n "$hardcode_libdirs"; then
- libdir="$hardcode_libdirs"
- if test -n "$hardcode_libdir_flag_spec_ld"; then
- eval dep_rpath=\"$hardcode_libdir_flag_spec_ld\"
- else
- eval dep_rpath=\"$hardcode_libdir_flag_spec\"
- fi
- fi
- if test -n "$runpath_var" && test -n "$perm_rpath"; then
- # We should set the runpath_var.
- rpath=
- for dir in $perm_rpath; do
- rpath="$rpath$dir:"
- done
- eval "$runpath_var='$rpath\$$runpath_var'; export $runpath_var"
- fi
- test -n "$dep_rpath" && deplibs="$dep_rpath $deplibs"
- fi
-
- shlibpath="$finalize_shlibpath"
- test "$mode" != relink && shlibpath="$compile_shlibpath$shlibpath"
- if test -n "$shlibpath"; then
- eval "$shlibpath_var='$shlibpath\$$shlibpath_var'; export $shlibpath_var"
- fi
-
- # Get the real and link names of the library.
- eval shared_ext=\"$shrext_cmds\"
- eval library_names=\"$library_names_spec\"
- set dummy $library_names
- realname="$2"
- shift; shift
-
- if test -n "$soname_spec"; then
- eval soname=\"$soname_spec\"
- else
- soname="$realname"
- fi
- if test -z "$dlname"; then
- dlname=$soname
- fi
-
- lib="$output_objdir/$realname"
- linknames=
- for link
- do
- linknames="$linknames $link"
- done
-
- # Use standard objects if they are pic
- test -z "$pic_flag" && libobjs=`$echo "X$libobjs" | $SP2NL | $Xsed -e "$lo2o" | $NL2SP`
-
- # Prepare the list of exported symbols
- if test -z "$export_symbols"; then
- if test "$always_export_symbols" = yes || test -n "$export_symbols_regex"; then
- $show "generating symbol list for \`$libname.la'"
- export_symbols="$output_objdir/$libname.exp"
- $run $rm $export_symbols
- cmds=$export_symbols_cmds
- save_ifs="$IFS"; IFS='~'
- for cmd in $cmds; do
- IFS="$save_ifs"
- eval cmd=\"$cmd\"
- if len=`expr "X$cmd" : ".*"` &&
- test "$len" -le "$max_cmd_len" || test "$max_cmd_len" -le -1; then
- $show "$cmd"
- $run eval "$cmd" || exit $?
- skipped_export=false
- else
- # The command line is too long to execute in one step.
- $show "using reloadable object file for export list..."
- skipped_export=:
- # Break out early, otherwise skipped_export may be
- # set to false by a later but shorter cmd.
- break
- fi
- done
- IFS="$save_ifs"
- if test -n "$export_symbols_regex"; then
- $show "$EGREP -e \"$export_symbols_regex\" \"$export_symbols\" > \"${export_symbols}T\""
- $run eval '$EGREP -e "$export_symbols_regex" "$export_symbols" > "${export_symbols}T"'
- $show "$mv \"${export_symbols}T\" \"$export_symbols\""
- $run eval '$mv "${export_symbols}T" "$export_symbols"'
- fi
- fi
- fi
-
- if test -n "$export_symbols" && test -n "$include_expsyms"; then
- $run eval '$echo "X$include_expsyms" | $SP2NL >> "$export_symbols"'
- fi
-
- tmp_deplibs=
- for test_deplib in $deplibs; do
- case " $convenience " in
- *" $test_deplib "*) ;;
- *)
- tmp_deplibs="$tmp_deplibs $test_deplib"
- ;;
- esac
- done
- deplibs="$tmp_deplibs"
-
- if test -n "$convenience"; then
- if test -n "$whole_archive_flag_spec"; then
- save_libobjs=$libobjs
- eval libobjs=\"\$libobjs $whole_archive_flag_spec\"
- else
- gentop="$output_objdir/${outputname}x"
- generated="$generated $gentop"
-
- func_extract_archives $gentop $convenience
- libobjs="$libobjs $func_extract_archives_result"
- fi
- fi
-
- if test "$thread_safe" = yes && test -n "$thread_safe_flag_spec"; then
- eval flag=\"$thread_safe_flag_spec\"
- linker_flags="$linker_flags $flag"
- fi
-
- # Make a backup of the uninstalled library when relinking
- if test "$mode" = relink; then
- $run eval '(cd $output_objdir && $rm ${realname}U && $mv $realname ${realname}U)' || exit $?
- fi
-
- # Do each of the archive commands.
- if test "$module" = yes && test -n "$module_cmds" ; then
- if test -n "$export_symbols" && test -n "$module_expsym_cmds"; then
- eval test_cmds=\"$module_expsym_cmds\"
- cmds=$module_expsym_cmds
- else
- eval test_cmds=\"$module_cmds\"
- cmds=$module_cmds
- fi
- else
- if test -n "$export_symbols" && test -n "$archive_expsym_cmds"; then
- eval test_cmds=\"$archive_expsym_cmds\"
- cmds=$archive_expsym_cmds
- else
- eval test_cmds=\"$archive_cmds\"
- cmds=$archive_cmds
- fi
- fi
-
- if test "X$skipped_export" != "X:" &&
- len=`expr "X$test_cmds" : ".*" 2>/dev/null` &&
- test "$len" -le "$max_cmd_len" || test "$max_cmd_len" -le -1; then
- :
- else
- # The command line is too long to link in one step, link piecewise.
- $echo "creating reloadable object files..."
-
- # Save the value of $output and $libobjs because we want to
- # use them later. If we have whole_archive_flag_spec, we
- # want to use save_libobjs as it was before
- # whole_archive_flag_spec was expanded, because we can't
- # assume the linker understands whole_archive_flag_spec.
- # This may have to be revisited, in case too many
- # convenience libraries get linked in and end up exceeding
- # the spec.
- if test -z "$convenience" || test -z "$whole_archive_flag_spec"; then
- save_libobjs=$libobjs
- fi
- save_output=$output
- output_la=`$echo "X$output" | $Xsed -e "$basename"`
-
- # Clear the reloadable object creation command queue and
- # initialize k to one.
- test_cmds=
- concat_cmds=
- objlist=
- delfiles=
- last_robj=
- k=1
- output=$output_objdir/$output_la-${k}.$objext
- # Loop over the list of objects to be linked.
- for obj in $save_libobjs
- do
- eval test_cmds=\"$reload_cmds $objlist $last_robj\"
- if test "X$objlist" = X ||
- { len=`expr "X$test_cmds" : ".*" 2>/dev/null` &&
- test "$len" -le "$max_cmd_len"; }; then
- objlist="$objlist $obj"
- else
- # The command $test_cmds is almost too long, add a
- # command to the queue.
- if test "$k" -eq 1 ; then
- # The first file doesn't have a previous command to add.
- eval concat_cmds=\"$reload_cmds $objlist $last_robj\"
- else
- # All subsequent reloadable object files will link in
- # the last one created.
- eval concat_cmds=\"\$concat_cmds~$reload_cmds $objlist $last_robj\"
- fi
- last_robj=$output_objdir/$output_la-${k}.$objext
- k=`expr $k + 1`
- output=$output_objdir/$output_la-${k}.$objext
- objlist=$obj
- len=1
- fi
- done
- # Handle the remaining objects by creating one last
- # reloadable object file. All subsequent reloadable object
- # files will link in the last one created.
- test -z "$concat_cmds" || concat_cmds=$concat_cmds~
- eval concat_cmds=\"\${concat_cmds}$reload_cmds $objlist $last_robj\"
-
- if ${skipped_export-false}; then
- $show "generating symbol list for \`$libname.la'"
- export_symbols="$output_objdir/$libname.exp"
- $run $rm $export_symbols
- libobjs=$output
- # Append the command to create the export file.
- eval concat_cmds=\"\$concat_cmds~$export_symbols_cmds\"
- fi
-
- # Set up a command to remove the reloadable object files
- # after they are used.
- i=0
- while test "$i" -lt "$k"
- do
- i=`expr $i + 1`
- delfiles="$delfiles $output_objdir/$output_la-${i}.$objext"
- done
-
- $echo "creating a temporary reloadable object file: $output"
-
- # Loop through the commands generated above and execute them.
- save_ifs="$IFS"; IFS='~'
- for cmd in $concat_cmds; do
- IFS="$save_ifs"
- $show "$cmd"
- $run eval "$cmd" || exit $?
- done
- IFS="$save_ifs"
-
- libobjs=$output
- # Restore the value of output.
- output=$save_output
-
- if test -n "$convenience" && test -n "$whole_archive_flag_spec"; then
- eval libobjs=\"\$libobjs $whole_archive_flag_spec\"
- fi
- # Expand the library linking commands again to reset the
- # value of $libobjs for piecewise linking.
-
- # Do each of the archive commands.
- if test "$module" = yes && test -n "$module_cmds" ; then
- if test -n "$export_symbols" && test -n "$module_expsym_cmds"; then
- cmds=$module_expsym_cmds
- else
- cmds=$module_cmds
- fi
- else
- if test -n "$export_symbols" && test -n "$archive_expsym_cmds"; then
- cmds=$archive_expsym_cmds
- else
- cmds=$archive_cmds
- fi
- fi
-
- # Append the command to remove the reloadable object files
- # to the just-reset $cmds.
- eval cmds=\"\$cmds~\$rm $delfiles\"
- fi
- save_ifs="$IFS"; IFS='~'
- for cmd in $cmds; do
- IFS="$save_ifs"
- eval cmd=\"$cmd\"
- $show "$cmd"
- $run eval "$cmd" || {
- lt_exit=$?
-
- # Restore the uninstalled library and exit
- if test "$mode" = relink; then
- $run eval '(cd $output_objdir && $rm ${realname}T && $mv ${realname}U $realname)'
- fi
-
- exit $lt_exit
- }
- done
- IFS="$save_ifs"
-
- # Restore the uninstalled library and exit
- if test "$mode" = relink; then
- $run eval '(cd $output_objdir && $rm ${realname}T && $mv $realname ${realname}T && $mv "$realname"U $realname)' || exit $?
-
- if test -n "$convenience"; then
- if test -z "$whole_archive_flag_spec"; then
- $show "${rm}r $gentop"
- $run ${rm}r "$gentop"
- fi
- fi
-
- exit $EXIT_SUCCESS
- fi
-
- # Create links to the real library.
- for linkname in $linknames; do
- if test "$realname" != "$linkname"; then
- $show "(cd $output_objdir && $rm $linkname && $LN_S $realname $linkname)"
- $run eval '(cd $output_objdir && $rm $linkname && $LN_S $realname $linkname)' || exit $?
- fi
- done
-
- # If -module or -export-dynamic was specified, set the dlname.
- if test "$module" = yes || test "$export_dynamic" = yes; then
- # On all known operating systems, these are identical.
- dlname="$soname"
- fi
- fi
- ;;
-
- obj)
- if test -n "$deplibs"; then
- $echo "$modename: warning: \`-l' and \`-L' are ignored for objects" 1>&2
- fi
-
- if test -n "$dlfiles$dlprefiles" || test "$dlself" != no; then
- $echo "$modename: warning: \`-dlopen' is ignored for objects" 1>&2
- fi
-
- if test -n "$rpath"; then
- $echo "$modename: warning: \`-rpath' is ignored for objects" 1>&2
- fi
-
- if test -n "$xrpath"; then
- $echo "$modename: warning: \`-R' is ignored for objects" 1>&2
- fi
-
- if test -n "$vinfo"; then
- $echo "$modename: warning: \`-version-info' is ignored for objects" 1>&2
- fi
-
- if test -n "$release"; then
- $echo "$modename: warning: \`-release' is ignored for objects" 1>&2
- fi
-
- case $output in
- *.lo)
- if test -n "$objs$old_deplibs"; then
- $echo "$modename: cannot build library object \`$output' from non-libtool objects" 1>&2
- exit $EXIT_FAILURE
- fi
- libobj="$output"
- obj=`$echo "X$output" | $Xsed -e "$lo2o"`
- ;;
- *)
- libobj=
- obj="$output"
- ;;
- esac
-
- # Delete the old objects.
- $run $rm $obj $libobj
-
- # Objects from convenience libraries. This assumes
- # single-version convenience libraries. Whenever we create
- # different ones for PIC/non-PIC, this we'll have to duplicate
- # the extraction.
- reload_conv_objs=
- gentop=
- # reload_cmds runs $LD directly, so let us get rid of
- # -Wl from whole_archive_flag_spec
- wl=
-
- if test -n "$convenience"; then
- if test -n "$whole_archive_flag_spec"; then
- eval reload_conv_objs=\"\$reload_objs $whole_archive_flag_spec\"
- else
- gentop="$output_objdir/${obj}x"
- generated="$generated $gentop"
-
- func_extract_archives $gentop $convenience
- reload_conv_objs="$reload_objs $func_extract_archives_result"
- fi
- fi
-
- # Create the old-style object.
- reload_objs="$objs$old_deplibs "`$echo "X$libobjs" | $SP2NL | $Xsed -e '/\.'${libext}$'/d' -e '/\.lib$/d' -e "$lo2o" | $NL2SP`" $reload_conv_objs" ### testsuite: skip nested quoting test
-
- output="$obj"
- cmds=$reload_cmds
- save_ifs="$IFS"; IFS='~'
- for cmd in $cmds; do
- IFS="$save_ifs"
- eval cmd=\"$cmd\"
- $show "$cmd"
- $run eval "$cmd" || exit $?
- done
- IFS="$save_ifs"
-
- # Exit if we aren't doing a library object file.
- if test -z "$libobj"; then
- if test -n "$gentop"; then
- $show "${rm}r $gentop"
- $run ${rm}r $gentop
- fi
-
- exit $EXIT_SUCCESS
- fi
-
- if test "$build_libtool_libs" != yes; then
- if test -n "$gentop"; then
- $show "${rm}r $gentop"
- $run ${rm}r $gentop
- fi
-
- # Create an invalid libtool object if no PIC, so that we don't
- # accidentally link it into a program.
- # $show "echo timestamp > $libobj"
- # $run eval "echo timestamp > $libobj" || exit $?
- exit $EXIT_SUCCESS
- fi
-
- if test -n "$pic_flag" || test "$pic_mode" != default; then
- # Only do commands if we really have different PIC objects.
- reload_objs="$libobjs $reload_conv_objs"
- output="$libobj"
- cmds=$reload_cmds
- save_ifs="$IFS"; IFS='~'
- for cmd in $cmds; do
- IFS="$save_ifs"
- eval cmd=\"$cmd\"
- $show "$cmd"
- $run eval "$cmd" || exit $?
- done
- IFS="$save_ifs"
- fi
-
- if test -n "$gentop"; then
- $show "${rm}r $gentop"
- $run ${rm}r $gentop
- fi
-
- exit $EXIT_SUCCESS
- ;;
-
- prog)
- case $host in
- *cygwin*) output=`$echo $output | ${SED} -e 's,.exe$,,;s,$,.exe,'` ;;
- esac
- if test -n "$vinfo"; then
- $echo "$modename: warning: \`-version-info' is ignored for programs" 1>&2
- fi
-
- if test -n "$release"; then
- $echo "$modename: warning: \`-release' is ignored for programs" 1>&2
- fi
-
- if test "$preload" = yes; then
- if test "$dlopen_support" = unknown && test "$dlopen_self" = unknown &&
- test "$dlopen_self_static" = unknown; then
- $echo "$modename: warning: \`AC_LIBTOOL_DLOPEN' not used. Assuming no dlopen support."
- fi
- fi
-
- case $host in
- *-*-rhapsody* | *-*-darwin1.[012])
- # On Rhapsody replace the C library is the System framework
- compile_deplibs=`$echo "X $compile_deplibs" | $Xsed -e 's/ -lc / -framework System /'`
- finalize_deplibs=`$echo "X $finalize_deplibs" | $Xsed -e 's/ -lc / -framework System /'`
- ;;
- esac
-
- case $host in
- *darwin*)
- # Don't allow lazy linking, it breaks C++ global constructors
- if test "$tagname" = CXX ; then
- compile_command="$compile_command ${wl}-bind_at_load"
- finalize_command="$finalize_command ${wl}-bind_at_load"
- fi
- ;;
- esac
-
-
- # move library search paths that coincide with paths to not yet
- # installed libraries to the beginning of the library search list
- new_libs=
- for path in $notinst_path; do
- case " $new_libs " in
- *" -L$path/$objdir "*) ;;
- *)
- case " $compile_deplibs " in
- *" -L$path/$objdir "*)
- new_libs="$new_libs -L$path/$objdir" ;;
- esac
- ;;
- esac
- done
- for deplib in $compile_deplibs; do
- case $deplib in
- -L*)
- case " $new_libs " in
- *" $deplib "*) ;;
- *) new_libs="$new_libs $deplib" ;;
- esac
- ;;
- *) new_libs="$new_libs $deplib" ;;
- esac
- done
- compile_deplibs="$new_libs"
-
-
- compile_command="$compile_command $compile_deplibs"
- finalize_command="$finalize_command $finalize_deplibs"
-
- if test -n "$rpath$xrpath"; then
- # If the user specified any rpath flags, then add them.
- for libdir in $rpath $xrpath; do
- # This is the magic to use -rpath.
- case "$finalize_rpath " in
- *" $libdir "*) ;;
- *) finalize_rpath="$finalize_rpath $libdir" ;;
- esac
- done
- fi
-
- # Now hardcode the library paths
- rpath=
- hardcode_libdirs=
- for libdir in $compile_rpath $finalize_rpath; do
- if test -n "$hardcode_libdir_flag_spec"; then
- if test -n "$hardcode_libdir_separator"; then
- if test -z "$hardcode_libdirs"; then
- hardcode_libdirs="$libdir"
- else
- # Just accumulate the unique libdirs.
- case $hardcode_libdir_separator$hardcode_libdirs$hardcode_libdir_separator in
- *"$hardcode_libdir_separator$libdir$hardcode_libdir_separator"*)
- ;;
- *)
- hardcode_libdirs="$hardcode_libdirs$hardcode_libdir_separator$libdir"
- ;;
- esac
- fi
- else
- eval flag=\"$hardcode_libdir_flag_spec\"
- rpath="$rpath $flag"
- fi
- elif test -n "$runpath_var"; then
- case "$perm_rpath " in
- *" $libdir "*) ;;
- *) perm_rpath="$perm_rpath $libdir" ;;
- esac
- fi
- case $host in
- *-*-cygwin* | *-*-mingw* | *-*-pw32* | *-*-os2*)
- testbindir=`$echo "X$libdir" | $Xsed -e 's*/lib$*/bin*'`
- case :$dllsearchpath: in
- *":$libdir:"*) ;;
- *) dllsearchpath="$dllsearchpath:$libdir";;
- esac
- case :$dllsearchpath: in
- *":$testbindir:"*) ;;
- *) dllsearchpath="$dllsearchpath:$testbindir";;
- esac
- ;;
- esac
- done
- # Substitute the hardcoded libdirs into the rpath.
- if test -n "$hardcode_libdir_separator" &&
- test -n "$hardcode_libdirs"; then
- libdir="$hardcode_libdirs"
- eval rpath=\" $hardcode_libdir_flag_spec\"
- fi
- compile_rpath="$rpath"
-
- rpath=
- hardcode_libdirs=
- for libdir in $finalize_rpath; do
- if test -n "$hardcode_libdir_flag_spec"; then
- if test -n "$hardcode_libdir_separator"; then
- if test -z "$hardcode_libdirs"; then
- hardcode_libdirs="$libdir"
- else
- # Just accumulate the unique libdirs.
- case $hardcode_libdir_separator$hardcode_libdirs$hardcode_libdir_separator in
- *"$hardcode_libdir_separator$libdir$hardcode_libdir_separator"*)
- ;;
- *)
- hardcode_libdirs="$hardcode_libdirs$hardcode_libdir_separator$libdir"
- ;;
- esac
- fi
- else
- eval flag=\"$hardcode_libdir_flag_spec\"
- rpath="$rpath $flag"
- fi
- elif test -n "$runpath_var"; then
- case "$finalize_perm_rpath " in
- *" $libdir "*) ;;
- *) finalize_perm_rpath="$finalize_perm_rpath $libdir" ;;
- esac
- fi
- done
- # Substitute the hardcoded libdirs into the rpath.
- if test -n "$hardcode_libdir_separator" &&
- test -n "$hardcode_libdirs"; then
- libdir="$hardcode_libdirs"
- eval rpath=\" $hardcode_libdir_flag_spec\"
- fi
- finalize_rpath="$rpath"
-
- if test -n "$libobjs" && test "$build_old_libs" = yes; then
- # Transform all the library objects into standard objects.
- compile_command=`$echo "X$compile_command" | $SP2NL | $Xsed -e "$lo2o" | $NL2SP`
- finalize_command=`$echo "X$finalize_command" | $SP2NL | $Xsed -e "$lo2o" | $NL2SP`
- fi
-
- dlsyms=
- if test -n "$dlfiles$dlprefiles" || test "$dlself" != no; then
- if test -n "$NM" && test -n "$global_symbol_pipe"; then
- dlsyms="${outputname}S.c"
- else
- $echo "$modename: not configured to extract global symbols from dlpreopened files" 1>&2
- fi
- fi
-
- if test -n "$dlsyms"; then
- case $dlsyms in
- "") ;;
- *.c)
- # Discover the nlist of each of the dlfiles.
- nlist="$output_objdir/${outputname}.nm"
-
- $show "$rm $nlist ${nlist}S ${nlist}T"
- $run $rm "$nlist" "${nlist}S" "${nlist}T"
-
- # Parse the name list into a source file.
- $show "creating $output_objdir/$dlsyms"
-
- test -z "$run" && $echo > "$output_objdir/$dlsyms" "\
-/* $dlsyms - symbol resolution table for \`$outputname' dlsym emulation. */
-/* Generated by $PROGRAM - GNU $PACKAGE $VERSION$TIMESTAMP */
-
-#ifdef __cplusplus
-extern \"C\" {
-#endif
-
-/* Prevent the only kind of declaration conflicts we can make. */
-#define lt_preloaded_symbols some_other_symbol
-
-/* External symbol declarations for the compiler. */\
-"
-
- if test "$dlself" = yes; then
- $show "generating symbol list for \`$output'"
-
- test -z "$run" && $echo ': @PROGRAM@ ' > "$nlist"
-
- # Add our own program objects to the symbol list.
- progfiles=`$echo "X$objs$old_deplibs" | $SP2NL | $Xsed -e "$lo2o" | $NL2SP`
- for arg in $progfiles; do
- $show "extracting global C symbols from \`$arg'"
- $run eval "$NM $arg | $global_symbol_pipe >> '$nlist'"
- done
-
- if test -n "$exclude_expsyms"; then
- $run eval '$EGREP -v " ($exclude_expsyms)$" "$nlist" > "$nlist"T'
- $run eval '$mv "$nlist"T "$nlist"'
- fi
-
- if test -n "$export_symbols_regex"; then
- $run eval '$EGREP -e "$export_symbols_regex" "$nlist" > "$nlist"T'
- $run eval '$mv "$nlist"T "$nlist"'
- fi
-
- # Prepare the list of exported symbols
- if test -z "$export_symbols"; then
- export_symbols="$output_objdir/$outputname.exp"
- $run $rm $export_symbols
- $run eval "${SED} -n -e '/^: @PROGRAM@ $/d' -e 's/^.* \(.*\)$/\1/p' "'< "$nlist" > "$export_symbols"'
- case $host in
- *cygwin* | *mingw* )
- $run eval "echo EXPORTS "'> "$output_objdir/$outputname.def"'
- $run eval 'cat "$export_symbols" >> "$output_objdir/$outputname.def"'
- ;;
- esac
- else
- $run eval "${SED} -e 's/\([].[*^$]\)/\\\\\1/g' -e 's/^/ /' -e 's/$/$/'"' < "$export_symbols" > "$output_objdir/$outputname.exp"'
- $run eval 'grep -f "$output_objdir/$outputname.exp" < "$nlist" > "$nlist"T'
- $run eval 'mv "$nlist"T "$nlist"'
- case $host in
- *cygwin* | *mingw* )
- $run eval "echo EXPORTS "'> "$output_objdir/$outputname.def"'
- $run eval 'cat "$nlist" >> "$output_objdir/$outputname.def"'
- ;;
- esac
- fi
- fi
-
- for arg in $dlprefiles; do
- $show "extracting global C symbols from \`$arg'"
- name=`$echo "$arg" | ${SED} -e 's%^.*/%%'`
- $run eval '$echo ": $name " >> "$nlist"'
- $run eval "$NM $arg | $global_symbol_pipe >> '$nlist'"
- done
-
- if test -z "$run"; then
- # Make sure we have at least an empty file.
- test -f "$nlist" || : > "$nlist"
-
- if test -n "$exclude_expsyms"; then
- $EGREP -v " ($exclude_expsyms)$" "$nlist" > "$nlist"T
- $mv "$nlist"T "$nlist"
- fi
-
- # Try sorting and uniquifying the output.
- if grep -v "^: " < "$nlist" |
- if sort -k 3 </dev/null >/dev/null 2>&1; then
- sort -k 3
- else
- sort +2
- fi |
- uniq > "$nlist"S; then
- :
- else
- grep -v "^: " < "$nlist" > "$nlist"S
- fi
-
- if test -f "$nlist"S; then
- eval "$global_symbol_to_cdecl"' < "$nlist"S >> "$output_objdir/$dlsyms"'
- else
- $echo '/* NONE */' >> "$output_objdir/$dlsyms"
- fi
-
- $echo >> "$output_objdir/$dlsyms" "\
-
-#undef lt_preloaded_symbols
-
-#if defined (__STDC__) && __STDC__
-# define lt_ptr void *
-#else
-# define lt_ptr char *
-# define const
-#endif
-
-/* The mapping between symbol names and symbols. */
-"
-
- case $host in
- *cygwin* | *mingw* )
- $echo >> "$output_objdir/$dlsyms" "\
-/* DATA imports from DLLs on WIN32 can't be const, because
- runtime relocations are performed -- see ld's documentation
- on pseudo-relocs */
-struct {
-"
- ;;
- * )
- $echo >> "$output_objdir/$dlsyms" "\
-const struct {
-"
- ;;
- esac
-
-
- $echo >> "$output_objdir/$dlsyms" "\
- const char *name;
- lt_ptr address;
-}
-lt_preloaded_symbols[] =
-{\
-"
-
- eval "$global_symbol_to_c_name_address" < "$nlist" >> "$output_objdir/$dlsyms"
-
- $echo >> "$output_objdir/$dlsyms" "\
- {0, (lt_ptr) 0}
-};
-
-/* This works around a problem in FreeBSD linker */
-#ifdef FREEBSD_WORKAROUND
-static const void *lt_preloaded_setup() {
- return lt_preloaded_symbols;
-}
-#endif
-
-#ifdef __cplusplus
-}
-#endif\
-"
- fi
-
- pic_flag_for_symtable=
- case $host in
- # compiling the symbol table file with pic_flag works around
- # a FreeBSD bug that causes programs to crash when -lm is
- # linked before any other PIC object. But we must not use
- # pic_flag when linking with -static. The problem exists in
- # FreeBSD 2.2.6 and is fixed in FreeBSD 3.1.
- *-*-freebsd2*|*-*-freebsd3.0*|*-*-freebsdelf3.0*)
- case "$compile_command " in
- *" -static "*) ;;
- *) pic_flag_for_symtable=" $pic_flag -DFREEBSD_WORKAROUND";;
- esac;;
- *-*-hpux*)
- case "$compile_command " in
- *" -static "*) ;;
- *) pic_flag_for_symtable=" $pic_flag";;
- esac
- esac
-
- # Now compile the dynamic symbol file.
- $show "(cd $output_objdir && $LTCC $LTCFLAGS -c$no_builtin_flag$pic_flag_for_symtable \"$dlsyms\")"
- $run eval '(cd $output_objdir && $LTCC $LTCFLAGS -c$no_builtin_flag$pic_flag_for_symtable "$dlsyms")' || exit $?
-
- # Clean up the generated files.
- $show "$rm $output_objdir/$dlsyms $nlist ${nlist}S ${nlist}T"
- $run $rm "$output_objdir/$dlsyms" "$nlist" "${nlist}S" "${nlist}T"
-
- # Transform the symbol file into the correct name.
- case $host in
- *cygwin* | *mingw* )
- if test -f "$output_objdir/${outputname}.def" ; then
- compile_command=`$echo "X$compile_command" | $Xsed -e "s%@SYMFILE@%$output_objdir/${outputname}.def $output_objdir/${outputname}S.${objext}%"`
- finalize_command=`$echo "X$finalize_command" | $Xsed -e "s%@SYMFILE@%$output_objdir/${outputname}.def $output_objdir/${outputname}S.${objext}%"`
- else
- compile_command=`$echo "X$compile_command" | $Xsed -e "s%@SYMFILE@%$output_objdir/${outputname}S.${objext}%"`
- finalize_command=`$echo "X$finalize_command" | $Xsed -e "s%@SYMFILE@%$output_objdir/${outputname}S.${objext}%"`
- fi
- ;;
- * )
- compile_command=`$echo "X$compile_command" | $Xsed -e "s%@SYMFILE@%$output_objdir/${outputname}S.${objext}%"`
- finalize_command=`$echo "X$finalize_command" | $Xsed -e "s%@SYMFILE@%$output_objdir/${outputname}S.${objext}%"`
- ;;
- esac
- ;;
- *)
- $echo "$modename: unknown suffix for \`$dlsyms'" 1>&2
- exit $EXIT_FAILURE
- ;;
- esac
- else
- # We keep going just in case the user didn't refer to
- # lt_preloaded_symbols. The linker will fail if global_symbol_pipe
- # really was required.
-
- # Nullify the symbol file.
- compile_command=`$echo "X$compile_command" | $Xsed -e "s% @SYMFILE@%%"`
- finalize_command=`$echo "X$finalize_command" | $Xsed -e "s% @SYMFILE@%%"`
- fi
-
- if test "$need_relink" = no || test "$build_libtool_libs" != yes; then
- # Replace the output file specification.
- compile_command=`$echo "X$compile_command" | $Xsed -e 's%@OUTPUT@%'"$output"'%g'`
- link_command="$compile_command$compile_rpath"
-
- # We have no uninstalled library dependencies, so finalize right now.
- $show "$link_command"
- $run eval "$link_command"
- exit_status=$?
-
- # Delete the generated files.
- if test -n "$dlsyms"; then
- $show "$rm $output_objdir/${outputname}S.${objext}"
- $run $rm "$output_objdir/${outputname}S.${objext}"
- fi
-
- exit $exit_status
- fi
-
- if test -n "$shlibpath_var"; then
- # We should set the shlibpath_var
- rpath=
- for dir in $temp_rpath; do
- case $dir in
- [\\/]* | [A-Za-z]:[\\/]*)
- # Absolute path.
- rpath="$rpath$dir:"
- ;;
- *)
- # Relative path: add a thisdir entry.
- rpath="$rpath\$thisdir/$dir:"
- ;;
- esac
- done
- temp_rpath="$rpath"
- fi
-
- if test -n "$compile_shlibpath$finalize_shlibpath"; then
- compile_command="$shlibpath_var=\"$compile_shlibpath$finalize_shlibpath\$$shlibpath_var\" $compile_command"
- fi
- if test -n "$finalize_shlibpath"; then
- finalize_command="$shlibpath_var=\"$finalize_shlibpath\$$shlibpath_var\" $finalize_command"
- fi
-
- compile_var=
- finalize_var=
- if test -n "$runpath_var"; then
- if test -n "$perm_rpath"; then
- # We should set the runpath_var.
- rpath=
- for dir in $perm_rpath; do
- rpath="$rpath$dir:"
- done
- compile_var="$runpath_var=\"$rpath\$$runpath_var\" "
- fi
- if test -n "$finalize_perm_rpath"; then
- # We should set the runpath_var.
- rpath=
- for dir in $finalize_perm_rpath; do
- rpath="$rpath$dir:"
- done
- finalize_var="$runpath_var=\"$rpath\$$runpath_var\" "
- fi
- fi
-
- if test "$no_install" = yes; then
- # We don't need to create a wrapper script.
- link_command="$compile_var$compile_command$compile_rpath"
- # Replace the output file specification.
- link_command=`$echo "X$link_command" | $Xsed -e 's%@OUTPUT@%'"$output"'%g'`
- # Delete the old output file.
- $run $rm $output
- # Link the executable and exit
- $show "$link_command"
- $run eval "$link_command" || exit $?
- exit $EXIT_SUCCESS
- fi
-
- if test "$hardcode_action" = relink; then
- # Fast installation is not supported
- link_command="$compile_var$compile_command$compile_rpath"
- relink_command="$finalize_var$finalize_command$finalize_rpath"
-
- $echo "$modename: warning: this platform does not like uninstalled shared libraries" 1>&2
- $echo "$modename: \`$output' will be relinked during installation" 1>&2
- else
- if test "$fast_install" != no; then
- link_command="$finalize_var$compile_command$finalize_rpath"
- if test "$fast_install" = yes; then
- relink_command=`$echo "X$compile_var$compile_command$compile_rpath" | $Xsed -e 's%@OUTPUT@%\$progdir/\$file%g'`
- else
- # fast_install is set to needless
- relink_command=
- fi
- else
- link_command="$compile_var$compile_command$compile_rpath"
- relink_command="$finalize_var$finalize_command$finalize_rpath"
- fi
- fi
-
- # Replace the output file specification.
- link_command=`$echo "X$link_command" | $Xsed -e 's%@OUTPUT@%'"$output_objdir/$outputname"'%g'`
-
- # Delete the old output files.
- $run $rm $output $output_objdir/$outputname $output_objdir/lt-$outputname
-
- $show "$link_command"
- $run eval "$link_command" || exit $?
-
- # Now create the wrapper script.
- $show "creating $output"
-
- # Quote the relink command for shipping.
- if test -n "$relink_command"; then
- # Preserve any variables that may affect compiler behavior
- for var in $variables_saved_for_relink; do
- if eval test -z \"\${$var+set}\"; then
- relink_command="{ test -z \"\${$var+set}\" || unset $var || { $var=; export $var; }; }; $relink_command"
- elif eval var_value=\$$var; test -z "$var_value"; then
- relink_command="$var=; export $var; $relink_command"
- else
- var_value=`$echo "X$var_value" | $Xsed -e "$sed_quote_subst"`
- relink_command="$var=\"$var_value\"; export $var; $relink_command"
- fi
- done
- relink_command="(cd `pwd`; $relink_command)"
- relink_command=`$echo "X$relink_command" | $Xsed -e "$sed_quote_subst"`
- fi
-
- # Quote $echo for shipping.
- if test "X$echo" = "X$SHELL $progpath --fallback-echo"; then
- case $progpath in
- [\\/]* | [A-Za-z]:[\\/]*) qecho="$SHELL $progpath --fallback-echo";;
- *) qecho="$SHELL `pwd`/$progpath --fallback-echo";;
- esac
- qecho=`$echo "X$qecho" | $Xsed -e "$sed_quote_subst"`
- else
- qecho=`$echo "X$echo" | $Xsed -e "$sed_quote_subst"`
- fi
-
- # Only actually do things if our run command is non-null.
- if test -z "$run"; then
- # win32 will think the script is a binary if it has
- # a .exe suffix, so we strip it off here.
- case $output in
- *.exe) output=`$echo $output|${SED} 's,.exe$,,'` ;;
- esac
- # test for cygwin because mv fails w/o .exe extensions
- case $host in
- *cygwin*)
- exeext=.exe
- outputname=`$echo $outputname|${SED} 's,.exe$,,'` ;;
- *) exeext= ;;
- esac
- case $host in
- *cygwin* | *mingw* )
- output_name=`basename $output`
- output_path=`dirname $output`
- cwrappersource="$output_path/$objdir/lt-$output_name.c"
- cwrapper="$output_path/$output_name.exe"
- $rm $cwrappersource $cwrapper
- trap "$rm $cwrappersource $cwrapper; exit $EXIT_FAILURE" 1 2 15
-
- cat > $cwrappersource <<EOF
-
-/* $cwrappersource - temporary wrapper executable for $objdir/$outputname
- Generated by $PROGRAM - GNU $PACKAGE $VERSION$TIMESTAMP
-
- The $output program cannot be directly executed until all the libtool
- libraries that it depends on are installed.
-
- This wrapper executable should never be moved out of the build directory.
- If it is, it will not operate correctly.
-
- Currently, it simply execs the wrapper *script* "/bin/sh $output",
- but could eventually absorb all of the scripts functionality and
- exec $objdir/$outputname directly.
-*/
-EOF
- cat >> $cwrappersource<<"EOF"
-#include <stdio.h>
-#include <stdlib.h>
-#include <unistd.h>
-#include <malloc.h>
-#include <stdarg.h>
-#include <assert.h>
-#include <string.h>
-#include <ctype.h>
-#include <sys/stat.h>
-
-#if defined(PATH_MAX)
-# define LT_PATHMAX PATH_MAX
-#elif defined(MAXPATHLEN)
-# define LT_PATHMAX MAXPATHLEN
-#else
-# define LT_PATHMAX 1024
-#endif
-
-#ifndef DIR_SEPARATOR
-# define DIR_SEPARATOR '/'
-# define PATH_SEPARATOR ':'
-#endif
-
-#if defined (_WIN32) || defined (__MSDOS__) || defined (__DJGPP__) || \
- defined (__OS2__)
-# define HAVE_DOS_BASED_FILE_SYSTEM
-# ifndef DIR_SEPARATOR_2
-# define DIR_SEPARATOR_2 '\\'
-# endif
-# ifndef PATH_SEPARATOR_2
-# define PATH_SEPARATOR_2 ';'
-# endif
-#endif
-
-#ifndef DIR_SEPARATOR_2
-# define IS_DIR_SEPARATOR(ch) ((ch) == DIR_SEPARATOR)
-#else /* DIR_SEPARATOR_2 */
-# define IS_DIR_SEPARATOR(ch) \
- (((ch) == DIR_SEPARATOR) || ((ch) == DIR_SEPARATOR_2))
-#endif /* DIR_SEPARATOR_2 */
-
-#ifndef PATH_SEPARATOR_2
-# define IS_PATH_SEPARATOR(ch) ((ch) == PATH_SEPARATOR)
-#else /* PATH_SEPARATOR_2 */
-# define IS_PATH_SEPARATOR(ch) ((ch) == PATH_SEPARATOR_2)
-#endif /* PATH_SEPARATOR_2 */
-
-#define XMALLOC(type, num) ((type *) xmalloc ((num) * sizeof(type)))
-#define XFREE(stale) do { \
- if (stale) { free ((void *) stale); stale = 0; } \
-} while (0)
-
-/* -DDEBUG is fairly common in CFLAGS. */
-#undef DEBUG
-#if defined DEBUGWRAPPER
-# define DEBUG(format, ...) fprintf(stderr, format, __VA_ARGS__)
-#else
-# define DEBUG(format, ...)
-#endif
-
-const char *program_name = NULL;
-
-void * xmalloc (size_t num);
-char * xstrdup (const char *string);
-const char * base_name (const char *name);
-char * find_executable(const char *wrapper);
-int check_executable(const char *path);
-char * strendzap(char *str, const char *pat);
-void lt_fatal (const char *message, ...);
-
-int
-main (int argc, char *argv[])
-{
- char **newargz;
- int i;
-
- program_name = (char *) xstrdup (base_name (argv[0]));
- DEBUG("(main) argv[0] : %s\n",argv[0]);
- DEBUG("(main) program_name : %s\n",program_name);
- newargz = XMALLOC(char *, argc+2);
-EOF
-
- cat >> $cwrappersource <<EOF
- newargz[0] = (char *) xstrdup("$SHELL");
-EOF
-
- cat >> $cwrappersource <<"EOF"
- newargz[1] = find_executable(argv[0]);
- if (newargz[1] == NULL)
- lt_fatal("Couldn't find %s", argv[0]);
- DEBUG("(main) found exe at : %s\n",newargz[1]);
- /* we know the script has the same name, without the .exe */
- /* so make sure newargz[1] doesn't end in .exe */
- strendzap(newargz[1],".exe");
- for (i = 1; i < argc; i++)
- newargz[i+1] = xstrdup(argv[i]);
- newargz[argc+1] = NULL;
-
- for (i=0; i<argc+1; i++)
- {
- DEBUG("(main) newargz[%d] : %s\n",i,newargz[i]);
- ;
- }
-
-EOF
-
- case $host_os in
- mingw*)
- cat >> $cwrappersource <<EOF
- execv("$SHELL",(char const **)newargz);
-EOF
- ;;
- *)
- cat >> $cwrappersource <<EOF
- execv("$SHELL",newargz);
-EOF
- ;;
- esac
-
- cat >> $cwrappersource <<"EOF"
- return 127;
-}
-
-void *
-xmalloc (size_t num)
-{
- void * p = (void *) malloc (num);
- if (!p)
- lt_fatal ("Memory exhausted");
-
- return p;
-}
-
-char *
-xstrdup (const char *string)
-{
- return string ? strcpy ((char *) xmalloc (strlen (string) + 1), string) : NULL
-;
-}
-
-const char *
-base_name (const char *name)
-{
- const char *base;
-
-#if defined (HAVE_DOS_BASED_FILE_SYSTEM)
- /* Skip over the disk name in MSDOS pathnames. */
- if (isalpha ((unsigned char)name[0]) && name[1] == ':')
- name += 2;
-#endif
-
- for (base = name; *name; name++)
- if (IS_DIR_SEPARATOR (*name))
- base = name + 1;
- return base;
-}
-
-int
-check_executable(const char * path)
-{
- struct stat st;
-
- DEBUG("(check_executable) : %s\n", path ? (*path ? path : "EMPTY!") : "NULL!");
- if ((!path) || (!*path))
- return 0;
-
- if ((stat (path, &st) >= 0) &&
- (
- /* MinGW & native WIN32 do not support S_IXOTH or S_IXGRP */
-#if defined (S_IXOTH)
- ((st.st_mode & S_IXOTH) == S_IXOTH) ||
-#endif
-#if defined (S_IXGRP)
- ((st.st_mode & S_IXGRP) == S_IXGRP) ||
-#endif
- ((st.st_mode & S_IXUSR) == S_IXUSR))
- )
- return 1;
- else
- return 0;
-}
-
-/* Searches for the full path of the wrapper. Returns
- newly allocated full path name if found, NULL otherwise */
-char *
-find_executable (const char* wrapper)
-{
- int has_slash = 0;
- const char* p;
- const char* p_next;
- /* static buffer for getcwd */
- char tmp[LT_PATHMAX + 1];
- int tmp_len;
- char* concat_name;
-
- DEBUG("(find_executable) : %s\n", wrapper ? (*wrapper ? wrapper : "EMPTY!") : "NULL!");
-
- if ((wrapper == NULL) || (*wrapper == '\0'))
- return NULL;
-
- /* Absolute path? */
-#if defined (HAVE_DOS_BASED_FILE_SYSTEM)
- if (isalpha ((unsigned char)wrapper[0]) && wrapper[1] == ':')
- {
- concat_name = xstrdup (wrapper);
- if (check_executable(concat_name))
- return concat_name;
- XFREE(concat_name);
- }
- else
- {
-#endif
- if (IS_DIR_SEPARATOR (wrapper[0]))
- {
- concat_name = xstrdup (wrapper);
- if (check_executable(concat_name))
- return concat_name;
- XFREE(concat_name);
- }
-#if defined (HAVE_DOS_BASED_FILE_SYSTEM)
- }
-#endif
-
- for (p = wrapper; *p; p++)
- if (*p == '/')
- {
- has_slash = 1;
- break;
- }
- if (!has_slash)
- {
- /* no slashes; search PATH */
- const char* path = getenv ("PATH");
- if (path != NULL)
- {
- for (p = path; *p; p = p_next)
- {
- const char* q;
- size_t p_len;
- for (q = p; *q; q++)
- if (IS_PATH_SEPARATOR(*q))
- break;
- p_len = q - p;
- p_next = (*q == '\0' ? q : q + 1);
- if (p_len == 0)
- {
- /* empty path: current directory */
- if (getcwd (tmp, LT_PATHMAX) == NULL)
- lt_fatal ("getcwd failed");
- tmp_len = strlen(tmp);
- concat_name = XMALLOC(char, tmp_len + 1 + strlen(wrapper) + 1);
- memcpy (concat_name, tmp, tmp_len);
- concat_name[tmp_len] = '/';
- strcpy (concat_name + tmp_len + 1, wrapper);
- }
- else
- {
- concat_name = XMALLOC(char, p_len + 1 + strlen(wrapper) + 1);
- memcpy (concat_name, p, p_len);
- concat_name[p_len] = '/';
- strcpy (concat_name + p_len + 1, wrapper);
- }
- if (check_executable(concat_name))
- return concat_name;
- XFREE(concat_name);
- }
- }
- /* not found in PATH; assume curdir */
- }
- /* Relative path | not found in path: prepend cwd */
- if (getcwd (tmp, LT_PATHMAX) == NULL)
- lt_fatal ("getcwd failed");
- tmp_len = strlen(tmp);
- concat_name = XMALLOC(char, tmp_len + 1 + strlen(wrapper) + 1);
- memcpy (concat_name, tmp, tmp_len);
- concat_name[tmp_len] = '/';
- strcpy (concat_name + tmp_len + 1, wrapper);
-
- if (check_executable(concat_name))
- return concat_name;
- XFREE(concat_name);
- return NULL;
-}
-
-char *
-strendzap(char *str, const char *pat)
-{
- size_t len, patlen;
-
- assert(str != NULL);
- assert(pat != NULL);
-
- len = strlen(str);
- patlen = strlen(pat);
-
- if (patlen <= len)
- {
- str += len - patlen;
- if (strcmp(str, pat) == 0)
- *str = '\0';
- }
- return str;
-}
-
-static void
-lt_error_core (int exit_status, const char * mode,
- const char * message, va_list ap)
-{
- fprintf (stderr, "%s: %s: ", program_name, mode);
- vfprintf (stderr, message, ap);
- fprintf (stderr, ".\n");
-
- if (exit_status >= 0)
- exit (exit_status);
-}
-
-void
-lt_fatal (const char *message, ...)
-{
- va_list ap;
- va_start (ap, message);
- lt_error_core (EXIT_FAILURE, "FATAL", message, ap);
- va_end (ap);
-}
-EOF
- # we should really use a build-platform specific compiler
- # here, but OTOH, the wrappers (shell script and this C one)
- # are only useful if you want to execute the "real" binary.
- # Since the "real" binary is built for $host, then this
- # wrapper might as well be built for $host, too.
- $run $LTCC $LTCFLAGS -s -o $cwrapper $cwrappersource
- ;;
- esac
- $rm $output
- trap "$rm $output; exit $EXIT_FAILURE" 1 2 15
-
- $echo > $output "\
-#! $SHELL
-
-# $output - temporary wrapper script for $objdir/$outputname
-# Generated by $PROGRAM - GNU $PACKAGE $VERSION$TIMESTAMP
-#
-# The $output program cannot be directly executed until all the libtool
-# libraries that it depends on are installed.
-#
-# This wrapper script should never be moved out of the build directory.
-# If it is, it will not operate correctly.
-
-# Sed substitution that helps us do robust quoting. It backslashifies
-# metacharacters that are still active within double-quoted strings.
-Xsed='${SED} -e 1s/^X//'
-sed_quote_subst='$sed_quote_subst'
-
-# The HP-UX ksh and POSIX shell print the target directory to stdout
-# if CDPATH is set.
-(unset CDPATH) >/dev/null 2>&1 && unset CDPATH
-
-relink_command=\"$relink_command\"
-
-# This environment variable determines our operation mode.
-if test \"\$libtool_install_magic\" = \"$magic\"; then
- # install mode needs the following variable:
- notinst_deplibs='$notinst_deplibs'
-else
- # When we are sourced in execute mode, \$file and \$echo are already set.
- if test \"\$libtool_execute_magic\" != \"$magic\"; then
- echo=\"$qecho\"
- file=\"\$0\"
- # Make sure echo works.
- if test \"X\$1\" = X--no-reexec; then
- # Discard the --no-reexec flag, and continue.
- shift
- elif test \"X\`(\$echo '\t') 2>/dev/null\`\" = 'X\t'; then
- # Yippee, \$echo works!
- :
- else
- # Restart under the correct shell, and then maybe \$echo will work.
- exec $SHELL \"\$0\" --no-reexec \${1+\"\$@\"}
- fi
- fi\
-"
- $echo >> $output "\
-
- # Find the directory that this script lives in.
- thisdir=\`\$echo \"X\$file\" | \$Xsed -e 's%/[^/]*$%%'\`
- test \"x\$thisdir\" = \"x\$file\" && thisdir=.
-
- # Follow symbolic links until we get to the real thisdir.
- file=\`ls -ld \"\$file\" | ${SED} -n 's/.*-> //p'\`
- while test -n \"\$file\"; do
- destdir=\`\$echo \"X\$file\" | \$Xsed -e 's%/[^/]*\$%%'\`
-
- # If there was a directory component, then change thisdir.
- if test \"x\$destdir\" != \"x\$file\"; then
- case \"\$destdir\" in
- [\\\\/]* | [A-Za-z]:[\\\\/]*) thisdir=\"\$destdir\" ;;
- *) thisdir=\"\$thisdir/\$destdir\" ;;
- esac
- fi
-
- file=\`\$echo \"X\$file\" | \$Xsed -e 's%^.*/%%'\`
- file=\`ls -ld \"\$thisdir/\$file\" | ${SED} -n 's/.*-> //p'\`
- done
-
- # Try to get the absolute directory name.
- absdir=\`cd \"\$thisdir\" && pwd\`
- test -n \"\$absdir\" && thisdir=\"\$absdir\"
-"
-
- if test "$fast_install" = yes; then
- $echo >> $output "\
- program=lt-'$outputname'$exeext
- progdir=\"\$thisdir/$objdir\"
-
- if test ! -f \"\$progdir/\$program\" || \\
- { file=\`ls -1dt \"\$progdir/\$program\" \"\$progdir/../\$program\" 2>/dev/null | ${SED} 1q\`; \\
- test \"X\$file\" != \"X\$progdir/\$program\"; }; then
-
- file=\"\$\$-\$program\"
-
- if test ! -d \"\$progdir\"; then
- $mkdir \"\$progdir\"
- else
- $rm \"\$progdir/\$file\"
- fi"
-
- $echo >> $output "\
-
- # relink executable if necessary
- if test -n \"\$relink_command\"; then
- if relink_command_output=\`eval \$relink_command 2>&1\`; then :
- else
- $echo \"\$relink_command_output\" >&2
- $rm \"\$progdir/\$file\"
- exit $EXIT_FAILURE
- fi
- fi
-
- $mv \"\$progdir/\$file\" \"\$progdir/\$program\" 2>/dev/null ||
- { $rm \"\$progdir/\$program\";
- $mv \"\$progdir/\$file\" \"\$progdir/\$program\"; }
- $rm \"\$progdir/\$file\"
- fi"
- else
- $echo >> $output "\
- program='$outputname'
- progdir=\"\$thisdir/$objdir\"
-"
- fi
-
- $echo >> $output "\
-
- if test -f \"\$progdir/\$program\"; then"
-
- # Export our shlibpath_var if we have one.
- if test "$shlibpath_overrides_runpath" = yes && test -n "$shlibpath_var" && test -n "$temp_rpath"; then
- $echo >> $output "\
- # Add our own library path to $shlibpath_var
- $shlibpath_var=\"$temp_rpath\$$shlibpath_var\"
-
- # Some systems cannot cope with colon-terminated $shlibpath_var
- # The second colon is a workaround for a bug in BeOS R4 sed
- $shlibpath_var=\`\$echo \"X\$$shlibpath_var\" | \$Xsed -e 's/::*\$//'\`
-
- export $shlibpath_var
-"
- fi
-
- # fixup the dll searchpath if we need to.
- if test -n "$dllsearchpath"; then
- $echo >> $output "\
- # Add the dll search path components to the executable PATH
- PATH=$dllsearchpath:\$PATH
-"
- fi
-
- $echo >> $output "\
- if test \"\$libtool_execute_magic\" != \"$magic\"; then
- # Run the actual program with our arguments.
-"
- case $host in
- # Backslashes separate directories on plain windows
- *-*-mingw | *-*-os2*)
- $echo >> $output "\
- exec \"\$progdir\\\\\$program\" \${1+\"\$@\"}
-"
- ;;
-
- *)
- $echo >> $output "\
- exec \"\$progdir/\$program\" \${1+\"\$@\"}
-"
- ;;
- esac
- $echo >> $output "\
- \$echo \"\$0: cannot exec \$program \${1+\"\$@\"}\"
- exit $EXIT_FAILURE
- fi
- else
- # The program doesn't exist.
- \$echo \"\$0: error: \\\`\$progdir/\$program' does not exist\" 1>&2
- \$echo \"This script is just a wrapper for \$program.\" 1>&2
- $echo \"See the $PACKAGE documentation for more information.\" 1>&2
- exit $EXIT_FAILURE
- fi
-fi\
-"
- chmod +x $output
- fi
- exit $EXIT_SUCCESS
- ;;
- esac
-
- # See if we need to build an old-fashioned archive.
- for oldlib in $oldlibs; do
-
- if test "$build_libtool_libs" = convenience; then
- oldobjs="$libobjs_save"
- addlibs="$convenience"
- build_libtool_libs=no
- else
- if test "$build_libtool_libs" = module; then
- oldobjs="$libobjs_save"
- build_libtool_libs=no
- else
- oldobjs="$old_deplibs $non_pic_objects"
- fi
- addlibs="$old_convenience"
- fi
-
- if test -n "$addlibs"; then
- gentop="$output_objdir/${outputname}x"
- generated="$generated $gentop"
-
- func_extract_archives $gentop $addlibs
- oldobjs="$oldobjs $func_extract_archives_result"
- fi
-
- # Do each command in the archive commands.
- if test -n "$old_archive_from_new_cmds" && test "$build_libtool_libs" = yes; then
- cmds=$old_archive_from_new_cmds
- else
- # POSIX demands no paths to be encoded in archives. We have
- # to avoid creating archives with duplicate basenames if we
- # might have to extract them afterwards, e.g., when creating a
- # static archive out of a convenience library, or when linking
- # the entirety of a libtool archive into another (currently
- # not supported by libtool).
- if (for obj in $oldobjs
- do
- $echo "X$obj" | $Xsed -e 's%^.*/%%'
- done | sort | sort -uc >/dev/null 2>&1); then
- :
- else
- $echo "copying selected object files to avoid basename conflicts..."
-
- if test -z "$gentop"; then
- gentop="$output_objdir/${outputname}x"
- generated="$generated $gentop"
-
- $show "${rm}r $gentop"
- $run ${rm}r "$gentop"
- $show "$mkdir $gentop"
- $run $mkdir "$gentop"
- exit_status=$?
- if test "$exit_status" -ne 0 && test ! -d "$gentop"; then
- exit $exit_status
- fi
- fi
-
- save_oldobjs=$oldobjs
- oldobjs=
- counter=1
- for obj in $save_oldobjs
- do
- objbase=`$echo "X$obj" | $Xsed -e 's%^.*/%%'`
- case " $oldobjs " in
- " ") oldobjs=$obj ;;
- *[\ /]"$objbase "*)
- while :; do
- # Make sure we don't pick an alternate name that also
- # overlaps.
- newobj=lt$counter-$objbase
- counter=`expr $counter + 1`
- case " $oldobjs " in
- *[\ /]"$newobj "*) ;;
- *) if test ! -f "$gentop/$newobj"; then break; fi ;;
- esac
- done
- $show "ln $obj $gentop/$newobj || cp $obj $gentop/$newobj"
- $run ln "$obj" "$gentop/$newobj" ||
- $run cp "$obj" "$gentop/$newobj"
- oldobjs="$oldobjs $gentop/$newobj"
- ;;
- *) oldobjs="$oldobjs $obj" ;;
- esac
- done
- fi
-
- eval cmds=\"$old_archive_cmds\"
-
- if len=`expr "X$cmds" : ".*"` &&
- test "$len" -le "$max_cmd_len" || test "$max_cmd_len" -le -1; then
- cmds=$old_archive_cmds
- else
- # the command line is too long to link in one step, link in parts
- $echo "using piecewise archive linking..."
- save_RANLIB=$RANLIB
- RANLIB=:
- objlist=
- concat_cmds=
- save_oldobjs=$oldobjs
-
- # Is there a better way of finding the last object in the list?
- for obj in $save_oldobjs
- do
- last_oldobj=$obj
- done
- for obj in $save_oldobjs
- do
- oldobjs="$objlist $obj"
- objlist="$objlist $obj"
- eval test_cmds=\"$old_archive_cmds\"
- if len=`expr "X$test_cmds" : ".*" 2>/dev/null` &&
- test "$len" -le "$max_cmd_len"; then
- :
- else
- # the above command should be used before it gets too long
- oldobjs=$objlist
- if test "$obj" = "$last_oldobj" ; then
- RANLIB=$save_RANLIB
- fi
- test -z "$concat_cmds" || concat_cmds=$concat_cmds~
- eval concat_cmds=\"\${concat_cmds}$old_archive_cmds\"
- objlist=
- fi
- done
- RANLIB=$save_RANLIB
- oldobjs=$objlist
- if test "X$oldobjs" = "X" ; then
- eval cmds=\"\$concat_cmds\"
- else
- eval cmds=\"\$concat_cmds~\$old_archive_cmds\"
- fi
- fi
- fi
- save_ifs="$IFS"; IFS='~'
- for cmd in $cmds; do
- eval cmd=\"$cmd\"
- IFS="$save_ifs"
- $show "$cmd"
- $run eval "$cmd" || exit $?
- done
- IFS="$save_ifs"
- done
-
- if test -n "$generated"; then
- $show "${rm}r$generated"
- $run ${rm}r$generated
- fi
-
- # Now create the libtool archive.
- case $output in
- *.la)
- old_library=
- test "$build_old_libs" = yes && old_library="$libname.$libext"
- $show "creating $output"
-
- # Preserve any variables that may affect compiler behavior
- for var in $variables_saved_for_relink; do
- if eval test -z \"\${$var+set}\"; then
- relink_command="{ test -z \"\${$var+set}\" || unset $var || { $var=; export $var; }; }; $relink_command"
- elif eval var_value=\$$var; test -z "$var_value"; then
- relink_command="$var=; export $var; $relink_command"
- else
- var_value=`$echo "X$var_value" | $Xsed -e "$sed_quote_subst"`
- relink_command="$var=\"$var_value\"; export $var; $relink_command"
- fi
- done
- # Quote the link command for shipping.
- relink_command="(cd `pwd`; $SHELL $progpath $preserve_args --mode=relink $libtool_args @inst_prefix_dir@)"
- relink_command=`$echo "X$relink_command" | $Xsed -e "$sed_quote_subst"`
- if test "$hardcode_automatic" = yes ; then
- relink_command=
- fi
-
-
- # Only create the output if not a dry run.
- if test -z "$run"; then
- for installed in no yes; do
- if test "$installed" = yes; then
- if test -z "$install_libdir"; then
- break
- fi
- output="$output_objdir/$outputname"i
- # Replace all uninstalled libtool libraries with the installed ones
- newdependency_libs=
- for deplib in $dependency_libs; do
- case $deplib in
- *.la)
- name=`$echo "X$deplib" | $Xsed -e 's%^.*/%%'`
- eval libdir=`${SED} -n -e 's/^libdir=\(.*\)$/\1/p' $deplib`
- if test -z "$libdir"; then
- $echo "$modename: \`$deplib' is not a valid libtool archive" 1>&2
- exit $EXIT_FAILURE
- fi
- newdependency_libs="$newdependency_libs $libdir/$name"
- ;;
- *) newdependency_libs="$newdependency_libs $deplib" ;;
- esac
- done
- dependency_libs="$newdependency_libs"
- newdlfiles=
- for lib in $dlfiles; do
- name=`$echo "X$lib" | $Xsed -e 's%^.*/%%'`
- eval libdir=`${SED} -n -e 's/^libdir=\(.*\)$/\1/p' $lib`
- if test -z "$libdir"; then
- $echo "$modename: \`$lib' is not a valid libtool archive" 1>&2
- exit $EXIT_FAILURE
- fi
- newdlfiles="$newdlfiles $libdir/$name"
- done
- dlfiles="$newdlfiles"
- newdlprefiles=
- for lib in $dlprefiles; do
- name=`$echo "X$lib" | $Xsed -e 's%^.*/%%'`
- eval libdir=`${SED} -n -e 's/^libdir=\(.*\)$/\1/p' $lib`
- if test -z "$libdir"; then
- $echo "$modename: \`$lib' is not a valid libtool archive" 1>&2
- exit $EXIT_FAILURE
- fi
- newdlprefiles="$newdlprefiles $libdir/$name"
- done
- dlprefiles="$newdlprefiles"
- else
- newdlfiles=
- for lib in $dlfiles; do
- case $lib in
- [\\/]* | [A-Za-z]:[\\/]*) abs="$lib" ;;
- *) abs=`pwd`"/$lib" ;;
- esac
- newdlfiles="$newdlfiles $abs"
- done
- dlfiles="$newdlfiles"
- newdlprefiles=
- for lib in $dlprefiles; do
- case $lib in
- [\\/]* | [A-Za-z]:[\\/]*) abs="$lib" ;;
- *) abs=`pwd`"/$lib" ;;
- esac
- newdlprefiles="$newdlprefiles $abs"
- done
- dlprefiles="$newdlprefiles"
- fi
- $rm $output
- # place dlname in correct position for cygwin
- tdlname=$dlname
- case $host,$output,$installed,$module,$dlname in
- *cygwin*,*lai,yes,no,*.dll | *mingw*,*lai,yes,no,*.dll) tdlname=../bin/$dlname ;;
- esac
- $echo > $output "\
-# $outputname - a libtool library file
-# Generated by $PROGRAM - GNU $PACKAGE $VERSION$TIMESTAMP
-#
-# Please DO NOT delete this file!
-# It is necessary for linking the library.
-
-# The name that we can dlopen(3).
-dlname='$tdlname'
-
-# Names of this library.
-library_names='$library_names'
-
-# The name of the static archive.
-old_library='$old_library'
-
-# Libraries that this one depends upon.
-dependency_libs='$dependency_libs'
-
-# Version information for $libname.
-current=$current
-age=$age
-revision=$revision
-
-# Is this an already installed library?
-installed=$installed
-
-# Should we warn about portability when linking against -modules?
-shouldnotlink=$module
-
-# Files to dlopen/dlpreopen
-dlopen='$dlfiles'
-dlpreopen='$dlprefiles'
-
-# Directory that this library needs to be installed in:
-libdir='$install_libdir'"
- if test "$installed" = no && test "$need_relink" = yes; then
- $echo >> $output "\
-relink_command=\"$relink_command\""
- fi
- done
- fi
-
- # Do a symbolic link so that the libtool archive can be found in
- # LD_LIBRARY_PATH before the program is installed.
- $show "(cd $output_objdir && $rm $outputname && $LN_S ../$outputname $outputname)"
- $run eval '(cd $output_objdir && $rm $outputname && $LN_S ../$outputname $outputname)' || exit $?
- ;;
- esac
- exit $EXIT_SUCCESS
- ;;
-
- # libtool install mode
- install)
- modename="$modename: install"
-
- # There may be an optional sh(1) argument at the beginning of
- # install_prog (especially on Windows NT).
- if test "$nonopt" = "$SHELL" || test "$nonopt" = /bin/sh ||
- # Allow the use of GNU shtool's install command.
- $echo "X$nonopt" | grep shtool > /dev/null; then
- # Aesthetically quote it.
- arg=`$echo "X$nonopt" | $Xsed -e "$sed_quote_subst"`
- case $arg in
- *[\[\~\#\^\&\*\(\)\{\}\|\;\<\>\?\'\ \ ]*|*]*|"")
- arg="\"$arg\""
- ;;
- esac
- install_prog="$arg "
- arg="$1"
- shift
- else
- install_prog=
- arg=$nonopt
- fi
-
- # The real first argument should be the name of the installation program.
- # Aesthetically quote it.
- arg=`$echo "X$arg" | $Xsed -e "$sed_quote_subst"`
- case $arg in
- *[\[\~\#\^\&\*\(\)\{\}\|\;\<\>\?\'\ \ ]*|*]*|"")
- arg="\"$arg\""
- ;;
- esac
- install_prog="$install_prog$arg"
-
- # We need to accept at least all the BSD install flags.
- dest=
- files=
- opts=
- prev=
- install_type=
- isdir=no
- stripme=
- for arg
- do
- if test -n "$dest"; then
- files="$files $dest"
- dest=$arg
- continue
- fi
-
- case $arg in
- -d) isdir=yes ;;
- -f)
- case " $install_prog " in
- *[\\\ /]cp\ *) ;;
- *) prev=$arg ;;
- esac
- ;;
- -g | -m | -o) prev=$arg ;;
- -s)
- stripme=" -s"
- continue
- ;;
- -*)
- ;;
- *)
- # If the previous option needed an argument, then skip it.
- if test -n "$prev"; then
- prev=
- else
- dest=$arg
- continue
- fi
- ;;
- esac
-
- # Aesthetically quote the argument.
- arg=`$echo "X$arg" | $Xsed -e "$sed_quote_subst"`
- case $arg in
- *[\[\~\#\^\&\*\(\)\{\}\|\;\<\>\?\'\ \ ]*|*]*|"")
- arg="\"$arg\""
- ;;
- esac
- install_prog="$install_prog $arg"
- done
-
- if test -z "$install_prog"; then
- $echo "$modename: you must specify an install program" 1>&2
- $echo "$help" 1>&2
- exit $EXIT_FAILURE
- fi
-
- if test -n "$prev"; then
- $echo "$modename: the \`$prev' option requires an argument" 1>&2
- $echo "$help" 1>&2
- exit $EXIT_FAILURE
- fi
-
- if test -z "$files"; then
- if test -z "$dest"; then
- $echo "$modename: no file or destination specified" 1>&2
- else
- $echo "$modename: you must specify a destination" 1>&2
- fi
- $echo "$help" 1>&2
- exit $EXIT_FAILURE
- fi
-
- # Strip any trailing slash from the destination.
- dest=`$echo "X$dest" | $Xsed -e 's%/$%%'`
-
- # Check to see that the destination is a directory.
- test -d "$dest" && isdir=yes
- if test "$isdir" = yes; then
- destdir="$dest"
- destname=
- else
- destdir=`$echo "X$dest" | $Xsed -e 's%/[^/]*$%%'`
- test "X$destdir" = "X$dest" && destdir=.
- destname=`$echo "X$dest" | $Xsed -e 's%^.*/%%'`
-
- # Not a directory, so check to see that there is only one file specified.
- set dummy $files
- if test "$#" -gt 2; then
- $echo "$modename: \`$dest' is not a directory" 1>&2
- $echo "$help" 1>&2
- exit $EXIT_FAILURE
- fi
- fi
- case $destdir in
- [\\/]* | [A-Za-z]:[\\/]*) ;;
- *)
- for file in $files; do
- case $file in
- *.lo) ;;
- *)
- $echo "$modename: \`$destdir' must be an absolute directory name" 1>&2
- $echo "$help" 1>&2
- exit $EXIT_FAILURE
- ;;
- esac
- done
- ;;
- esac
-
- # This variable tells wrapper scripts just to set variables rather
- # than running their programs.
- libtool_install_magic="$magic"
-
- staticlibs=
- future_libdirs=
- current_libdirs=
- for file in $files; do
-
- # Do each installation.
- case $file in
- *.$libext)
- # Do the static libraries later.
- staticlibs="$staticlibs $file"
- ;;
-
- *.la)
- # Check to see that this really is a libtool archive.
- if (${SED} -e '2q' $file | grep "^# Generated by .*$PACKAGE") >/dev/null 2>&1; then :
- else
- $echo "$modename: \`$file' is not a valid libtool archive" 1>&2
- $echo "$help" 1>&2
- exit $EXIT_FAILURE
- fi
-
- library_names=
- old_library=
- relink_command=
- # If there is no directory component, then add one.
- case $file in
- */* | *\\*) . $file ;;
- *) . ./$file ;;
- esac
-
- # Add the libdir to current_libdirs if it is the destination.
- if test "X$destdir" = "X$libdir"; then
- case "$current_libdirs " in
- *" $libdir "*) ;;
- *) current_libdirs="$current_libdirs $libdir" ;;
- esac
- else
- # Note the libdir as a future libdir.
- case "$future_libdirs " in
- *" $libdir "*) ;;
- *) future_libdirs="$future_libdirs $libdir" ;;
- esac
- fi
-
- dir=`$echo "X$file" | $Xsed -e 's%/[^/]*$%%'`/
- test "X$dir" = "X$file/" && dir=
- dir="$dir$objdir"
-
- if test -n "$relink_command"; then
- # Determine the prefix the user has applied to our future dir.
- inst_prefix_dir=`$echo "$destdir" | $SED "s%$libdir\$%%"`
-
- # Don't allow the user to place us outside of our expected
- # location b/c this prevents finding dependent libraries that
- # are installed to the same prefix.
- # At present, this check doesn't affect windows .dll's that
- # are installed into $libdir/../bin (currently, that works fine)
- # but it's something to keep an eye on.
- if test "$inst_prefix_dir" = "$destdir"; then
- $echo "$modename: error: cannot install \`$file' to a directory not ending in $libdir" 1>&2
- exit $EXIT_FAILURE
- fi
-
- if test -n "$inst_prefix_dir"; then
- # Stick the inst_prefix_dir data into the link command.
- relink_command=`$echo "$relink_command" | $SED "s%@inst_prefix_dir@%-inst-prefix-dir $inst_prefix_dir%"`
- else
- relink_command=`$echo "$relink_command" | $SED "s%@inst_prefix_dir@%%"`
- fi
-
- $echo "$modename: warning: relinking \`$file'" 1>&2
- $show "$relink_command"
- if $run eval "$relink_command"; then :
- else
- $echo "$modename: error: relink \`$file' with the above command before installing it" 1>&2
- exit $EXIT_FAILURE
- fi
- fi
-
- # See the names of the shared library.
- set dummy $library_names
- if test -n "$2"; then
- realname="$2"
- shift
- shift
-
- srcname="$realname"
- test -n "$relink_command" && srcname="$realname"T
-
- # Install the shared library and build the symlinks.
- $show "$install_prog $dir/$srcname $destdir/$realname"
- $run eval "$install_prog $dir/$srcname $destdir/$realname" || exit $?
- if test -n "$stripme" && test -n "$striplib"; then
- $show "$striplib $destdir/$realname"
- $run eval "$striplib $destdir/$realname" || exit $?
- fi
-
- if test "$#" -gt 0; then
- # Delete the old symlinks, and create new ones.
- # Try `ln -sf' first, because the `ln' binary might depend on
- # the symlink we replace! Solaris /bin/ln does not understand -f,
- # so we also need to try rm && ln -s.
- for linkname
- do
- if test "$linkname" != "$realname"; then
- $show "(cd $destdir && { $LN_S -f $realname $linkname || { $rm $linkname && $LN_S $realname $linkname; }; })"
- $run eval "(cd $destdir && { $LN_S -f $realname $linkname || { $rm $linkname && $LN_S $realname $linkname; }; })"
- fi
- done
- fi
-
- # Do each command in the postinstall commands.
- lib="$destdir/$realname"
- cmds=$postinstall_cmds
- save_ifs="$IFS"; IFS='~'
- for cmd in $cmds; do
- IFS="$save_ifs"
- eval cmd=\"$cmd\"
- $show "$cmd"
- $run eval "$cmd" || {
- lt_exit=$?
-
- # Restore the uninstalled library and exit
- if test "$mode" = relink; then
- $run eval '(cd $output_objdir && $rm ${realname}T && $mv ${realname}U $realname)'
- fi
-
- exit $lt_exit
- }
- done
- IFS="$save_ifs"
- fi
-
- # Install the pseudo-library for information purposes.
- name=`$echo "X$file" | $Xsed -e 's%^.*/%%'`
- instname="$dir/$name"i
- $show "$install_prog $instname $destdir/$name"
- $run eval "$install_prog $instname $destdir/$name" || exit $?
-
- # Maybe install the static library, too.
- test -n "$old_library" && staticlibs="$staticlibs $dir/$old_library"
- ;;
-
- *.lo)
- # Install (i.e. copy) a libtool object.
-
- # Figure out destination file name, if it wasn't already specified.
- if test -n "$destname"; then
- destfile="$destdir/$destname"
- else
- destfile=`$echo "X$file" | $Xsed -e 's%^.*/%%'`
- destfile="$destdir/$destfile"
- fi
-
- # Deduce the name of the destination old-style object file.
- case $destfile in
- *.lo)
- staticdest=`$echo "X$destfile" | $Xsed -e "$lo2o"`
- ;;
- *.$objext)
- staticdest="$destfile"
- destfile=
- ;;
- *)
- $echo "$modename: cannot copy a libtool object to \`$destfile'" 1>&2
- $echo "$help" 1>&2
- exit $EXIT_FAILURE
- ;;
- esac
-
- # Install the libtool object if requested.
- if test -n "$destfile"; then
- $show "$install_prog $file $destfile"
- $run eval "$install_prog $file $destfile" || exit $?
- fi
-
- # Install the old object if enabled.
- if test "$build_old_libs" = yes; then
- # Deduce the name of the old-style object file.
- staticobj=`$echo "X$file" | $Xsed -e "$lo2o"`
-
- $show "$install_prog $staticobj $staticdest"
- $run eval "$install_prog \$staticobj \$staticdest" || exit $?
- fi
- exit $EXIT_SUCCESS
- ;;
-
- *)
- # Figure out destination file name, if it wasn't already specified.
- if test -n "$destname"; then
- destfile="$destdir/$destname"
- else
- destfile=`$echo "X$file" | $Xsed -e 's%^.*/%%'`
- destfile="$destdir/$destfile"
- fi
-
- # If the file is missing, and there is a .exe on the end, strip it
- # because it is most likely a libtool script we actually want to
- # install
- stripped_ext=""
- case $file in
- *.exe)
- if test ! -f "$file"; then
- file=`$echo $file|${SED} 's,.exe$,,'`
- stripped_ext=".exe"
- fi
- ;;
- esac
-
- # Do a test to see if this is really a libtool program.
- case $host in
- *cygwin*|*mingw*)
- wrapper=`$echo $file | ${SED} -e 's,.exe$,,'`
- ;;
- *)
- wrapper=$file
- ;;
- esac
- if (${SED} -e '4q' $wrapper | grep "^# Generated by .*$PACKAGE")>/dev/null 2>&1; then
- notinst_deplibs=
- relink_command=
-
- # Note that it is not necessary on cygwin/mingw to append a dot to
- # foo even if both foo and FILE.exe exist: automatic-append-.exe
- # behavior happens only for exec(3), not for open(2)! Also, sourcing
- # `FILE.' does not work on cygwin managed mounts.
- #
- # If there is no directory component, then add one.
- case $wrapper in
- */* | *\\*) . ${wrapper} ;;
- *) . ./${wrapper} ;;
- esac
-
- # Check the variables that should have been set.
- if test -z "$notinst_deplibs"; then
- $echo "$modename: invalid libtool wrapper script \`$wrapper'" 1>&2
- exit $EXIT_FAILURE
- fi
-
- finalize=yes
- for lib in $notinst_deplibs; do
- # Check to see that each library is installed.
- libdir=
- if test -f "$lib"; then
- # If there is no directory component, then add one.
- case $lib in
- */* | *\\*) . $lib ;;
- *) . ./$lib ;;
- esac
- fi
- libfile="$libdir/"`$echo "X$lib" | $Xsed -e 's%^.*/%%g'` ### testsuite: skip nested quoting test
- if test -n "$libdir" && test ! -f "$libfile"; then
- $echo "$modename: warning: \`$lib' has not been installed in \`$libdir'" 1>&2
- finalize=no
- fi
- done
-
- relink_command=
- # Note that it is not necessary on cygwin/mingw to append a dot to
- # foo even if both foo and FILE.exe exist: automatic-append-.exe
- # behavior happens only for exec(3), not for open(2)! Also, sourcing
- # `FILE.' does not work on cygwin managed mounts.
- #
- # If there is no directory component, then add one.
- case $wrapper in
- */* | *\\*) . ${wrapper} ;;
- *) . ./${wrapper} ;;
- esac
-
- outputname=
- if test "$fast_install" = no && test -n "$relink_command"; then
- if test "$finalize" = yes && test -z "$run"; then
- tmpdir=`func_mktempdir`
- file=`$echo "X$file$stripped_ext" | $Xsed -e 's%^.*/%%'`
- outputname="$tmpdir/$file"
- # Replace the output file specification.
- relink_command=`$echo "X$relink_command" | $Xsed -e 's%@OUTPUT@%'"$outputname"'%g'`
-
- $show "$relink_command"
- if $run eval "$relink_command"; then :
- else
- $echo "$modename: error: relink \`$file' with the above command before installing it" 1>&2
- ${rm}r "$tmpdir"
- continue
- fi
- file="$outputname"
- else
- $echo "$modename: warning: cannot relink \`$file'" 1>&2
- fi
- else
- # Install the binary that we compiled earlier.
- file=`$echo "X$file$stripped_ext" | $Xsed -e "s%\([^/]*\)$%$objdir/\1%"`
- fi
- fi
-
- # remove .exe since cygwin /usr/bin/install will append another
- # one anyway
- case $install_prog,$host in
- */usr/bin/install*,*cygwin*)
- case $file:$destfile in
- *.exe:*.exe)
- # this is ok
- ;;
- *.exe:*)
- destfile=$destfile.exe
- ;;
- *:*.exe)
- destfile=`$echo $destfile | ${SED} -e 's,.exe$,,'`
- ;;
- esac
- ;;
- esac
- $show "$install_prog$stripme $file $destfile"
- $run eval "$install_prog\$stripme \$file \$destfile" || exit $?
- test -n "$outputname" && ${rm}r "$tmpdir"
- ;;
- esac
- done
-
- for file in $staticlibs; do
- name=`$echo "X$file" | $Xsed -e 's%^.*/%%'`
-
- # Set up the ranlib parameters.
- oldlib="$destdir/$name"
-
- $show "$install_prog $file $oldlib"
- $run eval "$install_prog \$file \$oldlib" || exit $?
-
- if test -n "$stripme" && test -n "$old_striplib"; then
- $show "$old_striplib $oldlib"
- $run eval "$old_striplib $oldlib" || exit $?
- fi
-
- # Do each command in the postinstall commands.
- cmds=$old_postinstall_cmds
- save_ifs="$IFS"; IFS='~'
- for cmd in $cmds; do
- IFS="$save_ifs"
- eval cmd=\"$cmd\"
- $show "$cmd"
- $run eval "$cmd" || exit $?
- done
- IFS="$save_ifs"
- done
-
- if test -n "$future_libdirs"; then
- $echo "$modename: warning: remember to run \`$progname --finish$future_libdirs'" 1>&2
- fi
-
- if test -n "$current_libdirs"; then
- # Maybe just do a dry run.
- test -n "$run" && current_libdirs=" -n$current_libdirs"
- exec_cmd='$SHELL $progpath $preserve_args --finish$current_libdirs'
- else
- exit $EXIT_SUCCESS
- fi
- ;;
-
- # libtool finish mode
- finish)
- modename="$modename: finish"
- libdirs="$nonopt"
- admincmds=
-
- if test -n "$finish_cmds$finish_eval" && test -n "$libdirs"; then
- for dir
- do
- libdirs="$libdirs $dir"
- done
-
- for libdir in $libdirs; do
- if test -n "$finish_cmds"; then
- # Do each command in the finish commands.
- cmds=$finish_cmds
- save_ifs="$IFS"; IFS='~'
- for cmd in $cmds; do
- IFS="$save_ifs"
- eval cmd=\"$cmd\"
- $show "$cmd"
- $run eval "$cmd" || admincmds="$admincmds
- $cmd"
- done
- IFS="$save_ifs"
- fi
- if test -n "$finish_eval"; then
- # Do the single finish_eval.
- eval cmds=\"$finish_eval\"
- $run eval "$cmds" || admincmds="$admincmds
- $cmds"
- fi
- done
- fi
-
- # Exit here if they wanted silent mode.
- test "$show" = : && exit $EXIT_SUCCESS
-
- $echo "X----------------------------------------------------------------------" | $Xsed
- $echo "Libraries have been installed in:"
- for libdir in $libdirs; do
- $echo " $libdir"
- done
- $echo
- $echo "If you ever happen to want to link against installed libraries"
- $echo "in a given directory, LIBDIR, you must either use libtool, and"
- $echo "specify the full pathname of the library, or use the \`-LLIBDIR'"
- $echo "flag during linking and do at least one of the following:"
- if test -n "$shlibpath_var"; then
- $echo " - add LIBDIR to the \`$shlibpath_var' environment variable"
- $echo " during execution"
- fi
- if test -n "$runpath_var"; then
- $echo " - add LIBDIR to the \`$runpath_var' environment variable"
- $echo " during linking"
- fi
- if test -n "$hardcode_libdir_flag_spec"; then
- libdir=LIBDIR
- eval flag=\"$hardcode_libdir_flag_spec\"
-
- $echo " - use the \`$flag' linker flag"
- fi
- if test -n "$admincmds"; then
- $echo " - have your system administrator run these commands:$admincmds"
- fi
- if test -f /etc/ld.so.conf; then
- $echo " - have your system administrator add LIBDIR to \`/etc/ld.so.conf'"
- fi
- $echo
- $echo "See any operating system documentation about shared libraries for"
- $echo "more information, such as the ld(1) and ld.so(8) manual pages."
- $echo "X----------------------------------------------------------------------" | $Xsed
- exit $EXIT_SUCCESS
- ;;
-
- # libtool execute mode
- execute)
- modename="$modename: execute"
-
- # The first argument is the command name.
- cmd="$nonopt"
- if test -z "$cmd"; then
- $echo "$modename: you must specify a COMMAND" 1>&2
- $echo "$help"
- exit $EXIT_FAILURE
- fi
-
- # Handle -dlopen flags immediately.
- for file in $execute_dlfiles; do
- if test ! -f "$file"; then
- $echo "$modename: \`$file' is not a file" 1>&2
- $echo "$help" 1>&2
- exit $EXIT_FAILURE
- fi
-
- dir=
- case $file in
- *.la)
- # Check to see that this really is a libtool archive.
- if (${SED} -e '2q' $file | grep "^# Generated by .*$PACKAGE") >/dev/null 2>&1; then :
- else
- $echo "$modename: \`$lib' is not a valid libtool archive" 1>&2
- $echo "$help" 1>&2
- exit $EXIT_FAILURE
- fi
-
- # Read the libtool library.
- dlname=
- library_names=
-
- # If there is no directory component, then add one.
- case $file in
- */* | *\\*) . $file ;;
- *) . ./$file ;;
- esac
-
- # Skip this library if it cannot be dlopened.
- if test -z "$dlname"; then
- # Warn if it was a shared library.
- test -n "$library_names" && $echo "$modename: warning: \`$file' was not linked with \`-export-dynamic'"
- continue
- fi
-
- dir=`$echo "X$file" | $Xsed -e 's%/[^/]*$%%'`
- test "X$dir" = "X$file" && dir=.
-
- if test -f "$dir/$objdir/$dlname"; then
- dir="$dir/$objdir"
- else
- $echo "$modename: cannot find \`$dlname' in \`$dir' or \`$dir/$objdir'" 1>&2
- exit $EXIT_FAILURE
- fi
- ;;
-
- *.lo)
- # Just add the directory containing the .lo file.
- dir=`$echo "X$file" | $Xsed -e 's%/[^/]*$%%'`
- test "X$dir" = "X$file" && dir=.
- ;;
-
- *)
- $echo "$modename: warning \`-dlopen' is ignored for non-libtool libraries and objects" 1>&2
- continue
- ;;
- esac
-
- # Get the absolute pathname.
- absdir=`cd "$dir" && pwd`
- test -n "$absdir" && dir="$absdir"
-
- # Now add the directory to shlibpath_var.
- if eval "test -z \"\$$shlibpath_var\""; then
- eval "$shlibpath_var=\"\$dir\""
- else
- eval "$shlibpath_var=\"\$dir:\$$shlibpath_var\""
- fi
- done
-
- # This variable tells wrapper scripts just to set shlibpath_var
- # rather than running their programs.
- libtool_execute_magic="$magic"
-
- # Check if any of the arguments is a wrapper script.
- args=
- for file
- do
- case $file in
- -*) ;;
- *)
- # Do a test to see if this is really a libtool program.
- if (${SED} -e '4q' $file | grep "^# Generated by .*$PACKAGE") >/dev/null 2>&1; then
- # If there is no directory component, then add one.
- case $file in
- */* | *\\*) . $file ;;
- *) . ./$file ;;
- esac
-
- # Transform arg to wrapped name.
- file="$progdir/$program"
- fi
- ;;
- esac
- # Quote arguments (to preserve shell metacharacters).
- file=`$echo "X$file" | $Xsed -e "$sed_quote_subst"`
- args="$args \"$file\""
- done
-
- if test -z "$run"; then
- if test -n "$shlibpath_var"; then
- # Export the shlibpath_var.
- eval "export $shlibpath_var"
- fi
-
- # Restore saved environment variables
- if test "${save_LC_ALL+set}" = set; then
- LC_ALL="$save_LC_ALL"; export LC_ALL
- fi
- if test "${save_LANG+set}" = set; then
- LANG="$save_LANG"; export LANG
- fi
-
- # Now prepare to actually exec the command.
- exec_cmd="\$cmd$args"
- else
- # Display what would be done.
- if test -n "$shlibpath_var"; then
- eval "\$echo \"\$shlibpath_var=\$$shlibpath_var\""
- $echo "export $shlibpath_var"
- fi
- $echo "$cmd$args"
- exit $EXIT_SUCCESS
- fi
- ;;
-
- # libtool clean and uninstall mode
- clean | uninstall)
- modename="$modename: $mode"
- rm="$nonopt"
- files=
- rmforce=
- exit_status=0
-
- # This variable tells wrapper scripts just to set variables rather
- # than running their programs.
- libtool_install_magic="$magic"
-
- for arg
- do
- case $arg in
- -f) rm="$rm $arg"; rmforce=yes ;;
- -*) rm="$rm $arg" ;;
- *) files="$files $arg" ;;
- esac
- done
-
- if test -z "$rm"; then
- $echo "$modename: you must specify an RM program" 1>&2
- $echo "$help" 1>&2
- exit $EXIT_FAILURE
- fi
-
- rmdirs=
-
- origobjdir="$objdir"
- for file in $files; do
- dir=`$echo "X$file" | $Xsed -e 's%/[^/]*$%%'`
- if test "X$dir" = "X$file"; then
- dir=.
- objdir="$origobjdir"
- else
- objdir="$dir/$origobjdir"
- fi
- name=`$echo "X$file" | $Xsed -e 's%^.*/%%'`
- test "$mode" = uninstall && objdir="$dir"
-
- # Remember objdir for removal later, being careful to avoid duplicates
- if test "$mode" = clean; then
- case " $rmdirs " in
- *" $objdir "*) ;;
- *) rmdirs="$rmdirs $objdir" ;;
- esac
- fi
-
- # Don't error if the file doesn't exist and rm -f was used.
- if (test -L "$file") >/dev/null 2>&1 \
- || (test -h "$file") >/dev/null 2>&1 \
- || test -f "$file"; then
- :
- elif test -d "$file"; then
- exit_status=1
- continue
- elif test "$rmforce" = yes; then
- continue
- fi
-
- rmfiles="$file"
-
- case $name in
- *.la)
- # Possibly a libtool archive, so verify it.
- if (${SED} -e '2q' $file | grep "^# Generated by .*$PACKAGE") >/dev/null 2>&1; then
- . $dir/$name
-
- # Delete the libtool libraries and symlinks.
- for n in $library_names; do
- rmfiles="$rmfiles $objdir/$n"
- done
- test -n "$old_library" && rmfiles="$rmfiles $objdir/$old_library"
-
- case "$mode" in
- clean)
- case " $library_names " in
- # " " in the beginning catches empty $dlname
- *" $dlname "*) ;;
- *) rmfiles="$rmfiles $objdir/$dlname" ;;
- esac
- test -n "$libdir" && rmfiles="$rmfiles $objdir/$name $objdir/${name}i"
- ;;
- uninstall)
- if test -n "$library_names"; then
- # Do each command in the postuninstall commands.
- cmds=$postuninstall_cmds
- save_ifs="$IFS"; IFS='~'
- for cmd in $cmds; do
- IFS="$save_ifs"
- eval cmd=\"$cmd\"
- $show "$cmd"
- $run eval "$cmd"
- if test "$?" -ne 0 && test "$rmforce" != yes; then
- exit_status=1
- fi
- done
- IFS="$save_ifs"
- fi
-
- if test -n "$old_library"; then
- # Do each command in the old_postuninstall commands.
- cmds=$old_postuninstall_cmds
- save_ifs="$IFS"; IFS='~'
- for cmd in $cmds; do
- IFS="$save_ifs"
- eval cmd=\"$cmd\"
- $show "$cmd"
- $run eval "$cmd"
- if test "$?" -ne 0 && test "$rmforce" != yes; then
- exit_status=1
- fi
- done
- IFS="$save_ifs"
- fi
- # FIXME: should reinstall the best remaining shared library.
- ;;
- esac
- fi
- ;;
-
- *.lo)
- # Possibly a libtool object, so verify it.
- if (${SED} -e '2q' $file | grep "^# Generated by .*$PACKAGE") >/dev/null 2>&1; then
-
- # Read the .lo file
- . $dir/$name
-
- # Add PIC object to the list of files to remove.
- if test -n "$pic_object" \
- && test "$pic_object" != none; then
- rmfiles="$rmfiles $dir/$pic_object"
- fi
-
- # Add non-PIC object to the list of files to remove.
- if test -n "$non_pic_object" \
- && test "$non_pic_object" != none; then
- rmfiles="$rmfiles $dir/$non_pic_object"
- fi
- fi
- ;;
-
- *)
- if test "$mode" = clean ; then
- noexename=$name
- case $file in
- *.exe)
- file=`$echo $file|${SED} 's,.exe$,,'`
- noexename=`$echo $name|${SED} 's,.exe$,,'`
- # $file with .exe has already been added to rmfiles,
- # add $file without .exe
- rmfiles="$rmfiles $file"
- ;;
- esac
- # Do a test to see if this is a libtool program.
- if (${SED} -e '4q' $file | grep "^# Generated by .*$PACKAGE") >/dev/null 2>&1; then
- relink_command=
- . $dir/$noexename
-
- # note $name still contains .exe if it was in $file originally
- # as does the version of $file that was added into $rmfiles
- rmfiles="$rmfiles $objdir/$name $objdir/${name}S.${objext}"
- if test "$fast_install" = yes && test -n "$relink_command"; then
- rmfiles="$rmfiles $objdir/lt-$name"
- fi
- if test "X$noexename" != "X$name" ; then
- rmfiles="$rmfiles $objdir/lt-${noexename}.c"
- fi
- fi
- fi
- ;;
- esac
- $show "$rm $rmfiles"
- $run $rm $rmfiles || exit_status=1
- done
- objdir="$origobjdir"
-
- # Try to remove the ${objdir}s in the directories where we deleted files
- for dir in $rmdirs; do
- if test -d "$dir"; then
- $show "rmdir $dir"
- $run rmdir $dir >/dev/null 2>&1
- fi
- done
-
- exit $exit_status
- ;;
-
- "")
- $echo "$modename: you must specify a MODE" 1>&2
- $echo "$generic_help" 1>&2
- exit $EXIT_FAILURE
- ;;
- esac
-
- if test -z "$exec_cmd"; then
- $echo "$modename: invalid operation mode \`$mode'" 1>&2
- $echo "$generic_help" 1>&2
- exit $EXIT_FAILURE
- fi
-fi # test -z "$show_help"
-
-if test -n "$exec_cmd"; then
- eval exec $exec_cmd
- exit $EXIT_FAILURE
-fi
-
-# We need to display help for each of the modes.
-case $mode in
-"") $echo \
-"Usage: $modename [OPTION]... [MODE-ARG]...
-
-Provide generalized library-building support services.
-
- --config show all configuration variables
- --debug enable verbose shell tracing
--n, --dry-run display commands without modifying any files
- --features display basic configuration information and exit
- --finish same as \`--mode=finish'
- --help display this help message and exit
- --mode=MODE use operation mode MODE [default=inferred from MODE-ARGS]
- --quiet same as \`--silent'
- --silent don't print informational messages
- --tag=TAG use configuration variables from tag TAG
- --version print version information
-
-MODE must be one of the following:
-
- clean remove files from the build directory
- compile compile a source file into a libtool object
- execute automatically set library path, then run a program
- finish complete the installation of libtool libraries
- install install libraries or executables
- link create a library or an executable
- uninstall remove libraries from an installed directory
-
-MODE-ARGS vary depending on the MODE. Try \`$modename --help --mode=MODE' for
-a more detailed description of MODE.
-
-Report bugs to <bug-libtool@gnu.org>."
- exit $EXIT_SUCCESS
- ;;
-
-clean)
- $echo \
-"Usage: $modename [OPTION]... --mode=clean RM [RM-OPTION]... FILE...
-
-Remove files from the build directory.
-
-RM is the name of the program to use to delete files associated with each FILE
-(typically \`/bin/rm'). RM-OPTIONS are options (such as \`-f') to be passed
-to RM.
-
-If FILE is a libtool library, object or program, all the files associated
-with it are deleted. Otherwise, only FILE itself is deleted using RM."
- ;;
-
-compile)
- $echo \
-"Usage: $modename [OPTION]... --mode=compile COMPILE-COMMAND... SOURCEFILE
-
-Compile a source file into a libtool library object.
-
-This mode accepts the following additional options:
-
- -o OUTPUT-FILE set the output file name to OUTPUT-FILE
- -prefer-pic try to building PIC objects only
- -prefer-non-pic try to building non-PIC objects only
- -static always build a \`.o' file suitable for static linking
-
-COMPILE-COMMAND is a command to be used in creating a \`standard' object file
-from the given SOURCEFILE.
-
-The output file name is determined by removing the directory component from
-SOURCEFILE, then substituting the C source code suffix \`.c' with the
-library object suffix, \`.lo'."
- ;;
-
-execute)
- $echo \
-"Usage: $modename [OPTION]... --mode=execute COMMAND [ARGS]...
-
-Automatically set library path, then run a program.
-
-This mode accepts the following additional options:
-
- -dlopen FILE add the directory containing FILE to the library path
-
-This mode sets the library path environment variable according to \`-dlopen'
-flags.
-
-If any of the ARGS are libtool executable wrappers, then they are translated
-into their corresponding uninstalled binary, and any of their required library
-directories are added to the library path.
-
-Then, COMMAND is executed, with ARGS as arguments."
- ;;
-
-finish)
- $echo \
-"Usage: $modename [OPTION]... --mode=finish [LIBDIR]...
-
-Complete the installation of libtool libraries.
-
-Each LIBDIR is a directory that contains libtool libraries.
-
-The commands that this mode executes may require superuser privileges. Use
-the \`--dry-run' option if you just want to see what would be executed."
- ;;
-
-install)
- $echo \
-"Usage: $modename [OPTION]... --mode=install INSTALL-COMMAND...
-
-Install executables or libraries.
-
-INSTALL-COMMAND is the installation command. The first component should be
-either the \`install' or \`cp' program.
-
-The rest of the components are interpreted as arguments to that command (only
-BSD-compatible install options are recognized)."
- ;;
-
-link)
- $echo \
-"Usage: $modename [OPTION]... --mode=link LINK-COMMAND...
-
-Link object files or libraries together to form another library, or to
-create an executable program.
-
-LINK-COMMAND is a command using the C compiler that you would use to create
-a program from several object files.
-
-The following components of LINK-COMMAND are treated specially:
-
- -all-static do not do any dynamic linking at all
- -avoid-version do not add a version suffix if possible
- -dlopen FILE \`-dlpreopen' FILE if it cannot be dlopened at runtime
- -dlpreopen FILE link in FILE and add its symbols to lt_preloaded_symbols
- -export-dynamic allow symbols from OUTPUT-FILE to be resolved with dlsym(3)
- -export-symbols SYMFILE
- try to export only the symbols listed in SYMFILE
- -export-symbols-regex REGEX
- try to export only the symbols matching REGEX
- -LLIBDIR search LIBDIR for required installed libraries
- -lNAME OUTPUT-FILE requires the installed library libNAME
- -module build a library that can dlopened
- -no-fast-install disable the fast-install mode
- -no-install link a not-installable executable
- -no-undefined declare that a library does not refer to external symbols
- -o OUTPUT-FILE create OUTPUT-FILE from the specified objects
- -objectlist FILE Use a list of object files found in FILE to specify objects
- -precious-files-regex REGEX
- don't remove output files matching REGEX
- -release RELEASE specify package release information
- -rpath LIBDIR the created library will eventually be installed in LIBDIR
- -R[ ]LIBDIR add LIBDIR to the runtime path of programs and libraries
- -static do not do any dynamic linking of libtool libraries
- -version-info CURRENT[:REVISION[:AGE]]
- specify library version info [each variable defaults to 0]
-
-All other options (arguments beginning with \`-') are ignored.
-
-Every other argument is treated as a filename. Files ending in \`.la' are
-treated as uninstalled libtool libraries, other files are standard or library
-object files.
-
-If the OUTPUT-FILE ends in \`.la', then a libtool library is created,
-only library objects (\`.lo' files) may be specified, and \`-rpath' is
-required, except when creating a convenience library.
-
-If OUTPUT-FILE ends in \`.a' or \`.lib', then a standard library is created
-using \`ar' and \`ranlib', or on Windows using \`lib'.
-
-If OUTPUT-FILE ends in \`.lo' or \`.${objext}', then a reloadable object file
-is created, otherwise an executable program is created."
- ;;
-
-uninstall)
- $echo \
-"Usage: $modename [OPTION]... --mode=uninstall RM [RM-OPTION]... FILE...
-
-Remove libraries from an installation directory.
-
-RM is the name of the program to use to delete files associated with each FILE
-(typically \`/bin/rm'). RM-OPTIONS are options (such as \`-f') to be passed
-to RM.
-
-If FILE is a libtool library, all the files associated with it are deleted.
-Otherwise, only FILE itself is deleted using RM."
- ;;
-
-*)
- $echo "$modename: invalid operation mode \`$mode'" 1>&2
- $echo "$help" 1>&2
- exit $EXIT_FAILURE
- ;;
-esac
-
-$echo
-$echo "Try \`$modename --help' for more information about other modes."
-
-exit $?
-
-# The TAGs below are defined such that we never get into a situation
-# in which we disable both kinds of libraries. Given conflicting
-# choices, we go for a static library, that is the most portable,
-# since we can't tell whether shared libraries were disabled because
-# the user asked for that or because the platform doesn't support
-# them. This is particularly important on AIX, because we don't
-# support having both static and shared libraries enabled at the same
-# time on that platform, so we default to a shared-only configuration.
-# If a disable-shared tag is given, we'll fallback to a static-only
-# configuration. But we'll never go from static-only to shared-only.
-
-# ### BEGIN LIBTOOL TAG CONFIG: disable-shared
-disable_libs=shared
-# ### END LIBTOOL TAG CONFIG: disable-shared
-
-# ### BEGIN LIBTOOL TAG CONFIG: disable-static
-disable_libs=static
-# ### END LIBTOOL TAG CONFIG: disable-static
-
-# Local Variables:
-# mode:shell-script
-# sh-indentation:2
-# End:
diff --git a/Build/source/utils/xz-4.999.8beta/src/Makefile.am b/Build/source/utils/xz-4.999.8beta/src/Makefile.am
deleted file mode 100644
index 26e0588d372..00000000000
--- a/Build/source/utils/xz-4.999.8beta/src/Makefile.am
+++ /dev/null
@@ -1,16 +0,0 @@
-##
-## Copyright (C) 2007 Lasse Collin
-##
-## This library is free software; you can redistribute it and/or
-## modify it under the terms of the GNU Lesser General Public
-## License as published by the Free Software Foundation; either
-## version 2.1 of the License, or (at your option) any later version.
-##
-## This library is distributed in the hope that it will be useful,
-## but WITHOUT ANY WARRANTY; without even the implied warranty of
-## MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the GNU
-## Lesser General Public License for more details.
-##
-
-SUBDIRS = liblzma xz xzdec scripts
-EXTRA_DIST = common
diff --git a/Build/source/utils/xz-4.999.8beta/src/common/physmem.h b/Build/source/utils/xz-4.999.8beta/src/common/physmem.h
deleted file mode 100644
index a0e72c8eb78..00000000000
--- a/Build/source/utils/xz-4.999.8beta/src/common/physmem.h
+++ /dev/null
@@ -1,83 +0,0 @@
-///////////////////////////////////////////////////////////////////////////////
-//
-/// \file physmem.h
-/// \brief Get the amount of physical memory
-//
-// This code has been put into the public domain.
-//
-// This library is distributed in the hope that it will be useful,
-// but WITHOUT ANY WARRANTY; without even the implied warranty of
-// MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.
-//
-///////////////////////////////////////////////////////////////////////////////
-
-#ifndef PHYSMEM_H
-#define PHYSMEM_H
-
-#if defined(HAVE_PHYSMEM_SYSCTL) || defined(HAVE_NCPU_SYSCTL)
-# ifdef HAVE_SYS_PARAM_H
-# include <sys/param.h>
-# endif
-# ifdef HAVE_SYS_SYSCTL_H
-# include <sys/sysctl.h>
-# endif
-#endif
-
-#if defined(HAVE_PHYSMEM_SYSCONF) || defined(HAVE_NCPU_SYSCONF)
-# include <unistd.h>
-#endif
-
-#ifdef _WIN32
-# ifndef _WIN32_WINNT
-# define _WIN32_WINNT 0x0500
-# endif
-# include <windows.h>
-#endif
-
-
-/// \brief Get the amount of physical memory in bytes
-///
-/// \return Amount of physical memory in bytes. On error, zero is
-/// returned.
-static inline uint64_t
-physmem(void)
-{
- uint64_t ret = 0;
-
-#if defined(HAVE_PHYSMEM_SYSCONF)
- const long pagesize = sysconf(_SC_PAGESIZE);
- const long pages = sysconf(_SC_PHYS_PAGES);
- if (pagesize != -1 || pages != -1)
- // According to docs, pagesize * pages can overflow.
- // Simple case is 32-bit box with 4 GiB or more RAM,
- // which may report exactly 4 GiB of RAM, and "long"
- // being 32-bit will overflow. Casting to uint64_t
- // hopefully avoids overflows in the near future.
- ret = (uint64_t)(pagesize) * (uint64_t)(pages);
-
-#elif defined(HAVE_PHYSMEM_SYSCTL)
- int name[2] = { CTL_HW, HW_PHYSMEM };
- unsigned long mem;
- size_t mem_ptr_size = sizeof(mem);
- if (!sysctl(name, 2, &mem, &mem_ptr_size, NULL, NULL)) {
- // Some systems use unsigned int as the "return value".
- // This makes a difference on 64-bit boxes.
- if (mem_ptr_size != sizeof(mem)) {
- if (mem_ptr_size == sizeof(unsigned int))
- ret = *(unsigned int *)(&mem);
- } else {
- ret = mem;
- }
- }
-
-#elif defined(_WIN32)
- MEMORYSTATUSEX meminfo;
- meminfo.dwLength = sizeof(meminfo);
- if (GlobalMemoryStatusEx(&meminfo))
- ret = meminfo.ullTotalPhys;
-#endif
-
- return ret;
-}
-
-#endif
diff --git a/Build/source/utils/xz-4.999.8beta/src/liblzma/Makefile.am b/Build/source/utils/xz-4.999.8beta/src/liblzma/Makefile.am
deleted file mode 100644
index 14e168f450e..00000000000
--- a/Build/source/utils/xz-4.999.8beta/src/liblzma/Makefile.am
+++ /dev/null
@@ -1,56 +0,0 @@
-##
-## Copyright (C) 2007 Lasse Collin
-##
-## This library is free software; you can redistribute it and/or
-## modify it under the terms of the GNU Lesser General Public
-## License as published by the Free Software Foundation; either
-## version 2.1 of the License, or (at your option) any later version.
-##
-## This library is distributed in the hope that it will be useful,
-## but WITHOUT ANY WARRANTY; without even the implied warranty of
-## MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the GNU
-## Lesser General Public License for more details.
-##
-
-SUBDIRS = api common check
-
-lib_LTLIBRARIES = liblzma.la
-liblzma_la_SOURCES =
-liblzma_la_LDFLAGS = -version-info 0:0:0
-
-liblzma_la_LIBADD = \
- common/libcommon.la \
- check/libcheck.la
-
-if COND_FILTER_LZ
-SUBDIRS += lz
-liblzma_la_LIBADD += lz/liblz.la
-endif
-
-if COND_FILTER_LZMA1
-SUBDIRS += lzma rangecoder
-liblzma_la_LIBADD += \
- lzma/liblzma2.la \
- rangecoder/librangecoder.la
-endif
-
-if COND_FILTER_SUBBLOCK
-SUBDIRS += subblock
-liblzma_la_LIBADD += subblock/libsubblock.la
-endif
-
-if COND_FILTER_DELTA
-SUBDIRS += delta
-liblzma_la_LIBADD += delta/libdelta.la
-endif
-
-if COND_FILTER_SIMPLE
-SUBDIRS += simple
-liblzma_la_LIBADD += simple/libsimple.la
-endif
-
-
-## pkg-config
-pkgconfigdir = $(libdir)/pkgconfig
-pkgconfig_DATA = liblzma.pc
-EXTRA_DIST = liblzma.pc.in
diff --git a/Build/source/utils/xz-4.999.8beta/src/liblzma/Makefile.in b/Build/source/utils/xz-4.999.8beta/src/liblzma/Makefile.in
deleted file mode 100644
index 570acbe08b1..00000000000
--- a/Build/source/utils/xz-4.999.8beta/src/liblzma/Makefile.in
+++ /dev/null
@@ -1,631 +0,0 @@
-# Makefile.in generated by automake 1.10.2 from Makefile.am.
-# @configure_input@
-
-# Copyright (C) 1994, 1995, 1996, 1997, 1998, 1999, 2000, 2001, 2002,
-# 2003, 2004, 2005, 2006, 2007, 2008 Free Software Foundation, Inc.
-# This Makefile.in is free software; the Free Software Foundation
-# gives unlimited permission to copy and/or distribute it,
-# with or without modifications, as long as this notice is preserved.
-
-# This program is distributed in the hope that it will be useful,
-# but WITHOUT ANY WARRANTY, to the extent permitted by law; without
-# even the implied warranty of MERCHANTABILITY or FITNESS FOR A
-# PARTICULAR PURPOSE.
-
-@SET_MAKE@
-
-
-VPATH = @srcdir@
-pkgdatadir = $(datadir)/@PACKAGE@
-pkglibdir = $(libdir)/@PACKAGE@
-pkgincludedir = $(includedir)/@PACKAGE@
-am__cd = CDPATH="$${ZSH_VERSION+.}$(PATH_SEPARATOR)" && cd
-install_sh_DATA = $(install_sh) -c -m 644
-install_sh_PROGRAM = $(install_sh) -c
-install_sh_SCRIPT = $(install_sh) -c
-INSTALL_HEADER = $(INSTALL_DATA)
-transform = $(program_transform_name)
-NORMAL_INSTALL = :
-PRE_INSTALL = :
-POST_INSTALL = :
-NORMAL_UNINSTALL = :
-PRE_UNINSTALL = :
-POST_UNINSTALL = :
-build_triplet = @build@
-host_triplet = @host@
-@COND_FILTER_LZ_TRUE@am__append_1 = lz
-@COND_FILTER_LZ_TRUE@am__append_2 = lz/liblz.la
-@COND_FILTER_LZMA1_TRUE@am__append_3 = lzma rangecoder
-@COND_FILTER_LZMA1_TRUE@am__append_4 = \
-@COND_FILTER_LZMA1_TRUE@ lzma/liblzma2.la \
-@COND_FILTER_LZMA1_TRUE@ rangecoder/librangecoder.la
-
-@COND_FILTER_SUBBLOCK_TRUE@am__append_5 = subblock
-@COND_FILTER_SUBBLOCK_TRUE@am__append_6 = subblock/libsubblock.la
-@COND_FILTER_DELTA_TRUE@am__append_7 = delta
-@COND_FILTER_DELTA_TRUE@am__append_8 = delta/libdelta.la
-@COND_FILTER_SIMPLE_TRUE@am__append_9 = simple
-@COND_FILTER_SIMPLE_TRUE@am__append_10 = simple/libsimple.la
-subdir = src/liblzma
-DIST_COMMON = $(srcdir)/Makefile.am $(srcdir)/Makefile.in \
- $(srcdir)/liblzma.pc.in
-ACLOCAL_M4 = $(top_srcdir)/aclocal.m4
-am__aclocal_m4_deps = $(top_srcdir)/m4/acx_pthread.m4 \
- $(top_srcdir)/m4/getopt.m4 $(top_srcdir)/m4/gettext.m4 \
- $(top_srcdir)/m4/iconv.m4 $(top_srcdir)/m4/lib-ld.m4 \
- $(top_srcdir)/m4/lib-link.m4 $(top_srcdir)/m4/lib-prefix.m4 \
- $(top_srcdir)/m4/nls.m4 $(top_srcdir)/m4/po.m4 \
- $(top_srcdir)/m4/progtest.m4 $(top_srcdir)/configure.ac
-am__configure_deps = $(am__aclocal_m4_deps) $(CONFIGURE_DEPENDENCIES) \
- $(ACLOCAL_M4)
-mkinstalldirs = $(install_sh) -d
-CONFIG_HEADER = $(top_builddir)/config.h
-CONFIG_CLEAN_FILES = liblzma.pc
-am__vpath_adj_setup = srcdirstrip=`echo "$(srcdir)" | sed 's|.|.|g'`;
-am__vpath_adj = case $$p in \
- $(srcdir)/*) f=`echo "$$p" | sed "s|^$$srcdirstrip/||"`;; \
- *) f=$$p;; \
- esac;
-am__strip_dir = `echo $$p | sed -e 's|^.*/||'`;
-am__installdirs = "$(DESTDIR)$(libdir)" "$(DESTDIR)$(pkgconfigdir)"
-libLTLIBRARIES_INSTALL = $(INSTALL)
-LTLIBRARIES = $(lib_LTLIBRARIES)
-liblzma_la_DEPENDENCIES = common/libcommon.la check/libcheck.la \
- $(am__append_2) $(am__append_4) $(am__append_6) \
- $(am__append_8) $(am__append_10)
-am_liblzma_la_OBJECTS =
-liblzma_la_OBJECTS = $(am_liblzma_la_OBJECTS)
-liblzma_la_LINK = $(LIBTOOL) --tag=CC $(AM_LIBTOOLFLAGS) \
- $(LIBTOOLFLAGS) --mode=link $(CCLD) $(AM_CFLAGS) $(CFLAGS) \
- $(liblzma_la_LDFLAGS) $(LDFLAGS) -o $@
-DEFAULT_INCLUDES = -I.@am__isrc@ -I$(top_builddir)
-COMPILE = $(CC) $(DEFS) $(DEFAULT_INCLUDES) $(INCLUDES) $(AM_CPPFLAGS) \
- $(CPPFLAGS) $(AM_CFLAGS) $(CFLAGS)
-LTCOMPILE = $(LIBTOOL) --tag=CC $(AM_LIBTOOLFLAGS) $(LIBTOOLFLAGS) \
- --mode=compile $(CC) $(DEFS) $(DEFAULT_INCLUDES) $(INCLUDES) \
- $(AM_CPPFLAGS) $(CPPFLAGS) $(AM_CFLAGS) $(CFLAGS)
-CCLD = $(CC)
-LINK = $(LIBTOOL) --tag=CC $(AM_LIBTOOLFLAGS) $(LIBTOOLFLAGS) \
- --mode=link $(CCLD) $(AM_CFLAGS) $(CFLAGS) $(AM_LDFLAGS) \
- $(LDFLAGS) -o $@
-SOURCES = $(liblzma_la_SOURCES)
-DIST_SOURCES = $(liblzma_la_SOURCES)
-RECURSIVE_TARGETS = all-recursive check-recursive dvi-recursive \
- html-recursive info-recursive install-data-recursive \
- install-dvi-recursive install-exec-recursive \
- install-html-recursive install-info-recursive \
- install-pdf-recursive install-ps-recursive install-recursive \
- installcheck-recursive installdirs-recursive pdf-recursive \
- ps-recursive uninstall-recursive
-pkgconfigDATA_INSTALL = $(INSTALL_DATA)
-DATA = $(pkgconfig_DATA)
-RECURSIVE_CLEAN_TARGETS = mostlyclean-recursive clean-recursive \
- distclean-recursive maintainer-clean-recursive
-ETAGS = etags
-CTAGS = ctags
-DIST_SUBDIRS = api common check lz lzma rangecoder subblock delta \
- simple
-DISTFILES = $(DIST_COMMON) $(DIST_SOURCES) $(TEXINFOS) $(EXTRA_DIST)
-ACLOCAL = @ACLOCAL@
-AMTAR = @AMTAR@
-AR = @AR@
-AUTOCONF = @AUTOCONF@
-AUTOHEADER = @AUTOHEADER@
-AUTOMAKE = @AUTOMAKE@
-AWK = @AWK@
-CC = @CC@
-CCAS = @CCAS@
-CCASDEPMODE = @CCASDEPMODE@
-CCASFLAGS = @CCASFLAGS@
-CCDEPMODE = @CCDEPMODE@
-CFLAGS = @CFLAGS@
-CFLAG_VISIBILITY = @CFLAG_VISIBILITY@
-CPP = @CPP@
-CPPFLAGS = @CPPFLAGS@
-CXX = @CXX@
-CXXCPP = @CXXCPP@
-CXXDEPMODE = @CXXDEPMODE@
-CXXFLAGS = @CXXFLAGS@
-CYGPATH_W = @CYGPATH_W@
-DEFS = @DEFS@
-DEPDIR = @DEPDIR@
-DSYMUTIL = @DSYMUTIL@
-ECHO = @ECHO@
-ECHO_C = @ECHO_C@
-ECHO_N = @ECHO_N@
-ECHO_T = @ECHO_T@
-EGREP = @EGREP@
-EXEEXT = @EXEEXT@
-F77 = @F77@
-FFLAGS = @FFLAGS@
-GETOPT_H = @GETOPT_H@
-GMSGFMT = @GMSGFMT@
-GMSGFMT_015 = @GMSGFMT_015@
-GREP = @GREP@
-HAVE_VISIBILITY = @HAVE_VISIBILITY@
-INSTALL = @INSTALL@
-INSTALL_DATA = @INSTALL_DATA@
-INSTALL_PROGRAM = @INSTALL_PROGRAM@
-INSTALL_SCRIPT = @INSTALL_SCRIPT@
-INSTALL_STRIP_PROGRAM = @INSTALL_STRIP_PROGRAM@
-INTLLIBS = @INTLLIBS@
-INTL_MACOSX_LIBS = @INTL_MACOSX_LIBS@
-LDFLAGS = @LDFLAGS@
-LIBICONV = @LIBICONV@
-LIBINTL = @LIBINTL@
-LIBOBJS = @LIBOBJS@
-LIBS = @LIBS@
-LIBTOOL = @LIBTOOL@
-LN_S = @LN_S@
-LTLIBICONV = @LTLIBICONV@
-LTLIBINTL = @LTLIBINTL@
-LTLIBOBJS = @LTLIBOBJS@
-MAKEINFO = @MAKEINFO@
-MKDIR_P = @MKDIR_P@
-MSGFMT = @MSGFMT@
-MSGFMT_015 = @MSGFMT_015@
-MSGMERGE = @MSGMERGE@
-NMEDIT = @NMEDIT@
-OBJEXT = @OBJEXT@
-PACKAGE = @PACKAGE@
-PACKAGE_BUGREPORT = @PACKAGE_BUGREPORT@
-PACKAGE_NAME = @PACKAGE_NAME@
-PACKAGE_STRING = @PACKAGE_STRING@
-PACKAGE_TARNAME = @PACKAGE_TARNAME@
-PACKAGE_VERSION = @PACKAGE_VERSION@
-PATH_SEPARATOR = @PATH_SEPARATOR@
-POSUB = @POSUB@
-PTHREAD_CC = @PTHREAD_CC@
-PTHREAD_CFLAGS = @PTHREAD_CFLAGS@
-PTHREAD_LIBS = @PTHREAD_LIBS@
-RANLIB = @RANLIB@
-SED = @SED@
-SET_MAKE = @SET_MAKE@
-SHELL = @SHELL@
-STRIP = @STRIP@
-USE_NLS = @USE_NLS@
-VERSION = @VERSION@
-XGETTEXT = @XGETTEXT@
-XGETTEXT_015 = @XGETTEXT_015@
-abs_builddir = @abs_builddir@
-abs_srcdir = @abs_srcdir@
-abs_top_builddir = @abs_top_builddir@
-abs_top_srcdir = @abs_top_srcdir@
-ac_ct_CC = @ac_ct_CC@
-ac_ct_CXX = @ac_ct_CXX@
-ac_ct_F77 = @ac_ct_F77@
-acx_pthread_config = @acx_pthread_config@
-am__include = @am__include@
-am__leading_dot = @am__leading_dot@
-am__quote = @am__quote@
-am__tar = @am__tar@
-am__untar = @am__untar@
-bindir = @bindir@
-build = @build@
-build_alias = @build_alias@
-build_cpu = @build_cpu@
-build_os = @build_os@
-build_vendor = @build_vendor@
-builddir = @builddir@
-datadir = @datadir@
-datarootdir = @datarootdir@
-docdir = @docdir@
-dvidir = @dvidir@
-exec_prefix = @exec_prefix@
-host = @host@
-host_alias = @host_alias@
-host_cpu = @host_cpu@
-host_os = @host_os@
-host_vendor = @host_vendor@
-htmldir = @htmldir@
-includedir = @includedir@
-infodir = @infodir@
-install_sh = @install_sh@
-libdir = @libdir@
-libexecdir = @libexecdir@
-localedir = @localedir@
-localstatedir = @localstatedir@
-mandir = @mandir@
-mkdir_p = @mkdir_p@
-oldincludedir = @oldincludedir@
-pdfdir = @pdfdir@
-prefix = @prefix@
-program_transform_name = @program_transform_name@
-psdir = @psdir@
-sbindir = @sbindir@
-sharedstatedir = @sharedstatedir@
-srcdir = @srcdir@
-sysconfdir = @sysconfdir@
-target_alias = @target_alias@
-top_build_prefix = @top_build_prefix@
-top_builddir = @top_builddir@
-top_srcdir = @top_srcdir@
-SUBDIRS = api common check $(am__append_1) $(am__append_3) \
- $(am__append_5) $(am__append_7) $(am__append_9)
-lib_LTLIBRARIES = liblzma.la
-liblzma_la_SOURCES =
-liblzma_la_LDFLAGS = -version-info 0:0:0
-liblzma_la_LIBADD = common/libcommon.la check/libcheck.la \
- $(am__append_2) $(am__append_4) $(am__append_6) \
- $(am__append_8) $(am__append_10)
-pkgconfigdir = $(libdir)/pkgconfig
-pkgconfig_DATA = liblzma.pc
-EXTRA_DIST = liblzma.pc.in
-all: all-recursive
-
-.SUFFIXES:
-$(srcdir)/Makefile.in: $(srcdir)/Makefile.am $(am__configure_deps)
- @for dep in $?; do \
- case '$(am__configure_deps)' in \
- *$$dep*) \
- ( cd $(top_builddir) && $(MAKE) $(AM_MAKEFLAGS) am--refresh ) \
- && { if test -f $@; then exit 0; else break; fi; }; \
- exit 1;; \
- esac; \
- done; \
- echo ' cd $(top_srcdir) && $(AUTOMAKE) --foreign src/liblzma/Makefile'; \
- cd $(top_srcdir) && \
- $(AUTOMAKE) --foreign src/liblzma/Makefile
-.PRECIOUS: Makefile
-Makefile: $(srcdir)/Makefile.in $(top_builddir)/config.status
- @case '$?' in \
- *config.status*) \
- cd $(top_builddir) && $(MAKE) $(AM_MAKEFLAGS) am--refresh;; \
- *) \
- echo ' cd $(top_builddir) && $(SHELL) ./config.status $(subdir)/$@ $(am__depfiles_maybe)'; \
- cd $(top_builddir) && $(SHELL) ./config.status $(subdir)/$@ $(am__depfiles_maybe);; \
- esac;
-
-$(top_builddir)/config.status: $(top_srcdir)/configure $(CONFIG_STATUS_DEPENDENCIES)
- cd $(top_builddir) && $(MAKE) $(AM_MAKEFLAGS) am--refresh
-
-$(top_srcdir)/configure: $(am__configure_deps)
- cd $(top_builddir) && $(MAKE) $(AM_MAKEFLAGS) am--refresh
-$(ACLOCAL_M4): $(am__aclocal_m4_deps)
- cd $(top_builddir) && $(MAKE) $(AM_MAKEFLAGS) am--refresh
-liblzma.pc: $(top_builddir)/config.status $(srcdir)/liblzma.pc.in
- cd $(top_builddir) && $(SHELL) ./config.status $(subdir)/$@
-install-libLTLIBRARIES: $(lib_LTLIBRARIES)
- @$(NORMAL_INSTALL)
- test -z "$(libdir)" || $(MKDIR_P) "$(DESTDIR)$(libdir)"
- @list='$(lib_LTLIBRARIES)'; for p in $$list; do \
- if test -f $$p; then \
- f=$(am__strip_dir) \
- echo " $(LIBTOOL) $(AM_LIBTOOLFLAGS) $(LIBTOOLFLAGS) --mode=install $(libLTLIBRARIES_INSTALL) $(INSTALL_STRIP_FLAG) '$$p' '$(DESTDIR)$(libdir)/$$f'"; \
- $(LIBTOOL) $(AM_LIBTOOLFLAGS) $(LIBTOOLFLAGS) --mode=install $(libLTLIBRARIES_INSTALL) $(INSTALL_STRIP_FLAG) "$$p" "$(DESTDIR)$(libdir)/$$f"; \
- else :; fi; \
- done
-
-uninstall-libLTLIBRARIES:
- @$(NORMAL_UNINSTALL)
- @list='$(lib_LTLIBRARIES)'; for p in $$list; do \
- p=$(am__strip_dir) \
- echo " $(LIBTOOL) $(AM_LIBTOOLFLAGS) $(LIBTOOLFLAGS) --mode=uninstall rm -f '$(DESTDIR)$(libdir)/$$p'"; \
- $(LIBTOOL) $(AM_LIBTOOLFLAGS) $(LIBTOOLFLAGS) --mode=uninstall rm -f "$(DESTDIR)$(libdir)/$$p"; \
- done
-
-clean-libLTLIBRARIES:
- -test -z "$(lib_LTLIBRARIES)" || rm -f $(lib_LTLIBRARIES)
- @list='$(lib_LTLIBRARIES)'; for p in $$list; do \
- dir="`echo $$p | sed -e 's|/[^/]*$$||'`"; \
- test "$$dir" != "$$p" || dir=.; \
- echo "rm -f \"$${dir}/so_locations\""; \
- rm -f "$${dir}/so_locations"; \
- done
-liblzma.la: $(liblzma_la_OBJECTS) $(liblzma_la_DEPENDENCIES)
- $(liblzma_la_LINK) -rpath $(libdir) $(liblzma_la_OBJECTS) $(liblzma_la_LIBADD) $(LIBS)
-
-mostlyclean-compile:
- -rm -f *.$(OBJEXT)
-
-distclean-compile:
- -rm -f *.tab.c
-
-mostlyclean-libtool:
- -rm -f *.lo
-
-clean-libtool:
- -rm -rf .libs _libs
-install-pkgconfigDATA: $(pkgconfig_DATA)
- @$(NORMAL_INSTALL)
- test -z "$(pkgconfigdir)" || $(MKDIR_P) "$(DESTDIR)$(pkgconfigdir)"
- @list='$(pkgconfig_DATA)'; for p in $$list; do \
- if test -f "$$p"; then d=; else d="$(srcdir)/"; fi; \
- f=$(am__strip_dir) \
- echo " $(pkgconfigDATA_INSTALL) '$$d$$p' '$(DESTDIR)$(pkgconfigdir)/$$f'"; \
- $(pkgconfigDATA_INSTALL) "$$d$$p" "$(DESTDIR)$(pkgconfigdir)/$$f"; \
- done
-
-uninstall-pkgconfigDATA:
- @$(NORMAL_UNINSTALL)
- @list='$(pkgconfig_DATA)'; for p in $$list; do \
- f=$(am__strip_dir) \
- echo " rm -f '$(DESTDIR)$(pkgconfigdir)/$$f'"; \
- rm -f "$(DESTDIR)$(pkgconfigdir)/$$f"; \
- done
-
-# This directory's subdirectories are mostly independent; you can cd
-# into them and run `make' without going through this Makefile.
-# To change the values of `make' variables: instead of editing Makefiles,
-# (1) if the variable is set in `config.status', edit `config.status'
-# (which will cause the Makefiles to be regenerated when you run `make');
-# (2) otherwise, pass the desired values on the `make' command line.
-$(RECURSIVE_TARGETS):
- @failcom='exit 1'; \
- for f in x $$MAKEFLAGS; do \
- case $$f in \
- *=* | --[!k]*);; \
- *k*) failcom='fail=yes';; \
- esac; \
- done; \
- dot_seen=no; \
- target=`echo $@ | sed s/-recursive//`; \
- list='$(SUBDIRS)'; for subdir in $$list; do \
- echo "Making $$target in $$subdir"; \
- if test "$$subdir" = "."; then \
- dot_seen=yes; \
- local_target="$$target-am"; \
- else \
- local_target="$$target"; \
- fi; \
- (cd $$subdir && $(MAKE) $(AM_MAKEFLAGS) $$local_target) \
- || eval $$failcom; \
- done; \
- if test "$$dot_seen" = "no"; then \
- $(MAKE) $(AM_MAKEFLAGS) "$$target-am" || exit 1; \
- fi; test -z "$$fail"
-
-$(RECURSIVE_CLEAN_TARGETS):
- @failcom='exit 1'; \
- for f in x $$MAKEFLAGS; do \
- case $$f in \
- *=* | --[!k]*);; \
- *k*) failcom='fail=yes';; \
- esac; \
- done; \
- dot_seen=no; \
- case "$@" in \
- distclean-* | maintainer-clean-*) list='$(DIST_SUBDIRS)' ;; \
- *) list='$(SUBDIRS)' ;; \
- esac; \
- rev=''; for subdir in $$list; do \
- if test "$$subdir" = "."; then :; else \
- rev="$$subdir $$rev"; \
- fi; \
- done; \
- rev="$$rev ."; \
- target=`echo $@ | sed s/-recursive//`; \
- for subdir in $$rev; do \
- echo "Making $$target in $$subdir"; \
- if test "$$subdir" = "."; then \
- local_target="$$target-am"; \
- else \
- local_target="$$target"; \
- fi; \
- (cd $$subdir && $(MAKE) $(AM_MAKEFLAGS) $$local_target) \
- || eval $$failcom; \
- done && test -z "$$fail"
-tags-recursive:
- list='$(SUBDIRS)'; for subdir in $$list; do \
- test "$$subdir" = . || (cd $$subdir && $(MAKE) $(AM_MAKEFLAGS) tags); \
- done
-ctags-recursive:
- list='$(SUBDIRS)'; for subdir in $$list; do \
- test "$$subdir" = . || (cd $$subdir && $(MAKE) $(AM_MAKEFLAGS) ctags); \
- done
-
-ID: $(HEADERS) $(SOURCES) $(LISP) $(TAGS_FILES)
- list='$(SOURCES) $(HEADERS) $(LISP) $(TAGS_FILES)'; \
- unique=`for i in $$list; do \
- if test -f "$$i"; then echo $$i; else echo $(srcdir)/$$i; fi; \
- done | \
- $(AWK) '{ files[$$0] = 1; nonempty = 1; } \
- END { if (nonempty) { for (i in files) print i; }; }'`; \
- mkid -fID $$unique
-tags: TAGS
-
-TAGS: tags-recursive $(HEADERS) $(SOURCES) $(TAGS_DEPENDENCIES) \
- $(TAGS_FILES) $(LISP)
- tags=; \
- here=`pwd`; \
- if ($(ETAGS) --etags-include --version) >/dev/null 2>&1; then \
- include_option=--etags-include; \
- empty_fix=.; \
- else \
- include_option=--include; \
- empty_fix=; \
- fi; \
- list='$(SUBDIRS)'; for subdir in $$list; do \
- if test "$$subdir" = .; then :; else \
- test ! -f $$subdir/TAGS || \
- tags="$$tags $$include_option=$$here/$$subdir/TAGS"; \
- fi; \
- done; \
- list='$(SOURCES) $(HEADERS) $(LISP) $(TAGS_FILES)'; \
- unique=`for i in $$list; do \
- if test -f "$$i"; then echo $$i; else echo $(srcdir)/$$i; fi; \
- done | \
- $(AWK) '{ files[$$0] = 1; nonempty = 1; } \
- END { if (nonempty) { for (i in files) print i; }; }'`; \
- if test -z "$(ETAGS_ARGS)$$tags$$unique"; then :; else \
- test -n "$$unique" || unique=$$empty_fix; \
- $(ETAGS) $(ETAGSFLAGS) $(AM_ETAGSFLAGS) $(ETAGS_ARGS) \
- $$tags $$unique; \
- fi
-ctags: CTAGS
-CTAGS: ctags-recursive $(HEADERS) $(SOURCES) $(TAGS_DEPENDENCIES) \
- $(TAGS_FILES) $(LISP)
- tags=; \
- list='$(SOURCES) $(HEADERS) $(LISP) $(TAGS_FILES)'; \
- unique=`for i in $$list; do \
- if test -f "$$i"; then echo $$i; else echo $(srcdir)/$$i; fi; \
- done | \
- $(AWK) '{ files[$$0] = 1; nonempty = 1; } \
- END { if (nonempty) { for (i in files) print i; }; }'`; \
- test -z "$(CTAGS_ARGS)$$tags$$unique" \
- || $(CTAGS) $(CTAGSFLAGS) $(AM_CTAGSFLAGS) $(CTAGS_ARGS) \
- $$tags $$unique
-
-GTAGS:
- here=`$(am__cd) $(top_builddir) && pwd` \
- && cd $(top_srcdir) \
- && gtags -i $(GTAGS_ARGS) $$here
-
-distclean-tags:
- -rm -f TAGS ID GTAGS GRTAGS GSYMS GPATH tags
-
-distdir: $(DISTFILES)
- @srcdirstrip=`echo "$(srcdir)" | sed 's/[].[^$$\\*]/\\\\&/g'`; \
- topsrcdirstrip=`echo "$(top_srcdir)" | sed 's/[].[^$$\\*]/\\\\&/g'`; \
- list='$(DISTFILES)'; \
- dist_files=`for file in $$list; do echo $$file; done | \
- sed -e "s|^$$srcdirstrip/||;t" \
- -e "s|^$$topsrcdirstrip/|$(top_builddir)/|;t"`; \
- case $$dist_files in \
- */*) $(MKDIR_P) `echo "$$dist_files" | \
- sed '/\//!d;s|^|$(distdir)/|;s,/[^/]*$$,,' | \
- sort -u` ;; \
- esac; \
- for file in $$dist_files; do \
- if test -f $$file || test -d $$file; then d=.; else d=$(srcdir); fi; \
- if test -d $$d/$$file; then \
- dir=`echo "/$$file" | sed -e 's,/[^/]*$$,,'`; \
- if test -d $(srcdir)/$$file && test $$d != $(srcdir); then \
- cp -pR $(srcdir)/$$file $(distdir)$$dir || exit 1; \
- fi; \
- cp -pR $$d/$$file $(distdir)$$dir || exit 1; \
- else \
- test -f $(distdir)/$$file \
- || cp -p $$d/$$file $(distdir)/$$file \
- || exit 1; \
- fi; \
- done
- list='$(DIST_SUBDIRS)'; for subdir in $$list; do \
- if test "$$subdir" = .; then :; else \
- test -d "$(distdir)/$$subdir" \
- || $(MKDIR_P) "$(distdir)/$$subdir" \
- || exit 1; \
- distdir=`$(am__cd) $(distdir) && pwd`; \
- top_distdir=`$(am__cd) $(top_distdir) && pwd`; \
- (cd $$subdir && \
- $(MAKE) $(AM_MAKEFLAGS) \
- top_distdir="$$top_distdir" \
- distdir="$$distdir/$$subdir" \
- am__remove_distdir=: \
- am__skip_length_check=: \
- distdir) \
- || exit 1; \
- fi; \
- done
-check-am: all-am
-check: check-recursive
-all-am: Makefile $(LTLIBRARIES) $(DATA)
-installdirs: installdirs-recursive
-installdirs-am:
- for dir in "$(DESTDIR)$(libdir)" "$(DESTDIR)$(pkgconfigdir)"; do \
- test -z "$$dir" || $(MKDIR_P) "$$dir"; \
- done
-install: install-recursive
-install-exec: install-exec-recursive
-install-data: install-data-recursive
-uninstall: uninstall-recursive
-
-install-am: all-am
- @$(MAKE) $(AM_MAKEFLAGS) install-exec-am install-data-am
-
-installcheck: installcheck-recursive
-install-strip:
- $(MAKE) $(AM_MAKEFLAGS) INSTALL_PROGRAM="$(INSTALL_STRIP_PROGRAM)" \
- install_sh_PROGRAM="$(INSTALL_STRIP_PROGRAM)" INSTALL_STRIP_FLAG=-s \
- `test -z '$(STRIP)' || \
- echo "INSTALL_PROGRAM_ENV=STRIPPROG='$(STRIP)'"` install
-mostlyclean-generic:
-
-clean-generic:
-
-distclean-generic:
- -test -z "$(CONFIG_CLEAN_FILES)" || rm -f $(CONFIG_CLEAN_FILES)
-
-maintainer-clean-generic:
- @echo "This command is intended for maintainers to use"
- @echo "it deletes files that may require special tools to rebuild."
-clean: clean-recursive
-
-clean-am: clean-generic clean-libLTLIBRARIES clean-libtool \
- mostlyclean-am
-
-distclean: distclean-recursive
- -rm -f Makefile
-distclean-am: clean-am distclean-compile distclean-generic \
- distclean-tags
-
-dvi: dvi-recursive
-
-dvi-am:
-
-html: html-recursive
-
-info: info-recursive
-
-info-am:
-
-install-data-am: install-pkgconfigDATA
-
-install-dvi: install-dvi-recursive
-
-install-exec-am: install-libLTLIBRARIES
-
-install-html: install-html-recursive
-
-install-info: install-info-recursive
-
-install-man:
-
-install-pdf: install-pdf-recursive
-
-install-ps: install-ps-recursive
-
-installcheck-am:
-
-maintainer-clean: maintainer-clean-recursive
- -rm -f Makefile
-maintainer-clean-am: distclean-am maintainer-clean-generic
-
-mostlyclean: mostlyclean-recursive
-
-mostlyclean-am: mostlyclean-compile mostlyclean-generic \
- mostlyclean-libtool
-
-pdf: pdf-recursive
-
-pdf-am:
-
-ps: ps-recursive
-
-ps-am:
-
-uninstall-am: uninstall-libLTLIBRARIES uninstall-pkgconfigDATA
-
-.MAKE: $(RECURSIVE_CLEAN_TARGETS) $(RECURSIVE_TARGETS) install-am \
- install-strip
-
-.PHONY: $(RECURSIVE_CLEAN_TARGETS) $(RECURSIVE_TARGETS) CTAGS GTAGS \
- all all-am check check-am clean clean-generic \
- clean-libLTLIBRARIES clean-libtool ctags ctags-recursive \
- distclean distclean-compile distclean-generic \
- distclean-libtool distclean-tags distdir dvi dvi-am html \
- html-am info info-am install install-am install-data \
- install-data-am install-dvi install-dvi-am install-exec \
- install-exec-am install-html install-html-am install-info \
- install-info-am install-libLTLIBRARIES install-man install-pdf \
- install-pdf-am install-pkgconfigDATA install-ps install-ps-am \
- install-strip installcheck installcheck-am installdirs \
- installdirs-am maintainer-clean maintainer-clean-generic \
- mostlyclean mostlyclean-compile mostlyclean-generic \
- mostlyclean-libtool pdf pdf-am ps ps-am tags tags-recursive \
- uninstall uninstall-am uninstall-libLTLIBRARIES \
- uninstall-pkgconfigDATA
-
-# Tell versions [3.59,3.63) of GNU make to not export all variables.
-# Otherwise a system limit (for SysV at least) may be exceeded.
-.NOEXPORT:
diff --git a/Build/source/utils/xz-4.999.8beta/src/liblzma/api/Makefile.am b/Build/source/utils/xz-4.999.8beta/src/liblzma/api/Makefile.am
deleted file mode 100644
index 12953c4167c..00000000000
--- a/Build/source/utils/xz-4.999.8beta/src/liblzma/api/Makefile.am
+++ /dev/null
@@ -1,30 +0,0 @@
-##
-## Copyright (C) 2007 Lasse Collin
-##
-## This library is free software; you can redistribute it and/or
-## modify it under the terms of the GNU Lesser General Public
-## License as published by the Free Software Foundation; either
-## version 2.1 of the License, or (at your option) any later version.
-##
-## This library is distributed in the hope that it will be useful,
-## but WITHOUT ANY WARRANTY; without even the implied warranty of
-## MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the GNU
-## Lesser General Public License for more details.
-##
-
-nobase_include_HEADERS = \
- lzma.h \
- lzma/base.h \
- lzma/bcj.h \
- lzma/block.h \
- lzma/check.h \
- lzma/container.h \
- lzma/delta.h \
- lzma/filter.h \
- lzma/index.h \
- lzma/index_hash.h \
- lzma/lzma.h \
- lzma/stream_flags.h \
- lzma/subblock.h \
- lzma/version.h \
- lzma/vli.h
diff --git a/Build/source/utils/xz-4.999.8beta/src/liblzma/api/lzma/version.h b/Build/source/utils/xz-4.999.8beta/src/liblzma/api/lzma/version.h
deleted file mode 100644
index 90d064a66f9..00000000000
--- a/Build/source/utils/xz-4.999.8beta/src/liblzma/api/lzma/version.h
+++ /dev/null
@@ -1,59 +0,0 @@
-/**
- * \file lzma/version.h
- * \brief Version number
- *
- * \author Copyright (C) 1999-2006 Igor Pavlov
- * \author Copyright (C) 2007 Lasse Collin
- *
- * This library is free software; you can redistribute it and/or
- * modify it under the terms of the GNU Lesser General Public
- * License as published by the Free Software Foundation; either
- * version 2.1 of the License, or (at your option) any later version.
- *
- * This library is distributed in the hope that it will be useful,
- * but WITHOUT ANY WARRANTY; without even the implied warranty of
- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the GNU
- * Lesser General Public License for more details.
- */
-
-#ifndef LZMA_H_INTERNAL
-# error Never include this file directly. Use <lzma.h> instead.
-#endif
-
-
-/**
- * \brief Compile-time version number
- *
- * The version number is of format xyyyzzzs where
- * - x = major
- * - yyy = minor
- * - zzz = revision
- * - s indicates stability: 0 = alpha, 1 = beta, 2 = stable
- *
- * The same xyyyzzz triplet is never reused with different stability levels.
- * For example, if 5.1.0alpha has been released, there will never be 5.1.0beta
- * or 5.1.0 stable.
- *
- * \note The version number of liblzma has nothing to with
- * the version number of Igor Pavlov's LZMA SDK.
- */
-#define LZMA_VERSION UINT32_C(49990081)
-
-
-/**
- * \brief liblzma version number as an integer
- *
- * Returns the value of LZMA_VERSION macro at the compile time of liblzma.
- * This allows the application to compare if it was built against the same,
- * older, or newer version of liblzma that is currently running.
- */
-extern LZMA_API(uint32_t) lzma_version_number(void) lzma_attr_const;
-
-
-/**
- * \brief Version number of liblzma as a string
- *
- * This function may be useful if you want to display which version of
- * liblzma your application is currently using.
- */
-extern LZMA_API(const char *) lzma_version_string(void) lzma_attr_const;
diff --git a/Build/source/utils/xz-4.999.8beta/src/liblzma/check/Makefile.am b/Build/source/utils/xz-4.999.8beta/src/liblzma/check/Makefile.am
deleted file mode 100644
index f323e6fe1ae..00000000000
--- a/Build/source/utils/xz-4.999.8beta/src/liblzma/check/Makefile.am
+++ /dev/null
@@ -1,54 +0,0 @@
-##
-## This code has been put into the public domain.
-##
-## This library is distributed in the hope that it will be useful,
-## but WITHOUT ANY WARRANTY; without even the implied warranty of
-## MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the GNU
-## Lesser General Public License for more details.
-##
-
-EXTRA_DIST = crc32_tablegen.c crc64_tablegen.c
-
-noinst_LTLIBRARIES = libcheck.la
-libcheck_la_SOURCES = \
- check.c \
- check.h \
- crc_macros.h
-libcheck_la_CPPFLAGS = \
- -I@top_srcdir@/src/liblzma/api \
- -I@top_srcdir@/src/liblzma/common
-
-if COND_CHECK_CRC32
-if COND_SMALL
-libcheck_la_SOURCES += crc32_small.c
-else
-libcheck_la_SOURCES += crc32_table.c crc32_table_le.h crc32_table_be.h
-if COND_ASM_X86
-libcheck_la_SOURCES += crc32_x86.S
-else
-libcheck_la_SOURCES += crc32_fast.c
-endif
-endif
-endif
-
-if COND_CHECK_CRC64
-if COND_SMALL
-libcheck_la_SOURCES += crc64_small.c
-else
-libcheck_la_SOURCES += crc64_table.c crc64_table_le.h crc64_table_be.h
-if COND_ASM_X86
-libcheck_la_SOURCES += crc64_x86.S
-else
-libcheck_la_SOURCES += crc64_fast.c
-endif
-endif
-endif
-
-if COND_CHECK_SHA256
-libcheck_la_SOURCES += sha256.c
-# Hide bogus warning to allow usage of -Werror. If more issues like this
-# pop up, we'll drop -Werror.
-if COND_WNO_UNINITIALIZED
-CFLAGS += -Wno-uninitialized
-endif
-endif
diff --git a/Build/source/utils/xz-4.999.8beta/src/liblzma/check/Makefile.in b/Build/source/utils/xz-4.999.8beta/src/liblzma/check/Makefile.in
deleted file mode 100644
index 63a42ce368f..00000000000
--- a/Build/source/utils/xz-4.999.8beta/src/liblzma/check/Makefile.in
+++ /dev/null
@@ -1,605 +0,0 @@
-# Makefile.in generated by automake 1.10.2 from Makefile.am.
-# @configure_input@
-
-# Copyright (C) 1994, 1995, 1996, 1997, 1998, 1999, 2000, 2001, 2002,
-# 2003, 2004, 2005, 2006, 2007, 2008 Free Software Foundation, Inc.
-# This Makefile.in is free software; the Free Software Foundation
-# gives unlimited permission to copy and/or distribute it,
-# with or without modifications, as long as this notice is preserved.
-
-# This program is distributed in the hope that it will be useful,
-# but WITHOUT ANY WARRANTY, to the extent permitted by law; without
-# even the implied warranty of MERCHANTABILITY or FITNESS FOR A
-# PARTICULAR PURPOSE.
-
-@SET_MAKE@
-
-VPATH = @srcdir@
-pkgdatadir = $(datadir)/@PACKAGE@
-pkglibdir = $(libdir)/@PACKAGE@
-pkgincludedir = $(includedir)/@PACKAGE@
-am__cd = CDPATH="$${ZSH_VERSION+.}$(PATH_SEPARATOR)" && cd
-install_sh_DATA = $(install_sh) -c -m 644
-install_sh_PROGRAM = $(install_sh) -c
-install_sh_SCRIPT = $(install_sh) -c
-INSTALL_HEADER = $(INSTALL_DATA)
-transform = $(program_transform_name)
-NORMAL_INSTALL = :
-PRE_INSTALL = :
-POST_INSTALL = :
-NORMAL_UNINSTALL = :
-PRE_UNINSTALL = :
-POST_UNINSTALL = :
-build_triplet = @build@
-host_triplet = @host@
-@COND_CHECK_CRC32_TRUE@@COND_SMALL_TRUE@am__append_1 = crc32_small.c
-@COND_CHECK_CRC32_TRUE@@COND_SMALL_FALSE@am__append_2 = crc32_table.c crc32_table_le.h crc32_table_be.h
-@COND_ASM_X86_TRUE@@COND_CHECK_CRC32_TRUE@@COND_SMALL_FALSE@am__append_3 = crc32_x86.S
-@COND_ASM_X86_FALSE@@COND_CHECK_CRC32_TRUE@@COND_SMALL_FALSE@am__append_4 = crc32_fast.c
-@COND_CHECK_CRC64_TRUE@@COND_SMALL_TRUE@am__append_5 = crc64_small.c
-@COND_CHECK_CRC64_TRUE@@COND_SMALL_FALSE@am__append_6 = crc64_table.c crc64_table_le.h crc64_table_be.h
-@COND_ASM_X86_TRUE@@COND_CHECK_CRC64_TRUE@@COND_SMALL_FALSE@am__append_7 = crc64_x86.S
-@COND_ASM_X86_FALSE@@COND_CHECK_CRC64_TRUE@@COND_SMALL_FALSE@am__append_8 = crc64_fast.c
-@COND_CHECK_SHA256_TRUE@am__append_9 = sha256.c
-# Hide bogus warning to allow usage of -Werror. If more issues like this
-# pop up, we'll drop -Werror.
-@COND_CHECK_SHA256_TRUE@@COND_WNO_UNINITIALIZED_TRUE@am__append_10 = -Wno-uninitialized
-subdir = src/liblzma/check
-DIST_COMMON = $(srcdir)/Makefile.am $(srcdir)/Makefile.in
-ACLOCAL_M4 = $(top_srcdir)/aclocal.m4
-am__aclocal_m4_deps = $(top_srcdir)/m4/acx_pthread.m4 \
- $(top_srcdir)/m4/getopt.m4 $(top_srcdir)/m4/gettext.m4 \
- $(top_srcdir)/m4/iconv.m4 $(top_srcdir)/m4/lib-ld.m4 \
- $(top_srcdir)/m4/lib-link.m4 $(top_srcdir)/m4/lib-prefix.m4 \
- $(top_srcdir)/m4/nls.m4 $(top_srcdir)/m4/po.m4 \
- $(top_srcdir)/m4/progtest.m4 $(top_srcdir)/configure.ac
-am__configure_deps = $(am__aclocal_m4_deps) $(CONFIGURE_DEPENDENCIES) \
- $(ACLOCAL_M4)
-mkinstalldirs = $(install_sh) -d
-CONFIG_HEADER = $(top_builddir)/config.h
-CONFIG_CLEAN_FILES =
-LTLIBRARIES = $(noinst_LTLIBRARIES)
-libcheck_la_LIBADD =
-am__libcheck_la_SOURCES_DIST = check.c check.h crc_macros.h \
- crc32_small.c crc32_table.c crc32_table_le.h crc32_table_be.h \
- crc32_x86.S crc32_fast.c crc64_small.c crc64_table.c \
- crc64_table_le.h crc64_table_be.h crc64_x86.S crc64_fast.c \
- sha256.c
-@COND_CHECK_CRC32_TRUE@@COND_SMALL_TRUE@am__objects_1 = libcheck_la-crc32_small.lo
-@COND_CHECK_CRC32_TRUE@@COND_SMALL_FALSE@am__objects_2 = libcheck_la-crc32_table.lo
-@COND_ASM_X86_TRUE@@COND_CHECK_CRC32_TRUE@@COND_SMALL_FALSE@am__objects_3 = libcheck_la-crc32_x86.lo
-@COND_ASM_X86_FALSE@@COND_CHECK_CRC32_TRUE@@COND_SMALL_FALSE@am__objects_4 = libcheck_la-crc32_fast.lo
-@COND_CHECK_CRC64_TRUE@@COND_SMALL_TRUE@am__objects_5 = libcheck_la-crc64_small.lo
-@COND_CHECK_CRC64_TRUE@@COND_SMALL_FALSE@am__objects_6 = libcheck_la-crc64_table.lo
-@COND_ASM_X86_TRUE@@COND_CHECK_CRC64_TRUE@@COND_SMALL_FALSE@am__objects_7 = libcheck_la-crc64_x86.lo
-@COND_ASM_X86_FALSE@@COND_CHECK_CRC64_TRUE@@COND_SMALL_FALSE@am__objects_8 = libcheck_la-crc64_fast.lo
-@COND_CHECK_SHA256_TRUE@am__objects_9 = libcheck_la-sha256.lo
-am_libcheck_la_OBJECTS = libcheck_la-check.lo $(am__objects_1) \
- $(am__objects_2) $(am__objects_3) $(am__objects_4) \
- $(am__objects_5) $(am__objects_6) $(am__objects_7) \
- $(am__objects_8) $(am__objects_9)
-libcheck_la_OBJECTS = $(am_libcheck_la_OBJECTS)
-DEFAULT_INCLUDES = -I.@am__isrc@ -I$(top_builddir)
-depcomp = $(SHELL) $(top_srcdir)/depcomp
-am__depfiles_maybe = depfiles
-CPPASCOMPILE = $(CCAS) $(DEFS) $(DEFAULT_INCLUDES) $(INCLUDES) \
- $(AM_CPPFLAGS) $(CPPFLAGS) $(AM_CCASFLAGS) $(CCASFLAGS)
-LTCPPASCOMPILE = $(LIBTOOL) $(AM_LIBTOOLFLAGS) $(LIBTOOLFLAGS) \
- --mode=compile $(CCAS) $(DEFS) $(DEFAULT_INCLUDES) $(INCLUDES) \
- $(AM_CPPFLAGS) $(CPPFLAGS) $(AM_CCASFLAGS) $(CCASFLAGS)
-COMPILE = $(CC) $(DEFS) $(DEFAULT_INCLUDES) $(INCLUDES) $(AM_CPPFLAGS) \
- $(CPPFLAGS) $(AM_CFLAGS) $(CFLAGS)
-LTCOMPILE = $(LIBTOOL) --tag=CC $(AM_LIBTOOLFLAGS) $(LIBTOOLFLAGS) \
- --mode=compile $(CC) $(DEFS) $(DEFAULT_INCLUDES) $(INCLUDES) \
- $(AM_CPPFLAGS) $(CPPFLAGS) $(AM_CFLAGS) $(CFLAGS)
-CCLD = $(CC)
-LINK = $(LIBTOOL) --tag=CC $(AM_LIBTOOLFLAGS) $(LIBTOOLFLAGS) \
- --mode=link $(CCLD) $(AM_CFLAGS) $(CFLAGS) $(AM_LDFLAGS) \
- $(LDFLAGS) -o $@
-SOURCES = $(libcheck_la_SOURCES)
-DIST_SOURCES = $(am__libcheck_la_SOURCES_DIST)
-ETAGS = etags
-CTAGS = ctags
-DISTFILES = $(DIST_COMMON) $(DIST_SOURCES) $(TEXINFOS) $(EXTRA_DIST)
-ACLOCAL = @ACLOCAL@
-AMTAR = @AMTAR@
-AR = @AR@
-AUTOCONF = @AUTOCONF@
-AUTOHEADER = @AUTOHEADER@
-AUTOMAKE = @AUTOMAKE@
-AWK = @AWK@
-CC = @CC@
-CCAS = @CCAS@
-CCASDEPMODE = @CCASDEPMODE@
-CCASFLAGS = @CCASFLAGS@
-CCDEPMODE = @CCDEPMODE@
-CFLAGS = @CFLAGS@ $(am__append_10)
-CFLAG_VISIBILITY = @CFLAG_VISIBILITY@
-CPP = @CPP@
-CPPFLAGS = @CPPFLAGS@
-CXX = @CXX@
-CXXCPP = @CXXCPP@
-CXXDEPMODE = @CXXDEPMODE@
-CXXFLAGS = @CXXFLAGS@
-CYGPATH_W = @CYGPATH_W@
-DEFS = @DEFS@
-DEPDIR = @DEPDIR@
-DSYMUTIL = @DSYMUTIL@
-ECHO = @ECHO@
-ECHO_C = @ECHO_C@
-ECHO_N = @ECHO_N@
-ECHO_T = @ECHO_T@
-EGREP = @EGREP@
-EXEEXT = @EXEEXT@
-F77 = @F77@
-FFLAGS = @FFLAGS@
-GETOPT_H = @GETOPT_H@
-GMSGFMT = @GMSGFMT@
-GMSGFMT_015 = @GMSGFMT_015@
-GREP = @GREP@
-HAVE_VISIBILITY = @HAVE_VISIBILITY@
-INSTALL = @INSTALL@
-INSTALL_DATA = @INSTALL_DATA@
-INSTALL_PROGRAM = @INSTALL_PROGRAM@
-INSTALL_SCRIPT = @INSTALL_SCRIPT@
-INSTALL_STRIP_PROGRAM = @INSTALL_STRIP_PROGRAM@
-INTLLIBS = @INTLLIBS@
-INTL_MACOSX_LIBS = @INTL_MACOSX_LIBS@
-LDFLAGS = @LDFLAGS@
-LIBICONV = @LIBICONV@
-LIBINTL = @LIBINTL@
-LIBOBJS = @LIBOBJS@
-LIBS = @LIBS@
-LIBTOOL = @LIBTOOL@
-LN_S = @LN_S@
-LTLIBICONV = @LTLIBICONV@
-LTLIBINTL = @LTLIBINTL@
-LTLIBOBJS = @LTLIBOBJS@
-MAKEINFO = @MAKEINFO@
-MKDIR_P = @MKDIR_P@
-MSGFMT = @MSGFMT@
-MSGFMT_015 = @MSGFMT_015@
-MSGMERGE = @MSGMERGE@
-NMEDIT = @NMEDIT@
-OBJEXT = @OBJEXT@
-PACKAGE = @PACKAGE@
-PACKAGE_BUGREPORT = @PACKAGE_BUGREPORT@
-PACKAGE_NAME = @PACKAGE_NAME@
-PACKAGE_STRING = @PACKAGE_STRING@
-PACKAGE_TARNAME = @PACKAGE_TARNAME@
-PACKAGE_VERSION = @PACKAGE_VERSION@
-PATH_SEPARATOR = @PATH_SEPARATOR@
-POSUB = @POSUB@
-PTHREAD_CC = @PTHREAD_CC@
-PTHREAD_CFLAGS = @PTHREAD_CFLAGS@
-PTHREAD_LIBS = @PTHREAD_LIBS@
-RANLIB = @RANLIB@
-SED = @SED@
-SET_MAKE = @SET_MAKE@
-SHELL = @SHELL@
-STRIP = @STRIP@
-USE_NLS = @USE_NLS@
-VERSION = @VERSION@
-XGETTEXT = @XGETTEXT@
-XGETTEXT_015 = @XGETTEXT_015@
-abs_builddir = @abs_builddir@
-abs_srcdir = @abs_srcdir@
-abs_top_builddir = @abs_top_builddir@
-abs_top_srcdir = @abs_top_srcdir@
-ac_ct_CC = @ac_ct_CC@
-ac_ct_CXX = @ac_ct_CXX@
-ac_ct_F77 = @ac_ct_F77@
-acx_pthread_config = @acx_pthread_config@
-am__include = @am__include@
-am__leading_dot = @am__leading_dot@
-am__quote = @am__quote@
-am__tar = @am__tar@
-am__untar = @am__untar@
-bindir = @bindir@
-build = @build@
-build_alias = @build_alias@
-build_cpu = @build_cpu@
-build_os = @build_os@
-build_vendor = @build_vendor@
-builddir = @builddir@
-datadir = @datadir@
-datarootdir = @datarootdir@
-docdir = @docdir@
-dvidir = @dvidir@
-exec_prefix = @exec_prefix@
-host = @host@
-host_alias = @host_alias@
-host_cpu = @host_cpu@
-host_os = @host_os@
-host_vendor = @host_vendor@
-htmldir = @htmldir@
-includedir = @includedir@
-infodir = @infodir@
-install_sh = @install_sh@
-libdir = @libdir@
-libexecdir = @libexecdir@
-localedir = @localedir@
-localstatedir = @localstatedir@
-mandir = @mandir@
-mkdir_p = @mkdir_p@
-oldincludedir = @oldincludedir@
-pdfdir = @pdfdir@
-prefix = @prefix@
-program_transform_name = @program_transform_name@
-psdir = @psdir@
-sbindir = @sbindir@
-sharedstatedir = @sharedstatedir@
-srcdir = @srcdir@
-sysconfdir = @sysconfdir@
-target_alias = @target_alias@
-top_build_prefix = @top_build_prefix@
-top_builddir = @top_builddir@
-top_srcdir = @top_srcdir@
-EXTRA_DIST = crc32_tablegen.c crc64_tablegen.c
-noinst_LTLIBRARIES = libcheck.la
-libcheck_la_SOURCES = check.c check.h crc_macros.h $(am__append_1) \
- $(am__append_2) $(am__append_3) $(am__append_4) \
- $(am__append_5) $(am__append_6) $(am__append_7) \
- $(am__append_8) $(am__append_9)
-libcheck_la_CPPFLAGS = \
- -I@top_srcdir@/src/liblzma/api \
- -I@top_srcdir@/src/liblzma/common
-
-all: all-am
-
-.SUFFIXES:
-.SUFFIXES: .S .c .lo .o .obj
-$(srcdir)/Makefile.in: $(srcdir)/Makefile.am $(am__configure_deps)
- @for dep in $?; do \
- case '$(am__configure_deps)' in \
- *$$dep*) \
- ( cd $(top_builddir) && $(MAKE) $(AM_MAKEFLAGS) am--refresh ) \
- && { if test -f $@; then exit 0; else break; fi; }; \
- exit 1;; \
- esac; \
- done; \
- echo ' cd $(top_srcdir) && $(AUTOMAKE) --foreign src/liblzma/check/Makefile'; \
- cd $(top_srcdir) && \
- $(AUTOMAKE) --foreign src/liblzma/check/Makefile
-.PRECIOUS: Makefile
-Makefile: $(srcdir)/Makefile.in $(top_builddir)/config.status
- @case '$?' in \
- *config.status*) \
- cd $(top_builddir) && $(MAKE) $(AM_MAKEFLAGS) am--refresh;; \
- *) \
- echo ' cd $(top_builddir) && $(SHELL) ./config.status $(subdir)/$@ $(am__depfiles_maybe)'; \
- cd $(top_builddir) && $(SHELL) ./config.status $(subdir)/$@ $(am__depfiles_maybe);; \
- esac;
-
-$(top_builddir)/config.status: $(top_srcdir)/configure $(CONFIG_STATUS_DEPENDENCIES)
- cd $(top_builddir) && $(MAKE) $(AM_MAKEFLAGS) am--refresh
-
-$(top_srcdir)/configure: $(am__configure_deps)
- cd $(top_builddir) && $(MAKE) $(AM_MAKEFLAGS) am--refresh
-$(ACLOCAL_M4): $(am__aclocal_m4_deps)
- cd $(top_builddir) && $(MAKE) $(AM_MAKEFLAGS) am--refresh
-
-clean-noinstLTLIBRARIES:
- -test -z "$(noinst_LTLIBRARIES)" || rm -f $(noinst_LTLIBRARIES)
- @list='$(noinst_LTLIBRARIES)'; for p in $$list; do \
- dir="`echo $$p | sed -e 's|/[^/]*$$||'`"; \
- test "$$dir" != "$$p" || dir=.; \
- echo "rm -f \"$${dir}/so_locations\""; \
- rm -f "$${dir}/so_locations"; \
- done
-libcheck.la: $(libcheck_la_OBJECTS) $(libcheck_la_DEPENDENCIES)
- $(LINK) $(libcheck_la_OBJECTS) $(libcheck_la_LIBADD) $(LIBS)
-
-mostlyclean-compile:
- -rm -f *.$(OBJEXT)
-
-distclean-compile:
- -rm -f *.tab.c
-
-@AMDEP_TRUE@@am__include@ @am__quote@./$(DEPDIR)/libcheck_la-check.Plo@am__quote@
-@AMDEP_TRUE@@am__include@ @am__quote@./$(DEPDIR)/libcheck_la-crc32_fast.Plo@am__quote@
-@AMDEP_TRUE@@am__include@ @am__quote@./$(DEPDIR)/libcheck_la-crc32_small.Plo@am__quote@
-@AMDEP_TRUE@@am__include@ @am__quote@./$(DEPDIR)/libcheck_la-crc32_table.Plo@am__quote@
-@AMDEP_TRUE@@am__include@ @am__quote@./$(DEPDIR)/libcheck_la-crc32_x86.Plo@am__quote@
-@AMDEP_TRUE@@am__include@ @am__quote@./$(DEPDIR)/libcheck_la-crc64_fast.Plo@am__quote@
-@AMDEP_TRUE@@am__include@ @am__quote@./$(DEPDIR)/libcheck_la-crc64_small.Plo@am__quote@
-@AMDEP_TRUE@@am__include@ @am__quote@./$(DEPDIR)/libcheck_la-crc64_table.Plo@am__quote@
-@AMDEP_TRUE@@am__include@ @am__quote@./$(DEPDIR)/libcheck_la-crc64_x86.Plo@am__quote@
-@AMDEP_TRUE@@am__include@ @am__quote@./$(DEPDIR)/libcheck_la-sha256.Plo@am__quote@
-
-.S.o:
-@am__fastdepCCAS_TRUE@ $(CPPASCOMPILE) -MT $@ -MD -MP -MF $(DEPDIR)/$*.Tpo -c -o $@ $<
-@am__fastdepCCAS_TRUE@ mv -f $(DEPDIR)/$*.Tpo $(DEPDIR)/$*.Po
-@AMDEP_TRUE@@am__fastdepCCAS_FALSE@ source='$<' object='$@' libtool=no @AMDEPBACKSLASH@
-@AMDEP_TRUE@@am__fastdepCCAS_FALSE@ DEPDIR=$(DEPDIR) $(CCASDEPMODE) $(depcomp) @AMDEPBACKSLASH@
-@am__fastdepCCAS_FALSE@ $(CPPASCOMPILE) -c -o $@ $<
-
-.S.obj:
-@am__fastdepCCAS_TRUE@ $(CPPASCOMPILE) -MT $@ -MD -MP -MF $(DEPDIR)/$*.Tpo -c -o $@ `$(CYGPATH_W) '$<'`
-@am__fastdepCCAS_TRUE@ mv -f $(DEPDIR)/$*.Tpo $(DEPDIR)/$*.Po
-@AMDEP_TRUE@@am__fastdepCCAS_FALSE@ source='$<' object='$@' libtool=no @AMDEPBACKSLASH@
-@AMDEP_TRUE@@am__fastdepCCAS_FALSE@ DEPDIR=$(DEPDIR) $(CCASDEPMODE) $(depcomp) @AMDEPBACKSLASH@
-@am__fastdepCCAS_FALSE@ $(CPPASCOMPILE) -c -o $@ `$(CYGPATH_W) '$<'`
-
-.S.lo:
-@am__fastdepCCAS_TRUE@ $(LTCPPASCOMPILE) -MT $@ -MD -MP -MF $(DEPDIR)/$*.Tpo -c -o $@ $<
-@am__fastdepCCAS_TRUE@ mv -f $(DEPDIR)/$*.Tpo $(DEPDIR)/$*.Plo
-@AMDEP_TRUE@@am__fastdepCCAS_FALSE@ source='$<' object='$@' libtool=yes @AMDEPBACKSLASH@
-@AMDEP_TRUE@@am__fastdepCCAS_FALSE@ DEPDIR=$(DEPDIR) $(CCASDEPMODE) $(depcomp) @AMDEPBACKSLASH@
-@am__fastdepCCAS_FALSE@ $(LTCPPASCOMPILE) -c -o $@ $<
-
-libcheck_la-crc32_x86.lo: crc32_x86.S
-@am__fastdepCCAS_TRUE@ $(LIBTOOL) $(AM_LIBTOOLFLAGS) $(LIBTOOLFLAGS) --mode=compile $(CCAS) $(DEFS) $(DEFAULT_INCLUDES) $(INCLUDES) $(libcheck_la_CPPFLAGS) $(CPPFLAGS) $(AM_CCASFLAGS) $(CCASFLAGS) -MT libcheck_la-crc32_x86.lo -MD -MP -MF $(DEPDIR)/libcheck_la-crc32_x86.Tpo -c -o libcheck_la-crc32_x86.lo `test -f 'crc32_x86.S' || echo '$(srcdir)/'`crc32_x86.S
-@am__fastdepCCAS_TRUE@ mv -f $(DEPDIR)/libcheck_la-crc32_x86.Tpo $(DEPDIR)/libcheck_la-crc32_x86.Plo
-@AMDEP_TRUE@@am__fastdepCCAS_FALSE@ source='crc32_x86.S' object='libcheck_la-crc32_x86.lo' libtool=yes @AMDEPBACKSLASH@
-@AMDEP_TRUE@@am__fastdepCCAS_FALSE@ DEPDIR=$(DEPDIR) $(CCASDEPMODE) $(depcomp) @AMDEPBACKSLASH@
-@am__fastdepCCAS_FALSE@ $(LIBTOOL) $(AM_LIBTOOLFLAGS) $(LIBTOOLFLAGS) --mode=compile $(CCAS) $(DEFS) $(DEFAULT_INCLUDES) $(INCLUDES) $(libcheck_la_CPPFLAGS) $(CPPFLAGS) $(AM_CCASFLAGS) $(CCASFLAGS) -c -o libcheck_la-crc32_x86.lo `test -f 'crc32_x86.S' || echo '$(srcdir)/'`crc32_x86.S
-
-libcheck_la-crc64_x86.lo: crc64_x86.S
-@am__fastdepCCAS_TRUE@ $(LIBTOOL) $(AM_LIBTOOLFLAGS) $(LIBTOOLFLAGS) --mode=compile $(CCAS) $(DEFS) $(DEFAULT_INCLUDES) $(INCLUDES) $(libcheck_la_CPPFLAGS) $(CPPFLAGS) $(AM_CCASFLAGS) $(CCASFLAGS) -MT libcheck_la-crc64_x86.lo -MD -MP -MF $(DEPDIR)/libcheck_la-crc64_x86.Tpo -c -o libcheck_la-crc64_x86.lo `test -f 'crc64_x86.S' || echo '$(srcdir)/'`crc64_x86.S
-@am__fastdepCCAS_TRUE@ mv -f $(DEPDIR)/libcheck_la-crc64_x86.Tpo $(DEPDIR)/libcheck_la-crc64_x86.Plo
-@AMDEP_TRUE@@am__fastdepCCAS_FALSE@ source='crc64_x86.S' object='libcheck_la-crc64_x86.lo' libtool=yes @AMDEPBACKSLASH@
-@AMDEP_TRUE@@am__fastdepCCAS_FALSE@ DEPDIR=$(DEPDIR) $(CCASDEPMODE) $(depcomp) @AMDEPBACKSLASH@
-@am__fastdepCCAS_FALSE@ $(LIBTOOL) $(AM_LIBTOOLFLAGS) $(LIBTOOLFLAGS) --mode=compile $(CCAS) $(DEFS) $(DEFAULT_INCLUDES) $(INCLUDES) $(libcheck_la_CPPFLAGS) $(CPPFLAGS) $(AM_CCASFLAGS) $(CCASFLAGS) -c -o libcheck_la-crc64_x86.lo `test -f 'crc64_x86.S' || echo '$(srcdir)/'`crc64_x86.S
-
-.c.o:
-@am__fastdepCC_TRUE@ $(COMPILE) -MT $@ -MD -MP -MF $(DEPDIR)/$*.Tpo -c -o $@ $<
-@am__fastdepCC_TRUE@ mv -f $(DEPDIR)/$*.Tpo $(DEPDIR)/$*.Po
-@AMDEP_TRUE@@am__fastdepCC_FALSE@ source='$<' object='$@' libtool=no @AMDEPBACKSLASH@
-@AMDEP_TRUE@@am__fastdepCC_FALSE@ DEPDIR=$(DEPDIR) $(CCDEPMODE) $(depcomp) @AMDEPBACKSLASH@
-@am__fastdepCC_FALSE@ $(COMPILE) -c $<
-
-.c.obj:
-@am__fastdepCC_TRUE@ $(COMPILE) -MT $@ -MD -MP -MF $(DEPDIR)/$*.Tpo -c -o $@ `$(CYGPATH_W) '$<'`
-@am__fastdepCC_TRUE@ mv -f $(DEPDIR)/$*.Tpo $(DEPDIR)/$*.Po
-@AMDEP_TRUE@@am__fastdepCC_FALSE@ source='$<' object='$@' libtool=no @AMDEPBACKSLASH@
-@AMDEP_TRUE@@am__fastdepCC_FALSE@ DEPDIR=$(DEPDIR) $(CCDEPMODE) $(depcomp) @AMDEPBACKSLASH@
-@am__fastdepCC_FALSE@ $(COMPILE) -c `$(CYGPATH_W) '$<'`
-
-.c.lo:
-@am__fastdepCC_TRUE@ $(LTCOMPILE) -MT $@ -MD -MP -MF $(DEPDIR)/$*.Tpo -c -o $@ $<
-@am__fastdepCC_TRUE@ mv -f $(DEPDIR)/$*.Tpo $(DEPDIR)/$*.Plo
-@AMDEP_TRUE@@am__fastdepCC_FALSE@ source='$<' object='$@' libtool=yes @AMDEPBACKSLASH@
-@AMDEP_TRUE@@am__fastdepCC_FALSE@ DEPDIR=$(DEPDIR) $(CCDEPMODE) $(depcomp) @AMDEPBACKSLASH@
-@am__fastdepCC_FALSE@ $(LTCOMPILE) -c -o $@ $<
-
-libcheck_la-check.lo: check.c
-@am__fastdepCC_TRUE@ $(LIBTOOL) --tag=CC $(AM_LIBTOOLFLAGS) $(LIBTOOLFLAGS) --mode=compile $(CC) $(DEFS) $(DEFAULT_INCLUDES) $(INCLUDES) $(libcheck_la_CPPFLAGS) $(CPPFLAGS) $(AM_CFLAGS) $(CFLAGS) -MT libcheck_la-check.lo -MD -MP -MF $(DEPDIR)/libcheck_la-check.Tpo -c -o libcheck_la-check.lo `test -f 'check.c' || echo '$(srcdir)/'`check.c
-@am__fastdepCC_TRUE@ mv -f $(DEPDIR)/libcheck_la-check.Tpo $(DEPDIR)/libcheck_la-check.Plo
-@AMDEP_TRUE@@am__fastdepCC_FALSE@ source='check.c' object='libcheck_la-check.lo' libtool=yes @AMDEPBACKSLASH@
-@AMDEP_TRUE@@am__fastdepCC_FALSE@ DEPDIR=$(DEPDIR) $(CCDEPMODE) $(depcomp) @AMDEPBACKSLASH@
-@am__fastdepCC_FALSE@ $(LIBTOOL) --tag=CC $(AM_LIBTOOLFLAGS) $(LIBTOOLFLAGS) --mode=compile $(CC) $(DEFS) $(DEFAULT_INCLUDES) $(INCLUDES) $(libcheck_la_CPPFLAGS) $(CPPFLAGS) $(AM_CFLAGS) $(CFLAGS) -c -o libcheck_la-check.lo `test -f 'check.c' || echo '$(srcdir)/'`check.c
-
-libcheck_la-crc32_small.lo: crc32_small.c
-@am__fastdepCC_TRUE@ $(LIBTOOL) --tag=CC $(AM_LIBTOOLFLAGS) $(LIBTOOLFLAGS) --mode=compile $(CC) $(DEFS) $(DEFAULT_INCLUDES) $(INCLUDES) $(libcheck_la_CPPFLAGS) $(CPPFLAGS) $(AM_CFLAGS) $(CFLAGS) -MT libcheck_la-crc32_small.lo -MD -MP -MF $(DEPDIR)/libcheck_la-crc32_small.Tpo -c -o libcheck_la-crc32_small.lo `test -f 'crc32_small.c' || echo '$(srcdir)/'`crc32_small.c
-@am__fastdepCC_TRUE@ mv -f $(DEPDIR)/libcheck_la-crc32_small.Tpo $(DEPDIR)/libcheck_la-crc32_small.Plo
-@AMDEP_TRUE@@am__fastdepCC_FALSE@ source='crc32_small.c' object='libcheck_la-crc32_small.lo' libtool=yes @AMDEPBACKSLASH@
-@AMDEP_TRUE@@am__fastdepCC_FALSE@ DEPDIR=$(DEPDIR) $(CCDEPMODE) $(depcomp) @AMDEPBACKSLASH@
-@am__fastdepCC_FALSE@ $(LIBTOOL) --tag=CC $(AM_LIBTOOLFLAGS) $(LIBTOOLFLAGS) --mode=compile $(CC) $(DEFS) $(DEFAULT_INCLUDES) $(INCLUDES) $(libcheck_la_CPPFLAGS) $(CPPFLAGS) $(AM_CFLAGS) $(CFLAGS) -c -o libcheck_la-crc32_small.lo `test -f 'crc32_small.c' || echo '$(srcdir)/'`crc32_small.c
-
-libcheck_la-crc32_table.lo: crc32_table.c
-@am__fastdepCC_TRUE@ $(LIBTOOL) --tag=CC $(AM_LIBTOOLFLAGS) $(LIBTOOLFLAGS) --mode=compile $(CC) $(DEFS) $(DEFAULT_INCLUDES) $(INCLUDES) $(libcheck_la_CPPFLAGS) $(CPPFLAGS) $(AM_CFLAGS) $(CFLAGS) -MT libcheck_la-crc32_table.lo -MD -MP -MF $(DEPDIR)/libcheck_la-crc32_table.Tpo -c -o libcheck_la-crc32_table.lo `test -f 'crc32_table.c' || echo '$(srcdir)/'`crc32_table.c
-@am__fastdepCC_TRUE@ mv -f $(DEPDIR)/libcheck_la-crc32_table.Tpo $(DEPDIR)/libcheck_la-crc32_table.Plo
-@AMDEP_TRUE@@am__fastdepCC_FALSE@ source='crc32_table.c' object='libcheck_la-crc32_table.lo' libtool=yes @AMDEPBACKSLASH@
-@AMDEP_TRUE@@am__fastdepCC_FALSE@ DEPDIR=$(DEPDIR) $(CCDEPMODE) $(depcomp) @AMDEPBACKSLASH@
-@am__fastdepCC_FALSE@ $(LIBTOOL) --tag=CC $(AM_LIBTOOLFLAGS) $(LIBTOOLFLAGS) --mode=compile $(CC) $(DEFS) $(DEFAULT_INCLUDES) $(INCLUDES) $(libcheck_la_CPPFLAGS) $(CPPFLAGS) $(AM_CFLAGS) $(CFLAGS) -c -o libcheck_la-crc32_table.lo `test -f 'crc32_table.c' || echo '$(srcdir)/'`crc32_table.c
-
-libcheck_la-crc32_fast.lo: crc32_fast.c
-@am__fastdepCC_TRUE@ $(LIBTOOL) --tag=CC $(AM_LIBTOOLFLAGS) $(LIBTOOLFLAGS) --mode=compile $(CC) $(DEFS) $(DEFAULT_INCLUDES) $(INCLUDES) $(libcheck_la_CPPFLAGS) $(CPPFLAGS) $(AM_CFLAGS) $(CFLAGS) -MT libcheck_la-crc32_fast.lo -MD -MP -MF $(DEPDIR)/libcheck_la-crc32_fast.Tpo -c -o libcheck_la-crc32_fast.lo `test -f 'crc32_fast.c' || echo '$(srcdir)/'`crc32_fast.c
-@am__fastdepCC_TRUE@ mv -f $(DEPDIR)/libcheck_la-crc32_fast.Tpo $(DEPDIR)/libcheck_la-crc32_fast.Plo
-@AMDEP_TRUE@@am__fastdepCC_FALSE@ source='crc32_fast.c' object='libcheck_la-crc32_fast.lo' libtool=yes @AMDEPBACKSLASH@
-@AMDEP_TRUE@@am__fastdepCC_FALSE@ DEPDIR=$(DEPDIR) $(CCDEPMODE) $(depcomp) @AMDEPBACKSLASH@
-@am__fastdepCC_FALSE@ $(LIBTOOL) --tag=CC $(AM_LIBTOOLFLAGS) $(LIBTOOLFLAGS) --mode=compile $(CC) $(DEFS) $(DEFAULT_INCLUDES) $(INCLUDES) $(libcheck_la_CPPFLAGS) $(CPPFLAGS) $(AM_CFLAGS) $(CFLAGS) -c -o libcheck_la-crc32_fast.lo `test -f 'crc32_fast.c' || echo '$(srcdir)/'`crc32_fast.c
-
-libcheck_la-crc64_small.lo: crc64_small.c
-@am__fastdepCC_TRUE@ $(LIBTOOL) --tag=CC $(AM_LIBTOOLFLAGS) $(LIBTOOLFLAGS) --mode=compile $(CC) $(DEFS) $(DEFAULT_INCLUDES) $(INCLUDES) $(libcheck_la_CPPFLAGS) $(CPPFLAGS) $(AM_CFLAGS) $(CFLAGS) -MT libcheck_la-crc64_small.lo -MD -MP -MF $(DEPDIR)/libcheck_la-crc64_small.Tpo -c -o libcheck_la-crc64_small.lo `test -f 'crc64_small.c' || echo '$(srcdir)/'`crc64_small.c
-@am__fastdepCC_TRUE@ mv -f $(DEPDIR)/libcheck_la-crc64_small.Tpo $(DEPDIR)/libcheck_la-crc64_small.Plo
-@AMDEP_TRUE@@am__fastdepCC_FALSE@ source='crc64_small.c' object='libcheck_la-crc64_small.lo' libtool=yes @AMDEPBACKSLASH@
-@AMDEP_TRUE@@am__fastdepCC_FALSE@ DEPDIR=$(DEPDIR) $(CCDEPMODE) $(depcomp) @AMDEPBACKSLASH@
-@am__fastdepCC_FALSE@ $(LIBTOOL) --tag=CC $(AM_LIBTOOLFLAGS) $(LIBTOOLFLAGS) --mode=compile $(CC) $(DEFS) $(DEFAULT_INCLUDES) $(INCLUDES) $(libcheck_la_CPPFLAGS) $(CPPFLAGS) $(AM_CFLAGS) $(CFLAGS) -c -o libcheck_la-crc64_small.lo `test -f 'crc64_small.c' || echo '$(srcdir)/'`crc64_small.c
-
-libcheck_la-crc64_table.lo: crc64_table.c
-@am__fastdepCC_TRUE@ $(LIBTOOL) --tag=CC $(AM_LIBTOOLFLAGS) $(LIBTOOLFLAGS) --mode=compile $(CC) $(DEFS) $(DEFAULT_INCLUDES) $(INCLUDES) $(libcheck_la_CPPFLAGS) $(CPPFLAGS) $(AM_CFLAGS) $(CFLAGS) -MT libcheck_la-crc64_table.lo -MD -MP -MF $(DEPDIR)/libcheck_la-crc64_table.Tpo -c -o libcheck_la-crc64_table.lo `test -f 'crc64_table.c' || echo '$(srcdir)/'`crc64_table.c
-@am__fastdepCC_TRUE@ mv -f $(DEPDIR)/libcheck_la-crc64_table.Tpo $(DEPDIR)/libcheck_la-crc64_table.Plo
-@AMDEP_TRUE@@am__fastdepCC_FALSE@ source='crc64_table.c' object='libcheck_la-crc64_table.lo' libtool=yes @AMDEPBACKSLASH@
-@AMDEP_TRUE@@am__fastdepCC_FALSE@ DEPDIR=$(DEPDIR) $(CCDEPMODE) $(depcomp) @AMDEPBACKSLASH@
-@am__fastdepCC_FALSE@ $(LIBTOOL) --tag=CC $(AM_LIBTOOLFLAGS) $(LIBTOOLFLAGS) --mode=compile $(CC) $(DEFS) $(DEFAULT_INCLUDES) $(INCLUDES) $(libcheck_la_CPPFLAGS) $(CPPFLAGS) $(AM_CFLAGS) $(CFLAGS) -c -o libcheck_la-crc64_table.lo `test -f 'crc64_table.c' || echo '$(srcdir)/'`crc64_table.c
-
-libcheck_la-crc64_fast.lo: crc64_fast.c
-@am__fastdepCC_TRUE@ $(LIBTOOL) --tag=CC $(AM_LIBTOOLFLAGS) $(LIBTOOLFLAGS) --mode=compile $(CC) $(DEFS) $(DEFAULT_INCLUDES) $(INCLUDES) $(libcheck_la_CPPFLAGS) $(CPPFLAGS) $(AM_CFLAGS) $(CFLAGS) -MT libcheck_la-crc64_fast.lo -MD -MP -MF $(DEPDIR)/libcheck_la-crc64_fast.Tpo -c -o libcheck_la-crc64_fast.lo `test -f 'crc64_fast.c' || echo '$(srcdir)/'`crc64_fast.c
-@am__fastdepCC_TRUE@ mv -f $(DEPDIR)/libcheck_la-crc64_fast.Tpo $(DEPDIR)/libcheck_la-crc64_fast.Plo
-@AMDEP_TRUE@@am__fastdepCC_FALSE@ source='crc64_fast.c' object='libcheck_la-crc64_fast.lo' libtool=yes @AMDEPBACKSLASH@
-@AMDEP_TRUE@@am__fastdepCC_FALSE@ DEPDIR=$(DEPDIR) $(CCDEPMODE) $(depcomp) @AMDEPBACKSLASH@
-@am__fastdepCC_FALSE@ $(LIBTOOL) --tag=CC $(AM_LIBTOOLFLAGS) $(LIBTOOLFLAGS) --mode=compile $(CC) $(DEFS) $(DEFAULT_INCLUDES) $(INCLUDES) $(libcheck_la_CPPFLAGS) $(CPPFLAGS) $(AM_CFLAGS) $(CFLAGS) -c -o libcheck_la-crc64_fast.lo `test -f 'crc64_fast.c' || echo '$(srcdir)/'`crc64_fast.c
-
-libcheck_la-sha256.lo: sha256.c
-@am__fastdepCC_TRUE@ $(LIBTOOL) --tag=CC $(AM_LIBTOOLFLAGS) $(LIBTOOLFLAGS) --mode=compile $(CC) $(DEFS) $(DEFAULT_INCLUDES) $(INCLUDES) $(libcheck_la_CPPFLAGS) $(CPPFLAGS) $(AM_CFLAGS) $(CFLAGS) -MT libcheck_la-sha256.lo -MD -MP -MF $(DEPDIR)/libcheck_la-sha256.Tpo -c -o libcheck_la-sha256.lo `test -f 'sha256.c' || echo '$(srcdir)/'`sha256.c
-@am__fastdepCC_TRUE@ mv -f $(DEPDIR)/libcheck_la-sha256.Tpo $(DEPDIR)/libcheck_la-sha256.Plo
-@AMDEP_TRUE@@am__fastdepCC_FALSE@ source='sha256.c' object='libcheck_la-sha256.lo' libtool=yes @AMDEPBACKSLASH@
-@AMDEP_TRUE@@am__fastdepCC_FALSE@ DEPDIR=$(DEPDIR) $(CCDEPMODE) $(depcomp) @AMDEPBACKSLASH@
-@am__fastdepCC_FALSE@ $(LIBTOOL) --tag=CC $(AM_LIBTOOLFLAGS) $(LIBTOOLFLAGS) --mode=compile $(CC) $(DEFS) $(DEFAULT_INCLUDES) $(INCLUDES) $(libcheck_la_CPPFLAGS) $(CPPFLAGS) $(AM_CFLAGS) $(CFLAGS) -c -o libcheck_la-sha256.lo `test -f 'sha256.c' || echo '$(srcdir)/'`sha256.c
-
-mostlyclean-libtool:
- -rm -f *.lo
-
-clean-libtool:
- -rm -rf .libs _libs
-
-ID: $(HEADERS) $(SOURCES) $(LISP) $(TAGS_FILES)
- list='$(SOURCES) $(HEADERS) $(LISP) $(TAGS_FILES)'; \
- unique=`for i in $$list; do \
- if test -f "$$i"; then echo $$i; else echo $(srcdir)/$$i; fi; \
- done | \
- $(AWK) '{ files[$$0] = 1; nonempty = 1; } \
- END { if (nonempty) { for (i in files) print i; }; }'`; \
- mkid -fID $$unique
-tags: TAGS
-
-TAGS: $(HEADERS) $(SOURCES) $(TAGS_DEPENDENCIES) \
- $(TAGS_FILES) $(LISP)
- tags=; \
- here=`pwd`; \
- list='$(SOURCES) $(HEADERS) $(LISP) $(TAGS_FILES)'; \
- unique=`for i in $$list; do \
- if test -f "$$i"; then echo $$i; else echo $(srcdir)/$$i; fi; \
- done | \
- $(AWK) '{ files[$$0] = 1; nonempty = 1; } \
- END { if (nonempty) { for (i in files) print i; }; }'`; \
- if test -z "$(ETAGS_ARGS)$$tags$$unique"; then :; else \
- test -n "$$unique" || unique=$$empty_fix; \
- $(ETAGS) $(ETAGSFLAGS) $(AM_ETAGSFLAGS) $(ETAGS_ARGS) \
- $$tags $$unique; \
- fi
-ctags: CTAGS
-CTAGS: $(HEADERS) $(SOURCES) $(TAGS_DEPENDENCIES) \
- $(TAGS_FILES) $(LISP)
- tags=; \
- list='$(SOURCES) $(HEADERS) $(LISP) $(TAGS_FILES)'; \
- unique=`for i in $$list; do \
- if test -f "$$i"; then echo $$i; else echo $(srcdir)/$$i; fi; \
- done | \
- $(AWK) '{ files[$$0] = 1; nonempty = 1; } \
- END { if (nonempty) { for (i in files) print i; }; }'`; \
- test -z "$(CTAGS_ARGS)$$tags$$unique" \
- || $(CTAGS) $(CTAGSFLAGS) $(AM_CTAGSFLAGS) $(CTAGS_ARGS) \
- $$tags $$unique
-
-GTAGS:
- here=`$(am__cd) $(top_builddir) && pwd` \
- && cd $(top_srcdir) \
- && gtags -i $(GTAGS_ARGS) $$here
-
-distclean-tags:
- -rm -f TAGS ID GTAGS GRTAGS GSYMS GPATH tags
-
-distdir: $(DISTFILES)
- @srcdirstrip=`echo "$(srcdir)" | sed 's/[].[^$$\\*]/\\\\&/g'`; \
- topsrcdirstrip=`echo "$(top_srcdir)" | sed 's/[].[^$$\\*]/\\\\&/g'`; \
- list='$(DISTFILES)'; \
- dist_files=`for file in $$list; do echo $$file; done | \
- sed -e "s|^$$srcdirstrip/||;t" \
- -e "s|^$$topsrcdirstrip/|$(top_builddir)/|;t"`; \
- case $$dist_files in \
- */*) $(MKDIR_P) `echo "$$dist_files" | \
- sed '/\//!d;s|^|$(distdir)/|;s,/[^/]*$$,,' | \
- sort -u` ;; \
- esac; \
- for file in $$dist_files; do \
- if test -f $$file || test -d $$file; then d=.; else d=$(srcdir); fi; \
- if test -d $$d/$$file; then \
- dir=`echo "/$$file" | sed -e 's,/[^/]*$$,,'`; \
- if test -d $(srcdir)/$$file && test $$d != $(srcdir); then \
- cp -pR $(srcdir)/$$file $(distdir)$$dir || exit 1; \
- fi; \
- cp -pR $$d/$$file $(distdir)$$dir || exit 1; \
- else \
- test -f $(distdir)/$$file \
- || cp -p $$d/$$file $(distdir)/$$file \
- || exit 1; \
- fi; \
- done
-check-am: all-am
-check: check-am
-all-am: Makefile $(LTLIBRARIES)
-installdirs:
-install: install-am
-install-exec: install-exec-am
-install-data: install-data-am
-uninstall: uninstall-am
-
-install-am: all-am
- @$(MAKE) $(AM_MAKEFLAGS) install-exec-am install-data-am
-
-installcheck: installcheck-am
-install-strip:
- $(MAKE) $(AM_MAKEFLAGS) INSTALL_PROGRAM="$(INSTALL_STRIP_PROGRAM)" \
- install_sh_PROGRAM="$(INSTALL_STRIP_PROGRAM)" INSTALL_STRIP_FLAG=-s \
- `test -z '$(STRIP)' || \
- echo "INSTALL_PROGRAM_ENV=STRIPPROG='$(STRIP)'"` install
-mostlyclean-generic:
-
-clean-generic:
-
-distclean-generic:
- -test -z "$(CONFIG_CLEAN_FILES)" || rm -f $(CONFIG_CLEAN_FILES)
-
-maintainer-clean-generic:
- @echo "This command is intended for maintainers to use"
- @echo "it deletes files that may require special tools to rebuild."
-clean: clean-am
-
-clean-am: clean-generic clean-libtool clean-noinstLTLIBRARIES \
- mostlyclean-am
-
-distclean: distclean-am
- -rm -rf ./$(DEPDIR)
- -rm -f Makefile
-distclean-am: clean-am distclean-compile distclean-generic \
- distclean-tags
-
-dvi: dvi-am
-
-dvi-am:
-
-html: html-am
-
-info: info-am
-
-info-am:
-
-install-data-am:
-
-install-dvi: install-dvi-am
-
-install-exec-am:
-
-install-html: install-html-am
-
-install-info: install-info-am
-
-install-man:
-
-install-pdf: install-pdf-am
-
-install-ps: install-ps-am
-
-installcheck-am:
-
-maintainer-clean: maintainer-clean-am
- -rm -rf ./$(DEPDIR)
- -rm -f Makefile
-maintainer-clean-am: distclean-am maintainer-clean-generic
-
-mostlyclean: mostlyclean-am
-
-mostlyclean-am: mostlyclean-compile mostlyclean-generic \
- mostlyclean-libtool
-
-pdf: pdf-am
-
-pdf-am:
-
-ps: ps-am
-
-ps-am:
-
-uninstall-am:
-
-.MAKE: install-am install-strip
-
-.PHONY: CTAGS GTAGS all all-am check check-am clean clean-generic \
- clean-libtool clean-noinstLTLIBRARIES ctags distclean \
- distclean-compile distclean-generic distclean-libtool \
- distclean-tags distdir dvi dvi-am html html-am info info-am \
- install install-am install-data install-data-am install-dvi \
- install-dvi-am install-exec install-exec-am install-html \
- install-html-am install-info install-info-am install-man \
- install-pdf install-pdf-am install-ps install-ps-am \
- install-strip installcheck installcheck-am installdirs \
- maintainer-clean maintainer-clean-generic mostlyclean \
- mostlyclean-compile mostlyclean-generic mostlyclean-libtool \
- pdf pdf-am ps ps-am tags uninstall uninstall-am
-
-# Tell versions [3.59,3.63) of GNU make to not export all variables.
-# Otherwise a system limit (for SysV at least) may be exceeded.
-.NOEXPORT:
diff --git a/Build/source/utils/xz-4.999.8beta/src/liblzma/common/Makefile.am b/Build/source/utils/xz-4.999.8beta/src/liblzma/common/Makefile.am
deleted file mode 100644
index 3cb5a653f6a..00000000000
--- a/Build/source/utils/xz-4.999.8beta/src/liblzma/common/Makefile.am
+++ /dev/null
@@ -1,80 +0,0 @@
-##
-## Copyright (C) 2007 Lasse Collin
-##
-## This library is free software; you can redistribute it and/or
-## modify it under the terms of the GNU Lesser General Public
-## License as published by the Free Software Foundation; either
-## version 2.1 of the License, or (at your option) any later version.
-##
-## This library is distributed in the hope that it will be useful,
-## but WITHOUT ANY WARRANTY; without even the implied warranty of
-## MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the GNU
-## Lesser General Public License for more details.
-##
-
-noinst_LTLIBRARIES = libcommon.la
-libcommon_la_CPPFLAGS = \
- -I@top_srcdir@/src/liblzma/api \
- -I@top_srcdir@/src/liblzma/check \
- -I@top_srcdir@/src/liblzma/rangecoder \
- -I@top_srcdir@/src/liblzma/lz \
- -I@top_srcdir@/src/liblzma/lzma \
- -I@top_srcdir@/src/liblzma/subblock \
- -I@top_srcdir@/src/liblzma/delta \
- -I@top_srcdir@/src/liblzma/simple
-
-libcommon_la_SOURCES = \
- common.c \
- common.h \
- bsr.h \
- block_util.c \
- filter_common.c \
- filter_common.h \
- index.c \
- index.h \
- stream_flags_common.c \
- stream_flags_common.h \
- vli_size.c
-
-if COND_MAIN_ENCODER
-libcommon_la_SOURCES += \
- alone_encoder.c \
- block_buffer_encoder.c \
- block_encoder.c \
- block_encoder.h \
- block_header_encoder.c \
- easy.c \
- filter_buffer_encoder.c \
- filter_encoder.c \
- filter_encoder.h \
- filter_flags_encoder.c \
- index_encoder.c \
- index_encoder.h \
- stream_buffer_encoder.c \
- stream_encoder.c \
- stream_encoder.h \
- stream_flags_encoder.c \
- vli_encoder.c
-endif
-
-if COND_MAIN_DECODER
-libcommon_la_SOURCES += \
- alone_decoder.c \
- alone_decoder.h \
- auto_decoder.c \
- block_buffer_decoder.c \
- block_decoder.c \
- block_decoder.h \
- block_header_decoder.c \
- filter_buffer_decoder.c \
- filter_decoder.c \
- filter_decoder.h \
- filter_flags_decoder.c \
- index_decoder.c \
- index_hash.c \
- stream_buffer_decoder.c \
- stream_decoder.c \
- stream_decoder.h \
- stream_flags_decoder.c \
- vli_decoder.c
-endif
diff --git a/Build/source/utils/xz-4.999.8beta/src/liblzma/common/Makefile.in b/Build/source/utils/xz-4.999.8beta/src/liblzma/common/Makefile.in
deleted file mode 100644
index 5c47276d462..00000000000
--- a/Build/source/utils/xz-4.999.8beta/src/liblzma/common/Makefile.in
+++ /dev/null
@@ -1,823 +0,0 @@
-# Makefile.in generated by automake 1.10.2 from Makefile.am.
-# @configure_input@
-
-# Copyright (C) 1994, 1995, 1996, 1997, 1998, 1999, 2000, 2001, 2002,
-# 2003, 2004, 2005, 2006, 2007, 2008 Free Software Foundation, Inc.
-# This Makefile.in is free software; the Free Software Foundation
-# gives unlimited permission to copy and/or distribute it,
-# with or without modifications, as long as this notice is preserved.
-
-# This program is distributed in the hope that it will be useful,
-# but WITHOUT ANY WARRANTY, to the extent permitted by law; without
-# even the implied warranty of MERCHANTABILITY or FITNESS FOR A
-# PARTICULAR PURPOSE.
-
-@SET_MAKE@
-
-VPATH = @srcdir@
-pkgdatadir = $(datadir)/@PACKAGE@
-pkglibdir = $(libdir)/@PACKAGE@
-pkgincludedir = $(includedir)/@PACKAGE@
-am__cd = CDPATH="$${ZSH_VERSION+.}$(PATH_SEPARATOR)" && cd
-install_sh_DATA = $(install_sh) -c -m 644
-install_sh_PROGRAM = $(install_sh) -c
-install_sh_SCRIPT = $(install_sh) -c
-INSTALL_HEADER = $(INSTALL_DATA)
-transform = $(program_transform_name)
-NORMAL_INSTALL = :
-PRE_INSTALL = :
-POST_INSTALL = :
-NORMAL_UNINSTALL = :
-PRE_UNINSTALL = :
-POST_UNINSTALL = :
-build_triplet = @build@
-host_triplet = @host@
-@COND_MAIN_ENCODER_TRUE@am__append_1 = \
-@COND_MAIN_ENCODER_TRUE@ alone_encoder.c \
-@COND_MAIN_ENCODER_TRUE@ block_buffer_encoder.c \
-@COND_MAIN_ENCODER_TRUE@ block_encoder.c \
-@COND_MAIN_ENCODER_TRUE@ block_encoder.h \
-@COND_MAIN_ENCODER_TRUE@ block_header_encoder.c \
-@COND_MAIN_ENCODER_TRUE@ easy.c \
-@COND_MAIN_ENCODER_TRUE@ filter_buffer_encoder.c \
-@COND_MAIN_ENCODER_TRUE@ filter_encoder.c \
-@COND_MAIN_ENCODER_TRUE@ filter_encoder.h \
-@COND_MAIN_ENCODER_TRUE@ filter_flags_encoder.c \
-@COND_MAIN_ENCODER_TRUE@ index_encoder.c \
-@COND_MAIN_ENCODER_TRUE@ index_encoder.h \
-@COND_MAIN_ENCODER_TRUE@ stream_buffer_encoder.c \
-@COND_MAIN_ENCODER_TRUE@ stream_encoder.c \
-@COND_MAIN_ENCODER_TRUE@ stream_encoder.h \
-@COND_MAIN_ENCODER_TRUE@ stream_flags_encoder.c \
-@COND_MAIN_ENCODER_TRUE@ vli_encoder.c
-
-@COND_MAIN_DECODER_TRUE@am__append_2 = \
-@COND_MAIN_DECODER_TRUE@ alone_decoder.c \
-@COND_MAIN_DECODER_TRUE@ alone_decoder.h \
-@COND_MAIN_DECODER_TRUE@ auto_decoder.c \
-@COND_MAIN_DECODER_TRUE@ block_buffer_decoder.c \
-@COND_MAIN_DECODER_TRUE@ block_decoder.c \
-@COND_MAIN_DECODER_TRUE@ block_decoder.h \
-@COND_MAIN_DECODER_TRUE@ block_header_decoder.c \
-@COND_MAIN_DECODER_TRUE@ filter_buffer_decoder.c \
-@COND_MAIN_DECODER_TRUE@ filter_decoder.c \
-@COND_MAIN_DECODER_TRUE@ filter_decoder.h \
-@COND_MAIN_DECODER_TRUE@ filter_flags_decoder.c \
-@COND_MAIN_DECODER_TRUE@ index_decoder.c \
-@COND_MAIN_DECODER_TRUE@ index_hash.c \
-@COND_MAIN_DECODER_TRUE@ stream_buffer_decoder.c \
-@COND_MAIN_DECODER_TRUE@ stream_decoder.c \
-@COND_MAIN_DECODER_TRUE@ stream_decoder.h \
-@COND_MAIN_DECODER_TRUE@ stream_flags_decoder.c \
-@COND_MAIN_DECODER_TRUE@ vli_decoder.c
-
-subdir = src/liblzma/common
-DIST_COMMON = $(srcdir)/Makefile.am $(srcdir)/Makefile.in
-ACLOCAL_M4 = $(top_srcdir)/aclocal.m4
-am__aclocal_m4_deps = $(top_srcdir)/m4/acx_pthread.m4 \
- $(top_srcdir)/m4/getopt.m4 $(top_srcdir)/m4/gettext.m4 \
- $(top_srcdir)/m4/iconv.m4 $(top_srcdir)/m4/lib-ld.m4 \
- $(top_srcdir)/m4/lib-link.m4 $(top_srcdir)/m4/lib-prefix.m4 \
- $(top_srcdir)/m4/nls.m4 $(top_srcdir)/m4/po.m4 \
- $(top_srcdir)/m4/progtest.m4 $(top_srcdir)/configure.ac
-am__configure_deps = $(am__aclocal_m4_deps) $(CONFIGURE_DEPENDENCIES) \
- $(ACLOCAL_M4)
-mkinstalldirs = $(install_sh) -d
-CONFIG_HEADER = $(top_builddir)/config.h
-CONFIG_CLEAN_FILES =
-LTLIBRARIES = $(noinst_LTLIBRARIES)
-libcommon_la_LIBADD =
-am__libcommon_la_SOURCES_DIST = common.c common.h bsr.h block_util.c \
- filter_common.c filter_common.h index.c index.h \
- stream_flags_common.c stream_flags_common.h vli_size.c \
- alone_encoder.c block_buffer_encoder.c block_encoder.c \
- block_encoder.h block_header_encoder.c easy.c \
- filter_buffer_encoder.c filter_encoder.c filter_encoder.h \
- filter_flags_encoder.c index_encoder.c index_encoder.h \
- stream_buffer_encoder.c stream_encoder.c stream_encoder.h \
- stream_flags_encoder.c vli_encoder.c alone_decoder.c \
- alone_decoder.h auto_decoder.c block_buffer_decoder.c \
- block_decoder.c block_decoder.h block_header_decoder.c \
- filter_buffer_decoder.c filter_decoder.c filter_decoder.h \
- filter_flags_decoder.c index_decoder.c index_hash.c \
- stream_buffer_decoder.c stream_decoder.c stream_decoder.h \
- stream_flags_decoder.c vli_decoder.c
-@COND_MAIN_ENCODER_TRUE@am__objects_1 = libcommon_la-alone_encoder.lo \
-@COND_MAIN_ENCODER_TRUE@ libcommon_la-block_buffer_encoder.lo \
-@COND_MAIN_ENCODER_TRUE@ libcommon_la-block_encoder.lo \
-@COND_MAIN_ENCODER_TRUE@ libcommon_la-block_header_encoder.lo \
-@COND_MAIN_ENCODER_TRUE@ libcommon_la-easy.lo \
-@COND_MAIN_ENCODER_TRUE@ libcommon_la-filter_buffer_encoder.lo \
-@COND_MAIN_ENCODER_TRUE@ libcommon_la-filter_encoder.lo \
-@COND_MAIN_ENCODER_TRUE@ libcommon_la-filter_flags_encoder.lo \
-@COND_MAIN_ENCODER_TRUE@ libcommon_la-index_encoder.lo \
-@COND_MAIN_ENCODER_TRUE@ libcommon_la-stream_buffer_encoder.lo \
-@COND_MAIN_ENCODER_TRUE@ libcommon_la-stream_encoder.lo \
-@COND_MAIN_ENCODER_TRUE@ libcommon_la-stream_flags_encoder.lo \
-@COND_MAIN_ENCODER_TRUE@ libcommon_la-vli_encoder.lo
-@COND_MAIN_DECODER_TRUE@am__objects_2 = libcommon_la-alone_decoder.lo \
-@COND_MAIN_DECODER_TRUE@ libcommon_la-auto_decoder.lo \
-@COND_MAIN_DECODER_TRUE@ libcommon_la-block_buffer_decoder.lo \
-@COND_MAIN_DECODER_TRUE@ libcommon_la-block_decoder.lo \
-@COND_MAIN_DECODER_TRUE@ libcommon_la-block_header_decoder.lo \
-@COND_MAIN_DECODER_TRUE@ libcommon_la-filter_buffer_decoder.lo \
-@COND_MAIN_DECODER_TRUE@ libcommon_la-filter_decoder.lo \
-@COND_MAIN_DECODER_TRUE@ libcommon_la-filter_flags_decoder.lo \
-@COND_MAIN_DECODER_TRUE@ libcommon_la-index_decoder.lo \
-@COND_MAIN_DECODER_TRUE@ libcommon_la-index_hash.lo \
-@COND_MAIN_DECODER_TRUE@ libcommon_la-stream_buffer_decoder.lo \
-@COND_MAIN_DECODER_TRUE@ libcommon_la-stream_decoder.lo \
-@COND_MAIN_DECODER_TRUE@ libcommon_la-stream_flags_decoder.lo \
-@COND_MAIN_DECODER_TRUE@ libcommon_la-vli_decoder.lo
-am_libcommon_la_OBJECTS = libcommon_la-common.lo \
- libcommon_la-block_util.lo libcommon_la-filter_common.lo \
- libcommon_la-index.lo libcommon_la-stream_flags_common.lo \
- libcommon_la-vli_size.lo $(am__objects_1) $(am__objects_2)
-libcommon_la_OBJECTS = $(am_libcommon_la_OBJECTS)
-DEFAULT_INCLUDES = -I.@am__isrc@ -I$(top_builddir)
-depcomp = $(SHELL) $(top_srcdir)/depcomp
-am__depfiles_maybe = depfiles
-COMPILE = $(CC) $(DEFS) $(DEFAULT_INCLUDES) $(INCLUDES) $(AM_CPPFLAGS) \
- $(CPPFLAGS) $(AM_CFLAGS) $(CFLAGS)
-LTCOMPILE = $(LIBTOOL) --tag=CC $(AM_LIBTOOLFLAGS) $(LIBTOOLFLAGS) \
- --mode=compile $(CC) $(DEFS) $(DEFAULT_INCLUDES) $(INCLUDES) \
- $(AM_CPPFLAGS) $(CPPFLAGS) $(AM_CFLAGS) $(CFLAGS)
-CCLD = $(CC)
-LINK = $(LIBTOOL) --tag=CC $(AM_LIBTOOLFLAGS) $(LIBTOOLFLAGS) \
- --mode=link $(CCLD) $(AM_CFLAGS) $(CFLAGS) $(AM_LDFLAGS) \
- $(LDFLAGS) -o $@
-SOURCES = $(libcommon_la_SOURCES)
-DIST_SOURCES = $(am__libcommon_la_SOURCES_DIST)
-ETAGS = etags
-CTAGS = ctags
-DISTFILES = $(DIST_COMMON) $(DIST_SOURCES) $(TEXINFOS) $(EXTRA_DIST)
-ACLOCAL = @ACLOCAL@
-AMTAR = @AMTAR@
-AR = @AR@
-AUTOCONF = @AUTOCONF@
-AUTOHEADER = @AUTOHEADER@
-AUTOMAKE = @AUTOMAKE@
-AWK = @AWK@
-CC = @CC@
-CCAS = @CCAS@
-CCASDEPMODE = @CCASDEPMODE@
-CCASFLAGS = @CCASFLAGS@
-CCDEPMODE = @CCDEPMODE@
-CFLAGS = @CFLAGS@
-CFLAG_VISIBILITY = @CFLAG_VISIBILITY@
-CPP = @CPP@
-CPPFLAGS = @CPPFLAGS@
-CXX = @CXX@
-CXXCPP = @CXXCPP@
-CXXDEPMODE = @CXXDEPMODE@
-CXXFLAGS = @CXXFLAGS@
-CYGPATH_W = @CYGPATH_W@
-DEFS = @DEFS@
-DEPDIR = @DEPDIR@
-DSYMUTIL = @DSYMUTIL@
-ECHO = @ECHO@
-ECHO_C = @ECHO_C@
-ECHO_N = @ECHO_N@
-ECHO_T = @ECHO_T@
-EGREP = @EGREP@
-EXEEXT = @EXEEXT@
-F77 = @F77@
-FFLAGS = @FFLAGS@
-GETOPT_H = @GETOPT_H@
-GMSGFMT = @GMSGFMT@
-GMSGFMT_015 = @GMSGFMT_015@
-GREP = @GREP@
-HAVE_VISIBILITY = @HAVE_VISIBILITY@
-INSTALL = @INSTALL@
-INSTALL_DATA = @INSTALL_DATA@
-INSTALL_PROGRAM = @INSTALL_PROGRAM@
-INSTALL_SCRIPT = @INSTALL_SCRIPT@
-INSTALL_STRIP_PROGRAM = @INSTALL_STRIP_PROGRAM@
-INTLLIBS = @INTLLIBS@
-INTL_MACOSX_LIBS = @INTL_MACOSX_LIBS@
-LDFLAGS = @LDFLAGS@
-LIBICONV = @LIBICONV@
-LIBINTL = @LIBINTL@
-LIBOBJS = @LIBOBJS@
-LIBS = @LIBS@
-LIBTOOL = @LIBTOOL@
-LN_S = @LN_S@
-LTLIBICONV = @LTLIBICONV@
-LTLIBINTL = @LTLIBINTL@
-LTLIBOBJS = @LTLIBOBJS@
-MAKEINFO = @MAKEINFO@
-MKDIR_P = @MKDIR_P@
-MSGFMT = @MSGFMT@
-MSGFMT_015 = @MSGFMT_015@
-MSGMERGE = @MSGMERGE@
-NMEDIT = @NMEDIT@
-OBJEXT = @OBJEXT@
-PACKAGE = @PACKAGE@
-PACKAGE_BUGREPORT = @PACKAGE_BUGREPORT@
-PACKAGE_NAME = @PACKAGE_NAME@
-PACKAGE_STRING = @PACKAGE_STRING@
-PACKAGE_TARNAME = @PACKAGE_TARNAME@
-PACKAGE_VERSION = @PACKAGE_VERSION@
-PATH_SEPARATOR = @PATH_SEPARATOR@
-POSUB = @POSUB@
-PTHREAD_CC = @PTHREAD_CC@
-PTHREAD_CFLAGS = @PTHREAD_CFLAGS@
-PTHREAD_LIBS = @PTHREAD_LIBS@
-RANLIB = @RANLIB@
-SED = @SED@
-SET_MAKE = @SET_MAKE@
-SHELL = @SHELL@
-STRIP = @STRIP@
-USE_NLS = @USE_NLS@
-VERSION = @VERSION@
-XGETTEXT = @XGETTEXT@
-XGETTEXT_015 = @XGETTEXT_015@
-abs_builddir = @abs_builddir@
-abs_srcdir = @abs_srcdir@
-abs_top_builddir = @abs_top_builddir@
-abs_top_srcdir = @abs_top_srcdir@
-ac_ct_CC = @ac_ct_CC@
-ac_ct_CXX = @ac_ct_CXX@
-ac_ct_F77 = @ac_ct_F77@
-acx_pthread_config = @acx_pthread_config@
-am__include = @am__include@
-am__leading_dot = @am__leading_dot@
-am__quote = @am__quote@
-am__tar = @am__tar@
-am__untar = @am__untar@
-bindir = @bindir@
-build = @build@
-build_alias = @build_alias@
-build_cpu = @build_cpu@
-build_os = @build_os@
-build_vendor = @build_vendor@
-builddir = @builddir@
-datadir = @datadir@
-datarootdir = @datarootdir@
-docdir = @docdir@
-dvidir = @dvidir@
-exec_prefix = @exec_prefix@
-host = @host@
-host_alias = @host_alias@
-host_cpu = @host_cpu@
-host_os = @host_os@
-host_vendor = @host_vendor@
-htmldir = @htmldir@
-includedir = @includedir@
-infodir = @infodir@
-install_sh = @install_sh@
-libdir = @libdir@
-libexecdir = @libexecdir@
-localedir = @localedir@
-localstatedir = @localstatedir@
-mandir = @mandir@
-mkdir_p = @mkdir_p@
-oldincludedir = @oldincludedir@
-pdfdir = @pdfdir@
-prefix = @prefix@
-program_transform_name = @program_transform_name@
-psdir = @psdir@
-sbindir = @sbindir@
-sharedstatedir = @sharedstatedir@
-srcdir = @srcdir@
-sysconfdir = @sysconfdir@
-target_alias = @target_alias@
-top_build_prefix = @top_build_prefix@
-top_builddir = @top_builddir@
-top_srcdir = @top_srcdir@
-noinst_LTLIBRARIES = libcommon.la
-libcommon_la_CPPFLAGS = \
- -I@top_srcdir@/src/liblzma/api \
- -I@top_srcdir@/src/liblzma/check \
- -I@top_srcdir@/src/liblzma/rangecoder \
- -I@top_srcdir@/src/liblzma/lz \
- -I@top_srcdir@/src/liblzma/lzma \
- -I@top_srcdir@/src/liblzma/subblock \
- -I@top_srcdir@/src/liblzma/delta \
- -I@top_srcdir@/src/liblzma/simple
-
-libcommon_la_SOURCES = common.c common.h bsr.h block_util.c \
- filter_common.c filter_common.h index.c index.h \
- stream_flags_common.c stream_flags_common.h vli_size.c \
- $(am__append_1) $(am__append_2)
-all: all-am
-
-.SUFFIXES:
-.SUFFIXES: .c .lo .o .obj
-$(srcdir)/Makefile.in: $(srcdir)/Makefile.am $(am__configure_deps)
- @for dep in $?; do \
- case '$(am__configure_deps)' in \
- *$$dep*) \
- ( cd $(top_builddir) && $(MAKE) $(AM_MAKEFLAGS) am--refresh ) \
- && { if test -f $@; then exit 0; else break; fi; }; \
- exit 1;; \
- esac; \
- done; \
- echo ' cd $(top_srcdir) && $(AUTOMAKE) --foreign src/liblzma/common/Makefile'; \
- cd $(top_srcdir) && \
- $(AUTOMAKE) --foreign src/liblzma/common/Makefile
-.PRECIOUS: Makefile
-Makefile: $(srcdir)/Makefile.in $(top_builddir)/config.status
- @case '$?' in \
- *config.status*) \
- cd $(top_builddir) && $(MAKE) $(AM_MAKEFLAGS) am--refresh;; \
- *) \
- echo ' cd $(top_builddir) && $(SHELL) ./config.status $(subdir)/$@ $(am__depfiles_maybe)'; \
- cd $(top_builddir) && $(SHELL) ./config.status $(subdir)/$@ $(am__depfiles_maybe);; \
- esac;
-
-$(top_builddir)/config.status: $(top_srcdir)/configure $(CONFIG_STATUS_DEPENDENCIES)
- cd $(top_builddir) && $(MAKE) $(AM_MAKEFLAGS) am--refresh
-
-$(top_srcdir)/configure: $(am__configure_deps)
- cd $(top_builddir) && $(MAKE) $(AM_MAKEFLAGS) am--refresh
-$(ACLOCAL_M4): $(am__aclocal_m4_deps)
- cd $(top_builddir) && $(MAKE) $(AM_MAKEFLAGS) am--refresh
-
-clean-noinstLTLIBRARIES:
- -test -z "$(noinst_LTLIBRARIES)" || rm -f $(noinst_LTLIBRARIES)
- @list='$(noinst_LTLIBRARIES)'; for p in $$list; do \
- dir="`echo $$p | sed -e 's|/[^/]*$$||'`"; \
- test "$$dir" != "$$p" || dir=.; \
- echo "rm -f \"$${dir}/so_locations\""; \
- rm -f "$${dir}/so_locations"; \
- done
-libcommon.la: $(libcommon_la_OBJECTS) $(libcommon_la_DEPENDENCIES)
- $(LINK) $(libcommon_la_OBJECTS) $(libcommon_la_LIBADD) $(LIBS)
-
-mostlyclean-compile:
- -rm -f *.$(OBJEXT)
-
-distclean-compile:
- -rm -f *.tab.c
-
-@AMDEP_TRUE@@am__include@ @am__quote@./$(DEPDIR)/libcommon_la-alone_decoder.Plo@am__quote@
-@AMDEP_TRUE@@am__include@ @am__quote@./$(DEPDIR)/libcommon_la-alone_encoder.Plo@am__quote@
-@AMDEP_TRUE@@am__include@ @am__quote@./$(DEPDIR)/libcommon_la-auto_decoder.Plo@am__quote@
-@AMDEP_TRUE@@am__include@ @am__quote@./$(DEPDIR)/libcommon_la-block_buffer_decoder.Plo@am__quote@
-@AMDEP_TRUE@@am__include@ @am__quote@./$(DEPDIR)/libcommon_la-block_buffer_encoder.Plo@am__quote@
-@AMDEP_TRUE@@am__include@ @am__quote@./$(DEPDIR)/libcommon_la-block_decoder.Plo@am__quote@
-@AMDEP_TRUE@@am__include@ @am__quote@./$(DEPDIR)/libcommon_la-block_encoder.Plo@am__quote@
-@AMDEP_TRUE@@am__include@ @am__quote@./$(DEPDIR)/libcommon_la-block_header_decoder.Plo@am__quote@
-@AMDEP_TRUE@@am__include@ @am__quote@./$(DEPDIR)/libcommon_la-block_header_encoder.Plo@am__quote@
-@AMDEP_TRUE@@am__include@ @am__quote@./$(DEPDIR)/libcommon_la-block_util.Plo@am__quote@
-@AMDEP_TRUE@@am__include@ @am__quote@./$(DEPDIR)/libcommon_la-common.Plo@am__quote@
-@AMDEP_TRUE@@am__include@ @am__quote@./$(DEPDIR)/libcommon_la-easy.Plo@am__quote@
-@AMDEP_TRUE@@am__include@ @am__quote@./$(DEPDIR)/libcommon_la-filter_buffer_decoder.Plo@am__quote@
-@AMDEP_TRUE@@am__include@ @am__quote@./$(DEPDIR)/libcommon_la-filter_buffer_encoder.Plo@am__quote@
-@AMDEP_TRUE@@am__include@ @am__quote@./$(DEPDIR)/libcommon_la-filter_common.Plo@am__quote@
-@AMDEP_TRUE@@am__include@ @am__quote@./$(DEPDIR)/libcommon_la-filter_decoder.Plo@am__quote@
-@AMDEP_TRUE@@am__include@ @am__quote@./$(DEPDIR)/libcommon_la-filter_encoder.Plo@am__quote@
-@AMDEP_TRUE@@am__include@ @am__quote@./$(DEPDIR)/libcommon_la-filter_flags_decoder.Plo@am__quote@
-@AMDEP_TRUE@@am__include@ @am__quote@./$(DEPDIR)/libcommon_la-filter_flags_encoder.Plo@am__quote@
-@AMDEP_TRUE@@am__include@ @am__quote@./$(DEPDIR)/libcommon_la-index.Plo@am__quote@
-@AMDEP_TRUE@@am__include@ @am__quote@./$(DEPDIR)/libcommon_la-index_decoder.Plo@am__quote@
-@AMDEP_TRUE@@am__include@ @am__quote@./$(DEPDIR)/libcommon_la-index_encoder.Plo@am__quote@
-@AMDEP_TRUE@@am__include@ @am__quote@./$(DEPDIR)/libcommon_la-index_hash.Plo@am__quote@
-@AMDEP_TRUE@@am__include@ @am__quote@./$(DEPDIR)/libcommon_la-stream_buffer_decoder.Plo@am__quote@
-@AMDEP_TRUE@@am__include@ @am__quote@./$(DEPDIR)/libcommon_la-stream_buffer_encoder.Plo@am__quote@
-@AMDEP_TRUE@@am__include@ @am__quote@./$(DEPDIR)/libcommon_la-stream_decoder.Plo@am__quote@
-@AMDEP_TRUE@@am__include@ @am__quote@./$(DEPDIR)/libcommon_la-stream_encoder.Plo@am__quote@
-@AMDEP_TRUE@@am__include@ @am__quote@./$(DEPDIR)/libcommon_la-stream_flags_common.Plo@am__quote@
-@AMDEP_TRUE@@am__include@ @am__quote@./$(DEPDIR)/libcommon_la-stream_flags_decoder.Plo@am__quote@
-@AMDEP_TRUE@@am__include@ @am__quote@./$(DEPDIR)/libcommon_la-stream_flags_encoder.Plo@am__quote@
-@AMDEP_TRUE@@am__include@ @am__quote@./$(DEPDIR)/libcommon_la-vli_decoder.Plo@am__quote@
-@AMDEP_TRUE@@am__include@ @am__quote@./$(DEPDIR)/libcommon_la-vli_encoder.Plo@am__quote@
-@AMDEP_TRUE@@am__include@ @am__quote@./$(DEPDIR)/libcommon_la-vli_size.Plo@am__quote@
-
-.c.o:
-@am__fastdepCC_TRUE@ $(COMPILE) -MT $@ -MD -MP -MF $(DEPDIR)/$*.Tpo -c -o $@ $<
-@am__fastdepCC_TRUE@ mv -f $(DEPDIR)/$*.Tpo $(DEPDIR)/$*.Po
-@AMDEP_TRUE@@am__fastdepCC_FALSE@ source='$<' object='$@' libtool=no @AMDEPBACKSLASH@
-@AMDEP_TRUE@@am__fastdepCC_FALSE@ DEPDIR=$(DEPDIR) $(CCDEPMODE) $(depcomp) @AMDEPBACKSLASH@
-@am__fastdepCC_FALSE@ $(COMPILE) -c $<
-
-.c.obj:
-@am__fastdepCC_TRUE@ $(COMPILE) -MT $@ -MD -MP -MF $(DEPDIR)/$*.Tpo -c -o $@ `$(CYGPATH_W) '$<'`
-@am__fastdepCC_TRUE@ mv -f $(DEPDIR)/$*.Tpo $(DEPDIR)/$*.Po
-@AMDEP_TRUE@@am__fastdepCC_FALSE@ source='$<' object='$@' libtool=no @AMDEPBACKSLASH@
-@AMDEP_TRUE@@am__fastdepCC_FALSE@ DEPDIR=$(DEPDIR) $(CCDEPMODE) $(depcomp) @AMDEPBACKSLASH@
-@am__fastdepCC_FALSE@ $(COMPILE) -c `$(CYGPATH_W) '$<'`
-
-.c.lo:
-@am__fastdepCC_TRUE@ $(LTCOMPILE) -MT $@ -MD -MP -MF $(DEPDIR)/$*.Tpo -c -o $@ $<
-@am__fastdepCC_TRUE@ mv -f $(DEPDIR)/$*.Tpo $(DEPDIR)/$*.Plo
-@AMDEP_TRUE@@am__fastdepCC_FALSE@ source='$<' object='$@' libtool=yes @AMDEPBACKSLASH@
-@AMDEP_TRUE@@am__fastdepCC_FALSE@ DEPDIR=$(DEPDIR) $(CCDEPMODE) $(depcomp) @AMDEPBACKSLASH@
-@am__fastdepCC_FALSE@ $(LTCOMPILE) -c -o $@ $<
-
-libcommon_la-common.lo: common.c
-@am__fastdepCC_TRUE@ $(LIBTOOL) --tag=CC $(AM_LIBTOOLFLAGS) $(LIBTOOLFLAGS) --mode=compile $(CC) $(DEFS) $(DEFAULT_INCLUDES) $(INCLUDES) $(libcommon_la_CPPFLAGS) $(CPPFLAGS) $(AM_CFLAGS) $(CFLAGS) -MT libcommon_la-common.lo -MD -MP -MF $(DEPDIR)/libcommon_la-common.Tpo -c -o libcommon_la-common.lo `test -f 'common.c' || echo '$(srcdir)/'`common.c
-@am__fastdepCC_TRUE@ mv -f $(DEPDIR)/libcommon_la-common.Tpo $(DEPDIR)/libcommon_la-common.Plo
-@AMDEP_TRUE@@am__fastdepCC_FALSE@ source='common.c' object='libcommon_la-common.lo' libtool=yes @AMDEPBACKSLASH@
-@AMDEP_TRUE@@am__fastdepCC_FALSE@ DEPDIR=$(DEPDIR) $(CCDEPMODE) $(depcomp) @AMDEPBACKSLASH@
-@am__fastdepCC_FALSE@ $(LIBTOOL) --tag=CC $(AM_LIBTOOLFLAGS) $(LIBTOOLFLAGS) --mode=compile $(CC) $(DEFS) $(DEFAULT_INCLUDES) $(INCLUDES) $(libcommon_la_CPPFLAGS) $(CPPFLAGS) $(AM_CFLAGS) $(CFLAGS) -c -o libcommon_la-common.lo `test -f 'common.c' || echo '$(srcdir)/'`common.c
-
-libcommon_la-block_util.lo: block_util.c
-@am__fastdepCC_TRUE@ $(LIBTOOL) --tag=CC $(AM_LIBTOOLFLAGS) $(LIBTOOLFLAGS) --mode=compile $(CC) $(DEFS) $(DEFAULT_INCLUDES) $(INCLUDES) $(libcommon_la_CPPFLAGS) $(CPPFLAGS) $(AM_CFLAGS) $(CFLAGS) -MT libcommon_la-block_util.lo -MD -MP -MF $(DEPDIR)/libcommon_la-block_util.Tpo -c -o libcommon_la-block_util.lo `test -f 'block_util.c' || echo '$(srcdir)/'`block_util.c
-@am__fastdepCC_TRUE@ mv -f $(DEPDIR)/libcommon_la-block_util.Tpo $(DEPDIR)/libcommon_la-block_util.Plo
-@AMDEP_TRUE@@am__fastdepCC_FALSE@ source='block_util.c' object='libcommon_la-block_util.lo' libtool=yes @AMDEPBACKSLASH@
-@AMDEP_TRUE@@am__fastdepCC_FALSE@ DEPDIR=$(DEPDIR) $(CCDEPMODE) $(depcomp) @AMDEPBACKSLASH@
-@am__fastdepCC_FALSE@ $(LIBTOOL) --tag=CC $(AM_LIBTOOLFLAGS) $(LIBTOOLFLAGS) --mode=compile $(CC) $(DEFS) $(DEFAULT_INCLUDES) $(INCLUDES) $(libcommon_la_CPPFLAGS) $(CPPFLAGS) $(AM_CFLAGS) $(CFLAGS) -c -o libcommon_la-block_util.lo `test -f 'block_util.c' || echo '$(srcdir)/'`block_util.c
-
-libcommon_la-filter_common.lo: filter_common.c
-@am__fastdepCC_TRUE@ $(LIBTOOL) --tag=CC $(AM_LIBTOOLFLAGS) $(LIBTOOLFLAGS) --mode=compile $(CC) $(DEFS) $(DEFAULT_INCLUDES) $(INCLUDES) $(libcommon_la_CPPFLAGS) $(CPPFLAGS) $(AM_CFLAGS) $(CFLAGS) -MT libcommon_la-filter_common.lo -MD -MP -MF $(DEPDIR)/libcommon_la-filter_common.Tpo -c -o libcommon_la-filter_common.lo `test -f 'filter_common.c' || echo '$(srcdir)/'`filter_common.c
-@am__fastdepCC_TRUE@ mv -f $(DEPDIR)/libcommon_la-filter_common.Tpo $(DEPDIR)/libcommon_la-filter_common.Plo
-@AMDEP_TRUE@@am__fastdepCC_FALSE@ source='filter_common.c' object='libcommon_la-filter_common.lo' libtool=yes @AMDEPBACKSLASH@
-@AMDEP_TRUE@@am__fastdepCC_FALSE@ DEPDIR=$(DEPDIR) $(CCDEPMODE) $(depcomp) @AMDEPBACKSLASH@
-@am__fastdepCC_FALSE@ $(LIBTOOL) --tag=CC $(AM_LIBTOOLFLAGS) $(LIBTOOLFLAGS) --mode=compile $(CC) $(DEFS) $(DEFAULT_INCLUDES) $(INCLUDES) $(libcommon_la_CPPFLAGS) $(CPPFLAGS) $(AM_CFLAGS) $(CFLAGS) -c -o libcommon_la-filter_common.lo `test -f 'filter_common.c' || echo '$(srcdir)/'`filter_common.c
-
-libcommon_la-index.lo: index.c
-@am__fastdepCC_TRUE@ $(LIBTOOL) --tag=CC $(AM_LIBTOOLFLAGS) $(LIBTOOLFLAGS) --mode=compile $(CC) $(DEFS) $(DEFAULT_INCLUDES) $(INCLUDES) $(libcommon_la_CPPFLAGS) $(CPPFLAGS) $(AM_CFLAGS) $(CFLAGS) -MT libcommon_la-index.lo -MD -MP -MF $(DEPDIR)/libcommon_la-index.Tpo -c -o libcommon_la-index.lo `test -f 'index.c' || echo '$(srcdir)/'`index.c
-@am__fastdepCC_TRUE@ mv -f $(DEPDIR)/libcommon_la-index.Tpo $(DEPDIR)/libcommon_la-index.Plo
-@AMDEP_TRUE@@am__fastdepCC_FALSE@ source='index.c' object='libcommon_la-index.lo' libtool=yes @AMDEPBACKSLASH@
-@AMDEP_TRUE@@am__fastdepCC_FALSE@ DEPDIR=$(DEPDIR) $(CCDEPMODE) $(depcomp) @AMDEPBACKSLASH@
-@am__fastdepCC_FALSE@ $(LIBTOOL) --tag=CC $(AM_LIBTOOLFLAGS) $(LIBTOOLFLAGS) --mode=compile $(CC) $(DEFS) $(DEFAULT_INCLUDES) $(INCLUDES) $(libcommon_la_CPPFLAGS) $(CPPFLAGS) $(AM_CFLAGS) $(CFLAGS) -c -o libcommon_la-index.lo `test -f 'index.c' || echo '$(srcdir)/'`index.c
-
-libcommon_la-stream_flags_common.lo: stream_flags_common.c
-@am__fastdepCC_TRUE@ $(LIBTOOL) --tag=CC $(AM_LIBTOOLFLAGS) $(LIBTOOLFLAGS) --mode=compile $(CC) $(DEFS) $(DEFAULT_INCLUDES) $(INCLUDES) $(libcommon_la_CPPFLAGS) $(CPPFLAGS) $(AM_CFLAGS) $(CFLAGS) -MT libcommon_la-stream_flags_common.lo -MD -MP -MF $(DEPDIR)/libcommon_la-stream_flags_common.Tpo -c -o libcommon_la-stream_flags_common.lo `test -f 'stream_flags_common.c' || echo '$(srcdir)/'`stream_flags_common.c
-@am__fastdepCC_TRUE@ mv -f $(DEPDIR)/libcommon_la-stream_flags_common.Tpo $(DEPDIR)/libcommon_la-stream_flags_common.Plo
-@AMDEP_TRUE@@am__fastdepCC_FALSE@ source='stream_flags_common.c' object='libcommon_la-stream_flags_common.lo' libtool=yes @AMDEPBACKSLASH@
-@AMDEP_TRUE@@am__fastdepCC_FALSE@ DEPDIR=$(DEPDIR) $(CCDEPMODE) $(depcomp) @AMDEPBACKSLASH@
-@am__fastdepCC_FALSE@ $(LIBTOOL) --tag=CC $(AM_LIBTOOLFLAGS) $(LIBTOOLFLAGS) --mode=compile $(CC) $(DEFS) $(DEFAULT_INCLUDES) $(INCLUDES) $(libcommon_la_CPPFLAGS) $(CPPFLAGS) $(AM_CFLAGS) $(CFLAGS) -c -o libcommon_la-stream_flags_common.lo `test -f 'stream_flags_common.c' || echo '$(srcdir)/'`stream_flags_common.c
-
-libcommon_la-vli_size.lo: vli_size.c
-@am__fastdepCC_TRUE@ $(LIBTOOL) --tag=CC $(AM_LIBTOOLFLAGS) $(LIBTOOLFLAGS) --mode=compile $(CC) $(DEFS) $(DEFAULT_INCLUDES) $(INCLUDES) $(libcommon_la_CPPFLAGS) $(CPPFLAGS) $(AM_CFLAGS) $(CFLAGS) -MT libcommon_la-vli_size.lo -MD -MP -MF $(DEPDIR)/libcommon_la-vli_size.Tpo -c -o libcommon_la-vli_size.lo `test -f 'vli_size.c' || echo '$(srcdir)/'`vli_size.c
-@am__fastdepCC_TRUE@ mv -f $(DEPDIR)/libcommon_la-vli_size.Tpo $(DEPDIR)/libcommon_la-vli_size.Plo
-@AMDEP_TRUE@@am__fastdepCC_FALSE@ source='vli_size.c' object='libcommon_la-vli_size.lo' libtool=yes @AMDEPBACKSLASH@
-@AMDEP_TRUE@@am__fastdepCC_FALSE@ DEPDIR=$(DEPDIR) $(CCDEPMODE) $(depcomp) @AMDEPBACKSLASH@
-@am__fastdepCC_FALSE@ $(LIBTOOL) --tag=CC $(AM_LIBTOOLFLAGS) $(LIBTOOLFLAGS) --mode=compile $(CC) $(DEFS) $(DEFAULT_INCLUDES) $(INCLUDES) $(libcommon_la_CPPFLAGS) $(CPPFLAGS) $(AM_CFLAGS) $(CFLAGS) -c -o libcommon_la-vli_size.lo `test -f 'vli_size.c' || echo '$(srcdir)/'`vli_size.c
-
-libcommon_la-alone_encoder.lo: alone_encoder.c
-@am__fastdepCC_TRUE@ $(LIBTOOL) --tag=CC $(AM_LIBTOOLFLAGS) $(LIBTOOLFLAGS) --mode=compile $(CC) $(DEFS) $(DEFAULT_INCLUDES) $(INCLUDES) $(libcommon_la_CPPFLAGS) $(CPPFLAGS) $(AM_CFLAGS) $(CFLAGS) -MT libcommon_la-alone_encoder.lo -MD -MP -MF $(DEPDIR)/libcommon_la-alone_encoder.Tpo -c -o libcommon_la-alone_encoder.lo `test -f 'alone_encoder.c' || echo '$(srcdir)/'`alone_encoder.c
-@am__fastdepCC_TRUE@ mv -f $(DEPDIR)/libcommon_la-alone_encoder.Tpo $(DEPDIR)/libcommon_la-alone_encoder.Plo
-@AMDEP_TRUE@@am__fastdepCC_FALSE@ source='alone_encoder.c' object='libcommon_la-alone_encoder.lo' libtool=yes @AMDEPBACKSLASH@
-@AMDEP_TRUE@@am__fastdepCC_FALSE@ DEPDIR=$(DEPDIR) $(CCDEPMODE) $(depcomp) @AMDEPBACKSLASH@
-@am__fastdepCC_FALSE@ $(LIBTOOL) --tag=CC $(AM_LIBTOOLFLAGS) $(LIBTOOLFLAGS) --mode=compile $(CC) $(DEFS) $(DEFAULT_INCLUDES) $(INCLUDES) $(libcommon_la_CPPFLAGS) $(CPPFLAGS) $(AM_CFLAGS) $(CFLAGS) -c -o libcommon_la-alone_encoder.lo `test -f 'alone_encoder.c' || echo '$(srcdir)/'`alone_encoder.c
-
-libcommon_la-block_buffer_encoder.lo: block_buffer_encoder.c
-@am__fastdepCC_TRUE@ $(LIBTOOL) --tag=CC $(AM_LIBTOOLFLAGS) $(LIBTOOLFLAGS) --mode=compile $(CC) $(DEFS) $(DEFAULT_INCLUDES) $(INCLUDES) $(libcommon_la_CPPFLAGS) $(CPPFLAGS) $(AM_CFLAGS) $(CFLAGS) -MT libcommon_la-block_buffer_encoder.lo -MD -MP -MF $(DEPDIR)/libcommon_la-block_buffer_encoder.Tpo -c -o libcommon_la-block_buffer_encoder.lo `test -f 'block_buffer_encoder.c' || echo '$(srcdir)/'`block_buffer_encoder.c
-@am__fastdepCC_TRUE@ mv -f $(DEPDIR)/libcommon_la-block_buffer_encoder.Tpo $(DEPDIR)/libcommon_la-block_buffer_encoder.Plo
-@AMDEP_TRUE@@am__fastdepCC_FALSE@ source='block_buffer_encoder.c' object='libcommon_la-block_buffer_encoder.lo' libtool=yes @AMDEPBACKSLASH@
-@AMDEP_TRUE@@am__fastdepCC_FALSE@ DEPDIR=$(DEPDIR) $(CCDEPMODE) $(depcomp) @AMDEPBACKSLASH@
-@am__fastdepCC_FALSE@ $(LIBTOOL) --tag=CC $(AM_LIBTOOLFLAGS) $(LIBTOOLFLAGS) --mode=compile $(CC) $(DEFS) $(DEFAULT_INCLUDES) $(INCLUDES) $(libcommon_la_CPPFLAGS) $(CPPFLAGS) $(AM_CFLAGS) $(CFLAGS) -c -o libcommon_la-block_buffer_encoder.lo `test -f 'block_buffer_encoder.c' || echo '$(srcdir)/'`block_buffer_encoder.c
-
-libcommon_la-block_encoder.lo: block_encoder.c
-@am__fastdepCC_TRUE@ $(LIBTOOL) --tag=CC $(AM_LIBTOOLFLAGS) $(LIBTOOLFLAGS) --mode=compile $(CC) $(DEFS) $(DEFAULT_INCLUDES) $(INCLUDES) $(libcommon_la_CPPFLAGS) $(CPPFLAGS) $(AM_CFLAGS) $(CFLAGS) -MT libcommon_la-block_encoder.lo -MD -MP -MF $(DEPDIR)/libcommon_la-block_encoder.Tpo -c -o libcommon_la-block_encoder.lo `test -f 'block_encoder.c' || echo '$(srcdir)/'`block_encoder.c
-@am__fastdepCC_TRUE@ mv -f $(DEPDIR)/libcommon_la-block_encoder.Tpo $(DEPDIR)/libcommon_la-block_encoder.Plo
-@AMDEP_TRUE@@am__fastdepCC_FALSE@ source='block_encoder.c' object='libcommon_la-block_encoder.lo' libtool=yes @AMDEPBACKSLASH@
-@AMDEP_TRUE@@am__fastdepCC_FALSE@ DEPDIR=$(DEPDIR) $(CCDEPMODE) $(depcomp) @AMDEPBACKSLASH@
-@am__fastdepCC_FALSE@ $(LIBTOOL) --tag=CC $(AM_LIBTOOLFLAGS) $(LIBTOOLFLAGS) --mode=compile $(CC) $(DEFS) $(DEFAULT_INCLUDES) $(INCLUDES) $(libcommon_la_CPPFLAGS) $(CPPFLAGS) $(AM_CFLAGS) $(CFLAGS) -c -o libcommon_la-block_encoder.lo `test -f 'block_encoder.c' || echo '$(srcdir)/'`block_encoder.c
-
-libcommon_la-block_header_encoder.lo: block_header_encoder.c
-@am__fastdepCC_TRUE@ $(LIBTOOL) --tag=CC $(AM_LIBTOOLFLAGS) $(LIBTOOLFLAGS) --mode=compile $(CC) $(DEFS) $(DEFAULT_INCLUDES) $(INCLUDES) $(libcommon_la_CPPFLAGS) $(CPPFLAGS) $(AM_CFLAGS) $(CFLAGS) -MT libcommon_la-block_header_encoder.lo -MD -MP -MF $(DEPDIR)/libcommon_la-block_header_encoder.Tpo -c -o libcommon_la-block_header_encoder.lo `test -f 'block_header_encoder.c' || echo '$(srcdir)/'`block_header_encoder.c
-@am__fastdepCC_TRUE@ mv -f $(DEPDIR)/libcommon_la-block_header_encoder.Tpo $(DEPDIR)/libcommon_la-block_header_encoder.Plo
-@AMDEP_TRUE@@am__fastdepCC_FALSE@ source='block_header_encoder.c' object='libcommon_la-block_header_encoder.lo' libtool=yes @AMDEPBACKSLASH@
-@AMDEP_TRUE@@am__fastdepCC_FALSE@ DEPDIR=$(DEPDIR) $(CCDEPMODE) $(depcomp) @AMDEPBACKSLASH@
-@am__fastdepCC_FALSE@ $(LIBTOOL) --tag=CC $(AM_LIBTOOLFLAGS) $(LIBTOOLFLAGS) --mode=compile $(CC) $(DEFS) $(DEFAULT_INCLUDES) $(INCLUDES) $(libcommon_la_CPPFLAGS) $(CPPFLAGS) $(AM_CFLAGS) $(CFLAGS) -c -o libcommon_la-block_header_encoder.lo `test -f 'block_header_encoder.c' || echo '$(srcdir)/'`block_header_encoder.c
-
-libcommon_la-easy.lo: easy.c
-@am__fastdepCC_TRUE@ $(LIBTOOL) --tag=CC $(AM_LIBTOOLFLAGS) $(LIBTOOLFLAGS) --mode=compile $(CC) $(DEFS) $(DEFAULT_INCLUDES) $(INCLUDES) $(libcommon_la_CPPFLAGS) $(CPPFLAGS) $(AM_CFLAGS) $(CFLAGS) -MT libcommon_la-easy.lo -MD -MP -MF $(DEPDIR)/libcommon_la-easy.Tpo -c -o libcommon_la-easy.lo `test -f 'easy.c' || echo '$(srcdir)/'`easy.c
-@am__fastdepCC_TRUE@ mv -f $(DEPDIR)/libcommon_la-easy.Tpo $(DEPDIR)/libcommon_la-easy.Plo
-@AMDEP_TRUE@@am__fastdepCC_FALSE@ source='easy.c' object='libcommon_la-easy.lo' libtool=yes @AMDEPBACKSLASH@
-@AMDEP_TRUE@@am__fastdepCC_FALSE@ DEPDIR=$(DEPDIR) $(CCDEPMODE) $(depcomp) @AMDEPBACKSLASH@
-@am__fastdepCC_FALSE@ $(LIBTOOL) --tag=CC $(AM_LIBTOOLFLAGS) $(LIBTOOLFLAGS) --mode=compile $(CC) $(DEFS) $(DEFAULT_INCLUDES) $(INCLUDES) $(libcommon_la_CPPFLAGS) $(CPPFLAGS) $(AM_CFLAGS) $(CFLAGS) -c -o libcommon_la-easy.lo `test -f 'easy.c' || echo '$(srcdir)/'`easy.c
-
-libcommon_la-filter_buffer_encoder.lo: filter_buffer_encoder.c
-@am__fastdepCC_TRUE@ $(LIBTOOL) --tag=CC $(AM_LIBTOOLFLAGS) $(LIBTOOLFLAGS) --mode=compile $(CC) $(DEFS) $(DEFAULT_INCLUDES) $(INCLUDES) $(libcommon_la_CPPFLAGS) $(CPPFLAGS) $(AM_CFLAGS) $(CFLAGS) -MT libcommon_la-filter_buffer_encoder.lo -MD -MP -MF $(DEPDIR)/libcommon_la-filter_buffer_encoder.Tpo -c -o libcommon_la-filter_buffer_encoder.lo `test -f 'filter_buffer_encoder.c' || echo '$(srcdir)/'`filter_buffer_encoder.c
-@am__fastdepCC_TRUE@ mv -f $(DEPDIR)/libcommon_la-filter_buffer_encoder.Tpo $(DEPDIR)/libcommon_la-filter_buffer_encoder.Plo
-@AMDEP_TRUE@@am__fastdepCC_FALSE@ source='filter_buffer_encoder.c' object='libcommon_la-filter_buffer_encoder.lo' libtool=yes @AMDEPBACKSLASH@
-@AMDEP_TRUE@@am__fastdepCC_FALSE@ DEPDIR=$(DEPDIR) $(CCDEPMODE) $(depcomp) @AMDEPBACKSLASH@
-@am__fastdepCC_FALSE@ $(LIBTOOL) --tag=CC $(AM_LIBTOOLFLAGS) $(LIBTOOLFLAGS) --mode=compile $(CC) $(DEFS) $(DEFAULT_INCLUDES) $(INCLUDES) $(libcommon_la_CPPFLAGS) $(CPPFLAGS) $(AM_CFLAGS) $(CFLAGS) -c -o libcommon_la-filter_buffer_encoder.lo `test -f 'filter_buffer_encoder.c' || echo '$(srcdir)/'`filter_buffer_encoder.c
-
-libcommon_la-filter_encoder.lo: filter_encoder.c
-@am__fastdepCC_TRUE@ $(LIBTOOL) --tag=CC $(AM_LIBTOOLFLAGS) $(LIBTOOLFLAGS) --mode=compile $(CC) $(DEFS) $(DEFAULT_INCLUDES) $(INCLUDES) $(libcommon_la_CPPFLAGS) $(CPPFLAGS) $(AM_CFLAGS) $(CFLAGS) -MT libcommon_la-filter_encoder.lo -MD -MP -MF $(DEPDIR)/libcommon_la-filter_encoder.Tpo -c -o libcommon_la-filter_encoder.lo `test -f 'filter_encoder.c' || echo '$(srcdir)/'`filter_encoder.c
-@am__fastdepCC_TRUE@ mv -f $(DEPDIR)/libcommon_la-filter_encoder.Tpo $(DEPDIR)/libcommon_la-filter_encoder.Plo
-@AMDEP_TRUE@@am__fastdepCC_FALSE@ source='filter_encoder.c' object='libcommon_la-filter_encoder.lo' libtool=yes @AMDEPBACKSLASH@
-@AMDEP_TRUE@@am__fastdepCC_FALSE@ DEPDIR=$(DEPDIR) $(CCDEPMODE) $(depcomp) @AMDEPBACKSLASH@
-@am__fastdepCC_FALSE@ $(LIBTOOL) --tag=CC $(AM_LIBTOOLFLAGS) $(LIBTOOLFLAGS) --mode=compile $(CC) $(DEFS) $(DEFAULT_INCLUDES) $(INCLUDES) $(libcommon_la_CPPFLAGS) $(CPPFLAGS) $(AM_CFLAGS) $(CFLAGS) -c -o libcommon_la-filter_encoder.lo `test -f 'filter_encoder.c' || echo '$(srcdir)/'`filter_encoder.c
-
-libcommon_la-filter_flags_encoder.lo: filter_flags_encoder.c
-@am__fastdepCC_TRUE@ $(LIBTOOL) --tag=CC $(AM_LIBTOOLFLAGS) $(LIBTOOLFLAGS) --mode=compile $(CC) $(DEFS) $(DEFAULT_INCLUDES) $(INCLUDES) $(libcommon_la_CPPFLAGS) $(CPPFLAGS) $(AM_CFLAGS) $(CFLAGS) -MT libcommon_la-filter_flags_encoder.lo -MD -MP -MF $(DEPDIR)/libcommon_la-filter_flags_encoder.Tpo -c -o libcommon_la-filter_flags_encoder.lo `test -f 'filter_flags_encoder.c' || echo '$(srcdir)/'`filter_flags_encoder.c
-@am__fastdepCC_TRUE@ mv -f $(DEPDIR)/libcommon_la-filter_flags_encoder.Tpo $(DEPDIR)/libcommon_la-filter_flags_encoder.Plo
-@AMDEP_TRUE@@am__fastdepCC_FALSE@ source='filter_flags_encoder.c' object='libcommon_la-filter_flags_encoder.lo' libtool=yes @AMDEPBACKSLASH@
-@AMDEP_TRUE@@am__fastdepCC_FALSE@ DEPDIR=$(DEPDIR) $(CCDEPMODE) $(depcomp) @AMDEPBACKSLASH@
-@am__fastdepCC_FALSE@ $(LIBTOOL) --tag=CC $(AM_LIBTOOLFLAGS) $(LIBTOOLFLAGS) --mode=compile $(CC) $(DEFS) $(DEFAULT_INCLUDES) $(INCLUDES) $(libcommon_la_CPPFLAGS) $(CPPFLAGS) $(AM_CFLAGS) $(CFLAGS) -c -o libcommon_la-filter_flags_encoder.lo `test -f 'filter_flags_encoder.c' || echo '$(srcdir)/'`filter_flags_encoder.c
-
-libcommon_la-index_encoder.lo: index_encoder.c
-@am__fastdepCC_TRUE@ $(LIBTOOL) --tag=CC $(AM_LIBTOOLFLAGS) $(LIBTOOLFLAGS) --mode=compile $(CC) $(DEFS) $(DEFAULT_INCLUDES) $(INCLUDES) $(libcommon_la_CPPFLAGS) $(CPPFLAGS) $(AM_CFLAGS) $(CFLAGS) -MT libcommon_la-index_encoder.lo -MD -MP -MF $(DEPDIR)/libcommon_la-index_encoder.Tpo -c -o libcommon_la-index_encoder.lo `test -f 'index_encoder.c' || echo '$(srcdir)/'`index_encoder.c
-@am__fastdepCC_TRUE@ mv -f $(DEPDIR)/libcommon_la-index_encoder.Tpo $(DEPDIR)/libcommon_la-index_encoder.Plo
-@AMDEP_TRUE@@am__fastdepCC_FALSE@ source='index_encoder.c' object='libcommon_la-index_encoder.lo' libtool=yes @AMDEPBACKSLASH@
-@AMDEP_TRUE@@am__fastdepCC_FALSE@ DEPDIR=$(DEPDIR) $(CCDEPMODE) $(depcomp) @AMDEPBACKSLASH@
-@am__fastdepCC_FALSE@ $(LIBTOOL) --tag=CC $(AM_LIBTOOLFLAGS) $(LIBTOOLFLAGS) --mode=compile $(CC) $(DEFS) $(DEFAULT_INCLUDES) $(INCLUDES) $(libcommon_la_CPPFLAGS) $(CPPFLAGS) $(AM_CFLAGS) $(CFLAGS) -c -o libcommon_la-index_encoder.lo `test -f 'index_encoder.c' || echo '$(srcdir)/'`index_encoder.c
-
-libcommon_la-stream_buffer_encoder.lo: stream_buffer_encoder.c
-@am__fastdepCC_TRUE@ $(LIBTOOL) --tag=CC $(AM_LIBTOOLFLAGS) $(LIBTOOLFLAGS) --mode=compile $(CC) $(DEFS) $(DEFAULT_INCLUDES) $(INCLUDES) $(libcommon_la_CPPFLAGS) $(CPPFLAGS) $(AM_CFLAGS) $(CFLAGS) -MT libcommon_la-stream_buffer_encoder.lo -MD -MP -MF $(DEPDIR)/libcommon_la-stream_buffer_encoder.Tpo -c -o libcommon_la-stream_buffer_encoder.lo `test -f 'stream_buffer_encoder.c' || echo '$(srcdir)/'`stream_buffer_encoder.c
-@am__fastdepCC_TRUE@ mv -f $(DEPDIR)/libcommon_la-stream_buffer_encoder.Tpo $(DEPDIR)/libcommon_la-stream_buffer_encoder.Plo
-@AMDEP_TRUE@@am__fastdepCC_FALSE@ source='stream_buffer_encoder.c' object='libcommon_la-stream_buffer_encoder.lo' libtool=yes @AMDEPBACKSLASH@
-@AMDEP_TRUE@@am__fastdepCC_FALSE@ DEPDIR=$(DEPDIR) $(CCDEPMODE) $(depcomp) @AMDEPBACKSLASH@
-@am__fastdepCC_FALSE@ $(LIBTOOL) --tag=CC $(AM_LIBTOOLFLAGS) $(LIBTOOLFLAGS) --mode=compile $(CC) $(DEFS) $(DEFAULT_INCLUDES) $(INCLUDES) $(libcommon_la_CPPFLAGS) $(CPPFLAGS) $(AM_CFLAGS) $(CFLAGS) -c -o libcommon_la-stream_buffer_encoder.lo `test -f 'stream_buffer_encoder.c' || echo '$(srcdir)/'`stream_buffer_encoder.c
-
-libcommon_la-stream_encoder.lo: stream_encoder.c
-@am__fastdepCC_TRUE@ $(LIBTOOL) --tag=CC $(AM_LIBTOOLFLAGS) $(LIBTOOLFLAGS) --mode=compile $(CC) $(DEFS) $(DEFAULT_INCLUDES) $(INCLUDES) $(libcommon_la_CPPFLAGS) $(CPPFLAGS) $(AM_CFLAGS) $(CFLAGS) -MT libcommon_la-stream_encoder.lo -MD -MP -MF $(DEPDIR)/libcommon_la-stream_encoder.Tpo -c -o libcommon_la-stream_encoder.lo `test -f 'stream_encoder.c' || echo '$(srcdir)/'`stream_encoder.c
-@am__fastdepCC_TRUE@ mv -f $(DEPDIR)/libcommon_la-stream_encoder.Tpo $(DEPDIR)/libcommon_la-stream_encoder.Plo
-@AMDEP_TRUE@@am__fastdepCC_FALSE@ source='stream_encoder.c' object='libcommon_la-stream_encoder.lo' libtool=yes @AMDEPBACKSLASH@
-@AMDEP_TRUE@@am__fastdepCC_FALSE@ DEPDIR=$(DEPDIR) $(CCDEPMODE) $(depcomp) @AMDEPBACKSLASH@
-@am__fastdepCC_FALSE@ $(LIBTOOL) --tag=CC $(AM_LIBTOOLFLAGS) $(LIBTOOLFLAGS) --mode=compile $(CC) $(DEFS) $(DEFAULT_INCLUDES) $(INCLUDES) $(libcommon_la_CPPFLAGS) $(CPPFLAGS) $(AM_CFLAGS) $(CFLAGS) -c -o libcommon_la-stream_encoder.lo `test -f 'stream_encoder.c' || echo '$(srcdir)/'`stream_encoder.c
-
-libcommon_la-stream_flags_encoder.lo: stream_flags_encoder.c
-@am__fastdepCC_TRUE@ $(LIBTOOL) --tag=CC $(AM_LIBTOOLFLAGS) $(LIBTOOLFLAGS) --mode=compile $(CC) $(DEFS) $(DEFAULT_INCLUDES) $(INCLUDES) $(libcommon_la_CPPFLAGS) $(CPPFLAGS) $(AM_CFLAGS) $(CFLAGS) -MT libcommon_la-stream_flags_encoder.lo -MD -MP -MF $(DEPDIR)/libcommon_la-stream_flags_encoder.Tpo -c -o libcommon_la-stream_flags_encoder.lo `test -f 'stream_flags_encoder.c' || echo '$(srcdir)/'`stream_flags_encoder.c
-@am__fastdepCC_TRUE@ mv -f $(DEPDIR)/libcommon_la-stream_flags_encoder.Tpo $(DEPDIR)/libcommon_la-stream_flags_encoder.Plo
-@AMDEP_TRUE@@am__fastdepCC_FALSE@ source='stream_flags_encoder.c' object='libcommon_la-stream_flags_encoder.lo' libtool=yes @AMDEPBACKSLASH@
-@AMDEP_TRUE@@am__fastdepCC_FALSE@ DEPDIR=$(DEPDIR) $(CCDEPMODE) $(depcomp) @AMDEPBACKSLASH@
-@am__fastdepCC_FALSE@ $(LIBTOOL) --tag=CC $(AM_LIBTOOLFLAGS) $(LIBTOOLFLAGS) --mode=compile $(CC) $(DEFS) $(DEFAULT_INCLUDES) $(INCLUDES) $(libcommon_la_CPPFLAGS) $(CPPFLAGS) $(AM_CFLAGS) $(CFLAGS) -c -o libcommon_la-stream_flags_encoder.lo `test -f 'stream_flags_encoder.c' || echo '$(srcdir)/'`stream_flags_encoder.c
-
-libcommon_la-vli_encoder.lo: vli_encoder.c
-@am__fastdepCC_TRUE@ $(LIBTOOL) --tag=CC $(AM_LIBTOOLFLAGS) $(LIBTOOLFLAGS) --mode=compile $(CC) $(DEFS) $(DEFAULT_INCLUDES) $(INCLUDES) $(libcommon_la_CPPFLAGS) $(CPPFLAGS) $(AM_CFLAGS) $(CFLAGS) -MT libcommon_la-vli_encoder.lo -MD -MP -MF $(DEPDIR)/libcommon_la-vli_encoder.Tpo -c -o libcommon_la-vli_encoder.lo `test -f 'vli_encoder.c' || echo '$(srcdir)/'`vli_encoder.c
-@am__fastdepCC_TRUE@ mv -f $(DEPDIR)/libcommon_la-vli_encoder.Tpo $(DEPDIR)/libcommon_la-vli_encoder.Plo
-@AMDEP_TRUE@@am__fastdepCC_FALSE@ source='vli_encoder.c' object='libcommon_la-vli_encoder.lo' libtool=yes @AMDEPBACKSLASH@
-@AMDEP_TRUE@@am__fastdepCC_FALSE@ DEPDIR=$(DEPDIR) $(CCDEPMODE) $(depcomp) @AMDEPBACKSLASH@
-@am__fastdepCC_FALSE@ $(LIBTOOL) --tag=CC $(AM_LIBTOOLFLAGS) $(LIBTOOLFLAGS) --mode=compile $(CC) $(DEFS) $(DEFAULT_INCLUDES) $(INCLUDES) $(libcommon_la_CPPFLAGS) $(CPPFLAGS) $(AM_CFLAGS) $(CFLAGS) -c -o libcommon_la-vli_encoder.lo `test -f 'vli_encoder.c' || echo '$(srcdir)/'`vli_encoder.c
-
-libcommon_la-alone_decoder.lo: alone_decoder.c
-@am__fastdepCC_TRUE@ $(LIBTOOL) --tag=CC $(AM_LIBTOOLFLAGS) $(LIBTOOLFLAGS) --mode=compile $(CC) $(DEFS) $(DEFAULT_INCLUDES) $(INCLUDES) $(libcommon_la_CPPFLAGS) $(CPPFLAGS) $(AM_CFLAGS) $(CFLAGS) -MT libcommon_la-alone_decoder.lo -MD -MP -MF $(DEPDIR)/libcommon_la-alone_decoder.Tpo -c -o libcommon_la-alone_decoder.lo `test -f 'alone_decoder.c' || echo '$(srcdir)/'`alone_decoder.c
-@am__fastdepCC_TRUE@ mv -f $(DEPDIR)/libcommon_la-alone_decoder.Tpo $(DEPDIR)/libcommon_la-alone_decoder.Plo
-@AMDEP_TRUE@@am__fastdepCC_FALSE@ source='alone_decoder.c' object='libcommon_la-alone_decoder.lo' libtool=yes @AMDEPBACKSLASH@
-@AMDEP_TRUE@@am__fastdepCC_FALSE@ DEPDIR=$(DEPDIR) $(CCDEPMODE) $(depcomp) @AMDEPBACKSLASH@
-@am__fastdepCC_FALSE@ $(LIBTOOL) --tag=CC $(AM_LIBTOOLFLAGS) $(LIBTOOLFLAGS) --mode=compile $(CC) $(DEFS) $(DEFAULT_INCLUDES) $(INCLUDES) $(libcommon_la_CPPFLAGS) $(CPPFLAGS) $(AM_CFLAGS) $(CFLAGS) -c -o libcommon_la-alone_decoder.lo `test -f 'alone_decoder.c' || echo '$(srcdir)/'`alone_decoder.c
-
-libcommon_la-auto_decoder.lo: auto_decoder.c
-@am__fastdepCC_TRUE@ $(LIBTOOL) --tag=CC $(AM_LIBTOOLFLAGS) $(LIBTOOLFLAGS) --mode=compile $(CC) $(DEFS) $(DEFAULT_INCLUDES) $(INCLUDES) $(libcommon_la_CPPFLAGS) $(CPPFLAGS) $(AM_CFLAGS) $(CFLAGS) -MT libcommon_la-auto_decoder.lo -MD -MP -MF $(DEPDIR)/libcommon_la-auto_decoder.Tpo -c -o libcommon_la-auto_decoder.lo `test -f 'auto_decoder.c' || echo '$(srcdir)/'`auto_decoder.c
-@am__fastdepCC_TRUE@ mv -f $(DEPDIR)/libcommon_la-auto_decoder.Tpo $(DEPDIR)/libcommon_la-auto_decoder.Plo
-@AMDEP_TRUE@@am__fastdepCC_FALSE@ source='auto_decoder.c' object='libcommon_la-auto_decoder.lo' libtool=yes @AMDEPBACKSLASH@
-@AMDEP_TRUE@@am__fastdepCC_FALSE@ DEPDIR=$(DEPDIR) $(CCDEPMODE) $(depcomp) @AMDEPBACKSLASH@
-@am__fastdepCC_FALSE@ $(LIBTOOL) --tag=CC $(AM_LIBTOOLFLAGS) $(LIBTOOLFLAGS) --mode=compile $(CC) $(DEFS) $(DEFAULT_INCLUDES) $(INCLUDES) $(libcommon_la_CPPFLAGS) $(CPPFLAGS) $(AM_CFLAGS) $(CFLAGS) -c -o libcommon_la-auto_decoder.lo `test -f 'auto_decoder.c' || echo '$(srcdir)/'`auto_decoder.c
-
-libcommon_la-block_buffer_decoder.lo: block_buffer_decoder.c
-@am__fastdepCC_TRUE@ $(LIBTOOL) --tag=CC $(AM_LIBTOOLFLAGS) $(LIBTOOLFLAGS) --mode=compile $(CC) $(DEFS) $(DEFAULT_INCLUDES) $(INCLUDES) $(libcommon_la_CPPFLAGS) $(CPPFLAGS) $(AM_CFLAGS) $(CFLAGS) -MT libcommon_la-block_buffer_decoder.lo -MD -MP -MF $(DEPDIR)/libcommon_la-block_buffer_decoder.Tpo -c -o libcommon_la-block_buffer_decoder.lo `test -f 'block_buffer_decoder.c' || echo '$(srcdir)/'`block_buffer_decoder.c
-@am__fastdepCC_TRUE@ mv -f $(DEPDIR)/libcommon_la-block_buffer_decoder.Tpo $(DEPDIR)/libcommon_la-block_buffer_decoder.Plo
-@AMDEP_TRUE@@am__fastdepCC_FALSE@ source='block_buffer_decoder.c' object='libcommon_la-block_buffer_decoder.lo' libtool=yes @AMDEPBACKSLASH@
-@AMDEP_TRUE@@am__fastdepCC_FALSE@ DEPDIR=$(DEPDIR) $(CCDEPMODE) $(depcomp) @AMDEPBACKSLASH@
-@am__fastdepCC_FALSE@ $(LIBTOOL) --tag=CC $(AM_LIBTOOLFLAGS) $(LIBTOOLFLAGS) --mode=compile $(CC) $(DEFS) $(DEFAULT_INCLUDES) $(INCLUDES) $(libcommon_la_CPPFLAGS) $(CPPFLAGS) $(AM_CFLAGS) $(CFLAGS) -c -o libcommon_la-block_buffer_decoder.lo `test -f 'block_buffer_decoder.c' || echo '$(srcdir)/'`block_buffer_decoder.c
-
-libcommon_la-block_decoder.lo: block_decoder.c
-@am__fastdepCC_TRUE@ $(LIBTOOL) --tag=CC $(AM_LIBTOOLFLAGS) $(LIBTOOLFLAGS) --mode=compile $(CC) $(DEFS) $(DEFAULT_INCLUDES) $(INCLUDES) $(libcommon_la_CPPFLAGS) $(CPPFLAGS) $(AM_CFLAGS) $(CFLAGS) -MT libcommon_la-block_decoder.lo -MD -MP -MF $(DEPDIR)/libcommon_la-block_decoder.Tpo -c -o libcommon_la-block_decoder.lo `test -f 'block_decoder.c' || echo '$(srcdir)/'`block_decoder.c
-@am__fastdepCC_TRUE@ mv -f $(DEPDIR)/libcommon_la-block_decoder.Tpo $(DEPDIR)/libcommon_la-block_decoder.Plo
-@AMDEP_TRUE@@am__fastdepCC_FALSE@ source='block_decoder.c' object='libcommon_la-block_decoder.lo' libtool=yes @AMDEPBACKSLASH@
-@AMDEP_TRUE@@am__fastdepCC_FALSE@ DEPDIR=$(DEPDIR) $(CCDEPMODE) $(depcomp) @AMDEPBACKSLASH@
-@am__fastdepCC_FALSE@ $(LIBTOOL) --tag=CC $(AM_LIBTOOLFLAGS) $(LIBTOOLFLAGS) --mode=compile $(CC) $(DEFS) $(DEFAULT_INCLUDES) $(INCLUDES) $(libcommon_la_CPPFLAGS) $(CPPFLAGS) $(AM_CFLAGS) $(CFLAGS) -c -o libcommon_la-block_decoder.lo `test -f 'block_decoder.c' || echo '$(srcdir)/'`block_decoder.c
-
-libcommon_la-block_header_decoder.lo: block_header_decoder.c
-@am__fastdepCC_TRUE@ $(LIBTOOL) --tag=CC $(AM_LIBTOOLFLAGS) $(LIBTOOLFLAGS) --mode=compile $(CC) $(DEFS) $(DEFAULT_INCLUDES) $(INCLUDES) $(libcommon_la_CPPFLAGS) $(CPPFLAGS) $(AM_CFLAGS) $(CFLAGS) -MT libcommon_la-block_header_decoder.lo -MD -MP -MF $(DEPDIR)/libcommon_la-block_header_decoder.Tpo -c -o libcommon_la-block_header_decoder.lo `test -f 'block_header_decoder.c' || echo '$(srcdir)/'`block_header_decoder.c
-@am__fastdepCC_TRUE@ mv -f $(DEPDIR)/libcommon_la-block_header_decoder.Tpo $(DEPDIR)/libcommon_la-block_header_decoder.Plo
-@AMDEP_TRUE@@am__fastdepCC_FALSE@ source='block_header_decoder.c' object='libcommon_la-block_header_decoder.lo' libtool=yes @AMDEPBACKSLASH@
-@AMDEP_TRUE@@am__fastdepCC_FALSE@ DEPDIR=$(DEPDIR) $(CCDEPMODE) $(depcomp) @AMDEPBACKSLASH@
-@am__fastdepCC_FALSE@ $(LIBTOOL) --tag=CC $(AM_LIBTOOLFLAGS) $(LIBTOOLFLAGS) --mode=compile $(CC) $(DEFS) $(DEFAULT_INCLUDES) $(INCLUDES) $(libcommon_la_CPPFLAGS) $(CPPFLAGS) $(AM_CFLAGS) $(CFLAGS) -c -o libcommon_la-block_header_decoder.lo `test -f 'block_header_decoder.c' || echo '$(srcdir)/'`block_header_decoder.c
-
-libcommon_la-filter_buffer_decoder.lo: filter_buffer_decoder.c
-@am__fastdepCC_TRUE@ $(LIBTOOL) --tag=CC $(AM_LIBTOOLFLAGS) $(LIBTOOLFLAGS) --mode=compile $(CC) $(DEFS) $(DEFAULT_INCLUDES) $(INCLUDES) $(libcommon_la_CPPFLAGS) $(CPPFLAGS) $(AM_CFLAGS) $(CFLAGS) -MT libcommon_la-filter_buffer_decoder.lo -MD -MP -MF $(DEPDIR)/libcommon_la-filter_buffer_decoder.Tpo -c -o libcommon_la-filter_buffer_decoder.lo `test -f 'filter_buffer_decoder.c' || echo '$(srcdir)/'`filter_buffer_decoder.c
-@am__fastdepCC_TRUE@ mv -f $(DEPDIR)/libcommon_la-filter_buffer_decoder.Tpo $(DEPDIR)/libcommon_la-filter_buffer_decoder.Plo
-@AMDEP_TRUE@@am__fastdepCC_FALSE@ source='filter_buffer_decoder.c' object='libcommon_la-filter_buffer_decoder.lo' libtool=yes @AMDEPBACKSLASH@
-@AMDEP_TRUE@@am__fastdepCC_FALSE@ DEPDIR=$(DEPDIR) $(CCDEPMODE) $(depcomp) @AMDEPBACKSLASH@
-@am__fastdepCC_FALSE@ $(LIBTOOL) --tag=CC $(AM_LIBTOOLFLAGS) $(LIBTOOLFLAGS) --mode=compile $(CC) $(DEFS) $(DEFAULT_INCLUDES) $(INCLUDES) $(libcommon_la_CPPFLAGS) $(CPPFLAGS) $(AM_CFLAGS) $(CFLAGS) -c -o libcommon_la-filter_buffer_decoder.lo `test -f 'filter_buffer_decoder.c' || echo '$(srcdir)/'`filter_buffer_decoder.c
-
-libcommon_la-filter_decoder.lo: filter_decoder.c
-@am__fastdepCC_TRUE@ $(LIBTOOL) --tag=CC $(AM_LIBTOOLFLAGS) $(LIBTOOLFLAGS) --mode=compile $(CC) $(DEFS) $(DEFAULT_INCLUDES) $(INCLUDES) $(libcommon_la_CPPFLAGS) $(CPPFLAGS) $(AM_CFLAGS) $(CFLAGS) -MT libcommon_la-filter_decoder.lo -MD -MP -MF $(DEPDIR)/libcommon_la-filter_decoder.Tpo -c -o libcommon_la-filter_decoder.lo `test -f 'filter_decoder.c' || echo '$(srcdir)/'`filter_decoder.c
-@am__fastdepCC_TRUE@ mv -f $(DEPDIR)/libcommon_la-filter_decoder.Tpo $(DEPDIR)/libcommon_la-filter_decoder.Plo
-@AMDEP_TRUE@@am__fastdepCC_FALSE@ source='filter_decoder.c' object='libcommon_la-filter_decoder.lo' libtool=yes @AMDEPBACKSLASH@
-@AMDEP_TRUE@@am__fastdepCC_FALSE@ DEPDIR=$(DEPDIR) $(CCDEPMODE) $(depcomp) @AMDEPBACKSLASH@
-@am__fastdepCC_FALSE@ $(LIBTOOL) --tag=CC $(AM_LIBTOOLFLAGS) $(LIBTOOLFLAGS) --mode=compile $(CC) $(DEFS) $(DEFAULT_INCLUDES) $(INCLUDES) $(libcommon_la_CPPFLAGS) $(CPPFLAGS) $(AM_CFLAGS) $(CFLAGS) -c -o libcommon_la-filter_decoder.lo `test -f 'filter_decoder.c' || echo '$(srcdir)/'`filter_decoder.c
-
-libcommon_la-filter_flags_decoder.lo: filter_flags_decoder.c
-@am__fastdepCC_TRUE@ $(LIBTOOL) --tag=CC $(AM_LIBTOOLFLAGS) $(LIBTOOLFLAGS) --mode=compile $(CC) $(DEFS) $(DEFAULT_INCLUDES) $(INCLUDES) $(libcommon_la_CPPFLAGS) $(CPPFLAGS) $(AM_CFLAGS) $(CFLAGS) -MT libcommon_la-filter_flags_decoder.lo -MD -MP -MF $(DEPDIR)/libcommon_la-filter_flags_decoder.Tpo -c -o libcommon_la-filter_flags_decoder.lo `test -f 'filter_flags_decoder.c' || echo '$(srcdir)/'`filter_flags_decoder.c
-@am__fastdepCC_TRUE@ mv -f $(DEPDIR)/libcommon_la-filter_flags_decoder.Tpo $(DEPDIR)/libcommon_la-filter_flags_decoder.Plo
-@AMDEP_TRUE@@am__fastdepCC_FALSE@ source='filter_flags_decoder.c' object='libcommon_la-filter_flags_decoder.lo' libtool=yes @AMDEPBACKSLASH@
-@AMDEP_TRUE@@am__fastdepCC_FALSE@ DEPDIR=$(DEPDIR) $(CCDEPMODE) $(depcomp) @AMDEPBACKSLASH@
-@am__fastdepCC_FALSE@ $(LIBTOOL) --tag=CC $(AM_LIBTOOLFLAGS) $(LIBTOOLFLAGS) --mode=compile $(CC) $(DEFS) $(DEFAULT_INCLUDES) $(INCLUDES) $(libcommon_la_CPPFLAGS) $(CPPFLAGS) $(AM_CFLAGS) $(CFLAGS) -c -o libcommon_la-filter_flags_decoder.lo `test -f 'filter_flags_decoder.c' || echo '$(srcdir)/'`filter_flags_decoder.c
-
-libcommon_la-index_decoder.lo: index_decoder.c
-@am__fastdepCC_TRUE@ $(LIBTOOL) --tag=CC $(AM_LIBTOOLFLAGS) $(LIBTOOLFLAGS) --mode=compile $(CC) $(DEFS) $(DEFAULT_INCLUDES) $(INCLUDES) $(libcommon_la_CPPFLAGS) $(CPPFLAGS) $(AM_CFLAGS) $(CFLAGS) -MT libcommon_la-index_decoder.lo -MD -MP -MF $(DEPDIR)/libcommon_la-index_decoder.Tpo -c -o libcommon_la-index_decoder.lo `test -f 'index_decoder.c' || echo '$(srcdir)/'`index_decoder.c
-@am__fastdepCC_TRUE@ mv -f $(DEPDIR)/libcommon_la-index_decoder.Tpo $(DEPDIR)/libcommon_la-index_decoder.Plo
-@AMDEP_TRUE@@am__fastdepCC_FALSE@ source='index_decoder.c' object='libcommon_la-index_decoder.lo' libtool=yes @AMDEPBACKSLASH@
-@AMDEP_TRUE@@am__fastdepCC_FALSE@ DEPDIR=$(DEPDIR) $(CCDEPMODE) $(depcomp) @AMDEPBACKSLASH@
-@am__fastdepCC_FALSE@ $(LIBTOOL) --tag=CC $(AM_LIBTOOLFLAGS) $(LIBTOOLFLAGS) --mode=compile $(CC) $(DEFS) $(DEFAULT_INCLUDES) $(INCLUDES) $(libcommon_la_CPPFLAGS) $(CPPFLAGS) $(AM_CFLAGS) $(CFLAGS) -c -o libcommon_la-index_decoder.lo `test -f 'index_decoder.c' || echo '$(srcdir)/'`index_decoder.c
-
-libcommon_la-index_hash.lo: index_hash.c
-@am__fastdepCC_TRUE@ $(LIBTOOL) --tag=CC $(AM_LIBTOOLFLAGS) $(LIBTOOLFLAGS) --mode=compile $(CC) $(DEFS) $(DEFAULT_INCLUDES) $(INCLUDES) $(libcommon_la_CPPFLAGS) $(CPPFLAGS) $(AM_CFLAGS) $(CFLAGS) -MT libcommon_la-index_hash.lo -MD -MP -MF $(DEPDIR)/libcommon_la-index_hash.Tpo -c -o libcommon_la-index_hash.lo `test -f 'index_hash.c' || echo '$(srcdir)/'`index_hash.c
-@am__fastdepCC_TRUE@ mv -f $(DEPDIR)/libcommon_la-index_hash.Tpo $(DEPDIR)/libcommon_la-index_hash.Plo
-@AMDEP_TRUE@@am__fastdepCC_FALSE@ source='index_hash.c' object='libcommon_la-index_hash.lo' libtool=yes @AMDEPBACKSLASH@
-@AMDEP_TRUE@@am__fastdepCC_FALSE@ DEPDIR=$(DEPDIR) $(CCDEPMODE) $(depcomp) @AMDEPBACKSLASH@
-@am__fastdepCC_FALSE@ $(LIBTOOL) --tag=CC $(AM_LIBTOOLFLAGS) $(LIBTOOLFLAGS) --mode=compile $(CC) $(DEFS) $(DEFAULT_INCLUDES) $(INCLUDES) $(libcommon_la_CPPFLAGS) $(CPPFLAGS) $(AM_CFLAGS) $(CFLAGS) -c -o libcommon_la-index_hash.lo `test -f 'index_hash.c' || echo '$(srcdir)/'`index_hash.c
-
-libcommon_la-stream_buffer_decoder.lo: stream_buffer_decoder.c
-@am__fastdepCC_TRUE@ $(LIBTOOL) --tag=CC $(AM_LIBTOOLFLAGS) $(LIBTOOLFLAGS) --mode=compile $(CC) $(DEFS) $(DEFAULT_INCLUDES) $(INCLUDES) $(libcommon_la_CPPFLAGS) $(CPPFLAGS) $(AM_CFLAGS) $(CFLAGS) -MT libcommon_la-stream_buffer_decoder.lo -MD -MP -MF $(DEPDIR)/libcommon_la-stream_buffer_decoder.Tpo -c -o libcommon_la-stream_buffer_decoder.lo `test -f 'stream_buffer_decoder.c' || echo '$(srcdir)/'`stream_buffer_decoder.c
-@am__fastdepCC_TRUE@ mv -f $(DEPDIR)/libcommon_la-stream_buffer_decoder.Tpo $(DEPDIR)/libcommon_la-stream_buffer_decoder.Plo
-@AMDEP_TRUE@@am__fastdepCC_FALSE@ source='stream_buffer_decoder.c' object='libcommon_la-stream_buffer_decoder.lo' libtool=yes @AMDEPBACKSLASH@
-@AMDEP_TRUE@@am__fastdepCC_FALSE@ DEPDIR=$(DEPDIR) $(CCDEPMODE) $(depcomp) @AMDEPBACKSLASH@
-@am__fastdepCC_FALSE@ $(LIBTOOL) --tag=CC $(AM_LIBTOOLFLAGS) $(LIBTOOLFLAGS) --mode=compile $(CC) $(DEFS) $(DEFAULT_INCLUDES) $(INCLUDES) $(libcommon_la_CPPFLAGS) $(CPPFLAGS) $(AM_CFLAGS) $(CFLAGS) -c -o libcommon_la-stream_buffer_decoder.lo `test -f 'stream_buffer_decoder.c' || echo '$(srcdir)/'`stream_buffer_decoder.c
-
-libcommon_la-stream_decoder.lo: stream_decoder.c
-@am__fastdepCC_TRUE@ $(LIBTOOL) --tag=CC $(AM_LIBTOOLFLAGS) $(LIBTOOLFLAGS) --mode=compile $(CC) $(DEFS) $(DEFAULT_INCLUDES) $(INCLUDES) $(libcommon_la_CPPFLAGS) $(CPPFLAGS) $(AM_CFLAGS) $(CFLAGS) -MT libcommon_la-stream_decoder.lo -MD -MP -MF $(DEPDIR)/libcommon_la-stream_decoder.Tpo -c -o libcommon_la-stream_decoder.lo `test -f 'stream_decoder.c' || echo '$(srcdir)/'`stream_decoder.c
-@am__fastdepCC_TRUE@ mv -f $(DEPDIR)/libcommon_la-stream_decoder.Tpo $(DEPDIR)/libcommon_la-stream_decoder.Plo
-@AMDEP_TRUE@@am__fastdepCC_FALSE@ source='stream_decoder.c' object='libcommon_la-stream_decoder.lo' libtool=yes @AMDEPBACKSLASH@
-@AMDEP_TRUE@@am__fastdepCC_FALSE@ DEPDIR=$(DEPDIR) $(CCDEPMODE) $(depcomp) @AMDEPBACKSLASH@
-@am__fastdepCC_FALSE@ $(LIBTOOL) --tag=CC $(AM_LIBTOOLFLAGS) $(LIBTOOLFLAGS) --mode=compile $(CC) $(DEFS) $(DEFAULT_INCLUDES) $(INCLUDES) $(libcommon_la_CPPFLAGS) $(CPPFLAGS) $(AM_CFLAGS) $(CFLAGS) -c -o libcommon_la-stream_decoder.lo `test -f 'stream_decoder.c' || echo '$(srcdir)/'`stream_decoder.c
-
-libcommon_la-stream_flags_decoder.lo: stream_flags_decoder.c
-@am__fastdepCC_TRUE@ $(LIBTOOL) --tag=CC $(AM_LIBTOOLFLAGS) $(LIBTOOLFLAGS) --mode=compile $(CC) $(DEFS) $(DEFAULT_INCLUDES) $(INCLUDES) $(libcommon_la_CPPFLAGS) $(CPPFLAGS) $(AM_CFLAGS) $(CFLAGS) -MT libcommon_la-stream_flags_decoder.lo -MD -MP -MF $(DEPDIR)/libcommon_la-stream_flags_decoder.Tpo -c -o libcommon_la-stream_flags_decoder.lo `test -f 'stream_flags_decoder.c' || echo '$(srcdir)/'`stream_flags_decoder.c
-@am__fastdepCC_TRUE@ mv -f $(DEPDIR)/libcommon_la-stream_flags_decoder.Tpo $(DEPDIR)/libcommon_la-stream_flags_decoder.Plo
-@AMDEP_TRUE@@am__fastdepCC_FALSE@ source='stream_flags_decoder.c' object='libcommon_la-stream_flags_decoder.lo' libtool=yes @AMDEPBACKSLASH@
-@AMDEP_TRUE@@am__fastdepCC_FALSE@ DEPDIR=$(DEPDIR) $(CCDEPMODE) $(depcomp) @AMDEPBACKSLASH@
-@am__fastdepCC_FALSE@ $(LIBTOOL) --tag=CC $(AM_LIBTOOLFLAGS) $(LIBTOOLFLAGS) --mode=compile $(CC) $(DEFS) $(DEFAULT_INCLUDES) $(INCLUDES) $(libcommon_la_CPPFLAGS) $(CPPFLAGS) $(AM_CFLAGS) $(CFLAGS) -c -o libcommon_la-stream_flags_decoder.lo `test -f 'stream_flags_decoder.c' || echo '$(srcdir)/'`stream_flags_decoder.c
-
-libcommon_la-vli_decoder.lo: vli_decoder.c
-@am__fastdepCC_TRUE@ $(LIBTOOL) --tag=CC $(AM_LIBTOOLFLAGS) $(LIBTOOLFLAGS) --mode=compile $(CC) $(DEFS) $(DEFAULT_INCLUDES) $(INCLUDES) $(libcommon_la_CPPFLAGS) $(CPPFLAGS) $(AM_CFLAGS) $(CFLAGS) -MT libcommon_la-vli_decoder.lo -MD -MP -MF $(DEPDIR)/libcommon_la-vli_decoder.Tpo -c -o libcommon_la-vli_decoder.lo `test -f 'vli_decoder.c' || echo '$(srcdir)/'`vli_decoder.c
-@am__fastdepCC_TRUE@ mv -f $(DEPDIR)/libcommon_la-vli_decoder.Tpo $(DEPDIR)/libcommon_la-vli_decoder.Plo
-@AMDEP_TRUE@@am__fastdepCC_FALSE@ source='vli_decoder.c' object='libcommon_la-vli_decoder.lo' libtool=yes @AMDEPBACKSLASH@
-@AMDEP_TRUE@@am__fastdepCC_FALSE@ DEPDIR=$(DEPDIR) $(CCDEPMODE) $(depcomp) @AMDEPBACKSLASH@
-@am__fastdepCC_FALSE@ $(LIBTOOL) --tag=CC $(AM_LIBTOOLFLAGS) $(LIBTOOLFLAGS) --mode=compile $(CC) $(DEFS) $(DEFAULT_INCLUDES) $(INCLUDES) $(libcommon_la_CPPFLAGS) $(CPPFLAGS) $(AM_CFLAGS) $(CFLAGS) -c -o libcommon_la-vli_decoder.lo `test -f 'vli_decoder.c' || echo '$(srcdir)/'`vli_decoder.c
-
-mostlyclean-libtool:
- -rm -f *.lo
-
-clean-libtool:
- -rm -rf .libs _libs
-
-ID: $(HEADERS) $(SOURCES) $(LISP) $(TAGS_FILES)
- list='$(SOURCES) $(HEADERS) $(LISP) $(TAGS_FILES)'; \
- unique=`for i in $$list; do \
- if test -f "$$i"; then echo $$i; else echo $(srcdir)/$$i; fi; \
- done | \
- $(AWK) '{ files[$$0] = 1; nonempty = 1; } \
- END { if (nonempty) { for (i in files) print i; }; }'`; \
- mkid -fID $$unique
-tags: TAGS
-
-TAGS: $(HEADERS) $(SOURCES) $(TAGS_DEPENDENCIES) \
- $(TAGS_FILES) $(LISP)
- tags=; \
- here=`pwd`; \
- list='$(SOURCES) $(HEADERS) $(LISP) $(TAGS_FILES)'; \
- unique=`for i in $$list; do \
- if test -f "$$i"; then echo $$i; else echo $(srcdir)/$$i; fi; \
- done | \
- $(AWK) '{ files[$$0] = 1; nonempty = 1; } \
- END { if (nonempty) { for (i in files) print i; }; }'`; \
- if test -z "$(ETAGS_ARGS)$$tags$$unique"; then :; else \
- test -n "$$unique" || unique=$$empty_fix; \
- $(ETAGS) $(ETAGSFLAGS) $(AM_ETAGSFLAGS) $(ETAGS_ARGS) \
- $$tags $$unique; \
- fi
-ctags: CTAGS
-CTAGS: $(HEADERS) $(SOURCES) $(TAGS_DEPENDENCIES) \
- $(TAGS_FILES) $(LISP)
- tags=; \
- list='$(SOURCES) $(HEADERS) $(LISP) $(TAGS_FILES)'; \
- unique=`for i in $$list; do \
- if test -f "$$i"; then echo $$i; else echo $(srcdir)/$$i; fi; \
- done | \
- $(AWK) '{ files[$$0] = 1; nonempty = 1; } \
- END { if (nonempty) { for (i in files) print i; }; }'`; \
- test -z "$(CTAGS_ARGS)$$tags$$unique" \
- || $(CTAGS) $(CTAGSFLAGS) $(AM_CTAGSFLAGS) $(CTAGS_ARGS) \
- $$tags $$unique
-
-GTAGS:
- here=`$(am__cd) $(top_builddir) && pwd` \
- && cd $(top_srcdir) \
- && gtags -i $(GTAGS_ARGS) $$here
-
-distclean-tags:
- -rm -f TAGS ID GTAGS GRTAGS GSYMS GPATH tags
-
-distdir: $(DISTFILES)
- @srcdirstrip=`echo "$(srcdir)" | sed 's/[].[^$$\\*]/\\\\&/g'`; \
- topsrcdirstrip=`echo "$(top_srcdir)" | sed 's/[].[^$$\\*]/\\\\&/g'`; \
- list='$(DISTFILES)'; \
- dist_files=`for file in $$list; do echo $$file; done | \
- sed -e "s|^$$srcdirstrip/||;t" \
- -e "s|^$$topsrcdirstrip/|$(top_builddir)/|;t"`; \
- case $$dist_files in \
- */*) $(MKDIR_P) `echo "$$dist_files" | \
- sed '/\//!d;s|^|$(distdir)/|;s,/[^/]*$$,,' | \
- sort -u` ;; \
- esac; \
- for file in $$dist_files; do \
- if test -f $$file || test -d $$file; then d=.; else d=$(srcdir); fi; \
- if test -d $$d/$$file; then \
- dir=`echo "/$$file" | sed -e 's,/[^/]*$$,,'`; \
- if test -d $(srcdir)/$$file && test $$d != $(srcdir); then \
- cp -pR $(srcdir)/$$file $(distdir)$$dir || exit 1; \
- fi; \
- cp -pR $$d/$$file $(distdir)$$dir || exit 1; \
- else \
- test -f $(distdir)/$$file \
- || cp -p $$d/$$file $(distdir)/$$file \
- || exit 1; \
- fi; \
- done
-check-am: all-am
-check: check-am
-all-am: Makefile $(LTLIBRARIES)
-installdirs:
-install: install-am
-install-exec: install-exec-am
-install-data: install-data-am
-uninstall: uninstall-am
-
-install-am: all-am
- @$(MAKE) $(AM_MAKEFLAGS) install-exec-am install-data-am
-
-installcheck: installcheck-am
-install-strip:
- $(MAKE) $(AM_MAKEFLAGS) INSTALL_PROGRAM="$(INSTALL_STRIP_PROGRAM)" \
- install_sh_PROGRAM="$(INSTALL_STRIP_PROGRAM)" INSTALL_STRIP_FLAG=-s \
- `test -z '$(STRIP)' || \
- echo "INSTALL_PROGRAM_ENV=STRIPPROG='$(STRIP)'"` install
-mostlyclean-generic:
-
-clean-generic:
-
-distclean-generic:
- -test -z "$(CONFIG_CLEAN_FILES)" || rm -f $(CONFIG_CLEAN_FILES)
-
-maintainer-clean-generic:
- @echo "This command is intended for maintainers to use"
- @echo "it deletes files that may require special tools to rebuild."
-clean: clean-am
-
-clean-am: clean-generic clean-libtool clean-noinstLTLIBRARIES \
- mostlyclean-am
-
-distclean: distclean-am
- -rm -rf ./$(DEPDIR)
- -rm -f Makefile
-distclean-am: clean-am distclean-compile distclean-generic \
- distclean-tags
-
-dvi: dvi-am
-
-dvi-am:
-
-html: html-am
-
-info: info-am
-
-info-am:
-
-install-data-am:
-
-install-dvi: install-dvi-am
-
-install-exec-am:
-
-install-html: install-html-am
-
-install-info: install-info-am
-
-install-man:
-
-install-pdf: install-pdf-am
-
-install-ps: install-ps-am
-
-installcheck-am:
-
-maintainer-clean: maintainer-clean-am
- -rm -rf ./$(DEPDIR)
- -rm -f Makefile
-maintainer-clean-am: distclean-am maintainer-clean-generic
-
-mostlyclean: mostlyclean-am
-
-mostlyclean-am: mostlyclean-compile mostlyclean-generic \
- mostlyclean-libtool
-
-pdf: pdf-am
-
-pdf-am:
-
-ps: ps-am
-
-ps-am:
-
-uninstall-am:
-
-.MAKE: install-am install-strip
-
-.PHONY: CTAGS GTAGS all all-am check check-am clean clean-generic \
- clean-libtool clean-noinstLTLIBRARIES ctags distclean \
- distclean-compile distclean-generic distclean-libtool \
- distclean-tags distdir dvi dvi-am html html-am info info-am \
- install install-am install-data install-data-am install-dvi \
- install-dvi-am install-exec install-exec-am install-html \
- install-html-am install-info install-info-am install-man \
- install-pdf install-pdf-am install-ps install-ps-am \
- install-strip installcheck installcheck-am installdirs \
- maintainer-clean maintainer-clean-generic mostlyclean \
- mostlyclean-compile mostlyclean-generic mostlyclean-libtool \
- pdf pdf-am ps ps-am tags uninstall uninstall-am
-
-# Tell versions [3.59,3.63) of GNU make to not export all variables.
-# Otherwise a system limit (for SysV at least) may be exceeded.
-.NOEXPORT:
diff --git a/Build/source/utils/xz-4.999.8beta/src/liblzma/common/alone_decoder.h b/Build/source/utils/xz-4.999.8beta/src/liblzma/common/alone_decoder.h
deleted file mode 100644
index 13284043f3e..00000000000
--- a/Build/source/utils/xz-4.999.8beta/src/liblzma/common/alone_decoder.h
+++ /dev/null
@@ -1,29 +0,0 @@
-///////////////////////////////////////////////////////////////////////////////
-//
-/// \file alone_decoder.h
-/// \brief Decoder for LZMA_Alone files
-//
-// Copyright (C) 2007 Lasse Collin
-//
-// This library is free software; you can redistribute it and/or
-// modify it under the terms of the GNU Lesser General Public
-// License as published by the Free Software Foundation; either
-// version 2.1 of the License, or (at your option) any later version.
-//
-// This library is distributed in the hope that it will be useful,
-// but WITHOUT ANY WARRANTY; without even the implied warranty of
-// MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the GNU
-// Lesser General Public License for more details.
-//
-///////////////////////////////////////////////////////////////////////////////
-
-#ifndef LZMA_ALONE_DECODER_H
-#define LZMA_ALONE_DECODER_H
-
-#include "common.h"
-
-
-extern lzma_ret lzma_alone_decoder_init(lzma_next_coder *next,
- lzma_allocator *allocator, uint64_t memlimit);
-
-#endif
diff --git a/Build/source/utils/xz-4.999.8beta/src/liblzma/common/block_decoder.h b/Build/source/utils/xz-4.999.8beta/src/liblzma/common/block_decoder.h
deleted file mode 100644
index e16bffdb38e..00000000000
--- a/Build/source/utils/xz-4.999.8beta/src/liblzma/common/block_decoder.h
+++ /dev/null
@@ -1,29 +0,0 @@
-///////////////////////////////////////////////////////////////////////////////
-//
-/// \file block_decoder.h
-/// \brief Decodes .xz Blocks
-//
-// Copyright (C) 2007 Lasse Collin
-//
-// This library is free software; you can redistribute it and/or
-// modify it under the terms of the GNU Lesser General Public
-// License as published by the Free Software Foundation; either
-// version 2.1 of the License, or (at your option) any later version.
-//
-// This library is distributed in the hope that it will be useful,
-// but WITHOUT ANY WARRANTY; without even the implied warranty of
-// MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the GNU
-// Lesser General Public License for more details.
-//
-///////////////////////////////////////////////////////////////////////////////
-
-#ifndef LZMA_BLOCK_DECODER_H
-#define LZMA_BLOCK_DECODER_H
-
-#include "common.h"
-
-
-extern lzma_ret lzma_block_decoder_init(lzma_next_coder *next,
- lzma_allocator *allocator, lzma_block *block);
-
-#endif
diff --git a/Build/source/utils/xz-4.999.8beta/src/liblzma/common/filter_decoder.h b/Build/source/utils/xz-4.999.8beta/src/liblzma/common/filter_decoder.h
deleted file mode 100644
index 6d651e69bd9..00000000000
--- a/Build/source/utils/xz-4.999.8beta/src/liblzma/common/filter_decoder.h
+++ /dev/null
@@ -1,30 +0,0 @@
-///////////////////////////////////////////////////////////////////////////////
-//
-/// \file filter_decoder.c
-/// \brief Filter ID mapping to filter-specific functions
-//
-// Copyright (C) 2008 Lasse Collin
-//
-// This library is free software; you can redistribute it and/or
-// modify it under the terms of the GNU Lesser General Public
-// License as published by the Free Software Foundation; either
-// version 2.1 of the License, or (at your option) any later version.
-//
-// This library is distributed in the hope that it will be useful,
-// but WITHOUT ANY WARRANTY; without even the implied warranty of
-// MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the GNU
-// Lesser General Public License for more details.
-//
-///////////////////////////////////////////////////////////////////////////////
-
-#ifndef LZMA_FILTER_DECODER_H
-#define LZMA_FILTER_DECODER_H
-
-#include "common.h"
-
-
-extern lzma_ret lzma_raw_decoder_init(
- lzma_next_coder *next, lzma_allocator *allocator,
- const lzma_filter *options);
-
-#endif
diff --git a/Build/source/utils/xz-4.999.8beta/src/liblzma/common/index_encoder.h b/Build/source/utils/xz-4.999.8beta/src/liblzma/common/index_encoder.h
deleted file mode 100644
index 0087c2847d2..00000000000
--- a/Build/source/utils/xz-4.999.8beta/src/liblzma/common/index_encoder.h
+++ /dev/null
@@ -1,30 +0,0 @@
-///////////////////////////////////////////////////////////////////////////////
-//
-/// \file index_encoder.h
-/// \brief Encodes the Index field
-//
-// Copyright (C) 2008 Lasse Collin
-//
-// This library is free software; you can redistribute it and/or
-// modify it under the terms of the GNU Lesser General Public
-// License as published by the Free Software Foundation; either
-// version 2.1 of the License, or (at your option) any later version.
-//
-// This library is distributed in the hope that it will be useful,
-// but WITHOUT ANY WARRANTY; without even the implied warranty of
-// MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the GNU
-// Lesser General Public License for more details.
-//
-///////////////////////////////////////////////////////////////////////////////
-
-#ifndef LZMA_INDEX_ENCODER_H
-#define LZMA_INDEX_ENCODER_H
-
-#include "common.h"
-
-
-extern lzma_ret lzma_index_encoder_init(lzma_next_coder *next,
- lzma_allocator *allocator, lzma_index *i);
-
-
-#endif
diff --git a/Build/source/utils/xz-4.999.8beta/src/liblzma/common/stream_decoder.h b/Build/source/utils/xz-4.999.8beta/src/liblzma/common/stream_decoder.h
deleted file mode 100644
index b12e21d6295..00000000000
--- a/Build/source/utils/xz-4.999.8beta/src/liblzma/common/stream_decoder.h
+++ /dev/null
@@ -1,28 +0,0 @@
-///////////////////////////////////////////////////////////////////////////////
-//
-/// \file stream_decoder.h
-/// \brief Decodes .xz Streams
-//
-// Copyright (C) 2008 Lasse Collin
-//
-// This library is free software; you can redistribute it and/or
-// modify it under the terms of the GNU Lesser General Public
-// License as published by the Free Software Foundation; either
-// version 2.1 of the License, or (at your option) any later version.
-//
-// This library is distributed in the hope that it will be useful,
-// but WITHOUT ANY WARRANTY; without even the implied warranty of
-// MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the GNU
-// Lesser General Public License for more details.
-//
-///////////////////////////////////////////////////////////////////////////////
-
-#ifndef LZMA_STREAM_DECODER_H
-#define LZMA_STREAM_DECODER_H
-
-#include "common.h"
-
-extern lzma_ret lzma_stream_decoder_init(lzma_next_coder *next,
- lzma_allocator *allocator, uint64_t memlimit, uint32_t flags);
-
-#endif
diff --git a/Build/source/utils/xz-4.999.8beta/src/liblzma/common/stream_encoder.h b/Build/source/utils/xz-4.999.8beta/src/liblzma/common/stream_encoder.h
deleted file mode 100644
index 97ef83e9216..00000000000
--- a/Build/source/utils/xz-4.999.8beta/src/liblzma/common/stream_encoder.h
+++ /dev/null
@@ -1,30 +0,0 @@
-///////////////////////////////////////////////////////////////////////////////
-//
-/// \file stream_encoder.h
-/// \brief Encodes .xz Streams
-//
-// Copyright (C) 2008 Lasse Collin
-//
-// This library is free software; you can redistribute it and/or
-// modify it under the terms of the GNU Lesser General Public
-// License as published by the Free Software Foundation; either
-// version 2.1 of the License, or (at your option) any later version.
-//
-// This library is distributed in the hope that it will be useful,
-// but WITHOUT ANY WARRANTY; without even the implied warranty of
-// MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the GNU
-// Lesser General Public License for more details.
-//
-///////////////////////////////////////////////////////////////////////////////
-
-#ifndef LZMA_STREAM_ENCODER_H
-#define LZMA_STREAM_ENCODER_H
-
-#include "common.h"
-
-
-extern lzma_ret lzma_stream_encoder_init(
- lzma_next_coder *next, lzma_allocator *allocator,
- const lzma_filter *filters, lzma_check check);
-
-#endif
diff --git a/Build/source/utils/xz-4.999.8beta/src/liblzma/common/vli_size.c b/Build/source/utils/xz-4.999.8beta/src/liblzma/common/vli_size.c
deleted file mode 100644
index dfdceecd7df..00000000000
--- a/Build/source/utils/xz-4.999.8beta/src/liblzma/common/vli_size.c
+++ /dev/null
@@ -1,37 +0,0 @@
-///////////////////////////////////////////////////////////////////////////////
-//
-/// \file vli_size.c
-/// \brief Calculates the encoded size of a variable-length integer
-//
-// Copyright (C) 2007-2008 Lasse Collin
-//
-// This library is free software; you can redistribute it and/or
-// modify it under the terms of the GNU Lesser General Public
-// License as published by the Free Software Foundation; either
-// version 2.1 of the License, or (at your option) any later version.
-//
-// This library is distributed in the hope that it will be useful,
-// but WITHOUT ANY WARRANTY; without even the implied warranty of
-// MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the GNU
-// Lesser General Public License for more details.
-//
-///////////////////////////////////////////////////////////////////////////////
-
-#include "common.h"
-
-
-extern LZMA_API(uint32_t)
-lzma_vli_size(lzma_vli vli)
-{
- if (vli > LZMA_VLI_MAX)
- return 0;
-
- uint32_t i = 0;
- do {
- vli >>= 7;
- ++i;
- } while (vli != 0);
-
- assert(i <= LZMA_VLI_BYTES_MAX);
- return i;
-}
diff --git a/Build/source/utils/xz-4.999.8beta/src/liblzma/delta/Makefile.am b/Build/source/utils/xz-4.999.8beta/src/liblzma/delta/Makefile.am
deleted file mode 100644
index 899d9bc0982..00000000000
--- a/Build/source/utils/xz-4.999.8beta/src/liblzma/delta/Makefile.am
+++ /dev/null
@@ -1,35 +0,0 @@
-##
-## Copyright (C) 2008 Lasse Collin
-##
-## This library is free software; you can redistribute it and/or
-## modify it under the terms of the GNU Lesser General Public
-## License as published by the Free Software Foundation; either
-## version 2.1 of the License, or (at your option) any later version.
-##
-## This library is distributed in the hope that it will be useful,
-## but WITHOUT ANY WARRANTY; without even the implied warranty of
-## MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the GNU
-## Lesser General Public License for more details.
-##
-
-noinst_LTLIBRARIES = libdelta.la
-libdelta_la_CPPFLAGS = \
- -I@top_srcdir@/src/liblzma/api \
- -I@top_srcdir@/src/liblzma/common
-
-libdelta_la_SOURCES = \
- delta_common.c \
- delta_common.h \
- delta_private.h
-
-if COND_ENCODER_DELTA
-libdelta_la_SOURCES += \
- delta_encoder.c \
- delta_encoder.h
-endif
-
-if COND_DECODER_DELTA
-libdelta_la_SOURCES += \
- delta_decoder.c \
- delta_decoder.h
-endif
diff --git a/Build/source/utils/xz-4.999.8beta/src/liblzma/delta/Makefile.in b/Build/source/utils/xz-4.999.8beta/src/liblzma/delta/Makefile.in
deleted file mode 100644
index 96d9c87df6a..00000000000
--- a/Build/source/utils/xz-4.999.8beta/src/liblzma/delta/Makefile.in
+++ /dev/null
@@ -1,505 +0,0 @@
-# Makefile.in generated by automake 1.10.2 from Makefile.am.
-# @configure_input@
-
-# Copyright (C) 1994, 1995, 1996, 1997, 1998, 1999, 2000, 2001, 2002,
-# 2003, 2004, 2005, 2006, 2007, 2008 Free Software Foundation, Inc.
-# This Makefile.in is free software; the Free Software Foundation
-# gives unlimited permission to copy and/or distribute it,
-# with or without modifications, as long as this notice is preserved.
-
-# This program is distributed in the hope that it will be useful,
-# but WITHOUT ANY WARRANTY, to the extent permitted by law; without
-# even the implied warranty of MERCHANTABILITY or FITNESS FOR A
-# PARTICULAR PURPOSE.
-
-@SET_MAKE@
-
-VPATH = @srcdir@
-pkgdatadir = $(datadir)/@PACKAGE@
-pkglibdir = $(libdir)/@PACKAGE@
-pkgincludedir = $(includedir)/@PACKAGE@
-am__cd = CDPATH="$${ZSH_VERSION+.}$(PATH_SEPARATOR)" && cd
-install_sh_DATA = $(install_sh) -c -m 644
-install_sh_PROGRAM = $(install_sh) -c
-install_sh_SCRIPT = $(install_sh) -c
-INSTALL_HEADER = $(INSTALL_DATA)
-transform = $(program_transform_name)
-NORMAL_INSTALL = :
-PRE_INSTALL = :
-POST_INSTALL = :
-NORMAL_UNINSTALL = :
-PRE_UNINSTALL = :
-POST_UNINSTALL = :
-build_triplet = @build@
-host_triplet = @host@
-@COND_ENCODER_DELTA_TRUE@am__append_1 = \
-@COND_ENCODER_DELTA_TRUE@ delta_encoder.c \
-@COND_ENCODER_DELTA_TRUE@ delta_encoder.h
-
-@COND_DECODER_DELTA_TRUE@am__append_2 = \
-@COND_DECODER_DELTA_TRUE@ delta_decoder.c \
-@COND_DECODER_DELTA_TRUE@ delta_decoder.h
-
-subdir = src/liblzma/delta
-DIST_COMMON = $(srcdir)/Makefile.am $(srcdir)/Makefile.in
-ACLOCAL_M4 = $(top_srcdir)/aclocal.m4
-am__aclocal_m4_deps = $(top_srcdir)/m4/acx_pthread.m4 \
- $(top_srcdir)/m4/getopt.m4 $(top_srcdir)/m4/gettext.m4 \
- $(top_srcdir)/m4/iconv.m4 $(top_srcdir)/m4/lib-ld.m4 \
- $(top_srcdir)/m4/lib-link.m4 $(top_srcdir)/m4/lib-prefix.m4 \
- $(top_srcdir)/m4/nls.m4 $(top_srcdir)/m4/po.m4 \
- $(top_srcdir)/m4/progtest.m4 $(top_srcdir)/configure.ac
-am__configure_deps = $(am__aclocal_m4_deps) $(CONFIGURE_DEPENDENCIES) \
- $(ACLOCAL_M4)
-mkinstalldirs = $(install_sh) -d
-CONFIG_HEADER = $(top_builddir)/config.h
-CONFIG_CLEAN_FILES =
-LTLIBRARIES = $(noinst_LTLIBRARIES)
-libdelta_la_LIBADD =
-am__libdelta_la_SOURCES_DIST = delta_common.c delta_common.h \
- delta_private.h delta_encoder.c delta_encoder.h \
- delta_decoder.c delta_decoder.h
-@COND_ENCODER_DELTA_TRUE@am__objects_1 = libdelta_la-delta_encoder.lo
-@COND_DECODER_DELTA_TRUE@am__objects_2 = libdelta_la-delta_decoder.lo
-am_libdelta_la_OBJECTS = libdelta_la-delta_common.lo $(am__objects_1) \
- $(am__objects_2)
-libdelta_la_OBJECTS = $(am_libdelta_la_OBJECTS)
-DEFAULT_INCLUDES = -I.@am__isrc@ -I$(top_builddir)
-depcomp = $(SHELL) $(top_srcdir)/depcomp
-am__depfiles_maybe = depfiles
-COMPILE = $(CC) $(DEFS) $(DEFAULT_INCLUDES) $(INCLUDES) $(AM_CPPFLAGS) \
- $(CPPFLAGS) $(AM_CFLAGS) $(CFLAGS)
-LTCOMPILE = $(LIBTOOL) --tag=CC $(AM_LIBTOOLFLAGS) $(LIBTOOLFLAGS) \
- --mode=compile $(CC) $(DEFS) $(DEFAULT_INCLUDES) $(INCLUDES) \
- $(AM_CPPFLAGS) $(CPPFLAGS) $(AM_CFLAGS) $(CFLAGS)
-CCLD = $(CC)
-LINK = $(LIBTOOL) --tag=CC $(AM_LIBTOOLFLAGS) $(LIBTOOLFLAGS) \
- --mode=link $(CCLD) $(AM_CFLAGS) $(CFLAGS) $(AM_LDFLAGS) \
- $(LDFLAGS) -o $@
-SOURCES = $(libdelta_la_SOURCES)
-DIST_SOURCES = $(am__libdelta_la_SOURCES_DIST)
-ETAGS = etags
-CTAGS = ctags
-DISTFILES = $(DIST_COMMON) $(DIST_SOURCES) $(TEXINFOS) $(EXTRA_DIST)
-ACLOCAL = @ACLOCAL@
-AMTAR = @AMTAR@
-AR = @AR@
-AUTOCONF = @AUTOCONF@
-AUTOHEADER = @AUTOHEADER@
-AUTOMAKE = @AUTOMAKE@
-AWK = @AWK@
-CC = @CC@
-CCAS = @CCAS@
-CCASDEPMODE = @CCASDEPMODE@
-CCASFLAGS = @CCASFLAGS@
-CCDEPMODE = @CCDEPMODE@
-CFLAGS = @CFLAGS@
-CFLAG_VISIBILITY = @CFLAG_VISIBILITY@
-CPP = @CPP@
-CPPFLAGS = @CPPFLAGS@
-CXX = @CXX@
-CXXCPP = @CXXCPP@
-CXXDEPMODE = @CXXDEPMODE@
-CXXFLAGS = @CXXFLAGS@
-CYGPATH_W = @CYGPATH_W@
-DEFS = @DEFS@
-DEPDIR = @DEPDIR@
-DSYMUTIL = @DSYMUTIL@
-ECHO = @ECHO@
-ECHO_C = @ECHO_C@
-ECHO_N = @ECHO_N@
-ECHO_T = @ECHO_T@
-EGREP = @EGREP@
-EXEEXT = @EXEEXT@
-F77 = @F77@
-FFLAGS = @FFLAGS@
-GETOPT_H = @GETOPT_H@
-GMSGFMT = @GMSGFMT@
-GMSGFMT_015 = @GMSGFMT_015@
-GREP = @GREP@
-HAVE_VISIBILITY = @HAVE_VISIBILITY@
-INSTALL = @INSTALL@
-INSTALL_DATA = @INSTALL_DATA@
-INSTALL_PROGRAM = @INSTALL_PROGRAM@
-INSTALL_SCRIPT = @INSTALL_SCRIPT@
-INSTALL_STRIP_PROGRAM = @INSTALL_STRIP_PROGRAM@
-INTLLIBS = @INTLLIBS@
-INTL_MACOSX_LIBS = @INTL_MACOSX_LIBS@
-LDFLAGS = @LDFLAGS@
-LIBICONV = @LIBICONV@
-LIBINTL = @LIBINTL@
-LIBOBJS = @LIBOBJS@
-LIBS = @LIBS@
-LIBTOOL = @LIBTOOL@
-LN_S = @LN_S@
-LTLIBICONV = @LTLIBICONV@
-LTLIBINTL = @LTLIBINTL@
-LTLIBOBJS = @LTLIBOBJS@
-MAKEINFO = @MAKEINFO@
-MKDIR_P = @MKDIR_P@
-MSGFMT = @MSGFMT@
-MSGFMT_015 = @MSGFMT_015@
-MSGMERGE = @MSGMERGE@
-NMEDIT = @NMEDIT@
-OBJEXT = @OBJEXT@
-PACKAGE = @PACKAGE@
-PACKAGE_BUGREPORT = @PACKAGE_BUGREPORT@
-PACKAGE_NAME = @PACKAGE_NAME@
-PACKAGE_STRING = @PACKAGE_STRING@
-PACKAGE_TARNAME = @PACKAGE_TARNAME@
-PACKAGE_VERSION = @PACKAGE_VERSION@
-PATH_SEPARATOR = @PATH_SEPARATOR@
-POSUB = @POSUB@
-PTHREAD_CC = @PTHREAD_CC@
-PTHREAD_CFLAGS = @PTHREAD_CFLAGS@
-PTHREAD_LIBS = @PTHREAD_LIBS@
-RANLIB = @RANLIB@
-SED = @SED@
-SET_MAKE = @SET_MAKE@
-SHELL = @SHELL@
-STRIP = @STRIP@
-USE_NLS = @USE_NLS@
-VERSION = @VERSION@
-XGETTEXT = @XGETTEXT@
-XGETTEXT_015 = @XGETTEXT_015@
-abs_builddir = @abs_builddir@
-abs_srcdir = @abs_srcdir@
-abs_top_builddir = @abs_top_builddir@
-abs_top_srcdir = @abs_top_srcdir@
-ac_ct_CC = @ac_ct_CC@
-ac_ct_CXX = @ac_ct_CXX@
-ac_ct_F77 = @ac_ct_F77@
-acx_pthread_config = @acx_pthread_config@
-am__include = @am__include@
-am__leading_dot = @am__leading_dot@
-am__quote = @am__quote@
-am__tar = @am__tar@
-am__untar = @am__untar@
-bindir = @bindir@
-build = @build@
-build_alias = @build_alias@
-build_cpu = @build_cpu@
-build_os = @build_os@
-build_vendor = @build_vendor@
-builddir = @builddir@
-datadir = @datadir@
-datarootdir = @datarootdir@
-docdir = @docdir@
-dvidir = @dvidir@
-exec_prefix = @exec_prefix@
-host = @host@
-host_alias = @host_alias@
-host_cpu = @host_cpu@
-host_os = @host_os@
-host_vendor = @host_vendor@
-htmldir = @htmldir@
-includedir = @includedir@
-infodir = @infodir@
-install_sh = @install_sh@
-libdir = @libdir@
-libexecdir = @libexecdir@
-localedir = @localedir@
-localstatedir = @localstatedir@
-mandir = @mandir@
-mkdir_p = @mkdir_p@
-oldincludedir = @oldincludedir@
-pdfdir = @pdfdir@
-prefix = @prefix@
-program_transform_name = @program_transform_name@
-psdir = @psdir@
-sbindir = @sbindir@
-sharedstatedir = @sharedstatedir@
-srcdir = @srcdir@
-sysconfdir = @sysconfdir@
-target_alias = @target_alias@
-top_build_prefix = @top_build_prefix@
-top_builddir = @top_builddir@
-top_srcdir = @top_srcdir@
-noinst_LTLIBRARIES = libdelta.la
-libdelta_la_CPPFLAGS = \
- -I@top_srcdir@/src/liblzma/api \
- -I@top_srcdir@/src/liblzma/common
-
-libdelta_la_SOURCES = delta_common.c delta_common.h delta_private.h \
- $(am__append_1) $(am__append_2)
-all: all-am
-
-.SUFFIXES:
-.SUFFIXES: .c .lo .o .obj
-$(srcdir)/Makefile.in: $(srcdir)/Makefile.am $(am__configure_deps)
- @for dep in $?; do \
- case '$(am__configure_deps)' in \
- *$$dep*) \
- ( cd $(top_builddir) && $(MAKE) $(AM_MAKEFLAGS) am--refresh ) \
- && { if test -f $@; then exit 0; else break; fi; }; \
- exit 1;; \
- esac; \
- done; \
- echo ' cd $(top_srcdir) && $(AUTOMAKE) --foreign src/liblzma/delta/Makefile'; \
- cd $(top_srcdir) && \
- $(AUTOMAKE) --foreign src/liblzma/delta/Makefile
-.PRECIOUS: Makefile
-Makefile: $(srcdir)/Makefile.in $(top_builddir)/config.status
- @case '$?' in \
- *config.status*) \
- cd $(top_builddir) && $(MAKE) $(AM_MAKEFLAGS) am--refresh;; \
- *) \
- echo ' cd $(top_builddir) && $(SHELL) ./config.status $(subdir)/$@ $(am__depfiles_maybe)'; \
- cd $(top_builddir) && $(SHELL) ./config.status $(subdir)/$@ $(am__depfiles_maybe);; \
- esac;
-
-$(top_builddir)/config.status: $(top_srcdir)/configure $(CONFIG_STATUS_DEPENDENCIES)
- cd $(top_builddir) && $(MAKE) $(AM_MAKEFLAGS) am--refresh
-
-$(top_srcdir)/configure: $(am__configure_deps)
- cd $(top_builddir) && $(MAKE) $(AM_MAKEFLAGS) am--refresh
-$(ACLOCAL_M4): $(am__aclocal_m4_deps)
- cd $(top_builddir) && $(MAKE) $(AM_MAKEFLAGS) am--refresh
-
-clean-noinstLTLIBRARIES:
- -test -z "$(noinst_LTLIBRARIES)" || rm -f $(noinst_LTLIBRARIES)
- @list='$(noinst_LTLIBRARIES)'; for p in $$list; do \
- dir="`echo $$p | sed -e 's|/[^/]*$$||'`"; \
- test "$$dir" != "$$p" || dir=.; \
- echo "rm -f \"$${dir}/so_locations\""; \
- rm -f "$${dir}/so_locations"; \
- done
-libdelta.la: $(libdelta_la_OBJECTS) $(libdelta_la_DEPENDENCIES)
- $(LINK) $(libdelta_la_OBJECTS) $(libdelta_la_LIBADD) $(LIBS)
-
-mostlyclean-compile:
- -rm -f *.$(OBJEXT)
-
-distclean-compile:
- -rm -f *.tab.c
-
-@AMDEP_TRUE@@am__include@ @am__quote@./$(DEPDIR)/libdelta_la-delta_common.Plo@am__quote@
-@AMDEP_TRUE@@am__include@ @am__quote@./$(DEPDIR)/libdelta_la-delta_decoder.Plo@am__quote@
-@AMDEP_TRUE@@am__include@ @am__quote@./$(DEPDIR)/libdelta_la-delta_encoder.Plo@am__quote@
-
-.c.o:
-@am__fastdepCC_TRUE@ $(COMPILE) -MT $@ -MD -MP -MF $(DEPDIR)/$*.Tpo -c -o $@ $<
-@am__fastdepCC_TRUE@ mv -f $(DEPDIR)/$*.Tpo $(DEPDIR)/$*.Po
-@AMDEP_TRUE@@am__fastdepCC_FALSE@ source='$<' object='$@' libtool=no @AMDEPBACKSLASH@
-@AMDEP_TRUE@@am__fastdepCC_FALSE@ DEPDIR=$(DEPDIR) $(CCDEPMODE) $(depcomp) @AMDEPBACKSLASH@
-@am__fastdepCC_FALSE@ $(COMPILE) -c $<
-
-.c.obj:
-@am__fastdepCC_TRUE@ $(COMPILE) -MT $@ -MD -MP -MF $(DEPDIR)/$*.Tpo -c -o $@ `$(CYGPATH_W) '$<'`
-@am__fastdepCC_TRUE@ mv -f $(DEPDIR)/$*.Tpo $(DEPDIR)/$*.Po
-@AMDEP_TRUE@@am__fastdepCC_FALSE@ source='$<' object='$@' libtool=no @AMDEPBACKSLASH@
-@AMDEP_TRUE@@am__fastdepCC_FALSE@ DEPDIR=$(DEPDIR) $(CCDEPMODE) $(depcomp) @AMDEPBACKSLASH@
-@am__fastdepCC_FALSE@ $(COMPILE) -c `$(CYGPATH_W) '$<'`
-
-.c.lo:
-@am__fastdepCC_TRUE@ $(LTCOMPILE) -MT $@ -MD -MP -MF $(DEPDIR)/$*.Tpo -c -o $@ $<
-@am__fastdepCC_TRUE@ mv -f $(DEPDIR)/$*.Tpo $(DEPDIR)/$*.Plo
-@AMDEP_TRUE@@am__fastdepCC_FALSE@ source='$<' object='$@' libtool=yes @AMDEPBACKSLASH@
-@AMDEP_TRUE@@am__fastdepCC_FALSE@ DEPDIR=$(DEPDIR) $(CCDEPMODE) $(depcomp) @AMDEPBACKSLASH@
-@am__fastdepCC_FALSE@ $(LTCOMPILE) -c -o $@ $<
-
-libdelta_la-delta_common.lo: delta_common.c
-@am__fastdepCC_TRUE@ $(LIBTOOL) --tag=CC $(AM_LIBTOOLFLAGS) $(LIBTOOLFLAGS) --mode=compile $(CC) $(DEFS) $(DEFAULT_INCLUDES) $(INCLUDES) $(libdelta_la_CPPFLAGS) $(CPPFLAGS) $(AM_CFLAGS) $(CFLAGS) -MT libdelta_la-delta_common.lo -MD -MP -MF $(DEPDIR)/libdelta_la-delta_common.Tpo -c -o libdelta_la-delta_common.lo `test -f 'delta_common.c' || echo '$(srcdir)/'`delta_common.c
-@am__fastdepCC_TRUE@ mv -f $(DEPDIR)/libdelta_la-delta_common.Tpo $(DEPDIR)/libdelta_la-delta_common.Plo
-@AMDEP_TRUE@@am__fastdepCC_FALSE@ source='delta_common.c' object='libdelta_la-delta_common.lo' libtool=yes @AMDEPBACKSLASH@
-@AMDEP_TRUE@@am__fastdepCC_FALSE@ DEPDIR=$(DEPDIR) $(CCDEPMODE) $(depcomp) @AMDEPBACKSLASH@
-@am__fastdepCC_FALSE@ $(LIBTOOL) --tag=CC $(AM_LIBTOOLFLAGS) $(LIBTOOLFLAGS) --mode=compile $(CC) $(DEFS) $(DEFAULT_INCLUDES) $(INCLUDES) $(libdelta_la_CPPFLAGS) $(CPPFLAGS) $(AM_CFLAGS) $(CFLAGS) -c -o libdelta_la-delta_common.lo `test -f 'delta_common.c' || echo '$(srcdir)/'`delta_common.c
-
-libdelta_la-delta_encoder.lo: delta_encoder.c
-@am__fastdepCC_TRUE@ $(LIBTOOL) --tag=CC $(AM_LIBTOOLFLAGS) $(LIBTOOLFLAGS) --mode=compile $(CC) $(DEFS) $(DEFAULT_INCLUDES) $(INCLUDES) $(libdelta_la_CPPFLAGS) $(CPPFLAGS) $(AM_CFLAGS) $(CFLAGS) -MT libdelta_la-delta_encoder.lo -MD -MP -MF $(DEPDIR)/libdelta_la-delta_encoder.Tpo -c -o libdelta_la-delta_encoder.lo `test -f 'delta_encoder.c' || echo '$(srcdir)/'`delta_encoder.c
-@am__fastdepCC_TRUE@ mv -f $(DEPDIR)/libdelta_la-delta_encoder.Tpo $(DEPDIR)/libdelta_la-delta_encoder.Plo
-@AMDEP_TRUE@@am__fastdepCC_FALSE@ source='delta_encoder.c' object='libdelta_la-delta_encoder.lo' libtool=yes @AMDEPBACKSLASH@
-@AMDEP_TRUE@@am__fastdepCC_FALSE@ DEPDIR=$(DEPDIR) $(CCDEPMODE) $(depcomp) @AMDEPBACKSLASH@
-@am__fastdepCC_FALSE@ $(LIBTOOL) --tag=CC $(AM_LIBTOOLFLAGS) $(LIBTOOLFLAGS) --mode=compile $(CC) $(DEFS) $(DEFAULT_INCLUDES) $(INCLUDES) $(libdelta_la_CPPFLAGS) $(CPPFLAGS) $(AM_CFLAGS) $(CFLAGS) -c -o libdelta_la-delta_encoder.lo `test -f 'delta_encoder.c' || echo '$(srcdir)/'`delta_encoder.c
-
-libdelta_la-delta_decoder.lo: delta_decoder.c
-@am__fastdepCC_TRUE@ $(LIBTOOL) --tag=CC $(AM_LIBTOOLFLAGS) $(LIBTOOLFLAGS) --mode=compile $(CC) $(DEFS) $(DEFAULT_INCLUDES) $(INCLUDES) $(libdelta_la_CPPFLAGS) $(CPPFLAGS) $(AM_CFLAGS) $(CFLAGS) -MT libdelta_la-delta_decoder.lo -MD -MP -MF $(DEPDIR)/libdelta_la-delta_decoder.Tpo -c -o libdelta_la-delta_decoder.lo `test -f 'delta_decoder.c' || echo '$(srcdir)/'`delta_decoder.c
-@am__fastdepCC_TRUE@ mv -f $(DEPDIR)/libdelta_la-delta_decoder.Tpo $(DEPDIR)/libdelta_la-delta_decoder.Plo
-@AMDEP_TRUE@@am__fastdepCC_FALSE@ source='delta_decoder.c' object='libdelta_la-delta_decoder.lo' libtool=yes @AMDEPBACKSLASH@
-@AMDEP_TRUE@@am__fastdepCC_FALSE@ DEPDIR=$(DEPDIR) $(CCDEPMODE) $(depcomp) @AMDEPBACKSLASH@
-@am__fastdepCC_FALSE@ $(LIBTOOL) --tag=CC $(AM_LIBTOOLFLAGS) $(LIBTOOLFLAGS) --mode=compile $(CC) $(DEFS) $(DEFAULT_INCLUDES) $(INCLUDES) $(libdelta_la_CPPFLAGS) $(CPPFLAGS) $(AM_CFLAGS) $(CFLAGS) -c -o libdelta_la-delta_decoder.lo `test -f 'delta_decoder.c' || echo '$(srcdir)/'`delta_decoder.c
-
-mostlyclean-libtool:
- -rm -f *.lo
-
-clean-libtool:
- -rm -rf .libs _libs
-
-ID: $(HEADERS) $(SOURCES) $(LISP) $(TAGS_FILES)
- list='$(SOURCES) $(HEADERS) $(LISP) $(TAGS_FILES)'; \
- unique=`for i in $$list; do \
- if test -f "$$i"; then echo $$i; else echo $(srcdir)/$$i; fi; \
- done | \
- $(AWK) '{ files[$$0] = 1; nonempty = 1; } \
- END { if (nonempty) { for (i in files) print i; }; }'`; \
- mkid -fID $$unique
-tags: TAGS
-
-TAGS: $(HEADERS) $(SOURCES) $(TAGS_DEPENDENCIES) \
- $(TAGS_FILES) $(LISP)
- tags=; \
- here=`pwd`; \
- list='$(SOURCES) $(HEADERS) $(LISP) $(TAGS_FILES)'; \
- unique=`for i in $$list; do \
- if test -f "$$i"; then echo $$i; else echo $(srcdir)/$$i; fi; \
- done | \
- $(AWK) '{ files[$$0] = 1; nonempty = 1; } \
- END { if (nonempty) { for (i in files) print i; }; }'`; \
- if test -z "$(ETAGS_ARGS)$$tags$$unique"; then :; else \
- test -n "$$unique" || unique=$$empty_fix; \
- $(ETAGS) $(ETAGSFLAGS) $(AM_ETAGSFLAGS) $(ETAGS_ARGS) \
- $$tags $$unique; \
- fi
-ctags: CTAGS
-CTAGS: $(HEADERS) $(SOURCES) $(TAGS_DEPENDENCIES) \
- $(TAGS_FILES) $(LISP)
- tags=; \
- list='$(SOURCES) $(HEADERS) $(LISP) $(TAGS_FILES)'; \
- unique=`for i in $$list; do \
- if test -f "$$i"; then echo $$i; else echo $(srcdir)/$$i; fi; \
- done | \
- $(AWK) '{ files[$$0] = 1; nonempty = 1; } \
- END { if (nonempty) { for (i in files) print i; }; }'`; \
- test -z "$(CTAGS_ARGS)$$tags$$unique" \
- || $(CTAGS) $(CTAGSFLAGS) $(AM_CTAGSFLAGS) $(CTAGS_ARGS) \
- $$tags $$unique
-
-GTAGS:
- here=`$(am__cd) $(top_builddir) && pwd` \
- && cd $(top_srcdir) \
- && gtags -i $(GTAGS_ARGS) $$here
-
-distclean-tags:
- -rm -f TAGS ID GTAGS GRTAGS GSYMS GPATH tags
-
-distdir: $(DISTFILES)
- @srcdirstrip=`echo "$(srcdir)" | sed 's/[].[^$$\\*]/\\\\&/g'`; \
- topsrcdirstrip=`echo "$(top_srcdir)" | sed 's/[].[^$$\\*]/\\\\&/g'`; \
- list='$(DISTFILES)'; \
- dist_files=`for file in $$list; do echo $$file; done | \
- sed -e "s|^$$srcdirstrip/||;t" \
- -e "s|^$$topsrcdirstrip/|$(top_builddir)/|;t"`; \
- case $$dist_files in \
- */*) $(MKDIR_P) `echo "$$dist_files" | \
- sed '/\//!d;s|^|$(distdir)/|;s,/[^/]*$$,,' | \
- sort -u` ;; \
- esac; \
- for file in $$dist_files; do \
- if test -f $$file || test -d $$file; then d=.; else d=$(srcdir); fi; \
- if test -d $$d/$$file; then \
- dir=`echo "/$$file" | sed -e 's,/[^/]*$$,,'`; \
- if test -d $(srcdir)/$$file && test $$d != $(srcdir); then \
- cp -pR $(srcdir)/$$file $(distdir)$$dir || exit 1; \
- fi; \
- cp -pR $$d/$$file $(distdir)$$dir || exit 1; \
- else \
- test -f $(distdir)/$$file \
- || cp -p $$d/$$file $(distdir)/$$file \
- || exit 1; \
- fi; \
- done
-check-am: all-am
-check: check-am
-all-am: Makefile $(LTLIBRARIES)
-installdirs:
-install: install-am
-install-exec: install-exec-am
-install-data: install-data-am
-uninstall: uninstall-am
-
-install-am: all-am
- @$(MAKE) $(AM_MAKEFLAGS) install-exec-am install-data-am
-
-installcheck: installcheck-am
-install-strip:
- $(MAKE) $(AM_MAKEFLAGS) INSTALL_PROGRAM="$(INSTALL_STRIP_PROGRAM)" \
- install_sh_PROGRAM="$(INSTALL_STRIP_PROGRAM)" INSTALL_STRIP_FLAG=-s \
- `test -z '$(STRIP)' || \
- echo "INSTALL_PROGRAM_ENV=STRIPPROG='$(STRIP)'"` install
-mostlyclean-generic:
-
-clean-generic:
-
-distclean-generic:
- -test -z "$(CONFIG_CLEAN_FILES)" || rm -f $(CONFIG_CLEAN_FILES)
-
-maintainer-clean-generic:
- @echo "This command is intended for maintainers to use"
- @echo "it deletes files that may require special tools to rebuild."
-clean: clean-am
-
-clean-am: clean-generic clean-libtool clean-noinstLTLIBRARIES \
- mostlyclean-am
-
-distclean: distclean-am
- -rm -rf ./$(DEPDIR)
- -rm -f Makefile
-distclean-am: clean-am distclean-compile distclean-generic \
- distclean-tags
-
-dvi: dvi-am
-
-dvi-am:
-
-html: html-am
-
-info: info-am
-
-info-am:
-
-install-data-am:
-
-install-dvi: install-dvi-am
-
-install-exec-am:
-
-install-html: install-html-am
-
-install-info: install-info-am
-
-install-man:
-
-install-pdf: install-pdf-am
-
-install-ps: install-ps-am
-
-installcheck-am:
-
-maintainer-clean: maintainer-clean-am
- -rm -rf ./$(DEPDIR)
- -rm -f Makefile
-maintainer-clean-am: distclean-am maintainer-clean-generic
-
-mostlyclean: mostlyclean-am
-
-mostlyclean-am: mostlyclean-compile mostlyclean-generic \
- mostlyclean-libtool
-
-pdf: pdf-am
-
-pdf-am:
-
-ps: ps-am
-
-ps-am:
-
-uninstall-am:
-
-.MAKE: install-am install-strip
-
-.PHONY: CTAGS GTAGS all all-am check check-am clean clean-generic \
- clean-libtool clean-noinstLTLIBRARIES ctags distclean \
- distclean-compile distclean-generic distclean-libtool \
- distclean-tags distdir dvi dvi-am html html-am info info-am \
- install install-am install-data install-data-am install-dvi \
- install-dvi-am install-exec install-exec-am install-html \
- install-html-am install-info install-info-am install-man \
- install-pdf install-pdf-am install-ps install-ps-am \
- install-strip installcheck installcheck-am installdirs \
- maintainer-clean maintainer-clean-generic mostlyclean \
- mostlyclean-compile mostlyclean-generic mostlyclean-libtool \
- pdf pdf-am ps ps-am tags uninstall uninstall-am
-
-# Tell versions [3.59,3.63) of GNU make to not export all variables.
-# Otherwise a system limit (for SysV at least) may be exceeded.
-.NOEXPORT:
diff --git a/Build/source/utils/xz-4.999.8beta/src/liblzma/delta/delta_common.h b/Build/source/utils/xz-4.999.8beta/src/liblzma/delta/delta_common.h
deleted file mode 100644
index a01de5473d8..00000000000
--- a/Build/source/utils/xz-4.999.8beta/src/liblzma/delta/delta_common.h
+++ /dev/null
@@ -1,27 +0,0 @@
-///////////////////////////////////////////////////////////////////////////////
-//
-/// \file delta_common.h
-/// \brief Common stuff for Delta encoder and decoder
-//
-// Copyright (C) 2007 Lasse Collin
-//
-// This library is free software; you can redistribute it and/or
-// modify it under the terms of the GNU Lesser General Public
-// License as published by the Free Software Foundation; either
-// version 2.1 of the License, or (at your option) any later version.
-//
-// This library is distributed in the hope that it will be useful,
-// but WITHOUT ANY WARRANTY; without even the implied warranty of
-// MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the GNU
-// Lesser General Public License for more details.
-//
-///////////////////////////////////////////////////////////////////////////////
-
-#ifndef LZMA_DELTA_COMMON_H
-#define LZMA_DELTA_COMMON_H
-
-#include "common.h"
-
-extern uint64_t lzma_delta_coder_memusage(const void *options);
-
-#endif
diff --git a/Build/source/utils/xz-4.999.8beta/src/liblzma/delta/delta_encoder.h b/Build/source/utils/xz-4.999.8beta/src/liblzma/delta/delta_encoder.h
deleted file mode 100644
index a709d1caea4..00000000000
--- a/Build/source/utils/xz-4.999.8beta/src/liblzma/delta/delta_encoder.h
+++ /dev/null
@@ -1,30 +0,0 @@
-///////////////////////////////////////////////////////////////////////////////
-//
-/// \file delta_encoder.h
-/// \brief Delta filter encoder
-//
-// Copyright (C) 2007 Lasse Collin
-//
-// This library is free software; you can redistribute it and/or
-// modify it under the terms of the GNU Lesser General Public
-// License as published by the Free Software Foundation; either
-// version 2.1 of the License, or (at your option) any later version.
-//
-// This library is distributed in the hope that it will be useful,
-// but WITHOUT ANY WARRANTY; without even the implied warranty of
-// MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the GNU
-// Lesser General Public License for more details.
-//
-///////////////////////////////////////////////////////////////////////////////
-
-#ifndef LZMA_DELTA_ENCODER_H
-#define LZMA_DELTA_ENCODER_H
-
-#include "delta_common.h"
-
-extern lzma_ret lzma_delta_encoder_init(lzma_next_coder *next,
- lzma_allocator *allocator, const lzma_filter_info *filters);
-
-extern lzma_ret lzma_delta_props_encode(const void *options, uint8_t *out);
-
-#endif
diff --git a/Build/source/utils/xz-4.999.8beta/src/liblzma/lz/Makefile.am b/Build/source/utils/xz-4.999.8beta/src/liblzma/lz/Makefile.am
deleted file mode 100644
index bf41d8e6f96..00000000000
--- a/Build/source/utils/xz-4.999.8beta/src/liblzma/lz/Makefile.am
+++ /dev/null
@@ -1,36 +0,0 @@
-##
-## Copyright (C) 2007 Lasse Collin
-##
-## This library is free software; you can redistribute it and/or
-## modify it under the terms of the GNU Lesser General Public
-## License as published by the Free Software Foundation; either
-## version 2.1 of the License, or (at your option) any later version.
-##
-## This library is distributed in the hope that it will be useful,
-## but WITHOUT ANY WARRANTY; without even the implied warranty of
-## MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the GNU
-## Lesser General Public License for more details.
-##
-
-noinst_LTLIBRARIES = liblz.la
-liblz_la_CPPFLAGS = \
- -I@top_srcdir@/src/liblzma/api \
- -I@top_srcdir@/src/liblzma/common \
- -I@top_srcdir@/src/liblzma/check
-liblz_la_SOURCES =
-
-
-if COND_ENCODER_LZ
-liblz_la_SOURCES += \
- lz_encoder.c \
- lz_encoder.h \
- lz_encoder_hash.h \
- lz_encoder_mf.c
-endif
-
-
-if COND_DECODER_LZ
-liblz_la_SOURCES += \
- lz_decoder.c \
- lz_decoder.h
-endif
diff --git a/Build/source/utils/xz-4.999.8beta/src/liblzma/lz/Makefile.in b/Build/source/utils/xz-4.999.8beta/src/liblzma/lz/Makefile.in
deleted file mode 100644
index 1bbc277ee71..00000000000
--- a/Build/source/utils/xz-4.999.8beta/src/liblzma/lz/Makefile.in
+++ /dev/null
@@ -1,506 +0,0 @@
-# Makefile.in generated by automake 1.10.2 from Makefile.am.
-# @configure_input@
-
-# Copyright (C) 1994, 1995, 1996, 1997, 1998, 1999, 2000, 2001, 2002,
-# 2003, 2004, 2005, 2006, 2007, 2008 Free Software Foundation, Inc.
-# This Makefile.in is free software; the Free Software Foundation
-# gives unlimited permission to copy and/or distribute it,
-# with or without modifications, as long as this notice is preserved.
-
-# This program is distributed in the hope that it will be useful,
-# but WITHOUT ANY WARRANTY, to the extent permitted by law; without
-# even the implied warranty of MERCHANTABILITY or FITNESS FOR A
-# PARTICULAR PURPOSE.
-
-@SET_MAKE@
-
-VPATH = @srcdir@
-pkgdatadir = $(datadir)/@PACKAGE@
-pkglibdir = $(libdir)/@PACKAGE@
-pkgincludedir = $(includedir)/@PACKAGE@
-am__cd = CDPATH="$${ZSH_VERSION+.}$(PATH_SEPARATOR)" && cd
-install_sh_DATA = $(install_sh) -c -m 644
-install_sh_PROGRAM = $(install_sh) -c
-install_sh_SCRIPT = $(install_sh) -c
-INSTALL_HEADER = $(INSTALL_DATA)
-transform = $(program_transform_name)
-NORMAL_INSTALL = :
-PRE_INSTALL = :
-POST_INSTALL = :
-NORMAL_UNINSTALL = :
-PRE_UNINSTALL = :
-POST_UNINSTALL = :
-build_triplet = @build@
-host_triplet = @host@
-@COND_ENCODER_LZ_TRUE@am__append_1 = \
-@COND_ENCODER_LZ_TRUE@ lz_encoder.c \
-@COND_ENCODER_LZ_TRUE@ lz_encoder.h \
-@COND_ENCODER_LZ_TRUE@ lz_encoder_hash.h \
-@COND_ENCODER_LZ_TRUE@ lz_encoder_mf.c
-
-@COND_DECODER_LZ_TRUE@am__append_2 = \
-@COND_DECODER_LZ_TRUE@ lz_decoder.c \
-@COND_DECODER_LZ_TRUE@ lz_decoder.h
-
-subdir = src/liblzma/lz
-DIST_COMMON = $(srcdir)/Makefile.am $(srcdir)/Makefile.in
-ACLOCAL_M4 = $(top_srcdir)/aclocal.m4
-am__aclocal_m4_deps = $(top_srcdir)/m4/acx_pthread.m4 \
- $(top_srcdir)/m4/getopt.m4 $(top_srcdir)/m4/gettext.m4 \
- $(top_srcdir)/m4/iconv.m4 $(top_srcdir)/m4/lib-ld.m4 \
- $(top_srcdir)/m4/lib-link.m4 $(top_srcdir)/m4/lib-prefix.m4 \
- $(top_srcdir)/m4/nls.m4 $(top_srcdir)/m4/po.m4 \
- $(top_srcdir)/m4/progtest.m4 $(top_srcdir)/configure.ac
-am__configure_deps = $(am__aclocal_m4_deps) $(CONFIGURE_DEPENDENCIES) \
- $(ACLOCAL_M4)
-mkinstalldirs = $(install_sh) -d
-CONFIG_HEADER = $(top_builddir)/config.h
-CONFIG_CLEAN_FILES =
-LTLIBRARIES = $(noinst_LTLIBRARIES)
-liblz_la_LIBADD =
-am__liblz_la_SOURCES_DIST = lz_encoder.c lz_encoder.h \
- lz_encoder_hash.h lz_encoder_mf.c lz_decoder.c lz_decoder.h
-@COND_ENCODER_LZ_TRUE@am__objects_1 = liblz_la-lz_encoder.lo \
-@COND_ENCODER_LZ_TRUE@ liblz_la-lz_encoder_mf.lo
-@COND_DECODER_LZ_TRUE@am__objects_2 = liblz_la-lz_decoder.lo
-am_liblz_la_OBJECTS = $(am__objects_1) $(am__objects_2)
-liblz_la_OBJECTS = $(am_liblz_la_OBJECTS)
-DEFAULT_INCLUDES = -I.@am__isrc@ -I$(top_builddir)
-depcomp = $(SHELL) $(top_srcdir)/depcomp
-am__depfiles_maybe = depfiles
-COMPILE = $(CC) $(DEFS) $(DEFAULT_INCLUDES) $(INCLUDES) $(AM_CPPFLAGS) \
- $(CPPFLAGS) $(AM_CFLAGS) $(CFLAGS)
-LTCOMPILE = $(LIBTOOL) --tag=CC $(AM_LIBTOOLFLAGS) $(LIBTOOLFLAGS) \
- --mode=compile $(CC) $(DEFS) $(DEFAULT_INCLUDES) $(INCLUDES) \
- $(AM_CPPFLAGS) $(CPPFLAGS) $(AM_CFLAGS) $(CFLAGS)
-CCLD = $(CC)
-LINK = $(LIBTOOL) --tag=CC $(AM_LIBTOOLFLAGS) $(LIBTOOLFLAGS) \
- --mode=link $(CCLD) $(AM_CFLAGS) $(CFLAGS) $(AM_LDFLAGS) \
- $(LDFLAGS) -o $@
-SOURCES = $(liblz_la_SOURCES)
-DIST_SOURCES = $(am__liblz_la_SOURCES_DIST)
-ETAGS = etags
-CTAGS = ctags
-DISTFILES = $(DIST_COMMON) $(DIST_SOURCES) $(TEXINFOS) $(EXTRA_DIST)
-ACLOCAL = @ACLOCAL@
-AMTAR = @AMTAR@
-AR = @AR@
-AUTOCONF = @AUTOCONF@
-AUTOHEADER = @AUTOHEADER@
-AUTOMAKE = @AUTOMAKE@
-AWK = @AWK@
-CC = @CC@
-CCAS = @CCAS@
-CCASDEPMODE = @CCASDEPMODE@
-CCASFLAGS = @CCASFLAGS@
-CCDEPMODE = @CCDEPMODE@
-CFLAGS = @CFLAGS@
-CFLAG_VISIBILITY = @CFLAG_VISIBILITY@
-CPP = @CPP@
-CPPFLAGS = @CPPFLAGS@
-CXX = @CXX@
-CXXCPP = @CXXCPP@
-CXXDEPMODE = @CXXDEPMODE@
-CXXFLAGS = @CXXFLAGS@
-CYGPATH_W = @CYGPATH_W@
-DEFS = @DEFS@
-DEPDIR = @DEPDIR@
-DSYMUTIL = @DSYMUTIL@
-ECHO = @ECHO@
-ECHO_C = @ECHO_C@
-ECHO_N = @ECHO_N@
-ECHO_T = @ECHO_T@
-EGREP = @EGREP@
-EXEEXT = @EXEEXT@
-F77 = @F77@
-FFLAGS = @FFLAGS@
-GETOPT_H = @GETOPT_H@
-GMSGFMT = @GMSGFMT@
-GMSGFMT_015 = @GMSGFMT_015@
-GREP = @GREP@
-HAVE_VISIBILITY = @HAVE_VISIBILITY@
-INSTALL = @INSTALL@
-INSTALL_DATA = @INSTALL_DATA@
-INSTALL_PROGRAM = @INSTALL_PROGRAM@
-INSTALL_SCRIPT = @INSTALL_SCRIPT@
-INSTALL_STRIP_PROGRAM = @INSTALL_STRIP_PROGRAM@
-INTLLIBS = @INTLLIBS@
-INTL_MACOSX_LIBS = @INTL_MACOSX_LIBS@
-LDFLAGS = @LDFLAGS@
-LIBICONV = @LIBICONV@
-LIBINTL = @LIBINTL@
-LIBOBJS = @LIBOBJS@
-LIBS = @LIBS@
-LIBTOOL = @LIBTOOL@
-LN_S = @LN_S@
-LTLIBICONV = @LTLIBICONV@
-LTLIBINTL = @LTLIBINTL@
-LTLIBOBJS = @LTLIBOBJS@
-MAKEINFO = @MAKEINFO@
-MKDIR_P = @MKDIR_P@
-MSGFMT = @MSGFMT@
-MSGFMT_015 = @MSGFMT_015@
-MSGMERGE = @MSGMERGE@
-NMEDIT = @NMEDIT@
-OBJEXT = @OBJEXT@
-PACKAGE = @PACKAGE@
-PACKAGE_BUGREPORT = @PACKAGE_BUGREPORT@
-PACKAGE_NAME = @PACKAGE_NAME@
-PACKAGE_STRING = @PACKAGE_STRING@
-PACKAGE_TARNAME = @PACKAGE_TARNAME@
-PACKAGE_VERSION = @PACKAGE_VERSION@
-PATH_SEPARATOR = @PATH_SEPARATOR@
-POSUB = @POSUB@
-PTHREAD_CC = @PTHREAD_CC@
-PTHREAD_CFLAGS = @PTHREAD_CFLAGS@
-PTHREAD_LIBS = @PTHREAD_LIBS@
-RANLIB = @RANLIB@
-SED = @SED@
-SET_MAKE = @SET_MAKE@
-SHELL = @SHELL@
-STRIP = @STRIP@
-USE_NLS = @USE_NLS@
-VERSION = @VERSION@
-XGETTEXT = @XGETTEXT@
-XGETTEXT_015 = @XGETTEXT_015@
-abs_builddir = @abs_builddir@
-abs_srcdir = @abs_srcdir@
-abs_top_builddir = @abs_top_builddir@
-abs_top_srcdir = @abs_top_srcdir@
-ac_ct_CC = @ac_ct_CC@
-ac_ct_CXX = @ac_ct_CXX@
-ac_ct_F77 = @ac_ct_F77@
-acx_pthread_config = @acx_pthread_config@
-am__include = @am__include@
-am__leading_dot = @am__leading_dot@
-am__quote = @am__quote@
-am__tar = @am__tar@
-am__untar = @am__untar@
-bindir = @bindir@
-build = @build@
-build_alias = @build_alias@
-build_cpu = @build_cpu@
-build_os = @build_os@
-build_vendor = @build_vendor@
-builddir = @builddir@
-datadir = @datadir@
-datarootdir = @datarootdir@
-docdir = @docdir@
-dvidir = @dvidir@
-exec_prefix = @exec_prefix@
-host = @host@
-host_alias = @host_alias@
-host_cpu = @host_cpu@
-host_os = @host_os@
-host_vendor = @host_vendor@
-htmldir = @htmldir@
-includedir = @includedir@
-infodir = @infodir@
-install_sh = @install_sh@
-libdir = @libdir@
-libexecdir = @libexecdir@
-localedir = @localedir@
-localstatedir = @localstatedir@
-mandir = @mandir@
-mkdir_p = @mkdir_p@
-oldincludedir = @oldincludedir@
-pdfdir = @pdfdir@
-prefix = @prefix@
-program_transform_name = @program_transform_name@
-psdir = @psdir@
-sbindir = @sbindir@
-sharedstatedir = @sharedstatedir@
-srcdir = @srcdir@
-sysconfdir = @sysconfdir@
-target_alias = @target_alias@
-top_build_prefix = @top_build_prefix@
-top_builddir = @top_builddir@
-top_srcdir = @top_srcdir@
-noinst_LTLIBRARIES = liblz.la
-liblz_la_CPPFLAGS = \
- -I@top_srcdir@/src/liblzma/api \
- -I@top_srcdir@/src/liblzma/common \
- -I@top_srcdir@/src/liblzma/check
-
-liblz_la_SOURCES = $(am__append_1) $(am__append_2)
-all: all-am
-
-.SUFFIXES:
-.SUFFIXES: .c .lo .o .obj
-$(srcdir)/Makefile.in: $(srcdir)/Makefile.am $(am__configure_deps)
- @for dep in $?; do \
- case '$(am__configure_deps)' in \
- *$$dep*) \
- ( cd $(top_builddir) && $(MAKE) $(AM_MAKEFLAGS) am--refresh ) \
- && { if test -f $@; then exit 0; else break; fi; }; \
- exit 1;; \
- esac; \
- done; \
- echo ' cd $(top_srcdir) && $(AUTOMAKE) --foreign src/liblzma/lz/Makefile'; \
- cd $(top_srcdir) && \
- $(AUTOMAKE) --foreign src/liblzma/lz/Makefile
-.PRECIOUS: Makefile
-Makefile: $(srcdir)/Makefile.in $(top_builddir)/config.status
- @case '$?' in \
- *config.status*) \
- cd $(top_builddir) && $(MAKE) $(AM_MAKEFLAGS) am--refresh;; \
- *) \
- echo ' cd $(top_builddir) && $(SHELL) ./config.status $(subdir)/$@ $(am__depfiles_maybe)'; \
- cd $(top_builddir) && $(SHELL) ./config.status $(subdir)/$@ $(am__depfiles_maybe);; \
- esac;
-
-$(top_builddir)/config.status: $(top_srcdir)/configure $(CONFIG_STATUS_DEPENDENCIES)
- cd $(top_builddir) && $(MAKE) $(AM_MAKEFLAGS) am--refresh
-
-$(top_srcdir)/configure: $(am__configure_deps)
- cd $(top_builddir) && $(MAKE) $(AM_MAKEFLAGS) am--refresh
-$(ACLOCAL_M4): $(am__aclocal_m4_deps)
- cd $(top_builddir) && $(MAKE) $(AM_MAKEFLAGS) am--refresh
-
-clean-noinstLTLIBRARIES:
- -test -z "$(noinst_LTLIBRARIES)" || rm -f $(noinst_LTLIBRARIES)
- @list='$(noinst_LTLIBRARIES)'; for p in $$list; do \
- dir="`echo $$p | sed -e 's|/[^/]*$$||'`"; \
- test "$$dir" != "$$p" || dir=.; \
- echo "rm -f \"$${dir}/so_locations\""; \
- rm -f "$${dir}/so_locations"; \
- done
-liblz.la: $(liblz_la_OBJECTS) $(liblz_la_DEPENDENCIES)
- $(LINK) $(liblz_la_OBJECTS) $(liblz_la_LIBADD) $(LIBS)
-
-mostlyclean-compile:
- -rm -f *.$(OBJEXT)
-
-distclean-compile:
- -rm -f *.tab.c
-
-@AMDEP_TRUE@@am__include@ @am__quote@./$(DEPDIR)/liblz_la-lz_decoder.Plo@am__quote@
-@AMDEP_TRUE@@am__include@ @am__quote@./$(DEPDIR)/liblz_la-lz_encoder.Plo@am__quote@
-@AMDEP_TRUE@@am__include@ @am__quote@./$(DEPDIR)/liblz_la-lz_encoder_mf.Plo@am__quote@
-
-.c.o:
-@am__fastdepCC_TRUE@ $(COMPILE) -MT $@ -MD -MP -MF $(DEPDIR)/$*.Tpo -c -o $@ $<
-@am__fastdepCC_TRUE@ mv -f $(DEPDIR)/$*.Tpo $(DEPDIR)/$*.Po
-@AMDEP_TRUE@@am__fastdepCC_FALSE@ source='$<' object='$@' libtool=no @AMDEPBACKSLASH@
-@AMDEP_TRUE@@am__fastdepCC_FALSE@ DEPDIR=$(DEPDIR) $(CCDEPMODE) $(depcomp) @AMDEPBACKSLASH@
-@am__fastdepCC_FALSE@ $(COMPILE) -c $<
-
-.c.obj:
-@am__fastdepCC_TRUE@ $(COMPILE) -MT $@ -MD -MP -MF $(DEPDIR)/$*.Tpo -c -o $@ `$(CYGPATH_W) '$<'`
-@am__fastdepCC_TRUE@ mv -f $(DEPDIR)/$*.Tpo $(DEPDIR)/$*.Po
-@AMDEP_TRUE@@am__fastdepCC_FALSE@ source='$<' object='$@' libtool=no @AMDEPBACKSLASH@
-@AMDEP_TRUE@@am__fastdepCC_FALSE@ DEPDIR=$(DEPDIR) $(CCDEPMODE) $(depcomp) @AMDEPBACKSLASH@
-@am__fastdepCC_FALSE@ $(COMPILE) -c `$(CYGPATH_W) '$<'`
-
-.c.lo:
-@am__fastdepCC_TRUE@ $(LTCOMPILE) -MT $@ -MD -MP -MF $(DEPDIR)/$*.Tpo -c -o $@ $<
-@am__fastdepCC_TRUE@ mv -f $(DEPDIR)/$*.Tpo $(DEPDIR)/$*.Plo
-@AMDEP_TRUE@@am__fastdepCC_FALSE@ source='$<' object='$@' libtool=yes @AMDEPBACKSLASH@
-@AMDEP_TRUE@@am__fastdepCC_FALSE@ DEPDIR=$(DEPDIR) $(CCDEPMODE) $(depcomp) @AMDEPBACKSLASH@
-@am__fastdepCC_FALSE@ $(LTCOMPILE) -c -o $@ $<
-
-liblz_la-lz_encoder.lo: lz_encoder.c
-@am__fastdepCC_TRUE@ $(LIBTOOL) --tag=CC $(AM_LIBTOOLFLAGS) $(LIBTOOLFLAGS) --mode=compile $(CC) $(DEFS) $(DEFAULT_INCLUDES) $(INCLUDES) $(liblz_la_CPPFLAGS) $(CPPFLAGS) $(AM_CFLAGS) $(CFLAGS) -MT liblz_la-lz_encoder.lo -MD -MP -MF $(DEPDIR)/liblz_la-lz_encoder.Tpo -c -o liblz_la-lz_encoder.lo `test -f 'lz_encoder.c' || echo '$(srcdir)/'`lz_encoder.c
-@am__fastdepCC_TRUE@ mv -f $(DEPDIR)/liblz_la-lz_encoder.Tpo $(DEPDIR)/liblz_la-lz_encoder.Plo
-@AMDEP_TRUE@@am__fastdepCC_FALSE@ source='lz_encoder.c' object='liblz_la-lz_encoder.lo' libtool=yes @AMDEPBACKSLASH@
-@AMDEP_TRUE@@am__fastdepCC_FALSE@ DEPDIR=$(DEPDIR) $(CCDEPMODE) $(depcomp) @AMDEPBACKSLASH@
-@am__fastdepCC_FALSE@ $(LIBTOOL) --tag=CC $(AM_LIBTOOLFLAGS) $(LIBTOOLFLAGS) --mode=compile $(CC) $(DEFS) $(DEFAULT_INCLUDES) $(INCLUDES) $(liblz_la_CPPFLAGS) $(CPPFLAGS) $(AM_CFLAGS) $(CFLAGS) -c -o liblz_la-lz_encoder.lo `test -f 'lz_encoder.c' || echo '$(srcdir)/'`lz_encoder.c
-
-liblz_la-lz_encoder_mf.lo: lz_encoder_mf.c
-@am__fastdepCC_TRUE@ $(LIBTOOL) --tag=CC $(AM_LIBTOOLFLAGS) $(LIBTOOLFLAGS) --mode=compile $(CC) $(DEFS) $(DEFAULT_INCLUDES) $(INCLUDES) $(liblz_la_CPPFLAGS) $(CPPFLAGS) $(AM_CFLAGS) $(CFLAGS) -MT liblz_la-lz_encoder_mf.lo -MD -MP -MF $(DEPDIR)/liblz_la-lz_encoder_mf.Tpo -c -o liblz_la-lz_encoder_mf.lo `test -f 'lz_encoder_mf.c' || echo '$(srcdir)/'`lz_encoder_mf.c
-@am__fastdepCC_TRUE@ mv -f $(DEPDIR)/liblz_la-lz_encoder_mf.Tpo $(DEPDIR)/liblz_la-lz_encoder_mf.Plo
-@AMDEP_TRUE@@am__fastdepCC_FALSE@ source='lz_encoder_mf.c' object='liblz_la-lz_encoder_mf.lo' libtool=yes @AMDEPBACKSLASH@
-@AMDEP_TRUE@@am__fastdepCC_FALSE@ DEPDIR=$(DEPDIR) $(CCDEPMODE) $(depcomp) @AMDEPBACKSLASH@
-@am__fastdepCC_FALSE@ $(LIBTOOL) --tag=CC $(AM_LIBTOOLFLAGS) $(LIBTOOLFLAGS) --mode=compile $(CC) $(DEFS) $(DEFAULT_INCLUDES) $(INCLUDES) $(liblz_la_CPPFLAGS) $(CPPFLAGS) $(AM_CFLAGS) $(CFLAGS) -c -o liblz_la-lz_encoder_mf.lo `test -f 'lz_encoder_mf.c' || echo '$(srcdir)/'`lz_encoder_mf.c
-
-liblz_la-lz_decoder.lo: lz_decoder.c
-@am__fastdepCC_TRUE@ $(LIBTOOL) --tag=CC $(AM_LIBTOOLFLAGS) $(LIBTOOLFLAGS) --mode=compile $(CC) $(DEFS) $(DEFAULT_INCLUDES) $(INCLUDES) $(liblz_la_CPPFLAGS) $(CPPFLAGS) $(AM_CFLAGS) $(CFLAGS) -MT liblz_la-lz_decoder.lo -MD -MP -MF $(DEPDIR)/liblz_la-lz_decoder.Tpo -c -o liblz_la-lz_decoder.lo `test -f 'lz_decoder.c' || echo '$(srcdir)/'`lz_decoder.c
-@am__fastdepCC_TRUE@ mv -f $(DEPDIR)/liblz_la-lz_decoder.Tpo $(DEPDIR)/liblz_la-lz_decoder.Plo
-@AMDEP_TRUE@@am__fastdepCC_FALSE@ source='lz_decoder.c' object='liblz_la-lz_decoder.lo' libtool=yes @AMDEPBACKSLASH@
-@AMDEP_TRUE@@am__fastdepCC_FALSE@ DEPDIR=$(DEPDIR) $(CCDEPMODE) $(depcomp) @AMDEPBACKSLASH@
-@am__fastdepCC_FALSE@ $(LIBTOOL) --tag=CC $(AM_LIBTOOLFLAGS) $(LIBTOOLFLAGS) --mode=compile $(CC) $(DEFS) $(DEFAULT_INCLUDES) $(INCLUDES) $(liblz_la_CPPFLAGS) $(CPPFLAGS) $(AM_CFLAGS) $(CFLAGS) -c -o liblz_la-lz_decoder.lo `test -f 'lz_decoder.c' || echo '$(srcdir)/'`lz_decoder.c
-
-mostlyclean-libtool:
- -rm -f *.lo
-
-clean-libtool:
- -rm -rf .libs _libs
-
-ID: $(HEADERS) $(SOURCES) $(LISP) $(TAGS_FILES)
- list='$(SOURCES) $(HEADERS) $(LISP) $(TAGS_FILES)'; \
- unique=`for i in $$list; do \
- if test -f "$$i"; then echo $$i; else echo $(srcdir)/$$i; fi; \
- done | \
- $(AWK) '{ files[$$0] = 1; nonempty = 1; } \
- END { if (nonempty) { for (i in files) print i; }; }'`; \
- mkid -fID $$unique
-tags: TAGS
-
-TAGS: $(HEADERS) $(SOURCES) $(TAGS_DEPENDENCIES) \
- $(TAGS_FILES) $(LISP)
- tags=; \
- here=`pwd`; \
- list='$(SOURCES) $(HEADERS) $(LISP) $(TAGS_FILES)'; \
- unique=`for i in $$list; do \
- if test -f "$$i"; then echo $$i; else echo $(srcdir)/$$i; fi; \
- done | \
- $(AWK) '{ files[$$0] = 1; nonempty = 1; } \
- END { if (nonempty) { for (i in files) print i; }; }'`; \
- if test -z "$(ETAGS_ARGS)$$tags$$unique"; then :; else \
- test -n "$$unique" || unique=$$empty_fix; \
- $(ETAGS) $(ETAGSFLAGS) $(AM_ETAGSFLAGS) $(ETAGS_ARGS) \
- $$tags $$unique; \
- fi
-ctags: CTAGS
-CTAGS: $(HEADERS) $(SOURCES) $(TAGS_DEPENDENCIES) \
- $(TAGS_FILES) $(LISP)
- tags=; \
- list='$(SOURCES) $(HEADERS) $(LISP) $(TAGS_FILES)'; \
- unique=`for i in $$list; do \
- if test -f "$$i"; then echo $$i; else echo $(srcdir)/$$i; fi; \
- done | \
- $(AWK) '{ files[$$0] = 1; nonempty = 1; } \
- END { if (nonempty) { for (i in files) print i; }; }'`; \
- test -z "$(CTAGS_ARGS)$$tags$$unique" \
- || $(CTAGS) $(CTAGSFLAGS) $(AM_CTAGSFLAGS) $(CTAGS_ARGS) \
- $$tags $$unique
-
-GTAGS:
- here=`$(am__cd) $(top_builddir) && pwd` \
- && cd $(top_srcdir) \
- && gtags -i $(GTAGS_ARGS) $$here
-
-distclean-tags:
- -rm -f TAGS ID GTAGS GRTAGS GSYMS GPATH tags
-
-distdir: $(DISTFILES)
- @srcdirstrip=`echo "$(srcdir)" | sed 's/[].[^$$\\*]/\\\\&/g'`; \
- topsrcdirstrip=`echo "$(top_srcdir)" | sed 's/[].[^$$\\*]/\\\\&/g'`; \
- list='$(DISTFILES)'; \
- dist_files=`for file in $$list; do echo $$file; done | \
- sed -e "s|^$$srcdirstrip/||;t" \
- -e "s|^$$topsrcdirstrip/|$(top_builddir)/|;t"`; \
- case $$dist_files in \
- */*) $(MKDIR_P) `echo "$$dist_files" | \
- sed '/\//!d;s|^|$(distdir)/|;s,/[^/]*$$,,' | \
- sort -u` ;; \
- esac; \
- for file in $$dist_files; do \
- if test -f $$file || test -d $$file; then d=.; else d=$(srcdir); fi; \
- if test -d $$d/$$file; then \
- dir=`echo "/$$file" | sed -e 's,/[^/]*$$,,'`; \
- if test -d $(srcdir)/$$file && test $$d != $(srcdir); then \
- cp -pR $(srcdir)/$$file $(distdir)$$dir || exit 1; \
- fi; \
- cp -pR $$d/$$file $(distdir)$$dir || exit 1; \
- else \
- test -f $(distdir)/$$file \
- || cp -p $$d/$$file $(distdir)/$$file \
- || exit 1; \
- fi; \
- done
-check-am: all-am
-check: check-am
-all-am: Makefile $(LTLIBRARIES)
-installdirs:
-install: install-am
-install-exec: install-exec-am
-install-data: install-data-am
-uninstall: uninstall-am
-
-install-am: all-am
- @$(MAKE) $(AM_MAKEFLAGS) install-exec-am install-data-am
-
-installcheck: installcheck-am
-install-strip:
- $(MAKE) $(AM_MAKEFLAGS) INSTALL_PROGRAM="$(INSTALL_STRIP_PROGRAM)" \
- install_sh_PROGRAM="$(INSTALL_STRIP_PROGRAM)" INSTALL_STRIP_FLAG=-s \
- `test -z '$(STRIP)' || \
- echo "INSTALL_PROGRAM_ENV=STRIPPROG='$(STRIP)'"` install
-mostlyclean-generic:
-
-clean-generic:
-
-distclean-generic:
- -test -z "$(CONFIG_CLEAN_FILES)" || rm -f $(CONFIG_CLEAN_FILES)
-
-maintainer-clean-generic:
- @echo "This command is intended for maintainers to use"
- @echo "it deletes files that may require special tools to rebuild."
-clean: clean-am
-
-clean-am: clean-generic clean-libtool clean-noinstLTLIBRARIES \
- mostlyclean-am
-
-distclean: distclean-am
- -rm -rf ./$(DEPDIR)
- -rm -f Makefile
-distclean-am: clean-am distclean-compile distclean-generic \
- distclean-tags
-
-dvi: dvi-am
-
-dvi-am:
-
-html: html-am
-
-info: info-am
-
-info-am:
-
-install-data-am:
-
-install-dvi: install-dvi-am
-
-install-exec-am:
-
-install-html: install-html-am
-
-install-info: install-info-am
-
-install-man:
-
-install-pdf: install-pdf-am
-
-install-ps: install-ps-am
-
-installcheck-am:
-
-maintainer-clean: maintainer-clean-am
- -rm -rf ./$(DEPDIR)
- -rm -f Makefile
-maintainer-clean-am: distclean-am maintainer-clean-generic
-
-mostlyclean: mostlyclean-am
-
-mostlyclean-am: mostlyclean-compile mostlyclean-generic \
- mostlyclean-libtool
-
-pdf: pdf-am
-
-pdf-am:
-
-ps: ps-am
-
-ps-am:
-
-uninstall-am:
-
-.MAKE: install-am install-strip
-
-.PHONY: CTAGS GTAGS all all-am check check-am clean clean-generic \
- clean-libtool clean-noinstLTLIBRARIES ctags distclean \
- distclean-compile distclean-generic distclean-libtool \
- distclean-tags distdir dvi dvi-am html html-am info info-am \
- install install-am install-data install-data-am install-dvi \
- install-dvi-am install-exec install-exec-am install-html \
- install-html-am install-info install-info-am install-man \
- install-pdf install-pdf-am install-ps install-ps-am \
- install-strip installcheck installcheck-am installdirs \
- maintainer-clean maintainer-clean-generic mostlyclean \
- mostlyclean-compile mostlyclean-generic mostlyclean-libtool \
- pdf pdf-am ps ps-am tags uninstall uninstall-am
-
-# Tell versions [3.59,3.63) of GNU make to not export all variables.
-# Otherwise a system limit (for SysV at least) may be exceeded.
-.NOEXPORT:
diff --git a/Build/source/utils/xz-4.999.8beta/src/liblzma/lzma/Makefile.am b/Build/source/utils/xz-4.999.8beta/src/liblzma/lzma/Makefile.am
deleted file mode 100644
index ec6b7b27b1f..00000000000
--- a/Build/source/utils/xz-4.999.8beta/src/liblzma/lzma/Makefile.am
+++ /dev/null
@@ -1,58 +0,0 @@
-##
-## Copyright (C) 2007 Lasse Collin
-##
-## This library is free software; you can redistribute it and/or
-## modify it under the terms of the GNU Lesser General Public
-## License as published by the Free Software Foundation; either
-## version 2.1 of the License, or (at your option) any later version.
-##
-## This library is distributed in the hope that it will be useful,
-## but WITHOUT ANY WARRANTY; without even the implied warranty of
-## MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the GNU
-## Lesser General Public License for more details.
-##
-
-EXTRA_DIST = fastpos_tablegen.c
-
-## Using liblzma2 since liblzma is already used for the final library.
-noinst_LTLIBRARIES = liblzma2.la
-liblzma2_la_CPPFLAGS = \
- -I@top_srcdir@/src/liblzma/api \
- -I@top_srcdir@/src/liblzma/common \
- -I@top_srcdir@/src/liblzma/lz \
- -I@top_srcdir@/src/liblzma/rangecoder
-
-liblzma2_la_SOURCES = lzma_common.h
-
-if COND_ENCODER_LZMA1
-liblzma2_la_SOURCES += \
- fastpos.h \
- lzma_encoder.h \
- lzma_encoder.c \
- lzma_encoder_presets.c \
- lzma_encoder_private.h \
- lzma_encoder_optimum_fast.c \
- lzma_encoder_optimum_normal.c
-
-if !COND_SMALL
-liblzma2_la_SOURCES += fastpos_table.c
-endif
-endif
-
-if COND_DECODER_LZMA1
-liblzma2_la_SOURCES += \
- lzma_decoder.c \
- lzma_decoder.h
-endif
-
-if COND_ENCODER_LZMA2
-liblzma2_la_SOURCES += \
- lzma2_encoder.c \
- lzma2_encoder.h
-endif
-
-if COND_DECODER_LZMA2
-liblzma2_la_SOURCES += \
- lzma2_decoder.c \
- lzma2_decoder.h
-endif
diff --git a/Build/source/utils/xz-4.999.8beta/src/liblzma/lzma/Makefile.in b/Build/source/utils/xz-4.999.8beta/src/liblzma/lzma/Makefile.in
deleted file mode 100644
index e41085462c0..00000000000
--- a/Build/source/utils/xz-4.999.8beta/src/liblzma/lzma/Makefile.in
+++ /dev/null
@@ -1,570 +0,0 @@
-# Makefile.in generated by automake 1.10.2 from Makefile.am.
-# @configure_input@
-
-# Copyright (C) 1994, 1995, 1996, 1997, 1998, 1999, 2000, 2001, 2002,
-# 2003, 2004, 2005, 2006, 2007, 2008 Free Software Foundation, Inc.
-# This Makefile.in is free software; the Free Software Foundation
-# gives unlimited permission to copy and/or distribute it,
-# with or without modifications, as long as this notice is preserved.
-
-# This program is distributed in the hope that it will be useful,
-# but WITHOUT ANY WARRANTY, to the extent permitted by law; without
-# even the implied warranty of MERCHANTABILITY or FITNESS FOR A
-# PARTICULAR PURPOSE.
-
-@SET_MAKE@
-
-VPATH = @srcdir@
-pkgdatadir = $(datadir)/@PACKAGE@
-pkglibdir = $(libdir)/@PACKAGE@
-pkgincludedir = $(includedir)/@PACKAGE@
-am__cd = CDPATH="$${ZSH_VERSION+.}$(PATH_SEPARATOR)" && cd
-install_sh_DATA = $(install_sh) -c -m 644
-install_sh_PROGRAM = $(install_sh) -c
-install_sh_SCRIPT = $(install_sh) -c
-INSTALL_HEADER = $(INSTALL_DATA)
-transform = $(program_transform_name)
-NORMAL_INSTALL = :
-PRE_INSTALL = :
-POST_INSTALL = :
-NORMAL_UNINSTALL = :
-PRE_UNINSTALL = :
-POST_UNINSTALL = :
-build_triplet = @build@
-host_triplet = @host@
-@COND_ENCODER_LZMA1_TRUE@am__append_1 = \
-@COND_ENCODER_LZMA1_TRUE@ fastpos.h \
-@COND_ENCODER_LZMA1_TRUE@ lzma_encoder.h \
-@COND_ENCODER_LZMA1_TRUE@ lzma_encoder.c \
-@COND_ENCODER_LZMA1_TRUE@ lzma_encoder_presets.c \
-@COND_ENCODER_LZMA1_TRUE@ lzma_encoder_private.h \
-@COND_ENCODER_LZMA1_TRUE@ lzma_encoder_optimum_fast.c \
-@COND_ENCODER_LZMA1_TRUE@ lzma_encoder_optimum_normal.c
-
-@COND_ENCODER_LZMA1_TRUE@@COND_SMALL_FALSE@am__append_2 = fastpos_table.c
-@COND_DECODER_LZMA1_TRUE@am__append_3 = \
-@COND_DECODER_LZMA1_TRUE@ lzma_decoder.c \
-@COND_DECODER_LZMA1_TRUE@ lzma_decoder.h
-
-@COND_ENCODER_LZMA2_TRUE@am__append_4 = \
-@COND_ENCODER_LZMA2_TRUE@ lzma2_encoder.c \
-@COND_ENCODER_LZMA2_TRUE@ lzma2_encoder.h
-
-@COND_DECODER_LZMA2_TRUE@am__append_5 = \
-@COND_DECODER_LZMA2_TRUE@ lzma2_decoder.c \
-@COND_DECODER_LZMA2_TRUE@ lzma2_decoder.h
-
-subdir = src/liblzma/lzma
-DIST_COMMON = $(srcdir)/Makefile.am $(srcdir)/Makefile.in
-ACLOCAL_M4 = $(top_srcdir)/aclocal.m4
-am__aclocal_m4_deps = $(top_srcdir)/m4/acx_pthread.m4 \
- $(top_srcdir)/m4/getopt.m4 $(top_srcdir)/m4/gettext.m4 \
- $(top_srcdir)/m4/iconv.m4 $(top_srcdir)/m4/lib-ld.m4 \
- $(top_srcdir)/m4/lib-link.m4 $(top_srcdir)/m4/lib-prefix.m4 \
- $(top_srcdir)/m4/nls.m4 $(top_srcdir)/m4/po.m4 \
- $(top_srcdir)/m4/progtest.m4 $(top_srcdir)/configure.ac
-am__configure_deps = $(am__aclocal_m4_deps) $(CONFIGURE_DEPENDENCIES) \
- $(ACLOCAL_M4)
-mkinstalldirs = $(install_sh) -d
-CONFIG_HEADER = $(top_builddir)/config.h
-CONFIG_CLEAN_FILES =
-LTLIBRARIES = $(noinst_LTLIBRARIES)
-liblzma2_la_LIBADD =
-am__liblzma2_la_SOURCES_DIST = lzma_common.h fastpos.h lzma_encoder.h \
- lzma_encoder.c lzma_encoder_presets.c lzma_encoder_private.h \
- lzma_encoder_optimum_fast.c lzma_encoder_optimum_normal.c \
- fastpos_table.c lzma_decoder.c lzma_decoder.h lzma2_encoder.c \
- lzma2_encoder.h lzma2_decoder.c lzma2_decoder.h
-@COND_ENCODER_LZMA1_TRUE@am__objects_1 = liblzma2_la-lzma_encoder.lo \
-@COND_ENCODER_LZMA1_TRUE@ liblzma2_la-lzma_encoder_presets.lo \
-@COND_ENCODER_LZMA1_TRUE@ liblzma2_la-lzma_encoder_optimum_fast.lo \
-@COND_ENCODER_LZMA1_TRUE@ liblzma2_la-lzma_encoder_optimum_normal.lo
-@COND_ENCODER_LZMA1_TRUE@@COND_SMALL_FALSE@am__objects_2 = liblzma2_la-fastpos_table.lo
-@COND_DECODER_LZMA1_TRUE@am__objects_3 = liblzma2_la-lzma_decoder.lo
-@COND_ENCODER_LZMA2_TRUE@am__objects_4 = liblzma2_la-lzma2_encoder.lo
-@COND_DECODER_LZMA2_TRUE@am__objects_5 = liblzma2_la-lzma2_decoder.lo
-am_liblzma2_la_OBJECTS = $(am__objects_1) $(am__objects_2) \
- $(am__objects_3) $(am__objects_4) $(am__objects_5)
-liblzma2_la_OBJECTS = $(am_liblzma2_la_OBJECTS)
-DEFAULT_INCLUDES = -I.@am__isrc@ -I$(top_builddir)
-depcomp = $(SHELL) $(top_srcdir)/depcomp
-am__depfiles_maybe = depfiles
-COMPILE = $(CC) $(DEFS) $(DEFAULT_INCLUDES) $(INCLUDES) $(AM_CPPFLAGS) \
- $(CPPFLAGS) $(AM_CFLAGS) $(CFLAGS)
-LTCOMPILE = $(LIBTOOL) --tag=CC $(AM_LIBTOOLFLAGS) $(LIBTOOLFLAGS) \
- --mode=compile $(CC) $(DEFS) $(DEFAULT_INCLUDES) $(INCLUDES) \
- $(AM_CPPFLAGS) $(CPPFLAGS) $(AM_CFLAGS) $(CFLAGS)
-CCLD = $(CC)
-LINK = $(LIBTOOL) --tag=CC $(AM_LIBTOOLFLAGS) $(LIBTOOLFLAGS) \
- --mode=link $(CCLD) $(AM_CFLAGS) $(CFLAGS) $(AM_LDFLAGS) \
- $(LDFLAGS) -o $@
-SOURCES = $(liblzma2_la_SOURCES)
-DIST_SOURCES = $(am__liblzma2_la_SOURCES_DIST)
-ETAGS = etags
-CTAGS = ctags
-DISTFILES = $(DIST_COMMON) $(DIST_SOURCES) $(TEXINFOS) $(EXTRA_DIST)
-ACLOCAL = @ACLOCAL@
-AMTAR = @AMTAR@
-AR = @AR@
-AUTOCONF = @AUTOCONF@
-AUTOHEADER = @AUTOHEADER@
-AUTOMAKE = @AUTOMAKE@
-AWK = @AWK@
-CC = @CC@
-CCAS = @CCAS@
-CCASDEPMODE = @CCASDEPMODE@
-CCASFLAGS = @CCASFLAGS@
-CCDEPMODE = @CCDEPMODE@
-CFLAGS = @CFLAGS@
-CFLAG_VISIBILITY = @CFLAG_VISIBILITY@
-CPP = @CPP@
-CPPFLAGS = @CPPFLAGS@
-CXX = @CXX@
-CXXCPP = @CXXCPP@
-CXXDEPMODE = @CXXDEPMODE@
-CXXFLAGS = @CXXFLAGS@
-CYGPATH_W = @CYGPATH_W@
-DEFS = @DEFS@
-DEPDIR = @DEPDIR@
-DSYMUTIL = @DSYMUTIL@
-ECHO = @ECHO@
-ECHO_C = @ECHO_C@
-ECHO_N = @ECHO_N@
-ECHO_T = @ECHO_T@
-EGREP = @EGREP@
-EXEEXT = @EXEEXT@
-F77 = @F77@
-FFLAGS = @FFLAGS@
-GETOPT_H = @GETOPT_H@
-GMSGFMT = @GMSGFMT@
-GMSGFMT_015 = @GMSGFMT_015@
-GREP = @GREP@
-HAVE_VISIBILITY = @HAVE_VISIBILITY@
-INSTALL = @INSTALL@
-INSTALL_DATA = @INSTALL_DATA@
-INSTALL_PROGRAM = @INSTALL_PROGRAM@
-INSTALL_SCRIPT = @INSTALL_SCRIPT@
-INSTALL_STRIP_PROGRAM = @INSTALL_STRIP_PROGRAM@
-INTLLIBS = @INTLLIBS@
-INTL_MACOSX_LIBS = @INTL_MACOSX_LIBS@
-LDFLAGS = @LDFLAGS@
-LIBICONV = @LIBICONV@
-LIBINTL = @LIBINTL@
-LIBOBJS = @LIBOBJS@
-LIBS = @LIBS@
-LIBTOOL = @LIBTOOL@
-LN_S = @LN_S@
-LTLIBICONV = @LTLIBICONV@
-LTLIBINTL = @LTLIBINTL@
-LTLIBOBJS = @LTLIBOBJS@
-MAKEINFO = @MAKEINFO@
-MKDIR_P = @MKDIR_P@
-MSGFMT = @MSGFMT@
-MSGFMT_015 = @MSGFMT_015@
-MSGMERGE = @MSGMERGE@
-NMEDIT = @NMEDIT@
-OBJEXT = @OBJEXT@
-PACKAGE = @PACKAGE@
-PACKAGE_BUGREPORT = @PACKAGE_BUGREPORT@
-PACKAGE_NAME = @PACKAGE_NAME@
-PACKAGE_STRING = @PACKAGE_STRING@
-PACKAGE_TARNAME = @PACKAGE_TARNAME@
-PACKAGE_VERSION = @PACKAGE_VERSION@
-PATH_SEPARATOR = @PATH_SEPARATOR@
-POSUB = @POSUB@
-PTHREAD_CC = @PTHREAD_CC@
-PTHREAD_CFLAGS = @PTHREAD_CFLAGS@
-PTHREAD_LIBS = @PTHREAD_LIBS@
-RANLIB = @RANLIB@
-SED = @SED@
-SET_MAKE = @SET_MAKE@
-SHELL = @SHELL@
-STRIP = @STRIP@
-USE_NLS = @USE_NLS@
-VERSION = @VERSION@
-XGETTEXT = @XGETTEXT@
-XGETTEXT_015 = @XGETTEXT_015@
-abs_builddir = @abs_builddir@
-abs_srcdir = @abs_srcdir@
-abs_top_builddir = @abs_top_builddir@
-abs_top_srcdir = @abs_top_srcdir@
-ac_ct_CC = @ac_ct_CC@
-ac_ct_CXX = @ac_ct_CXX@
-ac_ct_F77 = @ac_ct_F77@
-acx_pthread_config = @acx_pthread_config@
-am__include = @am__include@
-am__leading_dot = @am__leading_dot@
-am__quote = @am__quote@
-am__tar = @am__tar@
-am__untar = @am__untar@
-bindir = @bindir@
-build = @build@
-build_alias = @build_alias@
-build_cpu = @build_cpu@
-build_os = @build_os@
-build_vendor = @build_vendor@
-builddir = @builddir@
-datadir = @datadir@
-datarootdir = @datarootdir@
-docdir = @docdir@
-dvidir = @dvidir@
-exec_prefix = @exec_prefix@
-host = @host@
-host_alias = @host_alias@
-host_cpu = @host_cpu@
-host_os = @host_os@
-host_vendor = @host_vendor@
-htmldir = @htmldir@
-includedir = @includedir@
-infodir = @infodir@
-install_sh = @install_sh@
-libdir = @libdir@
-libexecdir = @libexecdir@
-localedir = @localedir@
-localstatedir = @localstatedir@
-mandir = @mandir@
-mkdir_p = @mkdir_p@
-oldincludedir = @oldincludedir@
-pdfdir = @pdfdir@
-prefix = @prefix@
-program_transform_name = @program_transform_name@
-psdir = @psdir@
-sbindir = @sbindir@
-sharedstatedir = @sharedstatedir@
-srcdir = @srcdir@
-sysconfdir = @sysconfdir@
-target_alias = @target_alias@
-top_build_prefix = @top_build_prefix@
-top_builddir = @top_builddir@
-top_srcdir = @top_srcdir@
-EXTRA_DIST = fastpos_tablegen.c
-noinst_LTLIBRARIES = liblzma2.la
-liblzma2_la_CPPFLAGS = \
- -I@top_srcdir@/src/liblzma/api \
- -I@top_srcdir@/src/liblzma/common \
- -I@top_srcdir@/src/liblzma/lz \
- -I@top_srcdir@/src/liblzma/rangecoder
-
-liblzma2_la_SOURCES = lzma_common.h $(am__append_1) $(am__append_2) \
- $(am__append_3) $(am__append_4) $(am__append_5)
-all: all-am
-
-.SUFFIXES:
-.SUFFIXES: .c .lo .o .obj
-$(srcdir)/Makefile.in: $(srcdir)/Makefile.am $(am__configure_deps)
- @for dep in $?; do \
- case '$(am__configure_deps)' in \
- *$$dep*) \
- ( cd $(top_builddir) && $(MAKE) $(AM_MAKEFLAGS) am--refresh ) \
- && { if test -f $@; then exit 0; else break; fi; }; \
- exit 1;; \
- esac; \
- done; \
- echo ' cd $(top_srcdir) && $(AUTOMAKE) --foreign src/liblzma/lzma/Makefile'; \
- cd $(top_srcdir) && \
- $(AUTOMAKE) --foreign src/liblzma/lzma/Makefile
-.PRECIOUS: Makefile
-Makefile: $(srcdir)/Makefile.in $(top_builddir)/config.status
- @case '$?' in \
- *config.status*) \
- cd $(top_builddir) && $(MAKE) $(AM_MAKEFLAGS) am--refresh;; \
- *) \
- echo ' cd $(top_builddir) && $(SHELL) ./config.status $(subdir)/$@ $(am__depfiles_maybe)'; \
- cd $(top_builddir) && $(SHELL) ./config.status $(subdir)/$@ $(am__depfiles_maybe);; \
- esac;
-
-$(top_builddir)/config.status: $(top_srcdir)/configure $(CONFIG_STATUS_DEPENDENCIES)
- cd $(top_builddir) && $(MAKE) $(AM_MAKEFLAGS) am--refresh
-
-$(top_srcdir)/configure: $(am__configure_deps)
- cd $(top_builddir) && $(MAKE) $(AM_MAKEFLAGS) am--refresh
-$(ACLOCAL_M4): $(am__aclocal_m4_deps)
- cd $(top_builddir) && $(MAKE) $(AM_MAKEFLAGS) am--refresh
-
-clean-noinstLTLIBRARIES:
- -test -z "$(noinst_LTLIBRARIES)" || rm -f $(noinst_LTLIBRARIES)
- @list='$(noinst_LTLIBRARIES)'; for p in $$list; do \
- dir="`echo $$p | sed -e 's|/[^/]*$$||'`"; \
- test "$$dir" != "$$p" || dir=.; \
- echo "rm -f \"$${dir}/so_locations\""; \
- rm -f "$${dir}/so_locations"; \
- done
-liblzma2.la: $(liblzma2_la_OBJECTS) $(liblzma2_la_DEPENDENCIES)
- $(LINK) $(liblzma2_la_OBJECTS) $(liblzma2_la_LIBADD) $(LIBS)
-
-mostlyclean-compile:
- -rm -f *.$(OBJEXT)
-
-distclean-compile:
- -rm -f *.tab.c
-
-@AMDEP_TRUE@@am__include@ @am__quote@./$(DEPDIR)/liblzma2_la-fastpos_table.Plo@am__quote@
-@AMDEP_TRUE@@am__include@ @am__quote@./$(DEPDIR)/liblzma2_la-lzma2_decoder.Plo@am__quote@
-@AMDEP_TRUE@@am__include@ @am__quote@./$(DEPDIR)/liblzma2_la-lzma2_encoder.Plo@am__quote@
-@AMDEP_TRUE@@am__include@ @am__quote@./$(DEPDIR)/liblzma2_la-lzma_decoder.Plo@am__quote@
-@AMDEP_TRUE@@am__include@ @am__quote@./$(DEPDIR)/liblzma2_la-lzma_encoder.Plo@am__quote@
-@AMDEP_TRUE@@am__include@ @am__quote@./$(DEPDIR)/liblzma2_la-lzma_encoder_optimum_fast.Plo@am__quote@
-@AMDEP_TRUE@@am__include@ @am__quote@./$(DEPDIR)/liblzma2_la-lzma_encoder_optimum_normal.Plo@am__quote@
-@AMDEP_TRUE@@am__include@ @am__quote@./$(DEPDIR)/liblzma2_la-lzma_encoder_presets.Plo@am__quote@
-
-.c.o:
-@am__fastdepCC_TRUE@ $(COMPILE) -MT $@ -MD -MP -MF $(DEPDIR)/$*.Tpo -c -o $@ $<
-@am__fastdepCC_TRUE@ mv -f $(DEPDIR)/$*.Tpo $(DEPDIR)/$*.Po
-@AMDEP_TRUE@@am__fastdepCC_FALSE@ source='$<' object='$@' libtool=no @AMDEPBACKSLASH@
-@AMDEP_TRUE@@am__fastdepCC_FALSE@ DEPDIR=$(DEPDIR) $(CCDEPMODE) $(depcomp) @AMDEPBACKSLASH@
-@am__fastdepCC_FALSE@ $(COMPILE) -c $<
-
-.c.obj:
-@am__fastdepCC_TRUE@ $(COMPILE) -MT $@ -MD -MP -MF $(DEPDIR)/$*.Tpo -c -o $@ `$(CYGPATH_W) '$<'`
-@am__fastdepCC_TRUE@ mv -f $(DEPDIR)/$*.Tpo $(DEPDIR)/$*.Po
-@AMDEP_TRUE@@am__fastdepCC_FALSE@ source='$<' object='$@' libtool=no @AMDEPBACKSLASH@
-@AMDEP_TRUE@@am__fastdepCC_FALSE@ DEPDIR=$(DEPDIR) $(CCDEPMODE) $(depcomp) @AMDEPBACKSLASH@
-@am__fastdepCC_FALSE@ $(COMPILE) -c `$(CYGPATH_W) '$<'`
-
-.c.lo:
-@am__fastdepCC_TRUE@ $(LTCOMPILE) -MT $@ -MD -MP -MF $(DEPDIR)/$*.Tpo -c -o $@ $<
-@am__fastdepCC_TRUE@ mv -f $(DEPDIR)/$*.Tpo $(DEPDIR)/$*.Plo
-@AMDEP_TRUE@@am__fastdepCC_FALSE@ source='$<' object='$@' libtool=yes @AMDEPBACKSLASH@
-@AMDEP_TRUE@@am__fastdepCC_FALSE@ DEPDIR=$(DEPDIR) $(CCDEPMODE) $(depcomp) @AMDEPBACKSLASH@
-@am__fastdepCC_FALSE@ $(LTCOMPILE) -c -o $@ $<
-
-liblzma2_la-lzma_encoder.lo: lzma_encoder.c
-@am__fastdepCC_TRUE@ $(LIBTOOL) --tag=CC $(AM_LIBTOOLFLAGS) $(LIBTOOLFLAGS) --mode=compile $(CC) $(DEFS) $(DEFAULT_INCLUDES) $(INCLUDES) $(liblzma2_la_CPPFLAGS) $(CPPFLAGS) $(AM_CFLAGS) $(CFLAGS) -MT liblzma2_la-lzma_encoder.lo -MD -MP -MF $(DEPDIR)/liblzma2_la-lzma_encoder.Tpo -c -o liblzma2_la-lzma_encoder.lo `test -f 'lzma_encoder.c' || echo '$(srcdir)/'`lzma_encoder.c
-@am__fastdepCC_TRUE@ mv -f $(DEPDIR)/liblzma2_la-lzma_encoder.Tpo $(DEPDIR)/liblzma2_la-lzma_encoder.Plo
-@AMDEP_TRUE@@am__fastdepCC_FALSE@ source='lzma_encoder.c' object='liblzma2_la-lzma_encoder.lo' libtool=yes @AMDEPBACKSLASH@
-@AMDEP_TRUE@@am__fastdepCC_FALSE@ DEPDIR=$(DEPDIR) $(CCDEPMODE) $(depcomp) @AMDEPBACKSLASH@
-@am__fastdepCC_FALSE@ $(LIBTOOL) --tag=CC $(AM_LIBTOOLFLAGS) $(LIBTOOLFLAGS) --mode=compile $(CC) $(DEFS) $(DEFAULT_INCLUDES) $(INCLUDES) $(liblzma2_la_CPPFLAGS) $(CPPFLAGS) $(AM_CFLAGS) $(CFLAGS) -c -o liblzma2_la-lzma_encoder.lo `test -f 'lzma_encoder.c' || echo '$(srcdir)/'`lzma_encoder.c
-
-liblzma2_la-lzma_encoder_presets.lo: lzma_encoder_presets.c
-@am__fastdepCC_TRUE@ $(LIBTOOL) --tag=CC $(AM_LIBTOOLFLAGS) $(LIBTOOLFLAGS) --mode=compile $(CC) $(DEFS) $(DEFAULT_INCLUDES) $(INCLUDES) $(liblzma2_la_CPPFLAGS) $(CPPFLAGS) $(AM_CFLAGS) $(CFLAGS) -MT liblzma2_la-lzma_encoder_presets.lo -MD -MP -MF $(DEPDIR)/liblzma2_la-lzma_encoder_presets.Tpo -c -o liblzma2_la-lzma_encoder_presets.lo `test -f 'lzma_encoder_presets.c' || echo '$(srcdir)/'`lzma_encoder_presets.c
-@am__fastdepCC_TRUE@ mv -f $(DEPDIR)/liblzma2_la-lzma_encoder_presets.Tpo $(DEPDIR)/liblzma2_la-lzma_encoder_presets.Plo
-@AMDEP_TRUE@@am__fastdepCC_FALSE@ source='lzma_encoder_presets.c' object='liblzma2_la-lzma_encoder_presets.lo' libtool=yes @AMDEPBACKSLASH@
-@AMDEP_TRUE@@am__fastdepCC_FALSE@ DEPDIR=$(DEPDIR) $(CCDEPMODE) $(depcomp) @AMDEPBACKSLASH@
-@am__fastdepCC_FALSE@ $(LIBTOOL) --tag=CC $(AM_LIBTOOLFLAGS) $(LIBTOOLFLAGS) --mode=compile $(CC) $(DEFS) $(DEFAULT_INCLUDES) $(INCLUDES) $(liblzma2_la_CPPFLAGS) $(CPPFLAGS) $(AM_CFLAGS) $(CFLAGS) -c -o liblzma2_la-lzma_encoder_presets.lo `test -f 'lzma_encoder_presets.c' || echo '$(srcdir)/'`lzma_encoder_presets.c
-
-liblzma2_la-lzma_encoder_optimum_fast.lo: lzma_encoder_optimum_fast.c
-@am__fastdepCC_TRUE@ $(LIBTOOL) --tag=CC $(AM_LIBTOOLFLAGS) $(LIBTOOLFLAGS) --mode=compile $(CC) $(DEFS) $(DEFAULT_INCLUDES) $(INCLUDES) $(liblzma2_la_CPPFLAGS) $(CPPFLAGS) $(AM_CFLAGS) $(CFLAGS) -MT liblzma2_la-lzma_encoder_optimum_fast.lo -MD -MP -MF $(DEPDIR)/liblzma2_la-lzma_encoder_optimum_fast.Tpo -c -o liblzma2_la-lzma_encoder_optimum_fast.lo `test -f 'lzma_encoder_optimum_fast.c' || echo '$(srcdir)/'`lzma_encoder_optimum_fast.c
-@am__fastdepCC_TRUE@ mv -f $(DEPDIR)/liblzma2_la-lzma_encoder_optimum_fast.Tpo $(DEPDIR)/liblzma2_la-lzma_encoder_optimum_fast.Plo
-@AMDEP_TRUE@@am__fastdepCC_FALSE@ source='lzma_encoder_optimum_fast.c' object='liblzma2_la-lzma_encoder_optimum_fast.lo' libtool=yes @AMDEPBACKSLASH@
-@AMDEP_TRUE@@am__fastdepCC_FALSE@ DEPDIR=$(DEPDIR) $(CCDEPMODE) $(depcomp) @AMDEPBACKSLASH@
-@am__fastdepCC_FALSE@ $(LIBTOOL) --tag=CC $(AM_LIBTOOLFLAGS) $(LIBTOOLFLAGS) --mode=compile $(CC) $(DEFS) $(DEFAULT_INCLUDES) $(INCLUDES) $(liblzma2_la_CPPFLAGS) $(CPPFLAGS) $(AM_CFLAGS) $(CFLAGS) -c -o liblzma2_la-lzma_encoder_optimum_fast.lo `test -f 'lzma_encoder_optimum_fast.c' || echo '$(srcdir)/'`lzma_encoder_optimum_fast.c
-
-liblzma2_la-lzma_encoder_optimum_normal.lo: lzma_encoder_optimum_normal.c
-@am__fastdepCC_TRUE@ $(LIBTOOL) --tag=CC $(AM_LIBTOOLFLAGS) $(LIBTOOLFLAGS) --mode=compile $(CC) $(DEFS) $(DEFAULT_INCLUDES) $(INCLUDES) $(liblzma2_la_CPPFLAGS) $(CPPFLAGS) $(AM_CFLAGS) $(CFLAGS) -MT liblzma2_la-lzma_encoder_optimum_normal.lo -MD -MP -MF $(DEPDIR)/liblzma2_la-lzma_encoder_optimum_normal.Tpo -c -o liblzma2_la-lzma_encoder_optimum_normal.lo `test -f 'lzma_encoder_optimum_normal.c' || echo '$(srcdir)/'`lzma_encoder_optimum_normal.c
-@am__fastdepCC_TRUE@ mv -f $(DEPDIR)/liblzma2_la-lzma_encoder_optimum_normal.Tpo $(DEPDIR)/liblzma2_la-lzma_encoder_optimum_normal.Plo
-@AMDEP_TRUE@@am__fastdepCC_FALSE@ source='lzma_encoder_optimum_normal.c' object='liblzma2_la-lzma_encoder_optimum_normal.lo' libtool=yes @AMDEPBACKSLASH@
-@AMDEP_TRUE@@am__fastdepCC_FALSE@ DEPDIR=$(DEPDIR) $(CCDEPMODE) $(depcomp) @AMDEPBACKSLASH@
-@am__fastdepCC_FALSE@ $(LIBTOOL) --tag=CC $(AM_LIBTOOLFLAGS) $(LIBTOOLFLAGS) --mode=compile $(CC) $(DEFS) $(DEFAULT_INCLUDES) $(INCLUDES) $(liblzma2_la_CPPFLAGS) $(CPPFLAGS) $(AM_CFLAGS) $(CFLAGS) -c -o liblzma2_la-lzma_encoder_optimum_normal.lo `test -f 'lzma_encoder_optimum_normal.c' || echo '$(srcdir)/'`lzma_encoder_optimum_normal.c
-
-liblzma2_la-fastpos_table.lo: fastpos_table.c
-@am__fastdepCC_TRUE@ $(LIBTOOL) --tag=CC $(AM_LIBTOOLFLAGS) $(LIBTOOLFLAGS) --mode=compile $(CC) $(DEFS) $(DEFAULT_INCLUDES) $(INCLUDES) $(liblzma2_la_CPPFLAGS) $(CPPFLAGS) $(AM_CFLAGS) $(CFLAGS) -MT liblzma2_la-fastpos_table.lo -MD -MP -MF $(DEPDIR)/liblzma2_la-fastpos_table.Tpo -c -o liblzma2_la-fastpos_table.lo `test -f 'fastpos_table.c' || echo '$(srcdir)/'`fastpos_table.c
-@am__fastdepCC_TRUE@ mv -f $(DEPDIR)/liblzma2_la-fastpos_table.Tpo $(DEPDIR)/liblzma2_la-fastpos_table.Plo
-@AMDEP_TRUE@@am__fastdepCC_FALSE@ source='fastpos_table.c' object='liblzma2_la-fastpos_table.lo' libtool=yes @AMDEPBACKSLASH@
-@AMDEP_TRUE@@am__fastdepCC_FALSE@ DEPDIR=$(DEPDIR) $(CCDEPMODE) $(depcomp) @AMDEPBACKSLASH@
-@am__fastdepCC_FALSE@ $(LIBTOOL) --tag=CC $(AM_LIBTOOLFLAGS) $(LIBTOOLFLAGS) --mode=compile $(CC) $(DEFS) $(DEFAULT_INCLUDES) $(INCLUDES) $(liblzma2_la_CPPFLAGS) $(CPPFLAGS) $(AM_CFLAGS) $(CFLAGS) -c -o liblzma2_la-fastpos_table.lo `test -f 'fastpos_table.c' || echo '$(srcdir)/'`fastpos_table.c
-
-liblzma2_la-lzma_decoder.lo: lzma_decoder.c
-@am__fastdepCC_TRUE@ $(LIBTOOL) --tag=CC $(AM_LIBTOOLFLAGS) $(LIBTOOLFLAGS) --mode=compile $(CC) $(DEFS) $(DEFAULT_INCLUDES) $(INCLUDES) $(liblzma2_la_CPPFLAGS) $(CPPFLAGS) $(AM_CFLAGS) $(CFLAGS) -MT liblzma2_la-lzma_decoder.lo -MD -MP -MF $(DEPDIR)/liblzma2_la-lzma_decoder.Tpo -c -o liblzma2_la-lzma_decoder.lo `test -f 'lzma_decoder.c' || echo '$(srcdir)/'`lzma_decoder.c
-@am__fastdepCC_TRUE@ mv -f $(DEPDIR)/liblzma2_la-lzma_decoder.Tpo $(DEPDIR)/liblzma2_la-lzma_decoder.Plo
-@AMDEP_TRUE@@am__fastdepCC_FALSE@ source='lzma_decoder.c' object='liblzma2_la-lzma_decoder.lo' libtool=yes @AMDEPBACKSLASH@
-@AMDEP_TRUE@@am__fastdepCC_FALSE@ DEPDIR=$(DEPDIR) $(CCDEPMODE) $(depcomp) @AMDEPBACKSLASH@
-@am__fastdepCC_FALSE@ $(LIBTOOL) --tag=CC $(AM_LIBTOOLFLAGS) $(LIBTOOLFLAGS) --mode=compile $(CC) $(DEFS) $(DEFAULT_INCLUDES) $(INCLUDES) $(liblzma2_la_CPPFLAGS) $(CPPFLAGS) $(AM_CFLAGS) $(CFLAGS) -c -o liblzma2_la-lzma_decoder.lo `test -f 'lzma_decoder.c' || echo '$(srcdir)/'`lzma_decoder.c
-
-liblzma2_la-lzma2_encoder.lo: lzma2_encoder.c
-@am__fastdepCC_TRUE@ $(LIBTOOL) --tag=CC $(AM_LIBTOOLFLAGS) $(LIBTOOLFLAGS) --mode=compile $(CC) $(DEFS) $(DEFAULT_INCLUDES) $(INCLUDES) $(liblzma2_la_CPPFLAGS) $(CPPFLAGS) $(AM_CFLAGS) $(CFLAGS) -MT liblzma2_la-lzma2_encoder.lo -MD -MP -MF $(DEPDIR)/liblzma2_la-lzma2_encoder.Tpo -c -o liblzma2_la-lzma2_encoder.lo `test -f 'lzma2_encoder.c' || echo '$(srcdir)/'`lzma2_encoder.c
-@am__fastdepCC_TRUE@ mv -f $(DEPDIR)/liblzma2_la-lzma2_encoder.Tpo $(DEPDIR)/liblzma2_la-lzma2_encoder.Plo
-@AMDEP_TRUE@@am__fastdepCC_FALSE@ source='lzma2_encoder.c' object='liblzma2_la-lzma2_encoder.lo' libtool=yes @AMDEPBACKSLASH@
-@AMDEP_TRUE@@am__fastdepCC_FALSE@ DEPDIR=$(DEPDIR) $(CCDEPMODE) $(depcomp) @AMDEPBACKSLASH@
-@am__fastdepCC_FALSE@ $(LIBTOOL) --tag=CC $(AM_LIBTOOLFLAGS) $(LIBTOOLFLAGS) --mode=compile $(CC) $(DEFS) $(DEFAULT_INCLUDES) $(INCLUDES) $(liblzma2_la_CPPFLAGS) $(CPPFLAGS) $(AM_CFLAGS) $(CFLAGS) -c -o liblzma2_la-lzma2_encoder.lo `test -f 'lzma2_encoder.c' || echo '$(srcdir)/'`lzma2_encoder.c
-
-liblzma2_la-lzma2_decoder.lo: lzma2_decoder.c
-@am__fastdepCC_TRUE@ $(LIBTOOL) --tag=CC $(AM_LIBTOOLFLAGS) $(LIBTOOLFLAGS) --mode=compile $(CC) $(DEFS) $(DEFAULT_INCLUDES) $(INCLUDES) $(liblzma2_la_CPPFLAGS) $(CPPFLAGS) $(AM_CFLAGS) $(CFLAGS) -MT liblzma2_la-lzma2_decoder.lo -MD -MP -MF $(DEPDIR)/liblzma2_la-lzma2_decoder.Tpo -c -o liblzma2_la-lzma2_decoder.lo `test -f 'lzma2_decoder.c' || echo '$(srcdir)/'`lzma2_decoder.c
-@am__fastdepCC_TRUE@ mv -f $(DEPDIR)/liblzma2_la-lzma2_decoder.Tpo $(DEPDIR)/liblzma2_la-lzma2_decoder.Plo
-@AMDEP_TRUE@@am__fastdepCC_FALSE@ source='lzma2_decoder.c' object='liblzma2_la-lzma2_decoder.lo' libtool=yes @AMDEPBACKSLASH@
-@AMDEP_TRUE@@am__fastdepCC_FALSE@ DEPDIR=$(DEPDIR) $(CCDEPMODE) $(depcomp) @AMDEPBACKSLASH@
-@am__fastdepCC_FALSE@ $(LIBTOOL) --tag=CC $(AM_LIBTOOLFLAGS) $(LIBTOOLFLAGS) --mode=compile $(CC) $(DEFS) $(DEFAULT_INCLUDES) $(INCLUDES) $(liblzma2_la_CPPFLAGS) $(CPPFLAGS) $(AM_CFLAGS) $(CFLAGS) -c -o liblzma2_la-lzma2_decoder.lo `test -f 'lzma2_decoder.c' || echo '$(srcdir)/'`lzma2_decoder.c
-
-mostlyclean-libtool:
- -rm -f *.lo
-
-clean-libtool:
- -rm -rf .libs _libs
-
-ID: $(HEADERS) $(SOURCES) $(LISP) $(TAGS_FILES)
- list='$(SOURCES) $(HEADERS) $(LISP) $(TAGS_FILES)'; \
- unique=`for i in $$list; do \
- if test -f "$$i"; then echo $$i; else echo $(srcdir)/$$i; fi; \
- done | \
- $(AWK) '{ files[$$0] = 1; nonempty = 1; } \
- END { if (nonempty) { for (i in files) print i; }; }'`; \
- mkid -fID $$unique
-tags: TAGS
-
-TAGS: $(HEADERS) $(SOURCES) $(TAGS_DEPENDENCIES) \
- $(TAGS_FILES) $(LISP)
- tags=; \
- here=`pwd`; \
- list='$(SOURCES) $(HEADERS) $(LISP) $(TAGS_FILES)'; \
- unique=`for i in $$list; do \
- if test -f "$$i"; then echo $$i; else echo $(srcdir)/$$i; fi; \
- done | \
- $(AWK) '{ files[$$0] = 1; nonempty = 1; } \
- END { if (nonempty) { for (i in files) print i; }; }'`; \
- if test -z "$(ETAGS_ARGS)$$tags$$unique"; then :; else \
- test -n "$$unique" || unique=$$empty_fix; \
- $(ETAGS) $(ETAGSFLAGS) $(AM_ETAGSFLAGS) $(ETAGS_ARGS) \
- $$tags $$unique; \
- fi
-ctags: CTAGS
-CTAGS: $(HEADERS) $(SOURCES) $(TAGS_DEPENDENCIES) \
- $(TAGS_FILES) $(LISP)
- tags=; \
- list='$(SOURCES) $(HEADERS) $(LISP) $(TAGS_FILES)'; \
- unique=`for i in $$list; do \
- if test -f "$$i"; then echo $$i; else echo $(srcdir)/$$i; fi; \
- done | \
- $(AWK) '{ files[$$0] = 1; nonempty = 1; } \
- END { if (nonempty) { for (i in files) print i; }; }'`; \
- test -z "$(CTAGS_ARGS)$$tags$$unique" \
- || $(CTAGS) $(CTAGSFLAGS) $(AM_CTAGSFLAGS) $(CTAGS_ARGS) \
- $$tags $$unique
-
-GTAGS:
- here=`$(am__cd) $(top_builddir) && pwd` \
- && cd $(top_srcdir) \
- && gtags -i $(GTAGS_ARGS) $$here
-
-distclean-tags:
- -rm -f TAGS ID GTAGS GRTAGS GSYMS GPATH tags
-
-distdir: $(DISTFILES)
- @srcdirstrip=`echo "$(srcdir)" | sed 's/[].[^$$\\*]/\\\\&/g'`; \
- topsrcdirstrip=`echo "$(top_srcdir)" | sed 's/[].[^$$\\*]/\\\\&/g'`; \
- list='$(DISTFILES)'; \
- dist_files=`for file in $$list; do echo $$file; done | \
- sed -e "s|^$$srcdirstrip/||;t" \
- -e "s|^$$topsrcdirstrip/|$(top_builddir)/|;t"`; \
- case $$dist_files in \
- */*) $(MKDIR_P) `echo "$$dist_files" | \
- sed '/\//!d;s|^|$(distdir)/|;s,/[^/]*$$,,' | \
- sort -u` ;; \
- esac; \
- for file in $$dist_files; do \
- if test -f $$file || test -d $$file; then d=.; else d=$(srcdir); fi; \
- if test -d $$d/$$file; then \
- dir=`echo "/$$file" | sed -e 's,/[^/]*$$,,'`; \
- if test -d $(srcdir)/$$file && test $$d != $(srcdir); then \
- cp -pR $(srcdir)/$$file $(distdir)$$dir || exit 1; \
- fi; \
- cp -pR $$d/$$file $(distdir)$$dir || exit 1; \
- else \
- test -f $(distdir)/$$file \
- || cp -p $$d/$$file $(distdir)/$$file \
- || exit 1; \
- fi; \
- done
-check-am: all-am
-check: check-am
-all-am: Makefile $(LTLIBRARIES)
-installdirs:
-install: install-am
-install-exec: install-exec-am
-install-data: install-data-am
-uninstall: uninstall-am
-
-install-am: all-am
- @$(MAKE) $(AM_MAKEFLAGS) install-exec-am install-data-am
-
-installcheck: installcheck-am
-install-strip:
- $(MAKE) $(AM_MAKEFLAGS) INSTALL_PROGRAM="$(INSTALL_STRIP_PROGRAM)" \
- install_sh_PROGRAM="$(INSTALL_STRIP_PROGRAM)" INSTALL_STRIP_FLAG=-s \
- `test -z '$(STRIP)' || \
- echo "INSTALL_PROGRAM_ENV=STRIPPROG='$(STRIP)'"` install
-mostlyclean-generic:
-
-clean-generic:
-
-distclean-generic:
- -test -z "$(CONFIG_CLEAN_FILES)" || rm -f $(CONFIG_CLEAN_FILES)
-
-maintainer-clean-generic:
- @echo "This command is intended for maintainers to use"
- @echo "it deletes files that may require special tools to rebuild."
-clean: clean-am
-
-clean-am: clean-generic clean-libtool clean-noinstLTLIBRARIES \
- mostlyclean-am
-
-distclean: distclean-am
- -rm -rf ./$(DEPDIR)
- -rm -f Makefile
-distclean-am: clean-am distclean-compile distclean-generic \
- distclean-tags
-
-dvi: dvi-am
-
-dvi-am:
-
-html: html-am
-
-info: info-am
-
-info-am:
-
-install-data-am:
-
-install-dvi: install-dvi-am
-
-install-exec-am:
-
-install-html: install-html-am
-
-install-info: install-info-am
-
-install-man:
-
-install-pdf: install-pdf-am
-
-install-ps: install-ps-am
-
-installcheck-am:
-
-maintainer-clean: maintainer-clean-am
- -rm -rf ./$(DEPDIR)
- -rm -f Makefile
-maintainer-clean-am: distclean-am maintainer-clean-generic
-
-mostlyclean: mostlyclean-am
-
-mostlyclean-am: mostlyclean-compile mostlyclean-generic \
- mostlyclean-libtool
-
-pdf: pdf-am
-
-pdf-am:
-
-ps: ps-am
-
-ps-am:
-
-uninstall-am:
-
-.MAKE: install-am install-strip
-
-.PHONY: CTAGS GTAGS all all-am check check-am clean clean-generic \
- clean-libtool clean-noinstLTLIBRARIES ctags distclean \
- distclean-compile distclean-generic distclean-libtool \
- distclean-tags distdir dvi dvi-am html html-am info info-am \
- install install-am install-data install-data-am install-dvi \
- install-dvi-am install-exec install-exec-am install-html \
- install-html-am install-info install-info-am install-man \
- install-pdf install-pdf-am install-ps install-ps-am \
- install-strip installcheck installcheck-am installdirs \
- maintainer-clean maintainer-clean-generic mostlyclean \
- mostlyclean-compile mostlyclean-generic mostlyclean-libtool \
- pdf pdf-am ps ps-am tags uninstall uninstall-am
-
-# Tell versions [3.59,3.63) of GNU make to not export all variables.
-# Otherwise a system limit (for SysV at least) may be exceeded.
-.NOEXPORT:
diff --git a/Build/source/utils/xz-4.999.8beta/src/liblzma/rangecoder/Makefile.am b/Build/source/utils/xz-4.999.8beta/src/liblzma/rangecoder/Makefile.am
deleted file mode 100644
index a202e34e155..00000000000
--- a/Build/source/utils/xz-4.999.8beta/src/liblzma/rangecoder/Makefile.am
+++ /dev/null
@@ -1,33 +0,0 @@
-##
-## Copyright (C) 2006 Lasse Collin
-##
-## This library is free software; you can redistribute it and/or
-## modify it under the terms of the GNU Lesser General Public
-## License as published by the Free Software Foundation; either
-## version 2.1 of the License, or (at your option) any later version.
-##
-## This library is distributed in the hope that it will be useful,
-## but WITHOUT ANY WARRANTY; without even the implied warranty of
-## MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the GNU
-## Lesser General Public License for more details.
-##
-
-EXTRA_DIST = price_tablegen.c
-
-noinst_LTLIBRARIES = librangecoder.la
-
-librangecoder_la_SOURCES = range_common.h
-librangecoder_la_CPPFLAGS = \
- -I@top_srcdir@/src/liblzma/api \
- -I@top_srcdir@/src/liblzma/common
-
-if COND_ENCODER_LZMA1
-librangecoder_la_SOURCES += \
- range_encoder.h \
- price.h \
- price_table.c
-endif
-
-if COND_DECODER_LZMA1
-librangecoder_la_SOURCES += range_decoder.h
-endif
diff --git a/Build/source/utils/xz-4.999.8beta/src/liblzma/rangecoder/Makefile.in b/Build/source/utils/xz-4.999.8beta/src/liblzma/rangecoder/Makefile.in
deleted file mode 100644
index 6b9b377bfb4..00000000000
--- a/Build/source/utils/xz-4.999.8beta/src/liblzma/rangecoder/Makefile.in
+++ /dev/null
@@ -1,487 +0,0 @@
-# Makefile.in generated by automake 1.10.2 from Makefile.am.
-# @configure_input@
-
-# Copyright (C) 1994, 1995, 1996, 1997, 1998, 1999, 2000, 2001, 2002,
-# 2003, 2004, 2005, 2006, 2007, 2008 Free Software Foundation, Inc.
-# This Makefile.in is free software; the Free Software Foundation
-# gives unlimited permission to copy and/or distribute it,
-# with or without modifications, as long as this notice is preserved.
-
-# This program is distributed in the hope that it will be useful,
-# but WITHOUT ANY WARRANTY, to the extent permitted by law; without
-# even the implied warranty of MERCHANTABILITY or FITNESS FOR A
-# PARTICULAR PURPOSE.
-
-@SET_MAKE@
-
-VPATH = @srcdir@
-pkgdatadir = $(datadir)/@PACKAGE@
-pkglibdir = $(libdir)/@PACKAGE@
-pkgincludedir = $(includedir)/@PACKAGE@
-am__cd = CDPATH="$${ZSH_VERSION+.}$(PATH_SEPARATOR)" && cd
-install_sh_DATA = $(install_sh) -c -m 644
-install_sh_PROGRAM = $(install_sh) -c
-install_sh_SCRIPT = $(install_sh) -c
-INSTALL_HEADER = $(INSTALL_DATA)
-transform = $(program_transform_name)
-NORMAL_INSTALL = :
-PRE_INSTALL = :
-POST_INSTALL = :
-NORMAL_UNINSTALL = :
-PRE_UNINSTALL = :
-POST_UNINSTALL = :
-build_triplet = @build@
-host_triplet = @host@
-@COND_ENCODER_LZMA1_TRUE@am__append_1 = \
-@COND_ENCODER_LZMA1_TRUE@ range_encoder.h \
-@COND_ENCODER_LZMA1_TRUE@ price.h \
-@COND_ENCODER_LZMA1_TRUE@ price_table.c
-
-@COND_DECODER_LZMA1_TRUE@am__append_2 = range_decoder.h
-subdir = src/liblzma/rangecoder
-DIST_COMMON = $(srcdir)/Makefile.am $(srcdir)/Makefile.in
-ACLOCAL_M4 = $(top_srcdir)/aclocal.m4
-am__aclocal_m4_deps = $(top_srcdir)/m4/acx_pthread.m4 \
- $(top_srcdir)/m4/getopt.m4 $(top_srcdir)/m4/gettext.m4 \
- $(top_srcdir)/m4/iconv.m4 $(top_srcdir)/m4/lib-ld.m4 \
- $(top_srcdir)/m4/lib-link.m4 $(top_srcdir)/m4/lib-prefix.m4 \
- $(top_srcdir)/m4/nls.m4 $(top_srcdir)/m4/po.m4 \
- $(top_srcdir)/m4/progtest.m4 $(top_srcdir)/configure.ac
-am__configure_deps = $(am__aclocal_m4_deps) $(CONFIGURE_DEPENDENCIES) \
- $(ACLOCAL_M4)
-mkinstalldirs = $(install_sh) -d
-CONFIG_HEADER = $(top_builddir)/config.h
-CONFIG_CLEAN_FILES =
-LTLIBRARIES = $(noinst_LTLIBRARIES)
-librangecoder_la_LIBADD =
-am__librangecoder_la_SOURCES_DIST = range_common.h range_encoder.h \
- price.h price_table.c range_decoder.h
-@COND_ENCODER_LZMA1_TRUE@am__objects_1 = \
-@COND_ENCODER_LZMA1_TRUE@ librangecoder_la-price_table.lo
-am__objects_2 =
-am_librangecoder_la_OBJECTS = $(am__objects_1) $(am__objects_2)
-librangecoder_la_OBJECTS = $(am_librangecoder_la_OBJECTS)
-DEFAULT_INCLUDES = -I.@am__isrc@ -I$(top_builddir)
-depcomp = $(SHELL) $(top_srcdir)/depcomp
-am__depfiles_maybe = depfiles
-COMPILE = $(CC) $(DEFS) $(DEFAULT_INCLUDES) $(INCLUDES) $(AM_CPPFLAGS) \
- $(CPPFLAGS) $(AM_CFLAGS) $(CFLAGS)
-LTCOMPILE = $(LIBTOOL) --tag=CC $(AM_LIBTOOLFLAGS) $(LIBTOOLFLAGS) \
- --mode=compile $(CC) $(DEFS) $(DEFAULT_INCLUDES) $(INCLUDES) \
- $(AM_CPPFLAGS) $(CPPFLAGS) $(AM_CFLAGS) $(CFLAGS)
-CCLD = $(CC)
-LINK = $(LIBTOOL) --tag=CC $(AM_LIBTOOLFLAGS) $(LIBTOOLFLAGS) \
- --mode=link $(CCLD) $(AM_CFLAGS) $(CFLAGS) $(AM_LDFLAGS) \
- $(LDFLAGS) -o $@
-SOURCES = $(librangecoder_la_SOURCES)
-DIST_SOURCES = $(am__librangecoder_la_SOURCES_DIST)
-ETAGS = etags
-CTAGS = ctags
-DISTFILES = $(DIST_COMMON) $(DIST_SOURCES) $(TEXINFOS) $(EXTRA_DIST)
-ACLOCAL = @ACLOCAL@
-AMTAR = @AMTAR@
-AR = @AR@
-AUTOCONF = @AUTOCONF@
-AUTOHEADER = @AUTOHEADER@
-AUTOMAKE = @AUTOMAKE@
-AWK = @AWK@
-CC = @CC@
-CCAS = @CCAS@
-CCASDEPMODE = @CCASDEPMODE@
-CCASFLAGS = @CCASFLAGS@
-CCDEPMODE = @CCDEPMODE@
-CFLAGS = @CFLAGS@
-CFLAG_VISIBILITY = @CFLAG_VISIBILITY@
-CPP = @CPP@
-CPPFLAGS = @CPPFLAGS@
-CXX = @CXX@
-CXXCPP = @CXXCPP@
-CXXDEPMODE = @CXXDEPMODE@
-CXXFLAGS = @CXXFLAGS@
-CYGPATH_W = @CYGPATH_W@
-DEFS = @DEFS@
-DEPDIR = @DEPDIR@
-DSYMUTIL = @DSYMUTIL@
-ECHO = @ECHO@
-ECHO_C = @ECHO_C@
-ECHO_N = @ECHO_N@
-ECHO_T = @ECHO_T@
-EGREP = @EGREP@
-EXEEXT = @EXEEXT@
-F77 = @F77@
-FFLAGS = @FFLAGS@
-GETOPT_H = @GETOPT_H@
-GMSGFMT = @GMSGFMT@
-GMSGFMT_015 = @GMSGFMT_015@
-GREP = @GREP@
-HAVE_VISIBILITY = @HAVE_VISIBILITY@
-INSTALL = @INSTALL@
-INSTALL_DATA = @INSTALL_DATA@
-INSTALL_PROGRAM = @INSTALL_PROGRAM@
-INSTALL_SCRIPT = @INSTALL_SCRIPT@
-INSTALL_STRIP_PROGRAM = @INSTALL_STRIP_PROGRAM@
-INTLLIBS = @INTLLIBS@
-INTL_MACOSX_LIBS = @INTL_MACOSX_LIBS@
-LDFLAGS = @LDFLAGS@
-LIBICONV = @LIBICONV@
-LIBINTL = @LIBINTL@
-LIBOBJS = @LIBOBJS@
-LIBS = @LIBS@
-LIBTOOL = @LIBTOOL@
-LN_S = @LN_S@
-LTLIBICONV = @LTLIBICONV@
-LTLIBINTL = @LTLIBINTL@
-LTLIBOBJS = @LTLIBOBJS@
-MAKEINFO = @MAKEINFO@
-MKDIR_P = @MKDIR_P@
-MSGFMT = @MSGFMT@
-MSGFMT_015 = @MSGFMT_015@
-MSGMERGE = @MSGMERGE@
-NMEDIT = @NMEDIT@
-OBJEXT = @OBJEXT@
-PACKAGE = @PACKAGE@
-PACKAGE_BUGREPORT = @PACKAGE_BUGREPORT@
-PACKAGE_NAME = @PACKAGE_NAME@
-PACKAGE_STRING = @PACKAGE_STRING@
-PACKAGE_TARNAME = @PACKAGE_TARNAME@
-PACKAGE_VERSION = @PACKAGE_VERSION@
-PATH_SEPARATOR = @PATH_SEPARATOR@
-POSUB = @POSUB@
-PTHREAD_CC = @PTHREAD_CC@
-PTHREAD_CFLAGS = @PTHREAD_CFLAGS@
-PTHREAD_LIBS = @PTHREAD_LIBS@
-RANLIB = @RANLIB@
-SED = @SED@
-SET_MAKE = @SET_MAKE@
-SHELL = @SHELL@
-STRIP = @STRIP@
-USE_NLS = @USE_NLS@
-VERSION = @VERSION@
-XGETTEXT = @XGETTEXT@
-XGETTEXT_015 = @XGETTEXT_015@
-abs_builddir = @abs_builddir@
-abs_srcdir = @abs_srcdir@
-abs_top_builddir = @abs_top_builddir@
-abs_top_srcdir = @abs_top_srcdir@
-ac_ct_CC = @ac_ct_CC@
-ac_ct_CXX = @ac_ct_CXX@
-ac_ct_F77 = @ac_ct_F77@
-acx_pthread_config = @acx_pthread_config@
-am__include = @am__include@
-am__leading_dot = @am__leading_dot@
-am__quote = @am__quote@
-am__tar = @am__tar@
-am__untar = @am__untar@
-bindir = @bindir@
-build = @build@
-build_alias = @build_alias@
-build_cpu = @build_cpu@
-build_os = @build_os@
-build_vendor = @build_vendor@
-builddir = @builddir@
-datadir = @datadir@
-datarootdir = @datarootdir@
-docdir = @docdir@
-dvidir = @dvidir@
-exec_prefix = @exec_prefix@
-host = @host@
-host_alias = @host_alias@
-host_cpu = @host_cpu@
-host_os = @host_os@
-host_vendor = @host_vendor@
-htmldir = @htmldir@
-includedir = @includedir@
-infodir = @infodir@
-install_sh = @install_sh@
-libdir = @libdir@
-libexecdir = @libexecdir@
-localedir = @localedir@
-localstatedir = @localstatedir@
-mandir = @mandir@
-mkdir_p = @mkdir_p@
-oldincludedir = @oldincludedir@
-pdfdir = @pdfdir@
-prefix = @prefix@
-program_transform_name = @program_transform_name@
-psdir = @psdir@
-sbindir = @sbindir@
-sharedstatedir = @sharedstatedir@
-srcdir = @srcdir@
-sysconfdir = @sysconfdir@
-target_alias = @target_alias@
-top_build_prefix = @top_build_prefix@
-top_builddir = @top_builddir@
-top_srcdir = @top_srcdir@
-EXTRA_DIST = price_tablegen.c
-noinst_LTLIBRARIES = librangecoder.la
-librangecoder_la_SOURCES = range_common.h $(am__append_1) \
- $(am__append_2)
-librangecoder_la_CPPFLAGS = \
- -I@top_srcdir@/src/liblzma/api \
- -I@top_srcdir@/src/liblzma/common
-
-all: all-am
-
-.SUFFIXES:
-.SUFFIXES: .c .lo .o .obj
-$(srcdir)/Makefile.in: $(srcdir)/Makefile.am $(am__configure_deps)
- @for dep in $?; do \
- case '$(am__configure_deps)' in \
- *$$dep*) \
- ( cd $(top_builddir) && $(MAKE) $(AM_MAKEFLAGS) am--refresh ) \
- && { if test -f $@; then exit 0; else break; fi; }; \
- exit 1;; \
- esac; \
- done; \
- echo ' cd $(top_srcdir) && $(AUTOMAKE) --foreign src/liblzma/rangecoder/Makefile'; \
- cd $(top_srcdir) && \
- $(AUTOMAKE) --foreign src/liblzma/rangecoder/Makefile
-.PRECIOUS: Makefile
-Makefile: $(srcdir)/Makefile.in $(top_builddir)/config.status
- @case '$?' in \
- *config.status*) \
- cd $(top_builddir) && $(MAKE) $(AM_MAKEFLAGS) am--refresh;; \
- *) \
- echo ' cd $(top_builddir) && $(SHELL) ./config.status $(subdir)/$@ $(am__depfiles_maybe)'; \
- cd $(top_builddir) && $(SHELL) ./config.status $(subdir)/$@ $(am__depfiles_maybe);; \
- esac;
-
-$(top_builddir)/config.status: $(top_srcdir)/configure $(CONFIG_STATUS_DEPENDENCIES)
- cd $(top_builddir) && $(MAKE) $(AM_MAKEFLAGS) am--refresh
-
-$(top_srcdir)/configure: $(am__configure_deps)
- cd $(top_builddir) && $(MAKE) $(AM_MAKEFLAGS) am--refresh
-$(ACLOCAL_M4): $(am__aclocal_m4_deps)
- cd $(top_builddir) && $(MAKE) $(AM_MAKEFLAGS) am--refresh
-
-clean-noinstLTLIBRARIES:
- -test -z "$(noinst_LTLIBRARIES)" || rm -f $(noinst_LTLIBRARIES)
- @list='$(noinst_LTLIBRARIES)'; for p in $$list; do \
- dir="`echo $$p | sed -e 's|/[^/]*$$||'`"; \
- test "$$dir" != "$$p" || dir=.; \
- echo "rm -f \"$${dir}/so_locations\""; \
- rm -f "$${dir}/so_locations"; \
- done
-librangecoder.la: $(librangecoder_la_OBJECTS) $(librangecoder_la_DEPENDENCIES)
- $(LINK) $(librangecoder_la_OBJECTS) $(librangecoder_la_LIBADD) $(LIBS)
-
-mostlyclean-compile:
- -rm -f *.$(OBJEXT)
-
-distclean-compile:
- -rm -f *.tab.c
-
-@AMDEP_TRUE@@am__include@ @am__quote@./$(DEPDIR)/librangecoder_la-price_table.Plo@am__quote@
-
-.c.o:
-@am__fastdepCC_TRUE@ $(COMPILE) -MT $@ -MD -MP -MF $(DEPDIR)/$*.Tpo -c -o $@ $<
-@am__fastdepCC_TRUE@ mv -f $(DEPDIR)/$*.Tpo $(DEPDIR)/$*.Po
-@AMDEP_TRUE@@am__fastdepCC_FALSE@ source='$<' object='$@' libtool=no @AMDEPBACKSLASH@
-@AMDEP_TRUE@@am__fastdepCC_FALSE@ DEPDIR=$(DEPDIR) $(CCDEPMODE) $(depcomp) @AMDEPBACKSLASH@
-@am__fastdepCC_FALSE@ $(COMPILE) -c $<
-
-.c.obj:
-@am__fastdepCC_TRUE@ $(COMPILE) -MT $@ -MD -MP -MF $(DEPDIR)/$*.Tpo -c -o $@ `$(CYGPATH_W) '$<'`
-@am__fastdepCC_TRUE@ mv -f $(DEPDIR)/$*.Tpo $(DEPDIR)/$*.Po
-@AMDEP_TRUE@@am__fastdepCC_FALSE@ source='$<' object='$@' libtool=no @AMDEPBACKSLASH@
-@AMDEP_TRUE@@am__fastdepCC_FALSE@ DEPDIR=$(DEPDIR) $(CCDEPMODE) $(depcomp) @AMDEPBACKSLASH@
-@am__fastdepCC_FALSE@ $(COMPILE) -c `$(CYGPATH_W) '$<'`
-
-.c.lo:
-@am__fastdepCC_TRUE@ $(LTCOMPILE) -MT $@ -MD -MP -MF $(DEPDIR)/$*.Tpo -c -o $@ $<
-@am__fastdepCC_TRUE@ mv -f $(DEPDIR)/$*.Tpo $(DEPDIR)/$*.Plo
-@AMDEP_TRUE@@am__fastdepCC_FALSE@ source='$<' object='$@' libtool=yes @AMDEPBACKSLASH@
-@AMDEP_TRUE@@am__fastdepCC_FALSE@ DEPDIR=$(DEPDIR) $(CCDEPMODE) $(depcomp) @AMDEPBACKSLASH@
-@am__fastdepCC_FALSE@ $(LTCOMPILE) -c -o $@ $<
-
-librangecoder_la-price_table.lo: price_table.c
-@am__fastdepCC_TRUE@ $(LIBTOOL) --tag=CC $(AM_LIBTOOLFLAGS) $(LIBTOOLFLAGS) --mode=compile $(CC) $(DEFS) $(DEFAULT_INCLUDES) $(INCLUDES) $(librangecoder_la_CPPFLAGS) $(CPPFLAGS) $(AM_CFLAGS) $(CFLAGS) -MT librangecoder_la-price_table.lo -MD -MP -MF $(DEPDIR)/librangecoder_la-price_table.Tpo -c -o librangecoder_la-price_table.lo `test -f 'price_table.c' || echo '$(srcdir)/'`price_table.c
-@am__fastdepCC_TRUE@ mv -f $(DEPDIR)/librangecoder_la-price_table.Tpo $(DEPDIR)/librangecoder_la-price_table.Plo
-@AMDEP_TRUE@@am__fastdepCC_FALSE@ source='price_table.c' object='librangecoder_la-price_table.lo' libtool=yes @AMDEPBACKSLASH@
-@AMDEP_TRUE@@am__fastdepCC_FALSE@ DEPDIR=$(DEPDIR) $(CCDEPMODE) $(depcomp) @AMDEPBACKSLASH@
-@am__fastdepCC_FALSE@ $(LIBTOOL) --tag=CC $(AM_LIBTOOLFLAGS) $(LIBTOOLFLAGS) --mode=compile $(CC) $(DEFS) $(DEFAULT_INCLUDES) $(INCLUDES) $(librangecoder_la_CPPFLAGS) $(CPPFLAGS) $(AM_CFLAGS) $(CFLAGS) -c -o librangecoder_la-price_table.lo `test -f 'price_table.c' || echo '$(srcdir)/'`price_table.c
-
-mostlyclean-libtool:
- -rm -f *.lo
-
-clean-libtool:
- -rm -rf .libs _libs
-
-ID: $(HEADERS) $(SOURCES) $(LISP) $(TAGS_FILES)
- list='$(SOURCES) $(HEADERS) $(LISP) $(TAGS_FILES)'; \
- unique=`for i in $$list; do \
- if test -f "$$i"; then echo $$i; else echo $(srcdir)/$$i; fi; \
- done | \
- $(AWK) '{ files[$$0] = 1; nonempty = 1; } \
- END { if (nonempty) { for (i in files) print i; }; }'`; \
- mkid -fID $$unique
-tags: TAGS
-
-TAGS: $(HEADERS) $(SOURCES) $(TAGS_DEPENDENCIES) \
- $(TAGS_FILES) $(LISP)
- tags=; \
- here=`pwd`; \
- list='$(SOURCES) $(HEADERS) $(LISP) $(TAGS_FILES)'; \
- unique=`for i in $$list; do \
- if test -f "$$i"; then echo $$i; else echo $(srcdir)/$$i; fi; \
- done | \
- $(AWK) '{ files[$$0] = 1; nonempty = 1; } \
- END { if (nonempty) { for (i in files) print i; }; }'`; \
- if test -z "$(ETAGS_ARGS)$$tags$$unique"; then :; else \
- test -n "$$unique" || unique=$$empty_fix; \
- $(ETAGS) $(ETAGSFLAGS) $(AM_ETAGSFLAGS) $(ETAGS_ARGS) \
- $$tags $$unique; \
- fi
-ctags: CTAGS
-CTAGS: $(HEADERS) $(SOURCES) $(TAGS_DEPENDENCIES) \
- $(TAGS_FILES) $(LISP)
- tags=; \
- list='$(SOURCES) $(HEADERS) $(LISP) $(TAGS_FILES)'; \
- unique=`for i in $$list; do \
- if test -f "$$i"; then echo $$i; else echo $(srcdir)/$$i; fi; \
- done | \
- $(AWK) '{ files[$$0] = 1; nonempty = 1; } \
- END { if (nonempty) { for (i in files) print i; }; }'`; \
- test -z "$(CTAGS_ARGS)$$tags$$unique" \
- || $(CTAGS) $(CTAGSFLAGS) $(AM_CTAGSFLAGS) $(CTAGS_ARGS) \
- $$tags $$unique
-
-GTAGS:
- here=`$(am__cd) $(top_builddir) && pwd` \
- && cd $(top_srcdir) \
- && gtags -i $(GTAGS_ARGS) $$here
-
-distclean-tags:
- -rm -f TAGS ID GTAGS GRTAGS GSYMS GPATH tags
-
-distdir: $(DISTFILES)
- @srcdirstrip=`echo "$(srcdir)" | sed 's/[].[^$$\\*]/\\\\&/g'`; \
- topsrcdirstrip=`echo "$(top_srcdir)" | sed 's/[].[^$$\\*]/\\\\&/g'`; \
- list='$(DISTFILES)'; \
- dist_files=`for file in $$list; do echo $$file; done | \
- sed -e "s|^$$srcdirstrip/||;t" \
- -e "s|^$$topsrcdirstrip/|$(top_builddir)/|;t"`; \
- case $$dist_files in \
- */*) $(MKDIR_P) `echo "$$dist_files" | \
- sed '/\//!d;s|^|$(distdir)/|;s,/[^/]*$$,,' | \
- sort -u` ;; \
- esac; \
- for file in $$dist_files; do \
- if test -f $$file || test -d $$file; then d=.; else d=$(srcdir); fi; \
- if test -d $$d/$$file; then \
- dir=`echo "/$$file" | sed -e 's,/[^/]*$$,,'`; \
- if test -d $(srcdir)/$$file && test $$d != $(srcdir); then \
- cp -pR $(srcdir)/$$file $(distdir)$$dir || exit 1; \
- fi; \
- cp -pR $$d/$$file $(distdir)$$dir || exit 1; \
- else \
- test -f $(distdir)/$$file \
- || cp -p $$d/$$file $(distdir)/$$file \
- || exit 1; \
- fi; \
- done
-check-am: all-am
-check: check-am
-all-am: Makefile $(LTLIBRARIES)
-installdirs:
-install: install-am
-install-exec: install-exec-am
-install-data: install-data-am
-uninstall: uninstall-am
-
-install-am: all-am
- @$(MAKE) $(AM_MAKEFLAGS) install-exec-am install-data-am
-
-installcheck: installcheck-am
-install-strip:
- $(MAKE) $(AM_MAKEFLAGS) INSTALL_PROGRAM="$(INSTALL_STRIP_PROGRAM)" \
- install_sh_PROGRAM="$(INSTALL_STRIP_PROGRAM)" INSTALL_STRIP_FLAG=-s \
- `test -z '$(STRIP)' || \
- echo "INSTALL_PROGRAM_ENV=STRIPPROG='$(STRIP)'"` install
-mostlyclean-generic:
-
-clean-generic:
-
-distclean-generic:
- -test -z "$(CONFIG_CLEAN_FILES)" || rm -f $(CONFIG_CLEAN_FILES)
-
-maintainer-clean-generic:
- @echo "This command is intended for maintainers to use"
- @echo "it deletes files that may require special tools to rebuild."
-clean: clean-am
-
-clean-am: clean-generic clean-libtool clean-noinstLTLIBRARIES \
- mostlyclean-am
-
-distclean: distclean-am
- -rm -rf ./$(DEPDIR)
- -rm -f Makefile
-distclean-am: clean-am distclean-compile distclean-generic \
- distclean-tags
-
-dvi: dvi-am
-
-dvi-am:
-
-html: html-am
-
-info: info-am
-
-info-am:
-
-install-data-am:
-
-install-dvi: install-dvi-am
-
-install-exec-am:
-
-install-html: install-html-am
-
-install-info: install-info-am
-
-install-man:
-
-install-pdf: install-pdf-am
-
-install-ps: install-ps-am
-
-installcheck-am:
-
-maintainer-clean: maintainer-clean-am
- -rm -rf ./$(DEPDIR)
- -rm -f Makefile
-maintainer-clean-am: distclean-am maintainer-clean-generic
-
-mostlyclean: mostlyclean-am
-
-mostlyclean-am: mostlyclean-compile mostlyclean-generic \
- mostlyclean-libtool
-
-pdf: pdf-am
-
-pdf-am:
-
-ps: ps-am
-
-ps-am:
-
-uninstall-am:
-
-.MAKE: install-am install-strip
-
-.PHONY: CTAGS GTAGS all all-am check check-am clean clean-generic \
- clean-libtool clean-noinstLTLIBRARIES ctags distclean \
- distclean-compile distclean-generic distclean-libtool \
- distclean-tags distdir dvi dvi-am html html-am info info-am \
- install install-am install-data install-data-am install-dvi \
- install-dvi-am install-exec install-exec-am install-html \
- install-html-am install-info install-info-am install-man \
- install-pdf install-pdf-am install-ps install-ps-am \
- install-strip installcheck installcheck-am installdirs \
- maintainer-clean maintainer-clean-generic mostlyclean \
- mostlyclean-compile mostlyclean-generic mostlyclean-libtool \
- pdf pdf-am ps ps-am tags uninstall uninstall-am
-
-# Tell versions [3.59,3.63) of GNU make to not export all variables.
-# Otherwise a system limit (for SysV at least) may be exceeded.
-.NOEXPORT:
diff --git a/Build/source/utils/xz-4.999.8beta/src/liblzma/simple/Makefile.am b/Build/source/utils/xz-4.999.8beta/src/liblzma/simple/Makefile.am
deleted file mode 100644
index f8cd48888ee..00000000000
--- a/Build/source/utils/xz-4.999.8beta/src/liblzma/simple/Makefile.am
+++ /dev/null
@@ -1,58 +0,0 @@
-##
-## Copyright (C) 2007 Lasse Collin
-##
-## This library is free software; you can redistribute it and/or
-## modify it under the terms of the GNU Lesser General Public
-## License as published by the Free Software Foundation; either
-## version 2.1 of the License, or (at your option) any later version.
-##
-## This library is distributed in the hope that it will be useful,
-## but WITHOUT ANY WARRANTY; without even the implied warranty of
-## MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the GNU
-## Lesser General Public License for more details.
-##
-
-noinst_LTLIBRARIES = libsimple.la
-libsimple_la_CPPFLAGS = \
- -I@top_srcdir@/src/liblzma/api \
- -I@top_srcdir@/src/liblzma/common
-libsimple_la_SOURCES = \
- simple_coder.c \
- simple_coder.h \
- simple_private.h
-
-if COND_ENCODER_SIMPLE
-libsimple_la_SOURCES += \
- simple_encoder.c \
- simple_encoder.h
-endif
-
-if COND_DECODER_SIMPLE
-libsimple_la_SOURCES += \
- simple_decoder.c \
- simple_decoder.h
-endif
-
-if COND_FILTER_X86
-libsimple_la_SOURCES += x86.c
-endif
-
-if COND_FILTER_POWERPC
-libsimple_la_SOURCES += powerpc.c
-endif
-
-if COND_FILTER_IA64
-libsimple_la_SOURCES += ia64.c
-endif
-
-if COND_FILTER_ARM
-libsimple_la_SOURCES += arm.c
-endif
-
-if COND_FILTER_ARMTHUMB
-libsimple_la_SOURCES += armthumb.c
-endif
-
-if COND_FILTER_SPARC
-libsimple_la_SOURCES += sparc.c
-endif
diff --git a/Build/source/utils/xz-4.999.8beta/src/liblzma/simple/Makefile.in b/Build/source/utils/xz-4.999.8beta/src/liblzma/simple/Makefile.in
deleted file mode 100644
index a337e5068aa..00000000000
--- a/Build/source/utils/xz-4.999.8beta/src/liblzma/simple/Makefile.in
+++ /dev/null
@@ -1,572 +0,0 @@
-# Makefile.in generated by automake 1.10.2 from Makefile.am.
-# @configure_input@
-
-# Copyright (C) 1994, 1995, 1996, 1997, 1998, 1999, 2000, 2001, 2002,
-# 2003, 2004, 2005, 2006, 2007, 2008 Free Software Foundation, Inc.
-# This Makefile.in is free software; the Free Software Foundation
-# gives unlimited permission to copy and/or distribute it,
-# with or without modifications, as long as this notice is preserved.
-
-# This program is distributed in the hope that it will be useful,
-# but WITHOUT ANY WARRANTY, to the extent permitted by law; without
-# even the implied warranty of MERCHANTABILITY or FITNESS FOR A
-# PARTICULAR PURPOSE.
-
-@SET_MAKE@
-
-VPATH = @srcdir@
-pkgdatadir = $(datadir)/@PACKAGE@
-pkglibdir = $(libdir)/@PACKAGE@
-pkgincludedir = $(includedir)/@PACKAGE@
-am__cd = CDPATH="$${ZSH_VERSION+.}$(PATH_SEPARATOR)" && cd
-install_sh_DATA = $(install_sh) -c -m 644
-install_sh_PROGRAM = $(install_sh) -c
-install_sh_SCRIPT = $(install_sh) -c
-INSTALL_HEADER = $(INSTALL_DATA)
-transform = $(program_transform_name)
-NORMAL_INSTALL = :
-PRE_INSTALL = :
-POST_INSTALL = :
-NORMAL_UNINSTALL = :
-PRE_UNINSTALL = :
-POST_UNINSTALL = :
-build_triplet = @build@
-host_triplet = @host@
-@COND_ENCODER_SIMPLE_TRUE@am__append_1 = \
-@COND_ENCODER_SIMPLE_TRUE@ simple_encoder.c \
-@COND_ENCODER_SIMPLE_TRUE@ simple_encoder.h
-
-@COND_DECODER_SIMPLE_TRUE@am__append_2 = \
-@COND_DECODER_SIMPLE_TRUE@ simple_decoder.c \
-@COND_DECODER_SIMPLE_TRUE@ simple_decoder.h
-
-@COND_FILTER_X86_TRUE@am__append_3 = x86.c
-@COND_FILTER_POWERPC_TRUE@am__append_4 = powerpc.c
-@COND_FILTER_IA64_TRUE@am__append_5 = ia64.c
-@COND_FILTER_ARM_TRUE@am__append_6 = arm.c
-@COND_FILTER_ARMTHUMB_TRUE@am__append_7 = armthumb.c
-@COND_FILTER_SPARC_TRUE@am__append_8 = sparc.c
-subdir = src/liblzma/simple
-DIST_COMMON = $(srcdir)/Makefile.am $(srcdir)/Makefile.in
-ACLOCAL_M4 = $(top_srcdir)/aclocal.m4
-am__aclocal_m4_deps = $(top_srcdir)/m4/acx_pthread.m4 \
- $(top_srcdir)/m4/getopt.m4 $(top_srcdir)/m4/gettext.m4 \
- $(top_srcdir)/m4/iconv.m4 $(top_srcdir)/m4/lib-ld.m4 \
- $(top_srcdir)/m4/lib-link.m4 $(top_srcdir)/m4/lib-prefix.m4 \
- $(top_srcdir)/m4/nls.m4 $(top_srcdir)/m4/po.m4 \
- $(top_srcdir)/m4/progtest.m4 $(top_srcdir)/configure.ac
-am__configure_deps = $(am__aclocal_m4_deps) $(CONFIGURE_DEPENDENCIES) \
- $(ACLOCAL_M4)
-mkinstalldirs = $(install_sh) -d
-CONFIG_HEADER = $(top_builddir)/config.h
-CONFIG_CLEAN_FILES =
-LTLIBRARIES = $(noinst_LTLIBRARIES)
-libsimple_la_LIBADD =
-am__libsimple_la_SOURCES_DIST = simple_coder.c simple_coder.h \
- simple_private.h simple_encoder.c simple_encoder.h \
- simple_decoder.c simple_decoder.h x86.c powerpc.c ia64.c arm.c \
- armthumb.c sparc.c
-@COND_ENCODER_SIMPLE_TRUE@am__objects_1 = \
-@COND_ENCODER_SIMPLE_TRUE@ libsimple_la-simple_encoder.lo
-@COND_DECODER_SIMPLE_TRUE@am__objects_2 = \
-@COND_DECODER_SIMPLE_TRUE@ libsimple_la-simple_decoder.lo
-@COND_FILTER_X86_TRUE@am__objects_3 = libsimple_la-x86.lo
-@COND_FILTER_POWERPC_TRUE@am__objects_4 = libsimple_la-powerpc.lo
-@COND_FILTER_IA64_TRUE@am__objects_5 = libsimple_la-ia64.lo
-@COND_FILTER_ARM_TRUE@am__objects_6 = libsimple_la-arm.lo
-@COND_FILTER_ARMTHUMB_TRUE@am__objects_7 = libsimple_la-armthumb.lo
-@COND_FILTER_SPARC_TRUE@am__objects_8 = libsimple_la-sparc.lo
-am_libsimple_la_OBJECTS = libsimple_la-simple_coder.lo \
- $(am__objects_1) $(am__objects_2) $(am__objects_3) \
- $(am__objects_4) $(am__objects_5) $(am__objects_6) \
- $(am__objects_7) $(am__objects_8)
-libsimple_la_OBJECTS = $(am_libsimple_la_OBJECTS)
-DEFAULT_INCLUDES = -I.@am__isrc@ -I$(top_builddir)
-depcomp = $(SHELL) $(top_srcdir)/depcomp
-am__depfiles_maybe = depfiles
-COMPILE = $(CC) $(DEFS) $(DEFAULT_INCLUDES) $(INCLUDES) $(AM_CPPFLAGS) \
- $(CPPFLAGS) $(AM_CFLAGS) $(CFLAGS)
-LTCOMPILE = $(LIBTOOL) --tag=CC $(AM_LIBTOOLFLAGS) $(LIBTOOLFLAGS) \
- --mode=compile $(CC) $(DEFS) $(DEFAULT_INCLUDES) $(INCLUDES) \
- $(AM_CPPFLAGS) $(CPPFLAGS) $(AM_CFLAGS) $(CFLAGS)
-CCLD = $(CC)
-LINK = $(LIBTOOL) --tag=CC $(AM_LIBTOOLFLAGS) $(LIBTOOLFLAGS) \
- --mode=link $(CCLD) $(AM_CFLAGS) $(CFLAGS) $(AM_LDFLAGS) \
- $(LDFLAGS) -o $@
-SOURCES = $(libsimple_la_SOURCES)
-DIST_SOURCES = $(am__libsimple_la_SOURCES_DIST)
-ETAGS = etags
-CTAGS = ctags
-DISTFILES = $(DIST_COMMON) $(DIST_SOURCES) $(TEXINFOS) $(EXTRA_DIST)
-ACLOCAL = @ACLOCAL@
-AMTAR = @AMTAR@
-AR = @AR@
-AUTOCONF = @AUTOCONF@
-AUTOHEADER = @AUTOHEADER@
-AUTOMAKE = @AUTOMAKE@
-AWK = @AWK@
-CC = @CC@
-CCAS = @CCAS@
-CCASDEPMODE = @CCASDEPMODE@
-CCASFLAGS = @CCASFLAGS@
-CCDEPMODE = @CCDEPMODE@
-CFLAGS = @CFLAGS@
-CFLAG_VISIBILITY = @CFLAG_VISIBILITY@
-CPP = @CPP@
-CPPFLAGS = @CPPFLAGS@
-CXX = @CXX@
-CXXCPP = @CXXCPP@
-CXXDEPMODE = @CXXDEPMODE@
-CXXFLAGS = @CXXFLAGS@
-CYGPATH_W = @CYGPATH_W@
-DEFS = @DEFS@
-DEPDIR = @DEPDIR@
-DSYMUTIL = @DSYMUTIL@
-ECHO = @ECHO@
-ECHO_C = @ECHO_C@
-ECHO_N = @ECHO_N@
-ECHO_T = @ECHO_T@
-EGREP = @EGREP@
-EXEEXT = @EXEEXT@
-F77 = @F77@
-FFLAGS = @FFLAGS@
-GETOPT_H = @GETOPT_H@
-GMSGFMT = @GMSGFMT@
-GMSGFMT_015 = @GMSGFMT_015@
-GREP = @GREP@
-HAVE_VISIBILITY = @HAVE_VISIBILITY@
-INSTALL = @INSTALL@
-INSTALL_DATA = @INSTALL_DATA@
-INSTALL_PROGRAM = @INSTALL_PROGRAM@
-INSTALL_SCRIPT = @INSTALL_SCRIPT@
-INSTALL_STRIP_PROGRAM = @INSTALL_STRIP_PROGRAM@
-INTLLIBS = @INTLLIBS@
-INTL_MACOSX_LIBS = @INTL_MACOSX_LIBS@
-LDFLAGS = @LDFLAGS@
-LIBICONV = @LIBICONV@
-LIBINTL = @LIBINTL@
-LIBOBJS = @LIBOBJS@
-LIBS = @LIBS@
-LIBTOOL = @LIBTOOL@
-LN_S = @LN_S@
-LTLIBICONV = @LTLIBICONV@
-LTLIBINTL = @LTLIBINTL@
-LTLIBOBJS = @LTLIBOBJS@
-MAKEINFO = @MAKEINFO@
-MKDIR_P = @MKDIR_P@
-MSGFMT = @MSGFMT@
-MSGFMT_015 = @MSGFMT_015@
-MSGMERGE = @MSGMERGE@
-NMEDIT = @NMEDIT@
-OBJEXT = @OBJEXT@
-PACKAGE = @PACKAGE@
-PACKAGE_BUGREPORT = @PACKAGE_BUGREPORT@
-PACKAGE_NAME = @PACKAGE_NAME@
-PACKAGE_STRING = @PACKAGE_STRING@
-PACKAGE_TARNAME = @PACKAGE_TARNAME@
-PACKAGE_VERSION = @PACKAGE_VERSION@
-PATH_SEPARATOR = @PATH_SEPARATOR@
-POSUB = @POSUB@
-PTHREAD_CC = @PTHREAD_CC@
-PTHREAD_CFLAGS = @PTHREAD_CFLAGS@
-PTHREAD_LIBS = @PTHREAD_LIBS@
-RANLIB = @RANLIB@
-SED = @SED@
-SET_MAKE = @SET_MAKE@
-SHELL = @SHELL@
-STRIP = @STRIP@
-USE_NLS = @USE_NLS@
-VERSION = @VERSION@
-XGETTEXT = @XGETTEXT@
-XGETTEXT_015 = @XGETTEXT_015@
-abs_builddir = @abs_builddir@
-abs_srcdir = @abs_srcdir@
-abs_top_builddir = @abs_top_builddir@
-abs_top_srcdir = @abs_top_srcdir@
-ac_ct_CC = @ac_ct_CC@
-ac_ct_CXX = @ac_ct_CXX@
-ac_ct_F77 = @ac_ct_F77@
-acx_pthread_config = @acx_pthread_config@
-am__include = @am__include@
-am__leading_dot = @am__leading_dot@
-am__quote = @am__quote@
-am__tar = @am__tar@
-am__untar = @am__untar@
-bindir = @bindir@
-build = @build@
-build_alias = @build_alias@
-build_cpu = @build_cpu@
-build_os = @build_os@
-build_vendor = @build_vendor@
-builddir = @builddir@
-datadir = @datadir@
-datarootdir = @datarootdir@
-docdir = @docdir@
-dvidir = @dvidir@
-exec_prefix = @exec_prefix@
-host = @host@
-host_alias = @host_alias@
-host_cpu = @host_cpu@
-host_os = @host_os@
-host_vendor = @host_vendor@
-htmldir = @htmldir@
-includedir = @includedir@
-infodir = @infodir@
-install_sh = @install_sh@
-libdir = @libdir@
-libexecdir = @libexecdir@
-localedir = @localedir@
-localstatedir = @localstatedir@
-mandir = @mandir@
-mkdir_p = @mkdir_p@
-oldincludedir = @oldincludedir@
-pdfdir = @pdfdir@
-prefix = @prefix@
-program_transform_name = @program_transform_name@
-psdir = @psdir@
-sbindir = @sbindir@
-sharedstatedir = @sharedstatedir@
-srcdir = @srcdir@
-sysconfdir = @sysconfdir@
-target_alias = @target_alias@
-top_build_prefix = @top_build_prefix@
-top_builddir = @top_builddir@
-top_srcdir = @top_srcdir@
-noinst_LTLIBRARIES = libsimple.la
-libsimple_la_CPPFLAGS = \
- -I@top_srcdir@/src/liblzma/api \
- -I@top_srcdir@/src/liblzma/common
-
-libsimple_la_SOURCES = simple_coder.c simple_coder.h simple_private.h \
- $(am__append_1) $(am__append_2) $(am__append_3) \
- $(am__append_4) $(am__append_5) $(am__append_6) \
- $(am__append_7) $(am__append_8)
-all: all-am
-
-.SUFFIXES:
-.SUFFIXES: .c .lo .o .obj
-$(srcdir)/Makefile.in: $(srcdir)/Makefile.am $(am__configure_deps)
- @for dep in $?; do \
- case '$(am__configure_deps)' in \
- *$$dep*) \
- ( cd $(top_builddir) && $(MAKE) $(AM_MAKEFLAGS) am--refresh ) \
- && { if test -f $@; then exit 0; else break; fi; }; \
- exit 1;; \
- esac; \
- done; \
- echo ' cd $(top_srcdir) && $(AUTOMAKE) --foreign src/liblzma/simple/Makefile'; \
- cd $(top_srcdir) && \
- $(AUTOMAKE) --foreign src/liblzma/simple/Makefile
-.PRECIOUS: Makefile
-Makefile: $(srcdir)/Makefile.in $(top_builddir)/config.status
- @case '$?' in \
- *config.status*) \
- cd $(top_builddir) && $(MAKE) $(AM_MAKEFLAGS) am--refresh;; \
- *) \
- echo ' cd $(top_builddir) && $(SHELL) ./config.status $(subdir)/$@ $(am__depfiles_maybe)'; \
- cd $(top_builddir) && $(SHELL) ./config.status $(subdir)/$@ $(am__depfiles_maybe);; \
- esac;
-
-$(top_builddir)/config.status: $(top_srcdir)/configure $(CONFIG_STATUS_DEPENDENCIES)
- cd $(top_builddir) && $(MAKE) $(AM_MAKEFLAGS) am--refresh
-
-$(top_srcdir)/configure: $(am__configure_deps)
- cd $(top_builddir) && $(MAKE) $(AM_MAKEFLAGS) am--refresh
-$(ACLOCAL_M4): $(am__aclocal_m4_deps)
- cd $(top_builddir) && $(MAKE) $(AM_MAKEFLAGS) am--refresh
-
-clean-noinstLTLIBRARIES:
- -test -z "$(noinst_LTLIBRARIES)" || rm -f $(noinst_LTLIBRARIES)
- @list='$(noinst_LTLIBRARIES)'; for p in $$list; do \
- dir="`echo $$p | sed -e 's|/[^/]*$$||'`"; \
- test "$$dir" != "$$p" || dir=.; \
- echo "rm -f \"$${dir}/so_locations\""; \
- rm -f "$${dir}/so_locations"; \
- done
-libsimple.la: $(libsimple_la_OBJECTS) $(libsimple_la_DEPENDENCIES)
- $(LINK) $(libsimple_la_OBJECTS) $(libsimple_la_LIBADD) $(LIBS)
-
-mostlyclean-compile:
- -rm -f *.$(OBJEXT)
-
-distclean-compile:
- -rm -f *.tab.c
-
-@AMDEP_TRUE@@am__include@ @am__quote@./$(DEPDIR)/libsimple_la-arm.Plo@am__quote@
-@AMDEP_TRUE@@am__include@ @am__quote@./$(DEPDIR)/libsimple_la-armthumb.Plo@am__quote@
-@AMDEP_TRUE@@am__include@ @am__quote@./$(DEPDIR)/libsimple_la-ia64.Plo@am__quote@
-@AMDEP_TRUE@@am__include@ @am__quote@./$(DEPDIR)/libsimple_la-powerpc.Plo@am__quote@
-@AMDEP_TRUE@@am__include@ @am__quote@./$(DEPDIR)/libsimple_la-simple_coder.Plo@am__quote@
-@AMDEP_TRUE@@am__include@ @am__quote@./$(DEPDIR)/libsimple_la-simple_decoder.Plo@am__quote@
-@AMDEP_TRUE@@am__include@ @am__quote@./$(DEPDIR)/libsimple_la-simple_encoder.Plo@am__quote@
-@AMDEP_TRUE@@am__include@ @am__quote@./$(DEPDIR)/libsimple_la-sparc.Plo@am__quote@
-@AMDEP_TRUE@@am__include@ @am__quote@./$(DEPDIR)/libsimple_la-x86.Plo@am__quote@
-
-.c.o:
-@am__fastdepCC_TRUE@ $(COMPILE) -MT $@ -MD -MP -MF $(DEPDIR)/$*.Tpo -c -o $@ $<
-@am__fastdepCC_TRUE@ mv -f $(DEPDIR)/$*.Tpo $(DEPDIR)/$*.Po
-@AMDEP_TRUE@@am__fastdepCC_FALSE@ source='$<' object='$@' libtool=no @AMDEPBACKSLASH@
-@AMDEP_TRUE@@am__fastdepCC_FALSE@ DEPDIR=$(DEPDIR) $(CCDEPMODE) $(depcomp) @AMDEPBACKSLASH@
-@am__fastdepCC_FALSE@ $(COMPILE) -c $<
-
-.c.obj:
-@am__fastdepCC_TRUE@ $(COMPILE) -MT $@ -MD -MP -MF $(DEPDIR)/$*.Tpo -c -o $@ `$(CYGPATH_W) '$<'`
-@am__fastdepCC_TRUE@ mv -f $(DEPDIR)/$*.Tpo $(DEPDIR)/$*.Po
-@AMDEP_TRUE@@am__fastdepCC_FALSE@ source='$<' object='$@' libtool=no @AMDEPBACKSLASH@
-@AMDEP_TRUE@@am__fastdepCC_FALSE@ DEPDIR=$(DEPDIR) $(CCDEPMODE) $(depcomp) @AMDEPBACKSLASH@
-@am__fastdepCC_FALSE@ $(COMPILE) -c `$(CYGPATH_W) '$<'`
-
-.c.lo:
-@am__fastdepCC_TRUE@ $(LTCOMPILE) -MT $@ -MD -MP -MF $(DEPDIR)/$*.Tpo -c -o $@ $<
-@am__fastdepCC_TRUE@ mv -f $(DEPDIR)/$*.Tpo $(DEPDIR)/$*.Plo
-@AMDEP_TRUE@@am__fastdepCC_FALSE@ source='$<' object='$@' libtool=yes @AMDEPBACKSLASH@
-@AMDEP_TRUE@@am__fastdepCC_FALSE@ DEPDIR=$(DEPDIR) $(CCDEPMODE) $(depcomp) @AMDEPBACKSLASH@
-@am__fastdepCC_FALSE@ $(LTCOMPILE) -c -o $@ $<
-
-libsimple_la-simple_coder.lo: simple_coder.c
-@am__fastdepCC_TRUE@ $(LIBTOOL) --tag=CC $(AM_LIBTOOLFLAGS) $(LIBTOOLFLAGS) --mode=compile $(CC) $(DEFS) $(DEFAULT_INCLUDES) $(INCLUDES) $(libsimple_la_CPPFLAGS) $(CPPFLAGS) $(AM_CFLAGS) $(CFLAGS) -MT libsimple_la-simple_coder.lo -MD -MP -MF $(DEPDIR)/libsimple_la-simple_coder.Tpo -c -o libsimple_la-simple_coder.lo `test -f 'simple_coder.c' || echo '$(srcdir)/'`simple_coder.c
-@am__fastdepCC_TRUE@ mv -f $(DEPDIR)/libsimple_la-simple_coder.Tpo $(DEPDIR)/libsimple_la-simple_coder.Plo
-@AMDEP_TRUE@@am__fastdepCC_FALSE@ source='simple_coder.c' object='libsimple_la-simple_coder.lo' libtool=yes @AMDEPBACKSLASH@
-@AMDEP_TRUE@@am__fastdepCC_FALSE@ DEPDIR=$(DEPDIR) $(CCDEPMODE) $(depcomp) @AMDEPBACKSLASH@
-@am__fastdepCC_FALSE@ $(LIBTOOL) --tag=CC $(AM_LIBTOOLFLAGS) $(LIBTOOLFLAGS) --mode=compile $(CC) $(DEFS) $(DEFAULT_INCLUDES) $(INCLUDES) $(libsimple_la_CPPFLAGS) $(CPPFLAGS) $(AM_CFLAGS) $(CFLAGS) -c -o libsimple_la-simple_coder.lo `test -f 'simple_coder.c' || echo '$(srcdir)/'`simple_coder.c
-
-libsimple_la-simple_encoder.lo: simple_encoder.c
-@am__fastdepCC_TRUE@ $(LIBTOOL) --tag=CC $(AM_LIBTOOLFLAGS) $(LIBTOOLFLAGS) --mode=compile $(CC) $(DEFS) $(DEFAULT_INCLUDES) $(INCLUDES) $(libsimple_la_CPPFLAGS) $(CPPFLAGS) $(AM_CFLAGS) $(CFLAGS) -MT libsimple_la-simple_encoder.lo -MD -MP -MF $(DEPDIR)/libsimple_la-simple_encoder.Tpo -c -o libsimple_la-simple_encoder.lo `test -f 'simple_encoder.c' || echo '$(srcdir)/'`simple_encoder.c
-@am__fastdepCC_TRUE@ mv -f $(DEPDIR)/libsimple_la-simple_encoder.Tpo $(DEPDIR)/libsimple_la-simple_encoder.Plo
-@AMDEP_TRUE@@am__fastdepCC_FALSE@ source='simple_encoder.c' object='libsimple_la-simple_encoder.lo' libtool=yes @AMDEPBACKSLASH@
-@AMDEP_TRUE@@am__fastdepCC_FALSE@ DEPDIR=$(DEPDIR) $(CCDEPMODE) $(depcomp) @AMDEPBACKSLASH@
-@am__fastdepCC_FALSE@ $(LIBTOOL) --tag=CC $(AM_LIBTOOLFLAGS) $(LIBTOOLFLAGS) --mode=compile $(CC) $(DEFS) $(DEFAULT_INCLUDES) $(INCLUDES) $(libsimple_la_CPPFLAGS) $(CPPFLAGS) $(AM_CFLAGS) $(CFLAGS) -c -o libsimple_la-simple_encoder.lo `test -f 'simple_encoder.c' || echo '$(srcdir)/'`simple_encoder.c
-
-libsimple_la-simple_decoder.lo: simple_decoder.c
-@am__fastdepCC_TRUE@ $(LIBTOOL) --tag=CC $(AM_LIBTOOLFLAGS) $(LIBTOOLFLAGS) --mode=compile $(CC) $(DEFS) $(DEFAULT_INCLUDES) $(INCLUDES) $(libsimple_la_CPPFLAGS) $(CPPFLAGS) $(AM_CFLAGS) $(CFLAGS) -MT libsimple_la-simple_decoder.lo -MD -MP -MF $(DEPDIR)/libsimple_la-simple_decoder.Tpo -c -o libsimple_la-simple_decoder.lo `test -f 'simple_decoder.c' || echo '$(srcdir)/'`simple_decoder.c
-@am__fastdepCC_TRUE@ mv -f $(DEPDIR)/libsimple_la-simple_decoder.Tpo $(DEPDIR)/libsimple_la-simple_decoder.Plo
-@AMDEP_TRUE@@am__fastdepCC_FALSE@ source='simple_decoder.c' object='libsimple_la-simple_decoder.lo' libtool=yes @AMDEPBACKSLASH@
-@AMDEP_TRUE@@am__fastdepCC_FALSE@ DEPDIR=$(DEPDIR) $(CCDEPMODE) $(depcomp) @AMDEPBACKSLASH@
-@am__fastdepCC_FALSE@ $(LIBTOOL) --tag=CC $(AM_LIBTOOLFLAGS) $(LIBTOOLFLAGS) --mode=compile $(CC) $(DEFS) $(DEFAULT_INCLUDES) $(INCLUDES) $(libsimple_la_CPPFLAGS) $(CPPFLAGS) $(AM_CFLAGS) $(CFLAGS) -c -o libsimple_la-simple_decoder.lo `test -f 'simple_decoder.c' || echo '$(srcdir)/'`simple_decoder.c
-
-libsimple_la-x86.lo: x86.c
-@am__fastdepCC_TRUE@ $(LIBTOOL) --tag=CC $(AM_LIBTOOLFLAGS) $(LIBTOOLFLAGS) --mode=compile $(CC) $(DEFS) $(DEFAULT_INCLUDES) $(INCLUDES) $(libsimple_la_CPPFLAGS) $(CPPFLAGS) $(AM_CFLAGS) $(CFLAGS) -MT libsimple_la-x86.lo -MD -MP -MF $(DEPDIR)/libsimple_la-x86.Tpo -c -o libsimple_la-x86.lo `test -f 'x86.c' || echo '$(srcdir)/'`x86.c
-@am__fastdepCC_TRUE@ mv -f $(DEPDIR)/libsimple_la-x86.Tpo $(DEPDIR)/libsimple_la-x86.Plo
-@AMDEP_TRUE@@am__fastdepCC_FALSE@ source='x86.c' object='libsimple_la-x86.lo' libtool=yes @AMDEPBACKSLASH@
-@AMDEP_TRUE@@am__fastdepCC_FALSE@ DEPDIR=$(DEPDIR) $(CCDEPMODE) $(depcomp) @AMDEPBACKSLASH@
-@am__fastdepCC_FALSE@ $(LIBTOOL) --tag=CC $(AM_LIBTOOLFLAGS) $(LIBTOOLFLAGS) --mode=compile $(CC) $(DEFS) $(DEFAULT_INCLUDES) $(INCLUDES) $(libsimple_la_CPPFLAGS) $(CPPFLAGS) $(AM_CFLAGS) $(CFLAGS) -c -o libsimple_la-x86.lo `test -f 'x86.c' || echo '$(srcdir)/'`x86.c
-
-libsimple_la-powerpc.lo: powerpc.c
-@am__fastdepCC_TRUE@ $(LIBTOOL) --tag=CC $(AM_LIBTOOLFLAGS) $(LIBTOOLFLAGS) --mode=compile $(CC) $(DEFS) $(DEFAULT_INCLUDES) $(INCLUDES) $(libsimple_la_CPPFLAGS) $(CPPFLAGS) $(AM_CFLAGS) $(CFLAGS) -MT libsimple_la-powerpc.lo -MD -MP -MF $(DEPDIR)/libsimple_la-powerpc.Tpo -c -o libsimple_la-powerpc.lo `test -f 'powerpc.c' || echo '$(srcdir)/'`powerpc.c
-@am__fastdepCC_TRUE@ mv -f $(DEPDIR)/libsimple_la-powerpc.Tpo $(DEPDIR)/libsimple_la-powerpc.Plo
-@AMDEP_TRUE@@am__fastdepCC_FALSE@ source='powerpc.c' object='libsimple_la-powerpc.lo' libtool=yes @AMDEPBACKSLASH@
-@AMDEP_TRUE@@am__fastdepCC_FALSE@ DEPDIR=$(DEPDIR) $(CCDEPMODE) $(depcomp) @AMDEPBACKSLASH@
-@am__fastdepCC_FALSE@ $(LIBTOOL) --tag=CC $(AM_LIBTOOLFLAGS) $(LIBTOOLFLAGS) --mode=compile $(CC) $(DEFS) $(DEFAULT_INCLUDES) $(INCLUDES) $(libsimple_la_CPPFLAGS) $(CPPFLAGS) $(AM_CFLAGS) $(CFLAGS) -c -o libsimple_la-powerpc.lo `test -f 'powerpc.c' || echo '$(srcdir)/'`powerpc.c
-
-libsimple_la-ia64.lo: ia64.c
-@am__fastdepCC_TRUE@ $(LIBTOOL) --tag=CC $(AM_LIBTOOLFLAGS) $(LIBTOOLFLAGS) --mode=compile $(CC) $(DEFS) $(DEFAULT_INCLUDES) $(INCLUDES) $(libsimple_la_CPPFLAGS) $(CPPFLAGS) $(AM_CFLAGS) $(CFLAGS) -MT libsimple_la-ia64.lo -MD -MP -MF $(DEPDIR)/libsimple_la-ia64.Tpo -c -o libsimple_la-ia64.lo `test -f 'ia64.c' || echo '$(srcdir)/'`ia64.c
-@am__fastdepCC_TRUE@ mv -f $(DEPDIR)/libsimple_la-ia64.Tpo $(DEPDIR)/libsimple_la-ia64.Plo
-@AMDEP_TRUE@@am__fastdepCC_FALSE@ source='ia64.c' object='libsimple_la-ia64.lo' libtool=yes @AMDEPBACKSLASH@
-@AMDEP_TRUE@@am__fastdepCC_FALSE@ DEPDIR=$(DEPDIR) $(CCDEPMODE) $(depcomp) @AMDEPBACKSLASH@
-@am__fastdepCC_FALSE@ $(LIBTOOL) --tag=CC $(AM_LIBTOOLFLAGS) $(LIBTOOLFLAGS) --mode=compile $(CC) $(DEFS) $(DEFAULT_INCLUDES) $(INCLUDES) $(libsimple_la_CPPFLAGS) $(CPPFLAGS) $(AM_CFLAGS) $(CFLAGS) -c -o libsimple_la-ia64.lo `test -f 'ia64.c' || echo '$(srcdir)/'`ia64.c
-
-libsimple_la-arm.lo: arm.c
-@am__fastdepCC_TRUE@ $(LIBTOOL) --tag=CC $(AM_LIBTOOLFLAGS) $(LIBTOOLFLAGS) --mode=compile $(CC) $(DEFS) $(DEFAULT_INCLUDES) $(INCLUDES) $(libsimple_la_CPPFLAGS) $(CPPFLAGS) $(AM_CFLAGS) $(CFLAGS) -MT libsimple_la-arm.lo -MD -MP -MF $(DEPDIR)/libsimple_la-arm.Tpo -c -o libsimple_la-arm.lo `test -f 'arm.c' || echo '$(srcdir)/'`arm.c
-@am__fastdepCC_TRUE@ mv -f $(DEPDIR)/libsimple_la-arm.Tpo $(DEPDIR)/libsimple_la-arm.Plo
-@AMDEP_TRUE@@am__fastdepCC_FALSE@ source='arm.c' object='libsimple_la-arm.lo' libtool=yes @AMDEPBACKSLASH@
-@AMDEP_TRUE@@am__fastdepCC_FALSE@ DEPDIR=$(DEPDIR) $(CCDEPMODE) $(depcomp) @AMDEPBACKSLASH@
-@am__fastdepCC_FALSE@ $(LIBTOOL) --tag=CC $(AM_LIBTOOLFLAGS) $(LIBTOOLFLAGS) --mode=compile $(CC) $(DEFS) $(DEFAULT_INCLUDES) $(INCLUDES) $(libsimple_la_CPPFLAGS) $(CPPFLAGS) $(AM_CFLAGS) $(CFLAGS) -c -o libsimple_la-arm.lo `test -f 'arm.c' || echo '$(srcdir)/'`arm.c
-
-libsimple_la-armthumb.lo: armthumb.c
-@am__fastdepCC_TRUE@ $(LIBTOOL) --tag=CC $(AM_LIBTOOLFLAGS) $(LIBTOOLFLAGS) --mode=compile $(CC) $(DEFS) $(DEFAULT_INCLUDES) $(INCLUDES) $(libsimple_la_CPPFLAGS) $(CPPFLAGS) $(AM_CFLAGS) $(CFLAGS) -MT libsimple_la-armthumb.lo -MD -MP -MF $(DEPDIR)/libsimple_la-armthumb.Tpo -c -o libsimple_la-armthumb.lo `test -f 'armthumb.c' || echo '$(srcdir)/'`armthumb.c
-@am__fastdepCC_TRUE@ mv -f $(DEPDIR)/libsimple_la-armthumb.Tpo $(DEPDIR)/libsimple_la-armthumb.Plo
-@AMDEP_TRUE@@am__fastdepCC_FALSE@ source='armthumb.c' object='libsimple_la-armthumb.lo' libtool=yes @AMDEPBACKSLASH@
-@AMDEP_TRUE@@am__fastdepCC_FALSE@ DEPDIR=$(DEPDIR) $(CCDEPMODE) $(depcomp) @AMDEPBACKSLASH@
-@am__fastdepCC_FALSE@ $(LIBTOOL) --tag=CC $(AM_LIBTOOLFLAGS) $(LIBTOOLFLAGS) --mode=compile $(CC) $(DEFS) $(DEFAULT_INCLUDES) $(INCLUDES) $(libsimple_la_CPPFLAGS) $(CPPFLAGS) $(AM_CFLAGS) $(CFLAGS) -c -o libsimple_la-armthumb.lo `test -f 'armthumb.c' || echo '$(srcdir)/'`armthumb.c
-
-libsimple_la-sparc.lo: sparc.c
-@am__fastdepCC_TRUE@ $(LIBTOOL) --tag=CC $(AM_LIBTOOLFLAGS) $(LIBTOOLFLAGS) --mode=compile $(CC) $(DEFS) $(DEFAULT_INCLUDES) $(INCLUDES) $(libsimple_la_CPPFLAGS) $(CPPFLAGS) $(AM_CFLAGS) $(CFLAGS) -MT libsimple_la-sparc.lo -MD -MP -MF $(DEPDIR)/libsimple_la-sparc.Tpo -c -o libsimple_la-sparc.lo `test -f 'sparc.c' || echo '$(srcdir)/'`sparc.c
-@am__fastdepCC_TRUE@ mv -f $(DEPDIR)/libsimple_la-sparc.Tpo $(DEPDIR)/libsimple_la-sparc.Plo
-@AMDEP_TRUE@@am__fastdepCC_FALSE@ source='sparc.c' object='libsimple_la-sparc.lo' libtool=yes @AMDEPBACKSLASH@
-@AMDEP_TRUE@@am__fastdepCC_FALSE@ DEPDIR=$(DEPDIR) $(CCDEPMODE) $(depcomp) @AMDEPBACKSLASH@
-@am__fastdepCC_FALSE@ $(LIBTOOL) --tag=CC $(AM_LIBTOOLFLAGS) $(LIBTOOLFLAGS) --mode=compile $(CC) $(DEFS) $(DEFAULT_INCLUDES) $(INCLUDES) $(libsimple_la_CPPFLAGS) $(CPPFLAGS) $(AM_CFLAGS) $(CFLAGS) -c -o libsimple_la-sparc.lo `test -f 'sparc.c' || echo '$(srcdir)/'`sparc.c
-
-mostlyclean-libtool:
- -rm -f *.lo
-
-clean-libtool:
- -rm -rf .libs _libs
-
-ID: $(HEADERS) $(SOURCES) $(LISP) $(TAGS_FILES)
- list='$(SOURCES) $(HEADERS) $(LISP) $(TAGS_FILES)'; \
- unique=`for i in $$list; do \
- if test -f "$$i"; then echo $$i; else echo $(srcdir)/$$i; fi; \
- done | \
- $(AWK) '{ files[$$0] = 1; nonempty = 1; } \
- END { if (nonempty) { for (i in files) print i; }; }'`; \
- mkid -fID $$unique
-tags: TAGS
-
-TAGS: $(HEADERS) $(SOURCES) $(TAGS_DEPENDENCIES) \
- $(TAGS_FILES) $(LISP)
- tags=; \
- here=`pwd`; \
- list='$(SOURCES) $(HEADERS) $(LISP) $(TAGS_FILES)'; \
- unique=`for i in $$list; do \
- if test -f "$$i"; then echo $$i; else echo $(srcdir)/$$i; fi; \
- done | \
- $(AWK) '{ files[$$0] = 1; nonempty = 1; } \
- END { if (nonempty) { for (i in files) print i; }; }'`; \
- if test -z "$(ETAGS_ARGS)$$tags$$unique"; then :; else \
- test -n "$$unique" || unique=$$empty_fix; \
- $(ETAGS) $(ETAGSFLAGS) $(AM_ETAGSFLAGS) $(ETAGS_ARGS) \
- $$tags $$unique; \
- fi
-ctags: CTAGS
-CTAGS: $(HEADERS) $(SOURCES) $(TAGS_DEPENDENCIES) \
- $(TAGS_FILES) $(LISP)
- tags=; \
- list='$(SOURCES) $(HEADERS) $(LISP) $(TAGS_FILES)'; \
- unique=`for i in $$list; do \
- if test -f "$$i"; then echo $$i; else echo $(srcdir)/$$i; fi; \
- done | \
- $(AWK) '{ files[$$0] = 1; nonempty = 1; } \
- END { if (nonempty) { for (i in files) print i; }; }'`; \
- test -z "$(CTAGS_ARGS)$$tags$$unique" \
- || $(CTAGS) $(CTAGSFLAGS) $(AM_CTAGSFLAGS) $(CTAGS_ARGS) \
- $$tags $$unique
-
-GTAGS:
- here=`$(am__cd) $(top_builddir) && pwd` \
- && cd $(top_srcdir) \
- && gtags -i $(GTAGS_ARGS) $$here
-
-distclean-tags:
- -rm -f TAGS ID GTAGS GRTAGS GSYMS GPATH tags
-
-distdir: $(DISTFILES)
- @srcdirstrip=`echo "$(srcdir)" | sed 's/[].[^$$\\*]/\\\\&/g'`; \
- topsrcdirstrip=`echo "$(top_srcdir)" | sed 's/[].[^$$\\*]/\\\\&/g'`; \
- list='$(DISTFILES)'; \
- dist_files=`for file in $$list; do echo $$file; done | \
- sed -e "s|^$$srcdirstrip/||;t" \
- -e "s|^$$topsrcdirstrip/|$(top_builddir)/|;t"`; \
- case $$dist_files in \
- */*) $(MKDIR_P) `echo "$$dist_files" | \
- sed '/\//!d;s|^|$(distdir)/|;s,/[^/]*$$,,' | \
- sort -u` ;; \
- esac; \
- for file in $$dist_files; do \
- if test -f $$file || test -d $$file; then d=.; else d=$(srcdir); fi; \
- if test -d $$d/$$file; then \
- dir=`echo "/$$file" | sed -e 's,/[^/]*$$,,'`; \
- if test -d $(srcdir)/$$file && test $$d != $(srcdir); then \
- cp -pR $(srcdir)/$$file $(distdir)$$dir || exit 1; \
- fi; \
- cp -pR $$d/$$file $(distdir)$$dir || exit 1; \
- else \
- test -f $(distdir)/$$file \
- || cp -p $$d/$$file $(distdir)/$$file \
- || exit 1; \
- fi; \
- done
-check-am: all-am
-check: check-am
-all-am: Makefile $(LTLIBRARIES)
-installdirs:
-install: install-am
-install-exec: install-exec-am
-install-data: install-data-am
-uninstall: uninstall-am
-
-install-am: all-am
- @$(MAKE) $(AM_MAKEFLAGS) install-exec-am install-data-am
-
-installcheck: installcheck-am
-install-strip:
- $(MAKE) $(AM_MAKEFLAGS) INSTALL_PROGRAM="$(INSTALL_STRIP_PROGRAM)" \
- install_sh_PROGRAM="$(INSTALL_STRIP_PROGRAM)" INSTALL_STRIP_FLAG=-s \
- `test -z '$(STRIP)' || \
- echo "INSTALL_PROGRAM_ENV=STRIPPROG='$(STRIP)'"` install
-mostlyclean-generic:
-
-clean-generic:
-
-distclean-generic:
- -test -z "$(CONFIG_CLEAN_FILES)" || rm -f $(CONFIG_CLEAN_FILES)
-
-maintainer-clean-generic:
- @echo "This command is intended for maintainers to use"
- @echo "it deletes files that may require special tools to rebuild."
-clean: clean-am
-
-clean-am: clean-generic clean-libtool clean-noinstLTLIBRARIES \
- mostlyclean-am
-
-distclean: distclean-am
- -rm -rf ./$(DEPDIR)
- -rm -f Makefile
-distclean-am: clean-am distclean-compile distclean-generic \
- distclean-tags
-
-dvi: dvi-am
-
-dvi-am:
-
-html: html-am
-
-info: info-am
-
-info-am:
-
-install-data-am:
-
-install-dvi: install-dvi-am
-
-install-exec-am:
-
-install-html: install-html-am
-
-install-info: install-info-am
-
-install-man:
-
-install-pdf: install-pdf-am
-
-install-ps: install-ps-am
-
-installcheck-am:
-
-maintainer-clean: maintainer-clean-am
- -rm -rf ./$(DEPDIR)
- -rm -f Makefile
-maintainer-clean-am: distclean-am maintainer-clean-generic
-
-mostlyclean: mostlyclean-am
-
-mostlyclean-am: mostlyclean-compile mostlyclean-generic \
- mostlyclean-libtool
-
-pdf: pdf-am
-
-pdf-am:
-
-ps: ps-am
-
-ps-am:
-
-uninstall-am:
-
-.MAKE: install-am install-strip
-
-.PHONY: CTAGS GTAGS all all-am check check-am clean clean-generic \
- clean-libtool clean-noinstLTLIBRARIES ctags distclean \
- distclean-compile distclean-generic distclean-libtool \
- distclean-tags distdir dvi dvi-am html html-am info info-am \
- install install-am install-data install-data-am install-dvi \
- install-dvi-am install-exec install-exec-am install-html \
- install-html-am install-info install-info-am install-man \
- install-pdf install-pdf-am install-ps install-ps-am \
- install-strip installcheck installcheck-am installdirs \
- maintainer-clean maintainer-clean-generic mostlyclean \
- mostlyclean-compile mostlyclean-generic mostlyclean-libtool \
- pdf pdf-am ps ps-am tags uninstall uninstall-am
-
-# Tell versions [3.59,3.63) of GNU make to not export all variables.
-# Otherwise a system limit (for SysV at least) may be exceeded.
-.NOEXPORT:
diff --git a/Build/source/utils/xz-4.999.8beta/src/liblzma/simple/simple_decoder.h b/Build/source/utils/xz-4.999.8beta/src/liblzma/simple/simple_decoder.h
deleted file mode 100644
index 7d1f3d354fe..00000000000
--- a/Build/source/utils/xz-4.999.8beta/src/liblzma/simple/simple_decoder.h
+++ /dev/null
@@ -1,29 +0,0 @@
-///////////////////////////////////////////////////////////////////////////////
-//
-/// \file simple_decoder.h
-/// \brief Properties decoder for simple filters
-//
-// Copyright (C) 2007-2008 Lasse Collin
-//
-// This library is free software; you can redistribute it and/or
-// modify it under the terms of the GNU Lesser General Public
-// License as published by the Free Software Foundation; either
-// version 2.1 of the License, or (at your option) any later version.
-//
-// This library is distributed in the hope that it will be useful,
-// but WITHOUT ANY WARRANTY; without even the implied warranty of
-// MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the GNU
-// Lesser General Public License for more details.
-//
-///////////////////////////////////////////////////////////////////////////////
-
-#ifndef LZMA_SIMPLE_DECODER_H
-#define LZMA_SIMPLE_DECODER_H
-
-#include "simple_coder.h"
-
-extern lzma_ret lzma_simple_props_decode(
- void **options, lzma_allocator *allocator,
- const uint8_t *props, size_t props_size);
-
-#endif
diff --git a/Build/source/utils/xz-4.999.8beta/src/liblzma/simple/simple_encoder.h b/Build/source/utils/xz-4.999.8beta/src/liblzma/simple/simple_encoder.h
deleted file mode 100644
index be4ca9fccaf..00000000000
--- a/Build/source/utils/xz-4.999.8beta/src/liblzma/simple/simple_encoder.h
+++ /dev/null
@@ -1,30 +0,0 @@
-///////////////////////////////////////////////////////////////////////////////
-//
-/// \file simple_encoder.c
-/// \brief Properties encoder for simple filters
-//
-// Copyright (C) 2007-2008 Lasse Collin
-//
-// This library is free software; you can redistribute it and/or
-// modify it under the terms of the GNU Lesser General Public
-// License as published by the Free Software Foundation; either
-// version 2.1 of the License, or (at your option) any later version.
-//
-// This library is distributed in the hope that it will be useful,
-// but WITHOUT ANY WARRANTY; without even the implied warranty of
-// MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the GNU
-// Lesser General Public License for more details.
-//
-///////////////////////////////////////////////////////////////////////////////
-
-#ifndef LZMA_SIMPLE_ENCODER_H
-#define LZMA_SIMPLE_ENCODER_H
-
-#include "simple_coder.h"
-
-
-extern lzma_ret lzma_simple_props_size(uint32_t *size, const void *options);
-
-extern lzma_ret lzma_simple_props_encode(const void *options, uint8_t *out);
-
-#endif
diff --git a/Build/source/utils/xz-4.999.8beta/src/liblzma/subblock/Makefile.am b/Build/source/utils/xz-4.999.8beta/src/liblzma/subblock/Makefile.am
deleted file mode 100644
index 2577e0b4738..00000000000
--- a/Build/source/utils/xz-4.999.8beta/src/liblzma/subblock/Makefile.am
+++ /dev/null
@@ -1,33 +0,0 @@
-##
-## Copyright (C) 2007 Lasse Collin
-##
-## This library is free software; you can redistribute it and/or
-## modify it under the terms of the GNU Lesser General Public
-## License as published by the Free Software Foundation; either
-## version 2.1 of the License, or (at your option) any later version.
-##
-## This library is distributed in the hope that it will be useful,
-## but WITHOUT ANY WARRANTY; without even the implied warranty of
-## MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the GNU
-## Lesser General Public License for more details.
-##
-
-noinst_LTLIBRARIES = libsubblock.la
-libsubblock_la_SOURCES =
-libsubblock_la_CPPFLAGS = \
- -I@top_srcdir@/src/liblzma/api \
- -I@top_srcdir@/src/liblzma/common
-
-if COND_ENCODER_SUBBLOCK
-libsubblock_la_SOURCES += \
- subblock_encoder.c \
- subblock_encoder.h
-endif
-
-if COND_DECODER_SUBBLOCK
-libsubblock_la_SOURCES += \
- subblock_decoder.c \
- subblock_decoder.h \
- subblock_decoder_helper.c \
- subblock_decoder_helper.h
-endif
diff --git a/Build/source/utils/xz-4.999.8beta/src/liblzma/subblock/Makefile.in b/Build/source/utils/xz-4.999.8beta/src/liblzma/subblock/Makefile.in
deleted file mode 100644
index fef9339ab6d..00000000000
--- a/Build/source/utils/xz-4.999.8beta/src/liblzma/subblock/Makefile.in
+++ /dev/null
@@ -1,506 +0,0 @@
-# Makefile.in generated by automake 1.10.2 from Makefile.am.
-# @configure_input@
-
-# Copyright (C) 1994, 1995, 1996, 1997, 1998, 1999, 2000, 2001, 2002,
-# 2003, 2004, 2005, 2006, 2007, 2008 Free Software Foundation, Inc.
-# This Makefile.in is free software; the Free Software Foundation
-# gives unlimited permission to copy and/or distribute it,
-# with or without modifications, as long as this notice is preserved.
-
-# This program is distributed in the hope that it will be useful,
-# but WITHOUT ANY WARRANTY, to the extent permitted by law; without
-# even the implied warranty of MERCHANTABILITY or FITNESS FOR A
-# PARTICULAR PURPOSE.
-
-@SET_MAKE@
-
-VPATH = @srcdir@
-pkgdatadir = $(datadir)/@PACKAGE@
-pkglibdir = $(libdir)/@PACKAGE@
-pkgincludedir = $(includedir)/@PACKAGE@
-am__cd = CDPATH="$${ZSH_VERSION+.}$(PATH_SEPARATOR)" && cd
-install_sh_DATA = $(install_sh) -c -m 644
-install_sh_PROGRAM = $(install_sh) -c
-install_sh_SCRIPT = $(install_sh) -c
-INSTALL_HEADER = $(INSTALL_DATA)
-transform = $(program_transform_name)
-NORMAL_INSTALL = :
-PRE_INSTALL = :
-POST_INSTALL = :
-NORMAL_UNINSTALL = :
-PRE_UNINSTALL = :
-POST_UNINSTALL = :
-build_triplet = @build@
-host_triplet = @host@
-@COND_ENCODER_SUBBLOCK_TRUE@am__append_1 = \
-@COND_ENCODER_SUBBLOCK_TRUE@ subblock_encoder.c \
-@COND_ENCODER_SUBBLOCK_TRUE@ subblock_encoder.h
-
-@COND_DECODER_SUBBLOCK_TRUE@am__append_2 = \
-@COND_DECODER_SUBBLOCK_TRUE@ subblock_decoder.c \
-@COND_DECODER_SUBBLOCK_TRUE@ subblock_decoder.h \
-@COND_DECODER_SUBBLOCK_TRUE@ subblock_decoder_helper.c \
-@COND_DECODER_SUBBLOCK_TRUE@ subblock_decoder_helper.h
-
-subdir = src/liblzma/subblock
-DIST_COMMON = $(srcdir)/Makefile.am $(srcdir)/Makefile.in
-ACLOCAL_M4 = $(top_srcdir)/aclocal.m4
-am__aclocal_m4_deps = $(top_srcdir)/m4/acx_pthread.m4 \
- $(top_srcdir)/m4/getopt.m4 $(top_srcdir)/m4/gettext.m4 \
- $(top_srcdir)/m4/iconv.m4 $(top_srcdir)/m4/lib-ld.m4 \
- $(top_srcdir)/m4/lib-link.m4 $(top_srcdir)/m4/lib-prefix.m4 \
- $(top_srcdir)/m4/nls.m4 $(top_srcdir)/m4/po.m4 \
- $(top_srcdir)/m4/progtest.m4 $(top_srcdir)/configure.ac
-am__configure_deps = $(am__aclocal_m4_deps) $(CONFIGURE_DEPENDENCIES) \
- $(ACLOCAL_M4)
-mkinstalldirs = $(install_sh) -d
-CONFIG_HEADER = $(top_builddir)/config.h
-CONFIG_CLEAN_FILES =
-LTLIBRARIES = $(noinst_LTLIBRARIES)
-libsubblock_la_LIBADD =
-am__libsubblock_la_SOURCES_DIST = subblock_encoder.c \
- subblock_encoder.h subblock_decoder.c subblock_decoder.h \
- subblock_decoder_helper.c subblock_decoder_helper.h
-@COND_ENCODER_SUBBLOCK_TRUE@am__objects_1 = libsubblock_la-subblock_encoder.lo
-@COND_DECODER_SUBBLOCK_TRUE@am__objects_2 = libsubblock_la-subblock_decoder.lo \
-@COND_DECODER_SUBBLOCK_TRUE@ libsubblock_la-subblock_decoder_helper.lo
-am_libsubblock_la_OBJECTS = $(am__objects_1) $(am__objects_2)
-libsubblock_la_OBJECTS = $(am_libsubblock_la_OBJECTS)
-DEFAULT_INCLUDES = -I.@am__isrc@ -I$(top_builddir)
-depcomp = $(SHELL) $(top_srcdir)/depcomp
-am__depfiles_maybe = depfiles
-COMPILE = $(CC) $(DEFS) $(DEFAULT_INCLUDES) $(INCLUDES) $(AM_CPPFLAGS) \
- $(CPPFLAGS) $(AM_CFLAGS) $(CFLAGS)
-LTCOMPILE = $(LIBTOOL) --tag=CC $(AM_LIBTOOLFLAGS) $(LIBTOOLFLAGS) \
- --mode=compile $(CC) $(DEFS) $(DEFAULT_INCLUDES) $(INCLUDES) \
- $(AM_CPPFLAGS) $(CPPFLAGS) $(AM_CFLAGS) $(CFLAGS)
-CCLD = $(CC)
-LINK = $(LIBTOOL) --tag=CC $(AM_LIBTOOLFLAGS) $(LIBTOOLFLAGS) \
- --mode=link $(CCLD) $(AM_CFLAGS) $(CFLAGS) $(AM_LDFLAGS) \
- $(LDFLAGS) -o $@
-SOURCES = $(libsubblock_la_SOURCES)
-DIST_SOURCES = $(am__libsubblock_la_SOURCES_DIST)
-ETAGS = etags
-CTAGS = ctags
-DISTFILES = $(DIST_COMMON) $(DIST_SOURCES) $(TEXINFOS) $(EXTRA_DIST)
-ACLOCAL = @ACLOCAL@
-AMTAR = @AMTAR@
-AR = @AR@
-AUTOCONF = @AUTOCONF@
-AUTOHEADER = @AUTOHEADER@
-AUTOMAKE = @AUTOMAKE@
-AWK = @AWK@
-CC = @CC@
-CCAS = @CCAS@
-CCASDEPMODE = @CCASDEPMODE@
-CCASFLAGS = @CCASFLAGS@
-CCDEPMODE = @CCDEPMODE@
-CFLAGS = @CFLAGS@
-CFLAG_VISIBILITY = @CFLAG_VISIBILITY@
-CPP = @CPP@
-CPPFLAGS = @CPPFLAGS@
-CXX = @CXX@
-CXXCPP = @CXXCPP@
-CXXDEPMODE = @CXXDEPMODE@
-CXXFLAGS = @CXXFLAGS@
-CYGPATH_W = @CYGPATH_W@
-DEFS = @DEFS@
-DEPDIR = @DEPDIR@
-DSYMUTIL = @DSYMUTIL@
-ECHO = @ECHO@
-ECHO_C = @ECHO_C@
-ECHO_N = @ECHO_N@
-ECHO_T = @ECHO_T@
-EGREP = @EGREP@
-EXEEXT = @EXEEXT@
-F77 = @F77@
-FFLAGS = @FFLAGS@
-GETOPT_H = @GETOPT_H@
-GMSGFMT = @GMSGFMT@
-GMSGFMT_015 = @GMSGFMT_015@
-GREP = @GREP@
-HAVE_VISIBILITY = @HAVE_VISIBILITY@
-INSTALL = @INSTALL@
-INSTALL_DATA = @INSTALL_DATA@
-INSTALL_PROGRAM = @INSTALL_PROGRAM@
-INSTALL_SCRIPT = @INSTALL_SCRIPT@
-INSTALL_STRIP_PROGRAM = @INSTALL_STRIP_PROGRAM@
-INTLLIBS = @INTLLIBS@
-INTL_MACOSX_LIBS = @INTL_MACOSX_LIBS@
-LDFLAGS = @LDFLAGS@
-LIBICONV = @LIBICONV@
-LIBINTL = @LIBINTL@
-LIBOBJS = @LIBOBJS@
-LIBS = @LIBS@
-LIBTOOL = @LIBTOOL@
-LN_S = @LN_S@
-LTLIBICONV = @LTLIBICONV@
-LTLIBINTL = @LTLIBINTL@
-LTLIBOBJS = @LTLIBOBJS@
-MAKEINFO = @MAKEINFO@
-MKDIR_P = @MKDIR_P@
-MSGFMT = @MSGFMT@
-MSGFMT_015 = @MSGFMT_015@
-MSGMERGE = @MSGMERGE@
-NMEDIT = @NMEDIT@
-OBJEXT = @OBJEXT@
-PACKAGE = @PACKAGE@
-PACKAGE_BUGREPORT = @PACKAGE_BUGREPORT@
-PACKAGE_NAME = @PACKAGE_NAME@
-PACKAGE_STRING = @PACKAGE_STRING@
-PACKAGE_TARNAME = @PACKAGE_TARNAME@
-PACKAGE_VERSION = @PACKAGE_VERSION@
-PATH_SEPARATOR = @PATH_SEPARATOR@
-POSUB = @POSUB@
-PTHREAD_CC = @PTHREAD_CC@
-PTHREAD_CFLAGS = @PTHREAD_CFLAGS@
-PTHREAD_LIBS = @PTHREAD_LIBS@
-RANLIB = @RANLIB@
-SED = @SED@
-SET_MAKE = @SET_MAKE@
-SHELL = @SHELL@
-STRIP = @STRIP@
-USE_NLS = @USE_NLS@
-VERSION = @VERSION@
-XGETTEXT = @XGETTEXT@
-XGETTEXT_015 = @XGETTEXT_015@
-abs_builddir = @abs_builddir@
-abs_srcdir = @abs_srcdir@
-abs_top_builddir = @abs_top_builddir@
-abs_top_srcdir = @abs_top_srcdir@
-ac_ct_CC = @ac_ct_CC@
-ac_ct_CXX = @ac_ct_CXX@
-ac_ct_F77 = @ac_ct_F77@
-acx_pthread_config = @acx_pthread_config@
-am__include = @am__include@
-am__leading_dot = @am__leading_dot@
-am__quote = @am__quote@
-am__tar = @am__tar@
-am__untar = @am__untar@
-bindir = @bindir@
-build = @build@
-build_alias = @build_alias@
-build_cpu = @build_cpu@
-build_os = @build_os@
-build_vendor = @build_vendor@
-builddir = @builddir@
-datadir = @datadir@
-datarootdir = @datarootdir@
-docdir = @docdir@
-dvidir = @dvidir@
-exec_prefix = @exec_prefix@
-host = @host@
-host_alias = @host_alias@
-host_cpu = @host_cpu@
-host_os = @host_os@
-host_vendor = @host_vendor@
-htmldir = @htmldir@
-includedir = @includedir@
-infodir = @infodir@
-install_sh = @install_sh@
-libdir = @libdir@
-libexecdir = @libexecdir@
-localedir = @localedir@
-localstatedir = @localstatedir@
-mandir = @mandir@
-mkdir_p = @mkdir_p@
-oldincludedir = @oldincludedir@
-pdfdir = @pdfdir@
-prefix = @prefix@
-program_transform_name = @program_transform_name@
-psdir = @psdir@
-sbindir = @sbindir@
-sharedstatedir = @sharedstatedir@
-srcdir = @srcdir@
-sysconfdir = @sysconfdir@
-target_alias = @target_alias@
-top_build_prefix = @top_build_prefix@
-top_builddir = @top_builddir@
-top_srcdir = @top_srcdir@
-noinst_LTLIBRARIES = libsubblock.la
-libsubblock_la_SOURCES = $(am__append_1) $(am__append_2)
-libsubblock_la_CPPFLAGS = \
- -I@top_srcdir@/src/liblzma/api \
- -I@top_srcdir@/src/liblzma/common
-
-all: all-am
-
-.SUFFIXES:
-.SUFFIXES: .c .lo .o .obj
-$(srcdir)/Makefile.in: $(srcdir)/Makefile.am $(am__configure_deps)
- @for dep in $?; do \
- case '$(am__configure_deps)' in \
- *$$dep*) \
- ( cd $(top_builddir) && $(MAKE) $(AM_MAKEFLAGS) am--refresh ) \
- && { if test -f $@; then exit 0; else break; fi; }; \
- exit 1;; \
- esac; \
- done; \
- echo ' cd $(top_srcdir) && $(AUTOMAKE) --foreign src/liblzma/subblock/Makefile'; \
- cd $(top_srcdir) && \
- $(AUTOMAKE) --foreign src/liblzma/subblock/Makefile
-.PRECIOUS: Makefile
-Makefile: $(srcdir)/Makefile.in $(top_builddir)/config.status
- @case '$?' in \
- *config.status*) \
- cd $(top_builddir) && $(MAKE) $(AM_MAKEFLAGS) am--refresh;; \
- *) \
- echo ' cd $(top_builddir) && $(SHELL) ./config.status $(subdir)/$@ $(am__depfiles_maybe)'; \
- cd $(top_builddir) && $(SHELL) ./config.status $(subdir)/$@ $(am__depfiles_maybe);; \
- esac;
-
-$(top_builddir)/config.status: $(top_srcdir)/configure $(CONFIG_STATUS_DEPENDENCIES)
- cd $(top_builddir) && $(MAKE) $(AM_MAKEFLAGS) am--refresh
-
-$(top_srcdir)/configure: $(am__configure_deps)
- cd $(top_builddir) && $(MAKE) $(AM_MAKEFLAGS) am--refresh
-$(ACLOCAL_M4): $(am__aclocal_m4_deps)
- cd $(top_builddir) && $(MAKE) $(AM_MAKEFLAGS) am--refresh
-
-clean-noinstLTLIBRARIES:
- -test -z "$(noinst_LTLIBRARIES)" || rm -f $(noinst_LTLIBRARIES)
- @list='$(noinst_LTLIBRARIES)'; for p in $$list; do \
- dir="`echo $$p | sed -e 's|/[^/]*$$||'`"; \
- test "$$dir" != "$$p" || dir=.; \
- echo "rm -f \"$${dir}/so_locations\""; \
- rm -f "$${dir}/so_locations"; \
- done
-libsubblock.la: $(libsubblock_la_OBJECTS) $(libsubblock_la_DEPENDENCIES)
- $(LINK) $(libsubblock_la_OBJECTS) $(libsubblock_la_LIBADD) $(LIBS)
-
-mostlyclean-compile:
- -rm -f *.$(OBJEXT)
-
-distclean-compile:
- -rm -f *.tab.c
-
-@AMDEP_TRUE@@am__include@ @am__quote@./$(DEPDIR)/libsubblock_la-subblock_decoder.Plo@am__quote@
-@AMDEP_TRUE@@am__include@ @am__quote@./$(DEPDIR)/libsubblock_la-subblock_decoder_helper.Plo@am__quote@
-@AMDEP_TRUE@@am__include@ @am__quote@./$(DEPDIR)/libsubblock_la-subblock_encoder.Plo@am__quote@
-
-.c.o:
-@am__fastdepCC_TRUE@ $(COMPILE) -MT $@ -MD -MP -MF $(DEPDIR)/$*.Tpo -c -o $@ $<
-@am__fastdepCC_TRUE@ mv -f $(DEPDIR)/$*.Tpo $(DEPDIR)/$*.Po
-@AMDEP_TRUE@@am__fastdepCC_FALSE@ source='$<' object='$@' libtool=no @AMDEPBACKSLASH@
-@AMDEP_TRUE@@am__fastdepCC_FALSE@ DEPDIR=$(DEPDIR) $(CCDEPMODE) $(depcomp) @AMDEPBACKSLASH@
-@am__fastdepCC_FALSE@ $(COMPILE) -c $<
-
-.c.obj:
-@am__fastdepCC_TRUE@ $(COMPILE) -MT $@ -MD -MP -MF $(DEPDIR)/$*.Tpo -c -o $@ `$(CYGPATH_W) '$<'`
-@am__fastdepCC_TRUE@ mv -f $(DEPDIR)/$*.Tpo $(DEPDIR)/$*.Po
-@AMDEP_TRUE@@am__fastdepCC_FALSE@ source='$<' object='$@' libtool=no @AMDEPBACKSLASH@
-@AMDEP_TRUE@@am__fastdepCC_FALSE@ DEPDIR=$(DEPDIR) $(CCDEPMODE) $(depcomp) @AMDEPBACKSLASH@
-@am__fastdepCC_FALSE@ $(COMPILE) -c `$(CYGPATH_W) '$<'`
-
-.c.lo:
-@am__fastdepCC_TRUE@ $(LTCOMPILE) -MT $@ -MD -MP -MF $(DEPDIR)/$*.Tpo -c -o $@ $<
-@am__fastdepCC_TRUE@ mv -f $(DEPDIR)/$*.Tpo $(DEPDIR)/$*.Plo
-@AMDEP_TRUE@@am__fastdepCC_FALSE@ source='$<' object='$@' libtool=yes @AMDEPBACKSLASH@
-@AMDEP_TRUE@@am__fastdepCC_FALSE@ DEPDIR=$(DEPDIR) $(CCDEPMODE) $(depcomp) @AMDEPBACKSLASH@
-@am__fastdepCC_FALSE@ $(LTCOMPILE) -c -o $@ $<
-
-libsubblock_la-subblock_encoder.lo: subblock_encoder.c
-@am__fastdepCC_TRUE@ $(LIBTOOL) --tag=CC $(AM_LIBTOOLFLAGS) $(LIBTOOLFLAGS) --mode=compile $(CC) $(DEFS) $(DEFAULT_INCLUDES) $(INCLUDES) $(libsubblock_la_CPPFLAGS) $(CPPFLAGS) $(AM_CFLAGS) $(CFLAGS) -MT libsubblock_la-subblock_encoder.lo -MD -MP -MF $(DEPDIR)/libsubblock_la-subblock_encoder.Tpo -c -o libsubblock_la-subblock_encoder.lo `test -f 'subblock_encoder.c' || echo '$(srcdir)/'`subblock_encoder.c
-@am__fastdepCC_TRUE@ mv -f $(DEPDIR)/libsubblock_la-subblock_encoder.Tpo $(DEPDIR)/libsubblock_la-subblock_encoder.Plo
-@AMDEP_TRUE@@am__fastdepCC_FALSE@ source='subblock_encoder.c' object='libsubblock_la-subblock_encoder.lo' libtool=yes @AMDEPBACKSLASH@
-@AMDEP_TRUE@@am__fastdepCC_FALSE@ DEPDIR=$(DEPDIR) $(CCDEPMODE) $(depcomp) @AMDEPBACKSLASH@
-@am__fastdepCC_FALSE@ $(LIBTOOL) --tag=CC $(AM_LIBTOOLFLAGS) $(LIBTOOLFLAGS) --mode=compile $(CC) $(DEFS) $(DEFAULT_INCLUDES) $(INCLUDES) $(libsubblock_la_CPPFLAGS) $(CPPFLAGS) $(AM_CFLAGS) $(CFLAGS) -c -o libsubblock_la-subblock_encoder.lo `test -f 'subblock_encoder.c' || echo '$(srcdir)/'`subblock_encoder.c
-
-libsubblock_la-subblock_decoder.lo: subblock_decoder.c
-@am__fastdepCC_TRUE@ $(LIBTOOL) --tag=CC $(AM_LIBTOOLFLAGS) $(LIBTOOLFLAGS) --mode=compile $(CC) $(DEFS) $(DEFAULT_INCLUDES) $(INCLUDES) $(libsubblock_la_CPPFLAGS) $(CPPFLAGS) $(AM_CFLAGS) $(CFLAGS) -MT libsubblock_la-subblock_decoder.lo -MD -MP -MF $(DEPDIR)/libsubblock_la-subblock_decoder.Tpo -c -o libsubblock_la-subblock_decoder.lo `test -f 'subblock_decoder.c' || echo '$(srcdir)/'`subblock_decoder.c
-@am__fastdepCC_TRUE@ mv -f $(DEPDIR)/libsubblock_la-subblock_decoder.Tpo $(DEPDIR)/libsubblock_la-subblock_decoder.Plo
-@AMDEP_TRUE@@am__fastdepCC_FALSE@ source='subblock_decoder.c' object='libsubblock_la-subblock_decoder.lo' libtool=yes @AMDEPBACKSLASH@
-@AMDEP_TRUE@@am__fastdepCC_FALSE@ DEPDIR=$(DEPDIR) $(CCDEPMODE) $(depcomp) @AMDEPBACKSLASH@
-@am__fastdepCC_FALSE@ $(LIBTOOL) --tag=CC $(AM_LIBTOOLFLAGS) $(LIBTOOLFLAGS) --mode=compile $(CC) $(DEFS) $(DEFAULT_INCLUDES) $(INCLUDES) $(libsubblock_la_CPPFLAGS) $(CPPFLAGS) $(AM_CFLAGS) $(CFLAGS) -c -o libsubblock_la-subblock_decoder.lo `test -f 'subblock_decoder.c' || echo '$(srcdir)/'`subblock_decoder.c
-
-libsubblock_la-subblock_decoder_helper.lo: subblock_decoder_helper.c
-@am__fastdepCC_TRUE@ $(LIBTOOL) --tag=CC $(AM_LIBTOOLFLAGS) $(LIBTOOLFLAGS) --mode=compile $(CC) $(DEFS) $(DEFAULT_INCLUDES) $(INCLUDES) $(libsubblock_la_CPPFLAGS) $(CPPFLAGS) $(AM_CFLAGS) $(CFLAGS) -MT libsubblock_la-subblock_decoder_helper.lo -MD -MP -MF $(DEPDIR)/libsubblock_la-subblock_decoder_helper.Tpo -c -o libsubblock_la-subblock_decoder_helper.lo `test -f 'subblock_decoder_helper.c' || echo '$(srcdir)/'`subblock_decoder_helper.c
-@am__fastdepCC_TRUE@ mv -f $(DEPDIR)/libsubblock_la-subblock_decoder_helper.Tpo $(DEPDIR)/libsubblock_la-subblock_decoder_helper.Plo
-@AMDEP_TRUE@@am__fastdepCC_FALSE@ source='subblock_decoder_helper.c' object='libsubblock_la-subblock_decoder_helper.lo' libtool=yes @AMDEPBACKSLASH@
-@AMDEP_TRUE@@am__fastdepCC_FALSE@ DEPDIR=$(DEPDIR) $(CCDEPMODE) $(depcomp) @AMDEPBACKSLASH@
-@am__fastdepCC_FALSE@ $(LIBTOOL) --tag=CC $(AM_LIBTOOLFLAGS) $(LIBTOOLFLAGS) --mode=compile $(CC) $(DEFS) $(DEFAULT_INCLUDES) $(INCLUDES) $(libsubblock_la_CPPFLAGS) $(CPPFLAGS) $(AM_CFLAGS) $(CFLAGS) -c -o libsubblock_la-subblock_decoder_helper.lo `test -f 'subblock_decoder_helper.c' || echo '$(srcdir)/'`subblock_decoder_helper.c
-
-mostlyclean-libtool:
- -rm -f *.lo
-
-clean-libtool:
- -rm -rf .libs _libs
-
-ID: $(HEADERS) $(SOURCES) $(LISP) $(TAGS_FILES)
- list='$(SOURCES) $(HEADERS) $(LISP) $(TAGS_FILES)'; \
- unique=`for i in $$list; do \
- if test -f "$$i"; then echo $$i; else echo $(srcdir)/$$i; fi; \
- done | \
- $(AWK) '{ files[$$0] = 1; nonempty = 1; } \
- END { if (nonempty) { for (i in files) print i; }; }'`; \
- mkid -fID $$unique
-tags: TAGS
-
-TAGS: $(HEADERS) $(SOURCES) $(TAGS_DEPENDENCIES) \
- $(TAGS_FILES) $(LISP)
- tags=; \
- here=`pwd`; \
- list='$(SOURCES) $(HEADERS) $(LISP) $(TAGS_FILES)'; \
- unique=`for i in $$list; do \
- if test -f "$$i"; then echo $$i; else echo $(srcdir)/$$i; fi; \
- done | \
- $(AWK) '{ files[$$0] = 1; nonempty = 1; } \
- END { if (nonempty) { for (i in files) print i; }; }'`; \
- if test -z "$(ETAGS_ARGS)$$tags$$unique"; then :; else \
- test -n "$$unique" || unique=$$empty_fix; \
- $(ETAGS) $(ETAGSFLAGS) $(AM_ETAGSFLAGS) $(ETAGS_ARGS) \
- $$tags $$unique; \
- fi
-ctags: CTAGS
-CTAGS: $(HEADERS) $(SOURCES) $(TAGS_DEPENDENCIES) \
- $(TAGS_FILES) $(LISP)
- tags=; \
- list='$(SOURCES) $(HEADERS) $(LISP) $(TAGS_FILES)'; \
- unique=`for i in $$list; do \
- if test -f "$$i"; then echo $$i; else echo $(srcdir)/$$i; fi; \
- done | \
- $(AWK) '{ files[$$0] = 1; nonempty = 1; } \
- END { if (nonempty) { for (i in files) print i; }; }'`; \
- test -z "$(CTAGS_ARGS)$$tags$$unique" \
- || $(CTAGS) $(CTAGSFLAGS) $(AM_CTAGSFLAGS) $(CTAGS_ARGS) \
- $$tags $$unique
-
-GTAGS:
- here=`$(am__cd) $(top_builddir) && pwd` \
- && cd $(top_srcdir) \
- && gtags -i $(GTAGS_ARGS) $$here
-
-distclean-tags:
- -rm -f TAGS ID GTAGS GRTAGS GSYMS GPATH tags
-
-distdir: $(DISTFILES)
- @srcdirstrip=`echo "$(srcdir)" | sed 's/[].[^$$\\*]/\\\\&/g'`; \
- topsrcdirstrip=`echo "$(top_srcdir)" | sed 's/[].[^$$\\*]/\\\\&/g'`; \
- list='$(DISTFILES)'; \
- dist_files=`for file in $$list; do echo $$file; done | \
- sed -e "s|^$$srcdirstrip/||;t" \
- -e "s|^$$topsrcdirstrip/|$(top_builddir)/|;t"`; \
- case $$dist_files in \
- */*) $(MKDIR_P) `echo "$$dist_files" | \
- sed '/\//!d;s|^|$(distdir)/|;s,/[^/]*$$,,' | \
- sort -u` ;; \
- esac; \
- for file in $$dist_files; do \
- if test -f $$file || test -d $$file; then d=.; else d=$(srcdir); fi; \
- if test -d $$d/$$file; then \
- dir=`echo "/$$file" | sed -e 's,/[^/]*$$,,'`; \
- if test -d $(srcdir)/$$file && test $$d != $(srcdir); then \
- cp -pR $(srcdir)/$$file $(distdir)$$dir || exit 1; \
- fi; \
- cp -pR $$d/$$file $(distdir)$$dir || exit 1; \
- else \
- test -f $(distdir)/$$file \
- || cp -p $$d/$$file $(distdir)/$$file \
- || exit 1; \
- fi; \
- done
-check-am: all-am
-check: check-am
-all-am: Makefile $(LTLIBRARIES)
-installdirs:
-install: install-am
-install-exec: install-exec-am
-install-data: install-data-am
-uninstall: uninstall-am
-
-install-am: all-am
- @$(MAKE) $(AM_MAKEFLAGS) install-exec-am install-data-am
-
-installcheck: installcheck-am
-install-strip:
- $(MAKE) $(AM_MAKEFLAGS) INSTALL_PROGRAM="$(INSTALL_STRIP_PROGRAM)" \
- install_sh_PROGRAM="$(INSTALL_STRIP_PROGRAM)" INSTALL_STRIP_FLAG=-s \
- `test -z '$(STRIP)' || \
- echo "INSTALL_PROGRAM_ENV=STRIPPROG='$(STRIP)'"` install
-mostlyclean-generic:
-
-clean-generic:
-
-distclean-generic:
- -test -z "$(CONFIG_CLEAN_FILES)" || rm -f $(CONFIG_CLEAN_FILES)
-
-maintainer-clean-generic:
- @echo "This command is intended for maintainers to use"
- @echo "it deletes files that may require special tools to rebuild."
-clean: clean-am
-
-clean-am: clean-generic clean-libtool clean-noinstLTLIBRARIES \
- mostlyclean-am
-
-distclean: distclean-am
- -rm -rf ./$(DEPDIR)
- -rm -f Makefile
-distclean-am: clean-am distclean-compile distclean-generic \
- distclean-tags
-
-dvi: dvi-am
-
-dvi-am:
-
-html: html-am
-
-info: info-am
-
-info-am:
-
-install-data-am:
-
-install-dvi: install-dvi-am
-
-install-exec-am:
-
-install-html: install-html-am
-
-install-info: install-info-am
-
-install-man:
-
-install-pdf: install-pdf-am
-
-install-ps: install-ps-am
-
-installcheck-am:
-
-maintainer-clean: maintainer-clean-am
- -rm -rf ./$(DEPDIR)
- -rm -f Makefile
-maintainer-clean-am: distclean-am maintainer-clean-generic
-
-mostlyclean: mostlyclean-am
-
-mostlyclean-am: mostlyclean-compile mostlyclean-generic \
- mostlyclean-libtool
-
-pdf: pdf-am
-
-pdf-am:
-
-ps: ps-am
-
-ps-am:
-
-uninstall-am:
-
-.MAKE: install-am install-strip
-
-.PHONY: CTAGS GTAGS all all-am check check-am clean clean-generic \
- clean-libtool clean-noinstLTLIBRARIES ctags distclean \
- distclean-compile distclean-generic distclean-libtool \
- distclean-tags distdir dvi dvi-am html html-am info info-am \
- install install-am install-data install-data-am install-dvi \
- install-dvi-am install-exec install-exec-am install-html \
- install-html-am install-info install-info-am install-man \
- install-pdf install-pdf-am install-ps install-ps-am \
- install-strip installcheck installcheck-am installdirs \
- maintainer-clean maintainer-clean-generic mostlyclean \
- mostlyclean-compile mostlyclean-generic mostlyclean-libtool \
- pdf pdf-am ps ps-am tags uninstall uninstall-am
-
-# Tell versions [3.59,3.63) of GNU make to not export all variables.
-# Otherwise a system limit (for SysV at least) may be exceeded.
-.NOEXPORT:
diff --git a/Build/source/utils/xz-4.999.8beta/src/liblzma/subblock/subblock_decoder.h b/Build/source/utils/xz-4.999.8beta/src/liblzma/subblock/subblock_decoder.h
deleted file mode 100644
index 724ef357d0b..00000000000
--- a/Build/source/utils/xz-4.999.8beta/src/liblzma/subblock/subblock_decoder.h
+++ /dev/null
@@ -1,29 +0,0 @@
-///////////////////////////////////////////////////////////////////////////////
-//
-/// \file subblock_decoder.h
-/// \brief Decoder of the Subblock filter
-//
-// Copyright (C) 2007 Lasse Collin
-//
-// This library is free software; you can redistribute it and/or
-// modify it under the terms of the GNU Lesser General Public
-// License as published by the Free Software Foundation; either
-// version 2.1 of the License, or (at your option) any later version.
-//
-// This library is distributed in the hope that it will be useful,
-// but WITHOUT ANY WARRANTY; without even the implied warranty of
-// MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the GNU
-// Lesser General Public License for more details.
-//
-///////////////////////////////////////////////////////////////////////////////
-
-#ifndef LZMA_SUBBLOCK_DECODER_H
-#define LZMA_SUBBLOCK_DECODER_H
-
-#include "common.h"
-
-
-extern lzma_ret lzma_subblock_decoder_init(lzma_next_coder *next,
- lzma_allocator *allocator, const lzma_filter_info *filters);
-
-#endif
diff --git a/Build/source/utils/xz-4.999.8beta/src/liblzma/subblock/subblock_encoder.h b/Build/source/utils/xz-4.999.8beta/src/liblzma/subblock/subblock_encoder.h
deleted file mode 100644
index 3ef9e2e4284..00000000000
--- a/Build/source/utils/xz-4.999.8beta/src/liblzma/subblock/subblock_encoder.h
+++ /dev/null
@@ -1,28 +0,0 @@
-///////////////////////////////////////////////////////////////////////////////
-//
-/// \file subblock_encoder.h
-/// \brief Encoder of the Subblock filter
-//
-// Copyright (C) 2007 Lasse Collin
-//
-// This library is free software; you can redistribute it and/or
-// modify it under the terms of the GNU Lesser General Public
-// License as published by the Free Software Foundation; either
-// version 2.1 of the License, or (at your option) any later version.
-//
-// This library is distributed in the hope that it will be useful,
-// but WITHOUT ANY WARRANTY; without even the implied warranty of
-// MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the GNU
-// Lesser General Public License for more details.
-//
-///////////////////////////////////////////////////////////////////////////////
-
-#ifndef LZMA_SUBBLOCK_ENCODER_H
-#define LZMA_SUBBLOCK_ENCODER_H
-
-#include "common.h"
-
-extern lzma_ret lzma_subblock_encoder_init(lzma_next_coder *next,
- lzma_allocator *allocator, const lzma_filter_info *filters);
-
-#endif
diff --git a/Build/source/utils/xz-4.999.8beta/src/scripts/Makefile.am b/Build/source/utils/xz-4.999.8beta/src/scripts/Makefile.am
deleted file mode 100644
index be696f3d760..00000000000
--- a/Build/source/utils/xz-4.999.8beta/src/scripts/Makefile.am
+++ /dev/null
@@ -1,24 +0,0 @@
-dist_bin_SCRIPTS = lzdiff lzgrep lzmore
-dist_man_MANS = lzdiff.1 lzgrep.1 lzmore.1
-
-install-exec-hook:
- cd $(DESTDIR)$(bindir) && \
- rm -f lzcmp lzegrep lzfgrep lzless && \
- $(LN_S) lzdiff lzcmp && \
- $(LN_S) lzgrep lzegrep && \
- $(LN_S) lzgrep lzfgrep && \
- $(LN_S) lzmore lzless
-
-install-data-hook:
- cd $(DESTDIR)$(mandir)/man1 && \
- rm -f lzcmp.1 lzegrep.1 lzfgrep.1 lzless.1 && \
- $(LN_S) lzdiff.1 lzcmp.1 && \
- $(LN_S) lzgrep.1 lzegrep.1 && \
- $(LN_S) lzgrep.1 lzfgrep.1 && \
- $(LN_S) lzmore.1 lzless.1
-
-uninstall-hook:
- cd $(DESTDIR)$(bindir) && \
- rm -f lzcmp lzegrep lzfgrep lzless
- cd $(DESTDIR)$(mandir)/man1 && \
- rm -f lzcmp.1 lzegrep.1 lzfgrep.1 lzless.1
diff --git a/Build/source/utils/xz-4.999.8beta/src/scripts/Makefile.in b/Build/source/utils/xz-4.999.8beta/src/scripts/Makefile.in
deleted file mode 100644
index d576a821fb0..00000000000
--- a/Build/source/utils/xz-4.999.8beta/src/scripts/Makefile.in
+++ /dev/null
@@ -1,464 +0,0 @@
-# Makefile.in generated by automake 1.10.2 from Makefile.am.
-# @configure_input@
-
-# Copyright (C) 1994, 1995, 1996, 1997, 1998, 1999, 2000, 2001, 2002,
-# 2003, 2004, 2005, 2006, 2007, 2008 Free Software Foundation, Inc.
-# This Makefile.in is free software; the Free Software Foundation
-# gives unlimited permission to copy and/or distribute it,
-# with or without modifications, as long as this notice is preserved.
-
-# This program is distributed in the hope that it will be useful,
-# but WITHOUT ANY WARRANTY, to the extent permitted by law; without
-# even the implied warranty of MERCHANTABILITY or FITNESS FOR A
-# PARTICULAR PURPOSE.
-
-@SET_MAKE@
-
-VPATH = @srcdir@
-pkgdatadir = $(datadir)/@PACKAGE@
-pkglibdir = $(libdir)/@PACKAGE@
-pkgincludedir = $(includedir)/@PACKAGE@
-am__cd = CDPATH="$${ZSH_VERSION+.}$(PATH_SEPARATOR)" && cd
-install_sh_DATA = $(install_sh) -c -m 644
-install_sh_PROGRAM = $(install_sh) -c
-install_sh_SCRIPT = $(install_sh) -c
-INSTALL_HEADER = $(INSTALL_DATA)
-transform = $(program_transform_name)
-NORMAL_INSTALL = :
-PRE_INSTALL = :
-POST_INSTALL = :
-NORMAL_UNINSTALL = :
-PRE_UNINSTALL = :
-POST_UNINSTALL = :
-build_triplet = @build@
-host_triplet = @host@
-subdir = src/scripts
-DIST_COMMON = $(dist_bin_SCRIPTS) $(dist_man_MANS) \
- $(srcdir)/Makefile.am $(srcdir)/Makefile.in
-ACLOCAL_M4 = $(top_srcdir)/aclocal.m4
-am__aclocal_m4_deps = $(top_srcdir)/m4/acx_pthread.m4 \
- $(top_srcdir)/m4/getopt.m4 $(top_srcdir)/m4/gettext.m4 \
- $(top_srcdir)/m4/iconv.m4 $(top_srcdir)/m4/lib-ld.m4 \
- $(top_srcdir)/m4/lib-link.m4 $(top_srcdir)/m4/lib-prefix.m4 \
- $(top_srcdir)/m4/nls.m4 $(top_srcdir)/m4/po.m4 \
- $(top_srcdir)/m4/progtest.m4 $(top_srcdir)/configure.ac
-am__configure_deps = $(am__aclocal_m4_deps) $(CONFIGURE_DEPENDENCIES) \
- $(ACLOCAL_M4)
-mkinstalldirs = $(install_sh) -d
-CONFIG_HEADER = $(top_builddir)/config.h
-CONFIG_CLEAN_FILES =
-am__installdirs = "$(DESTDIR)$(bindir)" "$(DESTDIR)$(man1dir)"
-dist_binSCRIPT_INSTALL = $(INSTALL_SCRIPT)
-SCRIPTS = $(dist_bin_SCRIPTS)
-SOURCES =
-DIST_SOURCES =
-man1dir = $(mandir)/man1
-NROFF = nroff
-MANS = $(dist_man_MANS)
-DISTFILES = $(DIST_COMMON) $(DIST_SOURCES) $(TEXINFOS) $(EXTRA_DIST)
-ACLOCAL = @ACLOCAL@
-AMTAR = @AMTAR@
-AR = @AR@
-AUTOCONF = @AUTOCONF@
-AUTOHEADER = @AUTOHEADER@
-AUTOMAKE = @AUTOMAKE@
-AWK = @AWK@
-CC = @CC@
-CCAS = @CCAS@
-CCASDEPMODE = @CCASDEPMODE@
-CCASFLAGS = @CCASFLAGS@
-CCDEPMODE = @CCDEPMODE@
-CFLAGS = @CFLAGS@
-CFLAG_VISIBILITY = @CFLAG_VISIBILITY@
-CPP = @CPP@
-CPPFLAGS = @CPPFLAGS@
-CXX = @CXX@
-CXXCPP = @CXXCPP@
-CXXDEPMODE = @CXXDEPMODE@
-CXXFLAGS = @CXXFLAGS@
-CYGPATH_W = @CYGPATH_W@
-DEFS = @DEFS@
-DEPDIR = @DEPDIR@
-DSYMUTIL = @DSYMUTIL@
-ECHO = @ECHO@
-ECHO_C = @ECHO_C@
-ECHO_N = @ECHO_N@
-ECHO_T = @ECHO_T@
-EGREP = @EGREP@
-EXEEXT = @EXEEXT@
-F77 = @F77@
-FFLAGS = @FFLAGS@
-GETOPT_H = @GETOPT_H@
-GMSGFMT = @GMSGFMT@
-GMSGFMT_015 = @GMSGFMT_015@
-GREP = @GREP@
-HAVE_VISIBILITY = @HAVE_VISIBILITY@
-INSTALL = @INSTALL@
-INSTALL_DATA = @INSTALL_DATA@
-INSTALL_PROGRAM = @INSTALL_PROGRAM@
-INSTALL_SCRIPT = @INSTALL_SCRIPT@
-INSTALL_STRIP_PROGRAM = @INSTALL_STRIP_PROGRAM@
-INTLLIBS = @INTLLIBS@
-INTL_MACOSX_LIBS = @INTL_MACOSX_LIBS@
-LDFLAGS = @LDFLAGS@
-LIBICONV = @LIBICONV@
-LIBINTL = @LIBINTL@
-LIBOBJS = @LIBOBJS@
-LIBS = @LIBS@
-LIBTOOL = @LIBTOOL@
-LN_S = @LN_S@
-LTLIBICONV = @LTLIBICONV@
-LTLIBINTL = @LTLIBINTL@
-LTLIBOBJS = @LTLIBOBJS@
-MAKEINFO = @MAKEINFO@
-MKDIR_P = @MKDIR_P@
-MSGFMT = @MSGFMT@
-MSGFMT_015 = @MSGFMT_015@
-MSGMERGE = @MSGMERGE@
-NMEDIT = @NMEDIT@
-OBJEXT = @OBJEXT@
-PACKAGE = @PACKAGE@
-PACKAGE_BUGREPORT = @PACKAGE_BUGREPORT@
-PACKAGE_NAME = @PACKAGE_NAME@
-PACKAGE_STRING = @PACKAGE_STRING@
-PACKAGE_TARNAME = @PACKAGE_TARNAME@
-PACKAGE_VERSION = @PACKAGE_VERSION@
-PATH_SEPARATOR = @PATH_SEPARATOR@
-POSUB = @POSUB@
-PTHREAD_CC = @PTHREAD_CC@
-PTHREAD_CFLAGS = @PTHREAD_CFLAGS@
-PTHREAD_LIBS = @PTHREAD_LIBS@
-RANLIB = @RANLIB@
-SED = @SED@
-SET_MAKE = @SET_MAKE@
-SHELL = @SHELL@
-STRIP = @STRIP@
-USE_NLS = @USE_NLS@
-VERSION = @VERSION@
-XGETTEXT = @XGETTEXT@
-XGETTEXT_015 = @XGETTEXT_015@
-abs_builddir = @abs_builddir@
-abs_srcdir = @abs_srcdir@
-abs_top_builddir = @abs_top_builddir@
-abs_top_srcdir = @abs_top_srcdir@
-ac_ct_CC = @ac_ct_CC@
-ac_ct_CXX = @ac_ct_CXX@
-ac_ct_F77 = @ac_ct_F77@
-acx_pthread_config = @acx_pthread_config@
-am__include = @am__include@
-am__leading_dot = @am__leading_dot@
-am__quote = @am__quote@
-am__tar = @am__tar@
-am__untar = @am__untar@
-bindir = @bindir@
-build = @build@
-build_alias = @build_alias@
-build_cpu = @build_cpu@
-build_os = @build_os@
-build_vendor = @build_vendor@
-builddir = @builddir@
-datadir = @datadir@
-datarootdir = @datarootdir@
-docdir = @docdir@
-dvidir = @dvidir@
-exec_prefix = @exec_prefix@
-host = @host@
-host_alias = @host_alias@
-host_cpu = @host_cpu@
-host_os = @host_os@
-host_vendor = @host_vendor@
-htmldir = @htmldir@
-includedir = @includedir@
-infodir = @infodir@
-install_sh = @install_sh@
-libdir = @libdir@
-libexecdir = @libexecdir@
-localedir = @localedir@
-localstatedir = @localstatedir@
-mandir = @mandir@
-mkdir_p = @mkdir_p@
-oldincludedir = @oldincludedir@
-pdfdir = @pdfdir@
-prefix = @prefix@
-program_transform_name = @program_transform_name@
-psdir = @psdir@
-sbindir = @sbindir@
-sharedstatedir = @sharedstatedir@
-srcdir = @srcdir@
-sysconfdir = @sysconfdir@
-target_alias = @target_alias@
-top_build_prefix = @top_build_prefix@
-top_builddir = @top_builddir@
-top_srcdir = @top_srcdir@
-dist_bin_SCRIPTS = lzdiff lzgrep lzmore
-dist_man_MANS = lzdiff.1 lzgrep.1 lzmore.1
-all: all-am
-
-.SUFFIXES:
-$(srcdir)/Makefile.in: $(srcdir)/Makefile.am $(am__configure_deps)
- @for dep in $?; do \
- case '$(am__configure_deps)' in \
- *$$dep*) \
- ( cd $(top_builddir) && $(MAKE) $(AM_MAKEFLAGS) am--refresh ) \
- && { if test -f $@; then exit 0; else break; fi; }; \
- exit 1;; \
- esac; \
- done; \
- echo ' cd $(top_srcdir) && $(AUTOMAKE) --foreign src/scripts/Makefile'; \
- cd $(top_srcdir) && \
- $(AUTOMAKE) --foreign src/scripts/Makefile
-.PRECIOUS: Makefile
-Makefile: $(srcdir)/Makefile.in $(top_builddir)/config.status
- @case '$?' in \
- *config.status*) \
- cd $(top_builddir) && $(MAKE) $(AM_MAKEFLAGS) am--refresh;; \
- *) \
- echo ' cd $(top_builddir) && $(SHELL) ./config.status $(subdir)/$@ $(am__depfiles_maybe)'; \
- cd $(top_builddir) && $(SHELL) ./config.status $(subdir)/$@ $(am__depfiles_maybe);; \
- esac;
-
-$(top_builddir)/config.status: $(top_srcdir)/configure $(CONFIG_STATUS_DEPENDENCIES)
- cd $(top_builddir) && $(MAKE) $(AM_MAKEFLAGS) am--refresh
-
-$(top_srcdir)/configure: $(am__configure_deps)
- cd $(top_builddir) && $(MAKE) $(AM_MAKEFLAGS) am--refresh
-$(ACLOCAL_M4): $(am__aclocal_m4_deps)
- cd $(top_builddir) && $(MAKE) $(AM_MAKEFLAGS) am--refresh
-install-dist_binSCRIPTS: $(dist_bin_SCRIPTS)
- @$(NORMAL_INSTALL)
- test -z "$(bindir)" || $(MKDIR_P) "$(DESTDIR)$(bindir)"
- @list='$(dist_bin_SCRIPTS)'; for p in $$list; do \
- if test -f "$$p"; then d=; else d="$(srcdir)/"; fi; \
- if test -f $$d$$p; then \
- f=`echo "$$p" | sed 's|^.*/||;$(transform)'`; \
- echo " $(dist_binSCRIPT_INSTALL) '$$d$$p' '$(DESTDIR)$(bindir)/$$f'"; \
- $(dist_binSCRIPT_INSTALL) "$$d$$p" "$(DESTDIR)$(bindir)/$$f"; \
- else :; fi; \
- done
-
-uninstall-dist_binSCRIPTS:
- @$(NORMAL_UNINSTALL)
- @list='$(dist_bin_SCRIPTS)'; for p in $$list; do \
- f=`echo "$$p" | sed 's|^.*/||;$(transform)'`; \
- echo " rm -f '$(DESTDIR)$(bindir)/$$f'"; \
- rm -f "$(DESTDIR)$(bindir)/$$f"; \
- done
-
-mostlyclean-libtool:
- -rm -f *.lo
-
-clean-libtool:
- -rm -rf .libs _libs
-install-man1: $(man1_MANS) $(man_MANS)
- @$(NORMAL_INSTALL)
- test -z "$(man1dir)" || $(MKDIR_P) "$(DESTDIR)$(man1dir)"
- @list='$(man1_MANS) $(dist_man1_MANS) $(nodist_man1_MANS)'; \
- l2='$(man_MANS) $(dist_man_MANS) $(nodist_man_MANS)'; \
- for i in $$l2; do \
- case "$$i" in \
- *.1*) list="$$list $$i" ;; \
- esac; \
- done; \
- for i in $$list; do \
- if test -f $$i; then file=$$i; \
- else file=$(srcdir)/$$i; fi; \
- ext=`echo $$i | sed -e 's/^.*\\.//'`; \
- case "$$ext" in \
- 1*) ;; \
- *) ext='1' ;; \
- esac; \
- inst=`echo $$i | sed -e 's/\\.[0-9a-z]*$$//'`; \
- inst=`echo $$inst | sed -e 's/^.*\///'`; \
- inst=`echo $$inst | sed '$(transform)'`.$$ext; \
- echo " $(INSTALL_DATA) '$$file' '$(DESTDIR)$(man1dir)/$$inst'"; \
- $(INSTALL_DATA) "$$file" "$(DESTDIR)$(man1dir)/$$inst"; \
- done
-uninstall-man1:
- @$(NORMAL_UNINSTALL)
- @list='$(man1_MANS) $(dist_man1_MANS) $(nodist_man1_MANS)'; \
- l2='$(man_MANS) $(dist_man_MANS) $(nodist_man_MANS)'; \
- for i in $$l2; do \
- case "$$i" in \
- *.1*) list="$$list $$i" ;; \
- esac; \
- done; \
- for i in $$list; do \
- ext=`echo $$i | sed -e 's/^.*\\.//'`; \
- case "$$ext" in \
- 1*) ;; \
- *) ext='1' ;; \
- esac; \
- inst=`echo $$i | sed -e 's/\\.[0-9a-z]*$$//'`; \
- inst=`echo $$inst | sed -e 's/^.*\///'`; \
- inst=`echo $$inst | sed '$(transform)'`.$$ext; \
- echo " rm -f '$(DESTDIR)$(man1dir)/$$inst'"; \
- rm -f "$(DESTDIR)$(man1dir)/$$inst"; \
- done
-tags: TAGS
-TAGS:
-
-ctags: CTAGS
-CTAGS:
-
-
-distdir: $(DISTFILES)
- @srcdirstrip=`echo "$(srcdir)" | sed 's/[].[^$$\\*]/\\\\&/g'`; \
- topsrcdirstrip=`echo "$(top_srcdir)" | sed 's/[].[^$$\\*]/\\\\&/g'`; \
- list='$(DISTFILES)'; \
- dist_files=`for file in $$list; do echo $$file; done | \
- sed -e "s|^$$srcdirstrip/||;t" \
- -e "s|^$$topsrcdirstrip/|$(top_builddir)/|;t"`; \
- case $$dist_files in \
- */*) $(MKDIR_P) `echo "$$dist_files" | \
- sed '/\//!d;s|^|$(distdir)/|;s,/[^/]*$$,,' | \
- sort -u` ;; \
- esac; \
- for file in $$dist_files; do \
- if test -f $$file || test -d $$file; then d=.; else d=$(srcdir); fi; \
- if test -d $$d/$$file; then \
- dir=`echo "/$$file" | sed -e 's,/[^/]*$$,,'`; \
- if test -d $(srcdir)/$$file && test $$d != $(srcdir); then \
- cp -pR $(srcdir)/$$file $(distdir)$$dir || exit 1; \
- fi; \
- cp -pR $$d/$$file $(distdir)$$dir || exit 1; \
- else \
- test -f $(distdir)/$$file \
- || cp -p $$d/$$file $(distdir)/$$file \
- || exit 1; \
- fi; \
- done
-check-am: all-am
-check: check-am
-all-am: Makefile $(SCRIPTS) $(MANS)
-installdirs:
- for dir in "$(DESTDIR)$(bindir)" "$(DESTDIR)$(man1dir)"; do \
- test -z "$$dir" || $(MKDIR_P) "$$dir"; \
- done
-install: install-am
-install-exec: install-exec-am
-install-data: install-data-am
-uninstall: uninstall-am
-
-install-am: all-am
- @$(MAKE) $(AM_MAKEFLAGS) install-exec-am install-data-am
-
-installcheck: installcheck-am
-install-strip:
- $(MAKE) $(AM_MAKEFLAGS) INSTALL_PROGRAM="$(INSTALL_STRIP_PROGRAM)" \
- install_sh_PROGRAM="$(INSTALL_STRIP_PROGRAM)" INSTALL_STRIP_FLAG=-s \
- `test -z '$(STRIP)' || \
- echo "INSTALL_PROGRAM_ENV=STRIPPROG='$(STRIP)'"` install
-mostlyclean-generic:
-
-clean-generic:
-
-distclean-generic:
- -test -z "$(CONFIG_CLEAN_FILES)" || rm -f $(CONFIG_CLEAN_FILES)
-
-maintainer-clean-generic:
- @echo "This command is intended for maintainers to use"
- @echo "it deletes files that may require special tools to rebuild."
-clean: clean-am
-
-clean-am: clean-generic clean-libtool mostlyclean-am
-
-distclean: distclean-am
- -rm -f Makefile
-distclean-am: clean-am distclean-generic
-
-dvi: dvi-am
-
-dvi-am:
-
-html: html-am
-
-info: info-am
-
-info-am:
-
-install-data-am: install-man
- @$(NORMAL_INSTALL)
- $(MAKE) $(AM_MAKEFLAGS) install-data-hook
-
-install-dvi: install-dvi-am
-
-install-exec-am: install-dist_binSCRIPTS
- @$(NORMAL_INSTALL)
- $(MAKE) $(AM_MAKEFLAGS) install-exec-hook
-
-install-html: install-html-am
-
-install-info: install-info-am
-
-install-man: install-man1
-
-install-pdf: install-pdf-am
-
-install-ps: install-ps-am
-
-installcheck-am:
-
-maintainer-clean: maintainer-clean-am
- -rm -f Makefile
-maintainer-clean-am: distclean-am maintainer-clean-generic
-
-mostlyclean: mostlyclean-am
-
-mostlyclean-am: mostlyclean-generic mostlyclean-libtool
-
-pdf: pdf-am
-
-pdf-am:
-
-ps: ps-am
-
-ps-am:
-
-uninstall-am: uninstall-dist_binSCRIPTS uninstall-man
- @$(NORMAL_INSTALL)
- $(MAKE) $(AM_MAKEFLAGS) uninstall-hook
-
-uninstall-man: uninstall-man1
-
-.MAKE: install-am install-data-am install-exec-am install-strip \
- uninstall-am
-
-.PHONY: all all-am check check-am clean clean-generic clean-libtool \
- distclean distclean-generic distclean-libtool distdir dvi \
- dvi-am html html-am info info-am install install-am \
- install-data install-data-am install-data-hook \
- install-dist_binSCRIPTS install-dvi install-dvi-am \
- install-exec install-exec-am install-exec-hook install-html \
- install-html-am install-info install-info-am install-man \
- install-man1 install-pdf install-pdf-am install-ps \
- install-ps-am install-strip installcheck installcheck-am \
- installdirs maintainer-clean maintainer-clean-generic \
- mostlyclean mostlyclean-generic mostlyclean-libtool pdf pdf-am \
- ps ps-am uninstall uninstall-am uninstall-dist_binSCRIPTS \
- uninstall-hook uninstall-man uninstall-man1
-
-
-install-exec-hook:
- cd $(DESTDIR)$(bindir) && \
- rm -f lzcmp lzegrep lzfgrep lzless && \
- $(LN_S) lzdiff lzcmp && \
- $(LN_S) lzgrep lzegrep && \
- $(LN_S) lzgrep lzfgrep && \
- $(LN_S) lzmore lzless
-
-install-data-hook:
- cd $(DESTDIR)$(mandir)/man1 && \
- rm -f lzcmp.1 lzegrep.1 lzfgrep.1 lzless.1 && \
- $(LN_S) lzdiff.1 lzcmp.1 && \
- $(LN_S) lzgrep.1 lzegrep.1 && \
- $(LN_S) lzgrep.1 lzfgrep.1 && \
- $(LN_S) lzmore.1 lzless.1
-
-uninstall-hook:
- cd $(DESTDIR)$(bindir) && \
- rm -f lzcmp lzegrep lzfgrep lzless
- cd $(DESTDIR)$(mandir)/man1 && \
- rm -f lzcmp.1 lzegrep.1 lzfgrep.1 lzless.1
-# Tell versions [3.59,3.63) of GNU make to not export all variables.
-# Otherwise a system limit (for SysV at least) may be exceeded.
-.NOEXPORT:
diff --git a/Build/source/utils/xz-4.999.8beta/src/scripts/lzdiff b/Build/source/utils/xz-4.999.8beta/src/scripts/lzdiff
deleted file mode 100755
index c867cbeac3e..00000000000
--- a/Build/source/utils/xz-4.999.8beta/src/scripts/lzdiff
+++ /dev/null
@@ -1,67 +0,0 @@
-#!/bin/sh
-# sh is buggy on RS/6000 AIX 3.2. Replace above line with #!/bin/ksh
-
-# lzcmp and lzdiff are used to invoke the cmp or the diff pro-
-# gram on compressed files. All options specified are passed
-# directly to cmp or diff. If only 1 file is specified, then
-# the files compared are file1 and an uncompressed file1.lzma.
-# If two files are specified, then they are uncompressed and
-# fed to cmp or diff. The exit status from cmp or diff is
-# preserved.
-
-prog=`echo $0 | sed 's|.*/||'`
-case "$prog" in
- *cmp) comp=${CMP-cmp} ;;
- *) comp=${DIFF-diff} ;;
-esac
-
-OPTIONS=
-FILES=
-for ARG
-do
- case "$ARG" in
- -*) OPTIONS="$OPTIONS $ARG";;
- *) if test -f "$ARG"; then
- FILES="$FILES $ARG"
- else
- echo "${prog}: $ARG not found or not a regular file"
- exit 2
- fi ;;
- esac
-done
-if test -z "$FILES"; then
- echo "Usage: $prog [${comp}_options] file [file]"
- exit 2
-fi
-set $FILES
-if test $# -eq 1; then
- FILE=`echo "$1" | sed 's/[-.][tlaz]*$//'`
- lzma -dc "$1" | $comp $OPTIONS - "$FILE"
-
-elif test $# -eq 2; then
- case "$1" in
- *[-.]lzma | *.t[la]z)
- case "$2" in
- *[-.]lzma | *.t[la]z)
- F=`echo "$2" | sed 's|.*/||;s|[-.][tlaz]*||'`
- TF=`/usr/bin/mktemp ${TMPDIR:-/tmp}/"$F".XXXXXXXXXX` || exit 1
- trap 'rm -f "$TF"; exit 2' EXIT HUP INT PIPE TERM
- lzma -dc "$2" > "$TF" || exit
- lzma -dc "$1" | $comp $OPTIONS - "$TF"
- STAT="$?"
- rm -f "$TF" || STAT=2
- trap EXIT HUP INT PIPE TERM
- exit $STAT;;
-
- *) lzma -dc "$1" | $comp $OPTIONS - "$2";;
- esac;;
- *) case "$2" in
- *[-.]lzma | *.t[la]z)
- lzma -dc "$2" | $comp $OPTIONS "$1" -;;
- *) $comp $OPTIONS "$1" "$2";;
- esac;;
- esac
-else
- echo "Usage: $prog [${comp}_options] file [file]"
- exit 2
-fi
diff --git a/Build/source/utils/xz-4.999.8beta/src/scripts/lzdiff.1 b/Build/source/utils/xz-4.999.8beta/src/scripts/lzdiff.1
deleted file mode 100644
index 17bb855a24c..00000000000
--- a/Build/source/utils/xz-4.999.8beta/src/scripts/lzdiff.1
+++ /dev/null
@@ -1,51 +0,0 @@
-.TH LZDIFF 1 "24 Jun 2005" "LZMA utils"
-.SH NAME
-lzcmp, lzdiff \- compare LZMA compressed files
-.SH SYNOPSIS
-.B lzcmp
-.RI [ cmp_options "] " file1 " [" file2 ]
-.br
-.B zdiff
-.RI [ diff_options "] " file1 " [" file2 ]
-.SH DESCRIPTION
-.B lzcmp
-and
-.B zdiff
-are used to invoke the
-.BR cmp (1)
-or the
-.BR diff (1)
-program on compressed files. All options specified are passed directly to
-.B cmp
-or
-.BR diff "."
-If only 1 file is specified, then the files compared are
-.I file1
-and an uncompressed
-.IB file1 ".gz\fR."
-If two files are specified, then they are uncompressed if necessary and fed to
-.B cmp
-or
-.BR diff "."
-The exit status from
-.B cmp
-or
-.B diff
-is preserved.
-.SH AUTHORS
-This manual page was ripped from
-.BR zdiff (1)
-shipped in gzip package.
-.SH "SEE ALSO"
-.BR cmp (1),
-.BR diff (1),
-.BR lzmore(1),
-.BR lzgrep(1),
-.BR lzma (1),
-.BR lzmash (1)
-.SH BUGS
-Messages from the
-.B cmp
-or
-.B diff
-programs refer to temporary filenames instead of those specified.
diff --git a/Build/source/utils/xz-4.999.8beta/src/scripts/lzgrep b/Build/source/utils/xz-4.999.8beta/src/scripts/lzgrep
deleted file mode 100755
index c872df4e509..00000000000
--- a/Build/source/utils/xz-4.999.8beta/src/scripts/lzgrep
+++ /dev/null
@@ -1,123 +0,0 @@
-#!/bin/sh
-
-# lzgrep -- a wrapper around a grep program that decompresses files as needed
-# Adapted to LZMA utils from gzip-1.3.3 + Red Hat's security patches
-# Adapted from a version sent by Charles Levert <charles@comm.polymtl.ca>
-# Copyright (C) 1998, 2001 Free Software Foundation
-# Copyright (C) 1993 Jean-loup Gailly
-
-# This program is free software; you can redistribute it and/or modify
-# it under the terms of the GNU General Public License as published by
-# the Free Software Foundation; either version 2, or (at your option)
-# any later version.
-
-# This program is distributed in the hope that it will be useful,
-# but WITHOUT ANY WARRANTY; without even the implied warranty of
-# MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
-# GNU General Public License for more details.
-
-# You should have received a copy of the GNU General Public License
-# along with this program; if not, write to the Free Software
-# Foundation, Inc., 59 Temple Place - Suite 330, Boston, MA
-# 02111-1307, USA.
-
-# Improve error handling, this is supported by bash but not all the other
-# shells so we hide the possible error:
-set -o pipefail > /dev/null 2> /dev/null
-
-prog=`echo "$0" | sed 's|.*/||'`
-case "$prog" in
- *egrep) grep=${EGREP-egrep} ;;
- *fgrep) grep=${FGREP-fgrep} ;;
- *) grep=${GREP-grep} ;;
-esac
-
-pat=""
-after_dash_dash=""
-files_with_matches=0
-files_without_matches=0
-no_filename=0
-with_filename=0
-
-while test $# -ne 0; do
- case "$after_dash_dash$1" in
- --d* | --rec*) echo >&2 "$0: $1: option not supported"; exit 1;;
- --files-with-*) files_with_matches=1;;
- --files-witho*) files_without_matches=1;;
- --no-f*) no_filename=1;;
- --wi*) with_filename=1;;
- --*) ;;
- -*)
- case "$1" in
- -*[dr]*) echo >&2 "$0: $1: option not supported"; exit 1;;
- esac
- case "$1" in
- -*H*) with_filename=1;;
- esac
- case "$1" in
- -*h*) no_filename=1;;
- esac
- case "$1" in
- -*L*) files_without_matches=1;;
- esac
- case "$1" in
- -*l*) files_with_matches=1;;
- esac;;
- esac
- case "$after_dash_dash$1" in
- -[ef]) opt="$opt $1"; shift; pat="$1"
- if test "$grep" = grep; then # grep is buggy with -e on SVR4
- grep=egrep
- fi;;
- -[ABCdm])opt="$opt $1 $2"; shift;;
- --) opt="$opt $1"; after_dash_dash=1;;
- -*) opt="$opt $1";;
- *) if test -z "$pat"; then
- pat="$1"
- else
- break;
- fi;;
- esac
- shift
-done
-
-if test -z "$pat"; then
- echo "grep through lzma files"
- echo "usage: $prog [grep_options] pattern [files]"
- exit 1
-fi
-
-if test $# -eq 0; then
- lzma -dc | $grep $opt "$pat"
- exit $?
-fi
-
-res=0
-trap break SIGPIPE
-for i do
- lzma -dc "$i" |
- if test $files_with_matches -eq 1; then
- $grep $opt "$pat" > /dev/null && printf "%s\n" "$i"
- elif test $files_without_matches -eq 1; then
- $grep $opt "$pat" > /dev/null || printf "%s\n" "$i"
- elif test $with_filename -eq 0 && { test $# -eq 1 || test $no_filename -eq 1; }; then
- $grep $opt "$pat"
- else
- i=${i//\\/\\\\}
- i=${i//|/\\|}
- i=${i//&/\\&}
- i=`printf "%s" "$i" | tr '\n' ' '`
- if test $with_filename -eq 1; then
- sed_script="s|^[^:]*:|${i}:|"
- else
- sed_script="s|^|${i}:|"
- fi
- $grep $opt "$pat" | sed "$sed_script"
- fi
- r=$?
- test $res -lt $r && res=$r
- # SIGPIPE + 128
- test "$r" -eq 141 && exit $res
-done
-trap - SIGPIPE
-exit $res
diff --git a/Build/source/utils/xz-4.999.8beta/src/scripts/lzgrep.1 b/Build/source/utils/xz-4.999.8beta/src/scripts/lzgrep.1
deleted file mode 100644
index 65e344dd744..00000000000
--- a/Build/source/utils/xz-4.999.8beta/src/scripts/lzgrep.1
+++ /dev/null
@@ -1,61 +0,0 @@
-.TH LZGREP 1 "24 Jun 2005" "LZMA utils"
-.SH NAME
-lzgrep \- search LZMA compressed files for a regular expression
-.SH SYNOPSIS
-.B lzgrep
-.RI [ grep_options ]
-.RB [ \-e ]
-.I pattern
-.IR filename ".\|.\|."
-.br
-.B lzegrep
-.RB ...
-.br
-.B lzfgrep
-.RB ...
-.SH DESCRIPTION
-.B lzgrep
-is used to invoke the
-.BR grep (1)
-on LZMA compressed files. All options specified are passed directly to
-.BR grep .
-If no file is specified, then the standard input is decompressed
-if necessary and fed to grep.
-Otherwise the given files are uncompressed if necessary and fed to
-.BR grep .
-.PP
-If
-.B lzgrep
-is invoked as
-.B lzegrep
-or
-.B lzfgrep
-then
-.B egrep
-or
-.B fgrep
-is used instead of
-.B grep.
-If the GREP environment variable is set,
-.B lzgrep
-uses it as the
-.B grep
-program to be invoked. For example:
-
- for sh: GREP=fgrep lzgrep string files
- for csh: (setenv GREP fgrep; lzgrep string files)
-.SH AUTHORS
-Original
-.BR zgrep (1)
-manual page by Charles Levert <charles@comm.polymtl.ca>.
-.PP
-Minor modifications for LZMA utils by Lasse Collin
-<lasse.collin@tukaani.org>.
-.SH "SEE ALSO"
-.BR grep (1),
-.BR egrep (1),
-.BR fgrep (1),
-.BR lzdiff (1),
-.BR lzmore (1),
-.BR lzma (1),
-.BR lzmash (1)
diff --git a/Build/source/utils/xz-4.999.8beta/src/scripts/lzmore b/Build/source/utils/xz-4.999.8beta/src/scripts/lzmore
deleted file mode 100755
index d694774d64a..00000000000
--- a/Build/source/utils/xz-4.999.8beta/src/scripts/lzmore
+++ /dev/null
@@ -1,74 +0,0 @@
-#!/bin/sh
-
-# Copyright (C) 2001 Free Software Foundation
-# Copyright (C) 1992, 1993 Jean-loup Gailly
-# Adapted to LZMA utils from gzip-1.3.3 + Red Hat's security patches
-
-# This program is free software; you can redistribute it and/or modify
-# it under the terms of the GNU General Public License as published by
-# the Free Software Foundation; either version 2, or (at your option)
-# any later version.
-
-# This program is distributed in the hope that it will be useful,
-# but WITHOUT ANY WARRANTY; without even the implied warranty of
-# MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
-# GNU General Public License for more details.
-
-# You should have received a copy of the GNU General Public License
-# along with this program; if not, write to the Free Software
-# Foundation, Inc., 59 Temple Place - Suite 330, Boston, MA
-# 02111-1307, USA.
-
-if test "`echo "$0" | sed 's|.*/||'`" = "lzless"; then
- PAGER=less
-fi
-
-if test "`echo -n a`" = "-n a"; then
- # looks like a SysV system:
- n1=''; n2='\c'
-else
- n1='-n'; n2=''
-fi
-oldtty=`stty -g 2>/dev/null`
-if stty -cbreak 2>/dev/null; then
- cb='cbreak'; ncb='-cbreak'
-else
- # 'stty min 1' resets eof to ^a on both SunOS and SysV!
- cb='min 1 -icanon'; ncb='icanon eof ^d'
-fi
-if test $? -eq 0 -a -n "$oldtty"; then
- trap 'stty $oldtty 2>/dev/null; exit' 0 2 3 5 10 13 15
-else
- trap 'stty $ncb echo 2>/dev/null; exit' 0 2 3 5 10 13 15
-fi
-
-if test $# = 0; then
- if test -t 0; then
- echo usage: zmore files...
- else
- lzma -dc | eval ${PAGER-more}
- fi
-else
- FIRST=1
- for FILE
- do
- < "$FILE" || continue
- if test $FIRST -eq 0; then
- echo $n1 "--More--(Next file: $FILE)$n2"
- stty $cb -echo 2>/dev/null
- ANS=`dd bs=1 count=1 2>/dev/null`
- stty $ncb echo 2>/dev/null
- echo " "
- if test "$ANS" = 'e' -o "$ANS" = 'q'; then
- exit
- fi
- fi
- if test "$ANS" != 's'; then
- echo "------> $FILE <------"
- lzma -dc "$FILE" | eval ${PAGER-more}
- fi
- if test -t; then
- FIRST=0
- fi
- done
-fi
diff --git a/Build/source/utils/xz-4.999.8beta/src/scripts/lzmore.1 b/Build/source/utils/xz-4.999.8beta/src/scripts/lzmore.1
deleted file mode 100644
index d92f95d3923..00000000000
--- a/Build/source/utils/xz-4.999.8beta/src/scripts/lzmore.1
+++ /dev/null
@@ -1,55 +0,0 @@
-.TH LZMORE 1 "30 Jun 2005" "LZMA utils"
-.SH NAME
-lzmore, lzless \- view LZMA compressed (text) files
-.SH SYNOPSIS
-.B lzmore
-.RI [ "filename ..." ]
-.br
-.B lzless
-.RI [ "filename ..." ]
-.SH DESCRIPTION
-.B lzmore
-is a filter which allows examination of LZMA compressed text files
-one screenful at a time on a soft-copy terminal.
-.PP
-To use a pager other than the default
-.B more,
-set environment variable
-.B PAGER
-to the name of the desired program, such as
-.BR less .
-If
-.B lzmore
-is called as
-.B lzless
-then
-.B less
-is used as the
-.BR PAGER .
-.TP
-.BR e " or " q
-When the prompt --More--(Next file:
-.IR file )
-is printed, this command causes lzmore to exit.
-.TP
-.B s
-When the prompt --More--(Next file:
-.IR file )
-is printed, this command causes zmore to skip the next file and continue.
-.PP
-For list of keyboard commands supported while actually viewing the
-content of a file, refer to manual of the pager you use, usually
-.BR more (1)
-or
-.BR less (1).
-.SH AUTHORS
-This manual page was ripped from
-.BR zmore (1)
-shipped in gzip package.
-.SH "SEE ALSO"
-.BR more (1),
-.BR zmore (1),
-.BR lzdiff (1),
-.BR lzgrep (1),
-.BR lzma (1),
-.BR lzmash (1)
diff --git a/Build/source/utils/xz-4.999.8beta/src/xz/Makefile.am b/Build/source/utils/xz-4.999.8beta/src/xz/Makefile.am
deleted file mode 100644
index 5deed299601..00000000000
--- a/Build/source/utils/xz-4.999.8beta/src/xz/Makefile.am
+++ /dev/null
@@ -1,73 +0,0 @@
-##
-## Copyright (C) 2007 Lasse Collin
-##
-## This program is free software; you can redistribute it and/or
-## modify it under the terms of the GNU Lesser General Public
-## License as published by the Free Software Foundation; either
-## version 2.1 of the License, or (at your option) any later version.
-##
-## This program is distributed in the hope that it will be useful,
-## but WITHOUT ANY WARRANTY; without even the implied warranty of
-## MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the GNU
-## Lesser General Public License for more details.
-##
-
-bin_PROGRAMS = xz
-
-xz_SOURCES = \
- args.c \
- args.h \
- hardware.c \
- hardware.h \
- io.c \
- io.h \
- main.c \
- main.h \
- message.c \
- message.h \
- options.c \
- options.h \
- private.h \
- process.c \
- process.h \
- signals.c \
- signals.h \
- suffix.c \
- suffix.h \
- util.c \
- util.h
-
-xz_CPPFLAGS = \
- -DLOCALEDIR=\"$(localedir)\" \
- -I@top_srcdir@/src/common \
- -I@top_srcdir@/src/liblzma/api \
- -I@top_builddir@/lib \
- -I@top_srcdir@/lib
-
-## Always link the command line tool statically against liblzma. It is
-## faster on x86, because no need for PIC. We also have one dependency less,
-## which allows users to more freely copy the xz binary to other boxes.
-xz_LDFLAGS = -static
-xz_LDADD = \
- @top_builddir@/src/liblzma/liblzma.la \
- @LTLIBINTL@
-
-if COND_GNULIB
-xz_LDADD += @top_builddir@/lib/libgnu.a
-endif
-
-
-## Create symlinks for unxz and xzcat for convenicen. Create symlinks also
-## for lzma, unlzma, and lzcat for compatibility with LZMA Utils 4.32.x.
-install-exec-hook:
- cd $(DESTDIR)$(bindir) && \
- rm -f unxz xzcat lzma unlzma lzcat && \
- $(LN_S) xz unxz && \
- $(LN_S) xz xzcat && \
- $(LN_S) xz lzma && \
- $(LN_S) xz unlzma && \
- $(LN_S) xz lzcat
-
-uninstall-hook:
- cd $(DESTDIR)$(bindir) && \
- rm -f unxz xzcat lzma unlzma lzcat
diff --git a/Build/source/utils/xz-4.999.8beta/src/xz/hardware.c b/Build/source/utils/xz-4.999.8beta/src/xz/hardware.c
deleted file mode 100644
index 63bf09376d0..00000000000
--- a/Build/source/utils/xz-4.999.8beta/src/xz/hardware.c
+++ /dev/null
@@ -1,122 +0,0 @@
-///////////////////////////////////////////////////////////////////////////////
-//
-/// \file hardware.c
-/// \brief Detection of available hardware resources
-//
-// Copyright (C) 2007 Lasse Collin
-//
-// This program is free software; you can redistribute it and/or
-// modify it under the terms of the GNU Lesser General Public
-// License as published by the Free Software Foundation; either
-// version 2.1 of the License, or (at your option) any later version.
-//
-// This program is distributed in the hope that it will be useful,
-// but WITHOUT ANY WARRANTY; without even the implied warranty of
-// MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the GNU
-// Lesser General Public License for more details.
-//
-///////////////////////////////////////////////////////////////////////////////
-
-#include "private.h"
-#include "physmem.h"
-
-
-/// Maximum number of free *coder* threads. This can be set with
-/// the --threads=NUM command line option.
-size_t opt_threads = 1;
-
-
-/// Memory usage limit for encoding
-static uint64_t memlimit_encoder;
-
-/// Memory usage limit for decoding
-static uint64_t memlimit_decoder;
-
-/// Memory usage limit given on the command line or environment variable.
-/// Zero indicates the default (memlimit_encoder or memlimit_decoder).
-static uint64_t memlimit_custom = 0;
-
-
-/// Get the number of CPU cores, and set opt_threads to default to that value.
-/// User can then override this with --threads command line option.
-static void
-hardware_cores(void)
-{
-#if defined(HAVE_NUM_PROCESSORS_SYSCONF)
- const long cpus = sysconf(_SC_NPROCESSORS_ONLN);
- if (cpus > 0)
- opt_threads = (size_t)(cpus);
-
-#elif defined(HAVE_NUM_PROCESSORS_SYSCTL)
- int name[2] = { CTL_HW, HW_NCPU };
- int cpus;
- size_t cpus_size = sizeof(cpus);
- if (!sysctl(name, &cpus, &cpus_size, NULL, NULL)
- && cpus_size == sizeof(cpus) && cpus > 0)
- opt_threads = (size_t)(cpus);
-#endif
-
- // Limit opt_threads so that maximum number of threads doesn't exceed.
-
-#if defined(_SC_THREAD_THREADS_MAX)
- const long threads_max = sysconf(_SC_THREAD_THREADS_MAX);
- if (threads_max > 0 && (size_t)(threads_max) < opt_threads)
- opt_threads = (size_t)(threads_max);
-
-#elif defined(PTHREAD_THREADS_MAX)
- if (opt_threads > PTHREAD_THREADS_MAX)
- opt_threads = PTHREAD_THREADS_MAX;
-#endif
-
- return;
-}
-
-
-static void
-hardware_memlimit_init(void)
-{
- uint64_t mem = physmem();
-
- // If we cannot determine the amount of RAM, assume 32 MiB. Maybe
- // even that is too much on some systems. But on most systems it's
- // far too little, and can be annoying.
- if (mem == 0)
- mem = UINT64_C(16) * 1024 * 1024;
-
- // Use at maximum of 90 % of RAM when encoding and 33 % when decoding.
- memlimit_encoder = mem - mem / 10;
- memlimit_decoder = mem / 3;
-
- return;
-}
-
-
-extern void
-hardware_memlimit_set(uint64_t memlimit)
-{
- memlimit_custom = memlimit;
- return;
-}
-
-
-extern uint64_t
-hardware_memlimit_encoder(void)
-{
- return memlimit_custom != 0 ? memlimit_custom : memlimit_encoder;
-}
-
-
-extern uint64_t
-hardware_memlimit_decoder(void)
-{
- return memlimit_custom != 0 ? memlimit_custom : memlimit_decoder;
-}
-
-
-extern void
-hardware_init(void)
-{
- hardware_memlimit_init();
- hardware_cores();
- return;
-}
diff --git a/Build/source/utils/xz-4.999.8beta/src/xz/hardware.h b/Build/source/utils/xz-4.999.8beta/src/xz/hardware.h
deleted file mode 100644
index a6d91d78434..00000000000
--- a/Build/source/utils/xz-4.999.8beta/src/xz/hardware.h
+++ /dev/null
@@ -1,37 +0,0 @@
-///////////////////////////////////////////////////////////////////////////////
-//
-/// \file hardware.h
-/// \brief Detection of available hardware resources
-//
-// Copyright (C) 2007 Lasse Collin
-//
-// This program is free software; you can redistribute it and/or
-// modify it under the terms of the GNU Lesser General Public
-// License as published by the Free Software Foundation; either
-// version 2.1 of the License, or (at your option) any later version.
-//
-// This program is distributed in the hope that it will be useful,
-// but WITHOUT ANY WARRANTY; without even the implied warranty of
-// MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the GNU
-// Lesser General Public License for more details.
-//
-///////////////////////////////////////////////////////////////////////////////
-
-extern size_t opt_threads;
-
-
-/// Initialize some hardware-specific variables, which are needed by other
-/// hardware_* functions.
-extern void hardware_init(void);
-
-
-/// Set custom memory usage limit. This is used for both encoding and
-/// decoding. Zero indicates resetting the limit back to defaults.
-extern void hardware_memlimit_set(uint64_t memlimit);
-
-/// Get the memory usage limit for encoding. By default this is 90 % of RAM.
-extern uint64_t hardware_memlimit_encoder(void);
-
-
-/// Get the memory usage limit for decoding. By default this is 30 % of RAM.
-extern uint64_t hardware_memlimit_decoder(void);
diff --git a/Build/source/utils/xz-4.999.8beta/src/xzdec/Makefile.am b/Build/source/utils/xz-4.999.8beta/src/xzdec/Makefile.am
deleted file mode 100644
index 84183fc07da..00000000000
--- a/Build/source/utils/xz-4.999.8beta/src/xzdec/Makefile.am
+++ /dev/null
@@ -1,34 +0,0 @@
-##
-## Copyright (C) 2007 Lasse Collin
-##
-## This program is free software; you can redistribute it and/or
-## modify it under the terms of the GNU Lesser General Public
-## License as published by the Free Software Foundation; either
-## version 2.1 of the License, or (at your option) any later version.
-##
-## This program is distributed in the hope that it will be useful,
-## but WITHOUT ANY WARRANTY; without even the implied warranty of
-## MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the GNU
-## Lesser General Public License for more details.
-##
-
-bin_PROGRAMS = xzdec lzmadec
-
-xzdec_SOURCES = xzdec.c
-xzdec_CPPFLAGS = \
- -I@top_srcdir@/src/common \
- -I@top_srcdir@/src/liblzma/api \
- -I@top_builddir@/lib
-xzdec_LDFLAGS = -static
-xzdec_LDADD = \
- @top_builddir@/src/liblzma/liblzma.la \
- @LTLIBINTL@
-
-if COND_GNULIB
-xzdec_LDADD += @top_builddir@/lib/libgnu.a
-endif
-
-lzmadec_SOURCES = $(xzdec_SOURCES)
-lzmadec_CPPFLAGS = $(xzdec_CPPFLAGS) -DLZMADEC
-lzmadec_LDFLAGS = $(xzdec_LDFLAGS)
-lzmadec_LDADD = $(xzdec_LDADD)
diff --git a/Build/source/utils/xz-4.999.8beta/tests/Makefile.am b/Build/source/utils/xz-4.999.8beta/tests/Makefile.am
deleted file mode 100644
index 3e5c1be7b8b..00000000000
--- a/Build/source/utils/xz-4.999.8beta/tests/Makefile.am
+++ /dev/null
@@ -1,53 +0,0 @@
-##
-## Copyright (C) 2007 Lasse Collin
-##
-## This library is free software; you can redistribute it and/or
-## modify it under the terms of the GNU Lesser General Public
-## License as published by the Free Software Foundation; either
-## version 2.1 of the License, or (at your option) any later version.
-##
-## This library is distributed in the hope that it will be useful,
-## but WITHOUT ANY WARRANTY; without even the implied warranty of
-## MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the GNU
-## Lesser General Public License for more details.
-##
-
-EXTRA_DIST = \
- files \
- tests.h \
- test_files.sh \
- test_compress.sh \
- bcj_test.c \
- compress_prepared_bcj_sparc \
- compress_prepared_bcj_x86
-
-AM_CPPFLAGS = \
- -I@top_srcdir@/src/common \
- -I@top_srcdir@/src/liblzma/api \
- -I@top_builddir@/lib
-
-LDADD = @top_builddir@/src/liblzma/liblzma.la
-
-if COND_GNULIB
-LDADD += @top_builddir@/lib/libgnu.a
-endif
-
-check_PROGRAMS = \
- create_compress_files \
- test_check \
- test_stream_flags \
- test_filter_flags \
- test_block_header \
- test_index
-
-TESTS = \
- test_check \
- test_stream_flags \
- test_filter_flags \
- test_block_header \
- test_index \
- test_files.sh \
- test_compress.sh
-
-clean-local:
- -rm -f compress_generated_*
diff --git a/Build/source/utils/xz-4.999.8beta/tests/test_files.sh b/Build/source/utils/xz-4.999.8beta/tests/test_files.sh
deleted file mode 100755
index b40a57a5273..00000000000
--- a/Build/source/utils/xz-4.999.8beta/tests/test_files.sh
+++ /dev/null
@@ -1,40 +0,0 @@
-#/bin/sh
-
-###############################################################################
-#
-# Copyright (C) 2008 Lasse Collin
-#
-# This library is free software; you can redistribute it and/or
-# modify it under the terms of the GNU Lesser General Public
-# License as published by the Free Software Foundation; either
-# version 2.1 of the License, or (at your option) any later version.
-#
-# This library is distributed in the hope that it will be useful,
-# but WITHOUT ANY WARRANTY; without even the implied warranty of
-# MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the GNU
-# Lesser General Public License for more details.
-#
-###############################################################################
-
-for I in "$srcdir"/files/good-*.xz
-do
- if ../src/xzdec/xzdec "$I" > /dev/null 2> /dev/null ; then
- :
- else
- echo "Good file failed: $I"
- (exit 1)
- exit 1
- fi
-done
-
-for I in "$srcdir"/files/bad-*.xz
-do
- if ../src/xzdec/xzdec "$I" > /dev/null 2> /dev/null ; then
- echo "Bad file succeeded: $I"
- (exit 1)
- exit 1
- fi
-done
-
-(exit 0)
-exit 0
diff --git a/Build/source/utils/xz-4.999.8beta/ABOUT-NLS b/Build/source/utils/xz-4.999.9beta/ABOUT-NLS
index ec20977e060..ec20977e060 100644
--- a/Build/source/utils/xz-4.999.8beta/ABOUT-NLS
+++ b/Build/source/utils/xz-4.999.9beta/ABOUT-NLS
diff --git a/Build/source/utils/xz-4.999.9beta/AUTHORS b/Build/source/utils/xz-4.999.9beta/AUTHORS
new file mode 100644
index 00000000000..63a9815bc03
--- /dev/null
+++ b/Build/source/utils/xz-4.999.9beta/AUTHORS
@@ -0,0 +1,27 @@
+
+Authors of XZ Utils
+===================
+
+ XZ Utils is developed and maintained by Lasse Collin
+ <lasse.collin@tukaani.org>.
+
+ Major parts of liblzma are based on code written by Igor Pavlov,
+ specifically the LZMA SDK <http://7-zip.org/sdk.html>. Without
+ this code, XZ Utils wouldn't exist.
+
+ The SHA-256 implementation in liblzma is based on the code found from
+ 7-Zip <http://7-zip.org/>, which has a modified version of the SHA-256
+ code found from Crypto++ <http://www.cryptopp.com/>. The SHA-256 code
+ in Crypto++ was written by Kevin Springle and Wei Dai.
+
+ Some scripts have been adapted from gzip. The original versions
+ were written by Jean-loup Gailly, Charles Levert, and Paul Eggert.
+ Andrew Dudman helped adapting the script and their man pages for
+ XZ Utils.
+
+ The GNU Autotools based build system contains files from many authors,
+ which I'm not trying list here.
+
+ Several people have contributed fixes or reported bugs. Most of them
+ are mentioned in the file THANKS.
+
diff --git a/Build/source/utils/xz-4.999.8beta/COPYING b/Build/source/utils/xz-4.999.9beta/COPYING
index 5a57860ae33..43c90d0598c 100644
--- a/Build/source/utils/xz-4.999.8beta/COPYING
+++ b/Build/source/utils/xz-4.999.9beta/COPYING
@@ -4,7 +4,7 @@ XZ Utils Licensing
Different licenses apply to different files in this package. Here
is a rough summary of which licenses apply to which parts of this
- package:
+ package (but check the individual files to be sure!):
- liblzma is in the public domain.
@@ -14,17 +14,24 @@ XZ Utils Licensing
GNU LGPLv2.1+.
- The scripts to grep, diff, and view compressed files have been
- adapted from gzip. These scripts are under GNU GPLv2+.
+ adapted from gzip. These scripts and their documentation are
+ under GNU GPLv2+.
- - Documentation is in the public domain.
+ - All the documentation in the doc directory and most of the
+ XZ Utils specific documentation files in other directories
+ are in the public domain.
- Translated messages are in the public domain.
- The build system contains public domain files, and files that
- are under GNU GPLv2+ or GNU GPLv3+.
+ are under GNU GPLv2+ or GNU GPLv3+. None of these files end up
+ in the binaries being built.
- - Test files, test code, and debugging utilities are in the
- public domain.
+ - Test files and test code in the tests directory, and debugging
+ utilities in the debug directory are in the public domain.
+
+ - The extra directory may contain public domain files, and files
+ that are under various free software licenses.
You can do whatever you want with the files that have been put into
the public domain. If you find public domain legally problematic,
@@ -34,18 +41,24 @@ XZ Utils Licensing
As usual, this software is provided "as is", without any warranty.
+ If you copy significant amounts of public domain code from XZ Utils
+ into your project, acknowledging this somewhere in your software is
+ polite (especially if it is proprietary, non-free software), but
+ naturally it is not legally required. Here is an example of a good
+ notice to put into "about box" or into documentation:
+
+ This software includes code from XZ Utils <http://tukaani.org/xz/>.
+
The following license texts are included in the following files:
- COPYING.LGPLv2.1: GNU Lesser General Public License version 2.1
- COPYING.GPLv2: GNU General Public License version 2
- COPYING.GPLv3: GNU General Public License version 3
-
-
-
Note that the toolchain (compiler, linker etc.) may add some code
pieces that are copyrighted. Thus, it is possible that e.g. liblzma
binary wouldn't actually be in the public domain in its entirety
- even though it contains no copyrighted code from this package.
+ even though it contains no copyrighted code from the XZ Utils source
+ package.
If you have questions, don't hesitate to ask the author(s) for more
information.
diff --git a/Build/source/utils/xz-4.999.8beta/COPYING.GPLv2 b/Build/source/utils/xz-4.999.9beta/COPYING.GPLv2
index d511905c164..d511905c164 100644
--- a/Build/source/utils/xz-4.999.8beta/COPYING.GPLv2
+++ b/Build/source/utils/xz-4.999.9beta/COPYING.GPLv2
diff --git a/Build/source/utils/xz-4.999.8beta/COPYING.GPLv3 b/Build/source/utils/xz-4.999.9beta/COPYING.GPLv3
index 94a9ed024d3..94a9ed024d3 100644
--- a/Build/source/utils/xz-4.999.8beta/COPYING.GPLv3
+++ b/Build/source/utils/xz-4.999.9beta/COPYING.GPLv3
diff --git a/Build/source/utils/xz-4.999.8beta/COPYING.LGPLv2.1 b/Build/source/utils/xz-4.999.9beta/COPYING.LGPLv2.1
index 5ab7695ab8c..5ab7695ab8c 100644
--- a/Build/source/utils/xz-4.999.8beta/COPYING.LGPLv2.1
+++ b/Build/source/utils/xz-4.999.9beta/COPYING.LGPLv2.1
diff --git a/Build/source/utils/xz-4.999.9beta/ChangeLog b/Build/source/utils/xz-4.999.9beta/ChangeLog
new file mode 100644
index 00000000000..15102ef62eb
--- /dev/null
+++ b/Build/source/utils/xz-4.999.9beta/ChangeLog
@@ -0,0 +1,7041 @@
+commit 682efdc1f9492fdd76c9ce82e7c00ca0768067e8
+Author: Lasse Collin <lasse.collin@tukaani.org>
+Date: 2009-08-27 18:36:59 +0300
+
+ "make dist" fixes
+
+ Makefile.am | 13 ++++++-------
+ 1 files changed, 6 insertions(+), 7 deletions(-)
+
+commit c8c184db1c95bf70f78256ec6237845a57f342af
+Author: Lasse Collin <lasse.collin@tukaani.org>
+Date: 2009-08-27 17:08:33 +0300
+
+ Update xz man page date.
+
+ src/xz/xz.1 | 2 +-
+ 1 files changed, 1 insertions(+), 1 deletions(-)
+
+commit 9756fce565e98b8fa5fe6ead296d84e7601ec254
+Author: Lasse Collin <lasse.collin@tukaani.org>
+Date: 2009-08-27 17:00:22 +0300
+
+ Fix the debug directory.
+
+ 6a2eb54092fc625d59921a607ff68cd1a90aa898 and
+ 71f18e8a066a01dda0c8e5508b135ef104e43e4c required
+ some changes that weren't applied in debug.
+
+ debug/Makefile.am | 5 +++--
+ debug/full_flush.c | 1 +
+ debug/known_sizes.c | 1 +
+ debug/memusage.c | 1 +
+ debug/sync_flush.c | 1 +
+ 5 files changed, 7 insertions(+), 2 deletions(-)
+
+commit 77007a7fb20187fcf3d1dd9839c79ace2d63f2ea
+Author: Lasse Collin <lasse.collin@tukaani.org>
+Date: 2009-08-27 16:36:40 +0300
+
+ Add missing files to EXTRA_DIST.
+
+ Makefile.am | 11 +++++++----
+ 1 files changed, 7 insertions(+), 4 deletions(-)
+
+commit 04dcbfdeb921e5f361a4487134e91e23fffbe09d
+Author: Lasse Collin <lasse.collin@tukaani.org>
+Date: 2009-08-27 16:21:22 +0300
+
+ Bumped version to 4.999.9beta.
+
+ src/liblzma/api/lzma/version.h | 2 +-
+ 1 files changed, 1 insertions(+), 1 deletions(-)
+
+commit fd7618611a22f42a6913bc8d518c9bbc9252d6b4
+Author: Lasse Collin <lasse.collin@tukaani.org>
+Date: 2009-08-27 16:17:47 +0300
+
+ Updated THANKS.
+
+ THANKS | 2 ++
+ 1 files changed, 2 insertions(+), 0 deletions(-)
+
+commit c29e76c0f910fca0a90a50b78d337f6c32623e9d
+Author: Lasse Collin <lasse.collin@tukaani.org>
+Date: 2009-08-27 16:12:52 +0300
+
+ .xz file format specification 1.0.4 (probably).
+
+ Thanks to Christian von Roques, Peter Lawler,
+ and Jim Meyering for the fixes.
+
+ doc/xz-file-format.txt | 26 +++++++++++++++-----------
+ 1 files changed, 15 insertions(+), 11 deletions(-)
+
+commit 696d7ee3953beaf4f0ed18e78917ccf300431966
+Author: Lasse Collin <lasse.collin@tukaani.org>
+Date: 2009-08-27 15:43:54 +0300
+
+ Require GNU libtool 2.2.
+
+ configure.ac | 13 +++----------
+ 1 files changed, 3 insertions(+), 10 deletions(-)
+
+commit 4c3558aa8305a8f8b6c43b8569eb539717ca9e8d
+Author: Lasse Collin <lasse.collin@tukaani.org>
+Date: 2009-08-27 15:34:45 +0300
+
+ Add "dos" to EXTRA_DIST.
+
+ Makefile.am | 1 +
+ 1 files changed, 1 insertions(+), 0 deletions(-)
+
+commit 35b29e4424ced5a3ababf132283e519080c7b298
+Author: Lasse Collin <lasse.collin@tukaani.org>
+Date: 2009-08-27 15:23:27 +0300
+
+ Updated TODO.
+
+ TODO | 6 ++++++
+ 1 files changed, 6 insertions(+), 0 deletions(-)
+
+commit 23414377192c21f3f34c84cdfe0ef0fbd06a1dea
+Author: Lasse Collin <lasse.collin@tukaani.org>
+Date: 2009-08-27 15:17:00 +0300
+
+ Some xz man page improvements.
+
+ src/xz/xz.1 | 78 ++++++++++++++++++++++++++++++++++++++++++++++------------
+ 1 files changed, 62 insertions(+), 16 deletions(-)
+
+commit 371b04e19fc9051dbaeec51ec0badec6a1f0699d
+Author: Lasse Collin <lasse.collin@tukaani.org>
+Date: 2009-08-27 10:41:01 +0300
+
+ Removed doc/bugs.txt.
+
+ doc/bugs.txt | 46 ----------------------------------------------
+ 1 files changed, 0 insertions(+), 46 deletions(-)
+
+commit d88c4072b36d3a76f839185799fb1d91037a1b81
+Author: Lasse Collin <lasse.collin@tukaani.org>
+Date: 2009-08-27 10:40:25 +0300
+
+ Updated README.
+
+ It now includes bug reporting instructions/tips.
+
+ README | 65 ++++++++++++++++++++++++++++++++++++++++++++++++++++++---------
+ 1 files changed, 55 insertions(+), 10 deletions(-)
+
+commit 92e536d8b8d33a6b12d0802bcd7be4437046f13e
+Author: Lasse Collin <lasse.collin@tukaani.org>
+Date: 2009-08-27 10:21:18 +0300
+
+ Fix a typo in FAQ.
+
+ Thanks to Jim Meyering.
+
+ (From now on, I try to always remember to put
+ the relevant thanks to commit messages.)
+
+ doc/faq.txt | 2 +-
+ 1 files changed, 1 insertions(+), 1 deletions(-)
+
+commit 3e2ba8b58585743e59251e69ad2783eb08357079
+Author: Lasse Collin <lasse.collin@tukaani.org>
+Date: 2009-08-27 10:13:46 +0300
+
+ Updates to liblzma API headers.
+
+ Added lzma_nothrow for every function. It adds
+ throw() when the header is used in C++ code.
+
+ Some lzma_attrs were added or removed.
+
+ Lots of comments were improved.
+
+ src/liblzma/api/lzma.h | 20 +++++++
+ src/liblzma/api/lzma/base.h | 48 +++++++++--------
+ src/liblzma/api/lzma/block.h | 38 +++++++-------
+ src/liblzma/api/lzma/check.h | 22 ++++----
+ src/liblzma/api/lzma/container.h | 36 +++++++------
+ src/liblzma/api/lzma/filter.h | 81 ++++++++++++++++++-----------
+ src/liblzma/api/lzma/index.h | 97 +++++++++++++++++++++--------------
+ src/liblzma/api/lzma/index_hash.h | 14 +++--
+ src/liblzma/api/lzma/lzma.h | 87 ++++++++++++++++---------------
+ src/liblzma/api/lzma/stream_flags.h | 12 ++--
+ src/liblzma/api/lzma/version.h | 10 ++--
+ src/liblzma/api/lzma/vli.h | 7 ++-
+ 12 files changed, 275 insertions(+), 197 deletions(-)
+
+commit 8e8ebc17c535a1f8846718059b48417409c37050
+Author: Lasse Collin <lasse.collin@tukaani.org>
+Date: 2009-08-18 00:30:09 +0300
+
+ Install faq.txt.
+
+ Makefile.am | 1 +
+ 1 files changed, 1 insertions(+), 0 deletions(-)
+
+commit b198e770a146e4a41f91a93f0b233713f2515848
+Author: Lasse Collin <lasse.collin@tukaani.org>
+Date: 2009-08-18 00:26:48 +0300
+
+ Updated faq.txt.
+
+ Some questions worth answering were removed, because I
+ currently don't have good up to date answers to them.
+
+ doc/faq.txt | 239 ++++++++++++++++++-----------------------------------------
+ 1 files changed, 73 insertions(+), 166 deletions(-)
+
+commit fe111a25cd788d31b581996e4533910388a7f0a9
+Author: Lasse Collin <lasse.collin@tukaani.org>
+Date: 2009-08-17 22:45:50 +0300
+
+ Some xz man changes.
+
+ src/xz/xz.1 | 88 +++++++++++++++++++++++++++++------------------------------
+ 1 files changed, 43 insertions(+), 45 deletions(-)
+
+commit 10242a21e9abda0c5c6a03501703cc40b8a699a5
+Author: Lasse Collin <lasse.collin@tukaani.org>
+Date: 2009-08-16 22:15:42 +0300
+
+ Updated THANKS.
+
+ THANKS | 1 +
+ 1 files changed, 1 insertions(+), 0 deletions(-)
+
+commit 3ce1916c83041113b9cad9ead5c97a527cf8aa1d
+Author: Lasse Collin <lasse.collin@tukaani.org>
+Date: 2009-08-16 22:15:13 +0300
+
+ Fix data corruption in LZ/LZMA2 encoder.
+
+ Thanks to Jonathan Stott for the bug report.
+
+ src/liblzma/lz/lz_encoder.h | 2 +-
+ 1 files changed, 1 insertions(+), 1 deletions(-)
+
+commit 66da129c8ec33dd66acc92f113f7c1ca740ca81a
+Author: Lasse Collin <lasse.collin@tukaani.org>
+Date: 2009-08-13 15:15:37 +0300
+
+ Updated INSTALL and PACKAGERS to match the changes
+ made in --enable-dynamic.
+
+ INSTALL | 20 ++++++++++++++++----
+ PACKAGERS | 11 ++++++-----
+ 2 files changed, 22 insertions(+), 9 deletions(-)
+
+commit 8238c4b2402f952c4e492e5b778aa272e57b6705
+Author: Lasse Collin <lasse.collin@tukaani.org>
+Date: 2009-08-13 15:03:46 +0300
+
+ Link lzmainfo against shared liblzma by default.
+
+ src/lzmainfo/Makefile.am | 4 ++--
+ 1 files changed, 2 insertions(+), 2 deletions(-)
+
+commit 71f18e8a066a01dda0c8e5508b135ef104e43e4c
+Author: Lasse Collin <lasse.collin@tukaani.org>
+Date: 2009-08-13 15:00:21 +0300
+
+ Make --enable-dynamic a tristate option.
+
+ Some programs will by default be linked against static
+ liblzma and some against shared liblzma. --enable-dynamic
+ now allows overriding the default to both directions
+ (all dynamic or all static) even when building both
+ shared and static liblzma.
+
+ This is quite messy compared to how simple thing it is supposed
+ to be. The complexity is mostly due to Windows support.
+
+ configure.ac | 77 +++++++++++++++++++++++++++++++++++++++++++---------------
+ 1 files changed, 57 insertions(+), 20 deletions(-)
+
+commit 5aa4678b2342dcfc1d2b31aa9fa4f39c539e4b61
+Author: Lasse Collin <lasse.collin@tukaani.org>
+Date: 2009-08-13 12:56:47 +0300
+
+ Fix xz Makefile.am for the man page.
+
+ install-exec-hook -> install-data-hook
+
+ src/xz/Makefile.am | 2 ++
+ 1 files changed, 2 insertions(+), 0 deletions(-)
+
+commit e51b4e49e800bd84e6d589dca2964d3985e88139
+Author: Lasse Collin <lasse.collin@tukaani.org>
+Date: 2009-08-13 12:55:45 +0300
+
+ Add lzmainfo for backward compatibility with LZMA Utils.
+
+ lzmainfo now links against static liblzma. In contrast
+ to other command line tools in XZ Utils, linking lzmainfo
+ against static liblzma by default is dumb. This will be
+ fixed once I have fixed some related issues in configure.ac.
+
+ configure.ac | 1 +
+ src/Makefile.am | 2 +-
+ src/lzmainfo/Makefile.am | 29 ++++++
+ src/lzmainfo/lzmainfo.1 | 55 +++++++++++
+ src/lzmainfo/lzmainfo.c | 242 ++++++++++++++++++++++++++++++++++++++++++++++
+ 5 files changed, 328 insertions(+), 1 deletions(-)
+
+commit a4165d0584376d948c213ec93c6065d24ff6a5e7
+Author: Lasse Collin <lasse.collin@tukaani.org>
+Date: 2009-08-13 12:42:36 +0300
+
+ Sync some error messages from xz to xzdec.
+
+ Make xz error message translation usable outside
+ xz (at least in upcoming lzmainfo).
+
+ src/xz/main.c | 4 ++--
+ src/xzdec/xzdec.c | 6 +++---
+ 2 files changed, 5 insertions(+), 5 deletions(-)
+
+commit df636eb4e066b4e154ce8e66e82c87ba1db652a6
+Author: Lasse Collin <lasse.collin@tukaani.org>
+Date: 2009-08-13 09:37:21 +0300
+
+ Add xz man page to manfiles in toplevel Makefile.am.
+
+ Makefile.am | 1 +
+ 1 files changed, 1 insertions(+), 0 deletions(-)
+
+commit 180bdf58ea5bb07941e0a99b304d9aa832198748
+Author: Lasse Collin <lasse.collin@tukaani.org>
+Date: 2009-08-13 09:37:01 +0300
+
+ Fix first line of xz man page.
+
+ src/xz/xz.1 | 2 +-
+ 1 files changed, 1 insertions(+), 1 deletions(-)
+
+commit e1ce2291e759b50ebfcf7cbbcc04cd098f1705a4
+Author: Lasse Collin <lasse.collin@tukaani.org>
+Date: 2009-08-10 11:22:31 +0300
+
+ Added a rough version of the xz man page.
+
+ src/xz/Makefile.am | 15 +
+ src/xz/xz.1 | 1206 ++++++++++++++++++++++++++++++++++++++++++++++++++++
+ 2 files changed, 1221 insertions(+), 0 deletions(-)
+
+commit e71903fc6101f1c039d702e335b08aad1e1b4100
+Author: Jonathan Nieder <jrnieder@gmail.com>
+Date: 2009-08-09 13:41:20 -0500
+
+ “xzdiff a.xz b.xz” always fails
+
+ Attempts to compare two compressed files result in no output and
+ exit status 2.
+
+ Instead of going to standard output, ‘diff’ output is being
+ captured in the xz_status variable along with the exit status from
+ the decompression commands. Later, when this variable is examined
+ for nonzero status codes, numerals from dates in the ‘diff’ output
+ make it appear as though decompression failed.
+
+ So let the ‘diff’ output leak to standard output with another file
+ descriptor. (This trick is used in all similar contexts elsewhere
+ in xzdiff and in the analogous context in gzip’s zdiff script.)
+
+ src/scripts/xzdiff.in | 2 +-
+ 1 files changed, 1 insertions(+), 1 deletions(-)
+
+commit 1d314b81aa5b0c4530638ffabd4e0edb52e5362c
+Author: Jonathan Nieder <jrnieder@gmail.com>
+Date: 2009-08-09 13:22:12 -0500
+
+ xzless: Support compressed standard input
+
+ It can be somewhat confusing that
+
+ less < some_file.txt
+
+ works fine, whereas
+
+ xzless < some_file.txt.xz
+
+ does not. Since version 429, ‘less’ allows a filter specified in
+ the LESSOPEN environment variable to preprocess its input even if
+ it comes from standard input, if $LESSOPEN begins with ‘|-’. So
+ set $LESSOPEN to take advantage of this feature.
+
+ Check less’s version at runtime so xzless can continue to work
+ with older versions.
+
+ src/scripts/xzless.in | 8 +++++++-
+ 1 files changed, 7 insertions(+), 1 deletions(-)
+
+commit a7f5d2fe4826ac68839d00059f05004fb81d5c69
+Author: Lasse Collin <lasse.collin@tukaani.org>
+Date: 2009-08-09 20:57:46 +0300
+
+ GPLv2+ not GPLv2 for Doxyfile.in is probably OK.
+
+ Doxyfile.in | 2 +-
+ 1 files changed, 1 insertions(+), 1 deletions(-)
+
+commit b735cde20cc14857136ae65a0e5d336ed7ddc862
+Author: Lasse Collin <lasse.collin@tukaani.org>
+Date: 2009-08-02 00:27:29 +0300
+
+ Added a copyright notice to Doxyfile.in since it contains
+ lots of comments from Doxygen.
+
+ It seems that the Doxygen authors' intent is to not apply
+ their copyright on generated files, but since it doesn't
+ matter for XZ Utils at all, better safe than sorry.
+
+ Doxyfile.in | 3 +++
+ 1 files changed, 3 insertions(+), 0 deletions(-)
+
+commit 0fd157cc008446adfc8f91394f5503868025a642
+Author: Lasse Collin <lasse.collin@tukaani.org>
+Date: 2009-08-02 00:11:37 +0300
+
+ Updated THANKS.
+
+ THANKS | 1 +
+ 1 files changed, 1 insertions(+), 0 deletions(-)
+
+commit b198da96ff9ac8c89b466b4d196c5f3fe1c7904f
+Author: Lasse Collin <lasse.collin@tukaani.org>
+Date: 2009-08-02 00:10:22 +0300
+
+ Updated TODO.
+
+ TODO | 4 ++++
+ 1 files changed, 4 insertions(+), 0 deletions(-)
+
+commit 669413bb2db954bbfde3c4542fddbbab53891eb4
+Author: Lasse Collin <lasse.collin@tukaani.org>
+Date: 2009-07-30 12:25:55 +0300
+
+ Updated THANKS.
+
+ THANKS | 1 +
+ 1 files changed, 1 insertions(+), 0 deletions(-)
+
+commit dbbd8fb870ae789d96497911006c869d37148c15
+Author: Jonathan Nieder <jrnieder@gmail.com>
+Date: 2009-07-28 17:37:24 -0500
+
+ xzdiff: add missing ;; to case statement
+
+ src/scripts/xzdiff.in | 6 +++---
+ 1 files changed, 3 insertions(+), 3 deletions(-)
+
+commit adbad2d16cb5909f85d4a429011005613ea62ffe
+Author: Lasse Collin <lasse.collin@tukaani.org>
+Date: 2009-07-24 13:15:06 +0300
+
+ Added history.txt to doc_DATA.
+
+ Makefile.am | 1 +
+ 1 files changed, 1 insertions(+), 0 deletions(-)
+
+commit e0236f12569eb36f9b81ce7a1e52e0f73698ac27
+Author: Lasse Collin <lasse.collin@tukaani.org>
+Date: 2009-07-24 12:00:40 +0300
+
+ Updated .gitignore files.
+
+ .gitignore | 36 +++++++++++++++++++-----------------
+ po/.gitignore | 3 +++
+ 2 files changed, 22 insertions(+), 17 deletions(-)
+
+commit 2f34fb269265e3aba43a2a9c734020a45268826d
+Author: Lasse Collin <lasse.collin@tukaani.org>
+Date: 2009-07-24 11:34:02 +0300
+
+ Minor improvements to COPYING.
+
+ COPYING | 11 ++++++++---
+ 1 files changed, 8 insertions(+), 3 deletions(-)
+
+commit 0db1befcfbc120377df4b89923762f16d25f548a
+Author: Lasse Collin <lasse.collin@tukaani.org>
+Date: 2009-07-23 19:10:55 +0300
+
+ Fix incorrect usage of getopt_long(), which caused
+ invalid memory access if XZ_OPT was defined.
+
+ src/xz/args.c | 1 -
+ 1 files changed, 0 insertions(+), 1 deletions(-)
+
+commit 8f8ec942d6d21ada2096eaf063411bc8bc7e2d48
+Author: Lasse Collin <lasse.collin@tukaani.org>
+Date: 2009-07-20 15:43:32 +0300
+
+ Avoid internal error with --format=xz --lzma1.
+
+ src/xz/coder.c | 16 ++++++++++++----
+ 1 files changed, 12 insertions(+), 4 deletions(-)
+
+commit 99f9e879a6a8bb54a65da99c12e0f390216c152a
+Author: Lasse Collin <lasse.collin@tukaani.org>
+Date: 2009-07-19 13:14:20 +0300
+
+ Major documentation update.
+
+ Installation and packaging instructions were added.
+ README and other generic docs were revised.
+
+ Some of the documentation files are now installed to $docdir.
+
+ AUTHORS | 35 ++++--
+ ChangeLog | 7 +-
+ INSTALL | 327 +++++++++++++++++++++++++++++++++++++++++++++++++++++++
+ INSTALL.generic | 302 ++++++++++++++++++++++++++++++++++++++++++++++++++
+ Makefile.am | 11 ++
+ PACKAGERS | 278 ++++++++++++++++++++++++++++++++++++++++++++++
+ README | 263 +++++++++++++++++++-------------------------
+ THANKS | 17 ++--
+ 8 files changed, 1070 insertions(+), 170 deletions(-)
+
+commit ef4cf1851de89022cba5674784f1a8f6343c15b0
+Author: Lasse Collin <lasse.collin@tukaani.org>
+Date: 2009-07-19 11:09:31 +0300
+
+ Added missing author notice to xzless.in.
+
+ src/scripts/xzless.in | 1 +
+ 1 files changed, 1 insertions(+), 0 deletions(-)
+
+commit 4c9c989d45b188667799a7a1d6c728ed43f7bf77
+Author: Lasse Collin <lasse.collin@tukaani.org>
+Date: 2009-07-18 18:54:55 +0300
+
+ Use AC_CONFIG_AUX_DIR to clean up the toplevel directory
+ a little.
+
+ Fixed a related bug in the toplevel Makefile.am.
+
+ Added the build-aux directory to .gitignore.
+
+ .gitignore | 1 +
+ Makefile.am | 1 -
+ configure.ac | 3 ++-
+ 3 files changed, 3 insertions(+), 2 deletions(-)
+
+commit 366e436090a7a87215e9bf0e3ddcd55f05b50587
+Author: Lasse Collin <lasse.collin@tukaani.org>
+Date: 2009-07-18 14:34:08 +0300
+
+ Updated the totally outdated TODO file.
+
+ TODO | 117 +++++++++++++++--------------------------------------------------
+ 1 files changed, 27 insertions(+), 90 deletions(-)
+
+commit 64e498c89d8b9966e8663f43bf64d47c26c55c62
+Author: Lasse Collin <lasse.collin@tukaani.org>
+Date: 2009-07-18 11:26:39 +0300
+
+ Added public domain notice into a few files.
+
+ src/common/common_w32res.rc | 9 ++++++++-
+ src/liblzma/liblzma.pc.in | 7 +++++++
+ src/liblzma/liblzma_w32res.rc | 7 +++++++
+ src/xz/xz_w32res.rc | 7 +++++++
+ src/xzdec/xzdec_w32res.rc | 7 +++++++
+ 5 files changed, 36 insertions(+), 1 deletions(-)
+
+commit a35755c5de808df027675688855d1b621a4fb428
+Author: Lasse Collin <lasse.collin@tukaani.org>
+Date: 2009-07-14 21:10:36 +0300
+
+ Allow extra commas in filter-specific options on xz command line.
+
+ This may slightly ease writing scripts that construct
+ filter-specific option strings dynamically.
+
+ src/xz/options.c | 7 +++++++
+ 1 files changed, 7 insertions(+), 0 deletions(-)
+
+commit 98f3cac1ad31191c5160a7e48398bf85141e941c
+Author: Lasse Collin <lasse.collin@tukaani.org>
+Date: 2009-07-14 18:04:31 +0300
+
+ Accept --lzma2=preset=6e where "e" is equivalent to --extreme
+ when no custom chain is in use.
+
+ src/xz/options.c | 80 +++++++++++++++++++++++++++++++++++++++--------------
+ 1 files changed, 59 insertions(+), 21 deletions(-)
+
+commit d873a09e956363e54bf58c577c8f7e487b6fb464
+Author: Lasse Collin <lasse.collin@tukaani.org>
+Date: 2009-07-12 19:08:30 +0300
+
+ Add dist-hook to create ChangeLog from the commit log,
+ and to conver the man pages to PDF and plain text, which
+ may be convenient to those who cannot render man pages.
+
+ Makefile.am | 31 +++++++++++++++++++++++++++++++
+ 1 files changed, 31 insertions(+), 0 deletions(-)
+
+commit cd69a5a6c16c289f6f8e2823b03c72289472270f
+Author: Lasse Collin <lasse.collin@tukaani.org>
+Date: 2009-07-10 11:39:38 +0300
+
+ BCJ filters: Reject invalid start offsets with LZMA_OPTIONS_ERROR.
+
+ This is a quick and slightly dirty fix to make the code
+ conform to the latest file format specification. Without
+ this patch, it's possible to make corrupt files by
+ specifying start offset that is not a multiple of the
+ filter's alignment. Custom start offset is almost never
+ used, so this was only a minor bug.
+
+ The xz command line tool doesn't validate the start offset,
+ so one will get a bit unclear error message if trying to use
+ an invalid start offset.
+
+ src/liblzma/simple/arm.c | 2 +-
+ src/liblzma/simple/armthumb.c | 2 +-
+ src/liblzma/simple/ia64.c | 2 +-
+ src/liblzma/simple/powerpc.c | 2 +-
+ src/liblzma/simple/simple_coder.c | 5 ++++-
+ src/liblzma/simple/simple_private.h | 3 ++-
+ src/liblzma/simple/sparc.c | 2 +-
+ src/liblzma/simple/x86.c | 2 +-
+ 8 files changed, 12 insertions(+), 8 deletions(-)
+
+commit eed9953732b801f6c97317fb3160445a8754180b
+Author: Lasse Collin <lasse.collin@tukaani.org>
+Date: 2009-07-10 11:33:21 +0300
+
+ Look for full command names instead of substrings
+ like "un", "cat", and "lz" when determining if
+ xz is run as unxz, xzcat, lzma, unlzma, or lzcat.
+
+ This is to ensure that if xz is renamed (e.g. via
+ --program-transform-name), it doesn't so easily
+ work in wrong mode.
+
+ src/xz/args.c | 22 +++++++++++++---------
+ 1 files changed, 13 insertions(+), 9 deletions(-)
+
+commit 6f62fa88f4ff7ba78565c314c0e6e71c498fa658
+Author: Lasse Collin <lasse.collin@tukaani.org>
+Date: 2009-07-08 23:06:46 +0300
+
+ Updated THANKS.
+
+ THANKS | 2 ++
+ 1 files changed, 2 insertions(+), 0 deletions(-)
+
+commit 1754b7e03e2aa7e2e0196807fe8b0f3f5a637b0e
+Author: Lasse Collin <lasse.collin@tukaani.org>
+Date: 2009-07-08 23:05:29 +0300
+
+ Portability improvement to version.sh.
+
+ version.sh | 3 ++-
+ 1 files changed, 2 insertions(+), 1 deletions(-)
+
+commit 3bdb53792c0e3e3febe9370e56eda5b08f89410f
+Author: Lasse Collin <lasse.collin@tukaani.org>
+Date: 2009-07-08 22:50:16 +0300
+
+ Remove --force from xzdec.
+
+ It was ignored for compatibility with xz, but now that
+ --decompress --stdout --force copies unrecognized files
+ as is to stdout, simply ignoring --force in xzdec would
+ be wrong. xzdec will not support copying unrecognized
+ data as is to stdout, so it cannot support --force.
+
+ src/xzdec/xzdec.1 | 5 -----
+ src/xzdec/xzdec.c | 5 +----
+ 2 files changed, 1 insertions(+), 9 deletions(-)
+
+commit 5f16ef4abf220028a9ddbcb138217597a9455f62
+Author: Lasse Collin <lasse.collin@tukaani.org>
+Date: 2009-07-06 10:36:04 +0300
+
+ Use sed instead of $(SED) so that we don't need to
+ use AC_PROG_SED. We don't do anything fancy with sed,
+ so this should work OK. libtool 2.2 sets SED but 1.5
+ doesn't, so $(SED) happened to work when using libtool 2.2.
+
+ src/liblzma/Makefile.am | 2 +-
+ src/scripts/Makefile.am | 28 ++++++++++++++--------------
+ src/xz/Makefile.am | 6 +++---
+ src/xzdec/Makefile.am | 6 +++---
+ 4 files changed, 21 insertions(+), 21 deletions(-)
+
+commit 96e4b257e101d72072d43e144897d92920270669
+Author: Lasse Collin <lasse.collin@tukaani.org>
+Date: 2009-07-05 22:25:17 +0300
+
+ Major update to the xzgrep and other scripts based on
+ the latest versions found from gzip CVS repository.
+
+ configure will try to find a POSIX shell to be used by
+ the scripts. This should ease portability on systems
+ which have pre-POSIX /bin/sh.
+
+ xzgrep and xzdiff support .xz, .lzma, .gz, and .bz2 files.
+ xzmore and xzless support only .xz and .lzma files.
+
+ The name of the xz executable used in these scripts is
+ now correct even if --program-transform-name has been used.
+
+ configure.ac | 14 ++++
+ m4/posix-shell.m4 | 63 +++++++++++++++
+ src/scripts/Makefile.am | 24 +++---
+ src/scripts/xzdiff | 67 ----------------
+ src/scripts/xzdiff.1 | 58 +++++++++-----
+ src/scripts/xzdiff.in | 172 +++++++++++++++++++++++++++++++++++++++++
+ src/scripts/xzgrep | 123 -----------------------------
+ src/scripts/xzgrep.1 | 85 ++++++++++++--------
+ src/scripts/xzgrep.in | 196 +++++++++++++++++++++++++++++++++++++++++++++++
+ src/scripts/xzless.1 | 66 ++++++++++++++++
+ src/scripts/xzless.in | 51 ++++++++++++
+ src/scripts/xzmore | 74 ------------------
+ src/scripts/xzmore.1 | 64 ++++++---------
+ src/scripts/xzmore.in | 78 +++++++++++++++++++
+ 14 files changed, 766 insertions(+), 369 deletions(-)
+
+commit 25cc7a6e8c2506a0d80084a4c1c67d33e7439100
+Author: Lasse Collin <lasse.collin@tukaani.org>
+Date: 2009-07-05 19:26:53 +0300
+
+ Use @PACKAGE_HOMEPAGE@ in liblzma.pc.in.
+
+ src/liblzma/liblzma.pc.in | 2 +-
+ 1 files changed, 1 insertions(+), 1 deletions(-)
+
+commit 18c10c30d2833f394cd7bce0e6a821044b15832f
+Author: Lasse Collin <lasse.collin@tukaani.org>
+Date: 2009-07-04 00:40:44 +0300
+
+ Make "xz --decompress --stdout --force" copy unrecognized
+ files as is to standard output.
+
+ This feature is needed to be more compatible with gzip's
+ behavior. This was more complicated to implement than it
+ sounds, because the way liblzma is able to return errors with
+ files of only a few bytes in size. xz now has its own file
+ type detection code and no longer uses lzma_auto_decoder().
+
+ src/xz/coder.c | 213 ++++++++++++++++++++++++++++++++++++++++++++++---------
+ 1 files changed, 178 insertions(+), 35 deletions(-)
+
+commit 0a289c01ac821ea9c4250aa906b0ae3cfa953633
+Author: Lasse Collin <lasse.collin@tukaani.org>
+Date: 2009-07-02 14:30:38 +0300
+
+ Define PACKAGE_HOMEPAGE in configure.ac and use it in
+ xz and xzdec.
+
+ Use also PACKAGE_NAME instead of hardcoding "XZ Utils".
+
+ configure.ac | 5 +++++
+ src/xz/message.c | 4 ++--
+ src/xzdec/xzdec.c | 4 ++--
+ 3 files changed, 9 insertions(+), 4 deletions(-)
+
+commit 5cc99db5bae8633f85559e5cdaef4cd905a4ee9c
+Author: Lasse Collin <lasse.collin@tukaani.org>
+Date: 2009-07-01 12:21:24 +0300
+
+ Avoid visibility related compiler warnings on Windows.
+
+ configure.ac | 20 +++++++++-----------
+ 1 files changed, 9 insertions(+), 11 deletions(-)
+
+commit 7653d1cf48080e63b189ed9d58dea0e82b6b1c5e
+Author: Lasse Collin <lasse.collin@tukaani.org>
+Date: 2009-06-30 17:14:39 +0300
+
+ Use static liblzma by default also for tests.
+
+ tests/Makefile.am | 5 ++++-
+ 1 files changed, 4 insertions(+), 1 deletions(-)
+
+commit f42ee981668b545ab6d06c6072e262c29605273c
+Author: Lasse Collin <lasse.collin@tukaani.org>
+Date: 2009-06-30 17:09:57 +0300
+
+ Build system fixes
+
+ Don't use libtool convenience libraries to avoid recently
+ discovered long-standing subtle but somewhat severe bugs
+ in libtool (at least 1.5.22 and 2.2.6 are affected). It
+ was found when porting XZ Utils to Windows
+ <http://lists.gnu.org/archive/html/libtool/2009-06/msg00070.html>
+ but the problem is significant also e.g. on GNU/Linux.
+
+ Unless --disable-shared is passed to configure, static
+ library built from a set of convenience libraries will
+ contain PIC objects. That is, while libtool builds non-PIC
+ objects too, only PIC objects will be used from the
+ convenience libraries. On 32-bit x86 (tested on mobile XP2400+),
+ using PIC instead of non-PIC makes the decompressor 10 % slower
+ with the default CFLAGS.
+
+ So while xz was linked against static liblzma by default,
+ it got the slower PIC objects unless --disable-shared was
+ used. I tend develop and benchmark with --disable-shared
+ due to faster build time, so I hadn't noticed the problem
+ in benchmarks earlier.
+
+ This commit also adds support for building Windows resources
+ into liblzma and executables.
+
+ configure.ac | 34 ++++++++++-----
+ src/liblzma/Makefile.am | 79 +++++++++++++++++++++++++++-------
+ src/liblzma/check/Makefile.am | 47 ---------------------
+ src/liblzma/check/Makefile.inc | 51 ++++++++++++++++++++++
+ src/liblzma/common/Makefile.am | 78 ----------------------------------
+ src/liblzma/common/Makefile.inc | 67 +++++++++++++++++++++++++++++
+ src/liblzma/common/common.h | 16 ++++---
+ src/liblzma/delta/Makefile.am | 28 ------------
+ src/liblzma/delta/Makefile.inc | 23 ++++++++++
+ src/liblzma/lz/Makefile.am | 29 -------------
+ src/liblzma/lz/Makefile.inc | 21 +++++++++
+ src/liblzma/lzma/Makefile.am | 51 ----------------------
+ src/liblzma/lzma/Makefile.inc | 43 +++++++++++++++++++
+ src/liblzma/rangecoder/Makefile.am | 26 -----------
+ src/liblzma/rangecoder/Makefile.inc | 21 +++++++++
+ src/liblzma/simple/Makefile.am | 51 ----------------------
+ src/liblzma/simple/Makefile.inc | 47 +++++++++++++++++++++
+ src/liblzma/subblock/Makefile.am | 26 -----------
+ src/liblzma/subblock/Makefile.inc | 20 +++++++++
+ src/xz/Makefile.am | 11 ++++-
+ src/xzdec/Makefile.am | 20 ++++++++-
+ 21 files changed, 417 insertions(+), 372 deletions(-)
+
+commit 89dac1db6f168d7469cfbc4432651d4724c5c0de
+Author: Lasse Collin <lasse.collin@tukaani.org>
+Date: 2009-06-29 22:19:51 +0300
+
+ Added a comment about "autoconf -fi" to autogen.sh.
+
+ autogen.sh | 3 +++
+ 1 files changed, 3 insertions(+), 0 deletions(-)
+
+commit 6e685aae4594bc0af1b5032e01bb37d0edaa3ebd
+Author: Lasse Collin <lasse.collin@tukaani.org>
+Date: 2009-06-28 10:04:24 +0300
+
+ Add -no-undefined to get shared liblzma on Windows.
+
+ src/liblzma/Makefile.am | 2 +-
+ 1 files changed, 1 insertions(+), 1 deletions(-)
+
+commit 73f560ee5fa064992b76688d9472baf139432540
+Author: Lasse Collin <lasse.collin@tukaani.org>
+Date: 2009-06-27 22:57:15 +0300
+
+ Make physmem() work on Cygwin 1.5 and older.
+
+ src/common/physmem.h | 77 ++++++++++++++++++++++++++------------------------
+ 1 files changed, 40 insertions(+), 37 deletions(-)
+
+commit 7ff0004fbce24ae72eddfe392828ffd7d4639ed1
+Author: Lasse Collin <lasse.collin@tukaani.org>
+Date: 2009-06-27 17:28:01 +0300
+
+ Moved the Windows resource files outside the windows directory
+ to prepare for building them with Autotools.
+
+ src/common/common_w32res.rc | 46 +++++++++++++++++++++++++++++++++++++++++
+ src/liblzma/liblzma_w32res.rc | 5 ++++
+ src/xz/xz_w32res.rc | 5 ++++
+ src/xzdec/lzmadec_w32res.rc | 5 ++++
+ src/xzdec/xzdec_w32res.rc | 5 ++++
+ windows/Makefile | 35 +++++++++++++++++--------------
+ windows/common.rc | 46 -----------------------------------------
+ windows/liblzma.rc | 5 ----
+ windows/lzmadec.rc | 5 ----
+ windows/xz.rc | 5 ----
+ windows/xzdec.rc | 5 ----
+ 11 files changed, 85 insertions(+), 82 deletions(-)
+
+commit 449c634674f35336a4815d398172e447659a135e
+Author: Lasse Collin <lasse.collin@tukaani.org>
+Date: 2009-06-27 13:05:03 +0300
+
+ Added missing $(EXEEXT).
+
+ src/xz/Makefile.am | 2 +-
+ 1 files changed, 1 insertions(+), 1 deletions(-)
+
+commit 792db79f27ad9ab1fb977e23be65c7761f545752
+Author: Lasse Collin <lasse.collin@tukaani.org>
+Date: 2009-06-27 12:32:40 +0300
+
+ Create correct symlinks even when
+ --program-{prefix,suffix,transform} is passed to configure.
+
+ src/scripts/Makefile.am | 80 +++++++++++++++++++++++++++--------------------
+ src/xz/Makefile.am | 21 +++++++-----
+ src/xzdec/Makefile.am | 9 +++--
+ 3 files changed, 65 insertions(+), 45 deletions(-)
+
+commit 0adc72feb84f5b903f6ad9d3f759b1c326fafc6b
+Author: Lasse Collin <lasse.collin@tukaani.org>
+Date: 2009-06-27 10:02:24 +0300
+
+ Silence a compiler warning on DOS-like systems.
+
+ src/xz/file_io.c | 5 ++++-
+ 1 files changed, 4 insertions(+), 1 deletions(-)
+
+commit ad12edc95254ede3f0cb8dec8645e8789e984c4f
+Author: Lasse Collin <lasse.collin@tukaani.org>
+Date: 2009-06-27 09:35:15 +0300
+
+ Updated the filenames in POTFILES.in too.
+
+ po/POTFILES.in | 4 ++--
+ 1 files changed, 2 insertions(+), 2 deletions(-)
+
+commit b2b1f867532732fe9969131f8713bdd6b0731763
+Author: Lasse Collin <lasse.collin@tukaani.org>
+Date: 2009-06-27 00:43:06 +0300
+
+ Hopefully improved portability of the assembler code in
+ Autotools based builds on Windows.
+
+ src/liblzma/check/crc32_x86.S | 8 +++++++-
+ src/liblzma/check/crc64_x86.S | 8 +++++++-
+ 2 files changed, 14 insertions(+), 2 deletions(-)
+
+commit c393055947247627a09b6a6b8f20aa0c32f9be16
+Author: Lasse Collin <lasse.collin@tukaani.org>
+Date: 2009-06-26 21:17:29 +0300
+
+ Updated THANKS (most of today's commits are based on
+ Charles Wilson's patches).
+
+ THANKS | 1 +
+ 1 files changed, 1 insertions(+), 0 deletions(-)
+
+commit da0af22e4b4139b8a10710945f8b245b3a77c97d
+Author: Lasse Collin <lasse.collin@tukaani.org>
+Date: 2009-06-26 21:00:35 +0300
+
+ Updated comments to match renamed files.
+
+ src/xz/coder.c | 2 +-
+ src/xz/coder.h | 2 +-
+ src/xz/file_io.c | 2 +-
+ src/xz/file_io.h | 2 +-
+ 4 files changed, 4 insertions(+), 4 deletions(-)
+
+commit 65014fd211dfbd4be48685998cb5a12aaa29c8d2
+Author: Lasse Collin <lasse.collin@tukaani.org>
+Date: 2009-06-26 20:49:54 +0300
+
+ Rename process.[hc] to coder.[hc] and io.[hc] to file_io.[hc]
+ to avoid problems on systems with system headers with those
+ names.
+
+ dos/Makefile | 4 +-
+ src/xz/Makefile.am | 8 +-
+ src/xz/coder.c | 488 +++++++++++++++++++++++++++++++++++
+ src/xz/coder.h | 57 ++++
+ src/xz/file_io.c | 716 ++++++++++++++++++++++++++++++++++++++++++++++++++++
+ src/xz/file_io.h | 86 +++++++
+ src/xz/io.c | 716 ----------------------------------------------------
+ src/xz/io.h | 86 -------
+ src/xz/private.h | 4 +-
+ src/xz/process.c | 488 -----------------------------------
+ src/xz/process.h | 57 ----
+ windows/Makefile | 4 +-
+ 12 files changed, 1357 insertions(+), 1357 deletions(-)
+
+commit 5e1257466dcb66f1d7a3f71814a5ad885cba43e8
+Author: Lasse Collin <lasse.collin@tukaani.org>
+Date: 2009-06-26 20:43:36 +0300
+
+ Rename process_file() to coder_run().
+
+ src/xz/main.c | 6 +++---
+ src/xz/process.c | 6 +++---
+ src/xz/process.h | 5 ++---
+ 3 files changed, 8 insertions(+), 9 deletions(-)
+
+commit cad62551c5fa9865dbe0841a0b3bc729c4fbe8fc
+Author: Lasse Collin <lasse.collin@tukaani.org>
+Date: 2009-06-26 20:36:45 +0300
+
+ Ugly hack to make it possible to use the thousand separator
+ format character with snprintf() on POSIX systems but not
+ on non-POSIX systems and still keep xgettext working.
+
+ dos/Makefile | 16 +++-------------
+ src/xz/message.c | 17 +++++++++--------
+ src/xz/process.c | 30 +++++++++++++++---------------
+ src/xz/util.c | 34 ++++++++++++++++++++++++++++++++++
+ src/xz/util.h | 20 ++++++++++++++++++++
+ windows/Makefile | 13 +++----------
+ 6 files changed, 84 insertions(+), 46 deletions(-)
+
+commit fe378d47074b16c52b00fe184d119287c68ce2e7
+Author: Lasse Collin <lasse.collin@tukaani.org>
+Date: 2009-06-26 15:40:40 +0300
+
+ Added missing source files to windows/Makefile.
+
+ windows/Makefile | 2 ++
+ 1 files changed, 2 insertions(+), 0 deletions(-)
+
+commit 390a6408563067613b29de895cb40e4d0386d62c
+Author: Lasse Collin <lasse.collin@tukaani.org>
+Date: 2009-06-26 15:37:53 +0300
+
+ Basic support for building with Cygwin and MinGW using
+ the Autotools based build system. It's not good yet, more
+ fixes will follow.
+
+ configure.ac | 7 +++++++
+ src/liblzma/api/lzma.h | 7 +++++--
+ src/liblzma/check/crc32_x86.S | 7 ++++---
+ src/liblzma/check/crc64_x86.S | 7 ++++---
+ src/liblzma/common/common.h | 2 +-
+ windows/Makefile | 16 +++++++---------
+ 6 files changed, 28 insertions(+), 18 deletions(-)
+
+commit 1c9360b7d1197457aaad2f8888b99f1149861579
+Author: Lasse Collin <lasse.collin@tukaani.org>
+Date: 2009-06-26 14:47:31 +0300
+
+ Fix @variables@ to $(variables) in Makefile.am files.
+ Fix the ordering of libgnu.a and LTLIBINTL on the linker
+ command line and added missing LTLIBINTL to tests/Makefile.am.
+
+ debug/Makefile.am | 12 ++++++------
+ src/liblzma/check/Makefile.am | 4 ++--
+ src/liblzma/common/Makefile.am | 16 ++++++++--------
+ src/liblzma/delta/Makefile.am | 4 ++--
+ src/liblzma/lz/Makefile.am | 6 +++---
+ src/liblzma/lzma/Makefile.am | 8 ++++----
+ src/liblzma/rangecoder/Makefile.am | 4 ++--
+ src/liblzma/simple/Makefile.am | 4 ++--
+ src/liblzma/subblock/Makefile.am | 4 ++--
+ src/xz/Makefile.am | 21 +++++++++++----------
+ src/xzdec/Makefile.am | 19 ++++++++++---------
+ tests/Makefile.am | 12 +++++++-----
+ 12 files changed, 59 insertions(+), 55 deletions(-)
+
+commit d45615c555e250209ebb55aa3649abe790f1eeac
+Author: Lasse Collin <lasse.collin@tukaani.org>
+Date: 2009-06-26 14:20:02 +0300
+
+ Allow to explicitly specify autotool versions in autogen.sh.
+
+ autogen.sh | 12 ++++++------
+ 1 files changed, 6 insertions(+), 6 deletions(-)
+
+commit eaf8367368a329afa48785380f9dca6b681f3397
+Author: Lasse Collin <lasse.collin@tukaani.org>
+Date: 2009-06-26 14:18:32 +0300
+
+ Add version.sh to EXTRA_DIST.
+
+ Makefile.am | 3 ++-
+ 1 files changed, 2 insertions(+), 1 deletions(-)
+
+commit b317b218e2d383dd27a700094c0de4510540ea18
+Author: Lasse Collin <lasse.collin@tukaani.org>
+Date: 2009-06-24 20:14:10 +0300
+
+ Support HW_PHYSMEM64
+
+ src/common/physmem.h | 30 +++++++++++++++++++-----------
+ 1 files changed, 19 insertions(+), 11 deletions(-)
+
+commit ae82dde5d9cc60c80cc89601b6c51cc1611d48e7
+Author: Lasse Collin <lasse.collin@tukaani.org>
+Date: 2009-06-24 13:01:59 +0300
+
+ Cast a char argument to isspace() to unsigned char.
+
+ src/xz/args.c | 11 +++++++++--
+ 1 files changed, 9 insertions(+), 2 deletions(-)
+
+commit 1735d31ea347210e914df038eeea4b2626e76e42
+Author: Lasse Collin <lasse.collin@tukaani.org>
+Date: 2009-06-05 13:46:26 +0300
+
+ A few more spelling fixes. Released the .xz spec 1.0.3.
+
+ doc/xz-file-format.txt | 12 +++++++-----
+ 1 files changed, 7 insertions(+), 5 deletions(-)
+
+commit 8ed156ce894966103e895aa08f2a9fb912f6fad5
+Author: Lasse Collin <lasse.collin@tukaani.org>
+Date: 2009-06-04 23:42:12 +0300
+
+ Added xzdec man page.
+
+ src/xzdec/Makefile.am | 11 +++
+ src/xzdec/xzdec.1 | 173 +++++++++++++++++++++++++++++++++++++++++++++++++
+ 2 files changed, 184 insertions(+), 0 deletions(-)
+
+commit f6df39afaa84f71439507178a49b2a5dda6e824c
+Author: Lasse Collin <lasse.collin@tukaani.org>
+Date: 2009-06-04 23:26:47 +0300
+
+ Harmonized xzdec --memory with xz --memory and made
+ minor cleanups.
+
+ src/xzdec/xzdec.c | 74 ++++++++++++++++++++++++++++++++++++++---------------
+ 1 files changed, 53 insertions(+), 21 deletions(-)
+
+commit 1774f27c61ce294a56712ca2f4785f90a62441bc
+Author: Lasse Collin <lasse.collin@tukaani.org>
+Date: 2009-06-04 22:59:55 +0300
+
+ Fix purporse -> purpose. Thanks to Andrew Dudman.
+ Released .xz spec 1.0.2 due to this fix too.
+
+ THANKS | 1 +
+ doc/xz-file-format.txt | 8 +++++---
+ src/liblzma/liblzma.pc.in | 2 +-
+ windows/Makefile | 2 +-
+ 4 files changed, 8 insertions(+), 5 deletions(-)
+
+commit cb613455642f48fb51059e22018615f64c59b70f
+Author: Lasse Collin <lasse.collin@tukaani.org>
+Date: 2009-06-01 14:53:57 +0300
+
+ The .xz file format version 1.0.1
+
+ doc/xz-file-format.txt | 29 ++++++++++++++++++++++-------
+ 1 files changed, 22 insertions(+), 7 deletions(-)
+
+commit 083c23c680ff844846d177cfc58bb7a874e7e6b9
+Author: Lasse Collin <lasse.collin@tukaani.org>
+Date: 2009-05-26 14:48:48 +0300
+
+ Make the raw value of the Check field available to applications
+ via lzma_block structure.
+
+ This changes ABI but not doesn't break API.
+
+ src/liblzma/api/lzma/block.h | 17 ++++++++++++++
+ src/liblzma/common/block_buffer_encoder.c | 1 +
+ src/liblzma/common/block_decoder.c | 34 ++++++++++++----------------
+ src/liblzma/common/block_encoder.c | 21 +++++++----------
+ 4 files changed, 42 insertions(+), 31 deletions(-)
+
+commit b4f5c814090dc07d4350453576305e41eb9c998d
+Author: Lasse Collin <lasse.collin@tukaani.org>
+Date: 2009-05-23 16:57:21 +0300
+
+ Remove undocumented alternative option names --bcj, --ppc,
+ and --itanium.
+
+ src/xz/args.c | 3 ---
+ 1 files changed, 0 insertions(+), 3 deletions(-)
+
+commit b1edee2cdc7ef4411b1a21c07094ec763f071281
+Author: Lasse Collin <lasse.collin@tukaani.org>
+Date: 2009-05-23 15:12:23 +0300
+
+ Add support for specifying the BCJ filter start offset
+ in the xz command line tool.
+
+ src/xz/args.c | 36 +++++++++++++++++++++---------------
+ src/xz/message.c | 14 ++++++++------
+ src/xz/options.c | 40 ++++++++++++++++++++++++++++++++++++++++
+ src/xz/options.h | 7 +++++++
+ 4 files changed, 76 insertions(+), 21 deletions(-)
+
+commit 72aa0e9c5f4289f10ef5bf240a9448d3017f1ceb
+Author: Lasse Collin <lasse.collin@tukaani.org>
+Date: 2009-05-23 14:51:09 +0300
+
+ Updated THANKS.
+
+ THANKS | 2 ++
+ 1 files changed, 2 insertions(+), 0 deletions(-)
+
+commit dcedb6998cefeca6597dd1219328a3abf5acf66d
+Author: Lasse Collin <lasse.collin@tukaani.org>
+Date: 2009-05-22 16:40:50 +0300
+
+ Added support for --quiet and --no-warn to xzdec.
+ Cleaned up the --help message a little.
+
+ src/xzdec/xzdec.c | 76 ++++++++++++++++++++++++++++++++++-------------------
+ 1 files changed, 49 insertions(+), 27 deletions(-)
+
+commit 5f735dae80aa629853f4831d7b84ec1c614979eb
+Author: Lasse Collin <lasse.collin@tukaani.org>
+Date: 2009-05-22 15:11:52 +0300
+
+ Use the 40 % of RAM memory usage limit in xzdec too.
+
+ Update the memory usage info text in --help to match
+ the text in xz --long-help.
+
+ src/xzdec/xzdec.c | 10 +++++-----
+ 1 files changed, 5 insertions(+), 5 deletions(-)
+
+commit b60376249e0c586910c4121fab4f791820cc1289
+Author: Lasse Collin <lasse.collin@tukaani.org>
+Date: 2009-05-22 14:43:00 +0300
+
+ Add --no-warn.
+
+ src/xz/args.c | 8 +++++++-
+ src/xz/main.c | 17 +++++++++++++++++
+ src/xz/main.h | 6 ++++++
+ src/xz/message.c | 4 ++++
+ 4 files changed, 34 insertions(+), 1 deletions(-)
+
+commit b4f92f522d4b854c0adb7c38be7531e1a6a7b008
+Author: Lasse Collin <lasse.collin@tukaani.org>
+Date: 2009-05-22 14:27:40 +0300
+
+ Fix a comment.
+
+ src/xz/main.h | 2 +-
+ 1 files changed, 1 insertions(+), 1 deletions(-)
+
+commit 4dd21d23f22569285ae706b58b0e5904b8db1839
+Author: Lasse Collin <lasse.collin@tukaani.org>
+Date: 2009-05-22 14:21:20 +0300
+
+ Remove the --info option, which was an alias for --list.
+
+ src/xz/args.c | 1 -
+ 1 files changed, 0 insertions(+), 1 deletions(-)
+
+commit 8836139b63ce774bdd62abf17ab69b290e08229e
+Author: Lasse Collin <lasse.collin@tukaani.org>
+Date: 2009-05-22 12:27:43 +0300
+
+ If xz is run as lzma, unlzma, or lzcat, simply imply
+ --format=lzma. This means that xz emulating lzma
+ doesn't decompress .xz files, while before this
+ commit it did. The new way is slightly simpler in
+ code and especially in upcoming documentation.
+
+ src/xz/args.c | 17 ++++++-----------
+ 1 files changed, 6 insertions(+), 11 deletions(-)
+
+commit b0063023f8adb06ea735ec4af5c6f5b7bdb8e84d
+Author: Lasse Collin <lasse.collin@tukaani.org>
+Date: 2009-05-22 11:29:50 +0300
+
+ Make the default memory usage limit 40 % of RAM for both
+ compressing and decompressing. This should be OK now that
+ xz automatically scales down the compression settings if
+ they would exceed the memory usage limit (earlier, the limit
+ for compression was increased to 90 % because low limit broke
+ scripts that used "xz -9" on systems with low RAM).
+
+ Support spcifying the memory usage limit as a percentage
+ of RAM (e.g. --memory=50%).
+
+ Support --threads=0 to reset the thread limit to the default
+ value (number of available CPU cores). Use UINT32_MAX instead
+ of SIZE_MAX as the maximum in args.c. hardware.c was already
+ expecting uint32_t value.
+
+ Cleaned up the output of --help and --long-help.
+
+ src/xz/args.c | 28 +++++++++++++----
+ src/xz/hardware.c | 86 ++++++++++++++++++++++------------------------------
+ src/xz/hardware.h | 10 +++---
+ src/xz/message.c | 28 ++++++++---------
+ src/xz/process.c | 18 ++++-------
+ 5 files changed, 82 insertions(+), 88 deletions(-)
+
+commit 071b825b23911a69dd1cd2f8cda004ef8a781fae
+Author: Lasse Collin <lasse.collin@tukaani.org>
+Date: 2009-05-21 17:22:01 +0300
+
+ Support special value "max" where xz and xzdec accept an integer.
+ Don't round the memory usage limit in xzdec --help to avoid
+ an integer overflow and to not give wrong impression that
+ the limit is high enough when it may not actually be.
+
+ src/xz/util.c | 4 ++++
+ src/xzdec/xzdec.c | 6 +++++-
+ 2 files changed, 9 insertions(+), 1 deletions(-)
+
+commit 03ca67fd37dd43fa7f590de340899cd497c10802
+Author: ABCD <en.abcd@gmail.com>
+Date: 2009-05-20 17:31:18 -0400
+
+ Install lzdiff, lzgrep, and lzmore as symlinks
+
+ This adds lzdiff, lzgrep, and lzmore to the list of symlinks to install.
+ It also installs symlinks for the manual pages and removes the new
+ symlinks on uninstall.
+
+ src/scripts/Makefile.am | 16 ++++++++++++++--
+ 1 files changed, 14 insertions(+), 2 deletions(-)
+
+commit a6f43e64128a6da5cd641de1e1e527433b3e5638
+Author: Lasse Collin <lasse.collin@tukaani.org>
+Date: 2009-05-02 16:10:14 +0300
+
+ Use a GCC-specific #pragma instead of GCC-specific
+ -Wno-uninitialized to silence a bogus warning.
+
+ configure.ac | 13 -------------
+ src/liblzma/check/Makefile.am | 5 -----
+ src/liblzma/check/sha256.c | 5 +++++
+ 3 files changed, 5 insertions(+), 18 deletions(-)
+
+commit f6ce63ebdb45a857c8949960c83c9580ae888951
+Author: Lasse Collin <lasse.collin@tukaani.org>
+Date: 2009-05-02 14:46:50 +0300
+
+ Removed --disable-encoder and --disable-decoder. Use the values
+ given to --enable-encoders and --enable-decoders to determine
+ if any encoder or decoder support is wanted.
+
+ configure.ac | 48 ++++++++----------------------------------------
+ 1 files changed, 8 insertions(+), 40 deletions(-)
+
+commit be06858d5cf8ba46557395035d821dc332f3f830
+Author: Lasse Collin <lasse.collin@tukaani.org>
+Date: 2009-05-01 11:28:52 +0300
+
+ Remove docs that are too outdated to be updated
+ (rewrite will be better).
+
+ doc/liblzma-advanced.txt | 324 ----------------------------------------------
+ doc/liblzma-hacking.txt | 112 ----------------
+ doc/liblzma-intro.txt | 194 ---------------------------
+ doc/liblzma-security.txt | 219 -------------------------------
+ doc/lzma-intro.txt | 107 ---------------
+ 5 files changed, 0 insertions(+), 956 deletions(-)
+
+commit 0255401e57c96af87c6b159eca28974e79430a82
+Author: Lasse Collin <lasse.collin@tukaani.org>
+Date: 2009-05-01 11:21:46 +0300
+
+ Added documentation about the legacy .lzma file format.
+
+ doc/lzma-file-format.txt | 166 ++++++++++++++++++++++++++++++++++++++++++++++
+ 1 files changed, 166 insertions(+), 0 deletions(-)
+
+commit 1496ff437c46f38303e0e94c511ca604b3a11f85
+Author: Lasse Collin <lasse.collin@tukaani.org>
+Date: 2009-05-01 11:20:23 +0300
+
+ Renamed the file format specification to xz-file-format.txt
+ which is the filename used on the WWW.
+
+ doc/file-format.txt | 1127 ------------------------------------------------
+ doc/xz-file-format.txt | 1127 ++++++++++++++++++++++++++++++++++++++++++++++++
+ 2 files changed, 1127 insertions(+), 1127 deletions(-)
+
+commit 21c6b94373d239d7e86bd480fcd558e30391712f
+Author: Lasse Collin <lasse.collin@tukaani.org>
+Date: 2009-04-28 23:08:32 +0300
+
+ Fixed a crash in liblzma.
+
+ liblzma tries to avoid useless free()/malloc() pairs in
+ initialization when multiple files are handled using the
+ same lzma_stream. This didn't work with filter chains
+ due to comparison of wrong pointers in lzma_next_coder_init(),
+ making liblzma think that no memory reallocation is needed
+ even when it actually is.
+
+ Easy way to trigger this bug is to decompress two files with
+ a single xz command. The first file should have e.g. x86+LZMA2
+ as the filter chain, and the second file just LZMA2.
+
+ src/liblzma/common/alone_decoder.c | 2 +-
+ src/liblzma/common/alone_encoder.c | 4 ++--
+ src/liblzma/common/auto_decoder.c | 2 +-
+ src/liblzma/common/block_decoder.c | 2 +-
+ src/liblzma/common/block_encoder.c | 2 +-
+ src/liblzma/common/common.h | 4 ++--
+ src/liblzma/common/easy_encoder.c | 2 +-
+ src/liblzma/common/index_decoder.c | 2 +-
+ src/liblzma/common/index_encoder.c | 2 +-
+ src/liblzma/common/stream_decoder.c | 2 +-
+ src/liblzma/common/stream_encoder.c | 2 +-
+ 11 files changed, 13 insertions(+), 13 deletions(-)
+
+commit e518d167aa5958e469982f4fb3a24b9b6a2b5d1c
+Author: Lasse Collin <lasse.collin@tukaani.org>
+Date: 2009-04-15 14:13:38 +0300
+
+ Fix uint32_t -> size_t in ARM and ARM-Thumb filters.
+
+ On 64-bit system it would have gone into infinite
+ loop if a single input buffer was over 4 GiB (unlikely).
+
+ src/liblzma/simple/arm.c | 2 +-
+ src/liblzma/simple/armthumb.c | 2 +-
+ 2 files changed, 2 insertions(+), 2 deletions(-)
+
+commit 31decdce041581e57c0d8a407d4795b114ef27ca
+Author: Lasse Collin <lasse.collin@tukaani.org>
+Date: 2009-04-14 11:48:46 +0300
+
+ Minor fixes to test files' README.
+
+ tests/files/README | 17 +++++++++--------
+ 1 files changed, 9 insertions(+), 8 deletions(-)
+
+commit 4787d654434891c7df5b43959b0d2873718f06e0
+Author: Lasse Collin <lasse.collin@tukaani.org>
+Date: 2009-04-13 16:36:41 +0300
+
+ Updated history.txt.
+
+ doc/history.txt | 123 +++++++++++++++++++++++++++++-------------------------
+ 1 files changed, 66 insertions(+), 57 deletions(-)
+
+commit 2f0bc9cd40f709152a0177c8e585c0757e9af9c9
+Author: Lasse Collin <lasse.collin@tukaani.org>
+Date: 2009-04-13 14:49:48 +0300
+
+ Quick & dirty update to support xz in diff/grep/more scripts.
+
+ src/scripts/Makefile.am | 38 +++++++++-----
+ src/scripts/lzdiff | 67 -------------------------
+ src/scripts/lzdiff.1 | 51 -------------------
+ src/scripts/lzgrep | 123 -----------------------------------------------
+ src/scripts/lzgrep.1 | 61 -----------------------
+ src/scripts/lzmore | 74 ----------------------------
+ src/scripts/lzmore.1 | 55 ---------------------
+ src/scripts/xzdiff | 67 +++++++++++++++++++++++++
+ src/scripts/xzdiff.1 | 58 ++++++++++++++++++++++
+ src/scripts/xzgrep | 123 +++++++++++++++++++++++++++++++++++++++++++++++
+ src/scripts/xzgrep.1 | 77 +++++++++++++++++++++++++++++
+ src/scripts/xzmore | 74 ++++++++++++++++++++++++++++
+ src/scripts/xzmore.1 | 66 +++++++++++++++++++++++++
+ 13 files changed, 489 insertions(+), 445 deletions(-)
+
+commit 02ddf09bc3079b3e17297729b9e43f14d407b8fc
+Author: Lasse Collin <lasse.collin@tukaani.org>
+Date: 2009-04-13 11:27:40 +0300
+
+ Put the interesting parts of XZ Utils into the public domain.
+ Some minor documentation cleanups were made at the same time.
+
+ COPYING | 67 ++++++++++++++++++------
+ ChangeLog | 2 +-
+ Doxyfile.in | 8 ++-
+ Makefile.am | 13 +----
+ autogen.sh | 9 +++
+ configure.ac | 13 +----
+ debug/Makefile.am | 13 +----
+ debug/crc32.c | 13 +----
+ debug/full_flush.c | 13 +----
+ debug/hex2bin.c | 7 +--
+ debug/known_sizes.c | 13 +----
+ debug/memusage.c | 13 +----
+ debug/repeat.c | 13 +----
+ debug/sync_flush.c | 13 +----
+ doc/faq.txt | 38 +------------
+ lib/Makefile.am | 18 +++---
+ src/Makefile.am | 13 +----
+ src/common/bswap.h | 7 +--
+ src/common/cpucores.h | 7 +--
+ src/common/integer.h | 7 +--
+ src/common/mythread.h | 4 +-
+ src/common/open_stdxxx.h | 7 +--
+ src/common/physmem.h | 7 +--
+ src/common/sysdefs.h | 13 +----
+ src/liblzma/Makefile.am | 13 +----
+ src/liblzma/api/Makefile.am | 13 +----
+ src/liblzma/api/lzma.h | 38 ++++++++-----
+ src/liblzma/api/lzma/base.h | 20 +++----
+ src/liblzma/api/lzma/bcj.h | 18 +++----
+ src/liblzma/api/lzma/block.h | 18 +++----
+ src/liblzma/api/lzma/check.h | 18 +++----
+ src/liblzma/api/lzma/container.h | 18 +++----
+ src/liblzma/api/lzma/delta.h | 18 +++----
+ src/liblzma/api/lzma/filter.h | 18 +++----
+ src/liblzma/api/lzma/index.h | 18 +++----
+ src/liblzma/api/lzma/index_hash.h | 22 +++-----
+ src/liblzma/api/lzma/lzma.h | 18 +++----
+ src/liblzma/api/lzma/stream_flags.h | 18 +++----
+ src/liblzma/api/lzma/subblock.h | 18 +++----
+ src/liblzma/api/lzma/version.h | 18 +++----
+ src/liblzma/api/lzma/vli.h | 42 +++++++--------
+ src/liblzma/check/Makefile.am | 8 +--
+ src/liblzma/check/check.c | 7 +--
+ src/liblzma/check/check.h | 7 +--
+ src/liblzma/check/crc32_fast.c | 30 ++++------
+ src/liblzma/check/crc32_small.c | 7 +--
+ src/liblzma/check/crc32_table.c | 7 +--
+ src/liblzma/check/crc32_tablegen.c | 7 +--
+ src/liblzma/check/crc32_x86.S | 21 +++++---
+ src/liblzma/check/crc64_fast.c | 20 +++----
+ src/liblzma/check/crc64_small.c | 7 +--
+ src/liblzma/check/crc64_table.c | 7 +--
+ src/liblzma/check/crc64_tablegen.c | 7 +--
+ src/liblzma/check/crc64_x86.S | 14 +++--
+ src/liblzma/check/crc_macros.h | 9 ++--
+ src/liblzma/check/sha256.c | 23 +++++---
+ src/liblzma/common/Makefile.am | 13 +----
+ src/liblzma/common/alone_decoder.c | 13 +----
+ src/liblzma/common/alone_decoder.h | 13 +----
+ src/liblzma/common/alone_encoder.c | 13 +----
+ src/liblzma/common/auto_decoder.c | 13 +----
+ src/liblzma/common/block_buffer_decoder.c | 13 +----
+ src/liblzma/common/block_buffer_encoder.c | 13 +----
+ src/liblzma/common/block_decoder.c | 13 +----
+ src/liblzma/common/block_decoder.h | 13 +----
+ src/liblzma/common/block_encoder.c | 13 +----
+ src/liblzma/common/block_encoder.h | 13 +----
+ src/liblzma/common/block_header_decoder.c | 13 +----
+ src/liblzma/common/block_header_encoder.c | 13 +----
+ src/liblzma/common/block_util.c | 13 +----
+ src/liblzma/common/bsr.h | 7 +--
+ src/liblzma/common/chunk_size.c | 13 +----
+ src/liblzma/common/common.c | 13 +----
+ src/liblzma/common/common.h | 13 +----
+ src/liblzma/common/easy_buffer_encoder.c | 13 +----
+ src/liblzma/common/easy_decoder_memusage.c | 13 +----
+ src/liblzma/common/easy_encoder.c | 13 +----
+ src/liblzma/common/easy_encoder_memusage.c | 13 +----
+ src/liblzma/common/easy_preset.c | 13 +----
+ src/liblzma/common/easy_preset.h | 13 +----
+ src/liblzma/common/filter_buffer_decoder.c | 13 +----
+ src/liblzma/common/filter_buffer_encoder.c | 13 +----
+ src/liblzma/common/filter_common.c | 13 +----
+ src/liblzma/common/filter_common.h | 13 +----
+ src/liblzma/common/filter_decoder.c | 13 +----
+ src/liblzma/common/filter_decoder.h | 13 +----
+ src/liblzma/common/filter_encoder.c | 13 +----
+ src/liblzma/common/filter_encoder.h | 13 +----
+ src/liblzma/common/filter_flags_decoder.c | 13 +----
+ src/liblzma/common/filter_flags_encoder.c | 13 +----
+ src/liblzma/common/index.c | 13 +----
+ src/liblzma/common/index.h | 13 +----
+ src/liblzma/common/index_decoder.c | 13 +----
+ src/liblzma/common/index_encoder.c | 13 +----
+ src/liblzma/common/index_encoder.h | 13 +----
+ src/liblzma/common/index_hash.c | 13 +----
+ src/liblzma/common/stream_buffer_decoder.c | 13 +----
+ src/liblzma/common/stream_buffer_encoder.c | 13 +----
+ src/liblzma/common/stream_decoder.c | 13 +----
+ src/liblzma/common/stream_decoder.h | 13 +----
+ src/liblzma/common/stream_encoder.c | 13 +----
+ src/liblzma/common/stream_encoder.h | 13 +----
+ src/liblzma/common/stream_flags_common.c | 13 +----
+ src/liblzma/common/stream_flags_common.h | 13 +----
+ src/liblzma/common/stream_flags_decoder.c | 13 +----
+ src/liblzma/common/stream_flags_encoder.c | 13 +----
+ src/liblzma/common/vli_decoder.c | 13 +----
+ src/liblzma/common/vli_encoder.c | 13 +----
+ src/liblzma/common/vli_size.c | 13 +----
+ src/liblzma/delta/Makefile.am | 13 +----
+ src/liblzma/delta/delta_common.c | 13 +----
+ src/liblzma/delta/delta_common.h | 13 +----
+ src/liblzma/delta/delta_decoder.c | 13 +----
+ src/liblzma/delta/delta_decoder.h | 13 +----
+ src/liblzma/delta/delta_encoder.c | 13 +----
+ src/liblzma/delta/delta_encoder.h | 13 +----
+ src/liblzma/delta/delta_private.h | 13 +----
+ src/liblzma/lz/Makefile.am | 13 +----
+ src/liblzma/lz/lz_decoder.c | 17 ++----
+ src/liblzma/lz/lz_decoder.h | 17 ++----
+ src/liblzma/lz/lz_encoder.c | 17 ++----
+ src/liblzma/lz/lz_encoder.h | 17 ++----
+ src/liblzma/lz/lz_encoder_hash.h | 13 +----
+ src/liblzma/lz/lz_encoder_mf.c | 17 ++----
+ src/liblzma/lzma/Makefile.am | 13 +----
+ src/liblzma/lzma/fastpos.h | 17 ++----
+ src/liblzma/lzma/fastpos_tablegen.c | 17 ++----
+ src/liblzma/lzma/lzma2_decoder.c | 17 ++----
+ src/liblzma/lzma/lzma2_decoder.h | 17 ++----
+ src/liblzma/lzma/lzma2_encoder.c | 17 ++----
+ src/liblzma/lzma/lzma2_encoder.h | 17 ++----
+ src/liblzma/lzma/lzma_common.h | 17 ++----
+ src/liblzma/lzma/lzma_decoder.c | 17 ++----
+ src/liblzma/lzma/lzma_decoder.h | 17 ++----
+ src/liblzma/lzma/lzma_encoder.c | 17 ++----
+ src/liblzma/lzma/lzma_encoder.h | 17 ++----
+ src/liblzma/lzma/lzma_encoder_optimum_fast.c | 13 +----
+ src/liblzma/lzma/lzma_encoder_optimum_normal.c | 13 +----
+ src/liblzma/lzma/lzma_encoder_presets.c | 13 +----
+ src/liblzma/lzma/lzma_encoder_private.h | 17 ++----
+ src/liblzma/rangecoder/Makefile.am | 13 +----
+ src/liblzma/rangecoder/price.h | 13 +----
+ src/liblzma/rangecoder/price_tablegen.c | 16 ++----
+ src/liblzma/rangecoder/range_common.h | 17 ++----
+ src/liblzma/rangecoder/range_decoder.h | 17 ++----
+ src/liblzma/rangecoder/range_encoder.h | 17 ++----
+ src/liblzma/simple/Makefile.am | 13 +----
+ src/liblzma/simple/arm.c | 17 ++----
+ src/liblzma/simple/armthumb.c | 17 ++----
+ src/liblzma/simple/ia64.c | 17 ++----
+ src/liblzma/simple/powerpc.c | 17 ++----
+ src/liblzma/simple/simple_coder.c | 13 +----
+ src/liblzma/simple/simple_coder.h | 14 +----
+ src/liblzma/simple/simple_decoder.c | 13 +----
+ src/liblzma/simple/simple_decoder.h | 13 +----
+ src/liblzma/simple/simple_encoder.c | 13 +----
+ src/liblzma/simple/simple_encoder.h | 13 +----
+ src/liblzma/simple/simple_private.h | 13 +----
+ src/liblzma/simple/sparc.c | 17 ++----
+ src/liblzma/simple/x86.c | 17 ++----
+ src/liblzma/subblock/Makefile.am | 13 +----
+ src/liblzma/subblock/subblock_decoder.c | 13 +----
+ src/liblzma/subblock/subblock_decoder.h | 13 +----
+ src/liblzma/subblock/subblock_decoder_helper.c | 13 +----
+ src/liblzma/subblock/subblock_decoder_helper.h | 13 +----
+ src/liblzma/subblock/subblock_encoder.c | 13 +----
+ src/liblzma/subblock/subblock_encoder.h | 13 +----
+ src/scripts/Makefile.am | 7 +++
+ src/xz/Makefile.am | 13 +----
+ src/xz/args.c | 13 +----
+ src/xz/args.h | 13 +----
+ src/xz/hardware.c | 13 +----
+ src/xz/hardware.h | 13 +----
+ src/xz/io.c | 13 +----
+ src/xz/io.h | 13 +----
+ src/xz/list.c | 13 +----
+ src/xz/main.c | 13 +----
+ src/xz/main.h | 13 +----
+ src/xz/message.c | 13 +----
+ src/xz/message.h | 13 +----
+ src/xz/options.c | 13 +----
+ src/xz/options.h | 13 +----
+ src/xz/private.h | 13 +----
+ src/xz/process.c | 13 +----
+ src/xz/process.h | 13 +----
+ src/xz/signals.c | 13 +----
+ src/xz/signals.h | 13 +----
+ src/xz/suffix.c | 13 +----
+ src/xz/suffix.h | 13 +----
+ src/xz/util.c | 13 +----
+ src/xz/util.h | 13 +----
+ src/xzdec/Makefile.am | 13 +----
+ src/xzdec/xzdec.c | 13 +----
+ tests/Makefile.am | 13 +----
+ tests/bcj_test.c | 7 +--
+ tests/create_compress_files.c | 13 +----
+ tests/test_block.c | 13 +----
+ tests/test_block_header.c | 13 +----
+ tests/test_check.c | 13 +----
+ tests/test_compress.sh | 13 +----
+ tests/test_files.sh | 13 +----
+ tests/test_filter_flags.c | 13 +----
+ tests/test_index.c | 13 +----
+ tests/test_stream_flags.c | 13 +----
+ tests/tests.h | 13 +----
+ windows/common.rc | 2 +-
+ 206 files changed, 866 insertions(+), 2021 deletions(-)
+
+commit e79c42d854657ae7f75613bd80c1a35ff7c525cb
+Author: Lasse Collin <lasse.collin@tukaani.org>
+Date: 2009-04-10 11:17:02 +0300
+
+ Fix off-by-one in LZ decoder.
+
+ Fortunately, this bug had no security risk other than accepting
+ some corrupt files as valid.
+
+ src/liblzma/lz/lz_decoder.h | 2 +-
+ 1 files changed, 1 insertions(+), 1 deletions(-)
+
+commit 94eb9ad46f1fded6d8369cf3d38bb9754c1375af
+Author: Pavel Roskin <proski@gnu.org>
+Date: 2009-03-31 12:15:01 -0400
+
+ Fix minor typos in README
+
+ README | 6 +++---
+ 1 files changed, 3 insertions(+), 3 deletions(-)
+
+commit 9bab5336ebd765ec4e12252f416eefdf04eba750
+Author: Lasse Collin <lasse.collin@tukaani.org>
+Date: 2009-03-31 21:52:51 +0300
+
+ Add a note and work-around instructions to README about
+ problems detecting a C99 compiler when some standard
+ headers are missing.
+
+ README | 11 +++++++++++
+ 1 files changed, 11 insertions(+), 0 deletions(-)
+
+commit a0497ff7a06f9350349264fe9b52dfefc6d53ead
+Author: Lasse Collin <lasse.collin@tukaani.org>
+Date: 2009-03-18 16:54:38 +0200
+
+ Updated THANKS.
+
+ THANKS | 1 +
+ 1 files changed, 1 insertions(+), 0 deletions(-)
+
+commit 390e69887fc5e0a108eb41203bed9acd100a3d76
+Author: Lasse Collin <lasse.collin@tukaani.org>
+Date: 2009-03-18 16:51:41 +0200
+
+ Fix wrong macro names in lc_cpucores.m4 and cpucores.h.
+ Thanks to Bert Wesarg.
+
+ m4/lc_cpucores.m4 | 4 ++--
+ src/common/cpucores.h | 4 ++--
+ 2 files changed, 4 insertions(+), 4 deletions(-)
+
+commit 0df9299e2478c2a0c62c05b1ae14a85a353e20d6
+Author: Lasse Collin <lasse.collin@tukaani.org>
+Date: 2009-03-01 09:03:08 +0200
+
+ Test for Linux-specific sysinfo() only on Linux systems.
+ Some other systems have sysinfo() with different semantics.
+
+ m4/lc_physmem.m4 | 28 +++++++++++++++++++---------
+ 1 files changed, 19 insertions(+), 9 deletions(-)
+
+commit cf751edfde3ad6e088dc18e0522d31ae38405933
+Author: Lasse Collin <lasse.collin@tukaani.org>
+Date: 2009-03-01 09:00:06 +0200
+
+ Added AC_CONFIG_MACRO_DIR to configure.ac.
+
+ configure.ac | 1 +
+ 1 files changed, 1 insertions(+), 0 deletions(-)
+
+commit 63df14c57dee7c461717784287056688482a7eb9
+Author: Lasse Collin <lasse.collin@tukaani.org>
+Date: 2009-03-01 08:58:41 +0200
+
+ Fix the Autoconf test for getopt_long replacement.
+ It was broken by e114502b2bc371e4a45449832cb69be036360722.
+
+ m4/getopt.m4 | 4 ++++
+ 1 files changed, 4 insertions(+), 0 deletions(-)
+
+commit fd6a380f4eda4f00be5f2aa8d222992cd74a714f
+Author: Lasse Collin <lasse.collin@tukaani.org>
+Date: 2009-02-22 19:07:54 +0200
+
+ Add a rough explanation of --extreme to output of --help.
+
+ src/xz/message.c | 4 ++++
+ 1 files changed, 4 insertions(+), 0 deletions(-)
+
+commit 68bf7ac2984d3627369a240ef0491934d53f7899
+Author: Lasse Collin <lasse.collin@tukaani.org>
+Date: 2009-02-22 18:52:49 +0200
+
+ Fixes to progress message handling in xz:
+
+ - Don't use Windows-specific code on Windows. The old code
+ required at least Windows 2000. Now it should work on
+ Windows 98 and later, and maybe on Windows 95 too.
+
+ - Use less precision when showing estimated remaining time.
+
+ - Fix some small design issues.
+
+ src/xz/message.c | 483 ++++++++++++++++++++++++++++++++++--------------------
+ src/xz/message.h | 28 ++-
+ src/xz/process.c | 53 +++---
+ 3 files changed, 351 insertions(+), 213 deletions(-)
+
+commit 47c2e21f82242f50f18713a27d644c2c94ab3fea
+Author: Lasse Collin <lasse.collin@tukaani.org>
+Date: 2009-02-18 13:00:10 +0200
+
+ Added files missing from the previous commit.
+
+ src/liblzma/api/lzma/container.h | 33 +++++++++++++++++++++++++++++++++
+ src/liblzma/common/Makefile.am | 7 ++++++-
+ 2 files changed, 39 insertions(+), 1 deletions(-)
+
+commit 489a3dbaa0465f04400804e956a1cfbbee3654a2
+Author: Lasse Collin <lasse.collin@tukaani.org>
+Date: 2009-02-17 10:43:00 +0200
+
+ Added lzma_easy_buffer_encode(). Splitted easy.c into small
+ pieces to avoid unneeded dependencies making statically
+ linked applications bigger than needed.
+
+ dos/Makefile | 6 +-
+ src/liblzma/common/easy.c | 128 ----------------------------
+ src/liblzma/common/easy_buffer_encoder.c | 34 ++++++++
+ src/liblzma/common/easy_decoder_memusage.c | 31 +++++++
+ src/liblzma/common/easy_encoder.c | 87 +++++++++++++++++++
+ src/liblzma/common/easy_encoder_memusage.c | 31 +++++++
+ src/liblzma/common/easy_preset.c | 34 ++++++++
+ src/liblzma/common/easy_preset.h | 39 +++++++++
+ windows/Makefile | 6 +-
+ 9 files changed, 266 insertions(+), 130 deletions(-)
+
+commit 7494816ab08d82f4d6409788825930c4e43cfd0d
+Author: Lasse Collin <lasse.collin@tukaani.org>
+Date: 2009-02-15 15:48:45 +0200
+
+ Make physmem.h work on old Windows versions.
+ Thanks to Hongbo Ni for the original patch.
+
+ src/common/physmem.h | 31 +++++++++++++++++++++++++++----
+ 1 files changed, 27 insertions(+), 4 deletions(-)
+
+commit 11ae4ae35fd70182c713f2d914b7cb1143bc76f0
+Author: Lasse Collin <lasse.collin@tukaani.org>
+Date: 2009-02-14 20:44:52 +0200
+
+ Fix microsecond vs. nanosecond confusion in my_time().
+
+ src/xz/message.c | 2 +-
+ 1 files changed, 1 insertions(+), 1 deletions(-)
+
+commit 3084d662d2646ab7eb58daf0dc32cf3f9a74eec7
+Author: Lasse Collin <lasse.collin@tukaani.org>
+Date: 2009-02-14 00:45:29 +0200
+
+ Cleanups to the code that detects the amount of RAM and
+ the number of CPU cores. Added support for using sysinfo()
+ on Linux systems whose libc lacks appropriate sysconf()
+ support (at least dietlibc). The Autoconf macros were
+ split into separate files, and CPU core count detection
+ was moved from hardware.c to cpucores.h. The core count
+ isn't used for anything real for now, so a problematic
+ part in process.c was commented out.
+
+ configure.ac | 89 +-----------------------------------------------
+ m4/lc_cpucores.m4 | 57 +++++++++++++++++++++++++++++++
+ m4/lc_physmem.m4 | 74 ++++++++++++++++++++++++++++++++++++++++
+ src/common/cpucores.h | 52 ++++++++++++++++++++++++++++
+ src/common/physmem.h | 21 +++++++----
+ src/xz/args.c | 4 +-
+ src/xz/hardware.c | 50 ++++++++++++---------------
+ src/xz/hardware.h | 11 ++++--
+ src/xz/message.c | 5 ++-
+ src/xz/process.c | 2 +
+ 10 files changed, 235 insertions(+), 130 deletions(-)
+
+commit 9c62371eab2706c46b1072f5935e28cb4cd9dca8
+Author: Lasse Collin <lasse.collin@tukaani.org>
+Date: 2009-02-13 18:23:50 +0200
+
+ Initial port to DOS using DJGPP.
+
+ dos/Makefile | 261 ++++++++++++++++++++++++++++++++++++++++++++++++++++++++++
+ dos/README | 113 +++++++++++++++++++++++++
+ dos/config.h | 150 +++++++++++++++++++++++++++++++++
+ 3 files changed, 524 insertions(+), 0 deletions(-)
+
+commit 0dae8b7751d09e9c5a482d5519daaee4800ce203
+Author: Lasse Collin <lasse.collin@tukaani.org>
+Date: 2009-02-13 18:02:05 +0200
+
+ Windows port: Take advantage of the version number macros.
+ Now the version number is not duplicated in the
+ Windows-specific files anymore.
+
+ windows/Makefile | 2 +-
+ windows/common.rc | 16 ++++++++--------
+ windows/config.h | 15 ---------------
+ 3 files changed, 9 insertions(+), 24 deletions(-)
+
+commit fdbc0cfa71f7d660855098a609175ba384259529
+Author: Lasse Collin <lasse.collin@tukaani.org>
+Date: 2009-02-13 18:00:03 +0200
+
+ Changed how the version number is specified in various places.
+ Now configure.ac will get the version number directly from
+ src/liblzma/api/lzma/version.h. The intent is to reduce the
+ number of places where the version number is duplicated. In
+ future, support for displaying Git commit ID may be added too.
+
+ configure.ac | 3 +-
+ src/liblzma/api/lzma/version.h | 70 ++++++++++++++++++++++++++++++++++++++--
+ src/liblzma/common/common.c | 2 +-
+ src/xz/message.c | 2 +-
+ src/xzdec/xzdec.c | 2 +-
+ version.sh | 23 +++++++++++++
+ 6 files changed, 95 insertions(+), 7 deletions(-)
+
+commit 1d924e584b146136989f48c13fff2632896efb3d
+Author: Lasse Collin <lasse.collin@tukaani.org>
+Date: 2009-02-13 17:30:30 +0200
+
+ Fix handling of integrity check type in the xz command line tool.
+
+ src/xz/args.c | 9 ++++++++-
+ src/xz/process.c | 4 ++++
+ 2 files changed, 12 insertions(+), 1 deletions(-)
+
+commit 96c46df7deb231ea68a03d8d1da9de4c774e36d8
+Author: Lasse Collin <lasse.collin@tukaani.org>
+Date: 2009-02-13 17:29:02 +0200
+
+ Improve support for DOS-like systems.
+ Here DOS-like means DOS, Windows, and OS/2.
+
+ src/common/physmem.h | 12 ++++++++++++
+ src/common/sysdefs.h | 4 ++++
+ src/liblzma/check/crc32_x86.S | 6 +++---
+ src/liblzma/check/crc64_x86.S | 6 +++---
+ src/xz/args.c | 13 +++++--------
+ src/xz/io.c | 39 +++++++++++++++++++++++++--------------
+ src/xz/main.c | 23 +++++++++++++++++++++++
+ src/xz/message.c | 3 +++
+ src/xz/suffix.c | 5 +++++
+ src/xzdec/xzdec.c | 5 +++--
+ 10 files changed, 86 insertions(+), 30 deletions(-)
+
+commit b6a30ee8c2de60ecd722cd05223e4ba72f822e33
+Author: Lasse Collin <lasse.collin@tukaani.org>
+Date: 2009-02-11 20:02:32 +0200
+
+ Remove dead directories from .gitignore.
+
+ .gitignore | 2 --
+ 1 files changed, 0 insertions(+), 2 deletions(-)
+
+commit 1ec5b0027911d94cb6f98892cbc690f818d8a861
+Author: Jim Meyering <jim@meyering.net>
+Date: 2009-02-11 14:45:14 +0100
+
+ .gitignore vs. Makefiles
+
+ How about this for those of us who do srcdir builds?
+
+ .gitignore | 22 ++++++++++++++++++++++
+ 1 files changed, 22 insertions(+), 0 deletions(-)
+
+commit 154f5aec2de201c674841de4fcc9804c2a87af07
+Author: Lasse Collin <lasse.collin@tukaani.org>
+Date: 2009-02-10 21:48:35 +0200
+
+ Removed Makefile from .gitignore since not all Makefiles
+ in the repository are generated by Autotools. People
+ should do test builds in a separate build directory anyway.
+
+ .gitignore | 1 -
+ 1 files changed, 0 insertions(+), 1 deletions(-)
+
+commit e605c2663691b0a4c307786aa368d124ea081daa
+Author: Lasse Collin <lasse.collin@tukaani.org>
+Date: 2009-02-10 21:48:05 +0200
+
+ Added resource files for the Windows build.
+
+ windows/Makefile | 37 ++++++++++++++++++++++---------------
+ windows/common.rc | 46 ++++++++++++++++++++++++++++++++++++++++++++++
+ windows/liblzma.rc | 5 +++++
+ windows/lzmadec.rc | 5 +++++
+ windows/xz.rc | 5 +++++
+ windows/xzdec.rc | 5 +++++
+ 6 files changed, 88 insertions(+), 15 deletions(-)
+
+commit a3bbbe05d32b1f7ea9eb98805df4dda2e811b476
+Author: Lasse Collin <lasse.collin@tukaani.org>
+Date: 2009-02-09 14:54:31 +0200
+
+ Let the user specify custom CFLAGS on the make command
+ line. Previously custom CFLAGS worked only when they were
+ passed to configure.
+
+ configure.ac | 58 +++++++++++++++++++++-------------------
+ src/liblzma/check/Makefile.am | 2 +-
+ 2 files changed, 31 insertions(+), 29 deletions(-)
+
+commit 53f7598998b1860a69c51243b5d2e34623c6bf60
+Author: Lasse Collin <lasse.collin@tukaani.org>
+Date: 2009-02-08 21:35:11 +0200
+
+ Fix aliasing issue in physmem.h.
+
+ src/common/physmem.h | 19 ++++++++++---------
+ 1 files changed, 10 insertions(+), 9 deletions(-)
+
+commit 0e27028d74c5c7a8e036ae2a9b8cecb0ac79d3a6
+Author: Lasse Collin <lasse.collin@tukaani.org>
+Date: 2009-02-08 18:24:50 +0200
+
+ Add a separate internal function to initialize the CRC32
+ table, which is used also by LZ encoder. This was needed
+ because calling lzma_crc32() and ignoring the result is
+ a no-op due to lzma_attr_pure.
+
+ src/liblzma/check/check.h | 1 +
+ src/liblzma/check/crc32_small.c | 10 +++++++++-
+ src/liblzma/lz/lz_encoder.c | 4 ++--
+ 3 files changed, 12 insertions(+), 3 deletions(-)
+
+commit ae1ad9af54210c9a2be336b1316532da5071516c
+Author: Lasse Collin <lasse.collin@tukaani.org>
+Date: 2009-02-08 18:17:05 +0200
+
+ Make "xz --force" to write to terminal as the error
+ message suggests.
+
+ src/xz/main.c | 2 +-
+ 1 files changed, 1 insertions(+), 1 deletions(-)
+
+commit 79e25eded48d2fe33f31441ab7a034f902e335f8
+Author: Lasse Collin <lasse.collin@tukaani.org>
+Date: 2009-02-08 10:37:50 +0200
+
+ Support both slash and backslash as path component
+ separator on Windows when parsing argv[0].
+
+ src/xz/args.c | 9 +++++++++
+ 1 files changed, 9 insertions(+), 0 deletions(-)
+
+commit bc7c7109cc4410055a888c1c70cbd1c9445c4361
+Author: Lasse Collin <lasse.collin@tukaani.org>
+Date: 2009-02-07 23:18:13 +0200
+
+ Omit the wrong and (even if corrected) nowadays useless rm
+ from autogen.sh.
+
+ autogen.sh | 28 ----------------------------
+ 1 files changed, 0 insertions(+), 28 deletions(-)
+
+commit edfc2031e56f8a2ccda063f02936b3a848d88723
+Author: Lasse Collin <lasse.collin@tukaani.org>
+Date: 2009-02-07 21:41:52 +0200
+
+ Updated THANKS.
+
+ THANKS | 1 +
+ 1 files changed, 1 insertions(+), 0 deletions(-)
+
+commit 880c3309386aac58fc4f3d7ca99bd31bcb1526a3
+Author: Lasse Collin <lasse.collin@tukaani.org>
+Date: 2009-02-07 21:17:07 +0200
+
+ Make it easy to choose if command line tools should be
+ linked statically or dynamically against liblzma. The
+ default is still to use static liblzma, but it can now
+ be changed by passing --enable-dynamic to configure.
+ Thanks to Mike Frysinger for the original patch.
+
+ Fixed a few minor bugs in configure.ac.
+
+ configure.ac | 39 +++++++++++++++++++++++++++++++++++++++
+ src/xz/Makefile.am | 8 +++-----
+ src/xzdec/Makefile.am | 5 +++--
+ 3 files changed, 45 insertions(+), 7 deletions(-)
+
+commit 3f86532407e4ace3debb62be16035e009b56ca36
+Author: Mike Frysinger <vapier@gentoo.org>
+Date: 2009-02-06 23:38:39 -0500
+
+ add gitignore files
+
+ Signed-off-by: Mike Frysinger <vapier@gentoo.org>
+
+ .gitignore | 32 ++++++++++++++++++++++++++++++++
+ m4/.gitignore | 35 +++++++++++++++++++++++++++++++++++
+ po/.gitignore | 12 ++++++++++++
+ 3 files changed, 79 insertions(+), 0 deletions(-)
+
+commit bd7ca1dad5c146b6217799ffaa230c32d207a3e5
+Author: Lasse Collin <lasse.collin@tukaani.org>
+Date: 2009-02-07 17:07:52 +0200
+
+ Assume 32 MiB of RAM on unsupported operating systems like
+ the comment in hardware.c already said.
+
+ src/xz/hardware.c | 2 +-
+ 1 files changed, 1 insertions(+), 1 deletions(-)
+
+commit d0ab8c1c73ae712adb0d26fbb9da762d99a63618
+Author: Lasse Collin <lasse.collin@tukaani.org>
+Date: 2009-02-07 16:26:58 +0200
+
+ MinGW support: Don't build fastpos_tablegen.c as part of
+ liblzma. Build both static and dynamic liblzma, and also
+ static and dynamic versions of the command line tools.
+
+ windows/Makefile | 92 ++++++++++++++++++++++++++++++++++++++++-------------
+ windows/README | 10 ------
+ 2 files changed, 69 insertions(+), 33 deletions(-)
+
+commit bfd91198e44a52bd9bfe3cd6dcae5edab7c6eb45
+Author: Lasse Collin <lasse.collin@tukaani.org>
+Date: 2009-02-07 15:55:47 +0200
+
+ Support LZMA_API_STATIC in assembler files to
+ avoid __declspec(dllexport) equivalent.
+
+ src/liblzma/check/crc32_x86.S | 4 ++++
+ src/liblzma/check/crc64_x86.S | 2 ++
+ 2 files changed, 6 insertions(+), 0 deletions(-)
+
+commit 3306cf3883492720b3c34baa02f4eb4227d91c73
+Author: Lasse Collin <lasse.collin@tukaani.org>
+Date: 2009-02-07 11:11:50 +0200
+
+ Introduced LZMA_API_STATIC macro, which the applications
+ need to #define when linking against static liblzma on
+ platforms like Windows. Most developers don't need to
+ care about LZMA_API_STATIC at all.
+
+ src/liblzma/api/lzma.h | 31 ++++++++++++++++++++++++-------
+ src/liblzma/common/common.h | 2 +-
+ 2 files changed, 25 insertions(+), 8 deletions(-)
+
+commit b719e63c5f4c91d2d5e2ea585d4c055ec3767d0b
+Author: Lasse Collin <lasse.collin@tukaani.org>
+Date: 2009-02-06 16:55:45 +0200
+
+ Another grammar fix
+
+ README | 2 +-
+ 1 files changed, 1 insertions(+), 1 deletions(-)
+
+commit fe5434f940f75fec3611cf9d9edf78c4da8ac760
+Author: Lasse Collin <lasse.collin@tukaani.org>
+Date: 2009-02-06 12:30:23 +0200
+
+ Grammar fix in README.
+
+ README | 2 +-
+ 1 files changed, 1 insertions(+), 1 deletions(-)
+
+commit 3dfa58a9eedf5a0e566452b078801c9cbcf7a245
+Author: Lasse Collin <lasse.collin@tukaani.org>
+Date: 2009-02-06 10:06:32 +0200
+
+ Some MSYS installations (e.g. MsysGit) don't include
+ install.exe, so don't rely on it.
+
+ windows/Makefile | 12 +++++++-----
+ windows/README | 11 ++++++-----
+ 2 files changed, 13 insertions(+), 10 deletions(-)
+
+commit 975d8fd72a5148d46b2e1745f7a211cf1dfd9d31
+Author: Lasse Collin <lasse.collin@tukaani.org>
+Date: 2009-02-06 09:13:15 +0200
+
+ Recreated the BCJ test files for x86 and SPARC. The old files
+ were linked with crt*.o, which are copyrighted, and thus the
+ old test files were not in the public domain as a whole. They
+ are freely distributable though, but it is better to be careful
+ and avoid including any copyrighted pieces in the test files.
+ The new files are just compiled and assembled object files,
+ and thus don't contain any copyrighted code.
+
+ tests/bcj_test.c | 2 +-
+ tests/compress_prepared_bcj_sparc | Bin 6804 -> 1240 bytes
+ tests/compress_prepared_bcj_x86 | Bin 4649 -> 1388 bytes
+ tests/files/good-1-sparc-lzma2.xz | Bin 2296 -> 612 bytes
+ tests/files/good-1-x86-lzma2.xz | Bin 1936 -> 716 bytes
+ 5 files changed, 1 insertions(+), 1 deletions(-)
+
+commit 094b1b09a531f0d201ec81f2b07346a995fd80b9
+Author: Lasse Collin <lasse.collin@tukaani.org>
+Date: 2009-02-05 21:21:27 +0200
+
+ Add the "windows" directory to EXTRA_DIST.
+
+ Makefile.am | 1 +
+ 1 files changed, 1 insertions(+), 0 deletions(-)
+
+commit e1c3412eec7acec7ca3b32c9c828f3147dc65b49
+Author: Lasse Collin <lasse.collin@tukaani.org>
+Date: 2009-02-05 09:17:51 +0200
+
+ Added initial experimental makefile for use with MinGW.
+
+ windows/Makefile | 253 ++++++++++++++++++++++++++++++++++++++++++++++++++++++
+ windows/README | 164 +++++++++++++++++++++++++++++++++++
+ windows/config.h | 180 ++++++++++++++++++++++++++++++++++++++
+ 3 files changed, 597 insertions(+), 0 deletions(-)
+
+commit 75905a9afc0ee89954ede7d08af70d1148bf0fd9
+Author: Lasse Collin <lasse.collin@tukaani.org>
+Date: 2009-02-05 09:12:57 +0200
+
+ Various code cleanups the the xz command line tool.
+ It now builds with MinGW.
+
+ src/common/physmem.h | 13 ++++
+ src/xz/Makefile.am | 2 +
+ src/xz/args.h | 8 --
+ src/xz/hardware.h | 10 +---
+ src/xz/io.c | 93 +++++++++++++++++++-------
+ src/xz/io.h | 12 +--
+ src/xz/main.c | 132 ++-----------------------------------
+ src/xz/main.h | 22 ------
+ src/xz/message.c | 65 ++++++++++++++++--
+ src/xz/message.h | 6 --
+ src/xz/options.h | 8 --
+ src/xz/private.h | 18 ++++--
+ src/xz/process.h | 10 +---
+ src/xz/signals.c | 180 ++++++++++++++++++++++++++++++++++++++++++++++++++
+ src/xz/signals.h | 51 ++++++++++++++
+ src/xz/suffix.h | 5 --
+ src/xz/util.c | 5 +-
+ src/xz/util.h | 5 --
+ 18 files changed, 399 insertions(+), 246 deletions(-)
+
+commit d0c0b9e94e0af59d1d8f7f4829695d6efe19ccfe
+Author: Lasse Collin <lasse.collin@tukaani.org>
+Date: 2009-02-03 12:15:17 +0200
+
+ Another utime() fix.
+
+ src/xz/io.c | 9 +++++----
+ 1 files changed, 5 insertions(+), 4 deletions(-)
+
+commit ccf92a29e8c7234284f1568c1ec0fd7cb98356ca
+Author: Lasse Collin <lasse.collin@tukaani.org>
+Date: 2009-02-03 10:41:11 +0200
+
+ Fix wrong filename argument for utime() and utimes().
+ This doesn't affect most systems, since most systems
+ have better functions available.
+
+ src/xz/io.c | 4 ++--
+ 1 files changed, 2 insertions(+), 2 deletions(-)
+
+commit 99c1c2abfae2e87f3c17e929783e6d1bb7a3f302
+Author: Lasse Collin <lasse.collin@tukaani.org>
+Date: 2009-02-02 21:19:01 +0200
+
+ Updated the x86 assembler code:
+ - Use call/ret pair to get instruction pointer for PIC.
+ - Use PIC only if PIC or __PIC__ is #defined.
+ - The code should work on MinGW and Darwin in addition
+ to GNU/Linux and Solaris.
+
+ configure.ac | 6 ---
+ src/liblzma/check/crc32_x86.S | 84 +++++++++++++++++++++++++++++++++++------
+ src/liblzma/check/crc64_x86.S | 82 +++++++++++++++++++++++++++++++++++-----
+ 3 files changed, 144 insertions(+), 28 deletions(-)
+
+commit 22a0c6dd940b78cdac2f4a4b4b0e7cc0ac15021f
+Author: Lasse Collin <lasse.collin@tukaani.org>
+Date: 2009-02-02 20:14:03 +0200
+
+ Modify LZMA_API macro so that it works on Windows with
+ other compilers than MinGW. This may hurt readability
+ of the API headers slightly, but I don't know any
+ better way to do this.
+
+ src/liblzma/api/lzma.h | 6 ++--
+ src/liblzma/api/lzma/base.h | 11 ++++---
+ src/liblzma/api/lzma/block.h | 22 +++++++-------
+ src/liblzma/api/lzma/check.h | 10 +++---
+ src/liblzma/api/lzma/container.h | 22 +++++++-------
+ src/liblzma/api/lzma/filter.h | 28 ++++++++++----------
+ src/liblzma/api/lzma/index.h | 40 ++++++++++++++--------------
+ src/liblzma/api/lzma/index_hash.h | 10 +++---
+ src/liblzma/api/lzma/lzma.h | 6 ++--
+ src/liblzma/api/lzma/stream_flags.h | 10 +++---
+ src/liblzma/api/lzma/version.h | 4 +-
+ src/liblzma/api/lzma/vli.h | 6 ++--
+ src/liblzma/check/check.c | 4 +-
+ src/liblzma/check/crc32_fast.c | 2 +-
+ src/liblzma/check/crc32_small.c | 2 +-
+ src/liblzma/check/crc64_fast.c | 2 +-
+ src/liblzma/check/crc64_small.c | 2 +-
+ src/liblzma/common/alone_decoder.c | 2 +-
+ src/liblzma/common/alone_encoder.c | 2 +-
+ src/liblzma/common/auto_decoder.c | 2 +-
+ src/liblzma/common/block_buffer_decoder.c | 2 +-
+ src/liblzma/common/block_buffer_encoder.c | 4 +-
+ src/liblzma/common/block_decoder.c | 2 +-
+ src/liblzma/common/block_encoder.c | 2 +-
+ src/liblzma/common/block_header_decoder.c | 2 +-
+ src/liblzma/common/block_header_encoder.c | 4 +-
+ src/liblzma/common/block_util.c | 6 ++--
+ src/liblzma/common/chunk_size.c | 2 +-
+ src/liblzma/common/common.c | 16 +++++-----
+ src/liblzma/common/common.h | 2 +-
+ src/liblzma/common/easy.c | 6 ++--
+ src/liblzma/common/filter_buffer_decoder.c | 2 +-
+ src/liblzma/common/filter_buffer_encoder.c | 2 +-
+ src/liblzma/common/filter_decoder.c | 8 +++---
+ src/liblzma/common/filter_encoder.c | 12 ++++----
+ src/liblzma/common/filter_flags_decoder.c | 2 +-
+ src/liblzma/common/filter_flags_encoder.c | 4 +-
+ src/liblzma/common/index.c | 32 +++++++++++-----------
+ src/liblzma/common/index_decoder.c | 4 +-
+ src/liblzma/common/index_encoder.c | 4 +-
+ src/liblzma/common/index_hash.c | 10 +++---
+ src/liblzma/common/stream_buffer_decoder.c | 2 +-
+ src/liblzma/common/stream_buffer_encoder.c | 4 +-
+ src/liblzma/common/stream_decoder.c | 2 +-
+ src/liblzma/common/stream_encoder.c | 2 +-
+ src/liblzma/common/stream_flags_common.c | 2 +-
+ src/liblzma/common/stream_flags_decoder.c | 4 +-
+ src/liblzma/common/stream_flags_encoder.c | 4 +-
+ src/liblzma/common/vli_decoder.c | 2 +-
+ src/liblzma/common/vli_encoder.c | 2 +-
+ src/liblzma/common/vli_size.c | 2 +-
+ src/liblzma/lz/lz_encoder.c | 2 +-
+ src/liblzma/lzma/lzma_encoder.c | 2 +-
+ src/liblzma/lzma/lzma_encoder_presets.c | 2 +-
+ 54 files changed, 177 insertions(+), 176 deletions(-)
+
+commit 8dd7b6052e18621e2e6c62f40f762ee88bd3eb65
+Author: Lasse Collin <lasse.collin@tukaani.org>
+Date: 2009-02-01 22:40:35 +0200
+
+ Fix a bug in lzma_block_buffer_decode(), although this
+ function should be rewritten anyway.
+
+ src/liblzma/common/block_buffer_decoder.c | 8 ++++----
+ 1 files changed, 4 insertions(+), 4 deletions(-)
+
+commit 55fd41431e61fb8178858283d636b6781e33e847
+Author: Lasse Collin <lasse.collin@tukaani.org>
+Date: 2009-02-01 22:39:07 +0200
+
+ Added initial version of raw buffer-to-buffer coding
+ functions, and cleaned up filter.h API header a little.
+ May be very buggy, not tested yet.
+
+ src/liblzma/api/lzma/filter.h | 84 +++++++++++++++++++------
+ src/liblzma/common/Makefile.am | 2 +
+ src/liblzma/common/filter_buffer_decoder.c | 94 ++++++++++++++++++++++++++++
+ src/liblzma/common/filter_buffer_encoder.c | 61 ++++++++++++++++++
+ 4 files changed, 221 insertions(+), 20 deletions(-)
+
+commit 3e54ecee5cad30a5ca361a88a99230407abc0699
+Author: Lasse Collin <lasse.collin@tukaani.org>
+Date: 2009-02-01 00:11:20 +0200
+
+ Fix missing newlines in xzdec.c.
+
+ src/xzdec/xzdec.c | 6 +++---
+ 1 files changed, 3 insertions(+), 3 deletions(-)
+
+commit d64ca34f1b6f34e86adefc7f735b4eff8e6d4a35
+Author: Lasse Collin <lasse.collin@tukaani.org>
+Date: 2009-02-01 00:10:07 +0200
+
+ Use __cdecl also for function pointers in liblzma API when
+ on Windows.
+
+ src/liblzma/api/lzma.h | 18 +++++++++++-------
+ src/liblzma/api/lzma/base.h | 4 ++--
+ src/liblzma/common/common.h | 18 +++++++-----------
+ 3 files changed, 20 insertions(+), 20 deletions(-)
+
+commit 6a2eb54092fc625d59921a607ff68cd1a90aa898
+Author: Lasse Collin <lasse.collin@tukaani.org>
+Date: 2009-01-31 11:01:48 +0200
+
+ Add LZMA_API to liblzma API headers. It's useful at least
+ on Windows. sysdefs.h no longer #includes lzma.h, so lzma.h
+ has to be #included separately where needed.
+
+ src/common/sysdefs.h | 2 -
+ src/liblzma/api/lzma.h | 17 ++++++++++++
+ src/liblzma/api/lzma/base.h | 10 +++---
+ src/liblzma/api/lzma/block.h | 25 ++++++++++--------
+ src/liblzma/api/lzma/check.h | 12 +++++---
+ src/liblzma/api/lzma/container.h | 23 +++++++++--------
+ src/liblzma/api/lzma/filter.h | 24 +++++++++---------
+ src/liblzma/api/lzma/index.h | 47 ++++++++++++++++++++---------------
+ src/liblzma/api/lzma/index_hash.h | 11 ++++---
+ src/liblzma/api/lzma/lzma.h | 8 +++--
+ src/liblzma/api/lzma/stream_flags.h | 10 +++---
+ src/liblzma/api/lzma/version.h | 4 +-
+ src/liblzma/api/lzma/vli.h | 10 +++---
+ src/liblzma/common/common.h | 13 ++++++++-
+ src/xz/private.h | 1 +
+ src/xzdec/xzdec.c | 1 +
+ tests/tests.h | 1 +
+ 17 files changed, 131 insertions(+), 88 deletions(-)
+
+commit d9993fcb4dfc1f93abaf31ae23b3ef1f3123892b
+Author: Lasse Collin <lasse.collin@tukaani.org>
+Date: 2009-01-31 10:13:09 +0200
+
+ Use _WIN32 instead of WIN32 in xzdec.c to test if compiling on Windows.
+
+ src/xzdec/xzdec.c | 4 ++--
+ 1 files changed, 2 insertions(+), 2 deletions(-)
+
+commit 2dbdc5befb33c3703e4609809101047c67caf343
+Author: Lasse Collin <lasse.collin@tukaani.org>
+Date: 2009-01-31 10:02:52 +0200
+
+ Fix two lines in lzma.h on which the # wasn't at the
+ beginning of the line.
+
+ src/liblzma/api/lzma.h | 4 ++--
+ 1 files changed, 2 insertions(+), 2 deletions(-)
+
+commit 4ab760109106dc04f39dd81c97d50f528d1b51c1
+Author: Lasse Collin <lasse.collin@tukaani.org>
+Date: 2009-01-31 09:55:05 +0200
+
+ Add support for using liblzma headers in MSVC, which has no
+ stdint.h or inttypes.h.
+
+ src/liblzma/api/lzma.h | 70 +++++++++++++++++++++++++++++++----------------
+ 1 files changed, 46 insertions(+), 24 deletions(-)
+
+commit b2172cf823d3be34cb0246cb4cb32d105e2a34c9
+Author: Lasse Collin <lasse.collin@tukaani.org>
+Date: 2009-01-31 08:49:54 +0200
+
+ Fix # -> ## in a macro in lzma.h.
+
+ src/liblzma/api/lzma.h | 2 +-
+ 1 files changed, 1 insertions(+), 1 deletions(-)
+
+commit 1aae8698746d3c87a93f8398cdde2de9ba1f7208
+Author: Lasse Collin <lasse.collin@tukaani.org>
+Date: 2009-01-30 18:50:16 +0200
+
+ Updated README.
+
+ README | 30 ++++++++++++++++++++----------
+ 1 files changed, 20 insertions(+), 10 deletions(-)
+
+commit f54bcf6f80d585236bc03ce49f7c73e1abaa17eb
+Author: Lasse Collin <lasse.collin@tukaani.org>
+Date: 2009-01-30 00:29:58 +0200
+
+ Remove dangling crc64_init.c.
+
+ src/liblzma/check/crc64_init.c | 55 ----------------------------------------
+ 1 files changed, 0 insertions(+), 55 deletions(-)
+
+commit 982da7ed314398420c38bf154a8f759d5f18b480
+Author: Lasse Collin <lasse.collin@tukaani.org>
+Date: 2009-01-28 17:16:38 +0200
+
+ The .xz file format specification version 1.0.0 is now
+ officially released. The format has been technically the same
+ since 2008-11-19, but now that it is frozen, people can start
+ using it without a fear that the format will break.
+
+ doc/file-format.txt | 84 +++++++++++++++++++++++++++++---------------------
+ 1 files changed, 49 insertions(+), 35 deletions(-)
+
+commit c4683a660b4372156bdaf92f0cdc54a58f95ee6f
+Author: Lasse Collin <lasse.collin@tukaani.org>
+Date: 2009-01-28 08:45:59 +0200
+
+ Updated THANKS.
+
+ THANKS | 1 +
+ 1 files changed, 1 insertions(+), 0 deletions(-)
+
+commit 3241317093595db9f79104faafe93cb989c9f858
+Author: Lasse Collin <lasse.collin@tukaani.org>
+Date: 2009-01-28 08:43:26 +0200
+
+ Fix uninitialized variables in alone_decoder.c. This bug was
+ triggered by the previous commit, since these variables were
+ not used by anything before support for a preset dictionary.
+
+ src/liblzma/common/alone_decoder.c | 2 ++
+ 1 files changed, 2 insertions(+), 0 deletions(-)
+
+commit f76e39cf930f888d460b443d18f977ebedea8b2a
+Author: Lasse Collin <lasse.collin@tukaani.org>
+Date: 2009-01-27 18:36:05 +0200
+
+ Added initial support for preset dictionary for raw LZMA1
+ and LZMA2. It is not supported by the .xz format or the xz
+ command line tool yet.
+
+ src/liblzma/lz/lz_decoder.c | 35 +++++++++++++++++++++++++----------
+ src/liblzma/lz/lz_decoder.h | 9 ++++++++-
+ src/liblzma/lz/lz_encoder.c | 18 ++++++++++++++++--
+ src/liblzma/lzma/lzma2_decoder.c | 9 ++++++---
+ src/liblzma/lzma/lzma2_encoder.c | 12 +++++++-----
+ src/liblzma/lzma/lzma_decoder.c | 10 ++++++----
+ src/liblzma/lzma/lzma_decoder.h | 2 +-
+ src/liblzma/lzma/lzma_encoder.c | 9 ++++++++-
+ 8 files changed, 77 insertions(+), 27 deletions(-)
+
+commit 449b8c832b26c3633f3bec60095e57d2d3ada1f3
+Author: Lasse Collin <lasse.collin@tukaani.org>
+Date: 2009-01-26 20:09:17 +0200
+
+ Regenerate the CRC tables without trailing blanks.
+
+ src/liblzma/check/crc32_table_be.h | 1008 ++++++++++++++++++------------------
+ src/liblzma/check/crc32_table_le.h | 1008 ++++++++++++++++++------------------
+ src/liblzma/check/crc64_table_be.h | 1016 ++++++++++++++++++------------------
+ src/liblzma/check/crc64_table_le.h | 1016 ++++++++++++++++++------------------
+ 4 files changed, 2024 insertions(+), 2024 deletions(-)
+
+commit 850f7400428dc9c5fd08a2f35a5bd2c9e45aede2
+Author: Jim Meyering <meyering@redhat.com>
+Date: 2009-01-19 21:37:16 +0100
+
+ remove trailing blanks from all but .xz files
+
+ debug/known_sizes.c | 2 +-
+ extra/scanlzma/scanlzma.c | 5 ++---
+ src/liblzma/check/crc32_tablegen.c | 2 +-
+ src/liblzma/check/crc64_tablegen.c | 2 +-
+ src/scripts/lzdiff.1 | 4 ++--
+ src/scripts/lzmore.1 | 6 +++---
+ tests/test_compress.sh | 4 ++--
+ 7 files changed, 12 insertions(+), 13 deletions(-)
+
+commit 667481f1aad34e1ed15738e7913a9c7e256b4cf5
+Author: Lasse Collin <lasse.collin@tukaani.org>
+Date: 2009-01-26 14:34:10 +0200
+
+ Add lzma_block_buffer_decode().
+
+ src/liblzma/api/lzma/block.h | 41 ++++++++++++++
+ src/liblzma/common/Makefile.am | 1 +
+ src/liblzma/common/block_buffer_decoder.c | 87 +++++++++++++++++++++++++++++
+ 3 files changed, 129 insertions(+), 0 deletions(-)
+
+commit 5fb34d8324d3e7e0061df25d0086b64c8726b19d
+Author: Lasse Collin <lasse.collin@tukaani.org>
+Date: 2009-01-26 14:33:28 +0200
+
+ Add more sanity checks to lzma_stream_buffer_decode().
+
+ src/liblzma/common/stream_buffer_decoder.c | 7 +++++++
+ 1 files changed, 7 insertions(+), 0 deletions(-)
+
+commit c129748675a5daa8838df92bde32cc04f6ce61ba
+Author: Lasse Collin <lasse.collin@tukaani.org>
+Date: 2009-01-26 14:33:13 +0200
+
+ Avoid hardcoded constant in easy.c.
+
+ src/liblzma/common/easy.c | 2 +-
+ 1 files changed, 1 insertions(+), 1 deletions(-)
+
+commit 1859d22d75e072463db74c25bc3f5a7992e5fdf6
+Author: Lasse Collin <lasse.collin@tukaani.org>
+Date: 2009-01-26 13:06:49 +0200
+
+ Tiny bit better sanity check in block_util.c
+
+ src/liblzma/common/block_util.c | 2 +-
+ 1 files changed, 1 insertions(+), 1 deletions(-)
+
+commit 2c5fe958e4bbe9b147b10c255955dfe2827fb8e7
+Author: Lasse Collin <lasse.collin@tukaani.org>
+Date: 2009-01-25 01:35:56 +0200
+
+ Fix a dumb bug in Block decoder, which made it return
+ LZMA_DATA_ERROR with valid data. The bug was added in
+ e114502b2bc371e4a45449832cb69be036360722.
+
+ src/liblzma/common/block_decoder.c | 6 +++---
+ 1 files changed, 3 insertions(+), 3 deletions(-)
+
+commit c81f13ff29271de7293f8af3d81848b1dcae3d19
+Author: Lasse Collin <lasse.collin@tukaani.org>
+Date: 2009-01-23 22:27:50 +0200
+
+ Added lzma_stream_buffer_decode() and made minor cleanups.
+
+ src/liblzma/api/lzma/block.h | 3 +-
+ src/liblzma/api/lzma/container.h | 51 +++++++++++++++-
+ src/liblzma/common/Makefile.am | 1 +
+ src/liblzma/common/stream_buffer_decoder.c | 91 ++++++++++++++++++++++++++++
+ 4 files changed, 144 insertions(+), 2 deletions(-)
+
+commit 0b3318661ce749550b8531dfd469639a08930391
+Author: Lasse Collin <lasse.collin@tukaani.org>
+Date: 2009-01-22 12:53:33 +0200
+
+ Fix a comment.
+
+ src/liblzma/common/common.h | 2 +-
+ 1 files changed, 1 insertions(+), 1 deletions(-)
+
+commit 9ec80355a7212a0a2f8c89d98e51b1d8b4e34eec
+Author: Lasse Collin <lasse.collin@tukaani.org>
+Date: 2009-01-20 16:37:27 +0200
+
+ Add some single-call buffer-to-buffer coding functions.
+
+ src/liblzma/api/lzma/block.h | 57 +++++
+ src/liblzma/api/lzma/container.h | 56 +++++
+ src/liblzma/api/lzma/index.h | 70 ++++++-
+ src/liblzma/common/Makefile.am | 2 +
+ src/liblzma/common/block_buffer_encoder.c | 305 ++++++++++++++++++++++++++++
+ src/liblzma/common/index_decoder.c | 83 +++++++--
+ src/liblzma/common/index_encoder.c | 59 +++++-
+ src/liblzma/common/stream_buffer_encoder.c | 138 +++++++++++++
+ tests/test_index.c | 24 +++
+ 9 files changed, 768 insertions(+), 26 deletions(-)
+
+commit d8b58d099340f8f4007b24b211ee41a7210c061c
+Author: Lasse Collin <lasse.collin@tukaani.org>
+Date: 2009-01-20 13:45:41 +0200
+
+ Block encoder cleanups
+
+ src/liblzma/common/block_encoder.c | 28 +++++++---------------------
+ src/liblzma/common/block_encoder.h | 25 +++++++++++++++++++++++++
+ 2 files changed, 32 insertions(+), 21 deletions(-)
+
+commit 0c09810cb3635cb575cb54e694d41523e7d0a335
+Author: Lasse Collin <lasse.collin@tukaani.org>
+Date: 2009-01-20 10:35:15 +0200
+
+ Use LZMA_PROG_ERROR in lzma_code() as documented in base.h.
+
+ src/liblzma/common/common.c | 24 ++++++++----------------
+ 1 files changed, 8 insertions(+), 16 deletions(-)
+
+commit 2f1a8e8eb898f6c036cde55d153ad348bfab3c00
+Author: Lasse Collin <lasse.collin@tukaani.org>
+Date: 2009-01-19 22:53:18 +0200
+
+ Fix handling of non-fatal errors in lzma_code().
+
+ src/liblzma/common/common.c | 9 ++++++++-
+ 1 files changed, 8 insertions(+), 1 deletions(-)
+
+commit 4810b6bc25087be872960b9dd1d11ff07735dc88
+Author: Lasse Collin <lasse.collin@tukaani.org>
+Date: 2009-01-19 14:00:33 +0200
+
+ Move some LZMA2 constants to lzma2_encoder.h so that they
+ can be used outside lzma2_encoder.c.
+
+ src/liblzma/lzma/lzma2_encoder.c | 13 -------------
+ src/liblzma/lzma/lzma2_encoder.h | 14 ++++++++++++++
+ src/liblzma/lzma/lzma_encoder.c | 3 ++-
+ 3 files changed, 16 insertions(+), 14 deletions(-)
+
+commit 00be5d2e09f9c7a6a8563465ad8b8042866817a4
+Author: Lasse Collin <lasse.collin@tukaani.org>
+Date: 2009-01-19 13:52:36 +0200
+
+ Remove dead code.
+
+ src/liblzma/lzma/lzma_encoder.h | 8 --------
+ 1 files changed, 0 insertions(+), 8 deletions(-)
+
+commit 128586213f77c9bd82b7e9a62927f6d0c3769d85
+Author: Lasse Collin <lasse.collin@tukaani.org>
+Date: 2009-01-17 14:24:25 +0200
+
+ Beta was supposed to be API stable but I had forgot to rename
+ lzma_memlimit_encoder and lzma_memlimit_decoder to
+ lzma_raw_encoder_memlimit and lzma_raw_decoder_memlimit. :-(
+ Now it is fixed. Hopefully it doesn't cause too much trouble
+ to those who already thought API is stable.
+
+ src/liblzma/api/lzma/filter.h | 4 ++--
+ src/liblzma/common/easy.c | 4 ++--
+ src/liblzma/common/filter_common.c | 2 +-
+ src/liblzma/common/filter_common.h | 2 +-
+ src/liblzma/common/filter_decoder.c | 4 ++--
+ src/liblzma/common/filter_encoder.c | 4 ++--
+ src/liblzma/common/stream_decoder.c | 2 +-
+ src/xz/process.c | 6 +++---
+ 8 files changed, 14 insertions(+), 14 deletions(-)
+
+commit b056379490be5c584c264a967f0540041a163a1e
+Author: Lasse Collin <lasse.collin@tukaani.org>
+Date: 2009-01-15 14:29:22 +0200
+
+ Updated THANKS.
+
+ THANKS | 1 +
+ 1 files changed, 1 insertions(+), 0 deletions(-)
+
+commit dc8f3be06d54ef6e6cfb5134dd3d25edd08cef89
+Author: Lasse Collin <lasse.collin@tukaani.org>
+Date: 2009-01-15 14:27:32 +0200
+
+ Fixed a bug in 7z2lzma.bash to make it work with .7z files
+ that use something else than 2^n as the dictionary size.
+ Thanks to Dan Shechter for the bug report.
+
+ extra/7z2lzma/7z2lzma.bash | 47 ++++++++++++++++++++++---------------------
+ 1 files changed, 24 insertions(+), 23 deletions(-)
+
+commit 8286a60b8f4bd5accfbc9d229d2204bac31994f2
+Author: Lasse Collin <lasse.collin@tukaani.org>
+Date: 2009-01-07 18:41:15 +0200
+
+ Use pthread_sigmask() instead of sigprocmask() when pthreads
+ are enabled.
+
+ src/common/mythread.h | 6 ++++++
+ src/xz/main.c | 4 ++--
+ src/xz/private.h | 1 +
+ 3 files changed, 9 insertions(+), 2 deletions(-)
+
+commit 4fd43cb3a906f6da2943f69239ee984c4787c9a9
+Author: Lasse Collin <lasse.collin@tukaani.org>
+Date: 2008-12-31 20:01:00 +0200
+
+ Bumped version to 4.999.8beta right after the release
+ of 4.999.7beta.
+
+ configure.ac | 2 +-
+ src/liblzma/api/lzma/version.h | 2 +-
+ 2 files changed, 2 insertions(+), 2 deletions(-)
+
+commit 061748f5932719643cda73383db715167d543c22
+Author: Lasse Collin <lasse.collin@tukaani.org>
+Date: 2008-12-31 18:59:02 +0200
+
+ Disable Subblock filter from test_compress.sh since it is
+ disabled by default in configure.ac.
+
+ tests/test_compress.sh | 22 +++++++++++++---------
+ 1 files changed, 13 insertions(+), 9 deletions(-)
+
+commit 9c45658ddc8bd4a7819ef8547d3e7ccf73203e78
+Author: Lasse Collin <lasse.collin@tukaani.org>
+Date: 2008-12-31 17:44:20 +0200
+
+ Disable both Subblock encoder and decoder my default,
+ since they are not finished and may have security issues too.
+
+ configure.ac | 2 +-
+ 1 files changed, 1 insertions(+), 1 deletions(-)
+
+commit b59f1e98f50694cf6a8f1b342fd878feebdb2f88
+Author: Lasse Collin <lasse.collin@tukaani.org>
+Date: 2008-12-31 17:42:50 +0200
+
+ Update some files in debug directory.
+
+ debug/full_flush.c | 2 --
+ debug/memusage.c | 2 --
+ debug/sync_flush.c | 2 --
+ 3 files changed, 0 insertions(+), 6 deletions(-)
+
+commit d1d17a40d33a9682424ca37282813492f2cba6d0
+Author: Lasse Collin <lasse.collin@tukaani.org>
+Date: 2008-12-31 17:41:46 +0200
+
+ Prepare for 4.999.7beta release.
+
+ AUTHORS | 4 ++--
+ README | 34 +++++++++++++++++-----------------
+ configure.ac | 4 ++--
+ src/liblzma/api/lzma/version.h | 2 +-
+ 4 files changed, 22 insertions(+), 22 deletions(-)
+
+commit 88d3e6b0b18e24142b6d3b41dc1b84b00c49fef3
+Author: Lasse Collin <lasse.collin@tukaani.org>
+Date: 2008-12-31 17:15:03 +0200
+
+ Cleaned up some comments in the API headers.
+
+ src/liblzma/api/lzma/check.h | 23 +++++++++++------------
+ src/liblzma/api/lzma/container.h | 2 +-
+ src/liblzma/api/lzma/version.h | 4 +++-
+ 3 files changed, 15 insertions(+), 14 deletions(-)
+
+commit 322ecf93c961e45a1da8c4a794a7fdacefcd7f40
+Author: Lasse Collin <lasse.collin@tukaani.org>
+Date: 2008-12-31 16:29:39 +0200
+
+ Renamed lzma_options_simple to lzma_options_bcj in the API.
+ The internal implementation is still using the name "simple".
+ It may need some cleanups, so I look at it later.
+
+ src/liblzma/api/Makefile.am | 2 +-
+ src/liblzma/api/lzma.h | 2 +-
+ src/liblzma/api/lzma/bcj.h | 94 +++++++++++++++++++++++++++++++++++
+ src/liblzma/api/lzma/simple.h | 94 -----------------------------------
+ src/liblzma/simple/simple_coder.c | 2 +-
+ src/liblzma/simple/simple_decoder.c | 4 +-
+ src/liblzma/simple/simple_encoder.c | 4 +-
+ tests/test_filter_flags.c | 8 ++--
+ 8 files changed, 105 insertions(+), 105 deletions(-)
+
+commit 7eea8bec3abfed883efba66264a1452a1c04f6b0
+Author: Lasse Collin <lasse.collin@tukaani.org>
+Date: 2008-12-31 00:57:27 +0200
+
+ Fixed missing quoting in configure.ac.
+
+ configure.ac | 38 +++++++++++++++++++-------------------
+ 1 files changed, 19 insertions(+), 19 deletions(-)
+
+commit 28e75f7086dbe9501d926c370375c69dfb1236ce
+Author: Lasse Collin <lasse.collin@tukaani.org>
+Date: 2008-12-31 00:48:23 +0200
+
+ Updated src/liblzma/Makefile.am to use liblzma.pc.in, which
+ should have been in the previous commit.
+
+ src/liblzma/Makefile.am | 4 ++--
+ 1 files changed, 2 insertions(+), 2 deletions(-)
+
+commit 7ed9d943b31d3ee9c5fb2387e84a241ba33afe90
+Author: Lasse Collin <lasse.collin@tukaani.org>
+Date: 2008-12-31 00:30:49 +0200
+
+ Remove lzma_init() and other init functions from liblzma API.
+ Half of developers were already forgetting to use these
+ functions, which could have caused total breakage in some future
+ liblzma version or even now if --enable-small was used. Now
+ liblzma uses pthread_once() to do the initializations unless
+ it has been built with --disable-threads which make these
+ initializations thread-unsafe.
+
+ When --enable-small isn't used, liblzma currently gets needlessly
+ linked against libpthread (on systems that have it). While it is
+ stupid for now, liblzma will need threads in future anyway, so
+ this stupidity will be temporary only.
+
+ When --enable-small is used, different code CRC32 and CRC64 is
+ now used than without --enable-small. This made the resulting
+ binary slightly smaller, but the main reason was to clean it up
+ and to handle the lack of lzma_init_check().
+
+ The pkg-config file lzma.pc was renamed to liblzma.pc. I'm not
+ sure if it works correctly and portably for static linking
+ (Libs.private includes -pthread or other operating system
+ specific flags). Hopefully someone complains if it is bad.
+
+ lzma_rc_prices[] is now included as a precomputed array even
+ with --enable-small. It's just 128 bytes now that it uses uint8_t
+ instead of uint32_t. Smaller array seemed to be at least as fast
+ as the more bloated uint32_t array on x86; hopefully it's not bad
+ on other architectures.
+
+ configure.ac | 29 ++++++++--
+ src/common/mythread.h | 34 +++++++++++
+ src/liblzma/api/Makefile.am | 1 -
+ src/liblzma/api/lzma.h | 1 -
+ src/liblzma/api/lzma/init.h | 85 ----------------------------
+ src/liblzma/check/Makefile.am | 29 +++------
+ src/liblzma/check/check.c | 10 ++--
+ src/liblzma/check/check.h | 25 +++-----
+ src/liblzma/check/check_init.c | 37 ------------
+ src/liblzma/check/crc32.c | 88 -----------------------------
+ src/liblzma/check/crc32_fast.c | 88 +++++++++++++++++++++++++++++
+ src/liblzma/check/crc32_init.c | 55 ------------------
+ src/liblzma/check/crc32_small.c | 54 ++++++++++++++++++
+ src/liblzma/check/crc32_tablegen.c | 55 ++++++++++++++++--
+ src/liblzma/check/crc64.c | 75 ------------------------
+ src/liblzma/check/crc64_fast.c | 75 ++++++++++++++++++++++++
+ src/liblzma/check/crc64_small.c | 54 ++++++++++++++++++
+ src/liblzma/check/crc64_tablegen.c | 55 ++++++++++++++++--
+ src/liblzma/common/Makefile.am | 3 -
+ src/liblzma/common/common.h | 1 +
+ src/liblzma/common/init.c | 39 -------------
+ src/liblzma/common/init_decoder.c | 31 ----------
+ src/liblzma/common/init_encoder.c | 40 -------------
+ src/liblzma/liblzma.pc.in | 12 ++++
+ src/liblzma/lz/lz_encoder.c | 6 ++
+ src/liblzma/lzma.pc.in | 11 ----
+ src/liblzma/rangecoder/Makefile.am | 8 +--
+ src/liblzma/rangecoder/price.h | 16 +-----
+ src/liblzma/rangecoder/price_table.c | 2 +-
+ src/liblzma/rangecoder/price_table_init.c | 55 ------------------
+ src/liblzma/rangecoder/price_tablegen.c | 51 ++++++++++++++--
+ src/xz/Makefile.am | 5 +-
+ src/xz/main.c | 3 -
+ src/xzdec/xzdec.c | 3 -
+ tests/test_block_header.c | 1 -
+ tests/test_check.c | 2 -
+ tests/test_filter_flags.c | 2 -
+ tests/test_index.c | 2 -
+ tests/test_stream_flags.c | 2 -
+ tests/tests.h | 2 +-
+ 40 files changed, 519 insertions(+), 628 deletions(-)
+
+commit 5cda29b5665004fc0f21d0c41d78022a6a559ab2
+Author: Lasse Collin <lasse.collin@tukaani.org>
+Date: 2008-12-27 19:40:31 +0200
+
+ Use 28 MiB as memory usage limit for encoding in test_compress.sh.
+
+ tests/test_compress.sh | 2 +-
+ 1 files changed, 1 insertions(+), 1 deletions(-)
+
+commit 050eb14d29e2537c014662e83599fd8a77f13c45
+Author: Lasse Collin <lasse.collin@tukaani.org>
+Date: 2008-12-27 19:32:20 +0200
+
+ Revert a change made in 3b34851de1eaf358cf9268922fa0eeed8278d680
+ that was related to LZMA_MODE_FAST. The original code is slightly
+ faster although it compresses slightly worse. But since it is fast
+ mode, it is better to select the faster version.
+
+ src/liblzma/lzma/lzma_encoder_optimum_fast.c | 23 ++++++++---------------
+ 1 files changed, 8 insertions(+), 15 deletions(-)
+
+commit 4820f10d0f173864f6a2ea7479663b509ac53358
+Author: Lasse Collin <lasse.collin@tukaani.org>
+Date: 2008-12-27 19:30:19 +0200
+
+ Some xz command line tool improvements.
+
+ src/xz/args.c | 23 ++++-----
+ src/xz/message.c | 4 +-
+ src/xz/options.c | 2 +-
+ src/xz/process.c | 133 ++++++++++++++++++++++++++++++++++++++++++-----------
+ src/xz/process.h | 3 +
+ 5 files changed, 121 insertions(+), 44 deletions(-)
+
+commit e33194e79d8f5ce07cb4aca909b324ae75098f7e
+Author: Lasse Collin <lasse.collin@tukaani.org>
+Date: 2008-12-27 19:27:49 +0200
+
+ Bunch of liblzma tweaks, including some API changes.
+ The API and ABI should now be very close to stable,
+ although the code behind it isn't yet.
+
+ src/liblzma/api/lzma.h | 8 ++--
+ src/liblzma/api/lzma/block.h | 63 +++++++++++++++++++++++-
+ src/liblzma/api/lzma/container.h | 76 ++++++++++++++--------------
+ src/liblzma/api/lzma/lzma.h | 41 +++++++++-------
+ src/liblzma/common/alone_decoder.c | 36 +++++++-------
+ src/liblzma/common/alone_encoder.c | 22 +++-----
+ src/liblzma/common/auto_decoder.c | 2 +-
+ src/liblzma/common/block_decoder.c | 54 ++++++++++----------
+ src/liblzma/common/block_decoder.h | 4 +-
+ src/liblzma/common/block_encoder.c | 37 ++++++++------
+ src/liblzma/common/block_encoder.h | 4 +-
+ src/liblzma/common/block_header_decoder.c | 41 ++++++++-------
+ src/liblzma/common/block_header_encoder.c | 51 +++++++++----------
+ src/liblzma/common/block_util.c | 3 +-
+ src/liblzma/common/easy.c | 45 ++++++-----------
+ src/liblzma/common/stream_decoder.c | 3 +-
+ src/liblzma/common/stream_decoder.h | 2 +-
+ src/liblzma/common/stream_encoder.c | 3 +-
+ src/liblzma/common/stream_encoder.h | 2 +-
+ src/liblzma/common/stream_flags_decoder.c | 2 +-
+ src/liblzma/common/stream_flags_encoder.c | 2 +-
+ src/liblzma/lzma/lzma_encoder.c | 2 +-
+ src/liblzma/lzma/lzma_encoder_presets.c | 53 ++++++--------------
+ 23 files changed, 294 insertions(+), 262 deletions(-)
+
+commit 4d00652e75dd2736aedc3a3a8baff3dd0ea38074
+Author: Lasse Collin <lasse.collin@tukaani.org>
+Date: 2008-12-18 13:42:52 +0200
+
+ Updated Makefile.am that was missing from the previous commit.
+
+ src/liblzma/common/Makefile.am | 1 -
+ 1 files changed, 0 insertions(+), 1 deletions(-)
+
+commit 634636fa56ccee6e744f78b0abed76c8940f2f8f
+Author: Lasse Collin <lasse.collin@tukaani.org>
+Date: 2008-12-17 21:49:53 +0200
+
+ Remove the alignment functions for now. Maybe they will
+ be added back in some form later, but the current version
+ wasn't modular, so it would need fixing anyway.
+
+ src/liblzma/api/Makefile.am | 1 -
+ src/liblzma/api/lzma.h | 1 -
+ src/liblzma/api/lzma/alignment.h | 60 --------------------
+ src/liblzma/common/alignment.c | 114 --------------------------------------
+ 4 files changed, 0 insertions(+), 176 deletions(-)
+
+commit 4fed98417d1687f5eccccb42a133fde3ec81216a
+Author: Lasse Collin <lasse.collin@tukaani.org>
+Date: 2008-12-17 20:11:23 +0200
+
+ xz message handling improvements
+
+ src/xz/message.c | 125 +++++++++++++++++++++++++++++++++++++++++++++++++-----
+ src/xz/message.h | 7 +++-
+ src/xz/process.c | 28 +++++++++++-
+ 3 files changed, 146 insertions(+), 14 deletions(-)
+
+commit 653e457e3756ef35e5d1b2be3523b3e4b1e9ee4d
+Author: Lasse Collin <lasse.collin@tukaani.org>
+Date: 2008-12-15 23:26:43 +0200
+
+ Fix a dumb bug in .lzma decoder which was introduced in
+ the previous commit. (Probably the previous commit has
+ other bugs too, it wasn't tested.)
+
+ src/liblzma/common/alone_decoder.c | 29 ++++++++++++++---------------
+ 1 files changed, 14 insertions(+), 15 deletions(-)
+
+commit 671a5adf1e844bfdd6fd327016c3c28694493158
+Author: Lasse Collin <lasse.collin@tukaani.org>
+Date: 2008-12-15 19:39:13 +0200
+
+ Bunch of liblzma API cleanups and fixes.
+
+ src/liblzma/api/lzma.h | 122 +++++++++++---------
+ src/liblzma/api/lzma/base.h | 174 +++++++++++++++++++----------
+ src/liblzma/api/lzma/block.h | 211 +++++++++++++++++++++++------------
+ src/liblzma/api/lzma/check.h | 28 +++--
+ src/liblzma/api/lzma/container.h | 155 +++++++++++++-------------
+ src/liblzma/api/lzma/delta.h | 12 +-
+ src/liblzma/api/lzma/filter.h | 27 +++--
+ src/liblzma/api/lzma/index.h | 97 ++++++++++++++---
+ src/liblzma/api/lzma/index_hash.h | 26 +++-
+ src/liblzma/api/lzma/init.h | 2 +-
+ src/liblzma/api/lzma/lzma.h | 12 +-
+ src/liblzma/api/lzma/simple.h | 4 +-
+ src/liblzma/api/lzma/stream_flags.h | 46 +++++---
+ src/liblzma/api/lzma/version.h | 6 +-
+ src/liblzma/api/lzma/vli.h | 17 +--
+ src/liblzma/common/alone_decoder.c | 47 ++++++---
+ src/liblzma/common/auto_decoder.c | 29 +++++
+ src/liblzma/common/block_util.c | 52 +++++----
+ src/liblzma/common/common.c | 58 ++++++++++
+ src/liblzma/common/common.h | 9 ++-
+ src/liblzma/common/easy.c | 33 ++++--
+ src/liblzma/common/filter_common.c | 2 +-
+ src/liblzma/common/index.c | 11 ++
+ src/liblzma/common/index_decoder.c | 46 +++++++-
+ src/liblzma/common/stream_decoder.c | 47 +++++++-
+ src/liblzma/lzma/lzma2_encoder.c | 6 +-
+ tests/test_index.c | 10 +-
+ 27 files changed, 863 insertions(+), 426 deletions(-)
+
+commit 17781c2c20fd77029cb32e77792889f2f211d69d
+Author: Lasse Collin <lasse.collin@tukaani.org>
+Date: 2008-12-15 14:26:52 +0200
+
+ The LZMA2 decoder fix introduced a bug to LZ decoder,
+ which made LZ decoder return too early after dictionary
+ reset. This fixes it.
+
+ src/liblzma/lz/lz_decoder.c | 33 +++++++++++++++++++++++----------
+ 1 files changed, 23 insertions(+), 10 deletions(-)
+
+commit f9f2d1e74398500724041f7fb3c38db35ad8c8d8
+Author: Lasse Collin <lasse.collin@tukaani.org>
+Date: 2008-12-15 11:20:22 +0200
+
+ Added two new test files.
+
+ tests/files/README | 7 +++++++
+ tests/files/bad-1-lzma2-8.xz | Bin 0 -> 464 bytes
+ tests/files/good-1-lzma2-4.xz | Bin 0 -> 464 bytes
+ 3 files changed, 7 insertions(+), 0 deletions(-)
+
+commit ff7fb2c605bccc411069e07b9f11fb957aea2ddf
+Author: Lasse Collin <lasse.collin@tukaani.org>
+Date: 2008-12-15 10:01:59 +0200
+
+ Fix data corruption in LZMA2 decoder.
+
+ src/liblzma/lz/lz_decoder.c | 17 ++++++++++++++++-
+ src/liblzma/lz/lz_decoder.h | 8 +++++---
+ src/liblzma/lzma/lzma2_decoder.c | 15 +++++++++++----
+ 3 files changed, 32 insertions(+), 8 deletions(-)
+
+commit 1ceebcf7e1bd30b95125f0ad67a09fdb6215d613
+Author: Lasse Collin <lasse.collin@tukaani.org>
+Date: 2008-12-13 00:54:11 +0200
+
+ Name the package "xz" in configure.ac.
+
+ configure.ac | 11 ++++-------
+ 1 files changed, 4 insertions(+), 7 deletions(-)
+
+commit a94bf00d0af9b423851905b031be5a645a657820
+Author: Lasse Collin <lasse.collin@tukaani.org>
+Date: 2008-12-12 22:43:21 +0200
+
+ Some adjustments to GCC warning flags. The important change
+ is the removal of -pedantic. It messes up -Werror (which I
+ really want to keep so that I don't miss any warnings) with
+ printf format strings that are in POSIX but not in C99.
+
+ configure.ac | 8 +++++---
+ 1 files changed, 5 insertions(+), 3 deletions(-)
+
+commit 8582d392baacd2cdac07ca60041f8c661323676d
+Author: Lasse Collin <lasse.collin@tukaani.org>
+Date: 2008-12-10 01:31:00 +0200
+
+ Remove obsolete comment.
+
+ src/xz/message.c | 1 -
+ 1 files changed, 0 insertions(+), 1 deletions(-)
+
+commit b1ae6dd731ea3636c3c2bfc7aefa71457d3328f1
+Author: Lasse Collin <lasse.collin@tukaani.org>
+Date: 2008-12-10 01:27:15 +0200
+
+ Use "decompression" consistently in --long-help.
+
+ src/xz/message.c | 2 +-
+ 1 files changed, 1 insertions(+), 1 deletions(-)
+
+commit 1ea9e7f15afd5d3981e2432710e932320597bca9
+Author: Lasse Collin <lasse.collin@tukaani.org>
+Date: 2008-12-10 01:23:58 +0200
+
+ Added preset=NUM to --lzma1 and --lzma2. This makes it easy
+ to take a preset as a template and modify it a little.
+
+ src/xz/message.c | 1 +
+ src/xz/options.c | 8 ++++++++
+ 2 files changed, 9 insertions(+), 0 deletions(-)
+
+commit bceb3918dbb21f34976bfdd4c171a81319de71f7
+Author: Lasse Collin <lasse.collin@tukaani.org>
+Date: 2008-12-09 17:43:31 +0200
+
+ Put the file format specification into the public domain.
+ Same will be done to the actual code later.
+
+ doc/file-format.txt | 24 +++++++++---------------
+ 1 files changed, 9 insertions(+), 15 deletions(-)
+
+commit 6efa2d80d46a38861016f41f0eb6fa2ec9260fe6
+Author: Lasse Collin <lasse.collin@tukaani.org>
+Date: 2008-12-09 17:41:49 +0200
+
+ Make the memusage functions of LZMA1 and LZMA2 encoders
+ to validate the filter options. Add missing validation
+ to LZMA2 encoder when options are changed in the middle
+ of encoding.
+
+ src/liblzma/lzma/lzma2_encoder.c | 5 +++-
+ src/liblzma/lzma/lzma_encoder.c | 44 +++++++++++++++++++++++++------------
+ src/liblzma/lzma/lzma_encoder.h | 2 +-
+ 3 files changed, 35 insertions(+), 16 deletions(-)
+
+commit f20a03206b71ff01b827bb7a932411d6a6a4e06a
+Author: Lasse Collin <lasse.collin@tukaani.org>
+Date: 2008-12-09 10:36:24 +0200
+
+ Updated THANKS.
+
+ THANKS | 1 +
+ 1 files changed, 1 insertions(+), 0 deletions(-)
+
+commit ef7890d56453dca1aeb2e12db29b7e418d93dde4
+Author: Lasse Collin <lasse.collin@tukaani.org>
+Date: 2008-12-01 23:04:12 +0200
+
+ In command line tool, take advantage of memusage calculation's
+ ability to also validate the filter chain and options (not
+ implemented yet for all filters).
+
+ src/xz/process.c | 8 ++++----
+ 1 files changed, 4 insertions(+), 4 deletions(-)
+
+commit ccd57afa09e332d664d6d6a7498702791ea5f659
+Author: Lasse Collin <lasse.collin@tukaani.org>
+Date: 2008-12-01 22:59:28 +0200
+
+ Validate the filter chain before checking filter-specific
+ memory usage.
+
+ src/liblzma/common/filter_common.c | 14 ++++++++++----
+ 1 files changed, 10 insertions(+), 4 deletions(-)
+
+commit c596fda40b62fe1683d0ac34d0c673dcaae2aa15
+Author: Lasse Collin <lasse.collin@tukaani.org>
+Date: 2008-12-01 22:58:22 +0200
+
+ Make the memusage functions of LZMA1 and LZMA2 decoders
+ to validate the filter options.
+
+ src/liblzma/lzma/lzma2_decoder.c | 7 ++-----
+ src/liblzma/lzma/lzma_decoder.c | 14 ++++++++++----
+ src/liblzma/lzma/lzma_decoder.h | 5 +++++
+ 3 files changed, 17 insertions(+), 9 deletions(-)
+
+commit c58f469be5bb9b0bdab825c6687445fd553f4f3a
+Author: Lasse Collin <lasse.collin@tukaani.org>
+Date: 2008-12-01 22:55:18 +0200
+
+ Added the changes for Delta filter that should have been
+ part of 656ec87882ee74b192c4ea4a233a235eca7b04d4.
+
+ src/liblzma/common/filter_decoder.c | 2 +-
+ src/liblzma/common/filter_encoder.c | 2 +-
+ 2 files changed, 2 insertions(+), 2 deletions(-)
+
+commit cd708015202dbf7585b84a8781462a20c42a324b
+Author: Lasse Collin <lasse.collin@tukaani.org>
+Date: 2008-12-01 22:50:28 +0200
+
+ LZMA2 decoder cleanups. Make it require new LZMA properties
+ also in the first LZMA chunk after a dictionary reset in
+ uncompressed chunk.
+
+ src/liblzma/lzma/lzma2_decoder.c | 95 ++++++++++++++++---------------------
+ 1 files changed, 41 insertions(+), 54 deletions(-)
+
+commit 656ec87882ee74b192c4ea4a233a235eca7b04d4
+Author: Lasse Collin <lasse.collin@tukaani.org>
+Date: 2008-12-01 16:30:11 +0200
+
+ Added lzma_delta_coder_memusage() which also validates
+ the options.
+
+ src/liblzma/delta/Makefile.am | 3 +-
+ src/liblzma/delta/delta_common.c | 28 +++++++++++++++++------
+ src/liblzma/delta/delta_common.h | 19 +---------------
+ src/liblzma/delta/delta_decoder.c | 2 +-
+ src/liblzma/delta/delta_decoder.h | 2 +-
+ src/liblzma/delta/delta_encoder.c | 14 +++--------
+ src/liblzma/delta/delta_encoder.h | 2 +-
+ src/liblzma/delta/delta_private.h | 44 +++++++++++++++++++++++++++++++++++++
+ 8 files changed, 75 insertions(+), 39 deletions(-)
+
+commit 691a9155b7a28882baf37e9d1e969e32e91dbc7a
+Author: Lasse Collin <lasse.collin@tukaani.org>
+Date: 2008-11-29 10:03:49 +0200
+
+ Automake includes the m4 directory, so don't add it in
+ Makefile.am separately.
+
+ Updated THANKS.
+
+ Makefile.am | 1 -
+ THANKS | 1 +
+ 2 files changed, 1 insertions(+), 1 deletions(-)
+
+commit c7007ddf06ac2b0e018d71d281c21b99f16e7ae0
+Author: Lasse Collin <lasse.collin@tukaani.org>
+Date: 2008-11-28 12:00:48 +0200
+
+ Tested using COLUMNS environment variable to avoid broken
+ progress indicator but since COLUMNS isn't usually available,
+ the code was left commented out.
+
+ src/xz/message.c | 14 +++++++++-----
+ 1 files changed, 9 insertions(+), 5 deletions(-)
+
+commit ae65dcfde27014e4d811e1a1308aa5d0fe8debbd
+Author: Lasse Collin <lasse.collin@tukaani.org>
+Date: 2008-11-27 19:28:59 +0200
+
+ Cleanups to message.c.
+
+ src/xz/message.c | 47 ++++++++++++++++++-----------------------------
+ 1 files changed, 18 insertions(+), 29 deletions(-)
+
+commit a8368b75cdcd5427299001cc42839287f27b244d
+Author: Lasse Collin <lasse.collin@tukaani.org>
+Date: 2008-11-25 02:37:47 +0200
+
+ Remove the nowadays unneeded memory limitting malloc() wrapper.
+
+ src/liblzma/api/Makefile.am | 1 -
+ src/liblzma/api/lzma.h | 1 -
+ src/liblzma/api/lzma/memlimit.h | 207 -------------------------
+ src/liblzma/common/Makefile.am | 1 -
+ src/liblzma/common/memory_limiter.c | 288 -----------------------------------
+ tests/Makefile.am | 2 -
+ tests/test_memlimit.c | 114 --------------
+ 7 files changed, 0 insertions(+), 614 deletions(-)
+
+commit 69472ee5f055a2bb6f28106f0923e1461fd1d080
+Author: Lasse Collin <lasse.collin@tukaani.org>
+Date: 2008-11-23 15:09:03 +0200
+
+ VLI encoder and decoder cleanups. Made encoder return
+ LZMA_PROG_ERROR in single-call mode if there's no output
+ space.
+
+ src/liblzma/common/vli_decoder.c | 15 +++++++++------
+ src/liblzma/common/vli_encoder.c | 31 ++++++++++++++++++++++++-------
+ 2 files changed, 33 insertions(+), 13 deletions(-)
+
+commit 4249c8c15a08f55b51b7012e6aaafce3aa9eb650
+Author: Lasse Collin <lasse.collin@tukaani.org>
+Date: 2008-11-22 17:44:33 +0200
+
+ Typo fix
+
+ src/xz/process.c | 2 +-
+ 1 files changed, 1 insertions(+), 1 deletions(-)
+
+commit 6d1d6f4598d121253dbe1084c6866b66e95c361b
+Author: Lasse Collin <lasse.collin@tukaani.org>
+Date: 2008-11-20 22:59:10 +0200
+
+ Support NetBSD's errno for O_NOFOLLOW.
+
+ src/xz/io.c | 8 ++++++++
+ 1 files changed, 8 insertions(+), 0 deletions(-)
+
+commit f901a290eef67b8ea4720ccdf5f46edf775ed9d7
+Author: Lasse Collin <lasse.collin@tukaani.org>
+Date: 2008-11-20 18:05:52 +0200
+
+ Build xzdec and lzmadec from xzdec.c. xzdec supports only .xz
+ files and lzmadec only .lzma files.
+
+ src/xzdec/Makefile.am | 7 +-
+ src/xzdec/xzdec.c | 311 +++++++++++++++++++++----------------------------
+ 2 files changed, 140 insertions(+), 178 deletions(-)
+
+commit 86a0ed8f01c8ed44721223f885e679c71b7bb94c
+Author: Lasse Collin <lasse.collin@tukaani.org>
+Date: 2008-11-20 11:01:29 +0200
+
+ Minor cleanups to xzdec.
+
+ src/xzdec/xzdec.c | 20 ++++++++++----------
+ 1 files changed, 10 insertions(+), 10 deletions(-)
+
+commit 54f716ba8905d09752dcd1519455a40bd21d5317
+Author: Lasse Collin <lasse.collin@tukaani.org>
+Date: 2008-11-19 23:55:22 +0200
+
+ Added missing check for uint16_t.
+
+ configure.ac | 1 +
+ 1 files changed, 1 insertions(+), 0 deletions(-)
+
+commit 1880a3927b23f265f63b2adb86fbdb81ea09eb06
+Author: Lasse Collin <lasse.collin@tukaani.org>
+Date: 2008-11-19 23:52:24 +0200
+
+ Renamed lzma to xz and lzmadec to xzdec. We create symlinks
+ lzma, unlzma, and lzcat in "make install" for backwards
+ compatibility with LZMA Utils 4.32.x; I'm not sure if this
+ should be the default though.
+
+ configure.ac | 4 +-
+ po/POTFILES.in | 21 +-
+ src/Makefile.am | 2 +-
+ src/lzma/Makefile.am | 72 ----
+ src/lzma/args.c | 500 --------------------------
+ src/lzma/args.h | 56 ---
+ src/lzma/hardware.c | 122 -------
+ src/lzma/hardware.h | 45 ---
+ src/lzma/io.c | 658 ----------------------------------
+ src/lzma/io.h | 97 -----
+ src/lzma/list.c | 477 -------------------------
+ src/lzma/main.c | 402 ---------------------
+ src/lzma/main.h | 60 ----
+ src/lzma/message.c | 892 -----------------------------------------------
+ src/lzma/message.h | 132 -------
+ src/lzma/options.c | 352 -------------------
+ src/lzma/options.h | 46 ---
+ src/lzma/private.h | 52 ---
+ src/lzma/process.c | 391 ---------------------
+ src/lzma/process.h | 70 ----
+ src/lzma/suffix.c | 213 -----------
+ src/lzma/suffix.h | 40 ---
+ src/lzma/util.c | 199 -----------
+ src/lzma/util.h | 71 ----
+ src/lzmadec/Makefile.am | 29 --
+ src/lzmadec/lzmadec.c | 492 --------------------------
+ src/xz/Makefile.am | 74 ++++
+ src/xz/args.c | 500 ++++++++++++++++++++++++++
+ src/xz/args.h | 56 +++
+ src/xz/hardware.c | 122 +++++++
+ src/xz/hardware.h | 45 +++
+ src/xz/io.c | 658 ++++++++++++++++++++++++++++++++++
+ src/xz/io.h | 97 +++++
+ src/xz/list.c | 477 +++++++++++++++++++++++++
+ src/xz/main.c | 402 +++++++++++++++++++++
+ src/xz/main.h | 60 ++++
+ src/xz/message.c | 892 +++++++++++++++++++++++++++++++++++++++++++++++
+ src/xz/message.h | 132 +++++++
+ src/xz/options.c | 352 +++++++++++++++++++
+ src/xz/options.h | 46 +++
+ src/xz/private.h | 52 +++
+ src/xz/process.c | 391 +++++++++++++++++++++
+ src/xz/process.h | 70 ++++
+ src/xz/suffix.c | 213 +++++++++++
+ src/xz/suffix.h | 40 +++
+ src/xz/util.c | 199 +++++++++++
+ src/xz/util.h | 71 ++++
+ src/xzdec/Makefile.am | 29 ++
+ src/xzdec/xzdec.c | 492 ++++++++++++++++++++++++++
+ tests/test_compress.sh | 29 +-
+ tests/test_files.sh | 4 +-
+ 51 files changed, 5498 insertions(+), 5500 deletions(-)
+
+commit e114502b2bc371e4a45449832cb69be036360722
+Author: Lasse Collin <lasse.collin@tukaani.org>
+Date: 2008-11-19 20:46:52 +0200
+
+ Oh well, big messy commit again. Some highlights:
+ - Updated to the latest, probably final file format version.
+ - Command line tool reworked to not use threads anymore.
+ Threading will probably go into liblzma anyway.
+ - Memory usage limit is now about 30 % for uncompression
+ and about 90 % for compression.
+ - Progress indicator with --verbose
+ - Simplified --help and full --long-help
+ - Upgraded to the last LGPLv2.1+ getopt_long from gnulib.
+ - Some bug fixes
+
+ THANKS | 1 +
+ configure.ac | 48 +-
+ debug/full_flush.c | 6 +-
+ debug/known_sizes.c | 2 +-
+ debug/memusage.c | 2 +-
+ debug/sync_flush.c | 10 +-
+ doc/file-format.txt | 260 +++++----
+ lib/Makefile.am | 10 +-
+ lib/getopt.c | 14 +-
+ lib/getopt.in.h | 226 +++++++
+ lib/getopt1.c | 8 +-
+ lib/getopt_.h | 226 -------
+ lib/gettext.h | 240 -------
+ m4/getopt.m4 | 64 +--
+ src/common/bswap.h | 15 +-
+ src/common/physmem.h | 4 +
+ src/common/sysdefs.h | 12 +-
+ src/liblzma/api/lzma/block.h | 47 +-
+ src/liblzma/api/lzma/filter.h | 8 +
+ src/liblzma/api/lzma/index.h | 20 +-
+ src/liblzma/api/lzma/index_hash.h | 4 +-
+ src/liblzma/common/block_decoder.c | 59 +-
+ src/liblzma/common/block_encoder.c | 41 +-
+ src/liblzma/common/block_header_decoder.c | 31 +-
+ src/liblzma/common/block_header_encoder.c | 69 +--
+ src/liblzma/common/block_util.c | 45 +-
+ src/liblzma/common/common.h | 8 -
+ src/liblzma/common/filter_common.c | 4 +-
+ src/liblzma/common/index.c | 259 ++++----
+ src/liblzma/common/index.h | 33 +-
+ src/liblzma/common/index_decoder.c | 31 +-
+ src/liblzma/common/index_encoder.c | 16 +-
+ src/liblzma/common/index_hash.c | 68 +-
+ src/liblzma/common/stream_decoder.c | 9 +-
+ src/liblzma/common/stream_encoder.c | 6 +-
+ src/liblzma/lz/lz_decoder.h | 4 +-
+ src/liblzma/subblock/subblock_decoder.c | 3 +-
+ src/lzma/Makefile.am | 9 +-
+ src/lzma/alloc.c | 106 ---
+ src/lzma/alloc.h | 42 --
+ src/lzma/args.c | 531 +++++++---------
+ src/lzma/args.h | 42 +-
+ src/lzma/error.c | 162 -----
+ src/lzma/error.h | 67 --
+ src/lzma/hardware.c | 75 ++-
+ src/lzma/hardware.h | 16 +-
+ src/lzma/help.c | 170 -----
+ src/lzma/help.h | 32 -
+ src/lzma/io.c | 757 +++++++++++-----------
+ src/lzma/io.h | 51 ++-
+ src/lzma/main.c | 392 ++++++++----
+ src/lzma/main.h | 60 ++
+ src/lzma/message.c | 892 ++++++++++++++++++++++++++
+ src/lzma/message.h | 132 ++++
+ src/lzma/options.c | 42 +-
+ src/lzma/options.h | 6 +-
+ src/lzma/private.h | 28 +-
+ src/lzma/process.c | 525 +++++++--------
+ src/lzma/process.h | 40 ++
+ src/lzma/suffix.c | 52 +-
+ src/lzma/suffix.h | 17 +-
+ src/lzma/util.c | 100 ++--
+ src/lzma/util.h | 43 ++-
+ src/lzmadec/lzmadec.c | 36 +-
+ tests/files/README | 12 +-
+ tests/files/bad-1-block_header-1.xz | Bin 64 -> 64 bytes
+ tests/files/bad-1-block_header-2.xz | Bin 64 -> 64 bytes
+ tests/files/bad-1-block_header-3.xz | Bin 68 -> 68 bytes
+ tests/files/bad-1-block_header-4.xz | Bin 72 -> 76 bytes
+ tests/files/bad-1-block_header-5.xz | Bin 0 -> 72 bytes
+ tests/files/bad-1-check-crc32.xz | Bin 68 -> 68 bytes
+ tests/files/bad-1-check-crc64.xz | Bin 72 -> 72 bytes
+ tests/files/bad-1-check-sha256.xz | Bin 96 -> 96 bytes
+ tests/files/bad-1-lzma2-1.xz | Bin 64 -> 64 bytes
+ tests/files/bad-1-lzma2-2.xz | Bin 424 -> 424 bytes
+ tests/files/bad-1-lzma2-3.xz | Bin 424 -> 424 bytes
+ tests/files/bad-1-lzma2-4.xz | Bin 408 -> 408 bytes
+ tests/files/bad-1-lzma2-5.xz | Bin 408 -> 408 bytes
+ tests/files/bad-1-lzma2-6.xz | Bin 68 -> 68 bytes
+ tests/files/bad-1-lzma2-7.xz | Bin 408 -> 408 bytes
+ tests/files/bad-1-stream_flags-1.xz | Bin 68 -> 68 bytes
+ tests/files/bad-1-stream_flags-2.xz | Bin 68 -> 68 bytes
+ tests/files/bad-1-stream_flags-3.xz | Bin 68 -> 68 bytes
+ tests/files/bad-1-vli-1.xz | Bin 72 -> 72 bytes
+ tests/files/bad-1-vli-2.xz | Bin 72 -> 76 bytes
+ tests/files/bad-2-compressed_data_padding.xz | Bin 92 -> 92 bytes
+ tests/files/bad-2-index-1.xz | Bin 92 -> 92 bytes
+ tests/files/bad-2-index-2.xz | Bin 92 -> 92 bytes
+ tests/files/bad-2-index-3.xz | Bin 92 -> 92 bytes
+ tests/files/bad-2-index-4.xz | Bin 92 -> 92 bytes
+ tests/files/bad-2-index-5.xz | Bin 0 -> 92 bytes
+ tests/files/good-1-3delta-lzma2.xz | Bin 528 -> 528 bytes
+ tests/files/good-1-block_header-1.xz | Bin 72 -> 72 bytes
+ tests/files/good-1-block_header-2.xz | Bin 68 -> 68 bytes
+ tests/files/good-1-block_header-3.xz | Bin 68 -> 68 bytes
+ tests/files/good-1-check-crc32.xz | Bin 68 -> 68 bytes
+ tests/files/good-1-check-crc64.xz | Bin 72 -> 72 bytes
+ tests/files/good-1-check-none.xz | Bin 64 -> 64 bytes
+ tests/files/good-1-check-sha256.xz | Bin 96 -> 96 bytes
+ tests/files/good-1-delta-lzma2.tiff.xz | Bin 51312 -> 51316 bytes
+ tests/files/good-1-lzma2-1.xz | Bin 424 -> 424 bytes
+ tests/files/good-1-lzma2-2.xz | Bin 424 -> 424 bytes
+ tests/files/good-1-lzma2-3.xz | Bin 408 -> 408 bytes
+ tests/files/good-1-sparc-lzma2.xz | Bin 2292 -> 2296 bytes
+ tests/files/good-1-x86-lzma2.xz | Bin 1936 -> 1936 bytes
+ tests/files/good-2-lzma2.xz | Bin 92 -> 92 bytes
+ tests/files/unsupported-block_header.xz | Bin 68 -> 68 bytes
+ tests/files/unsupported-check.xz | Bin 68 -> 68 bytes
+ tests/files/unsupported-filter_flags-1.xz | Bin 68 -> 68 bytes
+ tests/files/unsupported-filter_flags-2.xz | Bin 68 -> 68 bytes
+ tests/files/unsupported-filter_flags-3.xz | Bin 68 -> 68 bytes
+ tests/test_block_header.c | 16 +-
+ tests/test_index.c | 42 +-
+ 113 files changed, 3462 insertions(+), 2946 deletions(-)
+
+commit 3c3905b53462ae235c9438d86a4dc51086410932
+Author: Lasse Collin <lasse.collin@tukaani.org>
+Date: 2008-10-09 11:12:29 +0300
+
+ Fixed the test that should have been fixed as part
+ of 1e8e4fd1f3e50129b4541406ad765d2aa1233943.
+
+ tests/test_block_header.c | 2 +-
+ 1 files changed, 1 insertions(+), 1 deletions(-)
+
+commit 0f295bf7a3ece01f667caae318cc3e3424085886
+Author: Lasse Collin <lasse.collin@tukaani.org>
+Date: 2008-10-07 16:42:18 +0300
+
+ Fixed some help messages.
+
+ src/lzma/help.c | 6 +++---
+ 1 files changed, 3 insertions(+), 3 deletions(-)
+
+commit 1e8e4fd1f3e50129b4541406ad765d2aa1233943
+Author: Lasse Collin <lasse.collin@tukaani.org>
+Date: 2008-10-07 09:40:31 +0300
+
+ Made the preset numbering more logical in liblzma API.
+
+ src/liblzma/api/lzma/container.h | 20 ++++++++++----------
+ src/liblzma/api/lzma/lzma.h | 2 +-
+ src/liblzma/lzma/lzma_encoder_presets.c | 3 ++-
+ src/lzma/args.c | 8 ++++----
+ src/lzma/args.h | 2 +-
+ 5 files changed, 18 insertions(+), 17 deletions(-)
+
+commit 5e4df4c3c09c82bbbb1a916784e3dc717ca4ff81
+Author: Lasse Collin <lasse.collin@tukaani.org>
+Date: 2008-10-03 19:36:09 +0300
+
+ Removed fi from po/LINGUAS.
+
+ po/LINGUAS | 1 -
+ 1 files changed, 0 insertions(+), 1 deletions(-)
+
+commit fcfb86c7770328cfffa2e83b176af9a1ba2d9128
+Author: Lasse Collin <lasse.collin@tukaani.org>
+Date: 2008-10-03 07:06:48 +0300
+
+ Fixed suffix handling with --format=raw.
+
+ src/lzma/suffix.c | 28 +++++++++++++++++++---------
+ 1 files changed, 19 insertions(+), 9 deletions(-)
+
+commit bd137524f2f50e30ba054f42f1f6536cd3cee920
+Author: Lasse Collin <lasse.collin@tukaani.org>
+Date: 2008-10-02 22:51:46 +0300
+
+ Initial changes to change the suffix of the new format to .xz.
+ This also fixes a bug related to --suffix option. Some issues
+ with suffixes with --format=raw were not fixed.
+
+ src/lzma/args.c | 67 ++++++++++++++++++++++++++++++-------------
+ src/lzma/args.h | 13 ++++----
+ src/lzma/help.c | 4 +-
+ src/lzma/process.c | 24 +++++++++------
+ src/lzma/suffix.c | 74 +++++++++++++++++++++++++++++++++++++++--------
+ tests/test_compress.sh | 3 +-
+ 6 files changed, 133 insertions(+), 52 deletions(-)
+
+commit 4c321a41c482821aa3c4d64cdf886a6ed904d844
+Author: Lasse Collin <lasse.collin@tukaani.org>
+Date: 2008-09-30 17:43:55 +0300
+
+ Renamed the test files from .lzma suffix to .xz suffix.
+
+ tests/files/README | 128 ++++++++++++------------
+ tests/files/bad-0-backward_size.lzma | Bin 32 -> 0 bytes
+ tests/files/bad-0-backward_size.xz | Bin 0 -> 32 bytes
+ tests/files/bad-0-empty-truncated.lzma | Bin 31 -> 0 bytes
+ tests/files/bad-0-empty-truncated.xz | Bin 0 -> 31 bytes
+ tests/files/bad-0-footer_magic.lzma | Bin 32 -> 0 bytes
+ tests/files/bad-0-footer_magic.xz | Bin 0 -> 32 bytes
+ tests/files/bad-0-header_magic.lzma | Bin 32 -> 0 bytes
+ tests/files/bad-0-header_magic.xz | Bin 0 -> 32 bytes
+ tests/files/bad-0-nonempty_index.lzma | Bin 32 -> 0 bytes
+ tests/files/bad-0-nonempty_index.xz | Bin 0 -> 32 bytes
+ tests/files/bad-0cat-alone.lzma | Bin 55 -> 0 bytes
+ tests/files/bad-0cat-alone.xz | Bin 0 -> 55 bytes
+ tests/files/bad-0cat-header_magic.lzma | Bin 64 -> 0 bytes
+ tests/files/bad-0cat-header_magic.xz | Bin 0 -> 64 bytes
+ tests/files/bad-0catpad-empty.lzma | Bin 69 -> 0 bytes
+ tests/files/bad-0catpad-empty.xz | Bin 0 -> 69 bytes
+ tests/files/bad-0pad-empty.lzma | Bin 37 -> 0 bytes
+ tests/files/bad-0pad-empty.xz | Bin 0 -> 37 bytes
+ tests/files/bad-1-block_header-1.lzma | Bin 64 -> 0 bytes
+ tests/files/bad-1-block_header-1.xz | Bin 0 -> 64 bytes
+ tests/files/bad-1-block_header-2.lzma | Bin 64 -> 0 bytes
+ tests/files/bad-1-block_header-2.xz | Bin 0 -> 64 bytes
+ tests/files/bad-1-block_header-3.lzma | Bin 68 -> 0 bytes
+ tests/files/bad-1-block_header-3.xz | Bin 0 -> 68 bytes
+ tests/files/bad-1-block_header-4.lzma | Bin 72 -> 0 bytes
+ tests/files/bad-1-block_header-4.xz | Bin 0 -> 72 bytes
+ tests/files/bad-1-check-crc32.lzma | Bin 68 -> 0 bytes
+ tests/files/bad-1-check-crc32.xz | Bin 0 -> 68 bytes
+ tests/files/bad-1-check-crc64.lzma | Bin 72 -> 0 bytes
+ tests/files/bad-1-check-crc64.xz | Bin 0 -> 72 bytes
+ tests/files/bad-1-check-sha256.lzma | Bin 96 -> 0 bytes
+ tests/files/bad-1-check-sha256.xz | Bin 0 -> 96 bytes
+ tests/files/bad-1-lzma2-1.lzma | Bin 64 -> 0 bytes
+ tests/files/bad-1-lzma2-1.xz | Bin 0 -> 64 bytes
+ tests/files/bad-1-lzma2-2.lzma | Bin 424 -> 0 bytes
+ tests/files/bad-1-lzma2-2.xz | Bin 0 -> 424 bytes
+ tests/files/bad-1-lzma2-3.lzma | Bin 424 -> 0 bytes
+ tests/files/bad-1-lzma2-3.xz | Bin 0 -> 424 bytes
+ tests/files/bad-1-lzma2-4.lzma | Bin 408 -> 0 bytes
+ tests/files/bad-1-lzma2-4.xz | Bin 0 -> 408 bytes
+ tests/files/bad-1-lzma2-5.lzma | Bin 408 -> 0 bytes
+ tests/files/bad-1-lzma2-5.xz | Bin 0 -> 408 bytes
+ tests/files/bad-1-lzma2-6.lzma | Bin 68 -> 0 bytes
+ tests/files/bad-1-lzma2-6.xz | Bin 0 -> 68 bytes
+ tests/files/bad-1-lzma2-7.lzma | Bin 408 -> 0 bytes
+ tests/files/bad-1-lzma2-7.xz | Bin 0 -> 408 bytes
+ tests/files/bad-1-stream_flags-1.lzma | Bin 68 -> 0 bytes
+ tests/files/bad-1-stream_flags-1.xz | Bin 0 -> 68 bytes
+ tests/files/bad-1-stream_flags-2.lzma | Bin 68 -> 0 bytes
+ tests/files/bad-1-stream_flags-2.xz | Bin 0 -> 68 bytes
+ tests/files/bad-1-stream_flags-3.lzma | Bin 68 -> 0 bytes
+ tests/files/bad-1-stream_flags-3.xz | Bin 0 -> 68 bytes
+ tests/files/bad-1-vli-1.lzma | Bin 72 -> 0 bytes
+ tests/files/bad-1-vli-1.xz | Bin 0 -> 72 bytes
+ tests/files/bad-1-vli-2.lzma | Bin 72 -> 0 bytes
+ tests/files/bad-1-vli-2.xz | Bin 0 -> 72 bytes
+ tests/files/bad-2-compressed_data_padding.lzma | Bin 92 -> 0 bytes
+ tests/files/bad-2-compressed_data_padding.xz | Bin 0 -> 92 bytes
+ tests/files/bad-2-index-1.lzma | Bin 92 -> 0 bytes
+ tests/files/bad-2-index-1.xz | Bin 0 -> 92 bytes
+ tests/files/bad-2-index-2.lzma | Bin 92 -> 0 bytes
+ tests/files/bad-2-index-2.xz | Bin 0 -> 92 bytes
+ tests/files/bad-2-index-3.lzma | Bin 92 -> 0 bytes
+ tests/files/bad-2-index-3.xz | Bin 0 -> 92 bytes
+ tests/files/bad-2-index-4.lzma | Bin 92 -> 0 bytes
+ tests/files/bad-2-index-4.xz | Bin 0 -> 92 bytes
+ tests/files/good-0-empty.lzma | Bin 32 -> 0 bytes
+ tests/files/good-0-empty.xz | Bin 0 -> 32 bytes
+ tests/files/good-0cat-empty.lzma | Bin 64 -> 0 bytes
+ tests/files/good-0cat-empty.xz | Bin 0 -> 64 bytes
+ tests/files/good-0catpad-empty.lzma | Bin 68 -> 0 bytes
+ tests/files/good-0catpad-empty.xz | Bin 0 -> 68 bytes
+ tests/files/good-0pad-empty.lzma | Bin 36 -> 0 bytes
+ tests/files/good-0pad-empty.xz | Bin 0 -> 36 bytes
+ tests/files/good-1-3delta-lzma2.lzma | Bin 528 -> 0 bytes
+ tests/files/good-1-3delta-lzma2.xz | Bin 0 -> 528 bytes
+ tests/files/good-1-block_header-1.lzma | Bin 72 -> 0 bytes
+ tests/files/good-1-block_header-1.xz | Bin 0 -> 72 bytes
+ tests/files/good-1-block_header-2.lzma | Bin 68 -> 0 bytes
+ tests/files/good-1-block_header-2.xz | Bin 0 -> 68 bytes
+ tests/files/good-1-block_header-3.lzma | Bin 68 -> 0 bytes
+ tests/files/good-1-block_header-3.xz | Bin 0 -> 68 bytes
+ tests/files/good-1-check-crc32.lzma | Bin 68 -> 0 bytes
+ tests/files/good-1-check-crc32.xz | Bin 0 -> 68 bytes
+ tests/files/good-1-check-crc64.lzma | Bin 72 -> 0 bytes
+ tests/files/good-1-check-crc64.xz | Bin 0 -> 72 bytes
+ tests/files/good-1-check-none.lzma | Bin 64 -> 0 bytes
+ tests/files/good-1-check-none.xz | Bin 0 -> 64 bytes
+ tests/files/good-1-check-sha256.lzma | Bin 96 -> 0 bytes
+ tests/files/good-1-check-sha256.xz | Bin 0 -> 96 bytes
+ tests/files/good-1-delta-lzma2.tiff.lzma | Bin 51312 -> 0 bytes
+ tests/files/good-1-delta-lzma2.tiff.xz | Bin 0 -> 51312 bytes
+ tests/files/good-1-lzma2-1.lzma | Bin 424 -> 0 bytes
+ tests/files/good-1-lzma2-1.xz | Bin 0 -> 424 bytes
+ tests/files/good-1-lzma2-2.lzma | Bin 424 -> 0 bytes
+ tests/files/good-1-lzma2-2.xz | Bin 0 -> 424 bytes
+ tests/files/good-1-lzma2-3.lzma | Bin 408 -> 0 bytes
+ tests/files/good-1-lzma2-3.xz | Bin 0 -> 408 bytes
+ tests/files/good-1-sparc-lzma2.lzma | Bin 2292 -> 0 bytes
+ tests/files/good-1-sparc-lzma2.xz | Bin 0 -> 2292 bytes
+ tests/files/good-1-x86-lzma2.lzma | Bin 1936 -> 0 bytes
+ tests/files/good-1-x86-lzma2.xz | Bin 0 -> 1936 bytes
+ tests/files/good-2-lzma2.lzma | Bin 92 -> 0 bytes
+ tests/files/good-2-lzma2.xz | Bin 0 -> 92 bytes
+ tests/files/unsupported-block_header.lzma | Bin 68 -> 0 bytes
+ tests/files/unsupported-block_header.xz | Bin 0 -> 68 bytes
+ tests/files/unsupported-check.lzma | Bin 68 -> 0 bytes
+ tests/files/unsupported-check.xz | Bin 0 -> 68 bytes
+ tests/files/unsupported-filter_flags-1.lzma | Bin 68 -> 0 bytes
+ tests/files/unsupported-filter_flags-1.xz | Bin 0 -> 68 bytes
+ tests/files/unsupported-filter_flags-2.lzma | Bin 68 -> 0 bytes
+ tests/files/unsupported-filter_flags-2.xz | Bin 0 -> 68 bytes
+ tests/files/unsupported-filter_flags-3.lzma | Bin 68 -> 0 bytes
+ tests/files/unsupported-filter_flags-3.xz | Bin 0 -> 68 bytes
+ tests/test_files.sh | 6 +-
+ 116 files changed, 66 insertions(+), 68 deletions(-)
+
+commit 8e60c889a2816a63013a35c99ce26bf28f5b78eb
+Author: Lasse Collin <lasse.collin@tukaani.org>
+Date: 2008-09-30 13:57:44 +0300
+
+ Fixed Stream decoder to actually use the first_stream variable.
+
+ src/liblzma/common/stream_decoder.c | 5 +++++
+ 1 files changed, 5 insertions(+), 0 deletions(-)
+
+commit 3bdbc12c054d1961133ee19802af7dd3c3494543
+Author: Lasse Collin <lasse.collin@tukaani.org>
+Date: 2008-09-30 13:56:57 +0300
+
+ Added one more test file.
+
+ tests/files/README | 15 +++++++++++----
+ tests/files/bad-0cat-header_magic.lzma | Bin 0 -> 64 bytes
+ 2 files changed, 11 insertions(+), 4 deletions(-)
+
+commit a6639022fdc536e5659b070a465221b4cf7c51fa
+Author: Lasse Collin <lasse.collin@tukaani.org>
+Date: 2008-09-30 13:34:07 +0300
+
+ Fixed uninitialized variable in Stream decoder.
+
+ src/liblzma/common/stream_decoder.c | 1 +
+ 1 files changed, 1 insertions(+), 0 deletions(-)
+
+commit ed3709000a3f17ecefab29b2235d7e2221b00003
+Author: Lasse Collin <lasse.collin@tukaani.org>
+Date: 2008-09-30 13:27:28 +0300
+
+ Added two test files.
+
+ tests/files/README | 6 ++++++
+ tests/files/bad-0-footer_magic.lzma | Bin 0 -> 32 bytes
+ tests/files/bad-0-header_magic.lzma | Bin 0 -> 32 bytes
+ 3 files changed, 6 insertions(+), 0 deletions(-)
+
+commit ea560b0ea80525752bdcd0074d24f8dc170bbe29
+Author: Lasse Collin <lasse.collin@tukaani.org>
+Date: 2008-09-27 23:49:24 +0300
+
+ Fix conflicting Subblock helper filter's ID.
+
+ src/liblzma/common/common.h | 2 +-
+ 1 files changed, 1 insertions(+), 1 deletions(-)
+
+commit ad97483b6e55142fd8d5c041db057017a891cd95
+Author: Lasse Collin <lasse.collin@tukaani.org>
+Date: 2008-09-27 23:37:13 +0300
+
+ Changed magic bytes to match the updated spec. Filename
+ suffix wasn't changed yet.
+
+ src/liblzma/common/auto_decoder.c | 4 ++--
+ src/liblzma/common/stream_flags_common.c | 2 +-
+ tests/files/bad-0-backward_size.lzma | Bin 32 -> 32 bytes
+ tests/files/bad-0-empty-truncated.lzma | Bin 31 -> 31 bytes
+ tests/files/bad-0-nonempty_index.lzma | Bin 32 -> 32 bytes
+ tests/files/bad-0cat-alone.lzma | Bin 55 -> 55 bytes
+ tests/files/bad-0catpad-empty.lzma | Bin 69 -> 69 bytes
+ tests/files/bad-0pad-empty.lzma | Bin 37 -> 37 bytes
+ tests/files/bad-1-block_header-1.lzma | Bin 64 -> 64 bytes
+ tests/files/bad-1-block_header-2.lzma | Bin 64 -> 64 bytes
+ tests/files/bad-1-block_header-3.lzma | Bin 68 -> 68 bytes
+ tests/files/bad-1-block_header-4.lzma | Bin 72 -> 72 bytes
+ tests/files/bad-1-check-crc32.lzma | Bin 68 -> 68 bytes
+ tests/files/bad-1-check-crc64.lzma | Bin 72 -> 72 bytes
+ tests/files/bad-1-check-sha256.lzma | Bin 96 -> 96 bytes
+ tests/files/bad-1-lzma2-1.lzma | Bin 64 -> 64 bytes
+ tests/files/bad-1-lzma2-2.lzma | Bin 424 -> 424 bytes
+ tests/files/bad-1-lzma2-3.lzma | Bin 424 -> 424 bytes
+ tests/files/bad-1-lzma2-4.lzma | Bin 408 -> 408 bytes
+ tests/files/bad-1-lzma2-5.lzma | Bin 408 -> 408 bytes
+ tests/files/bad-1-lzma2-6.lzma | Bin 68 -> 68 bytes
+ tests/files/bad-1-lzma2-7.lzma | Bin 408 -> 408 bytes
+ tests/files/bad-1-stream_flags-1.lzma | Bin 68 -> 68 bytes
+ tests/files/bad-1-stream_flags-2.lzma | Bin 68 -> 68 bytes
+ tests/files/bad-1-stream_flags-3.lzma | Bin 68 -> 68 bytes
+ tests/files/bad-1-vli-1.lzma | Bin 72 -> 72 bytes
+ tests/files/bad-1-vli-2.lzma | Bin 72 -> 72 bytes
+ tests/files/bad-2-compressed_data_padding.lzma | Bin 92 -> 92 bytes
+ tests/files/bad-2-index-1.lzma | Bin 92 -> 92 bytes
+ tests/files/bad-2-index-2.lzma | Bin 92 -> 92 bytes
+ tests/files/bad-2-index-3.lzma | Bin 92 -> 92 bytes
+ tests/files/bad-2-index-4.lzma | Bin 92 -> 92 bytes
+ tests/files/good-0-empty.lzma | Bin 32 -> 32 bytes
+ tests/files/good-0cat-empty.lzma | Bin 64 -> 64 bytes
+ tests/files/good-0catpad-empty.lzma | Bin 68 -> 68 bytes
+ tests/files/good-0pad-empty.lzma | Bin 36 -> 36 bytes
+ tests/files/good-1-3delta-lzma2.lzma | Bin 528 -> 528 bytes
+ tests/files/good-1-block_header-1.lzma | Bin 72 -> 72 bytes
+ tests/files/good-1-block_header-2.lzma | Bin 68 -> 68 bytes
+ tests/files/good-1-block_header-3.lzma | Bin 68 -> 68 bytes
+ tests/files/good-1-check-crc32.lzma | Bin 68 -> 68 bytes
+ tests/files/good-1-check-crc64.lzma | Bin 72 -> 72 bytes
+ tests/files/good-1-check-none.lzma | Bin 64 -> 64 bytes
+ tests/files/good-1-check-sha256.lzma | Bin 96 -> 96 bytes
+ tests/files/good-1-delta-lzma2.tiff.lzma | Bin 51312 -> 51312 bytes
+ tests/files/good-1-lzma2-1.lzma | Bin 424 -> 424 bytes
+ tests/files/good-1-lzma2-2.lzma | Bin 424 -> 424 bytes
+ tests/files/good-1-lzma2-3.lzma | Bin 408 -> 408 bytes
+ tests/files/good-1-sparc-lzma2.lzma | Bin 2292 -> 2292 bytes
+ tests/files/good-1-x86-lzma2.lzma | Bin 1936 -> 1936 bytes
+ tests/files/good-2-lzma2.lzma | Bin 92 -> 92 bytes
+ tests/files/unsupported-block_header.lzma | Bin 68 -> 68 bytes
+ tests/files/unsupported-check.lzma | Bin 68 -> 68 bytes
+ tests/files/unsupported-filter_flags-1.lzma | Bin 68 -> 68 bytes
+ tests/files/unsupported-filter_flags-2.lzma | Bin 68 -> 68 bytes
+ tests/files/unsupported-filter_flags-3.lzma | Bin 68 -> 68 bytes
+ 56 files changed, 3 insertions(+), 3 deletions(-)
+
+commit 7a57069167e9e63394e2b095ee3a63253fcb51c7
+Author: Lasse Collin <lasse.collin@tukaani.org>
+Date: 2008-09-27 23:16:09 +0300
+
+ Remove po/fi.po since I'm not keeping it updated for now.
+
+ po/fi.po | 446 --------------------------------------------------------------
+ 1 files changed, 0 insertions(+), 446 deletions(-)
+
+commit 018ae09df8f2fee5a7374f307df4cb42fad0b81e
+Author: Lasse Collin <lasse.collin@tukaani.org>
+Date: 2008-09-27 23:13:54 +0300
+
+ Fix also test_compress.sh.
+
+ tests/test_compress.sh | 6 +++---
+ 1 files changed, 3 insertions(+), 3 deletions(-)
+
+commit 3a62a5fb85d2eebd8666e64ed5d364d095062858
+Author: Lasse Collin <lasse.collin@tukaani.org>
+Date: 2008-09-27 23:01:15 +0300
+
+ Fixed compilation of test_filter_flags.c, which was broken by
+ 1dcecfb09b55157b8653d747963069c8bed74f04.
+
+ tests/test_filter_flags.c | 16 ++++++++--------
+ 1 files changed, 8 insertions(+), 8 deletions(-)
+
+commit c6ca26eef7cd07eba449035514e2b8f9ac3111c0
+Author: Lasse Collin <lasse.collin@tukaani.org>
+Date: 2008-09-27 19:11:02 +0300
+
+ Updated file format specification. It changes the suffix
+ of the new format to .xz and removes the recently added
+ LZMA filter.
+
+ doc/file-format.txt | 125 +++++++++++++--------------------------------------
+ 1 files changed, 32 insertions(+), 93 deletions(-)
+
+commit 1dcecfb09b55157b8653d747963069c8bed74f04
+Author: Lasse Collin <lasse.collin@tukaani.org>
+Date: 2008-09-27 19:09:21 +0300
+
+ Some API changes, bug fixes, cleanups etc.
+
+ configure.ac | 18 +-
+ debug/full_flush.c | 7 +-
+ debug/known_sizes.c | 6 +-
+ debug/memusage.c | 22 ++--
+ debug/sync_flush.c | 18 +-
+ src/liblzma/Makefile.am | 2 +-
+ src/liblzma/api/lzma/delta.h | 8 +-
+ src/liblzma/api/lzma/lzma.h | 230 +++++++++++++++---------
+ src/liblzma/common/alignment.c | 7 +-
+ src/liblzma/common/alone_decoder.c | 11 +-
+ src/liblzma/common/alone_encoder.c | 9 +-
+ src/liblzma/common/chunk_size.c | 2 +-
+ src/liblzma/common/easy.c | 20 ++-
+ src/liblzma/common/filter_common.c | 4 +-
+ src/liblzma/common/filter_decoder.c | 4 +-
+ src/liblzma/common/filter_encoder.c | 4 +-
+ src/liblzma/common/init_encoder.c | 2 +-
+ src/liblzma/delta/delta_common.c | 12 +-
+ src/liblzma/delta/delta_common.h | 2 +-
+ src/liblzma/delta/delta_decoder.c | 2 +-
+ src/liblzma/delta/delta_encoder.c | 6 +-
+ src/liblzma/lz/lz_encoder.c | 30 ++--
+ src/liblzma/lz/lz_encoder.h | 26 ++--
+ src/liblzma/lz/lz_encoder_mf.c | 30 ++--
+ src/liblzma/lzma/Makefile.am | 4 +-
+ src/liblzma/lzma/lzma2_decoder.c | 10 +-
+ src/liblzma/lzma/lzma2_encoder.c | 27 +--
+ src/liblzma/lzma/lzma_common.h | 26 +--
+ src/liblzma/lzma/lzma_decoder.c | 37 ++--
+ src/liblzma/lzma/lzma_encoder.c | 51 +++---
+ src/liblzma/lzma/lzma_encoder_optimum_fast.c | 10 +-
+ src/liblzma/lzma/lzma_encoder_optimum_normal.c | 20 +-
+ src/liblzma/lzma/lzma_encoder_presets.c | 50 ++++--
+ src/liblzma/rangecoder/Makefile.am | 4 +-
+ src/liblzma/subblock/subblock_decoder.c | 2 +-
+ src/lzma/args.c | 33 +++--
+ src/lzma/help.c | 17 +-
+ src/lzma/options.c | 92 ++++++----
+ tests/test_block_header.c | 9 +-
+ tests/test_compress.sh | 4 +-
+ tests/test_filter_flags.c | 2 +-
+ 41 files changed, 482 insertions(+), 398 deletions(-)
+
+commit 5cc5064cae603b649c64c40125c7dd365de54c9d
+Author: Lasse Collin <lasse.collin@tukaani.org>
+Date: 2008-09-27 11:28:49 +0300
+
+ Added 7z2lzma.bash.
+
+ extra/7z2lzma/7z2lzma.bash | 114 ++++++++++++++++++++++++++++++++++++++++++++
+ 1 files changed, 114 insertions(+), 0 deletions(-)
+
+commit f147666a5cd15542d4e427da58629f4a71cc38e1
+Author: Lasse Collin <lasse.collin@tukaani.org>
+Date: 2008-09-17 22:11:39 +0300
+
+ Miscellaneous LZ and LZMA encoder cleanups
+
+ src/liblzma/api/lzma/lzma.h | 14 ------
+ src/liblzma/lz/lz_encoder.c | 8 +++-
+ src/liblzma/lzma/Makefile.am | 1 -
+ src/liblzma/lzma/lzma_encoder.c | 64 +++++++++++-------------------
+ src/liblzma/lzma/lzma_encoder_features.c | 59 ---------------------------
+ 5 files changed, 29 insertions(+), 117 deletions(-)
+
+commit 13d68b069849e19c33822cd8996cd6447890abb1
+Author: Lasse Collin <lasse.collin@tukaani.org>
+Date: 2008-09-13 13:54:00 +0300
+
+ LZ decoder cleanup
+
+ src/liblzma/lz/lz_decoder.c | 5 ++---
+ 1 files changed, 2 insertions(+), 3 deletions(-)
+
+commit 13a74b78e37f16c9096ba5fe1859cc04eaa2f9f7
+Author: Lasse Collin <lasse.collin@tukaani.org>
+Date: 2008-09-13 12:10:43 +0300
+
+ Renamed constants:
+ - LZMA_VLI_VALUE_MAX -> LZMA_VLI_MAX
+ - LZMA_VLI_VALUE_UNKNOWN -> LZMA_VLI_UNKNOWN
+ - LZMA_HEADER_ERRRO -> LZMA_OPTIONS_ERROR
+
+ debug/full_flush.c | 2 +-
+ debug/known_sizes.c | 2 +-
+ debug/sync_flush.c | 2 +-
+ src/liblzma/api/lzma/alignment.h | 2 +-
+ src/liblzma/api/lzma/base.h | 4 +-
+ src/liblzma/api/lzma/block.h | 28 +++++++++++++-------------
+ src/liblzma/api/lzma/container.h | 12 +++++-----
+ src/liblzma/api/lzma/filter.h | 28 +++++++++++++-------------
+ src/liblzma/api/lzma/index.h | 2 +-
+ src/liblzma/api/lzma/lzma.h | 4 +-
+ src/liblzma/api/lzma/simple.h | 2 +-
+ src/liblzma/api/lzma/stream_flags.h | 20 +++++++++---------
+ src/liblzma/api/lzma/vli.h | 16 +++++++-------
+ src/liblzma/common/alignment.c | 6 ++--
+ src/liblzma/common/alone_decoder.c | 2 +-
+ src/liblzma/common/auto_decoder.c | 2 +-
+ src/liblzma/common/block_decoder.c | 12 +++++-----
+ src/liblzma/common/block_encoder.c | 6 ++--
+ src/liblzma/common/block_header_decoder.c | 16 +++++++-------
+ src/liblzma/common/block_header_encoder.c | 24 +++++++++++-----------
+ src/liblzma/common/block_util.c | 8 +++---
+ src/liblzma/common/chunk_size.c | 2 +-
+ src/liblzma/common/easy.c | 4 +-
+ src/liblzma/common/filter_common.c | 22 ++++++++++----------
+ src/liblzma/common/filter_decoder.c | 6 ++--
+ src/liblzma/common/filter_encoder.c | 14 ++++++------
+ src/liblzma/common/index.c | 24 ++++++++++------------
+ src/liblzma/common/index.h | 2 +-
+ src/liblzma/common/index_hash.c | 13 +++++------
+ src/liblzma/common/stream_decoder.c | 4 +-
+ src/liblzma/common/stream_encoder.c | 4 +-
+ src/liblzma/common/stream_flags_common.c | 6 ++--
+ src/liblzma/common/stream_flags_decoder.c | 6 ++--
+ src/liblzma/common/stream_flags_encoder.c | 4 +-
+ src/liblzma/common/vli_encoder.c | 2 +-
+ src/liblzma/common/vli_size.c | 2 +-
+ src/liblzma/delta/delta_common.c | 2 +-
+ src/liblzma/delta/delta_decoder.c | 2 +-
+ src/liblzma/delta/delta_encoder.c | 2 +-
+ src/liblzma/lz/lz_decoder.c | 2 +-
+ src/liblzma/lz/lz_encoder.c | 2 +-
+ src/liblzma/lzma/lzma2_decoder.c | 6 ++--
+ src/liblzma/lzma/lzma_decoder.c | 14 ++++++------
+ src/liblzma/lzma/lzma_encoder.c | 8 +++---
+ src/liblzma/simple/simple_coder.c | 2 +-
+ src/liblzma/simple/simple_decoder.c | 2 +-
+ src/liblzma/subblock/subblock_decoder.c | 6 ++--
+ src/liblzma/subblock/subblock_encoder.c | 17 +++++++--------
+ src/lzma/args.c | 2 +-
+ src/lzma/error.c | 2 +-
+ src/lzma/list.c | 6 ++--
+ src/lzmadec/lzmadec.c | 2 +-
+ tests/test_block.c | 8 +++---
+ tests/test_block_header.c | 30 ++++++++++++++--------------
+ tests/test_filter_flags.c | 2 +-
+ tests/test_index.c | 2 +-
+ tests/test_stream_flags.c | 8 +++---
+ tests/tests.h | 2 +-
+ 58 files changed, 220 insertions(+), 224 deletions(-)
+
+commit 320601b2c7b08fc7da9da18d5bf7c3c1a189b080
+Author: Lasse Collin <lasse.collin@tukaani.org>
+Date: 2008-09-12 22:41:40 +0300
+
+ Improved the Stream Flags handling API.
+
+ src/liblzma/api/lzma/stream_flags.h | 84 +++++++++++++++++++++++++++--
+ src/liblzma/common/stream_decoder.c | 5 +-
+ src/liblzma/common/stream_encoder.c | 2 +
+ src/liblzma/common/stream_flags_common.c | 28 +++++++---
+ src/liblzma/common/stream_flags_common.h | 9 +++
+ src/liblzma/common/stream_flags_decoder.c | 3 +-
+ src/liblzma/common/stream_flags_encoder.c | 10 +++-
+ tests/test_stream_flags.c | 8 ++-
+ 8 files changed, 129 insertions(+), 20 deletions(-)
+
+commit ec490da5228263b25bf786bb23d1008468f55b30
+Author: Lasse Collin <lasse.collin@tukaani.org>
+Date: 2008-09-11 23:10:44 +0300
+
+ Simplified debug/known_sizes.c to match the relaxed
+ requirements of Block encoder.
+
+ debug/known_sizes.c | 14 +++++---------
+ 1 files changed, 5 insertions(+), 9 deletions(-)
+
+commit 16e8b98f2659347edfa74afdbbb9e73311153cb9
+Author: Lasse Collin <lasse.collin@tukaani.org>
+Date: 2008-09-11 23:09:24 +0300
+
+ Remove a check from Block encoder that should have already
+ been removed in 2ba01bfa755e47ff6af84a978e3c8d63d7d2775e.
+
+ src/liblzma/common/block_encoder.c | 5 -----
+ 1 files changed, 0 insertions(+), 5 deletions(-)
+
+commit 5a710c3805bdf6d7e3c92e954e4e4565b27bcb13
+Author: Lasse Collin <lasse.collin@tukaani.org>
+Date: 2008-09-11 20:02:38 +0300
+
+ Remove bogus #includes.
+
+ src/liblzma/common/Makefile.am | 1 -
+ src/liblzma/common/stream_decoder.c | 3 --
+ src/liblzma/common/stream_encoder.c | 1 -
+ src/liblzma/common/stream_flags_decoder.h | 31 -----------------------------
+ 4 files changed, 0 insertions(+), 36 deletions(-)
+
+commit 01892b2ca5f69bed0ea746e04b604030d57806bb
+Author: Lasse Collin <lasse.collin@tukaani.org>
+Date: 2008-09-11 10:49:14 +0300
+
+ Updated THANKS.
+
+ THANKS | 1 +
+ 1 files changed, 1 insertions(+), 0 deletions(-)
+
+commit 962f2231d49409fe6852e44ffe8c5dbabb04bc7d
+Author: Lasse Collin <lasse.collin@tukaani.org>
+Date: 2008-09-11 10:48:12 +0300
+
+ Fix a compiler error on big endian systems that don't
+ support unaligned memory access.
+
+ src/common/integer.h | 32 ++++++++++++++++++--------------
+ 1 files changed, 18 insertions(+), 14 deletions(-)
+
+commit fa3ab0df8ae7a8a1ad55b52266dc0fd387458671
+Author: Lasse Collin <lasse.collin@tukaani.org>
+Date: 2008-09-11 10:46:14 +0300
+
+ Silence a compiler warning.
+
+ src/lzma/process.c | 2 +-
+ 1 files changed, 1 insertions(+), 1 deletions(-)
+
+commit 9373e81e18822db4972819442ea4c2cb9955470b
+Author: Lasse Collin <lasse.collin@tukaani.org>
+Date: 2008-09-10 19:16:32 +0300
+
+ Bumped version to 4.999.6alpha.
+
+ configure.ac | 2 +-
+ src/liblzma/api/lzma/version.h | 2 +-
+ 2 files changed, 2 insertions(+), 2 deletions(-)
+
+commit cb072b7c8442ba68bb0c62c0abbbe939794887a3
+Author: Lasse Collin <lasse.collin@tukaani.org>
+Date: 2008-09-10 17:02:00 +0300
+
+ Check for LZMA_FILTER_RESERVED_START in filter_flags_encoder.c.
+ Use LZMA_PROG_ERROR instead of LZMA_HEADER_ERROR if the Filter ID
+ is in the reserved range. This allows Block Header encoder to
+ detect unallowed Filter IDs, which is good for Stream encoder.
+
+ src/liblzma/common/filter_flags_encoder.c | 7 ++++---
+ 1 files changed, 4 insertions(+), 3 deletions(-)
+
+commit 123ab0acec435c9e9866a99e30482116cfbd9ba5
+Author: Lasse Collin <lasse.collin@tukaani.org>
+Date: 2008-09-10 16:44:32 +0300
+
+ Filter handling cleanups
+
+ src/liblzma/api/lzma/filter.h | 133 +++++++++++++++++++++++++++--------
+ src/liblzma/common/filter_common.h | 3 +
+ src/liblzma/common/filter_decoder.c | 80 +++++++--------------
+ src/liblzma/common/filter_decoder.h | 5 --
+ src/liblzma/common/filter_encoder.c | 82 +++++++---------------
+ src/liblzma/common/filter_encoder.h | 4 -
+ 6 files changed, 156 insertions(+), 151 deletions(-)
+
+commit 9cfcd0c4f2f865d8fbbb46ea28344a9be0dd8ad1
+Author: Lasse Collin <lasse.collin@tukaani.org>
+Date: 2008-09-10 00:33:00 +0300
+
+ Comments
+
+ src/liblzma/common/stream_encoder.c | 6 +++++-
+ 1 files changed, 5 insertions(+), 1 deletions(-)
+
+commit 2ba01bfa755e47ff6af84a978e3c8d63d7d2775e
+Author: Lasse Collin <lasse.collin@tukaani.org>
+Date: 2008-09-10 00:27:02 +0300
+
+ Cleaned up Block encoder and moved the no longer shared
+ code from block_private.h to block_decoder.c. Now the Block
+ encoder doesn't need compressed_size and uncompressed_size
+ from lzma_block structure to be initialized.
+
+ src/liblzma/api/lzma/block.h | 3 -
+ src/liblzma/common/Makefile.am | 1 -
+ src/liblzma/common/block_decoder.c | 23 +++++++++-
+ src/liblzma/common/block_encoder.c | 92 +++++++++++++++++-------------------
+ src/liblzma/common/block_private.h | 47 ------------------
+ 5 files changed, 66 insertions(+), 100 deletions(-)
+
+commit 07efcb5a6bc5d7018798ebd728586f84183e7d64
+Author: Lasse Collin <lasse.collin@tukaani.org>
+Date: 2008-09-07 10:23:13 +0300
+
+ Changed Filter ID of LZMA to 0x20.
+
+ doc/file-format.txt | 4 ++--
+ src/liblzma/api/lzma/lzma.h | 2 +-
+ 2 files changed, 3 insertions(+), 3 deletions(-)
+
+commit 32fe5fa541e82c08e054086279079ae5016bd8d8
+Author: Lasse Collin <lasse.collin@tukaani.org>
+Date: 2008-09-06 23:42:50 +0300
+
+ Comments
+
+ src/liblzma/api/lzma/base.h | 81 +++++++++++++++++++++++++-------------
+ src/liblzma/api/lzma/container.h | 6 ++-
+ src/liblzma/lz/lz_encoder.c | 3 +-
+ src/liblzma/lz/lz_encoder.h | 12 +++---
+ src/liblzma/lz/lz_encoder_mf.c | 2 +-
+ 5 files changed, 65 insertions(+), 39 deletions(-)
+
+commit 0a31ed9d5e3cde4feb094b66f3a8b2c074605d84
+Author: Lasse Collin <lasse.collin@tukaani.org>
+Date: 2008-09-06 15:14:30 +0300
+
+ Some API cleanups
+
+ src/liblzma/api/lzma/base.h | 314 ++++++++++++++++++++++-------------
+ src/liblzma/api/lzma/check.h | 10 +
+ src/liblzma/api/lzma/container.h | 40 +++--
+ src/liblzma/common/auto_decoder.c | 18 +-
+ src/liblzma/common/common.c | 7 +
+ src/liblzma/common/common.h | 18 +-
+ src/liblzma/common/easy.c | 2 +-
+ src/liblzma/common/stream_decoder.c | 31 ++--
+ src/lzma/process.c | 2 +-
+ src/lzmadec/lzmadec.c | 6 +-
+ tests/tests.h | 72 ++------
+ 11 files changed, 301 insertions(+), 219 deletions(-)
+
+commit da98df54400998be2a6c3876f9655a3c51b93c10
+Author: Lasse Collin <lasse.collin@tukaani.org>
+Date: 2008-09-04 11:53:06 +0300
+
+ Added support for raw encoding and decoding to the command
+ line tool, and made various cleanups. --lzma was renamed to
+ --lzma1 to prevent people from accidentally using LZMA when
+ they want LZMA2.
+
+ src/lzma/args.c | 17 +++++++++--------
+ src/lzma/args.h | 1 +
+ src/lzma/help.c | 24 ++++++------------------
+ src/lzma/process.c | 42 ++++++++++++++++++++++++++++++++++--------
+ 4 files changed, 50 insertions(+), 34 deletions(-)
+
+commit 2496aee8a7741a8a0d42987db41ff2cf1a4bdabd
+Author: Lasse Collin <lasse.collin@tukaani.org>
+Date: 2008-09-04 10:39:15 +0300
+
+ Don't allow LZMA_SYNC_FLUSH with decoders anymore. There's
+ simply nothing that would use it. Allow LZMA_FINISH to the
+ decoders, which will usually ignore it (auto decoder and
+ Stream decoder being exceptions).
+
+ src/liblzma/common/alone_decoder.c | 1 -
+ src/liblzma/common/block_decoder.c | 2 +-
+ src/liblzma/common/filter_decoder.c | 2 +-
+ 3 files changed, 2 insertions(+), 3 deletions(-)
+
+commit bea301c26d5d52675e11e0236faec0492af98f60
+Author: Lasse Collin <lasse.collin@tukaani.org>
+Date: 2008-09-03 17:06:25 +0300
+
+ Minor updates to the file format specification.
+
+ doc/file-format.txt | 105 +++++++++++++++++++++++++++++++++++++++++----------
+ 1 files changed, 85 insertions(+), 20 deletions(-)
+
+commit 9c75b089b4a9e0edcf4cf7970a4383768707d6c8
+Author: Lasse Collin <lasse.collin@tukaani.org>
+Date: 2008-09-02 19:33:32 +0300
+
+ Command line tool fixes
+
+ src/lzma/process.c | 21 +++++++++++++--------
+ 1 files changed, 13 insertions(+), 8 deletions(-)
+
+commit bab0590504b5aeff460ab4ca8c964dd7c1bad9e4
+Author: Lasse Collin <lasse.collin@tukaani.org>
+Date: 2008-09-02 19:31:42 +0300
+
+ Auto decoder cleanup
+
+ src/liblzma/common/auto_decoder.c | 2 +-
+ 1 files changed, 1 insertions(+), 1 deletions(-)
+
+commit 689602336d126a46b60d791a67decab65e1e81f5
+Author: Lasse Collin <lasse.collin@tukaani.org>
+Date: 2008-09-02 19:12:12 +0300
+
+ Updated auto decoder to handle LZMA_CONCATENATED when decoding
+ LZMA_Alone files. Decoding of concatenated LZMA_Alone files is
+ intentionally not supported, so it is better to put this in
+ auto decoder than LZMA_Alone decoder.
+
+ src/liblzma/common/auto_decoder.c | 87 ++++++++++++++++++++++++++++++-------
+ 1 files changed, 71 insertions(+), 16 deletions(-)
+
+commit 80c4158f19904026433eb6f5d5ca98a0ecd4f66c
+Author: Lasse Collin <lasse.collin@tukaani.org>
+Date: 2008-09-02 14:56:52 +0300
+
+ Stream decoder cleanups
+
+ src/liblzma/common/stream_decoder.c | 57 +++++++++++++++++++---------------
+ 1 files changed, 32 insertions(+), 25 deletions(-)
+
+commit fc681657450ce57be1fe08f7a15d31dcc705e514
+Author: Lasse Collin <lasse.collin@tukaani.org>
+Date: 2008-09-02 11:45:39 +0300
+
+ Some fixes to LZ encoder.
+
+ src/liblzma/lz/lz_encoder.c | 56 +++++++++++++++++++----
+ src/liblzma/lz/lz_encoder.h | 18 ++++---
+ src/liblzma/lz/lz_encoder_mf.c | 95 ++++++++++++++++------------------------
+ 3 files changed, 94 insertions(+), 75 deletions(-)
+
+commit ede675f9ac1ca82a7d7c290324adba672118bc8d
+Author: Lasse Collin <lasse.collin@tukaani.org>
+Date: 2008-08-31 11:47:01 +0300
+
+ Fix wrong pointer calculation in LZMA encoder.
+
+ src/liblzma/lzma/lzma_encoder.c | 4 +++-
+ 1 files changed, 3 insertions(+), 1 deletions(-)
+
+commit 3b34851de1eaf358cf9268922fa0eeed8278d680
+Author: Lasse Collin <lasse.collin@tukaani.org>
+Date: 2008-08-28 22:53:15 +0300
+
+ Sort of garbage collection commit. :-| Many things are still
+ broken. API has changed a lot and it will still change a
+ little more here and there. The command line tool doesn't
+ have all the required changes to reflect the API changes, so
+ it's easy to get "internal error" or trigger assertions.
+
+ configure.ac | 356 +++---
+ debug/Makefile.am | 5 +-
+ debug/crc32.c | 45 +
+ debug/full_flush.c | 14 +-
+ debug/hex2bin.c | 54 +
+ debug/known_sizes.c | 135 ++
+ debug/memusage.c | 8 +-
+ debug/sync_flush.c | 20 +-
+ src/common/integer.h | 26 +-
+ src/common/sysdefs.h | 42 +-
+ src/liblzma/Makefile.am | 17 +-
+ src/liblzma/api/Makefile.am | 6 +-
+ src/liblzma/api/lzma.h | 161 ++-
+ src/liblzma/api/lzma/alignment.h | 6 +-
+ src/liblzma/api/lzma/alone.h | 52 -
+ src/liblzma/api/lzma/auto.h | 36 -
+ src/liblzma/api/lzma/base.h | 61 +-
+ src/liblzma/api/lzma/block.h | 38 +-
+ src/liblzma/api/lzma/check.h | 41 +-
+ src/liblzma/api/lzma/container.h | 252 ++++
+ src/liblzma/api/lzma/delta.h | 36 +-
+ src/liblzma/api/lzma/easy.h | 121 --
+ src/liblzma/api/lzma/filter.h | 74 +-
+ src/liblzma/api/lzma/index.h | 40 +-
+ src/liblzma/api/lzma/index_hash.h | 12 +-
+ src/liblzma/api/lzma/lzma.h | 222 ++--
+ src/liblzma/api/lzma/memlimit.h | 15 +-
+ src/liblzma/api/lzma/raw.h | 60 -
+ src/liblzma/api/lzma/simple.h | 2 +-
+ src/liblzma/api/lzma/stream.h | 53 -
+ src/liblzma/api/lzma/stream_flags.h | 17 +-
+ src/liblzma/api/lzma/subblock.h | 4 +-
+ src/liblzma/api/lzma/version.h | 10 +-
+ src/liblzma/api/lzma/vli.h | 131 +--
+ src/liblzma/check/check.c | 128 +--
+ src/liblzma/check/check.h | 67 +-
+ src/liblzma/check/sha256.c | 29 +-
+ src/liblzma/common/Makefile.am | 51 +-
+ src/liblzma/common/alignment.c | 4 +-
+ src/liblzma/common/allocator.c | 58 -
+ src/liblzma/common/alone_decoder.c | 49 +-
+ src/liblzma/common/alone_decoder.h | 9 +-
+ src/liblzma/common/alone_encoder.c | 13 +-
+ src/liblzma/common/auto_decoder.c | 38 +-
+ src/liblzma/common/block_decoder.c | 67 +-
+ src/liblzma/common/block_decoder.h | 2 +-
+ src/liblzma/common/block_encoder.c | 42 +-
+ src/liblzma/common/block_encoder.h | 2 +-
+ src/liblzma/common/block_header_decoder.c | 6 +-
+ src/liblzma/common/block_header_encoder.c | 9 +-
+ src/liblzma/common/block_util.c | 10 +-
+ src/liblzma/common/code.c | 203 ---
+ src/liblzma/common/common.c | 298 +++++
+ src/liblzma/common/common.h | 237 ++--
+ src/liblzma/common/delta_common.c | 66 -
+ src/liblzma/common/delta_common.h | 44 -
+ src/liblzma/common/delta_decoder.c | 61 -
+ src/liblzma/common/delta_decoder.h | 28 -
+ src/liblzma/common/delta_encoder.c | 98 --
+ src/liblzma/common/delta_encoder.h | 28 -
+ src/liblzma/common/easy.c | 18 +-
+ src/liblzma/common/features.c | 66 -
+ src/liblzma/common/filter_common.c | 262 ++++
+ src/liblzma/common/filter_common.h | 52 +
+ src/liblzma/common/filter_decoder.c | 236 ++++
+ src/liblzma/common/filter_decoder.h | 35 +
+ src/liblzma/common/filter_encoder.c | 308 +++++
+ src/liblzma/common/filter_encoder.h | 38 +
+ src/liblzma/common/filter_flags_decoder.c | 185 +---
+ src/liblzma/common/filter_flags_encoder.c | 261 +----
+ src/liblzma/common/index_decoder.c | 14 +-
+ src/liblzma/common/index_encoder.c | 16 +-
+ src/liblzma/common/index_hash.c | 8 +-
+ src/liblzma/common/init_encoder.c | 2 +-
+ src/liblzma/common/memory_usage.c | 112 --
+ src/liblzma/common/next_coder.c | 65 -
+ src/liblzma/common/raw_common.c | 127 --
+ src/liblzma/common/raw_common.h | 30 -
+ src/liblzma/common/raw_decoder.c | 116 --
+ src/liblzma/common/raw_decoder.h | 29 -
+ src/liblzma/common/raw_encoder.c | 111 --
+ src/liblzma/common/raw_encoder.h | 29 -
+ src/liblzma/common/stream_common.c | 23 -
+ src/liblzma/common/stream_common.h | 31 -
+ src/liblzma/common/stream_decoder.c | 238 +++-
+ src/liblzma/common/stream_decoder.h | 4 +-
+ src/liblzma/common/stream_encoder.c | 35 +-
+ src/liblzma/common/stream_encoder.h | 2 +-
+ src/liblzma/common/stream_flags_common.c | 40 +
+ src/liblzma/common/stream_flags_common.h | 31 +
+ src/liblzma/common/stream_flags_decoder.c | 2 +-
+ src/liblzma/common/stream_flags_encoder.c | 2 +-
+ src/liblzma/common/stream_flags_equal.c | 36 -
+ src/liblzma/common/version.c | 25 -
+ src/liblzma/common/vli_decoder.c | 29 +-
+ src/liblzma/common/vli_encoder.c | 23 +-
+ src/liblzma/common/vli_size.c | 37 +
+ src/liblzma/delta/Makefile.am | 34 +
+ src/liblzma/delta/delta_common.c | 66 +
+ src/liblzma/delta/delta_common.h | 44 +
+ src/liblzma/delta/delta_decoder.c | 82 ++
+ src/liblzma/delta/delta_decoder.h | 32 +
+ src/liblzma/delta/delta_encoder.c | 119 ++
+ src/liblzma/delta/delta_encoder.h | 30 +
+ src/liblzma/lz/Makefile.am | 35 +-
+ src/liblzma/lz/bt2.c | 27 -
+ src/liblzma/lz/bt2.h | 31 -
+ src/liblzma/lz/bt3.c | 29 -
+ src/liblzma/lz/bt3.h | 31 -
+ src/liblzma/lz/bt4.c | 30 -
+ src/liblzma/lz/bt4.h | 31 -
+ src/liblzma/lz/hc3.c | 30 -
+ src/liblzma/lz/hc3.h | 31 -
+ src/liblzma/lz/hc4.c | 31 -
+ src/liblzma/lz/hc4.h | 31 -
+ src/liblzma/lz/lz_decoder.c | 547 +++------
+ src/liblzma/lz/lz_decoder.h | 308 +++---
+ src/liblzma/lz/lz_encoder.c | 780 ++++++------
+ src/liblzma/lz/lz_encoder.h | 334 ++++--
+ src/liblzma/lz/lz_encoder_hash.h | 104 ++
+ src/liblzma/lz/lz_encoder_mf.c | 780 ++++++++++++
+ src/liblzma/lz/lz_encoder_private.h | 40 -
+ src/liblzma/lz/match_c.h | 412 ------
+ src/liblzma/lz/match_h.h | 69 -
+ src/liblzma/lzma/Makefile.am | 37 +-
+ src/liblzma/lzma/fastpos.h | 8 +-
+ src/liblzma/lzma/lzma2_decoder.c | 318 +++++
+ src/liblzma/lzma/lzma2_decoder.h | 35 +
+ src/liblzma/lzma/lzma2_encoder.c | 406 ++++++
+ src/liblzma/lzma/lzma2_encoder.h | 34 +
+ src/liblzma/lzma/lzma_common.h | 208 +++-
+ src/liblzma/lzma/lzma_decoder.c | 1306 ++++++++++++--------
+ src/liblzma/lzma/lzma_decoder.h | 21 +-
+ src/liblzma/lzma/lzma_encoder.c | 576 +++++++--
+ src/liblzma/lzma/lzma_encoder.h | 38 +-
+ src/liblzma/lzma/lzma_encoder_features.c | 2 +-
+ src/liblzma/lzma/lzma_encoder_getoptimum.c | 925 --------------
+ src/liblzma/lzma/lzma_encoder_getoptimumfast.c | 201 ---
+ src/liblzma/lzma/lzma_encoder_init.c | 228 ----
+ src/liblzma/lzma/lzma_encoder_optimum_fast.c | 193 +++
+ src/liblzma/lzma/lzma_encoder_optimum_normal.c | 875 +++++++++++++
+ src/liblzma/lzma/lzma_encoder_presets.c | 52 +-
+ src/liblzma/lzma/lzma_encoder_private.h | 174 +--
+ src/liblzma/lzma/lzma_literal.c | 51 -
+ src/liblzma/lzma/lzma_literal.h | 71 --
+ src/liblzma/rangecoder/Makefile.am | 10 +-
+ src/liblzma/rangecoder/price.h | 111 ++
+ src/liblzma/rangecoder/price_table.c | 84 +-
+ src/liblzma/rangecoder/price_table_gen.c | 55 -
+ src/liblzma/rangecoder/price_table_init.c | 33 +-
+ src/liblzma/rangecoder/price_tablegen.c | 56 +
+ src/liblzma/rangecoder/range_common.h | 17 +-
+ src/liblzma/rangecoder/range_decoder.h | 209 ++--
+ src/liblzma/rangecoder/range_encoder.h | 92 +--
+ src/liblzma/simple/Makefile.am | 12 +
+ src/liblzma/simple/simple_coder.c | 8 +-
+ src/liblzma/simple/simple_decoder.c | 47 +
+ src/liblzma/simple/simple_decoder.h | 29 +
+ src/liblzma/simple/simple_encoder.c | 45 +
+ src/liblzma/simple/simple_encoder.h | 30 +
+ src/liblzma/subblock/Makefile.am | 4 +-
+ src/liblzma/subblock/subblock_decoder.c | 20 +-
+ src/liblzma/subblock/subblock_decoder_helper.c | 2 +-
+ src/liblzma/subblock/subblock_encoder.c | 28 +-
+ src/lzma/args.c | 35 +-
+ src/lzma/args.h | 4 +-
+ src/lzma/options.c | 14 +-
+ src/lzma/process.c | 88 +-
+ src/lzmadec/lzmadec.c | 157 +--
+ tests/Makefile.am | 1 +
+ tests/files/README | 303 ++---
+ tests/files/bad-0-backward_size.lzma | Bin 0 -> 32 bytes
+ tests/files/bad-0-empty-truncated.lzma | Bin 0 -> 31 bytes
+ tests/files/bad-0-nonempty_index.lzma | Bin 0 -> 32 bytes
+ tests/files/bad-0cat-alone.lzma | Bin 0 -> 55 bytes
+ tests/files/bad-0catpad-empty.lzma | Bin 0 -> 69 bytes
+ tests/files/bad-0pad-empty.lzma | Bin 0 -> 37 bytes
+ tests/files/bad-1-block_header-1.lzma | Bin 0 -> 64 bytes
+ tests/files/bad-1-block_header-2.lzma | Bin 0 -> 64 bytes
+ tests/files/bad-1-block_header-3.lzma | Bin 0 -> 68 bytes
+ tests/files/bad-1-block_header-4.lzma | Bin 0 -> 72 bytes
+ tests/files/bad-1-check-crc32.lzma | Bin 0 -> 68 bytes
+ tests/files/bad-1-check-crc64.lzma | Bin 0 -> 72 bytes
+ tests/files/bad-1-check-sha256.lzma | Bin 0 -> 96 bytes
+ tests/files/bad-1-lzma2-1.lzma | Bin 0 -> 64 bytes
+ tests/files/bad-1-lzma2-2.lzma | Bin 0 -> 424 bytes
+ tests/files/bad-1-lzma2-3.lzma | Bin 0 -> 424 bytes
+ tests/files/bad-1-lzma2-4.lzma | Bin 0 -> 408 bytes
+ tests/files/bad-1-lzma2-5.lzma | Bin 0 -> 408 bytes
+ tests/files/bad-1-lzma2-6.lzma | Bin 0 -> 68 bytes
+ tests/files/bad-1-lzma2-7.lzma | Bin 0 -> 408 bytes
+ tests/files/bad-1-stream_flags-1.lzma | Bin 0 -> 68 bytes
+ tests/files/bad-1-stream_flags-2.lzma | Bin 0 -> 68 bytes
+ tests/files/bad-1-stream_flags-3.lzma | Bin 0 -> 68 bytes
+ tests/files/bad-1-vli-1.lzma | Bin 0 -> 72 bytes
+ tests/files/bad-1-vli-2.lzma | Bin 0 -> 72 bytes
+ tests/files/bad-2-compressed_data_padding.lzma | Bin 0 -> 92 bytes
+ tests/files/bad-2-index-1.lzma | Bin 0 -> 92 bytes
+ tests/files/bad-2-index-2.lzma | Bin 0 -> 92 bytes
+ tests/files/bad-2-index-3.lzma | Bin 0 -> 92 bytes
+ tests/files/bad-2-index-4.lzma | Bin 0 -> 92 bytes
+ tests/files/bad-cat-single-none-pad_garbage_1.lzma | Bin 65 -> 0 bytes
+ tests/files/bad-cat-single-none-pad_garbage_2.lzma | Bin 65 -> 0 bytes
+ tests/files/bad-cat-single-none-pad_garbage_3.lzma | Bin 65 -> 0 bytes
+ tests/files/bad-multi-none-1.lzma | Bin 54 -> 0 bytes
+ tests/files/bad-multi-none-2.lzma | Bin 53 -> 0 bytes
+ tests/files/bad-multi-none-3.lzma | Bin 53 -> 0 bytes
+ tests/files/bad-multi-none-block_1.lzma | Bin 66 -> 0 bytes
+ tests/files/bad-multi-none-block_2.lzma | Bin 66 -> 0 bytes
+ tests/files/bad-multi-none-block_3.lzma | Bin 58 -> 0 bytes
+ tests/files/bad-multi-none-extra_1.lzma | Bin 54 -> 0 bytes
+ tests/files/bad-multi-none-extra_2.lzma | Bin 54 -> 0 bytes
+ tests/files/bad-multi-none-extra_3.lzma | Bin 55 -> 0 bytes
+ tests/files/bad-multi-none-header_1.lzma | Bin 57 -> 0 bytes
+ tests/files/bad-multi-none-header_2.lzma | Bin 61 -> 0 bytes
+ tests/files/bad-multi-none-header_3.lzma | Bin 59 -> 0 bytes
+ tests/files/bad-multi-none-header_4.lzma | Bin 59 -> 0 bytes
+ tests/files/bad-multi-none-header_5.lzma | Bin 58 -> 0 bytes
+ tests/files/bad-multi-none-header_6.lzma | Bin 59 -> 0 bytes
+ tests/files/bad-multi-none-header_7.lzma | Bin 59 -> 0 bytes
+ tests/files/bad-multi-none-index_1.lzma | Bin 51 -> 0 bytes
+ tests/files/bad-multi-none-index_2.lzma | Bin 49 -> 0 bytes
+ tests/files/bad-multi-none-index_3.lzma | Bin 51 -> 0 bytes
+ tests/files/bad-multi-none-index_4.lzma | Bin 51 -> 0 bytes
+ tests/files/bad-single-data_after_eopm_1.lzma | Bin 55 -> 0 bytes
+ tests/files/bad-single-data_after_eopm_2.lzma | Bin 56 -> 0 bytes
+ tests/files/bad-single-lzma-flush_beginning.lzma | Bin 53 -> 0 bytes
+ tests/files/bad-single-lzma-flush_twice.lzma | Bin 63 -> 0 bytes
+ tests/files/bad-single-none-empty.lzma | Bin 19 -> 0 bytes
+ .../files/bad-single-none-footer_filter_flags.lzma | Bin 30 -> 0 bytes
+ tests/files/bad-single-none-too_long_vli.lzma | Bin 39 -> 0 bytes
+ tests/files/bad-single-none-truncated.lzma | Bin 29 -> 0 bytes
+ tests/files/bad-single-subblock-padding_loop.lzma | Bin 43 -> 0 bytes
+ tests/files/bad-single-subblock1023-slow.lzma | Bin 7886 -> 0 bytes
+ tests/files/bad-single-subblock_subblock.lzma | Bin 26 -> 0 bytes
+ tests/files/good-0-empty.lzma | Bin 0 -> 32 bytes
+ tests/files/good-0cat-empty.lzma | Bin 0 -> 64 bytes
+ tests/files/good-0catpad-empty.lzma | Bin 0 -> 68 bytes
+ tests/files/good-0pad-empty.lzma | Bin 0 -> 36 bytes
+ tests/files/good-1-3delta-lzma2.lzma | Bin 0 -> 528 bytes
+ tests/files/good-1-block_header-1.lzma | Bin 0 -> 72 bytes
+ tests/files/good-1-block_header-2.lzma | Bin 0 -> 68 bytes
+ tests/files/good-1-block_header-3.lzma | Bin 0 -> 68 bytes
+ tests/files/good-1-check-crc32.lzma | Bin 0 -> 68 bytes
+ tests/files/good-1-check-crc64.lzma | Bin 0 -> 72 bytes
+ tests/files/good-1-check-none.lzma | Bin 0 -> 64 bytes
+ tests/files/good-1-check-sha256.lzma | Bin 0 -> 96 bytes
+ tests/files/good-1-delta-lzma2.tiff.lzma | Bin 0 -> 51312 bytes
+ tests/files/good-1-lzma2-1.lzma | Bin 0 -> 424 bytes
+ tests/files/good-1-lzma2-2.lzma | Bin 0 -> 424 bytes
+ tests/files/good-1-lzma2-3.lzma | Bin 0 -> 408 bytes
+ tests/files/good-1-sparc-lzma2.lzma | Bin 0 -> 2292 bytes
+ tests/files/good-1-x86-lzma2.lzma | Bin 0 -> 1936 bytes
+ tests/files/good-2-lzma2.lzma | Bin 0 -> 92 bytes
+ tests/files/good-cat-single-none-pad.lzma | Bin 64 -> 0 bytes
+ tests/files/good-multi-none-1.lzma | Bin 75 -> 0 bytes
+ tests/files/good-multi-none-2.lzma | Bin 53 -> 0 bytes
+ tests/files/good-multi-none-block_1.lzma | Bin 66 -> 0 bytes
+ tests/files/good-multi-none-block_2.lzma | Bin 58 -> 0 bytes
+ tests/files/good-multi-none-extra_1.lzma | Bin 51 -> 0 bytes
+ tests/files/good-multi-none-extra_2.lzma | Bin 79 -> 0 bytes
+ tests/files/good-multi-none-extra_3.lzma | Bin 55 -> 0 bytes
+ tests/files/good-multi-none-header_1.lzma | Bin 58 -> 0 bytes
+ tests/files/good-multi-none-header_2.lzma | Bin 66 -> 0 bytes
+ tests/files/good-multi-none-header_3.lzma | Bin 59 -> 0 bytes
+ tests/files/good-single-delta-lzma.tiff.lzma | Bin 51409 -> 0 bytes
+ tests/files/good-single-lzma-empty.lzma | Bin 21 -> 0 bytes
+ tests/files/good-single-lzma-flush_1.lzma | Bin 48 -> 0 bytes
+ tests/files/good-single-lzma-flush_2.lzma | Bin 63 -> 0 bytes
+ tests/files/good-single-lzma.lzma | Bin 44 -> 0 bytes
+ tests/files/good-single-none-empty_1.lzma | Bin 18 -> 0 bytes
+ tests/files/good-single-none-empty_2.lzma | Bin 26 -> 0 bytes
+ tests/files/good-single-none-empty_3.lzma | Bin 19 -> 0 bytes
+ tests/files/good-single-none-pad.lzma | Bin 32 -> 0 bytes
+ tests/files/good-single-none.lzma | Bin 30 -> 0 bytes
+ tests/files/good-single-sparc-lzma.lzma | Bin 2263 -> 0 bytes
+ tests/files/good-single-subblock-lzma.lzma | Bin 50 -> 0 bytes
+ tests/files/good-single-subblock_implicit.lzma | Bin 35 -> 0 bytes
+ tests/files/good-single-subblock_rle.lzma | Bin 118 -> 0 bytes
+ tests/files/good-single-x86-lzma.lzma | Bin 1909 -> 0 bytes
+ tests/files/malicious-multi-metadata-64PiB.lzma | Bin 51 -> 0 bytes
+ tests/files/malicious-single-subblock-256MiB.lzma | Bin 30 -> 0 bytes
+ tests/files/malicious-single-subblock-64PiB.lzma | Bin 45 -> 0 bytes
+ tests/files/malicious-single-subblock31-slow.lzma | Bin 1233 -> 0 bytes
+ tests/files/unsupported-block_header.lzma | Bin 0 -> 68 bytes
+ tests/files/unsupported-check.lzma | Bin 0 -> 68 bytes
+ tests/files/unsupported-filter_flags-1.lzma | Bin 0 -> 68 bytes
+ tests/files/unsupported-filter_flags-2.lzma | Bin 0 -> 68 bytes
+ tests/files/unsupported-filter_flags-3.lzma | Bin 0 -> 68 bytes
+ tests/test_block_header.c | 28 +-
+ tests/test_compress.sh | 4 +-
+ tests/test_filter_flags.c | 51 +-
+ tests/test_stream_flags.c | 4 +-
+ tests/tests.h | 8 +
+ 294 files changed, 9768 insertions(+), 8195 deletions(-)
+
+commit 57b9a145a527f0716822615e5ed536d33aebd3fc
+Author: Lasse Collin <lasse.collin@tukaani.org>
+Date: 2008-06-20 17:16:32 +0300
+
+ Fix test_filter_flags to match the new restriction of lc+lp.
+
+ tests/test_filter_flags.c | 3 +++
+ 1 files changed, 3 insertions(+), 0 deletions(-)
+
+commit eaafc4367c77ec1d910e16d11b4da293969d97a3
+Author: Lasse Collin <lasse.collin@tukaani.org>
+Date: 2008-06-20 16:19:54 +0300
+
+ Remove some redundant code from LZMA encoder.
+
+ src/liblzma/lzma/lzma_encoder.c | 15 +--------------
+ 1 files changed, 1 insertions(+), 14 deletions(-)
+
+commit 0809c46534fa5664fe35d9e98d95e87312ed130e
+Author: Lasse Collin <lasse.collin@tukaani.org>
+Date: 2008-06-19 16:35:08 +0300
+
+ Add limit of lc + lp <= 4. Now we can allocate the
+ literal coder as part of the main LZMA encoder or
+ decoder structure.
+
+ Make the LZMA decoder to rely on the current internal API
+ to free the allocated memory in case an error occurs.
+
+ src/liblzma/api/lzma/lzma.h | 10 +++++-
+ src/liblzma/lzma/lzma_decoder.c | 57 +++++++-----------------------
+ src/liblzma/lzma/lzma_encoder_init.c | 13 +++----
+ src/liblzma/lzma/lzma_encoder_private.h | 2 +-
+ src/liblzma/lzma/lzma_literal.c | 39 ++++-----------------
+ src/liblzma/lzma/lzma_literal.h | 13 +++----
+ 6 files changed, 43 insertions(+), 91 deletions(-)
+
+commit d25ab1b96178f06a0e724f58e3cd68300b2b1275
+Author: Lasse Collin <lasse.collin@tukaani.org>
+Date: 2008-06-18 21:45:19 +0300
+
+ Comments
+
+ src/liblzma/lzma/lzma_encoder.c | 7 ++-----
+ 1 files changed, 2 insertions(+), 5 deletions(-)
+
+commit 6368a2fa5901c75864be5171dd57a50af7adbb41
+Author: Lasse Collin <lasse.collin@tukaani.org>
+Date: 2008-06-18 19:19:02 +0300
+
+ Delete old code that was supposed to be already deleted
+ from test_block_header.c.
+
+ tests/test_block_header.c | 30 ------------------------------
+ 1 files changed, 0 insertions(+), 30 deletions(-)
+
+commit 7d17818cec8597f847b0a2537fde991bbc3d9e96
+Author: Lasse Collin <lasse.collin@tukaani.org>
+Date: 2008-06-18 18:02:10 +0300
+
+ Update the code to mostly match the new simpler file format
+ specification. Simplify things by removing most of the
+ support for known uncompressed size in most places.
+ There are some miscellaneous changes here and there too.
+
+ The API of liblzma has got many changes and still some
+ more will be done soon. While most of the code has been
+ updated, some things are not fixed (the command line tool
+ will choke with invalid filter chain, if nothing else).
+
+ Subblock filter is somewhat broken for now. It will be
+ updated once the encoded format of the Subblock filter
+ has been decided.
+
+ configure.ac | 41 +-
+ debug/full_flush.c | 16 +-
+ debug/sync_flush.c | 15 +-
+ src/common/bswap.h | 44 ++
+ src/common/integer.h | 167 +++++
+ src/liblzma/api/Makefile.am | 5 +-
+ src/liblzma/api/lzma.h | 9 +-
+ src/liblzma/api/lzma/alone.h | 32 +-
+ src/liblzma/api/lzma/auto.h | 7 +-
+ src/liblzma/api/lzma/base.h | 15 +
+ src/liblzma/api/lzma/block.h | 304 +++-------
+ src/liblzma/api/lzma/check.h | 18 +-
+ src/liblzma/api/lzma/copy.h | 29 -
+ src/liblzma/api/lzma/easy.h | 61 +--
+ src/liblzma/api/lzma/extra.h | 114 ----
+ src/liblzma/api/lzma/filter.h | 5 +-
+ src/liblzma/api/lzma/index.h | 204 +++++-
+ src/liblzma/api/lzma/index_hash.h | 94 +++
+ src/liblzma/api/lzma/info.h | 315 ---------
+ src/liblzma/api/lzma/lzma.h | 2 +-
+ src/liblzma/api/lzma/metadata.h | 100 ---
+ src/liblzma/api/lzma/raw.h | 20 +-
+ src/liblzma/api/lzma/stream.h | 157 +----
+ src/liblzma/api/lzma/stream_flags.h | 146 ++---
+ src/liblzma/api/lzma/version.h | 2 +-
+ src/liblzma/api/lzma/vli.h | 83 ++--
+ src/liblzma/check/Makefile.am | 1 -
+ src/liblzma/check/check.c | 55 ++-
+ src/liblzma/check/check.h | 47 +-
+ src/liblzma/check/check_byteswap.h | 43 --
+ src/liblzma/check/crc32_init.c | 2 +-
+ src/liblzma/check/crc64_init.c | 2 +-
+ src/liblzma/check/crc_macros.h | 2 +-
+ src/liblzma/check/sha256.c | 53 +-
+ src/liblzma/common/Makefile.am | 31 +-
+ src/liblzma/common/alignment.c | 5 +-
+ src/liblzma/common/alone_decoder.c | 77 ++-
+ src/liblzma/common/alone_encoder.c | 99 ++--
+ src/liblzma/common/auto_decoder.c | 18 +-
+ src/liblzma/common/block_decoder.c | 298 +++-------
+ src/liblzma/common/block_encoder.c | 228 ++-----
+ src/liblzma/common/block_header_decoder.c | 400 +++----------
+ src/liblzma/common/block_header_encoder.c | 207 +++----
+ src/liblzma/common/block_private.h | 51 +--
+ src/liblzma/common/block_util.c | 73 +++
+ src/liblzma/common/common.h | 44 +-
+ src/liblzma/common/copy_coder.c | 144 -----
+ src/liblzma/common/copy_coder.h | 31 -
+ src/liblzma/common/delta_common.c | 4 -
+ src/liblzma/common/delta_common.h | 4 -
+ src/liblzma/common/delta_decoder.c | 55 +--
+ src/liblzma/common/delta_encoder.c | 7 +-
+ src/liblzma/common/easy.c | 122 ++++
+ src/liblzma/common/easy_common.c | 54 --
+ src/liblzma/common/easy_common.h | 28 -
+ src/liblzma/common/easy_multi.c | 103 ---
+ src/liblzma/common/easy_single.c | 37 --
+ src/liblzma/common/extra.c | 34 -
+ src/liblzma/common/features.c | 4 -
+ src/liblzma/common/filter_flags_decoder.c | 384 +++--------
+ src/liblzma/common/filter_flags_encoder.c | 120 +---
+ src/liblzma/common/index.c | 773 ++++++++++++++++++++---
+ src/liblzma/common/index.h | 67 ++
+ src/liblzma/common/index_decoder.c | 252 ++++++++
+ src/liblzma/common/index_encoder.c | 222 +++++++
+ src/liblzma/common/index_encoder.h | 30 +
+ src/liblzma/common/index_hash.c | 340 ++++++++++
+ src/liblzma/common/info.c | 814 ------------------------
+ src/liblzma/common/memory_usage.c | 1 -
+ src/liblzma/common/metadata_decoder.c | 578 -----------------
+ src/liblzma/common/metadata_decoder.h | 31 -
+ src/liblzma/common/metadata_encoder.c | 435 -------------
+ src/liblzma/common/metadata_encoder.h | 30 -
+ src/liblzma/common/raw_common.c | 178 ++----
+ src/liblzma/common/raw_common.h | 5 +-
+ src/liblzma/common/raw_decoder.c | 19 +-
+ src/liblzma/common/raw_decoder.h | 3 +-
+ src/liblzma/common/raw_encoder.c | 101 +---
+ src/liblzma/common/raw_encoder.h | 3 +-
+ src/liblzma/common/stream_common.h | 3 +
+ src/liblzma/common/stream_decoder.c | 458 ++++----------
+ src/liblzma/common/stream_decoder.h | 28 +
+ src/liblzma/common/stream_encoder.c | 282 ++++++++
+ src/liblzma/common/stream_encoder.h | 30 +
+ src/liblzma/common/stream_encoder_multi.c | 445 -------------
+ src/liblzma/common/stream_encoder_multi.h | 26 -
+ src/liblzma/common/stream_encoder_single.c | 219 -------
+ src/liblzma/common/stream_flags_decoder.c | 260 ++-------
+ src/liblzma/common/stream_flags_encoder.c | 56 +-
+ src/liblzma/common/stream_flags_equal.c | 36 +
+ src/liblzma/common/vli_decoder.c | 68 ++-
+ src/liblzma/common/vli_encoder.c | 59 +-
+ src/liblzma/common/vli_reverse_decoder.c | 55 --
+ src/liblzma/lz/lz_decoder.c | 6 +-
+ src/liblzma/lz/lz_decoder.h | 10 +-
+ src/liblzma/lzma/lzma_decoder.c | 13 +-
+ src/liblzma/lzma/lzma_decoder.h | 10 +-
+ src/liblzma/simple/simple_coder.c | 29 +-
+ src/liblzma/simple/simple_private.h | 4 -
+ src/liblzma/subblock/subblock_decoder.c | 106 +---
+ src/liblzma/subblock/subblock_decoder_helper.c | 5 +-
+ src/liblzma/subblock/subblock_encoder.c | 8 +-
+ src/lzma/args.c | 22 +-
+ src/lzma/args.h | 2 -
+ src/lzma/error.c | 6 +
+ src/lzma/process.c | 26 +-
+ src/lzmadec/lzmadec.c | 8 +-
+ tests/Makefile.am | 5 +-
+ tests/test_block_header.c | 411 +++++--------
+ tests/test_compress.sh | 65 +--
+ tests/test_filter_flags.c | 116 ++---
+ tests/test_index.c | 504 ++++++++++++++-
+ tests/test_info.c | 717 ---------------------
+ tests/test_stream_flags.c | 134 ++--
+ tests/tests.h | 14 +-
+ 115 files changed, 4845 insertions(+), 8155 deletions(-)
+
+commit bf6348d1a3ff09fdc06940468f318f75ffa6af11
+Author: Lasse Collin <lasse.collin@tukaani.org>
+Date: 2008-06-17 15:03:46 +0300
+
+ Update the file format specification draft. The new one is
+ a lot simpler than the previous versions, but it also means
+ that the existing code will change a lot.
+
+ doc/file-format.txt | 1794 +++++++++++++++------------------------------------
+ 1 files changed, 508 insertions(+), 1286 deletions(-)
+
+commit 803194ddd26f01ff60ba4e9924c6087a56b29827
+Author: Lasse Collin <lasse.collin@tukaani.org>
+Date: 2008-06-11 21:42:47 +0300
+
+ Fix uninitialized variable in LZMA encoder. This was
+ introduced in 369f72fd656f537a9a8e06f13e6d0d4c242be22f.
+
+ src/liblzma/lzma/lzma_encoder_init.c | 2 ++
+ 1 files changed, 2 insertions(+), 0 deletions(-)
+
+commit 0ea98e52ba87453497b1355c51f13bad55c8924a
+Author: Lasse Collin <lasse.collin@tukaani.org>
+Date: 2008-06-11 15:08:44 +0300
+
+ Improve command line integer parsing a little in lzma and
+ lzmadec to make them accept also KiB in addition Ki etc.
+ Fix also memory usage information in lzmadec --help.
+
+ src/lzma/util.c | 23 ++++++++++++++---------
+ src/lzmadec/lzmadec.c | 31 ++++++++++++++++++-------------
+ 2 files changed, 32 insertions(+), 22 deletions(-)
+
+commit 436fa5fae96d4e35759aed33066060f09ee8c6ef
+Author: Lasse Collin <lasse.collin@tukaani.org>
+Date: 2008-06-10 20:36:12 +0300
+
+ s/decompressed/compressed/ in the command line tool's
+ error message.
+
+ src/lzma/main.c | 2 +-
+ 1 files changed, 1 insertions(+), 1 deletions(-)
+
+commit 369f72fd656f537a9a8e06f13e6d0d4c242be22f
+Author: Lasse Collin <lasse.collin@tukaani.org>
+Date: 2008-06-01 12:48:17 +0300
+
+ Fix a buffer overflow in the LZMA encoder. It was due to my
+ misunderstanding of the code. There's no tiny fix for this
+ problem, so I also cleaned up the code in general.
+
+ This reduces the speed of the encoder 2-5 % in the fastest
+ compression mode ("lzma -1"). High compression modes should
+ have no noticeable performance difference.
+
+ This commit breaks things (especially LZMA_SYNC_FLUSH) but I
+ will fix them once the new format and LZMA2 has been roughly
+ implemented. Plain LZMA won't support LZMA_SYNC_FLUSH at all
+ and won't be supported in the new .lzma format. This may
+ change still but this is what it looks like now.
+
+ Support for known uncompressed size (that is, LZMA or LZMA2
+ without EOPM) is likely to go away. This means there will
+ be API changes.
+
+ src/liblzma/lz/lz_encoder.c | 113 +-----
+ src/liblzma/lz/lz_encoder.h | 18 +-
+ src/liblzma/lzma/lzma_encoder.c | 551 +++++++++++-------------
+ src/liblzma/lzma/lzma_encoder_getoptimum.c | 59 ++-
+ src/liblzma/lzma/lzma_encoder_getoptimumfast.c | 4 +-
+ src/liblzma/lzma/lzma_encoder_init.c | 9 +-
+ src/liblzma/lzma/lzma_encoder_private.h | 15 +-
+ src/liblzma/rangecoder/range_encoder.h | 383 +++++++++--------
+ 8 files changed, 532 insertions(+), 620 deletions(-)
+
+commit e55e0e873ce2511325749d415ae547d62ab5f00d
+Author: Lasse Collin <lasse.collin@tukaani.org>
+Date: 2008-05-30 11:53:41 +0300
+
+ Typo fixes from meyering.
+
+ doc/faq.txt | 4 ++--
+ doc/liblzma-advanced.txt | 2 +-
+ 2 files changed, 3 insertions(+), 3 deletions(-)
+
+commit ed6664146fcbe9cc4a3b23b31632182ed812ea93
+Author: Lasse Collin <lasse.collin@tukaani.org>
+Date: 2008-05-11 14:24:42 +0300
+
+ Remove support for pre-C89 libc versions that lack memcpy,
+ memmove, and memset.
+
+ configure.ac | 2 +-
+ src/common/sysdefs.h | 15 ++-------------
+ src/liblzma/common/allocator.c | 2 +-
+ 3 files changed, 4 insertions(+), 15 deletions(-)
+
+commit b09464bf9ae694afc2d1dc26188ac4e2e8af0a63
+Author: Lasse Collin <lasse.collin@tukaani.org>
+Date: 2008-05-11 14:17:21 +0300
+
+ Improved C99 compiler detection in configure.ac. It will
+ pass -std=gnu99 instead of -std=c99 to GCC now, but -pedantic
+ should still give warnings about GNU extensions like before
+ except with some special keywords like asm().
+
+ configure.ac | 24 ++++++++++++------------
+ 1 files changed, 12 insertions(+), 12 deletions(-)
+
+commit 11de5d5267f7a0a7f0a4d34eec147e65eaf9f9cf
+Author: Lasse Collin <lasse.collin@tukaani.org>
+Date: 2008-05-06 15:15:07 +0300
+
+ Bunch of grammar fixes from meyering.
+
+ doc/liblzma-security.txt | 8 ++++----
+ src/liblzma/api/lzma/memlimit.h | 6 +++---
+ src/lzma/help.c | 2 +-
+ tests/files/README | 2 +-
+ 4 files changed, 9 insertions(+), 9 deletions(-)
+
+commit dc192b6343ae36276c85fcf7ef6006147816eadc
+Author: Lasse Collin <lasse.collin@tukaani.org>
+Date: 2008-05-06 13:41:05 +0300
+
+ Typo fix
+
+ src/liblzma/api/lzma/init.h | 2 +-
+ 1 files changed, 1 insertions(+), 1 deletions(-)
+
+commit 944b62b93239b27b338d117f2668c0e95849659b
+Author: Lasse Collin <lasse.collin@tukaani.org>
+Date: 2008-05-04 22:29:27 +0300
+
+ Don't print an error message on broken pipe unless --verbose
+ is used.
+
+ src/lzma/io.c | 15 ++++++++++++++-
+ 1 files changed, 14 insertions(+), 1 deletions(-)
+
+commit 8e074349e47ea6832b8fdf9244e581d453733433
+Author: Lasse Collin <lasse.collin@tukaani.org>
+Date: 2008-04-30 22:16:17 +0300
+
+ Fix a crash with --format=alone if other filters than LZMA
+ are specified on the command line.
+
+ src/lzma/args.c | 9 +++++++++
+ 1 files changed, 9 insertions(+), 0 deletions(-)
+
+commit 2f361ac19b7fd3abcd362de4d470e6a9eb495b73
+Author: Lasse Collin <lasse.collin@tukaani.org>
+Date: 2008-04-28 17:08:27 +0300
+
+ Updated THANKS.
+
+ THANKS | 1 +
+ 1 files changed, 1 insertions(+), 0 deletions(-)
+
+commit 3be21fb12f4cec2cf07799e8960382f4cb375369
+Author: Lasse Collin <lasse.collin@tukaani.org>
+Date: 2008-04-28 17:06:34 +0300
+
+ Fixed wrong spelling "limitter" to "limiter". This affects
+ liblzma's API.
+
+ doc/liblzma-security.txt | 14 +-
+ src/liblzma/api/lzma/base.h | 4 +-
+ src/liblzma/api/lzma/memlimit.h | 10 +-
+ src/liblzma/api/lzma/stream.h | 4 +-
+ src/liblzma/common/Makefile.am | 2 +-
+ src/liblzma/common/memory_limiter.c | 288 ++++++++++++++++++++++++++++++++++
+ src/liblzma/common/memory_limitter.c | 288 ----------------------------------
+ src/lzma/list.c | 6 +-
+ src/lzmadec/lzmadec.c | 12 +-
+ tests/test_memlimit.c | 4 +-
+ 10 files changed, 316 insertions(+), 316 deletions(-)
+
+commit beeb81060821dfec4e7898e0d44b7900dcb2215e
+Author: Lasse Collin <lasse.collin@tukaani.org>
+Date: 2008-04-25 15:39:50 +0300
+
+ Prevent LZ encoder from hanging with known uncompressed
+ size. The "fix" breaks LZMA_SYNC_FLUSH at end of stream
+ with known uncompressed size, but since it currently seems
+ likely that support for encoding with known uncompressed
+ size will go away anyway, I'm not fixing this problem now.
+
+ src/liblzma/lz/lz_encoder.c | 9 +++++++--
+ 1 files changed, 7 insertions(+), 2 deletions(-)
+
+commit c324325f9f13cdeb92153c5d00962341ba070ca2
+Author: Lasse Collin <lasse.collin@tukaani.org>
+Date: 2008-04-25 13:58:56 +0300
+
+ Removed src/liblzma/common/sysdefs.h symlink, which was
+ annoying, because "make dist" put two copies of sysdefs.h
+ into the tarball instead of the symlink.
+
+ src/liblzma/check/crc32_table.c | 2 +-
+ src/liblzma/check/crc64_table.c | 2 +-
+ src/liblzma/common/Makefile.am | 1 -
+ src/liblzma/common/common.h | 2 +-
+ src/liblzma/common/sysdefs.h | 1 -
+ 5 files changed, 3 insertions(+), 5 deletions(-)
+
+commit d3ba30243c75c13d094de1793f9c58acdbacc692
+Author: Lasse Collin <lasse.collin@tukaani.org>
+Date: 2008-04-25 13:41:29 +0300
+
+ Added memusage.c to debug directory.
+
+ debug/Makefile.am | 3 +-
+ debug/memusage.c | 55 +++++++++++++++++++++++++++++++++++++++++++++++++++++
+ 2 files changed, 57 insertions(+), 1 deletions(-)
+
+commit 8f804c29aa8471ccd6438ddca254092b8869ca52
+Author: Lasse Collin <lasse.collin@tukaani.org>
+Date: 2008-04-25 13:32:35 +0300
+
+ Bumped version number to 4.999.3alpha. It will become 5.0.0
+ once we have a stable release (won't be very soon). The
+ version number is no longer related to version of LZMA SDK.
+
+ Made some small Automake-related changes to toplevel
+ Makefile.am and configure.ac.
+
+ Makefile.am | 7 +++++--
+ README | 29 +++++++++++++++++++++++++++++
+ configure.ac | 4 ++--
+ src/liblzma/api/lzma/version.h | 22 ++++++++++------------
+ 4 files changed, 46 insertions(+), 16 deletions(-)
+
+commit c99037ea10f121cbacf60c37a36c29768ae53447
+Author: Lasse Collin <lasse.collin@tukaani.org>
+Date: 2008-04-24 20:25:39 +0300
+
+ Fix a memory leak by calling free(extra->data) in
+ lzma_extra_free().
+
+ src/liblzma/common/extra.c | 1 +
+ 1 files changed, 1 insertions(+), 0 deletions(-)
+
+commit 22ba3b0b5043fa481903482ce85015fe775939e5
+Author: Lasse Collin <lasse.collin@tukaani.org>
+Date: 2008-04-24 20:23:05 +0300
+
+ Make unlzma and lzcat symlinks.
+
+ src/lzma/Makefile.am | 12 ++++++++++++
+ 1 files changed, 12 insertions(+), 0 deletions(-)
+
+commit 17c36422d4cbc2c70d5c83ec389406f92cd9e85e
+Author: Lasse Collin <lasse.collin@tukaani.org>
+Date: 2008-04-24 20:20:27 +0300
+
+ Fixed a bug in command line option parsing.
+
+ src/lzma/options.c | 2 +-
+ 1 files changed, 1 insertions(+), 1 deletions(-)
+
+commit 283f939974c32c47f05d495e8dea455ec646ed64
+Author: Lasse Collin <lasse.collin@tukaani.org>
+Date: 2008-04-24 20:19:20 +0300
+
+ Added two assert()s.
+
+ src/liblzma/lzma/lzma_encoder.c | 4 +++-
+ 1 files changed, 3 insertions(+), 1 deletions(-)
+
+commit eb348a60b6e19a7c093f892434f23c4756973ffd
+Author: Lasse Collin <lasse.collin@tukaani.org>
+Date: 2008-04-24 19:22:53 +0300
+
+ Switch to uint16_t as the type of range coder probabilities.
+
+ src/liblzma/rangecoder/range_common.h | 25 +++++++++++++++++++------
+ 1 files changed, 19 insertions(+), 6 deletions(-)
+
+commit 6c5306e312bcfd254cf654f88c04e34ba786df3d
+Author: Lasse Collin <lasse.collin@tukaani.org>
+Date: 2008-04-24 18:39:57 +0300
+
+ Fix wrong return type (uint32_t -> bool).
+
+ src/liblzma/lz/lz_encoder.c | 2 +-
+ src/liblzma/lz/lz_encoder.h | 2 +-
+ 2 files changed, 2 insertions(+), 2 deletions(-)
+
+commit 712cfe3ebfd24df24d8896b1315c53c3bc4369c8
+Author: Lasse Collin <lasse.collin@tukaani.org>
+Date: 2008-04-24 18:38:00 +0300
+
+ Fix data corruption in LZ encoder with LZMA_SYNC_FLUSH.
+
+ src/liblzma/lz/lz_encoder.c | 16 ++++++++++++++++
+ src/liblzma/lz/lz_encoder.h | 4 ++++
+ src/liblzma/lz/match_c.h | 23 ++++++++++++++++++-----
+ 3 files changed, 38 insertions(+), 5 deletions(-)
+
+commit bc04486e368d20b3027cde625267762aae063965
+Author: Lasse Collin <lasse.collin@tukaani.org>
+Date: 2008-04-24 17:33:01 +0300
+
+ Fix fastpos problem in Makefile.am when built with --enable-small.
+
+ src/liblzma/lzma/Makefile.am | 5 ++++-
+ 1 files changed, 4 insertions(+), 1 deletions(-)
+
+commit 7ab493924e0ed590a5121a15ee54038d238880d3
+Author: Lasse Collin <lasse.collin@tukaani.org>
+Date: 2008-04-24 17:30:51 +0300
+
+ Use 64-bit integer as range encoder's cache size. This fixes a
+ theoretical data corruption, which should be very hard to trigger
+ even intentionally.
+
+ src/liblzma/rangecoder/range_encoder.h | 2 +-
+ 1 files changed, 1 insertions(+), 1 deletions(-)
+
+commit 641998c3e1ecc8b598fe0eb051fab8b9535c291b
+Author: Lasse Collin <lasse.collin@tukaani.org>
+Date: 2008-03-24 16:38:40 +0200
+
+ Replaced the range decoder optimization that used arithmetic
+ right shift with as fast version that doesn't need
+ arithmetic right shift. Removed the related check from
+ configure.ac.
+
+ configure.ac | 1 -
+ m4/ax_c_arithmetic_rshift.m4 | 36 ---------------------
+ src/liblzma/rangecoder/range_decoder.h | 53 +++++++++----------------------
+ 3 files changed, 16 insertions(+), 74 deletions(-)
+
+commit ad999efd279d95f1e7ac555b14170e8e9020488c
+Author: Lasse Collin <lasse.collin@tukaani.org>
+Date: 2008-03-22 14:39:34 +0200
+
+ Take advantage of arithmetic right shift in range decoder.
+
+ src/liblzma/rangecoder/range_decoder.h | 52 ++++++++++++++++++++++---------
+ 1 files changed, 37 insertions(+), 15 deletions(-)
+
+commit 03e0e8a0d7228b6ff1f0af39e2c040a4e425973d
+Author: Lasse Collin <lasse.collin@tukaani.org>
+Date: 2008-03-22 14:18:29 +0200
+
+ Added autoconf check to detect if we can use arithmetic
+ right shift for optimizations.
+
+ configure.ac | 1 +
+ m4/ax_c_arithmetic_rshift.m4 | 36 ++++++++++++++++++++++++++++++++++++
+ 2 files changed, 37 insertions(+), 0 deletions(-)
+
+commit 7521bbdc83acab834594a22bec50c8e1bd836298
+Author: Lasse Collin <lasse.collin@tukaani.org>
+Date: 2008-03-22 01:26:36 +0200
+
+ Update a comment to use the variable name rep_len_decoder.
+
+ (And BTW, the previous commit actually did change the
+ program logic slightly.)
+
+ src/liblzma/lzma/lzma_decoder.c | 2 +-
+ 1 files changed, 1 insertions(+), 1 deletions(-)
+
+commit 63b74d000eedaebb8485f623e56864ff5ab71064
+Author: Lasse Collin <lasse.collin@tukaani.org>
+Date: 2008-03-22 00:57:33 +0200
+
+ Demystified the "state" variable in LZMA code. Use the
+ word literal instead of char for better consistency.
+ There are still some names with _char instead of _literal
+ in lzma_optimum, these may be changed later.
+
+ Renamed length coder variables.
+
+ This commit doesn't change the program logic.
+
+ src/liblzma/lzma/lzma_common.h | 69 +++++++++++++++++++++-------
+ src/liblzma/lzma/lzma_decoder.c | 47 ++++++++++---------
+ src/liblzma/lzma/lzma_encoder.c | 14 +++---
+ src/liblzma/lzma/lzma_encoder_getoptimum.c | 34 +++++++-------
+ src/liblzma/lzma/lzma_encoder_init.c | 5 +-
+ src/liblzma/lzma/lzma_encoder_private.h | 8 ++--
+ 6 files changed, 107 insertions(+), 70 deletions(-)
+
+commit e6eb0a26757e851cef62b9440319a8e73b015cb9
+Author: Lasse Collin <lasse.collin@tukaani.org>
+Date: 2008-03-14 23:16:11 +0200
+
+ Fix data corruption in LZMA encoder. Note that this bug was
+ specific to liblzma and was *not* present in LZMA SDK.
+
+ src/liblzma/lzma/lzma_encoder.c | 4 ++++
+ 1 files changed, 4 insertions(+), 0 deletions(-)
+
+commit 7d516f5129e4373a6d57249d7f608c634c66bf12
+Author: Lasse Collin <lasse.collin@tukaani.org>
+Date: 2008-03-14 21:32:37 +0200
+
+ Fix a comment API header.
+
+ src/liblzma/api/lzma/lzma.h | 2 +-
+ 1 files changed, 1 insertions(+), 1 deletions(-)
+
+commit 748d6e4274921a350bd0a317380309717441ef9c
+Author: Lasse Collin <lasse.collin@tukaani.org>
+Date: 2008-03-12 23:14:50 +0200
+
+ Make lzma_stream.next_in const. Let's see if anyone complains.
+
+ src/liblzma/api/lzma/base.h | 2 +-
+ 1 files changed, 1 insertions(+), 1 deletions(-)
+
+commit bfde3b24a5ae25ce53c854762b6148952386b025
+Author: Lasse Collin <lasse.collin@tukaani.org>
+Date: 2008-03-11 15:35:34 +0200
+
+ Apply a minor speed optimization to LZMA decoder.
+
+ src/liblzma/lzma/lzma_decoder.c | 85 ++++++++++++++++++++-------------------
+ 1 files changed, 43 insertions(+), 42 deletions(-)
+
+commit f310c50286d9e4e9c6170bb65348c9bb430a65b4
+Author: Lasse Collin <lasse.collin@tukaani.org>
+Date: 2008-03-11 15:17:16 +0200
+
+ Initialize the last byte of the dictionary to zero so that
+ lz_get_byte(lz, 0) returns zero. This was broken by
+ 1a3b21859818e4d8e89a1da99699233c1bfd197d.
+
+ src/liblzma/lz/lz_decoder.c | 1 +
+ 1 files changed, 1 insertions(+), 0 deletions(-)
+
+commit 5ead36cf7f823093672a4e43c3180b38c9abbaff
+Author: Lasse Collin <lasse.collin@tukaani.org>
+Date: 2008-03-10 15:57:55 +0200
+
+ Really fix the price count initialization.
+
+ src/liblzma/lzma/lzma_encoder_init.c | 4 ++--
+ 1 files changed, 2 insertions(+), 2 deletions(-)
+
+commit d4d7feb83d1a1ded8f662a82e21e053841ca726c
+Author: Lasse Collin <lasse.collin@tukaani.org>
+Date: 2008-03-10 13:47:17 +0200
+
+ Updated THANKS.
+
+ THANKS | 1 +
+ 1 files changed, 1 insertions(+), 0 deletions(-)
+
+commit 0541c5ea63ef3c0ff85eeddb0a420e56b0c65258
+Author: Lasse Collin <lasse.collin@tukaani.org>
+Date: 2008-03-10 13:46:48 +0200
+
+ Initialize align_price_count and match_price_count in
+ lzma_encoder_init.c. While we don't call
+ fill_distances_prices() and fill_align_prices() in
+ lzma_lzma_encoder_init(), we still need to initialize
+ these two variables so that the fill functions get
+ called in lzma_encoder_getoptimum.c in the beginning
+ of a stream.
+
+ src/liblzma/lzma/lzma_encoder_init.c | 2 ++
+ 1 files changed, 2 insertions(+), 0 deletions(-)
+
+commit 596fa1fac72823e4ef5bc26bb53f9090445bf748
+Author: Lasse Collin <lasse.collin@tukaani.org>
+Date: 2008-03-10 13:44:29 +0200
+
+ Always initialize lz->temp_size in lz_decoder.c. temp_size did
+ get initialized as a side-effect after allocating a new decoder,
+ but not when the decoder was reused.
+
+ src/liblzma/lz/lz_decoder.c | 11 ++++++-----
+ 1 files changed, 6 insertions(+), 5 deletions(-)
+
+commit 45e43e169527e7a98a8c8a821d37bf25822b764d
+Author: Lasse Collin <lasse.collin@tukaani.org>
+Date: 2008-03-10 13:41:25 +0200
+
+ Don't fill allocated memory with 0xFD when debugging is
+ enabled. It hides errors from Valgrind.
+
+ src/liblzma/common/allocator.c | 7 ++++---
+ 1 files changed, 4 insertions(+), 3 deletions(-)
+
+commit c0e19e0662205f81a86da8903cdc325d50635870
+Author: Lasse Collin <lasse.collin@tukaani.org>
+Date: 2008-02-28 10:24:31 +0200
+
+ Remove two redundant validity checks from the LZMA decoder.
+ These are already checked elsewhere, so omitting these
+ gives (very) tiny speed up.
+
+ src/liblzma/lzma/lzma_decoder.c | 23 ++++-------------------
+ 1 files changed, 4 insertions(+), 19 deletions(-)
+
+commit de7485806284d1614095ae8cb2ebbb5d74c9ac45
+Author: Lasse Collin <lasse.collin@tukaani.org>
+Date: 2008-02-06 13:25:32 +0200
+
+ Tiny clean up to file-format.txt.
+
+ doc/file-format.txt | 6 +++---
+ 1 files changed, 3 insertions(+), 3 deletions(-)
+
+commit 1a3b21859818e4d8e89a1da99699233c1bfd197d
+Author: Lasse Collin <lasse.collin@tukaani.org>
+Date: 2008-02-02 14:51:06 +0200
+
+ Don't memzero() the history buffer when initializing LZ
+ decoder. There's no danger of information leak here, so
+ it isn't required. Doing memzero() takes a lot of time
+ with large dictionaries, which could make it easier to
+ construct DoS attack to consume too much CPU time.
+
+ src/liblzma/lz/lz_decoder.c | 7 +++----
+ 1 files changed, 3 insertions(+), 4 deletions(-)
+
+commit 7e796e312bf644ea95aea0ff85480f47cfa30fc0
+Author: Lasse Collin <lasse.collin@tukaani.org>
+Date: 2008-02-01 08:39:26 +0200
+
+ Do uncompressed size validation in raw encoder. This way
+ it gets done for not only raw encoder, but also Block
+ and LZMA_Alone encoders.
+
+ src/liblzma/common/raw_encoder.c | 90 ++++++++++++++++++++++++++++++-------
+ 1 files changed, 73 insertions(+), 17 deletions(-)
+
+commit 7dd48578a3853e0cfab9f1830bc30927173ec4bc
+Author: Lasse Collin <lasse.collin@tukaani.org>
+Date: 2008-02-01 08:32:05 +0200
+
+ Avoid unneeded function call in raw_common.c.
+
+ src/liblzma/common/raw_common.c | 20 +++++++++++---------
+ 1 files changed, 11 insertions(+), 9 deletions(-)
+
+commit b596fac963c3ff96f615d4d9b427a213ec341211
+Author: Lasse Collin <lasse.collin@tukaani.org>
+Date: 2008-01-26 21:42:38 +0200
+
+ Updated THANKS.
+
+ THANKS | 1 +
+ 1 files changed, 1 insertions(+), 0 deletions(-)
+
+commit e9f6e9c075ad93141a568d94f7d4eb0f2edbd6c2
+Author: Lasse Collin <lasse.collin@tukaani.org>
+Date: 2008-01-26 21:40:23 +0200
+
+ Added note.GNU-stack to x86 assembler files. It is needed
+ when using non-executable stack.
+
+ src/liblzma/check/crc32_x86.S | 9 +++++++++
+ src/liblzma/check/crc64_x86.S | 9 +++++++++
+ 2 files changed, 18 insertions(+), 0 deletions(-)
+
+commit 4c7ad179c78f97f68ad548cb40a9dfa6871655ae
+Author: Lasse Collin <lasse.collin@tukaani.org>
+Date: 2008-01-26 19:12:50 +0200
+
+ Added api/lzma/easy.h. I had forgot to add this to the
+ git repo. Thanks to Stephan Kulow.
+
+ src/liblzma/api/lzma/easy.h | 174 +++++++++++++++++++++++++++++++++++++++++++
+ 1 files changed, 174 insertions(+), 0 deletions(-)
+
+commit 288b232f54c3692cd36f471d4042f51daf3ea79f
+Author: Lasse Collin <lasse.collin@tukaani.org>
+Date: 2008-01-26 11:09:17 +0200
+
+ Added more test files.
+
+ tests/files/README | 11 +++++++++++
+ tests/files/bad-multi-none-header_7.lzma | Bin 0 -> 59 bytes
+ tests/files/good-single-sparc-lzma.lzma | Bin 0 -> 2263 bytes
+ tests/files/good-single-x86-lzma.lzma | Bin 0 -> 1909 bytes
+ 4 files changed, 11 insertions(+), 0 deletions(-)
+
+commit c467b0defccf233d0c79234407bc38d7d09574d3
+Author: Lasse Collin <lasse.collin@tukaani.org>
+Date: 2008-01-26 10:47:55 +0200
+
+ Added more test files.
+
+ tests/files/README | 6 ++++++
+ tests/files/bad-multi-none-block_3.lzma | Bin 0 -> 58 bytes
+ tests/files/good-multi-none-block_2.lzma | Bin 0 -> 58 bytes
+ 3 files changed, 6 insertions(+), 0 deletions(-)
+
+commit f9842f712732c482f2def9f24437851e57dd83f8
+Author: Lasse Collin <lasse.collin@tukaani.org>
+Date: 2008-01-26 00:25:34 +0200
+
+ Return LZMA_HEADER_ERROR if LZMA_SYNC_FLUSH is used with any
+ of the so called simple filters. If there is demand, limited
+ support for LZMA_SYNC_FLUSH may be added in future.
+
+ After this commit, using LZMA_SYNC_FLUSH shouldn't cause
+ undefined behavior in any situation.
+
+ src/liblzma/api/lzma/simple.h | 9 +++++++++
+ src/liblzma/simple/simple_coder.c | 8 ++++++++
+ 2 files changed, 17 insertions(+), 0 deletions(-)
+
+commit e988ea1d1a286dd0f27af0657f9665d5cd8573aa
+Author: Lasse Collin <lasse.collin@tukaani.org>
+Date: 2008-01-25 23:50:35 +0200
+
+ Added more Multi-Block test files. Improved some
+ descriptions in the test files' README.
+
+ tests/files/README | 34 ++++++++++++++++++++++++-----
+ tests/files/bad-multi-none-block_1.lzma | Bin 0 -> 66 bytes
+ tests/files/bad-multi-none-block_2.lzma | Bin 0 -> 66 bytes
+ tests/files/good-multi-none-block_1.lzma | Bin 0 -> 66 bytes
+ 4 files changed, 28 insertions(+), 6 deletions(-)
+
+commit 4441e004185cd4c61bda184010eca5924c9dec87
+Author: Lasse Collin <lasse.collin@tukaani.org>
+Date: 2008-01-25 23:12:36 +0200
+
+ Combine lzma_options_block validation needed by both Block
+ encoder and decoder, and put the shared things to
+ block_private.h. Improved the checks a little so that
+ they may detect too big Compressed Size at initialization
+ time if lzma_options_block.total_size or .total_limit is
+ known.
+
+ Allow encoding and decoding Blocks with combinations of
+ fields that are not allowed by the file format specification.
+ Doing this requires that the application passes such a
+ combination in lzma_options_lzma; liblzma doesn't do that,
+ but it's not impossible that someone could find them useful
+ in some custom file format.
+
+ src/liblzma/common/block_decoder.c | 37 +++++++++++----------------
+ src/liblzma/common/block_encoder.c | 32 ++++------------------
+ src/liblzma/common/block_private.h | 50 ++++++++++++++++++++++++++++++++++++
+ 3 files changed, 71 insertions(+), 48 deletions(-)
+
+commit bf4200c818fcf9102e56328d39cde91bfa13cfb6
+Author: Lasse Collin <lasse.collin@tukaani.org>
+Date: 2008-01-25 19:21:22 +0200
+
+ Added test_memlimit.c.
+
+ tests/Makefile.am | 2 +
+ tests/test_memlimit.c | 114 +++++++++++++++++++++++++++++++++++++++++++++++++
+ 2 files changed, 116 insertions(+), 0 deletions(-)
+
+commit 7b8fc7e6b501a32a36636dac79ecb57099269005
+Author: Lasse Collin <lasse.collin@tukaani.org>
+Date: 2008-01-25 19:20:28 +0200
+
+ Improved the memory limitter:
+ - Added lzma_memlimit_max() and lzma_memlimit_reached()
+ API functions.
+ - Added simple estimation of malloc()'s memory usage
+ overhead.
+ - Fixed integer overflow detection in lzma_memlimit_alloc().
+ - Made some white space cleanups and added more comments.
+
+ The description of lzma_memlimit_max() in memlimit.h is bad
+ and should be improved.
+
+ src/liblzma/api/lzma/memlimit.h | 35 ++++++++++++
+ src/liblzma/common/memory_limitter.c | 97 +++++++++++++++++++++++++++++-----
+ 2 files changed, 118 insertions(+), 14 deletions(-)
+
+commit e0c3d0043da2f670cfdb1abbb3223d5a594ad8db
+Author: Lasse Collin <lasse.collin@tukaani.org>
+Date: 2008-01-25 13:55:52 +0200
+
+ Use more parenthesis in succeed() macro in tests/tests.h.
+
+ tests/tests.h | 2 +-
+ 1 files changed, 1 insertions(+), 1 deletions(-)
+
+commit 1fd76d488179580d37f31ee11948f4932aed31fd
+Author: Lasse Collin <lasse.collin@tukaani.org>
+Date: 2008-01-24 14:49:34 +0200
+
+ Added more Multi-Block Stream test files.
+
+ tests/files/README | 23 +++++++++++++++++++++++
+ tests/files/bad-multi-none-header_2.lzma | Bin 0 -> 61 bytes
+ tests/files/bad-multi-none-header_3.lzma | Bin 0 -> 59 bytes
+ tests/files/bad-multi-none-header_4.lzma | Bin 0 -> 59 bytes
+ tests/files/bad-multi-none-header_5.lzma | Bin 0 -> 58 bytes
+ tests/files/bad-multi-none-header_6.lzma | Bin 0 -> 59 bytes
+ tests/files/good-multi-none-header_3.lzma | Bin 0 -> 59 bytes
+ 7 files changed, 23 insertions(+), 0 deletions(-)
+
+commit 6e27b1098a28f4ce09bfa6df68ad94182dfc2936
+Author: Lasse Collin <lasse.collin@tukaani.org>
+Date: 2008-01-24 00:46:05 +0200
+
+ Added bunch of test files containing Multi-Block Streams.
+
+ tests/files/README | 53 +++++++++++++++++++++++++++++
+ tests/files/bad-multi-none-1.lzma | Bin 0 -> 54 bytes
+ tests/files/bad-multi-none-2.lzma | Bin 0 -> 53 bytes
+ tests/files/bad-multi-none-3.lzma | Bin 0 -> 53 bytes
+ tests/files/bad-multi-none-extra_1.lzma | Bin 0 -> 54 bytes
+ tests/files/bad-multi-none-extra_2.lzma | Bin 0 -> 54 bytes
+ tests/files/bad-multi-none-extra_3.lzma | Bin 0 -> 55 bytes
+ tests/files/bad-multi-none-header_1.lzma | Bin 0 -> 57 bytes
+ tests/files/bad-multi-none-index_1.lzma | Bin 0 -> 51 bytes
+ tests/files/bad-multi-none-index_2.lzma | Bin 0 -> 49 bytes
+ tests/files/bad-multi-none-index_3.lzma | Bin 0 -> 51 bytes
+ tests/files/bad-multi-none-index_4.lzma | Bin 0 -> 51 bytes
+ tests/files/good-multi-none-1.lzma | Bin 0 -> 75 bytes
+ tests/files/good-multi-none-2.lzma | Bin 0 -> 53 bytes
+ tests/files/good-multi-none-extra_1.lzma | Bin 0 -> 51 bytes
+ tests/files/good-multi-none-extra_2.lzma | Bin 0 -> 79 bytes
+ tests/files/good-multi-none-extra_3.lzma | Bin 0 -> 55 bytes
+ tests/files/good-multi-none-header_1.lzma | Bin 0 -> 58 bytes
+ tests/files/good-multi-none-header_2.lzma | Bin 0 -> 66 bytes
+ 19 files changed, 53 insertions(+), 0 deletions(-)
+
+commit db9df0a9609c01a00a227329fb96e983971040f5
+Author: Lasse Collin <lasse.collin@tukaani.org>
+Date: 2008-01-23 23:43:00 +0200
+
+ Fix decoding of empty Metadata Blocks, that don't have
+ even the Metadata Flags field. Earlier the code allowed
+ such files; now they are prohibited as the file format
+ specification requires.
+
+ src/liblzma/common/metadata_decoder.c | 4 +++-
+ 1 files changed, 3 insertions(+), 1 deletions(-)
+
+commit 765f0b05f6e95ed9194fb90819cee189ebbac36b
+Author: Lasse Collin <lasse.collin@tukaani.org>
+Date: 2008-01-23 23:38:18 +0200
+
+ Fix a bug related to 99e12af4e2b866c011fe0106cd1e0bfdcc8fe9c6.
+ lzma_metadata.header_metadata_size was not properly set to
+ zero if the Metadata had only the Metadata Flags field.
+
+ src/liblzma/common/metadata_decoder.c | 13 +++++++------
+ 1 files changed, 7 insertions(+), 6 deletions(-)
+
+commit 3a7cc5c3dec7b078941f961b0393b86c418883b6
+Author: Lasse Collin <lasse.collin@tukaani.org>
+Date: 2008-01-23 23:35:49 +0200
+
+ Fix decoding of Extra Records that have empty Data.
+
+ src/liblzma/common/metadata_decoder.c | 13 ++++++++++++-
+ 1 files changed, 12 insertions(+), 1 deletions(-)
+
+commit e5fdec93e273855c1bcc2579b83cfb481a9a1492
+Author: Lasse Collin <lasse.collin@tukaani.org>
+Date: 2008-01-23 22:02:38 +0200
+
+ Add the trailing '\0' to lzma_extra.data as the API header
+ already documents.
+
+ src/liblzma/common/metadata_decoder.c | 4 +++-
+ 1 files changed, 3 insertions(+), 1 deletions(-)
+
+commit ed40dc5a2c28a8dfccab8c165b3780738eeef93e
+Author: Lasse Collin <lasse.collin@tukaani.org>
+Date: 2008-01-23 21:21:21 +0200
+
+ Added debug/full_flush.c.
+
+ debug/Makefile.am | 3 +-
+ debug/full_flush.c | 105 ++++++++++++++++++++++++++++++++++++++++++++++++++++
+ 2 files changed, 107 insertions(+), 1 deletions(-)
+
+commit ae0cd09a666a1682da8fc09487322227679e218d
+Author: Lasse Collin <lasse.collin@tukaani.org>
+Date: 2008-01-23 21:05:33 +0200
+
+ Return LZMA_STREAM_END instead of LZMA_OK if
+ LZMA_SYNC_FLUSH or LZMA_FULL_FLUSH is used when
+ there's no unfinished Block open.
+
+ src/liblzma/common/stream_encoder_multi.c | 6 +++++-
+ 1 files changed, 5 insertions(+), 1 deletions(-)
+
+commit 0e80ded13dfceb98f9494cbb5381a95eb44d03db
+Author: Lasse Collin <lasse.collin@tukaani.org>
+Date: 2008-01-23 20:05:01 +0200
+
+ Added bad-single-none-footer_filter_flags.lzma and
+ bad-single-none-too_long_vli.lzma.
+
+ tests/files/README | 5 +++++
+ .../files/bad-single-none-footer_filter_flags.lzma | Bin 0 -> 30 bytes
+ tests/files/bad-single-none-too_long_vli.lzma | Bin 0 -> 39 bytes
+ 3 files changed, 5 insertions(+), 0 deletions(-)
+
+commit 8c8eb14055d8dd536b1b1c58fb284d34bb8ed1dd
+Author: Lasse Collin <lasse.collin@tukaani.org>
+Date: 2008-01-23 13:42:35 +0200
+
+ Fixed a typo.
+
+ src/liblzma/subblock/subblock_decoder_helper.c | 2 +-
+ 1 files changed, 1 insertions(+), 1 deletions(-)
+
+commit 980f65a9a10160c4d105767871e3002b9aaba3e0
+Author: Lasse Collin <lasse.collin@tukaani.org>
+Date: 2008-01-23 13:40:45 +0200
+
+ Fix a memory leak in the Subblock encoder.
+
+ src/liblzma/subblock/subblock_encoder.c | 1 +
+ 1 files changed, 1 insertions(+), 0 deletions(-)
+
+commit 99e12af4e2b866c011fe0106cd1e0bfdcc8fe9c6
+Author: Lasse Collin <lasse.collin@tukaani.org>
+Date: 2008-01-23 13:36:07 +0200
+
+ Fix Size of Header Metadata Block handling. Now
+ lzma_metadata.header_metadata_size == LZMA_VLI_VALUE_UNKNOWN
+ is not allowed at all. To indicate missing Header Metadata
+ Block, header_metadata_size must be set to zero. This is
+ what Metadata decoder does after this patch too.
+
+ Note that other missing fields in lzma_metadata are still
+ indicated with LZMA_VLI_VALUE_UNKNOWN. This isn't as
+ illogical as it sounds at first, because missing Size of
+ Header Metadata Block means that Header Metadata Block is
+ not present in the Stream. With other Metadata fields,
+ a missing field means only that the value is unknown.
+
+ src/liblzma/common/info.c | 13 ++++---------
+ src/liblzma/common/metadata_decoder.c | 6 ++++++
+ src/liblzma/common/metadata_encoder.c | 11 +++++------
+ tests/test_info.c | 4 ++--
+ 4 files changed, 17 insertions(+), 17 deletions(-)
+
+commit 58b78ab20c1bcced45cf71ae6684868fc90b4b81
+Author: Lasse Collin <lasse.collin@tukaani.org>
+Date: 2008-01-23 13:15:55 +0200
+
+ Fix a memory leak in metadata_decoder.c.
+
+ src/liblzma/common/metadata_decoder.c | 1 +
+ 1 files changed, 1 insertions(+), 0 deletions(-)
+
+commit 4d8cdbdab44400fd98f0f18a0f701e27cd1acdae
+Author: Lasse Collin <lasse.collin@tukaani.org>
+Date: 2008-01-23 13:13:58 +0200
+
+ Fix the fix 863028cb7ad6d8d0455fa69348f56b376d7b908f which
+ just moved to problem. Now it's really fixed.
+
+ src/liblzma/common/info.c | 5 ++++-
+ 1 files changed, 4 insertions(+), 1 deletions(-)
+
+commit 67321de963ccf69410b3868b8e31534fe18a90de
+Author: Lasse Collin <lasse.collin@tukaani.org>
+Date: 2008-01-23 00:21:04 +0200
+
+ Take advantage of return_if_error() macro in
+ lzma_info_metadata_set() in info.c.
+
+ src/liblzma/common/info.c | 24 ++++++++----------------
+ 1 files changed, 8 insertions(+), 16 deletions(-)
+
+commit 863028cb7ad6d8d0455fa69348f56b376d7b908f
+Author: Lasse Collin <lasse.collin@tukaani.org>
+Date: 2008-01-23 00:18:32 +0200
+
+ Fixed a dangling pointer that caused invalid free().
+
+ src/liblzma/common/info.c | 1 +
+ 1 files changed, 1 insertions(+), 0 deletions(-)
+
+commit cf49f42a6bd40143f54a6b10d6e605599e958c0b
+Author: Lasse Collin <lasse.collin@tukaani.org>
+Date: 2008-01-22 22:49:24 +0200
+
+ Added lzma_easy_* functions. These should make using
+ liblzma as easy as using zlib, because the easy API
+ don't require developers to know any fancy LZMA options.
+
+ Note that Multi-Block Stream encoding is currently broken.
+ The easy API should be OK, the bug(s) are elsewhere.
+
+ src/liblzma/api/Makefile.am | 1 +
+ src/liblzma/api/lzma.h | 1 +
+ src/liblzma/common/Makefile.am | 5 ++
+ src/liblzma/common/easy_common.c | 54 +++++++++++++++
+ src/liblzma/common/easy_common.h | 28 ++++++++
+ src/liblzma/common/easy_multi.c | 103 +++++++++++++++++++++++++++++
+ src/liblzma/common/easy_single.c | 37 ++++++++++
+ src/liblzma/common/stream_encoder_multi.c | 3 +-
+ src/liblzma/common/stream_encoder_multi.h | 26 +++++++
+ 9 files changed, 256 insertions(+), 2 deletions(-)
+
+commit 1747b85a43abc1c3f152dbd349be2ef4089ecf6a
+Author: Lasse Collin <lasse.collin@tukaani.org>
+Date: 2008-01-22 21:16:22 +0200
+
+ Fix Multi-Block Stream encoder's EOPM usage.
+
+ src/liblzma/common/stream_encoder_multi.c | 2 +-
+ 1 files changed, 1 insertions(+), 1 deletions(-)
+
+commit 0ed6f1adcea540fb9593ca115d36de537f7f0dc6
+Author: Lasse Collin <lasse.collin@tukaani.org>
+Date: 2008-01-22 00:15:11 +0200
+
+ Made lzma_extra pointers const in lzma_options_stream.
+
+ src/liblzma/api/lzma/stream.h | 4 ++--
+ src/liblzma/common/stream_encoder_multi.c | 8 ++++++--
+ 2 files changed, 8 insertions(+), 4 deletions(-)
+
+commit 305afa38f64c75af8e81c4167e2d8fa8d85b53a4
+Author: Lasse Collin <lasse.collin@tukaani.org>
+Date: 2008-01-20 20:15:21 +0200
+
+ Updated debug/sync_flush.c.
+
+ debug/sync_flush.c | 26 ++++++++++++++++++++++++--
+ 1 files changed, 24 insertions(+), 2 deletions(-)
+
+commit d53e9b77054cfade6a643e77d085273a348b189c
+Author: Lasse Collin <lasse.collin@tukaani.org>
+Date: 2008-01-20 20:14:26 +0200
+
+ Added debug/repeat.c.
+
+ debug/Makefile.am | 1 +
+ debug/repeat.c | 43 +++++++++++++++++++++++++++++++++++++++++++
+ 2 files changed, 44 insertions(+), 0 deletions(-)
+
+commit 107259e306bcfc2336a0fb870fb58034c28faa52
+Author: Lasse Collin <lasse.collin@tukaani.org>
+Date: 2008-01-20 20:12:58 +0200
+
+ Fix alignment handling bugs in Subblock encoder.
+
+ This leaves one known alignment bug unfixed: If repeat count
+ doesn't fit into 28-bit integer, the encoder has to split
+ this to multiple Subblocks with Subblock Type `Repeating Data'.
+ The extra Subblocks may have wrong alignment. Correct alignment
+ is restored after the split Repeating Data has been completely
+ written out.
+
+ Since the encoder doesn't even try to fix the alignment unless
+ the size of Data is at least 4 bytes, to trigger this bug you
+ need at least 4 GiB of repeating data with sequence length of
+ 4 or more bytes. Since the worst thing done by this bug is
+ misaligned data (no data corruption), this bug simply isn't
+ worth fixing, because a proper fix isn't simple.
+
+ src/liblzma/subblock/subblock_encoder.c | 170 +++++++++++++++++++++---------
+ 1 files changed, 119 insertions(+), 51 deletions(-)
+
+commit e141fe18950400faaa3503ff88ac20eacd73e88c
+Author: Lasse Collin <lasse.collin@tukaani.org>
+Date: 2008-01-19 21:16:33 +0200
+
+ Implemented LZMA_SYNC_FLUSH support to the Subblock encoder.
+ The API for handing Subfilters was changed to make it
+ consistent with LZMA_SYNC_FLUSH.
+
+ A few sanity checks were added for Subfilter handling. Some
+ small bugs were fixed. More comments were added.
+
+ src/liblzma/api/lzma/subblock.h | 29 ++--
+ src/liblzma/subblock/subblock_encoder.c | 263 +++++++++++++++++++++++--------
+ 2 files changed, 214 insertions(+), 78 deletions(-)
+
+commit 23c227a864a3b69f38c6a74306161d4e6918d1cc
+Author: Lasse Collin <lasse.collin@tukaani.org>
+Date: 2008-01-19 15:19:21 +0200
+
+ Revised the Delta filter implementation. The initialization
+ function is still shared between encoder and decoder, but the
+ actual coding is in separate files for encoder and decoder.
+
+ There are now separate functions for the actual delta
+ calculation depending on if Delta is the last filter in the
+ chain or not. If it is the last, the new code copies the
+ data from input to output buffer and does the delta
+ calculation at the same time. The old code first copied the
+ data, then did the delta in the target buffer, which required
+ reading through the data twice.
+
+ Support for LZMA_SYNC_FLUSH was added to the Delta encoder.
+ This doesn't change anything in the file format.
+
+ src/liblzma/common/Makefile.am | 14 +++-
+ src/liblzma/common/delta_coder.c | 189 ------------------------------------
+ src/liblzma/common/delta_coder.h | 31 ------
+ src/liblzma/common/delta_common.c | 70 +++++++++++++
+ src/liblzma/common/delta_common.h | 48 +++++++++
+ src/liblzma/common/delta_decoder.c | 102 +++++++++++++++++++
+ src/liblzma/common/delta_decoder.h | 28 ++++++
+ src/liblzma/common/delta_encoder.c | 97 ++++++++++++++++++
+ src/liblzma/common/delta_encoder.h | 28 ++++++
+ src/liblzma/common/raw_decoder.c | 2 +-
+ src/liblzma/common/raw_encoder.c | 2 +-
+ 11 files changed, 387 insertions(+), 224 deletions(-)
+
+commit 61dc82f3e306b25ce3cd3d529df9ec7a0ec04b73
+Author: Lasse Collin <lasse.collin@tukaani.org>
+Date: 2008-01-18 20:18:08 +0200
+
+ Added the debug directory and the first debug tool
+ (sync_flush). These tools are not built unless the
+ user runs "make" in the debug directory.
+
+ Makefile.am | 1 +
+ configure.ac | 1 +
+ debug/Makefile.am | 30 +++++++++++++
+ debug/README | 17 ++++++++
+ debug/sync_flush.c | 116 ++++++++++++++++++++++++++++++++++++++++++++++++++++
+ 5 files changed, 165 insertions(+), 0 deletions(-)
+
+commit 0ae3208db94585eb8294b97ded387de0a3a07646
+Author: Lasse Collin <lasse.collin@tukaani.org>
+Date: 2008-01-18 20:13:00 +0200
+
+ Added test files to test usage of flush marker in LZMA.
+
+ tests/files/README | 12 ++++++++++++
+ tests/files/bad-single-lzma-flush_beginning.lzma | Bin 0 -> 53 bytes
+ tests/files/bad-single-lzma-flush_twice.lzma | Bin 0 -> 63 bytes
+ tests/files/good-single-lzma-flush_1.lzma | Bin 0 -> 48 bytes
+ tests/files/good-single-lzma-flush_2.lzma | Bin 0 -> 63 bytes
+ 5 files changed, 12 insertions(+), 0 deletions(-)
+
+commit ab5feaf1fcc146ef9fd39360c53c290bec39524e
+Author: Lasse Collin <lasse.collin@tukaani.org>
+Date: 2008-01-18 20:02:52 +0200
+
+ Fix LZMA_SYNC_FLUSH handling in LZ and LZMA encoders.
+ That code is now almost completely in LZ coder, where
+ it can be shared with other LZ77-based algorithms in
+ future.
+
+ src/liblzma/lz/lz_encoder.c | 34 ++++++++++++++++++++++++++--------
+ src/liblzma/lz/lz_encoder.h | 1 +
+ src/liblzma/lzma/lzma_encoder.c | 27 ++-------------------------
+ 3 files changed, 29 insertions(+), 33 deletions(-)
+
+commit 079c4f7fc26b3d0b33d9ae7536697b45f3b73585
+Author: Lasse Collin <lasse.collin@tukaani.org>
+Date: 2008-01-18 17:21:24 +0200
+
+ Don't add -g to CFLAGS when --enable-debug is specified.
+ It's the job of the user to put that in CFLAGS.
+
+ configure.ac | 1 -
+ 1 files changed, 0 insertions(+), 1 deletions(-)
+
+commit 61d1784d8f1761d979a6da6e223e279ca33815e6
+Author: Lasse Collin <lasse.collin@tukaani.org>
+Date: 2008-01-18 14:17:37 +0200
+
+ Set stdin and stdout to binary mode on Windows. This patch is
+ a forward port of b7b22fcb979a16d3a47c8001f058c9f7d4416068
+ from lzma-utils-legacy.git. I don't know if the new code base
+ builds on Windows, but this is a start.
+
+ src/lzmadec/lzmadec.c | 9 +++++++++
+ 1 files changed, 9 insertions(+), 0 deletions(-)
+
+commit c9cba976913e55ff9aac8a8133cc94416c7c1c9c
+Author: Lasse Collin <lasse.collin@tukaani.org>
+Date: 2008-01-18 00:50:29 +0200
+
+ Added test_compress.sh and bunch of files needed by it.
+ This new set of tests compress and decompress several
+ test files with many different compression options.
+ This set of tests will be extended later.
+
+ tests/Makefile.am | 30 ++++--
+ tests/bcj_test.c | 66 +++++++++++++
+ tests/compress_prepared_bcj_sparc | Bin 0 -> 6804 bytes
+ tests/compress_prepared_bcj_x86 | Bin 0 -> 4649 bytes
+ tests/create_compress_files.c | 164 +++++++++++++++++++++++++++++++++
+ tests/test_compress.sh | 183 +++++++++++++++++++++++++++++++++++++
+ 6 files changed, 433 insertions(+), 10 deletions(-)
+
+commit 33be3c0e24d8f43376ccf71cc77d53671e792f07
+Author: Lasse Collin <lasse.collin@tukaani.org>
+Date: 2008-01-17 18:56:53 +0200
+
+ Subblock decoder: Don't exit the main loop in decode_buffer()
+ too early if we hit End of Input while decoding a Subblock of
+ type Repeating Data. To keep the loop termination condition
+ elegant, the order of enumerations in coder->sequence were
+ changed.
+
+ To keep the case-labels in roughly the same order as the
+ enumerations in coder->sequence, large chunks of code was
+ moved around. This made the diff big and ugly compared to
+ the amount of the actual changes made.
+
+ src/liblzma/subblock/subblock_decoder.c | 272 ++++++++++++++++---------------
+ 1 files changed, 139 insertions(+), 133 deletions(-)
+
+commit b254bd97b1cdb68d127523d91ca9e054ed89c4fd
+Author: Lasse Collin <lasse.collin@tukaani.org>
+Date: 2008-01-17 17:39:42 +0200
+
+ Fix wrong too small size of argument unfiltered_max
+ in ia64_coder_init(). It triggered assert() in
+ simple_coder.c, and could have caused a buffer overflow.
+
+ This error was probably a copypaste mistake, since most
+ of the simple filters use unfiltered_max = 4.
+
+ src/liblzma/simple/ia64.c | 2 +-
+ 1 files changed, 1 insertions(+), 1 deletions(-)
+
+commit 8f5794c8f1a30e8e3b524b415bbe81af2e04c64a
+Author: Lasse Collin <lasse.collin@tukaani.org>
+Date: 2008-01-17 17:27:45 +0200
+
+ Added --delta to the output of "lzma --help".
+
+ src/lzma/help.c | 4 ++++
+ 1 files changed, 4 insertions(+), 0 deletions(-)
+
+commit f88590e0014b38d40465937c19f25f05f16c79ae
+Author: Lasse Collin <lasse.collin@tukaani.org>
+Date: 2008-01-17 13:14:20 +0200
+
+ Fix Subblock docoder: If Subblock filter was used with known
+ Uncompressed Size, and the last output byte was from RLE,
+ the code didn't stop decoding as it should have done.
+
+ src/liblzma/subblock/subblock_decoder.c | 6 ++++++
+ 1 files changed, 6 insertions(+), 0 deletions(-)
+
+commit bc0b945ca376e333077644d2f7fd54c2848aab8a
+Author: Lasse Collin <lasse.collin@tukaani.org>
+Date: 2008-01-16 16:33:37 +0200
+
+ Tiny non-technical edits to file-format.txt.
+
+ doc/file-format.txt | 6 +++---
+ 1 files changed, 3 insertions(+), 3 deletions(-)
+
+commit 7599bb7064ccf007f054595dedda7927af868252
+Author: Lasse Collin <lasse.collin@tukaani.org>
+Date: 2008-01-16 14:48:04 +0200
+
+ Plugged a memory leak in stream_decoder.c.
+
+ src/liblzma/common/stream_decoder.c | 20 ++++++++++++++++++++
+ 1 files changed, 20 insertions(+), 0 deletions(-)
+
+commit 0b581539311f3712946e81e747839f8fb5f441a7
+Author: Lasse Collin <lasse.collin@tukaani.org>
+Date: 2008-01-16 14:47:27 +0200
+
+ Added memory leak detection to lzmadec.c.
+
+ src/lzmadec/lzmadec.c | 3 +++
+ 1 files changed, 3 insertions(+), 0 deletions(-)
+
+commit 5b5b13c7bb8fde6331064d21f3ebde41072480c4
+Author: Lasse Collin <lasse.collin@tukaani.org>
+Date: 2008-01-16 14:46:50 +0200
+
+ Added lzma_memlimit_count().
+
+ src/liblzma/api/lzma/memlimit.h | 10 ++++++++++
+ src/liblzma/common/memory_limitter.c | 19 +++++++++++++++++++
+ 2 files changed, 29 insertions(+), 0 deletions(-)
+
+commit 19389f2b82ec54fd4c847a18f16482e7be4c9887
+Author: Lasse Collin <lasse.collin@tukaani.org>
+Date: 2008-01-16 14:31:44 +0200
+
+ Added ARRAY_SIZE(array) macro.
+
+ src/common/sysdefs.h | 4 ++++
+ 1 files changed, 4 insertions(+), 0 deletions(-)
+
+commit 9bc33a54cbf83952130adbcb1be32c6882485416
+Author: Lasse Collin <lasse.collin@tukaani.org>
+Date: 2008-01-16 13:27:03 +0200
+
+ Make Uncompresed Size validation more strict
+ in alone_decoder.c.
+
+ src/liblzma/common/alone_decoder.c | 3 ++-
+ 1 files changed, 2 insertions(+), 1 deletions(-)
+
+commit 01d71d60b79027e1ce3eb9c79ae5191e1407c883
+Author: Lasse Collin <lasse.collin@tukaani.org>
+Date: 2008-01-15 17:46:59 +0200
+
+ Free the allocated memory in lzmadec if debugging is
+ enabled. This should make it possible to detect possible
+ memory leaks with Valgrind.
+
+ src/lzmadec/lzmadec.c | 7 +++++++
+ 1 files changed, 7 insertions(+), 0 deletions(-)
+
+commit 8235e6e5b2878f76633afcda9a334640db503ef5
+Author: Lasse Collin <lasse.collin@tukaani.org>
+Date: 2008-01-15 16:25:38 +0200
+
+ Fix memory leaks from test_block_header.c.
+
+ tests/test_block_header.c | 19 +++++++++++++++++--
+ 1 files changed, 17 insertions(+), 2 deletions(-)
+
+commit f10fc6a69d40b6d5c9cfbf8d3746f49869c2e2f6
+Author: Lasse Collin <lasse.collin@tukaani.org>
+Date: 2008-01-15 14:23:35 +0200
+
+ Use fastpos.h when encoding LZMA dictionary size in
+ Filter Flags encoder.
+
+ src/liblzma/common/filter_flags_encoder.c | 40 +++++++++++++---------------
+ 1 files changed, 19 insertions(+), 21 deletions(-)
+
+commit e5728142a2048979f5c0c2149ce71ae952a092e1
+Author: Lasse Collin <lasse.collin@tukaani.org>
+Date: 2008-01-15 14:02:22 +0200
+
+ Revised the fastpos code. It now uses the slightly faster
+ table-based version from LZMA SDK 4.57. This should be
+ fast on most systems.
+
+ A simpler and smaller alternative version is also provided.
+ On some CPUs this can be even a little faster than the
+ default table-based version (see comments in fastpos.h),
+ but on most systems the table-based code is faster.
+
+ src/liblzma/common/init_encoder.c | 3 -
+ src/liblzma/lzma/Makefile.am | 4 +
+ src/liblzma/lzma/fastpos.h | 156 +++++++++
+ src/liblzma/lzma/fastpos_table.c | 519 ++++++++++++++++++++++++++++
+ src/liblzma/lzma/fastpos_tablegen.c | 63 ++++
+ src/liblzma/lzma/lzma_common.h | 3 +-
+ src/liblzma/lzma/lzma_encoder.c | 1 +
+ src/liblzma/lzma/lzma_encoder_getoptimum.c | 1 +
+ src/liblzma/lzma/lzma_encoder_init.c | 22 --
+ src/liblzma/lzma/lzma_encoder_private.h | 21 --
+ 10 files changed, 746 insertions(+), 47 deletions(-)
+
+commit 10437b5b567f6a025ff16c45a572e417a0a9cc26
+Author: Lasse Collin <lasse.collin@tukaani.org>
+Date: 2008-01-15 13:32:13 +0200
+
+ Added bsr.h.
+
+ src/liblzma/common/Makefile.am | 1 +
+ src/liblzma/common/bsr.h | 61 ++++++++++++++++++++++++++++++++++++++++
+ 2 files changed, 62 insertions(+), 0 deletions(-)
+
+commit f3c88e8b8d8dd57f4bba5f0921eebf276437c244
+Author: Lasse Collin <lasse.collin@tukaani.org>
+Date: 2008-01-15 13:29:14 +0200
+
+ Fixed assembler detection in configure.ac, and added
+ detection for x86_64.
+
+ configure.ac | 32 ++++++++++++++++----------------
+ 1 files changed, 16 insertions(+), 16 deletions(-)
+
+commit 54ec204f58287f50d3976288295da4188a19192b
+Author: Lasse Collin <lasse.collin@tukaani.org>
+Date: 2008-01-15 12:20:41 +0200
+
+ Omit invalid space from printf() format string
+ in price_table_gen.c.
+
+ src/liblzma/rangecoder/price_table_gen.c | 2 +-
+ 1 files changed, 1 insertions(+), 1 deletions(-)
+
+commit 01b4b19f49f00e17a0f9cb8754c672ac0847b6e1
+Author: Lasse Collin <lasse.collin@tukaani.org>
+Date: 2008-01-15 09:54:34 +0200
+
+ Removed a few unused macros from lzma_common.h.
+
+ src/liblzma/lzma/lzma_common.h | 8 ++------
+ 1 files changed, 2 insertions(+), 6 deletions(-)
+
+commit 19bd7f3cf25e4ff8487ef7098ca4a7b58681961d
+Author: Lasse Collin <lasse.collin@tukaani.org>
+Date: 2008-01-15 08:37:42 +0200
+
+ Fix a typo in lzma_encoder.c.
+
+ src/liblzma/lzma/lzma_encoder.c | 2 +-
+ 1 files changed, 1 insertions(+), 1 deletions(-)
+
+commit 9f9b1983013048f2142e8bc7e240149d2687bedc
+Author: Lasse Collin <lasse.collin@tukaani.org>
+Date: 2008-01-15 08:36:25 +0200
+
+ Convert bittree_get_price() and bittree_reverse_get_price()
+ from macros to inline functions.
+
+ src/liblzma/lzma/lzma_encoder.c | 19 +++----
+ src/liblzma/lzma/lzma_encoder_getoptimum.c | 16 ++----
+ src/liblzma/rangecoder/range_encoder.h | 76 ++++++++++++++++------------
+ 3 files changed, 56 insertions(+), 55 deletions(-)
+
+commit 78e85cb1a7667c54853670d2eb09d754bcbda87d
+Author: Lasse Collin <lasse.collin@tukaani.org>
+Date: 2008-01-15 07:44:59 +0200
+
+ Fix CRC code in case --enable-small is used.
+
+ src/liblzma/check/crc32_init.c | 2 +-
+ src/liblzma/check/crc64_init.c | 2 +-
+ src/liblzma/common/init_decoder.c | 2 --
+ src/liblzma/common/init_encoder.c | 2 --
+ tests/test_check.c | 2 ++
+ 5 files changed, 4 insertions(+), 6 deletions(-)
+
+commit 949d4346e2d75bcd9dcb66c394d8d851d8db3aa0
+Author: Lasse Collin <lasse.collin@tukaani.org>
+Date: 2008-01-15 07:41:39 +0200
+
+ Fix typo in test_index.c.
+
+ tests/test_index.c | 2 +-
+ 1 files changed, 1 insertions(+), 1 deletions(-)
+
+commit d13d693155c176fc9e9ad5c50d48ccba27c2d9c6
+Author: Lasse Collin <lasse.collin@tukaani.org>
+Date: 2008-01-15 07:40:21 +0200
+
+ Added precomputed range coder probability price table.
+
+ src/liblzma/common/init_encoder.c | 5 +-
+ src/liblzma/rangecoder/Makefile.am | 9 +++-
+ src/liblzma/rangecoder/price_table.c | 70 +++++++++++++++++++++++++++++
+ src/liblzma/rangecoder/price_table_gen.c | 55 ++++++++++++++++++++++
+ src/liblzma/rangecoder/price_table_init.c | 48 ++++++++++++++++++++
+ src/liblzma/rangecoder/range_common.h | 4 +-
+ src/liblzma/rangecoder/range_encoder.c | 46 -------------------
+ src/liblzma/rangecoder/range_encoder.h | 21 ++++-----
+ 8 files changed, 197 insertions(+), 61 deletions(-)
+
+commit 362dc3843b373c1007a50a4719f378981f18ae03
+Author: Lasse Collin <lasse.collin@tukaani.org>
+Date: 2008-01-14 13:42:43 +0200
+
+ Remove RC_BUFFER_SIZE from lzma_encoder_private.h
+ and replace it with a sanity check.
+
+ src/liblzma/lzma/lzma_encoder_private.h | 6 ++++--
+ 1 files changed, 4 insertions(+), 2 deletions(-)
+
+commit e22b37968d153683fec61ad37b6b160cb7ca4ddc
+Author: Lasse Collin <lasse.collin@tukaani.org>
+Date: 2008-01-14 13:39:54 +0200
+
+ Major changes to LZ encoder, LZMA encoder, and range encoder.
+ These changes implement support for LZMA_SYNC_FLUSH in LZMA
+ encoder, and move the temporary buffer needed by range encoder
+ from lzma_range_encoder structure to lzma_lz_encoder.
+
+ src/liblzma/lz/lz_encoder.c | 138 +++++++++++++++++++++++++++-----
+ src/liblzma/lz/lz_encoder.h | 17 +++-
+ src/liblzma/lzma/lzma_encoder.c | 74 ++++++++++-------
+ src/liblzma/rangecoder/range_encoder.h | 117 ++++++++-------------------
+ 4 files changed, 206 insertions(+), 140 deletions(-)
+
+commit b59ef3973781f892c0a72b5e5934194567100be5
+Author: Lasse Collin <lasse.collin@tukaani.org>
+Date: 2008-01-14 13:34:29 +0200
+
+ Added one assert() to process.c of the command line tool.
+
+ src/lzma/process.c | 1 +
+ 1 files changed, 1 insertions(+), 0 deletions(-)
+
+commit 9547e734a00ddb64c851fa3f116e4f9e7d763ea7
+Author: Lasse Collin <lasse.collin@tukaani.org>
+Date: 2008-01-14 12:09:52 +0200
+
+ Don't use coder->lz.stream_end_was_reached in assertions
+ in match_c.h.
+
+ src/liblzma/lz/match_c.h | 2 --
+ 1 files changed, 0 insertions(+), 2 deletions(-)
+
+commit 3e09e1c05871f3757f759b801890ccccc9286608
+Author: Lasse Collin <lasse.collin@tukaani.org>
+Date: 2008-01-14 12:08:02 +0200
+
+ In lzma_read_match_distances(), don't use
+ coder->lz.stream_end_was_reached. That variable
+ will be removed, and the check isn't required anyway.
+ Rearrange the check so that it doesn't make one to
+ think that there could be an integer overflow.
+
+ src/liblzma/lzma/lzma_encoder_private.h | 6 +++---
+ 1 files changed, 3 insertions(+), 3 deletions(-)
+
+commit a670fec8021e5962429689c194148a04c3418872
+Author: Lasse Collin <lasse.collin@tukaani.org>
+Date: 2008-01-14 11:56:41 +0200
+
+ Small LZMA_SYNC_FLUSH fixes to Block and Single-Stream encoders.
+
+ src/liblzma/common/block_encoder.c | 4 ++--
+ src/liblzma/common/stream_encoder_single.c | 1 +
+ 2 files changed, 3 insertions(+), 2 deletions(-)
+
+commit 3599dba9570a6972a16b6398d6c838e9b420e985
+Author: Lasse Collin <lasse.collin@tukaani.org>
+Date: 2008-01-14 11:54:56 +0200
+
+ More fixes to LZMA decoder's flush marker handling.
+
+ src/liblzma/lzma/lzma_decoder.c | 52 ++++++++++++++++++++++----------------
+ 1 files changed, 30 insertions(+), 22 deletions(-)
+
+commit f73c2ab6079ed5675a42b39d584a567befbd4624
+Author: Lasse Collin <lasse.collin@tukaani.org>
+Date: 2008-01-10 17:13:42 +0200
+
+ Eliminate lzma_lz_encoder.must_move_pos. It's needed
+ only in one place which isn't performance criticial.
+
+ src/liblzma/lz/lz_encoder.c | 6 ++----
+ src/liblzma/lz/lz_encoder.h | 4 ----
+ 2 files changed, 2 insertions(+), 8 deletions(-)
+
+commit 382808514a42b2f4b4a64515e2dfb3fc1bc48ecd
+Author: Lasse Collin <lasse.collin@tukaani.org>
+Date: 2008-01-09 20:05:57 +0200
+
+ Define HAVE_ASM_X86 when x86 assembler optimizations are
+ used. This #define will be useful for inline assembly.
+
+ configure.ac | 5 ++++-
+ 1 files changed, 4 insertions(+), 1 deletions(-)
+
+commit 0e70fbe4032351aab13a1cd8e5deced105c0b276
+Author: Lasse Collin <lasse.collin@tukaani.org>
+Date: 2008-01-09 12:06:46 +0200
+
+ Added good-single-none-empty_3.lzma and
+ bad-single-none-empty.lzma.
+
+ tests/files/README | 6 ++++++
+ tests/files/bad-single-none-empty.lzma | Bin 0 -> 19 bytes
+ tests/files/good-single-none-empty_3.lzma | Bin 0 -> 19 bytes
+ 3 files changed, 6 insertions(+), 0 deletions(-)
+
+commit 379fbbe84d922c7cc00afa65c6f0c095da596b19
+Author: Lasse Collin <lasse.collin@tukaani.org>
+Date: 2008-01-08 23:11:59 +0200
+
+ Take advantage of return_if_error() in block_decoder.c.
+
+ src/liblzma/common/block_decoder.c | 23 +++++++----------------
+ 1 files changed, 7 insertions(+), 16 deletions(-)
+
+commit 97d5fa82077e57815dfad995dc393c2809a78539
+Author: Lasse Collin <lasse.collin@tukaani.org>
+Date: 2008-01-08 23:10:57 +0200
+
+ Updated tests/files/README.
+
+ tests/files/README | 15 +++++++++------
+ 1 files changed, 9 insertions(+), 6 deletions(-)
+
+commit 3bb9bb310936cba6a743b4f06739a397dec7c28f
+Author: Lasse Collin <lasse.collin@tukaani.org>
+Date: 2008-01-08 23:05:40 +0200
+
+ Added test files with empty Compressed Data.
+
+ tests/files/README | 6 ++++++
+ tests/files/good-single-lzma-empty.lzma | Bin 0 -> 21 bytes
+ tests/files/good-single-none-empty_1.lzma | Bin 0 -> 18 bytes
+ tests/files/good-single-none-empty_2.lzma | Bin 0 -> 26 bytes
+ 4 files changed, 6 insertions(+), 0 deletions(-)
+
+commit 7054c5f5888ac6a7178cd43dc9583ce6c7e78c9f
+Author: Lasse Collin <lasse.collin@tukaani.org>
+Date: 2008-01-08 22:58:42 +0200
+
+ Fix decoding of Blocks that have only Block Header.
+
+ src/liblzma/common/block_decoder.c | 37 +++++++++++++----------------------
+ 1 files changed, 14 insertions(+), 23 deletions(-)
+
+commit 753e4d95cd1cf29c632dfe1a670af7c67aeffbf4
+Author: Lasse Collin <lasse.collin@tukaani.org>
+Date: 2008-01-08 22:27:46 +0200
+
+ Added good-single-subblock_implicit.lzma.
+
+ tests/files/README | 2 ++
+ tests/files/good-single-subblock_implicit.lzma | Bin 0 -> 35 bytes
+ 2 files changed, 2 insertions(+), 0 deletions(-)
+
+commit faeac7b7aca75f86afed1e7cc06279d9d497c627
+Author: Lasse Collin <lasse.collin@tukaani.org>
+Date: 2008-01-08 18:50:30 +0200
+
+ Disable CRC32 from Block Headers when --check=none
+ has been specified.
+
+ src/lzma/process.c | 2 +-
+ 1 files changed, 1 insertions(+), 1 deletions(-)
+
+commit a751126dbb656767ed4666cf0e5d3e17349d93d1
+Author: Lasse Collin <lasse.collin@tukaani.org>
+Date: 2008-01-08 13:36:29 +0200
+
+ Fixed encoding of empty files. Arguments to is_size_valid()
+ were in wrong order in block_encoder.c.
+
+ src/liblzma/common/block_encoder.c | 2 +-
+ 1 files changed, 1 insertions(+), 1 deletions(-)
+
+commit 9080267603b1006c4867c823307dca9df8be0d20
+Author: Lasse Collin <lasse.collin@tukaani.org>
+Date: 2008-01-08 13:35:36 +0200
+
+ Added a few test files.
+
+ tests/files/README | 21 +++++++++++++++++--
+ tests/files/bad-cat-single-none-pad_garbage_1.lzma | Bin 0 -> 65 bytes
+ tests/files/bad-cat-single-none-pad_garbage_2.lzma | Bin 0 -> 65 bytes
+ tests/files/bad-cat-single-none-pad_garbage_3.lzma | Bin 0 -> 65 bytes
+ tests/files/bad-single-data_after_eopm.lzma | Bin 55 -> 0 bytes
+ tests/files/bad-single-data_after_eopm_1.lzma | Bin 0 -> 55 bytes
+ tests/files/bad-single-none-truncated.lzma | Bin 0 -> 29 bytes
+ 7 files changed, 18 insertions(+), 3 deletions(-)
+
+commit b4943ccf73b64fc93a90a23474509c316f55eb2b
+Author: Lasse Collin <lasse.collin@tukaani.org>
+Date: 2008-01-08 12:29:58 +0200
+
+ Avoid using ! in test_files.sh, because that doesn't work
+ with some ancient /bin/sh versions.
+
+ tests/test_files.sh | 4 +++-
+ 1 files changed, 3 insertions(+), 1 deletions(-)
+
+commit e2417b2b9134f3f65e14b61e23cd3644d8954353
+Author: Lasse Collin <lasse.collin@tukaani.org>
+Date: 2008-01-08 00:48:30 +0200
+
+ More pre-C99 inttypes.h compatibility fixes. Now the code
+ should work even if the system has no inttypes.h.
+
+ src/common/physmem.h | 11 -----------
+ src/liblzma/check/crc32_init.c | 5 +----
+ src/liblzma/check/crc32_tablegen.c | 7 ++-----
+ src/liblzma/check/crc64_init.c | 5 +----
+ src/liblzma/check/crc64_tablegen.c | 7 ++-----
+ 5 files changed, 6 insertions(+), 29 deletions(-)
+
+commit 5d227e51c23639423f4ade06aabb54e131f8505e
+Author: Lasse Collin <lasse.collin@tukaani.org>
+Date: 2008-01-07 23:25:32 +0200
+
+ Updated fi.po although it's currently pretty much crap.
+
+ po/fi.po | 12 ++++++------
+ 1 files changed, 6 insertions(+), 6 deletions(-)
+
+commit c7189d981a1b27c63da0c1ee80d9b5cd8ce1733d
+Author: Lasse Collin <lasse.collin@tukaani.org>
+Date: 2008-01-07 23:14:25 +0200
+
+ Test for $GCC = yes instead of if it is non-empty. This
+ way it is possible to use ac_cv_c_compiler_gnu=no to
+ force configure to think it is using non-GNU C compiler.
+
+ configure.ac | 2 +-
+ 1 files changed, 1 insertions(+), 1 deletions(-)
+
+commit 3dbbea82b74bb841c995ad332a3aeca613015e10
+Author: Lasse Collin <lasse.collin@tukaani.org>
+Date: 2008-01-07 21:49:41 +0200
+
+ Added test_files.sh to tests/Makefile.am so it gets
+ included in the tarball with "make dist".
+
+ tests/Makefile.am | 2 +-
+ 1 files changed, 1 insertions(+), 1 deletions(-)
+
+commit 2fd2d181543feab1b4003f3ac6e85625fbee04f0
+Author: Lasse Collin <lasse.collin@tukaani.org>
+Date: 2008-01-07 18:22:24 +0200
+
+ Cosmetic edit to test_files.sh.
+
+ tests/test_files.sh | 4 ++--
+ 1 files changed, 2 insertions(+), 2 deletions(-)
+
+commit 9a71d573100a990ceb30ce0bec6a9a15d795605f
+Author: Lasse Collin <lasse.collin@tukaani.org>
+Date: 2008-01-07 18:09:44 +0200
+
+ Added tests/files/README.
+
+ tests/files/README | 108 ++++++++++++++++++++++++++++++++++++++++++++++++++++
+ 1 files changed, 108 insertions(+), 0 deletions(-)
+
+commit 47f48fe9936ed72617a60fbd015df7e0e47a1e43
+Author: Lasse Collin <lasse.collin@tukaani.org>
+Date: 2008-01-07 14:20:57 +0200
+
+ Tell in COPYING that everything in tests/files is
+ public domain.
+
+ COPYING | 3 ++-
+ 1 files changed, 2 insertions(+), 1 deletions(-)
+
+commit 3502b3e1d00251d3c8dda96079440705c28d8225
+Author: Lasse Collin <lasse.collin@tukaani.org>
+Date: 2008-01-07 14:19:05 +0200
+
+ Cleaned up the tests/files directory.
+
+ tests/files/bad-single-subblock-padding_loop.lzma | Bin 0 -> 43 bytes
+ tests/files/bad-single-subblock1023-slow.lzma | Bin 0 -> 7886 bytes
+ tests/files/malicious-single-subblock-loop.lzma | Bin 43 -> 0 bytes
+ tests/files/malicious-single-subblock-lzma.lzma | Bin 505 -> 0 bytes
+ .../files/malicious-single-subblock1023-slow.lzma | Bin 7886 -> 0 bytes
+ 5 files changed, 0 insertions(+), 0 deletions(-)
+
+commit 908b2ac604b9940369d7fe8a45e9eb6da5d2a24c
+Author: Lasse Collin <lasse.collin@tukaani.org>
+Date: 2008-01-07 13:49:19 +0200
+
+ Added test_files.sh to test decoding of the files in
+ the tests/files directory. It doesn't test the malicious
+ files yet.
+
+ tests/Makefile.am | 4 +++-
+ tests/test_files.sh | 40 ++++++++++++++++++++++++++++++++++++++++
+ 2 files changed, 43 insertions(+), 1 deletions(-)
+
+commit ecb2a6548f5978022a8fa931719dc575f5fd3bf6
+Author: Lasse Collin <lasse.collin@tukaani.org>
+Date: 2008-01-07 11:23:13 +0200
+
+ Updated README regarding the assembler optimizations.
+
+ README | 10 +++++-----
+ 1 files changed, 5 insertions(+), 5 deletions(-)
+
+commit eacb8050438d3e6146c86eb9732d3fb1ef1825cb
+Author: Lasse Collin <lasse.collin@tukaani.org>
+Date: 2008-01-07 10:58:00 +0200
+
+ Updated THANKS.
+
+ THANKS | 1 +
+ 1 files changed, 1 insertions(+), 0 deletions(-)
+
+commit 1239649f96132b18e3b7e2dd152ecf53a195caa8
+Author: Lasse Collin <lasse.collin@tukaani.org>
+Date: 2008-01-06 21:47:17 +0200
+
+ Cosmetic changes to configure.ac.
+
+ configure.ac | 14 ++++++--------
+ 1 files changed, 6 insertions(+), 8 deletions(-)
+
+commit 88ee301ec2e4506a30ec7ac9aaa2288e2dcadd0e
+Author: Lasse Collin <lasse.collin@tukaani.org>
+Date: 2008-01-06 19:46:38 +0200
+
+ Automatically disable assembler code on Darwin x86.
+ Darwin has different ABI than GNU+Linux and Solaris,
+ thus the assembler code doesn't assemble on Darwin.
+
+ configure.ac | 17 +++++++++++++++--
+ 1 files changed, 15 insertions(+), 2 deletions(-)
+
+commit c15a7abf66e3a70792f7444115e484c7981c8284
+Author: Lasse Collin <lasse.collin@tukaani.org>
+Date: 2008-01-06 19:45:27 +0200
+
+ With printf(), use PRIu64 with a cast to uint64_t instead
+ of %zu, because some pre-C99 libc versions don't support %zu.
+
+ src/lzma/help.c | 13 +++++++------
+ src/lzmadec/lzmadec.c | 6 ++++--
+ 2 files changed, 11 insertions(+), 8 deletions(-)
+
+commit 4e7e54c4c522ab2f6a7abb92cefc4f707e9568fb
+Author: Lasse Collin <lasse.collin@tukaani.org>
+Date: 2008-01-06 16:27:41 +0200
+
+ Introduced compatibility with systems that have pre-C99
+ or no inttypes.h. This is useful when the compiler has
+ good enough support for C99, but libc headers don't.
+
+ Changed liblzma API so that sys/types.h and inttypes.h
+ have to be #included before #including lzma.h. On systems
+ that don't have C99 inttypes.h, it's the problem of the
+ applications to provide the required types and macros
+ before #including lzma.h.
+
+ If lzma.h defined the missing types and macros, it could
+ conflict with third-party applications whose configure
+ has detected that the types are missing and defined them
+ in config.h already. An alternative would have been
+ introducing lzma_uint32 and similar types, but that would
+ just be an extra pain on modern systems.
+
+ configure.ac | 13 +++++++-
+ doc/liblzma-intro.txt | 10 +++++-
+ src/common/sysdefs.h | 59 +++++++++++++++++++++++++++++++++++-
+ src/liblzma/api/lzma.h | 40 ++++++++++++++++--------
+ src/liblzma/check/crc32_table.c | 4 +--
+ src/liblzma/check/crc32_table_be.h | 2 -
+ src/liblzma/check/crc32_table_le.h | 2 -
+ src/liblzma/check/crc32_tablegen.c | 1 -
+ src/liblzma/check/crc64_table.c | 4 +--
+ src/liblzma/check/crc64_table_be.h | 2 -
+ src/liblzma/check/crc64_table_le.h | 2 -
+ src/liblzma/check/crc64_tablegen.c | 1 -
+ src/lzma/private.h | 1 -
+ 13 files changed, 106 insertions(+), 35 deletions(-)
+
+commit a71864f77dfb76b5d78a270641539947c312583a
+Author: Lasse Collin <lasse.collin@tukaani.org>
+Date: 2008-01-05 19:57:00 +0200
+
+ Fix typo in comment (INT64_MAX -> UINT64_MAX).
+
+ src/liblzma/api/lzma/vli.h | 2 +-
+ 1 files changed, 1 insertions(+), 1 deletions(-)
+
+commit 072927905a3b66281c6311b4b351caa501d8b73a
+Author: Lasse Collin <lasse.collin@tukaani.org>
+Date: 2008-01-05 19:42:04 +0200
+
+ Rearranged testing of GCC-specific flags.
+
+ configure.ac | 33 +++++++++++++++++++++++----------
+ 1 files changed, 23 insertions(+), 10 deletions(-)
+
+commit d160ee32598c6d1cd9054ef019e8c9331208b188
+Author: Lasse Collin <lasse.collin@tukaani.org>
+Date: 2008-01-05 01:20:24 +0200
+
+ Another bug fix for flush marker detection.
+
+ src/liblzma/lzma/lzma_decoder.c | 10 +++++++++-
+ 1 files changed, 9 insertions(+), 1 deletions(-)
+
+commit fc67f79f607cbfa78c6f47a69dec098d8659b162
+Author: Lasse Collin <lasse.collin@tukaani.org>
+Date: 2008-01-04 21:37:01 +0200
+
+ Fix stupid bugs in flush marker detection.
+
+ src/liblzma/lzma/lzma_decoder.c | 7 ++++---
+ 1 files changed, 4 insertions(+), 3 deletions(-)
+
+commit 0029cbbabe87d491fc046a55a629a6d556010baa
+Author: Lasse Collin <lasse.collin@tukaani.org>
+Date: 2008-01-04 21:30:33 +0200
+
+ Added support for flush marker, which will be in files
+ that use LZMA_SYNC_FLUSH with encoder (not implemented
+ yet). This is a new feature in the raw LZMA format,
+ which isn't supported by old decoders. This shouldn't
+ be a problem in practice, since lzma_alone_encoder()
+ will not allow LZMA_SYNC_FLUSH, and thus not allow
+ creating files on decodable with old decoders.
+
+ Made lzma_decoder.c to require tab width of 4 characters
+ if one wants to fit the code in 80 columns. This makes
+ the code easier to read.
+
+ src/liblzma/lzma/lzma_common.h | 4 +
+ src/liblzma/lzma/lzma_decoder.c | 217 ++++++++++++++++++---------------------
+ 2 files changed, 104 insertions(+), 117 deletions(-)
+
+commit bbfd1f6ab058a7e661545205befcb7f70c5685ab
+Author: Lasse Collin <lasse.collin@tukaani.org>
+Date: 2008-01-04 20:45:05 +0200
+
+ Moved range decoder initialization (reading the first
+ five input bytes) from LZMA decoder to range decoder
+ header. Did the same for decoding of direct bits.
+
+ src/liblzma/lzma/lzma_decoder.c | 42 ++-------------
+ src/liblzma/rangecoder/range_decoder.h | 87 ++++++++++++++++++++++----------
+ 2 files changed, 66 insertions(+), 63 deletions(-)
+
+commit 5db745cd2a74f6ed2e52f5c716c08ed0daf17ebc
+Author: Lasse Collin <lasse.collin@tukaani.org>
+Date: 2007-12-14 11:15:21 +0200
+
+ Added a note to README that --disable-assembler
+ must be used on Darwin.
+
+ README | 4 ++++
+ 1 files changed, 4 insertions(+), 0 deletions(-)
+
+commit 44b333d4615b5aabc557a0e1b6bb0096da3fae24
+Author: Lasse Collin <lasse.collin@tukaani.org>
+Date: 2007-12-14 10:07:10 +0200
+
+ Use the filename suffix .S instead of .s for assembler files
+ so that the preprocessor removes the /* */ style comments,
+ which are not supported by some non-GNU assemblers (Solaris)
+ that otherwise work with this code.
+
+ src/liblzma/check/Makefile.am | 4 +-
+ src/liblzma/check/crc32_x86.S | 217 +++++++++++++++++++++++++++++++++++++++++
+ src/liblzma/check/crc32_x86.s | 217 -----------------------------------------
+ src/liblzma/check/crc64_x86.S | 203 ++++++++++++++++++++++++++++++++++++++
+ src/liblzma/check/crc64_x86.s | 203 --------------------------------------
+ 5 files changed, 422 insertions(+), 422 deletions(-)
+
+commit ec1c82b2e82f395f6e8e19ac212a639644330cd7
+Author: Lasse Collin <lasse.collin@tukaani.org>
+Date: 2007-12-14 09:59:05 +0200
+
+ Fixed wrong symbol name in crc64_x86.s.
+
+ src/liblzma/check/crc64_x86.s | 2 +-
+ 1 files changed, 1 insertions(+), 1 deletions(-)
+
+commit 2881570df6803eed2fe550af34574e8e61794804
+Author: Lasse Collin <lasse.collin@tukaani.org>
+Date: 2007-12-14 09:53:24 +0200
+
+ Use .globl instead of .global in x86 assembler code for
+ better portability. Still needs fixing the commenting.
+
+ src/liblzma/check/crc32_x86.s | 2 +-
+ src/liblzma/check/crc64_x86.s | 2 +-
+ 2 files changed, 2 insertions(+), 2 deletions(-)
+
+commit 698470b8f33fc0e5f27dafa93b39b6dd5dde5a66
+Author: Lasse Collin <lasse.collin@tukaani.org>
+Date: 2007-12-13 20:14:37 +0200
+
+ Fixed a few short options that take an argument.
+ short_opts[] was missing colons to indicate
+ required argument. Thanks to Fabio Pedretti for
+ the bug report.
+
+ src/lzma/args.c | 2 +-
+ 1 files changed, 1 insertions(+), 1 deletions(-)
+
+commit 918bcb0e0728d2d976621e9f35b56f224f11d989
+Author: Lasse Collin <lasse.collin@tukaani.org>
+Date: 2007-12-11 17:08:04 +0200
+
+ Removed uncompressed size tracking from Delta encoder too.
+
+ src/liblzma/common/delta_coder.c | 21 +++------------------
+ 1 files changed, 3 insertions(+), 18 deletions(-)
+
+commit 3e16d51dd645667b05ff826665b1fc353aa41cd9
+Author: Lasse Collin <lasse.collin@tukaani.org>
+Date: 2007-12-11 16:49:19 +0200
+
+ Remove uncompressed size tracking from the filter encoders.
+ It's not strictly needed there, and just complicates the
+ code. LZ encoder never even had this feature.
+
+ The primary reason to have uncompressed size tracking in
+ filter encoders was validating that the application
+ doesn't give different amount of input that it had
+ promised. A side effect was to validate internal workings
+ of liblzma.
+
+ Uncompressed size tracking is still present in the Block
+ encoder. Maybe it should be added to LZMA_Alone and raw
+ encoders too. It's simpler to have one coder just to
+ validate the uncompressed size instead of having it
+ in every filter.
+
+ src/liblzma/common/copy_coder.c | 25 +------------------
+ src/liblzma/simple/simple_coder.c | 29 +++--------------------
+ src/liblzma/subblock/subblock_encoder.c | 38 +++++--------------------------
+ 3 files changed, 12 insertions(+), 80 deletions(-)
+
+commit 5286723e0d1ac386d5b07f08d78e61becf895a5a
+Author: Lasse Collin <lasse.collin@tukaani.org>
+Date: 2007-12-11 14:10:53 +0200
+
+ Get rid of no-NLS gnulib. I don't know how to get it
+ working with Automake. People who want smaller lzmadec
+ should use --disable-nls on non-GNU systems.
+
+ lib/Makefile.am | 10 +---------
+ src/lzma/Makefile.am | 2 +-
+ src/lzmadec/Makefile.am | 4 +++-
+ 3 files changed, 5 insertions(+), 11 deletions(-)
+
+commit ce8b036a6c7a43b290356b673d953f6d76b2be64
+Author: Lasse Collin <lasse.collin@tukaani.org>
+Date: 2007-12-11 14:09:35 +0200
+
+ Fixed a typo in tests/Makefile.am which prevented
+ building the tests if gnulib was needed.
+
+ tests/Makefile.am | 2 +-
+ 1 files changed, 1 insertions(+), 1 deletions(-)
+
+commit 7c1ad41eb611ed89e5bb8792a3beb533b7aa59f4
+Author: Lasse Collin <lasse.collin@tukaani.org>
+Date: 2007-12-11 11:18:58 +0200
+
+ Fixed wrong type of flags_size in Subblock encoder.
+
+ src/liblzma/subblock/subblock_encoder.c | 2 +-
+ 1 files changed, 1 insertions(+), 1 deletions(-)
+
+commit ce64df716243fdc40359090d1f6541f3a4f5f21a
+Author: Lasse Collin <lasse.collin@tukaani.org>
+Date: 2007-12-10 20:44:16 +0200
+
+ Bumped version number to 4.42.3alpha.
+
+ configure.ac | 2 +-
+ src/liblzma/api/lzma/version.h | 2 +-
+ 2 files changed, 2 insertions(+), 2 deletions(-)
+
+commit b499a0403ea5c41d6a25b40275eb6c57643052ce
+Author: Lasse Collin <lasse.collin@tukaani.org>
+Date: 2007-12-10 15:02:50 +0200
+
+ Disabled some unneeded warnings and made "make dist" work.
+
+ Makefile.am | 9 +++------
+ configure.ac | 9 ++++++---
+ po/fi.po | 47 ++++++++++++++++++++++++-----------------------
+ 3 files changed, 33 insertions(+), 32 deletions(-)
+
+commit 2ab8adb5165a0b77114a7eb21f9ff1e6a266f172
+Author: Lasse Collin <lasse.collin@tukaani.org>
+Date: 2007-12-09 21:43:15 +0200
+
+ Added LZMA_SYNC_FLUSH support to the Copy filter.
+
+ src/liblzma/common/copy_coder.c | 92 ++++++++++++++++++++++++---------------
+ 1 files changed, 57 insertions(+), 35 deletions(-)
+
+commit 329c272d501e88793dda5540358d55c12428d194
+Author: Lasse Collin <lasse.collin@tukaani.org>
+Date: 2007-12-09 17:14:07 +0200
+
+ Added missing LZMA_API to the C versions of the CRC functions.
+ The x86 assembler versions were already OK.
+
+ src/liblzma/check/crc32.c | 2 +-
+ src/liblzma/check/crc64.c | 2 +-
+ 2 files changed, 2 insertions(+), 2 deletions(-)
+
+commit c90daf86ce683fa8cf80491d624ffb158dfbd9d7
+Author: Jim Meyering <meyering@redhat.com>
+Date: 2007-12-09 15:34:25 +0100
+
+ * tests/test_block_header.c (test3): Remove duplicate initializer.
+
+ autogen.sh | 2 +-
+ tests/test_block_header.c | 1 -
+ 2 files changed, 1 insertions(+), 2 deletions(-)
+
+commit 07ac881779a8477f2c1ab112b91a129e24aa743c
+Author: Lasse Collin <lasse.collin@tukaani.org>
+Date: 2007-12-09 17:06:45 +0200
+
+ Take advantage of return_if_error() macro in more places.
+ Cleaned Subblock filter's initialization code too.
+
+ src/liblzma/common/block_decoder.c | 22 +++-------
+ src/liblzma/common/delta_coder.c | 8 +---
+ src/liblzma/common/stream_decoder.c | 17 +++-----
+ src/liblzma/common/stream_encoder_multi.c | 68 +++++++++------------------
+ src/liblzma/common/stream_encoder_single.c | 8 +--
+ src/liblzma/subblock/subblock_decoder.c | 33 +++++---------
+ src/liblzma/subblock/subblock_encoder.c | 45 +++++-------------
+ 7 files changed, 63 insertions(+), 138 deletions(-)
+
+commit 41338717964f510ee61d70b25bd4c502ec9f77cf
+Author: Lasse Collin <lasse.collin@tukaani.org>
+Date: 2007-12-09 12:13:01 +0200
+
+ Added a bunch of .lzma test files.
+
+ tests/files/bad-single-data_after_eopm.lzma | Bin 0 -> 55 bytes
+ tests/files/bad-single-data_after_eopm_2.lzma | Bin 0 -> 56 bytes
+ tests/files/bad-single-subblock_subblock.lzma | Bin 0 -> 26 bytes
+ tests/files/good-cat-single-none-pad.lzma | Bin 0 -> 64 bytes
+ tests/files/good-single-delta-lzma.tiff.lzma | Bin 0 -> 51409 bytes
+ tests/files/good-single-lzma.lzma | Bin 0 -> 44 bytes
+ tests/files/good-single-none-pad.lzma | Bin 0 -> 32 bytes
+ tests/files/good-single-none.lzma | Bin 0 -> 30 bytes
+ tests/files/good-single-subblock-lzma.lzma | Bin 0 -> 50 bytes
+ tests/files/good-single-subblock_rle.lzma | Bin 0 -> 118 bytes
+ tests/files/malicious-multi-metadata-64PiB.lzma | Bin 0 -> 51 bytes
+ tests/files/malicious-single-subblock-256MiB.lzma | Bin 0 -> 30 bytes
+ tests/files/malicious-single-subblock-64PiB.lzma | Bin 0 -> 45 bytes
+ tests/files/malicious-single-subblock-loop.lzma | Bin 0 -> 43 bytes
+ tests/files/malicious-single-subblock-lzma.lzma | Bin 0 -> 505 bytes
+ .../files/malicious-single-subblock1023-slow.lzma | Bin 0 -> 7886 bytes
+ tests/files/malicious-single-subblock31-slow.lzma | Bin 0 -> 1233 bytes
+ 17 files changed, 0 insertions(+), 0 deletions(-)
+
+commit ff946ceb7975d4f11950afd33f6315b4d20d1a03
+Author: Lasse Collin <lasse.collin@tukaani.org>
+Date: 2007-12-09 11:24:48 +0200
+
+ Re-enabled the security checks in Subblock decoder
+ that were disabled for debugging reasons.
+
+ src/liblzma/subblock/subblock_decoder.c | 6 +++---
+ 1 files changed, 3 insertions(+), 3 deletions(-)
+
+commit 2bf36d22d2c24ac3f488e63b35564fa2f6dab8d1
+Author: Lasse Collin <lasse.collin@tukaani.org>
+Date: 2007-12-09 11:03:28 +0200
+
+ Fixed the tests to build with -Werror.
+
+ tests/test_block_header.c | 2 +-
+ tests/test_check.c | 2 +-
+ tests/test_filter_flags.c | 2 +-
+ tests/test_index.c | 14 +++++++-------
+ tests/test_info.c | 2 +-
+ tests/test_stream_flags.c | 2 +-
+ 6 files changed, 12 insertions(+), 12 deletions(-)
+
+commit 5d018dc03549c1ee4958364712fb0c94e1bf2741
+Author: Lasse Collin <lasse.collin@tukaani.org>
+Date: 2007-12-09 00:42:33 +0200
+
+ Imported to git.
+
+ AUTHORS | 18 +
+ COPYING | 24 +
+ COPYING.GPLv2 | 339 +++++
+ COPYING.GPLv3 | 674 +++++++++
+ COPYING.LGPLv2.1 | 504 +++++++
+ ChangeLog | 2 +
+ Doxyfile.in | 1229 ++++++++++++++++
+ Makefile.am | 38 +
+ README | 151 ++
+ THANKS | 23 +
+ TODO | 109 ++
+ autogen.sh | 38 +
+ configure.ac | 611 ++++++++
+ doc/bugs.txt | 46 +
+ doc/faq.txt | 247 ++++
+ doc/file-format.txt | 1861 ++++++++++++++++++++++++
+ doc/history.txt | 140 ++
+ doc/liblzma-advanced.txt | 324 ++++
+ doc/liblzma-hacking.txt | 112 ++
+ doc/liblzma-intro.txt | 188 +++
+ doc/liblzma-security.txt | 219 +++
+ doc/lzma-intro.txt | 107 ++
+ extra/scanlzma/scanlzma.c | 85 ++
+ lib/Makefile.am | 40 +
+ lib/getopt.c | 1191 +++++++++++++++
+ lib/getopt1.c | 171 +++
+ lib/getopt_.h | 226 +++
+ lib/getopt_int.h | 131 ++
+ lib/gettext.h | 240 +++
+ m4/acx_pthread.m4 | 279 ++++
+ m4/getopt.m4 | 83 ++
+ po/LINGUAS | 1 +
+ po/Makevars | 46 +
+ po/POTFILES.in | 13 +
+ po/fi.po | 445 ++++++
+ src/Makefile.am | 16 +
+ src/common/open_stdxxx.h | 50 +
+ src/common/physmem.h | 77 +
+ src/common/sysdefs.h | 100 ++
+ src/liblzma/Makefile.am | 47 +
+ src/liblzma/api/Makefile.am | 39 +
+ src/liblzma/api/lzma.h | 122 ++
+ src/liblzma/api/lzma/alignment.h | 60 +
+ src/liblzma/api/lzma/alone.h | 82 ++
+ src/liblzma/api/lzma/auto.h | 41 +
+ src/liblzma/api/lzma/base.h | 410 ++++++
+ src/liblzma/api/lzma/block.h | 409 ++++++
+ src/liblzma/api/lzma/check.h | 128 ++
+ src/liblzma/api/lzma/copy.h | 29 +
+ src/liblzma/api/lzma/delta.h | 49 +
+ src/liblzma/api/lzma/extra.h | 114 ++
+ src/liblzma/api/lzma/filter.h | 166 +++
+ src/liblzma/api/lzma/index.h | 84 ++
+ src/liblzma/api/lzma/info.h | 315 ++++
+ src/liblzma/api/lzma/init.h | 85 ++
+ src/liblzma/api/lzma/lzma.h | 312 ++++
+ src/liblzma/api/lzma/memlimit.h | 157 ++
+ src/liblzma/api/lzma/metadata.h | 100 ++
+ src/liblzma/api/lzma/raw.h | 72 +
+ src/liblzma/api/lzma/simple.h | 85 ++
+ src/liblzma/api/lzma/stream.h | 178 +++
+ src/liblzma/api/lzma/stream_flags.h | 142 ++
+ src/liblzma/api/lzma/subblock.h | 197 +++
+ src/liblzma/api/lzma/version.h | 59 +
+ src/liblzma/api/lzma/vli.h | 244 ++++
+ src/liblzma/check/Makefile.am | 64 +
+ src/liblzma/check/check.c | 160 ++
+ src/liblzma/check/check.h | 102 ++
+ src/liblzma/check/check_byteswap.h | 43 +
+ src/liblzma/check/check_init.c | 37 +
+ src/liblzma/check/crc32.c | 88 ++
+ src/liblzma/check/crc32_init.c | 58 +
+ src/liblzma/check/crc32_table.c | 22 +
+ src/liblzma/check/crc32_table_be.h | 527 +++++++
+ src/liblzma/check/crc32_table_le.h | 527 +++++++
+ src/liblzma/check/crc32_tablegen.c | 55 +
+ src/liblzma/check/crc32_x86.s | 217 +++
+ src/liblzma/check/crc64.c | 75 +
+ src/liblzma/check/crc64_init.c | 58 +
+ src/liblzma/check/crc64_table.c | 22 +
+ src/liblzma/check/crc64_table_be.h | 523 +++++++
+ src/liblzma/check/crc64_table_le.h | 523 +++++++
+ src/liblzma/check/crc64_tablegen.c | 56 +
+ src/liblzma/check/crc64_x86.s | 203 +++
+ src/liblzma/check/crc_macros.h | 33 +
+ src/liblzma/check/sha256.c | 203 +++
+ src/liblzma/common/Makefile.am | 94 ++
+ src/liblzma/common/alignment.c | 118 ++
+ src/liblzma/common/allocator.c | 57 +
+ src/liblzma/common/alone_decoder.c | 197 +++
+ src/liblzma/common/alone_decoder.h | 24 +
+ src/liblzma/common/alone_encoder.c | 167 +++
+ src/liblzma/common/auto_decoder.c | 113 ++
+ src/liblzma/common/block_decoder.c | 405 +++++
+ src/liblzma/common/block_decoder.h | 29 +
+ src/liblzma/common/block_encoder.c | 375 +++++
+ src/liblzma/common/block_encoder.h | 29 +
+ src/liblzma/common/block_header_decoder.c | 373 +++++
+ src/liblzma/common/block_header_encoder.c | 211 +++
+ src/liblzma/common/block_private.h | 46 +
+ src/liblzma/common/chunk_size.c | 74 +
+ src/liblzma/common/code.c | 203 +++
+ src/liblzma/common/common.h | 271 ++++
+ src/liblzma/common/copy_coder.c | 143 ++
+ src/liblzma/common/copy_coder.h | 31 +
+ src/liblzma/common/delta_coder.c | 210 +++
+ src/liblzma/common/delta_coder.h | 31 +
+ src/liblzma/common/extra.c | 33 +
+ src/liblzma/common/features.c | 70 +
+ src/liblzma/common/filter_flags_decoder.c | 382 +++++
+ src/liblzma/common/filter_flags_encoder.c | 359 +++++
+ src/liblzma/common/index.c | 140 ++
+ src/liblzma/common/info.c | 823 +++++++++++
+ src/liblzma/common/init.c | 39 +
+ src/liblzma/common/init_decoder.c | 33 +
+ src/liblzma/common/init_encoder.c | 44 +
+ src/liblzma/common/memory_limitter.c | 200 +++
+ src/liblzma/common/memory_usage.c | 113 ++
+ src/liblzma/common/metadata_decoder.c | 555 +++++++
+ src/liblzma/common/metadata_decoder.h | 31 +
+ src/liblzma/common/metadata_encoder.c | 436 ++++++
+ src/liblzma/common/metadata_encoder.h | 30 +
+ src/liblzma/common/next_coder.c | 65 +
+ src/liblzma/common/raw_common.c | 175 +++
+ src/liblzma/common/raw_common.h | 31 +
+ src/liblzma/common/raw_decoder.c | 127 ++
+ src/liblzma/common/raw_decoder.h | 30 +
+ src/liblzma/common/raw_encoder.c | 124 ++
+ src/liblzma/common/raw_encoder.h | 30 +
+ src/liblzma/common/stream_common.c | 23 +
+ src/liblzma/common/stream_common.h | 28 +
+ src/liblzma/common/stream_decoder.c | 454 ++++++
+ src/liblzma/common/stream_encoder_multi.c | 460 ++++++
+ src/liblzma/common/stream_encoder_single.c | 220 +++
+ src/liblzma/common/stream_flags_decoder.c | 258 ++++
+ src/liblzma/common/stream_flags_decoder.h | 31 +
+ src/liblzma/common/stream_flags_encoder.c | 75 +
+ src/liblzma/common/sysdefs.h | 1 +
+ src/liblzma/common/version.c | 25 +
+ src/liblzma/common/vli_decoder.c | 69 +
+ src/liblzma/common/vli_encoder.c | 81 +
+ src/liblzma/common/vli_reverse_decoder.c | 55 +
+ src/liblzma/lz/Makefile.am | 63 +
+ src/liblzma/lz/bt2.c | 27 +
+ src/liblzma/lz/bt2.h | 31 +
+ src/liblzma/lz/bt3.c | 29 +
+ src/liblzma/lz/bt3.h | 31 +
+ src/liblzma/lz/bt4.c | 30 +
+ src/liblzma/lz/bt4.h | 31 +
+ src/liblzma/lz/hc3.c | 30 +
+ src/liblzma/lz/hc3.h | 31 +
+ src/liblzma/lz/hc4.c | 31 +
+ src/liblzma/lz/hc4.h | 31 +
+ src/liblzma/lz/lz_decoder.c | 462 ++++++
+ src/liblzma/lz/lz_decoder.h | 214 +++
+ src/liblzma/lz/lz_encoder.c | 481 ++++++
+ src/liblzma/lz/lz_encoder.h | 161 ++
+ src/liblzma/lz/lz_encoder_private.h | 40 +
+ src/liblzma/lz/match_c.h | 401 +++++
+ src/liblzma/lz/match_h.h | 69 +
+ src/liblzma/lzma.pc.in | 11 +
+ src/liblzma/lzma/Makefile.am | 43 +
+ src/liblzma/lzma/lzma_common.h | 128 ++
+ src/liblzma/lzma/lzma_decoder.c | 844 +++++++++++
+ src/liblzma/lzma/lzma_decoder.h | 41 +
+ src/liblzma/lzma/lzma_encoder.c | 413 ++++++
+ src/liblzma/lzma/lzma_encoder.h | 35 +
+ src/liblzma/lzma/lzma_encoder_features.c | 59 +
+ src/liblzma/lzma/lzma_encoder_getoptimum.c | 893 ++++++++++++
+ src/liblzma/lzma/lzma_encoder_getoptimumfast.c | 201 +++
+ src/liblzma/lzma/lzma_encoder_init.c | 245 ++++
+ src/liblzma/lzma/lzma_encoder_presets.c | 34 +
+ src/liblzma/lzma/lzma_encoder_private.h | 225 +++
+ src/liblzma/lzma/lzma_literal.c | 74 +
+ src/liblzma/lzma/lzma_literal.h | 74 +
+ src/liblzma/rangecoder/Makefile.am | 28 +
+ src/liblzma/rangecoder/range_common.h | 68 +
+ src/liblzma/rangecoder/range_decoder.h | 189 +++
+ src/liblzma/rangecoder/range_encoder.c | 46 +
+ src/liblzma/rangecoder/range_encoder.h | 317 ++++
+ src/liblzma/simple/Makefile.am | 46 +
+ src/liblzma/simple/arm.c | 76 +
+ src/liblzma/simple/armthumb.c | 81 +
+ src/liblzma/simple/ia64.c | 117 ++
+ src/liblzma/simple/powerpc.c | 80 +
+ src/liblzma/simple/simple_coder.c | 306 ++++
+ src/liblzma/simple/simple_coder.h | 68 +
+ src/liblzma/simple/simple_private.h | 86 ++
+ src/liblzma/simple/sparc.c | 88 ++
+ src/liblzma/simple/x86.c | 161 ++
+ src/liblzma/subblock/Makefile.am | 33 +
+ src/liblzma/subblock/subblock_decoder.c | 681 +++++++++
+ src/liblzma/subblock/subblock_decoder.h | 29 +
+ src/liblzma/subblock/subblock_decoder_helper.c | 80 +
+ src/liblzma/subblock/subblock_decoder_helper.h | 36 +
+ src/liblzma/subblock/subblock_encoder.c | 841 +++++++++++
+ src/liblzma/subblock/subblock_encoder.h | 28 +
+ src/lzma/Makefile.am | 63 +
+ src/lzma/alloc.c | 106 ++
+ src/lzma/alloc.h | 42 +
+ src/lzma/args.c | 566 +++++++
+ src/lzma/args.h | 64 +
+ src/lzma/error.c | 156 ++
+ src/lzma/error.h | 67 +
+ src/lzma/hardware.c | 99 ++
+ src/lzma/hardware.h | 31 +
+ src/lzma/help.c | 178 +++
+ src/lzma/help.h | 32 +
+ src/lzma/io.c | 664 +++++++++
+ src/lzma/io.h | 60 +
+ src/lzma/list.c | 477 ++++++
+ src/lzma/main.c | 254 ++++
+ src/lzma/options.c | 346 +++++
+ src/lzma/options.h | 46 +
+ src/lzma/private.h | 55 +
+ src/lzma/process.c | 458 ++++++
+ src/lzma/process.h | 30 +
+ src/lzma/suffix.c | 145 ++
+ src/lzma/suffix.h | 25 +
+ src/lzma/util.c | 182 +++
+ src/lzma/util.h | 32 +
+ src/lzmadec/Makefile.am | 27 +
+ src/lzmadec/lzmadec.c | 515 +++++++
+ src/scripts/Makefile.am | 24 +
+ src/scripts/lzdiff | 67 +
+ src/scripts/lzdiff.1 | 51 +
+ src/scripts/lzgrep | 123 ++
+ src/scripts/lzgrep.1 | 61 +
+ src/scripts/lzmore | 74 +
+ src/scripts/lzmore.1 | 55 +
+ tests/Makefile.am | 43 +
+ tests/test_block.c | 59 +
+ tests/test_block_header.c | 352 +++++
+ tests/test_check.c | 90 ++
+ tests/test_filter_flags.c | 326 +++++
+ tests/test_index.c | 43 +
+ tests/test_info.c | 717 +++++++++
+ tests/test_stream_flags.c | 191 +++
+ tests/tests.h | 148 ++
+ 239 files changed, 42513 insertions(+), 0 deletions(-)
diff --git a/Build/source/utils/xz-4.999.8beta/Doxyfile.in b/Build/source/utils/xz-4.999.9beta/Doxyfile.in
index 8ca611b6a6c..fa3c1e1ddc6 100644
--- a/Build/source/utils/xz-4.999.8beta/Doxyfile.in
+++ b/Build/source/utils/xz-4.999.9beta/Doxyfile.in
@@ -1,5 +1,8 @@
# Doxyfile 1.4.7
+# Copyright (C) 1997-2007 by Dimitri van Heesch
+# License: GNU GPLv2+
+
# This file describes the settings to be used by the documentation system
# doxygen (www.doxygen.org) for a project
#
@@ -955,13 +958,13 @@ ENABLE_PREPROCESSING = YES
# compilation will be performed. Macro expansion can be done in a controlled
# way by setting EXPAND_ONLY_PREDEF to YES.
-MACRO_EXPANSION = NO
+MACRO_EXPANSION = YES
# If the EXPAND_ONLY_PREDEF and MACRO_EXPANSION tags are both set to YES
# then the macro expansion is limited to the macros specified with the
# PREDEFINED and EXPAND_AS_DEFINED tags.
-EXPAND_ONLY_PREDEF = NO
+EXPAND_ONLY_PREDEF = YES
# If the SEARCH_INCLUDES tag is set to YES (the default) the includes files
# in the INCLUDE_PATH (see below) will be search if a #include is found.
@@ -989,7 +992,9 @@ INCLUDE_FILE_PATTERNS =
# undefined via #undef or recursively expanded use the := operator
# instead of the = operator.
-PREDEFINED =
+PREDEFINED = LZMA_API(type)=type \
+ LZMA_API_IMPORT \
+ LZMA_API_CALL=
# If the MACRO_EXPANSION and EXPAND_ONLY_PREDEF tags are set to YES then
# this tag can be used to specify a list of macro names that should be expanded.
diff --git a/Build/source/utils/xz-4.999.9beta/INSTALL b/Build/source/utils/xz-4.999.9beta/INSTALL
new file mode 100644
index 00000000000..ec757202c98
--- /dev/null
+++ b/Build/source/utils/xz-4.999.9beta/INSTALL
@@ -0,0 +1,339 @@
+
+XZ Utils Installation
+=====================
+
+ 0. Preface
+ 1. Supported platforms
+ 1.1. Compilers
+ 1.2. Platform-specific notes
+ 1.2.1. Darwin (Mac OS X)
+ 1.2.2. Tru64
+ 1.2.3. Windows
+ 1.2.4. DOS
+ 1.2.5. OS/2
+ 1.3. Adding support for new platforms
+ 2. configure options
+ 3. xzgrep and other scripts
+ 3.1. Dependencies
+ 3.2. PATH
+ 4. Troubleshooting
+ 4.1. "No C99 compiler was found."
+ 4.1. "No POSIX conforming shell (sh) was found."
+ 4.2. configure works but build fails at crc32_x86.S
+
+
+0. Preface
+----------
+
+ If you aren't familiar with building packages that use GNU Autotools,
+ see the file INSTALL.generic for generic instructions before reading
+ further.
+
+ If you are going to build a package for distribution, see also the
+ file PACKAGERS. It contains information that should help making the
+ binary packages as good as possible, but the information isn't very
+ interesting to those making local builds for private use or for use
+ in special situations like embedded systems.
+
+
+1. Supported platforms
+----------------------
+
+ XZ Utils are developed on GNU/Linux, but they should work on many
+ POSIX-like operating systems like *BSDs and Solaris, and even on
+ a few non-POSIX operating systems.
+
+
+1.1. Compilers
+
+ A C99 compiler is required to compile XZ Utils. If you use GCC, you
+ need at least version 3.x.x. GCC version 2.xx.x doesn't support some
+ C99 features used in XZ Utils source code, thus GCC 2 won't compile
+ XZ Utils.
+
+ XZ Utils takes advantage of some GNU C extensions when building
+ with GCC. Because these extensions are used only when building
+ with GCC, it should be possible to use any C99 compiler.
+
+
+1.2. Platform-specific notes
+
+1.2.1. Darwin (Mac OS X)
+
+ You may need --disable-assembler if building universal binaries on
+ Darwin. This is because different files are built when assembler is
+ enabled, and there's no way to make it work with universal build.
+ If you want to keep the assembler code, consider building one
+ architecture at a time, and then combining the results to create
+ universal binaries (see lipo(1)).
+
+
+1.2.2. Tru64
+
+ If you try to use the native C compiler on Tru64 (passing CC=cc to
+ configure), it is possible that the configure script will complain
+ that no C99 compiler was found even when the native compiler supports
+ C99. You can safely override the test for C99 compiler by passing
+ ac_cv_prog_cc_c99= as the argument to the configure script.
+
+
+1.2.3. Windows
+
+ Building XZ Utils on Windows is supported under MinGW and Cygwin.
+ If the Autotools based build gives you trouble with MinGW, you may
+ want try the alternative method found from the "windows" directory.
+
+ MSVC doesn't support C99, thus it is not possible to use MSVC to
+ compile XZ Utils. However, it is possible to use liblzma.dll from
+ MSVC once liblzma.dll has been built with MinGW. The required
+ import library for MSVC can be created from liblzma.def using the
+ "lib" command shipped in MSVC:
+
+ lib /def:liblzma.def /out:liblzma.lib /machine:ix86
+
+ On x86-64, the /machine argument has to naturally be changed:
+
+ lib /def:liblzma.def /out:liblzma.lib /machine:x64
+
+
+1.2.4. DOS
+
+ There is an experimental Makefile in the "dos" directory to build
+ XZ Utils on DOS using DJGPP. Support for long file names (LFN) is
+ needed.
+
+ GNU Autotools based build hasn't been tried on DOS.
+
+
+1.2.5. OS/2
+
+ You will need to pass --disable-assembler to configure when building
+ on OS/2.
+
+
+1.3. Adding support for new platforms
+
+ If you have written patches to make XZ Utils to work on previously
+ unsupported platform, please send the patches to me! I will consider
+ including them to the official version. It's nice to minimize the
+ need of third-party patching.
+
+ One exception: Don't request or send patches to change the whole
+ source package to C89. I find C99 substantially nicer to write and
+ maintain. However, the public library headers must be in C89 to
+ avoid frustrating those who maintain programs, which are strictly
+ in C89 or C++.
+
+
+2. configure options
+--------------------
+
+ In most cases, the defaults are what you want. Most of the options
+ below are useful only when building a size-optimized version of
+ liblzma or command line tools.
+
+ --enable-encoders=LIST
+ --disable-encoders
+ Specify a comma-separated LIST of filter encoders to
+ build. See "./configure --help" for exact list of
+ available filter encoders. The default is to build all
+ supported encoders.
+
+ If LIST is empty or --disable-encoders is used, no filter
+ encoders will be built and also the code shared between
+ encoders will be omitted.
+
+ Disabling encoders will remove some symbols from the
+ liblzma ABI, so this option should be used only when it
+ is known to not cause problems.
+
+ --enable-decoders=LIST
+ --disable-decoders
+ This is like --enable-encoders but for decoders. The
+ default is to build all supported decoders.
+
+ --enable-match-finders=LIST
+ liblzma includes two categories of match finders:
+ hash chains and binary trees. Hash chains (hc3 and hc4)
+ are quite fast but they don't provide the best compression
+ ratio. Binary trees (bt2, bt3 and bt4) give excellent
+ compression ratio, but they are slower and need more
+ memory than hash chains.
+
+ You need to enable at least one match finder to build the
+ LZMA1 or LZMA2 filter encoders. Usually hash chains are
+ used only in the fast mode, while binary trees are used to
+ when the best compression ratio is wanted.
+
+ The default is to build all the match finders if LZMA1
+ or LZMA2 filter encoders are being built.
+
+ --enable-checks=LIST
+ liblzma support multiple integrity checks. CRC32 is
+ mandatory, and cannot be omitted. See "./configure --help"
+ for exact list of available integrity check types.
+
+ liblzma and the command line tools can decompress files
+ which use unsupported integrity check type, but naturally
+ the file integrity cannot be verified in that case.
+
+ Disabling integrity checks may remove some symbols from
+ the liblzma ABI, so this option should be used only when
+ it is known to not cause problems.
+
+ --disable-assembler
+ liblzma includes some assembler optimizations. Currently
+ there is only assembler code for CRC32 and CRC64 for
+ 32-bit x86.
+
+ All the assembler code in liblzma is position-independent
+ code, which is suitable for use in shared libraries and
+ position-independent executables. So far only i386
+ instructions are used, but the code is optimized for i686
+ class CPUs. If you are compiling liblzma exclusively for
+ pre-i686 systems, you may want to disable the assembler
+ code.
+
+ --enable-unaligned-access
+ Allow liblzma to use unaligned memory access for 16-bit
+ and 32-bit loads and stores. This should be enabled only
+ when the hardware supports this, i.e. when unaligned
+ access is fast. Some operating system kernels emulate
+ unaligned access, which is extremely slow. This option
+ shouldn't be used on systems that rely on such emulation.
+
+ Unaligned access is enabled by default on x86, x86-64,
+ and big endian PowerPC.
+
+ --enable-small
+ Reduce the size of liblzma by selecting smaller but
+ semantically equivalent version of some functions, and
+ omit precomputed lookup tables. This option tends to
+ make liblzma slightly slower.
+
+ Note that while omitting the precomputed tables makes
+ liblzma smaller on disk, the tables are still needed at
+ run time, and need to be computed at startup. This also
+ means that the RAM holding the tables won't be shared
+ between applications linked against shared liblzma.
+
+ --disable-threads
+ Disable threading support. This makes some things
+ thread-unsafe, meaning that if multithreaded application
+ calls liblzma functions from more than one thread,
+ something bad may happen.
+
+ Use this option if threading support causes you trouble,
+ or if you know that you will use liblzma only from
+ single-threaded applications and want to avoid dependency
+ on libpthread.
+
+ --enable-dynamic=TYPE
+ Specify how command line tools should be linked against
+ liblzma. Possible TYPES:
+
+ yes All command line tools are linked against
+ shared liblzma (if shared liblzma was built).
+ This is equivalent to --enable-dynamic (i.e.
+ no =TYPE).
+
+ mixed Some tools are linked against static liblzma
+ and some against shared liblzma. This is the
+ default and recommended way.
+
+ no All command line tools are linked against
+ static liblzma (if static liblzma was built).
+ This is equivalent to --disable-dynamic.
+
+ This option is mostly useful for packagers, if distro
+ policy requires linking against shared libaries. See the
+ file PACKAGERS for more information about pros and cons
+ of this option.
+
+ --enable-debug
+ This enables the assert() macro and possibly some other
+ run-time consistency checks. It makes the code slower, so
+ you normally don't want to have this enabled.
+
+ --enable-werror
+ If building with GCC, make all compiler warnings an error,
+ that abort the compilation. This may help catching bugs,
+ and should work on most systems. This has no effect on the
+ resulting binaries.
+
+
+3. xzgrep and other scripts
+---------------------------
+
+3.1. Dependencies
+
+ POSIX shell (sh) and bunch of other standard POSIX tools are required
+ to run the scripts. The configure script tries to find a POSIX
+ compliant sh, but if it fails, you can force the shell by passing
+ gl_cv_posix_shell=/path/to/posix-sh as an argument to the configure
+ script.
+
+ Some of the scripts require also mktemp. The original mktemp can be
+ found from <http://www.mktemp.org/>. On GNU, most will use the mktemp
+ program from GNU coreutils instead of the original implementation.
+ Both mktemp versions are fine for XZ Utils (and practically for
+ everything else too).
+
+
+3.2. PATH
+
+ The scripts assume that the required tools (standard POSIX utilities,
+ mktemp, and xz) are in PATH; the scripts don't set the PATH themselves.
+ Some people like this while some think this is a bug. Those in the
+ latter group can easily patch the scripts before running the configure
+ script by taking advantage of a placeholder line in the scripts.
+
+ For example, to make the scripts prefix /usr/bin:/bin to PATH:
+
+ perl -pi -e 's|^#SET_PATH.*$|PATH=/usr/bin:/bin:\$PATH|' \
+ src/scripts/xz*.in
+
+
+4. Troubleshooting
+------------------
+
+4.1. "No C99 compiler was found."
+
+ You need a C99 compiler to build XZ Utils. If the configure script
+ cannot find a C99 compiler and you think you have such a compiler
+ installed, set the compiler command by passing CC=/path/to/c99 as
+ an argument to the configure script.
+
+ If you get this error even when you think your compiler supports C99,
+ you can override the test by passing ac_cv_prog_cc_c99= as an argument
+ to the configure script. The test for C99 compiler is not perfect (and
+ it is not as easy to make it perfect as it sounds), so sometimes this
+ may be needed. You will get a compile error if your compiler doesn't
+ support enough C99.
+
+
+4.1. "No POSIX conforming shell (sh) was found."
+
+ xzgrep and other scripts need a shell that (roughly) conforms
+ to POSIX. The configure script tries to find such a shell. If
+ it fails, you can force the shell to be used by passing
+ gl_cv_posix_shell=/path/to/posix-sh as an argument to the configure
+ script.
+
+
+4.2. configure works but build fails at crc32_x86.S
+
+ The easy fix is to pass --disable-assembler to the configure script.
+
+ The configure script determines if assembler code can be used by
+ looking at the configure triplet; there is currently no check if
+ the assembler code can actually actually be built. The x86 assembler
+ code should work on x86 GNU/Linux, *BSDs, Solaris, Darwin, MinGW,
+ Cygwin, and DJGPP. On other x86 systems, there may be problems and
+ the assembler code may need to be disabled with the configure option.
+
+ If you get this error when building for x86-64, you have specified or
+ the configure script has misguessed your architecture. Pass the
+ correct configure triplet using the --build=CPU-COMPANY-SYSTEM option
+ (see INSTALL.generic).
+
diff --git a/Build/source/utils/xz-4.999.8beta/INSTALL b/Build/source/utils/xz-4.999.9beta/INSTALL.generic
index 23e5f25d0e5..2550dab7526 100644
--- a/Build/source/utils/xz-4.999.8beta/INSTALL
+++ b/Build/source/utils/xz-4.999.9beta/INSTALL.generic
@@ -1,16 +1,19 @@
Installation Instructions
*************************
-Copyright (C) 1994, 1995, 1996, 1999, 2000, 2001, 2002, 2004, 2005 Free
-Software Foundation, Inc.
+Copyright (C) 1994, 1995, 1996, 1999, 2000, 2001, 2002, 2004, 2005,
+2006, 2007, 2008, 2009 Free Software Foundation, Inc.
-This file is free documentation; the Free Software Foundation gives
+ This file is free documentation; the Free Software Foundation gives
unlimited permission to copy, distribute and modify it.
Basic Installation
==================
-These are generic installation instructions.
+ Briefly, the shell commands `./configure; make; make install' should
+configure, build, and install this package. The following
+more-detailed instructions are generic; see the `README' file for
+instructions specific to this package.
The `configure' shell script attempts to guess correct values for
various system-dependent variables used during compilation. It uses
@@ -23,9 +26,9 @@ debugging `configure').
It can also use an optional file (typically called `config.cache'
and enabled with `--cache-file=config.cache' or simply `-C') that saves
-the results of its tests to speed up reconfiguring. (Caching is
+the results of its tests to speed up reconfiguring. Caching is
disabled by default to prevent problems with accidental use of stale
-cache files.)
+cache files.
If you need to do unusual things to compile the package, please try
to figure out how `configure' could check whether to do them, and mail
@@ -35,20 +38,17 @@ some point `config.cache' contains results you don't want to keep, you
may remove or edit it.
The file `configure.ac' (or `configure.in') is used to create
-`configure' by a program called `autoconf'. You only need
-`configure.ac' if you want to change it or regenerate `configure' using
-a newer version of `autoconf'.
+`configure' by a program called `autoconf'. You need `configure.ac' if
+you want to change it or regenerate `configure' using a newer version
+of `autoconf'.
The simplest way to compile this package is:
1. `cd' to the directory containing the package's source code and type
- `./configure' to configure the package for your system. If you're
- using `csh' on an old version of System V, you might need to type
- `sh ./configure' instead to prevent `csh' from trying to execute
- `configure' itself.
+ `./configure' to configure the package for your system.
- Running `configure' takes awhile. While running, it prints some
- messages telling which features it is checking for.
+ Running `configure' might take a while. While running, it prints
+ some messages telling which features it is checking for.
2. Type `make' to compile the package.
@@ -67,42 +67,57 @@ The simplest way to compile this package is:
all sorts of other programs in order to regenerate files that came
with the distribution.
+ 6. Often, you can also type `make uninstall' to remove the installed
+ files again.
+
Compilers and Options
=====================
-Some systems require unusual options for compilation or linking that the
-`configure' script does not know about. Run `./configure --help' for
-details on some of the pertinent environment variables.
+ Some systems require unusual options for compilation or linking that
+the `configure' script does not know about. Run `./configure --help'
+for details on some of the pertinent environment variables.
You can give `configure' initial values for configuration parameters
by setting variables in the command line or in the environment. Here
is an example:
- ./configure CC=c89 CFLAGS=-O2 LIBS=-lposix
+ ./configure CC=c99 CFLAGS=-g LIBS=-lposix
*Note Defining Variables::, for more details.
Compiling For Multiple Architectures
====================================
-You can compile the package for more than one kind of computer at the
+ You can compile the package for more than one kind of computer at the
same time, by placing the object files for each architecture in their
-own directory. To do this, you must use a version of `make' that
-supports the `VPATH' variable, such as GNU `make'. `cd' to the
+own directory. To do this, you can use GNU `make'. `cd' to the
directory where you want the object files and executables to go and run
the `configure' script. `configure' automatically checks for the
source code in the directory that `configure' is in and in `..'.
- If you have to use a `make' that does not support the `VPATH'
-variable, you have to compile the package for one architecture at a
-time in the source code directory. After you have installed the
-package for one architecture, use `make distclean' before reconfiguring
-for another architecture.
+ With a non-GNU `make', it is safer to compile the package for one
+architecture at a time in the source code directory. After you have
+installed the package for one architecture, use `make distclean' before
+reconfiguring for another architecture.
+
+ On MacOS X 10.5 and later systems, you can create libraries and
+executables that work on multiple system types--known as "fat" or
+"universal" binaries--by specifying multiple `-arch' options to the
+compiler but only a single `-arch' option to the preprocessor. Like
+this:
+
+ ./configure CC="gcc -arch i386 -arch x86_64 -arch ppc -arch ppc64" \
+ CXX="g++ -arch i386 -arch x86_64 -arch ppc -arch ppc64" \
+ CPP="gcc -E" CXXCPP="g++ -E"
+
+ This is not guaranteed to produce working output in all cases, you
+may have to build one architecture at a time and combine the results
+using the `lipo' tool if you have problems.
Installation Names
==================
-By default, `make install' installs the package's commands under
+ By default, `make install' installs the package's commands under
`/usr/local/bin', include files under `/usr/local/include', etc. You
can specify an installation prefix other than `/usr/local' by giving
`configure' the option `--prefix=PREFIX'.
@@ -125,7 +140,7 @@ option `--program-prefix=PREFIX' or `--program-suffix=SUFFIX'.
Optional Features
=================
-Some packages pay attention to `--enable-FEATURE' options to
+ Some packages pay attention to `--enable-FEATURE' options to
`configure', where FEATURE indicates an optional part of the package.
They may also pay attention to `--with-PACKAGE' options, where PACKAGE
is something like `gnu-as' or `x' (for the X Window System). The
@@ -137,14 +152,46 @@ find the X include and library files automatically, but if it doesn't,
you can use the `configure' options `--x-includes=DIR' and
`--x-libraries=DIR' to specify their locations.
+Particular systems
+==================
+
+ On HP-UX, the default C compiler is not ANSI C compatible. If GNU
+CC is not installed, it is recommended to use the following options in
+order to use an ANSI C compiler:
+
+ ./configure CC="cc -Ae -D_XOPEN_SOURCE=500"
+
+and if that doesn't work, install pre-built binaries of GCC for HP-UX.
+
+ On OSF/1 a.k.a. Tru64, some versions of the default C compiler cannot
+parse its `<wchar.h>' header file. The option `-nodtk' can be used as
+a workaround. If GNU CC is not installed, it is therefore recommended
+to try
+
+ ./configure CC="cc"
+
+and if that doesn't work, try
+
+ ./configure CC="cc -nodtk"
+
+ On Solaris, don't put `/usr/ucb' early in your `PATH'. This
+directory contains several dysfunctional programs; working variants of
+these programs are available in `/usr/bin'. So, if you need `/usr/ucb'
+in your `PATH', put it _after_ `/usr/bin'.
+
+ On Haiku, software installed for all users goes in `/boot/common',
+not `/usr/local'. It is recommended to use the following options:
+
+ ./configure --prefix=/boot/common
+
Specifying the System Type
==========================
-There may be some features `configure' cannot figure out automatically,
-but needs to determine by the type of machine the package will run on.
-Usually, assuming the package is built to be run on the _same_
-architectures, `configure' can figure that out, but if it prints a
-message saying it cannot guess the machine type, give it the
+ There may be some features `configure' cannot figure out
+automatically, but needs to determine by the type of machine the package
+will run on. Usually, assuming the package is built to be run on the
+_same_ architectures, `configure' can figure that out, but if it prints
+a message saying it cannot guess the machine type, give it the
`--build=TYPE' option. TYPE can either be a short name for the system
type, such as `sun4', or a canonical name which has the form:
@@ -152,7 +199,8 @@ type, such as `sun4', or a canonical name which has the form:
where SYSTEM can have one of these forms:
- OS KERNEL-OS
+ OS
+ KERNEL-OS
See the file `config.sub' for the possible values of each field. If
`config.sub' isn't included in this package, then this package doesn't
@@ -170,9 +218,9 @@ eventually be run) with `--host=TYPE'.
Sharing Defaults
================
-If you want to set default values for `configure' scripts to share, you
-can create a site shell script called `config.site' that gives default
-values for variables like `CC', `cache_file', and `prefix'.
+ If you want to set default values for `configure' scripts to share,
+you can create a site shell script called `config.site' that gives
+default values for variables like `CC', `cache_file', and `prefix'.
`configure' looks for `PREFIX/share/config.site' if it exists, then
`PREFIX/etc/config.site' if it exists. Or, you can set the
`CONFIG_SITE' environment variable to the location of the site script.
@@ -181,7 +229,7 @@ A warning: not all `configure' scripts look for a site script.
Defining Variables
==================
-Variables not defined in a site shell script can be set in the
+ Variables not defined in a site shell script can be set in the
environment passed to `configure'. However, some packages may run
configure again during the build, and the customized values of these
variables may be lost. In order to avoid this problem, you should set
@@ -190,21 +238,29 @@ them in the `configure' command line, using `VAR=value'. For example:
./configure CC=/usr/local2/bin/gcc
causes the specified `gcc' to be used as the C compiler (unless it is
-overridden in the site shell script). Here is a another example:
+overridden in the site shell script).
- /bin/bash ./configure CONFIG_SHELL=/bin/bash
+Unfortunately, this technique does not work for `CONFIG_SHELL' due to
+an Autoconf bug. Until the bug is fixed you can use this workaround:
-Here the `CONFIG_SHELL=/bin/bash' operand causes subsequent
-configuration-related scripts to be executed by `/bin/bash'.
+ CONFIG_SHELL=/bin/bash /bin/bash ./configure CONFIG_SHELL=/bin/bash
`configure' Invocation
======================
-`configure' recognizes the following options to control how it operates.
+ `configure' recognizes the following options to control how it
+operates.
`--help'
`-h'
- Print a summary of the options to `configure', and exit.
+ Print a summary of all of the options to `configure', and exit.
+
+`--help=short'
+`--help=recursive'
+ Print a summary of the options unique to this package's
+ `configure', and exit. The `short' variant lists options used
+ only in the top level, while the `recursive' variant lists options
+ also present in any nested packages.
`--version'
`-V'
@@ -231,6 +287,16 @@ configuration-related scripts to be executed by `/bin/bash'.
Look for the package's source code in directory DIR. Usually
`configure' can determine that directory automatically.
+`--prefix=DIR'
+ Use DIR as the installation prefix. *Note Installation Names::
+ for more details, including other options available for fine-tuning
+ the installation locations.
+
+`--no-create'
+`-n'
+ Run the configure checks, but stop before creating any output
+ files.
+
`configure' also accepts some other, not widely useful, options. Run
`configure --help' for more details.
diff --git a/Build/source/utils/xz-4.999.9beta/Makefile.am b/Build/source/utils/xz-4.999.9beta/Makefile.am
new file mode 100644
index 00000000000..79cf1954f28
--- /dev/null
+++ b/Build/source/utils/xz-4.999.9beta/Makefile.am
@@ -0,0 +1,80 @@
+##
+## Author: Lasse Collin
+##
+## This file has been put into the public domain.
+## You can do whatever you want with this file.
+##
+
+DIST_SUBDIRS = lib src po tests debug
+SUBDIRS =
+
+if COND_GNULIB
+SUBDIRS += lib
+endif
+
+SUBDIRS += src po tests
+
+dist_doc_DATA = \
+ AUTHORS \
+ COPYING \
+ COPYING.GPLv2 \
+ NEWS \
+ README \
+ THANKS \
+ TODO \
+ doc/faq.txt \
+ doc/history.txt \
+ doc/xz-file-format.txt \
+ doc/lzma-file-format.txt
+
+EXTRA_DIST = \
+ extra \
+ dos \
+ windows \
+ autogen.sh \
+ version.sh \
+ Doxyfile.in \
+ COPYING.GPLv2 \
+ COPYING.GPLv3 \
+ COPYING.LGPLv2.1 \
+ INSTALL.generic \
+ PACKAGERS
+
+ACLOCAL_AMFLAGS = -I m4
+
+# List of man pages to conver to PDF and plain text in the dist-hook target.
+manfiles = \
+ src/xz/xz.1 \
+ src/xzdec/xzdec.1 \
+ src/scripts/xzdiff.1 \
+ src/scripts/xzgrep.1 \
+ src/scripts/xzless.1 \
+ src/scripts/xzmore.1
+
+# Create ChangeLog from output of "git log --date=iso --stat".
+# Convert the man pages to PDF and plain text (ASCII only) formats.
+dist-hook:
+ if test -d "$(srcdir)/.git" && type git > /dev/null 2>&1; then \
+ ( cd "$(srcdir)" && git log --date=iso --stat ) \
+ > "$(distdir)/ChangeLog"; \
+ fi
+ if type groff > /dev/null 2>&1 && type ps2pdf > /dev/null 2>&1; then \
+ dest="$(distdir)/doc/man" && \
+ $(MKDIR_P) "$$dest/pdf-a4" "$$dest/pdf-letter" "$$dest/txt" && \
+ for FILE in $(manfiles); do \
+ BASE=`basename $$FILE .1` && \
+ groff -man -t -Tps -P-pa4 < "$(srcdir)/$$FILE" \
+ | ps2pdf - - \
+ > "$$dest/pdf-a4/$$BASE-a4.pdf" && \
+ groff -man -t -Tps -P-pletter < "$(srcdir)/$$FILE" \
+ | ps2pdf - - \
+ > "$$dest/pdf-letter/$$BASE-letter.pdf" && \
+ groff -man -t -Tascii < "$(srcdir)/$$FILE" \
+ | col -bx > "$$dest/txt/$$BASE.txt"; \
+ done; \
+ fi
+
+# This works with GNU tar and gives cleaner package than normal 'make dist'.
+mydist:
+ TAR_OPTIONS='--owner=0 --group=0 --numeric-owner --mode=u+rw,go+r-w' \
+ $(MAKE) dist-gzip
diff --git a/Build/source/utils/xz-4.999.8beta/Makefile.in b/Build/source/utils/xz-4.999.9beta/Makefile.in
index 626e5291166..eef55e610bf 100644
--- a/Build/source/utils/xz-4.999.8beta/Makefile.in
+++ b/Build/source/utils/xz-4.999.9beta/Makefile.in
@@ -1,8 +1,9 @@
-# Makefile.in generated by automake 1.10.2 from Makefile.am.
+# Makefile.in generated by automake 1.11 from Makefile.am.
# @configure_input@
# Copyright (C) 1994, 1995, 1996, 1997, 1998, 1999, 2000, 2001, 2002,
-# 2003, 2004, 2005, 2006, 2007, 2008 Free Software Foundation, Inc.
+# 2003, 2004, 2005, 2006, 2007, 2008, 2009 Free Software Foundation,
+# Inc.
# This Makefile.in is free software; the Free Software Foundation
# gives unlimited permission to copy and/or distribute it,
# with or without modifications, as long as this notice is preserved.
@@ -13,10 +14,12 @@
# PARTICULAR PURPOSE.
@SET_MAKE@
+
VPATH = @srcdir@
pkgdatadir = $(datadir)/@PACKAGE@
-pkglibdir = $(libdir)/@PACKAGE@
pkgincludedir = $(includedir)/@PACKAGE@
+pkglibdir = $(libdir)/@PACKAGE@
+pkglibexecdir = $(libexecdir)/@PACKAGE@
am__cd = CDPATH="$${ZSH_VERSION+.}$(PATH_SEPARATOR)" && cd
install_sh_DATA = $(install_sh) -c -m 644
install_sh_PROGRAM = $(install_sh) -c
@@ -33,19 +36,26 @@ build_triplet = @build@
host_triplet = @host@
@COND_GNULIB_TRUE@am__append_1 = lib
subdir = .
-DIST_COMMON = README $(am__configure_deps) $(srcdir)/Doxyfile.in \
- $(srcdir)/Makefile.am $(srcdir)/Makefile.in \
- $(srcdir)/config.h.in $(top_srcdir)/configure ABOUT-NLS \
- AUTHORS COPYING ChangeLog INSTALL NEWS THANKS TODO compile \
- config.guess config.rpath config.sub depcomp install-sh \
- ltmain.sh missing
+DIST_COMMON = README $(am__configure_deps) $(dist_doc_DATA) \
+ $(srcdir)/Doxyfile.in $(srcdir)/Makefile.am \
+ $(srcdir)/Makefile.in $(srcdir)/config.h.in \
+ $(top_srcdir)/configure ABOUT-NLS AUTHORS COPYING ChangeLog \
+ INSTALL NEWS THANKS TODO build-aux/compile \
+ build-aux/config.guess build-aux/config.rpath \
+ build-aux/config.sub build-aux/depcomp build-aux/install-sh \
+ build-aux/ltmain.sh build-aux/missing
ACLOCAL_M4 = $(top_srcdir)/aclocal.m4
am__aclocal_m4_deps = $(top_srcdir)/m4/acx_pthread.m4 \
$(top_srcdir)/m4/getopt.m4 $(top_srcdir)/m4/gettext.m4 \
- $(top_srcdir)/m4/iconv.m4 $(top_srcdir)/m4/lib-ld.m4 \
+ $(top_srcdir)/m4/iconv.m4 $(top_srcdir)/m4/lc_cpucores.m4 \
+ $(top_srcdir)/m4/lc_physmem.m4 $(top_srcdir)/m4/lib-ld.m4 \
$(top_srcdir)/m4/lib-link.m4 $(top_srcdir)/m4/lib-prefix.m4 \
- $(top_srcdir)/m4/nls.m4 $(top_srcdir)/m4/po.m4 \
- $(top_srcdir)/m4/progtest.m4 $(top_srcdir)/configure.ac
+ $(top_srcdir)/m4/libtool.m4 $(top_srcdir)/m4/ltoptions.m4 \
+ $(top_srcdir)/m4/ltsugar.m4 $(top_srcdir)/m4/ltversion.m4 \
+ $(top_srcdir)/m4/lt~obsolete.m4 $(top_srcdir)/m4/nls.m4 \
+ $(top_srcdir)/m4/po.m4 $(top_srcdir)/m4/posix-shell.m4 \
+ $(top_srcdir)/m4/progtest.m4 $(top_srcdir)/m4/visibility.m4 \
+ $(top_srcdir)/configure.ac
am__configure_deps = $(am__aclocal_m4_deps) $(CONFIGURE_DEPENDENCIES) \
$(ACLOCAL_M4)
am__CONFIG_DISTCLEAN_FILES = config.status config.cache config.log \
@@ -53,6 +63,7 @@ am__CONFIG_DISTCLEAN_FILES = config.status config.cache config.log \
mkinstalldirs = $(install_sh) -d
CONFIG_HEADER = config.h
CONFIG_CLEAN_FILES = Doxyfile
+CONFIG_CLEAN_VPATH_FILES =
SOURCES =
DIST_SOURCES =
RECURSIVE_TARGETS = all-recursive check-recursive dvi-recursive \
@@ -62,24 +73,77 @@ RECURSIVE_TARGETS = all-recursive check-recursive dvi-recursive \
install-pdf-recursive install-ps-recursive install-recursive \
installcheck-recursive installdirs-recursive pdf-recursive \
ps-recursive uninstall-recursive
+am__vpath_adj_setup = srcdirstrip=`echo "$(srcdir)" | sed 's|.|.|g'`;
+am__vpath_adj = case $$p in \
+ $(srcdir)/*) f=`echo "$$p" | sed "s|^$$srcdirstrip/||"`;; \
+ *) f=$$p;; \
+ esac;
+am__strip_dir = f=`echo $$p | sed -e 's|^.*/||'`;
+am__install_max = 40
+am__nobase_strip_setup = \
+ srcdirstrip=`echo "$(srcdir)" | sed 's/[].[^$$\\*|]/\\\\&/g'`
+am__nobase_strip = \
+ for p in $$list; do echo "$$p"; done | sed -e "s|$$srcdirstrip/||"
+am__nobase_list = $(am__nobase_strip_setup); \
+ for p in $$list; do echo "$$p $$p"; done | \
+ sed "s| $$srcdirstrip/| |;"' / .*\//!s/ .*/ ./; s,\( .*\)/[^/]*$$,\1,' | \
+ $(AWK) 'BEGIN { files["."] = "" } { files[$$2] = files[$$2] " " $$1; \
+ if (++n[$$2] == $(am__install_max)) \
+ { print $$2, files[$$2]; n[$$2] = 0; files[$$2] = "" } } \
+ END { for (dir in files) print dir, files[dir] }'
+am__base_list = \
+ sed '$$!N;$$!N;$$!N;$$!N;$$!N;$$!N;$$!N;s/\n/ /g' | \
+ sed '$$!N;$$!N;$$!N;$$!N;s/\n/ /g'
+am__installdirs = "$(DESTDIR)$(docdir)"
+DATA = $(dist_doc_DATA)
RECURSIVE_CLEAN_TARGETS = mostlyclean-recursive clean-recursive \
distclean-recursive maintainer-clean-recursive
+AM_RECURSIVE_TARGETS = $(RECURSIVE_TARGETS:-recursive=) \
+ $(RECURSIVE_CLEAN_TARGETS:-recursive=) tags TAGS ctags CTAGS \
+ distdir dist dist-all distcheck
ETAGS = etags
CTAGS = ctags
DISTFILES = $(DIST_COMMON) $(DIST_SOURCES) $(TEXINFOS) $(EXTRA_DIST)
distdir = $(PACKAGE)-$(VERSION)
top_distdir = $(distdir)
am__remove_distdir = \
- { test ! -d $(distdir) \
- || { find $(distdir) -type d ! -perm -200 -exec chmod u+w {} ';' \
- && rm -fr $(distdir); }; }
+ { test ! -d "$(distdir)" \
+ || { find "$(distdir)" -type d ! -perm -200 -exec chmod u+w {} ';' \
+ && rm -fr "$(distdir)"; }; }
+am__relativize = \
+ dir0=`pwd`; \
+ sed_first='s,^\([^/]*\)/.*$$,\1,'; \
+ sed_rest='s,^[^/]*/*,,'; \
+ sed_last='s,^.*/\([^/]*\)$$,\1,'; \
+ sed_butlast='s,/*[^/]*$$,,'; \
+ while test -n "$$dir1"; do \
+ first=`echo "$$dir1" | sed -e "$$sed_first"`; \
+ if test "$$first" != "."; then \
+ if test "$$first" = ".."; then \
+ dir2=`echo "$$dir0" | sed -e "$$sed_last"`/"$$dir2"; \
+ dir0=`echo "$$dir0" | sed -e "$$sed_butlast"`; \
+ else \
+ first2=`echo "$$dir2" | sed -e "$$sed_first"`; \
+ if test "$$first2" = "$$first"; then \
+ dir2=`echo "$$dir2" | sed -e "$$sed_rest"`; \
+ else \
+ dir2="../$$dir2"; \
+ fi; \
+ dir0="$$dir0"/"$$first"; \
+ fi; \
+ fi; \
+ dir1=`echo "$$dir1" | sed -e "$$sed_rest"`; \
+ done; \
+ reldir="$$dir2"
DIST_ARCHIVES = $(distdir).tar.gz
GZIP_ENV = --best
distuninstallcheck_listfiles = find . -type f -print
distcleancheck_listfiles = find . -type f -print
ACLOCAL = @ACLOCAL@
AMTAR = @AMTAR@
+AM_CFLAGS = @AM_CFLAGS@
AR = @AR@
+AS = @AS@
AUTOCONF = @AUTOCONF@
AUTOHEADER = @AUTOHEADER@
AUTOMAKE = @AUTOMAKE@
@@ -93,22 +157,20 @@ CFLAGS = @CFLAGS@
CFLAG_VISIBILITY = @CFLAG_VISIBILITY@
CPP = @CPP@
CPPFLAGS = @CPPFLAGS@
-CXX = @CXX@
-CXXCPP = @CXXCPP@
-CXXDEPMODE = @CXXDEPMODE@
-CXXFLAGS = @CXXFLAGS@
CYGPATH_W = @CYGPATH_W@
DEFS = @DEFS@
DEPDIR = @DEPDIR@
+DLLTOOL = @DLLTOOL@
DSYMUTIL = @DSYMUTIL@
-ECHO = @ECHO@
+DUMPBIN = @DUMPBIN@
+DYNAMIC_CPPFLAGS = @DYNAMIC_CPPFLAGS@
+DYNAMIC_LDFLAGS = @DYNAMIC_LDFLAGS@
ECHO_C = @ECHO_C@
ECHO_N = @ECHO_N@
ECHO_T = @ECHO_T@
EGREP = @EGREP@
EXEEXT = @EXEEXT@
-F77 = @F77@
-FFLAGS = @FFLAGS@
+FGREP = @FGREP@
GETOPT_H = @GETOPT_H@
GMSGFMT = @GMSGFMT@
GMSGFMT_015 = @GMSGFMT_015@
@@ -121,12 +183,14 @@ INSTALL_SCRIPT = @INSTALL_SCRIPT@
INSTALL_STRIP_PROGRAM = @INSTALL_STRIP_PROGRAM@
INTLLIBS = @INTLLIBS@
INTL_MACOSX_LIBS = @INTL_MACOSX_LIBS@
+LD = @LD@
LDFLAGS = @LDFLAGS@
LIBICONV = @LIBICONV@
LIBINTL = @LIBINTL@
LIBOBJS = @LIBOBJS@
LIBS = @LIBS@
LIBTOOL = @LIBTOOL@
+LIPO = @LIPO@
LN_S = @LN_S@
LTLIBICONV = @LTLIBICONV@
LTLIBINTL = @LTLIBINTL@
@@ -136,23 +200,34 @@ MKDIR_P = @MKDIR_P@
MSGFMT = @MSGFMT@
MSGFMT_015 = @MSGFMT_015@
MSGMERGE = @MSGMERGE@
+NM = @NM@
NMEDIT = @NMEDIT@
+OBJDUMP = @OBJDUMP@
OBJEXT = @OBJEXT@
+OTOOL = @OTOOL@
+OTOOL64 = @OTOOL64@
PACKAGE = @PACKAGE@
PACKAGE_BUGREPORT = @PACKAGE_BUGREPORT@
+PACKAGE_HOMEPAGE = @PACKAGE_HOMEPAGE@
PACKAGE_NAME = @PACKAGE_NAME@
PACKAGE_STRING = @PACKAGE_STRING@
PACKAGE_TARNAME = @PACKAGE_TARNAME@
+PACKAGE_URL = @PACKAGE_URL@
PACKAGE_VERSION = @PACKAGE_VERSION@
PATH_SEPARATOR = @PATH_SEPARATOR@
+POSIX_SHELL = @POSIX_SHELL@
POSUB = @POSUB@
+PREFERABLY_POSIX_SHELL = @PREFERABLY_POSIX_SHELL@
PTHREAD_CC = @PTHREAD_CC@
PTHREAD_CFLAGS = @PTHREAD_CFLAGS@
PTHREAD_LIBS = @PTHREAD_LIBS@
RANLIB = @RANLIB@
+RC = @RC@
SED = @SED@
SET_MAKE = @SET_MAKE@
SHELL = @SHELL@
+STATIC_CPPFLAGS = @STATIC_CPPFLAGS@
+STATIC_LDFLAGS = @STATIC_LDFLAGS@
STRIP = @STRIP@
USE_NLS = @USE_NLS@
VERSION = @VERSION@
@@ -163,8 +238,7 @@ abs_srcdir = @abs_srcdir@
abs_top_builddir = @abs_top_builddir@
abs_top_srcdir = @abs_top_srcdir@
ac_ct_CC = @ac_ct_CC@
-ac_ct_CXX = @ac_ct_CXX@
-ac_ct_F77 = @ac_ct_F77@
+ac_ct_DUMPBIN = @ac_ct_DUMPBIN@
acx_pthread_config = @acx_pthread_config@
am__include = @am__include@
am__leading_dot = @am__leading_dot@
@@ -196,6 +270,7 @@ libdir = @libdir@
libexecdir = @libexecdir@
localedir = @localedir@
localstatedir = @localstatedir@
+lt_ECHO = @lt_ECHO@
mandir = @mandir@
mkdir_p = @mkdir_p@
oldincludedir = @oldincludedir@
@@ -211,19 +286,46 @@ target_alias = @target_alias@
top_build_prefix = @top_build_prefix@
top_builddir = @top_builddir@
top_srcdir = @top_srcdir@
+xz = @xz@
DIST_SUBDIRS = lib src po tests debug
SUBDIRS = $(am__append_1) src po tests
+dist_doc_DATA = \
+ AUTHORS \
+ COPYING \
+ COPYING.GPLv2 \
+ NEWS \
+ README \
+ THANKS \
+ TODO \
+ doc/faq.txt \
+ doc/history.txt \
+ doc/xz-file-format.txt \
+ doc/lzma-file-format.txt
+
EXTRA_DIST = \
- config.rpath \
- Doxyfile.in \
extra \
- doc \
+ dos \
windows \
+ autogen.sh \
+ version.sh \
+ Doxyfile.in \
COPYING.GPLv2 \
COPYING.GPLv3 \
- COPYING.LGPLv2.1
+ COPYING.LGPLv2.1 \
+ INSTALL.generic \
+ PACKAGERS
ACLOCAL_AMFLAGS = -I m4
+
+# List of man pages to conver to PDF and plain text in the dist-hook target.
+manfiles = \
+ src/xz/xz.1 \
+ src/xzdec/xzdec.1 \
+ src/scripts/xzdiff.1 \
+ src/scripts/xzgrep.1 \
+ src/scripts/xzless.1 \
+ src/scripts/xzmore.1
+
all: config.h
$(MAKE) $(AM_MAKEFLAGS) all-recursive
@@ -234,15 +336,15 @@ $(srcdir)/Makefile.in: $(srcdir)/Makefile.am $(am__configure_deps)
@for dep in $?; do \
case '$(am__configure_deps)' in \
*$$dep*) \
- echo ' cd $(srcdir) && $(AUTOMAKE) --foreign '; \
- cd $(srcdir) && $(AUTOMAKE) --foreign \
+ echo ' cd $(srcdir) && $(AUTOMAKE) --foreign'; \
+ $(am__cd) $(srcdir) && $(AUTOMAKE) --foreign \
&& exit 0; \
exit 1;; \
esac; \
done; \
- echo ' cd $(top_srcdir) && $(AUTOMAKE) --foreign Makefile'; \
- cd $(top_srcdir) && \
- $(AUTOMAKE) --foreign Makefile
+ echo ' cd $(top_srcdir) && $(AUTOMAKE) --foreign Makefile'; \
+ $(am__cd) $(top_srcdir) && \
+ $(AUTOMAKE) --foreign Makefile
.PRECIOUS: Makefile
Makefile: $(srcdir)/Makefile.in $(top_builddir)/config.status
@case '$?' in \
@@ -258,9 +360,10 @@ $(top_builddir)/config.status: $(top_srcdir)/configure $(CONFIG_STATUS_DEPENDENC
$(SHELL) ./config.status --recheck
$(top_srcdir)/configure: $(am__configure_deps)
- cd $(srcdir) && $(AUTOCONF)
+ $(am__cd) $(srcdir) && $(AUTOCONF)
$(ACLOCAL_M4): $(am__aclocal_m4_deps)
- cd $(srcdir) && $(ACLOCAL) $(ACLOCAL_AMFLAGS)
+ $(am__cd) $(srcdir) && $(ACLOCAL) $(ACLOCAL_AMFLAGS)
+$(am__aclocal_m4_deps):
config.h: stamp-h1
@if test ! -f $@; then \
@@ -272,7 +375,7 @@ stamp-h1: $(srcdir)/config.h.in $(top_builddir)/config.status
@rm -f stamp-h1
cd $(top_builddir) && $(SHELL) ./config.status config.h
$(srcdir)/config.h.in: $(am__configure_deps)
- cd $(top_srcdir) && $(AUTOHEADER)
+ ($(am__cd) $(top_srcdir) && $(AUTOHEADER))
rm -f stamp-h1
touch $@
@@ -289,6 +392,26 @@ clean-libtool:
distclean-libtool:
-rm -f libtool config.lt
+install-dist_docDATA: $(dist_doc_DATA)
+ @$(NORMAL_INSTALL)
+ test -z "$(docdir)" || $(MKDIR_P) "$(DESTDIR)$(docdir)"
+ @list='$(dist_doc_DATA)'; test -n "$(docdir)" || list=; \
+ for p in $$list; do \
+ if test -f "$$p"; then d=; else d="$(srcdir)/"; fi; \
+ echo "$$d$$p"; \
+ done | $(am__base_list) | \
+ while read files; do \
+ echo " $(INSTALL_DATA) $$files '$(DESTDIR)$(docdir)'"; \
+ $(INSTALL_DATA) $$files "$(DESTDIR)$(docdir)" || exit $$?; \
+ done
+
+uninstall-dist_docDATA:
+ @$(NORMAL_UNINSTALL)
+ @list='$(dist_doc_DATA)'; test -n "$(docdir)" || list=; \
+ files=`for p in $$list; do echo $$p; done | sed -e 's|^.*/||'`; \
+ test -n "$$files" || exit 0; \
+ echo " ( cd '$(DESTDIR)$(docdir)' && rm -f" $$files ")"; \
+ cd "$(DESTDIR)$(docdir)" && rm -f $$files
# This directory's subdirectories are mostly independent; you can cd
# into them and run `make' without going through this Makefile.
@@ -314,7 +437,7 @@ $(RECURSIVE_TARGETS):
else \
local_target="$$target"; \
fi; \
- (cd $$subdir && $(MAKE) $(AM_MAKEFLAGS) $$local_target) \
+ ($(am__cd) $$subdir && $(MAKE) $(AM_MAKEFLAGS) $$local_target) \
|| eval $$failcom; \
done; \
if test "$$dot_seen" = "no"; then \
@@ -348,16 +471,16 @@ $(RECURSIVE_CLEAN_TARGETS):
else \
local_target="$$target"; \
fi; \
- (cd $$subdir && $(MAKE) $(AM_MAKEFLAGS) $$local_target) \
+ ($(am__cd) $$subdir && $(MAKE) $(AM_MAKEFLAGS) $$local_target) \
|| eval $$failcom; \
done && test -z "$$fail"
tags-recursive:
list='$(SUBDIRS)'; for subdir in $$list; do \
- test "$$subdir" = . || (cd $$subdir && $(MAKE) $(AM_MAKEFLAGS) tags); \
+ test "$$subdir" = . || ($(am__cd) $$subdir && $(MAKE) $(AM_MAKEFLAGS) tags); \
done
ctags-recursive:
list='$(SUBDIRS)'; for subdir in $$list; do \
- test "$$subdir" = . || (cd $$subdir && $(MAKE) $(AM_MAKEFLAGS) ctags); \
+ test "$$subdir" = . || ($(am__cd) $$subdir && $(MAKE) $(AM_MAKEFLAGS) ctags); \
done
ID: $(HEADERS) $(SOURCES) $(LISP) $(TAGS_FILES)
@@ -372,7 +495,7 @@ tags: TAGS
TAGS: tags-recursive $(HEADERS) $(SOURCES) config.h.in $(TAGS_DEPENDENCIES) \
$(TAGS_FILES) $(LISP)
- tags=; \
+ set x; \
here=`pwd`; \
if ($(ETAGS) --etags-include --version) >/dev/null 2>&1; then \
include_option=--etags-include; \
@@ -384,7 +507,7 @@ TAGS: tags-recursive $(HEADERS) $(SOURCES) config.h.in $(TAGS_DEPENDENCIES) \
list='$(SUBDIRS)'; for subdir in $$list; do \
if test "$$subdir" = .; then :; else \
test ! -f $$subdir/TAGS || \
- tags="$$tags $$include_option=$$here/$$subdir/TAGS"; \
+ set "$$@" "$$include_option=$$here/$$subdir/TAGS"; \
fi; \
done; \
list='$(SOURCES) $(HEADERS) config.h.in $(LISP) $(TAGS_FILES)'; \
@@ -393,36 +516,41 @@ TAGS: tags-recursive $(HEADERS) $(SOURCES) config.h.in $(TAGS_DEPENDENCIES) \
done | \
$(AWK) '{ files[$$0] = 1; nonempty = 1; } \
END { if (nonempty) { for (i in files) print i; }; }'`; \
- if test -z "$(ETAGS_ARGS)$$tags$$unique"; then :; else \
+ shift; \
+ if test -z "$(ETAGS_ARGS)$$*$$unique"; then :; else \
test -n "$$unique" || unique=$$empty_fix; \
- $(ETAGS) $(ETAGSFLAGS) $(AM_ETAGSFLAGS) $(ETAGS_ARGS) \
- $$tags $$unique; \
+ if test $$# -gt 0; then \
+ $(ETAGS) $(ETAGSFLAGS) $(AM_ETAGSFLAGS) $(ETAGS_ARGS) \
+ "$$@" $$unique; \
+ else \
+ $(ETAGS) $(ETAGSFLAGS) $(AM_ETAGSFLAGS) $(ETAGS_ARGS) \
+ $$unique; \
+ fi; \
fi
ctags: CTAGS
CTAGS: ctags-recursive $(HEADERS) $(SOURCES) config.h.in $(TAGS_DEPENDENCIES) \
$(TAGS_FILES) $(LISP)
- tags=; \
list='$(SOURCES) $(HEADERS) config.h.in $(LISP) $(TAGS_FILES)'; \
unique=`for i in $$list; do \
if test -f "$$i"; then echo $$i; else echo $(srcdir)/$$i; fi; \
done | \
$(AWK) '{ files[$$0] = 1; nonempty = 1; } \
END { if (nonempty) { for (i in files) print i; }; }'`; \
- test -z "$(CTAGS_ARGS)$$tags$$unique" \
+ test -z "$(CTAGS_ARGS)$$unique" \
|| $(CTAGS) $(CTAGSFLAGS) $(AM_CTAGSFLAGS) $(CTAGS_ARGS) \
- $$tags $$unique
+ $$unique
GTAGS:
here=`$(am__cd) $(top_builddir) && pwd` \
- && cd $(top_srcdir) \
- && gtags -i $(GTAGS_ARGS) $$here
+ && $(am__cd) $(top_srcdir) \
+ && gtags -i $(GTAGS_ARGS) "$$here"
distclean-tags:
-rm -f TAGS ID GTAGS GRTAGS GSYMS GPATH tags
distdir: $(DISTFILES)
$(am__remove_distdir)
- test -d $(distdir) || mkdir $(distdir)
+ test -d "$(distdir)" || mkdir "$(distdir)"
@srcdirstrip=`echo "$(srcdir)" | sed 's/[].[^$$\\*]/\\\\&/g'`; \
topsrcdirstrip=`echo "$(top_srcdir)" | sed 's/[].[^$$\\*]/\\\\&/g'`; \
list='$(DISTFILES)'; \
@@ -438,39 +566,58 @@ distdir: $(DISTFILES)
if test -f $$file || test -d $$file; then d=.; else d=$(srcdir); fi; \
if test -d $$d/$$file; then \
dir=`echo "/$$file" | sed -e 's,/[^/]*$$,,'`; \
+ if test -d "$(distdir)/$$file"; then \
+ find "$(distdir)/$$file" -type d ! -perm -700 -exec chmod u+rwx {} \;; \
+ fi; \
if test -d $(srcdir)/$$file && test $$d != $(srcdir); then \
- cp -pR $(srcdir)/$$file $(distdir)$$dir || exit 1; \
+ cp -fpR $(srcdir)/$$file "$(distdir)$$dir" || exit 1; \
+ find "$(distdir)/$$file" -type d ! -perm -700 -exec chmod u+rwx {} \;; \
fi; \
- cp -pR $$d/$$file $(distdir)$$dir || exit 1; \
+ cp -fpR $$d/$$file "$(distdir)$$dir" || exit 1; \
else \
- test -f $(distdir)/$$file \
- || cp -p $$d/$$file $(distdir)/$$file \
+ test -f "$(distdir)/$$file" \
+ || cp -p $$d/$$file "$(distdir)/$$file" \
|| exit 1; \
fi; \
done
- list='$(DIST_SUBDIRS)'; for subdir in $$list; do \
+ @list='$(DIST_SUBDIRS)'; for subdir in $$list; do \
if test "$$subdir" = .; then :; else \
test -d "$(distdir)/$$subdir" \
|| $(MKDIR_P) "$(distdir)/$$subdir" \
|| exit 1; \
- distdir=`$(am__cd) $(distdir) && pwd`; \
- top_distdir=`$(am__cd) $(top_distdir) && pwd`; \
- (cd $$subdir && \
+ fi; \
+ done
+ @list='$(DIST_SUBDIRS)'; for subdir in $$list; do \
+ if test "$$subdir" = .; then :; else \
+ dir1=$$subdir; dir2="$(distdir)/$$subdir"; \
+ $(am__relativize); \
+ new_distdir=$$reldir; \
+ dir1=$$subdir; dir2="$(top_distdir)"; \
+ $(am__relativize); \
+ new_top_distdir=$$reldir; \
+ echo " (cd $$subdir && $(MAKE) $(AM_MAKEFLAGS) top_distdir="$$new_top_distdir" distdir="$$new_distdir" \\"; \
+ echo " am__remove_distdir=: am__skip_length_check=: am__skip_mode_fix=: distdir)"; \
+ ($(am__cd) $$subdir && \
$(MAKE) $(AM_MAKEFLAGS) \
- top_distdir="$$top_distdir" \
- distdir="$$distdir/$$subdir" \
+ top_distdir="$$new_top_distdir" \
+ distdir="$$new_distdir" \
am__remove_distdir=: \
am__skip_length_check=: \
+ am__skip_mode_fix=: \
distdir) \
|| exit 1; \
fi; \
done
- -find $(distdir) -type d ! -perm -777 -exec chmod a+rwx {} \; -o \
+ $(MAKE) $(AM_MAKEFLAGS) \
+ top_distdir="$(top_distdir)" distdir="$(distdir)" \
+ dist-hook
+ -test -n "$(am__skip_mode_fix)" \
+ || find "$(distdir)" -type d ! -perm -777 -exec chmod a+rwx {} \; -o \
! -type d ! -perm -444 -links 1 -exec chmod a+r {} \; -o \
! -type d ! -perm -400 -exec chmod a+r {} \; -o \
! -type d ! -perm -444 -exec $(install_sh) -c -m a+r {} {} \; \
- || chmod -R a+r $(distdir)
- @if test -z "$(am__skip_length_check)" && find $(distdir) -type f -print | \
+ || chmod -R a+r "$(distdir)"
+ @if test -z "$(am__skip_length_check)" && find "$(distdir)" -type f -print | \
grep '^...................................................................................................' 1>&2; then \
echo 'error: the above filenames are too long' 1>&2; \
exit 1; \
@@ -487,6 +634,10 @@ dist-lzma: distdir
tardir=$(distdir) && $(am__tar) | lzma -9 -c >$(distdir).tar.lzma
$(am__remove_distdir)
+dist-xz: distdir
+ tardir=$(distdir) && $(am__tar) | xz -c >$(distdir).tar.xz
+ $(am__remove_distdir)
+
dist-tarZ: distdir
tardir=$(distdir) && $(am__tar) | compress -c >$(distdir).tar.Z
$(am__remove_distdir)
@@ -515,6 +666,8 @@ distcheck: dist
bunzip2 -c $(distdir).tar.bz2 | $(am__untar) ;;\
*.tar.lzma*) \
unlzma -c $(distdir).tar.lzma | $(am__untar) ;;\
+ *.tar.xz*) \
+ xz -dc $(distdir).tar.xz | $(am__untar) ;;\
*.tar.Z*) \
uncompress -c $(distdir).tar.Z | $(am__untar) ;;\
*.shar.gz*) \
@@ -526,9 +679,11 @@ distcheck: dist
mkdir $(distdir)/_build
mkdir $(distdir)/_inst
chmod a-w $(distdir)
+ test -d $(distdir)/_build || exit 0; \
dc_install_base=`$(am__cd) $(distdir)/_inst && pwd | sed -e 's,^[^:\\/]:[\\/],/,'` \
&& dc_destdir="$${TMPDIR-/tmp}/am-dc-$$$$/" \
- && cd $(distdir)/_build \
+ && am__cwd=`pwd` \
+ && $(am__cd) $(distdir)/_build \
&& ../configure --srcdir=.. --prefix="$$dc_install_base" \
$(DISTCHECK_CONFIGURE_FLAGS) \
&& $(MAKE) $(AM_MAKEFLAGS) \
@@ -550,13 +705,15 @@ distcheck: dist
&& rm -rf "$$dc_destdir" \
&& $(MAKE) $(AM_MAKEFLAGS) dist \
&& rm -rf $(DIST_ARCHIVES) \
- && $(MAKE) $(AM_MAKEFLAGS) distcleancheck
+ && $(MAKE) $(AM_MAKEFLAGS) distcleancheck \
+ && cd "$$am__cwd" \
+ || exit 1
$(am__remove_distdir)
@(echo "$(distdir) archives ready for distribution: "; \
list='$(DIST_ARCHIVES)'; for i in $$list; do echo $$i; done) | \
sed -e 1h -e 1s/./=/g -e 1p -e 1x -e '$$p' -e '$$x'
distuninstallcheck:
- @cd $(distuninstallcheck_dir) \
+ @$(am__cd) '$(distuninstallcheck_dir)' \
&& test `$(distuninstallcheck_listfiles) | wc -l` -le 1 \
|| { echo "ERROR: files left after uninstall:" ; \
if test -n "$(DESTDIR)"; then \
@@ -575,9 +732,12 @@ distcleancheck: distclean
exit 1; } >&2
check-am: all-am
check: check-recursive
-all-am: Makefile config.h
+all-am: Makefile $(DATA) config.h
installdirs: installdirs-recursive
installdirs-am:
+ for dir in "$(DESTDIR)$(docdir)"; do \
+ test -z "$$dir" || $(MKDIR_P) "$$dir"; \
+ done
install: install-recursive
install-exec: install-exec-recursive
install-data: install-data-recursive
@@ -598,6 +758,7 @@ clean-generic:
distclean-generic:
-test -z "$(CONFIG_CLEAN_FILES)" || rm -f $(CONFIG_CLEAN_FILES)
+ -test . = "$(srcdir)" || test -z "$(CONFIG_CLEAN_VPATH_FILES)" || rm -f $(CONFIG_CLEAN_VPATH_FILES)
maintainer-clean-generic:
@echo "This command is intended for maintainers to use"
@@ -618,26 +779,38 @@ dvi-am:
html: html-recursive
+html-am:
+
info: info-recursive
info-am:
-install-data-am:
+install-data-am: install-dist_docDATA
install-dvi: install-dvi-recursive
+install-dvi-am:
+
install-exec-am:
install-html: install-html-recursive
+install-html-am:
+
install-info: install-info-recursive
+install-info-am:
+
install-man:
install-pdf: install-pdf-recursive
+install-pdf-am:
+
install-ps: install-ps-recursive
+install-ps-am:
+
installcheck-am:
maintainer-clean: maintainer-clean-recursive
@@ -658,32 +831,57 @@ ps: ps-recursive
ps-am:
-uninstall-am:
+uninstall-am: uninstall-dist_docDATA
-.MAKE: $(RECURSIVE_CLEAN_TARGETS) $(RECURSIVE_TARGETS) install-am \
- install-strip
+.MAKE: $(RECURSIVE_CLEAN_TARGETS) $(RECURSIVE_TARGETS) all \
+ ctags-recursive install-am install-strip tags-recursive
.PHONY: $(RECURSIVE_CLEAN_TARGETS) $(RECURSIVE_TARGETS) CTAGS GTAGS \
all all-am am--refresh check check-am clean clean-generic \
clean-libtool ctags ctags-recursive dist dist-all dist-bzip2 \
- dist-gzip dist-lzma dist-shar dist-tarZ dist-zip distcheck \
- distclean distclean-generic distclean-hdr distclean-libtool \
- distclean-tags distcleancheck distdir distuninstallcheck dvi \
- dvi-am html html-am info info-am install install-am \
- install-data install-data-am install-dvi install-dvi-am \
- install-exec install-exec-am install-html install-html-am \
- install-info install-info-am install-man install-pdf \
- install-pdf-am install-ps install-ps-am install-strip \
- installcheck installcheck-am installdirs installdirs-am \
- maintainer-clean maintainer-clean-generic mostlyclean \
- mostlyclean-generic mostlyclean-libtool pdf pdf-am ps ps-am \
- tags tags-recursive uninstall uninstall-am
-
+ dist-gzip dist-hook dist-lzma dist-shar dist-tarZ dist-xz \
+ dist-zip distcheck distclean distclean-generic distclean-hdr \
+ distclean-libtool distclean-tags distcleancheck distdir \
+ distuninstallcheck dvi dvi-am html html-am info info-am \
+ install install-am install-data install-data-am \
+ install-dist_docDATA install-dvi install-dvi-am install-exec \
+ install-exec-am install-html install-html-am install-info \
+ install-info-am install-man install-pdf install-pdf-am \
+ install-ps install-ps-am install-strip installcheck \
+ installcheck-am installdirs installdirs-am maintainer-clean \
+ maintainer-clean-generic mostlyclean mostlyclean-generic \
+ mostlyclean-libtool pdf pdf-am ps ps-am tags tags-recursive \
+ uninstall uninstall-am uninstall-dist_docDATA
+
+
+# Create ChangeLog from output of "git log --date=iso --stat".
+# Convert the man pages to PDF and plain text (ASCII only) formats.
+dist-hook:
+ if test -d "$(srcdir)/.git" && type git > /dev/null 2>&1; then \
+ ( cd "$(srcdir)" && git log --date=iso --stat ) \
+ > "$(distdir)/ChangeLog"; \
+ fi
+ if type groff > /dev/null 2>&1 && type ps2pdf > /dev/null 2>&1; then \
+ dest="$(distdir)/doc/man" && \
+ $(MKDIR_P) "$$dest/pdf-a4" "$$dest/pdf-letter" "$$dest/txt" && \
+ for FILE in $(manfiles); do \
+ BASE=`basename $$FILE .1` && \
+ groff -man -t -Tps -P-pa4 < "$(srcdir)/$$FILE" \
+ | ps2pdf - - \
+ > "$$dest/pdf-a4/$$BASE-a4.pdf" && \
+ groff -man -t -Tps -P-pletter < "$(srcdir)/$$FILE" \
+ | ps2pdf - - \
+ > "$$dest/pdf-letter/$$BASE-letter.pdf" && \
+ groff -man -t -Tascii < "$(srcdir)/$$FILE" \
+ | col -bx > "$$dest/txt/$$BASE.txt"; \
+ done; \
+ fi
# This works with GNU tar and gives cleaner package than normal 'make dist'.
mydist:
TAR_OPTIONS='--owner=0 --group=0 --numeric-owner --mode=u+rw,go+r-w' \
$(MAKE) dist-gzip
+
# Tell versions [3.59,3.63) of GNU make to not export all variables.
# Otherwise a system limit (for SysV at least) may be exceeded.
.NOEXPORT:
diff --git a/Build/source/utils/xz-4.999.8beta/NEWS b/Build/source/utils/xz-4.999.9beta/NEWS
index e69de29bb2d..e69de29bb2d 100644
--- a/Build/source/utils/xz-4.999.8beta/NEWS
+++ b/Build/source/utils/xz-4.999.9beta/NEWS
diff --git a/Build/source/utils/xz-4.999.9beta/PACKAGERS b/Build/source/utils/xz-4.999.9beta/PACKAGERS
new file mode 100644
index 00000000000..c5d375ab270
--- /dev/null
+++ b/Build/source/utils/xz-4.999.9beta/PACKAGERS
@@ -0,0 +1,279 @@
+
+Information to packagers of XZ Utils
+====================================
+
+ 0. Preface
+ 1. Package naming
+ 2. Package description
+ 3. License
+ 4. configure options
+ 4.1. Static vs. dynamic linking of liblzma
+ 4.2. Optimizing xzdec and lzmadec
+ 5. Additional documentation
+ 6. Extra files
+ 7. Installing XZ Utils and LZMA Utils in parallel
+ 8. Example
+
+
+0. Preface
+----------
+
+ This document is meant for people who create and maintain XZ Utils
+ packages for operating system distributions. The focus is on GNU/Linux
+ systems, but most things apply to other systems too.
+
+ While the standard "configure && make DESTDIR=$PKG install" should
+ give a pretty good package, there are some details which packagers
+ may want to tweak.
+
+ Packagers should also read the INSTALL file.
+
+
+1. Package naming
+-----------------
+
+ The preferred name for the XZ Utils package is "xz", because that's
+ the name of the upstream tarball. Naturally you may have good reasons
+ to use some other name; I won't get angry about it. ;-) It's just nice
+ to be able to point people to the correct package name without asking
+ what distro they have.
+
+ If your distro policy is to split things into small pieces, here is
+ one suggestion:
+
+ xz xz, xzdec, scripts (xzdiff, xzgrep, etc.), docs
+ xz-lzma lzma, unlzma, lzcat, lzgrep etc. symlinks and
+ lzmadec binary for compatibility with LZMA Utils
+ liblzma liblzma.so.*
+ liblzma-devel liblzma.so, liblzma.a, API headers
+
+
+2. Package description
+----------------------
+
+ Here is a suggestion which you may use as the package description.
+ If you can use only one-line description, pick only the first line.
+ Naturally, feel free to use some other description if you find it
+ better, and maybe send it to me too.
+
+ Library and command line tools for XZ and LZMA compressed files
+
+ XZ Utils provide a general purpose data compression library
+ and command line tools. The native file format is the .xz
+ format, but also the legacy .lzma format is supported. The .xz
+ format supports multiple compression algorithms, of which LZMA2
+ is currently the primary algorithm. With typical files, XZ Utils
+ create about 30 % smaller files than gzip.
+
+ If you are splitting XZ Utils into multiple packages, here are some
+ suggestions for package descriptions:
+
+ xz:
+
+ Command line tools for XZ and LZMA compressed files
+
+ This package includes the xz compression tool and other command
+ line tools from XZ Utils. xz has command line syntax similar to
+ that of gzip. The native file format is the .xz format, but also
+ the legacy .lzma format is supported. The .xz format supports
+ multiple compression algorithms, of which LZMA2 is currently the
+ primary algorithm. With typical files, XZ Utils create about 30 %
+ smaller files than gzip.
+
+ Note that this package doesn't include the files needed for
+ LZMA Utils 4.32.x compatibility. Install also the xz-lzma
+ package to make XZ Utils emulate LZMA Utils 4.32.x.
+
+ xz-lzma:
+
+ LZMA Utils emulation with XZ Utils
+
+ This package includes executables and symlinks to make
+ XZ Utils emulate lzma, unlzma, lzcat, and other command
+ line tools found from the legacy LZMA Utils 4.32.x package.
+
+ liblzma:
+
+ Library for XZ and LZMA compressed files
+
+ liblzma is a general purpose data compression library with
+ an API similar to that of zlib. liblzma supports multiple
+ algorithms, of which LZMA2 is currently the primary algorithm.
+ The native file format is .xz, but also the legacy .lzma
+ format and raw streams (no headers at all) are supported.
+
+ This package includes the shared library.
+
+ liblzma-devel:
+
+ Library for XZ and LZMA compressed files
+
+ This package includes the API headers, static library, and
+ other development files related to liblzma.
+
+
+3. License
+----------
+
+ If the package manager supports a license field, you probably should
+ put GPLv2+ there (GNU GPL v2 or later). The interesting parts of
+ XZ Utils are in the public domain, but some less important files
+ ending up into the binary package are under GPLv2+. So it is simplest
+ to just say GPLv2+ if you cannot specify "public domain and GPLv2+".
+
+ If you split XZ Utils into multiple packages as described earlier
+ in this file, liblzma and liblzma-dev packages will contain only
+ public domain code (from XZ Utils at least; compiler or linker may
+ add some third-party code, which may be copyrighted).
+
+
+4. configure options
+--------------------
+
+ Unless you are building a package for a distribution that is meant
+ only for embedded systems, don't use the following configure options:
+
+ --enable-debug
+ --enable-encoders (*)
+ --enable-decoders
+ --enable-match-finders
+ --enable-checks
+ --enable-small (*)
+ --disable-threads (*)
+
+ (*) These are OK when building xzdec and lzmadec as explained later.
+
+ You may use --enable-werror but be careful with it since it may break
+ the build due to some useless warning when the build environment
+ changes (like CPU architecture or compiler version).
+
+
+4.1. Static vs. dynamic linking of liblzma
+
+ The default is to link the most important command line tools against
+ static liblzma, and the less important tools against shared liblzma.
+ This can be changed by passing --enable-dynamic to configure, or by
+ not building static libraries at all by passing --disable-static
+ to configure. It is mildly recommended that you use the default, but
+ the configure options make it easy to do otherwise if the distro policy
+ so requires.
+
+ On 32-bit x86, linking against static liblzma can give a minor
+ speed improvement. Static libraries on x86 are usually compiled as
+ position-dependent code (non-PIC) and shared libraries are built as
+ position-independent code (PIC). PIC wastes one register, which can
+ make the code slightly slower compared to a non-PIC version. (Note
+ that this doesn't apply to x86-64.)
+
+ Linking against static liblzma avoids a dependency on liblzma shared
+ library, and makes it slightly easier to copy the command line tools
+ between systems (e.g. quick 'n' dirty emergency recovery of some
+ files). It also allows putting the command line tools to /bin while
+ leaving liblzma to /usr/lib (assuming that your distribution uses
+ such a file system hierarchy), if no other file in /bin would require
+ liblzma.
+
+ If you don't want to distribute static libraries but you still
+ want to link the command line tools against static liblzma, it is
+ probably easiest to build both static and shared liblzma, but after
+ "make DESTDIR=$PKG install" remove liblzma.a and modify liblzma.la
+ to not contain a reference to liblzma.a.
+
+
+4.2. Optimizing xzdec and lzmadec
+
+ xzdec and lzmadec are intended to be relatively small instead of
+ optimizing for the best speed. Thus, it is a good idea to build
+ xzdec and lzmadec separately:
+
+ - Only decoder code is needed, so you can speed up the build
+ slightly by passing --disable-encoders to configure. This
+ shouldn't affect the final size of the executables though,
+ because the linker is able to omit the encoder code anyway.
+
+ - xzdec and lzmadec will never use multithreading capabilities of
+ liblzma. You can avoid dependency on libpthread by passing
+ --disable-threads to configure.
+
+ - There are and will be no translated messages for xzdec and
+ lzmadec, so it is fine to pass also --disable-nls to configure.
+
+ - To select somewhat size-optimized variant of some things in
+ liblzma, pass --enable-small to configure.
+
+ - Tell the compiler to optimize for size instead of speed.
+ E.g. with GCC, put -Os into CFLAGS.
+
+
+5. Additional documentation
+---------------------------
+
+ "make install" copies some additional documentation to $docdir
+ (--docdir in configure). These a copy of the GNU GPL v2, which can
+ be replaced with a symlink if your distro ships with shared copies
+ of the common license texts.
+
+
+6. Extra files
+--------------
+
+ The "extra" directory contains some small extra tools or other files.
+ The exact set of extra files can vary between XZ Utils releases. The
+ extra files have only limited use or they are too dangerous to be
+ put directly to $bindir (7z2lzma.sh is a good example, since it can
+ silently create corrupt output if certain conditions are not met).
+
+ If you feel like it, you may copy the extra directory under the doc
+ directory (e.g. /usr/share/doc/xz/extra). Maybe some people will find
+ them useful. However, most people needing these tools probably are
+ able to find them from the source package too.
+
+ The "debug" directory contains some tools that are useful only when
+ hacking on XZ Utils. Don't package these tools.
+
+
+7. Installing XZ Utils and LZMA Utils in parallel
+-------------------------------------------------
+
+ XZ Utils and LZMA Utils 4.32.x can be installed in parallel by
+ omitting the compatibility symlinks (lzma, unlzma, lzcat, lzgrep etc.)
+ from the XZ Utils package. It's probably a good idea to still package
+ the symlinks into a separate package so that users may choose if they
+ want to use XZ Utils or LZMA Utils for handling .lzma files.
+
+
+8. Example
+----------
+
+ Here is an example for i686 GNU/Linux that
+ - links xz against static liblzma;
+ - includes only shared liblzma in the final package;
+ - links xzdec and lzmadec against static liblzma while
+ avoiding libpthread dependency.
+
+ PKG=/tmp/xz-pkg
+ tar xf xz-x.y.z.tar.gz
+ cd xz-x.y.z
+ ./configure \
+ --prefix=/usr \
+ --sysconfdir=/etc \
+ CFLAGS='-march=i686 -O2'
+ make
+ make DESTDIR=$PKG install-strip
+ rm -f $PKG/usr/lib/lib*.a
+ sed -i "s/^old_library=.*$/old_library=''/" $PKG/usr/lib/lib*.la
+ make clean
+ ./configure \
+ --prefix=/usr \
+ --sysconfdir=/etc \
+ --disable-shared \
+ --disable-nls \
+ --disable-encoders \
+ --enable-small \
+ --disable-threads \
+ CFLAGS='-march=i686 -Os'
+ make -C src/liblzma
+ make -C src/xzdec
+ make -C src/xzdec DESTDIR=$PKG install-strip
+ cp -a extra $PKG/usr/share/doc/xz
+
diff --git a/Build/source/utils/xz-4.999.9beta/README b/Build/source/utils/xz-4.999.9beta/README
new file mode 100644
index 00000000000..3544938e8e4
--- /dev/null
+++ b/Build/source/utils/xz-4.999.9beta/README
@@ -0,0 +1,217 @@
+
+XZ Utils
+========
+
+ 0. Overview
+ 1. Documentation
+ 1.1. Overall documentation
+ 1.2. Documentation for command line tools
+ 1.3. Documentation for liblzma
+ 2. Version numbering
+ 3. Reporting bugs
+ 4. Other implementations of the .xz format
+ 5. Contact information
+
+
+0. Overview
+-----------
+
+ XZ Utils provide a general purporse data compression library and
+ command line tools. The native file format is the .xz format, but
+ also the legacy .lzma format is supported. The .xz format supports
+ multiple compression algorithms, which are called "filters" in
+ context of XZ Utils. The primary filter is currently LZMA2. With
+ typical files, XZ Utils create about 30 % smaller files than gzip.
+
+ To ease adapting support for the .xz format into existing applications
+ and scripts, the API of liblzma is somewhat similar to the API of the
+ popular zlib library. For the same reason, the command line tool xz
+ has similar command line syntax than that of gzip.
+
+ When aiming for the highest compression ratio, LZMA2 encoder uses
+ a lot of CPU time and may use, depending on the settings, even
+ hundreds of megabytes of RAM. However, in fast modes, LZMA2 encoder
+ competes with bzip2 in compression speed, RAM usage, and compression
+ ratio.
+
+ LZMA2 is reasonably fast to decompress. It is a little slower than
+ gzip, but a lot faster than bzip2. Being fast to decompress means
+ that the .xz format is especially nice when the same file will be
+ decompressed very many times (usually on different computers), which
+ is the case e.g. when distributing software packages. In such
+ situations, it's not too bad if the compression takes some time,
+ since that needs to be done only once to benefit many people.
+
+ With some file types, combining (or "chaining") LZMA2 with an
+ additional filter can improve compression ratio. A filter chain may
+ contain up to four filters, although usually only one two is used.
+ For example, putting a BCJ (Branch/Call/Jump) filter before LZMA2
+ in the filter chain can improve compression ratio of executable files.
+
+ Since the .xz format allows adding new filter IDs, it is possible that
+ some day there will be a filter that is, for example, much faster to
+ compress than LZMA2 (but probably with worse compression ratio).
+ Similarly, it is possible that some day there is a filter that will
+ compress better than LZMA2.
+
+ XZ Utils doesn't support multithreaded compression or decompression
+ yet. It has been planned though and taken into account when designing
+ the .xz file format.
+
+
+1. Documentation
+----------------
+
+1.1. Overall documentation
+
+ README This file
+
+ INSTALL.generic Generic install instructions for those not familiar
+ with packages using GNU Autotools
+ INSTALL Installation instructions specific to XZ Utils
+ PACKAGERS Information to packagers of XZ Utils
+
+ COPYING XZ Utils copyright and license information
+ COPYING.GPLv2 GNU General Public License version 2
+ COPYING.GPLv3 GNU General Public License version 3
+ COPYING.LGPLv2.1 GNU Lesser General Public License version 2.1
+
+ AUTHORS The main authors of XZ Utils
+ THANKS Incomplete list of people who have helped making
+ this software
+ NEWS User-visible changes between XZ Utils releases
+ ChangeLog Detailed list of changes (commit log)
+
+ Note that only some of the above files are included in binary
+ packages.
+
+
+1.2. Documentation for command line tools
+
+ The command line tools are documented as man pages. In source code
+ releases (and possibly also in some binary packages), the man pages
+ are also provided in plain text (ASCII only) and PDF formats in the
+ directory "doc/man" to make the man pages more accessible to those
+ whose operating system doesn't provide an easy way to view man pages.
+
+
+1.3. Documentation for liblzma
+
+ The liblzma API headers include short docs about each function
+ and data type as Doxygen tags. These docs should be quite OK as
+ a quick reference.
+
+ I have planned to write a bunch of very well documented example
+ programs, which (due to comments) should work as a tutorial to
+ various features of liblzma. No such example programs have been
+ written yet.
+
+ For now, if you have never used liblzma, libbzip2, or zlib, I
+ recommend learning *basics* of zlib API. Once you know that, it
+ should be easier to learn liblzma.
+
+ http://zlib.net/manual.html
+ http://zlib.net/zlib_how.html
+
+
+2. Version numbering
+--------------------
+
+ The version number format of XZ Utils is X.Y.ZS:
+
+ - X is the major version. When this is incremented, the library
+ API and ABI break.
+
+ - Y is the minor version. It is incremented when new features are
+ added without breaking existing API or ABI. Even Y indicates
+ stable release and odd Y indicates unstable (alpha or beta
+ version).
+
+ - Z is the revision. This has different meaning for stable and
+ unstable releases:
+ * Stable: Z is incremented when bugs get fixed without adding
+ any new features.
+ * Unstable: Z is just a counter. API or ABI of features added
+ in earlier unstable releases having the same X.Y may break.
+
+ - S indicates stability of the release. It is missing from the
+ stable releases where Y is an even number. When Y is odd, S
+ is either "alpha" or "beta" to make it very clear that such
+ versions are not stable releases. The same X.Y.Z combination is
+ not used for more than one stability level i.e. after X.Y.Zalpha,
+ the next version can be X.Y.(Z+1)beta but not X.Y.Zbeta.
+
+
+3. Reporting bugs
+-----------------
+
+ Naturally it is easiest for me if you already know what causes the
+ unexpected behavior. Even better if you have a patch to propose.
+ However, quite often the reason for unexpected behavior is unknown,
+ so here are a few things to do before sending a bug report:
+
+ 1. Try to create a small example how to reprocude the issue.
+
+ 2. Compile XZ Utils with debugging code using configure switches
+ --enable-debug and, if possible, --disable-shared. If you are
+ using GCC, use CFLAGS='-O0 -ggdb3'. Don't strip the resulting
+ binaries.
+
+ 3. Turn on core dumps. The exact command depends on your shell;
+ for example in GNU bash it is done with "ulimit -c unlimited",
+ and in tcsh with "limit coredumpsize unlimited".
+
+ 4. Try to reproduce the suspected bug. If you get "assertion failed"
+ message, be sure to include the complete message in your bug
+ report. If the application leaves a coredump, get a backtrace
+ using gdb:
+ $ gdb /path/to/app-binary # Load the app to the debugger.
+ (gdb) core core # Open the coredump.
+ (gdb) bt # Print the backtrace. Copy & paste to bug report.
+ (gdb) quit # Quit gdb.
+
+ Report your bug via email or IRC (see Contact information below).
+ Don't send core dump files or any executables. If you have a small
+ example file(s) (total size less than 256 KiB), please include
+ it/them as an attachment. If you have bigger test files, put them
+ online somewhere and include an URL to the file(s) in the bug report.
+
+ Always include the exact version number of XZ Utils in the bug report.
+ If you are using a snapshot from the git repository, use "git describe"
+ to get the exact snapshot version. If you are using XZ Utils shipped
+ in an operating system distribution, mention the distribution name,
+ distribution version, and exact xz package version; if you cannot
+ repeat the bug with the code compiled from unpatched source code,
+ you probably need to report a bug to your distribution's bug tracking
+ system.
+
+
+4. Other implementations of the .xz format
+------------------------------------------
+
+ 7-Zip and the p7zip port of 7-Zip support the .xz format starting
+ from the version 9.00alpha.
+
+ http://7-zip.org/
+ http://p7zip.sourceforge.net/
+
+ XZ Embedded is a limited implementation written for use in the Linux
+ kernel, but it is also suitable for other embedded use.
+
+ http://tukaani.org/xz/embedded.html
+
+
+5. Contact information
+----------------------
+
+ If you have questions, bug reports, patches etc. related to XZ Utils,
+ contact Lasse Collin <lasse.collin@tukaani.org> (in Finnish or English).
+ tukaani.org uses greylisting to reduce spam, thus when you send your
+ first email, it may get delayed by a few hours. In addition to that,
+ I'm sometimes slow at replying. If you haven't got a reply within two
+ weeks, assume that your email has got lost and resend it or use IRC.
+
+ You can find me also from #tukaani on Freenode; my nick is Larhzu.
+ The channel tends to be pretty quiet, so just ask your question and
+ someone may wake up.
+
diff --git a/Build/source/utils/xz-4.999.9beta/THANKS b/Build/source/utils/xz-4.999.9beta/THANKS
new file mode 100644
index 00000000000..426a2ed089f
--- /dev/null
+++ b/Build/source/utils/xz-4.999.9beta/THANKS
@@ -0,0 +1,47 @@
+
+Thanks
+======
+
+Some people have helped more, some less, but nevertheless everyone's help
+has been important. :-) In alphabetical order:
+ - Mark Adler
+ - H. Peter Anvin
+ - Nelson H. F. Beebe
+ - Anders F. Björklund
+ - Emmanuel Blot
+ - David Burklund
+ - Andrew Dudman
+ - İsmail Dönmez
+ - Mike Frysinger
+ - Per Øyvind Karlsen
+ - Ville Koskinen
+ - Stephan Kulow
+ - Peter Lawler
+ - Hin-Tak Leung
+ - Andraž 'ruskie' Levstik
+ - Jim Meyering
+ - Hongbo Ni
+ - Jonathan Nieder
+ - Igor Pavlov
+ - Mikko Pouru
+ - Bernhard Reutner-Fischer
+ - Christian von Roques
+ - Alexandre Sauvé
+ - Andreas Schwab
+ - Dan Shechter
+ - Jonathan Stott
+ - Paul Townsend
+ - Mohammed Adnène Trojette
+ - Patrick J. Volkerding
+ - Bert Wesarg
+ - Ralf Wildenhues
+ - Charles Wilson
+ - Lars Wirzenius
+ - Pilorz Wojciech
+ - Andreas Zieringer
+
+Also thanks to all the people who have participated in the Tukaani project.
+
+I have probably forgot to add some names to the above list. Sorry about
+that and thanks for your help.
+
diff --git a/Build/source/utils/xz-4.999.9beta/TODO b/Build/source/utils/xz-4.999.9beta/TODO
new file mode 100644
index 00000000000..6912943b5d9
--- /dev/null
+++ b/Build/source/utils/xz-4.999.9beta/TODO
@@ -0,0 +1,56 @@
+
+XZ Utils To-Do List
+===================
+
+Known bugs
+----------
+
+ The test suite is too incomplete.
+
+ If the memor usage limit is less than about 13 MiB, xz is unable to
+ automatically scale down the compression settings enough even though
+ it would be possible by switching from BT2/BT3/BT4 match finder to
+ HC3/HC4.
+
+ The code to detect number of CPU cores doesn't count hyperthreading
+ as multiple cores. In context of xz, it probably should.
+ Hyperthreading is good at least with p7zip.
+
+ XZ Utils compress some files significantly worse than LZMA Utils.
+ This is due to faster compression presets used by XZ Utils, and
+ can be worked around by using "xz --extreme". However, the presets
+ need some tweaking and maybe this issue can be minimized without
+ making the typical case too much slower.
+
+
+Missing features
+----------------
+
+ "xz --list"
+
+ xz could create sparse files when decompressing. (Some prototyping
+ has been done.)
+
+ xz doesn't support copying extended attributes, access control
+ lists etc. from source to target file.
+
+ Multithreaded compression
+
+ Multithreaded decompression
+
+ Buffer-to-buffer coding could use less RAM (especially when
+ decompressing LZMA1 or LZMA2).
+
+ I/O library is not implemented. It will possibly be named libzzf.
+
+
+Documentation
+-------------
+
+ Some tutorial is needed for liblzma. I have planned to write some
+ extremely well commented example programs, which would work as
+ a tutorial. I suppose the Doxygen tags are quite OK as a quick
+ reference once one is familiar with the liblzma API.
+
+ Document the LZMA1 and LZMA2 algorithms.
+
diff --git a/Build/source/utils/xz-4.999.9beta/aclocal.m4 b/Build/source/utils/xz-4.999.9beta/aclocal.m4
new file mode 100644
index 00000000000..09162f8a4cf
--- /dev/null
+++ b/Build/source/utils/xz-4.999.9beta/aclocal.m4
@@ -0,0 +1,1027 @@
+# generated automatically by aclocal 1.11 -*- Autoconf -*-
+
+# Copyright (C) 1996, 1997, 1998, 1999, 2000, 2001, 2002, 2003, 2004,
+# 2005, 2006, 2007, 2008, 2009 Free Software Foundation, Inc.
+# This file is free software; the Free Software Foundation
+# gives unlimited permission to copy and/or distribute it,
+# with or without modifications, as long as this notice is preserved.
+
+# This program is distributed in the hope that it will be useful,
+# but WITHOUT ANY WARRANTY, to the extent permitted by law; without
+# even the implied warranty of MERCHANTABILITY or FITNESS FOR A
+# PARTICULAR PURPOSE.
+
+m4_ifndef([AC_AUTOCONF_VERSION],
+ [m4_copy([m4_PACKAGE_VERSION], [AC_AUTOCONF_VERSION])])dnl
+m4_if(m4_defn([AC_AUTOCONF_VERSION]), [2.64],,
+[m4_warning([this file was generated for autoconf 2.64.
+You have another version of autoconf. It may work, but is not guaranteed to.
+If you have problems, you may need to regenerate the build system entirely.
+To do so, use the procedure documented by the package, typically `autoreconf'.])])
+
+# Copyright (C) 2002, 2003, 2005, 2006, 2007, 2008 Free Software Foundation, Inc.
+#
+# This file is free software; the Free Software Foundation
+# gives unlimited permission to copy and/or distribute it,
+# with or without modifications, as long as this notice is preserved.
+
+# AM_AUTOMAKE_VERSION(VERSION)
+# ----------------------------
+# Automake X.Y traces this macro to ensure aclocal.m4 has been
+# generated from the m4 files accompanying Automake X.Y.
+# (This private macro should not be called outside this file.)
+AC_DEFUN([AM_AUTOMAKE_VERSION],
+[am__api_version='1.11'
+dnl Some users find AM_AUTOMAKE_VERSION and mistake it for a way to
+dnl require some minimum version. Point them to the right macro.
+m4_if([$1], [1.11], [],
+ [AC_FATAL([Do not call $0, use AM_INIT_AUTOMAKE([$1]).])])dnl
+])
+
+# _AM_AUTOCONF_VERSION(VERSION)
+# -----------------------------
+# aclocal traces this macro to find the Autoconf version.
+# This is a private macro too. Using m4_define simplifies
+# the logic in aclocal, which can simply ignore this definition.
+m4_define([_AM_AUTOCONF_VERSION], [])
+
+# AM_SET_CURRENT_AUTOMAKE_VERSION
+# -------------------------------
+# Call AM_AUTOMAKE_VERSION and AM_AUTOMAKE_VERSION so they can be traced.
+# This function is AC_REQUIREd by AM_INIT_AUTOMAKE.
+AC_DEFUN([AM_SET_CURRENT_AUTOMAKE_VERSION],
+[AM_AUTOMAKE_VERSION([1.11])dnl
+m4_ifndef([AC_AUTOCONF_VERSION],
+ [m4_copy([m4_PACKAGE_VERSION], [AC_AUTOCONF_VERSION])])dnl
+_AM_AUTOCONF_VERSION(m4_defn([AC_AUTOCONF_VERSION]))])
+
+# Figure out how to run the assembler. -*- Autoconf -*-
+
+# Copyright (C) 2001, 2003, 2004, 2005, 2006 Free Software Foundation, Inc.
+#
+# This file is free software; the Free Software Foundation
+# gives unlimited permission to copy and/or distribute it,
+# with or without modifications, as long as this notice is preserved.
+
+# serial 5
+
+# AM_PROG_AS
+# ----------
+AC_DEFUN([AM_PROG_AS],
+[# By default we simply use the C compiler to build assembly code.
+AC_REQUIRE([AC_PROG_CC])
+test "${CCAS+set}" = set || CCAS=$CC
+test "${CCASFLAGS+set}" = set || CCASFLAGS=$CFLAGS
+AC_ARG_VAR([CCAS], [assembler compiler command (defaults to CC)])
+AC_ARG_VAR([CCASFLAGS], [assembler compiler flags (defaults to CFLAGS)])
+_AM_IF_OPTION([no-dependencies],, [_AM_DEPENDENCIES([CCAS])])dnl
+])
+
+# AM_AUX_DIR_EXPAND -*- Autoconf -*-
+
+# Copyright (C) 2001, 2003, 2005 Free Software Foundation, Inc.
+#
+# This file is free software; the Free Software Foundation
+# gives unlimited permission to copy and/or distribute it,
+# with or without modifications, as long as this notice is preserved.
+
+# For projects using AC_CONFIG_AUX_DIR([foo]), Autoconf sets
+# $ac_aux_dir to `$srcdir/foo'. In other projects, it is set to
+# `$srcdir', `$srcdir/..', or `$srcdir/../..'.
+#
+# Of course, Automake must honor this variable whenever it calls a
+# tool from the auxiliary directory. The problem is that $srcdir (and
+# therefore $ac_aux_dir as well) can be either absolute or relative,
+# depending on how configure is run. This is pretty annoying, since
+# it makes $ac_aux_dir quite unusable in subdirectories: in the top
+# source directory, any form will work fine, but in subdirectories a
+# relative path needs to be adjusted first.
+#
+# $ac_aux_dir/missing
+# fails when called from a subdirectory if $ac_aux_dir is relative
+# $top_srcdir/$ac_aux_dir/missing
+# fails if $ac_aux_dir is absolute,
+# fails when called from a subdirectory in a VPATH build with
+# a relative $ac_aux_dir
+#
+# The reason of the latter failure is that $top_srcdir and $ac_aux_dir
+# are both prefixed by $srcdir. In an in-source build this is usually
+# harmless because $srcdir is `.', but things will broke when you
+# start a VPATH build or use an absolute $srcdir.
+#
+# So we could use something similar to $top_srcdir/$ac_aux_dir/missing,
+# iff we strip the leading $srcdir from $ac_aux_dir. That would be:
+# am_aux_dir='\$(top_srcdir)/'`expr "$ac_aux_dir" : "$srcdir//*\(.*\)"`
+# and then we would define $MISSING as
+# MISSING="\${SHELL} $am_aux_dir/missing"
+# This will work as long as MISSING is not called from configure, because
+# unfortunately $(top_srcdir) has no meaning in configure.
+# However there are other variables, like CC, which are often used in
+# configure, and could therefore not use this "fixed" $ac_aux_dir.
+#
+# Another solution, used here, is to always expand $ac_aux_dir to an
+# absolute PATH. The drawback is that using absolute paths prevent a
+# configured tree to be moved without reconfiguration.
+
+AC_DEFUN([AM_AUX_DIR_EXPAND],
+[dnl Rely on autoconf to set up CDPATH properly.
+AC_PREREQ([2.50])dnl
+# expand $ac_aux_dir to an absolute path
+am_aux_dir=`cd $ac_aux_dir && pwd`
+])
+
+# AM_CONDITIONAL -*- Autoconf -*-
+
+# Copyright (C) 1997, 2000, 2001, 2003, 2004, 2005, 2006, 2008
+# Free Software Foundation, Inc.
+#
+# This file is free software; the Free Software Foundation
+# gives unlimited permission to copy and/or distribute it,
+# with or without modifications, as long as this notice is preserved.
+
+# serial 9
+
+# AM_CONDITIONAL(NAME, SHELL-CONDITION)
+# -------------------------------------
+# Define a conditional.
+AC_DEFUN([AM_CONDITIONAL],
+[AC_PREREQ(2.52)dnl
+ ifelse([$1], [TRUE], [AC_FATAL([$0: invalid condition: $1])],
+ [$1], [FALSE], [AC_FATAL([$0: invalid condition: $1])])dnl
+AC_SUBST([$1_TRUE])dnl
+AC_SUBST([$1_FALSE])dnl
+_AM_SUBST_NOTMAKE([$1_TRUE])dnl
+_AM_SUBST_NOTMAKE([$1_FALSE])dnl
+m4_define([_AM_COND_VALUE_$1], [$2])dnl
+if $2; then
+ $1_TRUE=
+ $1_FALSE='#'
+else
+ $1_TRUE='#'
+ $1_FALSE=
+fi
+AC_CONFIG_COMMANDS_PRE(
+[if test -z "${$1_TRUE}" && test -z "${$1_FALSE}"; then
+ AC_MSG_ERROR([[conditional "$1" was never defined.
+Usually this means the macro was only invoked conditionally.]])
+fi])])
+
+# Copyright (C) 1999, 2000, 2001, 2002, 2003, 2004, 2005, 2006, 2009
+# Free Software Foundation, Inc.
+#
+# This file is free software; the Free Software Foundation
+# gives unlimited permission to copy and/or distribute it,
+# with or without modifications, as long as this notice is preserved.
+
+# serial 10
+
+# There are a few dirty hacks below to avoid letting `AC_PROG_CC' be
+# written in clear, in which case automake, when reading aclocal.m4,
+# will think it sees a *use*, and therefore will trigger all it's
+# C support machinery. Also note that it means that autoscan, seeing
+# CC etc. in the Makefile, will ask for an AC_PROG_CC use...
+
+
+# _AM_DEPENDENCIES(NAME)
+# ----------------------
+# See how the compiler implements dependency checking.
+# NAME is "CC", "CXX", "GCJ", or "OBJC".
+# We try a few techniques and use that to set a single cache variable.
+#
+# We don't AC_REQUIRE the corresponding AC_PROG_CC since the latter was
+# modified to invoke _AM_DEPENDENCIES(CC); we would have a circular
+# dependency, and given that the user is not expected to run this macro,
+# just rely on AC_PROG_CC.
+AC_DEFUN([_AM_DEPENDENCIES],
+[AC_REQUIRE([AM_SET_DEPDIR])dnl
+AC_REQUIRE([AM_OUTPUT_DEPENDENCY_COMMANDS])dnl
+AC_REQUIRE([AM_MAKE_INCLUDE])dnl
+AC_REQUIRE([AM_DEP_TRACK])dnl
+
+ifelse([$1], CC, [depcc="$CC" am_compiler_list=],
+ [$1], CXX, [depcc="$CXX" am_compiler_list=],
+ [$1], OBJC, [depcc="$OBJC" am_compiler_list='gcc3 gcc'],
+ [$1], UPC, [depcc="$UPC" am_compiler_list=],
+ [$1], GCJ, [depcc="$GCJ" am_compiler_list='gcc3 gcc'],
+ [depcc="$$1" am_compiler_list=])
+
+AC_CACHE_CHECK([dependency style of $depcc],
+ [am_cv_$1_dependencies_compiler_type],
+[if test -z "$AMDEP_TRUE" && test -f "$am_depcomp"; then
+ # We make a subdir and do the tests there. Otherwise we can end up
+ # making bogus files that we don't know about and never remove. For
+ # instance it was reported that on HP-UX the gcc test will end up
+ # making a dummy file named `D' -- because `-MD' means `put the output
+ # in D'.
+ mkdir conftest.dir
+ # Copy depcomp to subdir because otherwise we won't find it if we're
+ # using a relative directory.
+ cp "$am_depcomp" conftest.dir
+ cd conftest.dir
+ # We will build objects and dependencies in a subdirectory because
+ # it helps to detect inapplicable dependency modes. For instance
+ # both Tru64's cc and ICC support -MD to output dependencies as a
+ # side effect of compilation, but ICC will put the dependencies in
+ # the current directory while Tru64 will put them in the object
+ # directory.
+ mkdir sub
+
+ am_cv_$1_dependencies_compiler_type=none
+ if test "$am_compiler_list" = ""; then
+ am_compiler_list=`sed -n ['s/^#*\([a-zA-Z0-9]*\))$/\1/p'] < ./depcomp`
+ fi
+ am__universal=false
+ m4_case([$1], [CC],
+ [case " $depcc " in #(
+ *\ -arch\ *\ -arch\ *) am__universal=true ;;
+ esac],
+ [CXX],
+ [case " $depcc " in #(
+ *\ -arch\ *\ -arch\ *) am__universal=true ;;
+ esac])
+
+ for depmode in $am_compiler_list; do
+ # Setup a source with many dependencies, because some compilers
+ # like to wrap large dependency lists on column 80 (with \), and
+ # we should not choose a depcomp mode which is confused by this.
+ #
+ # We need to recreate these files for each test, as the compiler may
+ # overwrite some of them when testing with obscure command lines.
+ # This happens at least with the AIX C compiler.
+ : > sub/conftest.c
+ for i in 1 2 3 4 5 6; do
+ echo '#include "conftst'$i'.h"' >> sub/conftest.c
+ # Using `: > sub/conftst$i.h' creates only sub/conftst1.h with
+ # Solaris 8's {/usr,}/bin/sh.
+ touch sub/conftst$i.h
+ done
+ echo "${am__include} ${am__quote}sub/conftest.Po${am__quote}" > confmf
+
+ # We check with `-c' and `-o' for the sake of the "dashmstdout"
+ # mode. It turns out that the SunPro C++ compiler does not properly
+ # handle `-M -o', and we need to detect this. Also, some Intel
+ # versions had trouble with output in subdirs
+ am__obj=sub/conftest.${OBJEXT-o}
+ am__minus_obj="-o $am__obj"
+ case $depmode in
+ gcc)
+ # This depmode causes a compiler race in universal mode.
+ test "$am__universal" = false || continue
+ ;;
+ nosideeffect)
+ # after this tag, mechanisms are not by side-effect, so they'll
+ # only be used when explicitly requested
+ if test "x$enable_dependency_tracking" = xyes; then
+ continue
+ else
+ break
+ fi
+ ;;
+ msvisualcpp | msvcmsys)
+ # This compiler won't grok `-c -o', but also, the minuso test has
+ # not run yet. These depmodes are late enough in the game, and
+ # so weak that their functioning should not be impacted.
+ am__obj=conftest.${OBJEXT-o}
+ am__minus_obj=
+ ;;
+ none) break ;;
+ esac
+ if depmode=$depmode \
+ source=sub/conftest.c object=$am__obj \
+ depfile=sub/conftest.Po tmpdepfile=sub/conftest.TPo \
+ $SHELL ./depcomp $depcc -c $am__minus_obj sub/conftest.c \
+ >/dev/null 2>conftest.err &&
+ grep sub/conftst1.h sub/conftest.Po > /dev/null 2>&1 &&
+ grep sub/conftst6.h sub/conftest.Po > /dev/null 2>&1 &&
+ grep $am__obj sub/conftest.Po > /dev/null 2>&1 &&
+ ${MAKE-make} -s -f confmf > /dev/null 2>&1; then
+ # icc doesn't choke on unknown options, it will just issue warnings
+ # or remarks (even with -Werror). So we grep stderr for any message
+ # that says an option was ignored or not supported.
+ # When given -MP, icc 7.0 and 7.1 complain thusly:
+ # icc: Command line warning: ignoring option '-M'; no argument required
+ # The diagnosis changed in icc 8.0:
+ # icc: Command line remark: option '-MP' not supported
+ if (grep 'ignoring option' conftest.err ||
+ grep 'not supported' conftest.err) >/dev/null 2>&1; then :; else
+ am_cv_$1_dependencies_compiler_type=$depmode
+ break
+ fi
+ fi
+ done
+
+ cd ..
+ rm -rf conftest.dir
+else
+ am_cv_$1_dependencies_compiler_type=none
+fi
+])
+AC_SUBST([$1DEPMODE], [depmode=$am_cv_$1_dependencies_compiler_type])
+AM_CONDITIONAL([am__fastdep$1], [
+ test "x$enable_dependency_tracking" != xno \
+ && test "$am_cv_$1_dependencies_compiler_type" = gcc3])
+])
+
+
+# AM_SET_DEPDIR
+# -------------
+# Choose a directory name for dependency files.
+# This macro is AC_REQUIREd in _AM_DEPENDENCIES
+AC_DEFUN([AM_SET_DEPDIR],
+[AC_REQUIRE([AM_SET_LEADING_DOT])dnl
+AC_SUBST([DEPDIR], ["${am__leading_dot}deps"])dnl
+])
+
+
+# AM_DEP_TRACK
+# ------------
+AC_DEFUN([AM_DEP_TRACK],
+[AC_ARG_ENABLE(dependency-tracking,
+[ --disable-dependency-tracking speeds up one-time build
+ --enable-dependency-tracking do not reject slow dependency extractors])
+if test "x$enable_dependency_tracking" != xno; then
+ am_depcomp="$ac_aux_dir/depcomp"
+ AMDEPBACKSLASH='\'
+fi
+AM_CONDITIONAL([AMDEP], [test "x$enable_dependency_tracking" != xno])
+AC_SUBST([AMDEPBACKSLASH])dnl
+_AM_SUBST_NOTMAKE([AMDEPBACKSLASH])dnl
+])
+
+# Generate code to set up dependency tracking. -*- Autoconf -*-
+
+# Copyright (C) 1999, 2000, 2001, 2002, 2003, 2004, 2005, 2008
+# Free Software Foundation, Inc.
+#
+# This file is free software; the Free Software Foundation
+# gives unlimited permission to copy and/or distribute it,
+# with or without modifications, as long as this notice is preserved.
+
+#serial 5
+
+# _AM_OUTPUT_DEPENDENCY_COMMANDS
+# ------------------------------
+AC_DEFUN([_AM_OUTPUT_DEPENDENCY_COMMANDS],
+[{
+ # Autoconf 2.62 quotes --file arguments for eval, but not when files
+ # are listed without --file. Let's play safe and only enable the eval
+ # if we detect the quoting.
+ case $CONFIG_FILES in
+ *\'*) eval set x "$CONFIG_FILES" ;;
+ *) set x $CONFIG_FILES ;;
+ esac
+ shift
+ for mf
+ do
+ # Strip MF so we end up with the name of the file.
+ mf=`echo "$mf" | sed -e 's/:.*$//'`
+ # Check whether this is an Automake generated Makefile or not.
+ # We used to match only the files named `Makefile.in', but
+ # some people rename them; so instead we look at the file content.
+ # Grep'ing the first line is not enough: some people post-process
+ # each Makefile.in and add a new line on top of each file to say so.
+ # Grep'ing the whole file is not good either: AIX grep has a line
+ # limit of 2048, but all sed's we know have understand at least 4000.
+ if sed -n 's,^#.*generated by automake.*,X,p' "$mf" | grep X >/dev/null 2>&1; then
+ dirpart=`AS_DIRNAME("$mf")`
+ else
+ continue
+ fi
+ # Extract the definition of DEPDIR, am__include, and am__quote
+ # from the Makefile without running `make'.
+ DEPDIR=`sed -n 's/^DEPDIR = //p' < "$mf"`
+ test -z "$DEPDIR" && continue
+ am__include=`sed -n 's/^am__include = //p' < "$mf"`
+ test -z "am__include" && continue
+ am__quote=`sed -n 's/^am__quote = //p' < "$mf"`
+ # When using ansi2knr, U may be empty or an underscore; expand it
+ U=`sed -n 's/^U = //p' < "$mf"`
+ # Find all dependency output files, they are included files with
+ # $(DEPDIR) in their names. We invoke sed twice because it is the
+ # simplest approach to changing $(DEPDIR) to its actual value in the
+ # expansion.
+ for file in `sed -n "
+ s/^$am__include $am__quote\(.*(DEPDIR).*\)$am__quote"'$/\1/p' <"$mf" | \
+ sed -e 's/\$(DEPDIR)/'"$DEPDIR"'/g' -e 's/\$U/'"$U"'/g'`; do
+ # Make sure the directory exists.
+ test -f "$dirpart/$file" && continue
+ fdir=`AS_DIRNAME(["$file"])`
+ AS_MKDIR_P([$dirpart/$fdir])
+ # echo "creating $dirpart/$file"
+ echo '# dummy' > "$dirpart/$file"
+ done
+ done
+}
+])# _AM_OUTPUT_DEPENDENCY_COMMANDS
+
+
+# AM_OUTPUT_DEPENDENCY_COMMANDS
+# -----------------------------
+# This macro should only be invoked once -- use via AC_REQUIRE.
+#
+# This code is only required when automatic dependency tracking
+# is enabled. FIXME. This creates each `.P' file that we will
+# need in order to bootstrap the dependency handling code.
+AC_DEFUN([AM_OUTPUT_DEPENDENCY_COMMANDS],
+[AC_CONFIG_COMMANDS([depfiles],
+ [test x"$AMDEP_TRUE" != x"" || _AM_OUTPUT_DEPENDENCY_COMMANDS],
+ [AMDEP_TRUE="$AMDEP_TRUE" ac_aux_dir="$ac_aux_dir"])
+])
+
+# Do all the work for Automake. -*- Autoconf -*-
+
+# Copyright (C) 1996, 1997, 1998, 1999, 2000, 2001, 2002, 2003, 2004,
+# 2005, 2006, 2008, 2009 Free Software Foundation, Inc.
+#
+# This file is free software; the Free Software Foundation
+# gives unlimited permission to copy and/or distribute it,
+# with or without modifications, as long as this notice is preserved.
+
+# serial 16
+
+# This macro actually does too much. Some checks are only needed if
+# your package does certain things. But this isn't really a big deal.
+
+# AM_INIT_AUTOMAKE(PACKAGE, VERSION, [NO-DEFINE])
+# AM_INIT_AUTOMAKE([OPTIONS])
+# -----------------------------------------------
+# The call with PACKAGE and VERSION arguments is the old style
+# call (pre autoconf-2.50), which is being phased out. PACKAGE
+# and VERSION should now be passed to AC_INIT and removed from
+# the call to AM_INIT_AUTOMAKE.
+# We support both call styles for the transition. After
+# the next Automake release, Autoconf can make the AC_INIT
+# arguments mandatory, and then we can depend on a new Autoconf
+# release and drop the old call support.
+AC_DEFUN([AM_INIT_AUTOMAKE],
+[AC_PREREQ([2.62])dnl
+dnl Autoconf wants to disallow AM_ names. We explicitly allow
+dnl the ones we care about.
+m4_pattern_allow([^AM_[A-Z]+FLAGS$])dnl
+AC_REQUIRE([AM_SET_CURRENT_AUTOMAKE_VERSION])dnl
+AC_REQUIRE([AC_PROG_INSTALL])dnl
+if test "`cd $srcdir && pwd`" != "`pwd`"; then
+ # Use -I$(srcdir) only when $(srcdir) != ., so that make's output
+ # is not polluted with repeated "-I."
+ AC_SUBST([am__isrc], [' -I$(srcdir)'])_AM_SUBST_NOTMAKE([am__isrc])dnl
+ # test to see if srcdir already configured
+ if test -f $srcdir/config.status; then
+ AC_MSG_ERROR([source directory already configured; run "make distclean" there first])
+ fi
+fi
+
+# test whether we have cygpath
+if test -z "$CYGPATH_W"; then
+ if (cygpath --version) >/dev/null 2>/dev/null; then
+ CYGPATH_W='cygpath -w'
+ else
+ CYGPATH_W=echo
+ fi
+fi
+AC_SUBST([CYGPATH_W])
+
+# Define the identity of the package.
+dnl Distinguish between old-style and new-style calls.
+m4_ifval([$2],
+[m4_ifval([$3], [_AM_SET_OPTION([no-define])])dnl
+ AC_SUBST([PACKAGE], [$1])dnl
+ AC_SUBST([VERSION], [$2])],
+[_AM_SET_OPTIONS([$1])dnl
+dnl Diagnose old-style AC_INIT with new-style AM_AUTOMAKE_INIT.
+m4_if(m4_ifdef([AC_PACKAGE_NAME], 1)m4_ifdef([AC_PACKAGE_VERSION], 1), 11,,
+ [m4_fatal([AC_INIT should be called with package and version arguments])])dnl
+ AC_SUBST([PACKAGE], ['AC_PACKAGE_TARNAME'])dnl
+ AC_SUBST([VERSION], ['AC_PACKAGE_VERSION'])])dnl
+
+_AM_IF_OPTION([no-define],,
+[AC_DEFINE_UNQUOTED(PACKAGE, "$PACKAGE", [Name of package])
+ AC_DEFINE_UNQUOTED(VERSION, "$VERSION", [Version number of package])])dnl
+
+# Some tools Automake needs.
+AC_REQUIRE([AM_SANITY_CHECK])dnl
+AC_REQUIRE([AC_ARG_PROGRAM])dnl
+AM_MISSING_PROG(ACLOCAL, aclocal-${am__api_version})
+AM_MISSING_PROG(AUTOCONF, autoconf)
+AM_MISSING_PROG(AUTOMAKE, automake-${am__api_version})
+AM_MISSING_PROG(AUTOHEADER, autoheader)
+AM_MISSING_PROG(MAKEINFO, makeinfo)
+AC_REQUIRE([AM_PROG_INSTALL_SH])dnl
+AC_REQUIRE([AM_PROG_INSTALL_STRIP])dnl
+AC_REQUIRE([AM_PROG_MKDIR_P])dnl
+# We need awk for the "check" target. The system "awk" is bad on
+# some platforms.
+AC_REQUIRE([AC_PROG_AWK])dnl
+AC_REQUIRE([AC_PROG_MAKE_SET])dnl
+AC_REQUIRE([AM_SET_LEADING_DOT])dnl
+_AM_IF_OPTION([tar-ustar], [_AM_PROG_TAR([ustar])],
+ [_AM_IF_OPTION([tar-pax], [_AM_PROG_TAR([pax])],
+ [_AM_PROG_TAR([v7])])])
+_AM_IF_OPTION([no-dependencies],,
+[AC_PROVIDE_IFELSE([AC_PROG_CC],
+ [_AM_DEPENDENCIES(CC)],
+ [define([AC_PROG_CC],
+ defn([AC_PROG_CC])[_AM_DEPENDENCIES(CC)])])dnl
+AC_PROVIDE_IFELSE([AC_PROG_CXX],
+ [_AM_DEPENDENCIES(CXX)],
+ [define([AC_PROG_CXX],
+ defn([AC_PROG_CXX])[_AM_DEPENDENCIES(CXX)])])dnl
+AC_PROVIDE_IFELSE([AC_PROG_OBJC],
+ [_AM_DEPENDENCIES(OBJC)],
+ [define([AC_PROG_OBJC],
+ defn([AC_PROG_OBJC])[_AM_DEPENDENCIES(OBJC)])])dnl
+])
+_AM_IF_OPTION([silent-rules], [AC_REQUIRE([AM_SILENT_RULES])])dnl
+dnl The `parallel-tests' driver may need to know about EXEEXT, so add the
+dnl `am__EXEEXT' conditional if _AM_COMPILER_EXEEXT was seen. This macro
+dnl is hooked onto _AC_COMPILER_EXEEXT early, see below.
+AC_CONFIG_COMMANDS_PRE(dnl
+[m4_provide_if([_AM_COMPILER_EXEEXT],
+ [AM_CONDITIONAL([am__EXEEXT], [test -n "$EXEEXT"])])])dnl
+])
+
+dnl Hook into `_AC_COMPILER_EXEEXT' early to learn its expansion. Do not
+dnl add the conditional right here, as _AC_COMPILER_EXEEXT may be further
+dnl mangled by Autoconf and run in a shell conditional statement.
+m4_define([_AC_COMPILER_EXEEXT],
+m4_defn([_AC_COMPILER_EXEEXT])[m4_provide([_AM_COMPILER_EXEEXT])])
+
+
+# When config.status generates a header, we must update the stamp-h file.
+# This file resides in the same directory as the config header
+# that is generated. The stamp files are numbered to have different names.
+
+# Autoconf calls _AC_AM_CONFIG_HEADER_HOOK (when defined) in the
+# loop where config.status creates the headers, so we can generate
+# our stamp files there.
+AC_DEFUN([_AC_AM_CONFIG_HEADER_HOOK],
+[# Compute $1's index in $config_headers.
+_am_arg=$1
+_am_stamp_count=1
+for _am_header in $config_headers :; do
+ case $_am_header in
+ $_am_arg | $_am_arg:* )
+ break ;;
+ * )
+ _am_stamp_count=`expr $_am_stamp_count + 1` ;;
+ esac
+done
+echo "timestamp for $_am_arg" >`AS_DIRNAME(["$_am_arg"])`/stamp-h[]$_am_stamp_count])
+
+# Copyright (C) 2001, 2003, 2005, 2008 Free Software Foundation, Inc.
+#
+# This file is free software; the Free Software Foundation
+# gives unlimited permission to copy and/or distribute it,
+# with or without modifications, as long as this notice is preserved.
+
+# AM_PROG_INSTALL_SH
+# ------------------
+# Define $install_sh.
+AC_DEFUN([AM_PROG_INSTALL_SH],
+[AC_REQUIRE([AM_AUX_DIR_EXPAND])dnl
+if test x"${install_sh}" != xset; then
+ case $am_aux_dir in
+ *\ * | *\ *)
+ install_sh="\${SHELL} '$am_aux_dir/install-sh'" ;;
+ *)
+ install_sh="\${SHELL} $am_aux_dir/install-sh"
+ esac
+fi
+AC_SUBST(install_sh)])
+
+# Copyright (C) 2003, 2005 Free Software Foundation, Inc.
+#
+# This file is free software; the Free Software Foundation
+# gives unlimited permission to copy and/or distribute it,
+# with or without modifications, as long as this notice is preserved.
+
+# serial 2
+
+# Check whether the underlying file-system supports filenames
+# with a leading dot. For instance MS-DOS doesn't.
+AC_DEFUN([AM_SET_LEADING_DOT],
+[rm -rf .tst 2>/dev/null
+mkdir .tst 2>/dev/null
+if test -d .tst; then
+ am__leading_dot=.
+else
+ am__leading_dot=_
+fi
+rmdir .tst 2>/dev/null
+AC_SUBST([am__leading_dot])])
+
+# Check to see how 'make' treats includes. -*- Autoconf -*-
+
+# Copyright (C) 2001, 2002, 2003, 2005, 2009 Free Software Foundation, Inc.
+#
+# This file is free software; the Free Software Foundation
+# gives unlimited permission to copy and/or distribute it,
+# with or without modifications, as long as this notice is preserved.
+
+# serial 4
+
+# AM_MAKE_INCLUDE()
+# -----------------
+# Check to see how make treats includes.
+AC_DEFUN([AM_MAKE_INCLUDE],
+[am_make=${MAKE-make}
+cat > confinc << 'END'
+am__doit:
+ @echo this is the am__doit target
+.PHONY: am__doit
+END
+# If we don't find an include directive, just comment out the code.
+AC_MSG_CHECKING([for style of include used by $am_make])
+am__include="#"
+am__quote=
+_am_result=none
+# First try GNU make style include.
+echo "include confinc" > confmf
+# Ignore all kinds of additional output from `make'.
+case `$am_make -s -f confmf 2> /dev/null` in #(
+*the\ am__doit\ target*)
+ am__include=include
+ am__quote=
+ _am_result=GNU
+ ;;
+esac
+# Now try BSD make style include.
+if test "$am__include" = "#"; then
+ echo '.include "confinc"' > confmf
+ case `$am_make -s -f confmf 2> /dev/null` in #(
+ *the\ am__doit\ target*)
+ am__include=.include
+ am__quote="\""
+ _am_result=BSD
+ ;;
+ esac
+fi
+AC_SUBST([am__include])
+AC_SUBST([am__quote])
+AC_MSG_RESULT([$_am_result])
+rm -f confinc confmf
+])
+
+# Copyright (C) 1999, 2000, 2001, 2003, 2004, 2005, 2008
+# Free Software Foundation, Inc.
+#
+# This file is free software; the Free Software Foundation
+# gives unlimited permission to copy and/or distribute it,
+# with or without modifications, as long as this notice is preserved.
+
+# serial 6
+
+# AM_PROG_CC_C_O
+# --------------
+# Like AC_PROG_CC_C_O, but changed for automake.
+AC_DEFUN([AM_PROG_CC_C_O],
+[AC_REQUIRE([AC_PROG_CC_C_O])dnl
+AC_REQUIRE([AM_AUX_DIR_EXPAND])dnl
+AC_REQUIRE_AUX_FILE([compile])dnl
+# FIXME: we rely on the cache variable name because
+# there is no other way.
+set dummy $CC
+am_cc=`echo $[2] | sed ['s/[^a-zA-Z0-9_]/_/g;s/^[0-9]/_/']`
+eval am_t=\$ac_cv_prog_cc_${am_cc}_c_o
+if test "$am_t" != yes; then
+ # Losing compiler, so override with the script.
+ # FIXME: It is wrong to rewrite CC.
+ # But if we don't then we get into trouble of one sort or another.
+ # A longer-term fix would be to have automake use am__CC in this case,
+ # and then we could set am__CC="\$(top_srcdir)/compile \$(CC)"
+ CC="$am_aux_dir/compile $CC"
+fi
+dnl Make sure AC_PROG_CC is never called again, or it will override our
+dnl setting of CC.
+m4_define([AC_PROG_CC],
+ [m4_fatal([AC_PROG_CC cannot be called after AM_PROG_CC_C_O])])
+])
+
+# Fake the existence of programs that GNU maintainers use. -*- Autoconf -*-
+
+# Copyright (C) 1997, 1999, 2000, 2001, 2003, 2004, 2005, 2008
+# Free Software Foundation, Inc.
+#
+# This file is free software; the Free Software Foundation
+# gives unlimited permission to copy and/or distribute it,
+# with or without modifications, as long as this notice is preserved.
+
+# serial 6
+
+# AM_MISSING_PROG(NAME, PROGRAM)
+# ------------------------------
+AC_DEFUN([AM_MISSING_PROG],
+[AC_REQUIRE([AM_MISSING_HAS_RUN])
+$1=${$1-"${am_missing_run}$2"}
+AC_SUBST($1)])
+
+
+# AM_MISSING_HAS_RUN
+# ------------------
+# Define MISSING if not defined so far and test if it supports --run.
+# If it does, set am_missing_run to use it, otherwise, to nothing.
+AC_DEFUN([AM_MISSING_HAS_RUN],
+[AC_REQUIRE([AM_AUX_DIR_EXPAND])dnl
+AC_REQUIRE_AUX_FILE([missing])dnl
+if test x"${MISSING+set}" != xset; then
+ case $am_aux_dir in
+ *\ * | *\ *)
+ MISSING="\${SHELL} \"$am_aux_dir/missing\"" ;;
+ *)
+ MISSING="\${SHELL} $am_aux_dir/missing" ;;
+ esac
+fi
+# Use eval to expand $SHELL
+if eval "$MISSING --run true"; then
+ am_missing_run="$MISSING --run "
+else
+ am_missing_run=
+ AC_MSG_WARN([`missing' script is too old or missing])
+fi
+])
+
+# Copyright (C) 2003, 2004, 2005, 2006 Free Software Foundation, Inc.
+#
+# This file is free software; the Free Software Foundation
+# gives unlimited permission to copy and/or distribute it,
+# with or without modifications, as long as this notice is preserved.
+
+# AM_PROG_MKDIR_P
+# ---------------
+# Check for `mkdir -p'.
+AC_DEFUN([AM_PROG_MKDIR_P],
+[AC_PREREQ([2.60])dnl
+AC_REQUIRE([AC_PROG_MKDIR_P])dnl
+dnl Automake 1.8 to 1.9.6 used to define mkdir_p. We now use MKDIR_P,
+dnl while keeping a definition of mkdir_p for backward compatibility.
+dnl @MKDIR_P@ is magic: AC_OUTPUT adjusts its value for each Makefile.
+dnl However we cannot define mkdir_p as $(MKDIR_P) for the sake of
+dnl Makefile.ins that do not define MKDIR_P, so we do our own
+dnl adjustment using top_builddir (which is defined more often than
+dnl MKDIR_P).
+AC_SUBST([mkdir_p], ["$MKDIR_P"])dnl
+case $mkdir_p in
+ [[\\/$]]* | ?:[[\\/]]*) ;;
+ */*) mkdir_p="\$(top_builddir)/$mkdir_p" ;;
+esac
+])
+
+# Helper functions for option handling. -*- Autoconf -*-
+
+# Copyright (C) 2001, 2002, 2003, 2005, 2008 Free Software Foundation, Inc.
+#
+# This file is free software; the Free Software Foundation
+# gives unlimited permission to copy and/or distribute it,
+# with or without modifications, as long as this notice is preserved.
+
+# serial 4
+
+# _AM_MANGLE_OPTION(NAME)
+# -----------------------
+AC_DEFUN([_AM_MANGLE_OPTION],
+[[_AM_OPTION_]m4_bpatsubst($1, [[^a-zA-Z0-9_]], [_])])
+
+# _AM_SET_OPTION(NAME)
+# ------------------------------
+# Set option NAME. Presently that only means defining a flag for this option.
+AC_DEFUN([_AM_SET_OPTION],
+[m4_define(_AM_MANGLE_OPTION([$1]), 1)])
+
+# _AM_SET_OPTIONS(OPTIONS)
+# ----------------------------------
+# OPTIONS is a space-separated list of Automake options.
+AC_DEFUN([_AM_SET_OPTIONS],
+[m4_foreach_w([_AM_Option], [$1], [_AM_SET_OPTION(_AM_Option)])])
+
+# _AM_IF_OPTION(OPTION, IF-SET, [IF-NOT-SET])
+# -------------------------------------------
+# Execute IF-SET if OPTION is set, IF-NOT-SET otherwise.
+AC_DEFUN([_AM_IF_OPTION],
+[m4_ifset(_AM_MANGLE_OPTION([$1]), [$2], [$3])])
+
+# Check to make sure that the build environment is sane. -*- Autoconf -*-
+
+# Copyright (C) 1996, 1997, 2000, 2001, 2003, 2005, 2008
+# Free Software Foundation, Inc.
+#
+# This file is free software; the Free Software Foundation
+# gives unlimited permission to copy and/or distribute it,
+# with or without modifications, as long as this notice is preserved.
+
+# serial 5
+
+# AM_SANITY_CHECK
+# ---------------
+AC_DEFUN([AM_SANITY_CHECK],
+[AC_MSG_CHECKING([whether build environment is sane])
+# Just in case
+sleep 1
+echo timestamp > conftest.file
+# Reject unsafe characters in $srcdir or the absolute working directory
+# name. Accept space and tab only in the latter.
+am_lf='
+'
+case `pwd` in
+ *[[\\\"\#\$\&\'\`$am_lf]]*)
+ AC_MSG_ERROR([unsafe absolute working directory name]);;
+esac
+case $srcdir in
+ *[[\\\"\#\$\&\'\`$am_lf\ \ ]]*)
+ AC_MSG_ERROR([unsafe srcdir value: `$srcdir']);;
+esac
+
+# Do `set' in a subshell so we don't clobber the current shell's
+# arguments. Must try -L first in case configure is actually a
+# symlink; some systems play weird games with the mod time of symlinks
+# (eg FreeBSD returns the mod time of the symlink's containing
+# directory).
+if (
+ set X `ls -Lt "$srcdir/configure" conftest.file 2> /dev/null`
+ if test "$[*]" = "X"; then
+ # -L didn't work.
+ set X `ls -t "$srcdir/configure" conftest.file`
+ fi
+ rm -f conftest.file
+ if test "$[*]" != "X $srcdir/configure conftest.file" \
+ && test "$[*]" != "X conftest.file $srcdir/configure"; then
+
+ # If neither matched, then we have a broken ls. This can happen
+ # if, for instance, CONFIG_SHELL is bash and it inherits a
+ # broken ls alias from the environment. This has actually
+ # happened. Such a system could not be considered "sane".
+ AC_MSG_ERROR([ls -t appears to fail. Make sure there is not a broken
+alias in your environment])
+ fi
+
+ test "$[2]" = conftest.file
+ )
+then
+ # Ok.
+ :
+else
+ AC_MSG_ERROR([newly created file is older than distributed files!
+Check your system clock])
+fi
+AC_MSG_RESULT(yes)])
+
+# Copyright (C) 2001, 2003, 2005 Free Software Foundation, Inc.
+#
+# This file is free software; the Free Software Foundation
+# gives unlimited permission to copy and/or distribute it,
+# with or without modifications, as long as this notice is preserved.
+
+# AM_PROG_INSTALL_STRIP
+# ---------------------
+# One issue with vendor `install' (even GNU) is that you can't
+# specify the program used to strip binaries. This is especially
+# annoying in cross-compiling environments, where the build's strip
+# is unlikely to handle the host's binaries.
+# Fortunately install-sh will honor a STRIPPROG variable, so we
+# always use install-sh in `make install-strip', and initialize
+# STRIPPROG with the value of the STRIP variable (set by the user).
+AC_DEFUN([AM_PROG_INSTALL_STRIP],
+[AC_REQUIRE([AM_PROG_INSTALL_SH])dnl
+# Installed binaries are usually stripped using `strip' when the user
+# run `make install-strip'. However `strip' might not be the right
+# tool to use in cross-compilation environments, therefore Automake
+# will honor the `STRIP' environment variable to overrule this program.
+dnl Don't test for $cross_compiling = yes, because it might be `maybe'.
+if test "$cross_compiling" != no; then
+ AC_CHECK_TOOL([STRIP], [strip], :)
+fi
+INSTALL_STRIP_PROGRAM="\$(install_sh) -c -s"
+AC_SUBST([INSTALL_STRIP_PROGRAM])])
+
+# Copyright (C) 2006, 2008 Free Software Foundation, Inc.
+#
+# This file is free software; the Free Software Foundation
+# gives unlimited permission to copy and/or distribute it,
+# with or without modifications, as long as this notice is preserved.
+
+# serial 2
+
+# _AM_SUBST_NOTMAKE(VARIABLE)
+# ---------------------------
+# Prevent Automake from outputting VARIABLE = @VARIABLE@ in Makefile.in.
+# This macro is traced by Automake.
+AC_DEFUN([_AM_SUBST_NOTMAKE])
+
+# AM_SUBST_NOTMAKE(VARIABLE)
+# ---------------------------
+# Public sister of _AM_SUBST_NOTMAKE.
+AC_DEFUN([AM_SUBST_NOTMAKE], [_AM_SUBST_NOTMAKE($@)])
+
+# Check how to create a tarball. -*- Autoconf -*-
+
+# Copyright (C) 2004, 2005 Free Software Foundation, Inc.
+#
+# This file is free software; the Free Software Foundation
+# gives unlimited permission to copy and/or distribute it,
+# with or without modifications, as long as this notice is preserved.
+
+# serial 2
+
+# _AM_PROG_TAR(FORMAT)
+# --------------------
+# Check how to create a tarball in format FORMAT.
+# FORMAT should be one of `v7', `ustar', or `pax'.
+#
+# Substitute a variable $(am__tar) that is a command
+# writing to stdout a FORMAT-tarball containing the directory
+# $tardir.
+# tardir=directory && $(am__tar) > result.tar
+#
+# Substitute a variable $(am__untar) that extract such
+# a tarball read from stdin.
+# $(am__untar) < result.tar
+AC_DEFUN([_AM_PROG_TAR],
+[# Always define AMTAR for backward compatibility.
+AM_MISSING_PROG([AMTAR], [tar])
+m4_if([$1], [v7],
+ [am__tar='${AMTAR} chof - "$$tardir"'; am__untar='${AMTAR} xf -'],
+ [m4_case([$1], [ustar],, [pax],,
+ [m4_fatal([Unknown tar format])])
+AC_MSG_CHECKING([how to create a $1 tar archive])
+# Loop over all known methods to create a tar archive until one works.
+_am_tools='gnutar m4_if([$1], [ustar], [plaintar]) pax cpio none'
+_am_tools=${am_cv_prog_tar_$1-$_am_tools}
+# Do not fold the above two line into one, because Tru64 sh and
+# Solaris sh will not grok spaces in the rhs of `-'.
+for _am_tool in $_am_tools
+do
+ case $_am_tool in
+ gnutar)
+ for _am_tar in tar gnutar gtar;
+ do
+ AM_RUN_LOG([$_am_tar --version]) && break
+ done
+ am__tar="$_am_tar --format=m4_if([$1], [pax], [posix], [$1]) -chf - "'"$$tardir"'
+ am__tar_="$_am_tar --format=m4_if([$1], [pax], [posix], [$1]) -chf - "'"$tardir"'
+ am__untar="$_am_tar -xf -"
+ ;;
+ plaintar)
+ # Must skip GNU tar: if it does not support --format= it doesn't create
+ # ustar tarball either.
+ (tar --version) >/dev/null 2>&1 && continue
+ am__tar='tar chf - "$$tardir"'
+ am__tar_='tar chf - "$tardir"'
+ am__untar='tar xf -'
+ ;;
+ pax)
+ am__tar='pax -L -x $1 -w "$$tardir"'
+ am__tar_='pax -L -x $1 -w "$tardir"'
+ am__untar='pax -r'
+ ;;
+ cpio)
+ am__tar='find "$$tardir" -print | cpio -o -H $1 -L'
+ am__tar_='find "$tardir" -print | cpio -o -H $1 -L'
+ am__untar='cpio -i -H $1 -d'
+ ;;
+ none)
+ am__tar=false
+ am__tar_=false
+ am__untar=false
+ ;;
+ esac
+
+ # If the value was cached, stop now. We just wanted to have am__tar
+ # and am__untar set.
+ test -n "${am_cv_prog_tar_$1}" && break
+
+ # tar/untar a dummy directory, and stop if the command works
+ rm -rf conftest.dir
+ mkdir conftest.dir
+ echo GrepMe > conftest.dir/file
+ AM_RUN_LOG([tardir=conftest.dir && eval $am__tar_ >conftest.tar])
+ rm -rf conftest.dir
+ if test -s conftest.tar; then
+ AM_RUN_LOG([$am__untar <conftest.tar])
+ grep GrepMe conftest.dir/file >/dev/null 2>&1 && break
+ fi
+done
+rm -rf conftest.dir
+
+AC_CACHE_VAL([am_cv_prog_tar_$1], [am_cv_prog_tar_$1=$_am_tool])
+AC_MSG_RESULT([$am_cv_prog_tar_$1])])
+AC_SUBST([am__tar])
+AC_SUBST([am__untar])
+]) # _AM_PROG_TAR
+
+m4_include([m4/acx_pthread.m4])
+m4_include([m4/getopt.m4])
+m4_include([m4/gettext.m4])
+m4_include([m4/iconv.m4])
+m4_include([m4/lc_cpucores.m4])
+m4_include([m4/lc_physmem.m4])
+m4_include([m4/lib-ld.m4])
+m4_include([m4/lib-link.m4])
+m4_include([m4/lib-prefix.m4])
+m4_include([m4/libtool.m4])
+m4_include([m4/ltoptions.m4])
+m4_include([m4/ltsugar.m4])
+m4_include([m4/ltversion.m4])
+m4_include([m4/lt~obsolete.m4])
+m4_include([m4/nls.m4])
+m4_include([m4/po.m4])
+m4_include([m4/posix-shell.m4])
+m4_include([m4/progtest.m4])
+m4_include([m4/visibility.m4])
diff --git a/Build/source/utils/xz-4.999.9beta/autogen.sh b/Build/source/utils/xz-4.999.9beta/autogen.sh
new file mode 100755
index 00000000000..f0195ecadd3
--- /dev/null
+++ b/Build/source/utils/xz-4.999.9beta/autogen.sh
@@ -0,0 +1,22 @@
+#!/bin/sh
+
+###############################################################################
+#
+# Author: Lasse Collin
+#
+# This file has been put into the public domain.
+# You can do whatever you want with this file.
+#
+###############################################################################
+
+# The result of using "autoreconf -fi" should be identical to using this
+# script. I'm leaving this script here just in case someone finds it useful.
+
+set -e -x
+
+${AUTOPOINT:-autopoint} -f
+${LIBTOOLIZE:-libtoolize} -c -f || glibtoolize -c -f
+${ACLOCAL:-aclocal} -I m4
+${AUTOCONF:-autoconf}
+${AUTOHEADER:-autoheader}
+${AUTOMAKE:-automake} -acf --foreign
diff --git a/Build/source/utils/xz-4.999.8beta/compile b/Build/source/utils/xz-4.999.9beta/build-aux/compile
index 1b1d2321695..ec64c622026 100755
--- a/Build/source/utils/xz-4.999.8beta/compile
+++ b/Build/source/utils/xz-4.999.9beta/build-aux/compile
@@ -1,9 +1,10 @@
#! /bin/sh
# Wrapper for compilers which do not understand `-c -o'.
-scriptversion=2005-05-14.22
+scriptversion=2009-04-28.21; # UTC
-# Copyright (C) 1999, 2000, 2003, 2004, 2005 Free Software Foundation, Inc.
+# Copyright (C) 1999, 2000, 2003, 2004, 2005, 2009 Free Software
+# Foundation, Inc.
# Written by Tom Tromey <tromey@cygnus.com>.
#
# This program is free software; you can redistribute it and/or modify
@@ -17,8 +18,7 @@ scriptversion=2005-05-14.22
# GNU General Public License for more details.
#
# You should have received a copy of the GNU General Public License
-# along with this program; if not, write to the Free Software
-# Foundation, Inc., 51 Franklin Street, Fifth Floor, Boston, MA 02110-1301, USA.
+# along with this program. If not, see <http://www.gnu.org/licenses/>.
# As a special exception to the GNU General Public License, if you
# distribute this file as part of a program that contains a
@@ -103,13 +103,13 @@ if test -z "$ofile" || test -z "$cfile"; then
fi
# Name of file we expect compiler to create.
-cofile=`echo "$cfile" | sed -e 's|^.*/||' -e 's/\.c$/.o/'`
+cofile=`echo "$cfile" | sed 's|^.*[\\/]||; s|^[a-zA-Z]:||; s/\.c$/.o/'`
# Create the lock directory.
-# Note: use `[/.-]' here to ensure that we don't use the same name
+# Note: use `[/\\:.-]' here to ensure that we don't use the same name
# that we are using for the .o file. Also, base the name on the expected
# object file name, since that is what matters with a parallel build.
-lockdir=`echo "$cofile" | sed -e 's|[/.-]|_|g'`.d
+lockdir=`echo "$cofile" | sed -e 's|[/\\:.-]|_|g'`.d
while true; do
if mkdir "$lockdir" >/dev/null 2>&1; then
break
@@ -138,5 +138,6 @@ exit $ret
# eval: (add-hook 'write-file-hooks 'time-stamp)
# time-stamp-start: "scriptversion="
# time-stamp-format: "%:y-%02m-%02d.%02H"
-# time-stamp-end: "$"
+# time-stamp-time-zone: "UTC"
+# time-stamp-end: "; # UTC"
# End:
diff --git a/Build/source/utils/xz-4.999.8beta/config.guess b/Build/source/utils/xz-4.999.9beta/build-aux/config.guess
index bb0b03ea114..da833146088 100755
--- a/Build/source/utils/xz-4.999.8beta/config.guess
+++ b/Build/source/utils/xz-4.999.9beta/build-aux/config.guess
@@ -1,10 +1,10 @@
#! /bin/sh
# Attempt to guess a canonical system name.
# Copyright (C) 1992, 1993, 1994, 1995, 1996, 1997, 1998, 1999,
-# 2000, 2001, 2002, 2003, 2004, 2005, 2006, 2007, 2008, 2009
+# 2000, 2001, 2002, 2003, 2004, 2005, 2006, 2007, 2008
# Free Software Foundation, Inc.
-timestamp='2009-08-19'
+timestamp='2009-04-27'
# This file is free software; you can redistribute it and/or modify it
# under the terms of the GNU General Public License as published by
@@ -27,16 +27,16 @@ timestamp='2009-08-19'
# the same distribution terms that you use for the rest of that program.
-# Originally written by Per Bothner. Please send patches (context
-# diff format) to <config-patches@gnu.org> and include a ChangeLog
-# entry.
+# Originally written by Per Bothner <per@bothner.com>.
+# Please send patches to <config-patches@gnu.org>. Submit a context
+# diff and a properly formatted ChangeLog entry.
#
# This script attempts to guess a canonical system name similar to
# config.sub. If it succeeds, it prints the system name on stdout, and
# exits with 0. Otherwise, it exits with 1.
#
-# You can get the latest version of this script from:
-# http://git.savannah.gnu.org/gitweb/?p=config.git;a=blob_plain;f=config.guess;hb=HEAD
+# The plan is that this can be called by configure scripts if you
+# don't specify an explicit build system type.
me=`echo "$0" | sed -e 's,.*/,,'`
@@ -170,7 +170,7 @@ case "${UNAME_MACHINE}:${UNAME_SYSTEM}:${UNAME_RELEASE}:${UNAME_VERSION}" in
arm*|i386|m68k|ns32k|sh3*|sparc|vax)
eval $set_cc_for_build
if echo __ELF__ | $CC_FOR_BUILD -E - 2>/dev/null \
- | grep -q __ELF__
+ | grep __ELF__ >/dev/null
then
# Once all utilities can be ECOFF (netbsdecoff) or a.out (netbsdaout).
# Return netbsd for either. FIX?
@@ -656,7 +656,7 @@ EOF
# => hppa64-hp-hpux11.23
if echo __LP64__ | (CCOPTS= $CC_FOR_BUILD -E - 2>/dev/null) |
- grep -q __LP64__
+ grep __LP64__ >/dev/null
then
HP_ARCH="hppa2.0w"
else
@@ -822,9 +822,6 @@ EOF
[345]86:Windows_95:* | [345]86:Windows_98:* | [345]86:Windows_NT:*)
echo i${UNAME_MACHINE}-pc-mks
exit ;;
- 8664:Windows_NT:*)
- echo x86_64-pc-mks
- exit ;;
i*:Windows_NT*:* | Pentium*:Windows_NT*:*)
# How do we know it's Interix rather than the generic POSIX subsystem?
# It also conflicts with pre-2.0 versions of AT&T UWIN. Should we
@@ -885,17 +882,40 @@ EOF
m68*:Linux:*:*)
echo ${UNAME_MACHINE}-unknown-linux-gnu
exit ;;
- mips:Linux:*:* | mips64:Linux:*:*)
+ mips:Linux:*:*)
eval $set_cc_for_build
sed 's/^ //' << EOF >$dummy.c
#undef CPU
- #undef ${UNAME_MACHINE}
- #undef ${UNAME_MACHINE}el
+ #undef mips
+ #undef mipsel
#if defined(__MIPSEL__) || defined(__MIPSEL) || defined(_MIPSEL) || defined(MIPSEL)
- CPU=${UNAME_MACHINE}el
+ CPU=mipsel
#else
#if defined(__MIPSEB__) || defined(__MIPSEB) || defined(_MIPSEB) || defined(MIPSEB)
- CPU=${UNAME_MACHINE}
+ CPU=mips
+ #else
+ CPU=
+ #endif
+ #endif
+EOF
+ eval "`$CC_FOR_BUILD -E $dummy.c 2>/dev/null | sed -n '
+ /^CPU/{
+ s: ::g
+ p
+ }'`"
+ test x"${CPU}" != x && { echo "${CPU}-unknown-linux-gnu"; exit; }
+ ;;
+ mips64:Linux:*:*)
+ eval $set_cc_for_build
+ sed 's/^ //' << EOF >$dummy.c
+ #undef CPU
+ #undef mips64
+ #undef mips64el
+ #if defined(__MIPSEL__) || defined(__MIPSEL) || defined(_MIPSEL) || defined(MIPSEL)
+ CPU=mips64el
+ #else
+ #if defined(__MIPSEB__) || defined(__MIPSEB) || defined(_MIPSEB) || defined(MIPSEB)
+ CPU=mips64
#else
CPU=
#endif
@@ -927,7 +947,7 @@ EOF
EV67) UNAME_MACHINE=alphaev67 ;;
EV68*) UNAME_MACHINE=alphaev68 ;;
esac
- objdump --private-headers /bin/sh | grep -q ld.so.1
+ objdump --private-headers /bin/sh | grep ld.so.1 >/dev/null
if test "$?" = 0 ; then LIBC="libc1" ; else LIBC="" ; fi
echo ${UNAME_MACHINE}-unknown-linux-gnu${LIBC}
exit ;;
@@ -981,6 +1001,14 @@ EOF
elf32-i386)
TENTATIVE="${UNAME_MACHINE}-pc-linux-gnu"
;;
+ a.out-i386-linux)
+ echo "${UNAME_MACHINE}-pc-linux-gnuaout"
+ exit ;;
+ "")
+ # Either a pre-BFD a.out linker (linux-gnuoldld) or
+ # one that does not give us useful --help.
+ echo "${UNAME_MACHINE}-pc-linux-gnuoldld"
+ exit ;;
esac
# Determine whether the default compiler is a.out or elf
eval $set_cc_for_build
@@ -1046,7 +1074,7 @@ EOF
i*86:syllable:*:*)
echo ${UNAME_MACHINE}-pc-syllable
exit ;;
- i*86:LynxOS:2.*:* | i*86:LynxOS:3.[01]*:* | i*86:LynxOS:4.[02]*:*)
+ i*86:LynxOS:2.*:* | i*86:LynxOS:3.[01]*:* | i*86:LynxOS:4.0*:*)
echo i386-unknown-lynxos${UNAME_RELEASE}
exit ;;
i*86:*DOS:*:*)
@@ -1154,7 +1182,7 @@ EOF
rs6000:LynxOS:2.*:*)
echo rs6000-unknown-lynxos${UNAME_RELEASE}
exit ;;
- PowerPC:LynxOS:2.*:* | PowerPC:LynxOS:3.[01]*:* | PowerPC:LynxOS:4.[02]*:*)
+ PowerPC:LynxOS:2.*:* | PowerPC:LynxOS:3.[01]*:* | PowerPC:LynxOS:4.0*:*)
echo powerpc-unknown-lynxos${UNAME_RELEASE}
exit ;;
SM[BE]S:UNIX_SV:*:*)
diff --git a/Build/source/utils/xz-4.999.8beta/config.rpath b/Build/source/utils/xz-4.999.9beta/build-aux/config.rpath
index c492a93b663..c492a93b663 100755
--- a/Build/source/utils/xz-4.999.8beta/config.rpath
+++ b/Build/source/utils/xz-4.999.9beta/build-aux/config.rpath
diff --git a/Build/source/utils/xz-4.999.8beta/config.sub b/Build/source/utils/xz-4.999.9beta/build-aux/config.sub
index 8ca084bf334..a39437d0158 100755
--- a/Build/source/utils/xz-4.999.8beta/config.sub
+++ b/Build/source/utils/xz-4.999.9beta/build-aux/config.sub
@@ -1,10 +1,10 @@
#! /bin/sh
# Configuration validation subroutine script.
# Copyright (C) 1992, 1993, 1994, 1995, 1996, 1997, 1998, 1999,
-# 2000, 2001, 2002, 2003, 2004, 2005, 2006, 2007, 2008, 2009
+# 2000, 2001, 2002, 2003, 2004, 2005, 2006, 2007, 2008
# Free Software Foundation, Inc.
-timestamp='2009-08-19'
+timestamp='2009-04-17'
# This file is (in principle) common to ALL GNU software.
# The presence of a machine in this file suggests that SOME GNU software
@@ -32,16 +32,13 @@ timestamp='2009-08-19'
# Please send patches to <config-patches@gnu.org>. Submit a context
-# diff and a properly formatted GNU ChangeLog entry.
+# diff and a properly formatted ChangeLog entry.
#
# Configuration subroutine to validate and canonicalize a configuration type.
# Supply the specified configuration type as an argument.
# If it is invalid, we print an error message on stderr and exit with code 1.
# Otherwise, we print the canonical config type on stdout and succeed.
-# You can get the latest version of this script from:
-# http://git.savannah.gnu.org/gitweb/?p=config.git;a=blob_plain;f=config.sub;hb=HEAD
-
# This file is supposed to be the same for all GNU packages
# and recognize all the CPU types, system types and aliases
# that are meaningful with *any* GNU software.
@@ -152,13 +149,10 @@ case $os in
-convergent* | -ncr* | -news | -32* | -3600* | -3100* | -hitachi* |\
-c[123]* | -convex* | -sun | -crds | -omron* | -dg | -ultra | -tti* | \
-harris | -dolphin | -highlevel | -gould | -cbm | -ns | -masscomp | \
- -apple | -axis | -knuth | -cray | -microblaze)
+ -apple | -axis | -knuth | -cray)
os=
basic_machine=$1
;;
- -bluegene*)
- os=-cnk
- ;;
-sim | -cisco | -oki | -wec | -winbond)
os=
basic_machine=$1
@@ -343,7 +337,7 @@ case $basic_machine in
| lm32-* \
| m32c-* | m32r-* | m32rle-* \
| m68000-* | m680[012346]0-* | m68360-* | m683?2-* | m68k-* \
- | m88110-* | m88k-* | maxq-* | mcore-* | metag-* | microblaze-* \
+ | m88110-* | m88k-* | maxq-* | mcore-* | metag-* \
| mips-* | mipsbe-* | mipseb-* | mipsel-* | mipsle-* \
| mips16-* \
| mips64-* | mips64el-* \
@@ -473,10 +467,6 @@ case $basic_machine in
basic_machine=bfin-`echo $basic_machine | sed 's/^[^-]*-//'`
os=-linux
;;
- bluegene*)
- basic_machine=powerpc-ibm
- os=-cnk
- ;;
c90)
basic_machine=c90-cray
os=-unicos
@@ -729,9 +719,6 @@ case $basic_machine in
basic_machine=ns32k-utek
os=-sysv
;;
- microblaze)
- basic_machine=microblaze-xilinx
- ;;
mingw32)
basic_machine=i386-pc
os=-mingw32
@@ -1273,7 +1260,7 @@ case $os in
# Each alternative MUST END IN A *, to match a version number.
# -sysv* is not here because it comes later, after sysvr4.
-gnu* | -bsd* | -mach* | -minix* | -genix* | -ultrix* | -irix* \
- | -*vms* | -sco* | -esix* | -isc* | -aix* | -cnk* | -sunos | -sunos[34]*\
+ | -*vms* | -sco* | -esix* | -isc* | -aix* | -sunos | -sunos[34]*\
| -hpux* | -unos* | -osf* | -luna* | -dgux* | -solaris* | -sym* \
| -kopensolaris* \
| -amigaos* | -amigados* | -msdos* | -newsos* | -unicos* | -aof* \
@@ -1626,7 +1613,7 @@ case $basic_machine in
-sunos*)
vendor=sun
;;
- -cnk*|-aix*)
+ -aix*)
vendor=ibm
;;
-beos*)
diff --git a/Build/source/utils/xz-4.999.8beta/depcomp b/Build/source/utils/xz-4.999.9beta/build-aux/depcomp
index df8eea7e4ce..df8eea7e4ce 100755
--- a/Build/source/utils/xz-4.999.8beta/depcomp
+++ b/Build/source/utils/xz-4.999.9beta/build-aux/depcomp
diff --git a/Build/source/utils/xz-4.999.8beta/install-sh b/Build/source/utils/xz-4.999.9beta/build-aux/install-sh
index 6781b987bdb..6781b987bdb 100755
--- a/Build/source/utils/xz-4.999.8beta/install-sh
+++ b/Build/source/utils/xz-4.999.9beta/build-aux/install-sh
diff --git a/Build/source/utils/xz-4.999.9beta/build-aux/ltmain.sh b/Build/source/utils/xz-4.999.9beta/build-aux/ltmain.sh
new file mode 100755
index 00000000000..b36c4ad366c
--- /dev/null
+++ b/Build/source/utils/xz-4.999.9beta/build-aux/ltmain.sh
@@ -0,0 +1,8406 @@
+# Generated from ltmain.m4sh.
+
+# ltmain.sh (GNU libtool) 2.2.6
+# Written by Gordon Matzigkeit <gord@gnu.ai.mit.edu>, 1996
+
+# Copyright (C) 1996, 1997, 1998, 1999, 2000, 2001, 2003, 2004, 2005, 2006, 2007 2008 Free Software Foundation, Inc.
+# This is free software; see the source for copying conditions. There is NO
+# warranty; not even for MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.
+
+# GNU Libtool is free software; you can redistribute it and/or modify
+# it under the terms of the GNU General Public License as published by
+# the Free Software Foundation; either version 2 of the License, or
+# (at your option) any later version.
+#
+# As a special exception to the GNU General Public License,
+# if you distribute this file as part of a program or library that
+# is built using GNU Libtool, you may include this file under the
+# same distribution terms that you use for the rest of that program.
+#
+# GNU Libtool is distributed in the hope that it will be useful, but
+# WITHOUT ANY WARRANTY; without even the implied warranty of
+# MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the GNU
+# General Public License for more details.
+#
+# You should have received a copy of the GNU General Public License
+# along with GNU Libtool; see the file COPYING. If not, a copy
+# can be downloaded from http://www.gnu.org/licenses/gpl.html,
+# or obtained by writing to the Free Software Foundation, Inc.,
+# 51 Franklin Street, Fifth Floor, Boston, MA 02110-1301, USA.
+
+# Usage: $progname [OPTION]... [MODE-ARG]...
+#
+# Provide generalized library-building support services.
+#
+# --config show all configuration variables
+# --debug enable verbose shell tracing
+# -n, --dry-run display commands without modifying any files
+# --features display basic configuration information and exit
+# --mode=MODE use operation mode MODE
+# --preserve-dup-deps don't remove duplicate dependency libraries
+# --quiet, --silent don't print informational messages
+# --tag=TAG use configuration variables from tag TAG
+# -v, --verbose print informational messages (default)
+# --version print version information
+# -h, --help print short or long help message
+#
+# MODE must be one of the following:
+#
+# clean remove files from the build directory
+# compile compile a source file into a libtool object
+# execute automatically set library path, then run a program
+# finish complete the installation of libtool libraries
+# install install libraries or executables
+# link create a library or an executable
+# uninstall remove libraries from an installed directory
+#
+# MODE-ARGS vary depending on the MODE.
+# Try `$progname --help --mode=MODE' for a more detailed description of MODE.
+#
+# When reporting a bug, please describe a test case to reproduce it and
+# include the following information:
+#
+# host-triplet: $host
+# shell: $SHELL
+# compiler: $LTCC
+# compiler flags: $LTCFLAGS
+# linker: $LD (gnu? $with_gnu_ld)
+# $progname: (GNU libtool) 2.2.6
+# automake: $automake_version
+# autoconf: $autoconf_version
+#
+# Report bugs to <bug-libtool@gnu.org>.
+
+PROGRAM=ltmain.sh
+PACKAGE=libtool
+VERSION=2.2.6
+TIMESTAMP=""
+package_revision=1.3012
+
+# Be Bourne compatible
+if test -n "${ZSH_VERSION+set}" && (emulate sh) >/dev/null 2>&1; then
+ emulate sh
+ NULLCMD=:
+ # Zsh 3.x and 4.x performs word splitting on ${1+"$@"}, which
+ # is contrary to our usage. Disable this feature.
+ alias -g '${1+"$@"}'='"$@"'
+ setopt NO_GLOB_SUBST
+else
+ case `(set -o) 2>/dev/null` in *posix*) set -o posix;; esac
+fi
+BIN_SH=xpg4; export BIN_SH # for Tru64
+DUALCASE=1; export DUALCASE # for MKS sh
+
+# NLS nuisances: We save the old values to restore during execute mode.
+# Only set LANG and LC_ALL to C if already set.
+# These must not be set unconditionally because not all systems understand
+# e.g. LANG=C (notably SCO).
+lt_user_locale=
+lt_safe_locale=
+for lt_var in LANG LANGUAGE LC_ALL LC_CTYPE LC_COLLATE LC_MESSAGES
+do
+ eval "if test \"\${$lt_var+set}\" = set; then
+ save_$lt_var=\$$lt_var
+ $lt_var=C
+ export $lt_var
+ lt_user_locale=\"$lt_var=\\\$save_\$lt_var; \$lt_user_locale\"
+ lt_safe_locale=\"$lt_var=C; \$lt_safe_locale\"
+ fi"
+done
+
+$lt_unset CDPATH
+
+
+
+
+
+: ${CP="cp -f"}
+: ${ECHO="echo"}
+: ${EGREP="/usr/bin/grep -E"}
+: ${FGREP="/usr/bin/grep -F"}
+: ${GREP="/usr/bin/grep"}
+: ${LN_S="ln -s"}
+: ${MAKE="make"}
+: ${MKDIR="mkdir"}
+: ${MV="mv -f"}
+: ${RM="rm -f"}
+: ${SED="/opt/local/bin/gsed"}
+: ${SHELL="${CONFIG_SHELL-/bin/sh}"}
+: ${Xsed="$SED -e 1s/^X//"}
+
+# Global variables:
+EXIT_SUCCESS=0
+EXIT_FAILURE=1
+EXIT_MISMATCH=63 # $? = 63 is used to indicate version mismatch to missing.
+EXIT_SKIP=77 # $? = 77 is used to indicate a skipped test to automake.
+
+exit_status=$EXIT_SUCCESS
+
+# Make sure IFS has a sensible default
+lt_nl='
+'
+IFS=" $lt_nl"
+
+dirname="s,/[^/]*$,,"
+basename="s,^.*/,,"
+
+# func_dirname_and_basename file append nondir_replacement
+# perform func_basename and func_dirname in a single function
+# call:
+# dirname: Compute the dirname of FILE. If nonempty,
+# add APPEND to the result, otherwise set result
+# to NONDIR_REPLACEMENT.
+# value returned in "$func_dirname_result"
+# basename: Compute filename of FILE.
+# value retuned in "$func_basename_result"
+# Implementation must be kept synchronized with func_dirname
+# and func_basename. For efficiency, we do not delegate to
+# those functions but instead duplicate the functionality here.
+func_dirname_and_basename ()
+{
+ # Extract subdirectory from the argument.
+ func_dirname_result=`$ECHO "X${1}" | $Xsed -e "$dirname"`
+ if test "X$func_dirname_result" = "X${1}"; then
+ func_dirname_result="${3}"
+ else
+ func_dirname_result="$func_dirname_result${2}"
+ fi
+ func_basename_result=`$ECHO "X${1}" | $Xsed -e "$basename"`
+}
+
+# Generated shell functions inserted here.
+
+# Work around backward compatibility issue on IRIX 6.5. On IRIX 6.4+, sh
+# is ksh but when the shell is invoked as "sh" and the current value of
+# the _XPG environment variable is not equal to 1 (one), the special
+# positional parameter $0, within a function call, is the name of the
+# function.
+progpath="$0"
+
+# The name of this program:
+# In the unlikely event $progname began with a '-', it would play havoc with
+# func_echo (imagine progname=-n), so we prepend ./ in that case:
+func_dirname_and_basename "$progpath"
+progname=$func_basename_result
+case $progname in
+ -*) progname=./$progname ;;
+esac
+
+# Make sure we have an absolute path for reexecution:
+case $progpath in
+ [\\/]*|[A-Za-z]:\\*) ;;
+ *[\\/]*)
+ progdir=$func_dirname_result
+ progdir=`cd "$progdir" && pwd`
+ progpath="$progdir/$progname"
+ ;;
+ *)
+ save_IFS="$IFS"
+ IFS=:
+ for progdir in $PATH; do
+ IFS="$save_IFS"
+ test -x "$progdir/$progname" && break
+ done
+ IFS="$save_IFS"
+ test -n "$progdir" || progdir=`pwd`
+ progpath="$progdir/$progname"
+ ;;
+esac
+
+# Sed substitution that helps us do robust quoting. It backslashifies
+# metacharacters that are still active within double-quoted strings.
+Xsed="${SED}"' -e 1s/^X//'
+sed_quote_subst='s/\([`"$\\]\)/\\\1/g'
+
+# Same as above, but do not quote variable references.
+double_quote_subst='s/\(["`\\]\)/\\\1/g'
+
+# Re-`\' parameter expansions in output of double_quote_subst that were
+# `\'-ed in input to the same. If an odd number of `\' preceded a '$'
+# in input to double_quote_subst, that '$' was protected from expansion.
+# Since each input `\' is now two `\'s, look for any number of runs of
+# four `\'s followed by two `\'s and then a '$'. `\' that '$'.
+bs='\\'
+bs2='\\\\'
+bs4='\\\\\\\\'
+dollar='\$'
+sed_double_backslash="\
+ s/$bs4/&\\
+/g
+ s/^$bs2$dollar/$bs&/
+ s/\\([^$bs]\\)$bs2$dollar/\\1$bs2$bs$dollar/g
+ s/\n//g"
+
+# Standard options:
+opt_dry_run=false
+opt_help=false
+opt_quiet=false
+opt_verbose=false
+opt_warning=:
+
+# func_echo arg...
+# Echo program name prefixed message, along with the current mode
+# name if it has been set yet.
+func_echo ()
+{
+ $ECHO "$progname${mode+: }$mode: $*"
+}
+
+# func_verbose arg...
+# Echo program name prefixed message in verbose mode only.
+func_verbose ()
+{
+ $opt_verbose && func_echo ${1+"$@"}
+
+ # A bug in bash halts the script if the last line of a function
+ # fails when set -e is in force, so we need another command to
+ # work around that:
+ :
+}
+
+# func_error arg...
+# Echo program name prefixed message to standard error.
+func_error ()
+{
+ $ECHO "$progname${mode+: }$mode: "${1+"$@"} 1>&2
+}
+
+# func_warning arg...
+# Echo program name prefixed warning message to standard error.
+func_warning ()
+{
+ $opt_warning && $ECHO "$progname${mode+: }$mode: warning: "${1+"$@"} 1>&2
+
+ # bash bug again:
+ :
+}
+
+# func_fatal_error arg...
+# Echo program name prefixed message to standard error, and exit.
+func_fatal_error ()
+{
+ func_error ${1+"$@"}
+ exit $EXIT_FAILURE
+}
+
+# func_fatal_help arg...
+# Echo program name prefixed message to standard error, followed by
+# a help hint, and exit.
+func_fatal_help ()
+{
+ func_error ${1+"$@"}
+ func_fatal_error "$help"
+}
+help="Try \`$progname --help' for more information." ## default
+
+
+# func_grep expression filename
+# Check whether EXPRESSION matches any line of FILENAME, without output.
+func_grep ()
+{
+ $GREP "$1" "$2" >/dev/null 2>&1
+}
+
+
+# func_mkdir_p directory-path
+# Make sure the entire path to DIRECTORY-PATH is available.
+func_mkdir_p ()
+{
+ my_directory_path="$1"
+ my_dir_list=
+
+ if test -n "$my_directory_path" && test "$opt_dry_run" != ":"; then
+
+ # Protect directory names starting with `-'
+ case $my_directory_path in
+ -*) my_directory_path="./$my_directory_path" ;;
+ esac
+
+ # While some portion of DIR does not yet exist...
+ while test ! -d "$my_directory_path"; do
+ # ...make a list in topmost first order. Use a colon delimited
+ # list incase some portion of path contains whitespace.
+ my_dir_list="$my_directory_path:$my_dir_list"
+
+ # If the last portion added has no slash in it, the list is done
+ case $my_directory_path in */*) ;; *) break ;; esac
+
+ # ...otherwise throw away the child directory and loop
+ my_directory_path=`$ECHO "X$my_directory_path" | $Xsed -e "$dirname"`
+ done
+ my_dir_list=`$ECHO "X$my_dir_list" | $Xsed -e 's,:*$,,'`
+
+ save_mkdir_p_IFS="$IFS"; IFS=':'
+ for my_dir in $my_dir_list; do
+ IFS="$save_mkdir_p_IFS"
+ # mkdir can fail with a `File exist' error if two processes
+ # try to create one of the directories concurrently. Don't
+ # stop in that case!
+ $MKDIR "$my_dir" 2>/dev/null || :
+ done
+ IFS="$save_mkdir_p_IFS"
+
+ # Bail out if we (or some other process) failed to create a directory.
+ test -d "$my_directory_path" || \
+ func_fatal_error "Failed to create \`$1'"
+ fi
+}
+
+
+# func_mktempdir [string]
+# Make a temporary directory that won't clash with other running
+# libtool processes, and avoids race conditions if possible. If
+# given, STRING is the basename for that directory.
+func_mktempdir ()
+{
+ my_template="${TMPDIR-/tmp}/${1-$progname}"
+
+ if test "$opt_dry_run" = ":"; then
+ # Return a directory name, but don't create it in dry-run mode
+ my_tmpdir="${my_template}-$$"
+ else
+
+ # If mktemp works, use that first and foremost
+ my_tmpdir=`mktemp -d "${my_template}-XXXXXXXX" 2>/dev/null`
+
+ if test ! -d "$my_tmpdir"; then
+ # Failing that, at least try and use $RANDOM to avoid a race
+ my_tmpdir="${my_template}-${RANDOM-0}$$"
+
+ save_mktempdir_umask=`umask`
+ umask 0077
+ $MKDIR "$my_tmpdir"
+ umask $save_mktempdir_umask
+ fi
+
+ # If we're not in dry-run mode, bomb out on failure
+ test -d "$my_tmpdir" || \
+ func_fatal_error "cannot create temporary directory \`$my_tmpdir'"
+ fi
+
+ $ECHO "X$my_tmpdir" | $Xsed
+}
+
+
+# func_quote_for_eval arg
+# Aesthetically quote ARG to be evaled later.
+# This function returns two values: FUNC_QUOTE_FOR_EVAL_RESULT
+# is double-quoted, suitable for a subsequent eval, whereas
+# FUNC_QUOTE_FOR_EVAL_UNQUOTED_RESULT has merely all characters
+# which are still active within double quotes backslashified.
+func_quote_for_eval ()
+{
+ case $1 in
+ *[\\\`\"\$]*)
+ func_quote_for_eval_unquoted_result=`$ECHO "X$1" | $Xsed -e "$sed_quote_subst"` ;;
+ *)
+ func_quote_for_eval_unquoted_result="$1" ;;
+ esac
+
+ case $func_quote_for_eval_unquoted_result in
+ # Double-quote args containing shell metacharacters to delay
+ # word splitting, command substitution and and variable
+ # expansion for a subsequent eval.
+ # Many Bourne shells cannot handle close brackets correctly
+ # in scan sets, so we specify it separately.
+ *[\[\~\#\^\&\*\(\)\{\}\|\;\<\>\?\'\ \ ]*|*]*|"")
+ func_quote_for_eval_result="\"$func_quote_for_eval_unquoted_result\""
+ ;;
+ *)
+ func_quote_for_eval_result="$func_quote_for_eval_unquoted_result"
+ esac
+}
+
+
+# func_quote_for_expand arg
+# Aesthetically quote ARG to be evaled later; same as above,
+# but do not quote variable references.
+func_quote_for_expand ()
+{
+ case $1 in
+ *[\\\`\"]*)
+ my_arg=`$ECHO "X$1" | $Xsed \
+ -e "$double_quote_subst" -e "$sed_double_backslash"` ;;
+ *)
+ my_arg="$1" ;;
+ esac
+
+ case $my_arg in
+ # Double-quote args containing shell metacharacters to delay
+ # word splitting and command substitution for a subsequent eval.
+ # Many Bourne shells cannot handle close brackets correctly
+ # in scan sets, so we specify it separately.
+ *[\[\~\#\^\&\*\(\)\{\}\|\;\<\>\?\'\ \ ]*|*]*|"")
+ my_arg="\"$my_arg\""
+ ;;
+ esac
+
+ func_quote_for_expand_result="$my_arg"
+}
+
+
+# func_show_eval cmd [fail_exp]
+# Unless opt_silent is true, then output CMD. Then, if opt_dryrun is
+# not true, evaluate CMD. If the evaluation of CMD fails, and FAIL_EXP
+# is given, then evaluate it.
+func_show_eval ()
+{
+ my_cmd="$1"
+ my_fail_exp="${2-:}"
+
+ ${opt_silent-false} || {
+ func_quote_for_expand "$my_cmd"
+ eval "func_echo $func_quote_for_expand_result"
+ }
+
+ if ${opt_dry_run-false}; then :; else
+ eval "$my_cmd"
+ my_status=$?
+ if test "$my_status" -eq 0; then :; else
+ eval "(exit $my_status); $my_fail_exp"
+ fi
+ fi
+}
+
+
+# func_show_eval_locale cmd [fail_exp]
+# Unless opt_silent is true, then output CMD. Then, if opt_dryrun is
+# not true, evaluate CMD. If the evaluation of CMD fails, and FAIL_EXP
+# is given, then evaluate it. Use the saved locale for evaluation.
+func_show_eval_locale ()
+{
+ my_cmd="$1"
+ my_fail_exp="${2-:}"
+
+ ${opt_silent-false} || {
+ func_quote_for_expand "$my_cmd"
+ eval "func_echo $func_quote_for_expand_result"
+ }
+
+ if ${opt_dry_run-false}; then :; else
+ eval "$lt_user_locale
+ $my_cmd"
+ my_status=$?
+ eval "$lt_safe_locale"
+ if test "$my_status" -eq 0; then :; else
+ eval "(exit $my_status); $my_fail_exp"
+ fi
+ fi
+}
+
+
+
+
+
+# func_version
+# Echo version message to standard output and exit.
+func_version ()
+{
+ $SED -n '/^# '$PROGRAM' (GNU /,/# warranty; / {
+ s/^# //
+ s/^# *$//
+ s/\((C)\)[ 0-9,-]*\( [1-9][0-9]*\)/\1\2/
+ p
+ }' < "$progpath"
+ exit $?
+}
+
+# func_usage
+# Echo short help message to standard output and exit.
+func_usage ()
+{
+ $SED -n '/^# Usage:/,/# -h/ {
+ s/^# //
+ s/^# *$//
+ s/\$progname/'$progname'/
+ p
+ }' < "$progpath"
+ $ECHO
+ $ECHO "run \`$progname --help | more' for full usage"
+ exit $?
+}
+
+# func_help
+# Echo long help message to standard output and exit.
+func_help ()
+{
+ $SED -n '/^# Usage:/,/# Report bugs to/ {
+ s/^# //
+ s/^# *$//
+ s*\$progname*'$progname'*
+ s*\$host*'"$host"'*
+ s*\$SHELL*'"$SHELL"'*
+ s*\$LTCC*'"$LTCC"'*
+ s*\$LTCFLAGS*'"$LTCFLAGS"'*
+ s*\$LD*'"$LD"'*
+ s/\$with_gnu_ld/'"$with_gnu_ld"'/
+ s/\$automake_version/'"`(automake --version) 2>/dev/null |$SED 1q`"'/
+ s/\$autoconf_version/'"`(autoconf --version) 2>/dev/null |$SED 1q`"'/
+ p
+ }' < "$progpath"
+ exit $?
+}
+
+# func_missing_arg argname
+# Echo program name prefixed message to standard error and set global
+# exit_cmd.
+func_missing_arg ()
+{
+ func_error "missing argument for $1"
+ exit_cmd=exit
+}
+
+exit_cmd=:
+
+
+
+
+
+# Check that we have a working $ECHO.
+if test "X$1" = X--no-reexec; then
+ # Discard the --no-reexec flag, and continue.
+ shift
+elif test "X$1" = X--fallback-echo; then
+ # Avoid inline document here, it may be left over
+ :
+elif test "X`{ $ECHO '\t'; } 2>/dev/null`" = 'X\t'; then
+ # Yippee, $ECHO works!
+ :
+else
+ # Restart under the correct shell, and then maybe $ECHO will work.
+ exec $SHELL "$progpath" --no-reexec ${1+"$@"}
+fi
+
+if test "X$1" = X--fallback-echo; then
+ # used as fallback echo
+ shift
+ cat <<EOF
+$*
+EOF
+ exit $EXIT_SUCCESS
+fi
+
+magic="%%%MAGIC variable%%%"
+magic_exe="%%%MAGIC EXE variable%%%"
+
+# Global variables.
+# $mode is unset
+nonopt=
+execute_dlfiles=
+preserve_args=
+lo2o="s/\\.lo\$/.${objext}/"
+o2lo="s/\\.${objext}\$/.lo/"
+extracted_archives=
+extracted_serial=0
+
+opt_dry_run=false
+opt_duplicate_deps=false
+opt_silent=false
+opt_debug=:
+
+# If this variable is set in any of the actions, the command in it
+# will be execed at the end. This prevents here-documents from being
+# left over by shells.
+exec_cmd=
+
+# func_fatal_configuration arg...
+# Echo program name prefixed message to standard error, followed by
+# a configuration failure hint, and exit.
+func_fatal_configuration ()
+{
+ func_error ${1+"$@"}
+ func_error "See the $PACKAGE documentation for more information."
+ func_fatal_error "Fatal configuration error."
+}
+
+
+# func_config
+# Display the configuration for all the tags in this script.
+func_config ()
+{
+ re_begincf='^# ### BEGIN LIBTOOL'
+ re_endcf='^# ### END LIBTOOL'
+
+ # Default configuration.
+ $SED "1,/$re_begincf CONFIG/d;/$re_endcf CONFIG/,\$d" < "$progpath"
+
+ # Now print the configurations for the tags.
+ for tagname in $taglist; do
+ $SED -n "/$re_begincf TAG CONFIG: $tagname\$/,/$re_endcf TAG CONFIG: $tagname\$/p" < "$progpath"
+ done
+
+ exit $?
+}
+
+# func_features
+# Display the features supported by this script.
+func_features ()
+{
+ $ECHO "host: $host"
+ if test "$build_libtool_libs" = yes; then
+ $ECHO "enable shared libraries"
+ else
+ $ECHO "disable shared libraries"
+ fi
+ if test "$build_old_libs" = yes; then
+ $ECHO "enable static libraries"
+ else
+ $ECHO "disable static libraries"
+ fi
+
+ exit $?
+}
+
+# func_enable_tag tagname
+# Verify that TAGNAME is valid, and either flag an error and exit, or
+# enable the TAGNAME tag. We also add TAGNAME to the global $taglist
+# variable here.
+func_enable_tag ()
+{
+ # Global variable:
+ tagname="$1"
+
+ re_begincf="^# ### BEGIN LIBTOOL TAG CONFIG: $tagname\$"
+ re_endcf="^# ### END LIBTOOL TAG CONFIG: $tagname\$"
+ sed_extractcf="/$re_begincf/,/$re_endcf/p"
+
+ # Validate tagname.
+ case $tagname in
+ *[!-_A-Za-z0-9,/]*)
+ func_fatal_error "invalid tag name: $tagname"
+ ;;
+ esac
+
+ # Don't test for the "default" C tag, as we know it's
+ # there but not specially marked.
+ case $tagname in
+ CC) ;;
+ *)
+ if $GREP "$re_begincf" "$progpath" >/dev/null 2>&1; then
+ taglist="$taglist $tagname"
+
+ # Evaluate the configuration. Be careful to quote the path
+ # and the sed script, to avoid splitting on whitespace, but
+ # also don't use non-portable quotes within backquotes within
+ # quotes we have to do it in 2 steps:
+ extractedcf=`$SED -n -e "$sed_extractcf" < "$progpath"`
+ eval "$extractedcf"
+ else
+ func_error "ignoring unknown tag $tagname"
+ fi
+ ;;
+ esac
+}
+
+# Parse options once, thoroughly. This comes as soon as possible in
+# the script to make things like `libtool --version' happen quickly.
+{
+
+ # Shorthand for --mode=foo, only valid as the first argument
+ case $1 in
+ clean|clea|cle|cl)
+ shift; set dummy --mode clean ${1+"$@"}; shift
+ ;;
+ compile|compil|compi|comp|com|co|c)
+ shift; set dummy --mode compile ${1+"$@"}; shift
+ ;;
+ execute|execut|execu|exec|exe|ex|e)
+ shift; set dummy --mode execute ${1+"$@"}; shift
+ ;;
+ finish|finis|fini|fin|fi|f)
+ shift; set dummy --mode finish ${1+"$@"}; shift
+ ;;
+ install|instal|insta|inst|ins|in|i)
+ shift; set dummy --mode install ${1+"$@"}; shift
+ ;;
+ link|lin|li|l)
+ shift; set dummy --mode link ${1+"$@"}; shift
+ ;;
+ uninstall|uninstal|uninsta|uninst|unins|unin|uni|un|u)
+ shift; set dummy --mode uninstall ${1+"$@"}; shift
+ ;;
+ esac
+
+ # Parse non-mode specific arguments:
+ while test "$#" -gt 0; do
+ opt="$1"
+ shift
+
+ case $opt in
+ --config) func_config ;;
+
+ --debug) preserve_args="$preserve_args $opt"
+ func_echo "enabling shell trace mode"
+ opt_debug='set -x'
+ $opt_debug
+ ;;
+
+ -dlopen) test "$#" -eq 0 && func_missing_arg "$opt" && break
+ execute_dlfiles="$execute_dlfiles $1"
+ shift
+ ;;
+
+ --dry-run | -n) opt_dry_run=: ;;
+ --features) func_features ;;
+ --finish) mode="finish" ;;
+
+ --mode) test "$#" -eq 0 && func_missing_arg "$opt" && break
+ case $1 in
+ # Valid mode arguments:
+ clean) ;;
+ compile) ;;
+ execute) ;;
+ finish) ;;
+ install) ;;
+ link) ;;
+ relink) ;;
+ uninstall) ;;
+
+ # Catch anything else as an error
+ *) func_error "invalid argument for $opt"
+ exit_cmd=exit
+ break
+ ;;
+ esac
+
+ mode="$1"
+ shift
+ ;;
+
+ --preserve-dup-deps)
+ opt_duplicate_deps=: ;;
+
+ --quiet|--silent) preserve_args="$preserve_args $opt"
+ opt_silent=:
+ ;;
+
+ --verbose| -v) preserve_args="$preserve_args $opt"
+ opt_silent=false
+ ;;
+
+ --tag) test "$#" -eq 0 && func_missing_arg "$opt" && break
+ preserve_args="$preserve_args $opt $1"
+ func_enable_tag "$1" # tagname is set here
+ shift
+ ;;
+
+ # Separate optargs to long options:
+ -dlopen=*|--mode=*|--tag=*)
+ func_opt_split "$opt"
+ set dummy "$func_opt_split_opt" "$func_opt_split_arg" ${1+"$@"}
+ shift
+ ;;
+
+ -\?|-h) func_usage ;;
+ --help) opt_help=: ;;
+ --version) func_version ;;
+
+ -*) func_fatal_help "unrecognized option \`$opt'" ;;
+
+ *) nonopt="$opt"
+ break
+ ;;
+ esac
+ done
+
+
+ case $host in
+ *cygwin* | *mingw* | *pw32* | *cegcc*)
+ # don't eliminate duplications in $postdeps and $predeps
+ opt_duplicate_compiler_generated_deps=:
+ ;;
+ *)
+ opt_duplicate_compiler_generated_deps=$opt_duplicate_deps
+ ;;
+ esac
+
+ # Having warned about all mis-specified options, bail out if
+ # anything was wrong.
+ $exit_cmd $EXIT_FAILURE
+}
+
+# func_check_version_match
+# Ensure that we are using m4 macros, and libtool script from the same
+# release of libtool.
+func_check_version_match ()
+{
+ if test "$package_revision" != "$macro_revision"; then
+ if test "$VERSION" != "$macro_version"; then
+ if test -z "$macro_version"; then
+ cat >&2 <<_LT_EOF
+$progname: Version mismatch error. This is $PACKAGE $VERSION, but the
+$progname: definition of this LT_INIT comes from an older release.
+$progname: You should recreate aclocal.m4 with macros from $PACKAGE $VERSION
+$progname: and run autoconf again.
+_LT_EOF
+ else
+ cat >&2 <<_LT_EOF
+$progname: Version mismatch error. This is $PACKAGE $VERSION, but the
+$progname: definition of this LT_INIT comes from $PACKAGE $macro_version.
+$progname: You should recreate aclocal.m4 with macros from $PACKAGE $VERSION
+$progname: and run autoconf again.
+_LT_EOF
+ fi
+ else
+ cat >&2 <<_LT_EOF
+$progname: Version mismatch error. This is $PACKAGE $VERSION, revision $package_revision,
+$progname: but the definition of this LT_INIT comes from revision $macro_revision.
+$progname: You should recreate aclocal.m4 with macros from revision $package_revision
+$progname: of $PACKAGE $VERSION and run autoconf again.
+_LT_EOF
+ fi
+
+ exit $EXIT_MISMATCH
+ fi
+}
+
+
+## ----------- ##
+## Main. ##
+## ----------- ##
+
+$opt_help || {
+ # Sanity checks first:
+ func_check_version_match
+
+ if test "$build_libtool_libs" != yes && test "$build_old_libs" != yes; then
+ func_fatal_configuration "not configured to build any kind of library"
+ fi
+
+ test -z "$mode" && func_fatal_error "error: you must specify a MODE."
+
+
+ # Darwin sucks
+ eval std_shrext=\"$shrext_cmds\"
+
+
+ # Only execute mode is allowed to have -dlopen flags.
+ if test -n "$execute_dlfiles" && test "$mode" != execute; then
+ func_error "unrecognized option \`-dlopen'"
+ $ECHO "$help" 1>&2
+ exit $EXIT_FAILURE
+ fi
+
+ # Change the help message to a mode-specific one.
+ generic_help="$help"
+ help="Try \`$progname --help --mode=$mode' for more information."
+}
+
+
+# func_lalib_p file
+# True iff FILE is a libtool `.la' library or `.lo' object file.
+# This function is only a basic sanity check; it will hardly flush out
+# determined imposters.
+func_lalib_p ()
+{
+ test -f "$1" &&
+ $SED -e 4q "$1" 2>/dev/null \
+ | $GREP "^# Generated by .*$PACKAGE" > /dev/null 2>&1
+}
+
+# func_lalib_unsafe_p file
+# True iff FILE is a libtool `.la' library or `.lo' object file.
+# This function implements the same check as func_lalib_p without
+# resorting to external programs. To this end, it redirects stdin and
+# closes it afterwards, without saving the original file descriptor.
+# As a safety measure, use it only where a negative result would be
+# fatal anyway. Works if `file' does not exist.
+func_lalib_unsafe_p ()
+{
+ lalib_p=no
+ if test -f "$1" && test -r "$1" && exec 5<&0 <"$1"; then
+ for lalib_p_l in 1 2 3 4
+ do
+ read lalib_p_line
+ case "$lalib_p_line" in
+ \#\ Generated\ by\ *$PACKAGE* ) lalib_p=yes; break;;
+ esac
+ done
+ exec 0<&5 5<&-
+ fi
+ test "$lalib_p" = yes
+}
+
+# func_ltwrapper_script_p file
+# True iff FILE is a libtool wrapper script
+# This function is only a basic sanity check; it will hardly flush out
+# determined imposters.
+func_ltwrapper_script_p ()
+{
+ func_lalib_p "$1"
+}
+
+# func_ltwrapper_executable_p file
+# True iff FILE is a libtool wrapper executable
+# This function is only a basic sanity check; it will hardly flush out
+# determined imposters.
+func_ltwrapper_executable_p ()
+{
+ func_ltwrapper_exec_suffix=
+ case $1 in
+ *.exe) ;;
+ *) func_ltwrapper_exec_suffix=.exe ;;
+ esac
+ $GREP "$magic_exe" "$1$func_ltwrapper_exec_suffix" >/dev/null 2>&1
+}
+
+# func_ltwrapper_scriptname file
+# Assumes file is an ltwrapper_executable
+# uses $file to determine the appropriate filename for a
+# temporary ltwrapper_script.
+func_ltwrapper_scriptname ()
+{
+ func_ltwrapper_scriptname_result=""
+ if func_ltwrapper_executable_p "$1"; then
+ func_dirname_and_basename "$1" "" "."
+ func_stripname '' '.exe' "$func_basename_result"
+ func_ltwrapper_scriptname_result="$func_dirname_result/$objdir/${func_stripname_result}_ltshwrapper"
+ fi
+}
+
+# func_ltwrapper_p file
+# True iff FILE is a libtool wrapper script or wrapper executable
+# This function is only a basic sanity check; it will hardly flush out
+# determined imposters.
+func_ltwrapper_p ()
+{
+ func_ltwrapper_script_p "$1" || func_ltwrapper_executable_p "$1"
+}
+
+
+# func_execute_cmds commands fail_cmd
+# Execute tilde-delimited COMMANDS.
+# If FAIL_CMD is given, eval that upon failure.
+# FAIL_CMD may read-access the current command in variable CMD!
+func_execute_cmds ()
+{
+ $opt_debug
+ save_ifs=$IFS; IFS='~'
+ for cmd in $1; do
+ IFS=$save_ifs
+ eval cmd=\"$cmd\"
+ func_show_eval "$cmd" "${2-:}"
+ done
+ IFS=$save_ifs
+}
+
+
+# func_source file
+# Source FILE, adding directory component if necessary.
+# Note that it is not necessary on cygwin/mingw to append a dot to
+# FILE even if both FILE and FILE.exe exist: automatic-append-.exe
+# behavior happens only for exec(3), not for open(2)! Also, sourcing
+# `FILE.' does not work on cygwin managed mounts.
+func_source ()
+{
+ $opt_debug
+ case $1 in
+ */* | *\\*) . "$1" ;;
+ *) . "./$1" ;;
+ esac
+}
+
+
+# func_infer_tag arg
+# Infer tagged configuration to use if any are available and
+# if one wasn't chosen via the "--tag" command line option.
+# Only attempt this if the compiler in the base compile
+# command doesn't match the default compiler.
+# arg is usually of the form 'gcc ...'
+func_infer_tag ()
+{
+ $opt_debug
+ if test -n "$available_tags" && test -z "$tagname"; then
+ CC_quoted=
+ for arg in $CC; do
+ func_quote_for_eval "$arg"
+ CC_quoted="$CC_quoted $func_quote_for_eval_result"
+ done
+ case $@ in
+ # Blanks in the command may have been stripped by the calling shell,
+ # but not from the CC environment variable when configure was run.
+ " $CC "* | "$CC "* | " `$ECHO $CC` "* | "`$ECHO $CC` "* | " $CC_quoted"* | "$CC_quoted "* | " `$ECHO $CC_quoted` "* | "`$ECHO $CC_quoted` "*) ;;
+ # Blanks at the start of $base_compile will cause this to fail
+ # if we don't check for them as well.
+ *)
+ for z in $available_tags; do
+ if $GREP "^# ### BEGIN LIBTOOL TAG CONFIG: $z$" < "$progpath" > /dev/null; then
+ # Evaluate the configuration.
+ eval "`${SED} -n -e '/^# ### BEGIN LIBTOOL TAG CONFIG: '$z'$/,/^# ### END LIBTOOL TAG CONFIG: '$z'$/p' < $progpath`"
+ CC_quoted=
+ for arg in $CC; do
+ # Double-quote args containing other shell metacharacters.
+ func_quote_for_eval "$arg"
+ CC_quoted="$CC_quoted $func_quote_for_eval_result"
+ done
+ case "$@ " in
+ " $CC "* | "$CC "* | " `$ECHO $CC` "* | "`$ECHO $CC` "* | " $CC_quoted"* | "$CC_quoted "* | " `$ECHO $CC_quoted` "* | "`$ECHO $CC_quoted` "*)
+ # The compiler in the base compile command matches
+ # the one in the tagged configuration.
+ # Assume this is the tagged configuration we want.
+ tagname=$z
+ break
+ ;;
+ esac
+ fi
+ done
+ # If $tagname still isn't set, then no tagged configuration
+ # was found and let the user know that the "--tag" command
+ # line option must be used.
+ if test -z "$tagname"; then
+ func_echo "unable to infer tagged configuration"
+ func_fatal_error "specify a tag with \`--tag'"
+# else
+# func_verbose "using $tagname tagged configuration"
+ fi
+ ;;
+ esac
+ fi
+}
+
+
+
+# func_write_libtool_object output_name pic_name nonpic_name
+# Create a libtool object file (analogous to a ".la" file),
+# but don't create it if we're doing a dry run.
+func_write_libtool_object ()
+{
+ write_libobj=${1}
+ if test "$build_libtool_libs" = yes; then
+ write_lobj=\'${2}\'
+ else
+ write_lobj=none
+ fi
+
+ if test "$build_old_libs" = yes; then
+ write_oldobj=\'${3}\'
+ else
+ write_oldobj=none
+ fi
+
+ $opt_dry_run || {
+ cat >${write_libobj}T <<EOF
+# $write_libobj - a libtool object file
+# Generated by $PROGRAM (GNU $PACKAGE$TIMESTAMP) $VERSION
+#
+# Please DO NOT delete this file!
+# It is necessary for linking the library.
+
+# Name of the PIC object.
+pic_object=$write_lobj
+
+# Name of the non-PIC object
+non_pic_object=$write_oldobj
+
+EOF
+ $MV "${write_libobj}T" "${write_libobj}"
+ }
+}
+
+# func_mode_compile arg...
+func_mode_compile ()
+{
+ $opt_debug
+ # Get the compilation command and the source file.
+ base_compile=
+ srcfile="$nonopt" # always keep a non-empty value in "srcfile"
+ suppress_opt=yes
+ suppress_output=
+ arg_mode=normal
+ libobj=
+ later=
+ pie_flag=
+
+ for arg
+ do
+ case $arg_mode in
+ arg )
+ # do not "continue". Instead, add this to base_compile
+ lastarg="$arg"
+ arg_mode=normal
+ ;;
+
+ target )
+ libobj="$arg"
+ arg_mode=normal
+ continue
+ ;;
+
+ normal )
+ # Accept any command-line options.
+ case $arg in
+ -o)
+ test -n "$libobj" && \
+ func_fatal_error "you cannot specify \`-o' more than once"
+ arg_mode=target
+ continue
+ ;;
+
+ -pie | -fpie | -fPIE)
+ pie_flag="$pie_flag $arg"
+ continue
+ ;;
+
+ -shared | -static | -prefer-pic | -prefer-non-pic)
+ later="$later $arg"
+ continue
+ ;;
+
+ -no-suppress)
+ suppress_opt=no
+ continue
+ ;;
+
+ -Xcompiler)
+ arg_mode=arg # the next one goes into the "base_compile" arg list
+ continue # The current "srcfile" will either be retained or
+ ;; # replaced later. I would guess that would be a bug.
+
+ -Wc,*)
+ func_stripname '-Wc,' '' "$arg"
+ args=$func_stripname_result
+ lastarg=
+ save_ifs="$IFS"; IFS=','
+ for arg in $args; do
+ IFS="$save_ifs"
+ func_quote_for_eval "$arg"
+ lastarg="$lastarg $func_quote_for_eval_result"
+ done
+ IFS="$save_ifs"
+ func_stripname ' ' '' "$lastarg"
+ lastarg=$func_stripname_result
+
+ # Add the arguments to base_compile.
+ base_compile="$base_compile $lastarg"
+ continue
+ ;;
+
+ *)
+ # Accept the current argument as the source file.
+ # The previous "srcfile" becomes the current argument.
+ #
+ lastarg="$srcfile"
+ srcfile="$arg"
+ ;;
+ esac # case $arg
+ ;;
+ esac # case $arg_mode
+
+ # Aesthetically quote the previous argument.
+ func_quote_for_eval "$lastarg"
+ base_compile="$base_compile $func_quote_for_eval_result"
+ done # for arg
+
+ case $arg_mode in
+ arg)
+ func_fatal_error "you must specify an argument for -Xcompile"
+ ;;
+ target)
+ func_fatal_error "you must specify a target with \`-o'"
+ ;;
+ *)
+ # Get the name of the library object.
+ test -z "$libobj" && {
+ func_basename "$srcfile"
+ libobj="$func_basename_result"
+ }
+ ;;
+ esac
+
+ # Recognize several different file suffixes.
+ # If the user specifies -o file.o, it is replaced with file.lo
+ case $libobj in
+ *.[cCFSifmso] | \
+ *.ada | *.adb | *.ads | *.asm | \
+ *.c++ | *.cc | *.ii | *.class | *.cpp | *.cxx | \
+ *.[fF][09]? | *.for | *.java | *.obj | *.sx)
+ func_xform "$libobj"
+ libobj=$func_xform_result
+ ;;
+ esac
+
+ case $libobj in
+ *.lo) func_lo2o "$libobj"; obj=$func_lo2o_result ;;
+ *)
+ func_fatal_error "cannot determine name of library object from \`$libobj'"
+ ;;
+ esac
+
+ func_infer_tag $base_compile
+
+ for arg in $later; do
+ case $arg in
+ -shared)
+ test "$build_libtool_libs" != yes && \
+ func_fatal_configuration "can not build a shared library"
+ build_old_libs=no
+ continue
+ ;;
+
+ -static)
+ build_libtool_libs=no
+ build_old_libs=yes
+ continue
+ ;;
+
+ -prefer-pic)
+ pic_mode=yes
+ continue
+ ;;
+
+ -prefer-non-pic)
+ pic_mode=no
+ continue
+ ;;
+ esac
+ done
+
+ func_quote_for_eval "$libobj"
+ test "X$libobj" != "X$func_quote_for_eval_result" \
+ && $ECHO "X$libobj" | $GREP '[]~#^*{};<>?"'"'"' &()|`$[]' \
+ && func_warning "libobj name \`$libobj' may not contain shell special characters."
+ func_dirname_and_basename "$obj" "/" ""
+ objname="$func_basename_result"
+ xdir="$func_dirname_result"
+ lobj=${xdir}$objdir/$objname
+
+ test -z "$base_compile" && \
+ func_fatal_help "you must specify a compilation command"
+
+ # Delete any leftover library objects.
+ if test "$build_old_libs" = yes; then
+ removelist="$obj $lobj $libobj ${libobj}T"
+ else
+ removelist="$lobj $libobj ${libobj}T"
+ fi
+
+ # On Cygwin there's no "real" PIC flag so we must build both object types
+ case $host_os in
+ cygwin* | mingw* | pw32* | os2* | cegcc*)
+ pic_mode=default
+ ;;
+ esac
+ if test "$pic_mode" = no && test "$deplibs_check_method" != pass_all; then
+ # non-PIC code in shared libraries is not supported
+ pic_mode=default
+ fi
+
+ # Calculate the filename of the output object if compiler does
+ # not support -o with -c
+ if test "$compiler_c_o" = no; then
+ output_obj=`$ECHO "X$srcfile" | $Xsed -e 's%^.*/%%' -e 's%\.[^.]*$%%'`.${objext}
+ lockfile="$output_obj.lock"
+ else
+ output_obj=
+ need_locks=no
+ lockfile=
+ fi
+
+ # Lock this critical section if it is needed
+ # We use this script file to make the link, it avoids creating a new file
+ if test "$need_locks" = yes; then
+ until $opt_dry_run || ln "$progpath" "$lockfile" 2>/dev/null; do
+ func_echo "Waiting for $lockfile to be removed"
+ sleep 2
+ done
+ elif test "$need_locks" = warn; then
+ if test -f "$lockfile"; then
+ $ECHO "\
+*** ERROR, $lockfile exists and contains:
+`cat $lockfile 2>/dev/null`
+
+This indicates that another process is trying to use the same
+temporary object file, and libtool could not work around it because
+your compiler does not support \`-c' and \`-o' together. If you
+repeat this compilation, it may succeed, by chance, but you had better
+avoid parallel builds (make -j) in this platform, or get a better
+compiler."
+
+ $opt_dry_run || $RM $removelist
+ exit $EXIT_FAILURE
+ fi
+ removelist="$removelist $output_obj"
+ $ECHO "$srcfile" > "$lockfile"
+ fi
+
+ $opt_dry_run || $RM $removelist
+ removelist="$removelist $lockfile"
+ trap '$opt_dry_run || $RM $removelist; exit $EXIT_FAILURE' 1 2 15
+
+ if test -n "$fix_srcfile_path"; then
+ eval srcfile=\"$fix_srcfile_path\"
+ fi
+ func_quote_for_eval "$srcfile"
+ qsrcfile=$func_quote_for_eval_result
+
+ # Only build a PIC object if we are building libtool libraries.
+ if test "$build_libtool_libs" = yes; then
+ # Without this assignment, base_compile gets emptied.
+ fbsd_hideous_sh_bug=$base_compile
+
+ if test "$pic_mode" != no; then
+ command="$base_compile $qsrcfile $pic_flag"
+ else
+ # Don't build PIC code
+ command="$base_compile $qsrcfile"
+ fi
+
+ func_mkdir_p "$xdir$objdir"
+
+ if test -z "$output_obj"; then
+ # Place PIC objects in $objdir
+ command="$command -o $lobj"
+ fi
+
+ func_show_eval_locale "$command" \
+ 'test -n "$output_obj" && $RM $removelist; exit $EXIT_FAILURE'
+
+ if test "$need_locks" = warn &&
+ test "X`cat $lockfile 2>/dev/null`" != "X$srcfile"; then
+ $ECHO "\
+*** ERROR, $lockfile contains:
+`cat $lockfile 2>/dev/null`
+
+but it should contain:
+$srcfile
+
+This indicates that another process is trying to use the same
+temporary object file, and libtool could not work around it because
+your compiler does not support \`-c' and \`-o' together. If you
+repeat this compilation, it may succeed, by chance, but you had better
+avoid parallel builds (make -j) in this platform, or get a better
+compiler."
+
+ $opt_dry_run || $RM $removelist
+ exit $EXIT_FAILURE
+ fi
+
+ # Just move the object if needed, then go on to compile the next one
+ if test -n "$output_obj" && test "X$output_obj" != "X$lobj"; then
+ func_show_eval '$MV "$output_obj" "$lobj"' \
+ 'error=$?; $opt_dry_run || $RM $removelist; exit $error'
+ fi
+
+ # Allow error messages only from the first compilation.
+ if test "$suppress_opt" = yes; then
+ suppress_output=' >/dev/null 2>&1'
+ fi
+ fi
+
+ # Only build a position-dependent object if we build old libraries.
+ if test "$build_old_libs" = yes; then
+ if test "$pic_mode" != yes; then
+ # Don't build PIC code
+ command="$base_compile $qsrcfile$pie_flag"
+ else
+ command="$base_compile $qsrcfile $pic_flag"
+ fi
+ if test "$compiler_c_o" = yes; then
+ command="$command -o $obj"
+ fi
+
+ # Suppress compiler output if we already did a PIC compilation.
+ command="$command$suppress_output"
+ func_show_eval_locale "$command" \
+ '$opt_dry_run || $RM $removelist; exit $EXIT_FAILURE'
+
+ if test "$need_locks" = warn &&
+ test "X`cat $lockfile 2>/dev/null`" != "X$srcfile"; then
+ $ECHO "\
+*** ERROR, $lockfile contains:
+`cat $lockfile 2>/dev/null`
+
+but it should contain:
+$srcfile
+
+This indicates that another process is trying to use the same
+temporary object file, and libtool could not work around it because
+your compiler does not support \`-c' and \`-o' together. If you
+repeat this compilation, it may succeed, by chance, but you had better
+avoid parallel builds (make -j) in this platform, or get a better
+compiler."
+
+ $opt_dry_run || $RM $removelist
+ exit $EXIT_FAILURE
+ fi
+
+ # Just move the object if needed
+ if test -n "$output_obj" && test "X$output_obj" != "X$obj"; then
+ func_show_eval '$MV "$output_obj" "$obj"' \
+ 'error=$?; $opt_dry_run || $RM $removelist; exit $error'
+ fi
+ fi
+
+ $opt_dry_run || {
+ func_write_libtool_object "$libobj" "$objdir/$objname" "$objname"
+
+ # Unlock the critical section if it was locked
+ if test "$need_locks" != no; then
+ removelist=$lockfile
+ $RM "$lockfile"
+ fi
+ }
+
+ exit $EXIT_SUCCESS
+}
+
+$opt_help || {
+test "$mode" = compile && func_mode_compile ${1+"$@"}
+}
+
+func_mode_help ()
+{
+ # We need to display help for each of the modes.
+ case $mode in
+ "")
+ # Generic help is extracted from the usage comments
+ # at the start of this file.
+ func_help
+ ;;
+
+ clean)
+ $ECHO \
+"Usage: $progname [OPTION]... --mode=clean RM [RM-OPTION]... FILE...
+
+Remove files from the build directory.
+
+RM is the name of the program to use to delete files associated with each FILE
+(typically \`/bin/rm'). RM-OPTIONS are options (such as \`-f') to be passed
+to RM.
+
+If FILE is a libtool library, object or program, all the files associated
+with it are deleted. Otherwise, only FILE itself is deleted using RM."
+ ;;
+
+ compile)
+ $ECHO \
+"Usage: $progname [OPTION]... --mode=compile COMPILE-COMMAND... SOURCEFILE
+
+Compile a source file into a libtool library object.
+
+This mode accepts the following additional options:
+
+ -o OUTPUT-FILE set the output file name to OUTPUT-FILE
+ -no-suppress do not suppress compiler output for multiple passes
+ -prefer-pic try to building PIC objects only
+ -prefer-non-pic try to building non-PIC objects only
+ -shared do not build a \`.o' file suitable for static linking
+ -static only build a \`.o' file suitable for static linking
+
+COMPILE-COMMAND is a command to be used in creating a \`standard' object file
+from the given SOURCEFILE.
+
+The output file name is determined by removing the directory component from
+SOURCEFILE, then substituting the C source code suffix \`.c' with the
+library object suffix, \`.lo'."
+ ;;
+
+ execute)
+ $ECHO \
+"Usage: $progname [OPTION]... --mode=execute COMMAND [ARGS]...
+
+Automatically set library path, then run a program.
+
+This mode accepts the following additional options:
+
+ -dlopen FILE add the directory containing FILE to the library path
+
+This mode sets the library path environment variable according to \`-dlopen'
+flags.
+
+If any of the ARGS are libtool executable wrappers, then they are translated
+into their corresponding uninstalled binary, and any of their required library
+directories are added to the library path.
+
+Then, COMMAND is executed, with ARGS as arguments."
+ ;;
+
+ finish)
+ $ECHO \
+"Usage: $progname [OPTION]... --mode=finish [LIBDIR]...
+
+Complete the installation of libtool libraries.
+
+Each LIBDIR is a directory that contains libtool libraries.
+
+The commands that this mode executes may require superuser privileges. Use
+the \`--dry-run' option if you just want to see what would be executed."
+ ;;
+
+ install)
+ $ECHO \
+"Usage: $progname [OPTION]... --mode=install INSTALL-COMMAND...
+
+Install executables or libraries.
+
+INSTALL-COMMAND is the installation command. The first component should be
+either the \`install' or \`cp' program.
+
+The following components of INSTALL-COMMAND are treated specially:
+
+ -inst-prefix PREFIX-DIR Use PREFIX-DIR as a staging area for installation
+
+The rest of the components are interpreted as arguments to that command (only
+BSD-compatible install options are recognized)."
+ ;;
+
+ link)
+ $ECHO \
+"Usage: $progname [OPTION]... --mode=link LINK-COMMAND...
+
+Link object files or libraries together to form another library, or to
+create an executable program.
+
+LINK-COMMAND is a command using the C compiler that you would use to create
+a program from several object files.
+
+The following components of LINK-COMMAND are treated specially:
+
+ -all-static do not do any dynamic linking at all
+ -avoid-version do not add a version suffix if possible
+ -dlopen FILE \`-dlpreopen' FILE if it cannot be dlopened at runtime
+ -dlpreopen FILE link in FILE and add its symbols to lt_preloaded_symbols
+ -export-dynamic allow symbols from OUTPUT-FILE to be resolved with dlsym(3)
+ -export-symbols SYMFILE
+ try to export only the symbols listed in SYMFILE
+ -export-symbols-regex REGEX
+ try to export only the symbols matching REGEX
+ -LLIBDIR search LIBDIR for required installed libraries
+ -lNAME OUTPUT-FILE requires the installed library libNAME
+ -module build a library that can dlopened
+ -no-fast-install disable the fast-install mode
+ -no-install link a not-installable executable
+ -no-undefined declare that a library does not refer to external symbols
+ -o OUTPUT-FILE create OUTPUT-FILE from the specified objects
+ -objectlist FILE Use a list of object files found in FILE to specify objects
+ -precious-files-regex REGEX
+ don't remove output files matching REGEX
+ -release RELEASE specify package release information
+ -rpath LIBDIR the created library will eventually be installed in LIBDIR
+ -R[ ]LIBDIR add LIBDIR to the runtime path of programs and libraries
+ -shared only do dynamic linking of libtool libraries
+ -shrext SUFFIX override the standard shared library file extension
+ -static do not do any dynamic linking of uninstalled libtool libraries
+ -static-libtool-libs
+ do not do any dynamic linking of libtool libraries
+ -version-info CURRENT[:REVISION[:AGE]]
+ specify library version info [each variable defaults to 0]
+ -weak LIBNAME declare that the target provides the LIBNAME interface
+
+All other options (arguments beginning with \`-') are ignored.
+
+Every other argument is treated as a filename. Files ending in \`.la' are
+treated as uninstalled libtool libraries, other files are standard or library
+object files.
+
+If the OUTPUT-FILE ends in \`.la', then a libtool library is created,
+only library objects (\`.lo' files) may be specified, and \`-rpath' is
+required, except when creating a convenience library.
+
+If OUTPUT-FILE ends in \`.a' or \`.lib', then a standard library is created
+using \`ar' and \`ranlib', or on Windows using \`lib'.
+
+If OUTPUT-FILE ends in \`.lo' or \`.${objext}', then a reloadable object file
+is created, otherwise an executable program is created."
+ ;;
+
+ uninstall)
+ $ECHO \
+"Usage: $progname [OPTION]... --mode=uninstall RM [RM-OPTION]... FILE...
+
+Remove libraries from an installation directory.
+
+RM is the name of the program to use to delete files associated with each FILE
+(typically \`/bin/rm'). RM-OPTIONS are options (such as \`-f') to be passed
+to RM.
+
+If FILE is a libtool library, all the files associated with it are deleted.
+Otherwise, only FILE itself is deleted using RM."
+ ;;
+
+ *)
+ func_fatal_help "invalid operation mode \`$mode'"
+ ;;
+ esac
+
+ $ECHO
+ $ECHO "Try \`$progname --help' for more information about other modes."
+
+ exit $?
+}
+
+ # Now that we've collected a possible --mode arg, show help if necessary
+ $opt_help && func_mode_help
+
+
+# func_mode_execute arg...
+func_mode_execute ()
+{
+ $opt_debug
+ # The first argument is the command name.
+ cmd="$nonopt"
+ test -z "$cmd" && \
+ func_fatal_help "you must specify a COMMAND"
+
+ # Handle -dlopen flags immediately.
+ for file in $execute_dlfiles; do
+ test -f "$file" \
+ || func_fatal_help "\`$file' is not a file"
+
+ dir=
+ case $file in
+ *.la)
+ # Check to see that this really is a libtool archive.
+ func_lalib_unsafe_p "$file" \
+ || func_fatal_help "\`$lib' is not a valid libtool archive"
+
+ # Read the libtool library.
+ dlname=
+ library_names=
+ func_source "$file"
+
+ # Skip this library if it cannot be dlopened.
+ if test -z "$dlname"; then
+ # Warn if it was a shared library.
+ test -n "$library_names" && \
+ func_warning "\`$file' was not linked with \`-export-dynamic'"
+ continue
+ fi
+
+ func_dirname "$file" "" "."
+ dir="$func_dirname_result"
+
+ if test -f "$dir/$objdir/$dlname"; then
+ dir="$dir/$objdir"
+ else
+ if test ! -f "$dir/$dlname"; then
+ func_fatal_error "cannot find \`$dlname' in \`$dir' or \`$dir/$objdir'"
+ fi
+ fi
+ ;;
+
+ *.lo)
+ # Just add the directory containing the .lo file.
+ func_dirname "$file" "" "."
+ dir="$func_dirname_result"
+ ;;
+
+ *)
+ func_warning "\`-dlopen' is ignored for non-libtool libraries and objects"
+ continue
+ ;;
+ esac
+
+ # Get the absolute pathname.
+ absdir=`cd "$dir" && pwd`
+ test -n "$absdir" && dir="$absdir"
+
+ # Now add the directory to shlibpath_var.
+ if eval "test -z \"\$$shlibpath_var\""; then
+ eval "$shlibpath_var=\"\$dir\""
+ else
+ eval "$shlibpath_var=\"\$dir:\$$shlibpath_var\""
+ fi
+ done
+
+ # This variable tells wrapper scripts just to set shlibpath_var
+ # rather than running their programs.
+ libtool_execute_magic="$magic"
+
+ # Check if any of the arguments is a wrapper script.
+ args=
+ for file
+ do
+ case $file in
+ -*) ;;
+ *)
+ # Do a test to see if this is really a libtool program.
+ if func_ltwrapper_script_p "$file"; then
+ func_source "$file"
+ # Transform arg to wrapped name.
+ file="$progdir/$program"
+ elif func_ltwrapper_executable_p "$file"; then
+ func_ltwrapper_scriptname "$file"
+ func_source "$func_ltwrapper_scriptname_result"
+ # Transform arg to wrapped name.
+ file="$progdir/$program"
+ fi
+ ;;
+ esac
+ # Quote arguments (to preserve shell metacharacters).
+ func_quote_for_eval "$file"
+ args="$args $func_quote_for_eval_result"
+ done
+
+ if test "X$opt_dry_run" = Xfalse; then
+ if test -n "$shlibpath_var"; then
+ # Export the shlibpath_var.
+ eval "export $shlibpath_var"
+ fi
+
+ # Restore saved environment variables
+ for lt_var in LANG LANGUAGE LC_ALL LC_CTYPE LC_COLLATE LC_MESSAGES
+ do
+ eval "if test \"\${save_$lt_var+set}\" = set; then
+ $lt_var=\$save_$lt_var; export $lt_var
+ else
+ $lt_unset $lt_var
+ fi"
+ done
+
+ # Now prepare to actually exec the command.
+ exec_cmd="\$cmd$args"
+ else
+ # Display what would be done.
+ if test -n "$shlibpath_var"; then
+ eval "\$ECHO \"\$shlibpath_var=\$$shlibpath_var\""
+ $ECHO "export $shlibpath_var"
+ fi
+ $ECHO "$cmd$args"
+ exit $EXIT_SUCCESS
+ fi
+}
+
+test "$mode" = execute && func_mode_execute ${1+"$@"}
+
+
+# func_mode_finish arg...
+func_mode_finish ()
+{
+ $opt_debug
+ libdirs="$nonopt"
+ admincmds=
+
+ if test -n "$finish_cmds$finish_eval" && test -n "$libdirs"; then
+ for dir
+ do
+ libdirs="$libdirs $dir"
+ done
+
+ for libdir in $libdirs; do
+ if test -n "$finish_cmds"; then
+ # Do each command in the finish commands.
+ func_execute_cmds "$finish_cmds" 'admincmds="$admincmds
+'"$cmd"'"'
+ fi
+ if test -n "$finish_eval"; then
+ # Do the single finish_eval.
+ eval cmds=\"$finish_eval\"
+ $opt_dry_run || eval "$cmds" || admincmds="$admincmds
+ $cmds"
+ fi
+ done
+ fi
+
+ # Exit here if they wanted silent mode.
+ $opt_silent && exit $EXIT_SUCCESS
+
+ $ECHO "X----------------------------------------------------------------------" | $Xsed
+ $ECHO "Libraries have been installed in:"
+ for libdir in $libdirs; do
+ $ECHO " $libdir"
+ done
+ $ECHO
+ $ECHO "If you ever happen to want to link against installed libraries"
+ $ECHO "in a given directory, LIBDIR, you must either use libtool, and"
+ $ECHO "specify the full pathname of the library, or use the \`-LLIBDIR'"
+ $ECHO "flag during linking and do at least one of the following:"
+ if test -n "$shlibpath_var"; then
+ $ECHO " - add LIBDIR to the \`$shlibpath_var' environment variable"
+ $ECHO " during execution"
+ fi
+ if test -n "$runpath_var"; then
+ $ECHO " - add LIBDIR to the \`$runpath_var' environment variable"
+ $ECHO " during linking"
+ fi
+ if test -n "$hardcode_libdir_flag_spec"; then
+ libdir=LIBDIR
+ eval flag=\"$hardcode_libdir_flag_spec\"
+
+ $ECHO " - use the \`$flag' linker flag"
+ fi
+ if test -n "$admincmds"; then
+ $ECHO " - have your system administrator run these commands:$admincmds"
+ fi
+ if test -f /etc/ld.so.conf; then
+ $ECHO " - have your system administrator add LIBDIR to \`/etc/ld.so.conf'"
+ fi
+ $ECHO
+
+ $ECHO "See any operating system documentation about shared libraries for"
+ case $host in
+ solaris2.[6789]|solaris2.1[0-9])
+ $ECHO "more information, such as the ld(1), crle(1) and ld.so(8) manual"
+ $ECHO "pages."
+ ;;
+ *)
+ $ECHO "more information, such as the ld(1) and ld.so(8) manual pages."
+ ;;
+ esac
+ $ECHO "X----------------------------------------------------------------------" | $Xsed
+ exit $EXIT_SUCCESS
+}
+
+test "$mode" = finish && func_mode_finish ${1+"$@"}
+
+
+# func_mode_install arg...
+func_mode_install ()
+{
+ $opt_debug
+ # There may be an optional sh(1) argument at the beginning of
+ # install_prog (especially on Windows NT).
+ if test "$nonopt" = "$SHELL" || test "$nonopt" = /bin/sh ||
+ # Allow the use of GNU shtool's install command.
+ $ECHO "X$nonopt" | $GREP shtool >/dev/null; then
+ # Aesthetically quote it.
+ func_quote_for_eval "$nonopt"
+ install_prog="$func_quote_for_eval_result "
+ arg=$1
+ shift
+ else
+ install_prog=
+ arg=$nonopt
+ fi
+
+ # The real first argument should be the name of the installation program.
+ # Aesthetically quote it.
+ func_quote_for_eval "$arg"
+ install_prog="$install_prog$func_quote_for_eval_result"
+
+ # We need to accept at least all the BSD install flags.
+ dest=
+ files=
+ opts=
+ prev=
+ install_type=
+ isdir=no
+ stripme=
+ for arg
+ do
+ if test -n "$dest"; then
+ files="$files $dest"
+ dest=$arg
+ continue
+ fi
+
+ case $arg in
+ -d) isdir=yes ;;
+ -f)
+ case " $install_prog " in
+ *[\\\ /]cp\ *) ;;
+ *) prev=$arg ;;
+ esac
+ ;;
+ -g | -m | -o)
+ prev=$arg
+ ;;
+ -s)
+ stripme=" -s"
+ continue
+ ;;
+ -*)
+ ;;
+ *)
+ # If the previous option needed an argument, then skip it.
+ if test -n "$prev"; then
+ prev=
+ else
+ dest=$arg
+ continue
+ fi
+ ;;
+ esac
+
+ # Aesthetically quote the argument.
+ func_quote_for_eval "$arg"
+ install_prog="$install_prog $func_quote_for_eval_result"
+ done
+
+ test -z "$install_prog" && \
+ func_fatal_help "you must specify an install program"
+
+ test -n "$prev" && \
+ func_fatal_help "the \`$prev' option requires an argument"
+
+ if test -z "$files"; then
+ if test -z "$dest"; then
+ func_fatal_help "no file or destination specified"
+ else
+ func_fatal_help "you must specify a destination"
+ fi
+ fi
+
+ # Strip any trailing slash from the destination.
+ func_stripname '' '/' "$dest"
+ dest=$func_stripname_result
+
+ # Check to see that the destination is a directory.
+ test -d "$dest" && isdir=yes
+ if test "$isdir" = yes; then
+ destdir="$dest"
+ destname=
+ else
+ func_dirname_and_basename "$dest" "" "."
+ destdir="$func_dirname_result"
+ destname="$func_basename_result"
+
+ # Not a directory, so check to see that there is only one file specified.
+ set dummy $files; shift
+ test "$#" -gt 1 && \
+ func_fatal_help "\`$dest' is not a directory"
+ fi
+ case $destdir in
+ [\\/]* | [A-Za-z]:[\\/]*) ;;
+ *)
+ for file in $files; do
+ case $file in
+ *.lo) ;;
+ *)
+ func_fatal_help "\`$destdir' must be an absolute directory name"
+ ;;
+ esac
+ done
+ ;;
+ esac
+
+ # This variable tells wrapper scripts just to set variables rather
+ # than running their programs.
+ libtool_install_magic="$magic"
+
+ staticlibs=
+ future_libdirs=
+ current_libdirs=
+ for file in $files; do
+
+ # Do each installation.
+ case $file in
+ *.$libext)
+ # Do the static libraries later.
+ staticlibs="$staticlibs $file"
+ ;;
+
+ *.la)
+ # Check to see that this really is a libtool archive.
+ func_lalib_unsafe_p "$file" \
+ || func_fatal_help "\`$file' is not a valid libtool archive"
+
+ library_names=
+ old_library=
+ relink_command=
+ func_source "$file"
+
+ # Add the libdir to current_libdirs if it is the destination.
+ if test "X$destdir" = "X$libdir"; then
+ case "$current_libdirs " in
+ *" $libdir "*) ;;
+ *) current_libdirs="$current_libdirs $libdir" ;;
+ esac
+ else
+ # Note the libdir as a future libdir.
+ case "$future_libdirs " in
+ *" $libdir "*) ;;
+ *) future_libdirs="$future_libdirs $libdir" ;;
+ esac
+ fi
+
+ func_dirname "$file" "/" ""
+ dir="$func_dirname_result"
+ dir="$dir$objdir"
+
+ if test -n "$relink_command"; then
+ # Determine the prefix the user has applied to our future dir.
+ inst_prefix_dir=`$ECHO "X$destdir" | $Xsed -e "s%$libdir\$%%"`
+
+ # Don't allow the user to place us outside of our expected
+ # location b/c this prevents finding dependent libraries that
+ # are installed to the same prefix.
+ # At present, this check doesn't affect windows .dll's that
+ # are installed into $libdir/../bin (currently, that works fine)
+ # but it's something to keep an eye on.
+ test "$inst_prefix_dir" = "$destdir" && \
+ func_fatal_error "error: cannot install \`$file' to a directory not ending in $libdir"
+
+ if test -n "$inst_prefix_dir"; then
+ # Stick the inst_prefix_dir data into the link command.
+ relink_command=`$ECHO "X$relink_command" | $Xsed -e "s%@inst_prefix_dir@%-inst-prefix-dir $inst_prefix_dir%"`
+ else
+ relink_command=`$ECHO "X$relink_command" | $Xsed -e "s%@inst_prefix_dir@%%"`
+ fi
+
+ func_warning "relinking \`$file'"
+ func_show_eval "$relink_command" \
+ 'func_fatal_error "error: relink \`$file'\'' with the above command before installing it"'
+ fi
+
+ # See the names of the shared library.
+ set dummy $library_names; shift
+ if test -n "$1"; then
+ realname="$1"
+ shift
+
+ srcname="$realname"
+ test -n "$relink_command" && srcname="$realname"T
+
+ # Install the shared library and build the symlinks.
+ func_show_eval "$install_prog $dir/$srcname $destdir/$realname" \
+ 'exit $?'
+ tstripme="$stripme"
+ case $host_os in
+ cygwin* | mingw* | pw32* | cegcc*)
+ case $realname in
+ *.dll.a)
+ tstripme=""
+ ;;
+ esac
+ ;;
+ esac
+ if test -n "$tstripme" && test -n "$striplib"; then
+ func_show_eval "$striplib $destdir/$realname" 'exit $?'
+ fi
+
+ if test "$#" -gt 0; then
+ # Delete the old symlinks, and create new ones.
+ # Try `ln -sf' first, because the `ln' binary might depend on
+ # the symlink we replace! Solaris /bin/ln does not understand -f,
+ # so we also need to try rm && ln -s.
+ for linkname
+ do
+ test "$linkname" != "$realname" \
+ && func_show_eval "(cd $destdir && { $LN_S -f $realname $linkname || { $RM $linkname && $LN_S $realname $linkname; }; })"
+ done
+ fi
+
+ # Do each command in the postinstall commands.
+ lib="$destdir/$realname"
+ func_execute_cmds "$postinstall_cmds" 'exit $?'
+ fi
+
+ # Install the pseudo-library for information purposes.
+ func_basename "$file"
+ name="$func_basename_result"
+ instname="$dir/$name"i
+ func_show_eval "$install_prog $instname $destdir/$name" 'exit $?'
+
+ # Maybe install the static library, too.
+ test -n "$old_library" && staticlibs="$staticlibs $dir/$old_library"
+ ;;
+
+ *.lo)
+ # Install (i.e. copy) a libtool object.
+
+ # Figure out destination file name, if it wasn't already specified.
+ if test -n "$destname"; then
+ destfile="$destdir/$destname"
+ else
+ func_basename "$file"
+ destfile="$func_basename_result"
+ destfile="$destdir/$destfile"
+ fi
+
+ # Deduce the name of the destination old-style object file.
+ case $destfile in
+ *.lo)
+ func_lo2o "$destfile"
+ staticdest=$func_lo2o_result
+ ;;
+ *.$objext)
+ staticdest="$destfile"
+ destfile=
+ ;;
+ *)
+ func_fatal_help "cannot copy a libtool object to \`$destfile'"
+ ;;
+ esac
+
+ # Install the libtool object if requested.
+ test -n "$destfile" && \
+ func_show_eval "$install_prog $file $destfile" 'exit $?'
+
+ # Install the old object if enabled.
+ if test "$build_old_libs" = yes; then
+ # Deduce the name of the old-style object file.
+ func_lo2o "$file"
+ staticobj=$func_lo2o_result
+ func_show_eval "$install_prog \$staticobj \$staticdest" 'exit $?'
+ fi
+ exit $EXIT_SUCCESS
+ ;;
+
+ *)
+ # Figure out destination file name, if it wasn't already specified.
+ if test -n "$destname"; then
+ destfile="$destdir/$destname"
+ else
+ func_basename "$file"
+ destfile="$func_basename_result"
+ destfile="$destdir/$destfile"
+ fi
+
+ # If the file is missing, and there is a .exe on the end, strip it
+ # because it is most likely a libtool script we actually want to
+ # install
+ stripped_ext=""
+ case $file in
+ *.exe)
+ if test ! -f "$file"; then
+ func_stripname '' '.exe' "$file"
+ file=$func_stripname_result
+ stripped_ext=".exe"
+ fi
+ ;;
+ esac
+
+ # Do a test to see if this is really a libtool program.
+ case $host in
+ *cygwin* | *mingw*)
+ if func_ltwrapper_executable_p "$file"; then
+ func_ltwrapper_scriptname "$file"
+ wrapper=$func_ltwrapper_scriptname_result
+ else
+ func_stripname '' '.exe' "$file"
+ wrapper=$func_stripname_result
+ fi
+ ;;
+ *)
+ wrapper=$file
+ ;;
+ esac
+ if func_ltwrapper_script_p "$wrapper"; then
+ notinst_deplibs=
+ relink_command=
+
+ func_source "$wrapper"
+
+ # Check the variables that should have been set.
+ test -z "$generated_by_libtool_version" && \
+ func_fatal_error "invalid libtool wrapper script \`$wrapper'"
+
+ finalize=yes
+ for lib in $notinst_deplibs; do
+ # Check to see that each library is installed.
+ libdir=
+ if test -f "$lib"; then
+ func_source "$lib"
+ fi
+ libfile="$libdir/"`$ECHO "X$lib" | $Xsed -e 's%^.*/%%g'` ### testsuite: skip nested quoting test
+ if test -n "$libdir" && test ! -f "$libfile"; then
+ func_warning "\`$lib' has not been installed in \`$libdir'"
+ finalize=no
+ fi
+ done
+
+ relink_command=
+ func_source "$wrapper"
+
+ outputname=
+ if test "$fast_install" = no && test -n "$relink_command"; then
+ $opt_dry_run || {
+ if test "$finalize" = yes; then
+ tmpdir=`func_mktempdir`
+ func_basename "$file$stripped_ext"
+ file="$func_basename_result"
+ outputname="$tmpdir/$file"
+ # Replace the output file specification.
+ relink_command=`$ECHO "X$relink_command" | $Xsed -e 's%@OUTPUT@%'"$outputname"'%g'`
+
+ $opt_silent || {
+ func_quote_for_expand "$relink_command"
+ eval "func_echo $func_quote_for_expand_result"
+ }
+ if eval "$relink_command"; then :
+ else
+ func_error "error: relink \`$file' with the above command before installing it"
+ $opt_dry_run || ${RM}r "$tmpdir"
+ continue
+ fi
+ file="$outputname"
+ else
+ func_warning "cannot relink \`$file'"
+ fi
+ }
+ else
+ # Install the binary that we compiled earlier.
+ file=`$ECHO "X$file$stripped_ext" | $Xsed -e "s%\([^/]*\)$%$objdir/\1%"`
+ fi
+ fi
+
+ # remove .exe since cygwin /usr/bin/install will append another
+ # one anyway
+ case $install_prog,$host in
+ */usr/bin/install*,*cygwin*)
+ case $file:$destfile in
+ *.exe:*.exe)
+ # this is ok
+ ;;
+ *.exe:*)
+ destfile=$destfile.exe
+ ;;
+ *:*.exe)
+ func_stripname '' '.exe' "$destfile"
+ destfile=$func_stripname_result
+ ;;
+ esac
+ ;;
+ esac
+ func_show_eval "$install_prog\$stripme \$file \$destfile" 'exit $?'
+ $opt_dry_run || if test -n "$outputname"; then
+ ${RM}r "$tmpdir"
+ fi
+ ;;
+ esac
+ done
+
+ for file in $staticlibs; do
+ func_basename "$file"
+ name="$func_basename_result"
+
+ # Set up the ranlib parameters.
+ oldlib="$destdir/$name"
+
+ func_show_eval "$install_prog \$file \$oldlib" 'exit $?'
+
+ if test -n "$stripme" && test -n "$old_striplib"; then
+ func_show_eval "$old_striplib $oldlib" 'exit $?'
+ fi
+
+ # Do each command in the postinstall commands.
+ func_execute_cmds "$old_postinstall_cmds" 'exit $?'
+ done
+
+ test -n "$future_libdirs" && \
+ func_warning "remember to run \`$progname --finish$future_libdirs'"
+
+ if test -n "$current_libdirs"; then
+ # Maybe just do a dry run.
+ $opt_dry_run && current_libdirs=" -n$current_libdirs"
+ exec_cmd='$SHELL $progpath $preserve_args --finish$current_libdirs'
+ else
+ exit $EXIT_SUCCESS
+ fi
+}
+
+test "$mode" = install && func_mode_install ${1+"$@"}
+
+
+# func_generate_dlsyms outputname originator pic_p
+# Extract symbols from dlprefiles and create ${outputname}S.o with
+# a dlpreopen symbol table.
+func_generate_dlsyms ()
+{
+ $opt_debug
+ my_outputname="$1"
+ my_originator="$2"
+ my_pic_p="${3-no}"
+ my_prefix=`$ECHO "$my_originator" | sed 's%[^a-zA-Z0-9]%_%g'`
+ my_dlsyms=
+
+ if test -n "$dlfiles$dlprefiles" || test "$dlself" != no; then
+ if test -n "$NM" && test -n "$global_symbol_pipe"; then
+ my_dlsyms="${my_outputname}S.c"
+ else
+ func_error "not configured to extract global symbols from dlpreopened files"
+ fi
+ fi
+
+ if test -n "$my_dlsyms"; then
+ case $my_dlsyms in
+ "") ;;
+ *.c)
+ # Discover the nlist of each of the dlfiles.
+ nlist="$output_objdir/${my_outputname}.nm"
+
+ func_show_eval "$RM $nlist ${nlist}S ${nlist}T"
+
+ # Parse the name list into a source file.
+ func_verbose "creating $output_objdir/$my_dlsyms"
+
+ $opt_dry_run || $ECHO > "$output_objdir/$my_dlsyms" "\
+/* $my_dlsyms - symbol resolution table for \`$my_outputname' dlsym emulation. */
+/* Generated by $PROGRAM (GNU $PACKAGE$TIMESTAMP) $VERSION */
+
+#ifdef __cplusplus
+extern \"C\" {
+#endif
+
+/* External symbol declarations for the compiler. */\
+"
+
+ if test "$dlself" = yes; then
+ func_verbose "generating symbol list for \`$output'"
+
+ $opt_dry_run || echo ': @PROGRAM@ ' > "$nlist"
+
+ # Add our own program objects to the symbol list.
+ progfiles=`$ECHO "X$objs$old_deplibs" | $SP2NL | $Xsed -e "$lo2o" | $NL2SP`
+ for progfile in $progfiles; do
+ func_verbose "extracting global C symbols from \`$progfile'"
+ $opt_dry_run || eval "$NM $progfile | $global_symbol_pipe >> '$nlist'"
+ done
+
+ if test -n "$exclude_expsyms"; then
+ $opt_dry_run || {
+ eval '$EGREP -v " ($exclude_expsyms)$" "$nlist" > "$nlist"T'
+ eval '$MV "$nlist"T "$nlist"'
+ }
+ fi
+
+ if test -n "$export_symbols_regex"; then
+ $opt_dry_run || {
+ eval '$EGREP -e "$export_symbols_regex" "$nlist" > "$nlist"T'
+ eval '$MV "$nlist"T "$nlist"'
+ }
+ fi
+
+ # Prepare the list of exported symbols
+ if test -z "$export_symbols"; then
+ export_symbols="$output_objdir/$outputname.exp"
+ $opt_dry_run || {
+ $RM $export_symbols
+ eval "${SED} -n -e '/^: @PROGRAM@ $/d' -e 's/^.* \(.*\)$/\1/p' "'< "$nlist" > "$export_symbols"'
+ case $host in
+ *cygwin* | *mingw* | *cegcc* )
+ eval "echo EXPORTS "'> "$output_objdir/$outputname.def"'
+ eval 'cat "$export_symbols" >> "$output_objdir/$outputname.def"'
+ ;;
+ esac
+ }
+ else
+ $opt_dry_run || {
+ eval "${SED} -e 's/\([].[*^$]\)/\\\\\1/g' -e 's/^/ /' -e 's/$/$/'"' < "$export_symbols" > "$output_objdir/$outputname.exp"'
+ eval '$GREP -f "$output_objdir/$outputname.exp" < "$nlist" > "$nlist"T'
+ eval '$MV "$nlist"T "$nlist"'
+ case $host in
+ *cygwin | *mingw* | *cegcc* )
+ eval "echo EXPORTS "'> "$output_objdir/$outputname.def"'
+ eval 'cat "$nlist" >> "$output_objdir/$outputname.def"'
+ ;;
+ esac
+ }
+ fi
+ fi
+
+ for dlprefile in $dlprefiles; do
+ func_verbose "extracting global C symbols from \`$dlprefile'"
+ func_basename "$dlprefile"
+ name="$func_basename_result"
+ $opt_dry_run || {
+ eval '$ECHO ": $name " >> "$nlist"'
+ eval "$NM $dlprefile 2>/dev/null | $global_symbol_pipe >> '$nlist'"
+ }
+ done
+
+ $opt_dry_run || {
+ # Make sure we have at least an empty file.
+ test -f "$nlist" || : > "$nlist"
+
+ if test -n "$exclude_expsyms"; then
+ $EGREP -v " ($exclude_expsyms)$" "$nlist" > "$nlist"T
+ $MV "$nlist"T "$nlist"
+ fi
+
+ # Try sorting and uniquifying the output.
+ if $GREP -v "^: " < "$nlist" |
+ if sort -k 3 </dev/null >/dev/null 2>&1; then
+ sort -k 3
+ else
+ sort +2
+ fi |
+ uniq > "$nlist"S; then
+ :
+ else
+ $GREP -v "^: " < "$nlist" > "$nlist"S
+ fi
+
+ if test -f "$nlist"S; then
+ eval "$global_symbol_to_cdecl"' < "$nlist"S >> "$output_objdir/$my_dlsyms"'
+ else
+ $ECHO '/* NONE */' >> "$output_objdir/$my_dlsyms"
+ fi
+
+ $ECHO >> "$output_objdir/$my_dlsyms" "\
+
+/* The mapping between symbol names and symbols. */
+typedef struct {
+ const char *name;
+ void *address;
+} lt_dlsymlist;
+"
+ case $host in
+ *cygwin* | *mingw* | *cegcc* )
+ $ECHO >> "$output_objdir/$my_dlsyms" "\
+/* DATA imports from DLLs on WIN32 con't be const, because
+ runtime relocations are performed -- see ld's documentation
+ on pseudo-relocs. */"
+ lt_dlsym_const= ;;
+ *osf5*)
+ echo >> "$output_objdir/$my_dlsyms" "\
+/* This system does not cope well with relocations in const data */"
+ lt_dlsym_const= ;;
+ *)
+ lt_dlsym_const=const ;;
+ esac
+
+ $ECHO >> "$output_objdir/$my_dlsyms" "\
+extern $lt_dlsym_const lt_dlsymlist
+lt_${my_prefix}_LTX_preloaded_symbols[];
+$lt_dlsym_const lt_dlsymlist
+lt_${my_prefix}_LTX_preloaded_symbols[] =
+{\
+ { \"$my_originator\", (void *) 0 },"
+
+ case $need_lib_prefix in
+ no)
+ eval "$global_symbol_to_c_name_address" < "$nlist" >> "$output_objdir/$my_dlsyms"
+ ;;
+ *)
+ eval "$global_symbol_to_c_name_address_lib_prefix" < "$nlist" >> "$output_objdir/$my_dlsyms"
+ ;;
+ esac
+ $ECHO >> "$output_objdir/$my_dlsyms" "\
+ {0, (void *) 0}
+};
+
+/* This works around a problem in FreeBSD linker */
+#ifdef FREEBSD_WORKAROUND
+static const void *lt_preloaded_setup() {
+ return lt_${my_prefix}_LTX_preloaded_symbols;
+}
+#endif
+
+#ifdef __cplusplus
+}
+#endif\
+"
+ } # !$opt_dry_run
+
+ pic_flag_for_symtable=
+ case "$compile_command " in
+ *" -static "*) ;;
+ *)
+ case $host in
+ # compiling the symbol table file with pic_flag works around
+ # a FreeBSD bug that causes programs to crash when -lm is
+ # linked before any other PIC object. But we must not use
+ # pic_flag when linking with -static. The problem exists in
+ # FreeBSD 2.2.6 and is fixed in FreeBSD 3.1.
+ *-*-freebsd2*|*-*-freebsd3.0*|*-*-freebsdelf3.0*)
+ pic_flag_for_symtable=" $pic_flag -DFREEBSD_WORKAROUND" ;;
+ *-*-hpux*)
+ pic_flag_for_symtable=" $pic_flag" ;;
+ *)
+ if test "X$my_pic_p" != Xno; then
+ pic_flag_for_symtable=" $pic_flag"
+ fi
+ ;;
+ esac
+ ;;
+ esac
+ symtab_cflags=
+ for arg in $LTCFLAGS; do
+ case $arg in
+ -pie | -fpie | -fPIE) ;;
+ *) symtab_cflags="$symtab_cflags $arg" ;;
+ esac
+ done
+
+ # Now compile the dynamic symbol file.
+ func_show_eval '(cd $output_objdir && $LTCC$symtab_cflags -c$no_builtin_flag$pic_flag_for_symtable "$my_dlsyms")' 'exit $?'
+
+ # Clean up the generated files.
+ func_show_eval '$RM "$output_objdir/$my_dlsyms" "$nlist" "${nlist}S" "${nlist}T"'
+
+ # Transform the symbol file into the correct name.
+ symfileobj="$output_objdir/${my_outputname}S.$objext"
+ case $host in
+ *cygwin* | *mingw* | *cegcc* )
+ if test -f "$output_objdir/$my_outputname.def"; then
+ compile_command=`$ECHO "X$compile_command" | $Xsed -e "s%@SYMFILE@%$output_objdir/$my_outputname.def $symfileobj%"`
+ finalize_command=`$ECHO "X$finalize_command" | $Xsed -e "s%@SYMFILE@%$output_objdir/$my_outputname.def $symfileobj%"`
+ else
+ compile_command=`$ECHO "X$compile_command" | $Xsed -e "s%@SYMFILE@%$symfileobj%"`
+ finalize_command=`$ECHO "X$finalize_command" | $Xsed -e "s%@SYMFILE@%$symfileobj%"`
+ fi
+ ;;
+ *)
+ compile_command=`$ECHO "X$compile_command" | $Xsed -e "s%@SYMFILE@%$symfileobj%"`
+ finalize_command=`$ECHO "X$finalize_command" | $Xsed -e "s%@SYMFILE@%$symfileobj%"`
+ ;;
+ esac
+ ;;
+ *)
+ func_fatal_error "unknown suffix for \`$my_dlsyms'"
+ ;;
+ esac
+ else
+ # We keep going just in case the user didn't refer to
+ # lt_preloaded_symbols. The linker will fail if global_symbol_pipe
+ # really was required.
+
+ # Nullify the symbol file.
+ compile_command=`$ECHO "X$compile_command" | $Xsed -e "s% @SYMFILE@%%"`
+ finalize_command=`$ECHO "X$finalize_command" | $Xsed -e "s% @SYMFILE@%%"`
+ fi
+}
+
+# func_win32_libid arg
+# return the library type of file 'arg'
+#
+# Need a lot of goo to handle *both* DLLs and import libs
+# Has to be a shell function in order to 'eat' the argument
+# that is supplied when $file_magic_command is called.
+func_win32_libid ()
+{
+ $opt_debug
+ win32_libid_type="unknown"
+ win32_fileres=`file -L $1 2>/dev/null`
+ case $win32_fileres in
+ *ar\ archive\ import\ library*) # definitely import
+ win32_libid_type="x86 archive import"
+ ;;
+ *ar\ archive*) # could be an import, or static
+ if eval $OBJDUMP -f $1 | $SED -e '10q' 2>/dev/null |
+ $EGREP 'file format pe-i386(.*architecture: i386)?' >/dev/null ; then
+ win32_nmres=`eval $NM -f posix -A $1 |
+ $SED -n -e '
+ 1,100{
+ / I /{
+ s,.*,import,
+ p
+ q
+ }
+ }'`
+ case $win32_nmres in
+ import*) win32_libid_type="x86 archive import";;
+ *) win32_libid_type="x86 archive static";;
+ esac
+ fi
+ ;;
+ *DLL*)
+ win32_libid_type="x86 DLL"
+ ;;
+ *executable*) # but shell scripts are "executable" too...
+ case $win32_fileres in
+ *MS\ Windows\ PE\ Intel*)
+ win32_libid_type="x86 DLL"
+ ;;
+ esac
+ ;;
+ esac
+ $ECHO "$win32_libid_type"
+}
+
+
+
+# func_extract_an_archive dir oldlib
+func_extract_an_archive ()
+{
+ $opt_debug
+ f_ex_an_ar_dir="$1"; shift
+ f_ex_an_ar_oldlib="$1"
+ func_show_eval "(cd \$f_ex_an_ar_dir && $AR x \"\$f_ex_an_ar_oldlib\")" 'exit $?'
+ if ($AR t "$f_ex_an_ar_oldlib" | sort | sort -uc >/dev/null 2>&1); then
+ :
+ else
+ func_fatal_error "object name conflicts in archive: $f_ex_an_ar_dir/$f_ex_an_ar_oldlib"
+ fi
+}
+
+
+# func_extract_archives gentop oldlib ...
+func_extract_archives ()
+{
+ $opt_debug
+ my_gentop="$1"; shift
+ my_oldlibs=${1+"$@"}
+ my_oldobjs=""
+ my_xlib=""
+ my_xabs=""
+ my_xdir=""
+
+ for my_xlib in $my_oldlibs; do
+ # Extract the objects.
+ case $my_xlib in
+ [\\/]* | [A-Za-z]:[\\/]*) my_xabs="$my_xlib" ;;
+ *) my_xabs=`pwd`"/$my_xlib" ;;
+ esac
+ func_basename "$my_xlib"
+ my_xlib="$func_basename_result"
+ my_xlib_u=$my_xlib
+ while :; do
+ case " $extracted_archives " in
+ *" $my_xlib_u "*)
+ func_arith $extracted_serial + 1
+ extracted_serial=$func_arith_result
+ my_xlib_u=lt$extracted_serial-$my_xlib ;;
+ *) break ;;
+ esac
+ done
+ extracted_archives="$extracted_archives $my_xlib_u"
+ my_xdir="$my_gentop/$my_xlib_u"
+
+ func_mkdir_p "$my_xdir"
+
+ case $host in
+ *-darwin*)
+ func_verbose "Extracting $my_xabs"
+ # Do not bother doing anything if just a dry run
+ $opt_dry_run || {
+ darwin_orig_dir=`pwd`
+ cd $my_xdir || exit $?
+ darwin_archive=$my_xabs
+ darwin_curdir=`pwd`
+ darwin_base_archive=`basename "$darwin_archive"`
+ darwin_arches=`$LIPO -info "$darwin_archive" 2>/dev/null | $GREP Architectures 2>/dev/null || true`
+ if test -n "$darwin_arches"; then
+ darwin_arches=`$ECHO "$darwin_arches" | $SED -e 's/.*are://'`
+ darwin_arch=
+ func_verbose "$darwin_base_archive has multiple architectures $darwin_arches"
+ for darwin_arch in $darwin_arches ; do
+ func_mkdir_p "unfat-$$/${darwin_base_archive}-${darwin_arch}"
+ $LIPO -thin $darwin_arch -output "unfat-$$/${darwin_base_archive}-${darwin_arch}/${darwin_base_archive}" "${darwin_archive}"
+ cd "unfat-$$/${darwin_base_archive}-${darwin_arch}"
+ func_extract_an_archive "`pwd`" "${darwin_base_archive}"
+ cd "$darwin_curdir"
+ $RM "unfat-$$/${darwin_base_archive}-${darwin_arch}/${darwin_base_archive}"
+ done # $darwin_arches
+ ## Okay now we've a bunch of thin objects, gotta fatten them up :)
+ darwin_filelist=`find unfat-$$ -type f -name \*.o -print -o -name \*.lo -print | $SED -e "$basename" | sort -u`
+ darwin_file=
+ darwin_files=
+ for darwin_file in $darwin_filelist; do
+ darwin_files=`find unfat-$$ -name $darwin_file -print | $NL2SP`
+ $LIPO -create -output "$darwin_file" $darwin_files
+ done # $darwin_filelist
+ $RM -rf unfat-$$
+ cd "$darwin_orig_dir"
+ else
+ cd $darwin_orig_dir
+ func_extract_an_archive "$my_xdir" "$my_xabs"
+ fi # $darwin_arches
+ } # !$opt_dry_run
+ ;;
+ *)
+ func_extract_an_archive "$my_xdir" "$my_xabs"
+ ;;
+ esac
+ my_oldobjs="$my_oldobjs "`find $my_xdir -name \*.$objext -print -o -name \*.lo -print | $NL2SP`
+ done
+
+ func_extract_archives_result="$my_oldobjs"
+}
+
+
+
+# func_emit_wrapper_part1 [arg=no]
+#
+# Emit the first part of a libtool wrapper script on stdout.
+# For more information, see the description associated with
+# func_emit_wrapper(), below.
+func_emit_wrapper_part1 ()
+{
+ func_emit_wrapper_part1_arg1=no
+ if test -n "$1" ; then
+ func_emit_wrapper_part1_arg1=$1
+ fi
+
+ $ECHO "\
+#! $SHELL
+
+# $output - temporary wrapper script for $objdir/$outputname
+# Generated by $PROGRAM (GNU $PACKAGE$TIMESTAMP) $VERSION
+#
+# The $output program cannot be directly executed until all the libtool
+# libraries that it depends on are installed.
+#
+# This wrapper script should never be moved out of the build directory.
+# If it is, it will not operate correctly.
+
+# Sed substitution that helps us do robust quoting. It backslashifies
+# metacharacters that are still active within double-quoted strings.
+Xsed='${SED} -e 1s/^X//'
+sed_quote_subst='$sed_quote_subst'
+
+# Be Bourne compatible
+if test -n \"\${ZSH_VERSION+set}\" && (emulate sh) >/dev/null 2>&1; then
+ emulate sh
+ NULLCMD=:
+ # Zsh 3.x and 4.x performs word splitting on \${1+\"\$@\"}, which
+ # is contrary to our usage. Disable this feature.
+ alias -g '\${1+\"\$@\"}'='\"\$@\"'
+ setopt NO_GLOB_SUBST
+else
+ case \`(set -o) 2>/dev/null\` in *posix*) set -o posix;; esac
+fi
+BIN_SH=xpg4; export BIN_SH # for Tru64
+DUALCASE=1; export DUALCASE # for MKS sh
+
+# The HP-UX ksh and POSIX shell print the target directory to stdout
+# if CDPATH is set.
+(unset CDPATH) >/dev/null 2>&1 && unset CDPATH
+
+relink_command=\"$relink_command\"
+
+# This environment variable determines our operation mode.
+if test \"\$libtool_install_magic\" = \"$magic\"; then
+ # install mode needs the following variables:
+ generated_by_libtool_version='$macro_version'
+ notinst_deplibs='$notinst_deplibs'
+else
+ # When we are sourced in execute mode, \$file and \$ECHO are already set.
+ if test \"\$libtool_execute_magic\" != \"$magic\"; then
+ ECHO=\"$qecho\"
+ file=\"\$0\"
+ # Make sure echo works.
+ if test \"X\$1\" = X--no-reexec; then
+ # Discard the --no-reexec flag, and continue.
+ shift
+ elif test \"X\`{ \$ECHO '\t'; } 2>/dev/null\`\" = 'X\t'; then
+ # Yippee, \$ECHO works!
+ :
+ else
+ # Restart under the correct shell, and then maybe \$ECHO will work.
+ exec $SHELL \"\$0\" --no-reexec \${1+\"\$@\"}
+ fi
+ fi\
+"
+ $ECHO "\
+
+ # Find the directory that this script lives in.
+ thisdir=\`\$ECHO \"X\$file\" | \$Xsed -e 's%/[^/]*$%%'\`
+ test \"x\$thisdir\" = \"x\$file\" && thisdir=.
+
+ # Follow symbolic links until we get to the real thisdir.
+ file=\`ls -ld \"\$file\" | ${SED} -n 's/.*-> //p'\`
+ while test -n \"\$file\"; do
+ destdir=\`\$ECHO \"X\$file\" | \$Xsed -e 's%/[^/]*\$%%'\`
+
+ # If there was a directory component, then change thisdir.
+ if test \"x\$destdir\" != \"x\$file\"; then
+ case \"\$destdir\" in
+ [\\\\/]* | [A-Za-z]:[\\\\/]*) thisdir=\"\$destdir\" ;;
+ *) thisdir=\"\$thisdir/\$destdir\" ;;
+ esac
+ fi
+
+ file=\`\$ECHO \"X\$file\" | \$Xsed -e 's%^.*/%%'\`
+ file=\`ls -ld \"\$thisdir/\$file\" | ${SED} -n 's/.*-> //p'\`
+ done
+"
+}
+# end: func_emit_wrapper_part1
+
+# func_emit_wrapper_part2 [arg=no]
+#
+# Emit the second part of a libtool wrapper script on stdout.
+# For more information, see the description associated with
+# func_emit_wrapper(), below.
+func_emit_wrapper_part2 ()
+{
+ func_emit_wrapper_part2_arg1=no
+ if test -n "$1" ; then
+ func_emit_wrapper_part2_arg1=$1
+ fi
+
+ $ECHO "\
+
+ # Usually 'no', except on cygwin/mingw when embedded into
+ # the cwrapper.
+ WRAPPER_SCRIPT_BELONGS_IN_OBJDIR=$func_emit_wrapper_part2_arg1
+ if test \"\$WRAPPER_SCRIPT_BELONGS_IN_OBJDIR\" = \"yes\"; then
+ # special case for '.'
+ if test \"\$thisdir\" = \".\"; then
+ thisdir=\`pwd\`
+ fi
+ # remove .libs from thisdir
+ case \"\$thisdir\" in
+ *[\\\\/]$objdir ) thisdir=\`\$ECHO \"X\$thisdir\" | \$Xsed -e 's%[\\\\/][^\\\\/]*$%%'\` ;;
+ $objdir ) thisdir=. ;;
+ esac
+ fi
+
+ # Try to get the absolute directory name.
+ absdir=\`cd \"\$thisdir\" && pwd\`
+ test -n \"\$absdir\" && thisdir=\"\$absdir\"
+"
+
+ if test "$fast_install" = yes; then
+ $ECHO "\
+ program=lt-'$outputname'$exeext
+ progdir=\"\$thisdir/$objdir\"
+
+ if test ! -f \"\$progdir/\$program\" ||
+ { file=\`ls -1dt \"\$progdir/\$program\" \"\$progdir/../\$program\" 2>/dev/null | ${SED} 1q\`; \\
+ test \"X\$file\" != \"X\$progdir/\$program\"; }; then
+
+ file=\"\$\$-\$program\"
+
+ if test ! -d \"\$progdir\"; then
+ $MKDIR \"\$progdir\"
+ else
+ $RM \"\$progdir/\$file\"
+ fi"
+
+ $ECHO "\
+
+ # relink executable if necessary
+ if test -n \"\$relink_command\"; then
+ if relink_command_output=\`eval \$relink_command 2>&1\`; then :
+ else
+ $ECHO \"\$relink_command_output\" >&2
+ $RM \"\$progdir/\$file\"
+ exit 1
+ fi
+ fi
+
+ $MV \"\$progdir/\$file\" \"\$progdir/\$program\" 2>/dev/null ||
+ { $RM \"\$progdir/\$program\";
+ $MV \"\$progdir/\$file\" \"\$progdir/\$program\"; }
+ $RM \"\$progdir/\$file\"
+ fi"
+ else
+ $ECHO "\
+ program='$outputname'
+ progdir=\"\$thisdir/$objdir\"
+"
+ fi
+
+ $ECHO "\
+
+ if test -f \"\$progdir/\$program\"; then"
+
+ # Export our shlibpath_var if we have one.
+ if test "$shlibpath_overrides_runpath" = yes && test -n "$shlibpath_var" && test -n "$temp_rpath"; then
+ $ECHO "\
+ # Add our own library path to $shlibpath_var
+ $shlibpath_var=\"$temp_rpath\$$shlibpath_var\"
+
+ # Some systems cannot cope with colon-terminated $shlibpath_var
+ # The second colon is a workaround for a bug in BeOS R4 sed
+ $shlibpath_var=\`\$ECHO \"X\$$shlibpath_var\" | \$Xsed -e 's/::*\$//'\`
+
+ export $shlibpath_var
+"
+ fi
+
+ # fixup the dll searchpath if we need to.
+ if test -n "$dllsearchpath"; then
+ $ECHO "\
+ # Add the dll search path components to the executable PATH
+ PATH=$dllsearchpath:\$PATH
+"
+ fi
+
+ $ECHO "\
+ if test \"\$libtool_execute_magic\" != \"$magic\"; then
+ # Run the actual program with our arguments.
+"
+ case $host in
+ # Backslashes separate directories on plain windows
+ *-*-mingw | *-*-os2* | *-cegcc*)
+ $ECHO "\
+ exec \"\$progdir\\\\\$program\" \${1+\"\$@\"}
+"
+ ;;
+
+ *)
+ $ECHO "\
+ exec \"\$progdir/\$program\" \${1+\"\$@\"}
+"
+ ;;
+ esac
+ $ECHO "\
+ \$ECHO \"\$0: cannot exec \$program \$*\" 1>&2
+ exit 1
+ fi
+ else
+ # The program doesn't exist.
+ \$ECHO \"\$0: error: \\\`\$progdir/\$program' does not exist\" 1>&2
+ \$ECHO \"This script is just a wrapper for \$program.\" 1>&2
+ $ECHO \"See the $PACKAGE documentation for more information.\" 1>&2
+ exit 1
+ fi
+fi\
+"
+}
+# end: func_emit_wrapper_part2
+
+
+# func_emit_wrapper [arg=no]
+#
+# Emit a libtool wrapper script on stdout.
+# Don't directly open a file because we may want to
+# incorporate the script contents within a cygwin/mingw
+# wrapper executable. Must ONLY be called from within
+# func_mode_link because it depends on a number of variables
+# set therein.
+#
+# ARG is the value that the WRAPPER_SCRIPT_BELONGS_IN_OBJDIR
+# variable will take. If 'yes', then the emitted script
+# will assume that the directory in which it is stored is
+# the $objdir directory. This is a cygwin/mingw-specific
+# behavior.
+func_emit_wrapper ()
+{
+ func_emit_wrapper_arg1=no
+ if test -n "$1" ; then
+ func_emit_wrapper_arg1=$1
+ fi
+
+ # split this up so that func_emit_cwrapperexe_src
+ # can call each part independently.
+ func_emit_wrapper_part1 "${func_emit_wrapper_arg1}"
+ func_emit_wrapper_part2 "${func_emit_wrapper_arg1}"
+}
+
+
+# func_to_host_path arg
+#
+# Convert paths to host format when used with build tools.
+# Intended for use with "native" mingw (where libtool itself
+# is running under the msys shell), or in the following cross-
+# build environments:
+# $build $host
+# mingw (msys) mingw [e.g. native]
+# cygwin mingw
+# *nix + wine mingw
+# where wine is equipped with the `winepath' executable.
+# In the native mingw case, the (msys) shell automatically
+# converts paths for any non-msys applications it launches,
+# but that facility isn't available from inside the cwrapper.
+# Similar accommodations are necessary for $host mingw and
+# $build cygwin. Calling this function does no harm for other
+# $host/$build combinations not listed above.
+#
+# ARG is the path (on $build) that should be converted to
+# the proper representation for $host. The result is stored
+# in $func_to_host_path_result.
+func_to_host_path ()
+{
+ func_to_host_path_result="$1"
+ if test -n "$1" ; then
+ case $host in
+ *mingw* )
+ lt_sed_naive_backslashify='s|\\\\*|\\|g;s|/|\\|g;s|\\|\\\\|g'
+ case $build in
+ *mingw* ) # actually, msys
+ # awkward: cmd appends spaces to result
+ lt_sed_strip_trailing_spaces="s/[ ]*\$//"
+ func_to_host_path_tmp1=`( cmd //c echo "$1" |\
+ $SED -e "$lt_sed_strip_trailing_spaces" ) 2>/dev/null || echo ""`
+ func_to_host_path_result=`echo "$func_to_host_path_tmp1" |\
+ $SED -e "$lt_sed_naive_backslashify"`
+ ;;
+ *cygwin* )
+ func_to_host_path_tmp1=`cygpath -w "$1"`
+ func_to_host_path_result=`echo "$func_to_host_path_tmp1" |\
+ $SED -e "$lt_sed_naive_backslashify"`
+ ;;
+ * )
+ # Unfortunately, winepath does not exit with a non-zero
+ # error code, so we are forced to check the contents of
+ # stdout. On the other hand, if the command is not
+ # found, the shell will set an exit code of 127 and print
+ # *an error message* to stdout. So we must check for both
+ # error code of zero AND non-empty stdout, which explains
+ # the odd construction:
+ func_to_host_path_tmp1=`winepath -w "$1" 2>/dev/null`
+ if test "$?" -eq 0 && test -n "${func_to_host_path_tmp1}"; then
+ func_to_host_path_result=`echo "$func_to_host_path_tmp1" |\
+ $SED -e "$lt_sed_naive_backslashify"`
+ else
+ # Allow warning below.
+ func_to_host_path_result=""
+ fi
+ ;;
+ esac
+ if test -z "$func_to_host_path_result" ; then
+ func_error "Could not determine host path corresponding to"
+ func_error " '$1'"
+ func_error "Continuing, but uninstalled executables may not work."
+ # Fallback:
+ func_to_host_path_result="$1"
+ fi
+ ;;
+ esac
+ fi
+}
+# end: func_to_host_path
+
+# func_to_host_pathlist arg
+#
+# Convert pathlists to host format when used with build tools.
+# See func_to_host_path(), above. This function supports the
+# following $build/$host combinations (but does no harm for
+# combinations not listed here):
+# $build $host
+# mingw (msys) mingw [e.g. native]
+# cygwin mingw
+# *nix + wine mingw
+#
+# Path separators are also converted from $build format to
+# $host format. If ARG begins or ends with a path separator
+# character, it is preserved (but converted to $host format)
+# on output.
+#
+# ARG is a pathlist (on $build) that should be converted to
+# the proper representation on $host. The result is stored
+# in $func_to_host_pathlist_result.
+func_to_host_pathlist ()
+{
+ func_to_host_pathlist_result="$1"
+ if test -n "$1" ; then
+ case $host in
+ *mingw* )
+ lt_sed_naive_backslashify='s|\\\\*|\\|g;s|/|\\|g;s|\\|\\\\|g'
+ # Remove leading and trailing path separator characters from
+ # ARG. msys behavior is inconsistent here, cygpath turns them
+ # into '.;' and ';.', and winepath ignores them completely.
+ func_to_host_pathlist_tmp2="$1"
+ # Once set for this call, this variable should not be
+ # reassigned. It is used in tha fallback case.
+ func_to_host_pathlist_tmp1=`echo "$func_to_host_pathlist_tmp2" |\
+ $SED -e 's|^:*||' -e 's|:*$||'`
+ case $build in
+ *mingw* ) # Actually, msys.
+ # Awkward: cmd appends spaces to result.
+ lt_sed_strip_trailing_spaces="s/[ ]*\$//"
+ func_to_host_pathlist_tmp2=`( cmd //c echo "$func_to_host_pathlist_tmp1" |\
+ $SED -e "$lt_sed_strip_trailing_spaces" ) 2>/dev/null || echo ""`
+ func_to_host_pathlist_result=`echo "$func_to_host_pathlist_tmp2" |\
+ $SED -e "$lt_sed_naive_backslashify"`
+ ;;
+ *cygwin* )
+ func_to_host_pathlist_tmp2=`cygpath -w -p "$func_to_host_pathlist_tmp1"`
+ func_to_host_pathlist_result=`echo "$func_to_host_pathlist_tmp2" |\
+ $SED -e "$lt_sed_naive_backslashify"`
+ ;;
+ * )
+ # unfortunately, winepath doesn't convert pathlists
+ func_to_host_pathlist_result=""
+ func_to_host_pathlist_oldIFS=$IFS
+ IFS=:
+ for func_to_host_pathlist_f in $func_to_host_pathlist_tmp1 ; do
+ IFS=$func_to_host_pathlist_oldIFS
+ if test -n "$func_to_host_pathlist_f" ; then
+ func_to_host_path "$func_to_host_pathlist_f"
+ if test -n "$func_to_host_path_result" ; then
+ if test -z "$func_to_host_pathlist_result" ; then
+ func_to_host_pathlist_result="$func_to_host_path_result"
+ else
+ func_to_host_pathlist_result="$func_to_host_pathlist_result;$func_to_host_path_result"
+ fi
+ fi
+ fi
+ IFS=:
+ done
+ IFS=$func_to_host_pathlist_oldIFS
+ ;;
+ esac
+ if test -z "$func_to_host_pathlist_result" ; then
+ func_error "Could not determine the host path(s) corresponding to"
+ func_error " '$1'"
+ func_error "Continuing, but uninstalled executables may not work."
+ # Fallback. This may break if $1 contains DOS-style drive
+ # specifications. The fix is not to complicate the expression
+ # below, but for the user to provide a working wine installation
+ # with winepath so that path translation in the cross-to-mingw
+ # case works properly.
+ lt_replace_pathsep_nix_to_dos="s|:|;|g"
+ func_to_host_pathlist_result=`echo "$func_to_host_pathlist_tmp1" |\
+ $SED -e "$lt_replace_pathsep_nix_to_dos"`
+ fi
+ # Now, add the leading and trailing path separators back
+ case "$1" in
+ :* ) func_to_host_pathlist_result=";$func_to_host_pathlist_result"
+ ;;
+ esac
+ case "$1" in
+ *: ) func_to_host_pathlist_result="$func_to_host_pathlist_result;"
+ ;;
+ esac
+ ;;
+ esac
+ fi
+}
+# end: func_to_host_pathlist
+
+# func_emit_cwrapperexe_src
+# emit the source code for a wrapper executable on stdout
+# Must ONLY be called from within func_mode_link because
+# it depends on a number of variable set therein.
+func_emit_cwrapperexe_src ()
+{
+ cat <<EOF
+
+/* $cwrappersource - temporary wrapper executable for $objdir/$outputname
+ Generated by $PROGRAM (GNU $PACKAGE$TIMESTAMP) $VERSION
+
+ The $output program cannot be directly executed until all the libtool
+ libraries that it depends on are installed.
+
+ This wrapper executable should never be moved out of the build directory.
+ If it is, it will not operate correctly.
+
+ Currently, it simply execs the wrapper *script* "$SHELL $output",
+ but could eventually absorb all of the scripts functionality and
+ exec $objdir/$outputname directly.
+*/
+EOF
+ cat <<"EOF"
+#include <stdio.h>
+#include <stdlib.h>
+#ifdef _MSC_VER
+# include <direct.h>
+# include <process.h>
+# include <io.h>
+# define setmode _setmode
+#else
+# include <unistd.h>
+# include <stdint.h>
+# ifdef __CYGWIN__
+# include <io.h>
+# define HAVE_SETENV
+# ifdef __STRICT_ANSI__
+char *realpath (const char *, char *);
+int putenv (char *);
+int setenv (const char *, const char *, int);
+# endif
+# endif
+#endif
+#include <malloc.h>
+#include <stdarg.h>
+#include <assert.h>
+#include <string.h>
+#include <ctype.h>
+#include <errno.h>
+#include <fcntl.h>
+#include <sys/stat.h>
+
+#if defined(PATH_MAX)
+# define LT_PATHMAX PATH_MAX
+#elif defined(MAXPATHLEN)
+# define LT_PATHMAX MAXPATHLEN
+#else
+# define LT_PATHMAX 1024
+#endif
+
+#ifndef S_IXOTH
+# define S_IXOTH 0
+#endif
+#ifndef S_IXGRP
+# define S_IXGRP 0
+#endif
+
+#ifdef _MSC_VER
+# define S_IXUSR _S_IEXEC
+# define stat _stat
+# ifndef _INTPTR_T_DEFINED
+# define intptr_t int
+# endif
+#endif
+
+#ifndef DIR_SEPARATOR
+# define DIR_SEPARATOR '/'
+# define PATH_SEPARATOR ':'
+#endif
+
+#if defined (_WIN32) || defined (__MSDOS__) || defined (__DJGPP__) || \
+ defined (__OS2__)
+# define HAVE_DOS_BASED_FILE_SYSTEM
+# define FOPEN_WB "wb"
+# ifndef DIR_SEPARATOR_2
+# define DIR_SEPARATOR_2 '\\'
+# endif
+# ifndef PATH_SEPARATOR_2
+# define PATH_SEPARATOR_2 ';'
+# endif
+#endif
+
+#ifndef DIR_SEPARATOR_2
+# define IS_DIR_SEPARATOR(ch) ((ch) == DIR_SEPARATOR)
+#else /* DIR_SEPARATOR_2 */
+# define IS_DIR_SEPARATOR(ch) \
+ (((ch) == DIR_SEPARATOR) || ((ch) == DIR_SEPARATOR_2))
+#endif /* DIR_SEPARATOR_2 */
+
+#ifndef PATH_SEPARATOR_2
+# define IS_PATH_SEPARATOR(ch) ((ch) == PATH_SEPARATOR)
+#else /* PATH_SEPARATOR_2 */
+# define IS_PATH_SEPARATOR(ch) ((ch) == PATH_SEPARATOR_2)
+#endif /* PATH_SEPARATOR_2 */
+
+#ifdef __CYGWIN__
+# define FOPEN_WB "wb"
+#endif
+
+#ifndef FOPEN_WB
+# define FOPEN_WB "w"
+#endif
+#ifndef _O_BINARY
+# define _O_BINARY 0
+#endif
+
+#define XMALLOC(type, num) ((type *) xmalloc ((num) * sizeof(type)))
+#define XFREE(stale) do { \
+ if (stale) { free ((void *) stale); stale = 0; } \
+} while (0)
+
+#undef LTWRAPPER_DEBUGPRINTF
+#if defined DEBUGWRAPPER
+# define LTWRAPPER_DEBUGPRINTF(args) ltwrapper_debugprintf args
+static void
+ltwrapper_debugprintf (const char *fmt, ...)
+{
+ va_list args;
+ va_start (args, fmt);
+ (void) vfprintf (stderr, fmt, args);
+ va_end (args);
+}
+#else
+# define LTWRAPPER_DEBUGPRINTF(args)
+#endif
+
+const char *program_name = NULL;
+
+void *xmalloc (size_t num);
+char *xstrdup (const char *string);
+const char *base_name (const char *name);
+char *find_executable (const char *wrapper);
+char *chase_symlinks (const char *pathspec);
+int make_executable (const char *path);
+int check_executable (const char *path);
+char *strendzap (char *str, const char *pat);
+void lt_fatal (const char *message, ...);
+void lt_setenv (const char *name, const char *value);
+char *lt_extend_str (const char *orig_value, const char *add, int to_end);
+void lt_opt_process_env_set (const char *arg);
+void lt_opt_process_env_prepend (const char *arg);
+void lt_opt_process_env_append (const char *arg);
+int lt_split_name_value (const char *arg, char** name, char** value);
+void lt_update_exe_path (const char *name, const char *value);
+void lt_update_lib_path (const char *name, const char *value);
+
+static const char *script_text_part1 =
+EOF
+
+ func_emit_wrapper_part1 yes |
+ $SED -e 's/\([\\"]\)/\\\1/g' \
+ -e 's/^/ "/' -e 's/$/\\n"/'
+ echo ";"
+ cat <<EOF
+
+static const char *script_text_part2 =
+EOF
+ func_emit_wrapper_part2 yes |
+ $SED -e 's/\([\\"]\)/\\\1/g' \
+ -e 's/^/ "/' -e 's/$/\\n"/'
+ echo ";"
+
+ cat <<EOF
+const char * MAGIC_EXE = "$magic_exe";
+const char * LIB_PATH_VARNAME = "$shlibpath_var";
+EOF
+
+ if test "$shlibpath_overrides_runpath" = yes && test -n "$shlibpath_var" && test -n "$temp_rpath"; then
+ func_to_host_pathlist "$temp_rpath"
+ cat <<EOF
+const char * LIB_PATH_VALUE = "$func_to_host_pathlist_result";
+EOF
+ else
+ cat <<"EOF"
+const char * LIB_PATH_VALUE = "";
+EOF
+ fi
+
+ if test -n "$dllsearchpath"; then
+ func_to_host_pathlist "$dllsearchpath:"
+ cat <<EOF
+const char * EXE_PATH_VARNAME = "PATH";
+const char * EXE_PATH_VALUE = "$func_to_host_pathlist_result";
+EOF
+ else
+ cat <<"EOF"
+const char * EXE_PATH_VARNAME = "";
+const char * EXE_PATH_VALUE = "";
+EOF
+ fi
+
+ if test "$fast_install" = yes; then
+ cat <<EOF
+const char * TARGET_PROGRAM_NAME = "lt-$outputname"; /* hopefully, no .exe */
+EOF
+ else
+ cat <<EOF
+const char * TARGET_PROGRAM_NAME = "$outputname"; /* hopefully, no .exe */
+EOF
+ fi
+
+
+ cat <<"EOF"
+
+#define LTWRAPPER_OPTION_PREFIX "--lt-"
+#define LTWRAPPER_OPTION_PREFIX_LENGTH 5
+
+static const size_t opt_prefix_len = LTWRAPPER_OPTION_PREFIX_LENGTH;
+static const char *ltwrapper_option_prefix = LTWRAPPER_OPTION_PREFIX;
+
+static const char *dumpscript_opt = LTWRAPPER_OPTION_PREFIX "dump-script";
+
+static const size_t env_set_opt_len = LTWRAPPER_OPTION_PREFIX_LENGTH + 7;
+static const char *env_set_opt = LTWRAPPER_OPTION_PREFIX "env-set";
+ /* argument is putenv-style "foo=bar", value of foo is set to bar */
+
+static const size_t env_prepend_opt_len = LTWRAPPER_OPTION_PREFIX_LENGTH + 11;
+static const char *env_prepend_opt = LTWRAPPER_OPTION_PREFIX "env-prepend";
+ /* argument is putenv-style "foo=bar", new value of foo is bar${foo} */
+
+static const size_t env_append_opt_len = LTWRAPPER_OPTION_PREFIX_LENGTH + 10;
+static const char *env_append_opt = LTWRAPPER_OPTION_PREFIX "env-append";
+ /* argument is putenv-style "foo=bar", new value of foo is ${foo}bar */
+
+int
+main (int argc, char *argv[])
+{
+ char **newargz;
+ int newargc;
+ char *tmp_pathspec;
+ char *actual_cwrapper_path;
+ char *actual_cwrapper_name;
+ char *target_name;
+ char *lt_argv_zero;
+ intptr_t rval = 127;
+
+ int i;
+
+ program_name = (char *) xstrdup (base_name (argv[0]));
+ LTWRAPPER_DEBUGPRINTF (("(main) argv[0] : %s\n", argv[0]));
+ LTWRAPPER_DEBUGPRINTF (("(main) program_name : %s\n", program_name));
+
+ /* very simple arg parsing; don't want to rely on getopt */
+ for (i = 1; i < argc; i++)
+ {
+ if (strcmp (argv[i], dumpscript_opt) == 0)
+ {
+EOF
+ case "$host" in
+ *mingw* | *cygwin* )
+ # make stdout use "unix" line endings
+ echo " setmode(1,_O_BINARY);"
+ ;;
+ esac
+
+ cat <<"EOF"
+ printf ("%s", script_text_part1);
+ printf ("%s", script_text_part2);
+ return 0;
+ }
+ }
+
+ newargz = XMALLOC (char *, argc + 1);
+ tmp_pathspec = find_executable (argv[0]);
+ if (tmp_pathspec == NULL)
+ lt_fatal ("Couldn't find %s", argv[0]);
+ LTWRAPPER_DEBUGPRINTF (("(main) found exe (before symlink chase) at : %s\n",
+ tmp_pathspec));
+
+ actual_cwrapper_path = chase_symlinks (tmp_pathspec);
+ LTWRAPPER_DEBUGPRINTF (("(main) found exe (after symlink chase) at : %s\n",
+ actual_cwrapper_path));
+ XFREE (tmp_pathspec);
+
+ actual_cwrapper_name = xstrdup( base_name (actual_cwrapper_path));
+ strendzap (actual_cwrapper_path, actual_cwrapper_name);
+
+ /* wrapper name transforms */
+ strendzap (actual_cwrapper_name, ".exe");
+ tmp_pathspec = lt_extend_str (actual_cwrapper_name, ".exe", 1);
+ XFREE (actual_cwrapper_name);
+ actual_cwrapper_name = tmp_pathspec;
+ tmp_pathspec = 0;
+
+ /* target_name transforms -- use actual target program name; might have lt- prefix */
+ target_name = xstrdup (base_name (TARGET_PROGRAM_NAME));
+ strendzap (target_name, ".exe");
+ tmp_pathspec = lt_extend_str (target_name, ".exe", 1);
+ XFREE (target_name);
+ target_name = tmp_pathspec;
+ tmp_pathspec = 0;
+
+ LTWRAPPER_DEBUGPRINTF (("(main) libtool target name: %s\n",
+ target_name));
+EOF
+
+ cat <<EOF
+ newargz[0] =
+ XMALLOC (char, (strlen (actual_cwrapper_path) +
+ strlen ("$objdir") + 1 + strlen (actual_cwrapper_name) + 1));
+ strcpy (newargz[0], actual_cwrapper_path);
+ strcat (newargz[0], "$objdir");
+ strcat (newargz[0], "/");
+EOF
+
+ cat <<"EOF"
+ /* stop here, and copy so we don't have to do this twice */
+ tmp_pathspec = xstrdup (newargz[0]);
+
+ /* do NOT want the lt- prefix here, so use actual_cwrapper_name */
+ strcat (newargz[0], actual_cwrapper_name);
+
+ /* DO want the lt- prefix here if it exists, so use target_name */
+ lt_argv_zero = lt_extend_str (tmp_pathspec, target_name, 1);
+ XFREE (tmp_pathspec);
+ tmp_pathspec = NULL;
+EOF
+
+ case $host_os in
+ mingw*)
+ cat <<"EOF"
+ {
+ char* p;
+ while ((p = strchr (newargz[0], '\\')) != NULL)
+ {
+ *p = '/';
+ }
+ while ((p = strchr (lt_argv_zero, '\\')) != NULL)
+ {
+ *p = '/';
+ }
+ }
+EOF
+ ;;
+ esac
+
+ cat <<"EOF"
+ XFREE (target_name);
+ XFREE (actual_cwrapper_path);
+ XFREE (actual_cwrapper_name);
+
+ lt_setenv ("BIN_SH", "xpg4"); /* for Tru64 */
+ lt_setenv ("DUALCASE", "1"); /* for MSK sh */
+ lt_update_lib_path (LIB_PATH_VARNAME, LIB_PATH_VALUE);
+ lt_update_exe_path (EXE_PATH_VARNAME, EXE_PATH_VALUE);
+
+ newargc=0;
+ for (i = 1; i < argc; i++)
+ {
+ if (strncmp (argv[i], env_set_opt, env_set_opt_len) == 0)
+ {
+ if (argv[i][env_set_opt_len] == '=')
+ {
+ const char *p = argv[i] + env_set_opt_len + 1;
+ lt_opt_process_env_set (p);
+ }
+ else if (argv[i][env_set_opt_len] == '\0' && i + 1 < argc)
+ {
+ lt_opt_process_env_set (argv[++i]); /* don't copy */
+ }
+ else
+ lt_fatal ("%s missing required argument", env_set_opt);
+ continue;
+ }
+ if (strncmp (argv[i], env_prepend_opt, env_prepend_opt_len) == 0)
+ {
+ if (argv[i][env_prepend_opt_len] == '=')
+ {
+ const char *p = argv[i] + env_prepend_opt_len + 1;
+ lt_opt_process_env_prepend (p);
+ }
+ else if (argv[i][env_prepend_opt_len] == '\0' && i + 1 < argc)
+ {
+ lt_opt_process_env_prepend (argv[++i]); /* don't copy */
+ }
+ else
+ lt_fatal ("%s missing required argument", env_prepend_opt);
+ continue;
+ }
+ if (strncmp (argv[i], env_append_opt, env_append_opt_len) == 0)
+ {
+ if (argv[i][env_append_opt_len] == '=')
+ {
+ const char *p = argv[i] + env_append_opt_len + 1;
+ lt_opt_process_env_append (p);
+ }
+ else if (argv[i][env_append_opt_len] == '\0' && i + 1 < argc)
+ {
+ lt_opt_process_env_append (argv[++i]); /* don't copy */
+ }
+ else
+ lt_fatal ("%s missing required argument", env_append_opt);
+ continue;
+ }
+ if (strncmp (argv[i], ltwrapper_option_prefix, opt_prefix_len) == 0)
+ {
+ /* however, if there is an option in the LTWRAPPER_OPTION_PREFIX
+ namespace, but it is not one of the ones we know about and
+ have already dealt with, above (inluding dump-script), then
+ report an error. Otherwise, targets might begin to believe
+ they are allowed to use options in the LTWRAPPER_OPTION_PREFIX
+ namespace. The first time any user complains about this, we'll
+ need to make LTWRAPPER_OPTION_PREFIX a configure-time option
+ or a configure.ac-settable value.
+ */
+ lt_fatal ("Unrecognized option in %s namespace: '%s'",
+ ltwrapper_option_prefix, argv[i]);
+ }
+ /* otherwise ... */
+ newargz[++newargc] = xstrdup (argv[i]);
+ }
+ newargz[++newargc] = NULL;
+
+ LTWRAPPER_DEBUGPRINTF (("(main) lt_argv_zero : %s\n", (lt_argv_zero ? lt_argv_zero : "<NULL>")));
+ for (i = 0; i < newargc; i++)
+ {
+ LTWRAPPER_DEBUGPRINTF (("(main) newargz[%d] : %s\n", i, (newargz[i] ? newargz[i] : "<NULL>")));
+ }
+
+EOF
+
+ case $host_os in
+ mingw*)
+ cat <<"EOF"
+ /* execv doesn't actually work on mingw as expected on unix */
+ rval = _spawnv (_P_WAIT, lt_argv_zero, (const char * const *) newargz);
+ if (rval == -1)
+ {
+ /* failed to start process */
+ LTWRAPPER_DEBUGPRINTF (("(main) failed to launch target \"%s\": errno = %d\n", lt_argv_zero, errno));
+ return 127;
+ }
+ return rval;
+EOF
+ ;;
+ *)
+ cat <<"EOF"
+ execv (lt_argv_zero, newargz);
+ return rval; /* =127, but avoids unused variable warning */
+EOF
+ ;;
+ esac
+
+ cat <<"EOF"
+}
+
+void *
+xmalloc (size_t num)
+{
+ void *p = (void *) malloc (num);
+ if (!p)
+ lt_fatal ("Memory exhausted");
+
+ return p;
+}
+
+char *
+xstrdup (const char *string)
+{
+ return string ? strcpy ((char *) xmalloc (strlen (string) + 1),
+ string) : NULL;
+}
+
+const char *
+base_name (const char *name)
+{
+ const char *base;
+
+#if defined (HAVE_DOS_BASED_FILE_SYSTEM)
+ /* Skip over the disk name in MSDOS pathnames. */
+ if (isalpha ((unsigned char) name[0]) && name[1] == ':')
+ name += 2;
+#endif
+
+ for (base = name; *name; name++)
+ if (IS_DIR_SEPARATOR (*name))
+ base = name + 1;
+ return base;
+}
+
+int
+check_executable (const char *path)
+{
+ struct stat st;
+
+ LTWRAPPER_DEBUGPRINTF (("(check_executable) : %s\n",
+ path ? (*path ? path : "EMPTY!") : "NULL!"));
+ if ((!path) || (!*path))
+ return 0;
+
+ if ((stat (path, &st) >= 0)
+ && (st.st_mode & (S_IXUSR | S_IXGRP | S_IXOTH)))
+ return 1;
+ else
+ return 0;
+}
+
+int
+make_executable (const char *path)
+{
+ int rval = 0;
+ struct stat st;
+
+ LTWRAPPER_DEBUGPRINTF (("(make_executable) : %s\n",
+ path ? (*path ? path : "EMPTY!") : "NULL!"));
+ if ((!path) || (!*path))
+ return 0;
+
+ if (stat (path, &st) >= 0)
+ {
+ rval = chmod (path, st.st_mode | S_IXOTH | S_IXGRP | S_IXUSR);
+ }
+ return rval;
+}
+
+/* Searches for the full path of the wrapper. Returns
+ newly allocated full path name if found, NULL otherwise
+ Does not chase symlinks, even on platforms that support them.
+*/
+char *
+find_executable (const char *wrapper)
+{
+ int has_slash = 0;
+ const char *p;
+ const char *p_next;
+ /* static buffer for getcwd */
+ char tmp[LT_PATHMAX + 1];
+ int tmp_len;
+ char *concat_name;
+
+ LTWRAPPER_DEBUGPRINTF (("(find_executable) : %s\n",
+ wrapper ? (*wrapper ? wrapper : "EMPTY!") : "NULL!"));
+
+ if ((wrapper == NULL) || (*wrapper == '\0'))
+ return NULL;
+
+ /* Absolute path? */
+#if defined (HAVE_DOS_BASED_FILE_SYSTEM)
+ if (isalpha ((unsigned char) wrapper[0]) && wrapper[1] == ':')
+ {
+ concat_name = xstrdup (wrapper);
+ if (check_executable (concat_name))
+ return concat_name;
+ XFREE (concat_name);
+ }
+ else
+ {
+#endif
+ if (IS_DIR_SEPARATOR (wrapper[0]))
+ {
+ concat_name = xstrdup (wrapper);
+ if (check_executable (concat_name))
+ return concat_name;
+ XFREE (concat_name);
+ }
+#if defined (HAVE_DOS_BASED_FILE_SYSTEM)
+ }
+#endif
+
+ for (p = wrapper; *p; p++)
+ if (*p == '/')
+ {
+ has_slash = 1;
+ break;
+ }
+ if (!has_slash)
+ {
+ /* no slashes; search PATH */
+ const char *path = getenv ("PATH");
+ if (path != NULL)
+ {
+ for (p = path; *p; p = p_next)
+ {
+ const char *q;
+ size_t p_len;
+ for (q = p; *q; q++)
+ if (IS_PATH_SEPARATOR (*q))
+ break;
+ p_len = q - p;
+ p_next = (*q == '\0' ? q : q + 1);
+ if (p_len == 0)
+ {
+ /* empty path: current directory */
+ if (getcwd (tmp, LT_PATHMAX) == NULL)
+ lt_fatal ("getcwd failed");
+ tmp_len = strlen (tmp);
+ concat_name =
+ XMALLOC (char, tmp_len + 1 + strlen (wrapper) + 1);
+ memcpy (concat_name, tmp, tmp_len);
+ concat_name[tmp_len] = '/';
+ strcpy (concat_name + tmp_len + 1, wrapper);
+ }
+ else
+ {
+ concat_name =
+ XMALLOC (char, p_len + 1 + strlen (wrapper) + 1);
+ memcpy (concat_name, p, p_len);
+ concat_name[p_len] = '/';
+ strcpy (concat_name + p_len + 1, wrapper);
+ }
+ if (check_executable (concat_name))
+ return concat_name;
+ XFREE (concat_name);
+ }
+ }
+ /* not found in PATH; assume curdir */
+ }
+ /* Relative path | not found in path: prepend cwd */
+ if (getcwd (tmp, LT_PATHMAX) == NULL)
+ lt_fatal ("getcwd failed");
+ tmp_len = strlen (tmp);
+ concat_name = XMALLOC (char, tmp_len + 1 + strlen (wrapper) + 1);
+ memcpy (concat_name, tmp, tmp_len);
+ concat_name[tmp_len] = '/';
+ strcpy (concat_name + tmp_len + 1, wrapper);
+
+ if (check_executable (concat_name))
+ return concat_name;
+ XFREE (concat_name);
+ return NULL;
+}
+
+char *
+chase_symlinks (const char *pathspec)
+{
+#ifndef S_ISLNK
+ return xstrdup (pathspec);
+#else
+ char buf[LT_PATHMAX];
+ struct stat s;
+ char *tmp_pathspec = xstrdup (pathspec);
+ char *p;
+ int has_symlinks = 0;
+ while (strlen (tmp_pathspec) && !has_symlinks)
+ {
+ LTWRAPPER_DEBUGPRINTF (("checking path component for symlinks: %s\n",
+ tmp_pathspec));
+ if (lstat (tmp_pathspec, &s) == 0)
+ {
+ if (S_ISLNK (s.st_mode) != 0)
+ {
+ has_symlinks = 1;
+ break;
+ }
+
+ /* search backwards for last DIR_SEPARATOR */
+ p = tmp_pathspec + strlen (tmp_pathspec) - 1;
+ while ((p > tmp_pathspec) && (!IS_DIR_SEPARATOR (*p)))
+ p--;
+ if ((p == tmp_pathspec) && (!IS_DIR_SEPARATOR (*p)))
+ {
+ /* no more DIR_SEPARATORS left */
+ break;
+ }
+ *p = '\0';
+ }
+ else
+ {
+ char *errstr = strerror (errno);
+ lt_fatal ("Error accessing file %s (%s)", tmp_pathspec, errstr);
+ }
+ }
+ XFREE (tmp_pathspec);
+
+ if (!has_symlinks)
+ {
+ return xstrdup (pathspec);
+ }
+
+ tmp_pathspec = realpath (pathspec, buf);
+ if (tmp_pathspec == 0)
+ {
+ lt_fatal ("Could not follow symlinks for %s", pathspec);
+ }
+ return xstrdup (tmp_pathspec);
+#endif
+}
+
+char *
+strendzap (char *str, const char *pat)
+{
+ size_t len, patlen;
+
+ assert (str != NULL);
+ assert (pat != NULL);
+
+ len = strlen (str);
+ patlen = strlen (pat);
+
+ if (patlen <= len)
+ {
+ str += len - patlen;
+ if (strcmp (str, pat) == 0)
+ *str = '\0';
+ }
+ return str;
+}
+
+static void
+lt_error_core (int exit_status, const char *mode,
+ const char *message, va_list ap)
+{
+ fprintf (stderr, "%s: %s: ", program_name, mode);
+ vfprintf (stderr, message, ap);
+ fprintf (stderr, ".\n");
+
+ if (exit_status >= 0)
+ exit (exit_status);
+}
+
+void
+lt_fatal (const char *message, ...)
+{
+ va_list ap;
+ va_start (ap, message);
+ lt_error_core (EXIT_FAILURE, "FATAL", message, ap);
+ va_end (ap);
+}
+
+void
+lt_setenv (const char *name, const char *value)
+{
+ LTWRAPPER_DEBUGPRINTF (("(lt_setenv) setting '%s' to '%s'\n",
+ (name ? name : "<NULL>"),
+ (value ? value : "<NULL>")));
+ {
+#ifdef HAVE_SETENV
+ /* always make a copy, for consistency with !HAVE_SETENV */
+ char *str = xstrdup (value);
+ setenv (name, str, 1);
+#else
+ int len = strlen (name) + 1 + strlen (value) + 1;
+ char *str = XMALLOC (char, len);
+ sprintf (str, "%s=%s", name, value);
+ if (putenv (str) != EXIT_SUCCESS)
+ {
+ XFREE (str);
+ }
+#endif
+ }
+}
+
+char *
+lt_extend_str (const char *orig_value, const char *add, int to_end)
+{
+ char *new_value;
+ if (orig_value && *orig_value)
+ {
+ int orig_value_len = strlen (orig_value);
+ int add_len = strlen (add);
+ new_value = XMALLOC (char, add_len + orig_value_len + 1);
+ if (to_end)
+ {
+ strcpy (new_value, orig_value);
+ strcpy (new_value + orig_value_len, add);
+ }
+ else
+ {
+ strcpy (new_value, add);
+ strcpy (new_value + add_len, orig_value);
+ }
+ }
+ else
+ {
+ new_value = xstrdup (add);
+ }
+ return new_value;
+}
+
+int
+lt_split_name_value (const char *arg, char** name, char** value)
+{
+ const char *p;
+ int len;
+ if (!arg || !*arg)
+ return 1;
+
+ p = strchr (arg, (int)'=');
+
+ if (!p)
+ return 1;
+
+ *value = xstrdup (++p);
+
+ len = strlen (arg) - strlen (*value);
+ *name = XMALLOC (char, len);
+ strncpy (*name, arg, len-1);
+ (*name)[len - 1] = '\0';
+
+ return 0;
+}
+
+void
+lt_opt_process_env_set (const char *arg)
+{
+ char *name = NULL;
+ char *value = NULL;
+
+ if (lt_split_name_value (arg, &name, &value) != 0)
+ {
+ XFREE (name);
+ XFREE (value);
+ lt_fatal ("bad argument for %s: '%s'", env_set_opt, arg);
+ }
+
+ lt_setenv (name, value);
+ XFREE (name);
+ XFREE (value);
+}
+
+void
+lt_opt_process_env_prepend (const char *arg)
+{
+ char *name = NULL;
+ char *value = NULL;
+ char *new_value = NULL;
+
+ if (lt_split_name_value (arg, &name, &value) != 0)
+ {
+ XFREE (name);
+ XFREE (value);
+ lt_fatal ("bad argument for %s: '%s'", env_prepend_opt, arg);
+ }
+
+ new_value = lt_extend_str (getenv (name), value, 0);
+ lt_setenv (name, new_value);
+ XFREE (new_value);
+ XFREE (name);
+ XFREE (value);
+}
+
+void
+lt_opt_process_env_append (const char *arg)
+{
+ char *name = NULL;
+ char *value = NULL;
+ char *new_value = NULL;
+
+ if (lt_split_name_value (arg, &name, &value) != 0)
+ {
+ XFREE (name);
+ XFREE (value);
+ lt_fatal ("bad argument for %s: '%s'", env_append_opt, arg);
+ }
+
+ new_value = lt_extend_str (getenv (name), value, 1);
+ lt_setenv (name, new_value);
+ XFREE (new_value);
+ XFREE (name);
+ XFREE (value);
+}
+
+void
+lt_update_exe_path (const char *name, const char *value)
+{
+ LTWRAPPER_DEBUGPRINTF (("(lt_update_exe_path) modifying '%s' by prepending '%s'\n",
+ (name ? name : "<NULL>"),
+ (value ? value : "<NULL>")));
+
+ if (name && *name && value && *value)
+ {
+ char *new_value = lt_extend_str (getenv (name), value, 0);
+ /* some systems can't cope with a ':'-terminated path #' */
+ int len = strlen (new_value);
+ while (((len = strlen (new_value)) > 0) && IS_PATH_SEPARATOR (new_value[len-1]))
+ {
+ new_value[len-1] = '\0';
+ }
+ lt_setenv (name, new_value);
+ XFREE (new_value);
+ }
+}
+
+void
+lt_update_lib_path (const char *name, const char *value)
+{
+ LTWRAPPER_DEBUGPRINTF (("(lt_update_lib_path) modifying '%s' by prepending '%s'\n",
+ (name ? name : "<NULL>"),
+ (value ? value : "<NULL>")));
+
+ if (name && *name && value && *value)
+ {
+ char *new_value = lt_extend_str (getenv (name), value, 0);
+ lt_setenv (name, new_value);
+ XFREE (new_value);
+ }
+}
+
+
+EOF
+}
+# end: func_emit_cwrapperexe_src
+
+# func_mode_link arg...
+func_mode_link ()
+{
+ $opt_debug
+ case $host in
+ *-*-cygwin* | *-*-mingw* | *-*-pw32* | *-*-os2* | *-cegcc*)
+ # It is impossible to link a dll without this setting, and
+ # we shouldn't force the makefile maintainer to figure out
+ # which system we are compiling for in order to pass an extra
+ # flag for every libtool invocation.
+ # allow_undefined=no
+
+ # FIXME: Unfortunately, there are problems with the above when trying
+ # to make a dll which has undefined symbols, in which case not
+ # even a static library is built. For now, we need to specify
+ # -no-undefined on the libtool link line when we can be certain
+ # that all symbols are satisfied, otherwise we get a static library.
+ allow_undefined=yes
+ ;;
+ *)
+ allow_undefined=yes
+ ;;
+ esac
+ libtool_args=$nonopt
+ base_compile="$nonopt $@"
+ compile_command=$nonopt
+ finalize_command=$nonopt
+
+ compile_rpath=
+ finalize_rpath=
+ compile_shlibpath=
+ finalize_shlibpath=
+ convenience=
+ old_convenience=
+ deplibs=
+ old_deplibs=
+ compiler_flags=
+ linker_flags=
+ dllsearchpath=
+ lib_search_path=`pwd`
+ inst_prefix_dir=
+ new_inherited_linker_flags=
+
+ avoid_version=no
+ dlfiles=
+ dlprefiles=
+ dlself=no
+ export_dynamic=no
+ export_symbols=
+ export_symbols_regex=
+ generated=
+ libobjs=
+ ltlibs=
+ module=no
+ no_install=no
+ objs=
+ non_pic_objects=
+ precious_files_regex=
+ prefer_static_libs=no
+ preload=no
+ prev=
+ prevarg=
+ release=
+ rpath=
+ xrpath=
+ perm_rpath=
+ temp_rpath=
+ thread_safe=no
+ vinfo=
+ vinfo_number=no
+ weak_libs=
+ single_module="${wl}-single_module"
+ func_infer_tag $base_compile
+
+ # We need to know -static, to get the right output filenames.
+ for arg
+ do
+ case $arg in
+ -shared)
+ test "$build_libtool_libs" != yes && \
+ func_fatal_configuration "can not build a shared library"
+ build_old_libs=no
+ break
+ ;;
+ -all-static | -static | -static-libtool-libs)
+ case $arg in
+ -all-static)
+ if test "$build_libtool_libs" = yes && test -z "$link_static_flag"; then
+ func_warning "complete static linking is impossible in this configuration"
+ fi
+ if test -n "$link_static_flag"; then
+ dlopen_self=$dlopen_self_static
+ fi
+ prefer_static_libs=yes
+ ;;
+ -static)
+ if test -z "$pic_flag" && test -n "$link_static_flag"; then
+ dlopen_self=$dlopen_self_static
+ fi
+ prefer_static_libs=built
+ ;;
+ -static-libtool-libs)
+ if test -z "$pic_flag" && test -n "$link_static_flag"; then
+ dlopen_self=$dlopen_self_static
+ fi
+ prefer_static_libs=yes
+ ;;
+ esac
+ build_libtool_libs=no
+ build_old_libs=yes
+ break
+ ;;
+ esac
+ done
+
+ # See if our shared archives depend on static archives.
+ test -n "$old_archive_from_new_cmds" && build_old_libs=yes
+
+ # Go through the arguments, transforming them on the way.
+ while test "$#" -gt 0; do
+ arg="$1"
+ shift
+ func_quote_for_eval "$arg"
+ qarg=$func_quote_for_eval_unquoted_result
+ func_append libtool_args " $func_quote_for_eval_result"
+
+ # If the previous option needs an argument, assign it.
+ if test -n "$prev"; then
+ case $prev in
+ output)
+ func_append compile_command " @OUTPUT@"
+ func_append finalize_command " @OUTPUT@"
+ ;;
+ esac
+
+ case $prev in
+ dlfiles|dlprefiles)
+ if test "$preload" = no; then
+ # Add the symbol object into the linking commands.
+ func_append compile_command " @SYMFILE@"
+ func_append finalize_command " @SYMFILE@"
+ preload=yes
+ fi
+ case $arg in
+ *.la | *.lo) ;; # We handle these cases below.
+ force)
+ if test "$dlself" = no; then
+ dlself=needless
+ export_dynamic=yes
+ fi
+ prev=
+ continue
+ ;;
+ self)
+ if test "$prev" = dlprefiles; then
+ dlself=yes
+ elif test "$prev" = dlfiles && test "$dlopen_self" != yes; then
+ dlself=yes
+ else
+ dlself=needless
+ export_dynamic=yes
+ fi
+ prev=
+ continue
+ ;;
+ *)
+ if test "$prev" = dlfiles; then
+ dlfiles="$dlfiles $arg"
+ else
+ dlprefiles="$dlprefiles $arg"
+ fi
+ prev=
+ continue
+ ;;
+ esac
+ ;;
+ expsyms)
+ export_symbols="$arg"
+ test -f "$arg" \
+ || func_fatal_error "symbol file \`$arg' does not exist"
+ prev=
+ continue
+ ;;
+ expsyms_regex)
+ export_symbols_regex="$arg"
+ prev=
+ continue
+ ;;
+ framework)
+ case $host in
+ *-*-darwin*)
+ case "$deplibs " in
+ *" $qarg.ltframework "*) ;;
+ *) deplibs="$deplibs $qarg.ltframework" # this is fixed later
+ ;;
+ esac
+ ;;
+ esac
+ prev=
+ continue
+ ;;
+ inst_prefix)
+ inst_prefix_dir="$arg"
+ prev=
+ continue
+ ;;
+ objectlist)
+ if test -f "$arg"; then
+ save_arg=$arg
+ moreargs=
+ for fil in `cat "$save_arg"`
+ do
+# moreargs="$moreargs $fil"
+ arg=$fil
+ # A libtool-controlled object.
+
+ # Check to see that this really is a libtool object.
+ if func_lalib_unsafe_p "$arg"; then
+ pic_object=
+ non_pic_object=
+
+ # Read the .lo file
+ func_source "$arg"
+
+ if test -z "$pic_object" ||
+ test -z "$non_pic_object" ||
+ test "$pic_object" = none &&
+ test "$non_pic_object" = none; then
+ func_fatal_error "cannot find name of object for \`$arg'"
+ fi
+
+ # Extract subdirectory from the argument.
+ func_dirname "$arg" "/" ""
+ xdir="$func_dirname_result"
+
+ if test "$pic_object" != none; then
+ # Prepend the subdirectory the object is found in.
+ pic_object="$xdir$pic_object"
+
+ if test "$prev" = dlfiles; then
+ if test "$build_libtool_libs" = yes && test "$dlopen_support" = yes; then
+ dlfiles="$dlfiles $pic_object"
+ prev=
+ continue
+ else
+ # If libtool objects are unsupported, then we need to preload.
+ prev=dlprefiles
+ fi
+ fi
+
+ # CHECK ME: I think I busted this. -Ossama
+ if test "$prev" = dlprefiles; then
+ # Preload the old-style object.
+ dlprefiles="$dlprefiles $pic_object"
+ prev=
+ fi
+
+ # A PIC object.
+ func_append libobjs " $pic_object"
+ arg="$pic_object"
+ fi
+
+ # Non-PIC object.
+ if test "$non_pic_object" != none; then
+ # Prepend the subdirectory the object is found in.
+ non_pic_object="$xdir$non_pic_object"
+
+ # A standard non-PIC object
+ func_append non_pic_objects " $non_pic_object"
+ if test -z "$pic_object" || test "$pic_object" = none ; then
+ arg="$non_pic_object"
+ fi
+ else
+ # If the PIC object exists, use it instead.
+ # $xdir was prepended to $pic_object above.
+ non_pic_object="$pic_object"
+ func_append non_pic_objects " $non_pic_object"
+ fi
+ else
+ # Only an error if not doing a dry-run.
+ if $opt_dry_run; then
+ # Extract subdirectory from the argument.
+ func_dirname "$arg" "/" ""
+ xdir="$func_dirname_result"
+
+ func_lo2o "$arg"
+ pic_object=$xdir$objdir/$func_lo2o_result
+ non_pic_object=$xdir$func_lo2o_result
+ func_append libobjs " $pic_object"
+ func_append non_pic_objects " $non_pic_object"
+ else
+ func_fatal_error "\`$arg' is not a valid libtool object"
+ fi
+ fi
+ done
+ else
+ func_fatal_error "link input file \`$arg' does not exist"
+ fi
+ arg=$save_arg
+ prev=
+ continue
+ ;;
+ precious_regex)
+ precious_files_regex="$arg"
+ prev=
+ continue
+ ;;
+ release)
+ release="-$arg"
+ prev=
+ continue
+ ;;
+ rpath | xrpath)
+ # We need an absolute path.
+ case $arg in
+ [\\/]* | [A-Za-z]:[\\/]*) ;;
+ *)
+ func_fatal_error "only absolute run-paths are allowed"
+ ;;
+ esac
+ if test "$prev" = rpath; then
+ case "$rpath " in
+ *" $arg "*) ;;
+ *) rpath="$rpath $arg" ;;
+ esac
+ else
+ case "$xrpath " in
+ *" $arg "*) ;;
+ *) xrpath="$xrpath $arg" ;;
+ esac
+ fi
+ prev=
+ continue
+ ;;
+ shrext)
+ shrext_cmds="$arg"
+ prev=
+ continue
+ ;;
+ weak)
+ weak_libs="$weak_libs $arg"
+ prev=
+ continue
+ ;;
+ xcclinker)
+ linker_flags="$linker_flags $qarg"
+ compiler_flags="$compiler_flags $qarg"
+ prev=
+ func_append compile_command " $qarg"
+ func_append finalize_command " $qarg"
+ continue
+ ;;
+ xcompiler)
+ compiler_flags="$compiler_flags $qarg"
+ prev=
+ func_append compile_command " $qarg"
+ func_append finalize_command " $qarg"
+ continue
+ ;;
+ xlinker)
+ linker_flags="$linker_flags $qarg"
+ compiler_flags="$compiler_flags $wl$qarg"
+ prev=
+ func_append compile_command " $wl$qarg"
+ func_append finalize_command " $wl$qarg"
+ continue
+ ;;
+ *)
+ eval "$prev=\"\$arg\""
+ prev=
+ continue
+ ;;
+ esac
+ fi # test -n "$prev"
+
+ prevarg="$arg"
+
+ case $arg in
+ -all-static)
+ if test -n "$link_static_flag"; then
+ # See comment for -static flag below, for more details.
+ func_append compile_command " $link_static_flag"
+ func_append finalize_command " $link_static_flag"
+ fi
+ continue
+ ;;
+
+ -allow-undefined)
+ # FIXME: remove this flag sometime in the future.
+ func_fatal_error "\`-allow-undefined' must not be used because it is the default"
+ ;;
+
+ -avoid-version)
+ avoid_version=yes
+ continue
+ ;;
+
+ -dlopen)
+ prev=dlfiles
+ continue
+ ;;
+
+ -dlpreopen)
+ prev=dlprefiles
+ continue
+ ;;
+
+ -export-dynamic)
+ export_dynamic=yes
+ continue
+ ;;
+
+ -export-symbols | -export-symbols-regex)
+ if test -n "$export_symbols" || test -n "$export_symbols_regex"; then
+ func_fatal_error "more than one -exported-symbols argument is not allowed"
+ fi
+ if test "X$arg" = "X-export-symbols"; then
+ prev=expsyms
+ else
+ prev=expsyms_regex
+ fi
+ continue
+ ;;
+
+ -framework)
+ prev=framework
+ continue
+ ;;
+
+ -inst-prefix-dir)
+ prev=inst_prefix
+ continue
+ ;;
+
+ # The native IRIX linker understands -LANG:*, -LIST:* and -LNO:*
+ # so, if we see these flags be careful not to treat them like -L
+ -L[A-Z][A-Z]*:*)
+ case $with_gcc/$host in
+ no/*-*-irix* | /*-*-irix*)
+ func_append compile_command " $arg"
+ func_append finalize_command " $arg"
+ ;;
+ esac
+ continue
+ ;;
+
+ -L*)
+ func_stripname '-L' '' "$arg"
+ dir=$func_stripname_result
+ if test -z "$dir"; then
+ if test "$#" -gt 0; then
+ func_fatal_error "require no space between \`-L' and \`$1'"
+ else
+ func_fatal_error "need path for \`-L' option"
+ fi
+ fi
+ # We need an absolute path.
+ case $dir in
+ [\\/]* | [A-Za-z]:[\\/]*) ;;
+ *)
+ absdir=`cd "$dir" && pwd`
+ test -z "$absdir" && \
+ func_fatal_error "cannot determine absolute directory name of \`$dir'"
+ dir="$absdir"
+ ;;
+ esac
+ case "$deplibs " in
+ *" -L$dir "*) ;;
+ *)
+ deplibs="$deplibs -L$dir"
+ lib_search_path="$lib_search_path $dir"
+ ;;
+ esac
+ case $host in
+ *-*-cygwin* | *-*-mingw* | *-*-pw32* | *-*-os2* | *-cegcc*)
+ testbindir=`$ECHO "X$dir" | $Xsed -e 's*/lib$*/bin*'`
+ case :$dllsearchpath: in
+ *":$dir:"*) ;;
+ ::) dllsearchpath=$dir;;
+ *) dllsearchpath="$dllsearchpath:$dir";;
+ esac
+ case :$dllsearchpath: in
+ *":$testbindir:"*) ;;
+ ::) dllsearchpath=$testbindir;;
+ *) dllsearchpath="$dllsearchpath:$testbindir";;
+ esac
+ ;;
+ esac
+ continue
+ ;;
+
+ -l*)
+ if test "X$arg" = "X-lc" || test "X$arg" = "X-lm"; then
+ case $host in
+ *-*-cygwin* | *-*-mingw* | *-*-pw32* | *-*-beos* | *-cegcc*)
+ # These systems don't actually have a C or math library (as such)
+ continue
+ ;;
+ *-*-os2*)
+ # These systems don't actually have a C library (as such)
+ test "X$arg" = "X-lc" && continue
+ ;;
+ *-*-openbsd* | *-*-freebsd* | *-*-dragonfly*)
+ # Do not include libc due to us having libc/libc_r.
+ test "X$arg" = "X-lc" && continue
+ ;;
+ *-*-rhapsody* | *-*-darwin1.[012])
+ # Rhapsody C and math libraries are in the System framework
+ deplibs="$deplibs System.ltframework"
+ continue
+ ;;
+ *-*-sco3.2v5* | *-*-sco5v6*)
+ # Causes problems with __ctype
+ test "X$arg" = "X-lc" && continue
+ ;;
+ *-*-sysv4.2uw2* | *-*-sysv5* | *-*-unixware* | *-*-OpenUNIX*)
+ # Compiler inserts libc in the correct place for threads to work
+ test "X$arg" = "X-lc" && continue
+ ;;
+ esac
+ elif test "X$arg" = "X-lc_r"; then
+ case $host in
+ *-*-openbsd* | *-*-freebsd* | *-*-dragonfly*)
+ # Do not include libc_r directly, use -pthread flag.
+ continue
+ ;;
+ esac
+ fi
+ deplibs="$deplibs $arg"
+ continue
+ ;;
+
+ -module)
+ module=yes
+ continue
+ ;;
+
+ # Tru64 UNIX uses -model [arg] to determine the layout of C++
+ # classes, name mangling, and exception handling.
+ # Darwin uses the -arch flag to determine output architecture.
+ -model|-arch|-isysroot)
+ compiler_flags="$compiler_flags $arg"
+ func_append compile_command " $arg"
+ func_append finalize_command " $arg"
+ prev=xcompiler
+ continue
+ ;;
+
+ -mt|-mthreads|-kthread|-Kthread|-pthread|-pthreads|--thread-safe|-threads)
+ compiler_flags="$compiler_flags $arg"
+ func_append compile_command " $arg"
+ func_append finalize_command " $arg"
+ case "$new_inherited_linker_flags " in
+ *" $arg "*) ;;
+ * ) new_inherited_linker_flags="$new_inherited_linker_flags $arg" ;;
+ esac
+ continue
+ ;;
+
+ -multi_module)
+ single_module="${wl}-multi_module"
+ continue
+ ;;
+
+ -no-fast-install)
+ fast_install=no
+ continue
+ ;;
+
+ -no-install)
+ case $host in
+ *-*-cygwin* | *-*-mingw* | *-*-pw32* | *-*-os2* | *-*-darwin* | *-cegcc*)
+ # The PATH hackery in wrapper scripts is required on Windows
+ # and Darwin in order for the loader to find any dlls it needs.
+ func_warning "\`-no-install' is ignored for $host"
+ func_warning "assuming \`-no-fast-install' instead"
+ fast_install=no
+ ;;
+ *) no_install=yes ;;
+ esac
+ continue
+ ;;
+
+ -no-undefined)
+ allow_undefined=no
+ continue
+ ;;
+
+ -objectlist)
+ prev=objectlist
+ continue
+ ;;
+
+ -o) prev=output ;;
+
+ -precious-files-regex)
+ prev=precious_regex
+ continue
+ ;;
+
+ -release)
+ prev=release
+ continue
+ ;;
+
+ -rpath)
+ prev=rpath
+ continue
+ ;;
+
+ -R)
+ prev=xrpath
+ continue
+ ;;
+
+ -R*)
+ func_stripname '-R' '' "$arg"
+ dir=$func_stripname_result
+ # We need an absolute path.
+ case $dir in
+ [\\/]* | [A-Za-z]:[\\/]*) ;;
+ *)
+ func_fatal_error "only absolute run-paths are allowed"
+ ;;
+ esac
+ case "$xrpath " in
+ *" $dir "*) ;;
+ *) xrpath="$xrpath $dir" ;;
+ esac
+ continue
+ ;;
+
+ -shared)
+ # The effects of -shared are defined in a previous loop.
+ continue
+ ;;
+
+ -shrext)
+ prev=shrext
+ continue
+ ;;
+
+ -static | -static-libtool-libs)
+ # The effects of -static are defined in a previous loop.
+ # We used to do the same as -all-static on platforms that
+ # didn't have a PIC flag, but the assumption that the effects
+ # would be equivalent was wrong. It would break on at least
+ # Digital Unix and AIX.
+ continue
+ ;;
+
+ -thread-safe)
+ thread_safe=yes
+ continue
+ ;;
+
+ -version-info)
+ prev=vinfo
+ continue
+ ;;
+
+ -version-number)
+ prev=vinfo
+ vinfo_number=yes
+ continue
+ ;;
+
+ -weak)
+ prev=weak
+ continue
+ ;;
+
+ -Wc,*)
+ func_stripname '-Wc,' '' "$arg"
+ args=$func_stripname_result
+ arg=
+ save_ifs="$IFS"; IFS=','
+ for flag in $args; do
+ IFS="$save_ifs"
+ func_quote_for_eval "$flag"
+ arg="$arg $wl$func_quote_for_eval_result"
+ compiler_flags="$compiler_flags $func_quote_for_eval_result"
+ done
+ IFS="$save_ifs"
+ func_stripname ' ' '' "$arg"
+ arg=$func_stripname_result
+ ;;
+
+ -Wl,*)
+ func_stripname '-Wl,' '' "$arg"
+ args=$func_stripname_result
+ arg=
+ save_ifs="$IFS"; IFS=','
+ for flag in $args; do
+ IFS="$save_ifs"
+ func_quote_for_eval "$flag"
+ arg="$arg $wl$func_quote_for_eval_result"
+ compiler_flags="$compiler_flags $wl$func_quote_for_eval_result"
+ linker_flags="$linker_flags $func_quote_for_eval_result"
+ done
+ IFS="$save_ifs"
+ func_stripname ' ' '' "$arg"
+ arg=$func_stripname_result
+ ;;
+
+ -Xcompiler)
+ prev=xcompiler
+ continue
+ ;;
+
+ -Xlinker)
+ prev=xlinker
+ continue
+ ;;
+
+ -XCClinker)
+ prev=xcclinker
+ continue
+ ;;
+
+ # -msg_* for osf cc
+ -msg_*)
+ func_quote_for_eval "$arg"
+ arg="$func_quote_for_eval_result"
+ ;;
+
+ # -64, -mips[0-9] enable 64-bit mode on the SGI compiler
+ # -r[0-9][0-9]* specifies the processor on the SGI compiler
+ # -xarch=*, -xtarget=* enable 64-bit mode on the Sun compiler
+ # +DA*, +DD* enable 64-bit mode on the HP compiler
+ # -q* pass through compiler args for the IBM compiler
+ # -m*, -t[45]*, -txscale* pass through architecture-specific
+ # compiler args for GCC
+ # -F/path gives path to uninstalled frameworks, gcc on darwin
+ # -p, -pg, --coverage, -fprofile-* pass through profiling flag for GCC
+ # @file GCC response files
+ -64|-mips[0-9]|-r[0-9][0-9]*|-xarch=*|-xtarget=*|+DA*|+DD*|-q*|-m*| \
+ -t[45]*|-txscale*|-p|-pg|--coverage|-fprofile-*|-F*|@*)
+ func_quote_for_eval "$arg"
+ arg="$func_quote_for_eval_result"
+ func_append compile_command " $arg"
+ func_append finalize_command " $arg"
+ compiler_flags="$compiler_flags $arg"
+ continue
+ ;;
+
+ # Some other compiler flag.
+ -* | +*)
+ func_quote_for_eval "$arg"
+ arg="$func_quote_for_eval_result"
+ ;;
+
+ *.$objext)
+ # A standard object.
+ objs="$objs $arg"
+ ;;
+
+ *.lo)
+ # A libtool-controlled object.
+
+ # Check to see that this really is a libtool object.
+ if func_lalib_unsafe_p "$arg"; then
+ pic_object=
+ non_pic_object=
+
+ # Read the .lo file
+ func_source "$arg"
+
+ if test -z "$pic_object" ||
+ test -z "$non_pic_object" ||
+ test "$pic_object" = none &&
+ test "$non_pic_object" = none; then
+ func_fatal_error "cannot find name of object for \`$arg'"
+ fi
+
+ # Extract subdirectory from the argument.
+ func_dirname "$arg" "/" ""
+ xdir="$func_dirname_result"
+
+ if test "$pic_object" != none; then
+ # Prepend the subdirectory the object is found in.
+ pic_object="$xdir$pic_object"
+
+ if test "$prev" = dlfiles; then
+ if test "$build_libtool_libs" = yes && test "$dlopen_support" = yes; then
+ dlfiles="$dlfiles $pic_object"
+ prev=
+ continue
+ else
+ # If libtool objects are unsupported, then we need to preload.
+ prev=dlprefiles
+ fi
+ fi
+
+ # CHECK ME: I think I busted this. -Ossama
+ if test "$prev" = dlprefiles; then
+ # Preload the old-style object.
+ dlprefiles="$dlprefiles $pic_object"
+ prev=
+ fi
+
+ # A PIC object.
+ func_append libobjs " $pic_object"
+ arg="$pic_object"
+ fi
+
+ # Non-PIC object.
+ if test "$non_pic_object" != none; then
+ # Prepend the subdirectory the object is found in.
+ non_pic_object="$xdir$non_pic_object"
+
+ # A standard non-PIC object
+ func_append non_pic_objects " $non_pic_object"
+ if test -z "$pic_object" || test "$pic_object" = none ; then
+ arg="$non_pic_object"
+ fi
+ else
+ # If the PIC object exists, use it instead.
+ # $xdir was prepended to $pic_object above.
+ non_pic_object="$pic_object"
+ func_append non_pic_objects " $non_pic_object"
+ fi
+ else
+ # Only an error if not doing a dry-run.
+ if $opt_dry_run; then
+ # Extract subdirectory from the argument.
+ func_dirname "$arg" "/" ""
+ xdir="$func_dirname_result"
+
+ func_lo2o "$arg"
+ pic_object=$xdir$objdir/$func_lo2o_result
+ non_pic_object=$xdir$func_lo2o_result
+ func_append libobjs " $pic_object"
+ func_append non_pic_objects " $non_pic_object"
+ else
+ func_fatal_error "\`$arg' is not a valid libtool object"
+ fi
+ fi
+ ;;
+
+ *.$libext)
+ # An archive.
+ deplibs="$deplibs $arg"
+ old_deplibs="$old_deplibs $arg"
+ continue
+ ;;
+
+ *.la)
+ # A libtool-controlled library.
+
+ if test "$prev" = dlfiles; then
+ # This library was specified with -dlopen.
+ dlfiles="$dlfiles $arg"
+ prev=
+ elif test "$prev" = dlprefiles; then
+ # The library was specified with -dlpreopen.
+ dlprefiles="$dlprefiles $arg"
+ prev=
+ else
+ deplibs="$deplibs $arg"
+ fi
+ continue
+ ;;
+
+ # Some other compiler argument.
+ *)
+ # Unknown arguments in both finalize_command and compile_command need
+ # to be aesthetically quoted because they are evaled later.
+ func_quote_for_eval "$arg"
+ arg="$func_quote_for_eval_result"
+ ;;
+ esac # arg
+
+ # Now actually substitute the argument into the commands.
+ if test -n "$arg"; then
+ func_append compile_command " $arg"
+ func_append finalize_command " $arg"
+ fi
+ done # argument parsing loop
+
+ test -n "$prev" && \
+ func_fatal_help "the \`$prevarg' option requires an argument"
+
+ if test "$export_dynamic" = yes && test -n "$export_dynamic_flag_spec"; then
+ eval arg=\"$export_dynamic_flag_spec\"
+ func_append compile_command " $arg"
+ func_append finalize_command " $arg"
+ fi
+
+ oldlibs=
+ # calculate the name of the file, without its directory
+ func_basename "$output"
+ outputname="$func_basename_result"
+ libobjs_save="$libobjs"
+
+ if test -n "$shlibpath_var"; then
+ # get the directories listed in $shlibpath_var
+ eval shlib_search_path=\`\$ECHO \"X\${$shlibpath_var}\" \| \$Xsed -e \'s/:/ /g\'\`
+ else
+ shlib_search_path=
+ fi
+ eval sys_lib_search_path=\"$sys_lib_search_path_spec\"
+ eval sys_lib_dlsearch_path=\"$sys_lib_dlsearch_path_spec\"
+
+ func_dirname "$output" "/" ""
+ output_objdir="$func_dirname_result$objdir"
+ # Create the object directory.
+ func_mkdir_p "$output_objdir"
+
+ # Determine the type of output
+ case $output in
+ "")
+ func_fatal_help "you must specify an output file"
+ ;;
+ *.$libext) linkmode=oldlib ;;
+ *.lo | *.$objext) linkmode=obj ;;
+ *.la) linkmode=lib ;;
+ *) linkmode=prog ;; # Anything else should be a program.
+ esac
+
+ specialdeplibs=
+
+ libs=
+ # Find all interdependent deplibs by searching for libraries
+ # that are linked more than once (e.g. -la -lb -la)
+ for deplib in $deplibs; do
+ if $opt_duplicate_deps ; then
+ case "$libs " in
+ *" $deplib "*) specialdeplibs="$specialdeplibs $deplib" ;;
+ esac
+ fi
+ libs="$libs $deplib"
+ done
+
+ if test "$linkmode" = lib; then
+ libs="$predeps $libs $compiler_lib_search_path $postdeps"
+
+ # Compute libraries that are listed more than once in $predeps
+ # $postdeps and mark them as special (i.e., whose duplicates are
+ # not to be eliminated).
+ pre_post_deps=
+ if $opt_duplicate_compiler_generated_deps; then
+ for pre_post_dep in $predeps $postdeps; do
+ case "$pre_post_deps " in
+ *" $pre_post_dep "*) specialdeplibs="$specialdeplibs $pre_post_deps" ;;
+ esac
+ pre_post_deps="$pre_post_deps $pre_post_dep"
+ done
+ fi
+ pre_post_deps=
+ fi
+
+ deplibs=
+ newdependency_libs=
+ newlib_search_path=
+ need_relink=no # whether we're linking any uninstalled libtool libraries
+ notinst_deplibs= # not-installed libtool libraries
+ notinst_path= # paths that contain not-installed libtool libraries
+
+ case $linkmode in
+ lib)
+ passes="conv dlpreopen link"
+ for file in $dlfiles $dlprefiles; do
+ case $file in
+ *.la) ;;
+ *)
+ func_fatal_help "libraries can \`-dlopen' only libtool libraries: $file"
+ ;;
+ esac
+ done
+ ;;
+ prog)
+ compile_deplibs=
+ finalize_deplibs=
+ alldeplibs=no
+ newdlfiles=
+ newdlprefiles=
+ passes="conv scan dlopen dlpreopen link"
+ ;;
+ *) passes="conv"
+ ;;
+ esac
+
+ for pass in $passes; do
+ # The preopen pass in lib mode reverses $deplibs; put it back here
+ # so that -L comes before libs that need it for instance...
+ if test "$linkmode,$pass" = "lib,link"; then
+ ## FIXME: Find the place where the list is rebuilt in the wrong
+ ## order, and fix it there properly
+ tmp_deplibs=
+ for deplib in $deplibs; do
+ tmp_deplibs="$deplib $tmp_deplibs"
+ done
+ deplibs="$tmp_deplibs"
+ fi
+
+ if test "$linkmode,$pass" = "lib,link" ||
+ test "$linkmode,$pass" = "prog,scan"; then
+ libs="$deplibs"
+ deplibs=
+ fi
+ if test "$linkmode" = prog; then
+ case $pass in
+ dlopen) libs="$dlfiles" ;;
+ dlpreopen) libs="$dlprefiles" ;;
+ link) libs="$deplibs %DEPLIBS% $dependency_libs" ;;
+ esac
+ fi
+ if test "$linkmode,$pass" = "lib,dlpreopen"; then
+ # Collect and forward deplibs of preopened libtool libs
+ for lib in $dlprefiles; do
+ # Ignore non-libtool-libs
+ dependency_libs=
+ case $lib in
+ *.la) func_source "$lib" ;;
+ esac
+
+ # Collect preopened libtool deplibs, except any this library
+ # has declared as weak libs
+ for deplib in $dependency_libs; do
+ deplib_base=`$ECHO "X$deplib" | $Xsed -e "$basename"`
+ case " $weak_libs " in
+ *" $deplib_base "*) ;;
+ *) deplibs="$deplibs $deplib" ;;
+ esac
+ done
+ done
+ libs="$dlprefiles"
+ fi
+ if test "$pass" = dlopen; then
+ # Collect dlpreopened libraries
+ save_deplibs="$deplibs"
+ deplibs=
+ fi
+
+ for deplib in $libs; do
+ lib=
+ found=no
+ case $deplib in
+ -mt|-mthreads|-kthread|-Kthread|-pthread|-pthreads|--thread-safe|-threads)
+ if test "$linkmode,$pass" = "prog,link"; then
+ compile_deplibs="$deplib $compile_deplibs"
+ finalize_deplibs="$deplib $finalize_deplibs"
+ else
+ compiler_flags="$compiler_flags $deplib"
+ if test "$linkmode" = lib ; then
+ case "$new_inherited_linker_flags " in
+ *" $deplib "*) ;;
+ * ) new_inherited_linker_flags="$new_inherited_linker_flags $deplib" ;;
+ esac
+ fi
+ fi
+ continue
+ ;;
+ -l*)
+ if test "$linkmode" != lib && test "$linkmode" != prog; then
+ func_warning "\`-l' is ignored for archives/objects"
+ continue
+ fi
+ func_stripname '-l' '' "$deplib"
+ name=$func_stripname_result
+ if test "$linkmode" = lib; then
+ searchdirs="$newlib_search_path $lib_search_path $compiler_lib_search_dirs $sys_lib_search_path $shlib_search_path"
+ else
+ searchdirs="$newlib_search_path $lib_search_path $sys_lib_search_path $shlib_search_path"
+ fi
+ for searchdir in $searchdirs; do
+ for search_ext in .la $std_shrext .so .a; do
+ # Search the libtool library
+ lib="$searchdir/lib${name}${search_ext}"
+ if test -f "$lib"; then
+ if test "$search_ext" = ".la"; then
+ found=yes
+ else
+ found=no
+ fi
+ break 2
+ fi
+ done
+ done
+ if test "$found" != yes; then
+ # deplib doesn't seem to be a libtool library
+ if test "$linkmode,$pass" = "prog,link"; then
+ compile_deplibs="$deplib $compile_deplibs"
+ finalize_deplibs="$deplib $finalize_deplibs"
+ else
+ deplibs="$deplib $deplibs"
+ test "$linkmode" = lib && newdependency_libs="$deplib $newdependency_libs"
+ fi
+ continue
+ else # deplib is a libtool library
+ # If $allow_libtool_libs_with_static_runtimes && $deplib is a stdlib,
+ # We need to do some special things here, and not later.
+ if test "X$allow_libtool_libs_with_static_runtimes" = "Xyes" ; then
+ case " $predeps $postdeps " in
+ *" $deplib "*)
+ if func_lalib_p "$lib"; then
+ library_names=
+ old_library=
+ func_source "$lib"
+ for l in $old_library $library_names; do
+ ll="$l"
+ done
+ if test "X$ll" = "X$old_library" ; then # only static version available
+ found=no
+ func_dirname "$lib" "" "."
+ ladir="$func_dirname_result"
+ lib=$ladir/$old_library
+ if test "$linkmode,$pass" = "prog,link"; then
+ compile_deplibs="$deplib $compile_deplibs"
+ finalize_deplibs="$deplib $finalize_deplibs"
+ else
+ deplibs="$deplib $deplibs"
+ test "$linkmode" = lib && newdependency_libs="$deplib $newdependency_libs"
+ fi
+ continue
+ fi
+ fi
+ ;;
+ *) ;;
+ esac
+ fi
+ fi
+ ;; # -l
+ *.ltframework)
+ if test "$linkmode,$pass" = "prog,link"; then
+ compile_deplibs="$deplib $compile_deplibs"
+ finalize_deplibs="$deplib $finalize_deplibs"
+ else
+ deplibs="$deplib $deplibs"
+ if test "$linkmode" = lib ; then
+ case "$new_inherited_linker_flags " in
+ *" $deplib "*) ;;
+ * ) new_inherited_linker_flags="$new_inherited_linker_flags $deplib" ;;
+ esac
+ fi
+ fi
+ continue
+ ;;
+ -L*)
+ case $linkmode in
+ lib)
+ deplibs="$deplib $deplibs"
+ test "$pass" = conv && continue
+ newdependency_libs="$deplib $newdependency_libs"
+ func_stripname '-L' '' "$deplib"
+ newlib_search_path="$newlib_search_path $func_stripname_result"
+ ;;
+ prog)
+ if test "$pass" = conv; then
+ deplibs="$deplib $deplibs"
+ continue
+ fi
+ if test "$pass" = scan; then
+ deplibs="$deplib $deplibs"
+ else
+ compile_deplibs="$deplib $compile_deplibs"
+ finalize_deplibs="$deplib $finalize_deplibs"
+ fi
+ func_stripname '-L' '' "$deplib"
+ newlib_search_path="$newlib_search_path $func_stripname_result"
+ ;;
+ *)
+ func_warning "\`-L' is ignored for archives/objects"
+ ;;
+ esac # linkmode
+ continue
+ ;; # -L
+ -R*)
+ if test "$pass" = link; then
+ func_stripname '-R' '' "$deplib"
+ dir=$func_stripname_result
+ # Make sure the xrpath contains only unique directories.
+ case "$xrpath " in
+ *" $dir "*) ;;
+ *) xrpath="$xrpath $dir" ;;
+ esac
+ fi
+ deplibs="$deplib $deplibs"
+ continue
+ ;;
+ *.la) lib="$deplib" ;;
+ *.$libext)
+ if test "$pass" = conv; then
+ deplibs="$deplib $deplibs"
+ continue
+ fi
+ case $linkmode in
+ lib)
+ # Linking convenience modules into shared libraries is allowed,
+ # but linking other static libraries is non-portable.
+ case " $dlpreconveniencelibs " in
+ *" $deplib "*) ;;
+ *)
+ valid_a_lib=no
+ case $deplibs_check_method in
+ match_pattern*)
+ set dummy $deplibs_check_method; shift
+ match_pattern_regex=`expr "$deplibs_check_method" : "$1 \(.*\)"`
+ if eval "\$ECHO \"X$deplib\"" 2>/dev/null | $Xsed -e 10q \
+ | $EGREP "$match_pattern_regex" > /dev/null; then
+ valid_a_lib=yes
+ fi
+ ;;
+ pass_all)
+ valid_a_lib=yes
+ ;;
+ esac
+ if test "$valid_a_lib" != yes; then
+ $ECHO
+ $ECHO "*** Warning: Trying to link with static lib archive $deplib."
+ $ECHO "*** I have the capability to make that library automatically link in when"
+ $ECHO "*** you link to this library. But I can only do this if you have a"
+ $ECHO "*** shared version of the library, which you do not appear to have"
+ $ECHO "*** because the file extensions .$libext of this argument makes me believe"
+ $ECHO "*** that it is just a static archive that I should not use here."
+ else
+ $ECHO
+ $ECHO "*** Warning: Linking the shared library $output against the"
+ $ECHO "*** static library $deplib is not portable!"
+ deplibs="$deplib $deplibs"
+ fi
+ ;;
+ esac
+ continue
+ ;;
+ prog)
+ if test "$pass" != link; then
+ deplibs="$deplib $deplibs"
+ else
+ compile_deplibs="$deplib $compile_deplibs"
+ finalize_deplibs="$deplib $finalize_deplibs"
+ fi
+ continue
+ ;;
+ esac # linkmode
+ ;; # *.$libext
+ *.lo | *.$objext)
+ if test "$pass" = conv; then
+ deplibs="$deplib $deplibs"
+ elif test "$linkmode" = prog; then
+ if test "$pass" = dlpreopen || test "$dlopen_support" != yes || test "$build_libtool_libs" = no; then
+ # If there is no dlopen support or we're linking statically,
+ # we need to preload.
+ newdlprefiles="$newdlprefiles $deplib"
+ compile_deplibs="$deplib $compile_deplibs"
+ finalize_deplibs="$deplib $finalize_deplibs"
+ else
+ newdlfiles="$newdlfiles $deplib"
+ fi
+ fi
+ continue
+ ;;
+ %DEPLIBS%)
+ alldeplibs=yes
+ continue
+ ;;
+ esac # case $deplib
+
+ if test "$found" = yes || test -f "$lib"; then :
+ else
+ func_fatal_error "cannot find the library \`$lib' or unhandled argument \`$deplib'"
+ fi
+
+ # Check to see that this really is a libtool archive.
+ func_lalib_unsafe_p "$lib" \
+ || func_fatal_error "\`$lib' is not a valid libtool archive"
+
+ func_dirname "$lib" "" "."
+ ladir="$func_dirname_result"
+
+ dlname=
+ dlopen=
+ dlpreopen=
+ libdir=
+ library_names=
+ old_library=
+ inherited_linker_flags=
+ # If the library was installed with an old release of libtool,
+ # it will not redefine variables installed, or shouldnotlink
+ installed=yes
+ shouldnotlink=no
+ avoidtemprpath=
+
+
+ # Read the .la file
+ func_source "$lib"
+
+ # Convert "-framework foo" to "foo.ltframework"
+ if test -n "$inherited_linker_flags"; then
+ tmp_inherited_linker_flags=`$ECHO "X$inherited_linker_flags" | $Xsed -e 's/-framework \([^ $]*\)/\1.ltframework/g'`
+ for tmp_inherited_linker_flag in $tmp_inherited_linker_flags; do
+ case " $new_inherited_linker_flags " in
+ *" $tmp_inherited_linker_flag "*) ;;
+ *) new_inherited_linker_flags="$new_inherited_linker_flags $tmp_inherited_linker_flag";;
+ esac
+ done
+ fi
+ dependency_libs=`$ECHO "X $dependency_libs" | $Xsed -e 's% \([^ $]*\).ltframework% -framework \1%g'`
+ if test "$linkmode,$pass" = "lib,link" ||
+ test "$linkmode,$pass" = "prog,scan" ||
+ { test "$linkmode" != prog && test "$linkmode" != lib; }; then
+ test -n "$dlopen" && dlfiles="$dlfiles $dlopen"
+ test -n "$dlpreopen" && dlprefiles="$dlprefiles $dlpreopen"
+ fi
+
+ if test "$pass" = conv; then
+ # Only check for convenience libraries
+ deplibs="$lib $deplibs"
+ if test -z "$libdir"; then
+ if test -z "$old_library"; then
+ func_fatal_error "cannot find name of link library for \`$lib'"
+ fi
+ # It is a libtool convenience library, so add in its objects.
+ convenience="$convenience $ladir/$objdir/$old_library"
+ old_convenience="$old_convenience $ladir/$objdir/$old_library"
+ elif test "$linkmode" != prog && test "$linkmode" != lib; then
+ func_fatal_error "\`$lib' is not a convenience library"
+ fi
+ tmp_libs=
+ for deplib in $dependency_libs; do
+ deplibs="$deplib $deplibs"
+ if $opt_duplicate_deps ; then
+ case "$tmp_libs " in
+ *" $deplib "*) specialdeplibs="$specialdeplibs $deplib" ;;
+ esac
+ fi
+ tmp_libs="$tmp_libs $deplib"
+ done
+ continue
+ fi # $pass = conv
+
+
+ # Get the name of the library we link against.
+ linklib=
+ for l in $old_library $library_names; do
+ linklib="$l"
+ done
+ if test -z "$linklib"; then
+ func_fatal_error "cannot find name of link library for \`$lib'"
+ fi
+
+ # This library was specified with -dlopen.
+ if test "$pass" = dlopen; then
+ if test -z "$libdir"; then
+ func_fatal_error "cannot -dlopen a convenience library: \`$lib'"
+ fi
+ if test -z "$dlname" ||
+ test "$dlopen_support" != yes ||
+ test "$build_libtool_libs" = no; then
+ # If there is no dlname, no dlopen support or we're linking
+ # statically, we need to preload. We also need to preload any
+ # dependent libraries so libltdl's deplib preloader doesn't
+ # bomb out in the load deplibs phase.
+ dlprefiles="$dlprefiles $lib $dependency_libs"
+ else
+ newdlfiles="$newdlfiles $lib"
+ fi
+ continue
+ fi # $pass = dlopen
+
+ # We need an absolute path.
+ case $ladir in
+ [\\/]* | [A-Za-z]:[\\/]*) abs_ladir="$ladir" ;;
+ *)
+ abs_ladir=`cd "$ladir" && pwd`
+ if test -z "$abs_ladir"; then
+ func_warning "cannot determine absolute directory name of \`$ladir'"
+ func_warning "passing it literally to the linker, although it might fail"
+ abs_ladir="$ladir"
+ fi
+ ;;
+ esac
+ func_basename "$lib"
+ laname="$func_basename_result"
+
+ # Find the relevant object directory and library name.
+ if test "X$installed" = Xyes; then
+ if test ! -f "$libdir/$linklib" && test -f "$abs_ladir/$linklib"; then
+ func_warning "library \`$lib' was moved."
+ dir="$ladir"
+ absdir="$abs_ladir"
+ libdir="$abs_ladir"
+ else
+ dir="$libdir"
+ absdir="$libdir"
+ fi
+ test "X$hardcode_automatic" = Xyes && avoidtemprpath=yes
+ else
+ if test ! -f "$ladir/$objdir/$linklib" && test -f "$abs_ladir/$linklib"; then
+ dir="$ladir"
+ absdir="$abs_ladir"
+ # Remove this search path later
+ notinst_path="$notinst_path $abs_ladir"
+ else
+ dir="$ladir/$objdir"
+ absdir="$abs_ladir/$objdir"
+ # Remove this search path later
+ notinst_path="$notinst_path $abs_ladir"
+ fi
+ fi # $installed = yes
+ func_stripname 'lib' '.la' "$laname"
+ name=$func_stripname_result
+
+ # This library was specified with -dlpreopen.
+ if test "$pass" = dlpreopen; then
+ if test -z "$libdir" && test "$linkmode" = prog; then
+ func_fatal_error "only libraries may -dlpreopen a convenience library: \`$lib'"
+ fi
+ # Prefer using a static library (so that no silly _DYNAMIC symbols
+ # are required to link).
+ if test -n "$old_library"; then
+ newdlprefiles="$newdlprefiles $dir/$old_library"
+ # Keep a list of preopened convenience libraries to check
+ # that they are being used correctly in the link pass.
+ test -z "$libdir" && \
+ dlpreconveniencelibs="$dlpreconveniencelibs $dir/$old_library"
+ # Otherwise, use the dlname, so that lt_dlopen finds it.
+ elif test -n "$dlname"; then
+ newdlprefiles="$newdlprefiles $dir/$dlname"
+ else
+ newdlprefiles="$newdlprefiles $dir/$linklib"
+ fi
+ fi # $pass = dlpreopen
+
+ if test -z "$libdir"; then
+ # Link the convenience library
+ if test "$linkmode" = lib; then
+ deplibs="$dir/$old_library $deplibs"
+ elif test "$linkmode,$pass" = "prog,link"; then
+ compile_deplibs="$dir/$old_library $compile_deplibs"
+ finalize_deplibs="$dir/$old_library $finalize_deplibs"
+ else
+ deplibs="$lib $deplibs" # used for prog,scan pass
+ fi
+ continue
+ fi
+
+
+ if test "$linkmode" = prog && test "$pass" != link; then
+ newlib_search_path="$newlib_search_path $ladir"
+ deplibs="$lib $deplibs"
+
+ linkalldeplibs=no
+ if test "$link_all_deplibs" != no || test -z "$library_names" ||
+ test "$build_libtool_libs" = no; then
+ linkalldeplibs=yes
+ fi
+
+ tmp_libs=
+ for deplib in $dependency_libs; do
+ case $deplib in
+ -L*) func_stripname '-L' '' "$deplib"
+ newlib_search_path="$newlib_search_path $func_stripname_result"
+ ;;
+ esac
+ # Need to link against all dependency_libs?
+ if test "$linkalldeplibs" = yes; then
+ deplibs="$deplib $deplibs"
+ else
+ # Need to hardcode shared library paths
+ # or/and link against static libraries
+ newdependency_libs="$deplib $newdependency_libs"
+ fi
+ if $opt_duplicate_deps ; then
+ case "$tmp_libs " in
+ *" $deplib "*) specialdeplibs="$specialdeplibs $deplib" ;;
+ esac
+ fi
+ tmp_libs="$tmp_libs $deplib"
+ done # for deplib
+ continue
+ fi # $linkmode = prog...
+
+ if test "$linkmode,$pass" = "prog,link"; then
+ if test -n "$library_names" &&
+ { { test "$prefer_static_libs" = no ||
+ test "$prefer_static_libs,$installed" = "built,yes"; } ||
+ test -z "$old_library"; }; then
+ # We need to hardcode the library path
+ if test -n "$shlibpath_var" && test -z "$avoidtemprpath" ; then
+ # Make sure the rpath contains only unique directories.
+ case "$temp_rpath:" in
+ *"$absdir:"*) ;;
+ *) temp_rpath="$temp_rpath$absdir:" ;;
+ esac
+ fi
+
+ # Hardcode the library path.
+ # Skip directories that are in the system default run-time
+ # search path.
+ case " $sys_lib_dlsearch_path " in
+ *" $absdir "*) ;;
+ *)
+ case "$compile_rpath " in
+ *" $absdir "*) ;;
+ *) compile_rpath="$compile_rpath $absdir"
+ esac
+ ;;
+ esac
+ case " $sys_lib_dlsearch_path " in
+ *" $libdir "*) ;;
+ *)
+ case "$finalize_rpath " in
+ *" $libdir "*) ;;
+ *) finalize_rpath="$finalize_rpath $libdir"
+ esac
+ ;;
+ esac
+ fi # $linkmode,$pass = prog,link...
+
+ if test "$alldeplibs" = yes &&
+ { test "$deplibs_check_method" = pass_all ||
+ { test "$build_libtool_libs" = yes &&
+ test -n "$library_names"; }; }; then
+ # We only need to search for static libraries
+ continue
+ fi
+ fi
+
+ link_static=no # Whether the deplib will be linked statically
+ use_static_libs=$prefer_static_libs
+ if test "$use_static_libs" = built && test "$installed" = yes; then
+ use_static_libs=no
+ fi
+ if test -n "$library_names" &&
+ { test "$use_static_libs" = no || test -z "$old_library"; }; then
+ case $host in
+ *cygwin* | *mingw* | *cegcc*)
+ # No point in relinking DLLs because paths are not encoded
+ notinst_deplibs="$notinst_deplibs $lib"
+ need_relink=no
+ ;;
+ *)
+ if test "$installed" = no; then
+ notinst_deplibs="$notinst_deplibs $lib"
+ need_relink=yes
+ fi
+ ;;
+ esac
+ # This is a shared library
+
+ # Warn about portability, can't link against -module's on some
+ # systems (darwin). Don't bleat about dlopened modules though!
+ dlopenmodule=""
+ for dlpremoduletest in $dlprefiles; do
+ if test "X$dlpremoduletest" = "X$lib"; then
+ dlopenmodule="$dlpremoduletest"
+ break
+ fi
+ done
+ if test -z "$dlopenmodule" && test "$shouldnotlink" = yes && test "$pass" = link; then
+ $ECHO
+ if test "$linkmode" = prog; then
+ $ECHO "*** Warning: Linking the executable $output against the loadable module"
+ else
+ $ECHO "*** Warning: Linking the shared library $output against the loadable module"
+ fi
+ $ECHO "*** $linklib is not portable!"
+ fi
+ if test "$linkmode" = lib &&
+ test "$hardcode_into_libs" = yes; then
+ # Hardcode the library path.
+ # Skip directories that are in the system default run-time
+ # search path.
+ case " $sys_lib_dlsearch_path " in
+ *" $absdir "*) ;;
+ *)
+ case "$compile_rpath " in
+ *" $absdir "*) ;;
+ *) compile_rpath="$compile_rpath $absdir"
+ esac
+ ;;
+ esac
+ case " $sys_lib_dlsearch_path " in
+ *" $libdir "*) ;;
+ *)
+ case "$finalize_rpath " in
+ *" $libdir "*) ;;
+ *) finalize_rpath="$finalize_rpath $libdir"
+ esac
+ ;;
+ esac
+ fi
+
+ if test -n "$old_archive_from_expsyms_cmds"; then
+ # figure out the soname
+ set dummy $library_names
+ shift
+ realname="$1"
+ shift
+ libname=`eval "\\$ECHO \"$libname_spec\""`
+ # use dlname if we got it. it's perfectly good, no?
+ if test -n "$dlname"; then
+ soname="$dlname"
+ elif test -n "$soname_spec"; then
+ # bleh windows
+ case $host in
+ *cygwin* | mingw* | *cegcc*)
+ func_arith $current - $age
+ major=$func_arith_result
+ versuffix="-$major"
+ ;;
+ esac
+ eval soname=\"$soname_spec\"
+ else
+ soname="$realname"
+ fi
+
+ # Make a new name for the extract_expsyms_cmds to use
+ soroot="$soname"
+ func_basename "$soroot"
+ soname="$func_basename_result"
+ func_stripname 'lib' '.dll' "$soname"
+ newlib=libimp-$func_stripname_result.a
+
+ # If the library has no export list, then create one now
+ if test -f "$output_objdir/$soname-def"; then :
+ else
+ func_verbose "extracting exported symbol list from \`$soname'"
+ func_execute_cmds "$extract_expsyms_cmds" 'exit $?'
+ fi
+
+ # Create $newlib
+ if test -f "$output_objdir/$newlib"; then :; else
+ func_verbose "generating import library for \`$soname'"
+ func_execute_cmds "$old_archive_from_expsyms_cmds" 'exit $?'
+ fi
+ # make sure the library variables are pointing to the new library
+ dir=$output_objdir
+ linklib=$newlib
+ fi # test -n "$old_archive_from_expsyms_cmds"
+
+ if test "$linkmode" = prog || test "$mode" != relink; then
+ add_shlibpath=
+ add_dir=
+ add=
+ lib_linked=yes
+ case $hardcode_action in
+ immediate | unsupported)
+ if test "$hardcode_direct" = no; then
+ add="$dir/$linklib"
+ case $host in
+ *-*-sco3.2v5.0.[024]*) add_dir="-L$dir" ;;
+ *-*-sysv4*uw2*) add_dir="-L$dir" ;;
+ *-*-sysv5OpenUNIX* | *-*-sysv5UnixWare7.[01].[10]* | \
+ *-*-unixware7*) add_dir="-L$dir" ;;
+ *-*-darwin* )
+ # if the lib is a (non-dlopened) module then we can not
+ # link against it, someone is ignoring the earlier warnings
+ if /usr/bin/file -L $add 2> /dev/null |
+ $GREP ": [^:]* bundle" >/dev/null ; then
+ if test "X$dlopenmodule" != "X$lib"; then
+ $ECHO "*** Warning: lib $linklib is a module, not a shared library"
+ if test -z "$old_library" ; then
+ $ECHO
+ $ECHO "*** And there doesn't seem to be a static archive available"
+ $ECHO "*** The link will probably fail, sorry"
+ else
+ add="$dir/$old_library"
+ fi
+ elif test -n "$old_library"; then
+ add="$dir/$old_library"
+ fi
+ fi
+ esac
+ elif test "$hardcode_minus_L" = no; then
+ case $host in
+ *-*-sunos*) add_shlibpath="$dir" ;;
+ esac
+ add_dir="-L$dir"
+ add="-l$name"
+ elif test "$hardcode_shlibpath_var" = no; then
+ add_shlibpath="$dir"
+ add="-l$name"
+ else
+ lib_linked=no
+ fi
+ ;;
+ relink)
+ if test "$hardcode_direct" = yes &&
+ test "$hardcode_direct_absolute" = no; then
+ add="$dir/$linklib"
+ elif test "$hardcode_minus_L" = yes; then
+ add_dir="-L$dir"
+ # Try looking first in the location we're being installed to.
+ if test -n "$inst_prefix_dir"; then
+ case $libdir in
+ [\\/]*)
+ add_dir="$add_dir -L$inst_prefix_dir$libdir"
+ ;;
+ esac
+ fi
+ add="-l$name"
+ elif test "$hardcode_shlibpath_var" = yes; then
+ add_shlibpath="$dir"
+ add="-l$name"
+ else
+ lib_linked=no
+ fi
+ ;;
+ *) lib_linked=no ;;
+ esac
+
+ if test "$lib_linked" != yes; then
+ func_fatal_configuration "unsupported hardcode properties"
+ fi
+
+ if test -n "$add_shlibpath"; then
+ case :$compile_shlibpath: in
+ *":$add_shlibpath:"*) ;;
+ *) compile_shlibpath="$compile_shlibpath$add_shlibpath:" ;;
+ esac
+ fi
+ if test "$linkmode" = prog; then
+ test -n "$add_dir" && compile_deplibs="$add_dir $compile_deplibs"
+ test -n "$add" && compile_deplibs="$add $compile_deplibs"
+ else
+ test -n "$add_dir" && deplibs="$add_dir $deplibs"
+ test -n "$add" && deplibs="$add $deplibs"
+ if test "$hardcode_direct" != yes &&
+ test "$hardcode_minus_L" != yes &&
+ test "$hardcode_shlibpath_var" = yes; then
+ case :$finalize_shlibpath: in
+ *":$libdir:"*) ;;
+ *) finalize_shlibpath="$finalize_shlibpath$libdir:" ;;
+ esac
+ fi
+ fi
+ fi
+
+ if test "$linkmode" = prog || test "$mode" = relink; then
+ add_shlibpath=
+ add_dir=
+ add=
+ # Finalize command for both is simple: just hardcode it.
+ if test "$hardcode_direct" = yes &&
+ test "$hardcode_direct_absolute" = no; then
+ add="$libdir/$linklib"
+ elif test "$hardcode_minus_L" = yes; then
+ add_dir="-L$libdir"
+ add="-l$name"
+ elif test "$hardcode_shlibpath_var" = yes; then
+ case :$finalize_shlibpath: in
+ *":$libdir:"*) ;;
+ *) finalize_shlibpath="$finalize_shlibpath$libdir:" ;;
+ esac
+ add="-l$name"
+ elif test "$hardcode_automatic" = yes; then
+ if test -n "$inst_prefix_dir" &&
+ test -f "$inst_prefix_dir$libdir/$linklib" ; then
+ add="$inst_prefix_dir$libdir/$linklib"
+ else
+ add="$libdir/$linklib"
+ fi
+ else
+ # We cannot seem to hardcode it, guess we'll fake it.
+ add_dir="-L$libdir"
+ # Try looking first in the location we're being installed to.
+ if test -n "$inst_prefix_dir"; then
+ case $libdir in
+ [\\/]*)
+ add_dir="$add_dir -L$inst_prefix_dir$libdir"
+ ;;
+ esac
+ fi
+ add="-l$name"
+ fi
+
+ if test "$linkmode" = prog; then
+ test -n "$add_dir" && finalize_deplibs="$add_dir $finalize_deplibs"
+ test -n "$add" && finalize_deplibs="$add $finalize_deplibs"
+ else
+ test -n "$add_dir" && deplibs="$add_dir $deplibs"
+ test -n "$add" && deplibs="$add $deplibs"
+ fi
+ fi
+ elif test "$linkmode" = prog; then
+ # Here we assume that one of hardcode_direct or hardcode_minus_L
+ # is not unsupported. This is valid on all known static and
+ # shared platforms.
+ if test "$hardcode_direct" != unsupported; then
+ test -n "$old_library" && linklib="$old_library"
+ compile_deplibs="$dir/$linklib $compile_deplibs"
+ finalize_deplibs="$dir/$linklib $finalize_deplibs"
+ else
+ compile_deplibs="-l$name -L$dir $compile_deplibs"
+ finalize_deplibs="-l$name -L$dir $finalize_deplibs"
+ fi
+ elif test "$build_libtool_libs" = yes; then
+ # Not a shared library
+ if test "$deplibs_check_method" != pass_all; then
+ # We're trying link a shared library against a static one
+ # but the system doesn't support it.
+
+ # Just print a warning and add the library to dependency_libs so
+ # that the program can be linked against the static library.
+ $ECHO
+ $ECHO "*** Warning: This system can not link to static lib archive $lib."
+ $ECHO "*** I have the capability to make that library automatically link in when"
+ $ECHO "*** you link to this library. But I can only do this if you have a"
+ $ECHO "*** shared version of the library, which you do not appear to have."
+ if test "$module" = yes; then
+ $ECHO "*** But as you try to build a module library, libtool will still create "
+ $ECHO "*** a static module, that should work as long as the dlopening application"
+ $ECHO "*** is linked with the -dlopen flag to resolve symbols at runtime."
+ if test -z "$global_symbol_pipe"; then
+ $ECHO
+ $ECHO "*** However, this would only work if libtool was able to extract symbol"
+ $ECHO "*** lists from a program, using \`nm' or equivalent, but libtool could"
+ $ECHO "*** not find such a program. So, this module is probably useless."
+ $ECHO "*** \`nm' from GNU binutils and a full rebuild may help."
+ fi
+ if test "$build_old_libs" = no; then
+ build_libtool_libs=module
+ build_old_libs=yes
+ else
+ build_libtool_libs=no
+ fi
+ fi
+ else
+ deplibs="$dir/$old_library $deplibs"
+ link_static=yes
+ fi
+ fi # link shared/static library?
+
+ if test "$linkmode" = lib; then
+ if test -n "$dependency_libs" &&
+ { test "$hardcode_into_libs" != yes ||
+ test "$build_old_libs" = yes ||
+ test "$link_static" = yes; }; then
+ # Extract -R from dependency_libs
+ temp_deplibs=
+ for libdir in $dependency_libs; do
+ case $libdir in
+ -R*) func_stripname '-R' '' "$libdir"
+ temp_xrpath=$func_stripname_result
+ case " $xrpath " in
+ *" $temp_xrpath "*) ;;
+ *) xrpath="$xrpath $temp_xrpath";;
+ esac;;
+ *) temp_deplibs="$temp_deplibs $libdir";;
+ esac
+ done
+ dependency_libs="$temp_deplibs"
+ fi
+
+ newlib_search_path="$newlib_search_path $absdir"
+ # Link against this library
+ test "$link_static" = no && newdependency_libs="$abs_ladir/$laname $newdependency_libs"
+ # ... and its dependency_libs
+ tmp_libs=
+ for deplib in $dependency_libs; do
+ newdependency_libs="$deplib $newdependency_libs"
+ if $opt_duplicate_deps ; then
+ case "$tmp_libs " in
+ *" $deplib "*) specialdeplibs="$specialdeplibs $deplib" ;;
+ esac
+ fi
+ tmp_libs="$tmp_libs $deplib"
+ done
+
+ if test "$link_all_deplibs" != no; then
+ # Add the search paths of all dependency libraries
+ for deplib in $dependency_libs; do
+ case $deplib in
+ -L*) path="$deplib" ;;
+ *.la)
+ func_dirname "$deplib" "" "."
+ dir="$func_dirname_result"
+ # We need an absolute path.
+ case $dir in
+ [\\/]* | [A-Za-z]:[\\/]*) absdir="$dir" ;;
+ *)
+ absdir=`cd "$dir" && pwd`
+ if test -z "$absdir"; then
+ func_warning "cannot determine absolute directory name of \`$dir'"
+ absdir="$dir"
+ fi
+ ;;
+ esac
+ if $GREP "^installed=no" $deplib > /dev/null; then
+ case $host in
+ *-*-darwin*)
+ depdepl=
+ eval deplibrary_names=`${SED} -n -e 's/^library_names=\(.*\)$/\1/p' $deplib`
+ if test -n "$deplibrary_names" ; then
+ for tmp in $deplibrary_names ; do
+ depdepl=$tmp
+ done
+ if test -f "$absdir/$objdir/$depdepl" ; then
+ depdepl="$absdir/$objdir/$depdepl"
+ darwin_install_name=`${OTOOL} -L $depdepl | awk '{if (NR == 2) {print $1;exit}}'`
+ if test -z "$darwin_install_name"; then
+ darwin_install_name=`${OTOOL64} -L $depdepl | awk '{if (NR == 2) {print $1;exit}}'`
+ fi
+ compiler_flags="$compiler_flags ${wl}-dylib_file ${wl}${darwin_install_name}:${depdepl}"
+ linker_flags="$linker_flags -dylib_file ${darwin_install_name}:${depdepl}"
+ path=
+ fi
+ fi
+ ;;
+ *)
+ path="-L$absdir/$objdir"
+ ;;
+ esac
+ else
+ eval libdir=`${SED} -n -e 's/^libdir=\(.*\)$/\1/p' $deplib`
+ test -z "$libdir" && \
+ func_fatal_error "\`$deplib' is not a valid libtool archive"
+ test "$absdir" != "$libdir" && \
+ func_warning "\`$deplib' seems to be moved"
+
+ path="-L$absdir"
+ fi
+ ;;
+ esac
+ case " $deplibs " in
+ *" $path "*) ;;
+ *) deplibs="$path $deplibs" ;;
+ esac
+ done
+ fi # link_all_deplibs != no
+ fi # linkmode = lib
+ done # for deplib in $libs
+ if test "$pass" = link; then
+ if test "$linkmode" = "prog"; then
+ compile_deplibs="$new_inherited_linker_flags $compile_deplibs"
+ finalize_deplibs="$new_inherited_linker_flags $finalize_deplibs"
+ else
+ compiler_flags="$compiler_flags "`$ECHO "X $new_inherited_linker_flags" | $Xsed -e 's% \([^ $]*\).ltframework% -framework \1%g'`
+ fi
+ fi
+ dependency_libs="$newdependency_libs"
+ if test "$pass" = dlpreopen; then
+ # Link the dlpreopened libraries before other libraries
+ for deplib in $save_deplibs; do
+ deplibs="$deplib $deplibs"
+ done
+ fi
+ if test "$pass" != dlopen; then
+ if test "$pass" != conv; then
+ # Make sure lib_search_path contains only unique directories.
+ lib_search_path=
+ for dir in $newlib_search_path; do
+ case "$lib_search_path " in
+ *" $dir "*) ;;
+ *) lib_search_path="$lib_search_path $dir" ;;
+ esac
+ done
+ newlib_search_path=
+ fi
+
+ if test "$linkmode,$pass" != "prog,link"; then
+ vars="deplibs"
+ else
+ vars="compile_deplibs finalize_deplibs"
+ fi
+ for var in $vars dependency_libs; do
+ # Add libraries to $var in reverse order
+ eval tmp_libs=\"\$$var\"
+ new_libs=
+ for deplib in $tmp_libs; do
+ # FIXME: Pedantically, this is the right thing to do, so
+ # that some nasty dependency loop isn't accidentally
+ # broken:
+ #new_libs="$deplib $new_libs"
+ # Pragmatically, this seems to cause very few problems in
+ # practice:
+ case $deplib in
+ -L*) new_libs="$deplib $new_libs" ;;
+ -R*) ;;
+ *)
+ # And here is the reason: when a library appears more
+ # than once as an explicit dependence of a library, or
+ # is implicitly linked in more than once by the
+ # compiler, it is considered special, and multiple
+ # occurrences thereof are not removed. Compare this
+ # with having the same library being listed as a
+ # dependency of multiple other libraries: in this case,
+ # we know (pedantically, we assume) the library does not
+ # need to be listed more than once, so we keep only the
+ # last copy. This is not always right, but it is rare
+ # enough that we require users that really mean to play
+ # such unportable linking tricks to link the library
+ # using -Wl,-lname, so that libtool does not consider it
+ # for duplicate removal.
+ case " $specialdeplibs " in
+ *" $deplib "*) new_libs="$deplib $new_libs" ;;
+ *)
+ case " $new_libs " in
+ *" $deplib "*) ;;
+ *) new_libs="$deplib $new_libs" ;;
+ esac
+ ;;
+ esac
+ ;;
+ esac
+ done
+ tmp_libs=
+ for deplib in $new_libs; do
+ case $deplib in
+ -L*)
+ case " $tmp_libs " in
+ *" $deplib "*) ;;
+ *) tmp_libs="$tmp_libs $deplib" ;;
+ esac
+ ;;
+ *) tmp_libs="$tmp_libs $deplib" ;;
+ esac
+ done
+ eval $var=\"$tmp_libs\"
+ done # for var
+ fi
+ # Last step: remove runtime libs from dependency_libs
+ # (they stay in deplibs)
+ tmp_libs=
+ for i in $dependency_libs ; do
+ case " $predeps $postdeps $compiler_lib_search_path " in
+ *" $i "*)
+ i=""
+ ;;
+ esac
+ if test -n "$i" ; then
+ tmp_libs="$tmp_libs $i"
+ fi
+ done
+ dependency_libs=$tmp_libs
+ done # for pass
+ if test "$linkmode" = prog; then
+ dlfiles="$newdlfiles"
+ fi
+ if test "$linkmode" = prog || test "$linkmode" = lib; then
+ dlprefiles="$newdlprefiles"
+ fi
+
+ case $linkmode in
+ oldlib)
+ if test -n "$dlfiles$dlprefiles" || test "$dlself" != no; then
+ func_warning "\`-dlopen' is ignored for archives"
+ fi
+
+ case " $deplibs" in
+ *\ -l* | *\ -L*)
+ func_warning "\`-l' and \`-L' are ignored for archives" ;;
+ esac
+
+ test -n "$rpath" && \
+ func_warning "\`-rpath' is ignored for archives"
+
+ test -n "$xrpath" && \
+ func_warning "\`-R' is ignored for archives"
+
+ test -n "$vinfo" && \
+ func_warning "\`-version-info/-version-number' is ignored for archives"
+
+ test -n "$release" && \
+ func_warning "\`-release' is ignored for archives"
+
+ test -n "$export_symbols$export_symbols_regex" && \
+ func_warning "\`-export-symbols' is ignored for archives"
+
+ # Now set the variables for building old libraries.
+ build_libtool_libs=no
+ oldlibs="$output"
+ objs="$objs$old_deplibs"
+ ;;
+
+ lib)
+ # Make sure we only generate libraries of the form `libNAME.la'.
+ case $outputname in
+ lib*)
+ func_stripname 'lib' '.la' "$outputname"
+ name=$func_stripname_result
+ eval shared_ext=\"$shrext_cmds\"
+ eval libname=\"$libname_spec\"
+ ;;
+ *)
+ test "$module" = no && \
+ func_fatal_help "libtool library \`$output' must begin with \`lib'"
+
+ if test "$need_lib_prefix" != no; then
+ # Add the "lib" prefix for modules if required
+ func_stripname '' '.la' "$outputname"
+ name=$func_stripname_result
+ eval shared_ext=\"$shrext_cmds\"
+ eval libname=\"$libname_spec\"
+ else
+ func_stripname '' '.la' "$outputname"
+ libname=$func_stripname_result
+ fi
+ ;;
+ esac
+
+ if test -n "$objs"; then
+ if test "$deplibs_check_method" != pass_all; then
+ func_fatal_error "cannot build libtool library \`$output' from non-libtool objects on this host:$objs"
+ else
+ $ECHO
+ $ECHO "*** Warning: Linking the shared library $output against the non-libtool"
+ $ECHO "*** objects $objs is not portable!"
+ libobjs="$libobjs $objs"
+ fi
+ fi
+
+ test "$dlself" != no && \
+ func_warning "\`-dlopen self' is ignored for libtool libraries"
+
+ set dummy $rpath
+ shift
+ test "$#" -gt 1 && \
+ func_warning "ignoring multiple \`-rpath's for a libtool library"
+
+ install_libdir="$1"
+
+ oldlibs=
+ if test -z "$rpath"; then
+ if test "$build_libtool_libs" = yes; then
+ # Building a libtool convenience library.
+ # Some compilers have problems with a `.al' extension so
+ # convenience libraries should have the same extension an
+ # archive normally would.
+ oldlibs="$output_objdir/$libname.$libext $oldlibs"
+ build_libtool_libs=convenience
+ build_old_libs=yes
+ fi
+
+ test -n "$vinfo" && \
+ func_warning "\`-version-info/-version-number' is ignored for convenience libraries"
+
+ test -n "$release" && \
+ func_warning "\`-release' is ignored for convenience libraries"
+ else
+
+ # Parse the version information argument.
+ save_ifs="$IFS"; IFS=':'
+ set dummy $vinfo 0 0 0
+ shift
+ IFS="$save_ifs"
+
+ test -n "$7" && \
+ func_fatal_help "too many parameters to \`-version-info'"
+
+ # convert absolute version numbers to libtool ages
+ # this retains compatibility with .la files and attempts
+ # to make the code below a bit more comprehensible
+
+ case $vinfo_number in
+ yes)
+ number_major="$1"
+ number_minor="$2"
+ number_revision="$3"
+ #
+ # There are really only two kinds -- those that
+ # use the current revision as the major version
+ # and those that subtract age and use age as
+ # a minor version. But, then there is irix
+ # which has an extra 1 added just for fun
+ #
+ case $version_type in
+ darwin|linux|osf|windows|none)
+ func_arith $number_major + $number_minor
+ current=$func_arith_result
+ age="$number_minor"
+ revision="$number_revision"
+ ;;
+ freebsd-aout|freebsd-elf|sunos)
+ current="$number_major"
+ revision="$number_minor"
+ age="0"
+ ;;
+ irix|nonstopux)
+ func_arith $number_major + $number_minor
+ current=$func_arith_result
+ age="$number_minor"
+ revision="$number_minor"
+ lt_irix_increment=no
+ ;;
+ esac
+ ;;
+ no)
+ current="$1"
+ revision="$2"
+ age="$3"
+ ;;
+ esac
+
+ # Check that each of the things are valid numbers.
+ case $current in
+ 0|[1-9]|[1-9][0-9]|[1-9][0-9][0-9]|[1-9][0-9][0-9][0-9]|[1-9][0-9][0-9][0-9][0-9]) ;;
+ *)
+ func_error "CURRENT \`$current' must be a nonnegative integer"
+ func_fatal_error "\`$vinfo' is not valid version information"
+ ;;
+ esac
+
+ case $revision in
+ 0|[1-9]|[1-9][0-9]|[1-9][0-9][0-9]|[1-9][0-9][0-9][0-9]|[1-9][0-9][0-9][0-9][0-9]) ;;
+ *)
+ func_error "REVISION \`$revision' must be a nonnegative integer"
+ func_fatal_error "\`$vinfo' is not valid version information"
+ ;;
+ esac
+
+ case $age in
+ 0|[1-9]|[1-9][0-9]|[1-9][0-9][0-9]|[1-9][0-9][0-9][0-9]|[1-9][0-9][0-9][0-9][0-9]) ;;
+ *)
+ func_error "AGE \`$age' must be a nonnegative integer"
+ func_fatal_error "\`$vinfo' is not valid version information"
+ ;;
+ esac
+
+ if test "$age" -gt "$current"; then
+ func_error "AGE \`$age' is greater than the current interface number \`$current'"
+ func_fatal_error "\`$vinfo' is not valid version information"
+ fi
+
+ # Calculate the version variables.
+ major=
+ versuffix=
+ verstring=
+ case $version_type in
+ none) ;;
+
+ darwin)
+ # Like Linux, but with the current version available in
+ # verstring for coding it into the library header
+ func_arith $current - $age
+ major=.$func_arith_result
+ versuffix="$major.$age.$revision"
+ # Darwin ld doesn't like 0 for these options...
+ func_arith $current + 1
+ minor_current=$func_arith_result
+ xlcverstring="${wl}-compatibility_version ${wl}$minor_current ${wl}-current_version ${wl}$minor_current.$revision"
+ verstring="-compatibility_version $minor_current -current_version $minor_current.$revision"
+ ;;
+
+ freebsd-aout)
+ major=".$current"
+ versuffix=".$current.$revision";
+ ;;
+
+ freebsd-elf)
+ major=".$current"
+ versuffix=".$current"
+ ;;
+
+ irix | nonstopux)
+ if test "X$lt_irix_increment" = "Xno"; then
+ func_arith $current - $age
+ else
+ func_arith $current - $age + 1
+ fi
+ major=$func_arith_result
+
+ case $version_type in
+ nonstopux) verstring_prefix=nonstopux ;;
+ *) verstring_prefix=sgi ;;
+ esac
+ verstring="$verstring_prefix$major.$revision"
+
+ # Add in all the interfaces that we are compatible with.
+ loop=$revision
+ while test "$loop" -ne 0; do
+ func_arith $revision - $loop
+ iface=$func_arith_result
+ func_arith $loop - 1
+ loop=$func_arith_result
+ verstring="$verstring_prefix$major.$iface:$verstring"
+ done
+
+ # Before this point, $major must not contain `.'.
+ major=.$major
+ versuffix="$major.$revision"
+ ;;
+
+ linux)
+ func_arith $current - $age
+ major=.$func_arith_result
+ versuffix="$major.$age.$revision"
+ ;;
+
+ osf)
+ func_arith $current - $age
+ major=.$func_arith_result
+ versuffix=".$current.$age.$revision"
+ verstring="$current.$age.$revision"
+
+ # Add in all the interfaces that we are compatible with.
+ loop=$age
+ while test "$loop" -ne 0; do
+ func_arith $current - $loop
+ iface=$func_arith_result
+ func_arith $loop - 1
+ loop=$func_arith_result
+ verstring="$verstring:${iface}.0"
+ done
+
+ # Make executables depend on our current version.
+ verstring="$verstring:${current}.0"
+ ;;
+
+ qnx)
+ major=".$current"
+ versuffix=".$current"
+ ;;
+
+ sunos)
+ major=".$current"
+ versuffix=".$current.$revision"
+ ;;
+
+ windows)
+ # Use '-' rather than '.', since we only want one
+ # extension on DOS 8.3 filesystems.
+ func_arith $current - $age
+ major=$func_arith_result
+ versuffix="-$major"
+ ;;
+
+ *)
+ func_fatal_configuration "unknown library version type \`$version_type'"
+ ;;
+ esac
+
+ # Clear the version info if we defaulted, and they specified a release.
+ if test -z "$vinfo" && test -n "$release"; then
+ major=
+ case $version_type in
+ darwin)
+ # we can't check for "0.0" in archive_cmds due to quoting
+ # problems, so we reset it completely
+ verstring=
+ ;;
+ *)
+ verstring="0.0"
+ ;;
+ esac
+ if test "$need_version" = no; then
+ versuffix=
+ else
+ versuffix=".0.0"
+ fi
+ fi
+
+ # Remove version info from name if versioning should be avoided
+ if test "$avoid_version" = yes && test "$need_version" = no; then
+ major=
+ versuffix=
+ verstring=""
+ fi
+
+ # Check to see if the archive will have undefined symbols.
+ if test "$allow_undefined" = yes; then
+ if test "$allow_undefined_flag" = unsupported; then
+ func_warning "undefined symbols not allowed in $host shared libraries"
+ build_libtool_libs=no
+ build_old_libs=yes
+ fi
+ else
+ # Don't allow undefined symbols.
+ allow_undefined_flag="$no_undefined_flag"
+ fi
+
+ fi
+
+ func_generate_dlsyms "$libname" "$libname" "yes"
+ libobjs="$libobjs $symfileobj"
+ test "X$libobjs" = "X " && libobjs=
+
+ if test "$mode" != relink; then
+ # Remove our outputs, but don't remove object files since they
+ # may have been created when compiling PIC objects.
+ removelist=
+ tempremovelist=`$ECHO "$output_objdir/*"`
+ for p in $tempremovelist; do
+ case $p in
+ *.$objext | *.gcno)
+ ;;
+ $output_objdir/$outputname | $output_objdir/$libname.* | $output_objdir/${libname}${release}.*)
+ if test "X$precious_files_regex" != "X"; then
+ if $ECHO "$p" | $EGREP -e "$precious_files_regex" >/dev/null 2>&1
+ then
+ continue
+ fi
+ fi
+ removelist="$removelist $p"
+ ;;
+ *) ;;
+ esac
+ done
+ test -n "$removelist" && \
+ func_show_eval "${RM}r \$removelist"
+ fi
+
+ # Now set the variables for building old libraries.
+ if test "$build_old_libs" = yes && test "$build_libtool_libs" != convenience ; then
+ oldlibs="$oldlibs $output_objdir/$libname.$libext"
+
+ # Transform .lo files to .o files.
+ oldobjs="$objs "`$ECHO "X$libobjs" | $SP2NL | $Xsed -e '/\.'${libext}'$/d' -e "$lo2o" | $NL2SP`
+ fi
+
+ # Eliminate all temporary directories.
+ #for path in $notinst_path; do
+ # lib_search_path=`$ECHO "X$lib_search_path " | $Xsed -e "s% $path % %g"`
+ # deplibs=`$ECHO "X$deplibs " | $Xsed -e "s% -L$path % %g"`
+ # dependency_libs=`$ECHO "X$dependency_libs " | $Xsed -e "s% -L$path % %g"`
+ #done
+
+ if test -n "$xrpath"; then
+ # If the user specified any rpath flags, then add them.
+ temp_xrpath=
+ for libdir in $xrpath; do
+ temp_xrpath="$temp_xrpath -R$libdir"
+ case "$finalize_rpath " in
+ *" $libdir "*) ;;
+ *) finalize_rpath="$finalize_rpath $libdir" ;;
+ esac
+ done
+ if test "$hardcode_into_libs" != yes || test "$build_old_libs" = yes; then
+ dependency_libs="$temp_xrpath $dependency_libs"
+ fi
+ fi
+
+ # Make sure dlfiles contains only unique files that won't be dlpreopened
+ old_dlfiles="$dlfiles"
+ dlfiles=
+ for lib in $old_dlfiles; do
+ case " $dlprefiles $dlfiles " in
+ *" $lib "*) ;;
+ *) dlfiles="$dlfiles $lib" ;;
+ esac
+ done
+
+ # Make sure dlprefiles contains only unique files
+ old_dlprefiles="$dlprefiles"
+ dlprefiles=
+ for lib in $old_dlprefiles; do
+ case "$dlprefiles " in
+ *" $lib "*) ;;
+ *) dlprefiles="$dlprefiles $lib" ;;
+ esac
+ done
+
+ if test "$build_libtool_libs" = yes; then
+ if test -n "$rpath"; then
+ case $host in
+ *-*-cygwin* | *-*-mingw* | *-*-pw32* | *-*-os2* | *-*-beos* | *-cegcc*)
+ # these systems don't actually have a c library (as such)!
+ ;;
+ *-*-rhapsody* | *-*-darwin1.[012])
+ # Rhapsody C library is in the System framework
+ deplibs="$deplibs System.ltframework"
+ ;;
+ *-*-netbsd*)
+ # Don't link with libc until the a.out ld.so is fixed.
+ ;;
+ *-*-openbsd* | *-*-freebsd* | *-*-dragonfly*)
+ # Do not include libc due to us having libc/libc_r.
+ ;;
+ *-*-sco3.2v5* | *-*-sco5v6*)
+ # Causes problems with __ctype
+ ;;
+ *-*-sysv4.2uw2* | *-*-sysv5* | *-*-unixware* | *-*-OpenUNIX*)
+ # Compiler inserts libc in the correct place for threads to work
+ ;;
+ *)
+ # Add libc to deplibs on all other systems if necessary.
+ if test "$build_libtool_need_lc" = "yes"; then
+ deplibs="$deplibs -lc"
+ fi
+ ;;
+ esac
+ fi
+
+ # Transform deplibs into only deplibs that can be linked in shared.
+ name_save=$name
+ libname_save=$libname
+ release_save=$release
+ versuffix_save=$versuffix
+ major_save=$major
+ # I'm not sure if I'm treating the release correctly. I think
+ # release should show up in the -l (ie -lgmp5) so we don't want to
+ # add it in twice. Is that correct?
+ release=""
+ versuffix=""
+ major=""
+ newdeplibs=
+ droppeddeps=no
+ case $deplibs_check_method in
+ pass_all)
+ # Don't check for shared/static. Everything works.
+ # This might be a little naive. We might want to check
+ # whether the library exists or not. But this is on
+ # osf3 & osf4 and I'm not really sure... Just
+ # implementing what was already the behavior.
+ newdeplibs=$deplibs
+ ;;
+ test_compile)
+ # This code stresses the "libraries are programs" paradigm to its
+ # limits. Maybe even breaks it. We compile a program, linking it
+ # against the deplibs as a proxy for the library. Then we can check
+ # whether they linked in statically or dynamically with ldd.
+ $opt_dry_run || $RM conftest.c
+ cat > conftest.c <<EOF
+ int main() { return 0; }
+EOF
+ $opt_dry_run || $RM conftest
+ if $LTCC $LTCFLAGS -o conftest conftest.c $deplibs; then
+ ldd_output=`ldd conftest`
+ for i in $deplibs; do
+ case $i in
+ -l*)
+ func_stripname -l '' "$i"
+ name=$func_stripname_result
+ if test "X$allow_libtool_libs_with_static_runtimes" = "Xyes" ; then
+ case " $predeps $postdeps " in
+ *" $i "*)
+ newdeplibs="$newdeplibs $i"
+ i=""
+ ;;
+ esac
+ fi
+ if test -n "$i" ; then
+ libname=`eval "\\$ECHO \"$libname_spec\""`
+ deplib_matches=`eval "\\$ECHO \"$library_names_spec\""`
+ set dummy $deplib_matches; shift
+ deplib_match=$1
+ if test `expr "$ldd_output" : ".*$deplib_match"` -ne 0 ; then
+ newdeplibs="$newdeplibs $i"
+ else
+ droppeddeps=yes
+ $ECHO
+ $ECHO "*** Warning: dynamic linker does not accept needed library $i."
+ $ECHO "*** I have the capability to make that library automatically link in when"
+ $ECHO "*** you link to this library. But I can only do this if you have a"
+ $ECHO "*** shared version of the library, which I believe you do not have"
+ $ECHO "*** because a test_compile did reveal that the linker did not use it for"
+ $ECHO "*** its dynamic dependency list that programs get resolved with at runtime."
+ fi
+ fi
+ ;;
+ *)
+ newdeplibs="$newdeplibs $i"
+ ;;
+ esac
+ done
+ else
+ # Error occurred in the first compile. Let's try to salvage
+ # the situation: Compile a separate program for each library.
+ for i in $deplibs; do
+ case $i in
+ -l*)
+ func_stripname -l '' "$i"
+ name=$func_stripname_result
+ $opt_dry_run || $RM conftest
+ if $LTCC $LTCFLAGS -o conftest conftest.c $i; then
+ ldd_output=`ldd conftest`
+ if test "X$allow_libtool_libs_with_static_runtimes" = "Xyes" ; then
+ case " $predeps $postdeps " in
+ *" $i "*)
+ newdeplibs="$newdeplibs $i"
+ i=""
+ ;;
+ esac
+ fi
+ if test -n "$i" ; then
+ libname=`eval "\\$ECHO \"$libname_spec\""`
+ deplib_matches=`eval "\\$ECHO \"$library_names_spec\""`
+ set dummy $deplib_matches; shift
+ deplib_match=$1
+ if test `expr "$ldd_output" : ".*$deplib_match"` -ne 0 ; then
+ newdeplibs="$newdeplibs $i"
+ else
+ droppeddeps=yes
+ $ECHO
+ $ECHO "*** Warning: dynamic linker does not accept needed library $i."
+ $ECHO "*** I have the capability to make that library automatically link in when"
+ $ECHO "*** you link to this library. But I can only do this if you have a"
+ $ECHO "*** shared version of the library, which you do not appear to have"
+ $ECHO "*** because a test_compile did reveal that the linker did not use this one"
+ $ECHO "*** as a dynamic dependency that programs can get resolved with at runtime."
+ fi
+ fi
+ else
+ droppeddeps=yes
+ $ECHO
+ $ECHO "*** Warning! Library $i is needed by this library but I was not able to"
+ $ECHO "*** make it link in! You will probably need to install it or some"
+ $ECHO "*** library that it depends on before this library will be fully"
+ $ECHO "*** functional. Installing it before continuing would be even better."
+ fi
+ ;;
+ *)
+ newdeplibs="$newdeplibs $i"
+ ;;
+ esac
+ done
+ fi
+ ;;
+ file_magic*)
+ set dummy $deplibs_check_method; shift
+ file_magic_regex=`expr "$deplibs_check_method" : "$1 \(.*\)"`
+ for a_deplib in $deplibs; do
+ case $a_deplib in
+ -l*)
+ func_stripname -l '' "$a_deplib"
+ name=$func_stripname_result
+ if test "X$allow_libtool_libs_with_static_runtimes" = "Xyes" ; then
+ case " $predeps $postdeps " in
+ *" $a_deplib "*)
+ newdeplibs="$newdeplibs $a_deplib"
+ a_deplib=""
+ ;;
+ esac
+ fi
+ if test -n "$a_deplib" ; then
+ libname=`eval "\\$ECHO \"$libname_spec\""`
+ for i in $lib_search_path $sys_lib_search_path $shlib_search_path; do
+ potential_libs=`ls $i/$libname[.-]* 2>/dev/null`
+ for potent_lib in $potential_libs; do
+ # Follow soft links.
+ if ls -lLd "$potent_lib" 2>/dev/null |
+ $GREP " -> " >/dev/null; then
+ continue
+ fi
+ # The statement above tries to avoid entering an
+ # endless loop below, in case of cyclic links.
+ # We might still enter an endless loop, since a link
+ # loop can be closed while we follow links,
+ # but so what?
+ potlib="$potent_lib"
+ while test -h "$potlib" 2>/dev/null; do
+ potliblink=`ls -ld $potlib | ${SED} 's/.* -> //'`
+ case $potliblink in
+ [\\/]* | [A-Za-z]:[\\/]*) potlib="$potliblink";;
+ *) potlib=`$ECHO "X$potlib" | $Xsed -e 's,[^/]*$,,'`"$potliblink";;
+ esac
+ done
+ if eval $file_magic_cmd \"\$potlib\" 2>/dev/null |
+ $SED -e 10q |
+ $EGREP "$file_magic_regex" > /dev/null; then
+ newdeplibs="$newdeplibs $a_deplib"
+ a_deplib=""
+ break 2
+ fi
+ done
+ done
+ fi
+ if test -n "$a_deplib" ; then
+ droppeddeps=yes
+ $ECHO
+ $ECHO "*** Warning: linker path does not have real file for library $a_deplib."
+ $ECHO "*** I have the capability to make that library automatically link in when"
+ $ECHO "*** you link to this library. But I can only do this if you have a"
+ $ECHO "*** shared version of the library, which you do not appear to have"
+ $ECHO "*** because I did check the linker path looking for a file starting"
+ if test -z "$potlib" ; then
+ $ECHO "*** with $libname but no candidates were found. (...for file magic test)"
+ else
+ $ECHO "*** with $libname and none of the candidates passed a file format test"
+ $ECHO "*** using a file magic. Last file checked: $potlib"
+ fi
+ fi
+ ;;
+ *)
+ # Add a -L argument.
+ newdeplibs="$newdeplibs $a_deplib"
+ ;;
+ esac
+ done # Gone through all deplibs.
+ ;;
+ match_pattern*)
+ set dummy $deplibs_check_method; shift
+ match_pattern_regex=`expr "$deplibs_check_method" : "$1 \(.*\)"`
+ for a_deplib in $deplibs; do
+ case $a_deplib in
+ -l*)
+ func_stripname -l '' "$a_deplib"
+ name=$func_stripname_result
+ if test "X$allow_libtool_libs_with_static_runtimes" = "Xyes" ; then
+ case " $predeps $postdeps " in
+ *" $a_deplib "*)
+ newdeplibs="$newdeplibs $a_deplib"
+ a_deplib=""
+ ;;
+ esac
+ fi
+ if test -n "$a_deplib" ; then
+ libname=`eval "\\$ECHO \"$libname_spec\""`
+ for i in $lib_search_path $sys_lib_search_path $shlib_search_path; do
+ potential_libs=`ls $i/$libname[.-]* 2>/dev/null`
+ for potent_lib in $potential_libs; do
+ potlib="$potent_lib" # see symlink-check above in file_magic test
+ if eval "\$ECHO \"X$potent_lib\"" 2>/dev/null | $Xsed -e 10q | \
+ $EGREP "$match_pattern_regex" > /dev/null; then
+ newdeplibs="$newdeplibs $a_deplib"
+ a_deplib=""
+ break 2
+ fi
+ done
+ done
+ fi
+ if test -n "$a_deplib" ; then
+ droppeddeps=yes
+ $ECHO
+ $ECHO "*** Warning: linker path does not have real file for library $a_deplib."
+ $ECHO "*** I have the capability to make that library automatically link in when"
+ $ECHO "*** you link to this library. But I can only do this if you have a"
+ $ECHO "*** shared version of the library, which you do not appear to have"
+ $ECHO "*** because I did check the linker path looking for a file starting"
+ if test -z "$potlib" ; then
+ $ECHO "*** with $libname but no candidates were found. (...for regex pattern test)"
+ else
+ $ECHO "*** with $libname and none of the candidates passed a file format test"
+ $ECHO "*** using a regex pattern. Last file checked: $potlib"
+ fi
+ fi
+ ;;
+ *)
+ # Add a -L argument.
+ newdeplibs="$newdeplibs $a_deplib"
+ ;;
+ esac
+ done # Gone through all deplibs.
+ ;;
+ none | unknown | *)
+ newdeplibs=""
+ tmp_deplibs=`$ECHO "X $deplibs" | $Xsed \
+ -e 's/ -lc$//' -e 's/ -[LR][^ ]*//g'`
+ if test "X$allow_libtool_libs_with_static_runtimes" = "Xyes" ; then
+ for i in $predeps $postdeps ; do
+ # can't use Xsed below, because $i might contain '/'
+ tmp_deplibs=`$ECHO "X $tmp_deplibs" | $Xsed -e "s,$i,,"`
+ done
+ fi
+ if $ECHO "X $tmp_deplibs" | $Xsed -e 's/[ ]//g' |
+ $GREP . >/dev/null; then
+ $ECHO
+ if test "X$deplibs_check_method" = "Xnone"; then
+ $ECHO "*** Warning: inter-library dependencies are not supported in this platform."
+ else
+ $ECHO "*** Warning: inter-library dependencies are not known to be supported."
+ fi
+ $ECHO "*** All declared inter-library dependencies are being dropped."
+ droppeddeps=yes
+ fi
+ ;;
+ esac
+ versuffix=$versuffix_save
+ major=$major_save
+ release=$release_save
+ libname=$libname_save
+ name=$name_save
+
+ case $host in
+ *-*-rhapsody* | *-*-darwin1.[012])
+ # On Rhapsody replace the C library with the System framework
+ newdeplibs=`$ECHO "X $newdeplibs" | $Xsed -e 's/ -lc / System.ltframework /'`
+ ;;
+ esac
+
+ if test "$droppeddeps" = yes; then
+ if test "$module" = yes; then
+ $ECHO
+ $ECHO "*** Warning: libtool could not satisfy all declared inter-library"
+ $ECHO "*** dependencies of module $libname. Therefore, libtool will create"
+ $ECHO "*** a static module, that should work as long as the dlopening"
+ $ECHO "*** application is linked with the -dlopen flag."
+ if test -z "$global_symbol_pipe"; then
+ $ECHO
+ $ECHO "*** However, this would only work if libtool was able to extract symbol"
+ $ECHO "*** lists from a program, using \`nm' or equivalent, but libtool could"
+ $ECHO "*** not find such a program. So, this module is probably useless."
+ $ECHO "*** \`nm' from GNU binutils and a full rebuild may help."
+ fi
+ if test "$build_old_libs" = no; then
+ oldlibs="$output_objdir/$libname.$libext"
+ build_libtool_libs=module
+ build_old_libs=yes
+ else
+ build_libtool_libs=no
+ fi
+ else
+ $ECHO "*** The inter-library dependencies that have been dropped here will be"
+ $ECHO "*** automatically added whenever a program is linked with this library"
+ $ECHO "*** or is declared to -dlopen it."
+
+ if test "$allow_undefined" = no; then
+ $ECHO
+ $ECHO "*** Since this library must not contain undefined symbols,"
+ $ECHO "*** because either the platform does not support them or"
+ $ECHO "*** it was explicitly requested with -no-undefined,"
+ $ECHO "*** libtool will only create a static version of it."
+ if test "$build_old_libs" = no; then
+ oldlibs="$output_objdir/$libname.$libext"
+ build_libtool_libs=module
+ build_old_libs=yes
+ else
+ build_libtool_libs=no
+ fi
+ fi
+ fi
+ fi
+ # Done checking deplibs!
+ deplibs=$newdeplibs
+ fi
+ # Time to change all our "foo.ltframework" stuff back to "-framework foo"
+ case $host in
+ *-*-darwin*)
+ newdeplibs=`$ECHO "X $newdeplibs" | $Xsed -e 's% \([^ $]*\).ltframework% -framework \1%g'`
+ new_inherited_linker_flags=`$ECHO "X $new_inherited_linker_flags" | $Xsed -e 's% \([^ $]*\).ltframework% -framework \1%g'`
+ deplibs=`$ECHO "X $deplibs" | $Xsed -e 's% \([^ $]*\).ltframework% -framework \1%g'`
+ ;;
+ esac
+
+ # move library search paths that coincide with paths to not yet
+ # installed libraries to the beginning of the library search list
+ new_libs=
+ for path in $notinst_path; do
+ case " $new_libs " in
+ *" -L$path/$objdir "*) ;;
+ *)
+ case " $deplibs " in
+ *" -L$path/$objdir "*)
+ new_libs="$new_libs -L$path/$objdir" ;;
+ esac
+ ;;
+ esac
+ done
+ for deplib in $deplibs; do
+ case $deplib in
+ -L*)
+ case " $new_libs " in
+ *" $deplib "*) ;;
+ *) new_libs="$new_libs $deplib" ;;
+ esac
+ ;;
+ *) new_libs="$new_libs $deplib" ;;
+ esac
+ done
+ deplibs="$new_libs"
+
+ # All the library-specific variables (install_libdir is set above).
+ library_names=
+ old_library=
+ dlname=
+
+ # Test again, we may have decided not to build it any more
+ if test "$build_libtool_libs" = yes; then
+ if test "$hardcode_into_libs" = yes; then
+ # Hardcode the library paths
+ hardcode_libdirs=
+ dep_rpath=
+ rpath="$finalize_rpath"
+ test "$mode" != relink && rpath="$compile_rpath$rpath"
+ for libdir in $rpath; do
+ if test -n "$hardcode_libdir_flag_spec"; then
+ if test -n "$hardcode_libdir_separator"; then
+ if test -z "$hardcode_libdirs"; then
+ hardcode_libdirs="$libdir"
+ else
+ # Just accumulate the unique libdirs.
+ case $hardcode_libdir_separator$hardcode_libdirs$hardcode_libdir_separator in
+ *"$hardcode_libdir_separator$libdir$hardcode_libdir_separator"*)
+ ;;
+ *)
+ hardcode_libdirs="$hardcode_libdirs$hardcode_libdir_separator$libdir"
+ ;;
+ esac
+ fi
+ else
+ eval flag=\"$hardcode_libdir_flag_spec\"
+ dep_rpath="$dep_rpath $flag"
+ fi
+ elif test -n "$runpath_var"; then
+ case "$perm_rpath " in
+ *" $libdir "*) ;;
+ *) perm_rpath="$perm_rpath $libdir" ;;
+ esac
+ fi
+ done
+ # Substitute the hardcoded libdirs into the rpath.
+ if test -n "$hardcode_libdir_separator" &&
+ test -n "$hardcode_libdirs"; then
+ libdir="$hardcode_libdirs"
+ if test -n "$hardcode_libdir_flag_spec_ld"; then
+ eval dep_rpath=\"$hardcode_libdir_flag_spec_ld\"
+ else
+ eval dep_rpath=\"$hardcode_libdir_flag_spec\"
+ fi
+ fi
+ if test -n "$runpath_var" && test -n "$perm_rpath"; then
+ # We should set the runpath_var.
+ rpath=
+ for dir in $perm_rpath; do
+ rpath="$rpath$dir:"
+ done
+ eval "$runpath_var='$rpath\$$runpath_var'; export $runpath_var"
+ fi
+ test -n "$dep_rpath" && deplibs="$dep_rpath $deplibs"
+ fi
+
+ shlibpath="$finalize_shlibpath"
+ test "$mode" != relink && shlibpath="$compile_shlibpath$shlibpath"
+ if test -n "$shlibpath"; then
+ eval "$shlibpath_var='$shlibpath\$$shlibpath_var'; export $shlibpath_var"
+ fi
+
+ # Get the real and link names of the library.
+ eval shared_ext=\"$shrext_cmds\"
+ eval library_names=\"$library_names_spec\"
+ set dummy $library_names
+ shift
+ realname="$1"
+ shift
+
+ if test -n "$soname_spec"; then
+ eval soname=\"$soname_spec\"
+ else
+ soname="$realname"
+ fi
+ if test -z "$dlname"; then
+ dlname=$soname
+ fi
+
+ lib="$output_objdir/$realname"
+ linknames=
+ for link
+ do
+ linknames="$linknames $link"
+ done
+
+ # Use standard objects if they are pic
+ test -z "$pic_flag" && libobjs=`$ECHO "X$libobjs" | $SP2NL | $Xsed -e "$lo2o" | $NL2SP`
+ test "X$libobjs" = "X " && libobjs=
+
+ delfiles=
+ if test -n "$export_symbols" && test -n "$include_expsyms"; then
+ $opt_dry_run || cp "$export_symbols" "$output_objdir/$libname.uexp"
+ export_symbols="$output_objdir/$libname.uexp"
+ delfiles="$delfiles $export_symbols"
+ fi
+
+ orig_export_symbols=
+ case $host_os in
+ cygwin* | mingw* | cegcc*)
+ if test -n "$export_symbols" && test -z "$export_symbols_regex"; then
+ # exporting using user supplied symfile
+ if test "x`$SED 1q $export_symbols`" != xEXPORTS; then
+ # and it's NOT already a .def file. Must figure out
+ # which of the given symbols are data symbols and tag
+ # them as such. So, trigger use of export_symbols_cmds.
+ # export_symbols gets reassigned inside the "prepare
+ # the list of exported symbols" if statement, so the
+ # include_expsyms logic still works.
+ orig_export_symbols="$export_symbols"
+ export_symbols=
+ always_export_symbols=yes
+ fi
+ fi
+ ;;
+ esac
+
+ # Prepare the list of exported symbols
+ if test -z "$export_symbols"; then
+ if test "$always_export_symbols" = yes || test -n "$export_symbols_regex"; then
+ func_verbose "generating symbol list for \`$libname.la'"
+ export_symbols="$output_objdir/$libname.exp"
+ $opt_dry_run || $RM $export_symbols
+ cmds=$export_symbols_cmds
+ save_ifs="$IFS"; IFS='~'
+ for cmd in $cmds; do
+ IFS="$save_ifs"
+ eval cmd=\"$cmd\"
+ func_len " $cmd"
+ len=$func_len_result
+ if test "$len" -lt "$max_cmd_len" || test "$max_cmd_len" -le -1; then
+ func_show_eval "$cmd" 'exit $?'
+ skipped_export=false
+ else
+ # The command line is too long to execute in one step.
+ func_verbose "using reloadable object file for export list..."
+ skipped_export=:
+ # Break out early, otherwise skipped_export may be
+ # set to false by a later but shorter cmd.
+ break
+ fi
+ done
+ IFS="$save_ifs"
+ if test -n "$export_symbols_regex" && test "X$skipped_export" != "X:"; then
+ func_show_eval '$EGREP -e "$export_symbols_regex" "$export_symbols" > "${export_symbols}T"'
+ func_show_eval '$MV "${export_symbols}T" "$export_symbols"'
+ fi
+ fi
+ fi
+
+ if test -n "$export_symbols" && test -n "$include_expsyms"; then
+ tmp_export_symbols="$export_symbols"
+ test -n "$orig_export_symbols" && tmp_export_symbols="$orig_export_symbols"
+ $opt_dry_run || eval '$ECHO "X$include_expsyms" | $Xsed | $SP2NL >> "$tmp_export_symbols"'
+ fi
+
+ if test "X$skipped_export" != "X:" && test -n "$orig_export_symbols"; then
+ # The given exports_symbols file has to be filtered, so filter it.
+ func_verbose "filter symbol list for \`$libname.la' to tag DATA exports"
+ # FIXME: $output_objdir/$libname.filter potentially contains lots of
+ # 's' commands which not all seds can handle. GNU sed should be fine
+ # though. Also, the filter scales superlinearly with the number of
+ # global variables. join(1) would be nice here, but unfortunately
+ # isn't a blessed tool.
+ $opt_dry_run || $SED -e '/[ ,]DATA/!d;s,\(.*\)\([ \,].*\),s|^\1$|\1\2|,' < $export_symbols > $output_objdir/$libname.filter
+ delfiles="$delfiles $export_symbols $output_objdir/$libname.filter"
+ export_symbols=$output_objdir/$libname.def
+ $opt_dry_run || $SED -f $output_objdir/$libname.filter < $orig_export_symbols > $export_symbols
+ fi
+
+ tmp_deplibs=
+ for test_deplib in $deplibs; do
+ case " $convenience " in
+ *" $test_deplib "*) ;;
+ *)
+ tmp_deplibs="$tmp_deplibs $test_deplib"
+ ;;
+ esac
+ done
+ deplibs="$tmp_deplibs"
+
+ if test -n "$convenience"; then
+ if test -n "$whole_archive_flag_spec" &&
+ test "$compiler_needs_object" = yes &&
+ test -z "$libobjs"; then
+ # extract the archives, so we have objects to list.
+ # TODO: could optimize this to just extract one archive.
+ whole_archive_flag_spec=
+ fi
+ if test -n "$whole_archive_flag_spec"; then
+ save_libobjs=$libobjs
+ eval libobjs=\"\$libobjs $whole_archive_flag_spec\"
+ test "X$libobjs" = "X " && libobjs=
+ else
+ gentop="$output_objdir/${outputname}x"
+ generated="$generated $gentop"
+
+ func_extract_archives $gentop $convenience
+ libobjs="$libobjs $func_extract_archives_result"
+ test "X$libobjs" = "X " && libobjs=
+ fi
+ fi
+
+ if test "$thread_safe" = yes && test -n "$thread_safe_flag_spec"; then
+ eval flag=\"$thread_safe_flag_spec\"
+ linker_flags="$linker_flags $flag"
+ fi
+
+ # Make a backup of the uninstalled library when relinking
+ if test "$mode" = relink; then
+ $opt_dry_run || eval '(cd $output_objdir && $RM ${realname}U && $MV $realname ${realname}U)' || exit $?
+ fi
+
+ # Do each of the archive commands.
+ if test "$module" = yes && test -n "$module_cmds" ; then
+ if test -n "$export_symbols" && test -n "$module_expsym_cmds"; then
+ eval test_cmds=\"$module_expsym_cmds\"
+ cmds=$module_expsym_cmds
+ else
+ eval test_cmds=\"$module_cmds\"
+ cmds=$module_cmds
+ fi
+ else
+ if test -n "$export_symbols" && test -n "$archive_expsym_cmds"; then
+ eval test_cmds=\"$archive_expsym_cmds\"
+ cmds=$archive_expsym_cmds
+ else
+ eval test_cmds=\"$archive_cmds\"
+ cmds=$archive_cmds
+ fi
+ fi
+
+ if test "X$skipped_export" != "X:" &&
+ func_len " $test_cmds" &&
+ len=$func_len_result &&
+ test "$len" -lt "$max_cmd_len" || test "$max_cmd_len" -le -1; then
+ :
+ else
+ # The command line is too long to link in one step, link piecewise
+ # or, if using GNU ld and skipped_export is not :, use a linker
+ # script.
+
+ # Save the value of $output and $libobjs because we want to
+ # use them later. If we have whole_archive_flag_spec, we
+ # want to use save_libobjs as it was before
+ # whole_archive_flag_spec was expanded, because we can't
+ # assume the linker understands whole_archive_flag_spec.
+ # This may have to be revisited, in case too many
+ # convenience libraries get linked in and end up exceeding
+ # the spec.
+ if test -z "$convenience" || test -z "$whole_archive_flag_spec"; then
+ save_libobjs=$libobjs
+ fi
+ save_output=$output
+ output_la=`$ECHO "X$output" | $Xsed -e "$basename"`
+
+ # Clear the reloadable object creation command queue and
+ # initialize k to one.
+ test_cmds=
+ concat_cmds=
+ objlist=
+ last_robj=
+ k=1
+
+ if test -n "$save_libobjs" && test "X$skipped_export" != "X:" && test "$with_gnu_ld" = yes; then
+ output=${output_objdir}/${output_la}.lnkscript
+ func_verbose "creating GNU ld script: $output"
+ $ECHO 'INPUT (' > $output
+ for obj in $save_libobjs
+ do
+ $ECHO "$obj" >> $output
+ done
+ $ECHO ')' >> $output
+ delfiles="$delfiles $output"
+ elif test -n "$save_libobjs" && test "X$skipped_export" != "X:" && test "X$file_list_spec" != X; then
+ output=${output_objdir}/${output_la}.lnk
+ func_verbose "creating linker input file list: $output"
+ : > $output
+ set x $save_libobjs
+ shift
+ firstobj=
+ if test "$compiler_needs_object" = yes; then
+ firstobj="$1 "
+ shift
+ fi
+ for obj
+ do
+ $ECHO "$obj" >> $output
+ done
+ delfiles="$delfiles $output"
+ output=$firstobj\"$file_list_spec$output\"
+ else
+ if test -n "$save_libobjs"; then
+ func_verbose "creating reloadable object files..."
+ output=$output_objdir/$output_la-${k}.$objext
+ eval test_cmds=\"$reload_cmds\"
+ func_len " $test_cmds"
+ len0=$func_len_result
+ len=$len0
+
+ # Loop over the list of objects to be linked.
+ for obj in $save_libobjs
+ do
+ func_len " $obj"
+ func_arith $len + $func_len_result
+ len=$func_arith_result
+ if test "X$objlist" = X ||
+ test "$len" -lt "$max_cmd_len"; then
+ func_append objlist " $obj"
+ else
+ # The command $test_cmds is almost too long, add a
+ # command to the queue.
+ if test "$k" -eq 1 ; then
+ # The first file doesn't have a previous command to add.
+ eval concat_cmds=\"$reload_cmds $objlist $last_robj\"
+ else
+ # All subsequent reloadable object files will link in
+ # the last one created.
+ eval concat_cmds=\"\$concat_cmds~$reload_cmds $objlist $last_robj~\$RM $last_robj\"
+ fi
+ last_robj=$output_objdir/$output_la-${k}.$objext
+ func_arith $k + 1
+ k=$func_arith_result
+ output=$output_objdir/$output_la-${k}.$objext
+ objlist=$obj
+ func_len " $last_robj"
+ func_arith $len0 + $func_len_result
+ len=$func_arith_result
+ fi
+ done
+ # Handle the remaining objects by creating one last
+ # reloadable object file. All subsequent reloadable object
+ # files will link in the last one created.
+ test -z "$concat_cmds" || concat_cmds=$concat_cmds~
+ eval concat_cmds=\"\${concat_cmds}$reload_cmds $objlist $last_robj\"
+ if test -n "$last_robj"; then
+ eval concat_cmds=\"\${concat_cmds}~\$RM $last_robj\"
+ fi
+ delfiles="$delfiles $output"
+
+ else
+ output=
+ fi
+
+ if ${skipped_export-false}; then
+ func_verbose "generating symbol list for \`$libname.la'"
+ export_symbols="$output_objdir/$libname.exp"
+ $opt_dry_run || $RM $export_symbols
+ libobjs=$output
+ # Append the command to create the export file.
+ test -z "$concat_cmds" || concat_cmds=$concat_cmds~
+ eval concat_cmds=\"\$concat_cmds$export_symbols_cmds\"
+ if test -n "$last_robj"; then
+ eval concat_cmds=\"\$concat_cmds~\$RM $last_robj\"
+ fi
+ fi
+
+ test -n "$save_libobjs" &&
+ func_verbose "creating a temporary reloadable object file: $output"
+
+ # Loop through the commands generated above and execute them.
+ save_ifs="$IFS"; IFS='~'
+ for cmd in $concat_cmds; do
+ IFS="$save_ifs"
+ $opt_silent || {
+ func_quote_for_expand "$cmd"
+ eval "func_echo $func_quote_for_expand_result"
+ }
+ $opt_dry_run || eval "$cmd" || {
+ lt_exit=$?
+
+ # Restore the uninstalled library and exit
+ if test "$mode" = relink; then
+ ( cd "$output_objdir" && \
+ $RM "${realname}T" && \
+ $MV "${realname}U" "$realname" )
+ fi
+
+ exit $lt_exit
+ }
+ done
+ IFS="$save_ifs"
+
+ if test -n "$export_symbols_regex" && ${skipped_export-false}; then
+ func_show_eval '$EGREP -e "$export_symbols_regex" "$export_symbols" > "${export_symbols}T"'
+ func_show_eval '$MV "${export_symbols}T" "$export_symbols"'
+ fi
+ fi
+
+ if ${skipped_export-false}; then
+ if test -n "$export_symbols" && test -n "$include_expsyms"; then
+ tmp_export_symbols="$export_symbols"
+ test -n "$orig_export_symbols" && tmp_export_symbols="$orig_export_symbols"
+ $opt_dry_run || eval '$ECHO "X$include_expsyms" | $Xsed | $SP2NL >> "$tmp_export_symbols"'
+ fi
+
+ if test -n "$orig_export_symbols"; then
+ # The given exports_symbols file has to be filtered, so filter it.
+ func_verbose "filter symbol list for \`$libname.la' to tag DATA exports"
+ # FIXME: $output_objdir/$libname.filter potentially contains lots of
+ # 's' commands which not all seds can handle. GNU sed should be fine
+ # though. Also, the filter scales superlinearly with the number of
+ # global variables. join(1) would be nice here, but unfortunately
+ # isn't a blessed tool.
+ $opt_dry_run || $SED -e '/[ ,]DATA/!d;s,\(.*\)\([ \,].*\),s|^\1$|\1\2|,' < $export_symbols > $output_objdir/$libname.filter
+ delfiles="$delfiles $export_symbols $output_objdir/$libname.filter"
+ export_symbols=$output_objdir/$libname.def
+ $opt_dry_run || $SED -f $output_objdir/$libname.filter < $orig_export_symbols > $export_symbols
+ fi
+ fi
+
+ libobjs=$output
+ # Restore the value of output.
+ output=$save_output
+
+ if test -n "$convenience" && test -n "$whole_archive_flag_spec"; then
+ eval libobjs=\"\$libobjs $whole_archive_flag_spec\"
+ test "X$libobjs" = "X " && libobjs=
+ fi
+ # Expand the library linking commands again to reset the
+ # value of $libobjs for piecewise linking.
+
+ # Do each of the archive commands.
+ if test "$module" = yes && test -n "$module_cmds" ; then
+ if test -n "$export_symbols" && test -n "$module_expsym_cmds"; then
+ cmds=$module_expsym_cmds
+ else
+ cmds=$module_cmds
+ fi
+ else
+ if test -n "$export_symbols" && test -n "$archive_expsym_cmds"; then
+ cmds=$archive_expsym_cmds
+ else
+ cmds=$archive_cmds
+ fi
+ fi
+ fi
+
+ if test -n "$delfiles"; then
+ # Append the command to remove temporary files to $cmds.
+ eval cmds=\"\$cmds~\$RM $delfiles\"
+ fi
+
+ # Add any objects from preloaded convenience libraries
+ if test -n "$dlprefiles"; then
+ gentop="$output_objdir/${outputname}x"
+ generated="$generated $gentop"
+
+ func_extract_archives $gentop $dlprefiles
+ libobjs="$libobjs $func_extract_archives_result"
+ test "X$libobjs" = "X " && libobjs=
+ fi
+
+ save_ifs="$IFS"; IFS='~'
+ for cmd in $cmds; do
+ IFS="$save_ifs"
+ eval cmd=\"$cmd\"
+ $opt_silent || {
+ func_quote_for_expand "$cmd"
+ eval "func_echo $func_quote_for_expand_result"
+ }
+ $opt_dry_run || eval "$cmd" || {
+ lt_exit=$?
+
+ # Restore the uninstalled library and exit
+ if test "$mode" = relink; then
+ ( cd "$output_objdir" && \
+ $RM "${realname}T" && \
+ $MV "${realname}U" "$realname" )
+ fi
+
+ exit $lt_exit
+ }
+ done
+ IFS="$save_ifs"
+
+ # Restore the uninstalled library and exit
+ if test "$mode" = relink; then
+ $opt_dry_run || eval '(cd $output_objdir && $RM ${realname}T && $MV $realname ${realname}T && $MV ${realname}U $realname)' || exit $?
+
+ if test -n "$convenience"; then
+ if test -z "$whole_archive_flag_spec"; then
+ func_show_eval '${RM}r "$gentop"'
+ fi
+ fi
+
+ exit $EXIT_SUCCESS
+ fi
+
+ # Create links to the real library.
+ for linkname in $linknames; do
+ if test "$realname" != "$linkname"; then
+ func_show_eval '(cd "$output_objdir" && $RM "$linkname" && $LN_S "$realname" "$linkname")' 'exit $?'
+ fi
+ done
+
+ # If -module or -export-dynamic was specified, set the dlname.
+ if test "$module" = yes || test "$export_dynamic" = yes; then
+ # On all known operating systems, these are identical.
+ dlname="$soname"
+ fi
+ fi
+ ;;
+
+ obj)
+ if test -n "$dlfiles$dlprefiles" || test "$dlself" != no; then
+ func_warning "\`-dlopen' is ignored for objects"
+ fi
+
+ case " $deplibs" in
+ *\ -l* | *\ -L*)
+ func_warning "\`-l' and \`-L' are ignored for objects" ;;
+ esac
+
+ test -n "$rpath" && \
+ func_warning "\`-rpath' is ignored for objects"
+
+ test -n "$xrpath" && \
+ func_warning "\`-R' is ignored for objects"
+
+ test -n "$vinfo" && \
+ func_warning "\`-version-info' is ignored for objects"
+
+ test -n "$release" && \
+ func_warning "\`-release' is ignored for objects"
+
+ case $output in
+ *.lo)
+ test -n "$objs$old_deplibs" && \
+ func_fatal_error "cannot build library object \`$output' from non-libtool objects"
+
+ libobj=$output
+ func_lo2o "$libobj"
+ obj=$func_lo2o_result
+ ;;
+ *)
+ libobj=
+ obj="$output"
+ ;;
+ esac
+
+ # Delete the old objects.
+ $opt_dry_run || $RM $obj $libobj
+
+ # Objects from convenience libraries. This assumes
+ # single-version convenience libraries. Whenever we create
+ # different ones for PIC/non-PIC, this we'll have to duplicate
+ # the extraction.
+ reload_conv_objs=
+ gentop=
+ # reload_cmds runs $LD directly, so let us get rid of
+ # -Wl from whole_archive_flag_spec and hope we can get by with
+ # turning comma into space..
+ wl=
+
+ if test -n "$convenience"; then
+ if test -n "$whole_archive_flag_spec"; then
+ eval tmp_whole_archive_flags=\"$whole_archive_flag_spec\"
+ reload_conv_objs=$reload_objs\ `$ECHO "X$tmp_whole_archive_flags" | $Xsed -e 's|,| |g'`
+ else
+ gentop="$output_objdir/${obj}x"
+ generated="$generated $gentop"
+
+ func_extract_archives $gentop $convenience
+ reload_conv_objs="$reload_objs $func_extract_archives_result"
+ fi
+ fi
+
+ # Create the old-style object.
+ reload_objs="$objs$old_deplibs "`$ECHO "X$libobjs" | $SP2NL | $Xsed -e '/\.'${libext}$'/d' -e '/\.lib$/d' -e "$lo2o" | $NL2SP`" $reload_conv_objs" ### testsuite: skip nested quoting test
+
+ output="$obj"
+ func_execute_cmds "$reload_cmds" 'exit $?'
+
+ # Exit if we aren't doing a library object file.
+ if test -z "$libobj"; then
+ if test -n "$gentop"; then
+ func_show_eval '${RM}r "$gentop"'
+ fi
+
+ exit $EXIT_SUCCESS
+ fi
+
+ if test "$build_libtool_libs" != yes; then
+ if test -n "$gentop"; then
+ func_show_eval '${RM}r "$gentop"'
+ fi
+
+ # Create an invalid libtool object if no PIC, so that we don't
+ # accidentally link it into a program.
+ # $show "echo timestamp > $libobj"
+ # $opt_dry_run || eval "echo timestamp > $libobj" || exit $?
+ exit $EXIT_SUCCESS
+ fi
+
+ if test -n "$pic_flag" || test "$pic_mode" != default; then
+ # Only do commands if we really have different PIC objects.
+ reload_objs="$libobjs $reload_conv_objs"
+ output="$libobj"
+ func_execute_cmds "$reload_cmds" 'exit $?'
+ fi
+
+ if test -n "$gentop"; then
+ func_show_eval '${RM}r "$gentop"'
+ fi
+
+ exit $EXIT_SUCCESS
+ ;;
+
+ prog)
+ case $host in
+ *cygwin*) func_stripname '' '.exe' "$output"
+ output=$func_stripname_result.exe;;
+ esac
+ test -n "$vinfo" && \
+ func_warning "\`-version-info' is ignored for programs"
+
+ test -n "$release" && \
+ func_warning "\`-release' is ignored for programs"
+
+ test "$preload" = yes \
+ && test "$dlopen_support" = unknown \
+ && test "$dlopen_self" = unknown \
+ && test "$dlopen_self_static" = unknown && \
+ func_warning "\`LT_INIT([dlopen])' not used. Assuming no dlopen support."
+
+ case $host in
+ *-*-rhapsody* | *-*-darwin1.[012])
+ # On Rhapsody replace the C library is the System framework
+ compile_deplibs=`$ECHO "X $compile_deplibs" | $Xsed -e 's/ -lc / System.ltframework /'`
+ finalize_deplibs=`$ECHO "X $finalize_deplibs" | $Xsed -e 's/ -lc / System.ltframework /'`
+ ;;
+ esac
+
+ case $host in
+ *-*-darwin*)
+ # Don't allow lazy linking, it breaks C++ global constructors
+ # But is supposedly fixed on 10.4 or later (yay!).
+ if test "$tagname" = CXX ; then
+ case ${MACOSX_DEPLOYMENT_TARGET-10.0} in
+ 10.[0123])
+ compile_command="$compile_command ${wl}-bind_at_load"
+ finalize_command="$finalize_command ${wl}-bind_at_load"
+ ;;
+ esac
+ fi
+ # Time to change all our "foo.ltframework" stuff back to "-framework foo"
+ compile_deplibs=`$ECHO "X $compile_deplibs" | $Xsed -e 's% \([^ $]*\).ltframework% -framework \1%g'`
+ finalize_deplibs=`$ECHO "X $finalize_deplibs" | $Xsed -e 's% \([^ $]*\).ltframework% -framework \1%g'`
+ ;;
+ esac
+
+
+ # move library search paths that coincide with paths to not yet
+ # installed libraries to the beginning of the library search list
+ new_libs=
+ for path in $notinst_path; do
+ case " $new_libs " in
+ *" -L$path/$objdir "*) ;;
+ *)
+ case " $compile_deplibs " in
+ *" -L$path/$objdir "*)
+ new_libs="$new_libs -L$path/$objdir" ;;
+ esac
+ ;;
+ esac
+ done
+ for deplib in $compile_deplibs; do
+ case $deplib in
+ -L*)
+ case " $new_libs " in
+ *" $deplib "*) ;;
+ *) new_libs="$new_libs $deplib" ;;
+ esac
+ ;;
+ *) new_libs="$new_libs $deplib" ;;
+ esac
+ done
+ compile_deplibs="$new_libs"
+
+
+ compile_command="$compile_command $compile_deplibs"
+ finalize_command="$finalize_command $finalize_deplibs"
+
+ if test -n "$rpath$xrpath"; then
+ # If the user specified any rpath flags, then add them.
+ for libdir in $rpath $xrpath; do
+ # This is the magic to use -rpath.
+ case "$finalize_rpath " in
+ *" $libdir "*) ;;
+ *) finalize_rpath="$finalize_rpath $libdir" ;;
+ esac
+ done
+ fi
+
+ # Now hardcode the library paths
+ rpath=
+ hardcode_libdirs=
+ for libdir in $compile_rpath $finalize_rpath; do
+ if test -n "$hardcode_libdir_flag_spec"; then
+ if test -n "$hardcode_libdir_separator"; then
+ if test -z "$hardcode_libdirs"; then
+ hardcode_libdirs="$libdir"
+ else
+ # Just accumulate the unique libdirs.
+ case $hardcode_libdir_separator$hardcode_libdirs$hardcode_libdir_separator in
+ *"$hardcode_libdir_separator$libdir$hardcode_libdir_separator"*)
+ ;;
+ *)
+ hardcode_libdirs="$hardcode_libdirs$hardcode_libdir_separator$libdir"
+ ;;
+ esac
+ fi
+ else
+ eval flag=\"$hardcode_libdir_flag_spec\"
+ rpath="$rpath $flag"
+ fi
+ elif test -n "$runpath_var"; then
+ case "$perm_rpath " in
+ *" $libdir "*) ;;
+ *) perm_rpath="$perm_rpath $libdir" ;;
+ esac
+ fi
+ case $host in
+ *-*-cygwin* | *-*-mingw* | *-*-pw32* | *-*-os2* | *-cegcc*)
+ testbindir=`${ECHO} "$libdir" | ${SED} -e 's*/lib$*/bin*'`
+ case :$dllsearchpath: in
+ *":$libdir:"*) ;;
+ ::) dllsearchpath=$libdir;;
+ *) dllsearchpath="$dllsearchpath:$libdir";;
+ esac
+ case :$dllsearchpath: in
+ *":$testbindir:"*) ;;
+ ::) dllsearchpath=$testbindir;;
+ *) dllsearchpath="$dllsearchpath:$testbindir";;
+ esac
+ ;;
+ esac
+ done
+ # Substitute the hardcoded libdirs into the rpath.
+ if test -n "$hardcode_libdir_separator" &&
+ test -n "$hardcode_libdirs"; then
+ libdir="$hardcode_libdirs"
+ eval rpath=\" $hardcode_libdir_flag_spec\"
+ fi
+ compile_rpath="$rpath"
+
+ rpath=
+ hardcode_libdirs=
+ for libdir in $finalize_rpath; do
+ if test -n "$hardcode_libdir_flag_spec"; then
+ if test -n "$hardcode_libdir_separator"; then
+ if test -z "$hardcode_libdirs"; then
+ hardcode_libdirs="$libdir"
+ else
+ # Just accumulate the unique libdirs.
+ case $hardcode_libdir_separator$hardcode_libdirs$hardcode_libdir_separator in
+ *"$hardcode_libdir_separator$libdir$hardcode_libdir_separator"*)
+ ;;
+ *)
+ hardcode_libdirs="$hardcode_libdirs$hardcode_libdir_separator$libdir"
+ ;;
+ esac
+ fi
+ else
+ eval flag=\"$hardcode_libdir_flag_spec\"
+ rpath="$rpath $flag"
+ fi
+ elif test -n "$runpath_var"; then
+ case "$finalize_perm_rpath " in
+ *" $libdir "*) ;;
+ *) finalize_perm_rpath="$finalize_perm_rpath $libdir" ;;
+ esac
+ fi
+ done
+ # Substitute the hardcoded libdirs into the rpath.
+ if test -n "$hardcode_libdir_separator" &&
+ test -n "$hardcode_libdirs"; then
+ libdir="$hardcode_libdirs"
+ eval rpath=\" $hardcode_libdir_flag_spec\"
+ fi
+ finalize_rpath="$rpath"
+
+ if test -n "$libobjs" && test "$build_old_libs" = yes; then
+ # Transform all the library objects into standard objects.
+ compile_command=`$ECHO "X$compile_command" | $SP2NL | $Xsed -e "$lo2o" | $NL2SP`
+ finalize_command=`$ECHO "X$finalize_command" | $SP2NL | $Xsed -e "$lo2o" | $NL2SP`
+ fi
+
+ func_generate_dlsyms "$outputname" "@PROGRAM@" "no"
+
+ # template prelinking step
+ if test -n "$prelink_cmds"; then
+ func_execute_cmds "$prelink_cmds" 'exit $?'
+ fi
+
+ wrappers_required=yes
+ case $host in
+ *cygwin* | *mingw* )
+ if test "$build_libtool_libs" != yes; then
+ wrappers_required=no
+ fi
+ ;;
+ *cegcc)
+ # Disable wrappers for cegcc, we are cross compiling anyway.
+ wrappers_required=no
+ ;;
+ *)
+ if test "$need_relink" = no || test "$build_libtool_libs" != yes; then
+ wrappers_required=no
+ fi
+ ;;
+ esac
+ if test "$wrappers_required" = no; then
+ # Replace the output file specification.
+ compile_command=`$ECHO "X$compile_command" | $Xsed -e 's%@OUTPUT@%'"$output"'%g'`
+ link_command="$compile_command$compile_rpath"
+
+ # We have no uninstalled library dependencies, so finalize right now.
+ exit_status=0
+ func_show_eval "$link_command" 'exit_status=$?'
+
+ # Delete the generated files.
+ if test -f "$output_objdir/${outputname}S.${objext}"; then
+ func_show_eval '$RM "$output_objdir/${outputname}S.${objext}"'
+ fi
+
+ exit $exit_status
+ fi
+
+ if test -n "$compile_shlibpath$finalize_shlibpath"; then
+ compile_command="$shlibpath_var=\"$compile_shlibpath$finalize_shlibpath\$$shlibpath_var\" $compile_command"
+ fi
+ if test -n "$finalize_shlibpath"; then
+ finalize_command="$shlibpath_var=\"$finalize_shlibpath\$$shlibpath_var\" $finalize_command"
+ fi
+
+ compile_var=
+ finalize_var=
+ if test -n "$runpath_var"; then
+ if test -n "$perm_rpath"; then
+ # We should set the runpath_var.
+ rpath=
+ for dir in $perm_rpath; do
+ rpath="$rpath$dir:"
+ done
+ compile_var="$runpath_var=\"$rpath\$$runpath_var\" "
+ fi
+ if test -n "$finalize_perm_rpath"; then
+ # We should set the runpath_var.
+ rpath=
+ for dir in $finalize_perm_rpath; do
+ rpath="$rpath$dir:"
+ done
+ finalize_var="$runpath_var=\"$rpath\$$runpath_var\" "
+ fi
+ fi
+
+ if test "$no_install" = yes; then
+ # We don't need to create a wrapper script.
+ link_command="$compile_var$compile_command$compile_rpath"
+ # Replace the output file specification.
+ link_command=`$ECHO "X$link_command" | $Xsed -e 's%@OUTPUT@%'"$output"'%g'`
+ # Delete the old output file.
+ $opt_dry_run || $RM $output
+ # Link the executable and exit
+ func_show_eval "$link_command" 'exit $?'
+ exit $EXIT_SUCCESS
+ fi
+
+ if test "$hardcode_action" = relink; then
+ # Fast installation is not supported
+ link_command="$compile_var$compile_command$compile_rpath"
+ relink_command="$finalize_var$finalize_command$finalize_rpath"
+
+ func_warning "this platform does not like uninstalled shared libraries"
+ func_warning "\`$output' will be relinked during installation"
+ else
+ if test "$fast_install" != no; then
+ link_command="$finalize_var$compile_command$finalize_rpath"
+ if test "$fast_install" = yes; then
+ relink_command=`$ECHO "X$compile_var$compile_command$compile_rpath" | $Xsed -e 's%@OUTPUT@%\$progdir/\$file%g'`
+ else
+ # fast_install is set to needless
+ relink_command=
+ fi
+ else
+ link_command="$compile_var$compile_command$compile_rpath"
+ relink_command="$finalize_var$finalize_command$finalize_rpath"
+ fi
+ fi
+
+ # Replace the output file specification.
+ link_command=`$ECHO "X$link_command" | $Xsed -e 's%@OUTPUT@%'"$output_objdir/$outputname"'%g'`
+
+ # Delete the old output files.
+ $opt_dry_run || $RM $output $output_objdir/$outputname $output_objdir/lt-$outputname
+
+ func_show_eval "$link_command" 'exit $?'
+
+ # Now create the wrapper script.
+ func_verbose "creating $output"
+
+ # Quote the relink command for shipping.
+ if test -n "$relink_command"; then
+ # Preserve any variables that may affect compiler behavior
+ for var in $variables_saved_for_relink; do
+ if eval test -z \"\${$var+set}\"; then
+ relink_command="{ test -z \"\${$var+set}\" || $lt_unset $var || { $var=; export $var; }; }; $relink_command"
+ elif eval var_value=\$$var; test -z "$var_value"; then
+ relink_command="$var=; export $var; $relink_command"
+ else
+ func_quote_for_eval "$var_value"
+ relink_command="$var=$func_quote_for_eval_result; export $var; $relink_command"
+ fi
+ done
+ relink_command="(cd `pwd`; $relink_command)"
+ relink_command=`$ECHO "X$relink_command" | $Xsed -e "$sed_quote_subst"`
+ fi
+
+ # Quote $ECHO for shipping.
+ if test "X$ECHO" = "X$SHELL $progpath --fallback-echo"; then
+ case $progpath in
+ [\\/]* | [A-Za-z]:[\\/]*) qecho="$SHELL $progpath --fallback-echo";;
+ *) qecho="$SHELL `pwd`/$progpath --fallback-echo";;
+ esac
+ qecho=`$ECHO "X$qecho" | $Xsed -e "$sed_quote_subst"`
+ else
+ qecho=`$ECHO "X$ECHO" | $Xsed -e "$sed_quote_subst"`
+ fi
+
+ # Only actually do things if not in dry run mode.
+ $opt_dry_run || {
+ # win32 will think the script is a binary if it has
+ # a .exe suffix, so we strip it off here.
+ case $output in
+ *.exe) func_stripname '' '.exe' "$output"
+ output=$func_stripname_result ;;
+ esac
+ # test for cygwin because mv fails w/o .exe extensions
+ case $host in
+ *cygwin*)
+ exeext=.exe
+ func_stripname '' '.exe' "$outputname"
+ outputname=$func_stripname_result ;;
+ *) exeext= ;;
+ esac
+ case $host in
+ *cygwin* | *mingw* )
+ func_dirname_and_basename "$output" "" "."
+ output_name=$func_basename_result
+ output_path=$func_dirname_result
+ cwrappersource="$output_path/$objdir/lt-$output_name.c"
+ cwrapper="$output_path/$output_name.exe"
+ $RM $cwrappersource $cwrapper
+ trap "$RM $cwrappersource $cwrapper; exit $EXIT_FAILURE" 1 2 15
+
+ func_emit_cwrapperexe_src > $cwrappersource
+
+ # The wrapper executable is built using the $host compiler,
+ # because it contains $host paths and files. If cross-
+ # compiling, it, like the target executable, must be
+ # executed on the $host or under an emulation environment.
+ $opt_dry_run || {
+ $LTCC $LTCFLAGS -o $cwrapper $cwrappersource
+ $STRIP $cwrapper
+ }
+
+ # Now, create the wrapper script for func_source use:
+ func_ltwrapper_scriptname $cwrapper
+ $RM $func_ltwrapper_scriptname_result
+ trap "$RM $func_ltwrapper_scriptname_result; exit $EXIT_FAILURE" 1 2 15
+ $opt_dry_run || {
+ # note: this script will not be executed, so do not chmod.
+ if test "x$build" = "x$host" ; then
+ $cwrapper --lt-dump-script > $func_ltwrapper_scriptname_result
+ else
+ func_emit_wrapper no > $func_ltwrapper_scriptname_result
+ fi
+ }
+ ;;
+ * )
+ $RM $output
+ trap "$RM $output; exit $EXIT_FAILURE" 1 2 15
+
+ func_emit_wrapper no > $output
+ chmod +x $output
+ ;;
+ esac
+ }
+ exit $EXIT_SUCCESS
+ ;;
+ esac
+
+ # See if we need to build an old-fashioned archive.
+ for oldlib in $oldlibs; do
+
+ if test "$build_libtool_libs" = convenience; then
+ oldobjs="$libobjs_save $symfileobj"
+ addlibs="$convenience"
+ build_libtool_libs=no
+ else
+ if test "$build_libtool_libs" = module; then
+ oldobjs="$libobjs_save"
+ build_libtool_libs=no
+ else
+ oldobjs="$old_deplibs $non_pic_objects"
+ if test "$preload" = yes && test -f "$symfileobj"; then
+ oldobjs="$oldobjs $symfileobj"
+ fi
+ fi
+ addlibs="$old_convenience"
+ fi
+
+ if test -n "$addlibs"; then
+ gentop="$output_objdir/${outputname}x"
+ generated="$generated $gentop"
+
+ func_extract_archives $gentop $addlibs
+ oldobjs="$oldobjs $func_extract_archives_result"
+ fi
+
+ # Do each command in the archive commands.
+ if test -n "$old_archive_from_new_cmds" && test "$build_libtool_libs" = yes; then
+ cmds=$old_archive_from_new_cmds
+ else
+
+ # Add any objects from preloaded convenience libraries
+ if test -n "$dlprefiles"; then
+ gentop="$output_objdir/${outputname}x"
+ generated="$generated $gentop"
+
+ func_extract_archives $gentop $dlprefiles
+ oldobjs="$oldobjs $func_extract_archives_result"
+ fi
+
+ # POSIX demands no paths to be encoded in archives. We have
+ # to avoid creating archives with duplicate basenames if we
+ # might have to extract them afterwards, e.g., when creating a
+ # static archive out of a convenience library, or when linking
+ # the entirety of a libtool archive into another (currently
+ # not supported by libtool).
+ if (for obj in $oldobjs
+ do
+ func_basename "$obj"
+ $ECHO "$func_basename_result"
+ done | sort | sort -uc >/dev/null 2>&1); then
+ :
+ else
+ $ECHO "copying selected object files to avoid basename conflicts..."
+ gentop="$output_objdir/${outputname}x"
+ generated="$generated $gentop"
+ func_mkdir_p "$gentop"
+ save_oldobjs=$oldobjs
+ oldobjs=
+ counter=1
+ for obj in $save_oldobjs
+ do
+ func_basename "$obj"
+ objbase="$func_basename_result"
+ case " $oldobjs " in
+ " ") oldobjs=$obj ;;
+ *[\ /]"$objbase "*)
+ while :; do
+ # Make sure we don't pick an alternate name that also
+ # overlaps.
+ newobj=lt$counter-$objbase
+ func_arith $counter + 1
+ counter=$func_arith_result
+ case " $oldobjs " in
+ *[\ /]"$newobj "*) ;;
+ *) if test ! -f "$gentop/$newobj"; then break; fi ;;
+ esac
+ done
+ func_show_eval "ln $obj $gentop/$newobj || cp $obj $gentop/$newobj"
+ oldobjs="$oldobjs $gentop/$newobj"
+ ;;
+ *) oldobjs="$oldobjs $obj" ;;
+ esac
+ done
+ fi
+ eval cmds=\"$old_archive_cmds\"
+
+ func_len " $cmds"
+ len=$func_len_result
+ if test "$len" -lt "$max_cmd_len" || test "$max_cmd_len" -le -1; then
+ cmds=$old_archive_cmds
+ else
+ # the command line is too long to link in one step, link in parts
+ func_verbose "using piecewise archive linking..."
+ save_RANLIB=$RANLIB
+ RANLIB=:
+ objlist=
+ concat_cmds=
+ save_oldobjs=$oldobjs
+ oldobjs=
+ # Is there a better way of finding the last object in the list?
+ for obj in $save_oldobjs
+ do
+ last_oldobj=$obj
+ done
+ eval test_cmds=\"$old_archive_cmds\"
+ func_len " $test_cmds"
+ len0=$func_len_result
+ len=$len0
+ for obj in $save_oldobjs
+ do
+ func_len " $obj"
+ func_arith $len + $func_len_result
+ len=$func_arith_result
+ func_append objlist " $obj"
+ if test "$len" -lt "$max_cmd_len"; then
+ :
+ else
+ # the above command should be used before it gets too long
+ oldobjs=$objlist
+ if test "$obj" = "$last_oldobj" ; then
+ RANLIB=$save_RANLIB
+ fi
+ test -z "$concat_cmds" || concat_cmds=$concat_cmds~
+ eval concat_cmds=\"\${concat_cmds}$old_archive_cmds\"
+ objlist=
+ len=$len0
+ fi
+ done
+ RANLIB=$save_RANLIB
+ oldobjs=$objlist
+ if test "X$oldobjs" = "X" ; then
+ eval cmds=\"\$concat_cmds\"
+ else
+ eval cmds=\"\$concat_cmds~\$old_archive_cmds\"
+ fi
+ fi
+ fi
+ func_execute_cmds "$cmds" 'exit $?'
+ done
+
+ test -n "$generated" && \
+ func_show_eval "${RM}r$generated"
+
+ # Now create the libtool archive.
+ case $output in
+ *.la)
+ old_library=
+ test "$build_old_libs" = yes && old_library="$libname.$libext"
+ func_verbose "creating $output"
+
+ # Preserve any variables that may affect compiler behavior
+ for var in $variables_saved_for_relink; do
+ if eval test -z \"\${$var+set}\"; then
+ relink_command="{ test -z \"\${$var+set}\" || $lt_unset $var || { $var=; export $var; }; }; $relink_command"
+ elif eval var_value=\$$var; test -z "$var_value"; then
+ relink_command="$var=; export $var; $relink_command"
+ else
+ func_quote_for_eval "$var_value"
+ relink_command="$var=$func_quote_for_eval_result; export $var; $relink_command"
+ fi
+ done
+ # Quote the link command for shipping.
+ relink_command="(cd `pwd`; $SHELL $progpath $preserve_args --mode=relink $libtool_args @inst_prefix_dir@)"
+ relink_command=`$ECHO "X$relink_command" | $Xsed -e "$sed_quote_subst"`
+ if test "$hardcode_automatic" = yes ; then
+ relink_command=
+ fi
+
+ # Only create the output if not a dry run.
+ $opt_dry_run || {
+ for installed in no yes; do
+ if test "$installed" = yes; then
+ if test -z "$install_libdir"; then
+ break
+ fi
+ output="$output_objdir/$outputname"i
+ # Replace all uninstalled libtool libraries with the installed ones
+ newdependency_libs=
+ for deplib in $dependency_libs; do
+ case $deplib in
+ *.la)
+ func_basename "$deplib"
+ name="$func_basename_result"
+ eval libdir=`${SED} -n -e 's/^libdir=\(.*\)$/\1/p' $deplib`
+ test -z "$libdir" && \
+ func_fatal_error "\`$deplib' is not a valid libtool archive"
+ newdependency_libs="$newdependency_libs $libdir/$name"
+ ;;
+ *) newdependency_libs="$newdependency_libs $deplib" ;;
+ esac
+ done
+ dependency_libs="$newdependency_libs"
+ newdlfiles=
+
+ for lib in $dlfiles; do
+ case $lib in
+ *.la)
+ func_basename "$lib"
+ name="$func_basename_result"
+ eval libdir=`${SED} -n -e 's/^libdir=\(.*\)$/\1/p' $lib`
+ test -z "$libdir" && \
+ func_fatal_error "\`$lib' is not a valid libtool archive"
+ newdlfiles="$newdlfiles $libdir/$name"
+ ;;
+ *) newdlfiles="$newdlfiles $lib" ;;
+ esac
+ done
+ dlfiles="$newdlfiles"
+ newdlprefiles=
+ for lib in $dlprefiles; do
+ case $lib in
+ *.la)
+ # Only pass preopened files to the pseudo-archive (for
+ # eventual linking with the app. that links it) if we
+ # didn't already link the preopened objects directly into
+ # the library:
+ func_basename "$lib"
+ name="$func_basename_result"
+ eval libdir=`${SED} -n -e 's/^libdir=\(.*\)$/\1/p' $lib`
+ test -z "$libdir" && \
+ func_fatal_error "\`$lib' is not a valid libtool archive"
+ newdlprefiles="$newdlprefiles $libdir/$name"
+ ;;
+ esac
+ done
+ dlprefiles="$newdlprefiles"
+ else
+ newdlfiles=
+ for lib in $dlfiles; do
+ case $lib in
+ [\\/]* | [A-Za-z]:[\\/]*) abs="$lib" ;;
+ *) abs=`pwd`"/$lib" ;;
+ esac
+ newdlfiles="$newdlfiles $abs"
+ done
+ dlfiles="$newdlfiles"
+ newdlprefiles=
+ for lib in $dlprefiles; do
+ case $lib in
+ [\\/]* | [A-Za-z]:[\\/]*) abs="$lib" ;;
+ *) abs=`pwd`"/$lib" ;;
+ esac
+ newdlprefiles="$newdlprefiles $abs"
+ done
+ dlprefiles="$newdlprefiles"
+ fi
+ $RM $output
+ # place dlname in correct position for cygwin
+ tdlname=$dlname
+ case $host,$output,$installed,$module,$dlname in
+ *cygwin*,*lai,yes,no,*.dll | *mingw*,*lai,yes,no,*.dll | *cegcc*,*lai,yes,no,*.dll) tdlname=../bin/$dlname ;;
+ esac
+ $ECHO > $output "\
+# $outputname - a libtool library file
+# Generated by $PROGRAM (GNU $PACKAGE$TIMESTAMP) $VERSION
+#
+# Please DO NOT delete this file!
+# It is necessary for linking the library.
+
+# The name that we can dlopen(3).
+dlname='$tdlname'
+
+# Names of this library.
+library_names='$library_names'
+
+# The name of the static archive.
+old_library='$old_library'
+
+# Linker flags that can not go in dependency_libs.
+inherited_linker_flags='$new_inherited_linker_flags'
+
+# Libraries that this one depends upon.
+dependency_libs='$dependency_libs'
+
+# Names of additional weak libraries provided by this library
+weak_library_names='$weak_libs'
+
+# Version information for $libname.
+current=$current
+age=$age
+revision=$revision
+
+# Is this an already installed library?
+installed=$installed
+
+# Should we warn about portability when linking against -modules?
+shouldnotlink=$module
+
+# Files to dlopen/dlpreopen
+dlopen='$dlfiles'
+dlpreopen='$dlprefiles'
+
+# Directory that this library needs to be installed in:
+libdir='$install_libdir'"
+ if test "$installed" = no && test "$need_relink" = yes; then
+ $ECHO >> $output "\
+relink_command=\"$relink_command\""
+ fi
+ done
+ }
+
+ # Do a symbolic link so that the libtool archive can be found in
+ # LD_LIBRARY_PATH before the program is installed.
+ func_show_eval '( cd "$output_objdir" && $RM "$outputname" && $LN_S "../$outputname" "$outputname" )' 'exit $?'
+ ;;
+ esac
+ exit $EXIT_SUCCESS
+}
+
+{ test "$mode" = link || test "$mode" = relink; } &&
+ func_mode_link ${1+"$@"}
+
+
+# func_mode_uninstall arg...
+func_mode_uninstall ()
+{
+ $opt_debug
+ RM="$nonopt"
+ files=
+ rmforce=
+ exit_status=0
+
+ # This variable tells wrapper scripts just to set variables rather
+ # than running their programs.
+ libtool_install_magic="$magic"
+
+ for arg
+ do
+ case $arg in
+ -f) RM="$RM $arg"; rmforce=yes ;;
+ -*) RM="$RM $arg" ;;
+ *) files="$files $arg" ;;
+ esac
+ done
+
+ test -z "$RM" && \
+ func_fatal_help "you must specify an RM program"
+
+ rmdirs=
+
+ origobjdir="$objdir"
+ for file in $files; do
+ func_dirname "$file" "" "."
+ dir="$func_dirname_result"
+ if test "X$dir" = X.; then
+ objdir="$origobjdir"
+ else
+ objdir="$dir/$origobjdir"
+ fi
+ func_basename "$file"
+ name="$func_basename_result"
+ test "$mode" = uninstall && objdir="$dir"
+
+ # Remember objdir for removal later, being careful to avoid duplicates
+ if test "$mode" = clean; then
+ case " $rmdirs " in
+ *" $objdir "*) ;;
+ *) rmdirs="$rmdirs $objdir" ;;
+ esac
+ fi
+
+ # Don't error if the file doesn't exist and rm -f was used.
+ if { test -L "$file"; } >/dev/null 2>&1 ||
+ { test -h "$file"; } >/dev/null 2>&1 ||
+ test -f "$file"; then
+ :
+ elif test -d "$file"; then
+ exit_status=1
+ continue
+ elif test "$rmforce" = yes; then
+ continue
+ fi
+
+ rmfiles="$file"
+
+ case $name in
+ *.la)
+ # Possibly a libtool archive, so verify it.
+ if func_lalib_p "$file"; then
+ func_source $dir/$name
+
+ # Delete the libtool libraries and symlinks.
+ for n in $library_names; do
+ rmfiles="$rmfiles $objdir/$n"
+ done
+ test -n "$old_library" && rmfiles="$rmfiles $objdir/$old_library"
+
+ case "$mode" in
+ clean)
+ case " $library_names " in
+ # " " in the beginning catches empty $dlname
+ *" $dlname "*) ;;
+ *) rmfiles="$rmfiles $objdir/$dlname" ;;
+ esac
+ test -n "$libdir" && rmfiles="$rmfiles $objdir/$name $objdir/${name}i"
+ ;;
+ uninstall)
+ if test -n "$library_names"; then
+ # Do each command in the postuninstall commands.
+ func_execute_cmds "$postuninstall_cmds" 'test "$rmforce" = yes || exit_status=1'
+ fi
+
+ if test -n "$old_library"; then
+ # Do each command in the old_postuninstall commands.
+ func_execute_cmds "$old_postuninstall_cmds" 'test "$rmforce" = yes || exit_status=1'
+ fi
+ # FIXME: should reinstall the best remaining shared library.
+ ;;
+ esac
+ fi
+ ;;
+
+ *.lo)
+ # Possibly a libtool object, so verify it.
+ if func_lalib_p "$file"; then
+
+ # Read the .lo file
+ func_source $dir/$name
+
+ # Add PIC object to the list of files to remove.
+ if test -n "$pic_object" &&
+ test "$pic_object" != none; then
+ rmfiles="$rmfiles $dir/$pic_object"
+ fi
+
+ # Add non-PIC object to the list of files to remove.
+ if test -n "$non_pic_object" &&
+ test "$non_pic_object" != none; then
+ rmfiles="$rmfiles $dir/$non_pic_object"
+ fi
+ fi
+ ;;
+
+ *)
+ if test "$mode" = clean ; then
+ noexename=$name
+ case $file in
+ *.exe)
+ func_stripname '' '.exe' "$file"
+ file=$func_stripname_result
+ func_stripname '' '.exe' "$name"
+ noexename=$func_stripname_result
+ # $file with .exe has already been added to rmfiles,
+ # add $file without .exe
+ rmfiles="$rmfiles $file"
+ ;;
+ esac
+ # Do a test to see if this is a libtool program.
+ if func_ltwrapper_p "$file"; then
+ if func_ltwrapper_executable_p "$file"; then
+ func_ltwrapper_scriptname "$file"
+ relink_command=
+ func_source $func_ltwrapper_scriptname_result
+ rmfiles="$rmfiles $func_ltwrapper_scriptname_result"
+ else
+ relink_command=
+ func_source $dir/$noexename
+ fi
+
+ # note $name still contains .exe if it was in $file originally
+ # as does the version of $file that was added into $rmfiles
+ rmfiles="$rmfiles $objdir/$name $objdir/${name}S.${objext}"
+ if test "$fast_install" = yes && test -n "$relink_command"; then
+ rmfiles="$rmfiles $objdir/lt-$name"
+ fi
+ if test "X$noexename" != "X$name" ; then
+ rmfiles="$rmfiles $objdir/lt-${noexename}.c"
+ fi
+ fi
+ fi
+ ;;
+ esac
+ func_show_eval "$RM $rmfiles" 'exit_status=1'
+ done
+ objdir="$origobjdir"
+
+ # Try to remove the ${objdir}s in the directories where we deleted files
+ for dir in $rmdirs; do
+ if test -d "$dir"; then
+ func_show_eval "rmdir $dir >/dev/null 2>&1"
+ fi
+ done
+
+ exit $exit_status
+}
+
+{ test "$mode" = uninstall || test "$mode" = clean; } &&
+ func_mode_uninstall ${1+"$@"}
+
+test -z "$mode" && {
+ help="$generic_help"
+ func_fatal_help "you must specify a MODE"
+}
+
+test -z "$exec_cmd" && \
+ func_fatal_help "invalid operation mode \`$mode'"
+
+if test -n "$exec_cmd"; then
+ eval exec "$exec_cmd"
+ exit $EXIT_FAILURE
+fi
+
+exit $exit_status
+
+
+# The TAGs below are defined such that we never get into a situation
+# in which we disable both kinds of libraries. Given conflicting
+# choices, we go for a static library, that is the most portable,
+# since we can't tell whether shared libraries were disabled because
+# the user asked for that or because the platform doesn't support
+# them. This is particularly important on AIX, because we don't
+# support having both static and shared libraries enabled at the same
+# time on that platform, so we default to a shared-only configuration.
+# If a disable-shared tag is given, we'll fallback to a static-only
+# configuration. But we'll never go from static-only to shared-only.
+
+# ### BEGIN LIBTOOL TAG CONFIG: disable-shared
+build_libtool_libs=no
+build_old_libs=yes
+# ### END LIBTOOL TAG CONFIG: disable-shared
+
+# ### BEGIN LIBTOOL TAG CONFIG: disable-static
+build_old_libs=`case $build_libtool_libs in yes) echo no;; *) echo yes;; esac`
+# ### END LIBTOOL TAG CONFIG: disable-static
+
+# Local Variables:
+# mode:shell-script
+# sh-indentation:2
+# End:
+# vi:sw=2
+
diff --git a/Build/source/utils/xz-4.999.8beta/missing b/Build/source/utils/xz-4.999.9beta/build-aux/missing
index 28055d2ae6f..28055d2ae6f 100755
--- a/Build/source/utils/xz-4.999.8beta/missing
+++ b/Build/source/utils/xz-4.999.9beta/build-aux/missing
diff --git a/Build/source/utils/xz-4.999.8beta/config.h.in b/Build/source/utils/xz-4.999.9beta/config.h.in
index 2ff7988040a..0e31e37e4c3 100644
--- a/Build/source/utils/xz-4.999.8beta/config.h.in
+++ b/Build/source/utils/xz-4.999.9beta/config.h.in
@@ -1,5 +1,8 @@
/* config.h.in. Generated from configure.ac by autoheader. */
+/* Define if building universal (internal helper macro) */
+#undef AC_APPLE_UNIVERSAL_BUILD
+
/* Define to 1 if translation of program messages to the user's native
language is requested. */
#undef ENABLE_NLS
@@ -39,6 +42,14 @@
/* Define to 1 if sha256 integrity check is enabled. */
#undef HAVE_CHECK_SHA256
+/* Define to 1 if the number of available CPU cores can be detected with
+ sysconf(_SC_NPROCESSORS_ONLN). */
+#undef HAVE_CPUCORES_SYSCONF
+
+/* Define to 1 if the number of available CPU cores can be detected with
+ sysctl(). */
+#undef HAVE_CPUCORES_SYSCTL
+
/* Define if the GNU dcgettext() function is already present or preinstalled.
*/
#undef HAVE_DCGETTEXT
@@ -130,6 +141,9 @@
/* Define to 1 if you have the <getopt.h> header file. */
#undef HAVE_GETOPT_H
+/* Define to 1 if you have the `getopt_long' function. */
+#undef HAVE_GETOPT_LONG
+
/* Define if the GNU gettext() function is already present or preinstalled. */
#undef HAVE_GETTEXT
@@ -160,14 +174,6 @@
/* Define to 1 to enable hc4 match finder. */
#undef HAVE_MF_HC4
-/* Define to 1 if the number of available CPU cores can be detected with
- sysconf(_SC_NPROCESSORS_ONLN). */
-#undef HAVE_NCPU_SYSCONF
-
-/* Define to 1 if the number of available CPU cores can be detected with
- sysctl(). */
-#undef HAVE_NCPU_SYSCTL
-
/* Define to 1 if getopt.h declares extern int optreset. */
#undef HAVE_OPTRESET
@@ -179,6 +185,10 @@
*/
#undef HAVE_PHYSMEM_SYSCTL
+/* Define to 1 if the amount of physical memory can be detected with Linux
+ sysinfo(). */
+#undef HAVE_PHYSMEM_SYSINFO
+
/* Define if you have POSIX threads libraries and header files. */
#undef HAVE_PTHREAD
@@ -200,19 +210,19 @@
/* Define to 1 if you have the <string.h> header file. */
#undef HAVE_STRING_H
-/* Define to 1 if `st_atimensec' is member of `struct stat'. */
+/* Define to 1 if `struct stat' is a member of `st_atimensec'. */
#undef HAVE_STRUCT_STAT_ST_ATIMENSEC
-/* Define to 1 if `st_atimespec.tv_nsec' is member of `struct stat'. */
+/* Define to 1 if `struct stat' is a member of `st_atimespec.tv_nsec'. */
#undef HAVE_STRUCT_STAT_ST_ATIMESPEC_TV_NSEC
-/* Define to 1 if `st_atim.st__tim.tv_nsec' is member of `struct stat'. */
+/* Define to 1 if `struct stat' is a member of `st_atim.st__tim.tv_nsec'. */
#undef HAVE_STRUCT_STAT_ST_ATIM_ST__TIM_TV_NSEC
-/* Define to 1 if `st_atim.tv_nsec' is member of `struct stat'. */
+/* Define to 1 if `struct stat' is a member of `st_atim.tv_nsec'. */
#undef HAVE_STRUCT_STAT_ST_ATIM_TV_NSEC
-/* Define to 1 if `st_uatime' is member of `struct stat'. */
+/* Define to 1 if `struct stat' is a member of `st_uatime'. */
#undef HAVE_STRUCT_STAT_ST_UATIME
/* Define to 1 if you have the <sys/param.h> header file. */
@@ -249,6 +259,10 @@
/* Define to 1 if the system has the type `_Bool'. */
#undef HAVE__BOOL
+/* Define to the sub-directory in which libtool stores uninstalled libraries.
+ */
+#undef LT_OBJDIR
+
/* Define to 1 to disable debugging code. */
#undef NDEBUG
@@ -261,6 +275,9 @@
/* Define to the address where bug reports for this package should be sent. */
#undef PACKAGE_BUGREPORT
+/* Define to the URL of the home page of this package. */
+#undef PACKAGE_HOMEPAGE
+
/* Define to the full name of this package. */
#undef PACKAGE_NAME
@@ -270,6 +287,9 @@
/* Define to the one symbol short name of this package. */
#undef PACKAGE_TARNAME
+/* Define to the home page for this package. */
+#undef PACKAGE_URL
+
/* Define to the version of this package. */
#undef PACKAGE_VERSION
@@ -283,15 +303,41 @@
/* Define to 1 if you have the ANSI C header files. */
#undef STDC_HEADERS
+/* Enable extensions on AIX 3, Interix. */
+#ifndef _ALL_SOURCE
+# undef _ALL_SOURCE
+#endif
+/* Enable GNU extensions on systems that have them. */
+#ifndef _GNU_SOURCE
+# undef _GNU_SOURCE
+#endif
+/* Enable threading extensions on Solaris. */
+#ifndef _POSIX_PTHREAD_SEMANTICS
+# undef _POSIX_PTHREAD_SEMANTICS
+#endif
+/* Enable extensions on HP NonStop. */
+#ifndef _TANDEM_SOURCE
+# undef _TANDEM_SOURCE
+#endif
+/* Enable general extensions on Solaris. */
+#ifndef __EXTENSIONS__
+# undef __EXTENSIONS__
+#endif
+
+
/* Version number of package */
#undef VERSION
/* Define WORDS_BIGENDIAN to 1 if your processor stores words with the most
- significant byte first (like Motorola and SPARC, unlike Intel and VAX). */
-#if defined __BIG_ENDIAN__
-# define WORDS_BIGENDIAN 1
-#elif ! defined __LITTLE_ENDIAN__
-# undef WORDS_BIGENDIAN
+ significant byte first (like Motorola and SPARC, unlike Intel). */
+#if defined AC_APPLE_UNIVERSAL_BUILD
+# if defined __BIG_ENDIAN__
+# define WORDS_BIGENDIAN 1
+# endif
+#else
+# ifndef WORDS_BIGENDIAN
+# undef WORDS_BIGENDIAN
+# endif
#endif
/* Number of bits in a file offset, on hosts where this is settable. */
@@ -325,28 +371,6 @@
#define below would cause a syntax error. */
#undef _UINT8_T
-/* Enable extensions on AIX 3, Interix. */
-#ifndef _ALL_SOURCE
-# undef _ALL_SOURCE
-#endif
-/* Enable GNU extensions on systems that have them. */
-#ifndef _GNU_SOURCE
-# undef _GNU_SOURCE
-#endif
-/* Enable threading extensions on Solaris. */
-#ifndef _POSIX_PTHREAD_SEMANTICS
-# undef _POSIX_PTHREAD_SEMANTICS
-#endif
-/* Enable extensions on HP NonStop. */
-#ifndef _TANDEM_SOURCE
-# undef _TANDEM_SOURCE
-#endif
-/* Enable general extensions on Solaris. */
-#ifndef __EXTENSIONS__
-# undef __EXTENSIONS__
-#endif
-
-
/* Define to rpl_ if the getopt replacement functions and variables should be
used. */
#undef __GETOPT_PREFIX
diff --git a/Build/source/utils/xz-4.999.9beta/configure b/Build/source/utils/xz-4.999.9beta/configure
new file mode 100755
index 00000000000..317cb88a26d
--- /dev/null
+++ b/Build/source/utils/xz-4.999.9beta/configure
@@ -0,0 +1,19363 @@
+#! /bin/sh
+# Guess values for system-dependent variables and create Makefiles.
+# Generated by GNU Autoconf 2.64 for XZ Utils 4.999.9beta.
+#
+# Report bugs to <lasse.collin@tukaani.org>.
+#
+# Copyright (C) 1992, 1993, 1994, 1995, 1996, 1998, 1999, 2000, 2001,
+# 2002, 2003, 2004, 2005, 2006, 2007, 2008, 2009 Free Software
+# Foundation, Inc.
+#
+# This configure script is free software; the Free Software Foundation
+# gives unlimited permission to copy, distribute and modify it.
+## -------------------- ##
+## M4sh Initialization. ##
+## -------------------- ##
+
+# Be more Bourne compatible
+DUALCASE=1; export DUALCASE # for MKS sh
+if test -n "${ZSH_VERSION+set}" && (emulate sh) >/dev/null 2>&1; then :
+ emulate sh
+ NULLCMD=:
+ # Pre-4.2 versions of Zsh do word splitting on ${1+"$@"}, which
+ # is contrary to our usage. Disable this feature.
+ alias -g '${1+"$@"}'='"$@"'
+ setopt NO_GLOB_SUBST
+else
+ case `(set -o) 2>/dev/null` in #(
+ *posix*) :
+ set -o posix ;; #(
+ *) :
+ ;;
+esac
+fi
+
+
+as_nl='
+'
+export as_nl
+# Printing a long string crashes Solaris 7 /usr/bin/printf.
+as_echo='\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\'
+as_echo=$as_echo$as_echo$as_echo$as_echo$as_echo
+as_echo=$as_echo$as_echo$as_echo$as_echo$as_echo$as_echo
+# Prefer a ksh shell builtin over an external printf program on Solaris,
+# but without wasting forks for bash or zsh.
+if test -z "$BASH_VERSION$ZSH_VERSION" \
+ && (test "X`print -r -- $as_echo`" = "X$as_echo") 2>/dev/null; then
+ as_echo='print -r --'
+ as_echo_n='print -rn --'
+elif (test "X`printf %s $as_echo`" = "X$as_echo") 2>/dev/null; then
+ as_echo='printf %s\n'
+ as_echo_n='printf %s'
+else
+ if test "X`(/usr/ucb/echo -n -n $as_echo) 2>/dev/null`" = "X-n $as_echo"; then
+ as_echo_body='eval /usr/ucb/echo -n "$1$as_nl"'
+ as_echo_n='/usr/ucb/echo -n'
+ else
+ as_echo_body='eval expr "X$1" : "X\\(.*\\)"'
+ as_echo_n_body='eval
+ arg=$1;
+ case $arg in #(
+ *"$as_nl"*)
+ expr "X$arg" : "X\\(.*\\)$as_nl";
+ arg=`expr "X$arg" : ".*$as_nl\\(.*\\)"`;;
+ esac;
+ expr "X$arg" : "X\\(.*\\)" | tr -d "$as_nl"
+ '
+ export as_echo_n_body
+ as_echo_n='sh -c $as_echo_n_body as_echo'
+ fi
+ export as_echo_body
+ as_echo='sh -c $as_echo_body as_echo'
+fi
+
+# The user is always right.
+if test "${PATH_SEPARATOR+set}" != set; then
+ PATH_SEPARATOR=:
+ (PATH='/bin;/bin'; FPATH=$PATH; sh -c :) >/dev/null 2>&1 && {
+ (PATH='/bin:/bin'; FPATH=$PATH; sh -c :) >/dev/null 2>&1 ||
+ PATH_SEPARATOR=';'
+ }
+fi
+
+
+# IFS
+# We need space, tab and new line, in precisely that order. Quoting is
+# there to prevent editors from complaining about space-tab.
+# (If _AS_PATH_WALK were called with IFS unset, it would disable word
+# splitting by setting IFS to empty value.)
+IFS=" "" $as_nl"
+
+# Find who we are. Look in the path if we contain no directory separator.
+case $0 in #((
+ *[\\/]* ) as_myself=$0 ;;
+ *) as_save_IFS=$IFS; IFS=$PATH_SEPARATOR
+for as_dir in $PATH
+do
+ IFS=$as_save_IFS
+ test -z "$as_dir" && as_dir=.
+ test -r "$as_dir/$0" && as_myself=$as_dir/$0 && break
+ done
+IFS=$as_save_IFS
+
+ ;;
+esac
+# We did not find ourselves, most probably we were run as `sh COMMAND'
+# in which case we are not to be found in the path.
+if test "x$as_myself" = x; then
+ as_myself=$0
+fi
+if test ! -f "$as_myself"; then
+ $as_echo "$as_myself: error: cannot find myself; rerun with an absolute file name" >&2
+ exit 1
+fi
+
+# Unset variables that we do not need and which cause bugs (e.g. in
+# pre-3.0 UWIN ksh). But do not cause bugs in bash 2.01; the "|| exit 1"
+# suppresses any "Segmentation fault" message there. '((' could
+# trigger a bug in pdksh 5.2.14.
+for as_var in BASH_ENV ENV MAIL MAILPATH
+do eval test x\${$as_var+set} = xset \
+ && ( (unset $as_var) || exit 1) >/dev/null 2>&1 && unset $as_var || :
+done
+PS1='$ '
+PS2='> '
+PS4='+ '
+
+# NLS nuisances.
+LC_ALL=C
+export LC_ALL
+LANGUAGE=C
+export LANGUAGE
+
+# CDPATH.
+(unset CDPATH) >/dev/null 2>&1 && unset CDPATH
+
+if test "x$CONFIG_SHELL" = x; then
+ as_bourne_compatible="if test -n \"\${ZSH_VERSION+set}\" && (emulate sh) >/dev/null 2>&1; then :
+ emulate sh
+ NULLCMD=:
+ # Pre-4.2 versions of Zsh do word splitting on \${1+\"\$@\"}, which
+ # is contrary to our usage. Disable this feature.
+ alias -g '\${1+\"\$@\"}'='\"\$@\"'
+ setopt NO_GLOB_SUBST
+else
+ case \`(set -o) 2>/dev/null\` in #(
+ *posix*) :
+ set -o posix ;; #(
+ *) :
+ ;;
+esac
+fi
+"
+ as_required="as_fn_return () { (exit \$1); }
+as_fn_success () { as_fn_return 0; }
+as_fn_failure () { as_fn_return 1; }
+as_fn_ret_success () { return 0; }
+as_fn_ret_failure () { return 1; }
+
+exitcode=0
+as_fn_success || { exitcode=1; echo as_fn_success failed.; }
+as_fn_failure && { exitcode=1; echo as_fn_failure succeeded.; }
+as_fn_ret_success || { exitcode=1; echo as_fn_ret_success failed.; }
+as_fn_ret_failure && { exitcode=1; echo as_fn_ret_failure succeeded.; }
+if ( set x; as_fn_ret_success y && test x = \"\$1\" ); then :
+
+else
+ exitcode=1; echo positional parameters were not saved.
+fi
+test x\$exitcode = x0 || exit 1"
+ as_suggested=" as_lineno_1=";as_suggested=$as_suggested$LINENO;as_suggested=$as_suggested" as_lineno_1a=\$LINENO
+ as_lineno_2=";as_suggested=$as_suggested$LINENO;as_suggested=$as_suggested" as_lineno_2a=\$LINENO
+ eval 'test \"x\$as_lineno_1'\$as_run'\" != \"x\$as_lineno_2'\$as_run'\" &&
+ test \"x\`expr \$as_lineno_1'\$as_run' + 1\`\" = \"x\$as_lineno_2'\$as_run'\"' || exit 1
+test \$(( 1 + 1 )) = 2 || exit 1"
+ if (eval "$as_required") 2>/dev/null; then :
+ as_have_required=yes
+else
+ as_have_required=no
+fi
+ if test x$as_have_required = xyes && (eval "$as_suggested") 2>/dev/null; then :
+
+else
+ as_save_IFS=$IFS; IFS=$PATH_SEPARATOR
+as_found=false
+for as_dir in /bin$PATH_SEPARATOR/usr/bin$PATH_SEPARATOR$PATH
+do
+ IFS=$as_save_IFS
+ test -z "$as_dir" && as_dir=.
+ as_found=:
+ case $as_dir in #(
+ /*)
+ for as_base in sh bash ksh sh5; do
+ # Try only shells that exist, to save several forks.
+ as_shell=$as_dir/$as_base
+ if { test -f "$as_shell" || test -f "$as_shell.exe"; } &&
+ { $as_echo "$as_bourne_compatible""$as_required" | as_run=a "$as_shell"; } 2>/dev/null; then :
+ CONFIG_SHELL=$as_shell as_have_required=yes
+ if { $as_echo "$as_bourne_compatible""$as_suggested" | as_run=a "$as_shell"; } 2>/dev/null; then :
+ break 2
+fi
+fi
+ done;;
+ esac
+ as_found=false
+done
+$as_found || { if { test -f "$SHELL" || test -f "$SHELL.exe"; } &&
+ { $as_echo "$as_bourne_compatible""$as_required" | as_run=a "$SHELL"; } 2>/dev/null; then :
+ CONFIG_SHELL=$SHELL as_have_required=yes
+fi; }
+IFS=$as_save_IFS
+
+
+ if test "x$CONFIG_SHELL" != x; then :
+ # We cannot yet assume a decent shell, so we have to provide a
+ # neutralization value for shells without unset; and this also
+ # works around shells that cannot unset nonexistent variables.
+ BASH_ENV=/dev/null
+ ENV=/dev/null
+ (unset BASH_ENV) >/dev/null 2>&1 && unset BASH_ENV ENV
+ export CONFIG_SHELL
+ exec "$CONFIG_SHELL" "$as_myself" ${1+"$@"}
+fi
+
+ if test x$as_have_required = xno; then :
+ $as_echo "$0: This script requires a shell more modern than all"
+ $as_echo "$0: the shells that I found on your system."
+ if test x${ZSH_VERSION+set} = xset ; then
+ $as_echo "$0: In particular, zsh $ZSH_VERSION has bugs and should"
+ $as_echo "$0: be upgraded to zsh 4.3.4 or later."
+ else
+ $as_echo "$0: Please tell bug-autoconf@gnu.org and
+$0: lasse.collin@tukaani.org about your system, including
+$0: any error possibly output before this message. Then
+$0: install a modern shell, or manually run the script
+$0: under such a shell if you do have one."
+ fi
+ exit 1
+fi
+fi
+fi
+SHELL=${CONFIG_SHELL-/bin/sh}
+export SHELL
+# Unset more variables known to interfere with behavior of common tools.
+CLICOLOR_FORCE= GREP_OPTIONS=
+unset CLICOLOR_FORCE GREP_OPTIONS
+
+## --------------------- ##
+## M4sh Shell Functions. ##
+## --------------------- ##
+# as_fn_unset VAR
+# ---------------
+# Portably unset VAR.
+as_fn_unset ()
+{
+ { eval $1=; unset $1;}
+}
+as_unset=as_fn_unset
+
+# as_fn_set_status STATUS
+# -----------------------
+# Set $? to STATUS, without forking.
+as_fn_set_status ()
+{
+ return $1
+} # as_fn_set_status
+
+# as_fn_exit STATUS
+# -----------------
+# Exit the shell with STATUS, even in a "trap 0" or "set -e" context.
+as_fn_exit ()
+{
+ set +e
+ as_fn_set_status $1
+ exit $1
+} # as_fn_exit
+
+# as_fn_mkdir_p
+# -------------
+# Create "$as_dir" as a directory, including parents if necessary.
+as_fn_mkdir_p ()
+{
+
+ case $as_dir in #(
+ -*) as_dir=./$as_dir;;
+ esac
+ test -d "$as_dir" || eval $as_mkdir_p || {
+ as_dirs=
+ while :; do
+ case $as_dir in #(
+ *\'*) as_qdir=`$as_echo "$as_dir" | sed "s/'/'\\\\\\\\''/g"`;; #'(
+ *) as_qdir=$as_dir;;
+ esac
+ as_dirs="'$as_qdir' $as_dirs"
+ as_dir=`$as_dirname -- "$as_dir" ||
+$as_expr X"$as_dir" : 'X\(.*[^/]\)//*[^/][^/]*/*$' \| \
+ X"$as_dir" : 'X\(//\)[^/]' \| \
+ X"$as_dir" : 'X\(//\)$' \| \
+ X"$as_dir" : 'X\(/\)' \| . 2>/dev/null ||
+$as_echo X"$as_dir" |
+ sed '/^X\(.*[^/]\)\/\/*[^/][^/]*\/*$/{
+ s//\1/
+ q
+ }
+ /^X\(\/\/\)[^/].*/{
+ s//\1/
+ q
+ }
+ /^X\(\/\/\)$/{
+ s//\1/
+ q
+ }
+ /^X\(\/\).*/{
+ s//\1/
+ q
+ }
+ s/.*/./; q'`
+ test -d "$as_dir" && break
+ done
+ test -z "$as_dirs" || eval "mkdir $as_dirs"
+ } || test -d "$as_dir" || as_fn_error "cannot create directory $as_dir"
+
+
+} # as_fn_mkdir_p
+# as_fn_append VAR VALUE
+# ----------------------
+# Append the text in VALUE to the end of the definition contained in VAR. Take
+# advantage of any shell optimizations that allow amortized linear growth over
+# repeated appends, instead of the typical quadratic growth present in naive
+# implementations.
+if (eval "as_var=1; as_var+=2; test x\$as_var = x12") 2>/dev/null; then :
+ eval 'as_fn_append ()
+ {
+ eval $1+=\$2
+ }'
+else
+ as_fn_append ()
+ {
+ eval $1=\$$1\$2
+ }
+fi # as_fn_append
+
+# as_fn_arith ARG...
+# ------------------
+# Perform arithmetic evaluation on the ARGs, and store the result in the
+# global $as_val. Take advantage of shells that can avoid forks. The arguments
+# must be portable across $(()) and expr.
+if (eval "test \$(( 1 + 1 )) = 2") 2>/dev/null; then :
+ eval 'as_fn_arith ()
+ {
+ as_val=$(( $* ))
+ }'
+else
+ as_fn_arith ()
+ {
+ as_val=`expr "$@" || test $? -eq 1`
+ }
+fi # as_fn_arith
+
+
+# as_fn_error ERROR [LINENO LOG_FD]
+# ---------------------------------
+# Output "`basename $0`: error: ERROR" to stderr. If LINENO and LOG_FD are
+# provided, also output the error to LOG_FD, referencing LINENO. Then exit the
+# script with status $?, using 1 if that was 0.
+as_fn_error ()
+{
+ as_status=$?; test $as_status -eq 0 && as_status=1
+ if test "$3"; then
+ as_lineno=${as_lineno-"$2"} as_lineno_stack=as_lineno_stack=$as_lineno_stack
+ $as_echo "$as_me:${as_lineno-$LINENO}: error: $1" >&$3
+ fi
+ $as_echo "$as_me: error: $1" >&2
+ as_fn_exit $as_status
+} # as_fn_error
+
+if expr a : '\(a\)' >/dev/null 2>&1 &&
+ test "X`expr 00001 : '.*\(...\)'`" = X001; then
+ as_expr=expr
+else
+ as_expr=false
+fi
+
+if (basename -- /) >/dev/null 2>&1 && test "X`basename -- / 2>&1`" = "X/"; then
+ as_basename=basename
+else
+ as_basename=false
+fi
+
+if (as_dir=`dirname -- /` && test "X$as_dir" = X/) >/dev/null 2>&1; then
+ as_dirname=dirname
+else
+ as_dirname=false
+fi
+
+as_me=`$as_basename -- "$0" ||
+$as_expr X/"$0" : '.*/\([^/][^/]*\)/*$' \| \
+ X"$0" : 'X\(//\)$' \| \
+ X"$0" : 'X\(/\)' \| . 2>/dev/null ||
+$as_echo X/"$0" |
+ sed '/^.*\/\([^/][^/]*\)\/*$/{
+ s//\1/
+ q
+ }
+ /^X\/\(\/\/\)$/{
+ s//\1/
+ q
+ }
+ /^X\/\(\/\).*/{
+ s//\1/
+ q
+ }
+ s/.*/./; q'`
+
+# Avoid depending upon Character Ranges.
+as_cr_letters='abcdefghijklmnopqrstuvwxyz'
+as_cr_LETTERS='ABCDEFGHIJKLMNOPQRSTUVWXYZ'
+as_cr_Letters=$as_cr_letters$as_cr_LETTERS
+as_cr_digits='0123456789'
+as_cr_alnum=$as_cr_Letters$as_cr_digits
+
+
+ as_lineno_1=$LINENO as_lineno_1a=$LINENO
+ as_lineno_2=$LINENO as_lineno_2a=$LINENO
+ eval 'test "x$as_lineno_1'$as_run'" != "x$as_lineno_2'$as_run'" &&
+ test "x`expr $as_lineno_1'$as_run' + 1`" = "x$as_lineno_2'$as_run'"' || {
+ # Blame Lee E. McMahon (1931-1989) for sed's syntax. :-)
+ sed -n '
+ p
+ /[$]LINENO/=
+ ' <$as_myself |
+ sed '
+ s/[$]LINENO.*/&-/
+ t lineno
+ b
+ :lineno
+ N
+ :loop
+ s/[$]LINENO\([^'$as_cr_alnum'_].*\n\)\(.*\)/\2\1\2/
+ t loop
+ s/-\n.*//
+ ' >$as_me.lineno &&
+ chmod +x "$as_me.lineno" ||
+ { $as_echo "$as_me: error: cannot create $as_me.lineno; rerun with a POSIX shell" >&2; as_fn_exit 1; }
+
+ # Don't try to exec as it changes $[0], causing all sort of problems
+ # (the dirname of $[0] is not the place where we might find the
+ # original and so on. Autoconf is especially sensitive to this).
+ . "./$as_me.lineno"
+ # Exit status is that of the last command.
+ exit
+}
+
+ECHO_C= ECHO_N= ECHO_T=
+case `echo -n x` in #(((((
+-n*)
+ case `echo 'xy\c'` in
+ *c*) ECHO_T=' ';; # ECHO_T is single tab character.
+ xy) ECHO_C='\c';;
+ *) echo `echo ksh88 bug on AIX 6.1` > /dev/null
+ ECHO_T=' ';;
+ esac;;
+*)
+ ECHO_N='-n';;
+esac
+
+rm -f conf$$ conf$$.exe conf$$.file
+if test -d conf$$.dir; then
+ rm -f conf$$.dir/conf$$.file
+else
+ rm -f conf$$.dir
+ mkdir conf$$.dir 2>/dev/null
+fi
+if (echo >conf$$.file) 2>/dev/null; then
+ if ln -s conf$$.file conf$$ 2>/dev/null; then
+ as_ln_s='ln -s'
+ # ... but there are two gotchas:
+ # 1) On MSYS, both `ln -s file dir' and `ln file dir' fail.
+ # 2) DJGPP < 2.04 has no symlinks; `ln -s' creates a wrapper executable.
+ # In both cases, we have to default to `cp -p'.
+ ln -s conf$$.file conf$$.dir 2>/dev/null && test ! -f conf$$.exe ||
+ as_ln_s='cp -p'
+ elif ln conf$$.file conf$$ 2>/dev/null; then
+ as_ln_s=ln
+ else
+ as_ln_s='cp -p'
+ fi
+else
+ as_ln_s='cp -p'
+fi
+rm -f conf$$ conf$$.exe conf$$.dir/conf$$.file conf$$.file
+rmdir conf$$.dir 2>/dev/null
+
+if mkdir -p . 2>/dev/null; then
+ as_mkdir_p='mkdir -p "$as_dir"'
+else
+ test -d ./-p && rmdir ./-p
+ as_mkdir_p=false
+fi
+
+if test -x / >/dev/null 2>&1; then
+ as_test_x='test -x'
+else
+ if ls -dL / >/dev/null 2>&1; then
+ as_ls_L_option=L
+ else
+ as_ls_L_option=
+ fi
+ as_test_x='
+ eval sh -c '\''
+ if test -d "$1"; then
+ test -d "$1/.";
+ else
+ case $1 in #(
+ -*)set "./$1";;
+ esac;
+ case `ls -ld'$as_ls_L_option' "$1" 2>/dev/null` in #((
+ ???[sx]*):;;*)false;;esac;fi
+ '\'' sh
+ '
+fi
+as_executable_p=$as_test_x
+
+# Sed expression to map a string onto a valid CPP name.
+as_tr_cpp="eval sed 'y%*$as_cr_letters%P$as_cr_LETTERS%;s%[^_$as_cr_alnum]%_%g'"
+
+# Sed expression to map a string onto a valid variable name.
+as_tr_sh="eval sed 'y%*+%pp%;s%[^_$as_cr_alnum]%_%g'"
+
+
+
+# Check that we are running under the correct shell.
+SHELL=${CONFIG_SHELL-/bin/sh}
+
+case X$lt_ECHO in
+X*--fallback-echo)
+ # Remove one level of quotation (which was required for Make).
+ ECHO=`echo "$lt_ECHO" | sed 's,\\\\\$\\$0,'$0','`
+ ;;
+esac
+
+ECHO=${lt_ECHO-echo}
+if test "X$1" = X--no-reexec; then
+ # Discard the --no-reexec flag, and continue.
+ shift
+elif test "X$1" = X--fallback-echo; then
+ # Avoid inline document here, it may be left over
+ :
+elif test "X`{ $ECHO '\t'; } 2>/dev/null`" = 'X\t' ; then
+ # Yippee, $ECHO works!
+ :
+else
+ # Restart under the correct shell.
+ exec $SHELL "$0" --no-reexec ${1+"$@"}
+fi
+
+if test "X$1" = X--fallback-echo; then
+ # used as fallback echo
+ shift
+ cat <<_LT_EOF
+$*
+_LT_EOF
+ exit 0
+fi
+
+# The HP-UX ksh and POSIX shell print the target directory to stdout
+# if CDPATH is set.
+(unset CDPATH) >/dev/null 2>&1 && unset CDPATH
+
+if test -z "$lt_ECHO"; then
+ if test "X${echo_test_string+set}" != Xset; then
+ # find a string as large as possible, as long as the shell can cope with it
+ for cmd in 'sed 50q "$0"' 'sed 20q "$0"' 'sed 10q "$0"' 'sed 2q "$0"' 'echo test'; do
+ # expected sizes: less than 2Kb, 1Kb, 512 bytes, 16 bytes, ...
+ if { echo_test_string=`eval $cmd`; } 2>/dev/null &&
+ { test "X$echo_test_string" = "X$echo_test_string"; } 2>/dev/null
+ then
+ break
+ fi
+ done
+ fi
+
+ if test "X`{ $ECHO '\t'; } 2>/dev/null`" = 'X\t' &&
+ echo_testing_string=`{ $ECHO "$echo_test_string"; } 2>/dev/null` &&
+ test "X$echo_testing_string" = "X$echo_test_string"; then
+ :
+ else
+ # The Solaris, AIX, and Digital Unix default echo programs unquote
+ # backslashes. This makes it impossible to quote backslashes using
+ # echo "$something" | sed 's/\\/\\\\/g'
+ #
+ # So, first we look for a working echo in the user's PATH.
+
+ lt_save_ifs="$IFS"; IFS=$PATH_SEPARATOR
+ for dir in $PATH /usr/ucb; do
+ IFS="$lt_save_ifs"
+ if (test -f $dir/echo || test -f $dir/echo$ac_exeext) &&
+ test "X`($dir/echo '\t') 2>/dev/null`" = 'X\t' &&
+ echo_testing_string=`($dir/echo "$echo_test_string") 2>/dev/null` &&
+ test "X$echo_testing_string" = "X$echo_test_string"; then
+ ECHO="$dir/echo"
+ break
+ fi
+ done
+ IFS="$lt_save_ifs"
+
+ if test "X$ECHO" = Xecho; then
+ # We didn't find a better echo, so look for alternatives.
+ if test "X`{ print -r '\t'; } 2>/dev/null`" = 'X\t' &&
+ echo_testing_string=`{ print -r "$echo_test_string"; } 2>/dev/null` &&
+ test "X$echo_testing_string" = "X$echo_test_string"; then
+ # This shell has a builtin print -r that does the trick.
+ ECHO='print -r'
+ elif { test -f /bin/ksh || test -f /bin/ksh$ac_exeext; } &&
+ test "X$CONFIG_SHELL" != X/bin/ksh; then
+ # If we have ksh, try running configure again with it.
+ ORIGINAL_CONFIG_SHELL=${CONFIG_SHELL-/bin/sh}
+ export ORIGINAL_CONFIG_SHELL
+ CONFIG_SHELL=/bin/ksh
+ export CONFIG_SHELL
+ exec $CONFIG_SHELL "$0" --no-reexec ${1+"$@"}
+ else
+ # Try using printf.
+ ECHO='printf %s\n'
+ if test "X`{ $ECHO '\t'; } 2>/dev/null`" = 'X\t' &&
+ echo_testing_string=`{ $ECHO "$echo_test_string"; } 2>/dev/null` &&
+ test "X$echo_testing_string" = "X$echo_test_string"; then
+ # Cool, printf works
+ :
+ elif echo_testing_string=`($ORIGINAL_CONFIG_SHELL "$0" --fallback-echo '\t') 2>/dev/null` &&
+ test "X$echo_testing_string" = 'X\t' &&
+ echo_testing_string=`($ORIGINAL_CONFIG_SHELL "$0" --fallback-echo "$echo_test_string") 2>/dev/null` &&
+ test "X$echo_testing_string" = "X$echo_test_string"; then
+ CONFIG_SHELL=$ORIGINAL_CONFIG_SHELL
+ export CONFIG_SHELL
+ SHELL="$CONFIG_SHELL"
+ export SHELL
+ ECHO="$CONFIG_SHELL $0 --fallback-echo"
+ elif echo_testing_string=`($CONFIG_SHELL "$0" --fallback-echo '\t') 2>/dev/null` &&
+ test "X$echo_testing_string" = 'X\t' &&
+ echo_testing_string=`($CONFIG_SHELL "$0" --fallback-echo "$echo_test_string") 2>/dev/null` &&
+ test "X$echo_testing_string" = "X$echo_test_string"; then
+ ECHO="$CONFIG_SHELL $0 --fallback-echo"
+ else
+ # maybe with a smaller string...
+ prev=:
+
+ for cmd in 'echo test' 'sed 2q "$0"' 'sed 10q "$0"' 'sed 20q "$0"' 'sed 50q "$0"'; do
+ if { test "X$echo_test_string" = "X`eval $cmd`"; } 2>/dev/null
+ then
+ break
+ fi
+ prev="$cmd"
+ done
+
+ if test "$prev" != 'sed 50q "$0"'; then
+ echo_test_string=`eval $prev`
+ export echo_test_string
+ exec ${ORIGINAL_CONFIG_SHELL-${CONFIG_SHELL-/bin/sh}} "$0" ${1+"$@"}
+ else
+ # Oops. We lost completely, so just stick with echo.
+ ECHO=echo
+ fi
+ fi
+ fi
+ fi
+ fi
+fi
+
+# Copy echo and quote the copy suitably for passing to libtool from
+# the Makefile, instead of quoting the original, which is used later.
+lt_ECHO=$ECHO
+if test "X$lt_ECHO" = "X$CONFIG_SHELL $0 --fallback-echo"; then
+ lt_ECHO="$CONFIG_SHELL \\\$\$0 --fallback-echo"
+fi
+
+
+
+
+exec 7<&0 </dev/null 6>&1
+
+# Name of the host.
+# hostname on some systems (SVR3.2, Linux) returns a bogus exit status,
+# so uname gets run too.
+ac_hostname=`(hostname || uname -n) 2>/dev/null | sed 1q`
+
+#
+# Initializations.
+#
+ac_default_prefix=/usr/local
+ac_clean_files=
+ac_config_libobj_dir=.
+LIBOBJS=
+cross_compiling=no
+subdirs=
+MFLAGS=
+MAKEFLAGS=
+
+# Identity of this package.
+PACKAGE_NAME='XZ Utils'
+PACKAGE_TARNAME='xz'
+PACKAGE_VERSION='4.999.9beta'
+PACKAGE_STRING='XZ Utils 4.999.9beta'
+PACKAGE_BUGREPORT='lasse.collin@tukaani.org'
+PACKAGE_URL=''
+
+ac_unique_file="src/liblzma/common/common.h"
+# Factoring default headers for most tests.
+ac_includes_default="\
+#include <stdio.h>
+#ifdef HAVE_SYS_TYPES_H
+# include <sys/types.h>
+#endif
+#ifdef HAVE_SYS_STAT_H
+# include <sys/stat.h>
+#endif
+#ifdef STDC_HEADERS
+# include <stdlib.h>
+# include <stddef.h>
+#else
+# ifdef HAVE_STDLIB_H
+# include <stdlib.h>
+# endif
+#endif
+#ifdef HAVE_STRING_H
+# if !defined STDC_HEADERS && defined HAVE_MEMORY_H
+# include <memory.h>
+# endif
+# include <string.h>
+#endif
+#ifdef HAVE_STRINGS_H
+# include <strings.h>
+#endif
+#ifdef HAVE_INTTYPES_H
+# include <inttypes.h>
+#endif
+#ifdef HAVE_STDINT_H
+# include <stdint.h>
+#endif
+#ifdef HAVE_UNISTD_H
+# include <unistd.h>
+#endif"
+
+gt_needs=
+ac_subst_vars='am__EXEEXT_FALSE
+am__EXEEXT_TRUE
+LTLIBOBJS
+xz
+DYNAMIC_LDFLAGS
+DYNAMIC_CPPFLAGS
+STATIC_LDFLAGS
+STATIC_CPPFLAGS
+AM_CFLAGS
+COND_GNULIB_FALSE
+COND_GNULIB_TRUE
+HAVE_VISIBILITY
+CFLAG_VISIBILITY
+GETOPT_H
+LIBOBJS
+POSUB
+LTLIBINTL
+LIBINTL
+INTLLIBS
+LTLIBICONV
+LIBICONV
+INTL_MACOSX_LIBS
+MSGMERGE
+XGETTEXT_015
+XGETTEXT
+GMSGFMT_015
+MSGFMT_015
+GMSGFMT
+MSGFMT
+USE_NLS
+COND_SHARED_FALSE
+COND_SHARED_TRUE
+RC
+OTOOL64
+OTOOL
+LIPO
+NMEDIT
+DSYMUTIL
+lt_ECHO
+RANLIB
+AR
+NM
+ac_ct_DUMPBIN
+DUMPBIN
+LD
+FGREP
+SED
+LIBTOOL
+OBJDUMP
+DLLTOOL
+AS
+PTHREAD_CFLAGS
+PTHREAD_LIBS
+PTHREAD_CC
+acx_pthread_config
+EGREP
+GREP
+CPP
+am__fastdepCCAS_FALSE
+am__fastdepCCAS_TRUE
+CCASDEPMODE
+CCASFLAGS
+CCAS
+am__fastdepCC_FALSE
+am__fastdepCC_TRUE
+CCDEPMODE
+AMDEPBACKSLASH
+AMDEP_FALSE
+AMDEP_TRUE
+am__quote
+am__include
+DEPDIR
+OBJEXT
+EXEEXT
+ac_ct_CC
+CPPFLAGS
+LDFLAGS
+CFLAGS
+CC
+LN_S
+am__untar
+am__tar
+AMTAR
+am__leading_dot
+SET_MAKE
+AWK
+mkdir_p
+MKDIR_P
+INSTALL_STRIP_PROGRAM
+STRIP
+install_sh
+MAKEINFO
+AUTOHEADER
+AUTOMAKE
+AUTOCONF
+ACLOCAL
+VERSION
+PACKAGE
+CYGPATH_W
+am__isrc
+INSTALL_DATA
+INSTALL_SCRIPT
+INSTALL_PROGRAM
+PREFERABLY_POSIX_SHELL
+POSIX_SHELL
+COND_SMALL_FALSE
+COND_SMALL_TRUE
+COND_ASM_X86_64_FALSE
+COND_ASM_X86_64_TRUE
+COND_ASM_X86_FALSE
+COND_ASM_X86_TRUE
+COND_CHECK_SHA256_FALSE
+COND_CHECK_SHA256_TRUE
+COND_CHECK_CRC64_FALSE
+COND_CHECK_CRC64_TRUE
+COND_CHECK_CRC32_FALSE
+COND_CHECK_CRC32_TRUE
+COND_DECODER_LZ_FALSE
+COND_DECODER_LZ_TRUE
+COND_ENCODER_LZ_FALSE
+COND_ENCODER_LZ_TRUE
+COND_FILTER_LZ_FALSE
+COND_FILTER_LZ_TRUE
+COND_DECODER_SIMPLE_FALSE
+COND_DECODER_SIMPLE_TRUE
+COND_ENCODER_SIMPLE_FALSE
+COND_ENCODER_SIMPLE_TRUE
+COND_FILTER_SIMPLE_FALSE
+COND_FILTER_SIMPLE_TRUE
+COND_DECODER_SPARC_FALSE
+COND_DECODER_SPARC_TRUE
+COND_ENCODER_SPARC_FALSE
+COND_ENCODER_SPARC_TRUE
+COND_FILTER_SPARC_FALSE
+COND_FILTER_SPARC_TRUE
+COND_DECODER_ARMTHUMB_FALSE
+COND_DECODER_ARMTHUMB_TRUE
+COND_ENCODER_ARMTHUMB_FALSE
+COND_ENCODER_ARMTHUMB_TRUE
+COND_FILTER_ARMTHUMB_FALSE
+COND_FILTER_ARMTHUMB_TRUE
+COND_DECODER_ARM_FALSE
+COND_DECODER_ARM_TRUE
+COND_ENCODER_ARM_FALSE
+COND_ENCODER_ARM_TRUE
+COND_FILTER_ARM_FALSE
+COND_FILTER_ARM_TRUE
+COND_DECODER_IA64_FALSE
+COND_DECODER_IA64_TRUE
+COND_ENCODER_IA64_FALSE
+COND_ENCODER_IA64_TRUE
+COND_FILTER_IA64_FALSE
+COND_FILTER_IA64_TRUE
+COND_DECODER_POWERPC_FALSE
+COND_DECODER_POWERPC_TRUE
+COND_ENCODER_POWERPC_FALSE
+COND_ENCODER_POWERPC_TRUE
+COND_FILTER_POWERPC_FALSE
+COND_FILTER_POWERPC_TRUE
+COND_DECODER_X86_FALSE
+COND_DECODER_X86_TRUE
+COND_ENCODER_X86_FALSE
+COND_ENCODER_X86_TRUE
+COND_FILTER_X86_FALSE
+COND_FILTER_X86_TRUE
+COND_DECODER_DELTA_FALSE
+COND_DECODER_DELTA_TRUE
+COND_ENCODER_DELTA_FALSE
+COND_ENCODER_DELTA_TRUE
+COND_FILTER_DELTA_FALSE
+COND_FILTER_DELTA_TRUE
+COND_DECODER_SUBBLOCK_FALSE
+COND_DECODER_SUBBLOCK_TRUE
+COND_ENCODER_SUBBLOCK_FALSE
+COND_ENCODER_SUBBLOCK_TRUE
+COND_FILTER_SUBBLOCK_FALSE
+COND_FILTER_SUBBLOCK_TRUE
+COND_DECODER_LZMA2_FALSE
+COND_DECODER_LZMA2_TRUE
+COND_ENCODER_LZMA2_FALSE
+COND_ENCODER_LZMA2_TRUE
+COND_FILTER_LZMA2_FALSE
+COND_FILTER_LZMA2_TRUE
+COND_DECODER_LZMA1_FALSE
+COND_DECODER_LZMA1_TRUE
+COND_ENCODER_LZMA1_FALSE
+COND_ENCODER_LZMA1_TRUE
+COND_FILTER_LZMA1_FALSE
+COND_FILTER_LZMA1_TRUE
+COND_MAIN_DECODER_FALSE
+COND_MAIN_DECODER_TRUE
+COND_MAIN_ENCODER_FALSE
+COND_MAIN_ENCODER_TRUE
+COND_W32_FALSE
+COND_W32_TRUE
+host_os
+host_vendor
+host_cpu
+host
+build_os
+build_vendor
+build_cpu
+build
+PACKAGE_HOMEPAGE
+target_alias
+host_alias
+build_alias
+LIBS
+ECHO_T
+ECHO_N
+ECHO_C
+DEFS
+mandir
+localedir
+libdir
+psdir
+pdfdir
+dvidir
+htmldir
+infodir
+docdir
+oldincludedir
+includedir
+localstatedir
+sharedstatedir
+sysconfdir
+datadir
+datarootdir
+libexecdir
+sbindir
+bindir
+program_transform_name
+prefix
+exec_prefix
+PACKAGE_URL
+PACKAGE_BUGREPORT
+PACKAGE_STRING
+PACKAGE_VERSION
+PACKAGE_TARNAME
+PACKAGE_NAME
+PATH_SEPARATOR
+SHELL'
+ac_subst_files=''
+ac_user_opts='
+enable_option_checking
+enable_debug
+enable_encoders
+enable_decoders
+enable_match_finders
+enable_checks
+enable_assembler
+enable_unaligned_access
+enable_small
+enable_threads
+enable_dynamic
+enable_dependency_tracking
+enable_shared
+enable_static
+with_pic
+enable_fast_install
+with_gnu_ld
+enable_libtool_lock
+enable_nls
+enable_rpath
+with_libiconv_prefix
+with_libintl_prefix
+enable_largefile
+enable_werror
+'
+ ac_precious_vars='build_alias
+host_alias
+target_alias
+CC
+CFLAGS
+LDFLAGS
+LIBS
+CPPFLAGS
+CCAS
+CCASFLAGS
+CPP'
+
+
+# Initialize some variables set by options.
+ac_init_help=
+ac_init_version=false
+ac_unrecognized_opts=
+ac_unrecognized_sep=
+# The variables have the same names as the options, with
+# dashes changed to underlines.
+cache_file=/dev/null
+exec_prefix=NONE
+no_create=
+no_recursion=
+prefix=NONE
+program_prefix=NONE
+program_suffix=NONE
+program_transform_name=s,x,x,
+silent=
+site=
+srcdir=
+verbose=
+x_includes=NONE
+x_libraries=NONE
+
+# Installation directory options.
+# These are left unexpanded so users can "make install exec_prefix=/foo"
+# and all the variables that are supposed to be based on exec_prefix
+# by default will actually change.
+# Use braces instead of parens because sh, perl, etc. also accept them.
+# (The list follows the same order as the GNU Coding Standards.)
+bindir='${exec_prefix}/bin'
+sbindir='${exec_prefix}/sbin'
+libexecdir='${exec_prefix}/libexec'
+datarootdir='${prefix}/share'
+datadir='${datarootdir}'
+sysconfdir='${prefix}/etc'
+sharedstatedir='${prefix}/com'
+localstatedir='${prefix}/var'
+includedir='${prefix}/include'
+oldincludedir='/usr/include'
+docdir='${datarootdir}/doc/${PACKAGE_TARNAME}'
+infodir='${datarootdir}/info'
+htmldir='${docdir}'
+dvidir='${docdir}'
+pdfdir='${docdir}'
+psdir='${docdir}'
+libdir='${exec_prefix}/lib'
+localedir='${datarootdir}/locale'
+mandir='${datarootdir}/man'
+
+ac_prev=
+ac_dashdash=
+for ac_option
+do
+ # If the previous option needs an argument, assign it.
+ if test -n "$ac_prev"; then
+ eval $ac_prev=\$ac_option
+ ac_prev=
+ continue
+ fi
+
+ case $ac_option in
+ *=*) ac_optarg=`expr "X$ac_option" : '[^=]*=\(.*\)'` ;;
+ *) ac_optarg=yes ;;
+ esac
+
+ # Accept the important Cygnus configure options, so we can diagnose typos.
+
+ case $ac_dashdash$ac_option in
+ --)
+ ac_dashdash=yes ;;
+
+ -bindir | --bindir | --bindi | --bind | --bin | --bi)
+ ac_prev=bindir ;;
+ -bindir=* | --bindir=* | --bindi=* | --bind=* | --bin=* | --bi=*)
+ bindir=$ac_optarg ;;
+
+ -build | --build | --buil | --bui | --bu)
+ ac_prev=build_alias ;;
+ -build=* | --build=* | --buil=* | --bui=* | --bu=*)
+ build_alias=$ac_optarg ;;
+
+ -cache-file | --cache-file | --cache-fil | --cache-fi \
+ | --cache-f | --cache- | --cache | --cach | --cac | --ca | --c)
+ ac_prev=cache_file ;;
+ -cache-file=* | --cache-file=* | --cache-fil=* | --cache-fi=* \
+ | --cache-f=* | --cache-=* | --cache=* | --cach=* | --cac=* | --ca=* | --c=*)
+ cache_file=$ac_optarg ;;
+
+ --config-cache | -C)
+ cache_file=config.cache ;;
+
+ -datadir | --datadir | --datadi | --datad)
+ ac_prev=datadir ;;
+ -datadir=* | --datadir=* | --datadi=* | --datad=*)
+ datadir=$ac_optarg ;;
+
+ -datarootdir | --datarootdir | --datarootdi | --datarootd | --dataroot \
+ | --dataroo | --dataro | --datar)
+ ac_prev=datarootdir ;;
+ -datarootdir=* | --datarootdir=* | --datarootdi=* | --datarootd=* \
+ | --dataroot=* | --dataroo=* | --dataro=* | --datar=*)
+ datarootdir=$ac_optarg ;;
+
+ -disable-* | --disable-*)
+ ac_useropt=`expr "x$ac_option" : 'x-*disable-\(.*\)'`
+ # Reject names that are not valid shell variable names.
+ expr "x$ac_useropt" : ".*[^-+._$as_cr_alnum]" >/dev/null &&
+ as_fn_error "invalid feature name: $ac_useropt"
+ ac_useropt_orig=$ac_useropt
+ ac_useropt=`$as_echo "$ac_useropt" | sed 's/[-+.]/_/g'`
+ case $ac_user_opts in
+ *"
+"enable_$ac_useropt"
+"*) ;;
+ *) ac_unrecognized_opts="$ac_unrecognized_opts$ac_unrecognized_sep--disable-$ac_useropt_orig"
+ ac_unrecognized_sep=', ';;
+ esac
+ eval enable_$ac_useropt=no ;;
+
+ -docdir | --docdir | --docdi | --doc | --do)
+ ac_prev=docdir ;;
+ -docdir=* | --docdir=* | --docdi=* | --doc=* | --do=*)
+ docdir=$ac_optarg ;;
+
+ -dvidir | --dvidir | --dvidi | --dvid | --dvi | --dv)
+ ac_prev=dvidir ;;
+ -dvidir=* | --dvidir=* | --dvidi=* | --dvid=* | --dvi=* | --dv=*)
+ dvidir=$ac_optarg ;;
+
+ -enable-* | --enable-*)
+ ac_useropt=`expr "x$ac_option" : 'x-*enable-\([^=]*\)'`
+ # Reject names that are not valid shell variable names.
+ expr "x$ac_useropt" : ".*[^-+._$as_cr_alnum]" >/dev/null &&
+ as_fn_error "invalid feature name: $ac_useropt"
+ ac_useropt_orig=$ac_useropt
+ ac_useropt=`$as_echo "$ac_useropt" | sed 's/[-+.]/_/g'`
+ case $ac_user_opts in
+ *"
+"enable_$ac_useropt"
+"*) ;;
+ *) ac_unrecognized_opts="$ac_unrecognized_opts$ac_unrecognized_sep--enable-$ac_useropt_orig"
+ ac_unrecognized_sep=', ';;
+ esac
+ eval enable_$ac_useropt=\$ac_optarg ;;
+
+ -exec-prefix | --exec_prefix | --exec-prefix | --exec-prefi \
+ | --exec-pref | --exec-pre | --exec-pr | --exec-p | --exec- \
+ | --exec | --exe | --ex)
+ ac_prev=exec_prefix ;;
+ -exec-prefix=* | --exec_prefix=* | --exec-prefix=* | --exec-prefi=* \
+ | --exec-pref=* | --exec-pre=* | --exec-pr=* | --exec-p=* | --exec-=* \
+ | --exec=* | --exe=* | --ex=*)
+ exec_prefix=$ac_optarg ;;
+
+ -gas | --gas | --ga | --g)
+ # Obsolete; use --with-gas.
+ with_gas=yes ;;
+
+ -help | --help | --hel | --he | -h)
+ ac_init_help=long ;;
+ -help=r* | --help=r* | --hel=r* | --he=r* | -hr*)
+ ac_init_help=recursive ;;
+ -help=s* | --help=s* | --hel=s* | --he=s* | -hs*)
+ ac_init_help=short ;;
+
+ -host | --host | --hos | --ho)
+ ac_prev=host_alias ;;
+ -host=* | --host=* | --hos=* | --ho=*)
+ host_alias=$ac_optarg ;;
+
+ -htmldir | --htmldir | --htmldi | --htmld | --html | --htm | --ht)
+ ac_prev=htmldir ;;
+ -htmldir=* | --htmldir=* | --htmldi=* | --htmld=* | --html=* | --htm=* \
+ | --ht=*)
+ htmldir=$ac_optarg ;;
+
+ -includedir | --includedir | --includedi | --included | --include \
+ | --includ | --inclu | --incl | --inc)
+ ac_prev=includedir ;;
+ -includedir=* | --includedir=* | --includedi=* | --included=* | --include=* \
+ | --includ=* | --inclu=* | --incl=* | --inc=*)
+ includedir=$ac_optarg ;;
+
+ -infodir | --infodir | --infodi | --infod | --info | --inf)
+ ac_prev=infodir ;;
+ -infodir=* | --infodir=* | --infodi=* | --infod=* | --info=* | --inf=*)
+ infodir=$ac_optarg ;;
+
+ -libdir | --libdir | --libdi | --libd)
+ ac_prev=libdir ;;
+ -libdir=* | --libdir=* | --libdi=* | --libd=*)
+ libdir=$ac_optarg ;;
+
+ -libexecdir | --libexecdir | --libexecdi | --libexecd | --libexec \
+ | --libexe | --libex | --libe)
+ ac_prev=libexecdir ;;
+ -libexecdir=* | --libexecdir=* | --libexecdi=* | --libexecd=* | --libexec=* \
+ | --libexe=* | --libex=* | --libe=*)
+ libexecdir=$ac_optarg ;;
+
+ -localedir | --localedir | --localedi | --localed | --locale)
+ ac_prev=localedir ;;
+ -localedir=* | --localedir=* | --localedi=* | --localed=* | --locale=*)
+ localedir=$ac_optarg ;;
+
+ -localstatedir | --localstatedir | --localstatedi | --localstated \
+ | --localstate | --localstat | --localsta | --localst | --locals)
+ ac_prev=localstatedir ;;
+ -localstatedir=* | --localstatedir=* | --localstatedi=* | --localstated=* \
+ | --localstate=* | --localstat=* | --localsta=* | --localst=* | --locals=*)
+ localstatedir=$ac_optarg ;;
+
+ -mandir | --mandir | --mandi | --mand | --man | --ma | --m)
+ ac_prev=mandir ;;
+ -mandir=* | --mandir=* | --mandi=* | --mand=* | --man=* | --ma=* | --m=*)
+ mandir=$ac_optarg ;;
+
+ -nfp | --nfp | --nf)
+ # Obsolete; use --without-fp.
+ with_fp=no ;;
+
+ -no-create | --no-create | --no-creat | --no-crea | --no-cre \
+ | --no-cr | --no-c | -n)
+ no_create=yes ;;
+
+ -no-recursion | --no-recursion | --no-recursio | --no-recursi \
+ | --no-recurs | --no-recur | --no-recu | --no-rec | --no-re | --no-r)
+ no_recursion=yes ;;
+
+ -oldincludedir | --oldincludedir | --oldincludedi | --oldincluded \
+ | --oldinclude | --oldinclud | --oldinclu | --oldincl | --oldinc \
+ | --oldin | --oldi | --old | --ol | --o)
+ ac_prev=oldincludedir ;;
+ -oldincludedir=* | --oldincludedir=* | --oldincludedi=* | --oldincluded=* \
+ | --oldinclude=* | --oldinclud=* | --oldinclu=* | --oldincl=* | --oldinc=* \
+ | --oldin=* | --oldi=* | --old=* | --ol=* | --o=*)
+ oldincludedir=$ac_optarg ;;
+
+ -prefix | --prefix | --prefi | --pref | --pre | --pr | --p)
+ ac_prev=prefix ;;
+ -prefix=* | --prefix=* | --prefi=* | --pref=* | --pre=* | --pr=* | --p=*)
+ prefix=$ac_optarg ;;
+
+ -program-prefix | --program-prefix | --program-prefi | --program-pref \
+ | --program-pre | --program-pr | --program-p)
+ ac_prev=program_prefix ;;
+ -program-prefix=* | --program-prefix=* | --program-prefi=* \
+ | --program-pref=* | --program-pre=* | --program-pr=* | --program-p=*)
+ program_prefix=$ac_optarg ;;
+
+ -program-suffix | --program-suffix | --program-suffi | --program-suff \
+ | --program-suf | --program-su | --program-s)
+ ac_prev=program_suffix ;;
+ -program-suffix=* | --program-suffix=* | --program-suffi=* \
+ | --program-suff=* | --program-suf=* | --program-su=* | --program-s=*)
+ program_suffix=$ac_optarg ;;
+
+ -program-transform-name | --program-transform-name \
+ | --program-transform-nam | --program-transform-na \
+ | --program-transform-n | --program-transform- \
+ | --program-transform | --program-transfor \
+ | --program-transfo | --program-transf \
+ | --program-trans | --program-tran \
+ | --progr-tra | --program-tr | --program-t)
+ ac_prev=program_transform_name ;;
+ -program-transform-name=* | --program-transform-name=* \
+ | --program-transform-nam=* | --program-transform-na=* \
+ | --program-transform-n=* | --program-transform-=* \
+ | --program-transform=* | --program-transfor=* \
+ | --program-transfo=* | --program-transf=* \
+ | --program-trans=* | --program-tran=* \
+ | --progr-tra=* | --program-tr=* | --program-t=*)
+ program_transform_name=$ac_optarg ;;
+
+ -pdfdir | --pdfdir | --pdfdi | --pdfd | --pdf | --pd)
+ ac_prev=pdfdir ;;
+ -pdfdir=* | --pdfdir=* | --pdfdi=* | --pdfd=* | --pdf=* | --pd=*)
+ pdfdir=$ac_optarg ;;
+
+ -psdir | --psdir | --psdi | --psd | --ps)
+ ac_prev=psdir ;;
+ -psdir=* | --psdir=* | --psdi=* | --psd=* | --ps=*)
+ psdir=$ac_optarg ;;
+
+ -q | -quiet | --quiet | --quie | --qui | --qu | --q \
+ | -silent | --silent | --silen | --sile | --sil)
+ silent=yes ;;
+
+ -sbindir | --sbindir | --sbindi | --sbind | --sbin | --sbi | --sb)
+ ac_prev=sbindir ;;
+ -sbindir=* | --sbindir=* | --sbindi=* | --sbind=* | --sbin=* \
+ | --sbi=* | --sb=*)
+ sbindir=$ac_optarg ;;
+
+ -sharedstatedir | --sharedstatedir | --sharedstatedi \
+ | --sharedstated | --sharedstate | --sharedstat | --sharedsta \
+ | --sharedst | --shareds | --shared | --share | --shar \
+ | --sha | --sh)
+ ac_prev=sharedstatedir ;;
+ -sharedstatedir=* | --sharedstatedir=* | --sharedstatedi=* \
+ | --sharedstated=* | --sharedstate=* | --sharedstat=* | --sharedsta=* \
+ | --sharedst=* | --shareds=* | --shared=* | --share=* | --shar=* \
+ | --sha=* | --sh=*)
+ sharedstatedir=$ac_optarg ;;
+
+ -site | --site | --sit)
+ ac_prev=site ;;
+ -site=* | --site=* | --sit=*)
+ site=$ac_optarg ;;
+
+ -srcdir | --srcdir | --srcdi | --srcd | --src | --sr)
+ ac_prev=srcdir ;;
+ -srcdir=* | --srcdir=* | --srcdi=* | --srcd=* | --src=* | --sr=*)
+ srcdir=$ac_optarg ;;
+
+ -sysconfdir | --sysconfdir | --sysconfdi | --sysconfd | --sysconf \
+ | --syscon | --sysco | --sysc | --sys | --sy)
+ ac_prev=sysconfdir ;;
+ -sysconfdir=* | --sysconfdir=* | --sysconfdi=* | --sysconfd=* | --sysconf=* \
+ | --syscon=* | --sysco=* | --sysc=* | --sys=* | --sy=*)
+ sysconfdir=$ac_optarg ;;
+
+ -target | --target | --targe | --targ | --tar | --ta | --t)
+ ac_prev=target_alias ;;
+ -target=* | --target=* | --targe=* | --targ=* | --tar=* | --ta=* | --t=*)
+ target_alias=$ac_optarg ;;
+
+ -v | -verbose | --verbose | --verbos | --verbo | --verb)
+ verbose=yes ;;
+
+ -version | --version | --versio | --versi | --vers | -V)
+ ac_init_version=: ;;
+
+ -with-* | --with-*)
+ ac_useropt=`expr "x$ac_option" : 'x-*with-\([^=]*\)'`
+ # Reject names that are not valid shell variable names.
+ expr "x$ac_useropt" : ".*[^-+._$as_cr_alnum]" >/dev/null &&
+ as_fn_error "invalid package name: $ac_useropt"
+ ac_useropt_orig=$ac_useropt
+ ac_useropt=`$as_echo "$ac_useropt" | sed 's/[-+.]/_/g'`
+ case $ac_user_opts in
+ *"
+"with_$ac_useropt"
+"*) ;;
+ *) ac_unrecognized_opts="$ac_unrecognized_opts$ac_unrecognized_sep--with-$ac_useropt_orig"
+ ac_unrecognized_sep=', ';;
+ esac
+ eval with_$ac_useropt=\$ac_optarg ;;
+
+ -without-* | --without-*)
+ ac_useropt=`expr "x$ac_option" : 'x-*without-\(.*\)'`
+ # Reject names that are not valid shell variable names.
+ expr "x$ac_useropt" : ".*[^-+._$as_cr_alnum]" >/dev/null &&
+ as_fn_error "invalid package name: $ac_useropt"
+ ac_useropt_orig=$ac_useropt
+ ac_useropt=`$as_echo "$ac_useropt" | sed 's/[-+.]/_/g'`
+ case $ac_user_opts in
+ *"
+"with_$ac_useropt"
+"*) ;;
+ *) ac_unrecognized_opts="$ac_unrecognized_opts$ac_unrecognized_sep--without-$ac_useropt_orig"
+ ac_unrecognized_sep=', ';;
+ esac
+ eval with_$ac_useropt=no ;;
+
+ --x)
+ # Obsolete; use --with-x.
+ with_x=yes ;;
+
+ -x-includes | --x-includes | --x-include | --x-includ | --x-inclu \
+ | --x-incl | --x-inc | --x-in | --x-i)
+ ac_prev=x_includes ;;
+ -x-includes=* | --x-includes=* | --x-include=* | --x-includ=* | --x-inclu=* \
+ | --x-incl=* | --x-inc=* | --x-in=* | --x-i=*)
+ x_includes=$ac_optarg ;;
+
+ -x-libraries | --x-libraries | --x-librarie | --x-librari \
+ | --x-librar | --x-libra | --x-libr | --x-lib | --x-li | --x-l)
+ ac_prev=x_libraries ;;
+ -x-libraries=* | --x-libraries=* | --x-librarie=* | --x-librari=* \
+ | --x-librar=* | --x-libra=* | --x-libr=* | --x-lib=* | --x-li=* | --x-l=*)
+ x_libraries=$ac_optarg ;;
+
+ -*) as_fn_error "unrecognized option: \`$ac_option'
+Try \`$0 --help' for more information."
+ ;;
+
+ *=*)
+ ac_envvar=`expr "x$ac_option" : 'x\([^=]*\)='`
+ # Reject names that are not valid shell variable names.
+ case $ac_envvar in #(
+ '' | [0-9]* | *[!_$as_cr_alnum]* )
+ as_fn_error "invalid variable name: \`$ac_envvar'" ;;
+ esac
+ eval $ac_envvar=\$ac_optarg
+ export $ac_envvar ;;
+
+ *)
+ # FIXME: should be removed in autoconf 3.0.
+ $as_echo "$as_me: WARNING: you should use --build, --host, --target" >&2
+ expr "x$ac_option" : ".*[^-._$as_cr_alnum]" >/dev/null &&
+ $as_echo "$as_me: WARNING: invalid host type: $ac_option" >&2
+ : ${build_alias=$ac_option} ${host_alias=$ac_option} ${target_alias=$ac_option}
+ ;;
+
+ esac
+done
+
+if test -n "$ac_prev"; then
+ ac_option=--`echo $ac_prev | sed 's/_/-/g'`
+ as_fn_error "missing argument to $ac_option"
+fi
+
+if test -n "$ac_unrecognized_opts"; then
+ case $enable_option_checking in
+ no) ;;
+ fatal) as_fn_error "unrecognized options: $ac_unrecognized_opts" ;;
+ *) $as_echo "$as_me: WARNING: unrecognized options: $ac_unrecognized_opts" >&2 ;;
+ esac
+fi
+
+# Check all directory arguments for consistency.
+for ac_var in exec_prefix prefix bindir sbindir libexecdir datarootdir \
+ datadir sysconfdir sharedstatedir localstatedir includedir \
+ oldincludedir docdir infodir htmldir dvidir pdfdir psdir \
+ libdir localedir mandir
+do
+ eval ac_val=\$$ac_var
+ # Remove trailing slashes.
+ case $ac_val in
+ */ )
+ ac_val=`expr "X$ac_val" : 'X\(.*[^/]\)' \| "X$ac_val" : 'X\(.*\)'`
+ eval $ac_var=\$ac_val;;
+ esac
+ # Be sure to have absolute directory names.
+ case $ac_val in
+ [\\/$]* | ?:[\\/]* ) continue;;
+ NONE | '' ) case $ac_var in *prefix ) continue;; esac;;
+ esac
+ as_fn_error "expected an absolute directory name for --$ac_var: $ac_val"
+done
+
+# There might be people who depend on the old broken behavior: `$host'
+# used to hold the argument of --host etc.
+# FIXME: To remove some day.
+build=$build_alias
+host=$host_alias
+target=$target_alias
+
+# FIXME: To remove some day.
+if test "x$host_alias" != x; then
+ if test "x$build_alias" = x; then
+ cross_compiling=maybe
+ $as_echo "$as_me: WARNING: If you wanted to set the --build type, don't use --host.
+ If a cross compiler is detected then cross compile mode will be used." >&2
+ elif test "x$build_alias" != "x$host_alias"; then
+ cross_compiling=yes
+ fi
+fi
+
+ac_tool_prefix=
+test -n "$host_alias" && ac_tool_prefix=$host_alias-
+
+test "$silent" = yes && exec 6>/dev/null
+
+
+ac_pwd=`pwd` && test -n "$ac_pwd" &&
+ac_ls_di=`ls -di .` &&
+ac_pwd_ls_di=`cd "$ac_pwd" && ls -di .` ||
+ as_fn_error "working directory cannot be determined"
+test "X$ac_ls_di" = "X$ac_pwd_ls_di" ||
+ as_fn_error "pwd does not report name of working directory"
+
+
+# Find the source files, if location was not specified.
+if test -z "$srcdir"; then
+ ac_srcdir_defaulted=yes
+ # Try the directory containing this script, then the parent directory.
+ ac_confdir=`$as_dirname -- "$as_myself" ||
+$as_expr X"$as_myself" : 'X\(.*[^/]\)//*[^/][^/]*/*$' \| \
+ X"$as_myself" : 'X\(//\)[^/]' \| \
+ X"$as_myself" : 'X\(//\)$' \| \
+ X"$as_myself" : 'X\(/\)' \| . 2>/dev/null ||
+$as_echo X"$as_myself" |
+ sed '/^X\(.*[^/]\)\/\/*[^/][^/]*\/*$/{
+ s//\1/
+ q
+ }
+ /^X\(\/\/\)[^/].*/{
+ s//\1/
+ q
+ }
+ /^X\(\/\/\)$/{
+ s//\1/
+ q
+ }
+ /^X\(\/\).*/{
+ s//\1/
+ q
+ }
+ s/.*/./; q'`
+ srcdir=$ac_confdir
+ if test ! -r "$srcdir/$ac_unique_file"; then
+ srcdir=..
+ fi
+else
+ ac_srcdir_defaulted=no
+fi
+if test ! -r "$srcdir/$ac_unique_file"; then
+ test "$ac_srcdir_defaulted" = yes && srcdir="$ac_confdir or .."
+ as_fn_error "cannot find sources ($ac_unique_file) in $srcdir"
+fi
+ac_msg="sources are in $srcdir, but \`cd $srcdir' does not work"
+ac_abs_confdir=`(
+ cd "$srcdir" && test -r "./$ac_unique_file" || as_fn_error "$ac_msg"
+ pwd)`
+# When building in place, set srcdir=.
+if test "$ac_abs_confdir" = "$ac_pwd"; then
+ srcdir=.
+fi
+# Remove unnecessary trailing slashes from srcdir.
+# Double slashes in file names in object file debugging info
+# mess up M-x gdb in Emacs.
+case $srcdir in
+*/) srcdir=`expr "X$srcdir" : 'X\(.*[^/]\)' \| "X$srcdir" : 'X\(.*\)'`;;
+esac
+for ac_var in $ac_precious_vars; do
+ eval ac_env_${ac_var}_set=\${${ac_var}+set}
+ eval ac_env_${ac_var}_value=\$${ac_var}
+ eval ac_cv_env_${ac_var}_set=\${${ac_var}+set}
+ eval ac_cv_env_${ac_var}_value=\$${ac_var}
+done
+
+#
+# Report the --help message.
+#
+if test "$ac_init_help" = "long"; then
+ # Omit some internal or obsolete options to make the list less imposing.
+ # This message is too long to be a string in the A/UX 3.1 sh.
+ cat <<_ACEOF
+\`configure' configures XZ Utils 4.999.9beta to adapt to many kinds of systems.
+
+Usage: $0 [OPTION]... [VAR=VALUE]...
+
+To assign environment variables (e.g., CC, CFLAGS...), specify them as
+VAR=VALUE. See below for descriptions of some of the useful variables.
+
+Defaults for the options are specified in brackets.
+
+Configuration:
+ -h, --help display this help and exit
+ --help=short display options specific to this package
+ --help=recursive display the short help of all the included packages
+ -V, --version display version information and exit
+ -q, --quiet, --silent do not print \`checking...' messages
+ --cache-file=FILE cache test results in FILE [disabled]
+ -C, --config-cache alias for \`--cache-file=config.cache'
+ -n, --no-create do not create output files
+ --srcdir=DIR find the sources in DIR [configure dir or \`..']
+
+Installation directories:
+ --prefix=PREFIX install architecture-independent files in PREFIX
+ [$ac_default_prefix]
+ --exec-prefix=EPREFIX install architecture-dependent files in EPREFIX
+ [PREFIX]
+
+By default, \`make install' will install all the files in
+\`$ac_default_prefix/bin', \`$ac_default_prefix/lib' etc. You can specify
+an installation prefix other than \`$ac_default_prefix' using \`--prefix',
+for instance \`--prefix=\$HOME'.
+
+For better control, use the options below.
+
+Fine tuning of the installation directories:
+ --bindir=DIR user executables [EPREFIX/bin]
+ --sbindir=DIR system admin executables [EPREFIX/sbin]
+ --libexecdir=DIR program executables [EPREFIX/libexec]
+ --sysconfdir=DIR read-only single-machine data [PREFIX/etc]
+ --sharedstatedir=DIR modifiable architecture-independent data [PREFIX/com]
+ --localstatedir=DIR modifiable single-machine data [PREFIX/var]
+ --libdir=DIR object code libraries [EPREFIX/lib]
+ --includedir=DIR C header files [PREFIX/include]
+ --oldincludedir=DIR C header files for non-gcc [/usr/include]
+ --datarootdir=DIR read-only arch.-independent data root [PREFIX/share]
+ --datadir=DIR read-only architecture-independent data [DATAROOTDIR]
+ --infodir=DIR info documentation [DATAROOTDIR/info]
+ --localedir=DIR locale-dependent data [DATAROOTDIR/locale]
+ --mandir=DIR man documentation [DATAROOTDIR/man]
+ --docdir=DIR documentation root [DATAROOTDIR/doc/xz]
+ --htmldir=DIR html documentation [DOCDIR]
+ --dvidir=DIR dvi documentation [DOCDIR]
+ --pdfdir=DIR pdf documentation [DOCDIR]
+ --psdir=DIR ps documentation [DOCDIR]
+_ACEOF
+
+ cat <<\_ACEOF
+
+Program names:
+ --program-prefix=PREFIX prepend PREFIX to installed program names
+ --program-suffix=SUFFIX append SUFFIX to installed program names
+ --program-transform-name=PROGRAM run sed PROGRAM on installed program names
+
+System types:
+ --build=BUILD configure for building on BUILD [guessed]
+ --host=HOST cross-compile to build programs to run on HOST [BUILD]
+_ACEOF
+fi
+
+if test -n "$ac_init_help"; then
+ case $ac_init_help in
+ short | recursive ) echo "Configuration of XZ Utils 4.999.9beta:";;
+ esac
+ cat <<\_ACEOF
+
+Optional Features:
+ --disable-option-checking ignore unrecognized --enable/--with options
+ --disable-FEATURE do not include FEATURE (same as --enable-FEATURE=no)
+ --enable-FEATURE[=ARG] include FEATURE [ARG=yes]
+ --enable-debug Enable debugging code.
+ --enable-encoders=LIST Comma-separated list of encoders to build.
+ Default=all. Available encoders: lzma1 lzma2
+ subblock delta x86 powerpc ia64 arm armthumb sparc
+ --enable-decoders=LIST Comma-separated list of decoders to build.
+ Default=all. Available decoders are the same as
+ available encoders.
+ --enable-match-finders=LIST
+ Comma-separated list of match finders to build.
+ Default=all. At least one match finder is required
+ for encoding with the LZMA1 and LZMA2 filters.
+ Available match finders: hc3 hc4 bt2 bt3 bt4
+ --enable-checks=LIST Comma-separated list of integrity checks to build.
+ Default=all. Available integrity checks: crc32 crc64
+ sha256
+ --disable-assembler Do not use assembler optimizations even if such
+ exist for the architecture.
+ --enable-unaligned-access
+ Enable if the system supports *fast* unaligned
+ memory access with 16-bit and 32-bit integers. By
+ default, this is enabled only on x86, x86_64, and
+ big endian PowerPC.
+ --enable-small Make liblzma smaller and a little slower. This is
+ disabled by default to optimize for speed.
+ --disable-threads Disable threading support. This makes some things
+ thread-unsafe.
+ --enable-dynamic=TYPE Set how command line tools are linked against
+ liblzma. TYPE can be mixed, yes, or no. The default
+ is mixed.
+ --disable-dependency-tracking speeds up one-time build
+ --enable-dependency-tracking do not reject slow dependency extractors
+ --enable-shared[=PKGS] build shared libraries [default=yes]
+ --enable-static[=PKGS] build static libraries [default=yes]
+ --enable-fast-install[=PKGS]
+ optimize for fast installation [default=yes]
+ --disable-libtool-lock avoid locking (might break parallel builds)
+ --disable-nls do not use Native Language Support
+ --disable-rpath do not hardcode runtime library paths
+ --disable-largefile omit support for large files
+ --enable-werror Enable -Werror to abort compilation on all compiler
+ warnings.
+
+Optional Packages:
+ --with-PACKAGE[=ARG] use PACKAGE [ARG=yes]
+ --without-PACKAGE do not use PACKAGE (same as --with-PACKAGE=no)
+ --with-pic try to use only PIC/non-PIC objects [default=use
+ both]
+ --with-gnu-ld assume the C compiler uses GNU ld [default=no]
+ --with-gnu-ld assume the C compiler uses GNU ld default=no
+ --with-libiconv-prefix[=DIR] search for libiconv in DIR/include and DIR/lib
+ --without-libiconv-prefix don't search for libiconv in includedir and libdir
+ --with-libintl-prefix[=DIR] search for libintl in DIR/include and DIR/lib
+ --without-libintl-prefix don't search for libintl in includedir and libdir
+
+Some influential environment variables:
+ CC C compiler command
+ CFLAGS C compiler flags
+ LDFLAGS linker flags, e.g. -L<lib dir> if you have libraries in a
+ nonstandard directory <lib dir>
+ LIBS libraries to pass to the linker, e.g. -l<library>
+ CPPFLAGS C/C++/Objective C preprocessor flags, e.g. -I<include dir> if
+ you have headers in a nonstandard directory <include dir>
+ CCAS assembler compiler command (defaults to CC)
+ CCASFLAGS assembler compiler flags (defaults to CFLAGS)
+ CPP C preprocessor
+
+Use these variables to override the choices made by `configure' or to help
+it to find libraries and programs with nonstandard names/locations.
+
+Report bugs to <lasse.collin@tukaani.org>.
+_ACEOF
+ac_status=$?
+fi
+
+if test "$ac_init_help" = "recursive"; then
+ # If there are subdirs, report their specific --help.
+ for ac_dir in : $ac_subdirs_all; do test "x$ac_dir" = x: && continue
+ test -d "$ac_dir" ||
+ { cd "$srcdir" && ac_pwd=`pwd` && srcdir=. && test -d "$ac_dir"; } ||
+ continue
+ ac_builddir=.
+
+case "$ac_dir" in
+.) ac_dir_suffix= ac_top_builddir_sub=. ac_top_build_prefix= ;;
+*)
+ ac_dir_suffix=/`$as_echo "$ac_dir" | sed 's|^\.[\\/]||'`
+ # A ".." for each directory in $ac_dir_suffix.
+ ac_top_builddir_sub=`$as_echo "$ac_dir_suffix" | sed 's|/[^\\/]*|/..|g;s|/||'`
+ case $ac_top_builddir_sub in
+ "") ac_top_builddir_sub=. ac_top_build_prefix= ;;
+ *) ac_top_build_prefix=$ac_top_builddir_sub/ ;;
+ esac ;;
+esac
+ac_abs_top_builddir=$ac_pwd
+ac_abs_builddir=$ac_pwd$ac_dir_suffix
+# for backward compatibility:
+ac_top_builddir=$ac_top_build_prefix
+
+case $srcdir in
+ .) # We are building in place.
+ ac_srcdir=.
+ ac_top_srcdir=$ac_top_builddir_sub
+ ac_abs_top_srcdir=$ac_pwd ;;
+ [\\/]* | ?:[\\/]* ) # Absolute name.
+ ac_srcdir=$srcdir$ac_dir_suffix;
+ ac_top_srcdir=$srcdir
+ ac_abs_top_srcdir=$srcdir ;;
+ *) # Relative name.
+ ac_srcdir=$ac_top_build_prefix$srcdir$ac_dir_suffix
+ ac_top_srcdir=$ac_top_build_prefix$srcdir
+ ac_abs_top_srcdir=$ac_pwd/$srcdir ;;
+esac
+ac_abs_srcdir=$ac_abs_top_srcdir$ac_dir_suffix
+
+ cd "$ac_dir" || { ac_status=$?; continue; }
+ # Check for guested configure.
+ if test -f "$ac_srcdir/configure.gnu"; then
+ echo &&
+ $SHELL "$ac_srcdir/configure.gnu" --help=recursive
+ elif test -f "$ac_srcdir/configure"; then
+ echo &&
+ $SHELL "$ac_srcdir/configure" --help=recursive
+ else
+ $as_echo "$as_me: WARNING: no configuration information is in $ac_dir" >&2
+ fi || ac_status=$?
+ cd "$ac_pwd" || { ac_status=$?; break; }
+ done
+fi
+
+test -n "$ac_init_help" && exit $ac_status
+if $ac_init_version; then
+ cat <<\_ACEOF
+XZ Utils configure 4.999.9beta
+generated by GNU Autoconf 2.64
+
+Copyright (C) 2009 Free Software Foundation, Inc.
+This configure script is free software; the Free Software Foundation
+gives unlimited permission to copy, distribute and modify it.
+_ACEOF
+ exit
+fi
+
+## ------------------------ ##
+## Autoconf initialization. ##
+## ------------------------ ##
+
+# ac_fn_c_try_compile LINENO
+# --------------------------
+# Try to compile conftest.$ac_ext, and return whether this succeeded.
+ac_fn_c_try_compile ()
+{
+ as_lineno=${as_lineno-"$1"} as_lineno_stack=as_lineno_stack=$as_lineno_stack
+ rm -f conftest.$ac_objext
+ if { { ac_try="$ac_compile"
+case "(($ac_try" in
+ *\"* | *\`* | *\\*) ac_try_echo=\$ac_try;;
+ *) ac_try_echo=$ac_try;;
+esac
+eval ac_try_echo="\"\$as_me:${as_lineno-$LINENO}: $ac_try_echo\""
+$as_echo "$ac_try_echo"; } >&5
+ (eval "$ac_compile") 2>conftest.err
+ ac_status=$?
+ if test -s conftest.err; then
+ grep -v '^ *+' conftest.err >conftest.er1
+ cat conftest.er1 >&5
+ mv -f conftest.er1 conftest.err
+ fi
+ $as_echo "$as_me:${as_lineno-$LINENO}: \$? = $ac_status" >&5
+ test $ac_status = 0; } && {
+ test -z "$ac_c_werror_flag" ||
+ test ! -s conftest.err
+ } && test -s conftest.$ac_objext; then :
+ ac_retval=0
+else
+ $as_echo "$as_me: failed program was:" >&5
+sed 's/^/| /' conftest.$ac_ext >&5
+
+ ac_retval=1
+fi
+ eval $as_lineno_stack; test "x$as_lineno_stack" = x && { as_lineno=; unset as_lineno;}
+ return $ac_retval
+
+} # ac_fn_c_try_compile
+
+# ac_fn_c_try_cpp LINENO
+# ----------------------
+# Try to preprocess conftest.$ac_ext, and return whether this succeeded.
+ac_fn_c_try_cpp ()
+{
+ as_lineno=${as_lineno-"$1"} as_lineno_stack=as_lineno_stack=$as_lineno_stack
+ if { { ac_try="$ac_cpp conftest.$ac_ext"
+case "(($ac_try" in
+ *\"* | *\`* | *\\*) ac_try_echo=\$ac_try;;
+ *) ac_try_echo=$ac_try;;
+esac
+eval ac_try_echo="\"\$as_me:${as_lineno-$LINENO}: $ac_try_echo\""
+$as_echo "$ac_try_echo"; } >&5
+ (eval "$ac_cpp conftest.$ac_ext") 2>conftest.err
+ ac_status=$?
+ if test -s conftest.err; then
+ grep -v '^ *+' conftest.err >conftest.er1
+ cat conftest.er1 >&5
+ mv -f conftest.er1 conftest.err
+ fi
+ $as_echo "$as_me:${as_lineno-$LINENO}: \$? = $ac_status" >&5
+ test $ac_status = 0; } >/dev/null && {
+ test -z "$ac_c_preproc_warn_flag$ac_c_werror_flag" ||
+ test ! -s conftest.err
+ }; then :
+ ac_retval=0
+else
+ $as_echo "$as_me: failed program was:" >&5
+sed 's/^/| /' conftest.$ac_ext >&5
+
+ ac_retval=1
+fi
+ eval $as_lineno_stack; test "x$as_lineno_stack" = x && { as_lineno=; unset as_lineno;}
+ return $ac_retval
+
+} # ac_fn_c_try_cpp
+
+# ac_fn_c_check_header_mongrel LINENO HEADER VAR INCLUDES
+# -------------------------------------------------------
+# Tests whether HEADER exists, giving a warning if it cannot be compiled using
+# the include files in INCLUDES and setting the cache variable VAR
+# accordingly.
+ac_fn_c_check_header_mongrel ()
+{
+ as_lineno=${as_lineno-"$1"} as_lineno_stack=as_lineno_stack=$as_lineno_stack
+ if { as_var=$3; eval "test \"\${$as_var+set}\" = set"; }; then :
+ { $as_echo "$as_me:${as_lineno-$LINENO}: checking for $2" >&5
+$as_echo_n "checking for $2... " >&6; }
+if { as_var=$3; eval "test \"\${$as_var+set}\" = set"; }; then :
+ $as_echo_n "(cached) " >&6
+fi
+eval ac_res=\$$3
+ { $as_echo "$as_me:${as_lineno-$LINENO}: result: $ac_res" >&5
+$as_echo "$ac_res" >&6; }
+else
+ # Is the header compilable?
+{ $as_echo "$as_me:${as_lineno-$LINENO}: checking $2 usability" >&5
+$as_echo_n "checking $2 usability... " >&6; }
+cat confdefs.h - <<_ACEOF >conftest.$ac_ext
+/* end confdefs.h. */
+$4
+#include <$2>
+_ACEOF
+if ac_fn_c_try_compile "$LINENO"; then :
+ ac_header_compiler=yes
+else
+ ac_header_compiler=no
+fi
+rm -f core conftest.err conftest.$ac_objext conftest.$ac_ext
+{ $as_echo "$as_me:${as_lineno-$LINENO}: result: $ac_header_compiler" >&5
+$as_echo "$ac_header_compiler" >&6; }
+
+# Is the header present?
+{ $as_echo "$as_me:${as_lineno-$LINENO}: checking $2 presence" >&5
+$as_echo_n "checking $2 presence... " >&6; }
+cat confdefs.h - <<_ACEOF >conftest.$ac_ext
+/* end confdefs.h. */
+#include <$2>
+_ACEOF
+if ac_fn_c_try_cpp "$LINENO"; then :
+ ac_header_preproc=yes
+else
+ ac_header_preproc=no
+fi
+rm -f conftest.err conftest.$ac_ext
+{ $as_echo "$as_me:${as_lineno-$LINENO}: result: $ac_header_preproc" >&5
+$as_echo "$ac_header_preproc" >&6; }
+
+# So? What about this header?
+case $ac_header_compiler:$ac_header_preproc:$ac_c_preproc_warn_flag in #((
+ yes:no: )
+ { $as_echo "$as_me:${as_lineno-$LINENO}: WARNING: $2: accepted by the compiler, rejected by the preprocessor!" >&5
+$as_echo "$as_me: WARNING: $2: accepted by the compiler, rejected by the preprocessor!" >&2;}
+ { $as_echo "$as_me:${as_lineno-$LINENO}: WARNING: $2: proceeding with the compiler's result" >&5
+$as_echo "$as_me: WARNING: $2: proceeding with the compiler's result" >&2;}
+ ;;
+ no:yes:* )
+ { $as_echo "$as_me:${as_lineno-$LINENO}: WARNING: $2: present but cannot be compiled" >&5
+$as_echo "$as_me: WARNING: $2: present but cannot be compiled" >&2;}
+ { $as_echo "$as_me:${as_lineno-$LINENO}: WARNING: $2: check for missing prerequisite headers?" >&5
+$as_echo "$as_me: WARNING: $2: check for missing prerequisite headers?" >&2;}
+ { $as_echo "$as_me:${as_lineno-$LINENO}: WARNING: $2: see the Autoconf documentation" >&5
+$as_echo "$as_me: WARNING: $2: see the Autoconf documentation" >&2;}
+ { $as_echo "$as_me:${as_lineno-$LINENO}: WARNING: $2: section \"Present But Cannot Be Compiled\"" >&5
+$as_echo "$as_me: WARNING: $2: section \"Present But Cannot Be Compiled\"" >&2;}
+ { $as_echo "$as_me:${as_lineno-$LINENO}: WARNING: $2: proceeding with the compiler's result" >&5
+$as_echo "$as_me: WARNING: $2: proceeding with the compiler's result" >&2;}
+( cat <<\_ASBOX
+## --------------------------------------- ##
+## Report this to lasse.collin@tukaani.org ##
+## --------------------------------------- ##
+_ASBOX
+ ) | sed "s/^/$as_me: WARNING: /" >&2
+ ;;
+esac
+ { $as_echo "$as_me:${as_lineno-$LINENO}: checking for $2" >&5
+$as_echo_n "checking for $2... " >&6; }
+if { as_var=$3; eval "test \"\${$as_var+set}\" = set"; }; then :
+ $as_echo_n "(cached) " >&6
+else
+ eval "$3=\$ac_header_compiler"
+fi
+eval ac_res=\$$3
+ { $as_echo "$as_me:${as_lineno-$LINENO}: result: $ac_res" >&5
+$as_echo "$ac_res" >&6; }
+fi
+ eval $as_lineno_stack; test "x$as_lineno_stack" = x && { as_lineno=; unset as_lineno;}
+
+} # ac_fn_c_check_header_mongrel
+
+# ac_fn_c_try_run LINENO
+# ----------------------
+# Try to link conftest.$ac_ext, and return whether this succeeded. Assumes
+# that executables *can* be run.
+ac_fn_c_try_run ()
+{
+ as_lineno=${as_lineno-"$1"} as_lineno_stack=as_lineno_stack=$as_lineno_stack
+ if { { ac_try="$ac_link"
+case "(($ac_try" in
+ *\"* | *\`* | *\\*) ac_try_echo=\$ac_try;;
+ *) ac_try_echo=$ac_try;;
+esac
+eval ac_try_echo="\"\$as_me:${as_lineno-$LINENO}: $ac_try_echo\""
+$as_echo "$ac_try_echo"; } >&5
+ (eval "$ac_link") 2>&5
+ ac_status=$?
+ $as_echo "$as_me:${as_lineno-$LINENO}: \$? = $ac_status" >&5
+ test $ac_status = 0; } && { ac_try='./conftest$ac_exeext'
+ { { case "(($ac_try" in
+ *\"* | *\`* | *\\*) ac_try_echo=\$ac_try;;
+ *) ac_try_echo=$ac_try;;
+esac
+eval ac_try_echo="\"\$as_me:${as_lineno-$LINENO}: $ac_try_echo\""
+$as_echo "$ac_try_echo"; } >&5
+ (eval "$ac_try") 2>&5
+ ac_status=$?
+ $as_echo "$as_me:${as_lineno-$LINENO}: \$? = $ac_status" >&5
+ test $ac_status = 0; }; }; then :
+ ac_retval=0
+else
+ $as_echo "$as_me: program exited with status $ac_status" >&5
+ $as_echo "$as_me: failed program was:" >&5
+sed 's/^/| /' conftest.$ac_ext >&5
+
+ ac_retval=$ac_status
+fi
+ rm -rf conftest.dSYM conftest_ipa8_conftest.oo
+ eval $as_lineno_stack; test "x$as_lineno_stack" = x && { as_lineno=; unset as_lineno;}
+ return $ac_retval
+
+} # ac_fn_c_try_run
+
+# ac_fn_c_check_header_compile LINENO HEADER VAR INCLUDES
+# -------------------------------------------------------
+# Tests whether HEADER exists and can be compiled using the include files in
+# INCLUDES, setting the cache variable VAR accordingly.
+ac_fn_c_check_header_compile ()
+{
+ as_lineno=${as_lineno-"$1"} as_lineno_stack=as_lineno_stack=$as_lineno_stack
+ { $as_echo "$as_me:${as_lineno-$LINENO}: checking for $2" >&5
+$as_echo_n "checking for $2... " >&6; }
+if { as_var=$3; eval "test \"\${$as_var+set}\" = set"; }; then :
+ $as_echo_n "(cached) " >&6
+else
+ cat confdefs.h - <<_ACEOF >conftest.$ac_ext
+/* end confdefs.h. */
+$4
+#include <$2>
+_ACEOF
+if ac_fn_c_try_compile "$LINENO"; then :
+ eval "$3=yes"
+else
+ eval "$3=no"
+fi
+rm -f core conftest.err conftest.$ac_objext conftest.$ac_ext
+fi
+eval ac_res=\$$3
+ { $as_echo "$as_me:${as_lineno-$LINENO}: result: $ac_res" >&5
+$as_echo "$ac_res" >&6; }
+ eval $as_lineno_stack; test "x$as_lineno_stack" = x && { as_lineno=; unset as_lineno;}
+
+} # ac_fn_c_check_header_compile
+
+# ac_fn_c_try_link LINENO
+# -----------------------
+# Try to link conftest.$ac_ext, and return whether this succeeded.
+ac_fn_c_try_link ()
+{
+ as_lineno=${as_lineno-"$1"} as_lineno_stack=as_lineno_stack=$as_lineno_stack
+ rm -f conftest.$ac_objext conftest$ac_exeext
+ if { { ac_try="$ac_link"
+case "(($ac_try" in
+ *\"* | *\`* | *\\*) ac_try_echo=\$ac_try;;
+ *) ac_try_echo=$ac_try;;
+esac
+eval ac_try_echo="\"\$as_me:${as_lineno-$LINENO}: $ac_try_echo\""
+$as_echo "$ac_try_echo"; } >&5
+ (eval "$ac_link") 2>conftest.err
+ ac_status=$?
+ if test -s conftest.err; then
+ grep -v '^ *+' conftest.err >conftest.er1
+ cat conftest.er1 >&5
+ mv -f conftest.er1 conftest.err
+ fi
+ $as_echo "$as_me:${as_lineno-$LINENO}: \$? = $ac_status" >&5
+ test $ac_status = 0; } && {
+ test -z "$ac_c_werror_flag" ||
+ test ! -s conftest.err
+ } && test -s conftest$ac_exeext && {
+ test "$cross_compiling" = yes ||
+ $as_test_x conftest$ac_exeext
+ }; then :
+ ac_retval=0
+else
+ $as_echo "$as_me: failed program was:" >&5
+sed 's/^/| /' conftest.$ac_ext >&5
+
+ ac_retval=1
+fi
+ # Delete the IPA/IPO (Inter Procedural Analysis/Optimization) information
+ # created by the PGI compiler (conftest_ipa8_conftest.oo), as it would
+ # interfere with the next link command; also delete a directory that is
+ # left behind by Apple's compiler. We do this before executing the actions.
+ rm -rf conftest.dSYM conftest_ipa8_conftest.oo
+ eval $as_lineno_stack; test "x$as_lineno_stack" = x && { as_lineno=; unset as_lineno;}
+ return $ac_retval
+
+} # ac_fn_c_try_link
+
+# ac_fn_c_check_func LINENO FUNC VAR
+# ----------------------------------
+# Tests whether FUNC exists, setting the cache variable VAR accordingly
+ac_fn_c_check_func ()
+{
+ as_lineno=${as_lineno-"$1"} as_lineno_stack=as_lineno_stack=$as_lineno_stack
+ { $as_echo "$as_me:${as_lineno-$LINENO}: checking for $2" >&5
+$as_echo_n "checking for $2... " >&6; }
+if { as_var=$3; eval "test \"\${$as_var+set}\" = set"; }; then :
+ $as_echo_n "(cached) " >&6
+else
+ cat confdefs.h - <<_ACEOF >conftest.$ac_ext
+/* end confdefs.h. */
+/* Define $2 to an innocuous variant, in case <limits.h> declares $2.
+ For example, HP-UX 11i <limits.h> declares gettimeofday. */
+#define $2 innocuous_$2
+
+/* System header to define __stub macros and hopefully few prototypes,
+ which can conflict with char $2 (); below.
+ Prefer <limits.h> to <assert.h> if __STDC__ is defined, since
+ <limits.h> exists even on freestanding compilers. */
+
+#ifdef __STDC__
+# include <limits.h>
+#else
+# include <assert.h>
+#endif
+
+#undef $2
+
+/* Override any GCC internal prototype to avoid an error.
+ Use char because int might match the return type of a GCC
+ builtin and then its argument prototype would still apply. */
+#ifdef __cplusplus
+extern "C"
+#endif
+char $2 ();
+/* The GNU C library defines this for functions which it implements
+ to always fail with ENOSYS. Some functions are actually named
+ something starting with __ and the normal name is an alias. */
+#if defined __stub_$2 || defined __stub___$2
+choke me
+#endif
+
+int
+main ()
+{
+return $2 ();
+ ;
+ return 0;
+}
+_ACEOF
+if ac_fn_c_try_link "$LINENO"; then :
+ eval "$3=yes"
+else
+ eval "$3=no"
+fi
+rm -f core conftest.err conftest.$ac_objext \
+ conftest$ac_exeext conftest.$ac_ext
+fi
+eval ac_res=\$$3
+ { $as_echo "$as_me:${as_lineno-$LINENO}: result: $ac_res" >&5
+$as_echo "$ac_res" >&6; }
+ eval $as_lineno_stack; test "x$as_lineno_stack" = x && { as_lineno=; unset as_lineno;}
+
+} # ac_fn_c_check_func
+
+# ac_fn_c_check_type LINENO TYPE VAR INCLUDES
+# -------------------------------------------
+# Tests whether TYPE exists after having included INCLUDES, setting cache
+# variable VAR accordingly.
+ac_fn_c_check_type ()
+{
+ as_lineno=${as_lineno-"$1"} as_lineno_stack=as_lineno_stack=$as_lineno_stack
+ { $as_echo "$as_me:${as_lineno-$LINENO}: checking for $2" >&5
+$as_echo_n "checking for $2... " >&6; }
+if { as_var=$3; eval "test \"\${$as_var+set}\" = set"; }; then :
+ $as_echo_n "(cached) " >&6
+else
+ eval "$3=no"
+ cat confdefs.h - <<_ACEOF >conftest.$ac_ext
+/* end confdefs.h. */
+$4
+int
+main ()
+{
+if (sizeof ($2))
+ return 0;
+ ;
+ return 0;
+}
+_ACEOF
+if ac_fn_c_try_compile "$LINENO"; then :
+ cat confdefs.h - <<_ACEOF >conftest.$ac_ext
+/* end confdefs.h. */
+$4
+int
+main ()
+{
+if (sizeof (($2)))
+ return 0;
+ ;
+ return 0;
+}
+_ACEOF
+if ac_fn_c_try_compile "$LINENO"; then :
+
+else
+ eval "$3=yes"
+fi
+rm -f core conftest.err conftest.$ac_objext conftest.$ac_ext
+fi
+rm -f core conftest.err conftest.$ac_objext conftest.$ac_ext
+fi
+eval ac_res=\$$3
+ { $as_echo "$as_me:${as_lineno-$LINENO}: result: $ac_res" >&5
+$as_echo "$ac_res" >&6; }
+ eval $as_lineno_stack; test "x$as_lineno_stack" = x && { as_lineno=; unset as_lineno;}
+
+} # ac_fn_c_check_type
+
+# ac_fn_c_find_uintX_t LINENO BITS VAR
+# ------------------------------------
+# Finds an unsigned integer type with width BITS, setting cache variable VAR
+# accordingly.
+ac_fn_c_find_uintX_t ()
+{
+ as_lineno=${as_lineno-"$1"} as_lineno_stack=as_lineno_stack=$as_lineno_stack
+ { $as_echo "$as_me:${as_lineno-$LINENO}: checking for uint$2_t" >&5
+$as_echo_n "checking for uint$2_t... " >&6; }
+if { as_var=$3; eval "test \"\${$as_var+set}\" = set"; }; then :
+ $as_echo_n "(cached) " >&6
+else
+ eval "$3=no"
+ for ac_type in uint$2_t 'unsigned int' 'unsigned long int' \
+ 'unsigned long long int' 'unsigned short int' 'unsigned char'; do
+ cat confdefs.h - <<_ACEOF >conftest.$ac_ext
+/* end confdefs.h. */
+$ac_includes_default
+int
+main ()
+{
+static int test_array [1 - 2 * !(($ac_type) -1 >> ($2 - 1) == 1)];
+test_array [0] = 0
+
+ ;
+ return 0;
+}
+_ACEOF
+if ac_fn_c_try_compile "$LINENO"; then :
+ case $ac_type in #(
+ uint$2_t) :
+ eval "$3=yes" ;; #(
+ *) :
+ eval "$3=\$ac_type" ;;
+esac
+fi
+rm -f core conftest.err conftest.$ac_objext conftest.$ac_ext
+ eval as_val=\$$3
+ if test "x$as_val" = x""no; then :
+
+else
+ break
+fi
+ done
+fi
+eval ac_res=\$$3
+ { $as_echo "$as_me:${as_lineno-$LINENO}: result: $ac_res" >&5
+$as_echo "$ac_res" >&6; }
+ eval $as_lineno_stack; test "x$as_lineno_stack" = x && { as_lineno=; unset as_lineno;}
+
+} # ac_fn_c_find_uintX_t
+
+# ac_fn_c_find_intX_t LINENO BITS VAR
+# -----------------------------------
+# Finds a signed integer type with width BITS, setting cache variable VAR
+# accordingly.
+ac_fn_c_find_intX_t ()
+{
+ as_lineno=${as_lineno-"$1"} as_lineno_stack=as_lineno_stack=$as_lineno_stack
+ { $as_echo "$as_me:${as_lineno-$LINENO}: checking for int$2_t" >&5
+$as_echo_n "checking for int$2_t... " >&6; }
+if { as_var=$3; eval "test \"\${$as_var+set}\" = set"; }; then :
+ $as_echo_n "(cached) " >&6
+else
+ eval "$3=no"
+ for ac_type in int$2_t 'int' 'long int' \
+ 'long long int' 'short int' 'signed char'; do
+ cat confdefs.h - <<_ACEOF >conftest.$ac_ext
+/* end confdefs.h. */
+$ac_includes_default
+int
+main ()
+{
+static int test_array [1 - 2 * !(0 < ($ac_type) (((($ac_type) 1 << ($2 - 2)) - 1) * 2 + 1))];
+test_array [0] = 0
+
+ ;
+ return 0;
+}
+_ACEOF
+if ac_fn_c_try_compile "$LINENO"; then :
+ cat confdefs.h - <<_ACEOF >conftest.$ac_ext
+/* end confdefs.h. */
+$ac_includes_default
+int
+main ()
+{
+static int test_array [1 - 2 * !(($ac_type) (((($ac_type) 1 << ($2 - 2)) - 1) * 2 + 1)
+ < ($ac_type) (((($ac_type) 1 << ($2 - 2)) - 1) * 2 + 2))];
+test_array [0] = 0
+
+ ;
+ return 0;
+}
+_ACEOF
+if ac_fn_c_try_compile "$LINENO"; then :
+
+else
+ case $ac_type in #(
+ int$2_t) :
+ eval "$3=yes" ;; #(
+ *) :
+ eval "$3=\$ac_type" ;;
+esac
+fi
+rm -f core conftest.err conftest.$ac_objext conftest.$ac_ext
+fi
+rm -f core conftest.err conftest.$ac_objext conftest.$ac_ext
+ eval as_val=\$$3
+ if test "x$as_val" = x""no; then :
+
+else
+ break
+fi
+ done
+fi
+eval ac_res=\$$3
+ { $as_echo "$as_me:${as_lineno-$LINENO}: result: $ac_res" >&5
+$as_echo "$ac_res" >&6; }
+ eval $as_lineno_stack; test "x$as_lineno_stack" = x && { as_lineno=; unset as_lineno;}
+
+} # ac_fn_c_find_intX_t
+
+# ac_fn_c_compute_int LINENO EXPR VAR INCLUDES
+# --------------------------------------------
+# Tries to find the compile-time value of EXPR in a program that includes
+# INCLUDES, setting VAR accordingly. Returns whether the value could be
+# computed
+ac_fn_c_compute_int ()
+{
+ as_lineno=${as_lineno-"$1"} as_lineno_stack=as_lineno_stack=$as_lineno_stack
+ if test "$cross_compiling" = yes; then
+ # Depending upon the size, compute the lo and hi bounds.
+cat confdefs.h - <<_ACEOF >conftest.$ac_ext
+/* end confdefs.h. */
+$4
+int
+main ()
+{
+static int test_array [1 - 2 * !(($2) >= 0)];
+test_array [0] = 0
+
+ ;
+ return 0;
+}
+_ACEOF
+if ac_fn_c_try_compile "$LINENO"; then :
+ ac_lo=0 ac_mid=0
+ while :; do
+ cat confdefs.h - <<_ACEOF >conftest.$ac_ext
+/* end confdefs.h. */
+$4
+int
+main ()
+{
+static int test_array [1 - 2 * !(($2) <= $ac_mid)];
+test_array [0] = 0
+
+ ;
+ return 0;
+}
+_ACEOF
+if ac_fn_c_try_compile "$LINENO"; then :
+ ac_hi=$ac_mid; break
+else
+ as_fn_arith $ac_mid + 1 && ac_lo=$as_val
+ if test $ac_lo -le $ac_mid; then
+ ac_lo= ac_hi=
+ break
+ fi
+ as_fn_arith 2 '*' $ac_mid + 1 && ac_mid=$as_val
+fi
+rm -f core conftest.err conftest.$ac_objext conftest.$ac_ext
+ done
+else
+ cat confdefs.h - <<_ACEOF >conftest.$ac_ext
+/* end confdefs.h. */
+$4
+int
+main ()
+{
+static int test_array [1 - 2 * !(($2) < 0)];
+test_array [0] = 0
+
+ ;
+ return 0;
+}
+_ACEOF
+if ac_fn_c_try_compile "$LINENO"; then :
+ ac_hi=-1 ac_mid=-1
+ while :; do
+ cat confdefs.h - <<_ACEOF >conftest.$ac_ext
+/* end confdefs.h. */
+$4
+int
+main ()
+{
+static int test_array [1 - 2 * !(($2) >= $ac_mid)];
+test_array [0] = 0
+
+ ;
+ return 0;
+}
+_ACEOF
+if ac_fn_c_try_compile "$LINENO"; then :
+ ac_lo=$ac_mid; break
+else
+ as_fn_arith '(' $ac_mid ')' - 1 && ac_hi=$as_val
+ if test $ac_mid -le $ac_hi; then
+ ac_lo= ac_hi=
+ break
+ fi
+ as_fn_arith 2 '*' $ac_mid && ac_mid=$as_val
+fi
+rm -f core conftest.err conftest.$ac_objext conftest.$ac_ext
+ done
+else
+ ac_lo= ac_hi=
+fi
+rm -f core conftest.err conftest.$ac_objext conftest.$ac_ext
+fi
+rm -f core conftest.err conftest.$ac_objext conftest.$ac_ext
+# Binary search between lo and hi bounds.
+while test "x$ac_lo" != "x$ac_hi"; do
+ as_fn_arith '(' $ac_hi - $ac_lo ')' / 2 + $ac_lo && ac_mid=$as_val
+ cat confdefs.h - <<_ACEOF >conftest.$ac_ext
+/* end confdefs.h. */
+$4
+int
+main ()
+{
+static int test_array [1 - 2 * !(($2) <= $ac_mid)];
+test_array [0] = 0
+
+ ;
+ return 0;
+}
+_ACEOF
+if ac_fn_c_try_compile "$LINENO"; then :
+ ac_hi=$ac_mid
+else
+ as_fn_arith '(' $ac_mid ')' + 1 && ac_lo=$as_val
+fi
+rm -f core conftest.err conftest.$ac_objext conftest.$ac_ext
+done
+case $ac_lo in #((
+?*) eval "$3=\$ac_lo"; ac_retval=0 ;;
+'') ac_retval=1 ;;
+esac
+ else
+ cat confdefs.h - <<_ACEOF >conftest.$ac_ext
+/* end confdefs.h. */
+$4
+static long int longval () { return $2; }
+static unsigned long int ulongval () { return $2; }
+#include <stdio.h>
+#include <stdlib.h>
+int
+main ()
+{
+
+ FILE *f = fopen ("conftest.val", "w");
+ if (! f)
+ return 1;
+ if (($2) < 0)
+ {
+ long int i = longval ();
+ if (i != ($2))
+ return 1;
+ fprintf (f, "%ld", i);
+ }
+ else
+ {
+ unsigned long int i = ulongval ();
+ if (i != ($2))
+ return 1;
+ fprintf (f, "%lu", i);
+ }
+ /* Do not output a trailing newline, as this causes \r\n confusion
+ on some platforms. */
+ return ferror (f) || fclose (f) != 0;
+
+ ;
+ return 0;
+}
+_ACEOF
+if ac_fn_c_try_run "$LINENO"; then :
+ echo >>conftest.val; read $3 <conftest.val; ac_retval=0
+else
+ ac_retval=1
+fi
+rm -f core *.core core.conftest.* gmon.out bb.out conftest$ac_exeext \
+ conftest.$ac_objext conftest.beam conftest.$ac_ext
+rm -f conftest.val
+
+ fi
+ eval $as_lineno_stack; test "x$as_lineno_stack" = x && { as_lineno=; unset as_lineno;}
+ return $ac_retval
+
+} # ac_fn_c_compute_int
+
+# ac_fn_c_check_member LINENO AGGR MEMBER VAR INCLUDES
+# ----------------------------------------------------
+# Tries to find if the field MEMBER exists in type AGGR, after including
+# INCLUDES, setting cache variable VAR accordingly.
+ac_fn_c_check_member ()
+{
+ as_lineno=${as_lineno-"$1"} as_lineno_stack=as_lineno_stack=$as_lineno_stack
+ { $as_echo "$as_me:${as_lineno-$LINENO}: checking for $2.$3" >&5
+$as_echo_n "checking for $2.$3... " >&6; }
+if { as_var=$4; eval "test \"\${$as_var+set}\" = set"; }; then :
+ $as_echo_n "(cached) " >&6
+else
+ cat confdefs.h - <<_ACEOF >conftest.$ac_ext
+/* end confdefs.h. */
+$5
+int
+main ()
+{
+static $2 ac_aggr;
+if (ac_aggr.$3)
+return 0;
+ ;
+ return 0;
+}
+_ACEOF
+if ac_fn_c_try_compile "$LINENO"; then :
+ eval "$4=yes"
+else
+ cat confdefs.h - <<_ACEOF >conftest.$ac_ext
+/* end confdefs.h. */
+$5
+int
+main ()
+{
+static $2 ac_aggr;
+if (sizeof ac_aggr.$3)
+return 0;
+ ;
+ return 0;
+}
+_ACEOF
+if ac_fn_c_try_compile "$LINENO"; then :
+ eval "$4=yes"
+else
+ eval "$4=no"
+fi
+rm -f core conftest.err conftest.$ac_objext conftest.$ac_ext
+fi
+rm -f core conftest.err conftest.$ac_objext conftest.$ac_ext
+fi
+eval ac_res=\$$4
+ { $as_echo "$as_me:${as_lineno-$LINENO}: result: $ac_res" >&5
+$as_echo "$ac_res" >&6; }
+ eval $as_lineno_stack; test "x$as_lineno_stack" = x && { as_lineno=; unset as_lineno;}
+
+} # ac_fn_c_check_member
+
+# ac_fn_c_check_decl LINENO SYMBOL VAR
+# ------------------------------------
+# Tests whether SYMBOL is declared, setting cache variable VAR accordingly.
+ac_fn_c_check_decl ()
+{
+ as_lineno=${as_lineno-"$1"} as_lineno_stack=as_lineno_stack=$as_lineno_stack
+ { $as_echo "$as_me:${as_lineno-$LINENO}: checking whether $2 is declared" >&5
+$as_echo_n "checking whether $2 is declared... " >&6; }
+if { as_var=$3; eval "test \"\${$as_var+set}\" = set"; }; then :
+ $as_echo_n "(cached) " >&6
+else
+ cat confdefs.h - <<_ACEOF >conftest.$ac_ext
+/* end confdefs.h. */
+$4
+int
+main ()
+{
+#ifndef $2
+ (void) $2;
+#endif
+
+ ;
+ return 0;
+}
+_ACEOF
+if ac_fn_c_try_compile "$LINENO"; then :
+ eval "$3=yes"
+else
+ eval "$3=no"
+fi
+rm -f core conftest.err conftest.$ac_objext conftest.$ac_ext
+fi
+eval ac_res=\$$3
+ { $as_echo "$as_me:${as_lineno-$LINENO}: result: $ac_res" >&5
+$as_echo "$ac_res" >&6; }
+ eval $as_lineno_stack; test "x$as_lineno_stack" = x && { as_lineno=; unset as_lineno;}
+
+} # ac_fn_c_check_decl
+cat >config.log <<_ACEOF
+This file contains any messages produced by compilers while
+running configure, to aid debugging if configure makes a mistake.
+
+It was created by XZ Utils $as_me 4.999.9beta, which was
+generated by GNU Autoconf 2.64. Invocation command line was
+
+ $ $0 $@
+
+_ACEOF
+exec 5>>config.log
+{
+cat <<_ASUNAME
+## --------- ##
+## Platform. ##
+## --------- ##
+
+hostname = `(hostname || uname -n) 2>/dev/null | sed 1q`
+uname -m = `(uname -m) 2>/dev/null || echo unknown`
+uname -r = `(uname -r) 2>/dev/null || echo unknown`
+uname -s = `(uname -s) 2>/dev/null || echo unknown`
+uname -v = `(uname -v) 2>/dev/null || echo unknown`
+
+/usr/bin/uname -p = `(/usr/bin/uname -p) 2>/dev/null || echo unknown`
+/bin/uname -X = `(/bin/uname -X) 2>/dev/null || echo unknown`
+
+/bin/arch = `(/bin/arch) 2>/dev/null || echo unknown`
+/usr/bin/arch -k = `(/usr/bin/arch -k) 2>/dev/null || echo unknown`
+/usr/convex/getsysinfo = `(/usr/convex/getsysinfo) 2>/dev/null || echo unknown`
+/usr/bin/hostinfo = `(/usr/bin/hostinfo) 2>/dev/null || echo unknown`
+/bin/machine = `(/bin/machine) 2>/dev/null || echo unknown`
+/usr/bin/oslevel = `(/usr/bin/oslevel) 2>/dev/null || echo unknown`
+/bin/universe = `(/bin/universe) 2>/dev/null || echo unknown`
+
+_ASUNAME
+
+as_save_IFS=$IFS; IFS=$PATH_SEPARATOR
+for as_dir in $PATH
+do
+ IFS=$as_save_IFS
+ test -z "$as_dir" && as_dir=.
+ $as_echo "PATH: $as_dir"
+ done
+IFS=$as_save_IFS
+
+} >&5
+
+cat >&5 <<_ACEOF
+
+
+## ----------- ##
+## Core tests. ##
+## ----------- ##
+
+_ACEOF
+
+
+# Keep a trace of the command line.
+# Strip out --no-create and --no-recursion so they do not pile up.
+# Strip out --silent because we don't want to record it for future runs.
+# Also quote any args containing shell meta-characters.
+# Make two passes to allow for proper duplicate-argument suppression.
+ac_configure_args=
+ac_configure_args0=
+ac_configure_args1=
+ac_must_keep_next=false
+for ac_pass in 1 2
+do
+ for ac_arg
+ do
+ case $ac_arg in
+ -no-create | --no-c* | -n | -no-recursion | --no-r*) continue ;;
+ -q | -quiet | --quiet | --quie | --qui | --qu | --q \
+ | -silent | --silent | --silen | --sile | --sil)
+ continue ;;
+ *\'*)
+ ac_arg=`$as_echo "$ac_arg" | sed "s/'/'\\\\\\\\''/g"` ;;
+ esac
+ case $ac_pass in
+ 1) as_fn_append ac_configure_args0 " '$ac_arg'" ;;
+ 2)
+ as_fn_append ac_configure_args1 " '$ac_arg'"
+ if test $ac_must_keep_next = true; then
+ ac_must_keep_next=false # Got value, back to normal.
+ else
+ case $ac_arg in
+ *=* | --config-cache | -C | -disable-* | --disable-* \
+ | -enable-* | --enable-* | -gas | --g* | -nfp | --nf* \
+ | -q | -quiet | --q* | -silent | --sil* | -v | -verb* \
+ | -with-* | --with-* | -without-* | --without-* | --x)
+ case "$ac_configure_args0 " in
+ "$ac_configure_args1"*" '$ac_arg' "* ) continue ;;
+ esac
+ ;;
+ -* ) ac_must_keep_next=true ;;
+ esac
+ fi
+ as_fn_append ac_configure_args " '$ac_arg'"
+ ;;
+ esac
+ done
+done
+{ ac_configure_args0=; unset ac_configure_args0;}
+{ ac_configure_args1=; unset ac_configure_args1;}
+
+# When interrupted or exit'd, cleanup temporary files, and complete
+# config.log. We remove comments because anyway the quotes in there
+# would cause problems or look ugly.
+# WARNING: Use '\'' to represent an apostrophe within the trap.
+# WARNING: Do not start the trap code with a newline, due to a FreeBSD 4.0 bug.
+trap 'exit_status=$?
+ # Save into config.log some information that might help in debugging.
+ {
+ echo
+
+ cat <<\_ASBOX
+## ---------------- ##
+## Cache variables. ##
+## ---------------- ##
+_ASBOX
+ echo
+ # The following way of writing the cache mishandles newlines in values,
+(
+ for ac_var in `(set) 2>&1 | sed -n '\''s/^\([a-zA-Z_][a-zA-Z0-9_]*\)=.*/\1/p'\''`; do
+ eval ac_val=\$$ac_var
+ case $ac_val in #(
+ *${as_nl}*)
+ case $ac_var in #(
+ *_cv_*) { $as_echo "$as_me:${as_lineno-$LINENO}: WARNING: cache variable $ac_var contains a newline" >&5
+$as_echo "$as_me: WARNING: cache variable $ac_var contains a newline" >&2;} ;;
+ esac
+ case $ac_var in #(
+ _ | IFS | as_nl) ;; #(
+ BASH_ARGV | BASH_SOURCE) eval $ac_var= ;; #(
+ *) { eval $ac_var=; unset $ac_var;} ;;
+ esac ;;
+ esac
+ done
+ (set) 2>&1 |
+ case $as_nl`(ac_space='\'' '\''; set) 2>&1` in #(
+ *${as_nl}ac_space=\ *)
+ sed -n \
+ "s/'\''/'\''\\\\'\'''\''/g;
+ s/^\\([_$as_cr_alnum]*_cv_[_$as_cr_alnum]*\\)=\\(.*\\)/\\1='\''\\2'\''/p"
+ ;; #(
+ *)
+ sed -n "/^[_$as_cr_alnum]*_cv_[_$as_cr_alnum]*=/p"
+ ;;
+ esac |
+ sort
+)
+ echo
+
+ cat <<\_ASBOX
+## ----------------- ##
+## Output variables. ##
+## ----------------- ##
+_ASBOX
+ echo
+ for ac_var in $ac_subst_vars
+ do
+ eval ac_val=\$$ac_var
+ case $ac_val in
+ *\'\''*) ac_val=`$as_echo "$ac_val" | sed "s/'\''/'\''\\\\\\\\'\'''\''/g"`;;
+ esac
+ $as_echo "$ac_var='\''$ac_val'\''"
+ done | sort
+ echo
+
+ if test -n "$ac_subst_files"; then
+ cat <<\_ASBOX
+## ------------------- ##
+## File substitutions. ##
+## ------------------- ##
+_ASBOX
+ echo
+ for ac_var in $ac_subst_files
+ do
+ eval ac_val=\$$ac_var
+ case $ac_val in
+ *\'\''*) ac_val=`$as_echo "$ac_val" | sed "s/'\''/'\''\\\\\\\\'\'''\''/g"`;;
+ esac
+ $as_echo "$ac_var='\''$ac_val'\''"
+ done | sort
+ echo
+ fi
+
+ if test -s confdefs.h; then
+ cat <<\_ASBOX
+## ----------- ##
+## confdefs.h. ##
+## ----------- ##
+_ASBOX
+ echo
+ cat confdefs.h
+ echo
+ fi
+ test "$ac_signal" != 0 &&
+ $as_echo "$as_me: caught signal $ac_signal"
+ $as_echo "$as_me: exit $exit_status"
+ } >&5
+ rm -f core *.core core.conftest.* &&
+ rm -f -r conftest* confdefs* conf$$* $ac_clean_files &&
+ exit $exit_status
+' 0
+for ac_signal in 1 2 13 15; do
+ trap 'ac_signal='$ac_signal'; as_fn_exit 1' $ac_signal
+done
+ac_signal=0
+
+# confdefs.h avoids OS command line length limits that DEFS can exceed.
+rm -f -r conftest* confdefs.h
+
+$as_echo "/* confdefs.h */" > confdefs.h
+
+# Predefined preprocessor variables.
+
+cat >>confdefs.h <<_ACEOF
+#define PACKAGE_NAME "$PACKAGE_NAME"
+_ACEOF
+
+cat >>confdefs.h <<_ACEOF
+#define PACKAGE_TARNAME "$PACKAGE_TARNAME"
+_ACEOF
+
+cat >>confdefs.h <<_ACEOF
+#define PACKAGE_VERSION "$PACKAGE_VERSION"
+_ACEOF
+
+cat >>confdefs.h <<_ACEOF
+#define PACKAGE_STRING "$PACKAGE_STRING"
+_ACEOF
+
+cat >>confdefs.h <<_ACEOF
+#define PACKAGE_BUGREPORT "$PACKAGE_BUGREPORT"
+_ACEOF
+
+cat >>confdefs.h <<_ACEOF
+#define PACKAGE_URL "$PACKAGE_URL"
+_ACEOF
+
+
+# Let the site file select an alternate cache file if it wants to.
+# Prefer an explicitly selected file to automatically selected ones.
+ac_site_file1=NONE
+ac_site_file2=NONE
+if test -n "$CONFIG_SITE"; then
+ ac_site_file1=$CONFIG_SITE
+elif test "x$prefix" != xNONE; then
+ ac_site_file1=$prefix/share/config.site
+ ac_site_file2=$prefix/etc/config.site
+else
+ ac_site_file1=$ac_default_prefix/share/config.site
+ ac_site_file2=$ac_default_prefix/etc/config.site
+fi
+for ac_site_file in "$ac_site_file1" "$ac_site_file2"
+do
+ test "x$ac_site_file" = xNONE && continue
+ if test -r "$ac_site_file"; then
+ { $as_echo "$as_me:${as_lineno-$LINENO}: loading site script $ac_site_file" >&5
+$as_echo "$as_me: loading site script $ac_site_file" >&6;}
+ sed 's/^/| /' "$ac_site_file" >&5
+ . "$ac_site_file"
+ fi
+done
+
+if test -r "$cache_file"; then
+ # Some versions of bash will fail to source /dev/null (special
+ # files actually), so we avoid doing that.
+ if test -f "$cache_file"; then
+ { $as_echo "$as_me:${as_lineno-$LINENO}: loading cache $cache_file" >&5
+$as_echo "$as_me: loading cache $cache_file" >&6;}
+ case $cache_file in
+ [\\/]* | ?:[\\/]* ) . "$cache_file";;
+ *) . "./$cache_file";;
+ esac
+ fi
+else
+ { $as_echo "$as_me:${as_lineno-$LINENO}: creating cache $cache_file" >&5
+$as_echo "$as_me: creating cache $cache_file" >&6;}
+ >$cache_file
+fi
+
+gt_needs="$gt_needs "
+# Check that the precious variables saved in the cache have kept the same
+# value.
+ac_cache_corrupted=false
+for ac_var in $ac_precious_vars; do
+ eval ac_old_set=\$ac_cv_env_${ac_var}_set
+ eval ac_new_set=\$ac_env_${ac_var}_set
+ eval ac_old_val=\$ac_cv_env_${ac_var}_value
+ eval ac_new_val=\$ac_env_${ac_var}_value
+ case $ac_old_set,$ac_new_set in
+ set,)
+ { $as_echo "$as_me:${as_lineno-$LINENO}: error: \`$ac_var' was set to \`$ac_old_val' in the previous run" >&5
+$as_echo "$as_me: error: \`$ac_var' was set to \`$ac_old_val' in the previous run" >&2;}
+ ac_cache_corrupted=: ;;
+ ,set)
+ { $as_echo "$as_me:${as_lineno-$LINENO}: error: \`$ac_var' was not set in the previous run" >&5
+$as_echo "$as_me: error: \`$ac_var' was not set in the previous run" >&2;}
+ ac_cache_corrupted=: ;;
+ ,);;
+ *)
+ if test "x$ac_old_val" != "x$ac_new_val"; then
+ # differences in whitespace do not lead to failure.
+ ac_old_val_w=`echo x $ac_old_val`
+ ac_new_val_w=`echo x $ac_new_val`
+ if test "$ac_old_val_w" != "$ac_new_val_w"; then
+ { $as_echo "$as_me:${as_lineno-$LINENO}: error: \`$ac_var' has changed since the previous run:" >&5
+$as_echo "$as_me: error: \`$ac_var' has changed since the previous run:" >&2;}
+ ac_cache_corrupted=:
+ else
+ { $as_echo "$as_me:${as_lineno-$LINENO}: warning: ignoring whitespace changes in \`$ac_var' since the previous run:" >&5
+$as_echo "$as_me: warning: ignoring whitespace changes in \`$ac_var' since the previous run:" >&2;}
+ eval $ac_var=\$ac_old_val
+ fi
+ { $as_echo "$as_me:${as_lineno-$LINENO}: former value: \`$ac_old_val'" >&5
+$as_echo "$as_me: former value: \`$ac_old_val'" >&2;}
+ { $as_echo "$as_me:${as_lineno-$LINENO}: current value: \`$ac_new_val'" >&5
+$as_echo "$as_me: current value: \`$ac_new_val'" >&2;}
+ fi;;
+ esac
+ # Pass precious variables to config.status.
+ if test "$ac_new_set" = set; then
+ case $ac_new_val in
+ *\'*) ac_arg=$ac_var=`$as_echo "$ac_new_val" | sed "s/'/'\\\\\\\\''/g"` ;;
+ *) ac_arg=$ac_var=$ac_new_val ;;
+ esac
+ case " $ac_configure_args " in
+ *" '$ac_arg' "*) ;; # Avoid dups. Use of quotes ensures accuracy.
+ *) as_fn_append ac_configure_args " '$ac_arg'" ;;
+ esac
+ fi
+done
+if $ac_cache_corrupted; then
+ { $as_echo "$as_me:${as_lineno-$LINENO}: error: in \`$ac_pwd':" >&5
+$as_echo "$as_me: error: in \`$ac_pwd':" >&2;}
+ { $as_echo "$as_me:${as_lineno-$LINENO}: error: changes in the environment can compromise the build" >&5
+$as_echo "$as_me: error: changes in the environment can compromise the build" >&2;}
+ as_fn_error "run \`make distclean' and/or \`rm $cache_file' and start over" "$LINENO" 5
+fi
+## -------------------- ##
+## Main body of script. ##
+## -------------------- ##
+
+ac_ext=c
+ac_cpp='$CPP $CPPFLAGS'
+ac_compile='$CC -c $CFLAGS $CPPFLAGS conftest.$ac_ext >&5'
+ac_link='$CC -o conftest$ac_exeext $CFLAGS $CPPFLAGS $LDFLAGS conftest.$ac_ext $LIBS >&5'
+ac_compiler_gnu=$ac_cv_c_compiler_gnu
+
+
+
+ac_aux_dir=
+for ac_dir in build-aux "$srcdir"/build-aux; do
+ for ac_t in install-sh install.sh shtool; do
+ if test -f "$ac_dir/$ac_t"; then
+ ac_aux_dir=$ac_dir
+ ac_install_sh="$ac_aux_dir/$ac_t -c"
+ break 2
+ fi
+ done
+done
+if test -z "$ac_aux_dir"; then
+ as_fn_error "cannot find install-sh, install.sh, or shtool in build-aux \"$srcdir\"/build-aux" "$LINENO" 5
+fi
+
+# These three variables are undocumented and unsupported,
+# and are intended to be withdrawn in a future Autoconf release.
+# They can cause serious problems if a builder's source tree is in a directory
+# whose full name contains unusual characters.
+ac_config_guess="$SHELL $ac_aux_dir/config.guess" # Please don't use this var.
+ac_config_sub="$SHELL $ac_aux_dir/config.sub" # Please don't use this var.
+ac_configure="$SHELL $ac_aux_dir/configure" # Please don't use this var.
+
+
+
+ac_config_headers="$ac_config_headers config.h"
+
+
+PACKAGE_HOMEPAGE=http://tukaani.org/xz/
+
+cat >>confdefs.h <<_ACEOF
+#define PACKAGE_HOMEPAGE "$PACKAGE_HOMEPAGE"
+_ACEOF
+
+
+
+echo
+echo "$PACKAGE_STRING"
+
+echo
+echo "System type:"
+# This is needed to know if assembler optimizations can be used.
+# Make sure we can run config.sub.
+$SHELL "$ac_aux_dir/config.sub" sun4 >/dev/null 2>&1 ||
+ as_fn_error "cannot run $SHELL $ac_aux_dir/config.sub" "$LINENO" 5
+
+{ $as_echo "$as_me:${as_lineno-$LINENO}: checking build system type" >&5
+$as_echo_n "checking build system type... " >&6; }
+if test "${ac_cv_build+set}" = set; then :
+ $as_echo_n "(cached) " >&6
+else
+ ac_build_alias=$build_alias
+test "x$ac_build_alias" = x &&
+ ac_build_alias=`$SHELL "$ac_aux_dir/config.guess"`
+test "x$ac_build_alias" = x &&
+ as_fn_error "cannot guess build type; you must specify one" "$LINENO" 5
+ac_cv_build=`$SHELL "$ac_aux_dir/config.sub" $ac_build_alias` ||
+ as_fn_error "$SHELL $ac_aux_dir/config.sub $ac_build_alias failed" "$LINENO" 5
+
+fi
+{ $as_echo "$as_me:${as_lineno-$LINENO}: result: $ac_cv_build" >&5
+$as_echo "$ac_cv_build" >&6; }
+case $ac_cv_build in
+*-*-*) ;;
+*) as_fn_error "invalid value of canonical build" "$LINENO" 5;;
+esac
+build=$ac_cv_build
+ac_save_IFS=$IFS; IFS='-'
+set x $ac_cv_build
+shift
+build_cpu=$1
+build_vendor=$2
+shift; shift
+# Remember, the first character of IFS is used to create $*,
+# except with old shells:
+build_os=$*
+IFS=$ac_save_IFS
+case $build_os in *\ *) build_os=`echo "$build_os" | sed 's/ /-/g'`;; esac
+
+
+{ $as_echo "$as_me:${as_lineno-$LINENO}: checking host system type" >&5
+$as_echo_n "checking host system type... " >&6; }
+if test "${ac_cv_host+set}" = set; then :
+ $as_echo_n "(cached) " >&6
+else
+ if test "x$host_alias" = x; then
+ ac_cv_host=$ac_cv_build
+else
+ ac_cv_host=`$SHELL "$ac_aux_dir/config.sub" $host_alias` ||
+ as_fn_error "$SHELL $ac_aux_dir/config.sub $host_alias failed" "$LINENO" 5
+fi
+
+fi
+{ $as_echo "$as_me:${as_lineno-$LINENO}: result: $ac_cv_host" >&5
+$as_echo "$ac_cv_host" >&6; }
+case $ac_cv_host in
+*-*-*) ;;
+*) as_fn_error "invalid value of canonical host" "$LINENO" 5;;
+esac
+host=$ac_cv_host
+ac_save_IFS=$IFS; IFS='-'
+set x $ac_cv_host
+shift
+host_cpu=$1
+host_vendor=$2
+shift; shift
+# Remember, the first character of IFS is used to create $*,
+# except with old shells:
+host_os=$*
+IFS=$ac_save_IFS
+case $host_os in *\ *) host_os=`echo "$host_os" | sed 's/ /-/g'`;; esac
+
+
+
+# We do some special things on Windows (32-bit or 64-bit) builds.
+case $host_os in
+ mingw* | cygwin*) is_w32=yes ;;
+ *) is_w32=no ;;
+esac
+ if test "$is_w32" = yes; then
+ COND_W32_TRUE=
+ COND_W32_FALSE='#'
+else
+ COND_W32_TRUE='#'
+ COND_W32_FALSE=
+fi
+
+
+
+echo
+echo "Configure options:"
+AM_CFLAGS=
+
+
+#############
+# Debugging #
+#############
+
+{ $as_echo "$as_me:${as_lineno-$LINENO}: checking if debugging code should be compiled" >&5
+$as_echo_n "checking if debugging code should be compiled... " >&6; }
+# Check whether --enable-debug was given.
+if test "${enable_debug+set}" = set; then :
+ enableval=$enable_debug;
+else
+ enable_debug=no
+fi
+
+if test "x$enable_debug" = xyes; then
+ { $as_echo "$as_me:${as_lineno-$LINENO}: result: yes" >&5
+$as_echo "yes" >&6; }
+else
+
+$as_echo "#define NDEBUG 1" >>confdefs.h
+
+ { $as_echo "$as_me:${as_lineno-$LINENO}: result: no" >&5
+$as_echo "no" >&6; }
+fi
+
+
+###########
+# Filters #
+###########
+
+
+
+
+enable_filter_lzma1=no
+enable_encoder_lzma1=no
+enable_decoder_lzma1=no
+enable_filter_lzma2=no
+enable_encoder_lzma2=no
+enable_decoder_lzma2=no
+enable_filter_subblock=no
+enable_encoder_subblock=no
+enable_decoder_subblock=no
+enable_filter_delta=no
+enable_encoder_delta=no
+enable_decoder_delta=no
+enable_filter_x86=no
+enable_encoder_x86=no
+enable_decoder_x86=no
+enable_filter_powerpc=no
+enable_encoder_powerpc=no
+enable_decoder_powerpc=no
+enable_filter_ia64=no
+enable_encoder_ia64=no
+enable_decoder_ia64=no
+enable_filter_arm=no
+enable_encoder_arm=no
+enable_decoder_arm=no
+enable_filter_armthumb=no
+enable_encoder_armthumb=no
+enable_decoder_armthumb=no
+enable_filter_sparc=no
+enable_encoder_sparc=no
+enable_decoder_sparc=no
+
+{ $as_echo "$as_me:${as_lineno-$LINENO}: checking which encoders to build" >&5
+$as_echo_n "checking which encoders to build... " >&6; }
+# Check whether --enable-encoders was given.
+if test "${enable_encoders+set}" = set; then :
+ enableval=$enable_encoders;
+else
+ enable_encoders=lzma1,lzma2,subblock,delta,x86,powerpc,ia64,arm,armthumb,sparc
+fi
+
+enable_encoders=`echo "$enable_encoders" | sed 's/,subblock//; s/,/ /g'`
+if test "x$enable_encoders" = xno || test "x$enable_encoders" = x; then
+ { $as_echo "$as_me:${as_lineno-$LINENO}: result: (none)" >&5
+$as_echo "(none)" >&6; }
+else
+
+$as_echo "#define HAVE_ENCODER 1" >>confdefs.h
+
+ for arg in $enable_encoders
+ do
+ case $arg in
+ lzma1)
+ enable_filter_lzma1=yes
+ enable_encoder_lzma1=yes
+
+$as_echo "#define HAVE_ENCODER_LZMA1 1" >>confdefs.h
+
+ ;;
+ lzma2)
+ enable_filter_lzma2=yes
+ enable_encoder_lzma2=yes
+
+$as_echo "#define HAVE_ENCODER_LZMA2 1" >>confdefs.h
+
+ ;;
+ subblock)
+ enable_filter_subblock=yes
+ enable_encoder_subblock=yes
+
+$as_echo "#define HAVE_ENCODER_SUBBLOCK 1" >>confdefs.h
+
+ ;;
+ delta)
+ enable_filter_delta=yes
+ enable_encoder_delta=yes
+
+$as_echo "#define HAVE_ENCODER_DELTA 1" >>confdefs.h
+
+ ;;
+ x86)
+ enable_filter_x86=yes
+ enable_encoder_x86=yes
+
+$as_echo "#define HAVE_ENCODER_X86 1" >>confdefs.h
+
+ ;;
+ powerpc)
+ enable_filter_powerpc=yes
+ enable_encoder_powerpc=yes
+
+$as_echo "#define HAVE_ENCODER_POWERPC 1" >>confdefs.h
+
+ ;;
+ ia64)
+ enable_filter_ia64=yes
+ enable_encoder_ia64=yes
+
+$as_echo "#define HAVE_ENCODER_IA64 1" >>confdefs.h
+
+ ;;
+ arm)
+ enable_filter_arm=yes
+ enable_encoder_arm=yes
+
+$as_echo "#define HAVE_ENCODER_ARM 1" >>confdefs.h
+
+ ;;
+ armthumb)
+ enable_filter_armthumb=yes
+ enable_encoder_armthumb=yes
+
+$as_echo "#define HAVE_ENCODER_ARMTHUMB 1" >>confdefs.h
+
+ ;;
+ sparc)
+ enable_filter_sparc=yes
+ enable_encoder_sparc=yes
+
+$as_echo "#define HAVE_ENCODER_SPARC 1" >>confdefs.h
+
+ ;;
+ *)
+ { $as_echo "$as_me:${as_lineno-$LINENO}: result: " >&5
+$as_echo "" >&6; }
+ as_fn_error "unknown filter: $arg" "$LINENO" 5
+ ;;
+ esac
+ done
+ { $as_echo "$as_me:${as_lineno-$LINENO}: result: $enable_encoders" >&5
+$as_echo "$enable_encoders" >&6; }
+fi
+
+{ $as_echo "$as_me:${as_lineno-$LINENO}: checking which decoders to build" >&5
+$as_echo_n "checking which decoders to build... " >&6; }
+# Check whether --enable-decoders was given.
+if test "${enable_decoders+set}" = set; then :
+ enableval=$enable_decoders;
+else
+ enable_decoders=lzma1,lzma2,subblock,delta,x86,powerpc,ia64,arm,armthumb,sparc
+fi
+
+enable_decoders=`echo "$enable_decoders" | sed 's/,subblock//; s/,/ /g'`
+if test "x$enable_decoders" = xno || test "x$enable_decoders" = x; then
+ { $as_echo "$as_me:${as_lineno-$LINENO}: result: (none)" >&5
+$as_echo "(none)" >&6; }
+else
+
+$as_echo "#define HAVE_DECODER 1" >>confdefs.h
+
+ for arg in $enable_decoders
+ do
+ case $arg in
+ lzma1)
+ enable_filter_lzma1=yes
+ enable_decoder_lzma1=yes
+
+$as_echo "#define HAVE_DECODER_LZMA1 1" >>confdefs.h
+
+ ;;
+ lzma2)
+ enable_filter_lzma2=yes
+ enable_decoder_lzma2=yes
+
+$as_echo "#define HAVE_DECODER_LZMA2 1" >>confdefs.h
+
+ ;;
+ subblock)
+ enable_filter_subblock=yes
+ enable_decoder_subblock=yes
+
+$as_echo "#define HAVE_DECODER_SUBBLOCK 1" >>confdefs.h
+
+ ;;
+ delta)
+ enable_filter_delta=yes
+ enable_decoder_delta=yes
+
+$as_echo "#define HAVE_DECODER_DELTA 1" >>confdefs.h
+
+ ;;
+ x86)
+ enable_filter_x86=yes
+ enable_decoder_x86=yes
+
+$as_echo "#define HAVE_DECODER_X86 1" >>confdefs.h
+
+ ;;
+ powerpc)
+ enable_filter_powerpc=yes
+ enable_decoder_powerpc=yes
+
+$as_echo "#define HAVE_DECODER_POWERPC 1" >>confdefs.h
+
+ ;;
+ ia64)
+ enable_filter_ia64=yes
+ enable_decoder_ia64=yes
+
+$as_echo "#define HAVE_DECODER_IA64 1" >>confdefs.h
+
+ ;;
+ arm)
+ enable_filter_arm=yes
+ enable_decoder_arm=yes
+
+$as_echo "#define HAVE_DECODER_ARM 1" >>confdefs.h
+
+ ;;
+ armthumb)
+ enable_filter_armthumb=yes
+ enable_decoder_armthumb=yes
+
+$as_echo "#define HAVE_DECODER_ARMTHUMB 1" >>confdefs.h
+
+ ;;
+ sparc)
+ enable_filter_sparc=yes
+ enable_decoder_sparc=yes
+
+$as_echo "#define HAVE_DECODER_SPARC 1" >>confdefs.h
+
+ ;;
+ *)
+ { $as_echo "$as_me:${as_lineno-$LINENO}: result: " >&5
+$as_echo "" >&6; }
+ as_fn_error "unknown filter: $arg" "$LINENO" 5
+ ;;
+ esac
+ done
+
+ # LZMA2 requires that LZMA1 is enabled.
+ test "x$enable_encoder_lzma2" = xyes && enable_encoder_lzma1=yes
+ test "x$enable_decoder_lzma2" = xyes && enable_decoder_lzma1=yes
+
+ { $as_echo "$as_me:${as_lineno-$LINENO}: result: $enable_decoders" >&5
+$as_echo "$enable_decoders" >&6; }
+fi
+
+if test "x$enable_encoder_lzma2$enable_encoder_lzma1" = xyesno \
+ || test "x$enable_decoder_lzma2$enable_decoder_lzma1" = xyesno; then
+ as_fn_error "LZMA2 requires that LZMA1 is also enabled." "$LINENO" 5
+fi
+
+ if test "x$enable_encoders" != xno && test "x$enable_encoders" != x; then
+ COND_MAIN_ENCODER_TRUE=
+ COND_MAIN_ENCODER_FALSE='#'
+else
+ COND_MAIN_ENCODER_TRUE='#'
+ COND_MAIN_ENCODER_FALSE=
+fi
+
+ if test "x$enable_decoders" != xno && test "x$enable_decoders" != x; then
+ COND_MAIN_DECODER_TRUE=
+ COND_MAIN_DECODER_FALSE='#'
+else
+ COND_MAIN_DECODER_TRUE='#'
+ COND_MAIN_DECODER_FALSE=
+fi
+
+
+ if test "x$enable_filter_lzma1" = xyes; then
+ COND_FILTER_LZMA1_TRUE=
+ COND_FILTER_LZMA1_FALSE='#'
+else
+ COND_FILTER_LZMA1_TRUE='#'
+ COND_FILTER_LZMA1_FALSE=
+fi
+
+ if test "x$enable_encoder_lzma1" = xyes; then
+ COND_ENCODER_LZMA1_TRUE=
+ COND_ENCODER_LZMA1_FALSE='#'
+else
+ COND_ENCODER_LZMA1_TRUE='#'
+ COND_ENCODER_LZMA1_FALSE=
+fi
+
+ if test "x$enable_decoder_lzma1" = xyes; then
+ COND_DECODER_LZMA1_TRUE=
+ COND_DECODER_LZMA1_FALSE='#'
+else
+ COND_DECODER_LZMA1_TRUE='#'
+ COND_DECODER_LZMA1_FALSE=
+fi
+
+ if test "x$enable_filter_lzma2" = xyes; then
+ COND_FILTER_LZMA2_TRUE=
+ COND_FILTER_LZMA2_FALSE='#'
+else
+ COND_FILTER_LZMA2_TRUE='#'
+ COND_FILTER_LZMA2_FALSE=
+fi
+
+ if test "x$enable_encoder_lzma2" = xyes; then
+ COND_ENCODER_LZMA2_TRUE=
+ COND_ENCODER_LZMA2_FALSE='#'
+else
+ COND_ENCODER_LZMA2_TRUE='#'
+ COND_ENCODER_LZMA2_FALSE=
+fi
+
+ if test "x$enable_decoder_lzma2" = xyes; then
+ COND_DECODER_LZMA2_TRUE=
+ COND_DECODER_LZMA2_FALSE='#'
+else
+ COND_DECODER_LZMA2_TRUE='#'
+ COND_DECODER_LZMA2_FALSE=
+fi
+
+ if test "x$enable_filter_subblock" = xyes; then
+ COND_FILTER_SUBBLOCK_TRUE=
+ COND_FILTER_SUBBLOCK_FALSE='#'
+else
+ COND_FILTER_SUBBLOCK_TRUE='#'
+ COND_FILTER_SUBBLOCK_FALSE=
+fi
+
+ if test "x$enable_encoder_subblock" = xyes; then
+ COND_ENCODER_SUBBLOCK_TRUE=
+ COND_ENCODER_SUBBLOCK_FALSE='#'
+else
+ COND_ENCODER_SUBBLOCK_TRUE='#'
+ COND_ENCODER_SUBBLOCK_FALSE=
+fi
+
+ if test "x$enable_decoder_subblock" = xyes; then
+ COND_DECODER_SUBBLOCK_TRUE=
+ COND_DECODER_SUBBLOCK_FALSE='#'
+else
+ COND_DECODER_SUBBLOCK_TRUE='#'
+ COND_DECODER_SUBBLOCK_FALSE=
+fi
+
+ if test "x$enable_filter_delta" = xyes; then
+ COND_FILTER_DELTA_TRUE=
+ COND_FILTER_DELTA_FALSE='#'
+else
+ COND_FILTER_DELTA_TRUE='#'
+ COND_FILTER_DELTA_FALSE=
+fi
+
+ if test "x$enable_encoder_delta" = xyes; then
+ COND_ENCODER_DELTA_TRUE=
+ COND_ENCODER_DELTA_FALSE='#'
+else
+ COND_ENCODER_DELTA_TRUE='#'
+ COND_ENCODER_DELTA_FALSE=
+fi
+
+ if test "x$enable_decoder_delta" = xyes; then
+ COND_DECODER_DELTA_TRUE=
+ COND_DECODER_DELTA_FALSE='#'
+else
+ COND_DECODER_DELTA_TRUE='#'
+ COND_DECODER_DELTA_FALSE=
+fi
+
+ if test "x$enable_filter_x86" = xyes; then
+ COND_FILTER_X86_TRUE=
+ COND_FILTER_X86_FALSE='#'
+else
+ COND_FILTER_X86_TRUE='#'
+ COND_FILTER_X86_FALSE=
+fi
+
+ if test "x$enable_encoder_x86" = xyes; then
+ COND_ENCODER_X86_TRUE=
+ COND_ENCODER_X86_FALSE='#'
+else
+ COND_ENCODER_X86_TRUE='#'
+ COND_ENCODER_X86_FALSE=
+fi
+
+ if test "x$enable_decoder_x86" = xyes; then
+ COND_DECODER_X86_TRUE=
+ COND_DECODER_X86_FALSE='#'
+else
+ COND_DECODER_X86_TRUE='#'
+ COND_DECODER_X86_FALSE=
+fi
+
+ if test "x$enable_filter_powerpc" = xyes; then
+ COND_FILTER_POWERPC_TRUE=
+ COND_FILTER_POWERPC_FALSE='#'
+else
+ COND_FILTER_POWERPC_TRUE='#'
+ COND_FILTER_POWERPC_FALSE=
+fi
+
+ if test "x$enable_encoder_powerpc" = xyes; then
+ COND_ENCODER_POWERPC_TRUE=
+ COND_ENCODER_POWERPC_FALSE='#'
+else
+ COND_ENCODER_POWERPC_TRUE='#'
+ COND_ENCODER_POWERPC_FALSE=
+fi
+
+ if test "x$enable_decoder_powerpc" = xyes; then
+ COND_DECODER_POWERPC_TRUE=
+ COND_DECODER_POWERPC_FALSE='#'
+else
+ COND_DECODER_POWERPC_TRUE='#'
+ COND_DECODER_POWERPC_FALSE=
+fi
+
+ if test "x$enable_filter_ia64" = xyes; then
+ COND_FILTER_IA64_TRUE=
+ COND_FILTER_IA64_FALSE='#'
+else
+ COND_FILTER_IA64_TRUE='#'
+ COND_FILTER_IA64_FALSE=
+fi
+
+ if test "x$enable_encoder_ia64" = xyes; then
+ COND_ENCODER_IA64_TRUE=
+ COND_ENCODER_IA64_FALSE='#'
+else
+ COND_ENCODER_IA64_TRUE='#'
+ COND_ENCODER_IA64_FALSE=
+fi
+
+ if test "x$enable_decoder_ia64" = xyes; then
+ COND_DECODER_IA64_TRUE=
+ COND_DECODER_IA64_FALSE='#'
+else
+ COND_DECODER_IA64_TRUE='#'
+ COND_DECODER_IA64_FALSE=
+fi
+
+ if test "x$enable_filter_arm" = xyes; then
+ COND_FILTER_ARM_TRUE=
+ COND_FILTER_ARM_FALSE='#'
+else
+ COND_FILTER_ARM_TRUE='#'
+ COND_FILTER_ARM_FALSE=
+fi
+
+ if test "x$enable_encoder_arm" = xyes; then
+ COND_ENCODER_ARM_TRUE=
+ COND_ENCODER_ARM_FALSE='#'
+else
+ COND_ENCODER_ARM_TRUE='#'
+ COND_ENCODER_ARM_FALSE=
+fi
+
+ if test "x$enable_decoder_arm" = xyes; then
+ COND_DECODER_ARM_TRUE=
+ COND_DECODER_ARM_FALSE='#'
+else
+ COND_DECODER_ARM_TRUE='#'
+ COND_DECODER_ARM_FALSE=
+fi
+
+ if test "x$enable_filter_armthumb" = xyes; then
+ COND_FILTER_ARMTHUMB_TRUE=
+ COND_FILTER_ARMTHUMB_FALSE='#'
+else
+ COND_FILTER_ARMTHUMB_TRUE='#'
+ COND_FILTER_ARMTHUMB_FALSE=
+fi
+
+ if test "x$enable_encoder_armthumb" = xyes; then
+ COND_ENCODER_ARMTHUMB_TRUE=
+ COND_ENCODER_ARMTHUMB_FALSE='#'
+else
+ COND_ENCODER_ARMTHUMB_TRUE='#'
+ COND_ENCODER_ARMTHUMB_FALSE=
+fi
+
+ if test "x$enable_decoder_armthumb" = xyes; then
+ COND_DECODER_ARMTHUMB_TRUE=
+ COND_DECODER_ARMTHUMB_FALSE='#'
+else
+ COND_DECODER_ARMTHUMB_TRUE='#'
+ COND_DECODER_ARMTHUMB_FALSE=
+fi
+
+ if test "x$enable_filter_sparc" = xyes; then
+ COND_FILTER_SPARC_TRUE=
+ COND_FILTER_SPARC_FALSE='#'
+else
+ COND_FILTER_SPARC_TRUE='#'
+ COND_FILTER_SPARC_FALSE=
+fi
+
+ if test "x$enable_encoder_sparc" = xyes; then
+ COND_ENCODER_SPARC_TRUE=
+ COND_ENCODER_SPARC_FALSE='#'
+else
+ COND_ENCODER_SPARC_TRUE='#'
+ COND_ENCODER_SPARC_FALSE=
+fi
+
+ if test "x$enable_decoder_sparc" = xyes; then
+ COND_DECODER_SPARC_TRUE=
+ COND_DECODER_SPARC_FALSE='#'
+else
+ COND_DECODER_SPARC_TRUE='#'
+ COND_DECODER_SPARC_FALSE=
+fi
+
+
+# The so called "simple filters" share common code.
+enable_filter_simple=no
+enable_encoder_simple=no
+enable_decoder_simple=no
+test "x$enable_filter_x86" = xyes && enable_filter_simple=yes
+test "x$enable_encoder_x86" = xyes && enable_encoder_simple=yes
+test "x$enable_decoder_x86" = xyes && enable_decoder_simple=yes
+test "x$enable_filter_powerpc" = xyes && enable_filter_simple=yes
+test "x$enable_encoder_powerpc" = xyes && enable_encoder_simple=yes
+test "x$enable_decoder_powerpc" = xyes && enable_decoder_simple=yes
+test "x$enable_filter_ia64" = xyes && enable_filter_simple=yes
+test "x$enable_encoder_ia64" = xyes && enable_encoder_simple=yes
+test "x$enable_decoder_ia64" = xyes && enable_decoder_simple=yes
+test "x$enable_filter_arm" = xyes && enable_filter_simple=yes
+test "x$enable_encoder_arm" = xyes && enable_encoder_simple=yes
+test "x$enable_decoder_arm" = xyes && enable_decoder_simple=yes
+test "x$enable_filter_armthumb" = xyes && enable_filter_simple=yes
+test "x$enable_encoder_armthumb" = xyes && enable_encoder_simple=yes
+test "x$enable_decoder_armthumb" = xyes && enable_decoder_simple=yes
+test "x$enable_filter_sparc" = xyes && enable_filter_simple=yes
+test "x$enable_encoder_sparc" = xyes && enable_encoder_simple=yes
+test "x$enable_decoder_sparc" = xyes && enable_decoder_simple=yes
+ if test "x$enable_filter_simple" = xyes; then
+ COND_FILTER_SIMPLE_TRUE=
+ COND_FILTER_SIMPLE_FALSE='#'
+else
+ COND_FILTER_SIMPLE_TRUE='#'
+ COND_FILTER_SIMPLE_FALSE=
+fi
+
+ if test "x$enable_encoder_simple" = xyes; then
+ COND_ENCODER_SIMPLE_TRUE=
+ COND_ENCODER_SIMPLE_FALSE='#'
+else
+ COND_ENCODER_SIMPLE_TRUE='#'
+ COND_ENCODER_SIMPLE_FALSE=
+fi
+
+ if test "x$enable_decoder_simple" = xyes; then
+ COND_DECODER_SIMPLE_TRUE=
+ COND_DECODER_SIMPLE_FALSE='#'
+else
+ COND_DECODER_SIMPLE_TRUE='#'
+ COND_DECODER_SIMPLE_FALSE=
+fi
+
+
+# LZ-based filters share common code.
+enable_filter_lz=no
+enable_encoder_lz=no
+enable_decoder_lz=no
+test "x$enable_filter_lzma1" = xyes && enable_filter_lz=yes
+test "x$enable_encoder_lzma1" = xyes && enable_encoder_lz=yes
+test "x$enable_decoder_lzma1" = xyes && enable_decoder_lz=yes
+test "x$enable_filter_lzma2" = xyes && enable_filter_lz=yes
+test "x$enable_encoder_lzma2" = xyes && enable_encoder_lz=yes
+test "x$enable_decoder_lzma2" = xyes && enable_decoder_lz=yes
+ if test "x$enable_filter_lz" = xyes; then
+ COND_FILTER_LZ_TRUE=
+ COND_FILTER_LZ_FALSE='#'
+else
+ COND_FILTER_LZ_TRUE='#'
+ COND_FILTER_LZ_FALSE=
+fi
+
+ if test "x$enable_encoder_lz" = xyes; then
+ COND_ENCODER_LZ_TRUE=
+ COND_ENCODER_LZ_FALSE='#'
+else
+ COND_ENCODER_LZ_TRUE='#'
+ COND_ENCODER_LZ_FALSE=
+fi
+
+ if test "x$enable_decoder_lz" = xyes; then
+ COND_DECODER_LZ_TRUE=
+ COND_DECODER_LZ_FALSE='#'
+else
+ COND_DECODER_LZ_TRUE='#'
+ COND_DECODER_LZ_FALSE=
+fi
+
+
+
+#################
+# Match finders #
+#################
+
+
+
+enable_match_finder_hc3=no
+enable_match_finder_hc4=no
+enable_match_finder_bt2=no
+enable_match_finder_bt3=no
+enable_match_finder_bt4=no
+
+
+{ $as_echo "$as_me:${as_lineno-$LINENO}: checking which match finders to build" >&5
+$as_echo_n "checking which match finders to build... " >&6; }
+# Check whether --enable-match-finders was given.
+if test "${enable_match_finders+set}" = set; then :
+ enableval=$enable_match_finders;
+else
+ enable_match_finders=hc3,hc4,bt2,bt3,bt4
+fi
+
+enable_match_finders=`echo "$enable_match_finders" | sed 's/,/ /g'`
+if test "x$enable_encoder_lz" = xyes ; then
+ for arg in $enable_match_finders
+ do
+ case $arg in
+ hc3)
+ enable_match_finder_hc3=yes
+
+$as_echo "#define HAVE_MF_HC3 1" >>confdefs.h
+
+ ;;
+ hc4)
+ enable_match_finder_hc4=yes
+
+$as_echo "#define HAVE_MF_HC4 1" >>confdefs.h
+
+ ;;
+ bt2)
+ enable_match_finder_bt2=yes
+
+$as_echo "#define HAVE_MF_BT2 1" >>confdefs.h
+
+ ;;
+ bt3)
+ enable_match_finder_bt3=yes
+
+$as_echo "#define HAVE_MF_BT3 1" >>confdefs.h
+
+ ;;
+ bt4)
+ enable_match_finder_bt4=yes
+
+$as_echo "#define HAVE_MF_BT4 1" >>confdefs.h
+
+ ;;
+ *)
+ { $as_echo "$as_me:${as_lineno-$LINENO}: result: " >&5
+$as_echo "" >&6; }
+ as_fn_error "unknown match finder: $arg" "$LINENO" 5
+ ;;
+ esac
+ done
+ { $as_echo "$as_me:${as_lineno-$LINENO}: result: $enable_match_finders" >&5
+$as_echo "$enable_match_finders" >&6; }
+else
+ { $as_echo "$as_me:${as_lineno-$LINENO}: result: (none because not building any LZ-based encoder)" >&5
+$as_echo "(none because not building any LZ-based encoder)" >&6; }
+fi
+
+
+####################
+# Integrity checks #
+####################
+
+
+
+enable_check_lzma1=no
+enable_check_lzma2=no
+enable_check_subblock=no
+enable_check_delta=no
+enable_check_x86=no
+enable_check_powerpc=no
+enable_check_ia64=no
+enable_check_arm=no
+enable_check_armthumb=no
+enable_check_sparc=no
+
+{ $as_echo "$as_me:${as_lineno-$LINENO}: checking which integrity checks to build" >&5
+$as_echo_n "checking which integrity checks to build... " >&6; }
+# Check whether --enable-checks was given.
+if test "${enable_checks+set}" = set; then :
+ enableval=$enable_checks;
+else
+ enable_checks=crc32,crc64,sha256
+fi
+
+enable_checks=`echo "$enable_checks" | sed 's/,/ /g'`
+if test "x$enable_checks" = xno || test "x$enable_checks" = x; then
+ { $as_echo "$as_me:${as_lineno-$LINENO}: result: (none)" >&5
+$as_echo "(none)" >&6; }
+else
+ for arg in $enable_checks
+ do
+ case $arg in
+ crc32)
+ enable_check_crc32=yes
+
+$as_echo "#define HAVE_CHECK_CRC32 1" >>confdefs.h
+
+ ;;
+ crc64)
+ enable_check_crc64=yes
+
+$as_echo "#define HAVE_CHECK_CRC64 1" >>confdefs.h
+
+ ;;
+ sha256)
+ enable_check_sha256=yes
+
+$as_echo "#define HAVE_CHECK_SHA256 1" >>confdefs.h
+
+ ;;
+ *)
+ { $as_echo "$as_me:${as_lineno-$LINENO}: result: " >&5
+$as_echo "" >&6; }
+ as_fn_error "unknown integrity check: $arg" "$LINENO" 5
+ ;;
+ esac
+ done
+ { $as_echo "$as_me:${as_lineno-$LINENO}: result: $enable_checks" >&5
+$as_echo "$enable_checks" >&6; }
+fi
+if test "x$enable_checks_crc32" = xno ; then
+ as_fn_error "For now, the CRC32 check must always be enabled." "$LINENO" 5
+fi
+
+ if test "x$enable_check_crc32" = xyes; then
+ COND_CHECK_CRC32_TRUE=
+ COND_CHECK_CRC32_FALSE='#'
+else
+ COND_CHECK_CRC32_TRUE='#'
+ COND_CHECK_CRC32_FALSE=
+fi
+
+ if test "x$enable_check_crc64" = xyes; then
+ COND_CHECK_CRC64_TRUE=
+ COND_CHECK_CRC64_FALSE='#'
+else
+ COND_CHECK_CRC64_TRUE='#'
+ COND_CHECK_CRC64_FALSE=
+fi
+
+ if test "x$enable_check_sha256" = xyes; then
+ COND_CHECK_SHA256_TRUE=
+ COND_CHECK_SHA256_FALSE='#'
+else
+ COND_CHECK_SHA256_TRUE='#'
+ COND_CHECK_SHA256_FALSE=
+fi
+
+
+
+###########################
+# Assembler optimizations #
+###########################
+
+{ $as_echo "$as_me:${as_lineno-$LINENO}: checking if assembler optimizations should be used" >&5
+$as_echo_n "checking if assembler optimizations should be used... " >&6; }
+# Check whether --enable-assembler was given.
+if test "${enable_assembler+set}" = set; then :
+ enableval=$enable_assembler;
+else
+ enable_assembler=yes
+fi
+
+if test "x$enable_assembler" = xyes; then
+ case $host_cpu in
+ i?86) enable_assembler=x86 ;;
+ x86_64) enable_assembler=x86_64 ;;
+ *) enable_assembler=no ;;
+ esac
+fi
+case $enable_assembler in
+ x86)
+
+$as_echo "#define HAVE_ASM_X86 1" >>confdefs.h
+
+ ;;
+ x86_64)
+
+$as_echo "#define HAVE_ASM_X86_64 1" >>confdefs.h
+
+ ;;
+ no)
+ ;;
+ *)
+ { $as_echo "$as_me:${as_lineno-$LINENO}: result: " >&5
+$as_echo "" >&6; }
+ as_fn_error "--enable-assembler accepts only \`yes', \`no', \`x86', or \`x86_64'." "$LINENO" 5
+ ;;
+esac
+{ $as_echo "$as_me:${as_lineno-$LINENO}: result: $enable_assembler" >&5
+$as_echo "$enable_assembler" >&6; }
+ if test "x$enable_assembler" = xx86; then
+ COND_ASM_X86_TRUE=
+ COND_ASM_X86_FALSE='#'
+else
+ COND_ASM_X86_TRUE='#'
+ COND_ASM_X86_FALSE=
+fi
+
+ if test "x$enable_assembler" = xx86_64; then
+ COND_ASM_X86_64_TRUE=
+ COND_ASM_X86_64_FALSE='#'
+else
+ COND_ASM_X86_64_TRUE='#'
+ COND_ASM_X86_64_FALSE=
+fi
+
+
+
+################################
+# Fast unaligned memory access #
+################################
+
+{ $as_echo "$as_me:${as_lineno-$LINENO}: checking if unaligned memory access should be used" >&5
+$as_echo_n "checking if unaligned memory access should be used... " >&6; }
+# Check whether --enable-unaligned-access was given.
+if test "${enable_unaligned_access+set}" = set; then :
+ enableval=$enable_unaligned_access;
+else
+ enable_unaligned_access=auto
+fi
+
+if test "x$enable_unaligned_access" = xauto ; then
+ case $host_cpu in
+ i?86|x86_64|powerpc|powerpc64)
+ enable_unaligned_access=yes
+ ;;
+ *)
+ enable_unaligned_access=no
+ ;;
+ esac
+fi
+if test "x$enable_unaligned_access" = xyes ; then
+
+$as_echo "#define HAVE_FAST_UNALIGNED_ACCESS 1" >>confdefs.h
+
+ { $as_echo "$as_me:${as_lineno-$LINENO}: result: yes" >&5
+$as_echo "yes" >&6; }
+else
+ { $as_echo "$as_me:${as_lineno-$LINENO}: result: no" >&5
+$as_echo "no" >&6; }
+fi
+
+
+#####################
+# Size optimization #
+#####################
+
+{ $as_echo "$as_me:${as_lineno-$LINENO}: checking if small size is preferred over speed" >&5
+$as_echo_n "checking if small size is preferred over speed... " >&6; }
+# Check whether --enable-small was given.
+if test "${enable_small+set}" = set; then :
+ enableval=$enable_small;
+else
+ enable_small=no
+fi
+
+if test "x$enable_small" = xyes; then
+
+$as_echo "#define HAVE_SMALL 1" >>confdefs.h
+
+elif test "x$enable_small" != xno; then
+ { $as_echo "$as_me:${as_lineno-$LINENO}: result: " >&5
+$as_echo "" >&6; }
+ as_fn_error "--enable-small accepts only \`yes' or \`no'" "$LINENO" 5
+fi
+{ $as_echo "$as_me:${as_lineno-$LINENO}: result: $enable_small" >&5
+$as_echo "$enable_small" >&6; }
+ if test "x$enable_small" = xyes; then
+ COND_SMALL_TRUE=
+ COND_SMALL_FALSE='#'
+else
+ COND_SMALL_TRUE='#'
+ COND_SMALL_FALSE=
+fi
+
+
+
+#############
+# Threading #
+#############
+
+{ $as_echo "$as_me:${as_lineno-$LINENO}: checking if threading support is wanted" >&5
+$as_echo_n "checking if threading support is wanted... " >&6; }
+# Check whether --enable-threads was given.
+if test "${enable_threads+set}" = set; then :
+ enableval=$enable_threads;
+else
+ enable_threads=yes
+fi
+
+if test "x$enable_threads" != xyes && test "x$enable_threads" != xno; then
+ { $as_echo "$as_me:${as_lineno-$LINENO}: result: " >&5
+$as_echo "" >&6; }
+ as_fn_error "--enable-threads accepts only \`yes' or \`no'" "$LINENO" 5
+fi
+{ $as_echo "$as_me:${as_lineno-$LINENO}: result: $enable_threads" >&5
+$as_echo "$enable_threads" >&6; }
+# We use the actual result a little later.
+
+
+############################################
+# xz/xzdec/lzmadec linkage against liblzma #
+############################################
+
+# Link the xz, xzdec, and lzmadec command line tools against static liblzma
+# unless using --enable-dynamic. Using static liblzma gives a little bit
+# faster executable on x86, because no register is wasted for PIC. We also
+# have one dependency less, which allows users to more freely copy the xz
+# binary to other boxes. However, I wouldn't be surprised if distro
+# maintainers still prefer dynamic linking, so let's make it easy for them.
+
+{ $as_echo "$as_me:${as_lineno-$LINENO}: checking how programs should be linked against liblzma" >&5
+$as_echo_n "checking how programs should be linked against liblzma... " >&6; }
+# Check whether --enable-dynamic was given.
+if test "${enable_dynamic+set}" = set; then :
+ enableval=$enable_dynamic;
+else
+ enable_dynamic=mixed
+fi
+
+case $enable_dynamic in
+ mixed)
+ { $as_echo "$as_me:${as_lineno-$LINENO}: result: mixed (some dynamically, some statically)" >&5
+$as_echo "mixed (some dynamically, some statically)" >&6; }
+ ;;
+ yes)
+ { $as_echo "$as_me:${as_lineno-$LINENO}: result: dynamically" >&5
+$as_echo "dynamically" >&6; }
+ ;;
+ no)
+ { $as_echo "$as_me:${as_lineno-$LINENO}: result: statically" >&5
+$as_echo "statically" >&6; }
+ ;;
+ *)
+ { $as_echo "$as_me:${as_lineno-$LINENO}: result: " >&5
+$as_echo "" >&6; }
+ as_fn_error "--enable-dynamic accepts only \`mixed', \`yes', or \`no'" "$LINENO" 5
+ ;;
+esac
+# We use the actual results later, because we don't know yet
+# if --disable-shared or --disable-static was used.
+
+
+###############################################################################
+# Checks for programs.
+###############################################################################
+
+echo
+
+ { $as_echo "$as_me:${as_lineno-$LINENO}: checking for a shell that conforms to POSIX" >&5
+$as_echo_n "checking for a shell that conforms to POSIX... " >&6; }
+if test "${gl_cv_posix_shell+set}" = set; then :
+ $as_echo_n "(cached) " >&6
+else
+ gl_test_posix_shell_script='
+ func_return () {
+ (exit $1)
+ }
+ func_success () {
+ func_return 0
+ }
+ func_failure () {
+ func_return 1
+ }
+ func_ret_success () {
+ return 0
+ }
+ func_ret_failure () {
+ return 1
+ }
+ subshell_umask_sanity () {
+ (umask 22; (umask 0); test $(umask) -eq 22)
+ }
+ test "$(echo foo)" = foo &&
+ func_success &&
+ ! func_failure &&
+ func_ret_success &&
+ ! func_ret_failure &&
+ (set x && func_ret_success y && test x = "$1") &&
+ subshell_umask_sanity
+ '
+ for gl_cv_posix_shell in \
+ "$CONFIG_SHELL" "$SHELL" /bin/sh /bin/bash /bin/ksh /bin/sh5 no; do
+ case $gl_cv_posix_shell in
+ /*)
+ "$gl_cv_posix_shell" -c "$gl_test_posix_shell_script" 2>/dev/null \
+ && break;;
+ esac
+ done
+fi
+{ $as_echo "$as_me:${as_lineno-$LINENO}: result: $gl_cv_posix_shell" >&5
+$as_echo "$gl_cv_posix_shell" >&6; }
+
+ if test "$gl_cv_posix_shell" != no; then
+ POSIX_SHELL=$gl_cv_posix_shell
+ PREFERABLY_POSIX_SHELL=$POSIX_SHELL
+ else
+ POSIX_SHELL=
+ PREFERABLY_POSIX_SHELL=/bin/sh
+ fi
+
+
+
+if test -z "$POSIX_SHELL" ; then
+ as_fn_error "No POSIX conforming shell (sh) was found." "$LINENO" 5
+fi
+
+echo
+echo "Initializing Automake:"
+
+am__api_version='1.11'
+
+# Find a good install program. We prefer a C program (faster),
+# so one script is as good as another. But avoid the broken or
+# incompatible versions:
+# SysV /etc/install, /usr/sbin/install
+# SunOS /usr/etc/install
+# IRIX /sbin/install
+# AIX /bin/install
+# AmigaOS /C/install, which installs bootblocks on floppy discs
+# AIX 4 /usr/bin/installbsd, which doesn't work without a -g flag
+# AFS /usr/afsws/bin/install, which mishandles nonexistent args
+# SVR4 /usr/ucb/install, which tries to use the nonexistent group "staff"
+# OS/2's system install, which has a completely different semantic
+# ./install, which can be erroneously created by make from ./install.sh.
+# Reject install programs that cannot install multiple files.
+{ $as_echo "$as_me:${as_lineno-$LINENO}: checking for a BSD-compatible install" >&5
+$as_echo_n "checking for a BSD-compatible install... " >&6; }
+if test -z "$INSTALL"; then
+if test "${ac_cv_path_install+set}" = set; then :
+ $as_echo_n "(cached) " >&6
+else
+ as_save_IFS=$IFS; IFS=$PATH_SEPARATOR
+for as_dir in $PATH
+do
+ IFS=$as_save_IFS
+ test -z "$as_dir" && as_dir=.
+ # Account for people who put trailing slashes in PATH elements.
+case $as_dir/ in #((
+ ./ | .// | /[cC]/* | \
+ /etc/* | /usr/sbin/* | /usr/etc/* | /sbin/* | /usr/afsws/bin/* | \
+ ?:[\\/]os2[\\/]install[\\/]* | ?:[\\/]OS2[\\/]INSTALL[\\/]* | \
+ /usr/ucb/* ) ;;
+ *)
+ # OSF1 and SCO ODT 3.0 have their own names for install.
+ # Don't use installbsd from OSF since it installs stuff as root
+ # by default.
+ for ac_prog in ginstall scoinst install; do
+ for ac_exec_ext in '' $ac_executable_extensions; do
+ if { test -f "$as_dir/$ac_prog$ac_exec_ext" && $as_test_x "$as_dir/$ac_prog$ac_exec_ext"; }; then
+ if test $ac_prog = install &&
+ grep dspmsg "$as_dir/$ac_prog$ac_exec_ext" >/dev/null 2>&1; then
+ # AIX install. It has an incompatible calling convention.
+ :
+ elif test $ac_prog = install &&
+ grep pwplus "$as_dir/$ac_prog$ac_exec_ext" >/dev/null 2>&1; then
+ # program-specific install script used by HP pwplus--don't use.
+ :
+ else
+ rm -rf conftest.one conftest.two conftest.dir
+ echo one > conftest.one
+ echo two > conftest.two
+ mkdir conftest.dir
+ if "$as_dir/$ac_prog$ac_exec_ext" -c conftest.one conftest.two "`pwd`/conftest.dir" &&
+ test -s conftest.one && test -s conftest.two &&
+ test -s conftest.dir/conftest.one &&
+ test -s conftest.dir/conftest.two
+ then
+ ac_cv_path_install="$as_dir/$ac_prog$ac_exec_ext -c"
+ break 3
+ fi
+ fi
+ fi
+ done
+ done
+ ;;
+esac
+
+ done
+IFS=$as_save_IFS
+
+rm -rf conftest.one conftest.two conftest.dir
+
+fi
+ if test "${ac_cv_path_install+set}" = set; then
+ INSTALL=$ac_cv_path_install
+ else
+ # As a last resort, use the slow shell script. Don't cache a
+ # value for INSTALL within a source directory, because that will
+ # break other packages using the cache if that directory is
+ # removed, or if the value is a relative name.
+ INSTALL=$ac_install_sh
+ fi
+fi
+{ $as_echo "$as_me:${as_lineno-$LINENO}: result: $INSTALL" >&5
+$as_echo "$INSTALL" >&6; }
+
+# Use test -z because SunOS4 sh mishandles braces in ${var-val}.
+# It thinks the first close brace ends the variable substitution.
+test -z "$INSTALL_PROGRAM" && INSTALL_PROGRAM='${INSTALL}'
+
+test -z "$INSTALL_SCRIPT" && INSTALL_SCRIPT='${INSTALL}'
+
+test -z "$INSTALL_DATA" && INSTALL_DATA='${INSTALL} -m 644'
+
+{ $as_echo "$as_me:${as_lineno-$LINENO}: checking whether build environment is sane" >&5
+$as_echo_n "checking whether build environment is sane... " >&6; }
+# Just in case
+sleep 1
+echo timestamp > conftest.file
+# Reject unsafe characters in $srcdir or the absolute working directory
+# name. Accept space and tab only in the latter.
+am_lf='
+'
+case `pwd` in
+ *[\\\"\#\$\&\'\`$am_lf]*)
+ as_fn_error "unsafe absolute working directory name" "$LINENO" 5;;
+esac
+case $srcdir in
+ *[\\\"\#\$\&\'\`$am_lf\ \ ]*)
+ as_fn_error "unsafe srcdir value: \`$srcdir'" "$LINENO" 5;;
+esac
+
+# Do `set' in a subshell so we don't clobber the current shell's
+# arguments. Must try -L first in case configure is actually a
+# symlink; some systems play weird games with the mod time of symlinks
+# (eg FreeBSD returns the mod time of the symlink's containing
+# directory).
+if (
+ set X `ls -Lt "$srcdir/configure" conftest.file 2> /dev/null`
+ if test "$*" = "X"; then
+ # -L didn't work.
+ set X `ls -t "$srcdir/configure" conftest.file`
+ fi
+ rm -f conftest.file
+ if test "$*" != "X $srcdir/configure conftest.file" \
+ && test "$*" != "X conftest.file $srcdir/configure"; then
+
+ # If neither matched, then we have a broken ls. This can happen
+ # if, for instance, CONFIG_SHELL is bash and it inherits a
+ # broken ls alias from the environment. This has actually
+ # happened. Such a system could not be considered "sane".
+ as_fn_error "ls -t appears to fail. Make sure there is not a broken
+alias in your environment" "$LINENO" 5
+ fi
+
+ test "$2" = conftest.file
+ )
+then
+ # Ok.
+ :
+else
+ as_fn_error "newly created file is older than distributed files!
+Check your system clock" "$LINENO" 5
+fi
+{ $as_echo "$as_me:${as_lineno-$LINENO}: result: yes" >&5
+$as_echo "yes" >&6; }
+test "$program_prefix" != NONE &&
+ program_transform_name="s&^&$program_prefix&;$program_transform_name"
+# Use a double $ so make ignores it.
+test "$program_suffix" != NONE &&
+ program_transform_name="s&\$&$program_suffix&;$program_transform_name"
+# Double any \ or $.
+# By default was `s,x,x', remove it if useless.
+ac_script='s/[\\$]/&&/g;s/;s,x,x,$//'
+program_transform_name=`$as_echo "$program_transform_name" | sed "$ac_script"`
+
+# expand $ac_aux_dir to an absolute path
+am_aux_dir=`cd $ac_aux_dir && pwd`
+
+if test x"${MISSING+set}" != xset; then
+ case $am_aux_dir in
+ *\ * | *\ *)
+ MISSING="\${SHELL} \"$am_aux_dir/missing\"" ;;
+ *)
+ MISSING="\${SHELL} $am_aux_dir/missing" ;;
+ esac
+fi
+# Use eval to expand $SHELL
+if eval "$MISSING --run true"; then
+ am_missing_run="$MISSING --run "
+else
+ am_missing_run=
+ { $as_echo "$as_me:${as_lineno-$LINENO}: WARNING: \`missing' script is too old or missing" >&5
+$as_echo "$as_me: WARNING: \`missing' script is too old or missing" >&2;}
+fi
+
+if test x"${install_sh}" != xset; then
+ case $am_aux_dir in
+ *\ * | *\ *)
+ install_sh="\${SHELL} '$am_aux_dir/install-sh'" ;;
+ *)
+ install_sh="\${SHELL} $am_aux_dir/install-sh"
+ esac
+fi
+
+# Installed binaries are usually stripped using `strip' when the user
+# run `make install-strip'. However `strip' might not be the right
+# tool to use in cross-compilation environments, therefore Automake
+# will honor the `STRIP' environment variable to overrule this program.
+if test "$cross_compiling" != no; then
+ if test -n "$ac_tool_prefix"; then
+ # Extract the first word of "${ac_tool_prefix}strip", so it can be a program name with args.
+set dummy ${ac_tool_prefix}strip; ac_word=$2
+{ $as_echo "$as_me:${as_lineno-$LINENO}: checking for $ac_word" >&5
+$as_echo_n "checking for $ac_word... " >&6; }
+if test "${ac_cv_prog_STRIP+set}" = set; then :
+ $as_echo_n "(cached) " >&6
+else
+ if test -n "$STRIP"; then
+ ac_cv_prog_STRIP="$STRIP" # Let the user override the test.
+else
+as_save_IFS=$IFS; IFS=$PATH_SEPARATOR
+for as_dir in $PATH
+do
+ IFS=$as_save_IFS
+ test -z "$as_dir" && as_dir=.
+ for ac_exec_ext in '' $ac_executable_extensions; do
+ if { test -f "$as_dir/$ac_word$ac_exec_ext" && $as_test_x "$as_dir/$ac_word$ac_exec_ext"; }; then
+ ac_cv_prog_STRIP="${ac_tool_prefix}strip"
+ $as_echo "$as_me:${as_lineno-$LINENO}: found $as_dir/$ac_word$ac_exec_ext" >&5
+ break 2
+ fi
+done
+ done
+IFS=$as_save_IFS
+
+fi
+fi
+STRIP=$ac_cv_prog_STRIP
+if test -n "$STRIP"; then
+ { $as_echo "$as_me:${as_lineno-$LINENO}: result: $STRIP" >&5
+$as_echo "$STRIP" >&6; }
+else
+ { $as_echo "$as_me:${as_lineno-$LINENO}: result: no" >&5
+$as_echo "no" >&6; }
+fi
+
+
+fi
+if test -z "$ac_cv_prog_STRIP"; then
+ ac_ct_STRIP=$STRIP
+ # Extract the first word of "strip", so it can be a program name with args.
+set dummy strip; ac_word=$2
+{ $as_echo "$as_me:${as_lineno-$LINENO}: checking for $ac_word" >&5
+$as_echo_n "checking for $ac_word... " >&6; }
+if test "${ac_cv_prog_ac_ct_STRIP+set}" = set; then :
+ $as_echo_n "(cached) " >&6
+else
+ if test -n "$ac_ct_STRIP"; then
+ ac_cv_prog_ac_ct_STRIP="$ac_ct_STRIP" # Let the user override the test.
+else
+as_save_IFS=$IFS; IFS=$PATH_SEPARATOR
+for as_dir in $PATH
+do
+ IFS=$as_save_IFS
+ test -z "$as_dir" && as_dir=.
+ for ac_exec_ext in '' $ac_executable_extensions; do
+ if { test -f "$as_dir/$ac_word$ac_exec_ext" && $as_test_x "$as_dir/$ac_word$ac_exec_ext"; }; then
+ ac_cv_prog_ac_ct_STRIP="strip"
+ $as_echo "$as_me:${as_lineno-$LINENO}: found $as_dir/$ac_word$ac_exec_ext" >&5
+ break 2
+ fi
+done
+ done
+IFS=$as_save_IFS
+
+fi
+fi
+ac_ct_STRIP=$ac_cv_prog_ac_ct_STRIP
+if test -n "$ac_ct_STRIP"; then
+ { $as_echo "$as_me:${as_lineno-$LINENO}: result: $ac_ct_STRIP" >&5
+$as_echo "$ac_ct_STRIP" >&6; }
+else
+ { $as_echo "$as_me:${as_lineno-$LINENO}: result: no" >&5
+$as_echo "no" >&6; }
+fi
+
+ if test "x$ac_ct_STRIP" = x; then
+ STRIP=":"
+ else
+ case $cross_compiling:$ac_tool_warned in
+yes:)
+{ $as_echo "$as_me:${as_lineno-$LINENO}: WARNING: using cross tools not prefixed with host triplet" >&5
+$as_echo "$as_me: WARNING: using cross tools not prefixed with host triplet" >&2;}
+ac_tool_warned=yes ;;
+esac
+ STRIP=$ac_ct_STRIP
+ fi
+else
+ STRIP="$ac_cv_prog_STRIP"
+fi
+
+fi
+INSTALL_STRIP_PROGRAM="\$(install_sh) -c -s"
+
+{ $as_echo "$as_me:${as_lineno-$LINENO}: checking for a thread-safe mkdir -p" >&5
+$as_echo_n "checking for a thread-safe mkdir -p... " >&6; }
+if test -z "$MKDIR_P"; then
+ if test "${ac_cv_path_mkdir+set}" = set; then :
+ $as_echo_n "(cached) " >&6
+else
+ as_save_IFS=$IFS; IFS=$PATH_SEPARATOR
+for as_dir in $PATH$PATH_SEPARATOR/opt/sfw/bin
+do
+ IFS=$as_save_IFS
+ test -z "$as_dir" && as_dir=.
+ for ac_prog in mkdir gmkdir; do
+ for ac_exec_ext in '' $ac_executable_extensions; do
+ { test -f "$as_dir/$ac_prog$ac_exec_ext" && $as_test_x "$as_dir/$ac_prog$ac_exec_ext"; } || continue
+ case `"$as_dir/$ac_prog$ac_exec_ext" --version 2>&1` in #(
+ 'mkdir (GNU coreutils) '* | \
+ 'mkdir (coreutils) '* | \
+ 'mkdir (fileutils) '4.1*)
+ ac_cv_path_mkdir=$as_dir/$ac_prog$ac_exec_ext
+ break 3;;
+ esac
+ done
+ done
+ done
+IFS=$as_save_IFS
+
+fi
+
+ if test "${ac_cv_path_mkdir+set}" = set; then
+ MKDIR_P="$ac_cv_path_mkdir -p"
+ else
+ # As a last resort, use the slow shell script. Don't cache a
+ # value for MKDIR_P within a source directory, because that will
+ # break other packages using the cache if that directory is
+ # removed, or if the value is a relative name.
+ test -d ./--version && rmdir ./--version
+ MKDIR_P="$ac_install_sh -d"
+ fi
+fi
+{ $as_echo "$as_me:${as_lineno-$LINENO}: result: $MKDIR_P" >&5
+$as_echo "$MKDIR_P" >&6; }
+
+mkdir_p="$MKDIR_P"
+case $mkdir_p in
+ [\\/$]* | ?:[\\/]*) ;;
+ */*) mkdir_p="\$(top_builddir)/$mkdir_p" ;;
+esac
+
+for ac_prog in gawk mawk nawk awk
+do
+ # Extract the first word of "$ac_prog", so it can be a program name with args.
+set dummy $ac_prog; ac_word=$2
+{ $as_echo "$as_me:${as_lineno-$LINENO}: checking for $ac_word" >&5
+$as_echo_n "checking for $ac_word... " >&6; }
+if test "${ac_cv_prog_AWK+set}" = set; then :
+ $as_echo_n "(cached) " >&6
+else
+ if test -n "$AWK"; then
+ ac_cv_prog_AWK="$AWK" # Let the user override the test.
+else
+as_save_IFS=$IFS; IFS=$PATH_SEPARATOR
+for as_dir in $PATH
+do
+ IFS=$as_save_IFS
+ test -z "$as_dir" && as_dir=.
+ for ac_exec_ext in '' $ac_executable_extensions; do
+ if { test -f "$as_dir/$ac_word$ac_exec_ext" && $as_test_x "$as_dir/$ac_word$ac_exec_ext"; }; then
+ ac_cv_prog_AWK="$ac_prog"
+ $as_echo "$as_me:${as_lineno-$LINENO}: found $as_dir/$ac_word$ac_exec_ext" >&5
+ break 2
+ fi
+done
+ done
+IFS=$as_save_IFS
+
+fi
+fi
+AWK=$ac_cv_prog_AWK
+if test -n "$AWK"; then
+ { $as_echo "$as_me:${as_lineno-$LINENO}: result: $AWK" >&5
+$as_echo "$AWK" >&6; }
+else
+ { $as_echo "$as_me:${as_lineno-$LINENO}: result: no" >&5
+$as_echo "no" >&6; }
+fi
+
+
+ test -n "$AWK" && break
+done
+
+{ $as_echo "$as_me:${as_lineno-$LINENO}: checking whether ${MAKE-make} sets \$(MAKE)" >&5
+$as_echo_n "checking whether ${MAKE-make} sets \$(MAKE)... " >&6; }
+set x ${MAKE-make}
+ac_make=`$as_echo "$2" | sed 's/+/p/g; s/[^a-zA-Z0-9_]/_/g'`
+if { as_var=ac_cv_prog_make_${ac_make}_set; eval "test \"\${$as_var+set}\" = set"; }; then :
+ $as_echo_n "(cached) " >&6
+else
+ cat >conftest.make <<\_ACEOF
+SHELL = /bin/sh
+all:
+ @echo '@@@%%%=$(MAKE)=@@@%%%'
+_ACEOF
+# GNU make sometimes prints "make[1]: Entering...", which would confuse us.
+case `${MAKE-make} -f conftest.make 2>/dev/null` in
+ *@@@%%%=?*=@@@%%%*)
+ eval ac_cv_prog_make_${ac_make}_set=yes;;
+ *)
+ eval ac_cv_prog_make_${ac_make}_set=no;;
+esac
+rm -f conftest.make
+fi
+if eval test \$ac_cv_prog_make_${ac_make}_set = yes; then
+ { $as_echo "$as_me:${as_lineno-$LINENO}: result: yes" >&5
+$as_echo "yes" >&6; }
+ SET_MAKE=
+else
+ { $as_echo "$as_me:${as_lineno-$LINENO}: result: no" >&5
+$as_echo "no" >&6; }
+ SET_MAKE="MAKE=${MAKE-make}"
+fi
+
+rm -rf .tst 2>/dev/null
+mkdir .tst 2>/dev/null
+if test -d .tst; then
+ am__leading_dot=.
+else
+ am__leading_dot=_
+fi
+rmdir .tst 2>/dev/null
+
+if test "`cd $srcdir && pwd`" != "`pwd`"; then
+ # Use -I$(srcdir) only when $(srcdir) != ., so that make's output
+ # is not polluted with repeated "-I."
+ am__isrc=' -I$(srcdir)'
+ # test to see if srcdir already configured
+ if test -f $srcdir/config.status; then
+ as_fn_error "source directory already configured; run \"make distclean\" there first" "$LINENO" 5
+ fi
+fi
+
+# test whether we have cygpath
+if test -z "$CYGPATH_W"; then
+ if (cygpath --version) >/dev/null 2>/dev/null; then
+ CYGPATH_W='cygpath -w'
+ else
+ CYGPATH_W=echo
+ fi
+fi
+
+
+# Define the identity of the package.
+ PACKAGE='xz'
+ VERSION='4.999.9beta'
+
+
+cat >>confdefs.h <<_ACEOF
+#define PACKAGE "$PACKAGE"
+_ACEOF
+
+
+cat >>confdefs.h <<_ACEOF
+#define VERSION "$VERSION"
+_ACEOF
+
+# Some tools Automake needs.
+
+ACLOCAL=${ACLOCAL-"${am_missing_run}aclocal-${am__api_version}"}
+
+
+AUTOCONF=${AUTOCONF-"${am_missing_run}autoconf"}
+
+
+AUTOMAKE=${AUTOMAKE-"${am_missing_run}automake-${am__api_version}"}
+
+
+AUTOHEADER=${AUTOHEADER-"${am_missing_run}autoheader"}
+
+
+MAKEINFO=${MAKEINFO-"${am_missing_run}makeinfo"}
+
+# We need awk for the "check" target. The system "awk" is bad on
+# some platforms.
+# Always define AMTAR for backward compatibility.
+
+AMTAR=${AMTAR-"${am_missing_run}tar"}
+
+am__tar='${AMTAR} chof - "$$tardir"'; am__untar='${AMTAR} xf -'
+
+
+
+
+
+{ $as_echo "$as_me:${as_lineno-$LINENO}: checking whether ln -s works" >&5
+$as_echo_n "checking whether ln -s works... " >&6; }
+LN_S=$as_ln_s
+if test "$LN_S" = "ln -s"; then
+ { $as_echo "$as_me:${as_lineno-$LINENO}: result: yes" >&5
+$as_echo "yes" >&6; }
+else
+ { $as_echo "$as_me:${as_lineno-$LINENO}: result: no, using $LN_S" >&5
+$as_echo "no, using $LN_S" >&6; }
+fi
+
+
+DEPDIR="${am__leading_dot}deps"
+
+ac_config_commands="$ac_config_commands depfiles"
+
+
+am_make=${MAKE-make}
+cat > confinc << 'END'
+am__doit:
+ @echo this is the am__doit target
+.PHONY: am__doit
+END
+# If we don't find an include directive, just comment out the code.
+{ $as_echo "$as_me:${as_lineno-$LINENO}: checking for style of include used by $am_make" >&5
+$as_echo_n "checking for style of include used by $am_make... " >&6; }
+am__include="#"
+am__quote=
+_am_result=none
+# First try GNU make style include.
+echo "include confinc" > confmf
+# Ignore all kinds of additional output from `make'.
+case `$am_make -s -f confmf 2> /dev/null` in #(
+*the\ am__doit\ target*)
+ am__include=include
+ am__quote=
+ _am_result=GNU
+ ;;
+esac
+# Now try BSD make style include.
+if test "$am__include" = "#"; then
+ echo '.include "confinc"' > confmf
+ case `$am_make -s -f confmf 2> /dev/null` in #(
+ *the\ am__doit\ target*)
+ am__include=.include
+ am__quote="\""
+ _am_result=BSD
+ ;;
+ esac
+fi
+
+
+{ $as_echo "$as_me:${as_lineno-$LINENO}: result: $_am_result" >&5
+$as_echo "$_am_result" >&6; }
+rm -f confinc confmf
+
+# Check whether --enable-dependency-tracking was given.
+if test "${enable_dependency_tracking+set}" = set; then :
+ enableval=$enable_dependency_tracking;
+fi
+
+if test "x$enable_dependency_tracking" != xno; then
+ am_depcomp="$ac_aux_dir/depcomp"
+ AMDEPBACKSLASH='\'
+fi
+ if test "x$enable_dependency_tracking" != xno; then
+ AMDEP_TRUE=
+ AMDEP_FALSE='#'
+else
+ AMDEP_TRUE='#'
+ AMDEP_FALSE=
+fi
+
+
+ac_ext=c
+ac_cpp='$CPP $CPPFLAGS'
+ac_compile='$CC -c $CFLAGS $CPPFLAGS conftest.$ac_ext >&5'
+ac_link='$CC -o conftest$ac_exeext $CFLAGS $CPPFLAGS $LDFLAGS conftest.$ac_ext $LIBS >&5'
+ac_compiler_gnu=$ac_cv_c_compiler_gnu
+if test -n "$ac_tool_prefix"; then
+ # Extract the first word of "${ac_tool_prefix}gcc", so it can be a program name with args.
+set dummy ${ac_tool_prefix}gcc; ac_word=$2
+{ $as_echo "$as_me:${as_lineno-$LINENO}: checking for $ac_word" >&5
+$as_echo_n "checking for $ac_word... " >&6; }
+if test "${ac_cv_prog_CC+set}" = set; then :
+ $as_echo_n "(cached) " >&6
+else
+ if test -n "$CC"; then
+ ac_cv_prog_CC="$CC" # Let the user override the test.
+else
+as_save_IFS=$IFS; IFS=$PATH_SEPARATOR
+for as_dir in $PATH
+do
+ IFS=$as_save_IFS
+ test -z "$as_dir" && as_dir=.
+ for ac_exec_ext in '' $ac_executable_extensions; do
+ if { test -f "$as_dir/$ac_word$ac_exec_ext" && $as_test_x "$as_dir/$ac_word$ac_exec_ext"; }; then
+ ac_cv_prog_CC="${ac_tool_prefix}gcc"
+ $as_echo "$as_me:${as_lineno-$LINENO}: found $as_dir/$ac_word$ac_exec_ext" >&5
+ break 2
+ fi
+done
+ done
+IFS=$as_save_IFS
+
+fi
+fi
+CC=$ac_cv_prog_CC
+if test -n "$CC"; then
+ { $as_echo "$as_me:${as_lineno-$LINENO}: result: $CC" >&5
+$as_echo "$CC" >&6; }
+else
+ { $as_echo "$as_me:${as_lineno-$LINENO}: result: no" >&5
+$as_echo "no" >&6; }
+fi
+
+
+fi
+if test -z "$ac_cv_prog_CC"; then
+ ac_ct_CC=$CC
+ # Extract the first word of "gcc", so it can be a program name with args.
+set dummy gcc; ac_word=$2
+{ $as_echo "$as_me:${as_lineno-$LINENO}: checking for $ac_word" >&5
+$as_echo_n "checking for $ac_word... " >&6; }
+if test "${ac_cv_prog_ac_ct_CC+set}" = set; then :
+ $as_echo_n "(cached) " >&6
+else
+ if test -n "$ac_ct_CC"; then
+ ac_cv_prog_ac_ct_CC="$ac_ct_CC" # Let the user override the test.
+else
+as_save_IFS=$IFS; IFS=$PATH_SEPARATOR
+for as_dir in $PATH
+do
+ IFS=$as_save_IFS
+ test -z "$as_dir" && as_dir=.
+ for ac_exec_ext in '' $ac_executable_extensions; do
+ if { test -f "$as_dir/$ac_word$ac_exec_ext" && $as_test_x "$as_dir/$ac_word$ac_exec_ext"; }; then
+ ac_cv_prog_ac_ct_CC="gcc"
+ $as_echo "$as_me:${as_lineno-$LINENO}: found $as_dir/$ac_word$ac_exec_ext" >&5
+ break 2
+ fi
+done
+ done
+IFS=$as_save_IFS
+
+fi
+fi
+ac_ct_CC=$ac_cv_prog_ac_ct_CC
+if test -n "$ac_ct_CC"; then
+ { $as_echo "$as_me:${as_lineno-$LINENO}: result: $ac_ct_CC" >&5
+$as_echo "$ac_ct_CC" >&6; }
+else
+ { $as_echo "$as_me:${as_lineno-$LINENO}: result: no" >&5
+$as_echo "no" >&6; }
+fi
+
+ if test "x$ac_ct_CC" = x; then
+ CC=""
+ else
+ case $cross_compiling:$ac_tool_warned in
+yes:)
+{ $as_echo "$as_me:${as_lineno-$LINENO}: WARNING: using cross tools not prefixed with host triplet" >&5
+$as_echo "$as_me: WARNING: using cross tools not prefixed with host triplet" >&2;}
+ac_tool_warned=yes ;;
+esac
+ CC=$ac_ct_CC
+ fi
+else
+ CC="$ac_cv_prog_CC"
+fi
+
+if test -z "$CC"; then
+ if test -n "$ac_tool_prefix"; then
+ # Extract the first word of "${ac_tool_prefix}cc", so it can be a program name with args.
+set dummy ${ac_tool_prefix}cc; ac_word=$2
+{ $as_echo "$as_me:${as_lineno-$LINENO}: checking for $ac_word" >&5
+$as_echo_n "checking for $ac_word... " >&6; }
+if test "${ac_cv_prog_CC+set}" = set; then :
+ $as_echo_n "(cached) " >&6
+else
+ if test -n "$CC"; then
+ ac_cv_prog_CC="$CC" # Let the user override the test.
+else
+as_save_IFS=$IFS; IFS=$PATH_SEPARATOR
+for as_dir in $PATH
+do
+ IFS=$as_save_IFS
+ test -z "$as_dir" && as_dir=.
+ for ac_exec_ext in '' $ac_executable_extensions; do
+ if { test -f "$as_dir/$ac_word$ac_exec_ext" && $as_test_x "$as_dir/$ac_word$ac_exec_ext"; }; then
+ ac_cv_prog_CC="${ac_tool_prefix}cc"
+ $as_echo "$as_me:${as_lineno-$LINENO}: found $as_dir/$ac_word$ac_exec_ext" >&5
+ break 2
+ fi
+done
+ done
+IFS=$as_save_IFS
+
+fi
+fi
+CC=$ac_cv_prog_CC
+if test -n "$CC"; then
+ { $as_echo "$as_me:${as_lineno-$LINENO}: result: $CC" >&5
+$as_echo "$CC" >&6; }
+else
+ { $as_echo "$as_me:${as_lineno-$LINENO}: result: no" >&5
+$as_echo "no" >&6; }
+fi
+
+
+ fi
+fi
+if test -z "$CC"; then
+ # Extract the first word of "cc", so it can be a program name with args.
+set dummy cc; ac_word=$2
+{ $as_echo "$as_me:${as_lineno-$LINENO}: checking for $ac_word" >&5
+$as_echo_n "checking for $ac_word... " >&6; }
+if test "${ac_cv_prog_CC+set}" = set; then :
+ $as_echo_n "(cached) " >&6
+else
+ if test -n "$CC"; then
+ ac_cv_prog_CC="$CC" # Let the user override the test.
+else
+ ac_prog_rejected=no
+as_save_IFS=$IFS; IFS=$PATH_SEPARATOR
+for as_dir in $PATH
+do
+ IFS=$as_save_IFS
+ test -z "$as_dir" && as_dir=.
+ for ac_exec_ext in '' $ac_executable_extensions; do
+ if { test -f "$as_dir/$ac_word$ac_exec_ext" && $as_test_x "$as_dir/$ac_word$ac_exec_ext"; }; then
+ if test "$as_dir/$ac_word$ac_exec_ext" = "/usr/ucb/cc"; then
+ ac_prog_rejected=yes
+ continue
+ fi
+ ac_cv_prog_CC="cc"
+ $as_echo "$as_me:${as_lineno-$LINENO}: found $as_dir/$ac_word$ac_exec_ext" >&5
+ break 2
+ fi
+done
+ done
+IFS=$as_save_IFS
+
+if test $ac_prog_rejected = yes; then
+ # We found a bogon in the path, so make sure we never use it.
+ set dummy $ac_cv_prog_CC
+ shift
+ if test $# != 0; then
+ # We chose a different compiler from the bogus one.
+ # However, it has the same basename, so the bogon will be chosen
+ # first if we set CC to just the basename; use the full file name.
+ shift
+ ac_cv_prog_CC="$as_dir/$ac_word${1+' '}$@"
+ fi
+fi
+fi
+fi
+CC=$ac_cv_prog_CC
+if test -n "$CC"; then
+ { $as_echo "$as_me:${as_lineno-$LINENO}: result: $CC" >&5
+$as_echo "$CC" >&6; }
+else
+ { $as_echo "$as_me:${as_lineno-$LINENO}: result: no" >&5
+$as_echo "no" >&6; }
+fi
+
+
+fi
+if test -z "$CC"; then
+ if test -n "$ac_tool_prefix"; then
+ for ac_prog in cl.exe
+ do
+ # Extract the first word of "$ac_tool_prefix$ac_prog", so it can be a program name with args.
+set dummy $ac_tool_prefix$ac_prog; ac_word=$2
+{ $as_echo "$as_me:${as_lineno-$LINENO}: checking for $ac_word" >&5
+$as_echo_n "checking for $ac_word... " >&6; }
+if test "${ac_cv_prog_CC+set}" = set; then :
+ $as_echo_n "(cached) " >&6
+else
+ if test -n "$CC"; then
+ ac_cv_prog_CC="$CC" # Let the user override the test.
+else
+as_save_IFS=$IFS; IFS=$PATH_SEPARATOR
+for as_dir in $PATH
+do
+ IFS=$as_save_IFS
+ test -z "$as_dir" && as_dir=.
+ for ac_exec_ext in '' $ac_executable_extensions; do
+ if { test -f "$as_dir/$ac_word$ac_exec_ext" && $as_test_x "$as_dir/$ac_word$ac_exec_ext"; }; then
+ ac_cv_prog_CC="$ac_tool_prefix$ac_prog"
+ $as_echo "$as_me:${as_lineno-$LINENO}: found $as_dir/$ac_word$ac_exec_ext" >&5
+ break 2
+ fi
+done
+ done
+IFS=$as_save_IFS
+
+fi
+fi
+CC=$ac_cv_prog_CC
+if test -n "$CC"; then
+ { $as_echo "$as_me:${as_lineno-$LINENO}: result: $CC" >&5
+$as_echo "$CC" >&6; }
+else
+ { $as_echo "$as_me:${as_lineno-$LINENO}: result: no" >&5
+$as_echo "no" >&6; }
+fi
+
+
+ test -n "$CC" && break
+ done
+fi
+if test -z "$CC"; then
+ ac_ct_CC=$CC
+ for ac_prog in cl.exe
+do
+ # Extract the first word of "$ac_prog", so it can be a program name with args.
+set dummy $ac_prog; ac_word=$2
+{ $as_echo "$as_me:${as_lineno-$LINENO}: checking for $ac_word" >&5
+$as_echo_n "checking for $ac_word... " >&6; }
+if test "${ac_cv_prog_ac_ct_CC+set}" = set; then :
+ $as_echo_n "(cached) " >&6
+else
+ if test -n "$ac_ct_CC"; then
+ ac_cv_prog_ac_ct_CC="$ac_ct_CC" # Let the user override the test.
+else
+as_save_IFS=$IFS; IFS=$PATH_SEPARATOR
+for as_dir in $PATH
+do
+ IFS=$as_save_IFS
+ test -z "$as_dir" && as_dir=.
+ for ac_exec_ext in '' $ac_executable_extensions; do
+ if { test -f "$as_dir/$ac_word$ac_exec_ext" && $as_test_x "$as_dir/$ac_word$ac_exec_ext"; }; then
+ ac_cv_prog_ac_ct_CC="$ac_prog"
+ $as_echo "$as_me:${as_lineno-$LINENO}: found $as_dir/$ac_word$ac_exec_ext" >&5
+ break 2
+ fi
+done
+ done
+IFS=$as_save_IFS
+
+fi
+fi
+ac_ct_CC=$ac_cv_prog_ac_ct_CC
+if test -n "$ac_ct_CC"; then
+ { $as_echo "$as_me:${as_lineno-$LINENO}: result: $ac_ct_CC" >&5
+$as_echo "$ac_ct_CC" >&6; }
+else
+ { $as_echo "$as_me:${as_lineno-$LINENO}: result: no" >&5
+$as_echo "no" >&6; }
+fi
+
+
+ test -n "$ac_ct_CC" && break
+done
+
+ if test "x$ac_ct_CC" = x; then
+ CC=""
+ else
+ case $cross_compiling:$ac_tool_warned in
+yes:)
+{ $as_echo "$as_me:${as_lineno-$LINENO}: WARNING: using cross tools not prefixed with host triplet" >&5
+$as_echo "$as_me: WARNING: using cross tools not prefixed with host triplet" >&2;}
+ac_tool_warned=yes ;;
+esac
+ CC=$ac_ct_CC
+ fi
+fi
+
+fi
+
+
+test -z "$CC" && { { $as_echo "$as_me:${as_lineno-$LINENO}: error: in \`$ac_pwd':" >&5
+$as_echo "$as_me: error: in \`$ac_pwd':" >&2;}
+as_fn_error "no acceptable C compiler found in \$PATH
+See \`config.log' for more details." "$LINENO" 5; }
+
+# Provide some information about the compiler.
+$as_echo "$as_me:${as_lineno-$LINENO}: checking for C compiler version" >&5
+set X $ac_compile
+ac_compiler=$2
+for ac_option in --version -v -V -qversion; do
+ { { ac_try="$ac_compiler $ac_option >&5"
+case "(($ac_try" in
+ *\"* | *\`* | *\\*) ac_try_echo=\$ac_try;;
+ *) ac_try_echo=$ac_try;;
+esac
+eval ac_try_echo="\"\$as_me:${as_lineno-$LINENO}: $ac_try_echo\""
+$as_echo "$ac_try_echo"; } >&5
+ (eval "$ac_compiler $ac_option >&5") 2>conftest.err
+ ac_status=$?
+ if test -s conftest.err; then
+ sed '10a\
+... rest of stderr output deleted ...
+ 10q' conftest.err >conftest.er1
+ cat conftest.er1 >&5
+ rm -f conftest.er1 conftest.err
+ fi
+ $as_echo "$as_me:${as_lineno-$LINENO}: \$? = $ac_status" >&5
+ test $ac_status = 0; }
+done
+
+cat confdefs.h - <<_ACEOF >conftest.$ac_ext
+/* end confdefs.h. */
+#include <stdio.h>
+int
+main ()
+{
+FILE *f = fopen ("conftest.out", "w");
+ return ferror (f) || fclose (f) != 0;
+
+ ;
+ return 0;
+}
+_ACEOF
+ac_clean_files_save=$ac_clean_files
+ac_clean_files="$ac_clean_files a.out a.out.dSYM a.exe b.out conftest.out"
+# Try to create an executable without -o first, disregard a.out.
+# It will help us diagnose broken compilers, and finding out an intuition
+# of exeext.
+{ $as_echo "$as_me:${as_lineno-$LINENO}: checking for C compiler default output file name" >&5
+$as_echo_n "checking for C compiler default output file name... " >&6; }
+ac_link_default=`$as_echo "$ac_link" | sed 's/ -o *conftest[^ ]*//'`
+
+# The possible output files:
+ac_files="a.out conftest.exe conftest a.exe a_out.exe b.out conftest.*"
+
+ac_rmfiles=
+for ac_file in $ac_files
+do
+ case $ac_file in
+ *.$ac_ext | *.xcoff | *.tds | *.d | *.pdb | *.xSYM | *.bb | *.bbg | *.map | *.inf | *.dSYM | *.o | *.obj ) ;;
+ * ) ac_rmfiles="$ac_rmfiles $ac_file";;
+ esac
+done
+rm -f $ac_rmfiles
+
+if { { ac_try="$ac_link_default"
+case "(($ac_try" in
+ *\"* | *\`* | *\\*) ac_try_echo=\$ac_try;;
+ *) ac_try_echo=$ac_try;;
+esac
+eval ac_try_echo="\"\$as_me:${as_lineno-$LINENO}: $ac_try_echo\""
+$as_echo "$ac_try_echo"; } >&5
+ (eval "$ac_link_default") 2>&5
+ ac_status=$?
+ $as_echo "$as_me:${as_lineno-$LINENO}: \$? = $ac_status" >&5
+ test $ac_status = 0; }; then :
+ # Autoconf-2.13 could set the ac_cv_exeext variable to `no'.
+# So ignore a value of `no', otherwise this would lead to `EXEEXT = no'
+# in a Makefile. We should not override ac_cv_exeext if it was cached,
+# so that the user can short-circuit this test for compilers unknown to
+# Autoconf.
+for ac_file in $ac_files ''
+do
+ test -f "$ac_file" || continue
+ case $ac_file in
+ *.$ac_ext | *.xcoff | *.tds | *.d | *.pdb | *.xSYM | *.bb | *.bbg | *.map | *.inf | *.dSYM | *.o | *.obj )
+ ;;
+ [ab].out )
+ # We found the default executable, but exeext='' is most
+ # certainly right.
+ break;;
+ *.* )
+ if test "${ac_cv_exeext+set}" = set && test "$ac_cv_exeext" != no;
+ then :; else
+ ac_cv_exeext=`expr "$ac_file" : '[^.]*\(\..*\)'`
+ fi
+ # We set ac_cv_exeext here because the later test for it is not
+ # safe: cross compilers may not add the suffix if given an `-o'
+ # argument, so we may need to know it at that point already.
+ # Even if this section looks crufty: it has the advantage of
+ # actually working.
+ break;;
+ * )
+ break;;
+ esac
+done
+test "$ac_cv_exeext" = no && ac_cv_exeext=
+
+else
+ ac_file=''
+fi
+{ $as_echo "$as_me:${as_lineno-$LINENO}: result: $ac_file" >&5
+$as_echo "$ac_file" >&6; }
+if test -z "$ac_file"; then :
+ $as_echo "$as_me: failed program was:" >&5
+sed 's/^/| /' conftest.$ac_ext >&5
+
+{ { $as_echo "$as_me:${as_lineno-$LINENO}: error: in \`$ac_pwd':" >&5
+$as_echo "$as_me: error: in \`$ac_pwd':" >&2;}
+{ as_fn_set_status 77
+as_fn_error "C compiler cannot create executables
+See \`config.log' for more details." "$LINENO" 5; }; }
+fi
+ac_exeext=$ac_cv_exeext
+
+# Check that the compiler produces executables we can run. If not, either
+# the compiler is broken, or we cross compile.
+{ $as_echo "$as_me:${as_lineno-$LINENO}: checking whether the C compiler works" >&5
+$as_echo_n "checking whether the C compiler works... " >&6; }
+# If not cross compiling, check that we can run a simple program.
+if test "$cross_compiling" != yes; then
+ if { ac_try='./$ac_file'
+ { { case "(($ac_try" in
+ *\"* | *\`* | *\\*) ac_try_echo=\$ac_try;;
+ *) ac_try_echo=$ac_try;;
+esac
+eval ac_try_echo="\"\$as_me:${as_lineno-$LINENO}: $ac_try_echo\""
+$as_echo "$ac_try_echo"; } >&5
+ (eval "$ac_try") 2>&5
+ ac_status=$?
+ $as_echo "$as_me:${as_lineno-$LINENO}: \$? = $ac_status" >&5
+ test $ac_status = 0; }; }; then
+ cross_compiling=no
+ else
+ if test "$cross_compiling" = maybe; then
+ cross_compiling=yes
+ else
+ { { $as_echo "$as_me:${as_lineno-$LINENO}: error: in \`$ac_pwd':" >&5
+$as_echo "$as_me: error: in \`$ac_pwd':" >&2;}
+as_fn_error "cannot run C compiled programs.
+If you meant to cross compile, use \`--host'.
+See \`config.log' for more details." "$LINENO" 5; }
+ fi
+ fi
+fi
+{ $as_echo "$as_me:${as_lineno-$LINENO}: result: yes" >&5
+$as_echo "yes" >&6; }
+
+rm -f -r a.out a.out.dSYM a.exe conftest$ac_cv_exeext b.out conftest.out
+ac_clean_files=$ac_clean_files_save
+# Check that the compiler produces executables we can run. If not, either
+# the compiler is broken, or we cross compile.
+{ $as_echo "$as_me:${as_lineno-$LINENO}: checking whether we are cross compiling" >&5
+$as_echo_n "checking whether we are cross compiling... " >&6; }
+{ $as_echo "$as_me:${as_lineno-$LINENO}: result: $cross_compiling" >&5
+$as_echo "$cross_compiling" >&6; }
+
+{ $as_echo "$as_me:${as_lineno-$LINENO}: checking for suffix of executables" >&5
+$as_echo_n "checking for suffix of executables... " >&6; }
+if { { ac_try="$ac_link"
+case "(($ac_try" in
+ *\"* | *\`* | *\\*) ac_try_echo=\$ac_try;;
+ *) ac_try_echo=$ac_try;;
+esac
+eval ac_try_echo="\"\$as_me:${as_lineno-$LINENO}: $ac_try_echo\""
+$as_echo "$ac_try_echo"; } >&5
+ (eval "$ac_link") 2>&5
+ ac_status=$?
+ $as_echo "$as_me:${as_lineno-$LINENO}: \$? = $ac_status" >&5
+ test $ac_status = 0; }; then :
+ # If both `conftest.exe' and `conftest' are `present' (well, observable)
+# catch `conftest.exe'. For instance with Cygwin, `ls conftest' will
+# work properly (i.e., refer to `conftest.exe'), while it won't with
+# `rm'.
+for ac_file in conftest.exe conftest conftest.*; do
+ test -f "$ac_file" || continue
+ case $ac_file in
+ *.$ac_ext | *.xcoff | *.tds | *.d | *.pdb | *.xSYM | *.bb | *.bbg | *.map | *.inf | *.dSYM | *.o | *.obj ) ;;
+ *.* ) ac_cv_exeext=`expr "$ac_file" : '[^.]*\(\..*\)'`
+ break;;
+ * ) break;;
+ esac
+done
+else
+ { { $as_echo "$as_me:${as_lineno-$LINENO}: error: in \`$ac_pwd':" >&5
+$as_echo "$as_me: error: in \`$ac_pwd':" >&2;}
+as_fn_error "cannot compute suffix of executables: cannot compile and link
+See \`config.log' for more details." "$LINENO" 5; }
+fi
+rm -f conftest$ac_cv_exeext
+{ $as_echo "$as_me:${as_lineno-$LINENO}: result: $ac_cv_exeext" >&5
+$as_echo "$ac_cv_exeext" >&6; }
+
+rm -f conftest.$ac_ext
+EXEEXT=$ac_cv_exeext
+ac_exeext=$EXEEXT
+{ $as_echo "$as_me:${as_lineno-$LINENO}: checking for suffix of object files" >&5
+$as_echo_n "checking for suffix of object files... " >&6; }
+if test "${ac_cv_objext+set}" = set; then :
+ $as_echo_n "(cached) " >&6
+else
+ cat confdefs.h - <<_ACEOF >conftest.$ac_ext
+/* end confdefs.h. */
+
+int
+main ()
+{
+
+ ;
+ return 0;
+}
+_ACEOF
+rm -f conftest.o conftest.obj
+if { { ac_try="$ac_compile"
+case "(($ac_try" in
+ *\"* | *\`* | *\\*) ac_try_echo=\$ac_try;;
+ *) ac_try_echo=$ac_try;;
+esac
+eval ac_try_echo="\"\$as_me:${as_lineno-$LINENO}: $ac_try_echo\""
+$as_echo "$ac_try_echo"; } >&5
+ (eval "$ac_compile") 2>&5
+ ac_status=$?
+ $as_echo "$as_me:${as_lineno-$LINENO}: \$? = $ac_status" >&5
+ test $ac_status = 0; }; then :
+ for ac_file in conftest.o conftest.obj conftest.*; do
+ test -f "$ac_file" || continue;
+ case $ac_file in
+ *.$ac_ext | *.xcoff | *.tds | *.d | *.pdb | *.xSYM | *.bb | *.bbg | *.map | *.inf | *.dSYM ) ;;
+ *) ac_cv_objext=`expr "$ac_file" : '.*\.\(.*\)'`
+ break;;
+ esac
+done
+else
+ $as_echo "$as_me: failed program was:" >&5
+sed 's/^/| /' conftest.$ac_ext >&5
+
+{ { $as_echo "$as_me:${as_lineno-$LINENO}: error: in \`$ac_pwd':" >&5
+$as_echo "$as_me: error: in \`$ac_pwd':" >&2;}
+as_fn_error "cannot compute suffix of object files: cannot compile
+See \`config.log' for more details." "$LINENO" 5; }
+fi
+rm -f conftest.$ac_cv_objext conftest.$ac_ext
+fi
+{ $as_echo "$as_me:${as_lineno-$LINENO}: result: $ac_cv_objext" >&5
+$as_echo "$ac_cv_objext" >&6; }
+OBJEXT=$ac_cv_objext
+ac_objext=$OBJEXT
+{ $as_echo "$as_me:${as_lineno-$LINENO}: checking whether we are using the GNU C compiler" >&5
+$as_echo_n "checking whether we are using the GNU C compiler... " >&6; }
+if test "${ac_cv_c_compiler_gnu+set}" = set; then :
+ $as_echo_n "(cached) " >&6
+else
+ cat confdefs.h - <<_ACEOF >conftest.$ac_ext
+/* end confdefs.h. */
+
+int
+main ()
+{
+#ifndef __GNUC__
+ choke me
+#endif
+
+ ;
+ return 0;
+}
+_ACEOF
+if ac_fn_c_try_compile "$LINENO"; then :
+ ac_compiler_gnu=yes
+else
+ ac_compiler_gnu=no
+fi
+rm -f core conftest.err conftest.$ac_objext conftest.$ac_ext
+ac_cv_c_compiler_gnu=$ac_compiler_gnu
+
+fi
+{ $as_echo "$as_me:${as_lineno-$LINENO}: result: $ac_cv_c_compiler_gnu" >&5
+$as_echo "$ac_cv_c_compiler_gnu" >&6; }
+if test $ac_compiler_gnu = yes; then
+ GCC=yes
+else
+ GCC=
+fi
+ac_test_CFLAGS=${CFLAGS+set}
+ac_save_CFLAGS=$CFLAGS
+{ $as_echo "$as_me:${as_lineno-$LINENO}: checking whether $CC accepts -g" >&5
+$as_echo_n "checking whether $CC accepts -g... " >&6; }
+if test "${ac_cv_prog_cc_g+set}" = set; then :
+ $as_echo_n "(cached) " >&6
+else
+ ac_save_c_werror_flag=$ac_c_werror_flag
+ ac_c_werror_flag=yes
+ ac_cv_prog_cc_g=no
+ CFLAGS="-g"
+ cat confdefs.h - <<_ACEOF >conftest.$ac_ext
+/* end confdefs.h. */
+
+int
+main ()
+{
+
+ ;
+ return 0;
+}
+_ACEOF
+if ac_fn_c_try_compile "$LINENO"; then :
+ ac_cv_prog_cc_g=yes
+else
+ CFLAGS=""
+ cat confdefs.h - <<_ACEOF >conftest.$ac_ext
+/* end confdefs.h. */
+
+int
+main ()
+{
+
+ ;
+ return 0;
+}
+_ACEOF
+if ac_fn_c_try_compile "$LINENO"; then :
+
+else
+ ac_c_werror_flag=$ac_save_c_werror_flag
+ CFLAGS="-g"
+ cat confdefs.h - <<_ACEOF >conftest.$ac_ext
+/* end confdefs.h. */
+
+int
+main ()
+{
+
+ ;
+ return 0;
+}
+_ACEOF
+if ac_fn_c_try_compile "$LINENO"; then :
+ ac_cv_prog_cc_g=yes
+fi
+rm -f core conftest.err conftest.$ac_objext conftest.$ac_ext
+fi
+rm -f core conftest.err conftest.$ac_objext conftest.$ac_ext
+fi
+rm -f core conftest.err conftest.$ac_objext conftest.$ac_ext
+ ac_c_werror_flag=$ac_save_c_werror_flag
+fi
+{ $as_echo "$as_me:${as_lineno-$LINENO}: result: $ac_cv_prog_cc_g" >&5
+$as_echo "$ac_cv_prog_cc_g" >&6; }
+if test "$ac_test_CFLAGS" = set; then
+ CFLAGS=$ac_save_CFLAGS
+elif test $ac_cv_prog_cc_g = yes; then
+ if test "$GCC" = yes; then
+ CFLAGS="-g -O2"
+ else
+ CFLAGS="-g"
+ fi
+else
+ if test "$GCC" = yes; then
+ CFLAGS="-O2"
+ else
+ CFLAGS=
+ fi
+fi
+{ $as_echo "$as_me:${as_lineno-$LINENO}: checking for $CC option to accept ISO C89" >&5
+$as_echo_n "checking for $CC option to accept ISO C89... " >&6; }
+if test "${ac_cv_prog_cc_c89+set}" = set; then :
+ $as_echo_n "(cached) " >&6
+else
+ ac_cv_prog_cc_c89=no
+ac_save_CC=$CC
+cat confdefs.h - <<_ACEOF >conftest.$ac_ext
+/* end confdefs.h. */
+#include <stdarg.h>
+#include <stdio.h>
+#include <sys/types.h>
+#include <sys/stat.h>
+/* Most of the following tests are stolen from RCS 5.7's src/conf.sh. */
+struct buf { int x; };
+FILE * (*rcsopen) (struct buf *, struct stat *, int);
+static char *e (p, i)
+ char **p;
+ int i;
+{
+ return p[i];
+}
+static char *f (char * (*g) (char **, int), char **p, ...)
+{
+ char *s;
+ va_list v;
+ va_start (v,p);
+ s = g (p, va_arg (v,int));
+ va_end (v);
+ return s;
+}
+
+/* OSF 4.0 Compaq cc is some sort of almost-ANSI by default. It has
+ function prototypes and stuff, but not '\xHH' hex character constants.
+ These don't provoke an error unfortunately, instead are silently treated
+ as 'x'. The following induces an error, until -std is added to get
+ proper ANSI mode. Curiously '\x00'!='x' always comes out true, for an
+ array size at least. It's necessary to write '\x00'==0 to get something
+ that's true only with -std. */
+int osf4_cc_array ['\x00' == 0 ? 1 : -1];
+
+/* IBM C 6 for AIX is almost-ANSI by default, but it replaces macro parameters
+ inside strings and character constants. */
+#define FOO(x) 'x'
+int xlc6_cc_array[FOO(a) == 'x' ? 1 : -1];
+
+int test (int i, double x);
+struct s1 {int (*f) (int a);};
+struct s2 {int (*f) (double a);};
+int pairnames (int, char **, FILE *(*)(struct buf *, struct stat *, int), int, int);
+int argc;
+char **argv;
+int
+main ()
+{
+return f (e, argv, 0) != argv[0] || f (e, argv, 1) != argv[1];
+ ;
+ return 0;
+}
+_ACEOF
+for ac_arg in '' -qlanglvl=extc89 -qlanglvl=ansi -std \
+ -Ae "-Aa -D_HPUX_SOURCE" "-Xc -D__EXTENSIONS__"
+do
+ CC="$ac_save_CC $ac_arg"
+ if ac_fn_c_try_compile "$LINENO"; then :
+ ac_cv_prog_cc_c89=$ac_arg
+fi
+rm -f core conftest.err conftest.$ac_objext
+ test "x$ac_cv_prog_cc_c89" != "xno" && break
+done
+rm -f conftest.$ac_ext
+CC=$ac_save_CC
+
+fi
+# AC_CACHE_VAL
+case "x$ac_cv_prog_cc_c89" in
+ x)
+ { $as_echo "$as_me:${as_lineno-$LINENO}: result: none needed" >&5
+$as_echo "none needed" >&6; } ;;
+ xno)
+ { $as_echo "$as_me:${as_lineno-$LINENO}: result: unsupported" >&5
+$as_echo "unsupported" >&6; } ;;
+ *)
+ CC="$CC $ac_cv_prog_cc_c89"
+ { $as_echo "$as_me:${as_lineno-$LINENO}: result: $ac_cv_prog_cc_c89" >&5
+$as_echo "$ac_cv_prog_cc_c89" >&6; } ;;
+esac
+if test "x$ac_cv_prog_cc_c89" != xno; then :
+
+fi
+
+ac_ext=c
+ac_cpp='$CPP $CPPFLAGS'
+ac_compile='$CC -c $CFLAGS $CPPFLAGS conftest.$ac_ext >&5'
+ac_link='$CC -o conftest$ac_exeext $CFLAGS $CPPFLAGS $LDFLAGS conftest.$ac_ext $LIBS >&5'
+ac_compiler_gnu=$ac_cv_c_compiler_gnu
+
+depcc="$CC" am_compiler_list=
+
+{ $as_echo "$as_me:${as_lineno-$LINENO}: checking dependency style of $depcc" >&5
+$as_echo_n "checking dependency style of $depcc... " >&6; }
+if test "${am_cv_CC_dependencies_compiler_type+set}" = set; then :
+ $as_echo_n "(cached) " >&6
+else
+ if test -z "$AMDEP_TRUE" && test -f "$am_depcomp"; then
+ # We make a subdir and do the tests there. Otherwise we can end up
+ # making bogus files that we don't know about and never remove. For
+ # instance it was reported that on HP-UX the gcc test will end up
+ # making a dummy file named `D' -- because `-MD' means `put the output
+ # in D'.
+ mkdir conftest.dir
+ # Copy depcomp to subdir because otherwise we won't find it if we're
+ # using a relative directory.
+ cp "$am_depcomp" conftest.dir
+ cd conftest.dir
+ # We will build objects and dependencies in a subdirectory because
+ # it helps to detect inapplicable dependency modes. For instance
+ # both Tru64's cc and ICC support -MD to output dependencies as a
+ # side effect of compilation, but ICC will put the dependencies in
+ # the current directory while Tru64 will put them in the object
+ # directory.
+ mkdir sub
+
+ am_cv_CC_dependencies_compiler_type=none
+ if test "$am_compiler_list" = ""; then
+ am_compiler_list=`sed -n 's/^#*\([a-zA-Z0-9]*\))$/\1/p' < ./depcomp`
+ fi
+ am__universal=false
+ case " $depcc " in #(
+ *\ -arch\ *\ -arch\ *) am__universal=true ;;
+ esac
+
+ for depmode in $am_compiler_list; do
+ # Setup a source with many dependencies, because some compilers
+ # like to wrap large dependency lists on column 80 (with \), and
+ # we should not choose a depcomp mode which is confused by this.
+ #
+ # We need to recreate these files for each test, as the compiler may
+ # overwrite some of them when testing with obscure command lines.
+ # This happens at least with the AIX C compiler.
+ : > sub/conftest.c
+ for i in 1 2 3 4 5 6; do
+ echo '#include "conftst'$i'.h"' >> sub/conftest.c
+ # Using `: > sub/conftst$i.h' creates only sub/conftst1.h with
+ # Solaris 8's {/usr,}/bin/sh.
+ touch sub/conftst$i.h
+ done
+ echo "${am__include} ${am__quote}sub/conftest.Po${am__quote}" > confmf
+
+ # We check with `-c' and `-o' for the sake of the "dashmstdout"
+ # mode. It turns out that the SunPro C++ compiler does not properly
+ # handle `-M -o', and we need to detect this. Also, some Intel
+ # versions had trouble with output in subdirs
+ am__obj=sub/conftest.${OBJEXT-o}
+ am__minus_obj="-o $am__obj"
+ case $depmode in
+ gcc)
+ # This depmode causes a compiler race in universal mode.
+ test "$am__universal" = false || continue
+ ;;
+ nosideeffect)
+ # after this tag, mechanisms are not by side-effect, so they'll
+ # only be used when explicitly requested
+ if test "x$enable_dependency_tracking" = xyes; then
+ continue
+ else
+ break
+ fi
+ ;;
+ msvisualcpp | msvcmsys)
+ # This compiler won't grok `-c -o', but also, the minuso test has
+ # not run yet. These depmodes are late enough in the game, and
+ # so weak that their functioning should not be impacted.
+ am__obj=conftest.${OBJEXT-o}
+ am__minus_obj=
+ ;;
+ none) break ;;
+ esac
+ if depmode=$depmode \
+ source=sub/conftest.c object=$am__obj \
+ depfile=sub/conftest.Po tmpdepfile=sub/conftest.TPo \
+ $SHELL ./depcomp $depcc -c $am__minus_obj sub/conftest.c \
+ >/dev/null 2>conftest.err &&
+ grep sub/conftst1.h sub/conftest.Po > /dev/null 2>&1 &&
+ grep sub/conftst6.h sub/conftest.Po > /dev/null 2>&1 &&
+ grep $am__obj sub/conftest.Po > /dev/null 2>&1 &&
+ ${MAKE-make} -s -f confmf > /dev/null 2>&1; then
+ # icc doesn't choke on unknown options, it will just issue warnings
+ # or remarks (even with -Werror). So we grep stderr for any message
+ # that says an option was ignored or not supported.
+ # When given -MP, icc 7.0 and 7.1 complain thusly:
+ # icc: Command line warning: ignoring option '-M'; no argument required
+ # The diagnosis changed in icc 8.0:
+ # icc: Command line remark: option '-MP' not supported
+ if (grep 'ignoring option' conftest.err ||
+ grep 'not supported' conftest.err) >/dev/null 2>&1; then :; else
+ am_cv_CC_dependencies_compiler_type=$depmode
+ break
+ fi
+ fi
+ done
+
+ cd ..
+ rm -rf conftest.dir
+else
+ am_cv_CC_dependencies_compiler_type=none
+fi
+
+fi
+{ $as_echo "$as_me:${as_lineno-$LINENO}: result: $am_cv_CC_dependencies_compiler_type" >&5
+$as_echo "$am_cv_CC_dependencies_compiler_type" >&6; }
+CCDEPMODE=depmode=$am_cv_CC_dependencies_compiler_type
+
+ if
+ test "x$enable_dependency_tracking" != xno \
+ && test "$am_cv_CC_dependencies_compiler_type" = gcc3; then
+ am__fastdepCC_TRUE=
+ am__fastdepCC_FALSE='#'
+else
+ am__fastdepCC_TRUE='#'
+ am__fastdepCC_FALSE=
+fi
+
+
+ { $as_echo "$as_me:${as_lineno-$LINENO}: checking for $CC option to accept ISO C99" >&5
+$as_echo_n "checking for $CC option to accept ISO C99... " >&6; }
+if test "${ac_cv_prog_cc_c99+set}" = set; then :
+ $as_echo_n "(cached) " >&6
+else
+ ac_cv_prog_cc_c99=no
+ac_save_CC=$CC
+cat confdefs.h - <<_ACEOF >conftest.$ac_ext
+/* end confdefs.h. */
+#include <stdarg.h>
+#include <stdbool.h>
+#include <stdlib.h>
+#include <wchar.h>
+#include <stdio.h>
+
+// Check varargs macros. These examples are taken from C99 6.10.3.5.
+#define debug(...) fprintf (stderr, __VA_ARGS__)
+#define showlist(...) puts (#__VA_ARGS__)
+#define report(test,...) ((test) ? puts (#test) : printf (__VA_ARGS__))
+static void
+test_varargs_macros (void)
+{
+ int x = 1234;
+ int y = 5678;
+ debug ("Flag");
+ debug ("X = %d\n", x);
+ showlist (The first, second, and third items.);
+ report (x>y, "x is %d but y is %d", x, y);
+}
+
+// Check long long types.
+#define BIG64 18446744073709551615ull
+#define BIG32 4294967295ul
+#define BIG_OK (BIG64 / BIG32 == 4294967297ull && BIG64 % BIG32 == 0)
+#if !BIG_OK
+ your preprocessor is broken;
+#endif
+#if BIG_OK
+#else
+ your preprocessor is broken;
+#endif
+static long long int bignum = -9223372036854775807LL;
+static unsigned long long int ubignum = BIG64;
+
+struct incomplete_array
+{
+ int datasize;
+ double data[];
+};
+
+struct named_init {
+ int number;
+ const wchar_t *name;
+ double average;
+};
+
+typedef const char *ccp;
+
+static inline int
+test_restrict (ccp restrict text)
+{
+ // See if C++-style comments work.
+ // Iterate through items via the restricted pointer.
+ // Also check for declarations in for loops.
+ for (unsigned int i = 0; *(text+i) != '\0'; ++i)
+ continue;
+ return 0;
+}
+
+// Check varargs and va_copy.
+static void
+test_varargs (const char *format, ...)
+{
+ va_list args;
+ va_start (args, format);
+ va_list args_copy;
+ va_copy (args_copy, args);
+
+ const char *str;
+ int number;
+ float fnumber;
+
+ while (*format)
+ {
+ switch (*format++)
+ {
+ case 's': // string
+ str = va_arg (args_copy, const char *);
+ break;
+ case 'd': // int
+ number = va_arg (args_copy, int);
+ break;
+ case 'f': // float
+ fnumber = va_arg (args_copy, double);
+ break;
+ default:
+ break;
+ }
+ }
+ va_end (args_copy);
+ va_end (args);
+}
+
+int
+main ()
+{
+
+ // Check bool.
+ _Bool success = false;
+
+ // Check restrict.
+ if (test_restrict ("String literal") == 0)
+ success = true;
+ char *restrict newvar = "Another string";
+
+ // Check varargs.
+ test_varargs ("s, d' f .", "string", 65, 34.234);
+ test_varargs_macros ();
+
+ // Check flexible array members.
+ struct incomplete_array *ia =
+ malloc (sizeof (struct incomplete_array) + (sizeof (double) * 10));
+ ia->datasize = 10;
+ for (int i = 0; i < ia->datasize; ++i)
+ ia->data[i] = i * 1.234;
+
+ // Check named initializers.
+ struct named_init ni = {
+ .number = 34,
+ .name = L"Test wide string",
+ .average = 543.34343,
+ };
+
+ ni.number = 58;
+
+ int dynamic_array[ni.number];
+ dynamic_array[ni.number - 1] = 543;
+
+ // work around unused variable warnings
+ return (!success || bignum == 0LL || ubignum == 0uLL || newvar[0] == 'x'
+ || dynamic_array[ni.number - 1] != 543);
+
+ ;
+ return 0;
+}
+_ACEOF
+for ac_arg in '' -std=gnu99 -std=c99 -c99 -AC99 -xc99=all -qlanglvl=extc99
+do
+ CC="$ac_save_CC $ac_arg"
+ if ac_fn_c_try_compile "$LINENO"; then :
+ ac_cv_prog_cc_c99=$ac_arg
+fi
+rm -f core conftest.err conftest.$ac_objext
+ test "x$ac_cv_prog_cc_c99" != "xno" && break
+done
+rm -f conftest.$ac_ext
+CC=$ac_save_CC
+
+fi
+# AC_CACHE_VAL
+case "x$ac_cv_prog_cc_c99" in
+ x)
+ { $as_echo "$as_me:${as_lineno-$LINENO}: result: none needed" >&5
+$as_echo "none needed" >&6; } ;;
+ xno)
+ { $as_echo "$as_me:${as_lineno-$LINENO}: result: unsupported" >&5
+$as_echo "unsupported" >&6; } ;;
+ *)
+ CC="$CC $ac_cv_prog_cc_c99"
+ { $as_echo "$as_me:${as_lineno-$LINENO}: result: $ac_cv_prog_cc_c99" >&5
+$as_echo "$ac_cv_prog_cc_c99" >&6; } ;;
+esac
+if test "x$ac_cv_prog_cc_c99" != xno; then :
+
+fi
+
+
+if test x$ac_cv_prog_cc_c99 = xno ; then
+ as_fn_error "No C99 compiler was found." "$LINENO" 5
+fi
+
+if test "x$CC" != xcc; then
+ { $as_echo "$as_me:${as_lineno-$LINENO}: checking whether $CC and cc understand -c and -o together" >&5
+$as_echo_n "checking whether $CC and cc understand -c and -o together... " >&6; }
+else
+ { $as_echo "$as_me:${as_lineno-$LINENO}: checking whether cc understands -c and -o together" >&5
+$as_echo_n "checking whether cc understands -c and -o together... " >&6; }
+fi
+set dummy $CC; ac_cc=`$as_echo "$2" |
+ sed 's/[^a-zA-Z0-9_]/_/g;s/^[0-9]/_/'`
+if { as_var=ac_cv_prog_cc_${ac_cc}_c_o; eval "test \"\${$as_var+set}\" = set"; }; then :
+ $as_echo_n "(cached) " >&6
+else
+ cat confdefs.h - <<_ACEOF >conftest.$ac_ext
+/* end confdefs.h. */
+
+int
+main ()
+{
+
+ ;
+ return 0;
+}
+_ACEOF
+# Make sure it works both with $CC and with simple cc.
+# We do the test twice because some compilers refuse to overwrite an
+# existing .o file with -o, though they will create one.
+ac_try='$CC -c conftest.$ac_ext -o conftest2.$ac_objext >&5'
+rm -f conftest2.*
+if { { case "(($ac_try" in
+ *\"* | *\`* | *\\*) ac_try_echo=\$ac_try;;
+ *) ac_try_echo=$ac_try;;
+esac
+eval ac_try_echo="\"\$as_me:${as_lineno-$LINENO}: $ac_try_echo\""
+$as_echo "$ac_try_echo"; } >&5
+ (eval "$ac_try") 2>&5
+ ac_status=$?
+ $as_echo "$as_me:${as_lineno-$LINENO}: \$? = $ac_status" >&5
+ test $ac_status = 0; } &&
+ test -f conftest2.$ac_objext && { { case "(($ac_try" in
+ *\"* | *\`* | *\\*) ac_try_echo=\$ac_try;;
+ *) ac_try_echo=$ac_try;;
+esac
+eval ac_try_echo="\"\$as_me:${as_lineno-$LINENO}: $ac_try_echo\""
+$as_echo "$ac_try_echo"; } >&5
+ (eval "$ac_try") 2>&5
+ ac_status=$?
+ $as_echo "$as_me:${as_lineno-$LINENO}: \$? = $ac_status" >&5
+ test $ac_status = 0; };
+then
+ eval ac_cv_prog_cc_${ac_cc}_c_o=yes
+ if test "x$CC" != xcc; then
+ # Test first that cc exists at all.
+ if { ac_try='cc -c conftest.$ac_ext >&5'
+ { { case "(($ac_try" in
+ *\"* | *\`* | *\\*) ac_try_echo=\$ac_try;;
+ *) ac_try_echo=$ac_try;;
+esac
+eval ac_try_echo="\"\$as_me:${as_lineno-$LINENO}: $ac_try_echo\""
+$as_echo "$ac_try_echo"; } >&5
+ (eval "$ac_try") 2>&5
+ ac_status=$?
+ $as_echo "$as_me:${as_lineno-$LINENO}: \$? = $ac_status" >&5
+ test $ac_status = 0; }; }; then
+ ac_try='cc -c conftest.$ac_ext -o conftest2.$ac_objext >&5'
+ rm -f conftest2.*
+ if { { case "(($ac_try" in
+ *\"* | *\`* | *\\*) ac_try_echo=\$ac_try;;
+ *) ac_try_echo=$ac_try;;
+esac
+eval ac_try_echo="\"\$as_me:${as_lineno-$LINENO}: $ac_try_echo\""
+$as_echo "$ac_try_echo"; } >&5
+ (eval "$ac_try") 2>&5
+ ac_status=$?
+ $as_echo "$as_me:${as_lineno-$LINENO}: \$? = $ac_status" >&5
+ test $ac_status = 0; } &&
+ test -f conftest2.$ac_objext && { { case "(($ac_try" in
+ *\"* | *\`* | *\\*) ac_try_echo=\$ac_try;;
+ *) ac_try_echo=$ac_try;;
+esac
+eval ac_try_echo="\"\$as_me:${as_lineno-$LINENO}: $ac_try_echo\""
+$as_echo "$ac_try_echo"; } >&5
+ (eval "$ac_try") 2>&5
+ ac_status=$?
+ $as_echo "$as_me:${as_lineno-$LINENO}: \$? = $ac_status" >&5
+ test $ac_status = 0; };
+ then
+ # cc works too.
+ :
+ else
+ # cc exists but doesn't like -o.
+ eval ac_cv_prog_cc_${ac_cc}_c_o=no
+ fi
+ fi
+ fi
+else
+ eval ac_cv_prog_cc_${ac_cc}_c_o=no
+fi
+rm -f core conftest*
+
+fi
+if eval test \$ac_cv_prog_cc_${ac_cc}_c_o = yes; then
+ { $as_echo "$as_me:${as_lineno-$LINENO}: result: yes" >&5
+$as_echo "yes" >&6; }
+else
+ { $as_echo "$as_me:${as_lineno-$LINENO}: result: no" >&5
+$as_echo "no" >&6; }
+
+$as_echo "#define NO_MINUS_C_MINUS_O 1" >>confdefs.h
+
+fi
+
+# FIXME: we rely on the cache variable name because
+# there is no other way.
+set dummy $CC
+am_cc=`echo $2 | sed 's/[^a-zA-Z0-9_]/_/g;s/^[0-9]/_/'`
+eval am_t=\$ac_cv_prog_cc_${am_cc}_c_o
+if test "$am_t" != yes; then
+ # Losing compiler, so override with the script.
+ # FIXME: It is wrong to rewrite CC.
+ # But if we don't then we get into trouble of one sort or another.
+ # A longer-term fix would be to have automake use am__CC in this case,
+ # and then we could set am__CC="\$(top_srcdir)/compile \$(CC)"
+ CC="$am_aux_dir/compile $CC"
+fi
+
+
+# By default we simply use the C compiler to build assembly code.
+
+test "${CCAS+set}" = set || CCAS=$CC
+test "${CCASFLAGS+set}" = set || CCASFLAGS=$CFLAGS
+
+
+
+depcc="$CCAS" am_compiler_list=
+
+{ $as_echo "$as_me:${as_lineno-$LINENO}: checking dependency style of $depcc" >&5
+$as_echo_n "checking dependency style of $depcc... " >&6; }
+if test "${am_cv_CCAS_dependencies_compiler_type+set}" = set; then :
+ $as_echo_n "(cached) " >&6
+else
+ if test -z "$AMDEP_TRUE" && test -f "$am_depcomp"; then
+ # We make a subdir and do the tests there. Otherwise we can end up
+ # making bogus files that we don't know about and never remove. For
+ # instance it was reported that on HP-UX the gcc test will end up
+ # making a dummy file named `D' -- because `-MD' means `put the output
+ # in D'.
+ mkdir conftest.dir
+ # Copy depcomp to subdir because otherwise we won't find it if we're
+ # using a relative directory.
+ cp "$am_depcomp" conftest.dir
+ cd conftest.dir
+ # We will build objects and dependencies in a subdirectory because
+ # it helps to detect inapplicable dependency modes. For instance
+ # both Tru64's cc and ICC support -MD to output dependencies as a
+ # side effect of compilation, but ICC will put the dependencies in
+ # the current directory while Tru64 will put them in the object
+ # directory.
+ mkdir sub
+
+ am_cv_CCAS_dependencies_compiler_type=none
+ if test "$am_compiler_list" = ""; then
+ am_compiler_list=`sed -n 's/^#*\([a-zA-Z0-9]*\))$/\1/p' < ./depcomp`
+ fi
+ am__universal=false
+
+
+ for depmode in $am_compiler_list; do
+ # Setup a source with many dependencies, because some compilers
+ # like to wrap large dependency lists on column 80 (with \), and
+ # we should not choose a depcomp mode which is confused by this.
+ #
+ # We need to recreate these files for each test, as the compiler may
+ # overwrite some of them when testing with obscure command lines.
+ # This happens at least with the AIX C compiler.
+ : > sub/conftest.c
+ for i in 1 2 3 4 5 6; do
+ echo '#include "conftst'$i'.h"' >> sub/conftest.c
+ # Using `: > sub/conftst$i.h' creates only sub/conftst1.h with
+ # Solaris 8's {/usr,}/bin/sh.
+ touch sub/conftst$i.h
+ done
+ echo "${am__include} ${am__quote}sub/conftest.Po${am__quote}" > confmf
+
+ # We check with `-c' and `-o' for the sake of the "dashmstdout"
+ # mode. It turns out that the SunPro C++ compiler does not properly
+ # handle `-M -o', and we need to detect this. Also, some Intel
+ # versions had trouble with output in subdirs
+ am__obj=sub/conftest.${OBJEXT-o}
+ am__minus_obj="-o $am__obj"
+ case $depmode in
+ gcc)
+ # This depmode causes a compiler race in universal mode.
+ test "$am__universal" = false || continue
+ ;;
+ nosideeffect)
+ # after this tag, mechanisms are not by side-effect, so they'll
+ # only be used when explicitly requested
+ if test "x$enable_dependency_tracking" = xyes; then
+ continue
+ else
+ break
+ fi
+ ;;
+ msvisualcpp | msvcmsys)
+ # This compiler won't grok `-c -o', but also, the minuso test has
+ # not run yet. These depmodes are late enough in the game, and
+ # so weak that their functioning should not be impacted.
+ am__obj=conftest.${OBJEXT-o}
+ am__minus_obj=
+ ;;
+ none) break ;;
+ esac
+ if depmode=$depmode \
+ source=sub/conftest.c object=$am__obj \
+ depfile=sub/conftest.Po tmpdepfile=sub/conftest.TPo \
+ $SHELL ./depcomp $depcc -c $am__minus_obj sub/conftest.c \
+ >/dev/null 2>conftest.err &&
+ grep sub/conftst1.h sub/conftest.Po > /dev/null 2>&1 &&
+ grep sub/conftst6.h sub/conftest.Po > /dev/null 2>&1 &&
+ grep $am__obj sub/conftest.Po > /dev/null 2>&1 &&
+ ${MAKE-make} -s -f confmf > /dev/null 2>&1; then
+ # icc doesn't choke on unknown options, it will just issue warnings
+ # or remarks (even with -Werror). So we grep stderr for any message
+ # that says an option was ignored or not supported.
+ # When given -MP, icc 7.0 and 7.1 complain thusly:
+ # icc: Command line warning: ignoring option '-M'; no argument required
+ # The diagnosis changed in icc 8.0:
+ # icc: Command line remark: option '-MP' not supported
+ if (grep 'ignoring option' conftest.err ||
+ grep 'not supported' conftest.err) >/dev/null 2>&1; then :; else
+ am_cv_CCAS_dependencies_compiler_type=$depmode
+ break
+ fi
+ fi
+ done
+
+ cd ..
+ rm -rf conftest.dir
+else
+ am_cv_CCAS_dependencies_compiler_type=none
+fi
+
+fi
+{ $as_echo "$as_me:${as_lineno-$LINENO}: result: $am_cv_CCAS_dependencies_compiler_type" >&5
+$as_echo "$am_cv_CCAS_dependencies_compiler_type" >&6; }
+CCASDEPMODE=depmode=$am_cv_CCAS_dependencies_compiler_type
+
+ if
+ test "x$enable_dependency_tracking" != xno \
+ && test "$am_cv_CCAS_dependencies_compiler_type" = gcc3; then
+ am__fastdepCCAS_TRUE=
+ am__fastdepCCAS_FALSE='#'
+else
+ am__fastdepCCAS_TRUE='#'
+ am__fastdepCCAS_FALSE=
+fi
+
+
+
+ac_ext=c
+ac_cpp='$CPP $CPPFLAGS'
+ac_compile='$CC -c $CFLAGS $CPPFLAGS conftest.$ac_ext >&5'
+ac_link='$CC -o conftest$ac_exeext $CFLAGS $CPPFLAGS $LDFLAGS conftest.$ac_ext $LIBS >&5'
+ac_compiler_gnu=$ac_cv_c_compiler_gnu
+{ $as_echo "$as_me:${as_lineno-$LINENO}: checking how to run the C preprocessor" >&5
+$as_echo_n "checking how to run the C preprocessor... " >&6; }
+# On Suns, sometimes $CPP names a directory.
+if test -n "$CPP" && test -d "$CPP"; then
+ CPP=
+fi
+if test -z "$CPP"; then
+ if test "${ac_cv_prog_CPP+set}" = set; then :
+ $as_echo_n "(cached) " >&6
+else
+ # Double quotes because CPP needs to be expanded
+ for CPP in "$CC -E" "$CC -E -traditional-cpp" "/lib/cpp"
+ do
+ ac_preproc_ok=false
+for ac_c_preproc_warn_flag in '' yes
+do
+ # Use a header file that comes with gcc, so configuring glibc
+ # with a fresh cross-compiler works.
+ # Prefer <limits.h> to <assert.h> if __STDC__ is defined, since
+ # <limits.h> exists even on freestanding compilers.
+ # On the NeXT, cc -E runs the code through the compiler's parser,
+ # not just through cpp. "Syntax error" is here to catch this case.
+ cat confdefs.h - <<_ACEOF >conftest.$ac_ext
+/* end confdefs.h. */
+#ifdef __STDC__
+# include <limits.h>
+#else
+# include <assert.h>
+#endif
+ Syntax error
+_ACEOF
+if ac_fn_c_try_cpp "$LINENO"; then :
+
+else
+ # Broken: fails on valid input.
+continue
+fi
+rm -f conftest.err conftest.$ac_ext
+
+ # OK, works on sane cases. Now check whether nonexistent headers
+ # can be detected and how.
+ cat confdefs.h - <<_ACEOF >conftest.$ac_ext
+/* end confdefs.h. */
+#include <ac_nonexistent.h>
+_ACEOF
+if ac_fn_c_try_cpp "$LINENO"; then :
+ # Broken: success on invalid input.
+continue
+else
+ # Passes both tests.
+ac_preproc_ok=:
+break
+fi
+rm -f conftest.err conftest.$ac_ext
+
+done
+# Because of `break', _AC_PREPROC_IFELSE's cleaning code was skipped.
+rm -f conftest.err conftest.$ac_ext
+if $ac_preproc_ok; then :
+ break
+fi
+
+ done
+ ac_cv_prog_CPP=$CPP
+
+fi
+ CPP=$ac_cv_prog_CPP
+else
+ ac_cv_prog_CPP=$CPP
+fi
+{ $as_echo "$as_me:${as_lineno-$LINENO}: result: $CPP" >&5
+$as_echo "$CPP" >&6; }
+ac_preproc_ok=false
+for ac_c_preproc_warn_flag in '' yes
+do
+ # Use a header file that comes with gcc, so configuring glibc
+ # with a fresh cross-compiler works.
+ # Prefer <limits.h> to <assert.h> if __STDC__ is defined, since
+ # <limits.h> exists even on freestanding compilers.
+ # On the NeXT, cc -E runs the code through the compiler's parser,
+ # not just through cpp. "Syntax error" is here to catch this case.
+ cat confdefs.h - <<_ACEOF >conftest.$ac_ext
+/* end confdefs.h. */
+#ifdef __STDC__
+# include <limits.h>
+#else
+# include <assert.h>
+#endif
+ Syntax error
+_ACEOF
+if ac_fn_c_try_cpp "$LINENO"; then :
+
+else
+ # Broken: fails on valid input.
+continue
+fi
+rm -f conftest.err conftest.$ac_ext
+
+ # OK, works on sane cases. Now check whether nonexistent headers
+ # can be detected and how.
+ cat confdefs.h - <<_ACEOF >conftest.$ac_ext
+/* end confdefs.h. */
+#include <ac_nonexistent.h>
+_ACEOF
+if ac_fn_c_try_cpp "$LINENO"; then :
+ # Broken: success on invalid input.
+continue
+else
+ # Passes both tests.
+ac_preproc_ok=:
+break
+fi
+rm -f conftest.err conftest.$ac_ext
+
+done
+# Because of `break', _AC_PREPROC_IFELSE's cleaning code was skipped.
+rm -f conftest.err conftest.$ac_ext
+if $ac_preproc_ok; then :
+
+else
+ { { $as_echo "$as_me:${as_lineno-$LINENO}: error: in \`$ac_pwd':" >&5
+$as_echo "$as_me: error: in \`$ac_pwd':" >&2;}
+as_fn_error "C preprocessor \"$CPP\" fails sanity check
+See \`config.log' for more details." "$LINENO" 5; }
+fi
+
+ac_ext=c
+ac_cpp='$CPP $CPPFLAGS'
+ac_compile='$CC -c $CFLAGS $CPPFLAGS conftest.$ac_ext >&5'
+ac_link='$CC -o conftest$ac_exeext $CFLAGS $CPPFLAGS $LDFLAGS conftest.$ac_ext $LIBS >&5'
+ac_compiler_gnu=$ac_cv_c_compiler_gnu
+
+
+{ $as_echo "$as_me:${as_lineno-$LINENO}: checking for grep that handles long lines and -e" >&5
+$as_echo_n "checking for grep that handles long lines and -e... " >&6; }
+if test "${ac_cv_path_GREP+set}" = set; then :
+ $as_echo_n "(cached) " >&6
+else
+ if test -z "$GREP"; then
+ ac_path_GREP_found=false
+ # Loop through the user's path and test for each of PROGNAME-LIST
+ as_save_IFS=$IFS; IFS=$PATH_SEPARATOR
+for as_dir in $PATH$PATH_SEPARATOR/usr/xpg4/bin
+do
+ IFS=$as_save_IFS
+ test -z "$as_dir" && as_dir=.
+ for ac_prog in grep ggrep; do
+ for ac_exec_ext in '' $ac_executable_extensions; do
+ ac_path_GREP="$as_dir/$ac_prog$ac_exec_ext"
+ { test -f "$ac_path_GREP" && $as_test_x "$ac_path_GREP"; } || continue
+# Check for GNU ac_path_GREP and select it if it is found.
+ # Check for GNU $ac_path_GREP
+case `"$ac_path_GREP" --version 2>&1` in
+*GNU*)
+ ac_cv_path_GREP="$ac_path_GREP" ac_path_GREP_found=:;;
+*)
+ ac_count=0
+ $as_echo_n 0123456789 >"conftest.in"
+ while :
+ do
+ cat "conftest.in" "conftest.in" >"conftest.tmp"
+ mv "conftest.tmp" "conftest.in"
+ cp "conftest.in" "conftest.nl"
+ $as_echo 'GREP' >> "conftest.nl"
+ "$ac_path_GREP" -e 'GREP$' -e '-(cannot match)-' < "conftest.nl" >"conftest.out" 2>/dev/null || break
+ diff "conftest.out" "conftest.nl" >/dev/null 2>&1 || break
+ as_fn_arith $ac_count + 1 && ac_count=$as_val
+ if test $ac_count -gt ${ac_path_GREP_max-0}; then
+ # Best one so far, save it but keep looking for a better one
+ ac_cv_path_GREP="$ac_path_GREP"
+ ac_path_GREP_max=$ac_count
+ fi
+ # 10*(2^10) chars as input seems more than enough
+ test $ac_count -gt 10 && break
+ done
+ rm -f conftest.in conftest.tmp conftest.nl conftest.out;;
+esac
+
+ $ac_path_GREP_found && break 3
+ done
+ done
+ done
+IFS=$as_save_IFS
+ if test -z "$ac_cv_path_GREP"; then
+ as_fn_error "no acceptable grep could be found in $PATH$PATH_SEPARATOR/usr/xpg4/bin" "$LINENO" 5
+ fi
+else
+ ac_cv_path_GREP=$GREP
+fi
+
+fi
+{ $as_echo "$as_me:${as_lineno-$LINENO}: result: $ac_cv_path_GREP" >&5
+$as_echo "$ac_cv_path_GREP" >&6; }
+ GREP="$ac_cv_path_GREP"
+
+
+{ $as_echo "$as_me:${as_lineno-$LINENO}: checking for egrep" >&5
+$as_echo_n "checking for egrep... " >&6; }
+if test "${ac_cv_path_EGREP+set}" = set; then :
+ $as_echo_n "(cached) " >&6
+else
+ if echo a | $GREP -E '(a|b)' >/dev/null 2>&1
+ then ac_cv_path_EGREP="$GREP -E"
+ else
+ if test -z "$EGREP"; then
+ ac_path_EGREP_found=false
+ # Loop through the user's path and test for each of PROGNAME-LIST
+ as_save_IFS=$IFS; IFS=$PATH_SEPARATOR
+for as_dir in $PATH$PATH_SEPARATOR/usr/xpg4/bin
+do
+ IFS=$as_save_IFS
+ test -z "$as_dir" && as_dir=.
+ for ac_prog in egrep; do
+ for ac_exec_ext in '' $ac_executable_extensions; do
+ ac_path_EGREP="$as_dir/$ac_prog$ac_exec_ext"
+ { test -f "$ac_path_EGREP" && $as_test_x "$ac_path_EGREP"; } || continue
+# Check for GNU ac_path_EGREP and select it if it is found.
+ # Check for GNU $ac_path_EGREP
+case `"$ac_path_EGREP" --version 2>&1` in
+*GNU*)
+ ac_cv_path_EGREP="$ac_path_EGREP" ac_path_EGREP_found=:;;
+*)
+ ac_count=0
+ $as_echo_n 0123456789 >"conftest.in"
+ while :
+ do
+ cat "conftest.in" "conftest.in" >"conftest.tmp"
+ mv "conftest.tmp" "conftest.in"
+ cp "conftest.in" "conftest.nl"
+ $as_echo 'EGREP' >> "conftest.nl"
+ "$ac_path_EGREP" 'EGREP$' < "conftest.nl" >"conftest.out" 2>/dev/null || break
+ diff "conftest.out" "conftest.nl" >/dev/null 2>&1 || break
+ as_fn_arith $ac_count + 1 && ac_count=$as_val
+ if test $ac_count -gt ${ac_path_EGREP_max-0}; then
+ # Best one so far, save it but keep looking for a better one
+ ac_cv_path_EGREP="$ac_path_EGREP"
+ ac_path_EGREP_max=$ac_count
+ fi
+ # 10*(2^10) chars as input seems more than enough
+ test $ac_count -gt 10 && break
+ done
+ rm -f conftest.in conftest.tmp conftest.nl conftest.out;;
+esac
+
+ $ac_path_EGREP_found && break 3
+ done
+ done
+ done
+IFS=$as_save_IFS
+ if test -z "$ac_cv_path_EGREP"; then
+ as_fn_error "no acceptable egrep could be found in $PATH$PATH_SEPARATOR/usr/xpg4/bin" "$LINENO" 5
+ fi
+else
+ ac_cv_path_EGREP=$EGREP
+fi
+
+ fi
+fi
+{ $as_echo "$as_me:${as_lineno-$LINENO}: result: $ac_cv_path_EGREP" >&5
+$as_echo "$ac_cv_path_EGREP" >&6; }
+ EGREP="$ac_cv_path_EGREP"
+
+
+{ $as_echo "$as_me:${as_lineno-$LINENO}: checking for ANSI C header files" >&5
+$as_echo_n "checking for ANSI C header files... " >&6; }
+if test "${ac_cv_header_stdc+set}" = set; then :
+ $as_echo_n "(cached) " >&6
+else
+ cat confdefs.h - <<_ACEOF >conftest.$ac_ext
+/* end confdefs.h. */
+#include <stdlib.h>
+#include <stdarg.h>
+#include <string.h>
+#include <float.h>
+
+int
+main ()
+{
+
+ ;
+ return 0;
+}
+_ACEOF
+if ac_fn_c_try_compile "$LINENO"; then :
+ ac_cv_header_stdc=yes
+else
+ ac_cv_header_stdc=no
+fi
+rm -f core conftest.err conftest.$ac_objext conftest.$ac_ext
+
+if test $ac_cv_header_stdc = yes; then
+ # SunOS 4.x string.h does not declare mem*, contrary to ANSI.
+ cat confdefs.h - <<_ACEOF >conftest.$ac_ext
+/* end confdefs.h. */
+#include <string.h>
+
+_ACEOF
+if (eval "$ac_cpp conftest.$ac_ext") 2>&5 |
+ $EGREP "memchr" >/dev/null 2>&1; then :
+
+else
+ ac_cv_header_stdc=no
+fi
+rm -f conftest*
+
+fi
+
+if test $ac_cv_header_stdc = yes; then
+ # ISC 2.0.2 stdlib.h does not declare free, contrary to ANSI.
+ cat confdefs.h - <<_ACEOF >conftest.$ac_ext
+/* end confdefs.h. */
+#include <stdlib.h>
+
+_ACEOF
+if (eval "$ac_cpp conftest.$ac_ext") 2>&5 |
+ $EGREP "free" >/dev/null 2>&1; then :
+
+else
+ ac_cv_header_stdc=no
+fi
+rm -f conftest*
+
+fi
+
+if test $ac_cv_header_stdc = yes; then
+ # /bin/cc in Irix-4.0.5 gets non-ANSI ctype macros unless using -ansi.
+ if test "$cross_compiling" = yes; then :
+ :
+else
+ cat confdefs.h - <<_ACEOF >conftest.$ac_ext
+/* end confdefs.h. */
+#include <ctype.h>
+#include <stdlib.h>
+#if ((' ' & 0x0FF) == 0x020)
+# define ISLOWER(c) ('a' <= (c) && (c) <= 'z')
+# define TOUPPER(c) (ISLOWER(c) ? 'A' + ((c) - 'a') : (c))
+#else
+# define ISLOWER(c) \
+ (('a' <= (c) && (c) <= 'i') \
+ || ('j' <= (c) && (c) <= 'r') \
+ || ('s' <= (c) && (c) <= 'z'))
+# define TOUPPER(c) (ISLOWER(c) ? ((c) | 0x40) : (c))
+#endif
+
+#define XOR(e, f) (((e) && !(f)) || (!(e) && (f)))
+int
+main ()
+{
+ int i;
+ for (i = 0; i < 256; i++)
+ if (XOR (islower (i), ISLOWER (i))
+ || toupper (i) != TOUPPER (i))
+ return 2;
+ return 0;
+}
+_ACEOF
+if ac_fn_c_try_run "$LINENO"; then :
+
+else
+ ac_cv_header_stdc=no
+fi
+rm -f core *.core core.conftest.* gmon.out bb.out conftest$ac_exeext \
+ conftest.$ac_objext conftest.beam conftest.$ac_ext
+fi
+
+fi
+fi
+{ $as_echo "$as_me:${as_lineno-$LINENO}: result: $ac_cv_header_stdc" >&5
+$as_echo "$ac_cv_header_stdc" >&6; }
+if test $ac_cv_header_stdc = yes; then
+
+$as_echo "#define STDC_HEADERS 1" >>confdefs.h
+
+fi
+
+# On IRIX 5.3, sys/types and inttypes.h are conflicting.
+for ac_header in sys/types.h sys/stat.h stdlib.h string.h memory.h strings.h \
+ inttypes.h stdint.h unistd.h
+do :
+ as_ac_Header=`$as_echo "ac_cv_header_$ac_header" | $as_tr_sh`
+ac_fn_c_check_header_compile "$LINENO" "$ac_header" "$as_ac_Header" "$ac_includes_default
+"
+eval as_val=\$$as_ac_Header
+ if test "x$as_val" = x""yes; then :
+ cat >>confdefs.h <<_ACEOF
+#define `$as_echo "HAVE_$ac_header" | $as_tr_cpp` 1
+_ACEOF
+
+fi
+
+done
+
+
+
+ ac_fn_c_check_header_mongrel "$LINENO" "minix/config.h" "ac_cv_header_minix_config_h" "$ac_includes_default"
+if test "x$ac_cv_header_minix_config_h" = x""yes; then :
+ MINIX=yes
+else
+ MINIX=
+fi
+
+
+ if test "$MINIX" = yes; then
+
+$as_echo "#define _POSIX_SOURCE 1" >>confdefs.h
+
+
+$as_echo "#define _POSIX_1_SOURCE 2" >>confdefs.h
+
+
+$as_echo "#define _MINIX 1" >>confdefs.h
+
+ fi
+
+
+ { $as_echo "$as_me:${as_lineno-$LINENO}: checking whether it is safe to define __EXTENSIONS__" >&5
+$as_echo_n "checking whether it is safe to define __EXTENSIONS__... " >&6; }
+if test "${ac_cv_safe_to_define___extensions__+set}" = set; then :
+ $as_echo_n "(cached) " >&6
+else
+ cat confdefs.h - <<_ACEOF >conftest.$ac_ext
+/* end confdefs.h. */
+
+# define __EXTENSIONS__ 1
+ $ac_includes_default
+int
+main ()
+{
+
+ ;
+ return 0;
+}
+_ACEOF
+if ac_fn_c_try_compile "$LINENO"; then :
+ ac_cv_safe_to_define___extensions__=yes
+else
+ ac_cv_safe_to_define___extensions__=no
+fi
+rm -f core conftest.err conftest.$ac_objext conftest.$ac_ext
+fi
+{ $as_echo "$as_me:${as_lineno-$LINENO}: result: $ac_cv_safe_to_define___extensions__" >&5
+$as_echo "$ac_cv_safe_to_define___extensions__" >&6; }
+ test $ac_cv_safe_to_define___extensions__ = yes &&
+ $as_echo "#define __EXTENSIONS__ 1" >>confdefs.h
+
+ $as_echo "#define _ALL_SOURCE 1" >>confdefs.h
+
+ $as_echo "#define _GNU_SOURCE 1" >>confdefs.h
+
+ $as_echo "#define _POSIX_PTHREAD_SEMANTICS 1" >>confdefs.h
+
+ $as_echo "#define _TANDEM_SOURCE 1" >>confdefs.h
+
+
+
+if test "x$enable_threads" = xyes; then
+ echo
+ echo "Threading support:"
+
+
+
+ac_ext=c
+ac_cpp='$CPP $CPPFLAGS'
+ac_compile='$CC -c $CFLAGS $CPPFLAGS conftest.$ac_ext >&5'
+ac_link='$CC -o conftest$ac_exeext $CFLAGS $CPPFLAGS $LDFLAGS conftest.$ac_ext $LIBS >&5'
+ac_compiler_gnu=$ac_cv_c_compiler_gnu
+
+acx_pthread_ok=no
+
+# We used to check for pthread.h first, but this fails if pthread.h
+# requires special compiler flags (e.g. on True64 or Sequent).
+# It gets checked for in the link test anyway.
+
+# First of all, check if the user has set any of the PTHREAD_LIBS,
+# etcetera environment variables, and if threads linking works using
+# them:
+if test x"$PTHREAD_LIBS$PTHREAD_CFLAGS" != x; then
+ save_CFLAGS="$CFLAGS"
+ CFLAGS="$CFLAGS $PTHREAD_CFLAGS"
+ save_LIBS="$LIBS"
+ LIBS="$PTHREAD_LIBS $LIBS"
+ { $as_echo "$as_me:${as_lineno-$LINENO}: checking for pthread_join in LIBS=$PTHREAD_LIBS with CFLAGS=$PTHREAD_CFLAGS" >&5
+$as_echo_n "checking for pthread_join in LIBS=$PTHREAD_LIBS with CFLAGS=$PTHREAD_CFLAGS... " >&6; }
+ cat confdefs.h - <<_ACEOF >conftest.$ac_ext
+/* end confdefs.h. */
+
+/* Override any GCC internal prototype to avoid an error.
+ Use char because int might match the return type of a GCC
+ builtin and then its argument prototype would still apply. */
+#ifdef __cplusplus
+extern "C"
+#endif
+char pthread_join ();
+int
+main ()
+{
+return pthread_join ();
+ ;
+ return 0;
+}
+_ACEOF
+if ac_fn_c_try_link "$LINENO"; then :
+ acx_pthread_ok=yes
+fi
+rm -f core conftest.err conftest.$ac_objext \
+ conftest$ac_exeext conftest.$ac_ext
+ { $as_echo "$as_me:${as_lineno-$LINENO}: result: $acx_pthread_ok" >&5
+$as_echo "$acx_pthread_ok" >&6; }
+ if test x"$acx_pthread_ok" = xno; then
+ PTHREAD_LIBS=""
+ PTHREAD_CFLAGS=""
+ fi
+ LIBS="$save_LIBS"
+ CFLAGS="$save_CFLAGS"
+fi
+
+# We must check for the threads library under a number of different
+# names; the ordering is very important because some systems
+# (e.g. DEC) have both -lpthread and -lpthreads, where one of the
+# libraries is broken (non-POSIX).
+
+# Create a list of thread flags to try. Items starting with a "-" are
+# C compiler flags, and other items are library names, except for "none"
+# which indicates that we try without any flags at all, and "pthread-config"
+# which is a program returning the flags for the Pth emulation library.
+
+acx_pthread_flags="pthreads none -Kthread -kthread lthread -pthread -pthreads -mthreads pthread --thread-safe -mt pthread-config"
+
+# The ordering *is* (sometimes) important. Some notes on the
+# individual items follow:
+
+# pthreads: AIX (must check this before -lpthread)
+# none: in case threads are in libc; should be tried before -Kthread and
+# other compiler flags to prevent continual compiler warnings
+# -Kthread: Sequent (threads in libc, but -Kthread needed for pthread.h)
+# -kthread: FreeBSD kernel threads (preferred to -pthread since SMP-able)
+# lthread: LinuxThreads port on FreeBSD (also preferred to -pthread)
+# -pthread: Linux/gcc (kernel threads), BSD/gcc (userland threads)
+# -pthreads: Solaris/gcc
+# -mthreads: Mingw32/gcc, Lynx/gcc
+# -mt: Sun Workshop C (may only link SunOS threads [-lthread], but it
+# doesn't hurt to check since this sometimes defines pthreads too;
+# also defines -D_REENTRANT)
+# ... -mt is also the pthreads flag for HP/aCC
+# pthread: Linux, etcetera
+# --thread-safe: KAI C++
+# pthread-config: use pthread-config program (for GNU Pth library)
+
+case "${host_cpu}-${host_os}" in
+ *solaris*)
+
+ # On Solaris (at least, for some versions), libc contains stubbed
+ # (non-functional) versions of the pthreads routines, so link-based
+ # tests will erroneously succeed. (We need to link with -pthreads/-mt/
+ # -lpthread.) (The stubs are missing pthread_cleanup_push, or rather
+ # a function called by this macro, so we could check for that, but
+ # who knows whether they'll stub that too in a future libc.) So,
+ # we'll just look for -pthreads and -lpthread first:
+
+ acx_pthread_flags="-pthreads pthread -mt -pthread $acx_pthread_flags"
+ ;;
+esac
+
+if test x"$acx_pthread_ok" = xno; then
+for flag in $acx_pthread_flags; do
+
+ case $flag in
+ none)
+ { $as_echo "$as_me:${as_lineno-$LINENO}: checking whether pthreads work without any flags" >&5
+$as_echo_n "checking whether pthreads work without any flags... " >&6; }
+ ;;
+
+ -*)
+ { $as_echo "$as_me:${as_lineno-$LINENO}: checking whether pthreads work with $flag" >&5
+$as_echo_n "checking whether pthreads work with $flag... " >&6; }
+ PTHREAD_CFLAGS="$flag"
+ ;;
+
+ pthread-config)
+ # Extract the first word of "pthread-config", so it can be a program name with args.
+set dummy pthread-config; ac_word=$2
+{ $as_echo "$as_me:${as_lineno-$LINENO}: checking for $ac_word" >&5
+$as_echo_n "checking for $ac_word... " >&6; }
+if test "${ac_cv_prog_acx_pthread_config+set}" = set; then :
+ $as_echo_n "(cached) " >&6
+else
+ if test -n "$acx_pthread_config"; then
+ ac_cv_prog_acx_pthread_config="$acx_pthread_config" # Let the user override the test.
+else
+as_save_IFS=$IFS; IFS=$PATH_SEPARATOR
+for as_dir in $PATH
+do
+ IFS=$as_save_IFS
+ test -z "$as_dir" && as_dir=.
+ for ac_exec_ext in '' $ac_executable_extensions; do
+ if { test -f "$as_dir/$ac_word$ac_exec_ext" && $as_test_x "$as_dir/$ac_word$ac_exec_ext"; }; then
+ ac_cv_prog_acx_pthread_config="yes"
+ $as_echo "$as_me:${as_lineno-$LINENO}: found $as_dir/$ac_word$ac_exec_ext" >&5
+ break 2
+ fi
+done
+ done
+IFS=$as_save_IFS
+
+ test -z "$ac_cv_prog_acx_pthread_config" && ac_cv_prog_acx_pthread_config="no"
+fi
+fi
+acx_pthread_config=$ac_cv_prog_acx_pthread_config
+if test -n "$acx_pthread_config"; then
+ { $as_echo "$as_me:${as_lineno-$LINENO}: result: $acx_pthread_config" >&5
+$as_echo "$acx_pthread_config" >&6; }
+else
+ { $as_echo "$as_me:${as_lineno-$LINENO}: result: no" >&5
+$as_echo "no" >&6; }
+fi
+
+
+ if test x"$acx_pthread_config" = xno; then continue; fi
+ PTHREAD_CFLAGS="`pthread-config --cflags`"
+ PTHREAD_LIBS="`pthread-config --ldflags` `pthread-config --libs`"
+ ;;
+
+ *)
+ { $as_echo "$as_me:${as_lineno-$LINENO}: checking for the pthreads library -l$flag" >&5
+$as_echo_n "checking for the pthreads library -l$flag... " >&6; }
+ PTHREAD_LIBS="-l$flag"
+ ;;
+ esac
+
+ save_LIBS="$LIBS"
+ save_CFLAGS="$CFLAGS"
+ LIBS="$PTHREAD_LIBS $LIBS"
+ CFLAGS="$CFLAGS $PTHREAD_CFLAGS"
+
+ # Check for various functions. We must include pthread.h,
+ # since some functions may be macros. (On the Sequent, we
+ # need a special flag -Kthread to make this header compile.)
+ # We check for pthread_join because it is in -lpthread on IRIX
+ # while pthread_create is in libc. We check for pthread_attr_init
+ # due to DEC craziness with -lpthreads. We check for
+ # pthread_cleanup_push because it is one of the few pthread
+ # functions on Solaris that doesn't have a non-functional libc stub.
+ # We try pthread_create on general principles.
+ cat confdefs.h - <<_ACEOF >conftest.$ac_ext
+/* end confdefs.h. */
+#include <pthread.h>
+int
+main ()
+{
+pthread_t th; pthread_join(th, 0);
+ pthread_attr_init(0); pthread_cleanup_push(0, 0);
+ pthread_create(0,0,0,0); pthread_cleanup_pop(0);
+ ;
+ return 0;
+}
+_ACEOF
+if ac_fn_c_try_link "$LINENO"; then :
+ acx_pthread_ok=yes
+fi
+rm -f core conftest.err conftest.$ac_objext \
+ conftest$ac_exeext conftest.$ac_ext
+
+ LIBS="$save_LIBS"
+ CFLAGS="$save_CFLAGS"
+
+ { $as_echo "$as_me:${as_lineno-$LINENO}: result: $acx_pthread_ok" >&5
+$as_echo "$acx_pthread_ok" >&6; }
+ if test "x$acx_pthread_ok" = xyes; then
+ break;
+ fi
+
+ PTHREAD_LIBS=""
+ PTHREAD_CFLAGS=""
+done
+fi
+
+# Various other checks:
+if test "x$acx_pthread_ok" = xyes; then
+ save_LIBS="$LIBS"
+ LIBS="$PTHREAD_LIBS $LIBS"
+ save_CFLAGS="$CFLAGS"
+ CFLAGS="$CFLAGS $PTHREAD_CFLAGS"
+
+ # Detect AIX lossage: JOINABLE attribute is called UNDETACHED.
+ { $as_echo "$as_me:${as_lineno-$LINENO}: checking for joinable pthread attribute" >&5
+$as_echo_n "checking for joinable pthread attribute... " >&6; }
+ attr_name=unknown
+ for attr in PTHREAD_CREATE_JOINABLE PTHREAD_CREATE_UNDETACHED; do
+ cat confdefs.h - <<_ACEOF >conftest.$ac_ext
+/* end confdefs.h. */
+#include <pthread.h>
+int
+main ()
+{
+int attr=$attr; return attr;
+ ;
+ return 0;
+}
+_ACEOF
+if ac_fn_c_try_link "$LINENO"; then :
+ attr_name=$attr; break
+fi
+rm -f core conftest.err conftest.$ac_objext \
+ conftest$ac_exeext conftest.$ac_ext
+ done
+ { $as_echo "$as_me:${as_lineno-$LINENO}: result: $attr_name" >&5
+$as_echo "$attr_name" >&6; }
+ if test "$attr_name" != PTHREAD_CREATE_JOINABLE; then
+
+cat >>confdefs.h <<_ACEOF
+#define PTHREAD_CREATE_JOINABLE $attr_name
+_ACEOF
+
+ fi
+
+ { $as_echo "$as_me:${as_lineno-$LINENO}: checking if more special flags are required for pthreads" >&5
+$as_echo_n "checking if more special flags are required for pthreads... " >&6; }
+ flag=no
+ case "${host_cpu}-${host_os}" in
+ *-aix* | *-freebsd* | *-darwin*) flag="-D_THREAD_SAFE";;
+ *solaris* | *-osf* | *-hpux*) flag="-D_REENTRANT";;
+ esac
+ { $as_echo "$as_me:${as_lineno-$LINENO}: result: ${flag}" >&5
+$as_echo "${flag}" >&6; }
+ if test "x$flag" != xno; then
+ PTHREAD_CFLAGS="$flag $PTHREAD_CFLAGS"
+ fi
+
+ LIBS="$save_LIBS"
+ CFLAGS="$save_CFLAGS"
+
+ # More AIX lossage: must compile with xlc_r or cc_r
+ if test x"$GCC" != xyes; then
+ for ac_prog in xlc_r cc_r
+do
+ # Extract the first word of "$ac_prog", so it can be a program name with args.
+set dummy $ac_prog; ac_word=$2
+{ $as_echo "$as_me:${as_lineno-$LINENO}: checking for $ac_word" >&5
+$as_echo_n "checking for $ac_word... " >&6; }
+if test "${ac_cv_prog_PTHREAD_CC+set}" = set; then :
+ $as_echo_n "(cached) " >&6
+else
+ if test -n "$PTHREAD_CC"; then
+ ac_cv_prog_PTHREAD_CC="$PTHREAD_CC" # Let the user override the test.
+else
+as_save_IFS=$IFS; IFS=$PATH_SEPARATOR
+for as_dir in $PATH
+do
+ IFS=$as_save_IFS
+ test -z "$as_dir" && as_dir=.
+ for ac_exec_ext in '' $ac_executable_extensions; do
+ if { test -f "$as_dir/$ac_word$ac_exec_ext" && $as_test_x "$as_dir/$ac_word$ac_exec_ext"; }; then
+ ac_cv_prog_PTHREAD_CC="$ac_prog"
+ $as_echo "$as_me:${as_lineno-$LINENO}: found $as_dir/$ac_word$ac_exec_ext" >&5
+ break 2
+ fi
+done
+ done
+IFS=$as_save_IFS
+
+fi
+fi
+PTHREAD_CC=$ac_cv_prog_PTHREAD_CC
+if test -n "$PTHREAD_CC"; then
+ { $as_echo "$as_me:${as_lineno-$LINENO}: result: $PTHREAD_CC" >&5
+$as_echo "$PTHREAD_CC" >&6; }
+else
+ { $as_echo "$as_me:${as_lineno-$LINENO}: result: no" >&5
+$as_echo "no" >&6; }
+fi
+
+
+ test -n "$PTHREAD_CC" && break
+done
+test -n "$PTHREAD_CC" || PTHREAD_CC="${CC}"
+
+ else
+ PTHREAD_CC=$CC
+ fi
+else
+ PTHREAD_CC="$CC"
+fi
+
+
+
+
+
+# Finally, execute ACTION-IF-FOUND/ACTION-IF-NOT-FOUND:
+if test x"$acx_pthread_ok" = xyes; then
+
+$as_echo "#define HAVE_PTHREAD 1" >>confdefs.h
+
+ :
+else
+ acx_pthread_ok=no
+
+fi
+ac_ext=c
+ac_cpp='$CPP $CPPFLAGS'
+ac_compile='$CC -c $CFLAGS $CPPFLAGS conftest.$ac_ext >&5'
+ac_link='$CC -o conftest$ac_exeext $CFLAGS $CPPFLAGS $LDFLAGS conftest.$ac_ext $LIBS >&5'
+ac_compiler_gnu=$ac_cv_c_compiler_gnu
+
+
+ LIBS="$LIBS $PTHREAD_LIBS"
+ AM_CFLAGS="$AM_CFLAGS $PTHREAD_CFLAGS"
+ CC="$PTHREAD_CC"
+fi
+
+echo
+echo "Initializing Libtool:"
+
+case `pwd` in
+ *\ * | *\ *)
+ { $as_echo "$as_me:${as_lineno-$LINENO}: WARNING: Libtool does not cope well with whitespace in \`pwd\`" >&5
+$as_echo "$as_me: WARNING: Libtool does not cope well with whitespace in \`pwd\`" >&2;} ;;
+esac
+
+
+
+macro_version='2.2.6'
+macro_revision='1.3012'
+
+
+
+
+
+
+
+
+
+
+
+
+
+ltmain="$ac_aux_dir/ltmain.sh"
+
+{ $as_echo "$as_me:${as_lineno-$LINENO}: checking for a sed that does not truncate output" >&5
+$as_echo_n "checking for a sed that does not truncate output... " >&6; }
+if test "${ac_cv_path_SED+set}" = set; then :
+ $as_echo_n "(cached) " >&6
+else
+ ac_script=s/aaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaa/bbbbbbbbbbbbbbbbbbbbbbbbbbbbbbbbb/
+ for ac_i in 1 2 3 4 5 6 7; do
+ ac_script="$ac_script$as_nl$ac_script"
+ done
+ echo "$ac_script" 2>/dev/null | sed 99q >conftest.sed
+ { ac_script=; unset ac_script;}
+ if test -z "$SED"; then
+ ac_path_SED_found=false
+ # Loop through the user's path and test for each of PROGNAME-LIST
+ as_save_IFS=$IFS; IFS=$PATH_SEPARATOR
+for as_dir in $PATH
+do
+ IFS=$as_save_IFS
+ test -z "$as_dir" && as_dir=.
+ for ac_prog in sed gsed; do
+ for ac_exec_ext in '' $ac_executable_extensions; do
+ ac_path_SED="$as_dir/$ac_prog$ac_exec_ext"
+ { test -f "$ac_path_SED" && $as_test_x "$ac_path_SED"; } || continue
+# Check for GNU ac_path_SED and select it if it is found.
+ # Check for GNU $ac_path_SED
+case `"$ac_path_SED" --version 2>&1` in
+*GNU*)
+ ac_cv_path_SED="$ac_path_SED" ac_path_SED_found=:;;
+*)
+ ac_count=0
+ $as_echo_n 0123456789 >"conftest.in"
+ while :
+ do
+ cat "conftest.in" "conftest.in" >"conftest.tmp"
+ mv "conftest.tmp" "conftest.in"
+ cp "conftest.in" "conftest.nl"
+ $as_echo '' >> "conftest.nl"
+ "$ac_path_SED" -f conftest.sed < "conftest.nl" >"conftest.out" 2>/dev/null || break
+ diff "conftest.out" "conftest.nl" >/dev/null 2>&1 || break
+ as_fn_arith $ac_count + 1 && ac_count=$as_val
+ if test $ac_count -gt ${ac_path_SED_max-0}; then
+ # Best one so far, save it but keep looking for a better one
+ ac_cv_path_SED="$ac_path_SED"
+ ac_path_SED_max=$ac_count
+ fi
+ # 10*(2^10) chars as input seems more than enough
+ test $ac_count -gt 10 && break
+ done
+ rm -f conftest.in conftest.tmp conftest.nl conftest.out;;
+esac
+
+ $ac_path_SED_found && break 3
+ done
+ done
+ done
+IFS=$as_save_IFS
+ if test -z "$ac_cv_path_SED"; then
+ as_fn_error "no acceptable sed could be found in \$PATH" "$LINENO" 5
+ fi
+else
+ ac_cv_path_SED=$SED
+fi
+
+fi
+{ $as_echo "$as_me:${as_lineno-$LINENO}: result: $ac_cv_path_SED" >&5
+$as_echo "$ac_cv_path_SED" >&6; }
+ SED="$ac_cv_path_SED"
+ rm -f conftest.sed
+
+test -z "$SED" && SED=sed
+Xsed="$SED -e 1s/^X//"
+
+
+
+
+
+
+
+
+
+
+
+{ $as_echo "$as_me:${as_lineno-$LINENO}: checking for fgrep" >&5
+$as_echo_n "checking for fgrep... " >&6; }
+if test "${ac_cv_path_FGREP+set}" = set; then :
+ $as_echo_n "(cached) " >&6
+else
+ if echo 'ab*c' | $GREP -F 'ab*c' >/dev/null 2>&1
+ then ac_cv_path_FGREP="$GREP -F"
+ else
+ if test -z "$FGREP"; then
+ ac_path_FGREP_found=false
+ # Loop through the user's path and test for each of PROGNAME-LIST
+ as_save_IFS=$IFS; IFS=$PATH_SEPARATOR
+for as_dir in $PATH$PATH_SEPARATOR/usr/xpg4/bin
+do
+ IFS=$as_save_IFS
+ test -z "$as_dir" && as_dir=.
+ for ac_prog in fgrep; do
+ for ac_exec_ext in '' $ac_executable_extensions; do
+ ac_path_FGREP="$as_dir/$ac_prog$ac_exec_ext"
+ { test -f "$ac_path_FGREP" && $as_test_x "$ac_path_FGREP"; } || continue
+# Check for GNU ac_path_FGREP and select it if it is found.
+ # Check for GNU $ac_path_FGREP
+case `"$ac_path_FGREP" --version 2>&1` in
+*GNU*)
+ ac_cv_path_FGREP="$ac_path_FGREP" ac_path_FGREP_found=:;;
+*)
+ ac_count=0
+ $as_echo_n 0123456789 >"conftest.in"
+ while :
+ do
+ cat "conftest.in" "conftest.in" >"conftest.tmp"
+ mv "conftest.tmp" "conftest.in"
+ cp "conftest.in" "conftest.nl"
+ $as_echo 'FGREP' >> "conftest.nl"
+ "$ac_path_FGREP" FGREP < "conftest.nl" >"conftest.out" 2>/dev/null || break
+ diff "conftest.out" "conftest.nl" >/dev/null 2>&1 || break
+ as_fn_arith $ac_count + 1 && ac_count=$as_val
+ if test $ac_count -gt ${ac_path_FGREP_max-0}; then
+ # Best one so far, save it but keep looking for a better one
+ ac_cv_path_FGREP="$ac_path_FGREP"
+ ac_path_FGREP_max=$ac_count
+ fi
+ # 10*(2^10) chars as input seems more than enough
+ test $ac_count -gt 10 && break
+ done
+ rm -f conftest.in conftest.tmp conftest.nl conftest.out;;
+esac
+
+ $ac_path_FGREP_found && break 3
+ done
+ done
+ done
+IFS=$as_save_IFS
+ if test -z "$ac_cv_path_FGREP"; then
+ as_fn_error "no acceptable fgrep could be found in $PATH$PATH_SEPARATOR/usr/xpg4/bin" "$LINENO" 5
+ fi
+else
+ ac_cv_path_FGREP=$FGREP
+fi
+
+ fi
+fi
+{ $as_echo "$as_me:${as_lineno-$LINENO}: result: $ac_cv_path_FGREP" >&5
+$as_echo "$ac_cv_path_FGREP" >&6; }
+ FGREP="$ac_cv_path_FGREP"
+
+
+test -z "$GREP" && GREP=grep
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+# Check whether --with-gnu-ld was given.
+if test "${with_gnu_ld+set}" = set; then :
+ withval=$with_gnu_ld; test "$withval" = no || with_gnu_ld=yes
+else
+ with_gnu_ld=no
+fi
+
+ac_prog=ld
+if test "$GCC" = yes; then
+ # Check if gcc -print-prog-name=ld gives a path.
+ { $as_echo "$as_me:${as_lineno-$LINENO}: checking for ld used by $CC" >&5
+$as_echo_n "checking for ld used by $CC... " >&6; }
+ case $host in
+ *-*-mingw*)
+ # gcc leaves a trailing carriage return which upsets mingw
+ ac_prog=`($CC -print-prog-name=ld) 2>&5 | tr -d '\015'` ;;
+ *)
+ ac_prog=`($CC -print-prog-name=ld) 2>&5` ;;
+ esac
+ case $ac_prog in
+ # Accept absolute paths.
+ [\\/]* | ?:[\\/]*)
+ re_direlt='/[^/][^/]*/\.\./'
+ # Canonicalize the pathname of ld
+ ac_prog=`$ECHO "$ac_prog"| $SED 's%\\\\%/%g'`
+ while $ECHO "$ac_prog" | $GREP "$re_direlt" > /dev/null 2>&1; do
+ ac_prog=`$ECHO $ac_prog| $SED "s%$re_direlt%/%"`
+ done
+ test -z "$LD" && LD="$ac_prog"
+ ;;
+ "")
+ # If it fails, then pretend we aren't using GCC.
+ ac_prog=ld
+ ;;
+ *)
+ # If it is relative, then search for the first ld in PATH.
+ with_gnu_ld=unknown
+ ;;
+ esac
+elif test "$with_gnu_ld" = yes; then
+ { $as_echo "$as_me:${as_lineno-$LINENO}: checking for GNU ld" >&5
+$as_echo_n "checking for GNU ld... " >&6; }
+else
+ { $as_echo "$as_me:${as_lineno-$LINENO}: checking for non-GNU ld" >&5
+$as_echo_n "checking for non-GNU ld... " >&6; }
+fi
+if test "${lt_cv_path_LD+set}" = set; then :
+ $as_echo_n "(cached) " >&6
+else
+ if test -z "$LD"; then
+ lt_save_ifs="$IFS"; IFS=$PATH_SEPARATOR
+ for ac_dir in $PATH; do
+ IFS="$lt_save_ifs"
+ test -z "$ac_dir" && ac_dir=.
+ if test -f "$ac_dir/$ac_prog" || test -f "$ac_dir/$ac_prog$ac_exeext"; then
+ lt_cv_path_LD="$ac_dir/$ac_prog"
+ # Check to see if the program is GNU ld. I'd rather use --version,
+ # but apparently some variants of GNU ld only accept -v.
+ # Break only if it was the GNU/non-GNU ld that we prefer.
+ case `"$lt_cv_path_LD" -v 2>&1 </dev/null` in
+ *GNU* | *'with BFD'*)
+ test "$with_gnu_ld" != no && break
+ ;;
+ *)
+ test "$with_gnu_ld" != yes && break
+ ;;
+ esac
+ fi
+ done
+ IFS="$lt_save_ifs"
+else
+ lt_cv_path_LD="$LD" # Let the user override the test with a path.
+fi
+fi
+
+LD="$lt_cv_path_LD"
+if test -n "$LD"; then
+ { $as_echo "$as_me:${as_lineno-$LINENO}: result: $LD" >&5
+$as_echo "$LD" >&6; }
+else
+ { $as_echo "$as_me:${as_lineno-$LINENO}: result: no" >&5
+$as_echo "no" >&6; }
+fi
+test -z "$LD" && as_fn_error "no acceptable ld found in \$PATH" "$LINENO" 5
+{ $as_echo "$as_me:${as_lineno-$LINENO}: checking if the linker ($LD) is GNU ld" >&5
+$as_echo_n "checking if the linker ($LD) is GNU ld... " >&6; }
+if test "${lt_cv_prog_gnu_ld+set}" = set; then :
+ $as_echo_n "(cached) " >&6
+else
+ # I'd rather use --version here, but apparently some GNU lds only accept -v.
+case `$LD -v 2>&1 </dev/null` in
+*GNU* | *'with BFD'*)
+ lt_cv_prog_gnu_ld=yes
+ ;;
+*)
+ lt_cv_prog_gnu_ld=no
+ ;;
+esac
+fi
+{ $as_echo "$as_me:${as_lineno-$LINENO}: result: $lt_cv_prog_gnu_ld" >&5
+$as_echo "$lt_cv_prog_gnu_ld" >&6; }
+with_gnu_ld=$lt_cv_prog_gnu_ld
+
+
+
+
+
+
+
+
+
+{ $as_echo "$as_me:${as_lineno-$LINENO}: checking for BSD- or MS-compatible name lister (nm)" >&5
+$as_echo_n "checking for BSD- or MS-compatible name lister (nm)... " >&6; }
+if test "${lt_cv_path_NM+set}" = set; then :
+ $as_echo_n "(cached) " >&6
+else
+ if test -n "$NM"; then
+ # Let the user override the test.
+ lt_cv_path_NM="$NM"
+else
+ lt_nm_to_check="${ac_tool_prefix}nm"
+ if test -n "$ac_tool_prefix" && test "$build" = "$host"; then
+ lt_nm_to_check="$lt_nm_to_check nm"
+ fi
+ for lt_tmp_nm in $lt_nm_to_check; do
+ lt_save_ifs="$IFS"; IFS=$PATH_SEPARATOR
+ for ac_dir in $PATH /usr/ccs/bin/elf /usr/ccs/bin /usr/ucb /bin; do
+ IFS="$lt_save_ifs"
+ test -z "$ac_dir" && ac_dir=.
+ tmp_nm="$ac_dir/$lt_tmp_nm"
+ if test -f "$tmp_nm" || test -f "$tmp_nm$ac_exeext" ; then
+ # Check to see if the nm accepts a BSD-compat flag.
+ # Adding the `sed 1q' prevents false positives on HP-UX, which says:
+ # nm: unknown option "B" ignored
+ # Tru64's nm complains that /dev/null is an invalid object file
+ case `"$tmp_nm" -B /dev/null 2>&1 | sed '1q'` in
+ */dev/null* | *'Invalid file or object type'*)
+ lt_cv_path_NM="$tmp_nm -B"
+ break
+ ;;
+ *)
+ case `"$tmp_nm" -p /dev/null 2>&1 | sed '1q'` in
+ */dev/null*)
+ lt_cv_path_NM="$tmp_nm -p"
+ break
+ ;;
+ *)
+ lt_cv_path_NM=${lt_cv_path_NM="$tmp_nm"} # keep the first match, but
+ continue # so that we can try to find one that supports BSD flags
+ ;;
+ esac
+ ;;
+ esac
+ fi
+ done
+ IFS="$lt_save_ifs"
+ done
+ : ${lt_cv_path_NM=no}
+fi
+fi
+{ $as_echo "$as_me:${as_lineno-$LINENO}: result: $lt_cv_path_NM" >&5
+$as_echo "$lt_cv_path_NM" >&6; }
+if test "$lt_cv_path_NM" != "no"; then
+ NM="$lt_cv_path_NM"
+else
+ # Didn't find any BSD compatible name lister, look for dumpbin.
+ if test -n "$ac_tool_prefix"; then
+ for ac_prog in "dumpbin -symbols" "link -dump -symbols"
+ do
+ # Extract the first word of "$ac_tool_prefix$ac_prog", so it can be a program name with args.
+set dummy $ac_tool_prefix$ac_prog; ac_word=$2
+{ $as_echo "$as_me:${as_lineno-$LINENO}: checking for $ac_word" >&5
+$as_echo_n "checking for $ac_word... " >&6; }
+if test "${ac_cv_prog_DUMPBIN+set}" = set; then :
+ $as_echo_n "(cached) " >&6
+else
+ if test -n "$DUMPBIN"; then
+ ac_cv_prog_DUMPBIN="$DUMPBIN" # Let the user override the test.
+else
+as_save_IFS=$IFS; IFS=$PATH_SEPARATOR
+for as_dir in $PATH
+do
+ IFS=$as_save_IFS
+ test -z "$as_dir" && as_dir=.
+ for ac_exec_ext in '' $ac_executable_extensions; do
+ if { test -f "$as_dir/$ac_word$ac_exec_ext" && $as_test_x "$as_dir/$ac_word$ac_exec_ext"; }; then
+ ac_cv_prog_DUMPBIN="$ac_tool_prefix$ac_prog"
+ $as_echo "$as_me:${as_lineno-$LINENO}: found $as_dir/$ac_word$ac_exec_ext" >&5
+ break 2
+ fi
+done
+ done
+IFS=$as_save_IFS
+
+fi
+fi
+DUMPBIN=$ac_cv_prog_DUMPBIN
+if test -n "$DUMPBIN"; then
+ { $as_echo "$as_me:${as_lineno-$LINENO}: result: $DUMPBIN" >&5
+$as_echo "$DUMPBIN" >&6; }
+else
+ { $as_echo "$as_me:${as_lineno-$LINENO}: result: no" >&5
+$as_echo "no" >&6; }
+fi
+
+
+ test -n "$DUMPBIN" && break
+ done
+fi
+if test -z "$DUMPBIN"; then
+ ac_ct_DUMPBIN=$DUMPBIN
+ for ac_prog in "dumpbin -symbols" "link -dump -symbols"
+do
+ # Extract the first word of "$ac_prog", so it can be a program name with args.
+set dummy $ac_prog; ac_word=$2
+{ $as_echo "$as_me:${as_lineno-$LINENO}: checking for $ac_word" >&5
+$as_echo_n "checking for $ac_word... " >&6; }
+if test "${ac_cv_prog_ac_ct_DUMPBIN+set}" = set; then :
+ $as_echo_n "(cached) " >&6
+else
+ if test -n "$ac_ct_DUMPBIN"; then
+ ac_cv_prog_ac_ct_DUMPBIN="$ac_ct_DUMPBIN" # Let the user override the test.
+else
+as_save_IFS=$IFS; IFS=$PATH_SEPARATOR
+for as_dir in $PATH
+do
+ IFS=$as_save_IFS
+ test -z "$as_dir" && as_dir=.
+ for ac_exec_ext in '' $ac_executable_extensions; do
+ if { test -f "$as_dir/$ac_word$ac_exec_ext" && $as_test_x "$as_dir/$ac_word$ac_exec_ext"; }; then
+ ac_cv_prog_ac_ct_DUMPBIN="$ac_prog"
+ $as_echo "$as_me:${as_lineno-$LINENO}: found $as_dir/$ac_word$ac_exec_ext" >&5
+ break 2
+ fi
+done
+ done
+IFS=$as_save_IFS
+
+fi
+fi
+ac_ct_DUMPBIN=$ac_cv_prog_ac_ct_DUMPBIN
+if test -n "$ac_ct_DUMPBIN"; then
+ { $as_echo "$as_me:${as_lineno-$LINENO}: result: $ac_ct_DUMPBIN" >&5
+$as_echo "$ac_ct_DUMPBIN" >&6; }
+else
+ { $as_echo "$as_me:${as_lineno-$LINENO}: result: no" >&5
+$as_echo "no" >&6; }
+fi
+
+
+ test -n "$ac_ct_DUMPBIN" && break
+done
+
+ if test "x$ac_ct_DUMPBIN" = x; then
+ DUMPBIN=":"
+ else
+ case $cross_compiling:$ac_tool_warned in
+yes:)
+{ $as_echo "$as_me:${as_lineno-$LINENO}: WARNING: using cross tools not prefixed with host triplet" >&5
+$as_echo "$as_me: WARNING: using cross tools not prefixed with host triplet" >&2;}
+ac_tool_warned=yes ;;
+esac
+ DUMPBIN=$ac_ct_DUMPBIN
+ fi
+fi
+
+
+ if test "$DUMPBIN" != ":"; then
+ NM="$DUMPBIN"
+ fi
+fi
+test -z "$NM" && NM=nm
+
+
+
+
+
+
+{ $as_echo "$as_me:${as_lineno-$LINENO}: checking the name lister ($NM) interface" >&5
+$as_echo_n "checking the name lister ($NM) interface... " >&6; }
+if test "${lt_cv_nm_interface+set}" = set; then :
+ $as_echo_n "(cached) " >&6
+else
+ lt_cv_nm_interface="BSD nm"
+ echo "int some_variable = 0;" > conftest.$ac_ext
+ (eval echo "\"\$as_me:7302: $ac_compile\"" >&5)
+ (eval "$ac_compile" 2>conftest.err)
+ cat conftest.err >&5
+ (eval echo "\"\$as_me:7305: $NM \\\"conftest.$ac_objext\\\"\"" >&5)
+ (eval "$NM \"conftest.$ac_objext\"" 2>conftest.err > conftest.out)
+ cat conftest.err >&5
+ (eval echo "\"\$as_me:7308: output\"" >&5)
+ cat conftest.out >&5
+ if $GREP 'External.*some_variable' conftest.out > /dev/null; then
+ lt_cv_nm_interface="MS dumpbin"
+ fi
+ rm -f conftest*
+fi
+{ $as_echo "$as_me:${as_lineno-$LINENO}: result: $lt_cv_nm_interface" >&5
+$as_echo "$lt_cv_nm_interface" >&6; }
+
+# find the maximum length of command line arguments
+{ $as_echo "$as_me:${as_lineno-$LINENO}: checking the maximum length of command line arguments" >&5
+$as_echo_n "checking the maximum length of command line arguments... " >&6; }
+if test "${lt_cv_sys_max_cmd_len+set}" = set; then :
+ $as_echo_n "(cached) " >&6
+else
+ i=0
+ teststring="ABCD"
+
+ case $build_os in
+ msdosdjgpp*)
+ # On DJGPP, this test can blow up pretty badly due to problems in libc
+ # (any single argument exceeding 2000 bytes causes a buffer overrun
+ # during glob expansion). Even if it were fixed, the result of this
+ # check would be larger than it should be.
+ lt_cv_sys_max_cmd_len=12288; # 12K is about right
+ ;;
+
+ gnu*)
+ # Under GNU Hurd, this test is not required because there is
+ # no limit to the length of command line arguments.
+ # Libtool will interpret -1 as no limit whatsoever
+ lt_cv_sys_max_cmd_len=-1;
+ ;;
+
+ cygwin* | mingw* | cegcc*)
+ # On Win9x/ME, this test blows up -- it succeeds, but takes
+ # about 5 minutes as the teststring grows exponentially.
+ # Worse, since 9x/ME are not pre-emptively multitasking,
+ # you end up with a "frozen" computer, even though with patience
+ # the test eventually succeeds (with a max line length of 256k).
+ # Instead, let's just punt: use the minimum linelength reported by
+ # all of the supported platforms: 8192 (on NT/2K/XP).
+ lt_cv_sys_max_cmd_len=8192;
+ ;;
+
+ amigaos*)
+ # On AmigaOS with pdksh, this test takes hours, literally.
+ # So we just punt and use a minimum line length of 8192.
+ lt_cv_sys_max_cmd_len=8192;
+ ;;
+
+ netbsd* | freebsd* | openbsd* | darwin* | dragonfly*)
+ # This has been around since 386BSD, at least. Likely further.
+ if test -x /sbin/sysctl; then
+ lt_cv_sys_max_cmd_len=`/sbin/sysctl -n kern.argmax`
+ elif test -x /usr/sbin/sysctl; then
+ lt_cv_sys_max_cmd_len=`/usr/sbin/sysctl -n kern.argmax`
+ else
+ lt_cv_sys_max_cmd_len=65536 # usable default for all BSDs
+ fi
+ # And add a safety zone
+ lt_cv_sys_max_cmd_len=`expr $lt_cv_sys_max_cmd_len \/ 4`
+ lt_cv_sys_max_cmd_len=`expr $lt_cv_sys_max_cmd_len \* 3`
+ ;;
+
+ interix*)
+ # We know the value 262144 and hardcode it with a safety zone (like BSD)
+ lt_cv_sys_max_cmd_len=196608
+ ;;
+
+ osf*)
+ # Dr. Hans Ekkehard Plesser reports seeing a kernel panic running configure
+ # due to this test when exec_disable_arg_limit is 1 on Tru64. It is not
+ # nice to cause kernel panics so lets avoid the loop below.
+ # First set a reasonable default.
+ lt_cv_sys_max_cmd_len=16384
+ #
+ if test -x /sbin/sysconfig; then
+ case `/sbin/sysconfig -q proc exec_disable_arg_limit` in
+ *1*) lt_cv_sys_max_cmd_len=-1 ;;
+ esac
+ fi
+ ;;
+ sco3.2v5*)
+ lt_cv_sys_max_cmd_len=102400
+ ;;
+ sysv5* | sco5v6* | sysv4.2uw2*)
+ kargmax=`grep ARG_MAX /etc/conf/cf.d/stune 2>/dev/null`
+ if test -n "$kargmax"; then
+ lt_cv_sys_max_cmd_len=`echo $kargmax | sed 's/.*[ ]//'`
+ else
+ lt_cv_sys_max_cmd_len=32768
+ fi
+ ;;
+ *)
+ lt_cv_sys_max_cmd_len=`(getconf ARG_MAX) 2> /dev/null`
+ if test -n "$lt_cv_sys_max_cmd_len"; then
+ lt_cv_sys_max_cmd_len=`expr $lt_cv_sys_max_cmd_len \/ 4`
+ lt_cv_sys_max_cmd_len=`expr $lt_cv_sys_max_cmd_len \* 3`
+ else
+ # Make teststring a little bigger before we do anything with it.
+ # a 1K string should be a reasonable start.
+ for i in 1 2 3 4 5 6 7 8 ; do
+ teststring=$teststring$teststring
+ done
+ SHELL=${SHELL-${CONFIG_SHELL-/bin/sh}}
+ # If test is not a shell built-in, we'll probably end up computing a
+ # maximum length that is only half of the actual maximum length, but
+ # we can't tell.
+ while { test "X"`$SHELL $0 --fallback-echo "X$teststring$teststring" 2>/dev/null` \
+ = "XX$teststring$teststring"; } >/dev/null 2>&1 &&
+ test $i != 17 # 1/2 MB should be enough
+ do
+ i=`expr $i + 1`
+ teststring=$teststring$teststring
+ done
+ # Only check the string length outside the loop.
+ lt_cv_sys_max_cmd_len=`expr "X$teststring" : ".*" 2>&1`
+ teststring=
+ # Add a significant safety factor because C++ compilers can tack on
+ # massive amounts of additional arguments before passing them to the
+ # linker. It appears as though 1/2 is a usable value.
+ lt_cv_sys_max_cmd_len=`expr $lt_cv_sys_max_cmd_len \/ 2`
+ fi
+ ;;
+ esac
+
+fi
+
+if test -n $lt_cv_sys_max_cmd_len ; then
+ { $as_echo "$as_me:${as_lineno-$LINENO}: result: $lt_cv_sys_max_cmd_len" >&5
+$as_echo "$lt_cv_sys_max_cmd_len" >&6; }
+else
+ { $as_echo "$as_me:${as_lineno-$LINENO}: result: none" >&5
+$as_echo "none" >&6; }
+fi
+max_cmd_len=$lt_cv_sys_max_cmd_len
+
+
+
+
+
+
+: ${CP="cp -f"}
+: ${MV="mv -f"}
+: ${RM="rm -f"}
+
+{ $as_echo "$as_me:${as_lineno-$LINENO}: checking whether the shell understands some XSI constructs" >&5
+$as_echo_n "checking whether the shell understands some XSI constructs... " >&6; }
+# Try some XSI features
+xsi_shell=no
+( _lt_dummy="a/b/c"
+ test "${_lt_dummy##*/},${_lt_dummy%/*},"${_lt_dummy%"$_lt_dummy"}, \
+ = c,a/b,, \
+ && eval 'test $(( 1 + 1 )) -eq 2 \
+ && test "${#_lt_dummy}" -eq 5' ) >/dev/null 2>&1 \
+ && xsi_shell=yes
+{ $as_echo "$as_me:${as_lineno-$LINENO}: result: $xsi_shell" >&5
+$as_echo "$xsi_shell" >&6; }
+
+
+{ $as_echo "$as_me:${as_lineno-$LINENO}: checking whether the shell understands \"+=\"" >&5
+$as_echo_n "checking whether the shell understands \"+=\"... " >&6; }
+lt_shell_append=no
+( foo=bar; set foo baz; eval "$1+=\$2" && test "$foo" = barbaz ) \
+ >/dev/null 2>&1 \
+ && lt_shell_append=yes
+{ $as_echo "$as_me:${as_lineno-$LINENO}: result: $lt_shell_append" >&5
+$as_echo "$lt_shell_append" >&6; }
+
+
+if ( (MAIL=60; unset MAIL) || exit) >/dev/null 2>&1; then
+ lt_unset=unset
+else
+ lt_unset=false
+fi
+
+
+
+
+
+# test EBCDIC or ASCII
+case `echo X|tr X '\101'` in
+ A) # ASCII based system
+ # \n is not interpreted correctly by Solaris 8 /usr/ucb/tr
+ lt_SP2NL='tr \040 \012'
+ lt_NL2SP='tr \015\012 \040\040'
+ ;;
+ *) # EBCDIC based system
+ lt_SP2NL='tr \100 \n'
+ lt_NL2SP='tr \r\n \100\100'
+ ;;
+esac
+
+
+
+
+
+
+
+
+
+{ $as_echo "$as_me:${as_lineno-$LINENO}: checking for $LD option to reload object files" >&5
+$as_echo_n "checking for $LD option to reload object files... " >&6; }
+if test "${lt_cv_ld_reload_flag+set}" = set; then :
+ $as_echo_n "(cached) " >&6
+else
+ lt_cv_ld_reload_flag='-r'
+fi
+{ $as_echo "$as_me:${as_lineno-$LINENO}: result: $lt_cv_ld_reload_flag" >&5
+$as_echo "$lt_cv_ld_reload_flag" >&6; }
+reload_flag=$lt_cv_ld_reload_flag
+case $reload_flag in
+"" | " "*) ;;
+*) reload_flag=" $reload_flag" ;;
+esac
+reload_cmds='$LD$reload_flag -o $output$reload_objs'
+case $host_os in
+ darwin*)
+ if test "$GCC" = yes; then
+ reload_cmds='$LTCC $LTCFLAGS -nostdlib ${wl}-r -o $output$reload_objs'
+ else
+ reload_cmds='$LD$reload_flag -o $output$reload_objs'
+ fi
+ ;;
+esac
+
+
+
+
+
+
+
+
+
+if test -n "$ac_tool_prefix"; then
+ # Extract the first word of "${ac_tool_prefix}objdump", so it can be a program name with args.
+set dummy ${ac_tool_prefix}objdump; ac_word=$2
+{ $as_echo "$as_me:${as_lineno-$LINENO}: checking for $ac_word" >&5
+$as_echo_n "checking for $ac_word... " >&6; }
+if test "${ac_cv_prog_OBJDUMP+set}" = set; then :
+ $as_echo_n "(cached) " >&6
+else
+ if test -n "$OBJDUMP"; then
+ ac_cv_prog_OBJDUMP="$OBJDUMP" # Let the user override the test.
+else
+as_save_IFS=$IFS; IFS=$PATH_SEPARATOR
+for as_dir in $PATH
+do
+ IFS=$as_save_IFS
+ test -z "$as_dir" && as_dir=.
+ for ac_exec_ext in '' $ac_executable_extensions; do
+ if { test -f "$as_dir/$ac_word$ac_exec_ext" && $as_test_x "$as_dir/$ac_word$ac_exec_ext"; }; then
+ ac_cv_prog_OBJDUMP="${ac_tool_prefix}objdump"
+ $as_echo "$as_me:${as_lineno-$LINENO}: found $as_dir/$ac_word$ac_exec_ext" >&5
+ break 2
+ fi
+done
+ done
+IFS=$as_save_IFS
+
+fi
+fi
+OBJDUMP=$ac_cv_prog_OBJDUMP
+if test -n "$OBJDUMP"; then
+ { $as_echo "$as_me:${as_lineno-$LINENO}: result: $OBJDUMP" >&5
+$as_echo "$OBJDUMP" >&6; }
+else
+ { $as_echo "$as_me:${as_lineno-$LINENO}: result: no" >&5
+$as_echo "no" >&6; }
+fi
+
+
+fi
+if test -z "$ac_cv_prog_OBJDUMP"; then
+ ac_ct_OBJDUMP=$OBJDUMP
+ # Extract the first word of "objdump", so it can be a program name with args.
+set dummy objdump; ac_word=$2
+{ $as_echo "$as_me:${as_lineno-$LINENO}: checking for $ac_word" >&5
+$as_echo_n "checking for $ac_word... " >&6; }
+if test "${ac_cv_prog_ac_ct_OBJDUMP+set}" = set; then :
+ $as_echo_n "(cached) " >&6
+else
+ if test -n "$ac_ct_OBJDUMP"; then
+ ac_cv_prog_ac_ct_OBJDUMP="$ac_ct_OBJDUMP" # Let the user override the test.
+else
+as_save_IFS=$IFS; IFS=$PATH_SEPARATOR
+for as_dir in $PATH
+do
+ IFS=$as_save_IFS
+ test -z "$as_dir" && as_dir=.
+ for ac_exec_ext in '' $ac_executable_extensions; do
+ if { test -f "$as_dir/$ac_word$ac_exec_ext" && $as_test_x "$as_dir/$ac_word$ac_exec_ext"; }; then
+ ac_cv_prog_ac_ct_OBJDUMP="objdump"
+ $as_echo "$as_me:${as_lineno-$LINENO}: found $as_dir/$ac_word$ac_exec_ext" >&5
+ break 2
+ fi
+done
+ done
+IFS=$as_save_IFS
+
+fi
+fi
+ac_ct_OBJDUMP=$ac_cv_prog_ac_ct_OBJDUMP
+if test -n "$ac_ct_OBJDUMP"; then
+ { $as_echo "$as_me:${as_lineno-$LINENO}: result: $ac_ct_OBJDUMP" >&5
+$as_echo "$ac_ct_OBJDUMP" >&6; }
+else
+ { $as_echo "$as_me:${as_lineno-$LINENO}: result: no" >&5
+$as_echo "no" >&6; }
+fi
+
+ if test "x$ac_ct_OBJDUMP" = x; then
+ OBJDUMP="false"
+ else
+ case $cross_compiling:$ac_tool_warned in
+yes:)
+{ $as_echo "$as_me:${as_lineno-$LINENO}: WARNING: using cross tools not prefixed with host triplet" >&5
+$as_echo "$as_me: WARNING: using cross tools not prefixed with host triplet" >&2;}
+ac_tool_warned=yes ;;
+esac
+ OBJDUMP=$ac_ct_OBJDUMP
+ fi
+else
+ OBJDUMP="$ac_cv_prog_OBJDUMP"
+fi
+
+test -z "$OBJDUMP" && OBJDUMP=objdump
+
+
+
+
+
+
+{ $as_echo "$as_me:${as_lineno-$LINENO}: checking how to recognize dependent libraries" >&5
+$as_echo_n "checking how to recognize dependent libraries... " >&6; }
+if test "${lt_cv_deplibs_check_method+set}" = set; then :
+ $as_echo_n "(cached) " >&6
+else
+ lt_cv_file_magic_cmd='$MAGIC_CMD'
+lt_cv_file_magic_test_file=
+lt_cv_deplibs_check_method='unknown'
+# Need to set the preceding variable on all platforms that support
+# interlibrary dependencies.
+# 'none' -- dependencies not supported.
+# `unknown' -- same as none, but documents that we really don't know.
+# 'pass_all' -- all dependencies passed with no checks.
+# 'test_compile' -- check by making test program.
+# 'file_magic [[regex]]' -- check by looking for files in library path
+# which responds to the $file_magic_cmd with a given extended regex.
+# If you have `file' or equivalent on your system and you're not sure
+# whether `pass_all' will *always* work, you probably want this one.
+
+case $host_os in
+aix[4-9]*)
+ lt_cv_deplibs_check_method=pass_all
+ ;;
+
+beos*)
+ lt_cv_deplibs_check_method=pass_all
+ ;;
+
+bsdi[45]*)
+ lt_cv_deplibs_check_method='file_magic ELF [0-9][0-9]*-bit [ML]SB (shared object|dynamic lib)'
+ lt_cv_file_magic_cmd='/usr/bin/file -L'
+ lt_cv_file_magic_test_file=/shlib/libc.so
+ ;;
+
+cygwin*)
+ # func_win32_libid is a shell function defined in ltmain.sh
+ lt_cv_deplibs_check_method='file_magic ^x86 archive import|^x86 DLL'
+ lt_cv_file_magic_cmd='func_win32_libid'
+ ;;
+
+mingw* | pw32*)
+ # Base MSYS/MinGW do not provide the 'file' command needed by
+ # func_win32_libid shell function, so use a weaker test based on 'objdump',
+ # unless we find 'file', for example because we are cross-compiling.
+ if ( file / ) >/dev/null 2>&1; then
+ lt_cv_deplibs_check_method='file_magic ^x86 archive import|^x86 DLL'
+ lt_cv_file_magic_cmd='func_win32_libid'
+ else
+ lt_cv_deplibs_check_method='file_magic file format pei*-i386(.*architecture: i386)?'
+ lt_cv_file_magic_cmd='$OBJDUMP -f'
+ fi
+ ;;
+
+cegcc)
+ # use the weaker test based on 'objdump'. See mingw*.
+ lt_cv_deplibs_check_method='file_magic file format pe-arm-.*little(.*architecture: arm)?'
+ lt_cv_file_magic_cmd='$OBJDUMP -f'
+ ;;
+
+darwin* | rhapsody*)
+ lt_cv_deplibs_check_method=pass_all
+ ;;
+
+freebsd* | dragonfly*)
+ if echo __ELF__ | $CC -E - | $GREP __ELF__ > /dev/null; then
+ case $host_cpu in
+ i*86 )
+ # Not sure whether the presence of OpenBSD here was a mistake.
+ # Let's accept both of them until this is cleared up.
+ lt_cv_deplibs_check_method='file_magic (FreeBSD|OpenBSD|DragonFly)/i[3-9]86 (compact )?demand paged shared library'
+ lt_cv_file_magic_cmd=/usr/bin/file
+ lt_cv_file_magic_test_file=`echo /usr/lib/libc.so.*`
+ ;;
+ esac
+ else
+ lt_cv_deplibs_check_method=pass_all
+ fi
+ ;;
+
+gnu*)
+ lt_cv_deplibs_check_method=pass_all
+ ;;
+
+hpux10.20* | hpux11*)
+ lt_cv_file_magic_cmd=/usr/bin/file
+ case $host_cpu in
+ ia64*)
+ lt_cv_deplibs_check_method='file_magic (s[0-9][0-9][0-9]|ELF-[0-9][0-9]) shared object file - IA64'
+ lt_cv_file_magic_test_file=/usr/lib/hpux32/libc.so
+ ;;
+ hppa*64*)
+ lt_cv_deplibs_check_method='file_magic (s[0-9][0-9][0-9]|ELF-[0-9][0-9]) shared object file - PA-RISC [0-9].[0-9]'
+ lt_cv_file_magic_test_file=/usr/lib/pa20_64/libc.sl
+ ;;
+ *)
+ lt_cv_deplibs_check_method='file_magic (s[0-9][0-9][0-9]|PA-RISC[0-9].[0-9]) shared library'
+ lt_cv_file_magic_test_file=/usr/lib/libc.sl
+ ;;
+ esac
+ ;;
+
+interix[3-9]*)
+ # PIC code is broken on Interix 3.x, that's why |\.a not |_pic\.a here
+ lt_cv_deplibs_check_method='match_pattern /lib[^/]+(\.so|\.a)$'
+ ;;
+
+irix5* | irix6* | nonstopux*)
+ case $LD in
+ *-32|*"-32 ") libmagic=32-bit;;
+ *-n32|*"-n32 ") libmagic=N32;;
+ *-64|*"-64 ") libmagic=64-bit;;
+ *) libmagic=never-match;;
+ esac
+ lt_cv_deplibs_check_method=pass_all
+ ;;
+
+# This must be Linux ELF.
+linux* | k*bsd*-gnu)
+ lt_cv_deplibs_check_method=pass_all
+ ;;
+
+netbsd*)
+ if echo __ELF__ | $CC -E - | $GREP __ELF__ > /dev/null; then
+ lt_cv_deplibs_check_method='match_pattern /lib[^/]+(\.so\.[0-9]+\.[0-9]+|_pic\.a)$'
+ else
+ lt_cv_deplibs_check_method='match_pattern /lib[^/]+(\.so|_pic\.a)$'
+ fi
+ ;;
+
+newos6*)
+ lt_cv_deplibs_check_method='file_magic ELF [0-9][0-9]*-bit [ML]SB (executable|dynamic lib)'
+ lt_cv_file_magic_cmd=/usr/bin/file
+ lt_cv_file_magic_test_file=/usr/lib/libnls.so
+ ;;
+
+*nto* | *qnx*)
+ lt_cv_deplibs_check_method=pass_all
+ ;;
+
+openbsd*)
+ if test -z "`echo __ELF__ | $CC -E - | $GREP __ELF__`" || test "$host_os-$host_cpu" = "openbsd2.8-powerpc"; then
+ lt_cv_deplibs_check_method='match_pattern /lib[^/]+(\.so\.[0-9]+\.[0-9]+|\.so|_pic\.a)$'
+ else
+ lt_cv_deplibs_check_method='match_pattern /lib[^/]+(\.so\.[0-9]+\.[0-9]+|_pic\.a)$'
+ fi
+ ;;
+
+osf3* | osf4* | osf5*)
+ lt_cv_deplibs_check_method=pass_all
+ ;;
+
+rdos*)
+ lt_cv_deplibs_check_method=pass_all
+ ;;
+
+solaris*)
+ lt_cv_deplibs_check_method=pass_all
+ ;;
+
+sysv5* | sco3.2v5* | sco5v6* | unixware* | OpenUNIX* | sysv4*uw2*)
+ lt_cv_deplibs_check_method=pass_all
+ ;;
+
+sysv4 | sysv4.3*)
+ case $host_vendor in
+ motorola)
+ lt_cv_deplibs_check_method='file_magic ELF [0-9][0-9]*-bit [ML]SB (shared object|dynamic lib) M[0-9][0-9]* Version [0-9]'
+ lt_cv_file_magic_test_file=`echo /usr/lib/libc.so*`
+ ;;
+ ncr)
+ lt_cv_deplibs_check_method=pass_all
+ ;;
+ sequent)
+ lt_cv_file_magic_cmd='/bin/file'
+ lt_cv_deplibs_check_method='file_magic ELF [0-9][0-9]*-bit [LM]SB (shared object|dynamic lib )'
+ ;;
+ sni)
+ lt_cv_file_magic_cmd='/bin/file'
+ lt_cv_deplibs_check_method="file_magic ELF [0-9][0-9]*-bit [LM]SB dynamic lib"
+ lt_cv_file_magic_test_file=/lib/libc.so
+ ;;
+ siemens)
+ lt_cv_deplibs_check_method=pass_all
+ ;;
+ pc)
+ lt_cv_deplibs_check_method=pass_all
+ ;;
+ esac
+ ;;
+
+tpf*)
+ lt_cv_deplibs_check_method=pass_all
+ ;;
+esac
+
+fi
+{ $as_echo "$as_me:${as_lineno-$LINENO}: result: $lt_cv_deplibs_check_method" >&5
+$as_echo "$lt_cv_deplibs_check_method" >&6; }
+file_magic_cmd=$lt_cv_file_magic_cmd
+deplibs_check_method=$lt_cv_deplibs_check_method
+test -z "$deplibs_check_method" && deplibs_check_method=unknown
+
+
+
+
+
+
+
+
+
+
+
+
+if test -n "$ac_tool_prefix"; then
+ # Extract the first word of "${ac_tool_prefix}ar", so it can be a program name with args.
+set dummy ${ac_tool_prefix}ar; ac_word=$2
+{ $as_echo "$as_me:${as_lineno-$LINENO}: checking for $ac_word" >&5
+$as_echo_n "checking for $ac_word... " >&6; }
+if test "${ac_cv_prog_AR+set}" = set; then :
+ $as_echo_n "(cached) " >&6
+else
+ if test -n "$AR"; then
+ ac_cv_prog_AR="$AR" # Let the user override the test.
+else
+as_save_IFS=$IFS; IFS=$PATH_SEPARATOR
+for as_dir in $PATH
+do
+ IFS=$as_save_IFS
+ test -z "$as_dir" && as_dir=.
+ for ac_exec_ext in '' $ac_executable_extensions; do
+ if { test -f "$as_dir/$ac_word$ac_exec_ext" && $as_test_x "$as_dir/$ac_word$ac_exec_ext"; }; then
+ ac_cv_prog_AR="${ac_tool_prefix}ar"
+ $as_echo "$as_me:${as_lineno-$LINENO}: found $as_dir/$ac_word$ac_exec_ext" >&5
+ break 2
+ fi
+done
+ done
+IFS=$as_save_IFS
+
+fi
+fi
+AR=$ac_cv_prog_AR
+if test -n "$AR"; then
+ { $as_echo "$as_me:${as_lineno-$LINENO}: result: $AR" >&5
+$as_echo "$AR" >&6; }
+else
+ { $as_echo "$as_me:${as_lineno-$LINENO}: result: no" >&5
+$as_echo "no" >&6; }
+fi
+
+
+fi
+if test -z "$ac_cv_prog_AR"; then
+ ac_ct_AR=$AR
+ # Extract the first word of "ar", so it can be a program name with args.
+set dummy ar; ac_word=$2
+{ $as_echo "$as_me:${as_lineno-$LINENO}: checking for $ac_word" >&5
+$as_echo_n "checking for $ac_word... " >&6; }
+if test "${ac_cv_prog_ac_ct_AR+set}" = set; then :
+ $as_echo_n "(cached) " >&6
+else
+ if test -n "$ac_ct_AR"; then
+ ac_cv_prog_ac_ct_AR="$ac_ct_AR" # Let the user override the test.
+else
+as_save_IFS=$IFS; IFS=$PATH_SEPARATOR
+for as_dir in $PATH
+do
+ IFS=$as_save_IFS
+ test -z "$as_dir" && as_dir=.
+ for ac_exec_ext in '' $ac_executable_extensions; do
+ if { test -f "$as_dir/$ac_word$ac_exec_ext" && $as_test_x "$as_dir/$ac_word$ac_exec_ext"; }; then
+ ac_cv_prog_ac_ct_AR="ar"
+ $as_echo "$as_me:${as_lineno-$LINENO}: found $as_dir/$ac_word$ac_exec_ext" >&5
+ break 2
+ fi
+done
+ done
+IFS=$as_save_IFS
+
+fi
+fi
+ac_ct_AR=$ac_cv_prog_ac_ct_AR
+if test -n "$ac_ct_AR"; then
+ { $as_echo "$as_me:${as_lineno-$LINENO}: result: $ac_ct_AR" >&5
+$as_echo "$ac_ct_AR" >&6; }
+else
+ { $as_echo "$as_me:${as_lineno-$LINENO}: result: no" >&5
+$as_echo "no" >&6; }
+fi
+
+ if test "x$ac_ct_AR" = x; then
+ AR="false"
+ else
+ case $cross_compiling:$ac_tool_warned in
+yes:)
+{ $as_echo "$as_me:${as_lineno-$LINENO}: WARNING: using cross tools not prefixed with host triplet" >&5
+$as_echo "$as_me: WARNING: using cross tools not prefixed with host triplet" >&2;}
+ac_tool_warned=yes ;;
+esac
+ AR=$ac_ct_AR
+ fi
+else
+ AR="$ac_cv_prog_AR"
+fi
+
+test -z "$AR" && AR=ar
+test -z "$AR_FLAGS" && AR_FLAGS=cru
+
+
+
+
+
+
+
+
+
+
+
+if test -n "$ac_tool_prefix"; then
+ # Extract the first word of "${ac_tool_prefix}strip", so it can be a program name with args.
+set dummy ${ac_tool_prefix}strip; ac_word=$2
+{ $as_echo "$as_me:${as_lineno-$LINENO}: checking for $ac_word" >&5
+$as_echo_n "checking for $ac_word... " >&6; }
+if test "${ac_cv_prog_STRIP+set}" = set; then :
+ $as_echo_n "(cached) " >&6
+else
+ if test -n "$STRIP"; then
+ ac_cv_prog_STRIP="$STRIP" # Let the user override the test.
+else
+as_save_IFS=$IFS; IFS=$PATH_SEPARATOR
+for as_dir in $PATH
+do
+ IFS=$as_save_IFS
+ test -z "$as_dir" && as_dir=.
+ for ac_exec_ext in '' $ac_executable_extensions; do
+ if { test -f "$as_dir/$ac_word$ac_exec_ext" && $as_test_x "$as_dir/$ac_word$ac_exec_ext"; }; then
+ ac_cv_prog_STRIP="${ac_tool_prefix}strip"
+ $as_echo "$as_me:${as_lineno-$LINENO}: found $as_dir/$ac_word$ac_exec_ext" >&5
+ break 2
+ fi
+done
+ done
+IFS=$as_save_IFS
+
+fi
+fi
+STRIP=$ac_cv_prog_STRIP
+if test -n "$STRIP"; then
+ { $as_echo "$as_me:${as_lineno-$LINENO}: result: $STRIP" >&5
+$as_echo "$STRIP" >&6; }
+else
+ { $as_echo "$as_me:${as_lineno-$LINENO}: result: no" >&5
+$as_echo "no" >&6; }
+fi
+
+
+fi
+if test -z "$ac_cv_prog_STRIP"; then
+ ac_ct_STRIP=$STRIP
+ # Extract the first word of "strip", so it can be a program name with args.
+set dummy strip; ac_word=$2
+{ $as_echo "$as_me:${as_lineno-$LINENO}: checking for $ac_word" >&5
+$as_echo_n "checking for $ac_word... " >&6; }
+if test "${ac_cv_prog_ac_ct_STRIP+set}" = set; then :
+ $as_echo_n "(cached) " >&6
+else
+ if test -n "$ac_ct_STRIP"; then
+ ac_cv_prog_ac_ct_STRIP="$ac_ct_STRIP" # Let the user override the test.
+else
+as_save_IFS=$IFS; IFS=$PATH_SEPARATOR
+for as_dir in $PATH
+do
+ IFS=$as_save_IFS
+ test -z "$as_dir" && as_dir=.
+ for ac_exec_ext in '' $ac_executable_extensions; do
+ if { test -f "$as_dir/$ac_word$ac_exec_ext" && $as_test_x "$as_dir/$ac_word$ac_exec_ext"; }; then
+ ac_cv_prog_ac_ct_STRIP="strip"
+ $as_echo "$as_me:${as_lineno-$LINENO}: found $as_dir/$ac_word$ac_exec_ext" >&5
+ break 2
+ fi
+done
+ done
+IFS=$as_save_IFS
+
+fi
+fi
+ac_ct_STRIP=$ac_cv_prog_ac_ct_STRIP
+if test -n "$ac_ct_STRIP"; then
+ { $as_echo "$as_me:${as_lineno-$LINENO}: result: $ac_ct_STRIP" >&5
+$as_echo "$ac_ct_STRIP" >&6; }
+else
+ { $as_echo "$as_me:${as_lineno-$LINENO}: result: no" >&5
+$as_echo "no" >&6; }
+fi
+
+ if test "x$ac_ct_STRIP" = x; then
+ STRIP=":"
+ else
+ case $cross_compiling:$ac_tool_warned in
+yes:)
+{ $as_echo "$as_me:${as_lineno-$LINENO}: WARNING: using cross tools not prefixed with host triplet" >&5
+$as_echo "$as_me: WARNING: using cross tools not prefixed with host triplet" >&2;}
+ac_tool_warned=yes ;;
+esac
+ STRIP=$ac_ct_STRIP
+ fi
+else
+ STRIP="$ac_cv_prog_STRIP"
+fi
+
+test -z "$STRIP" && STRIP=:
+
+
+
+
+
+
+if test -n "$ac_tool_prefix"; then
+ # Extract the first word of "${ac_tool_prefix}ranlib", so it can be a program name with args.
+set dummy ${ac_tool_prefix}ranlib; ac_word=$2
+{ $as_echo "$as_me:${as_lineno-$LINENO}: checking for $ac_word" >&5
+$as_echo_n "checking for $ac_word... " >&6; }
+if test "${ac_cv_prog_RANLIB+set}" = set; then :
+ $as_echo_n "(cached) " >&6
+else
+ if test -n "$RANLIB"; then
+ ac_cv_prog_RANLIB="$RANLIB" # Let the user override the test.
+else
+as_save_IFS=$IFS; IFS=$PATH_SEPARATOR
+for as_dir in $PATH
+do
+ IFS=$as_save_IFS
+ test -z "$as_dir" && as_dir=.
+ for ac_exec_ext in '' $ac_executable_extensions; do
+ if { test -f "$as_dir/$ac_word$ac_exec_ext" && $as_test_x "$as_dir/$ac_word$ac_exec_ext"; }; then
+ ac_cv_prog_RANLIB="${ac_tool_prefix}ranlib"
+ $as_echo "$as_me:${as_lineno-$LINENO}: found $as_dir/$ac_word$ac_exec_ext" >&5
+ break 2
+ fi
+done
+ done
+IFS=$as_save_IFS
+
+fi
+fi
+RANLIB=$ac_cv_prog_RANLIB
+if test -n "$RANLIB"; then
+ { $as_echo "$as_me:${as_lineno-$LINENO}: result: $RANLIB" >&5
+$as_echo "$RANLIB" >&6; }
+else
+ { $as_echo "$as_me:${as_lineno-$LINENO}: result: no" >&5
+$as_echo "no" >&6; }
+fi
+
+
+fi
+if test -z "$ac_cv_prog_RANLIB"; then
+ ac_ct_RANLIB=$RANLIB
+ # Extract the first word of "ranlib", so it can be a program name with args.
+set dummy ranlib; ac_word=$2
+{ $as_echo "$as_me:${as_lineno-$LINENO}: checking for $ac_word" >&5
+$as_echo_n "checking for $ac_word... " >&6; }
+if test "${ac_cv_prog_ac_ct_RANLIB+set}" = set; then :
+ $as_echo_n "(cached) " >&6
+else
+ if test -n "$ac_ct_RANLIB"; then
+ ac_cv_prog_ac_ct_RANLIB="$ac_ct_RANLIB" # Let the user override the test.
+else
+as_save_IFS=$IFS; IFS=$PATH_SEPARATOR
+for as_dir in $PATH
+do
+ IFS=$as_save_IFS
+ test -z "$as_dir" && as_dir=.
+ for ac_exec_ext in '' $ac_executable_extensions; do
+ if { test -f "$as_dir/$ac_word$ac_exec_ext" && $as_test_x "$as_dir/$ac_word$ac_exec_ext"; }; then
+ ac_cv_prog_ac_ct_RANLIB="ranlib"
+ $as_echo "$as_me:${as_lineno-$LINENO}: found $as_dir/$ac_word$ac_exec_ext" >&5
+ break 2
+ fi
+done
+ done
+IFS=$as_save_IFS
+
+fi
+fi
+ac_ct_RANLIB=$ac_cv_prog_ac_ct_RANLIB
+if test -n "$ac_ct_RANLIB"; then
+ { $as_echo "$as_me:${as_lineno-$LINENO}: result: $ac_ct_RANLIB" >&5
+$as_echo "$ac_ct_RANLIB" >&6; }
+else
+ { $as_echo "$as_me:${as_lineno-$LINENO}: result: no" >&5
+$as_echo "no" >&6; }
+fi
+
+ if test "x$ac_ct_RANLIB" = x; then
+ RANLIB=":"
+ else
+ case $cross_compiling:$ac_tool_warned in
+yes:)
+{ $as_echo "$as_me:${as_lineno-$LINENO}: WARNING: using cross tools not prefixed with host triplet" >&5
+$as_echo "$as_me: WARNING: using cross tools not prefixed with host triplet" >&2;}
+ac_tool_warned=yes ;;
+esac
+ RANLIB=$ac_ct_RANLIB
+ fi
+else
+ RANLIB="$ac_cv_prog_RANLIB"
+fi
+
+test -z "$RANLIB" && RANLIB=:
+
+
+
+
+
+
+# Determine commands to create old-style static archives.
+old_archive_cmds='$AR $AR_FLAGS $oldlib$oldobjs'
+old_postinstall_cmds='chmod 644 $oldlib'
+old_postuninstall_cmds=
+
+if test -n "$RANLIB"; then
+ case $host_os in
+ openbsd*)
+ old_postinstall_cmds="$old_postinstall_cmds~\$RANLIB -t \$oldlib"
+ ;;
+ *)
+ old_postinstall_cmds="$old_postinstall_cmds~\$RANLIB \$oldlib"
+ ;;
+ esac
+ old_archive_cmds="$old_archive_cmds~\$RANLIB \$oldlib"
+fi
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+# If no C compiler was specified, use CC.
+LTCC=${LTCC-"$CC"}
+
+# If no C compiler flags were specified, use CFLAGS.
+LTCFLAGS=${LTCFLAGS-"$CFLAGS"}
+
+# Allow CC to be a program name with arguments.
+compiler=$CC
+
+
+# Check for command to grab the raw symbol name followed by C symbol from nm.
+{ $as_echo "$as_me:${as_lineno-$LINENO}: checking command to parse $NM output from $compiler object" >&5
+$as_echo_n "checking command to parse $NM output from $compiler object... " >&6; }
+if test "${lt_cv_sys_global_symbol_pipe+set}" = set; then :
+ $as_echo_n "(cached) " >&6
+else
+
+# These are sane defaults that work on at least a few old systems.
+# [They come from Ultrix. What could be older than Ultrix?!! ;)]
+
+# Character class describing NM global symbol codes.
+symcode='[BCDEGRST]'
+
+# Regexp to match symbols that can be accessed directly from C.
+sympat='\([_A-Za-z][_A-Za-z0-9]*\)'
+
+# Define system-specific variables.
+case $host_os in
+aix*)
+ symcode='[BCDT]'
+ ;;
+cygwin* | mingw* | pw32* | cegcc*)
+ symcode='[ABCDGISTW]'
+ ;;
+hpux*)
+ if test "$host_cpu" = ia64; then
+ symcode='[ABCDEGRST]'
+ fi
+ ;;
+irix* | nonstopux*)
+ symcode='[BCDEGRST]'
+ ;;
+osf*)
+ symcode='[BCDEGQRST]'
+ ;;
+solaris*)
+ symcode='[BDRT]'
+ ;;
+sco3.2v5*)
+ symcode='[DT]'
+ ;;
+sysv4.2uw2*)
+ symcode='[DT]'
+ ;;
+sysv5* | sco5v6* | unixware* | OpenUNIX*)
+ symcode='[ABDT]'
+ ;;
+sysv4)
+ symcode='[DFNSTU]'
+ ;;
+esac
+
+# If we're using GNU nm, then use its standard symbol codes.
+case `$NM -V 2>&1` in
+*GNU* | *'with BFD'*)
+ symcode='[ABCDGIRSTW]' ;;
+esac
+
+# Transform an extracted symbol line into a proper C declaration.
+# Some systems (esp. on ia64) link data and code symbols differently,
+# so use this general approach.
+lt_cv_sys_global_symbol_to_cdecl="sed -n -e 's/^T .* \(.*\)$/extern int \1();/p' -e 's/^$symcode* .* \(.*\)$/extern char \1;/p'"
+
+# Transform an extracted symbol line into symbol name and symbol address
+lt_cv_sys_global_symbol_to_c_name_address="sed -n -e 's/^: \([^ ]*\) $/ {\\\"\1\\\", (void *) 0},/p' -e 's/^$symcode* \([^ ]*\) \([^ ]*\)$/ {\"\2\", (void *) \&\2},/p'"
+lt_cv_sys_global_symbol_to_c_name_address_lib_prefix="sed -n -e 's/^: \([^ ]*\) $/ {\\\"\1\\\", (void *) 0},/p' -e 's/^$symcode* \([^ ]*\) \(lib[^ ]*\)$/ {\"\2\", (void *) \&\2},/p' -e 's/^$symcode* \([^ ]*\) \([^ ]*\)$/ {\"lib\2\", (void *) \&\2},/p'"
+
+# Handle CRLF in mingw tool chain
+opt_cr=
+case $build_os in
+mingw*)
+ opt_cr=`$ECHO 'x\{0,1\}' | tr x '\015'` # option cr in regexp
+ ;;
+esac
+
+# Try without a prefix underscore, then with it.
+for ac_symprfx in "" "_"; do
+
+ # Transform symcode, sympat, and symprfx into a raw symbol and a C symbol.
+ symxfrm="\\1 $ac_symprfx\\2 \\2"
+
+ # Write the raw and C identifiers.
+ if test "$lt_cv_nm_interface" = "MS dumpbin"; then
+ # Fake it for dumpbin and say T for any non-static function
+ # and D for any global variable.
+ # Also find C++ and __fastcall symbols from MSVC++,
+ # which start with @ or ?.
+ lt_cv_sys_global_symbol_pipe="$AWK '"\
+" {last_section=section; section=\$ 3};"\
+" /Section length .*#relocs.*(pick any)/{hide[last_section]=1};"\
+" \$ 0!~/External *\|/{next};"\
+" / 0+ UNDEF /{next}; / UNDEF \([^|]\)*()/{next};"\
+" {if(hide[section]) next};"\
+" {f=0}; \$ 0~/\(\).*\|/{f=1}; {printf f ? \"T \" : \"D \"};"\
+" {split(\$ 0, a, /\||\r/); split(a[2], s)};"\
+" s[1]~/^[@?]/{print s[1], s[1]; next};"\
+" s[1]~prfx {split(s[1],t,\"@\"); print t[1], substr(t[1],length(prfx))}"\
+" ' prfx=^$ac_symprfx"
+ else
+ lt_cv_sys_global_symbol_pipe="sed -n -e 's/^.*[ ]\($symcode$symcode*\)[ ][ ]*$ac_symprfx$sympat$opt_cr$/$symxfrm/p'"
+ fi
+
+ # Check to see that the pipe works correctly.
+ pipe_works=no
+
+ rm -f conftest*
+ cat > conftest.$ac_ext <<_LT_EOF
+#ifdef __cplusplus
+extern "C" {
+#endif
+char nm_test_var;
+void nm_test_func(void);
+void nm_test_func(void){}
+#ifdef __cplusplus
+}
+#endif
+int main(){nm_test_var='a';nm_test_func();return(0);}
+_LT_EOF
+
+ if { { eval echo "\"\$as_me\":${as_lineno-$LINENO}: \"$ac_compile\""; } >&5
+ (eval $ac_compile) 2>&5
+ ac_status=$?
+ $as_echo "$as_me:${as_lineno-$LINENO}: \$? = $ac_status" >&5
+ test $ac_status = 0; }; then
+ # Now try to grab the symbols.
+ nlist=conftest.nm
+ if { { eval echo "\"\$as_me\":${as_lineno-$LINENO}: \"$NM conftest.$ac_objext \| $lt_cv_sys_global_symbol_pipe \> $nlist\""; } >&5
+ (eval $NM conftest.$ac_objext \| $lt_cv_sys_global_symbol_pipe \> $nlist) 2>&5
+ ac_status=$?
+ $as_echo "$as_me:${as_lineno-$LINENO}: \$? = $ac_status" >&5
+ test $ac_status = 0; } && test -s "$nlist"; then
+ # Try sorting and uniquifying the output.
+ if sort "$nlist" | uniq > "$nlist"T; then
+ mv -f "$nlist"T "$nlist"
+ else
+ rm -f "$nlist"T
+ fi
+
+ # Make sure that we snagged all the symbols we need.
+ if $GREP ' nm_test_var$' "$nlist" >/dev/null; then
+ if $GREP ' nm_test_func$' "$nlist" >/dev/null; then
+ cat <<_LT_EOF > conftest.$ac_ext
+#ifdef __cplusplus
+extern "C" {
+#endif
+
+_LT_EOF
+ # Now generate the symbol file.
+ eval "$lt_cv_sys_global_symbol_to_cdecl"' < "$nlist" | $GREP -v main >> conftest.$ac_ext'
+
+ cat <<_LT_EOF >> conftest.$ac_ext
+
+/* The mapping between symbol names and symbols. */
+const struct {
+ const char *name;
+ void *address;
+}
+lt__PROGRAM__LTX_preloaded_symbols[] =
+{
+ { "@PROGRAM@", (void *) 0 },
+_LT_EOF
+ $SED "s/^$symcode$symcode* \(.*\) \(.*\)$/ {\"\2\", (void *) \&\2},/" < "$nlist" | $GREP -v main >> conftest.$ac_ext
+ cat <<\_LT_EOF >> conftest.$ac_ext
+ {0, (void *) 0}
+};
+
+/* This works around a problem in FreeBSD linker */
+#ifdef FREEBSD_WORKAROUND
+static const void *lt_preloaded_setup() {
+ return lt__PROGRAM__LTX_preloaded_symbols;
+}
+#endif
+
+#ifdef __cplusplus
+}
+#endif
+_LT_EOF
+ # Now try linking the two files.
+ mv conftest.$ac_objext conftstm.$ac_objext
+ lt_save_LIBS="$LIBS"
+ lt_save_CFLAGS="$CFLAGS"
+ LIBS="conftstm.$ac_objext"
+ CFLAGS="$CFLAGS$lt_prog_compiler_no_builtin_flag"
+ if { { eval echo "\"\$as_me\":${as_lineno-$LINENO}: \"$ac_link\""; } >&5
+ (eval $ac_link) 2>&5
+ ac_status=$?
+ $as_echo "$as_me:${as_lineno-$LINENO}: \$? = $ac_status" >&5
+ test $ac_status = 0; } && test -s conftest${ac_exeext}; then
+ pipe_works=yes
+ fi
+ LIBS="$lt_save_LIBS"
+ CFLAGS="$lt_save_CFLAGS"
+ else
+ echo "cannot find nm_test_func in $nlist" >&5
+ fi
+ else
+ echo "cannot find nm_test_var in $nlist" >&5
+ fi
+ else
+ echo "cannot run $lt_cv_sys_global_symbol_pipe" >&5
+ fi
+ else
+ echo "$progname: failed program was:" >&5
+ cat conftest.$ac_ext >&5
+ fi
+ rm -rf conftest* conftst*
+
+ # Do not use the global_symbol_pipe unless it works.
+ if test "$pipe_works" = yes; then
+ break
+ else
+ lt_cv_sys_global_symbol_pipe=
+ fi
+done
+
+fi
+
+if test -z "$lt_cv_sys_global_symbol_pipe"; then
+ lt_cv_sys_global_symbol_to_cdecl=
+fi
+if test -z "$lt_cv_sys_global_symbol_pipe$lt_cv_sys_global_symbol_to_cdecl"; then
+ { $as_echo "$as_me:${as_lineno-$LINENO}: result: failed" >&5
+$as_echo "failed" >&6; }
+else
+ { $as_echo "$as_me:${as_lineno-$LINENO}: result: ok" >&5
+$as_echo "ok" >&6; }
+fi
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+# Check whether --enable-libtool-lock was given.
+if test "${enable_libtool_lock+set}" = set; then :
+ enableval=$enable_libtool_lock;
+fi
+
+test "x$enable_libtool_lock" != xno && enable_libtool_lock=yes
+
+# Some flags need to be propagated to the compiler or linker for good
+# libtool support.
+case $host in
+ia64-*-hpux*)
+ # Find out which ABI we are using.
+ echo 'int i;' > conftest.$ac_ext
+ if { { eval echo "\"\$as_me\":${as_lineno-$LINENO}: \"$ac_compile\""; } >&5
+ (eval $ac_compile) 2>&5
+ ac_status=$?
+ $as_echo "$as_me:${as_lineno-$LINENO}: \$? = $ac_status" >&5
+ test $ac_status = 0; }; then
+ case `/usr/bin/file conftest.$ac_objext` in
+ *ELF-32*)
+ HPUX_IA64_MODE="32"
+ ;;
+ *ELF-64*)
+ HPUX_IA64_MODE="64"
+ ;;
+ esac
+ fi
+ rm -rf conftest*
+ ;;
+*-*-irix6*)
+ # Find out which ABI we are using.
+ echo '#line 8499 "configure"' > conftest.$ac_ext
+ if { { eval echo "\"\$as_me\":${as_lineno-$LINENO}: \"$ac_compile\""; } >&5
+ (eval $ac_compile) 2>&5
+ ac_status=$?
+ $as_echo "$as_me:${as_lineno-$LINENO}: \$? = $ac_status" >&5
+ test $ac_status = 0; }; then
+ if test "$lt_cv_prog_gnu_ld" = yes; then
+ case `/usr/bin/file conftest.$ac_objext` in
+ *32-bit*)
+ LD="${LD-ld} -melf32bsmip"
+ ;;
+ *N32*)
+ LD="${LD-ld} -melf32bmipn32"
+ ;;
+ *64-bit*)
+ LD="${LD-ld} -melf64bmip"
+ ;;
+ esac
+ else
+ case `/usr/bin/file conftest.$ac_objext` in
+ *32-bit*)
+ LD="${LD-ld} -32"
+ ;;
+ *N32*)
+ LD="${LD-ld} -n32"
+ ;;
+ *64-bit*)
+ LD="${LD-ld} -64"
+ ;;
+ esac
+ fi
+ fi
+ rm -rf conftest*
+ ;;
+
+x86_64-*kfreebsd*-gnu|x86_64-*linux*|ppc*-*linux*|powerpc*-*linux*| \
+s390*-*linux*|s390*-*tpf*|sparc*-*linux*)
+ # Find out which ABI we are using.
+ echo 'int i;' > conftest.$ac_ext
+ if { { eval echo "\"\$as_me\":${as_lineno-$LINENO}: \"$ac_compile\""; } >&5
+ (eval $ac_compile) 2>&5
+ ac_status=$?
+ $as_echo "$as_me:${as_lineno-$LINENO}: \$? = $ac_status" >&5
+ test $ac_status = 0; }; then
+ case `/usr/bin/file conftest.o` in
+ *32-bit*)
+ case $host in
+ x86_64-*kfreebsd*-gnu)
+ LD="${LD-ld} -m elf_i386_fbsd"
+ ;;
+ x86_64-*linux*)
+ LD="${LD-ld} -m elf_i386"
+ ;;
+ ppc64-*linux*|powerpc64-*linux*)
+ LD="${LD-ld} -m elf32ppclinux"
+ ;;
+ s390x-*linux*)
+ LD="${LD-ld} -m elf_s390"
+ ;;
+ sparc64-*linux*)
+ LD="${LD-ld} -m elf32_sparc"
+ ;;
+ esac
+ ;;
+ *64-bit*)
+ case $host in
+ x86_64-*kfreebsd*-gnu)
+ LD="${LD-ld} -m elf_x86_64_fbsd"
+ ;;
+ x86_64-*linux*)
+ LD="${LD-ld} -m elf_x86_64"
+ ;;
+ ppc*-*linux*|powerpc*-*linux*)
+ LD="${LD-ld} -m elf64ppc"
+ ;;
+ s390*-*linux*|s390*-*tpf*)
+ LD="${LD-ld} -m elf64_s390"
+ ;;
+ sparc*-*linux*)
+ LD="${LD-ld} -m elf64_sparc"
+ ;;
+ esac
+ ;;
+ esac
+ fi
+ rm -rf conftest*
+ ;;
+
+*-*-sco3.2v5*)
+ # On SCO OpenServer 5, we need -belf to get full-featured binaries.
+ SAVE_CFLAGS="$CFLAGS"
+ CFLAGS="$CFLAGS -belf"
+ { $as_echo "$as_me:${as_lineno-$LINENO}: checking whether the C compiler needs -belf" >&5
+$as_echo_n "checking whether the C compiler needs -belf... " >&6; }
+if test "${lt_cv_cc_needs_belf+set}" = set; then :
+ $as_echo_n "(cached) " >&6
+else
+ ac_ext=c
+ac_cpp='$CPP $CPPFLAGS'
+ac_compile='$CC -c $CFLAGS $CPPFLAGS conftest.$ac_ext >&5'
+ac_link='$CC -o conftest$ac_exeext $CFLAGS $CPPFLAGS $LDFLAGS conftest.$ac_ext $LIBS >&5'
+ac_compiler_gnu=$ac_cv_c_compiler_gnu
+
+ cat confdefs.h - <<_ACEOF >conftest.$ac_ext
+/* end confdefs.h. */
+
+int
+main ()
+{
+
+ ;
+ return 0;
+}
+_ACEOF
+if ac_fn_c_try_link "$LINENO"; then :
+ lt_cv_cc_needs_belf=yes
+else
+ lt_cv_cc_needs_belf=no
+fi
+rm -f core conftest.err conftest.$ac_objext \
+ conftest$ac_exeext conftest.$ac_ext
+ ac_ext=c
+ac_cpp='$CPP $CPPFLAGS'
+ac_compile='$CC -c $CFLAGS $CPPFLAGS conftest.$ac_ext >&5'
+ac_link='$CC -o conftest$ac_exeext $CFLAGS $CPPFLAGS $LDFLAGS conftest.$ac_ext $LIBS >&5'
+ac_compiler_gnu=$ac_cv_c_compiler_gnu
+
+fi
+{ $as_echo "$as_me:${as_lineno-$LINENO}: result: $lt_cv_cc_needs_belf" >&5
+$as_echo "$lt_cv_cc_needs_belf" >&6; }
+ if test x"$lt_cv_cc_needs_belf" != x"yes"; then
+ # this is probably gcc 2.8.0, egcs 1.0 or newer; no need for -belf
+ CFLAGS="$SAVE_CFLAGS"
+ fi
+ ;;
+sparc*-*solaris*)
+ # Find out which ABI we are using.
+ echo 'int i;' > conftest.$ac_ext
+ if { { eval echo "\"\$as_me\":${as_lineno-$LINENO}: \"$ac_compile\""; } >&5
+ (eval $ac_compile) 2>&5
+ ac_status=$?
+ $as_echo "$as_me:${as_lineno-$LINENO}: \$? = $ac_status" >&5
+ test $ac_status = 0; }; then
+ case `/usr/bin/file conftest.o` in
+ *64-bit*)
+ case $lt_cv_prog_gnu_ld in
+ yes*) LD="${LD-ld} -m elf64_sparc" ;;
+ *)
+ if ${LD-ld} -64 -r -o conftest2.o conftest.o >/dev/null 2>&1; then
+ LD="${LD-ld} -64"
+ fi
+ ;;
+ esac
+ ;;
+ esac
+ fi
+ rm -rf conftest*
+ ;;
+esac
+
+need_locks="$enable_libtool_lock"
+
+
+ case $host_os in
+ rhapsody* | darwin*)
+ if test -n "$ac_tool_prefix"; then
+ # Extract the first word of "${ac_tool_prefix}dsymutil", so it can be a program name with args.
+set dummy ${ac_tool_prefix}dsymutil; ac_word=$2
+{ $as_echo "$as_me:${as_lineno-$LINENO}: checking for $ac_word" >&5
+$as_echo_n "checking for $ac_word... " >&6; }
+if test "${ac_cv_prog_DSYMUTIL+set}" = set; then :
+ $as_echo_n "(cached) " >&6
+else
+ if test -n "$DSYMUTIL"; then
+ ac_cv_prog_DSYMUTIL="$DSYMUTIL" # Let the user override the test.
+else
+as_save_IFS=$IFS; IFS=$PATH_SEPARATOR
+for as_dir in $PATH
+do
+ IFS=$as_save_IFS
+ test -z "$as_dir" && as_dir=.
+ for ac_exec_ext in '' $ac_executable_extensions; do
+ if { test -f "$as_dir/$ac_word$ac_exec_ext" && $as_test_x "$as_dir/$ac_word$ac_exec_ext"; }; then
+ ac_cv_prog_DSYMUTIL="${ac_tool_prefix}dsymutil"
+ $as_echo "$as_me:${as_lineno-$LINENO}: found $as_dir/$ac_word$ac_exec_ext" >&5
+ break 2
+ fi
+done
+ done
+IFS=$as_save_IFS
+
+fi
+fi
+DSYMUTIL=$ac_cv_prog_DSYMUTIL
+if test -n "$DSYMUTIL"; then
+ { $as_echo "$as_me:${as_lineno-$LINENO}: result: $DSYMUTIL" >&5
+$as_echo "$DSYMUTIL" >&6; }
+else
+ { $as_echo "$as_me:${as_lineno-$LINENO}: result: no" >&5
+$as_echo "no" >&6; }
+fi
+
+
+fi
+if test -z "$ac_cv_prog_DSYMUTIL"; then
+ ac_ct_DSYMUTIL=$DSYMUTIL
+ # Extract the first word of "dsymutil", so it can be a program name with args.
+set dummy dsymutil; ac_word=$2
+{ $as_echo "$as_me:${as_lineno-$LINENO}: checking for $ac_word" >&5
+$as_echo_n "checking for $ac_word... " >&6; }
+if test "${ac_cv_prog_ac_ct_DSYMUTIL+set}" = set; then :
+ $as_echo_n "(cached) " >&6
+else
+ if test -n "$ac_ct_DSYMUTIL"; then
+ ac_cv_prog_ac_ct_DSYMUTIL="$ac_ct_DSYMUTIL" # Let the user override the test.
+else
+as_save_IFS=$IFS; IFS=$PATH_SEPARATOR
+for as_dir in $PATH
+do
+ IFS=$as_save_IFS
+ test -z "$as_dir" && as_dir=.
+ for ac_exec_ext in '' $ac_executable_extensions; do
+ if { test -f "$as_dir/$ac_word$ac_exec_ext" && $as_test_x "$as_dir/$ac_word$ac_exec_ext"; }; then
+ ac_cv_prog_ac_ct_DSYMUTIL="dsymutil"
+ $as_echo "$as_me:${as_lineno-$LINENO}: found $as_dir/$ac_word$ac_exec_ext" >&5
+ break 2
+ fi
+done
+ done
+IFS=$as_save_IFS
+
+fi
+fi
+ac_ct_DSYMUTIL=$ac_cv_prog_ac_ct_DSYMUTIL
+if test -n "$ac_ct_DSYMUTIL"; then
+ { $as_echo "$as_me:${as_lineno-$LINENO}: result: $ac_ct_DSYMUTIL" >&5
+$as_echo "$ac_ct_DSYMUTIL" >&6; }
+else
+ { $as_echo "$as_me:${as_lineno-$LINENO}: result: no" >&5
+$as_echo "no" >&6; }
+fi
+
+ if test "x$ac_ct_DSYMUTIL" = x; then
+ DSYMUTIL=":"
+ else
+ case $cross_compiling:$ac_tool_warned in
+yes:)
+{ $as_echo "$as_me:${as_lineno-$LINENO}: WARNING: using cross tools not prefixed with host triplet" >&5
+$as_echo "$as_me: WARNING: using cross tools not prefixed with host triplet" >&2;}
+ac_tool_warned=yes ;;
+esac
+ DSYMUTIL=$ac_ct_DSYMUTIL
+ fi
+else
+ DSYMUTIL="$ac_cv_prog_DSYMUTIL"
+fi
+
+ if test -n "$ac_tool_prefix"; then
+ # Extract the first word of "${ac_tool_prefix}nmedit", so it can be a program name with args.
+set dummy ${ac_tool_prefix}nmedit; ac_word=$2
+{ $as_echo "$as_me:${as_lineno-$LINENO}: checking for $ac_word" >&5
+$as_echo_n "checking for $ac_word... " >&6; }
+if test "${ac_cv_prog_NMEDIT+set}" = set; then :
+ $as_echo_n "(cached) " >&6
+else
+ if test -n "$NMEDIT"; then
+ ac_cv_prog_NMEDIT="$NMEDIT" # Let the user override the test.
+else
+as_save_IFS=$IFS; IFS=$PATH_SEPARATOR
+for as_dir in $PATH
+do
+ IFS=$as_save_IFS
+ test -z "$as_dir" && as_dir=.
+ for ac_exec_ext in '' $ac_executable_extensions; do
+ if { test -f "$as_dir/$ac_word$ac_exec_ext" && $as_test_x "$as_dir/$ac_word$ac_exec_ext"; }; then
+ ac_cv_prog_NMEDIT="${ac_tool_prefix}nmedit"
+ $as_echo "$as_me:${as_lineno-$LINENO}: found $as_dir/$ac_word$ac_exec_ext" >&5
+ break 2
+ fi
+done
+ done
+IFS=$as_save_IFS
+
+fi
+fi
+NMEDIT=$ac_cv_prog_NMEDIT
+if test -n "$NMEDIT"; then
+ { $as_echo "$as_me:${as_lineno-$LINENO}: result: $NMEDIT" >&5
+$as_echo "$NMEDIT" >&6; }
+else
+ { $as_echo "$as_me:${as_lineno-$LINENO}: result: no" >&5
+$as_echo "no" >&6; }
+fi
+
+
+fi
+if test -z "$ac_cv_prog_NMEDIT"; then
+ ac_ct_NMEDIT=$NMEDIT
+ # Extract the first word of "nmedit", so it can be a program name with args.
+set dummy nmedit; ac_word=$2
+{ $as_echo "$as_me:${as_lineno-$LINENO}: checking for $ac_word" >&5
+$as_echo_n "checking for $ac_word... " >&6; }
+if test "${ac_cv_prog_ac_ct_NMEDIT+set}" = set; then :
+ $as_echo_n "(cached) " >&6
+else
+ if test -n "$ac_ct_NMEDIT"; then
+ ac_cv_prog_ac_ct_NMEDIT="$ac_ct_NMEDIT" # Let the user override the test.
+else
+as_save_IFS=$IFS; IFS=$PATH_SEPARATOR
+for as_dir in $PATH
+do
+ IFS=$as_save_IFS
+ test -z "$as_dir" && as_dir=.
+ for ac_exec_ext in '' $ac_executable_extensions; do
+ if { test -f "$as_dir/$ac_word$ac_exec_ext" && $as_test_x "$as_dir/$ac_word$ac_exec_ext"; }; then
+ ac_cv_prog_ac_ct_NMEDIT="nmedit"
+ $as_echo "$as_me:${as_lineno-$LINENO}: found $as_dir/$ac_word$ac_exec_ext" >&5
+ break 2
+ fi
+done
+ done
+IFS=$as_save_IFS
+
+fi
+fi
+ac_ct_NMEDIT=$ac_cv_prog_ac_ct_NMEDIT
+if test -n "$ac_ct_NMEDIT"; then
+ { $as_echo "$as_me:${as_lineno-$LINENO}: result: $ac_ct_NMEDIT" >&5
+$as_echo "$ac_ct_NMEDIT" >&6; }
+else
+ { $as_echo "$as_me:${as_lineno-$LINENO}: result: no" >&5
+$as_echo "no" >&6; }
+fi
+
+ if test "x$ac_ct_NMEDIT" = x; then
+ NMEDIT=":"
+ else
+ case $cross_compiling:$ac_tool_warned in
+yes:)
+{ $as_echo "$as_me:${as_lineno-$LINENO}: WARNING: using cross tools not prefixed with host triplet" >&5
+$as_echo "$as_me: WARNING: using cross tools not prefixed with host triplet" >&2;}
+ac_tool_warned=yes ;;
+esac
+ NMEDIT=$ac_ct_NMEDIT
+ fi
+else
+ NMEDIT="$ac_cv_prog_NMEDIT"
+fi
+
+ if test -n "$ac_tool_prefix"; then
+ # Extract the first word of "${ac_tool_prefix}lipo", so it can be a program name with args.
+set dummy ${ac_tool_prefix}lipo; ac_word=$2
+{ $as_echo "$as_me:${as_lineno-$LINENO}: checking for $ac_word" >&5
+$as_echo_n "checking for $ac_word... " >&6; }
+if test "${ac_cv_prog_LIPO+set}" = set; then :
+ $as_echo_n "(cached) " >&6
+else
+ if test -n "$LIPO"; then
+ ac_cv_prog_LIPO="$LIPO" # Let the user override the test.
+else
+as_save_IFS=$IFS; IFS=$PATH_SEPARATOR
+for as_dir in $PATH
+do
+ IFS=$as_save_IFS
+ test -z "$as_dir" && as_dir=.
+ for ac_exec_ext in '' $ac_executable_extensions; do
+ if { test -f "$as_dir/$ac_word$ac_exec_ext" && $as_test_x "$as_dir/$ac_word$ac_exec_ext"; }; then
+ ac_cv_prog_LIPO="${ac_tool_prefix}lipo"
+ $as_echo "$as_me:${as_lineno-$LINENO}: found $as_dir/$ac_word$ac_exec_ext" >&5
+ break 2
+ fi
+done
+ done
+IFS=$as_save_IFS
+
+fi
+fi
+LIPO=$ac_cv_prog_LIPO
+if test -n "$LIPO"; then
+ { $as_echo "$as_me:${as_lineno-$LINENO}: result: $LIPO" >&5
+$as_echo "$LIPO" >&6; }
+else
+ { $as_echo "$as_me:${as_lineno-$LINENO}: result: no" >&5
+$as_echo "no" >&6; }
+fi
+
+
+fi
+if test -z "$ac_cv_prog_LIPO"; then
+ ac_ct_LIPO=$LIPO
+ # Extract the first word of "lipo", so it can be a program name with args.
+set dummy lipo; ac_word=$2
+{ $as_echo "$as_me:${as_lineno-$LINENO}: checking for $ac_word" >&5
+$as_echo_n "checking for $ac_word... " >&6; }
+if test "${ac_cv_prog_ac_ct_LIPO+set}" = set; then :
+ $as_echo_n "(cached) " >&6
+else
+ if test -n "$ac_ct_LIPO"; then
+ ac_cv_prog_ac_ct_LIPO="$ac_ct_LIPO" # Let the user override the test.
+else
+as_save_IFS=$IFS; IFS=$PATH_SEPARATOR
+for as_dir in $PATH
+do
+ IFS=$as_save_IFS
+ test -z "$as_dir" && as_dir=.
+ for ac_exec_ext in '' $ac_executable_extensions; do
+ if { test -f "$as_dir/$ac_word$ac_exec_ext" && $as_test_x "$as_dir/$ac_word$ac_exec_ext"; }; then
+ ac_cv_prog_ac_ct_LIPO="lipo"
+ $as_echo "$as_me:${as_lineno-$LINENO}: found $as_dir/$ac_word$ac_exec_ext" >&5
+ break 2
+ fi
+done
+ done
+IFS=$as_save_IFS
+
+fi
+fi
+ac_ct_LIPO=$ac_cv_prog_ac_ct_LIPO
+if test -n "$ac_ct_LIPO"; then
+ { $as_echo "$as_me:${as_lineno-$LINENO}: result: $ac_ct_LIPO" >&5
+$as_echo "$ac_ct_LIPO" >&6; }
+else
+ { $as_echo "$as_me:${as_lineno-$LINENO}: result: no" >&5
+$as_echo "no" >&6; }
+fi
+
+ if test "x$ac_ct_LIPO" = x; then
+ LIPO=":"
+ else
+ case $cross_compiling:$ac_tool_warned in
+yes:)
+{ $as_echo "$as_me:${as_lineno-$LINENO}: WARNING: using cross tools not prefixed with host triplet" >&5
+$as_echo "$as_me: WARNING: using cross tools not prefixed with host triplet" >&2;}
+ac_tool_warned=yes ;;
+esac
+ LIPO=$ac_ct_LIPO
+ fi
+else
+ LIPO="$ac_cv_prog_LIPO"
+fi
+
+ if test -n "$ac_tool_prefix"; then
+ # Extract the first word of "${ac_tool_prefix}otool", so it can be a program name with args.
+set dummy ${ac_tool_prefix}otool; ac_word=$2
+{ $as_echo "$as_me:${as_lineno-$LINENO}: checking for $ac_word" >&5
+$as_echo_n "checking for $ac_word... " >&6; }
+if test "${ac_cv_prog_OTOOL+set}" = set; then :
+ $as_echo_n "(cached) " >&6
+else
+ if test -n "$OTOOL"; then
+ ac_cv_prog_OTOOL="$OTOOL" # Let the user override the test.
+else
+as_save_IFS=$IFS; IFS=$PATH_SEPARATOR
+for as_dir in $PATH
+do
+ IFS=$as_save_IFS
+ test -z "$as_dir" && as_dir=.
+ for ac_exec_ext in '' $ac_executable_extensions; do
+ if { test -f "$as_dir/$ac_word$ac_exec_ext" && $as_test_x "$as_dir/$ac_word$ac_exec_ext"; }; then
+ ac_cv_prog_OTOOL="${ac_tool_prefix}otool"
+ $as_echo "$as_me:${as_lineno-$LINENO}: found $as_dir/$ac_word$ac_exec_ext" >&5
+ break 2
+ fi
+done
+ done
+IFS=$as_save_IFS
+
+fi
+fi
+OTOOL=$ac_cv_prog_OTOOL
+if test -n "$OTOOL"; then
+ { $as_echo "$as_me:${as_lineno-$LINENO}: result: $OTOOL" >&5
+$as_echo "$OTOOL" >&6; }
+else
+ { $as_echo "$as_me:${as_lineno-$LINENO}: result: no" >&5
+$as_echo "no" >&6; }
+fi
+
+
+fi
+if test -z "$ac_cv_prog_OTOOL"; then
+ ac_ct_OTOOL=$OTOOL
+ # Extract the first word of "otool", so it can be a program name with args.
+set dummy otool; ac_word=$2
+{ $as_echo "$as_me:${as_lineno-$LINENO}: checking for $ac_word" >&5
+$as_echo_n "checking for $ac_word... " >&6; }
+if test "${ac_cv_prog_ac_ct_OTOOL+set}" = set; then :
+ $as_echo_n "(cached) " >&6
+else
+ if test -n "$ac_ct_OTOOL"; then
+ ac_cv_prog_ac_ct_OTOOL="$ac_ct_OTOOL" # Let the user override the test.
+else
+as_save_IFS=$IFS; IFS=$PATH_SEPARATOR
+for as_dir in $PATH
+do
+ IFS=$as_save_IFS
+ test -z "$as_dir" && as_dir=.
+ for ac_exec_ext in '' $ac_executable_extensions; do
+ if { test -f "$as_dir/$ac_word$ac_exec_ext" && $as_test_x "$as_dir/$ac_word$ac_exec_ext"; }; then
+ ac_cv_prog_ac_ct_OTOOL="otool"
+ $as_echo "$as_me:${as_lineno-$LINENO}: found $as_dir/$ac_word$ac_exec_ext" >&5
+ break 2
+ fi
+done
+ done
+IFS=$as_save_IFS
+
+fi
+fi
+ac_ct_OTOOL=$ac_cv_prog_ac_ct_OTOOL
+if test -n "$ac_ct_OTOOL"; then
+ { $as_echo "$as_me:${as_lineno-$LINENO}: result: $ac_ct_OTOOL" >&5
+$as_echo "$ac_ct_OTOOL" >&6; }
+else
+ { $as_echo "$as_me:${as_lineno-$LINENO}: result: no" >&5
+$as_echo "no" >&6; }
+fi
+
+ if test "x$ac_ct_OTOOL" = x; then
+ OTOOL=":"
+ else
+ case $cross_compiling:$ac_tool_warned in
+yes:)
+{ $as_echo "$as_me:${as_lineno-$LINENO}: WARNING: using cross tools not prefixed with host triplet" >&5
+$as_echo "$as_me: WARNING: using cross tools not prefixed with host triplet" >&2;}
+ac_tool_warned=yes ;;
+esac
+ OTOOL=$ac_ct_OTOOL
+ fi
+else
+ OTOOL="$ac_cv_prog_OTOOL"
+fi
+
+ if test -n "$ac_tool_prefix"; then
+ # Extract the first word of "${ac_tool_prefix}otool64", so it can be a program name with args.
+set dummy ${ac_tool_prefix}otool64; ac_word=$2
+{ $as_echo "$as_me:${as_lineno-$LINENO}: checking for $ac_word" >&5
+$as_echo_n "checking for $ac_word... " >&6; }
+if test "${ac_cv_prog_OTOOL64+set}" = set; then :
+ $as_echo_n "(cached) " >&6
+else
+ if test -n "$OTOOL64"; then
+ ac_cv_prog_OTOOL64="$OTOOL64" # Let the user override the test.
+else
+as_save_IFS=$IFS; IFS=$PATH_SEPARATOR
+for as_dir in $PATH
+do
+ IFS=$as_save_IFS
+ test -z "$as_dir" && as_dir=.
+ for ac_exec_ext in '' $ac_executable_extensions; do
+ if { test -f "$as_dir/$ac_word$ac_exec_ext" && $as_test_x "$as_dir/$ac_word$ac_exec_ext"; }; then
+ ac_cv_prog_OTOOL64="${ac_tool_prefix}otool64"
+ $as_echo "$as_me:${as_lineno-$LINENO}: found $as_dir/$ac_word$ac_exec_ext" >&5
+ break 2
+ fi
+done
+ done
+IFS=$as_save_IFS
+
+fi
+fi
+OTOOL64=$ac_cv_prog_OTOOL64
+if test -n "$OTOOL64"; then
+ { $as_echo "$as_me:${as_lineno-$LINENO}: result: $OTOOL64" >&5
+$as_echo "$OTOOL64" >&6; }
+else
+ { $as_echo "$as_me:${as_lineno-$LINENO}: result: no" >&5
+$as_echo "no" >&6; }
+fi
+
+
+fi
+if test -z "$ac_cv_prog_OTOOL64"; then
+ ac_ct_OTOOL64=$OTOOL64
+ # Extract the first word of "otool64", so it can be a program name with args.
+set dummy otool64; ac_word=$2
+{ $as_echo "$as_me:${as_lineno-$LINENO}: checking for $ac_word" >&5
+$as_echo_n "checking for $ac_word... " >&6; }
+if test "${ac_cv_prog_ac_ct_OTOOL64+set}" = set; then :
+ $as_echo_n "(cached) " >&6
+else
+ if test -n "$ac_ct_OTOOL64"; then
+ ac_cv_prog_ac_ct_OTOOL64="$ac_ct_OTOOL64" # Let the user override the test.
+else
+as_save_IFS=$IFS; IFS=$PATH_SEPARATOR
+for as_dir in $PATH
+do
+ IFS=$as_save_IFS
+ test -z "$as_dir" && as_dir=.
+ for ac_exec_ext in '' $ac_executable_extensions; do
+ if { test -f "$as_dir/$ac_word$ac_exec_ext" && $as_test_x "$as_dir/$ac_word$ac_exec_ext"; }; then
+ ac_cv_prog_ac_ct_OTOOL64="otool64"
+ $as_echo "$as_me:${as_lineno-$LINENO}: found $as_dir/$ac_word$ac_exec_ext" >&5
+ break 2
+ fi
+done
+ done
+IFS=$as_save_IFS
+
+fi
+fi
+ac_ct_OTOOL64=$ac_cv_prog_ac_ct_OTOOL64
+if test -n "$ac_ct_OTOOL64"; then
+ { $as_echo "$as_me:${as_lineno-$LINENO}: result: $ac_ct_OTOOL64" >&5
+$as_echo "$ac_ct_OTOOL64" >&6; }
+else
+ { $as_echo "$as_me:${as_lineno-$LINENO}: result: no" >&5
+$as_echo "no" >&6; }
+fi
+
+ if test "x$ac_ct_OTOOL64" = x; then
+ OTOOL64=":"
+ else
+ case $cross_compiling:$ac_tool_warned in
+yes:)
+{ $as_echo "$as_me:${as_lineno-$LINENO}: WARNING: using cross tools not prefixed with host triplet" >&5
+$as_echo "$as_me: WARNING: using cross tools not prefixed with host triplet" >&2;}
+ac_tool_warned=yes ;;
+esac
+ OTOOL64=$ac_ct_OTOOL64
+ fi
+else
+ OTOOL64="$ac_cv_prog_OTOOL64"
+fi
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+ { $as_echo "$as_me:${as_lineno-$LINENO}: checking for -single_module linker flag" >&5
+$as_echo_n "checking for -single_module linker flag... " >&6; }
+if test "${lt_cv_apple_cc_single_mod+set}" = set; then :
+ $as_echo_n "(cached) " >&6
+else
+ lt_cv_apple_cc_single_mod=no
+ if test -z "${LT_MULTI_MODULE}"; then
+ # By default we will add the -single_module flag. You can override
+ # by either setting the environment variable LT_MULTI_MODULE
+ # non-empty at configure time, or by adding -multi_module to the
+ # link flags.
+ rm -rf libconftest.dylib*
+ echo "int foo(void){return 1;}" > conftest.c
+ echo "$LTCC $LTCFLAGS $LDFLAGS -o libconftest.dylib \
+-dynamiclib -Wl,-single_module conftest.c" >&5
+ $LTCC $LTCFLAGS $LDFLAGS -o libconftest.dylib \
+ -dynamiclib -Wl,-single_module conftest.c 2>conftest.err
+ _lt_result=$?
+ if test -f libconftest.dylib && test ! -s conftest.err && test $_lt_result = 0; then
+ lt_cv_apple_cc_single_mod=yes
+ else
+ cat conftest.err >&5
+ fi
+ rm -rf libconftest.dylib*
+ rm -f conftest.*
+ fi
+fi
+{ $as_echo "$as_me:${as_lineno-$LINENO}: result: $lt_cv_apple_cc_single_mod" >&5
+$as_echo "$lt_cv_apple_cc_single_mod" >&6; }
+ { $as_echo "$as_me:${as_lineno-$LINENO}: checking for -exported_symbols_list linker flag" >&5
+$as_echo_n "checking for -exported_symbols_list linker flag... " >&6; }
+if test "${lt_cv_ld_exported_symbols_list+set}" = set; then :
+ $as_echo_n "(cached) " >&6
+else
+ lt_cv_ld_exported_symbols_list=no
+ save_LDFLAGS=$LDFLAGS
+ echo "_main" > conftest.sym
+ LDFLAGS="$LDFLAGS -Wl,-exported_symbols_list,conftest.sym"
+ cat confdefs.h - <<_ACEOF >conftest.$ac_ext
+/* end confdefs.h. */
+
+int
+main ()
+{
+
+ ;
+ return 0;
+}
+_ACEOF
+if ac_fn_c_try_link "$LINENO"; then :
+ lt_cv_ld_exported_symbols_list=yes
+else
+ lt_cv_ld_exported_symbols_list=no
+fi
+rm -f core conftest.err conftest.$ac_objext \
+ conftest$ac_exeext conftest.$ac_ext
+ LDFLAGS="$save_LDFLAGS"
+
+fi
+{ $as_echo "$as_me:${as_lineno-$LINENO}: result: $lt_cv_ld_exported_symbols_list" >&5
+$as_echo "$lt_cv_ld_exported_symbols_list" >&6; }
+ case $host_os in
+ rhapsody* | darwin1.[012])
+ _lt_dar_allow_undefined='${wl}-undefined ${wl}suppress' ;;
+ darwin1.*)
+ _lt_dar_allow_undefined='${wl}-flat_namespace ${wl}-undefined ${wl}suppress' ;;
+ darwin*) # darwin 5.x on
+ # if running on 10.5 or later, the deployment target defaults
+ # to the OS version, if on x86, and 10.4, the deployment
+ # target defaults to 10.4. Don't you love it?
+ case ${MACOSX_DEPLOYMENT_TARGET-10.0},$host in
+ 10.0,*86*-darwin8*|10.0,*-darwin[91]*)
+ _lt_dar_allow_undefined='${wl}-undefined ${wl}dynamic_lookup' ;;
+ 10.[012]*)
+ _lt_dar_allow_undefined='${wl}-flat_namespace ${wl}-undefined ${wl}suppress' ;;
+ 10.*)
+ _lt_dar_allow_undefined='${wl}-undefined ${wl}dynamic_lookup' ;;
+ esac
+ ;;
+ esac
+ if test "$lt_cv_apple_cc_single_mod" = "yes"; then
+ _lt_dar_single_mod='$single_module'
+ fi
+ if test "$lt_cv_ld_exported_symbols_list" = "yes"; then
+ _lt_dar_export_syms=' ${wl}-exported_symbols_list,$output_objdir/${libname}-symbols.expsym'
+ else
+ _lt_dar_export_syms='~$NMEDIT -s $output_objdir/${libname}-symbols.expsym ${lib}'
+ fi
+ if test "$DSYMUTIL" != ":"; then
+ _lt_dsymutil='~$DSYMUTIL $lib || :'
+ else
+ _lt_dsymutil=
+ fi
+ ;;
+ esac
+
+for ac_header in dlfcn.h
+do :
+ ac_fn_c_check_header_compile "$LINENO" "dlfcn.h" "ac_cv_header_dlfcn_h" "$ac_includes_default
+"
+if test "x$ac_cv_header_dlfcn_h" = x""yes; then :
+ cat >>confdefs.h <<_ACEOF
+#define HAVE_DLFCN_H 1
+_ACEOF
+
+fi
+
+done
+
+
+
+# Set options
+enable_win32_dll=yes
+
+case $host in
+*-*-cygwin* | *-*-mingw* | *-*-pw32* | *-cegcc*)
+ if test -n "$ac_tool_prefix"; then
+ # Extract the first word of "${ac_tool_prefix}as", so it can be a program name with args.
+set dummy ${ac_tool_prefix}as; ac_word=$2
+{ $as_echo "$as_me:${as_lineno-$LINENO}: checking for $ac_word" >&5
+$as_echo_n "checking for $ac_word... " >&6; }
+if test "${ac_cv_prog_AS+set}" = set; then :
+ $as_echo_n "(cached) " >&6
+else
+ if test -n "$AS"; then
+ ac_cv_prog_AS="$AS" # Let the user override the test.
+else
+as_save_IFS=$IFS; IFS=$PATH_SEPARATOR
+for as_dir in $PATH
+do
+ IFS=$as_save_IFS
+ test -z "$as_dir" && as_dir=.
+ for ac_exec_ext in '' $ac_executable_extensions; do
+ if { test -f "$as_dir/$ac_word$ac_exec_ext" && $as_test_x "$as_dir/$ac_word$ac_exec_ext"; }; then
+ ac_cv_prog_AS="${ac_tool_prefix}as"
+ $as_echo "$as_me:${as_lineno-$LINENO}: found $as_dir/$ac_word$ac_exec_ext" >&5
+ break 2
+ fi
+done
+ done
+IFS=$as_save_IFS
+
+fi
+fi
+AS=$ac_cv_prog_AS
+if test -n "$AS"; then
+ { $as_echo "$as_me:${as_lineno-$LINENO}: result: $AS" >&5
+$as_echo "$AS" >&6; }
+else
+ { $as_echo "$as_me:${as_lineno-$LINENO}: result: no" >&5
+$as_echo "no" >&6; }
+fi
+
+
+fi
+if test -z "$ac_cv_prog_AS"; then
+ ac_ct_AS=$AS
+ # Extract the first word of "as", so it can be a program name with args.
+set dummy as; ac_word=$2
+{ $as_echo "$as_me:${as_lineno-$LINENO}: checking for $ac_word" >&5
+$as_echo_n "checking for $ac_word... " >&6; }
+if test "${ac_cv_prog_ac_ct_AS+set}" = set; then :
+ $as_echo_n "(cached) " >&6
+else
+ if test -n "$ac_ct_AS"; then
+ ac_cv_prog_ac_ct_AS="$ac_ct_AS" # Let the user override the test.
+else
+as_save_IFS=$IFS; IFS=$PATH_SEPARATOR
+for as_dir in $PATH
+do
+ IFS=$as_save_IFS
+ test -z "$as_dir" && as_dir=.
+ for ac_exec_ext in '' $ac_executable_extensions; do
+ if { test -f "$as_dir/$ac_word$ac_exec_ext" && $as_test_x "$as_dir/$ac_word$ac_exec_ext"; }; then
+ ac_cv_prog_ac_ct_AS="as"
+ $as_echo "$as_me:${as_lineno-$LINENO}: found $as_dir/$ac_word$ac_exec_ext" >&5
+ break 2
+ fi
+done
+ done
+IFS=$as_save_IFS
+
+fi
+fi
+ac_ct_AS=$ac_cv_prog_ac_ct_AS
+if test -n "$ac_ct_AS"; then
+ { $as_echo "$as_me:${as_lineno-$LINENO}: result: $ac_ct_AS" >&5
+$as_echo "$ac_ct_AS" >&6; }
+else
+ { $as_echo "$as_me:${as_lineno-$LINENO}: result: no" >&5
+$as_echo "no" >&6; }
+fi
+
+ if test "x$ac_ct_AS" = x; then
+ AS="false"
+ else
+ case $cross_compiling:$ac_tool_warned in
+yes:)
+{ $as_echo "$as_me:${as_lineno-$LINENO}: WARNING: using cross tools not prefixed with host triplet" >&5
+$as_echo "$as_me: WARNING: using cross tools not prefixed with host triplet" >&2;}
+ac_tool_warned=yes ;;
+esac
+ AS=$ac_ct_AS
+ fi
+else
+ AS="$ac_cv_prog_AS"
+fi
+
+ if test -n "$ac_tool_prefix"; then
+ # Extract the first word of "${ac_tool_prefix}dlltool", so it can be a program name with args.
+set dummy ${ac_tool_prefix}dlltool; ac_word=$2
+{ $as_echo "$as_me:${as_lineno-$LINENO}: checking for $ac_word" >&5
+$as_echo_n "checking for $ac_word... " >&6; }
+if test "${ac_cv_prog_DLLTOOL+set}" = set; then :
+ $as_echo_n "(cached) " >&6
+else
+ if test -n "$DLLTOOL"; then
+ ac_cv_prog_DLLTOOL="$DLLTOOL" # Let the user override the test.
+else
+as_save_IFS=$IFS; IFS=$PATH_SEPARATOR
+for as_dir in $PATH
+do
+ IFS=$as_save_IFS
+ test -z "$as_dir" && as_dir=.
+ for ac_exec_ext in '' $ac_executable_extensions; do
+ if { test -f "$as_dir/$ac_word$ac_exec_ext" && $as_test_x "$as_dir/$ac_word$ac_exec_ext"; }; then
+ ac_cv_prog_DLLTOOL="${ac_tool_prefix}dlltool"
+ $as_echo "$as_me:${as_lineno-$LINENO}: found $as_dir/$ac_word$ac_exec_ext" >&5
+ break 2
+ fi
+done
+ done
+IFS=$as_save_IFS
+
+fi
+fi
+DLLTOOL=$ac_cv_prog_DLLTOOL
+if test -n "$DLLTOOL"; then
+ { $as_echo "$as_me:${as_lineno-$LINENO}: result: $DLLTOOL" >&5
+$as_echo "$DLLTOOL" >&6; }
+else
+ { $as_echo "$as_me:${as_lineno-$LINENO}: result: no" >&5
+$as_echo "no" >&6; }
+fi
+
+
+fi
+if test -z "$ac_cv_prog_DLLTOOL"; then
+ ac_ct_DLLTOOL=$DLLTOOL
+ # Extract the first word of "dlltool", so it can be a program name with args.
+set dummy dlltool; ac_word=$2
+{ $as_echo "$as_me:${as_lineno-$LINENO}: checking for $ac_word" >&5
+$as_echo_n "checking for $ac_word... " >&6; }
+if test "${ac_cv_prog_ac_ct_DLLTOOL+set}" = set; then :
+ $as_echo_n "(cached) " >&6
+else
+ if test -n "$ac_ct_DLLTOOL"; then
+ ac_cv_prog_ac_ct_DLLTOOL="$ac_ct_DLLTOOL" # Let the user override the test.
+else
+as_save_IFS=$IFS; IFS=$PATH_SEPARATOR
+for as_dir in $PATH
+do
+ IFS=$as_save_IFS
+ test -z "$as_dir" && as_dir=.
+ for ac_exec_ext in '' $ac_executable_extensions; do
+ if { test -f "$as_dir/$ac_word$ac_exec_ext" && $as_test_x "$as_dir/$ac_word$ac_exec_ext"; }; then
+ ac_cv_prog_ac_ct_DLLTOOL="dlltool"
+ $as_echo "$as_me:${as_lineno-$LINENO}: found $as_dir/$ac_word$ac_exec_ext" >&5
+ break 2
+ fi
+done
+ done
+IFS=$as_save_IFS
+
+fi
+fi
+ac_ct_DLLTOOL=$ac_cv_prog_ac_ct_DLLTOOL
+if test -n "$ac_ct_DLLTOOL"; then
+ { $as_echo "$as_me:${as_lineno-$LINENO}: result: $ac_ct_DLLTOOL" >&5
+$as_echo "$ac_ct_DLLTOOL" >&6; }
+else
+ { $as_echo "$as_me:${as_lineno-$LINENO}: result: no" >&5
+$as_echo "no" >&6; }
+fi
+
+ if test "x$ac_ct_DLLTOOL" = x; then
+ DLLTOOL="false"
+ else
+ case $cross_compiling:$ac_tool_warned in
+yes:)
+{ $as_echo "$as_me:${as_lineno-$LINENO}: WARNING: using cross tools not prefixed with host triplet" >&5
+$as_echo "$as_me: WARNING: using cross tools not prefixed with host triplet" >&2;}
+ac_tool_warned=yes ;;
+esac
+ DLLTOOL=$ac_ct_DLLTOOL
+ fi
+else
+ DLLTOOL="$ac_cv_prog_DLLTOOL"
+fi
+
+ if test -n "$ac_tool_prefix"; then
+ # Extract the first word of "${ac_tool_prefix}objdump", so it can be a program name with args.
+set dummy ${ac_tool_prefix}objdump; ac_word=$2
+{ $as_echo "$as_me:${as_lineno-$LINENO}: checking for $ac_word" >&5
+$as_echo_n "checking for $ac_word... " >&6; }
+if test "${ac_cv_prog_OBJDUMP+set}" = set; then :
+ $as_echo_n "(cached) " >&6
+else
+ if test -n "$OBJDUMP"; then
+ ac_cv_prog_OBJDUMP="$OBJDUMP" # Let the user override the test.
+else
+as_save_IFS=$IFS; IFS=$PATH_SEPARATOR
+for as_dir in $PATH
+do
+ IFS=$as_save_IFS
+ test -z "$as_dir" && as_dir=.
+ for ac_exec_ext in '' $ac_executable_extensions; do
+ if { test -f "$as_dir/$ac_word$ac_exec_ext" && $as_test_x "$as_dir/$ac_word$ac_exec_ext"; }; then
+ ac_cv_prog_OBJDUMP="${ac_tool_prefix}objdump"
+ $as_echo "$as_me:${as_lineno-$LINENO}: found $as_dir/$ac_word$ac_exec_ext" >&5
+ break 2
+ fi
+done
+ done
+IFS=$as_save_IFS
+
+fi
+fi
+OBJDUMP=$ac_cv_prog_OBJDUMP
+if test -n "$OBJDUMP"; then
+ { $as_echo "$as_me:${as_lineno-$LINENO}: result: $OBJDUMP" >&5
+$as_echo "$OBJDUMP" >&6; }
+else
+ { $as_echo "$as_me:${as_lineno-$LINENO}: result: no" >&5
+$as_echo "no" >&6; }
+fi
+
+
+fi
+if test -z "$ac_cv_prog_OBJDUMP"; then
+ ac_ct_OBJDUMP=$OBJDUMP
+ # Extract the first word of "objdump", so it can be a program name with args.
+set dummy objdump; ac_word=$2
+{ $as_echo "$as_me:${as_lineno-$LINENO}: checking for $ac_word" >&5
+$as_echo_n "checking for $ac_word... " >&6; }
+if test "${ac_cv_prog_ac_ct_OBJDUMP+set}" = set; then :
+ $as_echo_n "(cached) " >&6
+else
+ if test -n "$ac_ct_OBJDUMP"; then
+ ac_cv_prog_ac_ct_OBJDUMP="$ac_ct_OBJDUMP" # Let the user override the test.
+else
+as_save_IFS=$IFS; IFS=$PATH_SEPARATOR
+for as_dir in $PATH
+do
+ IFS=$as_save_IFS
+ test -z "$as_dir" && as_dir=.
+ for ac_exec_ext in '' $ac_executable_extensions; do
+ if { test -f "$as_dir/$ac_word$ac_exec_ext" && $as_test_x "$as_dir/$ac_word$ac_exec_ext"; }; then
+ ac_cv_prog_ac_ct_OBJDUMP="objdump"
+ $as_echo "$as_me:${as_lineno-$LINENO}: found $as_dir/$ac_word$ac_exec_ext" >&5
+ break 2
+ fi
+done
+ done
+IFS=$as_save_IFS
+
+fi
+fi
+ac_ct_OBJDUMP=$ac_cv_prog_ac_ct_OBJDUMP
+if test -n "$ac_ct_OBJDUMP"; then
+ { $as_echo "$as_me:${as_lineno-$LINENO}: result: $ac_ct_OBJDUMP" >&5
+$as_echo "$ac_ct_OBJDUMP" >&6; }
+else
+ { $as_echo "$as_me:${as_lineno-$LINENO}: result: no" >&5
+$as_echo "no" >&6; }
+fi
+
+ if test "x$ac_ct_OBJDUMP" = x; then
+ OBJDUMP="false"
+ else
+ case $cross_compiling:$ac_tool_warned in
+yes:)
+{ $as_echo "$as_me:${as_lineno-$LINENO}: WARNING: using cross tools not prefixed with host triplet" >&5
+$as_echo "$as_me: WARNING: using cross tools not prefixed with host triplet" >&2;}
+ac_tool_warned=yes ;;
+esac
+ OBJDUMP=$ac_ct_OBJDUMP
+ fi
+else
+ OBJDUMP="$ac_cv_prog_OBJDUMP"
+fi
+
+ ;;
+esac
+
+test -z "$AS" && AS=as
+
+
+
+
+
+test -z "$DLLTOOL" && DLLTOOL=dlltool
+
+
+
+
+
+test -z "$OBJDUMP" && OBJDUMP=objdump
+
+
+
+
+
+
+
+ enable_dlopen=no
+
+
+
+ # Check whether --enable-shared was given.
+if test "${enable_shared+set}" = set; then :
+ enableval=$enable_shared; p=${PACKAGE-default}
+ case $enableval in
+ yes) enable_shared=yes ;;
+ no) enable_shared=no ;;
+ *)
+ enable_shared=no
+ # Look at the argument we got. We use all the common list separators.
+ lt_save_ifs="$IFS"; IFS="${IFS}$PATH_SEPARATOR,"
+ for pkg in $enableval; do
+ IFS="$lt_save_ifs"
+ if test "X$pkg" = "X$p"; then
+ enable_shared=yes
+ fi
+ done
+ IFS="$lt_save_ifs"
+ ;;
+ esac
+else
+ enable_shared=yes
+fi
+
+
+
+
+
+
+
+
+
+ # Check whether --enable-static was given.
+if test "${enable_static+set}" = set; then :
+ enableval=$enable_static; p=${PACKAGE-default}
+ case $enableval in
+ yes) enable_static=yes ;;
+ no) enable_static=no ;;
+ *)
+ enable_static=no
+ # Look at the argument we got. We use all the common list separators.
+ lt_save_ifs="$IFS"; IFS="${IFS}$PATH_SEPARATOR,"
+ for pkg in $enableval; do
+ IFS="$lt_save_ifs"
+ if test "X$pkg" = "X$p"; then
+ enable_static=yes
+ fi
+ done
+ IFS="$lt_save_ifs"
+ ;;
+ esac
+else
+ enable_static=yes
+fi
+
+
+
+
+
+
+
+
+
+
+# Check whether --with-pic was given.
+if test "${with_pic+set}" = set; then :
+ withval=$with_pic; pic_mode="$withval"
+else
+ pic_mode=default
+fi
+
+
+test -z "$pic_mode" && pic_mode=default
+
+
+
+
+
+
+
+ # Check whether --enable-fast-install was given.
+if test "${enable_fast_install+set}" = set; then :
+ enableval=$enable_fast_install; p=${PACKAGE-default}
+ case $enableval in
+ yes) enable_fast_install=yes ;;
+ no) enable_fast_install=no ;;
+ *)
+ enable_fast_install=no
+ # Look at the argument we got. We use all the common list separators.
+ lt_save_ifs="$IFS"; IFS="${IFS}$PATH_SEPARATOR,"
+ for pkg in $enableval; do
+ IFS="$lt_save_ifs"
+ if test "X$pkg" = "X$p"; then
+ enable_fast_install=yes
+ fi
+ done
+ IFS="$lt_save_ifs"
+ ;;
+ esac
+else
+ enable_fast_install=yes
+fi
+
+
+
+
+
+
+
+
+
+
+
+# This can be used to rebuild libtool when needed
+LIBTOOL_DEPS="$ltmain"
+
+# Always use our own libtool.
+LIBTOOL='$(SHELL) $(top_builddir)/libtool'
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+test -z "$LN_S" && LN_S="ln -s"
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+if test -n "${ZSH_VERSION+set}" ; then
+ setopt NO_GLOB_SUBST
+fi
+
+{ $as_echo "$as_me:${as_lineno-$LINENO}: checking for objdir" >&5
+$as_echo_n "checking for objdir... " >&6; }
+if test "${lt_cv_objdir+set}" = set; then :
+ $as_echo_n "(cached) " >&6
+else
+ rm -f .libs 2>/dev/null
+mkdir .libs 2>/dev/null
+if test -d .libs; then
+ lt_cv_objdir=.libs
+else
+ # MS-DOS does not allow filenames that begin with a dot.
+ lt_cv_objdir=_libs
+fi
+rmdir .libs 2>/dev/null
+fi
+{ $as_echo "$as_me:${as_lineno-$LINENO}: result: $lt_cv_objdir" >&5
+$as_echo "$lt_cv_objdir" >&6; }
+objdir=$lt_cv_objdir
+
+
+
+
+
+cat >>confdefs.h <<_ACEOF
+#define LT_OBJDIR "$lt_cv_objdir/"
+_ACEOF
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+case $host_os in
+aix3*)
+ # AIX sometimes has problems with the GCC collect2 program. For some
+ # reason, if we set the COLLECT_NAMES environment variable, the problems
+ # vanish in a puff of smoke.
+ if test "X${COLLECT_NAMES+set}" != Xset; then
+ COLLECT_NAMES=
+ export COLLECT_NAMES
+ fi
+ ;;
+esac
+
+# Sed substitution that helps us do robust quoting. It backslashifies
+# metacharacters that are still active within double-quoted strings.
+sed_quote_subst='s/\(["`$\\]\)/\\\1/g'
+
+# Same as above, but do not quote variable references.
+double_quote_subst='s/\(["`\\]\)/\\\1/g'
+
+# Sed substitution to delay expansion of an escaped shell variable in a
+# double_quote_subst'ed string.
+delay_variable_subst='s/\\\\\\\\\\\$/\\\\\\$/g'
+
+# Sed substitution to delay expansion of an escaped single quote.
+delay_single_quote_subst='s/'\''/'\'\\\\\\\'\''/g'
+
+# Sed substitution to avoid accidental globbing in evaled expressions
+no_glob_subst='s/\*/\\\*/g'
+
+# Global variables:
+ofile=libtool
+can_build_shared=yes
+
+# All known linkers require a `.a' archive for static linking (except MSVC,
+# which needs '.lib').
+libext=a
+
+with_gnu_ld="$lt_cv_prog_gnu_ld"
+
+old_CC="$CC"
+old_CFLAGS="$CFLAGS"
+
+# Set sane defaults for various variables
+test -z "$CC" && CC=cc
+test -z "$LTCC" && LTCC=$CC
+test -z "$LTCFLAGS" && LTCFLAGS=$CFLAGS
+test -z "$LD" && LD=ld
+test -z "$ac_objext" && ac_objext=o
+
+for cc_temp in $compiler""; do
+ case $cc_temp in
+ compile | *[\\/]compile | ccache | *[\\/]ccache ) ;;
+ distcc | *[\\/]distcc | purify | *[\\/]purify ) ;;
+ \-*) ;;
+ *) break;;
+ esac
+done
+cc_basename=`$ECHO "X$cc_temp" | $Xsed -e 's%.*/%%' -e "s%^$host_alias-%%"`
+
+
+# Only perform the check for file, if the check method requires it
+test -z "$MAGIC_CMD" && MAGIC_CMD=file
+case $deplibs_check_method in
+file_magic*)
+ if test "$file_magic_cmd" = '$MAGIC_CMD'; then
+ { $as_echo "$as_me:${as_lineno-$LINENO}: checking for ${ac_tool_prefix}file" >&5
+$as_echo_n "checking for ${ac_tool_prefix}file... " >&6; }
+if test "${lt_cv_path_MAGIC_CMD+set}" = set; then :
+ $as_echo_n "(cached) " >&6
+else
+ case $MAGIC_CMD in
+[\\/*] | ?:[\\/]*)
+ lt_cv_path_MAGIC_CMD="$MAGIC_CMD" # Let the user override the test with a path.
+ ;;
+*)
+ lt_save_MAGIC_CMD="$MAGIC_CMD"
+ lt_save_ifs="$IFS"; IFS=$PATH_SEPARATOR
+ ac_dummy="/usr/bin$PATH_SEPARATOR$PATH"
+ for ac_dir in $ac_dummy; do
+ IFS="$lt_save_ifs"
+ test -z "$ac_dir" && ac_dir=.
+ if test -f $ac_dir/${ac_tool_prefix}file; then
+ lt_cv_path_MAGIC_CMD="$ac_dir/${ac_tool_prefix}file"
+ if test -n "$file_magic_test_file"; then
+ case $deplibs_check_method in
+ "file_magic "*)
+ file_magic_regex=`expr "$deplibs_check_method" : "file_magic \(.*\)"`
+ MAGIC_CMD="$lt_cv_path_MAGIC_CMD"
+ if eval $file_magic_cmd \$file_magic_test_file 2> /dev/null |
+ $EGREP "$file_magic_regex" > /dev/null; then
+ :
+ else
+ cat <<_LT_EOF 1>&2
+
+*** Warning: the command libtool uses to detect shared libraries,
+*** $file_magic_cmd, produces output that libtool cannot recognize.
+*** The result is that libtool may fail to recognize shared libraries
+*** as such. This will affect the creation of libtool libraries that
+*** depend on shared libraries, but programs linked with such libtool
+*** libraries will work regardless of this problem. Nevertheless, you
+*** may want to report the problem to your system manager and/or to
+*** bug-libtool@gnu.org
+
+_LT_EOF
+ fi ;;
+ esac
+ fi
+ break
+ fi
+ done
+ IFS="$lt_save_ifs"
+ MAGIC_CMD="$lt_save_MAGIC_CMD"
+ ;;
+esac
+fi
+
+MAGIC_CMD="$lt_cv_path_MAGIC_CMD"
+if test -n "$MAGIC_CMD"; then
+ { $as_echo "$as_me:${as_lineno-$LINENO}: result: $MAGIC_CMD" >&5
+$as_echo "$MAGIC_CMD" >&6; }
+else
+ { $as_echo "$as_me:${as_lineno-$LINENO}: result: no" >&5
+$as_echo "no" >&6; }
+fi
+
+
+
+
+
+if test -z "$lt_cv_path_MAGIC_CMD"; then
+ if test -n "$ac_tool_prefix"; then
+ { $as_echo "$as_me:${as_lineno-$LINENO}: checking for file" >&5
+$as_echo_n "checking for file... " >&6; }
+if test "${lt_cv_path_MAGIC_CMD+set}" = set; then :
+ $as_echo_n "(cached) " >&6
+else
+ case $MAGIC_CMD in
+[\\/*] | ?:[\\/]*)
+ lt_cv_path_MAGIC_CMD="$MAGIC_CMD" # Let the user override the test with a path.
+ ;;
+*)
+ lt_save_MAGIC_CMD="$MAGIC_CMD"
+ lt_save_ifs="$IFS"; IFS=$PATH_SEPARATOR
+ ac_dummy="/usr/bin$PATH_SEPARATOR$PATH"
+ for ac_dir in $ac_dummy; do
+ IFS="$lt_save_ifs"
+ test -z "$ac_dir" && ac_dir=.
+ if test -f $ac_dir/file; then
+ lt_cv_path_MAGIC_CMD="$ac_dir/file"
+ if test -n "$file_magic_test_file"; then
+ case $deplibs_check_method in
+ "file_magic "*)
+ file_magic_regex=`expr "$deplibs_check_method" : "file_magic \(.*\)"`
+ MAGIC_CMD="$lt_cv_path_MAGIC_CMD"
+ if eval $file_magic_cmd \$file_magic_test_file 2> /dev/null |
+ $EGREP "$file_magic_regex" > /dev/null; then
+ :
+ else
+ cat <<_LT_EOF 1>&2
+
+*** Warning: the command libtool uses to detect shared libraries,
+*** $file_magic_cmd, produces output that libtool cannot recognize.
+*** The result is that libtool may fail to recognize shared libraries
+*** as such. This will affect the creation of libtool libraries that
+*** depend on shared libraries, but programs linked with such libtool
+*** libraries will work regardless of this problem. Nevertheless, you
+*** may want to report the problem to your system manager and/or to
+*** bug-libtool@gnu.org
+
+_LT_EOF
+ fi ;;
+ esac
+ fi
+ break
+ fi
+ done
+ IFS="$lt_save_ifs"
+ MAGIC_CMD="$lt_save_MAGIC_CMD"
+ ;;
+esac
+fi
+
+MAGIC_CMD="$lt_cv_path_MAGIC_CMD"
+if test -n "$MAGIC_CMD"; then
+ { $as_echo "$as_me:${as_lineno-$LINENO}: result: $MAGIC_CMD" >&5
+$as_echo "$MAGIC_CMD" >&6; }
+else
+ { $as_echo "$as_me:${as_lineno-$LINENO}: result: no" >&5
+$as_echo "no" >&6; }
+fi
+
+
+ else
+ MAGIC_CMD=:
+ fi
+fi
+
+ fi
+ ;;
+esac
+
+# Use C for the default configuration in the libtool script
+
+lt_save_CC="$CC"
+ac_ext=c
+ac_cpp='$CPP $CPPFLAGS'
+ac_compile='$CC -c $CFLAGS $CPPFLAGS conftest.$ac_ext >&5'
+ac_link='$CC -o conftest$ac_exeext $CFLAGS $CPPFLAGS $LDFLAGS conftest.$ac_ext $LIBS >&5'
+ac_compiler_gnu=$ac_cv_c_compiler_gnu
+
+
+# Source file extension for C test sources.
+ac_ext=c
+
+# Object file extension for compiled C test sources.
+objext=o
+objext=$objext
+
+# Code to be used in simple compile tests
+lt_simple_compile_test_code="int some_variable = 0;"
+
+# Code to be used in simple link tests
+lt_simple_link_test_code='int main(){return(0);}'
+
+
+
+
+
+
+
+# If no C compiler was specified, use CC.
+LTCC=${LTCC-"$CC"}
+
+# If no C compiler flags were specified, use CFLAGS.
+LTCFLAGS=${LTCFLAGS-"$CFLAGS"}
+
+# Allow CC to be a program name with arguments.
+compiler=$CC
+
+# Save the default compiler, since it gets overwritten when the other
+# tags are being tested, and _LT_TAGVAR(compiler, []) is a NOP.
+compiler_DEFAULT=$CC
+
+# save warnings/boilerplate of simple test code
+ac_outfile=conftest.$ac_objext
+echo "$lt_simple_compile_test_code" >conftest.$ac_ext
+eval "$ac_compile" 2>&1 >/dev/null | $SED '/^$/d; /^ *+/d' >conftest.err
+_lt_compiler_boilerplate=`cat conftest.err`
+$RM conftest*
+
+ac_outfile=conftest.$ac_objext
+echo "$lt_simple_link_test_code" >conftest.$ac_ext
+eval "$ac_link" 2>&1 >/dev/null | $SED '/^$/d; /^ *+/d' >conftest.err
+_lt_linker_boilerplate=`cat conftest.err`
+$RM -r conftest*
+
+
+## CAVEAT EMPTOR:
+## There is no encapsulation within the following macros, do not change
+## the running order or otherwise move them around unless you know exactly
+## what you are doing...
+if test -n "$compiler"; then
+
+lt_prog_compiler_no_builtin_flag=
+
+if test "$GCC" = yes; then
+ lt_prog_compiler_no_builtin_flag=' -fno-builtin'
+
+ { $as_echo "$as_me:${as_lineno-$LINENO}: checking if $compiler supports -fno-rtti -fno-exceptions" >&5
+$as_echo_n "checking if $compiler supports -fno-rtti -fno-exceptions... " >&6; }
+if test "${lt_cv_prog_compiler_rtti_exceptions+set}" = set; then :
+ $as_echo_n "(cached) " >&6
+else
+ lt_cv_prog_compiler_rtti_exceptions=no
+ ac_outfile=conftest.$ac_objext
+ echo "$lt_simple_compile_test_code" > conftest.$ac_ext
+ lt_compiler_flag="-fno-rtti -fno-exceptions"
+ # Insert the option either (1) after the last *FLAGS variable, or
+ # (2) before a word containing "conftest.", or (3) at the end.
+ # Note that $ac_compile itself does not contain backslashes and begins
+ # with a dollar sign (not a hyphen), so the echo should work correctly.
+ # The option is referenced via a variable to avoid confusing sed.
+ lt_compile=`echo "$ac_compile" | $SED \
+ -e 's:.*FLAGS}\{0,1\} :&$lt_compiler_flag :; t' \
+ -e 's: [^ ]*conftest\.: $lt_compiler_flag&:; t' \
+ -e 's:$: $lt_compiler_flag:'`
+ (eval echo "\"\$as_me:10059: $lt_compile\"" >&5)
+ (eval "$lt_compile" 2>conftest.err)
+ ac_status=$?
+ cat conftest.err >&5
+ echo "$as_me:10063: \$? = $ac_status" >&5
+ if (exit $ac_status) && test -s "$ac_outfile"; then
+ # The compiler can only warn and ignore the option if not recognized
+ # So say no if there are warnings other than the usual output.
+ $ECHO "X$_lt_compiler_boilerplate" | $Xsed -e '/^$/d' >conftest.exp
+ $SED '/^$/d; /^ *+/d' conftest.err >conftest.er2
+ if test ! -s conftest.er2 || diff conftest.exp conftest.er2 >/dev/null; then
+ lt_cv_prog_compiler_rtti_exceptions=yes
+ fi
+ fi
+ $RM conftest*
+
+fi
+{ $as_echo "$as_me:${as_lineno-$LINENO}: result: $lt_cv_prog_compiler_rtti_exceptions" >&5
+$as_echo "$lt_cv_prog_compiler_rtti_exceptions" >&6; }
+
+if test x"$lt_cv_prog_compiler_rtti_exceptions" = xyes; then
+ lt_prog_compiler_no_builtin_flag="$lt_prog_compiler_no_builtin_flag -fno-rtti -fno-exceptions"
+else
+ :
+fi
+
+fi
+
+
+
+
+
+
+ lt_prog_compiler_wl=
+lt_prog_compiler_pic=
+lt_prog_compiler_static=
+
+{ $as_echo "$as_me:${as_lineno-$LINENO}: checking for $compiler option to produce PIC" >&5
+$as_echo_n "checking for $compiler option to produce PIC... " >&6; }
+
+ if test "$GCC" = yes; then
+ lt_prog_compiler_wl='-Wl,'
+ lt_prog_compiler_static='-static'
+
+ case $host_os in
+ aix*)
+ # All AIX code is PIC.
+ if test "$host_cpu" = ia64; then
+ # AIX 5 now supports IA64 processor
+ lt_prog_compiler_static='-Bstatic'
+ fi
+ ;;
+
+ amigaos*)
+ case $host_cpu in
+ powerpc)
+ # see comment about AmigaOS4 .so support
+ lt_prog_compiler_pic='-fPIC'
+ ;;
+ m68k)
+ # FIXME: we need at least 68020 code to build shared libraries, but
+ # adding the `-m68020' flag to GCC prevents building anything better,
+ # like `-m68040'.
+ lt_prog_compiler_pic='-m68020 -resident32 -malways-restore-a4'
+ ;;
+ esac
+ ;;
+
+ beos* | irix5* | irix6* | nonstopux* | osf3* | osf4* | osf5*)
+ # PIC is the default for these OSes.
+ ;;
+
+ mingw* | cygwin* | pw32* | os2* | cegcc*)
+ # This hack is so that the source file can tell whether it is being
+ # built for inclusion in a dll (and should export symbols for example).
+ # Although the cygwin gcc ignores -fPIC, still need this for old-style
+ # (--disable-auto-import) libraries
+ lt_prog_compiler_pic='-DDLL_EXPORT'
+ ;;
+
+ darwin* | rhapsody*)
+ # PIC is the default on this platform
+ # Common symbols not allowed in MH_DYLIB files
+ lt_prog_compiler_pic='-fno-common'
+ ;;
+
+ hpux*)
+ # PIC is the default for 64-bit PA HP-UX, but not for 32-bit
+ # PA HP-UX. On IA64 HP-UX, PIC is the default but the pic flag
+ # sets the default TLS model and affects inlining.
+ case $host_cpu in
+ hppa*64*)
+ # +Z the default
+ ;;
+ *)
+ lt_prog_compiler_pic='-fPIC'
+ ;;
+ esac
+ ;;
+
+ interix[3-9]*)
+ # Interix 3.x gcc -fpic/-fPIC options generate broken code.
+ # Instead, we relocate shared libraries at runtime.
+ ;;
+
+ msdosdjgpp*)
+ # Just because we use GCC doesn't mean we suddenly get shared libraries
+ # on systems that don't support them.
+ lt_prog_compiler_can_build_shared=no
+ enable_shared=no
+ ;;
+
+ *nto* | *qnx*)
+ # QNX uses GNU C++, but need to define -shared option too, otherwise
+ # it will coredump.
+ lt_prog_compiler_pic='-fPIC -shared'
+ ;;
+
+ sysv4*MP*)
+ if test -d /usr/nec; then
+ lt_prog_compiler_pic=-Kconform_pic
+ fi
+ ;;
+
+ *)
+ lt_prog_compiler_pic='-fPIC'
+ ;;
+ esac
+ else
+ # PORTME Check for flag to pass linker flags through the system compiler.
+ case $host_os in
+ aix*)
+ lt_prog_compiler_wl='-Wl,'
+ if test "$host_cpu" = ia64; then
+ # AIX 5 now supports IA64 processor
+ lt_prog_compiler_static='-Bstatic'
+ else
+ lt_prog_compiler_static='-bnso -bI:/lib/syscalls.exp'
+ fi
+ ;;
+
+ mingw* | cygwin* | pw32* | os2* | cegcc*)
+ # This hack is so that the source file can tell whether it is being
+ # built for inclusion in a dll (and should export symbols for example).
+ lt_prog_compiler_pic='-DDLL_EXPORT'
+ ;;
+
+ hpux9* | hpux10* | hpux11*)
+ lt_prog_compiler_wl='-Wl,'
+ # PIC is the default for IA64 HP-UX and 64-bit HP-UX, but
+ # not for PA HP-UX.
+ case $host_cpu in
+ hppa*64*|ia64*)
+ # +Z the default
+ ;;
+ *)
+ lt_prog_compiler_pic='+Z'
+ ;;
+ esac
+ # Is there a better lt_prog_compiler_static that works with the bundled CC?
+ lt_prog_compiler_static='${wl}-a ${wl}archive'
+ ;;
+
+ irix5* | irix6* | nonstopux*)
+ lt_prog_compiler_wl='-Wl,'
+ # PIC (with -KPIC) is the default.
+ lt_prog_compiler_static='-non_shared'
+ ;;
+
+ linux* | k*bsd*-gnu)
+ case $cc_basename in
+ # old Intel for x86_64 which still supported -KPIC.
+ ecc*)
+ lt_prog_compiler_wl='-Wl,'
+ lt_prog_compiler_pic='-KPIC'
+ lt_prog_compiler_static='-static'
+ ;;
+ # icc used to be incompatible with GCC.
+ # ICC 10 doesn't accept -KPIC any more.
+ icc* | ifort*)
+ lt_prog_compiler_wl='-Wl,'
+ lt_prog_compiler_pic='-fPIC'
+ lt_prog_compiler_static='-static'
+ ;;
+ # Lahey Fortran 8.1.
+ lf95*)
+ lt_prog_compiler_wl='-Wl,'
+ lt_prog_compiler_pic='--shared'
+ lt_prog_compiler_static='--static'
+ ;;
+ pgcc* | pgf77* | pgf90* | pgf95*)
+ # Portland Group compilers (*not* the Pentium gcc compiler,
+ # which looks to be a dead project)
+ lt_prog_compiler_wl='-Wl,'
+ lt_prog_compiler_pic='-fpic'
+ lt_prog_compiler_static='-Bstatic'
+ ;;
+ ccc*)
+ lt_prog_compiler_wl='-Wl,'
+ # All Alpha code is PIC.
+ lt_prog_compiler_static='-non_shared'
+ ;;
+ xl*)
+ # IBM XL C 8.0/Fortran 10.1 on PPC
+ lt_prog_compiler_wl='-Wl,'
+ lt_prog_compiler_pic='-qpic'
+ lt_prog_compiler_static='-qstaticlink'
+ ;;
+ *)
+ case `$CC -V 2>&1 | sed 5q` in
+ *Sun\ C*)
+ # Sun C 5.9
+ lt_prog_compiler_pic='-KPIC'
+ lt_prog_compiler_static='-Bstatic'
+ lt_prog_compiler_wl='-Wl,'
+ ;;
+ *Sun\ F*)
+ # Sun Fortran 8.3 passes all unrecognized flags to the linker
+ lt_prog_compiler_pic='-KPIC'
+ lt_prog_compiler_static='-Bstatic'
+ lt_prog_compiler_wl=''
+ ;;
+ esac
+ ;;
+ esac
+ ;;
+
+ newsos6)
+ lt_prog_compiler_pic='-KPIC'
+ lt_prog_compiler_static='-Bstatic'
+ ;;
+
+ *nto* | *qnx*)
+ # QNX uses GNU C++, but need to define -shared option too, otherwise
+ # it will coredump.
+ lt_prog_compiler_pic='-fPIC -shared'
+ ;;
+
+ osf3* | osf4* | osf5*)
+ lt_prog_compiler_wl='-Wl,'
+ # All OSF/1 code is PIC.
+ lt_prog_compiler_static='-non_shared'
+ ;;
+
+ rdos*)
+ lt_prog_compiler_static='-non_shared'
+ ;;
+
+ solaris*)
+ lt_prog_compiler_pic='-KPIC'
+ lt_prog_compiler_static='-Bstatic'
+ case $cc_basename in
+ f77* | f90* | f95*)
+ lt_prog_compiler_wl='-Qoption ld ';;
+ *)
+ lt_prog_compiler_wl='-Wl,';;
+ esac
+ ;;
+
+ sunos4*)
+ lt_prog_compiler_wl='-Qoption ld '
+ lt_prog_compiler_pic='-PIC'
+ lt_prog_compiler_static='-Bstatic'
+ ;;
+
+ sysv4 | sysv4.2uw2* | sysv4.3*)
+ lt_prog_compiler_wl='-Wl,'
+ lt_prog_compiler_pic='-KPIC'
+ lt_prog_compiler_static='-Bstatic'
+ ;;
+
+ sysv4*MP*)
+ if test -d /usr/nec ;then
+ lt_prog_compiler_pic='-Kconform_pic'
+ lt_prog_compiler_static='-Bstatic'
+ fi
+ ;;
+
+ sysv5* | unixware* | sco3.2v5* | sco5v6* | OpenUNIX*)
+ lt_prog_compiler_wl='-Wl,'
+ lt_prog_compiler_pic='-KPIC'
+ lt_prog_compiler_static='-Bstatic'
+ ;;
+
+ unicos*)
+ lt_prog_compiler_wl='-Wl,'
+ lt_prog_compiler_can_build_shared=no
+ ;;
+
+ uts4*)
+ lt_prog_compiler_pic='-pic'
+ lt_prog_compiler_static='-Bstatic'
+ ;;
+
+ *)
+ lt_prog_compiler_can_build_shared=no
+ ;;
+ esac
+ fi
+
+case $host_os in
+ # For platforms which do not support PIC, -DPIC is meaningless:
+ *djgpp*)
+ lt_prog_compiler_pic=
+ ;;
+ *)
+ lt_prog_compiler_pic="$lt_prog_compiler_pic -DPIC"
+ ;;
+esac
+{ $as_echo "$as_me:${as_lineno-$LINENO}: result: $lt_prog_compiler_pic" >&5
+$as_echo "$lt_prog_compiler_pic" >&6; }
+
+
+
+
+
+
+#
+# Check to make sure the PIC flag actually works.
+#
+if test -n "$lt_prog_compiler_pic"; then
+ { $as_echo "$as_me:${as_lineno-$LINENO}: checking if $compiler PIC flag $lt_prog_compiler_pic works" >&5
+$as_echo_n "checking if $compiler PIC flag $lt_prog_compiler_pic works... " >&6; }
+if test "${lt_cv_prog_compiler_pic_works+set}" = set; then :
+ $as_echo_n "(cached) " >&6
+else
+ lt_cv_prog_compiler_pic_works=no
+ ac_outfile=conftest.$ac_objext
+ echo "$lt_simple_compile_test_code" > conftest.$ac_ext
+ lt_compiler_flag="$lt_prog_compiler_pic -DPIC"
+ # Insert the option either (1) after the last *FLAGS variable, or
+ # (2) before a word containing "conftest.", or (3) at the end.
+ # Note that $ac_compile itself does not contain backslashes and begins
+ # with a dollar sign (not a hyphen), so the echo should work correctly.
+ # The option is referenced via a variable to avoid confusing sed.
+ lt_compile=`echo "$ac_compile" | $SED \
+ -e 's:.*FLAGS}\{0,1\} :&$lt_compiler_flag :; t' \
+ -e 's: [^ ]*conftest\.: $lt_compiler_flag&:; t' \
+ -e 's:$: $lt_compiler_flag:'`
+ (eval echo "\"\$as_me:10398: $lt_compile\"" >&5)
+ (eval "$lt_compile" 2>conftest.err)
+ ac_status=$?
+ cat conftest.err >&5
+ echo "$as_me:10402: \$? = $ac_status" >&5
+ if (exit $ac_status) && test -s "$ac_outfile"; then
+ # The compiler can only warn and ignore the option if not recognized
+ # So say no if there are warnings other than the usual output.
+ $ECHO "X$_lt_compiler_boilerplate" | $Xsed -e '/^$/d' >conftest.exp
+ $SED '/^$/d; /^ *+/d' conftest.err >conftest.er2
+ if test ! -s conftest.er2 || diff conftest.exp conftest.er2 >/dev/null; then
+ lt_cv_prog_compiler_pic_works=yes
+ fi
+ fi
+ $RM conftest*
+
+fi
+{ $as_echo "$as_me:${as_lineno-$LINENO}: result: $lt_cv_prog_compiler_pic_works" >&5
+$as_echo "$lt_cv_prog_compiler_pic_works" >&6; }
+
+if test x"$lt_cv_prog_compiler_pic_works" = xyes; then
+ case $lt_prog_compiler_pic in
+ "" | " "*) ;;
+ *) lt_prog_compiler_pic=" $lt_prog_compiler_pic" ;;
+ esac
+else
+ lt_prog_compiler_pic=
+ lt_prog_compiler_can_build_shared=no
+fi
+
+fi
+
+
+
+
+
+
+#
+# Check to make sure the static flag actually works.
+#
+wl=$lt_prog_compiler_wl eval lt_tmp_static_flag=\"$lt_prog_compiler_static\"
+{ $as_echo "$as_me:${as_lineno-$LINENO}: checking if $compiler static flag $lt_tmp_static_flag works" >&5
+$as_echo_n "checking if $compiler static flag $lt_tmp_static_flag works... " >&6; }
+if test "${lt_cv_prog_compiler_static_works+set}" = set; then :
+ $as_echo_n "(cached) " >&6
+else
+ lt_cv_prog_compiler_static_works=no
+ save_LDFLAGS="$LDFLAGS"
+ LDFLAGS="$LDFLAGS $lt_tmp_static_flag"
+ echo "$lt_simple_link_test_code" > conftest.$ac_ext
+ if (eval $ac_link 2>conftest.err) && test -s conftest$ac_exeext; then
+ # The linker can only warn and ignore the option if not recognized
+ # So say no if there are warnings
+ if test -s conftest.err; then
+ # Append any errors to the config.log.
+ cat conftest.err 1>&5
+ $ECHO "X$_lt_linker_boilerplate" | $Xsed -e '/^$/d' > conftest.exp
+ $SED '/^$/d; /^ *+/d' conftest.err >conftest.er2
+ if diff conftest.exp conftest.er2 >/dev/null; then
+ lt_cv_prog_compiler_static_works=yes
+ fi
+ else
+ lt_cv_prog_compiler_static_works=yes
+ fi
+ fi
+ $RM -r conftest*
+ LDFLAGS="$save_LDFLAGS"
+
+fi
+{ $as_echo "$as_me:${as_lineno-$LINENO}: result: $lt_cv_prog_compiler_static_works" >&5
+$as_echo "$lt_cv_prog_compiler_static_works" >&6; }
+
+if test x"$lt_cv_prog_compiler_static_works" = xyes; then
+ :
+else
+ lt_prog_compiler_static=
+fi
+
+
+
+
+
+
+
+ { $as_echo "$as_me:${as_lineno-$LINENO}: checking if $compiler supports -c -o file.$ac_objext" >&5
+$as_echo_n "checking if $compiler supports -c -o file.$ac_objext... " >&6; }
+if test "${lt_cv_prog_compiler_c_o+set}" = set; then :
+ $as_echo_n "(cached) " >&6
+else
+ lt_cv_prog_compiler_c_o=no
+ $RM -r conftest 2>/dev/null
+ mkdir conftest
+ cd conftest
+ mkdir out
+ echo "$lt_simple_compile_test_code" > conftest.$ac_ext
+
+ lt_compiler_flag="-o out/conftest2.$ac_objext"
+ # Insert the option either (1) after the last *FLAGS variable, or
+ # (2) before a word containing "conftest.", or (3) at the end.
+ # Note that $ac_compile itself does not contain backslashes and begins
+ # with a dollar sign (not a hyphen), so the echo should work correctly.
+ lt_compile=`echo "$ac_compile" | $SED \
+ -e 's:.*FLAGS}\{0,1\} :&$lt_compiler_flag :; t' \
+ -e 's: [^ ]*conftest\.: $lt_compiler_flag&:; t' \
+ -e 's:$: $lt_compiler_flag:'`
+ (eval echo "\"\$as_me:10503: $lt_compile\"" >&5)
+ (eval "$lt_compile" 2>out/conftest.err)
+ ac_status=$?
+ cat out/conftest.err >&5
+ echo "$as_me:10507: \$? = $ac_status" >&5
+ if (exit $ac_status) && test -s out/conftest2.$ac_objext
+ then
+ # The compiler can only warn and ignore the option if not recognized
+ # So say no if there are warnings
+ $ECHO "X$_lt_compiler_boilerplate" | $Xsed -e '/^$/d' > out/conftest.exp
+ $SED '/^$/d; /^ *+/d' out/conftest.err >out/conftest.er2
+ if test ! -s out/conftest.er2 || diff out/conftest.exp out/conftest.er2 >/dev/null; then
+ lt_cv_prog_compiler_c_o=yes
+ fi
+ fi
+ chmod u+w . 2>&5
+ $RM conftest*
+ # SGI C++ compiler will create directory out/ii_files/ for
+ # template instantiation
+ test -d out/ii_files && $RM out/ii_files/* && rmdir out/ii_files
+ $RM out/* && rmdir out
+ cd ..
+ $RM -r conftest
+ $RM conftest*
+
+fi
+{ $as_echo "$as_me:${as_lineno-$LINENO}: result: $lt_cv_prog_compiler_c_o" >&5
+$as_echo "$lt_cv_prog_compiler_c_o" >&6; }
+
+
+
+
+
+
+ { $as_echo "$as_me:${as_lineno-$LINENO}: checking if $compiler supports -c -o file.$ac_objext" >&5
+$as_echo_n "checking if $compiler supports -c -o file.$ac_objext... " >&6; }
+if test "${lt_cv_prog_compiler_c_o+set}" = set; then :
+ $as_echo_n "(cached) " >&6
+else
+ lt_cv_prog_compiler_c_o=no
+ $RM -r conftest 2>/dev/null
+ mkdir conftest
+ cd conftest
+ mkdir out
+ echo "$lt_simple_compile_test_code" > conftest.$ac_ext
+
+ lt_compiler_flag="-o out/conftest2.$ac_objext"
+ # Insert the option either (1) after the last *FLAGS variable, or
+ # (2) before a word containing "conftest.", or (3) at the end.
+ # Note that $ac_compile itself does not contain backslashes and begins
+ # with a dollar sign (not a hyphen), so the echo should work correctly.
+ lt_compile=`echo "$ac_compile" | $SED \
+ -e 's:.*FLAGS}\{0,1\} :&$lt_compiler_flag :; t' \
+ -e 's: [^ ]*conftest\.: $lt_compiler_flag&:; t' \
+ -e 's:$: $lt_compiler_flag:'`
+ (eval echo "\"\$as_me:10558: $lt_compile\"" >&5)
+ (eval "$lt_compile" 2>out/conftest.err)
+ ac_status=$?
+ cat out/conftest.err >&5
+ echo "$as_me:10562: \$? = $ac_status" >&5
+ if (exit $ac_status) && test -s out/conftest2.$ac_objext
+ then
+ # The compiler can only warn and ignore the option if not recognized
+ # So say no if there are warnings
+ $ECHO "X$_lt_compiler_boilerplate" | $Xsed -e '/^$/d' > out/conftest.exp
+ $SED '/^$/d; /^ *+/d' out/conftest.err >out/conftest.er2
+ if test ! -s out/conftest.er2 || diff out/conftest.exp out/conftest.er2 >/dev/null; then
+ lt_cv_prog_compiler_c_o=yes
+ fi
+ fi
+ chmod u+w . 2>&5
+ $RM conftest*
+ # SGI C++ compiler will create directory out/ii_files/ for
+ # template instantiation
+ test -d out/ii_files && $RM out/ii_files/* && rmdir out/ii_files
+ $RM out/* && rmdir out
+ cd ..
+ $RM -r conftest
+ $RM conftest*
+
+fi
+{ $as_echo "$as_me:${as_lineno-$LINENO}: result: $lt_cv_prog_compiler_c_o" >&5
+$as_echo "$lt_cv_prog_compiler_c_o" >&6; }
+
+
+
+
+hard_links="nottested"
+if test "$lt_cv_prog_compiler_c_o" = no && test "$need_locks" != no; then
+ # do not overwrite the value of need_locks provided by the user
+ { $as_echo "$as_me:${as_lineno-$LINENO}: checking if we can lock with hard links" >&5
+$as_echo_n "checking if we can lock with hard links... " >&6; }
+ hard_links=yes
+ $RM conftest*
+ ln conftest.a conftest.b 2>/dev/null && hard_links=no
+ touch conftest.a
+ ln conftest.a conftest.b 2>&5 || hard_links=no
+ ln conftest.a conftest.b 2>/dev/null && hard_links=no
+ { $as_echo "$as_me:${as_lineno-$LINENO}: result: $hard_links" >&5
+$as_echo "$hard_links" >&6; }
+ if test "$hard_links" = no; then
+ { $as_echo "$as_me:${as_lineno-$LINENO}: WARNING: \`$CC' does not support \`-c -o', so \`make -j' may be unsafe" >&5
+$as_echo "$as_me: WARNING: \`$CC' does not support \`-c -o', so \`make -j' may be unsafe" >&2;}
+ need_locks=warn
+ fi
+else
+ need_locks=no
+fi
+
+
+
+
+
+
+ { $as_echo "$as_me:${as_lineno-$LINENO}: checking whether the $compiler linker ($LD) supports shared libraries" >&5
+$as_echo_n "checking whether the $compiler linker ($LD) supports shared libraries... " >&6; }
+
+ runpath_var=
+ allow_undefined_flag=
+ always_export_symbols=no
+ archive_cmds=
+ archive_expsym_cmds=
+ compiler_needs_object=no
+ enable_shared_with_static_runtimes=no
+ export_dynamic_flag_spec=
+ export_symbols_cmds='$NM $libobjs $convenience | $global_symbol_pipe | $SED '\''s/.* //'\'' | sort | uniq > $export_symbols'
+ hardcode_automatic=no
+ hardcode_direct=no
+ hardcode_direct_absolute=no
+ hardcode_libdir_flag_spec=
+ hardcode_libdir_flag_spec_ld=
+ hardcode_libdir_separator=
+ hardcode_minus_L=no
+ hardcode_shlibpath_var=unsupported
+ inherit_rpath=no
+ link_all_deplibs=unknown
+ module_cmds=
+ module_expsym_cmds=
+ old_archive_from_new_cmds=
+ old_archive_from_expsyms_cmds=
+ thread_safe_flag_spec=
+ whole_archive_flag_spec=
+ # include_expsyms should be a list of space-separated symbols to be *always*
+ # included in the symbol list
+ include_expsyms=
+ # exclude_expsyms can be an extended regexp of symbols to exclude
+ # it will be wrapped by ` (' and `)$', so one must not match beginning or
+ # end of line. Example: `a|bc|.*d.*' will exclude the symbols `a' and `bc',
+ # as well as any symbol that contains `d'.
+ exclude_expsyms='_GLOBAL_OFFSET_TABLE_|_GLOBAL__F[ID]_.*'
+ # Although _GLOBAL_OFFSET_TABLE_ is a valid symbol C name, most a.out
+ # platforms (ab)use it in PIC code, but their linkers get confused if
+ # the symbol is explicitly referenced. Since portable code cannot
+ # rely on this symbol name, it's probably fine to never include it in
+ # preloaded symbol tables.
+ # Exclude shared library initialization/finalization symbols.
+ extract_expsyms_cmds=
+
+ case $host_os in
+ cygwin* | mingw* | pw32* | cegcc*)
+ # FIXME: the MSVC++ port hasn't been tested in a loooong time
+ # When not using gcc, we currently assume that we are using
+ # Microsoft Visual C++.
+ if test "$GCC" != yes; then
+ with_gnu_ld=no
+ fi
+ ;;
+ interix*)
+ # we just hope/assume this is gcc and not c89 (= MSVC++)
+ with_gnu_ld=yes
+ ;;
+ openbsd*)
+ with_gnu_ld=no
+ ;;
+ esac
+
+ ld_shlibs=yes
+ if test "$with_gnu_ld" = yes; then
+ # If archive_cmds runs LD, not CC, wlarc should be empty
+ wlarc='${wl}'
+
+ # Set some defaults for GNU ld with shared library support. These
+ # are reset later if shared libraries are not supported. Putting them
+ # here allows them to be overridden if necessary.
+ runpath_var=LD_RUN_PATH
+ hardcode_libdir_flag_spec='${wl}-rpath ${wl}$libdir'
+ export_dynamic_flag_spec='${wl}--export-dynamic'
+ # ancient GNU ld didn't support --whole-archive et. al.
+ if $LD --help 2>&1 | $GREP 'no-whole-archive' > /dev/null; then
+ whole_archive_flag_spec="$wlarc"'--whole-archive$convenience '"$wlarc"'--no-whole-archive'
+ else
+ whole_archive_flag_spec=
+ fi
+ supports_anon_versioning=no
+ case `$LD -v 2>&1` in
+ *\ [01].* | *\ 2.[0-9].* | *\ 2.10.*) ;; # catch versions < 2.11
+ *\ 2.11.93.0.2\ *) supports_anon_versioning=yes ;; # RH7.3 ...
+ *\ 2.11.92.0.12\ *) supports_anon_versioning=yes ;; # Mandrake 8.2 ...
+ *\ 2.11.*) ;; # other 2.11 versions
+ *) supports_anon_versioning=yes ;;
+ esac
+
+ # See if GNU ld supports shared libraries.
+ case $host_os in
+ aix[3-9]*)
+ # On AIX/PPC, the GNU linker is very broken
+ if test "$host_cpu" != ia64; then
+ ld_shlibs=no
+ cat <<_LT_EOF 1>&2
+
+*** Warning: the GNU linker, at least up to release 2.9.1, is reported
+*** to be unable to reliably create shared libraries on AIX.
+*** Therefore, libtool is disabling shared libraries support. If you
+*** really care for shared libraries, you may want to modify your PATH
+*** so that a non-GNU linker is found, and then restart.
+
+_LT_EOF
+ fi
+ ;;
+
+ amigaos*)
+ case $host_cpu in
+ powerpc)
+ # see comment about AmigaOS4 .so support
+ archive_cmds='$CC -shared $libobjs $deplibs $compiler_flags ${wl}-soname $wl$soname -o $lib'
+ archive_expsym_cmds=''
+ ;;
+ m68k)
+ archive_cmds='$RM $output_objdir/a2ixlibrary.data~$ECHO "#define NAME $libname" > $output_objdir/a2ixlibrary.data~$ECHO "#define LIBRARY_ID 1" >> $output_objdir/a2ixlibrary.data~$ECHO "#define VERSION $major" >> $output_objdir/a2ixlibrary.data~$ECHO "#define REVISION $revision" >> $output_objdir/a2ixlibrary.data~$AR $AR_FLAGS $lib $libobjs~$RANLIB $lib~(cd $output_objdir && a2ixlibrary -32)'
+ hardcode_libdir_flag_spec='-L$libdir'
+ hardcode_minus_L=yes
+ ;;
+ esac
+ ;;
+
+ beos*)
+ if $LD --help 2>&1 | $GREP ': supported targets:.* elf' > /dev/null; then
+ allow_undefined_flag=unsupported
+ # Joseph Beckenbach <jrb3@best.com> says some releases of gcc
+ # support --undefined. This deserves some investigation. FIXME
+ archive_cmds='$CC -nostart $libobjs $deplibs $compiler_flags ${wl}-soname $wl$soname -o $lib'
+ else
+ ld_shlibs=no
+ fi
+ ;;
+
+ cygwin* | mingw* | pw32* | cegcc*)
+ # _LT_TAGVAR(hardcode_libdir_flag_spec, ) is actually meaningless,
+ # as there is no search path for DLLs.
+ hardcode_libdir_flag_spec='-L$libdir'
+ allow_undefined_flag=unsupported
+ always_export_symbols=no
+ enable_shared_with_static_runtimes=yes
+ export_symbols_cmds='$NM $libobjs $convenience | $global_symbol_pipe | $SED -e '\''/^[BCDGRS][ ]/s/.*[ ]\([^ ]*\)/\1 DATA/'\'' | $SED -e '\''/^[AITW][ ]/s/.*[ ]//'\'' | sort | uniq > $export_symbols'
+
+ if $LD --help 2>&1 | $GREP 'auto-import' > /dev/null; then
+ archive_cmds='$CC -shared $libobjs $deplibs $compiler_flags -o $output_objdir/$soname ${wl}--enable-auto-image-base -Xlinker --out-implib -Xlinker $lib'
+ # If the export-symbols file already is a .def file (1st line
+ # is EXPORTS), use it as is; otherwise, prepend...
+ archive_expsym_cmds='if test "x`$SED 1q $export_symbols`" = xEXPORTS; then
+ cp $export_symbols $output_objdir/$soname.def;
+ else
+ echo EXPORTS > $output_objdir/$soname.def;
+ cat $export_symbols >> $output_objdir/$soname.def;
+ fi~
+ $CC -shared $output_objdir/$soname.def $libobjs $deplibs $compiler_flags -o $output_objdir/$soname ${wl}--enable-auto-image-base -Xlinker --out-implib -Xlinker $lib'
+ else
+ ld_shlibs=no
+ fi
+ ;;
+
+ interix[3-9]*)
+ hardcode_direct=no
+ hardcode_shlibpath_var=no
+ hardcode_libdir_flag_spec='${wl}-rpath,$libdir'
+ export_dynamic_flag_spec='${wl}-E'
+ # Hack: On Interix 3.x, we cannot compile PIC because of a broken gcc.
+ # Instead, shared libraries are loaded at an image base (0x10000000 by
+ # default) and relocated if they conflict, which is a slow very memory
+ # consuming and fragmenting process. To avoid this, we pick a random,
+ # 256 KiB-aligned image base between 0x50000000 and 0x6FFC0000 at link
+ # time. Moving up from 0x10000000 also allows more sbrk(2) space.
+ archive_cmds='$CC -shared $pic_flag $libobjs $deplibs $compiler_flags ${wl}-h,$soname ${wl}--image-base,`expr ${RANDOM-$$} % 4096 / 2 \* 262144 + 1342177280` -o $lib'
+ archive_expsym_cmds='sed "s,^,_," $export_symbols >$output_objdir/$soname.expsym~$CC -shared $pic_flag $libobjs $deplibs $compiler_flags ${wl}-h,$soname ${wl}--retain-symbols-file,$output_objdir/$soname.expsym ${wl}--image-base,`expr ${RANDOM-$$} % 4096 / 2 \* 262144 + 1342177280` -o $lib'
+ ;;
+
+ gnu* | linux* | tpf* | k*bsd*-gnu)
+ tmp_diet=no
+ if test "$host_os" = linux-dietlibc; then
+ case $cc_basename in
+ diet\ *) tmp_diet=yes;; # linux-dietlibc with static linking (!diet-dyn)
+ esac
+ fi
+ if $LD --help 2>&1 | $EGREP ': supported targets:.* elf' > /dev/null \
+ && test "$tmp_diet" = no
+ then
+ tmp_addflag=
+ tmp_sharedflag='-shared'
+ case $cc_basename,$host_cpu in
+ pgcc*) # Portland Group C compiler
+ whole_archive_flag_spec='${wl}--whole-archive`for conv in $convenience\"\"; do test -n \"$conv\" && new_convenience=\"$new_convenience,$conv\"; done; $ECHO \"$new_convenience\"` ${wl}--no-whole-archive'
+ tmp_addflag=' $pic_flag'
+ ;;
+ pgf77* | pgf90* | pgf95*) # Portland Group f77 and f90 compilers
+ whole_archive_flag_spec='${wl}--whole-archive`for conv in $convenience\"\"; do test -n \"$conv\" && new_convenience=\"$new_convenience,$conv\"; done; $ECHO \"$new_convenience\"` ${wl}--no-whole-archive'
+ tmp_addflag=' $pic_flag -Mnomain' ;;
+ ecc*,ia64* | icc*,ia64*) # Intel C compiler on ia64
+ tmp_addflag=' -i_dynamic' ;;
+ efc*,ia64* | ifort*,ia64*) # Intel Fortran compiler on ia64
+ tmp_addflag=' -i_dynamic -nofor_main' ;;
+ ifc* | ifort*) # Intel Fortran compiler
+ tmp_addflag=' -nofor_main' ;;
+ lf95*) # Lahey Fortran 8.1
+ whole_archive_flag_spec=
+ tmp_sharedflag='--shared' ;;
+ xl[cC]*) # IBM XL C 8.0 on PPC (deal with xlf below)
+ tmp_sharedflag='-qmkshrobj'
+ tmp_addflag= ;;
+ esac
+ case `$CC -V 2>&1 | sed 5q` in
+ *Sun\ C*) # Sun C 5.9
+ whole_archive_flag_spec='${wl}--whole-archive`new_convenience=; for conv in $convenience\"\"; do test -z \"$conv\" || new_convenience=\"$new_convenience,$conv\"; done; $ECHO \"$new_convenience\"` ${wl}--no-whole-archive'
+ compiler_needs_object=yes
+ tmp_sharedflag='-G' ;;
+ *Sun\ F*) # Sun Fortran 8.3
+ tmp_sharedflag='-G' ;;
+ esac
+ archive_cmds='$CC '"$tmp_sharedflag""$tmp_addflag"' $libobjs $deplibs $compiler_flags ${wl}-soname $wl$soname -o $lib'
+
+ if test "x$supports_anon_versioning" = xyes; then
+ archive_expsym_cmds='echo "{ global:" > $output_objdir/$libname.ver~
+ cat $export_symbols | sed -e "s/\(.*\)/\1;/" >> $output_objdir/$libname.ver~
+ echo "local: *; };" >> $output_objdir/$libname.ver~
+ $CC '"$tmp_sharedflag""$tmp_addflag"' $libobjs $deplibs $compiler_flags ${wl}-soname $wl$soname ${wl}-version-script ${wl}$output_objdir/$libname.ver -o $lib'
+ fi
+
+ case $cc_basename in
+ xlf*)
+ # IBM XL Fortran 10.1 on PPC cannot create shared libs itself
+ whole_archive_flag_spec='--whole-archive$convenience --no-whole-archive'
+ hardcode_libdir_flag_spec=
+ hardcode_libdir_flag_spec_ld='-rpath $libdir'
+ archive_cmds='$LD -shared $libobjs $deplibs $compiler_flags -soname $soname -o $lib'
+ if test "x$supports_anon_versioning" = xyes; then
+ archive_expsym_cmds='echo "{ global:" > $output_objdir/$libname.ver~
+ cat $export_symbols | sed -e "s/\(.*\)/\1;/" >> $output_objdir/$libname.ver~
+ echo "local: *; };" >> $output_objdir/$libname.ver~
+ $LD -shared $libobjs $deplibs $compiler_flags -soname $soname -version-script $output_objdir/$libname.ver -o $lib'
+ fi
+ ;;
+ esac
+ else
+ ld_shlibs=no
+ fi
+ ;;
+
+ netbsd*)
+ if echo __ELF__ | $CC -E - | $GREP __ELF__ >/dev/null; then
+ archive_cmds='$LD -Bshareable $libobjs $deplibs $linker_flags -o $lib'
+ wlarc=
+ else
+ archive_cmds='$CC -shared $libobjs $deplibs $compiler_flags ${wl}-soname $wl$soname -o $lib'
+ archive_expsym_cmds='$CC -shared $libobjs $deplibs $compiler_flags ${wl}-soname $wl$soname ${wl}-retain-symbols-file $wl$export_symbols -o $lib'
+ fi
+ ;;
+
+ solaris*)
+ if $LD -v 2>&1 | $GREP 'BFD 2\.8' > /dev/null; then
+ ld_shlibs=no
+ cat <<_LT_EOF 1>&2
+
+*** Warning: The releases 2.8.* of the GNU linker cannot reliably
+*** create shared libraries on Solaris systems. Therefore, libtool
+*** is disabling shared libraries support. We urge you to upgrade GNU
+*** binutils to release 2.9.1 or newer. Another option is to modify
+*** your PATH or compiler configuration so that the native linker is
+*** used, and then restart.
+
+_LT_EOF
+ elif $LD --help 2>&1 | $GREP ': supported targets:.* elf' > /dev/null; then
+ archive_cmds='$CC -shared $libobjs $deplibs $compiler_flags ${wl}-soname $wl$soname -o $lib'
+ archive_expsym_cmds='$CC -shared $libobjs $deplibs $compiler_flags ${wl}-soname $wl$soname ${wl}-retain-symbols-file $wl$export_symbols -o $lib'
+ else
+ ld_shlibs=no
+ fi
+ ;;
+
+ sysv5* | sco3.2v5* | sco5v6* | unixware* | OpenUNIX*)
+ case `$LD -v 2>&1` in
+ *\ [01].* | *\ 2.[0-9].* | *\ 2.1[0-5].*)
+ ld_shlibs=no
+ cat <<_LT_EOF 1>&2
+
+*** Warning: Releases of the GNU linker prior to 2.16.91.0.3 can not
+*** reliably create shared libraries on SCO systems. Therefore, libtool
+*** is disabling shared libraries support. We urge you to upgrade GNU
+*** binutils to release 2.16.91.0.3 or newer. Another option is to modify
+*** your PATH or compiler configuration so that the native linker is
+*** used, and then restart.
+
+_LT_EOF
+ ;;
+ *)
+ # For security reasons, it is highly recommended that you always
+ # use absolute paths for naming shared libraries, and exclude the
+ # DT_RUNPATH tag from executables and libraries. But doing so
+ # requires that you compile everything twice, which is a pain.
+ if $LD --help 2>&1 | $GREP ': supported targets:.* elf' > /dev/null; then
+ hardcode_libdir_flag_spec='${wl}-rpath ${wl}$libdir'
+ archive_cmds='$CC -shared $libobjs $deplibs $compiler_flags ${wl}-soname $wl$soname -o $lib'
+ archive_expsym_cmds='$CC -shared $libobjs $deplibs $compiler_flags ${wl}-soname $wl$soname ${wl}-retain-symbols-file $wl$export_symbols -o $lib'
+ else
+ ld_shlibs=no
+ fi
+ ;;
+ esac
+ ;;
+
+ sunos4*)
+ archive_cmds='$LD -assert pure-text -Bshareable -o $lib $libobjs $deplibs $linker_flags'
+ wlarc=
+ hardcode_direct=yes
+ hardcode_shlibpath_var=no
+ ;;
+
+ *)
+ if $LD --help 2>&1 | $GREP ': supported targets:.* elf' > /dev/null; then
+ archive_cmds='$CC -shared $libobjs $deplibs $compiler_flags ${wl}-soname $wl$soname -o $lib'
+ archive_expsym_cmds='$CC -shared $libobjs $deplibs $compiler_flags ${wl}-soname $wl$soname ${wl}-retain-symbols-file $wl$export_symbols -o $lib'
+ else
+ ld_shlibs=no
+ fi
+ ;;
+ esac
+
+ if test "$ld_shlibs" = no; then
+ runpath_var=
+ hardcode_libdir_flag_spec=
+ export_dynamic_flag_spec=
+ whole_archive_flag_spec=
+ fi
+ else
+ # PORTME fill in a description of your system's linker (not GNU ld)
+ case $host_os in
+ aix3*)
+ allow_undefined_flag=unsupported
+ always_export_symbols=yes
+ archive_expsym_cmds='$LD -o $output_objdir/$soname $libobjs $deplibs $linker_flags -bE:$export_symbols -T512 -H512 -bM:SRE~$AR $AR_FLAGS $lib $output_objdir/$soname'
+ # Note: this linker hardcodes the directories in LIBPATH if there
+ # are no directories specified by -L.
+ hardcode_minus_L=yes
+ if test "$GCC" = yes && test -z "$lt_prog_compiler_static"; then
+ # Neither direct hardcoding nor static linking is supported with a
+ # broken collect2.
+ hardcode_direct=unsupported
+ fi
+ ;;
+
+ aix[4-9]*)
+ if test "$host_cpu" = ia64; then
+ # On IA64, the linker does run time linking by default, so we don't
+ # have to do anything special.
+ aix_use_runtimelinking=no
+ exp_sym_flag='-Bexport'
+ no_entry_flag=""
+ else
+ # If we're using GNU nm, then we don't want the "-C" option.
+ # -C means demangle to AIX nm, but means don't demangle with GNU nm
+ if $NM -V 2>&1 | $GREP 'GNU' > /dev/null; then
+ export_symbols_cmds='$NM -Bpg $libobjs $convenience | awk '\''{ if (((\$ 2 == "T") || (\$ 2 == "D") || (\$ 2 == "B")) && (substr(\$ 3,1,1) != ".")) { print \$ 3 } }'\'' | sort -u > $export_symbols'
+ else
+ export_symbols_cmds='$NM -BCpg $libobjs $convenience | awk '\''{ if (((\$ 2 == "T") || (\$ 2 == "D") || (\$ 2 == "B")) && (substr(\$ 3,1,1) != ".")) { print \$ 3 } }'\'' | sort -u > $export_symbols'
+ fi
+ aix_use_runtimelinking=no
+
+ # Test if we are trying to use run time linking or normal
+ # AIX style linking. If -brtl is somewhere in LDFLAGS, we
+ # need to do runtime linking.
+ case $host_os in aix4.[23]|aix4.[23].*|aix[5-9]*)
+ for ld_flag in $LDFLAGS; do
+ if (test $ld_flag = "-brtl" || test $ld_flag = "-Wl,-brtl"); then
+ aix_use_runtimelinking=yes
+ break
+ fi
+ done
+ ;;
+ esac
+
+ exp_sym_flag='-bexport'
+ no_entry_flag='-bnoentry'
+ fi
+
+ # When large executables or shared objects are built, AIX ld can
+ # have problems creating the table of contents. If linking a library
+ # or program results in "error TOC overflow" add -mminimal-toc to
+ # CXXFLAGS/CFLAGS for g++/gcc. In the cases where that is not
+ # enough to fix the problem, add -Wl,-bbigtoc to LDFLAGS.
+
+ archive_cmds=''
+ hardcode_direct=yes
+ hardcode_direct_absolute=yes
+ hardcode_libdir_separator=':'
+ link_all_deplibs=yes
+ file_list_spec='${wl}-f,'
+
+ if test "$GCC" = yes; then
+ case $host_os in aix4.[012]|aix4.[012].*)
+ # We only want to do this on AIX 4.2 and lower, the check
+ # below for broken collect2 doesn't work under 4.3+
+ collect2name=`${CC} -print-prog-name=collect2`
+ if test -f "$collect2name" &&
+ strings "$collect2name" | $GREP resolve_lib_name >/dev/null
+ then
+ # We have reworked collect2
+ :
+ else
+ # We have old collect2
+ hardcode_direct=unsupported
+ # It fails to find uninstalled libraries when the uninstalled
+ # path is not listed in the libpath. Setting hardcode_minus_L
+ # to unsupported forces relinking
+ hardcode_minus_L=yes
+ hardcode_libdir_flag_spec='-L$libdir'
+ hardcode_libdir_separator=
+ fi
+ ;;
+ esac
+ shared_flag='-shared'
+ if test "$aix_use_runtimelinking" = yes; then
+ shared_flag="$shared_flag "'${wl}-G'
+ fi
+ else
+ # not using gcc
+ if test "$host_cpu" = ia64; then
+ # VisualAge C++, Version 5.5 for AIX 5L for IA-64, Beta 3 Release
+ # chokes on -Wl,-G. The following line is correct:
+ shared_flag='-G'
+ else
+ if test "$aix_use_runtimelinking" = yes; then
+ shared_flag='${wl}-G'
+ else
+ shared_flag='${wl}-bM:SRE'
+ fi
+ fi
+ fi
+
+ export_dynamic_flag_spec='${wl}-bexpall'
+ # It seems that -bexpall does not export symbols beginning with
+ # underscore (_), so it is better to generate a list of symbols to export.
+ always_export_symbols=yes
+ if test "$aix_use_runtimelinking" = yes; then
+ # Warning - without using the other runtime loading flags (-brtl),
+ # -berok will link without error, but may produce a broken library.
+ allow_undefined_flag='-berok'
+ # Determine the default libpath from the value encoded in an
+ # empty executable.
+ cat confdefs.h - <<_ACEOF >conftest.$ac_ext
+/* end confdefs.h. */
+
+int
+main ()
+{
+
+ ;
+ return 0;
+}
+_ACEOF
+if ac_fn_c_try_link "$LINENO"; then :
+
+lt_aix_libpath_sed='
+ /Import File Strings/,/^$/ {
+ /^0/ {
+ s/^0 *\(.*\)$/\1/
+ p
+ }
+ }'
+aix_libpath=`dump -H conftest$ac_exeext 2>/dev/null | $SED -n -e "$lt_aix_libpath_sed"`
+# Check for a 64-bit object if we didn't find anything.
+if test -z "$aix_libpath"; then
+ aix_libpath=`dump -HX64 conftest$ac_exeext 2>/dev/null | $SED -n -e "$lt_aix_libpath_sed"`
+fi
+fi
+rm -f core conftest.err conftest.$ac_objext \
+ conftest$ac_exeext conftest.$ac_ext
+if test -z "$aix_libpath"; then aix_libpath="/usr/lib:/lib"; fi
+
+ hardcode_libdir_flag_spec='${wl}-blibpath:$libdir:'"$aix_libpath"
+ archive_expsym_cmds='$CC -o $output_objdir/$soname $libobjs $deplibs '"\${wl}$no_entry_flag"' $compiler_flags `if test "x${allow_undefined_flag}" != "x"; then $ECHO "X${wl}${allow_undefined_flag}" | $Xsed; else :; fi` '"\${wl}$exp_sym_flag:\$export_symbols $shared_flag"
+ else
+ if test "$host_cpu" = ia64; then
+ hardcode_libdir_flag_spec='${wl}-R $libdir:/usr/lib:/lib'
+ allow_undefined_flag="-z nodefs"
+ archive_expsym_cmds="\$CC $shared_flag"' -o $output_objdir/$soname $libobjs $deplibs '"\${wl}$no_entry_flag"' $compiler_flags ${wl}${allow_undefined_flag} '"\${wl}$exp_sym_flag:\$export_symbols"
+ else
+ # Determine the default libpath from the value encoded in an
+ # empty executable.
+ cat confdefs.h - <<_ACEOF >conftest.$ac_ext
+/* end confdefs.h. */
+
+int
+main ()
+{
+
+ ;
+ return 0;
+}
+_ACEOF
+if ac_fn_c_try_link "$LINENO"; then :
+
+lt_aix_libpath_sed='
+ /Import File Strings/,/^$/ {
+ /^0/ {
+ s/^0 *\(.*\)$/\1/
+ p
+ }
+ }'
+aix_libpath=`dump -H conftest$ac_exeext 2>/dev/null | $SED -n -e "$lt_aix_libpath_sed"`
+# Check for a 64-bit object if we didn't find anything.
+if test -z "$aix_libpath"; then
+ aix_libpath=`dump -HX64 conftest$ac_exeext 2>/dev/null | $SED -n -e "$lt_aix_libpath_sed"`
+fi
+fi
+rm -f core conftest.err conftest.$ac_objext \
+ conftest$ac_exeext conftest.$ac_ext
+if test -z "$aix_libpath"; then aix_libpath="/usr/lib:/lib"; fi
+
+ hardcode_libdir_flag_spec='${wl}-blibpath:$libdir:'"$aix_libpath"
+ # Warning - without using the other run time loading flags,
+ # -berok will link without error, but may produce a broken library.
+ no_undefined_flag=' ${wl}-bernotok'
+ allow_undefined_flag=' ${wl}-berok'
+ # Exported symbols can be pulled into shared objects from archives
+ whole_archive_flag_spec='$convenience'
+ archive_cmds_need_lc=yes
+ # This is similar to how AIX traditionally builds its shared libraries.
+ archive_expsym_cmds="\$CC $shared_flag"' -o $output_objdir/$soname $libobjs $deplibs ${wl}-bnoentry $compiler_flags ${wl}-bE:$export_symbols${allow_undefined_flag}~$AR $AR_FLAGS $output_objdir/$libname$release.a $output_objdir/$soname'
+ fi
+ fi
+ ;;
+
+ amigaos*)
+ case $host_cpu in
+ powerpc)
+ # see comment about AmigaOS4 .so support
+ archive_cmds='$CC -shared $libobjs $deplibs $compiler_flags ${wl}-soname $wl$soname -o $lib'
+ archive_expsym_cmds=''
+ ;;
+ m68k)
+ archive_cmds='$RM $output_objdir/a2ixlibrary.data~$ECHO "#define NAME $libname" > $output_objdir/a2ixlibrary.data~$ECHO "#define LIBRARY_ID 1" >> $output_objdir/a2ixlibrary.data~$ECHO "#define VERSION $major" >> $output_objdir/a2ixlibrary.data~$ECHO "#define REVISION $revision" >> $output_objdir/a2ixlibrary.data~$AR $AR_FLAGS $lib $libobjs~$RANLIB $lib~(cd $output_objdir && a2ixlibrary -32)'
+ hardcode_libdir_flag_spec='-L$libdir'
+ hardcode_minus_L=yes
+ ;;
+ esac
+ ;;
+
+ bsdi[45]*)
+ export_dynamic_flag_spec=-rdynamic
+ ;;
+
+ cygwin* | mingw* | pw32* | cegcc*)
+ # When not using gcc, we currently assume that we are using
+ # Microsoft Visual C++.
+ # hardcode_libdir_flag_spec is actually meaningless, as there is
+ # no search path for DLLs.
+ hardcode_libdir_flag_spec=' '
+ allow_undefined_flag=unsupported
+ # Tell ltmain to make .lib files, not .a files.
+ libext=lib
+ # Tell ltmain to make .dll files, not .so files.
+ shrext_cmds=".dll"
+ # FIXME: Setting linknames here is a bad hack.
+ archive_cmds='$CC -o $lib $libobjs $compiler_flags `$ECHO "X$deplibs" | $Xsed -e '\''s/ -lc$//'\''` -link -dll~linknames='
+ # The linker will automatically build a .lib file if we build a DLL.
+ old_archive_from_new_cmds='true'
+ # FIXME: Should let the user specify the lib program.
+ old_archive_cmds='lib -OUT:$oldlib$oldobjs$old_deplibs'
+ fix_srcfile_path='`cygpath -w "$srcfile"`'
+ enable_shared_with_static_runtimes=yes
+ ;;
+
+ darwin* | rhapsody*)
+
+
+ archive_cmds_need_lc=no
+ hardcode_direct=no
+ hardcode_automatic=yes
+ hardcode_shlibpath_var=unsupported
+ whole_archive_flag_spec=''
+ link_all_deplibs=yes
+ allow_undefined_flag="$_lt_dar_allow_undefined"
+ case $cc_basename in
+ ifort*) _lt_dar_can_shared=yes ;;
+ *) _lt_dar_can_shared=$GCC ;;
+ esac
+ if test "$_lt_dar_can_shared" = "yes"; then
+ output_verbose_link_cmd=echo
+ archive_cmds="\$CC -dynamiclib \$allow_undefined_flag -o \$lib \$libobjs \$deplibs \$compiler_flags -install_name \$rpath/\$soname \$verstring $_lt_dar_single_mod${_lt_dsymutil}"
+ module_cmds="\$CC \$allow_undefined_flag -o \$lib -bundle \$libobjs \$deplibs \$compiler_flags${_lt_dsymutil}"
+ archive_expsym_cmds="sed 's,^,_,' < \$export_symbols > \$output_objdir/\${libname}-symbols.expsym~\$CC -dynamiclib \$allow_undefined_flag -o \$lib \$libobjs \$deplibs \$compiler_flags -install_name \$rpath/\$soname \$verstring ${_lt_dar_single_mod}${_lt_dar_export_syms}${_lt_dsymutil}"
+ module_expsym_cmds="sed -e 's,^,_,' < \$export_symbols > \$output_objdir/\${libname}-symbols.expsym~\$CC \$allow_undefined_flag -o \$lib -bundle \$libobjs \$deplibs \$compiler_flags${_lt_dar_export_syms}${_lt_dsymutil}"
+
+ else
+ ld_shlibs=no
+ fi
+
+ ;;
+
+ dgux*)
+ archive_cmds='$LD -G -h $soname -o $lib $libobjs $deplibs $linker_flags'
+ hardcode_libdir_flag_spec='-L$libdir'
+ hardcode_shlibpath_var=no
+ ;;
+
+ freebsd1*)
+ ld_shlibs=no
+ ;;
+
+ # FreeBSD 2.2.[012] allows us to include c++rt0.o to get C++ constructor
+ # support. Future versions do this automatically, but an explicit c++rt0.o
+ # does not break anything, and helps significantly (at the cost of a little
+ # extra space).
+ freebsd2.2*)
+ archive_cmds='$LD -Bshareable -o $lib $libobjs $deplibs $linker_flags /usr/lib/c++rt0.o'
+ hardcode_libdir_flag_spec='-R$libdir'
+ hardcode_direct=yes
+ hardcode_shlibpath_var=no
+ ;;
+
+ # Unfortunately, older versions of FreeBSD 2 do not have this feature.
+ freebsd2*)
+ archive_cmds='$LD -Bshareable -o $lib $libobjs $deplibs $linker_flags'
+ hardcode_direct=yes
+ hardcode_minus_L=yes
+ hardcode_shlibpath_var=no
+ ;;
+
+ # FreeBSD 3 and greater uses gcc -shared to do shared libraries.
+ freebsd* | dragonfly*)
+ archive_cmds='$CC -shared -o $lib $libobjs $deplibs $compiler_flags'
+ hardcode_libdir_flag_spec='-R$libdir'
+ hardcode_direct=yes
+ hardcode_shlibpath_var=no
+ ;;
+
+ hpux9*)
+ if test "$GCC" = yes; then
+ archive_cmds='$RM $output_objdir/$soname~$CC -shared -fPIC ${wl}+b ${wl}$install_libdir -o $output_objdir/$soname $libobjs $deplibs $compiler_flags~test $output_objdir/$soname = $lib || mv $output_objdir/$soname $lib'
+ else
+ archive_cmds='$RM $output_objdir/$soname~$LD -b +b $install_libdir -o $output_objdir/$soname $libobjs $deplibs $linker_flags~test $output_objdir/$soname = $lib || mv $output_objdir/$soname $lib'
+ fi
+ hardcode_libdir_flag_spec='${wl}+b ${wl}$libdir'
+ hardcode_libdir_separator=:
+ hardcode_direct=yes
+
+ # hardcode_minus_L: Not really in the search PATH,
+ # but as the default location of the library.
+ hardcode_minus_L=yes
+ export_dynamic_flag_spec='${wl}-E'
+ ;;
+
+ hpux10*)
+ if test "$GCC" = yes -a "$with_gnu_ld" = no; then
+ archive_cmds='$CC -shared -fPIC ${wl}+h ${wl}$soname ${wl}+b ${wl}$install_libdir -o $lib $libobjs $deplibs $compiler_flags'
+ else
+ archive_cmds='$LD -b +h $soname +b $install_libdir -o $lib $libobjs $deplibs $linker_flags'
+ fi
+ if test "$with_gnu_ld" = no; then
+ hardcode_libdir_flag_spec='${wl}+b ${wl}$libdir'
+ hardcode_libdir_flag_spec_ld='+b $libdir'
+ hardcode_libdir_separator=:
+ hardcode_direct=yes
+ hardcode_direct_absolute=yes
+ export_dynamic_flag_spec='${wl}-E'
+ # hardcode_minus_L: Not really in the search PATH,
+ # but as the default location of the library.
+ hardcode_minus_L=yes
+ fi
+ ;;
+
+ hpux11*)
+ if test "$GCC" = yes -a "$with_gnu_ld" = no; then
+ case $host_cpu in
+ hppa*64*)
+ archive_cmds='$CC -shared ${wl}+h ${wl}$soname -o $lib $libobjs $deplibs $compiler_flags'
+ ;;
+ ia64*)
+ archive_cmds='$CC -shared -fPIC ${wl}+h ${wl}$soname ${wl}+nodefaultrpath -o $lib $libobjs $deplibs $compiler_flags'
+ ;;
+ *)
+ archive_cmds='$CC -shared -fPIC ${wl}+h ${wl}$soname ${wl}+b ${wl}$install_libdir -o $lib $libobjs $deplibs $compiler_flags'
+ ;;
+ esac
+ else
+ case $host_cpu in
+ hppa*64*)
+ archive_cmds='$CC -b ${wl}+h ${wl}$soname -o $lib $libobjs $deplibs $compiler_flags'
+ ;;
+ ia64*)
+ archive_cmds='$CC -b ${wl}+h ${wl}$soname ${wl}+nodefaultrpath -o $lib $libobjs $deplibs $compiler_flags'
+ ;;
+ *)
+ archive_cmds='$CC -b ${wl}+h ${wl}$soname ${wl}+b ${wl}$install_libdir -o $lib $libobjs $deplibs $compiler_flags'
+ ;;
+ esac
+ fi
+ if test "$with_gnu_ld" = no; then
+ hardcode_libdir_flag_spec='${wl}+b ${wl}$libdir'
+ hardcode_libdir_separator=:
+
+ case $host_cpu in
+ hppa*64*|ia64*)
+ hardcode_direct=no
+ hardcode_shlibpath_var=no
+ ;;
+ *)
+ hardcode_direct=yes
+ hardcode_direct_absolute=yes
+ export_dynamic_flag_spec='${wl}-E'
+
+ # hardcode_minus_L: Not really in the search PATH,
+ # but as the default location of the library.
+ hardcode_minus_L=yes
+ ;;
+ esac
+ fi
+ ;;
+
+ irix5* | irix6* | nonstopux*)
+ if test "$GCC" = yes; then
+ archive_cmds='$CC -shared $libobjs $deplibs $compiler_flags ${wl}-soname ${wl}$soname `test -n "$verstring" && $ECHO "X${wl}-set_version ${wl}$verstring" | $Xsed` ${wl}-update_registry ${wl}${output_objdir}/so_locations -o $lib'
+ # Try to use the -exported_symbol ld option, if it does not
+ # work, assume that -exports_file does not work either and
+ # implicitly export all symbols.
+ save_LDFLAGS="$LDFLAGS"
+ LDFLAGS="$LDFLAGS -shared ${wl}-exported_symbol ${wl}foo ${wl}-update_registry ${wl}/dev/null"
+ cat confdefs.h - <<_ACEOF >conftest.$ac_ext
+/* end confdefs.h. */
+int foo(void) {}
+_ACEOF
+if ac_fn_c_try_link "$LINENO"; then :
+ archive_expsym_cmds='$CC -shared $libobjs $deplibs $compiler_flags ${wl}-soname ${wl}$soname `test -n "$verstring" && $ECHO "X${wl}-set_version ${wl}$verstring" | $Xsed` ${wl}-update_registry ${wl}${output_objdir}/so_locations ${wl}-exports_file ${wl}$export_symbols -o $lib'
+
+fi
+rm -f core conftest.err conftest.$ac_objext \
+ conftest$ac_exeext conftest.$ac_ext
+ LDFLAGS="$save_LDFLAGS"
+ else
+ archive_cmds='$CC -shared $libobjs $deplibs $compiler_flags -soname $soname `test -n "$verstring" && $ECHO "X-set_version $verstring" | $Xsed` -update_registry ${output_objdir}/so_locations -o $lib'
+ archive_expsym_cmds='$CC -shared $libobjs $deplibs $compiler_flags -soname $soname `test -n "$verstring" && $ECHO "X-set_version $verstring" | $Xsed` -update_registry ${output_objdir}/so_locations -exports_file $export_symbols -o $lib'
+ fi
+ archive_cmds_need_lc='no'
+ hardcode_libdir_flag_spec='${wl}-rpath ${wl}$libdir'
+ hardcode_libdir_separator=:
+ inherit_rpath=yes
+ link_all_deplibs=yes
+ ;;
+
+ netbsd*)
+ if echo __ELF__ | $CC -E - | $GREP __ELF__ >/dev/null; then
+ archive_cmds='$LD -Bshareable -o $lib $libobjs $deplibs $linker_flags' # a.out
+ else
+ archive_cmds='$LD -shared -o $lib $libobjs $deplibs $linker_flags' # ELF
+ fi
+ hardcode_libdir_flag_spec='-R$libdir'
+ hardcode_direct=yes
+ hardcode_shlibpath_var=no
+ ;;
+
+ newsos6)
+ archive_cmds='$LD -G -h $soname -o $lib $libobjs $deplibs $linker_flags'
+ hardcode_direct=yes
+ hardcode_libdir_flag_spec='${wl}-rpath ${wl}$libdir'
+ hardcode_libdir_separator=:
+ hardcode_shlibpath_var=no
+ ;;
+
+ *nto* | *qnx*)
+ ;;
+
+ openbsd*)
+ if test -f /usr/libexec/ld.so; then
+ hardcode_direct=yes
+ hardcode_shlibpath_var=no
+ hardcode_direct_absolute=yes
+ if test -z "`echo __ELF__ | $CC -E - | $GREP __ELF__`" || test "$host_os-$host_cpu" = "openbsd2.8-powerpc"; then
+ archive_cmds='$CC -shared $pic_flag -o $lib $libobjs $deplibs $compiler_flags'
+ archive_expsym_cmds='$CC -shared $pic_flag -o $lib $libobjs $deplibs $compiler_flags ${wl}-retain-symbols-file,$export_symbols'
+ hardcode_libdir_flag_spec='${wl}-rpath,$libdir'
+ export_dynamic_flag_spec='${wl}-E'
+ else
+ case $host_os in
+ openbsd[01].* | openbsd2.[0-7] | openbsd2.[0-7].*)
+ archive_cmds='$LD -Bshareable -o $lib $libobjs $deplibs $linker_flags'
+ hardcode_libdir_flag_spec='-R$libdir'
+ ;;
+ *)
+ archive_cmds='$CC -shared $pic_flag -o $lib $libobjs $deplibs $compiler_flags'
+ hardcode_libdir_flag_spec='${wl}-rpath,$libdir'
+ ;;
+ esac
+ fi
+ else
+ ld_shlibs=no
+ fi
+ ;;
+
+ os2*)
+ hardcode_libdir_flag_spec='-L$libdir'
+ hardcode_minus_L=yes
+ allow_undefined_flag=unsupported
+ archive_cmds='$ECHO "LIBRARY $libname INITINSTANCE" > $output_objdir/$libname.def~$ECHO "DESCRIPTION \"$libname\"" >> $output_objdir/$libname.def~$ECHO DATA >> $output_objdir/$libname.def~$ECHO " SINGLE NONSHARED" >> $output_objdir/$libname.def~$ECHO EXPORTS >> $output_objdir/$libname.def~emxexp $libobjs >> $output_objdir/$libname.def~$CC -Zdll -Zcrtdll -o $lib $libobjs $deplibs $compiler_flags $output_objdir/$libname.def'
+ old_archive_from_new_cmds='emximp -o $output_objdir/$libname.a $output_objdir/$libname.def'
+ ;;
+
+ osf3*)
+ if test "$GCC" = yes; then
+ allow_undefined_flag=' ${wl}-expect_unresolved ${wl}\*'
+ archive_cmds='$CC -shared${allow_undefined_flag} $libobjs $deplibs $compiler_flags ${wl}-soname ${wl}$soname `test -n "$verstring" && $ECHO "X${wl}-set_version ${wl}$verstring" | $Xsed` ${wl}-update_registry ${wl}${output_objdir}/so_locations -o $lib'
+ else
+ allow_undefined_flag=' -expect_unresolved \*'
+ archive_cmds='$CC -shared${allow_undefined_flag} $libobjs $deplibs $compiler_flags -soname $soname `test -n "$verstring" && $ECHO "X-set_version $verstring" | $Xsed` -update_registry ${output_objdir}/so_locations -o $lib'
+ fi
+ archive_cmds_need_lc='no'
+ hardcode_libdir_flag_spec='${wl}-rpath ${wl}$libdir'
+ hardcode_libdir_separator=:
+ ;;
+
+ osf4* | osf5*) # as osf3* with the addition of -msym flag
+ if test "$GCC" = yes; then
+ allow_undefined_flag=' ${wl}-expect_unresolved ${wl}\*'
+ archive_cmds='$CC -shared${allow_undefined_flag} $libobjs $deplibs $compiler_flags ${wl}-msym ${wl}-soname ${wl}$soname `test -n "$verstring" && $ECHO "X${wl}-set_version ${wl}$verstring" | $Xsed` ${wl}-update_registry ${wl}${output_objdir}/so_locations -o $lib'
+ hardcode_libdir_flag_spec='${wl}-rpath ${wl}$libdir'
+ else
+ allow_undefined_flag=' -expect_unresolved \*'
+ archive_cmds='$CC -shared${allow_undefined_flag} $libobjs $deplibs $compiler_flags -msym -soname $soname `test -n "$verstring" && $ECHO "X-set_version $verstring" | $Xsed` -update_registry ${output_objdir}/so_locations -o $lib'
+ archive_expsym_cmds='for i in `cat $export_symbols`; do printf "%s %s\\n" -exported_symbol "\$i" >> $lib.exp; done; printf "%s\\n" "-hidden">> $lib.exp~
+ $CC -shared${allow_undefined_flag} ${wl}-input ${wl}$lib.exp $compiler_flags $libobjs $deplibs -soname $soname `test -n "$verstring" && $ECHO "X-set_version $verstring" | $Xsed` -update_registry ${output_objdir}/so_locations -o $lib~$RM $lib.exp'
+
+ # Both c and cxx compiler support -rpath directly
+ hardcode_libdir_flag_spec='-rpath $libdir'
+ fi
+ archive_cmds_need_lc='no'
+ hardcode_libdir_separator=:
+ ;;
+
+ solaris*)
+ no_undefined_flag=' -z defs'
+ if test "$GCC" = yes; then
+ wlarc='${wl}'
+ archive_cmds='$CC -shared ${wl}-z ${wl}text ${wl}-h ${wl}$soname -o $lib $libobjs $deplibs $compiler_flags'
+ archive_expsym_cmds='echo "{ global:" > $lib.exp~cat $export_symbols | $SED -e "s/\(.*\)/\1;/" >> $lib.exp~echo "local: *; };" >> $lib.exp~
+ $CC -shared ${wl}-z ${wl}text ${wl}-M ${wl}$lib.exp ${wl}-h ${wl}$soname -o $lib $libobjs $deplibs $compiler_flags~$RM $lib.exp'
+ else
+ case `$CC -V 2>&1` in
+ *"Compilers 5.0"*)
+ wlarc=''
+ archive_cmds='$LD -G${allow_undefined_flag} -h $soname -o $lib $libobjs $deplibs $linker_flags'
+ archive_expsym_cmds='echo "{ global:" > $lib.exp~cat $export_symbols | $SED -e "s/\(.*\)/\1;/" >> $lib.exp~echo "local: *; };" >> $lib.exp~
+ $LD -G${allow_undefined_flag} -M $lib.exp -h $soname -o $lib $libobjs $deplibs $linker_flags~$RM $lib.exp'
+ ;;
+ *)
+ wlarc='${wl}'
+ archive_cmds='$CC -G${allow_undefined_flag} -h $soname -o $lib $libobjs $deplibs $compiler_flags'
+ archive_expsym_cmds='echo "{ global:" > $lib.exp~cat $export_symbols | $SED -e "s/\(.*\)/\1;/" >> $lib.exp~echo "local: *; };" >> $lib.exp~
+ $CC -G${allow_undefined_flag} -M $lib.exp -h $soname -o $lib $libobjs $deplibs $compiler_flags~$RM $lib.exp'
+ ;;
+ esac
+ fi
+ hardcode_libdir_flag_spec='-R$libdir'
+ hardcode_shlibpath_var=no
+ case $host_os in
+ solaris2.[0-5] | solaris2.[0-5].*) ;;
+ *)
+ # The compiler driver will combine and reorder linker options,
+ # but understands `-z linker_flag'. GCC discards it without `$wl',
+ # but is careful enough not to reorder.
+ # Supported since Solaris 2.6 (maybe 2.5.1?)
+ if test "$GCC" = yes; then
+ whole_archive_flag_spec='${wl}-z ${wl}allextract$convenience ${wl}-z ${wl}defaultextract'
+ else
+ whole_archive_flag_spec='-z allextract$convenience -z defaultextract'
+ fi
+ ;;
+ esac
+ link_all_deplibs=yes
+ ;;
+
+ sunos4*)
+ if test "x$host_vendor" = xsequent; then
+ # Use $CC to link under sequent, because it throws in some extra .o
+ # files that make .init and .fini sections work.
+ archive_cmds='$CC -G ${wl}-h $soname -o $lib $libobjs $deplibs $compiler_flags'
+ else
+ archive_cmds='$LD -assert pure-text -Bstatic -o $lib $libobjs $deplibs $linker_flags'
+ fi
+ hardcode_libdir_flag_spec='-L$libdir'
+ hardcode_direct=yes
+ hardcode_minus_L=yes
+ hardcode_shlibpath_var=no
+ ;;
+
+ sysv4)
+ case $host_vendor in
+ sni)
+ archive_cmds='$LD -G -h $soname -o $lib $libobjs $deplibs $linker_flags'
+ hardcode_direct=yes # is this really true???
+ ;;
+ siemens)
+ ## LD is ld it makes a PLAMLIB
+ ## CC just makes a GrossModule.
+ archive_cmds='$LD -G -o $lib $libobjs $deplibs $linker_flags'
+ reload_cmds='$CC -r -o $output$reload_objs'
+ hardcode_direct=no
+ ;;
+ motorola)
+ archive_cmds='$LD -G -h $soname -o $lib $libobjs $deplibs $linker_flags'
+ hardcode_direct=no #Motorola manual says yes, but my tests say they lie
+ ;;
+ esac
+ runpath_var='LD_RUN_PATH'
+ hardcode_shlibpath_var=no
+ ;;
+
+ sysv4.3*)
+ archive_cmds='$LD -G -h $soname -o $lib $libobjs $deplibs $linker_flags'
+ hardcode_shlibpath_var=no
+ export_dynamic_flag_spec='-Bexport'
+ ;;
+
+ sysv4*MP*)
+ if test -d /usr/nec; then
+ archive_cmds='$LD -G -h $soname -o $lib $libobjs $deplibs $linker_flags'
+ hardcode_shlibpath_var=no
+ runpath_var=LD_RUN_PATH
+ hardcode_runpath_var=yes
+ ld_shlibs=yes
+ fi
+ ;;
+
+ sysv4*uw2* | sysv5OpenUNIX* | sysv5UnixWare7.[01].[10]* | unixware7* | sco3.2v5.0.[024]*)
+ no_undefined_flag='${wl}-z,text'
+ archive_cmds_need_lc=no
+ hardcode_shlibpath_var=no
+ runpath_var='LD_RUN_PATH'
+
+ if test "$GCC" = yes; then
+ archive_cmds='$CC -shared ${wl}-h,$soname -o $lib $libobjs $deplibs $compiler_flags'
+ archive_expsym_cmds='$CC -shared ${wl}-Bexport:$export_symbols ${wl}-h,$soname -o $lib $libobjs $deplibs $compiler_flags'
+ else
+ archive_cmds='$CC -G ${wl}-h,$soname -o $lib $libobjs $deplibs $compiler_flags'
+ archive_expsym_cmds='$CC -G ${wl}-Bexport:$export_symbols ${wl}-h,$soname -o $lib $libobjs $deplibs $compiler_flags'
+ fi
+ ;;
+
+ sysv5* | sco3.2v5* | sco5v6*)
+ # Note: We can NOT use -z defs as we might desire, because we do not
+ # link with -lc, and that would cause any symbols used from libc to
+ # always be unresolved, which means just about no library would
+ # ever link correctly. If we're not using GNU ld we use -z text
+ # though, which does catch some bad symbols but isn't as heavy-handed
+ # as -z defs.
+ no_undefined_flag='${wl}-z,text'
+ allow_undefined_flag='${wl}-z,nodefs'
+ archive_cmds_need_lc=no
+ hardcode_shlibpath_var=no
+ hardcode_libdir_flag_spec='${wl}-R,$libdir'
+ hardcode_libdir_separator=':'
+ link_all_deplibs=yes
+ export_dynamic_flag_spec='${wl}-Bexport'
+ runpath_var='LD_RUN_PATH'
+
+ if test "$GCC" = yes; then
+ archive_cmds='$CC -shared ${wl}-h,$soname -o $lib $libobjs $deplibs $compiler_flags'
+ archive_expsym_cmds='$CC -shared ${wl}-Bexport:$export_symbols ${wl}-h,$soname -o $lib $libobjs $deplibs $compiler_flags'
+ else
+ archive_cmds='$CC -G ${wl}-h,$soname -o $lib $libobjs $deplibs $compiler_flags'
+ archive_expsym_cmds='$CC -G ${wl}-Bexport:$export_symbols ${wl}-h,$soname -o $lib $libobjs $deplibs $compiler_flags'
+ fi
+ ;;
+
+ uts4*)
+ archive_cmds='$LD -G -h $soname -o $lib $libobjs $deplibs $linker_flags'
+ hardcode_libdir_flag_spec='-L$libdir'
+ hardcode_shlibpath_var=no
+ ;;
+
+ *)
+ ld_shlibs=no
+ ;;
+ esac
+
+ if test x$host_vendor = xsni; then
+ case $host in
+ sysv4 | sysv4.2uw2* | sysv4.3* | sysv5*)
+ export_dynamic_flag_spec='${wl}-Blargedynsym'
+ ;;
+ esac
+ fi
+ fi
+
+{ $as_echo "$as_me:${as_lineno-$LINENO}: result: $ld_shlibs" >&5
+$as_echo "$ld_shlibs" >&6; }
+test "$ld_shlibs" = no && can_build_shared=no
+
+with_gnu_ld=$with_gnu_ld
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+#
+# Do we need to explicitly link libc?
+#
+case "x$archive_cmds_need_lc" in
+x|xyes)
+ # Assume -lc should be added
+ archive_cmds_need_lc=yes
+
+ if test "$enable_shared" = yes && test "$GCC" = yes; then
+ case $archive_cmds in
+ *'~'*)
+ # FIXME: we may have to deal with multi-command sequences.
+ ;;
+ '$CC '*)
+ # Test whether the compiler implicitly links with -lc since on some
+ # systems, -lgcc has to come before -lc. If gcc already passes -lc
+ # to ld, don't add -lc before -lgcc.
+ { $as_echo "$as_me:${as_lineno-$LINENO}: checking whether -lc should be explicitly linked in" >&5
+$as_echo_n "checking whether -lc should be explicitly linked in... " >&6; }
+ $RM conftest*
+ echo "$lt_simple_compile_test_code" > conftest.$ac_ext
+
+ if { { eval echo "\"\$as_me\":${as_lineno-$LINENO}: \"$ac_compile\""; } >&5
+ (eval $ac_compile) 2>&5
+ ac_status=$?
+ $as_echo "$as_me:${as_lineno-$LINENO}: \$? = $ac_status" >&5
+ test $ac_status = 0; } 2>conftest.err; then
+ soname=conftest
+ lib=conftest
+ libobjs=conftest.$ac_objext
+ deplibs=
+ wl=$lt_prog_compiler_wl
+ pic_flag=$lt_prog_compiler_pic
+ compiler_flags=-v
+ linker_flags=-v
+ verstring=
+ output_objdir=.
+ libname=conftest
+ lt_save_allow_undefined_flag=$allow_undefined_flag
+ allow_undefined_flag=
+ if { { eval echo "\"\$as_me\":${as_lineno-$LINENO}: \"$archive_cmds 2\>\&1 \| $GREP \" -lc \" \>/dev/null 2\>\&1\""; } >&5
+ (eval $archive_cmds 2\>\&1 \| $GREP \" -lc \" \>/dev/null 2\>\&1) 2>&5
+ ac_status=$?
+ $as_echo "$as_me:${as_lineno-$LINENO}: \$? = $ac_status" >&5
+ test $ac_status = 0; }
+ then
+ archive_cmds_need_lc=no
+ else
+ archive_cmds_need_lc=yes
+ fi
+ allow_undefined_flag=$lt_save_allow_undefined_flag
+ else
+ cat conftest.err 1>&5
+ fi
+ $RM conftest*
+ { $as_echo "$as_me:${as_lineno-$LINENO}: result: $archive_cmds_need_lc" >&5
+$as_echo "$archive_cmds_need_lc" >&6; }
+ ;;
+ esac
+ fi
+ ;;
+esac
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+ { $as_echo "$as_me:${as_lineno-$LINENO}: checking dynamic linker characteristics" >&5
+$as_echo_n "checking dynamic linker characteristics... " >&6; }
+
+if test "$GCC" = yes; then
+ case $host_os in
+ darwin*) lt_awk_arg="/^libraries:/,/LR/" ;;
+ *) lt_awk_arg="/^libraries:/" ;;
+ esac
+ lt_search_path_spec=`$CC -print-search-dirs | awk $lt_awk_arg | $SED -e "s/^libraries://" -e "s,=/,/,g"`
+ if $ECHO "$lt_search_path_spec" | $GREP ';' >/dev/null ; then
+ # if the path contains ";" then we assume it to be the separator
+ # otherwise default to the standard path separator (i.e. ":") - it is
+ # assumed that no part of a normal pathname contains ";" but that should
+ # okay in the real world where ";" in dirpaths is itself problematic.
+ lt_search_path_spec=`$ECHO "$lt_search_path_spec" | $SED -e 's/;/ /g'`
+ else
+ lt_search_path_spec=`$ECHO "$lt_search_path_spec" | $SED -e "s/$PATH_SEPARATOR/ /g"`
+ fi
+ # Ok, now we have the path, separated by spaces, we can step through it
+ # and add multilib dir if necessary.
+ lt_tmp_lt_search_path_spec=
+ lt_multi_os_dir=`$CC $CPPFLAGS $CFLAGS $LDFLAGS -print-multi-os-directory 2>/dev/null`
+ for lt_sys_path in $lt_search_path_spec; do
+ if test -d "$lt_sys_path/$lt_multi_os_dir"; then
+ lt_tmp_lt_search_path_spec="$lt_tmp_lt_search_path_spec $lt_sys_path/$lt_multi_os_dir"
+ else
+ test -d "$lt_sys_path" && \
+ lt_tmp_lt_search_path_spec="$lt_tmp_lt_search_path_spec $lt_sys_path"
+ fi
+ done
+ lt_search_path_spec=`$ECHO $lt_tmp_lt_search_path_spec | awk '
+BEGIN {RS=" "; FS="/|\n";} {
+ lt_foo="";
+ lt_count=0;
+ for (lt_i = NF; lt_i > 0; lt_i--) {
+ if ($lt_i != "" && $lt_i != ".") {
+ if ($lt_i == "..") {
+ lt_count++;
+ } else {
+ if (lt_count == 0) {
+ lt_foo="/" $lt_i lt_foo;
+ } else {
+ lt_count--;
+ }
+ }
+ }
+ }
+ if (lt_foo != "") { lt_freq[lt_foo]++; }
+ if (lt_freq[lt_foo] == 1) { print lt_foo; }
+}'`
+ sys_lib_search_path_spec=`$ECHO $lt_search_path_spec`
+else
+ sys_lib_search_path_spec="/lib /usr/lib /usr/local/lib"
+fi
+library_names_spec=
+libname_spec='lib$name'
+soname_spec=
+shrext_cmds=".so"
+postinstall_cmds=
+postuninstall_cmds=
+finish_cmds=
+finish_eval=
+shlibpath_var=
+shlibpath_overrides_runpath=unknown
+version_type=none
+dynamic_linker="$host_os ld.so"
+sys_lib_dlsearch_path_spec="/lib /usr/lib"
+need_lib_prefix=unknown
+hardcode_into_libs=no
+
+# when you set need_version to no, make sure it does not cause -set_version
+# flags to be left without arguments
+need_version=unknown
+
+case $host_os in
+aix3*)
+ version_type=linux
+ library_names_spec='${libname}${release}${shared_ext}$versuffix $libname.a'
+ shlibpath_var=LIBPATH
+
+ # AIX 3 has no versioning support, so we append a major version to the name.
+ soname_spec='${libname}${release}${shared_ext}$major'
+ ;;
+
+aix[4-9]*)
+ version_type=linux
+ need_lib_prefix=no
+ need_version=no
+ hardcode_into_libs=yes
+ if test "$host_cpu" = ia64; then
+ # AIX 5 supports IA64
+ library_names_spec='${libname}${release}${shared_ext}$major ${libname}${release}${shared_ext}$versuffix $libname${shared_ext}'
+ shlibpath_var=LD_LIBRARY_PATH
+ else
+ # With GCC up to 2.95.x, collect2 would create an import file
+ # for dependence libraries. The import file would start with
+ # the line `#! .'. This would cause the generated library to
+ # depend on `.', always an invalid library. This was fixed in
+ # development snapshots of GCC prior to 3.0.
+ case $host_os in
+ aix4 | aix4.[01] | aix4.[01].*)
+ if { echo '#if __GNUC__ > 2 || (__GNUC__ == 2 && __GNUC_MINOR__ >= 97)'
+ echo ' yes '
+ echo '#endif'; } | ${CC} -E - | $GREP yes > /dev/null; then
+ :
+ else
+ can_build_shared=no
+ fi
+ ;;
+ esac
+ # AIX (on Power*) has no versioning support, so currently we can not hardcode correct
+ # soname into executable. Probably we can add versioning support to
+ # collect2, so additional links can be useful in future.
+ if test "$aix_use_runtimelinking" = yes; then
+ # If using run time linking (on AIX 4.2 or later) use lib<name>.so
+ # instead of lib<name>.a to let people know that these are not
+ # typical AIX shared libraries.
+ library_names_spec='${libname}${release}${shared_ext}$versuffix ${libname}${release}${shared_ext}$major $libname${shared_ext}'
+ else
+ # We preserve .a as extension for shared libraries through AIX4.2
+ # and later when we are not doing run time linking.
+ library_names_spec='${libname}${release}.a $libname.a'
+ soname_spec='${libname}${release}${shared_ext}$major'
+ fi
+ shlibpath_var=LIBPATH
+ fi
+ ;;
+
+amigaos*)
+ case $host_cpu in
+ powerpc)
+ # Since July 2007 AmigaOS4 officially supports .so libraries.
+ # When compiling the executable, add -use-dynld -Lsobjs: to the compileline.
+ library_names_spec='${libname}${release}${shared_ext}$versuffix ${libname}${release}${shared_ext}$major $libname${shared_ext}'
+ ;;
+ m68k)
+ library_names_spec='$libname.ixlibrary $libname.a'
+ # Create ${libname}_ixlibrary.a entries in /sys/libs.
+ finish_eval='for lib in `ls $libdir/*.ixlibrary 2>/dev/null`; do libname=`$ECHO "X$lib" | $Xsed -e '\''s%^.*/\([^/]*\)\.ixlibrary$%\1%'\''`; test $RM /sys/libs/${libname}_ixlibrary.a; $show "cd /sys/libs && $LN_S $lib ${libname}_ixlibrary.a"; cd /sys/libs && $LN_S $lib ${libname}_ixlibrary.a || exit 1; done'
+ ;;
+ esac
+ ;;
+
+beos*)
+ library_names_spec='${libname}${shared_ext}'
+ dynamic_linker="$host_os ld.so"
+ shlibpath_var=LIBRARY_PATH
+ ;;
+
+bsdi[45]*)
+ version_type=linux
+ need_version=no
+ library_names_spec='${libname}${release}${shared_ext}$versuffix ${libname}${release}${shared_ext}$major $libname${shared_ext}'
+ soname_spec='${libname}${release}${shared_ext}$major'
+ finish_cmds='PATH="\$PATH:/sbin" ldconfig $libdir'
+ shlibpath_var=LD_LIBRARY_PATH
+ sys_lib_search_path_spec="/shlib /usr/lib /usr/X11/lib /usr/contrib/lib /lib /usr/local/lib"
+ sys_lib_dlsearch_path_spec="/shlib /usr/lib /usr/local/lib"
+ # the default ld.so.conf also contains /usr/contrib/lib and
+ # /usr/X11R6/lib (/usr/X11 is a link to /usr/X11R6), but let us allow
+ # libtool to hard-code these into programs
+ ;;
+
+cygwin* | mingw* | pw32* | cegcc*)
+ version_type=windows
+ shrext_cmds=".dll"
+ need_version=no
+ need_lib_prefix=no
+
+ case $GCC,$host_os in
+ yes,cygwin* | yes,mingw* | yes,pw32* | yes,cegcc*)
+ library_names_spec='$libname.dll.a'
+ # DLL is installed to $(libdir)/../bin by postinstall_cmds
+ postinstall_cmds='base_file=`basename \${file}`~
+ dlpath=`$SHELL 2>&1 -c '\''. $dir/'\''\${base_file}'\''i; echo \$dlname'\''`~
+ dldir=$destdir/`dirname \$dlpath`~
+ test -d \$dldir || mkdir -p \$dldir~
+ $install_prog $dir/$dlname \$dldir/$dlname~
+ chmod a+x \$dldir/$dlname~
+ if test -n '\''$stripme'\'' && test -n '\''$striplib'\''; then
+ eval '\''$striplib \$dldir/$dlname'\'' || exit \$?;
+ fi'
+ postuninstall_cmds='dldll=`$SHELL 2>&1 -c '\''. $file; echo \$dlname'\''`~
+ dlpath=$dir/\$dldll~
+ $RM \$dlpath'
+ shlibpath_overrides_runpath=yes
+
+ case $host_os in
+ cygwin*)
+ # Cygwin DLLs use 'cyg' prefix rather than 'lib'
+ soname_spec='`echo ${libname} | sed -e 's/^lib/cyg/'``echo ${release} | $SED -e 's/[.]/-/g'`${versuffix}${shared_ext}'
+ sys_lib_search_path_spec="/usr/lib /lib/w32api /lib /usr/local/lib"
+ ;;
+ mingw* | cegcc*)
+ # MinGW DLLs use traditional 'lib' prefix
+ soname_spec='${libname}`echo ${release} | $SED -e 's/[.]/-/g'`${versuffix}${shared_ext}'
+ sys_lib_search_path_spec=`$CC -print-search-dirs | $GREP "^libraries:" | $SED -e "s/^libraries://" -e "s,=/,/,g"`
+ if $ECHO "$sys_lib_search_path_spec" | $GREP ';[c-zC-Z]:/' >/dev/null; then
+ # It is most probably a Windows format PATH printed by
+ # mingw gcc, but we are running on Cygwin. Gcc prints its search
+ # path with ; separators, and with drive letters. We can handle the
+ # drive letters (cygwin fileutils understands them), so leave them,
+ # especially as we might pass files found there to a mingw objdump,
+ # which wouldn't understand a cygwinified path. Ahh.
+ sys_lib_search_path_spec=`$ECHO "$sys_lib_search_path_spec" | $SED -e 's/;/ /g'`
+ else
+ sys_lib_search_path_spec=`$ECHO "$sys_lib_search_path_spec" | $SED -e "s/$PATH_SEPARATOR/ /g"`
+ fi
+ ;;
+ pw32*)
+ # pw32 DLLs use 'pw' prefix rather than 'lib'
+ library_names_spec='`echo ${libname} | sed -e 's/^lib/pw/'``echo ${release} | $SED -e 's/[.]/-/g'`${versuffix}${shared_ext}'
+ ;;
+ esac
+ ;;
+
+ *)
+ library_names_spec='${libname}`echo ${release} | $SED -e 's/[.]/-/g'`${versuffix}${shared_ext} $libname.lib'
+ ;;
+ esac
+ dynamic_linker='Win32 ld.exe'
+ # FIXME: first we should search . and the directory the executable is in
+ shlibpath_var=PATH
+ ;;
+
+darwin* | rhapsody*)
+ dynamic_linker="$host_os dyld"
+ version_type=darwin
+ need_lib_prefix=no
+ need_version=no
+ library_names_spec='${libname}${release}${major}$shared_ext ${libname}$shared_ext'
+ soname_spec='${libname}${release}${major}$shared_ext'
+ shlibpath_overrides_runpath=yes
+ shlibpath_var=DYLD_LIBRARY_PATH
+ shrext_cmds='`test .$module = .yes && echo .so || echo .dylib`'
+
+ sys_lib_search_path_spec="$sys_lib_search_path_spec /usr/local/lib"
+ sys_lib_dlsearch_path_spec='/usr/local/lib /lib /usr/lib'
+ ;;
+
+dgux*)
+ version_type=linux
+ need_lib_prefix=no
+ need_version=no
+ library_names_spec='${libname}${release}${shared_ext}$versuffix ${libname}${release}${shared_ext}$major $libname$shared_ext'
+ soname_spec='${libname}${release}${shared_ext}$major'
+ shlibpath_var=LD_LIBRARY_PATH
+ ;;
+
+freebsd1*)
+ dynamic_linker=no
+ ;;
+
+freebsd* | dragonfly*)
+ # DragonFly does not have aout. When/if they implement a new
+ # versioning mechanism, adjust this.
+ if test -x /usr/bin/objformat; then
+ objformat=`/usr/bin/objformat`
+ else
+ case $host_os in
+ freebsd[123]*) objformat=aout ;;
+ *) objformat=elf ;;
+ esac
+ fi
+ version_type=freebsd-$objformat
+ case $version_type in
+ freebsd-elf*)
+ library_names_spec='${libname}${release}${shared_ext}$versuffix ${libname}${release}${shared_ext} $libname${shared_ext}'
+ need_version=no
+ need_lib_prefix=no
+ ;;
+ freebsd-*)
+ library_names_spec='${libname}${release}${shared_ext}$versuffix $libname${shared_ext}$versuffix'
+ need_version=yes
+ ;;
+ esac
+ shlibpath_var=LD_LIBRARY_PATH
+ case $host_os in
+ freebsd2*)
+ shlibpath_overrides_runpath=yes
+ ;;
+ freebsd3.[01]* | freebsdelf3.[01]*)
+ shlibpath_overrides_runpath=yes
+ hardcode_into_libs=yes
+ ;;
+ freebsd3.[2-9]* | freebsdelf3.[2-9]* | \
+ freebsd4.[0-5] | freebsdelf4.[0-5] | freebsd4.1.1 | freebsdelf4.1.1)
+ shlibpath_overrides_runpath=no
+ hardcode_into_libs=yes
+ ;;
+ *) # from 4.6 on, and DragonFly
+ shlibpath_overrides_runpath=yes
+ hardcode_into_libs=yes
+ ;;
+ esac
+ ;;
+
+gnu*)
+ version_type=linux
+ need_lib_prefix=no
+ need_version=no
+ library_names_spec='${libname}${release}${shared_ext}$versuffix ${libname}${release}${shared_ext}${major} ${libname}${shared_ext}'
+ soname_spec='${libname}${release}${shared_ext}$major'
+ shlibpath_var=LD_LIBRARY_PATH
+ hardcode_into_libs=yes
+ ;;
+
+hpux9* | hpux10* | hpux11*)
+ # Give a soname corresponding to the major version so that dld.sl refuses to
+ # link against other versions.
+ version_type=sunos
+ need_lib_prefix=no
+ need_version=no
+ case $host_cpu in
+ ia64*)
+ shrext_cmds='.so'
+ hardcode_into_libs=yes
+ dynamic_linker="$host_os dld.so"
+ shlibpath_var=LD_LIBRARY_PATH
+ shlibpath_overrides_runpath=yes # Unless +noenvvar is specified.
+ library_names_spec='${libname}${release}${shared_ext}$versuffix ${libname}${release}${shared_ext}$major $libname${shared_ext}'
+ soname_spec='${libname}${release}${shared_ext}$major'
+ if test "X$HPUX_IA64_MODE" = X32; then
+ sys_lib_search_path_spec="/usr/lib/hpux32 /usr/local/lib/hpux32 /usr/local/lib"
+ else
+ sys_lib_search_path_spec="/usr/lib/hpux64 /usr/local/lib/hpux64"
+ fi
+ sys_lib_dlsearch_path_spec=$sys_lib_search_path_spec
+ ;;
+ hppa*64*)
+ shrext_cmds='.sl'
+ hardcode_into_libs=yes
+ dynamic_linker="$host_os dld.sl"
+ shlibpath_var=LD_LIBRARY_PATH # How should we handle SHLIB_PATH
+ shlibpath_overrides_runpath=yes # Unless +noenvvar is specified.
+ library_names_spec='${libname}${release}${shared_ext}$versuffix ${libname}${release}${shared_ext}$major $libname${shared_ext}'
+ soname_spec='${libname}${release}${shared_ext}$major'
+ sys_lib_search_path_spec="/usr/lib/pa20_64 /usr/ccs/lib/pa20_64"
+ sys_lib_dlsearch_path_spec=$sys_lib_search_path_spec
+ ;;
+ *)
+ shrext_cmds='.sl'
+ dynamic_linker="$host_os dld.sl"
+ shlibpath_var=SHLIB_PATH
+ shlibpath_overrides_runpath=no # +s is required to enable SHLIB_PATH
+ library_names_spec='${libname}${release}${shared_ext}$versuffix ${libname}${release}${shared_ext}$major $libname${shared_ext}'
+ soname_spec='${libname}${release}${shared_ext}$major'
+ ;;
+ esac
+ # HP-UX runs *really* slowly unless shared libraries are mode 555.
+ postinstall_cmds='chmod 555 $lib'
+ ;;
+
+interix[3-9]*)
+ version_type=linux
+ need_lib_prefix=no
+ need_version=no
+ library_names_spec='${libname}${release}${shared_ext}$versuffix ${libname}${release}${shared_ext}$major ${libname}${shared_ext}'
+ soname_spec='${libname}${release}${shared_ext}$major'
+ dynamic_linker='Interix 3.x ld.so.1 (PE, like ELF)'
+ shlibpath_var=LD_LIBRARY_PATH
+ shlibpath_overrides_runpath=no
+ hardcode_into_libs=yes
+ ;;
+
+irix5* | irix6* | nonstopux*)
+ case $host_os in
+ nonstopux*) version_type=nonstopux ;;
+ *)
+ if test "$lt_cv_prog_gnu_ld" = yes; then
+ version_type=linux
+ else
+ version_type=irix
+ fi ;;
+ esac
+ need_lib_prefix=no
+ need_version=no
+ soname_spec='${libname}${release}${shared_ext}$major'
+ library_names_spec='${libname}${release}${shared_ext}$versuffix ${libname}${release}${shared_ext}$major ${libname}${release}${shared_ext} $libname${shared_ext}'
+ case $host_os in
+ irix5* | nonstopux*)
+ libsuff= shlibsuff=
+ ;;
+ *)
+ case $LD in # libtool.m4 will add one of these switches to LD
+ *-32|*"-32 "|*-melf32bsmip|*"-melf32bsmip ")
+ libsuff= shlibsuff= libmagic=32-bit;;
+ *-n32|*"-n32 "|*-melf32bmipn32|*"-melf32bmipn32 ")
+ libsuff=32 shlibsuff=N32 libmagic=N32;;
+ *-64|*"-64 "|*-melf64bmip|*"-melf64bmip ")
+ libsuff=64 shlibsuff=64 libmagic=64-bit;;
+ *) libsuff= shlibsuff= libmagic=never-match;;
+ esac
+ ;;
+ esac
+ shlibpath_var=LD_LIBRARY${shlibsuff}_PATH
+ shlibpath_overrides_runpath=no
+ sys_lib_search_path_spec="/usr/lib${libsuff} /lib${libsuff} /usr/local/lib${libsuff}"
+ sys_lib_dlsearch_path_spec="/usr/lib${libsuff} /lib${libsuff}"
+ hardcode_into_libs=yes
+ ;;
+
+# No shared lib support for Linux oldld, aout, or coff.
+linux*oldld* | linux*aout* | linux*coff*)
+ dynamic_linker=no
+ ;;
+
+# This must be Linux ELF.
+linux* | k*bsd*-gnu)
+ version_type=linux
+ need_lib_prefix=no
+ need_version=no
+ library_names_spec='${libname}${release}${shared_ext}$versuffix ${libname}${release}${shared_ext}$major $libname${shared_ext}'
+ soname_spec='${libname}${release}${shared_ext}$major'
+ finish_cmds='PATH="\$PATH:/sbin" ldconfig -n $libdir'
+ shlibpath_var=LD_LIBRARY_PATH
+ shlibpath_overrides_runpath=no
+ # Some binutils ld are patched to set DT_RUNPATH
+ save_LDFLAGS=$LDFLAGS
+ save_libdir=$libdir
+ eval "libdir=/foo; wl=\"$lt_prog_compiler_wl\"; \
+ LDFLAGS=\"\$LDFLAGS $hardcode_libdir_flag_spec\""
+ cat confdefs.h - <<_ACEOF >conftest.$ac_ext
+/* end confdefs.h. */
+
+int
+main ()
+{
+
+ ;
+ return 0;
+}
+_ACEOF
+if ac_fn_c_try_link "$LINENO"; then :
+ if ($OBJDUMP -p conftest$ac_exeext) 2>/dev/null | grep "RUNPATH.*$libdir" >/dev/null; then :
+ shlibpath_overrides_runpath=yes
+fi
+fi
+rm -f core conftest.err conftest.$ac_objext \
+ conftest$ac_exeext conftest.$ac_ext
+ LDFLAGS=$save_LDFLAGS
+ libdir=$save_libdir
+
+ # This implies no fast_install, which is unacceptable.
+ # Some rework will be needed to allow for fast_install
+ # before this can be enabled.
+ hardcode_into_libs=yes
+
+ # Append ld.so.conf contents to the search path
+ if test -f /etc/ld.so.conf; then
+ lt_ld_extra=`awk '/^include / { system(sprintf("cd /etc; cat %s 2>/dev/null", \$2)); skip = 1; } { if (!skip) print \$0; skip = 0; }' < /etc/ld.so.conf | $SED -e 's/#.*//;/^[ ]*hwcap[ ]/d;s/[:, ]/ /g;s/=[^=]*$//;s/=[^= ]* / /g;/^$/d' | tr '\n' ' '`
+ sys_lib_dlsearch_path_spec="/lib /usr/lib $lt_ld_extra"
+ fi
+
+ # We used to test for /lib/ld.so.1 and disable shared libraries on
+ # powerpc, because MkLinux only supported shared libraries with the
+ # GNU dynamic linker. Since this was broken with cross compilers,
+ # most powerpc-linux boxes support dynamic linking these days and
+ # people can always --disable-shared, the test was removed, and we
+ # assume the GNU/Linux dynamic linker is in use.
+ dynamic_linker='GNU/Linux ld.so'
+ ;;
+
+netbsd*)
+ version_type=sunos
+ need_lib_prefix=no
+ need_version=no
+ if echo __ELF__ | $CC -E - | $GREP __ELF__ >/dev/null; then
+ library_names_spec='${libname}${release}${shared_ext}$versuffix ${libname}${shared_ext}$versuffix'
+ finish_cmds='PATH="\$PATH:/sbin" ldconfig -m $libdir'
+ dynamic_linker='NetBSD (a.out) ld.so'
+ else
+ library_names_spec='${libname}${release}${shared_ext}$versuffix ${libname}${release}${shared_ext}$major ${libname}${shared_ext}'
+ soname_spec='${libname}${release}${shared_ext}$major'
+ dynamic_linker='NetBSD ld.elf_so'
+ fi
+ shlibpath_var=LD_LIBRARY_PATH
+ shlibpath_overrides_runpath=yes
+ hardcode_into_libs=yes
+ ;;
+
+newsos6)
+ version_type=linux
+ library_names_spec='${libname}${release}${shared_ext}$versuffix ${libname}${release}${shared_ext}$major $libname${shared_ext}'
+ shlibpath_var=LD_LIBRARY_PATH
+ shlibpath_overrides_runpath=yes
+ ;;
+
+*nto* | *qnx*)
+ version_type=qnx
+ need_lib_prefix=no
+ need_version=no
+ library_names_spec='${libname}${release}${shared_ext}$versuffix ${libname}${release}${shared_ext}$major $libname${shared_ext}'
+ soname_spec='${libname}${release}${shared_ext}$major'
+ shlibpath_var=LD_LIBRARY_PATH
+ shlibpath_overrides_runpath=no
+ hardcode_into_libs=yes
+ dynamic_linker='ldqnx.so'
+ ;;
+
+openbsd*)
+ version_type=sunos
+ sys_lib_dlsearch_path_spec="/usr/lib"
+ need_lib_prefix=no
+ # Some older versions of OpenBSD (3.3 at least) *do* need versioned libs.
+ case $host_os in
+ openbsd3.3 | openbsd3.3.*) need_version=yes ;;
+ *) need_version=no ;;
+ esac
+ library_names_spec='${libname}${release}${shared_ext}$versuffix ${libname}${shared_ext}$versuffix'
+ finish_cmds='PATH="\$PATH:/sbin" ldconfig -m $libdir'
+ shlibpath_var=LD_LIBRARY_PATH
+ if test -z "`echo __ELF__ | $CC -E - | $GREP __ELF__`" || test "$host_os-$host_cpu" = "openbsd2.8-powerpc"; then
+ case $host_os in
+ openbsd2.[89] | openbsd2.[89].*)
+ shlibpath_overrides_runpath=no
+ ;;
+ *)
+ shlibpath_overrides_runpath=yes
+ ;;
+ esac
+ else
+ shlibpath_overrides_runpath=yes
+ fi
+ ;;
+
+os2*)
+ libname_spec='$name'
+ shrext_cmds=".dll"
+ need_lib_prefix=no
+ library_names_spec='$libname${shared_ext} $libname.a'
+ dynamic_linker='OS/2 ld.exe'
+ shlibpath_var=LIBPATH
+ ;;
+
+osf3* | osf4* | osf5*)
+ version_type=osf
+ need_lib_prefix=no
+ need_version=no
+ soname_spec='${libname}${release}${shared_ext}$major'
+ library_names_spec='${libname}${release}${shared_ext}$versuffix ${libname}${release}${shared_ext}$major $libname${shared_ext}'
+ shlibpath_var=LD_LIBRARY_PATH
+ sys_lib_search_path_spec="/usr/shlib /usr/ccs/lib /usr/lib/cmplrs/cc /usr/lib /usr/local/lib /var/shlib"
+ sys_lib_dlsearch_path_spec="$sys_lib_search_path_spec"
+ ;;
+
+rdos*)
+ dynamic_linker=no
+ ;;
+
+solaris*)
+ version_type=linux
+ need_lib_prefix=no
+ need_version=no
+ library_names_spec='${libname}${release}${shared_ext}$versuffix ${libname}${release}${shared_ext}$major $libname${shared_ext}'
+ soname_spec='${libname}${release}${shared_ext}$major'
+ shlibpath_var=LD_LIBRARY_PATH
+ shlibpath_overrides_runpath=yes
+ hardcode_into_libs=yes
+ # ldd complains unless libraries are executable
+ postinstall_cmds='chmod +x $lib'
+ ;;
+
+sunos4*)
+ version_type=sunos
+ library_names_spec='${libname}${release}${shared_ext}$versuffix ${libname}${shared_ext}$versuffix'
+ finish_cmds='PATH="\$PATH:/usr/etc" ldconfig $libdir'
+ shlibpath_var=LD_LIBRARY_PATH
+ shlibpath_overrides_runpath=yes
+ if test "$with_gnu_ld" = yes; then
+ need_lib_prefix=no
+ fi
+ need_version=yes
+ ;;
+
+sysv4 | sysv4.3*)
+ version_type=linux
+ library_names_spec='${libname}${release}${shared_ext}$versuffix ${libname}${release}${shared_ext}$major $libname${shared_ext}'
+ soname_spec='${libname}${release}${shared_ext}$major'
+ shlibpath_var=LD_LIBRARY_PATH
+ case $host_vendor in
+ sni)
+ shlibpath_overrides_runpath=no
+ need_lib_prefix=no
+ runpath_var=LD_RUN_PATH
+ ;;
+ siemens)
+ need_lib_prefix=no
+ ;;
+ motorola)
+ need_lib_prefix=no
+ need_version=no
+ shlibpath_overrides_runpath=no
+ sys_lib_search_path_spec='/lib /usr/lib /usr/ccs/lib'
+ ;;
+ esac
+ ;;
+
+sysv4*MP*)
+ if test -d /usr/nec ;then
+ version_type=linux
+ library_names_spec='$libname${shared_ext}.$versuffix $libname${shared_ext}.$major $libname${shared_ext}'
+ soname_spec='$libname${shared_ext}.$major'
+ shlibpath_var=LD_LIBRARY_PATH
+ fi
+ ;;
+
+sysv5* | sco3.2v5* | sco5v6* | unixware* | OpenUNIX* | sysv4*uw2*)
+ version_type=freebsd-elf
+ need_lib_prefix=no
+ need_version=no
+ library_names_spec='${libname}${release}${shared_ext}$versuffix ${libname}${release}${shared_ext} $libname${shared_ext}'
+ soname_spec='${libname}${release}${shared_ext}$major'
+ shlibpath_var=LD_LIBRARY_PATH
+ shlibpath_overrides_runpath=yes
+ hardcode_into_libs=yes
+ if test "$with_gnu_ld" = yes; then
+ sys_lib_search_path_spec='/usr/local/lib /usr/gnu/lib /usr/ccs/lib /usr/lib /lib'
+ else
+ sys_lib_search_path_spec='/usr/ccs/lib /usr/lib'
+ case $host_os in
+ sco3.2v5*)
+ sys_lib_search_path_spec="$sys_lib_search_path_spec /lib"
+ ;;
+ esac
+ fi
+ sys_lib_dlsearch_path_spec='/usr/lib'
+ ;;
+
+tpf*)
+ # TPF is a cross-target only. Preferred cross-host = GNU/Linux.
+ version_type=linux
+ need_lib_prefix=no
+ need_version=no
+ library_names_spec='${libname}${release}${shared_ext}$versuffix ${libname}${release}${shared_ext}$major $libname${shared_ext}'
+ shlibpath_var=LD_LIBRARY_PATH
+ shlibpath_overrides_runpath=no
+ hardcode_into_libs=yes
+ ;;
+
+uts4*)
+ version_type=linux
+ library_names_spec='${libname}${release}${shared_ext}$versuffix ${libname}${release}${shared_ext}$major $libname${shared_ext}'
+ soname_spec='${libname}${release}${shared_ext}$major'
+ shlibpath_var=LD_LIBRARY_PATH
+ ;;
+
+*)
+ dynamic_linker=no
+ ;;
+esac
+{ $as_echo "$as_me:${as_lineno-$LINENO}: result: $dynamic_linker" >&5
+$as_echo "$dynamic_linker" >&6; }
+test "$dynamic_linker" = no && can_build_shared=no
+
+variables_saved_for_relink="PATH $shlibpath_var $runpath_var"
+if test "$GCC" = yes; then
+ variables_saved_for_relink="$variables_saved_for_relink GCC_EXEC_PREFIX COMPILER_PATH LIBRARY_PATH"
+fi
+
+if test "${lt_cv_sys_lib_search_path_spec+set}" = set; then
+ sys_lib_search_path_spec="$lt_cv_sys_lib_search_path_spec"
+fi
+if test "${lt_cv_sys_lib_dlsearch_path_spec+set}" = set; then
+ sys_lib_dlsearch_path_spec="$lt_cv_sys_lib_dlsearch_path_spec"
+fi
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+ { $as_echo "$as_me:${as_lineno-$LINENO}: checking how to hardcode library paths into programs" >&5
+$as_echo_n "checking how to hardcode library paths into programs... " >&6; }
+hardcode_action=
+if test -n "$hardcode_libdir_flag_spec" ||
+ test -n "$runpath_var" ||
+ test "X$hardcode_automatic" = "Xyes" ; then
+
+ # We can hardcode non-existent directories.
+ if test "$hardcode_direct" != no &&
+ # If the only mechanism to avoid hardcoding is shlibpath_var, we
+ # have to relink, otherwise we might link with an installed library
+ # when we should be linking with a yet-to-be-installed one
+ ## test "$_LT_TAGVAR(hardcode_shlibpath_var, )" != no &&
+ test "$hardcode_minus_L" != no; then
+ # Linking always hardcodes the temporary library directory.
+ hardcode_action=relink
+ else
+ # We can link without hardcoding, and we can hardcode nonexisting dirs.
+ hardcode_action=immediate
+ fi
+else
+ # We cannot hardcode anything, or else we can only hardcode existing
+ # directories.
+ hardcode_action=unsupported
+fi
+{ $as_echo "$as_me:${as_lineno-$LINENO}: result: $hardcode_action" >&5
+$as_echo "$hardcode_action" >&6; }
+
+if test "$hardcode_action" = relink ||
+ test "$inherit_rpath" = yes; then
+ # Fast installation is not supported
+ enable_fast_install=no
+elif test "$shlibpath_overrides_runpath" = yes ||
+ test "$enable_shared" = no; then
+ # Fast installation is not necessary
+ enable_fast_install=needless
+fi
+
+
+
+
+
+
+ if test "x$enable_dlopen" != xyes; then
+ enable_dlopen=unknown
+ enable_dlopen_self=unknown
+ enable_dlopen_self_static=unknown
+else
+ lt_cv_dlopen=no
+ lt_cv_dlopen_libs=
+
+ case $host_os in
+ beos*)
+ lt_cv_dlopen="load_add_on"
+ lt_cv_dlopen_libs=
+ lt_cv_dlopen_self=yes
+ ;;
+
+ mingw* | pw32* | cegcc*)
+ lt_cv_dlopen="LoadLibrary"
+ lt_cv_dlopen_libs=
+ ;;
+
+ cygwin*)
+ lt_cv_dlopen="dlopen"
+ lt_cv_dlopen_libs=
+ ;;
+
+ darwin*)
+ # if libdl is installed we need to link against it
+ { $as_echo "$as_me:${as_lineno-$LINENO}: checking for dlopen in -ldl" >&5
+$as_echo_n "checking for dlopen in -ldl... " >&6; }
+if test "${ac_cv_lib_dl_dlopen+set}" = set; then :
+ $as_echo_n "(cached) " >&6
+else
+ ac_check_lib_save_LIBS=$LIBS
+LIBS="-ldl $LIBS"
+cat confdefs.h - <<_ACEOF >conftest.$ac_ext
+/* end confdefs.h. */
+
+/* Override any GCC internal prototype to avoid an error.
+ Use char because int might match the return type of a GCC
+ builtin and then its argument prototype would still apply. */
+#ifdef __cplusplus
+extern "C"
+#endif
+char dlopen ();
+int
+main ()
+{
+return dlopen ();
+ ;
+ return 0;
+}
+_ACEOF
+if ac_fn_c_try_link "$LINENO"; then :
+ ac_cv_lib_dl_dlopen=yes
+else
+ ac_cv_lib_dl_dlopen=no
+fi
+rm -f core conftest.err conftest.$ac_objext \
+ conftest$ac_exeext conftest.$ac_ext
+LIBS=$ac_check_lib_save_LIBS
+fi
+{ $as_echo "$as_me:${as_lineno-$LINENO}: result: $ac_cv_lib_dl_dlopen" >&5
+$as_echo "$ac_cv_lib_dl_dlopen" >&6; }
+if test "x$ac_cv_lib_dl_dlopen" = x""yes; then :
+ lt_cv_dlopen="dlopen" lt_cv_dlopen_libs="-ldl"
+else
+
+ lt_cv_dlopen="dyld"
+ lt_cv_dlopen_libs=
+ lt_cv_dlopen_self=yes
+
+fi
+
+ ;;
+
+ *)
+ ac_fn_c_check_func "$LINENO" "shl_load" "ac_cv_func_shl_load"
+if test "x$ac_cv_func_shl_load" = x""yes; then :
+ lt_cv_dlopen="shl_load"
+else
+ { $as_echo "$as_me:${as_lineno-$LINENO}: checking for shl_load in -ldld" >&5
+$as_echo_n "checking for shl_load in -ldld... " >&6; }
+if test "${ac_cv_lib_dld_shl_load+set}" = set; then :
+ $as_echo_n "(cached) " >&6
+else
+ ac_check_lib_save_LIBS=$LIBS
+LIBS="-ldld $LIBS"
+cat confdefs.h - <<_ACEOF >conftest.$ac_ext
+/* end confdefs.h. */
+
+/* Override any GCC internal prototype to avoid an error.
+ Use char because int might match the return type of a GCC
+ builtin and then its argument prototype would still apply. */
+#ifdef __cplusplus
+extern "C"
+#endif
+char shl_load ();
+int
+main ()
+{
+return shl_load ();
+ ;
+ return 0;
+}
+_ACEOF
+if ac_fn_c_try_link "$LINENO"; then :
+ ac_cv_lib_dld_shl_load=yes
+else
+ ac_cv_lib_dld_shl_load=no
+fi
+rm -f core conftest.err conftest.$ac_objext \
+ conftest$ac_exeext conftest.$ac_ext
+LIBS=$ac_check_lib_save_LIBS
+fi
+{ $as_echo "$as_me:${as_lineno-$LINENO}: result: $ac_cv_lib_dld_shl_load" >&5
+$as_echo "$ac_cv_lib_dld_shl_load" >&6; }
+if test "x$ac_cv_lib_dld_shl_load" = x""yes; then :
+ lt_cv_dlopen="shl_load" lt_cv_dlopen_libs="-ldld"
+else
+ ac_fn_c_check_func "$LINENO" "dlopen" "ac_cv_func_dlopen"
+if test "x$ac_cv_func_dlopen" = x""yes; then :
+ lt_cv_dlopen="dlopen"
+else
+ { $as_echo "$as_me:${as_lineno-$LINENO}: checking for dlopen in -ldl" >&5
+$as_echo_n "checking for dlopen in -ldl... " >&6; }
+if test "${ac_cv_lib_dl_dlopen+set}" = set; then :
+ $as_echo_n "(cached) " >&6
+else
+ ac_check_lib_save_LIBS=$LIBS
+LIBS="-ldl $LIBS"
+cat confdefs.h - <<_ACEOF >conftest.$ac_ext
+/* end confdefs.h. */
+
+/* Override any GCC internal prototype to avoid an error.
+ Use char because int might match the return type of a GCC
+ builtin and then its argument prototype would still apply. */
+#ifdef __cplusplus
+extern "C"
+#endif
+char dlopen ();
+int
+main ()
+{
+return dlopen ();
+ ;
+ return 0;
+}
+_ACEOF
+if ac_fn_c_try_link "$LINENO"; then :
+ ac_cv_lib_dl_dlopen=yes
+else
+ ac_cv_lib_dl_dlopen=no
+fi
+rm -f core conftest.err conftest.$ac_objext \
+ conftest$ac_exeext conftest.$ac_ext
+LIBS=$ac_check_lib_save_LIBS
+fi
+{ $as_echo "$as_me:${as_lineno-$LINENO}: result: $ac_cv_lib_dl_dlopen" >&5
+$as_echo "$ac_cv_lib_dl_dlopen" >&6; }
+if test "x$ac_cv_lib_dl_dlopen" = x""yes; then :
+ lt_cv_dlopen="dlopen" lt_cv_dlopen_libs="-ldl"
+else
+ { $as_echo "$as_me:${as_lineno-$LINENO}: checking for dlopen in -lsvld" >&5
+$as_echo_n "checking for dlopen in -lsvld... " >&6; }
+if test "${ac_cv_lib_svld_dlopen+set}" = set; then :
+ $as_echo_n "(cached) " >&6
+else
+ ac_check_lib_save_LIBS=$LIBS
+LIBS="-lsvld $LIBS"
+cat confdefs.h - <<_ACEOF >conftest.$ac_ext
+/* end confdefs.h. */
+
+/* Override any GCC internal prototype to avoid an error.
+ Use char because int might match the return type of a GCC
+ builtin and then its argument prototype would still apply. */
+#ifdef __cplusplus
+extern "C"
+#endif
+char dlopen ();
+int
+main ()
+{
+return dlopen ();
+ ;
+ return 0;
+}
+_ACEOF
+if ac_fn_c_try_link "$LINENO"; then :
+ ac_cv_lib_svld_dlopen=yes
+else
+ ac_cv_lib_svld_dlopen=no
+fi
+rm -f core conftest.err conftest.$ac_objext \
+ conftest$ac_exeext conftest.$ac_ext
+LIBS=$ac_check_lib_save_LIBS
+fi
+{ $as_echo "$as_me:${as_lineno-$LINENO}: result: $ac_cv_lib_svld_dlopen" >&5
+$as_echo "$ac_cv_lib_svld_dlopen" >&6; }
+if test "x$ac_cv_lib_svld_dlopen" = x""yes; then :
+ lt_cv_dlopen="dlopen" lt_cv_dlopen_libs="-lsvld"
+else
+ { $as_echo "$as_me:${as_lineno-$LINENO}: checking for dld_link in -ldld" >&5
+$as_echo_n "checking for dld_link in -ldld... " >&6; }
+if test "${ac_cv_lib_dld_dld_link+set}" = set; then :
+ $as_echo_n "(cached) " >&6
+else
+ ac_check_lib_save_LIBS=$LIBS
+LIBS="-ldld $LIBS"
+cat confdefs.h - <<_ACEOF >conftest.$ac_ext
+/* end confdefs.h. */
+
+/* Override any GCC internal prototype to avoid an error.
+ Use char because int might match the return type of a GCC
+ builtin and then its argument prototype would still apply. */
+#ifdef __cplusplus
+extern "C"
+#endif
+char dld_link ();
+int
+main ()
+{
+return dld_link ();
+ ;
+ return 0;
+}
+_ACEOF
+if ac_fn_c_try_link "$LINENO"; then :
+ ac_cv_lib_dld_dld_link=yes
+else
+ ac_cv_lib_dld_dld_link=no
+fi
+rm -f core conftest.err conftest.$ac_objext \
+ conftest$ac_exeext conftest.$ac_ext
+LIBS=$ac_check_lib_save_LIBS
+fi
+{ $as_echo "$as_me:${as_lineno-$LINENO}: result: $ac_cv_lib_dld_dld_link" >&5
+$as_echo "$ac_cv_lib_dld_dld_link" >&6; }
+if test "x$ac_cv_lib_dld_dld_link" = x""yes; then :
+ lt_cv_dlopen="dld_link" lt_cv_dlopen_libs="-ldld"
+fi
+
+
+fi
+
+
+fi
+
+
+fi
+
+
+fi
+
+
+fi
+
+ ;;
+ esac
+
+ if test "x$lt_cv_dlopen" != xno; then
+ enable_dlopen=yes
+ else
+ enable_dlopen=no
+ fi
+
+ case $lt_cv_dlopen in
+ dlopen)
+ save_CPPFLAGS="$CPPFLAGS"
+ test "x$ac_cv_header_dlfcn_h" = xyes && CPPFLAGS="$CPPFLAGS -DHAVE_DLFCN_H"
+
+ save_LDFLAGS="$LDFLAGS"
+ wl=$lt_prog_compiler_wl eval LDFLAGS=\"\$LDFLAGS $export_dynamic_flag_spec\"
+
+ save_LIBS="$LIBS"
+ LIBS="$lt_cv_dlopen_libs $LIBS"
+
+ { $as_echo "$as_me:${as_lineno-$LINENO}: checking whether a program can dlopen itself" >&5
+$as_echo_n "checking whether a program can dlopen itself... " >&6; }
+if test "${lt_cv_dlopen_self+set}" = set; then :
+ $as_echo_n "(cached) " >&6
+else
+ if test "$cross_compiling" = yes; then :
+ lt_cv_dlopen_self=cross
+else
+ lt_dlunknown=0; lt_dlno_uscore=1; lt_dlneed_uscore=2
+ lt_status=$lt_dlunknown
+ cat > conftest.$ac_ext <<_LT_EOF
+#line 12925 "configure"
+#include "confdefs.h"
+
+#if HAVE_DLFCN_H
+#include <dlfcn.h>
+#endif
+
+#include <stdio.h>
+
+#ifdef RTLD_GLOBAL
+# define LT_DLGLOBAL RTLD_GLOBAL
+#else
+# ifdef DL_GLOBAL
+# define LT_DLGLOBAL DL_GLOBAL
+# else
+# define LT_DLGLOBAL 0
+# endif
+#endif
+
+/* We may have to define LT_DLLAZY_OR_NOW in the command line if we
+ find out it does not work in some platform. */
+#ifndef LT_DLLAZY_OR_NOW
+# ifdef RTLD_LAZY
+# define LT_DLLAZY_OR_NOW RTLD_LAZY
+# else
+# ifdef DL_LAZY
+# define LT_DLLAZY_OR_NOW DL_LAZY
+# else
+# ifdef RTLD_NOW
+# define LT_DLLAZY_OR_NOW RTLD_NOW
+# else
+# ifdef DL_NOW
+# define LT_DLLAZY_OR_NOW DL_NOW
+# else
+# define LT_DLLAZY_OR_NOW 0
+# endif
+# endif
+# endif
+# endif
+#endif
+
+void fnord() { int i=42;}
+int main ()
+{
+ void *self = dlopen (0, LT_DLGLOBAL|LT_DLLAZY_OR_NOW);
+ int status = $lt_dlunknown;
+
+ if (self)
+ {
+ if (dlsym (self,"fnord")) status = $lt_dlno_uscore;
+ else if (dlsym( self,"_fnord")) status = $lt_dlneed_uscore;
+ /* dlclose (self); */
+ }
+ else
+ puts (dlerror ());
+
+ return status;
+}
+_LT_EOF
+ if { { eval echo "\"\$as_me\":${as_lineno-$LINENO}: \"$ac_link\""; } >&5
+ (eval $ac_link) 2>&5
+ ac_status=$?
+ $as_echo "$as_me:${as_lineno-$LINENO}: \$? = $ac_status" >&5
+ test $ac_status = 0; } && test -s conftest${ac_exeext} 2>/dev/null; then
+ (./conftest; exit; ) >&5 2>/dev/null
+ lt_status=$?
+ case x$lt_status in
+ x$lt_dlno_uscore) lt_cv_dlopen_self=yes ;;
+ x$lt_dlneed_uscore) lt_cv_dlopen_self=yes ;;
+ x$lt_dlunknown|x*) lt_cv_dlopen_self=no ;;
+ esac
+ else :
+ # compilation failed
+ lt_cv_dlopen_self=no
+ fi
+fi
+rm -fr conftest*
+
+
+fi
+{ $as_echo "$as_me:${as_lineno-$LINENO}: result: $lt_cv_dlopen_self" >&5
+$as_echo "$lt_cv_dlopen_self" >&6; }
+
+ if test "x$lt_cv_dlopen_self" = xyes; then
+ wl=$lt_prog_compiler_wl eval LDFLAGS=\"\$LDFLAGS $lt_prog_compiler_static\"
+ { $as_echo "$as_me:${as_lineno-$LINENO}: checking whether a statically linked program can dlopen itself" >&5
+$as_echo_n "checking whether a statically linked program can dlopen itself... " >&6; }
+if test "${lt_cv_dlopen_self_static+set}" = set; then :
+ $as_echo_n "(cached) " >&6
+else
+ if test "$cross_compiling" = yes; then :
+ lt_cv_dlopen_self_static=cross
+else
+ lt_dlunknown=0; lt_dlno_uscore=1; lt_dlneed_uscore=2
+ lt_status=$lt_dlunknown
+ cat > conftest.$ac_ext <<_LT_EOF
+#line 13021 "configure"
+#include "confdefs.h"
+
+#if HAVE_DLFCN_H
+#include <dlfcn.h>
+#endif
+
+#include <stdio.h>
+
+#ifdef RTLD_GLOBAL
+# define LT_DLGLOBAL RTLD_GLOBAL
+#else
+# ifdef DL_GLOBAL
+# define LT_DLGLOBAL DL_GLOBAL
+# else
+# define LT_DLGLOBAL 0
+# endif
+#endif
+
+/* We may have to define LT_DLLAZY_OR_NOW in the command line if we
+ find out it does not work in some platform. */
+#ifndef LT_DLLAZY_OR_NOW
+# ifdef RTLD_LAZY
+# define LT_DLLAZY_OR_NOW RTLD_LAZY
+# else
+# ifdef DL_LAZY
+# define LT_DLLAZY_OR_NOW DL_LAZY
+# else
+# ifdef RTLD_NOW
+# define LT_DLLAZY_OR_NOW RTLD_NOW
+# else
+# ifdef DL_NOW
+# define LT_DLLAZY_OR_NOW DL_NOW
+# else
+# define LT_DLLAZY_OR_NOW 0
+# endif
+# endif
+# endif
+# endif
+#endif
+
+void fnord() { int i=42;}
+int main ()
+{
+ void *self = dlopen (0, LT_DLGLOBAL|LT_DLLAZY_OR_NOW);
+ int status = $lt_dlunknown;
+
+ if (self)
+ {
+ if (dlsym (self,"fnord")) status = $lt_dlno_uscore;
+ else if (dlsym( self,"_fnord")) status = $lt_dlneed_uscore;
+ /* dlclose (self); */
+ }
+ else
+ puts (dlerror ());
+
+ return status;
+}
+_LT_EOF
+ if { { eval echo "\"\$as_me\":${as_lineno-$LINENO}: \"$ac_link\""; } >&5
+ (eval $ac_link) 2>&5
+ ac_status=$?
+ $as_echo "$as_me:${as_lineno-$LINENO}: \$? = $ac_status" >&5
+ test $ac_status = 0; } && test -s conftest${ac_exeext} 2>/dev/null; then
+ (./conftest; exit; ) >&5 2>/dev/null
+ lt_status=$?
+ case x$lt_status in
+ x$lt_dlno_uscore) lt_cv_dlopen_self_static=yes ;;
+ x$lt_dlneed_uscore) lt_cv_dlopen_self_static=yes ;;
+ x$lt_dlunknown|x*) lt_cv_dlopen_self_static=no ;;
+ esac
+ else :
+ # compilation failed
+ lt_cv_dlopen_self_static=no
+ fi
+fi
+rm -fr conftest*
+
+
+fi
+{ $as_echo "$as_me:${as_lineno-$LINENO}: result: $lt_cv_dlopen_self_static" >&5
+$as_echo "$lt_cv_dlopen_self_static" >&6; }
+ fi
+
+ CPPFLAGS="$save_CPPFLAGS"
+ LDFLAGS="$save_LDFLAGS"
+ LIBS="$save_LIBS"
+ ;;
+ esac
+
+ case $lt_cv_dlopen_self in
+ yes|no) enable_dlopen_self=$lt_cv_dlopen_self ;;
+ *) enable_dlopen_self=unknown ;;
+ esac
+
+ case $lt_cv_dlopen_self_static in
+ yes|no) enable_dlopen_self_static=$lt_cv_dlopen_self_static ;;
+ *) enable_dlopen_self_static=unknown ;;
+ esac
+fi
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+striplib=
+old_striplib=
+{ $as_echo "$as_me:${as_lineno-$LINENO}: checking whether stripping libraries is possible" >&5
+$as_echo_n "checking whether stripping libraries is possible... " >&6; }
+if test -n "$STRIP" && $STRIP -V 2>&1 | $GREP "GNU strip" >/dev/null; then
+ test -z "$old_striplib" && old_striplib="$STRIP --strip-debug"
+ test -z "$striplib" && striplib="$STRIP --strip-unneeded"
+ { $as_echo "$as_me:${as_lineno-$LINENO}: result: yes" >&5
+$as_echo "yes" >&6; }
+else
+# FIXME - insert some real tests, host_os isn't really good enough
+ case $host_os in
+ darwin*)
+ if test -n "$STRIP" ; then
+ striplib="$STRIP -x"
+ old_striplib="$STRIP -S"
+ { $as_echo "$as_me:${as_lineno-$LINENO}: result: yes" >&5
+$as_echo "yes" >&6; }
+ else
+ { $as_echo "$as_me:${as_lineno-$LINENO}: result: no" >&5
+$as_echo "no" >&6; }
+ fi
+ ;;
+ *)
+ { $as_echo "$as_me:${as_lineno-$LINENO}: result: no" >&5
+$as_echo "no" >&6; }
+ ;;
+ esac
+fi
+
+
+
+
+
+
+
+
+
+
+
+
+ # Report which library types will actually be built
+ { $as_echo "$as_me:${as_lineno-$LINENO}: checking if libtool supports shared libraries" >&5
+$as_echo_n "checking if libtool supports shared libraries... " >&6; }
+ { $as_echo "$as_me:${as_lineno-$LINENO}: result: $can_build_shared" >&5
+$as_echo "$can_build_shared" >&6; }
+
+ { $as_echo "$as_me:${as_lineno-$LINENO}: checking whether to build shared libraries" >&5
+$as_echo_n "checking whether to build shared libraries... " >&6; }
+ test "$can_build_shared" = "no" && enable_shared=no
+
+ # On AIX, shared libraries and static libraries use the same namespace, and
+ # are all built from PIC.
+ case $host_os in
+ aix3*)
+ test "$enable_shared" = yes && enable_static=no
+ if test -n "$RANLIB"; then
+ archive_cmds="$archive_cmds~\$RANLIB \$lib"
+ postinstall_cmds='$RANLIB $lib'
+ fi
+ ;;
+
+ aix[4-9]*)
+ if test "$host_cpu" != ia64 && test "$aix_use_runtimelinking" = no ; then
+ test "$enable_shared" = yes && enable_static=no
+ fi
+ ;;
+ esac
+ { $as_echo "$as_me:${as_lineno-$LINENO}: result: $enable_shared" >&5
+$as_echo "$enable_shared" >&6; }
+
+ { $as_echo "$as_me:${as_lineno-$LINENO}: checking whether to build static libraries" >&5
+$as_echo_n "checking whether to build static libraries... " >&6; }
+ # Make sure either enable_shared or enable_static is yes.
+ test "$enable_shared" = yes || enable_static=yes
+ { $as_echo "$as_me:${as_lineno-$LINENO}: result: $enable_static" >&5
+$as_echo "$enable_static" >&6; }
+
+
+
+
+fi
+ac_ext=c
+ac_cpp='$CPP $CPPFLAGS'
+ac_compile='$CC -c $CFLAGS $CPPFLAGS conftest.$ac_ext >&5'
+ac_link='$CC -o conftest$ac_exeext $CFLAGS $CPPFLAGS $LDFLAGS conftest.$ac_ext $LIBS >&5'
+ac_compiler_gnu=$ac_cv_c_compiler_gnu
+
+CC="$lt_save_CC"
+
+
+
+
+
+
+
+
+
+
+
+
+
+ ac_config_commands="$ac_config_commands libtool"
+
+
+
+
+# Only expand once:
+
+
+if test -n "$ac_tool_prefix"; then
+ # Extract the first word of "${ac_tool_prefix}windres", so it can be a program name with args.
+set dummy ${ac_tool_prefix}windres; ac_word=$2
+{ $as_echo "$as_me:${as_lineno-$LINENO}: checking for $ac_word" >&5
+$as_echo_n "checking for $ac_word... " >&6; }
+if test "${ac_cv_prog_RC+set}" = set; then :
+ $as_echo_n "(cached) " >&6
+else
+ if test -n "$RC"; then
+ ac_cv_prog_RC="$RC" # Let the user override the test.
+else
+as_save_IFS=$IFS; IFS=$PATH_SEPARATOR
+for as_dir in $PATH
+do
+ IFS=$as_save_IFS
+ test -z "$as_dir" && as_dir=.
+ for ac_exec_ext in '' $ac_executable_extensions; do
+ if { test -f "$as_dir/$ac_word$ac_exec_ext" && $as_test_x "$as_dir/$ac_word$ac_exec_ext"; }; then
+ ac_cv_prog_RC="${ac_tool_prefix}windres"
+ $as_echo "$as_me:${as_lineno-$LINENO}: found $as_dir/$ac_word$ac_exec_ext" >&5
+ break 2
+ fi
+done
+ done
+IFS=$as_save_IFS
+
+fi
+fi
+RC=$ac_cv_prog_RC
+if test -n "$RC"; then
+ { $as_echo "$as_me:${as_lineno-$LINENO}: result: $RC" >&5
+$as_echo "$RC" >&6; }
+else
+ { $as_echo "$as_me:${as_lineno-$LINENO}: result: no" >&5
+$as_echo "no" >&6; }
+fi
+
+
+fi
+if test -z "$ac_cv_prog_RC"; then
+ ac_ct_RC=$RC
+ # Extract the first word of "windres", so it can be a program name with args.
+set dummy windres; ac_word=$2
+{ $as_echo "$as_me:${as_lineno-$LINENO}: checking for $ac_word" >&5
+$as_echo_n "checking for $ac_word... " >&6; }
+if test "${ac_cv_prog_ac_ct_RC+set}" = set; then :
+ $as_echo_n "(cached) " >&6
+else
+ if test -n "$ac_ct_RC"; then
+ ac_cv_prog_ac_ct_RC="$ac_ct_RC" # Let the user override the test.
+else
+as_save_IFS=$IFS; IFS=$PATH_SEPARATOR
+for as_dir in $PATH
+do
+ IFS=$as_save_IFS
+ test -z "$as_dir" && as_dir=.
+ for ac_exec_ext in '' $ac_executable_extensions; do
+ if { test -f "$as_dir/$ac_word$ac_exec_ext" && $as_test_x "$as_dir/$ac_word$ac_exec_ext"; }; then
+ ac_cv_prog_ac_ct_RC="windres"
+ $as_echo "$as_me:${as_lineno-$LINENO}: found $as_dir/$ac_word$ac_exec_ext" >&5
+ break 2
+ fi
+done
+ done
+IFS=$as_save_IFS
+
+fi
+fi
+ac_ct_RC=$ac_cv_prog_ac_ct_RC
+if test -n "$ac_ct_RC"; then
+ { $as_echo "$as_me:${as_lineno-$LINENO}: result: $ac_ct_RC" >&5
+$as_echo "$ac_ct_RC" >&6; }
+else
+ { $as_echo "$as_me:${as_lineno-$LINENO}: result: no" >&5
+$as_echo "no" >&6; }
+fi
+
+ if test "x$ac_ct_RC" = x; then
+ RC=""
+ else
+ case $cross_compiling:$ac_tool_warned in
+yes:)
+{ $as_echo "$as_me:${as_lineno-$LINENO}: WARNING: using cross tools not prefixed with host triplet" >&5
+$as_echo "$as_me: WARNING: using cross tools not prefixed with host triplet" >&2;}
+ac_tool_warned=yes ;;
+esac
+ RC=$ac_ct_RC
+ fi
+else
+ RC="$ac_cv_prog_RC"
+fi
+
+
+
+
+# Source file extension for RC test sources.
+ac_ext=rc
+
+# Object file extension for compiled RC test sources.
+objext=o
+objext_RC=$objext
+
+# Code to be used in simple compile tests
+lt_simple_compile_test_code='sample MENU { MENUITEM "&Soup", 100, CHECKED }'
+
+# Code to be used in simple link tests
+lt_simple_link_test_code="$lt_simple_compile_test_code"
+
+# ltmain only uses $CC for tagged configurations so make sure $CC is set.
+
+
+
+
+
+
+# If no C compiler was specified, use CC.
+LTCC=${LTCC-"$CC"}
+
+# If no C compiler flags were specified, use CFLAGS.
+LTCFLAGS=${LTCFLAGS-"$CFLAGS"}
+
+# Allow CC to be a program name with arguments.
+compiler=$CC
+
+
+# save warnings/boilerplate of simple test code
+ac_outfile=conftest.$ac_objext
+echo "$lt_simple_compile_test_code" >conftest.$ac_ext
+eval "$ac_compile" 2>&1 >/dev/null | $SED '/^$/d; /^ *+/d' >conftest.err
+_lt_compiler_boilerplate=`cat conftest.err`
+$RM conftest*
+
+ac_outfile=conftest.$ac_objext
+echo "$lt_simple_link_test_code" >conftest.$ac_ext
+eval "$ac_link" 2>&1 >/dev/null | $SED '/^$/d; /^ *+/d' >conftest.err
+_lt_linker_boilerplate=`cat conftest.err`
+$RM -r conftest*
+
+
+# Allow CC to be a program name with arguments.
+lt_save_CC="$CC"
+lt_save_GCC=$GCC
+GCC=
+CC=${RC-"windres"}
+compiler=$CC
+compiler_RC=$CC
+for cc_temp in $compiler""; do
+ case $cc_temp in
+ compile | *[\\/]compile | ccache | *[\\/]ccache ) ;;
+ distcc | *[\\/]distcc | purify | *[\\/]purify ) ;;
+ \-*) ;;
+ *) break;;
+ esac
+done
+cc_basename=`$ECHO "X$cc_temp" | $Xsed -e 's%.*/%%' -e "s%^$host_alias-%%"`
+
+lt_cv_prog_compiler_c_o_RC=yes
+
+if test -n "$compiler"; then
+ :
+
+
+
+fi
+
+GCC=$lt_save_GCC
+ac_ext=c
+ac_cpp='$CPP $CPPFLAGS'
+ac_compile='$CC -c $CFLAGS $CPPFLAGS conftest.$ac_ext >&5'
+ac_link='$CC -o conftest$ac_exeext $CFLAGS $CPPFLAGS $LDFLAGS conftest.$ac_ext $LIBS >&5'
+ac_compiler_gnu=$ac_cv_c_compiler_gnu
+
+CC="$lt_save_CC"
+
+
+# This is a bit wrong since it is possible to request that only some libs
+# are built as shared. Using that feature isn't so common though, and this
+# breaks only on Windows (at least for now) if the user enables only some
+# libs as shared.
+ if test "x$enable_shared" != xno; then
+ COND_SHARED_TRUE=
+ COND_SHARED_FALSE='#'
+else
+ COND_SHARED_TRUE='#'
+ COND_SHARED_FALSE=
+fi
+
+
+
+###############################################################################
+# Checks for libraries.
+###############################################################################
+
+echo
+echo "Initializing gettext:"
+
+
+ { $as_echo "$as_me:${as_lineno-$LINENO}: checking whether NLS is requested" >&5
+$as_echo_n "checking whether NLS is requested... " >&6; }
+ # Check whether --enable-nls was given.
+if test "${enable_nls+set}" = set; then :
+ enableval=$enable_nls; USE_NLS=$enableval
+else
+ USE_NLS=yes
+fi
+
+ { $as_echo "$as_me:${as_lineno-$LINENO}: result: $USE_NLS" >&5
+$as_echo "$USE_NLS" >&6; }
+
+
+
+
+
+
+# Prepare PATH_SEPARATOR.
+# The user is always right.
+if test "${PATH_SEPARATOR+set}" != set; then
+ echo "#! /bin/sh" >conf$$.sh
+ echo "exit 0" >>conf$$.sh
+ chmod +x conf$$.sh
+ if (PATH="/nonexistent;."; conf$$.sh) >/dev/null 2>&1; then
+ PATH_SEPARATOR=';'
+ else
+ PATH_SEPARATOR=:
+ fi
+ rm -f conf$$.sh
+fi
+
+# Find out how to test for executable files. Don't use a zero-byte file,
+# as systems may use methods other than mode bits to determine executability.
+cat >conf$$.file <<_ASEOF
+#! /bin/sh
+exit 0
+_ASEOF
+chmod +x conf$$.file
+if test -x conf$$.file >/dev/null 2>&1; then
+ ac_executable_p="test -x"
+else
+ ac_executable_p="test -f"
+fi
+rm -f conf$$.file
+
+# Extract the first word of "msgfmt", so it can be a program name with args.
+set dummy msgfmt; ac_word=$2
+{ $as_echo "$as_me:${as_lineno-$LINENO}: checking for $ac_word" >&5
+$as_echo_n "checking for $ac_word... " >&6; }
+if test "${ac_cv_path_MSGFMT+set}" = set; then :
+ $as_echo_n "(cached) " >&6
+else
+ case "$MSGFMT" in
+ [\\/]* | ?:[\\/]*)
+ ac_cv_path_MSGFMT="$MSGFMT" # Let the user override the test with a path.
+ ;;
+ *)
+ ac_save_IFS="$IFS"; IFS=$PATH_SEPARATOR
+ for ac_dir in $PATH; do
+ IFS="$ac_save_IFS"
+ test -z "$ac_dir" && ac_dir=.
+ for ac_exec_ext in '' $ac_executable_extensions; do
+ if $ac_executable_p "$ac_dir/$ac_word$ac_exec_ext"; then
+ echo "$as_me: trying $ac_dir/$ac_word..." >&5
+ if $ac_dir/$ac_word --statistics /dev/null >&5 2>&1 &&
+ (if $ac_dir/$ac_word --statistics /dev/null 2>&1 >/dev/null | grep usage >/dev/null; then exit 1; else exit 0; fi); then
+ ac_cv_path_MSGFMT="$ac_dir/$ac_word$ac_exec_ext"
+ break 2
+ fi
+ fi
+ done
+ done
+ IFS="$ac_save_IFS"
+ test -z "$ac_cv_path_MSGFMT" && ac_cv_path_MSGFMT=":"
+ ;;
+esac
+fi
+MSGFMT="$ac_cv_path_MSGFMT"
+if test "$MSGFMT" != ":"; then
+ { $as_echo "$as_me:${as_lineno-$LINENO}: result: $MSGFMT" >&5
+$as_echo "$MSGFMT" >&6; }
+else
+ { $as_echo "$as_me:${as_lineno-$LINENO}: result: no" >&5
+$as_echo "no" >&6; }
+fi
+
+ # Extract the first word of "gmsgfmt", so it can be a program name with args.
+set dummy gmsgfmt; ac_word=$2
+{ $as_echo "$as_me:${as_lineno-$LINENO}: checking for $ac_word" >&5
+$as_echo_n "checking for $ac_word... " >&6; }
+if test "${ac_cv_path_GMSGFMT+set}" = set; then :
+ $as_echo_n "(cached) " >&6
+else
+ case $GMSGFMT in
+ [\\/]* | ?:[\\/]*)
+ ac_cv_path_GMSGFMT="$GMSGFMT" # Let the user override the test with a path.
+ ;;
+ *)
+ as_save_IFS=$IFS; IFS=$PATH_SEPARATOR
+for as_dir in $PATH
+do
+ IFS=$as_save_IFS
+ test -z "$as_dir" && as_dir=.
+ for ac_exec_ext in '' $ac_executable_extensions; do
+ if { test -f "$as_dir/$ac_word$ac_exec_ext" && $as_test_x "$as_dir/$ac_word$ac_exec_ext"; }; then
+ ac_cv_path_GMSGFMT="$as_dir/$ac_word$ac_exec_ext"
+ $as_echo "$as_me:${as_lineno-$LINENO}: found $as_dir/$ac_word$ac_exec_ext" >&5
+ break 2
+ fi
+done
+ done
+IFS=$as_save_IFS
+
+ test -z "$ac_cv_path_GMSGFMT" && ac_cv_path_GMSGFMT="$MSGFMT"
+ ;;
+esac
+fi
+GMSGFMT=$ac_cv_path_GMSGFMT
+if test -n "$GMSGFMT"; then
+ { $as_echo "$as_me:${as_lineno-$LINENO}: result: $GMSGFMT" >&5
+$as_echo "$GMSGFMT" >&6; }
+else
+ { $as_echo "$as_me:${as_lineno-$LINENO}: result: no" >&5
+$as_echo "no" >&6; }
+fi
+
+
+
+ case `$MSGFMT --version | sed 1q | sed -e 's,^[^0-9]*,,'` in
+ '' | 0.[0-9] | 0.[0-9].* | 0.1[0-4] | 0.1[0-4].*) MSGFMT_015=: ;;
+ *) MSGFMT_015=$MSGFMT ;;
+ esac
+
+ case `$GMSGFMT --version | sed 1q | sed -e 's,^[^0-9]*,,'` in
+ '' | 0.[0-9] | 0.[0-9].* | 0.1[0-4] | 0.1[0-4].*) GMSGFMT_015=: ;;
+ *) GMSGFMT_015=$GMSGFMT ;;
+ esac
+
+
+
+# Prepare PATH_SEPARATOR.
+# The user is always right.
+if test "${PATH_SEPARATOR+set}" != set; then
+ echo "#! /bin/sh" >conf$$.sh
+ echo "exit 0" >>conf$$.sh
+ chmod +x conf$$.sh
+ if (PATH="/nonexistent;."; conf$$.sh) >/dev/null 2>&1; then
+ PATH_SEPARATOR=';'
+ else
+ PATH_SEPARATOR=:
+ fi
+ rm -f conf$$.sh
+fi
+
+# Find out how to test for executable files. Don't use a zero-byte file,
+# as systems may use methods other than mode bits to determine executability.
+cat >conf$$.file <<_ASEOF
+#! /bin/sh
+exit 0
+_ASEOF
+chmod +x conf$$.file
+if test -x conf$$.file >/dev/null 2>&1; then
+ ac_executable_p="test -x"
+else
+ ac_executable_p="test -f"
+fi
+rm -f conf$$.file
+
+# Extract the first word of "xgettext", so it can be a program name with args.
+set dummy xgettext; ac_word=$2
+{ $as_echo "$as_me:${as_lineno-$LINENO}: checking for $ac_word" >&5
+$as_echo_n "checking for $ac_word... " >&6; }
+if test "${ac_cv_path_XGETTEXT+set}" = set; then :
+ $as_echo_n "(cached) " >&6
+else
+ case "$XGETTEXT" in
+ [\\/]* | ?:[\\/]*)
+ ac_cv_path_XGETTEXT="$XGETTEXT" # Let the user override the test with a path.
+ ;;
+ *)
+ ac_save_IFS="$IFS"; IFS=$PATH_SEPARATOR
+ for ac_dir in $PATH; do
+ IFS="$ac_save_IFS"
+ test -z "$ac_dir" && ac_dir=.
+ for ac_exec_ext in '' $ac_executable_extensions; do
+ if $ac_executable_p "$ac_dir/$ac_word$ac_exec_ext"; then
+ echo "$as_me: trying $ac_dir/$ac_word..." >&5
+ if $ac_dir/$ac_word --omit-header --copyright-holder= --msgid-bugs-address= /dev/null >&5 2>&1 &&
+ (if $ac_dir/$ac_word --omit-header --copyright-holder= --msgid-bugs-address= /dev/null 2>&1 >/dev/null | grep usage >/dev/null; then exit 1; else exit 0; fi); then
+ ac_cv_path_XGETTEXT="$ac_dir/$ac_word$ac_exec_ext"
+ break 2
+ fi
+ fi
+ done
+ done
+ IFS="$ac_save_IFS"
+ test -z "$ac_cv_path_XGETTEXT" && ac_cv_path_XGETTEXT=":"
+ ;;
+esac
+fi
+XGETTEXT="$ac_cv_path_XGETTEXT"
+if test "$XGETTEXT" != ":"; then
+ { $as_echo "$as_me:${as_lineno-$LINENO}: result: $XGETTEXT" >&5
+$as_echo "$XGETTEXT" >&6; }
+else
+ { $as_echo "$as_me:${as_lineno-$LINENO}: result: no" >&5
+$as_echo "no" >&6; }
+fi
+
+ rm -f messages.po
+
+ case `$XGETTEXT --version | sed 1q | sed -e 's,^[^0-9]*,,'` in
+ '' | 0.[0-9] | 0.[0-9].* | 0.1[0-4] | 0.1[0-4].*) XGETTEXT_015=: ;;
+ *) XGETTEXT_015=$XGETTEXT ;;
+ esac
+
+
+
+# Prepare PATH_SEPARATOR.
+# The user is always right.
+if test "${PATH_SEPARATOR+set}" != set; then
+ echo "#! /bin/sh" >conf$$.sh
+ echo "exit 0" >>conf$$.sh
+ chmod +x conf$$.sh
+ if (PATH="/nonexistent;."; conf$$.sh) >/dev/null 2>&1; then
+ PATH_SEPARATOR=';'
+ else
+ PATH_SEPARATOR=:
+ fi
+ rm -f conf$$.sh
+fi
+
+# Find out how to test for executable files. Don't use a zero-byte file,
+# as systems may use methods other than mode bits to determine executability.
+cat >conf$$.file <<_ASEOF
+#! /bin/sh
+exit 0
+_ASEOF
+chmod +x conf$$.file
+if test -x conf$$.file >/dev/null 2>&1; then
+ ac_executable_p="test -x"
+else
+ ac_executable_p="test -f"
+fi
+rm -f conf$$.file
+
+# Extract the first word of "msgmerge", so it can be a program name with args.
+set dummy msgmerge; ac_word=$2
+{ $as_echo "$as_me:${as_lineno-$LINENO}: checking for $ac_word" >&5
+$as_echo_n "checking for $ac_word... " >&6; }
+if test "${ac_cv_path_MSGMERGE+set}" = set; then :
+ $as_echo_n "(cached) " >&6
+else
+ case "$MSGMERGE" in
+ [\\/]* | ?:[\\/]*)
+ ac_cv_path_MSGMERGE="$MSGMERGE" # Let the user override the test with a path.
+ ;;
+ *)
+ ac_save_IFS="$IFS"; IFS=$PATH_SEPARATOR
+ for ac_dir in $PATH; do
+ IFS="$ac_save_IFS"
+ test -z "$ac_dir" && ac_dir=.
+ for ac_exec_ext in '' $ac_executable_extensions; do
+ if $ac_executable_p "$ac_dir/$ac_word$ac_exec_ext"; then
+ echo "$as_me: trying $ac_dir/$ac_word..." >&5
+ if $ac_dir/$ac_word --update -q /dev/null /dev/null >&5 2>&1; then
+ ac_cv_path_MSGMERGE="$ac_dir/$ac_word$ac_exec_ext"
+ break 2
+ fi
+ fi
+ done
+ done
+ IFS="$ac_save_IFS"
+ test -z "$ac_cv_path_MSGMERGE" && ac_cv_path_MSGMERGE=":"
+ ;;
+esac
+fi
+MSGMERGE="$ac_cv_path_MSGMERGE"
+if test "$MSGMERGE" != ":"; then
+ { $as_echo "$as_me:${as_lineno-$LINENO}: result: $MSGMERGE" >&5
+$as_echo "$MSGMERGE" >&6; }
+else
+ { $as_echo "$as_me:${as_lineno-$LINENO}: result: no" >&5
+$as_echo "no" >&6; }
+fi
+
+
+ test -n "$localedir" || localedir='${datadir}/locale'
+
+
+ ac_config_commands="$ac_config_commands po-directories"
+
+
+
+ if test "X$prefix" = "XNONE"; then
+ acl_final_prefix="$ac_default_prefix"
+ else
+ acl_final_prefix="$prefix"
+ fi
+ if test "X$exec_prefix" = "XNONE"; then
+ acl_final_exec_prefix='${prefix}'
+ else
+ acl_final_exec_prefix="$exec_prefix"
+ fi
+ acl_save_prefix="$prefix"
+ prefix="$acl_final_prefix"
+ eval acl_final_exec_prefix=\"$acl_final_exec_prefix\"
+ prefix="$acl_save_prefix"
+
+
+# Check whether --with-gnu-ld was given.
+if test "${with_gnu_ld+set}" = set; then :
+ withval=$with_gnu_ld; test "$withval" = no || with_gnu_ld=yes
+else
+ with_gnu_ld=no
+fi
+
+# Prepare PATH_SEPARATOR.
+# The user is always right.
+if test "${PATH_SEPARATOR+set}" != set; then
+ echo "#! /bin/sh" >conf$$.sh
+ echo "exit 0" >>conf$$.sh
+ chmod +x conf$$.sh
+ if (PATH="/nonexistent;."; conf$$.sh) >/dev/null 2>&1; then
+ PATH_SEPARATOR=';'
+ else
+ PATH_SEPARATOR=:
+ fi
+ rm -f conf$$.sh
+fi
+ac_prog=ld
+if test "$GCC" = yes; then
+ # Check if gcc -print-prog-name=ld gives a path.
+ { $as_echo "$as_me:${as_lineno-$LINENO}: checking for ld used by GCC" >&5
+$as_echo_n "checking for ld used by GCC... " >&6; }
+ case $host in
+ *-*-mingw*)
+ # gcc leaves a trailing carriage return which upsets mingw
+ ac_prog=`($CC -print-prog-name=ld) 2>&5 | tr -d '\015'` ;;
+ *)
+ ac_prog=`($CC -print-prog-name=ld) 2>&5` ;;
+ esac
+ case $ac_prog in
+ # Accept absolute paths.
+ [\\/]* | [A-Za-z]:[\\/]*)
+ re_direlt='/[^/][^/]*/\.\./'
+ # Canonicalize the path of ld
+ ac_prog=`echo $ac_prog| sed 's%\\\\%/%g'`
+ while echo $ac_prog | grep "$re_direlt" > /dev/null 2>&1; do
+ ac_prog=`echo $ac_prog| sed "s%$re_direlt%/%"`
+ done
+ test -z "$LD" && LD="$ac_prog"
+ ;;
+ "")
+ # If it fails, then pretend we aren't using GCC.
+ ac_prog=ld
+ ;;
+ *)
+ # If it is relative, then search for the first ld in PATH.
+ with_gnu_ld=unknown
+ ;;
+ esac
+elif test "$with_gnu_ld" = yes; then
+ { $as_echo "$as_me:${as_lineno-$LINENO}: checking for GNU ld" >&5
+$as_echo_n "checking for GNU ld... " >&6; }
+else
+ { $as_echo "$as_me:${as_lineno-$LINENO}: checking for non-GNU ld" >&5
+$as_echo_n "checking for non-GNU ld... " >&6; }
+fi
+if test "${acl_cv_path_LD+set}" = set; then :
+ $as_echo_n "(cached) " >&6
+else
+ if test -z "$LD"; then
+ IFS="${IFS= }"; ac_save_ifs="$IFS"; IFS="${IFS}${PATH_SEPARATOR-:}"
+ for ac_dir in $PATH; do
+ test -z "$ac_dir" && ac_dir=.
+ if test -f "$ac_dir/$ac_prog" || test -f "$ac_dir/$ac_prog$ac_exeext"; then
+ acl_cv_path_LD="$ac_dir/$ac_prog"
+ # Check to see if the program is GNU ld. I'd rather use --version,
+ # but apparently some GNU ld's only accept -v.
+ # Break only if it was the GNU/non-GNU ld that we prefer.
+ case `"$acl_cv_path_LD" -v 2>&1 < /dev/null` in
+ *GNU* | *'with BFD'*)
+ test "$with_gnu_ld" != no && break ;;
+ *)
+ test "$with_gnu_ld" != yes && break ;;
+ esac
+ fi
+ done
+ IFS="$ac_save_ifs"
+else
+ acl_cv_path_LD="$LD" # Let the user override the test with a path.
+fi
+fi
+
+LD="$acl_cv_path_LD"
+if test -n "$LD"; then
+ { $as_echo "$as_me:${as_lineno-$LINENO}: result: $LD" >&5
+$as_echo "$LD" >&6; }
+else
+ { $as_echo "$as_me:${as_lineno-$LINENO}: result: no" >&5
+$as_echo "no" >&6; }
+fi
+test -z "$LD" && as_fn_error "no acceptable ld found in \$PATH" "$LINENO" 5
+{ $as_echo "$as_me:${as_lineno-$LINENO}: checking if the linker ($LD) is GNU ld" >&5
+$as_echo_n "checking if the linker ($LD) is GNU ld... " >&6; }
+if test "${acl_cv_prog_gnu_ld+set}" = set; then :
+ $as_echo_n "(cached) " >&6
+else
+ # I'd rather use --version here, but apparently some GNU ld's only accept -v.
+case `$LD -v 2>&1 </dev/null` in
+*GNU* | *'with BFD'*)
+ acl_cv_prog_gnu_ld=yes ;;
+*)
+ acl_cv_prog_gnu_ld=no ;;
+esac
+fi
+{ $as_echo "$as_me:${as_lineno-$LINENO}: result: $acl_cv_prog_gnu_ld" >&5
+$as_echo "$acl_cv_prog_gnu_ld" >&6; }
+with_gnu_ld=$acl_cv_prog_gnu_ld
+
+
+
+
+ { $as_echo "$as_me:${as_lineno-$LINENO}: checking for shared library run path origin" >&5
+$as_echo_n "checking for shared library run path origin... " >&6; }
+if test "${acl_cv_rpath+set}" = set; then :
+ $as_echo_n "(cached) " >&6
+else
+
+ CC="$CC" GCC="$GCC" LDFLAGS="$LDFLAGS" LD="$LD" with_gnu_ld="$with_gnu_ld" \
+ ${CONFIG_SHELL-/bin/sh} "$ac_aux_dir/config.rpath" "$host" > conftest.sh
+ . ./conftest.sh
+ rm -f ./conftest.sh
+ acl_cv_rpath=done
+
+fi
+{ $as_echo "$as_me:${as_lineno-$LINENO}: result: $acl_cv_rpath" >&5
+$as_echo "$acl_cv_rpath" >&6; }
+ wl="$acl_cv_wl"
+ libext="$acl_cv_libext"
+ shlibext="$acl_cv_shlibext"
+ hardcode_libdir_flag_spec="$acl_cv_hardcode_libdir_flag_spec"
+ hardcode_libdir_separator="$acl_cv_hardcode_libdir_separator"
+ hardcode_direct="$acl_cv_hardcode_direct"
+ hardcode_minus_L="$acl_cv_hardcode_minus_L"
+ # Check whether --enable-rpath was given.
+if test "${enable_rpath+set}" = set; then :
+ enableval=$enable_rpath; :
+else
+ enable_rpath=yes
+fi
+
+
+
+ acl_libdirstem=lib
+ searchpath=`(LC_ALL=C $CC -print-search-dirs) 2>/dev/null | sed -n -e 's,^libraries: ,,p' | sed -e 's,^=,,'`
+ if test -n "$searchpath"; then
+ acl_save_IFS="${IFS= }"; IFS=":"
+ for searchdir in $searchpath; do
+ if test -d "$searchdir"; then
+ case "$searchdir" in
+ */lib64/ | */lib64 ) acl_libdirstem=lib64 ;;
+ *) searchdir=`cd "$searchdir" && pwd`
+ case "$searchdir" in
+ */lib64 ) acl_libdirstem=lib64 ;;
+ esac ;;
+ esac
+ fi
+ done
+ IFS="$acl_save_IFS"
+ fi
+
+
+
+
+
+
+
+
+ use_additional=yes
+
+ acl_save_prefix="$prefix"
+ prefix="$acl_final_prefix"
+ acl_save_exec_prefix="$exec_prefix"
+ exec_prefix="$acl_final_exec_prefix"
+
+ eval additional_includedir=\"$includedir\"
+ eval additional_libdir=\"$libdir\"
+
+ exec_prefix="$acl_save_exec_prefix"
+ prefix="$acl_save_prefix"
+
+
+# Check whether --with-libiconv-prefix was given.
+if test "${with_libiconv_prefix+set}" = set; then :
+ withval=$with_libiconv_prefix;
+ if test "X$withval" = "Xno"; then
+ use_additional=no
+ else
+ if test "X$withval" = "X"; then
+
+ acl_save_prefix="$prefix"
+ prefix="$acl_final_prefix"
+ acl_save_exec_prefix="$exec_prefix"
+ exec_prefix="$acl_final_exec_prefix"
+
+ eval additional_includedir=\"$includedir\"
+ eval additional_libdir=\"$libdir\"
+
+ exec_prefix="$acl_save_exec_prefix"
+ prefix="$acl_save_prefix"
+
+ else
+ additional_includedir="$withval/include"
+ additional_libdir="$withval/$acl_libdirstem"
+ fi
+ fi
+
+fi
+
+ LIBICONV=
+ LTLIBICONV=
+ INCICONV=
+ rpathdirs=
+ ltrpathdirs=
+ names_already_handled=
+ names_next_round='iconv '
+ while test -n "$names_next_round"; do
+ names_this_round="$names_next_round"
+ names_next_round=
+ for name in $names_this_round; do
+ already_handled=
+ for n in $names_already_handled; do
+ if test "$n" = "$name"; then
+ already_handled=yes
+ break
+ fi
+ done
+ if test -z "$already_handled"; then
+ names_already_handled="$names_already_handled $name"
+ uppername=`echo "$name" | sed -e 'y|abcdefghijklmnopqrstuvwxyz./-|ABCDEFGHIJKLMNOPQRSTUVWXYZ___|'`
+ eval value=\"\$HAVE_LIB$uppername\"
+ if test -n "$value"; then
+ if test "$value" = yes; then
+ eval value=\"\$LIB$uppername\"
+ test -z "$value" || LIBICONV="${LIBICONV}${LIBICONV:+ }$value"
+ eval value=\"\$LTLIB$uppername\"
+ test -z "$value" || LTLIBICONV="${LTLIBICONV}${LTLIBICONV:+ }$value"
+ else
+ :
+ fi
+ else
+ found_dir=
+ found_la=
+ found_so=
+ found_a=
+ if test $use_additional = yes; then
+ if test -n "$shlibext" \
+ && { test -f "$additional_libdir/lib$name.$shlibext" \
+ || { test "$shlibext" = dll \
+ && test -f "$additional_libdir/lib$name.dll.a"; }; }; then
+ found_dir="$additional_libdir"
+ if test -f "$additional_libdir/lib$name.$shlibext"; then
+ found_so="$additional_libdir/lib$name.$shlibext"
+ else
+ found_so="$additional_libdir/lib$name.dll.a"
+ fi
+ if test -f "$additional_libdir/lib$name.la"; then
+ found_la="$additional_libdir/lib$name.la"
+ fi
+ else
+ if test -f "$additional_libdir/lib$name.$libext"; then
+ found_dir="$additional_libdir"
+ found_a="$additional_libdir/lib$name.$libext"
+ if test -f "$additional_libdir/lib$name.la"; then
+ found_la="$additional_libdir/lib$name.la"
+ fi
+ fi
+ fi
+ fi
+ if test "X$found_dir" = "X"; then
+ for x in $LDFLAGS $LTLIBICONV; do
+
+ acl_save_prefix="$prefix"
+ prefix="$acl_final_prefix"
+ acl_save_exec_prefix="$exec_prefix"
+ exec_prefix="$acl_final_exec_prefix"
+ eval x=\"$x\"
+ exec_prefix="$acl_save_exec_prefix"
+ prefix="$acl_save_prefix"
+
+ case "$x" in
+ -L*)
+ dir=`echo "X$x" | sed -e 's/^X-L//'`
+ if test -n "$shlibext" \
+ && { test -f "$dir/lib$name.$shlibext" \
+ || { test "$shlibext" = dll \
+ && test -f "$dir/lib$name.dll.a"; }; }; then
+ found_dir="$dir"
+ if test -f "$dir/lib$name.$shlibext"; then
+ found_so="$dir/lib$name.$shlibext"
+ else
+ found_so="$dir/lib$name.dll.a"
+ fi
+ if test -f "$dir/lib$name.la"; then
+ found_la="$dir/lib$name.la"
+ fi
+ else
+ if test -f "$dir/lib$name.$libext"; then
+ found_dir="$dir"
+ found_a="$dir/lib$name.$libext"
+ if test -f "$dir/lib$name.la"; then
+ found_la="$dir/lib$name.la"
+ fi
+ fi
+ fi
+ ;;
+ esac
+ if test "X$found_dir" != "X"; then
+ break
+ fi
+ done
+ fi
+ if test "X$found_dir" != "X"; then
+ LTLIBICONV="${LTLIBICONV}${LTLIBICONV:+ }-L$found_dir -l$name"
+ if test "X$found_so" != "X"; then
+ if test "$enable_rpath" = no || test "X$found_dir" = "X/usr/$acl_libdirstem"; then
+ LIBICONV="${LIBICONV}${LIBICONV:+ }$found_so"
+ else
+ haveit=
+ for x in $ltrpathdirs; do
+ if test "X$x" = "X$found_dir"; then
+ haveit=yes
+ break
+ fi
+ done
+ if test -z "$haveit"; then
+ ltrpathdirs="$ltrpathdirs $found_dir"
+ fi
+ if test "$hardcode_direct" = yes; then
+ LIBICONV="${LIBICONV}${LIBICONV:+ }$found_so"
+ else
+ if test -n "$hardcode_libdir_flag_spec" && test "$hardcode_minus_L" = no; then
+ LIBICONV="${LIBICONV}${LIBICONV:+ }$found_so"
+ haveit=
+ for x in $rpathdirs; do
+ if test "X$x" = "X$found_dir"; then
+ haveit=yes
+ break
+ fi
+ done
+ if test -z "$haveit"; then
+ rpathdirs="$rpathdirs $found_dir"
+ fi
+ else
+ haveit=
+ for x in $LDFLAGS $LIBICONV; do
+
+ acl_save_prefix="$prefix"
+ prefix="$acl_final_prefix"
+ acl_save_exec_prefix="$exec_prefix"
+ exec_prefix="$acl_final_exec_prefix"
+ eval x=\"$x\"
+ exec_prefix="$acl_save_exec_prefix"
+ prefix="$acl_save_prefix"
+
+ if test "X$x" = "X-L$found_dir"; then
+ haveit=yes
+ break
+ fi
+ done
+ if test -z "$haveit"; then
+ LIBICONV="${LIBICONV}${LIBICONV:+ }-L$found_dir"
+ fi
+ if test "$hardcode_minus_L" != no; then
+ LIBICONV="${LIBICONV}${LIBICONV:+ }$found_so"
+ else
+ LIBICONV="${LIBICONV}${LIBICONV:+ }-l$name"
+ fi
+ fi
+ fi
+ fi
+ else
+ if test "X$found_a" != "X"; then
+ LIBICONV="${LIBICONV}${LIBICONV:+ }$found_a"
+ else
+ LIBICONV="${LIBICONV}${LIBICONV:+ }-L$found_dir -l$name"
+ fi
+ fi
+ additional_includedir=
+ case "$found_dir" in
+ */$acl_libdirstem | */$acl_libdirstem/)
+ basedir=`echo "X$found_dir" | sed -e 's,^X,,' -e "s,/$acl_libdirstem/"'*$,,'`
+ additional_includedir="$basedir/include"
+ ;;
+ esac
+ if test "X$additional_includedir" != "X"; then
+ if test "X$additional_includedir" != "X/usr/include"; then
+ haveit=
+ if test "X$additional_includedir" = "X/usr/local/include"; then
+ if test -n "$GCC"; then
+ case $host_os in
+ linux* | gnu* | k*bsd*-gnu) haveit=yes;;
+ esac
+ fi
+ fi
+ if test -z "$haveit"; then
+ for x in $CPPFLAGS $INCICONV; do
+
+ acl_save_prefix="$prefix"
+ prefix="$acl_final_prefix"
+ acl_save_exec_prefix="$exec_prefix"
+ exec_prefix="$acl_final_exec_prefix"
+ eval x=\"$x\"
+ exec_prefix="$acl_save_exec_prefix"
+ prefix="$acl_save_prefix"
+
+ if test "X$x" = "X-I$additional_includedir"; then
+ haveit=yes
+ break
+ fi
+ done
+ if test -z "$haveit"; then
+ if test -d "$additional_includedir"; then
+ INCICONV="${INCICONV}${INCICONV:+ }-I$additional_includedir"
+ fi
+ fi
+ fi
+ fi
+ fi
+ if test -n "$found_la"; then
+ save_libdir="$libdir"
+ case "$found_la" in
+ */* | *\\*) . "$found_la" ;;
+ *) . "./$found_la" ;;
+ esac
+ libdir="$save_libdir"
+ for dep in $dependency_libs; do
+ case "$dep" in
+ -L*)
+ additional_libdir=`echo "X$dep" | sed -e 's/^X-L//'`
+ if test "X$additional_libdir" != "X/usr/$acl_libdirstem"; then
+ haveit=
+ if test "X$additional_libdir" = "X/usr/local/$acl_libdirstem"; then
+ if test -n "$GCC"; then
+ case $host_os in
+ linux* | gnu* | k*bsd*-gnu) haveit=yes;;
+ esac
+ fi
+ fi
+ if test -z "$haveit"; then
+ haveit=
+ for x in $LDFLAGS $LIBICONV; do
+
+ acl_save_prefix="$prefix"
+ prefix="$acl_final_prefix"
+ acl_save_exec_prefix="$exec_prefix"
+ exec_prefix="$acl_final_exec_prefix"
+ eval x=\"$x\"
+ exec_prefix="$acl_save_exec_prefix"
+ prefix="$acl_save_prefix"
+
+ if test "X$x" = "X-L$additional_libdir"; then
+ haveit=yes
+ break
+ fi
+ done
+ if test -z "$haveit"; then
+ if test -d "$additional_libdir"; then
+ LIBICONV="${LIBICONV}${LIBICONV:+ }-L$additional_libdir"
+ fi
+ fi
+ haveit=
+ for x in $LDFLAGS $LTLIBICONV; do
+
+ acl_save_prefix="$prefix"
+ prefix="$acl_final_prefix"
+ acl_save_exec_prefix="$exec_prefix"
+ exec_prefix="$acl_final_exec_prefix"
+ eval x=\"$x\"
+ exec_prefix="$acl_save_exec_prefix"
+ prefix="$acl_save_prefix"
+
+ if test "X$x" = "X-L$additional_libdir"; then
+ haveit=yes
+ break
+ fi
+ done
+ if test -z "$haveit"; then
+ if test -d "$additional_libdir"; then
+ LTLIBICONV="${LTLIBICONV}${LTLIBICONV:+ }-L$additional_libdir"
+ fi
+ fi
+ fi
+ fi
+ ;;
+ -R*)
+ dir=`echo "X$dep" | sed -e 's/^X-R//'`
+ if test "$enable_rpath" != no; then
+ haveit=
+ for x in $rpathdirs; do
+ if test "X$x" = "X$dir"; then
+ haveit=yes
+ break
+ fi
+ done
+ if test -z "$haveit"; then
+ rpathdirs="$rpathdirs $dir"
+ fi
+ haveit=
+ for x in $ltrpathdirs; do
+ if test "X$x" = "X$dir"; then
+ haveit=yes
+ break
+ fi
+ done
+ if test -z "$haveit"; then
+ ltrpathdirs="$ltrpathdirs $dir"
+ fi
+ fi
+ ;;
+ -l*)
+ names_next_round="$names_next_round "`echo "X$dep" | sed -e 's/^X-l//'`
+ ;;
+ *.la)
+ names_next_round="$names_next_round "`echo "X$dep" | sed -e 's,^X.*/,,' -e 's,^lib,,' -e 's,\.la$,,'`
+ ;;
+ *)
+ LIBICONV="${LIBICONV}${LIBICONV:+ }$dep"
+ LTLIBICONV="${LTLIBICONV}${LTLIBICONV:+ }$dep"
+ ;;
+ esac
+ done
+ fi
+ else
+ LIBICONV="${LIBICONV}${LIBICONV:+ }-l$name"
+ LTLIBICONV="${LTLIBICONV}${LTLIBICONV:+ }-l$name"
+ fi
+ fi
+ fi
+ done
+ done
+ if test "X$rpathdirs" != "X"; then
+ if test -n "$hardcode_libdir_separator"; then
+ alldirs=
+ for found_dir in $rpathdirs; do
+ alldirs="${alldirs}${alldirs:+$hardcode_libdir_separator}$found_dir"
+ done
+ acl_save_libdir="$libdir"
+ libdir="$alldirs"
+ eval flag=\"$hardcode_libdir_flag_spec\"
+ libdir="$acl_save_libdir"
+ LIBICONV="${LIBICONV}${LIBICONV:+ }$flag"
+ else
+ for found_dir in $rpathdirs; do
+ acl_save_libdir="$libdir"
+ libdir="$found_dir"
+ eval flag=\"$hardcode_libdir_flag_spec\"
+ libdir="$acl_save_libdir"
+ LIBICONV="${LIBICONV}${LIBICONV:+ }$flag"
+ done
+ fi
+ fi
+ if test "X$ltrpathdirs" != "X"; then
+ for found_dir in $ltrpathdirs; do
+ LTLIBICONV="${LTLIBICONV}${LTLIBICONV:+ }-R$found_dir"
+ done
+ fi
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+ { $as_echo "$as_me:${as_lineno-$LINENO}: checking for CFPreferencesCopyAppValue" >&5
+$as_echo_n "checking for CFPreferencesCopyAppValue... " >&6; }
+if test "${gt_cv_func_CFPreferencesCopyAppValue+set}" = set; then :
+ $as_echo_n "(cached) " >&6
+else
+ gt_save_LIBS="$LIBS"
+ LIBS="$LIBS -Wl,-framework -Wl,CoreFoundation"
+ cat confdefs.h - <<_ACEOF >conftest.$ac_ext
+/* end confdefs.h. */
+#include <CoreFoundation/CFPreferences.h>
+int
+main ()
+{
+CFPreferencesCopyAppValue(NULL, NULL)
+ ;
+ return 0;
+}
+_ACEOF
+if ac_fn_c_try_link "$LINENO"; then :
+ gt_cv_func_CFPreferencesCopyAppValue=yes
+else
+ gt_cv_func_CFPreferencesCopyAppValue=no
+fi
+rm -f core conftest.err conftest.$ac_objext \
+ conftest$ac_exeext conftest.$ac_ext
+ LIBS="$gt_save_LIBS"
+fi
+{ $as_echo "$as_me:${as_lineno-$LINENO}: result: $gt_cv_func_CFPreferencesCopyAppValue" >&5
+$as_echo "$gt_cv_func_CFPreferencesCopyAppValue" >&6; }
+ if test $gt_cv_func_CFPreferencesCopyAppValue = yes; then
+
+$as_echo "#define HAVE_CFPREFERENCESCOPYAPPVALUE 1" >>confdefs.h
+
+ fi
+ { $as_echo "$as_me:${as_lineno-$LINENO}: checking for CFLocaleCopyCurrent" >&5
+$as_echo_n "checking for CFLocaleCopyCurrent... " >&6; }
+if test "${gt_cv_func_CFLocaleCopyCurrent+set}" = set; then :
+ $as_echo_n "(cached) " >&6
+else
+ gt_save_LIBS="$LIBS"
+ LIBS="$LIBS -Wl,-framework -Wl,CoreFoundation"
+ cat confdefs.h - <<_ACEOF >conftest.$ac_ext
+/* end confdefs.h. */
+#include <CoreFoundation/CFLocale.h>
+int
+main ()
+{
+CFLocaleCopyCurrent();
+ ;
+ return 0;
+}
+_ACEOF
+if ac_fn_c_try_link "$LINENO"; then :
+ gt_cv_func_CFLocaleCopyCurrent=yes
+else
+ gt_cv_func_CFLocaleCopyCurrent=no
+fi
+rm -f core conftest.err conftest.$ac_objext \
+ conftest$ac_exeext conftest.$ac_ext
+ LIBS="$gt_save_LIBS"
+fi
+{ $as_echo "$as_me:${as_lineno-$LINENO}: result: $gt_cv_func_CFLocaleCopyCurrent" >&5
+$as_echo "$gt_cv_func_CFLocaleCopyCurrent" >&6; }
+ if test $gt_cv_func_CFLocaleCopyCurrent = yes; then
+
+$as_echo "#define HAVE_CFLOCALECOPYCURRENT 1" >>confdefs.h
+
+ fi
+ INTL_MACOSX_LIBS=
+ if test $gt_cv_func_CFPreferencesCopyAppValue = yes || test $gt_cv_func_CFLocaleCopyCurrent = yes; then
+ INTL_MACOSX_LIBS="-Wl,-framework -Wl,CoreFoundation"
+ fi
+
+
+
+
+
+
+ LIBINTL=
+ LTLIBINTL=
+ POSUB=
+
+ case " $gt_needs " in
+ *" need-formatstring-macros "*) gt_api_version=3 ;;
+ *" need-ngettext "*) gt_api_version=2 ;;
+ *) gt_api_version=1 ;;
+ esac
+ gt_func_gnugettext_libc="gt_cv_func_gnugettext${gt_api_version}_libc"
+ gt_func_gnugettext_libintl="gt_cv_func_gnugettext${gt_api_version}_libintl"
+
+ if test "$USE_NLS" = "yes"; then
+ gt_use_preinstalled_gnugettext=no
+
+
+ if test $gt_api_version -ge 3; then
+ gt_revision_test_code='
+#ifndef __GNU_GETTEXT_SUPPORTED_REVISION
+#define __GNU_GETTEXT_SUPPORTED_REVISION(major) ((major) == 0 ? 0 : -1)
+#endif
+typedef int array [2 * (__GNU_GETTEXT_SUPPORTED_REVISION(0) >= 1) - 1];
+'
+ else
+ gt_revision_test_code=
+ fi
+ if test $gt_api_version -ge 2; then
+ gt_expression_test_code=' + * ngettext ("", "", 0)'
+ else
+ gt_expression_test_code=
+ fi
+
+ { $as_echo "$as_me:${as_lineno-$LINENO}: checking for GNU gettext in libc" >&5
+$as_echo_n "checking for GNU gettext in libc... " >&6; }
+if { as_var=$gt_func_gnugettext_libc; eval "test \"\${$as_var+set}\" = set"; }; then :
+ $as_echo_n "(cached) " >&6
+else
+ cat confdefs.h - <<_ACEOF >conftest.$ac_ext
+/* end confdefs.h. */
+#include <libintl.h>
+$gt_revision_test_code
+extern int _nl_msg_cat_cntr;
+extern int *_nl_domain_bindings;
+int
+main ()
+{
+bindtextdomain ("", "");
+return * gettext ("")$gt_expression_test_code + _nl_msg_cat_cntr + *_nl_domain_bindings
+ ;
+ return 0;
+}
+_ACEOF
+if ac_fn_c_try_link "$LINENO"; then :
+ eval "$gt_func_gnugettext_libc=yes"
+else
+ eval "$gt_func_gnugettext_libc=no"
+fi
+rm -f core conftest.err conftest.$ac_objext \
+ conftest$ac_exeext conftest.$ac_ext
+fi
+eval ac_res=\$$gt_func_gnugettext_libc
+ { $as_echo "$as_me:${as_lineno-$LINENO}: result: $ac_res" >&5
+$as_echo "$ac_res" >&6; }
+
+ if { eval "gt_val=\$$gt_func_gnugettext_libc"; test "$gt_val" != "yes"; }; then
+
+
+
+
+
+ am_save_CPPFLAGS="$CPPFLAGS"
+
+ for element in $INCICONV; do
+ haveit=
+ for x in $CPPFLAGS; do
+
+ acl_save_prefix="$prefix"
+ prefix="$acl_final_prefix"
+ acl_save_exec_prefix="$exec_prefix"
+ exec_prefix="$acl_final_exec_prefix"
+ eval x=\"$x\"
+ exec_prefix="$acl_save_exec_prefix"
+ prefix="$acl_save_prefix"
+
+ if test "X$x" = "X$element"; then
+ haveit=yes
+ break
+ fi
+ done
+ if test -z "$haveit"; then
+ CPPFLAGS="${CPPFLAGS}${CPPFLAGS:+ }$element"
+ fi
+ done
+
+
+ { $as_echo "$as_me:${as_lineno-$LINENO}: checking for iconv" >&5
+$as_echo_n "checking for iconv... " >&6; }
+if test "${am_cv_func_iconv+set}" = set; then :
+ $as_echo_n "(cached) " >&6
+else
+
+ am_cv_func_iconv="no, consider installing GNU libiconv"
+ am_cv_lib_iconv=no
+ cat confdefs.h - <<_ACEOF >conftest.$ac_ext
+/* end confdefs.h. */
+#include <stdlib.h>
+#include <iconv.h>
+int
+main ()
+{
+iconv_t cd = iconv_open("","");
+ iconv(cd,NULL,NULL,NULL,NULL);
+ iconv_close(cd);
+ ;
+ return 0;
+}
+_ACEOF
+if ac_fn_c_try_link "$LINENO"; then :
+ am_cv_func_iconv=yes
+fi
+rm -f core conftest.err conftest.$ac_objext \
+ conftest$ac_exeext conftest.$ac_ext
+ if test "$am_cv_func_iconv" != yes; then
+ am_save_LIBS="$LIBS"
+ LIBS="$LIBS $LIBICONV"
+ cat confdefs.h - <<_ACEOF >conftest.$ac_ext
+/* end confdefs.h. */
+#include <stdlib.h>
+#include <iconv.h>
+int
+main ()
+{
+iconv_t cd = iconv_open("","");
+ iconv(cd,NULL,NULL,NULL,NULL);
+ iconv_close(cd);
+ ;
+ return 0;
+}
+_ACEOF
+if ac_fn_c_try_link "$LINENO"; then :
+ am_cv_lib_iconv=yes
+ am_cv_func_iconv=yes
+fi
+rm -f core conftest.err conftest.$ac_objext \
+ conftest$ac_exeext conftest.$ac_ext
+ LIBS="$am_save_LIBS"
+ fi
+
+fi
+{ $as_echo "$as_me:${as_lineno-$LINENO}: result: $am_cv_func_iconv" >&5
+$as_echo "$am_cv_func_iconv" >&6; }
+ if test "$am_cv_func_iconv" = yes; then
+
+$as_echo "#define HAVE_ICONV 1" >>confdefs.h
+
+ fi
+ if test "$am_cv_lib_iconv" = yes; then
+ { $as_echo "$as_me:${as_lineno-$LINENO}: checking how to link with libiconv" >&5
+$as_echo_n "checking how to link with libiconv... " >&6; }
+ { $as_echo "$as_me:${as_lineno-$LINENO}: result: $LIBICONV" >&5
+$as_echo "$LIBICONV" >&6; }
+ else
+ CPPFLAGS="$am_save_CPPFLAGS"
+ LIBICONV=
+ LTLIBICONV=
+ fi
+
+
+
+
+
+
+
+ use_additional=yes
+
+ acl_save_prefix="$prefix"
+ prefix="$acl_final_prefix"
+ acl_save_exec_prefix="$exec_prefix"
+ exec_prefix="$acl_final_exec_prefix"
+
+ eval additional_includedir=\"$includedir\"
+ eval additional_libdir=\"$libdir\"
+
+ exec_prefix="$acl_save_exec_prefix"
+ prefix="$acl_save_prefix"
+
+
+# Check whether --with-libintl-prefix was given.
+if test "${with_libintl_prefix+set}" = set; then :
+ withval=$with_libintl_prefix;
+ if test "X$withval" = "Xno"; then
+ use_additional=no
+ else
+ if test "X$withval" = "X"; then
+
+ acl_save_prefix="$prefix"
+ prefix="$acl_final_prefix"
+ acl_save_exec_prefix="$exec_prefix"
+ exec_prefix="$acl_final_exec_prefix"
+
+ eval additional_includedir=\"$includedir\"
+ eval additional_libdir=\"$libdir\"
+
+ exec_prefix="$acl_save_exec_prefix"
+ prefix="$acl_save_prefix"
+
+ else
+ additional_includedir="$withval/include"
+ additional_libdir="$withval/$acl_libdirstem"
+ fi
+ fi
+
+fi
+
+ LIBINTL=
+ LTLIBINTL=
+ INCINTL=
+ rpathdirs=
+ ltrpathdirs=
+ names_already_handled=
+ names_next_round='intl '
+ while test -n "$names_next_round"; do
+ names_this_round="$names_next_round"
+ names_next_round=
+ for name in $names_this_round; do
+ already_handled=
+ for n in $names_already_handled; do
+ if test "$n" = "$name"; then
+ already_handled=yes
+ break
+ fi
+ done
+ if test -z "$already_handled"; then
+ names_already_handled="$names_already_handled $name"
+ uppername=`echo "$name" | sed -e 'y|abcdefghijklmnopqrstuvwxyz./-|ABCDEFGHIJKLMNOPQRSTUVWXYZ___|'`
+ eval value=\"\$HAVE_LIB$uppername\"
+ if test -n "$value"; then
+ if test "$value" = yes; then
+ eval value=\"\$LIB$uppername\"
+ test -z "$value" || LIBINTL="${LIBINTL}${LIBINTL:+ }$value"
+ eval value=\"\$LTLIB$uppername\"
+ test -z "$value" || LTLIBINTL="${LTLIBINTL}${LTLIBINTL:+ }$value"
+ else
+ :
+ fi
+ else
+ found_dir=
+ found_la=
+ found_so=
+ found_a=
+ if test $use_additional = yes; then
+ if test -n "$shlibext" \
+ && { test -f "$additional_libdir/lib$name.$shlibext" \
+ || { test "$shlibext" = dll \
+ && test -f "$additional_libdir/lib$name.dll.a"; }; }; then
+ found_dir="$additional_libdir"
+ if test -f "$additional_libdir/lib$name.$shlibext"; then
+ found_so="$additional_libdir/lib$name.$shlibext"
+ else
+ found_so="$additional_libdir/lib$name.dll.a"
+ fi
+ if test -f "$additional_libdir/lib$name.la"; then
+ found_la="$additional_libdir/lib$name.la"
+ fi
+ else
+ if test -f "$additional_libdir/lib$name.$libext"; then
+ found_dir="$additional_libdir"
+ found_a="$additional_libdir/lib$name.$libext"
+ if test -f "$additional_libdir/lib$name.la"; then
+ found_la="$additional_libdir/lib$name.la"
+ fi
+ fi
+ fi
+ fi
+ if test "X$found_dir" = "X"; then
+ for x in $LDFLAGS $LTLIBINTL; do
+
+ acl_save_prefix="$prefix"
+ prefix="$acl_final_prefix"
+ acl_save_exec_prefix="$exec_prefix"
+ exec_prefix="$acl_final_exec_prefix"
+ eval x=\"$x\"
+ exec_prefix="$acl_save_exec_prefix"
+ prefix="$acl_save_prefix"
+
+ case "$x" in
+ -L*)
+ dir=`echo "X$x" | sed -e 's/^X-L//'`
+ if test -n "$shlibext" \
+ && { test -f "$dir/lib$name.$shlibext" \
+ || { test "$shlibext" = dll \
+ && test -f "$dir/lib$name.dll.a"; }; }; then
+ found_dir="$dir"
+ if test -f "$dir/lib$name.$shlibext"; then
+ found_so="$dir/lib$name.$shlibext"
+ else
+ found_so="$dir/lib$name.dll.a"
+ fi
+ if test -f "$dir/lib$name.la"; then
+ found_la="$dir/lib$name.la"
+ fi
+ else
+ if test -f "$dir/lib$name.$libext"; then
+ found_dir="$dir"
+ found_a="$dir/lib$name.$libext"
+ if test -f "$dir/lib$name.la"; then
+ found_la="$dir/lib$name.la"
+ fi
+ fi
+ fi
+ ;;
+ esac
+ if test "X$found_dir" != "X"; then
+ break
+ fi
+ done
+ fi
+ if test "X$found_dir" != "X"; then
+ LTLIBINTL="${LTLIBINTL}${LTLIBINTL:+ }-L$found_dir -l$name"
+ if test "X$found_so" != "X"; then
+ if test "$enable_rpath" = no || test "X$found_dir" = "X/usr/$acl_libdirstem"; then
+ LIBINTL="${LIBINTL}${LIBINTL:+ }$found_so"
+ else
+ haveit=
+ for x in $ltrpathdirs; do
+ if test "X$x" = "X$found_dir"; then
+ haveit=yes
+ break
+ fi
+ done
+ if test -z "$haveit"; then
+ ltrpathdirs="$ltrpathdirs $found_dir"
+ fi
+ if test "$hardcode_direct" = yes; then
+ LIBINTL="${LIBINTL}${LIBINTL:+ }$found_so"
+ else
+ if test -n "$hardcode_libdir_flag_spec" && test "$hardcode_minus_L" = no; then
+ LIBINTL="${LIBINTL}${LIBINTL:+ }$found_so"
+ haveit=
+ for x in $rpathdirs; do
+ if test "X$x" = "X$found_dir"; then
+ haveit=yes
+ break
+ fi
+ done
+ if test -z "$haveit"; then
+ rpathdirs="$rpathdirs $found_dir"
+ fi
+ else
+ haveit=
+ for x in $LDFLAGS $LIBINTL; do
+
+ acl_save_prefix="$prefix"
+ prefix="$acl_final_prefix"
+ acl_save_exec_prefix="$exec_prefix"
+ exec_prefix="$acl_final_exec_prefix"
+ eval x=\"$x\"
+ exec_prefix="$acl_save_exec_prefix"
+ prefix="$acl_save_prefix"
+
+ if test "X$x" = "X-L$found_dir"; then
+ haveit=yes
+ break
+ fi
+ done
+ if test -z "$haveit"; then
+ LIBINTL="${LIBINTL}${LIBINTL:+ }-L$found_dir"
+ fi
+ if test "$hardcode_minus_L" != no; then
+ LIBINTL="${LIBINTL}${LIBINTL:+ }$found_so"
+ else
+ LIBINTL="${LIBINTL}${LIBINTL:+ }-l$name"
+ fi
+ fi
+ fi
+ fi
+ else
+ if test "X$found_a" != "X"; then
+ LIBINTL="${LIBINTL}${LIBINTL:+ }$found_a"
+ else
+ LIBINTL="${LIBINTL}${LIBINTL:+ }-L$found_dir -l$name"
+ fi
+ fi
+ additional_includedir=
+ case "$found_dir" in
+ */$acl_libdirstem | */$acl_libdirstem/)
+ basedir=`echo "X$found_dir" | sed -e 's,^X,,' -e "s,/$acl_libdirstem/"'*$,,'`
+ additional_includedir="$basedir/include"
+ ;;
+ esac
+ if test "X$additional_includedir" != "X"; then
+ if test "X$additional_includedir" != "X/usr/include"; then
+ haveit=
+ if test "X$additional_includedir" = "X/usr/local/include"; then
+ if test -n "$GCC"; then
+ case $host_os in
+ linux* | gnu* | k*bsd*-gnu) haveit=yes;;
+ esac
+ fi
+ fi
+ if test -z "$haveit"; then
+ for x in $CPPFLAGS $INCINTL; do
+
+ acl_save_prefix="$prefix"
+ prefix="$acl_final_prefix"
+ acl_save_exec_prefix="$exec_prefix"
+ exec_prefix="$acl_final_exec_prefix"
+ eval x=\"$x\"
+ exec_prefix="$acl_save_exec_prefix"
+ prefix="$acl_save_prefix"
+
+ if test "X$x" = "X-I$additional_includedir"; then
+ haveit=yes
+ break
+ fi
+ done
+ if test -z "$haveit"; then
+ if test -d "$additional_includedir"; then
+ INCINTL="${INCINTL}${INCINTL:+ }-I$additional_includedir"
+ fi
+ fi
+ fi
+ fi
+ fi
+ if test -n "$found_la"; then
+ save_libdir="$libdir"
+ case "$found_la" in
+ */* | *\\*) . "$found_la" ;;
+ *) . "./$found_la" ;;
+ esac
+ libdir="$save_libdir"
+ for dep in $dependency_libs; do
+ case "$dep" in
+ -L*)
+ additional_libdir=`echo "X$dep" | sed -e 's/^X-L//'`
+ if test "X$additional_libdir" != "X/usr/$acl_libdirstem"; then
+ haveit=
+ if test "X$additional_libdir" = "X/usr/local/$acl_libdirstem"; then
+ if test -n "$GCC"; then
+ case $host_os in
+ linux* | gnu* | k*bsd*-gnu) haveit=yes;;
+ esac
+ fi
+ fi
+ if test -z "$haveit"; then
+ haveit=
+ for x in $LDFLAGS $LIBINTL; do
+
+ acl_save_prefix="$prefix"
+ prefix="$acl_final_prefix"
+ acl_save_exec_prefix="$exec_prefix"
+ exec_prefix="$acl_final_exec_prefix"
+ eval x=\"$x\"
+ exec_prefix="$acl_save_exec_prefix"
+ prefix="$acl_save_prefix"
+
+ if test "X$x" = "X-L$additional_libdir"; then
+ haveit=yes
+ break
+ fi
+ done
+ if test -z "$haveit"; then
+ if test -d "$additional_libdir"; then
+ LIBINTL="${LIBINTL}${LIBINTL:+ }-L$additional_libdir"
+ fi
+ fi
+ haveit=
+ for x in $LDFLAGS $LTLIBINTL; do
+
+ acl_save_prefix="$prefix"
+ prefix="$acl_final_prefix"
+ acl_save_exec_prefix="$exec_prefix"
+ exec_prefix="$acl_final_exec_prefix"
+ eval x=\"$x\"
+ exec_prefix="$acl_save_exec_prefix"
+ prefix="$acl_save_prefix"
+
+ if test "X$x" = "X-L$additional_libdir"; then
+ haveit=yes
+ break
+ fi
+ done
+ if test -z "$haveit"; then
+ if test -d "$additional_libdir"; then
+ LTLIBINTL="${LTLIBINTL}${LTLIBINTL:+ }-L$additional_libdir"
+ fi
+ fi
+ fi
+ fi
+ ;;
+ -R*)
+ dir=`echo "X$dep" | sed -e 's/^X-R//'`
+ if test "$enable_rpath" != no; then
+ haveit=
+ for x in $rpathdirs; do
+ if test "X$x" = "X$dir"; then
+ haveit=yes
+ break
+ fi
+ done
+ if test -z "$haveit"; then
+ rpathdirs="$rpathdirs $dir"
+ fi
+ haveit=
+ for x in $ltrpathdirs; do
+ if test "X$x" = "X$dir"; then
+ haveit=yes
+ break
+ fi
+ done
+ if test -z "$haveit"; then
+ ltrpathdirs="$ltrpathdirs $dir"
+ fi
+ fi
+ ;;
+ -l*)
+ names_next_round="$names_next_round "`echo "X$dep" | sed -e 's/^X-l//'`
+ ;;
+ *.la)
+ names_next_round="$names_next_round "`echo "X$dep" | sed -e 's,^X.*/,,' -e 's,^lib,,' -e 's,\.la$,,'`
+ ;;
+ *)
+ LIBINTL="${LIBINTL}${LIBINTL:+ }$dep"
+ LTLIBINTL="${LTLIBINTL}${LTLIBINTL:+ }$dep"
+ ;;
+ esac
+ done
+ fi
+ else
+ LIBINTL="${LIBINTL}${LIBINTL:+ }-l$name"
+ LTLIBINTL="${LTLIBINTL}${LTLIBINTL:+ }-l$name"
+ fi
+ fi
+ fi
+ done
+ done
+ if test "X$rpathdirs" != "X"; then
+ if test -n "$hardcode_libdir_separator"; then
+ alldirs=
+ for found_dir in $rpathdirs; do
+ alldirs="${alldirs}${alldirs:+$hardcode_libdir_separator}$found_dir"
+ done
+ acl_save_libdir="$libdir"
+ libdir="$alldirs"
+ eval flag=\"$hardcode_libdir_flag_spec\"
+ libdir="$acl_save_libdir"
+ LIBINTL="${LIBINTL}${LIBINTL:+ }$flag"
+ else
+ for found_dir in $rpathdirs; do
+ acl_save_libdir="$libdir"
+ libdir="$found_dir"
+ eval flag=\"$hardcode_libdir_flag_spec\"
+ libdir="$acl_save_libdir"
+ LIBINTL="${LIBINTL}${LIBINTL:+ }$flag"
+ done
+ fi
+ fi
+ if test "X$ltrpathdirs" != "X"; then
+ for found_dir in $ltrpathdirs; do
+ LTLIBINTL="${LTLIBINTL}${LTLIBINTL:+ }-R$found_dir"
+ done
+ fi
+
+ { $as_echo "$as_me:${as_lineno-$LINENO}: checking for GNU gettext in libintl" >&5
+$as_echo_n "checking for GNU gettext in libintl... " >&6; }
+if { as_var=$gt_func_gnugettext_libintl; eval "test \"\${$as_var+set}\" = set"; }; then :
+ $as_echo_n "(cached) " >&6
+else
+ gt_save_CPPFLAGS="$CPPFLAGS"
+ CPPFLAGS="$CPPFLAGS $INCINTL"
+ gt_save_LIBS="$LIBS"
+ LIBS="$LIBS $LIBINTL"
+ cat confdefs.h - <<_ACEOF >conftest.$ac_ext
+/* end confdefs.h. */
+#include <libintl.h>
+$gt_revision_test_code
+extern int _nl_msg_cat_cntr;
+extern
+#ifdef __cplusplus
+"C"
+#endif
+const char *_nl_expand_alias (const char *);
+int
+main ()
+{
+bindtextdomain ("", "");
+return * gettext ("")$gt_expression_test_code + _nl_msg_cat_cntr + *_nl_expand_alias ("")
+ ;
+ return 0;
+}
+_ACEOF
+if ac_fn_c_try_link "$LINENO"; then :
+ eval "$gt_func_gnugettext_libintl=yes"
+else
+ eval "$gt_func_gnugettext_libintl=no"
+fi
+rm -f core conftest.err conftest.$ac_objext \
+ conftest$ac_exeext conftest.$ac_ext
+ if { eval "gt_val=\$$gt_func_gnugettext_libintl"; test "$gt_val" != yes; } && test -n "$LIBICONV"; then
+ LIBS="$LIBS $LIBICONV"
+ cat confdefs.h - <<_ACEOF >conftest.$ac_ext
+/* end confdefs.h. */
+#include <libintl.h>
+$gt_revision_test_code
+extern int _nl_msg_cat_cntr;
+extern
+#ifdef __cplusplus
+"C"
+#endif
+const char *_nl_expand_alias (const char *);
+int
+main ()
+{
+bindtextdomain ("", "");
+return * gettext ("")$gt_expression_test_code + _nl_msg_cat_cntr + *_nl_expand_alias ("")
+ ;
+ return 0;
+}
+_ACEOF
+if ac_fn_c_try_link "$LINENO"; then :
+ LIBINTL="$LIBINTL $LIBICONV"
+ LTLIBINTL="$LTLIBINTL $LTLIBICONV"
+ eval "$gt_func_gnugettext_libintl=yes"
+
+fi
+rm -f core conftest.err conftest.$ac_objext \
+ conftest$ac_exeext conftest.$ac_ext
+ fi
+ CPPFLAGS="$gt_save_CPPFLAGS"
+ LIBS="$gt_save_LIBS"
+fi
+eval ac_res=\$$gt_func_gnugettext_libintl
+ { $as_echo "$as_me:${as_lineno-$LINENO}: result: $ac_res" >&5
+$as_echo "$ac_res" >&6; }
+ fi
+
+ if { eval "gt_val=\$$gt_func_gnugettext_libc"; test "$gt_val" = "yes"; } \
+ || { { eval "gt_val=\$$gt_func_gnugettext_libintl"; test "$gt_val" = "yes"; } \
+ && test "$PACKAGE" != gettext-runtime \
+ && test "$PACKAGE" != gettext-tools; }; then
+ gt_use_preinstalled_gnugettext=yes
+ else
+ LIBINTL=
+ LTLIBINTL=
+ INCINTL=
+ fi
+
+
+
+ if test -n "$INTL_MACOSX_LIBS"; then
+ if test "$gt_use_preinstalled_gnugettext" = "yes" \
+ || test "$nls_cv_use_gnu_gettext" = "yes"; then
+ LIBINTL="$LIBINTL $INTL_MACOSX_LIBS"
+ LTLIBINTL="$LTLIBINTL $INTL_MACOSX_LIBS"
+ fi
+ fi
+
+ if test "$gt_use_preinstalled_gnugettext" = "yes" \
+ || test "$nls_cv_use_gnu_gettext" = "yes"; then
+
+$as_echo "#define ENABLE_NLS 1" >>confdefs.h
+
+ else
+ USE_NLS=no
+ fi
+ fi
+
+ { $as_echo "$as_me:${as_lineno-$LINENO}: checking whether to use NLS" >&5
+$as_echo_n "checking whether to use NLS... " >&6; }
+ { $as_echo "$as_me:${as_lineno-$LINENO}: result: $USE_NLS" >&5
+$as_echo "$USE_NLS" >&6; }
+ if test "$USE_NLS" = "yes"; then
+ { $as_echo "$as_me:${as_lineno-$LINENO}: checking where the gettext function comes from" >&5
+$as_echo_n "checking where the gettext function comes from... " >&6; }
+ if test "$gt_use_preinstalled_gnugettext" = "yes"; then
+ if { eval "gt_val=\$$gt_func_gnugettext_libintl"; test "$gt_val" = "yes"; }; then
+ gt_source="external libintl"
+ else
+ gt_source="libc"
+ fi
+ else
+ gt_source="included intl directory"
+ fi
+ { $as_echo "$as_me:${as_lineno-$LINENO}: result: $gt_source" >&5
+$as_echo "$gt_source" >&6; }
+ fi
+
+ if test "$USE_NLS" = "yes"; then
+
+ if test "$gt_use_preinstalled_gnugettext" = "yes"; then
+ if { eval "gt_val=\$$gt_func_gnugettext_libintl"; test "$gt_val" = "yes"; }; then
+ { $as_echo "$as_me:${as_lineno-$LINENO}: checking how to link with libintl" >&5
+$as_echo_n "checking how to link with libintl... " >&6; }
+ { $as_echo "$as_me:${as_lineno-$LINENO}: result: $LIBINTL" >&5
+$as_echo "$LIBINTL" >&6; }
+
+ for element in $INCINTL; do
+ haveit=
+ for x in $CPPFLAGS; do
+
+ acl_save_prefix="$prefix"
+ prefix="$acl_final_prefix"
+ acl_save_exec_prefix="$exec_prefix"
+ exec_prefix="$acl_final_exec_prefix"
+ eval x=\"$x\"
+ exec_prefix="$acl_save_exec_prefix"
+ prefix="$acl_save_prefix"
+
+ if test "X$x" = "X$element"; then
+ haveit=yes
+ break
+ fi
+ done
+ if test -z "$haveit"; then
+ CPPFLAGS="${CPPFLAGS}${CPPFLAGS:+ }$element"
+ fi
+ done
+
+ fi
+
+
+$as_echo "#define HAVE_GETTEXT 1" >>confdefs.h
+
+
+$as_echo "#define HAVE_DCGETTEXT 1" >>confdefs.h
+
+ fi
+
+ POSUB=po
+ fi
+
+
+
+ INTLLIBS="$LIBINTL"
+
+
+
+
+
+
+
+###############################################################################
+# Checks for header files.
+###############################################################################
+
+echo
+echo "System headers and functions:"
+
+# There is currently no workarounds in this package if some of
+# these headers are missing.
+for ac_header in fcntl.h limits.h sys/time.h
+do :
+ as_ac_Header=`$as_echo "ac_cv_header_$ac_header" | $as_tr_sh`
+ac_fn_c_check_header_mongrel "$LINENO" "$ac_header" "$as_ac_Header" "$ac_includes_default"
+eval as_val=\$$as_ac_Header
+ if test "x$as_val" = x""yes; then :
+ cat >>confdefs.h <<_ACEOF
+#define `$as_echo "HAVE_$ac_header" | $as_tr_cpp` 1
+_ACEOF
+
+else
+ as_fn_error "Required header file(s) are missing." "$LINENO" 5
+fi
+
+done
+
+
+# If any of these headers are missing, things should still work correctly:
+for ac_header in sys/param.h sys/sysctl.h byteswap.h
+do :
+ as_ac_Header=`$as_echo "ac_cv_header_$ac_header" | $as_tr_sh`
+ac_fn_c_check_header_compile "$LINENO" "$ac_header" "$as_ac_Header" "
+#ifdef HAVE_SYS_PARAM_H
+# include <sys/param.h>
+#endif
+
+"
+eval as_val=\$$as_ac_Header
+ if test "x$as_val" = x""yes; then :
+ cat >>confdefs.h <<_ACEOF
+#define `$as_echo "HAVE_$ac_header" | $as_tr_cpp` 1
+_ACEOF
+
+fi
+
+done
+
+
+# Even if we have byteswap.h, we may lack the specific macros/functions.
+if test x$ac_cv_header_byteswap_h = xyes ; then
+
+ { $as_echo "$as_me:${as_lineno-$LINENO}: checking if bswap_16 is available" >&5
+$as_echo_n "checking if bswap_16 is available... " >&6; }
+ cat confdefs.h - <<_ACEOF >conftest.$ac_ext
+/* end confdefs.h. */
+
+#include <byteswap.h>
+int
+main(void)
+{
+ bswap_16(42);
+ return 0;
+}
+
+_ACEOF
+if ac_fn_c_try_link "$LINENO"; then :
+
+
+$as_echo "#define HAVE_BSWAP_16 1" >>confdefs.h
+
+ { $as_echo "$as_me:${as_lineno-$LINENO}: result: yes" >&5
+$as_echo "yes" >&6; }
+
+else
+ { $as_echo "$as_me:${as_lineno-$LINENO}: result: no" >&5
+$as_echo "no" >&6; }
+fi
+rm -f core conftest.err conftest.$ac_objext \
+ conftest$ac_exeext conftest.$ac_ext
+
+
+ { $as_echo "$as_me:${as_lineno-$LINENO}: checking if bswap_32 is available" >&5
+$as_echo_n "checking if bswap_32 is available... " >&6; }
+ cat confdefs.h - <<_ACEOF >conftest.$ac_ext
+/* end confdefs.h. */
+
+#include <byteswap.h>
+int
+main(void)
+{
+ bswap_32(42);
+ return 0;
+}
+
+_ACEOF
+if ac_fn_c_try_link "$LINENO"; then :
+
+
+$as_echo "#define HAVE_BSWAP_32 1" >>confdefs.h
+
+ { $as_echo "$as_me:${as_lineno-$LINENO}: result: yes" >&5
+$as_echo "yes" >&6; }
+
+else
+ { $as_echo "$as_me:${as_lineno-$LINENO}: result: no" >&5
+$as_echo "no" >&6; }
+fi
+rm -f core conftest.err conftest.$ac_objext \
+ conftest$ac_exeext conftest.$ac_ext
+
+
+ { $as_echo "$as_me:${as_lineno-$LINENO}: checking if bswap_64 is available" >&5
+$as_echo_n "checking if bswap_64 is available... " >&6; }
+ cat confdefs.h - <<_ACEOF >conftest.$ac_ext
+/* end confdefs.h. */
+
+#include <byteswap.h>
+int
+main(void)
+{
+ bswap_64(42);
+ return 0;
+}
+
+_ACEOF
+if ac_fn_c_try_link "$LINENO"; then :
+
+
+$as_echo "#define HAVE_BSWAP_64 1" >>confdefs.h
+
+ { $as_echo "$as_me:${as_lineno-$LINENO}: result: yes" >&5
+$as_echo "yes" >&6; }
+
+else
+ { $as_echo "$as_me:${as_lineno-$LINENO}: result: no" >&5
+$as_echo "no" >&6; }
+fi
+rm -f core conftest.err conftest.$ac_objext \
+ conftest$ac_exeext conftest.$ac_ext
+
+ fi
+
+
+###############################################################################
+# Checks for typedefs, structures, and compiler characteristics.
+###############################################################################
+
+
+{ $as_echo "$as_me:${as_lineno-$LINENO}: checking for stdbool.h that conforms to C99" >&5
+$as_echo_n "checking for stdbool.h that conforms to C99... " >&6; }
+if test "${ac_cv_header_stdbool_h+set}" = set; then :
+ $as_echo_n "(cached) " >&6
+else
+ cat confdefs.h - <<_ACEOF >conftest.$ac_ext
+/* end confdefs.h. */
+
+#include <stdbool.h>
+#ifndef bool
+ "error: bool is not defined"
+#endif
+#ifndef false
+ "error: false is not defined"
+#endif
+#if false
+ "error: false is not 0"
+#endif
+#ifndef true
+ "error: true is not defined"
+#endif
+#if true != 1
+ "error: true is not 1"
+#endif
+#ifndef __bool_true_false_are_defined
+ "error: __bool_true_false_are_defined is not defined"
+#endif
+
+ struct s { _Bool s: 1; _Bool t; } s;
+
+ char a[true == 1 ? 1 : -1];
+ char b[false == 0 ? 1 : -1];
+ char c[__bool_true_false_are_defined == 1 ? 1 : -1];
+ char d[(bool) 0.5 == true ? 1 : -1];
+ bool e = &s;
+ char f[(_Bool) 0.0 == false ? 1 : -1];
+ char g[true];
+ char h[sizeof (_Bool)];
+ char i[sizeof s.t];
+ enum { j = false, k = true, l = false * true, m = true * 256 };
+ /* The following fails for
+ HP aC++/ANSI C B3910B A.05.55 [Dec 04 2003]. */
+ _Bool n[m];
+ char o[sizeof n == m * sizeof n[0] ? 1 : -1];
+ char p[-1 - (_Bool) 0 < 0 && -1 - (bool) 0 < 0 ? 1 : -1];
+# if defined __xlc__ || defined __GNUC__
+ /* Catch a bug in IBM AIX xlc compiler version 6.0.0.0
+ reported by James Lemley on 2005-10-05; see
+ http://lists.gnu.org/archive/html/bug-coreutils/2005-10/msg00086.html
+ This test is not quite right, since xlc is allowed to
+ reject this program, as the initializer for xlcbug is
+ not one of the forms that C requires support for.
+ However, doing the test right would require a runtime
+ test, and that would make cross-compilation harder.
+ Let us hope that IBM fixes the xlc bug, and also adds
+ support for this kind of constant expression. In the
+ meantime, this test will reject xlc, which is OK, since
+ our stdbool.h substitute should suffice. We also test
+ this with GCC, where it should work, to detect more
+ quickly whether someone messes up the test in the
+ future. */
+ char digs[] = "0123456789";
+ int xlcbug = 1 / (&(digs + 5)[-2 + (bool) 1] == &digs[4] ? 1 : -1);
+# endif
+ /* Catch a bug in an HP-UX C compiler. See
+ http://gcc.gnu.org/ml/gcc-patches/2003-12/msg02303.html
+ http://lists.gnu.org/archive/html/bug-coreutils/2005-11/msg00161.html
+ */
+ _Bool q = true;
+ _Bool *pq = &q;
+
+int
+main ()
+{
+
+ *pq |= q;
+ *pq |= ! q;
+ /* Refer to every declared value, to avoid compiler optimizations. */
+ return (!a + !b + !c + !d + !e + !f + !g + !h + !i + !!j + !k + !!l
+ + !m + !n + !o + !p + !q + !pq);
+
+ ;
+ return 0;
+}
+_ACEOF
+if ac_fn_c_try_compile "$LINENO"; then :
+ ac_cv_header_stdbool_h=yes
+else
+ ac_cv_header_stdbool_h=no
+fi
+rm -f core conftest.err conftest.$ac_objext conftest.$ac_ext
+fi
+{ $as_echo "$as_me:${as_lineno-$LINENO}: result: $ac_cv_header_stdbool_h" >&5
+$as_echo "$ac_cv_header_stdbool_h" >&6; }
+ac_fn_c_check_type "$LINENO" "_Bool" "ac_cv_type__Bool" "$ac_includes_default"
+if test "x$ac_cv_type__Bool" = x""yes; then :
+
+cat >>confdefs.h <<_ACEOF
+#define HAVE__BOOL 1
+_ACEOF
+
+
+fi
+
+if test $ac_cv_header_stdbool_h = yes; then
+
+$as_echo "#define HAVE_STDBOOL_H 1" >>confdefs.h
+
+fi
+
+
+ac_fn_c_find_uintX_t "$LINENO" "8" "ac_cv_c_uint8_t"
+case $ac_cv_c_uint8_t in #(
+ no|yes) ;; #(
+ *)
+
+$as_echo "#define _UINT8_T 1" >>confdefs.h
+
+
+cat >>confdefs.h <<_ACEOF
+#define uint8_t $ac_cv_c_uint8_t
+_ACEOF
+;;
+ esac
+
+ac_fn_c_find_uintX_t "$LINENO" "16" "ac_cv_c_uint16_t"
+case $ac_cv_c_uint16_t in #(
+ no|yes) ;; #(
+ *)
+
+
+cat >>confdefs.h <<_ACEOF
+#define uint16_t $ac_cv_c_uint16_t
+_ACEOF
+;;
+ esac
+
+ac_fn_c_find_intX_t "$LINENO" "32" "ac_cv_c_int32_t"
+case $ac_cv_c_int32_t in #(
+ no|yes) ;; #(
+ *)
+
+cat >>confdefs.h <<_ACEOF
+#define int32_t $ac_cv_c_int32_t
+_ACEOF
+;;
+esac
+
+ac_fn_c_find_uintX_t "$LINENO" "32" "ac_cv_c_uint32_t"
+case $ac_cv_c_uint32_t in #(
+ no|yes) ;; #(
+ *)
+
+$as_echo "#define _UINT32_T 1" >>confdefs.h
+
+
+cat >>confdefs.h <<_ACEOF
+#define uint32_t $ac_cv_c_uint32_t
+_ACEOF
+;;
+ esac
+
+ac_fn_c_find_intX_t "$LINENO" "64" "ac_cv_c_int64_t"
+case $ac_cv_c_int64_t in #(
+ no|yes) ;; #(
+ *)
+
+cat >>confdefs.h <<_ACEOF
+#define int64_t $ac_cv_c_int64_t
+_ACEOF
+;;
+esac
+
+ac_fn_c_find_uintX_t "$LINENO" "64" "ac_cv_c_uint64_t"
+case $ac_cv_c_uint64_t in #(
+ no|yes) ;; #(
+ *)
+
+$as_echo "#define _UINT64_T 1" >>confdefs.h
+
+
+cat >>confdefs.h <<_ACEOF
+#define uint64_t $ac_cv_c_uint64_t
+_ACEOF
+;;
+ esac
+
+
+ ac_fn_c_check_type "$LINENO" "uintptr_t" "ac_cv_type_uintptr_t" "$ac_includes_default"
+if test "x$ac_cv_type_uintptr_t" = x""yes; then :
+
+$as_echo "#define HAVE_UINTPTR_T 1" >>confdefs.h
+
+else
+ for ac_type in 'unsigned int' 'unsigned long int' \
+ 'unsigned long long int'; do
+ cat confdefs.h - <<_ACEOF >conftest.$ac_ext
+/* end confdefs.h. */
+$ac_includes_default
+int
+main ()
+{
+static int test_array [1 - 2 * !(sizeof (void *) <= sizeof ($ac_type))];
+test_array [0] = 0
+
+ ;
+ return 0;
+}
+_ACEOF
+if ac_fn_c_try_compile "$LINENO"; then :
+
+cat >>confdefs.h <<_ACEOF
+#define uintptr_t $ac_type
+_ACEOF
+
+ ac_type=
+fi
+rm -f core conftest.err conftest.$ac_objext conftest.$ac_ext
+ test -z "$ac_type" && break
+ done
+fi
+
+
+
+# The cast to long int works around a bug in the HP C Compiler
+# version HP92453-01 B.11.11.23709.GP, which incorrectly rejects
+# declarations like `int a3[[(sizeof (unsigned char)) >= 0]];'.
+# This bug is HP SR number 8606223364.
+{ $as_echo "$as_me:${as_lineno-$LINENO}: checking size of size_t" >&5
+$as_echo_n "checking size of size_t... " >&6; }
+if test "${ac_cv_sizeof_size_t+set}" = set; then :
+ $as_echo_n "(cached) " >&6
+else
+ if ac_fn_c_compute_int "$LINENO" "(long int) (sizeof (size_t))" "ac_cv_sizeof_size_t" "$ac_includes_default"; then :
+
+else
+ if test "$ac_cv_type_size_t" = yes; then
+ { { $as_echo "$as_me:${as_lineno-$LINENO}: error: in \`$ac_pwd':" >&5
+$as_echo "$as_me: error: in \`$ac_pwd':" >&2;}
+{ as_fn_set_status 77
+as_fn_error "cannot compute sizeof (size_t)
+See \`config.log' for more details." "$LINENO" 5; }; }
+ else
+ ac_cv_sizeof_size_t=0
+ fi
+fi
+
+fi
+{ $as_echo "$as_me:${as_lineno-$LINENO}: result: $ac_cv_sizeof_size_t" >&5
+$as_echo "$ac_cv_sizeof_size_t" >&6; }
+
+
+
+cat >>confdefs.h <<_ACEOF
+#define SIZEOF_SIZE_T $ac_cv_sizeof_size_t
+_ACEOF
+
+
+
+# The command line tool can copy high resolution timestamps if such
+# information is availabe in struct stat. Otherwise one second accuracy
+# is used.
+ac_fn_c_check_member "$LINENO" "struct stat" "st_atim.tv_nsec" "ac_cv_member_struct_stat_st_atim_tv_nsec" "$ac_includes_default"
+if test "x$ac_cv_member_struct_stat_st_atim_tv_nsec" = x""yes; then :
+
+cat >>confdefs.h <<_ACEOF
+#define HAVE_STRUCT_STAT_ST_ATIM_TV_NSEC 1
+_ACEOF
+
+
+fi
+ac_fn_c_check_member "$LINENO" "struct stat" "st_atimespec.tv_nsec" "ac_cv_member_struct_stat_st_atimespec_tv_nsec" "$ac_includes_default"
+if test "x$ac_cv_member_struct_stat_st_atimespec_tv_nsec" = x""yes; then :
+
+cat >>confdefs.h <<_ACEOF
+#define HAVE_STRUCT_STAT_ST_ATIMESPEC_TV_NSEC 1
+_ACEOF
+
+
+fi
+ac_fn_c_check_member "$LINENO" "struct stat" "st_atimensec" "ac_cv_member_struct_stat_st_atimensec" "$ac_includes_default"
+if test "x$ac_cv_member_struct_stat_st_atimensec" = x""yes; then :
+
+cat >>confdefs.h <<_ACEOF
+#define HAVE_STRUCT_STAT_ST_ATIMENSEC 1
+_ACEOF
+
+
+fi
+ac_fn_c_check_member "$LINENO" "struct stat" "st_uatime" "ac_cv_member_struct_stat_st_uatime" "$ac_includes_default"
+if test "x$ac_cv_member_struct_stat_st_uatime" = x""yes; then :
+
+cat >>confdefs.h <<_ACEOF
+#define HAVE_STRUCT_STAT_ST_UATIME 1
+_ACEOF
+
+
+fi
+ac_fn_c_check_member "$LINENO" "struct stat" "st_atim.st__tim.tv_nsec" "ac_cv_member_struct_stat_st_atim_st__tim_tv_nsec" "$ac_includes_default"
+if test "x$ac_cv_member_struct_stat_st_atim_st__tim_tv_nsec" = x""yes; then :
+
+cat >>confdefs.h <<_ACEOF
+#define HAVE_STRUCT_STAT_ST_ATIM_ST__TIM_TV_NSEC 1
+_ACEOF
+
+
+fi
+
+
+# Check whether --enable-largefile was given.
+if test "${enable_largefile+set}" = set; then :
+ enableval=$enable_largefile;
+fi
+
+if test "$enable_largefile" != no; then
+
+ { $as_echo "$as_me:${as_lineno-$LINENO}: checking for special C compiler options needed for large files" >&5
+$as_echo_n "checking for special C compiler options needed for large files... " >&6; }
+if test "${ac_cv_sys_largefile_CC+set}" = set; then :
+ $as_echo_n "(cached) " >&6
+else
+ ac_cv_sys_largefile_CC=no
+ if test "$GCC" != yes; then
+ ac_save_CC=$CC
+ while :; do
+ # IRIX 6.2 and later do not support large files by default,
+ # so use the C compiler's -n32 option if that helps.
+ cat confdefs.h - <<_ACEOF >conftest.$ac_ext
+/* end confdefs.h. */
+#include <sys/types.h>
+ /* Check that off_t can represent 2**63 - 1 correctly.
+ We can't simply define LARGE_OFF_T to be 9223372036854775807,
+ since some C++ compilers masquerading as C compilers
+ incorrectly reject 9223372036854775807. */
+#define LARGE_OFF_T (((off_t) 1 << 62) - 1 + ((off_t) 1 << 62))
+ int off_t_is_large[(LARGE_OFF_T % 2147483629 == 721
+ && LARGE_OFF_T % 2147483647 == 1)
+ ? 1 : -1];
+int
+main ()
+{
+
+ ;
+ return 0;
+}
+_ACEOF
+ if ac_fn_c_try_compile "$LINENO"; then :
+ break
+fi
+rm -f core conftest.err conftest.$ac_objext
+ CC="$CC -n32"
+ if ac_fn_c_try_compile "$LINENO"; then :
+ ac_cv_sys_largefile_CC=' -n32'; break
+fi
+rm -f core conftest.err conftest.$ac_objext
+ break
+ done
+ CC=$ac_save_CC
+ rm -f conftest.$ac_ext
+ fi
+fi
+{ $as_echo "$as_me:${as_lineno-$LINENO}: result: $ac_cv_sys_largefile_CC" >&5
+$as_echo "$ac_cv_sys_largefile_CC" >&6; }
+ if test "$ac_cv_sys_largefile_CC" != no; then
+ CC=$CC$ac_cv_sys_largefile_CC
+ fi
+
+ { $as_echo "$as_me:${as_lineno-$LINENO}: checking for _FILE_OFFSET_BITS value needed for large files" >&5
+$as_echo_n "checking for _FILE_OFFSET_BITS value needed for large files... " >&6; }
+if test "${ac_cv_sys_file_offset_bits+set}" = set; then :
+ $as_echo_n "(cached) " >&6
+else
+ while :; do
+ cat confdefs.h - <<_ACEOF >conftest.$ac_ext
+/* end confdefs.h. */
+#include <sys/types.h>
+ /* Check that off_t can represent 2**63 - 1 correctly.
+ We can't simply define LARGE_OFF_T to be 9223372036854775807,
+ since some C++ compilers masquerading as C compilers
+ incorrectly reject 9223372036854775807. */
+#define LARGE_OFF_T (((off_t) 1 << 62) - 1 + ((off_t) 1 << 62))
+ int off_t_is_large[(LARGE_OFF_T % 2147483629 == 721
+ && LARGE_OFF_T % 2147483647 == 1)
+ ? 1 : -1];
+int
+main ()
+{
+
+ ;
+ return 0;
+}
+_ACEOF
+if ac_fn_c_try_compile "$LINENO"; then :
+ ac_cv_sys_file_offset_bits=no; break
+fi
+rm -f core conftest.err conftest.$ac_objext conftest.$ac_ext
+ cat confdefs.h - <<_ACEOF >conftest.$ac_ext
+/* end confdefs.h. */
+#define _FILE_OFFSET_BITS 64
+#include <sys/types.h>
+ /* Check that off_t can represent 2**63 - 1 correctly.
+ We can't simply define LARGE_OFF_T to be 9223372036854775807,
+ since some C++ compilers masquerading as C compilers
+ incorrectly reject 9223372036854775807. */
+#define LARGE_OFF_T (((off_t) 1 << 62) - 1 + ((off_t) 1 << 62))
+ int off_t_is_large[(LARGE_OFF_T % 2147483629 == 721
+ && LARGE_OFF_T % 2147483647 == 1)
+ ? 1 : -1];
+int
+main ()
+{
+
+ ;
+ return 0;
+}
+_ACEOF
+if ac_fn_c_try_compile "$LINENO"; then :
+ ac_cv_sys_file_offset_bits=64; break
+fi
+rm -f core conftest.err conftest.$ac_objext conftest.$ac_ext
+ ac_cv_sys_file_offset_bits=unknown
+ break
+done
+fi
+{ $as_echo "$as_me:${as_lineno-$LINENO}: result: $ac_cv_sys_file_offset_bits" >&5
+$as_echo "$ac_cv_sys_file_offset_bits" >&6; }
+case $ac_cv_sys_file_offset_bits in #(
+ no | unknown) ;;
+ *)
+cat >>confdefs.h <<_ACEOF
+#define _FILE_OFFSET_BITS $ac_cv_sys_file_offset_bits
+_ACEOF
+;;
+esac
+rm -rf conftest*
+ if test $ac_cv_sys_file_offset_bits = unknown; then
+ { $as_echo "$as_me:${as_lineno-$LINENO}: checking for _LARGE_FILES value needed for large files" >&5
+$as_echo_n "checking for _LARGE_FILES value needed for large files... " >&6; }
+if test "${ac_cv_sys_large_files+set}" = set; then :
+ $as_echo_n "(cached) " >&6
+else
+ while :; do
+ cat confdefs.h - <<_ACEOF >conftest.$ac_ext
+/* end confdefs.h. */
+#include <sys/types.h>
+ /* Check that off_t can represent 2**63 - 1 correctly.
+ We can't simply define LARGE_OFF_T to be 9223372036854775807,
+ since some C++ compilers masquerading as C compilers
+ incorrectly reject 9223372036854775807. */
+#define LARGE_OFF_T (((off_t) 1 << 62) - 1 + ((off_t) 1 << 62))
+ int off_t_is_large[(LARGE_OFF_T % 2147483629 == 721
+ && LARGE_OFF_T % 2147483647 == 1)
+ ? 1 : -1];
+int
+main ()
+{
+
+ ;
+ return 0;
+}
+_ACEOF
+if ac_fn_c_try_compile "$LINENO"; then :
+ ac_cv_sys_large_files=no; break
+fi
+rm -f core conftest.err conftest.$ac_objext conftest.$ac_ext
+ cat confdefs.h - <<_ACEOF >conftest.$ac_ext
+/* end confdefs.h. */
+#define _LARGE_FILES 1
+#include <sys/types.h>
+ /* Check that off_t can represent 2**63 - 1 correctly.
+ We can't simply define LARGE_OFF_T to be 9223372036854775807,
+ since some C++ compilers masquerading as C compilers
+ incorrectly reject 9223372036854775807. */
+#define LARGE_OFF_T (((off_t) 1 << 62) - 1 + ((off_t) 1 << 62))
+ int off_t_is_large[(LARGE_OFF_T % 2147483629 == 721
+ && LARGE_OFF_T % 2147483647 == 1)
+ ? 1 : -1];
+int
+main ()
+{
+
+ ;
+ return 0;
+}
+_ACEOF
+if ac_fn_c_try_compile "$LINENO"; then :
+ ac_cv_sys_large_files=1; break
+fi
+rm -f core conftest.err conftest.$ac_objext conftest.$ac_ext
+ ac_cv_sys_large_files=unknown
+ break
+done
+fi
+{ $as_echo "$as_me:${as_lineno-$LINENO}: result: $ac_cv_sys_large_files" >&5
+$as_echo "$ac_cv_sys_large_files" >&6; }
+case $ac_cv_sys_large_files in #(
+ no | unknown) ;;
+ *)
+cat >>confdefs.h <<_ACEOF
+#define _LARGE_FILES $ac_cv_sys_large_files
+_ACEOF
+;;
+esac
+rm -rf conftest*
+ fi
+fi
+
+ { $as_echo "$as_me:${as_lineno-$LINENO}: checking whether byte ordering is bigendian" >&5
+$as_echo_n "checking whether byte ordering is bigendian... " >&6; }
+if test "${ac_cv_c_bigendian+set}" = set; then :
+ $as_echo_n "(cached) " >&6
+else
+ ac_cv_c_bigendian=unknown
+ # See if we're dealing with a universal compiler.
+ cat confdefs.h - <<_ACEOF >conftest.$ac_ext
+/* end confdefs.h. */
+#ifndef __APPLE_CC__
+ not a universal capable compiler
+ #endif
+ typedef int dummy;
+
+_ACEOF
+if ac_fn_c_try_compile "$LINENO"; then :
+
+ # Check for potential -arch flags. It is not universal unless
+ # there are at least two -arch flags with different values.
+ ac_arch=
+ ac_prev=
+ for ac_word in $CC $CFLAGS $CPPFLAGS $LDFLAGS; do
+ if test -n "$ac_prev"; then
+ case $ac_word in
+ i?86 | x86_64 | ppc | ppc64)
+ if test -z "$ac_arch" || test "$ac_arch" = "$ac_word"; then
+ ac_arch=$ac_word
+ else
+ ac_cv_c_bigendian=universal
+ break
+ fi
+ ;;
+ esac
+ ac_prev=
+ elif test "x$ac_word" = "x-arch"; then
+ ac_prev=arch
+ fi
+ done
+fi
+rm -f core conftest.err conftest.$ac_objext conftest.$ac_ext
+ if test $ac_cv_c_bigendian = unknown; then
+ # See if sys/param.h defines the BYTE_ORDER macro.
+ cat confdefs.h - <<_ACEOF >conftest.$ac_ext
+/* end confdefs.h. */
+#include <sys/types.h>
+ #include <sys/param.h>
+
+int
+main ()
+{
+#if ! (defined BYTE_ORDER && defined BIG_ENDIAN \
+ && defined LITTLE_ENDIAN && BYTE_ORDER && BIG_ENDIAN \
+ && LITTLE_ENDIAN)
+ bogus endian macros
+ #endif
+
+ ;
+ return 0;
+}
+_ACEOF
+if ac_fn_c_try_compile "$LINENO"; then :
+ # It does; now see whether it defined to BIG_ENDIAN or not.
+ cat confdefs.h - <<_ACEOF >conftest.$ac_ext
+/* end confdefs.h. */
+#include <sys/types.h>
+ #include <sys/param.h>
+
+int
+main ()
+{
+#if BYTE_ORDER != BIG_ENDIAN
+ not big endian
+ #endif
+
+ ;
+ return 0;
+}
+_ACEOF
+if ac_fn_c_try_compile "$LINENO"; then :
+ ac_cv_c_bigendian=yes
+else
+ ac_cv_c_bigendian=no
+fi
+rm -f core conftest.err conftest.$ac_objext conftest.$ac_ext
+fi
+rm -f core conftest.err conftest.$ac_objext conftest.$ac_ext
+ fi
+ if test $ac_cv_c_bigendian = unknown; then
+ # See if <limits.h> defines _LITTLE_ENDIAN or _BIG_ENDIAN (e.g., Solaris).
+ cat confdefs.h - <<_ACEOF >conftest.$ac_ext
+/* end confdefs.h. */
+#include <limits.h>
+
+int
+main ()
+{
+#if ! (defined _LITTLE_ENDIAN || defined _BIG_ENDIAN)
+ bogus endian macros
+ #endif
+
+ ;
+ return 0;
+}
+_ACEOF
+if ac_fn_c_try_compile "$LINENO"; then :
+ # It does; now see whether it defined to _BIG_ENDIAN or not.
+ cat confdefs.h - <<_ACEOF >conftest.$ac_ext
+/* end confdefs.h. */
+#include <limits.h>
+
+int
+main ()
+{
+#ifndef _BIG_ENDIAN
+ not big endian
+ #endif
+
+ ;
+ return 0;
+}
+_ACEOF
+if ac_fn_c_try_compile "$LINENO"; then :
+ ac_cv_c_bigendian=yes
+else
+ ac_cv_c_bigendian=no
+fi
+rm -f core conftest.err conftest.$ac_objext conftest.$ac_ext
+fi
+rm -f core conftest.err conftest.$ac_objext conftest.$ac_ext
+ fi
+ if test $ac_cv_c_bigendian = unknown; then
+ # Compile a test program.
+ if test "$cross_compiling" = yes; then :
+ # Try to guess by grepping values from an object file.
+ cat confdefs.h - <<_ACEOF >conftest.$ac_ext
+/* end confdefs.h. */
+short int ascii_mm[] =
+ { 0x4249, 0x4765, 0x6E44, 0x6961, 0x6E53, 0x7953, 0 };
+ short int ascii_ii[] =
+ { 0x694C, 0x5454, 0x656C, 0x6E45, 0x6944, 0x6E61, 0 };
+ int use_ascii (int i) {
+ return ascii_mm[i] + ascii_ii[i];
+ }
+ short int ebcdic_ii[] =
+ { 0x89D3, 0xE3E3, 0x8593, 0x95C5, 0x89C4, 0x9581, 0 };
+ short int ebcdic_mm[] =
+ { 0xC2C9, 0xC785, 0x95C4, 0x8981, 0x95E2, 0xA8E2, 0 };
+ int use_ebcdic (int i) {
+ return ebcdic_mm[i] + ebcdic_ii[i];
+ }
+ extern int foo;
+
+int
+main ()
+{
+return use_ascii (foo) == use_ebcdic (foo);
+ ;
+ return 0;
+}
+_ACEOF
+if ac_fn_c_try_compile "$LINENO"; then :
+ if grep BIGenDianSyS conftest.$ac_objext >/dev/null; then
+ ac_cv_c_bigendian=yes
+ fi
+ if grep LiTTleEnDian conftest.$ac_objext >/dev/null ; then
+ if test "$ac_cv_c_bigendian" = unknown; then
+ ac_cv_c_bigendian=no
+ else
+ # finding both strings is unlikely to happen, but who knows?
+ ac_cv_c_bigendian=unknown
+ fi
+ fi
+fi
+rm -f core conftest.err conftest.$ac_objext conftest.$ac_ext
+else
+ cat confdefs.h - <<_ACEOF >conftest.$ac_ext
+/* end confdefs.h. */
+$ac_includes_default
+int
+main ()
+{
+
+ /* Are we little or big endian? From Harbison&Steele. */
+ union
+ {
+ long int l;
+ char c[sizeof (long int)];
+ } u;
+ u.l = 1;
+ return u.c[sizeof (long int) - 1] == 1;
+
+ ;
+ return 0;
+}
+_ACEOF
+if ac_fn_c_try_run "$LINENO"; then :
+ ac_cv_c_bigendian=no
+else
+ ac_cv_c_bigendian=yes
+fi
+rm -f core *.core core.conftest.* gmon.out bb.out conftest$ac_exeext \
+ conftest.$ac_objext conftest.beam conftest.$ac_ext
+fi
+
+ fi
+fi
+{ $as_echo "$as_me:${as_lineno-$LINENO}: result: $ac_cv_c_bigendian" >&5
+$as_echo "$ac_cv_c_bigendian" >&6; }
+ case $ac_cv_c_bigendian in #(
+ yes)
+ $as_echo "#define WORDS_BIGENDIAN 1" >>confdefs.h
+;; #(
+ no)
+ ;; #(
+ universal)
+
+$as_echo "#define AC_APPLE_UNIVERSAL_BUILD 1" >>confdefs.h
+
+ ;; #(
+ *)
+ as_fn_error "unknown endianness
+ presetting ac_cv_c_bigendian=no (or yes) will help" "$LINENO" 5 ;;
+ esac
+
+
+
+###############################################################################
+# Checks for library functions.
+###############################################################################
+
+# Gnulib replacements as needed
+
+ if test -z "$GETOPT_H"; then
+ for ac_header in getopt.h
+do :
+ ac_fn_c_check_header_mongrel "$LINENO" "getopt.h" "ac_cv_header_getopt_h" "$ac_includes_default"
+if test "x$ac_cv_header_getopt_h" = x""yes; then :
+ cat >>confdefs.h <<_ACEOF
+#define HAVE_GETOPT_H 1
+_ACEOF
+
+else
+ GETOPT_H=getopt.h
+fi
+
+done
+
+ fi
+
+ if test -z "$GETOPT_H"; then
+ for ac_func in getopt_long
+do :
+ ac_fn_c_check_func "$LINENO" "getopt_long" "ac_cv_func_getopt_long"
+if test "x$ac_cv_func_getopt_long" = x""yes; then :
+ cat >>confdefs.h <<_ACEOF
+#define HAVE_GETOPT_LONG 1
+_ACEOF
+
+else
+ GETOPT_H=getopt.h
+fi
+done
+
+ fi
+
+ if test -z "$GETOPT_H"; then
+ ac_fn_c_check_decl "$LINENO" "optreset" "ac_cv_have_decl_optreset" "#include <getopt.h>
+"
+if test "x$ac_cv_have_decl_optreset" = x""yes; then :
+
+$as_echo "#define HAVE_OPTRESET 1" >>confdefs.h
+
+fi
+
+ fi
+
+
+
+
+ if test -n "$GETOPT_H"; then :
+
+ case " $LIBOBJS " in
+ *" getopt.$ac_objext "* ) ;;
+ *) LIBOBJS="$LIBOBJS getopt.$ac_objext"
+ ;;
+esac
+
+ case " $LIBOBJS " in
+ *" getopt1.$ac_objext "* ) ;;
+ *) LIBOBJS="$LIBOBJS getopt1.$ac_objext"
+ ;;
+esac
+
+
+ GETOPT_H=getopt.h
+
+$as_echo "#define __GETOPT_PREFIX rpl_" >>confdefs.h
+
+
+
+
+fi
+
+
+# Find the best function to set timestamps.
+for ac_func in futimens futimes futimesat utimes utime
+do :
+ as_ac_var=`$as_echo "ac_cv_func_$ac_func" | $as_tr_sh`
+ac_fn_c_check_func "$LINENO" "$ac_func" "$as_ac_var"
+eval as_val=\$$as_ac_var
+ if test "x$as_val" = x""yes; then :
+ cat >>confdefs.h <<_ACEOF
+#define `$as_echo "HAVE_$ac_func" | $as_tr_cpp` 1
+_ACEOF
+ break
+fi
+done
+
+
+
+{ $as_echo "$as_me:${as_lineno-$LINENO}: checking how to detect the amount of physical memory" >&5
+$as_echo_n "checking how to detect the amount of physical memory... " >&6; }
+cat confdefs.h - <<_ACEOF >conftest.$ac_ext
+/* end confdefs.h. */
+
+#include <unistd.h>
+int
+main(void)
+{
+ long i;
+ i = sysconf(_SC_PAGESIZE);
+ i = sysconf(_SC_PHYS_PAGES);
+ return 0;
+}
+
+_ACEOF
+if ac_fn_c_try_compile "$LINENO"; then :
+
+
+$as_echo "#define HAVE_PHYSMEM_SYSCONF 1" >>confdefs.h
+
+ { $as_echo "$as_me:${as_lineno-$LINENO}: result: sysconf" >&5
+$as_echo "sysconf" >&6; }
+
+else
+
+cat confdefs.h - <<_ACEOF >conftest.$ac_ext
+/* end confdefs.h. */
+
+#include <sys/types.h>
+#ifdef HAVE_SYS_PARAM_H
+# include <sys/param.h>
+#endif
+#include <sys/sysctl.h>
+int
+main(void)
+{
+ int name[2] = { CTL_HW, HW_PHYSMEM };
+ unsigned long mem;
+ size_t mem_ptr_size = sizeof(mem);
+ sysctl(name, 2, &mem, &mem_ptr_size, NULL, NULL);
+ return 0;
+}
+
+_ACEOF
+if ac_fn_c_try_compile "$LINENO"; then :
+
+
+$as_echo "#define HAVE_PHYSMEM_SYSCTL 1" >>confdefs.h
+
+ { $as_echo "$as_me:${as_lineno-$LINENO}: result: sysctl" >&5
+$as_echo "sysctl" >&6; }
+
+else
+
+case $host_os in
+ linux*)
+ cat confdefs.h - <<_ACEOF >conftest.$ac_ext
+/* end confdefs.h. */
+
+#include <sys/sysinfo.h>
+int
+main(void)
+{
+ struct sysinfo si;
+ sysinfo(&si);
+ return 0;
+}
+
+_ACEOF
+if ac_fn_c_try_compile "$LINENO"; then :
+
+
+$as_echo "#define HAVE_PHYSMEM_SYSINFO 1" >>confdefs.h
+
+ { $as_echo "$as_me:${as_lineno-$LINENO}: result: sysinfo" >&5
+$as_echo "sysinfo" >&6; }
+
+else
+
+ { $as_echo "$as_me:${as_lineno-$LINENO}: result: unknown" >&5
+$as_echo "unknown" >&6; }
+
+fi
+rm -f core conftest.err conftest.$ac_objext conftest.$ac_ext
+ ;;
+ *)
+ { $as_echo "$as_me:${as_lineno-$LINENO}: result: unknown" >&5
+$as_echo "unknown" >&6; }
+ ;;
+esac
+
+fi
+rm -f core conftest.err conftest.$ac_objext conftest.$ac_ext
+fi
+rm -f core conftest.err conftest.$ac_objext conftest.$ac_ext
+
+
+{ $as_echo "$as_me:${as_lineno-$LINENO}: checking how to detect the number of available CPU cores" >&5
+$as_echo_n "checking how to detect the number of available CPU cores... " >&6; }
+cat confdefs.h - <<_ACEOF >conftest.$ac_ext
+/* end confdefs.h. */
+
+#include <unistd.h>
+int
+main(void)
+{
+ long i;
+ i = sysconf(_SC_NPROCESSORS_ONLN);
+ return 0;
+}
+
+_ACEOF
+if ac_fn_c_try_compile "$LINENO"; then :
+
+
+$as_echo "#define HAVE_CPUCORES_SYSCONF 1" >>confdefs.h
+
+ { $as_echo "$as_me:${as_lineno-$LINENO}: result: sysconf" >&5
+$as_echo "sysconf" >&6; }
+
+else
+
+cat confdefs.h - <<_ACEOF >conftest.$ac_ext
+/* end confdefs.h. */
+
+#include <sys/types.h>
+#ifdef HAVE_SYS_PARAM_H
+# include <sys/param.h>
+#endif
+#include <sys/sysctl.h>
+int
+main(void)
+{
+ int name[2] = { CTL_HW, HW_NCPU };
+ int cpus;
+ size_t cpus_size = sizeof(cpus);
+ sysctl(name, 2, &cpus, &cpus_size, NULL, NULL);
+ return 0;
+}
+
+_ACEOF
+if ac_fn_c_try_compile "$LINENO"; then :
+
+
+$as_echo "#define HAVE_CPUCORES_SYSCTL 1" >>confdefs.h
+
+ { $as_echo "$as_me:${as_lineno-$LINENO}: result: sysctl" >&5
+$as_echo "sysctl" >&6; }
+
+else
+
+ { $as_echo "$as_me:${as_lineno-$LINENO}: result: unknown" >&5
+$as_echo "unknown" >&6; }
+
+fi
+rm -f core conftest.err conftest.$ac_objext conftest.$ac_ext
+fi
+rm -f core conftest.err conftest.$ac_objext conftest.$ac_ext
+
+
+
+###############################################################################
+# If using GCC, set some additional AM_CFLAGS:
+###############################################################################
+
+if test "$GCC" = yes ; then
+ echo
+ echo "GCC extensions:"
+fi
+
+# Always do the visibility check but don't set AM_CFLAGS on Windows.
+# This way things get set properly even on Windows.
+
+
+ CFLAG_VISIBILITY=
+ HAVE_VISIBILITY=0
+ if test -n "$GCC"; then
+ { $as_echo "$as_me:${as_lineno-$LINENO}: checking for simple visibility declarations" >&5
+$as_echo_n "checking for simple visibility declarations... " >&6; }
+ if test "${gl_cv_cc_visibility+set}" = set; then :
+ $as_echo_n "(cached) " >&6
+else
+
+ gl_save_CFLAGS="$CFLAGS"
+ CFLAGS="$CFLAGS -fvisibility=hidden"
+ cat confdefs.h - <<_ACEOF >conftest.$ac_ext
+/* end confdefs.h. */
+extern __attribute__((__visibility__("hidden"))) int hiddenvar;
+ extern __attribute__((__visibility__("default"))) int exportedvar;
+ extern __attribute__((__visibility__("hidden"))) int hiddenfunc (void);
+ extern __attribute__((__visibility__("default"))) int exportedfunc (void);
+int
+main ()
+{
+
+ ;
+ return 0;
+}
+_ACEOF
+if ac_fn_c_try_compile "$LINENO"; then :
+ gl_cv_cc_visibility=yes
+else
+ gl_cv_cc_visibility=no
+fi
+rm -f core conftest.err conftest.$ac_objext conftest.$ac_ext
+ CFLAGS="$gl_save_CFLAGS"
+fi
+
+ { $as_echo "$as_me:${as_lineno-$LINENO}: result: $gl_cv_cc_visibility" >&5
+$as_echo "$gl_cv_cc_visibility" >&6; }
+ if test $gl_cv_cc_visibility = yes; then
+ CFLAG_VISIBILITY="-fvisibility=hidden"
+ HAVE_VISIBILITY=1
+ fi
+ fi
+
+
+
+cat >>confdefs.h <<_ACEOF
+#define HAVE_VISIBILITY $HAVE_VISIBILITY
+_ACEOF
+
+
+if test -n "$CFLAG_VISIBILITY" && test "$is_w32" = no; then
+ AM_CFLAGS="$AM_CFLAGS $CFLAG_VISIBILITY"
+fi
+
+if test "$GCC" = yes ; then
+ # Enable as much warnings as possible. These commented warnings won't
+ # work for this package though:
+ # * -Wunreachable-code breaks several assert(0) cases, which are
+ # backed up with "return LZMA_PROG_ERROR".
+ # * -Wcast-qual would break various things where we need a non-const
+ # pointer although we don't modify anything through it.
+ # * -Wcast-align breaks optimized CRC32 and CRC64 implementation
+ # on some architectures (not on x86), where this warning is bogus,
+ # because we take care of correct alignment.
+ # * -Winline, -Wdisabled-optimization, -Wunsafe-loop-optimizations
+ # don't seem so useful here; at least the last one gives some
+ # warnings which are not bugs.
+ for NEW_FLAG in \
+ -Wall \
+ -Wextra \
+ -Wformat=2 \
+ -Winit-self \
+ -Wmissing-include-dirs \
+ -Wstrict-aliasing \
+ -Wfloat-equal \
+ -Wundef \
+ -Wshadow \
+ -Wpointer-arith \
+ -Wbad-function-cast \
+ -Wwrite-strings \
+ -Wlogical-op \
+ -Waggregate-return \
+ -Wstrict-prototypes \
+ -Wold-style-definition \
+ -Wmissing-prototypes \
+ -Wmissing-declarations \
+ -Wmissing-noreturn \
+ -Wredundant-decls
+ do
+ { $as_echo "$as_me:${as_lineno-$LINENO}: checking if $CC accepts $NEW_FLAG" >&5
+$as_echo_n "checking if $CC accepts $NEW_FLAG... " >&6; }
+ OLD_CFLAGS="$CFLAGS"
+ CFLAGS="$CFLAGS $NEW_FLAG"
+ cat confdefs.h - <<_ACEOF >conftest.$ac_ext
+/* end confdefs.h. */
+void foo(void) { }
+_ACEOF
+if ac_fn_c_try_compile "$LINENO"; then :
+
+ AM_CFLAGS="$AM_CFLAGS $NEW_FLAG"
+ { $as_echo "$as_me:${as_lineno-$LINENO}: result: yes" >&5
+$as_echo "yes" >&6; }
+
+else
+
+ { $as_echo "$as_me:${as_lineno-$LINENO}: result: no" >&5
+$as_echo "no" >&6; }
+
+fi
+rm -f core conftest.err conftest.$ac_objext conftest.$ac_ext
+ CFLAGS="$OLD_CFLAGS"
+ done
+
+ # Check whether --enable-werror was given.
+if test "${enable_werror+set}" = set; then :
+ enableval=$enable_werror;
+else
+ enable_werror=no
+fi
+
+ if test "x$enable_werror" = "xyes"; then
+ AM_CFLAGS="$AM_CFLAGS -Werror"
+ fi
+fi
+
+
+###############################################################################
+# Create the makefiles and config.h
+###############################################################################
+
+echo
+
+# Don't build the lib directory at all if we don't need any replacement
+# functions.
+ if test -n "$LIBOBJS"; then
+ COND_GNULIB_TRUE=
+ COND_GNULIB_FALSE='#'
+else
+ COND_GNULIB_TRUE='#'
+ COND_GNULIB_FALSE=
+fi
+
+
+# Add default AM_CFLAGS.
+
+
+# Set additional flags for static/dynamic linking. The idea is that every
+# program (not library) being built will use either STATIC_{CPPFLAGS,LDFLAGS}
+# or DYNAMIC_{CPPFLAGS,LDFLAGS} depending on which type of linkage is
+# preferred. These preferences get overriden by use of --disable-static,
+# --disable-shared, or --enable-dynamic.
+#
+# This is quite messy, because we want to use LZMA_API_STATIC when linking
+# against static liblzma. It's needed on Windows.
+if test "x$enable_static" = xno; then
+ enable_dynamic=yes
+fi
+if test "x$enable_shared" = xno; then
+ enable_dynamic=no
+fi
+case $enable_dynamic in
+ yes)
+ STATIC_CPPFLAGS=
+ STATIC_LDFLAGS=
+ DYNAMIC_CPPFLAGS=
+ DYNAMIC_LDFLAGS=
+ ;;
+ mixed)
+ STATIC_CPPFLAGS="-DLZMA_API_STATIC"
+ STATIC_LDFLAGS="-static"
+ DYNAMIC_CPPFLAGS=
+ DYNAMIC_LDFLAGS=
+ ;;
+ no)
+ STATIC_CPPFLAGS="-DLZMA_API_STATIC"
+ STATIC_LDFLAGS="-static"
+ DYNAMIC_CPPFLAGS="-DLZMA_API_STATIC"
+ DYNAMIC_LDFLAGS="-static"
+ ;;
+esac
+
+
+
+
+
+# This is needed for src/scripts.
+xz=`echo xz | sed "$program_transform_name"`
+
+
+ac_config_files="$ac_config_files Doxyfile Makefile po/Makefile.in lib/Makefile src/Makefile src/liblzma/liblzma.pc src/liblzma/Makefile src/liblzma/api/Makefile src/xz/Makefile src/xzdec/Makefile src/lzmainfo/Makefile src/scripts/Makefile src/scripts/xzdiff src/scripts/xzgrep src/scripts/xzmore src/scripts/xzless tests/Makefile debug/Makefile"
+
+
+cat >confcache <<\_ACEOF
+# This file is a shell script that caches the results of configure
+# tests run on this system so they can be shared between configure
+# scripts and configure runs, see configure's option --config-cache.
+# It is not useful on other systems. If it contains results you don't
+# want to keep, you may remove or edit it.
+#
+# config.status only pays attention to the cache file if you give it
+# the --recheck option to rerun configure.
+#
+# `ac_cv_env_foo' variables (set or unset) will be overridden when
+# loading this file, other *unset* `ac_cv_foo' will be assigned the
+# following values.
+
+_ACEOF
+
+# The following way of writing the cache mishandles newlines in values,
+# but we know of no workaround that is simple, portable, and efficient.
+# So, we kill variables containing newlines.
+# Ultrix sh set writes to stderr and can't be redirected directly,
+# and sets the high bit in the cache file unless we assign to the vars.
+(
+ for ac_var in `(set) 2>&1 | sed -n 's/^\([a-zA-Z_][a-zA-Z0-9_]*\)=.*/\1/p'`; do
+ eval ac_val=\$$ac_var
+ case $ac_val in #(
+ *${as_nl}*)
+ case $ac_var in #(
+ *_cv_*) { $as_echo "$as_me:${as_lineno-$LINENO}: WARNING: cache variable $ac_var contains a newline" >&5
+$as_echo "$as_me: WARNING: cache variable $ac_var contains a newline" >&2;} ;;
+ esac
+ case $ac_var in #(
+ _ | IFS | as_nl) ;; #(
+ BASH_ARGV | BASH_SOURCE) eval $ac_var= ;; #(
+ *) { eval $ac_var=; unset $ac_var;} ;;
+ esac ;;
+ esac
+ done
+
+ (set) 2>&1 |
+ case $as_nl`(ac_space=' '; set) 2>&1` in #(
+ *${as_nl}ac_space=\ *)
+ # `set' does not quote correctly, so add quotes: double-quote
+ # substitution turns \\\\ into \\, and sed turns \\ into \.
+ sed -n \
+ "s/'/'\\\\''/g;
+ s/^\\([_$as_cr_alnum]*_cv_[_$as_cr_alnum]*\\)=\\(.*\\)/\\1='\\2'/p"
+ ;; #(
+ *)
+ # `set' quotes correctly as required by POSIX, so do not add quotes.
+ sed -n "/^[_$as_cr_alnum]*_cv_[_$as_cr_alnum]*=/p"
+ ;;
+ esac |
+ sort
+) |
+ sed '
+ /^ac_cv_env_/b end
+ t clear
+ :clear
+ s/^\([^=]*\)=\(.*[{}].*\)$/test "${\1+set}" = set || &/
+ t end
+ s/^\([^=]*\)=\(.*\)$/\1=${\1=\2}/
+ :end' >>confcache
+if diff "$cache_file" confcache >/dev/null 2>&1; then :; else
+ if test -w "$cache_file"; then
+ test "x$cache_file" != "x/dev/null" &&
+ { $as_echo "$as_me:${as_lineno-$LINENO}: updating cache $cache_file" >&5
+$as_echo "$as_me: updating cache $cache_file" >&6;}
+ cat confcache >$cache_file
+ else
+ { $as_echo "$as_me:${as_lineno-$LINENO}: not updating unwritable cache $cache_file" >&5
+$as_echo "$as_me: not updating unwritable cache $cache_file" >&6;}
+ fi
+fi
+rm -f confcache
+
+test "x$prefix" = xNONE && prefix=$ac_default_prefix
+# Let make expand exec_prefix.
+test "x$exec_prefix" = xNONE && exec_prefix='${prefix}'
+
+DEFS=-DHAVE_CONFIG_H
+
+ac_libobjs=
+ac_ltlibobjs=
+for ac_i in : $LIBOBJS; do test "x$ac_i" = x: && continue
+ # 1. Remove the extension, and $U if already installed.
+ ac_script='s/\$U\././;s/\.o$//;s/\.obj$//'
+ ac_i=`$as_echo "$ac_i" | sed "$ac_script"`
+ # 2. Prepend LIBOBJDIR. When used with automake>=1.10 LIBOBJDIR
+ # will be set to the directory where LIBOBJS objects are built.
+ as_fn_append ac_libobjs " \${LIBOBJDIR}$ac_i\$U.$ac_objext"
+ as_fn_append ac_ltlibobjs " \${LIBOBJDIR}$ac_i"'$U.lo'
+done
+LIBOBJS=$ac_libobjs
+
+LTLIBOBJS=$ac_ltlibobjs
+
+
+if test -z "${COND_W32_TRUE}" && test -z "${COND_W32_FALSE}"; then
+ as_fn_error "conditional \"COND_W32\" was never defined.
+Usually this means the macro was only invoked conditionally." "$LINENO" 5
+fi
+if test -z "${COND_MAIN_ENCODER_TRUE}" && test -z "${COND_MAIN_ENCODER_FALSE}"; then
+ as_fn_error "conditional \"COND_MAIN_ENCODER\" was never defined.
+Usually this means the macro was only invoked conditionally." "$LINENO" 5
+fi
+if test -z "${COND_MAIN_DECODER_TRUE}" && test -z "${COND_MAIN_DECODER_FALSE}"; then
+ as_fn_error "conditional \"COND_MAIN_DECODER\" was never defined.
+Usually this means the macro was only invoked conditionally." "$LINENO" 5
+fi
+if test -z "${COND_FILTER_LZMA1_TRUE}" && test -z "${COND_FILTER_LZMA1_FALSE}"; then
+ as_fn_error "conditional \"COND_FILTER_LZMA1\" was never defined.
+Usually this means the macro was only invoked conditionally." "$LINENO" 5
+fi
+if test -z "${COND_ENCODER_LZMA1_TRUE}" && test -z "${COND_ENCODER_LZMA1_FALSE}"; then
+ as_fn_error "conditional \"COND_ENCODER_LZMA1\" was never defined.
+Usually this means the macro was only invoked conditionally." "$LINENO" 5
+fi
+if test -z "${COND_DECODER_LZMA1_TRUE}" && test -z "${COND_DECODER_LZMA1_FALSE}"; then
+ as_fn_error "conditional \"COND_DECODER_LZMA1\" was never defined.
+Usually this means the macro was only invoked conditionally." "$LINENO" 5
+fi
+if test -z "${COND_FILTER_LZMA2_TRUE}" && test -z "${COND_FILTER_LZMA2_FALSE}"; then
+ as_fn_error "conditional \"COND_FILTER_LZMA2\" was never defined.
+Usually this means the macro was only invoked conditionally." "$LINENO" 5
+fi
+if test -z "${COND_ENCODER_LZMA2_TRUE}" && test -z "${COND_ENCODER_LZMA2_FALSE}"; then
+ as_fn_error "conditional \"COND_ENCODER_LZMA2\" was never defined.
+Usually this means the macro was only invoked conditionally." "$LINENO" 5
+fi
+if test -z "${COND_DECODER_LZMA2_TRUE}" && test -z "${COND_DECODER_LZMA2_FALSE}"; then
+ as_fn_error "conditional \"COND_DECODER_LZMA2\" was never defined.
+Usually this means the macro was only invoked conditionally." "$LINENO" 5
+fi
+if test -z "${COND_FILTER_SUBBLOCK_TRUE}" && test -z "${COND_FILTER_SUBBLOCK_FALSE}"; then
+ as_fn_error "conditional \"COND_FILTER_SUBBLOCK\" was never defined.
+Usually this means the macro was only invoked conditionally." "$LINENO" 5
+fi
+if test -z "${COND_ENCODER_SUBBLOCK_TRUE}" && test -z "${COND_ENCODER_SUBBLOCK_FALSE}"; then
+ as_fn_error "conditional \"COND_ENCODER_SUBBLOCK\" was never defined.
+Usually this means the macro was only invoked conditionally." "$LINENO" 5
+fi
+if test -z "${COND_DECODER_SUBBLOCK_TRUE}" && test -z "${COND_DECODER_SUBBLOCK_FALSE}"; then
+ as_fn_error "conditional \"COND_DECODER_SUBBLOCK\" was never defined.
+Usually this means the macro was only invoked conditionally." "$LINENO" 5
+fi
+if test -z "${COND_FILTER_DELTA_TRUE}" && test -z "${COND_FILTER_DELTA_FALSE}"; then
+ as_fn_error "conditional \"COND_FILTER_DELTA\" was never defined.
+Usually this means the macro was only invoked conditionally." "$LINENO" 5
+fi
+if test -z "${COND_ENCODER_DELTA_TRUE}" && test -z "${COND_ENCODER_DELTA_FALSE}"; then
+ as_fn_error "conditional \"COND_ENCODER_DELTA\" was never defined.
+Usually this means the macro was only invoked conditionally." "$LINENO" 5
+fi
+if test -z "${COND_DECODER_DELTA_TRUE}" && test -z "${COND_DECODER_DELTA_FALSE}"; then
+ as_fn_error "conditional \"COND_DECODER_DELTA\" was never defined.
+Usually this means the macro was only invoked conditionally." "$LINENO" 5
+fi
+if test -z "${COND_FILTER_X86_TRUE}" && test -z "${COND_FILTER_X86_FALSE}"; then
+ as_fn_error "conditional \"COND_FILTER_X86\" was never defined.
+Usually this means the macro was only invoked conditionally." "$LINENO" 5
+fi
+if test -z "${COND_ENCODER_X86_TRUE}" && test -z "${COND_ENCODER_X86_FALSE}"; then
+ as_fn_error "conditional \"COND_ENCODER_X86\" was never defined.
+Usually this means the macro was only invoked conditionally." "$LINENO" 5
+fi
+if test -z "${COND_DECODER_X86_TRUE}" && test -z "${COND_DECODER_X86_FALSE}"; then
+ as_fn_error "conditional \"COND_DECODER_X86\" was never defined.
+Usually this means the macro was only invoked conditionally." "$LINENO" 5
+fi
+if test -z "${COND_FILTER_POWERPC_TRUE}" && test -z "${COND_FILTER_POWERPC_FALSE}"; then
+ as_fn_error "conditional \"COND_FILTER_POWERPC\" was never defined.
+Usually this means the macro was only invoked conditionally." "$LINENO" 5
+fi
+if test -z "${COND_ENCODER_POWERPC_TRUE}" && test -z "${COND_ENCODER_POWERPC_FALSE}"; then
+ as_fn_error "conditional \"COND_ENCODER_POWERPC\" was never defined.
+Usually this means the macro was only invoked conditionally." "$LINENO" 5
+fi
+if test -z "${COND_DECODER_POWERPC_TRUE}" && test -z "${COND_DECODER_POWERPC_FALSE}"; then
+ as_fn_error "conditional \"COND_DECODER_POWERPC\" was never defined.
+Usually this means the macro was only invoked conditionally." "$LINENO" 5
+fi
+if test -z "${COND_FILTER_IA64_TRUE}" && test -z "${COND_FILTER_IA64_FALSE}"; then
+ as_fn_error "conditional \"COND_FILTER_IA64\" was never defined.
+Usually this means the macro was only invoked conditionally." "$LINENO" 5
+fi
+if test -z "${COND_ENCODER_IA64_TRUE}" && test -z "${COND_ENCODER_IA64_FALSE}"; then
+ as_fn_error "conditional \"COND_ENCODER_IA64\" was never defined.
+Usually this means the macro was only invoked conditionally." "$LINENO" 5
+fi
+if test -z "${COND_DECODER_IA64_TRUE}" && test -z "${COND_DECODER_IA64_FALSE}"; then
+ as_fn_error "conditional \"COND_DECODER_IA64\" was never defined.
+Usually this means the macro was only invoked conditionally." "$LINENO" 5
+fi
+if test -z "${COND_FILTER_ARM_TRUE}" && test -z "${COND_FILTER_ARM_FALSE}"; then
+ as_fn_error "conditional \"COND_FILTER_ARM\" was never defined.
+Usually this means the macro was only invoked conditionally." "$LINENO" 5
+fi
+if test -z "${COND_ENCODER_ARM_TRUE}" && test -z "${COND_ENCODER_ARM_FALSE}"; then
+ as_fn_error "conditional \"COND_ENCODER_ARM\" was never defined.
+Usually this means the macro was only invoked conditionally." "$LINENO" 5
+fi
+if test -z "${COND_DECODER_ARM_TRUE}" && test -z "${COND_DECODER_ARM_FALSE}"; then
+ as_fn_error "conditional \"COND_DECODER_ARM\" was never defined.
+Usually this means the macro was only invoked conditionally." "$LINENO" 5
+fi
+if test -z "${COND_FILTER_ARMTHUMB_TRUE}" && test -z "${COND_FILTER_ARMTHUMB_FALSE}"; then
+ as_fn_error "conditional \"COND_FILTER_ARMTHUMB\" was never defined.
+Usually this means the macro was only invoked conditionally." "$LINENO" 5
+fi
+if test -z "${COND_ENCODER_ARMTHUMB_TRUE}" && test -z "${COND_ENCODER_ARMTHUMB_FALSE}"; then
+ as_fn_error "conditional \"COND_ENCODER_ARMTHUMB\" was never defined.
+Usually this means the macro was only invoked conditionally." "$LINENO" 5
+fi
+if test -z "${COND_DECODER_ARMTHUMB_TRUE}" && test -z "${COND_DECODER_ARMTHUMB_FALSE}"; then
+ as_fn_error "conditional \"COND_DECODER_ARMTHUMB\" was never defined.
+Usually this means the macro was only invoked conditionally." "$LINENO" 5
+fi
+if test -z "${COND_FILTER_SPARC_TRUE}" && test -z "${COND_FILTER_SPARC_FALSE}"; then
+ as_fn_error "conditional \"COND_FILTER_SPARC\" was never defined.
+Usually this means the macro was only invoked conditionally." "$LINENO" 5
+fi
+if test -z "${COND_ENCODER_SPARC_TRUE}" && test -z "${COND_ENCODER_SPARC_FALSE}"; then
+ as_fn_error "conditional \"COND_ENCODER_SPARC\" was never defined.
+Usually this means the macro was only invoked conditionally." "$LINENO" 5
+fi
+if test -z "${COND_DECODER_SPARC_TRUE}" && test -z "${COND_DECODER_SPARC_FALSE}"; then
+ as_fn_error "conditional \"COND_DECODER_SPARC\" was never defined.
+Usually this means the macro was only invoked conditionally." "$LINENO" 5
+fi
+if test -z "${COND_FILTER_SIMPLE_TRUE}" && test -z "${COND_FILTER_SIMPLE_FALSE}"; then
+ as_fn_error "conditional \"COND_FILTER_SIMPLE\" was never defined.
+Usually this means the macro was only invoked conditionally." "$LINENO" 5
+fi
+if test -z "${COND_ENCODER_SIMPLE_TRUE}" && test -z "${COND_ENCODER_SIMPLE_FALSE}"; then
+ as_fn_error "conditional \"COND_ENCODER_SIMPLE\" was never defined.
+Usually this means the macro was only invoked conditionally." "$LINENO" 5
+fi
+if test -z "${COND_DECODER_SIMPLE_TRUE}" && test -z "${COND_DECODER_SIMPLE_FALSE}"; then
+ as_fn_error "conditional \"COND_DECODER_SIMPLE\" was never defined.
+Usually this means the macro was only invoked conditionally." "$LINENO" 5
+fi
+if test -z "${COND_FILTER_LZ_TRUE}" && test -z "${COND_FILTER_LZ_FALSE}"; then
+ as_fn_error "conditional \"COND_FILTER_LZ\" was never defined.
+Usually this means the macro was only invoked conditionally." "$LINENO" 5
+fi
+if test -z "${COND_ENCODER_LZ_TRUE}" && test -z "${COND_ENCODER_LZ_FALSE}"; then
+ as_fn_error "conditional \"COND_ENCODER_LZ\" was never defined.
+Usually this means the macro was only invoked conditionally." "$LINENO" 5
+fi
+if test -z "${COND_DECODER_LZ_TRUE}" && test -z "${COND_DECODER_LZ_FALSE}"; then
+ as_fn_error "conditional \"COND_DECODER_LZ\" was never defined.
+Usually this means the macro was only invoked conditionally." "$LINENO" 5
+fi
+if test -z "${COND_CHECK_CRC32_TRUE}" && test -z "${COND_CHECK_CRC32_FALSE}"; then
+ as_fn_error "conditional \"COND_CHECK_CRC32\" was never defined.
+Usually this means the macro was only invoked conditionally." "$LINENO" 5
+fi
+if test -z "${COND_CHECK_CRC64_TRUE}" && test -z "${COND_CHECK_CRC64_FALSE}"; then
+ as_fn_error "conditional \"COND_CHECK_CRC64\" was never defined.
+Usually this means the macro was only invoked conditionally." "$LINENO" 5
+fi
+if test -z "${COND_CHECK_SHA256_TRUE}" && test -z "${COND_CHECK_SHA256_FALSE}"; then
+ as_fn_error "conditional \"COND_CHECK_SHA256\" was never defined.
+Usually this means the macro was only invoked conditionally." "$LINENO" 5
+fi
+if test -z "${COND_ASM_X86_TRUE}" && test -z "${COND_ASM_X86_FALSE}"; then
+ as_fn_error "conditional \"COND_ASM_X86\" was never defined.
+Usually this means the macro was only invoked conditionally." "$LINENO" 5
+fi
+if test -z "${COND_ASM_X86_64_TRUE}" && test -z "${COND_ASM_X86_64_FALSE}"; then
+ as_fn_error "conditional \"COND_ASM_X86_64\" was never defined.
+Usually this means the macro was only invoked conditionally." "$LINENO" 5
+fi
+if test -z "${COND_SMALL_TRUE}" && test -z "${COND_SMALL_FALSE}"; then
+ as_fn_error "conditional \"COND_SMALL\" was never defined.
+Usually this means the macro was only invoked conditionally." "$LINENO" 5
+fi
+ if test -n "$EXEEXT"; then
+ am__EXEEXT_TRUE=
+ am__EXEEXT_FALSE='#'
+else
+ am__EXEEXT_TRUE='#'
+ am__EXEEXT_FALSE=
+fi
+
+if test -z "${AMDEP_TRUE}" && test -z "${AMDEP_FALSE}"; then
+ as_fn_error "conditional \"AMDEP\" was never defined.
+Usually this means the macro was only invoked conditionally." "$LINENO" 5
+fi
+if test -z "${am__fastdepCC_TRUE}" && test -z "${am__fastdepCC_FALSE}"; then
+ as_fn_error "conditional \"am__fastdepCC\" was never defined.
+Usually this means the macro was only invoked conditionally." "$LINENO" 5
+fi
+if test -z "${am__fastdepCCAS_TRUE}" && test -z "${am__fastdepCCAS_FALSE}"; then
+ as_fn_error "conditional \"am__fastdepCCAS\" was never defined.
+Usually this means the macro was only invoked conditionally." "$LINENO" 5
+fi
+if test -z "${COND_SHARED_TRUE}" && test -z "${COND_SHARED_FALSE}"; then
+ as_fn_error "conditional \"COND_SHARED\" was never defined.
+Usually this means the macro was only invoked conditionally." "$LINENO" 5
+fi
+
+if test -z "${COND_GNULIB_TRUE}" && test -z "${COND_GNULIB_FALSE}"; then
+ as_fn_error "conditional \"COND_GNULIB\" was never defined.
+Usually this means the macro was only invoked conditionally." "$LINENO" 5
+fi
+
+: ${CONFIG_STATUS=./config.status}
+ac_write_fail=0
+ac_clean_files_save=$ac_clean_files
+ac_clean_files="$ac_clean_files $CONFIG_STATUS"
+{ $as_echo "$as_me:${as_lineno-$LINENO}: creating $CONFIG_STATUS" >&5
+$as_echo "$as_me: creating $CONFIG_STATUS" >&6;}
+as_write_fail=0
+cat >$CONFIG_STATUS <<_ASEOF || as_write_fail=1
+#! $SHELL
+# Generated by $as_me.
+# Run this file to recreate the current configuration.
+# Compiler output produced by configure, useful for debugging
+# configure, is in config.log if it exists.
+
+debug=false
+ac_cs_recheck=false
+ac_cs_silent=false
+
+SHELL=\${CONFIG_SHELL-$SHELL}
+export SHELL
+_ASEOF
+cat >>$CONFIG_STATUS <<\_ASEOF || as_write_fail=1
+## -------------------- ##
+## M4sh Initialization. ##
+## -------------------- ##
+
+# Be more Bourne compatible
+DUALCASE=1; export DUALCASE # for MKS sh
+if test -n "${ZSH_VERSION+set}" && (emulate sh) >/dev/null 2>&1; then :
+ emulate sh
+ NULLCMD=:
+ # Pre-4.2 versions of Zsh do word splitting on ${1+"$@"}, which
+ # is contrary to our usage. Disable this feature.
+ alias -g '${1+"$@"}'='"$@"'
+ setopt NO_GLOB_SUBST
+else
+ case `(set -o) 2>/dev/null` in #(
+ *posix*) :
+ set -o posix ;; #(
+ *) :
+ ;;
+esac
+fi
+
+
+as_nl='
+'
+export as_nl
+# Printing a long string crashes Solaris 7 /usr/bin/printf.
+as_echo='\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\'
+as_echo=$as_echo$as_echo$as_echo$as_echo$as_echo
+as_echo=$as_echo$as_echo$as_echo$as_echo$as_echo$as_echo
+# Prefer a ksh shell builtin over an external printf program on Solaris,
+# but without wasting forks for bash or zsh.
+if test -z "$BASH_VERSION$ZSH_VERSION" \
+ && (test "X`print -r -- $as_echo`" = "X$as_echo") 2>/dev/null; then
+ as_echo='print -r --'
+ as_echo_n='print -rn --'
+elif (test "X`printf %s $as_echo`" = "X$as_echo") 2>/dev/null; then
+ as_echo='printf %s\n'
+ as_echo_n='printf %s'
+else
+ if test "X`(/usr/ucb/echo -n -n $as_echo) 2>/dev/null`" = "X-n $as_echo"; then
+ as_echo_body='eval /usr/ucb/echo -n "$1$as_nl"'
+ as_echo_n='/usr/ucb/echo -n'
+ else
+ as_echo_body='eval expr "X$1" : "X\\(.*\\)"'
+ as_echo_n_body='eval
+ arg=$1;
+ case $arg in #(
+ *"$as_nl"*)
+ expr "X$arg" : "X\\(.*\\)$as_nl";
+ arg=`expr "X$arg" : ".*$as_nl\\(.*\\)"`;;
+ esac;
+ expr "X$arg" : "X\\(.*\\)" | tr -d "$as_nl"
+ '
+ export as_echo_n_body
+ as_echo_n='sh -c $as_echo_n_body as_echo'
+ fi
+ export as_echo_body
+ as_echo='sh -c $as_echo_body as_echo'
+fi
+
+# The user is always right.
+if test "${PATH_SEPARATOR+set}" != set; then
+ PATH_SEPARATOR=:
+ (PATH='/bin;/bin'; FPATH=$PATH; sh -c :) >/dev/null 2>&1 && {
+ (PATH='/bin:/bin'; FPATH=$PATH; sh -c :) >/dev/null 2>&1 ||
+ PATH_SEPARATOR=';'
+ }
+fi
+
+
+# IFS
+# We need space, tab and new line, in precisely that order. Quoting is
+# there to prevent editors from complaining about space-tab.
+# (If _AS_PATH_WALK were called with IFS unset, it would disable word
+# splitting by setting IFS to empty value.)
+IFS=" "" $as_nl"
+
+# Find who we are. Look in the path if we contain no directory separator.
+case $0 in #((
+ *[\\/]* ) as_myself=$0 ;;
+ *) as_save_IFS=$IFS; IFS=$PATH_SEPARATOR
+for as_dir in $PATH
+do
+ IFS=$as_save_IFS
+ test -z "$as_dir" && as_dir=.
+ test -r "$as_dir/$0" && as_myself=$as_dir/$0 && break
+ done
+IFS=$as_save_IFS
+
+ ;;
+esac
+# We did not find ourselves, most probably we were run as `sh COMMAND'
+# in which case we are not to be found in the path.
+if test "x$as_myself" = x; then
+ as_myself=$0
+fi
+if test ! -f "$as_myself"; then
+ $as_echo "$as_myself: error: cannot find myself; rerun with an absolute file name" >&2
+ exit 1
+fi
+
+# Unset variables that we do not need and which cause bugs (e.g. in
+# pre-3.0 UWIN ksh). But do not cause bugs in bash 2.01; the "|| exit 1"
+# suppresses any "Segmentation fault" message there. '((' could
+# trigger a bug in pdksh 5.2.14.
+for as_var in BASH_ENV ENV MAIL MAILPATH
+do eval test x\${$as_var+set} = xset \
+ && ( (unset $as_var) || exit 1) >/dev/null 2>&1 && unset $as_var || :
+done
+PS1='$ '
+PS2='> '
+PS4='+ '
+
+# NLS nuisances.
+LC_ALL=C
+export LC_ALL
+LANGUAGE=C
+export LANGUAGE
+
+# CDPATH.
+(unset CDPATH) >/dev/null 2>&1 && unset CDPATH
+
+
+# as_fn_error ERROR [LINENO LOG_FD]
+# ---------------------------------
+# Output "`basename $0`: error: ERROR" to stderr. If LINENO and LOG_FD are
+# provided, also output the error to LOG_FD, referencing LINENO. Then exit the
+# script with status $?, using 1 if that was 0.
+as_fn_error ()
+{
+ as_status=$?; test $as_status -eq 0 && as_status=1
+ if test "$3"; then
+ as_lineno=${as_lineno-"$2"} as_lineno_stack=as_lineno_stack=$as_lineno_stack
+ $as_echo "$as_me:${as_lineno-$LINENO}: error: $1" >&$3
+ fi
+ $as_echo "$as_me: error: $1" >&2
+ as_fn_exit $as_status
+} # as_fn_error
+
+
+# as_fn_set_status STATUS
+# -----------------------
+# Set $? to STATUS, without forking.
+as_fn_set_status ()
+{
+ return $1
+} # as_fn_set_status
+
+# as_fn_exit STATUS
+# -----------------
+# Exit the shell with STATUS, even in a "trap 0" or "set -e" context.
+as_fn_exit ()
+{
+ set +e
+ as_fn_set_status $1
+ exit $1
+} # as_fn_exit
+
+# as_fn_unset VAR
+# ---------------
+# Portably unset VAR.
+as_fn_unset ()
+{
+ { eval $1=; unset $1;}
+}
+as_unset=as_fn_unset
+# as_fn_append VAR VALUE
+# ----------------------
+# Append the text in VALUE to the end of the definition contained in VAR. Take
+# advantage of any shell optimizations that allow amortized linear growth over
+# repeated appends, instead of the typical quadratic growth present in naive
+# implementations.
+if (eval "as_var=1; as_var+=2; test x\$as_var = x12") 2>/dev/null; then :
+ eval 'as_fn_append ()
+ {
+ eval $1+=\$2
+ }'
+else
+ as_fn_append ()
+ {
+ eval $1=\$$1\$2
+ }
+fi # as_fn_append
+
+# as_fn_arith ARG...
+# ------------------
+# Perform arithmetic evaluation on the ARGs, and store the result in the
+# global $as_val. Take advantage of shells that can avoid forks. The arguments
+# must be portable across $(()) and expr.
+if (eval "test \$(( 1 + 1 )) = 2") 2>/dev/null; then :
+ eval 'as_fn_arith ()
+ {
+ as_val=$(( $* ))
+ }'
+else
+ as_fn_arith ()
+ {
+ as_val=`expr "$@" || test $? -eq 1`
+ }
+fi # as_fn_arith
+
+
+if expr a : '\(a\)' >/dev/null 2>&1 &&
+ test "X`expr 00001 : '.*\(...\)'`" = X001; then
+ as_expr=expr
+else
+ as_expr=false
+fi
+
+if (basename -- /) >/dev/null 2>&1 && test "X`basename -- / 2>&1`" = "X/"; then
+ as_basename=basename
+else
+ as_basename=false
+fi
+
+if (as_dir=`dirname -- /` && test "X$as_dir" = X/) >/dev/null 2>&1; then
+ as_dirname=dirname
+else
+ as_dirname=false
+fi
+
+as_me=`$as_basename -- "$0" ||
+$as_expr X/"$0" : '.*/\([^/][^/]*\)/*$' \| \
+ X"$0" : 'X\(//\)$' \| \
+ X"$0" : 'X\(/\)' \| . 2>/dev/null ||
+$as_echo X/"$0" |
+ sed '/^.*\/\([^/][^/]*\)\/*$/{
+ s//\1/
+ q
+ }
+ /^X\/\(\/\/\)$/{
+ s//\1/
+ q
+ }
+ /^X\/\(\/\).*/{
+ s//\1/
+ q
+ }
+ s/.*/./; q'`
+
+# Avoid depending upon Character Ranges.
+as_cr_letters='abcdefghijklmnopqrstuvwxyz'
+as_cr_LETTERS='ABCDEFGHIJKLMNOPQRSTUVWXYZ'
+as_cr_Letters=$as_cr_letters$as_cr_LETTERS
+as_cr_digits='0123456789'
+as_cr_alnum=$as_cr_Letters$as_cr_digits
+
+ECHO_C= ECHO_N= ECHO_T=
+case `echo -n x` in #(((((
+-n*)
+ case `echo 'xy\c'` in
+ *c*) ECHO_T=' ';; # ECHO_T is single tab character.
+ xy) ECHO_C='\c';;
+ *) echo `echo ksh88 bug on AIX 6.1` > /dev/null
+ ECHO_T=' ';;
+ esac;;
+*)
+ ECHO_N='-n';;
+esac
+
+rm -f conf$$ conf$$.exe conf$$.file
+if test -d conf$$.dir; then
+ rm -f conf$$.dir/conf$$.file
+else
+ rm -f conf$$.dir
+ mkdir conf$$.dir 2>/dev/null
+fi
+if (echo >conf$$.file) 2>/dev/null; then
+ if ln -s conf$$.file conf$$ 2>/dev/null; then
+ as_ln_s='ln -s'
+ # ... but there are two gotchas:
+ # 1) On MSYS, both `ln -s file dir' and `ln file dir' fail.
+ # 2) DJGPP < 2.04 has no symlinks; `ln -s' creates a wrapper executable.
+ # In both cases, we have to default to `cp -p'.
+ ln -s conf$$.file conf$$.dir 2>/dev/null && test ! -f conf$$.exe ||
+ as_ln_s='cp -p'
+ elif ln conf$$.file conf$$ 2>/dev/null; then
+ as_ln_s=ln
+ else
+ as_ln_s='cp -p'
+ fi
+else
+ as_ln_s='cp -p'
+fi
+rm -f conf$$ conf$$.exe conf$$.dir/conf$$.file conf$$.file
+rmdir conf$$.dir 2>/dev/null
+
+
+# as_fn_mkdir_p
+# -------------
+# Create "$as_dir" as a directory, including parents if necessary.
+as_fn_mkdir_p ()
+{
+
+ case $as_dir in #(
+ -*) as_dir=./$as_dir;;
+ esac
+ test -d "$as_dir" || eval $as_mkdir_p || {
+ as_dirs=
+ while :; do
+ case $as_dir in #(
+ *\'*) as_qdir=`$as_echo "$as_dir" | sed "s/'/'\\\\\\\\''/g"`;; #'(
+ *) as_qdir=$as_dir;;
+ esac
+ as_dirs="'$as_qdir' $as_dirs"
+ as_dir=`$as_dirname -- "$as_dir" ||
+$as_expr X"$as_dir" : 'X\(.*[^/]\)//*[^/][^/]*/*$' \| \
+ X"$as_dir" : 'X\(//\)[^/]' \| \
+ X"$as_dir" : 'X\(//\)$' \| \
+ X"$as_dir" : 'X\(/\)' \| . 2>/dev/null ||
+$as_echo X"$as_dir" |
+ sed '/^X\(.*[^/]\)\/\/*[^/][^/]*\/*$/{
+ s//\1/
+ q
+ }
+ /^X\(\/\/\)[^/].*/{
+ s//\1/
+ q
+ }
+ /^X\(\/\/\)$/{
+ s//\1/
+ q
+ }
+ /^X\(\/\).*/{
+ s//\1/
+ q
+ }
+ s/.*/./; q'`
+ test -d "$as_dir" && break
+ done
+ test -z "$as_dirs" || eval "mkdir $as_dirs"
+ } || test -d "$as_dir" || as_fn_error "cannot create directory $as_dir"
+
+
+} # as_fn_mkdir_p
+if mkdir -p . 2>/dev/null; then
+ as_mkdir_p='mkdir -p "$as_dir"'
+else
+ test -d ./-p && rmdir ./-p
+ as_mkdir_p=false
+fi
+
+if test -x / >/dev/null 2>&1; then
+ as_test_x='test -x'
+else
+ if ls -dL / >/dev/null 2>&1; then
+ as_ls_L_option=L
+ else
+ as_ls_L_option=
+ fi
+ as_test_x='
+ eval sh -c '\''
+ if test -d "$1"; then
+ test -d "$1/.";
+ else
+ case $1 in #(
+ -*)set "./$1";;
+ esac;
+ case `ls -ld'$as_ls_L_option' "$1" 2>/dev/null` in #((
+ ???[sx]*):;;*)false;;esac;fi
+ '\'' sh
+ '
+fi
+as_executable_p=$as_test_x
+
+# Sed expression to map a string onto a valid CPP name.
+as_tr_cpp="eval sed 'y%*$as_cr_letters%P$as_cr_LETTERS%;s%[^_$as_cr_alnum]%_%g'"
+
+# Sed expression to map a string onto a valid variable name.
+as_tr_sh="eval sed 'y%*+%pp%;s%[^_$as_cr_alnum]%_%g'"
+
+
+exec 6>&1
+## ----------------------------------- ##
+## Main body of $CONFIG_STATUS script. ##
+## ----------------------------------- ##
+_ASEOF
+test $as_write_fail = 0 && chmod +x $CONFIG_STATUS || ac_write_fail=1
+
+cat >>$CONFIG_STATUS <<\_ACEOF || ac_write_fail=1
+# Save the log message, to keep $0 and so on meaningful, and to
+# report actual input values of CONFIG_FILES etc. instead of their
+# values after options handling.
+ac_log="
+This file was extended by XZ Utils $as_me 4.999.9beta, which was
+generated by GNU Autoconf 2.64. Invocation command line was
+
+ CONFIG_FILES = $CONFIG_FILES
+ CONFIG_HEADERS = $CONFIG_HEADERS
+ CONFIG_LINKS = $CONFIG_LINKS
+ CONFIG_COMMANDS = $CONFIG_COMMANDS
+ $ $0 $@
+
+on `(hostname || uname -n) 2>/dev/null | sed 1q`
+"
+
+_ACEOF
+
+case $ac_config_files in *"
+"*) set x $ac_config_files; shift; ac_config_files=$*;;
+esac
+
+case $ac_config_headers in *"
+"*) set x $ac_config_headers; shift; ac_config_headers=$*;;
+esac
+
+
+cat >>$CONFIG_STATUS <<_ACEOF || ac_write_fail=1
+# Files that config.status was made for.
+config_files="$ac_config_files"
+config_headers="$ac_config_headers"
+config_commands="$ac_config_commands"
+
+_ACEOF
+
+cat >>$CONFIG_STATUS <<\_ACEOF || ac_write_fail=1
+ac_cs_usage="\
+\`$as_me' instantiates files and other configuration actions
+from templates according to the current configuration. Unless the files
+and actions are specified as TAGs, all are instantiated by default.
+
+Usage: $0 [OPTION]... [TAG]...
+
+ -h, --help print this help, then exit
+ -V, --version print version number and configuration settings, then exit
+ -q, --quiet, --silent
+ do not print progress messages
+ -d, --debug don't remove temporary files
+ --recheck update $as_me by reconfiguring in the same conditions
+ --file=FILE[:TEMPLATE]
+ instantiate the configuration file FILE
+ --header=FILE[:TEMPLATE]
+ instantiate the configuration header FILE
+
+Configuration files:
+$config_files
+
+Configuration headers:
+$config_headers
+
+Configuration commands:
+$config_commands
+
+Report bugs to <lasse.collin@tukaani.org>."
+
+_ACEOF
+cat >>$CONFIG_STATUS <<_ACEOF || ac_write_fail=1
+ac_cs_version="\\
+XZ Utils config.status 4.999.9beta
+configured by $0, generated by GNU Autoconf 2.64,
+ with options \\"`$as_echo "$ac_configure_args" | sed 's/^ //; s/[\\""\`\$]/\\\\&/g'`\\"
+
+Copyright (C) 2009 Free Software Foundation, Inc.
+This config.status script is free software; the Free Software Foundation
+gives unlimited permission to copy, distribute and modify it."
+
+ac_pwd='$ac_pwd'
+srcdir='$srcdir'
+INSTALL='$INSTALL'
+MKDIR_P='$MKDIR_P'
+AWK='$AWK'
+test -n "\$AWK" || AWK=awk
+_ACEOF
+
+cat >>$CONFIG_STATUS <<\_ACEOF || ac_write_fail=1
+# The default lists apply if the user does not specify any file.
+ac_need_defaults=:
+while test $# != 0
+do
+ case $1 in
+ --*=*)
+ ac_option=`expr "X$1" : 'X\([^=]*\)='`
+ ac_optarg=`expr "X$1" : 'X[^=]*=\(.*\)'`
+ ac_shift=:
+ ;;
+ *)
+ ac_option=$1
+ ac_optarg=$2
+ ac_shift=shift
+ ;;
+ esac
+
+ case $ac_option in
+ # Handling of the options.
+ -recheck | --recheck | --rechec | --reche | --rech | --rec | --re | --r)
+ ac_cs_recheck=: ;;
+ --version | --versio | --versi | --vers | --ver | --ve | --v | -V )
+ $as_echo "$ac_cs_version"; exit ;;
+ --debug | --debu | --deb | --de | --d | -d )
+ debug=: ;;
+ --file | --fil | --fi | --f )
+ $ac_shift
+ case $ac_optarg in
+ *\'*) ac_optarg=`$as_echo "$ac_optarg" | sed "s/'/'\\\\\\\\''/g"` ;;
+ esac
+ as_fn_append CONFIG_FILES " '$ac_optarg'"
+ ac_need_defaults=false;;
+ --header | --heade | --head | --hea )
+ $ac_shift
+ case $ac_optarg in
+ *\'*) ac_optarg=`$as_echo "$ac_optarg" | sed "s/'/'\\\\\\\\''/g"` ;;
+ esac
+ as_fn_append CONFIG_HEADERS " '$ac_optarg'"
+ ac_need_defaults=false;;
+ --he | --h)
+ # Conflict between --help and --header
+ as_fn_error "ambiguous option: \`$1'
+Try \`$0 --help' for more information.";;
+ --help | --hel | -h )
+ $as_echo "$ac_cs_usage"; exit ;;
+ -q | -quiet | --quiet | --quie | --qui | --qu | --q \
+ | -silent | --silent | --silen | --sile | --sil | --si | --s)
+ ac_cs_silent=: ;;
+
+ # This is an error.
+ -*) as_fn_error "unrecognized option: \`$1'
+Try \`$0 --help' for more information." ;;
+
+ *) as_fn_append ac_config_targets " $1"
+ ac_need_defaults=false ;;
+
+ esac
+ shift
+done
+
+ac_configure_extra_args=
+
+if $ac_cs_silent; then
+ exec 6>/dev/null
+ ac_configure_extra_args="$ac_configure_extra_args --silent"
+fi
+
+_ACEOF
+cat >>$CONFIG_STATUS <<_ACEOF || ac_write_fail=1
+if \$ac_cs_recheck; then
+ set X '$SHELL' '$0' $ac_configure_args \$ac_configure_extra_args --no-create --no-recursion
+ shift
+ \$as_echo "running CONFIG_SHELL=$SHELL \$*" >&6
+ CONFIG_SHELL='$SHELL'
+ export CONFIG_SHELL
+ exec "\$@"
+fi
+
+_ACEOF
+cat >>$CONFIG_STATUS <<\_ACEOF || ac_write_fail=1
+exec 5>>config.log
+{
+ echo
+ sed 'h;s/./-/g;s/^.../## /;s/...$/ ##/;p;x;p;x' <<_ASBOX
+## Running $as_me. ##
+_ASBOX
+ $as_echo "$ac_log"
+} >&5
+
+_ACEOF
+cat >>$CONFIG_STATUS <<_ACEOF || ac_write_fail=1
+#
+# INIT-COMMANDS
+#
+AMDEP_TRUE="$AMDEP_TRUE" ac_aux_dir="$ac_aux_dir"
+
+
+# The HP-UX ksh and POSIX shell print the target directory to stdout
+# if CDPATH is set.
+(unset CDPATH) >/dev/null 2>&1 && unset CDPATH
+
+sed_quote_subst='$sed_quote_subst'
+double_quote_subst='$double_quote_subst'
+delay_variable_subst='$delay_variable_subst'
+macro_version='`$ECHO "X$macro_version" | $Xsed -e "$delay_single_quote_subst"`'
+macro_revision='`$ECHO "X$macro_revision" | $Xsed -e "$delay_single_quote_subst"`'
+AS='`$ECHO "X$AS" | $Xsed -e "$delay_single_quote_subst"`'
+DLLTOOL='`$ECHO "X$DLLTOOL" | $Xsed -e "$delay_single_quote_subst"`'
+OBJDUMP='`$ECHO "X$OBJDUMP" | $Xsed -e "$delay_single_quote_subst"`'
+enable_shared='`$ECHO "X$enable_shared" | $Xsed -e "$delay_single_quote_subst"`'
+enable_static='`$ECHO "X$enable_static" | $Xsed -e "$delay_single_quote_subst"`'
+pic_mode='`$ECHO "X$pic_mode" | $Xsed -e "$delay_single_quote_subst"`'
+enable_fast_install='`$ECHO "X$enable_fast_install" | $Xsed -e "$delay_single_quote_subst"`'
+host_alias='`$ECHO "X$host_alias" | $Xsed -e "$delay_single_quote_subst"`'
+host='`$ECHO "X$host" | $Xsed -e "$delay_single_quote_subst"`'
+host_os='`$ECHO "X$host_os" | $Xsed -e "$delay_single_quote_subst"`'
+build_alias='`$ECHO "X$build_alias" | $Xsed -e "$delay_single_quote_subst"`'
+build='`$ECHO "X$build" | $Xsed -e "$delay_single_quote_subst"`'
+build_os='`$ECHO "X$build_os" | $Xsed -e "$delay_single_quote_subst"`'
+SED='`$ECHO "X$SED" | $Xsed -e "$delay_single_quote_subst"`'
+Xsed='`$ECHO "X$Xsed" | $Xsed -e "$delay_single_quote_subst"`'
+GREP='`$ECHO "X$GREP" | $Xsed -e "$delay_single_quote_subst"`'
+EGREP='`$ECHO "X$EGREP" | $Xsed -e "$delay_single_quote_subst"`'
+FGREP='`$ECHO "X$FGREP" | $Xsed -e "$delay_single_quote_subst"`'
+LD='`$ECHO "X$LD" | $Xsed -e "$delay_single_quote_subst"`'
+NM='`$ECHO "X$NM" | $Xsed -e "$delay_single_quote_subst"`'
+LN_S='`$ECHO "X$LN_S" | $Xsed -e "$delay_single_quote_subst"`'
+max_cmd_len='`$ECHO "X$max_cmd_len" | $Xsed -e "$delay_single_quote_subst"`'
+ac_objext='`$ECHO "X$ac_objext" | $Xsed -e "$delay_single_quote_subst"`'
+exeext='`$ECHO "X$exeext" | $Xsed -e "$delay_single_quote_subst"`'
+lt_unset='`$ECHO "X$lt_unset" | $Xsed -e "$delay_single_quote_subst"`'
+lt_SP2NL='`$ECHO "X$lt_SP2NL" | $Xsed -e "$delay_single_quote_subst"`'
+lt_NL2SP='`$ECHO "X$lt_NL2SP" | $Xsed -e "$delay_single_quote_subst"`'
+reload_flag='`$ECHO "X$reload_flag" | $Xsed -e "$delay_single_quote_subst"`'
+reload_cmds='`$ECHO "X$reload_cmds" | $Xsed -e "$delay_single_quote_subst"`'
+deplibs_check_method='`$ECHO "X$deplibs_check_method" | $Xsed -e "$delay_single_quote_subst"`'
+file_magic_cmd='`$ECHO "X$file_magic_cmd" | $Xsed -e "$delay_single_quote_subst"`'
+AR='`$ECHO "X$AR" | $Xsed -e "$delay_single_quote_subst"`'
+AR_FLAGS='`$ECHO "X$AR_FLAGS" | $Xsed -e "$delay_single_quote_subst"`'
+STRIP='`$ECHO "X$STRIP" | $Xsed -e "$delay_single_quote_subst"`'
+RANLIB='`$ECHO "X$RANLIB" | $Xsed -e "$delay_single_quote_subst"`'
+old_postinstall_cmds='`$ECHO "X$old_postinstall_cmds" | $Xsed -e "$delay_single_quote_subst"`'
+old_postuninstall_cmds='`$ECHO "X$old_postuninstall_cmds" | $Xsed -e "$delay_single_quote_subst"`'
+old_archive_cmds='`$ECHO "X$old_archive_cmds" | $Xsed -e "$delay_single_quote_subst"`'
+CC='`$ECHO "X$CC" | $Xsed -e "$delay_single_quote_subst"`'
+CFLAGS='`$ECHO "X$CFLAGS" | $Xsed -e "$delay_single_quote_subst"`'
+compiler='`$ECHO "X$compiler" | $Xsed -e "$delay_single_quote_subst"`'
+GCC='`$ECHO "X$GCC" | $Xsed -e "$delay_single_quote_subst"`'
+lt_cv_sys_global_symbol_pipe='`$ECHO "X$lt_cv_sys_global_symbol_pipe" | $Xsed -e "$delay_single_quote_subst"`'
+lt_cv_sys_global_symbol_to_cdecl='`$ECHO "X$lt_cv_sys_global_symbol_to_cdecl" | $Xsed -e "$delay_single_quote_subst"`'
+lt_cv_sys_global_symbol_to_c_name_address='`$ECHO "X$lt_cv_sys_global_symbol_to_c_name_address" | $Xsed -e "$delay_single_quote_subst"`'
+lt_cv_sys_global_symbol_to_c_name_address_lib_prefix='`$ECHO "X$lt_cv_sys_global_symbol_to_c_name_address_lib_prefix" | $Xsed -e "$delay_single_quote_subst"`'
+objdir='`$ECHO "X$objdir" | $Xsed -e "$delay_single_quote_subst"`'
+SHELL='`$ECHO "X$SHELL" | $Xsed -e "$delay_single_quote_subst"`'
+ECHO='`$ECHO "X$ECHO" | $Xsed -e "$delay_single_quote_subst"`'
+MAGIC_CMD='`$ECHO "X$MAGIC_CMD" | $Xsed -e "$delay_single_quote_subst"`'
+lt_prog_compiler_no_builtin_flag='`$ECHO "X$lt_prog_compiler_no_builtin_flag" | $Xsed -e "$delay_single_quote_subst"`'
+lt_prog_compiler_wl='`$ECHO "X$lt_prog_compiler_wl" | $Xsed -e "$delay_single_quote_subst"`'
+lt_prog_compiler_pic='`$ECHO "X$lt_prog_compiler_pic" | $Xsed -e "$delay_single_quote_subst"`'
+lt_prog_compiler_static='`$ECHO "X$lt_prog_compiler_static" | $Xsed -e "$delay_single_quote_subst"`'
+lt_cv_prog_compiler_c_o='`$ECHO "X$lt_cv_prog_compiler_c_o" | $Xsed -e "$delay_single_quote_subst"`'
+need_locks='`$ECHO "X$need_locks" | $Xsed -e "$delay_single_quote_subst"`'
+DSYMUTIL='`$ECHO "X$DSYMUTIL" | $Xsed -e "$delay_single_quote_subst"`'
+NMEDIT='`$ECHO "X$NMEDIT" | $Xsed -e "$delay_single_quote_subst"`'
+LIPO='`$ECHO "X$LIPO" | $Xsed -e "$delay_single_quote_subst"`'
+OTOOL='`$ECHO "X$OTOOL" | $Xsed -e "$delay_single_quote_subst"`'
+OTOOL64='`$ECHO "X$OTOOL64" | $Xsed -e "$delay_single_quote_subst"`'
+libext='`$ECHO "X$libext" | $Xsed -e "$delay_single_quote_subst"`'
+shrext_cmds='`$ECHO "X$shrext_cmds" | $Xsed -e "$delay_single_quote_subst"`'
+extract_expsyms_cmds='`$ECHO "X$extract_expsyms_cmds" | $Xsed -e "$delay_single_quote_subst"`'
+archive_cmds_need_lc='`$ECHO "X$archive_cmds_need_lc" | $Xsed -e "$delay_single_quote_subst"`'
+enable_shared_with_static_runtimes='`$ECHO "X$enable_shared_with_static_runtimes" | $Xsed -e "$delay_single_quote_subst"`'
+export_dynamic_flag_spec='`$ECHO "X$export_dynamic_flag_spec" | $Xsed -e "$delay_single_quote_subst"`'
+whole_archive_flag_spec='`$ECHO "X$whole_archive_flag_spec" | $Xsed -e "$delay_single_quote_subst"`'
+compiler_needs_object='`$ECHO "X$compiler_needs_object" | $Xsed -e "$delay_single_quote_subst"`'
+old_archive_from_new_cmds='`$ECHO "X$old_archive_from_new_cmds" | $Xsed -e "$delay_single_quote_subst"`'
+old_archive_from_expsyms_cmds='`$ECHO "X$old_archive_from_expsyms_cmds" | $Xsed -e "$delay_single_quote_subst"`'
+archive_cmds='`$ECHO "X$archive_cmds" | $Xsed -e "$delay_single_quote_subst"`'
+archive_expsym_cmds='`$ECHO "X$archive_expsym_cmds" | $Xsed -e "$delay_single_quote_subst"`'
+module_cmds='`$ECHO "X$module_cmds" | $Xsed -e "$delay_single_quote_subst"`'
+module_expsym_cmds='`$ECHO "X$module_expsym_cmds" | $Xsed -e "$delay_single_quote_subst"`'
+with_gnu_ld='`$ECHO "X$with_gnu_ld" | $Xsed -e "$delay_single_quote_subst"`'
+allow_undefined_flag='`$ECHO "X$allow_undefined_flag" | $Xsed -e "$delay_single_quote_subst"`'
+no_undefined_flag='`$ECHO "X$no_undefined_flag" | $Xsed -e "$delay_single_quote_subst"`'
+hardcode_libdir_flag_spec='`$ECHO "X$hardcode_libdir_flag_spec" | $Xsed -e "$delay_single_quote_subst"`'
+hardcode_libdir_flag_spec_ld='`$ECHO "X$hardcode_libdir_flag_spec_ld" | $Xsed -e "$delay_single_quote_subst"`'
+hardcode_libdir_separator='`$ECHO "X$hardcode_libdir_separator" | $Xsed -e "$delay_single_quote_subst"`'
+hardcode_direct='`$ECHO "X$hardcode_direct" | $Xsed -e "$delay_single_quote_subst"`'
+hardcode_direct_absolute='`$ECHO "X$hardcode_direct_absolute" | $Xsed -e "$delay_single_quote_subst"`'
+hardcode_minus_L='`$ECHO "X$hardcode_minus_L" | $Xsed -e "$delay_single_quote_subst"`'
+hardcode_shlibpath_var='`$ECHO "X$hardcode_shlibpath_var" | $Xsed -e "$delay_single_quote_subst"`'
+hardcode_automatic='`$ECHO "X$hardcode_automatic" | $Xsed -e "$delay_single_quote_subst"`'
+inherit_rpath='`$ECHO "X$inherit_rpath" | $Xsed -e "$delay_single_quote_subst"`'
+link_all_deplibs='`$ECHO "X$link_all_deplibs" | $Xsed -e "$delay_single_quote_subst"`'
+fix_srcfile_path='`$ECHO "X$fix_srcfile_path" | $Xsed -e "$delay_single_quote_subst"`'
+always_export_symbols='`$ECHO "X$always_export_symbols" | $Xsed -e "$delay_single_quote_subst"`'
+export_symbols_cmds='`$ECHO "X$export_symbols_cmds" | $Xsed -e "$delay_single_quote_subst"`'
+exclude_expsyms='`$ECHO "X$exclude_expsyms" | $Xsed -e "$delay_single_quote_subst"`'
+include_expsyms='`$ECHO "X$include_expsyms" | $Xsed -e "$delay_single_quote_subst"`'
+prelink_cmds='`$ECHO "X$prelink_cmds" | $Xsed -e "$delay_single_quote_subst"`'
+file_list_spec='`$ECHO "X$file_list_spec" | $Xsed -e "$delay_single_quote_subst"`'
+variables_saved_for_relink='`$ECHO "X$variables_saved_for_relink" | $Xsed -e "$delay_single_quote_subst"`'
+need_lib_prefix='`$ECHO "X$need_lib_prefix" | $Xsed -e "$delay_single_quote_subst"`'
+need_version='`$ECHO "X$need_version" | $Xsed -e "$delay_single_quote_subst"`'
+version_type='`$ECHO "X$version_type" | $Xsed -e "$delay_single_quote_subst"`'
+runpath_var='`$ECHO "X$runpath_var" | $Xsed -e "$delay_single_quote_subst"`'
+shlibpath_var='`$ECHO "X$shlibpath_var" | $Xsed -e "$delay_single_quote_subst"`'
+shlibpath_overrides_runpath='`$ECHO "X$shlibpath_overrides_runpath" | $Xsed -e "$delay_single_quote_subst"`'
+libname_spec='`$ECHO "X$libname_spec" | $Xsed -e "$delay_single_quote_subst"`'
+library_names_spec='`$ECHO "X$library_names_spec" | $Xsed -e "$delay_single_quote_subst"`'
+soname_spec='`$ECHO "X$soname_spec" | $Xsed -e "$delay_single_quote_subst"`'
+postinstall_cmds='`$ECHO "X$postinstall_cmds" | $Xsed -e "$delay_single_quote_subst"`'
+postuninstall_cmds='`$ECHO "X$postuninstall_cmds" | $Xsed -e "$delay_single_quote_subst"`'
+finish_cmds='`$ECHO "X$finish_cmds" | $Xsed -e "$delay_single_quote_subst"`'
+finish_eval='`$ECHO "X$finish_eval" | $Xsed -e "$delay_single_quote_subst"`'
+hardcode_into_libs='`$ECHO "X$hardcode_into_libs" | $Xsed -e "$delay_single_quote_subst"`'
+sys_lib_search_path_spec='`$ECHO "X$sys_lib_search_path_spec" | $Xsed -e "$delay_single_quote_subst"`'
+sys_lib_dlsearch_path_spec='`$ECHO "X$sys_lib_dlsearch_path_spec" | $Xsed -e "$delay_single_quote_subst"`'
+hardcode_action='`$ECHO "X$hardcode_action" | $Xsed -e "$delay_single_quote_subst"`'
+enable_dlopen='`$ECHO "X$enable_dlopen" | $Xsed -e "$delay_single_quote_subst"`'
+enable_dlopen_self='`$ECHO "X$enable_dlopen_self" | $Xsed -e "$delay_single_quote_subst"`'
+enable_dlopen_self_static='`$ECHO "X$enable_dlopen_self_static" | $Xsed -e "$delay_single_quote_subst"`'
+old_striplib='`$ECHO "X$old_striplib" | $Xsed -e "$delay_single_quote_subst"`'
+striplib='`$ECHO "X$striplib" | $Xsed -e "$delay_single_quote_subst"`'
+LD_RC='`$ECHO "X$LD_RC" | $Xsed -e "$delay_single_quote_subst"`'
+old_archive_cmds_RC='`$ECHO "X$old_archive_cmds_RC" | $Xsed -e "$delay_single_quote_subst"`'
+compiler_RC='`$ECHO "X$compiler_RC" | $Xsed -e "$delay_single_quote_subst"`'
+GCC_RC='`$ECHO "X$GCC_RC" | $Xsed -e "$delay_single_quote_subst"`'
+lt_prog_compiler_no_builtin_flag_RC='`$ECHO "X$lt_prog_compiler_no_builtin_flag_RC" | $Xsed -e "$delay_single_quote_subst"`'
+lt_prog_compiler_wl_RC='`$ECHO "X$lt_prog_compiler_wl_RC" | $Xsed -e "$delay_single_quote_subst"`'
+lt_prog_compiler_pic_RC='`$ECHO "X$lt_prog_compiler_pic_RC" | $Xsed -e "$delay_single_quote_subst"`'
+lt_prog_compiler_static_RC='`$ECHO "X$lt_prog_compiler_static_RC" | $Xsed -e "$delay_single_quote_subst"`'
+lt_cv_prog_compiler_c_o_RC='`$ECHO "X$lt_cv_prog_compiler_c_o_RC" | $Xsed -e "$delay_single_quote_subst"`'
+archive_cmds_need_lc_RC='`$ECHO "X$archive_cmds_need_lc_RC" | $Xsed -e "$delay_single_quote_subst"`'
+enable_shared_with_static_runtimes_RC='`$ECHO "X$enable_shared_with_static_runtimes_RC" | $Xsed -e "$delay_single_quote_subst"`'
+export_dynamic_flag_spec_RC='`$ECHO "X$export_dynamic_flag_spec_RC" | $Xsed -e "$delay_single_quote_subst"`'
+whole_archive_flag_spec_RC='`$ECHO "X$whole_archive_flag_spec_RC" | $Xsed -e "$delay_single_quote_subst"`'
+compiler_needs_object_RC='`$ECHO "X$compiler_needs_object_RC" | $Xsed -e "$delay_single_quote_subst"`'
+old_archive_from_new_cmds_RC='`$ECHO "X$old_archive_from_new_cmds_RC" | $Xsed -e "$delay_single_quote_subst"`'
+old_archive_from_expsyms_cmds_RC='`$ECHO "X$old_archive_from_expsyms_cmds_RC" | $Xsed -e "$delay_single_quote_subst"`'
+archive_cmds_RC='`$ECHO "X$archive_cmds_RC" | $Xsed -e "$delay_single_quote_subst"`'
+archive_expsym_cmds_RC='`$ECHO "X$archive_expsym_cmds_RC" | $Xsed -e "$delay_single_quote_subst"`'
+module_cmds_RC='`$ECHO "X$module_cmds_RC" | $Xsed -e "$delay_single_quote_subst"`'
+module_expsym_cmds_RC='`$ECHO "X$module_expsym_cmds_RC" | $Xsed -e "$delay_single_quote_subst"`'
+with_gnu_ld_RC='`$ECHO "X$with_gnu_ld_RC" | $Xsed -e "$delay_single_quote_subst"`'
+allow_undefined_flag_RC='`$ECHO "X$allow_undefined_flag_RC" | $Xsed -e "$delay_single_quote_subst"`'
+no_undefined_flag_RC='`$ECHO "X$no_undefined_flag_RC" | $Xsed -e "$delay_single_quote_subst"`'
+hardcode_libdir_flag_spec_RC='`$ECHO "X$hardcode_libdir_flag_spec_RC" | $Xsed -e "$delay_single_quote_subst"`'
+hardcode_libdir_flag_spec_ld_RC='`$ECHO "X$hardcode_libdir_flag_spec_ld_RC" | $Xsed -e "$delay_single_quote_subst"`'
+hardcode_libdir_separator_RC='`$ECHO "X$hardcode_libdir_separator_RC" | $Xsed -e "$delay_single_quote_subst"`'
+hardcode_direct_RC='`$ECHO "X$hardcode_direct_RC" | $Xsed -e "$delay_single_quote_subst"`'
+hardcode_direct_absolute_RC='`$ECHO "X$hardcode_direct_absolute_RC" | $Xsed -e "$delay_single_quote_subst"`'
+hardcode_minus_L_RC='`$ECHO "X$hardcode_minus_L_RC" | $Xsed -e "$delay_single_quote_subst"`'
+hardcode_shlibpath_var_RC='`$ECHO "X$hardcode_shlibpath_var_RC" | $Xsed -e "$delay_single_quote_subst"`'
+hardcode_automatic_RC='`$ECHO "X$hardcode_automatic_RC" | $Xsed -e "$delay_single_quote_subst"`'
+inherit_rpath_RC='`$ECHO "X$inherit_rpath_RC" | $Xsed -e "$delay_single_quote_subst"`'
+link_all_deplibs_RC='`$ECHO "X$link_all_deplibs_RC" | $Xsed -e "$delay_single_quote_subst"`'
+fix_srcfile_path_RC='`$ECHO "X$fix_srcfile_path_RC" | $Xsed -e "$delay_single_quote_subst"`'
+always_export_symbols_RC='`$ECHO "X$always_export_symbols_RC" | $Xsed -e "$delay_single_quote_subst"`'
+export_symbols_cmds_RC='`$ECHO "X$export_symbols_cmds_RC" | $Xsed -e "$delay_single_quote_subst"`'
+exclude_expsyms_RC='`$ECHO "X$exclude_expsyms_RC" | $Xsed -e "$delay_single_quote_subst"`'
+include_expsyms_RC='`$ECHO "X$include_expsyms_RC" | $Xsed -e "$delay_single_quote_subst"`'
+prelink_cmds_RC='`$ECHO "X$prelink_cmds_RC" | $Xsed -e "$delay_single_quote_subst"`'
+file_list_spec_RC='`$ECHO "X$file_list_spec_RC" | $Xsed -e "$delay_single_quote_subst"`'
+hardcode_action_RC='`$ECHO "X$hardcode_action_RC" | $Xsed -e "$delay_single_quote_subst"`'
+
+LTCC='$LTCC'
+LTCFLAGS='$LTCFLAGS'
+compiler='$compiler_DEFAULT'
+
+# Quote evaled strings.
+for var in SED \
+GREP \
+EGREP \
+FGREP \
+LD \
+NM \
+LN_S \
+lt_SP2NL \
+lt_NL2SP \
+reload_flag \
+deplibs_check_method \
+file_magic_cmd \
+AR \
+AR_FLAGS \
+STRIP \
+RANLIB \
+CC \
+CFLAGS \
+compiler \
+lt_cv_sys_global_symbol_pipe \
+lt_cv_sys_global_symbol_to_cdecl \
+lt_cv_sys_global_symbol_to_c_name_address \
+lt_cv_sys_global_symbol_to_c_name_address_lib_prefix \
+SHELL \
+ECHO \
+lt_prog_compiler_no_builtin_flag \
+lt_prog_compiler_wl \
+lt_prog_compiler_pic \
+lt_prog_compiler_static \
+lt_cv_prog_compiler_c_o \
+need_locks \
+DSYMUTIL \
+NMEDIT \
+LIPO \
+OTOOL \
+OTOOL64 \
+shrext_cmds \
+export_dynamic_flag_spec \
+whole_archive_flag_spec \
+compiler_needs_object \
+with_gnu_ld \
+allow_undefined_flag \
+no_undefined_flag \
+hardcode_libdir_flag_spec \
+hardcode_libdir_flag_spec_ld \
+hardcode_libdir_separator \
+fix_srcfile_path \
+exclude_expsyms \
+include_expsyms \
+file_list_spec \
+variables_saved_for_relink \
+libname_spec \
+library_names_spec \
+soname_spec \
+finish_eval \
+old_striplib \
+striplib \
+LD_RC \
+compiler_RC \
+lt_prog_compiler_no_builtin_flag_RC \
+lt_prog_compiler_wl_RC \
+lt_prog_compiler_pic_RC \
+lt_prog_compiler_static_RC \
+lt_cv_prog_compiler_c_o_RC \
+export_dynamic_flag_spec_RC \
+whole_archive_flag_spec_RC \
+compiler_needs_object_RC \
+with_gnu_ld_RC \
+allow_undefined_flag_RC \
+no_undefined_flag_RC \
+hardcode_libdir_flag_spec_RC \
+hardcode_libdir_flag_spec_ld_RC \
+hardcode_libdir_separator_RC \
+fix_srcfile_path_RC \
+exclude_expsyms_RC \
+include_expsyms_RC \
+file_list_spec_RC; do
+ case \`eval \\\\\$ECHO "X\\\\\$\$var"\` in
+ *[\\\\\\\`\\"\\\$]*)
+ eval "lt_\$var=\\\\\\"\\\`\\\$ECHO \\"X\\\$\$var\\" | \\\$Xsed -e \\"\\\$sed_quote_subst\\"\\\`\\\\\\""
+ ;;
+ *)
+ eval "lt_\$var=\\\\\\"\\\$\$var\\\\\\""
+ ;;
+ esac
+done
+
+# Double-quote double-evaled strings.
+for var in reload_cmds \
+old_postinstall_cmds \
+old_postuninstall_cmds \
+old_archive_cmds \
+extract_expsyms_cmds \
+old_archive_from_new_cmds \
+old_archive_from_expsyms_cmds \
+archive_cmds \
+archive_expsym_cmds \
+module_cmds \
+module_expsym_cmds \
+export_symbols_cmds \
+prelink_cmds \
+postinstall_cmds \
+postuninstall_cmds \
+finish_cmds \
+sys_lib_search_path_spec \
+sys_lib_dlsearch_path_spec \
+old_archive_cmds_RC \
+old_archive_from_new_cmds_RC \
+old_archive_from_expsyms_cmds_RC \
+archive_cmds_RC \
+archive_expsym_cmds_RC \
+module_cmds_RC \
+module_expsym_cmds_RC \
+export_symbols_cmds_RC \
+prelink_cmds_RC; do
+ case \`eval \\\\\$ECHO "X\\\\\$\$var"\` in
+ *[\\\\\\\`\\"\\\$]*)
+ eval "lt_\$var=\\\\\\"\\\`\\\$ECHO \\"X\\\$\$var\\" | \\\$Xsed -e \\"\\\$double_quote_subst\\" -e \\"\\\$sed_quote_subst\\" -e \\"\\\$delay_variable_subst\\"\\\`\\\\\\""
+ ;;
+ *)
+ eval "lt_\$var=\\\\\\"\\\$\$var\\\\\\""
+ ;;
+ esac
+done
+
+# Fix-up fallback echo if it was mangled by the above quoting rules.
+case \$lt_ECHO in
+*'\\\$0 --fallback-echo"') lt_ECHO=\`\$ECHO "X\$lt_ECHO" | \$Xsed -e 's/\\\\\\\\\\\\\\\$0 --fallback-echo"\$/\$0 --fallback-echo"/'\`
+ ;;
+esac
+
+ac_aux_dir='$ac_aux_dir'
+xsi_shell='$xsi_shell'
+lt_shell_append='$lt_shell_append'
+
+# See if we are running on zsh, and set the options which allow our
+# commands through without removal of \ escapes INIT.
+if test -n "\${ZSH_VERSION+set}" ; then
+ setopt NO_GLOB_SUBST
+fi
+
+
+ PACKAGE='$PACKAGE'
+ VERSION='$VERSION'
+ TIMESTAMP='$TIMESTAMP'
+ RM='$RM'
+ ofile='$ofile'
+
+
+
+
+
+# Capture the value of obsolete ALL_LINGUAS because we need it to compute
+ # POFILES, UPDATEPOFILES, DUMMYPOFILES, GMOFILES, CATALOGS. But hide it
+ # from automake < 1.5.
+ eval 'OBSOLETE_ALL_LINGUAS''="$ALL_LINGUAS"'
+ # Capture the value of LINGUAS because we need it to compute CATALOGS.
+ LINGUAS="${LINGUAS-%UNSET%}"
+
+
+_ACEOF
+
+cat >>$CONFIG_STATUS <<\_ACEOF || ac_write_fail=1
+
+# Handling of arguments.
+for ac_config_target in $ac_config_targets
+do
+ case $ac_config_target in
+ "config.h") CONFIG_HEADERS="$CONFIG_HEADERS config.h" ;;
+ "depfiles") CONFIG_COMMANDS="$CONFIG_COMMANDS depfiles" ;;
+ "libtool") CONFIG_COMMANDS="$CONFIG_COMMANDS libtool" ;;
+ "po-directories") CONFIG_COMMANDS="$CONFIG_COMMANDS po-directories" ;;
+ "Doxyfile") CONFIG_FILES="$CONFIG_FILES Doxyfile" ;;
+ "Makefile") CONFIG_FILES="$CONFIG_FILES Makefile" ;;
+ "po/Makefile.in") CONFIG_FILES="$CONFIG_FILES po/Makefile.in" ;;
+ "lib/Makefile") CONFIG_FILES="$CONFIG_FILES lib/Makefile" ;;
+ "src/Makefile") CONFIG_FILES="$CONFIG_FILES src/Makefile" ;;
+ "src/liblzma/liblzma.pc") CONFIG_FILES="$CONFIG_FILES src/liblzma/liblzma.pc" ;;
+ "src/liblzma/Makefile") CONFIG_FILES="$CONFIG_FILES src/liblzma/Makefile" ;;
+ "src/liblzma/api/Makefile") CONFIG_FILES="$CONFIG_FILES src/liblzma/api/Makefile" ;;
+ "src/xz/Makefile") CONFIG_FILES="$CONFIG_FILES src/xz/Makefile" ;;
+ "src/xzdec/Makefile") CONFIG_FILES="$CONFIG_FILES src/xzdec/Makefile" ;;
+ "src/lzmainfo/Makefile") CONFIG_FILES="$CONFIG_FILES src/lzmainfo/Makefile" ;;
+ "src/scripts/Makefile") CONFIG_FILES="$CONFIG_FILES src/scripts/Makefile" ;;
+ "src/scripts/xzdiff") CONFIG_FILES="$CONFIG_FILES src/scripts/xzdiff" ;;
+ "src/scripts/xzgrep") CONFIG_FILES="$CONFIG_FILES src/scripts/xzgrep" ;;
+ "src/scripts/xzmore") CONFIG_FILES="$CONFIG_FILES src/scripts/xzmore" ;;
+ "src/scripts/xzless") CONFIG_FILES="$CONFIG_FILES src/scripts/xzless" ;;
+ "tests/Makefile") CONFIG_FILES="$CONFIG_FILES tests/Makefile" ;;
+ "debug/Makefile") CONFIG_FILES="$CONFIG_FILES debug/Makefile" ;;
+
+ *) as_fn_error "invalid argument: \`$ac_config_target'" "$LINENO" 5;;
+ esac
+done
+
+
+# If the user did not use the arguments to specify the items to instantiate,
+# then the envvar interface is used. Set only those that are not.
+# We use the long form for the default assignment because of an extremely
+# bizarre bug on SunOS 4.1.3.
+if $ac_need_defaults; then
+ test "${CONFIG_FILES+set}" = set || CONFIG_FILES=$config_files
+ test "${CONFIG_HEADERS+set}" = set || CONFIG_HEADERS=$config_headers
+ test "${CONFIG_COMMANDS+set}" = set || CONFIG_COMMANDS=$config_commands
+fi
+
+# Have a temporary directory for convenience. Make it in the build tree
+# simply because there is no reason against having it here, and in addition,
+# creating and moving files from /tmp can sometimes cause problems.
+# Hook for its removal unless debugging.
+# Note that there is a small window in which the directory will not be cleaned:
+# after its creation but before its name has been assigned to `$tmp'.
+$debug ||
+{
+ tmp=
+ trap 'exit_status=$?
+ { test -z "$tmp" || test ! -d "$tmp" || rm -fr "$tmp"; } && exit $exit_status
+' 0
+ trap 'as_fn_exit 1' 1 2 13 15
+}
+# Create a (secure) tmp directory for tmp files.
+
+{
+ tmp=`(umask 077 && mktemp -d "./confXXXXXX") 2>/dev/null` &&
+ test -n "$tmp" && test -d "$tmp"
+} ||
+{
+ tmp=./conf$$-$RANDOM
+ (umask 077 && mkdir "$tmp")
+} || as_fn_error "cannot create a temporary directory in ." "$LINENO" 5
+
+# Set up the scripts for CONFIG_FILES section.
+# No need to generate them if there are no CONFIG_FILES.
+# This happens for instance with `./config.status config.h'.
+if test -n "$CONFIG_FILES"; then
+
+
+ac_cr=`echo X | tr X '\015'`
+# On cygwin, bash can eat \r inside `` if the user requested igncr.
+# But we know of no other shell where ac_cr would be empty at this
+# point, so we can use a bashism as a fallback.
+if test "x$ac_cr" = x; then
+ eval ac_cr=\$\'\\r\'
+fi
+ac_cs_awk_cr=`$AWK 'BEGIN { print "a\rb" }' </dev/null 2>/dev/null`
+if test "$ac_cs_awk_cr" = "a${ac_cr}b"; then
+ ac_cs_awk_cr='\r'
+else
+ ac_cs_awk_cr=$ac_cr
+fi
+
+echo 'BEGIN {' >"$tmp/subs1.awk" &&
+_ACEOF
+
+
+{
+ echo "cat >conf$$subs.awk <<_ACEOF" &&
+ echo "$ac_subst_vars" | sed 's/.*/&!$&$ac_delim/' &&
+ echo "_ACEOF"
+} >conf$$subs.sh ||
+ as_fn_error "could not make $CONFIG_STATUS" "$LINENO" 5
+ac_delim_num=`echo "$ac_subst_vars" | grep -c '$'`
+ac_delim='%!_!# '
+for ac_last_try in false false false false false :; do
+ . ./conf$$subs.sh ||
+ as_fn_error "could not make $CONFIG_STATUS" "$LINENO" 5
+
+ ac_delim_n=`sed -n "s/.*$ac_delim\$/X/p" conf$$subs.awk | grep -c X`
+ if test $ac_delim_n = $ac_delim_num; then
+ break
+ elif $ac_last_try; then
+ as_fn_error "could not make $CONFIG_STATUS" "$LINENO" 5
+ else
+ ac_delim="$ac_delim!$ac_delim _$ac_delim!! "
+ fi
+done
+rm -f conf$$subs.sh
+
+cat >>$CONFIG_STATUS <<_ACEOF || ac_write_fail=1
+cat >>"\$tmp/subs1.awk" <<\\_ACAWK &&
+_ACEOF
+sed -n '
+h
+s/^/S["/; s/!.*/"]=/
+p
+g
+s/^[^!]*!//
+:repl
+t repl
+s/'"$ac_delim"'$//
+t delim
+:nl
+h
+s/\(.\{148\}\).*/\1/
+t more1
+s/["\\]/\\&/g; s/^/"/; s/$/\\n"\\/
+p
+n
+b repl
+:more1
+s/["\\]/\\&/g; s/^/"/; s/$/"\\/
+p
+g
+s/.\{148\}//
+t nl
+:delim
+h
+s/\(.\{148\}\).*/\1/
+t more2
+s/["\\]/\\&/g; s/^/"/; s/$/"/
+p
+b
+:more2
+s/["\\]/\\&/g; s/^/"/; s/$/"\\/
+p
+g
+s/.\{148\}//
+t delim
+' <conf$$subs.awk | sed '
+/^[^""]/{
+ N
+ s/\n//
+}
+' >>$CONFIG_STATUS || ac_write_fail=1
+rm -f conf$$subs.awk
+cat >>$CONFIG_STATUS <<_ACEOF || ac_write_fail=1
+_ACAWK
+cat >>"\$tmp/subs1.awk" <<_ACAWK &&
+ for (key in S) S_is_set[key] = 1
+ FS = ""
+
+}
+{
+ line = $ 0
+ nfields = split(line, field, "@")
+ substed = 0
+ len = length(field[1])
+ for (i = 2; i < nfields; i++) {
+ key = field[i]
+ keylen = length(key)
+ if (S_is_set[key]) {
+ value = S[key]
+ line = substr(line, 1, len) "" value "" substr(line, len + keylen + 3)
+ len += length(value) + length(field[++i])
+ substed = 1
+ } else
+ len += 1 + keylen
+ }
+
+ print line
+}
+
+_ACAWK
+_ACEOF
+cat >>$CONFIG_STATUS <<\_ACEOF || ac_write_fail=1
+if sed "s/$ac_cr//" < /dev/null > /dev/null 2>&1; then
+ sed "s/$ac_cr\$//; s/$ac_cr/$ac_cs_awk_cr/g"
+else
+ cat
+fi < "$tmp/subs1.awk" > "$tmp/subs.awk" \
+ || as_fn_error "could not setup config files machinery" "$LINENO" 5
+_ACEOF
+
+# VPATH may cause trouble with some makes, so we remove $(srcdir),
+# ${srcdir} and @srcdir@ from VPATH if srcdir is ".", strip leading and
+# trailing colons and then remove the whole line if VPATH becomes empty
+# (actually we leave an empty line to preserve line numbers).
+if test "x$srcdir" = x.; then
+ ac_vpsub='/^[ ]*VPATH[ ]*=/{
+s/:*\$(srcdir):*/:/
+s/:*\${srcdir}:*/:/
+s/:*@srcdir@:*/:/
+s/^\([^=]*=[ ]*\):*/\1/
+s/:*$//
+s/^[^=]*=[ ]*$//
+}'
+fi
+
+cat >>$CONFIG_STATUS <<\_ACEOF || ac_write_fail=1
+fi # test -n "$CONFIG_FILES"
+
+# Set up the scripts for CONFIG_HEADERS section.
+# No need to generate them if there are no CONFIG_HEADERS.
+# This happens for instance with `./config.status Makefile'.
+if test -n "$CONFIG_HEADERS"; then
+cat >"$tmp/defines.awk" <<\_ACAWK ||
+BEGIN {
+_ACEOF
+
+# Transform confdefs.h into an awk script `defines.awk', embedded as
+# here-document in config.status, that substitutes the proper values into
+# config.h.in to produce config.h.
+
+# Create a delimiter string that does not exist in confdefs.h, to ease
+# handling of long lines.
+ac_delim='%!_!# '
+for ac_last_try in false false :; do
+ ac_t=`sed -n "/$ac_delim/p" confdefs.h`
+ if test -z "$ac_t"; then
+ break
+ elif $ac_last_try; then
+ as_fn_error "could not make $CONFIG_HEADERS" "$LINENO" 5
+ else
+ ac_delim="$ac_delim!$ac_delim _$ac_delim!! "
+ fi
+done
+
+# For the awk script, D is an array of macro values keyed by name,
+# likewise P contains macro parameters if any. Preserve backslash
+# newline sequences.
+
+ac_word_re=[_$as_cr_Letters][_$as_cr_alnum]*
+sed -n '
+s/.\{148\}/&'"$ac_delim"'/g
+t rset
+:rset
+s/^[ ]*#[ ]*define[ ][ ]*/ /
+t def
+d
+:def
+s/\\$//
+t bsnl
+s/["\\]/\\&/g
+s/^ \('"$ac_word_re"'\)\(([^()]*)\)[ ]*\(.*\)/P["\1"]="\2"\
+D["\1"]=" \3"/p
+s/^ \('"$ac_word_re"'\)[ ]*\(.*\)/D["\1"]=" \2"/p
+d
+:bsnl
+s/["\\]/\\&/g
+s/^ \('"$ac_word_re"'\)\(([^()]*)\)[ ]*\(.*\)/P["\1"]="\2"\
+D["\1"]=" \3\\\\\\n"\\/p
+t cont
+s/^ \('"$ac_word_re"'\)[ ]*\(.*\)/D["\1"]=" \2\\\\\\n"\\/p
+t cont
+d
+:cont
+n
+s/.\{148\}/&'"$ac_delim"'/g
+t clear
+:clear
+s/\\$//
+t bsnlc
+s/["\\]/\\&/g; s/^/"/; s/$/"/p
+d
+:bsnlc
+s/["\\]/\\&/g; s/^/"/; s/$/\\\\\\n"\\/p
+b cont
+' <confdefs.h | sed '
+s/'"$ac_delim"'/"\\\
+"/g' >>$CONFIG_STATUS || ac_write_fail=1
+
+cat >>$CONFIG_STATUS <<_ACEOF || ac_write_fail=1
+ for (key in D) D_is_set[key] = 1
+ FS = ""
+}
+/^[\t ]*#[\t ]*(define|undef)[\t ]+$ac_word_re([\t (]|\$)/ {
+ line = \$ 0
+ split(line, arg, " ")
+ if (arg[1] == "#") {
+ defundef = arg[2]
+ mac1 = arg[3]
+ } else {
+ defundef = substr(arg[1], 2)
+ mac1 = arg[2]
+ }
+ split(mac1, mac2, "(") #)
+ macro = mac2[1]
+ prefix = substr(line, 1, index(line, defundef) - 1)
+ if (D_is_set[macro]) {
+ # Preserve the white space surrounding the "#".
+ print prefix "define", macro P[macro] D[macro]
+ next
+ } else {
+ # Replace #undef with comments. This is necessary, for example,
+ # in the case of _POSIX_SOURCE, which is predefined and required
+ # on some systems where configure will not decide to define it.
+ if (defundef == "undef") {
+ print "/*", prefix defundef, macro, "*/"
+ next
+ }
+ }
+}
+{ print }
+_ACAWK
+_ACEOF
+cat >>$CONFIG_STATUS <<\_ACEOF || ac_write_fail=1
+ as_fn_error "could not setup config headers machinery" "$LINENO" 5
+fi # test -n "$CONFIG_HEADERS"
+
+
+eval set X " :F $CONFIG_FILES :H $CONFIG_HEADERS :C $CONFIG_COMMANDS"
+shift
+for ac_tag
+do
+ case $ac_tag in
+ :[FHLC]) ac_mode=$ac_tag; continue;;
+ esac
+ case $ac_mode$ac_tag in
+ :[FHL]*:*);;
+ :L* | :C*:*) as_fn_error "invalid tag \`$ac_tag'" "$LINENO" 5;;
+ :[FH]-) ac_tag=-:-;;
+ :[FH]*) ac_tag=$ac_tag:$ac_tag.in;;
+ esac
+ ac_save_IFS=$IFS
+ IFS=:
+ set x $ac_tag
+ IFS=$ac_save_IFS
+ shift
+ ac_file=$1
+ shift
+
+ case $ac_mode in
+ :L) ac_source=$1;;
+ :[FH])
+ ac_file_inputs=
+ for ac_f
+ do
+ case $ac_f in
+ -) ac_f="$tmp/stdin";;
+ *) # Look for the file first in the build tree, then in the source tree
+ # (if the path is not absolute). The absolute path cannot be DOS-style,
+ # because $ac_f cannot contain `:'.
+ test -f "$ac_f" ||
+ case $ac_f in
+ [\\/$]*) false;;
+ *) test -f "$srcdir/$ac_f" && ac_f="$srcdir/$ac_f";;
+ esac ||
+ as_fn_error "cannot find input file: \`$ac_f'" "$LINENO" 5;;
+ esac
+ case $ac_f in *\'*) ac_f=`$as_echo "$ac_f" | sed "s/'/'\\\\\\\\''/g"`;; esac
+ as_fn_append ac_file_inputs " '$ac_f'"
+ done
+
+ # Let's still pretend it is `configure' which instantiates (i.e., don't
+ # use $as_me), people would be surprised to read:
+ # /* config.h. Generated by config.status. */
+ configure_input='Generated from '`
+ $as_echo "$*" | sed 's|^[^:]*/||;s|:[^:]*/|, |g'
+ `' by configure.'
+ if test x"$ac_file" != x-; then
+ configure_input="$ac_file. $configure_input"
+ { $as_echo "$as_me:${as_lineno-$LINENO}: creating $ac_file" >&5
+$as_echo "$as_me: creating $ac_file" >&6;}
+ fi
+ # Neutralize special characters interpreted by sed in replacement strings.
+ case $configure_input in #(
+ *\&* | *\|* | *\\* )
+ ac_sed_conf_input=`$as_echo "$configure_input" |
+ sed 's/[\\\\&|]/\\\\&/g'`;; #(
+ *) ac_sed_conf_input=$configure_input;;
+ esac
+
+ case $ac_tag in
+ *:-:* | *:-) cat >"$tmp/stdin" \
+ || as_fn_error "could not create $ac_file" "$LINENO" 5 ;;
+ esac
+ ;;
+ esac
+
+ ac_dir=`$as_dirname -- "$ac_file" ||
+$as_expr X"$ac_file" : 'X\(.*[^/]\)//*[^/][^/]*/*$' \| \
+ X"$ac_file" : 'X\(//\)[^/]' \| \
+ X"$ac_file" : 'X\(//\)$' \| \
+ X"$ac_file" : 'X\(/\)' \| . 2>/dev/null ||
+$as_echo X"$ac_file" |
+ sed '/^X\(.*[^/]\)\/\/*[^/][^/]*\/*$/{
+ s//\1/
+ q
+ }
+ /^X\(\/\/\)[^/].*/{
+ s//\1/
+ q
+ }
+ /^X\(\/\/\)$/{
+ s//\1/
+ q
+ }
+ /^X\(\/\).*/{
+ s//\1/
+ q
+ }
+ s/.*/./; q'`
+ as_dir="$ac_dir"; as_fn_mkdir_p
+ ac_builddir=.
+
+case "$ac_dir" in
+.) ac_dir_suffix= ac_top_builddir_sub=. ac_top_build_prefix= ;;
+*)
+ ac_dir_suffix=/`$as_echo "$ac_dir" | sed 's|^\.[\\/]||'`
+ # A ".." for each directory in $ac_dir_suffix.
+ ac_top_builddir_sub=`$as_echo "$ac_dir_suffix" | sed 's|/[^\\/]*|/..|g;s|/||'`
+ case $ac_top_builddir_sub in
+ "") ac_top_builddir_sub=. ac_top_build_prefix= ;;
+ *) ac_top_build_prefix=$ac_top_builddir_sub/ ;;
+ esac ;;
+esac
+ac_abs_top_builddir=$ac_pwd
+ac_abs_builddir=$ac_pwd$ac_dir_suffix
+# for backward compatibility:
+ac_top_builddir=$ac_top_build_prefix
+
+case $srcdir in
+ .) # We are building in place.
+ ac_srcdir=.
+ ac_top_srcdir=$ac_top_builddir_sub
+ ac_abs_top_srcdir=$ac_pwd ;;
+ [\\/]* | ?:[\\/]* ) # Absolute name.
+ ac_srcdir=$srcdir$ac_dir_suffix;
+ ac_top_srcdir=$srcdir
+ ac_abs_top_srcdir=$srcdir ;;
+ *) # Relative name.
+ ac_srcdir=$ac_top_build_prefix$srcdir$ac_dir_suffix
+ ac_top_srcdir=$ac_top_build_prefix$srcdir
+ ac_abs_top_srcdir=$ac_pwd/$srcdir ;;
+esac
+ac_abs_srcdir=$ac_abs_top_srcdir$ac_dir_suffix
+
+
+ case $ac_mode in
+ :F)
+ #
+ # CONFIG_FILE
+ #
+
+ case $INSTALL in
+ [\\/$]* | ?:[\\/]* ) ac_INSTALL=$INSTALL ;;
+ *) ac_INSTALL=$ac_top_build_prefix$INSTALL ;;
+ esac
+ ac_MKDIR_P=$MKDIR_P
+ case $MKDIR_P in
+ [\\/$]* | ?:[\\/]* ) ;;
+ */*) ac_MKDIR_P=$ac_top_build_prefix$MKDIR_P ;;
+ esac
+_ACEOF
+
+cat >>$CONFIG_STATUS <<\_ACEOF || ac_write_fail=1
+# If the template does not know about datarootdir, expand it.
+# FIXME: This hack should be removed a few years after 2.60.
+ac_datarootdir_hack=; ac_datarootdir_seen=
+ac_sed_dataroot='
+/datarootdir/ {
+ p
+ q
+}
+/@datadir@/p
+/@docdir@/p
+/@infodir@/p
+/@localedir@/p
+/@mandir@/p'
+case `eval "sed -n \"\$ac_sed_dataroot\" $ac_file_inputs"` in
+*datarootdir*) ac_datarootdir_seen=yes;;
+*@datadir@*|*@docdir@*|*@infodir@*|*@localedir@*|*@mandir@*)
+ { $as_echo "$as_me:${as_lineno-$LINENO}: WARNING: $ac_file_inputs seems to ignore the --datarootdir setting" >&5
+$as_echo "$as_me: WARNING: $ac_file_inputs seems to ignore the --datarootdir setting" >&2;}
+_ACEOF
+cat >>$CONFIG_STATUS <<_ACEOF || ac_write_fail=1
+ ac_datarootdir_hack='
+ s&@datadir@&$datadir&g
+ s&@docdir@&$docdir&g
+ s&@infodir@&$infodir&g
+ s&@localedir@&$localedir&g
+ s&@mandir@&$mandir&g
+ s&\\\${datarootdir}&$datarootdir&g' ;;
+esac
+_ACEOF
+
+# Neutralize VPATH when `$srcdir' = `.'.
+# Shell code in configure.ac might set extrasub.
+# FIXME: do we really want to maintain this feature?
+cat >>$CONFIG_STATUS <<_ACEOF || ac_write_fail=1
+ac_sed_extra="$ac_vpsub
+$extrasub
+_ACEOF
+cat >>$CONFIG_STATUS <<\_ACEOF || ac_write_fail=1
+:t
+/@[a-zA-Z_][a-zA-Z_0-9]*@/!b
+s|@configure_input@|$ac_sed_conf_input|;t t
+s&@top_builddir@&$ac_top_builddir_sub&;t t
+s&@top_build_prefix@&$ac_top_build_prefix&;t t
+s&@srcdir@&$ac_srcdir&;t t
+s&@abs_srcdir@&$ac_abs_srcdir&;t t
+s&@top_srcdir@&$ac_top_srcdir&;t t
+s&@abs_top_srcdir@&$ac_abs_top_srcdir&;t t
+s&@builddir@&$ac_builddir&;t t
+s&@abs_builddir@&$ac_abs_builddir&;t t
+s&@abs_top_builddir@&$ac_abs_top_builddir&;t t
+s&@INSTALL@&$ac_INSTALL&;t t
+s&@MKDIR_P@&$ac_MKDIR_P&;t t
+$ac_datarootdir_hack
+"
+eval sed \"\$ac_sed_extra\" "$ac_file_inputs" | $AWK -f "$tmp/subs.awk" >$tmp/out \
+ || as_fn_error "could not create $ac_file" "$LINENO" 5
+
+test -z "$ac_datarootdir_hack$ac_datarootdir_seen" &&
+ { ac_out=`sed -n '/\${datarootdir}/p' "$tmp/out"`; test -n "$ac_out"; } &&
+ { ac_out=`sed -n '/^[ ]*datarootdir[ ]*:*=/p' "$tmp/out"`; test -z "$ac_out"; } &&
+ { $as_echo "$as_me:${as_lineno-$LINENO}: WARNING: $ac_file contains a reference to the variable \`datarootdir'
+which seems to be undefined. Please make sure it is defined." >&5
+$as_echo "$as_me: WARNING: $ac_file contains a reference to the variable \`datarootdir'
+which seems to be undefined. Please make sure it is defined." >&2;}
+
+ rm -f "$tmp/stdin"
+ case $ac_file in
+ -) cat "$tmp/out" && rm -f "$tmp/out";;
+ *) rm -f "$ac_file" && mv "$tmp/out" "$ac_file";;
+ esac \
+ || as_fn_error "could not create $ac_file" "$LINENO" 5
+ ;;
+ :H)
+ #
+ # CONFIG_HEADER
+ #
+ if test x"$ac_file" != x-; then
+ {
+ $as_echo "/* $configure_input */" \
+ && eval '$AWK -f "$tmp/defines.awk"' "$ac_file_inputs"
+ } >"$tmp/config.h" \
+ || as_fn_error "could not create $ac_file" "$LINENO" 5
+ if diff "$ac_file" "$tmp/config.h" >/dev/null 2>&1; then
+ { $as_echo "$as_me:${as_lineno-$LINENO}: $ac_file is unchanged" >&5
+$as_echo "$as_me: $ac_file is unchanged" >&6;}
+ else
+ rm -f "$ac_file"
+ mv "$tmp/config.h" "$ac_file" \
+ || as_fn_error "could not create $ac_file" "$LINENO" 5
+ fi
+ else
+ $as_echo "/* $configure_input */" \
+ && eval '$AWK -f "$tmp/defines.awk"' "$ac_file_inputs" \
+ || as_fn_error "could not create -" "$LINENO" 5
+ fi
+# Compute "$ac_file"'s index in $config_headers.
+_am_arg="$ac_file"
+_am_stamp_count=1
+for _am_header in $config_headers :; do
+ case $_am_header in
+ $_am_arg | $_am_arg:* )
+ break ;;
+ * )
+ _am_stamp_count=`expr $_am_stamp_count + 1` ;;
+ esac
+done
+echo "timestamp for $_am_arg" >`$as_dirname -- "$_am_arg" ||
+$as_expr X"$_am_arg" : 'X\(.*[^/]\)//*[^/][^/]*/*$' \| \
+ X"$_am_arg" : 'X\(//\)[^/]' \| \
+ X"$_am_arg" : 'X\(//\)$' \| \
+ X"$_am_arg" : 'X\(/\)' \| . 2>/dev/null ||
+$as_echo X"$_am_arg" |
+ sed '/^X\(.*[^/]\)\/\/*[^/][^/]*\/*$/{
+ s//\1/
+ q
+ }
+ /^X\(\/\/\)[^/].*/{
+ s//\1/
+ q
+ }
+ /^X\(\/\/\)$/{
+ s//\1/
+ q
+ }
+ /^X\(\/\).*/{
+ s//\1/
+ q
+ }
+ s/.*/./; q'`/stamp-h$_am_stamp_count
+ ;;
+
+ :C) { $as_echo "$as_me:${as_lineno-$LINENO}: executing $ac_file commands" >&5
+$as_echo "$as_me: executing $ac_file commands" >&6;}
+ ;;
+ esac
+
+
+ case $ac_file$ac_mode in
+ "depfiles":C) test x"$AMDEP_TRUE" != x"" || {
+ # Autoconf 2.62 quotes --file arguments for eval, but not when files
+ # are listed without --file. Let's play safe and only enable the eval
+ # if we detect the quoting.
+ case $CONFIG_FILES in
+ *\'*) eval set x "$CONFIG_FILES" ;;
+ *) set x $CONFIG_FILES ;;
+ esac
+ shift
+ for mf
+ do
+ # Strip MF so we end up with the name of the file.
+ mf=`echo "$mf" | sed -e 's/:.*$//'`
+ # Check whether this is an Automake generated Makefile or not.
+ # We used to match only the files named `Makefile.in', but
+ # some people rename them; so instead we look at the file content.
+ # Grep'ing the first line is not enough: some people post-process
+ # each Makefile.in and add a new line on top of each file to say so.
+ # Grep'ing the whole file is not good either: AIX grep has a line
+ # limit of 2048, but all sed's we know have understand at least 4000.
+ if sed -n 's,^#.*generated by automake.*,X,p' "$mf" | grep X >/dev/null 2>&1; then
+ dirpart=`$as_dirname -- "$mf" ||
+$as_expr X"$mf" : 'X\(.*[^/]\)//*[^/][^/]*/*$' \| \
+ X"$mf" : 'X\(//\)[^/]' \| \
+ X"$mf" : 'X\(//\)$' \| \
+ X"$mf" : 'X\(/\)' \| . 2>/dev/null ||
+$as_echo X"$mf" |
+ sed '/^X\(.*[^/]\)\/\/*[^/][^/]*\/*$/{
+ s//\1/
+ q
+ }
+ /^X\(\/\/\)[^/].*/{
+ s//\1/
+ q
+ }
+ /^X\(\/\/\)$/{
+ s//\1/
+ q
+ }
+ /^X\(\/\).*/{
+ s//\1/
+ q
+ }
+ s/.*/./; q'`
+ else
+ continue
+ fi
+ # Extract the definition of DEPDIR, am__include, and am__quote
+ # from the Makefile without running `make'.
+ DEPDIR=`sed -n 's/^DEPDIR = //p' < "$mf"`
+ test -z "$DEPDIR" && continue
+ am__include=`sed -n 's/^am__include = //p' < "$mf"`
+ test -z "am__include" && continue
+ am__quote=`sed -n 's/^am__quote = //p' < "$mf"`
+ # When using ansi2knr, U may be empty or an underscore; expand it
+ U=`sed -n 's/^U = //p' < "$mf"`
+ # Find all dependency output files, they are included files with
+ # $(DEPDIR) in their names. We invoke sed twice because it is the
+ # simplest approach to changing $(DEPDIR) to its actual value in the
+ # expansion.
+ for file in `sed -n "
+ s/^$am__include $am__quote\(.*(DEPDIR).*\)$am__quote"'$/\1/p' <"$mf" | \
+ sed -e 's/\$(DEPDIR)/'"$DEPDIR"'/g' -e 's/\$U/'"$U"'/g'`; do
+ # Make sure the directory exists.
+ test -f "$dirpart/$file" && continue
+ fdir=`$as_dirname -- "$file" ||
+$as_expr X"$file" : 'X\(.*[^/]\)//*[^/][^/]*/*$' \| \
+ X"$file" : 'X\(//\)[^/]' \| \
+ X"$file" : 'X\(//\)$' \| \
+ X"$file" : 'X\(/\)' \| . 2>/dev/null ||
+$as_echo X"$file" |
+ sed '/^X\(.*[^/]\)\/\/*[^/][^/]*\/*$/{
+ s//\1/
+ q
+ }
+ /^X\(\/\/\)[^/].*/{
+ s//\1/
+ q
+ }
+ /^X\(\/\/\)$/{
+ s//\1/
+ q
+ }
+ /^X\(\/\).*/{
+ s//\1/
+ q
+ }
+ s/.*/./; q'`
+ as_dir=$dirpart/$fdir; as_fn_mkdir_p
+ # echo "creating $dirpart/$file"
+ echo '# dummy' > "$dirpart/$file"
+ done
+ done
+}
+ ;;
+ "libtool":C)
+
+ # See if we are running on zsh, and set the options which allow our
+ # commands through without removal of \ escapes.
+ if test -n "${ZSH_VERSION+set}" ; then
+ setopt NO_GLOB_SUBST
+ fi
+
+ cfgfile="${ofile}T"
+ trap "$RM \"$cfgfile\"; exit 1" 1 2 15
+ $RM "$cfgfile"
+
+ cat <<_LT_EOF >> "$cfgfile"
+#! $SHELL
+
+# `$ECHO "$ofile" | sed 's%^.*/%%'` - Provide generalized library-building support services.
+# Generated automatically by $as_me ($PACKAGE$TIMESTAMP) $VERSION
+# Libtool was configured on host `(hostname || uname -n) 2>/dev/null | sed 1q`:
+# NOTE: Changes made to this file will be lost: look at ltmain.sh.
+#
+# Copyright (C) 1996, 1997, 1998, 1999, 2000, 2001, 2003, 2004, 2005,
+# 2006, 2007, 2008 Free Software Foundation, Inc.
+# Written by Gordon Matzigkeit, 1996
+#
+# This file is part of GNU Libtool.
+#
+# GNU Libtool is free software; you can redistribute it and/or
+# modify it under the terms of the GNU General Public License as
+# published by the Free Software Foundation; either version 2 of
+# the License, or (at your option) any later version.
+#
+# As a special exception to the GNU General Public License,
+# if you distribute this file as part of a program or library that
+# is built using GNU Libtool, you may include this file under the
+# same distribution terms that you use for the rest of that program.
+#
+# GNU Libtool is distributed in the hope that it will be useful,
+# but WITHOUT ANY WARRANTY; without even the implied warranty of
+# MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+# GNU General Public License for more details.
+#
+# You should have received a copy of the GNU General Public License
+# along with GNU Libtool; see the file COPYING. If not, a copy
+# can be downloaded from http://www.gnu.org/licenses/gpl.html, or
+# obtained by writing to the Free Software Foundation, Inc.,
+# 51 Franklin Street, Fifth Floor, Boston, MA 02110-1301, USA.
+
+
+# The names of the tagged configurations supported by this script.
+available_tags="RC "
+
+# ### BEGIN LIBTOOL CONFIG
+
+# Which release of libtool.m4 was used?
+macro_version=$macro_version
+macro_revision=$macro_revision
+
+# Assembler program.
+AS=$AS
+
+# DLL creation program.
+DLLTOOL=$DLLTOOL
+
+# Object dumper program.
+OBJDUMP=$OBJDUMP
+
+# Whether or not to build shared libraries.
+build_libtool_libs=$enable_shared
+
+# Whether or not to build static libraries.
+build_old_libs=$enable_static
+
+# What type of objects to build.
+pic_mode=$pic_mode
+
+# Whether or not to optimize for fast installation.
+fast_install=$enable_fast_install
+
+# The host system.
+host_alias=$host_alias
+host=$host
+host_os=$host_os
+
+# The build system.
+build_alias=$build_alias
+build=$build
+build_os=$build_os
+
+# A sed program that does not truncate output.
+SED=$lt_SED
+
+# Sed that helps us avoid accidentally triggering echo(1) options like -n.
+Xsed="\$SED -e 1s/^X//"
+
+# A grep program that handles long lines.
+GREP=$lt_GREP
+
+# An ERE matcher.
+EGREP=$lt_EGREP
+
+# A literal string matcher.
+FGREP=$lt_FGREP
+
+# A BSD- or MS-compatible name lister.
+NM=$lt_NM
+
+# Whether we need soft or hard links.
+LN_S=$lt_LN_S
+
+# What is the maximum length of a command?
+max_cmd_len=$max_cmd_len
+
+# Object file suffix (normally "o").
+objext=$ac_objext
+
+# Executable file suffix (normally "").
+exeext=$exeext
+
+# whether the shell understands "unset".
+lt_unset=$lt_unset
+
+# turn spaces into newlines.
+SP2NL=$lt_lt_SP2NL
+
+# turn newlines into spaces.
+NL2SP=$lt_lt_NL2SP
+
+# How to create reloadable object files.
+reload_flag=$lt_reload_flag
+reload_cmds=$lt_reload_cmds
+
+# Method to check whether dependent libraries are shared objects.
+deplibs_check_method=$lt_deplibs_check_method
+
+# Command to use when deplibs_check_method == "file_magic".
+file_magic_cmd=$lt_file_magic_cmd
+
+# The archiver.
+AR=$lt_AR
+AR_FLAGS=$lt_AR_FLAGS
+
+# A symbol stripping program.
+STRIP=$lt_STRIP
+
+# Commands used to install an old-style archive.
+RANLIB=$lt_RANLIB
+old_postinstall_cmds=$lt_old_postinstall_cmds
+old_postuninstall_cmds=$lt_old_postuninstall_cmds
+
+# A C compiler.
+LTCC=$lt_CC
+
+# LTCC compiler flags.
+LTCFLAGS=$lt_CFLAGS
+
+# Take the output of nm and produce a listing of raw symbols and C names.
+global_symbol_pipe=$lt_lt_cv_sys_global_symbol_pipe
+
+# Transform the output of nm in a proper C declaration.
+global_symbol_to_cdecl=$lt_lt_cv_sys_global_symbol_to_cdecl
+
+# Transform the output of nm in a C name address pair.
+global_symbol_to_c_name_address=$lt_lt_cv_sys_global_symbol_to_c_name_address
+
+# Transform the output of nm in a C name address pair when lib prefix is needed.
+global_symbol_to_c_name_address_lib_prefix=$lt_lt_cv_sys_global_symbol_to_c_name_address_lib_prefix
+
+# The name of the directory that contains temporary libtool files.
+objdir=$objdir
+
+# Shell to use when invoking shell scripts.
+SHELL=$lt_SHELL
+
+# An echo program that does not interpret backslashes.
+ECHO=$lt_ECHO
+
+# Used to examine libraries when file_magic_cmd begins with "file".
+MAGIC_CMD=$MAGIC_CMD
+
+# Must we lock files when doing compilation?
+need_locks=$lt_need_locks
+
+# Tool to manipulate archived DWARF debug symbol files on Mac OS X.
+DSYMUTIL=$lt_DSYMUTIL
+
+# Tool to change global to local symbols on Mac OS X.
+NMEDIT=$lt_NMEDIT
+
+# Tool to manipulate fat objects and archives on Mac OS X.
+LIPO=$lt_LIPO
+
+# ldd/readelf like tool for Mach-O binaries on Mac OS X.
+OTOOL=$lt_OTOOL
+
+# ldd/readelf like tool for 64 bit Mach-O binaries on Mac OS X 10.4.
+OTOOL64=$lt_OTOOL64
+
+# Old archive suffix (normally "a").
+libext=$libext
+
+# Shared library suffix (normally ".so").
+shrext_cmds=$lt_shrext_cmds
+
+# The commands to extract the exported symbol list from a shared archive.
+extract_expsyms_cmds=$lt_extract_expsyms_cmds
+
+# Variables whose values should be saved in libtool wrapper scripts and
+# restored at link time.
+variables_saved_for_relink=$lt_variables_saved_for_relink
+
+# Do we need the "lib" prefix for modules?
+need_lib_prefix=$need_lib_prefix
+
+# Do we need a version for libraries?
+need_version=$need_version
+
+# Library versioning type.
+version_type=$version_type
+
+# Shared library runtime path variable.
+runpath_var=$runpath_var
+
+# Shared library path variable.
+shlibpath_var=$shlibpath_var
+
+# Is shlibpath searched before the hard-coded library search path?
+shlibpath_overrides_runpath=$shlibpath_overrides_runpath
+
+# Format of library name prefix.
+libname_spec=$lt_libname_spec
+
+# List of archive names. First name is the real one, the rest are links.
+# The last name is the one that the linker finds with -lNAME
+library_names_spec=$lt_library_names_spec
+
+# The coded name of the library, if different from the real name.
+soname_spec=$lt_soname_spec
+
+# Command to use after installation of a shared archive.
+postinstall_cmds=$lt_postinstall_cmds
+
+# Command to use after uninstallation of a shared archive.
+postuninstall_cmds=$lt_postuninstall_cmds
+
+# Commands used to finish a libtool library installation in a directory.
+finish_cmds=$lt_finish_cmds
+
+# As "finish_cmds", except a single script fragment to be evaled but
+# not shown.
+finish_eval=$lt_finish_eval
+
+# Whether we should hardcode library paths into libraries.
+hardcode_into_libs=$hardcode_into_libs
+
+# Compile-time system search path for libraries.
+sys_lib_search_path_spec=$lt_sys_lib_search_path_spec
+
+# Run-time system search path for libraries.
+sys_lib_dlsearch_path_spec=$lt_sys_lib_dlsearch_path_spec
+
+# Whether dlopen is supported.
+dlopen_support=$enable_dlopen
+
+# Whether dlopen of programs is supported.
+dlopen_self=$enable_dlopen_self
+
+# Whether dlopen of statically linked programs is supported.
+dlopen_self_static=$enable_dlopen_self_static
+
+# Commands to strip libraries.
+old_striplib=$lt_old_striplib
+striplib=$lt_striplib
+
+
+# The linker used to build libraries.
+LD=$lt_LD
+
+# Commands used to build an old-style archive.
+old_archive_cmds=$lt_old_archive_cmds
+
+# A language specific compiler.
+CC=$lt_compiler
+
+# Is the compiler the GNU compiler?
+with_gcc=$GCC
+
+# Compiler flag to turn off builtin functions.
+no_builtin_flag=$lt_lt_prog_compiler_no_builtin_flag
+
+# How to pass a linker flag through the compiler.
+wl=$lt_lt_prog_compiler_wl
+
+# Additional compiler flags for building library objects.
+pic_flag=$lt_lt_prog_compiler_pic
+
+# Compiler flag to prevent dynamic linking.
+link_static_flag=$lt_lt_prog_compiler_static
+
+# Does compiler simultaneously support -c and -o options?
+compiler_c_o=$lt_lt_cv_prog_compiler_c_o
+
+# Whether or not to add -lc for building shared libraries.
+build_libtool_need_lc=$archive_cmds_need_lc
+
+# Whether or not to disallow shared libs when runtime libs are static.
+allow_libtool_libs_with_static_runtimes=$enable_shared_with_static_runtimes
+
+# Compiler flag to allow reflexive dlopens.
+export_dynamic_flag_spec=$lt_export_dynamic_flag_spec
+
+# Compiler flag to generate shared objects directly from archives.
+whole_archive_flag_spec=$lt_whole_archive_flag_spec
+
+# Whether the compiler copes with passing no objects directly.
+compiler_needs_object=$lt_compiler_needs_object
+
+# Create an old-style archive from a shared archive.
+old_archive_from_new_cmds=$lt_old_archive_from_new_cmds
+
+# Create a temporary old-style archive to link instead of a shared archive.
+old_archive_from_expsyms_cmds=$lt_old_archive_from_expsyms_cmds
+
+# Commands used to build a shared archive.
+archive_cmds=$lt_archive_cmds
+archive_expsym_cmds=$lt_archive_expsym_cmds
+
+# Commands used to build a loadable module if different from building
+# a shared archive.
+module_cmds=$lt_module_cmds
+module_expsym_cmds=$lt_module_expsym_cmds
+
+# Whether we are building with GNU ld or not.
+with_gnu_ld=$lt_with_gnu_ld
+
+# Flag that allows shared libraries with undefined symbols to be built.
+allow_undefined_flag=$lt_allow_undefined_flag
+
+# Flag that enforces no undefined symbols.
+no_undefined_flag=$lt_no_undefined_flag
+
+# Flag to hardcode \$libdir into a binary during linking.
+# This must work even if \$libdir does not exist
+hardcode_libdir_flag_spec=$lt_hardcode_libdir_flag_spec
+
+# If ld is used when linking, flag to hardcode \$libdir into a binary
+# during linking. This must work even if \$libdir does not exist.
+hardcode_libdir_flag_spec_ld=$lt_hardcode_libdir_flag_spec_ld
+
+# Whether we need a single "-rpath" flag with a separated argument.
+hardcode_libdir_separator=$lt_hardcode_libdir_separator
+
+# Set to "yes" if using DIR/libNAME\${shared_ext} during linking hardcodes
+# DIR into the resulting binary.
+hardcode_direct=$hardcode_direct
+
+# Set to "yes" if using DIR/libNAME\${shared_ext} during linking hardcodes
+# DIR into the resulting binary and the resulting library dependency is
+# "absolute",i.e impossible to change by setting \${shlibpath_var} if the
+# library is relocated.
+hardcode_direct_absolute=$hardcode_direct_absolute
+
+# Set to "yes" if using the -LDIR flag during linking hardcodes DIR
+# into the resulting binary.
+hardcode_minus_L=$hardcode_minus_L
+
+# Set to "yes" if using SHLIBPATH_VAR=DIR during linking hardcodes DIR
+# into the resulting binary.
+hardcode_shlibpath_var=$hardcode_shlibpath_var
+
+# Set to "yes" if building a shared library automatically hardcodes DIR
+# into the library and all subsequent libraries and executables linked
+# against it.
+hardcode_automatic=$hardcode_automatic
+
+# Set to yes if linker adds runtime paths of dependent libraries
+# to runtime path list.
+inherit_rpath=$inherit_rpath
+
+# Whether libtool must link a program against all its dependency libraries.
+link_all_deplibs=$link_all_deplibs
+
+# Fix the shell variable \$srcfile for the compiler.
+fix_srcfile_path=$lt_fix_srcfile_path
+
+# Set to "yes" if exported symbols are required.
+always_export_symbols=$always_export_symbols
+
+# The commands to list exported symbols.
+export_symbols_cmds=$lt_export_symbols_cmds
+
+# Symbols that should not be listed in the preloaded symbols.
+exclude_expsyms=$lt_exclude_expsyms
+
+# Symbols that must always be exported.
+include_expsyms=$lt_include_expsyms
+
+# Commands necessary for linking programs (against libraries) with templates.
+prelink_cmds=$lt_prelink_cmds
+
+# Specify filename containing input files.
+file_list_spec=$lt_file_list_spec
+
+# How to hardcode a shared library path into an executable.
+hardcode_action=$hardcode_action
+
+# ### END LIBTOOL CONFIG
+
+_LT_EOF
+
+ case $host_os in
+ aix3*)
+ cat <<\_LT_EOF >> "$cfgfile"
+# AIX sometimes has problems with the GCC collect2 program. For some
+# reason, if we set the COLLECT_NAMES environment variable, the problems
+# vanish in a puff of smoke.
+if test "X${COLLECT_NAMES+set}" != Xset; then
+ COLLECT_NAMES=
+ export COLLECT_NAMES
+fi
+_LT_EOF
+ ;;
+ esac
+
+
+ltmain="$ac_aux_dir/ltmain.sh"
+
+
+ # We use sed instead of cat because bash on DJGPP gets confused if
+ # if finds mixed CR/LF and LF-only lines. Since sed operates in
+ # text mode, it properly converts lines to CR/LF. This bash problem
+ # is reportedly fixed, but why not run on old versions too?
+ sed '/^# Generated shell functions inserted here/q' "$ltmain" >> "$cfgfile" \
+ || (rm -f "$cfgfile"; exit 1)
+
+ case $xsi_shell in
+ yes)
+ cat << \_LT_EOF >> "$cfgfile"
+
+# func_dirname file append nondir_replacement
+# Compute the dirname of FILE. If nonempty, add APPEND to the result,
+# otherwise set result to NONDIR_REPLACEMENT.
+func_dirname ()
+{
+ case ${1} in
+ */*) func_dirname_result="${1%/*}${2}" ;;
+ * ) func_dirname_result="${3}" ;;
+ esac
+}
+
+# func_basename file
+func_basename ()
+{
+ func_basename_result="${1##*/}"
+}
+
+# func_dirname_and_basename file append nondir_replacement
+# perform func_basename and func_dirname in a single function
+# call:
+# dirname: Compute the dirname of FILE. If nonempty,
+# add APPEND to the result, otherwise set result
+# to NONDIR_REPLACEMENT.
+# value returned in "$func_dirname_result"
+# basename: Compute filename of FILE.
+# value retuned in "$func_basename_result"
+# Implementation must be kept synchronized with func_dirname
+# and func_basename. For efficiency, we do not delegate to
+# those functions but instead duplicate the functionality here.
+func_dirname_and_basename ()
+{
+ case ${1} in
+ */*) func_dirname_result="${1%/*}${2}" ;;
+ * ) func_dirname_result="${3}" ;;
+ esac
+ func_basename_result="${1##*/}"
+}
+
+# func_stripname prefix suffix name
+# strip PREFIX and SUFFIX off of NAME.
+# PREFIX and SUFFIX must not contain globbing or regex special
+# characters, hashes, percent signs, but SUFFIX may contain a leading
+# dot (in which case that matches only a dot).
+func_stripname ()
+{
+ # pdksh 5.2.14 does not do ${X%$Y} correctly if both X and Y are
+ # positional parameters, so assign one to ordinary parameter first.
+ func_stripname_result=${3}
+ func_stripname_result=${func_stripname_result#"${1}"}
+ func_stripname_result=${func_stripname_result%"${2}"}
+}
+
+# func_opt_split
+func_opt_split ()
+{
+ func_opt_split_opt=${1%%=*}
+ func_opt_split_arg=${1#*=}
+}
+
+# func_lo2o object
+func_lo2o ()
+{
+ case ${1} in
+ *.lo) func_lo2o_result=${1%.lo}.${objext} ;;
+ *) func_lo2o_result=${1} ;;
+ esac
+}
+
+# func_xform libobj-or-source
+func_xform ()
+{
+ func_xform_result=${1%.*}.lo
+}
+
+# func_arith arithmetic-term...
+func_arith ()
+{
+ func_arith_result=$(( $* ))
+}
+
+# func_len string
+# STRING may not start with a hyphen.
+func_len ()
+{
+ func_len_result=${#1}
+}
+
+_LT_EOF
+ ;;
+ *) # Bourne compatible functions.
+ cat << \_LT_EOF >> "$cfgfile"
+
+# func_dirname file append nondir_replacement
+# Compute the dirname of FILE. If nonempty, add APPEND to the result,
+# otherwise set result to NONDIR_REPLACEMENT.
+func_dirname ()
+{
+ # Extract subdirectory from the argument.
+ func_dirname_result=`$ECHO "X${1}" | $Xsed -e "$dirname"`
+ if test "X$func_dirname_result" = "X${1}"; then
+ func_dirname_result="${3}"
+ else
+ func_dirname_result="$func_dirname_result${2}"
+ fi
+}
+
+# func_basename file
+func_basename ()
+{
+ func_basename_result=`$ECHO "X${1}" | $Xsed -e "$basename"`
+}
+
+
+# func_stripname prefix suffix name
+# strip PREFIX and SUFFIX off of NAME.
+# PREFIX and SUFFIX must not contain globbing or regex special
+# characters, hashes, percent signs, but SUFFIX may contain a leading
+# dot (in which case that matches only a dot).
+# func_strip_suffix prefix name
+func_stripname ()
+{
+ case ${2} in
+ .*) func_stripname_result=`$ECHO "X${3}" \
+ | $Xsed -e "s%^${1}%%" -e "s%\\\\${2}\$%%"`;;
+ *) func_stripname_result=`$ECHO "X${3}" \
+ | $Xsed -e "s%^${1}%%" -e "s%${2}\$%%"`;;
+ esac
+}
+
+# sed scripts:
+my_sed_long_opt='1s/^\(-[^=]*\)=.*/\1/;q'
+my_sed_long_arg='1s/^-[^=]*=//'
+
+# func_opt_split
+func_opt_split ()
+{
+ func_opt_split_opt=`$ECHO "X${1}" | $Xsed -e "$my_sed_long_opt"`
+ func_opt_split_arg=`$ECHO "X${1}" | $Xsed -e "$my_sed_long_arg"`
+}
+
+# func_lo2o object
+func_lo2o ()
+{
+ func_lo2o_result=`$ECHO "X${1}" | $Xsed -e "$lo2o"`
+}
+
+# func_xform libobj-or-source
+func_xform ()
+{
+ func_xform_result=`$ECHO "X${1}" | $Xsed -e 's/\.[^.]*$/.lo/'`
+}
+
+# func_arith arithmetic-term...
+func_arith ()
+{
+ func_arith_result=`expr "$@"`
+}
+
+# func_len string
+# STRING may not start with a hyphen.
+func_len ()
+{
+ func_len_result=`expr "$1" : ".*" 2>/dev/null || echo $max_cmd_len`
+}
+
+_LT_EOF
+esac
+
+case $lt_shell_append in
+ yes)
+ cat << \_LT_EOF >> "$cfgfile"
+
+# func_append var value
+# Append VALUE to the end of shell variable VAR.
+func_append ()
+{
+ eval "$1+=\$2"
+}
+_LT_EOF
+ ;;
+ *)
+ cat << \_LT_EOF >> "$cfgfile"
+
+# func_append var value
+# Append VALUE to the end of shell variable VAR.
+func_append ()
+{
+ eval "$1=\$$1\$2"
+}
+
+_LT_EOF
+ ;;
+ esac
+
+
+ sed -n '/^# Generated shell functions inserted here/,$p' "$ltmain" >> "$cfgfile" \
+ || (rm -f "$cfgfile"; exit 1)
+
+ mv -f "$cfgfile" "$ofile" ||
+ (rm -f "$ofile" && cp "$cfgfile" "$ofile" && rm -f "$cfgfile")
+ chmod +x "$ofile"
+
+
+ cat <<_LT_EOF >> "$ofile"
+
+# ### BEGIN LIBTOOL TAG CONFIG: RC
+
+# The linker used to build libraries.
+LD=$lt_LD_RC
+
+# Commands used to build an old-style archive.
+old_archive_cmds=$lt_old_archive_cmds_RC
+
+# A language specific compiler.
+CC=$lt_compiler_RC
+
+# Is the compiler the GNU compiler?
+with_gcc=$GCC_RC
+
+# Compiler flag to turn off builtin functions.
+no_builtin_flag=$lt_lt_prog_compiler_no_builtin_flag_RC
+
+# How to pass a linker flag through the compiler.
+wl=$lt_lt_prog_compiler_wl_RC
+
+# Additional compiler flags for building library objects.
+pic_flag=$lt_lt_prog_compiler_pic_RC
+
+# Compiler flag to prevent dynamic linking.
+link_static_flag=$lt_lt_prog_compiler_static_RC
+
+# Does compiler simultaneously support -c and -o options?
+compiler_c_o=$lt_lt_cv_prog_compiler_c_o_RC
+
+# Whether or not to add -lc for building shared libraries.
+build_libtool_need_lc=$archive_cmds_need_lc_RC
+
+# Whether or not to disallow shared libs when runtime libs are static.
+allow_libtool_libs_with_static_runtimes=$enable_shared_with_static_runtimes_RC
+
+# Compiler flag to allow reflexive dlopens.
+export_dynamic_flag_spec=$lt_export_dynamic_flag_spec_RC
+
+# Compiler flag to generate shared objects directly from archives.
+whole_archive_flag_spec=$lt_whole_archive_flag_spec_RC
+
+# Whether the compiler copes with passing no objects directly.
+compiler_needs_object=$lt_compiler_needs_object_RC
+
+# Create an old-style archive from a shared archive.
+old_archive_from_new_cmds=$lt_old_archive_from_new_cmds_RC
+
+# Create a temporary old-style archive to link instead of a shared archive.
+old_archive_from_expsyms_cmds=$lt_old_archive_from_expsyms_cmds_RC
+
+# Commands used to build a shared archive.
+archive_cmds=$lt_archive_cmds_RC
+archive_expsym_cmds=$lt_archive_expsym_cmds_RC
+
+# Commands used to build a loadable module if different from building
+# a shared archive.
+module_cmds=$lt_module_cmds_RC
+module_expsym_cmds=$lt_module_expsym_cmds_RC
+
+# Whether we are building with GNU ld or not.
+with_gnu_ld=$lt_with_gnu_ld_RC
+
+# Flag that allows shared libraries with undefined symbols to be built.
+allow_undefined_flag=$lt_allow_undefined_flag_RC
+
+# Flag that enforces no undefined symbols.
+no_undefined_flag=$lt_no_undefined_flag_RC
+
+# Flag to hardcode \$libdir into a binary during linking.
+# This must work even if \$libdir does not exist
+hardcode_libdir_flag_spec=$lt_hardcode_libdir_flag_spec_RC
+
+# If ld is used when linking, flag to hardcode \$libdir into a binary
+# during linking. This must work even if \$libdir does not exist.
+hardcode_libdir_flag_spec_ld=$lt_hardcode_libdir_flag_spec_ld_RC
+
+# Whether we need a single "-rpath" flag with a separated argument.
+hardcode_libdir_separator=$lt_hardcode_libdir_separator_RC
+
+# Set to "yes" if using DIR/libNAME\${shared_ext} during linking hardcodes
+# DIR into the resulting binary.
+hardcode_direct=$hardcode_direct_RC
+
+# Set to "yes" if using DIR/libNAME\${shared_ext} during linking hardcodes
+# DIR into the resulting binary and the resulting library dependency is
+# "absolute",i.e impossible to change by setting \${shlibpath_var} if the
+# library is relocated.
+hardcode_direct_absolute=$hardcode_direct_absolute_RC
+
+# Set to "yes" if using the -LDIR flag during linking hardcodes DIR
+# into the resulting binary.
+hardcode_minus_L=$hardcode_minus_L_RC
+
+# Set to "yes" if using SHLIBPATH_VAR=DIR during linking hardcodes DIR
+# into the resulting binary.
+hardcode_shlibpath_var=$hardcode_shlibpath_var_RC
+
+# Set to "yes" if building a shared library automatically hardcodes DIR
+# into the library and all subsequent libraries and executables linked
+# against it.
+hardcode_automatic=$hardcode_automatic_RC
+
+# Set to yes if linker adds runtime paths of dependent libraries
+# to runtime path list.
+inherit_rpath=$inherit_rpath_RC
+
+# Whether libtool must link a program against all its dependency libraries.
+link_all_deplibs=$link_all_deplibs_RC
+
+# Fix the shell variable \$srcfile for the compiler.
+fix_srcfile_path=$lt_fix_srcfile_path_RC
+
+# Set to "yes" if exported symbols are required.
+always_export_symbols=$always_export_symbols_RC
+
+# The commands to list exported symbols.
+export_symbols_cmds=$lt_export_symbols_cmds_RC
+
+# Symbols that should not be listed in the preloaded symbols.
+exclude_expsyms=$lt_exclude_expsyms_RC
+
+# Symbols that must always be exported.
+include_expsyms=$lt_include_expsyms_RC
+
+# Commands necessary for linking programs (against libraries) with templates.
+prelink_cmds=$lt_prelink_cmds_RC
+
+# Specify filename containing input files.
+file_list_spec=$lt_file_list_spec_RC
+
+# How to hardcode a shared library path into an executable.
+hardcode_action=$hardcode_action_RC
+
+# ### END LIBTOOL TAG CONFIG: RC
+_LT_EOF
+
+ ;;
+ "po-directories":C)
+ for ac_file in $CONFIG_FILES; do
+ # Support "outfile[:infile[:infile...]]"
+ case "$ac_file" in
+ *:*) ac_file=`echo "$ac_file"|sed 's%:.*%%'` ;;
+ esac
+ # PO directories have a Makefile.in generated from Makefile.in.in.
+ case "$ac_file" in */Makefile.in)
+ # Adjust a relative srcdir.
+ ac_dir=`echo "$ac_file"|sed 's%/[^/][^/]*$%%'`
+ ac_dir_suffix="/`echo "$ac_dir"|sed 's%^\./%%'`"
+ ac_dots=`echo "$ac_dir_suffix"|sed 's%/[^/]*%../%g'`
+ # In autoconf-2.13 it is called $ac_given_srcdir.
+ # In autoconf-2.50 it is called $srcdir.
+ test -n "$ac_given_srcdir" || ac_given_srcdir="$srcdir"
+ case "$ac_given_srcdir" in
+ .) top_srcdir=`echo $ac_dots|sed 's%/$%%'` ;;
+ /*) top_srcdir="$ac_given_srcdir" ;;
+ *) top_srcdir="$ac_dots$ac_given_srcdir" ;;
+ esac
+ # Treat a directory as a PO directory if and only if it has a
+ # POTFILES.in file. This allows packages to have multiple PO
+ # directories under different names or in different locations.
+ if test -f "$ac_given_srcdir/$ac_dir/POTFILES.in"; then
+ rm -f "$ac_dir/POTFILES"
+ test -n "$as_me" && echo "$as_me: creating $ac_dir/POTFILES" || echo "creating $ac_dir/POTFILES"
+ cat "$ac_given_srcdir/$ac_dir/POTFILES.in" | sed -e "/^#/d" -e "/^[ ]*\$/d" -e "s,.*, $top_srcdir/& \\\\," | sed -e "\$s/\(.*\) \\\\/\1/" > "$ac_dir/POTFILES"
+ POMAKEFILEDEPS="POTFILES.in"
+ # ALL_LINGUAS, POFILES, UPDATEPOFILES, DUMMYPOFILES, GMOFILES depend
+ # on $ac_dir but don't depend on user-specified configuration
+ # parameters.
+ if test -f "$ac_given_srcdir/$ac_dir/LINGUAS"; then
+ # The LINGUAS file contains the set of available languages.
+ if test -n "$OBSOLETE_ALL_LINGUAS"; then
+ test -n "$as_me" && echo "$as_me: setting ALL_LINGUAS in configure.in is obsolete" || echo "setting ALL_LINGUAS in configure.in is obsolete"
+ fi
+ ALL_LINGUAS_=`sed -e "/^#/d" -e "s/#.*//" "$ac_given_srcdir/$ac_dir/LINGUAS"`
+ # Hide the ALL_LINGUAS assigment from automake < 1.5.
+ eval 'ALL_LINGUAS''=$ALL_LINGUAS_'
+ POMAKEFILEDEPS="$POMAKEFILEDEPS LINGUAS"
+ else
+ # The set of available languages was given in configure.in.
+ # Hide the ALL_LINGUAS assigment from automake < 1.5.
+ eval 'ALL_LINGUAS''=$OBSOLETE_ALL_LINGUAS'
+ fi
+ # Compute POFILES
+ # as $(foreach lang, $(ALL_LINGUAS), $(srcdir)/$(lang).po)
+ # Compute UPDATEPOFILES
+ # as $(foreach lang, $(ALL_LINGUAS), $(lang).po-update)
+ # Compute DUMMYPOFILES
+ # as $(foreach lang, $(ALL_LINGUAS), $(lang).nop)
+ # Compute GMOFILES
+ # as $(foreach lang, $(ALL_LINGUAS), $(srcdir)/$(lang).gmo)
+ case "$ac_given_srcdir" in
+ .) srcdirpre= ;;
+ *) srcdirpre='$(srcdir)/' ;;
+ esac
+ POFILES=
+ UPDATEPOFILES=
+ DUMMYPOFILES=
+ GMOFILES=
+ for lang in $ALL_LINGUAS; do
+ POFILES="$POFILES $srcdirpre$lang.po"
+ UPDATEPOFILES="$UPDATEPOFILES $lang.po-update"
+ DUMMYPOFILES="$DUMMYPOFILES $lang.nop"
+ GMOFILES="$GMOFILES $srcdirpre$lang.gmo"
+ done
+ # CATALOGS depends on both $ac_dir and the user's LINGUAS
+ # environment variable.
+ INST_LINGUAS=
+ if test -n "$ALL_LINGUAS"; then
+ for presentlang in $ALL_LINGUAS; do
+ useit=no
+ if test "%UNSET%" != "$LINGUAS"; then
+ desiredlanguages="$LINGUAS"
+ else
+ desiredlanguages="$ALL_LINGUAS"
+ fi
+ for desiredlang in $desiredlanguages; do
+ # Use the presentlang catalog if desiredlang is
+ # a. equal to presentlang, or
+ # b. a variant of presentlang (because in this case,
+ # presentlang can be used as a fallback for messages
+ # which are not translated in the desiredlang catalog).
+ case "$desiredlang" in
+ "$presentlang"*) useit=yes;;
+ esac
+ done
+ if test $useit = yes; then
+ INST_LINGUAS="$INST_LINGUAS $presentlang"
+ fi
+ done
+ fi
+ CATALOGS=
+ if test -n "$INST_LINGUAS"; then
+ for lang in $INST_LINGUAS; do
+ CATALOGS="$CATALOGS $lang.gmo"
+ done
+ fi
+ test -n "$as_me" && echo "$as_me: creating $ac_dir/Makefile" || echo "creating $ac_dir/Makefile"
+ sed -e "/^POTFILES =/r $ac_dir/POTFILES" -e "/^# Makevars/r $ac_given_srcdir/$ac_dir/Makevars" -e "s|@POFILES@|$POFILES|g" -e "s|@UPDATEPOFILES@|$UPDATEPOFILES|g" -e "s|@DUMMYPOFILES@|$DUMMYPOFILES|g" -e "s|@GMOFILES@|$GMOFILES|g" -e "s|@CATALOGS@|$CATALOGS|g" -e "s|@POMAKEFILEDEPS@|$POMAKEFILEDEPS|g" "$ac_dir/Makefile.in" > "$ac_dir/Makefile"
+ for f in "$ac_given_srcdir/$ac_dir"/Rules-*; do
+ if test -f "$f"; then
+ case "$f" in
+ *.orig | *.bak | *~) ;;
+ *) cat "$f" >> "$ac_dir/Makefile" ;;
+ esac
+ fi
+ done
+ fi
+ ;;
+ esac
+ done ;;
+
+ esac
+done # for ac_tag
+
+
+as_fn_exit 0
+_ACEOF
+ac_clean_files=$ac_clean_files_save
+
+test $ac_write_fail = 0 ||
+ as_fn_error "write failure creating $CONFIG_STATUS" "$LINENO" 5
+
+
+# configure is writing to config.log, and then calls config.status.
+# config.status does its own redirection, appending to config.log.
+# Unfortunately, on DOS this fails, as config.log is still kept open
+# by configure, so config.status won't be able to write to it; its
+# output is simply discarded. So we exec the FD to /dev/null,
+# effectively closing config.log, so it can be properly (re)opened and
+# appended to by config.status. When coming back to configure, we
+# need to make the FD available again.
+if test "$no_create" != yes; then
+ ac_cs_success=:
+ ac_config_status_args=
+ test "$silent" = yes &&
+ ac_config_status_args="$ac_config_status_args --quiet"
+ exec 5>/dev/null
+ $SHELL $CONFIG_STATUS $ac_config_status_args || ac_cs_success=false
+ exec 5>>config.log
+ # Use ||, not &&, to avoid exiting from the if with $? = 1, which
+ # would make configure fail if this is the last instruction.
+ $ac_cs_success || as_fn_exit $?
+fi
+if test -n "$ac_unrecognized_opts" && test "$enable_option_checking" != no; then
+ { $as_echo "$as_me:${as_lineno-$LINENO}: WARNING: unrecognized options: $ac_unrecognized_opts" >&5
+$as_echo "$as_me: WARNING: unrecognized options: $ac_unrecognized_opts" >&2;}
+fi
+
diff --git a/Build/source/utils/xz-4.999.8beta/configure.ac b/Build/source/utils/xz-4.999.9beta/configure.ac
index afd5afc1445..d125a6936da 100644
--- a/Build/source/utils/xz-4.999.8beta/configure.ac
+++ b/Build/source/utils/xz-4.999.9beta/configure.ac
@@ -3,17 +3,10 @@
###############################################################################
#
-# Copyright (C) 2007 Lasse Collin
+# Author: Lasse Collin
#
-# This library is free software; you can redistribute it and/or
-# modify it under the terms of the GNU Lesser General Public
-# License as published by the Free Software Foundation; either
-# version 2.1 of the License, or (at your option) any later version.
-#
-# This library is distributed in the hope that it will be useful,
-# but WITHOUT ANY WARRANTY; without even the implied warranty of
-# MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the GNU
-# Lesser General Public License for more details.
+# This file has been put into the public domain.
+# You can do whatever you want with this file.
#
###############################################################################
@@ -24,10 +17,18 @@
AC_PREREQ([2.61])
-AC_INIT([XZ Utils], [4.999.8beta], [lasse.collin@tukaani.org], [xz])
+AC_INIT([XZ Utils], m4_esyscmd([/bin/sh version.sh]),
+ [lasse.collin@tukaani.org], [xz])
AC_CONFIG_SRCDIR([src/liblzma/common/common.h])
+AC_CONFIG_AUX_DIR([build-aux])
+AC_CONFIG_MACRO_DIR([m4])
AC_CONFIG_HEADER([config.h])
+PACKAGE_HOMEPAGE=http://tukaani.org/xz/
+AC_DEFINE_UNQUOTED([PACKAGE_HOMEPAGE], ["$PACKAGE_HOMEPAGE"],
+ [Define to the URL of the home page of this package.])
+AC_SUBST([PACKAGE_HOMEPAGE])
+
echo
echo "$PACKAGE_STRING"
@@ -36,9 +37,17 @@ echo "System type:"
# This is needed to know if assembler optimizations can be used.
AC_CANONICAL_HOST
+# We do some special things on Windows (32-bit or 64-bit) builds.
+case $host_os in
+ mingw* | cygwin*) is_w32=yes ;;
+ *) is_w32=no ;;
+esac
+AM_CONDITIONAL([COND_W32], [test "$is_w32" = yes])
+
echo
echo "Configure options:"
+AM_CFLAGS=
#############
@@ -57,45 +66,6 @@ fi
###########
-# Encoder #
-###########
-
-AC_MSG_CHECKING([if encoder components should be built])
-AC_ARG_ENABLE([encoder], AC_HELP_STRING([--disable-encoder],
- [Do not build the encoder components.]),
- [], enable_encoder=yes)
-if test "x$enable_encoder" = xyes; then
- AC_DEFINE([HAVE_ENCODER], [1],
- [Define to 1 if encoder components are enabled.])
- AC_MSG_RESULT([yes])
-else
- AC_MSG_RESULT([no])
-fi
-AM_CONDITIONAL(COND_MAIN_ENCODER, test "x$enable_encoder" = xyes)
-
-
-###########
-# Decoder #
-###########
-
-AC_MSG_CHECKING([if decoder components should be built])
-AC_ARG_ENABLE([decoder], AC_HELP_STRING([--disable-decoder],
- [Do not build the decoder components.]),
- [], enable_decoder=yes)
-if test "x$enable_decoder" = xyes; then
- AC_DEFINE([HAVE_DECODER], [1],
- [Define to 1 if decoder components are enabled.])
- AC_MSG_RESULT([yes])
-else
- AC_MSG_RESULT([no])
- if test "x$enable_encoder" = xno; then
- AC_MSG_ERROR([Do not disable both encoder and decoder.])
- fi
-fi
-AM_CONDITIONAL(COND_MAIN_DECODER, test "x$enable_decoder" = xyes)
-
-
-###########
# Filters #
###########
@@ -119,6 +89,8 @@ enable_encoders=`echo "$enable_encoders" | sed 's/,subblock//; s/,/ /g'`
if test "x$enable_encoders" = xno || test "x$enable_encoders" = x; then
AC_MSG_RESULT([(none)])
else
+ AC_DEFINE([HAVE_ENCODER], [1],
+ [Define to 1 if encoder components are enabled.])
for arg in $enable_encoders
do
case $arg in m4_foreach([NAME], [SUPPORTED_FILTERS], [
@@ -146,6 +118,8 @@ enable_decoders=`echo "$enable_decoders" | sed 's/,subblock//; s/,/ /g'`
if test "x$enable_decoders" = xno || test "x$enable_decoders" = x; then
AC_MSG_RESULT([(none)])
else
+ AC_DEFINE([HAVE_DECODER], [1],
+ [Define to 1 if decoder components are enabled.])
for arg in $enable_decoders
do
case $arg in m4_foreach([NAME], [SUPPORTED_FILTERS], [
@@ -174,6 +148,9 @@ if test "x$enable_encoder_lzma2$enable_encoder_lzma1" = xyesno \
AC_MSG_ERROR([LZMA2 requires that LZMA1 is also enabled.])
fi
+AM_CONDITIONAL(COND_MAIN_ENCODER, test "x$enable_encoders" != xno && test "x$enable_encoders" != x)
+AM_CONDITIONAL(COND_MAIN_DECODER, test "x$enable_decoders" != xno && test "x$enable_decoders" != x)
+
m4_foreach([NAME], [SUPPORTED_FILTERS],
[AM_CONDITIONAL(COND_FILTER_[]m4_toupper(NAME), test "x$enable_filter_[]NAME" = xyes)
AM_CONDITIONAL(COND_ENCODER_[]m4_toupper(NAME), test "x$enable_encoder_[]NAME" = xyes)
@@ -225,7 +202,7 @@ AC_ARG_ENABLE([match-finders], AC_HELP_STRING([--enable-match-finders=LIST],
m4_translit(m4_defn([SUPPORTED_MATCH_FINDERS]), [,], [ ])), [],
[enable_match_finders=SUPPORTED_MATCH_FINDERS])
enable_match_finders=`echo "$enable_match_finders" | sed 's/,/ /g'`
-if test "x$enable_encoder" = xyes && test "x$enable_encoder_lz" = xyes ; then
+if test "x$enable_encoder_lz" = xyes ; then
for arg in $enable_match_finders
do
case $arg in m4_foreach([NAME], [SUPPORTED_MATCH_FINDERS], [
@@ -387,16 +364,59 @@ AC_ARG_ENABLE([threads], AC_HELP_STRING([--disable-threads],
This makes some things thread-unsafe.]),
[], [enable_threads=yes])
if test "x$enable_threads" != xyes && test "x$enable_threads" != xno; then
+ AC_MSG_RESULT([])
AC_MSG_ERROR([--enable-threads accepts only \`yes' or \`no'])
fi
+AC_MSG_RESULT([$enable_threads])
# We use the actual result a little later.
+############################################
+# xz/xzdec/lzmadec linkage against liblzma #
+############################################
+
+# Link the xz, xzdec, and lzmadec command line tools against static liblzma
+# unless using --enable-dynamic. Using static liblzma gives a little bit
+# faster executable on x86, because no register is wasted for PIC. We also
+# have one dependency less, which allows users to more freely copy the xz
+# binary to other boxes. However, I wouldn't be surprised if distro
+# maintainers still prefer dynamic linking, so let's make it easy for them.
+
+AC_MSG_CHECKING([how programs should be linked against liblzma])
+AC_ARG_ENABLE([dynamic], [AC_HELP_STRING([--enable-dynamic=TYPE],
+ [Set how command line tools are linked against liblzma.
+ TYPE can be mixed, yes, or no. The default is mixed.])],
+ [], [enable_dynamic=mixed])
+case $enable_dynamic in
+ mixed)
+ AC_MSG_RESULT([mixed (some dynamically, some statically)])
+ ;;
+ yes)
+ AC_MSG_RESULT([dynamically])
+ ;;
+ no)
+ AC_MSG_RESULT([statically])
+ ;;
+ *)
+ AC_MSG_RESULT([])
+ AC_MSG_ERROR([--enable-dynamic accepts only \`mixed', \`yes', or \`no'])
+ ;;
+esac
+# We use the actual results later, because we don't know yet
+# if --disable-shared or --disable-static was used.
+
+
###############################################################################
# Checks for programs.
###############################################################################
echo
+gl_POSIX_SHELL
+if test -z "$POSIX_SHELL" ; then
+ AC_MSG_ERROR([No POSIX conforming shell (sh) was found.])
+fi
+
+echo
echo "Initializing Automake:"
AM_INIT_AUTOMAKE([1.10 foreign tar-v7 filename-length-max=99])
@@ -416,15 +436,21 @@ if test "x$enable_threads" = xyes; then
echo "Threading support:"
ACX_PTHREAD
LIBS="$LIBS $PTHREAD_LIBS"
- CFLAGS="$PTHREAD_CFLAGS $CFLAGS"
+ AM_CFLAGS="$AM_CFLAGS $PTHREAD_CFLAGS"
CC="$PTHREAD_CC"
fi
echo
echo "Initializing Libtool:"
-CXX=no
-F77=no
-AC_PROG_LIBTOOL
+LT_PREREQ([2.2])
+LT_INIT([win32-dll])
+LT_LANG([Windows Resource])
+
+# This is a bit wrong since it is possible to request that only some libs
+# are built as shared. Using that feature isn't so common though, and this
+# breaks only on Windows (at least for now) if the user enables only some
+# libs as shared.
+AM_CONDITIONAL([COND_SHARED], [test "x$enable_shared" != xno])
###############################################################################
@@ -523,118 +549,27 @@ gl_GETOPT
# Find the best function to set timestamps.
AC_CHECK_FUNCS([futimens futimes futimesat utimes utime], [break])
-# Check how to find out the amount of physical memory in the system. The
-# xz command line tool uses this to automatically limit its memory usage.
-# - sysconf() gives all the needed info on GNU+Linux and Solaris.
-# - BSDs use sysctl().
-AC_MSG_CHECKING([how to detect the amount of physical memory])
-AC_COMPILE_IFELSE([AC_LANG_SOURCE([[
-#include <unistd.h>
-int
-main()
-{
- long i;
- i = sysconf(_SC_PAGESIZE);
- i = sysconf(_SC_PHYS_PAGES);
- return 0;
-}
-]])], [
- AC_DEFINE([HAVE_PHYSMEM_SYSCONF], [1],
- [Define to 1 if the amount of physical memory can be detected
- with sysconf(_SC_PAGESIZE) and sysconf(_SC_PHYS_PAGES).])
- AC_MSG_RESULT([sysconf])
-], [
-AC_COMPILE_IFELSE([AC_LANG_SOURCE([[
-#include <sys/types.h>
-#ifdef HAVE_SYS_PARAM_H
-# include <sys/param.h>
-#endif
-#include <sys/sysctl.h>
-int
-main()
-{
- int name[2] = { CTL_HW, HW_PHYSMEM };
- unsigned long mem;
- size_t mem_ptr_size = sizeof(mem);
- sysctl(name, 2, &mem, &mem_ptr_size, NULL, NULL);
- return 0;
-}
-]])], [
- AC_DEFINE([HAVE_PHYSMEM_SYSCTL], [1],
- [Define to 1 if the amount of physical memory can be detected
- with sysctl().])
- AC_MSG_RESULT([sysctl])
-], [
- AC_MSG_RESULT([unknown])
-])])
-
-# Check how to find out the number of available CPU cores in the system.
-# sysconf(_SC_NPROCESSORS_ONLN) works on most systems, except that BSDs
-# use sysctl().
-AC_MSG_CHECKING([how to detect the number of available CPU cores])
-AC_COMPILE_IFELSE([AC_LANG_SOURCE([[
-#include <unistd.h>
-int
-main()
-{
- long i;
- i = sysconf(_SC_NPROCESSORS_ONLN);
- return 0;
-}
-]])], [
- AC_DEFINE([HAVE_NCPU_SYSCONF], [1],
- [Define to 1 if the number of available CPU cores can be
- detected with sysconf(_SC_NPROCESSORS_ONLN).])
- AC_MSG_RESULT([sysconf])
-], [
-AC_COMPILE_IFELSE([AC_LANG_SOURCE([[
-#include <sys/types.h>
-#ifdef HAVE_SYS_PARAM_H
-# include <sys/param.h>
-#endif
-#include <sys/sysctl.h>
-int
-main()
-{
- int name[2] = { CTL_HW, HW_NCPU };
- int cpus;
- size_t cpus_size = sizeof(cpus);
- sysctl(name, 2, &cpus, &cpus_size, NULL, NULL);
- return 0;
-}
-]])], [
- AC_DEFINE([HAVE_NCPU_SYSCTL], [1],
- [Define to 1 if the number of available CPU cores can be
- detected with sysctl().])
- AC_MSG_RESULT([sysctl])
-], [
- AC_MSG_RESULT([unknown])
-])])
+lc_PHYSMEM
+lc_CPUCORES
###############################################################################
-# If using GCC, set some additional CFLAGS:
+# If using GCC, set some additional AM_CFLAGS:
###############################################################################
-Wno_uninitialized=no
-
-if test "x$GCC" = xyes ; then
+if test "$GCC" = yes ; then
echo
echo "GCC extensions:"
- gl_VISIBILITY
- if test -n "$CFLAG_VISIBILITY" ; then
- CFLAGS="$CFLAG_VISIBILITY $CFLAGS"
- fi
+fi
- # -Wno-uninitialized is needed with -Werror with SHA256 code
- # to omit a bogus warning.
- AC_MSG_CHECKING([if $CC accepts -Wno-uninitialized])
- OLD_CFLAGS="$CFLAGS"
- CFLAGS="$CFLAGS -Wno-uninitialized"
- AC_COMPILE_IFELSE([void foo(void) { }], [Wno_uninitialized=yes])
- CFLAGS="$OLD_CFLAGS"
- AC_MSG_RESULT([$Wno_uninitialized])
+# Always do the visibility check but don't set AM_CFLAGS on Windows.
+# This way things get set properly even on Windows.
+gl_VISIBILITY
+if test -n "$CFLAG_VISIBILITY" && test "$is_w32" = no; then
+ AM_CFLAGS="$AM_CFLAGS $CFLAG_VISIBILITY"
+fi
+if test "$GCC" = yes ; then
# Enable as much warnings as possible. These commented warnings won't
# work for this package though:
# * -Wunreachable-code breaks several assert(0) cases, which are
@@ -647,40 +582,38 @@ if test "x$GCC" = xyes ; then
# * -Winline, -Wdisabled-optimization, -Wunsafe-loop-optimizations
# don't seem so useful here; at least the last one gives some
# warnings which are not bugs.
- #
- # The flags are in reverse order below so they end up in "beautiful"
- # order on the actual command line.
for NEW_FLAG in \
- -Wredundant-decls \
- -Wmissing-noreturn \
- -Wmissing-declarations \
- -Wmissing-prototypes \
- -Wold-style-definition \
- -Wstrict-prototypes \
- -Waggregate-return \
- -Wlogical-op \
- -Wwrite-strings \
- -Wbad-function-cast \
- -Wpointer-arith \
- -Wshadow \
- -Wundef \
- -Wfloat-equal \
- -Wstrict-aliasing \
- -Wmissing-include-dirs \
- -Winit-self \
- -Wformat=2 \
+ -Wall \
-Wextra \
- -Wall
+ -Wformat=2 \
+ -Winit-self \
+ -Wmissing-include-dirs \
+ -Wstrict-aliasing \
+ -Wfloat-equal \
+ -Wundef \
+ -Wshadow \
+ -Wpointer-arith \
+ -Wbad-function-cast \
+ -Wwrite-strings \
+ -Wlogical-op \
+ -Waggregate-return \
+ -Wstrict-prototypes \
+ -Wold-style-definition \
+ -Wmissing-prototypes \
+ -Wmissing-declarations \
+ -Wmissing-noreturn \
+ -Wredundant-decls
do
AC_MSG_CHECKING([if $CC accepts $NEW_FLAG])
OLD_CFLAGS="$CFLAGS"
- CFLAGS="$NEW_FLAG $CFLAGS"
+ CFLAGS="$CFLAGS $NEW_FLAG"
AC_COMPILE_IFELSE([void foo(void) { }], [
+ AM_CFLAGS="$AM_CFLAGS $NEW_FLAG"
AC_MSG_RESULT([yes])
], [
- CFLAGS="$OLD_CFLAGS"
AC_MSG_RESULT([no])
])
+ CFLAGS="$OLD_CFLAGS"
done
AC_ARG_ENABLE([werror],
@@ -688,12 +621,10 @@ if test "x$GCC" = xyes ; then
compilation on all compiler warnings.]),
[], [enable_werror=no])
if test "x$enable_werror" = "xyes"; then
- CFLAGS="-Werror $CFLAGS"
+ AM_CFLAGS="$AM_CFLAGS -Werror"
fi
fi
-AM_CONDITIONAL([COND_WNO_UNINITIALIZED], test "x$Wno_uninitialized" = "xyes")
-
###############################################################################
# Create the makefiles and config.h
@@ -705,6 +636,52 @@ echo
# functions.
AM_CONDITIONAL([COND_GNULIB], test -n "$LIBOBJS")
+# Add default AM_CFLAGS.
+AC_SUBST([AM_CFLAGS])
+
+# Set additional flags for static/dynamic linking. The idea is that every
+# program (not library) being built will use either STATIC_{CPPFLAGS,LDFLAGS}
+# or DYNAMIC_{CPPFLAGS,LDFLAGS} depending on which type of linkage is
+# preferred. These preferences get overriden by use of --disable-static,
+# --disable-shared, or --enable-dynamic.
+#
+# This is quite messy, because we want to use LZMA_API_STATIC when linking
+# against static liblzma. It's needed on Windows.
+if test "x$enable_static" = xno; then
+ enable_dynamic=yes
+fi
+if test "x$enable_shared" = xno; then
+ enable_dynamic=no
+fi
+case $enable_dynamic in
+ yes)
+ STATIC_CPPFLAGS=
+ STATIC_LDFLAGS=
+ DYNAMIC_CPPFLAGS=
+ DYNAMIC_LDFLAGS=
+ ;;
+ mixed)
+ STATIC_CPPFLAGS="-DLZMA_API_STATIC"
+ STATIC_LDFLAGS="-static"
+ DYNAMIC_CPPFLAGS=
+ DYNAMIC_LDFLAGS=
+ ;;
+ no)
+ STATIC_CPPFLAGS="-DLZMA_API_STATIC"
+ STATIC_LDFLAGS="-static"
+ DYNAMIC_CPPFLAGS="-DLZMA_API_STATIC"
+ DYNAMIC_LDFLAGS="-static"
+ ;;
+esac
+AC_SUBST([STATIC_CPPFLAGS])
+AC_SUBST([STATIC_LDFLAGS])
+AC_SUBST([DYNAMIC_CPPFLAGS])
+AC_SUBST([DYNAMIC_LDFLAGS])
+
+# This is needed for src/scripts.
+xz=`echo xz | sed "$program_transform_name"`
+AC_SUBST([xz])
+
AC_CONFIG_FILES([
Doxyfile
Makefile
@@ -714,17 +691,14 @@ AC_CONFIG_FILES([
src/liblzma/liblzma.pc
src/liblzma/Makefile
src/liblzma/api/Makefile
- src/liblzma/common/Makefile
- src/liblzma/check/Makefile
- src/liblzma/rangecoder/Makefile
- src/liblzma/lz/Makefile
- src/liblzma/lzma/Makefile
- src/liblzma/subblock/Makefile
- src/liblzma/delta/Makefile
- src/liblzma/simple/Makefile
src/xz/Makefile
src/xzdec/Makefile
+ src/lzmainfo/Makefile
src/scripts/Makefile
+ src/scripts/xzdiff
+ src/scripts/xzgrep
+ src/scripts/xzmore
+ src/scripts/xzless
tests/Makefile
debug/Makefile
])
diff --git a/Build/source/utils/xz-4.999.9beta/debug/Makefile.am b/Build/source/utils/xz-4.999.9beta/debug/Makefile.am
new file mode 100644
index 00000000000..23834f4fcac
--- /dev/null
+++ b/Build/source/utils/xz-4.999.9beta/debug/Makefile.am
@@ -0,0 +1,30 @@
+##
+## Author: Lasse Collin
+##
+## This file has been put into the public domain.
+## You can do whatever you want with this file.
+##
+
+noinst_PROGRAMS = \
+ repeat \
+ sync_flush \
+ full_flush \
+ memusage \
+ crc32 \
+ known_sizes \
+ hex2bin
+
+AM_CPPFLAGS = \
+ -I$(top_srcdir)/src/common \
+ -I$(top_srcdir)/src/liblzma/api \
+ $(STATIC_CPPFLAGS)
+
+AM_LDFLAGS = $(STATIC_LDFLAGS)
+
+LDADD = $(top_builddir)/src/liblzma/liblzma.la
+
+if COND_GNULIB
+LDADD += $(top_builddir)/lib/libgnu.a
+endif
+
+LDADD += $(LTLIBINTL)
diff --git a/Build/source/utils/xz-4.999.8beta/debug/Makefile.in b/Build/source/utils/xz-4.999.9beta/debug/Makefile.in
index 429a9854c84..e8d6418c238 100644
--- a/Build/source/utils/xz-4.999.8beta/debug/Makefile.in
+++ b/Build/source/utils/xz-4.999.9beta/debug/Makefile.in
@@ -1,8 +1,9 @@
-# Makefile.in generated by automake 1.10.2 from Makefile.am.
+# Makefile.in generated by automake 1.11 from Makefile.am.
# @configure_input@
# Copyright (C) 1994, 1995, 1996, 1997, 1998, 1999, 2000, 2001, 2002,
-# 2003, 2004, 2005, 2006, 2007, 2008 Free Software Foundation, Inc.
+# 2003, 2004, 2005, 2006, 2007, 2008, 2009 Free Software Foundation,
+# Inc.
# This Makefile.in is free software; the Free Software Foundation
# gives unlimited permission to copy and/or distribute it,
# with or without modifications, as long as this notice is preserved.
@@ -16,8 +17,9 @@
VPATH = @srcdir@
pkgdatadir = $(datadir)/@PACKAGE@
-pkglibdir = $(libdir)/@PACKAGE@
pkgincludedir = $(includedir)/@PACKAGE@
+pkglibdir = $(libdir)/@PACKAGE@
+pkglibexecdir = $(libexecdir)/@PACKAGE@
am__cd = CDPATH="$${ZSH_VERSION+.}$(PATH_SEPARATOR)" && cd
install_sh_DATA = $(install_sh) -c -m 644
install_sh_PROGRAM = $(install_sh) -c
@@ -35,60 +37,68 @@ host_triplet = @host@
noinst_PROGRAMS = repeat$(EXEEXT) sync_flush$(EXEEXT) \
full_flush$(EXEEXT) memusage$(EXEEXT) crc32$(EXEEXT) \
known_sizes$(EXEEXT) hex2bin$(EXEEXT)
-@COND_GNULIB_TRUE@am__append_1 = @top_builddir@/lib/libgnu.a
+@COND_GNULIB_TRUE@am__append_1 = $(top_builddir)/lib/libgnu.a
subdir = debug
DIST_COMMON = README $(srcdir)/Makefile.am $(srcdir)/Makefile.in
ACLOCAL_M4 = $(top_srcdir)/aclocal.m4
am__aclocal_m4_deps = $(top_srcdir)/m4/acx_pthread.m4 \
$(top_srcdir)/m4/getopt.m4 $(top_srcdir)/m4/gettext.m4 \
- $(top_srcdir)/m4/iconv.m4 $(top_srcdir)/m4/lib-ld.m4 \
+ $(top_srcdir)/m4/iconv.m4 $(top_srcdir)/m4/lc_cpucores.m4 \
+ $(top_srcdir)/m4/lc_physmem.m4 $(top_srcdir)/m4/lib-ld.m4 \
$(top_srcdir)/m4/lib-link.m4 $(top_srcdir)/m4/lib-prefix.m4 \
- $(top_srcdir)/m4/nls.m4 $(top_srcdir)/m4/po.m4 \
- $(top_srcdir)/m4/progtest.m4 $(top_srcdir)/configure.ac
+ $(top_srcdir)/m4/libtool.m4 $(top_srcdir)/m4/ltoptions.m4 \
+ $(top_srcdir)/m4/ltsugar.m4 $(top_srcdir)/m4/ltversion.m4 \
+ $(top_srcdir)/m4/lt~obsolete.m4 $(top_srcdir)/m4/nls.m4 \
+ $(top_srcdir)/m4/po.m4 $(top_srcdir)/m4/posix-shell.m4 \
+ $(top_srcdir)/m4/progtest.m4 $(top_srcdir)/m4/visibility.m4 \
+ $(top_srcdir)/configure.ac
am__configure_deps = $(am__aclocal_m4_deps) $(CONFIGURE_DEPENDENCIES) \
$(ACLOCAL_M4)
mkinstalldirs = $(install_sh) -d
CONFIG_HEADER = $(top_builddir)/config.h
CONFIG_CLEAN_FILES =
+CONFIG_CLEAN_VPATH_FILES =
PROGRAMS = $(noinst_PROGRAMS)
crc32_SOURCES = crc32.c
crc32_OBJECTS = crc32.$(OBJEXT)
crc32_LDADD = $(LDADD)
-crc32_DEPENDENCIES = @top_builddir@/src/liblzma/liblzma.la \
- $(am__append_1)
+am__DEPENDENCIES_1 =
+crc32_DEPENDENCIES = $(top_builddir)/src/liblzma/liblzma.la \
+ $(am__append_1) $(am__DEPENDENCIES_1)
full_flush_SOURCES = full_flush.c
full_flush_OBJECTS = full_flush.$(OBJEXT)
full_flush_LDADD = $(LDADD)
-full_flush_DEPENDENCIES = @top_builddir@/src/liblzma/liblzma.la \
- $(am__append_1)
+full_flush_DEPENDENCIES = $(top_builddir)/src/liblzma/liblzma.la \
+ $(am__append_1) $(am__DEPENDENCIES_1)
hex2bin_SOURCES = hex2bin.c
hex2bin_OBJECTS = hex2bin.$(OBJEXT)
hex2bin_LDADD = $(LDADD)
-hex2bin_DEPENDENCIES = @top_builddir@/src/liblzma/liblzma.la \
- $(am__append_1)
+hex2bin_DEPENDENCIES = $(top_builddir)/src/liblzma/liblzma.la \
+ $(am__append_1) $(am__DEPENDENCIES_1)
known_sizes_SOURCES = known_sizes.c
known_sizes_OBJECTS = known_sizes.$(OBJEXT)
known_sizes_LDADD = $(LDADD)
-known_sizes_DEPENDENCIES = @top_builddir@/src/liblzma/liblzma.la \
- $(am__append_1)
+known_sizes_DEPENDENCIES = $(top_builddir)/src/liblzma/liblzma.la \
+ $(am__append_1) $(am__DEPENDENCIES_1)
memusage_SOURCES = memusage.c
memusage_OBJECTS = memusage.$(OBJEXT)
memusage_LDADD = $(LDADD)
-memusage_DEPENDENCIES = @top_builddir@/src/liblzma/liblzma.la \
- $(am__append_1)
+memusage_DEPENDENCIES = $(top_builddir)/src/liblzma/liblzma.la \
+ $(am__append_1) $(am__DEPENDENCIES_1)
repeat_SOURCES = repeat.c
repeat_OBJECTS = repeat.$(OBJEXT)
repeat_LDADD = $(LDADD)
-repeat_DEPENDENCIES = @top_builddir@/src/liblzma/liblzma.la \
- $(am__append_1)
+repeat_DEPENDENCIES = $(top_builddir)/src/liblzma/liblzma.la \
+ $(am__append_1) $(am__DEPENDENCIES_1)
sync_flush_SOURCES = sync_flush.c
sync_flush_OBJECTS = sync_flush.$(OBJEXT)
sync_flush_LDADD = $(LDADD)
-sync_flush_DEPENDENCIES = @top_builddir@/src/liblzma/liblzma.la \
- $(am__append_1)
+sync_flush_DEPENDENCIES = $(top_builddir)/src/liblzma/liblzma.la \
+ $(am__append_1) $(am__DEPENDENCIES_1)
DEFAULT_INCLUDES = -I.@am__isrc@ -I$(top_builddir)
-depcomp = $(SHELL) $(top_srcdir)/depcomp
+depcomp = $(SHELL) $(top_srcdir)/build-aux/depcomp
am__depfiles_maybe = depfiles
+am__mv = mv -f
COMPILE = $(CC) $(DEFS) $(DEFAULT_INCLUDES) $(INCLUDES) $(AM_CPPFLAGS) \
$(CPPFLAGS) $(AM_CFLAGS) $(CFLAGS)
LTCOMPILE = $(LIBTOOL) --tag=CC $(AM_LIBTOOLFLAGS) $(LIBTOOLFLAGS) \
@@ -107,7 +117,9 @@ CTAGS = ctags
DISTFILES = $(DIST_COMMON) $(DIST_SOURCES) $(TEXINFOS) $(EXTRA_DIST)
ACLOCAL = @ACLOCAL@
AMTAR = @AMTAR@
+AM_CFLAGS = @AM_CFLAGS@
AR = @AR@
+AS = @AS@
AUTOCONF = @AUTOCONF@
AUTOHEADER = @AUTOHEADER@
AUTOMAKE = @AUTOMAKE@
@@ -121,22 +133,20 @@ CFLAGS = @CFLAGS@
CFLAG_VISIBILITY = @CFLAG_VISIBILITY@
CPP = @CPP@
CPPFLAGS = @CPPFLAGS@
-CXX = @CXX@
-CXXCPP = @CXXCPP@
-CXXDEPMODE = @CXXDEPMODE@
-CXXFLAGS = @CXXFLAGS@
CYGPATH_W = @CYGPATH_W@
DEFS = @DEFS@
DEPDIR = @DEPDIR@
+DLLTOOL = @DLLTOOL@
DSYMUTIL = @DSYMUTIL@
-ECHO = @ECHO@
+DUMPBIN = @DUMPBIN@
+DYNAMIC_CPPFLAGS = @DYNAMIC_CPPFLAGS@
+DYNAMIC_LDFLAGS = @DYNAMIC_LDFLAGS@
ECHO_C = @ECHO_C@
ECHO_N = @ECHO_N@
ECHO_T = @ECHO_T@
EGREP = @EGREP@
EXEEXT = @EXEEXT@
-F77 = @F77@
-FFLAGS = @FFLAGS@
+FGREP = @FGREP@
GETOPT_H = @GETOPT_H@
GMSGFMT = @GMSGFMT@
GMSGFMT_015 = @GMSGFMT_015@
@@ -149,12 +159,14 @@ INSTALL_SCRIPT = @INSTALL_SCRIPT@
INSTALL_STRIP_PROGRAM = @INSTALL_STRIP_PROGRAM@
INTLLIBS = @INTLLIBS@
INTL_MACOSX_LIBS = @INTL_MACOSX_LIBS@
+LD = @LD@
LDFLAGS = @LDFLAGS@
LIBICONV = @LIBICONV@
LIBINTL = @LIBINTL@
LIBOBJS = @LIBOBJS@
LIBS = @LIBS@
LIBTOOL = @LIBTOOL@
+LIPO = @LIPO@
LN_S = @LN_S@
LTLIBICONV = @LTLIBICONV@
LTLIBINTL = @LTLIBINTL@
@@ -164,23 +176,34 @@ MKDIR_P = @MKDIR_P@
MSGFMT = @MSGFMT@
MSGFMT_015 = @MSGFMT_015@
MSGMERGE = @MSGMERGE@
+NM = @NM@
NMEDIT = @NMEDIT@
+OBJDUMP = @OBJDUMP@
OBJEXT = @OBJEXT@
+OTOOL = @OTOOL@
+OTOOL64 = @OTOOL64@
PACKAGE = @PACKAGE@
PACKAGE_BUGREPORT = @PACKAGE_BUGREPORT@
+PACKAGE_HOMEPAGE = @PACKAGE_HOMEPAGE@
PACKAGE_NAME = @PACKAGE_NAME@
PACKAGE_STRING = @PACKAGE_STRING@
PACKAGE_TARNAME = @PACKAGE_TARNAME@
+PACKAGE_URL = @PACKAGE_URL@
PACKAGE_VERSION = @PACKAGE_VERSION@
PATH_SEPARATOR = @PATH_SEPARATOR@
+POSIX_SHELL = @POSIX_SHELL@
POSUB = @POSUB@
+PREFERABLY_POSIX_SHELL = @PREFERABLY_POSIX_SHELL@
PTHREAD_CC = @PTHREAD_CC@
PTHREAD_CFLAGS = @PTHREAD_CFLAGS@
PTHREAD_LIBS = @PTHREAD_LIBS@
RANLIB = @RANLIB@
+RC = @RC@
SED = @SED@
SET_MAKE = @SET_MAKE@
SHELL = @SHELL@
+STATIC_CPPFLAGS = @STATIC_CPPFLAGS@
+STATIC_LDFLAGS = @STATIC_LDFLAGS@
STRIP = @STRIP@
USE_NLS = @USE_NLS@
VERSION = @VERSION@
@@ -191,8 +214,7 @@ abs_srcdir = @abs_srcdir@
abs_top_builddir = @abs_top_builddir@
abs_top_srcdir = @abs_top_srcdir@
ac_ct_CC = @ac_ct_CC@
-ac_ct_CXX = @ac_ct_CXX@
-ac_ct_F77 = @ac_ct_F77@
+ac_ct_DUMPBIN = @ac_ct_DUMPBIN@
acx_pthread_config = @acx_pthread_config@
am__include = @am__include@
am__leading_dot = @am__leading_dot@
@@ -224,6 +246,7 @@ libdir = @libdir@
libexecdir = @libexecdir@
localedir = @localedir@
localstatedir = @localstatedir@
+lt_ECHO = @lt_ECHO@
mandir = @mandir@
mkdir_p = @mkdir_p@
oldincludedir = @oldincludedir@
@@ -239,13 +262,15 @@ target_alias = @target_alias@
top_build_prefix = @top_build_prefix@
top_builddir = @top_builddir@
top_srcdir = @top_srcdir@
+xz = @xz@
AM_CPPFLAGS = \
- -I@top_srcdir@/src/common \
- -I@top_srcdir@/src/liblzma/api
+ -I$(top_srcdir)/src/common \
+ -I$(top_srcdir)/src/liblzma/api \
+ $(STATIC_CPPFLAGS)
-AM_LDFLAGS = -static
-LDADD = @top_builddir@/src/liblzma/liblzma.la @LTLIBINTL@ \
- $(am__append_1)
+AM_LDFLAGS = $(STATIC_LDFLAGS)
+LDADD = $(top_builddir)/src/liblzma/liblzma.la $(am__append_1) \
+ $(LTLIBINTL)
all: all-am
.SUFFIXES:
@@ -259,9 +284,9 @@ $(srcdir)/Makefile.in: $(srcdir)/Makefile.am $(am__configure_deps)
exit 1;; \
esac; \
done; \
- echo ' cd $(top_srcdir) && $(AUTOMAKE) --foreign debug/Makefile'; \
- cd $(top_srcdir) && \
- $(AUTOMAKE) --foreign debug/Makefile
+ echo ' cd $(top_srcdir) && $(AUTOMAKE) --foreign debug/Makefile'; \
+ $(am__cd) $(top_srcdir) && \
+ $(AUTOMAKE) --foreign debug/Makefile
.PRECIOUS: Makefile
Makefile: $(srcdir)/Makefile.in $(top_builddir)/config.status
@case '$?' in \
@@ -279,13 +304,16 @@ $(top_srcdir)/configure: $(am__configure_deps)
cd $(top_builddir) && $(MAKE) $(AM_MAKEFLAGS) am--refresh
$(ACLOCAL_M4): $(am__aclocal_m4_deps)
cd $(top_builddir) && $(MAKE) $(AM_MAKEFLAGS) am--refresh
+$(am__aclocal_m4_deps):
clean-noinstPROGRAMS:
- @list='$(noinst_PROGRAMS)'; for p in $$list; do \
- f=`echo $$p|sed 's/$(EXEEXT)$$//'`; \
- echo " rm -f $$p $$f"; \
- rm -f $$p $$f ; \
- done
+ @list='$(noinst_PROGRAMS)'; test -n "$$list" || exit 0; \
+ echo " rm -f" $$list; \
+ rm -f $$list || exit $$?; \
+ test -n "$(EXEEXT)" || exit 0; \
+ list=`for p in $$list; do echo "$$p"; done | sed 's/$(EXEEXT)$$//'`; \
+ echo " rm -f" $$list; \
+ rm -f $$list
crc32$(EXEEXT): $(crc32_OBJECTS) $(crc32_DEPENDENCIES)
@rm -f crc32$(EXEEXT)
$(LINK) $(crc32_OBJECTS) $(crc32_LDADD) $(LIBS)
@@ -324,21 +352,21 @@ distclean-compile:
.c.o:
@am__fastdepCC_TRUE@ $(COMPILE) -MT $@ -MD -MP -MF $(DEPDIR)/$*.Tpo -c -o $@ $<
-@am__fastdepCC_TRUE@ mv -f $(DEPDIR)/$*.Tpo $(DEPDIR)/$*.Po
+@am__fastdepCC_TRUE@ $(am__mv) $(DEPDIR)/$*.Tpo $(DEPDIR)/$*.Po
@AMDEP_TRUE@@am__fastdepCC_FALSE@ source='$<' object='$@' libtool=no @AMDEPBACKSLASH@
@AMDEP_TRUE@@am__fastdepCC_FALSE@ DEPDIR=$(DEPDIR) $(CCDEPMODE) $(depcomp) @AMDEPBACKSLASH@
@am__fastdepCC_FALSE@ $(COMPILE) -c $<
.c.obj:
@am__fastdepCC_TRUE@ $(COMPILE) -MT $@ -MD -MP -MF $(DEPDIR)/$*.Tpo -c -o $@ `$(CYGPATH_W) '$<'`
-@am__fastdepCC_TRUE@ mv -f $(DEPDIR)/$*.Tpo $(DEPDIR)/$*.Po
+@am__fastdepCC_TRUE@ $(am__mv) $(DEPDIR)/$*.Tpo $(DEPDIR)/$*.Po
@AMDEP_TRUE@@am__fastdepCC_FALSE@ source='$<' object='$@' libtool=no @AMDEPBACKSLASH@
@AMDEP_TRUE@@am__fastdepCC_FALSE@ DEPDIR=$(DEPDIR) $(CCDEPMODE) $(depcomp) @AMDEPBACKSLASH@
@am__fastdepCC_FALSE@ $(COMPILE) -c `$(CYGPATH_W) '$<'`
.c.lo:
@am__fastdepCC_TRUE@ $(LTCOMPILE) -MT $@ -MD -MP -MF $(DEPDIR)/$*.Tpo -c -o $@ $<
-@am__fastdepCC_TRUE@ mv -f $(DEPDIR)/$*.Tpo $(DEPDIR)/$*.Plo
+@am__fastdepCC_TRUE@ $(am__mv) $(DEPDIR)/$*.Tpo $(DEPDIR)/$*.Plo
@AMDEP_TRUE@@am__fastdepCC_FALSE@ source='$<' object='$@' libtool=yes @AMDEPBACKSLASH@
@AMDEP_TRUE@@am__fastdepCC_FALSE@ DEPDIR=$(DEPDIR) $(CCDEPMODE) $(depcomp) @AMDEPBACKSLASH@
@am__fastdepCC_FALSE@ $(LTCOMPILE) -c -o $@ $<
@@ -361,7 +389,7 @@ tags: TAGS
TAGS: $(HEADERS) $(SOURCES) $(TAGS_DEPENDENCIES) \
$(TAGS_FILES) $(LISP)
- tags=; \
+ set x; \
here=`pwd`; \
list='$(SOURCES) $(HEADERS) $(LISP) $(TAGS_FILES)'; \
unique=`for i in $$list; do \
@@ -369,29 +397,34 @@ TAGS: $(HEADERS) $(SOURCES) $(TAGS_DEPENDENCIES) \
done | \
$(AWK) '{ files[$$0] = 1; nonempty = 1; } \
END { if (nonempty) { for (i in files) print i; }; }'`; \
- if test -z "$(ETAGS_ARGS)$$tags$$unique"; then :; else \
+ shift; \
+ if test -z "$(ETAGS_ARGS)$$*$$unique"; then :; else \
test -n "$$unique" || unique=$$empty_fix; \
- $(ETAGS) $(ETAGSFLAGS) $(AM_ETAGSFLAGS) $(ETAGS_ARGS) \
- $$tags $$unique; \
+ if test $$# -gt 0; then \
+ $(ETAGS) $(ETAGSFLAGS) $(AM_ETAGSFLAGS) $(ETAGS_ARGS) \
+ "$$@" $$unique; \
+ else \
+ $(ETAGS) $(ETAGSFLAGS) $(AM_ETAGSFLAGS) $(ETAGS_ARGS) \
+ $$unique; \
+ fi; \
fi
ctags: CTAGS
CTAGS: $(HEADERS) $(SOURCES) $(TAGS_DEPENDENCIES) \
$(TAGS_FILES) $(LISP)
- tags=; \
list='$(SOURCES) $(HEADERS) $(LISP) $(TAGS_FILES)'; \
unique=`for i in $$list; do \
if test -f "$$i"; then echo $$i; else echo $(srcdir)/$$i; fi; \
done | \
$(AWK) '{ files[$$0] = 1; nonempty = 1; } \
END { if (nonempty) { for (i in files) print i; }; }'`; \
- test -z "$(CTAGS_ARGS)$$tags$$unique" \
+ test -z "$(CTAGS_ARGS)$$unique" \
|| $(CTAGS) $(CTAGSFLAGS) $(AM_CTAGSFLAGS) $(CTAGS_ARGS) \
- $$tags $$unique
+ $$unique
GTAGS:
here=`$(am__cd) $(top_builddir) && pwd` \
- && cd $(top_srcdir) \
- && gtags -i $(GTAGS_ARGS) $$here
+ && $(am__cd) $(top_srcdir) \
+ && gtags -i $(GTAGS_ARGS) "$$here"
distclean-tags:
-rm -f TAGS ID GTAGS GRTAGS GSYMS GPATH tags
@@ -412,13 +445,17 @@ distdir: $(DISTFILES)
if test -f $$file || test -d $$file; then d=.; else d=$(srcdir); fi; \
if test -d $$d/$$file; then \
dir=`echo "/$$file" | sed -e 's,/[^/]*$$,,'`; \
+ if test -d "$(distdir)/$$file"; then \
+ find "$(distdir)/$$file" -type d ! -perm -700 -exec chmod u+rwx {} \;; \
+ fi; \
if test -d $(srcdir)/$$file && test $$d != $(srcdir); then \
- cp -pR $(srcdir)/$$file $(distdir)$$dir || exit 1; \
+ cp -fpR $(srcdir)/$$file "$(distdir)$$dir" || exit 1; \
+ find "$(distdir)/$$file" -type d ! -perm -700 -exec chmod u+rwx {} \;; \
fi; \
- cp -pR $$d/$$file $(distdir)$$dir || exit 1; \
+ cp -fpR $$d/$$file "$(distdir)$$dir" || exit 1; \
else \
- test -f $(distdir)/$$file \
- || cp -p $$d/$$file $(distdir)/$$file \
+ test -f "$(distdir)/$$file" \
+ || cp -p $$d/$$file "$(distdir)/$$file" \
|| exit 1; \
fi; \
done
@@ -446,6 +483,7 @@ clean-generic:
distclean-generic:
-test -z "$(CONFIG_CLEAN_FILES)" || rm -f $(CONFIG_CLEAN_FILES)
+ -test . = "$(srcdir)" || test -z "$(CONFIG_CLEAN_VPATH_FILES)" || rm -f $(CONFIG_CLEAN_VPATH_FILES)
maintainer-clean-generic:
@echo "This command is intended for maintainers to use"
@@ -467,6 +505,8 @@ dvi-am:
html: html-am
+html-am:
+
info: info-am
info-am:
@@ -475,18 +515,28 @@ install-data-am:
install-dvi: install-dvi-am
+install-dvi-am:
+
install-exec-am:
install-html: install-html-am
+install-html-am:
+
install-info: install-info-am
+install-info-am:
+
install-man:
install-pdf: install-pdf-am
+install-pdf-am:
+
install-ps: install-ps-am
+install-ps-am:
+
installcheck-am:
maintainer-clean: maintainer-clean-am
@@ -524,6 +574,7 @@ uninstall-am:
mostlyclean-compile mostlyclean-generic mostlyclean-libtool \
pdf pdf-am ps ps-am tags uninstall uninstall-am
+
# Tell versions [3.59,3.63) of GNU make to not export all variables.
# Otherwise a system limit (for SysV at least) may be exceeded.
.NOEXPORT:
diff --git a/Build/source/utils/xz-4.999.8beta/debug/README b/Build/source/utils/xz-4.999.9beta/debug/README
index 749610d77c0..749610d77c0 100644
--- a/Build/source/utils/xz-4.999.8beta/debug/README
+++ b/Build/source/utils/xz-4.999.9beta/debug/README
diff --git a/Build/source/utils/xz-4.999.8beta/debug/crc32.c b/Build/source/utils/xz-4.999.9beta/debug/crc32.c
index 4052a863ee6..0fe46511f03 100644
--- a/Build/source/utils/xz-4.999.8beta/debug/crc32.c
+++ b/Build/source/utils/xz-4.999.9beta/debug/crc32.c
@@ -3,17 +3,10 @@
/// \file crc32.c
/// \brief Primitive CRC32 calculation tool
//
-// Copyright (C) 2008 Lasse Collin
+// Author: Lasse Collin
//
-// This library is free software; you can redistribute it and/or
-// modify it under the terms of the GNU Lesser General Public
-// License as published by the Free Software Foundation; either
-// version 2.1 of the License, or (at your option) any later version.
-//
-// This library is distributed in the hope that it will be useful,
-// but WITHOUT ANY WARRANTY; without even the implied warranty of
-// MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the GNU
-// Lesser General Public License for more details.
+// This file has been put into the public domain.
+// You can do whatever you want with this file.
//
///////////////////////////////////////////////////////////////////////////////
diff --git a/Build/source/utils/xz-4.999.8beta/debug/full_flush.c b/Build/source/utils/xz-4.999.9beta/debug/full_flush.c
index 6b22898b758..ce0d2e8940e 100644
--- a/Build/source/utils/xz-4.999.8beta/debug/full_flush.c
+++ b/Build/source/utils/xz-4.999.9beta/debug/full_flush.c
@@ -3,21 +3,15 @@
/// \file full_flush.c
/// \brief Encode files using LZMA_FULL_FLUSH
//
-// Copyright (C) 2008 Lasse Collin
+// Author: Lasse Collin
//
-// This library is free software; you can redistribute it and/or
-// modify it under the terms of the GNU Lesser General Public
-// License as published by the Free Software Foundation; either
-// version 2.1 of the License, or (at your option) any later version.
-//
-// This library is distributed in the hope that it will be useful,
-// but WITHOUT ANY WARRANTY; without even the implied warranty of
-// MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the GNU
-// Lesser General Public License for more details.
+// This file has been put into the public domain.
+// You can do whatever you want with this file.
//
///////////////////////////////////////////////////////////////////////////////
#include "sysdefs.h"
+#include "lzma.h"
#include <stdio.h>
diff --git a/Build/source/utils/xz-4.999.8beta/debug/hex2bin.c b/Build/source/utils/xz-4.999.9beta/debug/hex2bin.c
index ebfc289f3f8..73246244746 100644
--- a/Build/source/utils/xz-4.999.8beta/debug/hex2bin.c
+++ b/Build/source/utils/xz-4.999.9beta/debug/hex2bin.c
@@ -3,11 +3,10 @@
/// \file hex2bin.c
/// \brief Converts hexadecimal input strings to binary
//
-// This code has been put into the public domain.
+// Author: Lasse Collin
//
-// This library is distributed in the hope that it will be useful,
-// but WITHOUT ANY WARRANTY; without even the implied warranty of
-// MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.
+// This file has been put into the public domain.
+// You can do whatever you want with this file.
//
///////////////////////////////////////////////////////////////////////////////
diff --git a/Build/source/utils/xz-4.999.8beta/debug/known_sizes.c b/Build/source/utils/xz-4.999.9beta/debug/known_sizes.c
index 643f8407378..cdee26dfd8e 100644
--- a/Build/source/utils/xz-4.999.8beta/debug/known_sizes.c
+++ b/Build/source/utils/xz-4.999.9beta/debug/known_sizes.c
@@ -7,21 +7,15 @@
/// and/or Uncompressed Size values are stored in the Block Header.
/// As of writing there's no such Stream encoder in liblzma.
//
-// Copyright (C) 2008 Lasse Collin
+// Author: Lasse Collin
//
-// This library is free software; you can redistribute it and/or
-// modify it under the terms of the GNU Lesser General Public
-// License as published by the Free Software Foundation; either
-// version 2.1 of the License, or (at your option) any later version.
-//
-// This library is distributed in the hope that it will be useful,
-// but WITHOUT ANY WARRANTY; without even the implied warranty of
-// MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the GNU
-// Lesser General Public License for more details.
+// This file has been put into the public domain.
+// You can do whatever you want with this file.
//
///////////////////////////////////////////////////////////////////////////////
#include "sysdefs.h"
+#include "lzma.h"
#include <sys/types.h>
#include <sys/stat.h>
#include <sys/unistd.h>
diff --git a/Build/source/utils/xz-4.999.8beta/debug/memusage.c b/Build/source/utils/xz-4.999.9beta/debug/memusage.c
index 15efe3d48ef..93fe0b2ca79 100644
--- a/Build/source/utils/xz-4.999.8beta/debug/memusage.c
+++ b/Build/source/utils/xz-4.999.9beta/debug/memusage.c
@@ -2,22 +2,16 @@
//
/// \file memusage.c
/// \brief Calculates memory usage using lzma_memory_usage()
-///
-// Copyright (C) 2008 Lasse Collin
//
-// This library is free software; you can redistribute it and/or
-// modify it under the terms of the GNU Lesser General Public
-// License as published by the Free Software Foundation; either
-// version 2.1 of the License, or (at your option) any later version.
+// Author: Lasse Collin
//
-// This library is distributed in the hope that it will be useful,
-// but WITHOUT ANY WARRANTY; without even the implied warranty of
-// MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the GNU
-// Lesser General Public License for more details.
+// This file has been put into the public domain.
+// You can do whatever you want with this file.
//
///////////////////////////////////////////////////////////////////////////////
#include "sysdefs.h"
+#include "lzma.h"
#include <stdio.h>
int
diff --git a/Build/source/utils/xz-4.999.8beta/debug/repeat.c b/Build/source/utils/xz-4.999.9beta/debug/repeat.c
index 849f7b76ff9..a00bde2cd38 100644
--- a/Build/source/utils/xz-4.999.8beta/debug/repeat.c
+++ b/Build/source/utils/xz-4.999.9beta/debug/repeat.c
@@ -7,17 +7,10 @@
/// the Subblock filter, especially the condition when repeat count
/// doesn't fit into 28-bit integer.
//
-// Copyright (C) 2008 Lasse Collin
+// Author: Lasse Collin
//
-// This library is free software; you can redistribute it and/or
-// modify it under the terms of the GNU Lesser General Public
-// License as published by the Free Software Foundation; either
-// version 2.1 of the License, or (at your option) any later version.
-//
-// This library is distributed in the hope that it will be useful,
-// but WITHOUT ANY WARRANTY; without even the implied warranty of
-// MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the GNU
-// Lesser General Public License for more details.
+// This file has been put into the public domain.
+// You can do whatever you want with this file.
//
///////////////////////////////////////////////////////////////////////////////
diff --git a/Build/source/utils/xz-4.999.8beta/debug/sync_flush.c b/Build/source/utils/xz-4.999.9beta/debug/sync_flush.c
index 076fb7e75ff..1dccbdaacbd 100644
--- a/Build/source/utils/xz-4.999.8beta/debug/sync_flush.c
+++ b/Build/source/utils/xz-4.999.9beta/debug/sync_flush.c
@@ -3,21 +3,15 @@
/// \file sync_flush.c
/// \brief Encode files using LZMA_SYNC_FLUSH
//
-// Copyright (C) 2008 Lasse Collin
+// Author: Lasse Collin
//
-// This library is free software; you can redistribute it and/or
-// modify it under the terms of the GNU Lesser General Public
-// License as published by the Free Software Foundation; either
-// version 2.1 of the License, or (at your option) any later version.
-//
-// This library is distributed in the hope that it will be useful,
-// but WITHOUT ANY WARRANTY; without even the implied warranty of
-// MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the GNU
-// Lesser General Public License for more details.
+// This file has been put into the public domain.
+// You can do whatever you want with this file.
//
///////////////////////////////////////////////////////////////////////////////
#include "sysdefs.h"
+#include "lzma.h"
#include <stdio.h>
diff --git a/Build/source/utils/xz-4.999.9beta/doc/faq.txt b/Build/source/utils/xz-4.999.9beta/doc/faq.txt
new file mode 100644
index 00000000000..48c4ec711b8
--- /dev/null
+++ b/Build/source/utils/xz-4.999.9beta/doc/faq.txt
@@ -0,0 +1,122 @@
+
+XZ Utils FAQ
+============
+
+Q: What do the letters XZ mean?
+
+A: Nothing. They are just two letters, which come from the file format
+ suffix .xz. The .xz suffix was selected, because it seemed to be
+ pretty much unused. It is no deeper meaning.
+
+
+Q: What are LZMA and LZMA2?
+
+A: LZMA stands for Lempel-Ziv-Markov chain-Algorithm. It is the name
+ of the compression algorithm designed by Igor Pavlov for 7-Zip.
+ LZMA is based on LZ77 and range encoding.
+
+ LZMA2 is an updated version of the original LZMA to fix a couple of
+ practical issues. In context of XZ Utils, LZMA is called LZMA1 to
+ emphasize that LZMA is not the same thing as LZMA2. LZMA2 is the
+ primary compression algorithm in the .xz file format.
+
+
+Q: There are many LZMA related projects. How does XZ Utils relate to them?
+
+A: 7-Zip and LZMA SDK are the original projects. LZMA SDK is roughly
+ a subset of the 7-Zip source tree.
+
+ p7zip is 7-Zip's command line tools ported to POSIX-like systems.
+
+ LZMA Utils provide a gzip-like lzma tool for POSIX-like systems.
+ LZMA Utils are based on LZMA SDK. XZ Utils are the successor to
+ LZMA Utils.
+
+ There are several other projects using LZMA. Most are more or less
+ based on LZMA SDK.
+
+
+Q: Do XZ Utils support the .7z format?
+
+A: No. Use 7-Zip (Windows) or p7zip (POSIX-like systems) to handle .7z
+ files.
+
+
+Q: I have many .tar.7z files. Can I convert them to .tar.xz without
+ spending hours recompressing the data?
+
+A: In the "extra" directory, there is a script named 7z2lzma.bash which
+ is able to convert some .7z files to the .lzma format (not .xz). It
+ needs the 7za (or 7z) command from p7zip. The script may silently
+ produce corrupt output if certain assumptions are not met, so
+ decompress the resulting .lzma file and compare it against the
+ original before deleting the original file!
+
+
+Q: I have many .lzma files. Can I quickly convert them to the .xz format?
+
+A: For now, no. Since XZ Utils supports the .lzma format, it's usually
+ not too bad to keep the old files in the old format. If you want to
+ do the conversion anyway, you need to decompress the .lzma files and
+ then recompress to the .xz format.
+
+ Technically, there is a way to make the conversion relatively fast
+ (roughly twice the time that normal decompression takes). Writing
+ such a tool would take quite a bit time though, and would probably
+ be useful to only a few people. If you really want such a conversion
+ tool, contact Lasse Collin and offer some money.
+
+
+Q: Can I recover parts of a broken .xz file (e.g. corrupted CD-R)?
+
+A: It may be possible if the file consists of multiple blocks, which
+ typically is not the case if the file was created in single-threaded
+ mode. There is no recovery program yet.
+
+
+Q: Is (some part of) XZ Utils patented?
+
+A: Lasse Collin is not aware of any patents that could affect XZ Utils.
+ However, due to nature of software patents, it's not possible to
+ guarantee that XZ Utils isn't affected by any third party patent(s).
+
+
+Q: Where can I find documentation about the file format and algorithms?
+
+A: The .xz format is documented in xz-file-format.txt. It is a container
+ format only, and doesn't include descriptions of any non-trivial
+ filters.
+
+ Documenting LZMA and LZMA2 is planned, but for now, there is no other
+ documentation that the source code. Before you begin, you should know
+ the basics of LZ77 and range coding algorithms. LZMA is based on LZ77,
+ but LZMA is *a lot* more complex. Range coding is used to compress
+ the final bitstream like Huffman coding is used in Deflate.
+
+
+Q: I cannot find BCJ and BCJ2 filters. Don't they exist in liblzma?
+
+A: BCJ filter is called "x86" in liblzma. BCJ2 is not included,
+ because it requires using more than one encoded output stream.
+
+
+Q: How do I build a program that needs liblzmadec (lzmadec.h)?
+
+A: liblzmadec is part of LZMA Utils. XZ Utils has liblzma, but no
+ liblzmadec. The code using liblzmadec should be ported to use
+ liblzma instead. If you cannot or don't want to do that, download
+ LZMA Utils from <http://tukaani.org/lzma/>.
+
+
+Q: The default build of liblzma is too big. How can I make it smaller?
+
+A: Give --enable-small to the configure script. Use also appropriate
+ --enable or --disable options to include only those filter encoders
+ and decoders and integrity checks that you actually need. Use
+ CFLAGS=-Os (with GCC) or equivalent to tell your compiler to optimize
+ for size. See INSTALL for information about configure options.
+
+ If the result is still too big, take a look at XZ Embedded. It is
+ a separate project, which provides a limited but signinificantly
+ smaller XZ decoder implementation than XZ Utils.
+
diff --git a/Build/source/utils/xz-4.999.9beta/doc/history.txt b/Build/source/utils/xz-4.999.9beta/doc/history.txt
new file mode 100644
index 00000000000..c97492e81a0
--- /dev/null
+++ b/Build/source/utils/xz-4.999.9beta/doc/history.txt
@@ -0,0 +1,149 @@
+
+History of LZMA Utils and XZ Utils
+==================================
+
+Tukaani distribution
+
+ In 2005, there was a small group working on Tukaani distribution, which
+ was a Slackware fork. One of the project goals was to fit the distro on
+ a single 700 MiB ISO-9660 image. Using LZMA instead of gzip helped a
+ lot. Roughly speaking, one could fit data that took 1000 MiB in gzipped
+ form into 700 MiB with LZMA. Naturally compression ratio varied across
+ packages, but this was what we got on average.
+
+ Slackware packages have traditionally had .tgz as the filename suffix,
+ which is an abbreviation of .tar.gz. A logical naming for LZMA
+ compressed packages was .tlz, being an abbreviation of .tar.lzma.
+
+ At the end of the year 2007, there was no distribution under the
+ Tukaani project anymore, but development of LZMA Utils was kept going.
+ Still, there were .tlz packages around, because at least Vector Linux
+ (a Slackware based distribution) used LZMA for its packages.
+
+ First versions of the modified pkgtools used the LZMA_Alone tool from
+ Igor Pavlov's LZMA SDK as is. It was fine, because users wouldn't need
+ to interact with LZMA_Alone directly. But people soon wanted to use
+ LZMA for other files too, and the interface of LZMA_Alone wasn't
+ comfortable for those used to gzip and bzip2.
+
+
+First steps of LZMA Utils
+
+ The first version of LZMA Utils (4.22.0) included a shell script called
+ lzmash. It was wrapper that had gzip-like command line interface. It
+ used the LZMA_Alone tool from LZMA SDK to do all the real work. zgrep,
+ zdiff, and related scripts from gzip were adapted work with LZMA and
+ were part of the first LZMA Utils release too.
+
+ LZMA Utils 4.22.0 included also lzmadec, which was a small (less than
+ 10 KiB) decoder-only command line tool. It was written on top of the
+ decoder-only C code found from the LZMA SDK. lzmadec was convenient in
+ situations where LZMA_Alone (a few hundred KiB) would be too big.
+
+ lzmash and lzmadec were written by Lasse Collin.
+
+
+Second generation
+
+ The lzmash script was an ugly and not very secure hack. The last
+ version of LZMA Utils to use lzmash was 4.27.1.
+
+ LZMA Utils 4.32.0beta1 introduced a new lzma command line tool written
+ by Ville Koskinen. It was written in C++, and used the encoder and
+ decoder from C++ LZMA SDK with little modifications. This tool replaced
+ both the lzmash script and the LZMA_Alone command line tool in LZMA
+ Utils.
+
+ Introducing this new tool caused some temporary incompatibilities,
+ because LZMA_Alone executable was simply named lzma like the new
+ command line tool, but they had completely different command line
+ interface. The file format was still the same.
+
+ Lasse wrote liblzmadec, which was a small decoder-only library based
+ on the C code found from LZMA SDK. liblzmadec had API similar to zlib,
+ although there were some significant differences, which made it
+ non-trivial to use it in some applications designed for zlib and
+ libbzip2.
+
+ The lzmadec command line tool was converted to use liblzmadec.
+
+ Alexandre Sauvé helped converting build system to use GNU Autotools.
+ This made is easier to test for certain less portable features needed
+ by the new command line tool.
+
+ Since the new command line tool never got completely finished (for
+ example, it didn't support LZMA_OPT environment variable), the intent
+ was to not call 4.32.x stable. Similarly, liblzmadec wasn't polished,
+ but appeared to work well enough, so some people started using it too.
+
+ Because the development of the third generation of LZMA Utils was
+ delayed considerably (3-4 years), the 4.32.x branch had to be kept
+ maintained. It got some bug fixes now and then, and finally it was
+ decided to call it stable, although most of the missing features were
+ never added.
+
+
+File format problems
+
+ The file format used by LZMA_Alone was primitive. It was designed for
+ embedded systems in mind, and thus provided only minimal set of
+ features. The two biggest problems for non-embedded use were lack of
+ magic bytes and integrity check.
+
+ Igor and Lasse started developing a new file format with some help
+ from Ville Koskinen. Also Mark Adler, Mikko Pouru, H. Peter Anvin,
+ and Lars Wirzenius helped with some minor things at some point of the
+ development. Designing the new format took quite a long time (actually,
+ too long time would be more appropriate expression). It was mostly
+ because Lasse was quite slow at getting things done due to personal
+ reasons.
+
+ Originally the new format was supposed to use the same .lzma suffix
+ that was already used by the old file format. Switching to the new
+ format wouldn't have caused much trouble when the old format wasn't
+ used by many people. But since the development of the new format took
+ so long time, the old format got quite popular, and it was decided
+ that the new file format must use a different suffix.
+
+ It was decided to use .xz as the suffix of the new file format. The
+ first stable .xz file format specification was finally released in
+ December 2008. In addition to fixing the most obvious problems of
+ the old .lzma format, the .xz format added some new features like
+ support for multiple filters (compression algorithms), filter chaining
+ (like piping on the command line), and limited random-access reading.
+
+ Currently the primary compression algorithm used in .xz is LZMA2.
+ It is an extension on top of the original LZMA to fix some practical
+ problems: LZMA2 adds support for flushing the encoder, uncompressed
+ chunks, eases stateful decoder implementations, and improves support
+ for multithreading. Since LZMA2 is better than the original LZMA, the
+ original LZMA is not supported in .xz.
+
+
+Transition to XZ Utils
+
+ The early versions of XZ Utils were called LZMA Utils. The first
+ releases were 4.42.0alphas. They dropped the rest of the C++ LZMA SDK.
+ The code was still directly based on LZMA SDK but ported to C and
+ converted from callback API to stateful API. Later, Igor Pavlov made
+ C version of the LZMA encoder too; these ports from C++ to C were
+ independent in LZMA SDK and LZMA Utils.
+
+ The core of the new LZMA Utils was liblzma, a compression library with
+ zlib-like API. liblzma supported both the old and new file format. The
+ gzip-like lzma command line tool was rewritten to use liblzma.
+
+ The new LZMA Utils code base was renamed to XZ Utils when the name
+ of the new file format had been decided. The liblzma compression
+ library retained its name though, because changing it would have
+ caused unnecessary breakage in applications already using the early
+ liblzma snapshots.
+
+ The xz command line tool can emulate the gzip-like lzma tool by
+ creating appropriate symlinks (e.g. lzma -> xz). Thus, practically
+ all scripts using the lzma tool from LZMA Utils will work as is with
+ XZ Utils (and will keep using the old .lzma format). Still, the .lzma
+ format is more or less deprecated. XZ Utils will keep supporting it,
+ but new applications should use the .xz format, and migrating old
+ applications to .xz is often a good idea too.
+
diff --git a/Build/source/utils/xz-4.999.9beta/doc/lzma-file-format.txt b/Build/source/utils/xz-4.999.9beta/doc/lzma-file-format.txt
new file mode 100644
index 00000000000..21fcb19fdcd
--- /dev/null
+++ b/Build/source/utils/xz-4.999.9beta/doc/lzma-file-format.txt
@@ -0,0 +1,166 @@
+
+The .lzma File Format
+=====================
+
+ 0. Preface
+ 0.1. Notices and Acknowledgements
+ 0.2. Changes
+ 1. File Format
+ 1.1. Header
+ 1.1.1. Properties
+ 1.1.2. Dictionary Size
+ 1.1.3. Uncompressed Size
+ 1.2. LZMA Compressed Data
+ 2. References
+
+
+0. Preface
+
+ This document describes the .lzma file format, which is
+ sometimes also called LZMA_Alone format. It is a legacy file
+ format, which is being or has been replaced by the .xz format.
+ The MIME type of the .lzma format is `application/x-lzma'.
+
+ The most commonly used software to handle .lzma files are
+ LZMA SDK, LZMA Utils, 7-Zip, and XZ Utils. This document
+ describes some of the differences between these implementations
+ and gives hints what subset of the .lzma format is the most
+ portable.
+
+
+0.1. Notices and Acknowledgements
+
+ This file format was designed by Igor Pavlov for use in
+ LZMA SDK. This document was written by Lasse Collin
+ <lasse.collin@tukaani.org> using the documentation found
+ from the LZMA SDK.
+
+ This document has been put into the public domain.
+
+
+0.2. Changes
+
+ Last modified: 2009-05-01 11:15+0300
+
+
+1. File Format
+
+ +-+-+-+-+-+-+-+-+-+-+-+-+-+==========================+
+ | Header | LZMA Compressed Data |
+ +-+-+-+-+-+-+-+-+-+-+-+-+-+==========================+
+
+ The .lzma format file consist of 13-byte Header followed by
+ the LZMA Compressed Data.
+
+ Unlike the .gz, .bz2, and .xz formats, it is not possible to
+ concatenate multiple .lzma files as is and expect the
+ decompression tool to decode the resulting file as if it were
+ a single .lzma file.
+
+ For example, the command line tools from LZMA Utils and
+ LZMA SDK silently ignore all the data after the first .lzma
+ stream. In contrast, the command line tool from XZ Utils
+ considers the .lzma file to be corrupt if there is data after
+ the first .lzma stream.
+
+
+1.1. Header
+
+ +------------+----+----+----+----+--+--+--+--+--+--+--+--+
+ | Properties | Dictionary Size | Uncompressed Size |
+ +------------+----+----+----+----+--+--+--+--+--+--+--+--+
+
+
+1.1.1. Properties
+
+ The Properties field contains three properties. An abbreviation
+ is given in parentheses, followed by the value range of the
+ property. The field consists of
+
+ 1) the number of literal context bits (lc, [0, 8]);
+ 2) the number of literal position bits (lp, [0, 4]); and
+ 3) the number of position bits (pb, [0, 4]).
+
+ The properties are encoded using the following formula:
+
+ Properties = (pb * 5 + lp) * 9 + lc
+
+ The following C code illustrates a straightforward way to
+ decode the Properties field:
+
+ uint8_t lc, lp, pb;
+ uint8_t prop = get_lzma_properties();
+ if (prop > (4 * 5 + 4) * 9 + 8)
+ return LZMA_PROPERTIES_ERROR;
+
+ pb = prop / (9 * 5);
+ prop -= pb * 9 * 5;
+ lp = prop / 9;
+ lc = prop - lp * 9;
+
+ XZ Utils has an additional requirement: lc + lp <= 4. Files
+ which don't follow this requirement cannot be decompressed
+ with XZ Utils. Usually this isn't a problem since the most
+ common lc/lp/pb values are 3/0/2. It is the only lc/lp/pb
+ combination that the files created by LZMA Utils can have,
+ but LZMA Utils can decompress files with any lc/lp/pb.
+
+
+1.1.2. Dictionary Size
+
+ Dictionary Size is stored as an unsigned 32-bit little endian
+ integer. Any 32-bit value is possible, but for maximum
+ portability, only sizes of 2^n and 2^n + 2^(n-1) should be
+ used.
+
+ LZMA Utils creates only files with dictionary size 2^n,
+ 16 <= n <= 25. LZMA Utils can decompress files with any
+ dictionary size.
+
+ XZ Utils creates and decompresses .lzma files only with
+ dictionary sizes 2^n and 2^n + 2^(n-1). If some other
+ dictionary size is specified when compressing, the value
+ stored in the Dictionary Size field is a rounded up, but the
+ specified value is still used in the actual compression code.
+
+
+1.1.3. Uncompressed Size
+
+ Uncompressed Size is stored as unsigned 64-bit little endian
+ integer. A special value of 0xFFFF_FFFF_FFFF_FFFF indicates
+ that Uncompressed Size is unknown. End of Payload Marker (*)
+ is used if and only if Uncompressed Size is unknown.
+
+ XZ Utils rejects files whose Uncompressed Size field specifies
+ a known size that is 256 GiB or more. This is to reject false
+ positives when trying to guess if the input file is in the
+ .lzma format. When Uncompressed Size is unknown, there is no
+ limit for the uncompressed size of the file.
+
+ (*) Some tools use the term End of Stream (EOS) marker
+ instead of End of Payload Marker.
+
+
+1.2. LZMA Compressed Data
+
+ Detailed description of the format of this field is out of
+ scope of this document.
+
+
+2. References
+
+ LZMA SDK - The original LZMA implementation
+ http://7-zip.org/sdk.html
+
+ 7-Zip
+ http://7-zip.org/
+
+ LZMA Utils - LZMA adapted to POSIX-like systems
+ http://tukaani.org/lzma/
+
+ XZ Utils - The next generation of LZMA Utils
+ http://tukaani.org/xz/
+
+ The .xz file format - The successor of the the .lzma format
+ http://tukaani.org/xz/xz-file-format.txt
+
diff --git a/Build/source/utils/xz-4.999.9beta/doc/man/pdf-a4/xz-a4.pdf b/Build/source/utils/xz-4.999.9beta/doc/man/pdf-a4/xz-a4.pdf
new file mode 100644
index 00000000000..0b6805432e5
--- /dev/null
+++ b/Build/source/utils/xz-4.999.9beta/doc/man/pdf-a4/xz-a4.pdf
Binary files differ
diff --git a/Build/source/utils/xz-4.999.9beta/doc/man/pdf-a4/xzdec-a4.pdf b/Build/source/utils/xz-4.999.9beta/doc/man/pdf-a4/xzdec-a4.pdf
new file mode 100644
index 00000000000..92e52eec78e
--- /dev/null
+++ b/Build/source/utils/xz-4.999.9beta/doc/man/pdf-a4/xzdec-a4.pdf
Binary files differ
diff --git a/Build/source/utils/xz-4.999.9beta/doc/man/pdf-a4/xzdiff-a4.pdf b/Build/source/utils/xz-4.999.9beta/doc/man/pdf-a4/xzdiff-a4.pdf
new file mode 100644
index 00000000000..80aad7a9df2
--- /dev/null
+++ b/Build/source/utils/xz-4.999.9beta/doc/man/pdf-a4/xzdiff-a4.pdf
Binary files differ
diff --git a/Build/source/utils/xz-4.999.9beta/doc/man/pdf-a4/xzgrep-a4.pdf b/Build/source/utils/xz-4.999.9beta/doc/man/pdf-a4/xzgrep-a4.pdf
new file mode 100644
index 00000000000..2c928946d92
--- /dev/null
+++ b/Build/source/utils/xz-4.999.9beta/doc/man/pdf-a4/xzgrep-a4.pdf
Binary files differ
diff --git a/Build/source/utils/xz-4.999.9beta/doc/man/pdf-a4/xzless-a4.pdf b/Build/source/utils/xz-4.999.9beta/doc/man/pdf-a4/xzless-a4.pdf
new file mode 100644
index 00000000000..a6374692f4d
--- /dev/null
+++ b/Build/source/utils/xz-4.999.9beta/doc/man/pdf-a4/xzless-a4.pdf
Binary files differ
diff --git a/Build/source/utils/xz-4.999.9beta/doc/man/pdf-a4/xzmore-a4.pdf b/Build/source/utils/xz-4.999.9beta/doc/man/pdf-a4/xzmore-a4.pdf
new file mode 100644
index 00000000000..b36a5fdfe6d
--- /dev/null
+++ b/Build/source/utils/xz-4.999.9beta/doc/man/pdf-a4/xzmore-a4.pdf
Binary files differ
diff --git a/Build/source/utils/xz-4.999.9beta/doc/man/pdf-letter/xz-letter.pdf b/Build/source/utils/xz-4.999.9beta/doc/man/pdf-letter/xz-letter.pdf
new file mode 100644
index 00000000000..6df9ab66aff
--- /dev/null
+++ b/Build/source/utils/xz-4.999.9beta/doc/man/pdf-letter/xz-letter.pdf
Binary files differ
diff --git a/Build/source/utils/xz-4.999.9beta/doc/man/pdf-letter/xzdec-letter.pdf b/Build/source/utils/xz-4.999.9beta/doc/man/pdf-letter/xzdec-letter.pdf
new file mode 100644
index 00000000000..f056c2ee348
--- /dev/null
+++ b/Build/source/utils/xz-4.999.9beta/doc/man/pdf-letter/xzdec-letter.pdf
Binary files differ
diff --git a/Build/source/utils/xz-4.999.9beta/doc/man/pdf-letter/xzdiff-letter.pdf b/Build/source/utils/xz-4.999.9beta/doc/man/pdf-letter/xzdiff-letter.pdf
new file mode 100644
index 00000000000..39bc0f0a287
--- /dev/null
+++ b/Build/source/utils/xz-4.999.9beta/doc/man/pdf-letter/xzdiff-letter.pdf
Binary files differ
diff --git a/Build/source/utils/xz-4.999.9beta/doc/man/pdf-letter/xzgrep-letter.pdf b/Build/source/utils/xz-4.999.9beta/doc/man/pdf-letter/xzgrep-letter.pdf
new file mode 100644
index 00000000000..677186a1b44
--- /dev/null
+++ b/Build/source/utils/xz-4.999.9beta/doc/man/pdf-letter/xzgrep-letter.pdf
Binary files differ
diff --git a/Build/source/utils/xz-4.999.9beta/doc/man/pdf-letter/xzless-letter.pdf b/Build/source/utils/xz-4.999.9beta/doc/man/pdf-letter/xzless-letter.pdf
new file mode 100644
index 00000000000..dcbd4871228
--- /dev/null
+++ b/Build/source/utils/xz-4.999.9beta/doc/man/pdf-letter/xzless-letter.pdf
Binary files differ
diff --git a/Build/source/utils/xz-4.999.9beta/doc/man/pdf-letter/xzmore-letter.pdf b/Build/source/utils/xz-4.999.9beta/doc/man/pdf-letter/xzmore-letter.pdf
new file mode 100644
index 00000000000..e22857d6894
--- /dev/null
+++ b/Build/source/utils/xz-4.999.9beta/doc/man/pdf-letter/xzmore-letter.pdf
Binary files differ
diff --git a/Build/source/utils/xz-4.999.9beta/doc/man/txt/xz.txt b/Build/source/utils/xz-4.999.9beta/doc/man/txt/xz.txt
new file mode 100644
index 00000000000..e3dacde4a11
--- /dev/null
+++ b/Build/source/utils/xz-4.999.9beta/doc/man/txt/xz.txt
@@ -0,0 +1,786 @@
+XZ(1) XZ Utils XZ(1)
+
+
+
+NAME
+ xz, unxz, xzcat, lzma, unlzma, lzcat - Compress or decompress .xz and
+ .lzma files
+
+SYNOPSIS
+ xz [option]... [file]...
+
+ unxz is equivalent to xz --decompress.
+ xzcat is equivalent to xz --decompress --stdout.
+ lzma is equivalent to xz --format=lzma.
+ unlzma is equivalent to xz --format=lzma --decompress.
+ lzcat is equivalent to xz --format=lzma --decompress --stdout.
+
+ When writing scripts that need to decompress files, it is recommended
+ to always use the name xz with appropriate arguments (xz -d or xz -dc)
+ instead of the names unxz and xzcat.
+
+DESCRIPTION
+ xz is a general-purpose data compression tool with command line syntax
+ similar to gzip(1) and bzip2(1). The native file format is the .xz
+ format, but also the legacy .lzma format and raw compressed streams
+ with no container format headers are supported.
+
+ xz compresses or decompresses each file according to the selected oper-
+ ation mode. If no files are given or file is -, xz reads from standard
+ input and writes the processed data to standard output. xz will refuse
+ (display an error and skip the file) to write compressed data to stan-
+ dard output if it is a terminal. Similarly, xz will refuse to read com-
+ pressed data from standard input if it is a terminal.
+
+ Unless --stdout is specified, files other than - are written to a new
+ file whose name is derived from the source file name:
+
+ o When compressing, the suffix of the target file format (.xz or
+ .lzma) is appended to the source filename to get the target file-
+ name.
+
+ o When decompressing, the .xz or .lzma suffix is removed from the
+ filename to get the target filename. xz also recognizes the suf-
+ fixes .txz and .tlz, and replaces them with the .tar suffix.
+
+ If the target file already exists, an error is displayed and the file
+ is skipped.
+
+ Unless writing to standard output, xz will display a warning and skip
+ the file if any of the following applies:
+
+ o File is not a regular file. Symbolic links are not followed, thus
+ they are never considered to be regular files.
+
+ o File has more than one hardlink.
+
+ o File has setuid, setgid, or sticky bit set.
+
+ o The operation mode is set to compress, and the file already has a
+ suffix of the target file format (.xz or .txz when compressing to
+ the .xz format, and .lzma or .tlz when compressing to the .lzma for-
+ mat).
+
+ o The operation mode is set to decompress, and the file doesn't have a
+ suffix of any of the supported file formats (.xz, .txz, .lzma, or
+ .tlz).
+
+ After successfully compressing or decompressing the file, xz copies the
+ owner, group, permissions, access time, and modification time from the
+ source file to the target file. If copying the group fails, the permis-
+ sions are modified so that the target file doesn't become accessible to
+ users who didn't have permission to access the source file. xz doesn't
+ support copying other metadata like access control lists or extended
+ attributes yet.
+
+ Once the target file has been successfully closed, the source file is
+ removed unless --keep was specified. The source file is never removed
+ if the output is written to standard output.
+
+ Sending SIGINFO or SIGUSR1 to the xz process makes it print progress
+ information to standard error. This has only limited use since when
+ standard error is a terminal, using --verbose will display an automati-
+ cally updating progress indicator.
+
+ Memory usage
+ The memory usage of xz varies from a few hundred kilobytes to several
+ gigabytes depending on the compression settings. The settings used when
+ compressing a file affect also the memory usage of the decompressor.
+ Typically the decompressor needs only 5 % to 20 % of the amount of RAM
+ that the compressor needed when creating the file. Still, the worst-
+ case memory usage of the decompressor is several gigabytes.
+
+ To prevent uncomfortable surprises caused by huge memory usage, xz has
+ a built-in memory usage limiter. The default limit is 40 % of total
+ physical RAM. While operating systems provide ways to limit the memory
+ usage of processes, relying on it wasn't deemed to be flexible enough.
+
+ When compressing, if the selected compression settings exceed the mem-
+ ory usage limit, the settings are automatically adjusted downwards and
+ a notice about this is displayed. As an exception, if the memory usage
+ limit is exceeded when compressing with --format=raw, an error is dis-
+ played and xz will exit with exit status 1.
+
+ If source file cannot be decompressed without exceeding the memory
+ usage limit, an error message is displayed and the file is skipped.
+ Note that compressed files may contain many blocks, which may have been
+ compressed with different settings. Typically all blocks will have
+ roughly the same memory requirements, but it is possible that a block
+ later in the file will exceed the memory usage limit, and an error
+ about too low memory usage limit gets displayed after some data has
+ already been decompressed.
+
+ The absolute value of the active memory usage limit can be seen near
+ the bottom of the output of --long-help. The default limit can be
+ overriden with --memory=limit.
+
+OPTIONS
+ Integer suffixes and special values
+ In most places where an integer argument is expected, an optional suf-
+ fix is supported to easily indicate large integers. There must be no
+ space between the integer and the suffix.
+
+ k or kB
+ The integer is multiplied by 1,000 (10^3). For example, 5k or
+ 5kB equals 5000.
+
+ Ki or KiB
+ The integer is multiplied by 1,024 (2^10).
+
+ M or MB
+ The integer is multiplied by 1,000,000 (10^6).
+
+ Mi or MiB
+ The integer is multiplied by 1,048,576 (2^20).
+
+ G or GB
+ The integer is multiplied by 1,000,000,000 (10^9).
+
+ Gi or GiB
+ The integer is multiplied by 1,073,741,824 (2^30).
+
+ A special value max can be used to indicate the maximum integer value
+ supported by the option.
+
+ Operation mode
+ If multiple operation mode options are given, the last one takes
+ effect.
+
+ -z, --compress
+ Compress. This is the default operation mode when no operation
+ mode option is specified, and no other operation mode is implied
+ from the command name (for example, unxz implies --decompress).
+
+ -d, --decompress, --uncompress
+ Decompress.
+
+ -t, --test
+ Test the integrity of compressed files. No files are created or
+ removed. This option is equivalent to --decompress --stdout
+ except that the decompressed data is discarded instead of being
+ written to standard output.
+
+ -l, --list
+ View information about the compressed files. No uncompressed
+ output is produced, and no files are created or removed. In list
+ mode, the program cannot read the compressed data from standard
+ input or from other unseekable sources.
+
+ This feature has not been implemented yet.
+
+ Operation modifiers
+ -k, --keep
+ Keep (don't delete) the input files.
+
+ -f, --force
+ This option has several effects:
+
+ o If the target file already exists, delete it before compress-
+ ing or decompressing.
+
+ o Compress or decompress even if the input is not a regular
+ file, has more than one hardlink, or has setuid, setgid, or
+ sticky bit set. The setuid, setgid, and sticky bits are not
+ copied to the target file.
+
+ o If combined with --decompress --stdout and xz doesn't recog-
+ nize the type of the source file, xz will copy the source
+ file as is to standard output. This allows using xzcat
+ --force like cat(1) for files that have not been compressed
+ with xz. Note that in future, xz might support new com-
+ pressed file formats, which may make xz decompress more types
+ of files instead of copying them as is to standard output.
+ --format=format can be used to restrict xz to decompress only
+ a single file format.
+
+ o Allow writing compressed data to a terminal, and reading com-
+ pressed data from a terminal.
+
+ -c, --stdout, --to-stdout
+ Write the compressed or decompressed data to standard output
+ instead of a file. This implies --keep.
+
+ -S .suf, --suffix=.suf
+ When compressing, use .suf as the suffix for the target file
+ instead of .xz or .lzma. If not writing to standard output and
+ the source file already has the suffix .suf, a warning is dis-
+ played and the file is skipped.
+
+ When decompressing, recognize also files with the suffix .suf in
+ addition to files with the .xz, .txz, .lzma, or .tlz suffix. If
+ the source file has the suffix .suf, the suffix is removed to
+ get the target filename.
+
+ When compressing or decompressing raw streams (--format=raw),
+ the suffix must always be specified unless writing to standard
+ output, because there is no default suffix for raw streams.
+
+ --files[=file]
+ Read the filenames to process from file; if file is omitted,
+ filenames are read from standard input. Filenames must be termi-
+ nated with the newline character. If filenames are given also as
+ command line arguments, they are processed before the filenames
+ read from file.
+
+ --files0[=file]
+ This is identical to --files[=file] except that the filenames
+ must be terminated with the null character.
+
+ Basic file format and compression options
+ -F format, --format=format
+ Specify the file format to compress or decompress:
+
+ o auto: This is the default. When compressing, auto is equiva-
+ lent to xz. When decompressing, the format of the input file
+ is autodetected. Note that raw streams (created with --for-
+ mat=raw) cannot be autodetected.
+
+ o xz: Compress to the .xz file format, or accept only .xz files
+ when decompressing.
+
+ o lzma or alone: Compress to the legacy .lzma file format, or
+ accept only .lzma files when decompressing. The alternative
+ name alone is provided for backwards compatibility with LZMA
+ Utils.
+
+ o raw: Compress or uncompress a raw stream (no headers). This
+ is meant for advanced users only. To decode raw streams, you
+ need to set not only --format=raw but also specify the filter
+ chain, which would normally be stored in the container format
+ headers.
+
+ -C check, --check=check
+ Specify the type of the integrity check, which is calculated
+ from the uncompressed data. This option has an effect only when
+ compressing into the .xz format; the .lzma format doesn't sup-
+ port integrity checks. The integrity check (if any) is verified
+ when the .xz file is decompressed.
+
+ Supported check types:
+
+ o none: Don't calculate an integrity check at all. This is usu-
+ ally a bad idea. This can be useful when integrity of the
+ data is verified by other means anyway.
+
+ o crc32: Calculate CRC32 using the polynomial from IEEE-802.3
+ (Ethernet).
+
+ o crc64: Calculate CRC64 using the polynomial from ECMA-182.
+ This is the default, since it is slightly better than CRC32
+ at detecting damaged files and the speed difference is negli-
+ gible.
+
+ o sha256: Calculate SHA-256. This is somewhat slower than CRC32
+ and CRC64.
+
+ Integrity of the .xz headers is always verified with CRC32. It
+ is not possible to change or disable it.
+
+ -0 ... -9
+ Select compression preset. If a preset level is specified multi-
+ ple times, the last one takes effect.
+
+ The compression preset levels can be categorised roughly into
+ three categories:
+
+ -0 ... -2
+ Fast presets with relatively low memory usage. -1 and -2
+ should give compression speed and ratios comparable to
+ bzip2 -1 and bzip2 -9, respectively. Currently -0 is not
+ very good (not much faster than -1 but much worse com-
+ pression). In future, -0 may be indicate some fast algo-
+ rithm instead of LZMA2.
+
+ -3 ... -5
+ Good compression ratio with low to medium memory usage.
+ These are significantly slower than levels 0-2.
+
+ -6 ... -9
+ Excellent compression with medium to high memory usage.
+ These are also slower than the lower preset levels. The
+ default is -6. Unless you want to maximize the compres-
+ sion ratio, you probably don't want a higher preset level
+ than -7 due to speed and memory usage.
+
+ The exact compression settings (filter chain) used by each pre-
+ set may vary between xz versions. The settings may also vary
+ between files being compressed, if xz determines that modified
+ settings will probably give better compression ratio without
+ significantly affecting compression time or memory usage.
+
+ Because the settings may vary, the memory usage may vary too.
+ The following table lists the maximum memory usage of each pre-
+ set level, which won't be exceeded even in future versions of
+ xz.
+
+ FIXME: The table below is just a rough idea.
+
+ Preset Compression Decompression
+ -0 6 MiB 1 MiB
+ -1 6 MiB 1 MiB
+ -2 10 MiB 1 MiB
+ -3 20 MiB 2 MiB
+ -4 30 MiB 3 MiB
+ -5 60 MiB 6 MiB
+ -6 100 MiB 10 MiB
+ -7 200 MiB 20 MiB
+ -8 400 MiB 40 MiB
+ -9 800 MiB 80 MiB
+
+ When compressing, xz automatically adjusts the compression set-
+ tings downwards if the memory usage limit would be exceeded, so
+ it is safe to specify a high preset level even on systems that
+ don't have lots of RAM.
+
+ --fast and --best
+ These are somewhat misleading aliases for -0 and -9, respec-
+ tively. These are provided only for backwards compatibility
+ with LZMA Utils. Avoid using these options.
+
+ Especially the name of --best is misleading, because the defini-
+ tion of best depends on the input data, and that usually people
+ don't want the very best compression ratio anyway, because it
+ would be very slow.
+
+ -e, --extreme
+ Modify the compression preset (-0 ... -9) so that a little bit
+ better compression ratio can be achieved without increasing mem-
+ ory usage of the compressor or decompressor (exception: compres-
+ sor memory usage may increase a little with presets -0 ... -2).
+ The downside is that the compression time will increase dramati-
+ cally (it can easily double).
+
+ -M limit, --memory=limit
+ Set the memory usage limit. If this option is specied multiple
+ times, the last one takes effect. The limit can be specified in
+ multiple ways:
+
+ o The limit can be an absolute value in bytes. Using an integer
+ suffix like MiB can be useful. Example: --memory=80MiB
+
+ o The limit can be specified as a percentage of physical RAM.
+ Example: --memory=70%
+
+ o The limit can be reset back to its default value (currently
+ 40 % of physical RAM) by setting it to 0.
+
+ o The memory usage limiting can be effectively disabled by set-
+ ting limit to max. This isn't recommended. It's usually bet-
+ ter to use, for example, --memory=90%.
+
+ The current limit can be seen near the bottom of the output of
+ the --long-help option.
+
+ -T threads, --threads=threads
+ Specify the maximum number of worker threads to use. The default
+ is the number of available CPU cores. You can see the current
+ value of threads near the end of the output of the --long-help
+ option.
+
+ The actual number of worker threads can be less than threads if
+ using more threads would exceed the memory usage limit. In
+ addition to CPU-intensive worker threads, xz may use a few aux-
+ iliary threads, which don't use a lot of CPU time.
+
+ Multithreaded compression and decompression are not implemented
+ yet, so this option has no effect for now.
+
+ Custom compressor filter chains
+ A custom filter chain allows specifying the compression settings in
+ detail instead of relying on the settings associated to the preset lev-
+ els. When a custom filter chain is specified, the compression preset
+ level options (-0 ... -9 and --extreme) are silently ignored.
+
+ A filter chain is comparable to piping on the UN*X command line. When
+ compressing, the uncompressed input goes to the first filter, whose
+ output goes to the next filter (if any). The output of the last filter
+ gets written to the compressed file. The maximum number of filters in
+ the chain is four, but typically a filter chain has only one or two
+ filters.
+
+ Many filters have limitations where they can be in the filter chain:
+ some filters can work only as the last filter in the chain, some only
+ as a non-last filter, and some work in any position in the chain.
+ Depending on the filter, this limitation is either inherent to the fil-
+ ter design or exists to prevent security issues.
+
+ A custom filter chain is specified by using one or more filter options
+ in the order they are wanted in the filter chain. That is, the order of
+ filter options is significant! When decoding raw streams (--for-
+ mat=raw), the filter chain is specified in the same order as it was
+ specified when compressing.
+
+ Filters take filter-specific options as a comma-separated list. Extra
+ commas in options are ignored. Every option has a default value, so you
+ need to specify only those you want to change.
+
+ --lzma1[=options], --lzma2[=options]
+ Add LZMA1 or LZMA2 filter to the filter chain. These filter can
+ be used only as the last filter in the chain.
+
+ LZMA1 is a legacy filter, which is supported almost solely due
+ to the legacy .lzma file format, which supports only LZMA1.
+ LZMA2 is an updated version of LZMA1 to fix some practical
+ issues of LZMA1. The .xz format uses LZMA2, and doesn't support
+ LZMA1 at all. Compression speed and ratios of LZMA1 and LZMA2
+ are practically the same.
+
+ LZMA1 and LZMA2 share the same set of options:
+
+ preset=preset
+ Reset all LZMA1 or LZMA2 options to preset. Preset con-
+ sist of an integer, which may be followed by single-let-
+ ter preset modifiers. The integer can be from 0 to 9,
+ matching the command line options -0 ... -9. The only
+ supported modifier is currently e, which matches
+ --extreme.
+
+ The default preset is 6, from which the default values
+ for the rest of the LZMA1 or LZMA2 options are taken.
+
+ dict=size
+ Dictionary (history buffer) size indicates how many bytes
+ of the recently processed uncompressed data is kept in
+ memory. One method to reduce size of the uncompressed
+ data is to store distance-length pairs, which indicate
+ what data to repeat from the dictionary buffer. The big-
+ ger the dictionary, the better the compression ratio usu-
+ ally is, but dictionaries bigger than the uncompressed
+ data are waste of RAM.
+
+ Typical dictionary size is from 64 KiB to 64 MiB. The
+ minimum is 4 KiB. The maximum for compression is cur-
+ rently 1.5 GiB. The decompressor already supports dictio-
+ naries up to one byte less than 4 GiB, which is the maxi-
+ mum for LZMA1 and LZMA2 stream formats.
+
+ Dictionary size has the biggest effect on compression
+ ratio. Dictionary size and match finder together deter-
+ mine the memory usage of the LZMA1 or LZMA2 encoder. The
+ same dictionary size is required for decompressing that
+ was used when compressing, thus the memory usage of the
+ decoder is determined by the dictionary size used when
+ compressing.
+
+ lc=lc Specify the number of literal context bits. The minimum
+ is 0 and the maximum is 4; the default is 3. In addi-
+ tion, the sum of lc and lp must not exceed 4.
+
+ lp=lp Specify the number of literal position bits. The minimum
+ is 0 and the maximum is 4; the default is 0.
+
+ pb=pb Specify the number of position bits. The minimum is 0 and
+ the maximum is 4; the default is 2.
+
+ mode=mode
+ Compression mode specifies the function used to analyze
+ the data produced by the match finder. Supported modes
+ are fast and normal. The default is fast for presets 0-2
+ and normal for presets 3-9.
+
+ mf=mf Match finder has a major effect on encoder speed, memory
+ usage, and compression ratio. Usually Hash Chain match
+ finders are faster than Binary Tree match finders. Hash
+ Chains are usually used together with mode=fast and
+ Binary Trees with mode=normal. The memory usage formulas
+ are only rough estimates, which are closest to reality
+ when dict is a power of two.
+
+ hc3 Hash Chain with 2- and 3-byte hashing
+ Minimum value for nice: 3
+ Memory usage: dict * 7.5 (if dict <= 16 MiB);
+ dict * 5.5 + 64 MiB (if dict > 16 MiB)
+
+ hc4 Hash Chain with 2-, 3-, and 4-byte hashing
+ Minimum value for nice: 4
+ Memory usage: dict * 7.5
+
+ bt2 Binary Tree with 2-byte hashing
+ Minimum value for nice: 2
+ Memory usage: dict * 9.5
+
+ bt3 Binary Tree with 2- and 3-byte hashing
+ Minimum value for nice: 3
+ Memory usage: dict * 11.5 (if dict <= 16 MiB);
+ dict * 9.5 + 64 MiB (if dict > 16 MiB)
+
+ bt4 Binary Tree with 2-, 3-, and 4-byte hashing
+ Minimum value for nice: 4
+ Memory usage: dict * 11.5
+
+ nice=nice
+ Specify what is considered to be a nice length for a
+ match. Once a match of at least nice bytes is found, the
+ algorithm stops looking for possibly better matches.
+
+ nice can be 2-273 bytes. Higher values tend to give bet-
+ ter compression ratio at expense of speed. The default
+ depends on the preset level.
+
+ depth=depth
+ Specify the maximum search depth in the match finder. The
+ default is the special value 0, which makes the compres-
+ sor determine a reasonable depth from mf and nice.
+
+ Using very high values for depth can make the encoder
+ extremely slow with carefully crafted files. Avoid set-
+ ting the depth over 1000 unless you are prepared to
+ interrupt the compression in case it is taking too long.
+
+ When decoding raw streams (--format=raw), LZMA2 needs only the
+ value of dict. LZMA1 needs also lc, lp, and pb.
+
+ --x86[=options]
+
+ --powerpc[=options]
+
+ --ia64[=options]
+
+ --arm[=options]
+
+ --armthumb[=options]
+
+ --sparc[=options]
+ Add a branch/call/jump (BCJ) filter to the filter chain. These
+ filters can be used only as non-last filter in the filter chain.
+
+ A BCJ filter converts relative addresses in the machine code to
+ their absolute counterparts. This doesn't change the size of the
+ data, but it increases redundancy, which allows e.g. LZMA2 to
+ get better compression ratio.
+
+ The BCJ filters are always reversible, so using a BCJ filter for
+ wrong type of data doesn't cause any data loss. However, apply-
+ ing a BCJ filter for wrong type of data is a bad idea, because
+ it tends to make the compression ratio worse.
+
+ Different instruction sets have have different alignment:
+
+ Filter Alignment Notes
+ x86 1 32-bit and 64-bit x86
+ PowerPC 4 Big endian only
+ ARM 4 Little endian only
+ ARM-Thumb 2 Little endian only
+ IA-64 16 Big or little endian
+ SPARC 4 Big or little endian
+
+ Since the BCJ-filtered data is usually compressed with LZMA2,
+ the compression ratio may be improved slightly if the LZMA2
+ options are set to match the alignment of the selected BCJ fil-
+ ter. For example, with the IA-64 filter, it's good to set pb=4
+ with LZMA2 (2^4=16). The x86 filter is an exception; it's usu-
+ ally good to stick to LZMA2's default four-byte alignment when
+ compressing x86 executables.
+
+ All BCJ filters support the same options:
+
+ start=offset
+ Specify the start offset that is used when converting
+ between relative and absolute addresses. The offset must
+ be a multiple of the alignment of the filter (see the ta-
+ ble above). The default is zero. In practice, the
+ default is good; specifying a custom offset is almost
+ never useful.
+
+ Specifying a non-zero start offset is probably useful
+ only if the executable has multiple sections, and there
+ are many cross-section jumps or calls. Applying a BCJ
+ filter separately for each section with proper start off-
+ set and then compressing the result as a single chunk may
+ give some improvement in compression ratio compared to
+ applying the BCJ filter with the default offset for the
+ whole executable.
+
+ --delta[=options]
+ Add Delta filter to the filter chain. The Delta filter can be
+ used only as non-last filter in the filter chain.
+
+ Currently only simple byte-wise delta calculation is supported.
+ It can be useful when compressing e.g. uncompressed bitmap
+ images or uncompressed PCM audio. However, special purpose algo-
+ rithms may give significantly better results than Delta + LZMA2.
+ This is true especially with audio, which compresses faster and
+ better e.g. with FLAC.
+
+ Supported options:
+
+ dist=distance
+ Specify the distance of the delta calculation as bytes.
+ distance must be 1-256. The default is 1.
+
+ For example, with dist=2 and eight-byte input A1 B1 A2 B3
+ A3 B5 A4 B7, the output will be A1 B1 01 02 01 02 01 02.
+
+ Other options
+ -q, --quiet
+ Suppress warnings and notices. Specify this twice to suppress
+ errors too. This option has no effect on the exit status. That
+ is, even if a warning was suppressed, the exit status to indi-
+ cate a warning is still used.
+
+ -v, --verbose
+ Be verbose. If standard error is connected to a terminal, xz
+ will display a progress indicator. Specifying --verbose twice
+ will give even more verbose output (useful mostly for debug-
+ ging).
+
+ -Q, --no-warn
+ Don't set the exit status to 2 even if a condition worth a warn-
+ ing was detected. This option doesn't affect the verbosity
+ level, thus both --quiet and --no-warn have to be used to not
+ display warnings and to not alter the exit status.
+
+ -h, --help
+ Display a help message describing the most commonly used
+ options, and exit successfully.
+
+ -H, --long-help
+ Display a help message describing all features of xz, and exit
+ successfully
+
+ -V, --version
+ Display the version number of xz and liblzma.
+
+EXIT STATUS
+ 0 All is good.
+
+ 1 An error occurred.
+
+ 2 Something worth a warning occurred, but no actual errors
+ occurred.
+
+ Notices (not warnings or errors) printed on standard error don't affect
+ the exit status.
+
+ENVIRONMENT
+ XZ_OPT A space-separated list of options is parsed from XZ_OPT before
+ parsing the options given on the command line. Note that only
+ options are parsed from XZ_OPT; all non-options are silently
+ ignored. Parsing is done with getopt_long(3) which is used also
+ for the command line arguments.
+
+LZMA UTILS COMPATIBILITY
+ The command line syntax of xz is practically a superset of lzma,
+ unlzma, and lzcat as found from LZMA Utils 4.32.x. In most cases, it is
+ possible to replace LZMA Utils with XZ Utils without breaking existing
+ scripts. There are some incompatibilities though, which may sometimes
+ cause problems.
+
+ Compression preset levels
+ The numbering of the compression level presets is not identical in xz
+ and LZMA Utils. The most important difference is how dictionary sizes
+ are mapped to different presets. Dictionary size is roughly equal to
+ the decompressor memory usage.
+
+ Level xz LZMA Utils
+ -1 64 KiB 64 KiB
+ -2 512 KiB 1 MiB
+ -3 1 MiB 512 KiB
+ -4 2 MiB 1 MiB
+ -5 4 MiB 2 MiB
+ -6 8 MiB 4 MiB
+ -7 16 MiB 8 MiB
+ -8 32 MiB 16 MiB
+ -9 64 MiB 32 MiB
+
+ The dictionary size differences affect the compressor memory usage too,
+ but there are some other differences between LZMA Utils and XZ Utils,
+ which make the difference even bigger:
+
+ Level xz LZMA Utils 4.32.x
+ -1 2 MiB 2 MiB
+ -2 5 MiB 12 MiB
+ -3 13 MiB 12 MiB
+ -4 25 MiB 16 MiB
+ -5 48 MiB 26 MiB
+ -6 94 MiB 45 MiB
+ -7 186 MiB 83 MiB
+ -8 370 MiB 159 MiB
+ -9 674 MiB 311 MiB
+
+ The default preset level in LZMA Utils is -7 while in XZ Utils it is
+ -6, so both use 8 MiB dictionary by default.
+
+ Streamed vs. non-streamed .lzma files
+ Uncompressed size of the file can be stored in the .lzma header. LZMA
+ Utils does that when compressing regular files. The alternative is to
+ mark that uncompressed size is unknown and use end of payload marker to
+ indicate where the decompressor should stop. LZMA Utils uses this
+ method when uncompressed size isn't known, which is the case for exam-
+ ple in pipes.
+
+ xz supports decompressing .lzma files with or without end of payload
+ marker, but all .lzma files created by xz will use end of payload
+ marker and have uncompressed size marked as unknown in the .lzma
+ header. This may be a problem in some (uncommon) situations. For exam-
+ ple, a .lzma decompressor in an embedded device might work only with
+ files that have known uncompressed size. If you hit this problem, you
+ need to use LZMA Utils or LZMA SDK to create .lzma files with known
+ uncompressed size.
+
+ Unsupported .lzma files
+ The .lzma format allows lc values up to 8, and lp values up to 4. LZMA
+ Utils can decompress files with any lc and lp, but always creates files
+ with lc=3 and lp=0. Creating files with other lc and lp is possible
+ with xz and with LZMA SDK.
+
+ The implementation of the LZMA1 filter in liblzma requires that the sum
+ of lc and lp must not exceed 4. Thus, .lzma files which exceed this
+ limitation, cannot be decompressed with xz.
+
+ LZMA Utils creates only .lzma files which have dictionary size of 2^n
+ (a power of 2), but accepts files with any dictionary size. liblzma
+ accepts only .lzma files which have dictionary size of 2^n or 2^n +
+ 2^(n-1). This is to decrease false positives when autodetecting .lzma
+ files.
+
+ These limitations shouldn't be a problem in practice, since practically
+ all .lzma files have been compressed with settings that liblzma will
+ accept.
+
+ Trailing garbage
+ When decompressing, LZMA Utils silently ignore everything after the
+ first .lzma stream. In most situations, this is a bug. This also means
+ that LZMA Utils don't support decompressing concatenated .lzma files.
+
+ If there is data left after the first .lzma stream, xz considers the
+ file to be corrupt. This may break obscure scripts which have assumed
+ that trailing garbage is ignored.
+
+NOTES
+ Compressed output may vary
+ The exact compressed output produced from the same uncompressed input
+ file may vary between XZ Utils versions even if compression options are
+ identical. This is because the encoder can be improved (faster or bet-
+ ter compression) without affecting the file format. The output can vary
+ even between different builds of the same XZ Utils version, if differ-
+ ent build options are used or if the endianness of the hardware is dif-
+ ferent for different builds.
+
+ The above means that implementing --rsyncable to create rsyncable .xz
+ files is not going to happen without freezing a part of the encoder
+ implementation, which can then be used with --rsyncable.
+
+ Embedded .xz decompressors
+ Embedded .xz decompressor implementations like XZ Embedded don't neces-
+ sarily support files created with check types other than none and
+ crc32. Since the default is --check=crc64, you must use --check=none
+ or --check=crc32 when creating files for embedded systems.
+
+ Outside embedded systems, all .xz format decompressors support all the
+ check types, or at least are able to decompress the file without veri-
+ fying the integrity check if the particular check is not supported.
+
+ XZ Embedded supports BCJ filters, but only with the default start off-
+ set.
+
+SEE ALSO
+ xzdec(1), gzip(1), bzip2(1)
+
+ XZ Utils: <http://tukaani.org/xz/>
+ XZ Embedded: <http://tukaani.org/xz/embedded.html>
+ LZMA SDK: <http://7-zip.org/sdk.html>
+
+
+
+Tukaani 2009-08-27 XZ(1)
diff --git a/Build/source/utils/xz-4.999.9beta/doc/man/txt/xzdec.txt b/Build/source/utils/xz-4.999.9beta/doc/man/txt/xzdec.txt
new file mode 100644
index 00000000000..ee2b820adad
--- /dev/null
+++ b/Build/source/utils/xz-4.999.9beta/doc/man/txt/xzdec.txt
@@ -0,0 +1,95 @@
+XZDEC(1) XZ Utils XZDEC(1)
+
+
+
+NAME
+ xzdec, lzmadec - Small .xz and .lzma decompressors
+
+SYNOPSIS
+ xzdec [option]... [file]...
+ lzmadec [option]... [file]...
+
+DESCRIPTION
+ xzdec is a liblzma-based decompression-only tool for .xz (and only .xz)
+ files. xzdec is intended to work as a drop-in replacement for xz(1) in
+ the most common situations where a script has been written to use xz
+ --decompress --stdout (and possibly a few other commonly used options)
+ to decompress .xz files. lzmadec is identical to xzdec except that
+ lzmadec supports .lzma files instead of .xz files.
+
+ To reduce the size of the executable, xzdec doesn't support multi-
+ threading or localization, and doesn't read options from XZ_OPT envi-
+ ronment variable. xzdec doesn't support displaying intermediate
+ progress information: sending SIGINFO to xzdec does nothing, but send-
+ ing SIGUSR1 terminates the process instead of displaying progress
+ information.
+
+OPTIONS
+ -d, --decompress, --uncompress
+ Ignored for xz(1) compatibility. xzdec supports only decompres-
+ sion.
+
+ -k, --keep
+ Ignored for xz(1) compatibility. xzdec never creates or removes
+ any files.
+
+ -c, --stdout, --to-stdout
+ Ignored for xz(1) compatibility. xzdec always writes the decom-
+ pressed data to standard output.
+
+ -M limit, --memory=limit
+ Set the memory usage limit. If this option is specified multi-
+ ple times, the last one takes effect. The limit can be specified
+ in multiple ways:
+
+ o The limit can be an absolute value in bytes. Using an integer
+ suffix like MiB can be useful. Example: --memory=80MiB
+
+ o The limit can be specified as a percentage of physical RAM.
+ Example: --memory=70%
+
+ o The limit can be reset back to its default value (currently
+ 40 % of physical RAM) by setting it to 0.
+
+ o The memory usage limiting can be effectively disabled by set-
+ ting limit to max. This isn't recommended. It's usually bet-
+ ter to use, for example, --memory=90%.
+
+ The current limit can be seen near the bottom of the output of
+ the --help option.
+
+ -q, --quiet
+ Specifying this once does nothing since xzdec never displays any
+ warnings or notices. Specify this twice to suppress errors.
+
+ -Q, --no-warn
+ Ignored for xz(1) compatibility. xzdec never uses the exit sta-
+ tus 2.
+
+ -h, --help
+ Display a help message and exit successfully.
+
+ -V, --version
+ Display the version number of xzdec and liblzma.
+
+EXIT STATUS
+ 0 All was good.
+
+ 1 An error occurred.
+
+ xzdec doesn't have any warning messages like xz(1) has, thus the exit
+ status 2 is not used by xzdec.
+
+NOTES
+ xzdec and lzmadec are not really that small. The size can be reduced
+ further by dropping features from liblzma at compile time, but that
+ shouldn't usually be done for executables distributed in typical non-
+ embedded operating system distributions. If you need a truly small .xz
+ decompressor, consider using XZ Embedded.
+
+SEE ALSO
+ xz(1)
+
+
+
+Tukaani 2009-06-04 XZDEC(1)
diff --git a/Build/source/utils/xz-4.999.9beta/doc/man/txt/xzdiff.txt b/Build/source/utils/xz-4.999.9beta/doc/man/txt/xzdiff.txt
new file mode 100644
index 00000000000..f64568f2ae3
--- /dev/null
+++ b/Build/source/utils/xz-4.999.9beta/doc/man/txt/xzdiff.txt
@@ -0,0 +1,36 @@
+XZDIFF(1) XZ Utils XZDIFF(1)
+
+
+
+NAME
+ xzcmp, xzdiff, lzcmp, lzdiff - compare compressed files
+
+SYNOPSIS
+ xzcmp [cmp_options] file1 [file2]
+ xzdiff [diff_options] file1 [file2]
+ lzcmp [cmp_options] file1 [file2]
+ lzdiff [diff_options] file1 [file2]
+
+DESCRIPTION
+ xzcmp and xdiff invoke cmp(1) or diff(1) on files compressed with
+ xz(1), lzma(1), gzip(1), or bzip2(1). All options specified are passed
+ directly to cmp or diff. If only one file is specified, then the files
+ compared are file1 (which must have a suffix of a supported compression
+ format) and file1 from which the compression format suffix has been
+ stripped. If two files are specified, then they are uncompressed if
+ necessary and fed to cmp(1) or diff(1). The exit status from cmp or
+ diff is preserved.
+
+ The names lzcmp and lzdiff are provided for backward compatibility with
+ LZMA Utils.
+
+SEE ALSO
+ cmp(1), diff(1), xz(1), gzip(1), bzip2(1), zdiff(1)
+
+BUGS
+ Messages from the cmp(1) or diff(1) programs refer to temporary file-
+ names instead of those specified.
+
+
+
+Tukaani 2009-07-05 XZDIFF(1)
diff --git a/Build/source/utils/xz-4.999.9beta/doc/man/txt/xzgrep.txt b/Build/source/utils/xz-4.999.9beta/doc/man/txt/xzgrep.txt
new file mode 100644
index 00000000000..7f665bce295
--- /dev/null
+++ b/Build/source/utils/xz-4.999.9beta/doc/man/txt/xzgrep.txt
@@ -0,0 +1,39 @@
+XZGREP(1) XZ Utils XZGREP(1)
+
+
+
+NAME
+ xzgrep - search compressed files for a regular expression
+
+SYNOPSIS
+ xzgrep [grep_options] [-e] pattern file...
+ xzegrep ...
+ xzfgrep ...
+ lzgrep ...
+ lzegrep ...
+ lzfgrep ...
+
+DESCRIPTION
+ xzgrep invokes grep(1) on files which may be either uncompressed or
+ compressed with xz(1), lzma(1), gzip(1), or bzip2(1). All options
+ specified are passed directly to grep(1).
+
+ If no file is specified, then the standard input is decompressed if
+ necessary and fed to grep(1). When reading from standard input,
+ gzip(1) and bzip2(1) compressed files are not supported.
+
+ If xzgrep is invoked as xzegrep or xzfgrep then egrep(1) or fgrep(1) is
+ used instead of grep(1). The same applies to names lzgrep, lzegrep,
+ and lzfgrep, which are provided for backward compatibility with LZMA
+ Utils.
+
+ENVIRONMENT
+ GREP If the GREP environment variable is set, xzgrep uses it instead
+ of grep(1), egrep(1), or fgrep(1).
+
+SEE ALSO
+ grep(1), xz(1), gzip(1), bzip2(1), zgrep(1)
+
+
+
+Tukaani 2009-07-05 XZGREP(1)
diff --git a/Build/source/utils/xz-4.999.9beta/doc/man/txt/xzless.txt b/Build/source/utils/xz-4.999.9beta/doc/man/txt/xzless.txt
new file mode 100644
index 00000000000..2f3dc9fe2c4
--- /dev/null
+++ b/Build/source/utils/xz-4.999.9beta/doc/man/txt/xzless.txt
@@ -0,0 +1,40 @@
+XZLESS(1) XZ Utils XZLESS(1)
+
+
+
+NAME
+ xzless, lzless - view xz or lzma compressed (text) files
+
+SYNOPSIS
+ xzless [file...]
+ lzless [file...]
+
+DESCRIPTION
+ xzless is a filter that displays pagefulls of uncompressed text from
+ compressed file(s) to a terminal. It works on files compressed with
+ xz(1) or lzma(1). If no files are given, xzless reads from standard
+ input.
+
+ xzless uses less(1) as its only pager. Unlike xzmore, the choice of
+ pagers is not alterable by an environment variable. Commands are based
+ on both more(1) and vi(1), and allow back and forth movement and
+ searching. See the less(1) manual for more information.
+
+ The command named lzless is provided for backward compatibility with
+ LZMA Utils.
+
+ENVIRONMENT
+ LESSMETACHARS
+ A list of characters special to the shell. Set by xzless unless
+ it is already set in the environment.
+
+ LESSOPEN
+ Set to a command line to invoke the xz(1) decompressor for pre-
+ processing the input files to less(1).
+
+SEE ALSO
+ less(1), xz(1), xzmore(1), zless(1)
+
+
+
+Tukaani 2009-07-05 XZLESS(1)
diff --git a/Build/source/utils/xz-4.999.9beta/doc/man/txt/xzmore.txt b/Build/source/utils/xz-4.999.9beta/doc/man/txt/xzmore.txt
new file mode 100644
index 00000000000..6f6cfe93eea
--- /dev/null
+++ b/Build/source/utils/xz-4.999.9beta/doc/man/txt/xzmore.txt
@@ -0,0 +1,34 @@
+XZMORE(1) XZ Utils XZMORE(1)
+
+
+
+NAME
+ xzmore, lzmore - view xz or lzma compressed (text) files
+
+SYNOPSIS
+ xzmore [filename ...]
+ lzmore [filename ...]
+
+DESCRIPTION
+ xzmore is a filter which allows examination of xz(1) or lzma(1) com-
+ pressed text files one screenful at a time on a soft-copy terminal.
+
+ To use a pager other than the default more, set environment variable
+ PAGER to the name of the desired program. The name lzmore is provided
+ for backward compatibility with LZMA Utils.
+
+ e or q When the prompt --More--(Next file: file) is printed, this com-
+ mand causes xzmore to exit.
+
+ s When the prompt --More--(Next file: file) is printed, this com-
+ mand causes xzmore to skip the next file and continue.
+
+ For list of keyboard commands supported while actually viewing the con-
+ tent of a file, refer to manual of the pager you use, usually more(1).
+
+SEE ALSO
+ more(1), xz(1), xzless(1), zmore(1)
+
+
+
+Tukaani 2009-07-05 XZMORE(1)
diff --git a/Build/source/utils/xz-4.999.8beta/doc/file-format.txt b/Build/source/utils/xz-4.999.9beta/doc/xz-file-format.txt
index fa2b3340370..4ed66506018 100644
--- a/Build/source/utils/xz-4.999.8beta/doc/file-format.txt
+++ b/Build/source/utils/xz-4.999.9beta/doc/xz-file-format.txt
@@ -2,7 +2,7 @@
The .xz File Format
===================
-Version 1.0.0 (2009-01-14)
+Version 1.0.4 (2009-08-27)
0. Preface
@@ -92,7 +92,19 @@ Version 1.0.0 (2009-01-14)
0.3. Version History
Version Date Description
- 1.0.0 2008-01-14 The first official version
+
+ 1.0.4 2009-08-27 Language improvements in Sections 1.2,
+ 2.1.1.2, 3.1.1, 3.1.2, and 5.3.1
+
+ 1.0.3 2009-06-05 Spelling fixes in Sections 5.1 and 5.4
+
+ 1.0.2 2009-06-04 Typo fixes in Sections 4 and 5.3.1
+
+ 1.0.1 2009-06-01 Typo fix in Section 0.3 and minor
+ clarifications to Sections 2, 2.2,
+ 3.3, 4.4, and 5.3.2
+
+ 1.0.0 2009-01-14 The first official version
1. Conventions
@@ -174,7 +186,8 @@ Version 1.0.0 (2009-01-14)
For now, the value of the variable-length integers is limited
to 63 bits, which limits the encoded size of the integer to
- nine bytes. These limits may be increased in future if needed.
+ nine bytes. These limits may be increased in the future if
+ needed.
The following C code illustrates encoding and decoding of
variable-length integers. The functions return the number of
@@ -233,6 +246,10 @@ Version 1.0.0 (2009-01-14)
| Stream | Stream Padding | Stream | Stream Padding | ...
+========+================+========+================+
+ The sizes of Stream and Stream Padding are always multiples
+ of four bytes, thus the size of every valid .xz file MUST be
+ a multiple of four bytes.
+
While a typical file contains only one Stream and no Stream
Padding, a decoder handling standalone .xz files SHOULD support
files that have more than one Stream or Stream Padding.
@@ -306,9 +323,9 @@ Version 1.0.0 (2009-01-14)
2.1.1.2. Stream Flags
- The first byte of Stream Flags is always a null byte. In future
- this byte may be used to indicate new Stream version or other
- Stream properties.
+ The first byte of Stream Flags is always a null byte. In the
+ future, this byte may be used to indicate a new Stream version
+ or other Stream properties.
The second byte of Stream Flags is a bit field:
@@ -431,7 +448,8 @@ Version 1.0.0 (2009-01-14)
Stream Padding MUST contain only null bytes. To preserve the
four-byte alignment of consecutive Streams, the size of Stream
Padding MUST be a multiple of four bytes. Empty Stream Padding
- is allowed.
+ is allowed. If these requirements are not met, the decoder MUST
+ indicate an error.
Note that non-empty Stream Padding is allowed at the end of the
file; there doesn't need to be a new Stream after non-empty
@@ -478,15 +496,15 @@ Version 1.0.0 (2009-01-14)
real_header_size = (encoded_header_size + 1) * 4;
- If bigger Block Header is needed in future, a new field can be
- added between the current Block Header and Compressed Data
- fields. The presence of this new field would be indicated in
- the Block Header.
+ If a Block Header bigger than 1024 bytes is needed in the
+ future, a new field can be added between the Block Header and
+ Compressed Data fields. The presence of this new field would
+ be indicated in the Block Header field.
3.1.2. Block Flags
- The first byte of the Block Flags field is a bit field:
+ The Block Flags field is a bit field:
Bit(s) Mask Description
0-1 0x03 Number of filters (1-4)
@@ -597,7 +615,9 @@ Version 1.0.0 (2009-01-14)
Block Padding MUST contain 0-3 null bytes to make the size of
the Block a multiple of four bytes. This can be needed when
- the size of Compressed Data is not a multiple of four.
+ the size of Compressed Data is not a multiple of four. If any
+ of the bytes in Block Padding are not null bytes, the decoder
+ MUST indicate an error.
3.4. Check
@@ -622,7 +642,7 @@ Version 1.0.0 (2009-01-14)
---> | List of Records | Index Padding | CRC32 |
+=================+===============+-+-+-+-+
- Index serves several purporses. Using it, one can
+ Index serves several purposes. Using it, one can
- verify that all Blocks in a Stream have been processed;
- find out the uncompressed size of a Stream; and
- quickly access the beginning of any Block (random access).
@@ -709,7 +729,8 @@ Version 1.0.0 (2009-01-14)
4.4. Index Padding
This field MUST contain 0-3 null bytes to pad the Index to
- a multiple of four bytes.
+ a multiple of four bytes. If any of the bytes are not null
+ bytes, the decoder MUST indicate an error.
4.5. CRC32
@@ -745,13 +766,13 @@ Version 1.0.0 (2009-01-14)
Some filters, for example LZMA2, can be configured to take
advantage of specified alignment of input data. Note that
- taking advantage of aligned input can be benefical also when
+ taking advantage of aligned input can be beneficial also when
a filter is not the first filter in the chain. For example,
if you compress PowerPC executables, you may want to use the
PowerPC filter and chain that with the LZMA2 filter. Because
not only the input but also the output alignment of the PowerPC
- filter is four bytes, it is now benefical to set LZMA2 settings
- so that the LZMA2 encoder can take advantage of its
+ filter is four bytes, it is now beneficial to set LZMA2
+ settings so that the LZMA2 encoder can take advantage of its
four-byte-aligned input data.
The output of the last filter in the chain is stored to the
@@ -811,12 +832,12 @@ Version 1.0.0 (2009-01-14)
5.3.1. LZMA2
- LZMA (Lempel-Ziv-Markov chain-Algorithm) is a general-purporse
+ LZMA (Lempel-Ziv-Markov chain-Algorithm) is a general-purpose
compression algorithm with high compression ratio and fast
decompression. LZMA is based on LZ77 and range coding
algorithms.
- LZMA2 is an extensions on top of the original LZMA. LZMA2 uses
+ LZMA2 is an extension on top of the original LZMA. LZMA2 uses
LZMA internally, but adds support for flushing the encoder,
uncompressed chunks, eases stateful decoder implementations,
and improves support for multithreading. Thus, the plain LZMA
@@ -901,8 +922,10 @@ Version 1.0.0 (2009-01-14)
If the size of Filter Properties is four bytes, the Filter
Properties field contains the start offset used for address
conversions. It is stored as an unsigned 32-bit little endian
- integer. If the size of Filter Properties is zero, the start
- offset is zero.
+ integer. The start offset MUST be a multiple of the alignment
+ of the filter as listed in the table above; if it isn't, the
+ decoder MUST indicate an error. If the size of Filter
+ Properties is zero, the start offset is zero.
Setting the start offset may be useful if an executable has
multiple sections, and there are many cross-section calls.
@@ -970,7 +993,7 @@ Version 1.0.0 (2009-01-14)
The second choice is to generate a 40-bit random integer,
which the developer can use as his personal Developer ID.
- To minimalize the risk of collisions, Developer ID has to be
+ To minimize the risk of collisions, Developer ID has to be
a randomly generated integer, not manually selected "hex word".
The following command, which works on many free operating
systems, can be used to generate Developer ID:
diff --git a/Build/source/utils/xz-4.999.9beta/dos/Makefile b/Build/source/utils/xz-4.999.9beta/dos/Makefile
new file mode 100644
index 00000000000..0b8a088c183
--- /dev/null
+++ b/Build/source/utils/xz-4.999.9beta/dos/Makefile
@@ -0,0 +1,255 @@
+###############################################################################
+#
+# Makefile to build XZ Utils using DJGPP
+#
+# Make flags to alter compilation:
+#
+# DEBUG=1 Enable assertions. Don't use this for production builds!
+# You may also want to set CFLAGS="-g -O0" to disable
+# optimizations.
+#
+# The usual CPPFLAGS and CFLAGS are supported too.
+#
+###############################################################################
+#
+# Author: Lasse Collin
+#
+# This file has been put into the public domain.
+# You can do whatever you want with this file.
+#
+###############################################################################
+
+CC = gcc
+AR = ar
+STRIP = strip
+SED = sed
+RM = rm -f
+
+CFLAGS = -g -Wextra -Wfatal-errors -Wall -march=i386 -mtune=i686 -O2
+
+# NOTE: -fgnu89-inline is needed on DJGPP 2.04 beta and GCC 4.3.2
+# because time.h uses GNU-style "extern inline".
+ALL_CFLAGS = -std=gnu99 -fgnu89-inline
+
+ALL_CPPFLAGS = \
+ -I. \
+ -I../lib \
+ -I../src/common \
+ -I../src/liblzma/api \
+ -I../src/liblzma/common \
+ -I../src/liblzma/check \
+ -I../src/liblzma/rangecoder \
+ -I../src/liblzma/lz \
+ -I../src/liblzma/lzma \
+ -I../src/liblzma/delta \
+ -I../src/liblzma/simple \
+ -I../src/liblzma/subblock
+
+ALL_CPPFLAGS += -DHAVE_CONFIG_H
+
+ifdef DEBUG
+STRIP := rem Skipping strip
+else
+ALL_CPPFLAGS += -DNDEBUG
+endif
+
+ALL_CPPFLAGS += $(CPPFLAGS)
+ALL_CFLAGS += $(CFLAGS)
+
+
+################
+# Common rules #
+################
+
+.PHONY: all clean
+all: liblzma.a getopt.a xzdec.exe lzmadec.exe xz.exe
+clean: liblzma-clean getopt-clean xzdec-clean xz-clean
+
+
+#############
+# liblzma.a #
+#############
+
+LIBLZMA_SRCS_C = \
+ ../src/liblzma/common/alone_decoder.c \
+ ../src/liblzma/common/alone_encoder.c \
+ ../src/liblzma/common/auto_decoder.c \
+ ../src/liblzma/common/block_buffer_decoder.c \
+ ../src/liblzma/common/block_buffer_encoder.c \
+ ../src/liblzma/common/block_decoder.c \
+ ../src/liblzma/common/block_encoder.c \
+ ../src/liblzma/common/block_header_decoder.c \
+ ../src/liblzma/common/block_header_encoder.c \
+ ../src/liblzma/common/block_util.c \
+ ../src/liblzma/common/common.c \
+ ../src/liblzma/common/easy_buffer_encoder.c \
+ ../src/liblzma/common/easy_decoder_memusage.c \
+ ../src/liblzma/common/easy_encoder.c \
+ ../src/liblzma/common/easy_encoder_memusage.c \
+ ../src/liblzma/common/easy_preset.c \
+ ../src/liblzma/common/filter_common.c \
+ ../src/liblzma/common/filter_decoder.c \
+ ../src/liblzma/common/filter_encoder.c \
+ ../src/liblzma/common/filter_flags_decoder.c \
+ ../src/liblzma/common/filter_flags_encoder.c \
+ ../src/liblzma/common/index.c \
+ ../src/liblzma/common/index_decoder.c \
+ ../src/liblzma/common/index_encoder.c \
+ ../src/liblzma/common/index_hash.c \
+ ../src/liblzma/common/stream_buffer_decoder.c \
+ ../src/liblzma/common/stream_buffer_encoder.c \
+ ../src/liblzma/common/stream_decoder.c \
+ ../src/liblzma/common/stream_encoder.c \
+ ../src/liblzma/common/stream_flags_common.c \
+ ../src/liblzma/common/stream_flags_decoder.c \
+ ../src/liblzma/common/stream_flags_encoder.c \
+ ../src/liblzma/common/vli_decoder.c \
+ ../src/liblzma/common/vli_encoder.c \
+ ../src/liblzma/common/vli_size.c \
+ ../src/liblzma/check/check.c \
+ ../src/liblzma/check/crc32_table.c \
+ ../src/liblzma/check/crc64_table.c \
+ ../src/liblzma/check/sha256.c \
+ ../src/liblzma/rangecoder/price_table.c \
+ ../src/liblzma/lz/lz_decoder.c \
+ ../src/liblzma/lz/lz_encoder.c \
+ ../src/liblzma/lz/lz_encoder_mf.c \
+ ../src/liblzma/lzma/fastpos_table.c \
+ ../src/liblzma/lzma/lzma2_decoder.c \
+ ../src/liblzma/lzma/lzma2_encoder.c \
+ ../src/liblzma/lzma/lzma_decoder.c \
+ ../src/liblzma/lzma/lzma_encoder.c \
+ ../src/liblzma/lzma/lzma_encoder_optimum_fast.c \
+ ../src/liblzma/lzma/lzma_encoder_optimum_normal.c \
+ ../src/liblzma/lzma/lzma_encoder_presets.c \
+ ../src/liblzma/delta/delta_common.c \
+ ../src/liblzma/delta/delta_decoder.c \
+ ../src/liblzma/delta/delta_encoder.c \
+ ../src/liblzma/simple/arm.c \
+ ../src/liblzma/simple/armthumb.c \
+ ../src/liblzma/simple/ia64.c \
+ ../src/liblzma/simple/powerpc.c \
+ ../src/liblzma/simple/simple_coder.c \
+ ../src/liblzma/simple/simple_decoder.c \
+ ../src/liblzma/simple/simple_encoder.c \
+ ../src/liblzma/simple/sparc.c \
+ ../src/liblzma/simple/x86.c
+
+LIBLZMA_SRCS_ASM = \
+ ../src/liblzma/check/crc32_x86.S \
+ ../src/liblzma/check/crc64_x86.S
+
+LIBLZMA_OBJS_C = $(LIBLZMA_SRCS_C:.c=.o)
+LIBLZMA_OBJS_ASM = $(LIBLZMA_SRCS_ASM:.S=.o)
+LIBLZMA_OBJS = $(LIBLZMA_OBJS_C) $(LIBLZMA_OBJS_ASM)
+
+$(LIBLZMA_OBJS_C): %.o: %.c
+ $(CC) $(ALL_CPPFLAGS) $(ALL_CFLAGS) -c -o $@ $<
+
+$(LIBLZMA_OBJS_ASM): %.o: %.S
+ $(CC) $(ALL_CPPFLAGS) $(ALL_CFLAGS) -c -o $@ $<
+
+liblzma.a: $(LIBLZMA_OBJS)
+ $(RM) $@
+ $(AR) rcs $@ $(LIBLZMA_OBJS)
+ $(STRIP) --strip-unneeded $@
+
+# Avoid too long command lines.
+.PHONY: liblzma-clean $(LIBLZMA_OBJS:.o=-clean)
+liblzma-clean: $(LIBLZMA_OBJS:.o=-clean)
+ -$(RM) liblzma.a
+
+$(LIBLZMA_OBJS:.o=-clean):
+ -$(RM) $(@:-clean=.o)
+
+
+###############
+# getopt_long #
+###############
+
+GETOPT_SRCS = \
+ ../lib/getopt.c \
+ ../lib/getopt1.c
+
+GETOPT_OBJS = $(GETOPT_SRCS:.c=.o)
+
+GETOPT_H = ../lib/getopt.h
+
+$(GETOPT_H): %.h: %.in.h
+ $(SED) "" $< > $@
+
+$(GETOPT_OBJS): %.o: %.c $(GETOPT_H)
+ $(CC) $(ALL_CPPFLAGS) $(ALL_CFLAGS) -c -o $@ $<
+
+getopt.a: $(GETOPT_OBJS)
+ $(RM) $@
+ $(AR) rcs $@ $(GETOPT_OBJS)
+ $(STRIP) --strip-unneeded $@
+
+getopt-clean:
+ $(RM) $(GETOPT_H) $(GETOPT_OBJS) getopt.a
+
+
+###########################
+# xzdec.exe & lzmadec.exe #
+###########################
+
+XZDEC_SRCS = ../src/xzdec/xzdec.c
+
+xzdec.exe: getopt.a liblzma.a $(XZDEC_SRCS)
+ $(CC) $(ALL_CPPFLAGS) $(ALL_CFLAGS) $(XZDEC_SRCS) -o $@ getopt.a liblzma.a
+ $(STRIP) --strip-all $@
+ exe2coff $@
+ $(RM) $@
+ copy /b $(DJGPP:DJGPP.ENV=BIN\CWSDSTUB.EXE) + $(@:.exe=) $@
+ $(RM) $(@:.exe=)
+
+lzmadec.exe: getopt.a liblzma.a $(XZDEC_SRCS)
+ $(CC) $(ALL_CPPFLAGS) -DLZMADEC $(ALL_CFLAGS) $(XZDEC_SRCS) -o $@ getopt.a liblzma.a
+ $(STRIP) --strip-all $@
+ exe2coff $@
+ $(RM) $@
+ copy /b $(DJGPP:DJGPP.ENV=BIN\CWSDSTUB.EXE) + $(@:.exe=) $@
+ $(RM) $(@:.exe=)
+
+.PHONY: xzdec-clean
+xzdec-clean:
+ -$(RM) xzdec.exe lzmadec.exe xzdec lzmadec
+
+
+##########
+# xz.exe #
+##########
+
+XZ_SRCS = \
+ ../src/xz/args.c \
+ ../src/xz/coder.c \
+ ../src/xz/file_io.c \
+ ../src/xz/hardware.c \
+ ../src/xz/main.c \
+ ../src/xz/message.c \
+ ../src/xz/options.c \
+ ../src/xz/signals.c \
+ ../src/xz/suffix.c \
+ ../src/xz/util.c
+
+XZ_OBJS = $(XZ_SRCS:.c=.o)
+
+$(XZ_OBJS): %.o: %.c
+ $(CC) $(ALL_CPPFLAGS) $(ALL_CFLAGS) -c -o $@ $<
+
+xz.exe: getopt.a liblzma.a $(XZ_OBJS)
+ $(CC) $(ALL_CFLAGS) $(XZ_OBJS) -o $@ getopt.a liblzma.a
+ $(STRIP) --strip-all $@
+ exe2coff $@
+ $(RM) $@
+ copy /b $(DJGPP:DJGPP.ENV=BIN\CWSDSTUB.EXE) + $(@:.exe=) $@
+ $(RM) $(@:.exe=)
+
+# Avoid too long command lines.
+.PHONY: xz-clean $(XZ_OBJS:.o=-clean)
+xz-clean: $(XZ_OBJS:.o=-clean)
+ -$(RM) xz.exe xz
+
+$(XZ_OBJS:.o=-clean):
+ -$(RM) $(@:-clean=.o)
diff --git a/Build/source/utils/xz-4.999.9beta/dos/README b/Build/source/utils/xz-4.999.9beta/dos/README
new file mode 100644
index 00000000000..649c58c438d
--- /dev/null
+++ b/Build/source/utils/xz-4.999.9beta/dos/README
@@ -0,0 +1,113 @@
+
+XZ Utils on DOS
+===============
+
+Introduction
+
+ This document explains how to build XZ Utils for DOS using DJGPP.
+ The resulting binaries should run at least on various DOS versions
+ and under Windows 95/98/98SE/ME, which cannot run the Windows version
+ of XZ Utils.
+
+ This is currently experimental and has got very little testing.
+
+
+Getting and Installing DJGPP
+
+ You may use <http://www.delorie.com/djgpp/zip-picker.html> to help
+ deciding what to download, but as of writing (2009-02-13) that may
+ not be the most convenient way taking into account what components
+ are actually required to build XZ Utils. However, using the
+ zip-picker can still be worth doing to get nice short summary of
+ installation instructions (they can be found from readme.1st too).
+
+ For more manual method, first select a mirror from
+ <http://www.delorie.com/djgpp/getting.html>. You need
+ the following files:
+
+ unzip32.exe
+ beta/v2/djdev204.zip
+ v2gnu/bnu219b.zip
+ v2gnu/gcc432b.zip
+ v2gnu/mak3791b.zip
+ v2gnu/sed415b.zip
+ v2misc/csdpmi5b.zip
+
+ If newer versions are available, probably you should try them first.
+ Note that djdev203.zip is too old to build XZ Utils; you need at
+ least djdev204.zip. Also note that you want csdpmi5b.zip even if you
+ run under Windows or DOSEMU, because the XZ Utils Makefile will embed
+ cwsdstub.exe to the resulting binaries.
+
+ See the instructions in readme.1st found from djdev204.zip. Here's
+ a short summary, but you should still read readme.1st.
+
+ C:\> mkdir DJGPP
+ C:\> cd DJGPP
+ C:\DJGPP> c:\download\unzip32 c:\download\djdev204.zip
+ C:\DJGPP> c:\download\unzip32 c:\download\bnu219b.zip
+ C:\DJGPP> c:\download\unzip32 c:\download\gcc432b.zip
+ C:\DJGPP> c:\download\unzip32 c:\download\mak3791b.zip
+ C:\DJGPP> c:\download\unzip32 c:\download\sed415b.zip
+ C:\DJGPP> c:\download\unzip32 c:\download\csdpmi5b.zip
+
+ C:\DJGPP> set PATH=C:\DJGPP\BIN;%PATH%
+ C:\DJGPP> set DJGPP=C:\DJGPP\DJGPP.ENV
+
+ You may want to add the last two lines into AUTOEXEC.BAT or have,
+ for example, DJGPP.BAT which you can run before using DJGPP.
+
+ Make sure you use completely upper case path in the DJGPP environment
+ variable. This is not required by DJGPP, but the XZ Utils Makefile is
+ a bit stupid and expects that everything in DJGPP environment variable
+ is uppercase.
+
+
+Building
+
+ Just run "make" in this directory (the directory containing this
+ README). You should get liblzma.a, xz.exe, xzdec.exe, and
+ lzmadec.exe. Of these, probably xz.exe is the only interesting one.
+
+ Note: You need to have an environment that supports long filenames.
+ Once you have built XZ Utils, the resulting binaries can be run
+ without long filename support.
+
+
+Additional Make Flags and Targets
+
+ You may want to try some additional optimizations, which may or
+ may not make the code faster (and may or may not hit possible
+ compiler bugs more easily):
+
+ make CFLAGS="-O3 -fomit-frame-pointer -funroll-loops"
+
+ If you want to enable assertions (the assert() macro), use DEBUG=1.
+ You may want to disable optimizations too if you plan to actually
+ debug the code. Never use DEBUG=1 for production builds!
+
+ make DEBUG=1 CFLAGS="-g -O0"
+
+
+Bugs
+
+ "make clean" may remove src/xz/hardware.c when it tries to remove
+ src/xz/hardware-fixed.c. This is probably a bug somewhere in the
+ DOS environment I use. Maybe it tries truncated 8.3 name first and
+ since that gives a name of an existing file, it doesn't look for
+ long filename.
+
+ "xz -fc /dev/tty" hangs at least in DOSEMU and cannot be interrupted
+ by pressing C-c. Maybe xz should never accept non-regular files on
+ DOS even when --force is used.
+
+ Using different memory usage limit for encoding and decoding doesn't
+ make sense under pure DOS. Maybe it is still OK when running under
+ Windows.
+
+ The progress indicator of "xz -v" doesn't get updated when running
+ under Dosbox, but it works in DOSEMU. I currently (2009-02-13) don't
+ know if it works in other environments.
+
+ Report bugs to <lasse.collin@tukaani.org> (in English or Finnish).
+
diff --git a/Build/source/utils/xz-4.999.9beta/dos/config.h b/Build/source/utils/xz-4.999.9beta/dos/config.h
new file mode 100644
index 00000000000..9c9fff022f8
--- /dev/null
+++ b/Build/source/utils/xz-4.999.9beta/dos/config.h
@@ -0,0 +1,150 @@
+/* Define to 1 if using x86 assembler optimizations. */
+#define HAVE_ASM_X86 1
+
+/* Define to 1 if crc32 integrity check is enabled. */
+#define HAVE_CHECK_CRC32 1
+
+/* Define to 1 if crc64 integrity check is enabled. */
+#define HAVE_CHECK_CRC64 1
+
+/* Define to 1 if sha256 integrity check is enabled. */
+#define HAVE_CHECK_SHA256 1
+
+/* Define to 1 if decoder components are enabled. */
+#define HAVE_DECODER 1
+
+/* Define to 1 if arm decoder is enabled. */
+#define HAVE_DECODER_ARM 1
+
+/* Define to 1 if armthumb decoder is enabled. */
+#define HAVE_DECODER_ARMTHUMB 1
+
+/* Define to 1 if delta decoder is enabled. */
+#define HAVE_DECODER_DELTA 1
+
+/* Define to 1 if ia64 decoder is enabled. */
+#define HAVE_DECODER_IA64 1
+
+/* Define to 1 if lzma1 decoder is enabled. */
+#define HAVE_DECODER_LZMA1 1
+
+/* Define to 1 if lzma2 decoder is enabled. */
+#define HAVE_DECODER_LZMA2 1
+
+/* Define to 1 if powerpc decoder is enabled. */
+#define HAVE_DECODER_POWERPC 1
+
+/* Define to 1 if sparc decoder is enabled. */
+#define HAVE_DECODER_SPARC 1
+
+/* Define to 1 if subblock decoder is enabled. */
+/* #undef HAVE_DECODER_SUBBLOCK */
+
+/* Define to 1 if x86 decoder is enabled. */
+#define HAVE_DECODER_X86 1
+
+/* Define to 1 if encoder components are enabled. */
+#define HAVE_ENCODER 1
+
+/* Define to 1 if arm encoder is enabled. */
+#define HAVE_ENCODER_ARM 1
+
+/* Define to 1 if armthumb encoder is enabled. */
+#define HAVE_ENCODER_ARMTHUMB 1
+
+/* Define to 1 if delta encoder is enabled. */
+#define HAVE_ENCODER_DELTA 1
+
+/* Define to 1 if ia64 encoder is enabled. */
+#define HAVE_ENCODER_IA64 1
+
+/* Define to 1 if lzma1 encoder is enabled. */
+#define HAVE_ENCODER_LZMA1 1
+
+/* Define to 1 if lzma2 encoder is enabled. */
+#define HAVE_ENCODER_LZMA2 1
+
+/* Define to 1 if powerpc encoder is enabled. */
+#define HAVE_ENCODER_POWERPC 1
+
+/* Define to 1 if sparc encoder is enabled. */
+#define HAVE_ENCODER_SPARC 1
+
+/* Define to 1 if subblock encoder is enabled. */
+/* #undef HAVE_ENCODER_SUBBLOCK */
+
+/* Define to 1 if x86 encoder is enabled. */
+#define HAVE_ENCODER_X86 1
+
+/* Define to 1 if the system supports fast unaligned memory access. */
+#define HAVE_FAST_UNALIGNED_ACCESS 1
+
+/* Define to 1 if you have the <inttypes.h> header file. */
+#define HAVE_INTTYPES_H 1
+
+/* Define to 1 if you have the <limits.h> header file. */
+#define HAVE_LIMITS_H 1
+
+/* Define to 1 if you have the <memory.h> header file. */
+#define HAVE_MEMORY_H 1
+
+/* Define to 1 to enable bt2 match finder. */
+#define HAVE_MF_BT2 1
+
+/* Define to 1 to enable bt3 match finder. */
+#define HAVE_MF_BT3 1
+
+/* Define to 1 to enable bt4 match finder. */
+#define HAVE_MF_BT4 1
+
+/* Define to 1 to enable hc3 match finder. */
+#define HAVE_MF_HC3 1
+
+/* Define to 1 to enable hc4 match finder. */
+#define HAVE_MF_HC4 1
+
+/* Define to 1 if optimizing for size. */
+/* #undef HAVE_SMALL */
+
+/* Define to 1 if stdbool.h conforms to C99. */
+#define HAVE_STDBOOL_H 1
+
+/* Define to 1 if you have the <stdint.h> header file. */
+#define HAVE_STDINT_H 1
+
+/* Define to 1 if you have the <stdlib.h> header file. */
+#define HAVE_STDLIB_H 1
+
+/* Define to 1 if you have the <strings.h> header file. */
+#define HAVE_STRINGS_H 1
+
+/* Define to 1 if you have the <string.h> header file. */
+#define HAVE_STRING_H 1
+
+/* Define to 1 if the system has the type `uintptr_t'. */
+#define HAVE_UINTPTR_T 1
+
+/* Define to 1 if you have the <sys/time.h> header file. */
+#define HAVE_SYS_TIME_H 1
+
+/* Define to 1 if you have the `utimes' function. */
+#define HAVE_UTIMES 1
+
+/* Define to 1 or 0, depending whether the compiler supports simple visibility
+ declarations. */
+#define HAVE_VISIBILITY 0
+
+/* Define to 1 if the system has the type `_Bool'. */
+#define HAVE__BOOL 1
+
+/* Define to the address where bug reports for this package should be sent. */
+#define PACKAGE_BUGREPORT "lasse.collin@tukaani.org"
+
+/* Define to the full name of this package. */
+#define PACKAGE_NAME "XZ Utils"
+
+/* The size of `size_t', as computed by sizeof. */
+#define SIZEOF_SIZE_T 4
+
+/* Define to 1 if you have the ANSI C header files. */
+#define STDC_HEADERS 1
diff --git a/Build/source/utils/xz-4.999.8beta/extra/7z2lzma/7z2lzma.bash b/Build/source/utils/xz-4.999.9beta/extra/7z2lzma/7z2lzma.bash
index 35ea4dae973..35ea4dae973 100755
--- a/Build/source/utils/xz-4.999.8beta/extra/7z2lzma/7z2lzma.bash
+++ b/Build/source/utils/xz-4.999.9beta/extra/7z2lzma/7z2lzma.bash
diff --git a/Build/source/utils/xz-4.999.8beta/extra/scanlzma/scanlzma.c b/Build/source/utils/xz-4.999.9beta/extra/scanlzma/scanlzma.c
index 5c3b25be32a..5c3b25be32a 100644
--- a/Build/source/utils/xz-4.999.8beta/extra/scanlzma/scanlzma.c
+++ b/Build/source/utils/xz-4.999.9beta/extra/scanlzma/scanlzma.c
diff --git a/Build/source/utils/xz-4.999.9beta/lib/Makefile.am b/Build/source/utils/xz-4.999.9beta/lib/Makefile.am
new file mode 100644
index 00000000000..0dbd9c42b72
--- /dev/null
+++ b/Build/source/utils/xz-4.999.9beta/lib/Makefile.am
@@ -0,0 +1,32 @@
+##
+## Copyright (C) 2004-2007 Free Software Foundation, Inc.
+##
+## This program is free software; you can redistribute it and/or modify
+## it under the terms of the GNU General Public License as published by
+## the Free Software Foundation; either version 2 of the License, or
+## (at your option) any later version.
+##
+## This program is distributed in the hope that it will be useful,
+## but WITHOUT ANY WARRANTY; without even the implied warranty of
+## MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+## GNU General Public License for more details.
+##
+
+## Not using gnulib-tool, at least for now. It is likely that we won't
+## need anything else from Gnulib than getopt_long().
+
+noinst_LIBRARIES = libgnu.a
+
+libgnu_a_SOURCES =
+libgnu_a_DEPENDENCIES = $(LIBOBJS)
+libgnu_a_LIBADD = $(LIBOBJS)
+
+EXTRA_DIST = getopt.in.h getopt.c getopt1.c getopt_int.h
+BUILT_SOURCES = $(GETOPT_H)
+MOSTLYCLEANFILES = getopt.h getopt.h-t
+
+getopt.h: getopt.in.h
+ { echo '/* DO NOT EDIT! GENERATED AUTOMATICALLY! */'; \
+ cat $(srcdir)/getopt.in.h; \
+ } > $@-t
+ mv -f $@-t $@
diff --git a/Build/source/utils/xz-4.999.8beta/lib/Makefile.in b/Build/source/utils/xz-4.999.9beta/lib/Makefile.in
index 19a190ba212..6434e2868eb 100644
--- a/Build/source/utils/xz-4.999.8beta/lib/Makefile.in
+++ b/Build/source/utils/xz-4.999.9beta/lib/Makefile.in
@@ -1,8 +1,9 @@
-# Makefile.in generated by automake 1.10.2 from Makefile.am.
+# Makefile.in generated by automake 1.11 from Makefile.am.
# @configure_input@
# Copyright (C) 1994, 1995, 1996, 1997, 1998, 1999, 2000, 2001, 2002,
-# 2003, 2004, 2005, 2006, 2007, 2008 Free Software Foundation, Inc.
+# 2003, 2004, 2005, 2006, 2007, 2008, 2009 Free Software Foundation,
+# Inc.
# This Makefile.in is free software; the Free Software Foundation
# gives unlimited permission to copy and/or distribute it,
# with or without modifications, as long as this notice is preserved.
@@ -16,8 +17,9 @@
VPATH = @srcdir@
pkgdatadir = $(datadir)/@PACKAGE@
-pkglibdir = $(libdir)/@PACKAGE@
pkgincludedir = $(includedir)/@PACKAGE@
+pkglibdir = $(libdir)/@PACKAGE@
+pkglibexecdir = $(libexecdir)/@PACKAGE@
am__cd = CDPATH="$${ZSH_VERSION+.}$(PATH_SEPARATOR)" && cd
install_sh_DATA = $(install_sh) -c -m 644
install_sh_PROGRAM = $(install_sh) -c
@@ -38,23 +40,30 @@ DIST_COMMON = $(srcdir)/Makefile.am $(srcdir)/Makefile.in getopt.c \
ACLOCAL_M4 = $(top_srcdir)/aclocal.m4
am__aclocal_m4_deps = $(top_srcdir)/m4/acx_pthread.m4 \
$(top_srcdir)/m4/getopt.m4 $(top_srcdir)/m4/gettext.m4 \
- $(top_srcdir)/m4/iconv.m4 $(top_srcdir)/m4/lib-ld.m4 \
+ $(top_srcdir)/m4/iconv.m4 $(top_srcdir)/m4/lc_cpucores.m4 \
+ $(top_srcdir)/m4/lc_physmem.m4 $(top_srcdir)/m4/lib-ld.m4 \
$(top_srcdir)/m4/lib-link.m4 $(top_srcdir)/m4/lib-prefix.m4 \
- $(top_srcdir)/m4/nls.m4 $(top_srcdir)/m4/po.m4 \
- $(top_srcdir)/m4/progtest.m4 $(top_srcdir)/configure.ac
+ $(top_srcdir)/m4/libtool.m4 $(top_srcdir)/m4/ltoptions.m4 \
+ $(top_srcdir)/m4/ltsugar.m4 $(top_srcdir)/m4/ltversion.m4 \
+ $(top_srcdir)/m4/lt~obsolete.m4 $(top_srcdir)/m4/nls.m4 \
+ $(top_srcdir)/m4/po.m4 $(top_srcdir)/m4/posix-shell.m4 \
+ $(top_srcdir)/m4/progtest.m4 $(top_srcdir)/m4/visibility.m4 \
+ $(top_srcdir)/configure.ac
am__configure_deps = $(am__aclocal_m4_deps) $(CONFIGURE_DEPENDENCIES) \
$(ACLOCAL_M4)
mkinstalldirs = $(install_sh) -d
CONFIG_HEADER = $(top_builddir)/config.h
CONFIG_CLEAN_FILES =
+CONFIG_CLEAN_VPATH_FILES =
LIBRARIES = $(noinst_LIBRARIES)
ARFLAGS = cru
libgnu_a_AR = $(AR) $(ARFLAGS)
am_libgnu_a_OBJECTS =
libgnu_a_OBJECTS = $(am_libgnu_a_OBJECTS)
DEFAULT_INCLUDES = -I.@am__isrc@ -I$(top_builddir)
-depcomp = $(SHELL) $(top_srcdir)/depcomp
+depcomp = $(SHELL) $(top_srcdir)/build-aux/depcomp
am__depfiles_maybe = depfiles
+am__mv = mv -f
COMPILE = $(CC) $(DEFS) $(DEFAULT_INCLUDES) $(INCLUDES) $(AM_CPPFLAGS) \
$(CPPFLAGS) $(AM_CFLAGS) $(CFLAGS)
LTCOMPILE = $(LIBTOOL) --tag=CC $(AM_LIBTOOLFLAGS) $(LIBTOOLFLAGS) \
@@ -71,7 +80,9 @@ CTAGS = ctags
DISTFILES = $(DIST_COMMON) $(DIST_SOURCES) $(TEXINFOS) $(EXTRA_DIST)
ACLOCAL = @ACLOCAL@
AMTAR = @AMTAR@
+AM_CFLAGS = @AM_CFLAGS@
AR = @AR@
+AS = @AS@
AUTOCONF = @AUTOCONF@
AUTOHEADER = @AUTOHEADER@
AUTOMAKE = @AUTOMAKE@
@@ -85,22 +96,20 @@ CFLAGS = @CFLAGS@
CFLAG_VISIBILITY = @CFLAG_VISIBILITY@
CPP = @CPP@
CPPFLAGS = @CPPFLAGS@
-CXX = @CXX@
-CXXCPP = @CXXCPP@
-CXXDEPMODE = @CXXDEPMODE@
-CXXFLAGS = @CXXFLAGS@
CYGPATH_W = @CYGPATH_W@
DEFS = @DEFS@
DEPDIR = @DEPDIR@
+DLLTOOL = @DLLTOOL@
DSYMUTIL = @DSYMUTIL@
-ECHO = @ECHO@
+DUMPBIN = @DUMPBIN@
+DYNAMIC_CPPFLAGS = @DYNAMIC_CPPFLAGS@
+DYNAMIC_LDFLAGS = @DYNAMIC_LDFLAGS@
ECHO_C = @ECHO_C@
ECHO_N = @ECHO_N@
ECHO_T = @ECHO_T@
EGREP = @EGREP@
EXEEXT = @EXEEXT@
-F77 = @F77@
-FFLAGS = @FFLAGS@
+FGREP = @FGREP@
GETOPT_H = @GETOPT_H@
GMSGFMT = @GMSGFMT@
GMSGFMT_015 = @GMSGFMT_015@
@@ -113,12 +122,14 @@ INSTALL_SCRIPT = @INSTALL_SCRIPT@
INSTALL_STRIP_PROGRAM = @INSTALL_STRIP_PROGRAM@
INTLLIBS = @INTLLIBS@
INTL_MACOSX_LIBS = @INTL_MACOSX_LIBS@
+LD = @LD@
LDFLAGS = @LDFLAGS@
LIBICONV = @LIBICONV@
LIBINTL = @LIBINTL@
LIBOBJS = @LIBOBJS@
LIBS = @LIBS@
LIBTOOL = @LIBTOOL@
+LIPO = @LIPO@
LN_S = @LN_S@
LTLIBICONV = @LTLIBICONV@
LTLIBINTL = @LTLIBINTL@
@@ -128,23 +139,34 @@ MKDIR_P = @MKDIR_P@
MSGFMT = @MSGFMT@
MSGFMT_015 = @MSGFMT_015@
MSGMERGE = @MSGMERGE@
+NM = @NM@
NMEDIT = @NMEDIT@
+OBJDUMP = @OBJDUMP@
OBJEXT = @OBJEXT@
+OTOOL = @OTOOL@
+OTOOL64 = @OTOOL64@
PACKAGE = @PACKAGE@
PACKAGE_BUGREPORT = @PACKAGE_BUGREPORT@
+PACKAGE_HOMEPAGE = @PACKAGE_HOMEPAGE@
PACKAGE_NAME = @PACKAGE_NAME@
PACKAGE_STRING = @PACKAGE_STRING@
PACKAGE_TARNAME = @PACKAGE_TARNAME@
+PACKAGE_URL = @PACKAGE_URL@
PACKAGE_VERSION = @PACKAGE_VERSION@
PATH_SEPARATOR = @PATH_SEPARATOR@
+POSIX_SHELL = @POSIX_SHELL@
POSUB = @POSUB@
+PREFERABLY_POSIX_SHELL = @PREFERABLY_POSIX_SHELL@
PTHREAD_CC = @PTHREAD_CC@
PTHREAD_CFLAGS = @PTHREAD_CFLAGS@
PTHREAD_LIBS = @PTHREAD_LIBS@
RANLIB = @RANLIB@
+RC = @RC@
SED = @SED@
SET_MAKE = @SET_MAKE@
SHELL = @SHELL@
+STATIC_CPPFLAGS = @STATIC_CPPFLAGS@
+STATIC_LDFLAGS = @STATIC_LDFLAGS@
STRIP = @STRIP@
USE_NLS = @USE_NLS@
VERSION = @VERSION@
@@ -155,8 +177,7 @@ abs_srcdir = @abs_srcdir@
abs_top_builddir = @abs_top_builddir@
abs_top_srcdir = @abs_top_srcdir@
ac_ct_CC = @ac_ct_CC@
-ac_ct_CXX = @ac_ct_CXX@
-ac_ct_F77 = @ac_ct_F77@
+ac_ct_DUMPBIN = @ac_ct_DUMPBIN@
acx_pthread_config = @acx_pthread_config@
am__include = @am__include@
am__leading_dot = @am__leading_dot@
@@ -188,6 +209,7 @@ libdir = @libdir@
libexecdir = @libexecdir@
localedir = @localedir@
localstatedir = @localstatedir@
+lt_ECHO = @lt_ECHO@
mandir = @mandir@
mkdir_p = @mkdir_p@
oldincludedir = @oldincludedir@
@@ -203,6 +225,7 @@ target_alias = @target_alias@
top_build_prefix = @top_build_prefix@
top_builddir = @top_builddir@
top_srcdir = @top_srcdir@
+xz = @xz@
noinst_LIBRARIES = libgnu.a
libgnu_a_SOURCES =
libgnu_a_DEPENDENCIES = $(LIBOBJS)
@@ -224,9 +247,9 @@ $(srcdir)/Makefile.in: $(srcdir)/Makefile.am $(am__configure_deps)
exit 1;; \
esac; \
done; \
- echo ' cd $(top_srcdir) && $(AUTOMAKE) --foreign lib/Makefile'; \
- cd $(top_srcdir) && \
- $(AUTOMAKE) --foreign lib/Makefile
+ echo ' cd $(top_srcdir) && $(AUTOMAKE) --foreign lib/Makefile'; \
+ $(am__cd) $(top_srcdir) && \
+ $(AUTOMAKE) --foreign lib/Makefile
.PRECIOUS: Makefile
Makefile: $(srcdir)/Makefile.in $(top_builddir)/config.status
@case '$?' in \
@@ -244,6 +267,7 @@ $(top_srcdir)/configure: $(am__configure_deps)
cd $(top_builddir) && $(MAKE) $(AM_MAKEFLAGS) am--refresh
$(ACLOCAL_M4): $(am__aclocal_m4_deps)
cd $(top_builddir) && $(MAKE) $(AM_MAKEFLAGS) am--refresh
+$(am__aclocal_m4_deps):
clean-noinstLIBRARIES:
-test -z "$(noinst_LIBRARIES)" || rm -f $(noinst_LIBRARIES)
@@ -263,21 +287,21 @@ distclean-compile:
.c.o:
@am__fastdepCC_TRUE@ $(COMPILE) -MT $@ -MD -MP -MF $(DEPDIR)/$*.Tpo -c -o $@ $<
-@am__fastdepCC_TRUE@ mv -f $(DEPDIR)/$*.Tpo $(DEPDIR)/$*.Po
+@am__fastdepCC_TRUE@ $(am__mv) $(DEPDIR)/$*.Tpo $(DEPDIR)/$*.Po
@AMDEP_TRUE@@am__fastdepCC_FALSE@ source='$<' object='$@' libtool=no @AMDEPBACKSLASH@
@AMDEP_TRUE@@am__fastdepCC_FALSE@ DEPDIR=$(DEPDIR) $(CCDEPMODE) $(depcomp) @AMDEPBACKSLASH@
@am__fastdepCC_FALSE@ $(COMPILE) -c $<
.c.obj:
@am__fastdepCC_TRUE@ $(COMPILE) -MT $@ -MD -MP -MF $(DEPDIR)/$*.Tpo -c -o $@ `$(CYGPATH_W) '$<'`
-@am__fastdepCC_TRUE@ mv -f $(DEPDIR)/$*.Tpo $(DEPDIR)/$*.Po
+@am__fastdepCC_TRUE@ $(am__mv) $(DEPDIR)/$*.Tpo $(DEPDIR)/$*.Po
@AMDEP_TRUE@@am__fastdepCC_FALSE@ source='$<' object='$@' libtool=no @AMDEPBACKSLASH@
@AMDEP_TRUE@@am__fastdepCC_FALSE@ DEPDIR=$(DEPDIR) $(CCDEPMODE) $(depcomp) @AMDEPBACKSLASH@
@am__fastdepCC_FALSE@ $(COMPILE) -c `$(CYGPATH_W) '$<'`
.c.lo:
@am__fastdepCC_TRUE@ $(LTCOMPILE) -MT $@ -MD -MP -MF $(DEPDIR)/$*.Tpo -c -o $@ $<
-@am__fastdepCC_TRUE@ mv -f $(DEPDIR)/$*.Tpo $(DEPDIR)/$*.Plo
+@am__fastdepCC_TRUE@ $(am__mv) $(DEPDIR)/$*.Tpo $(DEPDIR)/$*.Plo
@AMDEP_TRUE@@am__fastdepCC_FALSE@ source='$<' object='$@' libtool=yes @AMDEPBACKSLASH@
@AMDEP_TRUE@@am__fastdepCC_FALSE@ DEPDIR=$(DEPDIR) $(CCDEPMODE) $(depcomp) @AMDEPBACKSLASH@
@am__fastdepCC_FALSE@ $(LTCOMPILE) -c -o $@ $<
@@ -300,7 +324,7 @@ tags: TAGS
TAGS: $(HEADERS) $(SOURCES) $(TAGS_DEPENDENCIES) \
$(TAGS_FILES) $(LISP)
- tags=; \
+ set x; \
here=`pwd`; \
list='$(SOURCES) $(HEADERS) $(LISP) $(TAGS_FILES)'; \
unique=`for i in $$list; do \
@@ -308,29 +332,34 @@ TAGS: $(HEADERS) $(SOURCES) $(TAGS_DEPENDENCIES) \
done | \
$(AWK) '{ files[$$0] = 1; nonempty = 1; } \
END { if (nonempty) { for (i in files) print i; }; }'`; \
- if test -z "$(ETAGS_ARGS)$$tags$$unique"; then :; else \
+ shift; \
+ if test -z "$(ETAGS_ARGS)$$*$$unique"; then :; else \
test -n "$$unique" || unique=$$empty_fix; \
- $(ETAGS) $(ETAGSFLAGS) $(AM_ETAGSFLAGS) $(ETAGS_ARGS) \
- $$tags $$unique; \
+ if test $$# -gt 0; then \
+ $(ETAGS) $(ETAGSFLAGS) $(AM_ETAGSFLAGS) $(ETAGS_ARGS) \
+ "$$@" $$unique; \
+ else \
+ $(ETAGS) $(ETAGSFLAGS) $(AM_ETAGSFLAGS) $(ETAGS_ARGS) \
+ $$unique; \
+ fi; \
fi
ctags: CTAGS
CTAGS: $(HEADERS) $(SOURCES) $(TAGS_DEPENDENCIES) \
$(TAGS_FILES) $(LISP)
- tags=; \
list='$(SOURCES) $(HEADERS) $(LISP) $(TAGS_FILES)'; \
unique=`for i in $$list; do \
if test -f "$$i"; then echo $$i; else echo $(srcdir)/$$i; fi; \
done | \
$(AWK) '{ files[$$0] = 1; nonempty = 1; } \
END { if (nonempty) { for (i in files) print i; }; }'`; \
- test -z "$(CTAGS_ARGS)$$tags$$unique" \
+ test -z "$(CTAGS_ARGS)$$unique" \
|| $(CTAGS) $(CTAGSFLAGS) $(AM_CTAGSFLAGS) $(CTAGS_ARGS) \
- $$tags $$unique
+ $$unique
GTAGS:
here=`$(am__cd) $(top_builddir) && pwd` \
- && cd $(top_srcdir) \
- && gtags -i $(GTAGS_ARGS) $$here
+ && $(am__cd) $(top_srcdir) \
+ && gtags -i $(GTAGS_ARGS) "$$here"
distclean-tags:
-rm -f TAGS ID GTAGS GRTAGS GSYMS GPATH tags
@@ -351,13 +380,17 @@ distdir: $(DISTFILES)
if test -f $$file || test -d $$file; then d=.; else d=$(srcdir); fi; \
if test -d $$d/$$file; then \
dir=`echo "/$$file" | sed -e 's,/[^/]*$$,,'`; \
+ if test -d "$(distdir)/$$file"; then \
+ find "$(distdir)/$$file" -type d ! -perm -700 -exec chmod u+rwx {} \;; \
+ fi; \
if test -d $(srcdir)/$$file && test $$d != $(srcdir); then \
- cp -pR $(srcdir)/$$file $(distdir)$$dir || exit 1; \
+ cp -fpR $(srcdir)/$$file "$(distdir)$$dir" || exit 1; \
+ find "$(distdir)/$$file" -type d ! -perm -700 -exec chmod u+rwx {} \;; \
fi; \
- cp -pR $$d/$$file $(distdir)$$dir || exit 1; \
+ cp -fpR $$d/$$file "$(distdir)$$dir" || exit 1; \
else \
- test -f $(distdir)/$$file \
- || cp -p $$d/$$file $(distdir)/$$file \
+ test -f "$(distdir)/$$file" \
+ || cp -p $$d/$$file "$(distdir)/$$file" \
|| exit 1; \
fi; \
done
@@ -388,6 +421,7 @@ clean-generic:
distclean-generic:
-test -z "$(CONFIG_CLEAN_FILES)" || rm -f $(CONFIG_CLEAN_FILES)
+ -test . = "$(srcdir)" || test -z "$(CONFIG_CLEAN_VPATH_FILES)" || rm -f $(CONFIG_CLEAN_VPATH_FILES)
maintainer-clean-generic:
@echo "This command is intended for maintainers to use"
@@ -410,6 +444,8 @@ dvi-am:
html: html-am
+html-am:
+
info: info-am
info-am:
@@ -418,18 +454,28 @@ install-data-am:
install-dvi: install-dvi-am
+install-dvi-am:
+
install-exec-am:
install-html: install-html-am
+install-html-am:
+
install-info: install-info-am
+install-info-am:
+
install-man:
install-pdf: install-pdf-am
+install-pdf-am:
+
install-ps: install-ps-am
+install-ps-am:
+
installcheck-am:
maintainer-clean: maintainer-clean-am
@@ -452,7 +498,7 @@ ps-am:
uninstall-am:
-.MAKE: install-am install-strip
+.MAKE: all check install install-am install-strip
.PHONY: CTAGS GTAGS all all-am check check-am clean clean-generic \
clean-libtool clean-noinstLIBRARIES ctags distclean \
@@ -473,6 +519,7 @@ getopt.h: getopt.in.h
cat $(srcdir)/getopt.in.h; \
} > $@-t
mv -f $@-t $@
+
# Tell versions [3.59,3.63) of GNU make to not export all variables.
# Otherwise a system limit (for SysV at least) may be exceeded.
.NOEXPORT:
diff --git a/Build/source/utils/xz-4.999.8beta/lib/getopt.c b/Build/source/utils/xz-4.999.9beta/lib/getopt.c
index 1d14b245b2b..1d14b245b2b 100644
--- a/Build/source/utils/xz-4.999.8beta/lib/getopt.c
+++ b/Build/source/utils/xz-4.999.9beta/lib/getopt.c
diff --git a/Build/source/utils/xz-4.999.8beta/lib/getopt.in.h b/Build/source/utils/xz-4.999.9beta/lib/getopt.in.h
index ea77e3d749d..ea77e3d749d 100644
--- a/Build/source/utils/xz-4.999.8beta/lib/getopt.in.h
+++ b/Build/source/utils/xz-4.999.9beta/lib/getopt.in.h
diff --git a/Build/source/utils/xz-4.999.8beta/lib/getopt1.c b/Build/source/utils/xz-4.999.9beta/lib/getopt1.c
index da5d53300b1..da5d53300b1 100644
--- a/Build/source/utils/xz-4.999.8beta/lib/getopt1.c
+++ b/Build/source/utils/xz-4.999.9beta/lib/getopt1.c
diff --git a/Build/source/utils/xz-4.999.8beta/lib/getopt_int.h b/Build/source/utils/xz-4.999.9beta/lib/getopt_int.h
index 401579fd289..401579fd289 100644
--- a/Build/source/utils/xz-4.999.8beta/lib/getopt_int.h
+++ b/Build/source/utils/xz-4.999.9beta/lib/getopt_int.h
diff --git a/Build/source/utils/xz-4.999.8beta/m4/acx_pthread.m4 b/Build/source/utils/xz-4.999.9beta/m4/acx_pthread.m4
index d2b116945f9..d2b116945f9 100644
--- a/Build/source/utils/xz-4.999.8beta/m4/acx_pthread.m4
+++ b/Build/source/utils/xz-4.999.9beta/m4/acx_pthread.m4
diff --git a/Build/source/utils/xz-4.999.8beta/m4/getopt.m4 b/Build/source/utils/xz-4.999.9beta/m4/getopt.m4
index ffba95e2ac4..cfbe40f254e 100644
--- a/Build/source/utils/xz-4.999.8beta/m4/getopt.m4
+++ b/Build/source/utils/xz-4.999.9beta/m4/getopt.m4
@@ -30,6 +30,10 @@ AC_DEFUN([gl_GETOPT_CHECK_HEADERS],
AC_CHECK_HEADERS([getopt.h], [], [GETOPT_H=getopt.h])
fi
+ if test -z "$GETOPT_H"; then
+ AC_CHECK_FUNCS([getopt_long], [], [GETOPT_H=getopt.h])
+ fi
+
dnl BSD getopt_long uses a way to reset option processing, that is different
dnl from GNU and Solaris (which copied the GNU behavior). We support both
dnl GNU and BSD style resetting of getopt_long(), so there's no need to use
diff --git a/Build/source/utils/xz-4.999.8beta/m4/gettext.m4 b/Build/source/utils/xz-4.999.9beta/m4/gettext.m4
index 91c345e992f..91c345e992f 100644
--- a/Build/source/utils/xz-4.999.8beta/m4/gettext.m4
+++ b/Build/source/utils/xz-4.999.9beta/m4/gettext.m4
diff --git a/Build/source/utils/xz-4.999.8beta/m4/iconv.m4 b/Build/source/utils/xz-4.999.9beta/m4/iconv.m4
index 654c4158943..654c4158943 100644
--- a/Build/source/utils/xz-4.999.8beta/m4/iconv.m4
+++ b/Build/source/utils/xz-4.999.9beta/m4/iconv.m4
diff --git a/Build/source/utils/xz-4.999.9beta/m4/lc_cpucores.m4 b/Build/source/utils/xz-4.999.9beta/m4/lc_cpucores.m4
new file mode 100644
index 00000000000..2fae953ad47
--- /dev/null
+++ b/Build/source/utils/xz-4.999.9beta/m4/lc_cpucores.m4
@@ -0,0 +1,57 @@
+dnl ###########################################################################
+dnl
+dnl lc_CPUCORES - Check how to find out the number of online CPU cores
+dnl
+dnl Check how to find out the number of available CPU cores in the system.
+dnl sysconf(_SC_NPROCESSORS_ONLN) works on most systems, except that BSDs
+dnl use sysctl().
+dnl
+dnl ###########################################################################
+dnl
+dnl Author: Lasse Collin
+dnl
+dnl This file has been put into the public domain.
+dnl You can do whatever you want with this file.
+dnl
+dnl ###########################################################################
+AC_DEFUN([lc_CPUCORES], [
+AC_MSG_CHECKING([how to detect the number of available CPU cores])
+AC_COMPILE_IFELSE([AC_LANG_SOURCE([[
+#include <unistd.h>
+int
+main(void)
+{
+ long i;
+ i = sysconf(_SC_NPROCESSORS_ONLN);
+ return 0;
+}
+]])], [
+ AC_DEFINE([HAVE_CPUCORES_SYSCONF], [1],
+ [Define to 1 if the number of available CPU cores can be
+ detected with sysconf(_SC_NPROCESSORS_ONLN).])
+ AC_MSG_RESULT([sysconf])
+], [
+AC_COMPILE_IFELSE([AC_LANG_SOURCE([[
+#include <sys/types.h>
+#ifdef HAVE_SYS_PARAM_H
+# include <sys/param.h>
+#endif
+#include <sys/sysctl.h>
+int
+main(void)
+{
+ int name[2] = { CTL_HW, HW_NCPU };
+ int cpus;
+ size_t cpus_size = sizeof(cpus);
+ sysctl(name, 2, &cpus, &cpus_size, NULL, NULL);
+ return 0;
+}
+]])], [
+ AC_DEFINE([HAVE_CPUCORES_SYSCTL], [1],
+ [Define to 1 if the number of available CPU cores can be
+ detected with sysctl().])
+ AC_MSG_RESULT([sysctl])
+], [
+ AC_MSG_RESULT([unknown])
+])])
+])dnl lc_CPUCORES
diff --git a/Build/source/utils/xz-4.999.9beta/m4/lc_physmem.m4 b/Build/source/utils/xz-4.999.9beta/m4/lc_physmem.m4
new file mode 100644
index 00000000000..78be1362db2
--- /dev/null
+++ b/Build/source/utils/xz-4.999.9beta/m4/lc_physmem.m4
@@ -0,0 +1,84 @@
+dnl ###########################################################################
+dnl
+dnl lc_PHYSMEM - Check how to find out the amount of physical memory
+dnl
+dnl - sysconf() gives all the needed info on GNU+Linux and Solaris.
+dnl - BSDs use sysctl().
+dnl - sysinfo() works on Linux/dietlibc and probably on other Linux systems
+dnl whose libc may lack sysconf().
+dnl
+dnl ###########################################################################
+dnl
+dnl Author: Lasse Collin
+dnl
+dnl This file has been put into the public domain.
+dnl You can do whatever you want with this file.
+dnl
+dnl ###########################################################################
+AC_DEFUN([lc_PHYSMEM], [
+AC_MSG_CHECKING([how to detect the amount of physical memory])
+AC_COMPILE_IFELSE([AC_LANG_SOURCE([[
+#include <unistd.h>
+int
+main(void)
+{
+ long i;
+ i = sysconf(_SC_PAGESIZE);
+ i = sysconf(_SC_PHYS_PAGES);
+ return 0;
+}
+]])], [
+ AC_DEFINE([HAVE_PHYSMEM_SYSCONF], [1],
+ [Define to 1 if the amount of physical memory can be detected
+ with sysconf(_SC_PAGESIZE) and sysconf(_SC_PHYS_PAGES).])
+ AC_MSG_RESULT([sysconf])
+], [
+AC_COMPILE_IFELSE([AC_LANG_SOURCE([[
+#include <sys/types.h>
+#ifdef HAVE_SYS_PARAM_H
+# include <sys/param.h>
+#endif
+#include <sys/sysctl.h>
+int
+main(void)
+{
+ int name[2] = { CTL_HW, HW_PHYSMEM };
+ unsigned long mem;
+ size_t mem_ptr_size = sizeof(mem);
+ sysctl(name, 2, &mem, &mem_ptr_size, NULL, NULL);
+ return 0;
+}
+]])], [
+ AC_DEFINE([HAVE_PHYSMEM_SYSCTL], [1],
+ [Define to 1 if the amount of physical memory can be detected
+ with sysctl().])
+ AC_MSG_RESULT([sysctl])
+], [
+dnl sysinfo() is Linux-specific. Some non-Linux systems have
+dnl incompatible sysinfo() so we must check $host_os.
+case $host_os in
+ linux*)
+ AC_COMPILE_IFELSE([AC_LANG_SOURCE([[
+#include <sys/sysinfo.h>
+int
+main(void)
+{
+ struct sysinfo si;
+ sysinfo(&si);
+ return 0;
+}
+ ]])], [
+ AC_DEFINE([HAVE_PHYSMEM_SYSINFO], [1],
+ [Define to 1 if the amount of physical memory
+ can be detected with Linux sysinfo().])
+ AC_MSG_RESULT([sysinfo])
+ ], [
+ AC_MSG_RESULT([unknown])
+ ])
+ ;;
+ *)
+ AC_MSG_RESULT([unknown])
+ ;;
+esac
+])])
+])dnl lc_PHYSMEM
diff --git a/Build/source/utils/xz-4.999.8beta/m4/lib-ld.m4 b/Build/source/utils/xz-4.999.9beta/m4/lib-ld.m4
index 96c4e2c3396..96c4e2c3396 100644
--- a/Build/source/utils/xz-4.999.8beta/m4/lib-ld.m4
+++ b/Build/source/utils/xz-4.999.9beta/m4/lib-ld.m4
diff --git a/Build/source/utils/xz-4.999.8beta/m4/lib-link.m4 b/Build/source/utils/xz-4.999.9beta/m4/lib-link.m4
index f95b7ba88d5..f95b7ba88d5 100644
--- a/Build/source/utils/xz-4.999.8beta/m4/lib-link.m4
+++ b/Build/source/utils/xz-4.999.9beta/m4/lib-link.m4
diff --git a/Build/source/utils/xz-4.999.8beta/m4/lib-prefix.m4 b/Build/source/utils/xz-4.999.9beta/m4/lib-prefix.m4
index a8684e17e3a..a8684e17e3a 100644
--- a/Build/source/utils/xz-4.999.8beta/m4/lib-prefix.m4
+++ b/Build/source/utils/xz-4.999.9beta/m4/lib-prefix.m4
diff --git a/Build/source/utils/xz-4.999.9beta/m4/libtool.m4 b/Build/source/utils/xz-4.999.9beta/m4/libtool.m4
new file mode 100644
index 00000000000..39ba996cb96
--- /dev/null
+++ b/Build/source/utils/xz-4.999.9beta/m4/libtool.m4
@@ -0,0 +1,7357 @@
+# libtool.m4 - Configure libtool for the host system. -*-Autoconf-*-
+#
+# Copyright (C) 1996, 1997, 1998, 1999, 2000, 2001, 2003, 2004, 2005,
+# 2006, 2007, 2008 Free Software Foundation, Inc.
+# Written by Gordon Matzigkeit, 1996
+#
+# This file is free software; the Free Software Foundation gives
+# unlimited permission to copy and/or distribute it, with or without
+# modifications, as long as this notice is preserved.
+
+m4_define([_LT_COPYING], [dnl
+# Copyright (C) 1996, 1997, 1998, 1999, 2000, 2001, 2003, 2004, 2005,
+# 2006, 2007, 2008 Free Software Foundation, Inc.
+# Written by Gordon Matzigkeit, 1996
+#
+# This file is part of GNU Libtool.
+#
+# GNU Libtool is free software; you can redistribute it and/or
+# modify it under the terms of the GNU General Public License as
+# published by the Free Software Foundation; either version 2 of
+# the License, or (at your option) any later version.
+#
+# As a special exception to the GNU General Public License,
+# if you distribute this file as part of a program or library that
+# is built using GNU Libtool, you may include this file under the
+# same distribution terms that you use for the rest of that program.
+#
+# GNU Libtool is distributed in the hope that it will be useful,
+# but WITHOUT ANY WARRANTY; without even the implied warranty of
+# MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+# GNU General Public License for more details.
+#
+# You should have received a copy of the GNU General Public License
+# along with GNU Libtool; see the file COPYING. If not, a copy
+# can be downloaded from http://www.gnu.org/licenses/gpl.html, or
+# obtained by writing to the Free Software Foundation, Inc.,
+# 51 Franklin Street, Fifth Floor, Boston, MA 02110-1301, USA.
+])
+
+# serial 56 LT_INIT
+
+
+# LT_PREREQ(VERSION)
+# ------------------
+# Complain and exit if this libtool version is less that VERSION.
+m4_defun([LT_PREREQ],
+[m4_if(m4_version_compare(m4_defn([LT_PACKAGE_VERSION]), [$1]), -1,
+ [m4_default([$3],
+ [m4_fatal([Libtool version $1 or higher is required],
+ 63)])],
+ [$2])])
+
+
+# _LT_CHECK_BUILDDIR
+# ------------------
+# Complain if the absolute build directory name contains unusual characters
+m4_defun([_LT_CHECK_BUILDDIR],
+[case `pwd` in
+ *\ * | *\ *)
+ AC_MSG_WARN([Libtool does not cope well with whitespace in `pwd`]) ;;
+esac
+])
+
+
+# LT_INIT([OPTIONS])
+# ------------------
+AC_DEFUN([LT_INIT],
+[AC_PREREQ([2.58])dnl We use AC_INCLUDES_DEFAULT
+AC_BEFORE([$0], [LT_LANG])dnl
+AC_BEFORE([$0], [LT_OUTPUT])dnl
+AC_BEFORE([$0], [LTDL_INIT])dnl
+m4_require([_LT_CHECK_BUILDDIR])dnl
+
+dnl Autoconf doesn't catch unexpanded LT_ macros by default:
+m4_pattern_forbid([^_?LT_[A-Z_]+$])dnl
+m4_pattern_allow([^(_LT_EOF|LT_DLGLOBAL|LT_DLLAZY_OR_NOW|LT_MULTI_MODULE)$])dnl
+dnl aclocal doesn't pull ltoptions.m4, ltsugar.m4, or ltversion.m4
+dnl unless we require an AC_DEFUNed macro:
+AC_REQUIRE([LTOPTIONS_VERSION])dnl
+AC_REQUIRE([LTSUGAR_VERSION])dnl
+AC_REQUIRE([LTVERSION_VERSION])dnl
+AC_REQUIRE([LTOBSOLETE_VERSION])dnl
+m4_require([_LT_PROG_LTMAIN])dnl
+
+dnl Parse OPTIONS
+_LT_SET_OPTIONS([$0], [$1])
+
+# This can be used to rebuild libtool when needed
+LIBTOOL_DEPS="$ltmain"
+
+# Always use our own libtool.
+LIBTOOL='$(SHELL) $(top_builddir)/libtool'
+AC_SUBST(LIBTOOL)dnl
+
+_LT_SETUP
+
+# Only expand once:
+m4_define([LT_INIT])
+])# LT_INIT
+
+# Old names:
+AU_ALIAS([AC_PROG_LIBTOOL], [LT_INIT])
+AU_ALIAS([AM_PROG_LIBTOOL], [LT_INIT])
+dnl aclocal-1.4 backwards compatibility:
+dnl AC_DEFUN([AC_PROG_LIBTOOL], [])
+dnl AC_DEFUN([AM_PROG_LIBTOOL], [])
+
+
+# _LT_CC_BASENAME(CC)
+# -------------------
+# Calculate cc_basename. Skip known compiler wrappers and cross-prefix.
+m4_defun([_LT_CC_BASENAME],
+[for cc_temp in $1""; do
+ case $cc_temp in
+ compile | *[[\\/]]compile | ccache | *[[\\/]]ccache ) ;;
+ distcc | *[[\\/]]distcc | purify | *[[\\/]]purify ) ;;
+ \-*) ;;
+ *) break;;
+ esac
+done
+cc_basename=`$ECHO "X$cc_temp" | $Xsed -e 's%.*/%%' -e "s%^$host_alias-%%"`
+])
+
+
+# _LT_FILEUTILS_DEFAULTS
+# ----------------------
+# It is okay to use these file commands and assume they have been set
+# sensibly after `m4_require([_LT_FILEUTILS_DEFAULTS])'.
+m4_defun([_LT_FILEUTILS_DEFAULTS],
+[: ${CP="cp -f"}
+: ${MV="mv -f"}
+: ${RM="rm -f"}
+])# _LT_FILEUTILS_DEFAULTS
+
+
+# _LT_SETUP
+# ---------
+m4_defun([_LT_SETUP],
+[AC_REQUIRE([AC_CANONICAL_HOST])dnl
+AC_REQUIRE([AC_CANONICAL_BUILD])dnl
+_LT_DECL([], [host_alias], [0], [The host system])dnl
+_LT_DECL([], [host], [0])dnl
+_LT_DECL([], [host_os], [0])dnl
+dnl
+_LT_DECL([], [build_alias], [0], [The build system])dnl
+_LT_DECL([], [build], [0])dnl
+_LT_DECL([], [build_os], [0])dnl
+dnl
+AC_REQUIRE([AC_PROG_CC])dnl
+AC_REQUIRE([LT_PATH_LD])dnl
+AC_REQUIRE([LT_PATH_NM])dnl
+dnl
+AC_REQUIRE([AC_PROG_LN_S])dnl
+test -z "$LN_S" && LN_S="ln -s"
+_LT_DECL([], [LN_S], [1], [Whether we need soft or hard links])dnl
+dnl
+AC_REQUIRE([LT_CMD_MAX_LEN])dnl
+_LT_DECL([objext], [ac_objext], [0], [Object file suffix (normally "o")])dnl
+_LT_DECL([], [exeext], [0], [Executable file suffix (normally "")])dnl
+dnl
+m4_require([_LT_FILEUTILS_DEFAULTS])dnl
+m4_require([_LT_CHECK_SHELL_FEATURES])dnl
+m4_require([_LT_CMD_RELOAD])dnl
+m4_require([_LT_CHECK_MAGIC_METHOD])dnl
+m4_require([_LT_CMD_OLD_ARCHIVE])dnl
+m4_require([_LT_CMD_GLOBAL_SYMBOLS])dnl
+
+_LT_CONFIG_LIBTOOL_INIT([
+# See if we are running on zsh, and set the options which allow our
+# commands through without removal of \ escapes INIT.
+if test -n "\${ZSH_VERSION+set}" ; then
+ setopt NO_GLOB_SUBST
+fi
+])
+if test -n "${ZSH_VERSION+set}" ; then
+ setopt NO_GLOB_SUBST
+fi
+
+_LT_CHECK_OBJDIR
+
+m4_require([_LT_TAG_COMPILER])dnl
+_LT_PROG_ECHO_BACKSLASH
+
+case $host_os in
+aix3*)
+ # AIX sometimes has problems with the GCC collect2 program. For some
+ # reason, if we set the COLLECT_NAMES environment variable, the problems
+ # vanish in a puff of smoke.
+ if test "X${COLLECT_NAMES+set}" != Xset; then
+ COLLECT_NAMES=
+ export COLLECT_NAMES
+ fi
+ ;;
+esac
+
+# Sed substitution that helps us do robust quoting. It backslashifies
+# metacharacters that are still active within double-quoted strings.
+sed_quote_subst='s/\([["`$\\]]\)/\\\1/g'
+
+# Same as above, but do not quote variable references.
+double_quote_subst='s/\([["`\\]]\)/\\\1/g'
+
+# Sed substitution to delay expansion of an escaped shell variable in a
+# double_quote_subst'ed string.
+delay_variable_subst='s/\\\\\\\\\\\$/\\\\\\$/g'
+
+# Sed substitution to delay expansion of an escaped single quote.
+delay_single_quote_subst='s/'\''/'\'\\\\\\\'\''/g'
+
+# Sed substitution to avoid accidental globbing in evaled expressions
+no_glob_subst='s/\*/\\\*/g'
+
+# Global variables:
+ofile=libtool
+can_build_shared=yes
+
+# All known linkers require a `.a' archive for static linking (except MSVC,
+# which needs '.lib').
+libext=a
+
+with_gnu_ld="$lt_cv_prog_gnu_ld"
+
+old_CC="$CC"
+old_CFLAGS="$CFLAGS"
+
+# Set sane defaults for various variables
+test -z "$CC" && CC=cc
+test -z "$LTCC" && LTCC=$CC
+test -z "$LTCFLAGS" && LTCFLAGS=$CFLAGS
+test -z "$LD" && LD=ld
+test -z "$ac_objext" && ac_objext=o
+
+_LT_CC_BASENAME([$compiler])
+
+# Only perform the check for file, if the check method requires it
+test -z "$MAGIC_CMD" && MAGIC_CMD=file
+case $deplibs_check_method in
+file_magic*)
+ if test "$file_magic_cmd" = '$MAGIC_CMD'; then
+ _LT_PATH_MAGIC
+ fi
+ ;;
+esac
+
+# Use C for the default configuration in the libtool script
+LT_SUPPORTED_TAG([CC])
+_LT_LANG_C_CONFIG
+_LT_LANG_DEFAULT_CONFIG
+_LT_CONFIG_COMMANDS
+])# _LT_SETUP
+
+
+# _LT_PROG_LTMAIN
+# ---------------
+# Note that this code is called both from `configure', and `config.status'
+# now that we use AC_CONFIG_COMMANDS to generate libtool. Notably,
+# `config.status' has no value for ac_aux_dir unless we are using Automake,
+# so we pass a copy along to make sure it has a sensible value anyway.
+m4_defun([_LT_PROG_LTMAIN],
+[m4_ifdef([AC_REQUIRE_AUX_FILE], [AC_REQUIRE_AUX_FILE([ltmain.sh])])dnl
+_LT_CONFIG_LIBTOOL_INIT([ac_aux_dir='$ac_aux_dir'])
+ltmain="$ac_aux_dir/ltmain.sh"
+])# _LT_PROG_LTMAIN
+
+
+## ------------------------------------- ##
+## Accumulate code for creating libtool. ##
+## ------------------------------------- ##
+
+# So that we can recreate a full libtool script including additional
+# tags, we accumulate the chunks of code to send to AC_CONFIG_COMMANDS
+# in macros and then make a single call at the end using the `libtool'
+# label.
+
+
+# _LT_CONFIG_LIBTOOL_INIT([INIT-COMMANDS])
+# ----------------------------------------
+# Register INIT-COMMANDS to be passed to AC_CONFIG_COMMANDS later.
+m4_define([_LT_CONFIG_LIBTOOL_INIT],
+[m4_ifval([$1],
+ [m4_append([_LT_OUTPUT_LIBTOOL_INIT],
+ [$1
+])])])
+
+# Initialize.
+m4_define([_LT_OUTPUT_LIBTOOL_INIT])
+
+
+# _LT_CONFIG_LIBTOOL([COMMANDS])
+# ------------------------------
+# Register COMMANDS to be passed to AC_CONFIG_COMMANDS later.
+m4_define([_LT_CONFIG_LIBTOOL],
+[m4_ifval([$1],
+ [m4_append([_LT_OUTPUT_LIBTOOL_COMMANDS],
+ [$1
+])])])
+
+# Initialize.
+m4_define([_LT_OUTPUT_LIBTOOL_COMMANDS])
+
+
+# _LT_CONFIG_SAVE_COMMANDS([COMMANDS], [INIT_COMMANDS])
+# -----------------------------------------------------
+m4_defun([_LT_CONFIG_SAVE_COMMANDS],
+[_LT_CONFIG_LIBTOOL([$1])
+_LT_CONFIG_LIBTOOL_INIT([$2])
+])
+
+
+# _LT_FORMAT_COMMENT([COMMENT])
+# -----------------------------
+# Add leading comment marks to the start of each line, and a trailing
+# full-stop to the whole comment if one is not present already.
+m4_define([_LT_FORMAT_COMMENT],
+[m4_ifval([$1], [
+m4_bpatsubst([m4_bpatsubst([$1], [^ *], [# ])],
+ [['`$\]], [\\\&])]m4_bmatch([$1], [[!?.]$], [], [.])
+)])
+
+
+
+## ------------------------ ##
+## FIXME: Eliminate VARNAME ##
+## ------------------------ ##
+
+
+# _LT_DECL([CONFIGNAME], VARNAME, VALUE, [DESCRIPTION], [IS-TAGGED?])
+# -------------------------------------------------------------------
+# CONFIGNAME is the name given to the value in the libtool script.
+# VARNAME is the (base) name used in the configure script.
+# VALUE may be 0, 1 or 2 for a computed quote escaped value based on
+# VARNAME. Any other value will be used directly.
+m4_define([_LT_DECL],
+[lt_if_append_uniq([lt_decl_varnames], [$2], [, ],
+ [lt_dict_add_subkey([lt_decl_dict], [$2], [libtool_name],
+ [m4_ifval([$1], [$1], [$2])])
+ lt_dict_add_subkey([lt_decl_dict], [$2], [value], [$3])
+ m4_ifval([$4],
+ [lt_dict_add_subkey([lt_decl_dict], [$2], [description], [$4])])
+ lt_dict_add_subkey([lt_decl_dict], [$2],
+ [tagged?], [m4_ifval([$5], [yes], [no])])])
+])
+
+
+# _LT_TAGDECL([CONFIGNAME], VARNAME, VALUE, [DESCRIPTION])
+# --------------------------------------------------------
+m4_define([_LT_TAGDECL], [_LT_DECL([$1], [$2], [$3], [$4], [yes])])
+
+
+# lt_decl_tag_varnames([SEPARATOR], [VARNAME1...])
+# ------------------------------------------------
+m4_define([lt_decl_tag_varnames],
+[_lt_decl_filter([tagged?], [yes], $@)])
+
+
+# _lt_decl_filter(SUBKEY, VALUE, [SEPARATOR], [VARNAME1..])
+# ---------------------------------------------------------
+m4_define([_lt_decl_filter],
+[m4_case([$#],
+ [0], [m4_fatal([$0: too few arguments: $#])],
+ [1], [m4_fatal([$0: too few arguments: $#: $1])],
+ [2], [lt_dict_filter([lt_decl_dict], [$1], [$2], [], lt_decl_varnames)],
+ [3], [lt_dict_filter([lt_decl_dict], [$1], [$2], [$3], lt_decl_varnames)],
+ [lt_dict_filter([lt_decl_dict], $@)])[]dnl
+])
+
+
+# lt_decl_quote_varnames([SEPARATOR], [VARNAME1...])
+# --------------------------------------------------
+m4_define([lt_decl_quote_varnames],
+[_lt_decl_filter([value], [1], $@)])
+
+
+# lt_decl_dquote_varnames([SEPARATOR], [VARNAME1...])
+# ---------------------------------------------------
+m4_define([lt_decl_dquote_varnames],
+[_lt_decl_filter([value], [2], $@)])
+
+
+# lt_decl_varnames_tagged([SEPARATOR], [VARNAME1...])
+# ---------------------------------------------------
+m4_define([lt_decl_varnames_tagged],
+[m4_assert([$# <= 2])dnl
+_$0(m4_quote(m4_default([$1], [[, ]])),
+ m4_ifval([$2], [[$2]], [m4_dquote(lt_decl_tag_varnames)]),
+ m4_split(m4_normalize(m4_quote(_LT_TAGS)), [ ]))])
+m4_define([_lt_decl_varnames_tagged],
+[m4_ifval([$3], [lt_combine([$1], [$2], [_], $3)])])
+
+
+# lt_decl_all_varnames([SEPARATOR], [VARNAME1...])
+# ------------------------------------------------
+m4_define([lt_decl_all_varnames],
+[_$0(m4_quote(m4_default([$1], [[, ]])),
+ m4_if([$2], [],
+ m4_quote(lt_decl_varnames),
+ m4_quote(m4_shift($@))))[]dnl
+])
+m4_define([_lt_decl_all_varnames],
+[lt_join($@, lt_decl_varnames_tagged([$1],
+ lt_decl_tag_varnames([[, ]], m4_shift($@))))dnl
+])
+
+
+# _LT_CONFIG_STATUS_DECLARE([VARNAME])
+# ------------------------------------
+# Quote a variable value, and forward it to `config.status' so that its
+# declaration there will have the same value as in `configure'. VARNAME
+# must have a single quote delimited value for this to work.
+m4_define([_LT_CONFIG_STATUS_DECLARE],
+[$1='`$ECHO "X$][$1" | $Xsed -e "$delay_single_quote_subst"`'])
+
+
+# _LT_CONFIG_STATUS_DECLARATIONS
+# ------------------------------
+# We delimit libtool config variables with single quotes, so when
+# we write them to config.status, we have to be sure to quote all
+# embedded single quotes properly. In configure, this macro expands
+# each variable declared with _LT_DECL (and _LT_TAGDECL) into:
+#
+# <var>='`$ECHO "X$<var>" | $Xsed -e "$delay_single_quote_subst"`'
+m4_defun([_LT_CONFIG_STATUS_DECLARATIONS],
+[m4_foreach([_lt_var], m4_quote(lt_decl_all_varnames),
+ [m4_n([_LT_CONFIG_STATUS_DECLARE(_lt_var)])])])
+
+
+# _LT_LIBTOOL_TAGS
+# ----------------
+# Output comment and list of tags supported by the script
+m4_defun([_LT_LIBTOOL_TAGS],
+[_LT_FORMAT_COMMENT([The names of the tagged configurations supported by this script])dnl
+available_tags="_LT_TAGS"dnl
+])
+
+
+# _LT_LIBTOOL_DECLARE(VARNAME, [TAG])
+# -----------------------------------
+# Extract the dictionary values for VARNAME (optionally with TAG) and
+# expand to a commented shell variable setting:
+#
+# # Some comment about what VAR is for.
+# visible_name=$lt_internal_name
+m4_define([_LT_LIBTOOL_DECLARE],
+[_LT_FORMAT_COMMENT(m4_quote(lt_dict_fetch([lt_decl_dict], [$1],
+ [description])))[]dnl
+m4_pushdef([_libtool_name],
+ m4_quote(lt_dict_fetch([lt_decl_dict], [$1], [libtool_name])))[]dnl
+m4_case(m4_quote(lt_dict_fetch([lt_decl_dict], [$1], [value])),
+ [0], [_libtool_name=[$]$1],
+ [1], [_libtool_name=$lt_[]$1],
+ [2], [_libtool_name=$lt_[]$1],
+ [_libtool_name=lt_dict_fetch([lt_decl_dict], [$1], [value])])[]dnl
+m4_ifval([$2], [_$2])[]m4_popdef([_libtool_name])[]dnl
+])
+
+
+# _LT_LIBTOOL_CONFIG_VARS
+# -----------------------
+# Produce commented declarations of non-tagged libtool config variables
+# suitable for insertion in the LIBTOOL CONFIG section of the `libtool'
+# script. Tagged libtool config variables (even for the LIBTOOL CONFIG
+# section) are produced by _LT_LIBTOOL_TAG_VARS.
+m4_defun([_LT_LIBTOOL_CONFIG_VARS],
+[m4_foreach([_lt_var],
+ m4_quote(_lt_decl_filter([tagged?], [no], [], lt_decl_varnames)),
+ [m4_n([_LT_LIBTOOL_DECLARE(_lt_var)])])])
+
+
+# _LT_LIBTOOL_TAG_VARS(TAG)
+# -------------------------
+m4_define([_LT_LIBTOOL_TAG_VARS],
+[m4_foreach([_lt_var], m4_quote(lt_decl_tag_varnames),
+ [m4_n([_LT_LIBTOOL_DECLARE(_lt_var, [$1])])])])
+
+
+# _LT_TAGVAR(VARNAME, [TAGNAME])
+# ------------------------------
+m4_define([_LT_TAGVAR], [m4_ifval([$2], [$1_$2], [$1])])
+
+
+# _LT_CONFIG_COMMANDS
+# -------------------
+# Send accumulated output to $CONFIG_STATUS. Thanks to the lists of
+# variables for single and double quote escaping we saved from calls
+# to _LT_DECL, we can put quote escaped variables declarations
+# into `config.status', and then the shell code to quote escape them in
+# for loops in `config.status'. Finally, any additional code accumulated
+# from calls to _LT_CONFIG_LIBTOOL_INIT is expanded.
+m4_defun([_LT_CONFIG_COMMANDS],
+[AC_PROVIDE_IFELSE([LT_OUTPUT],
+ dnl If the libtool generation code has been placed in $CONFIG_LT,
+ dnl instead of duplicating it all over again into config.status,
+ dnl then we will have config.status run $CONFIG_LT later, so it
+ dnl needs to know what name is stored there:
+ [AC_CONFIG_COMMANDS([libtool],
+ [$SHELL $CONFIG_LT || AS_EXIT(1)], [CONFIG_LT='$CONFIG_LT'])],
+ dnl If the libtool generation code is destined for config.status,
+ dnl expand the accumulated commands and init code now:
+ [AC_CONFIG_COMMANDS([libtool],
+ [_LT_OUTPUT_LIBTOOL_COMMANDS], [_LT_OUTPUT_LIBTOOL_COMMANDS_INIT])])
+])#_LT_CONFIG_COMMANDS
+
+
+# Initialize.
+m4_define([_LT_OUTPUT_LIBTOOL_COMMANDS_INIT],
+[
+
+# The HP-UX ksh and POSIX shell print the target directory to stdout
+# if CDPATH is set.
+(unset CDPATH) >/dev/null 2>&1 && unset CDPATH
+
+sed_quote_subst='$sed_quote_subst'
+double_quote_subst='$double_quote_subst'
+delay_variable_subst='$delay_variable_subst'
+_LT_CONFIG_STATUS_DECLARATIONS
+LTCC='$LTCC'
+LTCFLAGS='$LTCFLAGS'
+compiler='$compiler_DEFAULT'
+
+# Quote evaled strings.
+for var in lt_decl_all_varnames([[ \
+]], lt_decl_quote_varnames); do
+ case \`eval \\\\\$ECHO "X\\\\\$\$var"\` in
+ *[[\\\\\\\`\\"\\\$]]*)
+ eval "lt_\$var=\\\\\\"\\\`\\\$ECHO \\"X\\\$\$var\\" | \\\$Xsed -e \\"\\\$sed_quote_subst\\"\\\`\\\\\\""
+ ;;
+ *)
+ eval "lt_\$var=\\\\\\"\\\$\$var\\\\\\""
+ ;;
+ esac
+done
+
+# Double-quote double-evaled strings.
+for var in lt_decl_all_varnames([[ \
+]], lt_decl_dquote_varnames); do
+ case \`eval \\\\\$ECHO "X\\\\\$\$var"\` in
+ *[[\\\\\\\`\\"\\\$]]*)
+ eval "lt_\$var=\\\\\\"\\\`\\\$ECHO \\"X\\\$\$var\\" | \\\$Xsed -e \\"\\\$double_quote_subst\\" -e \\"\\\$sed_quote_subst\\" -e \\"\\\$delay_variable_subst\\"\\\`\\\\\\""
+ ;;
+ *)
+ eval "lt_\$var=\\\\\\"\\\$\$var\\\\\\""
+ ;;
+ esac
+done
+
+# Fix-up fallback echo if it was mangled by the above quoting rules.
+case \$lt_ECHO in
+*'\\\[$]0 --fallback-echo"')dnl "
+ lt_ECHO=\`\$ECHO "X\$lt_ECHO" | \$Xsed -e 's/\\\\\\\\\\\\\\\[$]0 --fallback-echo"\[$]/\[$]0 --fallback-echo"/'\`
+ ;;
+esac
+
+_LT_OUTPUT_LIBTOOL_INIT
+])
+
+
+# LT_OUTPUT
+# ---------
+# This macro allows early generation of the libtool script (before
+# AC_OUTPUT is called), incase it is used in configure for compilation
+# tests.
+AC_DEFUN([LT_OUTPUT],
+[: ${CONFIG_LT=./config.lt}
+AC_MSG_NOTICE([creating $CONFIG_LT])
+cat >"$CONFIG_LT" <<_LTEOF
+#! $SHELL
+# Generated by $as_me.
+# Run this file to recreate a libtool stub with the current configuration.
+
+lt_cl_silent=false
+SHELL=\${CONFIG_SHELL-$SHELL}
+_LTEOF
+
+cat >>"$CONFIG_LT" <<\_LTEOF
+AS_SHELL_SANITIZE
+_AS_PREPARE
+
+exec AS_MESSAGE_FD>&1
+exec AS_MESSAGE_LOG_FD>>config.log
+{
+ echo
+ AS_BOX([Running $as_me.])
+} >&AS_MESSAGE_LOG_FD
+
+lt_cl_help="\
+\`$as_me' creates a local libtool stub from the current configuration,
+for use in further configure time tests before the real libtool is
+generated.
+
+Usage: $[0] [[OPTIONS]]
+
+ -h, --help print this help, then exit
+ -V, --version print version number, then exit
+ -q, --quiet do not print progress messages
+ -d, --debug don't remove temporary files
+
+Report bugs to <bug-libtool@gnu.org>."
+
+lt_cl_version="\
+m4_ifset([AC_PACKAGE_NAME], [AC_PACKAGE_NAME ])config.lt[]dnl
+m4_ifset([AC_PACKAGE_VERSION], [ AC_PACKAGE_VERSION])
+configured by $[0], generated by m4_PACKAGE_STRING.
+
+Copyright (C) 2008 Free Software Foundation, Inc.
+This config.lt script is free software; the Free Software Foundation
+gives unlimited permision to copy, distribute and modify it."
+
+while test $[#] != 0
+do
+ case $[1] in
+ --version | --v* | -V )
+ echo "$lt_cl_version"; exit 0 ;;
+ --help | --h* | -h )
+ echo "$lt_cl_help"; exit 0 ;;
+ --debug | --d* | -d )
+ debug=: ;;
+ --quiet | --q* | --silent | --s* | -q )
+ lt_cl_silent=: ;;
+
+ -*) AC_MSG_ERROR([unrecognized option: $[1]
+Try \`$[0] --help' for more information.]) ;;
+
+ *) AC_MSG_ERROR([unrecognized argument: $[1]
+Try \`$[0] --help' for more information.]) ;;
+ esac
+ shift
+done
+
+if $lt_cl_silent; then
+ exec AS_MESSAGE_FD>/dev/null
+fi
+_LTEOF
+
+cat >>"$CONFIG_LT" <<_LTEOF
+_LT_OUTPUT_LIBTOOL_COMMANDS_INIT
+_LTEOF
+
+cat >>"$CONFIG_LT" <<\_LTEOF
+AC_MSG_NOTICE([creating $ofile])
+_LT_OUTPUT_LIBTOOL_COMMANDS
+AS_EXIT(0)
+_LTEOF
+chmod +x "$CONFIG_LT"
+
+# configure is writing to config.log, but config.lt does its own redirection,
+# appending to config.log, which fails on DOS, as config.log is still kept
+# open by configure. Here we exec the FD to /dev/null, effectively closing
+# config.log, so it can be properly (re)opened and appended to by config.lt.
+if test "$no_create" != yes; then
+ lt_cl_success=:
+ test "$silent" = yes &&
+ lt_config_lt_args="$lt_config_lt_args --quiet"
+ exec AS_MESSAGE_LOG_FD>/dev/null
+ $SHELL "$CONFIG_LT" $lt_config_lt_args || lt_cl_success=false
+ exec AS_MESSAGE_LOG_FD>>config.log
+ $lt_cl_success || AS_EXIT(1)
+fi
+])# LT_OUTPUT
+
+
+# _LT_CONFIG(TAG)
+# ---------------
+# If TAG is the built-in tag, create an initial libtool script with a
+# default configuration from the untagged config vars. Otherwise add code
+# to config.status for appending the configuration named by TAG from the
+# matching tagged config vars.
+m4_defun([_LT_CONFIG],
+[m4_require([_LT_FILEUTILS_DEFAULTS])dnl
+_LT_CONFIG_SAVE_COMMANDS([
+ m4_define([_LT_TAG], m4_if([$1], [], [C], [$1]))dnl
+ m4_if(_LT_TAG, [C], [
+ # See if we are running on zsh, and set the options which allow our
+ # commands through without removal of \ escapes.
+ if test -n "${ZSH_VERSION+set}" ; then
+ setopt NO_GLOB_SUBST
+ fi
+
+ cfgfile="${ofile}T"
+ trap "$RM \"$cfgfile\"; exit 1" 1 2 15
+ $RM "$cfgfile"
+
+ cat <<_LT_EOF >> "$cfgfile"
+#! $SHELL
+
+# `$ECHO "$ofile" | sed 's%^.*/%%'` - Provide generalized library-building support services.
+# Generated automatically by $as_me ($PACKAGE$TIMESTAMP) $VERSION
+# Libtool was configured on host `(hostname || uname -n) 2>/dev/null | sed 1q`:
+# NOTE: Changes made to this file will be lost: look at ltmain.sh.
+#
+_LT_COPYING
+_LT_LIBTOOL_TAGS
+
+# ### BEGIN LIBTOOL CONFIG
+_LT_LIBTOOL_CONFIG_VARS
+_LT_LIBTOOL_TAG_VARS
+# ### END LIBTOOL CONFIG
+
+_LT_EOF
+
+ case $host_os in
+ aix3*)
+ cat <<\_LT_EOF >> "$cfgfile"
+# AIX sometimes has problems with the GCC collect2 program. For some
+# reason, if we set the COLLECT_NAMES environment variable, the problems
+# vanish in a puff of smoke.
+if test "X${COLLECT_NAMES+set}" != Xset; then
+ COLLECT_NAMES=
+ export COLLECT_NAMES
+fi
+_LT_EOF
+ ;;
+ esac
+
+ _LT_PROG_LTMAIN
+
+ # We use sed instead of cat because bash on DJGPP gets confused if
+ # if finds mixed CR/LF and LF-only lines. Since sed operates in
+ # text mode, it properly converts lines to CR/LF. This bash problem
+ # is reportedly fixed, but why not run on old versions too?
+ sed '/^# Generated shell functions inserted here/q' "$ltmain" >> "$cfgfile" \
+ || (rm -f "$cfgfile"; exit 1)
+
+ _LT_PROG_XSI_SHELLFNS
+
+ sed -n '/^# Generated shell functions inserted here/,$p' "$ltmain" >> "$cfgfile" \
+ || (rm -f "$cfgfile"; exit 1)
+
+ mv -f "$cfgfile" "$ofile" ||
+ (rm -f "$ofile" && cp "$cfgfile" "$ofile" && rm -f "$cfgfile")
+ chmod +x "$ofile"
+],
+[cat <<_LT_EOF >> "$ofile"
+
+dnl Unfortunately we have to use $1 here, since _LT_TAG is not expanded
+dnl in a comment (ie after a #).
+# ### BEGIN LIBTOOL TAG CONFIG: $1
+_LT_LIBTOOL_TAG_VARS(_LT_TAG)
+# ### END LIBTOOL TAG CONFIG: $1
+_LT_EOF
+])dnl /m4_if
+],
+[m4_if([$1], [], [
+ PACKAGE='$PACKAGE'
+ VERSION='$VERSION'
+ TIMESTAMP='$TIMESTAMP'
+ RM='$RM'
+ ofile='$ofile'], [])
+])dnl /_LT_CONFIG_SAVE_COMMANDS
+])# _LT_CONFIG
+
+
+# LT_SUPPORTED_TAG(TAG)
+# ---------------------
+# Trace this macro to discover what tags are supported by the libtool
+# --tag option, using:
+# autoconf --trace 'LT_SUPPORTED_TAG:$1'
+AC_DEFUN([LT_SUPPORTED_TAG], [])
+
+
+# C support is built-in for now
+m4_define([_LT_LANG_C_enabled], [])
+m4_define([_LT_TAGS], [])
+
+
+# LT_LANG(LANG)
+# -------------
+# Enable libtool support for the given language if not already enabled.
+AC_DEFUN([LT_LANG],
+[AC_BEFORE([$0], [LT_OUTPUT])dnl
+m4_case([$1],
+ [C], [_LT_LANG(C)],
+ [C++], [_LT_LANG(CXX)],
+ [Java], [_LT_LANG(GCJ)],
+ [Fortran 77], [_LT_LANG(F77)],
+ [Fortran], [_LT_LANG(FC)],
+ [Windows Resource], [_LT_LANG(RC)],
+ [m4_ifdef([_LT_LANG_]$1[_CONFIG],
+ [_LT_LANG($1)],
+ [m4_fatal([$0: unsupported language: "$1"])])])dnl
+])# LT_LANG
+
+
+# _LT_LANG(LANGNAME)
+# ------------------
+m4_defun([_LT_LANG],
+[m4_ifdef([_LT_LANG_]$1[_enabled], [],
+ [LT_SUPPORTED_TAG([$1])dnl
+ m4_append([_LT_TAGS], [$1 ])dnl
+ m4_define([_LT_LANG_]$1[_enabled], [])dnl
+ _LT_LANG_$1_CONFIG($1)])dnl
+])# _LT_LANG
+
+
+# _LT_LANG_DEFAULT_CONFIG
+# -----------------------
+m4_defun([_LT_LANG_DEFAULT_CONFIG],
+[AC_PROVIDE_IFELSE([AC_PROG_CXX],
+ [LT_LANG(CXX)],
+ [m4_define([AC_PROG_CXX], defn([AC_PROG_CXX])[LT_LANG(CXX)])])
+
+AC_PROVIDE_IFELSE([AC_PROG_F77],
+ [LT_LANG(F77)],
+ [m4_define([AC_PROG_F77], defn([AC_PROG_F77])[LT_LANG(F77)])])
+
+AC_PROVIDE_IFELSE([AC_PROG_FC],
+ [LT_LANG(FC)],
+ [m4_define([AC_PROG_FC], defn([AC_PROG_FC])[LT_LANG(FC)])])
+
+dnl The call to [A][M_PROG_GCJ] is quoted like that to stop aclocal
+dnl pulling things in needlessly.
+AC_PROVIDE_IFELSE([AC_PROG_GCJ],
+ [LT_LANG(GCJ)],
+ [AC_PROVIDE_IFELSE([A][M_PROG_GCJ],
+ [LT_LANG(GCJ)],
+ [AC_PROVIDE_IFELSE([LT_PROG_GCJ],
+ [LT_LANG(GCJ)],
+ [m4_ifdef([AC_PROG_GCJ],
+ [m4_define([AC_PROG_GCJ], defn([AC_PROG_GCJ])[LT_LANG(GCJ)])])
+ m4_ifdef([A][M_PROG_GCJ],
+ [m4_define([A][M_PROG_GCJ], defn([A][M_PROG_GCJ])[LT_LANG(GCJ)])])
+ m4_ifdef([LT_PROG_GCJ],
+ [m4_define([LT_PROG_GCJ], defn([LT_PROG_GCJ])[LT_LANG(GCJ)])])])])])
+
+AC_PROVIDE_IFELSE([LT_PROG_RC],
+ [LT_LANG(RC)],
+ [m4_define([LT_PROG_RC], defn([LT_PROG_RC])[LT_LANG(RC)])])
+])# _LT_LANG_DEFAULT_CONFIG
+
+# Obsolete macros:
+AU_DEFUN([AC_LIBTOOL_CXX], [LT_LANG(C++)])
+AU_DEFUN([AC_LIBTOOL_F77], [LT_LANG(Fortran 77)])
+AU_DEFUN([AC_LIBTOOL_FC], [LT_LANG(Fortran)])
+AU_DEFUN([AC_LIBTOOL_GCJ], [LT_LANG(Java)])
+dnl aclocal-1.4 backwards compatibility:
+dnl AC_DEFUN([AC_LIBTOOL_CXX], [])
+dnl AC_DEFUN([AC_LIBTOOL_F77], [])
+dnl AC_DEFUN([AC_LIBTOOL_FC], [])
+dnl AC_DEFUN([AC_LIBTOOL_GCJ], [])
+
+
+# _LT_TAG_COMPILER
+# ----------------
+m4_defun([_LT_TAG_COMPILER],
+[AC_REQUIRE([AC_PROG_CC])dnl
+
+_LT_DECL([LTCC], [CC], [1], [A C compiler])dnl
+_LT_DECL([LTCFLAGS], [CFLAGS], [1], [LTCC compiler flags])dnl
+_LT_TAGDECL([CC], [compiler], [1], [A language specific compiler])dnl
+_LT_TAGDECL([with_gcc], [GCC], [0], [Is the compiler the GNU compiler?])dnl
+
+# If no C compiler was specified, use CC.
+LTCC=${LTCC-"$CC"}
+
+# If no C compiler flags were specified, use CFLAGS.
+LTCFLAGS=${LTCFLAGS-"$CFLAGS"}
+
+# Allow CC to be a program name with arguments.
+compiler=$CC
+])# _LT_TAG_COMPILER
+
+
+# _LT_COMPILER_BOILERPLATE
+# ------------------------
+# Check for compiler boilerplate output or warnings with
+# the simple compiler test code.
+m4_defun([_LT_COMPILER_BOILERPLATE],
+[m4_require([_LT_DECL_SED])dnl
+ac_outfile=conftest.$ac_objext
+echo "$lt_simple_compile_test_code" >conftest.$ac_ext
+eval "$ac_compile" 2>&1 >/dev/null | $SED '/^$/d; /^ *+/d' >conftest.err
+_lt_compiler_boilerplate=`cat conftest.err`
+$RM conftest*
+])# _LT_COMPILER_BOILERPLATE
+
+
+# _LT_LINKER_BOILERPLATE
+# ----------------------
+# Check for linker boilerplate output or warnings with
+# the simple link test code.
+m4_defun([_LT_LINKER_BOILERPLATE],
+[m4_require([_LT_DECL_SED])dnl
+ac_outfile=conftest.$ac_objext
+echo "$lt_simple_link_test_code" >conftest.$ac_ext
+eval "$ac_link" 2>&1 >/dev/null | $SED '/^$/d; /^ *+/d' >conftest.err
+_lt_linker_boilerplate=`cat conftest.err`
+$RM -r conftest*
+])# _LT_LINKER_BOILERPLATE
+
+# _LT_REQUIRED_DARWIN_CHECKS
+# -------------------------
+m4_defun_once([_LT_REQUIRED_DARWIN_CHECKS],[
+ case $host_os in
+ rhapsody* | darwin*)
+ AC_CHECK_TOOL([DSYMUTIL], [dsymutil], [:])
+ AC_CHECK_TOOL([NMEDIT], [nmedit], [:])
+ AC_CHECK_TOOL([LIPO], [lipo], [:])
+ AC_CHECK_TOOL([OTOOL], [otool], [:])
+ AC_CHECK_TOOL([OTOOL64], [otool64], [:])
+ _LT_DECL([], [DSYMUTIL], [1],
+ [Tool to manipulate archived DWARF debug symbol files on Mac OS X])
+ _LT_DECL([], [NMEDIT], [1],
+ [Tool to change global to local symbols on Mac OS X])
+ _LT_DECL([], [LIPO], [1],
+ [Tool to manipulate fat objects and archives on Mac OS X])
+ _LT_DECL([], [OTOOL], [1],
+ [ldd/readelf like tool for Mach-O binaries on Mac OS X])
+ _LT_DECL([], [OTOOL64], [1],
+ [ldd/readelf like tool for 64 bit Mach-O binaries on Mac OS X 10.4])
+
+ AC_CACHE_CHECK([for -single_module linker flag],[lt_cv_apple_cc_single_mod],
+ [lt_cv_apple_cc_single_mod=no
+ if test -z "${LT_MULTI_MODULE}"; then
+ # By default we will add the -single_module flag. You can override
+ # by either setting the environment variable LT_MULTI_MODULE
+ # non-empty at configure time, or by adding -multi_module to the
+ # link flags.
+ rm -rf libconftest.dylib*
+ echo "int foo(void){return 1;}" > conftest.c
+ echo "$LTCC $LTCFLAGS $LDFLAGS -o libconftest.dylib \
+-dynamiclib -Wl,-single_module conftest.c" >&AS_MESSAGE_LOG_FD
+ $LTCC $LTCFLAGS $LDFLAGS -o libconftest.dylib \
+ -dynamiclib -Wl,-single_module conftest.c 2>conftest.err
+ _lt_result=$?
+ if test -f libconftest.dylib && test ! -s conftest.err && test $_lt_result = 0; then
+ lt_cv_apple_cc_single_mod=yes
+ else
+ cat conftest.err >&AS_MESSAGE_LOG_FD
+ fi
+ rm -rf libconftest.dylib*
+ rm -f conftest.*
+ fi])
+ AC_CACHE_CHECK([for -exported_symbols_list linker flag],
+ [lt_cv_ld_exported_symbols_list],
+ [lt_cv_ld_exported_symbols_list=no
+ save_LDFLAGS=$LDFLAGS
+ echo "_main" > conftest.sym
+ LDFLAGS="$LDFLAGS -Wl,-exported_symbols_list,conftest.sym"
+ AC_LINK_IFELSE([AC_LANG_PROGRAM([],[])],
+ [lt_cv_ld_exported_symbols_list=yes],
+ [lt_cv_ld_exported_symbols_list=no])
+ LDFLAGS="$save_LDFLAGS"
+ ])
+ case $host_os in
+ rhapsody* | darwin1.[[012]])
+ _lt_dar_allow_undefined='${wl}-undefined ${wl}suppress' ;;
+ darwin1.*)
+ _lt_dar_allow_undefined='${wl}-flat_namespace ${wl}-undefined ${wl}suppress' ;;
+ darwin*) # darwin 5.x on
+ # if running on 10.5 or later, the deployment target defaults
+ # to the OS version, if on x86, and 10.4, the deployment
+ # target defaults to 10.4. Don't you love it?
+ case ${MACOSX_DEPLOYMENT_TARGET-10.0},$host in
+ 10.0,*86*-darwin8*|10.0,*-darwin[[91]]*)
+ _lt_dar_allow_undefined='${wl}-undefined ${wl}dynamic_lookup' ;;
+ 10.[[012]]*)
+ _lt_dar_allow_undefined='${wl}-flat_namespace ${wl}-undefined ${wl}suppress' ;;
+ 10.*)
+ _lt_dar_allow_undefined='${wl}-undefined ${wl}dynamic_lookup' ;;
+ esac
+ ;;
+ esac
+ if test "$lt_cv_apple_cc_single_mod" = "yes"; then
+ _lt_dar_single_mod='$single_module'
+ fi
+ if test "$lt_cv_ld_exported_symbols_list" = "yes"; then
+ _lt_dar_export_syms=' ${wl}-exported_symbols_list,$output_objdir/${libname}-symbols.expsym'
+ else
+ _lt_dar_export_syms='~$NMEDIT -s $output_objdir/${libname}-symbols.expsym ${lib}'
+ fi
+ if test "$DSYMUTIL" != ":"; then
+ _lt_dsymutil='~$DSYMUTIL $lib || :'
+ else
+ _lt_dsymutil=
+ fi
+ ;;
+ esac
+])
+
+
+# _LT_DARWIN_LINKER_FEATURES
+# --------------------------
+# Checks for linker and compiler features on darwin
+m4_defun([_LT_DARWIN_LINKER_FEATURES],
+[
+ m4_require([_LT_REQUIRED_DARWIN_CHECKS])
+ _LT_TAGVAR(archive_cmds_need_lc, $1)=no
+ _LT_TAGVAR(hardcode_direct, $1)=no
+ _LT_TAGVAR(hardcode_automatic, $1)=yes
+ _LT_TAGVAR(hardcode_shlibpath_var, $1)=unsupported
+ _LT_TAGVAR(whole_archive_flag_spec, $1)=''
+ _LT_TAGVAR(link_all_deplibs, $1)=yes
+ _LT_TAGVAR(allow_undefined_flag, $1)="$_lt_dar_allow_undefined"
+ case $cc_basename in
+ ifort*) _lt_dar_can_shared=yes ;;
+ *) _lt_dar_can_shared=$GCC ;;
+ esac
+ if test "$_lt_dar_can_shared" = "yes"; then
+ output_verbose_link_cmd=echo
+ _LT_TAGVAR(archive_cmds, $1)="\$CC -dynamiclib \$allow_undefined_flag -o \$lib \$libobjs \$deplibs \$compiler_flags -install_name \$rpath/\$soname \$verstring $_lt_dar_single_mod${_lt_dsymutil}"
+ _LT_TAGVAR(module_cmds, $1)="\$CC \$allow_undefined_flag -o \$lib -bundle \$libobjs \$deplibs \$compiler_flags${_lt_dsymutil}"
+ _LT_TAGVAR(archive_expsym_cmds, $1)="sed 's,^,_,' < \$export_symbols > \$output_objdir/\${libname}-symbols.expsym~\$CC -dynamiclib \$allow_undefined_flag -o \$lib \$libobjs \$deplibs \$compiler_flags -install_name \$rpath/\$soname \$verstring ${_lt_dar_single_mod}${_lt_dar_export_syms}${_lt_dsymutil}"
+ _LT_TAGVAR(module_expsym_cmds, $1)="sed -e 's,^,_,' < \$export_symbols > \$output_objdir/\${libname}-symbols.expsym~\$CC \$allow_undefined_flag -o \$lib -bundle \$libobjs \$deplibs \$compiler_flags${_lt_dar_export_syms}${_lt_dsymutil}"
+ m4_if([$1], [CXX],
+[ if test "$lt_cv_apple_cc_single_mod" != "yes"; then
+ _LT_TAGVAR(archive_cmds, $1)="\$CC -r -keep_private_externs -nostdlib -o \${lib}-master.o \$libobjs~\$CC -dynamiclib \$allow_undefined_flag -o \$lib \${lib}-master.o \$deplibs \$compiler_flags -install_name \$rpath/\$soname \$verstring${_lt_dsymutil}"
+ _LT_TAGVAR(archive_expsym_cmds, $1)="sed 's,^,_,' < \$export_symbols > \$output_objdir/\${libname}-symbols.expsym~\$CC -r -keep_private_externs -nostdlib -o \${lib}-master.o \$libobjs~\$CC -dynamiclib \$allow_undefined_flag -o \$lib \${lib}-master.o \$deplibs \$compiler_flags -install_name \$rpath/\$soname \$verstring${_lt_dar_export_syms}${_lt_dsymutil}"
+ fi
+],[])
+ else
+ _LT_TAGVAR(ld_shlibs, $1)=no
+ fi
+])
+
+# _LT_SYS_MODULE_PATH_AIX
+# -----------------------
+# Links a minimal program and checks the executable
+# for the system default hardcoded library path. In most cases,
+# this is /usr/lib:/lib, but when the MPI compilers are used
+# the location of the communication and MPI libs are included too.
+# If we don't find anything, use the default library path according
+# to the aix ld manual.
+m4_defun([_LT_SYS_MODULE_PATH_AIX],
+[m4_require([_LT_DECL_SED])dnl
+AC_LINK_IFELSE(AC_LANG_PROGRAM,[
+lt_aix_libpath_sed='
+ /Import File Strings/,/^$/ {
+ /^0/ {
+ s/^0 *\(.*\)$/\1/
+ p
+ }
+ }'
+aix_libpath=`dump -H conftest$ac_exeext 2>/dev/null | $SED -n -e "$lt_aix_libpath_sed"`
+# Check for a 64-bit object if we didn't find anything.
+if test -z "$aix_libpath"; then
+ aix_libpath=`dump -HX64 conftest$ac_exeext 2>/dev/null | $SED -n -e "$lt_aix_libpath_sed"`
+fi],[])
+if test -z "$aix_libpath"; then aix_libpath="/usr/lib:/lib"; fi
+])# _LT_SYS_MODULE_PATH_AIX
+
+
+# _LT_SHELL_INIT(ARG)
+# -------------------
+m4_define([_LT_SHELL_INIT],
+[ifdef([AC_DIVERSION_NOTICE],
+ [AC_DIVERT_PUSH(AC_DIVERSION_NOTICE)],
+ [AC_DIVERT_PUSH(NOTICE)])
+$1
+AC_DIVERT_POP
+])# _LT_SHELL_INIT
+
+
+# _LT_PROG_ECHO_BACKSLASH
+# -----------------------
+# Add some code to the start of the generated configure script which
+# will find an echo command which doesn't interpret backslashes.
+m4_defun([_LT_PROG_ECHO_BACKSLASH],
+[_LT_SHELL_INIT([
+# Check that we are running under the correct shell.
+SHELL=${CONFIG_SHELL-/bin/sh}
+
+case X$lt_ECHO in
+X*--fallback-echo)
+ # Remove one level of quotation (which was required for Make).
+ ECHO=`echo "$lt_ECHO" | sed 's,\\\\\[$]\\[$]0,'[$]0','`
+ ;;
+esac
+
+ECHO=${lt_ECHO-echo}
+if test "X[$]1" = X--no-reexec; then
+ # Discard the --no-reexec flag, and continue.
+ shift
+elif test "X[$]1" = X--fallback-echo; then
+ # Avoid inline document here, it may be left over
+ :
+elif test "X`{ $ECHO '\t'; } 2>/dev/null`" = 'X\t' ; then
+ # Yippee, $ECHO works!
+ :
+else
+ # Restart under the correct shell.
+ exec $SHELL "[$]0" --no-reexec ${1+"[$]@"}
+fi
+
+if test "X[$]1" = X--fallback-echo; then
+ # used as fallback echo
+ shift
+ cat <<_LT_EOF
+[$]*
+_LT_EOF
+ exit 0
+fi
+
+# The HP-UX ksh and POSIX shell print the target directory to stdout
+# if CDPATH is set.
+(unset CDPATH) >/dev/null 2>&1 && unset CDPATH
+
+if test -z "$lt_ECHO"; then
+ if test "X${echo_test_string+set}" != Xset; then
+ # find a string as large as possible, as long as the shell can cope with it
+ for cmd in 'sed 50q "[$]0"' 'sed 20q "[$]0"' 'sed 10q "[$]0"' 'sed 2q "[$]0"' 'echo test'; do
+ # expected sizes: less than 2Kb, 1Kb, 512 bytes, 16 bytes, ...
+ if { echo_test_string=`eval $cmd`; } 2>/dev/null &&
+ { test "X$echo_test_string" = "X$echo_test_string"; } 2>/dev/null
+ then
+ break
+ fi
+ done
+ fi
+
+ if test "X`{ $ECHO '\t'; } 2>/dev/null`" = 'X\t' &&
+ echo_testing_string=`{ $ECHO "$echo_test_string"; } 2>/dev/null` &&
+ test "X$echo_testing_string" = "X$echo_test_string"; then
+ :
+ else
+ # The Solaris, AIX, and Digital Unix default echo programs unquote
+ # backslashes. This makes it impossible to quote backslashes using
+ # echo "$something" | sed 's/\\/\\\\/g'
+ #
+ # So, first we look for a working echo in the user's PATH.
+
+ lt_save_ifs="$IFS"; IFS=$PATH_SEPARATOR
+ for dir in $PATH /usr/ucb; do
+ IFS="$lt_save_ifs"
+ if (test -f $dir/echo || test -f $dir/echo$ac_exeext) &&
+ test "X`($dir/echo '\t') 2>/dev/null`" = 'X\t' &&
+ echo_testing_string=`($dir/echo "$echo_test_string") 2>/dev/null` &&
+ test "X$echo_testing_string" = "X$echo_test_string"; then
+ ECHO="$dir/echo"
+ break
+ fi
+ done
+ IFS="$lt_save_ifs"
+
+ if test "X$ECHO" = Xecho; then
+ # We didn't find a better echo, so look for alternatives.
+ if test "X`{ print -r '\t'; } 2>/dev/null`" = 'X\t' &&
+ echo_testing_string=`{ print -r "$echo_test_string"; } 2>/dev/null` &&
+ test "X$echo_testing_string" = "X$echo_test_string"; then
+ # This shell has a builtin print -r that does the trick.
+ ECHO='print -r'
+ elif { test -f /bin/ksh || test -f /bin/ksh$ac_exeext; } &&
+ test "X$CONFIG_SHELL" != X/bin/ksh; then
+ # If we have ksh, try running configure again with it.
+ ORIGINAL_CONFIG_SHELL=${CONFIG_SHELL-/bin/sh}
+ export ORIGINAL_CONFIG_SHELL
+ CONFIG_SHELL=/bin/ksh
+ export CONFIG_SHELL
+ exec $CONFIG_SHELL "[$]0" --no-reexec ${1+"[$]@"}
+ else
+ # Try using printf.
+ ECHO='printf %s\n'
+ if test "X`{ $ECHO '\t'; } 2>/dev/null`" = 'X\t' &&
+ echo_testing_string=`{ $ECHO "$echo_test_string"; } 2>/dev/null` &&
+ test "X$echo_testing_string" = "X$echo_test_string"; then
+ # Cool, printf works
+ :
+ elif echo_testing_string=`($ORIGINAL_CONFIG_SHELL "[$]0" --fallback-echo '\t') 2>/dev/null` &&
+ test "X$echo_testing_string" = 'X\t' &&
+ echo_testing_string=`($ORIGINAL_CONFIG_SHELL "[$]0" --fallback-echo "$echo_test_string") 2>/dev/null` &&
+ test "X$echo_testing_string" = "X$echo_test_string"; then
+ CONFIG_SHELL=$ORIGINAL_CONFIG_SHELL
+ export CONFIG_SHELL
+ SHELL="$CONFIG_SHELL"
+ export SHELL
+ ECHO="$CONFIG_SHELL [$]0 --fallback-echo"
+ elif echo_testing_string=`($CONFIG_SHELL "[$]0" --fallback-echo '\t') 2>/dev/null` &&
+ test "X$echo_testing_string" = 'X\t' &&
+ echo_testing_string=`($CONFIG_SHELL "[$]0" --fallback-echo "$echo_test_string") 2>/dev/null` &&
+ test "X$echo_testing_string" = "X$echo_test_string"; then
+ ECHO="$CONFIG_SHELL [$]0 --fallback-echo"
+ else
+ # maybe with a smaller string...
+ prev=:
+
+ for cmd in 'echo test' 'sed 2q "[$]0"' 'sed 10q "[$]0"' 'sed 20q "[$]0"' 'sed 50q "[$]0"'; do
+ if { test "X$echo_test_string" = "X`eval $cmd`"; } 2>/dev/null
+ then
+ break
+ fi
+ prev="$cmd"
+ done
+
+ if test "$prev" != 'sed 50q "[$]0"'; then
+ echo_test_string=`eval $prev`
+ export echo_test_string
+ exec ${ORIGINAL_CONFIG_SHELL-${CONFIG_SHELL-/bin/sh}} "[$]0" ${1+"[$]@"}
+ else
+ # Oops. We lost completely, so just stick with echo.
+ ECHO=echo
+ fi
+ fi
+ fi
+ fi
+ fi
+fi
+
+# Copy echo and quote the copy suitably for passing to libtool from
+# the Makefile, instead of quoting the original, which is used later.
+lt_ECHO=$ECHO
+if test "X$lt_ECHO" = "X$CONFIG_SHELL [$]0 --fallback-echo"; then
+ lt_ECHO="$CONFIG_SHELL \\\$\[$]0 --fallback-echo"
+fi
+
+AC_SUBST(lt_ECHO)
+])
+_LT_DECL([], [SHELL], [1], [Shell to use when invoking shell scripts])
+_LT_DECL([], [ECHO], [1],
+ [An echo program that does not interpret backslashes])
+])# _LT_PROG_ECHO_BACKSLASH
+
+
+# _LT_ENABLE_LOCK
+# ---------------
+m4_defun([_LT_ENABLE_LOCK],
+[AC_ARG_ENABLE([libtool-lock],
+ [AS_HELP_STRING([--disable-libtool-lock],
+ [avoid locking (might break parallel builds)])])
+test "x$enable_libtool_lock" != xno && enable_libtool_lock=yes
+
+# Some flags need to be propagated to the compiler or linker for good
+# libtool support.
+case $host in
+ia64-*-hpux*)
+ # Find out which ABI we are using.
+ echo 'int i;' > conftest.$ac_ext
+ if AC_TRY_EVAL(ac_compile); then
+ case `/usr/bin/file conftest.$ac_objext` in
+ *ELF-32*)
+ HPUX_IA64_MODE="32"
+ ;;
+ *ELF-64*)
+ HPUX_IA64_MODE="64"
+ ;;
+ esac
+ fi
+ rm -rf conftest*
+ ;;
+*-*-irix6*)
+ # Find out which ABI we are using.
+ echo '[#]line __oline__ "configure"' > conftest.$ac_ext
+ if AC_TRY_EVAL(ac_compile); then
+ if test "$lt_cv_prog_gnu_ld" = yes; then
+ case `/usr/bin/file conftest.$ac_objext` in
+ *32-bit*)
+ LD="${LD-ld} -melf32bsmip"
+ ;;
+ *N32*)
+ LD="${LD-ld} -melf32bmipn32"
+ ;;
+ *64-bit*)
+ LD="${LD-ld} -melf64bmip"
+ ;;
+ esac
+ else
+ case `/usr/bin/file conftest.$ac_objext` in
+ *32-bit*)
+ LD="${LD-ld} -32"
+ ;;
+ *N32*)
+ LD="${LD-ld} -n32"
+ ;;
+ *64-bit*)
+ LD="${LD-ld} -64"
+ ;;
+ esac
+ fi
+ fi
+ rm -rf conftest*
+ ;;
+
+x86_64-*kfreebsd*-gnu|x86_64-*linux*|ppc*-*linux*|powerpc*-*linux*| \
+s390*-*linux*|s390*-*tpf*|sparc*-*linux*)
+ # Find out which ABI we are using.
+ echo 'int i;' > conftest.$ac_ext
+ if AC_TRY_EVAL(ac_compile); then
+ case `/usr/bin/file conftest.o` in
+ *32-bit*)
+ case $host in
+ x86_64-*kfreebsd*-gnu)
+ LD="${LD-ld} -m elf_i386_fbsd"
+ ;;
+ x86_64-*linux*)
+ LD="${LD-ld} -m elf_i386"
+ ;;
+ ppc64-*linux*|powerpc64-*linux*)
+ LD="${LD-ld} -m elf32ppclinux"
+ ;;
+ s390x-*linux*)
+ LD="${LD-ld} -m elf_s390"
+ ;;
+ sparc64-*linux*)
+ LD="${LD-ld} -m elf32_sparc"
+ ;;
+ esac
+ ;;
+ *64-bit*)
+ case $host in
+ x86_64-*kfreebsd*-gnu)
+ LD="${LD-ld} -m elf_x86_64_fbsd"
+ ;;
+ x86_64-*linux*)
+ LD="${LD-ld} -m elf_x86_64"
+ ;;
+ ppc*-*linux*|powerpc*-*linux*)
+ LD="${LD-ld} -m elf64ppc"
+ ;;
+ s390*-*linux*|s390*-*tpf*)
+ LD="${LD-ld} -m elf64_s390"
+ ;;
+ sparc*-*linux*)
+ LD="${LD-ld} -m elf64_sparc"
+ ;;
+ esac
+ ;;
+ esac
+ fi
+ rm -rf conftest*
+ ;;
+
+*-*-sco3.2v5*)
+ # On SCO OpenServer 5, we need -belf to get full-featured binaries.
+ SAVE_CFLAGS="$CFLAGS"
+ CFLAGS="$CFLAGS -belf"
+ AC_CACHE_CHECK([whether the C compiler needs -belf], lt_cv_cc_needs_belf,
+ [AC_LANG_PUSH(C)
+ AC_LINK_IFELSE([AC_LANG_PROGRAM([[]],[[]])],[lt_cv_cc_needs_belf=yes],[lt_cv_cc_needs_belf=no])
+ AC_LANG_POP])
+ if test x"$lt_cv_cc_needs_belf" != x"yes"; then
+ # this is probably gcc 2.8.0, egcs 1.0 or newer; no need for -belf
+ CFLAGS="$SAVE_CFLAGS"
+ fi
+ ;;
+sparc*-*solaris*)
+ # Find out which ABI we are using.
+ echo 'int i;' > conftest.$ac_ext
+ if AC_TRY_EVAL(ac_compile); then
+ case `/usr/bin/file conftest.o` in
+ *64-bit*)
+ case $lt_cv_prog_gnu_ld in
+ yes*) LD="${LD-ld} -m elf64_sparc" ;;
+ *)
+ if ${LD-ld} -64 -r -o conftest2.o conftest.o >/dev/null 2>&1; then
+ LD="${LD-ld} -64"
+ fi
+ ;;
+ esac
+ ;;
+ esac
+ fi
+ rm -rf conftest*
+ ;;
+esac
+
+need_locks="$enable_libtool_lock"
+])# _LT_ENABLE_LOCK
+
+
+# _LT_CMD_OLD_ARCHIVE
+# -------------------
+m4_defun([_LT_CMD_OLD_ARCHIVE],
+[AC_CHECK_TOOL(AR, ar, false)
+test -z "$AR" && AR=ar
+test -z "$AR_FLAGS" && AR_FLAGS=cru
+_LT_DECL([], [AR], [1], [The archiver])
+_LT_DECL([], [AR_FLAGS], [1])
+
+AC_CHECK_TOOL(STRIP, strip, :)
+test -z "$STRIP" && STRIP=:
+_LT_DECL([], [STRIP], [1], [A symbol stripping program])
+
+AC_CHECK_TOOL(RANLIB, ranlib, :)
+test -z "$RANLIB" && RANLIB=:
+_LT_DECL([], [RANLIB], [1],
+ [Commands used to install an old-style archive])
+
+# Determine commands to create old-style static archives.
+old_archive_cmds='$AR $AR_FLAGS $oldlib$oldobjs'
+old_postinstall_cmds='chmod 644 $oldlib'
+old_postuninstall_cmds=
+
+if test -n "$RANLIB"; then
+ case $host_os in
+ openbsd*)
+ old_postinstall_cmds="$old_postinstall_cmds~\$RANLIB -t \$oldlib"
+ ;;
+ *)
+ old_postinstall_cmds="$old_postinstall_cmds~\$RANLIB \$oldlib"
+ ;;
+ esac
+ old_archive_cmds="$old_archive_cmds~\$RANLIB \$oldlib"
+fi
+_LT_DECL([], [old_postinstall_cmds], [2])
+_LT_DECL([], [old_postuninstall_cmds], [2])
+_LT_TAGDECL([], [old_archive_cmds], [2],
+ [Commands used to build an old-style archive])
+])# _LT_CMD_OLD_ARCHIVE
+
+
+# _LT_COMPILER_OPTION(MESSAGE, VARIABLE-NAME, FLAGS,
+# [OUTPUT-FILE], [ACTION-SUCCESS], [ACTION-FAILURE])
+# ----------------------------------------------------------------
+# Check whether the given compiler option works
+AC_DEFUN([_LT_COMPILER_OPTION],
+[m4_require([_LT_FILEUTILS_DEFAULTS])dnl
+m4_require([_LT_DECL_SED])dnl
+AC_CACHE_CHECK([$1], [$2],
+ [$2=no
+ m4_if([$4], , [ac_outfile=conftest.$ac_objext], [ac_outfile=$4])
+ echo "$lt_simple_compile_test_code" > conftest.$ac_ext
+ lt_compiler_flag="$3"
+ # Insert the option either (1) after the last *FLAGS variable, or
+ # (2) before a word containing "conftest.", or (3) at the end.
+ # Note that $ac_compile itself does not contain backslashes and begins
+ # with a dollar sign (not a hyphen), so the echo should work correctly.
+ # The option is referenced via a variable to avoid confusing sed.
+ lt_compile=`echo "$ac_compile" | $SED \
+ -e 's:.*FLAGS}\{0,1\} :&$lt_compiler_flag :; t' \
+ -e 's: [[^ ]]*conftest\.: $lt_compiler_flag&:; t' \
+ -e 's:$: $lt_compiler_flag:'`
+ (eval echo "\"\$as_me:__oline__: $lt_compile\"" >&AS_MESSAGE_LOG_FD)
+ (eval "$lt_compile" 2>conftest.err)
+ ac_status=$?
+ cat conftest.err >&AS_MESSAGE_LOG_FD
+ echo "$as_me:__oline__: \$? = $ac_status" >&AS_MESSAGE_LOG_FD
+ if (exit $ac_status) && test -s "$ac_outfile"; then
+ # The compiler can only warn and ignore the option if not recognized
+ # So say no if there are warnings other than the usual output.
+ $ECHO "X$_lt_compiler_boilerplate" | $Xsed -e '/^$/d' >conftest.exp
+ $SED '/^$/d; /^ *+/d' conftest.err >conftest.er2
+ if test ! -s conftest.er2 || diff conftest.exp conftest.er2 >/dev/null; then
+ $2=yes
+ fi
+ fi
+ $RM conftest*
+])
+
+if test x"[$]$2" = xyes; then
+ m4_if([$5], , :, [$5])
+else
+ m4_if([$6], , :, [$6])
+fi
+])# _LT_COMPILER_OPTION
+
+# Old name:
+AU_ALIAS([AC_LIBTOOL_COMPILER_OPTION], [_LT_COMPILER_OPTION])
+dnl aclocal-1.4 backwards compatibility:
+dnl AC_DEFUN([AC_LIBTOOL_COMPILER_OPTION], [])
+
+
+# _LT_LINKER_OPTION(MESSAGE, VARIABLE-NAME, FLAGS,
+# [ACTION-SUCCESS], [ACTION-FAILURE])
+# ----------------------------------------------------
+# Check whether the given linker option works
+AC_DEFUN([_LT_LINKER_OPTION],
+[m4_require([_LT_FILEUTILS_DEFAULTS])dnl
+m4_require([_LT_DECL_SED])dnl
+AC_CACHE_CHECK([$1], [$2],
+ [$2=no
+ save_LDFLAGS="$LDFLAGS"
+ LDFLAGS="$LDFLAGS $3"
+ echo "$lt_simple_link_test_code" > conftest.$ac_ext
+ if (eval $ac_link 2>conftest.err) && test -s conftest$ac_exeext; then
+ # The linker can only warn and ignore the option if not recognized
+ # So say no if there are warnings
+ if test -s conftest.err; then
+ # Append any errors to the config.log.
+ cat conftest.err 1>&AS_MESSAGE_LOG_FD
+ $ECHO "X$_lt_linker_boilerplate" | $Xsed -e '/^$/d' > conftest.exp
+ $SED '/^$/d; /^ *+/d' conftest.err >conftest.er2
+ if diff conftest.exp conftest.er2 >/dev/null; then
+ $2=yes
+ fi
+ else
+ $2=yes
+ fi
+ fi
+ $RM -r conftest*
+ LDFLAGS="$save_LDFLAGS"
+])
+
+if test x"[$]$2" = xyes; then
+ m4_if([$4], , :, [$4])
+else
+ m4_if([$5], , :, [$5])
+fi
+])# _LT_LINKER_OPTION
+
+# Old name:
+AU_ALIAS([AC_LIBTOOL_LINKER_OPTION], [_LT_LINKER_OPTION])
+dnl aclocal-1.4 backwards compatibility:
+dnl AC_DEFUN([AC_LIBTOOL_LINKER_OPTION], [])
+
+
+# LT_CMD_MAX_LEN
+#---------------
+AC_DEFUN([LT_CMD_MAX_LEN],
+[AC_REQUIRE([AC_CANONICAL_HOST])dnl
+# find the maximum length of command line arguments
+AC_MSG_CHECKING([the maximum length of command line arguments])
+AC_CACHE_VAL([lt_cv_sys_max_cmd_len], [dnl
+ i=0
+ teststring="ABCD"
+
+ case $build_os in
+ msdosdjgpp*)
+ # On DJGPP, this test can blow up pretty badly due to problems in libc
+ # (any single argument exceeding 2000 bytes causes a buffer overrun
+ # during glob expansion). Even if it were fixed, the result of this
+ # check would be larger than it should be.
+ lt_cv_sys_max_cmd_len=12288; # 12K is about right
+ ;;
+
+ gnu*)
+ # Under GNU Hurd, this test is not required because there is
+ # no limit to the length of command line arguments.
+ # Libtool will interpret -1 as no limit whatsoever
+ lt_cv_sys_max_cmd_len=-1;
+ ;;
+
+ cygwin* | mingw* | cegcc*)
+ # On Win9x/ME, this test blows up -- it succeeds, but takes
+ # about 5 minutes as the teststring grows exponentially.
+ # Worse, since 9x/ME are not pre-emptively multitasking,
+ # you end up with a "frozen" computer, even though with patience
+ # the test eventually succeeds (with a max line length of 256k).
+ # Instead, let's just punt: use the minimum linelength reported by
+ # all of the supported platforms: 8192 (on NT/2K/XP).
+ lt_cv_sys_max_cmd_len=8192;
+ ;;
+
+ amigaos*)
+ # On AmigaOS with pdksh, this test takes hours, literally.
+ # So we just punt and use a minimum line length of 8192.
+ lt_cv_sys_max_cmd_len=8192;
+ ;;
+
+ netbsd* | freebsd* | openbsd* | darwin* | dragonfly*)
+ # This has been around since 386BSD, at least. Likely further.
+ if test -x /sbin/sysctl; then
+ lt_cv_sys_max_cmd_len=`/sbin/sysctl -n kern.argmax`
+ elif test -x /usr/sbin/sysctl; then
+ lt_cv_sys_max_cmd_len=`/usr/sbin/sysctl -n kern.argmax`
+ else
+ lt_cv_sys_max_cmd_len=65536 # usable default for all BSDs
+ fi
+ # And add a safety zone
+ lt_cv_sys_max_cmd_len=`expr $lt_cv_sys_max_cmd_len \/ 4`
+ lt_cv_sys_max_cmd_len=`expr $lt_cv_sys_max_cmd_len \* 3`
+ ;;
+
+ interix*)
+ # We know the value 262144 and hardcode it with a safety zone (like BSD)
+ lt_cv_sys_max_cmd_len=196608
+ ;;
+
+ osf*)
+ # Dr. Hans Ekkehard Plesser reports seeing a kernel panic running configure
+ # due to this test when exec_disable_arg_limit is 1 on Tru64. It is not
+ # nice to cause kernel panics so lets avoid the loop below.
+ # First set a reasonable default.
+ lt_cv_sys_max_cmd_len=16384
+ #
+ if test -x /sbin/sysconfig; then
+ case `/sbin/sysconfig -q proc exec_disable_arg_limit` in
+ *1*) lt_cv_sys_max_cmd_len=-1 ;;
+ esac
+ fi
+ ;;
+ sco3.2v5*)
+ lt_cv_sys_max_cmd_len=102400
+ ;;
+ sysv5* | sco5v6* | sysv4.2uw2*)
+ kargmax=`grep ARG_MAX /etc/conf/cf.d/stune 2>/dev/null`
+ if test -n "$kargmax"; then
+ lt_cv_sys_max_cmd_len=`echo $kargmax | sed 's/.*[[ ]]//'`
+ else
+ lt_cv_sys_max_cmd_len=32768
+ fi
+ ;;
+ *)
+ lt_cv_sys_max_cmd_len=`(getconf ARG_MAX) 2> /dev/null`
+ if test -n "$lt_cv_sys_max_cmd_len"; then
+ lt_cv_sys_max_cmd_len=`expr $lt_cv_sys_max_cmd_len \/ 4`
+ lt_cv_sys_max_cmd_len=`expr $lt_cv_sys_max_cmd_len \* 3`
+ else
+ # Make teststring a little bigger before we do anything with it.
+ # a 1K string should be a reasonable start.
+ for i in 1 2 3 4 5 6 7 8 ; do
+ teststring=$teststring$teststring
+ done
+ SHELL=${SHELL-${CONFIG_SHELL-/bin/sh}}
+ # If test is not a shell built-in, we'll probably end up computing a
+ # maximum length that is only half of the actual maximum length, but
+ # we can't tell.
+ while { test "X"`$SHELL [$]0 --fallback-echo "X$teststring$teststring" 2>/dev/null` \
+ = "XX$teststring$teststring"; } >/dev/null 2>&1 &&
+ test $i != 17 # 1/2 MB should be enough
+ do
+ i=`expr $i + 1`
+ teststring=$teststring$teststring
+ done
+ # Only check the string length outside the loop.
+ lt_cv_sys_max_cmd_len=`expr "X$teststring" : ".*" 2>&1`
+ teststring=
+ # Add a significant safety factor because C++ compilers can tack on
+ # massive amounts of additional arguments before passing them to the
+ # linker. It appears as though 1/2 is a usable value.
+ lt_cv_sys_max_cmd_len=`expr $lt_cv_sys_max_cmd_len \/ 2`
+ fi
+ ;;
+ esac
+])
+if test -n $lt_cv_sys_max_cmd_len ; then
+ AC_MSG_RESULT($lt_cv_sys_max_cmd_len)
+else
+ AC_MSG_RESULT(none)
+fi
+max_cmd_len=$lt_cv_sys_max_cmd_len
+_LT_DECL([], [max_cmd_len], [0],
+ [What is the maximum length of a command?])
+])# LT_CMD_MAX_LEN
+
+# Old name:
+AU_ALIAS([AC_LIBTOOL_SYS_MAX_CMD_LEN], [LT_CMD_MAX_LEN])
+dnl aclocal-1.4 backwards compatibility:
+dnl AC_DEFUN([AC_LIBTOOL_SYS_MAX_CMD_LEN], [])
+
+
+# _LT_HEADER_DLFCN
+# ----------------
+m4_defun([_LT_HEADER_DLFCN],
+[AC_CHECK_HEADERS([dlfcn.h], [], [], [AC_INCLUDES_DEFAULT])dnl
+])# _LT_HEADER_DLFCN
+
+
+# _LT_TRY_DLOPEN_SELF (ACTION-IF-TRUE, ACTION-IF-TRUE-W-USCORE,
+# ACTION-IF-FALSE, ACTION-IF-CROSS-COMPILING)
+# ----------------------------------------------------------------
+m4_defun([_LT_TRY_DLOPEN_SELF],
+[m4_require([_LT_HEADER_DLFCN])dnl
+if test "$cross_compiling" = yes; then :
+ [$4]
+else
+ lt_dlunknown=0; lt_dlno_uscore=1; lt_dlneed_uscore=2
+ lt_status=$lt_dlunknown
+ cat > conftest.$ac_ext <<_LT_EOF
+[#line __oline__ "configure"
+#include "confdefs.h"
+
+#if HAVE_DLFCN_H
+#include <dlfcn.h>
+#endif
+
+#include <stdio.h>
+
+#ifdef RTLD_GLOBAL
+# define LT_DLGLOBAL RTLD_GLOBAL
+#else
+# ifdef DL_GLOBAL
+# define LT_DLGLOBAL DL_GLOBAL
+# else
+# define LT_DLGLOBAL 0
+# endif
+#endif
+
+/* We may have to define LT_DLLAZY_OR_NOW in the command line if we
+ find out it does not work in some platform. */
+#ifndef LT_DLLAZY_OR_NOW
+# ifdef RTLD_LAZY
+# define LT_DLLAZY_OR_NOW RTLD_LAZY
+# else
+# ifdef DL_LAZY
+# define LT_DLLAZY_OR_NOW DL_LAZY
+# else
+# ifdef RTLD_NOW
+# define LT_DLLAZY_OR_NOW RTLD_NOW
+# else
+# ifdef DL_NOW
+# define LT_DLLAZY_OR_NOW DL_NOW
+# else
+# define LT_DLLAZY_OR_NOW 0
+# endif
+# endif
+# endif
+# endif
+#endif
+
+void fnord() { int i=42;}
+int main ()
+{
+ void *self = dlopen (0, LT_DLGLOBAL|LT_DLLAZY_OR_NOW);
+ int status = $lt_dlunknown;
+
+ if (self)
+ {
+ if (dlsym (self,"fnord")) status = $lt_dlno_uscore;
+ else if (dlsym( self,"_fnord")) status = $lt_dlneed_uscore;
+ /* dlclose (self); */
+ }
+ else
+ puts (dlerror ());
+
+ return status;
+}]
+_LT_EOF
+ if AC_TRY_EVAL(ac_link) && test -s conftest${ac_exeext} 2>/dev/null; then
+ (./conftest; exit; ) >&AS_MESSAGE_LOG_FD 2>/dev/null
+ lt_status=$?
+ case x$lt_status in
+ x$lt_dlno_uscore) $1 ;;
+ x$lt_dlneed_uscore) $2 ;;
+ x$lt_dlunknown|x*) $3 ;;
+ esac
+ else :
+ # compilation failed
+ $3
+ fi
+fi
+rm -fr conftest*
+])# _LT_TRY_DLOPEN_SELF
+
+
+# LT_SYS_DLOPEN_SELF
+# ------------------
+AC_DEFUN([LT_SYS_DLOPEN_SELF],
+[m4_require([_LT_HEADER_DLFCN])dnl
+if test "x$enable_dlopen" != xyes; then
+ enable_dlopen=unknown
+ enable_dlopen_self=unknown
+ enable_dlopen_self_static=unknown
+else
+ lt_cv_dlopen=no
+ lt_cv_dlopen_libs=
+
+ case $host_os in
+ beos*)
+ lt_cv_dlopen="load_add_on"
+ lt_cv_dlopen_libs=
+ lt_cv_dlopen_self=yes
+ ;;
+
+ mingw* | pw32* | cegcc*)
+ lt_cv_dlopen="LoadLibrary"
+ lt_cv_dlopen_libs=
+ ;;
+
+ cygwin*)
+ lt_cv_dlopen="dlopen"
+ lt_cv_dlopen_libs=
+ ;;
+
+ darwin*)
+ # if libdl is installed we need to link against it
+ AC_CHECK_LIB([dl], [dlopen],
+ [lt_cv_dlopen="dlopen" lt_cv_dlopen_libs="-ldl"],[
+ lt_cv_dlopen="dyld"
+ lt_cv_dlopen_libs=
+ lt_cv_dlopen_self=yes
+ ])
+ ;;
+
+ *)
+ AC_CHECK_FUNC([shl_load],
+ [lt_cv_dlopen="shl_load"],
+ [AC_CHECK_LIB([dld], [shl_load],
+ [lt_cv_dlopen="shl_load" lt_cv_dlopen_libs="-ldld"],
+ [AC_CHECK_FUNC([dlopen],
+ [lt_cv_dlopen="dlopen"],
+ [AC_CHECK_LIB([dl], [dlopen],
+ [lt_cv_dlopen="dlopen" lt_cv_dlopen_libs="-ldl"],
+ [AC_CHECK_LIB([svld], [dlopen],
+ [lt_cv_dlopen="dlopen" lt_cv_dlopen_libs="-lsvld"],
+ [AC_CHECK_LIB([dld], [dld_link],
+ [lt_cv_dlopen="dld_link" lt_cv_dlopen_libs="-ldld"])
+ ])
+ ])
+ ])
+ ])
+ ])
+ ;;
+ esac
+
+ if test "x$lt_cv_dlopen" != xno; then
+ enable_dlopen=yes
+ else
+ enable_dlopen=no
+ fi
+
+ case $lt_cv_dlopen in
+ dlopen)
+ save_CPPFLAGS="$CPPFLAGS"
+ test "x$ac_cv_header_dlfcn_h" = xyes && CPPFLAGS="$CPPFLAGS -DHAVE_DLFCN_H"
+
+ save_LDFLAGS="$LDFLAGS"
+ wl=$lt_prog_compiler_wl eval LDFLAGS=\"\$LDFLAGS $export_dynamic_flag_spec\"
+
+ save_LIBS="$LIBS"
+ LIBS="$lt_cv_dlopen_libs $LIBS"
+
+ AC_CACHE_CHECK([whether a program can dlopen itself],
+ lt_cv_dlopen_self, [dnl
+ _LT_TRY_DLOPEN_SELF(
+ lt_cv_dlopen_self=yes, lt_cv_dlopen_self=yes,
+ lt_cv_dlopen_self=no, lt_cv_dlopen_self=cross)
+ ])
+
+ if test "x$lt_cv_dlopen_self" = xyes; then
+ wl=$lt_prog_compiler_wl eval LDFLAGS=\"\$LDFLAGS $lt_prog_compiler_static\"
+ AC_CACHE_CHECK([whether a statically linked program can dlopen itself],
+ lt_cv_dlopen_self_static, [dnl
+ _LT_TRY_DLOPEN_SELF(
+ lt_cv_dlopen_self_static=yes, lt_cv_dlopen_self_static=yes,
+ lt_cv_dlopen_self_static=no, lt_cv_dlopen_self_static=cross)
+ ])
+ fi
+
+ CPPFLAGS="$save_CPPFLAGS"
+ LDFLAGS="$save_LDFLAGS"
+ LIBS="$save_LIBS"
+ ;;
+ esac
+
+ case $lt_cv_dlopen_self in
+ yes|no) enable_dlopen_self=$lt_cv_dlopen_self ;;
+ *) enable_dlopen_self=unknown ;;
+ esac
+
+ case $lt_cv_dlopen_self_static in
+ yes|no) enable_dlopen_self_static=$lt_cv_dlopen_self_static ;;
+ *) enable_dlopen_self_static=unknown ;;
+ esac
+fi
+_LT_DECL([dlopen_support], [enable_dlopen], [0],
+ [Whether dlopen is supported])
+_LT_DECL([dlopen_self], [enable_dlopen_self], [0],
+ [Whether dlopen of programs is supported])
+_LT_DECL([dlopen_self_static], [enable_dlopen_self_static], [0],
+ [Whether dlopen of statically linked programs is supported])
+])# LT_SYS_DLOPEN_SELF
+
+# Old name:
+AU_ALIAS([AC_LIBTOOL_DLOPEN_SELF], [LT_SYS_DLOPEN_SELF])
+dnl aclocal-1.4 backwards compatibility:
+dnl AC_DEFUN([AC_LIBTOOL_DLOPEN_SELF], [])
+
+
+# _LT_COMPILER_C_O([TAGNAME])
+# ---------------------------
+# Check to see if options -c and -o are simultaneously supported by compiler.
+# This macro does not hard code the compiler like AC_PROG_CC_C_O.
+m4_defun([_LT_COMPILER_C_O],
+[m4_require([_LT_DECL_SED])dnl
+m4_require([_LT_FILEUTILS_DEFAULTS])dnl
+m4_require([_LT_TAG_COMPILER])dnl
+AC_CACHE_CHECK([if $compiler supports -c -o file.$ac_objext],
+ [_LT_TAGVAR(lt_cv_prog_compiler_c_o, $1)],
+ [_LT_TAGVAR(lt_cv_prog_compiler_c_o, $1)=no
+ $RM -r conftest 2>/dev/null
+ mkdir conftest
+ cd conftest
+ mkdir out
+ echo "$lt_simple_compile_test_code" > conftest.$ac_ext
+
+ lt_compiler_flag="-o out/conftest2.$ac_objext"
+ # Insert the option either (1) after the last *FLAGS variable, or
+ # (2) before a word containing "conftest.", or (3) at the end.
+ # Note that $ac_compile itself does not contain backslashes and begins
+ # with a dollar sign (not a hyphen), so the echo should work correctly.
+ lt_compile=`echo "$ac_compile" | $SED \
+ -e 's:.*FLAGS}\{0,1\} :&$lt_compiler_flag :; t' \
+ -e 's: [[^ ]]*conftest\.: $lt_compiler_flag&:; t' \
+ -e 's:$: $lt_compiler_flag:'`
+ (eval echo "\"\$as_me:__oline__: $lt_compile\"" >&AS_MESSAGE_LOG_FD)
+ (eval "$lt_compile" 2>out/conftest.err)
+ ac_status=$?
+ cat out/conftest.err >&AS_MESSAGE_LOG_FD
+ echo "$as_me:__oline__: \$? = $ac_status" >&AS_MESSAGE_LOG_FD
+ if (exit $ac_status) && test -s out/conftest2.$ac_objext
+ then
+ # The compiler can only warn and ignore the option if not recognized
+ # So say no if there are warnings
+ $ECHO "X$_lt_compiler_boilerplate" | $Xsed -e '/^$/d' > out/conftest.exp
+ $SED '/^$/d; /^ *+/d' out/conftest.err >out/conftest.er2
+ if test ! -s out/conftest.er2 || diff out/conftest.exp out/conftest.er2 >/dev/null; then
+ _LT_TAGVAR(lt_cv_prog_compiler_c_o, $1)=yes
+ fi
+ fi
+ chmod u+w . 2>&AS_MESSAGE_LOG_FD
+ $RM conftest*
+ # SGI C++ compiler will create directory out/ii_files/ for
+ # template instantiation
+ test -d out/ii_files && $RM out/ii_files/* && rmdir out/ii_files
+ $RM out/* && rmdir out
+ cd ..
+ $RM -r conftest
+ $RM conftest*
+])
+_LT_TAGDECL([compiler_c_o], [lt_cv_prog_compiler_c_o], [1],
+ [Does compiler simultaneously support -c and -o options?])
+])# _LT_COMPILER_C_O
+
+
+# _LT_COMPILER_FILE_LOCKS([TAGNAME])
+# ----------------------------------
+# Check to see if we can do hard links to lock some files if needed
+m4_defun([_LT_COMPILER_FILE_LOCKS],
+[m4_require([_LT_ENABLE_LOCK])dnl
+m4_require([_LT_FILEUTILS_DEFAULTS])dnl
+_LT_COMPILER_C_O([$1])
+
+hard_links="nottested"
+if test "$_LT_TAGVAR(lt_cv_prog_compiler_c_o, $1)" = no && test "$need_locks" != no; then
+ # do not overwrite the value of need_locks provided by the user
+ AC_MSG_CHECKING([if we can lock with hard links])
+ hard_links=yes
+ $RM conftest*
+ ln conftest.a conftest.b 2>/dev/null && hard_links=no
+ touch conftest.a
+ ln conftest.a conftest.b 2>&5 || hard_links=no
+ ln conftest.a conftest.b 2>/dev/null && hard_links=no
+ AC_MSG_RESULT([$hard_links])
+ if test "$hard_links" = no; then
+ AC_MSG_WARN([`$CC' does not support `-c -o', so `make -j' may be unsafe])
+ need_locks=warn
+ fi
+else
+ need_locks=no
+fi
+_LT_DECL([], [need_locks], [1], [Must we lock files when doing compilation?])
+])# _LT_COMPILER_FILE_LOCKS
+
+
+# _LT_CHECK_OBJDIR
+# ----------------
+m4_defun([_LT_CHECK_OBJDIR],
+[AC_CACHE_CHECK([for objdir], [lt_cv_objdir],
+[rm -f .libs 2>/dev/null
+mkdir .libs 2>/dev/null
+if test -d .libs; then
+ lt_cv_objdir=.libs
+else
+ # MS-DOS does not allow filenames that begin with a dot.
+ lt_cv_objdir=_libs
+fi
+rmdir .libs 2>/dev/null])
+objdir=$lt_cv_objdir
+_LT_DECL([], [objdir], [0],
+ [The name of the directory that contains temporary libtool files])dnl
+m4_pattern_allow([LT_OBJDIR])dnl
+AC_DEFINE_UNQUOTED(LT_OBJDIR, "$lt_cv_objdir/",
+ [Define to the sub-directory in which libtool stores uninstalled libraries.])
+])# _LT_CHECK_OBJDIR
+
+
+# _LT_LINKER_HARDCODE_LIBPATH([TAGNAME])
+# --------------------------------------
+# Check hardcoding attributes.
+m4_defun([_LT_LINKER_HARDCODE_LIBPATH],
+[AC_MSG_CHECKING([how to hardcode library paths into programs])
+_LT_TAGVAR(hardcode_action, $1)=
+if test -n "$_LT_TAGVAR(hardcode_libdir_flag_spec, $1)" ||
+ test -n "$_LT_TAGVAR(runpath_var, $1)" ||
+ test "X$_LT_TAGVAR(hardcode_automatic, $1)" = "Xyes" ; then
+
+ # We can hardcode non-existent directories.
+ if test "$_LT_TAGVAR(hardcode_direct, $1)" != no &&
+ # If the only mechanism to avoid hardcoding is shlibpath_var, we
+ # have to relink, otherwise we might link with an installed library
+ # when we should be linking with a yet-to-be-installed one
+ ## test "$_LT_TAGVAR(hardcode_shlibpath_var, $1)" != no &&
+ test "$_LT_TAGVAR(hardcode_minus_L, $1)" != no; then
+ # Linking always hardcodes the temporary library directory.
+ _LT_TAGVAR(hardcode_action, $1)=relink
+ else
+ # We can link without hardcoding, and we can hardcode nonexisting dirs.
+ _LT_TAGVAR(hardcode_action, $1)=immediate
+ fi
+else
+ # We cannot hardcode anything, or else we can only hardcode existing
+ # directories.
+ _LT_TAGVAR(hardcode_action, $1)=unsupported
+fi
+AC_MSG_RESULT([$_LT_TAGVAR(hardcode_action, $1)])
+
+if test "$_LT_TAGVAR(hardcode_action, $1)" = relink ||
+ test "$_LT_TAGVAR(inherit_rpath, $1)" = yes; then
+ # Fast installation is not supported
+ enable_fast_install=no
+elif test "$shlibpath_overrides_runpath" = yes ||
+ test "$enable_shared" = no; then
+ # Fast installation is not necessary
+ enable_fast_install=needless
+fi
+_LT_TAGDECL([], [hardcode_action], [0],
+ [How to hardcode a shared library path into an executable])
+])# _LT_LINKER_HARDCODE_LIBPATH
+
+
+# _LT_CMD_STRIPLIB
+# ----------------
+m4_defun([_LT_CMD_STRIPLIB],
+[m4_require([_LT_DECL_EGREP])
+striplib=
+old_striplib=
+AC_MSG_CHECKING([whether stripping libraries is possible])
+if test -n "$STRIP" && $STRIP -V 2>&1 | $GREP "GNU strip" >/dev/null; then
+ test -z "$old_striplib" && old_striplib="$STRIP --strip-debug"
+ test -z "$striplib" && striplib="$STRIP --strip-unneeded"
+ AC_MSG_RESULT([yes])
+else
+# FIXME - insert some real tests, host_os isn't really good enough
+ case $host_os in
+ darwin*)
+ if test -n "$STRIP" ; then
+ striplib="$STRIP -x"
+ old_striplib="$STRIP -S"
+ AC_MSG_RESULT([yes])
+ else
+ AC_MSG_RESULT([no])
+ fi
+ ;;
+ *)
+ AC_MSG_RESULT([no])
+ ;;
+ esac
+fi
+_LT_DECL([], [old_striplib], [1], [Commands to strip libraries])
+_LT_DECL([], [striplib], [1])
+])# _LT_CMD_STRIPLIB
+
+
+# _LT_SYS_DYNAMIC_LINKER([TAG])
+# -----------------------------
+# PORTME Fill in your ld.so characteristics
+m4_defun([_LT_SYS_DYNAMIC_LINKER],
+[AC_REQUIRE([AC_CANONICAL_HOST])dnl
+m4_require([_LT_DECL_EGREP])dnl
+m4_require([_LT_FILEUTILS_DEFAULTS])dnl
+m4_require([_LT_DECL_OBJDUMP])dnl
+m4_require([_LT_DECL_SED])dnl
+AC_MSG_CHECKING([dynamic linker characteristics])
+m4_if([$1],
+ [], [
+if test "$GCC" = yes; then
+ case $host_os in
+ darwin*) lt_awk_arg="/^libraries:/,/LR/" ;;
+ *) lt_awk_arg="/^libraries:/" ;;
+ esac
+ lt_search_path_spec=`$CC -print-search-dirs | awk $lt_awk_arg | $SED -e "s/^libraries://" -e "s,=/,/,g"`
+ if $ECHO "$lt_search_path_spec" | $GREP ';' >/dev/null ; then
+ # if the path contains ";" then we assume it to be the separator
+ # otherwise default to the standard path separator (i.e. ":") - it is
+ # assumed that no part of a normal pathname contains ";" but that should
+ # okay in the real world where ";" in dirpaths is itself problematic.
+ lt_search_path_spec=`$ECHO "$lt_search_path_spec" | $SED -e 's/;/ /g'`
+ else
+ lt_search_path_spec=`$ECHO "$lt_search_path_spec" | $SED -e "s/$PATH_SEPARATOR/ /g"`
+ fi
+ # Ok, now we have the path, separated by spaces, we can step through it
+ # and add multilib dir if necessary.
+ lt_tmp_lt_search_path_spec=
+ lt_multi_os_dir=`$CC $CPPFLAGS $CFLAGS $LDFLAGS -print-multi-os-directory 2>/dev/null`
+ for lt_sys_path in $lt_search_path_spec; do
+ if test -d "$lt_sys_path/$lt_multi_os_dir"; then
+ lt_tmp_lt_search_path_spec="$lt_tmp_lt_search_path_spec $lt_sys_path/$lt_multi_os_dir"
+ else
+ test -d "$lt_sys_path" && \
+ lt_tmp_lt_search_path_spec="$lt_tmp_lt_search_path_spec $lt_sys_path"
+ fi
+ done
+ lt_search_path_spec=`$ECHO $lt_tmp_lt_search_path_spec | awk '
+BEGIN {RS=" "; FS="/|\n";} {
+ lt_foo="";
+ lt_count=0;
+ for (lt_i = NF; lt_i > 0; lt_i--) {
+ if ($lt_i != "" && $lt_i != ".") {
+ if ($lt_i == "..") {
+ lt_count++;
+ } else {
+ if (lt_count == 0) {
+ lt_foo="/" $lt_i lt_foo;
+ } else {
+ lt_count--;
+ }
+ }
+ }
+ }
+ if (lt_foo != "") { lt_freq[[lt_foo]]++; }
+ if (lt_freq[[lt_foo]] == 1) { print lt_foo; }
+}'`
+ sys_lib_search_path_spec=`$ECHO $lt_search_path_spec`
+else
+ sys_lib_search_path_spec="/lib /usr/lib /usr/local/lib"
+fi])
+library_names_spec=
+libname_spec='lib$name'
+soname_spec=
+shrext_cmds=".so"
+postinstall_cmds=
+postuninstall_cmds=
+finish_cmds=
+finish_eval=
+shlibpath_var=
+shlibpath_overrides_runpath=unknown
+version_type=none
+dynamic_linker="$host_os ld.so"
+sys_lib_dlsearch_path_spec="/lib /usr/lib"
+need_lib_prefix=unknown
+hardcode_into_libs=no
+
+# when you set need_version to no, make sure it does not cause -set_version
+# flags to be left without arguments
+need_version=unknown
+
+case $host_os in
+aix3*)
+ version_type=linux
+ library_names_spec='${libname}${release}${shared_ext}$versuffix $libname.a'
+ shlibpath_var=LIBPATH
+
+ # AIX 3 has no versioning support, so we append a major version to the name.
+ soname_spec='${libname}${release}${shared_ext}$major'
+ ;;
+
+aix[[4-9]]*)
+ version_type=linux
+ need_lib_prefix=no
+ need_version=no
+ hardcode_into_libs=yes
+ if test "$host_cpu" = ia64; then
+ # AIX 5 supports IA64
+ library_names_spec='${libname}${release}${shared_ext}$major ${libname}${release}${shared_ext}$versuffix $libname${shared_ext}'
+ shlibpath_var=LD_LIBRARY_PATH
+ else
+ # With GCC up to 2.95.x, collect2 would create an import file
+ # for dependence libraries. The import file would start with
+ # the line `#! .'. This would cause the generated library to
+ # depend on `.', always an invalid library. This was fixed in
+ # development snapshots of GCC prior to 3.0.
+ case $host_os in
+ aix4 | aix4.[[01]] | aix4.[[01]].*)
+ if { echo '#if __GNUC__ > 2 || (__GNUC__ == 2 && __GNUC_MINOR__ >= 97)'
+ echo ' yes '
+ echo '#endif'; } | ${CC} -E - | $GREP yes > /dev/null; then
+ :
+ else
+ can_build_shared=no
+ fi
+ ;;
+ esac
+ # AIX (on Power*) has no versioning support, so currently we can not hardcode correct
+ # soname into executable. Probably we can add versioning support to
+ # collect2, so additional links can be useful in future.
+ if test "$aix_use_runtimelinking" = yes; then
+ # If using run time linking (on AIX 4.2 or later) use lib<name>.so
+ # instead of lib<name>.a to let people know that these are not
+ # typical AIX shared libraries.
+ library_names_spec='${libname}${release}${shared_ext}$versuffix ${libname}${release}${shared_ext}$major $libname${shared_ext}'
+ else
+ # We preserve .a as extension for shared libraries through AIX4.2
+ # and later when we are not doing run time linking.
+ library_names_spec='${libname}${release}.a $libname.a'
+ soname_spec='${libname}${release}${shared_ext}$major'
+ fi
+ shlibpath_var=LIBPATH
+ fi
+ ;;
+
+amigaos*)
+ case $host_cpu in
+ powerpc)
+ # Since July 2007 AmigaOS4 officially supports .so libraries.
+ # When compiling the executable, add -use-dynld -Lsobjs: to the compileline.
+ library_names_spec='${libname}${release}${shared_ext}$versuffix ${libname}${release}${shared_ext}$major $libname${shared_ext}'
+ ;;
+ m68k)
+ library_names_spec='$libname.ixlibrary $libname.a'
+ # Create ${libname}_ixlibrary.a entries in /sys/libs.
+ finish_eval='for lib in `ls $libdir/*.ixlibrary 2>/dev/null`; do libname=`$ECHO "X$lib" | $Xsed -e '\''s%^.*/\([[^/]]*\)\.ixlibrary$%\1%'\''`; test $RM /sys/libs/${libname}_ixlibrary.a; $show "cd /sys/libs && $LN_S $lib ${libname}_ixlibrary.a"; cd /sys/libs && $LN_S $lib ${libname}_ixlibrary.a || exit 1; done'
+ ;;
+ esac
+ ;;
+
+beos*)
+ library_names_spec='${libname}${shared_ext}'
+ dynamic_linker="$host_os ld.so"
+ shlibpath_var=LIBRARY_PATH
+ ;;
+
+bsdi[[45]]*)
+ version_type=linux
+ need_version=no
+ library_names_spec='${libname}${release}${shared_ext}$versuffix ${libname}${release}${shared_ext}$major $libname${shared_ext}'
+ soname_spec='${libname}${release}${shared_ext}$major'
+ finish_cmds='PATH="\$PATH:/sbin" ldconfig $libdir'
+ shlibpath_var=LD_LIBRARY_PATH
+ sys_lib_search_path_spec="/shlib /usr/lib /usr/X11/lib /usr/contrib/lib /lib /usr/local/lib"
+ sys_lib_dlsearch_path_spec="/shlib /usr/lib /usr/local/lib"
+ # the default ld.so.conf also contains /usr/contrib/lib and
+ # /usr/X11R6/lib (/usr/X11 is a link to /usr/X11R6), but let us allow
+ # libtool to hard-code these into programs
+ ;;
+
+cygwin* | mingw* | pw32* | cegcc*)
+ version_type=windows
+ shrext_cmds=".dll"
+ need_version=no
+ need_lib_prefix=no
+
+ case $GCC,$host_os in
+ yes,cygwin* | yes,mingw* | yes,pw32* | yes,cegcc*)
+ library_names_spec='$libname.dll.a'
+ # DLL is installed to $(libdir)/../bin by postinstall_cmds
+ postinstall_cmds='base_file=`basename \${file}`~
+ dlpath=`$SHELL 2>&1 -c '\''. $dir/'\''\${base_file}'\''i; echo \$dlname'\''`~
+ dldir=$destdir/`dirname \$dlpath`~
+ test -d \$dldir || mkdir -p \$dldir~
+ $install_prog $dir/$dlname \$dldir/$dlname~
+ chmod a+x \$dldir/$dlname~
+ if test -n '\''$stripme'\'' && test -n '\''$striplib'\''; then
+ eval '\''$striplib \$dldir/$dlname'\'' || exit \$?;
+ fi'
+ postuninstall_cmds='dldll=`$SHELL 2>&1 -c '\''. $file; echo \$dlname'\''`~
+ dlpath=$dir/\$dldll~
+ $RM \$dlpath'
+ shlibpath_overrides_runpath=yes
+
+ case $host_os in
+ cygwin*)
+ # Cygwin DLLs use 'cyg' prefix rather than 'lib'
+ soname_spec='`echo ${libname} | sed -e 's/^lib/cyg/'``echo ${release} | $SED -e 's/[[.]]/-/g'`${versuffix}${shared_ext}'
+ sys_lib_search_path_spec="/usr/lib /lib/w32api /lib /usr/local/lib"
+ ;;
+ mingw* | cegcc*)
+ # MinGW DLLs use traditional 'lib' prefix
+ soname_spec='${libname}`echo ${release} | $SED -e 's/[[.]]/-/g'`${versuffix}${shared_ext}'
+ sys_lib_search_path_spec=`$CC -print-search-dirs | $GREP "^libraries:" | $SED -e "s/^libraries://" -e "s,=/,/,g"`
+ if $ECHO "$sys_lib_search_path_spec" | [$GREP ';[c-zC-Z]:/' >/dev/null]; then
+ # It is most probably a Windows format PATH printed by
+ # mingw gcc, but we are running on Cygwin. Gcc prints its search
+ # path with ; separators, and with drive letters. We can handle the
+ # drive letters (cygwin fileutils understands them), so leave them,
+ # especially as we might pass files found there to a mingw objdump,
+ # which wouldn't understand a cygwinified path. Ahh.
+ sys_lib_search_path_spec=`$ECHO "$sys_lib_search_path_spec" | $SED -e 's/;/ /g'`
+ else
+ sys_lib_search_path_spec=`$ECHO "$sys_lib_search_path_spec" | $SED -e "s/$PATH_SEPARATOR/ /g"`
+ fi
+ ;;
+ pw32*)
+ # pw32 DLLs use 'pw' prefix rather than 'lib'
+ library_names_spec='`echo ${libname} | sed -e 's/^lib/pw/'``echo ${release} | $SED -e 's/[[.]]/-/g'`${versuffix}${shared_ext}'
+ ;;
+ esac
+ ;;
+
+ *)
+ library_names_spec='${libname}`echo ${release} | $SED -e 's/[[.]]/-/g'`${versuffix}${shared_ext} $libname.lib'
+ ;;
+ esac
+ dynamic_linker='Win32 ld.exe'
+ # FIXME: first we should search . and the directory the executable is in
+ shlibpath_var=PATH
+ ;;
+
+darwin* | rhapsody*)
+ dynamic_linker="$host_os dyld"
+ version_type=darwin
+ need_lib_prefix=no
+ need_version=no
+ library_names_spec='${libname}${release}${major}$shared_ext ${libname}$shared_ext'
+ soname_spec='${libname}${release}${major}$shared_ext'
+ shlibpath_overrides_runpath=yes
+ shlibpath_var=DYLD_LIBRARY_PATH
+ shrext_cmds='`test .$module = .yes && echo .so || echo .dylib`'
+m4_if([$1], [],[
+ sys_lib_search_path_spec="$sys_lib_search_path_spec /usr/local/lib"])
+ sys_lib_dlsearch_path_spec='/usr/local/lib /lib /usr/lib'
+ ;;
+
+dgux*)
+ version_type=linux
+ need_lib_prefix=no
+ need_version=no
+ library_names_spec='${libname}${release}${shared_ext}$versuffix ${libname}${release}${shared_ext}$major $libname$shared_ext'
+ soname_spec='${libname}${release}${shared_ext}$major'
+ shlibpath_var=LD_LIBRARY_PATH
+ ;;
+
+freebsd1*)
+ dynamic_linker=no
+ ;;
+
+freebsd* | dragonfly*)
+ # DragonFly does not have aout. When/if they implement a new
+ # versioning mechanism, adjust this.
+ if test -x /usr/bin/objformat; then
+ objformat=`/usr/bin/objformat`
+ else
+ case $host_os in
+ freebsd[[123]]*) objformat=aout ;;
+ *) objformat=elf ;;
+ esac
+ fi
+ version_type=freebsd-$objformat
+ case $version_type in
+ freebsd-elf*)
+ library_names_spec='${libname}${release}${shared_ext}$versuffix ${libname}${release}${shared_ext} $libname${shared_ext}'
+ need_version=no
+ need_lib_prefix=no
+ ;;
+ freebsd-*)
+ library_names_spec='${libname}${release}${shared_ext}$versuffix $libname${shared_ext}$versuffix'
+ need_version=yes
+ ;;
+ esac
+ shlibpath_var=LD_LIBRARY_PATH
+ case $host_os in
+ freebsd2*)
+ shlibpath_overrides_runpath=yes
+ ;;
+ freebsd3.[[01]]* | freebsdelf3.[[01]]*)
+ shlibpath_overrides_runpath=yes
+ hardcode_into_libs=yes
+ ;;
+ freebsd3.[[2-9]]* | freebsdelf3.[[2-9]]* | \
+ freebsd4.[[0-5]] | freebsdelf4.[[0-5]] | freebsd4.1.1 | freebsdelf4.1.1)
+ shlibpath_overrides_runpath=no
+ hardcode_into_libs=yes
+ ;;
+ *) # from 4.6 on, and DragonFly
+ shlibpath_overrides_runpath=yes
+ hardcode_into_libs=yes
+ ;;
+ esac
+ ;;
+
+gnu*)
+ version_type=linux
+ need_lib_prefix=no
+ need_version=no
+ library_names_spec='${libname}${release}${shared_ext}$versuffix ${libname}${release}${shared_ext}${major} ${libname}${shared_ext}'
+ soname_spec='${libname}${release}${shared_ext}$major'
+ shlibpath_var=LD_LIBRARY_PATH
+ hardcode_into_libs=yes
+ ;;
+
+hpux9* | hpux10* | hpux11*)
+ # Give a soname corresponding to the major version so that dld.sl refuses to
+ # link against other versions.
+ version_type=sunos
+ need_lib_prefix=no
+ need_version=no
+ case $host_cpu in
+ ia64*)
+ shrext_cmds='.so'
+ hardcode_into_libs=yes
+ dynamic_linker="$host_os dld.so"
+ shlibpath_var=LD_LIBRARY_PATH
+ shlibpath_overrides_runpath=yes # Unless +noenvvar is specified.
+ library_names_spec='${libname}${release}${shared_ext}$versuffix ${libname}${release}${shared_ext}$major $libname${shared_ext}'
+ soname_spec='${libname}${release}${shared_ext}$major'
+ if test "X$HPUX_IA64_MODE" = X32; then
+ sys_lib_search_path_spec="/usr/lib/hpux32 /usr/local/lib/hpux32 /usr/local/lib"
+ else
+ sys_lib_search_path_spec="/usr/lib/hpux64 /usr/local/lib/hpux64"
+ fi
+ sys_lib_dlsearch_path_spec=$sys_lib_search_path_spec
+ ;;
+ hppa*64*)
+ shrext_cmds='.sl'
+ hardcode_into_libs=yes
+ dynamic_linker="$host_os dld.sl"
+ shlibpath_var=LD_LIBRARY_PATH # How should we handle SHLIB_PATH
+ shlibpath_overrides_runpath=yes # Unless +noenvvar is specified.
+ library_names_spec='${libname}${release}${shared_ext}$versuffix ${libname}${release}${shared_ext}$major $libname${shared_ext}'
+ soname_spec='${libname}${release}${shared_ext}$major'
+ sys_lib_search_path_spec="/usr/lib/pa20_64 /usr/ccs/lib/pa20_64"
+ sys_lib_dlsearch_path_spec=$sys_lib_search_path_spec
+ ;;
+ *)
+ shrext_cmds='.sl'
+ dynamic_linker="$host_os dld.sl"
+ shlibpath_var=SHLIB_PATH
+ shlibpath_overrides_runpath=no # +s is required to enable SHLIB_PATH
+ library_names_spec='${libname}${release}${shared_ext}$versuffix ${libname}${release}${shared_ext}$major $libname${shared_ext}'
+ soname_spec='${libname}${release}${shared_ext}$major'
+ ;;
+ esac
+ # HP-UX runs *really* slowly unless shared libraries are mode 555.
+ postinstall_cmds='chmod 555 $lib'
+ ;;
+
+interix[[3-9]]*)
+ version_type=linux
+ need_lib_prefix=no
+ need_version=no
+ library_names_spec='${libname}${release}${shared_ext}$versuffix ${libname}${release}${shared_ext}$major ${libname}${shared_ext}'
+ soname_spec='${libname}${release}${shared_ext}$major'
+ dynamic_linker='Interix 3.x ld.so.1 (PE, like ELF)'
+ shlibpath_var=LD_LIBRARY_PATH
+ shlibpath_overrides_runpath=no
+ hardcode_into_libs=yes
+ ;;
+
+irix5* | irix6* | nonstopux*)
+ case $host_os in
+ nonstopux*) version_type=nonstopux ;;
+ *)
+ if test "$lt_cv_prog_gnu_ld" = yes; then
+ version_type=linux
+ else
+ version_type=irix
+ fi ;;
+ esac
+ need_lib_prefix=no
+ need_version=no
+ soname_spec='${libname}${release}${shared_ext}$major'
+ library_names_spec='${libname}${release}${shared_ext}$versuffix ${libname}${release}${shared_ext}$major ${libname}${release}${shared_ext} $libname${shared_ext}'
+ case $host_os in
+ irix5* | nonstopux*)
+ libsuff= shlibsuff=
+ ;;
+ *)
+ case $LD in # libtool.m4 will add one of these switches to LD
+ *-32|*"-32 "|*-melf32bsmip|*"-melf32bsmip ")
+ libsuff= shlibsuff= libmagic=32-bit;;
+ *-n32|*"-n32 "|*-melf32bmipn32|*"-melf32bmipn32 ")
+ libsuff=32 shlibsuff=N32 libmagic=N32;;
+ *-64|*"-64 "|*-melf64bmip|*"-melf64bmip ")
+ libsuff=64 shlibsuff=64 libmagic=64-bit;;
+ *) libsuff= shlibsuff= libmagic=never-match;;
+ esac
+ ;;
+ esac
+ shlibpath_var=LD_LIBRARY${shlibsuff}_PATH
+ shlibpath_overrides_runpath=no
+ sys_lib_search_path_spec="/usr/lib${libsuff} /lib${libsuff} /usr/local/lib${libsuff}"
+ sys_lib_dlsearch_path_spec="/usr/lib${libsuff} /lib${libsuff}"
+ hardcode_into_libs=yes
+ ;;
+
+# No shared lib support for Linux oldld, aout, or coff.
+linux*oldld* | linux*aout* | linux*coff*)
+ dynamic_linker=no
+ ;;
+
+# This must be Linux ELF.
+linux* | k*bsd*-gnu)
+ version_type=linux
+ need_lib_prefix=no
+ need_version=no
+ library_names_spec='${libname}${release}${shared_ext}$versuffix ${libname}${release}${shared_ext}$major $libname${shared_ext}'
+ soname_spec='${libname}${release}${shared_ext}$major'
+ finish_cmds='PATH="\$PATH:/sbin" ldconfig -n $libdir'
+ shlibpath_var=LD_LIBRARY_PATH
+ shlibpath_overrides_runpath=no
+ # Some binutils ld are patched to set DT_RUNPATH
+ save_LDFLAGS=$LDFLAGS
+ save_libdir=$libdir
+ eval "libdir=/foo; wl=\"$_LT_TAGVAR(lt_prog_compiler_wl, $1)\"; \
+ LDFLAGS=\"\$LDFLAGS $_LT_TAGVAR(hardcode_libdir_flag_spec, $1)\""
+ AC_LINK_IFELSE([AC_LANG_PROGRAM([],[])],
+ [AS_IF([ ($OBJDUMP -p conftest$ac_exeext) 2>/dev/null | grep "RUNPATH.*$libdir" >/dev/null],
+ [shlibpath_overrides_runpath=yes])])
+ LDFLAGS=$save_LDFLAGS
+ libdir=$save_libdir
+
+ # This implies no fast_install, which is unacceptable.
+ # Some rework will be needed to allow for fast_install
+ # before this can be enabled.
+ hardcode_into_libs=yes
+
+ # Append ld.so.conf contents to the search path
+ if test -f /etc/ld.so.conf; then
+ lt_ld_extra=`awk '/^include / { system(sprintf("cd /etc; cat %s 2>/dev/null", \[$]2)); skip = 1; } { if (!skip) print \[$]0; skip = 0; }' < /etc/ld.so.conf | $SED -e 's/#.*//;/^[ ]*hwcap[ ]/d;s/[:, ]/ /g;s/=[^=]*$//;s/=[^= ]* / /g;/^$/d' | tr '\n' ' '`
+ sys_lib_dlsearch_path_spec="/lib /usr/lib $lt_ld_extra"
+ fi
+
+ # We used to test for /lib/ld.so.1 and disable shared libraries on
+ # powerpc, because MkLinux only supported shared libraries with the
+ # GNU dynamic linker. Since this was broken with cross compilers,
+ # most powerpc-linux boxes support dynamic linking these days and
+ # people can always --disable-shared, the test was removed, and we
+ # assume the GNU/Linux dynamic linker is in use.
+ dynamic_linker='GNU/Linux ld.so'
+ ;;
+
+netbsd*)
+ version_type=sunos
+ need_lib_prefix=no
+ need_version=no
+ if echo __ELF__ | $CC -E - | $GREP __ELF__ >/dev/null; then
+ library_names_spec='${libname}${release}${shared_ext}$versuffix ${libname}${shared_ext}$versuffix'
+ finish_cmds='PATH="\$PATH:/sbin" ldconfig -m $libdir'
+ dynamic_linker='NetBSD (a.out) ld.so'
+ else
+ library_names_spec='${libname}${release}${shared_ext}$versuffix ${libname}${release}${shared_ext}$major ${libname}${shared_ext}'
+ soname_spec='${libname}${release}${shared_ext}$major'
+ dynamic_linker='NetBSD ld.elf_so'
+ fi
+ shlibpath_var=LD_LIBRARY_PATH
+ shlibpath_overrides_runpath=yes
+ hardcode_into_libs=yes
+ ;;
+
+newsos6)
+ version_type=linux
+ library_names_spec='${libname}${release}${shared_ext}$versuffix ${libname}${release}${shared_ext}$major $libname${shared_ext}'
+ shlibpath_var=LD_LIBRARY_PATH
+ shlibpath_overrides_runpath=yes
+ ;;
+
+*nto* | *qnx*)
+ version_type=qnx
+ need_lib_prefix=no
+ need_version=no
+ library_names_spec='${libname}${release}${shared_ext}$versuffix ${libname}${release}${shared_ext}$major $libname${shared_ext}'
+ soname_spec='${libname}${release}${shared_ext}$major'
+ shlibpath_var=LD_LIBRARY_PATH
+ shlibpath_overrides_runpath=no
+ hardcode_into_libs=yes
+ dynamic_linker='ldqnx.so'
+ ;;
+
+openbsd*)
+ version_type=sunos
+ sys_lib_dlsearch_path_spec="/usr/lib"
+ need_lib_prefix=no
+ # Some older versions of OpenBSD (3.3 at least) *do* need versioned libs.
+ case $host_os in
+ openbsd3.3 | openbsd3.3.*) need_version=yes ;;
+ *) need_version=no ;;
+ esac
+ library_names_spec='${libname}${release}${shared_ext}$versuffix ${libname}${shared_ext}$versuffix'
+ finish_cmds='PATH="\$PATH:/sbin" ldconfig -m $libdir'
+ shlibpath_var=LD_LIBRARY_PATH
+ if test -z "`echo __ELF__ | $CC -E - | $GREP __ELF__`" || test "$host_os-$host_cpu" = "openbsd2.8-powerpc"; then
+ case $host_os in
+ openbsd2.[[89]] | openbsd2.[[89]].*)
+ shlibpath_overrides_runpath=no
+ ;;
+ *)
+ shlibpath_overrides_runpath=yes
+ ;;
+ esac
+ else
+ shlibpath_overrides_runpath=yes
+ fi
+ ;;
+
+os2*)
+ libname_spec='$name'
+ shrext_cmds=".dll"
+ need_lib_prefix=no
+ library_names_spec='$libname${shared_ext} $libname.a'
+ dynamic_linker='OS/2 ld.exe'
+ shlibpath_var=LIBPATH
+ ;;
+
+osf3* | osf4* | osf5*)
+ version_type=osf
+ need_lib_prefix=no
+ need_version=no
+ soname_spec='${libname}${release}${shared_ext}$major'
+ library_names_spec='${libname}${release}${shared_ext}$versuffix ${libname}${release}${shared_ext}$major $libname${shared_ext}'
+ shlibpath_var=LD_LIBRARY_PATH
+ sys_lib_search_path_spec="/usr/shlib /usr/ccs/lib /usr/lib/cmplrs/cc /usr/lib /usr/local/lib /var/shlib"
+ sys_lib_dlsearch_path_spec="$sys_lib_search_path_spec"
+ ;;
+
+rdos*)
+ dynamic_linker=no
+ ;;
+
+solaris*)
+ version_type=linux
+ need_lib_prefix=no
+ need_version=no
+ library_names_spec='${libname}${release}${shared_ext}$versuffix ${libname}${release}${shared_ext}$major $libname${shared_ext}'
+ soname_spec='${libname}${release}${shared_ext}$major'
+ shlibpath_var=LD_LIBRARY_PATH
+ shlibpath_overrides_runpath=yes
+ hardcode_into_libs=yes
+ # ldd complains unless libraries are executable
+ postinstall_cmds='chmod +x $lib'
+ ;;
+
+sunos4*)
+ version_type=sunos
+ library_names_spec='${libname}${release}${shared_ext}$versuffix ${libname}${shared_ext}$versuffix'
+ finish_cmds='PATH="\$PATH:/usr/etc" ldconfig $libdir'
+ shlibpath_var=LD_LIBRARY_PATH
+ shlibpath_overrides_runpath=yes
+ if test "$with_gnu_ld" = yes; then
+ need_lib_prefix=no
+ fi
+ need_version=yes
+ ;;
+
+sysv4 | sysv4.3*)
+ version_type=linux
+ library_names_spec='${libname}${release}${shared_ext}$versuffix ${libname}${release}${shared_ext}$major $libname${shared_ext}'
+ soname_spec='${libname}${release}${shared_ext}$major'
+ shlibpath_var=LD_LIBRARY_PATH
+ case $host_vendor in
+ sni)
+ shlibpath_overrides_runpath=no
+ need_lib_prefix=no
+ runpath_var=LD_RUN_PATH
+ ;;
+ siemens)
+ need_lib_prefix=no
+ ;;
+ motorola)
+ need_lib_prefix=no
+ need_version=no
+ shlibpath_overrides_runpath=no
+ sys_lib_search_path_spec='/lib /usr/lib /usr/ccs/lib'
+ ;;
+ esac
+ ;;
+
+sysv4*MP*)
+ if test -d /usr/nec ;then
+ version_type=linux
+ library_names_spec='$libname${shared_ext}.$versuffix $libname${shared_ext}.$major $libname${shared_ext}'
+ soname_spec='$libname${shared_ext}.$major'
+ shlibpath_var=LD_LIBRARY_PATH
+ fi
+ ;;
+
+sysv5* | sco3.2v5* | sco5v6* | unixware* | OpenUNIX* | sysv4*uw2*)
+ version_type=freebsd-elf
+ need_lib_prefix=no
+ need_version=no
+ library_names_spec='${libname}${release}${shared_ext}$versuffix ${libname}${release}${shared_ext} $libname${shared_ext}'
+ soname_spec='${libname}${release}${shared_ext}$major'
+ shlibpath_var=LD_LIBRARY_PATH
+ shlibpath_overrides_runpath=yes
+ hardcode_into_libs=yes
+ if test "$with_gnu_ld" = yes; then
+ sys_lib_search_path_spec='/usr/local/lib /usr/gnu/lib /usr/ccs/lib /usr/lib /lib'
+ else
+ sys_lib_search_path_spec='/usr/ccs/lib /usr/lib'
+ case $host_os in
+ sco3.2v5*)
+ sys_lib_search_path_spec="$sys_lib_search_path_spec /lib"
+ ;;
+ esac
+ fi
+ sys_lib_dlsearch_path_spec='/usr/lib'
+ ;;
+
+tpf*)
+ # TPF is a cross-target only. Preferred cross-host = GNU/Linux.
+ version_type=linux
+ need_lib_prefix=no
+ need_version=no
+ library_names_spec='${libname}${release}${shared_ext}$versuffix ${libname}${release}${shared_ext}$major $libname${shared_ext}'
+ shlibpath_var=LD_LIBRARY_PATH
+ shlibpath_overrides_runpath=no
+ hardcode_into_libs=yes
+ ;;
+
+uts4*)
+ version_type=linux
+ library_names_spec='${libname}${release}${shared_ext}$versuffix ${libname}${release}${shared_ext}$major $libname${shared_ext}'
+ soname_spec='${libname}${release}${shared_ext}$major'
+ shlibpath_var=LD_LIBRARY_PATH
+ ;;
+
+*)
+ dynamic_linker=no
+ ;;
+esac
+AC_MSG_RESULT([$dynamic_linker])
+test "$dynamic_linker" = no && can_build_shared=no
+
+variables_saved_for_relink="PATH $shlibpath_var $runpath_var"
+if test "$GCC" = yes; then
+ variables_saved_for_relink="$variables_saved_for_relink GCC_EXEC_PREFIX COMPILER_PATH LIBRARY_PATH"
+fi
+
+if test "${lt_cv_sys_lib_search_path_spec+set}" = set; then
+ sys_lib_search_path_spec="$lt_cv_sys_lib_search_path_spec"
+fi
+if test "${lt_cv_sys_lib_dlsearch_path_spec+set}" = set; then
+ sys_lib_dlsearch_path_spec="$lt_cv_sys_lib_dlsearch_path_spec"
+fi
+
+_LT_DECL([], [variables_saved_for_relink], [1],
+ [Variables whose values should be saved in libtool wrapper scripts and
+ restored at link time])
+_LT_DECL([], [need_lib_prefix], [0],
+ [Do we need the "lib" prefix for modules?])
+_LT_DECL([], [need_version], [0], [Do we need a version for libraries?])
+_LT_DECL([], [version_type], [0], [Library versioning type])
+_LT_DECL([], [runpath_var], [0], [Shared library runtime path variable])
+_LT_DECL([], [shlibpath_var], [0],[Shared library path variable])
+_LT_DECL([], [shlibpath_overrides_runpath], [0],
+ [Is shlibpath searched before the hard-coded library search path?])
+_LT_DECL([], [libname_spec], [1], [Format of library name prefix])
+_LT_DECL([], [library_names_spec], [1],
+ [[List of archive names. First name is the real one, the rest are links.
+ The last name is the one that the linker finds with -lNAME]])
+_LT_DECL([], [soname_spec], [1],
+ [[The coded name of the library, if different from the real name]])
+_LT_DECL([], [postinstall_cmds], [2],
+ [Command to use after installation of a shared archive])
+_LT_DECL([], [postuninstall_cmds], [2],
+ [Command to use after uninstallation of a shared archive])
+_LT_DECL([], [finish_cmds], [2],
+ [Commands used to finish a libtool library installation in a directory])
+_LT_DECL([], [finish_eval], [1],
+ [[As "finish_cmds", except a single script fragment to be evaled but
+ not shown]])
+_LT_DECL([], [hardcode_into_libs], [0],
+ [Whether we should hardcode library paths into libraries])
+_LT_DECL([], [sys_lib_search_path_spec], [2],
+ [Compile-time system search path for libraries])
+_LT_DECL([], [sys_lib_dlsearch_path_spec], [2],
+ [Run-time system search path for libraries])
+])# _LT_SYS_DYNAMIC_LINKER
+
+
+# _LT_PATH_TOOL_PREFIX(TOOL)
+# --------------------------
+# find a file program which can recognize shared library
+AC_DEFUN([_LT_PATH_TOOL_PREFIX],
+[m4_require([_LT_DECL_EGREP])dnl
+AC_MSG_CHECKING([for $1])
+AC_CACHE_VAL(lt_cv_path_MAGIC_CMD,
+[case $MAGIC_CMD in
+[[\\/*] | ?:[\\/]*])
+ lt_cv_path_MAGIC_CMD="$MAGIC_CMD" # Let the user override the test with a path.
+ ;;
+*)
+ lt_save_MAGIC_CMD="$MAGIC_CMD"
+ lt_save_ifs="$IFS"; IFS=$PATH_SEPARATOR
+dnl $ac_dummy forces splitting on constant user-supplied paths.
+dnl POSIX.2 word splitting is done only on the output of word expansions,
+dnl not every word. This closes a longstanding sh security hole.
+ ac_dummy="m4_if([$2], , $PATH, [$2])"
+ for ac_dir in $ac_dummy; do
+ IFS="$lt_save_ifs"
+ test -z "$ac_dir" && ac_dir=.
+ if test -f $ac_dir/$1; then
+ lt_cv_path_MAGIC_CMD="$ac_dir/$1"
+ if test -n "$file_magic_test_file"; then
+ case $deplibs_check_method in
+ "file_magic "*)
+ file_magic_regex=`expr "$deplibs_check_method" : "file_magic \(.*\)"`
+ MAGIC_CMD="$lt_cv_path_MAGIC_CMD"
+ if eval $file_magic_cmd \$file_magic_test_file 2> /dev/null |
+ $EGREP "$file_magic_regex" > /dev/null; then
+ :
+ else
+ cat <<_LT_EOF 1>&2
+
+*** Warning: the command libtool uses to detect shared libraries,
+*** $file_magic_cmd, produces output that libtool cannot recognize.
+*** The result is that libtool may fail to recognize shared libraries
+*** as such. This will affect the creation of libtool libraries that
+*** depend on shared libraries, but programs linked with such libtool
+*** libraries will work regardless of this problem. Nevertheless, you
+*** may want to report the problem to your system manager and/or to
+*** bug-libtool@gnu.org
+
+_LT_EOF
+ fi ;;
+ esac
+ fi
+ break
+ fi
+ done
+ IFS="$lt_save_ifs"
+ MAGIC_CMD="$lt_save_MAGIC_CMD"
+ ;;
+esac])
+MAGIC_CMD="$lt_cv_path_MAGIC_CMD"
+if test -n "$MAGIC_CMD"; then
+ AC_MSG_RESULT($MAGIC_CMD)
+else
+ AC_MSG_RESULT(no)
+fi
+_LT_DECL([], [MAGIC_CMD], [0],
+ [Used to examine libraries when file_magic_cmd begins with "file"])dnl
+])# _LT_PATH_TOOL_PREFIX
+
+# Old name:
+AU_ALIAS([AC_PATH_TOOL_PREFIX], [_LT_PATH_TOOL_PREFIX])
+dnl aclocal-1.4 backwards compatibility:
+dnl AC_DEFUN([AC_PATH_TOOL_PREFIX], [])
+
+
+# _LT_PATH_MAGIC
+# --------------
+# find a file program which can recognize a shared library
+m4_defun([_LT_PATH_MAGIC],
+[_LT_PATH_TOOL_PREFIX(${ac_tool_prefix}file, /usr/bin$PATH_SEPARATOR$PATH)
+if test -z "$lt_cv_path_MAGIC_CMD"; then
+ if test -n "$ac_tool_prefix"; then
+ _LT_PATH_TOOL_PREFIX(file, /usr/bin$PATH_SEPARATOR$PATH)
+ else
+ MAGIC_CMD=:
+ fi
+fi
+])# _LT_PATH_MAGIC
+
+
+# LT_PATH_LD
+# ----------
+# find the pathname to the GNU or non-GNU linker
+AC_DEFUN([LT_PATH_LD],
+[AC_REQUIRE([AC_PROG_CC])dnl
+AC_REQUIRE([AC_CANONICAL_HOST])dnl
+AC_REQUIRE([AC_CANONICAL_BUILD])dnl
+m4_require([_LT_DECL_SED])dnl
+m4_require([_LT_DECL_EGREP])dnl
+
+AC_ARG_WITH([gnu-ld],
+ [AS_HELP_STRING([--with-gnu-ld],
+ [assume the C compiler uses GNU ld @<:@default=no@:>@])],
+ [test "$withval" = no || with_gnu_ld=yes],
+ [with_gnu_ld=no])dnl
+
+ac_prog=ld
+if test "$GCC" = yes; then
+ # Check if gcc -print-prog-name=ld gives a path.
+ AC_MSG_CHECKING([for ld used by $CC])
+ case $host in
+ *-*-mingw*)
+ # gcc leaves a trailing carriage return which upsets mingw
+ ac_prog=`($CC -print-prog-name=ld) 2>&5 | tr -d '\015'` ;;
+ *)
+ ac_prog=`($CC -print-prog-name=ld) 2>&5` ;;
+ esac
+ case $ac_prog in
+ # Accept absolute paths.
+ [[\\/]]* | ?:[[\\/]]*)
+ re_direlt='/[[^/]][[^/]]*/\.\./'
+ # Canonicalize the pathname of ld
+ ac_prog=`$ECHO "$ac_prog"| $SED 's%\\\\%/%g'`
+ while $ECHO "$ac_prog" | $GREP "$re_direlt" > /dev/null 2>&1; do
+ ac_prog=`$ECHO $ac_prog| $SED "s%$re_direlt%/%"`
+ done
+ test -z "$LD" && LD="$ac_prog"
+ ;;
+ "")
+ # If it fails, then pretend we aren't using GCC.
+ ac_prog=ld
+ ;;
+ *)
+ # If it is relative, then search for the first ld in PATH.
+ with_gnu_ld=unknown
+ ;;
+ esac
+elif test "$with_gnu_ld" = yes; then
+ AC_MSG_CHECKING([for GNU ld])
+else
+ AC_MSG_CHECKING([for non-GNU ld])
+fi
+AC_CACHE_VAL(lt_cv_path_LD,
+[if test -z "$LD"; then
+ lt_save_ifs="$IFS"; IFS=$PATH_SEPARATOR
+ for ac_dir in $PATH; do
+ IFS="$lt_save_ifs"
+ test -z "$ac_dir" && ac_dir=.
+ if test -f "$ac_dir/$ac_prog" || test -f "$ac_dir/$ac_prog$ac_exeext"; then
+ lt_cv_path_LD="$ac_dir/$ac_prog"
+ # Check to see if the program is GNU ld. I'd rather use --version,
+ # but apparently some variants of GNU ld only accept -v.
+ # Break only if it was the GNU/non-GNU ld that we prefer.
+ case `"$lt_cv_path_LD" -v 2>&1 </dev/null` in
+ *GNU* | *'with BFD'*)
+ test "$with_gnu_ld" != no && break
+ ;;
+ *)
+ test "$with_gnu_ld" != yes && break
+ ;;
+ esac
+ fi
+ done
+ IFS="$lt_save_ifs"
+else
+ lt_cv_path_LD="$LD" # Let the user override the test with a path.
+fi])
+LD="$lt_cv_path_LD"
+if test -n "$LD"; then
+ AC_MSG_RESULT($LD)
+else
+ AC_MSG_RESULT(no)
+fi
+test -z "$LD" && AC_MSG_ERROR([no acceptable ld found in \$PATH])
+_LT_PATH_LD_GNU
+AC_SUBST([LD])
+
+_LT_TAGDECL([], [LD], [1], [The linker used to build libraries])
+])# LT_PATH_LD
+
+# Old names:
+AU_ALIAS([AM_PROG_LD], [LT_PATH_LD])
+AU_ALIAS([AC_PROG_LD], [LT_PATH_LD])
+dnl aclocal-1.4 backwards compatibility:
+dnl AC_DEFUN([AM_PROG_LD], [])
+dnl AC_DEFUN([AC_PROG_LD], [])
+
+
+# _LT_PATH_LD_GNU
+#- --------------
+m4_defun([_LT_PATH_LD_GNU],
+[AC_CACHE_CHECK([if the linker ($LD) is GNU ld], lt_cv_prog_gnu_ld,
+[# I'd rather use --version here, but apparently some GNU lds only accept -v.
+case `$LD -v 2>&1 </dev/null` in
+*GNU* | *'with BFD'*)
+ lt_cv_prog_gnu_ld=yes
+ ;;
+*)
+ lt_cv_prog_gnu_ld=no
+ ;;
+esac])
+with_gnu_ld=$lt_cv_prog_gnu_ld
+])# _LT_PATH_LD_GNU
+
+
+# _LT_CMD_RELOAD
+# --------------
+# find reload flag for linker
+# -- PORTME Some linkers may need a different reload flag.
+m4_defun([_LT_CMD_RELOAD],
+[AC_CACHE_CHECK([for $LD option to reload object files],
+ lt_cv_ld_reload_flag,
+ [lt_cv_ld_reload_flag='-r'])
+reload_flag=$lt_cv_ld_reload_flag
+case $reload_flag in
+"" | " "*) ;;
+*) reload_flag=" $reload_flag" ;;
+esac
+reload_cmds='$LD$reload_flag -o $output$reload_objs'
+case $host_os in
+ darwin*)
+ if test "$GCC" = yes; then
+ reload_cmds='$LTCC $LTCFLAGS -nostdlib ${wl}-r -o $output$reload_objs'
+ else
+ reload_cmds='$LD$reload_flag -o $output$reload_objs'
+ fi
+ ;;
+esac
+_LT_DECL([], [reload_flag], [1], [How to create reloadable object files])dnl
+_LT_DECL([], [reload_cmds], [2])dnl
+])# _LT_CMD_RELOAD
+
+
+# _LT_CHECK_MAGIC_METHOD
+# ----------------------
+# how to check for library dependencies
+# -- PORTME fill in with the dynamic library characteristics
+m4_defun([_LT_CHECK_MAGIC_METHOD],
+[m4_require([_LT_DECL_EGREP])
+m4_require([_LT_DECL_OBJDUMP])
+AC_CACHE_CHECK([how to recognize dependent libraries],
+lt_cv_deplibs_check_method,
+[lt_cv_file_magic_cmd='$MAGIC_CMD'
+lt_cv_file_magic_test_file=
+lt_cv_deplibs_check_method='unknown'
+# Need to set the preceding variable on all platforms that support
+# interlibrary dependencies.
+# 'none' -- dependencies not supported.
+# `unknown' -- same as none, but documents that we really don't know.
+# 'pass_all' -- all dependencies passed with no checks.
+# 'test_compile' -- check by making test program.
+# 'file_magic [[regex]]' -- check by looking for files in library path
+# which responds to the $file_magic_cmd with a given extended regex.
+# If you have `file' or equivalent on your system and you're not sure
+# whether `pass_all' will *always* work, you probably want this one.
+
+case $host_os in
+aix[[4-9]]*)
+ lt_cv_deplibs_check_method=pass_all
+ ;;
+
+beos*)
+ lt_cv_deplibs_check_method=pass_all
+ ;;
+
+bsdi[[45]]*)
+ lt_cv_deplibs_check_method='file_magic ELF [[0-9]][[0-9]]*-bit [[ML]]SB (shared object|dynamic lib)'
+ lt_cv_file_magic_cmd='/usr/bin/file -L'
+ lt_cv_file_magic_test_file=/shlib/libc.so
+ ;;
+
+cygwin*)
+ # func_win32_libid is a shell function defined in ltmain.sh
+ lt_cv_deplibs_check_method='file_magic ^x86 archive import|^x86 DLL'
+ lt_cv_file_magic_cmd='func_win32_libid'
+ ;;
+
+mingw* | pw32*)
+ # Base MSYS/MinGW do not provide the 'file' command needed by
+ # func_win32_libid shell function, so use a weaker test based on 'objdump',
+ # unless we find 'file', for example because we are cross-compiling.
+ if ( file / ) >/dev/null 2>&1; then
+ lt_cv_deplibs_check_method='file_magic ^x86 archive import|^x86 DLL'
+ lt_cv_file_magic_cmd='func_win32_libid'
+ else
+ lt_cv_deplibs_check_method='file_magic file format pei*-i386(.*architecture: i386)?'
+ lt_cv_file_magic_cmd='$OBJDUMP -f'
+ fi
+ ;;
+
+cegcc)
+ # use the weaker test based on 'objdump'. See mingw*.
+ lt_cv_deplibs_check_method='file_magic file format pe-arm-.*little(.*architecture: arm)?'
+ lt_cv_file_magic_cmd='$OBJDUMP -f'
+ ;;
+
+darwin* | rhapsody*)
+ lt_cv_deplibs_check_method=pass_all
+ ;;
+
+freebsd* | dragonfly*)
+ if echo __ELF__ | $CC -E - | $GREP __ELF__ > /dev/null; then
+ case $host_cpu in
+ i*86 )
+ # Not sure whether the presence of OpenBSD here was a mistake.
+ # Let's accept both of them until this is cleared up.
+ lt_cv_deplibs_check_method='file_magic (FreeBSD|OpenBSD|DragonFly)/i[[3-9]]86 (compact )?demand paged shared library'
+ lt_cv_file_magic_cmd=/usr/bin/file
+ lt_cv_file_magic_test_file=`echo /usr/lib/libc.so.*`
+ ;;
+ esac
+ else
+ lt_cv_deplibs_check_method=pass_all
+ fi
+ ;;
+
+gnu*)
+ lt_cv_deplibs_check_method=pass_all
+ ;;
+
+hpux10.20* | hpux11*)
+ lt_cv_file_magic_cmd=/usr/bin/file
+ case $host_cpu in
+ ia64*)
+ lt_cv_deplibs_check_method='file_magic (s[[0-9]][[0-9]][[0-9]]|ELF-[[0-9]][[0-9]]) shared object file - IA64'
+ lt_cv_file_magic_test_file=/usr/lib/hpux32/libc.so
+ ;;
+ hppa*64*)
+ [lt_cv_deplibs_check_method='file_magic (s[0-9][0-9][0-9]|ELF-[0-9][0-9]) shared object file - PA-RISC [0-9].[0-9]']
+ lt_cv_file_magic_test_file=/usr/lib/pa20_64/libc.sl
+ ;;
+ *)
+ lt_cv_deplibs_check_method='file_magic (s[[0-9]][[0-9]][[0-9]]|PA-RISC[[0-9]].[[0-9]]) shared library'
+ lt_cv_file_magic_test_file=/usr/lib/libc.sl
+ ;;
+ esac
+ ;;
+
+interix[[3-9]]*)
+ # PIC code is broken on Interix 3.x, that's why |\.a not |_pic\.a here
+ lt_cv_deplibs_check_method='match_pattern /lib[[^/]]+(\.so|\.a)$'
+ ;;
+
+irix5* | irix6* | nonstopux*)
+ case $LD in
+ *-32|*"-32 ") libmagic=32-bit;;
+ *-n32|*"-n32 ") libmagic=N32;;
+ *-64|*"-64 ") libmagic=64-bit;;
+ *) libmagic=never-match;;
+ esac
+ lt_cv_deplibs_check_method=pass_all
+ ;;
+
+# This must be Linux ELF.
+linux* | k*bsd*-gnu)
+ lt_cv_deplibs_check_method=pass_all
+ ;;
+
+netbsd*)
+ if echo __ELF__ | $CC -E - | $GREP __ELF__ > /dev/null; then
+ lt_cv_deplibs_check_method='match_pattern /lib[[^/]]+(\.so\.[[0-9]]+\.[[0-9]]+|_pic\.a)$'
+ else
+ lt_cv_deplibs_check_method='match_pattern /lib[[^/]]+(\.so|_pic\.a)$'
+ fi
+ ;;
+
+newos6*)
+ lt_cv_deplibs_check_method='file_magic ELF [[0-9]][[0-9]]*-bit [[ML]]SB (executable|dynamic lib)'
+ lt_cv_file_magic_cmd=/usr/bin/file
+ lt_cv_file_magic_test_file=/usr/lib/libnls.so
+ ;;
+
+*nto* | *qnx*)
+ lt_cv_deplibs_check_method=pass_all
+ ;;
+
+openbsd*)
+ if test -z "`echo __ELF__ | $CC -E - | $GREP __ELF__`" || test "$host_os-$host_cpu" = "openbsd2.8-powerpc"; then
+ lt_cv_deplibs_check_method='match_pattern /lib[[^/]]+(\.so\.[[0-9]]+\.[[0-9]]+|\.so|_pic\.a)$'
+ else
+ lt_cv_deplibs_check_method='match_pattern /lib[[^/]]+(\.so\.[[0-9]]+\.[[0-9]]+|_pic\.a)$'
+ fi
+ ;;
+
+osf3* | osf4* | osf5*)
+ lt_cv_deplibs_check_method=pass_all
+ ;;
+
+rdos*)
+ lt_cv_deplibs_check_method=pass_all
+ ;;
+
+solaris*)
+ lt_cv_deplibs_check_method=pass_all
+ ;;
+
+sysv5* | sco3.2v5* | sco5v6* | unixware* | OpenUNIX* | sysv4*uw2*)
+ lt_cv_deplibs_check_method=pass_all
+ ;;
+
+sysv4 | sysv4.3*)
+ case $host_vendor in
+ motorola)
+ lt_cv_deplibs_check_method='file_magic ELF [[0-9]][[0-9]]*-bit [[ML]]SB (shared object|dynamic lib) M[[0-9]][[0-9]]* Version [[0-9]]'
+ lt_cv_file_magic_test_file=`echo /usr/lib/libc.so*`
+ ;;
+ ncr)
+ lt_cv_deplibs_check_method=pass_all
+ ;;
+ sequent)
+ lt_cv_file_magic_cmd='/bin/file'
+ lt_cv_deplibs_check_method='file_magic ELF [[0-9]][[0-9]]*-bit [[LM]]SB (shared object|dynamic lib )'
+ ;;
+ sni)
+ lt_cv_file_magic_cmd='/bin/file'
+ lt_cv_deplibs_check_method="file_magic ELF [[0-9]][[0-9]]*-bit [[LM]]SB dynamic lib"
+ lt_cv_file_magic_test_file=/lib/libc.so
+ ;;
+ siemens)
+ lt_cv_deplibs_check_method=pass_all
+ ;;
+ pc)
+ lt_cv_deplibs_check_method=pass_all
+ ;;
+ esac
+ ;;
+
+tpf*)
+ lt_cv_deplibs_check_method=pass_all
+ ;;
+esac
+])
+file_magic_cmd=$lt_cv_file_magic_cmd
+deplibs_check_method=$lt_cv_deplibs_check_method
+test -z "$deplibs_check_method" && deplibs_check_method=unknown
+
+_LT_DECL([], [deplibs_check_method], [1],
+ [Method to check whether dependent libraries are shared objects])
+_LT_DECL([], [file_magic_cmd], [1],
+ [Command to use when deplibs_check_method == "file_magic"])
+])# _LT_CHECK_MAGIC_METHOD
+
+
+# LT_PATH_NM
+# ----------
+# find the pathname to a BSD- or MS-compatible name lister
+AC_DEFUN([LT_PATH_NM],
+[AC_REQUIRE([AC_PROG_CC])dnl
+AC_CACHE_CHECK([for BSD- or MS-compatible name lister (nm)], lt_cv_path_NM,
+[if test -n "$NM"; then
+ # Let the user override the test.
+ lt_cv_path_NM="$NM"
+else
+ lt_nm_to_check="${ac_tool_prefix}nm"
+ if test -n "$ac_tool_prefix" && test "$build" = "$host"; then
+ lt_nm_to_check="$lt_nm_to_check nm"
+ fi
+ for lt_tmp_nm in $lt_nm_to_check; do
+ lt_save_ifs="$IFS"; IFS=$PATH_SEPARATOR
+ for ac_dir in $PATH /usr/ccs/bin/elf /usr/ccs/bin /usr/ucb /bin; do
+ IFS="$lt_save_ifs"
+ test -z "$ac_dir" && ac_dir=.
+ tmp_nm="$ac_dir/$lt_tmp_nm"
+ if test -f "$tmp_nm" || test -f "$tmp_nm$ac_exeext" ; then
+ # Check to see if the nm accepts a BSD-compat flag.
+ # Adding the `sed 1q' prevents false positives on HP-UX, which says:
+ # nm: unknown option "B" ignored
+ # Tru64's nm complains that /dev/null is an invalid object file
+ case `"$tmp_nm" -B /dev/null 2>&1 | sed '1q'` in
+ */dev/null* | *'Invalid file or object type'*)
+ lt_cv_path_NM="$tmp_nm -B"
+ break
+ ;;
+ *)
+ case `"$tmp_nm" -p /dev/null 2>&1 | sed '1q'` in
+ */dev/null*)
+ lt_cv_path_NM="$tmp_nm -p"
+ break
+ ;;
+ *)
+ lt_cv_path_NM=${lt_cv_path_NM="$tmp_nm"} # keep the first match, but
+ continue # so that we can try to find one that supports BSD flags
+ ;;
+ esac
+ ;;
+ esac
+ fi
+ done
+ IFS="$lt_save_ifs"
+ done
+ : ${lt_cv_path_NM=no}
+fi])
+if test "$lt_cv_path_NM" != "no"; then
+ NM="$lt_cv_path_NM"
+else
+ # Didn't find any BSD compatible name lister, look for dumpbin.
+ AC_CHECK_TOOLS(DUMPBIN, ["dumpbin -symbols" "link -dump -symbols"], :)
+ AC_SUBST([DUMPBIN])
+ if test "$DUMPBIN" != ":"; then
+ NM="$DUMPBIN"
+ fi
+fi
+test -z "$NM" && NM=nm
+AC_SUBST([NM])
+_LT_DECL([], [NM], [1], [A BSD- or MS-compatible name lister])dnl
+
+AC_CACHE_CHECK([the name lister ($NM) interface], [lt_cv_nm_interface],
+ [lt_cv_nm_interface="BSD nm"
+ echo "int some_variable = 0;" > conftest.$ac_ext
+ (eval echo "\"\$as_me:__oline__: $ac_compile\"" >&AS_MESSAGE_LOG_FD)
+ (eval "$ac_compile" 2>conftest.err)
+ cat conftest.err >&AS_MESSAGE_LOG_FD
+ (eval echo "\"\$as_me:__oline__: $NM \\\"conftest.$ac_objext\\\"\"" >&AS_MESSAGE_LOG_FD)
+ (eval "$NM \"conftest.$ac_objext\"" 2>conftest.err > conftest.out)
+ cat conftest.err >&AS_MESSAGE_LOG_FD
+ (eval echo "\"\$as_me:__oline__: output\"" >&AS_MESSAGE_LOG_FD)
+ cat conftest.out >&AS_MESSAGE_LOG_FD
+ if $GREP 'External.*some_variable' conftest.out > /dev/null; then
+ lt_cv_nm_interface="MS dumpbin"
+ fi
+ rm -f conftest*])
+])# LT_PATH_NM
+
+# Old names:
+AU_ALIAS([AM_PROG_NM], [LT_PATH_NM])
+AU_ALIAS([AC_PROG_NM], [LT_PATH_NM])
+dnl aclocal-1.4 backwards compatibility:
+dnl AC_DEFUN([AM_PROG_NM], [])
+dnl AC_DEFUN([AC_PROG_NM], [])
+
+
+# LT_LIB_M
+# --------
+# check for math library
+AC_DEFUN([LT_LIB_M],
+[AC_REQUIRE([AC_CANONICAL_HOST])dnl
+LIBM=
+case $host in
+*-*-beos* | *-*-cygwin* | *-*-pw32* | *-*-darwin*)
+ # These system don't have libm, or don't need it
+ ;;
+*-ncr-sysv4.3*)
+ AC_CHECK_LIB(mw, _mwvalidcheckl, LIBM="-lmw")
+ AC_CHECK_LIB(m, cos, LIBM="$LIBM -lm")
+ ;;
+*)
+ AC_CHECK_LIB(m, cos, LIBM="-lm")
+ ;;
+esac
+AC_SUBST([LIBM])
+])# LT_LIB_M
+
+# Old name:
+AU_ALIAS([AC_CHECK_LIBM], [LT_LIB_M])
+dnl aclocal-1.4 backwards compatibility:
+dnl AC_DEFUN([AC_CHECK_LIBM], [])
+
+
+# _LT_COMPILER_NO_RTTI([TAGNAME])
+# -------------------------------
+m4_defun([_LT_COMPILER_NO_RTTI],
+[m4_require([_LT_TAG_COMPILER])dnl
+
+_LT_TAGVAR(lt_prog_compiler_no_builtin_flag, $1)=
+
+if test "$GCC" = yes; then
+ _LT_TAGVAR(lt_prog_compiler_no_builtin_flag, $1)=' -fno-builtin'
+
+ _LT_COMPILER_OPTION([if $compiler supports -fno-rtti -fno-exceptions],
+ lt_cv_prog_compiler_rtti_exceptions,
+ [-fno-rtti -fno-exceptions], [],
+ [_LT_TAGVAR(lt_prog_compiler_no_builtin_flag, $1)="$_LT_TAGVAR(lt_prog_compiler_no_builtin_flag, $1) -fno-rtti -fno-exceptions"])
+fi
+_LT_TAGDECL([no_builtin_flag], [lt_prog_compiler_no_builtin_flag], [1],
+ [Compiler flag to turn off builtin functions])
+])# _LT_COMPILER_NO_RTTI
+
+
+# _LT_CMD_GLOBAL_SYMBOLS
+# ----------------------
+m4_defun([_LT_CMD_GLOBAL_SYMBOLS],
+[AC_REQUIRE([AC_CANONICAL_HOST])dnl
+AC_REQUIRE([AC_PROG_CC])dnl
+AC_REQUIRE([LT_PATH_NM])dnl
+AC_REQUIRE([LT_PATH_LD])dnl
+m4_require([_LT_DECL_SED])dnl
+m4_require([_LT_DECL_EGREP])dnl
+m4_require([_LT_TAG_COMPILER])dnl
+
+# Check for command to grab the raw symbol name followed by C symbol from nm.
+AC_MSG_CHECKING([command to parse $NM output from $compiler object])
+AC_CACHE_VAL([lt_cv_sys_global_symbol_pipe],
+[
+# These are sane defaults that work on at least a few old systems.
+# [They come from Ultrix. What could be older than Ultrix?!! ;)]
+
+# Character class describing NM global symbol codes.
+symcode='[[BCDEGRST]]'
+
+# Regexp to match symbols that can be accessed directly from C.
+sympat='\([[_A-Za-z]][[_A-Za-z0-9]]*\)'
+
+# Define system-specific variables.
+case $host_os in
+aix*)
+ symcode='[[BCDT]]'
+ ;;
+cygwin* | mingw* | pw32* | cegcc*)
+ symcode='[[ABCDGISTW]]'
+ ;;
+hpux*)
+ if test "$host_cpu" = ia64; then
+ symcode='[[ABCDEGRST]]'
+ fi
+ ;;
+irix* | nonstopux*)
+ symcode='[[BCDEGRST]]'
+ ;;
+osf*)
+ symcode='[[BCDEGQRST]]'
+ ;;
+solaris*)
+ symcode='[[BDRT]]'
+ ;;
+sco3.2v5*)
+ symcode='[[DT]]'
+ ;;
+sysv4.2uw2*)
+ symcode='[[DT]]'
+ ;;
+sysv5* | sco5v6* | unixware* | OpenUNIX*)
+ symcode='[[ABDT]]'
+ ;;
+sysv4)
+ symcode='[[DFNSTU]]'
+ ;;
+esac
+
+# If we're using GNU nm, then use its standard symbol codes.
+case `$NM -V 2>&1` in
+*GNU* | *'with BFD'*)
+ symcode='[[ABCDGIRSTW]]' ;;
+esac
+
+# Transform an extracted symbol line into a proper C declaration.
+# Some systems (esp. on ia64) link data and code symbols differently,
+# so use this general approach.
+lt_cv_sys_global_symbol_to_cdecl="sed -n -e 's/^T .* \(.*\)$/extern int \1();/p' -e 's/^$symcode* .* \(.*\)$/extern char \1;/p'"
+
+# Transform an extracted symbol line into symbol name and symbol address
+lt_cv_sys_global_symbol_to_c_name_address="sed -n -e 's/^: \([[^ ]]*\) $/ {\\\"\1\\\", (void *) 0},/p' -e 's/^$symcode* \([[^ ]]*\) \([[^ ]]*\)$/ {\"\2\", (void *) \&\2},/p'"
+lt_cv_sys_global_symbol_to_c_name_address_lib_prefix="sed -n -e 's/^: \([[^ ]]*\) $/ {\\\"\1\\\", (void *) 0},/p' -e 's/^$symcode* \([[^ ]]*\) \(lib[[^ ]]*\)$/ {\"\2\", (void *) \&\2},/p' -e 's/^$symcode* \([[^ ]]*\) \([[^ ]]*\)$/ {\"lib\2\", (void *) \&\2},/p'"
+
+# Handle CRLF in mingw tool chain
+opt_cr=
+case $build_os in
+mingw*)
+ opt_cr=`$ECHO 'x\{0,1\}' | tr x '\015'` # option cr in regexp
+ ;;
+esac
+
+# Try without a prefix underscore, then with it.
+for ac_symprfx in "" "_"; do
+
+ # Transform symcode, sympat, and symprfx into a raw symbol and a C symbol.
+ symxfrm="\\1 $ac_symprfx\\2 \\2"
+
+ # Write the raw and C identifiers.
+ if test "$lt_cv_nm_interface" = "MS dumpbin"; then
+ # Fake it for dumpbin and say T for any non-static function
+ # and D for any global variable.
+ # Also find C++ and __fastcall symbols from MSVC++,
+ # which start with @ or ?.
+ lt_cv_sys_global_symbol_pipe="$AWK ['"\
+" {last_section=section; section=\$ 3};"\
+" /Section length .*#relocs.*(pick any)/{hide[last_section]=1};"\
+" \$ 0!~/External *\|/{next};"\
+" / 0+ UNDEF /{next}; / UNDEF \([^|]\)*()/{next};"\
+" {if(hide[section]) next};"\
+" {f=0}; \$ 0~/\(\).*\|/{f=1}; {printf f ? \"T \" : \"D \"};"\
+" {split(\$ 0, a, /\||\r/); split(a[2], s)};"\
+" s[1]~/^[@?]/{print s[1], s[1]; next};"\
+" s[1]~prfx {split(s[1],t,\"@\"); print t[1], substr(t[1],length(prfx))}"\
+" ' prfx=^$ac_symprfx]"
+ else
+ lt_cv_sys_global_symbol_pipe="sed -n -e 's/^.*[[ ]]\($symcode$symcode*\)[[ ]][[ ]]*$ac_symprfx$sympat$opt_cr$/$symxfrm/p'"
+ fi
+
+ # Check to see that the pipe works correctly.
+ pipe_works=no
+
+ rm -f conftest*
+ cat > conftest.$ac_ext <<_LT_EOF
+#ifdef __cplusplus
+extern "C" {
+#endif
+char nm_test_var;
+void nm_test_func(void);
+void nm_test_func(void){}
+#ifdef __cplusplus
+}
+#endif
+int main(){nm_test_var='a';nm_test_func();return(0);}
+_LT_EOF
+
+ if AC_TRY_EVAL(ac_compile); then
+ # Now try to grab the symbols.
+ nlist=conftest.nm
+ if AC_TRY_EVAL(NM conftest.$ac_objext \| $lt_cv_sys_global_symbol_pipe \> $nlist) && test -s "$nlist"; then
+ # Try sorting and uniquifying the output.
+ if sort "$nlist" | uniq > "$nlist"T; then
+ mv -f "$nlist"T "$nlist"
+ else
+ rm -f "$nlist"T
+ fi
+
+ # Make sure that we snagged all the symbols we need.
+ if $GREP ' nm_test_var$' "$nlist" >/dev/null; then
+ if $GREP ' nm_test_func$' "$nlist" >/dev/null; then
+ cat <<_LT_EOF > conftest.$ac_ext
+#ifdef __cplusplus
+extern "C" {
+#endif
+
+_LT_EOF
+ # Now generate the symbol file.
+ eval "$lt_cv_sys_global_symbol_to_cdecl"' < "$nlist" | $GREP -v main >> conftest.$ac_ext'
+
+ cat <<_LT_EOF >> conftest.$ac_ext
+
+/* The mapping between symbol names and symbols. */
+const struct {
+ const char *name;
+ void *address;
+}
+lt__PROGRAM__LTX_preloaded_symbols[[]] =
+{
+ { "@PROGRAM@", (void *) 0 },
+_LT_EOF
+ $SED "s/^$symcode$symcode* \(.*\) \(.*\)$/ {\"\2\", (void *) \&\2},/" < "$nlist" | $GREP -v main >> conftest.$ac_ext
+ cat <<\_LT_EOF >> conftest.$ac_ext
+ {0, (void *) 0}
+};
+
+/* This works around a problem in FreeBSD linker */
+#ifdef FREEBSD_WORKAROUND
+static const void *lt_preloaded_setup() {
+ return lt__PROGRAM__LTX_preloaded_symbols;
+}
+#endif
+
+#ifdef __cplusplus
+}
+#endif
+_LT_EOF
+ # Now try linking the two files.
+ mv conftest.$ac_objext conftstm.$ac_objext
+ lt_save_LIBS="$LIBS"
+ lt_save_CFLAGS="$CFLAGS"
+ LIBS="conftstm.$ac_objext"
+ CFLAGS="$CFLAGS$_LT_TAGVAR(lt_prog_compiler_no_builtin_flag, $1)"
+ if AC_TRY_EVAL(ac_link) && test -s conftest${ac_exeext}; then
+ pipe_works=yes
+ fi
+ LIBS="$lt_save_LIBS"
+ CFLAGS="$lt_save_CFLAGS"
+ else
+ echo "cannot find nm_test_func in $nlist" >&AS_MESSAGE_LOG_FD
+ fi
+ else
+ echo "cannot find nm_test_var in $nlist" >&AS_MESSAGE_LOG_FD
+ fi
+ else
+ echo "cannot run $lt_cv_sys_global_symbol_pipe" >&AS_MESSAGE_LOG_FD
+ fi
+ else
+ echo "$progname: failed program was:" >&AS_MESSAGE_LOG_FD
+ cat conftest.$ac_ext >&5
+ fi
+ rm -rf conftest* conftst*
+
+ # Do not use the global_symbol_pipe unless it works.
+ if test "$pipe_works" = yes; then
+ break
+ else
+ lt_cv_sys_global_symbol_pipe=
+ fi
+done
+])
+if test -z "$lt_cv_sys_global_symbol_pipe"; then
+ lt_cv_sys_global_symbol_to_cdecl=
+fi
+if test -z "$lt_cv_sys_global_symbol_pipe$lt_cv_sys_global_symbol_to_cdecl"; then
+ AC_MSG_RESULT(failed)
+else
+ AC_MSG_RESULT(ok)
+fi
+
+_LT_DECL([global_symbol_pipe], [lt_cv_sys_global_symbol_pipe], [1],
+ [Take the output of nm and produce a listing of raw symbols and C names])
+_LT_DECL([global_symbol_to_cdecl], [lt_cv_sys_global_symbol_to_cdecl], [1],
+ [Transform the output of nm in a proper C declaration])
+_LT_DECL([global_symbol_to_c_name_address],
+ [lt_cv_sys_global_symbol_to_c_name_address], [1],
+ [Transform the output of nm in a C name address pair])
+_LT_DECL([global_symbol_to_c_name_address_lib_prefix],
+ [lt_cv_sys_global_symbol_to_c_name_address_lib_prefix], [1],
+ [Transform the output of nm in a C name address pair when lib prefix is needed])
+]) # _LT_CMD_GLOBAL_SYMBOLS
+
+
+# _LT_COMPILER_PIC([TAGNAME])
+# ---------------------------
+m4_defun([_LT_COMPILER_PIC],
+[m4_require([_LT_TAG_COMPILER])dnl
+_LT_TAGVAR(lt_prog_compiler_wl, $1)=
+_LT_TAGVAR(lt_prog_compiler_pic, $1)=
+_LT_TAGVAR(lt_prog_compiler_static, $1)=
+
+AC_MSG_CHECKING([for $compiler option to produce PIC])
+m4_if([$1], [CXX], [
+ # C++ specific cases for pic, static, wl, etc.
+ if test "$GXX" = yes; then
+ _LT_TAGVAR(lt_prog_compiler_wl, $1)='-Wl,'
+ _LT_TAGVAR(lt_prog_compiler_static, $1)='-static'
+
+ case $host_os in
+ aix*)
+ # All AIX code is PIC.
+ if test "$host_cpu" = ia64; then
+ # AIX 5 now supports IA64 processor
+ _LT_TAGVAR(lt_prog_compiler_static, $1)='-Bstatic'
+ fi
+ ;;
+
+ amigaos*)
+ case $host_cpu in
+ powerpc)
+ # see comment about AmigaOS4 .so support
+ _LT_TAGVAR(lt_prog_compiler_pic, $1)='-fPIC'
+ ;;
+ m68k)
+ # FIXME: we need at least 68020 code to build shared libraries, but
+ # adding the `-m68020' flag to GCC prevents building anything better,
+ # like `-m68040'.
+ _LT_TAGVAR(lt_prog_compiler_pic, $1)='-m68020 -resident32 -malways-restore-a4'
+ ;;
+ esac
+ ;;
+
+ beos* | irix5* | irix6* | nonstopux* | osf3* | osf4* | osf5*)
+ # PIC is the default for these OSes.
+ ;;
+ mingw* | cygwin* | os2* | pw32* | cegcc*)
+ # This hack is so that the source file can tell whether it is being
+ # built for inclusion in a dll (and should export symbols for example).
+ # Although the cygwin gcc ignores -fPIC, still need this for old-style
+ # (--disable-auto-import) libraries
+ m4_if([$1], [GCJ], [],
+ [_LT_TAGVAR(lt_prog_compiler_pic, $1)='-DDLL_EXPORT'])
+ ;;
+ darwin* | rhapsody*)
+ # PIC is the default on this platform
+ # Common symbols not allowed in MH_DYLIB files
+ _LT_TAGVAR(lt_prog_compiler_pic, $1)='-fno-common'
+ ;;
+ *djgpp*)
+ # DJGPP does not support shared libraries at all
+ _LT_TAGVAR(lt_prog_compiler_pic, $1)=
+ ;;
+ interix[[3-9]]*)
+ # Interix 3.x gcc -fpic/-fPIC options generate broken code.
+ # Instead, we relocate shared libraries at runtime.
+ ;;
+ sysv4*MP*)
+ if test -d /usr/nec; then
+ _LT_TAGVAR(lt_prog_compiler_pic, $1)=-Kconform_pic
+ fi
+ ;;
+ hpux*)
+ # PIC is the default for 64-bit PA HP-UX, but not for 32-bit
+ # PA HP-UX. On IA64 HP-UX, PIC is the default but the pic flag
+ # sets the default TLS model and affects inlining.
+ case $host_cpu in
+ hppa*64*)
+ ;;
+ *)
+ _LT_TAGVAR(lt_prog_compiler_pic, $1)='-fPIC'
+ ;;
+ esac
+ ;;
+ *qnx* | *nto*)
+ # QNX uses GNU C++, but need to define -shared option too, otherwise
+ # it will coredump.
+ _LT_TAGVAR(lt_prog_compiler_pic, $1)='-fPIC -shared'
+ ;;
+ *)
+ _LT_TAGVAR(lt_prog_compiler_pic, $1)='-fPIC'
+ ;;
+ esac
+ else
+ case $host_os in
+ aix[[4-9]]*)
+ # All AIX code is PIC.
+ if test "$host_cpu" = ia64; then
+ # AIX 5 now supports IA64 processor
+ _LT_TAGVAR(lt_prog_compiler_static, $1)='-Bstatic'
+ else
+ _LT_TAGVAR(lt_prog_compiler_static, $1)='-bnso -bI:/lib/syscalls.exp'
+ fi
+ ;;
+ chorus*)
+ case $cc_basename in
+ cxch68*)
+ # Green Hills C++ Compiler
+ # _LT_TAGVAR(lt_prog_compiler_static, $1)="--no_auto_instantiation -u __main -u __premain -u _abort -r $COOL_DIR/lib/libOrb.a $MVME_DIR/lib/CC/libC.a $MVME_DIR/lib/classix/libcx.s.a"
+ ;;
+ esac
+ ;;
+ dgux*)
+ case $cc_basename in
+ ec++*)
+ _LT_TAGVAR(lt_prog_compiler_pic, $1)='-KPIC'
+ ;;
+ ghcx*)
+ # Green Hills C++ Compiler
+ _LT_TAGVAR(lt_prog_compiler_pic, $1)='-pic'
+ ;;
+ *)
+ ;;
+ esac
+ ;;
+ freebsd* | dragonfly*)
+ # FreeBSD uses GNU C++
+ ;;
+ hpux9* | hpux10* | hpux11*)
+ case $cc_basename in
+ CC*)
+ _LT_TAGVAR(lt_prog_compiler_wl, $1)='-Wl,'
+ _LT_TAGVAR(lt_prog_compiler_static, $1)='${wl}-a ${wl}archive'
+ if test "$host_cpu" != ia64; then
+ _LT_TAGVAR(lt_prog_compiler_pic, $1)='+Z'
+ fi
+ ;;
+ aCC*)
+ _LT_TAGVAR(lt_prog_compiler_wl, $1)='-Wl,'
+ _LT_TAGVAR(lt_prog_compiler_static, $1)='${wl}-a ${wl}archive'
+ case $host_cpu in
+ hppa*64*|ia64*)
+ # +Z the default
+ ;;
+ *)
+ _LT_TAGVAR(lt_prog_compiler_pic, $1)='+Z'
+ ;;
+ esac
+ ;;
+ *)
+ ;;
+ esac
+ ;;
+ interix*)
+ # This is c89, which is MS Visual C++ (no shared libs)
+ # Anyone wants to do a port?
+ ;;
+ irix5* | irix6* | nonstopux*)
+ case $cc_basename in
+ CC*)
+ _LT_TAGVAR(lt_prog_compiler_wl, $1)='-Wl,'
+ _LT_TAGVAR(lt_prog_compiler_static, $1)='-non_shared'
+ # CC pic flag -KPIC is the default.
+ ;;
+ *)
+ ;;
+ esac
+ ;;
+ linux* | k*bsd*-gnu)
+ case $cc_basename in
+ KCC*)
+ # KAI C++ Compiler
+ _LT_TAGVAR(lt_prog_compiler_wl, $1)='--backend -Wl,'
+ _LT_TAGVAR(lt_prog_compiler_pic, $1)='-fPIC'
+ ;;
+ ecpc* )
+ # old Intel C++ for x86_64 which still supported -KPIC.
+ _LT_TAGVAR(lt_prog_compiler_wl, $1)='-Wl,'
+ _LT_TAGVAR(lt_prog_compiler_pic, $1)='-KPIC'
+ _LT_TAGVAR(lt_prog_compiler_static, $1)='-static'
+ ;;
+ icpc* )
+ # Intel C++, used to be incompatible with GCC.
+ # ICC 10 doesn't accept -KPIC any more.
+ _LT_TAGVAR(lt_prog_compiler_wl, $1)='-Wl,'
+ _LT_TAGVAR(lt_prog_compiler_pic, $1)='-fPIC'
+ _LT_TAGVAR(lt_prog_compiler_static, $1)='-static'
+ ;;
+ pgCC* | pgcpp*)
+ # Portland Group C++ compiler
+ _LT_TAGVAR(lt_prog_compiler_wl, $1)='-Wl,'
+ _LT_TAGVAR(lt_prog_compiler_pic, $1)='-fpic'
+ _LT_TAGVAR(lt_prog_compiler_static, $1)='-Bstatic'
+ ;;
+ cxx*)
+ # Compaq C++
+ # Make sure the PIC flag is empty. It appears that all Alpha
+ # Linux and Compaq Tru64 Unix objects are PIC.
+ _LT_TAGVAR(lt_prog_compiler_pic, $1)=
+ _LT_TAGVAR(lt_prog_compiler_static, $1)='-non_shared'
+ ;;
+ xlc* | xlC*)
+ # IBM XL 8.0 on PPC
+ _LT_TAGVAR(lt_prog_compiler_wl, $1)='-Wl,'
+ _LT_TAGVAR(lt_prog_compiler_pic, $1)='-qpic'
+ _LT_TAGVAR(lt_prog_compiler_static, $1)='-qstaticlink'
+ ;;
+ *)
+ case `$CC -V 2>&1 | sed 5q` in
+ *Sun\ C*)
+ # Sun C++ 5.9
+ _LT_TAGVAR(lt_prog_compiler_pic, $1)='-KPIC'
+ _LT_TAGVAR(lt_prog_compiler_static, $1)='-Bstatic'
+ _LT_TAGVAR(lt_prog_compiler_wl, $1)='-Qoption ld '
+ ;;
+ esac
+ ;;
+ esac
+ ;;
+ lynxos*)
+ ;;
+ m88k*)
+ ;;
+ mvs*)
+ case $cc_basename in
+ cxx*)
+ _LT_TAGVAR(lt_prog_compiler_pic, $1)='-W c,exportall'
+ ;;
+ *)
+ ;;
+ esac
+ ;;
+ netbsd*)
+ ;;
+ *qnx* | *nto*)
+ # QNX uses GNU C++, but need to define -shared option too, otherwise
+ # it will coredump.
+ _LT_TAGVAR(lt_prog_compiler_pic, $1)='-fPIC -shared'
+ ;;
+ osf3* | osf4* | osf5*)
+ case $cc_basename in
+ KCC*)
+ _LT_TAGVAR(lt_prog_compiler_wl, $1)='--backend -Wl,'
+ ;;
+ RCC*)
+ # Rational C++ 2.4.1
+ _LT_TAGVAR(lt_prog_compiler_pic, $1)='-pic'
+ ;;
+ cxx*)
+ # Digital/Compaq C++
+ _LT_TAGVAR(lt_prog_compiler_wl, $1)='-Wl,'
+ # Make sure the PIC flag is empty. It appears that all Alpha
+ # Linux and Compaq Tru64 Unix objects are PIC.
+ _LT_TAGVAR(lt_prog_compiler_pic, $1)=
+ _LT_TAGVAR(lt_prog_compiler_static, $1)='-non_shared'
+ ;;
+ *)
+ ;;
+ esac
+ ;;
+ psos*)
+ ;;
+ solaris*)
+ case $cc_basename in
+ CC*)
+ # Sun C++ 4.2, 5.x and Centerline C++
+ _LT_TAGVAR(lt_prog_compiler_pic, $1)='-KPIC'
+ _LT_TAGVAR(lt_prog_compiler_static, $1)='-Bstatic'
+ _LT_TAGVAR(lt_prog_compiler_wl, $1)='-Qoption ld '
+ ;;
+ gcx*)
+ # Green Hills C++ Compiler
+ _LT_TAGVAR(lt_prog_compiler_pic, $1)='-PIC'
+ ;;
+ *)
+ ;;
+ esac
+ ;;
+ sunos4*)
+ case $cc_basename in
+ CC*)
+ # Sun C++ 4.x
+ _LT_TAGVAR(lt_prog_compiler_pic, $1)='-pic'
+ _LT_TAGVAR(lt_prog_compiler_static, $1)='-Bstatic'
+ ;;
+ lcc*)
+ # Lucid
+ _LT_TAGVAR(lt_prog_compiler_pic, $1)='-pic'
+ ;;
+ *)
+ ;;
+ esac
+ ;;
+ sysv5* | unixware* | sco3.2v5* | sco5v6* | OpenUNIX*)
+ case $cc_basename in
+ CC*)
+ _LT_TAGVAR(lt_prog_compiler_wl, $1)='-Wl,'
+ _LT_TAGVAR(lt_prog_compiler_pic, $1)='-KPIC'
+ _LT_TAGVAR(lt_prog_compiler_static, $1)='-Bstatic'
+ ;;
+ esac
+ ;;
+ tandem*)
+ case $cc_basename in
+ NCC*)
+ # NonStop-UX NCC 3.20
+ _LT_TAGVAR(lt_prog_compiler_pic, $1)='-KPIC'
+ ;;
+ *)
+ ;;
+ esac
+ ;;
+ vxworks*)
+ ;;
+ *)
+ _LT_TAGVAR(lt_prog_compiler_can_build_shared, $1)=no
+ ;;
+ esac
+ fi
+],
+[
+ if test "$GCC" = yes; then
+ _LT_TAGVAR(lt_prog_compiler_wl, $1)='-Wl,'
+ _LT_TAGVAR(lt_prog_compiler_static, $1)='-static'
+
+ case $host_os in
+ aix*)
+ # All AIX code is PIC.
+ if test "$host_cpu" = ia64; then
+ # AIX 5 now supports IA64 processor
+ _LT_TAGVAR(lt_prog_compiler_static, $1)='-Bstatic'
+ fi
+ ;;
+
+ amigaos*)
+ case $host_cpu in
+ powerpc)
+ # see comment about AmigaOS4 .so support
+ _LT_TAGVAR(lt_prog_compiler_pic, $1)='-fPIC'
+ ;;
+ m68k)
+ # FIXME: we need at least 68020 code to build shared libraries, but
+ # adding the `-m68020' flag to GCC prevents building anything better,
+ # like `-m68040'.
+ _LT_TAGVAR(lt_prog_compiler_pic, $1)='-m68020 -resident32 -malways-restore-a4'
+ ;;
+ esac
+ ;;
+
+ beos* | irix5* | irix6* | nonstopux* | osf3* | osf4* | osf5*)
+ # PIC is the default for these OSes.
+ ;;
+
+ mingw* | cygwin* | pw32* | os2* | cegcc*)
+ # This hack is so that the source file can tell whether it is being
+ # built for inclusion in a dll (and should export symbols for example).
+ # Although the cygwin gcc ignores -fPIC, still need this for old-style
+ # (--disable-auto-import) libraries
+ m4_if([$1], [GCJ], [],
+ [_LT_TAGVAR(lt_prog_compiler_pic, $1)='-DDLL_EXPORT'])
+ ;;
+
+ darwin* | rhapsody*)
+ # PIC is the default on this platform
+ # Common symbols not allowed in MH_DYLIB files
+ _LT_TAGVAR(lt_prog_compiler_pic, $1)='-fno-common'
+ ;;
+
+ hpux*)
+ # PIC is the default for 64-bit PA HP-UX, but not for 32-bit
+ # PA HP-UX. On IA64 HP-UX, PIC is the default but the pic flag
+ # sets the default TLS model and affects inlining.
+ case $host_cpu in
+ hppa*64*)
+ # +Z the default
+ ;;
+ *)
+ _LT_TAGVAR(lt_prog_compiler_pic, $1)='-fPIC'
+ ;;
+ esac
+ ;;
+
+ interix[[3-9]]*)
+ # Interix 3.x gcc -fpic/-fPIC options generate broken code.
+ # Instead, we relocate shared libraries at runtime.
+ ;;
+
+ msdosdjgpp*)
+ # Just because we use GCC doesn't mean we suddenly get shared libraries
+ # on systems that don't support them.
+ _LT_TAGVAR(lt_prog_compiler_can_build_shared, $1)=no
+ enable_shared=no
+ ;;
+
+ *nto* | *qnx*)
+ # QNX uses GNU C++, but need to define -shared option too, otherwise
+ # it will coredump.
+ _LT_TAGVAR(lt_prog_compiler_pic, $1)='-fPIC -shared'
+ ;;
+
+ sysv4*MP*)
+ if test -d /usr/nec; then
+ _LT_TAGVAR(lt_prog_compiler_pic, $1)=-Kconform_pic
+ fi
+ ;;
+
+ *)
+ _LT_TAGVAR(lt_prog_compiler_pic, $1)='-fPIC'
+ ;;
+ esac
+ else
+ # PORTME Check for flag to pass linker flags through the system compiler.
+ case $host_os in
+ aix*)
+ _LT_TAGVAR(lt_prog_compiler_wl, $1)='-Wl,'
+ if test "$host_cpu" = ia64; then
+ # AIX 5 now supports IA64 processor
+ _LT_TAGVAR(lt_prog_compiler_static, $1)='-Bstatic'
+ else
+ _LT_TAGVAR(lt_prog_compiler_static, $1)='-bnso -bI:/lib/syscalls.exp'
+ fi
+ ;;
+
+ mingw* | cygwin* | pw32* | os2* | cegcc*)
+ # This hack is so that the source file can tell whether it is being
+ # built for inclusion in a dll (and should export symbols for example).
+ m4_if([$1], [GCJ], [],
+ [_LT_TAGVAR(lt_prog_compiler_pic, $1)='-DDLL_EXPORT'])
+ ;;
+
+ hpux9* | hpux10* | hpux11*)
+ _LT_TAGVAR(lt_prog_compiler_wl, $1)='-Wl,'
+ # PIC is the default for IA64 HP-UX and 64-bit HP-UX, but
+ # not for PA HP-UX.
+ case $host_cpu in
+ hppa*64*|ia64*)
+ # +Z the default
+ ;;
+ *)
+ _LT_TAGVAR(lt_prog_compiler_pic, $1)='+Z'
+ ;;
+ esac
+ # Is there a better lt_prog_compiler_static that works with the bundled CC?
+ _LT_TAGVAR(lt_prog_compiler_static, $1)='${wl}-a ${wl}archive'
+ ;;
+
+ irix5* | irix6* | nonstopux*)
+ _LT_TAGVAR(lt_prog_compiler_wl, $1)='-Wl,'
+ # PIC (with -KPIC) is the default.
+ _LT_TAGVAR(lt_prog_compiler_static, $1)='-non_shared'
+ ;;
+
+ linux* | k*bsd*-gnu)
+ case $cc_basename in
+ # old Intel for x86_64 which still supported -KPIC.
+ ecc*)
+ _LT_TAGVAR(lt_prog_compiler_wl, $1)='-Wl,'
+ _LT_TAGVAR(lt_prog_compiler_pic, $1)='-KPIC'
+ _LT_TAGVAR(lt_prog_compiler_static, $1)='-static'
+ ;;
+ # icc used to be incompatible with GCC.
+ # ICC 10 doesn't accept -KPIC any more.
+ icc* | ifort*)
+ _LT_TAGVAR(lt_prog_compiler_wl, $1)='-Wl,'
+ _LT_TAGVAR(lt_prog_compiler_pic, $1)='-fPIC'
+ _LT_TAGVAR(lt_prog_compiler_static, $1)='-static'
+ ;;
+ # Lahey Fortran 8.1.
+ lf95*)
+ _LT_TAGVAR(lt_prog_compiler_wl, $1)='-Wl,'
+ _LT_TAGVAR(lt_prog_compiler_pic, $1)='--shared'
+ _LT_TAGVAR(lt_prog_compiler_static, $1)='--static'
+ ;;
+ pgcc* | pgf77* | pgf90* | pgf95*)
+ # Portland Group compilers (*not* the Pentium gcc compiler,
+ # which looks to be a dead project)
+ _LT_TAGVAR(lt_prog_compiler_wl, $1)='-Wl,'
+ _LT_TAGVAR(lt_prog_compiler_pic, $1)='-fpic'
+ _LT_TAGVAR(lt_prog_compiler_static, $1)='-Bstatic'
+ ;;
+ ccc*)
+ _LT_TAGVAR(lt_prog_compiler_wl, $1)='-Wl,'
+ # All Alpha code is PIC.
+ _LT_TAGVAR(lt_prog_compiler_static, $1)='-non_shared'
+ ;;
+ xl*)
+ # IBM XL C 8.0/Fortran 10.1 on PPC
+ _LT_TAGVAR(lt_prog_compiler_wl, $1)='-Wl,'
+ _LT_TAGVAR(lt_prog_compiler_pic, $1)='-qpic'
+ _LT_TAGVAR(lt_prog_compiler_static, $1)='-qstaticlink'
+ ;;
+ *)
+ case `$CC -V 2>&1 | sed 5q` in
+ *Sun\ C*)
+ # Sun C 5.9
+ _LT_TAGVAR(lt_prog_compiler_pic, $1)='-KPIC'
+ _LT_TAGVAR(lt_prog_compiler_static, $1)='-Bstatic'
+ _LT_TAGVAR(lt_prog_compiler_wl, $1)='-Wl,'
+ ;;
+ *Sun\ F*)
+ # Sun Fortran 8.3 passes all unrecognized flags to the linker
+ _LT_TAGVAR(lt_prog_compiler_pic, $1)='-KPIC'
+ _LT_TAGVAR(lt_prog_compiler_static, $1)='-Bstatic'
+ _LT_TAGVAR(lt_prog_compiler_wl, $1)=''
+ ;;
+ esac
+ ;;
+ esac
+ ;;
+
+ newsos6)
+ _LT_TAGVAR(lt_prog_compiler_pic, $1)='-KPIC'
+ _LT_TAGVAR(lt_prog_compiler_static, $1)='-Bstatic'
+ ;;
+
+ *nto* | *qnx*)
+ # QNX uses GNU C++, but need to define -shared option too, otherwise
+ # it will coredump.
+ _LT_TAGVAR(lt_prog_compiler_pic, $1)='-fPIC -shared'
+ ;;
+
+ osf3* | osf4* | osf5*)
+ _LT_TAGVAR(lt_prog_compiler_wl, $1)='-Wl,'
+ # All OSF/1 code is PIC.
+ _LT_TAGVAR(lt_prog_compiler_static, $1)='-non_shared'
+ ;;
+
+ rdos*)
+ _LT_TAGVAR(lt_prog_compiler_static, $1)='-non_shared'
+ ;;
+
+ solaris*)
+ _LT_TAGVAR(lt_prog_compiler_pic, $1)='-KPIC'
+ _LT_TAGVAR(lt_prog_compiler_static, $1)='-Bstatic'
+ case $cc_basename in
+ f77* | f90* | f95*)
+ _LT_TAGVAR(lt_prog_compiler_wl, $1)='-Qoption ld ';;
+ *)
+ _LT_TAGVAR(lt_prog_compiler_wl, $1)='-Wl,';;
+ esac
+ ;;
+
+ sunos4*)
+ _LT_TAGVAR(lt_prog_compiler_wl, $1)='-Qoption ld '
+ _LT_TAGVAR(lt_prog_compiler_pic, $1)='-PIC'
+ _LT_TAGVAR(lt_prog_compiler_static, $1)='-Bstatic'
+ ;;
+
+ sysv4 | sysv4.2uw2* | sysv4.3*)
+ _LT_TAGVAR(lt_prog_compiler_wl, $1)='-Wl,'
+ _LT_TAGVAR(lt_prog_compiler_pic, $1)='-KPIC'
+ _LT_TAGVAR(lt_prog_compiler_static, $1)='-Bstatic'
+ ;;
+
+ sysv4*MP*)
+ if test -d /usr/nec ;then
+ _LT_TAGVAR(lt_prog_compiler_pic, $1)='-Kconform_pic'
+ _LT_TAGVAR(lt_prog_compiler_static, $1)='-Bstatic'
+ fi
+ ;;
+
+ sysv5* | unixware* | sco3.2v5* | sco5v6* | OpenUNIX*)
+ _LT_TAGVAR(lt_prog_compiler_wl, $1)='-Wl,'
+ _LT_TAGVAR(lt_prog_compiler_pic, $1)='-KPIC'
+ _LT_TAGVAR(lt_prog_compiler_static, $1)='-Bstatic'
+ ;;
+
+ unicos*)
+ _LT_TAGVAR(lt_prog_compiler_wl, $1)='-Wl,'
+ _LT_TAGVAR(lt_prog_compiler_can_build_shared, $1)=no
+ ;;
+
+ uts4*)
+ _LT_TAGVAR(lt_prog_compiler_pic, $1)='-pic'
+ _LT_TAGVAR(lt_prog_compiler_static, $1)='-Bstatic'
+ ;;
+
+ *)
+ _LT_TAGVAR(lt_prog_compiler_can_build_shared, $1)=no
+ ;;
+ esac
+ fi
+])
+case $host_os in
+ # For platforms which do not support PIC, -DPIC is meaningless:
+ *djgpp*)
+ _LT_TAGVAR(lt_prog_compiler_pic, $1)=
+ ;;
+ *)
+ _LT_TAGVAR(lt_prog_compiler_pic, $1)="$_LT_TAGVAR(lt_prog_compiler_pic, $1)@&t@m4_if([$1],[],[ -DPIC],[m4_if([$1],[CXX],[ -DPIC],[])])"
+ ;;
+esac
+AC_MSG_RESULT([$_LT_TAGVAR(lt_prog_compiler_pic, $1)])
+_LT_TAGDECL([wl], [lt_prog_compiler_wl], [1],
+ [How to pass a linker flag through the compiler])
+
+#
+# Check to make sure the PIC flag actually works.
+#
+if test -n "$_LT_TAGVAR(lt_prog_compiler_pic, $1)"; then
+ _LT_COMPILER_OPTION([if $compiler PIC flag $_LT_TAGVAR(lt_prog_compiler_pic, $1) works],
+ [_LT_TAGVAR(lt_cv_prog_compiler_pic_works, $1)],
+ [$_LT_TAGVAR(lt_prog_compiler_pic, $1)@&t@m4_if([$1],[],[ -DPIC],[m4_if([$1],[CXX],[ -DPIC],[])])], [],
+ [case $_LT_TAGVAR(lt_prog_compiler_pic, $1) in
+ "" | " "*) ;;
+ *) _LT_TAGVAR(lt_prog_compiler_pic, $1)=" $_LT_TAGVAR(lt_prog_compiler_pic, $1)" ;;
+ esac],
+ [_LT_TAGVAR(lt_prog_compiler_pic, $1)=
+ _LT_TAGVAR(lt_prog_compiler_can_build_shared, $1)=no])
+fi
+_LT_TAGDECL([pic_flag], [lt_prog_compiler_pic], [1],
+ [Additional compiler flags for building library objects])
+
+#
+# Check to make sure the static flag actually works.
+#
+wl=$_LT_TAGVAR(lt_prog_compiler_wl, $1) eval lt_tmp_static_flag=\"$_LT_TAGVAR(lt_prog_compiler_static, $1)\"
+_LT_LINKER_OPTION([if $compiler static flag $lt_tmp_static_flag works],
+ _LT_TAGVAR(lt_cv_prog_compiler_static_works, $1),
+ $lt_tmp_static_flag,
+ [],
+ [_LT_TAGVAR(lt_prog_compiler_static, $1)=])
+_LT_TAGDECL([link_static_flag], [lt_prog_compiler_static], [1],
+ [Compiler flag to prevent dynamic linking])
+])# _LT_COMPILER_PIC
+
+
+# _LT_LINKER_SHLIBS([TAGNAME])
+# ----------------------------
+# See if the linker supports building shared libraries.
+m4_defun([_LT_LINKER_SHLIBS],
+[AC_REQUIRE([LT_PATH_LD])dnl
+AC_REQUIRE([LT_PATH_NM])dnl
+m4_require([_LT_FILEUTILS_DEFAULTS])dnl
+m4_require([_LT_DECL_EGREP])dnl
+m4_require([_LT_DECL_SED])dnl
+m4_require([_LT_CMD_GLOBAL_SYMBOLS])dnl
+m4_require([_LT_TAG_COMPILER])dnl
+AC_MSG_CHECKING([whether the $compiler linker ($LD) supports shared libraries])
+m4_if([$1], [CXX], [
+ _LT_TAGVAR(export_symbols_cmds, $1)='$NM $libobjs $convenience | $global_symbol_pipe | $SED '\''s/.* //'\'' | sort | uniq > $export_symbols'
+ case $host_os in
+ aix[[4-9]]*)
+ # If we're using GNU nm, then we don't want the "-C" option.
+ # -C means demangle to AIX nm, but means don't demangle with GNU nm
+ if $NM -V 2>&1 | $GREP 'GNU' > /dev/null; then
+ _LT_TAGVAR(export_symbols_cmds, $1)='$NM -Bpg $libobjs $convenience | awk '\''{ if (((\$ 2 == "T") || (\$ 2 == "D") || (\$ 2 == "B")) && ([substr](\$ 3,1,1) != ".")) { print \$ 3 } }'\'' | sort -u > $export_symbols'
+ else
+ _LT_TAGVAR(export_symbols_cmds, $1)='$NM -BCpg $libobjs $convenience | awk '\''{ if (((\$ 2 == "T") || (\$ 2 == "D") || (\$ 2 == "B")) && ([substr](\$ 3,1,1) != ".")) { print \$ 3 } }'\'' | sort -u > $export_symbols'
+ fi
+ ;;
+ pw32*)
+ _LT_TAGVAR(export_symbols_cmds, $1)="$ltdll_cmds"
+ ;;
+ cygwin* | mingw* | cegcc*)
+ _LT_TAGVAR(export_symbols_cmds, $1)='$NM $libobjs $convenience | $global_symbol_pipe | $SED -e '\''/^[[BCDGRS]][[ ]]/s/.*[[ ]]\([[^ ]]*\)/\1 DATA/;/^.*[[ ]]__nm__/s/^.*[[ ]]__nm__\([[^ ]]*\)[[ ]][[^ ]]*/\1 DATA/;/^I[[ ]]/d;/^[[AITW]][[ ]]/s/.* //'\'' | sort | uniq > $export_symbols'
+ ;;
+ *)
+ _LT_TAGVAR(export_symbols_cmds, $1)='$NM $libobjs $convenience | $global_symbol_pipe | $SED '\''s/.* //'\'' | sort | uniq > $export_symbols'
+ ;;
+ esac
+ _LT_TAGVAR(exclude_expsyms, $1)=['_GLOBAL_OFFSET_TABLE_|_GLOBAL__F[ID]_.*']
+], [
+ runpath_var=
+ _LT_TAGVAR(allow_undefined_flag, $1)=
+ _LT_TAGVAR(always_export_symbols, $1)=no
+ _LT_TAGVAR(archive_cmds, $1)=
+ _LT_TAGVAR(archive_expsym_cmds, $1)=
+ _LT_TAGVAR(compiler_needs_object, $1)=no
+ _LT_TAGVAR(enable_shared_with_static_runtimes, $1)=no
+ _LT_TAGVAR(export_dynamic_flag_spec, $1)=
+ _LT_TAGVAR(export_symbols_cmds, $1)='$NM $libobjs $convenience | $global_symbol_pipe | $SED '\''s/.* //'\'' | sort | uniq > $export_symbols'
+ _LT_TAGVAR(hardcode_automatic, $1)=no
+ _LT_TAGVAR(hardcode_direct, $1)=no
+ _LT_TAGVAR(hardcode_direct_absolute, $1)=no
+ _LT_TAGVAR(hardcode_libdir_flag_spec, $1)=
+ _LT_TAGVAR(hardcode_libdir_flag_spec_ld, $1)=
+ _LT_TAGVAR(hardcode_libdir_separator, $1)=
+ _LT_TAGVAR(hardcode_minus_L, $1)=no
+ _LT_TAGVAR(hardcode_shlibpath_var, $1)=unsupported
+ _LT_TAGVAR(inherit_rpath, $1)=no
+ _LT_TAGVAR(link_all_deplibs, $1)=unknown
+ _LT_TAGVAR(module_cmds, $1)=
+ _LT_TAGVAR(module_expsym_cmds, $1)=
+ _LT_TAGVAR(old_archive_from_new_cmds, $1)=
+ _LT_TAGVAR(old_archive_from_expsyms_cmds, $1)=
+ _LT_TAGVAR(thread_safe_flag_spec, $1)=
+ _LT_TAGVAR(whole_archive_flag_spec, $1)=
+ # include_expsyms should be a list of space-separated symbols to be *always*
+ # included in the symbol list
+ _LT_TAGVAR(include_expsyms, $1)=
+ # exclude_expsyms can be an extended regexp of symbols to exclude
+ # it will be wrapped by ` (' and `)$', so one must not match beginning or
+ # end of line. Example: `a|bc|.*d.*' will exclude the symbols `a' and `bc',
+ # as well as any symbol that contains `d'.
+ _LT_TAGVAR(exclude_expsyms, $1)=['_GLOBAL_OFFSET_TABLE_|_GLOBAL__F[ID]_.*']
+ # Although _GLOBAL_OFFSET_TABLE_ is a valid symbol C name, most a.out
+ # platforms (ab)use it in PIC code, but their linkers get confused if
+ # the symbol is explicitly referenced. Since portable code cannot
+ # rely on this symbol name, it's probably fine to never include it in
+ # preloaded symbol tables.
+ # Exclude shared library initialization/finalization symbols.
+dnl Note also adjust exclude_expsyms for C++ above.
+ extract_expsyms_cmds=
+
+ case $host_os in
+ cygwin* | mingw* | pw32* | cegcc*)
+ # FIXME: the MSVC++ port hasn't been tested in a loooong time
+ # When not using gcc, we currently assume that we are using
+ # Microsoft Visual C++.
+ if test "$GCC" != yes; then
+ with_gnu_ld=no
+ fi
+ ;;
+ interix*)
+ # we just hope/assume this is gcc and not c89 (= MSVC++)
+ with_gnu_ld=yes
+ ;;
+ openbsd*)
+ with_gnu_ld=no
+ ;;
+ esac
+
+ _LT_TAGVAR(ld_shlibs, $1)=yes
+ if test "$with_gnu_ld" = yes; then
+ # If archive_cmds runs LD, not CC, wlarc should be empty
+ wlarc='${wl}'
+
+ # Set some defaults for GNU ld with shared library support. These
+ # are reset later if shared libraries are not supported. Putting them
+ # here allows them to be overridden if necessary.
+ runpath_var=LD_RUN_PATH
+ _LT_TAGVAR(hardcode_libdir_flag_spec, $1)='${wl}-rpath ${wl}$libdir'
+ _LT_TAGVAR(export_dynamic_flag_spec, $1)='${wl}--export-dynamic'
+ # ancient GNU ld didn't support --whole-archive et. al.
+ if $LD --help 2>&1 | $GREP 'no-whole-archive' > /dev/null; then
+ _LT_TAGVAR(whole_archive_flag_spec, $1)="$wlarc"'--whole-archive$convenience '"$wlarc"'--no-whole-archive'
+ else
+ _LT_TAGVAR(whole_archive_flag_spec, $1)=
+ fi
+ supports_anon_versioning=no
+ case `$LD -v 2>&1` in
+ *\ [[01]].* | *\ 2.[[0-9]].* | *\ 2.10.*) ;; # catch versions < 2.11
+ *\ 2.11.93.0.2\ *) supports_anon_versioning=yes ;; # RH7.3 ...
+ *\ 2.11.92.0.12\ *) supports_anon_versioning=yes ;; # Mandrake 8.2 ...
+ *\ 2.11.*) ;; # other 2.11 versions
+ *) supports_anon_versioning=yes ;;
+ esac
+
+ # See if GNU ld supports shared libraries.
+ case $host_os in
+ aix[[3-9]]*)
+ # On AIX/PPC, the GNU linker is very broken
+ if test "$host_cpu" != ia64; then
+ _LT_TAGVAR(ld_shlibs, $1)=no
+ cat <<_LT_EOF 1>&2
+
+*** Warning: the GNU linker, at least up to release 2.9.1, is reported
+*** to be unable to reliably create shared libraries on AIX.
+*** Therefore, libtool is disabling shared libraries support. If you
+*** really care for shared libraries, you may want to modify your PATH
+*** so that a non-GNU linker is found, and then restart.
+
+_LT_EOF
+ fi
+ ;;
+
+ amigaos*)
+ case $host_cpu in
+ powerpc)
+ # see comment about AmigaOS4 .so support
+ _LT_TAGVAR(archive_cmds, $1)='$CC -shared $libobjs $deplibs $compiler_flags ${wl}-soname $wl$soname -o $lib'
+ _LT_TAGVAR(archive_expsym_cmds, $1)=''
+ ;;
+ m68k)
+ _LT_TAGVAR(archive_cmds, $1)='$RM $output_objdir/a2ixlibrary.data~$ECHO "#define NAME $libname" > $output_objdir/a2ixlibrary.data~$ECHO "#define LIBRARY_ID 1" >> $output_objdir/a2ixlibrary.data~$ECHO "#define VERSION $major" >> $output_objdir/a2ixlibrary.data~$ECHO "#define REVISION $revision" >> $output_objdir/a2ixlibrary.data~$AR $AR_FLAGS $lib $libobjs~$RANLIB $lib~(cd $output_objdir && a2ixlibrary -32)'
+ _LT_TAGVAR(hardcode_libdir_flag_spec, $1)='-L$libdir'
+ _LT_TAGVAR(hardcode_minus_L, $1)=yes
+ ;;
+ esac
+ ;;
+
+ beos*)
+ if $LD --help 2>&1 | $GREP ': supported targets:.* elf' > /dev/null; then
+ _LT_TAGVAR(allow_undefined_flag, $1)=unsupported
+ # Joseph Beckenbach <jrb3@best.com> says some releases of gcc
+ # support --undefined. This deserves some investigation. FIXME
+ _LT_TAGVAR(archive_cmds, $1)='$CC -nostart $libobjs $deplibs $compiler_flags ${wl}-soname $wl$soname -o $lib'
+ else
+ _LT_TAGVAR(ld_shlibs, $1)=no
+ fi
+ ;;
+
+ cygwin* | mingw* | pw32* | cegcc*)
+ # _LT_TAGVAR(hardcode_libdir_flag_spec, $1) is actually meaningless,
+ # as there is no search path for DLLs.
+ _LT_TAGVAR(hardcode_libdir_flag_spec, $1)='-L$libdir'
+ _LT_TAGVAR(allow_undefined_flag, $1)=unsupported
+ _LT_TAGVAR(always_export_symbols, $1)=no
+ _LT_TAGVAR(enable_shared_with_static_runtimes, $1)=yes
+ _LT_TAGVAR(export_symbols_cmds, $1)='$NM $libobjs $convenience | $global_symbol_pipe | $SED -e '\''/^[[BCDGRS]][[ ]]/s/.*[[ ]]\([[^ ]]*\)/\1 DATA/'\'' | $SED -e '\''/^[[AITW]][[ ]]/s/.*[[ ]]//'\'' | sort | uniq > $export_symbols'
+
+ if $LD --help 2>&1 | $GREP 'auto-import' > /dev/null; then
+ _LT_TAGVAR(archive_cmds, $1)='$CC -shared $libobjs $deplibs $compiler_flags -o $output_objdir/$soname ${wl}--enable-auto-image-base -Xlinker --out-implib -Xlinker $lib'
+ # If the export-symbols file already is a .def file (1st line
+ # is EXPORTS), use it as is; otherwise, prepend...
+ _LT_TAGVAR(archive_expsym_cmds, $1)='if test "x`$SED 1q $export_symbols`" = xEXPORTS; then
+ cp $export_symbols $output_objdir/$soname.def;
+ else
+ echo EXPORTS > $output_objdir/$soname.def;
+ cat $export_symbols >> $output_objdir/$soname.def;
+ fi~
+ $CC -shared $output_objdir/$soname.def $libobjs $deplibs $compiler_flags -o $output_objdir/$soname ${wl}--enable-auto-image-base -Xlinker --out-implib -Xlinker $lib'
+ else
+ _LT_TAGVAR(ld_shlibs, $1)=no
+ fi
+ ;;
+
+ interix[[3-9]]*)
+ _LT_TAGVAR(hardcode_direct, $1)=no
+ _LT_TAGVAR(hardcode_shlibpath_var, $1)=no
+ _LT_TAGVAR(hardcode_libdir_flag_spec, $1)='${wl}-rpath,$libdir'
+ _LT_TAGVAR(export_dynamic_flag_spec, $1)='${wl}-E'
+ # Hack: On Interix 3.x, we cannot compile PIC because of a broken gcc.
+ # Instead, shared libraries are loaded at an image base (0x10000000 by
+ # default) and relocated if they conflict, which is a slow very memory
+ # consuming and fragmenting process. To avoid this, we pick a random,
+ # 256 KiB-aligned image base between 0x50000000 and 0x6FFC0000 at link
+ # time. Moving up from 0x10000000 also allows more sbrk(2) space.
+ _LT_TAGVAR(archive_cmds, $1)='$CC -shared $pic_flag $libobjs $deplibs $compiler_flags ${wl}-h,$soname ${wl}--image-base,`expr ${RANDOM-$$} % 4096 / 2 \* 262144 + 1342177280` -o $lib'
+ _LT_TAGVAR(archive_expsym_cmds, $1)='sed "s,^,_," $export_symbols >$output_objdir/$soname.expsym~$CC -shared $pic_flag $libobjs $deplibs $compiler_flags ${wl}-h,$soname ${wl}--retain-symbols-file,$output_objdir/$soname.expsym ${wl}--image-base,`expr ${RANDOM-$$} % 4096 / 2 \* 262144 + 1342177280` -o $lib'
+ ;;
+
+ gnu* | linux* | tpf* | k*bsd*-gnu)
+ tmp_diet=no
+ if test "$host_os" = linux-dietlibc; then
+ case $cc_basename in
+ diet\ *) tmp_diet=yes;; # linux-dietlibc with static linking (!diet-dyn)
+ esac
+ fi
+ if $LD --help 2>&1 | $EGREP ': supported targets:.* elf' > /dev/null \
+ && test "$tmp_diet" = no
+ then
+ tmp_addflag=
+ tmp_sharedflag='-shared'
+ case $cc_basename,$host_cpu in
+ pgcc*) # Portland Group C compiler
+ _LT_TAGVAR(whole_archive_flag_spec, $1)='${wl}--whole-archive`for conv in $convenience\"\"; do test -n \"$conv\" && new_convenience=\"$new_convenience,$conv\"; done; $ECHO \"$new_convenience\"` ${wl}--no-whole-archive'
+ tmp_addflag=' $pic_flag'
+ ;;
+ pgf77* | pgf90* | pgf95*) # Portland Group f77 and f90 compilers
+ _LT_TAGVAR(whole_archive_flag_spec, $1)='${wl}--whole-archive`for conv in $convenience\"\"; do test -n \"$conv\" && new_convenience=\"$new_convenience,$conv\"; done; $ECHO \"$new_convenience\"` ${wl}--no-whole-archive'
+ tmp_addflag=' $pic_flag -Mnomain' ;;
+ ecc*,ia64* | icc*,ia64*) # Intel C compiler on ia64
+ tmp_addflag=' -i_dynamic' ;;
+ efc*,ia64* | ifort*,ia64*) # Intel Fortran compiler on ia64
+ tmp_addflag=' -i_dynamic -nofor_main' ;;
+ ifc* | ifort*) # Intel Fortran compiler
+ tmp_addflag=' -nofor_main' ;;
+ lf95*) # Lahey Fortran 8.1
+ _LT_TAGVAR(whole_archive_flag_spec, $1)=
+ tmp_sharedflag='--shared' ;;
+ xl[[cC]]*) # IBM XL C 8.0 on PPC (deal with xlf below)
+ tmp_sharedflag='-qmkshrobj'
+ tmp_addflag= ;;
+ esac
+ case `$CC -V 2>&1 | sed 5q` in
+ *Sun\ C*) # Sun C 5.9
+ _LT_TAGVAR(whole_archive_flag_spec, $1)='${wl}--whole-archive`new_convenience=; for conv in $convenience\"\"; do test -z \"$conv\" || new_convenience=\"$new_convenience,$conv\"; done; $ECHO \"$new_convenience\"` ${wl}--no-whole-archive'
+ _LT_TAGVAR(compiler_needs_object, $1)=yes
+ tmp_sharedflag='-G' ;;
+ *Sun\ F*) # Sun Fortran 8.3
+ tmp_sharedflag='-G' ;;
+ esac
+ _LT_TAGVAR(archive_cmds, $1)='$CC '"$tmp_sharedflag""$tmp_addflag"' $libobjs $deplibs $compiler_flags ${wl}-soname $wl$soname -o $lib'
+
+ if test "x$supports_anon_versioning" = xyes; then
+ _LT_TAGVAR(archive_expsym_cmds, $1)='echo "{ global:" > $output_objdir/$libname.ver~
+ cat $export_symbols | sed -e "s/\(.*\)/\1;/" >> $output_objdir/$libname.ver~
+ echo "local: *; };" >> $output_objdir/$libname.ver~
+ $CC '"$tmp_sharedflag""$tmp_addflag"' $libobjs $deplibs $compiler_flags ${wl}-soname $wl$soname ${wl}-version-script ${wl}$output_objdir/$libname.ver -o $lib'
+ fi
+
+ case $cc_basename in
+ xlf*)
+ # IBM XL Fortran 10.1 on PPC cannot create shared libs itself
+ _LT_TAGVAR(whole_archive_flag_spec, $1)='--whole-archive$convenience --no-whole-archive'
+ _LT_TAGVAR(hardcode_libdir_flag_spec, $1)=
+ _LT_TAGVAR(hardcode_libdir_flag_spec_ld, $1)='-rpath $libdir'
+ _LT_TAGVAR(archive_cmds, $1)='$LD -shared $libobjs $deplibs $compiler_flags -soname $soname -o $lib'
+ if test "x$supports_anon_versioning" = xyes; then
+ _LT_TAGVAR(archive_expsym_cmds, $1)='echo "{ global:" > $output_objdir/$libname.ver~
+ cat $export_symbols | sed -e "s/\(.*\)/\1;/" >> $output_objdir/$libname.ver~
+ echo "local: *; };" >> $output_objdir/$libname.ver~
+ $LD -shared $libobjs $deplibs $compiler_flags -soname $soname -version-script $output_objdir/$libname.ver -o $lib'
+ fi
+ ;;
+ esac
+ else
+ _LT_TAGVAR(ld_shlibs, $1)=no
+ fi
+ ;;
+
+ netbsd*)
+ if echo __ELF__ | $CC -E - | $GREP __ELF__ >/dev/null; then
+ _LT_TAGVAR(archive_cmds, $1)='$LD -Bshareable $libobjs $deplibs $linker_flags -o $lib'
+ wlarc=
+ else
+ _LT_TAGVAR(archive_cmds, $1)='$CC -shared $libobjs $deplibs $compiler_flags ${wl}-soname $wl$soname -o $lib'
+ _LT_TAGVAR(archive_expsym_cmds, $1)='$CC -shared $libobjs $deplibs $compiler_flags ${wl}-soname $wl$soname ${wl}-retain-symbols-file $wl$export_symbols -o $lib'
+ fi
+ ;;
+
+ solaris*)
+ if $LD -v 2>&1 | $GREP 'BFD 2\.8' > /dev/null; then
+ _LT_TAGVAR(ld_shlibs, $1)=no
+ cat <<_LT_EOF 1>&2
+
+*** Warning: The releases 2.8.* of the GNU linker cannot reliably
+*** create shared libraries on Solaris systems. Therefore, libtool
+*** is disabling shared libraries support. We urge you to upgrade GNU
+*** binutils to release 2.9.1 or newer. Another option is to modify
+*** your PATH or compiler configuration so that the native linker is
+*** used, and then restart.
+
+_LT_EOF
+ elif $LD --help 2>&1 | $GREP ': supported targets:.* elf' > /dev/null; then
+ _LT_TAGVAR(archive_cmds, $1)='$CC -shared $libobjs $deplibs $compiler_flags ${wl}-soname $wl$soname -o $lib'
+ _LT_TAGVAR(archive_expsym_cmds, $1)='$CC -shared $libobjs $deplibs $compiler_flags ${wl}-soname $wl$soname ${wl}-retain-symbols-file $wl$export_symbols -o $lib'
+ else
+ _LT_TAGVAR(ld_shlibs, $1)=no
+ fi
+ ;;
+
+ sysv5* | sco3.2v5* | sco5v6* | unixware* | OpenUNIX*)
+ case `$LD -v 2>&1` in
+ *\ [[01]].* | *\ 2.[[0-9]].* | *\ 2.1[[0-5]].*)
+ _LT_TAGVAR(ld_shlibs, $1)=no
+ cat <<_LT_EOF 1>&2
+
+*** Warning: Releases of the GNU linker prior to 2.16.91.0.3 can not
+*** reliably create shared libraries on SCO systems. Therefore, libtool
+*** is disabling shared libraries support. We urge you to upgrade GNU
+*** binutils to release 2.16.91.0.3 or newer. Another option is to modify
+*** your PATH or compiler configuration so that the native linker is
+*** used, and then restart.
+
+_LT_EOF
+ ;;
+ *)
+ # For security reasons, it is highly recommended that you always
+ # use absolute paths for naming shared libraries, and exclude the
+ # DT_RUNPATH tag from executables and libraries. But doing so
+ # requires that you compile everything twice, which is a pain.
+ if $LD --help 2>&1 | $GREP ': supported targets:.* elf' > /dev/null; then
+ _LT_TAGVAR(hardcode_libdir_flag_spec, $1)='${wl}-rpath ${wl}$libdir'
+ _LT_TAGVAR(archive_cmds, $1)='$CC -shared $libobjs $deplibs $compiler_flags ${wl}-soname $wl$soname -o $lib'
+ _LT_TAGVAR(archive_expsym_cmds, $1)='$CC -shared $libobjs $deplibs $compiler_flags ${wl}-soname $wl$soname ${wl}-retain-symbols-file $wl$export_symbols -o $lib'
+ else
+ _LT_TAGVAR(ld_shlibs, $1)=no
+ fi
+ ;;
+ esac
+ ;;
+
+ sunos4*)
+ _LT_TAGVAR(archive_cmds, $1)='$LD -assert pure-text -Bshareable -o $lib $libobjs $deplibs $linker_flags'
+ wlarc=
+ _LT_TAGVAR(hardcode_direct, $1)=yes
+ _LT_TAGVAR(hardcode_shlibpath_var, $1)=no
+ ;;
+
+ *)
+ if $LD --help 2>&1 | $GREP ': supported targets:.* elf' > /dev/null; then
+ _LT_TAGVAR(archive_cmds, $1)='$CC -shared $libobjs $deplibs $compiler_flags ${wl}-soname $wl$soname -o $lib'
+ _LT_TAGVAR(archive_expsym_cmds, $1)='$CC -shared $libobjs $deplibs $compiler_flags ${wl}-soname $wl$soname ${wl}-retain-symbols-file $wl$export_symbols -o $lib'
+ else
+ _LT_TAGVAR(ld_shlibs, $1)=no
+ fi
+ ;;
+ esac
+
+ if test "$_LT_TAGVAR(ld_shlibs, $1)" = no; then
+ runpath_var=
+ _LT_TAGVAR(hardcode_libdir_flag_spec, $1)=
+ _LT_TAGVAR(export_dynamic_flag_spec, $1)=
+ _LT_TAGVAR(whole_archive_flag_spec, $1)=
+ fi
+ else
+ # PORTME fill in a description of your system's linker (not GNU ld)
+ case $host_os in
+ aix3*)
+ _LT_TAGVAR(allow_undefined_flag, $1)=unsupported
+ _LT_TAGVAR(always_export_symbols, $1)=yes
+ _LT_TAGVAR(archive_expsym_cmds, $1)='$LD -o $output_objdir/$soname $libobjs $deplibs $linker_flags -bE:$export_symbols -T512 -H512 -bM:SRE~$AR $AR_FLAGS $lib $output_objdir/$soname'
+ # Note: this linker hardcodes the directories in LIBPATH if there
+ # are no directories specified by -L.
+ _LT_TAGVAR(hardcode_minus_L, $1)=yes
+ if test "$GCC" = yes && test -z "$lt_prog_compiler_static"; then
+ # Neither direct hardcoding nor static linking is supported with a
+ # broken collect2.
+ _LT_TAGVAR(hardcode_direct, $1)=unsupported
+ fi
+ ;;
+
+ aix[[4-9]]*)
+ if test "$host_cpu" = ia64; then
+ # On IA64, the linker does run time linking by default, so we don't
+ # have to do anything special.
+ aix_use_runtimelinking=no
+ exp_sym_flag='-Bexport'
+ no_entry_flag=""
+ else
+ # If we're using GNU nm, then we don't want the "-C" option.
+ # -C means demangle to AIX nm, but means don't demangle with GNU nm
+ if $NM -V 2>&1 | $GREP 'GNU' > /dev/null; then
+ _LT_TAGVAR(export_symbols_cmds, $1)='$NM -Bpg $libobjs $convenience | awk '\''{ if (((\$ 2 == "T") || (\$ 2 == "D") || (\$ 2 == "B")) && ([substr](\$ 3,1,1) != ".")) { print \$ 3 } }'\'' | sort -u > $export_symbols'
+ else
+ _LT_TAGVAR(export_symbols_cmds, $1)='$NM -BCpg $libobjs $convenience | awk '\''{ if (((\$ 2 == "T") || (\$ 2 == "D") || (\$ 2 == "B")) && ([substr](\$ 3,1,1) != ".")) { print \$ 3 } }'\'' | sort -u > $export_symbols'
+ fi
+ aix_use_runtimelinking=no
+
+ # Test if we are trying to use run time linking or normal
+ # AIX style linking. If -brtl is somewhere in LDFLAGS, we
+ # need to do runtime linking.
+ case $host_os in aix4.[[23]]|aix4.[[23]].*|aix[[5-9]]*)
+ for ld_flag in $LDFLAGS; do
+ if (test $ld_flag = "-brtl" || test $ld_flag = "-Wl,-brtl"); then
+ aix_use_runtimelinking=yes
+ break
+ fi
+ done
+ ;;
+ esac
+
+ exp_sym_flag='-bexport'
+ no_entry_flag='-bnoentry'
+ fi
+
+ # When large executables or shared objects are built, AIX ld can
+ # have problems creating the table of contents. If linking a library
+ # or program results in "error TOC overflow" add -mminimal-toc to
+ # CXXFLAGS/CFLAGS for g++/gcc. In the cases where that is not
+ # enough to fix the problem, add -Wl,-bbigtoc to LDFLAGS.
+
+ _LT_TAGVAR(archive_cmds, $1)=''
+ _LT_TAGVAR(hardcode_direct, $1)=yes
+ _LT_TAGVAR(hardcode_direct_absolute, $1)=yes
+ _LT_TAGVAR(hardcode_libdir_separator, $1)=':'
+ _LT_TAGVAR(link_all_deplibs, $1)=yes
+ _LT_TAGVAR(file_list_spec, $1)='${wl}-f,'
+
+ if test "$GCC" = yes; then
+ case $host_os in aix4.[[012]]|aix4.[[012]].*)
+ # We only want to do this on AIX 4.2 and lower, the check
+ # below for broken collect2 doesn't work under 4.3+
+ collect2name=`${CC} -print-prog-name=collect2`
+ if test -f "$collect2name" &&
+ strings "$collect2name" | $GREP resolve_lib_name >/dev/null
+ then
+ # We have reworked collect2
+ :
+ else
+ # We have old collect2
+ _LT_TAGVAR(hardcode_direct, $1)=unsupported
+ # It fails to find uninstalled libraries when the uninstalled
+ # path is not listed in the libpath. Setting hardcode_minus_L
+ # to unsupported forces relinking
+ _LT_TAGVAR(hardcode_minus_L, $1)=yes
+ _LT_TAGVAR(hardcode_libdir_flag_spec, $1)='-L$libdir'
+ _LT_TAGVAR(hardcode_libdir_separator, $1)=
+ fi
+ ;;
+ esac
+ shared_flag='-shared'
+ if test "$aix_use_runtimelinking" = yes; then
+ shared_flag="$shared_flag "'${wl}-G'
+ fi
+ else
+ # not using gcc
+ if test "$host_cpu" = ia64; then
+ # VisualAge C++, Version 5.5 for AIX 5L for IA-64, Beta 3 Release
+ # chokes on -Wl,-G. The following line is correct:
+ shared_flag='-G'
+ else
+ if test "$aix_use_runtimelinking" = yes; then
+ shared_flag='${wl}-G'
+ else
+ shared_flag='${wl}-bM:SRE'
+ fi
+ fi
+ fi
+
+ _LT_TAGVAR(export_dynamic_flag_spec, $1)='${wl}-bexpall'
+ # It seems that -bexpall does not export symbols beginning with
+ # underscore (_), so it is better to generate a list of symbols to export.
+ _LT_TAGVAR(always_export_symbols, $1)=yes
+ if test "$aix_use_runtimelinking" = yes; then
+ # Warning - without using the other runtime loading flags (-brtl),
+ # -berok will link without error, but may produce a broken library.
+ _LT_TAGVAR(allow_undefined_flag, $1)='-berok'
+ # Determine the default libpath from the value encoded in an
+ # empty executable.
+ _LT_SYS_MODULE_PATH_AIX
+ _LT_TAGVAR(hardcode_libdir_flag_spec, $1)='${wl}-blibpath:$libdir:'"$aix_libpath"
+ _LT_TAGVAR(archive_expsym_cmds, $1)='$CC -o $output_objdir/$soname $libobjs $deplibs '"\${wl}$no_entry_flag"' $compiler_flags `if test "x${allow_undefined_flag}" != "x"; then $ECHO "X${wl}${allow_undefined_flag}" | $Xsed; else :; fi` '"\${wl}$exp_sym_flag:\$export_symbols $shared_flag"
+ else
+ if test "$host_cpu" = ia64; then
+ _LT_TAGVAR(hardcode_libdir_flag_spec, $1)='${wl}-R $libdir:/usr/lib:/lib'
+ _LT_TAGVAR(allow_undefined_flag, $1)="-z nodefs"
+ _LT_TAGVAR(archive_expsym_cmds, $1)="\$CC $shared_flag"' -o $output_objdir/$soname $libobjs $deplibs '"\${wl}$no_entry_flag"' $compiler_flags ${wl}${allow_undefined_flag} '"\${wl}$exp_sym_flag:\$export_symbols"
+ else
+ # Determine the default libpath from the value encoded in an
+ # empty executable.
+ _LT_SYS_MODULE_PATH_AIX
+ _LT_TAGVAR(hardcode_libdir_flag_spec, $1)='${wl}-blibpath:$libdir:'"$aix_libpath"
+ # Warning - without using the other run time loading flags,
+ # -berok will link without error, but may produce a broken library.
+ _LT_TAGVAR(no_undefined_flag, $1)=' ${wl}-bernotok'
+ _LT_TAGVAR(allow_undefined_flag, $1)=' ${wl}-berok'
+ # Exported symbols can be pulled into shared objects from archives
+ _LT_TAGVAR(whole_archive_flag_spec, $1)='$convenience'
+ _LT_TAGVAR(archive_cmds_need_lc, $1)=yes
+ # This is similar to how AIX traditionally builds its shared libraries.
+ _LT_TAGVAR(archive_expsym_cmds, $1)="\$CC $shared_flag"' -o $output_objdir/$soname $libobjs $deplibs ${wl}-bnoentry $compiler_flags ${wl}-bE:$export_symbols${allow_undefined_flag}~$AR $AR_FLAGS $output_objdir/$libname$release.a $output_objdir/$soname'
+ fi
+ fi
+ ;;
+
+ amigaos*)
+ case $host_cpu in
+ powerpc)
+ # see comment about AmigaOS4 .so support
+ _LT_TAGVAR(archive_cmds, $1)='$CC -shared $libobjs $deplibs $compiler_flags ${wl}-soname $wl$soname -o $lib'
+ _LT_TAGVAR(archive_expsym_cmds, $1)=''
+ ;;
+ m68k)
+ _LT_TAGVAR(archive_cmds, $1)='$RM $output_objdir/a2ixlibrary.data~$ECHO "#define NAME $libname" > $output_objdir/a2ixlibrary.data~$ECHO "#define LIBRARY_ID 1" >> $output_objdir/a2ixlibrary.data~$ECHO "#define VERSION $major" >> $output_objdir/a2ixlibrary.data~$ECHO "#define REVISION $revision" >> $output_objdir/a2ixlibrary.data~$AR $AR_FLAGS $lib $libobjs~$RANLIB $lib~(cd $output_objdir && a2ixlibrary -32)'
+ _LT_TAGVAR(hardcode_libdir_flag_spec, $1)='-L$libdir'
+ _LT_TAGVAR(hardcode_minus_L, $1)=yes
+ ;;
+ esac
+ ;;
+
+ bsdi[[45]]*)
+ _LT_TAGVAR(export_dynamic_flag_spec, $1)=-rdynamic
+ ;;
+
+ cygwin* | mingw* | pw32* | cegcc*)
+ # When not using gcc, we currently assume that we are using
+ # Microsoft Visual C++.
+ # hardcode_libdir_flag_spec is actually meaningless, as there is
+ # no search path for DLLs.
+ _LT_TAGVAR(hardcode_libdir_flag_spec, $1)=' '
+ _LT_TAGVAR(allow_undefined_flag, $1)=unsupported
+ # Tell ltmain to make .lib files, not .a files.
+ libext=lib
+ # Tell ltmain to make .dll files, not .so files.
+ shrext_cmds=".dll"
+ # FIXME: Setting linknames here is a bad hack.
+ _LT_TAGVAR(archive_cmds, $1)='$CC -o $lib $libobjs $compiler_flags `$ECHO "X$deplibs" | $Xsed -e '\''s/ -lc$//'\''` -link -dll~linknames='
+ # The linker will automatically build a .lib file if we build a DLL.
+ _LT_TAGVAR(old_archive_from_new_cmds, $1)='true'
+ # FIXME: Should let the user specify the lib program.
+ _LT_TAGVAR(old_archive_cmds, $1)='lib -OUT:$oldlib$oldobjs$old_deplibs'
+ _LT_TAGVAR(fix_srcfile_path, $1)='`cygpath -w "$srcfile"`'
+ _LT_TAGVAR(enable_shared_with_static_runtimes, $1)=yes
+ ;;
+
+ darwin* | rhapsody*)
+ _LT_DARWIN_LINKER_FEATURES($1)
+ ;;
+
+ dgux*)
+ _LT_TAGVAR(archive_cmds, $1)='$LD -G -h $soname -o $lib $libobjs $deplibs $linker_flags'
+ _LT_TAGVAR(hardcode_libdir_flag_spec, $1)='-L$libdir'
+ _LT_TAGVAR(hardcode_shlibpath_var, $1)=no
+ ;;
+
+ freebsd1*)
+ _LT_TAGVAR(ld_shlibs, $1)=no
+ ;;
+
+ # FreeBSD 2.2.[012] allows us to include c++rt0.o to get C++ constructor
+ # support. Future versions do this automatically, but an explicit c++rt0.o
+ # does not break anything, and helps significantly (at the cost of a little
+ # extra space).
+ freebsd2.2*)
+ _LT_TAGVAR(archive_cmds, $1)='$LD -Bshareable -o $lib $libobjs $deplibs $linker_flags /usr/lib/c++rt0.o'
+ _LT_TAGVAR(hardcode_libdir_flag_spec, $1)='-R$libdir'
+ _LT_TAGVAR(hardcode_direct, $1)=yes
+ _LT_TAGVAR(hardcode_shlibpath_var, $1)=no
+ ;;
+
+ # Unfortunately, older versions of FreeBSD 2 do not have this feature.
+ freebsd2*)
+ _LT_TAGVAR(archive_cmds, $1)='$LD -Bshareable -o $lib $libobjs $deplibs $linker_flags'
+ _LT_TAGVAR(hardcode_direct, $1)=yes
+ _LT_TAGVAR(hardcode_minus_L, $1)=yes
+ _LT_TAGVAR(hardcode_shlibpath_var, $1)=no
+ ;;
+
+ # FreeBSD 3 and greater uses gcc -shared to do shared libraries.
+ freebsd* | dragonfly*)
+ _LT_TAGVAR(archive_cmds, $1)='$CC -shared -o $lib $libobjs $deplibs $compiler_flags'
+ _LT_TAGVAR(hardcode_libdir_flag_spec, $1)='-R$libdir'
+ _LT_TAGVAR(hardcode_direct, $1)=yes
+ _LT_TAGVAR(hardcode_shlibpath_var, $1)=no
+ ;;
+
+ hpux9*)
+ if test "$GCC" = yes; then
+ _LT_TAGVAR(archive_cmds, $1)='$RM $output_objdir/$soname~$CC -shared -fPIC ${wl}+b ${wl}$install_libdir -o $output_objdir/$soname $libobjs $deplibs $compiler_flags~test $output_objdir/$soname = $lib || mv $output_objdir/$soname $lib'
+ else
+ _LT_TAGVAR(archive_cmds, $1)='$RM $output_objdir/$soname~$LD -b +b $install_libdir -o $output_objdir/$soname $libobjs $deplibs $linker_flags~test $output_objdir/$soname = $lib || mv $output_objdir/$soname $lib'
+ fi
+ _LT_TAGVAR(hardcode_libdir_flag_spec, $1)='${wl}+b ${wl}$libdir'
+ _LT_TAGVAR(hardcode_libdir_separator, $1)=:
+ _LT_TAGVAR(hardcode_direct, $1)=yes
+
+ # hardcode_minus_L: Not really in the search PATH,
+ # but as the default location of the library.
+ _LT_TAGVAR(hardcode_minus_L, $1)=yes
+ _LT_TAGVAR(export_dynamic_flag_spec, $1)='${wl}-E'
+ ;;
+
+ hpux10*)
+ if test "$GCC" = yes -a "$with_gnu_ld" = no; then
+ _LT_TAGVAR(archive_cmds, $1)='$CC -shared -fPIC ${wl}+h ${wl}$soname ${wl}+b ${wl}$install_libdir -o $lib $libobjs $deplibs $compiler_flags'
+ else
+ _LT_TAGVAR(archive_cmds, $1)='$LD -b +h $soname +b $install_libdir -o $lib $libobjs $deplibs $linker_flags'
+ fi
+ if test "$with_gnu_ld" = no; then
+ _LT_TAGVAR(hardcode_libdir_flag_spec, $1)='${wl}+b ${wl}$libdir'
+ _LT_TAGVAR(hardcode_libdir_flag_spec_ld, $1)='+b $libdir'
+ _LT_TAGVAR(hardcode_libdir_separator, $1)=:
+ _LT_TAGVAR(hardcode_direct, $1)=yes
+ _LT_TAGVAR(hardcode_direct_absolute, $1)=yes
+ _LT_TAGVAR(export_dynamic_flag_spec, $1)='${wl}-E'
+ # hardcode_minus_L: Not really in the search PATH,
+ # but as the default location of the library.
+ _LT_TAGVAR(hardcode_minus_L, $1)=yes
+ fi
+ ;;
+
+ hpux11*)
+ if test "$GCC" = yes -a "$with_gnu_ld" = no; then
+ case $host_cpu in
+ hppa*64*)
+ _LT_TAGVAR(archive_cmds, $1)='$CC -shared ${wl}+h ${wl}$soname -o $lib $libobjs $deplibs $compiler_flags'
+ ;;
+ ia64*)
+ _LT_TAGVAR(archive_cmds, $1)='$CC -shared -fPIC ${wl}+h ${wl}$soname ${wl}+nodefaultrpath -o $lib $libobjs $deplibs $compiler_flags'
+ ;;
+ *)
+ _LT_TAGVAR(archive_cmds, $1)='$CC -shared -fPIC ${wl}+h ${wl}$soname ${wl}+b ${wl}$install_libdir -o $lib $libobjs $deplibs $compiler_flags'
+ ;;
+ esac
+ else
+ case $host_cpu in
+ hppa*64*)
+ _LT_TAGVAR(archive_cmds, $1)='$CC -b ${wl}+h ${wl}$soname -o $lib $libobjs $deplibs $compiler_flags'
+ ;;
+ ia64*)
+ _LT_TAGVAR(archive_cmds, $1)='$CC -b ${wl}+h ${wl}$soname ${wl}+nodefaultrpath -o $lib $libobjs $deplibs $compiler_flags'
+ ;;
+ *)
+ _LT_TAGVAR(archive_cmds, $1)='$CC -b ${wl}+h ${wl}$soname ${wl}+b ${wl}$install_libdir -o $lib $libobjs $deplibs $compiler_flags'
+ ;;
+ esac
+ fi
+ if test "$with_gnu_ld" = no; then
+ _LT_TAGVAR(hardcode_libdir_flag_spec, $1)='${wl}+b ${wl}$libdir'
+ _LT_TAGVAR(hardcode_libdir_separator, $1)=:
+
+ case $host_cpu in
+ hppa*64*|ia64*)
+ _LT_TAGVAR(hardcode_direct, $1)=no
+ _LT_TAGVAR(hardcode_shlibpath_var, $1)=no
+ ;;
+ *)
+ _LT_TAGVAR(hardcode_direct, $1)=yes
+ _LT_TAGVAR(hardcode_direct_absolute, $1)=yes
+ _LT_TAGVAR(export_dynamic_flag_spec, $1)='${wl}-E'
+
+ # hardcode_minus_L: Not really in the search PATH,
+ # but as the default location of the library.
+ _LT_TAGVAR(hardcode_minus_L, $1)=yes
+ ;;
+ esac
+ fi
+ ;;
+
+ irix5* | irix6* | nonstopux*)
+ if test "$GCC" = yes; then
+ _LT_TAGVAR(archive_cmds, $1)='$CC -shared $libobjs $deplibs $compiler_flags ${wl}-soname ${wl}$soname `test -n "$verstring" && $ECHO "X${wl}-set_version ${wl}$verstring" | $Xsed` ${wl}-update_registry ${wl}${output_objdir}/so_locations -o $lib'
+ # Try to use the -exported_symbol ld option, if it does not
+ # work, assume that -exports_file does not work either and
+ # implicitly export all symbols.
+ save_LDFLAGS="$LDFLAGS"
+ LDFLAGS="$LDFLAGS -shared ${wl}-exported_symbol ${wl}foo ${wl}-update_registry ${wl}/dev/null"
+ AC_LINK_IFELSE(int foo(void) {},
+ _LT_TAGVAR(archive_expsym_cmds, $1)='$CC -shared $libobjs $deplibs $compiler_flags ${wl}-soname ${wl}$soname `test -n "$verstring" && $ECHO "X${wl}-set_version ${wl}$verstring" | $Xsed` ${wl}-update_registry ${wl}${output_objdir}/so_locations ${wl}-exports_file ${wl}$export_symbols -o $lib'
+ )
+ LDFLAGS="$save_LDFLAGS"
+ else
+ _LT_TAGVAR(archive_cmds, $1)='$CC -shared $libobjs $deplibs $compiler_flags -soname $soname `test -n "$verstring" && $ECHO "X-set_version $verstring" | $Xsed` -update_registry ${output_objdir}/so_locations -o $lib'
+ _LT_TAGVAR(archive_expsym_cmds, $1)='$CC -shared $libobjs $deplibs $compiler_flags -soname $soname `test -n "$verstring" && $ECHO "X-set_version $verstring" | $Xsed` -update_registry ${output_objdir}/so_locations -exports_file $export_symbols -o $lib'
+ fi
+ _LT_TAGVAR(archive_cmds_need_lc, $1)='no'
+ _LT_TAGVAR(hardcode_libdir_flag_spec, $1)='${wl}-rpath ${wl}$libdir'
+ _LT_TAGVAR(hardcode_libdir_separator, $1)=:
+ _LT_TAGVAR(inherit_rpath, $1)=yes
+ _LT_TAGVAR(link_all_deplibs, $1)=yes
+ ;;
+
+ netbsd*)
+ if echo __ELF__ | $CC -E - | $GREP __ELF__ >/dev/null; then
+ _LT_TAGVAR(archive_cmds, $1)='$LD -Bshareable -o $lib $libobjs $deplibs $linker_flags' # a.out
+ else
+ _LT_TAGVAR(archive_cmds, $1)='$LD -shared -o $lib $libobjs $deplibs $linker_flags' # ELF
+ fi
+ _LT_TAGVAR(hardcode_libdir_flag_spec, $1)='-R$libdir'
+ _LT_TAGVAR(hardcode_direct, $1)=yes
+ _LT_TAGVAR(hardcode_shlibpath_var, $1)=no
+ ;;
+
+ newsos6)
+ _LT_TAGVAR(archive_cmds, $1)='$LD -G -h $soname -o $lib $libobjs $deplibs $linker_flags'
+ _LT_TAGVAR(hardcode_direct, $1)=yes
+ _LT_TAGVAR(hardcode_libdir_flag_spec, $1)='${wl}-rpath ${wl}$libdir'
+ _LT_TAGVAR(hardcode_libdir_separator, $1)=:
+ _LT_TAGVAR(hardcode_shlibpath_var, $1)=no
+ ;;
+
+ *nto* | *qnx*)
+ ;;
+
+ openbsd*)
+ if test -f /usr/libexec/ld.so; then
+ _LT_TAGVAR(hardcode_direct, $1)=yes
+ _LT_TAGVAR(hardcode_shlibpath_var, $1)=no
+ _LT_TAGVAR(hardcode_direct_absolute, $1)=yes
+ if test -z "`echo __ELF__ | $CC -E - | $GREP __ELF__`" || test "$host_os-$host_cpu" = "openbsd2.8-powerpc"; then
+ _LT_TAGVAR(archive_cmds, $1)='$CC -shared $pic_flag -o $lib $libobjs $deplibs $compiler_flags'
+ _LT_TAGVAR(archive_expsym_cmds, $1)='$CC -shared $pic_flag -o $lib $libobjs $deplibs $compiler_flags ${wl}-retain-symbols-file,$export_symbols'
+ _LT_TAGVAR(hardcode_libdir_flag_spec, $1)='${wl}-rpath,$libdir'
+ _LT_TAGVAR(export_dynamic_flag_spec, $1)='${wl}-E'
+ else
+ case $host_os in
+ openbsd[[01]].* | openbsd2.[[0-7]] | openbsd2.[[0-7]].*)
+ _LT_TAGVAR(archive_cmds, $1)='$LD -Bshareable -o $lib $libobjs $deplibs $linker_flags'
+ _LT_TAGVAR(hardcode_libdir_flag_spec, $1)='-R$libdir'
+ ;;
+ *)
+ _LT_TAGVAR(archive_cmds, $1)='$CC -shared $pic_flag -o $lib $libobjs $deplibs $compiler_flags'
+ _LT_TAGVAR(hardcode_libdir_flag_spec, $1)='${wl}-rpath,$libdir'
+ ;;
+ esac
+ fi
+ else
+ _LT_TAGVAR(ld_shlibs, $1)=no
+ fi
+ ;;
+
+ os2*)
+ _LT_TAGVAR(hardcode_libdir_flag_spec, $1)='-L$libdir'
+ _LT_TAGVAR(hardcode_minus_L, $1)=yes
+ _LT_TAGVAR(allow_undefined_flag, $1)=unsupported
+ _LT_TAGVAR(archive_cmds, $1)='$ECHO "LIBRARY $libname INITINSTANCE" > $output_objdir/$libname.def~$ECHO "DESCRIPTION \"$libname\"" >> $output_objdir/$libname.def~$ECHO DATA >> $output_objdir/$libname.def~$ECHO " SINGLE NONSHARED" >> $output_objdir/$libname.def~$ECHO EXPORTS >> $output_objdir/$libname.def~emxexp $libobjs >> $output_objdir/$libname.def~$CC -Zdll -Zcrtdll -o $lib $libobjs $deplibs $compiler_flags $output_objdir/$libname.def'
+ _LT_TAGVAR(old_archive_from_new_cmds, $1)='emximp -o $output_objdir/$libname.a $output_objdir/$libname.def'
+ ;;
+
+ osf3*)
+ if test "$GCC" = yes; then
+ _LT_TAGVAR(allow_undefined_flag, $1)=' ${wl}-expect_unresolved ${wl}\*'
+ _LT_TAGVAR(archive_cmds, $1)='$CC -shared${allow_undefined_flag} $libobjs $deplibs $compiler_flags ${wl}-soname ${wl}$soname `test -n "$verstring" && $ECHO "X${wl}-set_version ${wl}$verstring" | $Xsed` ${wl}-update_registry ${wl}${output_objdir}/so_locations -o $lib'
+ else
+ _LT_TAGVAR(allow_undefined_flag, $1)=' -expect_unresolved \*'
+ _LT_TAGVAR(archive_cmds, $1)='$CC -shared${allow_undefined_flag} $libobjs $deplibs $compiler_flags -soname $soname `test -n "$verstring" && $ECHO "X-set_version $verstring" | $Xsed` -update_registry ${output_objdir}/so_locations -o $lib'
+ fi
+ _LT_TAGVAR(archive_cmds_need_lc, $1)='no'
+ _LT_TAGVAR(hardcode_libdir_flag_spec, $1)='${wl}-rpath ${wl}$libdir'
+ _LT_TAGVAR(hardcode_libdir_separator, $1)=:
+ ;;
+
+ osf4* | osf5*) # as osf3* with the addition of -msym flag
+ if test "$GCC" = yes; then
+ _LT_TAGVAR(allow_undefined_flag, $1)=' ${wl}-expect_unresolved ${wl}\*'
+ _LT_TAGVAR(archive_cmds, $1)='$CC -shared${allow_undefined_flag} $libobjs $deplibs $compiler_flags ${wl}-msym ${wl}-soname ${wl}$soname `test -n "$verstring" && $ECHO "X${wl}-set_version ${wl}$verstring" | $Xsed` ${wl}-update_registry ${wl}${output_objdir}/so_locations -o $lib'
+ _LT_TAGVAR(hardcode_libdir_flag_spec, $1)='${wl}-rpath ${wl}$libdir'
+ else
+ _LT_TAGVAR(allow_undefined_flag, $1)=' -expect_unresolved \*'
+ _LT_TAGVAR(archive_cmds, $1)='$CC -shared${allow_undefined_flag} $libobjs $deplibs $compiler_flags -msym -soname $soname `test -n "$verstring" && $ECHO "X-set_version $verstring" | $Xsed` -update_registry ${output_objdir}/so_locations -o $lib'
+ _LT_TAGVAR(archive_expsym_cmds, $1)='for i in `cat $export_symbols`; do printf "%s %s\\n" -exported_symbol "\$i" >> $lib.exp; done; printf "%s\\n" "-hidden">> $lib.exp~
+ $CC -shared${allow_undefined_flag} ${wl}-input ${wl}$lib.exp $compiler_flags $libobjs $deplibs -soname $soname `test -n "$verstring" && $ECHO "X-set_version $verstring" | $Xsed` -update_registry ${output_objdir}/so_locations -o $lib~$RM $lib.exp'
+
+ # Both c and cxx compiler support -rpath directly
+ _LT_TAGVAR(hardcode_libdir_flag_spec, $1)='-rpath $libdir'
+ fi
+ _LT_TAGVAR(archive_cmds_need_lc, $1)='no'
+ _LT_TAGVAR(hardcode_libdir_separator, $1)=:
+ ;;
+
+ solaris*)
+ _LT_TAGVAR(no_undefined_flag, $1)=' -z defs'
+ if test "$GCC" = yes; then
+ wlarc='${wl}'
+ _LT_TAGVAR(archive_cmds, $1)='$CC -shared ${wl}-z ${wl}text ${wl}-h ${wl}$soname -o $lib $libobjs $deplibs $compiler_flags'
+ _LT_TAGVAR(archive_expsym_cmds, $1)='echo "{ global:" > $lib.exp~cat $export_symbols | $SED -e "s/\(.*\)/\1;/" >> $lib.exp~echo "local: *; };" >> $lib.exp~
+ $CC -shared ${wl}-z ${wl}text ${wl}-M ${wl}$lib.exp ${wl}-h ${wl}$soname -o $lib $libobjs $deplibs $compiler_flags~$RM $lib.exp'
+ else
+ case `$CC -V 2>&1` in
+ *"Compilers 5.0"*)
+ wlarc=''
+ _LT_TAGVAR(archive_cmds, $1)='$LD -G${allow_undefined_flag} -h $soname -o $lib $libobjs $deplibs $linker_flags'
+ _LT_TAGVAR(archive_expsym_cmds, $1)='echo "{ global:" > $lib.exp~cat $export_symbols | $SED -e "s/\(.*\)/\1;/" >> $lib.exp~echo "local: *; };" >> $lib.exp~
+ $LD -G${allow_undefined_flag} -M $lib.exp -h $soname -o $lib $libobjs $deplibs $linker_flags~$RM $lib.exp'
+ ;;
+ *)
+ wlarc='${wl}'
+ _LT_TAGVAR(archive_cmds, $1)='$CC -G${allow_undefined_flag} -h $soname -o $lib $libobjs $deplibs $compiler_flags'
+ _LT_TAGVAR(archive_expsym_cmds, $1)='echo "{ global:" > $lib.exp~cat $export_symbols | $SED -e "s/\(.*\)/\1;/" >> $lib.exp~echo "local: *; };" >> $lib.exp~
+ $CC -G${allow_undefined_flag} -M $lib.exp -h $soname -o $lib $libobjs $deplibs $compiler_flags~$RM $lib.exp'
+ ;;
+ esac
+ fi
+ _LT_TAGVAR(hardcode_libdir_flag_spec, $1)='-R$libdir'
+ _LT_TAGVAR(hardcode_shlibpath_var, $1)=no
+ case $host_os in
+ solaris2.[[0-5]] | solaris2.[[0-5]].*) ;;
+ *)
+ # The compiler driver will combine and reorder linker options,
+ # but understands `-z linker_flag'. GCC discards it without `$wl',
+ # but is careful enough not to reorder.
+ # Supported since Solaris 2.6 (maybe 2.5.1?)
+ if test "$GCC" = yes; then
+ _LT_TAGVAR(whole_archive_flag_spec, $1)='${wl}-z ${wl}allextract$convenience ${wl}-z ${wl}defaultextract'
+ else
+ _LT_TAGVAR(whole_archive_flag_spec, $1)='-z allextract$convenience -z defaultextract'
+ fi
+ ;;
+ esac
+ _LT_TAGVAR(link_all_deplibs, $1)=yes
+ ;;
+
+ sunos4*)
+ if test "x$host_vendor" = xsequent; then
+ # Use $CC to link under sequent, because it throws in some extra .o
+ # files that make .init and .fini sections work.
+ _LT_TAGVAR(archive_cmds, $1)='$CC -G ${wl}-h $soname -o $lib $libobjs $deplibs $compiler_flags'
+ else
+ _LT_TAGVAR(archive_cmds, $1)='$LD -assert pure-text -Bstatic -o $lib $libobjs $deplibs $linker_flags'
+ fi
+ _LT_TAGVAR(hardcode_libdir_flag_spec, $1)='-L$libdir'
+ _LT_TAGVAR(hardcode_direct, $1)=yes
+ _LT_TAGVAR(hardcode_minus_L, $1)=yes
+ _LT_TAGVAR(hardcode_shlibpath_var, $1)=no
+ ;;
+
+ sysv4)
+ case $host_vendor in
+ sni)
+ _LT_TAGVAR(archive_cmds, $1)='$LD -G -h $soname -o $lib $libobjs $deplibs $linker_flags'
+ _LT_TAGVAR(hardcode_direct, $1)=yes # is this really true???
+ ;;
+ siemens)
+ ## LD is ld it makes a PLAMLIB
+ ## CC just makes a GrossModule.
+ _LT_TAGVAR(archive_cmds, $1)='$LD -G -o $lib $libobjs $deplibs $linker_flags'
+ _LT_TAGVAR(reload_cmds, $1)='$CC -r -o $output$reload_objs'
+ _LT_TAGVAR(hardcode_direct, $1)=no
+ ;;
+ motorola)
+ _LT_TAGVAR(archive_cmds, $1)='$LD -G -h $soname -o $lib $libobjs $deplibs $linker_flags'
+ _LT_TAGVAR(hardcode_direct, $1)=no #Motorola manual says yes, but my tests say they lie
+ ;;
+ esac
+ runpath_var='LD_RUN_PATH'
+ _LT_TAGVAR(hardcode_shlibpath_var, $1)=no
+ ;;
+
+ sysv4.3*)
+ _LT_TAGVAR(archive_cmds, $1)='$LD -G -h $soname -o $lib $libobjs $deplibs $linker_flags'
+ _LT_TAGVAR(hardcode_shlibpath_var, $1)=no
+ _LT_TAGVAR(export_dynamic_flag_spec, $1)='-Bexport'
+ ;;
+
+ sysv4*MP*)
+ if test -d /usr/nec; then
+ _LT_TAGVAR(archive_cmds, $1)='$LD -G -h $soname -o $lib $libobjs $deplibs $linker_flags'
+ _LT_TAGVAR(hardcode_shlibpath_var, $1)=no
+ runpath_var=LD_RUN_PATH
+ hardcode_runpath_var=yes
+ _LT_TAGVAR(ld_shlibs, $1)=yes
+ fi
+ ;;
+
+ sysv4*uw2* | sysv5OpenUNIX* | sysv5UnixWare7.[[01]].[[10]]* | unixware7* | sco3.2v5.0.[[024]]*)
+ _LT_TAGVAR(no_undefined_flag, $1)='${wl}-z,text'
+ _LT_TAGVAR(archive_cmds_need_lc, $1)=no
+ _LT_TAGVAR(hardcode_shlibpath_var, $1)=no
+ runpath_var='LD_RUN_PATH'
+
+ if test "$GCC" = yes; then
+ _LT_TAGVAR(archive_cmds, $1)='$CC -shared ${wl}-h,$soname -o $lib $libobjs $deplibs $compiler_flags'
+ _LT_TAGVAR(archive_expsym_cmds, $1)='$CC -shared ${wl}-Bexport:$export_symbols ${wl}-h,$soname -o $lib $libobjs $deplibs $compiler_flags'
+ else
+ _LT_TAGVAR(archive_cmds, $1)='$CC -G ${wl}-h,$soname -o $lib $libobjs $deplibs $compiler_flags'
+ _LT_TAGVAR(archive_expsym_cmds, $1)='$CC -G ${wl}-Bexport:$export_symbols ${wl}-h,$soname -o $lib $libobjs $deplibs $compiler_flags'
+ fi
+ ;;
+
+ sysv5* | sco3.2v5* | sco5v6*)
+ # Note: We can NOT use -z defs as we might desire, because we do not
+ # link with -lc, and that would cause any symbols used from libc to
+ # always be unresolved, which means just about no library would
+ # ever link correctly. If we're not using GNU ld we use -z text
+ # though, which does catch some bad symbols but isn't as heavy-handed
+ # as -z defs.
+ _LT_TAGVAR(no_undefined_flag, $1)='${wl}-z,text'
+ _LT_TAGVAR(allow_undefined_flag, $1)='${wl}-z,nodefs'
+ _LT_TAGVAR(archive_cmds_need_lc, $1)=no
+ _LT_TAGVAR(hardcode_shlibpath_var, $1)=no
+ _LT_TAGVAR(hardcode_libdir_flag_spec, $1)='${wl}-R,$libdir'
+ _LT_TAGVAR(hardcode_libdir_separator, $1)=':'
+ _LT_TAGVAR(link_all_deplibs, $1)=yes
+ _LT_TAGVAR(export_dynamic_flag_spec, $1)='${wl}-Bexport'
+ runpath_var='LD_RUN_PATH'
+
+ if test "$GCC" = yes; then
+ _LT_TAGVAR(archive_cmds, $1)='$CC -shared ${wl}-h,$soname -o $lib $libobjs $deplibs $compiler_flags'
+ _LT_TAGVAR(archive_expsym_cmds, $1)='$CC -shared ${wl}-Bexport:$export_symbols ${wl}-h,$soname -o $lib $libobjs $deplibs $compiler_flags'
+ else
+ _LT_TAGVAR(archive_cmds, $1)='$CC -G ${wl}-h,$soname -o $lib $libobjs $deplibs $compiler_flags'
+ _LT_TAGVAR(archive_expsym_cmds, $1)='$CC -G ${wl}-Bexport:$export_symbols ${wl}-h,$soname -o $lib $libobjs $deplibs $compiler_flags'
+ fi
+ ;;
+
+ uts4*)
+ _LT_TAGVAR(archive_cmds, $1)='$LD -G -h $soname -o $lib $libobjs $deplibs $linker_flags'
+ _LT_TAGVAR(hardcode_libdir_flag_spec, $1)='-L$libdir'
+ _LT_TAGVAR(hardcode_shlibpath_var, $1)=no
+ ;;
+
+ *)
+ _LT_TAGVAR(ld_shlibs, $1)=no
+ ;;
+ esac
+
+ if test x$host_vendor = xsni; then
+ case $host in
+ sysv4 | sysv4.2uw2* | sysv4.3* | sysv5*)
+ _LT_TAGVAR(export_dynamic_flag_spec, $1)='${wl}-Blargedynsym'
+ ;;
+ esac
+ fi
+ fi
+])
+AC_MSG_RESULT([$_LT_TAGVAR(ld_shlibs, $1)])
+test "$_LT_TAGVAR(ld_shlibs, $1)" = no && can_build_shared=no
+
+_LT_TAGVAR(with_gnu_ld, $1)=$with_gnu_ld
+
+_LT_DECL([], [libext], [0], [Old archive suffix (normally "a")])dnl
+_LT_DECL([], [shrext_cmds], [1], [Shared library suffix (normally ".so")])dnl
+_LT_DECL([], [extract_expsyms_cmds], [2],
+ [The commands to extract the exported symbol list from a shared archive])
+
+#
+# Do we need to explicitly link libc?
+#
+case "x$_LT_TAGVAR(archive_cmds_need_lc, $1)" in
+x|xyes)
+ # Assume -lc should be added
+ _LT_TAGVAR(archive_cmds_need_lc, $1)=yes
+
+ if test "$enable_shared" = yes && test "$GCC" = yes; then
+ case $_LT_TAGVAR(archive_cmds, $1) in
+ *'~'*)
+ # FIXME: we may have to deal with multi-command sequences.
+ ;;
+ '$CC '*)
+ # Test whether the compiler implicitly links with -lc since on some
+ # systems, -lgcc has to come before -lc. If gcc already passes -lc
+ # to ld, don't add -lc before -lgcc.
+ AC_MSG_CHECKING([whether -lc should be explicitly linked in])
+ $RM conftest*
+ echo "$lt_simple_compile_test_code" > conftest.$ac_ext
+
+ if AC_TRY_EVAL(ac_compile) 2>conftest.err; then
+ soname=conftest
+ lib=conftest
+ libobjs=conftest.$ac_objext
+ deplibs=
+ wl=$_LT_TAGVAR(lt_prog_compiler_wl, $1)
+ pic_flag=$_LT_TAGVAR(lt_prog_compiler_pic, $1)
+ compiler_flags=-v
+ linker_flags=-v
+ verstring=
+ output_objdir=.
+ libname=conftest
+ lt_save_allow_undefined_flag=$_LT_TAGVAR(allow_undefined_flag, $1)
+ _LT_TAGVAR(allow_undefined_flag, $1)=
+ if AC_TRY_EVAL(_LT_TAGVAR(archive_cmds, $1) 2\>\&1 \| $GREP \" -lc \" \>/dev/null 2\>\&1)
+ then
+ _LT_TAGVAR(archive_cmds_need_lc, $1)=no
+ else
+ _LT_TAGVAR(archive_cmds_need_lc, $1)=yes
+ fi
+ _LT_TAGVAR(allow_undefined_flag, $1)=$lt_save_allow_undefined_flag
+ else
+ cat conftest.err 1>&5
+ fi
+ $RM conftest*
+ AC_MSG_RESULT([$_LT_TAGVAR(archive_cmds_need_lc, $1)])
+ ;;
+ esac
+ fi
+ ;;
+esac
+
+_LT_TAGDECL([build_libtool_need_lc], [archive_cmds_need_lc], [0],
+ [Whether or not to add -lc for building shared libraries])
+_LT_TAGDECL([allow_libtool_libs_with_static_runtimes],
+ [enable_shared_with_static_runtimes], [0],
+ [Whether or not to disallow shared libs when runtime libs are static])
+_LT_TAGDECL([], [export_dynamic_flag_spec], [1],
+ [Compiler flag to allow reflexive dlopens])
+_LT_TAGDECL([], [whole_archive_flag_spec], [1],
+ [Compiler flag to generate shared objects directly from archives])
+_LT_TAGDECL([], [compiler_needs_object], [1],
+ [Whether the compiler copes with passing no objects directly])
+_LT_TAGDECL([], [old_archive_from_new_cmds], [2],
+ [Create an old-style archive from a shared archive])
+_LT_TAGDECL([], [old_archive_from_expsyms_cmds], [2],
+ [Create a temporary old-style archive to link instead of a shared archive])
+_LT_TAGDECL([], [archive_cmds], [2], [Commands used to build a shared archive])
+_LT_TAGDECL([], [archive_expsym_cmds], [2])
+_LT_TAGDECL([], [module_cmds], [2],
+ [Commands used to build a loadable module if different from building
+ a shared archive.])
+_LT_TAGDECL([], [module_expsym_cmds], [2])
+_LT_TAGDECL([], [with_gnu_ld], [1],
+ [Whether we are building with GNU ld or not])
+_LT_TAGDECL([], [allow_undefined_flag], [1],
+ [Flag that allows shared libraries with undefined symbols to be built])
+_LT_TAGDECL([], [no_undefined_flag], [1],
+ [Flag that enforces no undefined symbols])
+_LT_TAGDECL([], [hardcode_libdir_flag_spec], [1],
+ [Flag to hardcode $libdir into a binary during linking.
+ This must work even if $libdir does not exist])
+_LT_TAGDECL([], [hardcode_libdir_flag_spec_ld], [1],
+ [[If ld is used when linking, flag to hardcode $libdir into a binary
+ during linking. This must work even if $libdir does not exist]])
+_LT_TAGDECL([], [hardcode_libdir_separator], [1],
+ [Whether we need a single "-rpath" flag with a separated argument])
+_LT_TAGDECL([], [hardcode_direct], [0],
+ [Set to "yes" if using DIR/libNAME${shared_ext} during linking hardcodes
+ DIR into the resulting binary])
+_LT_TAGDECL([], [hardcode_direct_absolute], [0],
+ [Set to "yes" if using DIR/libNAME${shared_ext} during linking hardcodes
+ DIR into the resulting binary and the resulting library dependency is
+ "absolute", i.e impossible to change by setting ${shlibpath_var} if the
+ library is relocated])
+_LT_TAGDECL([], [hardcode_minus_L], [0],
+ [Set to "yes" if using the -LDIR flag during linking hardcodes DIR
+ into the resulting binary])
+_LT_TAGDECL([], [hardcode_shlibpath_var], [0],
+ [Set to "yes" if using SHLIBPATH_VAR=DIR during linking hardcodes DIR
+ into the resulting binary])
+_LT_TAGDECL([], [hardcode_automatic], [0],
+ [Set to "yes" if building a shared library automatically hardcodes DIR
+ into the library and all subsequent libraries and executables linked
+ against it])
+_LT_TAGDECL([], [inherit_rpath], [0],
+ [Set to yes if linker adds runtime paths of dependent libraries
+ to runtime path list])
+_LT_TAGDECL([], [link_all_deplibs], [0],
+ [Whether libtool must link a program against all its dependency libraries])
+_LT_TAGDECL([], [fix_srcfile_path], [1],
+ [Fix the shell variable $srcfile for the compiler])
+_LT_TAGDECL([], [always_export_symbols], [0],
+ [Set to "yes" if exported symbols are required])
+_LT_TAGDECL([], [export_symbols_cmds], [2],
+ [The commands to list exported symbols])
+_LT_TAGDECL([], [exclude_expsyms], [1],
+ [Symbols that should not be listed in the preloaded symbols])
+_LT_TAGDECL([], [include_expsyms], [1],
+ [Symbols that must always be exported])
+_LT_TAGDECL([], [prelink_cmds], [2],
+ [Commands necessary for linking programs (against libraries) with templates])
+_LT_TAGDECL([], [file_list_spec], [1],
+ [Specify filename containing input files])
+dnl FIXME: Not yet implemented
+dnl _LT_TAGDECL([], [thread_safe_flag_spec], [1],
+dnl [Compiler flag to generate thread safe objects])
+])# _LT_LINKER_SHLIBS
+
+
+# _LT_LANG_C_CONFIG([TAG])
+# ------------------------
+# Ensure that the configuration variables for a C compiler are suitably
+# defined. These variables are subsequently used by _LT_CONFIG to write
+# the compiler configuration to `libtool'.
+m4_defun([_LT_LANG_C_CONFIG],
+[m4_require([_LT_DECL_EGREP])dnl
+lt_save_CC="$CC"
+AC_LANG_PUSH(C)
+
+# Source file extension for C test sources.
+ac_ext=c
+
+# Object file extension for compiled C test sources.
+objext=o
+_LT_TAGVAR(objext, $1)=$objext
+
+# Code to be used in simple compile tests
+lt_simple_compile_test_code="int some_variable = 0;"
+
+# Code to be used in simple link tests
+lt_simple_link_test_code='int main(){return(0);}'
+
+_LT_TAG_COMPILER
+# Save the default compiler, since it gets overwritten when the other
+# tags are being tested, and _LT_TAGVAR(compiler, []) is a NOP.
+compiler_DEFAULT=$CC
+
+# save warnings/boilerplate of simple test code
+_LT_COMPILER_BOILERPLATE
+_LT_LINKER_BOILERPLATE
+
+## CAVEAT EMPTOR:
+## There is no encapsulation within the following macros, do not change
+## the running order or otherwise move them around unless you know exactly
+## what you are doing...
+if test -n "$compiler"; then
+ _LT_COMPILER_NO_RTTI($1)
+ _LT_COMPILER_PIC($1)
+ _LT_COMPILER_C_O($1)
+ _LT_COMPILER_FILE_LOCKS($1)
+ _LT_LINKER_SHLIBS($1)
+ _LT_SYS_DYNAMIC_LINKER($1)
+ _LT_LINKER_HARDCODE_LIBPATH($1)
+ LT_SYS_DLOPEN_SELF
+ _LT_CMD_STRIPLIB
+
+ # Report which library types will actually be built
+ AC_MSG_CHECKING([if libtool supports shared libraries])
+ AC_MSG_RESULT([$can_build_shared])
+
+ AC_MSG_CHECKING([whether to build shared libraries])
+ test "$can_build_shared" = "no" && enable_shared=no
+
+ # On AIX, shared libraries and static libraries use the same namespace, and
+ # are all built from PIC.
+ case $host_os in
+ aix3*)
+ test "$enable_shared" = yes && enable_static=no
+ if test -n "$RANLIB"; then
+ archive_cmds="$archive_cmds~\$RANLIB \$lib"
+ postinstall_cmds='$RANLIB $lib'
+ fi
+ ;;
+
+ aix[[4-9]]*)
+ if test "$host_cpu" != ia64 && test "$aix_use_runtimelinking" = no ; then
+ test "$enable_shared" = yes && enable_static=no
+ fi
+ ;;
+ esac
+ AC_MSG_RESULT([$enable_shared])
+
+ AC_MSG_CHECKING([whether to build static libraries])
+ # Make sure either enable_shared or enable_static is yes.
+ test "$enable_shared" = yes || enable_static=yes
+ AC_MSG_RESULT([$enable_static])
+
+ _LT_CONFIG($1)
+fi
+AC_LANG_POP
+CC="$lt_save_CC"
+])# _LT_LANG_C_CONFIG
+
+
+# _LT_PROG_CXX
+# ------------
+# Since AC_PROG_CXX is broken, in that it returns g++ if there is no c++
+# compiler, we have our own version here.
+m4_defun([_LT_PROG_CXX],
+[
+pushdef([AC_MSG_ERROR], [_lt_caught_CXX_error=yes])
+AC_PROG_CXX
+if test -n "$CXX" && ( test "X$CXX" != "Xno" &&
+ ( (test "X$CXX" = "Xg++" && `g++ -v >/dev/null 2>&1` ) ||
+ (test "X$CXX" != "Xg++"))) ; then
+ AC_PROG_CXXCPP
+else
+ _lt_caught_CXX_error=yes
+fi
+popdef([AC_MSG_ERROR])
+])# _LT_PROG_CXX
+
+dnl aclocal-1.4 backwards compatibility:
+dnl AC_DEFUN([_LT_PROG_CXX], [])
+
+
+# _LT_LANG_CXX_CONFIG([TAG])
+# --------------------------
+# Ensure that the configuration variables for a C++ compiler are suitably
+# defined. These variables are subsequently used by _LT_CONFIG to write
+# the compiler configuration to `libtool'.
+m4_defun([_LT_LANG_CXX_CONFIG],
+[AC_REQUIRE([_LT_PROG_CXX])dnl
+m4_require([_LT_FILEUTILS_DEFAULTS])dnl
+m4_require([_LT_DECL_EGREP])dnl
+
+AC_LANG_PUSH(C++)
+_LT_TAGVAR(archive_cmds_need_lc, $1)=no
+_LT_TAGVAR(allow_undefined_flag, $1)=
+_LT_TAGVAR(always_export_symbols, $1)=no
+_LT_TAGVAR(archive_expsym_cmds, $1)=
+_LT_TAGVAR(compiler_needs_object, $1)=no
+_LT_TAGVAR(export_dynamic_flag_spec, $1)=
+_LT_TAGVAR(hardcode_direct, $1)=no
+_LT_TAGVAR(hardcode_direct_absolute, $1)=no
+_LT_TAGVAR(hardcode_libdir_flag_spec, $1)=
+_LT_TAGVAR(hardcode_libdir_flag_spec_ld, $1)=
+_LT_TAGVAR(hardcode_libdir_separator, $1)=
+_LT_TAGVAR(hardcode_minus_L, $1)=no
+_LT_TAGVAR(hardcode_shlibpath_var, $1)=unsupported
+_LT_TAGVAR(hardcode_automatic, $1)=no
+_LT_TAGVAR(inherit_rpath, $1)=no
+_LT_TAGVAR(module_cmds, $1)=
+_LT_TAGVAR(module_expsym_cmds, $1)=
+_LT_TAGVAR(link_all_deplibs, $1)=unknown
+_LT_TAGVAR(old_archive_cmds, $1)=$old_archive_cmds
+_LT_TAGVAR(no_undefined_flag, $1)=
+_LT_TAGVAR(whole_archive_flag_spec, $1)=
+_LT_TAGVAR(enable_shared_with_static_runtimes, $1)=no
+
+# Source file extension for C++ test sources.
+ac_ext=cpp
+
+# Object file extension for compiled C++ test sources.
+objext=o
+_LT_TAGVAR(objext, $1)=$objext
+
+# No sense in running all these tests if we already determined that
+# the CXX compiler isn't working. Some variables (like enable_shared)
+# are currently assumed to apply to all compilers on this platform,
+# and will be corrupted by setting them based on a non-working compiler.
+if test "$_lt_caught_CXX_error" != yes; then
+ # Code to be used in simple compile tests
+ lt_simple_compile_test_code="int some_variable = 0;"
+
+ # Code to be used in simple link tests
+ lt_simple_link_test_code='int main(int, char *[[]]) { return(0); }'
+
+ # ltmain only uses $CC for tagged configurations so make sure $CC is set.
+ _LT_TAG_COMPILER
+
+ # save warnings/boilerplate of simple test code
+ _LT_COMPILER_BOILERPLATE
+ _LT_LINKER_BOILERPLATE
+
+ # Allow CC to be a program name with arguments.
+ lt_save_CC=$CC
+ lt_save_LD=$LD
+ lt_save_GCC=$GCC
+ GCC=$GXX
+ lt_save_with_gnu_ld=$with_gnu_ld
+ lt_save_path_LD=$lt_cv_path_LD
+ if test -n "${lt_cv_prog_gnu_ldcxx+set}"; then
+ lt_cv_prog_gnu_ld=$lt_cv_prog_gnu_ldcxx
+ else
+ $as_unset lt_cv_prog_gnu_ld
+ fi
+ if test -n "${lt_cv_path_LDCXX+set}"; then
+ lt_cv_path_LD=$lt_cv_path_LDCXX
+ else
+ $as_unset lt_cv_path_LD
+ fi
+ test -z "${LDCXX+set}" || LD=$LDCXX
+ CC=${CXX-"c++"}
+ compiler=$CC
+ _LT_TAGVAR(compiler, $1)=$CC
+ _LT_CC_BASENAME([$compiler])
+
+ if test -n "$compiler"; then
+ # We don't want -fno-exception when compiling C++ code, so set the
+ # no_builtin_flag separately
+ if test "$GXX" = yes; then
+ _LT_TAGVAR(lt_prog_compiler_no_builtin_flag, $1)=' -fno-builtin'
+ else
+ _LT_TAGVAR(lt_prog_compiler_no_builtin_flag, $1)=
+ fi
+
+ if test "$GXX" = yes; then
+ # Set up default GNU C++ configuration
+
+ LT_PATH_LD
+
+ # Check if GNU C++ uses GNU ld as the underlying linker, since the
+ # archiving commands below assume that GNU ld is being used.
+ if test "$with_gnu_ld" = yes; then
+ _LT_TAGVAR(archive_cmds, $1)='$CC -shared -nostdlib $predep_objects $libobjs $deplibs $postdep_objects $compiler_flags ${wl}-soname $wl$soname -o $lib'
+ _LT_TAGVAR(archive_expsym_cmds, $1)='$CC -shared -nostdlib $predep_objects $libobjs $deplibs $postdep_objects $compiler_flags ${wl}-soname $wl$soname ${wl}-retain-symbols-file $wl$export_symbols -o $lib'
+
+ _LT_TAGVAR(hardcode_libdir_flag_spec, $1)='${wl}-rpath ${wl}$libdir'
+ _LT_TAGVAR(export_dynamic_flag_spec, $1)='${wl}--export-dynamic'
+
+ # If archive_cmds runs LD, not CC, wlarc should be empty
+ # XXX I think wlarc can be eliminated in ltcf-cxx, but I need to
+ # investigate it a little bit more. (MM)
+ wlarc='${wl}'
+
+ # ancient GNU ld didn't support --whole-archive et. al.
+ if eval "`$CC -print-prog-name=ld` --help 2>&1" |
+ $GREP 'no-whole-archive' > /dev/null; then
+ _LT_TAGVAR(whole_archive_flag_spec, $1)="$wlarc"'--whole-archive$convenience '"$wlarc"'--no-whole-archive'
+ else
+ _LT_TAGVAR(whole_archive_flag_spec, $1)=
+ fi
+ else
+ with_gnu_ld=no
+ wlarc=
+
+ # A generic and very simple default shared library creation
+ # command for GNU C++ for the case where it uses the native
+ # linker, instead of GNU ld. If possible, this setting should
+ # overridden to take advantage of the native linker features on
+ # the platform it is being used on.
+ _LT_TAGVAR(archive_cmds, $1)='$CC -shared -nostdlib $predep_objects $libobjs $deplibs $postdep_objects $compiler_flags -o $lib'
+ fi
+
+ # Commands to make compiler produce verbose output that lists
+ # what "hidden" libraries, object files and flags are used when
+ # linking a shared library.
+ output_verbose_link_cmd='$CC -shared $CFLAGS -v conftest.$objext 2>&1 | $GREP "\-L"'
+
+ else
+ GXX=no
+ with_gnu_ld=no
+ wlarc=
+ fi
+
+ # PORTME: fill in a description of your system's C++ link characteristics
+ AC_MSG_CHECKING([whether the $compiler linker ($LD) supports shared libraries])
+ _LT_TAGVAR(ld_shlibs, $1)=yes
+ case $host_os in
+ aix3*)
+ # FIXME: insert proper C++ library support
+ _LT_TAGVAR(ld_shlibs, $1)=no
+ ;;
+ aix[[4-9]]*)
+ if test "$host_cpu" = ia64; then
+ # On IA64, the linker does run time linking by default, so we don't
+ # have to do anything special.
+ aix_use_runtimelinking=no
+ exp_sym_flag='-Bexport'
+ no_entry_flag=""
+ else
+ aix_use_runtimelinking=no
+
+ # Test if we are trying to use run time linking or normal
+ # AIX style linking. If -brtl is somewhere in LDFLAGS, we
+ # need to do runtime linking.
+ case $host_os in aix4.[[23]]|aix4.[[23]].*|aix[[5-9]]*)
+ for ld_flag in $LDFLAGS; do
+ case $ld_flag in
+ *-brtl*)
+ aix_use_runtimelinking=yes
+ break
+ ;;
+ esac
+ done
+ ;;
+ esac
+
+ exp_sym_flag='-bexport'
+ no_entry_flag='-bnoentry'
+ fi
+
+ # When large executables or shared objects are built, AIX ld can
+ # have problems creating the table of contents. If linking a library
+ # or program results in "error TOC overflow" add -mminimal-toc to
+ # CXXFLAGS/CFLAGS for g++/gcc. In the cases where that is not
+ # enough to fix the problem, add -Wl,-bbigtoc to LDFLAGS.
+
+ _LT_TAGVAR(archive_cmds, $1)=''
+ _LT_TAGVAR(hardcode_direct, $1)=yes
+ _LT_TAGVAR(hardcode_direct_absolute, $1)=yes
+ _LT_TAGVAR(hardcode_libdir_separator, $1)=':'
+ _LT_TAGVAR(link_all_deplibs, $1)=yes
+ _LT_TAGVAR(file_list_spec, $1)='${wl}-f,'
+
+ if test "$GXX" = yes; then
+ case $host_os in aix4.[[012]]|aix4.[[012]].*)
+ # We only want to do this on AIX 4.2 and lower, the check
+ # below for broken collect2 doesn't work under 4.3+
+ collect2name=`${CC} -print-prog-name=collect2`
+ if test -f "$collect2name" &&
+ strings "$collect2name" | $GREP resolve_lib_name >/dev/null
+ then
+ # We have reworked collect2
+ :
+ else
+ # We have old collect2
+ _LT_TAGVAR(hardcode_direct, $1)=unsupported
+ # It fails to find uninstalled libraries when the uninstalled
+ # path is not listed in the libpath. Setting hardcode_minus_L
+ # to unsupported forces relinking
+ _LT_TAGVAR(hardcode_minus_L, $1)=yes
+ _LT_TAGVAR(hardcode_libdir_flag_spec, $1)='-L$libdir'
+ _LT_TAGVAR(hardcode_libdir_separator, $1)=
+ fi
+ esac
+ shared_flag='-shared'
+ if test "$aix_use_runtimelinking" = yes; then
+ shared_flag="$shared_flag "'${wl}-G'
+ fi
+ else
+ # not using gcc
+ if test "$host_cpu" = ia64; then
+ # VisualAge C++, Version 5.5 for AIX 5L for IA-64, Beta 3 Release
+ # chokes on -Wl,-G. The following line is correct:
+ shared_flag='-G'
+ else
+ if test "$aix_use_runtimelinking" = yes; then
+ shared_flag='${wl}-G'
+ else
+ shared_flag='${wl}-bM:SRE'
+ fi
+ fi
+ fi
+
+ _LT_TAGVAR(export_dynamic_flag_spec, $1)='${wl}-bexpall'
+ # It seems that -bexpall does not export symbols beginning with
+ # underscore (_), so it is better to generate a list of symbols to
+ # export.
+ _LT_TAGVAR(always_export_symbols, $1)=yes
+ if test "$aix_use_runtimelinking" = yes; then
+ # Warning - without using the other runtime loading flags (-brtl),
+ # -berok will link without error, but may produce a broken library.
+ _LT_TAGVAR(allow_undefined_flag, $1)='-berok'
+ # Determine the default libpath from the value encoded in an empty
+ # executable.
+ _LT_SYS_MODULE_PATH_AIX
+ _LT_TAGVAR(hardcode_libdir_flag_spec, $1)='${wl}-blibpath:$libdir:'"$aix_libpath"
+
+ _LT_TAGVAR(archive_expsym_cmds, $1)='$CC -o $output_objdir/$soname $libobjs $deplibs '"\${wl}$no_entry_flag"' $compiler_flags `if test "x${allow_undefined_flag}" != "x"; then $ECHO "X${wl}${allow_undefined_flag}" | $Xsed; else :; fi` '"\${wl}$exp_sym_flag:\$export_symbols $shared_flag"
+ else
+ if test "$host_cpu" = ia64; then
+ _LT_TAGVAR(hardcode_libdir_flag_spec, $1)='${wl}-R $libdir:/usr/lib:/lib'
+ _LT_TAGVAR(allow_undefined_flag, $1)="-z nodefs"
+ _LT_TAGVAR(archive_expsym_cmds, $1)="\$CC $shared_flag"' -o $output_objdir/$soname $libobjs $deplibs '"\${wl}$no_entry_flag"' $compiler_flags ${wl}${allow_undefined_flag} '"\${wl}$exp_sym_flag:\$export_symbols"
+ else
+ # Determine the default libpath from the value encoded in an
+ # empty executable.
+ _LT_SYS_MODULE_PATH_AIX
+ _LT_TAGVAR(hardcode_libdir_flag_spec, $1)='${wl}-blibpath:$libdir:'"$aix_libpath"
+ # Warning - without using the other run time loading flags,
+ # -berok will link without error, but may produce a broken library.
+ _LT_TAGVAR(no_undefined_flag, $1)=' ${wl}-bernotok'
+ _LT_TAGVAR(allow_undefined_flag, $1)=' ${wl}-berok'
+ # Exported symbols can be pulled into shared objects from archives
+ _LT_TAGVAR(whole_archive_flag_spec, $1)='$convenience'
+ _LT_TAGVAR(archive_cmds_need_lc, $1)=yes
+ # This is similar to how AIX traditionally builds its shared
+ # libraries.
+ _LT_TAGVAR(archive_expsym_cmds, $1)="\$CC $shared_flag"' -o $output_objdir/$soname $libobjs $deplibs ${wl}-bnoentry $compiler_flags ${wl}-bE:$export_symbols${allow_undefined_flag}~$AR $AR_FLAGS $output_objdir/$libname$release.a $output_objdir/$soname'
+ fi
+ fi
+ ;;
+
+ beos*)
+ if $LD --help 2>&1 | $GREP ': supported targets:.* elf' > /dev/null; then
+ _LT_TAGVAR(allow_undefined_flag, $1)=unsupported
+ # Joseph Beckenbach <jrb3@best.com> says some releases of gcc
+ # support --undefined. This deserves some investigation. FIXME
+ _LT_TAGVAR(archive_cmds, $1)='$CC -nostart $libobjs $deplibs $compiler_flags ${wl}-soname $wl$soname -o $lib'
+ else
+ _LT_TAGVAR(ld_shlibs, $1)=no
+ fi
+ ;;
+
+ chorus*)
+ case $cc_basename in
+ *)
+ # FIXME: insert proper C++ library support
+ _LT_TAGVAR(ld_shlibs, $1)=no
+ ;;
+ esac
+ ;;
+
+ cygwin* | mingw* | pw32* | cegcc*)
+ # _LT_TAGVAR(hardcode_libdir_flag_spec, $1) is actually meaningless,
+ # as there is no search path for DLLs.
+ _LT_TAGVAR(hardcode_libdir_flag_spec, $1)='-L$libdir'
+ _LT_TAGVAR(allow_undefined_flag, $1)=unsupported
+ _LT_TAGVAR(always_export_symbols, $1)=no
+ _LT_TAGVAR(enable_shared_with_static_runtimes, $1)=yes
+
+ if $LD --help 2>&1 | $GREP 'auto-import' > /dev/null; then
+ _LT_TAGVAR(archive_cmds, $1)='$CC -shared -nostdlib $predep_objects $libobjs $deplibs $postdep_objects $compiler_flags -o $output_objdir/$soname ${wl}--enable-auto-image-base -Xlinker --out-implib -Xlinker $lib'
+ # If the export-symbols file already is a .def file (1st line
+ # is EXPORTS), use it as is; otherwise, prepend...
+ _LT_TAGVAR(archive_expsym_cmds, $1)='if test "x`$SED 1q $export_symbols`" = xEXPORTS; then
+ cp $export_symbols $output_objdir/$soname.def;
+ else
+ echo EXPORTS > $output_objdir/$soname.def;
+ cat $export_symbols >> $output_objdir/$soname.def;
+ fi~
+ $CC -shared -nostdlib $output_objdir/$soname.def $predep_objects $libobjs $deplibs $postdep_objects $compiler_flags -o $output_objdir/$soname ${wl}--enable-auto-image-base -Xlinker --out-implib -Xlinker $lib'
+ else
+ _LT_TAGVAR(ld_shlibs, $1)=no
+ fi
+ ;;
+ darwin* | rhapsody*)
+ _LT_DARWIN_LINKER_FEATURES($1)
+ ;;
+
+ dgux*)
+ case $cc_basename in
+ ec++*)
+ # FIXME: insert proper C++ library support
+ _LT_TAGVAR(ld_shlibs, $1)=no
+ ;;
+ ghcx*)
+ # Green Hills C++ Compiler
+ # FIXME: insert proper C++ library support
+ _LT_TAGVAR(ld_shlibs, $1)=no
+ ;;
+ *)
+ # FIXME: insert proper C++ library support
+ _LT_TAGVAR(ld_shlibs, $1)=no
+ ;;
+ esac
+ ;;
+
+ freebsd[[12]]*)
+ # C++ shared libraries reported to be fairly broken before
+ # switch to ELF
+ _LT_TAGVAR(ld_shlibs, $1)=no
+ ;;
+
+ freebsd-elf*)
+ _LT_TAGVAR(archive_cmds_need_lc, $1)=no
+ ;;
+
+ freebsd* | dragonfly*)
+ # FreeBSD 3 and later use GNU C++ and GNU ld with standard ELF
+ # conventions
+ _LT_TAGVAR(ld_shlibs, $1)=yes
+ ;;
+
+ gnu*)
+ ;;
+
+ hpux9*)
+ _LT_TAGVAR(hardcode_libdir_flag_spec, $1)='${wl}+b ${wl}$libdir'
+ _LT_TAGVAR(hardcode_libdir_separator, $1)=:
+ _LT_TAGVAR(export_dynamic_flag_spec, $1)='${wl}-E'
+ _LT_TAGVAR(hardcode_direct, $1)=yes
+ _LT_TAGVAR(hardcode_minus_L, $1)=yes # Not in the search PATH,
+ # but as the default
+ # location of the library.
+
+ case $cc_basename in
+ CC*)
+ # FIXME: insert proper C++ library support
+ _LT_TAGVAR(ld_shlibs, $1)=no
+ ;;
+ aCC*)
+ _LT_TAGVAR(archive_cmds, $1)='$RM $output_objdir/$soname~$CC -b ${wl}+b ${wl}$install_libdir -o $output_objdir/$soname $predep_objects $libobjs $deplibs $postdep_objects $compiler_flags~test $output_objdir/$soname = $lib || mv $output_objdir/$soname $lib'
+ # Commands to make compiler produce verbose output that lists
+ # what "hidden" libraries, object files and flags are used when
+ # linking a shared library.
+ #
+ # There doesn't appear to be a way to prevent this compiler from
+ # explicitly linking system object files so we need to strip them
+ # from the output so that they don't get included in the library
+ # dependencies.
+ output_verbose_link_cmd='templist=`($CC -b $CFLAGS -v conftest.$objext 2>&1) | $EGREP "\-L"`; list=""; for z in $templist; do case $z in conftest.$objext) list="$list $z";; *.$objext);; *) list="$list $z";;esac; done; $ECHO "X$list" | $Xsed'
+ ;;
+ *)
+ if test "$GXX" = yes; then
+ _LT_TAGVAR(archive_cmds, $1)='$RM $output_objdir/$soname~$CC -shared -nostdlib -fPIC ${wl}+b ${wl}$install_libdir -o $output_objdir/$soname $predep_objects $libobjs $deplibs $postdep_objects $compiler_flags~test $output_objdir/$soname = $lib || mv $output_objdir/$soname $lib'
+ else
+ # FIXME: insert proper C++ library support
+ _LT_TAGVAR(ld_shlibs, $1)=no
+ fi
+ ;;
+ esac
+ ;;
+
+ hpux10*|hpux11*)
+ if test $with_gnu_ld = no; then
+ _LT_TAGVAR(hardcode_libdir_flag_spec, $1)='${wl}+b ${wl}$libdir'
+ _LT_TAGVAR(hardcode_libdir_separator, $1)=:
+
+ case $host_cpu in
+ hppa*64*|ia64*)
+ ;;
+ *)
+ _LT_TAGVAR(export_dynamic_flag_spec, $1)='${wl}-E'
+ ;;
+ esac
+ fi
+ case $host_cpu in
+ hppa*64*|ia64*)
+ _LT_TAGVAR(hardcode_direct, $1)=no
+ _LT_TAGVAR(hardcode_shlibpath_var, $1)=no
+ ;;
+ *)
+ _LT_TAGVAR(hardcode_direct, $1)=yes
+ _LT_TAGVAR(hardcode_direct_absolute, $1)=yes
+ _LT_TAGVAR(hardcode_minus_L, $1)=yes # Not in the search PATH,
+ # but as the default
+ # location of the library.
+ ;;
+ esac
+
+ case $cc_basename in
+ CC*)
+ # FIXME: insert proper C++ library support
+ _LT_TAGVAR(ld_shlibs, $1)=no
+ ;;
+ aCC*)
+ case $host_cpu in
+ hppa*64*)
+ _LT_TAGVAR(archive_cmds, $1)='$CC -b ${wl}+h ${wl}$soname -o $lib $predep_objects $libobjs $deplibs $postdep_objects $compiler_flags'
+ ;;
+ ia64*)
+ _LT_TAGVAR(archive_cmds, $1)='$CC -b ${wl}+h ${wl}$soname ${wl}+nodefaultrpath -o $lib $predep_objects $libobjs $deplibs $postdep_objects $compiler_flags'
+ ;;
+ *)
+ _LT_TAGVAR(archive_cmds, $1)='$CC -b ${wl}+h ${wl}$soname ${wl}+b ${wl}$install_libdir -o $lib $predep_objects $libobjs $deplibs $postdep_objects $compiler_flags'
+ ;;
+ esac
+ # Commands to make compiler produce verbose output that lists
+ # what "hidden" libraries, object files and flags are used when
+ # linking a shared library.
+ #
+ # There doesn't appear to be a way to prevent this compiler from
+ # explicitly linking system object files so we need to strip them
+ # from the output so that they don't get included in the library
+ # dependencies.
+ output_verbose_link_cmd='templist=`($CC -b $CFLAGS -v conftest.$objext 2>&1) | $GREP "\-L"`; list=""; for z in $templist; do case $z in conftest.$objext) list="$list $z";; *.$objext);; *) list="$list $z";;esac; done; $ECHO "X$list" | $Xsed'
+ ;;
+ *)
+ if test "$GXX" = yes; then
+ if test $with_gnu_ld = no; then
+ case $host_cpu in
+ hppa*64*)
+ _LT_TAGVAR(archive_cmds, $1)='$CC -shared -nostdlib -fPIC ${wl}+h ${wl}$soname -o $lib $predep_objects $libobjs $deplibs $postdep_objects $compiler_flags'
+ ;;
+ ia64*)
+ _LT_TAGVAR(archive_cmds, $1)='$CC -shared -nostdlib -fPIC ${wl}+h ${wl}$soname ${wl}+nodefaultrpath -o $lib $predep_objects $libobjs $deplibs $postdep_objects $compiler_flags'
+ ;;
+ *)
+ _LT_TAGVAR(archive_cmds, $1)='$CC -shared -nostdlib -fPIC ${wl}+h ${wl}$soname ${wl}+b ${wl}$install_libdir -o $lib $predep_objects $libobjs $deplibs $postdep_objects $compiler_flags'
+ ;;
+ esac
+ fi
+ else
+ # FIXME: insert proper C++ library support
+ _LT_TAGVAR(ld_shlibs, $1)=no
+ fi
+ ;;
+ esac
+ ;;
+
+ interix[[3-9]]*)
+ _LT_TAGVAR(hardcode_direct, $1)=no
+ _LT_TAGVAR(hardcode_shlibpath_var, $1)=no
+ _LT_TAGVAR(hardcode_libdir_flag_spec, $1)='${wl}-rpath,$libdir'
+ _LT_TAGVAR(export_dynamic_flag_spec, $1)='${wl}-E'
+ # Hack: On Interix 3.x, we cannot compile PIC because of a broken gcc.
+ # Instead, shared libraries are loaded at an image base (0x10000000 by
+ # default) and relocated if they conflict, which is a slow very memory
+ # consuming and fragmenting process. To avoid this, we pick a random,
+ # 256 KiB-aligned image base between 0x50000000 and 0x6FFC0000 at link
+ # time. Moving up from 0x10000000 also allows more sbrk(2) space.
+ _LT_TAGVAR(archive_cmds, $1)='$CC -shared $pic_flag $libobjs $deplibs $compiler_flags ${wl}-h,$soname ${wl}--image-base,`expr ${RANDOM-$$} % 4096 / 2 \* 262144 + 1342177280` -o $lib'
+ _LT_TAGVAR(archive_expsym_cmds, $1)='sed "s,^,_," $export_symbols >$output_objdir/$soname.expsym~$CC -shared $pic_flag $libobjs $deplibs $compiler_flags ${wl}-h,$soname ${wl}--retain-symbols-file,$output_objdir/$soname.expsym ${wl}--image-base,`expr ${RANDOM-$$} % 4096 / 2 \* 262144 + 1342177280` -o $lib'
+ ;;
+ irix5* | irix6*)
+ case $cc_basename in
+ CC*)
+ # SGI C++
+ _LT_TAGVAR(archive_cmds, $1)='$CC -shared -all -multigot $predep_objects $libobjs $deplibs $postdep_objects $compiler_flags -soname $soname `test -n "$verstring" && $ECHO "X-set_version $verstring" | $Xsed` -update_registry ${output_objdir}/so_locations -o $lib'
+
+ # Archives containing C++ object files must be created using
+ # "CC -ar", where "CC" is the IRIX C++ compiler. This is
+ # necessary to make sure instantiated templates are included
+ # in the archive.
+ _LT_TAGVAR(old_archive_cmds, $1)='$CC -ar -WR,-u -o $oldlib $oldobjs'
+ ;;
+ *)
+ if test "$GXX" = yes; then
+ if test "$with_gnu_ld" = no; then
+ _LT_TAGVAR(archive_cmds, $1)='$CC -shared -nostdlib $predep_objects $libobjs $deplibs $postdep_objects $compiler_flags ${wl}-soname ${wl}$soname `test -n "$verstring" && $ECHO "X${wl}-set_version ${wl}$verstring" | $Xsed` ${wl}-update_registry ${wl}${output_objdir}/so_locations -o $lib'
+ else
+ _LT_TAGVAR(archive_cmds, $1)='$CC -shared -nostdlib $predep_objects $libobjs $deplibs $postdep_objects $compiler_flags ${wl}-soname ${wl}$soname `test -n "$verstring" && $ECHO "X${wl}-set_version ${wl}$verstring" | $Xsed` -o $lib'
+ fi
+ fi
+ _LT_TAGVAR(link_all_deplibs, $1)=yes
+ ;;
+ esac
+ _LT_TAGVAR(hardcode_libdir_flag_spec, $1)='${wl}-rpath ${wl}$libdir'
+ _LT_TAGVAR(hardcode_libdir_separator, $1)=:
+ _LT_TAGVAR(inherit_rpath, $1)=yes
+ ;;
+
+ linux* | k*bsd*-gnu)
+ case $cc_basename in
+ KCC*)
+ # Kuck and Associates, Inc. (KAI) C++ Compiler
+
+ # KCC will only create a shared library if the output file
+ # ends with ".so" (or ".sl" for HP-UX), so rename the library
+ # to its proper name (with version) after linking.
+ _LT_TAGVAR(archive_cmds, $1)='tempext=`echo $shared_ext | $SED -e '\''s/\([[^()0-9A-Za-z{}]]\)/\\\\\1/g'\''`; templib=`echo $lib | $SED -e "s/\${tempext}\..*/.so/"`; $CC $predep_objects $libobjs $deplibs $postdep_objects $compiler_flags --soname $soname -o \$templib; mv \$templib $lib'
+ _LT_TAGVAR(archive_expsym_cmds, $1)='tempext=`echo $shared_ext | $SED -e '\''s/\([[^()0-9A-Za-z{}]]\)/\\\\\1/g'\''`; templib=`echo $lib | $SED -e "s/\${tempext}\..*/.so/"`; $CC $predep_objects $libobjs $deplibs $postdep_objects $compiler_flags --soname $soname -o \$templib ${wl}-retain-symbols-file,$export_symbols; mv \$templib $lib'
+ # Commands to make compiler produce verbose output that lists
+ # what "hidden" libraries, object files and flags are used when
+ # linking a shared library.
+ #
+ # There doesn't appear to be a way to prevent this compiler from
+ # explicitly linking system object files so we need to strip them
+ # from the output so that they don't get included in the library
+ # dependencies.
+ output_verbose_link_cmd='templist=`$CC $CFLAGS -v conftest.$objext -o libconftest$shared_ext 2>&1 | $GREP "ld"`; rm -f libconftest$shared_ext; list=""; for z in $templist; do case $z in conftest.$objext) list="$list $z";; *.$objext);; *) list="$list $z";;esac; done; $ECHO "X$list" | $Xsed'
+
+ _LT_TAGVAR(hardcode_libdir_flag_spec, $1)='${wl}-rpath,$libdir'
+ _LT_TAGVAR(export_dynamic_flag_spec, $1)='${wl}--export-dynamic'
+
+ # Archives containing C++ object files must be created using
+ # "CC -Bstatic", where "CC" is the KAI C++ compiler.
+ _LT_TAGVAR(old_archive_cmds, $1)='$CC -Bstatic -o $oldlib $oldobjs'
+ ;;
+ icpc* | ecpc* )
+ # Intel C++
+ with_gnu_ld=yes
+ # version 8.0 and above of icpc choke on multiply defined symbols
+ # if we add $predep_objects and $postdep_objects, however 7.1 and
+ # earlier do not add the objects themselves.
+ case `$CC -V 2>&1` in
+ *"Version 7."*)
+ _LT_TAGVAR(archive_cmds, $1)='$CC -shared $predep_objects $libobjs $deplibs $postdep_objects $compiler_flags ${wl}-soname $wl$soname -o $lib'
+ _LT_TAGVAR(archive_expsym_cmds, $1)='$CC -shared $predep_objects $libobjs $deplibs $postdep_objects $compiler_flags ${wl}-soname $wl$soname ${wl}-retain-symbols-file $wl$export_symbols -o $lib'
+ ;;
+ *) # Version 8.0 or newer
+ tmp_idyn=
+ case $host_cpu in
+ ia64*) tmp_idyn=' -i_dynamic';;
+ esac
+ _LT_TAGVAR(archive_cmds, $1)='$CC -shared'"$tmp_idyn"' $libobjs $deplibs $compiler_flags ${wl}-soname $wl$soname -o $lib'
+ _LT_TAGVAR(archive_expsym_cmds, $1)='$CC -shared'"$tmp_idyn"' $libobjs $deplibs $compiler_flags ${wl}-soname $wl$soname ${wl}-retain-symbols-file $wl$export_symbols -o $lib'
+ ;;
+ esac
+ _LT_TAGVAR(archive_cmds_need_lc, $1)=no
+ _LT_TAGVAR(hardcode_libdir_flag_spec, $1)='${wl}-rpath,$libdir'
+ _LT_TAGVAR(export_dynamic_flag_spec, $1)='${wl}--export-dynamic'
+ _LT_TAGVAR(whole_archive_flag_spec, $1)='${wl}--whole-archive$convenience ${wl}--no-whole-archive'
+ ;;
+ pgCC* | pgcpp*)
+ # Portland Group C++ compiler
+ case `$CC -V` in
+ *pgCC\ [[1-5]]* | *pgcpp\ [[1-5]]*)
+ _LT_TAGVAR(prelink_cmds, $1)='tpldir=Template.dir~
+ rm -rf $tpldir~
+ $CC --prelink_objects --instantiation_dir $tpldir $objs $libobjs $compile_deplibs~
+ compile_command="$compile_command `find $tpldir -name \*.o | $NL2SP`"'
+ _LT_TAGVAR(old_archive_cmds, $1)='tpldir=Template.dir~
+ rm -rf $tpldir~
+ $CC --prelink_objects --instantiation_dir $tpldir $oldobjs$old_deplibs~
+ $AR $AR_FLAGS $oldlib$oldobjs$old_deplibs `find $tpldir -name \*.o | $NL2SP`~
+ $RANLIB $oldlib'
+ _LT_TAGVAR(archive_cmds, $1)='tpldir=Template.dir~
+ rm -rf $tpldir~
+ $CC --prelink_objects --instantiation_dir $tpldir $predep_objects $libobjs $deplibs $convenience $postdep_objects~
+ $CC -shared $pic_flag $predep_objects $libobjs $deplibs `find $tpldir -name \*.o | $NL2SP` $postdep_objects $compiler_flags ${wl}-soname ${wl}$soname -o $lib'
+ _LT_TAGVAR(archive_expsym_cmds, $1)='tpldir=Template.dir~
+ rm -rf $tpldir~
+ $CC --prelink_objects --instantiation_dir $tpldir $predep_objects $libobjs $deplibs $convenience $postdep_objects~
+ $CC -shared $pic_flag $predep_objects $libobjs $deplibs `find $tpldir -name \*.o | $NL2SP` $postdep_objects $compiler_flags ${wl}-soname ${wl}$soname ${wl}-retain-symbols-file ${wl}$export_symbols -o $lib'
+ ;;
+ *) # Version 6 will use weak symbols
+ _LT_TAGVAR(archive_cmds, $1)='$CC -shared $pic_flag $predep_objects $libobjs $deplibs $postdep_objects $compiler_flags ${wl}-soname ${wl}$soname -o $lib'
+ _LT_TAGVAR(archive_expsym_cmds, $1)='$CC -shared $pic_flag $predep_objects $libobjs $deplibs $postdep_objects $compiler_flags ${wl}-soname ${wl}$soname ${wl}-retain-symbols-file ${wl}$export_symbols -o $lib'
+ ;;
+ esac
+
+ _LT_TAGVAR(hardcode_libdir_flag_spec, $1)='${wl}--rpath ${wl}$libdir'
+ _LT_TAGVAR(export_dynamic_flag_spec, $1)='${wl}--export-dynamic'
+ _LT_TAGVAR(whole_archive_flag_spec, $1)='${wl}--whole-archive`for conv in $convenience\"\"; do test -n \"$conv\" && new_convenience=\"$new_convenience,$conv\"; done; $ECHO \"$new_convenience\"` ${wl}--no-whole-archive'
+ ;;
+ cxx*)
+ # Compaq C++
+ _LT_TAGVAR(archive_cmds, $1)='$CC -shared $predep_objects $libobjs $deplibs $postdep_objects $compiler_flags ${wl}-soname $wl$soname -o $lib'
+ _LT_TAGVAR(archive_expsym_cmds, $1)='$CC -shared $predep_objects $libobjs $deplibs $postdep_objects $compiler_flags ${wl}-soname $wl$soname -o $lib ${wl}-retain-symbols-file $wl$export_symbols'
+
+ runpath_var=LD_RUN_PATH
+ _LT_TAGVAR(hardcode_libdir_flag_spec, $1)='-rpath $libdir'
+ _LT_TAGVAR(hardcode_libdir_separator, $1)=:
+
+ # Commands to make compiler produce verbose output that lists
+ # what "hidden" libraries, object files and flags are used when
+ # linking a shared library.
+ #
+ # There doesn't appear to be a way to prevent this compiler from
+ # explicitly linking system object files so we need to strip them
+ # from the output so that they don't get included in the library
+ # dependencies.
+ output_verbose_link_cmd='templist=`$CC -shared $CFLAGS -v conftest.$objext 2>&1 | $GREP "ld"`; templist=`$ECHO "X$templist" | $Xsed -e "s/\(^.*ld.*\)\( .*ld .*$\)/\1/"`; list=""; for z in $templist; do case $z in conftest.$objext) list="$list $z";; *.$objext);; *) list="$list $z";;esac; done; $ECHO "X$list" | $Xsed'
+ ;;
+ xl*)
+ # IBM XL 8.0 on PPC, with GNU ld
+ _LT_TAGVAR(hardcode_libdir_flag_spec, $1)='${wl}-rpath ${wl}$libdir'
+ _LT_TAGVAR(export_dynamic_flag_spec, $1)='${wl}--export-dynamic'
+ _LT_TAGVAR(archive_cmds, $1)='$CC -qmkshrobj $libobjs $deplibs $compiler_flags ${wl}-soname $wl$soname -o $lib'
+ if test "x$supports_anon_versioning" = xyes; then
+ _LT_TAGVAR(archive_expsym_cmds, $1)='echo "{ global:" > $output_objdir/$libname.ver~
+ cat $export_symbols | sed -e "s/\(.*\)/\1;/" >> $output_objdir/$libname.ver~
+ echo "local: *; };" >> $output_objdir/$libname.ver~
+ $CC -qmkshrobj $libobjs $deplibs $compiler_flags ${wl}-soname $wl$soname ${wl}-version-script ${wl}$output_objdir/$libname.ver -o $lib'
+ fi
+ ;;
+ *)
+ case `$CC -V 2>&1 | sed 5q` in
+ *Sun\ C*)
+ # Sun C++ 5.9
+ _LT_TAGVAR(no_undefined_flag, $1)=' -zdefs'
+ _LT_TAGVAR(archive_cmds, $1)='$CC -G${allow_undefined_flag} -h$soname -o $lib $predep_objects $libobjs $deplibs $postdep_objects $compiler_flags'
+ _LT_TAGVAR(archive_expsym_cmds, $1)='$CC -G${allow_undefined_flag} -h$soname -o $lib $predep_objects $libobjs $deplibs $postdep_objects $compiler_flags ${wl}-retain-symbols-file ${wl}$export_symbols'
+ _LT_TAGVAR(hardcode_libdir_flag_spec, $1)='-R$libdir'
+ _LT_TAGVAR(whole_archive_flag_spec, $1)='${wl}--whole-archive`new_convenience=; for conv in $convenience\"\"; do test -z \"$conv\" || new_convenience=\"$new_convenience,$conv\"; done; $ECHO \"$new_convenience\"` ${wl}--no-whole-archive'
+ _LT_TAGVAR(compiler_needs_object, $1)=yes
+
+ # Not sure whether something based on
+ # $CC $CFLAGS -v conftest.$objext -o libconftest$shared_ext 2>&1
+ # would be better.
+ output_verbose_link_cmd='echo'
+
+ # Archives containing C++ object files must be created using
+ # "CC -xar", where "CC" is the Sun C++ compiler. This is
+ # necessary to make sure instantiated templates are included
+ # in the archive.
+ _LT_TAGVAR(old_archive_cmds, $1)='$CC -xar -o $oldlib $oldobjs'
+ ;;
+ esac
+ ;;
+ esac
+ ;;
+
+ lynxos*)
+ # FIXME: insert proper C++ library support
+ _LT_TAGVAR(ld_shlibs, $1)=no
+ ;;
+
+ m88k*)
+ # FIXME: insert proper C++ library support
+ _LT_TAGVAR(ld_shlibs, $1)=no
+ ;;
+
+ mvs*)
+ case $cc_basename in
+ cxx*)
+ # FIXME: insert proper C++ library support
+ _LT_TAGVAR(ld_shlibs, $1)=no
+ ;;
+ *)
+ # FIXME: insert proper C++ library support
+ _LT_TAGVAR(ld_shlibs, $1)=no
+ ;;
+ esac
+ ;;
+
+ netbsd*)
+ if echo __ELF__ | $CC -E - | $GREP __ELF__ >/dev/null; then
+ _LT_TAGVAR(archive_cmds, $1)='$LD -Bshareable -o $lib $predep_objects $libobjs $deplibs $postdep_objects $linker_flags'
+ wlarc=
+ _LT_TAGVAR(hardcode_libdir_flag_spec, $1)='-R$libdir'
+ _LT_TAGVAR(hardcode_direct, $1)=yes
+ _LT_TAGVAR(hardcode_shlibpath_var, $1)=no
+ fi
+ # Workaround some broken pre-1.5 toolchains
+ output_verbose_link_cmd='$CC -shared $CFLAGS -v conftest.$objext 2>&1 | $GREP conftest.$objext | $SED -e "s:-lgcc -lc -lgcc::"'
+ ;;
+
+ *nto* | *qnx*)
+ _LT_TAGVAR(ld_shlibs, $1)=yes
+ ;;
+
+ openbsd2*)
+ # C++ shared libraries are fairly broken
+ _LT_TAGVAR(ld_shlibs, $1)=no
+ ;;
+
+ openbsd*)
+ if test -f /usr/libexec/ld.so; then
+ _LT_TAGVAR(hardcode_direct, $1)=yes
+ _LT_TAGVAR(hardcode_shlibpath_var, $1)=no
+ _LT_TAGVAR(hardcode_direct_absolute, $1)=yes
+ _LT_TAGVAR(archive_cmds, $1)='$CC -shared $pic_flag $predep_objects $libobjs $deplibs $postdep_objects $compiler_flags -o $lib'
+ _LT_TAGVAR(hardcode_libdir_flag_spec, $1)='${wl}-rpath,$libdir'
+ if test -z "`echo __ELF__ | $CC -E - | grep __ELF__`" || test "$host_os-$host_cpu" = "openbsd2.8-powerpc"; then
+ _LT_TAGVAR(archive_expsym_cmds, $1)='$CC -shared $pic_flag $predep_objects $libobjs $deplibs $postdep_objects $compiler_flags ${wl}-retain-symbols-file,$export_symbols -o $lib'
+ _LT_TAGVAR(export_dynamic_flag_spec, $1)='${wl}-E'
+ _LT_TAGVAR(whole_archive_flag_spec, $1)="$wlarc"'--whole-archive$convenience '"$wlarc"'--no-whole-archive'
+ fi
+ output_verbose_link_cmd=echo
+ else
+ _LT_TAGVAR(ld_shlibs, $1)=no
+ fi
+ ;;
+
+ osf3* | osf4* | osf5*)
+ case $cc_basename in
+ KCC*)
+ # Kuck and Associates, Inc. (KAI) C++ Compiler
+
+ # KCC will only create a shared library if the output file
+ # ends with ".so" (or ".sl" for HP-UX), so rename the library
+ # to its proper name (with version) after linking.
+ _LT_TAGVAR(archive_cmds, $1)='tempext=`echo $shared_ext | $SED -e '\''s/\([[^()0-9A-Za-z{}]]\)/\\\\\1/g'\''`; templib=`echo "$lib" | $SED -e "s/\${tempext}\..*/.so/"`; $CC $predep_objects $libobjs $deplibs $postdep_objects $compiler_flags --soname $soname -o \$templib; mv \$templib $lib'
+
+ _LT_TAGVAR(hardcode_libdir_flag_spec, $1)='${wl}-rpath,$libdir'
+ _LT_TAGVAR(hardcode_libdir_separator, $1)=:
+
+ # Archives containing C++ object files must be created using
+ # the KAI C++ compiler.
+ case $host in
+ osf3*) _LT_TAGVAR(old_archive_cmds, $1)='$CC -Bstatic -o $oldlib $oldobjs' ;;
+ *) _LT_TAGVAR(old_archive_cmds, $1)='$CC -o $oldlib $oldobjs' ;;
+ esac
+ ;;
+ RCC*)
+ # Rational C++ 2.4.1
+ # FIXME: insert proper C++ library support
+ _LT_TAGVAR(ld_shlibs, $1)=no
+ ;;
+ cxx*)
+ case $host in
+ osf3*)
+ _LT_TAGVAR(allow_undefined_flag, $1)=' ${wl}-expect_unresolved ${wl}\*'
+ _LT_TAGVAR(archive_cmds, $1)='$CC -shared${allow_undefined_flag} $predep_objects $libobjs $deplibs $postdep_objects $compiler_flags ${wl}-soname $soname `test -n "$verstring" && $ECHO "X${wl}-set_version $verstring" | $Xsed` -update_registry ${output_objdir}/so_locations -o $lib'
+ _LT_TAGVAR(hardcode_libdir_flag_spec, $1)='${wl}-rpath ${wl}$libdir'
+ ;;
+ *)
+ _LT_TAGVAR(allow_undefined_flag, $1)=' -expect_unresolved \*'
+ _LT_TAGVAR(archive_cmds, $1)='$CC -shared${allow_undefined_flag} $predep_objects $libobjs $deplibs $postdep_objects $compiler_flags -msym -soname $soname `test -n "$verstring" && $ECHO "X-set_version $verstring" | $Xsed` -update_registry ${output_objdir}/so_locations -o $lib'
+ _LT_TAGVAR(archive_expsym_cmds, $1)='for i in `cat $export_symbols`; do printf "%s %s\\n" -exported_symbol "\$i" >> $lib.exp; done~
+ echo "-hidden">> $lib.exp~
+ $CC -shared$allow_undefined_flag $predep_objects $libobjs $deplibs $postdep_objects $compiler_flags -msym -soname $soname ${wl}-input ${wl}$lib.exp `test -n "$verstring" && $ECHO "X-set_version $verstring" | $Xsed` -update_registry ${output_objdir}/so_locations -o $lib~
+ $RM $lib.exp'
+ _LT_TAGVAR(hardcode_libdir_flag_spec, $1)='-rpath $libdir'
+ ;;
+ esac
+
+ _LT_TAGVAR(hardcode_libdir_separator, $1)=:
+
+ # Commands to make compiler produce verbose output that lists
+ # what "hidden" libraries, object files and flags are used when
+ # linking a shared library.
+ #
+ # There doesn't appear to be a way to prevent this compiler from
+ # explicitly linking system object files so we need to strip them
+ # from the output so that they don't get included in the library
+ # dependencies.
+ output_verbose_link_cmd='templist=`$CC -shared $CFLAGS -v conftest.$objext 2>&1 | $GREP "ld" | $GREP -v "ld:"`; templist=`$ECHO "X$templist" | $Xsed -e "s/\(^.*ld.*\)\( .*ld.*$\)/\1/"`; list=""; for z in $templist; do case $z in conftest.$objext) list="$list $z";; *.$objext);; *) list="$list $z";;esac; done; $ECHO "X$list" | $Xsed'
+ ;;
+ *)
+ if test "$GXX" = yes && test "$with_gnu_ld" = no; then
+ _LT_TAGVAR(allow_undefined_flag, $1)=' ${wl}-expect_unresolved ${wl}\*'
+ case $host in
+ osf3*)
+ _LT_TAGVAR(archive_cmds, $1)='$CC -shared -nostdlib ${allow_undefined_flag} $predep_objects $libobjs $deplibs $postdep_objects $compiler_flags ${wl}-soname ${wl}$soname `test -n "$verstring" && $ECHO "X${wl}-set_version ${wl}$verstring" | $Xsed` ${wl}-update_registry ${wl}${output_objdir}/so_locations -o $lib'
+ ;;
+ *)
+ _LT_TAGVAR(archive_cmds, $1)='$CC -shared -nostdlib ${allow_undefined_flag} $predep_objects $libobjs $deplibs $postdep_objects $compiler_flags ${wl}-msym ${wl}-soname ${wl}$soname `test -n "$verstring" && $ECHO "${wl}-set_version ${wl}$verstring" | $Xsed` ${wl}-update_registry ${wl}${output_objdir}/so_locations -o $lib'
+ ;;
+ esac
+
+ _LT_TAGVAR(hardcode_libdir_flag_spec, $1)='${wl}-rpath ${wl}$libdir'
+ _LT_TAGVAR(hardcode_libdir_separator, $1)=:
+
+ # Commands to make compiler produce verbose output that lists
+ # what "hidden" libraries, object files and flags are used when
+ # linking a shared library.
+ output_verbose_link_cmd='$CC -shared $CFLAGS -v conftest.$objext 2>&1 | $GREP "\-L"'
+
+ else
+ # FIXME: insert proper C++ library support
+ _LT_TAGVAR(ld_shlibs, $1)=no
+ fi
+ ;;
+ esac
+ ;;
+
+ psos*)
+ # FIXME: insert proper C++ library support
+ _LT_TAGVAR(ld_shlibs, $1)=no
+ ;;
+
+ sunos4*)
+ case $cc_basename in
+ CC*)
+ # Sun C++ 4.x
+ # FIXME: insert proper C++ library support
+ _LT_TAGVAR(ld_shlibs, $1)=no
+ ;;
+ lcc*)
+ # Lucid
+ # FIXME: insert proper C++ library support
+ _LT_TAGVAR(ld_shlibs, $1)=no
+ ;;
+ *)
+ # FIXME: insert proper C++ library support
+ _LT_TAGVAR(ld_shlibs, $1)=no
+ ;;
+ esac
+ ;;
+
+ solaris*)
+ case $cc_basename in
+ CC*)
+ # Sun C++ 4.2, 5.x and Centerline C++
+ _LT_TAGVAR(archive_cmds_need_lc,$1)=yes
+ _LT_TAGVAR(no_undefined_flag, $1)=' -zdefs'
+ _LT_TAGVAR(archive_cmds, $1)='$CC -G${allow_undefined_flag} -h$soname -o $lib $predep_objects $libobjs $deplibs $postdep_objects $compiler_flags'
+ _LT_TAGVAR(archive_expsym_cmds, $1)='echo "{ global:" > $lib.exp~cat $export_symbols | $SED -e "s/\(.*\)/\1;/" >> $lib.exp~echo "local: *; };" >> $lib.exp~
+ $CC -G${allow_undefined_flag} ${wl}-M ${wl}$lib.exp -h$soname -o $lib $predep_objects $libobjs $deplibs $postdep_objects $compiler_flags~$RM $lib.exp'
+
+ _LT_TAGVAR(hardcode_libdir_flag_spec, $1)='-R$libdir'
+ _LT_TAGVAR(hardcode_shlibpath_var, $1)=no
+ case $host_os in
+ solaris2.[[0-5]] | solaris2.[[0-5]].*) ;;
+ *)
+ # The compiler driver will combine and reorder linker options,
+ # but understands `-z linker_flag'.
+ # Supported since Solaris 2.6 (maybe 2.5.1?)
+ _LT_TAGVAR(whole_archive_flag_spec, $1)='-z allextract$convenience -z defaultextract'
+ ;;
+ esac
+ _LT_TAGVAR(link_all_deplibs, $1)=yes
+
+ output_verbose_link_cmd='echo'
+
+ # Archives containing C++ object files must be created using
+ # "CC -xar", where "CC" is the Sun C++ compiler. This is
+ # necessary to make sure instantiated templates are included
+ # in the archive.
+ _LT_TAGVAR(old_archive_cmds, $1)='$CC -xar -o $oldlib $oldobjs'
+ ;;
+ gcx*)
+ # Green Hills C++ Compiler
+ _LT_TAGVAR(archive_cmds, $1)='$CC -shared $predep_objects $libobjs $deplibs $postdep_objects $compiler_flags ${wl}-h $wl$soname -o $lib'
+
+ # The C++ compiler must be used to create the archive.
+ _LT_TAGVAR(old_archive_cmds, $1)='$CC $LDFLAGS -archive -o $oldlib $oldobjs'
+ ;;
+ *)
+ # GNU C++ compiler with Solaris linker
+ if test "$GXX" = yes && test "$with_gnu_ld" = no; then
+ _LT_TAGVAR(no_undefined_flag, $1)=' ${wl}-z ${wl}defs'
+ if $CC --version | $GREP -v '^2\.7' > /dev/null; then
+ _LT_TAGVAR(archive_cmds, $1)='$CC -shared -nostdlib $LDFLAGS $predep_objects $libobjs $deplibs $postdep_objects $compiler_flags ${wl}-h $wl$soname -o $lib'
+ _LT_TAGVAR(archive_expsym_cmds, $1)='echo "{ global:" > $lib.exp~cat $export_symbols | $SED -e "s/\(.*\)/\1;/" >> $lib.exp~echo "local: *; };" >> $lib.exp~
+ $CC -shared -nostdlib ${wl}-M $wl$lib.exp -o $lib $predep_objects $libobjs $deplibs $postdep_objects $compiler_flags~$RM $lib.exp'
+
+ # Commands to make compiler produce verbose output that lists
+ # what "hidden" libraries, object files and flags are used when
+ # linking a shared library.
+ output_verbose_link_cmd='$CC -shared $CFLAGS -v conftest.$objext 2>&1 | $GREP "\-L"'
+ else
+ # g++ 2.7 appears to require `-G' NOT `-shared' on this
+ # platform.
+ _LT_TAGVAR(archive_cmds, $1)='$CC -G -nostdlib $LDFLAGS $predep_objects $libobjs $deplibs $postdep_objects $compiler_flags ${wl}-h $wl$soname -o $lib'
+ _LT_TAGVAR(archive_expsym_cmds, $1)='echo "{ global:" > $lib.exp~cat $export_symbols | $SED -e "s/\(.*\)/\1;/" >> $lib.exp~echo "local: *; };" >> $lib.exp~
+ $CC -G -nostdlib ${wl}-M $wl$lib.exp -o $lib $predep_objects $libobjs $deplibs $postdep_objects $compiler_flags~$RM $lib.exp'
+
+ # Commands to make compiler produce verbose output that lists
+ # what "hidden" libraries, object files and flags are used when
+ # linking a shared library.
+ output_verbose_link_cmd='$CC -G $CFLAGS -v conftest.$objext 2>&1 | $GREP "\-L"'
+ fi
+
+ _LT_TAGVAR(hardcode_libdir_flag_spec, $1)='${wl}-R $wl$libdir'
+ case $host_os in
+ solaris2.[[0-5]] | solaris2.[[0-5]].*) ;;
+ *)
+ _LT_TAGVAR(whole_archive_flag_spec, $1)='${wl}-z ${wl}allextract$convenience ${wl}-z ${wl}defaultextract'
+ ;;
+ esac
+ fi
+ ;;
+ esac
+ ;;
+
+ sysv4*uw2* | sysv5OpenUNIX* | sysv5UnixWare7.[[01]].[[10]]* | unixware7* | sco3.2v5.0.[[024]]*)
+ _LT_TAGVAR(no_undefined_flag, $1)='${wl}-z,text'
+ _LT_TAGVAR(archive_cmds_need_lc, $1)=no
+ _LT_TAGVAR(hardcode_shlibpath_var, $1)=no
+ runpath_var='LD_RUN_PATH'
+
+ case $cc_basename in
+ CC*)
+ _LT_TAGVAR(archive_cmds, $1)='$CC -G ${wl}-h,$soname -o $lib $libobjs $deplibs $compiler_flags'
+ _LT_TAGVAR(archive_expsym_cmds, $1)='$CC -G ${wl}-Bexport:$export_symbols ${wl}-h,$soname -o $lib $libobjs $deplibs $compiler_flags'
+ ;;
+ *)
+ _LT_TAGVAR(archive_cmds, $1)='$CC -shared ${wl}-h,$soname -o $lib $libobjs $deplibs $compiler_flags'
+ _LT_TAGVAR(archive_expsym_cmds, $1)='$CC -shared ${wl}-Bexport:$export_symbols ${wl}-h,$soname -o $lib $libobjs $deplibs $compiler_flags'
+ ;;
+ esac
+ ;;
+
+ sysv5* | sco3.2v5* | sco5v6*)
+ # Note: We can NOT use -z defs as we might desire, because we do not
+ # link with -lc, and that would cause any symbols used from libc to
+ # always be unresolved, which means just about no library would
+ # ever link correctly. If we're not using GNU ld we use -z text
+ # though, which does catch some bad symbols but isn't as heavy-handed
+ # as -z defs.
+ _LT_TAGVAR(no_undefined_flag, $1)='${wl}-z,text'
+ _LT_TAGVAR(allow_undefined_flag, $1)='${wl}-z,nodefs'
+ _LT_TAGVAR(archive_cmds_need_lc, $1)=no
+ _LT_TAGVAR(hardcode_shlibpath_var, $1)=no
+ _LT_TAGVAR(hardcode_libdir_flag_spec, $1)='${wl}-R,$libdir'
+ _LT_TAGVAR(hardcode_libdir_separator, $1)=':'
+ _LT_TAGVAR(link_all_deplibs, $1)=yes
+ _LT_TAGVAR(export_dynamic_flag_spec, $1)='${wl}-Bexport'
+ runpath_var='LD_RUN_PATH'
+
+ case $cc_basename in
+ CC*)
+ _LT_TAGVAR(archive_cmds, $1)='$CC -G ${wl}-h,$soname -o $lib $libobjs $deplibs $compiler_flags'
+ _LT_TAGVAR(archive_expsym_cmds, $1)='$CC -G ${wl}-Bexport:$export_symbols ${wl}-h,$soname -o $lib $libobjs $deplibs $compiler_flags'
+ ;;
+ *)
+ _LT_TAGVAR(archive_cmds, $1)='$CC -shared ${wl}-h,$soname -o $lib $libobjs $deplibs $compiler_flags'
+ _LT_TAGVAR(archive_expsym_cmds, $1)='$CC -shared ${wl}-Bexport:$export_symbols ${wl}-h,$soname -o $lib $libobjs $deplibs $compiler_flags'
+ ;;
+ esac
+ ;;
+
+ tandem*)
+ case $cc_basename in
+ NCC*)
+ # NonStop-UX NCC 3.20
+ # FIXME: insert proper C++ library support
+ _LT_TAGVAR(ld_shlibs, $1)=no
+ ;;
+ *)
+ # FIXME: insert proper C++ library support
+ _LT_TAGVAR(ld_shlibs, $1)=no
+ ;;
+ esac
+ ;;
+
+ vxworks*)
+ # FIXME: insert proper C++ library support
+ _LT_TAGVAR(ld_shlibs, $1)=no
+ ;;
+
+ *)
+ # FIXME: insert proper C++ library support
+ _LT_TAGVAR(ld_shlibs, $1)=no
+ ;;
+ esac
+
+ AC_MSG_RESULT([$_LT_TAGVAR(ld_shlibs, $1)])
+ test "$_LT_TAGVAR(ld_shlibs, $1)" = no && can_build_shared=no
+
+ _LT_TAGVAR(GCC, $1)="$GXX"
+ _LT_TAGVAR(LD, $1)="$LD"
+
+ ## CAVEAT EMPTOR:
+ ## There is no encapsulation within the following macros, do not change
+ ## the running order or otherwise move them around unless you know exactly
+ ## what you are doing...
+ _LT_SYS_HIDDEN_LIBDEPS($1)
+ _LT_COMPILER_PIC($1)
+ _LT_COMPILER_C_O($1)
+ _LT_COMPILER_FILE_LOCKS($1)
+ _LT_LINKER_SHLIBS($1)
+ _LT_SYS_DYNAMIC_LINKER($1)
+ _LT_LINKER_HARDCODE_LIBPATH($1)
+
+ _LT_CONFIG($1)
+ fi # test -n "$compiler"
+
+ CC=$lt_save_CC
+ LDCXX=$LD
+ LD=$lt_save_LD
+ GCC=$lt_save_GCC
+ with_gnu_ld=$lt_save_with_gnu_ld
+ lt_cv_path_LDCXX=$lt_cv_path_LD
+ lt_cv_path_LD=$lt_save_path_LD
+ lt_cv_prog_gnu_ldcxx=$lt_cv_prog_gnu_ld
+ lt_cv_prog_gnu_ld=$lt_save_with_gnu_ld
+fi # test "$_lt_caught_CXX_error" != yes
+
+AC_LANG_POP
+])# _LT_LANG_CXX_CONFIG
+
+
+# _LT_SYS_HIDDEN_LIBDEPS([TAGNAME])
+# ---------------------------------
+# Figure out "hidden" library dependencies from verbose
+# compiler output when linking a shared library.
+# Parse the compiler output and extract the necessary
+# objects, libraries and library flags.
+m4_defun([_LT_SYS_HIDDEN_LIBDEPS],
+[m4_require([_LT_FILEUTILS_DEFAULTS])dnl
+# Dependencies to place before and after the object being linked:
+_LT_TAGVAR(predep_objects, $1)=
+_LT_TAGVAR(postdep_objects, $1)=
+_LT_TAGVAR(predeps, $1)=
+_LT_TAGVAR(postdeps, $1)=
+_LT_TAGVAR(compiler_lib_search_path, $1)=
+
+dnl we can't use the lt_simple_compile_test_code here,
+dnl because it contains code intended for an executable,
+dnl not a library. It's possible we should let each
+dnl tag define a new lt_????_link_test_code variable,
+dnl but it's only used here...
+m4_if([$1], [], [cat > conftest.$ac_ext <<_LT_EOF
+int a;
+void foo (void) { a = 0; }
+_LT_EOF
+], [$1], [CXX], [cat > conftest.$ac_ext <<_LT_EOF
+class Foo
+{
+public:
+ Foo (void) { a = 0; }
+private:
+ int a;
+};
+_LT_EOF
+], [$1], [F77], [cat > conftest.$ac_ext <<_LT_EOF
+ subroutine foo
+ implicit none
+ integer*4 a
+ a=0
+ return
+ end
+_LT_EOF
+], [$1], [FC], [cat > conftest.$ac_ext <<_LT_EOF
+ subroutine foo
+ implicit none
+ integer a
+ a=0
+ return
+ end
+_LT_EOF
+], [$1], [GCJ], [cat > conftest.$ac_ext <<_LT_EOF
+public class foo {
+ private int a;
+ public void bar (void) {
+ a = 0;
+ }
+};
+_LT_EOF
+])
+dnl Parse the compiler output and extract the necessary
+dnl objects, libraries and library flags.
+if AC_TRY_EVAL(ac_compile); then
+ # Parse the compiler output and extract the necessary
+ # objects, libraries and library flags.
+
+ # Sentinel used to keep track of whether or not we are before
+ # the conftest object file.
+ pre_test_object_deps_done=no
+
+ for p in `eval "$output_verbose_link_cmd"`; do
+ case $p in
+
+ -L* | -R* | -l*)
+ # Some compilers place space between "-{L,R}" and the path.
+ # Remove the space.
+ if test $p = "-L" ||
+ test $p = "-R"; then
+ prev=$p
+ continue
+ else
+ prev=
+ fi
+
+ if test "$pre_test_object_deps_done" = no; then
+ case $p in
+ -L* | -R*)
+ # Internal compiler library paths should come after those
+ # provided the user. The postdeps already come after the
+ # user supplied libs so there is no need to process them.
+ if test -z "$_LT_TAGVAR(compiler_lib_search_path, $1)"; then
+ _LT_TAGVAR(compiler_lib_search_path, $1)="${prev}${p}"
+ else
+ _LT_TAGVAR(compiler_lib_search_path, $1)="${_LT_TAGVAR(compiler_lib_search_path, $1)} ${prev}${p}"
+ fi
+ ;;
+ # The "-l" case would never come before the object being
+ # linked, so don't bother handling this case.
+ esac
+ else
+ if test -z "$_LT_TAGVAR(postdeps, $1)"; then
+ _LT_TAGVAR(postdeps, $1)="${prev}${p}"
+ else
+ _LT_TAGVAR(postdeps, $1)="${_LT_TAGVAR(postdeps, $1)} ${prev}${p}"
+ fi
+ fi
+ ;;
+
+ *.$objext)
+ # This assumes that the test object file only shows up
+ # once in the compiler output.
+ if test "$p" = "conftest.$objext"; then
+ pre_test_object_deps_done=yes
+ continue
+ fi
+
+ if test "$pre_test_object_deps_done" = no; then
+ if test -z "$_LT_TAGVAR(predep_objects, $1)"; then
+ _LT_TAGVAR(predep_objects, $1)="$p"
+ else
+ _LT_TAGVAR(predep_objects, $1)="$_LT_TAGVAR(predep_objects, $1) $p"
+ fi
+ else
+ if test -z "$_LT_TAGVAR(postdep_objects, $1)"; then
+ _LT_TAGVAR(postdep_objects, $1)="$p"
+ else
+ _LT_TAGVAR(postdep_objects, $1)="$_LT_TAGVAR(postdep_objects, $1) $p"
+ fi
+ fi
+ ;;
+
+ *) ;; # Ignore the rest.
+
+ esac
+ done
+
+ # Clean up.
+ rm -f a.out a.exe
+else
+ echo "libtool.m4: error: problem compiling $1 test program"
+fi
+
+$RM -f confest.$objext
+
+# PORTME: override above test on systems where it is broken
+m4_if([$1], [CXX],
+[case $host_os in
+interix[[3-9]]*)
+ # Interix 3.5 installs completely hosed .la files for C++, so rather than
+ # hack all around it, let's just trust "g++" to DTRT.
+ _LT_TAGVAR(predep_objects,$1)=
+ _LT_TAGVAR(postdep_objects,$1)=
+ _LT_TAGVAR(postdeps,$1)=
+ ;;
+
+linux*)
+ case `$CC -V 2>&1 | sed 5q` in
+ *Sun\ C*)
+ # Sun C++ 5.9
+
+ # The more standards-conforming stlport4 library is
+ # incompatible with the Cstd library. Avoid specifying
+ # it if it's in CXXFLAGS. Ignore libCrun as
+ # -library=stlport4 depends on it.
+ case " $CXX $CXXFLAGS " in
+ *" -library=stlport4 "*)
+ solaris_use_stlport4=yes
+ ;;
+ esac
+
+ if test "$solaris_use_stlport4" != yes; then
+ _LT_TAGVAR(postdeps,$1)='-library=Cstd -library=Crun'
+ fi
+ ;;
+ esac
+ ;;
+
+solaris*)
+ case $cc_basename in
+ CC*)
+ # The more standards-conforming stlport4 library is
+ # incompatible with the Cstd library. Avoid specifying
+ # it if it's in CXXFLAGS. Ignore libCrun as
+ # -library=stlport4 depends on it.
+ case " $CXX $CXXFLAGS " in
+ *" -library=stlport4 "*)
+ solaris_use_stlport4=yes
+ ;;
+ esac
+
+ # Adding this requires a known-good setup of shared libraries for
+ # Sun compiler versions before 5.6, else PIC objects from an old
+ # archive will be linked into the output, leading to subtle bugs.
+ if test "$solaris_use_stlport4" != yes; then
+ _LT_TAGVAR(postdeps,$1)='-library=Cstd -library=Crun'
+ fi
+ ;;
+ esac
+ ;;
+esac
+])
+
+case " $_LT_TAGVAR(postdeps, $1) " in
+*" -lc "*) _LT_TAGVAR(archive_cmds_need_lc, $1)=no ;;
+esac
+ _LT_TAGVAR(compiler_lib_search_dirs, $1)=
+if test -n "${_LT_TAGVAR(compiler_lib_search_path, $1)}"; then
+ _LT_TAGVAR(compiler_lib_search_dirs, $1)=`echo " ${_LT_TAGVAR(compiler_lib_search_path, $1)}" | ${SED} -e 's! -L! !g' -e 's!^ !!'`
+fi
+_LT_TAGDECL([], [compiler_lib_search_dirs], [1],
+ [The directories searched by this compiler when creating a shared library])
+_LT_TAGDECL([], [predep_objects], [1],
+ [Dependencies to place before and after the objects being linked to
+ create a shared library])
+_LT_TAGDECL([], [postdep_objects], [1])
+_LT_TAGDECL([], [predeps], [1])
+_LT_TAGDECL([], [postdeps], [1])
+_LT_TAGDECL([], [compiler_lib_search_path], [1],
+ [The library search path used internally by the compiler when linking
+ a shared library])
+])# _LT_SYS_HIDDEN_LIBDEPS
+
+
+# _LT_PROG_F77
+# ------------
+# Since AC_PROG_F77 is broken, in that it returns the empty string
+# if there is no fortran compiler, we have our own version here.
+m4_defun([_LT_PROG_F77],
+[
+pushdef([AC_MSG_ERROR], [_lt_disable_F77=yes])
+AC_PROG_F77
+if test -z "$F77" || test "X$F77" = "Xno"; then
+ _lt_disable_F77=yes
+fi
+popdef([AC_MSG_ERROR])
+])# _LT_PROG_F77
+
+dnl aclocal-1.4 backwards compatibility:
+dnl AC_DEFUN([_LT_PROG_F77], [])
+
+
+# _LT_LANG_F77_CONFIG([TAG])
+# --------------------------
+# Ensure that the configuration variables for a Fortran 77 compiler are
+# suitably defined. These variables are subsequently used by _LT_CONFIG
+# to write the compiler configuration to `libtool'.
+m4_defun([_LT_LANG_F77_CONFIG],
+[AC_REQUIRE([_LT_PROG_F77])dnl
+AC_LANG_PUSH(Fortran 77)
+
+_LT_TAGVAR(archive_cmds_need_lc, $1)=no
+_LT_TAGVAR(allow_undefined_flag, $1)=
+_LT_TAGVAR(always_export_symbols, $1)=no
+_LT_TAGVAR(archive_expsym_cmds, $1)=
+_LT_TAGVAR(export_dynamic_flag_spec, $1)=
+_LT_TAGVAR(hardcode_direct, $1)=no
+_LT_TAGVAR(hardcode_direct_absolute, $1)=no
+_LT_TAGVAR(hardcode_libdir_flag_spec, $1)=
+_LT_TAGVAR(hardcode_libdir_flag_spec_ld, $1)=
+_LT_TAGVAR(hardcode_libdir_separator, $1)=
+_LT_TAGVAR(hardcode_minus_L, $1)=no
+_LT_TAGVAR(hardcode_automatic, $1)=no
+_LT_TAGVAR(inherit_rpath, $1)=no
+_LT_TAGVAR(module_cmds, $1)=
+_LT_TAGVAR(module_expsym_cmds, $1)=
+_LT_TAGVAR(link_all_deplibs, $1)=unknown
+_LT_TAGVAR(old_archive_cmds, $1)=$old_archive_cmds
+_LT_TAGVAR(no_undefined_flag, $1)=
+_LT_TAGVAR(whole_archive_flag_spec, $1)=
+_LT_TAGVAR(enable_shared_with_static_runtimes, $1)=no
+
+# Source file extension for f77 test sources.
+ac_ext=f
+
+# Object file extension for compiled f77 test sources.
+objext=o
+_LT_TAGVAR(objext, $1)=$objext
+
+# No sense in running all these tests if we already determined that
+# the F77 compiler isn't working. Some variables (like enable_shared)
+# are currently assumed to apply to all compilers on this platform,
+# and will be corrupted by setting them based on a non-working compiler.
+if test "$_lt_disable_F77" != yes; then
+ # Code to be used in simple compile tests
+ lt_simple_compile_test_code="\
+ subroutine t
+ return
+ end
+"
+
+ # Code to be used in simple link tests
+ lt_simple_link_test_code="\
+ program t
+ end
+"
+
+ # ltmain only uses $CC for tagged configurations so make sure $CC is set.
+ _LT_TAG_COMPILER
+
+ # save warnings/boilerplate of simple test code
+ _LT_COMPILER_BOILERPLATE
+ _LT_LINKER_BOILERPLATE
+
+ # Allow CC to be a program name with arguments.
+ lt_save_CC="$CC"
+ lt_save_GCC=$GCC
+ CC=${F77-"f77"}
+ compiler=$CC
+ _LT_TAGVAR(compiler, $1)=$CC
+ _LT_CC_BASENAME([$compiler])
+ GCC=$G77
+ if test -n "$compiler"; then
+ AC_MSG_CHECKING([if libtool supports shared libraries])
+ AC_MSG_RESULT([$can_build_shared])
+
+ AC_MSG_CHECKING([whether to build shared libraries])
+ test "$can_build_shared" = "no" && enable_shared=no
+
+ # On AIX, shared libraries and static libraries use the same namespace, and
+ # are all built from PIC.
+ case $host_os in
+ aix3*)
+ test "$enable_shared" = yes && enable_static=no
+ if test -n "$RANLIB"; then
+ archive_cmds="$archive_cmds~\$RANLIB \$lib"
+ postinstall_cmds='$RANLIB $lib'
+ fi
+ ;;
+ aix[[4-9]]*)
+ if test "$host_cpu" != ia64 && test "$aix_use_runtimelinking" = no ; then
+ test "$enable_shared" = yes && enable_static=no
+ fi
+ ;;
+ esac
+ AC_MSG_RESULT([$enable_shared])
+
+ AC_MSG_CHECKING([whether to build static libraries])
+ # Make sure either enable_shared or enable_static is yes.
+ test "$enable_shared" = yes || enable_static=yes
+ AC_MSG_RESULT([$enable_static])
+
+ _LT_TAGVAR(GCC, $1)="$G77"
+ _LT_TAGVAR(LD, $1)="$LD"
+
+ ## CAVEAT EMPTOR:
+ ## There is no encapsulation within the following macros, do not change
+ ## the running order or otherwise move them around unless you know exactly
+ ## what you are doing...
+ _LT_COMPILER_PIC($1)
+ _LT_COMPILER_C_O($1)
+ _LT_COMPILER_FILE_LOCKS($1)
+ _LT_LINKER_SHLIBS($1)
+ _LT_SYS_DYNAMIC_LINKER($1)
+ _LT_LINKER_HARDCODE_LIBPATH($1)
+
+ _LT_CONFIG($1)
+ fi # test -n "$compiler"
+
+ GCC=$lt_save_GCC
+ CC="$lt_save_CC"
+fi # test "$_lt_disable_F77" != yes
+
+AC_LANG_POP
+])# _LT_LANG_F77_CONFIG
+
+
+# _LT_PROG_FC
+# -----------
+# Since AC_PROG_FC is broken, in that it returns the empty string
+# if there is no fortran compiler, we have our own version here.
+m4_defun([_LT_PROG_FC],
+[
+pushdef([AC_MSG_ERROR], [_lt_disable_FC=yes])
+AC_PROG_FC
+if test -z "$FC" || test "X$FC" = "Xno"; then
+ _lt_disable_FC=yes
+fi
+popdef([AC_MSG_ERROR])
+])# _LT_PROG_FC
+
+dnl aclocal-1.4 backwards compatibility:
+dnl AC_DEFUN([_LT_PROG_FC], [])
+
+
+# _LT_LANG_FC_CONFIG([TAG])
+# -------------------------
+# Ensure that the configuration variables for a Fortran compiler are
+# suitably defined. These variables are subsequently used by _LT_CONFIG
+# to write the compiler configuration to `libtool'.
+m4_defun([_LT_LANG_FC_CONFIG],
+[AC_REQUIRE([_LT_PROG_FC])dnl
+AC_LANG_PUSH(Fortran)
+
+_LT_TAGVAR(archive_cmds_need_lc, $1)=no
+_LT_TAGVAR(allow_undefined_flag, $1)=
+_LT_TAGVAR(always_export_symbols, $1)=no
+_LT_TAGVAR(archive_expsym_cmds, $1)=
+_LT_TAGVAR(export_dynamic_flag_spec, $1)=
+_LT_TAGVAR(hardcode_direct, $1)=no
+_LT_TAGVAR(hardcode_direct_absolute, $1)=no
+_LT_TAGVAR(hardcode_libdir_flag_spec, $1)=
+_LT_TAGVAR(hardcode_libdir_flag_spec_ld, $1)=
+_LT_TAGVAR(hardcode_libdir_separator, $1)=
+_LT_TAGVAR(hardcode_minus_L, $1)=no
+_LT_TAGVAR(hardcode_automatic, $1)=no
+_LT_TAGVAR(inherit_rpath, $1)=no
+_LT_TAGVAR(module_cmds, $1)=
+_LT_TAGVAR(module_expsym_cmds, $1)=
+_LT_TAGVAR(link_all_deplibs, $1)=unknown
+_LT_TAGVAR(old_archive_cmds, $1)=$old_archive_cmds
+_LT_TAGVAR(no_undefined_flag, $1)=
+_LT_TAGVAR(whole_archive_flag_spec, $1)=
+_LT_TAGVAR(enable_shared_with_static_runtimes, $1)=no
+
+# Source file extension for fc test sources.
+ac_ext=${ac_fc_srcext-f}
+
+# Object file extension for compiled fc test sources.
+objext=o
+_LT_TAGVAR(objext, $1)=$objext
+
+# No sense in running all these tests if we already determined that
+# the FC compiler isn't working. Some variables (like enable_shared)
+# are currently assumed to apply to all compilers on this platform,
+# and will be corrupted by setting them based on a non-working compiler.
+if test "$_lt_disable_FC" != yes; then
+ # Code to be used in simple compile tests
+ lt_simple_compile_test_code="\
+ subroutine t
+ return
+ end
+"
+
+ # Code to be used in simple link tests
+ lt_simple_link_test_code="\
+ program t
+ end
+"
+
+ # ltmain only uses $CC for tagged configurations so make sure $CC is set.
+ _LT_TAG_COMPILER
+
+ # save warnings/boilerplate of simple test code
+ _LT_COMPILER_BOILERPLATE
+ _LT_LINKER_BOILERPLATE
+
+ # Allow CC to be a program name with arguments.
+ lt_save_CC="$CC"
+ lt_save_GCC=$GCC
+ CC=${FC-"f95"}
+ compiler=$CC
+ GCC=$ac_cv_fc_compiler_gnu
+
+ _LT_TAGVAR(compiler, $1)=$CC
+ _LT_CC_BASENAME([$compiler])
+
+ if test -n "$compiler"; then
+ AC_MSG_CHECKING([if libtool supports shared libraries])
+ AC_MSG_RESULT([$can_build_shared])
+
+ AC_MSG_CHECKING([whether to build shared libraries])
+ test "$can_build_shared" = "no" && enable_shared=no
+
+ # On AIX, shared libraries and static libraries use the same namespace, and
+ # are all built from PIC.
+ case $host_os in
+ aix3*)
+ test "$enable_shared" = yes && enable_static=no
+ if test -n "$RANLIB"; then
+ archive_cmds="$archive_cmds~\$RANLIB \$lib"
+ postinstall_cmds='$RANLIB $lib'
+ fi
+ ;;
+ aix[[4-9]]*)
+ if test "$host_cpu" != ia64 && test "$aix_use_runtimelinking" = no ; then
+ test "$enable_shared" = yes && enable_static=no
+ fi
+ ;;
+ esac
+ AC_MSG_RESULT([$enable_shared])
+
+ AC_MSG_CHECKING([whether to build static libraries])
+ # Make sure either enable_shared or enable_static is yes.
+ test "$enable_shared" = yes || enable_static=yes
+ AC_MSG_RESULT([$enable_static])
+
+ _LT_TAGVAR(GCC, $1)="$ac_cv_fc_compiler_gnu"
+ _LT_TAGVAR(LD, $1)="$LD"
+
+ ## CAVEAT EMPTOR:
+ ## There is no encapsulation within the following macros, do not change
+ ## the running order or otherwise move them around unless you know exactly
+ ## what you are doing...
+ _LT_SYS_HIDDEN_LIBDEPS($1)
+ _LT_COMPILER_PIC($1)
+ _LT_COMPILER_C_O($1)
+ _LT_COMPILER_FILE_LOCKS($1)
+ _LT_LINKER_SHLIBS($1)
+ _LT_SYS_DYNAMIC_LINKER($1)
+ _LT_LINKER_HARDCODE_LIBPATH($1)
+
+ _LT_CONFIG($1)
+ fi # test -n "$compiler"
+
+ GCC=$lt_save_GCC
+ CC="$lt_save_CC"
+fi # test "$_lt_disable_FC" != yes
+
+AC_LANG_POP
+])# _LT_LANG_FC_CONFIG
+
+
+# _LT_LANG_GCJ_CONFIG([TAG])
+# --------------------------
+# Ensure that the configuration variables for the GNU Java Compiler compiler
+# are suitably defined. These variables are subsequently used by _LT_CONFIG
+# to write the compiler configuration to `libtool'.
+m4_defun([_LT_LANG_GCJ_CONFIG],
+[AC_REQUIRE([LT_PROG_GCJ])dnl
+AC_LANG_SAVE
+
+# Source file extension for Java test sources.
+ac_ext=java
+
+# Object file extension for compiled Java test sources.
+objext=o
+_LT_TAGVAR(objext, $1)=$objext
+
+# Code to be used in simple compile tests
+lt_simple_compile_test_code="class foo {}"
+
+# Code to be used in simple link tests
+lt_simple_link_test_code='public class conftest { public static void main(String[[]] argv) {}; }'
+
+# ltmain only uses $CC for tagged configurations so make sure $CC is set.
+_LT_TAG_COMPILER
+
+# save warnings/boilerplate of simple test code
+_LT_COMPILER_BOILERPLATE
+_LT_LINKER_BOILERPLATE
+
+# Allow CC to be a program name with arguments.
+lt_save_CC="$CC"
+lt_save_GCC=$GCC
+GCC=yes
+CC=${GCJ-"gcj"}
+compiler=$CC
+_LT_TAGVAR(compiler, $1)=$CC
+_LT_TAGVAR(LD, $1)="$LD"
+_LT_CC_BASENAME([$compiler])
+
+# GCJ did not exist at the time GCC didn't implicitly link libc in.
+_LT_TAGVAR(archive_cmds_need_lc, $1)=no
+
+_LT_TAGVAR(old_archive_cmds, $1)=$old_archive_cmds
+
+## CAVEAT EMPTOR:
+## There is no encapsulation within the following macros, do not change
+## the running order or otherwise move them around unless you know exactly
+## what you are doing...
+if test -n "$compiler"; then
+ _LT_COMPILER_NO_RTTI($1)
+ _LT_COMPILER_PIC($1)
+ _LT_COMPILER_C_O($1)
+ _LT_COMPILER_FILE_LOCKS($1)
+ _LT_LINKER_SHLIBS($1)
+ _LT_LINKER_HARDCODE_LIBPATH($1)
+
+ _LT_CONFIG($1)
+fi
+
+AC_LANG_RESTORE
+
+GCC=$lt_save_GCC
+CC="$lt_save_CC"
+])# _LT_LANG_GCJ_CONFIG
+
+
+# _LT_LANG_RC_CONFIG([TAG])
+# -------------------------
+# Ensure that the configuration variables for the Windows resource compiler
+# are suitably defined. These variables are subsequently used by _LT_CONFIG
+# to write the compiler configuration to `libtool'.
+m4_defun([_LT_LANG_RC_CONFIG],
+[AC_REQUIRE([LT_PROG_RC])dnl
+AC_LANG_SAVE
+
+# Source file extension for RC test sources.
+ac_ext=rc
+
+# Object file extension for compiled RC test sources.
+objext=o
+_LT_TAGVAR(objext, $1)=$objext
+
+# Code to be used in simple compile tests
+lt_simple_compile_test_code='sample MENU { MENUITEM "&Soup", 100, CHECKED }'
+
+# Code to be used in simple link tests
+lt_simple_link_test_code="$lt_simple_compile_test_code"
+
+# ltmain only uses $CC for tagged configurations so make sure $CC is set.
+_LT_TAG_COMPILER
+
+# save warnings/boilerplate of simple test code
+_LT_COMPILER_BOILERPLATE
+_LT_LINKER_BOILERPLATE
+
+# Allow CC to be a program name with arguments.
+lt_save_CC="$CC"
+lt_save_GCC=$GCC
+GCC=
+CC=${RC-"windres"}
+compiler=$CC
+_LT_TAGVAR(compiler, $1)=$CC
+_LT_CC_BASENAME([$compiler])
+_LT_TAGVAR(lt_cv_prog_compiler_c_o, $1)=yes
+
+if test -n "$compiler"; then
+ :
+ _LT_CONFIG($1)
+fi
+
+GCC=$lt_save_GCC
+AC_LANG_RESTORE
+CC="$lt_save_CC"
+])# _LT_LANG_RC_CONFIG
+
+
+# LT_PROG_GCJ
+# -----------
+AC_DEFUN([LT_PROG_GCJ],
+[m4_ifdef([AC_PROG_GCJ], [AC_PROG_GCJ],
+ [m4_ifdef([A][M_PROG_GCJ], [A][M_PROG_GCJ],
+ [AC_CHECK_TOOL(GCJ, gcj,)
+ test "x${GCJFLAGS+set}" = xset || GCJFLAGS="-g -O2"
+ AC_SUBST(GCJFLAGS)])])[]dnl
+])
+
+# Old name:
+AU_ALIAS([LT_AC_PROG_GCJ], [LT_PROG_GCJ])
+dnl aclocal-1.4 backwards compatibility:
+dnl AC_DEFUN([LT_AC_PROG_GCJ], [])
+
+
+# LT_PROG_RC
+# ----------
+AC_DEFUN([LT_PROG_RC],
+[AC_CHECK_TOOL(RC, windres,)
+])
+
+# Old name:
+AU_ALIAS([LT_AC_PROG_RC], [LT_PROG_RC])
+dnl aclocal-1.4 backwards compatibility:
+dnl AC_DEFUN([LT_AC_PROG_RC], [])
+
+
+# _LT_DECL_EGREP
+# --------------
+# If we don't have a new enough Autoconf to choose the best grep
+# available, choose the one first in the user's PATH.
+m4_defun([_LT_DECL_EGREP],
+[AC_REQUIRE([AC_PROG_EGREP])dnl
+AC_REQUIRE([AC_PROG_FGREP])dnl
+test -z "$GREP" && GREP=grep
+_LT_DECL([], [GREP], [1], [A grep program that handles long lines])
+_LT_DECL([], [EGREP], [1], [An ERE matcher])
+_LT_DECL([], [FGREP], [1], [A literal string matcher])
+dnl Non-bleeding-edge autoconf doesn't subst GREP, so do it here too
+AC_SUBST([GREP])
+])
+
+
+# _LT_DECL_OBJDUMP
+# --------------
+# If we don't have a new enough Autoconf to choose the best objdump
+# available, choose the one first in the user's PATH.
+m4_defun([_LT_DECL_OBJDUMP],
+[AC_CHECK_TOOL(OBJDUMP, objdump, false)
+test -z "$OBJDUMP" && OBJDUMP=objdump
+_LT_DECL([], [OBJDUMP], [1], [An object symbol dumper])
+AC_SUBST([OBJDUMP])
+])
+
+
+# _LT_DECL_SED
+# ------------
+# Check for a fully-functional sed program, that truncates
+# as few characters as possible. Prefer GNU sed if found.
+m4_defun([_LT_DECL_SED],
+[AC_PROG_SED
+test -z "$SED" && SED=sed
+Xsed="$SED -e 1s/^X//"
+_LT_DECL([], [SED], [1], [A sed program that does not truncate output])
+_LT_DECL([], [Xsed], ["\$SED -e 1s/^X//"],
+ [Sed that helps us avoid accidentally triggering echo(1) options like -n])
+])# _LT_DECL_SED
+
+m4_ifndef([AC_PROG_SED], [
+############################################################
+# NOTE: This macro has been submitted for inclusion into #
+# GNU Autoconf as AC_PROG_SED. When it is available in #
+# a released version of Autoconf we should remove this #
+# macro and use it instead. #
+############################################################
+
+m4_defun([AC_PROG_SED],
+[AC_MSG_CHECKING([for a sed that does not truncate output])
+AC_CACHE_VAL(lt_cv_path_SED,
+[# Loop through the user's path and test for sed and gsed.
+# Then use that list of sed's as ones to test for truncation.
+as_save_IFS=$IFS; IFS=$PATH_SEPARATOR
+for as_dir in $PATH
+do
+ IFS=$as_save_IFS
+ test -z "$as_dir" && as_dir=.
+ for lt_ac_prog in sed gsed; do
+ for ac_exec_ext in '' $ac_executable_extensions; do
+ if $as_executable_p "$as_dir/$lt_ac_prog$ac_exec_ext"; then
+ lt_ac_sed_list="$lt_ac_sed_list $as_dir/$lt_ac_prog$ac_exec_ext"
+ fi
+ done
+ done
+done
+IFS=$as_save_IFS
+lt_ac_max=0
+lt_ac_count=0
+# Add /usr/xpg4/bin/sed as it is typically found on Solaris
+# along with /bin/sed that truncates output.
+for lt_ac_sed in $lt_ac_sed_list /usr/xpg4/bin/sed; do
+ test ! -f $lt_ac_sed && continue
+ cat /dev/null > conftest.in
+ lt_ac_count=0
+ echo $ECHO_N "0123456789$ECHO_C" >conftest.in
+ # Check for GNU sed and select it if it is found.
+ if "$lt_ac_sed" --version 2>&1 < /dev/null | grep 'GNU' > /dev/null; then
+ lt_cv_path_SED=$lt_ac_sed
+ break
+ fi
+ while true; do
+ cat conftest.in conftest.in >conftest.tmp
+ mv conftest.tmp conftest.in
+ cp conftest.in conftest.nl
+ echo >>conftest.nl
+ $lt_ac_sed -e 's/a$//' < conftest.nl >conftest.out || break
+ cmp -s conftest.out conftest.nl || break
+ # 10000 chars as input seems more than enough
+ test $lt_ac_count -gt 10 && break
+ lt_ac_count=`expr $lt_ac_count + 1`
+ if test $lt_ac_count -gt $lt_ac_max; then
+ lt_ac_max=$lt_ac_count
+ lt_cv_path_SED=$lt_ac_sed
+ fi
+ done
+done
+])
+SED=$lt_cv_path_SED
+AC_SUBST([SED])
+AC_MSG_RESULT([$SED])
+])#AC_PROG_SED
+])#m4_ifndef
+
+# Old name:
+AU_ALIAS([LT_AC_PROG_SED], [AC_PROG_SED])
+dnl aclocal-1.4 backwards compatibility:
+dnl AC_DEFUN([LT_AC_PROG_SED], [])
+
+
+# _LT_CHECK_SHELL_FEATURES
+# ------------------------
+# Find out whether the shell is Bourne or XSI compatible,
+# or has some other useful features.
+m4_defun([_LT_CHECK_SHELL_FEATURES],
+[AC_MSG_CHECKING([whether the shell understands some XSI constructs])
+# Try some XSI features
+xsi_shell=no
+( _lt_dummy="a/b/c"
+ test "${_lt_dummy##*/},${_lt_dummy%/*},"${_lt_dummy%"$_lt_dummy"}, \
+ = c,a/b,, \
+ && eval 'test $(( 1 + 1 )) -eq 2 \
+ && test "${#_lt_dummy}" -eq 5' ) >/dev/null 2>&1 \
+ && xsi_shell=yes
+AC_MSG_RESULT([$xsi_shell])
+_LT_CONFIG_LIBTOOL_INIT([xsi_shell='$xsi_shell'])
+
+AC_MSG_CHECKING([whether the shell understands "+="])
+lt_shell_append=no
+( foo=bar; set foo baz; eval "$[1]+=\$[2]" && test "$foo" = barbaz ) \
+ >/dev/null 2>&1 \
+ && lt_shell_append=yes
+AC_MSG_RESULT([$lt_shell_append])
+_LT_CONFIG_LIBTOOL_INIT([lt_shell_append='$lt_shell_append'])
+
+if ( (MAIL=60; unset MAIL) || exit) >/dev/null 2>&1; then
+ lt_unset=unset
+else
+ lt_unset=false
+fi
+_LT_DECL([], [lt_unset], [0], [whether the shell understands "unset"])dnl
+
+# test EBCDIC or ASCII
+case `echo X|tr X '\101'` in
+ A) # ASCII based system
+ # \n is not interpreted correctly by Solaris 8 /usr/ucb/tr
+ lt_SP2NL='tr \040 \012'
+ lt_NL2SP='tr \015\012 \040\040'
+ ;;
+ *) # EBCDIC based system
+ lt_SP2NL='tr \100 \n'
+ lt_NL2SP='tr \r\n \100\100'
+ ;;
+esac
+_LT_DECL([SP2NL], [lt_SP2NL], [1], [turn spaces into newlines])dnl
+_LT_DECL([NL2SP], [lt_NL2SP], [1], [turn newlines into spaces])dnl
+])# _LT_CHECK_SHELL_FEATURES
+
+
+# _LT_PROG_XSI_SHELLFNS
+# ---------------------
+# Bourne and XSI compatible variants of some useful shell functions.
+m4_defun([_LT_PROG_XSI_SHELLFNS],
+[case $xsi_shell in
+ yes)
+ cat << \_LT_EOF >> "$cfgfile"
+
+# func_dirname file append nondir_replacement
+# Compute the dirname of FILE. If nonempty, add APPEND to the result,
+# otherwise set result to NONDIR_REPLACEMENT.
+func_dirname ()
+{
+ case ${1} in
+ */*) func_dirname_result="${1%/*}${2}" ;;
+ * ) func_dirname_result="${3}" ;;
+ esac
+}
+
+# func_basename file
+func_basename ()
+{
+ func_basename_result="${1##*/}"
+}
+
+# func_dirname_and_basename file append nondir_replacement
+# perform func_basename and func_dirname in a single function
+# call:
+# dirname: Compute the dirname of FILE. If nonempty,
+# add APPEND to the result, otherwise set result
+# to NONDIR_REPLACEMENT.
+# value returned in "$func_dirname_result"
+# basename: Compute filename of FILE.
+# value retuned in "$func_basename_result"
+# Implementation must be kept synchronized with func_dirname
+# and func_basename. For efficiency, we do not delegate to
+# those functions but instead duplicate the functionality here.
+func_dirname_and_basename ()
+{
+ case ${1} in
+ */*) func_dirname_result="${1%/*}${2}" ;;
+ * ) func_dirname_result="${3}" ;;
+ esac
+ func_basename_result="${1##*/}"
+}
+
+# func_stripname prefix suffix name
+# strip PREFIX and SUFFIX off of NAME.
+# PREFIX and SUFFIX must not contain globbing or regex special
+# characters, hashes, percent signs, but SUFFIX may contain a leading
+# dot (in which case that matches only a dot).
+func_stripname ()
+{
+ # pdksh 5.2.14 does not do ${X%$Y} correctly if both X and Y are
+ # positional parameters, so assign one to ordinary parameter first.
+ func_stripname_result=${3}
+ func_stripname_result=${func_stripname_result#"${1}"}
+ func_stripname_result=${func_stripname_result%"${2}"}
+}
+
+# func_opt_split
+func_opt_split ()
+{
+ func_opt_split_opt=${1%%=*}
+ func_opt_split_arg=${1#*=}
+}
+
+# func_lo2o object
+func_lo2o ()
+{
+ case ${1} in
+ *.lo) func_lo2o_result=${1%.lo}.${objext} ;;
+ *) func_lo2o_result=${1} ;;
+ esac
+}
+
+# func_xform libobj-or-source
+func_xform ()
+{
+ func_xform_result=${1%.*}.lo
+}
+
+# func_arith arithmetic-term...
+func_arith ()
+{
+ func_arith_result=$(( $[*] ))
+}
+
+# func_len string
+# STRING may not start with a hyphen.
+func_len ()
+{
+ func_len_result=${#1}
+}
+
+_LT_EOF
+ ;;
+ *) # Bourne compatible functions.
+ cat << \_LT_EOF >> "$cfgfile"
+
+# func_dirname file append nondir_replacement
+# Compute the dirname of FILE. If nonempty, add APPEND to the result,
+# otherwise set result to NONDIR_REPLACEMENT.
+func_dirname ()
+{
+ # Extract subdirectory from the argument.
+ func_dirname_result=`$ECHO "X${1}" | $Xsed -e "$dirname"`
+ if test "X$func_dirname_result" = "X${1}"; then
+ func_dirname_result="${3}"
+ else
+ func_dirname_result="$func_dirname_result${2}"
+ fi
+}
+
+# func_basename file
+func_basename ()
+{
+ func_basename_result=`$ECHO "X${1}" | $Xsed -e "$basename"`
+}
+
+dnl func_dirname_and_basename
+dnl A portable version of this function is already defined in general.m4sh
+dnl so there is no need for it here.
+
+# func_stripname prefix suffix name
+# strip PREFIX and SUFFIX off of NAME.
+# PREFIX and SUFFIX must not contain globbing or regex special
+# characters, hashes, percent signs, but SUFFIX may contain a leading
+# dot (in which case that matches only a dot).
+# func_strip_suffix prefix name
+func_stripname ()
+{
+ case ${2} in
+ .*) func_stripname_result=`$ECHO "X${3}" \
+ | $Xsed -e "s%^${1}%%" -e "s%\\\\${2}\$%%"`;;
+ *) func_stripname_result=`$ECHO "X${3}" \
+ | $Xsed -e "s%^${1}%%" -e "s%${2}\$%%"`;;
+ esac
+}
+
+# sed scripts:
+my_sed_long_opt='1s/^\(-[[^=]]*\)=.*/\1/;q'
+my_sed_long_arg='1s/^-[[^=]]*=//'
+
+# func_opt_split
+func_opt_split ()
+{
+ func_opt_split_opt=`$ECHO "X${1}" | $Xsed -e "$my_sed_long_opt"`
+ func_opt_split_arg=`$ECHO "X${1}" | $Xsed -e "$my_sed_long_arg"`
+}
+
+# func_lo2o object
+func_lo2o ()
+{
+ func_lo2o_result=`$ECHO "X${1}" | $Xsed -e "$lo2o"`
+}
+
+# func_xform libobj-or-source
+func_xform ()
+{
+ func_xform_result=`$ECHO "X${1}" | $Xsed -e 's/\.[[^.]]*$/.lo/'`
+}
+
+# func_arith arithmetic-term...
+func_arith ()
+{
+ func_arith_result=`expr "$[@]"`
+}
+
+# func_len string
+# STRING may not start with a hyphen.
+func_len ()
+{
+ func_len_result=`expr "$[1]" : ".*" 2>/dev/null || echo $max_cmd_len`
+}
+
+_LT_EOF
+esac
+
+case $lt_shell_append in
+ yes)
+ cat << \_LT_EOF >> "$cfgfile"
+
+# func_append var value
+# Append VALUE to the end of shell variable VAR.
+func_append ()
+{
+ eval "$[1]+=\$[2]"
+}
+_LT_EOF
+ ;;
+ *)
+ cat << \_LT_EOF >> "$cfgfile"
+
+# func_append var value
+# Append VALUE to the end of shell variable VAR.
+func_append ()
+{
+ eval "$[1]=\$$[1]\$[2]"
+}
+
+_LT_EOF
+ ;;
+ esac
+])
diff --git a/Build/source/utils/xz-4.999.9beta/m4/ltoptions.m4 b/Build/source/utils/xz-4.999.9beta/m4/ltoptions.m4
new file mode 100644
index 00000000000..34151a3ba62
--- /dev/null
+++ b/Build/source/utils/xz-4.999.9beta/m4/ltoptions.m4
@@ -0,0 +1,368 @@
+# Helper functions for option handling. -*- Autoconf -*-
+#
+# Copyright (C) 2004, 2005, 2007, 2008 Free Software Foundation, Inc.
+# Written by Gary V. Vaughan, 2004
+#
+# This file is free software; the Free Software Foundation gives
+# unlimited permission to copy and/or distribute it, with or without
+# modifications, as long as this notice is preserved.
+
+# serial 6 ltoptions.m4
+
+# This is to help aclocal find these macros, as it can't see m4_define.
+AC_DEFUN([LTOPTIONS_VERSION], [m4_if([1])])
+
+
+# _LT_MANGLE_OPTION(MACRO-NAME, OPTION-NAME)
+# ------------------------------------------
+m4_define([_LT_MANGLE_OPTION],
+[[_LT_OPTION_]m4_bpatsubst($1__$2, [[^a-zA-Z0-9_]], [_])])
+
+
+# _LT_SET_OPTION(MACRO-NAME, OPTION-NAME)
+# ---------------------------------------
+# Set option OPTION-NAME for macro MACRO-NAME, and if there is a
+# matching handler defined, dispatch to it. Other OPTION-NAMEs are
+# saved as a flag.
+m4_define([_LT_SET_OPTION],
+[m4_define(_LT_MANGLE_OPTION([$1], [$2]))dnl
+m4_ifdef(_LT_MANGLE_DEFUN([$1], [$2]),
+ _LT_MANGLE_DEFUN([$1], [$2]),
+ [m4_warning([Unknown $1 option `$2'])])[]dnl
+])
+
+
+# _LT_IF_OPTION(MACRO-NAME, OPTION-NAME, IF-SET, [IF-NOT-SET])
+# ------------------------------------------------------------
+# Execute IF-SET if OPTION is set, IF-NOT-SET otherwise.
+m4_define([_LT_IF_OPTION],
+[m4_ifdef(_LT_MANGLE_OPTION([$1], [$2]), [$3], [$4])])
+
+
+# _LT_UNLESS_OPTIONS(MACRO-NAME, OPTION-LIST, IF-NOT-SET)
+# -------------------------------------------------------
+# Execute IF-NOT-SET unless all options in OPTION-LIST for MACRO-NAME
+# are set.
+m4_define([_LT_UNLESS_OPTIONS],
+[m4_foreach([_LT_Option], m4_split(m4_normalize([$2])),
+ [m4_ifdef(_LT_MANGLE_OPTION([$1], _LT_Option),
+ [m4_define([$0_found])])])[]dnl
+m4_ifdef([$0_found], [m4_undefine([$0_found])], [$3
+])[]dnl
+])
+
+
+# _LT_SET_OPTIONS(MACRO-NAME, OPTION-LIST)
+# ----------------------------------------
+# OPTION-LIST is a space-separated list of Libtool options associated
+# with MACRO-NAME. If any OPTION has a matching handler declared with
+# LT_OPTION_DEFINE, dispatch to that macro; otherwise complain about
+# the unknown option and exit.
+m4_defun([_LT_SET_OPTIONS],
+[# Set options
+m4_foreach([_LT_Option], m4_split(m4_normalize([$2])),
+ [_LT_SET_OPTION([$1], _LT_Option)])
+
+m4_if([$1],[LT_INIT],[
+ dnl
+ dnl Simply set some default values (i.e off) if boolean options were not
+ dnl specified:
+ _LT_UNLESS_OPTIONS([LT_INIT], [dlopen], [enable_dlopen=no
+ ])
+ _LT_UNLESS_OPTIONS([LT_INIT], [win32-dll], [enable_win32_dll=no
+ ])
+ dnl
+ dnl If no reference was made to various pairs of opposing options, then
+ dnl we run the default mode handler for the pair. For example, if neither
+ dnl `shared' nor `disable-shared' was passed, we enable building of shared
+ dnl archives by default:
+ _LT_UNLESS_OPTIONS([LT_INIT], [shared disable-shared], [_LT_ENABLE_SHARED])
+ _LT_UNLESS_OPTIONS([LT_INIT], [static disable-static], [_LT_ENABLE_STATIC])
+ _LT_UNLESS_OPTIONS([LT_INIT], [pic-only no-pic], [_LT_WITH_PIC])
+ _LT_UNLESS_OPTIONS([LT_INIT], [fast-install disable-fast-install],
+ [_LT_ENABLE_FAST_INSTALL])
+ ])
+])# _LT_SET_OPTIONS
+
+
+## --------------------------------- ##
+## Macros to handle LT_INIT options. ##
+## --------------------------------- ##
+
+# _LT_MANGLE_DEFUN(MACRO-NAME, OPTION-NAME)
+# -----------------------------------------
+m4_define([_LT_MANGLE_DEFUN],
+[[_LT_OPTION_DEFUN_]m4_bpatsubst(m4_toupper([$1__$2]), [[^A-Z0-9_]], [_])])
+
+
+# LT_OPTION_DEFINE(MACRO-NAME, OPTION-NAME, CODE)
+# -----------------------------------------------
+m4_define([LT_OPTION_DEFINE],
+[m4_define(_LT_MANGLE_DEFUN([$1], [$2]), [$3])[]dnl
+])# LT_OPTION_DEFINE
+
+
+# dlopen
+# ------
+LT_OPTION_DEFINE([LT_INIT], [dlopen], [enable_dlopen=yes
+])
+
+AU_DEFUN([AC_LIBTOOL_DLOPEN],
+[_LT_SET_OPTION([LT_INIT], [dlopen])
+AC_DIAGNOSE([obsolete],
+[$0: Remove this warning and the call to _LT_SET_OPTION when you
+put the `dlopen' option into LT_INIT's first parameter.])
+])
+
+dnl aclocal-1.4 backwards compatibility:
+dnl AC_DEFUN([AC_LIBTOOL_DLOPEN], [])
+
+
+# win32-dll
+# ---------
+# Declare package support for building win32 dll's.
+LT_OPTION_DEFINE([LT_INIT], [win32-dll],
+[enable_win32_dll=yes
+
+case $host in
+*-*-cygwin* | *-*-mingw* | *-*-pw32* | *-cegcc*)
+ AC_CHECK_TOOL(AS, as, false)
+ AC_CHECK_TOOL(DLLTOOL, dlltool, false)
+ AC_CHECK_TOOL(OBJDUMP, objdump, false)
+ ;;
+esac
+
+test -z "$AS" && AS=as
+_LT_DECL([], [AS], [0], [Assembler program])dnl
+
+test -z "$DLLTOOL" && DLLTOOL=dlltool
+_LT_DECL([], [DLLTOOL], [0], [DLL creation program])dnl
+
+test -z "$OBJDUMP" && OBJDUMP=objdump
+_LT_DECL([], [OBJDUMP], [0], [Object dumper program])dnl
+])# win32-dll
+
+AU_DEFUN([AC_LIBTOOL_WIN32_DLL],
+[AC_REQUIRE([AC_CANONICAL_HOST])dnl
+_LT_SET_OPTION([LT_INIT], [win32-dll])
+AC_DIAGNOSE([obsolete],
+[$0: Remove this warning and the call to _LT_SET_OPTION when you
+put the `win32-dll' option into LT_INIT's first parameter.])
+])
+
+dnl aclocal-1.4 backwards compatibility:
+dnl AC_DEFUN([AC_LIBTOOL_WIN32_DLL], [])
+
+
+# _LT_ENABLE_SHARED([DEFAULT])
+# ----------------------------
+# implement the --enable-shared flag, and supports the `shared' and
+# `disable-shared' LT_INIT options.
+# DEFAULT is either `yes' or `no'. If omitted, it defaults to `yes'.
+m4_define([_LT_ENABLE_SHARED],
+[m4_define([_LT_ENABLE_SHARED_DEFAULT], [m4_if($1, no, no, yes)])dnl
+AC_ARG_ENABLE([shared],
+ [AS_HELP_STRING([--enable-shared@<:@=PKGS@:>@],
+ [build shared libraries @<:@default=]_LT_ENABLE_SHARED_DEFAULT[@:>@])],
+ [p=${PACKAGE-default}
+ case $enableval in
+ yes) enable_shared=yes ;;
+ no) enable_shared=no ;;
+ *)
+ enable_shared=no
+ # Look at the argument we got. We use all the common list separators.
+ lt_save_ifs="$IFS"; IFS="${IFS}$PATH_SEPARATOR,"
+ for pkg in $enableval; do
+ IFS="$lt_save_ifs"
+ if test "X$pkg" = "X$p"; then
+ enable_shared=yes
+ fi
+ done
+ IFS="$lt_save_ifs"
+ ;;
+ esac],
+ [enable_shared=]_LT_ENABLE_SHARED_DEFAULT)
+
+ _LT_DECL([build_libtool_libs], [enable_shared], [0],
+ [Whether or not to build shared libraries])
+])# _LT_ENABLE_SHARED
+
+LT_OPTION_DEFINE([LT_INIT], [shared], [_LT_ENABLE_SHARED([yes])])
+LT_OPTION_DEFINE([LT_INIT], [disable-shared], [_LT_ENABLE_SHARED([no])])
+
+# Old names:
+AC_DEFUN([AC_ENABLE_SHARED],
+[_LT_SET_OPTION([LT_INIT], m4_if([$1], [no], [disable-])[shared])
+])
+
+AC_DEFUN([AC_DISABLE_SHARED],
+[_LT_SET_OPTION([LT_INIT], [disable-shared])
+])
+
+AU_DEFUN([AM_ENABLE_SHARED], [AC_ENABLE_SHARED($@)])
+AU_DEFUN([AM_DISABLE_SHARED], [AC_DISABLE_SHARED($@)])
+
+dnl aclocal-1.4 backwards compatibility:
+dnl AC_DEFUN([AM_ENABLE_SHARED], [])
+dnl AC_DEFUN([AM_DISABLE_SHARED], [])
+
+
+
+# _LT_ENABLE_STATIC([DEFAULT])
+# ----------------------------
+# implement the --enable-static flag, and support the `static' and
+# `disable-static' LT_INIT options.
+# DEFAULT is either `yes' or `no'. If omitted, it defaults to `yes'.
+m4_define([_LT_ENABLE_STATIC],
+[m4_define([_LT_ENABLE_STATIC_DEFAULT], [m4_if($1, no, no, yes)])dnl
+AC_ARG_ENABLE([static],
+ [AS_HELP_STRING([--enable-static@<:@=PKGS@:>@],
+ [build static libraries @<:@default=]_LT_ENABLE_STATIC_DEFAULT[@:>@])],
+ [p=${PACKAGE-default}
+ case $enableval in
+ yes) enable_static=yes ;;
+ no) enable_static=no ;;
+ *)
+ enable_static=no
+ # Look at the argument we got. We use all the common list separators.
+ lt_save_ifs="$IFS"; IFS="${IFS}$PATH_SEPARATOR,"
+ for pkg in $enableval; do
+ IFS="$lt_save_ifs"
+ if test "X$pkg" = "X$p"; then
+ enable_static=yes
+ fi
+ done
+ IFS="$lt_save_ifs"
+ ;;
+ esac],
+ [enable_static=]_LT_ENABLE_STATIC_DEFAULT)
+
+ _LT_DECL([build_old_libs], [enable_static], [0],
+ [Whether or not to build static libraries])
+])# _LT_ENABLE_STATIC
+
+LT_OPTION_DEFINE([LT_INIT], [static], [_LT_ENABLE_STATIC([yes])])
+LT_OPTION_DEFINE([LT_INIT], [disable-static], [_LT_ENABLE_STATIC([no])])
+
+# Old names:
+AC_DEFUN([AC_ENABLE_STATIC],
+[_LT_SET_OPTION([LT_INIT], m4_if([$1], [no], [disable-])[static])
+])
+
+AC_DEFUN([AC_DISABLE_STATIC],
+[_LT_SET_OPTION([LT_INIT], [disable-static])
+])
+
+AU_DEFUN([AM_ENABLE_STATIC], [AC_ENABLE_STATIC($@)])
+AU_DEFUN([AM_DISABLE_STATIC], [AC_DISABLE_STATIC($@)])
+
+dnl aclocal-1.4 backwards compatibility:
+dnl AC_DEFUN([AM_ENABLE_STATIC], [])
+dnl AC_DEFUN([AM_DISABLE_STATIC], [])
+
+
+
+# _LT_ENABLE_FAST_INSTALL([DEFAULT])
+# ----------------------------------
+# implement the --enable-fast-install flag, and support the `fast-install'
+# and `disable-fast-install' LT_INIT options.
+# DEFAULT is either `yes' or `no'. If omitted, it defaults to `yes'.
+m4_define([_LT_ENABLE_FAST_INSTALL],
+[m4_define([_LT_ENABLE_FAST_INSTALL_DEFAULT], [m4_if($1, no, no, yes)])dnl
+AC_ARG_ENABLE([fast-install],
+ [AS_HELP_STRING([--enable-fast-install@<:@=PKGS@:>@],
+ [optimize for fast installation @<:@default=]_LT_ENABLE_FAST_INSTALL_DEFAULT[@:>@])],
+ [p=${PACKAGE-default}
+ case $enableval in
+ yes) enable_fast_install=yes ;;
+ no) enable_fast_install=no ;;
+ *)
+ enable_fast_install=no
+ # Look at the argument we got. We use all the common list separators.
+ lt_save_ifs="$IFS"; IFS="${IFS}$PATH_SEPARATOR,"
+ for pkg in $enableval; do
+ IFS="$lt_save_ifs"
+ if test "X$pkg" = "X$p"; then
+ enable_fast_install=yes
+ fi
+ done
+ IFS="$lt_save_ifs"
+ ;;
+ esac],
+ [enable_fast_install=]_LT_ENABLE_FAST_INSTALL_DEFAULT)
+
+_LT_DECL([fast_install], [enable_fast_install], [0],
+ [Whether or not to optimize for fast installation])dnl
+])# _LT_ENABLE_FAST_INSTALL
+
+LT_OPTION_DEFINE([LT_INIT], [fast-install], [_LT_ENABLE_FAST_INSTALL([yes])])
+LT_OPTION_DEFINE([LT_INIT], [disable-fast-install], [_LT_ENABLE_FAST_INSTALL([no])])
+
+# Old names:
+AU_DEFUN([AC_ENABLE_FAST_INSTALL],
+[_LT_SET_OPTION([LT_INIT], m4_if([$1], [no], [disable-])[fast-install])
+AC_DIAGNOSE([obsolete],
+[$0: Remove this warning and the call to _LT_SET_OPTION when you put
+the `fast-install' option into LT_INIT's first parameter.])
+])
+
+AU_DEFUN([AC_DISABLE_FAST_INSTALL],
+[_LT_SET_OPTION([LT_INIT], [disable-fast-install])
+AC_DIAGNOSE([obsolete],
+[$0: Remove this warning and the call to _LT_SET_OPTION when you put
+the `disable-fast-install' option into LT_INIT's first parameter.])
+])
+
+dnl aclocal-1.4 backwards compatibility:
+dnl AC_DEFUN([AC_ENABLE_FAST_INSTALL], [])
+dnl AC_DEFUN([AM_DISABLE_FAST_INSTALL], [])
+
+
+# _LT_WITH_PIC([MODE])
+# --------------------
+# implement the --with-pic flag, and support the `pic-only' and `no-pic'
+# LT_INIT options.
+# MODE is either `yes' or `no'. If omitted, it defaults to `both'.
+m4_define([_LT_WITH_PIC],
+[AC_ARG_WITH([pic],
+ [AS_HELP_STRING([--with-pic],
+ [try to use only PIC/non-PIC objects @<:@default=use both@:>@])],
+ [pic_mode="$withval"],
+ [pic_mode=default])
+
+test -z "$pic_mode" && pic_mode=m4_default([$1], [default])
+
+_LT_DECL([], [pic_mode], [0], [What type of objects to build])dnl
+])# _LT_WITH_PIC
+
+LT_OPTION_DEFINE([LT_INIT], [pic-only], [_LT_WITH_PIC([yes])])
+LT_OPTION_DEFINE([LT_INIT], [no-pic], [_LT_WITH_PIC([no])])
+
+# Old name:
+AU_DEFUN([AC_LIBTOOL_PICMODE],
+[_LT_SET_OPTION([LT_INIT], [pic-only])
+AC_DIAGNOSE([obsolete],
+[$0: Remove this warning and the call to _LT_SET_OPTION when you
+put the `pic-only' option into LT_INIT's first parameter.])
+])
+
+dnl aclocal-1.4 backwards compatibility:
+dnl AC_DEFUN([AC_LIBTOOL_PICMODE], [])
+
+## ----------------- ##
+## LTDL_INIT Options ##
+## ----------------- ##
+
+m4_define([_LTDL_MODE], [])
+LT_OPTION_DEFINE([LTDL_INIT], [nonrecursive],
+ [m4_define([_LTDL_MODE], [nonrecursive])])
+LT_OPTION_DEFINE([LTDL_INIT], [recursive],
+ [m4_define([_LTDL_MODE], [recursive])])
+LT_OPTION_DEFINE([LTDL_INIT], [subproject],
+ [m4_define([_LTDL_MODE], [subproject])])
+
+m4_define([_LTDL_TYPE], [])
+LT_OPTION_DEFINE([LTDL_INIT], [installable],
+ [m4_define([_LTDL_TYPE], [installable])])
+LT_OPTION_DEFINE([LTDL_INIT], [convenience],
+ [m4_define([_LTDL_TYPE], [convenience])])
diff --git a/Build/source/utils/xz-4.999.9beta/m4/ltsugar.m4 b/Build/source/utils/xz-4.999.9beta/m4/ltsugar.m4
new file mode 100644
index 00000000000..9000a057d31
--- /dev/null
+++ b/Build/source/utils/xz-4.999.9beta/m4/ltsugar.m4
@@ -0,0 +1,123 @@
+# ltsugar.m4 -- libtool m4 base layer. -*-Autoconf-*-
+#
+# Copyright (C) 2004, 2005, 2007, 2008 Free Software Foundation, Inc.
+# Written by Gary V. Vaughan, 2004
+#
+# This file is free software; the Free Software Foundation gives
+# unlimited permission to copy and/or distribute it, with or without
+# modifications, as long as this notice is preserved.
+
+# serial 6 ltsugar.m4
+
+# This is to help aclocal find these macros, as it can't see m4_define.
+AC_DEFUN([LTSUGAR_VERSION], [m4_if([0.1])])
+
+
+# lt_join(SEP, ARG1, [ARG2...])
+# -----------------------------
+# Produce ARG1SEPARG2...SEPARGn, omitting [] arguments and their
+# associated separator.
+# Needed until we can rely on m4_join from Autoconf 2.62, since all earlier
+# versions in m4sugar had bugs.
+m4_define([lt_join],
+[m4_if([$#], [1], [],
+ [$#], [2], [[$2]],
+ [m4_if([$2], [], [], [[$2]_])$0([$1], m4_shift(m4_shift($@)))])])
+m4_define([_lt_join],
+[m4_if([$#$2], [2], [],
+ [m4_if([$2], [], [], [[$1$2]])$0([$1], m4_shift(m4_shift($@)))])])
+
+
+# lt_car(LIST)
+# lt_cdr(LIST)
+# ------------
+# Manipulate m4 lists.
+# These macros are necessary as long as will still need to support
+# Autoconf-2.59 which quotes differently.
+m4_define([lt_car], [[$1]])
+m4_define([lt_cdr],
+[m4_if([$#], 0, [m4_fatal([$0: cannot be called without arguments])],
+ [$#], 1, [],
+ [m4_dquote(m4_shift($@))])])
+m4_define([lt_unquote], $1)
+
+
+# lt_append(MACRO-NAME, STRING, [SEPARATOR])
+# ------------------------------------------
+# Redefine MACRO-NAME to hold its former content plus `SEPARATOR'`STRING'.
+# Note that neither SEPARATOR nor STRING are expanded; they are appended
+# to MACRO-NAME as is (leaving the expansion for when MACRO-NAME is invoked).
+# No SEPARATOR is output if MACRO-NAME was previously undefined (different
+# than defined and empty).
+#
+# This macro is needed until we can rely on Autoconf 2.62, since earlier
+# versions of m4sugar mistakenly expanded SEPARATOR but not STRING.
+m4_define([lt_append],
+[m4_define([$1],
+ m4_ifdef([$1], [m4_defn([$1])[$3]])[$2])])
+
+
+
+# lt_combine(SEP, PREFIX-LIST, INFIX, SUFFIX1, [SUFFIX2...])
+# ----------------------------------------------------------
+# Produce a SEP delimited list of all paired combinations of elements of
+# PREFIX-LIST with SUFFIX1 through SUFFIXn. Each element of the list
+# has the form PREFIXmINFIXSUFFIXn.
+# Needed until we can rely on m4_combine added in Autoconf 2.62.
+m4_define([lt_combine],
+[m4_if(m4_eval([$# > 3]), [1],
+ [m4_pushdef([_Lt_sep], [m4_define([_Lt_sep], m4_defn([lt_car]))])]]dnl
+[[m4_foreach([_Lt_prefix], [$2],
+ [m4_foreach([_Lt_suffix],
+ ]m4_dquote(m4_dquote(m4_shift(m4_shift(m4_shift($@)))))[,
+ [_Lt_sep([$1])[]m4_defn([_Lt_prefix])[$3]m4_defn([_Lt_suffix])])])])])
+
+
+# lt_if_append_uniq(MACRO-NAME, VARNAME, [SEPARATOR], [UNIQ], [NOT-UNIQ])
+# -----------------------------------------------------------------------
+# Iff MACRO-NAME does not yet contain VARNAME, then append it (delimited
+# by SEPARATOR if supplied) and expand UNIQ, else NOT-UNIQ.
+m4_define([lt_if_append_uniq],
+[m4_ifdef([$1],
+ [m4_if(m4_index([$3]m4_defn([$1])[$3], [$3$2$3]), [-1],
+ [lt_append([$1], [$2], [$3])$4],
+ [$5])],
+ [lt_append([$1], [$2], [$3])$4])])
+
+
+# lt_dict_add(DICT, KEY, VALUE)
+# -----------------------------
+m4_define([lt_dict_add],
+[m4_define([$1($2)], [$3])])
+
+
+# lt_dict_add_subkey(DICT, KEY, SUBKEY, VALUE)
+# --------------------------------------------
+m4_define([lt_dict_add_subkey],
+[m4_define([$1($2:$3)], [$4])])
+
+
+# lt_dict_fetch(DICT, KEY, [SUBKEY])
+# ----------------------------------
+m4_define([lt_dict_fetch],
+[m4_ifval([$3],
+ m4_ifdef([$1($2:$3)], [m4_defn([$1($2:$3)])]),
+ m4_ifdef([$1($2)], [m4_defn([$1($2)])]))])
+
+
+# lt_if_dict_fetch(DICT, KEY, [SUBKEY], VALUE, IF-TRUE, [IF-FALSE])
+# -----------------------------------------------------------------
+m4_define([lt_if_dict_fetch],
+[m4_if(lt_dict_fetch([$1], [$2], [$3]), [$4],
+ [$5],
+ [$6])])
+
+
+# lt_dict_filter(DICT, [SUBKEY], VALUE, [SEPARATOR], KEY, [...])
+# --------------------------------------------------------------
+m4_define([lt_dict_filter],
+[m4_if([$5], [], [],
+ [lt_join(m4_quote(m4_default([$4], [[, ]])),
+ lt_unquote(m4_split(m4_normalize(m4_foreach(_Lt_key, lt_car([m4_shiftn(4, $@)]),
+ [lt_if_dict_fetch([$1], _Lt_key, [$2], [$3], [_Lt_key ])])))))])[]dnl
+])
diff --git a/Build/source/utils/xz-4.999.9beta/m4/ltversion.m4 b/Build/source/utils/xz-4.999.9beta/m4/ltversion.m4
new file mode 100644
index 00000000000..b8e154fe6e1
--- /dev/null
+++ b/Build/source/utils/xz-4.999.9beta/m4/ltversion.m4
@@ -0,0 +1,23 @@
+# ltversion.m4 -- version numbers -*- Autoconf -*-
+#
+# Copyright (C) 2004 Free Software Foundation, Inc.
+# Written by Scott James Remnant, 2004
+#
+# This file is free software; the Free Software Foundation gives
+# unlimited permission to copy and/or distribute it, with or without
+# modifications, as long as this notice is preserved.
+
+# Generated from ltversion.in.
+
+# serial 3012 ltversion.m4
+# This file is part of GNU Libtool
+
+m4_define([LT_PACKAGE_VERSION], [2.2.6])
+m4_define([LT_PACKAGE_REVISION], [1.3012])
+
+AC_DEFUN([LTVERSION_VERSION],
+[macro_version='2.2.6'
+macro_revision='1.3012'
+_LT_DECL(, macro_version, 0, [Which release of libtool.m4 was used?])
+_LT_DECL(, macro_revision, 0)
+])
diff --git a/Build/source/utils/xz-4.999.9beta/m4/lt~obsolete.m4 b/Build/source/utils/xz-4.999.9beta/m4/lt~obsolete.m4
new file mode 100644
index 00000000000..637bb2066c4
--- /dev/null
+++ b/Build/source/utils/xz-4.999.9beta/m4/lt~obsolete.m4
@@ -0,0 +1,92 @@
+# lt~obsolete.m4 -- aclocal satisfying obsolete definitions. -*-Autoconf-*-
+#
+# Copyright (C) 2004, 2005, 2007 Free Software Foundation, Inc.
+# Written by Scott James Remnant, 2004.
+#
+# This file is free software; the Free Software Foundation gives
+# unlimited permission to copy and/or distribute it, with or without
+# modifications, as long as this notice is preserved.
+
+# serial 4 lt~obsolete.m4
+
+# These exist entirely to fool aclocal when bootstrapping libtool.
+#
+# In the past libtool.m4 has provided macros via AC_DEFUN (or AU_DEFUN)
+# which have later been changed to m4_define as they aren't part of the
+# exported API, or moved to Autoconf or Automake where they belong.
+#
+# The trouble is, aclocal is a bit thick. It'll see the old AC_DEFUN
+# in /usr/share/aclocal/libtool.m4 and remember it, then when it sees us
+# using a macro with the same name in our local m4/libtool.m4 it'll
+# pull the old libtool.m4 in (it doesn't see our shiny new m4_define
+# and doesn't know about Autoconf macros at all.)
+#
+# So we provide this file, which has a silly filename so it's always
+# included after everything else. This provides aclocal with the
+# AC_DEFUNs it wants, but when m4 processes it, it doesn't do anything
+# because those macros already exist, or will be overwritten later.
+# We use AC_DEFUN over AU_DEFUN for compatibility with aclocal-1.6.
+#
+# Anytime we withdraw an AC_DEFUN or AU_DEFUN, remember to add it here.
+# Yes, that means every name once taken will need to remain here until
+# we give up compatibility with versions before 1.7, at which point
+# we need to keep only those names which we still refer to.
+
+# This is to help aclocal find these macros, as it can't see m4_define.
+AC_DEFUN([LTOBSOLETE_VERSION], [m4_if([1])])
+
+m4_ifndef([AC_LIBTOOL_LINKER_OPTION], [AC_DEFUN([AC_LIBTOOL_LINKER_OPTION])])
+m4_ifndef([AC_PROG_EGREP], [AC_DEFUN([AC_PROG_EGREP])])
+m4_ifndef([_LT_AC_PROG_ECHO_BACKSLASH], [AC_DEFUN([_LT_AC_PROG_ECHO_BACKSLASH])])
+m4_ifndef([_LT_AC_SHELL_INIT], [AC_DEFUN([_LT_AC_SHELL_INIT])])
+m4_ifndef([_LT_AC_SYS_LIBPATH_AIX], [AC_DEFUN([_LT_AC_SYS_LIBPATH_AIX])])
+m4_ifndef([_LT_PROG_LTMAIN], [AC_DEFUN([_LT_PROG_LTMAIN])])
+m4_ifndef([_LT_AC_TAGVAR], [AC_DEFUN([_LT_AC_TAGVAR])])
+m4_ifndef([AC_LTDL_ENABLE_INSTALL], [AC_DEFUN([AC_LTDL_ENABLE_INSTALL])])
+m4_ifndef([AC_LTDL_PREOPEN], [AC_DEFUN([AC_LTDL_PREOPEN])])
+m4_ifndef([_LT_AC_SYS_COMPILER], [AC_DEFUN([_LT_AC_SYS_COMPILER])])
+m4_ifndef([_LT_AC_LOCK], [AC_DEFUN([_LT_AC_LOCK])])
+m4_ifndef([AC_LIBTOOL_SYS_OLD_ARCHIVE], [AC_DEFUN([AC_LIBTOOL_SYS_OLD_ARCHIVE])])
+m4_ifndef([_LT_AC_TRY_DLOPEN_SELF], [AC_DEFUN([_LT_AC_TRY_DLOPEN_SELF])])
+m4_ifndef([AC_LIBTOOL_PROG_CC_C_O], [AC_DEFUN([AC_LIBTOOL_PROG_CC_C_O])])
+m4_ifndef([AC_LIBTOOL_SYS_HARD_LINK_LOCKS], [AC_DEFUN([AC_LIBTOOL_SYS_HARD_LINK_LOCKS])])
+m4_ifndef([AC_LIBTOOL_OBJDIR], [AC_DEFUN([AC_LIBTOOL_OBJDIR])])
+m4_ifndef([AC_LTDL_OBJDIR], [AC_DEFUN([AC_LTDL_OBJDIR])])
+m4_ifndef([AC_LIBTOOL_PROG_LD_HARDCODE_LIBPATH], [AC_DEFUN([AC_LIBTOOL_PROG_LD_HARDCODE_LIBPATH])])
+m4_ifndef([AC_LIBTOOL_SYS_LIB_STRIP], [AC_DEFUN([AC_LIBTOOL_SYS_LIB_STRIP])])
+m4_ifndef([AC_PATH_MAGIC], [AC_DEFUN([AC_PATH_MAGIC])])
+m4_ifndef([AC_PROG_LD_GNU], [AC_DEFUN([AC_PROG_LD_GNU])])
+m4_ifndef([AC_PROG_LD_RELOAD_FLAG], [AC_DEFUN([AC_PROG_LD_RELOAD_FLAG])])
+m4_ifndef([AC_DEPLIBS_CHECK_METHOD], [AC_DEFUN([AC_DEPLIBS_CHECK_METHOD])])
+m4_ifndef([AC_LIBTOOL_PROG_COMPILER_NO_RTTI], [AC_DEFUN([AC_LIBTOOL_PROG_COMPILER_NO_RTTI])])
+m4_ifndef([AC_LIBTOOL_SYS_GLOBAL_SYMBOL_PIPE], [AC_DEFUN([AC_LIBTOOL_SYS_GLOBAL_SYMBOL_PIPE])])
+m4_ifndef([AC_LIBTOOL_PROG_COMPILER_PIC], [AC_DEFUN([AC_LIBTOOL_PROG_COMPILER_PIC])])
+m4_ifndef([AC_LIBTOOL_PROG_LD_SHLIBS], [AC_DEFUN([AC_LIBTOOL_PROG_LD_SHLIBS])])
+m4_ifndef([AC_LIBTOOL_POSTDEP_PREDEP], [AC_DEFUN([AC_LIBTOOL_POSTDEP_PREDEP])])
+m4_ifndef([LT_AC_PROG_EGREP], [AC_DEFUN([LT_AC_PROG_EGREP])])
+m4_ifndef([LT_AC_PROG_SED], [AC_DEFUN([LT_AC_PROG_SED])])
+m4_ifndef([_LT_CC_BASENAME], [AC_DEFUN([_LT_CC_BASENAME])])
+m4_ifndef([_LT_COMPILER_BOILERPLATE], [AC_DEFUN([_LT_COMPILER_BOILERPLATE])])
+m4_ifndef([_LT_LINKER_BOILERPLATE], [AC_DEFUN([_LT_LINKER_BOILERPLATE])])
+m4_ifndef([_AC_PROG_LIBTOOL], [AC_DEFUN([_AC_PROG_LIBTOOL])])
+m4_ifndef([AC_LIBTOOL_SETUP], [AC_DEFUN([AC_LIBTOOL_SETUP])])
+m4_ifndef([_LT_AC_CHECK_DLFCN], [AC_DEFUN([_LT_AC_CHECK_DLFCN])])
+m4_ifndef([AC_LIBTOOL_SYS_DYNAMIC_LINKER], [AC_DEFUN([AC_LIBTOOL_SYS_DYNAMIC_LINKER])])
+m4_ifndef([_LT_AC_TAGCONFIG], [AC_DEFUN([_LT_AC_TAGCONFIG])])
+m4_ifndef([AC_DISABLE_FAST_INSTALL], [AC_DEFUN([AC_DISABLE_FAST_INSTALL])])
+m4_ifndef([_LT_AC_LANG_CXX], [AC_DEFUN([_LT_AC_LANG_CXX])])
+m4_ifndef([_LT_AC_LANG_F77], [AC_DEFUN([_LT_AC_LANG_F77])])
+m4_ifndef([_LT_AC_LANG_GCJ], [AC_DEFUN([_LT_AC_LANG_GCJ])])
+m4_ifndef([AC_LIBTOOL_RC], [AC_DEFUN([AC_LIBTOOL_RC])])
+m4_ifndef([AC_LIBTOOL_LANG_C_CONFIG], [AC_DEFUN([AC_LIBTOOL_LANG_C_CONFIG])])
+m4_ifndef([_LT_AC_LANG_C_CONFIG], [AC_DEFUN([_LT_AC_LANG_C_CONFIG])])
+m4_ifndef([AC_LIBTOOL_LANG_CXX_CONFIG], [AC_DEFUN([AC_LIBTOOL_LANG_CXX_CONFIG])])
+m4_ifndef([_LT_AC_LANG_CXX_CONFIG], [AC_DEFUN([_LT_AC_LANG_CXX_CONFIG])])
+m4_ifndef([AC_LIBTOOL_LANG_F77_CONFIG], [AC_DEFUN([AC_LIBTOOL_LANG_F77_CONFIG])])
+m4_ifndef([_LT_AC_LANG_F77_CONFIG], [AC_DEFUN([_LT_AC_LANG_F77_CONFIG])])
+m4_ifndef([AC_LIBTOOL_LANG_GCJ_CONFIG], [AC_DEFUN([AC_LIBTOOL_LANG_GCJ_CONFIG])])
+m4_ifndef([_LT_AC_LANG_GCJ_CONFIG], [AC_DEFUN([_LT_AC_LANG_GCJ_CONFIG])])
+m4_ifndef([AC_LIBTOOL_LANG_RC_CONFIG], [AC_DEFUN([AC_LIBTOOL_LANG_RC_CONFIG])])
+m4_ifndef([_LT_AC_LANG_RC_CONFIG], [AC_DEFUN([_LT_AC_LANG_RC_CONFIG])])
+m4_ifndef([AC_LIBTOOL_CONFIG], [AC_DEFUN([AC_LIBTOOL_CONFIG])])
+m4_ifndef([_LT_AC_FILE_LTDLL_C], [AC_DEFUN([_LT_AC_FILE_LTDLL_C])])
diff --git a/Build/source/utils/xz-4.999.8beta/m4/nls.m4 b/Build/source/utils/xz-4.999.9beta/m4/nls.m4
index 7967cc2f9ac..7967cc2f9ac 100644
--- a/Build/source/utils/xz-4.999.8beta/m4/nls.m4
+++ b/Build/source/utils/xz-4.999.9beta/m4/nls.m4
diff --git a/Build/source/utils/xz-4.999.8beta/m4/po.m4 b/Build/source/utils/xz-4.999.9beta/m4/po.m4
index 00133ef36f8..00133ef36f8 100644
--- a/Build/source/utils/xz-4.999.8beta/m4/po.m4
+++ b/Build/source/utils/xz-4.999.9beta/m4/po.m4
diff --git a/Build/source/utils/xz-4.999.9beta/m4/posix-shell.m4 b/Build/source/utils/xz-4.999.9beta/m4/posix-shell.m4
new file mode 100644
index 00000000000..4c56193c157
--- /dev/null
+++ b/Build/source/utils/xz-4.999.9beta/m4/posix-shell.m4
@@ -0,0 +1,63 @@
+# Find a POSIX-conforming shell.
+
+# Copyright (C) 2007-2008 Free Software Foundation, Inc.
+
+# This file is free software; the Free Software Foundation
+# gives unlimited permission to copy and/or distribute it,
+# with or without modifications, as long as this notice is preserved.
+
+# Written by Paul Eggert.
+
+# If a POSIX-conforming shell can be found, set POSIX_SHELL and
+# PREFERABLY_POSIX_SHELL to it. If not, set POSIX_SHELL to the
+# empty string and PREFERABLY_POSIX_SHELL to '/bin/sh'.
+
+AC_DEFUN([gl_POSIX_SHELL],
+[
+ AC_CACHE_CHECK([for a shell that conforms to POSIX], [gl_cv_posix_shell],
+ [gl_test_posix_shell_script='
+ func_return () {
+ (exit [$]1)
+ }
+ func_success () {
+ func_return 0
+ }
+ func_failure () {
+ func_return 1
+ }
+ func_ret_success () {
+ return 0
+ }
+ func_ret_failure () {
+ return 1
+ }
+ subshell_umask_sanity () {
+ (umask 22; (umask 0); test $(umask) -eq 22)
+ }
+ test "[$](echo foo)" = foo &&
+ func_success &&
+ ! func_failure &&
+ func_ret_success &&
+ ! func_ret_failure &&
+ (set x && func_ret_success y && test x = "[$]1") &&
+ subshell_umask_sanity
+ '
+ for gl_cv_posix_shell in \
+ "$CONFIG_SHELL" "$SHELL" /bin/sh /bin/bash /bin/ksh /bin/sh5 no; do
+ case $gl_cv_posix_shell in
+ /*)
+ "$gl_cv_posix_shell" -c "$gl_test_posix_shell_script" 2>/dev/null \
+ && break;;
+ esac
+ done])
+
+ if test "$gl_cv_posix_shell" != no; then
+ POSIX_SHELL=$gl_cv_posix_shell
+ PREFERABLY_POSIX_SHELL=$POSIX_SHELL
+ else
+ POSIX_SHELL=
+ PREFERABLY_POSIX_SHELL=/bin/sh
+ fi
+ AC_SUBST([POSIX_SHELL])
+ AC_SUBST([PREFERABLY_POSIX_SHELL])
+])
diff --git a/Build/source/utils/xz-4.999.8beta/m4/progtest.m4 b/Build/source/utils/xz-4.999.9beta/m4/progtest.m4
index a56365cd37f..a56365cd37f 100644
--- a/Build/source/utils/xz-4.999.8beta/m4/progtest.m4
+++ b/Build/source/utils/xz-4.999.9beta/m4/progtest.m4
diff --git a/Build/source/utils/xz-4.999.9beta/m4/visibility.m4 b/Build/source/utils/xz-4.999.9beta/m4/visibility.m4
new file mode 100644
index 00000000000..2ff6330aa42
--- /dev/null
+++ b/Build/source/utils/xz-4.999.9beta/m4/visibility.m4
@@ -0,0 +1,52 @@
+# visibility.m4 serial 1 (gettext-0.15)
+dnl Copyright (C) 2005 Free Software Foundation, Inc.
+dnl This file is free software; the Free Software Foundation
+dnl gives unlimited permission to copy and/or distribute it,
+dnl with or without modifications, as long as this notice is preserved.
+
+dnl From Bruno Haible.
+
+dnl Tests whether the compiler supports the command-line option
+dnl -fvisibility=hidden and the function and variable attributes
+dnl __attribute__((__visibility__("hidden"))) and
+dnl __attribute__((__visibility__("default"))).
+dnl Does *not* test for __visibility__("protected") - which has tricky
+dnl semantics (see the 'vismain' test in glibc) and does not exist e.g. on
+dnl MacOS X.
+dnl Does *not* test for __visibility__("internal") - which has processor
+dnl dependent semantics.
+dnl Does *not* test for #pragma GCC visibility push(hidden) - which is
+dnl "really only recommended for legacy code".
+dnl Set the variable CFLAG_VISIBILITY.
+dnl Defines and sets the variable HAVE_VISIBILITY.
+
+AC_DEFUN([gl_VISIBILITY],
+[
+ AC_REQUIRE([AC_PROG_CC])
+ CFLAG_VISIBILITY=
+ HAVE_VISIBILITY=0
+ if test -n "$GCC"; then
+ AC_MSG_CHECKING([for simple visibility declarations])
+ AC_CACHE_VAL(gl_cv_cc_visibility, [
+ gl_save_CFLAGS="$CFLAGS"
+ CFLAGS="$CFLAGS -fvisibility=hidden"
+ AC_TRY_COMPILE(
+ [extern __attribute__((__visibility__("hidden"))) int hiddenvar;
+ extern __attribute__((__visibility__("default"))) int exportedvar;
+ extern __attribute__((__visibility__("hidden"))) int hiddenfunc (void);
+ extern __attribute__((__visibility__("default"))) int exportedfunc (void);],
+ [],
+ gl_cv_cc_visibility=yes,
+ gl_cv_cc_visibility=no)
+ CFLAGS="$gl_save_CFLAGS"])
+ AC_MSG_RESULT([$gl_cv_cc_visibility])
+ if test $gl_cv_cc_visibility = yes; then
+ CFLAG_VISIBILITY="-fvisibility=hidden"
+ HAVE_VISIBILITY=1
+ fi
+ fi
+ AC_SUBST([CFLAG_VISIBILITY])
+ AC_SUBST([HAVE_VISIBILITY])
+ AC_DEFINE_UNQUOTED([HAVE_VISIBILITY], [$HAVE_VISIBILITY],
+ [Define to 1 or 0, depending whether the compiler supports simple visibility declarations.])
+])
diff --git a/Build/source/utils/xz-4.999.8beta/po/LINGUAS b/Build/source/utils/xz-4.999.9beta/po/LINGUAS
index e69de29bb2d..e69de29bb2d 100644
--- a/Build/source/utils/xz-4.999.8beta/po/LINGUAS
+++ b/Build/source/utils/xz-4.999.9beta/po/LINGUAS
diff --git a/Build/source/utils/xz-4.999.8beta/po/Makefile.in.in b/Build/source/utils/xz-4.999.9beta/po/Makefile.in.in
index 5022b8b187f..5022b8b187f 100644
--- a/Build/source/utils/xz-4.999.8beta/po/Makefile.in.in
+++ b/Build/source/utils/xz-4.999.9beta/po/Makefile.in.in
diff --git a/Build/source/utils/xz-4.999.8beta/po/Makevars b/Build/source/utils/xz-4.999.9beta/po/Makevars
index dc19bc96313..dc19bc96313 100644
--- a/Build/source/utils/xz-4.999.8beta/po/Makevars
+++ b/Build/source/utils/xz-4.999.9beta/po/Makevars
diff --git a/Build/source/utils/xz-4.999.8beta/po/POTFILES.in b/Build/source/utils/xz-4.999.9beta/po/POTFILES.in
index 4d1299a3344..ee430c5c3ab 100644
--- a/Build/source/utils/xz-4.999.8beta/po/POTFILES.in
+++ b/Build/source/utils/xz-4.999.9beta/po/POTFILES.in
@@ -1,10 +1,10 @@
# List of source files which contain translatable strings.
src/xz/args.c
+src/xz/coder.c
+src/xz/file_io.c
src/xz/hardware.c
-src/xz/io.c
src/xz/main.c
src/xz/message.c
src/xz/options.c
-src/xz/process.c
src/xz/suffix.c
src/xz/util.c
diff --git a/Build/source/utils/xz-4.999.8beta/po/Rules-quot b/Build/source/utils/xz-4.999.9beta/po/Rules-quot
index 9c2a995e300..9c2a995e300 100644
--- a/Build/source/utils/xz-4.999.8beta/po/Rules-quot
+++ b/Build/source/utils/xz-4.999.9beta/po/Rules-quot
diff --git a/Build/source/utils/xz-4.999.8beta/po/boldquot.sed b/Build/source/utils/xz-4.999.9beta/po/boldquot.sed
index 4b937aa517b..4b937aa517b 100644
--- a/Build/source/utils/xz-4.999.8beta/po/boldquot.sed
+++ b/Build/source/utils/xz-4.999.9beta/po/boldquot.sed
diff --git a/Build/source/utils/xz-4.999.8beta/po/en@boldquot.header b/Build/source/utils/xz-4.999.9beta/po/en@boldquot.header
index fedb6a06d12..fedb6a06d12 100644
--- a/Build/source/utils/xz-4.999.8beta/po/en@boldquot.header
+++ b/Build/source/utils/xz-4.999.9beta/po/en@boldquot.header
diff --git a/Build/source/utils/xz-4.999.8beta/po/en@quot.header b/Build/source/utils/xz-4.999.9beta/po/en@quot.header
index a9647fc35c3..a9647fc35c3 100644
--- a/Build/source/utils/xz-4.999.8beta/po/en@quot.header
+++ b/Build/source/utils/xz-4.999.9beta/po/en@quot.header
diff --git a/Build/source/utils/xz-4.999.8beta/po/insert-header.sin b/Build/source/utils/xz-4.999.9beta/po/insert-header.sin
index b26de01f6c8..b26de01f6c8 100644
--- a/Build/source/utils/xz-4.999.8beta/po/insert-header.sin
+++ b/Build/source/utils/xz-4.999.9beta/po/insert-header.sin
diff --git a/Build/source/utils/xz-4.999.8beta/po/quot.sed b/Build/source/utils/xz-4.999.9beta/po/quot.sed
index 0122c46318d..0122c46318d 100644
--- a/Build/source/utils/xz-4.999.8beta/po/quot.sed
+++ b/Build/source/utils/xz-4.999.9beta/po/quot.sed
diff --git a/Build/source/utils/xz-4.999.8beta/po/remove-potcdate.sin b/Build/source/utils/xz-4.999.9beta/po/remove-potcdate.sin
index 2436c49e786..2436c49e786 100644
--- a/Build/source/utils/xz-4.999.8beta/po/remove-potcdate.sin
+++ b/Build/source/utils/xz-4.999.9beta/po/remove-potcdate.sin
diff --git a/Build/source/utils/xz-4.999.8beta/po/stamp-po b/Build/source/utils/xz-4.999.9beta/po/stamp-po
index 9788f70238c..9788f70238c 100644
--- a/Build/source/utils/xz-4.999.8beta/po/stamp-po
+++ b/Build/source/utils/xz-4.999.9beta/po/stamp-po
diff --git a/Build/source/utils/xz-4.999.8beta/po/xz.pot b/Build/source/utils/xz-4.999.9beta/po/xz.pot
index 3dcb2ba0308..dc6e320178d 100644
--- a/Build/source/utils/xz-4.999.8beta/po/xz.pot
+++ b/Build/source/utils/xz-4.999.9beta/po/xz.pot
@@ -7,7 +7,7 @@ msgid ""
msgstr ""
"Project-Id-Version: PACKAGE VERSION\n"
"Report-Msgid-Bugs-To: lasse.collin@tukaani.org\n"
-"POT-Creation-Date: 2009-02-05 21:19+0200\n"
+"POT-Creation-Date: 2009-08-27 18:37+0300\n"
"PO-Revision-Date: YEAR-MO-DA HO:MI+ZONE\n"
"Last-Translator: FULL NAME <EMAIL@ADDRESS>\n"
"Language-Team: LANGUAGE <LL@li.org>\n"
@@ -15,169 +15,203 @@ msgstr ""
"Content-Type: text/plain; charset=CHARSET\n"
"Content-Transfer-Encoding: 8bit\n"
-#: src/xz/args.c:274
+#: src/xz/args.c:289
#, c-format
msgid "%s: Unknown file format type"
msgstr ""
-#: src/xz/args.c:297
+#: src/xz/args.c:312 src/xz/args.c:320
#, c-format
-msgid "%s: Unknown integritycheck type"
+msgid "%s: Unsupported integrity check type"
msgstr ""
-#: src/xz/args.c:312
+#: src/xz/args.c:334
msgid "Only one file can be specified with `--files'or `--files0'."
msgstr ""
-#: src/xz/args.c:363
+#: src/xz/args.c:392
msgid "The environment variable XZ_OPT contains too many arguments"
msgstr ""
-#: src/xz/io.c:79
+#: src/xz/coder.c:95
+msgid "Maximum number of filters is four"
+msgstr ""
+
+#: src/xz/coder.c:108
+#, c-format
+msgid "Memory usage limit (%<PRIu64> MiB) is too small for the given filter setup (%<PRIu64> MiB)"
+msgstr ""
+
+#: src/xz/coder.c:128
+msgid "Using a preset in raw mode is discouraged."
+msgstr ""
+
+#: src/xz/coder.c:130
+msgid "The exact options of the presets may vary between software versions."
+msgstr ""
+
+#: src/xz/coder.c:158
+msgid "The .lzma format supports only the LZMA1 filter"
+msgstr ""
+
+#: src/xz/coder.c:166
+msgid "LZMA1 cannot be used with the .xz format"
+msgstr ""
+
+#: src/xz/coder.c:186
+#, c-format
+msgid "%s MiB (%s B) of memory is required per thread, limit is %s MiB (%s B)"
+msgstr ""
+
+#: src/xz/coder.c:553
+#, c-format
+msgid "Limit was %s MiB, but %s MiB would have been needed"
+msgstr ""
+
+#: src/xz/file_io.c:86
#, c-format
msgid "%s: File seems to be moved, not removing"
msgstr ""
-#: src/xz/io.c:86
+#: src/xz/file_io.c:93
#, c-format
msgid "%s: Cannot remove: %s"
msgstr ""
-#: src/xz/io.c:111
+#: src/xz/file_io.c:118
#, c-format
msgid "%s: Cannot set the file owner: %s"
msgstr ""
-#: src/xz/io.c:117
+#: src/xz/file_io.c:124
#, c-format
msgid "%s: Cannot set the file group: %s"
msgstr ""
-#: src/xz/io.c:136
+#: src/xz/file_io.c:143
#, c-format
msgid "%s: Cannot set the file permissions: %s"
msgstr ""
-#: src/xz/io.c:274 src/xz/io.c:353
+#: src/xz/file_io.c:281 src/xz/file_io.c:360
#, c-format
msgid "%s: Is a symbolic link, skipping"
msgstr ""
-#: src/xz/io.c:388
+#: src/xz/file_io.c:395
#, c-format
msgid "%s: Is a directory, skipping"
msgstr ""
-#: src/xz/io.c:395
+#: src/xz/file_io.c:402
#, c-format
msgid "%s: Not a regular file, skipping"
msgstr ""
-#: src/xz/io.c:412
+#: src/xz/file_io.c:419
#, c-format
msgid "%s: File has setuid or setgid bit set, skipping"
msgstr ""
-#: src/xz/io.c:419
+#: src/xz/file_io.c:426
#, c-format
msgid "%s: File has sticky bit set, skipping"
msgstr ""
-#: src/xz/io.c:426
+#: src/xz/file_io.c:433
#, c-format
msgid "%s: Input file has more than one hard link, skipping"
msgstr ""
-#: src/xz/io.c:548
+#: src/xz/file_io.c:555
#, c-format
msgid "%s: Closing the file failed: %s"
msgstr ""
-#: src/xz/io.c:656
+#: src/xz/file_io.c:663
#, c-format
msgid "%s: Read error: %s"
msgstr ""
-#: src/xz/io.c:701
+#: src/xz/file_io.c:708
#, c-format
msgid "%s: Write error: %s"
msgstr ""
-#: src/xz/main.c:52
-#, c-format
-msgid "Writing to standard output failed: %s"
+#: src/xz/main.c:57
+msgid "Writing to standard output failed"
msgstr ""
-#: src/xz/main.c:55
+#: src/xz/main.c:60
msgid "Unknown error"
msgstr ""
-#: src/xz/main.c:107
+#: src/xz/main.c:117
#, c-format
msgid "%s: Error reading filenames: %s"
msgstr ""
-#: src/xz/main.c:114
+#: src/xz/main.c:124
#, c-format
msgid "%s: Unexpected end of input when reading filenames"
msgstr ""
-#: src/xz/main.c:138
+#: src/xz/main.c:148
#, c-format
msgid "%s: Null character found when reading filenames; maybe you meant to use `--files0' instead of `--files'?"
msgstr ""
-#: src/xz/main.c:239
+#: src/xz/main.c:272
msgid "Cannot read data from standard input when reading filenames from standard input"
msgstr ""
-#: src/xz/message.c:714 src/xz/message.c:758
+#: src/xz/message.c:840 src/xz/message.c:884
msgid "Internal error (bug)"
msgstr ""
-#: src/xz/message.c:721
+#: src/xz/message.c:847
msgid "Cannot establish signal handlers"
msgstr ""
-#: src/xz/message.c:730
+#: src/xz/message.c:856
msgid "No integrity check; not verifying file integrity"
msgstr ""
-#: src/xz/message.c:733
+#: src/xz/message.c:859
msgid "Unsupported type of integrity check; not verifying file integrity"
msgstr ""
-#: src/xz/message.c:740
+#: src/xz/message.c:866
msgid "Memory usage limit reached"
msgstr ""
-#: src/xz/message.c:743
+#: src/xz/message.c:869
msgid "File format not recognized"
msgstr ""
-#: src/xz/message.c:746
+#: src/xz/message.c:872
msgid "Unsupported options"
msgstr ""
-#: src/xz/message.c:749
+#: src/xz/message.c:875
msgid "Compressed data is corrupt"
msgstr ""
-#: src/xz/message.c:752
+#: src/xz/message.c:878
msgid "Unexpected end of input"
msgstr ""
-#: src/xz/message.c:771
+#: src/xz/message.c:897
#, c-format
msgid "%s: Filter chain:"
msgstr ""
-#: src/xz/message.c:882
+#: src/xz/message.c:1008
#, c-format
msgid "Try `%s --help' for more information."
msgstr ""
-#: src/xz/message.c:901
+#: src/xz/message.c:1027
#, c-format
msgid ""
"Usage: %s [OPTION]... [FILE]...\n"
@@ -185,15 +219,15 @@ msgid ""
"\n"
msgstr ""
-#: src/xz/message.c:905
+#: src/xz/message.c:1031
msgid "Mandatory arguments to long options are mandatory for short options too.\n"
msgstr ""
-#: src/xz/message.c:909
+#: src/xz/message.c:1035
msgid " Operation mode:\n"
msgstr ""
-#: src/xz/message.c:912
+#: src/xz/message.c:1038
msgid ""
" -z, --compress force compression\n"
" -d, --decompress force decompression\n"
@@ -201,20 +235,20 @@ msgid ""
" -l, --list list information about files"
msgstr ""
-#: src/xz/message.c:918
+#: src/xz/message.c:1044
msgid ""
"\n"
" Operation modifiers:\n"
msgstr ""
-#: src/xz/message.c:921
+#: src/xz/message.c:1047
msgid ""
" -k, --keep keep (don't delete) input files\n"
" -f, --force force overwrite of output file and (de)compress links\n"
" -c, --stdout write to standard output and don't delete input files"
msgstr ""
-#: src/xz/message.c:927
+#: src/xz/message.c:1053
msgid ""
" -S, --suffix=.SUF use the suffix `.SUF' on compressed files\n"
" --files=[FILE] read filenames to process from FILE; if FILE is\n"
@@ -223,13 +257,13 @@ msgid ""
" --files0=[FILE] like --files but use the null character as terminator"
msgstr ""
-#: src/xz/message.c:934
+#: src/xz/message.c:1060
msgid ""
"\n"
" Basic file format and compression options:\n"
msgstr ""
-#: src/xz/message.c:936
+#: src/xz/message.c:1062
msgid ""
" -F, --format=FMT file format to encode or decode; possible values are\n"
" `auto' (default), `xz', `lzma', and `raw'\n"
@@ -237,31 +271,37 @@ msgid ""
" or `sha256'"
msgstr ""
-#: src/xz/message.c:943
+#: src/xz/message.c:1069
msgid ""
" -0 .. -9 compression preset; 0-2 fast compression, 3-5 good\n"
" compression, 6-9 excellent compression; default is 6"
msgstr ""
-#: src/xz/message.c:947
+#: src/xz/message.c:1073
+msgid ""
+" -e, --extreme use more CPU time when encoding to increase compression\n"
+" ratio without increasing memory usage of the decoder"
+msgstr ""
+
+#: src/xz/message.c:1078
msgid ""
" -M, --memory=NUM use roughly NUM bytes of memory at maximum; 0 indicates\n"
" the default setting, which depends on the operation mode\n"
" and the amount of physical memory (RAM)"
msgstr ""
-#: src/xz/message.c:953
+#: src/xz/message.c:1084
msgid ""
"\n"
" Custom filter chain for compression (alternative for using presets):"
msgstr ""
-#: src/xz/message.c:958
+#: src/xz/message.c:1089
msgid ""
"\n"
-" --lzma1=[OPTS] LZMA1 or LZMA2; OPTS is a comma-separated list of zero or\n"
-" --lzma2=[OPTS] more of the following options (valid values; default):\n"
-" preset=NUM reset options to preset number NUM (1-9)\n"
+" --lzma1[=OPTS] LZMA1 or LZMA2; OPTS is a comma-separated list of zero or\n"
+" --lzma2[=OPTS] more of the following options (valid values; default):\n"
+" preset=NUM reset options to preset number NUM (0-9)\n"
" dict=NUM dictionary size (4KiB - 1536MiB; 8MiB)\n"
" lc=NUM number of literal context bits (0-4; 3)\n"
" lp=NUM number of literal position bits (0-4; 0)\n"
@@ -272,89 +312,99 @@ msgid ""
" depth=NUM maximum search depth; 0=automatic (default)"
msgstr ""
-#: src/xz/message.c:973
+#: src/xz/message.c:1104
msgid ""
"\n"
-" --x86 x86 filter (sometimes called BCJ filter)\n"
-" --powerpc PowerPC (big endian) filter\n"
-" --ia64 IA64 (Itanium) filter\n"
-" --arm ARM filter\n"
-" --armthumb ARM-Thumb filter\n"
-" --sparc SPARC filter"
+" --x86[=OPTS] x86 BCJ filter\n"
+" --powerpc[=OPTS] PowerPC BCJ filter (big endian only)\n"
+" --ia64[=OPTS] IA64 (Itanium) BCJ filter\n"
+" --arm[=OPTS] ARM BCJ filter (little endian only)\n"
+" --armthumb[=OPTS] ARM-Thumb BCJ filter (little endian only)\n"
+" --sparc[=OPTS] SPARC BCJ filter\n"
+" Valid OPTS for all BCJ filters:\n"
+" start=NUM start offset for conversions (default=0)"
msgstr ""
-#: src/xz/message.c:983
+#: src/xz/message.c:1116
msgid ""
"\n"
-" --delta=[OPTS] Delta filter; valid OPTS (valid values; default):\n"
+" --delta[=OPTS] Delta filter; valid OPTS (valid values; default):\n"
" dist=NUM distance between bytes being subtracted\n"
" from each other (1-256; 1)"
msgstr ""
-#: src/xz/message.c:991
+#: src/xz/message.c:1124
msgid ""
"\n"
-" --subblock=[OPTS] Subblock filter; valid OPTS (valid values; default):\n"
+" --subblock[=OPTS] Subblock filter; valid OPTS (valid values; default):\n"
" size=NUM number of bytes of data per subblock\n"
" (1 - 256Mi; 4Ki)\n"
" rle=NUM run-length encoder chunk size (0-256; 0)"
msgstr ""
-#: src/xz/message.c:1000
+#: src/xz/message.c:1133
msgid ""
"\n"
" Other options:\n"
msgstr ""
-#: src/xz/message.c:1003
+#: src/xz/message.c:1136
msgid ""
" -q, --quiet suppress warnings; specify twice to suppress errors too\n"
" -v, --verbose be verbose; specify twice for even more verbose"
msgstr ""
-#: src/xz/message.c:1008
+#: src/xz/message.c:1141
+msgid " -Q, --no-warn make warnings not affect the exit status"
+msgstr ""
+
+#: src/xz/message.c:1145
msgid ""
"\n"
" -h, --help display the short help (lists only the basic options)\n"
" -H, --long-help display this long help"
msgstr ""
-#: src/xz/message.c:1013
+#: src/xz/message.c:1150
msgid ""
" -h, --help display this short help\n"
" -H, --long-help display the long help (lists also the advanced options)"
msgstr ""
-#: src/xz/message.c:1017
+#: src/xz/message.c:1154
msgid " -V, --version display the version number"
msgstr ""
-#: src/xz/message.c:1019
+#: src/xz/message.c:1156
msgid ""
"\n"
"With no FILE, or when FILE is -, read standard input.\n"
msgstr ""
-#: src/xz/message.c:1023
+#: src/xz/message.c:1160
#, c-format
msgid ""
-"On this system and configuration, the tool will use at maximum of\n"
-" * roughly %'<PRIu64> MiB RAM for compression;\n"
-" * roughly %'<PRIu64> MiB RAM for decompression; and\n"
+"On this system and configuration, this program will use at maximum of roughly\n"
+"%s MiB RAM and "
msgstr ""
-#: src/xz/message.c:1028
+#: src/xz/message.c:1162
msgid ""
-" * one thread for (de)compression.\n"
+"one thread.\n"
"\n"
msgstr ""
-#: src/xz/message.c:1033
+#: src/xz/message.c:1167
#, c-format
msgid "Report bugs to <%s> (in English or Finnish).\n"
msgstr ""
-#: src/xz/options.c:83
+#: src/xz/message.c:1169
+#, c-format
+msgid "%s home page: <%s>\n"
+msgstr ""
+
+#: src/xz/options.c:88
#, c-format
msgid "%s: Options must be `name=value' pairs separated with commas"
msgstr ""
@@ -364,94 +414,68 @@ msgstr ""
msgid "%s: Invalid option value"
msgstr ""
-#: src/xz/options.c:119
+#: src/xz/options.c:131
#, c-format
msgid "%s: Invalid option name"
msgstr ""
-#: src/xz/options.c:351
-msgid "The sum of lc and lp must be at maximum of 4"
-msgstr ""
-
-#: src/xz/options.c:356
-#, c-format
-msgid "The selected match finder requires at least nice=%<PRIu32>"
-msgstr ""
-
-#: src/xz/process.c:86
-msgid "Maximum number of filters is four"
-msgstr ""
-
-#: src/xz/process.c:99
+#: src/xz/options.c:310
#, c-format
-msgid "Memory usage limit (%<PRIu64> MiB) is too small for the given filter setup (%<PRIu64> MiB)"
-msgstr ""
-
-#: src/xz/process.c:119
-msgid "Using a preset in raw mode is discouraged."
-msgstr ""
-
-#: src/xz/process.c:121
-msgid "The exact options of the presets may vary between software versions."
-msgstr ""
-
-#: src/xz/process.c:149
-msgid "With --format=lzma only the LZMA1 filter is supported"
+msgid "Unsupported LZMA1/LZMA2 preset: %s"
msgstr ""
-#: src/xz/process.c:172
-#, c-format
-msgid "%'<PRIu64> MiB (%'<PRIu64> B) of memory is required per thread, limit is %'<PRIu64> MiB (%'<PRIu64> B)"
+#: src/xz/options.c:429
+msgid "The sum of lc and lp must be at maximum of 4"
msgstr ""
-#: src/xz/process.c:451
+#: src/xz/options.c:434
#, c-format
-msgid "Limit was %'<PRIu64> MiB, but %'<PRIu64> MiB would have been needed"
+msgid "The selected match finder requires at least nice=%<PRIu32>"
msgstr ""
-#: src/xz/suffix.c:81 src/xz/suffix.c:166
+#: src/xz/suffix.c:79 src/xz/suffix.c:164
#, c-format
msgid "%s: With --format=raw, --suffix=.SUF is required unless writing to stdout"
msgstr ""
-#: src/xz/suffix.c:101
+#: src/xz/suffix.c:99
#, c-format
msgid "%s: Filename has an unknown suffix, skipping"
msgstr ""
-#: src/xz/suffix.c:156
+#: src/xz/suffix.c:154
#, c-format
msgid "%s: File already has `%s' suffix, skipping"
msgstr ""
-#: src/xz/suffix.c:207
+#: src/xz/suffix.c:205
#, c-format
msgid "%s: Invalid filename suffix"
msgstr ""
-#: src/xz/util.c:56
+#: src/xz/util.c:62
#, c-format
msgid "%s: Value is not a non-negative decimal integer"
msgstr ""
-#: src/xz/util.c:98
+#: src/xz/util.c:104
#, c-format
msgid "%s: Invalid multiplier suffix. Valid suffixes:"
msgstr ""
-#: src/xz/util.c:118
+#: src/xz/util.c:124
#, c-format
msgid "Value of the option `%s' must be in the range [%<PRIu64>, %<PRIu64>]"
msgstr ""
-#: src/xz/util.c:167
+#: src/xz/util.c:198
msgid "Empty filename, skipping"
msgstr ""
-#: src/xz/util.c:181
+#: src/xz/util.c:212
msgid "Compressed data not read from a terminal unless `--force' is used."
msgstr ""
-#: src/xz/util.c:194
+#: src/xz/util.c:225
msgid "Compressed data not written to a terminal unless `--force' is used."
msgstr ""
diff --git a/Build/source/utils/xz-4.999.9beta/src/Makefile.am b/Build/source/utils/xz-4.999.9beta/src/Makefile.am
new file mode 100644
index 00000000000..f03f5a3da30
--- /dev/null
+++ b/Build/source/utils/xz-4.999.9beta/src/Makefile.am
@@ -0,0 +1,9 @@
+##
+## Author: Lasse Collin
+##
+## This file has been put into the public domain.
+## You can do whatever you want with this file.
+##
+
+SUBDIRS = liblzma xz xzdec lzmainfo scripts
+EXTRA_DIST = common
diff --git a/Build/source/utils/xz-4.999.8beta/src/Makefile.in b/Build/source/utils/xz-4.999.9beta/src/Makefile.in
index 0e3af9ef4c6..6d7c827ed7b 100644
--- a/Build/source/utils/xz-4.999.8beta/src/Makefile.in
+++ b/Build/source/utils/xz-4.999.9beta/src/Makefile.in
@@ -1,8 +1,9 @@
-# Makefile.in generated by automake 1.10.2 from Makefile.am.
+# Makefile.in generated by automake 1.11 from Makefile.am.
# @configure_input@
# Copyright (C) 1994, 1995, 1996, 1997, 1998, 1999, 2000, 2001, 2002,
-# 2003, 2004, 2005, 2006, 2007, 2008 Free Software Foundation, Inc.
+# 2003, 2004, 2005, 2006, 2007, 2008, 2009 Free Software Foundation,
+# Inc.
# This Makefile.in is free software; the Free Software Foundation
# gives unlimited permission to copy and/or distribute it,
# with or without modifications, as long as this notice is preserved.
@@ -15,8 +16,9 @@
@SET_MAKE@
VPATH = @srcdir@
pkgdatadir = $(datadir)/@PACKAGE@
-pkglibdir = $(libdir)/@PACKAGE@
pkgincludedir = $(includedir)/@PACKAGE@
+pkglibdir = $(libdir)/@PACKAGE@
+pkglibexecdir = $(libexecdir)/@PACKAGE@
am__cd = CDPATH="$${ZSH_VERSION+.}$(PATH_SEPARATOR)" && cd
install_sh_DATA = $(install_sh) -c -m 644
install_sh_PROGRAM = $(install_sh) -c
@@ -36,15 +38,21 @@ DIST_COMMON = $(srcdir)/Makefile.am $(srcdir)/Makefile.in
ACLOCAL_M4 = $(top_srcdir)/aclocal.m4
am__aclocal_m4_deps = $(top_srcdir)/m4/acx_pthread.m4 \
$(top_srcdir)/m4/getopt.m4 $(top_srcdir)/m4/gettext.m4 \
- $(top_srcdir)/m4/iconv.m4 $(top_srcdir)/m4/lib-ld.m4 \
+ $(top_srcdir)/m4/iconv.m4 $(top_srcdir)/m4/lc_cpucores.m4 \
+ $(top_srcdir)/m4/lc_physmem.m4 $(top_srcdir)/m4/lib-ld.m4 \
$(top_srcdir)/m4/lib-link.m4 $(top_srcdir)/m4/lib-prefix.m4 \
- $(top_srcdir)/m4/nls.m4 $(top_srcdir)/m4/po.m4 \
- $(top_srcdir)/m4/progtest.m4 $(top_srcdir)/configure.ac
+ $(top_srcdir)/m4/libtool.m4 $(top_srcdir)/m4/ltoptions.m4 \
+ $(top_srcdir)/m4/ltsugar.m4 $(top_srcdir)/m4/ltversion.m4 \
+ $(top_srcdir)/m4/lt~obsolete.m4 $(top_srcdir)/m4/nls.m4 \
+ $(top_srcdir)/m4/po.m4 $(top_srcdir)/m4/posix-shell.m4 \
+ $(top_srcdir)/m4/progtest.m4 $(top_srcdir)/m4/visibility.m4 \
+ $(top_srcdir)/configure.ac
am__configure_deps = $(am__aclocal_m4_deps) $(CONFIGURE_DEPENDENCIES) \
$(ACLOCAL_M4)
mkinstalldirs = $(install_sh) -d
CONFIG_HEADER = $(top_builddir)/config.h
CONFIG_CLEAN_FILES =
+CONFIG_CLEAN_VPATH_FILES =
SOURCES =
DIST_SOURCES =
RECURSIVE_TARGETS = all-recursive check-recursive dvi-recursive \
@@ -56,13 +64,43 @@ RECURSIVE_TARGETS = all-recursive check-recursive dvi-recursive \
ps-recursive uninstall-recursive
RECURSIVE_CLEAN_TARGETS = mostlyclean-recursive clean-recursive \
distclean-recursive maintainer-clean-recursive
+AM_RECURSIVE_TARGETS = $(RECURSIVE_TARGETS:-recursive=) \
+ $(RECURSIVE_CLEAN_TARGETS:-recursive=) tags TAGS ctags CTAGS \
+ distdir
ETAGS = etags
CTAGS = ctags
DIST_SUBDIRS = $(SUBDIRS)
DISTFILES = $(DIST_COMMON) $(DIST_SOURCES) $(TEXINFOS) $(EXTRA_DIST)
+am__relativize = \
+ dir0=`pwd`; \
+ sed_first='s,^\([^/]*\)/.*$$,\1,'; \
+ sed_rest='s,^[^/]*/*,,'; \
+ sed_last='s,^.*/\([^/]*\)$$,\1,'; \
+ sed_butlast='s,/*[^/]*$$,,'; \
+ while test -n "$$dir1"; do \
+ first=`echo "$$dir1" | sed -e "$$sed_first"`; \
+ if test "$$first" != "."; then \
+ if test "$$first" = ".."; then \
+ dir2=`echo "$$dir0" | sed -e "$$sed_last"`/"$$dir2"; \
+ dir0=`echo "$$dir0" | sed -e "$$sed_butlast"`; \
+ else \
+ first2=`echo "$$dir2" | sed -e "$$sed_first"`; \
+ if test "$$first2" = "$$first"; then \
+ dir2=`echo "$$dir2" | sed -e "$$sed_rest"`; \
+ else \
+ dir2="../$$dir2"; \
+ fi; \
+ dir0="$$dir0"/"$$first"; \
+ fi; \
+ fi; \
+ dir1=`echo "$$dir1" | sed -e "$$sed_rest"`; \
+ done; \
+ reldir="$$dir2"
ACLOCAL = @ACLOCAL@
AMTAR = @AMTAR@
+AM_CFLAGS = @AM_CFLAGS@
AR = @AR@
+AS = @AS@
AUTOCONF = @AUTOCONF@
AUTOHEADER = @AUTOHEADER@
AUTOMAKE = @AUTOMAKE@
@@ -76,22 +114,20 @@ CFLAGS = @CFLAGS@
CFLAG_VISIBILITY = @CFLAG_VISIBILITY@
CPP = @CPP@
CPPFLAGS = @CPPFLAGS@
-CXX = @CXX@
-CXXCPP = @CXXCPP@
-CXXDEPMODE = @CXXDEPMODE@
-CXXFLAGS = @CXXFLAGS@
CYGPATH_W = @CYGPATH_W@
DEFS = @DEFS@
DEPDIR = @DEPDIR@
+DLLTOOL = @DLLTOOL@
DSYMUTIL = @DSYMUTIL@
-ECHO = @ECHO@
+DUMPBIN = @DUMPBIN@
+DYNAMIC_CPPFLAGS = @DYNAMIC_CPPFLAGS@
+DYNAMIC_LDFLAGS = @DYNAMIC_LDFLAGS@
ECHO_C = @ECHO_C@
ECHO_N = @ECHO_N@
ECHO_T = @ECHO_T@
EGREP = @EGREP@
EXEEXT = @EXEEXT@
-F77 = @F77@
-FFLAGS = @FFLAGS@
+FGREP = @FGREP@
GETOPT_H = @GETOPT_H@
GMSGFMT = @GMSGFMT@
GMSGFMT_015 = @GMSGFMT_015@
@@ -104,12 +140,14 @@ INSTALL_SCRIPT = @INSTALL_SCRIPT@
INSTALL_STRIP_PROGRAM = @INSTALL_STRIP_PROGRAM@
INTLLIBS = @INTLLIBS@
INTL_MACOSX_LIBS = @INTL_MACOSX_LIBS@
+LD = @LD@
LDFLAGS = @LDFLAGS@
LIBICONV = @LIBICONV@
LIBINTL = @LIBINTL@
LIBOBJS = @LIBOBJS@
LIBS = @LIBS@
LIBTOOL = @LIBTOOL@
+LIPO = @LIPO@
LN_S = @LN_S@
LTLIBICONV = @LTLIBICONV@
LTLIBINTL = @LTLIBINTL@
@@ -119,23 +157,34 @@ MKDIR_P = @MKDIR_P@
MSGFMT = @MSGFMT@
MSGFMT_015 = @MSGFMT_015@
MSGMERGE = @MSGMERGE@
+NM = @NM@
NMEDIT = @NMEDIT@
+OBJDUMP = @OBJDUMP@
OBJEXT = @OBJEXT@
+OTOOL = @OTOOL@
+OTOOL64 = @OTOOL64@
PACKAGE = @PACKAGE@
PACKAGE_BUGREPORT = @PACKAGE_BUGREPORT@
+PACKAGE_HOMEPAGE = @PACKAGE_HOMEPAGE@
PACKAGE_NAME = @PACKAGE_NAME@
PACKAGE_STRING = @PACKAGE_STRING@
PACKAGE_TARNAME = @PACKAGE_TARNAME@
+PACKAGE_URL = @PACKAGE_URL@
PACKAGE_VERSION = @PACKAGE_VERSION@
PATH_SEPARATOR = @PATH_SEPARATOR@
+POSIX_SHELL = @POSIX_SHELL@
POSUB = @POSUB@
+PREFERABLY_POSIX_SHELL = @PREFERABLY_POSIX_SHELL@
PTHREAD_CC = @PTHREAD_CC@
PTHREAD_CFLAGS = @PTHREAD_CFLAGS@
PTHREAD_LIBS = @PTHREAD_LIBS@
RANLIB = @RANLIB@
+RC = @RC@
SED = @SED@
SET_MAKE = @SET_MAKE@
SHELL = @SHELL@
+STATIC_CPPFLAGS = @STATIC_CPPFLAGS@
+STATIC_LDFLAGS = @STATIC_LDFLAGS@
STRIP = @STRIP@
USE_NLS = @USE_NLS@
VERSION = @VERSION@
@@ -146,8 +195,7 @@ abs_srcdir = @abs_srcdir@
abs_top_builddir = @abs_top_builddir@
abs_top_srcdir = @abs_top_srcdir@
ac_ct_CC = @ac_ct_CC@
-ac_ct_CXX = @ac_ct_CXX@
-ac_ct_F77 = @ac_ct_F77@
+ac_ct_DUMPBIN = @ac_ct_DUMPBIN@
acx_pthread_config = @acx_pthread_config@
am__include = @am__include@
am__leading_dot = @am__leading_dot@
@@ -179,6 +227,7 @@ libdir = @libdir@
libexecdir = @libexecdir@
localedir = @localedir@
localstatedir = @localstatedir@
+lt_ECHO = @lt_ECHO@
mandir = @mandir@
mkdir_p = @mkdir_p@
oldincludedir = @oldincludedir@
@@ -194,7 +243,8 @@ target_alias = @target_alias@
top_build_prefix = @top_build_prefix@
top_builddir = @top_builddir@
top_srcdir = @top_srcdir@
-SUBDIRS = liblzma xz xzdec scripts
+xz = @xz@
+SUBDIRS = liblzma xz xzdec lzmainfo scripts
EXTRA_DIST = common
all: all-recursive
@@ -208,9 +258,9 @@ $(srcdir)/Makefile.in: $(srcdir)/Makefile.am $(am__configure_deps)
exit 1;; \
esac; \
done; \
- echo ' cd $(top_srcdir) && $(AUTOMAKE) --foreign src/Makefile'; \
- cd $(top_srcdir) && \
- $(AUTOMAKE) --foreign src/Makefile
+ echo ' cd $(top_srcdir) && $(AUTOMAKE) --foreign src/Makefile'; \
+ $(am__cd) $(top_srcdir) && \
+ $(AUTOMAKE) --foreign src/Makefile
.PRECIOUS: Makefile
Makefile: $(srcdir)/Makefile.in $(top_builddir)/config.status
@case '$?' in \
@@ -228,6 +278,7 @@ $(top_srcdir)/configure: $(am__configure_deps)
cd $(top_builddir) && $(MAKE) $(AM_MAKEFLAGS) am--refresh
$(ACLOCAL_M4): $(am__aclocal_m4_deps)
cd $(top_builddir) && $(MAKE) $(AM_MAKEFLAGS) am--refresh
+$(am__aclocal_m4_deps):
mostlyclean-libtool:
-rm -f *.lo
@@ -259,7 +310,7 @@ $(RECURSIVE_TARGETS):
else \
local_target="$$target"; \
fi; \
- (cd $$subdir && $(MAKE) $(AM_MAKEFLAGS) $$local_target) \
+ ($(am__cd) $$subdir && $(MAKE) $(AM_MAKEFLAGS) $$local_target) \
|| eval $$failcom; \
done; \
if test "$$dot_seen" = "no"; then \
@@ -293,16 +344,16 @@ $(RECURSIVE_CLEAN_TARGETS):
else \
local_target="$$target"; \
fi; \
- (cd $$subdir && $(MAKE) $(AM_MAKEFLAGS) $$local_target) \
+ ($(am__cd) $$subdir && $(MAKE) $(AM_MAKEFLAGS) $$local_target) \
|| eval $$failcom; \
done && test -z "$$fail"
tags-recursive:
list='$(SUBDIRS)'; for subdir in $$list; do \
- test "$$subdir" = . || (cd $$subdir && $(MAKE) $(AM_MAKEFLAGS) tags); \
+ test "$$subdir" = . || ($(am__cd) $$subdir && $(MAKE) $(AM_MAKEFLAGS) tags); \
done
ctags-recursive:
list='$(SUBDIRS)'; for subdir in $$list; do \
- test "$$subdir" = . || (cd $$subdir && $(MAKE) $(AM_MAKEFLAGS) ctags); \
+ test "$$subdir" = . || ($(am__cd) $$subdir && $(MAKE) $(AM_MAKEFLAGS) ctags); \
done
ID: $(HEADERS) $(SOURCES) $(LISP) $(TAGS_FILES)
@@ -317,7 +368,7 @@ tags: TAGS
TAGS: tags-recursive $(HEADERS) $(SOURCES) $(TAGS_DEPENDENCIES) \
$(TAGS_FILES) $(LISP)
- tags=; \
+ set x; \
here=`pwd`; \
if ($(ETAGS) --etags-include --version) >/dev/null 2>&1; then \
include_option=--etags-include; \
@@ -329,7 +380,7 @@ TAGS: tags-recursive $(HEADERS) $(SOURCES) $(TAGS_DEPENDENCIES) \
list='$(SUBDIRS)'; for subdir in $$list; do \
if test "$$subdir" = .; then :; else \
test ! -f $$subdir/TAGS || \
- tags="$$tags $$include_option=$$here/$$subdir/TAGS"; \
+ set "$$@" "$$include_option=$$here/$$subdir/TAGS"; \
fi; \
done; \
list='$(SOURCES) $(HEADERS) $(LISP) $(TAGS_FILES)'; \
@@ -338,29 +389,34 @@ TAGS: tags-recursive $(HEADERS) $(SOURCES) $(TAGS_DEPENDENCIES) \
done | \
$(AWK) '{ files[$$0] = 1; nonempty = 1; } \
END { if (nonempty) { for (i in files) print i; }; }'`; \
- if test -z "$(ETAGS_ARGS)$$tags$$unique"; then :; else \
+ shift; \
+ if test -z "$(ETAGS_ARGS)$$*$$unique"; then :; else \
test -n "$$unique" || unique=$$empty_fix; \
- $(ETAGS) $(ETAGSFLAGS) $(AM_ETAGSFLAGS) $(ETAGS_ARGS) \
- $$tags $$unique; \
+ if test $$# -gt 0; then \
+ $(ETAGS) $(ETAGSFLAGS) $(AM_ETAGSFLAGS) $(ETAGS_ARGS) \
+ "$$@" $$unique; \
+ else \
+ $(ETAGS) $(ETAGSFLAGS) $(AM_ETAGSFLAGS) $(ETAGS_ARGS) \
+ $$unique; \
+ fi; \
fi
ctags: CTAGS
CTAGS: ctags-recursive $(HEADERS) $(SOURCES) $(TAGS_DEPENDENCIES) \
$(TAGS_FILES) $(LISP)
- tags=; \
list='$(SOURCES) $(HEADERS) $(LISP) $(TAGS_FILES)'; \
unique=`for i in $$list; do \
if test -f "$$i"; then echo $$i; else echo $(srcdir)/$$i; fi; \
done | \
$(AWK) '{ files[$$0] = 1; nonempty = 1; } \
END { if (nonempty) { for (i in files) print i; }; }'`; \
- test -z "$(CTAGS_ARGS)$$tags$$unique" \
+ test -z "$(CTAGS_ARGS)$$unique" \
|| $(CTAGS) $(CTAGSFLAGS) $(AM_CTAGSFLAGS) $(CTAGS_ARGS) \
- $$tags $$unique
+ $$unique
GTAGS:
here=`$(am__cd) $(top_builddir) && pwd` \
- && cd $(top_srcdir) \
- && gtags -i $(GTAGS_ARGS) $$here
+ && $(am__cd) $(top_srcdir) \
+ && gtags -i $(GTAGS_ARGS) "$$here"
distclean-tags:
-rm -f TAGS ID GTAGS GRTAGS GSYMS GPATH tags
@@ -381,29 +437,44 @@ distdir: $(DISTFILES)
if test -f $$file || test -d $$file; then d=.; else d=$(srcdir); fi; \
if test -d $$d/$$file; then \
dir=`echo "/$$file" | sed -e 's,/[^/]*$$,,'`; \
+ if test -d "$(distdir)/$$file"; then \
+ find "$(distdir)/$$file" -type d ! -perm -700 -exec chmod u+rwx {} \;; \
+ fi; \
if test -d $(srcdir)/$$file && test $$d != $(srcdir); then \
- cp -pR $(srcdir)/$$file $(distdir)$$dir || exit 1; \
+ cp -fpR $(srcdir)/$$file "$(distdir)$$dir" || exit 1; \
+ find "$(distdir)/$$file" -type d ! -perm -700 -exec chmod u+rwx {} \;; \
fi; \
- cp -pR $$d/$$file $(distdir)$$dir || exit 1; \
+ cp -fpR $$d/$$file "$(distdir)$$dir" || exit 1; \
else \
- test -f $(distdir)/$$file \
- || cp -p $$d/$$file $(distdir)/$$file \
+ test -f "$(distdir)/$$file" \
+ || cp -p $$d/$$file "$(distdir)/$$file" \
|| exit 1; \
fi; \
done
- list='$(DIST_SUBDIRS)'; for subdir in $$list; do \
+ @list='$(DIST_SUBDIRS)'; for subdir in $$list; do \
if test "$$subdir" = .; then :; else \
test -d "$(distdir)/$$subdir" \
|| $(MKDIR_P) "$(distdir)/$$subdir" \
|| exit 1; \
- distdir=`$(am__cd) $(distdir) && pwd`; \
- top_distdir=`$(am__cd) $(top_distdir) && pwd`; \
- (cd $$subdir && \
+ fi; \
+ done
+ @list='$(DIST_SUBDIRS)'; for subdir in $$list; do \
+ if test "$$subdir" = .; then :; else \
+ dir1=$$subdir; dir2="$(distdir)/$$subdir"; \
+ $(am__relativize); \
+ new_distdir=$$reldir; \
+ dir1=$$subdir; dir2="$(top_distdir)"; \
+ $(am__relativize); \
+ new_top_distdir=$$reldir; \
+ echo " (cd $$subdir && $(MAKE) $(AM_MAKEFLAGS) top_distdir="$$new_top_distdir" distdir="$$new_distdir" \\"; \
+ echo " am__remove_distdir=: am__skip_length_check=: am__skip_mode_fix=: distdir)"; \
+ ($(am__cd) $$subdir && \
$(MAKE) $(AM_MAKEFLAGS) \
- top_distdir="$$top_distdir" \
- distdir="$$distdir/$$subdir" \
+ top_distdir="$$new_top_distdir" \
+ distdir="$$new_distdir" \
am__remove_distdir=: \
am__skip_length_check=: \
+ am__skip_mode_fix=: \
distdir) \
|| exit 1; \
fi; \
@@ -433,6 +504,7 @@ clean-generic:
distclean-generic:
-test -z "$(CONFIG_CLEAN_FILES)" || rm -f $(CONFIG_CLEAN_FILES)
+ -test . = "$(srcdir)" || test -z "$(CONFIG_CLEAN_VPATH_FILES)" || rm -f $(CONFIG_CLEAN_VPATH_FILES)
maintainer-clean-generic:
@echo "This command is intended for maintainers to use"
@@ -451,6 +523,8 @@ dvi-am:
html: html-recursive
+html-am:
+
info: info-recursive
info-am:
@@ -459,18 +533,28 @@ install-data-am:
install-dvi: install-dvi-recursive
+install-dvi-am:
+
install-exec-am:
install-html: install-html-recursive
+install-html-am:
+
install-info: install-info-recursive
+install-info-am:
+
install-man:
install-pdf: install-pdf-recursive
+install-pdf-am:
+
install-ps: install-ps-recursive
+install-ps-am:
+
installcheck-am:
maintainer-clean: maintainer-clean-recursive
@@ -491,8 +575,8 @@ ps-am:
uninstall-am:
-.MAKE: $(RECURSIVE_CLEAN_TARGETS) $(RECURSIVE_TARGETS) install-am \
- install-strip
+.MAKE: $(RECURSIVE_CLEAN_TARGETS) $(RECURSIVE_TARGETS) ctags-recursive \
+ install-am install-strip tags-recursive
.PHONY: $(RECURSIVE_CLEAN_TARGETS) $(RECURSIVE_TARGETS) CTAGS GTAGS \
all all-am check check-am clean clean-generic clean-libtool \
@@ -508,6 +592,7 @@ uninstall-am:
mostlyclean-libtool pdf pdf-am ps ps-am tags tags-recursive \
uninstall uninstall-am
+
# Tell versions [3.59,3.63) of GNU make to not export all variables.
# Otherwise a system limit (for SysV at least) may be exceeded.
.NOEXPORT:
diff --git a/Build/source/utils/xz-4.999.8beta/src/common/bswap.h b/Build/source/utils/xz-4.999.9beta/src/common/bswap.h
index f5cb834545f..c8cf125aeb8 100644
--- a/Build/source/utils/xz-4.999.8beta/src/common/bswap.h
+++ b/Build/source/utils/xz-4.999.9beta/src/common/bswap.h
@@ -3,11 +3,10 @@
/// \file bswap.h
/// \brief Byte swapping
//
-// This code has been put into the public domain.
+// Author: Lasse Collin
//
-// This library is distributed in the hope that it will be useful,
-// but WITHOUT ANY WARRANTY; without even the implied warranty of
-// MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.
+// This file has been put into the public domain.
+// You can do whatever you want with this file.
//
///////////////////////////////////////////////////////////////////////////////
diff --git a/Build/source/utils/xz-4.999.9beta/src/common/common_w32res.rc b/Build/source/utils/xz-4.999.9beta/src/common/common_w32res.rc
new file mode 100644
index 00000000000..ad9e165394a
--- /dev/null
+++ b/Build/source/utils/xz-4.999.9beta/src/common/common_w32res.rc
@@ -0,0 +1,53 @@
+/*
+ * Author: Lasse Collin
+ *
+ * This file has been put into the public domain.
+ * You can do whatever you want with this file.
+ */
+
+#include <winresrc.h>
+#include "config.h"
+#define LZMA_H_INTERNAL
+#define LZMA_H_INTERNAL_RC
+#include "lzma/version.h"
+
+#ifndef MY_BUILD
+# define MY_BUILD 0
+#endif
+#define MY_VERSION LZMA_VERSION_MAJOR,LZMA_VERSION_MINOR,LZMA_VERSION_PATCH,MY_BUILD
+
+#define MY_FILENAME MY_NAME MY_SUFFIX
+#define MY_COMPANY "Lasse Collin and Igor Pavlov"
+#define MY_COPYRIGHT "Public Domain by " MY_COMPANY
+#define MY_COMMENTS "http://tukaani.org/xz/"
+
+LANGUAGE LANG_ENGLISH, SUBLANG_ENGLISH_US
+VS_VERSION_INFO VERSIONINFO
+ FILEVERSION MY_VERSION
+ PRODUCTVERSION MY_VERSION
+ FILEFLAGSMASK VS_FFI_FILEFLAGSMASK
+ FILEFLAGS 0
+ FILEOS VOS_NT_WINDOWS32
+ FILETYPE MY_TYPE
+ FILESUBTYPE 0x0L
+BEGIN
+ BLOCK "StringFileInfo"
+ BEGIN
+ BLOCK "040904b0"
+ BEGIN
+ VALUE "Comments", MY_COMMENTS
+ VALUE "CompanyName", MY_COMPANY
+ VALUE "FileDescription", MY_DESC
+ VALUE "FileVersion", LZMA_VERSION_STRING
+ VALUE "InternalName", MY_NAME
+ VALUE "LegalCopyright", MY_COPYRIGHT
+ VALUE "OriginalFilename", MY_FILENAME
+ VALUE "ProductName", PACKAGE_NAME
+ VALUE "ProductVersion", LZMA_VERSION_STRING
+ END
+ END
+ BLOCK "VarFileInfo"
+ BEGIN
+ VALUE "Translation", 0x409, 1200
+ END
+END
diff --git a/Build/source/utils/xz-4.999.9beta/src/common/cpucores.h b/Build/source/utils/xz-4.999.9beta/src/common/cpucores.h
new file mode 100644
index 00000000000..704d8a26e54
--- /dev/null
+++ b/Build/source/utils/xz-4.999.9beta/src/common/cpucores.h
@@ -0,0 +1,51 @@
+///////////////////////////////////////////////////////////////////////////////
+//
+/// \file cpucores.h
+/// \brief Get the number of online CPU cores
+//
+// Author: Lasse Collin
+//
+// This file has been put into the public domain.
+// You can do whatever you want with this file.
+//
+///////////////////////////////////////////////////////////////////////////////
+
+#ifndef CPUCORES_H
+#define CPUCORES_H
+
+#if defined(HAVE_CPUCORES_SYSCONF)
+# include <unistd.h>
+
+#elif defined(HAVE_CPUCORES_SYSCTL)
+# ifdef HAVE_SYS_PARAM_H
+# include <sys/param.h>
+# endif
+# ifdef HAVE_SYS_SYSCTL_H
+# include <sys/sysctl.h>
+# endif
+#endif
+
+
+static inline uint32_t
+cpucores(void)
+{
+ uint32_t ret = 0;
+
+#if defined(HAVE_CPUCORES_SYSCONF)
+ const long cpus = sysconf(_SC_NPROCESSORS_ONLN);
+ if (cpus > 0)
+ ret = (uint32_t)(cpus);
+
+#elif defined(HAVE_CPUCORES_SYSCTL)
+ int name[2] = { CTL_HW, HW_NCPU };
+ int cpus;
+ size_t cpus_size = sizeof(cpus);
+ if (!sysctl(name, &cpus, &cpus_size, NULL, NULL)
+ && cpus_size == sizeof(cpus) && cpus > 0)
+ ret = (uint32_t)(cpus);
+#endif
+
+ return ret;
+}
+
+#endif
diff --git a/Build/source/utils/xz-4.999.8beta/src/common/integer.h b/Build/source/utils/xz-4.999.9beta/src/common/integer.h
index 9addf965dfc..518c2a4e91d 100644
--- a/Build/source/utils/xz-4.999.8beta/src/common/integer.h
+++ b/Build/source/utils/xz-4.999.9beta/src/common/integer.h
@@ -3,11 +3,10 @@
/// \file integer.h
/// \brief Reading and writing integers from and to buffers
//
-// This code has been put into the public domain.
+// Author: Lasse Collin
//
-// This library is distributed in the hope that it will be useful,
-// but WITHOUT ANY WARRANTY; without even the implied warranty of
-// MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.
+// This file has been put into the public domain.
+// You can do whatever you want with this file.
//
///////////////////////////////////////////////////////////////////////////////
diff --git a/Build/source/utils/xz-4.999.8beta/src/common/mythread.h b/Build/source/utils/xz-4.999.9beta/src/common/mythread.h
index ee8a341de52..476c2fc9e10 100644
--- a/Build/source/utils/xz-4.999.8beta/src/common/mythread.h
+++ b/Build/source/utils/xz-4.999.9beta/src/common/mythread.h
@@ -3,8 +3,10 @@
/// \file mythread.h
/// \brief Wrappers for threads
//
-// Author: Lasse Collin
+// Author: Lasse Collin
+//
// This file has been put into the public domain.
+// You can do whatever you want with this file.
//
///////////////////////////////////////////////////////////////////////////////
diff --git a/Build/source/utils/xz-4.999.8beta/src/common/open_stdxxx.h b/Build/source/utils/xz-4.999.9beta/src/common/open_stdxxx.h
index d0ac15af3f7..22300851a2a 100644
--- a/Build/source/utils/xz-4.999.8beta/src/common/open_stdxxx.h
+++ b/Build/source/utils/xz-4.999.9beta/src/common/open_stdxxx.h
@@ -3,11 +3,10 @@
/// \file open_stdxxx.h
/// \brief Make sure that file descriptors 0, 1, and 2 are open
//
-// This code has been put into the public domain.
+// Author: Lasse Collin
//
-// This library is distributed in the hope that it will be useful,
-// but WITHOUT ANY WARRANTY; without even the implied warranty of
-// MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.
+// This file has been put into the public domain.
+// You can do whatever you want with this file.
//
///////////////////////////////////////////////////////////////////////////////
diff --git a/Build/source/utils/xz-4.999.9beta/src/common/physmem.h b/Build/source/utils/xz-4.999.9beta/src/common/physmem.h
new file mode 100644
index 00000000000..63482c6c868
--- /dev/null
+++ b/Build/source/utils/xz-4.999.9beta/src/common/physmem.h
@@ -0,0 +1,134 @@
+///////////////////////////////////////////////////////////////////////////////
+//
+/// \file physmem.h
+/// \brief Get the amount of physical memory
+//
+// Author: Lasse Collin
+//
+// This file has been put into the public domain.
+// You can do whatever you want with this file.
+//
+///////////////////////////////////////////////////////////////////////////////
+
+#ifndef PHYSMEM_H
+#define PHYSMEM_H
+
+// Test for Windows first, because we want to use Windows-specific code
+// on Cygwin, which also has memory information available via sysconf(), but
+// on Cygwin 1.5 and older it gives wrong results (from our point of view).
+#if defined(_WIN32) || defined(__CYGWIN__)
+# ifndef _WIN32_WINNT
+# define _WIN32_WINNT 0x0500
+# endif
+# include <windows.h>
+
+#elif defined(HAVE_PHYSMEM_SYSCONF)
+# include <unistd.h>
+
+#elif defined(HAVE_PHYSMEM_SYSCTL)
+# ifdef HAVE_SYS_PARAM_H
+# include <sys/param.h>
+# endif
+# ifdef HAVE_SYS_SYSCTL_H
+# include <sys/sysctl.h>
+# endif
+
+#elif defined(HAVE_PHYSMEM_SYSINFO)
+# include <sys/sysinfo.h>
+
+#elif defined(__DJGPP__)
+# include <dpmi.h>
+#endif
+
+
+/// \brief Get the amount of physical memory in bytes
+///
+/// \return Amount of physical memory in bytes. On error, zero is
+/// returned.
+static inline uint64_t
+physmem(void)
+{
+ uint64_t ret = 0;
+
+#if defined(_WIN32) || defined(__CYGWIN__)
+ if ((GetVersion() & 0xFF) >= 5) {
+ // Windows 2000 and later have GlobalMemoryStatusEx() which
+ // supports reporting values greater than 4 GiB. To keep the
+ // code working also on older Windows versions, use
+ // GlobalMemoryStatusEx() conditionally.
+ HMODULE kernel32 = GetModuleHandle("kernel32.dll");
+ if (kernel32 != NULL) {
+ BOOL (WINAPI *gmse)(LPMEMORYSTATUSEX) = GetProcAddress(
+ kernel32, "GlobalMemoryStatusEx");
+ if (gmse != NULL) {
+ MEMORYSTATUSEX meminfo;
+ meminfo.dwLength = sizeof(meminfo);
+ if (gmse(&meminfo))
+ ret = meminfo.ullTotalPhys;
+ }
+ }
+ }
+
+ if (ret == 0) {
+ // GlobalMemoryStatus() is supported by Windows 95 and later,
+ // so it is fine to link against it unconditionally. Note that
+ // GlobalMemoryStatus() has no return value.
+ MEMORYSTATUS meminfo;
+ meminfo.dwLength = sizeof(meminfo);
+ GlobalMemoryStatus(&meminfo);
+ ret = meminfo.dwTotalPhys;
+ }
+
+#elif defined(HAVE_PHYSMEM_SYSCONF)
+ const long pagesize = sysconf(_SC_PAGESIZE);
+ const long pages = sysconf(_SC_PHYS_PAGES);
+ if (pagesize != -1 || pages != -1)
+ // According to docs, pagesize * pages can overflow.
+ // Simple case is 32-bit box with 4 GiB or more RAM,
+ // which may report exactly 4 GiB of RAM, and "long"
+ // being 32-bit will overflow. Casting to uint64_t
+ // hopefully avoids overflows in the near future.
+ ret = (uint64_t)(pagesize) * (uint64_t)(pages);
+
+#elif defined(HAVE_PHYSMEM_SYSCTL)
+ int name[2] = {
+ CTL_HW,
+#ifdef HW_PHYSMEM64
+ HW_PHYSMEM64
+#else
+ HW_PHYSMEM
+#endif
+ };
+ union {
+ uint32_t u32;
+ uint64_t u64;
+ } mem;
+ size_t mem_ptr_size = sizeof(mem.u64);
+ if (!sysctl(name, 2, &mem.u64, &mem_ptr_size, NULL, NULL)) {
+ // IIRC, 64-bit "return value" is possible on some 64-bit
+ // BSD systems even with HW_PHYSMEM (instead of HW_PHYSMEM64),
+ // so support both.
+ if (mem_ptr_size == sizeof(mem.u64))
+ ret = mem.u64;
+ else if (mem_ptr_size == sizeof(mem.u32))
+ ret = mem.u32;
+ }
+
+#elif defined(HAVE_PHYSMEM_SYSINFO)
+ struct sysinfo si;
+ if (sysinfo(&si) == 0)
+ ret = (uint64_t)(si.totalram) * si.mem_unit;
+
+#elif defined(__DJGPP__)
+ __dpmi_free_mem_info meminfo;
+ if (__dpmi_get_free_memory_information(&meminfo) == 0
+ && meminfo.total_number_of_physical_pages
+ != (unsigned long)(-1))
+ ret = (uint64_t)(meminfo.total_number_of_physical_pages)
+ * 4096;
+#endif
+
+ return ret;
+}
+
+#endif
diff --git a/Build/source/utils/xz-4.999.8beta/src/common/sysdefs.h b/Build/source/utils/xz-4.999.9beta/src/common/sysdefs.h
index f55c2360aa7..fbc9176a8a1 100644
--- a/Build/source/utils/xz-4.999.8beta/src/common/sysdefs.h
+++ b/Build/source/utils/xz-4.999.9beta/src/common/sysdefs.h
@@ -6,17 +6,10 @@
/// This file is used also by the lzma command line tool, that's why this
/// file is separate from common.h.
//
-// Copyright (C) 2007 Lasse Collin
+// Author: Lasse Collin
//
-// This library is free software; you can redistribute it and/or
-// modify it under the terms of the GNU Lesser General Public
-// License as published by the Free Software Foundation; either
-// version 2.1 of the License, or (at your option) any later version.
-//
-// This library is distributed in the hope that it will be useful,
-// but WITHOUT ANY WARRANTY; without even the implied warranty of
-// MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the GNU
-// Lesser General Public License for more details.
+// This file has been put into the public domain.
+// You can do whatever you want with this file.
//
///////////////////////////////////////////////////////////////////////////////
@@ -154,6 +147,10 @@ typedef unsigned char _Bool;
// Macros //
////////////
+#if defined(_WIN32) || defined(__MSDOS__) || defined(__OS2__)
+# define DOSLIKE 1
+#endif
+
#undef memzero
#define memzero(s, n) memset(s, 0, n)
diff --git a/Build/source/utils/xz-4.999.9beta/src/liblzma/Makefile.am b/Build/source/utils/xz-4.999.9beta/src/liblzma/Makefile.am
new file mode 100644
index 00000000000..6d5753b14fc
--- /dev/null
+++ b/Build/source/utils/xz-4.999.9beta/src/liblzma/Makefile.am
@@ -0,0 +1,94 @@
+##
+## Author: Lasse Collin
+##
+## This file has been put into the public domain.
+## You can do whatever you want with this file.
+##
+
+SUBDIRS = api
+
+EXTRA_DIST =
+CLEANFILES =
+doc_DATA =
+
+lib_LTLIBRARIES = liblzma.la
+liblzma_la_SOURCES =
+liblzma_la_CPPFLAGS = \
+ -I$(top_srcdir)/src/liblzma/api \
+ -I$(top_srcdir)/src/liblzma/common \
+ -I$(top_srcdir)/src/liblzma/check \
+ -I$(top_srcdir)/src/liblzma/lz \
+ -I$(top_srcdir)/src/liblzma/rangecoder \
+ -I$(top_srcdir)/src/liblzma/lzma \
+ -I$(top_srcdir)/src/liblzma/subblock \
+ -I$(top_srcdir)/src/liblzma/delta \
+ -I$(top_srcdir)/src/liblzma/simple \
+ -I$(top_srcdir)/src/common
+liblzma_la_LDFLAGS = -no-undefined -version-info 0:0:0
+
+include $(srcdir)/common/Makefile.inc
+include $(srcdir)/check/Makefile.inc
+
+if COND_FILTER_LZ
+include $(srcdir)/lz/Makefile.inc
+endif
+
+if COND_FILTER_LZMA1
+include $(srcdir)/lzma/Makefile.inc
+include $(srcdir)/rangecoder/Makefile.inc
+endif
+
+if COND_FILTER_SUBBLOCK
+include $(srcdir)/subblock/Makefile.inc
+endif
+
+if COND_FILTER_DELTA
+include $(srcdir)/delta/Makefile.inc
+endif
+
+if COND_FILTER_SIMPLE
+include $(srcdir)/simple/Makefile.inc
+endif
+
+
+## Windows-specific stuff
+
+# Windows resource compiler support. libtool knows what to do with .rc
+# files, but Automake (<= 1.11 at least) doesn't know.
+#
+# We want the resource file only in shared liblzma. To avoid linking it into
+# static liblzma, we overwrite the static object file with an object file
+# compiled from empty input. Note that GNU-specific features are OK here,
+# because on Windows we are compiled with the GNU toolchain.
+.rc.lo:
+ $(LIBTOOL) --mode=compile $(RC) $(DEFS) $(DEFAULT_INCLUDES) \
+ $(INCLUDES) $(liblzma_la_CPPFLAGS) $(CPPFLAGS) $(RCFLAGS) \
+ -i $< -o $@
+ echo > empty.c
+ $(COMPILE) -c empty.c -o $(*D)/$(*F).o
+
+# Remove ordinals from the generated .def file. People must link by name,
+# not by ordinal, because no one is going to track the ordinal numbers.
+liblzma.def: liblzma.la liblzma.def.in
+ sed 's/ \+@ *[0-9]\+//' liblzma.def.in > liblzma.def
+
+# Creating liblzma.def.in is a side effect of linking the library.
+liblzma.def.in: liblzma.la
+
+if COND_W32
+CLEANFILES += liblzma.def liblzma.def.in empty.c
+liblzma_la_SOURCES += liblzma_w32res.rc
+liblzma_la_LDFLAGS += -Xlinker --output-def -Xlinker liblzma.def.in
+
+## liblzma.def.in is created only when building shared liblzma, so don't
+## try to create liblzma.def when not building shared liblzma.
+if COND_SHARED
+doc_DATA += liblzma.def
+endif
+endif
+
+
+## pkg-config
+pkgconfigdir = $(libdir)/pkgconfig
+pkgconfig_DATA = liblzma.pc
+EXTRA_DIST += liblzma.pc.in
diff --git a/Build/source/utils/xz-4.999.9beta/src/liblzma/Makefile.in b/Build/source/utils/xz-4.999.9beta/src/liblzma/Makefile.in
new file mode 100644
index 00000000000..7d401e58b45
--- /dev/null
+++ b/Build/source/utils/xz-4.999.9beta/src/liblzma/Makefile.in
@@ -0,0 +1,1728 @@
+# Makefile.in generated by automake 1.11 from Makefile.am.
+# @configure_input@
+
+# Copyright (C) 1994, 1995, 1996, 1997, 1998, 1999, 2000, 2001, 2002,
+# 2003, 2004, 2005, 2006, 2007, 2008, 2009 Free Software Foundation,
+# Inc.
+# This Makefile.in is free software; the Free Software Foundation
+# gives unlimited permission to copy and/or distribute it,
+# with or without modifications, as long as this notice is preserved.
+
+# This program is distributed in the hope that it will be useful,
+# but WITHOUT ANY WARRANTY, to the extent permitted by law; without
+# even the implied warranty of MERCHANTABILITY or FITNESS FOR A
+# PARTICULAR PURPOSE.
+
+@SET_MAKE@
+
+
+VPATH = @srcdir@
+pkgdatadir = $(datadir)/@PACKAGE@
+pkgincludedir = $(includedir)/@PACKAGE@
+pkglibdir = $(libdir)/@PACKAGE@
+pkglibexecdir = $(libexecdir)/@PACKAGE@
+am__cd = CDPATH="$${ZSH_VERSION+.}$(PATH_SEPARATOR)" && cd
+install_sh_DATA = $(install_sh) -c -m 644
+install_sh_PROGRAM = $(install_sh) -c
+install_sh_SCRIPT = $(install_sh) -c
+INSTALL_HEADER = $(INSTALL_DATA)
+transform = $(program_transform_name)
+NORMAL_INSTALL = :
+PRE_INSTALL = :
+POST_INSTALL = :
+NORMAL_UNINSTALL = :
+PRE_UNINSTALL = :
+POST_UNINSTALL = :
+build_triplet = @build@
+host_triplet = @host@
+DIST_COMMON = $(srcdir)/Makefile.am $(srcdir)/Makefile.in \
+ $(srcdir)/check/Makefile.inc $(srcdir)/common/Makefile.inc \
+ $(srcdir)/delta/Makefile.inc $(srcdir)/liblzma.pc.in \
+ $(srcdir)/lz/Makefile.inc $(srcdir)/lzma/Makefile.inc \
+ $(srcdir)/rangecoder/Makefile.inc \
+ $(srcdir)/simple/Makefile.inc $(srcdir)/subblock/Makefile.inc
+@COND_MAIN_ENCODER_TRUE@am__append_1 = \
+@COND_MAIN_ENCODER_TRUE@ common/alone_encoder.c \
+@COND_MAIN_ENCODER_TRUE@ common/block_buffer_encoder.c \
+@COND_MAIN_ENCODER_TRUE@ common/block_encoder.c \
+@COND_MAIN_ENCODER_TRUE@ common/block_encoder.h \
+@COND_MAIN_ENCODER_TRUE@ common/block_header_encoder.c \
+@COND_MAIN_ENCODER_TRUE@ common/easy_buffer_encoder.c \
+@COND_MAIN_ENCODER_TRUE@ common/easy_encoder.c \
+@COND_MAIN_ENCODER_TRUE@ common/easy_encoder_memusage.c \
+@COND_MAIN_ENCODER_TRUE@ common/filter_buffer_encoder.c \
+@COND_MAIN_ENCODER_TRUE@ common/filter_encoder.c \
+@COND_MAIN_ENCODER_TRUE@ common/filter_encoder.h \
+@COND_MAIN_ENCODER_TRUE@ common/filter_flags_encoder.c \
+@COND_MAIN_ENCODER_TRUE@ common/index_encoder.c \
+@COND_MAIN_ENCODER_TRUE@ common/index_encoder.h \
+@COND_MAIN_ENCODER_TRUE@ common/stream_buffer_encoder.c \
+@COND_MAIN_ENCODER_TRUE@ common/stream_encoder.c \
+@COND_MAIN_ENCODER_TRUE@ common/stream_encoder.h \
+@COND_MAIN_ENCODER_TRUE@ common/stream_flags_encoder.c \
+@COND_MAIN_ENCODER_TRUE@ common/vli_encoder.c
+
+@COND_MAIN_DECODER_TRUE@am__append_2 = \
+@COND_MAIN_DECODER_TRUE@ common/alone_decoder.c \
+@COND_MAIN_DECODER_TRUE@ common/alone_decoder.h \
+@COND_MAIN_DECODER_TRUE@ common/auto_decoder.c \
+@COND_MAIN_DECODER_TRUE@ common/block_buffer_decoder.c \
+@COND_MAIN_DECODER_TRUE@ common/block_decoder.c \
+@COND_MAIN_DECODER_TRUE@ common/block_decoder.h \
+@COND_MAIN_DECODER_TRUE@ common/block_header_decoder.c \
+@COND_MAIN_DECODER_TRUE@ common/easy_decoder_memusage.c \
+@COND_MAIN_DECODER_TRUE@ common/filter_buffer_decoder.c \
+@COND_MAIN_DECODER_TRUE@ common/filter_decoder.c \
+@COND_MAIN_DECODER_TRUE@ common/filter_decoder.h \
+@COND_MAIN_DECODER_TRUE@ common/filter_flags_decoder.c \
+@COND_MAIN_DECODER_TRUE@ common/index_decoder.c \
+@COND_MAIN_DECODER_TRUE@ common/index_hash.c \
+@COND_MAIN_DECODER_TRUE@ common/stream_buffer_decoder.c \
+@COND_MAIN_DECODER_TRUE@ common/stream_decoder.c \
+@COND_MAIN_DECODER_TRUE@ common/stream_decoder.h \
+@COND_MAIN_DECODER_TRUE@ common/stream_flags_decoder.c \
+@COND_MAIN_DECODER_TRUE@ common/vli_decoder.c
+
+@COND_CHECK_CRC32_TRUE@@COND_SMALL_TRUE@am__append_3 = check/crc32_small.c
+@COND_CHECK_CRC32_TRUE@@COND_SMALL_FALSE@am__append_4 = \
+@COND_CHECK_CRC32_TRUE@@COND_SMALL_FALSE@ check/crc32_table.c \
+@COND_CHECK_CRC32_TRUE@@COND_SMALL_FALSE@ check/crc32_table_le.h \
+@COND_CHECK_CRC32_TRUE@@COND_SMALL_FALSE@ check/crc32_table_be.h
+
+@COND_ASM_X86_TRUE@@COND_CHECK_CRC32_TRUE@@COND_SMALL_FALSE@am__append_5 = check/crc32_x86.S
+@COND_ASM_X86_FALSE@@COND_CHECK_CRC32_TRUE@@COND_SMALL_FALSE@am__append_6 = check/crc32_fast.c
+@COND_CHECK_CRC64_TRUE@@COND_SMALL_TRUE@am__append_7 = check/crc64_small.c
+@COND_CHECK_CRC64_TRUE@@COND_SMALL_FALSE@am__append_8 = \
+@COND_CHECK_CRC64_TRUE@@COND_SMALL_FALSE@ check/crc64_table.c \
+@COND_CHECK_CRC64_TRUE@@COND_SMALL_FALSE@ check/crc64_table_le.h \
+@COND_CHECK_CRC64_TRUE@@COND_SMALL_FALSE@ check/crc64_table_be.h
+
+@COND_ASM_X86_TRUE@@COND_CHECK_CRC64_TRUE@@COND_SMALL_FALSE@am__append_9 = check/crc64_x86.S
+@COND_ASM_X86_FALSE@@COND_CHECK_CRC64_TRUE@@COND_SMALL_FALSE@am__append_10 = check/crc64_fast.c
+@COND_CHECK_SHA256_TRUE@am__append_11 = check/sha256.c
+@COND_ENCODER_LZ_TRUE@@COND_FILTER_LZ_TRUE@am__append_12 = \
+@COND_ENCODER_LZ_TRUE@@COND_FILTER_LZ_TRUE@ lz/lz_encoder.c \
+@COND_ENCODER_LZ_TRUE@@COND_FILTER_LZ_TRUE@ lz/lz_encoder.h \
+@COND_ENCODER_LZ_TRUE@@COND_FILTER_LZ_TRUE@ lz/lz_encoder_hash.h \
+@COND_ENCODER_LZ_TRUE@@COND_FILTER_LZ_TRUE@ lz/lz_encoder_mf.c
+
+@COND_DECODER_LZ_TRUE@@COND_FILTER_LZ_TRUE@am__append_13 = \
+@COND_DECODER_LZ_TRUE@@COND_FILTER_LZ_TRUE@ lz/lz_decoder.c \
+@COND_DECODER_LZ_TRUE@@COND_FILTER_LZ_TRUE@ lz/lz_decoder.h
+
+@COND_FILTER_LZMA1_TRUE@am__append_14 = lzma/fastpos_tablegen.c \
+@COND_FILTER_LZMA1_TRUE@ rangecoder/price_tablegen.c
+@COND_FILTER_LZMA1_TRUE@am__append_15 = lzma/lzma_common.h
+@COND_ENCODER_LZMA1_TRUE@@COND_FILTER_LZMA1_TRUE@am__append_16 = \
+@COND_ENCODER_LZMA1_TRUE@@COND_FILTER_LZMA1_TRUE@ lzma/fastpos.h \
+@COND_ENCODER_LZMA1_TRUE@@COND_FILTER_LZMA1_TRUE@ lzma/lzma_encoder.h \
+@COND_ENCODER_LZMA1_TRUE@@COND_FILTER_LZMA1_TRUE@ lzma/lzma_encoder.c \
+@COND_ENCODER_LZMA1_TRUE@@COND_FILTER_LZMA1_TRUE@ lzma/lzma_encoder_presets.c \
+@COND_ENCODER_LZMA1_TRUE@@COND_FILTER_LZMA1_TRUE@ lzma/lzma_encoder_private.h \
+@COND_ENCODER_LZMA1_TRUE@@COND_FILTER_LZMA1_TRUE@ lzma/lzma_encoder_optimum_fast.c \
+@COND_ENCODER_LZMA1_TRUE@@COND_FILTER_LZMA1_TRUE@ lzma/lzma_encoder_optimum_normal.c
+
+@COND_ENCODER_LZMA1_TRUE@@COND_FILTER_LZMA1_TRUE@@COND_SMALL_FALSE@am__append_17 = lzma/fastpos_table.c
+@COND_DECODER_LZMA1_TRUE@@COND_FILTER_LZMA1_TRUE@am__append_18 = \
+@COND_DECODER_LZMA1_TRUE@@COND_FILTER_LZMA1_TRUE@ lzma/lzma_decoder.c \
+@COND_DECODER_LZMA1_TRUE@@COND_FILTER_LZMA1_TRUE@ lzma/lzma_decoder.h
+
+@COND_ENCODER_LZMA2_TRUE@@COND_FILTER_LZMA1_TRUE@am__append_19 = \
+@COND_ENCODER_LZMA2_TRUE@@COND_FILTER_LZMA1_TRUE@ lzma/lzma2_encoder.c \
+@COND_ENCODER_LZMA2_TRUE@@COND_FILTER_LZMA1_TRUE@ lzma/lzma2_encoder.h
+
+@COND_DECODER_LZMA2_TRUE@@COND_FILTER_LZMA1_TRUE@am__append_20 = \
+@COND_DECODER_LZMA2_TRUE@@COND_FILTER_LZMA1_TRUE@ lzma/lzma2_decoder.c \
+@COND_DECODER_LZMA2_TRUE@@COND_FILTER_LZMA1_TRUE@ lzma/lzma2_decoder.h
+
+@COND_FILTER_LZMA1_TRUE@am__append_21 = rangecoder/range_common.h
+@COND_ENCODER_LZMA1_TRUE@@COND_FILTER_LZMA1_TRUE@am__append_22 = \
+@COND_ENCODER_LZMA1_TRUE@@COND_FILTER_LZMA1_TRUE@ rangecoder/range_encoder.h \
+@COND_ENCODER_LZMA1_TRUE@@COND_FILTER_LZMA1_TRUE@ rangecoder/price.h \
+@COND_ENCODER_LZMA1_TRUE@@COND_FILTER_LZMA1_TRUE@ rangecoder/price_table.c
+
+@COND_DECODER_LZMA1_TRUE@@COND_FILTER_LZMA1_TRUE@am__append_23 = rangecoder/range_decoder.h
+@COND_ENCODER_SUBBLOCK_TRUE@@COND_FILTER_SUBBLOCK_TRUE@am__append_24 = \
+@COND_ENCODER_SUBBLOCK_TRUE@@COND_FILTER_SUBBLOCK_TRUE@ subblock/subblock_encoder.c \
+@COND_ENCODER_SUBBLOCK_TRUE@@COND_FILTER_SUBBLOCK_TRUE@ subblock/subblock_encoder.h
+
+@COND_DECODER_SUBBLOCK_TRUE@@COND_FILTER_SUBBLOCK_TRUE@am__append_25 = \
+@COND_DECODER_SUBBLOCK_TRUE@@COND_FILTER_SUBBLOCK_TRUE@ subblock/subblock_decoder.c \
+@COND_DECODER_SUBBLOCK_TRUE@@COND_FILTER_SUBBLOCK_TRUE@ subblock/subblock_decoder.h \
+@COND_DECODER_SUBBLOCK_TRUE@@COND_FILTER_SUBBLOCK_TRUE@ subblock/subblock_decoder_helper.c \
+@COND_DECODER_SUBBLOCK_TRUE@@COND_FILTER_SUBBLOCK_TRUE@ subblock/subblock_decoder_helper.h
+
+@COND_FILTER_DELTA_TRUE@am__append_26 = \
+@COND_FILTER_DELTA_TRUE@ delta/delta_common.c \
+@COND_FILTER_DELTA_TRUE@ delta/delta_common.h \
+@COND_FILTER_DELTA_TRUE@ delta/delta_private.h
+
+@COND_ENCODER_DELTA_TRUE@@COND_FILTER_DELTA_TRUE@am__append_27 = \
+@COND_ENCODER_DELTA_TRUE@@COND_FILTER_DELTA_TRUE@ delta/delta_encoder.c \
+@COND_ENCODER_DELTA_TRUE@@COND_FILTER_DELTA_TRUE@ delta/delta_encoder.h
+
+@COND_DECODER_DELTA_TRUE@@COND_FILTER_DELTA_TRUE@am__append_28 = \
+@COND_DECODER_DELTA_TRUE@@COND_FILTER_DELTA_TRUE@ delta/delta_decoder.c \
+@COND_DECODER_DELTA_TRUE@@COND_FILTER_DELTA_TRUE@ delta/delta_decoder.h
+
+@COND_FILTER_SIMPLE_TRUE@am__append_29 = \
+@COND_FILTER_SIMPLE_TRUE@ simple/simple_coder.c \
+@COND_FILTER_SIMPLE_TRUE@ simple/simple_coder.h \
+@COND_FILTER_SIMPLE_TRUE@ simple/simple_private.h
+
+@COND_ENCODER_SIMPLE_TRUE@@COND_FILTER_SIMPLE_TRUE@am__append_30 = \
+@COND_ENCODER_SIMPLE_TRUE@@COND_FILTER_SIMPLE_TRUE@ simple/simple_encoder.c \
+@COND_ENCODER_SIMPLE_TRUE@@COND_FILTER_SIMPLE_TRUE@ simple/simple_encoder.h
+
+@COND_DECODER_SIMPLE_TRUE@@COND_FILTER_SIMPLE_TRUE@am__append_31 = \
+@COND_DECODER_SIMPLE_TRUE@@COND_FILTER_SIMPLE_TRUE@ simple/simple_decoder.c \
+@COND_DECODER_SIMPLE_TRUE@@COND_FILTER_SIMPLE_TRUE@ simple/simple_decoder.h
+
+@COND_FILTER_SIMPLE_TRUE@@COND_FILTER_X86_TRUE@am__append_32 = simple/x86.c
+@COND_FILTER_POWERPC_TRUE@@COND_FILTER_SIMPLE_TRUE@am__append_33 = simple/powerpc.c
+@COND_FILTER_IA64_TRUE@@COND_FILTER_SIMPLE_TRUE@am__append_34 = simple/ia64.c
+@COND_FILTER_ARM_TRUE@@COND_FILTER_SIMPLE_TRUE@am__append_35 = simple/arm.c
+@COND_FILTER_ARMTHUMB_TRUE@@COND_FILTER_SIMPLE_TRUE@am__append_36 = simple/armthumb.c
+@COND_FILTER_SIMPLE_TRUE@@COND_FILTER_SPARC_TRUE@am__append_37 = simple/sparc.c
+@COND_W32_TRUE@am__append_38 = liblzma.def liblzma.def.in empty.c
+@COND_W32_TRUE@am__append_39 = liblzma_w32res.rc
+@COND_W32_TRUE@am__append_40 = -Xlinker --output-def -Xlinker liblzma.def.in
+@COND_SHARED_TRUE@@COND_W32_TRUE@am__append_41 = liblzma.def
+subdir = src/liblzma
+ACLOCAL_M4 = $(top_srcdir)/aclocal.m4
+am__aclocal_m4_deps = $(top_srcdir)/m4/acx_pthread.m4 \
+ $(top_srcdir)/m4/getopt.m4 $(top_srcdir)/m4/gettext.m4 \
+ $(top_srcdir)/m4/iconv.m4 $(top_srcdir)/m4/lc_cpucores.m4 \
+ $(top_srcdir)/m4/lc_physmem.m4 $(top_srcdir)/m4/lib-ld.m4 \
+ $(top_srcdir)/m4/lib-link.m4 $(top_srcdir)/m4/lib-prefix.m4 \
+ $(top_srcdir)/m4/libtool.m4 $(top_srcdir)/m4/ltoptions.m4 \
+ $(top_srcdir)/m4/ltsugar.m4 $(top_srcdir)/m4/ltversion.m4 \
+ $(top_srcdir)/m4/lt~obsolete.m4 $(top_srcdir)/m4/nls.m4 \
+ $(top_srcdir)/m4/po.m4 $(top_srcdir)/m4/posix-shell.m4 \
+ $(top_srcdir)/m4/progtest.m4 $(top_srcdir)/m4/visibility.m4 \
+ $(top_srcdir)/configure.ac
+am__configure_deps = $(am__aclocal_m4_deps) $(CONFIGURE_DEPENDENCIES) \
+ $(ACLOCAL_M4)
+mkinstalldirs = $(install_sh) -d
+CONFIG_HEADER = $(top_builddir)/config.h
+CONFIG_CLEAN_FILES = liblzma.pc
+CONFIG_CLEAN_VPATH_FILES =
+am__vpath_adj_setup = srcdirstrip=`echo "$(srcdir)" | sed 's|.|.|g'`;
+am__vpath_adj = case $$p in \
+ $(srcdir)/*) f=`echo "$$p" | sed "s|^$$srcdirstrip/||"`;; \
+ *) f=$$p;; \
+ esac;
+am__strip_dir = f=`echo $$p | sed -e 's|^.*/||'`;
+am__install_max = 40
+am__nobase_strip_setup = \
+ srcdirstrip=`echo "$(srcdir)" | sed 's/[].[^$$\\*|]/\\\\&/g'`
+am__nobase_strip = \
+ for p in $$list; do echo "$$p"; done | sed -e "s|$$srcdirstrip/||"
+am__nobase_list = $(am__nobase_strip_setup); \
+ for p in $$list; do echo "$$p $$p"; done | \
+ sed "s| $$srcdirstrip/| |;"' / .*\//!s/ .*/ ./; s,\( .*\)/[^/]*$$,\1,' | \
+ $(AWK) 'BEGIN { files["."] = "" } { files[$$2] = files[$$2] " " $$1; \
+ if (++n[$$2] == $(am__install_max)) \
+ { print $$2, files[$$2]; n[$$2] = 0; files[$$2] = "" } } \
+ END { for (dir in files) print dir, files[dir] }'
+am__base_list = \
+ sed '$$!N;$$!N;$$!N;$$!N;$$!N;$$!N;$$!N;s/\n/ /g' | \
+ sed '$$!N;$$!N;$$!N;$$!N;s/\n/ /g'
+am__installdirs = "$(DESTDIR)$(libdir)" "$(DESTDIR)$(docdir)" \
+ "$(DESTDIR)$(pkgconfigdir)"
+LTLIBRARIES = $(lib_LTLIBRARIES)
+liblzma_la_LIBADD =
+am__liblzma_la_SOURCES_DIST = common/common.c common/common.h \
+ common/bsr.h common/block_util.c common/easy_preset.c \
+ common/easy_preset.h common/filter_common.c \
+ common/filter_common.h common/index.c common/index.h \
+ common/stream_flags_common.c common/stream_flags_common.h \
+ common/vli_size.c common/alone_encoder.c \
+ common/block_buffer_encoder.c common/block_encoder.c \
+ common/block_encoder.h common/block_header_encoder.c \
+ common/easy_buffer_encoder.c common/easy_encoder.c \
+ common/easy_encoder_memusage.c common/filter_buffer_encoder.c \
+ common/filter_encoder.c common/filter_encoder.h \
+ common/filter_flags_encoder.c common/index_encoder.c \
+ common/index_encoder.h common/stream_buffer_encoder.c \
+ common/stream_encoder.c common/stream_encoder.h \
+ common/stream_flags_encoder.c common/vli_encoder.c \
+ common/alone_decoder.c common/alone_decoder.h \
+ common/auto_decoder.c common/block_buffer_decoder.c \
+ common/block_decoder.c common/block_decoder.h \
+ common/block_header_decoder.c common/easy_decoder_memusage.c \
+ common/filter_buffer_decoder.c common/filter_decoder.c \
+ common/filter_decoder.h common/filter_flags_decoder.c \
+ common/index_decoder.c common/index_hash.c \
+ common/stream_buffer_decoder.c common/stream_decoder.c \
+ common/stream_decoder.h common/stream_flags_decoder.c \
+ common/vli_decoder.c check/check.c check/check.h \
+ check/crc_macros.h check/crc32_small.c check/crc32_table.c \
+ check/crc32_table_le.h check/crc32_table_be.h \
+ check/crc32_x86.S check/crc32_fast.c check/crc64_small.c \
+ check/crc64_table.c check/crc64_table_le.h \
+ check/crc64_table_be.h check/crc64_x86.S check/crc64_fast.c \
+ check/sha256.c lz/lz_encoder.c lz/lz_encoder.h \
+ lz/lz_encoder_hash.h lz/lz_encoder_mf.c lz/lz_decoder.c \
+ lz/lz_decoder.h lzma/lzma_common.h lzma/fastpos.h \
+ lzma/lzma_encoder.h lzma/lzma_encoder.c \
+ lzma/lzma_encoder_presets.c lzma/lzma_encoder_private.h \
+ lzma/lzma_encoder_optimum_fast.c \
+ lzma/lzma_encoder_optimum_normal.c lzma/fastpos_table.c \
+ lzma/lzma_decoder.c lzma/lzma_decoder.h lzma/lzma2_encoder.c \
+ lzma/lzma2_encoder.h lzma/lzma2_decoder.c lzma/lzma2_decoder.h \
+ rangecoder/range_common.h rangecoder/range_encoder.h \
+ rangecoder/price.h rangecoder/price_table.c \
+ rangecoder/range_decoder.h subblock/subblock_encoder.c \
+ subblock/subblock_encoder.h subblock/subblock_decoder.c \
+ subblock/subblock_decoder.h subblock/subblock_decoder_helper.c \
+ subblock/subblock_decoder_helper.h delta/delta_common.c \
+ delta/delta_common.h delta/delta_private.h \
+ delta/delta_encoder.c delta/delta_encoder.h \
+ delta/delta_decoder.c delta/delta_decoder.h \
+ simple/simple_coder.c simple/simple_coder.h \
+ simple/simple_private.h simple/simple_encoder.c \
+ simple/simple_encoder.h simple/simple_decoder.c \
+ simple/simple_decoder.h simple/x86.c simple/powerpc.c \
+ simple/ia64.c simple/arm.c simple/armthumb.c simple/sparc.c \
+ liblzma_w32res.rc
+@COND_MAIN_ENCODER_TRUE@am__objects_1 = liblzma_la-alone_encoder.lo \
+@COND_MAIN_ENCODER_TRUE@ liblzma_la-block_buffer_encoder.lo \
+@COND_MAIN_ENCODER_TRUE@ liblzma_la-block_encoder.lo \
+@COND_MAIN_ENCODER_TRUE@ liblzma_la-block_header_encoder.lo \
+@COND_MAIN_ENCODER_TRUE@ liblzma_la-easy_buffer_encoder.lo \
+@COND_MAIN_ENCODER_TRUE@ liblzma_la-easy_encoder.lo \
+@COND_MAIN_ENCODER_TRUE@ liblzma_la-easy_encoder_memusage.lo \
+@COND_MAIN_ENCODER_TRUE@ liblzma_la-filter_buffer_encoder.lo \
+@COND_MAIN_ENCODER_TRUE@ liblzma_la-filter_encoder.lo \
+@COND_MAIN_ENCODER_TRUE@ liblzma_la-filter_flags_encoder.lo \
+@COND_MAIN_ENCODER_TRUE@ liblzma_la-index_encoder.lo \
+@COND_MAIN_ENCODER_TRUE@ liblzma_la-stream_buffer_encoder.lo \
+@COND_MAIN_ENCODER_TRUE@ liblzma_la-stream_encoder.lo \
+@COND_MAIN_ENCODER_TRUE@ liblzma_la-stream_flags_encoder.lo \
+@COND_MAIN_ENCODER_TRUE@ liblzma_la-vli_encoder.lo
+@COND_MAIN_DECODER_TRUE@am__objects_2 = liblzma_la-alone_decoder.lo \
+@COND_MAIN_DECODER_TRUE@ liblzma_la-auto_decoder.lo \
+@COND_MAIN_DECODER_TRUE@ liblzma_la-block_buffer_decoder.lo \
+@COND_MAIN_DECODER_TRUE@ liblzma_la-block_decoder.lo \
+@COND_MAIN_DECODER_TRUE@ liblzma_la-block_header_decoder.lo \
+@COND_MAIN_DECODER_TRUE@ liblzma_la-easy_decoder_memusage.lo \
+@COND_MAIN_DECODER_TRUE@ liblzma_la-filter_buffer_decoder.lo \
+@COND_MAIN_DECODER_TRUE@ liblzma_la-filter_decoder.lo \
+@COND_MAIN_DECODER_TRUE@ liblzma_la-filter_flags_decoder.lo \
+@COND_MAIN_DECODER_TRUE@ liblzma_la-index_decoder.lo \
+@COND_MAIN_DECODER_TRUE@ liblzma_la-index_hash.lo \
+@COND_MAIN_DECODER_TRUE@ liblzma_la-stream_buffer_decoder.lo \
+@COND_MAIN_DECODER_TRUE@ liblzma_la-stream_decoder.lo \
+@COND_MAIN_DECODER_TRUE@ liblzma_la-stream_flags_decoder.lo \
+@COND_MAIN_DECODER_TRUE@ liblzma_la-vli_decoder.lo
+@COND_CHECK_CRC32_TRUE@@COND_SMALL_TRUE@am__objects_3 = liblzma_la-crc32_small.lo
+@COND_CHECK_CRC32_TRUE@@COND_SMALL_FALSE@am__objects_4 = liblzma_la-crc32_table.lo
+@COND_ASM_X86_TRUE@@COND_CHECK_CRC32_TRUE@@COND_SMALL_FALSE@am__objects_5 = liblzma_la-crc32_x86.lo
+@COND_ASM_X86_FALSE@@COND_CHECK_CRC32_TRUE@@COND_SMALL_FALSE@am__objects_6 = liblzma_la-crc32_fast.lo
+@COND_CHECK_CRC64_TRUE@@COND_SMALL_TRUE@am__objects_7 = liblzma_la-crc64_small.lo
+@COND_CHECK_CRC64_TRUE@@COND_SMALL_FALSE@am__objects_8 = liblzma_la-crc64_table.lo
+@COND_ASM_X86_TRUE@@COND_CHECK_CRC64_TRUE@@COND_SMALL_FALSE@am__objects_9 = liblzma_la-crc64_x86.lo
+@COND_ASM_X86_FALSE@@COND_CHECK_CRC64_TRUE@@COND_SMALL_FALSE@am__objects_10 = liblzma_la-crc64_fast.lo
+@COND_CHECK_SHA256_TRUE@am__objects_11 = liblzma_la-sha256.lo
+@COND_ENCODER_LZ_TRUE@@COND_FILTER_LZ_TRUE@am__objects_12 = liblzma_la-lz_encoder.lo \
+@COND_ENCODER_LZ_TRUE@@COND_FILTER_LZ_TRUE@ liblzma_la-lz_encoder_mf.lo
+@COND_DECODER_LZ_TRUE@@COND_FILTER_LZ_TRUE@am__objects_13 = liblzma_la-lz_decoder.lo
+am__objects_14 =
+@COND_ENCODER_LZMA1_TRUE@@COND_FILTER_LZMA1_TRUE@am__objects_15 = liblzma_la-lzma_encoder.lo \
+@COND_ENCODER_LZMA1_TRUE@@COND_FILTER_LZMA1_TRUE@ liblzma_la-lzma_encoder_presets.lo \
+@COND_ENCODER_LZMA1_TRUE@@COND_FILTER_LZMA1_TRUE@ liblzma_la-lzma_encoder_optimum_fast.lo \
+@COND_ENCODER_LZMA1_TRUE@@COND_FILTER_LZMA1_TRUE@ liblzma_la-lzma_encoder_optimum_normal.lo
+@COND_ENCODER_LZMA1_TRUE@@COND_FILTER_LZMA1_TRUE@@COND_SMALL_FALSE@am__objects_16 = liblzma_la-fastpos_table.lo
+@COND_DECODER_LZMA1_TRUE@@COND_FILTER_LZMA1_TRUE@am__objects_17 = liblzma_la-lzma_decoder.lo
+@COND_ENCODER_LZMA2_TRUE@@COND_FILTER_LZMA1_TRUE@am__objects_18 = liblzma_la-lzma2_encoder.lo
+@COND_DECODER_LZMA2_TRUE@@COND_FILTER_LZMA1_TRUE@am__objects_19 = liblzma_la-lzma2_decoder.lo
+@COND_ENCODER_LZMA1_TRUE@@COND_FILTER_LZMA1_TRUE@am__objects_20 = liblzma_la-price_table.lo
+@COND_ENCODER_SUBBLOCK_TRUE@@COND_FILTER_SUBBLOCK_TRUE@am__objects_21 = liblzma_la-subblock_encoder.lo
+@COND_DECODER_SUBBLOCK_TRUE@@COND_FILTER_SUBBLOCK_TRUE@am__objects_22 = liblzma_la-subblock_decoder.lo \
+@COND_DECODER_SUBBLOCK_TRUE@@COND_FILTER_SUBBLOCK_TRUE@ liblzma_la-subblock_decoder_helper.lo
+@COND_FILTER_DELTA_TRUE@am__objects_23 = liblzma_la-delta_common.lo
+@COND_ENCODER_DELTA_TRUE@@COND_FILTER_DELTA_TRUE@am__objects_24 = liblzma_la-delta_encoder.lo
+@COND_DECODER_DELTA_TRUE@@COND_FILTER_DELTA_TRUE@am__objects_25 = liblzma_la-delta_decoder.lo
+@COND_FILTER_SIMPLE_TRUE@am__objects_26 = liblzma_la-simple_coder.lo
+@COND_ENCODER_SIMPLE_TRUE@@COND_FILTER_SIMPLE_TRUE@am__objects_27 = liblzma_la-simple_encoder.lo
+@COND_DECODER_SIMPLE_TRUE@@COND_FILTER_SIMPLE_TRUE@am__objects_28 = liblzma_la-simple_decoder.lo
+@COND_FILTER_SIMPLE_TRUE@@COND_FILTER_X86_TRUE@am__objects_29 = liblzma_la-x86.lo
+@COND_FILTER_POWERPC_TRUE@@COND_FILTER_SIMPLE_TRUE@am__objects_30 = liblzma_la-powerpc.lo
+@COND_FILTER_IA64_TRUE@@COND_FILTER_SIMPLE_TRUE@am__objects_31 = liblzma_la-ia64.lo
+@COND_FILTER_ARM_TRUE@@COND_FILTER_SIMPLE_TRUE@am__objects_32 = liblzma_la-arm.lo
+@COND_FILTER_ARMTHUMB_TRUE@@COND_FILTER_SIMPLE_TRUE@am__objects_33 = liblzma_la-armthumb.lo
+@COND_FILTER_SIMPLE_TRUE@@COND_FILTER_SPARC_TRUE@am__objects_34 = liblzma_la-sparc.lo
+@COND_W32_TRUE@am__objects_35 = liblzma_w32res.lo
+am_liblzma_la_OBJECTS = liblzma_la-common.lo liblzma_la-block_util.lo \
+ liblzma_la-easy_preset.lo liblzma_la-filter_common.lo \
+ liblzma_la-index.lo liblzma_la-stream_flags_common.lo \
+ liblzma_la-vli_size.lo $(am__objects_1) $(am__objects_2) \
+ liblzma_la-check.lo $(am__objects_3) $(am__objects_4) \
+ $(am__objects_5) $(am__objects_6) $(am__objects_7) \
+ $(am__objects_8) $(am__objects_9) $(am__objects_10) \
+ $(am__objects_11) $(am__objects_12) $(am__objects_13) \
+ $(am__objects_14) $(am__objects_15) $(am__objects_16) \
+ $(am__objects_17) $(am__objects_18) $(am__objects_19) \
+ $(am__objects_14) $(am__objects_20) $(am__objects_14) \
+ $(am__objects_21) $(am__objects_22) $(am__objects_23) \
+ $(am__objects_24) $(am__objects_25) $(am__objects_26) \
+ $(am__objects_27) $(am__objects_28) $(am__objects_29) \
+ $(am__objects_30) $(am__objects_31) $(am__objects_32) \
+ $(am__objects_33) $(am__objects_34) $(am__objects_35)
+liblzma_la_OBJECTS = $(am_liblzma_la_OBJECTS)
+liblzma_la_LINK = $(LIBTOOL) --tag=CC $(AM_LIBTOOLFLAGS) \
+ $(LIBTOOLFLAGS) --mode=link $(CCLD) $(AM_CFLAGS) $(CFLAGS) \
+ $(liblzma_la_LDFLAGS) $(LDFLAGS) -o $@
+DEFAULT_INCLUDES = -I.@am__isrc@ -I$(top_builddir)
+depcomp = $(SHELL) $(top_srcdir)/build-aux/depcomp
+am__depfiles_maybe = depfiles
+am__mv = mv -f
+CPPASCOMPILE = $(CCAS) $(DEFS) $(DEFAULT_INCLUDES) $(INCLUDES) \
+ $(AM_CPPFLAGS) $(CPPFLAGS) $(AM_CCASFLAGS) $(CCASFLAGS)
+LTCPPASCOMPILE = $(LIBTOOL) $(AM_LIBTOOLFLAGS) $(LIBTOOLFLAGS) \
+ --mode=compile $(CCAS) $(DEFS) $(DEFAULT_INCLUDES) $(INCLUDES) \
+ $(AM_CPPFLAGS) $(CPPFLAGS) $(AM_CCASFLAGS) $(CCASFLAGS)
+COMPILE = $(CC) $(DEFS) $(DEFAULT_INCLUDES) $(INCLUDES) $(AM_CPPFLAGS) \
+ $(CPPFLAGS) $(AM_CFLAGS) $(CFLAGS)
+LTCOMPILE = $(LIBTOOL) --tag=CC $(AM_LIBTOOLFLAGS) $(LIBTOOLFLAGS) \
+ --mode=compile $(CC) $(DEFS) $(DEFAULT_INCLUDES) $(INCLUDES) \
+ $(AM_CPPFLAGS) $(CPPFLAGS) $(AM_CFLAGS) $(CFLAGS)
+CCLD = $(CC)
+LINK = $(LIBTOOL) --tag=CC $(AM_LIBTOOLFLAGS) $(LIBTOOLFLAGS) \
+ --mode=link $(CCLD) $(AM_CFLAGS) $(CFLAGS) $(AM_LDFLAGS) \
+ $(LDFLAGS) -o $@
+SOURCES = $(liblzma_la_SOURCES)
+DIST_SOURCES = $(am__liblzma_la_SOURCES_DIST)
+RECURSIVE_TARGETS = all-recursive check-recursive dvi-recursive \
+ html-recursive info-recursive install-data-recursive \
+ install-dvi-recursive install-exec-recursive \
+ install-html-recursive install-info-recursive \
+ install-pdf-recursive install-ps-recursive install-recursive \
+ installcheck-recursive installdirs-recursive pdf-recursive \
+ ps-recursive uninstall-recursive
+DATA = $(doc_DATA) $(pkgconfig_DATA)
+RECURSIVE_CLEAN_TARGETS = mostlyclean-recursive clean-recursive \
+ distclean-recursive maintainer-clean-recursive
+AM_RECURSIVE_TARGETS = $(RECURSIVE_TARGETS:-recursive=) \
+ $(RECURSIVE_CLEAN_TARGETS:-recursive=) tags TAGS ctags CTAGS \
+ distdir
+ETAGS = etags
+CTAGS = ctags
+DIST_SUBDIRS = $(SUBDIRS)
+DISTFILES = $(DIST_COMMON) $(DIST_SOURCES) $(TEXINFOS) $(EXTRA_DIST)
+am__relativize = \
+ dir0=`pwd`; \
+ sed_first='s,^\([^/]*\)/.*$$,\1,'; \
+ sed_rest='s,^[^/]*/*,,'; \
+ sed_last='s,^.*/\([^/]*\)$$,\1,'; \
+ sed_butlast='s,/*[^/]*$$,,'; \
+ while test -n "$$dir1"; do \
+ first=`echo "$$dir1" | sed -e "$$sed_first"`; \
+ if test "$$first" != "."; then \
+ if test "$$first" = ".."; then \
+ dir2=`echo "$$dir0" | sed -e "$$sed_last"`/"$$dir2"; \
+ dir0=`echo "$$dir0" | sed -e "$$sed_butlast"`; \
+ else \
+ first2=`echo "$$dir2" | sed -e "$$sed_first"`; \
+ if test "$$first2" = "$$first"; then \
+ dir2=`echo "$$dir2" | sed -e "$$sed_rest"`; \
+ else \
+ dir2="../$$dir2"; \
+ fi; \
+ dir0="$$dir0"/"$$first"; \
+ fi; \
+ fi; \
+ dir1=`echo "$$dir1" | sed -e "$$sed_rest"`; \
+ done; \
+ reldir="$$dir2"
+ACLOCAL = @ACLOCAL@
+AMTAR = @AMTAR@
+AM_CFLAGS = @AM_CFLAGS@
+AR = @AR@
+AS = @AS@
+AUTOCONF = @AUTOCONF@
+AUTOHEADER = @AUTOHEADER@
+AUTOMAKE = @AUTOMAKE@
+AWK = @AWK@
+CC = @CC@
+CCAS = @CCAS@
+CCASDEPMODE = @CCASDEPMODE@
+CCASFLAGS = @CCASFLAGS@
+CCDEPMODE = @CCDEPMODE@
+CFLAGS = @CFLAGS@
+CFLAG_VISIBILITY = @CFLAG_VISIBILITY@
+CPP = @CPP@
+CPPFLAGS = @CPPFLAGS@
+CYGPATH_W = @CYGPATH_W@
+DEFS = @DEFS@
+DEPDIR = @DEPDIR@
+DLLTOOL = @DLLTOOL@
+DSYMUTIL = @DSYMUTIL@
+DUMPBIN = @DUMPBIN@
+DYNAMIC_CPPFLAGS = @DYNAMIC_CPPFLAGS@
+DYNAMIC_LDFLAGS = @DYNAMIC_LDFLAGS@
+ECHO_C = @ECHO_C@
+ECHO_N = @ECHO_N@
+ECHO_T = @ECHO_T@
+EGREP = @EGREP@
+EXEEXT = @EXEEXT@
+FGREP = @FGREP@
+GETOPT_H = @GETOPT_H@
+GMSGFMT = @GMSGFMT@
+GMSGFMT_015 = @GMSGFMT_015@
+GREP = @GREP@
+HAVE_VISIBILITY = @HAVE_VISIBILITY@
+INSTALL = @INSTALL@
+INSTALL_DATA = @INSTALL_DATA@
+INSTALL_PROGRAM = @INSTALL_PROGRAM@
+INSTALL_SCRIPT = @INSTALL_SCRIPT@
+INSTALL_STRIP_PROGRAM = @INSTALL_STRIP_PROGRAM@
+INTLLIBS = @INTLLIBS@
+INTL_MACOSX_LIBS = @INTL_MACOSX_LIBS@
+LD = @LD@
+LDFLAGS = @LDFLAGS@
+LIBICONV = @LIBICONV@
+LIBINTL = @LIBINTL@
+LIBOBJS = @LIBOBJS@
+LIBS = @LIBS@
+LIBTOOL = @LIBTOOL@
+LIPO = @LIPO@
+LN_S = @LN_S@
+LTLIBICONV = @LTLIBICONV@
+LTLIBINTL = @LTLIBINTL@
+LTLIBOBJS = @LTLIBOBJS@
+MAKEINFO = @MAKEINFO@
+MKDIR_P = @MKDIR_P@
+MSGFMT = @MSGFMT@
+MSGFMT_015 = @MSGFMT_015@
+MSGMERGE = @MSGMERGE@
+NM = @NM@
+NMEDIT = @NMEDIT@
+OBJDUMP = @OBJDUMP@
+OBJEXT = @OBJEXT@
+OTOOL = @OTOOL@
+OTOOL64 = @OTOOL64@
+PACKAGE = @PACKAGE@
+PACKAGE_BUGREPORT = @PACKAGE_BUGREPORT@
+PACKAGE_HOMEPAGE = @PACKAGE_HOMEPAGE@
+PACKAGE_NAME = @PACKAGE_NAME@
+PACKAGE_STRING = @PACKAGE_STRING@
+PACKAGE_TARNAME = @PACKAGE_TARNAME@
+PACKAGE_URL = @PACKAGE_URL@
+PACKAGE_VERSION = @PACKAGE_VERSION@
+PATH_SEPARATOR = @PATH_SEPARATOR@
+POSIX_SHELL = @POSIX_SHELL@
+POSUB = @POSUB@
+PREFERABLY_POSIX_SHELL = @PREFERABLY_POSIX_SHELL@
+PTHREAD_CC = @PTHREAD_CC@
+PTHREAD_CFLAGS = @PTHREAD_CFLAGS@
+PTHREAD_LIBS = @PTHREAD_LIBS@
+RANLIB = @RANLIB@
+RC = @RC@
+SED = @SED@
+SET_MAKE = @SET_MAKE@
+SHELL = @SHELL@
+STATIC_CPPFLAGS = @STATIC_CPPFLAGS@
+STATIC_LDFLAGS = @STATIC_LDFLAGS@
+STRIP = @STRIP@
+USE_NLS = @USE_NLS@
+VERSION = @VERSION@
+XGETTEXT = @XGETTEXT@
+XGETTEXT_015 = @XGETTEXT_015@
+abs_builddir = @abs_builddir@
+abs_srcdir = @abs_srcdir@
+abs_top_builddir = @abs_top_builddir@
+abs_top_srcdir = @abs_top_srcdir@
+ac_ct_CC = @ac_ct_CC@
+ac_ct_DUMPBIN = @ac_ct_DUMPBIN@
+acx_pthread_config = @acx_pthread_config@
+am__include = @am__include@
+am__leading_dot = @am__leading_dot@
+am__quote = @am__quote@
+am__tar = @am__tar@
+am__untar = @am__untar@
+bindir = @bindir@
+build = @build@
+build_alias = @build_alias@
+build_cpu = @build_cpu@
+build_os = @build_os@
+build_vendor = @build_vendor@
+builddir = @builddir@
+datadir = @datadir@
+datarootdir = @datarootdir@
+docdir = @docdir@
+dvidir = @dvidir@
+exec_prefix = @exec_prefix@
+host = @host@
+host_alias = @host_alias@
+host_cpu = @host_cpu@
+host_os = @host_os@
+host_vendor = @host_vendor@
+htmldir = @htmldir@
+includedir = @includedir@
+infodir = @infodir@
+install_sh = @install_sh@
+libdir = @libdir@
+libexecdir = @libexecdir@
+localedir = @localedir@
+localstatedir = @localstatedir@
+lt_ECHO = @lt_ECHO@
+mandir = @mandir@
+mkdir_p = @mkdir_p@
+oldincludedir = @oldincludedir@
+pdfdir = @pdfdir@
+prefix = @prefix@
+program_transform_name = @program_transform_name@
+psdir = @psdir@
+sbindir = @sbindir@
+sharedstatedir = @sharedstatedir@
+srcdir = @srcdir@
+sysconfdir = @sysconfdir@
+target_alias = @target_alias@
+top_build_prefix = @top_build_prefix@
+top_builddir = @top_builddir@
+top_srcdir = @top_srcdir@
+xz = @xz@
+SUBDIRS = api
+EXTRA_DIST = check/crc32_tablegen.c check/crc64_tablegen.c \
+ $(am__append_14) liblzma.pc.in
+CLEANFILES = $(am__append_38)
+doc_DATA = $(am__append_41)
+lib_LTLIBRARIES = liblzma.la
+liblzma_la_SOURCES = common/common.c common/common.h common/bsr.h \
+ common/block_util.c common/easy_preset.c common/easy_preset.h \
+ common/filter_common.c common/filter_common.h common/index.c \
+ common/index.h common/stream_flags_common.c \
+ common/stream_flags_common.h common/vli_size.c $(am__append_1) \
+ $(am__append_2) check/check.c check/check.h check/crc_macros.h \
+ $(am__append_3) $(am__append_4) $(am__append_5) \
+ $(am__append_6) $(am__append_7) $(am__append_8) \
+ $(am__append_9) $(am__append_10) $(am__append_11) \
+ $(am__append_12) $(am__append_13) $(am__append_15) \
+ $(am__append_16) $(am__append_17) $(am__append_18) \
+ $(am__append_19) $(am__append_20) $(am__append_21) \
+ $(am__append_22) $(am__append_23) $(am__append_24) \
+ $(am__append_25) $(am__append_26) $(am__append_27) \
+ $(am__append_28) $(am__append_29) $(am__append_30) \
+ $(am__append_31) $(am__append_32) $(am__append_33) \
+ $(am__append_34) $(am__append_35) $(am__append_36) \
+ $(am__append_37) $(am__append_39)
+liblzma_la_CPPFLAGS = \
+ -I$(top_srcdir)/src/liblzma/api \
+ -I$(top_srcdir)/src/liblzma/common \
+ -I$(top_srcdir)/src/liblzma/check \
+ -I$(top_srcdir)/src/liblzma/lz \
+ -I$(top_srcdir)/src/liblzma/rangecoder \
+ -I$(top_srcdir)/src/liblzma/lzma \
+ -I$(top_srcdir)/src/liblzma/subblock \
+ -I$(top_srcdir)/src/liblzma/delta \
+ -I$(top_srcdir)/src/liblzma/simple \
+ -I$(top_srcdir)/src/common
+
+liblzma_la_LDFLAGS = -no-undefined -version-info 0:0:0 \
+ $(am__append_40)
+pkgconfigdir = $(libdir)/pkgconfig
+pkgconfig_DATA = liblzma.pc
+all: all-recursive
+
+.SUFFIXES:
+.SUFFIXES: .S .c .lo .o .obj .rc
+$(srcdir)/Makefile.in: $(srcdir)/Makefile.am $(srcdir)/common/Makefile.inc $(srcdir)/check/Makefile.inc $(srcdir)/lz/Makefile.inc $(srcdir)/lzma/Makefile.inc $(srcdir)/rangecoder/Makefile.inc $(srcdir)/subblock/Makefile.inc $(srcdir)/delta/Makefile.inc $(srcdir)/simple/Makefile.inc $(am__configure_deps)
+ @for dep in $?; do \
+ case '$(am__configure_deps)' in \
+ *$$dep*) \
+ ( cd $(top_builddir) && $(MAKE) $(AM_MAKEFLAGS) am--refresh ) \
+ && { if test -f $@; then exit 0; else break; fi; }; \
+ exit 1;; \
+ esac; \
+ done; \
+ echo ' cd $(top_srcdir) && $(AUTOMAKE) --foreign src/liblzma/Makefile'; \
+ $(am__cd) $(top_srcdir) && \
+ $(AUTOMAKE) --foreign src/liblzma/Makefile
+.PRECIOUS: Makefile
+Makefile: $(srcdir)/Makefile.in $(top_builddir)/config.status
+ @case '$?' in \
+ *config.status*) \
+ cd $(top_builddir) && $(MAKE) $(AM_MAKEFLAGS) am--refresh;; \
+ *) \
+ echo ' cd $(top_builddir) && $(SHELL) ./config.status $(subdir)/$@ $(am__depfiles_maybe)'; \
+ cd $(top_builddir) && $(SHELL) ./config.status $(subdir)/$@ $(am__depfiles_maybe);; \
+ esac;
+
+$(top_builddir)/config.status: $(top_srcdir)/configure $(CONFIG_STATUS_DEPENDENCIES)
+ cd $(top_builddir) && $(MAKE) $(AM_MAKEFLAGS) am--refresh
+
+$(top_srcdir)/configure: $(am__configure_deps)
+ cd $(top_builddir) && $(MAKE) $(AM_MAKEFLAGS) am--refresh
+$(ACLOCAL_M4): $(am__aclocal_m4_deps)
+ cd $(top_builddir) && $(MAKE) $(AM_MAKEFLAGS) am--refresh
+$(am__aclocal_m4_deps):
+liblzma.pc: $(top_builddir)/config.status $(srcdir)/liblzma.pc.in
+ cd $(top_builddir) && $(SHELL) ./config.status $(subdir)/$@
+install-libLTLIBRARIES: $(lib_LTLIBRARIES)
+ @$(NORMAL_INSTALL)
+ test -z "$(libdir)" || $(MKDIR_P) "$(DESTDIR)$(libdir)"
+ @list='$(lib_LTLIBRARIES)'; test -n "$(libdir)" || list=; \
+ list2=; for p in $$list; do \
+ if test -f $$p; then \
+ list2="$$list2 $$p"; \
+ else :; fi; \
+ done; \
+ test -z "$$list2" || { \
+ echo " $(LIBTOOL) $(AM_LIBTOOLFLAGS) $(LIBTOOLFLAGS) --mode=install $(INSTALL) $(INSTALL_STRIP_FLAG) $$list2 '$(DESTDIR)$(libdir)'"; \
+ $(LIBTOOL) $(AM_LIBTOOLFLAGS) $(LIBTOOLFLAGS) --mode=install $(INSTALL) $(INSTALL_STRIP_FLAG) $$list2 "$(DESTDIR)$(libdir)"; \
+ }
+
+uninstall-libLTLIBRARIES:
+ @$(NORMAL_UNINSTALL)
+ @list='$(lib_LTLIBRARIES)'; test -n "$(libdir)" || list=; \
+ for p in $$list; do \
+ $(am__strip_dir) \
+ echo " $(LIBTOOL) $(AM_LIBTOOLFLAGS) $(LIBTOOLFLAGS) --mode=uninstall rm -f '$(DESTDIR)$(libdir)/$$f'"; \
+ $(LIBTOOL) $(AM_LIBTOOLFLAGS) $(LIBTOOLFLAGS) --mode=uninstall rm -f "$(DESTDIR)$(libdir)/$$f"; \
+ done
+
+clean-libLTLIBRARIES:
+ -test -z "$(lib_LTLIBRARIES)" || rm -f $(lib_LTLIBRARIES)
+ @list='$(lib_LTLIBRARIES)'; for p in $$list; do \
+ dir="`echo $$p | sed -e 's|/[^/]*$$||'`"; \
+ test "$$dir" != "$$p" || dir=.; \
+ echo "rm -f \"$${dir}/so_locations\""; \
+ rm -f "$${dir}/so_locations"; \
+ done
+liblzma.la: $(liblzma_la_OBJECTS) $(liblzma_la_DEPENDENCIES)
+ $(liblzma_la_LINK) -rpath $(libdir) $(liblzma_la_OBJECTS) $(liblzma_la_LIBADD) $(LIBS)
+
+mostlyclean-compile:
+ -rm -f *.$(OBJEXT)
+
+distclean-compile:
+ -rm -f *.tab.c
+
+@AMDEP_TRUE@@am__include@ @am__quote@./$(DEPDIR)/liblzma_la-alone_decoder.Plo@am__quote@
+@AMDEP_TRUE@@am__include@ @am__quote@./$(DEPDIR)/liblzma_la-alone_encoder.Plo@am__quote@
+@AMDEP_TRUE@@am__include@ @am__quote@./$(DEPDIR)/liblzma_la-arm.Plo@am__quote@
+@AMDEP_TRUE@@am__include@ @am__quote@./$(DEPDIR)/liblzma_la-armthumb.Plo@am__quote@
+@AMDEP_TRUE@@am__include@ @am__quote@./$(DEPDIR)/liblzma_la-auto_decoder.Plo@am__quote@
+@AMDEP_TRUE@@am__include@ @am__quote@./$(DEPDIR)/liblzma_la-block_buffer_decoder.Plo@am__quote@
+@AMDEP_TRUE@@am__include@ @am__quote@./$(DEPDIR)/liblzma_la-block_buffer_encoder.Plo@am__quote@
+@AMDEP_TRUE@@am__include@ @am__quote@./$(DEPDIR)/liblzma_la-block_decoder.Plo@am__quote@
+@AMDEP_TRUE@@am__include@ @am__quote@./$(DEPDIR)/liblzma_la-block_encoder.Plo@am__quote@
+@AMDEP_TRUE@@am__include@ @am__quote@./$(DEPDIR)/liblzma_la-block_header_decoder.Plo@am__quote@
+@AMDEP_TRUE@@am__include@ @am__quote@./$(DEPDIR)/liblzma_la-block_header_encoder.Plo@am__quote@
+@AMDEP_TRUE@@am__include@ @am__quote@./$(DEPDIR)/liblzma_la-block_util.Plo@am__quote@
+@AMDEP_TRUE@@am__include@ @am__quote@./$(DEPDIR)/liblzma_la-check.Plo@am__quote@
+@AMDEP_TRUE@@am__include@ @am__quote@./$(DEPDIR)/liblzma_la-common.Plo@am__quote@
+@AMDEP_TRUE@@am__include@ @am__quote@./$(DEPDIR)/liblzma_la-crc32_fast.Plo@am__quote@
+@AMDEP_TRUE@@am__include@ @am__quote@./$(DEPDIR)/liblzma_la-crc32_small.Plo@am__quote@
+@AMDEP_TRUE@@am__include@ @am__quote@./$(DEPDIR)/liblzma_la-crc32_table.Plo@am__quote@
+@AMDEP_TRUE@@am__include@ @am__quote@./$(DEPDIR)/liblzma_la-crc32_x86.Plo@am__quote@
+@AMDEP_TRUE@@am__include@ @am__quote@./$(DEPDIR)/liblzma_la-crc64_fast.Plo@am__quote@
+@AMDEP_TRUE@@am__include@ @am__quote@./$(DEPDIR)/liblzma_la-crc64_small.Plo@am__quote@
+@AMDEP_TRUE@@am__include@ @am__quote@./$(DEPDIR)/liblzma_la-crc64_table.Plo@am__quote@
+@AMDEP_TRUE@@am__include@ @am__quote@./$(DEPDIR)/liblzma_la-crc64_x86.Plo@am__quote@
+@AMDEP_TRUE@@am__include@ @am__quote@./$(DEPDIR)/liblzma_la-delta_common.Plo@am__quote@
+@AMDEP_TRUE@@am__include@ @am__quote@./$(DEPDIR)/liblzma_la-delta_decoder.Plo@am__quote@
+@AMDEP_TRUE@@am__include@ @am__quote@./$(DEPDIR)/liblzma_la-delta_encoder.Plo@am__quote@
+@AMDEP_TRUE@@am__include@ @am__quote@./$(DEPDIR)/liblzma_la-easy_buffer_encoder.Plo@am__quote@
+@AMDEP_TRUE@@am__include@ @am__quote@./$(DEPDIR)/liblzma_la-easy_decoder_memusage.Plo@am__quote@
+@AMDEP_TRUE@@am__include@ @am__quote@./$(DEPDIR)/liblzma_la-easy_encoder.Plo@am__quote@
+@AMDEP_TRUE@@am__include@ @am__quote@./$(DEPDIR)/liblzma_la-easy_encoder_memusage.Plo@am__quote@
+@AMDEP_TRUE@@am__include@ @am__quote@./$(DEPDIR)/liblzma_la-easy_preset.Plo@am__quote@
+@AMDEP_TRUE@@am__include@ @am__quote@./$(DEPDIR)/liblzma_la-fastpos_table.Plo@am__quote@
+@AMDEP_TRUE@@am__include@ @am__quote@./$(DEPDIR)/liblzma_la-filter_buffer_decoder.Plo@am__quote@
+@AMDEP_TRUE@@am__include@ @am__quote@./$(DEPDIR)/liblzma_la-filter_buffer_encoder.Plo@am__quote@
+@AMDEP_TRUE@@am__include@ @am__quote@./$(DEPDIR)/liblzma_la-filter_common.Plo@am__quote@
+@AMDEP_TRUE@@am__include@ @am__quote@./$(DEPDIR)/liblzma_la-filter_decoder.Plo@am__quote@
+@AMDEP_TRUE@@am__include@ @am__quote@./$(DEPDIR)/liblzma_la-filter_encoder.Plo@am__quote@
+@AMDEP_TRUE@@am__include@ @am__quote@./$(DEPDIR)/liblzma_la-filter_flags_decoder.Plo@am__quote@
+@AMDEP_TRUE@@am__include@ @am__quote@./$(DEPDIR)/liblzma_la-filter_flags_encoder.Plo@am__quote@
+@AMDEP_TRUE@@am__include@ @am__quote@./$(DEPDIR)/liblzma_la-ia64.Plo@am__quote@
+@AMDEP_TRUE@@am__include@ @am__quote@./$(DEPDIR)/liblzma_la-index.Plo@am__quote@
+@AMDEP_TRUE@@am__include@ @am__quote@./$(DEPDIR)/liblzma_la-index_decoder.Plo@am__quote@
+@AMDEP_TRUE@@am__include@ @am__quote@./$(DEPDIR)/liblzma_la-index_encoder.Plo@am__quote@
+@AMDEP_TRUE@@am__include@ @am__quote@./$(DEPDIR)/liblzma_la-index_hash.Plo@am__quote@
+@AMDEP_TRUE@@am__include@ @am__quote@./$(DEPDIR)/liblzma_la-lz_decoder.Plo@am__quote@
+@AMDEP_TRUE@@am__include@ @am__quote@./$(DEPDIR)/liblzma_la-lz_encoder.Plo@am__quote@
+@AMDEP_TRUE@@am__include@ @am__quote@./$(DEPDIR)/liblzma_la-lz_encoder_mf.Plo@am__quote@
+@AMDEP_TRUE@@am__include@ @am__quote@./$(DEPDIR)/liblzma_la-lzma2_decoder.Plo@am__quote@
+@AMDEP_TRUE@@am__include@ @am__quote@./$(DEPDIR)/liblzma_la-lzma2_encoder.Plo@am__quote@
+@AMDEP_TRUE@@am__include@ @am__quote@./$(DEPDIR)/liblzma_la-lzma_decoder.Plo@am__quote@
+@AMDEP_TRUE@@am__include@ @am__quote@./$(DEPDIR)/liblzma_la-lzma_encoder.Plo@am__quote@
+@AMDEP_TRUE@@am__include@ @am__quote@./$(DEPDIR)/liblzma_la-lzma_encoder_optimum_fast.Plo@am__quote@
+@AMDEP_TRUE@@am__include@ @am__quote@./$(DEPDIR)/liblzma_la-lzma_encoder_optimum_normal.Plo@am__quote@
+@AMDEP_TRUE@@am__include@ @am__quote@./$(DEPDIR)/liblzma_la-lzma_encoder_presets.Plo@am__quote@
+@AMDEP_TRUE@@am__include@ @am__quote@./$(DEPDIR)/liblzma_la-powerpc.Plo@am__quote@
+@AMDEP_TRUE@@am__include@ @am__quote@./$(DEPDIR)/liblzma_la-price_table.Plo@am__quote@
+@AMDEP_TRUE@@am__include@ @am__quote@./$(DEPDIR)/liblzma_la-sha256.Plo@am__quote@
+@AMDEP_TRUE@@am__include@ @am__quote@./$(DEPDIR)/liblzma_la-simple_coder.Plo@am__quote@
+@AMDEP_TRUE@@am__include@ @am__quote@./$(DEPDIR)/liblzma_la-simple_decoder.Plo@am__quote@
+@AMDEP_TRUE@@am__include@ @am__quote@./$(DEPDIR)/liblzma_la-simple_encoder.Plo@am__quote@
+@AMDEP_TRUE@@am__include@ @am__quote@./$(DEPDIR)/liblzma_la-sparc.Plo@am__quote@
+@AMDEP_TRUE@@am__include@ @am__quote@./$(DEPDIR)/liblzma_la-stream_buffer_decoder.Plo@am__quote@
+@AMDEP_TRUE@@am__include@ @am__quote@./$(DEPDIR)/liblzma_la-stream_buffer_encoder.Plo@am__quote@
+@AMDEP_TRUE@@am__include@ @am__quote@./$(DEPDIR)/liblzma_la-stream_decoder.Plo@am__quote@
+@AMDEP_TRUE@@am__include@ @am__quote@./$(DEPDIR)/liblzma_la-stream_encoder.Plo@am__quote@
+@AMDEP_TRUE@@am__include@ @am__quote@./$(DEPDIR)/liblzma_la-stream_flags_common.Plo@am__quote@
+@AMDEP_TRUE@@am__include@ @am__quote@./$(DEPDIR)/liblzma_la-stream_flags_decoder.Plo@am__quote@
+@AMDEP_TRUE@@am__include@ @am__quote@./$(DEPDIR)/liblzma_la-stream_flags_encoder.Plo@am__quote@
+@AMDEP_TRUE@@am__include@ @am__quote@./$(DEPDIR)/liblzma_la-subblock_decoder.Plo@am__quote@
+@AMDEP_TRUE@@am__include@ @am__quote@./$(DEPDIR)/liblzma_la-subblock_decoder_helper.Plo@am__quote@
+@AMDEP_TRUE@@am__include@ @am__quote@./$(DEPDIR)/liblzma_la-subblock_encoder.Plo@am__quote@
+@AMDEP_TRUE@@am__include@ @am__quote@./$(DEPDIR)/liblzma_la-vli_decoder.Plo@am__quote@
+@AMDEP_TRUE@@am__include@ @am__quote@./$(DEPDIR)/liblzma_la-vli_encoder.Plo@am__quote@
+@AMDEP_TRUE@@am__include@ @am__quote@./$(DEPDIR)/liblzma_la-vli_size.Plo@am__quote@
+@AMDEP_TRUE@@am__include@ @am__quote@./$(DEPDIR)/liblzma_la-x86.Plo@am__quote@
+
+.S.o:
+@am__fastdepCCAS_TRUE@ $(CPPASCOMPILE) -MT $@ -MD -MP -MF $(DEPDIR)/$*.Tpo -c -o $@ $<
+@am__fastdepCCAS_TRUE@ $(am__mv) $(DEPDIR)/$*.Tpo $(DEPDIR)/$*.Po
+@AMDEP_TRUE@@am__fastdepCCAS_FALSE@ source='$<' object='$@' libtool=no @AMDEPBACKSLASH@
+@AMDEP_TRUE@@am__fastdepCCAS_FALSE@ DEPDIR=$(DEPDIR) $(CCASDEPMODE) $(depcomp) @AMDEPBACKSLASH@
+@am__fastdepCCAS_FALSE@ $(CPPASCOMPILE) -c -o $@ $<
+
+.S.obj:
+@am__fastdepCCAS_TRUE@ $(CPPASCOMPILE) -MT $@ -MD -MP -MF $(DEPDIR)/$*.Tpo -c -o $@ `$(CYGPATH_W) '$<'`
+@am__fastdepCCAS_TRUE@ $(am__mv) $(DEPDIR)/$*.Tpo $(DEPDIR)/$*.Po
+@AMDEP_TRUE@@am__fastdepCCAS_FALSE@ source='$<' object='$@' libtool=no @AMDEPBACKSLASH@
+@AMDEP_TRUE@@am__fastdepCCAS_FALSE@ DEPDIR=$(DEPDIR) $(CCASDEPMODE) $(depcomp) @AMDEPBACKSLASH@
+@am__fastdepCCAS_FALSE@ $(CPPASCOMPILE) -c -o $@ `$(CYGPATH_W) '$<'`
+
+.S.lo:
+@am__fastdepCCAS_TRUE@ $(LTCPPASCOMPILE) -MT $@ -MD -MP -MF $(DEPDIR)/$*.Tpo -c -o $@ $<
+@am__fastdepCCAS_TRUE@ $(am__mv) $(DEPDIR)/$*.Tpo $(DEPDIR)/$*.Plo
+@AMDEP_TRUE@@am__fastdepCCAS_FALSE@ source='$<' object='$@' libtool=yes @AMDEPBACKSLASH@
+@AMDEP_TRUE@@am__fastdepCCAS_FALSE@ DEPDIR=$(DEPDIR) $(CCASDEPMODE) $(depcomp) @AMDEPBACKSLASH@
+@am__fastdepCCAS_FALSE@ $(LTCPPASCOMPILE) -c -o $@ $<
+
+liblzma_la-crc32_x86.lo: check/crc32_x86.S
+@am__fastdepCCAS_TRUE@ $(LIBTOOL) $(AM_LIBTOOLFLAGS) $(LIBTOOLFLAGS) --mode=compile $(CCAS) $(DEFS) $(DEFAULT_INCLUDES) $(INCLUDES) $(liblzma_la_CPPFLAGS) $(CPPFLAGS) $(AM_CCASFLAGS) $(CCASFLAGS) -MT liblzma_la-crc32_x86.lo -MD -MP -MF $(DEPDIR)/liblzma_la-crc32_x86.Tpo -c -o liblzma_la-crc32_x86.lo `test -f 'check/crc32_x86.S' || echo '$(srcdir)/'`check/crc32_x86.S
+@am__fastdepCCAS_TRUE@ $(am__mv) $(DEPDIR)/liblzma_la-crc32_x86.Tpo $(DEPDIR)/liblzma_la-crc32_x86.Plo
+@AMDEP_TRUE@@am__fastdepCCAS_FALSE@ source='check/crc32_x86.S' object='liblzma_la-crc32_x86.lo' libtool=yes @AMDEPBACKSLASH@
+@AMDEP_TRUE@@am__fastdepCCAS_FALSE@ DEPDIR=$(DEPDIR) $(CCASDEPMODE) $(depcomp) @AMDEPBACKSLASH@
+@am__fastdepCCAS_FALSE@ $(LIBTOOL) $(AM_LIBTOOLFLAGS) $(LIBTOOLFLAGS) --mode=compile $(CCAS) $(DEFS) $(DEFAULT_INCLUDES) $(INCLUDES) $(liblzma_la_CPPFLAGS) $(CPPFLAGS) $(AM_CCASFLAGS) $(CCASFLAGS) -c -o liblzma_la-crc32_x86.lo `test -f 'check/crc32_x86.S' || echo '$(srcdir)/'`check/crc32_x86.S
+
+liblzma_la-crc64_x86.lo: check/crc64_x86.S
+@am__fastdepCCAS_TRUE@ $(LIBTOOL) $(AM_LIBTOOLFLAGS) $(LIBTOOLFLAGS) --mode=compile $(CCAS) $(DEFS) $(DEFAULT_INCLUDES) $(INCLUDES) $(liblzma_la_CPPFLAGS) $(CPPFLAGS) $(AM_CCASFLAGS) $(CCASFLAGS) -MT liblzma_la-crc64_x86.lo -MD -MP -MF $(DEPDIR)/liblzma_la-crc64_x86.Tpo -c -o liblzma_la-crc64_x86.lo `test -f 'check/crc64_x86.S' || echo '$(srcdir)/'`check/crc64_x86.S
+@am__fastdepCCAS_TRUE@ $(am__mv) $(DEPDIR)/liblzma_la-crc64_x86.Tpo $(DEPDIR)/liblzma_la-crc64_x86.Plo
+@AMDEP_TRUE@@am__fastdepCCAS_FALSE@ source='check/crc64_x86.S' object='liblzma_la-crc64_x86.lo' libtool=yes @AMDEPBACKSLASH@
+@AMDEP_TRUE@@am__fastdepCCAS_FALSE@ DEPDIR=$(DEPDIR) $(CCASDEPMODE) $(depcomp) @AMDEPBACKSLASH@
+@am__fastdepCCAS_FALSE@ $(LIBTOOL) $(AM_LIBTOOLFLAGS) $(LIBTOOLFLAGS) --mode=compile $(CCAS) $(DEFS) $(DEFAULT_INCLUDES) $(INCLUDES) $(liblzma_la_CPPFLAGS) $(CPPFLAGS) $(AM_CCASFLAGS) $(CCASFLAGS) -c -o liblzma_la-crc64_x86.lo `test -f 'check/crc64_x86.S' || echo '$(srcdir)/'`check/crc64_x86.S
+
+.c.o:
+@am__fastdepCC_TRUE@ $(COMPILE) -MT $@ -MD -MP -MF $(DEPDIR)/$*.Tpo -c -o $@ $<
+@am__fastdepCC_TRUE@ $(am__mv) $(DEPDIR)/$*.Tpo $(DEPDIR)/$*.Po
+@AMDEP_TRUE@@am__fastdepCC_FALSE@ source='$<' object='$@' libtool=no @AMDEPBACKSLASH@
+@AMDEP_TRUE@@am__fastdepCC_FALSE@ DEPDIR=$(DEPDIR) $(CCDEPMODE) $(depcomp) @AMDEPBACKSLASH@
+@am__fastdepCC_FALSE@ $(COMPILE) -c $<
+
+.c.obj:
+@am__fastdepCC_TRUE@ $(COMPILE) -MT $@ -MD -MP -MF $(DEPDIR)/$*.Tpo -c -o $@ `$(CYGPATH_W) '$<'`
+@am__fastdepCC_TRUE@ $(am__mv) $(DEPDIR)/$*.Tpo $(DEPDIR)/$*.Po
+@AMDEP_TRUE@@am__fastdepCC_FALSE@ source='$<' object='$@' libtool=no @AMDEPBACKSLASH@
+@AMDEP_TRUE@@am__fastdepCC_FALSE@ DEPDIR=$(DEPDIR) $(CCDEPMODE) $(depcomp) @AMDEPBACKSLASH@
+@am__fastdepCC_FALSE@ $(COMPILE) -c `$(CYGPATH_W) '$<'`
+
+.c.lo:
+@am__fastdepCC_TRUE@ $(LTCOMPILE) -MT $@ -MD -MP -MF $(DEPDIR)/$*.Tpo -c -o $@ $<
+@am__fastdepCC_TRUE@ $(am__mv) $(DEPDIR)/$*.Tpo $(DEPDIR)/$*.Plo
+@AMDEP_TRUE@@am__fastdepCC_FALSE@ source='$<' object='$@' libtool=yes @AMDEPBACKSLASH@
+@AMDEP_TRUE@@am__fastdepCC_FALSE@ DEPDIR=$(DEPDIR) $(CCDEPMODE) $(depcomp) @AMDEPBACKSLASH@
+@am__fastdepCC_FALSE@ $(LTCOMPILE) -c -o $@ $<
+
+liblzma_la-common.lo: common/common.c
+@am__fastdepCC_TRUE@ $(LIBTOOL) --tag=CC $(AM_LIBTOOLFLAGS) $(LIBTOOLFLAGS) --mode=compile $(CC) $(DEFS) $(DEFAULT_INCLUDES) $(INCLUDES) $(liblzma_la_CPPFLAGS) $(CPPFLAGS) $(AM_CFLAGS) $(CFLAGS) -MT liblzma_la-common.lo -MD -MP -MF $(DEPDIR)/liblzma_la-common.Tpo -c -o liblzma_la-common.lo `test -f 'common/common.c' || echo '$(srcdir)/'`common/common.c
+@am__fastdepCC_TRUE@ $(am__mv) $(DEPDIR)/liblzma_la-common.Tpo $(DEPDIR)/liblzma_la-common.Plo
+@AMDEP_TRUE@@am__fastdepCC_FALSE@ source='common/common.c' object='liblzma_la-common.lo' libtool=yes @AMDEPBACKSLASH@
+@AMDEP_TRUE@@am__fastdepCC_FALSE@ DEPDIR=$(DEPDIR) $(CCDEPMODE) $(depcomp) @AMDEPBACKSLASH@
+@am__fastdepCC_FALSE@ $(LIBTOOL) --tag=CC $(AM_LIBTOOLFLAGS) $(LIBTOOLFLAGS) --mode=compile $(CC) $(DEFS) $(DEFAULT_INCLUDES) $(INCLUDES) $(liblzma_la_CPPFLAGS) $(CPPFLAGS) $(AM_CFLAGS) $(CFLAGS) -c -o liblzma_la-common.lo `test -f 'common/common.c' || echo '$(srcdir)/'`common/common.c
+
+liblzma_la-block_util.lo: common/block_util.c
+@am__fastdepCC_TRUE@ $(LIBTOOL) --tag=CC $(AM_LIBTOOLFLAGS) $(LIBTOOLFLAGS) --mode=compile $(CC) $(DEFS) $(DEFAULT_INCLUDES) $(INCLUDES) $(liblzma_la_CPPFLAGS) $(CPPFLAGS) $(AM_CFLAGS) $(CFLAGS) -MT liblzma_la-block_util.lo -MD -MP -MF $(DEPDIR)/liblzma_la-block_util.Tpo -c -o liblzma_la-block_util.lo `test -f 'common/block_util.c' || echo '$(srcdir)/'`common/block_util.c
+@am__fastdepCC_TRUE@ $(am__mv) $(DEPDIR)/liblzma_la-block_util.Tpo $(DEPDIR)/liblzma_la-block_util.Plo
+@AMDEP_TRUE@@am__fastdepCC_FALSE@ source='common/block_util.c' object='liblzma_la-block_util.lo' libtool=yes @AMDEPBACKSLASH@
+@AMDEP_TRUE@@am__fastdepCC_FALSE@ DEPDIR=$(DEPDIR) $(CCDEPMODE) $(depcomp) @AMDEPBACKSLASH@
+@am__fastdepCC_FALSE@ $(LIBTOOL) --tag=CC $(AM_LIBTOOLFLAGS) $(LIBTOOLFLAGS) --mode=compile $(CC) $(DEFS) $(DEFAULT_INCLUDES) $(INCLUDES) $(liblzma_la_CPPFLAGS) $(CPPFLAGS) $(AM_CFLAGS) $(CFLAGS) -c -o liblzma_la-block_util.lo `test -f 'common/block_util.c' || echo '$(srcdir)/'`common/block_util.c
+
+liblzma_la-easy_preset.lo: common/easy_preset.c
+@am__fastdepCC_TRUE@ $(LIBTOOL) --tag=CC $(AM_LIBTOOLFLAGS) $(LIBTOOLFLAGS) --mode=compile $(CC) $(DEFS) $(DEFAULT_INCLUDES) $(INCLUDES) $(liblzma_la_CPPFLAGS) $(CPPFLAGS) $(AM_CFLAGS) $(CFLAGS) -MT liblzma_la-easy_preset.lo -MD -MP -MF $(DEPDIR)/liblzma_la-easy_preset.Tpo -c -o liblzma_la-easy_preset.lo `test -f 'common/easy_preset.c' || echo '$(srcdir)/'`common/easy_preset.c
+@am__fastdepCC_TRUE@ $(am__mv) $(DEPDIR)/liblzma_la-easy_preset.Tpo $(DEPDIR)/liblzma_la-easy_preset.Plo
+@AMDEP_TRUE@@am__fastdepCC_FALSE@ source='common/easy_preset.c' object='liblzma_la-easy_preset.lo' libtool=yes @AMDEPBACKSLASH@
+@AMDEP_TRUE@@am__fastdepCC_FALSE@ DEPDIR=$(DEPDIR) $(CCDEPMODE) $(depcomp) @AMDEPBACKSLASH@
+@am__fastdepCC_FALSE@ $(LIBTOOL) --tag=CC $(AM_LIBTOOLFLAGS) $(LIBTOOLFLAGS) --mode=compile $(CC) $(DEFS) $(DEFAULT_INCLUDES) $(INCLUDES) $(liblzma_la_CPPFLAGS) $(CPPFLAGS) $(AM_CFLAGS) $(CFLAGS) -c -o liblzma_la-easy_preset.lo `test -f 'common/easy_preset.c' || echo '$(srcdir)/'`common/easy_preset.c
+
+liblzma_la-filter_common.lo: common/filter_common.c
+@am__fastdepCC_TRUE@ $(LIBTOOL) --tag=CC $(AM_LIBTOOLFLAGS) $(LIBTOOLFLAGS) --mode=compile $(CC) $(DEFS) $(DEFAULT_INCLUDES) $(INCLUDES) $(liblzma_la_CPPFLAGS) $(CPPFLAGS) $(AM_CFLAGS) $(CFLAGS) -MT liblzma_la-filter_common.lo -MD -MP -MF $(DEPDIR)/liblzma_la-filter_common.Tpo -c -o liblzma_la-filter_common.lo `test -f 'common/filter_common.c' || echo '$(srcdir)/'`common/filter_common.c
+@am__fastdepCC_TRUE@ $(am__mv) $(DEPDIR)/liblzma_la-filter_common.Tpo $(DEPDIR)/liblzma_la-filter_common.Plo
+@AMDEP_TRUE@@am__fastdepCC_FALSE@ source='common/filter_common.c' object='liblzma_la-filter_common.lo' libtool=yes @AMDEPBACKSLASH@
+@AMDEP_TRUE@@am__fastdepCC_FALSE@ DEPDIR=$(DEPDIR) $(CCDEPMODE) $(depcomp) @AMDEPBACKSLASH@
+@am__fastdepCC_FALSE@ $(LIBTOOL) --tag=CC $(AM_LIBTOOLFLAGS) $(LIBTOOLFLAGS) --mode=compile $(CC) $(DEFS) $(DEFAULT_INCLUDES) $(INCLUDES) $(liblzma_la_CPPFLAGS) $(CPPFLAGS) $(AM_CFLAGS) $(CFLAGS) -c -o liblzma_la-filter_common.lo `test -f 'common/filter_common.c' || echo '$(srcdir)/'`common/filter_common.c
+
+liblzma_la-index.lo: common/index.c
+@am__fastdepCC_TRUE@ $(LIBTOOL) --tag=CC $(AM_LIBTOOLFLAGS) $(LIBTOOLFLAGS) --mode=compile $(CC) $(DEFS) $(DEFAULT_INCLUDES) $(INCLUDES) $(liblzma_la_CPPFLAGS) $(CPPFLAGS) $(AM_CFLAGS) $(CFLAGS) -MT liblzma_la-index.lo -MD -MP -MF $(DEPDIR)/liblzma_la-index.Tpo -c -o liblzma_la-index.lo `test -f 'common/index.c' || echo '$(srcdir)/'`common/index.c
+@am__fastdepCC_TRUE@ $(am__mv) $(DEPDIR)/liblzma_la-index.Tpo $(DEPDIR)/liblzma_la-index.Plo
+@AMDEP_TRUE@@am__fastdepCC_FALSE@ source='common/index.c' object='liblzma_la-index.lo' libtool=yes @AMDEPBACKSLASH@
+@AMDEP_TRUE@@am__fastdepCC_FALSE@ DEPDIR=$(DEPDIR) $(CCDEPMODE) $(depcomp) @AMDEPBACKSLASH@
+@am__fastdepCC_FALSE@ $(LIBTOOL) --tag=CC $(AM_LIBTOOLFLAGS) $(LIBTOOLFLAGS) --mode=compile $(CC) $(DEFS) $(DEFAULT_INCLUDES) $(INCLUDES) $(liblzma_la_CPPFLAGS) $(CPPFLAGS) $(AM_CFLAGS) $(CFLAGS) -c -o liblzma_la-index.lo `test -f 'common/index.c' || echo '$(srcdir)/'`common/index.c
+
+liblzma_la-stream_flags_common.lo: common/stream_flags_common.c
+@am__fastdepCC_TRUE@ $(LIBTOOL) --tag=CC $(AM_LIBTOOLFLAGS) $(LIBTOOLFLAGS) --mode=compile $(CC) $(DEFS) $(DEFAULT_INCLUDES) $(INCLUDES) $(liblzma_la_CPPFLAGS) $(CPPFLAGS) $(AM_CFLAGS) $(CFLAGS) -MT liblzma_la-stream_flags_common.lo -MD -MP -MF $(DEPDIR)/liblzma_la-stream_flags_common.Tpo -c -o liblzma_la-stream_flags_common.lo `test -f 'common/stream_flags_common.c' || echo '$(srcdir)/'`common/stream_flags_common.c
+@am__fastdepCC_TRUE@ $(am__mv) $(DEPDIR)/liblzma_la-stream_flags_common.Tpo $(DEPDIR)/liblzma_la-stream_flags_common.Plo
+@AMDEP_TRUE@@am__fastdepCC_FALSE@ source='common/stream_flags_common.c' object='liblzma_la-stream_flags_common.lo' libtool=yes @AMDEPBACKSLASH@
+@AMDEP_TRUE@@am__fastdepCC_FALSE@ DEPDIR=$(DEPDIR) $(CCDEPMODE) $(depcomp) @AMDEPBACKSLASH@
+@am__fastdepCC_FALSE@ $(LIBTOOL) --tag=CC $(AM_LIBTOOLFLAGS) $(LIBTOOLFLAGS) --mode=compile $(CC) $(DEFS) $(DEFAULT_INCLUDES) $(INCLUDES) $(liblzma_la_CPPFLAGS) $(CPPFLAGS) $(AM_CFLAGS) $(CFLAGS) -c -o liblzma_la-stream_flags_common.lo `test -f 'common/stream_flags_common.c' || echo '$(srcdir)/'`common/stream_flags_common.c
+
+liblzma_la-vli_size.lo: common/vli_size.c
+@am__fastdepCC_TRUE@ $(LIBTOOL) --tag=CC $(AM_LIBTOOLFLAGS) $(LIBTOOLFLAGS) --mode=compile $(CC) $(DEFS) $(DEFAULT_INCLUDES) $(INCLUDES) $(liblzma_la_CPPFLAGS) $(CPPFLAGS) $(AM_CFLAGS) $(CFLAGS) -MT liblzma_la-vli_size.lo -MD -MP -MF $(DEPDIR)/liblzma_la-vli_size.Tpo -c -o liblzma_la-vli_size.lo `test -f 'common/vli_size.c' || echo '$(srcdir)/'`common/vli_size.c
+@am__fastdepCC_TRUE@ $(am__mv) $(DEPDIR)/liblzma_la-vli_size.Tpo $(DEPDIR)/liblzma_la-vli_size.Plo
+@AMDEP_TRUE@@am__fastdepCC_FALSE@ source='common/vli_size.c' object='liblzma_la-vli_size.lo' libtool=yes @AMDEPBACKSLASH@
+@AMDEP_TRUE@@am__fastdepCC_FALSE@ DEPDIR=$(DEPDIR) $(CCDEPMODE) $(depcomp) @AMDEPBACKSLASH@
+@am__fastdepCC_FALSE@ $(LIBTOOL) --tag=CC $(AM_LIBTOOLFLAGS) $(LIBTOOLFLAGS) --mode=compile $(CC) $(DEFS) $(DEFAULT_INCLUDES) $(INCLUDES) $(liblzma_la_CPPFLAGS) $(CPPFLAGS) $(AM_CFLAGS) $(CFLAGS) -c -o liblzma_la-vli_size.lo `test -f 'common/vli_size.c' || echo '$(srcdir)/'`common/vli_size.c
+
+liblzma_la-alone_encoder.lo: common/alone_encoder.c
+@am__fastdepCC_TRUE@ $(LIBTOOL) --tag=CC $(AM_LIBTOOLFLAGS) $(LIBTOOLFLAGS) --mode=compile $(CC) $(DEFS) $(DEFAULT_INCLUDES) $(INCLUDES) $(liblzma_la_CPPFLAGS) $(CPPFLAGS) $(AM_CFLAGS) $(CFLAGS) -MT liblzma_la-alone_encoder.lo -MD -MP -MF $(DEPDIR)/liblzma_la-alone_encoder.Tpo -c -o liblzma_la-alone_encoder.lo `test -f 'common/alone_encoder.c' || echo '$(srcdir)/'`common/alone_encoder.c
+@am__fastdepCC_TRUE@ $(am__mv) $(DEPDIR)/liblzma_la-alone_encoder.Tpo $(DEPDIR)/liblzma_la-alone_encoder.Plo
+@AMDEP_TRUE@@am__fastdepCC_FALSE@ source='common/alone_encoder.c' object='liblzma_la-alone_encoder.lo' libtool=yes @AMDEPBACKSLASH@
+@AMDEP_TRUE@@am__fastdepCC_FALSE@ DEPDIR=$(DEPDIR) $(CCDEPMODE) $(depcomp) @AMDEPBACKSLASH@
+@am__fastdepCC_FALSE@ $(LIBTOOL) --tag=CC $(AM_LIBTOOLFLAGS) $(LIBTOOLFLAGS) --mode=compile $(CC) $(DEFS) $(DEFAULT_INCLUDES) $(INCLUDES) $(liblzma_la_CPPFLAGS) $(CPPFLAGS) $(AM_CFLAGS) $(CFLAGS) -c -o liblzma_la-alone_encoder.lo `test -f 'common/alone_encoder.c' || echo '$(srcdir)/'`common/alone_encoder.c
+
+liblzma_la-block_buffer_encoder.lo: common/block_buffer_encoder.c
+@am__fastdepCC_TRUE@ $(LIBTOOL) --tag=CC $(AM_LIBTOOLFLAGS) $(LIBTOOLFLAGS) --mode=compile $(CC) $(DEFS) $(DEFAULT_INCLUDES) $(INCLUDES) $(liblzma_la_CPPFLAGS) $(CPPFLAGS) $(AM_CFLAGS) $(CFLAGS) -MT liblzma_la-block_buffer_encoder.lo -MD -MP -MF $(DEPDIR)/liblzma_la-block_buffer_encoder.Tpo -c -o liblzma_la-block_buffer_encoder.lo `test -f 'common/block_buffer_encoder.c' || echo '$(srcdir)/'`common/block_buffer_encoder.c
+@am__fastdepCC_TRUE@ $(am__mv) $(DEPDIR)/liblzma_la-block_buffer_encoder.Tpo $(DEPDIR)/liblzma_la-block_buffer_encoder.Plo
+@AMDEP_TRUE@@am__fastdepCC_FALSE@ source='common/block_buffer_encoder.c' object='liblzma_la-block_buffer_encoder.lo' libtool=yes @AMDEPBACKSLASH@
+@AMDEP_TRUE@@am__fastdepCC_FALSE@ DEPDIR=$(DEPDIR) $(CCDEPMODE) $(depcomp) @AMDEPBACKSLASH@
+@am__fastdepCC_FALSE@ $(LIBTOOL) --tag=CC $(AM_LIBTOOLFLAGS) $(LIBTOOLFLAGS) --mode=compile $(CC) $(DEFS) $(DEFAULT_INCLUDES) $(INCLUDES) $(liblzma_la_CPPFLAGS) $(CPPFLAGS) $(AM_CFLAGS) $(CFLAGS) -c -o liblzma_la-block_buffer_encoder.lo `test -f 'common/block_buffer_encoder.c' || echo '$(srcdir)/'`common/block_buffer_encoder.c
+
+liblzma_la-block_encoder.lo: common/block_encoder.c
+@am__fastdepCC_TRUE@ $(LIBTOOL) --tag=CC $(AM_LIBTOOLFLAGS) $(LIBTOOLFLAGS) --mode=compile $(CC) $(DEFS) $(DEFAULT_INCLUDES) $(INCLUDES) $(liblzma_la_CPPFLAGS) $(CPPFLAGS) $(AM_CFLAGS) $(CFLAGS) -MT liblzma_la-block_encoder.lo -MD -MP -MF $(DEPDIR)/liblzma_la-block_encoder.Tpo -c -o liblzma_la-block_encoder.lo `test -f 'common/block_encoder.c' || echo '$(srcdir)/'`common/block_encoder.c
+@am__fastdepCC_TRUE@ $(am__mv) $(DEPDIR)/liblzma_la-block_encoder.Tpo $(DEPDIR)/liblzma_la-block_encoder.Plo
+@AMDEP_TRUE@@am__fastdepCC_FALSE@ source='common/block_encoder.c' object='liblzma_la-block_encoder.lo' libtool=yes @AMDEPBACKSLASH@
+@AMDEP_TRUE@@am__fastdepCC_FALSE@ DEPDIR=$(DEPDIR) $(CCDEPMODE) $(depcomp) @AMDEPBACKSLASH@
+@am__fastdepCC_FALSE@ $(LIBTOOL) --tag=CC $(AM_LIBTOOLFLAGS) $(LIBTOOLFLAGS) --mode=compile $(CC) $(DEFS) $(DEFAULT_INCLUDES) $(INCLUDES) $(liblzma_la_CPPFLAGS) $(CPPFLAGS) $(AM_CFLAGS) $(CFLAGS) -c -o liblzma_la-block_encoder.lo `test -f 'common/block_encoder.c' || echo '$(srcdir)/'`common/block_encoder.c
+
+liblzma_la-block_header_encoder.lo: common/block_header_encoder.c
+@am__fastdepCC_TRUE@ $(LIBTOOL) --tag=CC $(AM_LIBTOOLFLAGS) $(LIBTOOLFLAGS) --mode=compile $(CC) $(DEFS) $(DEFAULT_INCLUDES) $(INCLUDES) $(liblzma_la_CPPFLAGS) $(CPPFLAGS) $(AM_CFLAGS) $(CFLAGS) -MT liblzma_la-block_header_encoder.lo -MD -MP -MF $(DEPDIR)/liblzma_la-block_header_encoder.Tpo -c -o liblzma_la-block_header_encoder.lo `test -f 'common/block_header_encoder.c' || echo '$(srcdir)/'`common/block_header_encoder.c
+@am__fastdepCC_TRUE@ $(am__mv) $(DEPDIR)/liblzma_la-block_header_encoder.Tpo $(DEPDIR)/liblzma_la-block_header_encoder.Plo
+@AMDEP_TRUE@@am__fastdepCC_FALSE@ source='common/block_header_encoder.c' object='liblzma_la-block_header_encoder.lo' libtool=yes @AMDEPBACKSLASH@
+@AMDEP_TRUE@@am__fastdepCC_FALSE@ DEPDIR=$(DEPDIR) $(CCDEPMODE) $(depcomp) @AMDEPBACKSLASH@
+@am__fastdepCC_FALSE@ $(LIBTOOL) --tag=CC $(AM_LIBTOOLFLAGS) $(LIBTOOLFLAGS) --mode=compile $(CC) $(DEFS) $(DEFAULT_INCLUDES) $(INCLUDES) $(liblzma_la_CPPFLAGS) $(CPPFLAGS) $(AM_CFLAGS) $(CFLAGS) -c -o liblzma_la-block_header_encoder.lo `test -f 'common/block_header_encoder.c' || echo '$(srcdir)/'`common/block_header_encoder.c
+
+liblzma_la-easy_buffer_encoder.lo: common/easy_buffer_encoder.c
+@am__fastdepCC_TRUE@ $(LIBTOOL) --tag=CC $(AM_LIBTOOLFLAGS) $(LIBTOOLFLAGS) --mode=compile $(CC) $(DEFS) $(DEFAULT_INCLUDES) $(INCLUDES) $(liblzma_la_CPPFLAGS) $(CPPFLAGS) $(AM_CFLAGS) $(CFLAGS) -MT liblzma_la-easy_buffer_encoder.lo -MD -MP -MF $(DEPDIR)/liblzma_la-easy_buffer_encoder.Tpo -c -o liblzma_la-easy_buffer_encoder.lo `test -f 'common/easy_buffer_encoder.c' || echo '$(srcdir)/'`common/easy_buffer_encoder.c
+@am__fastdepCC_TRUE@ $(am__mv) $(DEPDIR)/liblzma_la-easy_buffer_encoder.Tpo $(DEPDIR)/liblzma_la-easy_buffer_encoder.Plo
+@AMDEP_TRUE@@am__fastdepCC_FALSE@ source='common/easy_buffer_encoder.c' object='liblzma_la-easy_buffer_encoder.lo' libtool=yes @AMDEPBACKSLASH@
+@AMDEP_TRUE@@am__fastdepCC_FALSE@ DEPDIR=$(DEPDIR) $(CCDEPMODE) $(depcomp) @AMDEPBACKSLASH@
+@am__fastdepCC_FALSE@ $(LIBTOOL) --tag=CC $(AM_LIBTOOLFLAGS) $(LIBTOOLFLAGS) --mode=compile $(CC) $(DEFS) $(DEFAULT_INCLUDES) $(INCLUDES) $(liblzma_la_CPPFLAGS) $(CPPFLAGS) $(AM_CFLAGS) $(CFLAGS) -c -o liblzma_la-easy_buffer_encoder.lo `test -f 'common/easy_buffer_encoder.c' || echo '$(srcdir)/'`common/easy_buffer_encoder.c
+
+liblzma_la-easy_encoder.lo: common/easy_encoder.c
+@am__fastdepCC_TRUE@ $(LIBTOOL) --tag=CC $(AM_LIBTOOLFLAGS) $(LIBTOOLFLAGS) --mode=compile $(CC) $(DEFS) $(DEFAULT_INCLUDES) $(INCLUDES) $(liblzma_la_CPPFLAGS) $(CPPFLAGS) $(AM_CFLAGS) $(CFLAGS) -MT liblzma_la-easy_encoder.lo -MD -MP -MF $(DEPDIR)/liblzma_la-easy_encoder.Tpo -c -o liblzma_la-easy_encoder.lo `test -f 'common/easy_encoder.c' || echo '$(srcdir)/'`common/easy_encoder.c
+@am__fastdepCC_TRUE@ $(am__mv) $(DEPDIR)/liblzma_la-easy_encoder.Tpo $(DEPDIR)/liblzma_la-easy_encoder.Plo
+@AMDEP_TRUE@@am__fastdepCC_FALSE@ source='common/easy_encoder.c' object='liblzma_la-easy_encoder.lo' libtool=yes @AMDEPBACKSLASH@
+@AMDEP_TRUE@@am__fastdepCC_FALSE@ DEPDIR=$(DEPDIR) $(CCDEPMODE) $(depcomp) @AMDEPBACKSLASH@
+@am__fastdepCC_FALSE@ $(LIBTOOL) --tag=CC $(AM_LIBTOOLFLAGS) $(LIBTOOLFLAGS) --mode=compile $(CC) $(DEFS) $(DEFAULT_INCLUDES) $(INCLUDES) $(liblzma_la_CPPFLAGS) $(CPPFLAGS) $(AM_CFLAGS) $(CFLAGS) -c -o liblzma_la-easy_encoder.lo `test -f 'common/easy_encoder.c' || echo '$(srcdir)/'`common/easy_encoder.c
+
+liblzma_la-easy_encoder_memusage.lo: common/easy_encoder_memusage.c
+@am__fastdepCC_TRUE@ $(LIBTOOL) --tag=CC $(AM_LIBTOOLFLAGS) $(LIBTOOLFLAGS) --mode=compile $(CC) $(DEFS) $(DEFAULT_INCLUDES) $(INCLUDES) $(liblzma_la_CPPFLAGS) $(CPPFLAGS) $(AM_CFLAGS) $(CFLAGS) -MT liblzma_la-easy_encoder_memusage.lo -MD -MP -MF $(DEPDIR)/liblzma_la-easy_encoder_memusage.Tpo -c -o liblzma_la-easy_encoder_memusage.lo `test -f 'common/easy_encoder_memusage.c' || echo '$(srcdir)/'`common/easy_encoder_memusage.c
+@am__fastdepCC_TRUE@ $(am__mv) $(DEPDIR)/liblzma_la-easy_encoder_memusage.Tpo $(DEPDIR)/liblzma_la-easy_encoder_memusage.Plo
+@AMDEP_TRUE@@am__fastdepCC_FALSE@ source='common/easy_encoder_memusage.c' object='liblzma_la-easy_encoder_memusage.lo' libtool=yes @AMDEPBACKSLASH@
+@AMDEP_TRUE@@am__fastdepCC_FALSE@ DEPDIR=$(DEPDIR) $(CCDEPMODE) $(depcomp) @AMDEPBACKSLASH@
+@am__fastdepCC_FALSE@ $(LIBTOOL) --tag=CC $(AM_LIBTOOLFLAGS) $(LIBTOOLFLAGS) --mode=compile $(CC) $(DEFS) $(DEFAULT_INCLUDES) $(INCLUDES) $(liblzma_la_CPPFLAGS) $(CPPFLAGS) $(AM_CFLAGS) $(CFLAGS) -c -o liblzma_la-easy_encoder_memusage.lo `test -f 'common/easy_encoder_memusage.c' || echo '$(srcdir)/'`common/easy_encoder_memusage.c
+
+liblzma_la-filter_buffer_encoder.lo: common/filter_buffer_encoder.c
+@am__fastdepCC_TRUE@ $(LIBTOOL) --tag=CC $(AM_LIBTOOLFLAGS) $(LIBTOOLFLAGS) --mode=compile $(CC) $(DEFS) $(DEFAULT_INCLUDES) $(INCLUDES) $(liblzma_la_CPPFLAGS) $(CPPFLAGS) $(AM_CFLAGS) $(CFLAGS) -MT liblzma_la-filter_buffer_encoder.lo -MD -MP -MF $(DEPDIR)/liblzma_la-filter_buffer_encoder.Tpo -c -o liblzma_la-filter_buffer_encoder.lo `test -f 'common/filter_buffer_encoder.c' || echo '$(srcdir)/'`common/filter_buffer_encoder.c
+@am__fastdepCC_TRUE@ $(am__mv) $(DEPDIR)/liblzma_la-filter_buffer_encoder.Tpo $(DEPDIR)/liblzma_la-filter_buffer_encoder.Plo
+@AMDEP_TRUE@@am__fastdepCC_FALSE@ source='common/filter_buffer_encoder.c' object='liblzma_la-filter_buffer_encoder.lo' libtool=yes @AMDEPBACKSLASH@
+@AMDEP_TRUE@@am__fastdepCC_FALSE@ DEPDIR=$(DEPDIR) $(CCDEPMODE) $(depcomp) @AMDEPBACKSLASH@
+@am__fastdepCC_FALSE@ $(LIBTOOL) --tag=CC $(AM_LIBTOOLFLAGS) $(LIBTOOLFLAGS) --mode=compile $(CC) $(DEFS) $(DEFAULT_INCLUDES) $(INCLUDES) $(liblzma_la_CPPFLAGS) $(CPPFLAGS) $(AM_CFLAGS) $(CFLAGS) -c -o liblzma_la-filter_buffer_encoder.lo `test -f 'common/filter_buffer_encoder.c' || echo '$(srcdir)/'`common/filter_buffer_encoder.c
+
+liblzma_la-filter_encoder.lo: common/filter_encoder.c
+@am__fastdepCC_TRUE@ $(LIBTOOL) --tag=CC $(AM_LIBTOOLFLAGS) $(LIBTOOLFLAGS) --mode=compile $(CC) $(DEFS) $(DEFAULT_INCLUDES) $(INCLUDES) $(liblzma_la_CPPFLAGS) $(CPPFLAGS) $(AM_CFLAGS) $(CFLAGS) -MT liblzma_la-filter_encoder.lo -MD -MP -MF $(DEPDIR)/liblzma_la-filter_encoder.Tpo -c -o liblzma_la-filter_encoder.lo `test -f 'common/filter_encoder.c' || echo '$(srcdir)/'`common/filter_encoder.c
+@am__fastdepCC_TRUE@ $(am__mv) $(DEPDIR)/liblzma_la-filter_encoder.Tpo $(DEPDIR)/liblzma_la-filter_encoder.Plo
+@AMDEP_TRUE@@am__fastdepCC_FALSE@ source='common/filter_encoder.c' object='liblzma_la-filter_encoder.lo' libtool=yes @AMDEPBACKSLASH@
+@AMDEP_TRUE@@am__fastdepCC_FALSE@ DEPDIR=$(DEPDIR) $(CCDEPMODE) $(depcomp) @AMDEPBACKSLASH@
+@am__fastdepCC_FALSE@ $(LIBTOOL) --tag=CC $(AM_LIBTOOLFLAGS) $(LIBTOOLFLAGS) --mode=compile $(CC) $(DEFS) $(DEFAULT_INCLUDES) $(INCLUDES) $(liblzma_la_CPPFLAGS) $(CPPFLAGS) $(AM_CFLAGS) $(CFLAGS) -c -o liblzma_la-filter_encoder.lo `test -f 'common/filter_encoder.c' || echo '$(srcdir)/'`common/filter_encoder.c
+
+liblzma_la-filter_flags_encoder.lo: common/filter_flags_encoder.c
+@am__fastdepCC_TRUE@ $(LIBTOOL) --tag=CC $(AM_LIBTOOLFLAGS) $(LIBTOOLFLAGS) --mode=compile $(CC) $(DEFS) $(DEFAULT_INCLUDES) $(INCLUDES) $(liblzma_la_CPPFLAGS) $(CPPFLAGS) $(AM_CFLAGS) $(CFLAGS) -MT liblzma_la-filter_flags_encoder.lo -MD -MP -MF $(DEPDIR)/liblzma_la-filter_flags_encoder.Tpo -c -o liblzma_la-filter_flags_encoder.lo `test -f 'common/filter_flags_encoder.c' || echo '$(srcdir)/'`common/filter_flags_encoder.c
+@am__fastdepCC_TRUE@ $(am__mv) $(DEPDIR)/liblzma_la-filter_flags_encoder.Tpo $(DEPDIR)/liblzma_la-filter_flags_encoder.Plo
+@AMDEP_TRUE@@am__fastdepCC_FALSE@ source='common/filter_flags_encoder.c' object='liblzma_la-filter_flags_encoder.lo' libtool=yes @AMDEPBACKSLASH@
+@AMDEP_TRUE@@am__fastdepCC_FALSE@ DEPDIR=$(DEPDIR) $(CCDEPMODE) $(depcomp) @AMDEPBACKSLASH@
+@am__fastdepCC_FALSE@ $(LIBTOOL) --tag=CC $(AM_LIBTOOLFLAGS) $(LIBTOOLFLAGS) --mode=compile $(CC) $(DEFS) $(DEFAULT_INCLUDES) $(INCLUDES) $(liblzma_la_CPPFLAGS) $(CPPFLAGS) $(AM_CFLAGS) $(CFLAGS) -c -o liblzma_la-filter_flags_encoder.lo `test -f 'common/filter_flags_encoder.c' || echo '$(srcdir)/'`common/filter_flags_encoder.c
+
+liblzma_la-index_encoder.lo: common/index_encoder.c
+@am__fastdepCC_TRUE@ $(LIBTOOL) --tag=CC $(AM_LIBTOOLFLAGS) $(LIBTOOLFLAGS) --mode=compile $(CC) $(DEFS) $(DEFAULT_INCLUDES) $(INCLUDES) $(liblzma_la_CPPFLAGS) $(CPPFLAGS) $(AM_CFLAGS) $(CFLAGS) -MT liblzma_la-index_encoder.lo -MD -MP -MF $(DEPDIR)/liblzma_la-index_encoder.Tpo -c -o liblzma_la-index_encoder.lo `test -f 'common/index_encoder.c' || echo '$(srcdir)/'`common/index_encoder.c
+@am__fastdepCC_TRUE@ $(am__mv) $(DEPDIR)/liblzma_la-index_encoder.Tpo $(DEPDIR)/liblzma_la-index_encoder.Plo
+@AMDEP_TRUE@@am__fastdepCC_FALSE@ source='common/index_encoder.c' object='liblzma_la-index_encoder.lo' libtool=yes @AMDEPBACKSLASH@
+@AMDEP_TRUE@@am__fastdepCC_FALSE@ DEPDIR=$(DEPDIR) $(CCDEPMODE) $(depcomp) @AMDEPBACKSLASH@
+@am__fastdepCC_FALSE@ $(LIBTOOL) --tag=CC $(AM_LIBTOOLFLAGS) $(LIBTOOLFLAGS) --mode=compile $(CC) $(DEFS) $(DEFAULT_INCLUDES) $(INCLUDES) $(liblzma_la_CPPFLAGS) $(CPPFLAGS) $(AM_CFLAGS) $(CFLAGS) -c -o liblzma_la-index_encoder.lo `test -f 'common/index_encoder.c' || echo '$(srcdir)/'`common/index_encoder.c
+
+liblzma_la-stream_buffer_encoder.lo: common/stream_buffer_encoder.c
+@am__fastdepCC_TRUE@ $(LIBTOOL) --tag=CC $(AM_LIBTOOLFLAGS) $(LIBTOOLFLAGS) --mode=compile $(CC) $(DEFS) $(DEFAULT_INCLUDES) $(INCLUDES) $(liblzma_la_CPPFLAGS) $(CPPFLAGS) $(AM_CFLAGS) $(CFLAGS) -MT liblzma_la-stream_buffer_encoder.lo -MD -MP -MF $(DEPDIR)/liblzma_la-stream_buffer_encoder.Tpo -c -o liblzma_la-stream_buffer_encoder.lo `test -f 'common/stream_buffer_encoder.c' || echo '$(srcdir)/'`common/stream_buffer_encoder.c
+@am__fastdepCC_TRUE@ $(am__mv) $(DEPDIR)/liblzma_la-stream_buffer_encoder.Tpo $(DEPDIR)/liblzma_la-stream_buffer_encoder.Plo
+@AMDEP_TRUE@@am__fastdepCC_FALSE@ source='common/stream_buffer_encoder.c' object='liblzma_la-stream_buffer_encoder.lo' libtool=yes @AMDEPBACKSLASH@
+@AMDEP_TRUE@@am__fastdepCC_FALSE@ DEPDIR=$(DEPDIR) $(CCDEPMODE) $(depcomp) @AMDEPBACKSLASH@
+@am__fastdepCC_FALSE@ $(LIBTOOL) --tag=CC $(AM_LIBTOOLFLAGS) $(LIBTOOLFLAGS) --mode=compile $(CC) $(DEFS) $(DEFAULT_INCLUDES) $(INCLUDES) $(liblzma_la_CPPFLAGS) $(CPPFLAGS) $(AM_CFLAGS) $(CFLAGS) -c -o liblzma_la-stream_buffer_encoder.lo `test -f 'common/stream_buffer_encoder.c' || echo '$(srcdir)/'`common/stream_buffer_encoder.c
+
+liblzma_la-stream_encoder.lo: common/stream_encoder.c
+@am__fastdepCC_TRUE@ $(LIBTOOL) --tag=CC $(AM_LIBTOOLFLAGS) $(LIBTOOLFLAGS) --mode=compile $(CC) $(DEFS) $(DEFAULT_INCLUDES) $(INCLUDES) $(liblzma_la_CPPFLAGS) $(CPPFLAGS) $(AM_CFLAGS) $(CFLAGS) -MT liblzma_la-stream_encoder.lo -MD -MP -MF $(DEPDIR)/liblzma_la-stream_encoder.Tpo -c -o liblzma_la-stream_encoder.lo `test -f 'common/stream_encoder.c' || echo '$(srcdir)/'`common/stream_encoder.c
+@am__fastdepCC_TRUE@ $(am__mv) $(DEPDIR)/liblzma_la-stream_encoder.Tpo $(DEPDIR)/liblzma_la-stream_encoder.Plo
+@AMDEP_TRUE@@am__fastdepCC_FALSE@ source='common/stream_encoder.c' object='liblzma_la-stream_encoder.lo' libtool=yes @AMDEPBACKSLASH@
+@AMDEP_TRUE@@am__fastdepCC_FALSE@ DEPDIR=$(DEPDIR) $(CCDEPMODE) $(depcomp) @AMDEPBACKSLASH@
+@am__fastdepCC_FALSE@ $(LIBTOOL) --tag=CC $(AM_LIBTOOLFLAGS) $(LIBTOOLFLAGS) --mode=compile $(CC) $(DEFS) $(DEFAULT_INCLUDES) $(INCLUDES) $(liblzma_la_CPPFLAGS) $(CPPFLAGS) $(AM_CFLAGS) $(CFLAGS) -c -o liblzma_la-stream_encoder.lo `test -f 'common/stream_encoder.c' || echo '$(srcdir)/'`common/stream_encoder.c
+
+liblzma_la-stream_flags_encoder.lo: common/stream_flags_encoder.c
+@am__fastdepCC_TRUE@ $(LIBTOOL) --tag=CC $(AM_LIBTOOLFLAGS) $(LIBTOOLFLAGS) --mode=compile $(CC) $(DEFS) $(DEFAULT_INCLUDES) $(INCLUDES) $(liblzma_la_CPPFLAGS) $(CPPFLAGS) $(AM_CFLAGS) $(CFLAGS) -MT liblzma_la-stream_flags_encoder.lo -MD -MP -MF $(DEPDIR)/liblzma_la-stream_flags_encoder.Tpo -c -o liblzma_la-stream_flags_encoder.lo `test -f 'common/stream_flags_encoder.c' || echo '$(srcdir)/'`common/stream_flags_encoder.c
+@am__fastdepCC_TRUE@ $(am__mv) $(DEPDIR)/liblzma_la-stream_flags_encoder.Tpo $(DEPDIR)/liblzma_la-stream_flags_encoder.Plo
+@AMDEP_TRUE@@am__fastdepCC_FALSE@ source='common/stream_flags_encoder.c' object='liblzma_la-stream_flags_encoder.lo' libtool=yes @AMDEPBACKSLASH@
+@AMDEP_TRUE@@am__fastdepCC_FALSE@ DEPDIR=$(DEPDIR) $(CCDEPMODE) $(depcomp) @AMDEPBACKSLASH@
+@am__fastdepCC_FALSE@ $(LIBTOOL) --tag=CC $(AM_LIBTOOLFLAGS) $(LIBTOOLFLAGS) --mode=compile $(CC) $(DEFS) $(DEFAULT_INCLUDES) $(INCLUDES) $(liblzma_la_CPPFLAGS) $(CPPFLAGS) $(AM_CFLAGS) $(CFLAGS) -c -o liblzma_la-stream_flags_encoder.lo `test -f 'common/stream_flags_encoder.c' || echo '$(srcdir)/'`common/stream_flags_encoder.c
+
+liblzma_la-vli_encoder.lo: common/vli_encoder.c
+@am__fastdepCC_TRUE@ $(LIBTOOL) --tag=CC $(AM_LIBTOOLFLAGS) $(LIBTOOLFLAGS) --mode=compile $(CC) $(DEFS) $(DEFAULT_INCLUDES) $(INCLUDES) $(liblzma_la_CPPFLAGS) $(CPPFLAGS) $(AM_CFLAGS) $(CFLAGS) -MT liblzma_la-vli_encoder.lo -MD -MP -MF $(DEPDIR)/liblzma_la-vli_encoder.Tpo -c -o liblzma_la-vli_encoder.lo `test -f 'common/vli_encoder.c' || echo '$(srcdir)/'`common/vli_encoder.c
+@am__fastdepCC_TRUE@ $(am__mv) $(DEPDIR)/liblzma_la-vli_encoder.Tpo $(DEPDIR)/liblzma_la-vli_encoder.Plo
+@AMDEP_TRUE@@am__fastdepCC_FALSE@ source='common/vli_encoder.c' object='liblzma_la-vli_encoder.lo' libtool=yes @AMDEPBACKSLASH@
+@AMDEP_TRUE@@am__fastdepCC_FALSE@ DEPDIR=$(DEPDIR) $(CCDEPMODE) $(depcomp) @AMDEPBACKSLASH@
+@am__fastdepCC_FALSE@ $(LIBTOOL) --tag=CC $(AM_LIBTOOLFLAGS) $(LIBTOOLFLAGS) --mode=compile $(CC) $(DEFS) $(DEFAULT_INCLUDES) $(INCLUDES) $(liblzma_la_CPPFLAGS) $(CPPFLAGS) $(AM_CFLAGS) $(CFLAGS) -c -o liblzma_la-vli_encoder.lo `test -f 'common/vli_encoder.c' || echo '$(srcdir)/'`common/vli_encoder.c
+
+liblzma_la-alone_decoder.lo: common/alone_decoder.c
+@am__fastdepCC_TRUE@ $(LIBTOOL) --tag=CC $(AM_LIBTOOLFLAGS) $(LIBTOOLFLAGS) --mode=compile $(CC) $(DEFS) $(DEFAULT_INCLUDES) $(INCLUDES) $(liblzma_la_CPPFLAGS) $(CPPFLAGS) $(AM_CFLAGS) $(CFLAGS) -MT liblzma_la-alone_decoder.lo -MD -MP -MF $(DEPDIR)/liblzma_la-alone_decoder.Tpo -c -o liblzma_la-alone_decoder.lo `test -f 'common/alone_decoder.c' || echo '$(srcdir)/'`common/alone_decoder.c
+@am__fastdepCC_TRUE@ $(am__mv) $(DEPDIR)/liblzma_la-alone_decoder.Tpo $(DEPDIR)/liblzma_la-alone_decoder.Plo
+@AMDEP_TRUE@@am__fastdepCC_FALSE@ source='common/alone_decoder.c' object='liblzma_la-alone_decoder.lo' libtool=yes @AMDEPBACKSLASH@
+@AMDEP_TRUE@@am__fastdepCC_FALSE@ DEPDIR=$(DEPDIR) $(CCDEPMODE) $(depcomp) @AMDEPBACKSLASH@
+@am__fastdepCC_FALSE@ $(LIBTOOL) --tag=CC $(AM_LIBTOOLFLAGS) $(LIBTOOLFLAGS) --mode=compile $(CC) $(DEFS) $(DEFAULT_INCLUDES) $(INCLUDES) $(liblzma_la_CPPFLAGS) $(CPPFLAGS) $(AM_CFLAGS) $(CFLAGS) -c -o liblzma_la-alone_decoder.lo `test -f 'common/alone_decoder.c' || echo '$(srcdir)/'`common/alone_decoder.c
+
+liblzma_la-auto_decoder.lo: common/auto_decoder.c
+@am__fastdepCC_TRUE@ $(LIBTOOL) --tag=CC $(AM_LIBTOOLFLAGS) $(LIBTOOLFLAGS) --mode=compile $(CC) $(DEFS) $(DEFAULT_INCLUDES) $(INCLUDES) $(liblzma_la_CPPFLAGS) $(CPPFLAGS) $(AM_CFLAGS) $(CFLAGS) -MT liblzma_la-auto_decoder.lo -MD -MP -MF $(DEPDIR)/liblzma_la-auto_decoder.Tpo -c -o liblzma_la-auto_decoder.lo `test -f 'common/auto_decoder.c' || echo '$(srcdir)/'`common/auto_decoder.c
+@am__fastdepCC_TRUE@ $(am__mv) $(DEPDIR)/liblzma_la-auto_decoder.Tpo $(DEPDIR)/liblzma_la-auto_decoder.Plo
+@AMDEP_TRUE@@am__fastdepCC_FALSE@ source='common/auto_decoder.c' object='liblzma_la-auto_decoder.lo' libtool=yes @AMDEPBACKSLASH@
+@AMDEP_TRUE@@am__fastdepCC_FALSE@ DEPDIR=$(DEPDIR) $(CCDEPMODE) $(depcomp) @AMDEPBACKSLASH@
+@am__fastdepCC_FALSE@ $(LIBTOOL) --tag=CC $(AM_LIBTOOLFLAGS) $(LIBTOOLFLAGS) --mode=compile $(CC) $(DEFS) $(DEFAULT_INCLUDES) $(INCLUDES) $(liblzma_la_CPPFLAGS) $(CPPFLAGS) $(AM_CFLAGS) $(CFLAGS) -c -o liblzma_la-auto_decoder.lo `test -f 'common/auto_decoder.c' || echo '$(srcdir)/'`common/auto_decoder.c
+
+liblzma_la-block_buffer_decoder.lo: common/block_buffer_decoder.c
+@am__fastdepCC_TRUE@ $(LIBTOOL) --tag=CC $(AM_LIBTOOLFLAGS) $(LIBTOOLFLAGS) --mode=compile $(CC) $(DEFS) $(DEFAULT_INCLUDES) $(INCLUDES) $(liblzma_la_CPPFLAGS) $(CPPFLAGS) $(AM_CFLAGS) $(CFLAGS) -MT liblzma_la-block_buffer_decoder.lo -MD -MP -MF $(DEPDIR)/liblzma_la-block_buffer_decoder.Tpo -c -o liblzma_la-block_buffer_decoder.lo `test -f 'common/block_buffer_decoder.c' || echo '$(srcdir)/'`common/block_buffer_decoder.c
+@am__fastdepCC_TRUE@ $(am__mv) $(DEPDIR)/liblzma_la-block_buffer_decoder.Tpo $(DEPDIR)/liblzma_la-block_buffer_decoder.Plo
+@AMDEP_TRUE@@am__fastdepCC_FALSE@ source='common/block_buffer_decoder.c' object='liblzma_la-block_buffer_decoder.lo' libtool=yes @AMDEPBACKSLASH@
+@AMDEP_TRUE@@am__fastdepCC_FALSE@ DEPDIR=$(DEPDIR) $(CCDEPMODE) $(depcomp) @AMDEPBACKSLASH@
+@am__fastdepCC_FALSE@ $(LIBTOOL) --tag=CC $(AM_LIBTOOLFLAGS) $(LIBTOOLFLAGS) --mode=compile $(CC) $(DEFS) $(DEFAULT_INCLUDES) $(INCLUDES) $(liblzma_la_CPPFLAGS) $(CPPFLAGS) $(AM_CFLAGS) $(CFLAGS) -c -o liblzma_la-block_buffer_decoder.lo `test -f 'common/block_buffer_decoder.c' || echo '$(srcdir)/'`common/block_buffer_decoder.c
+
+liblzma_la-block_decoder.lo: common/block_decoder.c
+@am__fastdepCC_TRUE@ $(LIBTOOL) --tag=CC $(AM_LIBTOOLFLAGS) $(LIBTOOLFLAGS) --mode=compile $(CC) $(DEFS) $(DEFAULT_INCLUDES) $(INCLUDES) $(liblzma_la_CPPFLAGS) $(CPPFLAGS) $(AM_CFLAGS) $(CFLAGS) -MT liblzma_la-block_decoder.lo -MD -MP -MF $(DEPDIR)/liblzma_la-block_decoder.Tpo -c -o liblzma_la-block_decoder.lo `test -f 'common/block_decoder.c' || echo '$(srcdir)/'`common/block_decoder.c
+@am__fastdepCC_TRUE@ $(am__mv) $(DEPDIR)/liblzma_la-block_decoder.Tpo $(DEPDIR)/liblzma_la-block_decoder.Plo
+@AMDEP_TRUE@@am__fastdepCC_FALSE@ source='common/block_decoder.c' object='liblzma_la-block_decoder.lo' libtool=yes @AMDEPBACKSLASH@
+@AMDEP_TRUE@@am__fastdepCC_FALSE@ DEPDIR=$(DEPDIR) $(CCDEPMODE) $(depcomp) @AMDEPBACKSLASH@
+@am__fastdepCC_FALSE@ $(LIBTOOL) --tag=CC $(AM_LIBTOOLFLAGS) $(LIBTOOLFLAGS) --mode=compile $(CC) $(DEFS) $(DEFAULT_INCLUDES) $(INCLUDES) $(liblzma_la_CPPFLAGS) $(CPPFLAGS) $(AM_CFLAGS) $(CFLAGS) -c -o liblzma_la-block_decoder.lo `test -f 'common/block_decoder.c' || echo '$(srcdir)/'`common/block_decoder.c
+
+liblzma_la-block_header_decoder.lo: common/block_header_decoder.c
+@am__fastdepCC_TRUE@ $(LIBTOOL) --tag=CC $(AM_LIBTOOLFLAGS) $(LIBTOOLFLAGS) --mode=compile $(CC) $(DEFS) $(DEFAULT_INCLUDES) $(INCLUDES) $(liblzma_la_CPPFLAGS) $(CPPFLAGS) $(AM_CFLAGS) $(CFLAGS) -MT liblzma_la-block_header_decoder.lo -MD -MP -MF $(DEPDIR)/liblzma_la-block_header_decoder.Tpo -c -o liblzma_la-block_header_decoder.lo `test -f 'common/block_header_decoder.c' || echo '$(srcdir)/'`common/block_header_decoder.c
+@am__fastdepCC_TRUE@ $(am__mv) $(DEPDIR)/liblzma_la-block_header_decoder.Tpo $(DEPDIR)/liblzma_la-block_header_decoder.Plo
+@AMDEP_TRUE@@am__fastdepCC_FALSE@ source='common/block_header_decoder.c' object='liblzma_la-block_header_decoder.lo' libtool=yes @AMDEPBACKSLASH@
+@AMDEP_TRUE@@am__fastdepCC_FALSE@ DEPDIR=$(DEPDIR) $(CCDEPMODE) $(depcomp) @AMDEPBACKSLASH@
+@am__fastdepCC_FALSE@ $(LIBTOOL) --tag=CC $(AM_LIBTOOLFLAGS) $(LIBTOOLFLAGS) --mode=compile $(CC) $(DEFS) $(DEFAULT_INCLUDES) $(INCLUDES) $(liblzma_la_CPPFLAGS) $(CPPFLAGS) $(AM_CFLAGS) $(CFLAGS) -c -o liblzma_la-block_header_decoder.lo `test -f 'common/block_header_decoder.c' || echo '$(srcdir)/'`common/block_header_decoder.c
+
+liblzma_la-easy_decoder_memusage.lo: common/easy_decoder_memusage.c
+@am__fastdepCC_TRUE@ $(LIBTOOL) --tag=CC $(AM_LIBTOOLFLAGS) $(LIBTOOLFLAGS) --mode=compile $(CC) $(DEFS) $(DEFAULT_INCLUDES) $(INCLUDES) $(liblzma_la_CPPFLAGS) $(CPPFLAGS) $(AM_CFLAGS) $(CFLAGS) -MT liblzma_la-easy_decoder_memusage.lo -MD -MP -MF $(DEPDIR)/liblzma_la-easy_decoder_memusage.Tpo -c -o liblzma_la-easy_decoder_memusage.lo `test -f 'common/easy_decoder_memusage.c' || echo '$(srcdir)/'`common/easy_decoder_memusage.c
+@am__fastdepCC_TRUE@ $(am__mv) $(DEPDIR)/liblzma_la-easy_decoder_memusage.Tpo $(DEPDIR)/liblzma_la-easy_decoder_memusage.Plo
+@AMDEP_TRUE@@am__fastdepCC_FALSE@ source='common/easy_decoder_memusage.c' object='liblzma_la-easy_decoder_memusage.lo' libtool=yes @AMDEPBACKSLASH@
+@AMDEP_TRUE@@am__fastdepCC_FALSE@ DEPDIR=$(DEPDIR) $(CCDEPMODE) $(depcomp) @AMDEPBACKSLASH@
+@am__fastdepCC_FALSE@ $(LIBTOOL) --tag=CC $(AM_LIBTOOLFLAGS) $(LIBTOOLFLAGS) --mode=compile $(CC) $(DEFS) $(DEFAULT_INCLUDES) $(INCLUDES) $(liblzma_la_CPPFLAGS) $(CPPFLAGS) $(AM_CFLAGS) $(CFLAGS) -c -o liblzma_la-easy_decoder_memusage.lo `test -f 'common/easy_decoder_memusage.c' || echo '$(srcdir)/'`common/easy_decoder_memusage.c
+
+liblzma_la-filter_buffer_decoder.lo: common/filter_buffer_decoder.c
+@am__fastdepCC_TRUE@ $(LIBTOOL) --tag=CC $(AM_LIBTOOLFLAGS) $(LIBTOOLFLAGS) --mode=compile $(CC) $(DEFS) $(DEFAULT_INCLUDES) $(INCLUDES) $(liblzma_la_CPPFLAGS) $(CPPFLAGS) $(AM_CFLAGS) $(CFLAGS) -MT liblzma_la-filter_buffer_decoder.lo -MD -MP -MF $(DEPDIR)/liblzma_la-filter_buffer_decoder.Tpo -c -o liblzma_la-filter_buffer_decoder.lo `test -f 'common/filter_buffer_decoder.c' || echo '$(srcdir)/'`common/filter_buffer_decoder.c
+@am__fastdepCC_TRUE@ $(am__mv) $(DEPDIR)/liblzma_la-filter_buffer_decoder.Tpo $(DEPDIR)/liblzma_la-filter_buffer_decoder.Plo
+@AMDEP_TRUE@@am__fastdepCC_FALSE@ source='common/filter_buffer_decoder.c' object='liblzma_la-filter_buffer_decoder.lo' libtool=yes @AMDEPBACKSLASH@
+@AMDEP_TRUE@@am__fastdepCC_FALSE@ DEPDIR=$(DEPDIR) $(CCDEPMODE) $(depcomp) @AMDEPBACKSLASH@
+@am__fastdepCC_FALSE@ $(LIBTOOL) --tag=CC $(AM_LIBTOOLFLAGS) $(LIBTOOLFLAGS) --mode=compile $(CC) $(DEFS) $(DEFAULT_INCLUDES) $(INCLUDES) $(liblzma_la_CPPFLAGS) $(CPPFLAGS) $(AM_CFLAGS) $(CFLAGS) -c -o liblzma_la-filter_buffer_decoder.lo `test -f 'common/filter_buffer_decoder.c' || echo '$(srcdir)/'`common/filter_buffer_decoder.c
+
+liblzma_la-filter_decoder.lo: common/filter_decoder.c
+@am__fastdepCC_TRUE@ $(LIBTOOL) --tag=CC $(AM_LIBTOOLFLAGS) $(LIBTOOLFLAGS) --mode=compile $(CC) $(DEFS) $(DEFAULT_INCLUDES) $(INCLUDES) $(liblzma_la_CPPFLAGS) $(CPPFLAGS) $(AM_CFLAGS) $(CFLAGS) -MT liblzma_la-filter_decoder.lo -MD -MP -MF $(DEPDIR)/liblzma_la-filter_decoder.Tpo -c -o liblzma_la-filter_decoder.lo `test -f 'common/filter_decoder.c' || echo '$(srcdir)/'`common/filter_decoder.c
+@am__fastdepCC_TRUE@ $(am__mv) $(DEPDIR)/liblzma_la-filter_decoder.Tpo $(DEPDIR)/liblzma_la-filter_decoder.Plo
+@AMDEP_TRUE@@am__fastdepCC_FALSE@ source='common/filter_decoder.c' object='liblzma_la-filter_decoder.lo' libtool=yes @AMDEPBACKSLASH@
+@AMDEP_TRUE@@am__fastdepCC_FALSE@ DEPDIR=$(DEPDIR) $(CCDEPMODE) $(depcomp) @AMDEPBACKSLASH@
+@am__fastdepCC_FALSE@ $(LIBTOOL) --tag=CC $(AM_LIBTOOLFLAGS) $(LIBTOOLFLAGS) --mode=compile $(CC) $(DEFS) $(DEFAULT_INCLUDES) $(INCLUDES) $(liblzma_la_CPPFLAGS) $(CPPFLAGS) $(AM_CFLAGS) $(CFLAGS) -c -o liblzma_la-filter_decoder.lo `test -f 'common/filter_decoder.c' || echo '$(srcdir)/'`common/filter_decoder.c
+
+liblzma_la-filter_flags_decoder.lo: common/filter_flags_decoder.c
+@am__fastdepCC_TRUE@ $(LIBTOOL) --tag=CC $(AM_LIBTOOLFLAGS) $(LIBTOOLFLAGS) --mode=compile $(CC) $(DEFS) $(DEFAULT_INCLUDES) $(INCLUDES) $(liblzma_la_CPPFLAGS) $(CPPFLAGS) $(AM_CFLAGS) $(CFLAGS) -MT liblzma_la-filter_flags_decoder.lo -MD -MP -MF $(DEPDIR)/liblzma_la-filter_flags_decoder.Tpo -c -o liblzma_la-filter_flags_decoder.lo `test -f 'common/filter_flags_decoder.c' || echo '$(srcdir)/'`common/filter_flags_decoder.c
+@am__fastdepCC_TRUE@ $(am__mv) $(DEPDIR)/liblzma_la-filter_flags_decoder.Tpo $(DEPDIR)/liblzma_la-filter_flags_decoder.Plo
+@AMDEP_TRUE@@am__fastdepCC_FALSE@ source='common/filter_flags_decoder.c' object='liblzma_la-filter_flags_decoder.lo' libtool=yes @AMDEPBACKSLASH@
+@AMDEP_TRUE@@am__fastdepCC_FALSE@ DEPDIR=$(DEPDIR) $(CCDEPMODE) $(depcomp) @AMDEPBACKSLASH@
+@am__fastdepCC_FALSE@ $(LIBTOOL) --tag=CC $(AM_LIBTOOLFLAGS) $(LIBTOOLFLAGS) --mode=compile $(CC) $(DEFS) $(DEFAULT_INCLUDES) $(INCLUDES) $(liblzma_la_CPPFLAGS) $(CPPFLAGS) $(AM_CFLAGS) $(CFLAGS) -c -o liblzma_la-filter_flags_decoder.lo `test -f 'common/filter_flags_decoder.c' || echo '$(srcdir)/'`common/filter_flags_decoder.c
+
+liblzma_la-index_decoder.lo: common/index_decoder.c
+@am__fastdepCC_TRUE@ $(LIBTOOL) --tag=CC $(AM_LIBTOOLFLAGS) $(LIBTOOLFLAGS) --mode=compile $(CC) $(DEFS) $(DEFAULT_INCLUDES) $(INCLUDES) $(liblzma_la_CPPFLAGS) $(CPPFLAGS) $(AM_CFLAGS) $(CFLAGS) -MT liblzma_la-index_decoder.lo -MD -MP -MF $(DEPDIR)/liblzma_la-index_decoder.Tpo -c -o liblzma_la-index_decoder.lo `test -f 'common/index_decoder.c' || echo '$(srcdir)/'`common/index_decoder.c
+@am__fastdepCC_TRUE@ $(am__mv) $(DEPDIR)/liblzma_la-index_decoder.Tpo $(DEPDIR)/liblzma_la-index_decoder.Plo
+@AMDEP_TRUE@@am__fastdepCC_FALSE@ source='common/index_decoder.c' object='liblzma_la-index_decoder.lo' libtool=yes @AMDEPBACKSLASH@
+@AMDEP_TRUE@@am__fastdepCC_FALSE@ DEPDIR=$(DEPDIR) $(CCDEPMODE) $(depcomp) @AMDEPBACKSLASH@
+@am__fastdepCC_FALSE@ $(LIBTOOL) --tag=CC $(AM_LIBTOOLFLAGS) $(LIBTOOLFLAGS) --mode=compile $(CC) $(DEFS) $(DEFAULT_INCLUDES) $(INCLUDES) $(liblzma_la_CPPFLAGS) $(CPPFLAGS) $(AM_CFLAGS) $(CFLAGS) -c -o liblzma_la-index_decoder.lo `test -f 'common/index_decoder.c' || echo '$(srcdir)/'`common/index_decoder.c
+
+liblzma_la-index_hash.lo: common/index_hash.c
+@am__fastdepCC_TRUE@ $(LIBTOOL) --tag=CC $(AM_LIBTOOLFLAGS) $(LIBTOOLFLAGS) --mode=compile $(CC) $(DEFS) $(DEFAULT_INCLUDES) $(INCLUDES) $(liblzma_la_CPPFLAGS) $(CPPFLAGS) $(AM_CFLAGS) $(CFLAGS) -MT liblzma_la-index_hash.lo -MD -MP -MF $(DEPDIR)/liblzma_la-index_hash.Tpo -c -o liblzma_la-index_hash.lo `test -f 'common/index_hash.c' || echo '$(srcdir)/'`common/index_hash.c
+@am__fastdepCC_TRUE@ $(am__mv) $(DEPDIR)/liblzma_la-index_hash.Tpo $(DEPDIR)/liblzma_la-index_hash.Plo
+@AMDEP_TRUE@@am__fastdepCC_FALSE@ source='common/index_hash.c' object='liblzma_la-index_hash.lo' libtool=yes @AMDEPBACKSLASH@
+@AMDEP_TRUE@@am__fastdepCC_FALSE@ DEPDIR=$(DEPDIR) $(CCDEPMODE) $(depcomp) @AMDEPBACKSLASH@
+@am__fastdepCC_FALSE@ $(LIBTOOL) --tag=CC $(AM_LIBTOOLFLAGS) $(LIBTOOLFLAGS) --mode=compile $(CC) $(DEFS) $(DEFAULT_INCLUDES) $(INCLUDES) $(liblzma_la_CPPFLAGS) $(CPPFLAGS) $(AM_CFLAGS) $(CFLAGS) -c -o liblzma_la-index_hash.lo `test -f 'common/index_hash.c' || echo '$(srcdir)/'`common/index_hash.c
+
+liblzma_la-stream_buffer_decoder.lo: common/stream_buffer_decoder.c
+@am__fastdepCC_TRUE@ $(LIBTOOL) --tag=CC $(AM_LIBTOOLFLAGS) $(LIBTOOLFLAGS) --mode=compile $(CC) $(DEFS) $(DEFAULT_INCLUDES) $(INCLUDES) $(liblzma_la_CPPFLAGS) $(CPPFLAGS) $(AM_CFLAGS) $(CFLAGS) -MT liblzma_la-stream_buffer_decoder.lo -MD -MP -MF $(DEPDIR)/liblzma_la-stream_buffer_decoder.Tpo -c -o liblzma_la-stream_buffer_decoder.lo `test -f 'common/stream_buffer_decoder.c' || echo '$(srcdir)/'`common/stream_buffer_decoder.c
+@am__fastdepCC_TRUE@ $(am__mv) $(DEPDIR)/liblzma_la-stream_buffer_decoder.Tpo $(DEPDIR)/liblzma_la-stream_buffer_decoder.Plo
+@AMDEP_TRUE@@am__fastdepCC_FALSE@ source='common/stream_buffer_decoder.c' object='liblzma_la-stream_buffer_decoder.lo' libtool=yes @AMDEPBACKSLASH@
+@AMDEP_TRUE@@am__fastdepCC_FALSE@ DEPDIR=$(DEPDIR) $(CCDEPMODE) $(depcomp) @AMDEPBACKSLASH@
+@am__fastdepCC_FALSE@ $(LIBTOOL) --tag=CC $(AM_LIBTOOLFLAGS) $(LIBTOOLFLAGS) --mode=compile $(CC) $(DEFS) $(DEFAULT_INCLUDES) $(INCLUDES) $(liblzma_la_CPPFLAGS) $(CPPFLAGS) $(AM_CFLAGS) $(CFLAGS) -c -o liblzma_la-stream_buffer_decoder.lo `test -f 'common/stream_buffer_decoder.c' || echo '$(srcdir)/'`common/stream_buffer_decoder.c
+
+liblzma_la-stream_decoder.lo: common/stream_decoder.c
+@am__fastdepCC_TRUE@ $(LIBTOOL) --tag=CC $(AM_LIBTOOLFLAGS) $(LIBTOOLFLAGS) --mode=compile $(CC) $(DEFS) $(DEFAULT_INCLUDES) $(INCLUDES) $(liblzma_la_CPPFLAGS) $(CPPFLAGS) $(AM_CFLAGS) $(CFLAGS) -MT liblzma_la-stream_decoder.lo -MD -MP -MF $(DEPDIR)/liblzma_la-stream_decoder.Tpo -c -o liblzma_la-stream_decoder.lo `test -f 'common/stream_decoder.c' || echo '$(srcdir)/'`common/stream_decoder.c
+@am__fastdepCC_TRUE@ $(am__mv) $(DEPDIR)/liblzma_la-stream_decoder.Tpo $(DEPDIR)/liblzma_la-stream_decoder.Plo
+@AMDEP_TRUE@@am__fastdepCC_FALSE@ source='common/stream_decoder.c' object='liblzma_la-stream_decoder.lo' libtool=yes @AMDEPBACKSLASH@
+@AMDEP_TRUE@@am__fastdepCC_FALSE@ DEPDIR=$(DEPDIR) $(CCDEPMODE) $(depcomp) @AMDEPBACKSLASH@
+@am__fastdepCC_FALSE@ $(LIBTOOL) --tag=CC $(AM_LIBTOOLFLAGS) $(LIBTOOLFLAGS) --mode=compile $(CC) $(DEFS) $(DEFAULT_INCLUDES) $(INCLUDES) $(liblzma_la_CPPFLAGS) $(CPPFLAGS) $(AM_CFLAGS) $(CFLAGS) -c -o liblzma_la-stream_decoder.lo `test -f 'common/stream_decoder.c' || echo '$(srcdir)/'`common/stream_decoder.c
+
+liblzma_la-stream_flags_decoder.lo: common/stream_flags_decoder.c
+@am__fastdepCC_TRUE@ $(LIBTOOL) --tag=CC $(AM_LIBTOOLFLAGS) $(LIBTOOLFLAGS) --mode=compile $(CC) $(DEFS) $(DEFAULT_INCLUDES) $(INCLUDES) $(liblzma_la_CPPFLAGS) $(CPPFLAGS) $(AM_CFLAGS) $(CFLAGS) -MT liblzma_la-stream_flags_decoder.lo -MD -MP -MF $(DEPDIR)/liblzma_la-stream_flags_decoder.Tpo -c -o liblzma_la-stream_flags_decoder.lo `test -f 'common/stream_flags_decoder.c' || echo '$(srcdir)/'`common/stream_flags_decoder.c
+@am__fastdepCC_TRUE@ $(am__mv) $(DEPDIR)/liblzma_la-stream_flags_decoder.Tpo $(DEPDIR)/liblzma_la-stream_flags_decoder.Plo
+@AMDEP_TRUE@@am__fastdepCC_FALSE@ source='common/stream_flags_decoder.c' object='liblzma_la-stream_flags_decoder.lo' libtool=yes @AMDEPBACKSLASH@
+@AMDEP_TRUE@@am__fastdepCC_FALSE@ DEPDIR=$(DEPDIR) $(CCDEPMODE) $(depcomp) @AMDEPBACKSLASH@
+@am__fastdepCC_FALSE@ $(LIBTOOL) --tag=CC $(AM_LIBTOOLFLAGS) $(LIBTOOLFLAGS) --mode=compile $(CC) $(DEFS) $(DEFAULT_INCLUDES) $(INCLUDES) $(liblzma_la_CPPFLAGS) $(CPPFLAGS) $(AM_CFLAGS) $(CFLAGS) -c -o liblzma_la-stream_flags_decoder.lo `test -f 'common/stream_flags_decoder.c' || echo '$(srcdir)/'`common/stream_flags_decoder.c
+
+liblzma_la-vli_decoder.lo: common/vli_decoder.c
+@am__fastdepCC_TRUE@ $(LIBTOOL) --tag=CC $(AM_LIBTOOLFLAGS) $(LIBTOOLFLAGS) --mode=compile $(CC) $(DEFS) $(DEFAULT_INCLUDES) $(INCLUDES) $(liblzma_la_CPPFLAGS) $(CPPFLAGS) $(AM_CFLAGS) $(CFLAGS) -MT liblzma_la-vli_decoder.lo -MD -MP -MF $(DEPDIR)/liblzma_la-vli_decoder.Tpo -c -o liblzma_la-vli_decoder.lo `test -f 'common/vli_decoder.c' || echo '$(srcdir)/'`common/vli_decoder.c
+@am__fastdepCC_TRUE@ $(am__mv) $(DEPDIR)/liblzma_la-vli_decoder.Tpo $(DEPDIR)/liblzma_la-vli_decoder.Plo
+@AMDEP_TRUE@@am__fastdepCC_FALSE@ source='common/vli_decoder.c' object='liblzma_la-vli_decoder.lo' libtool=yes @AMDEPBACKSLASH@
+@AMDEP_TRUE@@am__fastdepCC_FALSE@ DEPDIR=$(DEPDIR) $(CCDEPMODE) $(depcomp) @AMDEPBACKSLASH@
+@am__fastdepCC_FALSE@ $(LIBTOOL) --tag=CC $(AM_LIBTOOLFLAGS) $(LIBTOOLFLAGS) --mode=compile $(CC) $(DEFS) $(DEFAULT_INCLUDES) $(INCLUDES) $(liblzma_la_CPPFLAGS) $(CPPFLAGS) $(AM_CFLAGS) $(CFLAGS) -c -o liblzma_la-vli_decoder.lo `test -f 'common/vli_decoder.c' || echo '$(srcdir)/'`common/vli_decoder.c
+
+liblzma_la-check.lo: check/check.c
+@am__fastdepCC_TRUE@ $(LIBTOOL) --tag=CC $(AM_LIBTOOLFLAGS) $(LIBTOOLFLAGS) --mode=compile $(CC) $(DEFS) $(DEFAULT_INCLUDES) $(INCLUDES) $(liblzma_la_CPPFLAGS) $(CPPFLAGS) $(AM_CFLAGS) $(CFLAGS) -MT liblzma_la-check.lo -MD -MP -MF $(DEPDIR)/liblzma_la-check.Tpo -c -o liblzma_la-check.lo `test -f 'check/check.c' || echo '$(srcdir)/'`check/check.c
+@am__fastdepCC_TRUE@ $(am__mv) $(DEPDIR)/liblzma_la-check.Tpo $(DEPDIR)/liblzma_la-check.Plo
+@AMDEP_TRUE@@am__fastdepCC_FALSE@ source='check/check.c' object='liblzma_la-check.lo' libtool=yes @AMDEPBACKSLASH@
+@AMDEP_TRUE@@am__fastdepCC_FALSE@ DEPDIR=$(DEPDIR) $(CCDEPMODE) $(depcomp) @AMDEPBACKSLASH@
+@am__fastdepCC_FALSE@ $(LIBTOOL) --tag=CC $(AM_LIBTOOLFLAGS) $(LIBTOOLFLAGS) --mode=compile $(CC) $(DEFS) $(DEFAULT_INCLUDES) $(INCLUDES) $(liblzma_la_CPPFLAGS) $(CPPFLAGS) $(AM_CFLAGS) $(CFLAGS) -c -o liblzma_la-check.lo `test -f 'check/check.c' || echo '$(srcdir)/'`check/check.c
+
+liblzma_la-crc32_small.lo: check/crc32_small.c
+@am__fastdepCC_TRUE@ $(LIBTOOL) --tag=CC $(AM_LIBTOOLFLAGS) $(LIBTOOLFLAGS) --mode=compile $(CC) $(DEFS) $(DEFAULT_INCLUDES) $(INCLUDES) $(liblzma_la_CPPFLAGS) $(CPPFLAGS) $(AM_CFLAGS) $(CFLAGS) -MT liblzma_la-crc32_small.lo -MD -MP -MF $(DEPDIR)/liblzma_la-crc32_small.Tpo -c -o liblzma_la-crc32_small.lo `test -f 'check/crc32_small.c' || echo '$(srcdir)/'`check/crc32_small.c
+@am__fastdepCC_TRUE@ $(am__mv) $(DEPDIR)/liblzma_la-crc32_small.Tpo $(DEPDIR)/liblzma_la-crc32_small.Plo
+@AMDEP_TRUE@@am__fastdepCC_FALSE@ source='check/crc32_small.c' object='liblzma_la-crc32_small.lo' libtool=yes @AMDEPBACKSLASH@
+@AMDEP_TRUE@@am__fastdepCC_FALSE@ DEPDIR=$(DEPDIR) $(CCDEPMODE) $(depcomp) @AMDEPBACKSLASH@
+@am__fastdepCC_FALSE@ $(LIBTOOL) --tag=CC $(AM_LIBTOOLFLAGS) $(LIBTOOLFLAGS) --mode=compile $(CC) $(DEFS) $(DEFAULT_INCLUDES) $(INCLUDES) $(liblzma_la_CPPFLAGS) $(CPPFLAGS) $(AM_CFLAGS) $(CFLAGS) -c -o liblzma_la-crc32_small.lo `test -f 'check/crc32_small.c' || echo '$(srcdir)/'`check/crc32_small.c
+
+liblzma_la-crc32_table.lo: check/crc32_table.c
+@am__fastdepCC_TRUE@ $(LIBTOOL) --tag=CC $(AM_LIBTOOLFLAGS) $(LIBTOOLFLAGS) --mode=compile $(CC) $(DEFS) $(DEFAULT_INCLUDES) $(INCLUDES) $(liblzma_la_CPPFLAGS) $(CPPFLAGS) $(AM_CFLAGS) $(CFLAGS) -MT liblzma_la-crc32_table.lo -MD -MP -MF $(DEPDIR)/liblzma_la-crc32_table.Tpo -c -o liblzma_la-crc32_table.lo `test -f 'check/crc32_table.c' || echo '$(srcdir)/'`check/crc32_table.c
+@am__fastdepCC_TRUE@ $(am__mv) $(DEPDIR)/liblzma_la-crc32_table.Tpo $(DEPDIR)/liblzma_la-crc32_table.Plo
+@AMDEP_TRUE@@am__fastdepCC_FALSE@ source='check/crc32_table.c' object='liblzma_la-crc32_table.lo' libtool=yes @AMDEPBACKSLASH@
+@AMDEP_TRUE@@am__fastdepCC_FALSE@ DEPDIR=$(DEPDIR) $(CCDEPMODE) $(depcomp) @AMDEPBACKSLASH@
+@am__fastdepCC_FALSE@ $(LIBTOOL) --tag=CC $(AM_LIBTOOLFLAGS) $(LIBTOOLFLAGS) --mode=compile $(CC) $(DEFS) $(DEFAULT_INCLUDES) $(INCLUDES) $(liblzma_la_CPPFLAGS) $(CPPFLAGS) $(AM_CFLAGS) $(CFLAGS) -c -o liblzma_la-crc32_table.lo `test -f 'check/crc32_table.c' || echo '$(srcdir)/'`check/crc32_table.c
+
+liblzma_la-crc32_fast.lo: check/crc32_fast.c
+@am__fastdepCC_TRUE@ $(LIBTOOL) --tag=CC $(AM_LIBTOOLFLAGS) $(LIBTOOLFLAGS) --mode=compile $(CC) $(DEFS) $(DEFAULT_INCLUDES) $(INCLUDES) $(liblzma_la_CPPFLAGS) $(CPPFLAGS) $(AM_CFLAGS) $(CFLAGS) -MT liblzma_la-crc32_fast.lo -MD -MP -MF $(DEPDIR)/liblzma_la-crc32_fast.Tpo -c -o liblzma_la-crc32_fast.lo `test -f 'check/crc32_fast.c' || echo '$(srcdir)/'`check/crc32_fast.c
+@am__fastdepCC_TRUE@ $(am__mv) $(DEPDIR)/liblzma_la-crc32_fast.Tpo $(DEPDIR)/liblzma_la-crc32_fast.Plo
+@AMDEP_TRUE@@am__fastdepCC_FALSE@ source='check/crc32_fast.c' object='liblzma_la-crc32_fast.lo' libtool=yes @AMDEPBACKSLASH@
+@AMDEP_TRUE@@am__fastdepCC_FALSE@ DEPDIR=$(DEPDIR) $(CCDEPMODE) $(depcomp) @AMDEPBACKSLASH@
+@am__fastdepCC_FALSE@ $(LIBTOOL) --tag=CC $(AM_LIBTOOLFLAGS) $(LIBTOOLFLAGS) --mode=compile $(CC) $(DEFS) $(DEFAULT_INCLUDES) $(INCLUDES) $(liblzma_la_CPPFLAGS) $(CPPFLAGS) $(AM_CFLAGS) $(CFLAGS) -c -o liblzma_la-crc32_fast.lo `test -f 'check/crc32_fast.c' || echo '$(srcdir)/'`check/crc32_fast.c
+
+liblzma_la-crc64_small.lo: check/crc64_small.c
+@am__fastdepCC_TRUE@ $(LIBTOOL) --tag=CC $(AM_LIBTOOLFLAGS) $(LIBTOOLFLAGS) --mode=compile $(CC) $(DEFS) $(DEFAULT_INCLUDES) $(INCLUDES) $(liblzma_la_CPPFLAGS) $(CPPFLAGS) $(AM_CFLAGS) $(CFLAGS) -MT liblzma_la-crc64_small.lo -MD -MP -MF $(DEPDIR)/liblzma_la-crc64_small.Tpo -c -o liblzma_la-crc64_small.lo `test -f 'check/crc64_small.c' || echo '$(srcdir)/'`check/crc64_small.c
+@am__fastdepCC_TRUE@ $(am__mv) $(DEPDIR)/liblzma_la-crc64_small.Tpo $(DEPDIR)/liblzma_la-crc64_small.Plo
+@AMDEP_TRUE@@am__fastdepCC_FALSE@ source='check/crc64_small.c' object='liblzma_la-crc64_small.lo' libtool=yes @AMDEPBACKSLASH@
+@AMDEP_TRUE@@am__fastdepCC_FALSE@ DEPDIR=$(DEPDIR) $(CCDEPMODE) $(depcomp) @AMDEPBACKSLASH@
+@am__fastdepCC_FALSE@ $(LIBTOOL) --tag=CC $(AM_LIBTOOLFLAGS) $(LIBTOOLFLAGS) --mode=compile $(CC) $(DEFS) $(DEFAULT_INCLUDES) $(INCLUDES) $(liblzma_la_CPPFLAGS) $(CPPFLAGS) $(AM_CFLAGS) $(CFLAGS) -c -o liblzma_la-crc64_small.lo `test -f 'check/crc64_small.c' || echo '$(srcdir)/'`check/crc64_small.c
+
+liblzma_la-crc64_table.lo: check/crc64_table.c
+@am__fastdepCC_TRUE@ $(LIBTOOL) --tag=CC $(AM_LIBTOOLFLAGS) $(LIBTOOLFLAGS) --mode=compile $(CC) $(DEFS) $(DEFAULT_INCLUDES) $(INCLUDES) $(liblzma_la_CPPFLAGS) $(CPPFLAGS) $(AM_CFLAGS) $(CFLAGS) -MT liblzma_la-crc64_table.lo -MD -MP -MF $(DEPDIR)/liblzma_la-crc64_table.Tpo -c -o liblzma_la-crc64_table.lo `test -f 'check/crc64_table.c' || echo '$(srcdir)/'`check/crc64_table.c
+@am__fastdepCC_TRUE@ $(am__mv) $(DEPDIR)/liblzma_la-crc64_table.Tpo $(DEPDIR)/liblzma_la-crc64_table.Plo
+@AMDEP_TRUE@@am__fastdepCC_FALSE@ source='check/crc64_table.c' object='liblzma_la-crc64_table.lo' libtool=yes @AMDEPBACKSLASH@
+@AMDEP_TRUE@@am__fastdepCC_FALSE@ DEPDIR=$(DEPDIR) $(CCDEPMODE) $(depcomp) @AMDEPBACKSLASH@
+@am__fastdepCC_FALSE@ $(LIBTOOL) --tag=CC $(AM_LIBTOOLFLAGS) $(LIBTOOLFLAGS) --mode=compile $(CC) $(DEFS) $(DEFAULT_INCLUDES) $(INCLUDES) $(liblzma_la_CPPFLAGS) $(CPPFLAGS) $(AM_CFLAGS) $(CFLAGS) -c -o liblzma_la-crc64_table.lo `test -f 'check/crc64_table.c' || echo '$(srcdir)/'`check/crc64_table.c
+
+liblzma_la-crc64_fast.lo: check/crc64_fast.c
+@am__fastdepCC_TRUE@ $(LIBTOOL) --tag=CC $(AM_LIBTOOLFLAGS) $(LIBTOOLFLAGS) --mode=compile $(CC) $(DEFS) $(DEFAULT_INCLUDES) $(INCLUDES) $(liblzma_la_CPPFLAGS) $(CPPFLAGS) $(AM_CFLAGS) $(CFLAGS) -MT liblzma_la-crc64_fast.lo -MD -MP -MF $(DEPDIR)/liblzma_la-crc64_fast.Tpo -c -o liblzma_la-crc64_fast.lo `test -f 'check/crc64_fast.c' || echo '$(srcdir)/'`check/crc64_fast.c
+@am__fastdepCC_TRUE@ $(am__mv) $(DEPDIR)/liblzma_la-crc64_fast.Tpo $(DEPDIR)/liblzma_la-crc64_fast.Plo
+@AMDEP_TRUE@@am__fastdepCC_FALSE@ source='check/crc64_fast.c' object='liblzma_la-crc64_fast.lo' libtool=yes @AMDEPBACKSLASH@
+@AMDEP_TRUE@@am__fastdepCC_FALSE@ DEPDIR=$(DEPDIR) $(CCDEPMODE) $(depcomp) @AMDEPBACKSLASH@
+@am__fastdepCC_FALSE@ $(LIBTOOL) --tag=CC $(AM_LIBTOOLFLAGS) $(LIBTOOLFLAGS) --mode=compile $(CC) $(DEFS) $(DEFAULT_INCLUDES) $(INCLUDES) $(liblzma_la_CPPFLAGS) $(CPPFLAGS) $(AM_CFLAGS) $(CFLAGS) -c -o liblzma_la-crc64_fast.lo `test -f 'check/crc64_fast.c' || echo '$(srcdir)/'`check/crc64_fast.c
+
+liblzma_la-sha256.lo: check/sha256.c
+@am__fastdepCC_TRUE@ $(LIBTOOL) --tag=CC $(AM_LIBTOOLFLAGS) $(LIBTOOLFLAGS) --mode=compile $(CC) $(DEFS) $(DEFAULT_INCLUDES) $(INCLUDES) $(liblzma_la_CPPFLAGS) $(CPPFLAGS) $(AM_CFLAGS) $(CFLAGS) -MT liblzma_la-sha256.lo -MD -MP -MF $(DEPDIR)/liblzma_la-sha256.Tpo -c -o liblzma_la-sha256.lo `test -f 'check/sha256.c' || echo '$(srcdir)/'`check/sha256.c
+@am__fastdepCC_TRUE@ $(am__mv) $(DEPDIR)/liblzma_la-sha256.Tpo $(DEPDIR)/liblzma_la-sha256.Plo
+@AMDEP_TRUE@@am__fastdepCC_FALSE@ source='check/sha256.c' object='liblzma_la-sha256.lo' libtool=yes @AMDEPBACKSLASH@
+@AMDEP_TRUE@@am__fastdepCC_FALSE@ DEPDIR=$(DEPDIR) $(CCDEPMODE) $(depcomp) @AMDEPBACKSLASH@
+@am__fastdepCC_FALSE@ $(LIBTOOL) --tag=CC $(AM_LIBTOOLFLAGS) $(LIBTOOLFLAGS) --mode=compile $(CC) $(DEFS) $(DEFAULT_INCLUDES) $(INCLUDES) $(liblzma_la_CPPFLAGS) $(CPPFLAGS) $(AM_CFLAGS) $(CFLAGS) -c -o liblzma_la-sha256.lo `test -f 'check/sha256.c' || echo '$(srcdir)/'`check/sha256.c
+
+liblzma_la-lz_encoder.lo: lz/lz_encoder.c
+@am__fastdepCC_TRUE@ $(LIBTOOL) --tag=CC $(AM_LIBTOOLFLAGS) $(LIBTOOLFLAGS) --mode=compile $(CC) $(DEFS) $(DEFAULT_INCLUDES) $(INCLUDES) $(liblzma_la_CPPFLAGS) $(CPPFLAGS) $(AM_CFLAGS) $(CFLAGS) -MT liblzma_la-lz_encoder.lo -MD -MP -MF $(DEPDIR)/liblzma_la-lz_encoder.Tpo -c -o liblzma_la-lz_encoder.lo `test -f 'lz/lz_encoder.c' || echo '$(srcdir)/'`lz/lz_encoder.c
+@am__fastdepCC_TRUE@ $(am__mv) $(DEPDIR)/liblzma_la-lz_encoder.Tpo $(DEPDIR)/liblzma_la-lz_encoder.Plo
+@AMDEP_TRUE@@am__fastdepCC_FALSE@ source='lz/lz_encoder.c' object='liblzma_la-lz_encoder.lo' libtool=yes @AMDEPBACKSLASH@
+@AMDEP_TRUE@@am__fastdepCC_FALSE@ DEPDIR=$(DEPDIR) $(CCDEPMODE) $(depcomp) @AMDEPBACKSLASH@
+@am__fastdepCC_FALSE@ $(LIBTOOL) --tag=CC $(AM_LIBTOOLFLAGS) $(LIBTOOLFLAGS) --mode=compile $(CC) $(DEFS) $(DEFAULT_INCLUDES) $(INCLUDES) $(liblzma_la_CPPFLAGS) $(CPPFLAGS) $(AM_CFLAGS) $(CFLAGS) -c -o liblzma_la-lz_encoder.lo `test -f 'lz/lz_encoder.c' || echo '$(srcdir)/'`lz/lz_encoder.c
+
+liblzma_la-lz_encoder_mf.lo: lz/lz_encoder_mf.c
+@am__fastdepCC_TRUE@ $(LIBTOOL) --tag=CC $(AM_LIBTOOLFLAGS) $(LIBTOOLFLAGS) --mode=compile $(CC) $(DEFS) $(DEFAULT_INCLUDES) $(INCLUDES) $(liblzma_la_CPPFLAGS) $(CPPFLAGS) $(AM_CFLAGS) $(CFLAGS) -MT liblzma_la-lz_encoder_mf.lo -MD -MP -MF $(DEPDIR)/liblzma_la-lz_encoder_mf.Tpo -c -o liblzma_la-lz_encoder_mf.lo `test -f 'lz/lz_encoder_mf.c' || echo '$(srcdir)/'`lz/lz_encoder_mf.c
+@am__fastdepCC_TRUE@ $(am__mv) $(DEPDIR)/liblzma_la-lz_encoder_mf.Tpo $(DEPDIR)/liblzma_la-lz_encoder_mf.Plo
+@AMDEP_TRUE@@am__fastdepCC_FALSE@ source='lz/lz_encoder_mf.c' object='liblzma_la-lz_encoder_mf.lo' libtool=yes @AMDEPBACKSLASH@
+@AMDEP_TRUE@@am__fastdepCC_FALSE@ DEPDIR=$(DEPDIR) $(CCDEPMODE) $(depcomp) @AMDEPBACKSLASH@
+@am__fastdepCC_FALSE@ $(LIBTOOL) --tag=CC $(AM_LIBTOOLFLAGS) $(LIBTOOLFLAGS) --mode=compile $(CC) $(DEFS) $(DEFAULT_INCLUDES) $(INCLUDES) $(liblzma_la_CPPFLAGS) $(CPPFLAGS) $(AM_CFLAGS) $(CFLAGS) -c -o liblzma_la-lz_encoder_mf.lo `test -f 'lz/lz_encoder_mf.c' || echo '$(srcdir)/'`lz/lz_encoder_mf.c
+
+liblzma_la-lz_decoder.lo: lz/lz_decoder.c
+@am__fastdepCC_TRUE@ $(LIBTOOL) --tag=CC $(AM_LIBTOOLFLAGS) $(LIBTOOLFLAGS) --mode=compile $(CC) $(DEFS) $(DEFAULT_INCLUDES) $(INCLUDES) $(liblzma_la_CPPFLAGS) $(CPPFLAGS) $(AM_CFLAGS) $(CFLAGS) -MT liblzma_la-lz_decoder.lo -MD -MP -MF $(DEPDIR)/liblzma_la-lz_decoder.Tpo -c -o liblzma_la-lz_decoder.lo `test -f 'lz/lz_decoder.c' || echo '$(srcdir)/'`lz/lz_decoder.c
+@am__fastdepCC_TRUE@ $(am__mv) $(DEPDIR)/liblzma_la-lz_decoder.Tpo $(DEPDIR)/liblzma_la-lz_decoder.Plo
+@AMDEP_TRUE@@am__fastdepCC_FALSE@ source='lz/lz_decoder.c' object='liblzma_la-lz_decoder.lo' libtool=yes @AMDEPBACKSLASH@
+@AMDEP_TRUE@@am__fastdepCC_FALSE@ DEPDIR=$(DEPDIR) $(CCDEPMODE) $(depcomp) @AMDEPBACKSLASH@
+@am__fastdepCC_FALSE@ $(LIBTOOL) --tag=CC $(AM_LIBTOOLFLAGS) $(LIBTOOLFLAGS) --mode=compile $(CC) $(DEFS) $(DEFAULT_INCLUDES) $(INCLUDES) $(liblzma_la_CPPFLAGS) $(CPPFLAGS) $(AM_CFLAGS) $(CFLAGS) -c -o liblzma_la-lz_decoder.lo `test -f 'lz/lz_decoder.c' || echo '$(srcdir)/'`lz/lz_decoder.c
+
+liblzma_la-lzma_encoder.lo: lzma/lzma_encoder.c
+@am__fastdepCC_TRUE@ $(LIBTOOL) --tag=CC $(AM_LIBTOOLFLAGS) $(LIBTOOLFLAGS) --mode=compile $(CC) $(DEFS) $(DEFAULT_INCLUDES) $(INCLUDES) $(liblzma_la_CPPFLAGS) $(CPPFLAGS) $(AM_CFLAGS) $(CFLAGS) -MT liblzma_la-lzma_encoder.lo -MD -MP -MF $(DEPDIR)/liblzma_la-lzma_encoder.Tpo -c -o liblzma_la-lzma_encoder.lo `test -f 'lzma/lzma_encoder.c' || echo '$(srcdir)/'`lzma/lzma_encoder.c
+@am__fastdepCC_TRUE@ $(am__mv) $(DEPDIR)/liblzma_la-lzma_encoder.Tpo $(DEPDIR)/liblzma_la-lzma_encoder.Plo
+@AMDEP_TRUE@@am__fastdepCC_FALSE@ source='lzma/lzma_encoder.c' object='liblzma_la-lzma_encoder.lo' libtool=yes @AMDEPBACKSLASH@
+@AMDEP_TRUE@@am__fastdepCC_FALSE@ DEPDIR=$(DEPDIR) $(CCDEPMODE) $(depcomp) @AMDEPBACKSLASH@
+@am__fastdepCC_FALSE@ $(LIBTOOL) --tag=CC $(AM_LIBTOOLFLAGS) $(LIBTOOLFLAGS) --mode=compile $(CC) $(DEFS) $(DEFAULT_INCLUDES) $(INCLUDES) $(liblzma_la_CPPFLAGS) $(CPPFLAGS) $(AM_CFLAGS) $(CFLAGS) -c -o liblzma_la-lzma_encoder.lo `test -f 'lzma/lzma_encoder.c' || echo '$(srcdir)/'`lzma/lzma_encoder.c
+
+liblzma_la-lzma_encoder_presets.lo: lzma/lzma_encoder_presets.c
+@am__fastdepCC_TRUE@ $(LIBTOOL) --tag=CC $(AM_LIBTOOLFLAGS) $(LIBTOOLFLAGS) --mode=compile $(CC) $(DEFS) $(DEFAULT_INCLUDES) $(INCLUDES) $(liblzma_la_CPPFLAGS) $(CPPFLAGS) $(AM_CFLAGS) $(CFLAGS) -MT liblzma_la-lzma_encoder_presets.lo -MD -MP -MF $(DEPDIR)/liblzma_la-lzma_encoder_presets.Tpo -c -o liblzma_la-lzma_encoder_presets.lo `test -f 'lzma/lzma_encoder_presets.c' || echo '$(srcdir)/'`lzma/lzma_encoder_presets.c
+@am__fastdepCC_TRUE@ $(am__mv) $(DEPDIR)/liblzma_la-lzma_encoder_presets.Tpo $(DEPDIR)/liblzma_la-lzma_encoder_presets.Plo
+@AMDEP_TRUE@@am__fastdepCC_FALSE@ source='lzma/lzma_encoder_presets.c' object='liblzma_la-lzma_encoder_presets.lo' libtool=yes @AMDEPBACKSLASH@
+@AMDEP_TRUE@@am__fastdepCC_FALSE@ DEPDIR=$(DEPDIR) $(CCDEPMODE) $(depcomp) @AMDEPBACKSLASH@
+@am__fastdepCC_FALSE@ $(LIBTOOL) --tag=CC $(AM_LIBTOOLFLAGS) $(LIBTOOLFLAGS) --mode=compile $(CC) $(DEFS) $(DEFAULT_INCLUDES) $(INCLUDES) $(liblzma_la_CPPFLAGS) $(CPPFLAGS) $(AM_CFLAGS) $(CFLAGS) -c -o liblzma_la-lzma_encoder_presets.lo `test -f 'lzma/lzma_encoder_presets.c' || echo '$(srcdir)/'`lzma/lzma_encoder_presets.c
+
+liblzma_la-lzma_encoder_optimum_fast.lo: lzma/lzma_encoder_optimum_fast.c
+@am__fastdepCC_TRUE@ $(LIBTOOL) --tag=CC $(AM_LIBTOOLFLAGS) $(LIBTOOLFLAGS) --mode=compile $(CC) $(DEFS) $(DEFAULT_INCLUDES) $(INCLUDES) $(liblzma_la_CPPFLAGS) $(CPPFLAGS) $(AM_CFLAGS) $(CFLAGS) -MT liblzma_la-lzma_encoder_optimum_fast.lo -MD -MP -MF $(DEPDIR)/liblzma_la-lzma_encoder_optimum_fast.Tpo -c -o liblzma_la-lzma_encoder_optimum_fast.lo `test -f 'lzma/lzma_encoder_optimum_fast.c' || echo '$(srcdir)/'`lzma/lzma_encoder_optimum_fast.c
+@am__fastdepCC_TRUE@ $(am__mv) $(DEPDIR)/liblzma_la-lzma_encoder_optimum_fast.Tpo $(DEPDIR)/liblzma_la-lzma_encoder_optimum_fast.Plo
+@AMDEP_TRUE@@am__fastdepCC_FALSE@ source='lzma/lzma_encoder_optimum_fast.c' object='liblzma_la-lzma_encoder_optimum_fast.lo' libtool=yes @AMDEPBACKSLASH@
+@AMDEP_TRUE@@am__fastdepCC_FALSE@ DEPDIR=$(DEPDIR) $(CCDEPMODE) $(depcomp) @AMDEPBACKSLASH@
+@am__fastdepCC_FALSE@ $(LIBTOOL) --tag=CC $(AM_LIBTOOLFLAGS) $(LIBTOOLFLAGS) --mode=compile $(CC) $(DEFS) $(DEFAULT_INCLUDES) $(INCLUDES) $(liblzma_la_CPPFLAGS) $(CPPFLAGS) $(AM_CFLAGS) $(CFLAGS) -c -o liblzma_la-lzma_encoder_optimum_fast.lo `test -f 'lzma/lzma_encoder_optimum_fast.c' || echo '$(srcdir)/'`lzma/lzma_encoder_optimum_fast.c
+
+liblzma_la-lzma_encoder_optimum_normal.lo: lzma/lzma_encoder_optimum_normal.c
+@am__fastdepCC_TRUE@ $(LIBTOOL) --tag=CC $(AM_LIBTOOLFLAGS) $(LIBTOOLFLAGS) --mode=compile $(CC) $(DEFS) $(DEFAULT_INCLUDES) $(INCLUDES) $(liblzma_la_CPPFLAGS) $(CPPFLAGS) $(AM_CFLAGS) $(CFLAGS) -MT liblzma_la-lzma_encoder_optimum_normal.lo -MD -MP -MF $(DEPDIR)/liblzma_la-lzma_encoder_optimum_normal.Tpo -c -o liblzma_la-lzma_encoder_optimum_normal.lo `test -f 'lzma/lzma_encoder_optimum_normal.c' || echo '$(srcdir)/'`lzma/lzma_encoder_optimum_normal.c
+@am__fastdepCC_TRUE@ $(am__mv) $(DEPDIR)/liblzma_la-lzma_encoder_optimum_normal.Tpo $(DEPDIR)/liblzma_la-lzma_encoder_optimum_normal.Plo
+@AMDEP_TRUE@@am__fastdepCC_FALSE@ source='lzma/lzma_encoder_optimum_normal.c' object='liblzma_la-lzma_encoder_optimum_normal.lo' libtool=yes @AMDEPBACKSLASH@
+@AMDEP_TRUE@@am__fastdepCC_FALSE@ DEPDIR=$(DEPDIR) $(CCDEPMODE) $(depcomp) @AMDEPBACKSLASH@
+@am__fastdepCC_FALSE@ $(LIBTOOL) --tag=CC $(AM_LIBTOOLFLAGS) $(LIBTOOLFLAGS) --mode=compile $(CC) $(DEFS) $(DEFAULT_INCLUDES) $(INCLUDES) $(liblzma_la_CPPFLAGS) $(CPPFLAGS) $(AM_CFLAGS) $(CFLAGS) -c -o liblzma_la-lzma_encoder_optimum_normal.lo `test -f 'lzma/lzma_encoder_optimum_normal.c' || echo '$(srcdir)/'`lzma/lzma_encoder_optimum_normal.c
+
+liblzma_la-fastpos_table.lo: lzma/fastpos_table.c
+@am__fastdepCC_TRUE@ $(LIBTOOL) --tag=CC $(AM_LIBTOOLFLAGS) $(LIBTOOLFLAGS) --mode=compile $(CC) $(DEFS) $(DEFAULT_INCLUDES) $(INCLUDES) $(liblzma_la_CPPFLAGS) $(CPPFLAGS) $(AM_CFLAGS) $(CFLAGS) -MT liblzma_la-fastpos_table.lo -MD -MP -MF $(DEPDIR)/liblzma_la-fastpos_table.Tpo -c -o liblzma_la-fastpos_table.lo `test -f 'lzma/fastpos_table.c' || echo '$(srcdir)/'`lzma/fastpos_table.c
+@am__fastdepCC_TRUE@ $(am__mv) $(DEPDIR)/liblzma_la-fastpos_table.Tpo $(DEPDIR)/liblzma_la-fastpos_table.Plo
+@AMDEP_TRUE@@am__fastdepCC_FALSE@ source='lzma/fastpos_table.c' object='liblzma_la-fastpos_table.lo' libtool=yes @AMDEPBACKSLASH@
+@AMDEP_TRUE@@am__fastdepCC_FALSE@ DEPDIR=$(DEPDIR) $(CCDEPMODE) $(depcomp) @AMDEPBACKSLASH@
+@am__fastdepCC_FALSE@ $(LIBTOOL) --tag=CC $(AM_LIBTOOLFLAGS) $(LIBTOOLFLAGS) --mode=compile $(CC) $(DEFS) $(DEFAULT_INCLUDES) $(INCLUDES) $(liblzma_la_CPPFLAGS) $(CPPFLAGS) $(AM_CFLAGS) $(CFLAGS) -c -o liblzma_la-fastpos_table.lo `test -f 'lzma/fastpos_table.c' || echo '$(srcdir)/'`lzma/fastpos_table.c
+
+liblzma_la-lzma_decoder.lo: lzma/lzma_decoder.c
+@am__fastdepCC_TRUE@ $(LIBTOOL) --tag=CC $(AM_LIBTOOLFLAGS) $(LIBTOOLFLAGS) --mode=compile $(CC) $(DEFS) $(DEFAULT_INCLUDES) $(INCLUDES) $(liblzma_la_CPPFLAGS) $(CPPFLAGS) $(AM_CFLAGS) $(CFLAGS) -MT liblzma_la-lzma_decoder.lo -MD -MP -MF $(DEPDIR)/liblzma_la-lzma_decoder.Tpo -c -o liblzma_la-lzma_decoder.lo `test -f 'lzma/lzma_decoder.c' || echo '$(srcdir)/'`lzma/lzma_decoder.c
+@am__fastdepCC_TRUE@ $(am__mv) $(DEPDIR)/liblzma_la-lzma_decoder.Tpo $(DEPDIR)/liblzma_la-lzma_decoder.Plo
+@AMDEP_TRUE@@am__fastdepCC_FALSE@ source='lzma/lzma_decoder.c' object='liblzma_la-lzma_decoder.lo' libtool=yes @AMDEPBACKSLASH@
+@AMDEP_TRUE@@am__fastdepCC_FALSE@ DEPDIR=$(DEPDIR) $(CCDEPMODE) $(depcomp) @AMDEPBACKSLASH@
+@am__fastdepCC_FALSE@ $(LIBTOOL) --tag=CC $(AM_LIBTOOLFLAGS) $(LIBTOOLFLAGS) --mode=compile $(CC) $(DEFS) $(DEFAULT_INCLUDES) $(INCLUDES) $(liblzma_la_CPPFLAGS) $(CPPFLAGS) $(AM_CFLAGS) $(CFLAGS) -c -o liblzma_la-lzma_decoder.lo `test -f 'lzma/lzma_decoder.c' || echo '$(srcdir)/'`lzma/lzma_decoder.c
+
+liblzma_la-lzma2_encoder.lo: lzma/lzma2_encoder.c
+@am__fastdepCC_TRUE@ $(LIBTOOL) --tag=CC $(AM_LIBTOOLFLAGS) $(LIBTOOLFLAGS) --mode=compile $(CC) $(DEFS) $(DEFAULT_INCLUDES) $(INCLUDES) $(liblzma_la_CPPFLAGS) $(CPPFLAGS) $(AM_CFLAGS) $(CFLAGS) -MT liblzma_la-lzma2_encoder.lo -MD -MP -MF $(DEPDIR)/liblzma_la-lzma2_encoder.Tpo -c -o liblzma_la-lzma2_encoder.lo `test -f 'lzma/lzma2_encoder.c' || echo '$(srcdir)/'`lzma/lzma2_encoder.c
+@am__fastdepCC_TRUE@ $(am__mv) $(DEPDIR)/liblzma_la-lzma2_encoder.Tpo $(DEPDIR)/liblzma_la-lzma2_encoder.Plo
+@AMDEP_TRUE@@am__fastdepCC_FALSE@ source='lzma/lzma2_encoder.c' object='liblzma_la-lzma2_encoder.lo' libtool=yes @AMDEPBACKSLASH@
+@AMDEP_TRUE@@am__fastdepCC_FALSE@ DEPDIR=$(DEPDIR) $(CCDEPMODE) $(depcomp) @AMDEPBACKSLASH@
+@am__fastdepCC_FALSE@ $(LIBTOOL) --tag=CC $(AM_LIBTOOLFLAGS) $(LIBTOOLFLAGS) --mode=compile $(CC) $(DEFS) $(DEFAULT_INCLUDES) $(INCLUDES) $(liblzma_la_CPPFLAGS) $(CPPFLAGS) $(AM_CFLAGS) $(CFLAGS) -c -o liblzma_la-lzma2_encoder.lo `test -f 'lzma/lzma2_encoder.c' || echo '$(srcdir)/'`lzma/lzma2_encoder.c
+
+liblzma_la-lzma2_decoder.lo: lzma/lzma2_decoder.c
+@am__fastdepCC_TRUE@ $(LIBTOOL) --tag=CC $(AM_LIBTOOLFLAGS) $(LIBTOOLFLAGS) --mode=compile $(CC) $(DEFS) $(DEFAULT_INCLUDES) $(INCLUDES) $(liblzma_la_CPPFLAGS) $(CPPFLAGS) $(AM_CFLAGS) $(CFLAGS) -MT liblzma_la-lzma2_decoder.lo -MD -MP -MF $(DEPDIR)/liblzma_la-lzma2_decoder.Tpo -c -o liblzma_la-lzma2_decoder.lo `test -f 'lzma/lzma2_decoder.c' || echo '$(srcdir)/'`lzma/lzma2_decoder.c
+@am__fastdepCC_TRUE@ $(am__mv) $(DEPDIR)/liblzma_la-lzma2_decoder.Tpo $(DEPDIR)/liblzma_la-lzma2_decoder.Plo
+@AMDEP_TRUE@@am__fastdepCC_FALSE@ source='lzma/lzma2_decoder.c' object='liblzma_la-lzma2_decoder.lo' libtool=yes @AMDEPBACKSLASH@
+@AMDEP_TRUE@@am__fastdepCC_FALSE@ DEPDIR=$(DEPDIR) $(CCDEPMODE) $(depcomp) @AMDEPBACKSLASH@
+@am__fastdepCC_FALSE@ $(LIBTOOL) --tag=CC $(AM_LIBTOOLFLAGS) $(LIBTOOLFLAGS) --mode=compile $(CC) $(DEFS) $(DEFAULT_INCLUDES) $(INCLUDES) $(liblzma_la_CPPFLAGS) $(CPPFLAGS) $(AM_CFLAGS) $(CFLAGS) -c -o liblzma_la-lzma2_decoder.lo `test -f 'lzma/lzma2_decoder.c' || echo '$(srcdir)/'`lzma/lzma2_decoder.c
+
+liblzma_la-price_table.lo: rangecoder/price_table.c
+@am__fastdepCC_TRUE@ $(LIBTOOL) --tag=CC $(AM_LIBTOOLFLAGS) $(LIBTOOLFLAGS) --mode=compile $(CC) $(DEFS) $(DEFAULT_INCLUDES) $(INCLUDES) $(liblzma_la_CPPFLAGS) $(CPPFLAGS) $(AM_CFLAGS) $(CFLAGS) -MT liblzma_la-price_table.lo -MD -MP -MF $(DEPDIR)/liblzma_la-price_table.Tpo -c -o liblzma_la-price_table.lo `test -f 'rangecoder/price_table.c' || echo '$(srcdir)/'`rangecoder/price_table.c
+@am__fastdepCC_TRUE@ $(am__mv) $(DEPDIR)/liblzma_la-price_table.Tpo $(DEPDIR)/liblzma_la-price_table.Plo
+@AMDEP_TRUE@@am__fastdepCC_FALSE@ source='rangecoder/price_table.c' object='liblzma_la-price_table.lo' libtool=yes @AMDEPBACKSLASH@
+@AMDEP_TRUE@@am__fastdepCC_FALSE@ DEPDIR=$(DEPDIR) $(CCDEPMODE) $(depcomp) @AMDEPBACKSLASH@
+@am__fastdepCC_FALSE@ $(LIBTOOL) --tag=CC $(AM_LIBTOOLFLAGS) $(LIBTOOLFLAGS) --mode=compile $(CC) $(DEFS) $(DEFAULT_INCLUDES) $(INCLUDES) $(liblzma_la_CPPFLAGS) $(CPPFLAGS) $(AM_CFLAGS) $(CFLAGS) -c -o liblzma_la-price_table.lo `test -f 'rangecoder/price_table.c' || echo '$(srcdir)/'`rangecoder/price_table.c
+
+liblzma_la-subblock_encoder.lo: subblock/subblock_encoder.c
+@am__fastdepCC_TRUE@ $(LIBTOOL) --tag=CC $(AM_LIBTOOLFLAGS) $(LIBTOOLFLAGS) --mode=compile $(CC) $(DEFS) $(DEFAULT_INCLUDES) $(INCLUDES) $(liblzma_la_CPPFLAGS) $(CPPFLAGS) $(AM_CFLAGS) $(CFLAGS) -MT liblzma_la-subblock_encoder.lo -MD -MP -MF $(DEPDIR)/liblzma_la-subblock_encoder.Tpo -c -o liblzma_la-subblock_encoder.lo `test -f 'subblock/subblock_encoder.c' || echo '$(srcdir)/'`subblock/subblock_encoder.c
+@am__fastdepCC_TRUE@ $(am__mv) $(DEPDIR)/liblzma_la-subblock_encoder.Tpo $(DEPDIR)/liblzma_la-subblock_encoder.Plo
+@AMDEP_TRUE@@am__fastdepCC_FALSE@ source='subblock/subblock_encoder.c' object='liblzma_la-subblock_encoder.lo' libtool=yes @AMDEPBACKSLASH@
+@AMDEP_TRUE@@am__fastdepCC_FALSE@ DEPDIR=$(DEPDIR) $(CCDEPMODE) $(depcomp) @AMDEPBACKSLASH@
+@am__fastdepCC_FALSE@ $(LIBTOOL) --tag=CC $(AM_LIBTOOLFLAGS) $(LIBTOOLFLAGS) --mode=compile $(CC) $(DEFS) $(DEFAULT_INCLUDES) $(INCLUDES) $(liblzma_la_CPPFLAGS) $(CPPFLAGS) $(AM_CFLAGS) $(CFLAGS) -c -o liblzma_la-subblock_encoder.lo `test -f 'subblock/subblock_encoder.c' || echo '$(srcdir)/'`subblock/subblock_encoder.c
+
+liblzma_la-subblock_decoder.lo: subblock/subblock_decoder.c
+@am__fastdepCC_TRUE@ $(LIBTOOL) --tag=CC $(AM_LIBTOOLFLAGS) $(LIBTOOLFLAGS) --mode=compile $(CC) $(DEFS) $(DEFAULT_INCLUDES) $(INCLUDES) $(liblzma_la_CPPFLAGS) $(CPPFLAGS) $(AM_CFLAGS) $(CFLAGS) -MT liblzma_la-subblock_decoder.lo -MD -MP -MF $(DEPDIR)/liblzma_la-subblock_decoder.Tpo -c -o liblzma_la-subblock_decoder.lo `test -f 'subblock/subblock_decoder.c' || echo '$(srcdir)/'`subblock/subblock_decoder.c
+@am__fastdepCC_TRUE@ $(am__mv) $(DEPDIR)/liblzma_la-subblock_decoder.Tpo $(DEPDIR)/liblzma_la-subblock_decoder.Plo
+@AMDEP_TRUE@@am__fastdepCC_FALSE@ source='subblock/subblock_decoder.c' object='liblzma_la-subblock_decoder.lo' libtool=yes @AMDEPBACKSLASH@
+@AMDEP_TRUE@@am__fastdepCC_FALSE@ DEPDIR=$(DEPDIR) $(CCDEPMODE) $(depcomp) @AMDEPBACKSLASH@
+@am__fastdepCC_FALSE@ $(LIBTOOL) --tag=CC $(AM_LIBTOOLFLAGS) $(LIBTOOLFLAGS) --mode=compile $(CC) $(DEFS) $(DEFAULT_INCLUDES) $(INCLUDES) $(liblzma_la_CPPFLAGS) $(CPPFLAGS) $(AM_CFLAGS) $(CFLAGS) -c -o liblzma_la-subblock_decoder.lo `test -f 'subblock/subblock_decoder.c' || echo '$(srcdir)/'`subblock/subblock_decoder.c
+
+liblzma_la-subblock_decoder_helper.lo: subblock/subblock_decoder_helper.c
+@am__fastdepCC_TRUE@ $(LIBTOOL) --tag=CC $(AM_LIBTOOLFLAGS) $(LIBTOOLFLAGS) --mode=compile $(CC) $(DEFS) $(DEFAULT_INCLUDES) $(INCLUDES) $(liblzma_la_CPPFLAGS) $(CPPFLAGS) $(AM_CFLAGS) $(CFLAGS) -MT liblzma_la-subblock_decoder_helper.lo -MD -MP -MF $(DEPDIR)/liblzma_la-subblock_decoder_helper.Tpo -c -o liblzma_la-subblock_decoder_helper.lo `test -f 'subblock/subblock_decoder_helper.c' || echo '$(srcdir)/'`subblock/subblock_decoder_helper.c
+@am__fastdepCC_TRUE@ $(am__mv) $(DEPDIR)/liblzma_la-subblock_decoder_helper.Tpo $(DEPDIR)/liblzma_la-subblock_decoder_helper.Plo
+@AMDEP_TRUE@@am__fastdepCC_FALSE@ source='subblock/subblock_decoder_helper.c' object='liblzma_la-subblock_decoder_helper.lo' libtool=yes @AMDEPBACKSLASH@
+@AMDEP_TRUE@@am__fastdepCC_FALSE@ DEPDIR=$(DEPDIR) $(CCDEPMODE) $(depcomp) @AMDEPBACKSLASH@
+@am__fastdepCC_FALSE@ $(LIBTOOL) --tag=CC $(AM_LIBTOOLFLAGS) $(LIBTOOLFLAGS) --mode=compile $(CC) $(DEFS) $(DEFAULT_INCLUDES) $(INCLUDES) $(liblzma_la_CPPFLAGS) $(CPPFLAGS) $(AM_CFLAGS) $(CFLAGS) -c -o liblzma_la-subblock_decoder_helper.lo `test -f 'subblock/subblock_decoder_helper.c' || echo '$(srcdir)/'`subblock/subblock_decoder_helper.c
+
+liblzma_la-delta_common.lo: delta/delta_common.c
+@am__fastdepCC_TRUE@ $(LIBTOOL) --tag=CC $(AM_LIBTOOLFLAGS) $(LIBTOOLFLAGS) --mode=compile $(CC) $(DEFS) $(DEFAULT_INCLUDES) $(INCLUDES) $(liblzma_la_CPPFLAGS) $(CPPFLAGS) $(AM_CFLAGS) $(CFLAGS) -MT liblzma_la-delta_common.lo -MD -MP -MF $(DEPDIR)/liblzma_la-delta_common.Tpo -c -o liblzma_la-delta_common.lo `test -f 'delta/delta_common.c' || echo '$(srcdir)/'`delta/delta_common.c
+@am__fastdepCC_TRUE@ $(am__mv) $(DEPDIR)/liblzma_la-delta_common.Tpo $(DEPDIR)/liblzma_la-delta_common.Plo
+@AMDEP_TRUE@@am__fastdepCC_FALSE@ source='delta/delta_common.c' object='liblzma_la-delta_common.lo' libtool=yes @AMDEPBACKSLASH@
+@AMDEP_TRUE@@am__fastdepCC_FALSE@ DEPDIR=$(DEPDIR) $(CCDEPMODE) $(depcomp) @AMDEPBACKSLASH@
+@am__fastdepCC_FALSE@ $(LIBTOOL) --tag=CC $(AM_LIBTOOLFLAGS) $(LIBTOOLFLAGS) --mode=compile $(CC) $(DEFS) $(DEFAULT_INCLUDES) $(INCLUDES) $(liblzma_la_CPPFLAGS) $(CPPFLAGS) $(AM_CFLAGS) $(CFLAGS) -c -o liblzma_la-delta_common.lo `test -f 'delta/delta_common.c' || echo '$(srcdir)/'`delta/delta_common.c
+
+liblzma_la-delta_encoder.lo: delta/delta_encoder.c
+@am__fastdepCC_TRUE@ $(LIBTOOL) --tag=CC $(AM_LIBTOOLFLAGS) $(LIBTOOLFLAGS) --mode=compile $(CC) $(DEFS) $(DEFAULT_INCLUDES) $(INCLUDES) $(liblzma_la_CPPFLAGS) $(CPPFLAGS) $(AM_CFLAGS) $(CFLAGS) -MT liblzma_la-delta_encoder.lo -MD -MP -MF $(DEPDIR)/liblzma_la-delta_encoder.Tpo -c -o liblzma_la-delta_encoder.lo `test -f 'delta/delta_encoder.c' || echo '$(srcdir)/'`delta/delta_encoder.c
+@am__fastdepCC_TRUE@ $(am__mv) $(DEPDIR)/liblzma_la-delta_encoder.Tpo $(DEPDIR)/liblzma_la-delta_encoder.Plo
+@AMDEP_TRUE@@am__fastdepCC_FALSE@ source='delta/delta_encoder.c' object='liblzma_la-delta_encoder.lo' libtool=yes @AMDEPBACKSLASH@
+@AMDEP_TRUE@@am__fastdepCC_FALSE@ DEPDIR=$(DEPDIR) $(CCDEPMODE) $(depcomp) @AMDEPBACKSLASH@
+@am__fastdepCC_FALSE@ $(LIBTOOL) --tag=CC $(AM_LIBTOOLFLAGS) $(LIBTOOLFLAGS) --mode=compile $(CC) $(DEFS) $(DEFAULT_INCLUDES) $(INCLUDES) $(liblzma_la_CPPFLAGS) $(CPPFLAGS) $(AM_CFLAGS) $(CFLAGS) -c -o liblzma_la-delta_encoder.lo `test -f 'delta/delta_encoder.c' || echo '$(srcdir)/'`delta/delta_encoder.c
+
+liblzma_la-delta_decoder.lo: delta/delta_decoder.c
+@am__fastdepCC_TRUE@ $(LIBTOOL) --tag=CC $(AM_LIBTOOLFLAGS) $(LIBTOOLFLAGS) --mode=compile $(CC) $(DEFS) $(DEFAULT_INCLUDES) $(INCLUDES) $(liblzma_la_CPPFLAGS) $(CPPFLAGS) $(AM_CFLAGS) $(CFLAGS) -MT liblzma_la-delta_decoder.lo -MD -MP -MF $(DEPDIR)/liblzma_la-delta_decoder.Tpo -c -o liblzma_la-delta_decoder.lo `test -f 'delta/delta_decoder.c' || echo '$(srcdir)/'`delta/delta_decoder.c
+@am__fastdepCC_TRUE@ $(am__mv) $(DEPDIR)/liblzma_la-delta_decoder.Tpo $(DEPDIR)/liblzma_la-delta_decoder.Plo
+@AMDEP_TRUE@@am__fastdepCC_FALSE@ source='delta/delta_decoder.c' object='liblzma_la-delta_decoder.lo' libtool=yes @AMDEPBACKSLASH@
+@AMDEP_TRUE@@am__fastdepCC_FALSE@ DEPDIR=$(DEPDIR) $(CCDEPMODE) $(depcomp) @AMDEPBACKSLASH@
+@am__fastdepCC_FALSE@ $(LIBTOOL) --tag=CC $(AM_LIBTOOLFLAGS) $(LIBTOOLFLAGS) --mode=compile $(CC) $(DEFS) $(DEFAULT_INCLUDES) $(INCLUDES) $(liblzma_la_CPPFLAGS) $(CPPFLAGS) $(AM_CFLAGS) $(CFLAGS) -c -o liblzma_la-delta_decoder.lo `test -f 'delta/delta_decoder.c' || echo '$(srcdir)/'`delta/delta_decoder.c
+
+liblzma_la-simple_coder.lo: simple/simple_coder.c
+@am__fastdepCC_TRUE@ $(LIBTOOL) --tag=CC $(AM_LIBTOOLFLAGS) $(LIBTOOLFLAGS) --mode=compile $(CC) $(DEFS) $(DEFAULT_INCLUDES) $(INCLUDES) $(liblzma_la_CPPFLAGS) $(CPPFLAGS) $(AM_CFLAGS) $(CFLAGS) -MT liblzma_la-simple_coder.lo -MD -MP -MF $(DEPDIR)/liblzma_la-simple_coder.Tpo -c -o liblzma_la-simple_coder.lo `test -f 'simple/simple_coder.c' || echo '$(srcdir)/'`simple/simple_coder.c
+@am__fastdepCC_TRUE@ $(am__mv) $(DEPDIR)/liblzma_la-simple_coder.Tpo $(DEPDIR)/liblzma_la-simple_coder.Plo
+@AMDEP_TRUE@@am__fastdepCC_FALSE@ source='simple/simple_coder.c' object='liblzma_la-simple_coder.lo' libtool=yes @AMDEPBACKSLASH@
+@AMDEP_TRUE@@am__fastdepCC_FALSE@ DEPDIR=$(DEPDIR) $(CCDEPMODE) $(depcomp) @AMDEPBACKSLASH@
+@am__fastdepCC_FALSE@ $(LIBTOOL) --tag=CC $(AM_LIBTOOLFLAGS) $(LIBTOOLFLAGS) --mode=compile $(CC) $(DEFS) $(DEFAULT_INCLUDES) $(INCLUDES) $(liblzma_la_CPPFLAGS) $(CPPFLAGS) $(AM_CFLAGS) $(CFLAGS) -c -o liblzma_la-simple_coder.lo `test -f 'simple/simple_coder.c' || echo '$(srcdir)/'`simple/simple_coder.c
+
+liblzma_la-simple_encoder.lo: simple/simple_encoder.c
+@am__fastdepCC_TRUE@ $(LIBTOOL) --tag=CC $(AM_LIBTOOLFLAGS) $(LIBTOOLFLAGS) --mode=compile $(CC) $(DEFS) $(DEFAULT_INCLUDES) $(INCLUDES) $(liblzma_la_CPPFLAGS) $(CPPFLAGS) $(AM_CFLAGS) $(CFLAGS) -MT liblzma_la-simple_encoder.lo -MD -MP -MF $(DEPDIR)/liblzma_la-simple_encoder.Tpo -c -o liblzma_la-simple_encoder.lo `test -f 'simple/simple_encoder.c' || echo '$(srcdir)/'`simple/simple_encoder.c
+@am__fastdepCC_TRUE@ $(am__mv) $(DEPDIR)/liblzma_la-simple_encoder.Tpo $(DEPDIR)/liblzma_la-simple_encoder.Plo
+@AMDEP_TRUE@@am__fastdepCC_FALSE@ source='simple/simple_encoder.c' object='liblzma_la-simple_encoder.lo' libtool=yes @AMDEPBACKSLASH@
+@AMDEP_TRUE@@am__fastdepCC_FALSE@ DEPDIR=$(DEPDIR) $(CCDEPMODE) $(depcomp) @AMDEPBACKSLASH@
+@am__fastdepCC_FALSE@ $(LIBTOOL) --tag=CC $(AM_LIBTOOLFLAGS) $(LIBTOOLFLAGS) --mode=compile $(CC) $(DEFS) $(DEFAULT_INCLUDES) $(INCLUDES) $(liblzma_la_CPPFLAGS) $(CPPFLAGS) $(AM_CFLAGS) $(CFLAGS) -c -o liblzma_la-simple_encoder.lo `test -f 'simple/simple_encoder.c' || echo '$(srcdir)/'`simple/simple_encoder.c
+
+liblzma_la-simple_decoder.lo: simple/simple_decoder.c
+@am__fastdepCC_TRUE@ $(LIBTOOL) --tag=CC $(AM_LIBTOOLFLAGS) $(LIBTOOLFLAGS) --mode=compile $(CC) $(DEFS) $(DEFAULT_INCLUDES) $(INCLUDES) $(liblzma_la_CPPFLAGS) $(CPPFLAGS) $(AM_CFLAGS) $(CFLAGS) -MT liblzma_la-simple_decoder.lo -MD -MP -MF $(DEPDIR)/liblzma_la-simple_decoder.Tpo -c -o liblzma_la-simple_decoder.lo `test -f 'simple/simple_decoder.c' || echo '$(srcdir)/'`simple/simple_decoder.c
+@am__fastdepCC_TRUE@ $(am__mv) $(DEPDIR)/liblzma_la-simple_decoder.Tpo $(DEPDIR)/liblzma_la-simple_decoder.Plo
+@AMDEP_TRUE@@am__fastdepCC_FALSE@ source='simple/simple_decoder.c' object='liblzma_la-simple_decoder.lo' libtool=yes @AMDEPBACKSLASH@
+@AMDEP_TRUE@@am__fastdepCC_FALSE@ DEPDIR=$(DEPDIR) $(CCDEPMODE) $(depcomp) @AMDEPBACKSLASH@
+@am__fastdepCC_FALSE@ $(LIBTOOL) --tag=CC $(AM_LIBTOOLFLAGS) $(LIBTOOLFLAGS) --mode=compile $(CC) $(DEFS) $(DEFAULT_INCLUDES) $(INCLUDES) $(liblzma_la_CPPFLAGS) $(CPPFLAGS) $(AM_CFLAGS) $(CFLAGS) -c -o liblzma_la-simple_decoder.lo `test -f 'simple/simple_decoder.c' || echo '$(srcdir)/'`simple/simple_decoder.c
+
+liblzma_la-x86.lo: simple/x86.c
+@am__fastdepCC_TRUE@ $(LIBTOOL) --tag=CC $(AM_LIBTOOLFLAGS) $(LIBTOOLFLAGS) --mode=compile $(CC) $(DEFS) $(DEFAULT_INCLUDES) $(INCLUDES) $(liblzma_la_CPPFLAGS) $(CPPFLAGS) $(AM_CFLAGS) $(CFLAGS) -MT liblzma_la-x86.lo -MD -MP -MF $(DEPDIR)/liblzma_la-x86.Tpo -c -o liblzma_la-x86.lo `test -f 'simple/x86.c' || echo '$(srcdir)/'`simple/x86.c
+@am__fastdepCC_TRUE@ $(am__mv) $(DEPDIR)/liblzma_la-x86.Tpo $(DEPDIR)/liblzma_la-x86.Plo
+@AMDEP_TRUE@@am__fastdepCC_FALSE@ source='simple/x86.c' object='liblzma_la-x86.lo' libtool=yes @AMDEPBACKSLASH@
+@AMDEP_TRUE@@am__fastdepCC_FALSE@ DEPDIR=$(DEPDIR) $(CCDEPMODE) $(depcomp) @AMDEPBACKSLASH@
+@am__fastdepCC_FALSE@ $(LIBTOOL) --tag=CC $(AM_LIBTOOLFLAGS) $(LIBTOOLFLAGS) --mode=compile $(CC) $(DEFS) $(DEFAULT_INCLUDES) $(INCLUDES) $(liblzma_la_CPPFLAGS) $(CPPFLAGS) $(AM_CFLAGS) $(CFLAGS) -c -o liblzma_la-x86.lo `test -f 'simple/x86.c' || echo '$(srcdir)/'`simple/x86.c
+
+liblzma_la-powerpc.lo: simple/powerpc.c
+@am__fastdepCC_TRUE@ $(LIBTOOL) --tag=CC $(AM_LIBTOOLFLAGS) $(LIBTOOLFLAGS) --mode=compile $(CC) $(DEFS) $(DEFAULT_INCLUDES) $(INCLUDES) $(liblzma_la_CPPFLAGS) $(CPPFLAGS) $(AM_CFLAGS) $(CFLAGS) -MT liblzma_la-powerpc.lo -MD -MP -MF $(DEPDIR)/liblzma_la-powerpc.Tpo -c -o liblzma_la-powerpc.lo `test -f 'simple/powerpc.c' || echo '$(srcdir)/'`simple/powerpc.c
+@am__fastdepCC_TRUE@ $(am__mv) $(DEPDIR)/liblzma_la-powerpc.Tpo $(DEPDIR)/liblzma_la-powerpc.Plo
+@AMDEP_TRUE@@am__fastdepCC_FALSE@ source='simple/powerpc.c' object='liblzma_la-powerpc.lo' libtool=yes @AMDEPBACKSLASH@
+@AMDEP_TRUE@@am__fastdepCC_FALSE@ DEPDIR=$(DEPDIR) $(CCDEPMODE) $(depcomp) @AMDEPBACKSLASH@
+@am__fastdepCC_FALSE@ $(LIBTOOL) --tag=CC $(AM_LIBTOOLFLAGS) $(LIBTOOLFLAGS) --mode=compile $(CC) $(DEFS) $(DEFAULT_INCLUDES) $(INCLUDES) $(liblzma_la_CPPFLAGS) $(CPPFLAGS) $(AM_CFLAGS) $(CFLAGS) -c -o liblzma_la-powerpc.lo `test -f 'simple/powerpc.c' || echo '$(srcdir)/'`simple/powerpc.c
+
+liblzma_la-ia64.lo: simple/ia64.c
+@am__fastdepCC_TRUE@ $(LIBTOOL) --tag=CC $(AM_LIBTOOLFLAGS) $(LIBTOOLFLAGS) --mode=compile $(CC) $(DEFS) $(DEFAULT_INCLUDES) $(INCLUDES) $(liblzma_la_CPPFLAGS) $(CPPFLAGS) $(AM_CFLAGS) $(CFLAGS) -MT liblzma_la-ia64.lo -MD -MP -MF $(DEPDIR)/liblzma_la-ia64.Tpo -c -o liblzma_la-ia64.lo `test -f 'simple/ia64.c' || echo '$(srcdir)/'`simple/ia64.c
+@am__fastdepCC_TRUE@ $(am__mv) $(DEPDIR)/liblzma_la-ia64.Tpo $(DEPDIR)/liblzma_la-ia64.Plo
+@AMDEP_TRUE@@am__fastdepCC_FALSE@ source='simple/ia64.c' object='liblzma_la-ia64.lo' libtool=yes @AMDEPBACKSLASH@
+@AMDEP_TRUE@@am__fastdepCC_FALSE@ DEPDIR=$(DEPDIR) $(CCDEPMODE) $(depcomp) @AMDEPBACKSLASH@
+@am__fastdepCC_FALSE@ $(LIBTOOL) --tag=CC $(AM_LIBTOOLFLAGS) $(LIBTOOLFLAGS) --mode=compile $(CC) $(DEFS) $(DEFAULT_INCLUDES) $(INCLUDES) $(liblzma_la_CPPFLAGS) $(CPPFLAGS) $(AM_CFLAGS) $(CFLAGS) -c -o liblzma_la-ia64.lo `test -f 'simple/ia64.c' || echo '$(srcdir)/'`simple/ia64.c
+
+liblzma_la-arm.lo: simple/arm.c
+@am__fastdepCC_TRUE@ $(LIBTOOL) --tag=CC $(AM_LIBTOOLFLAGS) $(LIBTOOLFLAGS) --mode=compile $(CC) $(DEFS) $(DEFAULT_INCLUDES) $(INCLUDES) $(liblzma_la_CPPFLAGS) $(CPPFLAGS) $(AM_CFLAGS) $(CFLAGS) -MT liblzma_la-arm.lo -MD -MP -MF $(DEPDIR)/liblzma_la-arm.Tpo -c -o liblzma_la-arm.lo `test -f 'simple/arm.c' || echo '$(srcdir)/'`simple/arm.c
+@am__fastdepCC_TRUE@ $(am__mv) $(DEPDIR)/liblzma_la-arm.Tpo $(DEPDIR)/liblzma_la-arm.Plo
+@AMDEP_TRUE@@am__fastdepCC_FALSE@ source='simple/arm.c' object='liblzma_la-arm.lo' libtool=yes @AMDEPBACKSLASH@
+@AMDEP_TRUE@@am__fastdepCC_FALSE@ DEPDIR=$(DEPDIR) $(CCDEPMODE) $(depcomp) @AMDEPBACKSLASH@
+@am__fastdepCC_FALSE@ $(LIBTOOL) --tag=CC $(AM_LIBTOOLFLAGS) $(LIBTOOLFLAGS) --mode=compile $(CC) $(DEFS) $(DEFAULT_INCLUDES) $(INCLUDES) $(liblzma_la_CPPFLAGS) $(CPPFLAGS) $(AM_CFLAGS) $(CFLAGS) -c -o liblzma_la-arm.lo `test -f 'simple/arm.c' || echo '$(srcdir)/'`simple/arm.c
+
+liblzma_la-armthumb.lo: simple/armthumb.c
+@am__fastdepCC_TRUE@ $(LIBTOOL) --tag=CC $(AM_LIBTOOLFLAGS) $(LIBTOOLFLAGS) --mode=compile $(CC) $(DEFS) $(DEFAULT_INCLUDES) $(INCLUDES) $(liblzma_la_CPPFLAGS) $(CPPFLAGS) $(AM_CFLAGS) $(CFLAGS) -MT liblzma_la-armthumb.lo -MD -MP -MF $(DEPDIR)/liblzma_la-armthumb.Tpo -c -o liblzma_la-armthumb.lo `test -f 'simple/armthumb.c' || echo '$(srcdir)/'`simple/armthumb.c
+@am__fastdepCC_TRUE@ $(am__mv) $(DEPDIR)/liblzma_la-armthumb.Tpo $(DEPDIR)/liblzma_la-armthumb.Plo
+@AMDEP_TRUE@@am__fastdepCC_FALSE@ source='simple/armthumb.c' object='liblzma_la-armthumb.lo' libtool=yes @AMDEPBACKSLASH@
+@AMDEP_TRUE@@am__fastdepCC_FALSE@ DEPDIR=$(DEPDIR) $(CCDEPMODE) $(depcomp) @AMDEPBACKSLASH@
+@am__fastdepCC_FALSE@ $(LIBTOOL) --tag=CC $(AM_LIBTOOLFLAGS) $(LIBTOOLFLAGS) --mode=compile $(CC) $(DEFS) $(DEFAULT_INCLUDES) $(INCLUDES) $(liblzma_la_CPPFLAGS) $(CPPFLAGS) $(AM_CFLAGS) $(CFLAGS) -c -o liblzma_la-armthumb.lo `test -f 'simple/armthumb.c' || echo '$(srcdir)/'`simple/armthumb.c
+
+liblzma_la-sparc.lo: simple/sparc.c
+@am__fastdepCC_TRUE@ $(LIBTOOL) --tag=CC $(AM_LIBTOOLFLAGS) $(LIBTOOLFLAGS) --mode=compile $(CC) $(DEFS) $(DEFAULT_INCLUDES) $(INCLUDES) $(liblzma_la_CPPFLAGS) $(CPPFLAGS) $(AM_CFLAGS) $(CFLAGS) -MT liblzma_la-sparc.lo -MD -MP -MF $(DEPDIR)/liblzma_la-sparc.Tpo -c -o liblzma_la-sparc.lo `test -f 'simple/sparc.c' || echo '$(srcdir)/'`simple/sparc.c
+@am__fastdepCC_TRUE@ $(am__mv) $(DEPDIR)/liblzma_la-sparc.Tpo $(DEPDIR)/liblzma_la-sparc.Plo
+@AMDEP_TRUE@@am__fastdepCC_FALSE@ source='simple/sparc.c' object='liblzma_la-sparc.lo' libtool=yes @AMDEPBACKSLASH@
+@AMDEP_TRUE@@am__fastdepCC_FALSE@ DEPDIR=$(DEPDIR) $(CCDEPMODE) $(depcomp) @AMDEPBACKSLASH@
+@am__fastdepCC_FALSE@ $(LIBTOOL) --tag=CC $(AM_LIBTOOLFLAGS) $(LIBTOOLFLAGS) --mode=compile $(CC) $(DEFS) $(DEFAULT_INCLUDES) $(INCLUDES) $(liblzma_la_CPPFLAGS) $(CPPFLAGS) $(AM_CFLAGS) $(CFLAGS) -c -o liblzma_la-sparc.lo `test -f 'simple/sparc.c' || echo '$(srcdir)/'`simple/sparc.c
+
+mostlyclean-libtool:
+ -rm -f *.lo
+
+clean-libtool:
+ -rm -rf .libs _libs
+install-docDATA: $(doc_DATA)
+ @$(NORMAL_INSTALL)
+ test -z "$(docdir)" || $(MKDIR_P) "$(DESTDIR)$(docdir)"
+ @list='$(doc_DATA)'; test -n "$(docdir)" || list=; \
+ for p in $$list; do \
+ if test -f "$$p"; then d=; else d="$(srcdir)/"; fi; \
+ echo "$$d$$p"; \
+ done | $(am__base_list) | \
+ while read files; do \
+ echo " $(INSTALL_DATA) $$files '$(DESTDIR)$(docdir)'"; \
+ $(INSTALL_DATA) $$files "$(DESTDIR)$(docdir)" || exit $$?; \
+ done
+
+uninstall-docDATA:
+ @$(NORMAL_UNINSTALL)
+ @list='$(doc_DATA)'; test -n "$(docdir)" || list=; \
+ files=`for p in $$list; do echo $$p; done | sed -e 's|^.*/||'`; \
+ test -n "$$files" || exit 0; \
+ echo " ( cd '$(DESTDIR)$(docdir)' && rm -f" $$files ")"; \
+ cd "$(DESTDIR)$(docdir)" && rm -f $$files
+install-pkgconfigDATA: $(pkgconfig_DATA)
+ @$(NORMAL_INSTALL)
+ test -z "$(pkgconfigdir)" || $(MKDIR_P) "$(DESTDIR)$(pkgconfigdir)"
+ @list='$(pkgconfig_DATA)'; test -n "$(pkgconfigdir)" || list=; \
+ for p in $$list; do \
+ if test -f "$$p"; then d=; else d="$(srcdir)/"; fi; \
+ echo "$$d$$p"; \
+ done | $(am__base_list) | \
+ while read files; do \
+ echo " $(INSTALL_DATA) $$files '$(DESTDIR)$(pkgconfigdir)'"; \
+ $(INSTALL_DATA) $$files "$(DESTDIR)$(pkgconfigdir)" || exit $$?; \
+ done
+
+uninstall-pkgconfigDATA:
+ @$(NORMAL_UNINSTALL)
+ @list='$(pkgconfig_DATA)'; test -n "$(pkgconfigdir)" || list=; \
+ files=`for p in $$list; do echo $$p; done | sed -e 's|^.*/||'`; \
+ test -n "$$files" || exit 0; \
+ echo " ( cd '$(DESTDIR)$(pkgconfigdir)' && rm -f" $$files ")"; \
+ cd "$(DESTDIR)$(pkgconfigdir)" && rm -f $$files
+
+# This directory's subdirectories are mostly independent; you can cd
+# into them and run `make' without going through this Makefile.
+# To change the values of `make' variables: instead of editing Makefiles,
+# (1) if the variable is set in `config.status', edit `config.status'
+# (which will cause the Makefiles to be regenerated when you run `make');
+# (2) otherwise, pass the desired values on the `make' command line.
+$(RECURSIVE_TARGETS):
+ @failcom='exit 1'; \
+ for f in x $$MAKEFLAGS; do \
+ case $$f in \
+ *=* | --[!k]*);; \
+ *k*) failcom='fail=yes';; \
+ esac; \
+ done; \
+ dot_seen=no; \
+ target=`echo $@ | sed s/-recursive//`; \
+ list='$(SUBDIRS)'; for subdir in $$list; do \
+ echo "Making $$target in $$subdir"; \
+ if test "$$subdir" = "."; then \
+ dot_seen=yes; \
+ local_target="$$target-am"; \
+ else \
+ local_target="$$target"; \
+ fi; \
+ ($(am__cd) $$subdir && $(MAKE) $(AM_MAKEFLAGS) $$local_target) \
+ || eval $$failcom; \
+ done; \
+ if test "$$dot_seen" = "no"; then \
+ $(MAKE) $(AM_MAKEFLAGS) "$$target-am" || exit 1; \
+ fi; test -z "$$fail"
+
+$(RECURSIVE_CLEAN_TARGETS):
+ @failcom='exit 1'; \
+ for f in x $$MAKEFLAGS; do \
+ case $$f in \
+ *=* | --[!k]*);; \
+ *k*) failcom='fail=yes';; \
+ esac; \
+ done; \
+ dot_seen=no; \
+ case "$@" in \
+ distclean-* | maintainer-clean-*) list='$(DIST_SUBDIRS)' ;; \
+ *) list='$(SUBDIRS)' ;; \
+ esac; \
+ rev=''; for subdir in $$list; do \
+ if test "$$subdir" = "."; then :; else \
+ rev="$$subdir $$rev"; \
+ fi; \
+ done; \
+ rev="$$rev ."; \
+ target=`echo $@ | sed s/-recursive//`; \
+ for subdir in $$rev; do \
+ echo "Making $$target in $$subdir"; \
+ if test "$$subdir" = "."; then \
+ local_target="$$target-am"; \
+ else \
+ local_target="$$target"; \
+ fi; \
+ ($(am__cd) $$subdir && $(MAKE) $(AM_MAKEFLAGS) $$local_target) \
+ || eval $$failcom; \
+ done && test -z "$$fail"
+tags-recursive:
+ list='$(SUBDIRS)'; for subdir in $$list; do \
+ test "$$subdir" = . || ($(am__cd) $$subdir && $(MAKE) $(AM_MAKEFLAGS) tags); \
+ done
+ctags-recursive:
+ list='$(SUBDIRS)'; for subdir in $$list; do \
+ test "$$subdir" = . || ($(am__cd) $$subdir && $(MAKE) $(AM_MAKEFLAGS) ctags); \
+ done
+
+ID: $(HEADERS) $(SOURCES) $(LISP) $(TAGS_FILES)
+ list='$(SOURCES) $(HEADERS) $(LISP) $(TAGS_FILES)'; \
+ unique=`for i in $$list; do \
+ if test -f "$$i"; then echo $$i; else echo $(srcdir)/$$i; fi; \
+ done | \
+ $(AWK) '{ files[$$0] = 1; nonempty = 1; } \
+ END { if (nonempty) { for (i in files) print i; }; }'`; \
+ mkid -fID $$unique
+tags: TAGS
+
+TAGS: tags-recursive $(HEADERS) $(SOURCES) $(TAGS_DEPENDENCIES) \
+ $(TAGS_FILES) $(LISP)
+ set x; \
+ here=`pwd`; \
+ if ($(ETAGS) --etags-include --version) >/dev/null 2>&1; then \
+ include_option=--etags-include; \
+ empty_fix=.; \
+ else \
+ include_option=--include; \
+ empty_fix=; \
+ fi; \
+ list='$(SUBDIRS)'; for subdir in $$list; do \
+ if test "$$subdir" = .; then :; else \
+ test ! -f $$subdir/TAGS || \
+ set "$$@" "$$include_option=$$here/$$subdir/TAGS"; \
+ fi; \
+ done; \
+ list='$(SOURCES) $(HEADERS) $(LISP) $(TAGS_FILES)'; \
+ unique=`for i in $$list; do \
+ if test -f "$$i"; then echo $$i; else echo $(srcdir)/$$i; fi; \
+ done | \
+ $(AWK) '{ files[$$0] = 1; nonempty = 1; } \
+ END { if (nonempty) { for (i in files) print i; }; }'`; \
+ shift; \
+ if test -z "$(ETAGS_ARGS)$$*$$unique"; then :; else \
+ test -n "$$unique" || unique=$$empty_fix; \
+ if test $$# -gt 0; then \
+ $(ETAGS) $(ETAGSFLAGS) $(AM_ETAGSFLAGS) $(ETAGS_ARGS) \
+ "$$@" $$unique; \
+ else \
+ $(ETAGS) $(ETAGSFLAGS) $(AM_ETAGSFLAGS) $(ETAGS_ARGS) \
+ $$unique; \
+ fi; \
+ fi
+ctags: CTAGS
+CTAGS: ctags-recursive $(HEADERS) $(SOURCES) $(TAGS_DEPENDENCIES) \
+ $(TAGS_FILES) $(LISP)
+ list='$(SOURCES) $(HEADERS) $(LISP) $(TAGS_FILES)'; \
+ unique=`for i in $$list; do \
+ if test -f "$$i"; then echo $$i; else echo $(srcdir)/$$i; fi; \
+ done | \
+ $(AWK) '{ files[$$0] = 1; nonempty = 1; } \
+ END { if (nonempty) { for (i in files) print i; }; }'`; \
+ test -z "$(CTAGS_ARGS)$$unique" \
+ || $(CTAGS) $(CTAGSFLAGS) $(AM_CTAGSFLAGS) $(CTAGS_ARGS) \
+ $$unique
+
+GTAGS:
+ here=`$(am__cd) $(top_builddir) && pwd` \
+ && $(am__cd) $(top_srcdir) \
+ && gtags -i $(GTAGS_ARGS) "$$here"
+
+distclean-tags:
+ -rm -f TAGS ID GTAGS GRTAGS GSYMS GPATH tags
+
+distdir: $(DISTFILES)
+ @srcdirstrip=`echo "$(srcdir)" | sed 's/[].[^$$\\*]/\\\\&/g'`; \
+ topsrcdirstrip=`echo "$(top_srcdir)" | sed 's/[].[^$$\\*]/\\\\&/g'`; \
+ list='$(DISTFILES)'; \
+ dist_files=`for file in $$list; do echo $$file; done | \
+ sed -e "s|^$$srcdirstrip/||;t" \
+ -e "s|^$$topsrcdirstrip/|$(top_builddir)/|;t"`; \
+ case $$dist_files in \
+ */*) $(MKDIR_P) `echo "$$dist_files" | \
+ sed '/\//!d;s|^|$(distdir)/|;s,/[^/]*$$,,' | \
+ sort -u` ;; \
+ esac; \
+ for file in $$dist_files; do \
+ if test -f $$file || test -d $$file; then d=.; else d=$(srcdir); fi; \
+ if test -d $$d/$$file; then \
+ dir=`echo "/$$file" | sed -e 's,/[^/]*$$,,'`; \
+ if test -d "$(distdir)/$$file"; then \
+ find "$(distdir)/$$file" -type d ! -perm -700 -exec chmod u+rwx {} \;; \
+ fi; \
+ if test -d $(srcdir)/$$file && test $$d != $(srcdir); then \
+ cp -fpR $(srcdir)/$$file "$(distdir)$$dir" || exit 1; \
+ find "$(distdir)/$$file" -type d ! -perm -700 -exec chmod u+rwx {} \;; \
+ fi; \
+ cp -fpR $$d/$$file "$(distdir)$$dir" || exit 1; \
+ else \
+ test -f "$(distdir)/$$file" \
+ || cp -p $$d/$$file "$(distdir)/$$file" \
+ || exit 1; \
+ fi; \
+ done
+ @list='$(DIST_SUBDIRS)'; for subdir in $$list; do \
+ if test "$$subdir" = .; then :; else \
+ test -d "$(distdir)/$$subdir" \
+ || $(MKDIR_P) "$(distdir)/$$subdir" \
+ || exit 1; \
+ fi; \
+ done
+ @list='$(DIST_SUBDIRS)'; for subdir in $$list; do \
+ if test "$$subdir" = .; then :; else \
+ dir1=$$subdir; dir2="$(distdir)/$$subdir"; \
+ $(am__relativize); \
+ new_distdir=$$reldir; \
+ dir1=$$subdir; dir2="$(top_distdir)"; \
+ $(am__relativize); \
+ new_top_distdir=$$reldir; \
+ echo " (cd $$subdir && $(MAKE) $(AM_MAKEFLAGS) top_distdir="$$new_top_distdir" distdir="$$new_distdir" \\"; \
+ echo " am__remove_distdir=: am__skip_length_check=: am__skip_mode_fix=: distdir)"; \
+ ($(am__cd) $$subdir && \
+ $(MAKE) $(AM_MAKEFLAGS) \
+ top_distdir="$$new_top_distdir" \
+ distdir="$$new_distdir" \
+ am__remove_distdir=: \
+ am__skip_length_check=: \
+ am__skip_mode_fix=: \
+ distdir) \
+ || exit 1; \
+ fi; \
+ done
+check-am: all-am
+check: check-recursive
+all-am: Makefile $(LTLIBRARIES) $(DATA)
+installdirs: installdirs-recursive
+installdirs-am:
+ for dir in "$(DESTDIR)$(libdir)" "$(DESTDIR)$(docdir)" "$(DESTDIR)$(pkgconfigdir)"; do \
+ test -z "$$dir" || $(MKDIR_P) "$$dir"; \
+ done
+install: install-recursive
+install-exec: install-exec-recursive
+install-data: install-data-recursive
+uninstall: uninstall-recursive
+
+install-am: all-am
+ @$(MAKE) $(AM_MAKEFLAGS) install-exec-am install-data-am
+
+installcheck: installcheck-recursive
+install-strip:
+ $(MAKE) $(AM_MAKEFLAGS) INSTALL_PROGRAM="$(INSTALL_STRIP_PROGRAM)" \
+ install_sh_PROGRAM="$(INSTALL_STRIP_PROGRAM)" INSTALL_STRIP_FLAG=-s \
+ `test -z '$(STRIP)' || \
+ echo "INSTALL_PROGRAM_ENV=STRIPPROG='$(STRIP)'"` install
+mostlyclean-generic:
+
+clean-generic:
+ -test -z "$(CLEANFILES)" || rm -f $(CLEANFILES)
+
+distclean-generic:
+ -test -z "$(CONFIG_CLEAN_FILES)" || rm -f $(CONFIG_CLEAN_FILES)
+ -test . = "$(srcdir)" || test -z "$(CONFIG_CLEAN_VPATH_FILES)" || rm -f $(CONFIG_CLEAN_VPATH_FILES)
+
+maintainer-clean-generic:
+ @echo "This command is intended for maintainers to use"
+ @echo "it deletes files that may require special tools to rebuild."
+clean: clean-recursive
+
+clean-am: clean-generic clean-libLTLIBRARIES clean-libtool \
+ mostlyclean-am
+
+distclean: distclean-recursive
+ -rm -rf ./$(DEPDIR)
+ -rm -f Makefile
+distclean-am: clean-am distclean-compile distclean-generic \
+ distclean-tags
+
+dvi: dvi-recursive
+
+dvi-am:
+
+html: html-recursive
+
+html-am:
+
+info: info-recursive
+
+info-am:
+
+install-data-am: install-docDATA install-pkgconfigDATA
+
+install-dvi: install-dvi-recursive
+
+install-dvi-am:
+
+install-exec-am: install-libLTLIBRARIES
+
+install-html: install-html-recursive
+
+install-html-am:
+
+install-info: install-info-recursive
+
+install-info-am:
+
+install-man:
+
+install-pdf: install-pdf-recursive
+
+install-pdf-am:
+
+install-ps: install-ps-recursive
+
+install-ps-am:
+
+installcheck-am:
+
+maintainer-clean: maintainer-clean-recursive
+ -rm -rf ./$(DEPDIR)
+ -rm -f Makefile
+maintainer-clean-am: distclean-am maintainer-clean-generic
+
+mostlyclean: mostlyclean-recursive
+
+mostlyclean-am: mostlyclean-compile mostlyclean-generic \
+ mostlyclean-libtool
+
+pdf: pdf-recursive
+
+pdf-am:
+
+ps: ps-recursive
+
+ps-am:
+
+uninstall-am: uninstall-docDATA uninstall-libLTLIBRARIES \
+ uninstall-pkgconfigDATA
+
+.MAKE: $(RECURSIVE_CLEAN_TARGETS) $(RECURSIVE_TARGETS) ctags-recursive \
+ install-am install-strip tags-recursive
+
+.PHONY: $(RECURSIVE_CLEAN_TARGETS) $(RECURSIVE_TARGETS) CTAGS GTAGS \
+ all all-am check check-am clean clean-generic \
+ clean-libLTLIBRARIES clean-libtool ctags ctags-recursive \
+ distclean distclean-compile distclean-generic \
+ distclean-libtool distclean-tags distdir dvi dvi-am html \
+ html-am info info-am install install-am install-data \
+ install-data-am install-docDATA install-dvi install-dvi-am \
+ install-exec install-exec-am install-html install-html-am \
+ install-info install-info-am install-libLTLIBRARIES \
+ install-man install-pdf install-pdf-am install-pkgconfigDATA \
+ install-ps install-ps-am install-strip installcheck \
+ installcheck-am installdirs installdirs-am maintainer-clean \
+ maintainer-clean-generic mostlyclean mostlyclean-compile \
+ mostlyclean-generic mostlyclean-libtool pdf pdf-am ps ps-am \
+ tags tags-recursive uninstall uninstall-am uninstall-docDATA \
+ uninstall-libLTLIBRARIES uninstall-pkgconfigDATA
+
+
+# Windows resource compiler support. libtool knows what to do with .rc
+# files, but Automake (<= 1.11 at least) doesn't know.
+#
+# We want the resource file only in shared liblzma. To avoid linking it into
+# static liblzma, we overwrite the static object file with an object file
+# compiled from empty input. Note that GNU-specific features are OK here,
+# because on Windows we are compiled with the GNU toolchain.
+.rc.lo:
+ $(LIBTOOL) --mode=compile $(RC) $(DEFS) $(DEFAULT_INCLUDES) \
+ $(INCLUDES) $(liblzma_la_CPPFLAGS) $(CPPFLAGS) $(RCFLAGS) \
+ -i $< -o $@
+ echo > empty.c
+ $(COMPILE) -c empty.c -o $(*D)/$(*F).o
+
+# Remove ordinals from the generated .def file. People must link by name,
+# not by ordinal, because no one is going to track the ordinal numbers.
+liblzma.def: liblzma.la liblzma.def.in
+ sed 's/ \+@ *[0-9]\+//' liblzma.def.in > liblzma.def
+
+# Creating liblzma.def.in is a side effect of linking the library.
+liblzma.def.in: liblzma.la
+
+# Tell versions [3.59,3.63) of GNU make to not export all variables.
+# Otherwise a system limit (for SysV at least) may be exceeded.
+.NOEXPORT:
diff --git a/Build/source/utils/xz-4.999.9beta/src/liblzma/api/Makefile.am b/Build/source/utils/xz-4.999.9beta/src/liblzma/api/Makefile.am
new file mode 100644
index 00000000000..0992d221044
--- /dev/null
+++ b/Build/source/utils/xz-4.999.9beta/src/liblzma/api/Makefile.am
@@ -0,0 +1,23 @@
+##
+## Author: Lasse Collin
+##
+## This file has been put into the public domain.
+## You can do whatever you want with this file.
+##
+
+nobase_include_HEADERS = \
+ lzma.h \
+ lzma/base.h \
+ lzma/bcj.h \
+ lzma/block.h \
+ lzma/check.h \
+ lzma/container.h \
+ lzma/delta.h \
+ lzma/filter.h \
+ lzma/index.h \
+ lzma/index_hash.h \
+ lzma/lzma.h \
+ lzma/stream_flags.h \
+ lzma/subblock.h \
+ lzma/version.h \
+ lzma/vli.h
diff --git a/Build/source/utils/xz-4.999.8beta/src/liblzma/api/Makefile.in b/Build/source/utils/xz-4.999.9beta/src/liblzma/api/Makefile.in
index 52dc8d735dc..f4f9a3e7302 100644
--- a/Build/source/utils/xz-4.999.8beta/src/liblzma/api/Makefile.in
+++ b/Build/source/utils/xz-4.999.9beta/src/liblzma/api/Makefile.in
@@ -1,8 +1,9 @@
-# Makefile.in generated by automake 1.10.2 from Makefile.am.
+# Makefile.in generated by automake 1.11 from Makefile.am.
# @configure_input@
# Copyright (C) 1994, 1995, 1996, 1997, 1998, 1999, 2000, 2001, 2002,
-# 2003, 2004, 2005, 2006, 2007, 2008 Free Software Foundation, Inc.
+# 2003, 2004, 2005, 2006, 2007, 2008, 2009 Free Software Foundation,
+# Inc.
# This Makefile.in is free software; the Free Software Foundation
# gives unlimited permission to copy and/or distribute it,
# with or without modifications, as long as this notice is preserved.
@@ -16,8 +17,9 @@
VPATH = @srcdir@
pkgdatadir = $(datadir)/@PACKAGE@
-pkglibdir = $(libdir)/@PACKAGE@
pkgincludedir = $(includedir)/@PACKAGE@
+pkglibdir = $(libdir)/@PACKAGE@
+pkglibexecdir = $(libexecdir)/@PACKAGE@
am__cd = CDPATH="$${ZSH_VERSION+.}$(PATH_SEPARATOR)" && cd
install_sh_DATA = $(install_sh) -c -m 644
install_sh_PROGRAM = $(install_sh) -c
@@ -38,15 +40,21 @@ DIST_COMMON = $(nobase_include_HEADERS) $(srcdir)/Makefile.am \
ACLOCAL_M4 = $(top_srcdir)/aclocal.m4
am__aclocal_m4_deps = $(top_srcdir)/m4/acx_pthread.m4 \
$(top_srcdir)/m4/getopt.m4 $(top_srcdir)/m4/gettext.m4 \
- $(top_srcdir)/m4/iconv.m4 $(top_srcdir)/m4/lib-ld.m4 \
+ $(top_srcdir)/m4/iconv.m4 $(top_srcdir)/m4/lc_cpucores.m4 \
+ $(top_srcdir)/m4/lc_physmem.m4 $(top_srcdir)/m4/lib-ld.m4 \
$(top_srcdir)/m4/lib-link.m4 $(top_srcdir)/m4/lib-prefix.m4 \
- $(top_srcdir)/m4/nls.m4 $(top_srcdir)/m4/po.m4 \
- $(top_srcdir)/m4/progtest.m4 $(top_srcdir)/configure.ac
+ $(top_srcdir)/m4/libtool.m4 $(top_srcdir)/m4/ltoptions.m4 \
+ $(top_srcdir)/m4/ltsugar.m4 $(top_srcdir)/m4/ltversion.m4 \
+ $(top_srcdir)/m4/lt~obsolete.m4 $(top_srcdir)/m4/nls.m4 \
+ $(top_srcdir)/m4/po.m4 $(top_srcdir)/m4/posix-shell.m4 \
+ $(top_srcdir)/m4/progtest.m4 $(top_srcdir)/m4/visibility.m4 \
+ $(top_srcdir)/configure.ac
am__configure_deps = $(am__aclocal_m4_deps) $(CONFIGURE_DEPENDENCIES) \
$(ACLOCAL_M4)
mkinstalldirs = $(install_sh) -d
CONFIG_HEADER = $(top_builddir)/config.h
CONFIG_CLEAN_FILES =
+CONFIG_CLEAN_VPATH_FILES =
SOURCES =
DIST_SOURCES =
am__vpath_adj_setup = srcdirstrip=`echo "$(srcdir)" | sed 's|.|.|g'`;
@@ -54,16 +62,32 @@ am__vpath_adj = case $$p in \
$(srcdir)/*) f=`echo "$$p" | sed "s|^$$srcdirstrip/||"`;; \
*) f=$$p;; \
esac;
-am__strip_dir = `echo $$p | sed -e 's|^.*/||'`;
+am__strip_dir = f=`echo $$p | sed -e 's|^.*/||'`;
+am__install_max = 40
+am__nobase_strip_setup = \
+ srcdirstrip=`echo "$(srcdir)" | sed 's/[].[^$$\\*|]/\\\\&/g'`
+am__nobase_strip = \
+ for p in $$list; do echo "$$p"; done | sed -e "s|$$srcdirstrip/||"
+am__nobase_list = $(am__nobase_strip_setup); \
+ for p in $$list; do echo "$$p $$p"; done | \
+ sed "s| $$srcdirstrip/| |;"' / .*\//!s/ .*/ ./; s,\( .*\)/[^/]*$$,\1,' | \
+ $(AWK) 'BEGIN { files["."] = "" } { files[$$2] = files[$$2] " " $$1; \
+ if (++n[$$2] == $(am__install_max)) \
+ { print $$2, files[$$2]; n[$$2] = 0; files[$$2] = "" } } \
+ END { for (dir in files) print dir, files[dir] }'
+am__base_list = \
+ sed '$$!N;$$!N;$$!N;$$!N;$$!N;$$!N;$$!N;s/\n/ /g' | \
+ sed '$$!N;$$!N;$$!N;$$!N;s/\n/ /g'
am__installdirs = "$(DESTDIR)$(includedir)"
-nobase_includeHEADERS_INSTALL = $(install_sh_DATA)
HEADERS = $(nobase_include_HEADERS)
ETAGS = etags
CTAGS = ctags
DISTFILES = $(DIST_COMMON) $(DIST_SOURCES) $(TEXINFOS) $(EXTRA_DIST)
ACLOCAL = @ACLOCAL@
AMTAR = @AMTAR@
+AM_CFLAGS = @AM_CFLAGS@
AR = @AR@
+AS = @AS@
AUTOCONF = @AUTOCONF@
AUTOHEADER = @AUTOHEADER@
AUTOMAKE = @AUTOMAKE@
@@ -77,22 +101,20 @@ CFLAGS = @CFLAGS@
CFLAG_VISIBILITY = @CFLAG_VISIBILITY@
CPP = @CPP@
CPPFLAGS = @CPPFLAGS@
-CXX = @CXX@
-CXXCPP = @CXXCPP@
-CXXDEPMODE = @CXXDEPMODE@
-CXXFLAGS = @CXXFLAGS@
CYGPATH_W = @CYGPATH_W@
DEFS = @DEFS@
DEPDIR = @DEPDIR@
+DLLTOOL = @DLLTOOL@
DSYMUTIL = @DSYMUTIL@
-ECHO = @ECHO@
+DUMPBIN = @DUMPBIN@
+DYNAMIC_CPPFLAGS = @DYNAMIC_CPPFLAGS@
+DYNAMIC_LDFLAGS = @DYNAMIC_LDFLAGS@
ECHO_C = @ECHO_C@
ECHO_N = @ECHO_N@
ECHO_T = @ECHO_T@
EGREP = @EGREP@
EXEEXT = @EXEEXT@
-F77 = @F77@
-FFLAGS = @FFLAGS@
+FGREP = @FGREP@
GETOPT_H = @GETOPT_H@
GMSGFMT = @GMSGFMT@
GMSGFMT_015 = @GMSGFMT_015@
@@ -105,12 +127,14 @@ INSTALL_SCRIPT = @INSTALL_SCRIPT@
INSTALL_STRIP_PROGRAM = @INSTALL_STRIP_PROGRAM@
INTLLIBS = @INTLLIBS@
INTL_MACOSX_LIBS = @INTL_MACOSX_LIBS@
+LD = @LD@
LDFLAGS = @LDFLAGS@
LIBICONV = @LIBICONV@
LIBINTL = @LIBINTL@
LIBOBJS = @LIBOBJS@
LIBS = @LIBS@
LIBTOOL = @LIBTOOL@
+LIPO = @LIPO@
LN_S = @LN_S@
LTLIBICONV = @LTLIBICONV@
LTLIBINTL = @LTLIBINTL@
@@ -120,23 +144,34 @@ MKDIR_P = @MKDIR_P@
MSGFMT = @MSGFMT@
MSGFMT_015 = @MSGFMT_015@
MSGMERGE = @MSGMERGE@
+NM = @NM@
NMEDIT = @NMEDIT@
+OBJDUMP = @OBJDUMP@
OBJEXT = @OBJEXT@
+OTOOL = @OTOOL@
+OTOOL64 = @OTOOL64@
PACKAGE = @PACKAGE@
PACKAGE_BUGREPORT = @PACKAGE_BUGREPORT@
+PACKAGE_HOMEPAGE = @PACKAGE_HOMEPAGE@
PACKAGE_NAME = @PACKAGE_NAME@
PACKAGE_STRING = @PACKAGE_STRING@
PACKAGE_TARNAME = @PACKAGE_TARNAME@
+PACKAGE_URL = @PACKAGE_URL@
PACKAGE_VERSION = @PACKAGE_VERSION@
PATH_SEPARATOR = @PATH_SEPARATOR@
+POSIX_SHELL = @POSIX_SHELL@
POSUB = @POSUB@
+PREFERABLY_POSIX_SHELL = @PREFERABLY_POSIX_SHELL@
PTHREAD_CC = @PTHREAD_CC@
PTHREAD_CFLAGS = @PTHREAD_CFLAGS@
PTHREAD_LIBS = @PTHREAD_LIBS@
RANLIB = @RANLIB@
+RC = @RC@
SED = @SED@
SET_MAKE = @SET_MAKE@
SHELL = @SHELL@
+STATIC_CPPFLAGS = @STATIC_CPPFLAGS@
+STATIC_LDFLAGS = @STATIC_LDFLAGS@
STRIP = @STRIP@
USE_NLS = @USE_NLS@
VERSION = @VERSION@
@@ -147,8 +182,7 @@ abs_srcdir = @abs_srcdir@
abs_top_builddir = @abs_top_builddir@
abs_top_srcdir = @abs_top_srcdir@
ac_ct_CC = @ac_ct_CC@
-ac_ct_CXX = @ac_ct_CXX@
-ac_ct_F77 = @ac_ct_F77@
+ac_ct_DUMPBIN = @ac_ct_DUMPBIN@
acx_pthread_config = @acx_pthread_config@
am__include = @am__include@
am__leading_dot = @am__leading_dot@
@@ -180,6 +214,7 @@ libdir = @libdir@
libexecdir = @libexecdir@
localedir = @localedir@
localstatedir = @localstatedir@
+lt_ECHO = @lt_ECHO@
mandir = @mandir@
mkdir_p = @mkdir_p@
oldincludedir = @oldincludedir@
@@ -195,6 +230,7 @@ target_alias = @target_alias@
top_build_prefix = @top_build_prefix@
top_builddir = @top_builddir@
top_srcdir = @top_srcdir@
+xz = @xz@
nobase_include_HEADERS = \
lzma.h \
lzma/base.h \
@@ -224,9 +260,9 @@ $(srcdir)/Makefile.in: $(srcdir)/Makefile.am $(am__configure_deps)
exit 1;; \
esac; \
done; \
- echo ' cd $(top_srcdir) && $(AUTOMAKE) --foreign src/liblzma/api/Makefile'; \
- cd $(top_srcdir) && \
- $(AUTOMAKE) --foreign src/liblzma/api/Makefile
+ echo ' cd $(top_srcdir) && $(AUTOMAKE) --foreign src/liblzma/api/Makefile'; \
+ $(am__cd) $(top_srcdir) && \
+ $(AUTOMAKE) --foreign src/liblzma/api/Makefile
.PRECIOUS: Makefile
Makefile: $(srcdir)/Makefile.in $(top_builddir)/config.status
@case '$?' in \
@@ -244,6 +280,7 @@ $(top_srcdir)/configure: $(am__configure_deps)
cd $(top_builddir) && $(MAKE) $(AM_MAKEFLAGS) am--refresh
$(ACLOCAL_M4): $(am__aclocal_m4_deps)
cd $(top_builddir) && $(MAKE) $(AM_MAKEFLAGS) am--refresh
+$(am__aclocal_m4_deps):
mostlyclean-libtool:
-rm -f *.lo
@@ -253,22 +290,26 @@ clean-libtool:
install-nobase_includeHEADERS: $(nobase_include_HEADERS)
@$(NORMAL_INSTALL)
test -z "$(includedir)" || $(MKDIR_P) "$(DESTDIR)$(includedir)"
- @$(am__vpath_adj_setup) \
- list='$(nobase_include_HEADERS)'; for p in $$list; do \
- if test -f "$$p"; then d=; else d="$(srcdir)/"; fi; \
- $(am__vpath_adj) \
- echo " $(nobase_includeHEADERS_INSTALL) '$$d$$p' '$(DESTDIR)$(includedir)/$$f'"; \
- $(nobase_includeHEADERS_INSTALL) "$$d$$p" "$(DESTDIR)$(includedir)/$$f"; \
+ @list='$(nobase_include_HEADERS)'; test -n "$(includedir)" || list=; \
+ $(am__nobase_list) | while read dir files; do \
+ xfiles=; for file in $$files; do \
+ if test -f "$$file"; then xfiles="$$xfiles $$file"; \
+ else xfiles="$$xfiles $(srcdir)/$$file"; fi; done; \
+ test -z "$$xfiles" || { \
+ test "x$$dir" = x. || { \
+ echo "$(MKDIR_P) '$(DESTDIR)$(includedir)/$$dir'"; \
+ $(MKDIR_P) "$(DESTDIR)$(includedir)/$$dir"; }; \
+ echo " $(INSTALL_HEADER) $$xfiles '$(DESTDIR)$(includedir)/$$dir'"; \
+ $(INSTALL_HEADER) $$xfiles "$(DESTDIR)$(includedir)/$$dir" || exit $$?; }; \
done
uninstall-nobase_includeHEADERS:
@$(NORMAL_UNINSTALL)
- @$(am__vpath_adj_setup) \
- list='$(nobase_include_HEADERS)'; for p in $$list; do \
- $(am__vpath_adj) \
- echo " rm -f '$(DESTDIR)$(includedir)/$$f'"; \
- rm -f "$(DESTDIR)$(includedir)/$$f"; \
- done
+ @list='$(nobase_include_HEADERS)'; test -n "$(includedir)" || list=; \
+ $(am__nobase_strip_setup); files=`$(am__nobase_strip)`; \
+ test -n "$$files" || exit 0; \
+ echo " ( cd '$(DESTDIR)$(includedir)' && rm -f" $$files ")"; \
+ cd "$(DESTDIR)$(includedir)" && rm -f $$files
ID: $(HEADERS) $(SOURCES) $(LISP) $(TAGS_FILES)
list='$(SOURCES) $(HEADERS) $(LISP) $(TAGS_FILES)'; \
@@ -282,7 +323,7 @@ tags: TAGS
TAGS: $(HEADERS) $(SOURCES) $(TAGS_DEPENDENCIES) \
$(TAGS_FILES) $(LISP)
- tags=; \
+ set x; \
here=`pwd`; \
list='$(SOURCES) $(HEADERS) $(LISP) $(TAGS_FILES)'; \
unique=`for i in $$list; do \
@@ -290,29 +331,34 @@ TAGS: $(HEADERS) $(SOURCES) $(TAGS_DEPENDENCIES) \
done | \
$(AWK) '{ files[$$0] = 1; nonempty = 1; } \
END { if (nonempty) { for (i in files) print i; }; }'`; \
- if test -z "$(ETAGS_ARGS)$$tags$$unique"; then :; else \
+ shift; \
+ if test -z "$(ETAGS_ARGS)$$*$$unique"; then :; else \
test -n "$$unique" || unique=$$empty_fix; \
- $(ETAGS) $(ETAGSFLAGS) $(AM_ETAGSFLAGS) $(ETAGS_ARGS) \
- $$tags $$unique; \
+ if test $$# -gt 0; then \
+ $(ETAGS) $(ETAGSFLAGS) $(AM_ETAGSFLAGS) $(ETAGS_ARGS) \
+ "$$@" $$unique; \
+ else \
+ $(ETAGS) $(ETAGSFLAGS) $(AM_ETAGSFLAGS) $(ETAGS_ARGS) \
+ $$unique; \
+ fi; \
fi
ctags: CTAGS
CTAGS: $(HEADERS) $(SOURCES) $(TAGS_DEPENDENCIES) \
$(TAGS_FILES) $(LISP)
- tags=; \
list='$(SOURCES) $(HEADERS) $(LISP) $(TAGS_FILES)'; \
unique=`for i in $$list; do \
if test -f "$$i"; then echo $$i; else echo $(srcdir)/$$i; fi; \
done | \
$(AWK) '{ files[$$0] = 1; nonempty = 1; } \
END { if (nonempty) { for (i in files) print i; }; }'`; \
- test -z "$(CTAGS_ARGS)$$tags$$unique" \
+ test -z "$(CTAGS_ARGS)$$unique" \
|| $(CTAGS) $(CTAGSFLAGS) $(AM_CTAGSFLAGS) $(CTAGS_ARGS) \
- $$tags $$unique
+ $$unique
GTAGS:
here=`$(am__cd) $(top_builddir) && pwd` \
- && cd $(top_srcdir) \
- && gtags -i $(GTAGS_ARGS) $$here
+ && $(am__cd) $(top_srcdir) \
+ && gtags -i $(GTAGS_ARGS) "$$here"
distclean-tags:
-rm -f TAGS ID GTAGS GRTAGS GSYMS GPATH tags
@@ -333,13 +379,17 @@ distdir: $(DISTFILES)
if test -f $$file || test -d $$file; then d=.; else d=$(srcdir); fi; \
if test -d $$d/$$file; then \
dir=`echo "/$$file" | sed -e 's,/[^/]*$$,,'`; \
+ if test -d "$(distdir)/$$file"; then \
+ find "$(distdir)/$$file" -type d ! -perm -700 -exec chmod u+rwx {} \;; \
+ fi; \
if test -d $(srcdir)/$$file && test $$d != $(srcdir); then \
- cp -pR $(srcdir)/$$file $(distdir)$$dir || exit 1; \
+ cp -fpR $(srcdir)/$$file "$(distdir)$$dir" || exit 1; \
+ find "$(distdir)/$$file" -type d ! -perm -700 -exec chmod u+rwx {} \;; \
fi; \
- cp -pR $$d/$$file $(distdir)$$dir || exit 1; \
+ cp -fpR $$d/$$file "$(distdir)$$dir" || exit 1; \
else \
- test -f $(distdir)/$$file \
- || cp -p $$d/$$file $(distdir)/$$file \
+ test -f "$(distdir)/$$file" \
+ || cp -p $$d/$$file "$(distdir)/$$file" \
|| exit 1; \
fi; \
done
@@ -370,6 +420,7 @@ clean-generic:
distclean-generic:
-test -z "$(CONFIG_CLEAN_FILES)" || rm -f $(CONFIG_CLEAN_FILES)
+ -test . = "$(srcdir)" || test -z "$(CONFIG_CLEAN_VPATH_FILES)" || rm -f $(CONFIG_CLEAN_VPATH_FILES)
maintainer-clean-generic:
@echo "This command is intended for maintainers to use"
@@ -388,6 +439,8 @@ dvi-am:
html: html-am
+html-am:
+
info: info-am
info-am:
@@ -396,18 +449,28 @@ install-data-am: install-nobase_includeHEADERS
install-dvi: install-dvi-am
+install-dvi-am:
+
install-exec-am:
install-html: install-html-am
+install-html-am:
+
install-info: install-info-am
+install-info-am:
+
install-man:
install-pdf: install-pdf-am
+install-pdf-am:
+
install-ps: install-ps-am
+install-ps-am:
+
installcheck-am:
maintainer-clean: maintainer-clean-am
@@ -443,6 +506,7 @@ uninstall-am: uninstall-nobase_includeHEADERS
mostlyclean-generic mostlyclean-libtool pdf pdf-am ps ps-am \
tags uninstall uninstall-am uninstall-nobase_includeHEADERS
+
# Tell versions [3.59,3.63) of GNU make to not export all variables.
# Otherwise a system limit (for SysV at least) may be exceeded.
.NOEXPORT:
diff --git a/Build/source/utils/xz-4.999.8beta/src/liblzma/api/lzma.h b/Build/source/utils/xz-4.999.9beta/src/liblzma/api/lzma.h
index c03a19ded42..44de60a16f5 100644
--- a/Build/source/utils/xz-4.999.8beta/src/liblzma/api/lzma.h
+++ b/Build/source/utils/xz-4.999.9beta/src/liblzma/api/lzma.h
@@ -1,22 +1,30 @@
/**
- * \file lzma.h
- * \brief The public API of liblzma
+ * \file api/lzma.h
+ * \brief The public API of liblzma data compression library
*
- * liblzma is a LZMA compression library with a zlib-like API.
- * liblzma is based on LZMA SDK found from http://7-zip.org/sdk.html.
+ * liblzma is a public domain general-purpose data compression library with
+ * a zlib-like API. The native file format is .xz, but also the old .lzma
+ * format and raw (no headers) streams are supported. Multiple compression
+ * algorithms (filters) are supported. Currently LZMA2 is the primary filter.
*
- * \author Copyright (C) 1999-2006 Igor Pavlov
- * \author Copyright (C) 2007 Lasse Collin
+ * liblzma is part of XZ Utils <http://tukaani.org/xz/>. XZ Utils includes
+ * a gzip-like command line tool named xz and some other tools. XZ Utils
+ * is developed and maintained by Lasse Collin.
*
- * This library is free software; you can redistribute it and/or
- * modify it under the terms of the GNU Lesser General Public
- * License as published by the Free Software Foundation; either
- * version 2.1 of the License, or (at your option) any later version.
+ * Major parts of liblzma are based on Igor Pavlov's public domain LZMA SDK
+ * <http://7-zip.org/sdk.html>.
*
- * This library is distributed in the hope that it will be useful,
- * but WITHOUT ANY WARRANTY; without even the implied warranty of
- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the GNU
- * Lesser General Public License for more details.
+ * The SHA-256 implementation is based on the public domain code found from
+ * 7-Zip <http://7-zip.org/>, which has a modified version of the public
+ * domain SHA-256 code found from Crypto++ <http://www.cryptopp.com/>.
+ * The SHA-256 code in Crypto++ was written by Kevin Springle and Wei Dai.
+ */
+
+/*
+ * Author: Lasse Collin
+ *
+ * This file has been put into the public domain.
+ * You can do whatever you want with this file.
*/
#ifndef LZMA_H
@@ -26,7 +34,7 @@
* Required standard headers *
*****************************/
-/**
+/*
* liblzma API headers need some standard types and macros. To allow
* including lzma.h without requiring the application to include other
* headers first, lzma.h includes the required standard headers unless
@@ -155,14 +163,34 @@
/*
* Some systems require (or at least recommend) that the functions and
- * function pointers are declared specially in the headers.
+ * function pointers are declared specially in the headers. LZMA_API_IMPORT
+ * is for importing symbols and LZMA_API_CALL is to specify calling
+ * convention.
+ *
+ * By default it is assumed that the application will link dynamically
+ * against liblzma. #define LZMA_API_STATIC in your application if you
+ * want to link against static liblzma. If you don't care about portability
+ * to operating systems like Windows, or at least don't care about linking
+ * against static liblzma on them, don't worry about LZMA_API_STATIC. That
+ * is, most developers will never need to use LZMA_API_STATIC.
+ *
+ * Cygwin is a special case on Windows. We rely on GCC doing the right thing
+ * and thus don't use dllimport and don't specify the calling convention.
*/
-#ifdef _WIN32
-# define LZMA_API_IMPORT __declspec(dllimport)
-# define LZMA_API_CALL __cdecl
-#else
-# define LZMA_API_IMPORT
-# define LZMA_API_CALL
+#ifndef LZMA_API_IMPORT
+# if !defined(LZMA_API_STATIC) && defined(_WIN32) && !defined(__CYGWIN__)
+# define LZMA_API_IMPORT __declspec(dllimport)
+# else
+# define LZMA_API_IMPORT
+# endif
+#endif
+
+#ifndef LZMA_API_CALL
+# if defined(_WIN32) && !defined(__CYGWIN__)
+# define LZMA_API_CALL __cdecl
+# else
+# define LZMA_API_CALL
+# endif
#endif
#ifndef LZMA_API
@@ -170,6 +198,26 @@
#endif
+/***********
+ * nothrow *
+ ***********/
+
+/*
+ * None of the functions in liblzma may throw an exception. Even
+ * the functions that use callback functions won't throw exceptions,
+ * because liblzma would break if a callback function threw an exception.
+ */
+#ifndef lzma_nothrow
+# if defined(__cplusplus)
+# define lzma_nothrow throw()
+# elif __GNUC__ > 3 || (__GNUC__ == 3 && __GNUC_MINOR__ >= 4)
+# define lzma_nothrow __attribute__((__nothrow__))
+# else
+# define lzma_nothrow
+# endif
+#endif
+
+
/********************
* GNU C extensions *
********************/
diff --git a/Build/source/utils/xz-4.999.8beta/src/liblzma/api/lzma/base.h b/Build/source/utils/xz-4.999.9beta/src/liblzma/api/lzma/base.h
index d18088db45e..01555068659 100644
--- a/Build/source/utils/xz-4.999.8beta/src/liblzma/api/lzma/base.h
+++ b/Build/source/utils/xz-4.999.9beta/src/liblzma/api/lzma/base.h
@@ -1,19 +1,15 @@
/**
* \file lzma/base.h
- * \brief Data types and functions used in many places of the public API
- *
- * \author Copyright (C) 1999-2006 Igor Pavlov
- * \author Copyright (C) 2007 Lasse Collin
+ * \brief Data types and functions used in many places in liblzma API
+ */
+
+/*
+ * Author: Lasse Collin
*
- * This library is free software; you can redistribute it and/or
- * modify it under the terms of the GNU Lesser General Public
- * License as published by the Free Software Foundation; either
- * version 2.1 of the License, or (at your option) any later version.
+ * This file has been put into the public domain.
+ * You can do whatever you want with this file.
*
- * This library is distributed in the hope that it will be useful,
- * but WITHOUT ANY WARRANTY; without even the implied warranty of
- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the GNU
- * Lesser General Public License for more details.
+ * See ../lzma.h for information about liblzma as a whole.
*/
#ifndef LZMA_H_INTERNAL
@@ -148,7 +144,7 @@ typedef enum {
* Decoder would need more memory than allowed by the
* specified memory usage limit. To continue decoding,
* the memory usage limit has to be increased with
- * lzma_memlimit().
+ * lzma_memlimit_set().
*/
LZMA_FORMAT_ERROR = 7,
@@ -185,8 +181,7 @@ typedef enum {
* format would be exceeded. These limits are huge, thus
* getting this error from an encoder is mostly theoretical.
* For example, the maximum compressed and uncompressed
- * size of a .xz Stream created with lzma_stream_encoder is
- * 2^63 - 1 bytes (one byte less than 8 EiB).
+ * size of a .xz Stream is roughly 8 EiB (2^63 bytes).
*
* Decoders return this error if the input data is corrupt.
* This can mean, for example, invalid CRC32 in headers
@@ -212,7 +207,8 @@ typedef enum {
* LZMA_BUF_ERROR. This is intentional.
*
* With zlib, Z_BUF_ERROR may be returned even if the
- * application is doing nothing wrong. The above hack
+ * application is doing nothing wrong, so apps will need
+ * to handle Z_BUF_ERROR specially. The above hack
* guarantees that liblzma never returns LZMA_BUF_ERROR
* to properly written applications unless the input file
* is truncated or corrupt. This should simplify the
@@ -333,7 +329,8 @@ typedef enum {
* to liblzma, and some advanced functions take a pointer to lzma_allocator
* as a separate function argument. The library will use the functions
* specified in lzma_allocator for memory handling instead of the default
- * malloc() and free().
+ * malloc() and free(). C++ users should note that the custom memory
+ * handling functions must not throw exceptions.
*
* liblzma doesn't make an internal copy of lzma_allocator. Thus, it is
* OK to change these function pointers in the middle of the coding
@@ -363,12 +360,12 @@ typedef struct {
* for some reason. When allocation fails, functions
* of liblzma return LZMA_MEM_ERROR.
*
- * For performance reasons, the allocator should not waste time
- * zeroing the allocated buffers. This is not only about speed, but
- * also memory usage, since the operating system kernel doesn't
- * necessarily allocate the requested memory in physical memory until
- * it is actually used. With small input files liblzma may actually
- * need only a fraction of the memory that it requested for allocation.
+ * The allocator should not waste time zeroing the allocated buffers.
+ * This is not only about speed, but also memory usage, since the
+ * operating system kernel doesn't necessarily allocate the requested
+ * memory in physical memory until it is actually used. With small
+ * input files, liblzma may actually need only a fraction of the
+ * memory that it requested for allocation.
*
* \note LZMA_MEM_ERROR is also used when the size of the
* allocation would be greater than SIZE_MAX. Thus,
@@ -418,9 +415,9 @@ typedef struct lzma_internal_s lzma_internal;
* \brief Passing data to and from liblzma
*
* The lzma_stream structure is used for
- * - passing pointers to input and output buffers to liblzma;
- * - defining custom memory hander functions; and
- * - holding a pointer to coder-specific internal data structures.
+ * - passing pointers to input and output buffers to liblzma;
+ * - defining custom memory hander functions; and
+ * - holding a pointer to coder-specific internal data structures.
*
* Typical usage:
*
@@ -463,7 +460,9 @@ typedef struct {
uint64_t total_out; /**< Total number of bytes written by liblzma. */
/**
- * Custom memory allocation functions. Set to NULL to use
+ * \brief Custom memory allocation functions
+ *
+ * In most cases this is NULL which makes liblzma use
* the standard malloc() and free().
*/
lzma_allocator *allocator;
@@ -520,11 +519,10 @@ typedef struct {
* to and get output from liblzma.
*
* See the description of the coder-specific initialization function to find
- * out what `action' values are supported by the coder. See documentation of
- * lzma_ret for the possible return values.
+ * out what `action' values are supported by the coder.
*/
extern LZMA_API(lzma_ret) lzma_code(lzma_stream *strm, lzma_action action)
- lzma_attr_warn_unused_result;
+ lzma_nothrow lzma_attr_warn_unused_result;
/**
@@ -540,7 +538,7 @@ extern LZMA_API(lzma_ret) lzma_code(lzma_stream *strm, lzma_action action)
* stream structure. liblzma doesn't do this, and assumes that
* application knows what it is doing.
*/
-extern LZMA_API(void) lzma_end(lzma_stream *strm);
+extern LZMA_API(void) lzma_end(lzma_stream *strm) lzma_nothrow;
/**
@@ -565,7 +563,8 @@ extern LZMA_API(void) lzma_end(lzma_stream *strm);
* If this function isn't supported by *strm or some other error
* occurs, zero is returned.
*/
-extern LZMA_API(uint64_t) lzma_memusage(const lzma_stream *strm);
+extern LZMA_API(uint64_t) lzma_memusage(const lzma_stream *strm)
+ lzma_nothrow lzma_attr_pure;
/**
@@ -577,7 +576,8 @@ extern LZMA_API(uint64_t) lzma_memusage(const lzma_stream *strm);
* \return On success, the current memory usage limit is returned
* (always non-zero). On error, zero is returned.
*/
-extern LZMA_API(uint64_t) lzma_memlimit_get(const lzma_stream *strm);
+extern LZMA_API(uint64_t) lzma_memlimit_get(const lzma_stream *strm)
+ lzma_nothrow lzma_attr_pure;
/**
@@ -593,4 +593,4 @@ extern LZMA_API(uint64_t) lzma_memlimit_get(const lzma_stream *strm);
* support memory usage limit or memlimit was zero.
*/
extern LZMA_API(lzma_ret) lzma_memlimit_set(
- lzma_stream *strm, uint64_t memlimit);
+ lzma_stream *strm, uint64_t memlimit) lzma_nothrow;
diff --git a/Build/source/utils/xz-4.999.8beta/src/liblzma/api/lzma/bcj.h b/Build/source/utils/xz-4.999.9beta/src/liblzma/api/lzma/bcj.h
index 33bd7da9f92..274bf6c735c 100644
--- a/Build/source/utils/xz-4.999.8beta/src/liblzma/api/lzma/bcj.h
+++ b/Build/source/utils/xz-4.999.9beta/src/liblzma/api/lzma/bcj.h
@@ -1,19 +1,15 @@
/**
* \file lzma/bcj.h
* \brief Branch/Call/Jump conversion filters
+ */
+
+/*
+ * Author: Lasse Collin
*
- * \author Copyright (C) 1999-2006 Igor Pavlov
- * \author Copyright (C) 2007 Lasse Collin
- *
- * This library is free software; you can redistribute it and/or
- * modify it under the terms of the GNU Lesser General Public
- * License as published by the Free Software Foundation; either
- * version 2.1 of the License, or (at your option) any later version.
+ * This file has been put into the public domain.
+ * You can do whatever you want with this file.
*
- * This library is distributed in the hope that it will be useful,
- * but WITHOUT ANY WARRANTY; without even the implied warranty of
- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the GNU
- * Lesser General Public License for more details.
+ * See ../lzma.h for information about liblzma as a whole.
*/
#ifndef LZMA_H_INTERNAL
diff --git a/Build/source/utils/xz-4.999.8beta/src/liblzma/api/lzma/block.h b/Build/source/utils/xz-4.999.9beta/src/liblzma/api/lzma/block.h
index ca154e952b1..10e97446640 100644
--- a/Build/source/utils/xz-4.999.8beta/src/liblzma/api/lzma/block.h
+++ b/Build/source/utils/xz-4.999.9beta/src/liblzma/api/lzma/block.h
@@ -1,19 +1,15 @@
/**
* \file lzma/block.h
* \brief .xz Block handling
+ */
+
+/*
+ * Author: Lasse Collin
*
- * \author Copyright (C) 1999-2006 Igor Pavlov
- * \author Copyright (C) 2007 Lasse Collin
- *
- * This library is free software; you can redistribute it and/or
- * modify it under the terms of the GNU Lesser General Public
- * License as published by the Free Software Foundation; either
- * version 2.1 of the License, or (at your option) any later version.
+ * This file has been put into the public domain.
+ * You can do whatever you want with this file.
*
- * This library is distributed in the hope that it will be useful,
- * but WITHOUT ANY WARRANTY; without even the implied warranty of
- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the GNU
- * Lesser General Public License for more details.
+ * See ../lzma.h for information about liblzma as a whole.
*/
#ifndef LZMA_H_INTERNAL
@@ -164,9 +160,9 @@ typedef struct {
*
* This is handled very similarly to compressed_size above.
*
- * Unlike compressed_size, uncompressed_size is needed by fewer
- * functions. This is because uncompressed_size isn't needed to
- * validate that Block stays within proper limits.
+ * uncompressed_size is needed by fewer functions than
+ * compressed_size. This is because uncompressed_size isn't
+ * needed to validate that Block stays within proper limits.
*
* Read by:
* - lzma_block_header_size()
@@ -211,6 +207,23 @@ typedef struct {
*/
lzma_filter *filters;
+ /**
+ * \brief Raw value stored in the Check field
+ *
+ * After successful coding, the first lzma_check_size(check) bytes
+ * of this array contain the raw value stored in the Check field.
+ *
+ * Note that CRC32 and CRC64 are stored in little endian byte order.
+ * Take it into account if you display the Check values to the user.
+ *
+ * Written by:
+ * - lzma_block_encoder()
+ * - lzma_block_decoder()
+ * - lzma_block_buffer_encode()
+ * - lzma_block_buffer_decode()
+ */
+ uint8_t raw_check[LZMA_CHECK_SIZE_MAX];
+
/*
* Reserved space to allow possible future extensions without
* breaking the ABI. You should not touch these, because the names
@@ -281,14 +294,14 @@ typedef struct {
* a side-effect validates the filter chain.
*/
extern LZMA_API(lzma_ret) lzma_block_header_size(lzma_block *block)
- lzma_attr_warn_unused_result;
+ lzma_nothrow lzma_attr_warn_unused_result;
/**
* \brief Encode Block Header
*
* The caller must have calculated the size of the Block Header already with
- * lzma_block_header_size(). If larger value than the one calculated by
+ * lzma_block_header_size(). If a value larger than the one calculated by
* lzma_block_header_size() is used, the Block Header will be padded to the
* specified size.
*
@@ -304,7 +317,7 @@ extern LZMA_API(lzma_ret) lzma_block_header_size(lzma_block *block)
*/
extern LZMA_API(lzma_ret) lzma_block_header_encode(
const lzma_block *block, uint8_t *out)
- lzma_attr_warn_unused_result;
+ lzma_nothrow lzma_attr_warn_unused_result;
/**
@@ -334,7 +347,7 @@ extern LZMA_API(lzma_ret) lzma_block_header_encode(
*/
extern LZMA_API(lzma_ret) lzma_block_header_decode(lzma_block *block,
lzma_allocator *allocator, const uint8_t *in)
- lzma_attr_warn_unused_result;
+ lzma_nothrow lzma_attr_warn_unused_result;
/**
@@ -366,7 +379,7 @@ extern LZMA_API(lzma_ret) lzma_block_header_decode(lzma_block *block,
*/
extern LZMA_API(lzma_ret) lzma_block_compressed_size(
lzma_block *block, lzma_vli unpadded_size)
- lzma_attr_warn_unused_result;
+ lzma_nothrow lzma_attr_warn_unused_result;
/**
@@ -381,7 +394,7 @@ extern LZMA_API(lzma_ret) lzma_block_compressed_size(
* \return Unpadded Size on success, or zero on error.
*/
extern LZMA_API(lzma_vli) lzma_block_unpadded_size(const lzma_block *block)
- lzma_attr_pure;
+ lzma_nothrow lzma_attr_pure;
/**
@@ -394,7 +407,7 @@ extern LZMA_API(lzma_vli) lzma_block_unpadded_size(const lzma_block *block)
* zero is returned.
*/
extern LZMA_API(lzma_vli) lzma_block_total_size(const lzma_block *block)
- lzma_attr_pure;
+ lzma_nothrow lzma_attr_pure;
/**
@@ -413,7 +426,7 @@ extern LZMA_API(lzma_vli) lzma_block_total_size(const lzma_block *block)
*/
extern LZMA_API(lzma_ret) lzma_block_encoder(
lzma_stream *strm, lzma_block *block)
- lzma_attr_warn_unused_result;
+ lzma_nothrow lzma_attr_warn_unused_result;
/**
@@ -431,16 +444,17 @@ extern LZMA_API(lzma_ret) lzma_block_encoder(
*/
extern LZMA_API(lzma_ret) lzma_block_decoder(
lzma_stream *strm, lzma_block *block)
- lzma_attr_warn_unused_result;
+ lzma_nothrow lzma_attr_warn_unused_result;
/**
- * \brief Calculate maximum output buffer size for single-call encoding
+ * \brief Calculate maximum output size for single-call Block encoding
*
* This is equivalent to lzma_stream_buffer_bound() but for .xz Blocks.
* See the documentation of lzma_stream_buffer_bound().
*/
-extern LZMA_API(size_t) lzma_block_buffer_bound(size_t uncompressed_size);
+extern LZMA_API(size_t) lzma_block_buffer_bound(size_t uncompressed_size)
+ lzma_nothrow;
/**
@@ -461,7 +475,7 @@ extern LZMA_API(size_t) lzma_block_buffer_bound(size_t uncompressed_size);
* still works normally, because it doesn't read the filters array.
*
* \param block Block options: block->version, block->check,
- * and block->filters must be initialized.
+ * and block->filters must have been initialized.
* \param allocator lzma_allocator for custom allocator functions.
* Set to NULL to use malloc() and free().
* \param in Beginning of the input buffer
@@ -483,7 +497,7 @@ extern LZMA_API(lzma_ret) lzma_block_buffer_encode(
lzma_block *block, lzma_allocator *allocator,
const uint8_t *in, size_t in_size,
uint8_t *out, size_t *out_pos, size_t out_size)
- lzma_attr_warn_unused_result;
+ lzma_nothrow lzma_attr_warn_unused_result;
/**
@@ -516,4 +530,5 @@ extern LZMA_API(lzma_ret) lzma_block_buffer_encode(
extern LZMA_API(lzma_ret) lzma_block_buffer_decode(
lzma_block *block, lzma_allocator *allocator,
const uint8_t *in, size_t *in_pos, size_t in_size,
- uint8_t *out, size_t *out_pos, size_t out_size);
+ uint8_t *out, size_t *out_pos, size_t out_size)
+ lzma_nothrow;
diff --git a/Build/source/utils/xz-4.999.8beta/src/liblzma/api/lzma/check.h b/Build/source/utils/xz-4.999.9beta/src/liblzma/api/lzma/check.h
index 4a09d98ed39..5661bbe5d40 100644
--- a/Build/source/utils/xz-4.999.8beta/src/liblzma/api/lzma/check.h
+++ b/Build/source/utils/xz-4.999.9beta/src/liblzma/api/lzma/check.h
@@ -1,19 +1,15 @@
/**
* \file lzma/check.h
* \brief Integrity checks
+ */
+
+/*
+ * Author: Lasse Collin
*
- * \author Copyright (C) 1999-2006 Igor Pavlov
- * \author Copyright (C) 2007 Lasse Collin
- *
- * This library is free software; you can redistribute it and/or
- * modify it under the terms of the GNU Lesser General Public
- * License as published by the Free Software Foundation; either
- * version 2.1 of the License, or (at your option) any later version.
+ * This file has been put into the public domain.
+ * You can do whatever you want with this file.
*
- * This library is distributed in the hope that it will be useful,
- * but WITHOUT ANY WARRANTY; without even the implied warranty of
- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the GNU
- * Lesser General Public License for more details.
+ * See ../lzma.h for information about liblzma as a whole.
*/
#ifndef LZMA_H_INTERNAL
@@ -25,7 +21,7 @@
* \brief Type of the integrity check (Check ID)
*
* The .xz format supports multiple types of checks that are calculated
- * from the uncompressed data. They very in both speed and ability to
+ * from the uncompressed data. They vary in both speed and ability to
* detect errors.
*/
typedef enum {
@@ -75,7 +71,7 @@ typedef enum {
/**
* \brief Test if the given Check ID is supported
*
- * Returns true if the given Check ID is supported by this liblzma build.
+ * Return true if the given Check ID is supported by this liblzma build.
* Otherwise false is returned. It is safe to call this with a value that
* is not in the range [0, 15]; in that case the return value is always false.
*
@@ -83,7 +79,7 @@ typedef enum {
* supported (even if liblzma is built with limited features).
*/
extern LZMA_API(lzma_bool) lzma_check_is_supported(lzma_check check)
- lzma_attr_const;
+ lzma_nothrow lzma_attr_const;
/**
@@ -96,7 +92,8 @@ extern LZMA_API(lzma_bool) lzma_check_is_supported(lzma_check check)
*
* If the argument is not in the range [0, 15], UINT32_MAX is returned.
*/
-extern LZMA_API(uint32_t) lzma_check_size(lzma_check check) lzma_attr_const;
+extern LZMA_API(uint32_t) lzma_check_size(lzma_check check)
+ lzma_nothrow lzma_attr_const;
/**
@@ -108,32 +105,32 @@ extern LZMA_API(uint32_t) lzma_check_size(lzma_check check) lzma_attr_const;
/**
* \brief Calculate CRC32
*
- * Calculates CRC32 using the polynomial from the IEEE 802.3 standard.
+ * Calculate CRC32 using the polynomial from the IEEE 802.3 standard.
*
* \param buf Pointer to the input buffer
* \param size Size of the input buffer
* \param crc Previously returned CRC value. This is used to
* calculate the CRC of a big buffer in smaller chunks.
- * Set to zero when there is no previous value.
+ * Set to zero when starting a new calculation.
*
* \return Updated CRC value, which can be passed to this function
* again to continue CRC calculation.
*/
extern LZMA_API(uint32_t) lzma_crc32(
const uint8_t *buf, size_t size, uint32_t crc)
- lzma_attr_pure;
+ lzma_nothrow lzma_attr_pure;
/**
* \brief Calculate CRC64
*
- * Calculates CRC64 using the polynomial from the ECMA-182 standard.
+ * Calculate CRC64 using the polynomial from the ECMA-182 standard.
*
* This function is used similarly to lzma_crc32(). See its documentation.
*/
extern LZMA_API(uint64_t) lzma_crc64(
const uint8_t *buf, size_t size, uint64_t crc)
- lzma_attr_pure;
+ lzma_nothrow lzma_attr_pure;
/*
@@ -149,4 +146,5 @@ extern LZMA_API(uint64_t) lzma_crc64(
* returned LZMA_NO_CHECK, LZMA_UNSUPPORTED_CHECK, or LZMA_GET_CHECK.
* Calling this function in any other situation has undefined behavior.
*/
-extern LZMA_API(lzma_check) lzma_get_check(const lzma_stream *strm);
+extern LZMA_API(lzma_check) lzma_get_check(const lzma_stream *strm)
+ lzma_nothrow;
diff --git a/Build/source/utils/xz-4.999.8beta/src/liblzma/api/lzma/container.h b/Build/source/utils/xz-4.999.9beta/src/liblzma/api/lzma/container.h
index b7a6128efd9..0d907650fc4 100644
--- a/Build/source/utils/xz-4.999.8beta/src/liblzma/api/lzma/container.h
+++ b/Build/source/utils/xz-4.999.9beta/src/liblzma/api/lzma/container.h
@@ -1,19 +1,15 @@
/**
* \file lzma/container.h
* \brief File formats
+ */
+
+/*
+ * Author: Lasse Collin
*
- * \author Copyright (C) 1999-2008 Igor Pavlov
- * \author Copyright (C) 2007-2008 Lasse Collin
- *
- * This library is free software; you can redistribute it and/or
- * modify it under the terms of the GNU Lesser General Public
- * License as published by the Free Software Foundation; either
- * version 2.1 of the License, or (at your option) any later version.
+ * This file has been put into the public domain.
+ * You can do whatever you want with this file.
*
- * This library is distributed in the hope that it will be useful,
- * but WITHOUT ANY WARRANTY; without even the implied warranty of
- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the GNU
- * Lesser General Public License for more details.
+ * See ../lzma.h for information about liblzma as a whole.
*/
#ifndef LZMA_H_INTERNAL
@@ -59,7 +55,7 @@
*
* This flag doesn't affect the memory usage requirements of the decoder (at
* least not significantly). The memory usage of the encoder may be increased
- * a little but only at the lowest preset levels (0-4 or so).
+ * a little but only at the lowest preset levels (0-2).
*/
#define LZMA_PRESET_EXTREME (UINT32_C(1) << 31)
@@ -72,7 +68,7 @@
* \param preset Compression preset (level and possible flags)
*/
extern LZMA_API(uint64_t) lzma_easy_encoder_memusage(uint32_t preset)
- lzma_attr_pure;
+ lzma_nothrow lzma_attr_pure;
/**
@@ -83,7 +79,7 @@ extern LZMA_API(uint64_t) lzma_easy_encoder_memusage(uint32_t preset)
* \param preset Compression preset (level and possible flags)
*/
extern LZMA_API(uint64_t) lzma_easy_decoder_memusage(uint32_t preset)
- lzma_attr_pure;
+ lzma_nothrow lzma_attr_pure;
/**
@@ -105,8 +101,7 @@ extern LZMA_API(uint64_t) lzma_easy_decoder_memusage(uint32_t preset)
*
* \return - LZMA_OK: Initialization succeeded. Use lzma_code() to
* encode your data.
- * - LZMA_MEM_ERROR: Memory allocation failed. All memory
- * previously allocated for *strm is now freed.
+ * - LZMA_MEM_ERROR: Memory allocation failed.
* - LZMA_OPTIONS_ERROR: The given compression level is not
* supported by this build of liblzma.
* - LZMA_UNSUPPORTED_CHECK: The given check type is not
@@ -114,6 +109,10 @@ extern LZMA_API(uint64_t) lzma_easy_decoder_memusage(uint32_t preset)
* - LZMA_PROG_ERROR: One or more of the parameters have values
* that will never be valid. For example, strm == NULL.
*
+ * If initialization fails (return value is not LZMA_OK), all the memory
+ * allocated for *strm by liblzma is always freed. Thus, there is no need
+ * to call lzma_end() after failed initialization.
+ *
* If initialization succeeds, use lzma_code() to do the actual encoding.
* Valid values for `action' (the second argument of lzma_code()) are
* LZMA_RUN, LZMA_SYNC_FLUSH, LZMA_FULL_FLUSH, and LZMA_FINISH. In future,
@@ -121,7 +120,40 @@ extern LZMA_API(uint64_t) lzma_easy_decoder_memusage(uint32_t preset)
*/
extern LZMA_API(lzma_ret) lzma_easy_encoder(
lzma_stream *strm, uint32_t preset, lzma_check check)
- lzma_attr_warn_unused_result;
+ lzma_nothrow lzma_attr_warn_unused_result;
+
+
+/**
+ * \brief Single-call .xz Stream encoding using a preset number
+ *
+ * The maximum required output buffer size can be calculated with
+ * lzma_stream_buffer_bound().
+ *
+ * \param preset Compression preset to use. See the description
+ * in lzma_easy_encoder().
+ * \param check Type of the integrity check to calculate from
+ * uncompressed data.
+ * \param allocator lzma_allocator for custom allocator functions.
+ * Set to NULL to use malloc() and free().
+ * \param in Beginning of the input buffer
+ * \param in_size Size of the input buffer
+ * \param out Beginning of the output buffer
+ * \param out_pos The next byte will be written to out[*out_pos].
+ * *out_pos is updated only if encoding succeeds.
+ * \param out_size Size of the out buffer; the first byte into
+ * which no data is written to is out[out_size].
+ *
+ * \return - LZMA_OK: Encoding was successful.
+ * - LZMA_BUF_ERROR: Not enough output buffer space.
+ * - LZMA_OPTIONS_ERROR
+ * - LZMA_MEM_ERROR
+ * - LZMA_DATA_ERROR
+ * - LZMA_PROG_ERROR
+ */
+extern LZMA_API(lzma_ret) lzma_easy_buffer_encode(
+ uint32_t preset, lzma_check check,
+ lzma_allocator *allocator, const uint8_t *in, size_t in_size,
+ uint8_t *out, size_t *out_pos, size_t out_size) lzma_nothrow;
/**
@@ -141,7 +173,7 @@ extern LZMA_API(lzma_ret) lzma_easy_encoder(
*/
extern LZMA_API(lzma_ret) lzma_stream_encoder(lzma_stream *strm,
const lzma_filter *filters, lzma_check check)
- lzma_attr_warn_unused_result;
+ lzma_nothrow lzma_attr_warn_unused_result;
/**
@@ -166,7 +198,7 @@ extern LZMA_API(lzma_ret) lzma_stream_encoder(lzma_stream *strm,
*/
extern LZMA_API(lzma_ret) lzma_alone_encoder(
lzma_stream *strm, const lzma_options_lzma *options)
- lzma_attr_warn_unused_result;
+ lzma_nothrow lzma_attr_warn_unused_result;
/**
@@ -191,11 +223,12 @@ extern LZMA_API(lzma_ret) lzma_alone_encoder(
* uncompressible data. Currently there is no function to
* calculate the maximum expansion of multi-call encoding.
*/
-extern LZMA_API(size_t) lzma_stream_buffer_bound(size_t uncompressed_size);
+extern LZMA_API(size_t) lzma_stream_buffer_bound(size_t uncompressed_size)
+ lzma_nothrow;
/**
- * \brief Single-call Stream encoder
+ * \brief Single-call .xz Stream encoder
*
* \param filters Array of filters. This must be terminated with
* filters[n].id = LZMA_VLI_UNKNOWN. See filter.h
@@ -223,7 +256,7 @@ extern LZMA_API(lzma_ret) lzma_stream_buffer_encode(
lzma_filter *filters, lzma_check check,
lzma_allocator *allocator, const uint8_t *in, size_t in_size,
uint8_t *out, size_t *out_pos, size_t out_size)
- lzma_attr_warn_unused_result;
+ lzma_nothrow lzma_attr_warn_unused_result;
/************
@@ -288,7 +321,7 @@ extern LZMA_API(lzma_ret) lzma_stream_buffer_encode(
*/
extern LZMA_API(lzma_ret) lzma_stream_decoder(
lzma_stream *strm, uint64_t memlimit, uint32_t flags)
- lzma_attr_warn_unused_result;
+ lzma_nothrow lzma_attr_warn_unused_result;
/**
@@ -308,7 +341,7 @@ extern LZMA_API(lzma_ret) lzma_stream_decoder(
*/
extern LZMA_API(lzma_ret) lzma_auto_decoder(
lzma_stream *strm, uint64_t memlimit, uint32_t flags)
- lzma_attr_warn_unused_result;
+ lzma_nothrow lzma_attr_warn_unused_result;
/**
@@ -323,7 +356,7 @@ extern LZMA_API(lzma_ret) lzma_auto_decoder(
*/
extern LZMA_API(lzma_ret) lzma_alone_decoder(
lzma_stream *strm, uint64_t memlimit)
- lzma_attr_warn_unused_result;
+ lzma_nothrow lzma_attr_warn_unused_result;
/**
@@ -368,4 +401,4 @@ extern LZMA_API(lzma_ret) lzma_stream_buffer_decode(
uint64_t *memlimit, uint32_t flags, lzma_allocator *allocator,
const uint8_t *in, size_t *in_pos, size_t in_size,
uint8_t *out, size_t *out_pos, size_t out_size)
- lzma_attr_warn_unused_result;
+ lzma_nothrow lzma_attr_warn_unused_result;
diff --git a/Build/source/utils/xz-4.999.8beta/src/liblzma/api/lzma/delta.h b/Build/source/utils/xz-4.999.9beta/src/liblzma/api/lzma/delta.h
index 963c7c0f5e6..592fc4f8496 100644
--- a/Build/source/utils/xz-4.999.8beta/src/liblzma/api/lzma/delta.h
+++ b/Build/source/utils/xz-4.999.9beta/src/liblzma/api/lzma/delta.h
@@ -1,19 +1,15 @@
/**
* \file lzma/delta.h
* \brief Delta filter
+ */
+
+/*
+ * Author: Lasse Collin
*
- * \author Copyright (C) 1999-2006 Igor Pavlov
- * \author Copyright (C) 2007 Lasse Collin
- *
- * This library is free software; you can redistribute it and/or
- * modify it under the terms of the GNU Lesser General Public
- * License as published by the Free Software Foundation; either
- * version 2.1 of the License, or (at your option) any later version.
+ * This file has been put into the public domain.
+ * You can do whatever you want with this file.
*
- * This library is distributed in the hope that it will be useful,
- * but WITHOUT ANY WARRANTY; without even the implied warranty of
- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the GNU
- * Lesser General Public License for more details.
+ * See ../lzma.h for information about liblzma as a whole.
*/
#ifndef LZMA_H_INTERNAL
diff --git a/Build/source/utils/xz-4.999.8beta/src/liblzma/api/lzma/filter.h b/Build/source/utils/xz-4.999.9beta/src/liblzma/api/lzma/filter.h
index 534c374088b..8d0db96bcc1 100644
--- a/Build/source/utils/xz-4.999.8beta/src/liblzma/api/lzma/filter.h
+++ b/Build/source/utils/xz-4.999.9beta/src/liblzma/api/lzma/filter.h
@@ -1,19 +1,15 @@
/**
* \file lzma/filter.h
* \brief Common filter related types
+ */
+
+/*
+ * Author: Lasse Collin
*
- * \author Copyright (C) 1999-2006 Igor Pavlov
- * \author Copyright (C) 2007 Lasse Collin
- *
- * This library is free software; you can redistribute it and/or
- * modify it under the terms of the GNU Lesser General Public
- * License as published by the Free Software Foundation; either
- * version 2.1 of the License, or (at your option) any later version.
+ * This file has been put into the public domain.
+ * You can do whatever you want with this file.
*
- * This library is distributed in the hope that it will be useful,
- * but WITHOUT ANY WARRANTY; without even the implied warranty of
- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the GNU
- * Lesser General Public License for more details.
+ * See ../lzma.h for information about liblzma as a whole.
*/
#ifndef LZMA_H_INTERNAL
@@ -33,16 +29,16 @@
/**
* \brief Filter options
*
- * This structure is used to pass Filter ID and a pointer filter's options
- * to liblzma. An array of lzma_filter structures is used to define a filter
- * chain.
+ * This structure is used to pass Filter ID and a pointer filter's
+ * options to liblzma. A few functions work with a single lzma_filter
+ * structure, while most functions expect a filter chain.
*
* A filter chain is indicated with an array of lzma_filter structures.
- * The array is terminated with .id = LZMA_VLI_UNKNOWN. Thus, the filter array
- * must have LZMA_FILTERS_MAX + 1 elements (that is, five) to be able to hold
- * any arbitrary filter chain. This is important when using
- * lzma_block_header_decode() from block.h, because too small array would
- * make liblzma write past the end of the filters array.
+ * The array is terminated with .id = LZMA_VLI_UNKNOWN. Thus, the filter
+ * array must have LZMA_FILTERS_MAX + 1 elements (that is, five) to
+ * be able to hold any arbitrary filter chain. This is important when
+ * using lzma_block_header_decode() from block.h, because too small
+ * array would make liblzma write past the end of the filters array.
*/
typedef struct {
/**
@@ -51,6 +47,9 @@ typedef struct {
* Use constants whose name begin with `LZMA_FILTER_' to specify
* different filters. In an array of lzma_filter structures, use
* LZMA_VLI_UNKNOWN to indicate end of filters.
+ *
+ * \note This is not an enum, because on some systems enums
+ * cannot be 64-bit.
*/
lzma_vli id;
@@ -74,49 +73,57 @@ typedef struct {
/**
* \brief Test if the given Filter ID is supported for encoding
*
- * Returns true if the give Filter ID is supported for encoding by this
+ * Return true if the give Filter ID is supported for encoding by this
* liblzma build. Otherwise false is returned.
*
* There is no way to list which filters are available in this particular
* liblzma version and build. It would be useless, because the application
* couldn't know what kind of options the filter would need.
*/
-extern LZMA_API(lzma_bool) lzma_filter_encoder_is_supported(lzma_vli id);
+extern LZMA_API(lzma_bool) lzma_filter_encoder_is_supported(lzma_vli id)
+ lzma_nothrow lzma_attr_const;
/**
* \brief Test if the given Filter ID is supported for decoding
*
- * Returns true if the give Filter ID is supported for decoding by this
+ * Return true if the give Filter ID is supported for decoding by this
* liblzma build. Otherwise false is returned.
*/
-extern LZMA_API(lzma_bool) lzma_filter_decoder_is_supported(lzma_vli id);
+extern LZMA_API(lzma_bool) lzma_filter_decoder_is_supported(lzma_vli id)
+ lzma_nothrow lzma_attr_const;
/**
* \brief Calculate rough memory requirements for raw encoder
*
+ * Because the calculation is rough, this function can be used to calculate
+ * the memory requirements for Block and Stream encoders too.
+ *
* \param filters Array of filters terminated with
* .id == LZMA_VLI_UNKNOWN.
*
- * \return Rough number of bytes required for the given filter chain
- * when encoding.
+ * \return Rough number of bytes of memory required for the given
+ * filter chain when encoding.
*/
extern LZMA_API(uint64_t) lzma_raw_encoder_memusage(const lzma_filter *filters)
- lzma_attr_pure;
+ lzma_nothrow lzma_attr_pure;
/**
* \brief Calculate rough memory requirements for raw decoder
*
+ * Because the calculation is rough, this function can be used to calculate
+ * the memory requirements for Block and Stream decoders too.
+ *
* \param filters Array of filters terminated with
* .id == LZMA_VLI_UNKNOWN.
*
- * \return Rough number of bytes required for the given filter chain
- * when decoding.
+ * \return Rough number of bytes of memory required for the given
+ * filter chain when decoding.
*/
extern LZMA_API(uint64_t) lzma_raw_decoder_memusage(const lzma_filter *filters)
- lzma_attr_pure;
+ lzma_nothrow lzma_attr_pure;
/**
@@ -125,10 +132,8 @@ extern LZMA_API(uint64_t) lzma_raw_decoder_memusage(const lzma_filter *filters)
* This function may be useful when implementing custom file formats.
*
* \param strm Pointer to properly prepared lzma_stream
- * \param filters Array of lzma_filter structures.
- * The end of the array must be marked with
- * .id = LZMA_VLI_UNKNOWN. The minimum
- * number of filters is one and the maximum is four.
+ * \param filters Array of lzma_filter structures. The end of the
+ * array must be marked with .id = LZMA_VLI_UNKNOWN.
*
* The `action' with lzma_code() can be LZMA_RUN, LZMA_SYNC_FLUSH (if the
* filter chain supports it), or LZMA_FINISH.
@@ -140,7 +145,7 @@ extern LZMA_API(uint64_t) lzma_raw_decoder_memusage(const lzma_filter *filters)
*/
extern LZMA_API(lzma_ret) lzma_raw_encoder(
lzma_stream *strm, const lzma_filter *filters)
- lzma_attr_warn_unused_result;
+ lzma_nothrow lzma_attr_warn_unused_result;
/**
@@ -158,12 +163,14 @@ extern LZMA_API(lzma_ret) lzma_raw_encoder(
*/
extern LZMA_API(lzma_ret) lzma_raw_decoder(
lzma_stream *strm, const lzma_filter *filters)
- lzma_attr_warn_unused_result;
+ lzma_nothrow lzma_attr_warn_unused_result;
/**
* \brief Single-call raw encoder
*
+ * \param filters Array of lzma_filter structures. The end of the
+ * array must be marked with .id = LZMA_VLI_UNKNOWN.
* \param allocator lzma_allocator for custom allocator functions.
* Set to NULL to use malloc() and free().
* \param in Beginning of the input buffer
@@ -180,16 +187,22 @@ extern LZMA_API(lzma_ret) lzma_raw_decoder(
* - LZMA_MEM_ERROR
* - LZMA_DATA_ERROR
* - LZMA_PROG_ERROR
+ *
+ * \note There is no function to calculate how big output buffer
+ * would surely be big enough. (lzma_stream_buffer_bound()
+ * works only for lzma_stream_buffer_encode().)
*/
extern LZMA_API(lzma_ret) lzma_raw_buffer_encode(
const lzma_filter *filters, lzma_allocator *allocator,
const uint8_t *in, size_t in_size, uint8_t *out,
- size_t *out_pos, size_t out_size);
+ size_t *out_pos, size_t out_size) lzma_nothrow;
/**
* \brief Single-call raw decoder
*
+ * \param filters Array of lzma_filter structures. The end of the
+ * array must be marked with .id = LZMA_VLI_UNKNOWN.
* \param allocator lzma_allocator for custom allocator functions.
* Set to NULL to use malloc() and free().
* \param in Beginning of the input buffer
@@ -206,7 +219,7 @@ extern LZMA_API(lzma_ret) lzma_raw_buffer_encode(
extern LZMA_API(lzma_ret) lzma_raw_buffer_decode(
const lzma_filter *filters, lzma_allocator *allocator,
const uint8_t *in, size_t *in_pos, size_t in_size,
- uint8_t *out, size_t *out_pos, size_t out_size);
+ uint8_t *out, size_t *out_pos, size_t out_size) lzma_nothrow;
/**
@@ -229,7 +242,7 @@ extern LZMA_API(lzma_ret) lzma_raw_buffer_decode(
* lzma_properties_encode() returns LZMA_OPTIONS_ERROR.
*/
extern LZMA_API(lzma_ret) lzma_properties_size(
- uint32_t *size, const lzma_filter *filter);
+ uint32_t *size, const lzma_filter *filter) lzma_nothrow;
/**
@@ -254,7 +267,7 @@ extern LZMA_API(lzma_ret) lzma_properties_size(
* of the Filter Properties field is zero.
*/
extern LZMA_API(lzma_ret) lzma_properties_encode(
- const lzma_filter *filter, uint8_t *props);
+ const lzma_filter *filter, uint8_t *props) lzma_nothrow;
/**
@@ -280,7 +293,7 @@ extern LZMA_API(lzma_ret) lzma_properties_encode(
*/
extern LZMA_API(lzma_ret) lzma_properties_decode(
lzma_filter *filter, lzma_allocator *allocator,
- const uint8_t *props, size_t props_size);
+ const uint8_t *props, size_t props_size) lzma_nothrow;
/**
@@ -304,7 +317,7 @@ extern LZMA_API(lzma_ret) lzma_properties_decode(
*/
extern LZMA_API(lzma_ret) lzma_filter_flags_size(
uint32_t *size, const lzma_filter *filters)
- lzma_attr_warn_unused_result;
+ lzma_nothrow lzma_attr_warn_unused_result;
/**
@@ -327,7 +340,7 @@ extern LZMA_API(lzma_ret) lzma_filter_flags_size(
*/
extern LZMA_API(lzma_ret) lzma_filter_flags_encode(const lzma_filter *filters,
uint8_t *out, size_t *out_pos, size_t out_size)
- lzma_attr_warn_unused_result;
+ lzma_nothrow lzma_attr_warn_unused_result;
/**
@@ -344,4 +357,4 @@ extern LZMA_API(lzma_ret) lzma_filter_flags_encode(const lzma_filter *filters,
extern LZMA_API(lzma_ret) lzma_filter_flags_decode(
lzma_filter *filters, lzma_allocator *allocator,
const uint8_t *in, size_t *in_pos, size_t in_size)
- lzma_attr_warn_unused_result;
+ lzma_nothrow lzma_attr_warn_unused_result;
diff --git a/Build/source/utils/xz-4.999.8beta/src/liblzma/api/lzma/index.h b/Build/source/utils/xz-4.999.9beta/src/liblzma/api/lzma/index.h
index eb9aa87dad4..da9a622aa80 100644
--- a/Build/source/utils/xz-4.999.8beta/src/liblzma/api/lzma/index.h
+++ b/Build/source/utils/xz-4.999.9beta/src/liblzma/api/lzma/index.h
@@ -1,19 +1,15 @@
/**
* \file lzma/index.h
* \brief Handling of .xz Index lists
+ */
+
+/*
+ * Author: Lasse Collin
*
- * \author Copyright (C) 1999-2006 Igor Pavlov
- * \author Copyright (C) 2007 Lasse Collin
- *
- * This library is free software; you can redistribute it and/or
- * modify it under the terms of the GNU Lesser General Public
- * License as published by the Free Software Foundation; either
- * version 2.1 of the License, or (at your option) any later version.
+ * This file has been put into the public domain.
+ * You can do whatever you want with this file.
*
- * This library is distributed in the hope that it will be useful,
- * but WITHOUT ANY WARRANTY; without even the implied warranty of
- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the GNU
- * Lesser General Public License for more details.
+ * See ../lzma.h for information about liblzma as a whole.
*/
#ifndef LZMA_H_INTERNAL
@@ -54,14 +50,24 @@ typedef struct {
lzma_vli uncompressed_size;
/**
- * Offset of the first byte of a Block relative to the beginning
- * of the Stream, or if there are multiple Indexes combined,
- * relative to the beginning of the first Stream.
+ * \brief Compressed offset in the Stream(s)
+ *
+ * This is the offset of the first byte of the Block, that is,
+ * where you need to seek to decode the Block. The offset
+ * is relative to the beginning of the Stream, or if there are
+ * multiple Indexes combined, relative to the beginning of the
+ * first Stream.
*/
lzma_vli stream_offset;
/**
- * Uncompressed offset
+ * \brief Uncompressed offset
+ *
+ * When doing random-access reading, it is possible that the target
+ * offset is not exactly at Block boundary. One will need to compare
+ * the target offset against uncompressed_offset, and possibly decode
+ * and throw away some amount of data before reaching the target
+ * offset.
*/
lzma_vli uncompressed_offset;
@@ -84,7 +90,8 @@ typedef struct {
* If you want to know how much memory an existing lzma_index structure is
* using, use lzma_index_memusage(lzma_index_count(i)).
*/
-extern LZMA_API(uint64_t) lzma_index_memusage(lzma_vli record_count);
+extern LZMA_API(uint64_t) lzma_index_memusage(lzma_vli record_count)
+ lzma_nothrow;
/**
@@ -98,8 +105,7 @@ extern LZMA_API(uint64_t) lzma_index_memusage(lzma_vli record_count);
* the i that was given as an argument.
*/
extern LZMA_API(lzma_index *) lzma_index_init(
- lzma_index *i, lzma_allocator *allocator)
- lzma_attr_warn_unused_result;
+ lzma_index *i, lzma_allocator *allocator) lzma_nothrow;
/**
@@ -107,7 +113,8 @@ extern LZMA_API(lzma_index *) lzma_index_init(
*
* If i is NULL, this does nothing.
*/
-extern LZMA_API(void) lzma_index_end(lzma_index *i, lzma_allocator *allocator);
+extern LZMA_API(void) lzma_index_end(lzma_index *i, lzma_allocator *allocator)
+ lzma_nothrow;
/**
@@ -134,13 +141,14 @@ extern LZMA_API(void) lzma_index_end(lzma_index *i, lzma_allocator *allocator);
extern LZMA_API(lzma_ret) lzma_index_append(
lzma_index *i, lzma_allocator *allocator,
lzma_vli unpadded_size, lzma_vli uncompressed_size)
- lzma_attr_warn_unused_result;
+ lzma_nothrow lzma_attr_warn_unused_result;
/**
* \brief Get the number of Records
*/
-extern LZMA_API(lzma_vli) lzma_index_count(const lzma_index *i) lzma_attr_pure;
+extern LZMA_API(lzma_vli) lzma_index_count(const lzma_index *i)
+ lzma_nothrow lzma_attr_pure;
/**
@@ -148,7 +156,8 @@ extern LZMA_API(lzma_vli) lzma_index_count(const lzma_index *i) lzma_attr_pure;
*
* This is needed to verify the Backward Size field in the Stream Footer.
*/
-extern LZMA_API(lzma_vli) lzma_index_size(const lzma_index *i) lzma_attr_pure;
+extern LZMA_API(lzma_vli) lzma_index_size(const lzma_index *i)
+ lzma_nothrow lzma_attr_pure;
/**
@@ -158,7 +167,7 @@ extern LZMA_API(lzma_vli) lzma_index_size(const lzma_index *i) lzma_attr_pure;
* or Index fields.
*/
extern LZMA_API(lzma_vli) lzma_index_total_size(const lzma_index *i)
- lzma_attr_pure;
+ lzma_nothrow lzma_attr_pure;
/**
@@ -168,7 +177,7 @@ extern LZMA_API(lzma_vli) lzma_index_total_size(const lzma_index *i)
* were in a single Stream.
*/
extern LZMA_API(lzma_vli) lzma_index_stream_size(const lzma_index *i)
- lzma_attr_pure;
+ lzma_nothrow lzma_attr_pure;
/**
@@ -180,14 +189,14 @@ extern LZMA_API(lzma_vli) lzma_index_stream_size(const lzma_index *i)
* possible Stream Padding fields.
*/
extern LZMA_API(lzma_vli) lzma_index_file_size(const lzma_index *i)
- lzma_attr_pure;
+ lzma_nothrow lzma_attr_pure;
/**
* \brief Get the uncompressed size of the Stream
*/
extern LZMA_API(lzma_vli) lzma_index_uncompressed_size(const lzma_index *i)
- lzma_attr_pure;
+ lzma_nothrow lzma_attr_pure;
/**
@@ -195,7 +204,7 @@ extern LZMA_API(lzma_vli) lzma_index_uncompressed_size(const lzma_index *i)
*/
extern LZMA_API(lzma_bool) lzma_index_read(
lzma_index *i, lzma_index_record *record)
- lzma_attr_warn_unused_result;
+ lzma_nothrow lzma_attr_warn_unused_result;
/**
@@ -204,7 +213,7 @@ extern LZMA_API(lzma_bool) lzma_index_read(
* Rewind the Index so that next call to lzma_index_read() will return the
* first Record.
*/
-extern LZMA_API(void) lzma_index_rewind(lzma_index *i);
+extern LZMA_API(void) lzma_index_rewind(lzma_index *i) lzma_nothrow;
/**
@@ -231,25 +240,27 @@ extern LZMA_API(void) lzma_index_rewind(lzma_index *i);
*/
extern LZMA_API(lzma_bool) lzma_index_locate(
lzma_index *i, lzma_index_record *record, lzma_vli target)
- lzma_attr_warn_unused_result;
+ lzma_nothrow;
/**
* \brief Concatenate Indexes of two Streams
*
- *
+ * Concatenating Indexes is useful when doing random-access reading in
+ * multi-Stream .xz file, or when combining multiple Streams into single
+ * Stream.
*
* \param dest Destination Index after which src is appended
- * \param src Source Index. The memory allocated for this is
- * either moved to be part of *dest or freed if and
- * only if the function call succeeds, and src will
- * be an invalid pointer.
+ * \param src Source Index. If this function succeeds, the
+ * memory allocated for src is freed or moved to
+ * be part of dest.
* \param allocator Custom memory allocator; can be NULL to use
* malloc() and free().
* \param padding Size of the Stream Padding field between Streams.
* This must be a multiple of four.
*
- * \return - LZMA_OK: Indexes concatenated successfully.
+ * \return - LZMA_OK: Indexes concatenated successfully. src is now
+ * a dangling pointer.
* - LZMA_DATA_ERROR: *dest would grow too big.
* - LZMA_MEM_ERROR
* - LZMA_PROG_ERROR
@@ -257,7 +268,7 @@ extern LZMA_API(lzma_bool) lzma_index_locate(
extern LZMA_API(lzma_ret) lzma_index_cat(lzma_index *lzma_restrict dest,
lzma_index *lzma_restrict src,
lzma_allocator *allocator, lzma_vli padding)
- lzma_attr_warn_unused_result;
+ lzma_nothrow lzma_attr_warn_unused_result;
/**
@@ -269,21 +280,23 @@ extern LZMA_API(lzma_ret) lzma_index_cat(lzma_index *lzma_restrict dest,
*/
extern LZMA_API(lzma_index *) lzma_index_dup(
const lzma_index *i, lzma_allocator *allocator)
- lzma_attr_warn_unused_result;
+ lzma_nothrow lzma_attr_warn_unused_result;
/**
* \brief Compare if two Index lists are identical
*
+ * Read positions are not compared.
+ *
* \return True if *a and *b are equal, false otherwise.
*/
extern LZMA_API(lzma_bool) lzma_index_equal(
const lzma_index *a, const lzma_index *b)
- lzma_attr_pure;
+ lzma_nothrow lzma_attr_pure;
/**
- * \brief Initialize Index encoder
+ * \brief Initialize .xz Index encoder
*
* \param strm Pointer to properly prepared lzma_stream
* \param i Pointer to lzma_index which should be encoded.
@@ -297,11 +310,11 @@ extern LZMA_API(lzma_bool) lzma_index_equal(
* - LZMA_PROG_ERROR
*/
extern LZMA_API(lzma_ret) lzma_index_encoder(lzma_stream *strm, lzma_index *i)
- lzma_attr_warn_unused_result;
+ lzma_nothrow lzma_attr_warn_unused_result;
/**
- * \brief Initialize Index decoder
+ * \brief Initialize .xz Index decoder
*
* \param strm Pointer to properly prepared lzma_stream
* \param i Pointer to a pointer that will be made to point
@@ -323,16 +336,17 @@ extern LZMA_API(lzma_ret) lzma_index_encoder(lzma_stream *strm, lzma_index *i)
* \note The memory usage limit is checked early in the decoding
* (within the first dozen input bytes or so). The actual memory
* is allocated later in smaller pieces. If the memory usage
- * limit is modified after decoding a part of the Index already,
- * the new limit may be ignored.
+ * limit is modified with lzma_memlimit_set() after a part
+ * of the Index has already been decoded, the new limit may
+ * get ignored.
*/
extern LZMA_API(lzma_ret) lzma_index_decoder(
lzma_stream *strm, lzma_index **i, uint64_t memlimit)
- lzma_attr_warn_unused_result;
+ lzma_nothrow lzma_attr_warn_unused_result;
/**
- * \brief Single-call Index encoder
+ * \brief Single-call .xz Index encoder
*
* \param i Index to be encoded. The read position will be at
* the end of the Index if encoding succeeds, or at
@@ -353,11 +367,11 @@ extern LZMA_API(lzma_ret) lzma_index_decoder(
* the internal data is allocated on stack.
*/
extern LZMA_API(lzma_ret) lzma_index_buffer_encode(lzma_index *i,
- uint8_t *out, size_t *out_pos, size_t out_size);
+ uint8_t *out, size_t *out_pos, size_t out_size) lzma_nothrow;
/**
- * \brief Single-call Index decoder
+ * \brief Single-call .xz Index decoder
*
* \param i Pointer to a pointer that will be made to point
* to the final decoded Index if decoding is
@@ -383,6 +397,7 @@ extern LZMA_API(lzma_ret) lzma_index_buffer_encode(lzma_index *i,
* - LZMA_DATA_ERROR
* - LZMA_PROG_ERROR
*/
-extern LZMA_API(lzma_ret) lzma_index_buffer_decode(
- lzma_index **i, uint64_t *memlimit, lzma_allocator *allocator,
- const uint8_t *in, size_t *in_pos, size_t in_size);
+extern LZMA_API(lzma_ret) lzma_index_buffer_decode(lzma_index **i,
+ uint64_t *memlimit, lzma_allocator *allocator,
+ const uint8_t *in, size_t *in_pos, size_t in_size)
+ lzma_nothrow;
diff --git a/Build/source/utils/xz-4.999.8beta/src/liblzma/api/lzma/index_hash.h b/Build/source/utils/xz-4.999.9beta/src/liblzma/api/lzma/index_hash.h
index 22e89d34334..94726e7beea 100644
--- a/Build/source/utils/xz-4.999.8beta/src/liblzma/api/lzma/index_hash.h
+++ b/Build/source/utils/xz-4.999.9beta/src/liblzma/api/lzma/index_hash.h
@@ -2,22 +2,17 @@
* \file lzma/index_hash.h
* \brief Validates Index by using a hash function
*
- * Instead of constructing complete Index while decoding Blocks, Index hash
- * calculates a hash of the Block sizes and Index, and then compares the
- * hashes. This way memory usage is constant even with large number of
- * Blocks and huge Index.
- *
- * \author Copyright (C) 2008 Lasse Collin
+ * Hashing makes it possible to use constant amount of memory to validate
+ * Index of arbitrary size.
+ */
+
+/*
+ * Author: Lasse Collin
*
- * This library is free software; you can redistribute it and/or
- * modify it under the terms of the GNU Lesser General Public
- * License as published by the Free Software Foundation; either
- * version 2.1 of the License, or (at your option) any later version.
+ * This file has been put into the public domain.
+ * You can do whatever you want with this file.
*
- * This library is distributed in the hope that it will be useful,
- * but WITHOUT ANY WARRANTY; without even the implied warranty of
- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the GNU
- * Lesser General Public License for more details.
+ * See ../lzma.h for information about liblzma as a whole.
*/
#ifndef LZMA_H_INTERNAL
@@ -43,14 +38,15 @@ typedef struct lzma_index_hash_s lzma_index_hash;
*/
extern LZMA_API(lzma_index_hash *) lzma_index_hash_init(
lzma_index_hash *index_hash, lzma_allocator *allocator)
- lzma_attr_warn_unused_result;
+ lzma_nothrow lzma_attr_warn_unused_result;
/**
* \brief Deallocate lzma_index_hash structure
*/
extern LZMA_API(void) lzma_index_hash_end(
- lzma_index_hash *index_hash, lzma_allocator *allocator);
+ lzma_index_hash *index_hash, lzma_allocator *allocator)
+ lzma_nothrow;
/**
@@ -68,7 +64,7 @@ extern LZMA_API(void) lzma_index_hash_end(
*/
extern LZMA_API(lzma_ret) lzma_index_hash_append(lzma_index_hash *index_hash,
lzma_vli unpadded_size, lzma_vli uncompressed_size)
- lzma_attr_warn_unused_result;
+ lzma_nothrow lzma_attr_warn_unused_result;
/**
@@ -98,7 +94,7 @@ extern LZMA_API(lzma_ret) lzma_index_hash_append(lzma_index_hash *index_hash,
*/
extern LZMA_API(lzma_ret) lzma_index_hash_decode(lzma_index_hash *index_hash,
const uint8_t *in, size_t *in_pos, size_t in_size)
- lzma_attr_warn_unused_result;
+ lzma_nothrow lzma_attr_warn_unused_result;
/**
@@ -108,4 +104,4 @@ extern LZMA_API(lzma_ret) lzma_index_hash_decode(lzma_index_hash *index_hash,
*/
extern LZMA_API(lzma_vli) lzma_index_hash_size(
const lzma_index_hash *index_hash)
- lzma_attr_pure;
+ lzma_nothrow lzma_attr_pure;
diff --git a/Build/source/utils/xz-4.999.8beta/src/liblzma/api/lzma/lzma.h b/Build/source/utils/xz-4.999.9beta/src/liblzma/api/lzma/lzma.h
index e0ba45bfa0b..28ebbb14b90 100644
--- a/Build/source/utils/xz-4.999.8beta/src/liblzma/api/lzma/lzma.h
+++ b/Build/source/utils/xz-4.999.9beta/src/liblzma/api/lzma/lzma.h
@@ -1,19 +1,15 @@
/**
* \file lzma/lzma.h
* \brief LZMA1 and LZMA2 filters
+ */
+
+/*
+ * Author: Lasse Collin
*
- * \author Copyright (C) 1999-2006 Igor Pavlov
- * \author Copyright (C) 2007 Lasse Collin
- *
- * This library is free software; you can redistribute it and/or
- * modify it under the terms of the GNU Lesser General Public
- * License as published by the Free Software Foundation; either
- * version 2.1 of the License, or (at your option) any later version.
+ * This file has been put into the public domain.
+ * You can do whatever you want with this file.
*
- * This library is distributed in the hope that it will be useful,
- * but WITHOUT ANY WARRANTY; without even the implied warranty of
- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the GNU
- * Lesser General Public License for more details.
+ * See ../lzma.h for information about liblzma as a whole.
*/
#ifndef LZMA_H_INTERNAL
@@ -24,9 +20,12 @@
/**
* \brief LZMA1 Filter ID
*
- * LZMA1 is the very same thing as what was called just LZMA in earlier
- * LZMA Utils, 7-Zip, and LZMA SDK. It's called LZMA1 here to prevent
- * developers from accidentally using LZMA when they actually want LZMA2.
+ * LZMA1 is the very same thing as what was called just LZMA in LZMA Utils,
+ * 7-Zip, and LZMA SDK. It's called LZMA1 here to prevent developers from
+ * accidentally using LZMA when they actually want LZMA2.
+ *
+ * LZMA1 shouldn't be used for new applications unless you _really_ know
+ * what you are doing. LZMA2 is almost always a better choice.
*/
#define LZMA_FILTER_LZMA1 LZMA_VLI_C(0x4000000000000001)
@@ -34,9 +33,9 @@
* \brief LZMA2 Filter ID
*
* Usually you want this instead of LZMA1. Compared to LZMA1, LZMA2 adds
- * support for LZMA_SYNC_FLUSH, uncompressed chunks (expands uncompressible
- * data less), possibility to change lc/lp/pb in the middle of encoding, and
- * some other internal improvements.
+ * support for LZMA_SYNC_FLUSH, uncompressed chunks (smaller expansion
+ * when trying to compress uncompressible data), possibility to change
+ * lc/lp/pb in the middle of encoding, and some other internal improvements.
*/
#define LZMA_FILTER_LZMA2 LZMA_VLI_C(0x21)
@@ -107,7 +106,7 @@ typedef enum {
/**
* \brief Test if given match finder is supported
*
- * Returns true if the given match finder is supported by this liblzma build.
+ * Return true if the given match finder is supported by this liblzma build.
* Otherwise false is returned. It is safe to call this with a value that
* isn't listed in lzma_match_finder enumeration; the return value will be
* false.
@@ -119,11 +118,11 @@ typedef enum {
* match finders don't need.
*/
extern LZMA_API(lzma_bool) lzma_mf_is_supported(lzma_match_finder match_finder)
- lzma_attr_const;
+ lzma_nothrow lzma_attr_const;
/**
- * \brief LZMA compression modes
+ * \brief Compression modes
*
* This selects the function used to analyze the data produced by the match
* finder.
@@ -143,7 +142,7 @@ typedef enum {
*
* This is usually notably slower than fast mode. Use this
* together with binary tree match finders to expose the
- * full potential of the LZMA encoder.
+ * full potential of the LZMA1 or LZMA2 encoder.
*/
} lzma_mode;
@@ -151,7 +150,7 @@ typedef enum {
/**
* \brief Test if given compression mode is supported
*
- * Returns true if the given compression mode is supported by this liblzma
+ * Return true if the given compression mode is supported by this liblzma
* build. Otherwise false is returned. It is safe to call this with a value
* that isn't listed in lzma_mode enumeration; the return value will be false.
*
@@ -161,7 +160,7 @@ typedef enum {
* additional options to the encoder that the older modes don't need.
*/
extern LZMA_API(lzma_bool) lzma_mode_is_supported(lzma_mode mode)
- lzma_attr_const;
+ lzma_nothrow lzma_attr_const;
/**
@@ -182,7 +181,8 @@ typedef struct {
* uncompressed data is kept in memory. One method to reduce size of
* the uncompressed data is to store distance-length pairs, which
* indicate what data to repeat from the dictionary buffer. Thus,
- * the bigger the dictionary, the better compression ratio usually is.
+ * the bigger the dictionary, the better the compression ratio
+ * usually is.
*
* Maximum size of the dictionary depends on multiple things:
* - Memory usage limit
@@ -191,9 +191,9 @@ typedef struct {
*
* Currently the maximum dictionary size for encoding is 1.5 GiB
* (i.e. (UINT32_C(1) << 30) + (UINT32_C(1) << 29)) even on 64-bit
- * systems for certain match finder implementation reasons. In future,
- * there may be match finders that support bigger dictionaries (3 GiB
- * will probably be the maximum).
+ * systems for certain match finder implementation reasons. In the
+ * future, there may be match finders that support bigger
+ * dictionaries.
*
* Decoder already supports dictionaries up to 4 GiB - 1 B (i.e.
* UINT32_MAX), so increasing the maximum dictionary size of the
@@ -213,26 +213,20 @@ typedef struct {
* \brief Pointer to an initial dictionary
*
* It is possible to initialize the LZ77 history window using
- * a preset dictionary. Here is a good quote from zlib's
- * documentation; this applies to LZMA as is:
- *
- * "The dictionary should consist of strings (byte sequences) that
- * are likely to be encountered later in the data to be compressed,
- * with the most commonly used strings preferably put towards the
- * end of the dictionary. Using a dictionary is most useful when
- * the data to be compressed is short and can be predicted with
- * good accuracy; the data can then be compressed better than
- * with the default empty dictionary."
- * (From deflateSetDictionary() in zlib.h of zlib version 1.2.3)
+ * a preset dictionary. It is useful when compressing many
+ * similar, relatively small chunks of data independently from
+ * each other. The preset dictionary should contain typical
+ * strings that occur in the files being compressed. The most
+ * probable strings should be near the end of the preset dictionary.
*
- * This feature should be used only in special situations.
- * It works correctly only with raw encoding and decoding.
+ * This feature should be used only in special situations. For
+ * now, it works correctly only with raw encoding and decoding.
* Currently none of the container formats supported by
* liblzma allow preset dictionary when decoding, thus if
- * you create a .lzma file with preset dictionary, it cannot
- * be decoded with the regular .lzma decoder functions.
- *
- * \todo This feature is not implemented yet.
+ * you create a .xz or .lzma file with preset dictionary, it
+ * cannot be decoded with the regular decoder functions. In the
+ * future, the .xz format will likely get support for preset
+ * dictionary though.
*/
const uint8_t *preset_dict;
@@ -240,9 +234,13 @@ typedef struct {
* \brief Size of the preset dictionary
*
* Specifies the size of the preset dictionary. If the size is
- * bigger than dict_size, only the last dict_size bytes are processed.
+ * bigger than dict_size, only the last dict_size bytes are
+ * processed.
*
* This variable is read only when preset_dict is not NULL.
+ * If preset_dict is not NULL but preset_dict_size is zero,
+ * no preset dictionary is used (identical to only setting
+ * preset_dict to NULL).
*/
uint32_t preset_dict_size;
@@ -261,9 +259,9 @@ typedef struct {
* results in some cases like email servers doing virus scanning.
* This limit also simplifies the internal implementation in liblzma.
*
- * There may be LZMA streams that have lc + lp > 4 (maximum lc
- * possible would be 8). It is not possible to decode such streams
- * with liblzma.
+ * There may be LZMA1 streams that have lc + lp > 4 (maximum possible
+ * lc would be 8). It is not possible to decode such streams with
+ * liblzma.
*/
uint32_t lc;
# define LZMA_LCLP_MIN 0
@@ -313,7 +311,7 @@ typedef struct {
*/
lzma_bool persistent;
- /** LZMA compression mode */
+ /** Compression mode */
lzma_mode mode;
/**
@@ -327,11 +325,12 @@ typedef struct {
* encoded; it's not truncated to nice_len.)
*
* Bigger values usually increase the compression ratio and
- * compression time. For most files, 30 to 100 is a good value,
+ * compression time. For most files, 32 to 128 is a good value,
* which gives very good compression ratio at good speed.
*
- * The exact minimum value depends on the match finder. The maximum is
- * 273, which is the maximum length of a match that LZMA can encode.
+ * The exact minimum value depends on the match finder. The maximum
+ * is 273, which is the maximum length of a match that LZMA1 and
+ * LZMA2 can encode.
*/
uint32_t nice_len;
@@ -408,4 +407,4 @@ typedef struct {
* when building liblzma.
*/
extern LZMA_API(lzma_bool) lzma_lzma_preset(
- lzma_options_lzma *options, uint32_t preset);
+ lzma_options_lzma *options, uint32_t preset) lzma_nothrow;
diff --git a/Build/source/utils/xz-4.999.8beta/src/liblzma/api/lzma/stream_flags.h b/Build/source/utils/xz-4.999.9beta/src/liblzma/api/lzma/stream_flags.h
index 52f88eacf17..d255bdda15f 100644
--- a/Build/source/utils/xz-4.999.8beta/src/liblzma/api/lzma/stream_flags.h
+++ b/Build/source/utils/xz-4.999.9beta/src/liblzma/api/lzma/stream_flags.h
@@ -1,19 +1,15 @@
/**
* \file lzma/stream_flags.h
* \brief .xz Stream Header and Stream Footer encoder and decoder
+ */
+
+/*
+ * Author: Lasse Collin
*
- * \author Copyright (C) 1999-2006 Igor Pavlov
- * \author Copyright (C) 2007 Lasse Collin
- *
- * This library is free software; you can redistribute it and/or
- * modify it under the terms of the GNU Lesser General Public
- * License as published by the Free Software Foundation; either
- * version 2.1 of the License, or (at your option) any later version.
+ * This file has been put into the public domain.
+ * You can do whatever you want with this file.
*
- * This library is distributed in the hope that it will be useful,
- * but WITHOUT ANY WARRANTY; without even the implied warranty of
- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the GNU
- * Lesser General Public License for more details.
+ * See ../lzma.h for information about liblzma as a whole.
*/
#ifndef LZMA_H_INTERNAL
@@ -32,7 +28,7 @@
/**
- * Options for encoding and decoding Stream Header and Stream Footer
+ * \brief Options for encoding/decoding Stream Header and Stream Footer
*/
typedef struct {
/**
@@ -129,7 +125,7 @@ typedef struct {
*/
extern LZMA_API(lzma_ret) lzma_stream_header_encode(
const lzma_stream_flags *options, uint8_t *out)
- lzma_attr_warn_unused_result;
+ lzma_nothrow lzma_attr_warn_unused_result;
/**
@@ -146,7 +142,7 @@ extern LZMA_API(lzma_ret) lzma_stream_header_encode(
*/
extern LZMA_API(lzma_ret) lzma_stream_footer_encode(
const lzma_stream_flags *options, uint8_t *out)
- lzma_attr_warn_unused_result;
+ lzma_nothrow lzma_attr_warn_unused_result;
/**
@@ -181,7 +177,7 @@ extern LZMA_API(lzma_ret) lzma_stream_footer_encode(
*/
extern LZMA_API(lzma_ret) lzma_stream_header_decode(
lzma_stream_flags *options, const uint8_t *in)
- lzma_attr_warn_unused_result;
+ lzma_nothrow lzma_attr_warn_unused_result;
/**
@@ -208,7 +204,7 @@ extern LZMA_API(lzma_ret) lzma_stream_header_decode(
*/
extern LZMA_API(lzma_ret) lzma_stream_footer_decode(
lzma_stream_flags *options, const uint8_t *in)
- lzma_attr_warn_unused_result;
+ lzma_nothrow lzma_attr_warn_unused_result;
/**
@@ -228,4 +224,4 @@ extern LZMA_API(lzma_ret) lzma_stream_footer_decode(
*/
extern LZMA_API(lzma_ret) lzma_stream_flags_compare(
const lzma_stream_flags *a, const lzma_stream_flags *b)
- lzma_attr_pure;
+ lzma_nothrow lzma_attr_pure;
diff --git a/Build/source/utils/xz-4.999.8beta/src/liblzma/api/lzma/subblock.h b/Build/source/utils/xz-4.999.9beta/src/liblzma/api/lzma/subblock.h
index b9a3025b500..4ffb049824b 100644
--- a/Build/source/utils/xz-4.999.8beta/src/liblzma/api/lzma/subblock.h
+++ b/Build/source/utils/xz-4.999.9beta/src/liblzma/api/lzma/subblock.h
@@ -1,19 +1,15 @@
/**
* \file lzma/subblock.h
* \brief Subblock filter
+ */
+
+/*
+ * Author: Lasse Collin
*
- * \author Copyright (C) 1999-2006 Igor Pavlov
- * \author Copyright (C) 2007 Lasse Collin
- *
- * This library is free software; you can redistribute it and/or
- * modify it under the terms of the GNU Lesser General Public
- * License as published by the Free Software Foundation; either
- * version 2.1 of the License, or (at your option) any later version.
+ * This file has been put into the public domain.
+ * You can do whatever you want with this file.
*
- * This library is distributed in the hope that it will be useful,
- * but WITHOUT ANY WARRANTY; without even the implied warranty of
- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the GNU
- * Lesser General Public License for more details.
+ * See ../lzma.h for information about liblzma as a whole.
*/
#ifndef LZMA_H_INTERNAL
diff --git a/Build/source/utils/xz-4.999.9beta/src/liblzma/api/lzma/version.h b/Build/source/utils/xz-4.999.9beta/src/liblzma/api/lzma/version.h
new file mode 100644
index 00000000000..36b7952dce8
--- /dev/null
+++ b/Build/source/utils/xz-4.999.9beta/src/liblzma/api/lzma/version.h
@@ -0,0 +1,121 @@
+/**
+ * \file lzma/version.h
+ * \brief Version number
+ */
+
+/*
+ * Author: Lasse Collin
+ *
+ * This file has been put into the public domain.
+ * You can do whatever you want with this file.
+ *
+ * See ../lzma.h for information about liblzma as a whole.
+ */
+
+#ifndef LZMA_H_INTERNAL
+# error Never include this file directly. Use <lzma.h> instead.
+#endif
+
+
+/*
+ * Version number splitted in components
+ */
+#define LZMA_VERSION_MAJOR 4
+#define LZMA_VERSION_MINOR 999
+#define LZMA_VERSION_PATCH 9
+#define LZMA_VERSION_STABILITY LZMA_VERSION_STABILITY_BETA
+
+#ifndef LZMA_VERSION_COMMIT
+# define LZMA_VERSION_COMMIT ""
+#endif
+
+
+/*
+ * Map symbolic stability levels to integers.
+ */
+#define LZMA_VERSION_STABILITY_ALPHA 0
+#define LZMA_VERSION_STABILITY_BETA 1
+#define LZMA_VERSION_STABILITY_STABLE 2
+
+
+/**
+ * \brief Compile-time version number
+ *
+ * The version number is of format xyyyzzzs where
+ * - x = major
+ * - yyy = minor
+ * - zzz = revision
+ * - s indicates stability: 0 = alpha, 1 = beta, 2 = stable
+ *
+ * The same xyyyzzz triplet is never reused with different stability levels.
+ * For example, if 5.1.0alpha has been released, there will never be 5.1.0beta
+ * or 5.1.0 stable.
+ *
+ * \note The version number of liblzma has nothing to with
+ * the version number of Igor Pavlov's LZMA SDK.
+ */
+#define LZMA_VERSION (LZMA_VERSION_MAJOR * UINT32_C(10000000) \
+ + LZMA_VERSION_MINOR * UINT32_C(10000) \
+ + LZMA_VERSION_PATCH * UINT32_C(10) \
+ + LZMA_VERSION_STABILITY)
+
+
+/*
+ * Macros to construct the compile-time version string
+ */
+#if LZMA_VERSION_STABILITY == LZMA_VERSION_STABILITY_ALPHA
+# define LZMA_VERSION_STABILITY_STRING "alpha"
+#elif LZMA_VERSION_STABILITY == LZMA_VERSION_STABILITY_BETA
+# define LZMA_VERSION_STABILITY_STRING "beta"
+#elif LZMA_VERSION_STABILITY == LZMA_VERSION_STABILITY_STABLE
+# define LZMA_VERSION_STABILITY_STRING ""
+#else
+# error Incorrect LZMA_VERSION_STABILITY
+#endif
+
+#define LZMA_VERSION_STRING_C_(major, minor, patch, stability, commit) \
+ #major "." #minor "." #patch stability commit
+
+#define LZMA_VERSION_STRING_C(major, minor, patch, stability, commit) \
+ LZMA_VERSION_STRING_C_(major, minor, patch, stability, commit)
+
+
+/**
+ * \brief Compile-time version as a string
+ *
+ * This can be for example "4.999.5alpha", "4.999.8beta", or "5.0.0" (stable
+ * versions don't have any "stable" suffix). In future, a snapshot built
+ * from source code repository may include an additional suffix, for example
+ * "4.999.8beta-21-g1d92". The commit ID won't be available in numeric form
+ * in LZMA_VERSION macro.
+ */
+#define LZMA_VERSION_STRING LZMA_VERSION_STRING_C( \
+ LZMA_VERSION_MAJOR, LZMA_VERSION_MINOR, \
+ LZMA_VERSION_PATCH, LZMA_VERSION_STABILITY_STRING, \
+ LZMA_VERSION_COMMIT)
+
+
+/* #ifndef is needed for use with windres (MinGW or Cygwin). */
+#ifndef LZMA_H_INTERNAL_RC
+
+/**
+ * \brief Run-time version number as an integer
+ *
+ * Return the value of LZMA_VERSION macro at the compile time of liblzma.
+ * This allows the application to compare if it was built against the same,
+ * older, or newer version of liblzma that is currently running.
+ */
+extern LZMA_API(uint32_t) lzma_version_number(void)
+ lzma_nothrow lzma_attr_const;
+
+
+/**
+ * \brief Run-time version as a string
+ *
+ * This function may be useful if you want to display which version of
+ * liblzma your application is currently using.
+ */
+extern LZMA_API(const char *) lzma_version_string(void)
+ lzma_nothrow lzma_attr_const;
+
+#endif
diff --git a/Build/source/utils/xz-4.999.8beta/src/liblzma/api/lzma/vli.h b/Build/source/utils/xz-4.999.9beta/src/liblzma/api/lzma/vli.h
index 6ab1d183abd..f002c775165 100644
--- a/Build/source/utils/xz-4.999.8beta/src/liblzma/api/lzma/vli.h
+++ b/Build/source/utils/xz-4.999.9beta/src/liblzma/api/lzma/vli.h
@@ -2,18 +2,25 @@
* \file lzma/vli.h
* \brief Variable-length integer handling
*
- * \author Copyright (C) 1999-2006 Igor Pavlov
- * \author Copyright (C) 2007 Lasse Collin
- *
- * This library is free software; you can redistribute it and/or
- * modify it under the terms of the GNU Lesser General Public
- * License as published by the Free Software Foundation; either
- * version 2.1 of the License, or (at your option) any later version.
- *
- * This library is distributed in the hope that it will be useful,
- * but WITHOUT ANY WARRANTY; without even the implied warranty of
- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the GNU
- * Lesser General Public License for more details.
+ * In the .xz format, most integers are encoded in a variable-length
+ * representation, which is sometimes called little endian base-128 encoding.
+ * This saves space when smaller values are more likely than bigger values.
+ *
+ * The encoding scheme encodes seven bits to every byte, using minimum
+ * number of bytes required to represent the given value. Encodings that use
+ * non-minimum number of bytes are invalid, thus every integer has exactly
+ * one encoded representation. The maximum number of bits in a VLI is 63,
+ * thus the vli argument must be at maximum of UINT64_MAX / 2. You should
+ * use LZMA_VLI_MAX for clarity.
+ */
+
+/*
+ * Author: Lasse Collin
+ *
+ * This file has been put into the public domain.
+ * You can do whatever you want with this file.
+ *
+ * See ../lzma.h for information about liblzma as a whole.
*/
#ifndef LZMA_H_INTERNAL
@@ -71,18 +78,7 @@ typedef uint64_t lzma_vli;
/**
- * \brief Encodes variable-length integer
- *
- * In the .xz format, most integers are encoded in a variable-length
- * representation, which is sometimes called little endian base-128 encoding.
- * This saves space when smaller values are more likely than bigger values.
- *
- * The encoding scheme encodes seven bits to every byte, using minimum
- * number of bytes required to represent the given value. Encodings that use
- * non-minimum number of bytes are invalid, thus every integer has exactly
- * one encoded representation. The maximum number of bits in a VLI is 63,
- * thus the vli argument must be at maximum of UINT64_MAX / 2. You should
- * use LZMA_VLI_MAX for clarity.
+ * \brief Encode a variable-length integer
*
* This function has two modes: single-call and multi-call. Single-call mode
* encodes the whole integer at once; it is an error if the output buffer is
@@ -119,11 +115,11 @@ typedef uint64_t lzma_vli;
*/
extern LZMA_API(lzma_ret) lzma_vli_encode(lzma_vli vli,
size_t *lzma_restrict vli_pos, uint8_t *lzma_restrict out,
- size_t *lzma_restrict out_pos, size_t out_size);
+ size_t *lzma_restrict out_pos, size_t out_size) lzma_nothrow;
/**
- * \brief Decodes variable-length integer
+ * \brief Decode a variable-length integer
*
* Like lzma_vli_encode(), this function has single-call and multi-call modes.
*
@@ -159,7 +155,7 @@ extern LZMA_API(lzma_ret) lzma_vli_encode(lzma_vli vli,
*/
extern LZMA_API(lzma_ret) lzma_vli_decode(lzma_vli *lzma_restrict vli,
size_t *lzma_restrict vli_pos, const uint8_t *lzma_restrict in,
- size_t *lzma_restrict in_pos, size_t in_size);
+ size_t *lzma_restrict in_pos, size_t in_size) lzma_nothrow;
/**
@@ -168,4 +164,5 @@ extern LZMA_API(lzma_ret) lzma_vli_decode(lzma_vli *lzma_restrict vli,
* \return Number of bytes on success (1-9). If vli isn't valid,
* zero is returned.
*/
-extern LZMA_API(uint32_t) lzma_vli_size(lzma_vli vli) lzma_attr_pure;
+extern LZMA_API(uint32_t) lzma_vli_size(lzma_vli vli)
+ lzma_nothrow lzma_attr_pure;
diff --git a/Build/source/utils/xz-4.999.9beta/src/liblzma/check/Makefile.inc b/Build/source/utils/xz-4.999.9beta/src/liblzma/check/Makefile.inc
new file mode 100644
index 00000000000..e4067a9cbcb
--- /dev/null
+++ b/Build/source/utils/xz-4.999.9beta/src/liblzma/check/Makefile.inc
@@ -0,0 +1,51 @@
+##
+## Author: Lasse Collin
+##
+## This file has been put into the public domain.
+## You can do whatever you want with this file.
+##
+
+EXTRA_DIST += \
+ check/crc32_tablegen.c \
+ check/crc64_tablegen.c
+
+liblzma_la_SOURCES += \
+ check/check.c \
+ check/check.h \
+ check/crc_macros.h
+
+if COND_CHECK_CRC32
+if COND_SMALL
+liblzma_la_SOURCES += check/crc32_small.c
+else
+liblzma_la_SOURCES += \
+ check/crc32_table.c \
+ check/crc32_table_le.h \
+ check/crc32_table_be.h
+if COND_ASM_X86
+liblzma_la_SOURCES += check/crc32_x86.S
+else
+liblzma_la_SOURCES += check/crc32_fast.c
+endif
+endif
+endif
+
+if COND_CHECK_CRC64
+if COND_SMALL
+liblzma_la_SOURCES += check/crc64_small.c
+else
+liblzma_la_SOURCES += \
+ check/crc64_table.c \
+ check/crc64_table_le.h \
+ check/crc64_table_be.h
+if COND_ASM_X86
+liblzma_la_SOURCES += check/crc64_x86.S
+else
+liblzma_la_SOURCES += check/crc64_fast.c
+endif
+endif
+endif
+
+if COND_CHECK_SHA256
+liblzma_la_SOURCES += check/sha256.c
+endif
diff --git a/Build/source/utils/xz-4.999.8beta/src/liblzma/check/check.c b/Build/source/utils/xz-4.999.9beta/src/liblzma/check/check.c
index 484be594559..ba8622e6376 100644
--- a/Build/source/utils/xz-4.999.8beta/src/liblzma/check/check.c
+++ b/Build/source/utils/xz-4.999.9beta/src/liblzma/check/check.c
@@ -3,11 +3,10 @@
/// \file check.c
/// \brief Single API to access different integrity checks
//
-// This code has been put into the public domain.
+// Author: Lasse Collin
//
-// This library is distributed in the hope that it will be useful,
-// but WITHOUT ANY WARRANTY; without even the implied warranty of
-// MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.
+// This file has been put into the public domain.
+// You can do whatever you want with this file.
//
///////////////////////////////////////////////////////////////////////////////
diff --git a/Build/source/utils/xz-4.999.8beta/src/liblzma/check/check.h b/Build/source/utils/xz-4.999.9beta/src/liblzma/check/check.h
index 73c6391d487..e100d2b8530 100644
--- a/Build/source/utils/xz-4.999.8beta/src/liblzma/check/check.h
+++ b/Build/source/utils/xz-4.999.9beta/src/liblzma/check/check.h
@@ -3,11 +3,10 @@
/// \file check.h
/// \brief Internal API to different integrity check functions
//
-// This code has been put into the public domain.
+// Author: Lasse Collin
//
-// This library is distributed in the hope that it will be useful,
-// but WITHOUT ANY WARRANTY; without even the implied warranty of
-// MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.
+// This file has been put into the public domain.
+// You can do whatever you want with this file.
//
///////////////////////////////////////////////////////////////////////////////
@@ -61,6 +60,7 @@ typedef struct {
/// the array two-dimensional.
#ifdef HAVE_SMALL
extern uint32_t lzma_crc32_table[1][256];
+extern void lzma_crc32_init(void);
#else
extern const uint32_t lzma_crc32_table[8][256];
extern const uint64_t lzma_crc64_table[4][256];
diff --git a/Build/source/utils/xz-4.999.8beta/src/liblzma/check/crc32_fast.c b/Build/source/utils/xz-4.999.9beta/src/liblzma/check/crc32_fast.c
index 61eacd61af5..a308eff5829 100644
--- a/Build/source/utils/xz-4.999.8beta/src/liblzma/check/crc32_fast.c
+++ b/Build/source/utils/xz-4.999.9beta/src/liblzma/check/crc32_fast.c
@@ -2,12 +2,17 @@
//
/// \file crc32.c
/// \brief CRC32 calculation
+///
+/// Calculate the CRC32 using the slice-by-eight algorithm.
+/// It is explained in this document:
+/// http://www.intel.com/technology/comms/perfnet/download/CRC_generators.pdf
+/// The code in this file is not the same as in Intel's paper, but
+/// the basic principle is identical.
//
-// This code has been put into the public domain.
+// Author: Lasse Collin
//
-// This library is distributed in the hope that it will be useful,
-// but WITHOUT ANY WARRANTY; without even the implied warranty of
-// MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.
+// This file has been put into the public domain.
+// You can do whatever you want with this file.
//
///////////////////////////////////////////////////////////////////////////////
@@ -43,17 +48,6 @@ lzma_crc32(const uint8_t *buf, size_t size, uint32_t crc)
size &= (size_t)(7);
// Calculate the CRC32 using the slice-by-eight algorithm.
- // It is explained in this document:
- // http://www.intel.com/technology/comms/perfnet/download/CRC_generators.pdf
- //
- // The code below is different than the code in Intel's
- // paper, but the principle is identical. This should be
- // faster with GCC than Intel's code. This is tested only
- // with GCC 3.4.6 and 4.1.2 on x86, so your results may vary.
- //
- // Using -Os and -fomit-frame-pointer seem to give the best
- // results at least with GCC 4.1.2 on x86. It's sill far
- // from the speed of hand-optimized assembler.
while (buf < limit) {
crc ^= *(uint32_t *)(buf);
buf += 4;
@@ -66,9 +60,9 @@ lzma_crc32(const uint8_t *buf, size_t size, uint32_t crc)
const uint32_t tmp = *(uint32_t *)(buf);
buf += 4;
- // It is critical for performance, that
- // the crc variable is XORed between the
- // two table-lookup pairs.
+ // At least with some compilers, it is critical for
+ // performance, that the crc variable is XORed
+ // between the two table-lookup pairs.
crc = lzma_crc32_table[3][A(tmp)]
^ lzma_crc32_table[2][B(tmp)]
^ crc
diff --git a/Build/source/utils/xz-4.999.8beta/src/liblzma/check/crc32_small.c b/Build/source/utils/xz-4.999.9beta/src/liblzma/check/crc32_small.c
index b10bbd379dc..5f8a3286878 100644
--- a/Build/source/utils/xz-4.999.8beta/src/liblzma/check/crc32_small.c
+++ b/Build/source/utils/xz-4.999.9beta/src/liblzma/check/crc32_small.c
@@ -3,11 +3,10 @@
/// \file crc32_small.c
/// \brief CRC32 calculation (size-optimized)
//
-// This code has been put into the public domain.
+// Author: Lasse Collin
//
-// This library is distributed in the hope that it will be useful,
-// but WITHOUT ANY WARRANTY; without even the implied warranty of
-// MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.
+// This file has been put into the public domain.
+// You can do whatever you want with this file.
//
///////////////////////////////////////////////////////////////////////////////
@@ -38,10 +37,18 @@ crc32_init(void)
}
+extern void
+lzma_crc32_init(void)
+{
+ mythread_once(crc32_init);
+ return;
+}
+
+
extern LZMA_API(uint32_t)
lzma_crc32(const uint8_t *buf, size_t size, uint32_t crc)
{
- mythread_once(crc32_init);
+ lzma_crc32_init();
crc = ~crc;
diff --git a/Build/source/utils/xz-4.999.8beta/src/liblzma/check/crc32_table.c b/Build/source/utils/xz-4.999.9beta/src/liblzma/check/crc32_table.c
index 4fcebc2bc09..368874eb79d 100644
--- a/Build/source/utils/xz-4.999.8beta/src/liblzma/check/crc32_table.c
+++ b/Build/source/utils/xz-4.999.9beta/src/liblzma/check/crc32_table.c
@@ -3,11 +3,10 @@
/// \file crc32_table.c
/// \brief Precalculated CRC32 table with correct endianness
//
-// This code has been put into the public domain.
+// Author: Lasse Collin
//
-// This library is distributed in the hope that it will be useful,
-// but WITHOUT ANY WARRANTY; without even the implied warranty of
-// MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.
+// This file has been put into the public domain.
+// You can do whatever you want with this file.
//
///////////////////////////////////////////////////////////////////////////////
diff --git a/Build/source/utils/xz-4.999.8beta/src/liblzma/check/crc32_table_be.h b/Build/source/utils/xz-4.999.9beta/src/liblzma/check/crc32_table_be.h
index c483cb670dc..c483cb670dc 100644
--- a/Build/source/utils/xz-4.999.8beta/src/liblzma/check/crc32_table_be.h
+++ b/Build/source/utils/xz-4.999.9beta/src/liblzma/check/crc32_table_be.h
diff --git a/Build/source/utils/xz-4.999.8beta/src/liblzma/check/crc32_table_le.h b/Build/source/utils/xz-4.999.9beta/src/liblzma/check/crc32_table_le.h
index 25f4fc44353..25f4fc44353 100644
--- a/Build/source/utils/xz-4.999.8beta/src/liblzma/check/crc32_table_le.h
+++ b/Build/source/utils/xz-4.999.9beta/src/liblzma/check/crc32_table_le.h
diff --git a/Build/source/utils/xz-4.999.8beta/src/liblzma/check/crc32_tablegen.c b/Build/source/utils/xz-4.999.9beta/src/liblzma/check/crc32_tablegen.c
index fbcbf474334..0cbfecd89dd 100644
--- a/Build/source/utils/xz-4.999.8beta/src/liblzma/check/crc32_tablegen.c
+++ b/Build/source/utils/xz-4.999.9beta/src/liblzma/check/crc32_tablegen.c
@@ -6,11 +6,10 @@
/// Compiling: gcc -std=c99 -o crc32_tablegen crc32_tablegen.c
/// Add -DWORDS_BIGENDIAN to generate big endian table.
//
-// This code has been put into the public domain.
+// Author: Lasse Collin
//
-// This library is distributed in the hope that it will be useful,
-// but WITHOUT ANY WARRANTY; without even the implied warranty of
-// MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.
+// This file has been put into the public domain.
+// You can do whatever you want with this file.
//
///////////////////////////////////////////////////////////////////////////////
diff --git a/Build/source/utils/xz-4.999.8beta/src/liblzma/check/crc32_x86.S b/Build/source/utils/xz-4.999.9beta/src/liblzma/check/crc32_x86.S
index 859311acb3e..cca29891f82 100644
--- a/Build/source/utils/xz-4.999.8beta/src/liblzma/check/crc32_x86.S
+++ b/Build/source/utils/xz-4.999.9beta/src/liblzma/check/crc32_x86.S
@@ -1,11 +1,18 @@
/*
* Speed-optimized CRC32 using slicing-by-eight algorithm
- * Instruction set: i386
- * Optimized for: i686
*
- * This code has been put into the public domain by its authors:
- * Original code by Igor Pavlov <http://7-zip.org/>
- * Position-independent version by Lasse Collin <lasse.collin@tukaani.org>
+ * This uses only i386 instructions, but it is optimized for i686 and later
+ * (including e.g. Pentium II/III/IV, Athlon XP, and Core 2). For i586
+ * (e.g. Pentium), slicing-by-four would be better, and even the C version
+ * of slicing-by-eight built with gcc -march=i586 tends to be a little bit
+ * better than this. Very few probably run this code on i586 or older x86
+ * so this shouldn't be a problem in practice.
+ *
+ * Authors: Igor Pavlov (original version)
+ * Lasse Collin (AT&T syntax, PIC support, better portability)
+ *
+ * This file has been put into the public domain.
+ * You can do whatever you want with this file.
*
* This code needs lzma_crc32_table, which can be created using the
* following C code:
@@ -15,10 +22,10 @@ uint32_t lzma_crc32_table[8][256];
void
init_table(void)
{
- // IEEE-802.3 (CRC32)
+ // IEEE-802.3
static const uint32_t poly32 = UINT32_C(0xEDB88320);
- // Castagnoli (CRC32C)
+ // Castagnoli
// static const uint32_t poly32 = UINT32_C(0x82F63B78);
// Koopman
@@ -60,7 +67,7 @@ init_table(void)
* Solaris assembler doesn't have .p2align, and Darwin uses .align
* differently than GNU/Linux and Solaris.
*/
-#ifdef __MACH__
+#if defined(__MACH__) || defined(__MSDOS__)
# define ALIGN(pow2, abs) .align pow2
#else
# define ALIGN(pow2, abs) .align abs
@@ -69,7 +76,8 @@ init_table(void)
.text
.globl LZMA_CRC32
-#if !defined(__MACH__) && !defined(_WIN32)
+#if !defined(__MACH__) && !defined(_WIN32) && !defined(__CYGWIN__) \
+ && !defined(__MSDOS__)
.type LZMA_CRC32, @function
#endif
@@ -101,8 +109,14 @@ LZMA_CRC32:
* by GCC but only on some systems. Testing for both makes it simpler
* to test this code without libtool, and keeps the code working also
* when built with libtool but using something else than GCC.
+ *
+ * I understood that libtool may define PIC on Windows even though
+ * the code in Windows DLLs is not PIC in sense that it is in ELF
+ * binaries, so we need a separate check to always use the non-PIC
+ * code on Windows.
*/
-#if !defined(PIC) && !defined(__PIC__)
+#if (!defined(PIC) && !defined(__PIC__)) \
+ || (defined(_WIN32) || defined(__CYGWIN__))
/* Not PIC */
movl $LZMA_CRC32_TABLE, %ebx
#elif defined(__MACH__)
@@ -262,17 +276,21 @@ LZMA_CRC32:
#endif
#if defined(__MACH__) && (defined(PIC) || defined(__PIC__))
+ /* Mach-O PIC */
.section __IMPORT,__pointers,non_lazy_symbol_pointers
.L_lzma_crc32_table$non_lazy_ptr:
.indirect_symbol LZMA_CRC32_TABLE
.long 0
-#elif defined(_WIN32)
+#elif defined(_WIN32) || defined(__CYGWIN__)
+# ifdef DLL_EXPORT
/* This is equivalent of __declspec(dllexport). */
.section .drectve
.ascii " -export:lzma_crc32"
+# endif
-#else
+#elif !defined(__MSDOS__)
+ /* ELF */
.size LZMA_CRC32, .-LZMA_CRC32
#endif
diff --git a/Build/source/utils/xz-4.999.8beta/src/liblzma/check/crc64_fast.c b/Build/source/utils/xz-4.999.9beta/src/liblzma/check/crc64_fast.c
index d2d1d60f9f4..25557264b8a 100644
--- a/Build/source/utils/xz-4.999.8beta/src/liblzma/check/crc64_fast.c
+++ b/Build/source/utils/xz-4.999.9beta/src/liblzma/check/crc64_fast.c
@@ -2,12 +2,15 @@
//
/// \file crc64.c
/// \brief CRC64 calculation
+///
+/// Calculate the CRC64 using the slice-by-four algorithm. This is the same
+/// idea that is used in crc32_fast.c, but for CRC64 we use only four tables
+/// instead of eight to avoid increasing CPU cache usage.
//
-// This code has been put into the public domain.
+// Author: Lasse Collin
//
-// This library is distributed in the hope that it will be useful,
-// but WITHOUT ANY WARRANTY; without even the implied warranty of
-// MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.
+// This file has been put into the public domain.
+// You can do whatever you want with this file.
//
///////////////////////////////////////////////////////////////////////////////
@@ -22,7 +25,7 @@
#endif
-// See comments in crc32.c.
+// See the comments in crc32_fast.c. They aren't duplicated here.
extern LZMA_API(uint64_t)
lzma_crc64(const uint8_t *buf, size_t size, uint64_t crc)
{
@@ -41,10 +44,6 @@ lzma_crc64(const uint8_t *buf, size_t size, uint64_t crc)
const uint8_t *const limit = buf + (size & ~(size_t)(3));
size &= (size_t)(3);
- // Calculate the CRC64 using the slice-by-four algorithm.
- //
- // In contrast to CRC32 code, this one seems to be fastest
- // with -O3 -fomit-frame-pointer.
while (buf < limit) {
#ifdef WORDS_BIGENDIAN
const uint32_t tmp = (crc >> 32) ^ *(uint32_t *)(buf);
@@ -53,9 +52,6 @@ lzma_crc64(const uint8_t *buf, size_t size, uint64_t crc)
#endif
buf += 4;
- // It is critical for performance, that
- // the crc variable is XORed between the
- // two table-lookup pairs.
crc = lzma_crc64_table[3][A(tmp)]
^ lzma_crc64_table[2][B(tmp)]
^ S32(crc)
diff --git a/Build/source/utils/xz-4.999.8beta/src/liblzma/check/crc64_small.c b/Build/source/utils/xz-4.999.9beta/src/liblzma/check/crc64_small.c
index 26b049977e0..55d72316bce 100644
--- a/Build/source/utils/xz-4.999.8beta/src/liblzma/check/crc64_small.c
+++ b/Build/source/utils/xz-4.999.9beta/src/liblzma/check/crc64_small.c
@@ -3,11 +3,10 @@
/// \file crc64_small.c
/// \brief CRC64 calculation (size-optimized)
//
-// This code has been put into the public domain.
+// Author: Lasse Collin
//
-// This library is distributed in the hope that it will be useful,
-// but WITHOUT ANY WARRANTY; without even the implied warranty of
-// MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.
+// This file has been put into the public domain.
+// You can do whatever you want with this file.
//
///////////////////////////////////////////////////////////////////////////////
diff --git a/Build/source/utils/xz-4.999.8beta/src/liblzma/check/crc64_table.c b/Build/source/utils/xz-4.999.9beta/src/liblzma/check/crc64_table.c
index 983ed31ff2f..1fbcd94703c 100644
--- a/Build/source/utils/xz-4.999.8beta/src/liblzma/check/crc64_table.c
+++ b/Build/source/utils/xz-4.999.9beta/src/liblzma/check/crc64_table.c
@@ -3,11 +3,10 @@
/// \file crc64_table.c
/// \brief Precalculated CRC64 table with correct endianness
//
-// This code has been put into the public domain.
+// Author: Lasse Collin
//
-// This library is distributed in the hope that it will be useful,
-// but WITHOUT ANY WARRANTY; without even the implied warranty of
-// MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.
+// This file has been put into the public domain.
+// You can do whatever you want with this file.
//
///////////////////////////////////////////////////////////////////////////////
diff --git a/Build/source/utils/xz-4.999.8beta/src/liblzma/check/crc64_table_be.h b/Build/source/utils/xz-4.999.9beta/src/liblzma/check/crc64_table_be.h
index ea074f397a7..ea074f397a7 100644
--- a/Build/source/utils/xz-4.999.8beta/src/liblzma/check/crc64_table_be.h
+++ b/Build/source/utils/xz-4.999.9beta/src/liblzma/check/crc64_table_be.h
diff --git a/Build/source/utils/xz-4.999.8beta/src/liblzma/check/crc64_table_le.h b/Build/source/utils/xz-4.999.9beta/src/liblzma/check/crc64_table_le.h
index 1196b31e132..1196b31e132 100644
--- a/Build/source/utils/xz-4.999.8beta/src/liblzma/check/crc64_table_le.h
+++ b/Build/source/utils/xz-4.999.9beta/src/liblzma/check/crc64_table_le.h
diff --git a/Build/source/utils/xz-4.999.8beta/src/liblzma/check/crc64_tablegen.c b/Build/source/utils/xz-4.999.9beta/src/liblzma/check/crc64_tablegen.c
index a0fa4ab2bf9..92b9a7da8ca 100644
--- a/Build/source/utils/xz-4.999.8beta/src/liblzma/check/crc64_tablegen.c
+++ b/Build/source/utils/xz-4.999.9beta/src/liblzma/check/crc64_tablegen.c
@@ -6,11 +6,10 @@
/// Compiling: gcc -std=c99 -o crc64_tablegen crc64_tablegen.c
/// Add -DWORDS_BIGENDIAN to generate big endian table.
//
-// This code has been put into the public domain.
+// Author: Lasse Collin
//
-// This library is distributed in the hope that it will be useful,
-// but WITHOUT ANY WARRANTY; without even the implied warranty of
-// MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.
+// This file has been put into the public domain.
+// You can do whatever you want with this file.
//
///////////////////////////////////////////////////////////////////////////////
diff --git a/Build/source/utils/xz-4.999.8beta/src/liblzma/check/crc64_x86.S b/Build/source/utils/xz-4.999.9beta/src/liblzma/check/crc64_x86.S
index abd8f9d400d..17de076ac9a 100644
--- a/Build/source/utils/xz-4.999.8beta/src/liblzma/check/crc64_x86.S
+++ b/Build/source/utils/xz-4.999.9beta/src/liblzma/check/crc64_x86.S
@@ -1,11 +1,14 @@
/*
* Speed-optimized CRC64 using slicing-by-four algorithm
- * Instruction set: i386
- * Optimized for: i686
*
- * This code has been put into the public domain by its authors:
- * Igor Pavlov <http://7-zip.org/>
- * Lasse Collin <lasse.collin@tukaani.org>
+ * This uses only i386 instructions, but it is optimized for i686 and later
+ * (including e.g. Pentium II/III/IV, Athlon XP, and Core 2).
+ *
+ * Authors: Igor Pavlov (original CRC32 assembly code)
+ * Lasse Collin (CRC64 adaptation of the modified CRC32 code)
+ *
+ * This file has been put into the public domain.
+ * You can do whatever you want with this file.
*
* This code needs lzma_crc64_table, which can be created using the
* following C code:
@@ -15,6 +18,7 @@ uint64_t lzma_crc64_table[4][256];
void
init_table(void)
{
+ // ECMA-182
static const uint64_t poly64 = UINT64_C(0xC96C5795D7870F42);
for (size_t s = 0; s < 4; ++s) {
@@ -53,7 +57,7 @@ init_table(void)
* Solaris assembler doesn't have .p2align, and Darwin uses .align
* differently than GNU/Linux and Solaris.
*/
-#ifdef __MACH__
+#if defined(__MACH__) || defined(__MSDOS__)
# define ALIGN(pow2, abs) .align pow2
#else
# define ALIGN(pow2, abs) .align abs
@@ -62,7 +66,8 @@ init_table(void)
.text
.globl LZMA_CRC64
-#if !defined(__MACH__) && !defined(_WIN32)
+#if !defined(__MACH__) && !defined(_WIN32) && !defined(__CYGWIN__) \
+ && !defined(__MSDOS__)
.type LZMA_CRC64, @function
#endif
@@ -95,8 +100,14 @@ LZMA_CRC64:
* by GCC but only on some systems. Testing for both makes it simpler
* to test this code without libtool, and keeps the code working also
* when built with libtool but using something else than GCC.
+ *
+ * I understood that libtool may define PIC on Windows even though
+ * the code in Windows DLLs is not PIC in sense that it is in ELF
+ * binaries, so we need a separate check to always use the non-PIC
+ * code on Windows.
*/
-#if !defined(PIC) && !defined(__PIC__)
+#if (!defined(PIC) && !defined(__PIC__)) \
+ || (defined(_WIN32) || defined(__CYGWIN__))
/* Not PIC */
movl $LZMA_CRC64_TABLE, %ebx
#elif defined(__MACH__)
@@ -254,12 +265,14 @@ LZMA_CRC64:
.indirect_symbol LZMA_CRC64_TABLE
.long 0
-#elif defined(_WIN32)
+#elif defined(_WIN32) || defined(__CYGWIN__)
+# ifdef DLL_EXPORT
/* This is equivalent of __declspec(dllexport). */
.section .drectve
.ascii " -export:lzma_crc64"
+# endif
-#else
+#elif !defined(__MSDOS__)
/* ELF */
.size LZMA_CRC64, .-LZMA_CRC64
#endif
diff --git a/Build/source/utils/xz-4.999.8beta/src/liblzma/check/crc_macros.h b/Build/source/utils/xz-4.999.9beta/src/liblzma/check/crc_macros.h
index e827d07d079..9e2c030304f 100644
--- a/Build/source/utils/xz-4.999.8beta/src/liblzma/check/crc_macros.h
+++ b/Build/source/utils/xz-4.999.9beta/src/liblzma/check/crc_macros.h
@@ -1,13 +1,12 @@
///////////////////////////////////////////////////////////////////////////////
//
-/// \file crc_macros
+/// \file crc_macros.h
/// \brief Some endian-dependent macros for CRC32 and CRC64
//
-// This code has been put into the public domain.
+// Author: Lasse Collin
//
-// This library is distributed in the hope that it will be useful,
-// but WITHOUT ANY WARRANTY; without even the implied warranty of
-// MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.
+// This file has been put into the public domain.
+// You can do whatever you want with this file.
//
///////////////////////////////////////////////////////////////////////////////
diff --git a/Build/source/utils/xz-4.999.8beta/src/liblzma/check/sha256.c b/Build/source/utils/xz-4.999.9beta/src/liblzma/check/sha256.c
index 9f90f7e723c..6053a51bf10 100644
--- a/Build/source/utils/xz-4.999.8beta/src/liblzma/check/sha256.c
+++ b/Build/source/utils/xz-4.999.9beta/src/liblzma/check/sha256.c
@@ -1,22 +1,32 @@
///////////////////////////////////////////////////////////////////////////////
//
/// \file sha256.c
-/// \brief SHA256
-//
-// Based on the public domain code found from Wei Dai's Crypto++ library
-// version 5.5.1: http://www.cryptopp.com/
-// This code has been put into the public domain.
-//
+/// \brief SHA-256
+///
/// \todo Crypto++ has x86 ASM optimizations. They use SSE so if they
/// are imported to liblzma, SSE instructions need to be used
/// conditionally to keep the code working on older boxes.
+/// We could also support using some external libary for SHA-256.
+//
+// This code is based on the code found from 7-Zip, which has a modified
+// version of the SHA-256 found from Crypto++ <http://www.cryptopp.com/>.
+// The code was modified a little to fit into liblzma.
//
-// This library is distributed in the hope that it will be useful,
-// but WITHOUT ANY WARRANTY; without even the implied warranty of
-// MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.
+// Authors: Kevin Springle
+// Wei Dai
+// Igor Pavlov
+// Lasse Collin
+//
+// This file has been put into the public domain.
+// You can do whatever you want with this file.
//
///////////////////////////////////////////////////////////////////////////////
+// Avoid bogus warnings in transform().
+#if (__GNUC__ == 4 && __GNUC_MINOR__ >= 2) || __GNUC__ > 4
+# pragma GCC diagnostic ignored "-Wuninitialized"
+#endif
+
#include "check.h"
#ifndef WORDS_BIGENDIAN
diff --git a/Build/source/utils/xz-4.999.9beta/src/liblzma/common/Makefile.inc b/Build/source/utils/xz-4.999.9beta/src/liblzma/common/Makefile.inc
new file mode 100644
index 00000000000..aaaeee93307
--- /dev/null
+++ b/Build/source/utils/xz-4.999.9beta/src/liblzma/common/Makefile.inc
@@ -0,0 +1,67 @@
+##
+## Author: Lasse Collin
+##
+## This file has been put into the public domain.
+## You can do whatever you want with this file.
+##
+
+liblzma_la_SOURCES += \
+ common/common.c \
+ common/common.h \
+ common/bsr.h \
+ common/block_util.c \
+ common/easy_preset.c \
+ common/easy_preset.h \
+ common/filter_common.c \
+ common/filter_common.h \
+ common/index.c \
+ common/index.h \
+ common/stream_flags_common.c \
+ common/stream_flags_common.h \
+ common/vli_size.c
+
+if COND_MAIN_ENCODER
+liblzma_la_SOURCES += \
+ common/alone_encoder.c \
+ common/block_buffer_encoder.c \
+ common/block_encoder.c \
+ common/block_encoder.h \
+ common/block_header_encoder.c \
+ common/easy_buffer_encoder.c \
+ common/easy_encoder.c \
+ common/easy_encoder_memusage.c \
+ common/filter_buffer_encoder.c \
+ common/filter_encoder.c \
+ common/filter_encoder.h \
+ common/filter_flags_encoder.c \
+ common/index_encoder.c \
+ common/index_encoder.h \
+ common/stream_buffer_encoder.c \
+ common/stream_encoder.c \
+ common/stream_encoder.h \
+ common/stream_flags_encoder.c \
+ common/vli_encoder.c
+endif
+
+if COND_MAIN_DECODER
+liblzma_la_SOURCES += \
+ common/alone_decoder.c \
+ common/alone_decoder.h \
+ common/auto_decoder.c \
+ common/block_buffer_decoder.c \
+ common/block_decoder.c \
+ common/block_decoder.h \
+ common/block_header_decoder.c \
+ common/easy_decoder_memusage.c \
+ common/filter_buffer_decoder.c \
+ common/filter_decoder.c \
+ common/filter_decoder.h \
+ common/filter_flags_decoder.c \
+ common/index_decoder.c \
+ common/index_hash.c \
+ common/stream_buffer_decoder.c \
+ common/stream_decoder.c \
+ common/stream_decoder.h \
+ common/stream_flags_decoder.c \
+ common/vli_decoder.c
+endif
diff --git a/Build/source/utils/xz-4.999.8beta/src/liblzma/common/alone_decoder.c b/Build/source/utils/xz-4.999.9beta/src/liblzma/common/alone_decoder.c
index 7d1672f2a16..fa7fb8399cf 100644
--- a/Build/source/utils/xz-4.999.8beta/src/liblzma/common/alone_decoder.c
+++ b/Build/source/utils/xz-4.999.9beta/src/liblzma/common/alone_decoder.c
@@ -3,17 +3,10 @@
/// \file alone_decoder.c
/// \brief Decoder for LZMA_Alone files
//
-// Copyright (C) 2007 Lasse Collin
+// Author: Lasse Collin
//
-// This library is free software; you can redistribute it and/or
-// modify it under the terms of the GNU Lesser General Public
-// License as published by the Free Software Foundation; either
-// version 2.1 of the License, or (at your option) any later version.
-//
-// This library is distributed in the hope that it will be useful,
-// but WITHOUT ANY WARRANTY; without even the implied warranty of
-// MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the GNU
-// Lesser General Public License for more details.
+// This file has been put into the public domain.
+// You can do whatever you want with this file.
//
///////////////////////////////////////////////////////////////////////////////
@@ -195,7 +188,7 @@ extern lzma_ret
lzma_alone_decoder_init(lzma_next_coder *next, lzma_allocator *allocator,
uint64_t memlimit)
{
- lzma_next_coder_init(lzma_alone_decoder_init, next, allocator);
+ lzma_next_coder_init(&lzma_alone_decoder_init, next, allocator);
if (memlimit == 0)
return LZMA_PROG_ERROR;
diff --git a/Build/source/utils/xz-4.999.9beta/src/liblzma/common/alone_decoder.h b/Build/source/utils/xz-4.999.9beta/src/liblzma/common/alone_decoder.h
new file mode 100644
index 00000000000..70d0d2a0ffa
--- /dev/null
+++ b/Build/source/utils/xz-4.999.9beta/src/liblzma/common/alone_decoder.h
@@ -0,0 +1,22 @@
+///////////////////////////////////////////////////////////////////////////////
+//
+/// \file alone_decoder.h
+/// \brief Decoder for LZMA_Alone files
+//
+// Author: Lasse Collin
+//
+// This file has been put into the public domain.
+// You can do whatever you want with this file.
+//
+///////////////////////////////////////////////////////////////////////////////
+
+#ifndef LZMA_ALONE_DECODER_H
+#define LZMA_ALONE_DECODER_H
+
+#include "common.h"
+
+
+extern lzma_ret lzma_alone_decoder_init(lzma_next_coder *next,
+ lzma_allocator *allocator, uint64_t memlimit);
+
+#endif
diff --git a/Build/source/utils/xz-4.999.8beta/src/liblzma/common/alone_encoder.c b/Build/source/utils/xz-4.999.9beta/src/liblzma/common/alone_encoder.c
index 429fbbf0426..68c9505db14 100644
--- a/Build/source/utils/xz-4.999.8beta/src/liblzma/common/alone_encoder.c
+++ b/Build/source/utils/xz-4.999.9beta/src/liblzma/common/alone_encoder.c
@@ -3,17 +3,10 @@
/// \file alone_decoder.c
/// \brief Decoder for LZMA_Alone files
//
-// Copyright (C) 2007 Lasse Collin
+// Author: Lasse Collin
//
-// This library is free software; you can redistribute it and/or
-// modify it under the terms of the GNU Lesser General Public
-// License as published by the Free Software Foundation; either
-// version 2.1 of the License, or (at your option) any later version.
-//
-// This library is distributed in the hope that it will be useful,
-// but WITHOUT ANY WARRANTY; without even the implied warranty of
-// MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the GNU
-// Lesser General Public License for more details.
+// This file has been put into the public domain.
+// You can do whatever you want with this file.
//
///////////////////////////////////////////////////////////////////////////////
@@ -85,7 +78,7 @@ static lzma_ret
alone_encoder_init(lzma_next_coder *next, lzma_allocator *allocator,
const lzma_options_lzma *options)
{
- lzma_next_coder_init(alone_encoder_init, next, allocator);
+ lzma_next_coder_init(&alone_encoder_init, next, allocator);
if (next->coder == NULL) {
next->coder = lzma_alloc(sizeof(lzma_coder), allocator);
@@ -147,7 +140,7 @@ extern lzma_ret
lzma_alone_encoder_init(lzma_next_coder *next, lzma_allocator *allocator,
const lzma_options_alone *options)
{
- lzma_next_coder_init(alone_encoder_init, next, allocator, options);
+ lzma_next_coder_init(&alone_encoder_init, next, allocator, options);
}
*/
diff --git a/Build/source/utils/xz-4.999.8beta/src/liblzma/common/auto_decoder.c b/Build/source/utils/xz-4.999.9beta/src/liblzma/common/auto_decoder.c
index 50630613ace..ae6c3e78642 100644
--- a/Build/source/utils/xz-4.999.8beta/src/liblzma/common/auto_decoder.c
+++ b/Build/source/utils/xz-4.999.9beta/src/liblzma/common/auto_decoder.c
@@ -3,17 +3,10 @@
/// \file auto_decoder.c
/// \brief Autodetect between .xz Stream and .lzma (LZMA_Alone) formats
//
-// Copyright (C) 2007 Lasse Collin
+// Author: Lasse Collin
//
-// This library is free software; you can redistribute it and/or
-// modify it under the terms of the GNU Lesser General Public
-// License as published by the Free Software Foundation; either
-// version 2.1 of the License, or (at your option) any later version.
-//
-// This library is distributed in the hope that it will be useful,
-// but WITHOUT ANY WARRANTY; without even the implied warranty of
-// MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the GNU
-// Lesser General Public License for more details.
+// This file has been put into the public domain.
+// You can do whatever you want with this file.
//
///////////////////////////////////////////////////////////////////////////////
@@ -153,7 +146,7 @@ static lzma_ret
auto_decoder_init(lzma_next_coder *next, lzma_allocator *allocator,
uint64_t memlimit, uint32_t flags)
{
- lzma_next_coder_init(auto_decoder_init, next, allocator);
+ lzma_next_coder_init(&auto_decoder_init, next, allocator);
if (memlimit == 0)
return LZMA_PROG_ERROR;
diff --git a/Build/source/utils/xz-4.999.8beta/src/liblzma/common/block_buffer_decoder.c b/Build/source/utils/xz-4.999.9beta/src/liblzma/common/block_buffer_decoder.c
index 5f22822e60f..ff27a11ccfe 100644
--- a/Build/source/utils/xz-4.999.8beta/src/liblzma/common/block_buffer_decoder.c
+++ b/Build/source/utils/xz-4.999.9beta/src/liblzma/common/block_buffer_decoder.c
@@ -3,17 +3,10 @@
/// \file block_buffer_decoder.c
/// \brief Single-call .xz Block decoder
//
-// Copyright (C) 2009 Lasse Collin
+// Author: Lasse Collin
//
-// This library is free software; you can redistribute it and/or
-// modify it under the terms of the GNU Lesser General Public
-// License as published by the Free Software Foundation; either
-// version 2.1 of the License, or (at your option) any later version.
-//
-// This library is distributed in the hope that it will be useful,
-// but WITHOUT ANY WARRANTY; without even the implied warranty of
-// MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the GNU
-// Lesser General Public License for more details.
+// This file has been put into the public domain.
+// You can do whatever you want with this file.
//
///////////////////////////////////////////////////////////////////////////////
diff --git a/Build/source/utils/xz-4.999.8beta/src/liblzma/common/block_buffer_encoder.c b/Build/source/utils/xz-4.999.9beta/src/liblzma/common/block_buffer_encoder.c
index 79587d9c25c..4d90feef50b 100644
--- a/Build/source/utils/xz-4.999.8beta/src/liblzma/common/block_buffer_encoder.c
+++ b/Build/source/utils/xz-4.999.9beta/src/liblzma/common/block_buffer_encoder.c
@@ -3,17 +3,10 @@
/// \file block_buffer_encoder.c
/// \brief Single-call .xz Block encoder
//
-// Copyright (C) 2009 Lasse Collin
+// Author: Lasse Collin
//
-// This library is free software; you can redistribute it and/or
-// modify it under the terms of the GNU Lesser General Public
-// License as published by the Free Software Foundation; either
-// version 2.1 of the License, or (at your option) any later version.
-//
-// This library is distributed in the hope that it will be useful,
-// but WITHOUT ANY WARRANTY; without even the implied warranty of
-// MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the GNU
-// Lesser General Public License for more details.
+// This file has been put into the public domain.
+// You can do whatever you want with this file.
//
///////////////////////////////////////////////////////////////////////////////
@@ -297,6 +290,7 @@ lzma_block_buffer_encode(lzma_block *block, lzma_allocator *allocator,
lzma_check_update(&check, block->check, in, in_size);
lzma_check_finish(&check, block->check);
+ memcpy(block->raw_check, check.buffer.u8, check_size);
memcpy(out + *out_pos, check.buffer.u8, check_size);
*out_pos += check_size;
}
diff --git a/Build/source/utils/xz-4.999.8beta/src/liblzma/common/block_decoder.c b/Build/source/utils/xz-4.999.9beta/src/liblzma/common/block_decoder.c
index eea0759d9b5..a3ce6f49500 100644
--- a/Build/source/utils/xz-4.999.8beta/src/liblzma/common/block_decoder.c
+++ b/Build/source/utils/xz-4.999.9beta/src/liblzma/common/block_decoder.c
@@ -3,17 +3,10 @@
/// \file block_decoder.c
/// \brief Decodes .xz Blocks
//
-// Copyright (C) 2007 Lasse Collin
+// Author: Lasse Collin
//
-// This library is free software; you can redistribute it and/or
-// modify it under the terms of the GNU Lesser General Public
-// License as published by the Free Software Foundation; either
-// version 2.1 of the License, or (at your option) any later version.
-//
-// This library is distributed in the hope that it will be useful,
-// but WITHOUT ANY WARRANTY; without even the implied warranty of
-// MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the GNU
-// Lesser General Public License for more details.
+// This file has been put into the public domain.
+// You can do whatever you want with this file.
//
///////////////////////////////////////////////////////////////////////////////
@@ -153,26 +146,22 @@ block_decode(lzma_coder *coder, lzma_allocator *allocator,
// Fall through
case SEQ_CHECK: {
- const bool chksup = lzma_check_is_supported(
- coder->block->check);
-
- while (*in_pos < in_size) {
- // coder->check.buffer[] may be uninitialized when
- // the Check ID is not supported.
- if (chksup && coder->check.buffer.u8[coder->check_pos]
- != in[*in_pos]) {
- ++*in_pos;
- return LZMA_DATA_ERROR;
- }
-
- ++*in_pos;
-
- if (++coder->check_pos == lzma_check_size(
- coder->block->check))
- return LZMA_STREAM_END;
- }
+ const size_t check_size = lzma_check_size(coder->block->check);
+ lzma_bufcpy(in, in_pos, in_size, coder->block->raw_check,
+ &coder->check_pos, check_size);
+ if (coder->check_pos < check_size)
+ return LZMA_OK;
+
+ // Validate the Check only if we support it.
+ // coder->check.buffer may be uninitialized
+ // when the Check ID is not supported.
+ if (lzma_check_is_supported(coder->block->check)
+ && memcmp(coder->block->raw_check,
+ coder->check.buffer.u8,
+ check_size) != 0)
+ return LZMA_DATA_ERROR;
- return LZMA_OK;
+ return LZMA_STREAM_END;
}
}
@@ -193,7 +182,7 @@ extern lzma_ret
lzma_block_decoder_init(lzma_next_coder *next, lzma_allocator *allocator,
lzma_block *block)
{
- lzma_next_coder_init(lzma_block_decoder_init, next, allocator);
+ lzma_next_coder_init(&lzma_block_decoder_init, next, allocator);
// Validate the options. lzma_block_unpadded_size() does that for us
// except for Uncompressed Size and filters. Filters are validated
diff --git a/Build/source/utils/xz-4.999.9beta/src/liblzma/common/block_decoder.h b/Build/source/utils/xz-4.999.9beta/src/liblzma/common/block_decoder.h
new file mode 100644
index 00000000000..7da9df63f76
--- /dev/null
+++ b/Build/source/utils/xz-4.999.9beta/src/liblzma/common/block_decoder.h
@@ -0,0 +1,22 @@
+///////////////////////////////////////////////////////////////////////////////
+//
+/// \file block_decoder.h
+/// \brief Decodes .xz Blocks
+//
+// Author: Lasse Collin
+//
+// This file has been put into the public domain.
+// You can do whatever you want with this file.
+//
+///////////////////////////////////////////////////////////////////////////////
+
+#ifndef LZMA_BLOCK_DECODER_H
+#define LZMA_BLOCK_DECODER_H
+
+#include "common.h"
+
+
+extern lzma_ret lzma_block_decoder_init(lzma_next_coder *next,
+ lzma_allocator *allocator, lzma_block *block);
+
+#endif
diff --git a/Build/source/utils/xz-4.999.8beta/src/liblzma/common/block_encoder.c b/Build/source/utils/xz-4.999.9beta/src/liblzma/common/block_encoder.c
index 8492eb2f2b4..567889aa2f6 100644
--- a/Build/source/utils/xz-4.999.8beta/src/liblzma/common/block_encoder.c
+++ b/Build/source/utils/xz-4.999.9beta/src/liblzma/common/block_encoder.c
@@ -3,17 +3,10 @@
/// \file block_encoder.c
/// \brief Encodes .xz Blocks
//
-// Copyright (C) 2007 Lasse Collin
+// Author: Lasse Collin
//
-// This library is free software; you can redistribute it and/or
-// modify it under the terms of the GNU Lesser General Public
-// License as published by the Free Software Foundation; either
-// version 2.1 of the License, or (at your option) any later version.
-//
-// This library is distributed in the hope that it will be useful,
-// but WITHOUT ANY WARRANTY; without even the implied warranty of
-// MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the GNU
-// Lesser General Public License for more details.
+// This file has been put into the public domain.
+// You can do whatever you want with this file.
//
///////////////////////////////////////////////////////////////////////////////
@@ -124,18 +117,15 @@ block_encode(lzma_coder *coder, lzma_allocator *allocator,
// Fall through
case SEQ_CHECK: {
- const uint32_t check_size
- = lzma_check_size(coder->block->check);
-
- while (*out_pos < out_size) {
- out[*out_pos] = coder->check.buffer.u8[coder->pos];
- ++*out_pos;
-
- if (++coder->pos == check_size)
- return LZMA_STREAM_END;
- }
-
- return LZMA_OK;
+ const size_t check_size = lzma_check_size(coder->block->check);
+ lzma_bufcpy(coder->check.buffer.u8, &coder->pos, check_size,
+ out, out_pos, out_size);
+ if (coder->pos < check_size)
+ return LZMA_OK;
+
+ memcpy(coder->block->raw_check, coder->check.buffer.u8,
+ check_size);
+ return LZMA_STREAM_END;
}
}
@@ -156,7 +146,7 @@ extern lzma_ret
lzma_block_encoder_init(lzma_next_coder *next, lzma_allocator *allocator,
lzma_block *block)
{
- lzma_next_coder_init(lzma_block_encoder_init, next, allocator);
+ lzma_next_coder_init(&lzma_block_encoder_init, next, allocator);
if (block->version != 0)
return LZMA_OPTIONS_ERROR;
diff --git a/Build/source/utils/xz-4.999.8beta/src/liblzma/common/block_encoder.h b/Build/source/utils/xz-4.999.9beta/src/liblzma/common/block_encoder.h
index 3113dab74e7..b9eff0be273 100644
--- a/Build/source/utils/xz-4.999.8beta/src/liblzma/common/block_encoder.h
+++ b/Build/source/utils/xz-4.999.9beta/src/liblzma/common/block_encoder.h
@@ -3,17 +3,10 @@
/// \file block_encoder.h
/// \brief Encodes .xz Blocks
//
-// Copyright (C) 2007 Lasse Collin
+// Author: Lasse Collin
//
-// This library is free software; you can redistribute it and/or
-// modify it under the terms of the GNU Lesser General Public
-// License as published by the Free Software Foundation; either
-// version 2.1 of the License, or (at your option) any later version.
-//
-// This library is distributed in the hope that it will be useful,
-// but WITHOUT ANY WARRANTY; without even the implied warranty of
-// MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the GNU
-// Lesser General Public License for more details.
+// This file has been put into the public domain.
+// You can do whatever you want with this file.
//
///////////////////////////////////////////////////////////////////////////////
diff --git a/Build/source/utils/xz-4.999.8beta/src/liblzma/common/block_header_decoder.c b/Build/source/utils/xz-4.999.9beta/src/liblzma/common/block_header_decoder.c
index 096d4620e1d..868f71b2ddd 100644
--- a/Build/source/utils/xz-4.999.8beta/src/liblzma/common/block_header_decoder.c
+++ b/Build/source/utils/xz-4.999.9beta/src/liblzma/common/block_header_decoder.c
@@ -3,17 +3,10 @@
/// \file block_header_decoder.c
/// \brief Decodes Block Header from .xz files
//
-// Copyright (C) 2007 Lasse Collin
+// Author: Lasse Collin
//
-// This library is free software; you can redistribute it and/or
-// modify it under the terms of the GNU Lesser General Public
-// License as published by the Free Software Foundation; either
-// version 2.1 of the License, or (at your option) any later version.
-//
-// This library is distributed in the hope that it will be useful,
-// but WITHOUT ANY WARRANTY; without even the implied warranty of
-// MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the GNU
-// Lesser General Public License for more details.
+// This file has been put into the public domain.
+// You can do whatever you want with this file.
//
///////////////////////////////////////////////////////////////////////////////
diff --git a/Build/source/utils/xz-4.999.8beta/src/liblzma/common/block_header_encoder.c b/Build/source/utils/xz-4.999.9beta/src/liblzma/common/block_header_encoder.c
index 1dd9eab27be..8bef63b53d2 100644
--- a/Build/source/utils/xz-4.999.8beta/src/liblzma/common/block_header_encoder.c
+++ b/Build/source/utils/xz-4.999.9beta/src/liblzma/common/block_header_encoder.c
@@ -3,17 +3,10 @@
/// \file block_header_encoder.c
/// \brief Encodes Block Header for .xz files
//
-// Copyright (C) 2007 Lasse Collin
+// Author: Lasse Collin
//
-// This library is free software; you can redistribute it and/or
-// modify it under the terms of the GNU Lesser General Public
-// License as published by the Free Software Foundation; either
-// version 2.1 of the License, or (at your option) any later version.
-//
-// This library is distributed in the hope that it will be useful,
-// but WITHOUT ANY WARRANTY; without even the implied warranty of
-// MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the GNU
-// Lesser General Public License for more details.
+// This file has been put into the public domain.
+// You can do whatever you want with this file.
//
///////////////////////////////////////////////////////////////////////////////
diff --git a/Build/source/utils/xz-4.999.8beta/src/liblzma/common/block_util.c b/Build/source/utils/xz-4.999.9beta/src/liblzma/common/block_util.c
index 2a9505074a7..cb9cde255e6 100644
--- a/Build/source/utils/xz-4.999.8beta/src/liblzma/common/block_util.c
+++ b/Build/source/utils/xz-4.999.9beta/src/liblzma/common/block_util.c
@@ -3,17 +3,10 @@
/// \file block_header.c
/// \brief Utility functions to handle lzma_block
//
-// Copyright (C) 2008 Lasse Collin
+// Author: Lasse Collin
//
-// This library is free software; you can redistribute it and/or
-// modify it under the terms of the GNU Lesser General Public
-// License as published by the Free Software Foundation; either
-// version 2.1 of the License, or (at your option) any later version.
-//
-// This library is distributed in the hope that it will be useful,
-// but WITHOUT ANY WARRANTY; without even the implied warranty of
-// MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the GNU
-// Lesser General Public License for more details.
+// This file has been put into the public domain.
+// You can do whatever you want with this file.
//
///////////////////////////////////////////////////////////////////////////////
diff --git a/Build/source/utils/xz-4.999.8beta/src/liblzma/common/bsr.h b/Build/source/utils/xz-4.999.9beta/src/liblzma/common/bsr.h
index fd5d3b0489f..bef8641fa73 100644
--- a/Build/source/utils/xz-4.999.8beta/src/liblzma/common/bsr.h
+++ b/Build/source/utils/xz-4.999.9beta/src/liblzma/common/bsr.h
@@ -3,11 +3,10 @@
/// \file bsr.h
/// \brief Bit scan reverse
//
-// This code has been put into the public domain.
+// Author: Lasse Collin
//
-// This library is distributed in the hope that it will be useful,
-// but WITHOUT ANY WARRANTY; without even the implied warranty of
-// MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.
+// This file has been put into the public domain.
+// You can do whatever you want with this file.
//
///////////////////////////////////////////////////////////////////////////////
diff --git a/Build/source/utils/xz-4.999.8beta/src/liblzma/common/common.c b/Build/source/utils/xz-4.999.9beta/src/liblzma/common/common.c
index b173397345c..3bdf32522a3 100644
--- a/Build/source/utils/xz-4.999.8beta/src/liblzma/common/common.c
+++ b/Build/source/utils/xz-4.999.9beta/src/liblzma/common/common.c
@@ -3,17 +3,10 @@
/// \file common.h
/// \brief Common functions needed in many places in liblzma
//
-// Copyright (C) 2007-2008 Lasse Collin
+// Author: Lasse Collin
//
-// This library is free software; you can redistribute it and/or
-// modify it under the terms of the GNU Lesser General Public
-// License as published by the Free Software Foundation; either
-// version 2.1 of the License, or (at your option) any later version.
-//
-// This library is distributed in the hope that it will be useful,
-// but WITHOUT ANY WARRANTY; without even the implied warranty of
-// MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the GNU
-// Lesser General Public License for more details.
+// This file has been put into the public domain.
+// You can do whatever you want with this file.
//
///////////////////////////////////////////////////////////////////////////////
@@ -34,7 +27,7 @@ lzma_version_number(void)
extern LZMA_API(const char *)
lzma_version_string(void)
{
- return PACKAGE_VERSION;
+ return LZMA_VERSION_STRING;
}
diff --git a/Build/source/utils/xz-4.999.8beta/src/liblzma/common/common.h b/Build/source/utils/xz-4.999.9beta/src/liblzma/common/common.h
index cbb2eb9b8b7..d794cb30e3b 100644
--- a/Build/source/utils/xz-4.999.8beta/src/liblzma/common/common.h
+++ b/Build/source/utils/xz-4.999.9beta/src/liblzma/common/common.h
@@ -3,29 +3,26 @@
/// \file common.h
/// \brief Definitions common to the whole liblzma library
//
-// Copyright (C) 2007-2008 Lasse Collin
+// Author: Lasse Collin
//
-// This library is free software; you can redistribute it and/or
-// modify it under the terms of the GNU Lesser General Public
-// License as published by the Free Software Foundation; either
-// version 2.1 of the License, or (at your option) any later version.
-//
-// This library is distributed in the hope that it will be useful,
-// but WITHOUT ANY WARRANTY; without even the implied warranty of
-// MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the GNU
-// Lesser General Public License for more details.
+// This file has been put into the public domain.
+// You can do whatever you want with this file.
//
///////////////////////////////////////////////////////////////////////////////
#ifndef LZMA_COMMON_H
#define LZMA_COMMON_H
-#include "../../common/sysdefs.h"
-#include "../../common/mythread.h"
-#include "../../common/integer.h"
+#include "sysdefs.h"
+#include "mythread.h"
+#include "integer.h"
-#if defined(_WIN32)
-# define LZMA_API_EXPORT __declspec(dllexport)
+#if defined(_WIN32) || defined(__CYGWIN__)
+# ifdef DLL_EXPORT
+# define LZMA_API_EXPORT __declspec(dllexport)
+# else
+# define LZMA_API_EXPORT
+# endif
// Don't use ifdef or defined() below.
#elif HAVE_VISIBILITY
# define LZMA_API_EXPORT __attribute__((__visibility__("default")))
@@ -247,9 +244,9 @@ do { \
/// next->init to func is still OK.
#define lzma_next_coder_init(func, next, allocator) \
do { \
- if ((uintptr_t)(&func) != (next)->init) \
+ if ((uintptr_t)(func) != (next)->init) \
lzma_next_end(next, allocator); \
- (next)->init = (uintptr_t)(&func); \
+ (next)->init = (uintptr_t)(func); \
} while (0)
diff --git a/Build/source/utils/xz-4.999.9beta/src/liblzma/common/easy_buffer_encoder.c b/Build/source/utils/xz-4.999.9beta/src/liblzma/common/easy_buffer_encoder.c
new file mode 100644
index 00000000000..c4be34ccfa2
--- /dev/null
+++ b/Build/source/utils/xz-4.999.9beta/src/liblzma/common/easy_buffer_encoder.c
@@ -0,0 +1,27 @@
+///////////////////////////////////////////////////////////////////////////////
+//
+/// \file easy_buffer_encoder.c
+/// \brief Easy single-call .xz Stream encoder
+//
+// Author: Lasse Collin
+//
+// This file has been put into the public domain.
+// You can do whatever you want with this file.
+//
+///////////////////////////////////////////////////////////////////////////////
+
+#include "easy_preset.h"
+
+
+extern LZMA_API(lzma_ret)
+lzma_easy_buffer_encode(uint32_t preset, lzma_check check,
+ lzma_allocator *allocator, const uint8_t *in, size_t in_size,
+ uint8_t *out, size_t *out_pos, size_t out_size)
+{
+ lzma_options_easy opt_easy;
+ if (lzma_easy_preset(&opt_easy, preset))
+ return LZMA_OPTIONS_ERROR;
+
+ return lzma_stream_buffer_encode(opt_easy.filters, check,
+ allocator, in, in_size, out, out_pos, out_size);
+}
diff --git a/Build/source/utils/xz-4.999.9beta/src/liblzma/common/easy_decoder_memusage.c b/Build/source/utils/xz-4.999.9beta/src/liblzma/common/easy_decoder_memusage.c
new file mode 100644
index 00000000000..20bcd5b7175
--- /dev/null
+++ b/Build/source/utils/xz-4.999.9beta/src/liblzma/common/easy_decoder_memusage.c
@@ -0,0 +1,24 @@
+///////////////////////////////////////////////////////////////////////////////
+//
+/// \file easy_decoder_memusage.c
+/// \brief Decoder memory usage calculation to match easy encoder presets
+//
+// Author: Lasse Collin
+//
+// This file has been put into the public domain.
+// You can do whatever you want with this file.
+//
+///////////////////////////////////////////////////////////////////////////////
+
+#include "easy_preset.h"
+
+
+extern LZMA_API(uint64_t)
+lzma_easy_decoder_memusage(uint32_t preset)
+{
+ lzma_options_easy opt_easy;
+ if (lzma_easy_preset(&opt_easy, preset))
+ return UINT32_MAX;
+
+ return lzma_raw_decoder_memusage(opt_easy.filters);
+}
diff --git a/Build/source/utils/xz-4.999.8beta/src/liblzma/common/easy.c b/Build/source/utils/xz-4.999.9beta/src/liblzma/common/easy_encoder.c
index 8147a5b5c23..5e2641c99f2 100644
--- a/Build/source/utils/xz-4.999.8beta/src/liblzma/common/easy.c
+++ b/Build/source/utils/xz-4.999.9beta/src/liblzma/common/easy_encoder.c
@@ -1,51 +1,25 @@
///////////////////////////////////////////////////////////////////////////////
//
-/// \file easy.c
-/// \brief Easy Stream encoder initialization
+/// \file easy_encoder.c
+/// \brief Easy .xz Stream encoder initialization
//
-// Copyright (C) 2008 Lasse Collin
+// Author: Lasse Collin
//
-// This library is free software; you can redistribute it and/or
-// modify it under the terms of the GNU Lesser General Public
-// License as published by the Free Software Foundation; either
-// version 2.1 of the License, or (at your option) any later version.
-//
-// This library is distributed in the hope that it will be useful,
-// but WITHOUT ANY WARRANTY; without even the implied warranty of
-// MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the GNU
-// Lesser General Public License for more details.
+// This file has been put into the public domain.
+// You can do whatever you want with this file.
//
///////////////////////////////////////////////////////////////////////////////
+#include "easy_preset.h"
#include "stream_encoder.h"
struct lzma_coder_s {
lzma_next_coder stream_encoder;
-
- /// Options for LZMA2
- lzma_options_lzma opt_lzma;
-
- /// We need to keep the filters array available in case
- /// LZMA_FULL_FLUSH is used.
- lzma_filter filters[LZMA_FILTERS_MAX + 1];
+ lzma_options_easy opt_easy;
};
-static bool
-easy_set_filters(lzma_coder *coder, uint32_t preset)
-{
- if (lzma_lzma_preset(&coder->opt_lzma, preset))
- return true;
-
- coder->filters[0].id = LZMA_FILTER_LZMA2;
- coder->filters[0].options = &coder->opt_lzma;
- coder->filters[1].id = LZMA_VLI_UNKNOWN;
-
- return false;
-}
-
-
static lzma_ret
easy_encode(lzma_coder *coder, lzma_allocator *allocator,
const uint8_t *restrict in, size_t *restrict in_pos,
@@ -71,7 +45,7 @@ static lzma_ret
easy_encoder_init(lzma_next_coder *next, lzma_allocator *allocator,
uint32_t preset, lzma_check check)
{
- lzma_next_coder_init(easy_encoder_init, next, allocator);
+ lzma_next_coder_init(&easy_encoder_init, next, allocator);
if (next->coder == NULL) {
next->coder = lzma_alloc(sizeof(lzma_coder), allocator);
@@ -84,11 +58,11 @@ easy_encoder_init(lzma_next_coder *next, lzma_allocator *allocator,
next->coder->stream_encoder = LZMA_NEXT_CODER_INIT;
}
- if (easy_set_filters(next->coder, preset))
+ if (lzma_easy_preset(&next->coder->opt_easy, preset))
return LZMA_OPTIONS_ERROR;
return lzma_stream_encoder_init(&next->coder->stream_encoder,
- allocator, next->coder->filters, check);
+ allocator, next->coder->opt_easy.filters, check);
}
@@ -104,25 +78,3 @@ lzma_easy_encoder(lzma_stream *strm, uint32_t preset, lzma_check check)
return LZMA_OK;
}
-
-
-extern LZMA_API(uint64_t)
-lzma_easy_encoder_memusage(uint32_t preset)
-{
- lzma_coder coder;
- if (easy_set_filters(&coder, preset))
- return UINT32_MAX;
-
- return lzma_raw_encoder_memusage(coder.filters);
-}
-
-
-extern LZMA_API(uint64_t)
-lzma_easy_decoder_memusage(uint32_t preset)
-{
- lzma_coder coder;
- if (easy_set_filters(&coder, preset))
- return UINT32_MAX;
-
- return lzma_raw_decoder_memusage(coder.filters);
-}
diff --git a/Build/source/utils/xz-4.999.9beta/src/liblzma/common/easy_encoder_memusage.c b/Build/source/utils/xz-4.999.9beta/src/liblzma/common/easy_encoder_memusage.c
new file mode 100644
index 00000000000..e9105758423
--- /dev/null
+++ b/Build/source/utils/xz-4.999.9beta/src/liblzma/common/easy_encoder_memusage.c
@@ -0,0 +1,24 @@
+///////////////////////////////////////////////////////////////////////////////
+//
+/// \file easy_encoder_memusage.c
+/// \brief Easy .xz Stream encoder memory usage calculation
+//
+// Author: Lasse Collin
+//
+// This file has been put into the public domain.
+// You can do whatever you want with this file.
+//
+///////////////////////////////////////////////////////////////////////////////
+
+#include "easy_preset.h"
+
+
+extern LZMA_API(uint64_t)
+lzma_easy_encoder_memusage(uint32_t preset)
+{
+ lzma_options_easy opt_easy;
+ if (lzma_easy_preset(&opt_easy, preset))
+ return UINT32_MAX;
+
+ return lzma_raw_encoder_memusage(opt_easy.filters);
+}
diff --git a/Build/source/utils/xz-4.999.9beta/src/liblzma/common/easy_preset.c b/Build/source/utils/xz-4.999.9beta/src/liblzma/common/easy_preset.c
new file mode 100644
index 00000000000..2f9859860ad
--- /dev/null
+++ b/Build/source/utils/xz-4.999.9beta/src/liblzma/common/easy_preset.c
@@ -0,0 +1,27 @@
+///////////////////////////////////////////////////////////////////////////////
+//
+/// \file easy_preset.c
+/// \brief Preset handling for easy encoder and decoder
+//
+// Author: Lasse Collin
+//
+// This file has been put into the public domain.
+// You can do whatever you want with this file.
+//
+///////////////////////////////////////////////////////////////////////////////
+
+#include "easy_preset.h"
+
+
+extern bool
+lzma_easy_preset(lzma_options_easy *opt_easy, uint32_t preset)
+{
+ if (lzma_lzma_preset(&opt_easy->opt_lzma, preset))
+ return true;
+
+ opt_easy->filters[0].id = LZMA_FILTER_LZMA2;
+ opt_easy->filters[0].options = &opt_easy->opt_lzma;
+ opt_easy->filters[1].id = LZMA_VLI_UNKNOWN;
+
+ return false;
+}
diff --git a/Build/source/utils/xz-4.999.9beta/src/liblzma/common/easy_preset.h b/Build/source/utils/xz-4.999.9beta/src/liblzma/common/easy_preset.h
new file mode 100644
index 00000000000..382ade89406
--- /dev/null
+++ b/Build/source/utils/xz-4.999.9beta/src/liblzma/common/easy_preset.h
@@ -0,0 +1,32 @@
+///////////////////////////////////////////////////////////////////////////////
+//
+/// \file easy_preset.h
+/// \brief Preset handling for easy encoder and decoder
+//
+// Author: Lasse Collin
+//
+// This file has been put into the public domain.
+// You can do whatever you want with this file.
+//
+///////////////////////////////////////////////////////////////////////////////
+
+#include "common.h"
+
+
+typedef struct {
+ /// We need to keep the filters array available in case
+ /// LZMA_FULL_FLUSH is used.
+ lzma_filter filters[LZMA_FILTERS_MAX + 1];
+
+ /// Options for LZMA2
+ lzma_options_lzma opt_lzma;
+
+ // Options for more filters can be added later, so this struct
+ // is not ready to be put into the public API.
+
+} lzma_options_easy;
+
+
+/// Set *easy to the settings given by the preset. Returns true on error,
+/// false on success.
+extern bool lzma_easy_preset(lzma_options_easy *easy, uint32_t preset);
diff --git a/Build/source/utils/xz-4.999.8beta/src/liblzma/common/filter_buffer_decoder.c b/Build/source/utils/xz-4.999.9beta/src/liblzma/common/filter_buffer_decoder.c
index ab50d2d744f..4fe5d78e173 100644
--- a/Build/source/utils/xz-4.999.8beta/src/liblzma/common/filter_buffer_decoder.c
+++ b/Build/source/utils/xz-4.999.9beta/src/liblzma/common/filter_buffer_decoder.c
@@ -3,17 +3,10 @@
/// \file filter_buffer_decoder.c
/// \brief Single-call raw decoding
//
-// Copyright (C) 2009 Lasse Collin
+// Author: Lasse Collin
//
-// This library is free software; you can redistribute it and/or
-// modify it under the terms of the GNU Lesser General Public
-// License as published by the Free Software Foundation; either
-// version 2.1 of the License, or (at your option) any later version.
-//
-// This library is distributed in the hope that it will be useful,
-// but WITHOUT ANY WARRANTY; without even the implied warranty of
-// MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the GNU
-// Lesser General Public License for more details.
+// This file has been put into the public domain.
+// You can do whatever you want with this file.
//
///////////////////////////////////////////////////////////////////////////////
diff --git a/Build/source/utils/xz-4.999.8beta/src/liblzma/common/filter_buffer_encoder.c b/Build/source/utils/xz-4.999.9beta/src/liblzma/common/filter_buffer_encoder.c
index b146a9e9877..646e1b30374 100644
--- a/Build/source/utils/xz-4.999.8beta/src/liblzma/common/filter_buffer_encoder.c
+++ b/Build/source/utils/xz-4.999.9beta/src/liblzma/common/filter_buffer_encoder.c
@@ -3,17 +3,10 @@
/// \file filter_buffer_encoder.c
/// \brief Single-call raw encoding
//
-// Copyright (C) 2009 Lasse Collin
+// Author: Lasse Collin
//
-// This library is free software; you can redistribute it and/or
-// modify it under the terms of the GNU Lesser General Public
-// License as published by the Free Software Foundation; either
-// version 2.1 of the License, or (at your option) any later version.
-//
-// This library is distributed in the hope that it will be useful,
-// but WITHOUT ANY WARRANTY; without even the implied warranty of
-// MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the GNU
-// Lesser General Public License for more details.
+// This file has been put into the public domain.
+// You can do whatever you want with this file.
//
///////////////////////////////////////////////////////////////////////////////
diff --git a/Build/source/utils/xz-4.999.8beta/src/liblzma/common/filter_common.c b/Build/source/utils/xz-4.999.9beta/src/liblzma/common/filter_common.c
index 1a5860c8fe0..ca1196aa3e5 100644
--- a/Build/source/utils/xz-4.999.8beta/src/liblzma/common/filter_common.c
+++ b/Build/source/utils/xz-4.999.9beta/src/liblzma/common/filter_common.c
@@ -3,17 +3,10 @@
/// \file filter_common.c
/// \brief Filter-specific stuff common for both encoder and decoder
//
-// Copyright (C) 2008 Lasse Collin
+// Author: Lasse Collin
//
-// This library is free software; you can redistribute it and/or
-// modify it under the terms of the GNU Lesser General Public
-// License as published by the Free Software Foundation; either
-// version 2.1 of the License, or (at your option) any later version.
-//
-// This library is distributed in the hope that it will be useful,
-// but WITHOUT ANY WARRANTY; without even the implied warranty of
-// MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the GNU
-// Lesser General Public License for more details.
+// This file has been put into the public domain.
+// You can do whatever you want with this file.
//
///////////////////////////////////////////////////////////////////////////////
diff --git a/Build/source/utils/xz-4.999.8beta/src/liblzma/common/filter_common.h b/Build/source/utils/xz-4.999.9beta/src/liblzma/common/filter_common.h
index a401ee7650b..cd61fc0724f 100644
--- a/Build/source/utils/xz-4.999.8beta/src/liblzma/common/filter_common.h
+++ b/Build/source/utils/xz-4.999.9beta/src/liblzma/common/filter_common.h
@@ -3,17 +3,10 @@
/// \file filter_common.c
/// \brief Filter-specific stuff common for both encoder and decoder
//
-// Copyright (C) 2008 Lasse Collin
+// Author: Lasse Collin
//
-// This library is free software; you can redistribute it and/or
-// modify it under the terms of the GNU Lesser General Public
-// License as published by the Free Software Foundation; either
-// version 2.1 of the License, or (at your option) any later version.
-//
-// This library is distributed in the hope that it will be useful,
-// but WITHOUT ANY WARRANTY; without even the implied warranty of
-// MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the GNU
-// Lesser General Public License for more details.
+// This file has been put into the public domain.
+// You can do whatever you want with this file.
//
///////////////////////////////////////////////////////////////////////////////
diff --git a/Build/source/utils/xz-4.999.8beta/src/liblzma/common/filter_decoder.c b/Build/source/utils/xz-4.999.9beta/src/liblzma/common/filter_decoder.c
index 050bdd9af1f..95f77b76cf7 100644
--- a/Build/source/utils/xz-4.999.8beta/src/liblzma/common/filter_decoder.c
+++ b/Build/source/utils/xz-4.999.9beta/src/liblzma/common/filter_decoder.c
@@ -3,17 +3,10 @@
/// \file filter_decoder.c
/// \brief Filter ID mapping to filter-specific functions
//
-// Copyright (C) 2008 Lasse Collin
+// Author: Lasse Collin
//
-// This library is free software; you can redistribute it and/or
-// modify it under the terms of the GNU Lesser General Public
-// License as published by the Free Software Foundation; either
-// version 2.1 of the License, or (at your option) any later version.
-//
-// This library is distributed in the hope that it will be useful,
-// but WITHOUT ANY WARRANTY; without even the implied warranty of
-// MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the GNU
-// Lesser General Public License for more details.
+// This file has been put into the public domain.
+// You can do whatever you want with this file.
//
///////////////////////////////////////////////////////////////////////////////
diff --git a/Build/source/utils/xz-4.999.9beta/src/liblzma/common/filter_decoder.h b/Build/source/utils/xz-4.999.9beta/src/liblzma/common/filter_decoder.h
new file mode 100644
index 00000000000..d5c68bdd4a6
--- /dev/null
+++ b/Build/source/utils/xz-4.999.9beta/src/liblzma/common/filter_decoder.h
@@ -0,0 +1,23 @@
+///////////////////////////////////////////////////////////////////////////////
+//
+/// \file filter_decoder.c
+/// \brief Filter ID mapping to filter-specific functions
+//
+// Author: Lasse Collin
+//
+// This file has been put into the public domain.
+// You can do whatever you want with this file.
+//
+///////////////////////////////////////////////////////////////////////////////
+
+#ifndef LZMA_FILTER_DECODER_H
+#define LZMA_FILTER_DECODER_H
+
+#include "common.h"
+
+
+extern lzma_ret lzma_raw_decoder_init(
+ lzma_next_coder *next, lzma_allocator *allocator,
+ const lzma_filter *options);
+
+#endif
diff --git a/Build/source/utils/xz-4.999.8beta/src/liblzma/common/filter_encoder.c b/Build/source/utils/xz-4.999.9beta/src/liblzma/common/filter_encoder.c
index 8d94031b9cd..d6fb82e511b 100644
--- a/Build/source/utils/xz-4.999.8beta/src/liblzma/common/filter_encoder.c
+++ b/Build/source/utils/xz-4.999.9beta/src/liblzma/common/filter_encoder.c
@@ -3,17 +3,10 @@
/// \file filter_decoder.c
/// \brief Filter ID mapping to filter-specific functions
//
-// Copyright (C) 2008 Lasse Collin
+// Author: Lasse Collin
//
-// This library is free software; you can redistribute it and/or
-// modify it under the terms of the GNU Lesser General Public
-// License as published by the Free Software Foundation; either
-// version 2.1 of the License, or (at your option) any later version.
-//
-// This library is distributed in the hope that it will be useful,
-// but WITHOUT ANY WARRANTY; without even the implied warranty of
-// MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the GNU
-// Lesser General Public License for more details.
+// This file has been put into the public domain.
+// You can do whatever you want with this file.
//
///////////////////////////////////////////////////////////////////////////////
diff --git a/Build/source/utils/xz-4.999.8beta/src/liblzma/common/filter_encoder.h b/Build/source/utils/xz-4.999.9beta/src/liblzma/common/filter_encoder.h
index 552012584ad..5b65cd305a9 100644
--- a/Build/source/utils/xz-4.999.8beta/src/liblzma/common/filter_encoder.h
+++ b/Build/source/utils/xz-4.999.9beta/src/liblzma/common/filter_encoder.h
@@ -3,17 +3,10 @@
/// \file filter_encoder.c
/// \brief Filter ID mapping to filter-specific functions
//
-// Copyright (C) 2008 Lasse Collin
+// Author: Lasse Collin
//
-// This library is free software; you can redistribute it and/or
-// modify it under the terms of the GNU Lesser General Public
-// License as published by the Free Software Foundation; either
-// version 2.1 of the License, or (at your option) any later version.
-//
-// This library is distributed in the hope that it will be useful,
-// but WITHOUT ANY WARRANTY; without even the implied warranty of
-// MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the GNU
-// Lesser General Public License for more details.
+// This file has been put into the public domain.
+// You can do whatever you want with this file.
//
///////////////////////////////////////////////////////////////////////////////
diff --git a/Build/source/utils/xz-4.999.8beta/src/liblzma/common/filter_flags_decoder.c b/Build/source/utils/xz-4.999.9beta/src/liblzma/common/filter_flags_decoder.c
index 345b565f267..caae10ce79a 100644
--- a/Build/source/utils/xz-4.999.8beta/src/liblzma/common/filter_flags_decoder.c
+++ b/Build/source/utils/xz-4.999.9beta/src/liblzma/common/filter_flags_decoder.c
@@ -3,17 +3,10 @@
/// \file filter_flags_decoder.c
/// \brief Decodes a Filter Flags field
//
-// Copyright (C) 2007 Lasse Collin
+// Author: Lasse Collin
//
-// This library is free software; you can redistribute it and/or
-// modify it under the terms of the GNU Lesser General Public
-// License as published by the Free Software Foundation; either
-// version 2.1 of the License, or (at your option) any later version.
-//
-// This library is distributed in the hope that it will be useful,
-// but WITHOUT ANY WARRANTY; without even the implied warranty of
-// MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the GNU
-// Lesser General Public License for more details.
+// This file has been put into the public domain.
+// You can do whatever you want with this file.
//
///////////////////////////////////////////////////////////////////////////////
diff --git a/Build/source/utils/xz-4.999.8beta/src/liblzma/common/filter_flags_encoder.c b/Build/source/utils/xz-4.999.9beta/src/liblzma/common/filter_flags_encoder.c
index da8a34fd2f1..d110566de99 100644
--- a/Build/source/utils/xz-4.999.8beta/src/liblzma/common/filter_flags_encoder.c
+++ b/Build/source/utils/xz-4.999.9beta/src/liblzma/common/filter_flags_encoder.c
@@ -3,17 +3,10 @@
/// \file filter_flags_encoder.c
/// \brief Decodes a Filter Flags field
//
-// Copyright (C) 2007 Lasse Collin
+// Author: Lasse Collin
//
-// This library is free software; you can redistribute it and/or
-// modify it under the terms of the GNU Lesser General Public
-// License as published by the Free Software Foundation; either
-// version 2.1 of the License, or (at your option) any later version.
-//
-// This library is distributed in the hope that it will be useful,
-// but WITHOUT ANY WARRANTY; without even the implied warranty of
-// MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the GNU
-// Lesser General Public License for more details.
+// This file has been put into the public domain.
+// You can do whatever you want with this file.
//
///////////////////////////////////////////////////////////////////////////////
diff --git a/Build/source/utils/xz-4.999.8beta/src/liblzma/common/index.c b/Build/source/utils/xz-4.999.9beta/src/liblzma/common/index.c
index 2478deab7e4..46d9ff6eb12 100644
--- a/Build/source/utils/xz-4.999.8beta/src/liblzma/common/index.c
+++ b/Build/source/utils/xz-4.999.9beta/src/liblzma/common/index.c
@@ -3,17 +3,10 @@
/// \file index.c
/// \brief Handling of Index
//
-// Copyright (C) 2007 Lasse Collin
+// Author: Lasse Collin
//
-// This library is free software; you can redistribute it and/or
-// modify it under the terms of the GNU Lesser General Public
-// License as published by the Free Software Foundation; either
-// version 2.1 of the License, or (at your option) any later version.
-//
-// This library is distributed in the hope that it will be useful,
-// but WITHOUT ANY WARRANTY; without even the implied warranty of
-// MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the GNU
-// Lesser General Public License for more details.
+// This file has been put into the public domain.
+// You can do whatever you want with this file.
//
///////////////////////////////////////////////////////////////////////////////
diff --git a/Build/source/utils/xz-4.999.8beta/src/liblzma/common/index.h b/Build/source/utils/xz-4.999.9beta/src/liblzma/common/index.h
index 79719dd7acc..9f177b1b3d4 100644
--- a/Build/source/utils/xz-4.999.8beta/src/liblzma/common/index.h
+++ b/Build/source/utils/xz-4.999.9beta/src/liblzma/common/index.h
@@ -3,17 +3,10 @@
/// \file index.h
/// \brief Handling of Index
//
-// Copyright (C) 2008 Lasse Collin
+// Author: Lasse Collin
//
-// This library is free software; you can redistribute it and/or
-// modify it under the terms of the GNU Lesser General Public
-// License as published by the Free Software Foundation; either
-// version 2.1 of the License, or (at your option) any later version.
-//
-// This library is distributed in the hope that it will be useful,
-// but WITHOUT ANY WARRANTY; without even the implied warranty of
-// MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the GNU
-// Lesser General Public License for more details.
+// This file has been put into the public domain.
+// You can do whatever you want with this file.
//
///////////////////////////////////////////////////////////////////////////////
diff --git a/Build/source/utils/xz-4.999.8beta/src/liblzma/common/index_decoder.c b/Build/source/utils/xz-4.999.9beta/src/liblzma/common/index_decoder.c
index f7cb8e4fa80..51e9de38ed9 100644
--- a/Build/source/utils/xz-4.999.8beta/src/liblzma/common/index_decoder.c
+++ b/Build/source/utils/xz-4.999.9beta/src/liblzma/common/index_decoder.c
@@ -3,17 +3,10 @@
/// \file index_decoder.c
/// \brief Decodes the Index field
//
-// Copyright (C) 2008 Lasse Collin
+// Author: Lasse Collin
//
-// This library is free software; you can redistribute it and/or
-// modify it under the terms of the GNU Lesser General Public
-// License as published by the Free Software Foundation; either
-// version 2.1 of the License, or (at your option) any later version.
-//
-// This library is distributed in the hope that it will be useful,
-// but WITHOUT ANY WARRANTY; without even the implied warranty of
-// MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the GNU
-// Lesser General Public License for more details.
+// This file has been put into the public domain.
+// You can do whatever you want with this file.
//
///////////////////////////////////////////////////////////////////////////////
@@ -250,7 +243,7 @@ static lzma_ret
index_decoder_init(lzma_next_coder *next, lzma_allocator *allocator,
lzma_index **i, uint64_t memlimit)
{
- lzma_next_coder_init(index_decoder_init, next, allocator);
+ lzma_next_coder_init(&index_decoder_init, next, allocator);
if (i == NULL || memlimit == 0)
return LZMA_PROG_ERROR;
diff --git a/Build/source/utils/xz-4.999.8beta/src/liblzma/common/index_encoder.c b/Build/source/utils/xz-4.999.9beta/src/liblzma/common/index_encoder.c
index 52910f08353..e23963ce42a 100644
--- a/Build/source/utils/xz-4.999.8beta/src/liblzma/common/index_encoder.c
+++ b/Build/source/utils/xz-4.999.9beta/src/liblzma/common/index_encoder.c
@@ -3,17 +3,10 @@
/// \file index_encoder.c
/// \brief Encodes the Index field
//
-// Copyright (C) 2008 Lasse Collin
+// Author: Lasse Collin
//
-// This library is free software; you can redistribute it and/or
-// modify it under the terms of the GNU Lesser General Public
-// License as published by the Free Software Foundation; either
-// version 2.1 of the License, or (at your option) any later version.
-//
-// This library is distributed in the hope that it will be useful,
-// but WITHOUT ANY WARRANTY; without even the implied warranty of
-// MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the GNU
-// Lesser General Public License for more details.
+// This file has been put into the public domain.
+// You can do whatever you want with this file.
//
///////////////////////////////////////////////////////////////////////////////
@@ -196,7 +189,7 @@ extern lzma_ret
lzma_index_encoder_init(lzma_next_coder *next, lzma_allocator *allocator,
lzma_index *i)
{
- lzma_next_coder_init(lzma_index_encoder_init, next, allocator);
+ lzma_next_coder_init(&lzma_index_encoder_init, next, allocator);
if (i == NULL)
return LZMA_PROG_ERROR;
diff --git a/Build/source/utils/xz-4.999.9beta/src/liblzma/common/index_encoder.h b/Build/source/utils/xz-4.999.9beta/src/liblzma/common/index_encoder.h
new file mode 100644
index 00000000000..c85d1c87ab3
--- /dev/null
+++ b/Build/source/utils/xz-4.999.9beta/src/liblzma/common/index_encoder.h
@@ -0,0 +1,23 @@
+///////////////////////////////////////////////////////////////////////////////
+//
+/// \file index_encoder.h
+/// \brief Encodes the Index field
+//
+// Author: Lasse Collin
+//
+// This file has been put into the public domain.
+// You can do whatever you want with this file.
+//
+///////////////////////////////////////////////////////////////////////////////
+
+#ifndef LZMA_INDEX_ENCODER_H
+#define LZMA_INDEX_ENCODER_H
+
+#include "common.h"
+
+
+extern lzma_ret lzma_index_encoder_init(lzma_next_coder *next,
+ lzma_allocator *allocator, lzma_index *i);
+
+
+#endif
diff --git a/Build/source/utils/xz-4.999.8beta/src/liblzma/common/index_hash.c b/Build/source/utils/xz-4.999.9beta/src/liblzma/common/index_hash.c
index 6371caa9d0f..e3e9386ae8e 100644
--- a/Build/source/utils/xz-4.999.8beta/src/liblzma/common/index_hash.c
+++ b/Build/source/utils/xz-4.999.9beta/src/liblzma/common/index_hash.c
@@ -3,17 +3,10 @@
/// \file index_hash.c
/// \brief Validates Index by using a hash function
//
-// Copyright (C) 2008 Lasse Collin
+// Author: Lasse Collin
//
-// This library is free software; you can redistribute it and/or
-// modify it under the terms of the GNU Lesser General Public
-// License as published by the Free Software Foundation; either
-// version 2.1 of the License, or (at your option) any later version.
-//
-// This library is distributed in the hope that it will be useful,
-// but WITHOUT ANY WARRANTY; without even the implied warranty of
-// MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the GNU
-// Lesser General Public License for more details.
+// This file has been put into the public domain.
+// You can do whatever you want with this file.
//
///////////////////////////////////////////////////////////////////////////////
diff --git a/Build/source/utils/xz-4.999.8beta/src/liblzma/common/stream_buffer_decoder.c b/Build/source/utils/xz-4.999.9beta/src/liblzma/common/stream_buffer_decoder.c
index 937534ce651..ae753155180 100644
--- a/Build/source/utils/xz-4.999.8beta/src/liblzma/common/stream_buffer_decoder.c
+++ b/Build/source/utils/xz-4.999.9beta/src/liblzma/common/stream_buffer_decoder.c
@@ -3,17 +3,10 @@
/// \file stream_buffer_decoder.c
/// \brief Single-call .xz Stream decoder
//
-// Copyright (C) 2009 Lasse Collin
+// Author: Lasse Collin
//
-// This library is free software; you can redistribute it and/or
-// modify it under the terms of the GNU Lesser General Public
-// License as published by the Free Software Foundation; either
-// version 2.1 of the License, or (at your option) any later version.
-//
-// This library is distributed in the hope that it will be useful,
-// but WITHOUT ANY WARRANTY; without even the implied warranty of
-// MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the GNU
-// Lesser General Public License for more details.
+// This file has been put into the public domain.
+// You can do whatever you want with this file.
//
///////////////////////////////////////////////////////////////////////////////
diff --git a/Build/source/utils/xz-4.999.8beta/src/liblzma/common/stream_buffer_encoder.c b/Build/source/utils/xz-4.999.9beta/src/liblzma/common/stream_buffer_encoder.c
index 3ecc694a969..dd94c22add3 100644
--- a/Build/source/utils/xz-4.999.8beta/src/liblzma/common/stream_buffer_encoder.c
+++ b/Build/source/utils/xz-4.999.9beta/src/liblzma/common/stream_buffer_encoder.c
@@ -3,17 +3,10 @@
/// \file stream_buffer_encoder.c
/// \brief Single-call .xz Stream encoder
//
-// Copyright (C) 2009 Lasse Collin
+// Author: Lasse Collin
//
-// This library is free software; you can redistribute it and/or
-// modify it under the terms of the GNU Lesser General Public
-// License as published by the Free Software Foundation; either
-// version 2.1 of the License, or (at your option) any later version.
-//
-// This library is distributed in the hope that it will be useful,
-// but WITHOUT ANY WARRANTY; without even the implied warranty of
-// MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the GNU
-// Lesser General Public License for more details.
+// This file has been put into the public domain.
+// You can do whatever you want with this file.
//
///////////////////////////////////////////////////////////////////////////////
diff --git a/Build/source/utils/xz-4.999.8beta/src/liblzma/common/stream_decoder.c b/Build/source/utils/xz-4.999.9beta/src/liblzma/common/stream_decoder.c
index 796a7fd4f8c..dcc047d9673 100644
--- a/Build/source/utils/xz-4.999.8beta/src/liblzma/common/stream_decoder.c
+++ b/Build/source/utils/xz-4.999.9beta/src/liblzma/common/stream_decoder.c
@@ -3,17 +3,10 @@
/// \file stream_decoder.c
/// \brief Decodes .xz Streams
//
-// Copyright (C) 2007 Lasse Collin
+// Author: Lasse Collin
//
-// This library is free software; you can redistribute it and/or
-// modify it under the terms of the GNU Lesser General Public
-// License as published by the Free Software Foundation; either
-// version 2.1 of the License, or (at your option) any later version.
-//
-// This library is distributed in the hope that it will be useful,
-// but WITHOUT ANY WARRANTY; without even the implied warranty of
-// MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the GNU
-// Lesser General Public License for more details.
+// This file has been put into the public domain.
+// You can do whatever you want with this file.
//
///////////////////////////////////////////////////////////////////////////////
@@ -405,7 +398,7 @@ extern lzma_ret
lzma_stream_decoder_init(lzma_next_coder *next, lzma_allocator *allocator,
uint64_t memlimit, uint32_t flags)
{
- lzma_next_coder_init(lzma_stream_decoder_init, next, allocator);
+ lzma_next_coder_init(&lzma_stream_decoder_init, next, allocator);
if (memlimit == 0)
return LZMA_PROG_ERROR;
diff --git a/Build/source/utils/xz-4.999.9beta/src/liblzma/common/stream_decoder.h b/Build/source/utils/xz-4.999.9beta/src/liblzma/common/stream_decoder.h
new file mode 100644
index 00000000000..e54ac28f44a
--- /dev/null
+++ b/Build/source/utils/xz-4.999.9beta/src/liblzma/common/stream_decoder.h
@@ -0,0 +1,21 @@
+///////////////////////////////////////////////////////////////////////////////
+//
+/// \file stream_decoder.h
+/// \brief Decodes .xz Streams
+//
+// Author: Lasse Collin
+//
+// This file has been put into the public domain.
+// You can do whatever you want with this file.
+//
+///////////////////////////////////////////////////////////////////////////////
+
+#ifndef LZMA_STREAM_DECODER_H
+#define LZMA_STREAM_DECODER_H
+
+#include "common.h"
+
+extern lzma_ret lzma_stream_decoder_init(lzma_next_coder *next,
+ lzma_allocator *allocator, uint64_t memlimit, uint32_t flags);
+
+#endif
diff --git a/Build/source/utils/xz-4.999.8beta/src/liblzma/common/stream_encoder.c b/Build/source/utils/xz-4.999.9beta/src/liblzma/common/stream_encoder.c
index 89fc2f9dc7a..292efc8248b 100644
--- a/Build/source/utils/xz-4.999.8beta/src/liblzma/common/stream_encoder.c
+++ b/Build/source/utils/xz-4.999.9beta/src/liblzma/common/stream_encoder.c
@@ -3,17 +3,10 @@
/// \file stream_encoder.c
/// \brief Encodes .xz Streams
//
-// Copyright (C) 2007-2008 Lasse Collin
+// Author: Lasse Collin
//
-// This library is free software; you can redistribute it and/or
-// modify it under the terms of the GNU Lesser General Public
-// License as published by the Free Software Foundation; either
-// version 2.1 of the License, or (at your option) any later version.
-//
-// This library is distributed in the hope that it will be useful,
-// but WITHOUT ANY WARRANTY; without even the implied warranty of
-// MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the GNU
-// Lesser General Public License for more details.
+// This file has been put into the public domain.
+// You can do whatever you want with this file.
//
///////////////////////////////////////////////////////////////////////////////
@@ -218,7 +211,7 @@ extern lzma_ret
lzma_stream_encoder_init(lzma_next_coder *next, lzma_allocator *allocator,
const lzma_filter *filters, lzma_check check)
{
- lzma_next_coder_init(lzma_stream_encoder_init, next, allocator);
+ lzma_next_coder_init(&lzma_stream_encoder_init, next, allocator);
if (filters == NULL)
return LZMA_PROG_ERROR;
diff --git a/Build/source/utils/xz-4.999.9beta/src/liblzma/common/stream_encoder.h b/Build/source/utils/xz-4.999.9beta/src/liblzma/common/stream_encoder.h
new file mode 100644
index 00000000000..46a7aed72ea
--- /dev/null
+++ b/Build/source/utils/xz-4.999.9beta/src/liblzma/common/stream_encoder.h
@@ -0,0 +1,23 @@
+///////////////////////////////////////////////////////////////////////////////
+//
+/// \file stream_encoder.h
+/// \brief Encodes .xz Streams
+//
+// Author: Lasse Collin
+//
+// This file has been put into the public domain.
+// You can do whatever you want with this file.
+//
+///////////////////////////////////////////////////////////////////////////////
+
+#ifndef LZMA_STREAM_ENCODER_H
+#define LZMA_STREAM_ENCODER_H
+
+#include "common.h"
+
+
+extern lzma_ret lzma_stream_encoder_init(
+ lzma_next_coder *next, lzma_allocator *allocator,
+ const lzma_filter *filters, lzma_check check);
+
+#endif
diff --git a/Build/source/utils/xz-4.999.8beta/src/liblzma/common/stream_flags_common.c b/Build/source/utils/xz-4.999.9beta/src/liblzma/common/stream_flags_common.c
index 51dd981ca19..fbe8eb8abda 100644
--- a/Build/source/utils/xz-4.999.8beta/src/liblzma/common/stream_flags_common.c
+++ b/Build/source/utils/xz-4.999.9beta/src/liblzma/common/stream_flags_common.c
@@ -3,17 +3,10 @@
/// \file stream_flags_common.c
/// \brief Common stuff for Stream flags coders
//
-// Copyright (C) 2007-2008 Lasse Collin
+// Author: Lasse Collin
//
-// This library is free software; you can redistribute it and/or
-// modify it under the terms of the GNU Lesser General Public
-// License as published by the Free Software Foundation; either
-// version 2.1 of the License, or (at your option) any later version.
-//
-// This library is distributed in the hope that it will be useful,
-// but WITHOUT ANY WARRANTY; without even the implied warranty of
-// MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the GNU
-// Lesser General Public License for more details.
+// This file has been put into the public domain.
+// You can do whatever you want with this file.
//
///////////////////////////////////////////////////////////////////////////////
diff --git a/Build/source/utils/xz-4.999.8beta/src/liblzma/common/stream_flags_common.h b/Build/source/utils/xz-4.999.9beta/src/liblzma/common/stream_flags_common.h
index f422b02ae2e..9f3122a3b1e 100644
--- a/Build/source/utils/xz-4.999.8beta/src/liblzma/common/stream_flags_common.h
+++ b/Build/source/utils/xz-4.999.9beta/src/liblzma/common/stream_flags_common.h
@@ -3,17 +3,10 @@
/// \file stream_flags_common.h
/// \brief Common stuff for Stream flags coders
//
-// Copyright (C) 2007 Lasse Collin
+// Author: Lasse Collin
//
-// This library is free software; you can redistribute it and/or
-// modify it under the terms of the GNU Lesser General Public
-// License as published by the Free Software Foundation; either
-// version 2.1 of the License, or (at your option) any later version.
-//
-// This library is distributed in the hope that it will be useful,
-// but WITHOUT ANY WARRANTY; without even the implied warranty of
-// MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the GNU
-// Lesser General Public License for more details.
+// This file has been put into the public domain.
+// You can do whatever you want with this file.
//
///////////////////////////////////////////////////////////////////////////////
diff --git a/Build/source/utils/xz-4.999.8beta/src/liblzma/common/stream_flags_decoder.c b/Build/source/utils/xz-4.999.9beta/src/liblzma/common/stream_flags_decoder.c
index 7c9aabf1f34..3dbbbcf4445 100644
--- a/Build/source/utils/xz-4.999.8beta/src/liblzma/common/stream_flags_decoder.c
+++ b/Build/source/utils/xz-4.999.9beta/src/liblzma/common/stream_flags_decoder.c
@@ -3,17 +3,10 @@
/// \file stream_flags_decoder.c
/// \brief Decodes Stream Header and Stream Footer from .xz files
//
-// Copyright (C) 2007 Lasse Collin
+// Author: Lasse Collin
//
-// This library is free software; you can redistribute it and/or
-// modify it under the terms of the GNU Lesser General Public
-// License as published by the Free Software Foundation; either
-// version 2.1 of the License, or (at your option) any later version.
-//
-// This library is distributed in the hope that it will be useful,
-// but WITHOUT ANY WARRANTY; without even the implied warranty of
-// MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the GNU
-// Lesser General Public License for more details.
+// This file has been put into the public domain.
+// You can do whatever you want with this file.
//
///////////////////////////////////////////////////////////////////////////////
diff --git a/Build/source/utils/xz-4.999.8beta/src/liblzma/common/stream_flags_encoder.c b/Build/source/utils/xz-4.999.9beta/src/liblzma/common/stream_flags_encoder.c
index 2dfaf92f203..ecbd0f13c31 100644
--- a/Build/source/utils/xz-4.999.8beta/src/liblzma/common/stream_flags_encoder.c
+++ b/Build/source/utils/xz-4.999.9beta/src/liblzma/common/stream_flags_encoder.c
@@ -3,17 +3,10 @@
/// \file stream_flags_encoder.c
/// \brief Encodes Stream Header and Stream Footer for .xz files
//
-// Copyright (C) 2007 Lasse Collin
+// Author: Lasse Collin
//
-// This library is free software; you can redistribute it and/or
-// modify it under the terms of the GNU Lesser General Public
-// License as published by the Free Software Foundation; either
-// version 2.1 of the License, or (at your option) any later version.
-//
-// This library is distributed in the hope that it will be useful,
-// but WITHOUT ANY WARRANTY; without even the implied warranty of
-// MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the GNU
-// Lesser General Public License for more details.
+// This file has been put into the public domain.
+// You can do whatever you want with this file.
//
///////////////////////////////////////////////////////////////////////////////
diff --git a/Build/source/utils/xz-4.999.8beta/src/liblzma/common/vli_decoder.c b/Build/source/utils/xz-4.999.9beta/src/liblzma/common/vli_decoder.c
index c2a4b1eb3f4..ffb27cadc53 100644
--- a/Build/source/utils/xz-4.999.8beta/src/liblzma/common/vli_decoder.c
+++ b/Build/source/utils/xz-4.999.9beta/src/liblzma/common/vli_decoder.c
@@ -3,17 +3,10 @@
/// \file vli_decoder.c
/// \brief Decodes variable-length integers
//
-// Copyright (C) 2007-2008 Lasse Collin
+// Author: Lasse Collin
//
-// This library is free software; you can redistribute it and/or
-// modify it under the terms of the GNU Lesser General Public
-// License as published by the Free Software Foundation; either
-// version 2.1 of the License, or (at your option) any later version.
-//
-// This library is distributed in the hope that it will be useful,
-// but WITHOUT ANY WARRANTY; without even the implied warranty of
-// MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the GNU
-// Lesser General Public License for more details.
+// This file has been put into the public domain.
+// You can do whatever you want with this file.
//
///////////////////////////////////////////////////////////////////////////////
diff --git a/Build/source/utils/xz-4.999.8beta/src/liblzma/common/vli_encoder.c b/Build/source/utils/xz-4.999.9beta/src/liblzma/common/vli_encoder.c
index f8215002d6d..ebc9f344acf 100644
--- a/Build/source/utils/xz-4.999.8beta/src/liblzma/common/vli_encoder.c
+++ b/Build/source/utils/xz-4.999.9beta/src/liblzma/common/vli_encoder.c
@@ -3,17 +3,10 @@
/// \file vli_encoder.c
/// \brief Encodes variable-length integers
//
-// Copyright (C) 2007-2008 Lasse Collin
+// Author: Lasse Collin
//
-// This library is free software; you can redistribute it and/or
-// modify it under the terms of the GNU Lesser General Public
-// License as published by the Free Software Foundation; either
-// version 2.1 of the License, or (at your option) any later version.
-//
-// This library is distributed in the hope that it will be useful,
-// but WITHOUT ANY WARRANTY; without even the implied warranty of
-// MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the GNU
-// Lesser General Public License for more details.
+// This file has been put into the public domain.
+// You can do whatever you want with this file.
//
///////////////////////////////////////////////////////////////////////////////
diff --git a/Build/source/utils/xz-4.999.9beta/src/liblzma/common/vli_size.c b/Build/source/utils/xz-4.999.9beta/src/liblzma/common/vli_size.c
new file mode 100644
index 00000000000..ec1b4fa488b
--- /dev/null
+++ b/Build/source/utils/xz-4.999.9beta/src/liblzma/common/vli_size.c
@@ -0,0 +1,30 @@
+///////////////////////////////////////////////////////////////////////////////
+//
+/// \file vli_size.c
+/// \brief Calculates the encoded size of a variable-length integer
+//
+// Author: Lasse Collin
+//
+// This file has been put into the public domain.
+// You can do whatever you want with this file.
+//
+///////////////////////////////////////////////////////////////////////////////
+
+#include "common.h"
+
+
+extern LZMA_API(uint32_t)
+lzma_vli_size(lzma_vli vli)
+{
+ if (vli > LZMA_VLI_MAX)
+ return 0;
+
+ uint32_t i = 0;
+ do {
+ vli >>= 7;
+ ++i;
+ } while (vli != 0);
+
+ assert(i <= LZMA_VLI_BYTES_MAX);
+ return i;
+}
diff --git a/Build/source/utils/xz-4.999.9beta/src/liblzma/delta/Makefile.inc b/Build/source/utils/xz-4.999.9beta/src/liblzma/delta/Makefile.inc
new file mode 100644
index 00000000000..c7739b44223
--- /dev/null
+++ b/Build/source/utils/xz-4.999.9beta/src/liblzma/delta/Makefile.inc
@@ -0,0 +1,23 @@
+##
+## Author: Lasse Collin
+##
+## This file has been put into the public domain.
+## You can do whatever you want with this file.
+##
+
+liblzma_la_SOURCES += \
+ delta/delta_common.c \
+ delta/delta_common.h \
+ delta/delta_private.h
+
+if COND_ENCODER_DELTA
+liblzma_la_SOURCES += \
+ delta/delta_encoder.c \
+ delta/delta_encoder.h
+endif
+
+if COND_DECODER_DELTA
+liblzma_la_SOURCES += \
+ delta/delta_decoder.c \
+ delta/delta_decoder.h
+endif
diff --git a/Build/source/utils/xz-4.999.8beta/src/liblzma/delta/delta_common.c b/Build/source/utils/xz-4.999.9beta/src/liblzma/delta/delta_common.c
index ee2abd65ac2..6d55ff6538e 100644
--- a/Build/source/utils/xz-4.999.8beta/src/liblzma/delta/delta_common.c
+++ b/Build/source/utils/xz-4.999.9beta/src/liblzma/delta/delta_common.c
@@ -3,17 +3,10 @@
/// \file delta_common.c
/// \brief Common stuff for Delta encoder and decoder
//
-// Copyright (C) 2007 Lasse Collin
+// Author: Lasse Collin
//
-// This library is free software; you can redistribute it and/or
-// modify it under the terms of the GNU Lesser General Public
-// License as published by the Free Software Foundation; either
-// version 2.1 of the License, or (at your option) any later version.
-//
-// This library is distributed in the hope that it will be useful,
-// but WITHOUT ANY WARRANTY; without even the implied warranty of
-// MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the GNU
-// Lesser General Public License for more details.
+// This file has been put into the public domain.
+// You can do whatever you want with this file.
//
///////////////////////////////////////////////////////////////////////////////
diff --git a/Build/source/utils/xz-4.999.9beta/src/liblzma/delta/delta_common.h b/Build/source/utils/xz-4.999.9beta/src/liblzma/delta/delta_common.h
new file mode 100644
index 00000000000..7e7e1baaf68
--- /dev/null
+++ b/Build/source/utils/xz-4.999.9beta/src/liblzma/delta/delta_common.h
@@ -0,0 +1,20 @@
+///////////////////////////////////////////////////////////////////////////////
+//
+/// \file delta_common.h
+/// \brief Common stuff for Delta encoder and decoder
+//
+// Author: Lasse Collin
+//
+// This file has been put into the public domain.
+// You can do whatever you want with this file.
+//
+///////////////////////////////////////////////////////////////////////////////
+
+#ifndef LZMA_DELTA_COMMON_H
+#define LZMA_DELTA_COMMON_H
+
+#include "common.h"
+
+extern uint64_t lzma_delta_coder_memusage(const void *options);
+
+#endif
diff --git a/Build/source/utils/xz-4.999.8beta/src/liblzma/delta/delta_decoder.c b/Build/source/utils/xz-4.999.9beta/src/liblzma/delta/delta_decoder.c
index 0211a38a24d..2ddf163d8d0 100644
--- a/Build/source/utils/xz-4.999.8beta/src/liblzma/delta/delta_decoder.c
+++ b/Build/source/utils/xz-4.999.9beta/src/liblzma/delta/delta_decoder.c
@@ -3,17 +3,10 @@
/// \file delta_decoder.c
/// \brief Delta filter decoder
//
-// Copyright (C) 2007, 2008 Lasse Collin
+// Author: Lasse Collin
//
-// This library is free software; you can redistribute it and/or
-// modify it under the terms of the GNU Lesser General Public
-// License as published by the Free Software Foundation; either
-// version 2.1 of the License, or (at your option) any later version.
-//
-// This library is distributed in the hope that it will be useful,
-// but WITHOUT ANY WARRANTY; without even the implied warranty of
-// MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the GNU
-// Lesser General Public License for more details.
+// This file has been put into the public domain.
+// You can do whatever you want with this file.
//
///////////////////////////////////////////////////////////////////////////////
diff --git a/Build/source/utils/xz-4.999.8beta/src/liblzma/delta/delta_decoder.h b/Build/source/utils/xz-4.999.9beta/src/liblzma/delta/delta_decoder.h
index 7a71feaea7b..ae89acc59f8 100644
--- a/Build/source/utils/xz-4.999.8beta/src/liblzma/delta/delta_decoder.h
+++ b/Build/source/utils/xz-4.999.9beta/src/liblzma/delta/delta_decoder.h
@@ -3,17 +3,10 @@
/// \file delta_decoder.h
/// \brief Delta filter decoder
//
-// Copyright (C) 2007 Lasse Collin
+// Author: Lasse Collin
//
-// This library is free software; you can redistribute it and/or
-// modify it under the terms of the GNU Lesser General Public
-// License as published by the Free Software Foundation; either
-// version 2.1 of the License, or (at your option) any later version.
-//
-// This library is distributed in the hope that it will be useful,
-// but WITHOUT ANY WARRANTY; without even the implied warranty of
-// MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the GNU
-// Lesser General Public License for more details.
+// This file has been put into the public domain.
+// You can do whatever you want with this file.
//
///////////////////////////////////////////////////////////////////////////////
diff --git a/Build/source/utils/xz-4.999.8beta/src/liblzma/delta/delta_encoder.c b/Build/source/utils/xz-4.999.9beta/src/liblzma/delta/delta_encoder.c
index 751aa92d9f9..0244673eae3 100644
--- a/Build/source/utils/xz-4.999.8beta/src/liblzma/delta/delta_encoder.c
+++ b/Build/source/utils/xz-4.999.9beta/src/liblzma/delta/delta_encoder.c
@@ -3,17 +3,10 @@
/// \file delta_encoder.c
/// \brief Delta filter encoder
//
-// Copyright (C) 2007, 2008 Lasse Collin
+// Author: Lasse Collin
//
-// This library is free software; you can redistribute it and/or
-// modify it under the terms of the GNU Lesser General Public
-// License as published by the Free Software Foundation; either
-// version 2.1 of the License, or (at your option) any later version.
-//
-// This library is distributed in the hope that it will be useful,
-// but WITHOUT ANY WARRANTY; without even the implied warranty of
-// MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the GNU
-// Lesser General Public License for more details.
+// This file has been put into the public domain.
+// You can do whatever you want with this file.
//
///////////////////////////////////////////////////////////////////////////////
diff --git a/Build/source/utils/xz-4.999.9beta/src/liblzma/delta/delta_encoder.h b/Build/source/utils/xz-4.999.9beta/src/liblzma/delta/delta_encoder.h
new file mode 100644
index 00000000000..a447862f205
--- /dev/null
+++ b/Build/source/utils/xz-4.999.9beta/src/liblzma/delta/delta_encoder.h
@@ -0,0 +1,23 @@
+///////////////////////////////////////////////////////////////////////////////
+//
+/// \file delta_encoder.h
+/// \brief Delta filter encoder
+//
+// Author: Lasse Collin
+//
+// This file has been put into the public domain.
+// You can do whatever you want with this file.
+//
+///////////////////////////////////////////////////////////////////////////////
+
+#ifndef LZMA_DELTA_ENCODER_H
+#define LZMA_DELTA_ENCODER_H
+
+#include "delta_common.h"
+
+extern lzma_ret lzma_delta_encoder_init(lzma_next_coder *next,
+ lzma_allocator *allocator, const lzma_filter_info *filters);
+
+extern lzma_ret lzma_delta_props_encode(const void *options, uint8_t *out);
+
+#endif
diff --git a/Build/source/utils/xz-4.999.8beta/src/liblzma/delta/delta_private.h b/Build/source/utils/xz-4.999.9beta/src/liblzma/delta/delta_private.h
index e1d593401e6..69be82e2f7d 100644
--- a/Build/source/utils/xz-4.999.8beta/src/liblzma/delta/delta_private.h
+++ b/Build/source/utils/xz-4.999.9beta/src/liblzma/delta/delta_private.h
@@ -3,17 +3,10 @@
/// \file delta_private.h
/// \brief Private common stuff for Delta encoder and decoder
//
-// Copyright (C) 2007 Lasse Collin
+// Author: Lasse Collin
//
-// This library is free software; you can redistribute it and/or
-// modify it under the terms of the GNU Lesser General Public
-// License as published by the Free Software Foundation; either
-// version 2.1 of the License, or (at your option) any later version.
-//
-// This library is distributed in the hope that it will be useful,
-// but WITHOUT ANY WARRANTY; without even the implied warranty of
-// MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the GNU
-// Lesser General Public License for more details.
+// This file has been put into the public domain.
+// You can do whatever you want with this file.
//
///////////////////////////////////////////////////////////////////////////////
diff --git a/Build/source/utils/xz-4.999.8beta/src/liblzma/liblzma.pc.in b/Build/source/utils/xz-4.999.9beta/src/liblzma/liblzma.pc.in
index e192352f1be..eb3f6c75d38 100644
--- a/Build/source/utils/xz-4.999.8beta/src/liblzma/liblzma.pc.in
+++ b/Build/source/utils/xz-4.999.9beta/src/liblzma/liblzma.pc.in
@@ -1,11 +1,18 @@
+#
+# Author: Lasse Collin
+#
+# This file has been put into the public domain.
+# You can do whatever you want with this file.
+#
+
prefix=@prefix@
exec_prefix=@exec_prefix@
libdir=@libdir@
includedir=@includedir@
Name: liblzma
-Description: General purporse data compression library
-URL: http://tukaani.org/xz/
+Description: General purpose data compression library
+URL: @PACKAGE_HOMEPAGE@
Version: @PACKAGE_VERSION@
Cflags: -I${includedir}
Libs: -L${libdir} -llzma
diff --git a/Build/source/utils/xz-4.999.9beta/src/liblzma/liblzma_w32res.rc b/Build/source/utils/xz-4.999.9beta/src/liblzma/liblzma_w32res.rc
new file mode 100644
index 00000000000..d4d8159c7b4
--- /dev/null
+++ b/Build/source/utils/xz-4.999.9beta/src/liblzma/liblzma_w32res.rc
@@ -0,0 +1,12 @@
+/*
+ * Author: Lasse Collin
+ *
+ * This file has been put into the public domain.
+ * You can do whatever you want with this file.
+ */
+
+#define MY_TYPE VFT_DLL
+#define MY_NAME "liblzma"
+#define MY_SUFFIX ".dll"
+#define MY_DESC "liblzma data compression library"
+#include "common_w32res.rc"
diff --git a/Build/source/utils/xz-4.999.9beta/src/liblzma/lz/Makefile.inc b/Build/source/utils/xz-4.999.9beta/src/liblzma/lz/Makefile.inc
new file mode 100644
index 00000000000..470d59c09d3
--- /dev/null
+++ b/Build/source/utils/xz-4.999.9beta/src/liblzma/lz/Makefile.inc
@@ -0,0 +1,21 @@
+##
+## Author: Lasse Collin
+##
+## This file has been put into the public domain.
+## You can do whatever you want with this file.
+##
+
+if COND_ENCODER_LZ
+liblzma_la_SOURCES += \
+ lz/lz_encoder.c \
+ lz/lz_encoder.h \
+ lz/lz_encoder_hash.h \
+ lz/lz_encoder_mf.c
+endif
+
+
+if COND_DECODER_LZ
+liblzma_la_SOURCES += \
+ lz/lz_decoder.c \
+ lz/lz_decoder.h
+endif
diff --git a/Build/source/utils/xz-4.999.8beta/src/liblzma/lz/lz_decoder.c b/Build/source/utils/xz-4.999.9beta/src/liblzma/lz/lz_decoder.c
index 99430c9f1ea..e91ad81c32a 100644
--- a/Build/source/utils/xz-4.999.8beta/src/liblzma/lz/lz_decoder.c
+++ b/Build/source/utils/xz-4.999.9beta/src/liblzma/lz/lz_decoder.c
@@ -2,19 +2,12 @@
//
/// \file lz_decoder.c
/// \brief LZ out window
+///
+// Authors: Igor Pavlov
+// Lasse Collin
//
-// Copyright (C) 1999-2006 Igor Pavlov
-// Copyright (C) 2007 Lasse Collin
-//
-// This library is free software; you can redistribute it and/or
-// modify it under the terms of the GNU Lesser General Public
-// License as published by the Free Software Foundation; either
-// version 2.1 of the License, or (at your option) any later version.
-//
-// This library is distributed in the hope that it will be useful,
-// but WITHOUT ANY WARRANTY; without even the implied warranty of
-// MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the GNU
-// Lesser General Public License for more details.
+// This file has been put into the public domain.
+// You can do whatever you want with this file.
//
///////////////////////////////////////////////////////////////////////////////
diff --git a/Build/source/utils/xz-4.999.8beta/src/liblzma/lz/lz_decoder.h b/Build/source/utils/xz-4.999.9beta/src/liblzma/lz/lz_decoder.h
index 9041d0bd06e..bf1609dbedf 100644
--- a/Build/source/utils/xz-4.999.8beta/src/liblzma/lz/lz_decoder.h
+++ b/Build/source/utils/xz-4.999.9beta/src/liblzma/lz/lz_decoder.h
@@ -2,19 +2,12 @@
//
/// \file lz_decoder.h
/// \brief LZ out window
+///
+// Authors: Igor Pavlov
+// Lasse Collin
//
-// Copyright (C) 1999-2006 Igor Pavlov
-// Copyright (C) 2007 Lasse Collin
-//
-// This library is free software; you can redistribute it and/or
-// modify it under the terms of the GNU Lesser General Public
-// License as published by the Free Software Foundation; either
-// version 2.1 of the License, or (at your option) any later version.
-//
-// This library is distributed in the hope that it will be useful,
-// but WITHOUT ANY WARRANTY; without even the implied warranty of
-// MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the GNU
-// Lesser General Public License for more details.
+// This file has been put into the public domain.
+// You can do whatever you want with this file.
//
///////////////////////////////////////////////////////////////////////////////
@@ -126,7 +119,7 @@ dict_is_empty(const lzma_dict *const dict)
static inline bool
dict_is_distance_valid(const lzma_dict *const dict, const size_t distance)
{
- return dict->full >= distance;
+ return dict->full > distance;
}
diff --git a/Build/source/utils/xz-4.999.8beta/src/liblzma/lz/lz_encoder.c b/Build/source/utils/xz-4.999.9beta/src/liblzma/lz/lz_encoder.c
index 22a37cd727a..5437546dd2b 100644
--- a/Build/source/utils/xz-4.999.8beta/src/liblzma/lz/lz_encoder.c
+++ b/Build/source/utils/xz-4.999.9beta/src/liblzma/lz/lz_encoder.c
@@ -2,24 +2,18 @@
//
/// \file lz_encoder.c
/// \brief LZ in window
+///
+// Authors: Igor Pavlov
+// Lasse Collin
//
-// Copyright (C) 1999-2008 Igor Pavlov
-// Copyright (C) 2007-2008 Lasse Collin
-//
-// This library is free software; you can redistribute it and/or
-// modify it under the terms of the GNU Lesser General Public
-// License as published by the Free Software Foundation; either
-// version 2.1 of the License, or (at your option) any later version.
-//
-// This library is distributed in the hope that it will be useful,
-// but WITHOUT ANY WARRANTY; without even the implied warranty of
-// MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the GNU
-// Lesser General Public License for more details.
+// This file has been put into the public domain.
+// You can do whatever you want with this file.
//
///////////////////////////////////////////////////////////////////////////////
#include "lz_encoder.h"
#include "lz_encoder_hash.h"
+#include "check.h"
struct lzma_coder_s {
@@ -488,8 +482,7 @@ lzma_lz_encoder_init(lzma_next_coder *next, lzma_allocator *allocator,
{
#ifdef HAVE_SMALL
// We need that the CRC32 table has been initialized.
- // This is enough to do it.
- lzma_crc32(NULL, 0, 0);
+ lzma_crc32_init();
#endif
// Allocate and initialize the base data structure.
diff --git a/Build/source/utils/xz-4.999.8beta/src/liblzma/lz/lz_encoder.h b/Build/source/utils/xz-4.999.9beta/src/liblzma/lz/lz_encoder.h
index 44880d77269..35e9ebbfc4d 100644
--- a/Build/source/utils/xz-4.999.8beta/src/liblzma/lz/lz_encoder.h
+++ b/Build/source/utils/xz-4.999.9beta/src/liblzma/lz/lz_encoder.h
@@ -2,19 +2,12 @@
//
/// \file lz_encoder.h
/// \brief LZ in window and match finder API
+///
+// Authors: Igor Pavlov
+// Lasse Collin
//
-// Copyright (C) 1999-2008 Igor Pavlov
-// Copyright (C) 2008 Lasse Collin
-//
-// This library is free software; you can redistribute it and/or
-// modify it under the terms of the GNU Lesser General Public
-// License as published by the Free Software Foundation; either
-// version 2.1 of the License, or (at your option) any later version.
-//
-// This library is distributed in the hope that it will be useful,
-// but WITHOUT ANY WARRANTY; without even the implied warranty of
-// MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the GNU
-// Lesser General Public License for more details.
+// This file has been put into the public domain.
+// You can do whatever you want with this file.
//
///////////////////////////////////////////////////////////////////////////////
@@ -241,7 +234,7 @@ mf_avail(const lzma_mf *mf)
static inline uint32_t
mf_unencoded(const lzma_mf *mf)
{
- return mf->write_pos - mf->read_pos - mf->read_ahead;
+ return mf->write_pos - mf->read_pos + mf->read_ahead;
}
diff --git a/Build/source/utils/xz-4.999.8beta/src/liblzma/lz/lz_encoder_hash.h b/Build/source/utils/xz-4.999.9beta/src/liblzma/lz/lz_encoder_hash.h
index 0841c38f721..dd4b1f1906b 100644
--- a/Build/source/utils/xz-4.999.8beta/src/liblzma/lz/lz_encoder_hash.h
+++ b/Build/source/utils/xz-4.999.9beta/src/liblzma/lz/lz_encoder_hash.h
@@ -3,17 +3,10 @@
/// \file lz_encoder_hash.h
/// \brief Hash macros for match finders
//
-// Copyright (C) 1999-2008 Igor Pavlov
+// Author: Igor Pavlov
//
-// This library is free software; you can redistribute it and/or
-// modify it under the terms of the GNU Lesser General Public
-// License as published by the Free Software Foundation; either
-// version 2.1 of the License, or (at your option) any later version.
-//
-// This library is distributed in the hope that it will be useful,
-// but WITHOUT ANY WARRANTY; without even the implied warranty of
-// MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the GNU
-// Lesser General Public License for more details.
+// This file has been put into the public domain.
+// You can do whatever you want with this file.
//
///////////////////////////////////////////////////////////////////////////////
diff --git a/Build/source/utils/xz-4.999.8beta/src/liblzma/lz/lz_encoder_mf.c b/Build/source/utils/xz-4.999.9beta/src/liblzma/lz/lz_encoder_mf.c
index 9d50e91dd56..e48de4fee93 100644
--- a/Build/source/utils/xz-4.999.8beta/src/liblzma/lz/lz_encoder_mf.c
+++ b/Build/source/utils/xz-4.999.9beta/src/liblzma/lz/lz_encoder_mf.c
@@ -2,19 +2,12 @@
//
/// \file lz_encoder_mf.c
/// \brief Match finders
+///
+// Authors: Igor Pavlov
+// Lasse Collin
//
-// Copyright (C) 1999-2008 Igor Pavlov
-// Copyright (C) 2008 Lasse Collin
-//
-// This library is free software; you can redistribute it and/or
-// modify it under the terms of the GNU Lesser General Public
-// License as published by the Free Software Foundation; either
-// version 2.1 of the License, or (at your option) any later version.
-//
-// This library is distributed in the hope that it will be useful,
-// but WITHOUT ANY WARRANTY; without even the implied warranty of
-// MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the GNU
-// Lesser General Public License for more details.
+// This file has been put into the public domain.
+// You can do whatever you want with this file.
//
///////////////////////////////////////////////////////////////////////////////
diff --git a/Build/source/utils/xz-4.999.9beta/src/liblzma/lzma/Makefile.inc b/Build/source/utils/xz-4.999.9beta/src/liblzma/lzma/Makefile.inc
new file mode 100644
index 00000000000..7fc4d172096
--- /dev/null
+++ b/Build/source/utils/xz-4.999.9beta/src/liblzma/lzma/Makefile.inc
@@ -0,0 +1,43 @@
+##
+## Author: Lasse Collin
+##
+## This file has been put into the public domain.
+## You can do whatever you want with this file.
+##
+
+EXTRA_DIST += lzma/fastpos_tablegen.c
+
+liblzma_la_SOURCES += lzma/lzma_common.h
+
+if COND_ENCODER_LZMA1
+liblzma_la_SOURCES += \
+ lzma/fastpos.h \
+ lzma/lzma_encoder.h \
+ lzma/lzma_encoder.c \
+ lzma/lzma_encoder_presets.c \
+ lzma/lzma_encoder_private.h \
+ lzma/lzma_encoder_optimum_fast.c \
+ lzma/lzma_encoder_optimum_normal.c
+
+if !COND_SMALL
+liblzma_la_SOURCES += lzma/fastpos_table.c
+endif
+endif
+
+if COND_DECODER_LZMA1
+liblzma_la_SOURCES += \
+ lzma/lzma_decoder.c \
+ lzma/lzma_decoder.h
+endif
+
+if COND_ENCODER_LZMA2
+liblzma_la_SOURCES += \
+ lzma/lzma2_encoder.c \
+ lzma/lzma2_encoder.h
+endif
+
+if COND_DECODER_LZMA2
+liblzma_la_SOURCES += \
+ lzma/lzma2_decoder.c \
+ lzma/lzma2_decoder.h
+endif
diff --git a/Build/source/utils/xz-4.999.8beta/src/liblzma/lzma/fastpos.h b/Build/source/utils/xz-4.999.9beta/src/liblzma/lzma/fastpos.h
index 503be27544a..a95a00c4792 100644
--- a/Build/source/utils/xz-4.999.8beta/src/liblzma/lzma/fastpos.h
+++ b/Build/source/utils/xz-4.999.9beta/src/liblzma/lzma/fastpos.h
@@ -2,19 +2,12 @@
//
/// \file fastpos.h
/// \brief Kind of two-bit version of bit scan reverse
+///
+// Authors: Igor Pavlov
+// Lasse Collin
//
-// Copyright (C) 1999-2007 Igor Pavlov
-// Copyright (C) 2008 Lasse Collin
-//
-// This library is free software; you can redistribute it and/or
-// modify it under the terms of the GNU Lesser General Public
-// License as published by the Free Software Foundation; either
-// version 2.1 of the License, or (at your option) any later version.
-//
-// This library is distributed in the hope that it will be useful,
-// but WITHOUT ANY WARRANTY; without even the implied warranty of
-// MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the GNU
-// Lesser General Public License for more details.
+// This file has been put into the public domain.
+// You can do whatever you want with this file.
//
///////////////////////////////////////////////////////////////////////////////
diff --git a/Build/source/utils/xz-4.999.8beta/src/liblzma/lzma/fastpos_table.c b/Build/source/utils/xz-4.999.9beta/src/liblzma/lzma/fastpos_table.c
index 6a3ceac0e90..6a3ceac0e90 100644
--- a/Build/source/utils/xz-4.999.8beta/src/liblzma/lzma/fastpos_table.c
+++ b/Build/source/utils/xz-4.999.9beta/src/liblzma/lzma/fastpos_table.c
diff --git a/Build/source/utils/xz-4.999.8beta/src/liblzma/lzma/fastpos_tablegen.c b/Build/source/utils/xz-4.999.9beta/src/liblzma/lzma/fastpos_tablegen.c
index 90ab6c23adb..c97e6f411c2 100644
--- a/Build/source/utils/xz-4.999.8beta/src/liblzma/lzma/fastpos_tablegen.c
+++ b/Build/source/utils/xz-4.999.9beta/src/liblzma/lzma/fastpos_tablegen.c
@@ -2,19 +2,12 @@
//
/// \file fastpos_tablegen.c
/// \brief Generates the lzma_fastpos[] lookup table
+///
+// Authors: Igor Pavlov
+// Lasse Collin
//
-// Copyright (C) 1999-2007 Igor Pavlov
-// Copyright (C) 2008 Lasse Collin
-//
-// This library is free software; you can redistribute it and/or
-// modify it under the terms of the GNU Lesser General Public
-// License as published by the Free Software Foundation; either
-// version 2.1 of the License, or (at your option) any later version.
-//
-// This library is distributed in the hope that it will be useful,
-// but WITHOUT ANY WARRANTY; without even the implied warranty of
-// MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the GNU
-// Lesser General Public License for more details.
+// This file has been put into the public domain.
+// You can do whatever you want with this file.
//
///////////////////////////////////////////////////////////////////////////////
diff --git a/Build/source/utils/xz-4.999.8beta/src/liblzma/lzma/lzma2_decoder.c b/Build/source/utils/xz-4.999.9beta/src/liblzma/lzma/lzma2_decoder.c
index fe925a59024..b4c2f2d5ba7 100644
--- a/Build/source/utils/xz-4.999.8beta/src/liblzma/lzma/lzma2_decoder.c
+++ b/Build/source/utils/xz-4.999.9beta/src/liblzma/lzma/lzma2_decoder.c
@@ -2,19 +2,12 @@
//
/// \file lzma2_decoder.c
/// \brief LZMA2 decoder
+///
+// Authors: Igor Pavlov
+// Lasse Collin
//
-// Copyright (C) 1999-2008 Igor Pavlov
-// Copyright (C) 2008 Lasse Collin
-//
-// This library is free software; you can redistribute it and/or
-// modify it under the terms of the GNU Lesser General Public
-// License as published by the Free Software Foundation; either
-// version 2.1 of the License, or (at your option) any later version.
-//
-// This library is distributed in the hope that it will be useful,
-// but WITHOUT ANY WARRANTY; without even the implied warranty of
-// MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the GNU
-// Lesser General Public License for more details.
+// This file has been put into the public domain.
+// You can do whatever you want with this file.
//
///////////////////////////////////////////////////////////////////////////////
diff --git a/Build/source/utils/xz-4.999.8beta/src/liblzma/lzma/lzma2_decoder.h b/Build/source/utils/xz-4.999.9beta/src/liblzma/lzma/lzma2_decoder.h
index a7504863f67..fac4ac487b0 100644
--- a/Build/source/utils/xz-4.999.8beta/src/liblzma/lzma/lzma2_decoder.h
+++ b/Build/source/utils/xz-4.999.9beta/src/liblzma/lzma/lzma2_decoder.h
@@ -2,19 +2,12 @@
//
/// \file lzma2_decoder.h
/// \brief LZMA2 decoder
+///
+// Authors: Igor Pavlov
+// Lasse Collin
//
-// Copyright (C) 1999-2008 Igor Pavlov
-// Copyright (C) 2008 Lasse Collin
-//
-// This library is free software; you can redistribute it and/or
-// modify it under the terms of the GNU Lesser General Public
-// License as published by the Free Software Foundation; either
-// version 2.1 of the License, or (at your option) any later version.
-//
-// This library is distributed in the hope that it will be useful,
-// but WITHOUT ANY WARRANTY; without even the implied warranty of
-// MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the GNU
-// Lesser General Public License for more details.
+// This file has been put into the public domain.
+// You can do whatever you want with this file.
//
///////////////////////////////////////////////////////////////////////////////
diff --git a/Build/source/utils/xz-4.999.8beta/src/liblzma/lzma/lzma2_encoder.c b/Build/source/utils/xz-4.999.9beta/src/liblzma/lzma/lzma2_encoder.c
index cc676d5ea73..8db813685f6 100644
--- a/Build/source/utils/xz-4.999.8beta/src/liblzma/lzma/lzma2_encoder.c
+++ b/Build/source/utils/xz-4.999.9beta/src/liblzma/lzma/lzma2_encoder.c
@@ -2,19 +2,12 @@
//
/// \file lzma2_encoder.c
/// \brief LZMA2 encoder
+///
+// Authors: Igor Pavlov
+// Lasse Collin
//
-// Copyright (C) 1999-2008 Igor Pavlov
-// Copyright (C) 2008 Lasse Collin
-//
-// This library is free software; you can redistribute it and/or
-// modify it under the terms of the GNU Lesser General Public
-// License as published by the Free Software Foundation; either
-// version 2.1 of the License, or (at your option) any later version.
-//
-// This library is distributed in the hope that it will be useful,
-// but WITHOUT ANY WARRANTY; without even the implied warranty of
-// MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the GNU
-// Lesser General Public License for more details.
+// This file has been put into the public domain.
+// You can do whatever you want with this file.
//
///////////////////////////////////////////////////////////////////////////////
diff --git a/Build/source/utils/xz-4.999.8beta/src/liblzma/lzma/lzma2_encoder.h b/Build/source/utils/xz-4.999.9beta/src/liblzma/lzma/lzma2_encoder.h
index 7c86ad46b9d..ca19ef4691c 100644
--- a/Build/source/utils/xz-4.999.8beta/src/liblzma/lzma/lzma2_encoder.h
+++ b/Build/source/utils/xz-4.999.9beta/src/liblzma/lzma/lzma2_encoder.h
@@ -2,19 +2,12 @@
//
/// \file lzma2_encoder.h
/// \brief LZMA2 encoder
+///
+// Authors: Igor Pavlov
+// Lasse Collin
//
-// Copyright (C) 1999-2008 Igor Pavlov
-// Copyright (C) 2008 Lasse Collin
-//
-// This library is free software; you can redistribute it and/or
-// modify it under the terms of the GNU Lesser General Public
-// License as published by the Free Software Foundation; either
-// version 2.1 of the License, or (at your option) any later version.
-//
-// This library is distributed in the hope that it will be useful,
-// but WITHOUT ANY WARRANTY; without even the implied warranty of
-// MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the GNU
-// Lesser General Public License for more details.
+// This file has been put into the public domain.
+// You can do whatever you want with this file.
//
///////////////////////////////////////////////////////////////////////////////
diff --git a/Build/source/utils/xz-4.999.8beta/src/liblzma/lzma/lzma_common.h b/Build/source/utils/xz-4.999.9beta/src/liblzma/lzma/lzma_common.h
index 546bf89e96b..e31e285f9a5 100644
--- a/Build/source/utils/xz-4.999.8beta/src/liblzma/lzma/lzma_common.h
+++ b/Build/source/utils/xz-4.999.9beta/src/liblzma/lzma/lzma_common.h
@@ -2,19 +2,12 @@
//
/// \file lzma_common.h
/// \brief Private definitions common to LZMA encoder and decoder
+///
+// Authors: Igor Pavlov
+// Lasse Collin
//
-// Copyright (C) 1999-2006 Igor Pavlov
-// Copyright (C) 2007 Lasse Collin
-//
-// This library is free software; you can redistribute it and/or
-// modify it under the terms of the GNU Lesser General Public
-// License as published by the Free Software Foundation; either
-// version 2.1 of the License, or (at your option) any later version.
-//
-// This library is distributed in the hope that it will be useful,
-// but WITHOUT ANY WARRANTY; without even the implied warranty of
-// MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the GNU
-// Lesser General Public License for more details.
+// This file has been put into the public domain.
+// You can do whatever you want with this file.
//
///////////////////////////////////////////////////////////////////////////////
diff --git a/Build/source/utils/xz-4.999.8beta/src/liblzma/lzma/lzma_decoder.c b/Build/source/utils/xz-4.999.9beta/src/liblzma/lzma/lzma_decoder.c
index 80a9fd6c736..a013a62be7f 100644
--- a/Build/source/utils/xz-4.999.8beta/src/liblzma/lzma/lzma_decoder.c
+++ b/Build/source/utils/xz-4.999.9beta/src/liblzma/lzma/lzma_decoder.c
@@ -2,19 +2,12 @@
//
/// \file lzma_decoder.c
/// \brief LZMA decoder
+///
+// Authors: Igor Pavlov
+// Lasse Collin
//
-// Copyright (C) 1999-2006 Igor Pavlov
-// Copyright (C) 2007-2008 Lasse Collin
-//
-// This library is free software; you can redistribute it and/or
-// modify it under the terms of the GNU Lesser General Public
-// License as published by the Free Software Foundation; either
-// version 2.1 of the License, or (at your option) any later version.
-//
-// This library is distributed in the hope that it will be useful,
-// but WITHOUT ANY WARRANTY; without even the implied warranty of
-// MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the GNU
-// Lesser General Public License for more details.
+// This file has been put into the public domain.
+// You can do whatever you want with this file.
//
///////////////////////////////////////////////////////////////////////////////
diff --git a/Build/source/utils/xz-4.999.8beta/src/liblzma/lzma/lzma_decoder.h b/Build/source/utils/xz-4.999.9beta/src/liblzma/lzma/lzma_decoder.h
index 15844052a76..147208dc804 100644
--- a/Build/source/utils/xz-4.999.8beta/src/liblzma/lzma/lzma_decoder.h
+++ b/Build/source/utils/xz-4.999.9beta/src/liblzma/lzma/lzma_decoder.h
@@ -2,19 +2,12 @@
//
/// \file lzma_decoder.h
/// \brief LZMA decoder API
+///
+// Authors: Igor Pavlov
+// Lasse Collin
//
-// Copyright (C) 1999-2006 Igor Pavlov
-// Copyright (C) 2007 Lasse Collin
-//
-// This library is free software; you can redistribute it and/or
-// modify it under the terms of the GNU Lesser General Public
-// License as published by the Free Software Foundation; either
-// version 2.1 of the License, or (at your option) any later version.
-//
-// This library is distributed in the hope that it will be useful,
-// but WITHOUT ANY WARRANTY; without even the implied warranty of
-// MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the GNU
-// Lesser General Public License for more details.
+// This file has been put into the public domain.
+// You can do whatever you want with this file.
//
///////////////////////////////////////////////////////////////////////////////
diff --git a/Build/source/utils/xz-4.999.8beta/src/liblzma/lzma/lzma_encoder.c b/Build/source/utils/xz-4.999.9beta/src/liblzma/lzma/lzma_encoder.c
index 976ca5b56f2..bda194cddf2 100644
--- a/Build/source/utils/xz-4.999.8beta/src/liblzma/lzma/lzma_encoder.c
+++ b/Build/source/utils/xz-4.999.9beta/src/liblzma/lzma/lzma_encoder.c
@@ -2,19 +2,12 @@
//
/// \file lzma_encoder.c
/// \brief LZMA encoder
+///
+// Authors: Igor Pavlov
+// Lasse Collin
//
-// Copyright (C) 1999-2006 Igor Pavlov
-// Copyright (C) 2007 Lasse Collin
-//
-// This library is free software; you can redistribute it and/or
-// modify it under the terms of the GNU Lesser General Public
-// License as published by the Free Software Foundation; either
-// version 2.1 of the License, or (at your option) any later version.
-//
-// This library is distributed in the hope that it will be useful,
-// but WITHOUT ANY WARRANTY; without even the implied warranty of
-// MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the GNU
-// Lesser General Public License for more details.
+// This file has been put into the public domain.
+// You can do whatever you want with this file.
//
///////////////////////////////////////////////////////////////////////////////
diff --git a/Build/source/utils/xz-4.999.8beta/src/liblzma/lzma/lzma_encoder.h b/Build/source/utils/xz-4.999.9beta/src/liblzma/lzma/lzma_encoder.h
index dd69775704c..835e1f58330 100644
--- a/Build/source/utils/xz-4.999.8beta/src/liblzma/lzma/lzma_encoder.h
+++ b/Build/source/utils/xz-4.999.9beta/src/liblzma/lzma/lzma_encoder.h
@@ -2,19 +2,12 @@
//
/// \file lzma_encoder.h
/// \brief LZMA encoder API
+///
+// Authors: Igor Pavlov
+// Lasse Collin
//
-// Copyright (C) 1999-2006 Igor Pavlov
-// Copyright (C) 2007 Lasse Collin
-//
-// This library is free software; you can redistribute it and/or
-// modify it under the terms of the GNU Lesser General Public
-// License as published by the Free Software Foundation; either
-// version 2.1 of the License, or (at your option) any later version.
-//
-// This library is distributed in the hope that it will be useful,
-// but WITHOUT ANY WARRANTY; without even the implied warranty of
-// MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the GNU
-// Lesser General Public License for more details.
+// This file has been put into the public domain.
+// You can do whatever you want with this file.
//
///////////////////////////////////////////////////////////////////////////////
diff --git a/Build/source/utils/xz-4.999.8beta/src/liblzma/lzma/lzma_encoder_optimum_fast.c b/Build/source/utils/xz-4.999.9beta/src/liblzma/lzma/lzma_encoder_optimum_fast.c
index a13adbe4144..61aaf3b9b8d 100644
--- a/Build/source/utils/xz-4.999.8beta/src/liblzma/lzma/lzma_encoder_optimum_fast.c
+++ b/Build/source/utils/xz-4.999.9beta/src/liblzma/lzma/lzma_encoder_optimum_fast.c
@@ -2,17 +2,10 @@
//
/// \file lzma_encoder_optimum_fast.c
//
-// Copyright (C) 1999-2008 Igor Pavlov
+// Author: Igor Pavlov
//
-// This library is free software; you can redistribute it and/or
-// modify it under the terms of the GNU Lesser General Public
-// License as published by the Free Software Foundation; either
-// version 2.1 of the License, or (at your option) any later version.
-//
-// This library is distributed in the hope that it will be useful,
-// but WITHOUT ANY WARRANTY; without even the implied warranty of
-// MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the GNU
-// Lesser General Public License for more details.
+// This file has been put into the public domain.
+// You can do whatever you want with this file.
//
///////////////////////////////////////////////////////////////////////////////
diff --git a/Build/source/utils/xz-4.999.8beta/src/liblzma/lzma/lzma_encoder_optimum_normal.c b/Build/source/utils/xz-4.999.9beta/src/liblzma/lzma/lzma_encoder_optimum_normal.c
index 7071a433e9d..cb9a1b9dbc4 100644
--- a/Build/source/utils/xz-4.999.8beta/src/liblzma/lzma/lzma_encoder_optimum_normal.c
+++ b/Build/source/utils/xz-4.999.9beta/src/liblzma/lzma/lzma_encoder_optimum_normal.c
@@ -2,17 +2,10 @@
//
/// \file lzma_encoder_optimum_normal.c
//
-// Copyright (C) 1999-2008 Igor Pavlov
+// Author: Igor Pavlov
//
-// This library is free software; you can redistribute it and/or
-// modify it under the terms of the GNU Lesser General Public
-// License as published by the Free Software Foundation; either
-// version 2.1 of the License, or (at your option) any later version.
-//
-// This library is distributed in the hope that it will be useful,
-// but WITHOUT ANY WARRANTY; without even the implied warranty of
-// MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the GNU
-// Lesser General Public License for more details.
+// This file has been put into the public domain.
+// You can do whatever you want with this file.
//
///////////////////////////////////////////////////////////////////////////////
diff --git a/Build/source/utils/xz-4.999.8beta/src/liblzma/lzma/lzma_encoder_presets.c b/Build/source/utils/xz-4.999.9beta/src/liblzma/lzma/lzma_encoder_presets.c
index 2b01996f77b..68900a9bed4 100644
--- a/Build/source/utils/xz-4.999.8beta/src/liblzma/lzma/lzma_encoder_presets.c
+++ b/Build/source/utils/xz-4.999.9beta/src/liblzma/lzma/lzma_encoder_presets.c
@@ -3,17 +3,10 @@
/// \file lzma_encoder_presets.c
/// \brief Encoder presets
//
-// Copyright (C) 2007 Lasse Collin
+// Author: Lasse Collin
//
-// This library is free software; you can redistribute it and/or
-// modify it under the terms of the GNU Lesser General Public
-// License as published by the Free Software Foundation; either
-// version 2.1 of the License, or (at your option) any later version.
-//
-// This library is distributed in the hope that it will be useful,
-// but WITHOUT ANY WARRANTY; without even the implied warranty of
-// MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the GNU
-// Lesser General Public License for more details.
+// This file has been put into the public domain.
+// You can do whatever you want with this file.
//
///////////////////////////////////////////////////////////////////////////////
diff --git a/Build/source/utils/xz-4.999.8beta/src/liblzma/lzma/lzma_encoder_private.h b/Build/source/utils/xz-4.999.9beta/src/liblzma/lzma/lzma_encoder_private.h
index 7533bc79d7a..017f58bd984 100644
--- a/Build/source/utils/xz-4.999.8beta/src/liblzma/lzma/lzma_encoder_private.h
+++ b/Build/source/utils/xz-4.999.9beta/src/liblzma/lzma/lzma_encoder_private.h
@@ -2,19 +2,12 @@
//
/// \file lzma_encoder_private.h
/// \brief Private definitions for LZMA encoder
+///
+// Authors: Igor Pavlov
+// Lasse Collin
//
-// Copyright (C) 1999-2006 Igor Pavlov
-// Copyright (C) 2007 Lasse Collin
-//
-// This library is free software; you can redistribute it and/or
-// modify it under the terms of the GNU Lesser General Public
-// License as published by the Free Software Foundation; either
-// version 2.1 of the License, or (at your option) any later version.
-//
-// This library is distributed in the hope that it will be useful,
-// but WITHOUT ANY WARRANTY; without even the implied warranty of
-// MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the GNU
-// Lesser General Public License for more details.
+// This file has been put into the public domain.
+// You can do whatever you want with this file.
//
///////////////////////////////////////////////////////////////////////////////
diff --git a/Build/source/utils/xz-4.999.9beta/src/liblzma/rangecoder/Makefile.inc b/Build/source/utils/xz-4.999.9beta/src/liblzma/rangecoder/Makefile.inc
new file mode 100644
index 00000000000..d8a597a2607
--- /dev/null
+++ b/Build/source/utils/xz-4.999.9beta/src/liblzma/rangecoder/Makefile.inc
@@ -0,0 +1,21 @@
+##
+## Author: Lasse Collin
+##
+## This file has been put into the public domain.
+## You can do whatever you want with this file.
+##
+
+EXTRA_DIST += rangecoder/price_tablegen.c
+
+liblzma_la_SOURCES += rangecoder/range_common.h
+
+if COND_ENCODER_LZMA1
+liblzma_la_SOURCES += \
+ rangecoder/range_encoder.h \
+ rangecoder/price.h \
+ rangecoder/price_table.c
+endif
+
+if COND_DECODER_LZMA1
+liblzma_la_SOURCES += rangecoder/range_decoder.h
+endif
diff --git a/Build/source/utils/xz-4.999.8beta/src/liblzma/rangecoder/price.h b/Build/source/utils/xz-4.999.9beta/src/liblzma/rangecoder/price.h
index e336885c3e2..8ae02ca7474 100644
--- a/Build/source/utils/xz-4.999.8beta/src/liblzma/rangecoder/price.h
+++ b/Build/source/utils/xz-4.999.9beta/src/liblzma/rangecoder/price.h
@@ -3,17 +3,10 @@
/// \file price.h
/// \brief Probability price calculation
//
-// Copyright (C) 1999-2008 Igor Pavlov
+// Author: Igor Pavlov
//
-// This library is free software; you can redistribute it and/or
-// modify it under the terms of the GNU Lesser General Public
-// License as published by the Free Software Foundation; either
-// version 2.1 of the License, or (at your option) any later version.
-//
-// This library is distributed in the hope that it will be useful,
-// but WITHOUT ANY WARRANTY; without even the implied warranty of
-// MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the GNU
-// Lesser General Public License for more details.
+// This file has been put into the public domain.
+// You can do whatever you want with this file.
//
///////////////////////////////////////////////////////////////////////////////
diff --git a/Build/source/utils/xz-4.999.8beta/src/liblzma/rangecoder/price_table.c b/Build/source/utils/xz-4.999.9beta/src/liblzma/rangecoder/price_table.c
index ac64bf62c76..ac64bf62c76 100644
--- a/Build/source/utils/xz-4.999.8beta/src/liblzma/rangecoder/price_table.c
+++ b/Build/source/utils/xz-4.999.9beta/src/liblzma/rangecoder/price_table.c
diff --git a/Build/source/utils/xz-4.999.8beta/src/liblzma/rangecoder/price_tablegen.c b/Build/source/utils/xz-4.999.9beta/src/liblzma/rangecoder/price_tablegen.c
index 4895ac76c6f..bf08ce39d7e 100644
--- a/Build/source/utils/xz-4.999.8beta/src/liblzma/rangecoder/price_tablegen.c
+++ b/Build/source/utils/xz-4.999.9beta/src/liblzma/rangecoder/price_tablegen.c
@@ -4,18 +4,12 @@
/// \brief Probability price table generator
///
/// Compiling: gcc -std=c99 -o price_tablegen price_tablegen.c
+///
+// Authors: Igor Pavlov
+// Lasse Collin
//
-// Copyright (C) 2007 Lasse Collin
-//
-// This library is free software; you can redistribute it and/or
-// modify it under the terms of the GNU Lesser General Public
-// License as published by the Free Software Foundation; either
-// version 2.1 of the License, or (at your option) any later version.
-//
-// This library is distributed in the hope that it will be useful,
-// but WITHOUT ANY WARRANTY; without even the implied warranty of
-// MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the GNU
-// Lesser General Public License for more details.
+// This file has been put into the public domain.
+// You can do whatever you want with this file.
//
///////////////////////////////////////////////////////////////////////////////
diff --git a/Build/source/utils/xz-4.999.8beta/src/liblzma/rangecoder/range_common.h b/Build/source/utils/xz-4.999.9beta/src/liblzma/rangecoder/range_common.h
index 6e5b099442d..0e6424198d1 100644
--- a/Build/source/utils/xz-4.999.8beta/src/liblzma/rangecoder/range_common.h
+++ b/Build/source/utils/xz-4.999.9beta/src/liblzma/rangecoder/range_common.h
@@ -2,19 +2,12 @@
//
/// \file range_common.h
/// \brief Common things for range encoder and decoder
+///
+// Authors: Igor Pavlov
+// Lasse Collin
//
-// Copyright (C) 1999-2006 Igor Pavlov
-// Copyright (C) 2006 Lasse Collin
-//
-// This library is free software; you can redistribute it and/or
-// modify it under the terms of the GNU Lesser General Public
-// License as published by the Free Software Foundation; either
-// version 2.1 of the License, or (at your option) any later version.
-//
-// This library is distributed in the hope that it will be useful,
-// but WITHOUT ANY WARRANTY; without even the implied warranty of
-// MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the GNU
-// Lesser General Public License for more details.
+// This file has been put into the public domain.
+// You can do whatever you want with this file.
//
///////////////////////////////////////////////////////////////////////////////
diff --git a/Build/source/utils/xz-4.999.8beta/src/liblzma/rangecoder/range_decoder.h b/Build/source/utils/xz-4.999.9beta/src/liblzma/rangecoder/range_decoder.h
index ca2d392e6a6..fb96180fb39 100644
--- a/Build/source/utils/xz-4.999.8beta/src/liblzma/rangecoder/range_decoder.h
+++ b/Build/source/utils/xz-4.999.9beta/src/liblzma/rangecoder/range_decoder.h
@@ -2,19 +2,12 @@
//
/// \file range_decoder.h
/// \brief Range Decoder
+///
+// Authors: Igor Pavlov
+// Lasse Collin
//
-// Copyright (C) 1999-2006 Igor Pavlov
-// Copyright (C) 2007 Lasse Collin
-//
-// This library is free software; you can redistribute it and/or
-// modify it under the terms of the GNU Lesser General Public
-// License as published by the Free Software Foundation; either
-// version 2.1 of the License, or (at your option) any later version.
-//
-// This library is distributed in the hope that it will be useful,
-// but WITHOUT ANY WARRANTY; without even the implied warranty of
-// MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the GNU
-// Lesser General Public License for more details.
+// This file has been put into the public domain.
+// You can do whatever you want with this file.
//
///////////////////////////////////////////////////////////////////////////////
diff --git a/Build/source/utils/xz-4.999.8beta/src/liblzma/rangecoder/range_encoder.h b/Build/source/utils/xz-4.999.9beta/src/liblzma/rangecoder/range_encoder.h
index f66e955cc79..1e1c36995b6 100644
--- a/Build/source/utils/xz-4.999.8beta/src/liblzma/rangecoder/range_encoder.h
+++ b/Build/source/utils/xz-4.999.9beta/src/liblzma/rangecoder/range_encoder.h
@@ -2,19 +2,12 @@
//
/// \file range_encoder.h
/// \brief Range Encoder
+///
+// Authors: Igor Pavlov
+// Lasse Collin
//
-// Copyright (C) 1999-2006 Igor Pavlov
-// Copyright (C) 2007-2008 Lasse Collin
-//
-// This library is free software; you can redistribute it and/or
-// modify it under the terms of the GNU Lesser General Public
-// License as published by the Free Software Foundation; either
-// version 2.1 of the License, or (at your option) any later version.
-//
-// This library is distributed in the hope that it will be useful,
-// but WITHOUT ANY WARRANTY; without even the implied warranty of
-// MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the GNU
-// Lesser General Public License for more details.
+// This file has been put into the public domain.
+// You can do whatever you want with this file.
//
///////////////////////////////////////////////////////////////////////////////
diff --git a/Build/source/utils/xz-4.999.9beta/src/liblzma/simple/Makefile.inc b/Build/source/utils/xz-4.999.9beta/src/liblzma/simple/Makefile.inc
new file mode 100644
index 00000000000..8a5e2d7fa96
--- /dev/null
+++ b/Build/source/utils/xz-4.999.9beta/src/liblzma/simple/Makefile.inc
@@ -0,0 +1,47 @@
+##
+## Author: Lasse Collin
+##
+## This file has been put into the public domain.
+## You can do whatever you want with this file.
+##
+
+liblzma_la_SOURCES += \
+ simple/simple_coder.c \
+ simple/simple_coder.h \
+ simple/simple_private.h
+
+if COND_ENCODER_SIMPLE
+liblzma_la_SOURCES += \
+ simple/simple_encoder.c \
+ simple/simple_encoder.h
+endif
+
+if COND_DECODER_SIMPLE
+liblzma_la_SOURCES += \
+ simple/simple_decoder.c \
+ simple/simple_decoder.h
+endif
+
+if COND_FILTER_X86
+liblzma_la_SOURCES += simple/x86.c
+endif
+
+if COND_FILTER_POWERPC
+liblzma_la_SOURCES += simple/powerpc.c
+endif
+
+if COND_FILTER_IA64
+liblzma_la_SOURCES += simple/ia64.c
+endif
+
+if COND_FILTER_ARM
+liblzma_la_SOURCES += simple/arm.c
+endif
+
+if COND_FILTER_ARMTHUMB
+liblzma_la_SOURCES += simple/armthumb.c
+endif
+
+if COND_FILTER_SPARC
+liblzma_la_SOURCES += simple/sparc.c
+endif
diff --git a/Build/source/utils/xz-4.999.8beta/src/liblzma/simple/arm.c b/Build/source/utils/xz-4.999.9beta/src/liblzma/simple/arm.c
index 284371c3fd2..8fcf6437491 100644
--- a/Build/source/utils/xz-4.999.8beta/src/liblzma/simple/arm.c
+++ b/Build/source/utils/xz-4.999.9beta/src/liblzma/simple/arm.c
@@ -2,19 +2,12 @@
//
/// \file arm.c
/// \brief Filter for ARM binaries
+///
+// Authors: Igor Pavlov
+// Lasse Collin
//
-// Copyright (C) 1999-2006 Igor Pavlov
-// Copyright (C) 2007 Lasse Collin
-//
-// This library is free software; you can redistribute it and/or
-// modify it under the terms of the GNU Lesser General Public
-// License as published by the Free Software Foundation; either
-// version 2.1 of the License, or (at your option) any later version.
-//
-// This library is distributed in the hope that it will be useful,
-// but WITHOUT ANY WARRANTY; without even the implied warranty of
-// MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the GNU
-// Lesser General Public License for more details.
+// This file has been put into the public domain.
+// You can do whatever you want with this file.
//
///////////////////////////////////////////////////////////////////////////////
@@ -26,7 +19,7 @@ arm_code(lzma_simple *simple lzma_attribute((unused)),
uint32_t now_pos, bool is_encoder,
uint8_t *buffer, size_t size)
{
- uint32_t i;
+ size_t i;
for (i = 0; i + 4 <= size; i += 4) {
if (buffer[i + 3] == 0xEB) {
uint32_t src = (buffer[i + 2] << 16)
@@ -56,7 +49,7 @@ arm_coder_init(lzma_next_coder *next, lzma_allocator *allocator,
const lzma_filter_info *filters, bool is_encoder)
{
return lzma_simple_coder_init(next, allocator, filters,
- &arm_code, 0, 4, is_encoder);
+ &arm_code, 0, 4, 4, is_encoder);
}
diff --git a/Build/source/utils/xz-4.999.8beta/src/liblzma/simple/armthumb.c b/Build/source/utils/xz-4.999.9beta/src/liblzma/simple/armthumb.c
index 51ed2c433f0..eb6a69d1282 100644
--- a/Build/source/utils/xz-4.999.8beta/src/liblzma/simple/armthumb.c
+++ b/Build/source/utils/xz-4.999.9beta/src/liblzma/simple/armthumb.c
@@ -2,19 +2,12 @@
//
/// \file armthumb.c
/// \brief Filter for ARM-Thumb binaries
+///
+// Authors: Igor Pavlov
+// Lasse Collin
//
-// Copyright (C) 1999-2006 Igor Pavlov
-// Copyright (C) 2007 Lasse Collin
-//
-// This library is free software; you can redistribute it and/or
-// modify it under the terms of the GNU Lesser General Public
-// License as published by the Free Software Foundation; either
-// version 2.1 of the License, or (at your option) any later version.
-//
-// This library is distributed in the hope that it will be useful,
-// but WITHOUT ANY WARRANTY; without even the implied warranty of
-// MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the GNU
-// Lesser General Public License for more details.
+// This file has been put into the public domain.
+// You can do whatever you want with this file.
//
///////////////////////////////////////////////////////////////////////////////
@@ -26,7 +19,7 @@ armthumb_code(lzma_simple *simple lzma_attribute((unused)),
uint32_t now_pos, bool is_encoder,
uint8_t *buffer, size_t size)
{
- uint32_t i;
+ size_t i;
for (i = 0; i + 4 <= size; i += 2) {
if ((buffer[i + 1] & 0xF8) == 0xF0
&& (buffer[i + 3] & 0xF8) == 0xF8) {
@@ -61,7 +54,7 @@ armthumb_coder_init(lzma_next_coder *next, lzma_allocator *allocator,
const lzma_filter_info *filters, bool is_encoder)
{
return lzma_simple_coder_init(next, allocator, filters,
- &armthumb_code, 0, 4, is_encoder);
+ &armthumb_code, 0, 4, 2, is_encoder);
}
diff --git a/Build/source/utils/xz-4.999.8beta/src/liblzma/simple/ia64.c b/Build/source/utils/xz-4.999.9beta/src/liblzma/simple/ia64.c
index e29e5ad61c2..fd263d4aea0 100644
--- a/Build/source/utils/xz-4.999.8beta/src/liblzma/simple/ia64.c
+++ b/Build/source/utils/xz-4.999.9beta/src/liblzma/simple/ia64.c
@@ -2,19 +2,12 @@
//
/// \file ia64.c
/// \brief Filter for IA64 (Itanium) binaries
+///
+// Authors: Igor Pavlov
+// Lasse Collin
//
-// Copyright (C) 1999-2006 Igor Pavlov
-// Copyright (C) 2007 Lasse Collin
-//
-// This library is free software; you can redistribute it and/or
-// modify it under the terms of the GNU Lesser General Public
-// License as published by the Free Software Foundation; either
-// version 2.1 of the License, or (at your option) any later version.
-//
-// This library is distributed in the hope that it will be useful,
-// but WITHOUT ANY WARRANTY; without even the implied warranty of
-// MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the GNU
-// Lesser General Public License for more details.
+// This file has been put into the public domain.
+// You can do whatever you want with this file.
//
///////////////////////////////////////////////////////////////////////////////
@@ -97,7 +90,7 @@ ia64_coder_init(lzma_next_coder *next, lzma_allocator *allocator,
const lzma_filter_info *filters, bool is_encoder)
{
return lzma_simple_coder_init(next, allocator, filters,
- &ia64_code, 0, 16, is_encoder);
+ &ia64_code, 0, 16, 16, is_encoder);
}
diff --git a/Build/source/utils/xz-4.999.8beta/src/liblzma/simple/powerpc.c b/Build/source/utils/xz-4.999.9beta/src/liblzma/simple/powerpc.c
index a3089fca9c1..aaa14f22197 100644
--- a/Build/source/utils/xz-4.999.8beta/src/liblzma/simple/powerpc.c
+++ b/Build/source/utils/xz-4.999.9beta/src/liblzma/simple/powerpc.c
@@ -2,19 +2,12 @@
//
/// \file powerpc.c
/// \brief Filter for PowerPC (big endian) binaries
+///
+// Authors: Igor Pavlov
+// Lasse Collin
//
-// Copyright (C) 1999-2006 Igor Pavlov
-// Copyright (C) 2007 Lasse Collin
-//
-// This library is free software; you can redistribute it and/or
-// modify it under the terms of the GNU Lesser General Public
-// License as published by the Free Software Foundation; either
-// version 2.1 of the License, or (at your option) any later version.
-//
-// This library is distributed in the hope that it will be useful,
-// but WITHOUT ANY WARRANTY; without even the implied warranty of
-// MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the GNU
-// Lesser General Public License for more details.
+// This file has been put into the public domain.
+// You can do whatever you want with this file.
//
///////////////////////////////////////////////////////////////////////////////
@@ -60,7 +53,7 @@ powerpc_coder_init(lzma_next_coder *next, lzma_allocator *allocator,
const lzma_filter_info *filters, bool is_encoder)
{
return lzma_simple_coder_init(next, allocator, filters,
- &powerpc_code, 0, 4, is_encoder);
+ &powerpc_code, 0, 4, 4, is_encoder);
}
diff --git a/Build/source/utils/xz-4.999.8beta/src/liblzma/simple/simple_coder.c b/Build/source/utils/xz-4.999.9beta/src/liblzma/simple/simple_coder.c
index 555fcce8e76..497949a3d09 100644
--- a/Build/source/utils/xz-4.999.8beta/src/liblzma/simple/simple_coder.c
+++ b/Build/source/utils/xz-4.999.9beta/src/liblzma/simple/simple_coder.c
@@ -6,17 +6,10 @@
/// Simple filters don't change the size of the data i.e. number of bytes
/// in equals the number of bytes out.
//
-// Copyright (C) 2007 Lasse Collin
+// Author: Lasse Collin
//
-// This library is free software; you can redistribute it and/or
-// modify it under the terms of the GNU Lesser General Public
-// License as published by the Free Software Foundation; either
-// version 2.1 of the License, or (at your option) any later version.
-//
-// This library is distributed in the hope that it will be useful,
-// but WITHOUT ANY WARRANTY; without even the implied warranty of
-// MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the GNU
-// Lesser General Public License for more details.
+// This file has been put into the public domain.
+// You can do whatever you want with this file.
//
///////////////////////////////////////////////////////////////////////////////
@@ -222,7 +215,8 @@ lzma_simple_coder_init(lzma_next_coder *next, lzma_allocator *allocator,
const lzma_filter_info *filters,
size_t (*filter)(lzma_simple *simple, uint32_t now_pos,
bool is_encoder, uint8_t *buffer, size_t size),
- size_t simple_size, size_t unfiltered_max, bool is_encoder)
+ size_t simple_size, size_t unfiltered_max,
+ uint32_t alignment, bool is_encoder)
{
// Allocate memory for the lzma_coder structure if needed.
if (next->coder == NULL) {
@@ -256,6 +250,8 @@ lzma_simple_coder_init(lzma_next_coder *next, lzma_allocator *allocator,
if (filters[0].options != NULL) {
const lzma_options_bcj *simple = filters[0].options;
next->coder->now_pos = simple->start_offset;
+ if (next->coder->now_pos & (alignment - 1))
+ return LZMA_OPTIONS_ERROR;
} else {
next->coder->now_pos = 0;
}
diff --git a/Build/source/utils/xz-4.999.8beta/src/liblzma/simple/simple_coder.h b/Build/source/utils/xz-4.999.9beta/src/liblzma/simple/simple_coder.h
index b682f84f251..0952fad33b3 100644
--- a/Build/source/utils/xz-4.999.8beta/src/liblzma/simple/simple_coder.h
+++ b/Build/source/utils/xz-4.999.9beta/src/liblzma/simple/simple_coder.h
@@ -3,18 +3,10 @@
/// \file simple_coder.h
/// \brief Wrapper for simple filters
//
+// Author: Lasse Collin
//
-// Copyright (C) 2007 Lasse Collin
-//
-// This library is free software; you can redistribute it and/or
-// modify it under the terms of the GNU Lesser General Public
-// License as published by the Free Software Foundation; either
-// version 2.1 of the License, or (at your option) any later version.
-//
-// This library is distributed in the hope that it will be useful,
-// but WITHOUT ANY WARRANTY; without even the implied warranty of
-// MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the GNU
-// Lesser General Public License for more details.
+// This file has been put into the public domain.
+// You can do whatever you want with this file.
//
///////////////////////////////////////////////////////////////////////////////
diff --git a/Build/source/utils/xz-4.999.8beta/src/liblzma/simple/simple_decoder.c b/Build/source/utils/xz-4.999.9beta/src/liblzma/simple/simple_decoder.c
index d7c17e2fdf0..9be1bfef579 100644
--- a/Build/source/utils/xz-4.999.8beta/src/liblzma/simple/simple_decoder.c
+++ b/Build/source/utils/xz-4.999.9beta/src/liblzma/simple/simple_decoder.c
@@ -3,17 +3,10 @@
/// \file simple_decoder.c
/// \brief Properties decoder for simple filters
//
-// Copyright (C) 2007-2008 Lasse Collin
+// Author: Lasse Collin
//
-// This library is free software; you can redistribute it and/or
-// modify it under the terms of the GNU Lesser General Public
-// License as published by the Free Software Foundation; either
-// version 2.1 of the License, or (at your option) any later version.
-//
-// This library is distributed in the hope that it will be useful,
-// but WITHOUT ANY WARRANTY; without even the implied warranty of
-// MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the GNU
-// Lesser General Public License for more details.
+// This file has been put into the public domain.
+// You can do whatever you want with this file.
//
///////////////////////////////////////////////////////////////////////////////
diff --git a/Build/source/utils/xz-4.999.9beta/src/liblzma/simple/simple_decoder.h b/Build/source/utils/xz-4.999.9beta/src/liblzma/simple/simple_decoder.h
new file mode 100644
index 00000000000..b8bf590f768
--- /dev/null
+++ b/Build/source/utils/xz-4.999.9beta/src/liblzma/simple/simple_decoder.h
@@ -0,0 +1,22 @@
+///////////////////////////////////////////////////////////////////////////////
+//
+/// \file simple_decoder.h
+/// \brief Properties decoder for simple filters
+//
+// Author: Lasse Collin
+//
+// This file has been put into the public domain.
+// You can do whatever you want with this file.
+//
+///////////////////////////////////////////////////////////////////////////////
+
+#ifndef LZMA_SIMPLE_DECODER_H
+#define LZMA_SIMPLE_DECODER_H
+
+#include "simple_coder.h"
+
+extern lzma_ret lzma_simple_props_decode(
+ void **options, lzma_allocator *allocator,
+ const uint8_t *props, size_t props_size);
+
+#endif
diff --git a/Build/source/utils/xz-4.999.8beta/src/liblzma/simple/simple_encoder.c b/Build/source/utils/xz-4.999.9beta/src/liblzma/simple/simple_encoder.c
index fe2f98d6cde..1ceabd1ff96 100644
--- a/Build/source/utils/xz-4.999.8beta/src/liblzma/simple/simple_encoder.c
+++ b/Build/source/utils/xz-4.999.9beta/src/liblzma/simple/simple_encoder.c
@@ -3,17 +3,10 @@
/// \file simple_encoder.c
/// \brief Properties encoder for simple filters
//
-// Copyright (C) 2007-2008 Lasse Collin
+// Author: Lasse Collin
//
-// This library is free software; you can redistribute it and/or
-// modify it under the terms of the GNU Lesser General Public
-// License as published by the Free Software Foundation; either
-// version 2.1 of the License, or (at your option) any later version.
-//
-// This library is distributed in the hope that it will be useful,
-// but WITHOUT ANY WARRANTY; without even the implied warranty of
-// MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the GNU
-// Lesser General Public License for more details.
+// This file has been put into the public domain.
+// You can do whatever you want with this file.
//
///////////////////////////////////////////////////////////////////////////////
diff --git a/Build/source/utils/xz-4.999.9beta/src/liblzma/simple/simple_encoder.h b/Build/source/utils/xz-4.999.9beta/src/liblzma/simple/simple_encoder.h
new file mode 100644
index 00000000000..1cee4823a4e
--- /dev/null
+++ b/Build/source/utils/xz-4.999.9beta/src/liblzma/simple/simple_encoder.h
@@ -0,0 +1,23 @@
+///////////////////////////////////////////////////////////////////////////////
+//
+/// \file simple_encoder.c
+/// \brief Properties encoder for simple filters
+//
+// Author: Lasse Collin
+//
+// This file has been put into the public domain.
+// You can do whatever you want with this file.
+//
+///////////////////////////////////////////////////////////////////////////////
+
+#ifndef LZMA_SIMPLE_ENCODER_H
+#define LZMA_SIMPLE_ENCODER_H
+
+#include "simple_coder.h"
+
+
+extern lzma_ret lzma_simple_props_size(uint32_t *size, const void *options);
+
+extern lzma_ret lzma_simple_props_encode(const void *options, uint8_t *out);
+
+#endif
diff --git a/Build/source/utils/xz-4.999.8beta/src/liblzma/simple/simple_private.h b/Build/source/utils/xz-4.999.9beta/src/liblzma/simple/simple_private.h
index 4e7a9db377e..a69f82785fb 100644
--- a/Build/source/utils/xz-4.999.8beta/src/liblzma/simple/simple_private.h
+++ b/Build/source/utils/xz-4.999.9beta/src/liblzma/simple/simple_private.h
@@ -3,17 +3,10 @@
/// \file simple_private.h
/// \brief Private definitions for so called simple filters
//
-// Copyright (C) 2007 Lasse Collin
+// Author: Lasse Collin
//
-// This library is free software; you can redistribute it and/or
-// modify it under the terms of the GNU Lesser General Public
-// License as published by the Free Software Foundation; either
-// version 2.1 of the License, or (at your option) any later version.
-//
-// This library is distributed in the hope that it will be useful,
-// but WITHOUT ANY WARRANTY; without even the implied warranty of
-// MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the GNU
-// Lesser General Public License for more details.
+// This file has been put into the public domain.
+// You can do whatever you want with this file.
//
///////////////////////////////////////////////////////////////////////////////
@@ -77,6 +70,7 @@ extern lzma_ret lzma_simple_coder_init(lzma_next_coder *next,
lzma_allocator *allocator, const lzma_filter_info *filters,
size_t (*filter)(lzma_simple *simple, uint32_t now_pos,
bool is_encoder, uint8_t *buffer, size_t size),
- size_t simple_size, size_t unfiltered_max, bool is_encoder);
+ size_t simple_size, size_t unfiltered_max,
+ uint32_t alignment, bool is_encoder);
#endif
diff --git a/Build/source/utils/xz-4.999.8beta/src/liblzma/simple/sparc.c b/Build/source/utils/xz-4.999.9beta/src/liblzma/simple/sparc.c
index 09bc67f15f5..808a59aaac7 100644
--- a/Build/source/utils/xz-4.999.8beta/src/liblzma/simple/sparc.c
+++ b/Build/source/utils/xz-4.999.9beta/src/liblzma/simple/sparc.c
@@ -2,19 +2,12 @@
//
/// \file sparc.c
/// \brief Filter for SPARC binaries
+///
+// Authors: Igor Pavlov
+// Lasse Collin
//
-// Copyright (C) 1999-2006 Igor Pavlov
-// Copyright (C) 2007 Lasse Collin
-//
-// This library is free software; you can redistribute it and/or
-// modify it under the terms of the GNU Lesser General Public
-// License as published by the Free Software Foundation; either
-// version 2.1 of the License, or (at your option) any later version.
-//
-// This library is distributed in the hope that it will be useful,
-// but WITHOUT ANY WARRANTY; without even the implied warranty of
-// MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the GNU
-// Lesser General Public License for more details.
+// This file has been put into the public domain.
+// You can do whatever you want with this file.
//
///////////////////////////////////////////////////////////////////////////////
@@ -68,7 +61,7 @@ sparc_coder_init(lzma_next_coder *next, lzma_allocator *allocator,
const lzma_filter_info *filters, bool is_encoder)
{
return lzma_simple_coder_init(next, allocator, filters,
- &sparc_code, 0, 4, is_encoder);
+ &sparc_code, 0, 4, 4, is_encoder);
}
diff --git a/Build/source/utils/xz-4.999.8beta/src/liblzma/simple/x86.c b/Build/source/utils/xz-4.999.9beta/src/liblzma/simple/x86.c
index a48a57501be..5d1509bb227 100644
--- a/Build/source/utils/xz-4.999.8beta/src/liblzma/simple/x86.c
+++ b/Build/source/utils/xz-4.999.9beta/src/liblzma/simple/x86.c
@@ -2,19 +2,12 @@
//
/// \file x86.c
/// \brief Filter for x86 binaries (BCJ filter)
+///
+// Authors: Igor Pavlov
+// Lasse Collin
//
-// Copyright (C) 1999-2006 Igor Pavlov
-// Copyright (C) 2007 Lasse Collin
-//
-// This library is free software; you can redistribute it and/or
-// modify it under the terms of the GNU Lesser General Public
-// License as published by the Free Software Foundation; either
-// version 2.1 of the License, or (at your option) any later version.
-//
-// This library is distributed in the hope that it will be useful,
-// but WITHOUT ANY WARRANTY; without even the implied warranty of
-// MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the GNU
-// Lesser General Public License for more details.
+// This file has been put into the public domain.
+// You can do whatever you want with this file.
//
///////////////////////////////////////////////////////////////////////////////
@@ -134,7 +127,7 @@ x86_coder_init(lzma_next_coder *next, lzma_allocator *allocator,
const lzma_filter_info *filters, bool is_encoder)
{
const lzma_ret ret = lzma_simple_coder_init(next, allocator, filters,
- &x86_code, sizeof(lzma_simple), 5, is_encoder);
+ &x86_code, sizeof(lzma_simple), 5, 1, is_encoder);
if (ret == LZMA_OK) {
next->coder->simple->prev_mask = 0;
diff --git a/Build/source/utils/xz-4.999.9beta/src/liblzma/subblock/Makefile.inc b/Build/source/utils/xz-4.999.9beta/src/liblzma/subblock/Makefile.inc
new file mode 100644
index 00000000000..a4710cc5955
--- /dev/null
+++ b/Build/source/utils/xz-4.999.9beta/src/liblzma/subblock/Makefile.inc
@@ -0,0 +1,20 @@
+##
+## Author: Lasse Collin
+##
+## This file has been put into the public domain.
+## You can do whatever you want with this file.
+##
+
+if COND_ENCODER_SUBBLOCK
+liblzma_la_SOURCES += \
+ subblock/subblock_encoder.c \
+ subblock/subblock_encoder.h
+endif
+
+if COND_DECODER_SUBBLOCK
+liblzma_la_SOURCES += \
+ subblock/subblock_decoder.c \
+ subblock/subblock_decoder.h \
+ subblock/subblock_decoder_helper.c \
+ subblock/subblock_decoder_helper.h
+endif
diff --git a/Build/source/utils/xz-4.999.8beta/src/liblzma/subblock/subblock_decoder.c b/Build/source/utils/xz-4.999.9beta/src/liblzma/subblock/subblock_decoder.c
index 3096b442bce..e055cee3ea7 100644
--- a/Build/source/utils/xz-4.999.8beta/src/liblzma/subblock/subblock_decoder.c
+++ b/Build/source/utils/xz-4.999.9beta/src/liblzma/subblock/subblock_decoder.c
@@ -3,17 +3,10 @@
/// \file subblock_decoder.c
/// \brief Decoder of the Subblock filter
//
-// Copyright (C) 2007 Lasse Collin
+// Author: Lasse Collin
//
-// This library is free software; you can redistribute it and/or
-// modify it under the terms of the GNU Lesser General Public
-// License as published by the Free Software Foundation; either
-// version 2.1 of the License, or (at your option) any later version.
-//
-// This library is distributed in the hope that it will be useful,
-// but WITHOUT ANY WARRANTY; without even the implied warranty of
-// MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the GNU
-// Lesser General Public License for more details.
+// This file has been put into the public domain.
+// You can do whatever you want with this file.
//
///////////////////////////////////////////////////////////////////////////////
diff --git a/Build/source/utils/xz-4.999.9beta/src/liblzma/subblock/subblock_decoder.h b/Build/source/utils/xz-4.999.9beta/src/liblzma/subblock/subblock_decoder.h
new file mode 100644
index 00000000000..d1030b2b94f
--- /dev/null
+++ b/Build/source/utils/xz-4.999.9beta/src/liblzma/subblock/subblock_decoder.h
@@ -0,0 +1,22 @@
+///////////////////////////////////////////////////////////////////////////////
+//
+/// \file subblock_decoder.h
+/// \brief Decoder of the Subblock filter
+//
+// Author: Lasse Collin
+//
+// This file has been put into the public domain.
+// You can do whatever you want with this file.
+//
+///////////////////////////////////////////////////////////////////////////////
+
+#ifndef LZMA_SUBBLOCK_DECODER_H
+#define LZMA_SUBBLOCK_DECODER_H
+
+#include "common.h"
+
+
+extern lzma_ret lzma_subblock_decoder_init(lzma_next_coder *next,
+ lzma_allocator *allocator, const lzma_filter_info *filters);
+
+#endif
diff --git a/Build/source/utils/xz-4.999.8beta/src/liblzma/subblock/subblock_decoder_helper.c b/Build/source/utils/xz-4.999.9beta/src/liblzma/subblock/subblock_decoder_helper.c
index ca8fed93e7e..2a864eddad9 100644
--- a/Build/source/utils/xz-4.999.8beta/src/liblzma/subblock/subblock_decoder_helper.c
+++ b/Build/source/utils/xz-4.999.9beta/src/liblzma/subblock/subblock_decoder_helper.c
@@ -5,17 +5,10 @@
///
/// This filter is used to indicate End of Input for subfilters needing it.
//
-// Copyright (C) 2007 Lasse Collin
+// Author: Lasse Collin
//
-// This library is free software; you can redistribute it and/or
-// modify it under the terms of the GNU Lesser General Public
-// License as published by the Free Software Foundation; either
-// version 2.1 of the License, or (at your option) any later version.
-//
-// This library is distributed in the hope that it will be useful,
-// but WITHOUT ANY WARRANTY; without even the implied warranty of
-// MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the GNU
-// Lesser General Public License for more details.
+// This file has been put into the public domain.
+// You can do whatever you want with this file.
//
///////////////////////////////////////////////////////////////////////////////
diff --git a/Build/source/utils/xz-4.999.8beta/src/liblzma/subblock/subblock_decoder_helper.h b/Build/source/utils/xz-4.999.9beta/src/liblzma/subblock/subblock_decoder_helper.h
index 2a3e999e92d..18dcbb39a39 100644
--- a/Build/source/utils/xz-4.999.8beta/src/liblzma/subblock/subblock_decoder_helper.h
+++ b/Build/source/utils/xz-4.999.9beta/src/liblzma/subblock/subblock_decoder_helper.h
@@ -5,17 +5,10 @@
///
/// This filter is used to indicate End of Input for subfilters needing it.
//
-// Copyright (C) 2007 Lasse Collin
+// Author: Lasse Collin
//
-// This library is free software; you can redistribute it and/or
-// modify it under the terms of the GNU Lesser General Public
-// License as published by the Free Software Foundation; either
-// version 2.1 of the License, or (at your option) any later version.
-//
-// This library is distributed in the hope that it will be useful,
-// but WITHOUT ANY WARRANTY; without even the implied warranty of
-// MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the GNU
-// Lesser General Public License for more details.
+// This file has been put into the public domain.
+// You can do whatever you want with this file.
//
///////////////////////////////////////////////////////////////////////////////
diff --git a/Build/source/utils/xz-4.999.8beta/src/liblzma/subblock/subblock_encoder.c b/Build/source/utils/xz-4.999.9beta/src/liblzma/subblock/subblock_encoder.c
index 3251f3f2bdd..b46b1c29754 100644
--- a/Build/source/utils/xz-4.999.8beta/src/liblzma/subblock/subblock_encoder.c
+++ b/Build/source/utils/xz-4.999.9beta/src/liblzma/subblock/subblock_encoder.c
@@ -3,17 +3,10 @@
/// \file subblock_encoder.c
/// \brief Encoder of the Subblock filter
//
-// Copyright (C) 2007, 2008 Lasse Collin
+// Author: Lasse Collin
//
-// This library is free software; you can redistribute it and/or
-// modify it under the terms of the GNU Lesser General Public
-// License as published by the Free Software Foundation; either
-// version 2.1 of the License, or (at your option) any later version.
-//
-// This library is distributed in the hope that it will be useful,
-// but WITHOUT ANY WARRANTY; without even the implied warranty of
-// MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the GNU
-// Lesser General Public License for more details.
+// This file has been put into the public domain.
+// You can do whatever you want with this file.
//
///////////////////////////////////////////////////////////////////////////////
diff --git a/Build/source/utils/xz-4.999.9beta/src/liblzma/subblock/subblock_encoder.h b/Build/source/utils/xz-4.999.9beta/src/liblzma/subblock/subblock_encoder.h
new file mode 100644
index 00000000000..ddbfe64bce8
--- /dev/null
+++ b/Build/source/utils/xz-4.999.9beta/src/liblzma/subblock/subblock_encoder.h
@@ -0,0 +1,21 @@
+///////////////////////////////////////////////////////////////////////////////
+//
+/// \file subblock_encoder.h
+/// \brief Encoder of the Subblock filter
+//
+// Author: Lasse Collin
+//
+// This file has been put into the public domain.
+// You can do whatever you want with this file.
+//
+///////////////////////////////////////////////////////////////////////////////
+
+#ifndef LZMA_SUBBLOCK_ENCODER_H
+#define LZMA_SUBBLOCK_ENCODER_H
+
+#include "common.h"
+
+extern lzma_ret lzma_subblock_encoder_init(lzma_next_coder *next,
+ lzma_allocator *allocator, const lzma_filter_info *filters);
+
+#endif
diff --git a/Build/source/utils/xz-4.999.9beta/src/lzmainfo/Makefile.am b/Build/source/utils/xz-4.999.9beta/src/lzmainfo/Makefile.am
new file mode 100644
index 00000000000..22295eea339
--- /dev/null
+++ b/Build/source/utils/xz-4.999.9beta/src/lzmainfo/Makefile.am
@@ -0,0 +1,29 @@
+##
+## Author: Lasse Collin
+##
+## This file has been put into the public domain.
+## You can do whatever you want with this file.
+##
+
+bin_PROGRAMS = lzmainfo
+
+lzmainfo_SOURCES = lzmainfo.c
+
+lzmainfo_CPPFLAGS = \
+ -DLOCALEDIR=\"$(localedir)\" \
+ -I$(top_srcdir)/src/common \
+ -I$(top_srcdir)/src/liblzma/api \
+ -I$(top_builddir)/lib \
+ $(DYNAMIC_CPPFLAGS)
+
+lzmainfo_LDFLAGS = $(DYNAMIC_LDFLAGS)
+lzmainfo_LDADD = $(top_builddir)/src/liblzma/liblzma.la
+
+if COND_GNULIB
+lzmainfo_LDADD += $(top_builddir)/lib/libgnu.a
+endif
+
+lzmainfo_LDADD += $(LTLIBINTL)
+
+
+dist_man_MANS = lzmainfo.1
diff --git a/Build/source/utils/xz-4.999.9beta/src/lzmainfo/Makefile.in b/Build/source/utils/xz-4.999.9beta/src/lzmainfo/Makefile.in
new file mode 100644
index 00000000000..81c698fd86f
--- /dev/null
+++ b/Build/source/utils/xz-4.999.9beta/src/lzmainfo/Makefile.in
@@ -0,0 +1,659 @@
+# Makefile.in generated by automake 1.11 from Makefile.am.
+# @configure_input@
+
+# Copyright (C) 1994, 1995, 1996, 1997, 1998, 1999, 2000, 2001, 2002,
+# 2003, 2004, 2005, 2006, 2007, 2008, 2009 Free Software Foundation,
+# Inc.
+# This Makefile.in is free software; the Free Software Foundation
+# gives unlimited permission to copy and/or distribute it,
+# with or without modifications, as long as this notice is preserved.
+
+# This program is distributed in the hope that it will be useful,
+# but WITHOUT ANY WARRANTY, to the extent permitted by law; without
+# even the implied warranty of MERCHANTABILITY or FITNESS FOR A
+# PARTICULAR PURPOSE.
+
+@SET_MAKE@
+
+VPATH = @srcdir@
+pkgdatadir = $(datadir)/@PACKAGE@
+pkgincludedir = $(includedir)/@PACKAGE@
+pkglibdir = $(libdir)/@PACKAGE@
+pkglibexecdir = $(libexecdir)/@PACKAGE@
+am__cd = CDPATH="$${ZSH_VERSION+.}$(PATH_SEPARATOR)" && cd
+install_sh_DATA = $(install_sh) -c -m 644
+install_sh_PROGRAM = $(install_sh) -c
+install_sh_SCRIPT = $(install_sh) -c
+INSTALL_HEADER = $(INSTALL_DATA)
+transform = $(program_transform_name)
+NORMAL_INSTALL = :
+PRE_INSTALL = :
+POST_INSTALL = :
+NORMAL_UNINSTALL = :
+PRE_UNINSTALL = :
+POST_UNINSTALL = :
+build_triplet = @build@
+host_triplet = @host@
+bin_PROGRAMS = lzmainfo$(EXEEXT)
+@COND_GNULIB_TRUE@am__append_1 = $(top_builddir)/lib/libgnu.a
+subdir = src/lzmainfo
+DIST_COMMON = $(dist_man_MANS) $(srcdir)/Makefile.am \
+ $(srcdir)/Makefile.in
+ACLOCAL_M4 = $(top_srcdir)/aclocal.m4
+am__aclocal_m4_deps = $(top_srcdir)/m4/acx_pthread.m4 \
+ $(top_srcdir)/m4/getopt.m4 $(top_srcdir)/m4/gettext.m4 \
+ $(top_srcdir)/m4/iconv.m4 $(top_srcdir)/m4/lc_cpucores.m4 \
+ $(top_srcdir)/m4/lc_physmem.m4 $(top_srcdir)/m4/lib-ld.m4 \
+ $(top_srcdir)/m4/lib-link.m4 $(top_srcdir)/m4/lib-prefix.m4 \
+ $(top_srcdir)/m4/libtool.m4 $(top_srcdir)/m4/ltoptions.m4 \
+ $(top_srcdir)/m4/ltsugar.m4 $(top_srcdir)/m4/ltversion.m4 \
+ $(top_srcdir)/m4/lt~obsolete.m4 $(top_srcdir)/m4/nls.m4 \
+ $(top_srcdir)/m4/po.m4 $(top_srcdir)/m4/posix-shell.m4 \
+ $(top_srcdir)/m4/progtest.m4 $(top_srcdir)/m4/visibility.m4 \
+ $(top_srcdir)/configure.ac
+am__configure_deps = $(am__aclocal_m4_deps) $(CONFIGURE_DEPENDENCIES) \
+ $(ACLOCAL_M4)
+mkinstalldirs = $(install_sh) -d
+CONFIG_HEADER = $(top_builddir)/config.h
+CONFIG_CLEAN_FILES =
+CONFIG_CLEAN_VPATH_FILES =
+am__installdirs = "$(DESTDIR)$(bindir)" "$(DESTDIR)$(man1dir)"
+PROGRAMS = $(bin_PROGRAMS)
+am_lzmainfo_OBJECTS = lzmainfo-lzmainfo.$(OBJEXT)
+lzmainfo_OBJECTS = $(am_lzmainfo_OBJECTS)
+am__DEPENDENCIES_1 =
+lzmainfo_DEPENDENCIES = $(top_builddir)/src/liblzma/liblzma.la \
+ $(am__append_1) $(am__DEPENDENCIES_1)
+lzmainfo_LINK = $(LIBTOOL) --tag=CC $(AM_LIBTOOLFLAGS) $(LIBTOOLFLAGS) \
+ --mode=link $(CCLD) $(AM_CFLAGS) $(CFLAGS) $(lzmainfo_LDFLAGS) \
+ $(LDFLAGS) -o $@
+DEFAULT_INCLUDES = -I.@am__isrc@ -I$(top_builddir)
+depcomp = $(SHELL) $(top_srcdir)/build-aux/depcomp
+am__depfiles_maybe = depfiles
+am__mv = mv -f
+COMPILE = $(CC) $(DEFS) $(DEFAULT_INCLUDES) $(INCLUDES) $(AM_CPPFLAGS) \
+ $(CPPFLAGS) $(AM_CFLAGS) $(CFLAGS)
+LTCOMPILE = $(LIBTOOL) --tag=CC $(AM_LIBTOOLFLAGS) $(LIBTOOLFLAGS) \
+ --mode=compile $(CC) $(DEFS) $(DEFAULT_INCLUDES) $(INCLUDES) \
+ $(AM_CPPFLAGS) $(CPPFLAGS) $(AM_CFLAGS) $(CFLAGS)
+CCLD = $(CC)
+LINK = $(LIBTOOL) --tag=CC $(AM_LIBTOOLFLAGS) $(LIBTOOLFLAGS) \
+ --mode=link $(CCLD) $(AM_CFLAGS) $(CFLAGS) $(AM_LDFLAGS) \
+ $(LDFLAGS) -o $@
+SOURCES = $(lzmainfo_SOURCES)
+DIST_SOURCES = $(lzmainfo_SOURCES)
+am__vpath_adj_setup = srcdirstrip=`echo "$(srcdir)" | sed 's|.|.|g'`;
+am__vpath_adj = case $$p in \
+ $(srcdir)/*) f=`echo "$$p" | sed "s|^$$srcdirstrip/||"`;; \
+ *) f=$$p;; \
+ esac;
+am__strip_dir = f=`echo $$p | sed -e 's|^.*/||'`;
+am__install_max = 40
+am__nobase_strip_setup = \
+ srcdirstrip=`echo "$(srcdir)" | sed 's/[].[^$$\\*|]/\\\\&/g'`
+am__nobase_strip = \
+ for p in $$list; do echo "$$p"; done | sed -e "s|$$srcdirstrip/||"
+am__nobase_list = $(am__nobase_strip_setup); \
+ for p in $$list; do echo "$$p $$p"; done | \
+ sed "s| $$srcdirstrip/| |;"' / .*\//!s/ .*/ ./; s,\( .*\)/[^/]*$$,\1,' | \
+ $(AWK) 'BEGIN { files["."] = "" } { files[$$2] = files[$$2] " " $$1; \
+ if (++n[$$2] == $(am__install_max)) \
+ { print $$2, files[$$2]; n[$$2] = 0; files[$$2] = "" } } \
+ END { for (dir in files) print dir, files[dir] }'
+am__base_list = \
+ sed '$$!N;$$!N;$$!N;$$!N;$$!N;$$!N;$$!N;s/\n/ /g' | \
+ sed '$$!N;$$!N;$$!N;$$!N;s/\n/ /g'
+man1dir = $(mandir)/man1
+NROFF = nroff
+MANS = $(dist_man_MANS)
+ETAGS = etags
+CTAGS = ctags
+DISTFILES = $(DIST_COMMON) $(DIST_SOURCES) $(TEXINFOS) $(EXTRA_DIST)
+ACLOCAL = @ACLOCAL@
+AMTAR = @AMTAR@
+AM_CFLAGS = @AM_CFLAGS@
+AR = @AR@
+AS = @AS@
+AUTOCONF = @AUTOCONF@
+AUTOHEADER = @AUTOHEADER@
+AUTOMAKE = @AUTOMAKE@
+AWK = @AWK@
+CC = @CC@
+CCAS = @CCAS@
+CCASDEPMODE = @CCASDEPMODE@
+CCASFLAGS = @CCASFLAGS@
+CCDEPMODE = @CCDEPMODE@
+CFLAGS = @CFLAGS@
+CFLAG_VISIBILITY = @CFLAG_VISIBILITY@
+CPP = @CPP@
+CPPFLAGS = @CPPFLAGS@
+CYGPATH_W = @CYGPATH_W@
+DEFS = @DEFS@
+DEPDIR = @DEPDIR@
+DLLTOOL = @DLLTOOL@
+DSYMUTIL = @DSYMUTIL@
+DUMPBIN = @DUMPBIN@
+DYNAMIC_CPPFLAGS = @DYNAMIC_CPPFLAGS@
+DYNAMIC_LDFLAGS = @DYNAMIC_LDFLAGS@
+ECHO_C = @ECHO_C@
+ECHO_N = @ECHO_N@
+ECHO_T = @ECHO_T@
+EGREP = @EGREP@
+EXEEXT = @EXEEXT@
+FGREP = @FGREP@
+GETOPT_H = @GETOPT_H@
+GMSGFMT = @GMSGFMT@
+GMSGFMT_015 = @GMSGFMT_015@
+GREP = @GREP@
+HAVE_VISIBILITY = @HAVE_VISIBILITY@
+INSTALL = @INSTALL@
+INSTALL_DATA = @INSTALL_DATA@
+INSTALL_PROGRAM = @INSTALL_PROGRAM@
+INSTALL_SCRIPT = @INSTALL_SCRIPT@
+INSTALL_STRIP_PROGRAM = @INSTALL_STRIP_PROGRAM@
+INTLLIBS = @INTLLIBS@
+INTL_MACOSX_LIBS = @INTL_MACOSX_LIBS@
+LD = @LD@
+LDFLAGS = @LDFLAGS@
+LIBICONV = @LIBICONV@
+LIBINTL = @LIBINTL@
+LIBOBJS = @LIBOBJS@
+LIBS = @LIBS@
+LIBTOOL = @LIBTOOL@
+LIPO = @LIPO@
+LN_S = @LN_S@
+LTLIBICONV = @LTLIBICONV@
+LTLIBINTL = @LTLIBINTL@
+LTLIBOBJS = @LTLIBOBJS@
+MAKEINFO = @MAKEINFO@
+MKDIR_P = @MKDIR_P@
+MSGFMT = @MSGFMT@
+MSGFMT_015 = @MSGFMT_015@
+MSGMERGE = @MSGMERGE@
+NM = @NM@
+NMEDIT = @NMEDIT@
+OBJDUMP = @OBJDUMP@
+OBJEXT = @OBJEXT@
+OTOOL = @OTOOL@
+OTOOL64 = @OTOOL64@
+PACKAGE = @PACKAGE@
+PACKAGE_BUGREPORT = @PACKAGE_BUGREPORT@
+PACKAGE_HOMEPAGE = @PACKAGE_HOMEPAGE@
+PACKAGE_NAME = @PACKAGE_NAME@
+PACKAGE_STRING = @PACKAGE_STRING@
+PACKAGE_TARNAME = @PACKAGE_TARNAME@
+PACKAGE_URL = @PACKAGE_URL@
+PACKAGE_VERSION = @PACKAGE_VERSION@
+PATH_SEPARATOR = @PATH_SEPARATOR@
+POSIX_SHELL = @POSIX_SHELL@
+POSUB = @POSUB@
+PREFERABLY_POSIX_SHELL = @PREFERABLY_POSIX_SHELL@
+PTHREAD_CC = @PTHREAD_CC@
+PTHREAD_CFLAGS = @PTHREAD_CFLAGS@
+PTHREAD_LIBS = @PTHREAD_LIBS@
+RANLIB = @RANLIB@
+RC = @RC@
+SED = @SED@
+SET_MAKE = @SET_MAKE@
+SHELL = @SHELL@
+STATIC_CPPFLAGS = @STATIC_CPPFLAGS@
+STATIC_LDFLAGS = @STATIC_LDFLAGS@
+STRIP = @STRIP@
+USE_NLS = @USE_NLS@
+VERSION = @VERSION@
+XGETTEXT = @XGETTEXT@
+XGETTEXT_015 = @XGETTEXT_015@
+abs_builddir = @abs_builddir@
+abs_srcdir = @abs_srcdir@
+abs_top_builddir = @abs_top_builddir@
+abs_top_srcdir = @abs_top_srcdir@
+ac_ct_CC = @ac_ct_CC@
+ac_ct_DUMPBIN = @ac_ct_DUMPBIN@
+acx_pthread_config = @acx_pthread_config@
+am__include = @am__include@
+am__leading_dot = @am__leading_dot@
+am__quote = @am__quote@
+am__tar = @am__tar@
+am__untar = @am__untar@
+bindir = @bindir@
+build = @build@
+build_alias = @build_alias@
+build_cpu = @build_cpu@
+build_os = @build_os@
+build_vendor = @build_vendor@
+builddir = @builddir@
+datadir = @datadir@
+datarootdir = @datarootdir@
+docdir = @docdir@
+dvidir = @dvidir@
+exec_prefix = @exec_prefix@
+host = @host@
+host_alias = @host_alias@
+host_cpu = @host_cpu@
+host_os = @host_os@
+host_vendor = @host_vendor@
+htmldir = @htmldir@
+includedir = @includedir@
+infodir = @infodir@
+install_sh = @install_sh@
+libdir = @libdir@
+libexecdir = @libexecdir@
+localedir = @localedir@
+localstatedir = @localstatedir@
+lt_ECHO = @lt_ECHO@
+mandir = @mandir@
+mkdir_p = @mkdir_p@
+oldincludedir = @oldincludedir@
+pdfdir = @pdfdir@
+prefix = @prefix@
+program_transform_name = @program_transform_name@
+psdir = @psdir@
+sbindir = @sbindir@
+sharedstatedir = @sharedstatedir@
+srcdir = @srcdir@
+sysconfdir = @sysconfdir@
+target_alias = @target_alias@
+top_build_prefix = @top_build_prefix@
+top_builddir = @top_builddir@
+top_srcdir = @top_srcdir@
+xz = @xz@
+lzmainfo_SOURCES = lzmainfo.c
+lzmainfo_CPPFLAGS = \
+ -DLOCALEDIR=\"$(localedir)\" \
+ -I$(top_srcdir)/src/common \
+ -I$(top_srcdir)/src/liblzma/api \
+ -I$(top_builddir)/lib \
+ $(DYNAMIC_CPPFLAGS)
+
+lzmainfo_LDFLAGS = $(DYNAMIC_LDFLAGS)
+lzmainfo_LDADD = $(top_builddir)/src/liblzma/liblzma.la \
+ $(am__append_1) $(LTLIBINTL)
+dist_man_MANS = lzmainfo.1
+all: all-am
+
+.SUFFIXES:
+.SUFFIXES: .c .lo .o .obj
+$(srcdir)/Makefile.in: $(srcdir)/Makefile.am $(am__configure_deps)
+ @for dep in $?; do \
+ case '$(am__configure_deps)' in \
+ *$$dep*) \
+ ( cd $(top_builddir) && $(MAKE) $(AM_MAKEFLAGS) am--refresh ) \
+ && { if test -f $@; then exit 0; else break; fi; }; \
+ exit 1;; \
+ esac; \
+ done; \
+ echo ' cd $(top_srcdir) && $(AUTOMAKE) --foreign src/lzmainfo/Makefile'; \
+ $(am__cd) $(top_srcdir) && \
+ $(AUTOMAKE) --foreign src/lzmainfo/Makefile
+.PRECIOUS: Makefile
+Makefile: $(srcdir)/Makefile.in $(top_builddir)/config.status
+ @case '$?' in \
+ *config.status*) \
+ cd $(top_builddir) && $(MAKE) $(AM_MAKEFLAGS) am--refresh;; \
+ *) \
+ echo ' cd $(top_builddir) && $(SHELL) ./config.status $(subdir)/$@ $(am__depfiles_maybe)'; \
+ cd $(top_builddir) && $(SHELL) ./config.status $(subdir)/$@ $(am__depfiles_maybe);; \
+ esac;
+
+$(top_builddir)/config.status: $(top_srcdir)/configure $(CONFIG_STATUS_DEPENDENCIES)
+ cd $(top_builddir) && $(MAKE) $(AM_MAKEFLAGS) am--refresh
+
+$(top_srcdir)/configure: $(am__configure_deps)
+ cd $(top_builddir) && $(MAKE) $(AM_MAKEFLAGS) am--refresh
+$(ACLOCAL_M4): $(am__aclocal_m4_deps)
+ cd $(top_builddir) && $(MAKE) $(AM_MAKEFLAGS) am--refresh
+$(am__aclocal_m4_deps):
+install-binPROGRAMS: $(bin_PROGRAMS)
+ @$(NORMAL_INSTALL)
+ test -z "$(bindir)" || $(MKDIR_P) "$(DESTDIR)$(bindir)"
+ @list='$(bin_PROGRAMS)'; test -n "$(bindir)" || list=; \
+ for p in $$list; do echo "$$p $$p"; done | \
+ sed 's/$(EXEEXT)$$//' | \
+ while read p p1; do if test -f $$p || test -f $$p1; \
+ then echo "$$p"; echo "$$p"; else :; fi; \
+ done | \
+ sed -e 'p;s,.*/,,;n;h' -e 's|.*|.|' \
+ -e 'p;x;s,.*/,,;s/$(EXEEXT)$$//;$(transform);s/$$/$(EXEEXT)/' | \
+ sed 'N;N;N;s,\n, ,g' | \
+ $(AWK) 'BEGIN { files["."] = ""; dirs["."] = 1 } \
+ { d=$$3; if (dirs[d] != 1) { print "d", d; dirs[d] = 1 } \
+ if ($$2 == $$4) files[d] = files[d] " " $$1; \
+ else { print "f", $$3 "/" $$4, $$1; } } \
+ END { for (d in files) print "f", d, files[d] }' | \
+ while read type dir files; do \
+ if test "$$dir" = .; then dir=; else dir=/$$dir; fi; \
+ test -z "$$files" || { \
+ echo " $(INSTALL_PROGRAM_ENV) $(LIBTOOL) $(AM_LIBTOOLFLAGS) $(LIBTOOLFLAGS) --mode=install $(INSTALL_PROGRAM) $$files '$(DESTDIR)$(bindir)$$dir'"; \
+ $(INSTALL_PROGRAM_ENV) $(LIBTOOL) $(AM_LIBTOOLFLAGS) $(LIBTOOLFLAGS) --mode=install $(INSTALL_PROGRAM) $$files "$(DESTDIR)$(bindir)$$dir" || exit $$?; \
+ } \
+ ; done
+
+uninstall-binPROGRAMS:
+ @$(NORMAL_UNINSTALL)
+ @list='$(bin_PROGRAMS)'; test -n "$(bindir)" || list=; \
+ files=`for p in $$list; do echo "$$p"; done | \
+ sed -e 'h;s,^.*/,,;s/$(EXEEXT)$$//;$(transform)' \
+ -e 's/$$/$(EXEEXT)/' `; \
+ test -n "$$list" || exit 0; \
+ echo " ( cd '$(DESTDIR)$(bindir)' && rm -f" $$files ")"; \
+ cd "$(DESTDIR)$(bindir)" && rm -f $$files
+
+clean-binPROGRAMS:
+ @list='$(bin_PROGRAMS)'; test -n "$$list" || exit 0; \
+ echo " rm -f" $$list; \
+ rm -f $$list || exit $$?; \
+ test -n "$(EXEEXT)" || exit 0; \
+ list=`for p in $$list; do echo "$$p"; done | sed 's/$(EXEEXT)$$//'`; \
+ echo " rm -f" $$list; \
+ rm -f $$list
+lzmainfo$(EXEEXT): $(lzmainfo_OBJECTS) $(lzmainfo_DEPENDENCIES)
+ @rm -f lzmainfo$(EXEEXT)
+ $(lzmainfo_LINK) $(lzmainfo_OBJECTS) $(lzmainfo_LDADD) $(LIBS)
+
+mostlyclean-compile:
+ -rm -f *.$(OBJEXT)
+
+distclean-compile:
+ -rm -f *.tab.c
+
+@AMDEP_TRUE@@am__include@ @am__quote@./$(DEPDIR)/lzmainfo-lzmainfo.Po@am__quote@
+
+.c.o:
+@am__fastdepCC_TRUE@ $(COMPILE) -MT $@ -MD -MP -MF $(DEPDIR)/$*.Tpo -c -o $@ $<
+@am__fastdepCC_TRUE@ $(am__mv) $(DEPDIR)/$*.Tpo $(DEPDIR)/$*.Po
+@AMDEP_TRUE@@am__fastdepCC_FALSE@ source='$<' object='$@' libtool=no @AMDEPBACKSLASH@
+@AMDEP_TRUE@@am__fastdepCC_FALSE@ DEPDIR=$(DEPDIR) $(CCDEPMODE) $(depcomp) @AMDEPBACKSLASH@
+@am__fastdepCC_FALSE@ $(COMPILE) -c $<
+
+.c.obj:
+@am__fastdepCC_TRUE@ $(COMPILE) -MT $@ -MD -MP -MF $(DEPDIR)/$*.Tpo -c -o $@ `$(CYGPATH_W) '$<'`
+@am__fastdepCC_TRUE@ $(am__mv) $(DEPDIR)/$*.Tpo $(DEPDIR)/$*.Po
+@AMDEP_TRUE@@am__fastdepCC_FALSE@ source='$<' object='$@' libtool=no @AMDEPBACKSLASH@
+@AMDEP_TRUE@@am__fastdepCC_FALSE@ DEPDIR=$(DEPDIR) $(CCDEPMODE) $(depcomp) @AMDEPBACKSLASH@
+@am__fastdepCC_FALSE@ $(COMPILE) -c `$(CYGPATH_W) '$<'`
+
+.c.lo:
+@am__fastdepCC_TRUE@ $(LTCOMPILE) -MT $@ -MD -MP -MF $(DEPDIR)/$*.Tpo -c -o $@ $<
+@am__fastdepCC_TRUE@ $(am__mv) $(DEPDIR)/$*.Tpo $(DEPDIR)/$*.Plo
+@AMDEP_TRUE@@am__fastdepCC_FALSE@ source='$<' object='$@' libtool=yes @AMDEPBACKSLASH@
+@AMDEP_TRUE@@am__fastdepCC_FALSE@ DEPDIR=$(DEPDIR) $(CCDEPMODE) $(depcomp) @AMDEPBACKSLASH@
+@am__fastdepCC_FALSE@ $(LTCOMPILE) -c -o $@ $<
+
+lzmainfo-lzmainfo.o: lzmainfo.c
+@am__fastdepCC_TRUE@ $(CC) $(DEFS) $(DEFAULT_INCLUDES) $(INCLUDES) $(lzmainfo_CPPFLAGS) $(CPPFLAGS) $(AM_CFLAGS) $(CFLAGS) -MT lzmainfo-lzmainfo.o -MD -MP -MF $(DEPDIR)/lzmainfo-lzmainfo.Tpo -c -o lzmainfo-lzmainfo.o `test -f 'lzmainfo.c' || echo '$(srcdir)/'`lzmainfo.c
+@am__fastdepCC_TRUE@ $(am__mv) $(DEPDIR)/lzmainfo-lzmainfo.Tpo $(DEPDIR)/lzmainfo-lzmainfo.Po
+@AMDEP_TRUE@@am__fastdepCC_FALSE@ source='lzmainfo.c' object='lzmainfo-lzmainfo.o' libtool=no @AMDEPBACKSLASH@
+@AMDEP_TRUE@@am__fastdepCC_FALSE@ DEPDIR=$(DEPDIR) $(CCDEPMODE) $(depcomp) @AMDEPBACKSLASH@
+@am__fastdepCC_FALSE@ $(CC) $(DEFS) $(DEFAULT_INCLUDES) $(INCLUDES) $(lzmainfo_CPPFLAGS) $(CPPFLAGS) $(AM_CFLAGS) $(CFLAGS) -c -o lzmainfo-lzmainfo.o `test -f 'lzmainfo.c' || echo '$(srcdir)/'`lzmainfo.c
+
+lzmainfo-lzmainfo.obj: lzmainfo.c
+@am__fastdepCC_TRUE@ $(CC) $(DEFS) $(DEFAULT_INCLUDES) $(INCLUDES) $(lzmainfo_CPPFLAGS) $(CPPFLAGS) $(AM_CFLAGS) $(CFLAGS) -MT lzmainfo-lzmainfo.obj -MD -MP -MF $(DEPDIR)/lzmainfo-lzmainfo.Tpo -c -o lzmainfo-lzmainfo.obj `if test -f 'lzmainfo.c'; then $(CYGPATH_W) 'lzmainfo.c'; else $(CYGPATH_W) '$(srcdir)/lzmainfo.c'; fi`
+@am__fastdepCC_TRUE@ $(am__mv) $(DEPDIR)/lzmainfo-lzmainfo.Tpo $(DEPDIR)/lzmainfo-lzmainfo.Po
+@AMDEP_TRUE@@am__fastdepCC_FALSE@ source='lzmainfo.c' object='lzmainfo-lzmainfo.obj' libtool=no @AMDEPBACKSLASH@
+@AMDEP_TRUE@@am__fastdepCC_FALSE@ DEPDIR=$(DEPDIR) $(CCDEPMODE) $(depcomp) @AMDEPBACKSLASH@
+@am__fastdepCC_FALSE@ $(CC) $(DEFS) $(DEFAULT_INCLUDES) $(INCLUDES) $(lzmainfo_CPPFLAGS) $(CPPFLAGS) $(AM_CFLAGS) $(CFLAGS) -c -o lzmainfo-lzmainfo.obj `if test -f 'lzmainfo.c'; then $(CYGPATH_W) 'lzmainfo.c'; else $(CYGPATH_W) '$(srcdir)/lzmainfo.c'; fi`
+
+mostlyclean-libtool:
+ -rm -f *.lo
+
+clean-libtool:
+ -rm -rf .libs _libs
+install-man1: $(dist_man_MANS)
+ @$(NORMAL_INSTALL)
+ test -z "$(man1dir)" || $(MKDIR_P) "$(DESTDIR)$(man1dir)"
+ @list=''; test -n "$(man1dir)" || exit 0; \
+ { for i in $$list; do echo "$$i"; done; \
+ l2='$(dist_man_MANS)'; for i in $$l2; do echo "$$i"; done | \
+ sed -n '/\.1[a-z]*$$/p'; \
+ } | while read p; do \
+ if test -f $$p; then d=; else d="$(srcdir)/"; fi; \
+ echo "$$d$$p"; echo "$$p"; \
+ done | \
+ sed -e 'n;s,.*/,,;p;h;s,.*\.,,;s,^[^1][0-9a-z]*$$,1,;x' \
+ -e 's,\.[0-9a-z]*$$,,;$(transform);G;s,\n,.,' | \
+ sed 'N;N;s,\n, ,g' | { \
+ list=; while read file base inst; do \
+ if test "$$base" = "$$inst"; then list="$$list $$file"; else \
+ echo " $(INSTALL_DATA) '$$file' '$(DESTDIR)$(man1dir)/$$inst'"; \
+ $(INSTALL_DATA) "$$file" "$(DESTDIR)$(man1dir)/$$inst" || exit $$?; \
+ fi; \
+ done; \
+ for i in $$list; do echo "$$i"; done | $(am__base_list) | \
+ while read files; do \
+ test -z "$$files" || { \
+ echo " $(INSTALL_DATA) $$files '$(DESTDIR)$(man1dir)'"; \
+ $(INSTALL_DATA) $$files "$(DESTDIR)$(man1dir)" || exit $$?; }; \
+ done; }
+
+uninstall-man1:
+ @$(NORMAL_UNINSTALL)
+ @list=''; test -n "$(man1dir)" || exit 0; \
+ files=`{ for i in $$list; do echo "$$i"; done; \
+ l2='$(dist_man_MANS)'; for i in $$l2; do echo "$$i"; done | \
+ sed -n '/\.1[a-z]*$$/p'; \
+ } | sed -e 's,.*/,,;h;s,.*\.,,;s,^[^1][0-9a-z]*$$,1,;x' \
+ -e 's,\.[0-9a-z]*$$,,;$(transform);G;s,\n,.,'`; \
+ test -z "$$files" || { \
+ echo " ( cd '$(DESTDIR)$(man1dir)' && rm -f" $$files ")"; \
+ cd "$(DESTDIR)$(man1dir)" && rm -f $$files; }
+
+ID: $(HEADERS) $(SOURCES) $(LISP) $(TAGS_FILES)
+ list='$(SOURCES) $(HEADERS) $(LISP) $(TAGS_FILES)'; \
+ unique=`for i in $$list; do \
+ if test -f "$$i"; then echo $$i; else echo $(srcdir)/$$i; fi; \
+ done | \
+ $(AWK) '{ files[$$0] = 1; nonempty = 1; } \
+ END { if (nonempty) { for (i in files) print i; }; }'`; \
+ mkid -fID $$unique
+tags: TAGS
+
+TAGS: $(HEADERS) $(SOURCES) $(TAGS_DEPENDENCIES) \
+ $(TAGS_FILES) $(LISP)
+ set x; \
+ here=`pwd`; \
+ list='$(SOURCES) $(HEADERS) $(LISP) $(TAGS_FILES)'; \
+ unique=`for i in $$list; do \
+ if test -f "$$i"; then echo $$i; else echo $(srcdir)/$$i; fi; \
+ done | \
+ $(AWK) '{ files[$$0] = 1; nonempty = 1; } \
+ END { if (nonempty) { for (i in files) print i; }; }'`; \
+ shift; \
+ if test -z "$(ETAGS_ARGS)$$*$$unique"; then :; else \
+ test -n "$$unique" || unique=$$empty_fix; \
+ if test $$# -gt 0; then \
+ $(ETAGS) $(ETAGSFLAGS) $(AM_ETAGSFLAGS) $(ETAGS_ARGS) \
+ "$$@" $$unique; \
+ else \
+ $(ETAGS) $(ETAGSFLAGS) $(AM_ETAGSFLAGS) $(ETAGS_ARGS) \
+ $$unique; \
+ fi; \
+ fi
+ctags: CTAGS
+CTAGS: $(HEADERS) $(SOURCES) $(TAGS_DEPENDENCIES) \
+ $(TAGS_FILES) $(LISP)
+ list='$(SOURCES) $(HEADERS) $(LISP) $(TAGS_FILES)'; \
+ unique=`for i in $$list; do \
+ if test -f "$$i"; then echo $$i; else echo $(srcdir)/$$i; fi; \
+ done | \
+ $(AWK) '{ files[$$0] = 1; nonempty = 1; } \
+ END { if (nonempty) { for (i in files) print i; }; }'`; \
+ test -z "$(CTAGS_ARGS)$$unique" \
+ || $(CTAGS) $(CTAGSFLAGS) $(AM_CTAGSFLAGS) $(CTAGS_ARGS) \
+ $$unique
+
+GTAGS:
+ here=`$(am__cd) $(top_builddir) && pwd` \
+ && $(am__cd) $(top_srcdir) \
+ && gtags -i $(GTAGS_ARGS) "$$here"
+
+distclean-tags:
+ -rm -f TAGS ID GTAGS GRTAGS GSYMS GPATH tags
+
+distdir: $(DISTFILES)
+ @list='$(MANS)'; if test -n "$$list"; then \
+ list=`for p in $$list; do \
+ if test -f $$p; then d=; else d="$(srcdir)/"; fi; \
+ if test -f "$$d$$p"; then echo "$$d$$p"; else :; fi; done`; \
+ if test -n "$$list" && \
+ grep 'ab help2man is required to generate this page' $$list >/dev/null; then \
+ echo "error: found man pages containing the \`missing help2man' replacement text:" >&2; \
+ grep -l 'ab help2man is required to generate this page' $$list | sed 's/^/ /' >&2; \
+ echo " to fix them, install help2man, remove and regenerate the man pages;" >&2; \
+ echo " typically \`make maintainer-clean' will remove them" >&2; \
+ exit 1; \
+ else :; fi; \
+ else :; fi
+ @srcdirstrip=`echo "$(srcdir)" | sed 's/[].[^$$\\*]/\\\\&/g'`; \
+ topsrcdirstrip=`echo "$(top_srcdir)" | sed 's/[].[^$$\\*]/\\\\&/g'`; \
+ list='$(DISTFILES)'; \
+ dist_files=`for file in $$list; do echo $$file; done | \
+ sed -e "s|^$$srcdirstrip/||;t" \
+ -e "s|^$$topsrcdirstrip/|$(top_builddir)/|;t"`; \
+ case $$dist_files in \
+ */*) $(MKDIR_P) `echo "$$dist_files" | \
+ sed '/\//!d;s|^|$(distdir)/|;s,/[^/]*$$,,' | \
+ sort -u` ;; \
+ esac; \
+ for file in $$dist_files; do \
+ if test -f $$file || test -d $$file; then d=.; else d=$(srcdir); fi; \
+ if test -d $$d/$$file; then \
+ dir=`echo "/$$file" | sed -e 's,/[^/]*$$,,'`; \
+ if test -d "$(distdir)/$$file"; then \
+ find "$(distdir)/$$file" -type d ! -perm -700 -exec chmod u+rwx {} \;; \
+ fi; \
+ if test -d $(srcdir)/$$file && test $$d != $(srcdir); then \
+ cp -fpR $(srcdir)/$$file "$(distdir)$$dir" || exit 1; \
+ find "$(distdir)/$$file" -type d ! -perm -700 -exec chmod u+rwx {} \;; \
+ fi; \
+ cp -fpR $$d/$$file "$(distdir)$$dir" || exit 1; \
+ else \
+ test -f "$(distdir)/$$file" \
+ || cp -p $$d/$$file "$(distdir)/$$file" \
+ || exit 1; \
+ fi; \
+ done
+check-am: all-am
+check: check-am
+all-am: Makefile $(PROGRAMS) $(MANS)
+installdirs:
+ for dir in "$(DESTDIR)$(bindir)" "$(DESTDIR)$(man1dir)"; do \
+ test -z "$$dir" || $(MKDIR_P) "$$dir"; \
+ done
+install: install-am
+install-exec: install-exec-am
+install-data: install-data-am
+uninstall: uninstall-am
+
+install-am: all-am
+ @$(MAKE) $(AM_MAKEFLAGS) install-exec-am install-data-am
+
+installcheck: installcheck-am
+install-strip:
+ $(MAKE) $(AM_MAKEFLAGS) INSTALL_PROGRAM="$(INSTALL_STRIP_PROGRAM)" \
+ install_sh_PROGRAM="$(INSTALL_STRIP_PROGRAM)" INSTALL_STRIP_FLAG=-s \
+ `test -z '$(STRIP)' || \
+ echo "INSTALL_PROGRAM_ENV=STRIPPROG='$(STRIP)'"` install
+mostlyclean-generic:
+
+clean-generic:
+
+distclean-generic:
+ -test -z "$(CONFIG_CLEAN_FILES)" || rm -f $(CONFIG_CLEAN_FILES)
+ -test . = "$(srcdir)" || test -z "$(CONFIG_CLEAN_VPATH_FILES)" || rm -f $(CONFIG_CLEAN_VPATH_FILES)
+
+maintainer-clean-generic:
+ @echo "This command is intended for maintainers to use"
+ @echo "it deletes files that may require special tools to rebuild."
+clean: clean-am
+
+clean-am: clean-binPROGRAMS clean-generic clean-libtool mostlyclean-am
+
+distclean: distclean-am
+ -rm -rf ./$(DEPDIR)
+ -rm -f Makefile
+distclean-am: clean-am distclean-compile distclean-generic \
+ distclean-tags
+
+dvi: dvi-am
+
+dvi-am:
+
+html: html-am
+
+html-am:
+
+info: info-am
+
+info-am:
+
+install-data-am: install-man
+
+install-dvi: install-dvi-am
+
+install-dvi-am:
+
+install-exec-am: install-binPROGRAMS
+
+install-html: install-html-am
+
+install-html-am:
+
+install-info: install-info-am
+
+install-info-am:
+
+install-man: install-man1
+
+install-pdf: install-pdf-am
+
+install-pdf-am:
+
+install-ps: install-ps-am
+
+install-ps-am:
+
+installcheck-am:
+
+maintainer-clean: maintainer-clean-am
+ -rm -rf ./$(DEPDIR)
+ -rm -f Makefile
+maintainer-clean-am: distclean-am maintainer-clean-generic
+
+mostlyclean: mostlyclean-am
+
+mostlyclean-am: mostlyclean-compile mostlyclean-generic \
+ mostlyclean-libtool
+
+pdf: pdf-am
+
+pdf-am:
+
+ps: ps-am
+
+ps-am:
+
+uninstall-am: uninstall-binPROGRAMS uninstall-man
+
+uninstall-man: uninstall-man1
+
+.MAKE: install-am install-strip
+
+.PHONY: CTAGS GTAGS all all-am check check-am clean clean-binPROGRAMS \
+ clean-generic clean-libtool ctags distclean distclean-compile \
+ distclean-generic distclean-libtool distclean-tags distdir dvi \
+ dvi-am html html-am info info-am install install-am \
+ install-binPROGRAMS install-data install-data-am install-dvi \
+ install-dvi-am install-exec install-exec-am install-html \
+ install-html-am install-info install-info-am install-man \
+ install-man1 install-pdf install-pdf-am install-ps \
+ install-ps-am install-strip installcheck installcheck-am \
+ installdirs maintainer-clean maintainer-clean-generic \
+ mostlyclean mostlyclean-compile mostlyclean-generic \
+ mostlyclean-libtool pdf pdf-am ps ps-am tags uninstall \
+ uninstall-am uninstall-binPROGRAMS uninstall-man \
+ uninstall-man1
+
+
+# Tell versions [3.59,3.63) of GNU make to not export all variables.
+# Otherwise a system limit (for SysV at least) may be exceeded.
+.NOEXPORT:
diff --git a/Build/source/utils/xz-4.999.9beta/src/lzmainfo/lzmainfo.1 b/Build/source/utils/xz-4.999.9beta/src/lzmainfo/lzmainfo.1
new file mode 100644
index 00000000000..ef736a6c662
--- /dev/null
+++ b/Build/source/utils/xz-4.999.9beta/src/lzmainfo/lzmainfo.1
@@ -0,0 +1,55 @@
+.\"
+.\" Author: Lasse Collin
+.\"
+.\" This file has been put into the public domain.
+.\" You can do whatever you want with this file.
+.\"
+.TH LZMAINFO 1 "2009-08-13" "Tukaani" "XZ Utils"
+.SH NAME
+lzmainfo \- show infomation stored in the .lzma file header
+.SH SYNOPSIS
+.B lzmainfo
+.RB [ \-\-help ]
+.RB [ \-\-version ]
+.RI [ file ]...
+.SH DESCRIPTION
+.B lzmainfo
+shows information stored in the
+.B .lzma
+file header. It reads the first 13 bytes from the specified
+.IR file ,
+decodes the header, and prints it to standard output in human
+readable format. If no
+.I files
+are given or
+.I file
+is
+.BR \- ,
+standard input is read.
+.PP
+Usually the most interesting information is the uncompressed size and
+the dictionary size. Uncompressed size can be shown only if the file is
+in the non-streamed
+.B .lzma
+format variant. The amount of memory required to decompress the file is
+a few dozen kilobytes plus the dictionary size.
+.PP
+.B lzmainfo
+is included in XZ Utils primarily for backward compatibility with LZMA Utils.
+.SH EXIT STATUS
+.TP
+.B 0
+All is good.
+.TP
+.B 1
+An error occurred.
+.SH BUGS
+.B lzmainfo
+uses
+.B MB
+while the correct suffix would be
+.B MiB
+(2^20 bytes).
+This is to keep the output compatible with LZMA Utils.
+.SH SEE ALSO
+.BR xz (1)
diff --git a/Build/source/utils/xz-4.999.9beta/src/lzmainfo/lzmainfo.c b/Build/source/utils/xz-4.999.9beta/src/lzmainfo/lzmainfo.c
new file mode 100644
index 00000000000..d9ae311afec
--- /dev/null
+++ b/Build/source/utils/xz-4.999.9beta/src/lzmainfo/lzmainfo.c
@@ -0,0 +1,242 @@
+///////////////////////////////////////////////////////////////////////////////
+//
+/// \file lzmainfo.c
+/// \brief lzmainfo tool for compatibility with LZMA Utils
+//
+// Author: Lasse Collin
+//
+// This file has been put into the public domain.
+// You can do whatever you want with this file.
+//
+///////////////////////////////////////////////////////////////////////////////
+
+#include "sysdefs.h"
+#include <stdio.h>
+#include <errno.h>
+
+#ifdef ENABLE_NLS
+# include <libintl.h>
+# define _(msgid) gettext(msgid)
+#else
+# define _(msgid) msgid
+#endif
+
+#include "lzma.h"
+#include "getopt.h"
+
+
+/// Name of the program from argv[0]
+static const char *argv0;
+
+
+/// Close stdout unless we are already going to exit with EXIT_FAILURE.
+/// If closing stdout fails, set exit status to EXIT_FAILURE and print
+/// an error message to stderr. We don't care about closing stderr,
+/// because we don't print anything to stderr unless we are going to
+/// use EXIT_FAILURE anyway.
+static void lzma_attribute((noreturn))
+my_exit(int status)
+{
+ if (status != EXIT_FAILURE) {
+ const int ferror_err = ferror(stdout);
+ const int fclose_err = fclose(stdout);
+
+ if (ferror_err || fclose_err) {
+ // If it was fclose() that failed, we have the reason
+ // in errno. If only ferror() indicated an error,
+ // we have no idea what the reason was.
+ fprintf(stderr, "%s: %s: %s\n", argv0,
+ _("Writing to standard output "
+ "failed"),
+ fclose_err ? strerror(errno)
+ : _("Unknown error"));
+ status = EXIT_FAILURE;
+ }
+ }
+
+ exit(status);
+}
+
+
+static void lzma_attribute((noreturn))
+help(void)
+{
+ printf(
+_("Usage: %s [--help] [--version] [FILE]...\n"
+"Show information stored in the .lzma file header"), argv0);
+
+ printf(_(
+"\nWith no FILE, or when FILE is -, read standard input.\n"));
+ printf("\n");
+
+ printf(_("Report bugs to <%s> (in English or Finnish).\n"),
+ PACKAGE_BUGREPORT);
+ printf(_("%s home page: <%s>\n"), PACKAGE_NAME, PACKAGE_HOMEPAGE);
+
+ my_exit(EXIT_SUCCESS);
+}
+
+
+static void lzma_attribute((noreturn))
+version(void)
+{
+ puts("lzmainfo (" PACKAGE_NAME ") " PACKAGE_VERSION);
+ my_exit(EXIT_SUCCESS);
+}
+
+
+/// Parse command line options.
+static void
+parse_args(int argc, char **argv)
+{
+ enum {
+ OPT_HELP,
+ OPT_VERSION,
+ };
+
+ static const struct option long_opts[] = {
+ { "help", no_argument, NULL, OPT_HELP },
+ { "version", no_argument, NULL, OPT_VERSION },
+ { NULL, 0, NULL, 0 }
+ };
+
+ int c;
+ while ((c = getopt_long(argc, argv, "", long_opts, NULL)) != -1) {
+ switch (c) {
+ case OPT_HELP:
+ help();
+
+ case OPT_VERSION:
+ version();
+
+ default:
+ exit(EXIT_FAILURE);
+ }
+ }
+
+ return;
+}
+
+
+/// Primitive base-2 logarithm for integers
+static uint32_t
+my_log2(uint32_t n)
+{
+ uint32_t e;
+ for (e = 0; n > 1; ++e, n /= 2) ;
+ return e;
+}
+
+
+/// Parse the .lzma header and display information about it.
+static bool
+lzmainfo(const char *name, FILE *f)
+{
+ uint8_t buf[13];
+ const size_t size = fread(buf, 1, sizeof(buf), f);
+ if (size != 13) {
+ fprintf(stderr, "%s: %s: %s\n", argv0, name,
+ ferror(f) ? strerror(errno)
+ : _("File is too small to be a .lzma file"));
+ return true;
+ }
+
+ lzma_filter filter = { .id = LZMA_FILTER_LZMA1 };
+
+ // Parse the first five bytes.
+ switch (lzma_properties_decode(&filter, NULL, buf, 5)) {
+ case LZMA_OK:
+ break;
+
+ case LZMA_OPTIONS_ERROR:
+ fprintf(stderr, "%s: %s: %s\n", argv0, name,
+ _("Not a .lzma file"));
+ return true;
+
+ case LZMA_MEM_ERROR:
+ fprintf(stderr, "%s: %s\n", argv0, strerror(ENOMEM));
+ exit(EXIT_FAILURE);
+
+ default:
+ fprintf(stderr, "%s: %s\n", argv0, _("Internal error (bug)"));
+ exit(EXIT_FAILURE);
+ }
+
+ // Uncompressed size
+ uint64_t uncompressed_size = 0;
+ for (size_t i = 0; i < 8; ++i)
+ uncompressed_size |= (uint64_t)(buf[5 + i]) << (i * 8);
+
+ // Display the results. We don't want to translate these and also
+ // will use MB instead of MiB, because someone could be parsing
+ // this output and we don't want to break that when people move
+ // from LZMA Utils to XZ Utils.
+ if (f != stdin)
+ printf("%s\n", name);
+
+ printf("Uncompressed size: ");
+ if (uncompressed_size == UINT64_MAX)
+ printf("Unknown");
+ else
+ printf("%" PRIu64 " MB (%" PRIu64 " bytes)",
+ (uncompressed_size + 512 * 1024)
+ / (1024 * 1024),
+ uncompressed_size);
+
+ lzma_options_lzma *opt = filter.options;
+
+ printf("\nDictionary size: "
+ "%u MB (2^%u bytes)\n"
+ "Literal context bits (lc): %" PRIu32 "\n"
+ "Literal pos bits (lp): %" PRIu32 "\n"
+ "Number of pos bits (pb): %" PRIu32 "\n",
+ (opt->dict_size + 512 * 1024) / (1024 * 1024),
+ my_log2(opt->dict_size), opt->lc, opt->lp, opt->pb);
+
+ free(opt);
+
+ return false;
+}
+
+
+extern int
+main(int argc, char **argv)
+{
+ int ret = EXIT_SUCCESS;
+ argv0 = argv[0];
+
+ parse_args(argc, argv);
+
+ // We print empty lines around the output only when reading from
+ // files specified on the command line. This is due to how
+ // LZMA Utils did it.
+ if (optind == argc) {
+ lzmainfo("(stdin)", stdin);
+ } else {
+ printf("\n");
+
+ do {
+ if (strcmp(argv[optind], "-") == 0) {
+ if (lzmainfo("(stdin)", stdin))
+ ret = EXIT_FAILURE;
+ } else {
+ FILE *f = fopen(argv[optind], "r");
+ if (f == NULL) {
+ ret = EXIT_FAILURE;
+ fprintf(stderr, "%s: %s: %s\n",
+ argv0, argv[optind],
+ strerror(errno));
+ continue;
+ }
+
+ if (lzmainfo(argv[optind], f))
+ ret = EXIT_FAILURE;
+
+ printf("\n");
+ fclose(f);
+ }
+ } while (++optind < argc);
+ }
+
+ my_exit(ret);
+}
diff --git a/Build/source/utils/xz-4.999.9beta/src/scripts/Makefile.am b/Build/source/utils/xz-4.999.9beta/src/scripts/Makefile.am
new file mode 100644
index 00000000000..86f273884f6
--- /dev/null
+++ b/Build/source/utils/xz-4.999.9beta/src/scripts/Makefile.am
@@ -0,0 +1,65 @@
+##
+## Author: Lasse Collin
+##
+## This file has been put into the public domain.
+## You can do whatever you want with this file.
+##
+
+nodist_bin_SCRIPTS = xzdiff xzgrep xzmore xzless
+dist_man_MANS = xzdiff.1 xzgrep.1 xzmore.1 xzless.1
+
+install-exec-hook:
+ cd $(DESTDIR)$(bindir) && \
+ target=`echo xzdiff | sed '$(transform)'` && \
+ for name in xzcmp lzdiff lzcmp; do \
+ link=`echo $$name | sed '$(transform)'` && \
+ rm -f $$link && \
+ $(LN_S) $$target $$link; \
+ done && \
+ target=`echo xzgrep | sed '$(transform)'` && \
+ for name in xzegrep xzfgrep lzgrep lzegrep lzfgrep; do \
+ link=`echo $$name | sed '$(transform)'` && \
+ rm -f $$link && \
+ $(LN_S) $$target $$link; \
+ done && \
+ for name in xzmore xzless; do \
+ target=`echo $$name | sed '$(transform)'` && \
+ link=`echo $$name | sed 's/xz/lz/;$(transform)'` && \
+ rm -f $$link && \
+ $(LN_S) $$target $$link; \
+ done
+
+install-data-hook:
+ cd $(DESTDIR)$(mandir)/man1 && \
+ target=`echo xzdiff | sed '$(transform)'` && \
+ for name in xzcmp lzdiff lzcmp; do \
+ link=`echo $$name | sed '$(transform)'` && \
+ rm -f $$link.1 && \
+ $(LN_S) $$target.1 $$link.1; \
+ done && \
+ target=`echo xzgrep | sed '$(transform)'` && \
+ for name in xzegrep xzfgrep lzgrep lzegrep lzfgrep; do \
+ link=`echo $$name | sed '$(transform)'` && \
+ rm -f $$link.1 && \
+ $(LN_S) $$target.1 $$link.1; \
+ done && \
+ for name in xzmore xzless; do \
+ target=`echo $$name | sed '$(transform)'` && \
+ link=`echo $$name | sed 's/xz/lz/;$(transform)'` && \
+ rm -f $$link.1 && \
+ $(LN_S) $$target.1 $$link.1; \
+ done
+
+uninstall-hook:
+ cd $(DESTDIR)$(bindir) && \
+ for name in xzcmp lzdiff lzcmp xzegrep xzfgrep \
+ lzgrep lzegrep lzfgrep lzmore lzless; do \
+ link=`echo $$name | sed '$(transform)'` && \
+ rm -f $$link; \
+ done
+ cd $(DESTDIR)$(mandir)/man1 && \
+ for name in xzcmp lzdiff lzcmp xzegrep xzfgrep \
+ lzgrep lzegrep lzfgrep lzmore lzless; do \
+ link=`echo $$name | sed '$(transform)'` && \
+ rm -f $$link.1; \
+ done
diff --git a/Build/source/utils/xz-4.999.9beta/src/scripts/Makefile.in b/Build/source/utils/xz-4.999.9beta/src/scripts/Makefile.in
new file mode 100644
index 00000000000..66e23b3846a
--- /dev/null
+++ b/Build/source/utils/xz-4.999.9beta/src/scripts/Makefile.in
@@ -0,0 +1,586 @@
+# Makefile.in generated by automake 1.11 from Makefile.am.
+# @configure_input@
+
+# Copyright (C) 1994, 1995, 1996, 1997, 1998, 1999, 2000, 2001, 2002,
+# 2003, 2004, 2005, 2006, 2007, 2008, 2009 Free Software Foundation,
+# Inc.
+# This Makefile.in is free software; the Free Software Foundation
+# gives unlimited permission to copy and/or distribute it,
+# with or without modifications, as long as this notice is preserved.
+
+# This program is distributed in the hope that it will be useful,
+# but WITHOUT ANY WARRANTY, to the extent permitted by law; without
+# even the implied warranty of MERCHANTABILITY or FITNESS FOR A
+# PARTICULAR PURPOSE.
+
+@SET_MAKE@
+
+VPATH = @srcdir@
+pkgdatadir = $(datadir)/@PACKAGE@
+pkgincludedir = $(includedir)/@PACKAGE@
+pkglibdir = $(libdir)/@PACKAGE@
+pkglibexecdir = $(libexecdir)/@PACKAGE@
+am__cd = CDPATH="$${ZSH_VERSION+.}$(PATH_SEPARATOR)" && cd
+install_sh_DATA = $(install_sh) -c -m 644
+install_sh_PROGRAM = $(install_sh) -c
+install_sh_SCRIPT = $(install_sh) -c
+INSTALL_HEADER = $(INSTALL_DATA)
+transform = $(program_transform_name)
+NORMAL_INSTALL = :
+PRE_INSTALL = :
+POST_INSTALL = :
+NORMAL_UNINSTALL = :
+PRE_UNINSTALL = :
+POST_UNINSTALL = :
+build_triplet = @build@
+host_triplet = @host@
+subdir = src/scripts
+DIST_COMMON = $(dist_man_MANS) $(srcdir)/Makefile.am \
+ $(srcdir)/Makefile.in $(srcdir)/xzdiff.in $(srcdir)/xzgrep.in \
+ $(srcdir)/xzless.in $(srcdir)/xzmore.in
+ACLOCAL_M4 = $(top_srcdir)/aclocal.m4
+am__aclocal_m4_deps = $(top_srcdir)/m4/acx_pthread.m4 \
+ $(top_srcdir)/m4/getopt.m4 $(top_srcdir)/m4/gettext.m4 \
+ $(top_srcdir)/m4/iconv.m4 $(top_srcdir)/m4/lc_cpucores.m4 \
+ $(top_srcdir)/m4/lc_physmem.m4 $(top_srcdir)/m4/lib-ld.m4 \
+ $(top_srcdir)/m4/lib-link.m4 $(top_srcdir)/m4/lib-prefix.m4 \
+ $(top_srcdir)/m4/libtool.m4 $(top_srcdir)/m4/ltoptions.m4 \
+ $(top_srcdir)/m4/ltsugar.m4 $(top_srcdir)/m4/ltversion.m4 \
+ $(top_srcdir)/m4/lt~obsolete.m4 $(top_srcdir)/m4/nls.m4 \
+ $(top_srcdir)/m4/po.m4 $(top_srcdir)/m4/posix-shell.m4 \
+ $(top_srcdir)/m4/progtest.m4 $(top_srcdir)/m4/visibility.m4 \
+ $(top_srcdir)/configure.ac
+am__configure_deps = $(am__aclocal_m4_deps) $(CONFIGURE_DEPENDENCIES) \
+ $(ACLOCAL_M4)
+mkinstalldirs = $(install_sh) -d
+CONFIG_HEADER = $(top_builddir)/config.h
+CONFIG_CLEAN_FILES = xzdiff xzgrep xzmore xzless
+CONFIG_CLEAN_VPATH_FILES =
+am__vpath_adj_setup = srcdirstrip=`echo "$(srcdir)" | sed 's|.|.|g'`;
+am__vpath_adj = case $$p in \
+ $(srcdir)/*) f=`echo "$$p" | sed "s|^$$srcdirstrip/||"`;; \
+ *) f=$$p;; \
+ esac;
+am__strip_dir = f=`echo $$p | sed -e 's|^.*/||'`;
+am__install_max = 40
+am__nobase_strip_setup = \
+ srcdirstrip=`echo "$(srcdir)" | sed 's/[].[^$$\\*|]/\\\\&/g'`
+am__nobase_strip = \
+ for p in $$list; do echo "$$p"; done | sed -e "s|$$srcdirstrip/||"
+am__nobase_list = $(am__nobase_strip_setup); \
+ for p in $$list; do echo "$$p $$p"; done | \
+ sed "s| $$srcdirstrip/| |;"' / .*\//!s/ .*/ ./; s,\( .*\)/[^/]*$$,\1,' | \
+ $(AWK) 'BEGIN { files["."] = "" } { files[$$2] = files[$$2] " " $$1; \
+ if (++n[$$2] == $(am__install_max)) \
+ { print $$2, files[$$2]; n[$$2] = 0; files[$$2] = "" } } \
+ END { for (dir in files) print dir, files[dir] }'
+am__base_list = \
+ sed '$$!N;$$!N;$$!N;$$!N;$$!N;$$!N;$$!N;s/\n/ /g' | \
+ sed '$$!N;$$!N;$$!N;$$!N;s/\n/ /g'
+am__installdirs = "$(DESTDIR)$(bindir)" "$(DESTDIR)$(man1dir)"
+SCRIPTS = $(nodist_bin_SCRIPTS)
+SOURCES =
+DIST_SOURCES =
+man1dir = $(mandir)/man1
+NROFF = nroff
+MANS = $(dist_man_MANS)
+DISTFILES = $(DIST_COMMON) $(DIST_SOURCES) $(TEXINFOS) $(EXTRA_DIST)
+ACLOCAL = @ACLOCAL@
+AMTAR = @AMTAR@
+AM_CFLAGS = @AM_CFLAGS@
+AR = @AR@
+AS = @AS@
+AUTOCONF = @AUTOCONF@
+AUTOHEADER = @AUTOHEADER@
+AUTOMAKE = @AUTOMAKE@
+AWK = @AWK@
+CC = @CC@
+CCAS = @CCAS@
+CCASDEPMODE = @CCASDEPMODE@
+CCASFLAGS = @CCASFLAGS@
+CCDEPMODE = @CCDEPMODE@
+CFLAGS = @CFLAGS@
+CFLAG_VISIBILITY = @CFLAG_VISIBILITY@
+CPP = @CPP@
+CPPFLAGS = @CPPFLAGS@
+CYGPATH_W = @CYGPATH_W@
+DEFS = @DEFS@
+DEPDIR = @DEPDIR@
+DLLTOOL = @DLLTOOL@
+DSYMUTIL = @DSYMUTIL@
+DUMPBIN = @DUMPBIN@
+DYNAMIC_CPPFLAGS = @DYNAMIC_CPPFLAGS@
+DYNAMIC_LDFLAGS = @DYNAMIC_LDFLAGS@
+ECHO_C = @ECHO_C@
+ECHO_N = @ECHO_N@
+ECHO_T = @ECHO_T@
+EGREP = @EGREP@
+EXEEXT = @EXEEXT@
+FGREP = @FGREP@
+GETOPT_H = @GETOPT_H@
+GMSGFMT = @GMSGFMT@
+GMSGFMT_015 = @GMSGFMT_015@
+GREP = @GREP@
+HAVE_VISIBILITY = @HAVE_VISIBILITY@
+INSTALL = @INSTALL@
+INSTALL_DATA = @INSTALL_DATA@
+INSTALL_PROGRAM = @INSTALL_PROGRAM@
+INSTALL_SCRIPT = @INSTALL_SCRIPT@
+INSTALL_STRIP_PROGRAM = @INSTALL_STRIP_PROGRAM@
+INTLLIBS = @INTLLIBS@
+INTL_MACOSX_LIBS = @INTL_MACOSX_LIBS@
+LD = @LD@
+LDFLAGS = @LDFLAGS@
+LIBICONV = @LIBICONV@
+LIBINTL = @LIBINTL@
+LIBOBJS = @LIBOBJS@
+LIBS = @LIBS@
+LIBTOOL = @LIBTOOL@
+LIPO = @LIPO@
+LN_S = @LN_S@
+LTLIBICONV = @LTLIBICONV@
+LTLIBINTL = @LTLIBINTL@
+LTLIBOBJS = @LTLIBOBJS@
+MAKEINFO = @MAKEINFO@
+MKDIR_P = @MKDIR_P@
+MSGFMT = @MSGFMT@
+MSGFMT_015 = @MSGFMT_015@
+MSGMERGE = @MSGMERGE@
+NM = @NM@
+NMEDIT = @NMEDIT@
+OBJDUMP = @OBJDUMP@
+OBJEXT = @OBJEXT@
+OTOOL = @OTOOL@
+OTOOL64 = @OTOOL64@
+PACKAGE = @PACKAGE@
+PACKAGE_BUGREPORT = @PACKAGE_BUGREPORT@
+PACKAGE_HOMEPAGE = @PACKAGE_HOMEPAGE@
+PACKAGE_NAME = @PACKAGE_NAME@
+PACKAGE_STRING = @PACKAGE_STRING@
+PACKAGE_TARNAME = @PACKAGE_TARNAME@
+PACKAGE_URL = @PACKAGE_URL@
+PACKAGE_VERSION = @PACKAGE_VERSION@
+PATH_SEPARATOR = @PATH_SEPARATOR@
+POSIX_SHELL = @POSIX_SHELL@
+POSUB = @POSUB@
+PREFERABLY_POSIX_SHELL = @PREFERABLY_POSIX_SHELL@
+PTHREAD_CC = @PTHREAD_CC@
+PTHREAD_CFLAGS = @PTHREAD_CFLAGS@
+PTHREAD_LIBS = @PTHREAD_LIBS@
+RANLIB = @RANLIB@
+RC = @RC@
+SED = @SED@
+SET_MAKE = @SET_MAKE@
+SHELL = @SHELL@
+STATIC_CPPFLAGS = @STATIC_CPPFLAGS@
+STATIC_LDFLAGS = @STATIC_LDFLAGS@
+STRIP = @STRIP@
+USE_NLS = @USE_NLS@
+VERSION = @VERSION@
+XGETTEXT = @XGETTEXT@
+XGETTEXT_015 = @XGETTEXT_015@
+abs_builddir = @abs_builddir@
+abs_srcdir = @abs_srcdir@
+abs_top_builddir = @abs_top_builddir@
+abs_top_srcdir = @abs_top_srcdir@
+ac_ct_CC = @ac_ct_CC@
+ac_ct_DUMPBIN = @ac_ct_DUMPBIN@
+acx_pthread_config = @acx_pthread_config@
+am__include = @am__include@
+am__leading_dot = @am__leading_dot@
+am__quote = @am__quote@
+am__tar = @am__tar@
+am__untar = @am__untar@
+bindir = @bindir@
+build = @build@
+build_alias = @build_alias@
+build_cpu = @build_cpu@
+build_os = @build_os@
+build_vendor = @build_vendor@
+builddir = @builddir@
+datadir = @datadir@
+datarootdir = @datarootdir@
+docdir = @docdir@
+dvidir = @dvidir@
+exec_prefix = @exec_prefix@
+host = @host@
+host_alias = @host_alias@
+host_cpu = @host_cpu@
+host_os = @host_os@
+host_vendor = @host_vendor@
+htmldir = @htmldir@
+includedir = @includedir@
+infodir = @infodir@
+install_sh = @install_sh@
+libdir = @libdir@
+libexecdir = @libexecdir@
+localedir = @localedir@
+localstatedir = @localstatedir@
+lt_ECHO = @lt_ECHO@
+mandir = @mandir@
+mkdir_p = @mkdir_p@
+oldincludedir = @oldincludedir@
+pdfdir = @pdfdir@
+prefix = @prefix@
+program_transform_name = @program_transform_name@
+psdir = @psdir@
+sbindir = @sbindir@
+sharedstatedir = @sharedstatedir@
+srcdir = @srcdir@
+sysconfdir = @sysconfdir@
+target_alias = @target_alias@
+top_build_prefix = @top_build_prefix@
+top_builddir = @top_builddir@
+top_srcdir = @top_srcdir@
+xz = @xz@
+nodist_bin_SCRIPTS = xzdiff xzgrep xzmore xzless
+dist_man_MANS = xzdiff.1 xzgrep.1 xzmore.1 xzless.1
+all: all-am
+
+.SUFFIXES:
+$(srcdir)/Makefile.in: $(srcdir)/Makefile.am $(am__configure_deps)
+ @for dep in $?; do \
+ case '$(am__configure_deps)' in \
+ *$$dep*) \
+ ( cd $(top_builddir) && $(MAKE) $(AM_MAKEFLAGS) am--refresh ) \
+ && { if test -f $@; then exit 0; else break; fi; }; \
+ exit 1;; \
+ esac; \
+ done; \
+ echo ' cd $(top_srcdir) && $(AUTOMAKE) --foreign src/scripts/Makefile'; \
+ $(am__cd) $(top_srcdir) && \
+ $(AUTOMAKE) --foreign src/scripts/Makefile
+.PRECIOUS: Makefile
+Makefile: $(srcdir)/Makefile.in $(top_builddir)/config.status
+ @case '$?' in \
+ *config.status*) \
+ cd $(top_builddir) && $(MAKE) $(AM_MAKEFLAGS) am--refresh;; \
+ *) \
+ echo ' cd $(top_builddir) && $(SHELL) ./config.status $(subdir)/$@ $(am__depfiles_maybe)'; \
+ cd $(top_builddir) && $(SHELL) ./config.status $(subdir)/$@ $(am__depfiles_maybe);; \
+ esac;
+
+$(top_builddir)/config.status: $(top_srcdir)/configure $(CONFIG_STATUS_DEPENDENCIES)
+ cd $(top_builddir) && $(MAKE) $(AM_MAKEFLAGS) am--refresh
+
+$(top_srcdir)/configure: $(am__configure_deps)
+ cd $(top_builddir) && $(MAKE) $(AM_MAKEFLAGS) am--refresh
+$(ACLOCAL_M4): $(am__aclocal_m4_deps)
+ cd $(top_builddir) && $(MAKE) $(AM_MAKEFLAGS) am--refresh
+$(am__aclocal_m4_deps):
+xzdiff: $(top_builddir)/config.status $(srcdir)/xzdiff.in
+ cd $(top_builddir) && $(SHELL) ./config.status $(subdir)/$@
+xzgrep: $(top_builddir)/config.status $(srcdir)/xzgrep.in
+ cd $(top_builddir) && $(SHELL) ./config.status $(subdir)/$@
+xzmore: $(top_builddir)/config.status $(srcdir)/xzmore.in
+ cd $(top_builddir) && $(SHELL) ./config.status $(subdir)/$@
+xzless: $(top_builddir)/config.status $(srcdir)/xzless.in
+ cd $(top_builddir) && $(SHELL) ./config.status $(subdir)/$@
+install-nodist_binSCRIPTS: $(nodist_bin_SCRIPTS)
+ @$(NORMAL_INSTALL)
+ test -z "$(bindir)" || $(MKDIR_P) "$(DESTDIR)$(bindir)"
+ @list='$(nodist_bin_SCRIPTS)'; test -n "$(bindir)" || list=; \
+ for p in $$list; do \
+ if test -f "$$p"; then d=; else d="$(srcdir)/"; fi; \
+ if test -f "$$d$$p"; then echo "$$d$$p"; echo "$$p"; else :; fi; \
+ done | \
+ sed -e 'p;s,.*/,,;n' \
+ -e 'h;s|.*|.|' \
+ -e 'p;x;s,.*/,,;$(transform)' | sed 'N;N;N;s,\n, ,g' | \
+ $(AWK) 'BEGIN { files["."] = ""; dirs["."] = 1; } \
+ { d=$$3; if (dirs[d] != 1) { print "d", d; dirs[d] = 1 } \
+ if ($$2 == $$4) { files[d] = files[d] " " $$1; \
+ if (++n[d] == $(am__install_max)) { \
+ print "f", d, files[d]; n[d] = 0; files[d] = "" } } \
+ else { print "f", d "/" $$4, $$1 } } \
+ END { for (d in files) print "f", d, files[d] }' | \
+ while read type dir files; do \
+ if test "$$dir" = .; then dir=; else dir=/$$dir; fi; \
+ test -z "$$files" || { \
+ echo " $(INSTALL_SCRIPT) $$files '$(DESTDIR)$(bindir)$$dir'"; \
+ $(INSTALL_SCRIPT) $$files "$(DESTDIR)$(bindir)$$dir" || exit $$?; \
+ } \
+ ; done
+
+uninstall-nodist_binSCRIPTS:
+ @$(NORMAL_UNINSTALL)
+ @list='$(nodist_bin_SCRIPTS)'; test -n "$(bindir)" || exit 0; \
+ files=`for p in $$list; do echo "$$p"; done | \
+ sed -e 's,.*/,,;$(transform)'`; \
+ test -n "$$list" || exit 0; \
+ echo " ( cd '$(DESTDIR)$(bindir)' && rm -f" $$files ")"; \
+ cd "$(DESTDIR)$(bindir)" && rm -f $$files
+
+mostlyclean-libtool:
+ -rm -f *.lo
+
+clean-libtool:
+ -rm -rf .libs _libs
+install-man1: $(dist_man_MANS)
+ @$(NORMAL_INSTALL)
+ test -z "$(man1dir)" || $(MKDIR_P) "$(DESTDIR)$(man1dir)"
+ @list=''; test -n "$(man1dir)" || exit 0; \
+ { for i in $$list; do echo "$$i"; done; \
+ l2='$(dist_man_MANS)'; for i in $$l2; do echo "$$i"; done | \
+ sed -n '/\.1[a-z]*$$/p'; \
+ } | while read p; do \
+ if test -f $$p; then d=; else d="$(srcdir)/"; fi; \
+ echo "$$d$$p"; echo "$$p"; \
+ done | \
+ sed -e 'n;s,.*/,,;p;h;s,.*\.,,;s,^[^1][0-9a-z]*$$,1,;x' \
+ -e 's,\.[0-9a-z]*$$,,;$(transform);G;s,\n,.,' | \
+ sed 'N;N;s,\n, ,g' | { \
+ list=; while read file base inst; do \
+ if test "$$base" = "$$inst"; then list="$$list $$file"; else \
+ echo " $(INSTALL_DATA) '$$file' '$(DESTDIR)$(man1dir)/$$inst'"; \
+ $(INSTALL_DATA) "$$file" "$(DESTDIR)$(man1dir)/$$inst" || exit $$?; \
+ fi; \
+ done; \
+ for i in $$list; do echo "$$i"; done | $(am__base_list) | \
+ while read files; do \
+ test -z "$$files" || { \
+ echo " $(INSTALL_DATA) $$files '$(DESTDIR)$(man1dir)'"; \
+ $(INSTALL_DATA) $$files "$(DESTDIR)$(man1dir)" || exit $$?; }; \
+ done; }
+
+uninstall-man1:
+ @$(NORMAL_UNINSTALL)
+ @list=''; test -n "$(man1dir)" || exit 0; \
+ files=`{ for i in $$list; do echo "$$i"; done; \
+ l2='$(dist_man_MANS)'; for i in $$l2; do echo "$$i"; done | \
+ sed -n '/\.1[a-z]*$$/p'; \
+ } | sed -e 's,.*/,,;h;s,.*\.,,;s,^[^1][0-9a-z]*$$,1,;x' \
+ -e 's,\.[0-9a-z]*$$,,;$(transform);G;s,\n,.,'`; \
+ test -z "$$files" || { \
+ echo " ( cd '$(DESTDIR)$(man1dir)' && rm -f" $$files ")"; \
+ cd "$(DESTDIR)$(man1dir)" && rm -f $$files; }
+tags: TAGS
+TAGS:
+
+ctags: CTAGS
+CTAGS:
+
+
+distdir: $(DISTFILES)
+ @list='$(MANS)'; if test -n "$$list"; then \
+ list=`for p in $$list; do \
+ if test -f $$p; then d=; else d="$(srcdir)/"; fi; \
+ if test -f "$$d$$p"; then echo "$$d$$p"; else :; fi; done`; \
+ if test -n "$$list" && \
+ grep 'ab help2man is required to generate this page' $$list >/dev/null; then \
+ echo "error: found man pages containing the \`missing help2man' replacement text:" >&2; \
+ grep -l 'ab help2man is required to generate this page' $$list | sed 's/^/ /' >&2; \
+ echo " to fix them, install help2man, remove and regenerate the man pages;" >&2; \
+ echo " typically \`make maintainer-clean' will remove them" >&2; \
+ exit 1; \
+ else :; fi; \
+ else :; fi
+ @srcdirstrip=`echo "$(srcdir)" | sed 's/[].[^$$\\*]/\\\\&/g'`; \
+ topsrcdirstrip=`echo "$(top_srcdir)" | sed 's/[].[^$$\\*]/\\\\&/g'`; \
+ list='$(DISTFILES)'; \
+ dist_files=`for file in $$list; do echo $$file; done | \
+ sed -e "s|^$$srcdirstrip/||;t" \
+ -e "s|^$$topsrcdirstrip/|$(top_builddir)/|;t"`; \
+ case $$dist_files in \
+ */*) $(MKDIR_P) `echo "$$dist_files" | \
+ sed '/\//!d;s|^|$(distdir)/|;s,/[^/]*$$,,' | \
+ sort -u` ;; \
+ esac; \
+ for file in $$dist_files; do \
+ if test -f $$file || test -d $$file; then d=.; else d=$(srcdir); fi; \
+ if test -d $$d/$$file; then \
+ dir=`echo "/$$file" | sed -e 's,/[^/]*$$,,'`; \
+ if test -d "$(distdir)/$$file"; then \
+ find "$(distdir)/$$file" -type d ! -perm -700 -exec chmod u+rwx {} \;; \
+ fi; \
+ if test -d $(srcdir)/$$file && test $$d != $(srcdir); then \
+ cp -fpR $(srcdir)/$$file "$(distdir)$$dir" || exit 1; \
+ find "$(distdir)/$$file" -type d ! -perm -700 -exec chmod u+rwx {} \;; \
+ fi; \
+ cp -fpR $$d/$$file "$(distdir)$$dir" || exit 1; \
+ else \
+ test -f "$(distdir)/$$file" \
+ || cp -p $$d/$$file "$(distdir)/$$file" \
+ || exit 1; \
+ fi; \
+ done
+check-am: all-am
+check: check-am
+all-am: Makefile $(SCRIPTS) $(MANS)
+installdirs:
+ for dir in "$(DESTDIR)$(bindir)" "$(DESTDIR)$(man1dir)"; do \
+ test -z "$$dir" || $(MKDIR_P) "$$dir"; \
+ done
+install: install-am
+install-exec: install-exec-am
+install-data: install-data-am
+uninstall: uninstall-am
+
+install-am: all-am
+ @$(MAKE) $(AM_MAKEFLAGS) install-exec-am install-data-am
+
+installcheck: installcheck-am
+install-strip:
+ $(MAKE) $(AM_MAKEFLAGS) INSTALL_PROGRAM="$(INSTALL_STRIP_PROGRAM)" \
+ install_sh_PROGRAM="$(INSTALL_STRIP_PROGRAM)" INSTALL_STRIP_FLAG=-s \
+ `test -z '$(STRIP)' || \
+ echo "INSTALL_PROGRAM_ENV=STRIPPROG='$(STRIP)'"` install
+mostlyclean-generic:
+
+clean-generic:
+
+distclean-generic:
+ -test -z "$(CONFIG_CLEAN_FILES)" || rm -f $(CONFIG_CLEAN_FILES)
+ -test . = "$(srcdir)" || test -z "$(CONFIG_CLEAN_VPATH_FILES)" || rm -f $(CONFIG_CLEAN_VPATH_FILES)
+
+maintainer-clean-generic:
+ @echo "This command is intended for maintainers to use"
+ @echo "it deletes files that may require special tools to rebuild."
+clean: clean-am
+
+clean-am: clean-generic clean-libtool mostlyclean-am
+
+distclean: distclean-am
+ -rm -f Makefile
+distclean-am: clean-am distclean-generic
+
+dvi: dvi-am
+
+dvi-am:
+
+html: html-am
+
+html-am:
+
+info: info-am
+
+info-am:
+
+install-data-am: install-man
+ @$(NORMAL_INSTALL)
+ $(MAKE) $(AM_MAKEFLAGS) install-data-hook
+install-dvi: install-dvi-am
+
+install-dvi-am:
+
+install-exec-am: install-nodist_binSCRIPTS
+ @$(NORMAL_INSTALL)
+ $(MAKE) $(AM_MAKEFLAGS) install-exec-hook
+install-html: install-html-am
+
+install-html-am:
+
+install-info: install-info-am
+
+install-info-am:
+
+install-man: install-man1
+
+install-pdf: install-pdf-am
+
+install-pdf-am:
+
+install-ps: install-ps-am
+
+install-ps-am:
+
+installcheck-am:
+
+maintainer-clean: maintainer-clean-am
+ -rm -f Makefile
+maintainer-clean-am: distclean-am maintainer-clean-generic
+
+mostlyclean: mostlyclean-am
+
+mostlyclean-am: mostlyclean-generic mostlyclean-libtool
+
+pdf: pdf-am
+
+pdf-am:
+
+ps: ps-am
+
+ps-am:
+
+uninstall-am: uninstall-man uninstall-nodist_binSCRIPTS
+ @$(NORMAL_INSTALL)
+ $(MAKE) $(AM_MAKEFLAGS) uninstall-hook
+uninstall-man: uninstall-man1
+
+.MAKE: install-am install-data-am install-exec-am install-strip \
+ uninstall-am
+
+.PHONY: all all-am check check-am clean clean-generic clean-libtool \
+ distclean distclean-generic distclean-libtool distdir dvi \
+ dvi-am html html-am info info-am install install-am \
+ install-data install-data-am install-data-hook install-dvi \
+ install-dvi-am install-exec install-exec-am install-exec-hook \
+ install-html install-html-am install-info install-info-am \
+ install-man install-man1 install-nodist_binSCRIPTS install-pdf \
+ install-pdf-am install-ps install-ps-am install-strip \
+ installcheck installcheck-am installdirs maintainer-clean \
+ maintainer-clean-generic mostlyclean mostlyclean-generic \
+ mostlyclean-libtool pdf pdf-am ps ps-am uninstall uninstall-am \
+ uninstall-hook uninstall-man uninstall-man1 \
+ uninstall-nodist_binSCRIPTS
+
+
+install-exec-hook:
+ cd $(DESTDIR)$(bindir) && \
+ target=`echo xzdiff | sed '$(transform)'` && \
+ for name in xzcmp lzdiff lzcmp; do \
+ link=`echo $$name | sed '$(transform)'` && \
+ rm -f $$link && \
+ $(LN_S) $$target $$link; \
+ done && \
+ target=`echo xzgrep | sed '$(transform)'` && \
+ for name in xzegrep xzfgrep lzgrep lzegrep lzfgrep; do \
+ link=`echo $$name | sed '$(transform)'` && \
+ rm -f $$link && \
+ $(LN_S) $$target $$link; \
+ done && \
+ for name in xzmore xzless; do \
+ target=`echo $$name | sed '$(transform)'` && \
+ link=`echo $$name | sed 's/xz/lz/;$(transform)'` && \
+ rm -f $$link && \
+ $(LN_S) $$target $$link; \
+ done
+
+install-data-hook:
+ cd $(DESTDIR)$(mandir)/man1 && \
+ target=`echo xzdiff | sed '$(transform)'` && \
+ for name in xzcmp lzdiff lzcmp; do \
+ link=`echo $$name | sed '$(transform)'` && \
+ rm -f $$link.1 && \
+ $(LN_S) $$target.1 $$link.1; \
+ done && \
+ target=`echo xzgrep | sed '$(transform)'` && \
+ for name in xzegrep xzfgrep lzgrep lzegrep lzfgrep; do \
+ link=`echo $$name | sed '$(transform)'` && \
+ rm -f $$link.1 && \
+ $(LN_S) $$target.1 $$link.1; \
+ done && \
+ for name in xzmore xzless; do \
+ target=`echo $$name | sed '$(transform)'` && \
+ link=`echo $$name | sed 's/xz/lz/;$(transform)'` && \
+ rm -f $$link.1 && \
+ $(LN_S) $$target.1 $$link.1; \
+ done
+
+uninstall-hook:
+ cd $(DESTDIR)$(bindir) && \
+ for name in xzcmp lzdiff lzcmp xzegrep xzfgrep \
+ lzgrep lzegrep lzfgrep lzmore lzless; do \
+ link=`echo $$name | sed '$(transform)'` && \
+ rm -f $$link; \
+ done
+ cd $(DESTDIR)$(mandir)/man1 && \
+ for name in xzcmp lzdiff lzcmp xzegrep xzfgrep \
+ lzgrep lzegrep lzfgrep lzmore lzless; do \
+ link=`echo $$name | sed '$(transform)'` && \
+ rm -f $$link.1; \
+ done
+
+# Tell versions [3.59,3.63) of GNU make to not export all variables.
+# Otherwise a system limit (for SysV at least) may be exceeded.
+.NOEXPORT:
diff --git a/Build/source/utils/xz-4.999.9beta/src/scripts/xzdiff.1 b/Build/source/utils/xz-4.999.9beta/src/scripts/xzdiff.1
new file mode 100644
index 00000000000..252d1cd303d
--- /dev/null
+++ b/Build/source/utils/xz-4.999.9beta/src/scripts/xzdiff.1
@@ -0,0 +1,74 @@
+.\"
+.\" Original zdiff.1 for gzip: Jean-loup Gailly
+.\"
+.\" Modifications for XZ Utils: Lasse Collin
+.\" Andrew Dudman
+.\"
+.\" License: GNU GPLv2+
+.\"
+.TH XZDIFF 1 "2009-07-05" "Tukaani" "XZ Utils"
+.SH NAME
+xzcmp, xzdiff, lzcmp, lzdiff \- compare compressed files
+.SH SYNOPSIS
+.B xzcmp
+.RI [ cmp_options "] " file1 " [" file2 ]
+.br
+.B xzdiff
+.RI [ diff_options "] " file1 " [" file2 ]
+.br
+.B lzcmp
+.RI [ cmp_options "] " file1 " [" file2 ]
+.br
+.B lzdiff
+.RI [ diff_options "] " file1 " [" file2 ]
+.SH DESCRIPTION
+.B xzcmp
+and
+.B xdiff
+invoke
+.BR cmp (1)
+or
+.BR diff (1)
+on files compressed with
+.BR xz (1),
+.BR lzma (1),
+.BR gzip (1),
+or
+.BR bzip2 (1).
+All options specified are passed directly to
+.B cmp
+or
+.BR diff .
+If only one file is specified, then the files compared are
+.I file1
+(which must have a suffix of a supported compression format) and
+.I file1
+from which the compression format suffix has been stripped.
+If two files are specified, then they are uncompressed if necessary and fed to
+.BR cmp (1)
+or
+.BR diff (1).
+The exit status from
+.B cmp
+or
+.B diff
+is preserved.
+.PP
+The names
+.B lzcmp
+and
+.B lzdiff
+are provided for backward compatibility with LZMA Utils.
+.SH "SEE ALSO"
+.BR cmp (1),
+.BR diff (1),
+.BR xz (1),
+.BR gzip (1),
+.BR bzip2 (1),
+.BR zdiff (1)
+.SH BUGS
+Messages from the
+.BR cmp (1)
+or
+.BR diff (1)
+programs refer to temporary filenames instead of those specified.
diff --git a/Build/source/utils/xz-4.999.9beta/src/scripts/xzdiff.in b/Build/source/utils/xz-4.999.9beta/src/scripts/xzdiff.in
new file mode 100644
index 00000000000..2d6e5da4760
--- /dev/null
+++ b/Build/source/utils/xz-4.999.9beta/src/scripts/xzdiff.in
@@ -0,0 +1,172 @@
+#!@POSIX_SHELL@
+
+# Copyright (C) 1998, 2002, 2006, 2007 Free Software Foundation
+# Copyright (C) 1993 Jean-loup Gailly
+
+# Modified for XZ Utils by Andrew Dudman and Lasse Collin.
+
+# This program is free software; you can redistribute it and/or modify
+# it under the terms of the GNU General Public License as published by
+# the Free Software Foundation; either version 2 of the License, or
+# (at your option) any later version.
+
+# This program is distributed in the hope that it will be useful,
+# but WITHOUT ANY WARRANTY; without even the implied warranty of
+# MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+# GNU General Public License for more details.
+
+#SET_PATH - This line is a placeholder to ease patching this script.
+
+# Instead of unsetting XZ_OPT, just make sure that xz will use file format
+# autodetection. This way memory usage limit and thread limit can be
+# specified via XZ_OPT. With gzip and bzip2 it's OK to just unset the
+# environment variables.
+xz='@xz@ --format=auto'
+unset GZIP BZIP BZIP2
+
+case ${0##*/} in
+ *cmp*) prog=xzcmp; cmp=${CMP:-cmp};;
+ *) prog=xzdiff; cmp=${DIFF:-diff};;
+esac
+
+version="$prog (@PACKAGE_NAME@) @VERSION@"
+
+usage="Usage: ${0##*/} [OPTION]... FILE1 [FILE2]
+Compare FILE1 to FILE2, using their uncompressed contents if they are
+compressed. If FILE2 is omitted, then the files compared are FILE1 and
+FILE1 from which the compression format suffix has been stripped.
+
+Do comparisons like '$cmp' does. OPTIONs are the same as for '$cmp'.
+
+Report bugs to <@PACKAGE_BUGREPORT@>."
+
+# sed script to escape all ' for the shell, and then (to handle trailing
+# newlines correctly) turn trailing X on last line into '.
+escape='
+ s/'\''/'\''\\'\'''\''/g
+ $s/X$/'\''/
+'
+
+while :; do
+ case $1 in
+ --h*) printf '%s\n' "$usage" || exit 2; exit;;
+ --v*) echo "$version" || exit 2; exit;;
+ --) shift; break;;
+ -*\'*) cmp="$cmp '"`printf '%sX\n' "$1" | sed "$escape"`;;
+ -?*) cmp="$cmp '$1'";;
+ *) break;;
+ esac
+ shift
+done
+cmp="$cmp --"
+
+for file; do
+ test "X$file" = X- || <"$file" || exit 2
+done
+
+xz1=$xz
+xz2=$xz
+xz_status=0
+exec 3>&1
+
+if test $# -eq 1; then
+ case $1 in
+ *[-.]xz | *[-.]lzma | *.t[lx]z)
+ ;;
+ *[-.]bz2 | *.tbz | *.tbz2)
+ xz1=$bzip2;;
+ *[-.][zZ] | *_z | *[-.]gz | *.t[ag]z)
+ xz1=$gzip;;
+ *)
+ echo >&2 "$0: $1: Unknown compressed file name suffix"
+ exit 2;;
+ esac
+ case $1 in
+ *[-.][zZ] | *_z | *[-.][gx]z | *[-.]bz2 | *[-.]lzma)
+ FILE=`expr "X$1" : 'X\(.*\)[-.][abglmxzZ2]*$'`;;
+ *.t[abglx]z)
+ FILE=`expr "X$1" : 'X\(.*[-.]t\)[abglx]z$'`ar;;
+ *.tbz2)
+ FILE=`expr "X$1" : 'X\(.*[-.]t\)bz2$'`ar;;
+ esac
+ xz_status=$(
+ exec 4>&1
+ ($xz1 -cd -- "$1" 4>&-; echo $? >&4) 3>&- | eval "$cmp" - '"$FILE"' >&3
+ )
+elif test $# -eq 2; then
+ case $1 in
+ *[-.]bz2 | *.tbz | *.tbz2) xz1=$bzip2;;
+ *[-.][zZ] | *_z | *[-.]gz | *.t[ag]z) xz1=$gzip;;
+ esac
+ case $2 in
+ *[-.]bz2 | *.tbz | *.tbz2) xz2=$bzip2;;
+ *[-.][zZ] | *_z | *[-.]gz | *.t[ag]z) xz2=$gzip;;
+ esac
+ case $1 in
+ *[-.][zZ] | *_z | *[-.][gx]z | *[-.]bz2 | *[-.]lzma | *.t[abglx]z | *.tbz2 | -)
+ case "$2" in
+ *[-.][zZ] | *_z | *[-.][gx]z | *[-.]bz2 | *[-.]lzma | *.t[abglx]z | *.tbz2 | -)
+ if test "$1$2" = --; then
+ xz_status=$(
+ exec 4>&1
+ ($xz1 -cdfq - 4>&-; echo $? >&4) 3>&- |
+ eval "$cmp" - - >&3
+ )
+ elif # Reject Solaris 8's buggy /bin/bash 2.03.
+ echo X | (echo X | eval "$cmp" /dev/fd/5 - >/dev/null 2>&1) 5<&0; then
+ xz_status=$(
+ exec 4>&1
+ ($xz1 -cdfq -- "$1" 4>&-; echo $? >&4) 3>&- |
+ ( ($xz2 -cdfq -- "$2" 4>&-; echo $? >&4) 3>&- 5<&- </dev/null |
+ eval "$cmp" /dev/fd/5 - >&3) 5<&0
+ )
+ case $xz_status in
+ *[1-9]*) xz_status=1;;
+ *) xz_status=0;;
+ esac
+ else
+ F=`expr "/$2" : '.*/\(.*\)[-.][ablmtxz2]*$'` || F=$prog
+ tmp=
+ trap '
+ test -n "$tmp" && rm -f "$tmp"
+ (exit 2); exit 2
+ ' HUP INT PIPE TERM 0
+ tmp=`mktemp -t -- "$F.XXXXXX"` || exit 2
+ $xz2 -cdfq -- "$2" > "$tmp" || exit 2
+ xz_status=$(
+ exec 4>&1
+ ($xz1 -cdfq -- "$1" 4>&-; echo $? >&4) 3>&- |
+ eval "$cmp" - '"$tmp"' >&3
+ )
+ cmp_status=$?
+ rm -f "$tmp" || xz_status=$?
+ trap - HUP INT PIPE TERM 0
+ (exit $cmp_status)
+ fi;;
+ *)
+ xz_status=$(
+ exec 4>&1
+ ($xz1 -cdfq -- "$1" 4>&-; echo $? >&4) 3>&- |
+ eval "$cmp" - '"$2"' >&3
+ );;
+ esac;;
+ *)
+ case "$2" in
+ *[-.][zZ] | *_z | *[-.][gx]z | *[-.]bz2 | *[-.]lzma | *.t[abglx]z | *.tbz2 | -)
+ xz_status=$(
+ exec 4>&1
+ ($xz2 -cdfq -- "$2" 4>&-; echo $? >&4) 3>&- |
+ eval "$cmp" '"$1"' - >&3
+ );;
+ *)
+ eval "$cmp" '"$1"' '"$2"';;
+ esac;;
+ esac
+else
+ echo >&2 "$0: Invalid number of operands; try \`${0##*/} --help' for help"
+ exit 2
+fi
+
+cmp_status=$?
+test "$xz_status" -eq 0 || exit 2
+exit $cmp_status
diff --git a/Build/source/utils/xz-4.999.9beta/src/scripts/xzgrep.1 b/Build/source/utils/xz-4.999.9beta/src/scripts/xzgrep.1
new file mode 100644
index 00000000000..996d64aee8b
--- /dev/null
+++ b/Build/source/utils/xz-4.999.9beta/src/scripts/xzgrep.1
@@ -0,0 +1,94 @@
+.\"
+.\" Original zgrep.1 for gzip: Jean-loup Gailly
+.\" Charles Levert <charles@comm.polymtl.ca>
+.\"
+.\" Modifications for XZ Utils: Lasse Collin
+.\"
+.\" License: GNU GPLv2+
+.\"
+.TH XZGREP 1 "2009-07-05" "Tukaani" "XZ Utils"
+.SH NAME
+xzgrep \- search compressed files for a regular expression
+.SH SYNOPSIS
+.B xzgrep
+.RI [ grep_options ]
+.RB [ \-e ]
+.I pattern
+.IR file ".\|.\|."
+.br
+.B xzegrep
+.RB ...
+.br
+.B xzfgrep
+.RB ...
+.br
+.B lzgrep
+.RB ...
+.br
+.B lzegrep
+.RB ...
+.br
+.B lzfgrep
+.RB ...
+.SH DESCRIPTION
+.B xzgrep
+invokes
+.BR grep (1)
+on
+.I files
+which may be either uncompressed or compressed with
+.BR xz (1),
+.BR lzma (1),
+.BR gzip (1),
+or
+.BR bzip2 (1).
+All options specified are passed directly to
+.BR grep (1).
+.PP
+If no
+.I file
+is specified, then the standard input is decompressed if necessary and fed to
+.BR grep (1).
+When reading from standard input,
+.BR gzip (1)
+and
+.BR bzip2 (1)
+compressed files are not supported.
+.PP
+If
+.B xzgrep
+is invoked as
+.B xzegrep
+or
+.B xzfgrep
+then
+.BR egrep (1)
+or
+.BR fgrep (1)
+is used instead of
+.BR grep (1).
+The same applies to names
+.BR lzgrep ,
+.BR lzegrep ,
+and
+.BR lzfgrep ,
+which are provided for backward compatibility with LZMA Utils.
+.PP
+.SH ENVIRONMENT
+.TP
+.B GREP
+If the
+.B GREP
+environment variable is set,
+.B xzgrep
+uses it instead of
+.BR grep (1),
+.BR egrep (1),
+or
+.BR fgrep (1).
+.SH "SEE ALSO"
+.BR grep (1),
+.BR xz (1),
+.BR gzip (1),
+.BR bzip2 (1),
+.BR zgrep (1)
diff --git a/Build/source/utils/xz-4.999.9beta/src/scripts/xzgrep.in b/Build/source/utils/xz-4.999.9beta/src/scripts/xzgrep.in
new file mode 100644
index 00000000000..9a9b393fcec
--- /dev/null
+++ b/Build/source/utils/xz-4.999.9beta/src/scripts/xzgrep.in
@@ -0,0 +1,196 @@
+#!@POSIX_SHELL@
+
+# xzgrep -- a wrapper around a grep program that decompresses files as needed
+# Adapted from a version sent by Charles Levert <charles@comm.polymtl.ca>
+
+# Copyright (C) 1998, 2001, 2002, 2006, 2007 Free Software Foundation
+# Copyright (C) 1993 Jean-loup Gailly
+
+# Modified for XZ Utils by Andrew Dudman and Lasse Collin.
+
+# This program is free software; you can redistribute it and/or modify
+# it under the terms of the GNU General Public License as published by
+# the Free Software Foundation; either version 2 of the License, or
+# (at your option) any later version.
+
+# This program is distributed in the hope that it will be useful,
+# but WITHOUT ANY WARRANTY; without even the implied warranty of
+# MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+# GNU General Public License for more details.
+
+#SET_PATH - This line is a placeholder to ease patching this script.
+
+# Instead of unsetting XZ_OPT, just make sure that xz will use file format
+# autodetection. This way memory usage limit and thread limit can be
+# specified via XZ_OPT. With gzip and bzip2 it's OK to just unset the
+# environment variables.
+xz='@xz@ --format=auto'
+unset GZIP BZIP BZIP2
+
+case ${0##/*} in
+ *egrep*) prog=xzegrep; grep=${GREP:-egrep};;
+ *fgrep*) prog=xzfgrep; grep=${GREP:-fgrep};;
+ *) prog=xzgrep; grep=${GREP:-grep};;
+esac
+
+version="$prog (@PACKAGE_NAME@) @VERSION@"
+
+usage="Usage: ${0##/*} [OPTION]... [-e] PATTERN [FILE]...
+Look for instances of PATTERN in the input FILEs, using their
+uncompressed contents if they are compressed.
+
+OPTIONs are the same as for '$grep'.
+
+Report bugs to <@PACKAGE_BUGREPORT@>."
+
+# sed script to escape all ' for the shell, and then (to handle trailing
+# newlines correctly) turn trailing X on last line into '.
+escape='
+ s/'\''/'\''\\'\'''\''/g
+ $s/X$/'\''/
+'
+operands=
+have_pat=0
+files_with_matches=0
+files_without_matches=0
+no_filename=0
+with_filename=0
+
+while test $# -ne 0; do
+ option=$1
+ shift
+ optarg=
+
+ case $option in
+ (-[0123456789abcdhHiIKLlnoqrRsTuUvVwxyzZ]?*)
+ arg2=-\'$(expr "X${option}X" : 'X-.[0-9]*\(.*\)' | sed "$escape")
+ eval "set -- $arg2 "'${1+"$@"}'
+ option=$(expr "X$option" : 'X\(-.[0-9]*\)');;
+ (--binary-*=* | --[lm]a*=* | --reg*=*)
+ ;;
+ (-[ABCDefm] | --binary-* | --file | --[lm]a* | --reg*)
+ case ${1?"$option option requires an argument"} in
+ (*\'*)
+ optarg=" '"$(printf '%sX\n' "$1" | sed "$escape");;
+ (*)
+ optarg=" '$1'";;
+ esac
+ shift;;
+ (--)
+ break;;
+ (-?*)
+ ;;
+ (*)
+ case $option in
+ (*\'*)
+ operands="$operands '"$(printf '%sX\n' "$option" | sed "$escape");;
+ (*)
+ operands="$operands '$option'";;
+ esac
+ ${POSIXLY_CORRECT+break}
+ continue;;
+ esac
+
+ case $option in
+ (-[drRzZ] | --di* | --exc* | --inc* | --rec* | --nu*)
+ printf >&2 '%s: %s: Option not supported\n' "$0" "$option"
+ exit 2;;
+ (-[ef]* | --file | --file=* | --reg*)
+ have_pat=1;;
+ (--h | --he | --hel | --help)
+ echo "$usage" || exit 2
+ exit;;
+ (-H | --wi | --wit | --with | --with- | --with-f | --with-fi \
+ | --with-fil | --with-file | --with-filen | --with-filena | --with-filenam \
+ | --with-filename)
+ with_filename=1
+ continue;;
+ (-l | --files-with-*)
+ files_with_matches=1;;
+ (-L | --files-witho*)
+ files_without_matches=1;;
+ (--no-f*)
+ no_filename=1;;
+ (-V | --v | --ve | --ver | --vers | --versi | --versio | --version)
+ echo "$version" || exit 2
+ exit;;
+ esac
+
+ case $option in
+ (*\'?*)
+ option=\'$(expr "X${option}X" : 'X\(.*\)' | sed "$escape");;
+ (*)
+ option="'$option'";;
+ esac
+
+ grep="$grep $option$optarg"
+done
+
+eval "set -- $operands "'${1+"$@"}'
+
+if test $have_pat -eq 0; then
+ case ${1?"Missing pattern; try \`${0##*/} --help' for help"} in
+ (*\'*)
+ grep="$grep -- '"$(printf '%sX\n' "$1" | sed "$escape");;
+ (*)
+ grep="$grep -- '$1'";;
+ esac
+ shift
+fi
+
+if test $# -eq 0; then
+ set -- -
+fi
+
+exec 3>&1
+res=0
+
+for i; do
+ case $i in
+ *[-.][zZ] | *_z | *[-.]gz | *.t[ag]z) uncompress="gzip -cdfq";;
+ *[-.]bz2 | *[-.]tbz | *.tbz2) uncompress="bzip2 -cdfq";;
+ *) uncompress="$xz -cdfq";;
+ esac
+ # Fail if xz or grep (or sed) fails.
+ xz_status=$(
+ exec 5>&1
+ (eval "$uncompress" -- "$i" 5>&-; echo $? >&5) 3>&- |
+ if test $files_with_matches -eq 1; then
+ eval "$grep" -q && { printf '%s\n' "$i" || exit 2; }
+ elif test $files_without_matches -eq 1; then
+ eval "$grep" -q || {
+ r=$?
+ if test $r -eq 1; then
+ printf '%s\n' "$i" || r=2
+ fi
+ exit $r
+ }
+ elif test $with_filename -eq 0 &&
+ { test $# -eq 1 || test $no_filename -eq 1; }; then
+ eval "$grep"
+ else
+ case $i in
+ (*'
+'* | *'&'* | *'\'* | *'|'*)
+ i=$(printf '%s\n' "$i" |
+ sed '
+ $!N
+ $s/[&\|]/\\&/g
+ $s/\n/\\n/g
+ ');;
+ esac
+ sed_script="s|^|$i:|"
+
+ # Fail if grep or sed fails.
+ r=$(
+ exec 4>&1
+ (eval "$grep" 4>&-; echo $? >&4) 3>&- | sed "$sed_script" >&3 4>&-
+ ) || r=2
+ exit $r
+ fi >&3 5>&-
+ )
+ r=$?
+ test "$xz_status" -eq 0 || test "$xz_status" -eq 2 || r=2
+ test $res -lt $r && res=$r
+done
+exit $res
diff --git a/Build/source/utils/xz-4.999.9beta/src/scripts/xzless.1 b/Build/source/utils/xz-4.999.9beta/src/scripts/xzless.1
new file mode 100644
index 00000000000..4fe4bcba970
--- /dev/null
+++ b/Build/source/utils/xz-4.999.9beta/src/scripts/xzless.1
@@ -0,0 +1,66 @@
+.\"
+.\" Authors: Andrew Dudman
+.\" Lasse Collin
+.\"
+.\" This file has been put into the public domain.
+.\" You can do whatever you want with this file.
+.\"
+.\" (Note that this file is not based on gzip's zless.1.)
+.\"
+.TH XZLESS 1 "2009-07-05" "Tukaani" "XZ Utils"
+.SH NAME
+xzless, lzless \- view xz or lzma compressed (text) files
+.SH SYNOPSIS
+.B xzless
+.RI [ file ...]
+.br
+.B lzless
+.RI [ file ...]
+.SH DESCRIPTION
+.B xzless
+is a filter that displays pagefulls of uncompressed text from compressed
+file(s) to a terminal. It works on files compressed with
+.BR xz (1)
+or
+.BR lzma (1).
+If no
+.I files
+are given,
+.B xzless
+reads from standard input.
+.PP
+.B xzless
+uses
+.BR less (1)
+as its only pager. Unlike
+.BR xzmore ,
+the choice of pagers is not alterable by an environment variable.
+Commands are based on both
+.BR more (1)
+and
+.BR vi (1),
+and allow back and forth movement and searching.
+See the
+.BR less (1)
+manual for more information.
+.PP
+The command named
+.B lzless
+is provided for backward compatibility with LZMA Utils.
+.SH ENVIRONMENT
+.TP
+.B LESSMETACHARS
+A list of characters special to the shell. Set by
+.B xzless
+unless it is already set in the environment.
+.TP
+.B LESSOPEN
+Set to a command line to invoke the
+.BR xz (1)
+decompressor for preprocessing the input files to
+.BR less (1).
+.SH "SEE ALSO"
+.BR less (1),
+.BR xz (1),
+.BR xzmore (1),
+.BR zless (1)
diff --git a/Build/source/utils/xz-4.999.9beta/src/scripts/xzless.in b/Build/source/utils/xz-4.999.9beta/src/scripts/xzless.in
new file mode 100644
index 00000000000..a3da697c590
--- /dev/null
+++ b/Build/source/utils/xz-4.999.9beta/src/scripts/xzless.in
@@ -0,0 +1,58 @@
+#!@POSIX_SHELL@
+
+# Copyright (C) 1998, 2002, 2006, 2007 Free Software Foundation
+
+# The original version for gzip was written by Paul Eggert.
+# Modified for XZ Utils by Andrew Dudman and Lasse Collin.
+
+# This program is free software; you can redistribute it and/or modify
+# it under the terms of the GNU General Public License as published by
+# the Free Software Foundation; either version 2 of the License, or
+# (at your option) any later version.
+
+# This program is distributed in the hope that it will be useful,
+# but WITHOUT ANY WARRANTY; without even the implied warranty of
+# MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+# GNU General Public License for more details.
+
+#SET_PATH - This line is a placeholder to ease patching this script.
+
+# Instead of unsetting XZ_OPT, just make sure that xz will use file format
+# autodetection. This way memory usage limit and thread limit can be
+# specified via XZ_OPT.
+xz='@xz@ --format=auto'
+
+version='xzless (@PACKAGE_NAME@) @VERSION@'
+
+usage="Usage: ${0##*/} [OPTION]... [FILE]...
+Like 'less', but operate on the uncompressed contents of xz compressed FILEs.
+
+Options are the same as for 'less'.
+
+Report bugs to <@PACKAGE_BUGREPORT@>."
+
+case $1 in
+ --help) echo "$usage" || exit 2; exit;;
+ --version) echo "$version" || exit 2; exit;;
+esac
+
+if test "${LESSMETACHARS+set}" != set; then
+ # Work around a bug in less 394 and earlier;
+ # it mishandles the metacharacters '$%=~'.
+ space=' '
+ tab=' '
+ nl='
+'
+ LESSMETACHARS="$space$tab$nl'"';*?"()<>[|&^`#\$%=~'
+fi
+
+if test "$(less -V | { read ver && echo ${ver#less }; })" -ge 429; then
+ # less 429 or later: LESSOPEN pipe will be used on
+ # standard input if $LESSOPEN begins with |-.
+ LESSOPEN="|-$xz -cdfq -- %s"
+else
+ LESSOPEN="|$xz -cdfq -- %s"
+fi
+export LESSMETACHARS LESSOPEN
+
+exec less "$@"
diff --git a/Build/source/utils/xz-4.999.9beta/src/scripts/xzmore.1 b/Build/source/utils/xz-4.999.9beta/src/scripts/xzmore.1
new file mode 100644
index 00000000000..a94e83263cf
--- /dev/null
+++ b/Build/source/utils/xz-4.999.9beta/src/scripts/xzmore.1
@@ -0,0 +1,54 @@
+.\"
+.\" Original zdiff.1 for gzip: Jean-loup Gailly
+.\" Modifications for XZ Utils: Lasse Collin
+.\"
+.\" License: GNU GPLv2+
+.\"
+.TH XZMORE 1 "2009-07-05" "Tukaani" "XZ Utils"
+.SH NAME
+xzmore, lzmore \- view xz or lzma compressed (text) files
+.SH SYNOPSIS
+.B xzmore
+.RI [ "filename ..." ]
+.br
+.B lzmore
+.RI [ "filename ..." ]
+.SH DESCRIPTION
+.B xzmore
+is a filter which allows examination of
+.BR xz (1)
+or
+.BR lzma (1)
+compressed text files one screenful at a time on a soft-copy terminal.
+.PP
+To use a pager other than the default
+.B more,
+set environment variable
+.B PAGER
+to the name of the desired program.
+The name
+.B lzmore
+is provided for backward compatibility with LZMA Utils.
+.TP
+.BR e " or " q
+When the prompt --More--(Next file:
+.IR file )
+is printed, this command causes
+.B xzmore
+to exit.
+.TP
+.B s
+When the prompt --More--(Next file:
+.IR file )
+is printed, this command causes
+.B xzmore
+to skip the next file and continue.
+.PP
+For list of keyboard commands supported while actually viewing the
+content of a file, refer to manual of the pager you use, usually
+.BR more (1).
+.SH "SEE ALSO"
+.BR more (1),
+.BR xz (1),
+.BR xzless (1),
+.BR zmore (1)
diff --git a/Build/source/utils/xz-4.999.9beta/src/scripts/xzmore.in b/Build/source/utils/xz-4.999.9beta/src/scripts/xzmore.in
new file mode 100644
index 00000000000..940d6614460
--- /dev/null
+++ b/Build/source/utils/xz-4.999.9beta/src/scripts/xzmore.in
@@ -0,0 +1,78 @@
+#!@POSIX_SHELL@
+
+# Copyright (C) 2001, 2002, 2007 Free Software Foundation
+# Copyright (C) 1992, 1993 Jean-loup Gailly
+
+# Modified for XZ Utils by Andrew Dudman and Lasse Collin.
+
+# This program is free software; you can redistribute it and/or modify
+# it under the terms of the GNU General Public License as published by
+# the Free Software Foundation; either version 2 of the License, or
+# (at your option) any later version.
+
+# This program is distributed in the hope that it will be useful,
+# but WITHOUT ANY WARRANTY; without even the implied warranty of
+# MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+# GNU General Public License for more details.
+
+#SET_PATH - This line is a placeholder to ease patching this script.
+
+# Instead of unsetting XZ_OPT, just make sure that xz will use file format
+# autodetection. This way memory usage limit and thread limit can be
+# specified via XZ_OPT.
+xz='@xz@ --format=auto'
+
+version='xzmore (@PACKAGE_NAME@) @VERSION@'
+
+usage="Usage: ${0##*/} [OPTION]... [FILE]...
+Like 'more', but operate on the uncompressed contents of xz compressed FILEs.
+
+Report bugs to <@PACKAGE_BUGREPORT@>."
+
+case $1 in
+ --help) echo "$usage" || exit 2; exit;;
+ --version) echo "$version" || exit 2; exit;;
+esac
+
+oldtty=`stty -g 2>/dev/null`
+if stty -cbreak 2>/dev/null; then
+ cb='cbreak'; ncb='-cbreak'
+else
+ # 'stty min 1' resets eof to ^a on both SunOS and SysV!
+ cb='min 1 -icanon'; ncb='icanon eof ^d'
+fi
+if test $? -eq 0 && test -n "$oldtty"; then
+ trap 'stty $oldtty 2>/dev/null; exit' 0 2 3 5 10 13 15
+else
+ trap 'stty $ncb echo 2>/dev/null; exit' 0 2 3 5 10 13 15
+fi
+
+if test $# = 0; then
+ if test -t 0; then
+ echo "$usage"; exit 1
+ else
+ $xz -cdfq | eval "${PAGER:-more}"
+ fi
+else
+ FIRST=1
+ for FILE; do
+ < "$FILE" || continue
+ if test $FIRST -eq 0; then
+ printf "%s--More--(Next file: %s)" "" "$FILE"
+ stty $cb -echo 2>/dev/null
+ ANS=`dd bs=1 count=1 2>/dev/null`
+ stty $ncb echo 2>/dev/null
+ echo " "
+ case "$ANS" in
+ [eq]) exit;;
+ esac
+ fi
+ if test "$ANS" != 's'; then
+ echo "------> $FILE <------"
+ $xz -cdfq -- "$FILE" | eval "${PAGER:-more}"
+ fi
+ if test -t 1; then
+ FIRST=0
+ fi
+ done
+fi
diff --git a/Build/source/utils/xz-4.999.9beta/src/xz/Makefile.am b/Build/source/utils/xz-4.999.9beta/src/xz/Makefile.am
new file mode 100644
index 00000000000..ccdc66cab44
--- /dev/null
+++ b/Build/source/utils/xz-4.999.9beta/src/xz/Makefile.am
@@ -0,0 +1,96 @@
+##
+## Author: Lasse Collin
+##
+## This file has been put into the public domain.
+## You can do whatever you want with this file.
+##
+
+bin_PROGRAMS = xz
+
+xz_SOURCES = \
+ args.c \
+ args.h \
+ coder.c \
+ coder.h \
+ file_io.c \
+ file_io.h \
+ hardware.c \
+ hardware.h \
+ main.c \
+ main.h \
+ message.c \
+ message.h \
+ options.c \
+ options.h \
+ private.h \
+ signals.c \
+ signals.h \
+ suffix.c \
+ suffix.h \
+ util.c \
+ util.h
+
+if COND_W32
+xz_SOURCES += xz_w32res.rc
+endif
+
+xz_CPPFLAGS = \
+ -DLOCALEDIR=\"$(localedir)\" \
+ -I$(top_srcdir)/src/common \
+ -I$(top_srcdir)/src/liblzma/api \
+ -I$(top_builddir)/lib \
+ $(STATIC_CPPFLAGS)
+
+xz_LDFLAGS = $(STATIC_LDFLAGS)
+xz_LDADD = $(top_builddir)/src/liblzma/liblzma.la
+
+if COND_GNULIB
+xz_LDADD += $(top_builddir)/lib/libgnu.a
+endif
+
+# libgnu.a may need these libs, so this must be after libgnu.a.
+xz_LDADD += $(LTLIBINTL)
+
+
+# Windows resource compiler support
+.rc.o:
+ $(RC) $(DEFS) $(DEFAULT_INCLUDES) $(INCLUDES) \
+ $(xz_CPPFLAGS) $(CPPFLAGS) $(RCFLAGS) -i $< -o $@
+
+
+dist_man_MANS = xz.1
+
+
+## Create symlinks for unxz and xzcat for convenience. Create symlinks also
+## for lzma, unlzma, and lzcat for compatibility with LZMA Utils 4.32.x.
+xzlinks = unxz xzcat lzma unlzma lzcat
+
+install-exec-hook:
+ cd $(DESTDIR)$(bindir) && \
+ target=`echo xz | sed '$(transform)'`$(EXEEXT) && \
+ for name in $(xzlinks); do \
+ link=`echo $$name | sed '$(transform)'` && \
+ rm -f $$link && \
+ $(LN_S) $$target $$link; \
+ done
+
+install-data-hook:
+ cd $(DESTDIR)$(mandir)/man1 && \
+ target=`echo xz | sed '$(transform)'` && \
+ for name in $(xzlinks); do \
+ link=`echo $$name | sed '$(transform)'` && \
+ rm -f $$link.1 && \
+ $(LN_S) $$target.1 $$link.1; \
+ done
+
+uninstall-hook:
+ cd $(DESTDIR)$(bindir) && \
+ for name in $(xzlinks); do \
+ link=`echo $$name | sed '$(transform)'` && \
+ rm -f $$link; \
+ done
+ cd $(DESTDIR)$(mandir)/man1 && \
+ for name in $(xzlinks); do \
+ link=`echo $$name | sed '$(transform)'` && \
+ rm -f $$link.1; \
+ done
diff --git a/Build/source/utils/xz-4.999.8beta/src/xz/Makefile.in b/Build/source/utils/xz-4.999.9beta/src/xz/Makefile.in
index e06d2606bab..cb127ade119 100644
--- a/Build/source/utils/xz-4.999.8beta/src/xz/Makefile.in
+++ b/Build/source/utils/xz-4.999.9beta/src/xz/Makefile.in
@@ -1,8 +1,9 @@
-# Makefile.in generated by automake 1.10.2 from Makefile.am.
+# Makefile.in generated by automake 1.11 from Makefile.am.
# @configure_input@
# Copyright (C) 1994, 1995, 1996, 1997, 1998, 1999, 2000, 2001, 2002,
-# 2003, 2004, 2005, 2006, 2007, 2008 Free Software Foundation, Inc.
+# 2003, 2004, 2005, 2006, 2007, 2008, 2009 Free Software Foundation,
+# Inc.
# This Makefile.in is free software; the Free Software Foundation
# gives unlimited permission to copy and/or distribute it,
# with or without modifications, as long as this notice is preserved.
@@ -16,8 +17,9 @@
VPATH = @srcdir@
pkgdatadir = $(datadir)/@PACKAGE@
-pkglibdir = $(libdir)/@PACKAGE@
pkgincludedir = $(includedir)/@PACKAGE@
+pkglibdir = $(libdir)/@PACKAGE@
+pkglibexecdir = $(libexecdir)/@PACKAGE@
am__cd = CDPATH="$${ZSH_VERSION+.}$(PATH_SEPARATOR)" && cd
install_sh_DATA = $(install_sh) -c -m 644
install_sh_PROGRAM = $(install_sh) -c
@@ -33,37 +35,51 @@ POST_UNINSTALL = :
build_triplet = @build@
host_triplet = @host@
bin_PROGRAMS = xz$(EXEEXT)
-@COND_GNULIB_TRUE@am__append_1 = @top_builddir@/lib/libgnu.a
+@COND_W32_TRUE@am__append_1 = xz_w32res.rc
+@COND_GNULIB_TRUE@am__append_2 = $(top_builddir)/lib/libgnu.a
subdir = src/xz
-DIST_COMMON = $(srcdir)/Makefile.am $(srcdir)/Makefile.in
+DIST_COMMON = $(dist_man_MANS) $(srcdir)/Makefile.am \
+ $(srcdir)/Makefile.in
ACLOCAL_M4 = $(top_srcdir)/aclocal.m4
am__aclocal_m4_deps = $(top_srcdir)/m4/acx_pthread.m4 \
$(top_srcdir)/m4/getopt.m4 $(top_srcdir)/m4/gettext.m4 \
- $(top_srcdir)/m4/iconv.m4 $(top_srcdir)/m4/lib-ld.m4 \
+ $(top_srcdir)/m4/iconv.m4 $(top_srcdir)/m4/lc_cpucores.m4 \
+ $(top_srcdir)/m4/lc_physmem.m4 $(top_srcdir)/m4/lib-ld.m4 \
$(top_srcdir)/m4/lib-link.m4 $(top_srcdir)/m4/lib-prefix.m4 \
- $(top_srcdir)/m4/nls.m4 $(top_srcdir)/m4/po.m4 \
- $(top_srcdir)/m4/progtest.m4 $(top_srcdir)/configure.ac
+ $(top_srcdir)/m4/libtool.m4 $(top_srcdir)/m4/ltoptions.m4 \
+ $(top_srcdir)/m4/ltsugar.m4 $(top_srcdir)/m4/ltversion.m4 \
+ $(top_srcdir)/m4/lt~obsolete.m4 $(top_srcdir)/m4/nls.m4 \
+ $(top_srcdir)/m4/po.m4 $(top_srcdir)/m4/posix-shell.m4 \
+ $(top_srcdir)/m4/progtest.m4 $(top_srcdir)/m4/visibility.m4 \
+ $(top_srcdir)/configure.ac
am__configure_deps = $(am__aclocal_m4_deps) $(CONFIGURE_DEPENDENCIES) \
$(ACLOCAL_M4)
mkinstalldirs = $(install_sh) -d
CONFIG_HEADER = $(top_builddir)/config.h
CONFIG_CLEAN_FILES =
-am__installdirs = "$(DESTDIR)$(bindir)"
-binPROGRAMS_INSTALL = $(INSTALL_PROGRAM)
+CONFIG_CLEAN_VPATH_FILES =
+am__installdirs = "$(DESTDIR)$(bindir)" "$(DESTDIR)$(man1dir)"
PROGRAMS = $(bin_PROGRAMS)
-am_xz_OBJECTS = xz-args.$(OBJEXT) xz-hardware.$(OBJEXT) \
- xz-io.$(OBJEXT) xz-main.$(OBJEXT) xz-message.$(OBJEXT) \
- xz-options.$(OBJEXT) xz-process.$(OBJEXT) xz-signals.$(OBJEXT) \
- xz-suffix.$(OBJEXT) xz-util.$(OBJEXT)
+am__xz_SOURCES_DIST = args.c args.h coder.c coder.h file_io.c \
+ file_io.h hardware.c hardware.h main.c main.h message.c \
+ message.h options.c options.h private.h signals.c signals.h \
+ suffix.c suffix.h util.c util.h xz_w32res.rc
+@COND_W32_TRUE@am__objects_1 = xz_w32res.$(OBJEXT)
+am_xz_OBJECTS = xz-args.$(OBJEXT) xz-coder.$(OBJEXT) \
+ xz-file_io.$(OBJEXT) xz-hardware.$(OBJEXT) xz-main.$(OBJEXT) \
+ xz-message.$(OBJEXT) xz-options.$(OBJEXT) xz-signals.$(OBJEXT) \
+ xz-suffix.$(OBJEXT) xz-util.$(OBJEXT) $(am__objects_1)
xz_OBJECTS = $(am_xz_OBJECTS)
-xz_DEPENDENCIES = @top_builddir@/src/liblzma/liblzma.la \
- $(am__append_1)
+am__DEPENDENCIES_1 =
+xz_DEPENDENCIES = $(top_builddir)/src/liblzma/liblzma.la \
+ $(am__append_2) $(am__DEPENDENCIES_1)
xz_LINK = $(LIBTOOL) --tag=CC $(AM_LIBTOOLFLAGS) $(LIBTOOLFLAGS) \
--mode=link $(CCLD) $(AM_CFLAGS) $(CFLAGS) $(xz_LDFLAGS) \
$(LDFLAGS) -o $@
DEFAULT_INCLUDES = -I.@am__isrc@ -I$(top_builddir)
-depcomp = $(SHELL) $(top_srcdir)/depcomp
+depcomp = $(SHELL) $(top_srcdir)/build-aux/depcomp
am__depfiles_maybe = depfiles
+am__mv = mv -f
COMPILE = $(CC) $(DEFS) $(DEFAULT_INCLUDES) $(INCLUDES) $(AM_CPPFLAGS) \
$(CPPFLAGS) $(AM_CFLAGS) $(CFLAGS)
LTCOMPILE = $(LIBTOOL) --tag=CC $(AM_LIBTOOLFLAGS) $(LIBTOOLFLAGS) \
@@ -74,13 +90,39 @@ LINK = $(LIBTOOL) --tag=CC $(AM_LIBTOOLFLAGS) $(LIBTOOLFLAGS) \
--mode=link $(CCLD) $(AM_CFLAGS) $(CFLAGS) $(AM_LDFLAGS) \
$(LDFLAGS) -o $@
SOURCES = $(xz_SOURCES)
-DIST_SOURCES = $(xz_SOURCES)
+DIST_SOURCES = $(am__xz_SOURCES_DIST)
+am__vpath_adj_setup = srcdirstrip=`echo "$(srcdir)" | sed 's|.|.|g'`;
+am__vpath_adj = case $$p in \
+ $(srcdir)/*) f=`echo "$$p" | sed "s|^$$srcdirstrip/||"`;; \
+ *) f=$$p;; \
+ esac;
+am__strip_dir = f=`echo $$p | sed -e 's|^.*/||'`;
+am__install_max = 40
+am__nobase_strip_setup = \
+ srcdirstrip=`echo "$(srcdir)" | sed 's/[].[^$$\\*|]/\\\\&/g'`
+am__nobase_strip = \
+ for p in $$list; do echo "$$p"; done | sed -e "s|$$srcdirstrip/||"
+am__nobase_list = $(am__nobase_strip_setup); \
+ for p in $$list; do echo "$$p $$p"; done | \
+ sed "s| $$srcdirstrip/| |;"' / .*\//!s/ .*/ ./; s,\( .*\)/[^/]*$$,\1,' | \
+ $(AWK) 'BEGIN { files["."] = "" } { files[$$2] = files[$$2] " " $$1; \
+ if (++n[$$2] == $(am__install_max)) \
+ { print $$2, files[$$2]; n[$$2] = 0; files[$$2] = "" } } \
+ END { for (dir in files) print dir, files[dir] }'
+am__base_list = \
+ sed '$$!N;$$!N;$$!N;$$!N;$$!N;$$!N;$$!N;s/\n/ /g' | \
+ sed '$$!N;$$!N;$$!N;$$!N;s/\n/ /g'
+man1dir = $(mandir)/man1
+NROFF = nroff
+MANS = $(dist_man_MANS)
ETAGS = etags
CTAGS = ctags
DISTFILES = $(DIST_COMMON) $(DIST_SOURCES) $(TEXINFOS) $(EXTRA_DIST)
ACLOCAL = @ACLOCAL@
AMTAR = @AMTAR@
+AM_CFLAGS = @AM_CFLAGS@
AR = @AR@
+AS = @AS@
AUTOCONF = @AUTOCONF@
AUTOHEADER = @AUTOHEADER@
AUTOMAKE = @AUTOMAKE@
@@ -94,22 +136,20 @@ CFLAGS = @CFLAGS@
CFLAG_VISIBILITY = @CFLAG_VISIBILITY@
CPP = @CPP@
CPPFLAGS = @CPPFLAGS@
-CXX = @CXX@
-CXXCPP = @CXXCPP@
-CXXDEPMODE = @CXXDEPMODE@
-CXXFLAGS = @CXXFLAGS@
CYGPATH_W = @CYGPATH_W@
DEFS = @DEFS@
DEPDIR = @DEPDIR@
+DLLTOOL = @DLLTOOL@
DSYMUTIL = @DSYMUTIL@
-ECHO = @ECHO@
+DUMPBIN = @DUMPBIN@
+DYNAMIC_CPPFLAGS = @DYNAMIC_CPPFLAGS@
+DYNAMIC_LDFLAGS = @DYNAMIC_LDFLAGS@
ECHO_C = @ECHO_C@
ECHO_N = @ECHO_N@
ECHO_T = @ECHO_T@
EGREP = @EGREP@
EXEEXT = @EXEEXT@
-F77 = @F77@
-FFLAGS = @FFLAGS@
+FGREP = @FGREP@
GETOPT_H = @GETOPT_H@
GMSGFMT = @GMSGFMT@
GMSGFMT_015 = @GMSGFMT_015@
@@ -122,12 +162,14 @@ INSTALL_SCRIPT = @INSTALL_SCRIPT@
INSTALL_STRIP_PROGRAM = @INSTALL_STRIP_PROGRAM@
INTLLIBS = @INTLLIBS@
INTL_MACOSX_LIBS = @INTL_MACOSX_LIBS@
+LD = @LD@
LDFLAGS = @LDFLAGS@
LIBICONV = @LIBICONV@
LIBINTL = @LIBINTL@
LIBOBJS = @LIBOBJS@
LIBS = @LIBS@
LIBTOOL = @LIBTOOL@
+LIPO = @LIPO@
LN_S = @LN_S@
LTLIBICONV = @LTLIBICONV@
LTLIBINTL = @LTLIBINTL@
@@ -137,23 +179,34 @@ MKDIR_P = @MKDIR_P@
MSGFMT = @MSGFMT@
MSGFMT_015 = @MSGFMT_015@
MSGMERGE = @MSGMERGE@
+NM = @NM@
NMEDIT = @NMEDIT@
+OBJDUMP = @OBJDUMP@
OBJEXT = @OBJEXT@
+OTOOL = @OTOOL@
+OTOOL64 = @OTOOL64@
PACKAGE = @PACKAGE@
PACKAGE_BUGREPORT = @PACKAGE_BUGREPORT@
+PACKAGE_HOMEPAGE = @PACKAGE_HOMEPAGE@
PACKAGE_NAME = @PACKAGE_NAME@
PACKAGE_STRING = @PACKAGE_STRING@
PACKAGE_TARNAME = @PACKAGE_TARNAME@
+PACKAGE_URL = @PACKAGE_URL@
PACKAGE_VERSION = @PACKAGE_VERSION@
PATH_SEPARATOR = @PATH_SEPARATOR@
+POSIX_SHELL = @POSIX_SHELL@
POSUB = @POSUB@
+PREFERABLY_POSIX_SHELL = @PREFERABLY_POSIX_SHELL@
PTHREAD_CC = @PTHREAD_CC@
PTHREAD_CFLAGS = @PTHREAD_CFLAGS@
PTHREAD_LIBS = @PTHREAD_LIBS@
RANLIB = @RANLIB@
+RC = @RC@
SED = @SED@
SET_MAKE = @SET_MAKE@
SHELL = @SHELL@
+STATIC_CPPFLAGS = @STATIC_CPPFLAGS@
+STATIC_LDFLAGS = @STATIC_LDFLAGS@
STRIP = @STRIP@
USE_NLS = @USE_NLS@
VERSION = @VERSION@
@@ -164,8 +217,7 @@ abs_srcdir = @abs_srcdir@
abs_top_builddir = @abs_top_builddir@
abs_top_srcdir = @abs_top_srcdir@
ac_ct_CC = @ac_ct_CC@
-ac_ct_CXX = @ac_ct_CXX@
-ac_ct_F77 = @ac_ct_F77@
+ac_ct_DUMPBIN = @ac_ct_DUMPBIN@
acx_pthread_config = @acx_pthread_config@
am__include = @am__include@
am__leading_dot = @am__leading_dot@
@@ -197,6 +249,7 @@ libdir = @libdir@
libexecdir = @libexecdir@
localedir = @localedir@
localstatedir = @localstatedir@
+lt_ECHO = @lt_ECHO@
mandir = @mandir@
mkdir_p = @mkdir_p@
oldincludedir = @oldincludedir@
@@ -212,43 +265,29 @@ target_alias = @target_alias@
top_build_prefix = @top_build_prefix@
top_builddir = @top_builddir@
top_srcdir = @top_srcdir@
-xz_SOURCES = \
- args.c \
- args.h \
- hardware.c \
- hardware.h \
- io.c \
- io.h \
- main.c \
- main.h \
- message.c \
- message.h \
- options.c \
- options.h \
- private.h \
- process.c \
- process.h \
- signals.c \
- signals.h \
- suffix.c \
- suffix.h \
- util.c \
- util.h
-
+xz = @xz@
+xz_SOURCES = args.c args.h coder.c coder.h file_io.c file_io.h \
+ hardware.c hardware.h main.c main.h message.c message.h \
+ options.c options.h private.h signals.c signals.h suffix.c \
+ suffix.h util.c util.h $(am__append_1)
xz_CPPFLAGS = \
-DLOCALEDIR=\"$(localedir)\" \
- -I@top_srcdir@/src/common \
- -I@top_srcdir@/src/liblzma/api \
- -I@top_builddir@/lib \
- -I@top_srcdir@/lib
-
-xz_LDFLAGS = -static
-xz_LDADD = @top_builddir@/src/liblzma/liblzma.la @LTLIBINTL@ \
- $(am__append_1)
+ -I$(top_srcdir)/src/common \
+ -I$(top_srcdir)/src/liblzma/api \
+ -I$(top_builddir)/lib \
+ $(STATIC_CPPFLAGS)
+
+xz_LDFLAGS = $(STATIC_LDFLAGS)
+
+# libgnu.a may need these libs, so this must be after libgnu.a.
+xz_LDADD = $(top_builddir)/src/liblzma/liblzma.la $(am__append_2) \
+ $(LTLIBINTL)
+dist_man_MANS = xz.1
+xzlinks = unxz xzcat lzma unlzma lzcat
all: all-am
.SUFFIXES:
-.SUFFIXES: .c .lo .o .obj
+.SUFFIXES: .c .lo .o .obj .rc
$(srcdir)/Makefile.in: $(srcdir)/Makefile.am $(am__configure_deps)
@for dep in $?; do \
case '$(am__configure_deps)' in \
@@ -258,9 +297,9 @@ $(srcdir)/Makefile.in: $(srcdir)/Makefile.am $(am__configure_deps)
exit 1;; \
esac; \
done; \
- echo ' cd $(top_srcdir) && $(AUTOMAKE) --foreign src/xz/Makefile'; \
- cd $(top_srcdir) && \
- $(AUTOMAKE) --foreign src/xz/Makefile
+ echo ' cd $(top_srcdir) && $(AUTOMAKE) --foreign src/xz/Makefile'; \
+ $(am__cd) $(top_srcdir) && \
+ $(AUTOMAKE) --foreign src/xz/Makefile
.PRECIOUS: Makefile
Makefile: $(srcdir)/Makefile.in $(top_builddir)/config.status
@case '$?' in \
@@ -278,34 +317,50 @@ $(top_srcdir)/configure: $(am__configure_deps)
cd $(top_builddir) && $(MAKE) $(AM_MAKEFLAGS) am--refresh
$(ACLOCAL_M4): $(am__aclocal_m4_deps)
cd $(top_builddir) && $(MAKE) $(AM_MAKEFLAGS) am--refresh
+$(am__aclocal_m4_deps):
install-binPROGRAMS: $(bin_PROGRAMS)
@$(NORMAL_INSTALL)
test -z "$(bindir)" || $(MKDIR_P) "$(DESTDIR)$(bindir)"
- @list='$(bin_PROGRAMS)'; for p in $$list; do \
- p1=`echo $$p|sed 's/$(EXEEXT)$$//'`; \
- if test -f $$p \
- || test -f $$p1 \
- ; then \
- f=`echo "$$p1" | sed 's,^.*/,,;$(transform);s/$$/$(EXEEXT)/'`; \
- echo " $(INSTALL_PROGRAM_ENV) $(LIBTOOL) $(AM_LIBTOOLFLAGS) $(LIBTOOLFLAGS) --mode=install $(binPROGRAMS_INSTALL) '$$p' '$(DESTDIR)$(bindir)/$$f'"; \
- $(INSTALL_PROGRAM_ENV) $(LIBTOOL) $(AM_LIBTOOLFLAGS) $(LIBTOOLFLAGS) --mode=install $(binPROGRAMS_INSTALL) "$$p" "$(DESTDIR)$(bindir)/$$f" || exit 1; \
- else :; fi; \
- done
+ @list='$(bin_PROGRAMS)'; test -n "$(bindir)" || list=; \
+ for p in $$list; do echo "$$p $$p"; done | \
+ sed 's/$(EXEEXT)$$//' | \
+ while read p p1; do if test -f $$p || test -f $$p1; \
+ then echo "$$p"; echo "$$p"; else :; fi; \
+ done | \
+ sed -e 'p;s,.*/,,;n;h' -e 's|.*|.|' \
+ -e 'p;x;s,.*/,,;s/$(EXEEXT)$$//;$(transform);s/$$/$(EXEEXT)/' | \
+ sed 'N;N;N;s,\n, ,g' | \
+ $(AWK) 'BEGIN { files["."] = ""; dirs["."] = 1 } \
+ { d=$$3; if (dirs[d] != 1) { print "d", d; dirs[d] = 1 } \
+ if ($$2 == $$4) files[d] = files[d] " " $$1; \
+ else { print "f", $$3 "/" $$4, $$1; } } \
+ END { for (d in files) print "f", d, files[d] }' | \
+ while read type dir files; do \
+ if test "$$dir" = .; then dir=; else dir=/$$dir; fi; \
+ test -z "$$files" || { \
+ echo " $(INSTALL_PROGRAM_ENV) $(LIBTOOL) $(AM_LIBTOOLFLAGS) $(LIBTOOLFLAGS) --mode=install $(INSTALL_PROGRAM) $$files '$(DESTDIR)$(bindir)$$dir'"; \
+ $(INSTALL_PROGRAM_ENV) $(LIBTOOL) $(AM_LIBTOOLFLAGS) $(LIBTOOLFLAGS) --mode=install $(INSTALL_PROGRAM) $$files "$(DESTDIR)$(bindir)$$dir" || exit $$?; \
+ } \
+ ; done
uninstall-binPROGRAMS:
@$(NORMAL_UNINSTALL)
- @list='$(bin_PROGRAMS)'; for p in $$list; do \
- f=`echo "$$p" | sed 's,^.*/,,;s/$(EXEEXT)$$//;$(transform);s/$$/$(EXEEXT)/'`; \
- echo " rm -f '$(DESTDIR)$(bindir)/$$f'"; \
- rm -f "$(DESTDIR)$(bindir)/$$f"; \
- done
+ @list='$(bin_PROGRAMS)'; test -n "$(bindir)" || list=; \
+ files=`for p in $$list; do echo "$$p"; done | \
+ sed -e 'h;s,^.*/,,;s/$(EXEEXT)$$//;$(transform)' \
+ -e 's/$$/$(EXEEXT)/' `; \
+ test -n "$$list" || exit 0; \
+ echo " ( cd '$(DESTDIR)$(bindir)' && rm -f" $$files ")"; \
+ cd "$(DESTDIR)$(bindir)" && rm -f $$files
clean-binPROGRAMS:
- @list='$(bin_PROGRAMS)'; for p in $$list; do \
- f=`echo $$p|sed 's/$(EXEEXT)$$//'`; \
- echo " rm -f $$p $$f"; \
- rm -f $$p $$f ; \
- done
+ @list='$(bin_PROGRAMS)'; test -n "$$list" || exit 0; \
+ echo " rm -f" $$list; \
+ rm -f $$list || exit $$?; \
+ test -n "$(EXEEXT)" || exit 0; \
+ list=`for p in $$list; do echo "$$p"; done | sed 's/$(EXEEXT)$$//'`; \
+ echo " rm -f" $$list; \
+ rm -f $$list
xz$(EXEEXT): $(xz_OBJECTS) $(xz_DEPENDENCIES)
@rm -f xz$(EXEEXT)
$(xz_LINK) $(xz_OBJECTS) $(xz_LDADD) $(LIBS)
@@ -317,173 +372,173 @@ distclean-compile:
-rm -f *.tab.c
@AMDEP_TRUE@@am__include@ @am__quote@./$(DEPDIR)/xz-args.Po@am__quote@
+@AMDEP_TRUE@@am__include@ @am__quote@./$(DEPDIR)/xz-coder.Po@am__quote@
+@AMDEP_TRUE@@am__include@ @am__quote@./$(DEPDIR)/xz-file_io.Po@am__quote@
@AMDEP_TRUE@@am__include@ @am__quote@./$(DEPDIR)/xz-hardware.Po@am__quote@
-@AMDEP_TRUE@@am__include@ @am__quote@./$(DEPDIR)/xz-io.Po@am__quote@
@AMDEP_TRUE@@am__include@ @am__quote@./$(DEPDIR)/xz-main.Po@am__quote@
@AMDEP_TRUE@@am__include@ @am__quote@./$(DEPDIR)/xz-message.Po@am__quote@
@AMDEP_TRUE@@am__include@ @am__quote@./$(DEPDIR)/xz-options.Po@am__quote@
-@AMDEP_TRUE@@am__include@ @am__quote@./$(DEPDIR)/xz-process.Po@am__quote@
@AMDEP_TRUE@@am__include@ @am__quote@./$(DEPDIR)/xz-signals.Po@am__quote@
@AMDEP_TRUE@@am__include@ @am__quote@./$(DEPDIR)/xz-suffix.Po@am__quote@
@AMDEP_TRUE@@am__include@ @am__quote@./$(DEPDIR)/xz-util.Po@am__quote@
.c.o:
@am__fastdepCC_TRUE@ $(COMPILE) -MT $@ -MD -MP -MF $(DEPDIR)/$*.Tpo -c -o $@ $<
-@am__fastdepCC_TRUE@ mv -f $(DEPDIR)/$*.Tpo $(DEPDIR)/$*.Po
+@am__fastdepCC_TRUE@ $(am__mv) $(DEPDIR)/$*.Tpo $(DEPDIR)/$*.Po
@AMDEP_TRUE@@am__fastdepCC_FALSE@ source='$<' object='$@' libtool=no @AMDEPBACKSLASH@
@AMDEP_TRUE@@am__fastdepCC_FALSE@ DEPDIR=$(DEPDIR) $(CCDEPMODE) $(depcomp) @AMDEPBACKSLASH@
@am__fastdepCC_FALSE@ $(COMPILE) -c $<
.c.obj:
@am__fastdepCC_TRUE@ $(COMPILE) -MT $@ -MD -MP -MF $(DEPDIR)/$*.Tpo -c -o $@ `$(CYGPATH_W) '$<'`
-@am__fastdepCC_TRUE@ mv -f $(DEPDIR)/$*.Tpo $(DEPDIR)/$*.Po
+@am__fastdepCC_TRUE@ $(am__mv) $(DEPDIR)/$*.Tpo $(DEPDIR)/$*.Po
@AMDEP_TRUE@@am__fastdepCC_FALSE@ source='$<' object='$@' libtool=no @AMDEPBACKSLASH@
@AMDEP_TRUE@@am__fastdepCC_FALSE@ DEPDIR=$(DEPDIR) $(CCDEPMODE) $(depcomp) @AMDEPBACKSLASH@
@am__fastdepCC_FALSE@ $(COMPILE) -c `$(CYGPATH_W) '$<'`
.c.lo:
@am__fastdepCC_TRUE@ $(LTCOMPILE) -MT $@ -MD -MP -MF $(DEPDIR)/$*.Tpo -c -o $@ $<
-@am__fastdepCC_TRUE@ mv -f $(DEPDIR)/$*.Tpo $(DEPDIR)/$*.Plo
+@am__fastdepCC_TRUE@ $(am__mv) $(DEPDIR)/$*.Tpo $(DEPDIR)/$*.Plo
@AMDEP_TRUE@@am__fastdepCC_FALSE@ source='$<' object='$@' libtool=yes @AMDEPBACKSLASH@
@AMDEP_TRUE@@am__fastdepCC_FALSE@ DEPDIR=$(DEPDIR) $(CCDEPMODE) $(depcomp) @AMDEPBACKSLASH@
@am__fastdepCC_FALSE@ $(LTCOMPILE) -c -o $@ $<
xz-args.o: args.c
@am__fastdepCC_TRUE@ $(CC) $(DEFS) $(DEFAULT_INCLUDES) $(INCLUDES) $(xz_CPPFLAGS) $(CPPFLAGS) $(AM_CFLAGS) $(CFLAGS) -MT xz-args.o -MD -MP -MF $(DEPDIR)/xz-args.Tpo -c -o xz-args.o `test -f 'args.c' || echo '$(srcdir)/'`args.c
-@am__fastdepCC_TRUE@ mv -f $(DEPDIR)/xz-args.Tpo $(DEPDIR)/xz-args.Po
+@am__fastdepCC_TRUE@ $(am__mv) $(DEPDIR)/xz-args.Tpo $(DEPDIR)/xz-args.Po
@AMDEP_TRUE@@am__fastdepCC_FALSE@ source='args.c' object='xz-args.o' libtool=no @AMDEPBACKSLASH@
@AMDEP_TRUE@@am__fastdepCC_FALSE@ DEPDIR=$(DEPDIR) $(CCDEPMODE) $(depcomp) @AMDEPBACKSLASH@
@am__fastdepCC_FALSE@ $(CC) $(DEFS) $(DEFAULT_INCLUDES) $(INCLUDES) $(xz_CPPFLAGS) $(CPPFLAGS) $(AM_CFLAGS) $(CFLAGS) -c -o xz-args.o `test -f 'args.c' || echo '$(srcdir)/'`args.c
xz-args.obj: args.c
@am__fastdepCC_TRUE@ $(CC) $(DEFS) $(DEFAULT_INCLUDES) $(INCLUDES) $(xz_CPPFLAGS) $(CPPFLAGS) $(AM_CFLAGS) $(CFLAGS) -MT xz-args.obj -MD -MP -MF $(DEPDIR)/xz-args.Tpo -c -o xz-args.obj `if test -f 'args.c'; then $(CYGPATH_W) 'args.c'; else $(CYGPATH_W) '$(srcdir)/args.c'; fi`
-@am__fastdepCC_TRUE@ mv -f $(DEPDIR)/xz-args.Tpo $(DEPDIR)/xz-args.Po
+@am__fastdepCC_TRUE@ $(am__mv) $(DEPDIR)/xz-args.Tpo $(DEPDIR)/xz-args.Po
@AMDEP_TRUE@@am__fastdepCC_FALSE@ source='args.c' object='xz-args.obj' libtool=no @AMDEPBACKSLASH@
@AMDEP_TRUE@@am__fastdepCC_FALSE@ DEPDIR=$(DEPDIR) $(CCDEPMODE) $(depcomp) @AMDEPBACKSLASH@
@am__fastdepCC_FALSE@ $(CC) $(DEFS) $(DEFAULT_INCLUDES) $(INCLUDES) $(xz_CPPFLAGS) $(CPPFLAGS) $(AM_CFLAGS) $(CFLAGS) -c -o xz-args.obj `if test -f 'args.c'; then $(CYGPATH_W) 'args.c'; else $(CYGPATH_W) '$(srcdir)/args.c'; fi`
+xz-coder.o: coder.c
+@am__fastdepCC_TRUE@ $(CC) $(DEFS) $(DEFAULT_INCLUDES) $(INCLUDES) $(xz_CPPFLAGS) $(CPPFLAGS) $(AM_CFLAGS) $(CFLAGS) -MT xz-coder.o -MD -MP -MF $(DEPDIR)/xz-coder.Tpo -c -o xz-coder.o `test -f 'coder.c' || echo '$(srcdir)/'`coder.c
+@am__fastdepCC_TRUE@ $(am__mv) $(DEPDIR)/xz-coder.Tpo $(DEPDIR)/xz-coder.Po
+@AMDEP_TRUE@@am__fastdepCC_FALSE@ source='coder.c' object='xz-coder.o' libtool=no @AMDEPBACKSLASH@
+@AMDEP_TRUE@@am__fastdepCC_FALSE@ DEPDIR=$(DEPDIR) $(CCDEPMODE) $(depcomp) @AMDEPBACKSLASH@
+@am__fastdepCC_FALSE@ $(CC) $(DEFS) $(DEFAULT_INCLUDES) $(INCLUDES) $(xz_CPPFLAGS) $(CPPFLAGS) $(AM_CFLAGS) $(CFLAGS) -c -o xz-coder.o `test -f 'coder.c' || echo '$(srcdir)/'`coder.c
+
+xz-coder.obj: coder.c
+@am__fastdepCC_TRUE@ $(CC) $(DEFS) $(DEFAULT_INCLUDES) $(INCLUDES) $(xz_CPPFLAGS) $(CPPFLAGS) $(AM_CFLAGS) $(CFLAGS) -MT xz-coder.obj -MD -MP -MF $(DEPDIR)/xz-coder.Tpo -c -o xz-coder.obj `if test -f 'coder.c'; then $(CYGPATH_W) 'coder.c'; else $(CYGPATH_W) '$(srcdir)/coder.c'; fi`
+@am__fastdepCC_TRUE@ $(am__mv) $(DEPDIR)/xz-coder.Tpo $(DEPDIR)/xz-coder.Po
+@AMDEP_TRUE@@am__fastdepCC_FALSE@ source='coder.c' object='xz-coder.obj' libtool=no @AMDEPBACKSLASH@
+@AMDEP_TRUE@@am__fastdepCC_FALSE@ DEPDIR=$(DEPDIR) $(CCDEPMODE) $(depcomp) @AMDEPBACKSLASH@
+@am__fastdepCC_FALSE@ $(CC) $(DEFS) $(DEFAULT_INCLUDES) $(INCLUDES) $(xz_CPPFLAGS) $(CPPFLAGS) $(AM_CFLAGS) $(CFLAGS) -c -o xz-coder.obj `if test -f 'coder.c'; then $(CYGPATH_W) 'coder.c'; else $(CYGPATH_W) '$(srcdir)/coder.c'; fi`
+
+xz-file_io.o: file_io.c
+@am__fastdepCC_TRUE@ $(CC) $(DEFS) $(DEFAULT_INCLUDES) $(INCLUDES) $(xz_CPPFLAGS) $(CPPFLAGS) $(AM_CFLAGS) $(CFLAGS) -MT xz-file_io.o -MD -MP -MF $(DEPDIR)/xz-file_io.Tpo -c -o xz-file_io.o `test -f 'file_io.c' || echo '$(srcdir)/'`file_io.c
+@am__fastdepCC_TRUE@ $(am__mv) $(DEPDIR)/xz-file_io.Tpo $(DEPDIR)/xz-file_io.Po
+@AMDEP_TRUE@@am__fastdepCC_FALSE@ source='file_io.c' object='xz-file_io.o' libtool=no @AMDEPBACKSLASH@
+@AMDEP_TRUE@@am__fastdepCC_FALSE@ DEPDIR=$(DEPDIR) $(CCDEPMODE) $(depcomp) @AMDEPBACKSLASH@
+@am__fastdepCC_FALSE@ $(CC) $(DEFS) $(DEFAULT_INCLUDES) $(INCLUDES) $(xz_CPPFLAGS) $(CPPFLAGS) $(AM_CFLAGS) $(CFLAGS) -c -o xz-file_io.o `test -f 'file_io.c' || echo '$(srcdir)/'`file_io.c
+
+xz-file_io.obj: file_io.c
+@am__fastdepCC_TRUE@ $(CC) $(DEFS) $(DEFAULT_INCLUDES) $(INCLUDES) $(xz_CPPFLAGS) $(CPPFLAGS) $(AM_CFLAGS) $(CFLAGS) -MT xz-file_io.obj -MD -MP -MF $(DEPDIR)/xz-file_io.Tpo -c -o xz-file_io.obj `if test -f 'file_io.c'; then $(CYGPATH_W) 'file_io.c'; else $(CYGPATH_W) '$(srcdir)/file_io.c'; fi`
+@am__fastdepCC_TRUE@ $(am__mv) $(DEPDIR)/xz-file_io.Tpo $(DEPDIR)/xz-file_io.Po
+@AMDEP_TRUE@@am__fastdepCC_FALSE@ source='file_io.c' object='xz-file_io.obj' libtool=no @AMDEPBACKSLASH@
+@AMDEP_TRUE@@am__fastdepCC_FALSE@ DEPDIR=$(DEPDIR) $(CCDEPMODE) $(depcomp) @AMDEPBACKSLASH@
+@am__fastdepCC_FALSE@ $(CC) $(DEFS) $(DEFAULT_INCLUDES) $(INCLUDES) $(xz_CPPFLAGS) $(CPPFLAGS) $(AM_CFLAGS) $(CFLAGS) -c -o xz-file_io.obj `if test -f 'file_io.c'; then $(CYGPATH_W) 'file_io.c'; else $(CYGPATH_W) '$(srcdir)/file_io.c'; fi`
+
xz-hardware.o: hardware.c
@am__fastdepCC_TRUE@ $(CC) $(DEFS) $(DEFAULT_INCLUDES) $(INCLUDES) $(xz_CPPFLAGS) $(CPPFLAGS) $(AM_CFLAGS) $(CFLAGS) -MT xz-hardware.o -MD -MP -MF $(DEPDIR)/xz-hardware.Tpo -c -o xz-hardware.o `test -f 'hardware.c' || echo '$(srcdir)/'`hardware.c
-@am__fastdepCC_TRUE@ mv -f $(DEPDIR)/xz-hardware.Tpo $(DEPDIR)/xz-hardware.Po
+@am__fastdepCC_TRUE@ $(am__mv) $(DEPDIR)/xz-hardware.Tpo $(DEPDIR)/xz-hardware.Po
@AMDEP_TRUE@@am__fastdepCC_FALSE@ source='hardware.c' object='xz-hardware.o' libtool=no @AMDEPBACKSLASH@
@AMDEP_TRUE@@am__fastdepCC_FALSE@ DEPDIR=$(DEPDIR) $(CCDEPMODE) $(depcomp) @AMDEPBACKSLASH@
@am__fastdepCC_FALSE@ $(CC) $(DEFS) $(DEFAULT_INCLUDES) $(INCLUDES) $(xz_CPPFLAGS) $(CPPFLAGS) $(AM_CFLAGS) $(CFLAGS) -c -o xz-hardware.o `test -f 'hardware.c' || echo '$(srcdir)/'`hardware.c
xz-hardware.obj: hardware.c
@am__fastdepCC_TRUE@ $(CC) $(DEFS) $(DEFAULT_INCLUDES) $(INCLUDES) $(xz_CPPFLAGS) $(CPPFLAGS) $(AM_CFLAGS) $(CFLAGS) -MT xz-hardware.obj -MD -MP -MF $(DEPDIR)/xz-hardware.Tpo -c -o xz-hardware.obj `if test -f 'hardware.c'; then $(CYGPATH_W) 'hardware.c'; else $(CYGPATH_W) '$(srcdir)/hardware.c'; fi`
-@am__fastdepCC_TRUE@ mv -f $(DEPDIR)/xz-hardware.Tpo $(DEPDIR)/xz-hardware.Po
+@am__fastdepCC_TRUE@ $(am__mv) $(DEPDIR)/xz-hardware.Tpo $(DEPDIR)/xz-hardware.Po
@AMDEP_TRUE@@am__fastdepCC_FALSE@ source='hardware.c' object='xz-hardware.obj' libtool=no @AMDEPBACKSLASH@
@AMDEP_TRUE@@am__fastdepCC_FALSE@ DEPDIR=$(DEPDIR) $(CCDEPMODE) $(depcomp) @AMDEPBACKSLASH@
@am__fastdepCC_FALSE@ $(CC) $(DEFS) $(DEFAULT_INCLUDES) $(INCLUDES) $(xz_CPPFLAGS) $(CPPFLAGS) $(AM_CFLAGS) $(CFLAGS) -c -o xz-hardware.obj `if test -f 'hardware.c'; then $(CYGPATH_W) 'hardware.c'; else $(CYGPATH_W) '$(srcdir)/hardware.c'; fi`
-xz-io.o: io.c
-@am__fastdepCC_TRUE@ $(CC) $(DEFS) $(DEFAULT_INCLUDES) $(INCLUDES) $(xz_CPPFLAGS) $(CPPFLAGS) $(AM_CFLAGS) $(CFLAGS) -MT xz-io.o -MD -MP -MF $(DEPDIR)/xz-io.Tpo -c -o xz-io.o `test -f 'io.c' || echo '$(srcdir)/'`io.c
-@am__fastdepCC_TRUE@ mv -f $(DEPDIR)/xz-io.Tpo $(DEPDIR)/xz-io.Po
-@AMDEP_TRUE@@am__fastdepCC_FALSE@ source='io.c' object='xz-io.o' libtool=no @AMDEPBACKSLASH@
-@AMDEP_TRUE@@am__fastdepCC_FALSE@ DEPDIR=$(DEPDIR) $(CCDEPMODE) $(depcomp) @AMDEPBACKSLASH@
-@am__fastdepCC_FALSE@ $(CC) $(DEFS) $(DEFAULT_INCLUDES) $(INCLUDES) $(xz_CPPFLAGS) $(CPPFLAGS) $(AM_CFLAGS) $(CFLAGS) -c -o xz-io.o `test -f 'io.c' || echo '$(srcdir)/'`io.c
-
-xz-io.obj: io.c
-@am__fastdepCC_TRUE@ $(CC) $(DEFS) $(DEFAULT_INCLUDES) $(INCLUDES) $(xz_CPPFLAGS) $(CPPFLAGS) $(AM_CFLAGS) $(CFLAGS) -MT xz-io.obj -MD -MP -MF $(DEPDIR)/xz-io.Tpo -c -o xz-io.obj `if test -f 'io.c'; then $(CYGPATH_W) 'io.c'; else $(CYGPATH_W) '$(srcdir)/io.c'; fi`
-@am__fastdepCC_TRUE@ mv -f $(DEPDIR)/xz-io.Tpo $(DEPDIR)/xz-io.Po
-@AMDEP_TRUE@@am__fastdepCC_FALSE@ source='io.c' object='xz-io.obj' libtool=no @AMDEPBACKSLASH@
-@AMDEP_TRUE@@am__fastdepCC_FALSE@ DEPDIR=$(DEPDIR) $(CCDEPMODE) $(depcomp) @AMDEPBACKSLASH@
-@am__fastdepCC_FALSE@ $(CC) $(DEFS) $(DEFAULT_INCLUDES) $(INCLUDES) $(xz_CPPFLAGS) $(CPPFLAGS) $(AM_CFLAGS) $(CFLAGS) -c -o xz-io.obj `if test -f 'io.c'; then $(CYGPATH_W) 'io.c'; else $(CYGPATH_W) '$(srcdir)/io.c'; fi`
-
xz-main.o: main.c
@am__fastdepCC_TRUE@ $(CC) $(DEFS) $(DEFAULT_INCLUDES) $(INCLUDES) $(xz_CPPFLAGS) $(CPPFLAGS) $(AM_CFLAGS) $(CFLAGS) -MT xz-main.o -MD -MP -MF $(DEPDIR)/xz-main.Tpo -c -o xz-main.o `test -f 'main.c' || echo '$(srcdir)/'`main.c
-@am__fastdepCC_TRUE@ mv -f $(DEPDIR)/xz-main.Tpo $(DEPDIR)/xz-main.Po
+@am__fastdepCC_TRUE@ $(am__mv) $(DEPDIR)/xz-main.Tpo $(DEPDIR)/xz-main.Po
@AMDEP_TRUE@@am__fastdepCC_FALSE@ source='main.c' object='xz-main.o' libtool=no @AMDEPBACKSLASH@
@AMDEP_TRUE@@am__fastdepCC_FALSE@ DEPDIR=$(DEPDIR) $(CCDEPMODE) $(depcomp) @AMDEPBACKSLASH@
@am__fastdepCC_FALSE@ $(CC) $(DEFS) $(DEFAULT_INCLUDES) $(INCLUDES) $(xz_CPPFLAGS) $(CPPFLAGS) $(AM_CFLAGS) $(CFLAGS) -c -o xz-main.o `test -f 'main.c' || echo '$(srcdir)/'`main.c
xz-main.obj: main.c
@am__fastdepCC_TRUE@ $(CC) $(DEFS) $(DEFAULT_INCLUDES) $(INCLUDES) $(xz_CPPFLAGS) $(CPPFLAGS) $(AM_CFLAGS) $(CFLAGS) -MT xz-main.obj -MD -MP -MF $(DEPDIR)/xz-main.Tpo -c -o xz-main.obj `if test -f 'main.c'; then $(CYGPATH_W) 'main.c'; else $(CYGPATH_W) '$(srcdir)/main.c'; fi`
-@am__fastdepCC_TRUE@ mv -f $(DEPDIR)/xz-main.Tpo $(DEPDIR)/xz-main.Po
+@am__fastdepCC_TRUE@ $(am__mv) $(DEPDIR)/xz-main.Tpo $(DEPDIR)/xz-main.Po
@AMDEP_TRUE@@am__fastdepCC_FALSE@ source='main.c' object='xz-main.obj' libtool=no @AMDEPBACKSLASH@
@AMDEP_TRUE@@am__fastdepCC_FALSE@ DEPDIR=$(DEPDIR) $(CCDEPMODE) $(depcomp) @AMDEPBACKSLASH@
@am__fastdepCC_FALSE@ $(CC) $(DEFS) $(DEFAULT_INCLUDES) $(INCLUDES) $(xz_CPPFLAGS) $(CPPFLAGS) $(AM_CFLAGS) $(CFLAGS) -c -o xz-main.obj `if test -f 'main.c'; then $(CYGPATH_W) 'main.c'; else $(CYGPATH_W) '$(srcdir)/main.c'; fi`
xz-message.o: message.c
@am__fastdepCC_TRUE@ $(CC) $(DEFS) $(DEFAULT_INCLUDES) $(INCLUDES) $(xz_CPPFLAGS) $(CPPFLAGS) $(AM_CFLAGS) $(CFLAGS) -MT xz-message.o -MD -MP -MF $(DEPDIR)/xz-message.Tpo -c -o xz-message.o `test -f 'message.c' || echo '$(srcdir)/'`message.c
-@am__fastdepCC_TRUE@ mv -f $(DEPDIR)/xz-message.Tpo $(DEPDIR)/xz-message.Po
+@am__fastdepCC_TRUE@ $(am__mv) $(DEPDIR)/xz-message.Tpo $(DEPDIR)/xz-message.Po
@AMDEP_TRUE@@am__fastdepCC_FALSE@ source='message.c' object='xz-message.o' libtool=no @AMDEPBACKSLASH@
@AMDEP_TRUE@@am__fastdepCC_FALSE@ DEPDIR=$(DEPDIR) $(CCDEPMODE) $(depcomp) @AMDEPBACKSLASH@
@am__fastdepCC_FALSE@ $(CC) $(DEFS) $(DEFAULT_INCLUDES) $(INCLUDES) $(xz_CPPFLAGS) $(CPPFLAGS) $(AM_CFLAGS) $(CFLAGS) -c -o xz-message.o `test -f 'message.c' || echo '$(srcdir)/'`message.c
xz-message.obj: message.c
@am__fastdepCC_TRUE@ $(CC) $(DEFS) $(DEFAULT_INCLUDES) $(INCLUDES) $(xz_CPPFLAGS) $(CPPFLAGS) $(AM_CFLAGS) $(CFLAGS) -MT xz-message.obj -MD -MP -MF $(DEPDIR)/xz-message.Tpo -c -o xz-message.obj `if test -f 'message.c'; then $(CYGPATH_W) 'message.c'; else $(CYGPATH_W) '$(srcdir)/message.c'; fi`
-@am__fastdepCC_TRUE@ mv -f $(DEPDIR)/xz-message.Tpo $(DEPDIR)/xz-message.Po
+@am__fastdepCC_TRUE@ $(am__mv) $(DEPDIR)/xz-message.Tpo $(DEPDIR)/xz-message.Po
@AMDEP_TRUE@@am__fastdepCC_FALSE@ source='message.c' object='xz-message.obj' libtool=no @AMDEPBACKSLASH@
@AMDEP_TRUE@@am__fastdepCC_FALSE@ DEPDIR=$(DEPDIR) $(CCDEPMODE) $(depcomp) @AMDEPBACKSLASH@
@am__fastdepCC_FALSE@ $(CC) $(DEFS) $(DEFAULT_INCLUDES) $(INCLUDES) $(xz_CPPFLAGS) $(CPPFLAGS) $(AM_CFLAGS) $(CFLAGS) -c -o xz-message.obj `if test -f 'message.c'; then $(CYGPATH_W) 'message.c'; else $(CYGPATH_W) '$(srcdir)/message.c'; fi`
xz-options.o: options.c
@am__fastdepCC_TRUE@ $(CC) $(DEFS) $(DEFAULT_INCLUDES) $(INCLUDES) $(xz_CPPFLAGS) $(CPPFLAGS) $(AM_CFLAGS) $(CFLAGS) -MT xz-options.o -MD -MP -MF $(DEPDIR)/xz-options.Tpo -c -o xz-options.o `test -f 'options.c' || echo '$(srcdir)/'`options.c
-@am__fastdepCC_TRUE@ mv -f $(DEPDIR)/xz-options.Tpo $(DEPDIR)/xz-options.Po
+@am__fastdepCC_TRUE@ $(am__mv) $(DEPDIR)/xz-options.Tpo $(DEPDIR)/xz-options.Po
@AMDEP_TRUE@@am__fastdepCC_FALSE@ source='options.c' object='xz-options.o' libtool=no @AMDEPBACKSLASH@
@AMDEP_TRUE@@am__fastdepCC_FALSE@ DEPDIR=$(DEPDIR) $(CCDEPMODE) $(depcomp) @AMDEPBACKSLASH@
@am__fastdepCC_FALSE@ $(CC) $(DEFS) $(DEFAULT_INCLUDES) $(INCLUDES) $(xz_CPPFLAGS) $(CPPFLAGS) $(AM_CFLAGS) $(CFLAGS) -c -o xz-options.o `test -f 'options.c' || echo '$(srcdir)/'`options.c
xz-options.obj: options.c
@am__fastdepCC_TRUE@ $(CC) $(DEFS) $(DEFAULT_INCLUDES) $(INCLUDES) $(xz_CPPFLAGS) $(CPPFLAGS) $(AM_CFLAGS) $(CFLAGS) -MT xz-options.obj -MD -MP -MF $(DEPDIR)/xz-options.Tpo -c -o xz-options.obj `if test -f 'options.c'; then $(CYGPATH_W) 'options.c'; else $(CYGPATH_W) '$(srcdir)/options.c'; fi`
-@am__fastdepCC_TRUE@ mv -f $(DEPDIR)/xz-options.Tpo $(DEPDIR)/xz-options.Po
+@am__fastdepCC_TRUE@ $(am__mv) $(DEPDIR)/xz-options.Tpo $(DEPDIR)/xz-options.Po
@AMDEP_TRUE@@am__fastdepCC_FALSE@ source='options.c' object='xz-options.obj' libtool=no @AMDEPBACKSLASH@
@AMDEP_TRUE@@am__fastdepCC_FALSE@ DEPDIR=$(DEPDIR) $(CCDEPMODE) $(depcomp) @AMDEPBACKSLASH@
@am__fastdepCC_FALSE@ $(CC) $(DEFS) $(DEFAULT_INCLUDES) $(INCLUDES) $(xz_CPPFLAGS) $(CPPFLAGS) $(AM_CFLAGS) $(CFLAGS) -c -o xz-options.obj `if test -f 'options.c'; then $(CYGPATH_W) 'options.c'; else $(CYGPATH_W) '$(srcdir)/options.c'; fi`
-xz-process.o: process.c
-@am__fastdepCC_TRUE@ $(CC) $(DEFS) $(DEFAULT_INCLUDES) $(INCLUDES) $(xz_CPPFLAGS) $(CPPFLAGS) $(AM_CFLAGS) $(CFLAGS) -MT xz-process.o -MD -MP -MF $(DEPDIR)/xz-process.Tpo -c -o xz-process.o `test -f 'process.c' || echo '$(srcdir)/'`process.c
-@am__fastdepCC_TRUE@ mv -f $(DEPDIR)/xz-process.Tpo $(DEPDIR)/xz-process.Po
-@AMDEP_TRUE@@am__fastdepCC_FALSE@ source='process.c' object='xz-process.o' libtool=no @AMDEPBACKSLASH@
-@AMDEP_TRUE@@am__fastdepCC_FALSE@ DEPDIR=$(DEPDIR) $(CCDEPMODE) $(depcomp) @AMDEPBACKSLASH@
-@am__fastdepCC_FALSE@ $(CC) $(DEFS) $(DEFAULT_INCLUDES) $(INCLUDES) $(xz_CPPFLAGS) $(CPPFLAGS) $(AM_CFLAGS) $(CFLAGS) -c -o xz-process.o `test -f 'process.c' || echo '$(srcdir)/'`process.c
-
-xz-process.obj: process.c
-@am__fastdepCC_TRUE@ $(CC) $(DEFS) $(DEFAULT_INCLUDES) $(INCLUDES) $(xz_CPPFLAGS) $(CPPFLAGS) $(AM_CFLAGS) $(CFLAGS) -MT xz-process.obj -MD -MP -MF $(DEPDIR)/xz-process.Tpo -c -o xz-process.obj `if test -f 'process.c'; then $(CYGPATH_W) 'process.c'; else $(CYGPATH_W) '$(srcdir)/process.c'; fi`
-@am__fastdepCC_TRUE@ mv -f $(DEPDIR)/xz-process.Tpo $(DEPDIR)/xz-process.Po
-@AMDEP_TRUE@@am__fastdepCC_FALSE@ source='process.c' object='xz-process.obj' libtool=no @AMDEPBACKSLASH@
-@AMDEP_TRUE@@am__fastdepCC_FALSE@ DEPDIR=$(DEPDIR) $(CCDEPMODE) $(depcomp) @AMDEPBACKSLASH@
-@am__fastdepCC_FALSE@ $(CC) $(DEFS) $(DEFAULT_INCLUDES) $(INCLUDES) $(xz_CPPFLAGS) $(CPPFLAGS) $(AM_CFLAGS) $(CFLAGS) -c -o xz-process.obj `if test -f 'process.c'; then $(CYGPATH_W) 'process.c'; else $(CYGPATH_W) '$(srcdir)/process.c'; fi`
-
xz-signals.o: signals.c
@am__fastdepCC_TRUE@ $(CC) $(DEFS) $(DEFAULT_INCLUDES) $(INCLUDES) $(xz_CPPFLAGS) $(CPPFLAGS) $(AM_CFLAGS) $(CFLAGS) -MT xz-signals.o -MD -MP -MF $(DEPDIR)/xz-signals.Tpo -c -o xz-signals.o `test -f 'signals.c' || echo '$(srcdir)/'`signals.c
-@am__fastdepCC_TRUE@ mv -f $(DEPDIR)/xz-signals.Tpo $(DEPDIR)/xz-signals.Po
+@am__fastdepCC_TRUE@ $(am__mv) $(DEPDIR)/xz-signals.Tpo $(DEPDIR)/xz-signals.Po
@AMDEP_TRUE@@am__fastdepCC_FALSE@ source='signals.c' object='xz-signals.o' libtool=no @AMDEPBACKSLASH@
@AMDEP_TRUE@@am__fastdepCC_FALSE@ DEPDIR=$(DEPDIR) $(CCDEPMODE) $(depcomp) @AMDEPBACKSLASH@
@am__fastdepCC_FALSE@ $(CC) $(DEFS) $(DEFAULT_INCLUDES) $(INCLUDES) $(xz_CPPFLAGS) $(CPPFLAGS) $(AM_CFLAGS) $(CFLAGS) -c -o xz-signals.o `test -f 'signals.c' || echo '$(srcdir)/'`signals.c
xz-signals.obj: signals.c
@am__fastdepCC_TRUE@ $(CC) $(DEFS) $(DEFAULT_INCLUDES) $(INCLUDES) $(xz_CPPFLAGS) $(CPPFLAGS) $(AM_CFLAGS) $(CFLAGS) -MT xz-signals.obj -MD -MP -MF $(DEPDIR)/xz-signals.Tpo -c -o xz-signals.obj `if test -f 'signals.c'; then $(CYGPATH_W) 'signals.c'; else $(CYGPATH_W) '$(srcdir)/signals.c'; fi`
-@am__fastdepCC_TRUE@ mv -f $(DEPDIR)/xz-signals.Tpo $(DEPDIR)/xz-signals.Po
+@am__fastdepCC_TRUE@ $(am__mv) $(DEPDIR)/xz-signals.Tpo $(DEPDIR)/xz-signals.Po
@AMDEP_TRUE@@am__fastdepCC_FALSE@ source='signals.c' object='xz-signals.obj' libtool=no @AMDEPBACKSLASH@
@AMDEP_TRUE@@am__fastdepCC_FALSE@ DEPDIR=$(DEPDIR) $(CCDEPMODE) $(depcomp) @AMDEPBACKSLASH@
@am__fastdepCC_FALSE@ $(CC) $(DEFS) $(DEFAULT_INCLUDES) $(INCLUDES) $(xz_CPPFLAGS) $(CPPFLAGS) $(AM_CFLAGS) $(CFLAGS) -c -o xz-signals.obj `if test -f 'signals.c'; then $(CYGPATH_W) 'signals.c'; else $(CYGPATH_W) '$(srcdir)/signals.c'; fi`
xz-suffix.o: suffix.c
@am__fastdepCC_TRUE@ $(CC) $(DEFS) $(DEFAULT_INCLUDES) $(INCLUDES) $(xz_CPPFLAGS) $(CPPFLAGS) $(AM_CFLAGS) $(CFLAGS) -MT xz-suffix.o -MD -MP -MF $(DEPDIR)/xz-suffix.Tpo -c -o xz-suffix.o `test -f 'suffix.c' || echo '$(srcdir)/'`suffix.c
-@am__fastdepCC_TRUE@ mv -f $(DEPDIR)/xz-suffix.Tpo $(DEPDIR)/xz-suffix.Po
+@am__fastdepCC_TRUE@ $(am__mv) $(DEPDIR)/xz-suffix.Tpo $(DEPDIR)/xz-suffix.Po
@AMDEP_TRUE@@am__fastdepCC_FALSE@ source='suffix.c' object='xz-suffix.o' libtool=no @AMDEPBACKSLASH@
@AMDEP_TRUE@@am__fastdepCC_FALSE@ DEPDIR=$(DEPDIR) $(CCDEPMODE) $(depcomp) @AMDEPBACKSLASH@
@am__fastdepCC_FALSE@ $(CC) $(DEFS) $(DEFAULT_INCLUDES) $(INCLUDES) $(xz_CPPFLAGS) $(CPPFLAGS) $(AM_CFLAGS) $(CFLAGS) -c -o xz-suffix.o `test -f 'suffix.c' || echo '$(srcdir)/'`suffix.c
xz-suffix.obj: suffix.c
@am__fastdepCC_TRUE@ $(CC) $(DEFS) $(DEFAULT_INCLUDES) $(INCLUDES) $(xz_CPPFLAGS) $(CPPFLAGS) $(AM_CFLAGS) $(CFLAGS) -MT xz-suffix.obj -MD -MP -MF $(DEPDIR)/xz-suffix.Tpo -c -o xz-suffix.obj `if test -f 'suffix.c'; then $(CYGPATH_W) 'suffix.c'; else $(CYGPATH_W) '$(srcdir)/suffix.c'; fi`
-@am__fastdepCC_TRUE@ mv -f $(DEPDIR)/xz-suffix.Tpo $(DEPDIR)/xz-suffix.Po
+@am__fastdepCC_TRUE@ $(am__mv) $(DEPDIR)/xz-suffix.Tpo $(DEPDIR)/xz-suffix.Po
@AMDEP_TRUE@@am__fastdepCC_FALSE@ source='suffix.c' object='xz-suffix.obj' libtool=no @AMDEPBACKSLASH@
@AMDEP_TRUE@@am__fastdepCC_FALSE@ DEPDIR=$(DEPDIR) $(CCDEPMODE) $(depcomp) @AMDEPBACKSLASH@
@am__fastdepCC_FALSE@ $(CC) $(DEFS) $(DEFAULT_INCLUDES) $(INCLUDES) $(xz_CPPFLAGS) $(CPPFLAGS) $(AM_CFLAGS) $(CFLAGS) -c -o xz-suffix.obj `if test -f 'suffix.c'; then $(CYGPATH_W) 'suffix.c'; else $(CYGPATH_W) '$(srcdir)/suffix.c'; fi`
xz-util.o: util.c
@am__fastdepCC_TRUE@ $(CC) $(DEFS) $(DEFAULT_INCLUDES) $(INCLUDES) $(xz_CPPFLAGS) $(CPPFLAGS) $(AM_CFLAGS) $(CFLAGS) -MT xz-util.o -MD -MP -MF $(DEPDIR)/xz-util.Tpo -c -o xz-util.o `test -f 'util.c' || echo '$(srcdir)/'`util.c
-@am__fastdepCC_TRUE@ mv -f $(DEPDIR)/xz-util.Tpo $(DEPDIR)/xz-util.Po
+@am__fastdepCC_TRUE@ $(am__mv) $(DEPDIR)/xz-util.Tpo $(DEPDIR)/xz-util.Po
@AMDEP_TRUE@@am__fastdepCC_FALSE@ source='util.c' object='xz-util.o' libtool=no @AMDEPBACKSLASH@
@AMDEP_TRUE@@am__fastdepCC_FALSE@ DEPDIR=$(DEPDIR) $(CCDEPMODE) $(depcomp) @AMDEPBACKSLASH@
@am__fastdepCC_FALSE@ $(CC) $(DEFS) $(DEFAULT_INCLUDES) $(INCLUDES) $(xz_CPPFLAGS) $(CPPFLAGS) $(AM_CFLAGS) $(CFLAGS) -c -o xz-util.o `test -f 'util.c' || echo '$(srcdir)/'`util.c
xz-util.obj: util.c
@am__fastdepCC_TRUE@ $(CC) $(DEFS) $(DEFAULT_INCLUDES) $(INCLUDES) $(xz_CPPFLAGS) $(CPPFLAGS) $(AM_CFLAGS) $(CFLAGS) -MT xz-util.obj -MD -MP -MF $(DEPDIR)/xz-util.Tpo -c -o xz-util.obj `if test -f 'util.c'; then $(CYGPATH_W) 'util.c'; else $(CYGPATH_W) '$(srcdir)/util.c'; fi`
-@am__fastdepCC_TRUE@ mv -f $(DEPDIR)/xz-util.Tpo $(DEPDIR)/xz-util.Po
+@am__fastdepCC_TRUE@ $(am__mv) $(DEPDIR)/xz-util.Tpo $(DEPDIR)/xz-util.Po
@AMDEP_TRUE@@am__fastdepCC_FALSE@ source='util.c' object='xz-util.obj' libtool=no @AMDEPBACKSLASH@
@AMDEP_TRUE@@am__fastdepCC_FALSE@ DEPDIR=$(DEPDIR) $(CCDEPMODE) $(depcomp) @AMDEPBACKSLASH@
@am__fastdepCC_FALSE@ $(CC) $(DEFS) $(DEFAULT_INCLUDES) $(INCLUDES) $(xz_CPPFLAGS) $(CPPFLAGS) $(AM_CFLAGS) $(CFLAGS) -c -o xz-util.obj `if test -f 'util.c'; then $(CYGPATH_W) 'util.c'; else $(CYGPATH_W) '$(srcdir)/util.c'; fi`
@@ -493,6 +548,44 @@ mostlyclean-libtool:
clean-libtool:
-rm -rf .libs _libs
+install-man1: $(dist_man_MANS)
+ @$(NORMAL_INSTALL)
+ test -z "$(man1dir)" || $(MKDIR_P) "$(DESTDIR)$(man1dir)"
+ @list=''; test -n "$(man1dir)" || exit 0; \
+ { for i in $$list; do echo "$$i"; done; \
+ l2='$(dist_man_MANS)'; for i in $$l2; do echo "$$i"; done | \
+ sed -n '/\.1[a-z]*$$/p'; \
+ } | while read p; do \
+ if test -f $$p; then d=; else d="$(srcdir)/"; fi; \
+ echo "$$d$$p"; echo "$$p"; \
+ done | \
+ sed -e 'n;s,.*/,,;p;h;s,.*\.,,;s,^[^1][0-9a-z]*$$,1,;x' \
+ -e 's,\.[0-9a-z]*$$,,;$(transform);G;s,\n,.,' | \
+ sed 'N;N;s,\n, ,g' | { \
+ list=; while read file base inst; do \
+ if test "$$base" = "$$inst"; then list="$$list $$file"; else \
+ echo " $(INSTALL_DATA) '$$file' '$(DESTDIR)$(man1dir)/$$inst'"; \
+ $(INSTALL_DATA) "$$file" "$(DESTDIR)$(man1dir)/$$inst" || exit $$?; \
+ fi; \
+ done; \
+ for i in $$list; do echo "$$i"; done | $(am__base_list) | \
+ while read files; do \
+ test -z "$$files" || { \
+ echo " $(INSTALL_DATA) $$files '$(DESTDIR)$(man1dir)'"; \
+ $(INSTALL_DATA) $$files "$(DESTDIR)$(man1dir)" || exit $$?; }; \
+ done; }
+
+uninstall-man1:
+ @$(NORMAL_UNINSTALL)
+ @list=''; test -n "$(man1dir)" || exit 0; \
+ files=`{ for i in $$list; do echo "$$i"; done; \
+ l2='$(dist_man_MANS)'; for i in $$l2; do echo "$$i"; done | \
+ sed -n '/\.1[a-z]*$$/p'; \
+ } | sed -e 's,.*/,,;h;s,.*\.,,;s,^[^1][0-9a-z]*$$,1,;x' \
+ -e 's,\.[0-9a-z]*$$,,;$(transform);G;s,\n,.,'`; \
+ test -z "$$files" || { \
+ echo " ( cd '$(DESTDIR)$(man1dir)' && rm -f" $$files ")"; \
+ cd "$(DESTDIR)$(man1dir)" && rm -f $$files; }
ID: $(HEADERS) $(SOURCES) $(LISP) $(TAGS_FILES)
list='$(SOURCES) $(HEADERS) $(LISP) $(TAGS_FILES)'; \
@@ -506,7 +599,7 @@ tags: TAGS
TAGS: $(HEADERS) $(SOURCES) $(TAGS_DEPENDENCIES) \
$(TAGS_FILES) $(LISP)
- tags=; \
+ set x; \
here=`pwd`; \
list='$(SOURCES) $(HEADERS) $(LISP) $(TAGS_FILES)'; \
unique=`for i in $$list; do \
@@ -514,34 +607,52 @@ TAGS: $(HEADERS) $(SOURCES) $(TAGS_DEPENDENCIES) \
done | \
$(AWK) '{ files[$$0] = 1; nonempty = 1; } \
END { if (nonempty) { for (i in files) print i; }; }'`; \
- if test -z "$(ETAGS_ARGS)$$tags$$unique"; then :; else \
+ shift; \
+ if test -z "$(ETAGS_ARGS)$$*$$unique"; then :; else \
test -n "$$unique" || unique=$$empty_fix; \
- $(ETAGS) $(ETAGSFLAGS) $(AM_ETAGSFLAGS) $(ETAGS_ARGS) \
- $$tags $$unique; \
+ if test $$# -gt 0; then \
+ $(ETAGS) $(ETAGSFLAGS) $(AM_ETAGSFLAGS) $(ETAGS_ARGS) \
+ "$$@" $$unique; \
+ else \
+ $(ETAGS) $(ETAGSFLAGS) $(AM_ETAGSFLAGS) $(ETAGS_ARGS) \
+ $$unique; \
+ fi; \
fi
ctags: CTAGS
CTAGS: $(HEADERS) $(SOURCES) $(TAGS_DEPENDENCIES) \
$(TAGS_FILES) $(LISP)
- tags=; \
list='$(SOURCES) $(HEADERS) $(LISP) $(TAGS_FILES)'; \
unique=`for i in $$list; do \
if test -f "$$i"; then echo $$i; else echo $(srcdir)/$$i; fi; \
done | \
$(AWK) '{ files[$$0] = 1; nonempty = 1; } \
END { if (nonempty) { for (i in files) print i; }; }'`; \
- test -z "$(CTAGS_ARGS)$$tags$$unique" \
+ test -z "$(CTAGS_ARGS)$$unique" \
|| $(CTAGS) $(CTAGSFLAGS) $(AM_CTAGSFLAGS) $(CTAGS_ARGS) \
- $$tags $$unique
+ $$unique
GTAGS:
here=`$(am__cd) $(top_builddir) && pwd` \
- && cd $(top_srcdir) \
- && gtags -i $(GTAGS_ARGS) $$here
+ && $(am__cd) $(top_srcdir) \
+ && gtags -i $(GTAGS_ARGS) "$$here"
distclean-tags:
-rm -f TAGS ID GTAGS GRTAGS GSYMS GPATH tags
distdir: $(DISTFILES)
+ @list='$(MANS)'; if test -n "$$list"; then \
+ list=`for p in $$list; do \
+ if test -f $$p; then d=; else d="$(srcdir)/"; fi; \
+ if test -f "$$d$$p"; then echo "$$d$$p"; else :; fi; done`; \
+ if test -n "$$list" && \
+ grep 'ab help2man is required to generate this page' $$list >/dev/null; then \
+ echo "error: found man pages containing the \`missing help2man' replacement text:" >&2; \
+ grep -l 'ab help2man is required to generate this page' $$list | sed 's/^/ /' >&2; \
+ echo " to fix them, install help2man, remove and regenerate the man pages;" >&2; \
+ echo " typically \`make maintainer-clean' will remove them" >&2; \
+ exit 1; \
+ else :; fi; \
+ else :; fi
@srcdirstrip=`echo "$(srcdir)" | sed 's/[].[^$$\\*]/\\\\&/g'`; \
topsrcdirstrip=`echo "$(top_srcdir)" | sed 's/[].[^$$\\*]/\\\\&/g'`; \
list='$(DISTFILES)'; \
@@ -557,21 +668,25 @@ distdir: $(DISTFILES)
if test -f $$file || test -d $$file; then d=.; else d=$(srcdir); fi; \
if test -d $$d/$$file; then \
dir=`echo "/$$file" | sed -e 's,/[^/]*$$,,'`; \
+ if test -d "$(distdir)/$$file"; then \
+ find "$(distdir)/$$file" -type d ! -perm -700 -exec chmod u+rwx {} \;; \
+ fi; \
if test -d $(srcdir)/$$file && test $$d != $(srcdir); then \
- cp -pR $(srcdir)/$$file $(distdir)$$dir || exit 1; \
+ cp -fpR $(srcdir)/$$file "$(distdir)$$dir" || exit 1; \
+ find "$(distdir)/$$file" -type d ! -perm -700 -exec chmod u+rwx {} \;; \
fi; \
- cp -pR $$d/$$file $(distdir)$$dir || exit 1; \
+ cp -fpR $$d/$$file "$(distdir)$$dir" || exit 1; \
else \
- test -f $(distdir)/$$file \
- || cp -p $$d/$$file $(distdir)/$$file \
+ test -f "$(distdir)/$$file" \
+ || cp -p $$d/$$file "$(distdir)/$$file" \
|| exit 1; \
fi; \
done
check-am: all-am
check: check-am
-all-am: Makefile $(PROGRAMS)
+all-am: Makefile $(PROGRAMS) $(MANS)
installdirs:
- for dir in "$(DESTDIR)$(bindir)"; do \
+ for dir in "$(DESTDIR)$(bindir)" "$(DESTDIR)$(man1dir)"; do \
test -z "$$dir" || $(MKDIR_P) "$$dir"; \
done
install: install-am
@@ -594,6 +709,7 @@ clean-generic:
distclean-generic:
-test -z "$(CONFIG_CLEAN_FILES)" || rm -f $(CONFIG_CLEAN_FILES)
+ -test . = "$(srcdir)" || test -z "$(CONFIG_CLEAN_VPATH_FILES)" || rm -f $(CONFIG_CLEAN_VPATH_FILES)
maintainer-clean-generic:
@echo "This command is intended for maintainers to use"
@@ -614,28 +730,40 @@ dvi-am:
html: html-am
+html-am:
+
info: info-am
info-am:
-install-data-am:
-
+install-data-am: install-man
+ @$(NORMAL_INSTALL)
+ $(MAKE) $(AM_MAKEFLAGS) install-data-hook
install-dvi: install-dvi-am
+install-dvi-am:
+
install-exec-am: install-binPROGRAMS
@$(NORMAL_INSTALL)
$(MAKE) $(AM_MAKEFLAGS) install-exec-hook
-
install-html: install-html-am
+install-html-am:
+
install-info: install-info-am
-install-man:
+install-info-am:
+
+install-man: install-man1
install-pdf: install-pdf-am
+install-pdf-am:
+
install-ps: install-ps-am
+install-ps-am:
+
installcheck-am:
maintainer-clean: maintainer-clean-am
@@ -656,39 +784,66 @@ ps: ps-am
ps-am:
-uninstall-am: uninstall-binPROGRAMS
+uninstall-am: uninstall-binPROGRAMS uninstall-man
@$(NORMAL_INSTALL)
$(MAKE) $(AM_MAKEFLAGS) uninstall-hook
+uninstall-man: uninstall-man1
-.MAKE: install-am install-exec-am install-strip uninstall-am
+.MAKE: install-am install-data-am install-exec-am install-strip \
+ uninstall-am
.PHONY: CTAGS GTAGS all all-am check check-am clean clean-binPROGRAMS \
clean-generic clean-libtool ctags distclean distclean-compile \
distclean-generic distclean-libtool distclean-tags distdir dvi \
dvi-am html html-am info info-am install install-am \
- install-binPROGRAMS install-data install-data-am install-dvi \
- install-dvi-am install-exec install-exec-am install-exec-hook \
- install-html install-html-am install-info install-info-am \
- install-man install-pdf install-pdf-am install-ps \
- install-ps-am install-strip installcheck installcheck-am \
- installdirs maintainer-clean maintainer-clean-generic \
- mostlyclean mostlyclean-compile mostlyclean-generic \
- mostlyclean-libtool pdf pdf-am ps ps-am tags uninstall \
- uninstall-am uninstall-binPROGRAMS uninstall-hook
-
+ install-binPROGRAMS install-data install-data-am \
+ install-data-hook install-dvi install-dvi-am install-exec \
+ install-exec-am install-exec-hook install-html install-html-am \
+ install-info install-info-am install-man install-man1 \
+ install-pdf install-pdf-am install-ps install-ps-am \
+ install-strip installcheck installcheck-am installdirs \
+ maintainer-clean maintainer-clean-generic mostlyclean \
+ mostlyclean-compile mostlyclean-generic mostlyclean-libtool \
+ pdf pdf-am ps ps-am tags uninstall uninstall-am \
+ uninstall-binPROGRAMS uninstall-hook uninstall-man \
+ uninstall-man1
+
+
+# Windows resource compiler support
+.rc.o:
+ $(RC) $(DEFS) $(DEFAULT_INCLUDES) $(INCLUDES) \
+ $(xz_CPPFLAGS) $(CPPFLAGS) $(RCFLAGS) -i $< -o $@
install-exec-hook:
cd $(DESTDIR)$(bindir) && \
- rm -f unxz xzcat lzma unlzma lzcat && \
- $(LN_S) xz unxz && \
- $(LN_S) xz xzcat && \
- $(LN_S) xz lzma && \
- $(LN_S) xz unlzma && \
- $(LN_S) xz lzcat
+ target=`echo xz | sed '$(transform)'`$(EXEEXT) && \
+ for name in $(xzlinks); do \
+ link=`echo $$name | sed '$(transform)'` && \
+ rm -f $$link && \
+ $(LN_S) $$target $$link; \
+ done
+
+install-data-hook:
+ cd $(DESTDIR)$(mandir)/man1 && \
+ target=`echo xz | sed '$(transform)'` && \
+ for name in $(xzlinks); do \
+ link=`echo $$name | sed '$(transform)'` && \
+ rm -f $$link.1 && \
+ $(LN_S) $$target.1 $$link.1; \
+ done
uninstall-hook:
cd $(DESTDIR)$(bindir) && \
- rm -f unxz xzcat lzma unlzma lzcat
+ for name in $(xzlinks); do \
+ link=`echo $$name | sed '$(transform)'` && \
+ rm -f $$link; \
+ done
+ cd $(DESTDIR)$(mandir)/man1 && \
+ for name in $(xzlinks); do \
+ link=`echo $$name | sed '$(transform)'` && \
+ rm -f $$link.1; \
+ done
+
# Tell versions [3.59,3.63) of GNU make to not export all variables.
# Otherwise a system limit (for SysV at least) may be exceeded.
.NOEXPORT:
diff --git a/Build/source/utils/xz-4.999.8beta/src/xz/args.c b/Build/source/utils/xz-4.999.9beta/src/xz/args.c
index c9d1dc14826..b50e28b7fd9 100644
--- a/Build/source/utils/xz-4.999.8beta/src/xz/args.c
+++ b/Build/source/utils/xz-4.999.9beta/src/xz/args.c
@@ -5,17 +5,10 @@
///
/// \note Filter-specific options parsing is in options.c.
//
-// Copyright (C) 2007 Lasse Collin
+// Author: Lasse Collin
//
-// This program is free software; you can redistribute it and/or
-// modify it under the terms of the GNU Lesser General Public
-// License as published by the Free Software Foundation; either
-// version 2.1 of the License, or (at your option) any later version.
-//
-// This program is distributed in the hope that it will be useful,
-// but WITHOUT ANY WARRANTY; without even the implied warranty of
-// MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the GNU
-// Lesser General Public License for more details.
+// This file has been put into the public domain.
+// You can do whatever you want with this file.
//
///////////////////////////////////////////////////////////////////////////////
@@ -53,7 +46,8 @@ parse_real(args_info *args, int argc, char **argv)
OPT_FILES0,
};
- static const char short_opts[] = "cC:defF:hHlkM:qrS:tT:vVz0123456789";
+ static const char short_opts[]
+ = "cC:defF:hHlkM:qQrS:tT:vVz0123456789";
static const struct option long_opts[] = {
// Operation mode
@@ -62,7 +56,6 @@ parse_real(args_info *args, int argc, char **argv)
{ "uncompress", no_argument, NULL, 'd' },
{ "test", no_argument, NULL, 't' },
{ "list", no_argument, NULL, 'l' },
- { "info", no_argument, NULL, 'l' },
// Operation modifiers
{ "keep", no_argument, NULL, 'k' },
@@ -87,21 +80,19 @@ parse_real(args_info *args, int argc, char **argv)
// Filters
{ "lzma1", optional_argument, NULL, OPT_LZMA1 },
{ "lzma2", optional_argument, NULL, OPT_LZMA2 },
- { "x86", no_argument, NULL, OPT_X86 },
- { "bcj", no_argument, NULL, OPT_X86 },
- { "powerpc", no_argument, NULL, OPT_POWERPC },
- { "ppc", no_argument, NULL, OPT_POWERPC },
- { "ia64", no_argument, NULL, OPT_IA64 },
- { "itanium", no_argument, NULL, OPT_IA64 },
- { "arm", no_argument, NULL, OPT_ARM },
- { "armthumb", no_argument, NULL, OPT_ARMTHUMB },
- { "sparc", no_argument, NULL, OPT_SPARC },
+ { "x86", optional_argument, NULL, OPT_X86 },
+ { "powerpc", optional_argument, NULL, OPT_POWERPC },
+ { "ia64", optional_argument, NULL, OPT_IA64 },
+ { "arm", optional_argument, NULL, OPT_ARM },
+ { "armthumb", optional_argument, NULL, OPT_ARMTHUMB },
+ { "sparc", optional_argument, NULL, OPT_SPARC },
{ "delta", optional_argument, NULL, OPT_DELTA },
{ "subblock", optional_argument, NULL, OPT_SUBBLOCK },
// Other options
{ "quiet", no_argument, NULL, 'q' },
{ "verbose", no_argument, NULL, 'v' },
+ { "no-warn", no_argument, NULL, 'Q' },
{ "help", no_argument, NULL, 'h' },
{ "long-help", no_argument, NULL, 'H' },
{ "version", no_argument, NULL, 'V' },
@@ -121,13 +112,27 @@ parse_real(args_info *args, int argc, char **argv)
break;
// --memory
- case 'M':
- // On 32-bit systems, SIZE_MAX would make more sense
- // than UINT64_MAX. But use UINT64_MAX still so that
- // scripts that assume > 4 GiB values don't break.
- hardware_memlimit_set(str_to_uint64(
- "memory", optarg, 0, UINT64_MAX));
+ case 'M': {
+ // Support specifying the limit as a percentage of
+ // installed physical RAM.
+ size_t len = strlen(optarg);
+ if (len > 0 && optarg[len - 1] == '%') {
+ optarg[len - 1] = '\0';
+ hardware_memlimit_set_percentage(
+ str_to_uint64(
+ "memory%", optarg, 1, 100));
+ } else {
+ // On 32-bit systems, SIZE_MAX would make more
+ // sense than UINT64_MAX. But use UINT64_MAX
+ // still so that scripts that assume > 4 GiB
+ // values don't break.
+ hardware_memlimit_set(str_to_uint64(
+ "memory", optarg,
+ 0, UINT64_MAX));
+ }
+
break;
+ }
// --suffix
case 'S':
@@ -135,8 +140,8 @@ parse_real(args_info *args, int argc, char **argv)
break;
case 'T':
- opt_threads = str_to_uint64("threads", optarg,
- 1, SIZE_MAX);
+ hardware_threadlimit_set(str_to_uint64(
+ "threads", optarg, 0, UINT32_MAX));
break;
// --version
@@ -189,6 +194,10 @@ parse_real(args_info *args, int argc, char **argv)
message_verbosity_decrease();
break;
+ case 'Q':
+ set_exit_no_warn();
+ break;
+
case 't':
opt_mode = MODE_TEST;
break;
@@ -210,27 +219,33 @@ parse_real(args_info *args, int argc, char **argv)
break;
case OPT_X86:
- coder_add_filter(LZMA_FILTER_X86, NULL);
+ coder_add_filter(LZMA_FILTER_X86,
+ options_bcj(optarg));
break;
case OPT_POWERPC:
- coder_add_filter(LZMA_FILTER_POWERPC, NULL);
+ coder_add_filter(LZMA_FILTER_POWERPC,
+ options_bcj(optarg));
break;
case OPT_IA64:
- coder_add_filter(LZMA_FILTER_IA64, NULL);
+ coder_add_filter(LZMA_FILTER_IA64,
+ options_bcj(optarg));
break;
case OPT_ARM:
- coder_add_filter(LZMA_FILTER_ARM, NULL);
+ coder_add_filter(LZMA_FILTER_ARM,
+ options_bcj(optarg));
break;
case OPT_ARMTHUMB:
- coder_add_filter(LZMA_FILTER_ARMTHUMB, NULL);
+ coder_add_filter(LZMA_FILTER_ARMTHUMB,
+ options_bcj(optarg));
break;
case OPT_SPARC:
- coder_add_filter(LZMA_FILTER_SPARC, NULL);
+ coder_add_filter(LZMA_FILTER_SPARC,
+ options_bcj(optarg));
break;
case OPT_DELTA:
@@ -294,10 +309,17 @@ parse_real(args_info *args, int argc, char **argv)
size_t i = 0;
while (strcmp(types[i].str, optarg) != 0) {
if (++i == ARRAY_SIZE(types))
- message_fatal(_("%s: Unknown integrity"
+ message_fatal(_("%s: Unsupported "
+ "integrity "
"check type"), optarg);
}
+ // Use a separate check in case we are using different
+ // liblzma than what was used to compile us.
+ if (!lzma_check_is_supported(types[i].check))
+ message_fatal(_("%s: Unsupported integrity "
+ "check type"), optarg);
+
coder_set_check(types[i].check);
break;
}
@@ -352,7 +374,14 @@ parse_environment(args_info *args, char *argv0)
int argc = 1;
bool prev_was_space = true;
for (size_t i = 0; env[i] != '\0'; ++i) {
- if (isspace(env[i])) {
+ // NOTE: Cast to unsigned char is needed so that correct
+ // value gets passed to isspace(), which expects
+ // unsigned char cast to int. Casting to int is done
+ // automatically due to integer promotion, but we need to
+ // force char to unsigned char manually. Otherwise 8-bit
+ // characters would get promoted to wrong value if
+ // char is signed.
+ if (isspace((unsigned char)env[i])) {
prev_was_space = true;
} else if (prev_was_space) {
prev_was_space = false;
@@ -377,7 +406,7 @@ parse_environment(args_info *args, char *argv0)
argc = 1;
prev_was_space = true;
for (size_t i = 0; env[i] != '\0'; ++i) {
- if (isspace(env[i])) {
+ if (isspace((unsigned char)env[i])) {
prev_was_space = true;
env[i] = '\0';
} else if (prev_was_space) {
@@ -418,35 +447,41 @@ args_parse(args_info *args, int argc, char **argv)
args->files_file = NULL;
args->files_delim = '\0';
- // Type of the file format to use when --format=auto or no --format
- // was specified.
- enum format_type format_compress_auto = FORMAT_XZ;
-
// Check how we were called.
{
+#ifdef DOSLIKE
+ // We adjusted argv[0] in the beginning of main() so we don't
+ // need to do anything here.
+ const char *name = argv[0];
+#else
// Remove the leading path name, if any.
const char *name = strrchr(argv[0], '/');
if (name == NULL)
name = argv[0];
else
++name;
+#endif
// NOTE: It's possible that name[0] is now '\0' if argv[0]
// is weird, but it doesn't matter here.
- // The default file format is .lzma if the command name
- // contains "lz".
- if (strstr(name, "lz") != NULL)
- format_compress_auto = FORMAT_LZMA;
-
- // Operation mode
- if (strstr(name, "cat") != NULL) {
- // Imply --decompress --stdout
+ // Look for full command names instead of substrings like
+ // "un", "cat", and "lz" to reduce possibility of false
+ // positives when the programs have been renamed.
+ if (strstr(name, "xzcat") != NULL) {
opt_mode = MODE_DECOMPRESS;
opt_stdout = true;
- } else if (strstr(name, "un") != NULL) {
- // Imply --decompress
+ } else if (strstr(name, "unxz") != NULL) {
opt_mode = MODE_DECOMPRESS;
+ } else if (strstr(name, "lzcat") != NULL) {
+ opt_format = FORMAT_LZMA;
+ opt_mode = MODE_DECOMPRESS;
+ opt_stdout = true;
+ } else if (strstr(name, "unlzma") != NULL) {
+ opt_format = FORMAT_LZMA;
+ opt_mode = MODE_DECOMPRESS;
+ } else if (strstr(name, "lzma") != NULL) {
+ opt_format = FORMAT_LZMA;
}
}
@@ -454,7 +489,6 @@ args_parse(args_info *args, int argc, char **argv)
parse_environment(args, argv[0]);
// Then from the command line
- optind = 1;
parse_real(args, argc, argv);
// Never remove the source file when the destination is not on disk.
@@ -465,11 +499,10 @@ args_parse(args_info *args, int argc, char **argv)
opt_stdout = true;
}
- // If no --format flag was used, or it was --format=auto, we need to
- // decide what is the target file format we are going to use. This
- // depends on how we were called (checked earlier in this function).
+ // When compressing, if no --format flag was used, or it
+ // was --format=auto, we compress to the .xz format.
if (opt_mode == MODE_COMPRESS && opt_format == FORMAT_AUTO)
- opt_format = format_compress_auto;
+ opt_format = FORMAT_XZ;
// Compression settings need to be validated (options themselves and
// their memory usage) when compressing to any file format. It has to
diff --git a/Build/source/utils/xz-4.999.8beta/src/xz/args.h b/Build/source/utils/xz-4.999.9beta/src/xz/args.h
index b07b210002f..91e43ad65a1 100644
--- a/Build/source/utils/xz-4.999.8beta/src/xz/args.h
+++ b/Build/source/utils/xz-4.999.9beta/src/xz/args.h
@@ -3,17 +3,10 @@
/// \file args.h
/// \brief Argument parsing
//
-// Copyright (C) 2007 Lasse Collin
+// Author: Lasse Collin
//
-// This program is free software; you can redistribute it and/or
-// modify it under the terms of the GNU Lesser General Public
-// License as published by the Free Software Foundation; either
-// version 2.1 of the License, or (at your option) any later version.
-//
-// This program is distributed in the hope that it will be useful,
-// but WITHOUT ANY WARRANTY; without even the implied warranty of
-// MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the GNU
-// Lesser General Public License for more details.
+// This file has been put into the public domain.
+// You can do whatever you want with this file.
//
///////////////////////////////////////////////////////////////////////////////
diff --git a/Build/source/utils/xz-4.999.8beta/src/xz/process.c b/Build/source/utils/xz-4.999.9beta/src/xz/coder.c
index 59c19cd2d0e..7cf6186f806 100644
--- a/Build/source/utils/xz-4.999.8beta/src/xz/process.c
+++ b/Build/source/utils/xz-4.999.9beta/src/xz/coder.c
@@ -1,25 +1,26 @@
///////////////////////////////////////////////////////////////////////////////
//
-/// \file process.c
+/// \file coder.c
/// \brief Compresses or uncompresses a file
//
-// Copyright (C) 2007 Lasse Collin
+// Author: Lasse Collin
//
-// This program is free software; you can redistribute it and/or
-// modify it under the terms of the GNU Lesser General Public
-// License as published by the Free Software Foundation; either
-// version 2.1 of the License, or (at your option) any later version.
-//
-// This program is distributed in the hope that it will be useful,
-// but WITHOUT ANY WARRANTY; without even the implied warranty of
-// MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the GNU
-// Lesser General Public License for more details.
+// This file has been put into the public domain.
+// You can do whatever you want with this file.
//
///////////////////////////////////////////////////////////////////////////////
#include "private.h"
+/// Return value type for coder_init().
+enum coder_init_ret {
+ CODER_INIT_NORMAL,
+ CODER_INIT_PASSTHRU,
+ CODER_INIT_ERROR,
+};
+
+
enum operation_mode opt_mode = MODE_COMPRESS;
enum format_type opt_format = FORMAT_AUTO;
@@ -31,6 +32,10 @@ static lzma_stream strm = LZMA_STREAM_INIT;
/// Filters needed for all encoding all formats, and also decoding in raw data
static lzma_filter filters[LZMA_FILTERS_MAX + 1];
+/// Input and output buffers
+static uint8_t in_buf[IO_BUFFER_SIZE];
+static uint8_t out_buf[IO_BUFFER_SIZE];
+
/// Number of filters. Zero indicates that we are using a preset.
static size_t filters_count = 0;
@@ -51,7 +56,11 @@ static bool preset_default = true;
static bool preset_extreme = false;
/// Integrity check type
+#ifdef HAVE_CHECK_CRC64
static lzma_check check = LZMA_CHECK_CRC64;
+#else
+static lzma_check check = LZMA_CHECK_CRC32;
+#endif
extern void
@@ -142,12 +151,20 @@ coder_set_compression_settings(void)
// Terminate the filter options array.
filters[filters_count].id = LZMA_VLI_UNKNOWN;
- // If we are using the LZMA_Alone format, allow exactly one filter
- // which has to be LZMA.
+ // If we are using the .lzma format, allow exactly one filter
+ // which has to be LZMA1.
if (opt_format == FORMAT_LZMA && (filters_count != 1
|| filters[0].id != LZMA_FILTER_LZMA1))
- message_fatal(_("With --format=lzma only the LZMA1 filter "
- "is supported"));
+ message_fatal(_("The .lzma format supports only "
+ "the LZMA1 filter"));
+
+ // If we are using the .xz format, make sure that there is no LZMA1
+ // filter to prevent LZMA_PROG_ERROR.
+ if (opt_format == FORMAT_XZ)
+ for (size_t i = 0; i < filters_count; ++i)
+ if (filters[i].id == LZMA_FILTER_LZMA1)
+ message_fatal(_("LZMA1 cannot be used "
+ "with the .xz format"));
// Print the selected filter chain.
message_filters(V_DEBUG, filters);
@@ -155,25 +172,23 @@ coder_set_compression_settings(void)
// If using --format=raw, we can be decoding. The memusage function
// also validates the filter chain and the options used for the
// filters.
+ const uint64_t memory_limit = hardware_memlimit_get();
uint64_t memory_usage;
- uint64_t memory_limit;
- if (opt_mode == MODE_COMPRESS) {
+ if (opt_mode == MODE_COMPRESS)
memory_usage = lzma_raw_encoder_memusage(filters);
- memory_limit = hardware_memlimit_encoder();
- } else {
+ else
memory_usage = lzma_raw_decoder_memusage(filters);
- memory_limit = hardware_memlimit_decoder();
- }
if (memory_usage == UINT64_MAX)
message_fatal("Unsupported filter chain or filter options");
// Print memory usage info.
- message(V_DEBUG, _("%'" PRIu64 " MiB (%'" PRIu64 " B) of memory is "
- "required per thread, "
- "limit is %'" PRIu64 " MiB (%'" PRIu64 " B)"),
- memory_usage >> 20, memory_usage,
- memory_limit >> 20, memory_limit);
+ message(V_DEBUG, _("%s MiB (%s B) of memory is required per thread, "
+ "limit is %s MiB (%s B)"),
+ uint64_to_str(memory_usage >> 20, 0),
+ uint64_to_str(memory_usage, 1),
+ uint64_to_str(memory_limit >> 20, 2),
+ uint64_to_str(memory_limit, 3));
if (memory_usage > memory_limit) {
// If --no-auto-adjust was used or we didn't find LZMA1 or
@@ -231,17 +246,16 @@ coder_set_compression_settings(void)
// was given. FIXME: Always warn?
if (!preset_default)
message(V_WARNING, "Adjusted LZMA%c dictionary size "
- "from %'" PRIu32 " MiB to "
- "%'" PRIu32 " MiB to not exceed "
- "the memory usage limit of "
- "%'" PRIu64 " MiB",
+ "from %s MiB to %s MiB to not exceed "
+ "the memory usage limit of %s MiB",
filters[i].id == LZMA_FILTER_LZMA2
? '2' : '1',
- orig_dict_size >> 20,
- opt->dict_size >> 20,
- memory_limit >> 20);
+ uint64_to_str(orig_dict_size >> 20, 0),
+ uint64_to_str(opt->dict_size >> 20, 1),
+ uint64_to_str(memory_limit >> 20, 2));
}
+/*
// Limit the number of worker threads so that memory usage
// limit isn't exceeded.
assert(memory_usage > 0);
@@ -251,13 +265,75 @@ coder_set_compression_settings(void)
if (opt_threads > thread_limit)
opt_threads = thread_limit;
+*/
return;
}
+/// Return true if the data in in_buf seems to be in the .xz format.
+static bool
+is_format_xz(void)
+{
+ return strm.avail_in >= 6 && memcmp(in_buf, "\3757zXZ", 6) == 0;
+}
+
+
+/// Return true if the data in in_buf seems to be in the .lzma format.
static bool
-coder_init(void)
+is_format_lzma(void)
+{
+ // The .lzma header is 13 bytes.
+ if (strm.avail_in < 13)
+ return false;
+
+ // Decode the LZMA1 properties.
+ lzma_filter filter = { .id = LZMA_FILTER_LZMA1 };
+ if (lzma_properties_decode(&filter, NULL, in_buf, 5) != LZMA_OK)
+ return false;
+
+ // A hack to ditch tons of false positives: We allow only dictionary
+ // sizes that are 2^n or 2^n + 2^(n-1) or UINT32_MAX. LZMA_Alone
+ // created only files with 2^n, but accepts any dictionary size.
+ // If someone complains, this will be reconsidered.
+ lzma_options_lzma *opt = filter.options;
+ const uint32_t dict_size = opt->dict_size;
+ free(opt);
+
+ if (dict_size != UINT32_MAX) {
+ uint32_t d = dict_size - 1;
+ d |= d >> 2;
+ d |= d >> 3;
+ d |= d >> 4;
+ d |= d >> 8;
+ d |= d >> 16;
+ ++d;
+ if (d != dict_size || dict_size == 0)
+ return false;
+ }
+
+ // Another hack to ditch false positives: Assume that if the
+ // uncompressed size is known, it must be less than 256 GiB.
+ // Again, if someone complains, this will be reconsidered.
+ uint64_t uncompressed_size = 0;
+ for (size_t i = 0; i < 8; ++i)
+ uncompressed_size |= (uint64_t)(in_buf[5 + i]) << (i * 8);
+
+ if (uncompressed_size != UINT64_MAX
+ && uncompressed_size > (UINT64_C(1) << 38))
+ return false;
+
+ return true;
+}
+
+
+/// Detect the input file type (for now, this done only when decompressing),
+/// and initialize an appropriate coder. Return value indicates if a normal
+/// liblzma-based coder was initialized (CODER_INIT_NORMAL), if passthru
+/// mode should be used (CODER_INIT_PASSTHRU), or if an error occurred
+/// (CODER_INIT_ERROR).
+static enum coder_init_ret
+coder_init(file_pair *pair)
{
lzma_ret ret = LZMA_PROG_ERROR;
@@ -284,20 +360,55 @@ coder_init(void)
const uint32_t flags = LZMA_TELL_UNSUPPORTED_CHECK
| LZMA_CONCATENATED;
+ // We abuse FORMAT_AUTO to indicate unknown file format,
+ // for which we may consider passthru mode.
+ enum format_type init_format = FORMAT_AUTO;
+
switch (opt_format) {
case FORMAT_AUTO:
- ret = lzma_auto_decoder(&strm,
- hardware_memlimit_decoder(), flags);
+ if (is_format_xz())
+ init_format = FORMAT_XZ;
+ else if (is_format_lzma())
+ init_format = FORMAT_LZMA;
+ break;
+
+ case FORMAT_XZ:
+ if (is_format_xz())
+ init_format = FORMAT_XZ;
+ break;
+
+ case FORMAT_LZMA:
+ if (is_format_lzma())
+ init_format = FORMAT_LZMA;
+ break;
+
+ case FORMAT_RAW:
+ init_format = FORMAT_RAW;
+ break;
+ }
+
+ switch (init_format) {
+ case FORMAT_AUTO:
+ // Uknown file format. If --decompress --stdout
+ // --force have been given, then we copy the input
+ // as is to stdout. Checking for MODE_DECOMPRESS
+ // is needed, because we don't want to do use
+ // passthru mode with --test.
+ if (opt_mode == MODE_DECOMPRESS
+ && opt_stdout && opt_force)
+ return CODER_INIT_PASSTHRU;
+
+ ret = LZMA_FORMAT_ERROR;
break;
case FORMAT_XZ:
ret = lzma_stream_decoder(&strm,
- hardware_memlimit_decoder(), flags);
+ hardware_memlimit_get(), flags);
break;
case FORMAT_LZMA:
ret = lzma_alone_decoder(&strm,
- hardware_memlimit_decoder());
+ hardware_memlimit_get());
break;
case FORMAT_RAW:
@@ -309,34 +420,30 @@ coder_init(void)
}
if (ret != LZMA_OK) {
- if (ret == LZMA_MEM_ERROR)
- message_error("%s", message_strm(LZMA_MEM_ERROR));
- else
- message_bug();
-
- return true;
+ message_error("%s: %s", pair->src_name, message_strm(ret));
+ return CODER_INIT_ERROR;
}
- return false;
+ return CODER_INIT_NORMAL;
}
+/// Compress or decompress using liblzma.
static bool
-coder_run(file_pair *pair)
+coder_normal(file_pair *pair)
{
- // Buffers to hold input and output data.
- uint8_t in_buf[IO_BUFFER_SIZE];
- uint8_t out_buf[IO_BUFFER_SIZE];
+ // Encoder needs to know when we have given all the input to it.
+ // The decoders need to know it too when we are using
+ // LZMA_CONCATENATED. We need to check for src_eof here, because
+ // the first input chunk has been already read, and that may
+ // have been the only chunk we will read.
+ lzma_action action = pair->src_eof ? LZMA_FINISH : LZMA_RUN;
- // Initialize the progress indicator.
- const uint64_t in_size = pair->src_st.st_size <= (off_t)(0)
- ? 0 : (uint64_t)(pair->src_st.st_size);
- message_progress_start(pair->src_name, in_size);
-
- lzma_action action = LZMA_RUN;
lzma_ret ret;
- strm.avail_in = 0;
+ // Assume that something goes wrong.
+ bool success = false;
+
strm.next_out = out_buf;
strm.avail_out = IO_BUFFER_SIZE;
@@ -350,9 +457,6 @@ coder_run(file_pair *pair)
if (strm.avail_in == SIZE_MAX)
break;
- // Encoder needs to know when we have given all the
- // input to it. The decoders need to know it too when
- // we are using LZMA_CONCATENATED.
if (pair->src_eof)
action = LZMA_FINISH;
}
@@ -364,7 +468,7 @@ coder_run(file_pair *pair)
if (strm.avail_out == 0) {
if (opt_mode != MODE_TEST && io_write(pair, out_buf,
IO_BUFFER_SIZE - strm.avail_out))
- return false;
+ break;
strm.next_out = out_buf;
strm.avail_out = IO_BUFFER_SIZE;
@@ -377,18 +481,6 @@ coder_run(file_pair *pair)
&& ret != LZMA_UNSUPPORTED_CHECK;
if (stop) {
- // First print the final progress info.
- // This way the user sees more accurately
- // where the error occurred. Note that we
- // print this *before* the possible error
- // message.
- //
- // FIXME: What if something goes wrong
- // after this?
- message_progress_end(strm.total_in,
- strm.total_out,
- ret == LZMA_STREAM_END);
-
// Write the remaining bytes even if something
// went wrong, because that way the user gets
// as much data as possible, which can be good
@@ -397,21 +489,32 @@ coder_run(file_pair *pair)
if (opt_mode != MODE_TEST && io_write(pair,
out_buf, IO_BUFFER_SIZE
- strm.avail_out))
- return false;
+ break;
}
if (ret == LZMA_STREAM_END) {
// Check that there is no trailing garbage.
// This is needed for LZMA_Alone and raw
// streams.
- if (strm.avail_in == 0 && (pair->src_eof
- || io_read(pair, in_buf, 1)
- == 0)) {
- assert(pair->src_eof);
- return true;
+ if (strm.avail_in == 0 && !pair->src_eof) {
+ // Try reading one more byte.
+ // Hopefully we don't get any more
+ // input, and thus pair->src_eof
+ // becomes true.
+ strm.avail_in = io_read(
+ pair, in_buf, 1);
+ if (strm.avail_in == SIZE_MAX)
+ break;
+
+ assert(strm.avail_in == 0
+ || strm.avail_in == 1);
}
- // FIXME: What about io_read() failing?
+ if (strm.avail_in == 0) {
+ assert(pair->src_eof);
+ success = true;
+ break;
+ }
// We hadn't reached the end of the file.
ret = LZMA_DATA_ERROR;
@@ -437,8 +540,7 @@ coder_run(file_pair *pair)
// Figure out how much memory it would have
// actually needed.
uint64_t memusage = lzma_memusage(&strm);
- uint64_t memlimit
- = hardware_memlimit_decoder();
+ uint64_t memlimit = hardware_memlimit_get();
// Round the memory limit down and usage up.
// This way we don't display a ridiculous
@@ -448,41 +550,86 @@ coder_run(file_pair *pair)
/ (1024 * 1024);
memlimit /= 1024 * 1024;
- message_error(_("Limit was %'" PRIu64 " MiB, "
- "but %'" PRIu64 " MiB would "
+ message_error(_("Limit was %s MiB, "
+ "but %s MiB would "
"have been needed"),
- memlimit, memusage);
+ uint64_to_str(memlimit, 0),
+ uint64_to_str(memusage, 1));
}
if (stop)
- return false;
+ break;
}
- // Show progress information if --verbose was specified and
- // stderr is a terminal.
- message_progress_update(strm.total_in, strm.total_out);
+ // Show progress information under certain conditions.
+ message_progress_update();
}
- return false;
+ return success;
}
-extern void
-process_file(const char *filename)
+/// Copy from input file to output file without processing the data in any
+/// way. This is used only when trying to decompress unrecognized files
+/// with --decompress --stdout --force, so the output is always stdout.
+static bool
+coder_passthru(file_pair *pair)
{
- // First try initializing the coder. If it fails, it's useless to try
- // opening the file. Check also for user_abort just in case if we had
- // got a signal while initializing the coder.
- if (coder_init() || user_abort)
- return;
+ while (strm.avail_in != 0) {
+ if (user_abort)
+ return false;
+
+ if (io_write(pair, in_buf, strm.avail_in))
+ return false;
+
+ strm.total_in += strm.avail_in;
+ strm.total_out = strm.total_in;
+ message_progress_update();
+ strm.avail_in = io_read(pair, in_buf, IO_BUFFER_SIZE);
+ if (strm.avail_in == SIZE_MAX)
+ return false;
+ }
+
+ return true;
+}
+
+
+extern void
+coder_run(const char *filename)
+{
// Try to open the input and output files.
file_pair *pair = io_open(filename);
if (pair == NULL)
return;
- // Do the actual coding.
- const bool success = coder_run(pair);
+ // Initialize the progress indicator.
+ const uint64_t in_size = pair->src_st.st_size <= (off_t)(0)
+ ? 0 : (uint64_t)(pair->src_st.st_size);
+ message_progress_start(&strm, pair->src_name, in_size);
+
+ // Assume that something goes wrong.
+ bool success = false;
+
+ // Read the first chunk of input data. This is needed to detect
+ // the input file type (for now, only for decompression).
+ strm.next_in = in_buf;
+ strm.avail_in = io_read(pair, in_buf, IO_BUFFER_SIZE);
+
+ switch (coder_init(pair)) {
+ case CODER_INIT_NORMAL:
+ success = coder_normal(pair);
+ break;
+
+ case CODER_INIT_PASSTHRU:
+ success = coder_passthru(pair);
+ break;
+
+ case CODER_INIT_ERROR:
+ break;
+ }
+
+ message_progress_end(success);
// Close the file pair. It needs to know if coding was successful to
// know if the source or target file should be unlinked.
diff --git a/Build/source/utils/xz-4.999.8beta/src/xz/process.h b/Build/source/utils/xz-4.999.9beta/src/xz/coder.h
index 709f287da67..0d3af6ad449 100644
--- a/Build/source/utils/xz-4.999.8beta/src/xz/process.h
+++ b/Build/source/utils/xz-4.999.9beta/src/xz/coder.h
@@ -1,19 +1,12 @@
///////////////////////////////////////////////////////////////////////////////
//
-/// \file process.h
+/// \file coder.h
/// \brief Compresses or uncompresses a file
//
-// Copyright (C) 2007 Lasse Collin
+// Author: Lasse Collin
//
-// This program is free software; you can redistribute it and/or
-// modify it under the terms of the GNU Lesser General Public
-// License as published by the Free Software Foundation; either
-// version 2.1 of the License, or (at your option) any later version.
-//
-// This program is distributed in the hope that it will be useful,
-// but WITHOUT ANY WARRANTY; without even the implied warranty of
-// MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the GNU
-// Lesser General Public License for more details.
+// This file has been put into the public domain.
+// You can do whatever you want with this file.
//
///////////////////////////////////////////////////////////////////////////////
@@ -60,6 +53,5 @@ extern void coder_add_filter(lzma_vli id, void *options);
///
extern void coder_set_compression_settings(void);
-extern void process_init(void);
-
-extern void process_file(const char *filename);
+/// Compress or decompress the given file
+extern void coder_run(const char *filename);
diff --git a/Build/source/utils/xz-4.999.8beta/src/xz/io.c b/Build/source/utils/xz-4.999.9beta/src/xz/file_io.c
index b8b8d8d7394..4c52da56c59 100644
--- a/Build/source/utils/xz-4.999.8beta/src/xz/io.c
+++ b/Build/source/utils/xz-4.999.9beta/src/xz/file_io.c
@@ -1,19 +1,12 @@
///////////////////////////////////////////////////////////////////////////////
//
-/// \file io.c
+/// \file file_io.c
/// \brief File opening, unlinking, and closing
//
-// Copyright (C) 2007 Lasse Collin
+// Author: Lasse Collin
//
-// This program is free software; you can redistribute it and/or
-// modify it under the terms of the GNU Lesser General Public
-// License as published by the Free Software Foundation; either
-// version 2.1 of the License, or (at your option) any later version.
-//
-// This program is distributed in the hope that it will be useful,
-// but WITHOUT ANY WARRANTY; without even the implied warranty of
-// MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the GNU
-// Lesser General Public License for more details.
+// This file has been put into the public domain.
+// You can do whatever you want with this file.
//
///////////////////////////////////////////////////////////////////////////////
@@ -21,6 +14,10 @@
#include <fcntl.h>
+#ifdef DOSLIKE
+# include <io.h>
+#endif
+
#if defined(HAVE_FUTIMES) || defined(HAVE_FUTIMESAT) || defined(HAVE_UTIMES)
# include <sys/time.h>
#elif defined(HAVE_UTIME)
@@ -35,7 +32,7 @@
# define O_NOCTTY 0
#endif
-#ifndef _WIN32
+#ifndef DOSLIKE
# include "open_stdxxx.h"
static bool warn_fchown;
#endif
@@ -44,7 +41,7 @@ static bool warn_fchown;
extern void
io_init(void)
{
-#ifndef _WIN32
+#ifndef DOSLIKE
// Make sure that stdin, stdout, and and stderr are connected to
// a valid file descriptor. Exit immediatelly with exit code ERROR
// if we cannot make the file descriptors valid. Maybe we should
@@ -56,6 +53,13 @@ io_init(void)
warn_fchown = geteuid() == 0;
#endif
+#ifdef __DJGPP__
+ // Avoid doing useless things when statting files.
+ // This isn't important but doesn't hurt.
+ _djstat_flags = _STAT_INODE | _STAT_EXEC_EXT
+ | _STAT_EXEC_MAGIC | _STAT_DIRSIZE;
+#endif
+
return;
}
@@ -69,8 +73,11 @@ io_init(void)
static void
io_unlink(const char *name, const struct stat *known_st)
{
+#ifdef DOSLIKE
// On Windows, st_ino is meaningless, so don't bother testing it.
-#ifndef _WIN32
+ // Just silence a compiler warning.
+ (void)known_st;
+#else
struct stat new_st;
if (lstat(name, &new_st)
@@ -98,7 +105,7 @@ static void
io_copy_attrs(const file_pair *pair)
{
// Skip chown and chmod on Windows.
-#ifndef _WIN32
+#ifndef DOSLIKE
// This function is more tricky than you may think at first.
// Blindly copying permissions may permit users to access the
// destination file who didn't have permission to access the
@@ -233,7 +240,7 @@ io_open_src(file_pair *pair)
// There's nothing to open when reading from stdin.
if (pair->src_name == stdin_filename) {
pair->src_fd = STDIN_FILENO;
-#ifdef _WIN32
+#ifdef DOSLIKE
setmode(STDIN_FILENO, O_BINARY);
#endif
return false;
@@ -246,7 +253,7 @@ io_open_src(file_pair *pair)
// Flags for open()
int flags = O_RDONLY | O_BINARY | O_NOCTTY;
-#ifndef _WIN32
+#ifndef DOSLIKE
// If we accept only regular files, we need to be careful to avoid
// problems with special files like devices and FIFOs. O_NONBLOCK
// prevents blocking when opening such files. When we want to accept
@@ -259,7 +266,7 @@ io_open_src(file_pair *pair)
#if defined(O_NOFOLLOW)
if (reg_files_only)
flags |= O_NOFOLLOW;
-#elif !defined(_WIN32)
+#elif !defined(DOSLIKE)
// Some POSIX-like systems lack O_NOFOLLOW (it's not required
// by POSIX). Check for symlinks with a separate lstat() on
// these systems.
@@ -363,7 +370,7 @@ io_open_src(file_pair *pair)
return true;
}
-#ifndef _WIN32
+#ifndef DOSLIKE
// Drop O_NONBLOCK, which is used only when we are accepting only
// regular files. After the open() call, we want things to block
// instead of giving EAGAIN.
@@ -398,7 +405,7 @@ io_open_src(file_pair *pair)
}
// These are meaningless on Windows.
-#ifndef _WIN32
+#ifndef DOSLIKE
if (pair->src_st.st_mode & (S_ISUID | S_ISGID)) {
// gzip rejects setuid and setgid files even
// when --force was used. bzip2 doesn't check
@@ -450,7 +457,7 @@ static void
io_close_src(file_pair *pair, bool success)
{
if (pair->src_fd != STDIN_FILENO && pair->src_fd != -1) {
-#ifdef _WIN32
+#ifdef DOSLIKE
(void)close(pair->src_fd);
#endif
@@ -459,12 +466,12 @@ io_close_src(file_pair *pair, bool success)
// happens to get same inode number, which would make us
// unlink() wrong file.
//
- // NOTE: Windows is an exception to this, because it doesn't
- // allow unlinking files that are open. *sigh*
+ // NOTE: DOS-like systems are an exception to this, because
+ // they don't allow unlinking files that are open. *sigh*
if (success && !opt_keep_original)
io_unlink(pair->src_name, &pair->src_st);
-#ifndef _WIN32
+#ifndef DOSLIKE
(void)close(pair->src_fd);
#endif
}
@@ -480,7 +487,7 @@ io_open_dest(file_pair *pair)
// We don't modify or free() this.
pair->dest_name = (char *)"(stdout)";
pair->dest_fd = STDOUT_FILENO;
-#ifdef _WIN32
+#ifdef DOSLIKE
setmode(STDOUT_FILENO, O_BINARY);
#endif
return false;
diff --git a/Build/source/utils/xz-4.999.8beta/src/xz/io.h b/Build/source/utils/xz-4.999.9beta/src/xz/file_io.h
index 87cfdac2131..b0bbe11a834 100644
--- a/Build/source/utils/xz-4.999.8beta/src/xz/io.h
+++ b/Build/source/utils/xz-4.999.9beta/src/xz/file_io.h
@@ -1,19 +1,12 @@
///////////////////////////////////////////////////////////////////////////////
//
-/// \file io.h
+/// \file file_io.h
/// \brief I/O types and functions
//
-// Copyright (C) 2007 Lasse Collin
+// Author: Lasse Collin
//
-// This program is free software; you can redistribute it and/or
-// modify it under the terms of the GNU Lesser General Public
-// License as published by the Free Software Foundation; either
-// version 2.1 of the License, or (at your option) any later version.
-//
-// This program is distributed in the hope that it will be useful,
-// but WITHOUT ANY WARRANTY; without even the implied warranty of
-// MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the GNU
-// Lesser General Public License for more details.
+// This file has been put into the public domain.
+// You can do whatever you want with this file.
//
///////////////////////////////////////////////////////////////////////////////
diff --git a/Build/source/utils/xz-4.999.9beta/src/xz/hardware.c b/Build/source/utils/xz-4.999.9beta/src/xz/hardware.c
new file mode 100644
index 00000000000..72dc2cb10ca
--- /dev/null
+++ b/Build/source/utils/xz-4.999.9beta/src/xz/hardware.c
@@ -0,0 +1,95 @@
+///////////////////////////////////////////////////////////////////////////////
+//
+/// \file hardware.c
+/// \brief Detection of available hardware resources
+//
+// Author: Lasse Collin
+//
+// This file has been put into the public domain.
+// You can do whatever you want with this file.
+//
+///////////////////////////////////////////////////////////////////////////////
+
+#include "private.h"
+#include "physmem.h"
+#include "cpucores.h"
+
+
+/// Maximum number of free *coder* threads. This can be set with
+/// the --threads=NUM command line option.
+static uint32_t threadlimit;
+
+/// Memory usage limit
+static uint64_t memlimit;
+
+
+extern void
+hardware_threadlimit_set(uint32_t new_threadlimit)
+{
+ if (new_threadlimit == 0) {
+ // The default is the number of available CPU cores.
+ threadlimit = cpucores();
+ if (threadlimit == 0)
+ threadlimit = 1;
+ } else {
+ threadlimit = new_threadlimit;
+ }
+
+ return;
+}
+
+
+extern uint32_t
+hardware_threadlimit_get(void)
+{
+ return threadlimit;
+}
+
+
+extern void
+hardware_memlimit_set(uint64_t new_memlimit)
+{
+ if (new_memlimit == 0) {
+ // The default is 40 % of total installed physical RAM.
+ hardware_memlimit_set_percentage(40);
+ } else {
+ memlimit = new_memlimit;
+ }
+
+ return;
+}
+
+
+extern void
+hardware_memlimit_set_percentage(uint32_t percentage)
+{
+ assert(percentage > 0);
+ assert(percentage <= 100);
+
+ uint64_t mem = physmem();
+
+ // If we cannot determine the amount of RAM, assume 32 MiB. Maybe
+ // even that is too much on some systems. But on most systems it's
+ // far too little, and can be annoying.
+ if (mem == 0)
+ mem = UINT64_C(32) * 1024 * 1024;
+
+ memlimit = percentage * mem / 100;
+ return;
+}
+
+
+extern uint64_t
+hardware_memlimit_get(void)
+{
+ return memlimit;
+}
+
+
+extern void
+hardware_init(void)
+{
+ hardware_memlimit_set(0);
+ hardware_threadlimit_set(0);
+ return;
+}
diff --git a/Build/source/utils/xz-4.999.9beta/src/xz/hardware.h b/Build/source/utils/xz-4.999.9beta/src/xz/hardware.h
new file mode 100644
index 00000000000..b2cf34cbc8c
--- /dev/null
+++ b/Build/source/utils/xz-4.999.9beta/src/xz/hardware.h
@@ -0,0 +1,35 @@
+///////////////////////////////////////////////////////////////////////////////
+//
+/// \file hardware.h
+/// \brief Detection of available hardware resources
+//
+// Author: Lasse Collin
+//
+// This file has been put into the public domain.
+// You can do whatever you want with this file.
+//
+///////////////////////////////////////////////////////////////////////////////
+
+/// Initialize some hardware-specific variables, which are needed by other
+/// hardware_* functions.
+extern void hardware_init(void);
+
+
+/// Set custom value for maximum number of coder threads.
+extern void hardware_threadlimit_set(uint32_t threadlimit);
+
+/// Get the maximum number of coder threads. Some additional helper threads
+/// are allowed on top of this).
+extern uint32_t hardware_threadlimit_get(void);
+
+
+/// Set custom memory usage limit. This is used for both encoding and
+/// decoding. Zero indicates resetting the limit back to defaults.
+extern void hardware_memlimit_set(uint64_t memlimit);
+
+/// Set custom memory usage limit as a percentage of installed RAM.
+/// The percentage must be in the range [1, 100].
+extern void hardware_memlimit_set_percentage(uint32_t percentage);
+
+/// Get the current memory usage limit.
+extern uint64_t hardware_memlimit_get(void);
diff --git a/Build/source/utils/xz-4.999.8beta/src/xz/main.c b/Build/source/utils/xz-4.999.9beta/src/xz/main.c
index b683cf9b9d2..4121f8d48bc 100644
--- a/Build/source/utils/xz-4.999.8beta/src/xz/main.c
+++ b/Build/source/utils/xz-4.999.9beta/src/xz/main.c
@@ -3,17 +3,10 @@
/// \file main.c
/// \brief main()
//
-// Copyright (C) 2007 Lasse Collin
+// Author: Lasse Collin
//
-// This program is free software; you can redistribute it and/or
-// modify it under the terms of the GNU Lesser General Public
-// License as published by the Free Software Foundation; either
-// version 2.1 of the License, or (at your option) any later version.
-//
-// This program is distributed in the hope that it will be useful,
-// but WITHOUT ANY WARRANTY; without even the implied warranty of
-// MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the GNU
-// Lesser General Public License for more details.
+// This file has been put into the public domain.
+// You can do whatever you want with this file.
//
///////////////////////////////////////////////////////////////////////////////
@@ -24,6 +17,10 @@
/// Exit status to use. This can be changed with set_exit_status().
static enum exit_status_type exit_status = E_SUCCESS;
+/// True if --no-warn is specified. When this is true, we don't set
+/// the exit status to E_WARNING when something worth a warning happens.
+static bool no_warn = false;
+
extern void
set_exit_status(enum exit_status_type new_status)
@@ -38,6 +35,14 @@ set_exit_status(enum exit_status_type new_status)
extern void
+set_exit_no_warn(void)
+{
+ no_warn = true;
+ return;
+}
+
+
+extern void
my_exit(enum exit_status_type status)
{
// Close stdout. If something goes wrong, print an error message
@@ -49,8 +54,8 @@ my_exit(enum exit_status_type status)
// If it was fclose() that failed, we have the reason
// in errno. If only ferror() indicated an error,
// we have no idea what the reason was.
- message(V_ERROR, _("Writing to standard output "
- "failed: %s"),
+ message(V_ERROR, "%s: %s", _("Writing to standard "
+ "output failed"),
fclose_err ? strerror(errno)
: _("Unknown error"));
status = E_ERROR;
@@ -66,6 +71,11 @@ my_exit(enum exit_status_type status)
status = E_ERROR;
}
+ // Suppress the exit status indicating a warning if --no-warn
+ // was specified.
+ if (status == E_WARNING && no_warn)
+ status = E_SUCCESS;
+
// If we have got a signal, raise it to kill the program.
// Otherwise we just call exit().
signals_exit();
@@ -164,6 +174,29 @@ main(int argc, char **argv)
// that stdin, stdout, and stderr are something valid.
io_init();
+#ifdef DOSLIKE
+ // Adjust argv[0] to make it look nicer in messages, and also to
+ // help the code in args.c.
+ {
+ // Strip the leading path.
+ char *p = argv[0] + strlen(argv[0]);
+ while (argv[0] < p && p[-1] != '/' && p[-1] != '\\')
+ --p;
+
+ argv[0] = p;
+
+ // Strip the .exe suffix.
+ p = strrchr(p, '.');
+ if (p != NULL)
+ *p = '\0';
+
+ // Make it lowercase.
+ for (p = argv[0]; *p != '\0'; ++p)
+ if (*p >= 'A' && *p <= 'Z')
+ *p = *p - 'A' + 'a';
+ }
+#endif
+
// Set up the locale.
setlocale(LC_ALL, "");
@@ -197,7 +230,7 @@ main(int argc, char **argv)
// Refuse to write compressed data to standard output if it is
// a terminal and --force wasn't used.
- if (opt_mode == MODE_COMPRESS) {
+ if (opt_mode == MODE_COMPRESS && !opt_force) {
if (opt_stdout || (args.arg_count == 1
&& strcmp(args.arg_names[0], "-") == 0)) {
if (is_tty_stdout()) {
@@ -244,7 +277,7 @@ main(int argc, char **argv)
}
// Replace the "-" with a special pointer, which is
- // recognized by process_file() and other things.
+ // recognized by coder_run() and other things.
// This way error messages get a proper filename
// string and the code still knows that it is
// handling the special case of stdin.
@@ -252,7 +285,7 @@ main(int argc, char **argv)
}
// Do the actual compression or uncompression.
- process_file(args.arg_names[i]);
+ coder_run(args.arg_names[i]);
}
// If --files or --files0 was used, process the filenames from the
@@ -268,7 +301,7 @@ main(int argc, char **argv)
// read_name() doesn't return empty names.
assert(name[0] != '\0');
- process_file(name);
+ coder_run(name);
}
if (args.files_name != stdin_filename)
diff --git a/Build/source/utils/xz-4.999.8beta/src/xz/main.h b/Build/source/utils/xz-4.999.9beta/src/xz/main.h
index 2d6419ad3d1..8fd923930f9 100644
--- a/Build/source/utils/xz-4.999.8beta/src/xz/main.h
+++ b/Build/source/utils/xz-4.999.9beta/src/xz/main.h
@@ -3,17 +3,10 @@
/// \file main.h
/// \brief Miscellanous declarations
//
-// Copyright (C) 2008 Lasse Collin
+// Author: Lasse Collin
//
-// This program is free software; you can redistribute it and/or
-// modify it under the terms of the GNU Lesser General Public
-// License as published by the Free Software Foundation; either
-// version 2.1 of the License, or (at your option) any later version.
-//
-// This program is distributed in the hope that it will be useful,
-// but WITHOUT ANY WARRANTY; without even the implied warranty of
-// MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the GNU
-// Lesser General Public License for more details.
+// This file has been put into the public domain.
+// You can do whatever you want with this file.
//
///////////////////////////////////////////////////////////////////////////////
@@ -26,11 +19,17 @@ enum exit_status_type {
/// Sets the exit status after a warning or error has occurred. If new_status
-/// is EX_WARNING and the old exit status was already EX_ERROR, the exit
+/// is E_WARNING and the old exit status was already E_ERROR, the exit
/// status is not changed.
extern void set_exit_status(enum exit_status_type new_status);
+/// Use E_SUCCESS instead of E_WARNING if something worth a warning occurs
+/// but nothing worth an error has occurred. This is called when --no-warn
+/// is specified.
+extern void set_exit_no_warn(void);
+
+
/// Exits the program using the given status. This takes care of closing
/// stdin, stdout, and stderr and catches possible errors. If we had got
/// a signal, this function will raise it so that to the parent process it
diff --git a/Build/source/utils/xz-4.999.8beta/src/xz/message.c b/Build/source/utils/xz-4.999.9beta/src/xz/message.c
index e342a3ff4a5..19aff9bdb41 100644
--- a/Build/source/utils/xz-4.999.8beta/src/xz/message.c
+++ b/Build/source/utils/xz-4.999.9beta/src/xz/message.c
@@ -3,17 +3,10 @@
/// \file message.c
/// \brief Printing messages to stderr
//
-// Copyright (C) 2007-2008 Lasse Collin
+// Author: Lasse Collin
//
-// This program is free software; you can redistribute it and/or
-// modify it under the terms of the GNU Lesser General Public
-// License as published by the Free Software Foundation; either
-// version 2.1 of the License, or (at your option) any later version.
-//
-// This program is distributed in the hope that it will be useful,
-// but WITHOUT ANY WARRANTY; without even the implied warranty of
-// MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the GNU
-// Lesser General Public License for more details.
+// This file has been put into the public domain.
+// You can do whatever you want with this file.
//
///////////////////////////////////////////////////////////////////////////////
@@ -23,13 +16,6 @@
# include <sys/time.h>
#endif
-#ifdef _WIN32
-# ifndef _WIN32_WINNT
-# define _WIN32_WINNT 0x0500
-# endif
-# include <windows.h>
-#endif
-
#include <stdarg.h>
@@ -51,100 +37,80 @@ static const char *filename;
/// True once the a filename has been printed to stderr as part of progress
/// message. If automatic progress updating isn't enabled, this becomes true
/// after the first progress message has been printed due to user sending
-/// SIGALRM. Once this variable is true, we will print an empty line before
-/// the next filename to make the output more readable.
+/// SIGINFO, SIGUSR1, or SIGALRM. Once this variable is true, we will print
+/// an empty line before the next filename to make the output more readable.
static bool first_filename_printed = false;
/// This is set to true when we have printed the current filename to stderr
/// as part of a progress message. This variable is useful only if not
-/// updating progress automatically: if user sends many SIGALRM signals,
-/// we won't print the name of the same file multiple times.
+/// updating progress automatically: if user sends many SIGINFO, SIGUSR1, or
+/// SIGALRM signals, we won't print the name of the same file multiple times.
static bool current_filename_printed = false;
-/// True if we should print progress indicator and update it automatically.
+/// True if we should print progress indicator and update it automatically
+/// if also verbose >= V_VERBOSE.
static bool progress_automatic;
+/// True if message_progress_start() has been called but
+/// message_progress_end() hasn't been called yet.
+static bool progress_started = false;
+
/// This is true when a progress message was printed and the cursor is still
/// on the same line with the progress message. In that case, a newline has
/// to be printed before any error messages.
static bool progress_active = false;
+/// Pointer to lzma_stream used to do the encoding or decoding.
+static lzma_stream *progress_strm;
+
/// Expected size of the input stream is needed to show completion percentage
/// and estimate remaining time.
static uint64_t expected_in_size;
/// Time when we started processing the file
-static double start_time;
+static uint64_t start_time;
+
+
+// Use alarm() and SIGALRM when they are supported. This has two minor
+// advantages over the alternative of polling gettimeofday():
+// - It is possible for the user to send SIGINFO, SIGUSR1, or SIGALRM to
+// get intermediate progress information even when --verbose wasn't used
+// or stderr is not a terminal.
+// - alarm() + SIGALRM seems to have slightly less overhead than polling
+// gettimeofday().
+#ifdef SIGALRM
/// The signal handler for SIGALRM sets this to true. It is set back to false
/// once the progress message has been updated.
static volatile sig_atomic_t progress_needs_updating = false;
-
-#ifdef _WIN32
-
-static HANDLE timer_queue = NULL;
-static HANDLE timer_timer = NULL;
-
-
-static void CALLBACK
-timer_callback(PVOID dummy1 lzma_attribute((unused)),
- BOOLEAN dummy2 lzma_attribute((unused)))
-{
- progress_needs_updating = true;
- return;
-}
-
-
-/// Emulate alarm() on Windows.
+/// Signal handler for SIGALRM
static void
-my_alarm(unsigned int seconds)
+progress_signal_handler(int sig lzma_attribute((unused)))
{
- // Just in case creating the queue has failed.
- if (timer_queue == NULL)
- return;
-
- // If an old timer_timer exists, get rid of it first.
- if (timer_timer != NULL) {
- (void)DeleteTimerQueueTimer(timer_queue, timer_timer, NULL);
- timer_timer = NULL;
- }
-
- // If it fails, tough luck. It's not that important.
- (void)CreateTimerQueueTimer(&timer_timer, timer_queue, &timer_callback,
- NULL, 1000U * seconds, 0,
- WT_EXECUTEINTIMERTHREAD | WT_EXECUTEONLYONCE);
-
+ progress_needs_updating = true;
return;
}
#else
-#define my_alarm alarm
+/// This is true when progress message printing is wanted. Using the same
+/// variable name as above to avoid some ifdefs.
+static bool progress_needs_updating = false;
-/// Signal handler for SIGALRM
-static void
-progress_signal_handler(int sig lzma_attribute((unused)))
-{
- progress_needs_updating = true;
- return;
-}
+/// Elapsed time when the next progress message update should be done.
+static uint64_t progress_next_update;
#endif
-/// Get the current time as double
-static double
+
+/// Get the current time as microseconds since epoch
+static uint64_t
my_time(void)
{
struct timeval tv;
-
- // This really shouldn't fail. I'm not sure what to return if it
- // still fails. It doesn't look so useful to check the return value
- // everywhere. FIXME?
- if (gettimeofday(&tv, NULL))
- return -1.0;
-
- return (double)(tv.tv_sec) + (double)(tv.tv_usec) / 1.0e9;
+ gettimeofday(&tv, NULL);
+ return (uint64_t)(tv.tv_sec) * UINT64_C(1000000) + tv.tv_usec;
}
@@ -204,17 +170,36 @@ message_init(const char *given_argv0)
}
*/
-#ifdef _WIN32
- timer_queue = CreateTimerQueue();
-#else
- // Establish the signal handler for SIGALRM. Since this signal
- // doesn't require any quick action, we set SA_RESTART.
+#ifdef SIGALRM
+ // At least DJGPP lacks SA_RESTART. It's not essential for us (the
+ // rest of the code can handle interrupted system calls), so just
+ // define it zero.
+# ifndef SA_RESTART
+# define SA_RESTART 0
+# endif
+ // Establish the signal handlers which set a flag to tell us that
+ // progress info should be updated. Since these signals don't
+ // require any quick action, we set SA_RESTART.
+ static const int sigs[] = {
+#ifdef SIGALRM
+ SIGALRM,
+#endif
+#ifdef SIGINFO
+ SIGINFO,
+#endif
+#ifdef SIGUSR1
+ SIGUSR1,
+#endif
+ };
+
struct sigaction sa;
sigemptyset(&sa.sa_mask);
sa.sa_flags = SA_RESTART;
sa.sa_handler = &progress_signal_handler;
- if (sigaction(SIGALRM, &sa, NULL))
- message_signal_handler();
+
+ for (size_t i = 0; i < ARRAY_SIZE(sigs); ++i)
+ if (sigaction(sigs[i], &sa, NULL))
+ message_signal_handler();
#endif
return;
@@ -285,16 +270,25 @@ print_filename(void)
extern void
-message_progress_start(const char *src_name, uint64_t in_size)
+message_progress_start(
+ lzma_stream *strm, const char *src_name, uint64_t in_size)
{
+ // Store the pointer to the lzma_stream used to do the coding.
+ // It is needed to find out the position in the stream.
+ progress_strm = strm;
+
// Store the processing start time of the file and its expected size.
// If we aren't printing any statistics, then these are unused. But
- // since it is possible that the user tells us with SIGALRM to show
+ // since it is possible that the user sends us a signal to show
// statistics, we need to have these available anyway.
start_time = my_time();
filename = src_name;
expected_in_size = in_size;
+ // Indicate that progress info may need to be printed before
+ // printing error messages.
+ progress_started = true;
+
// Indicate the name of this file hasn't been printed to
// stderr yet.
current_filename_printed = false;
@@ -303,19 +297,26 @@ message_progress_start(const char *src_name, uint64_t in_size)
++files_pos;
// If progress indicator is wanted, print the filename and possibly
- // the file count now. As an exception, if there is exactly one file,
- // do not print the filename at all.
+ // the file count now.
if (verbosity >= V_VERBOSE && progress_automatic) {
// Print the filename to stderr if that is appropriate with
// the current settings.
print_filename();
- // Start the timer to set progress_needs_updating to true
- // after about one second. An alternative would to be set
- // progress_needs_updating to true here immediatelly, but
- // setting the timer looks better to me, since extremely
- // early progress info is pretty much useless.
- my_alarm(1);
+ // Start the timer to display the first progress message
+ // after one second. An alternative would be to show the
+ // first message almost immediatelly, but delaying by one
+ // second looks better to me, since extremely early
+ // progress info is pretty much useless.
+#ifdef SIGALRM
+ // First disable a possibly existing alarm.
+ alarm(0);
+ progress_needs_updating = false;
+ alarm(1);
+#else
+ progress_needs_updating = true;
+ progress_next_update = 1000000;
+#endif
}
return;
@@ -324,21 +325,31 @@ message_progress_start(const char *src_name, uint64_t in_size)
/// Make the string indicating completion percentage.
static const char *
-progress_percentage(uint64_t in_pos)
+progress_percentage(uint64_t in_pos, bool final)
{
- // If the size of the input file is unknown or the size told us is
- // clearly wrong since we have processed more data than the alleged
- // size of the file, show a static string indicating that we have
- // no idea of the completion percentage.
- if (expected_in_size == 0 || in_pos > expected_in_size)
- return "--- %";
+ static char buf[sizeof("100.0 %")];
+
+ double percentage;
- static char buf[sizeof("99.9 %")];
+ if (final) {
+ // Use floating point conversion of snprintf() also for
+ // 100.0 % instead of fixed string, because the decimal
+ // separator isn't a dot in all locales.
+ percentage = 100.0;
+ } else {
+ // If the size of the input file is unknown or the size told us is
+ // clearly wrong since we have processed more data than the alleged
+ // size of the file, show a static string indicating that we have
+ // no idea of the completion percentage.
+ if (expected_in_size == 0 || in_pos > expected_in_size)
+ return "--- %";
+
+ // Never show 100.0 % before we actually are finished.
+ percentage = (double)(in_pos) / (double)(expected_in_size)
+ * 99.9;
+ }
- // Never show 100.0 % before we actually are finished (that case is
- // handled separately in message_progress_end()).
- snprintf(buf, sizeof(buf), "%.1f %%",
- (double)(in_pos) / (double)(expected_in_size) * 99.9);
+ snprintf(buf, sizeof(buf), "%.1f %%", percentage);
return buf;
}
@@ -347,24 +358,28 @@ progress_percentage(uint64_t in_pos)
static void
progress_sizes_helper(char **pos, size_t *left, uint64_t value, bool final)
{
+ // Allow high precision only for the final message, since it looks
+ // stupid for in-progress information.
if (final) {
// At maximum of four digits is allowed for exact byte count.
if (value < 10000) {
- my_snprintf(pos, left, "%'" PRIu64 " B", value);
+ my_snprintf(pos, left, "%s B",
+ uint64_to_str(value, 0));
return;
}
// At maximum of five significant digits is allowed for KiB.
if (value < UINT64_C(10239900)) {
- my_snprintf(pos, left, "%'.1f KiB",
- (double)(value) / 1024.0);
+ my_snprintf(pos, left, "%s KiB", double_to_str(
+ (double)(value) / 1024.0));
return;
}
}
// Otherwise we use MiB.
- my_snprintf(pos, left, "%'.1f MiB",
- (double)(value) / (1024.0 * 1024.0));
+ my_snprintf(pos, left, "%s MiB",
+ double_to_str((double)(value) / (1024.0 * 1024.0)));
+
return;
}
@@ -409,11 +424,11 @@ progress_sizes(uint64_t compressed_pos, uint64_t uncompressed_pos, bool final)
/// Make the string containing the processing speed of uncompressed data.
static const char *
-progress_speed(uint64_t uncompressed_pos, double elapsed)
+progress_speed(uint64_t uncompressed_pos, uint64_t elapsed)
{
// Don't print the speed immediatelly, since the early values look
// like somewhat random.
- if (elapsed < 3.0)
+ if (elapsed < 3000000)
return "";
static const char unit[][8] = {
@@ -425,17 +440,24 @@ progress_speed(uint64_t uncompressed_pos, double elapsed)
size_t unit_index = 0;
// Calculate the speed as KiB/s.
- double speed = (double)(uncompressed_pos) / (elapsed * 1024.0);
+ double speed = (double)(uncompressed_pos)
+ / ((double)(elapsed) * (1024.0 / 1e6));
// Adjust the unit of the speed if needed.
- while (speed > 999.9) {
+ while (speed > 999.0) {
speed /= 1024.0;
if (++unit_index == ARRAY_SIZE(unit))
return ""; // Way too fast ;-)
}
- static char buf[sizeof("999.9 GiB/s")];
- snprintf(buf, sizeof(buf), "%.1f %s", speed, unit[unit_index]);
+ // Use decimal point only if the number is small. Examples:
+ // - 0.1 KiB/s
+ // - 9.9 KiB/s
+ // - 99 KiB/s
+ // - 999 KiB/s
+ static char buf[sizeof("999 GiB/s")];
+ snprintf(buf, sizeof(buf), "%.*f %s",
+ speed > 9.9 ? 0 : 1, speed, unit[unit_index]);
return buf;
}
@@ -443,13 +465,15 @@ progress_speed(uint64_t uncompressed_pos, double elapsed)
/// Make a string indicating elapsed or remaining time. The format is either
/// M:SS or H:MM:SS depending on if the time is an hour or more.
static const char *
-progress_time(uint32_t seconds)
+progress_time(uint64_t useconds)
{
// 9999 hours = 416 days
static char buf[sizeof("9999:59:59")];
+ uint32_t seconds = useconds / 1000000;
+
// Don't show anything if the time is zero or ridiculously big.
- if (seconds == 0 || seconds > ((UINT32_C(9999) * 60) + 59) * 60 + 59)
+ if (seconds == 0 || seconds > ((9999 * 60) + 59) * 60 + 59)
return "";
uint32_t minutes = seconds / 60;
@@ -473,87 +497,187 @@ progress_time(uint32_t seconds)
/// Make the string to contain the estimated remaining time, or if the amount
/// of input isn't known, how much time has elapsed.
static const char *
-progress_remaining(uint64_t in_pos, double elapsed)
+progress_remaining(uint64_t in_pos, uint64_t elapsed)
{
- // If we don't know the size of the input, we indicate the time
- // spent so far.
- if (expected_in_size == 0 || in_pos > expected_in_size)
- return progress_time((uint32_t)(elapsed));
-
- // If we are at the very beginning of the file or the file is very
- // small, don't give any estimate to avoid far too wrong estimations.
- if (in_pos < (UINT64_C(1) << 19) || elapsed < 8.0)
- return "";
+ // Show the amount of time spent so far when making an estimate of
+ // remaining time wouldn't be reasonable:
+ // - Input size is unknown.
+ // - Input has grown bigger since we started (de)compressing.
+ // - We haven't processed much data yet, so estimate would be
+ // too inaccurate.
+ // - Only a few seconds has passed since we started (de)compressing,
+ // so estimate would be too inaccurate.
+ if (expected_in_size == 0 || in_pos > expected_in_size
+ || in_pos < (UINT64_C(1) << 19) || elapsed < 8000000)
+ return progress_time(elapsed);
// Calculate the estimate. Don't give an estimate of zero seconds,
// since it is possible that all the input has been already passed
// to the library, but there is still quite a bit of output pending.
uint32_t remaining = (double)(expected_in_size - in_pos)
- * elapsed / (double)(in_pos);
- if (remaining == 0)
+ * ((double)(elapsed) / 1e6) / (double)(in_pos);
+ if (remaining < 1)
remaining = 1;
- return progress_time(remaining);
+ static char buf[sizeof("9 h 55 min")];
+
+ // Select appropriate precision for the estimated remaining time.
+ if (remaining <= 10) {
+ // At maximum of 10 seconds remaining.
+ // Show the number of seconds as is.
+ snprintf(buf, sizeof(buf), "%" PRIu32 " s", remaining);
+
+ } else if (remaining <= 50) {
+ // At maximum of 50 seconds remaining.
+ // Round up to the next multiple of five seconds.
+ remaining = (remaining + 4) / 5 * 5;
+ snprintf(buf, sizeof(buf), "%" PRIu32 " s", remaining);
+
+ } else if (remaining <= 590) {
+ // At maximum of 9 minutes and 50 seconds remaining.
+ // Round up to the next multiple of ten seconds.
+ remaining = (remaining + 9) / 10 * 10;
+ snprintf(buf, sizeof(buf), "%" PRIu32 " min %" PRIu32 " s",
+ remaining / 60, remaining % 60);
+
+ } else if (remaining <= 59 * 60) {
+ // At maximum of 59 minutes remaining.
+ // Round up to the next multiple of a minute.
+ remaining = (remaining + 59) / 60;
+ snprintf(buf, sizeof(buf), "%" PRIu32 " min", remaining);
+
+ } else if (remaining <= 9 * 3600 + 50 * 60) {
+ // At maximum of 9 hours and 50 minutes left.
+ // Round up to the next multiple of ten minutes.
+ remaining = (remaining + 599) / 600 * 10;
+ snprintf(buf, sizeof(buf), "%" PRIu32 " h %" PRIu32 " min",
+ remaining / 60, remaining % 60);
+
+ } else if (remaining <= 23 * 3600) {
+ // At maximum of 23 hours remaining.
+ // Round up to the next multiple of an hour.
+ remaining = (remaining + 3599) / 3600;
+ snprintf(buf, sizeof(buf), "%" PRIu32 " h", remaining);
+
+ } else if (remaining <= 9 * 24 * 3600 + 23 * 3600) {
+ // At maximum of 9 days and 23 hours remaining.
+ // Round up to the next multiple of an hour.
+ remaining = (remaining + 3599) / 3600;
+ snprintf(buf, sizeof(buf), "%" PRIu32 " d %" PRIu32 " h",
+ remaining / 24, remaining % 24);
+
+ } else if (remaining <= 999 * 24 * 3600) {
+ // At maximum of 999 days remaining. ;-)
+ // Round up to the next multiple of a day.
+ remaining = (remaining + 24 * 3600 - 1) / (24 * 3600);
+ snprintf(buf, sizeof(buf), "%" PRIu32 " d", remaining);
+
+ } else {
+ // The estimated remaining time is so big that it's better
+ // that we just show the elapsed time.
+ return progress_time(elapsed);
+ }
+
+ return buf;
+}
+
+
+/// Calculate the elapsed time as microseconds.
+static uint64_t
+progress_elapsed(void)
+{
+ return my_time() - start_time;
+}
+
+
+/// Get information about position in the stream. This is currently simple,
+/// but it will become more complicated once we have multithreading support.
+static void
+progress_pos(uint64_t *in_pos,
+ uint64_t *compressed_pos, uint64_t *uncompressed_pos)
+{
+ *in_pos = progress_strm->total_in;
+
+ if (opt_mode == MODE_COMPRESS) {
+ *compressed_pos = progress_strm->total_out;
+ *uncompressed_pos = progress_strm->total_in;
+ } else {
+ *compressed_pos = progress_strm->total_in;
+ *uncompressed_pos = progress_strm->total_out;
+ }
+
+ return;
}
extern void
-message_progress_update(uint64_t in_pos, uint64_t out_pos)
+message_progress_update(void)
{
- // If there's nothing to do, return immediatelly.
- if (!progress_needs_updating || in_pos == 0)
+ if (!progress_needs_updating)
return;
- // Print the filename if it hasn't been printed yet.
- print_filename();
-
// Calculate how long we have been processing this file.
- const double elapsed = my_time() - start_time;
+ const uint64_t elapsed = progress_elapsed();
+
+#ifndef SIGALRM
+ if (progress_next_update > elapsed)
+ return;
+
+ progress_next_update = elapsed + 1000000;
+#endif
- // Set compressed_pos and uncompressed_pos.
+ // Get our current position in the stream.
+ uint64_t in_pos;
uint64_t compressed_pos;
uint64_t uncompressed_pos;
- if (opt_mode == MODE_COMPRESS) {
- compressed_pos = out_pos;
- uncompressed_pos = in_pos;
- } else {
- compressed_pos = in_pos;
- uncompressed_pos = out_pos;
- }
+ progress_pos(&in_pos, &compressed_pos, &uncompressed_pos);
+ // Block signals so that fprintf() doesn't get interrupted.
signals_block();
+ // Print the filename if it hasn't been printed yet.
+ print_filename();
+
// Print the actual progress message. The idea is that there is at
// least three spaces between the fields in typical situations, but
// even in rare situations there is at least one space.
- fprintf(stderr, " %7s %43s %11s %10s\r",
- progress_percentage(in_pos),
+ fprintf(stderr, " %7s %43s %9s %10s\r",
+ progress_percentage(in_pos, false),
progress_sizes(compressed_pos, uncompressed_pos, false),
progress_speed(uncompressed_pos, elapsed),
progress_remaining(in_pos, elapsed));
+#ifdef SIGALRM
// Updating the progress info was finished. Reset
// progress_needs_updating to wait for the next SIGALRM.
//
- // NOTE: This has to be done before my_alarm() call or with (very) bad
+ // NOTE: This has to be done before alarm(1) or with (very) bad
// luck we could be setting this to false after the alarm has already
// been triggered.
progress_needs_updating = false;
- if (progress_automatic) {
+ if (verbosity >= V_VERBOSE && progress_automatic) {
// Mark that the progress indicator is active, so if an error
// occurs, the error message gets printed cleanly.
progress_active = true;
// Restart the timer so that progress_needs_updating gets
// set to true after about one second.
- my_alarm(1);
+ alarm(1);
} else {
// The progress message was printed because user had sent us
// SIGALRM. In this case, each progress message is printed
// on its own line.
fputc('\n', stderr);
}
+#else
+ // When SIGALRM isn't supported and we get here, it's always due to
+ // automatic progress update. We set progress_active here too like
+ // described above.
+ assert(verbosity >= V_VERBOSE);
+ assert(progress_automatic);
+ progress_active = true;
+#endif
signals_unblock();
@@ -561,57 +685,58 @@ message_progress_update(uint64_t in_pos, uint64_t out_pos)
}
-extern void
-message_progress_end(uint64_t in_pos, uint64_t out_pos, bool success)
+static void
+progress_flush(bool finished)
{
- // If we are not in verbose mode, we have nothing to do.
- if (verbosity < V_VERBOSE || user_abort)
+ if (!progress_started || verbosity < V_VERBOSE)
return;
- // Cancel a pending alarm, if any.
- if (progress_automatic) {
- my_alarm(0);
- progress_active = false;
- }
-
- const double elapsed = my_time() - start_time;
-
+ uint64_t in_pos;
uint64_t compressed_pos;
uint64_t uncompressed_pos;
- if (opt_mode == MODE_COMPRESS) {
- compressed_pos = out_pos;
- uncompressed_pos = in_pos;
- } else {
- compressed_pos = in_pos;
- uncompressed_pos = out_pos;
- }
+ progress_pos(&in_pos, &compressed_pos, &uncompressed_pos);
+
+ // Avoid printing intermediate progress info if some error occurs
+ // in the beginning of the stream. (If something goes wrong later in
+ // the stream, it is sometimes useful to tell the user where the
+ // error approximately occurred, especially if the error occurs
+ // after a time-consuming operation.)
+ if (!finished && !progress_active
+ && (compressed_pos == 0 || uncompressed_pos == 0))
+ return;
- // If it took less than a second, don't display the time.
- const char *elapsed_str = progress_time((double)(elapsed));
+ progress_active = false;
+
+ const uint64_t elapsed = progress_elapsed();
+ const char *elapsed_str = progress_time(elapsed);
signals_block();
// When using the auto-updating progress indicator, the final
// statistics are printed in the same format as the progress
// indicator itself.
- if (progress_automatic && in_pos > 0) {
+ if (progress_automatic) {
// Using floating point conversion for the percentage instead
// of static "100.0 %" string, because the decimal separator
// isn't a dot in all locales.
- fprintf(stderr, " %5.1f %% %43s %11s %10s\n",
- 100.0,
+ fprintf(stderr, " %7s %43s %9s %10s\n",
+ progress_percentage(in_pos, finished),
progress_sizes(compressed_pos, uncompressed_pos, true),
progress_speed(uncompressed_pos, elapsed),
elapsed_str);
-
- // When no automatic progress indicator is used, don't print a verbose
- // message at all if we something went wrong and we couldn't produce
- // any output. If we did produce output, then it is sometimes useful
- // to tell that to the user, especially if we detected an error after
- // a time-consuming operation.
- } else if (success || out_pos > 0) {
- // The filename and size information are always printed.
- fprintf(stderr, "%s: %s", filename, progress_sizes(
+ } else {
+ // The filename is always printed.
+ fprintf(stderr, "%s: ", filename);
+
+ // Percentage is printed only if we didn't finish yet.
+ // FIXME: This may look weird when size of the input
+ // isn't known.
+ if (!finished)
+ fprintf(stderr, "%s, ",
+ progress_percentage(in_pos, false));
+
+ // Size information is always printed.
+ fprintf(stderr, "%s", progress_sizes(
compressed_pos, uncompressed_pos, true));
// The speed and elapsed time aren't always shown.
@@ -631,22 +756,23 @@ message_progress_end(uint64_t in_pos, uint64_t out_pos, bool success)
}
+extern void
+message_progress_end(bool success)
+{
+ assert(progress_started);
+ progress_flush(success);
+ progress_started = false;
+ return;
+}
+
+
static void
vmessage(enum message_verbosity v, const char *fmt, va_list ap)
{
if (v <= verbosity) {
signals_block();
- // If there currently is a progress message on the screen,
- // print a newline so that the progress message is left
- // readable. This is good, because it is nice to be able to
- // see where the error occurred. (The alternative would be
- // to clear the progress message and replace it with the
- // error message.)
- if (progress_active) {
- progress_active = false;
- fputc('\n', stderr);
- }
+ progress_flush(false);
fprintf(stderr, "%s: ", argv0);
vfprintf(stderr, fmt, ap);
@@ -889,7 +1015,7 @@ message_version(void)
{
// It is possible that liblzma version is different than the command
// line tool version, so print both.
- printf("xz " PACKAGE_VERSION "\n");
+ printf("xz (" PACKAGE_NAME ") " LZMA_VERSION_STRING "\n");
printf("liblzma %s\n", lzma_version_string());
my_exit(E_SUCCESS);
}
@@ -944,6 +1070,11 @@ message_help(bool long_help)
" compression, 6-9 excellent compression; default is 6"));
puts(_(
+" -e, --extreme use more CPU time when encoding to increase compression\n"
+" ratio without increasing memory usage of the decoder"));
+
+ if (long_help)
+ puts(_(
" -M, --memory=NUM use roughly NUM bytes of memory at maximum; 0 indicates\n"
" the default setting, which depends on the operation mode\n"
" and the amount of physical memory (RAM)"));
@@ -956,9 +1087,9 @@ message_help(bool long_help)
|| defined(HAVE_ENCODER_LZMA2) || defined(HAVE_DECODER_LZMA2)
puts(_(
"\n"
-" --lzma1=[OPTS] LZMA1 or LZMA2; OPTS is a comma-separated list of zero or\n"
-" --lzma2=[OPTS] more of the following options (valid values; default):\n"
-" preset=NUM reset options to preset number NUM (1-9)\n"
+" --lzma1[=OPTS] LZMA1 or LZMA2; OPTS is a comma-separated list of zero or\n"
+" --lzma2[=OPTS] more of the following options (valid values; default):\n"
+" preset=NUM reset options to preset number NUM (0-9)\n"
" dict=NUM dictionary size (4KiB - 1536MiB; 8MiB)\n"
" lc=NUM number of literal context bits (0-4; 3)\n"
" lp=NUM number of literal position bits (0-4; 0)\n"
@@ -971,17 +1102,19 @@ message_help(bool long_help)
puts(_(
"\n"
-" --x86 x86 filter (sometimes called BCJ filter)\n"
-" --powerpc PowerPC (big endian) filter\n"
-" --ia64 IA64 (Itanium) filter\n"
-" --arm ARM filter\n"
-" --armthumb ARM-Thumb filter\n"
-" --sparc SPARC filter"));
+" --x86[=OPTS] x86 BCJ filter\n"
+" --powerpc[=OPTS] PowerPC BCJ filter (big endian only)\n"
+" --ia64[=OPTS] IA64 (Itanium) BCJ filter\n"
+" --arm[=OPTS] ARM BCJ filter (little endian only)\n"
+" --armthumb[=OPTS] ARM-Thumb BCJ filter (little endian only)\n"
+" --sparc[=OPTS] SPARC BCJ filter\n"
+" Valid OPTS for all BCJ filters:\n"
+" start=NUM start offset for conversions (default=0)"));
#if defined(HAVE_ENCODER_DELTA) || defined(HAVE_DECODER_DELTA)
puts(_(
"\n"
-" --delta=[OPTS] Delta filter; valid OPTS (valid values; default):\n"
+" --delta[=OPTS] Delta filter; valid OPTS (valid values; default):\n"
" dist=NUM distance between bytes being subtracted\n"
" from each other (1-256; 1)"));
#endif
@@ -989,7 +1122,7 @@ message_help(bool long_help)
#if defined(HAVE_ENCODER_SUBBLOCK) || defined(HAVE_DECODER_SUBBLOCK)
puts(_(
"\n"
-" --subblock=[OPTS] Subblock filter; valid OPTS (valid values; default):\n"
+" --subblock[=OPTS] Subblock filter; valid OPTS (valid values; default):\n"
" size=NUM number of bytes of data per subblock\n"
" (1 - 256Mi; 4Ki)\n"
" rle=NUM run-length encoder chunk size (0-256; 0)"));
@@ -1005,6 +1138,10 @@ message_help(bool long_help)
if (long_help)
puts(_(
+" -Q, --no-warn make warnings not affect the exit status"));
+
+ if (long_help)
+ puts(_(
"\n"
" -h, --help display the short help (lists only the basic options)\n"
" -H, --long-help display this long help"));
@@ -1020,18 +1157,16 @@ message_help(bool long_help)
if (long_help) {
printf(_(
-"On this system and configuration, the tool will use at maximum of\n"
-" * roughly %'" PRIu64 " MiB RAM for compression;\n"
-" * roughly %'" PRIu64 " MiB RAM for decompression; and\n"),
- hardware_memlimit_encoder() / (1024 * 1024),
- hardware_memlimit_decoder() / (1024 * 1024));
- printf(N_(" * one thread for (de)compression.\n\n",
- " * %'" PRIu64 " threads for (de)compression.\n\n",
- (uint64_t)(opt_threads)), (uint64_t)(opt_threads));
+"On this system and configuration, this program will use at maximum of roughly\n"
+"%s MiB RAM and "), uint64_to_str(hardware_memlimit_get() / (1024 * 1024), 0));
+ printf(N_("one thread.\n\n", "%s threads.\n\n",
+ hardware_threadlimit_get()),
+ uint64_to_str(hardware_threadlimit_get(), 0));
}
printf(_("Report bugs to <%s> (in English or Finnish).\n"),
PACKAGE_BUGREPORT);
+ printf(_("%s home page: <%s>\n"), PACKAGE_NAME, PACKAGE_HOMEPAGE);
my_exit(E_SUCCESS);
}
diff --git a/Build/source/utils/xz-4.999.8beta/src/xz/message.h b/Build/source/utils/xz-4.999.9beta/src/xz/message.h
index 3d117fe5826..16e38b757cf 100644
--- a/Build/source/utils/xz-4.999.8beta/src/xz/message.h
+++ b/Build/source/utils/xz-4.999.9beta/src/xz/message.h
@@ -3,17 +3,10 @@
/// \file message.h
/// \brief Printing messages to stderr
//
-// Copyright (C) 2007-2008 Lasse Collin
+// Author: Lasse Collin
//
-// This program is free software; you can redistribute it and/or
-// modify it under the terms of the GNU Lesser General Public
-// License as published by the Free Software Foundation; either
-// version 2.1 of the License, or (at your option) any later version.
-//
-// This program is distributed in the hope that it will be useful,
-// but WITHOUT ANY WARRANTY; without even the implied warranty of
-// MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the GNU
-// Lesser General Public License for more details.
+// This file has been put into the public domain.
+// You can do whatever you want with this file.
//
///////////////////////////////////////////////////////////////////////////////
@@ -111,21 +104,29 @@ extern void message_version(void) lzma_attribute((noreturn));
extern void message_help(bool long_help) lzma_attribute((noreturn));
+/// \brief Start progress info handling
+///
+/// This must be paired with a call to message_progress_end() before the
+/// given *strm becomes invalid.
///
-extern void message_progress_start(const char *filename, uint64_t in_size);
+/// \param strm Pointer to lzma_stream used for the coding.
+/// \param filename Name of the input file. stdin_filename is
+/// handled specially.
+/// \param in_size Size of the input file, or zero if unknown.
+///
+extern void message_progress_start(
+ lzma_stream *strm, const char *filename, uint64_t in_size);
-///
-extern void message_progress_update(uint64_t in_pos, uint64_t out_pos);
+/// Update the progress info if in verbose mode and enough time has passed
+/// since the previous update. This can be called only when
+/// message_progress_start() has already been used.
+extern void message_progress_update(void);
/// \brief Finishes the progress message if we were in verbose mode
///
-/// \param in_pos Final input position i.e. how much input there was.
-/// \param out_pos Final output position
-/// \param success True if the operation was successful. We don't
-/// print the final progress message if the operation
-/// wasn't successful.
+/// \param finished True if the whole stream was successfully coded
+/// and output written to the output stream.
///
-extern void message_progress_end(
- uint64_t in_pos, uint64_t out_pos, bool success);
+extern void message_progress_end(bool finished);
diff --git a/Build/source/utils/xz-4.999.8beta/src/xz/options.c b/Build/source/utils/xz-4.999.9beta/src/xz/options.c
index efceba9e651..8ac6750403f 100644
--- a/Build/source/utils/xz-4.999.8beta/src/xz/options.c
+++ b/Build/source/utils/xz-4.999.9beta/src/xz/options.c
@@ -3,17 +3,10 @@
/// \file options.c
/// \brief Parser for filter-specific options
//
-// Copyright (C) 2007 Lasse Collin
+// Author: Lasse Collin
//
-// This program is free software; you can redistribute it and/or
-// modify it under the terms of the GNU Lesser General Public
-// License as published by the Free Software Foundation; either
-// version 2.1 of the License, or (at your option) any later version.
-//
-// This program is distributed in the hope that it will be useful,
-// but WITHOUT ANY WARRANTY; without even the implied warranty of
-// MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the GNU
-// Lesser General Public License for more details.
+// This file has been put into the public domain.
+// You can do whatever you want with this file.
//
///////////////////////////////////////////////////////////////////////////////
@@ -44,8 +37,13 @@ typedef struct {
/// Each option is a string, that is converted to an integer using the
/// index where the option string is in the array.
///
-/// Value can be either a number with minimum and maximum value limit, or
-/// a string-id map mapping a list of possible string values to integers.
+/// Value can be
+/// - a string-id map mapping a list of possible string values to integers
+/// (opts[i].map != NULL, opts[i].min and opts[i].max are ignored);
+/// - a number with minimum and maximum value limit
+/// (opts[i].map == NULL && opts[i].min != UINT64_MAX);
+/// - a string that will be parsed by the filter-specific code
+/// (opts[i].map == NULL && opts[i].min == UINT64_MAX, opts[i].max ignored)
///
/// When parsing both option and value succeed, a filter-specific function
/// is called, which should update the given value to filter-specific
@@ -61,7 +59,7 @@ typedef struct {
static void
parse_options(const char *str, const option_map *opts,
void (*set)(void *filter_options,
- uint32_t key, uint64_t value),
+ uint32_t key, uint64_t value, const char *valuestr),
void *filter_options)
{
if (str == NULL || str[0] == '\0')
@@ -71,6 +69,13 @@ parse_options(const char *str, const option_map *opts,
char *name = s;
while (true) {
+ if (*name == ',') {
+ if (*++name == '\0')
+ break;
+
+ continue;
+ }
+
char *split = strchr(name, ',');
if (split != NULL)
*split = '\0';
@@ -89,12 +94,7 @@ parse_options(const char *str, const option_map *opts,
if (strcmp(name, opts[i].name) != 0)
continue;
- if (opts[i].map == NULL) {
- // value is an integer.
- const uint64_t v = str_to_uint64(name, value,
- opts[i].min, opts[i].max);
- set(filter_options, i, v);
- } else {
+ if (opts[i].map != NULL) {
// value is a string which we should map
// to an integer.
size_t j;
@@ -108,7 +108,19 @@ parse_options(const char *str, const option_map *opts,
message_fatal(_("%s: Invalid option "
"value"), value);
- set(filter_options, i, opts[i].map[j].id);
+ set(filter_options, i, opts[i].map[j].id,
+ value);
+
+ } else if (opts[i].min == UINT64_MAX) {
+ // value is a special string that will be
+ // parsed by set().
+ set(filter_options, i, 0, value);
+
+ } else {
+ // value is an integer.
+ const uint64_t v = str_to_uint64(name, value,
+ opts[i].min, opts[i].max);
+ set(filter_options, i, v, value);
}
found = true;
@@ -141,7 +153,8 @@ enum {
static void
-set_subblock(void *options, uint32_t key, uint64_t value)
+set_subblock(void *options, uint32_t key, uint64_t value,
+ const char *valuestr lzma_attribute((unused)))
{
lzma_options_subblock *opt = options;
@@ -199,7 +212,8 @@ enum {
static void
-set_delta(void *options, uint32_t key, uint64_t value)
+set_delta(void *options, uint32_t key, uint64_t value,
+ const char *valuestr lzma_attribute((unused)))
{
lzma_options_delta *opt = options;
switch (key) {
@@ -232,6 +246,47 @@ options_delta(const char *str)
}
+/////////
+// BCJ //
+/////////
+
+enum {
+ OPT_START_OFFSET,
+};
+
+
+static void
+set_bcj(void *options, uint32_t key, uint64_t value,
+ const char *valuestr lzma_attribute((unused)))
+{
+ lzma_options_bcj *opt = options;
+ switch (key) {
+ case OPT_START_OFFSET:
+ opt->start_offset = value;
+ break;
+ }
+}
+
+
+extern lzma_options_bcj *
+options_bcj(const char *str)
+{
+ static const option_map opts[] = {
+ { "start", NULL, 0, UINT32_MAX },
+ { NULL, NULL, 0, 0 }
+ };
+
+ lzma_options_bcj *options = xmalloc(sizeof(lzma_options_bcj));
+ *options = (lzma_options_bcj){
+ .start_offset = 0,
+ };
+
+ parse_options(str, opts, &set_bcj, options);
+
+ return options;
+}
+
+
//////////
// LZMA //
//////////
@@ -249,17 +304,42 @@ enum {
};
+static void lzma_attribute((noreturn))
+error_lzma_preset(const char *valuestr)
+{
+ message_fatal(_("Unsupported LZMA1/LZMA2 preset: %s"), valuestr);
+}
+
+
static void
-set_lzma(void *options, uint32_t key, uint64_t value)
+set_lzma(void *options, uint32_t key, uint64_t value, const char *valuestr)
{
lzma_options_lzma *opt = options;
switch (key) {
- case OPT_PRESET:
- if (lzma_lzma_preset(options, (uint32_t)(value)))
- message_fatal("LZMA1/LZMA2 preset %u is not supported",
- (unsigned int)(value));
+ case OPT_PRESET: {
+ if (valuestr[0] < '0' || valuestr[0] > '9')
+ error_lzma_preset(valuestr);
+
+ uint32_t preset = valuestr[0] - '0';
+
+ // Currently only "e" is supported as a modifier,
+ // so keep this simple for now.
+ if (valuestr[1] != '\0') {
+ if (valuestr[1] == 'e')
+ preset |= LZMA_PRESET_EXTREME;
+ else
+ error_lzma_preset(valuestr);
+
+ if (valuestr[2] != '\0')
+ error_lzma_preset(valuestr);
+ }
+
+ if (lzma_lzma_preset(options, preset))
+ error_lzma_preset(valuestr);
+
break;
+ }
case OPT_DICT:
opt->dict_size = value;
@@ -315,7 +395,7 @@ options_lzma(const char *str)
};
static const option_map opts[] = {
- { "preset", NULL, 0, 9 },
+ { "preset", NULL, UINT64_MAX, 0 },
{ "dict", NULL, LZMA_DICT_SIZE_MIN,
(UINT32_C(1) << 30) + (UINT32_C(1) << 29) },
{ "lc", NULL, LZMA_LCLP_MIN, LZMA_LCLP_MAX },
@@ -328,8 +408,6 @@ options_lzma(const char *str)
{ NULL, NULL, 0, 0 }
};
- // TODO There should be a way to take some preset as the base for
- // custom settings.
lzma_options_lzma *options = xmalloc(sizeof(lzma_options_lzma));
*options = (lzma_options_lzma){
.dict_size = LZMA_DICT_SIZE_DEFAULT,
diff --git a/Build/source/utils/xz-4.999.8beta/src/xz/options.h b/Build/source/utils/xz-4.999.9beta/src/xz/options.h
index 3835d12ac77..e7389c8e99c 100644
--- a/Build/source/utils/xz-4.999.8beta/src/xz/options.h
+++ b/Build/source/utils/xz-4.999.9beta/src/xz/options.h
@@ -3,17 +3,10 @@
/// \file options.h
/// \brief Parser for filter-specific options
//
-// Copyright (C) 2007 Lasse Collin
+// Author: Lasse Collin
//
-// This program is free software; you can redistribute it and/or
-// modify it under the terms of the GNU Lesser General Public
-// License as published by the Free Software Foundation; either
-// version 2.1 of the License, or (at your option) any later version.
-//
-// This program is distributed in the hope that it will be useful,
-// but WITHOUT ANY WARRANTY; without even the implied warranty of
-// MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the GNU
-// Lesser General Public License for more details.
+// This file has been put into the public domain.
+// You can do whatever you want with this file.
//
///////////////////////////////////////////////////////////////////////////////
@@ -31,6 +24,13 @@ extern lzma_options_subblock *options_subblock(const char *str);
extern lzma_options_delta *options_delta(const char *str);
+/// \brief Parser for BCJ options
+///
+/// \return Pointer to allocated options structure.
+/// Doesn't return on error.
+extern lzma_options_bcj *options_bcj(const char *str);
+
+
/// \brief Parser for LZMA options
///
/// \return Pointer to allocated options structure.
diff --git a/Build/source/utils/xz-4.999.8beta/src/xz/private.h b/Build/source/utils/xz-4.999.9beta/src/xz/private.h
index 21c3559a171..6141b88c416 100644
--- a/Build/source/utils/xz-4.999.8beta/src/xz/private.h
+++ b/Build/source/utils/xz-4.999.9beta/src/xz/private.h
@@ -3,17 +3,10 @@
/// \file private.h
/// \brief Common includes, definions, and prototypes
//
-// Copyright (C) 2007 Lasse Collin
+// Author: Lasse Collin
//
-// This program is free software; you can redistribute it and/or
-// modify it under the terms of the GNU Lesser General Public
-// License as published by the Free Software Foundation; either
-// version 2.1 of the License, or (at your option) any later version.
-//
-// This program is distributed in the hope that it will be useful,
-// but WITHOUT ANY WARRANTY; without even the implied warranty of
-// MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the GNU
-// Lesser General Public License for more details.
+// This file has been put into the public domain.
+// You can do whatever you want with this file.
//
///////////////////////////////////////////////////////////////////////////////
@@ -51,11 +44,11 @@
#endif
#include "main.h"
-#include "process.h"
+#include "coder.h"
#include "message.h"
#include "args.h"
#include "hardware.h"
-#include "io.h"
+#include "file_io.h"
#include "options.h"
#include "signals.h"
#include "suffix.h"
diff --git a/Build/source/utils/xz-4.999.8beta/src/xz/signals.c b/Build/source/utils/xz-4.999.9beta/src/xz/signals.c
index f19f3f9b2c2..c9acab26a00 100644
--- a/Build/source/utils/xz-4.999.8beta/src/xz/signals.c
+++ b/Build/source/utils/xz-4.999.9beta/src/xz/signals.c
@@ -3,17 +3,10 @@
/// \file signals.c
/// \brief Handling signals to abort operation
//
-// Copyright (C) 2007-2009 Lasse Collin
+// Author: Lasse Collin
//
-// This program is free software; you can redistribute it and/or
-// modify it under the terms of the GNU Lesser General Public
-// License as published by the Free Software Foundation; either
-// version 2.1 of the License, or (at your option) any later version.
-//
-// This program is distributed in the hope that it will be useful,
-// but WITHOUT ANY WARRANTY; without even the implied warranty of
-// MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the GNU
-// Lesser General Public License for more details.
+// This file has been put into the public domain.
+// You can do whatever you want with this file.
//
///////////////////////////////////////////////////////////////////////////////
diff --git a/Build/source/utils/xz-4.999.8beta/src/xz/signals.h b/Build/source/utils/xz-4.999.9beta/src/xz/signals.h
index d963a416ef9..48945b22403 100644
--- a/Build/source/utils/xz-4.999.8beta/src/xz/signals.h
+++ b/Build/source/utils/xz-4.999.9beta/src/xz/signals.h
@@ -3,17 +3,10 @@
/// \file signals.h
/// \brief Handling signals to abort operation
//
-// Copyright (C) 2007-2009 Lasse Collin
+// Author: Lasse Collin
//
-// This program is free software; you can redistribute it and/or
-// modify it under the terms of the GNU Lesser General Public
-// License as published by the Free Software Foundation; either
-// version 2.1 of the License, or (at your option) any later version.
-//
-// This program is distributed in the hope that it will be useful,
-// but WITHOUT ANY WARRANTY; without even the implied warranty of
-// MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the GNU
-// Lesser General Public License for more details.
+// This file has been put into the public domain.
+// You can do whatever you want with this file.
//
///////////////////////////////////////////////////////////////////////////////
diff --git a/Build/source/utils/xz-4.999.8beta/src/xz/suffix.c b/Build/source/utils/xz-4.999.9beta/src/xz/suffix.c
index 0d46855aaed..f9052832634 100644
--- a/Build/source/utils/xz-4.999.8beta/src/xz/suffix.c
+++ b/Build/source/utils/xz-4.999.9beta/src/xz/suffix.c
@@ -3,22 +3,20 @@
/// \file suffix.c
/// \brief Checks filename suffix and creates the destination filename
//
-// Copyright (C) 2007 Lasse Collin
+// Author: Lasse Collin
//
-// This program is free software; you can redistribute it and/or
-// modify it under the terms of the GNU Lesser General Public
-// License as published by the Free Software Foundation; either
-// version 2.1 of the License, or (at your option) any later version.
-//
-// This program is distributed in the hope that it will be useful,
-// but WITHOUT ANY WARRANTY; without even the implied warranty of
-// MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the GNU
-// Lesser General Public License for more details.
+// This file has been put into the public domain.
+// You can do whatever you want with this file.
//
///////////////////////////////////////////////////////////////////////////////
#include "private.h"
+// For case-insensitive filename suffix on case-insensitive systems
+#ifdef DOSLIKE
+# define strcmp strcasecmp
+#endif
+
static char *custom_suffix = NULL;
diff --git a/Build/source/utils/xz-4.999.8beta/src/xz/suffix.h b/Build/source/utils/xz-4.999.9beta/src/xz/suffix.h
index 623d96815d8..5537d7324f4 100644
--- a/Build/source/utils/xz-4.999.8beta/src/xz/suffix.h
+++ b/Build/source/utils/xz-4.999.9beta/src/xz/suffix.h
@@ -3,17 +3,10 @@
/// \file suffix.h
/// \brief Checks filename suffix and creates the destination filename
//
-// Copyright (C) 2007 Lasse Collin
+// Author: Lasse Collin
//
-// This program is free software; you can redistribute it and/or
-// modify it under the terms of the GNU Lesser General Public
-// License as published by the Free Software Foundation; either
-// version 2.1 of the License, or (at your option) any later version.
-//
-// This program is distributed in the hope that it will be useful,
-// but WITHOUT ANY WARRANTY; without even the implied warranty of
-// MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the GNU
-// Lesser General Public License for more details.
+// This file has been put into the public domain.
+// You can do whatever you want with this file.
//
///////////////////////////////////////////////////////////////////////////////
diff --git a/Build/source/utils/xz-4.999.8beta/src/xz/util.c b/Build/source/utils/xz-4.999.9beta/src/xz/util.c
index e1716bcbdcb..d160ea0d600 100644
--- a/Build/source/utils/xz-4.999.8beta/src/xz/util.c
+++ b/Build/source/utils/xz-4.999.9beta/src/xz/util.c
@@ -3,23 +3,25 @@
/// \file util.c
/// \brief Miscellaneous utility functions
//
-// Copyright (C) 2007 Lasse Collin
+// Author: Lasse Collin
//
-// This program is free software; you can redistribute it and/or
-// modify it under the terms of the GNU Lesser General Public
-// License as published by the Free Software Foundation; either
-// version 2.1 of the License, or (at your option) any later version.
-//
-// This program is distributed in the hope that it will be useful,
-// but WITHOUT ANY WARRANTY; without even the implied warranty of
-// MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the GNU
-// Lesser General Public License for more details.
+// This file has been put into the public domain.
+// You can do whatever you want with this file.
//
///////////////////////////////////////////////////////////////////////////////
#include "private.h"
+// Thousand separator for format strings is not supported outside POSIX.
+// This is used in uint64_to_str() and double_to_str().
+#ifdef DOSLIKE
+# define THOUSAND ""
+#else
+# define THOUSAND "'"
+#endif
+
+
extern void *
xrealloc(void *ptr, size_t size)
{
@@ -52,6 +54,10 @@ str_to_uint64(const char *name, const char *value, uint64_t min, uint64_t max)
while (*value == ' ' || *value == '\t')
++value;
+ // Accept special value "max". Supporting "min" doesn't seem useful.
+ if (strcmp(value, "max") == 0)
+ return max;
+
if (*value < '0' || *value > '9')
message_fatal(_("%s: Value is not a non-negative "
"decimal integer"), value);
@@ -121,6 +127,31 @@ error:
}
+extern const char *
+uint64_to_str(uint64_t value, uint32_t slot)
+{
+ // 2^64 with thousand separators is 26 bytes plus trailing '\0'.
+ static char bufs[4][32];
+
+ assert(slot < ARRAY_SIZE(bufs));
+
+ snprintf(bufs[slot], sizeof(bufs[slot]), "%" THOUSAND PRIu64, value);
+ return bufs[slot];
+}
+
+
+extern const char *
+double_to_str(double value)
+{
+ // 64 bytes is surely enough, since it won't fit in some other
+ // fields anyway.
+ static char buf[64];
+
+ snprintf(buf, sizeof(buf), "%" THOUSAND ".1f", value);
+ return buf;
+}
+
+
/*
/// \brief Simple quoting to get rid of ASCII control characters
///
diff --git a/Build/source/utils/xz-4.999.8beta/src/xz/util.h b/Build/source/utils/xz-4.999.9beta/src/xz/util.h
index 8b4bc3f8828..3657eb80da4 100644
--- a/Build/source/utils/xz-4.999.8beta/src/xz/util.h
+++ b/Build/source/utils/xz-4.999.9beta/src/xz/util.h
@@ -3,17 +3,10 @@
/// \file util.h
/// \brief Miscellaneous utility functions
//
-// Copyright (C) 2007 Lasse Collin
+// Author: Lasse Collin
//
-// This program is free software; you can redistribute it and/or
-// modify it under the terms of the GNU Lesser General Public
-// License as published by the Free Software Foundation; either
-// version 2.1 of the License, or (at your option) any later version.
-//
-// This program is distributed in the hope that it will be useful,
-// but WITHOUT ANY WARRANTY; without even the implied warranty of
-// MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the GNU
-// Lesser General Public License for more details.
+// This file has been put into the public domain.
+// You can do whatever you want with this file.
//
///////////////////////////////////////////////////////////////////////////////
@@ -48,6 +41,26 @@ extern uint64_t str_to_uint64(const char *name, const char *value,
uint64_t min, uint64_t max);
+/// \brief Convert uint64_t to a string
+///
+/// Convert the given value to a string with locale-specific thousand
+/// separators, if supported by the snprintf() implementation. The string
+/// is stored into an internal static buffer indicated by the slot argument.
+/// A pointer to the selected buffer is returned.
+///
+/// This function exists, because non-POSIX systems don't support thousand
+/// separator in format strings. Solving the problem in a simple way doesn't
+/// work, because it breaks gettext (specifically, the xgettext tool).
+extern const char *uint64_to_str(uint64_t value, uint32_t slot);
+
+
+/// \brief Convert double to a string with one decimal place
+///
+/// This is like uint64_to_str() except that this converts a double and
+/// uses exactly one decimal place.
+extern const char *double_to_str(double value);
+
+
/// \brief Check if filename is empty and print an error message
extern bool is_empty_filename(const char *filename);
diff --git a/Build/source/utils/xz-4.999.9beta/src/xz/xz.1 b/Build/source/utils/xz-4.999.9beta/src/xz/xz.1
new file mode 100644
index 00000000000..2fef75f43a5
--- /dev/null
+++ b/Build/source/utils/xz-4.999.9beta/src/xz/xz.1
@@ -0,0 +1,1250 @@
+'\" t
+.\"
+.\" Author: Lasse Collin
+.\"
+.\" This file has been put into the public domain.
+.\" You can do whatever you want with this file.
+.\"
+.TH XZ 1 "2009-08-27" "Tukaani" "XZ Utils"
+.SH NAME
+xz, unxz, xzcat, lzma, unlzma, lzcat \- Compress or decompress .xz and .lzma files
+.SH SYNOPSIS
+.B xz
+.RI [ option ]...
+.RI [ file ]...
+.PP
+.B unxz
+is equivalent to
+.BR "xz \-\-decompress" .
+.br
+.B xzcat
+is equivalent to
+.BR "xz \-\-decompress \-\-stdout" .
+.br
+.B lzma
+is equivalent to
+.BR "xz \-\-format=lzma" .
+.br
+.B unlzma
+is equivalent to
+.BR "xz \-\-format=lzma \-\-decompress" .
+.br
+.B lzcat
+is equivalent to
+.BR "xz \-\-format=lzma \-\-decompress \-\-stdout" .
+.PP
+When writing scripts that need to decompress files, it is recommended to
+always use the name
+.B xz
+with appropriate arguments
+.RB ( "xz \-d"
+or
+.BR "xz \-dc" )
+instead of the names
+.B unxz
+and
+.BR xzcat.
+.SH DESCRIPTION
+.B xz
+is a general-purpose data compression tool with command line syntax similar to
+.BR gzip (1)
+and
+.BR bzip2 (1).
+The native file format is the
+.B .xz
+format, but also the legacy
+.B .lzma
+format and raw compressed streams with no container format headers
+are supported.
+.PP
+.B xz
+compresses or decompresses each
+.I file
+according to the selected operation mode.
+If no
+.I files
+are given or
+.I file
+is
+.BR \- ,
+.B xz
+reads from standard input and writes the processed data to standard output.
+.B xz
+will refuse (display an error and skip the
+.IR file )
+to write compressed data to standard output if it is a terminal. Similarly,
+.B xz
+will refuse to read compressed data from standard input if it is a terminal.
+.PP
+Unless
+.B \-\-stdout
+is specified,
+.I files
+other than
+.B \-
+are written to a new file whose name is derived from the source
+.I file
+name:
+.IP \(bu 3
+When compressing, the suffix of the target file format
+.RB ( .xz
+or
+.BR .lzma )
+is appended to the source filename to get the target filename.
+.IP \(bu 3
+When decompressing, the
+.B .xz
+or
+.B .lzma
+suffix is removed from the filename to get the target filename.
+.B xz
+also recognizes the suffixes
+.B .txz
+and
+.BR .tlz ,
+and replaces them with the
+.B .tar
+suffix.
+.PP
+If the target file already exists, an error is displayed and the
+.I file
+is skipped.
+.PP
+Unless writing to standard output,
+.B xz
+will display a warning and skip the
+.I file
+if any of the following applies:
+.IP \(bu 3
+.I File
+is not a regular file. Symbolic links are not followed, thus they
+are never considered to be regular files.
+.IP \(bu 3
+.I File
+has more than one hardlink.
+.IP \(bu 3
+.I File
+has setuid, setgid, or sticky bit set.
+.IP \(bu 3
+The operation mode is set to compress, and the
+.I file
+already has a suffix of the target file format
+.RB ( .xz
+or
+.B .txz
+when compressing to the
+.B .xz
+format, and
+.B .lzma
+or
+.B .tlz
+when compressing to the
+.B .lzma
+format).
+.IP \(bu 3
+The operation mode is set to decompress, and the
+.I file
+doesn't have a suffix of any of the supported file formats
+.RB ( .xz ,
+.BR .txz ,
+.BR .lzma ,
+or
+.BR .tlz ).
+.PP
+After successfully compressing or decompressing the
+.IR file ,
+.B xz
+copies the owner, group, permissions, access time, and modification time
+from the source
+.I file
+to the target file. If copying the group fails, the permissions are modified
+so that the target file doesn't become accessible to users who didn't have
+permission to access the source
+.IR file .
+.B xz
+doesn't support copying other metadata like access control lists
+or extended attributes yet.
+.PP
+Once the target file has been successfully closed, the source
+.I file
+is removed unless
+.B \-\-keep
+was specified. The source
+.I file
+is never removed if the output is written to standard output.
+.PP
+Sending
+.B SIGINFO
+or
+.B SIGUSR1
+to the
+.B xz
+process makes it print progress information to standard error.
+This has only limited use since when standard error is a terminal, using
+.B \-\-verbose
+will display an automatically updating progress indicator.
+.SS "Memory usage"
+The memory usage of
+.B xz
+varies from a few hundred kilobytes to several gigabytes depending on
+the compression settings. The settings used when compressing a file
+affect also the memory usage of the decompressor. Typically the decompressor
+needs only 5\ % to 20\ % of the amount of RAM that the compressor needed when
+creating the file. Still, the worst-case memory usage of the decompressor
+is several gigabytes.
+.PP
+To prevent uncomfortable surprises caused by huge memory usage,
+.B xz
+has a built-in memory usage limiter. The default limit is 40 % of total
+physical RAM. While operating systems provide ways to limit the memory usage
+of processes, relying on it wasn't deemed to be flexible enough.
+.PP
+When compressing, if the selected compression settings exceed the memory
+usage limit, the settings are automatically adjusted downwards and a notice
+about this is displayed. As an exception, if the memory usage limit is
+exceeded when compressing with
+.BR \-\-format=raw ,
+an error is displayed and
+.B xz
+will exit with exit status
+.BR 1 .
+.PP
+If source
+.I file
+cannot be decompressed without exceeding the memory usage limit, an error
+message is displayed and the file is skipped. Note that compressed files
+may contain many blocks, which may have been compressed with different
+settings. Typically all blocks will have roughly the same memory requirements,
+but it is possible that a block later in the file will exceed the memory usage
+limit, and an error about too low memory usage limit gets displayed after some
+data has already been decompressed.
+.PP
+The absolute value of the active memory usage limit can be seen near
+the bottom of the output of
+.BR \-\-long\-help .
+The default limit can be overriden with
+\fB\-\-memory=\fIlimit\fR.
+.SH OPTIONS
+.SS "Integer suffixes and special values"
+In most places where an integer argument is expected, an optional suffix
+is supported to easily indicate large integers. There must be no space
+between the integer and the suffix.
+.TP
+.BR k " or " kB
+The integer is multiplied by 1,000 (10^3). For example,
+.B "5k"
+or
+.B "5kB"
+equals
+.BR "5000" .
+.TP
+.BR Ki " or " KiB
+The integer is multiplied by 1,024 (2^10).
+.TP
+.BR M " or " MB
+The integer is multiplied by 1,000,000 (10^6).
+.TP
+.BR Mi " or " MiB
+The integer is multiplied by 1,048,576 (2^20).
+.TP
+.BR G " or " GB
+The integer is multiplied by 1,000,000,000 (10^9).
+.TP
+.BR Gi " or " GiB
+The integer is multiplied by 1,073,741,824 (2^30).
+.PP
+A special value
+.B max
+can be used to indicate the maximum integer value supported by the option.
+.SS "Operation mode"
+If multiple operation mode options are given, the last one takes effect.
+.TP
+.BR \-z ", " \-\-compress
+Compress. This is the default operation mode when no operation mode option
+is specified, and no other operation mode is implied from the command name
+(for example,
+.B unxz
+implies
+.BR \-\-decompress ).
+.TP
+.BR \-d ", " \-\-decompress ", " \-\-uncompress
+Decompress.
+.TP
+.BR \-t ", " \-\-test
+Test the integrity of compressed
+.IR files .
+No files are created or removed. This option is equivalent to
+.B "\-\-decompress \-\-stdout"
+except that the decompressed data is discarded instead of being
+written to standard output.
+.TP
+.BR \-l ", " \-\-list
+View information about the compressed files. No uncompressed output is
+produced, and no files are created or removed. In list mode, the program
+cannot read the compressed data from standard input or from other
+unseekable sources.
+.IP
+.B "This feature has not been implemented yet."
+.SS "Operation modifiers"
+.TP
+.BR \-k ", " \-\-keep
+Keep (don't delete) the input files.
+.TP
+.BR \-f ", " \-\-force
+This option has several effects:
+.RS
+.IP \(bu 3
+If the target file already exists, delete it before compressing or
+decompressing.
+.IP \(bu 3
+Compress or decompress even if the input is not a regular file,
+has more than one hardlink, or has setuid, setgid, or sticky bit set.
+The setuid, setgid, and sticky bits are not copied to the target file.
+.IP \(bu 3
+If combined with
+.B \-\-decompress
+.BR \-\-stdout
+and
+.B xz
+doesn't recognize the type of the source file,
+.B xz
+will copy the source file as is to standard output. This allows using
+.B xzcat
+.B \--force
+like
+.BR cat (1)
+for files that have not been compressed with
+.BR xz .
+Note that in future,
+.B xz
+might support new compressed file formats, which may make
+.B xz
+decompress more types of files instead of copying them as is to
+standard output.
+.BI \-\-format= format
+can be used to restrict
+.B xz
+to decompress only a single file format.
+.IP \(bu 3
+Allow writing compressed data to a terminal, and reading compressed data
+from a terminal.
+.RE
+.TP
+.BR \-c ", " \-\-stdout ", " \-\-to-stdout
+Write the compressed or decompressed data to standard output instead of
+a file. This implies
+.BR \-\-keep .
+.TP
+\fB\-S\fR \fI.suf\fR, \fB\-\-suffix=\fI.suf
+When compressing, use
+.I .suf
+as the suffix for the target file instead of
+.B .xz
+or
+.BR .lzma .
+If not writing to standard output and the source file already has the suffix
+.IR .suf ,
+a warning is displayed and the file is skipped.
+.IP
+When decompressing, recognize also files with the suffix
+.I .suf
+in addition to files with the
+.BR .xz ,
+.BR .txz ,
+.BR .lzma ,
+or
+.B .tlz
+suffix. If the source file has the suffix
+.IR .suf ,
+the suffix is removed to get the target filename.
+.IP
+When compressing or decompressing raw streams
+.RB ( \-\-format=raw ),
+the suffix must always be specified unless writing to standard output,
+because there is no default suffix for raw streams.
+.TP
+\fB\-\-files\fR[\fB=\fIfile\fR]
+Read the filenames to process from
+.IR file ;
+if
+.I file
+is omitted, filenames are read from standard input. Filenames must be
+terminated with the newline character. If filenames are given also as
+command line arguments, they are processed before the filenames read from
+.IR file .
+.TP
+\fB\-\-files0\fR[\fB=\fIfile\fR]
+This is identical to \fB\-\-files\fR[\fB=\fIfile\fR] except that the
+filenames must be terminated with the null character.
+.SS "Basic file format and compression options"
+.TP
+\fB\-F\fR \fIformat\fR, \fB\-\-format=\fIformat
+Specify the file format to compress or decompress:
+.RS
+.IP \(bu 3
+.BR auto :
+This is the default. When compressing,
+.B auto
+is equivalent to
+.BR xz .
+When decompressing, the format of the input file is autodetected. Note that
+raw streams (created with
+.BR \-\-format=raw )
+cannot be autodetected.
+.IP \(bu 3
+.BR xz :
+Compress to the
+.B .xz
+file format, or accept only
+.B .xz
+files when decompressing.
+.IP \(bu 3
+.B lzma
+or
+.BR alone :
+Compress to the legacy
+.B .lzma
+file format, or accept only
+.B .lzma
+files when decompressing. The alternative name
+.B alone
+is provided for backwards compatibility with LZMA Utils.
+.IP \(bu 3
+.BR raw :
+Compress or uncompress a raw stream (no headers). This is meant for advanced
+users only. To decode raw streams, you need to set not only
+.B \-\-format=raw
+but also specify the filter chain, which would normally be stored in the
+container format headers.
+.RE
+.TP
+\fB\-C\fR \fIcheck\fR, \fB\-\-check=\fIcheck
+Specify the type of the integrity check, which is calculated from the
+uncompressed data. This option has an effect only when compressing into the
+.B .xz
+format; the
+.B .lzma
+format doesn't support integrity checks.
+The integrity check (if any) is verified when the
+.B .xz
+file is decompressed.
+.IP
+Supported
+.I check
+types:
+.RS
+.IP \(bu 3
+.BR none :
+Don't calculate an integrity check at all. This is usually a bad idea. This
+can be useful when integrity of the data is verified by other means anyway.
+.IP \(bu 3
+.BR crc32 :
+Calculate CRC32 using the polynomial from IEEE-802.3 (Ethernet).
+.IP \(bu 3
+.BR crc64 :
+Calculate CRC64 using the polynomial from ECMA-182. This is the default, since
+it is slightly better than CRC32 at detecting damaged files and the speed
+difference is negligible.
+.IP \(bu 3
+.BR sha256 :
+Calculate SHA-256. This is somewhat slower than CRC32 and CRC64.
+.RE
+.IP
+Integrity of the
+.B .xz
+headers is always verified with CRC32. It is not possible to change or
+disable it.
+.TP
+.BR \-0 " ... " \-9
+Select compression preset. If a preset level is specified multiple times,
+the last one takes effect.
+.IP
+The compression preset levels can be categorised roughly into three
+categories:
+.RS
+.IP "\fB\-0\fR ... \fB\-2"
+Fast presets with relatively low memory usage.
+.B \-1
+and
+.B \-2
+should give compression speed and ratios comparable to
+.B "bzip2 \-1"
+and
+.BR "bzip2 \-9" ,
+respectively.
+Currently
+.B \-0
+is not very good (not much faster than
+.B \-1
+but much worse compression). In future,
+.B \-0
+may be indicate some fast algorithm instead of LZMA2.
+.IP "\fB\-3\fR ... \fB\-5"
+Good compression ratio with low to medium memory usage.
+These are significantly slower than levels 0\-2.
+.IP "\fB\-6\fR ... \fB\-9"
+Excellent compression with medium to high memory usage. These are also
+slower than the lower preset levels. The default is
+.BR \-6 .
+Unless you want to maximize the compression ratio, you probably don't want
+a higher preset level than
+.B \-7
+due to speed and memory usage.
+.RE
+.IP
+The exact compression settings (filter chain) used by each preset may
+vary between
+.B xz
+versions. The settings may also vary between files being compressed, if
+.B xz
+determines that modified settings will probably give better compression
+ratio without significantly affecting compression time or memory usage.
+.IP
+Because the settings may vary, the memory usage may vary too. The following
+table lists the maximum memory usage of each preset level, which won't be
+exceeded even in future versions of
+.BR xz .
+.IP
+.B "FIXME: The table below is just a rough idea."
+.RS
+.RS
+.TS
+tab(;);
+c c c
+n n n.
+Preset;Compression;Decompression
+\-0;6 MiB;1 MiB
+\-1;6 MiB;1 MiB
+\-2;10 MiB;1 MiB
+\-3;20 MiB;2 MiB
+\-4;30 MiB;3 MiB
+\-5;60 MiB;6 MiB
+\-6;100 MiB;10 MiB
+\-7;200 MiB;20 MiB
+\-8;400 MiB;40 MiB
+\-9;800 MiB;80 MiB
+.TE
+.RE
+.RE
+.IP
+When compressing,
+.B xz
+automatically adjusts the compression settings downwards if
+the memory usage limit would be exceeded, so it is safe to specify
+a high preset level even on systems that don't have lots of RAM.
+.TP
+.BR \-\-fast " and " \-\-best
+These are somewhat misleading aliases for
+.B \-0
+and
+.BR \-9 ,
+respectively.
+These are provided only for backwards compatibility with LZMA Utils.
+Avoid using these options.
+.IP
+Especially the name of
+.B \-\-best
+is misleading, because the definition of best depends on the input data,
+and that usually people don't want the very best compression ratio anyway,
+because it would be very slow.
+.TP
+.BR \-e ", " \-\-extreme
+Modify the compression preset (\fB\-0\fR ... \fB\-9\fR) so that a little bit
+better compression ratio can be achieved without increasing memory usage
+of the compressor or decompressor (exception: compressor memory usage may
+increase a little with presets \fB\-0\fR ... \fB\-2\fR). The downside is that
+the compression time will increase dramatically (it can easily double).
+.TP
+\fB\-M\fR \fIlimit\fR, \fB\-\-memory=\fIlimit
+Set the memory usage limit. If this option is specied multiple times,
+the last one takes effect. The
+.I limit
+can be specified in multiple ways:
+.RS
+.IP \(bu 3
+The
+.I limit
+can be an absolute value in bytes. Using an integer suffix like
+.B MiB
+can be useful. Example:
+.B "\-\-memory=80MiB"
+.IP \(bu 3
+The
+.I limit
+can be specified as a percentage of physical RAM. Example:
+.B "\-\-memory=70%"
+.IP \(bu 3
+The
+.I limit
+can be reset back to its default value (currently 40 % of physical RAM)
+by setting it to
+.BR 0 .
+.IP \(bu 3
+The memory usage limiting can be effectively disabled by setting
+.I limit
+to
+.BR max .
+This isn't recommended. It's usually better to use, for example,
+.BR \-\-memory=90% .
+.RE
+.IP
+The current
+.I limit
+can be seen near the bottom of the output of the
+.B \-\-long-help
+option.
+.TP
+\fB\-T\fR \fIthreads\fR, \fB\-\-threads=\fIthreads
+Specify the maximum number of worker threads to use. The default is
+the number of available CPU cores. You can see the current value of
+.I threads
+near the end of the output of the
+.B \-\-long\-help
+option.
+.IP
+The actual number of worker threads can be less than
+.I threads
+if using more threads would exceed the memory usage limit.
+In addition to CPU-intensive worker threads,
+.B xz
+may use a few auxiliary threads, which don't use a lot of CPU time.
+.IP
+.B "Multithreaded compression and decompression are not implemented yet,"
+.B "so this option has no effect for now."
+.SS Custom compressor filter chains
+A custom filter chain allows specifying the compression settings in detail
+instead of relying on the settings associated to the preset levels.
+When a custom filter chain is specified, the compression preset level options
+(\fB\-0\fR ... \fB\-9\fR and \fB\-\-extreme\fR) are silently ignored.
+.PP
+A filter chain is comparable to piping on the UN*X command line.
+When compressing, the uncompressed input goes to the first filter, whose
+output goes to the next filter (if any). The output of the last filter
+gets written to the compressed file. The maximum number of filters in
+the chain is four, but typically a filter chain has only one or two filters.
+.PP
+Many filters have limitations where they can be in the filter chain:
+some filters can work only as the last filter in the chain, some only
+as a non-last filter, and some work in any position in the chain. Depending
+on the filter, this limitation is either inherent to the filter design or
+exists to prevent security issues.
+.PP
+A custom filter chain is specified by using one or more filter options in
+the order they are wanted in the filter chain. That is, the order of filter
+options is significant! When decoding raw streams
+.RB ( \-\-format=raw ),
+the filter chain is specified in the same order as it was specified when
+compressing.
+.PP
+Filters take filter-specific
+.I options
+as a comma-separated list. Extra commas in
+.I options
+are ignored. Every option has a default value, so you need to
+specify only those you want to change.
+.TP
+\fB\-\-lzma1\fR[\fB=\fIoptions\fR], \fB\-\-lzma2\fR[\fB=\fIoptions\fR]
+Add LZMA1 or LZMA2 filter to the filter chain. These filter can be used
+only as the last filter in the chain.
+.IP
+LZMA1 is a legacy filter, which is supported almost solely due to the legacy
+.B .lzma
+file format, which supports only LZMA1. LZMA2 is an updated
+version of LZMA1 to fix some practical issues of LZMA1. The
+.B .xz
+format uses LZMA2, and doesn't support LZMA1 at all. Compression speed and
+ratios of LZMA1 and LZMA2 are practically the same.
+.IP
+LZMA1 and LZMA2 share the same set of
+.IR options :
+.RS
+.TP
+.BI preset= preset
+Reset all LZMA1 or LZMA2
+.I options
+to
+.IR preset .
+.I Preset
+consist of an integer, which may be followed by single-letter preset
+modifiers. The integer can be from
+.B 0
+to
+.BR 9 ,
+matching the command line options \fB\-0\fR ... \fB\-9\fR.
+The only supported modifier is currently
+.BR e ,
+which matches
+.BR \-\-extreme .
+.IP
+The default
+.I preset
+is
+.BR 6 ,
+from which the default values for the rest of the LZMA1 or LZMA2
+.I options
+are taken.
+.TP
+.BI dict= size
+Dictionary (history buffer) size indicates how many bytes of the recently
+processed uncompressed data is kept in memory. One method to reduce size of
+the uncompressed data is to store distance-length pairs, which
+indicate what data to repeat from the dictionary buffer. The bigger
+the dictionary, the better the compression ratio usually is,
+but dictionaries bigger than the uncompressed data are waste of RAM.
+.IP
+Typical dictionary size is from 64 KiB to 64 MiB. The minimum is 4 KiB.
+The maximum for compression is currently 1.5 GiB. The decompressor already
+supports dictionaries up to one byte less than 4 GiB, which is the
+maximum for LZMA1 and LZMA2 stream formats.
+.IP
+Dictionary size has the biggest effect on compression ratio.
+Dictionary size and match finder together determine the memory usage of
+the LZMA1 or LZMA2 encoder. The same dictionary size is required
+for decompressing that was used when compressing, thus the memory usage of
+the decoder is determined by the dictionary size used when compressing.
+.TP
+.BI lc= lc
+Specify the number of literal context bits. The minimum is
+.B 0
+and the maximum is
+.BR 4 ;
+the default is
+.BR 3 .
+In addition, the sum of
+.I lc
+and
+.I lp
+must not exceed
+.BR 4 .
+.TP
+.BI lp= lp
+Specify the number of literal position bits. The minimum is
+.B 0
+and the maximum is
+.BR 4 ;
+the default is
+.BR 0 .
+.TP
+.BI pb= pb
+Specify the number of position bits. The minimum is
+.B 0
+and the maximum is
+.BR 4 ;
+the default is
+.BR 2 .
+.TP
+.BI mode= mode
+Compression
+.I mode
+specifies the function used to analyze the data produced by the match finder.
+Supported
+.I modes
+are
+.B fast
+and
+.BR normal .
+The default is
+.B fast
+for
+.I presets
+.BR 0 \- 2
+and
+.B normal
+for
+.I presets
+.BR 3 \- 9 .
+.TP
+.BI mf= mf
+Match finder has a major effect on encoder speed, memory usage, and
+compression ratio. Usually Hash Chain match finders are faster than
+Binary Tree match finders. Hash Chains are usually used together with
+.B mode=fast
+and Binary Trees with
+.BR mode=normal .
+The memory usage formulas are only rough estimates,
+which are closest to reality when
+.I dict
+is a power of two.
+.RS
+.TP
+.B hc3
+Hash Chain with 2- and 3-byte hashing
+.br
+Minimum value for
+.IR nice :
+3
+.br
+Memory usage:
+.I dict
+* 7.5 (if
+.I dict
+<= 16 MiB);
+.br
+.I dict
+* 5.5 + 64 MiB (if
+.I dict
+> 16 MiB)
+.TP
+.B hc4
+Hash Chain with 2-, 3-, and 4-byte hashing
+.br
+Minimum value for
+.IR nice :
+4
+.br
+Memory usage:
+.I dict
+* 7.5
+.TP
+.B bt2
+Binary Tree with 2-byte hashing
+.br
+Minimum value for
+.IR nice :
+2
+.br
+Memory usage:
+.I dict
+* 9.5
+.TP
+.B bt3
+Binary Tree with 2- and 3-byte hashing
+.br
+Minimum value for
+.IR nice :
+3
+.br
+Memory usage:
+.I dict
+* 11.5 (if
+.I dict
+<= 16 MiB);
+.br
+.I dict
+* 9.5 + 64 MiB (if
+.I dict
+> 16 MiB)
+.TP
+.B bt4
+Binary Tree with 2-, 3-, and 4-byte hashing
+.br
+Minimum value for
+.IR nice :
+4
+.br
+Memory usage:
+.I dict
+* 11.5
+.RE
+.TP
+.BI nice= nice
+Specify what is considered to be a nice length for a match. Once a match
+of at least
+.I nice
+bytes is found, the algorithm stops looking for possibly better matches.
+.IP
+.I nice
+can be 2\-273 bytes. Higher values tend to give better compression ratio
+at expense of speed. The default depends on the
+.I preset
+level.
+.TP
+.BI depth= depth
+Specify the maximum search depth in the match finder. The default is the
+special value
+.BR 0 ,
+which makes the compressor determine a reasonable
+.I depth
+from
+.I mf
+and
+.IR nice .
+.IP
+Using very high values for
+.I depth
+can make the encoder extremely slow with carefully crafted files.
+Avoid setting the
+.I depth
+over 1000 unless you are prepared to interrupt the compression in case it
+is taking too long.
+.RE
+.IP
+When decoding raw streams
+.RB ( \-\-format=raw ),
+LZMA2 needs only the value of
+.BR dict .
+LZMA1 needs also
+.BR lc ,
+.BR lp ,
+and
+.BR pb.
+.TP
+\fB\-\-x86\fR[\fB=\fIoptions\fR]
+.TP
+\fB\-\-powerpc\fR[\fB=\fIoptions\fR]
+.TP
+\fB\-\-ia64\fR[\fB=\fIoptions\fR]
+.TP
+\fB\-\-arm\fR[\fB=\fIoptions\fR]
+.TP
+\fB\-\-armthumb\fR[\fB=\fIoptions\fR]
+.TP
+\fB\-\-sparc\fR[\fB=\fIoptions\fR]
+Add a branch/call/jump (BCJ) filter to the filter chain. These filters
+can be used only as non-last filter in the filter chain.
+.IP
+A BCJ filter converts relative addresses in the machine code to their
+absolute counterparts. This doesn't change the size of the data, but
+it increases redundancy, which allows e.g. LZMA2 to get better
+compression ratio.
+.IP
+The BCJ filters are always reversible, so using a BCJ filter for wrong
+type of data doesn't cause any data loss. However, applying a BCJ filter
+for wrong type of data is a bad idea, because it tends to make the
+compression ratio worse.
+.IP
+Different instruction sets have have different alignment:
+.RS
+.RS
+.TS
+tab(;);
+l n l
+l n l.
+Filter;Alignment;Notes
+x86;1;32-bit and 64-bit x86
+PowerPC;4;Big endian only
+ARM;4;Little endian only
+ARM-Thumb;2;Little endian only
+IA-64;16;Big or little endian
+SPARC;4;Big or little endian
+.TE
+.RE
+.RE
+.IP
+Since the BCJ-filtered data is usually compressed with LZMA2, the compression
+ratio may be improved slightly if the LZMA2 options are set to match the
+alignment of the selected BCJ filter. For example, with the IA-64 filter,
+it's good to set
+.B pb=4
+with LZMA2 (2^4=16). The x86 filter is an exception; it's usually good to
+stick to LZMA2's default four-byte alignment when compressing x86 executables.
+.IP
+All BCJ filters support the same
+.IR options :
+.RS
+.TP
+.BI start= offset
+Specify the start
+.I offset
+that is used when converting between relative and absolute addresses.
+The
+.I offset
+must be a multiple of the alignment of the filter (see the table above).
+The default is zero. In practice, the default is good; specifying
+a custom
+.I offset
+is almost never useful.
+.IP
+Specifying a non-zero start
+.I offset
+is probably useful only if the executable has multiple sections, and there
+are many cross-section jumps or calls. Applying a BCJ filter separately for
+each section with proper start offset and then compressing the result as
+a single chunk may give some improvement in compression ratio compared
+to applying the BCJ filter with the default
+.I offset
+for the whole executable.
+.RE
+.TP
+\fB\-\-delta\fR[\fB=\fIoptions\fR]
+Add Delta filter to the filter chain. The Delta filter
+can be used only as non-last filter in the filter chain.
+.IP
+Currently only simple byte-wise delta calculation is supported. It can
+be useful when compressing e.g. uncompressed bitmap images or uncompressed
+PCM audio. However, special purpose algorithms may give significantly better
+results than Delta + LZMA2. This is true especially with audio, which
+compresses faster and better e.g. with FLAC.
+.IP
+Supported
+.IR options :
+.RS
+.TP
+.BI dist= distance
+Specify the
+.I distance
+of the delta calculation as bytes.
+.I distance
+must be 1\-256. The default is 1.
+.IP
+For example, with
+.B dist=2
+and eight-byte input A1 B1 A2 B3 A3 B5 A4 B7, the output will be
+A1 B1 01 02 01 02 01 02.
+.RE
+.SS "Other options"
+.TP
+.BR \-q ", " \-\-quiet
+Suppress warnings and notices. Specify this twice to suppress errors too.
+This option has no effect on the exit status. That is, even if a warning
+was suppressed, the exit status to indicate a warning is still used.
+.TP
+.BR \-v ", " \-\-verbose
+Be verbose. If standard error is connected to a terminal,
+.B xz
+will display a progress indicator.
+Specifying
+.B \-\-verbose
+twice will give even more verbose output (useful mostly for debugging).
+.TP
+.BR \-Q ", " \-\-no\-warn
+Don't set the exit status to
+.B 2
+even if a condition worth a warning was detected. This option doesn't affect
+the verbosity level, thus both
+.B \-\-quiet
+and
+.B \-\-no\-warn
+have to be used to not display warnings and to not alter the exit status.
+.TP
+.BR \-h ", " \-\-help
+Display a help message describing the most commonly used options,
+and exit successfully.
+.TP
+.BR \-H ", " \-\-long\-help
+Display a help message describing all features of
+.BR xz ,
+and exit successfully
+.TP
+.BR \-V ", " \-\-version
+Display the version number of
+.B xz
+and liblzma.
+.SH "EXIT STATUS"
+.TP
+.B 0
+All is good.
+.TP
+.B 1
+An error occurred.
+.TP
+.B 2
+Something worth a warning occurred, but no actual errors occurred.
+.PP
+Notices (not warnings or errors) printed on standard error don't affect
+the exit status.
+.SH ENVIRONMENT
+.TP
+.B XZ_OPT
+A space-separated list of options is parsed from
+.B XZ_OPT
+before parsing the options given on the command line. Note that only
+options are parsed from
+.BR XZ_OPT ;
+all non-options are silently ignored. Parsing is done with
+.BR getopt_long (3)
+which is used also for the command line arguments.
+.SH "LZMA UTILS COMPATIBILITY"
+The command line syntax of
+.B xz
+is practically a superset of
+.BR lzma ,
+.BR unlzma ,
+and
+.BR lzcat
+as found from LZMA Utils 4.32.x. In most cases, it is possible to replace
+LZMA Utils with XZ Utils without breaking existing scripts. There are some
+incompatibilities though, which may sometimes cause problems.
+.SS "Compression preset levels"
+The numbering of the compression level presets is not identical in
+.B xz
+and LZMA Utils.
+The most important difference is how dictionary sizes are mapped to different
+presets. Dictionary size is roughly equal to the decompressor memory usage.
+.RS
+.TS
+tab(;);
+c c c
+c n n.
+Level;xz;LZMA Utils
+\-1;64 KiB;64 KiB
+\-2;512 KiB;1 MiB
+\-3;1 MiB;512 KiB
+\-4;2 MiB;1 MiB
+\-5;4 MiB;2 MiB
+\-6;8 MiB;4 MiB
+\-7;16 MiB;8 MiB
+\-8;32 MiB;16 MiB
+\-9;64 MiB;32 MiB
+.TE
+.RE
+.PP
+The dictionary size differences affect the compressor memory usage too,
+but there are some other differences between LZMA Utils and XZ Utils, which
+make the difference even bigger:
+.RS
+.TS
+tab(;);
+c c c
+c n n.
+Level;xz;LZMA Utils 4.32.x
+\-1;2 MiB;2 MiB
+\-2;5 MiB;12 MiB
+\-3;13 MiB;12 MiB
+\-4;25 MiB;16 MiB
+\-5;48 MiB;26 MiB
+\-6;94 MiB;45 MiB
+\-7;186 MiB;83 MiB
+\-8;370 MiB;159 MiB
+\-9;674 MiB;311 MiB
+.TE
+.RE
+.PP
+The default preset level in LZMA Utils is
+.B \-7
+while in XZ Utils it is
+.BR \-6 ,
+so both use 8 MiB dictionary by default.
+.SS "Streamed vs. non-streamed .lzma files"
+Uncompressed size of the file can be stored in the
+.B .lzma
+header. LZMA Utils does that when compressing regular files.
+The alternative is to mark that uncompressed size is unknown and
+use end of payload marker to indicate where the decompressor should stop.
+LZMA Utils uses this method when uncompressed size isn't known, which is
+the case for example in pipes.
+.PP
+.B xz
+supports decompressing
+.B .lzma
+files with or without end of payload marker, but all
+.B .lzma
+files created by
+.B xz
+will use end of payload marker and have uncompressed size marked as unknown
+in the
+.B .lzma
+header. This may be a problem in some (uncommon) situations. For example, a
+.B .lzma
+decompressor in an embedded device might work only with files that have known
+uncompressed size. If you hit this problem, you need to use LZMA Utils or
+LZMA SDK to create
+.B .lzma
+files with known uncompressed size.
+.SS "Unsupported .lzma files"
+The
+.B .lzma
+format allows
+.I lc
+values up to 8, and
+.I lp
+values up to 4. LZMA Utils can decompress files with any
+.I lc
+and
+.IR lp ,
+but always creates files with
+.B lc=3
+and
+.BR lp=0 .
+Creating files with other
+.I lc
+and
+.I lp
+is possible with
+.B xz
+and with LZMA SDK.
+.PP
+The implementation of the LZMA1 filter in liblzma requires
+that the sum of
+.I lc
+and
+.I lp
+must not exceed 4. Thus,
+.B .lzma
+files which exceed this limitation, cannot be decompressed with
+.BR xz .
+.PP
+LZMA Utils creates only
+.B .lzma
+files which have dictionary size of
+.RI "2^" n
+(a power of 2), but accepts files with any dictionary size.
+liblzma accepts only
+.B .lzma
+files which have dictionary size of
+.RI "2^" n
+or
+.RI "2^" n " + 2^(" n "\-1)."
+This is to decrease false positives when autodetecting
+.B .lzma
+files.
+.PP
+These limitations shouldn't be a problem in practice, since practically all
+.B .lzma
+files have been compressed with settings that liblzma will accept.
+.SS "Trailing garbage"
+When decompressing, LZMA Utils silently ignore everything after the first
+.B .lzma
+stream. In most situations, this is a bug. This also means that LZMA Utils
+don't support decompressing concatenated
+.B .lzma
+files.
+.PP
+If there is data left after the first
+.B .lzma
+stream,
+.B xz
+considers the file to be corrupt. This may break obscure scripts which have
+assumed that trailing garbage is ignored.
+.SH NOTES
+.SS Compressed output may vary
+The exact compressed output produced from the same uncompressed input file
+may vary between XZ Utils versions even if compression options are identical.
+This is because the encoder can be improved (faster or better compression)
+without affecting the file format. The output can vary even between different
+builds of the same XZ Utils version, if different build options are used or
+if the endianness of the hardware is different for different builds.
+.PP
+The above means that implementing
+.B \-\-rsyncable
+to create rsyncable
+.B .xz
+files is not going to happen without freezing a part of the encoder
+implementation, which can then be used with
+.BR \-\-rsyncable .
+.SS Embedded .xz decompressors
+Embedded
+.B .xz
+decompressor implementations like XZ Embedded don't necessarily support files
+created with
+.I check
+types other than
+.B none
+and
+.BR crc32 .
+Since the default is \fB\-\-check=\fIcrc64\fR, you must use
+.B \-\-check=none
+or
+.B \-\-check=crc32
+when creating files for embedded systems.
+.PP
+Outside embedded systems, all
+.B .xz
+format decompressors support all the
+.I check
+types, or at least are able to decompress the file without verifying the
+integrity check if the particular
+.I check
+is not supported.
+.PP
+XZ Embedded supports BCJ filters, but only with the default start offset.
+.SH "SEE ALSO"
+.BR xzdec (1),
+.BR gzip (1),
+.BR bzip2 (1)
+.PP
+XZ Utils: <http://tukaani.org/xz/>
+.br
+XZ Embedded: <http://tukaani.org/xz/embedded.html>
+.br
+LZMA SDK: <http://7-zip.org/sdk.html>
diff --git a/Build/source/utils/xz-4.999.9beta/src/xz/xz_w32res.rc b/Build/source/utils/xz-4.999.9beta/src/xz/xz_w32res.rc
new file mode 100644
index 00000000000..bad30202991
--- /dev/null
+++ b/Build/source/utils/xz-4.999.9beta/src/xz/xz_w32res.rc
@@ -0,0 +1,12 @@
+/*
+ * Author: Lasse Collin
+ *
+ * This file has been put into the public domain.
+ * You can do whatever you want with this file.
+ */
+
+#define MY_TYPE VFT_APP
+#define MY_NAME "xz"
+#define MY_SUFFIX ".exe"
+#define MY_DESC "xz data compression tool for .xz and .lzma files"
+#include "common_w32res.rc"
diff --git a/Build/source/utils/xz-4.999.9beta/src/xzdec/Makefile.am b/Build/source/utils/xz-4.999.9beta/src/xzdec/Makefile.am
new file mode 100644
index 00000000000..aaa5b5f6490
--- /dev/null
+++ b/Build/source/utils/xz-4.999.9beta/src/xzdec/Makefile.am
@@ -0,0 +1,61 @@
+##
+## Author: Lasse Collin
+##
+## This file has been put into the public domain.
+## You can do whatever you want with this file.
+##
+
+# Windows resource compiler support. It's fine to use xz_CPPFLAGS
+# also for lzmadec.
+.rc.o:
+ $(RC) $(DEFS) $(DEFAULT_INCLUDES) $(INCLUDES) \
+ $(xzdec_CPPFLAGS) $(CPPFLAGS) $(RCFLAGS) -i $< -o $@
+
+
+bin_PROGRAMS = xzdec lzmadec
+
+xzdec_SOURCES = xzdec.c
+
+if COND_W32
+xzdec_SOURCES += xzdec_w32res.rc
+endif
+
+xzdec_CPPFLAGS = \
+ -I$(top_srcdir)/src/common \
+ -I$(top_srcdir)/src/liblzma/api \
+ -I$(top_builddir)/lib \
+ $(STATIC_CPPFLAGS)
+xzdec_LDFLAGS = $(STATIC_LDFLAGS)
+xzdec_LDADD = $(top_builddir)/src/liblzma/liblzma.la
+
+if COND_GNULIB
+xzdec_LDADD += $(top_builddir)/lib/libgnu.a
+endif
+
+xzdec_LDADD += $(LTLIBINTL)
+
+
+lzmadec_SOURCES = xzdec.c
+
+if COND_W32
+lzmadec_SOURCES += lzmadec_w32res.rc
+endif
+
+lzmadec_CPPFLAGS = $(xzdec_CPPFLAGS) -DLZMADEC
+lzmadec_LDFLAGS = $(xzdec_LDFLAGS)
+lzmadec_LDADD = $(xzdec_LDADD)
+
+
+dist_man_MANS = xzdec.1
+
+install-data-hook:
+ cd $(DESTDIR)$(mandir)/man1 && \
+ target=`echo xzdec | sed '$(transform)'` && \
+ link=`echo lzmadec | sed '$(transform)'` && \
+ rm -f $$link.1 && \
+ $(LN_S) $$target.1 $$link.1
+
+uninstall-hook:
+ cd $(DESTDIR)$(mandir)/man1 && \
+ link=`echo lzmadec | sed '$(transform)'` && \
+ rm -f $$link.1
diff --git a/Build/source/utils/xz-4.999.8beta/src/xzdec/Makefile.in b/Build/source/utils/xz-4.999.9beta/src/xzdec/Makefile.in
index bc42684b1e4..4fda1f5c883 100644
--- a/Build/source/utils/xz-4.999.8beta/src/xzdec/Makefile.in
+++ b/Build/source/utils/xz-4.999.9beta/src/xzdec/Makefile.in
@@ -1,8 +1,9 @@
-# Makefile.in generated by automake 1.10.2 from Makefile.am.
+# Makefile.in generated by automake 1.11 from Makefile.am.
# @configure_input@
# Copyright (C) 1994, 1995, 1996, 1997, 1998, 1999, 2000, 2001, 2002,
-# 2003, 2004, 2005, 2006, 2007, 2008 Free Software Foundation, Inc.
+# 2003, 2004, 2005, 2006, 2007, 2008, 2009 Free Software Foundation,
+# Inc.
# This Makefile.in is free software; the Free Software Foundation
# gives unlimited permission to copy and/or distribute it,
# with or without modifications, as long as this notice is preserved.
@@ -16,8 +17,9 @@
VPATH = @srcdir@
pkgdatadir = $(datadir)/@PACKAGE@
-pkglibdir = $(libdir)/@PACKAGE@
pkgincludedir = $(includedir)/@PACKAGE@
+pkglibdir = $(libdir)/@PACKAGE@
+pkglibexecdir = $(libexecdir)/@PACKAGE@
am__cd = CDPATH="$${ZSH_VERSION+.}$(PATH_SEPARATOR)" && cd
install_sh_DATA = $(install_sh) -c -m 644
install_sh_PROGRAM = $(install_sh) -c
@@ -33,43 +35,56 @@ POST_UNINSTALL = :
build_triplet = @build@
host_triplet = @host@
bin_PROGRAMS = xzdec$(EXEEXT) lzmadec$(EXEEXT)
-@COND_GNULIB_TRUE@am__append_1 = @top_builddir@/lib/libgnu.a
+@COND_W32_TRUE@am__append_1 = xzdec_w32res.rc
+@COND_GNULIB_TRUE@am__append_2 = $(top_builddir)/lib/libgnu.a
+@COND_W32_TRUE@am__append_3 = lzmadec_w32res.rc
subdir = src/xzdec
-DIST_COMMON = $(srcdir)/Makefile.am $(srcdir)/Makefile.in
+DIST_COMMON = $(dist_man_MANS) $(srcdir)/Makefile.am \
+ $(srcdir)/Makefile.in
ACLOCAL_M4 = $(top_srcdir)/aclocal.m4
am__aclocal_m4_deps = $(top_srcdir)/m4/acx_pthread.m4 \
$(top_srcdir)/m4/getopt.m4 $(top_srcdir)/m4/gettext.m4 \
- $(top_srcdir)/m4/iconv.m4 $(top_srcdir)/m4/lib-ld.m4 \
+ $(top_srcdir)/m4/iconv.m4 $(top_srcdir)/m4/lc_cpucores.m4 \
+ $(top_srcdir)/m4/lc_physmem.m4 $(top_srcdir)/m4/lib-ld.m4 \
$(top_srcdir)/m4/lib-link.m4 $(top_srcdir)/m4/lib-prefix.m4 \
- $(top_srcdir)/m4/nls.m4 $(top_srcdir)/m4/po.m4 \
- $(top_srcdir)/m4/progtest.m4 $(top_srcdir)/configure.ac
+ $(top_srcdir)/m4/libtool.m4 $(top_srcdir)/m4/ltoptions.m4 \
+ $(top_srcdir)/m4/ltsugar.m4 $(top_srcdir)/m4/ltversion.m4 \
+ $(top_srcdir)/m4/lt~obsolete.m4 $(top_srcdir)/m4/nls.m4 \
+ $(top_srcdir)/m4/po.m4 $(top_srcdir)/m4/posix-shell.m4 \
+ $(top_srcdir)/m4/progtest.m4 $(top_srcdir)/m4/visibility.m4 \
+ $(top_srcdir)/configure.ac
am__configure_deps = $(am__aclocal_m4_deps) $(CONFIGURE_DEPENDENCIES) \
$(ACLOCAL_M4)
mkinstalldirs = $(install_sh) -d
CONFIG_HEADER = $(top_builddir)/config.h
CONFIG_CLEAN_FILES =
-am__installdirs = "$(DESTDIR)$(bindir)"
-binPROGRAMS_INSTALL = $(INSTALL_PROGRAM)
+CONFIG_CLEAN_VPATH_FILES =
+am__installdirs = "$(DESTDIR)$(bindir)" "$(DESTDIR)$(man1dir)"
PROGRAMS = $(bin_PROGRAMS)
-am__objects_1 = lzmadec-xzdec.$(OBJEXT)
-am_lzmadec_OBJECTS = $(am__objects_1)
+am__lzmadec_SOURCES_DIST = xzdec.c lzmadec_w32res.rc
+@COND_W32_TRUE@am__objects_1 = lzmadec_w32res.$(OBJEXT)
+am_lzmadec_OBJECTS = lzmadec-xzdec.$(OBJEXT) $(am__objects_1)
lzmadec_OBJECTS = $(am_lzmadec_OBJECTS)
-am__DEPENDENCIES_1 = @top_builddir@/src/liblzma/liblzma.la \
- $(am__append_1)
-lzmadec_DEPENDENCIES = $(am__DEPENDENCIES_1)
+am__DEPENDENCIES_1 =
+am__DEPENDENCIES_2 = $(top_builddir)/src/liblzma/liblzma.la \
+ $(am__append_2) $(am__DEPENDENCIES_1)
+lzmadec_DEPENDENCIES = $(am__DEPENDENCIES_2)
lzmadec_LINK = $(LIBTOOL) --tag=CC $(AM_LIBTOOLFLAGS) $(LIBTOOLFLAGS) \
--mode=link $(CCLD) $(AM_CFLAGS) $(CFLAGS) $(lzmadec_LDFLAGS) \
$(LDFLAGS) -o $@
-am_xzdec_OBJECTS = xzdec-xzdec.$(OBJEXT)
+am__xzdec_SOURCES_DIST = xzdec.c xzdec_w32res.rc
+@COND_W32_TRUE@am__objects_2 = xzdec_w32res.$(OBJEXT)
+am_xzdec_OBJECTS = xzdec-xzdec.$(OBJEXT) $(am__objects_2)
xzdec_OBJECTS = $(am_xzdec_OBJECTS)
-xzdec_DEPENDENCIES = @top_builddir@/src/liblzma/liblzma.la \
- $(am__append_1)
+xzdec_DEPENDENCIES = $(top_builddir)/src/liblzma/liblzma.la \
+ $(am__append_2) $(am__DEPENDENCIES_1)
xzdec_LINK = $(LIBTOOL) --tag=CC $(AM_LIBTOOLFLAGS) $(LIBTOOLFLAGS) \
--mode=link $(CCLD) $(AM_CFLAGS) $(CFLAGS) $(xzdec_LDFLAGS) \
$(LDFLAGS) -o $@
DEFAULT_INCLUDES = -I.@am__isrc@ -I$(top_builddir)
-depcomp = $(SHELL) $(top_srcdir)/depcomp
+depcomp = $(SHELL) $(top_srcdir)/build-aux/depcomp
am__depfiles_maybe = depfiles
+am__mv = mv -f
COMPILE = $(CC) $(DEFS) $(DEFAULT_INCLUDES) $(INCLUDES) $(AM_CPPFLAGS) \
$(CPPFLAGS) $(AM_CFLAGS) $(CFLAGS)
LTCOMPILE = $(LIBTOOL) --tag=CC $(AM_LIBTOOLFLAGS) $(LIBTOOLFLAGS) \
@@ -80,13 +95,39 @@ LINK = $(LIBTOOL) --tag=CC $(AM_LIBTOOLFLAGS) $(LIBTOOLFLAGS) \
--mode=link $(CCLD) $(AM_CFLAGS) $(CFLAGS) $(AM_LDFLAGS) \
$(LDFLAGS) -o $@
SOURCES = $(lzmadec_SOURCES) $(xzdec_SOURCES)
-DIST_SOURCES = $(lzmadec_SOURCES) $(xzdec_SOURCES)
+DIST_SOURCES = $(am__lzmadec_SOURCES_DIST) $(am__xzdec_SOURCES_DIST)
+am__vpath_adj_setup = srcdirstrip=`echo "$(srcdir)" | sed 's|.|.|g'`;
+am__vpath_adj = case $$p in \
+ $(srcdir)/*) f=`echo "$$p" | sed "s|^$$srcdirstrip/||"`;; \
+ *) f=$$p;; \
+ esac;
+am__strip_dir = f=`echo $$p | sed -e 's|^.*/||'`;
+am__install_max = 40
+am__nobase_strip_setup = \
+ srcdirstrip=`echo "$(srcdir)" | sed 's/[].[^$$\\*|]/\\\\&/g'`
+am__nobase_strip = \
+ for p in $$list; do echo "$$p"; done | sed -e "s|$$srcdirstrip/||"
+am__nobase_list = $(am__nobase_strip_setup); \
+ for p in $$list; do echo "$$p $$p"; done | \
+ sed "s| $$srcdirstrip/| |;"' / .*\//!s/ .*/ ./; s,\( .*\)/[^/]*$$,\1,' | \
+ $(AWK) 'BEGIN { files["."] = "" } { files[$$2] = files[$$2] " " $$1; \
+ if (++n[$$2] == $(am__install_max)) \
+ { print $$2, files[$$2]; n[$$2] = 0; files[$$2] = "" } } \
+ END { for (dir in files) print dir, files[dir] }'
+am__base_list = \
+ sed '$$!N;$$!N;$$!N;$$!N;$$!N;$$!N;$$!N;s/\n/ /g' | \
+ sed '$$!N;$$!N;$$!N;$$!N;s/\n/ /g'
+man1dir = $(mandir)/man1
+NROFF = nroff
+MANS = $(dist_man_MANS)
ETAGS = etags
CTAGS = ctags
DISTFILES = $(DIST_COMMON) $(DIST_SOURCES) $(TEXINFOS) $(EXTRA_DIST)
ACLOCAL = @ACLOCAL@
AMTAR = @AMTAR@
+AM_CFLAGS = @AM_CFLAGS@
AR = @AR@
+AS = @AS@
AUTOCONF = @AUTOCONF@
AUTOHEADER = @AUTOHEADER@
AUTOMAKE = @AUTOMAKE@
@@ -100,22 +141,20 @@ CFLAGS = @CFLAGS@
CFLAG_VISIBILITY = @CFLAG_VISIBILITY@
CPP = @CPP@
CPPFLAGS = @CPPFLAGS@
-CXX = @CXX@
-CXXCPP = @CXXCPP@
-CXXDEPMODE = @CXXDEPMODE@
-CXXFLAGS = @CXXFLAGS@
CYGPATH_W = @CYGPATH_W@
DEFS = @DEFS@
DEPDIR = @DEPDIR@
+DLLTOOL = @DLLTOOL@
DSYMUTIL = @DSYMUTIL@
-ECHO = @ECHO@
+DUMPBIN = @DUMPBIN@
+DYNAMIC_CPPFLAGS = @DYNAMIC_CPPFLAGS@
+DYNAMIC_LDFLAGS = @DYNAMIC_LDFLAGS@
ECHO_C = @ECHO_C@
ECHO_N = @ECHO_N@
ECHO_T = @ECHO_T@
EGREP = @EGREP@
EXEEXT = @EXEEXT@
-F77 = @F77@
-FFLAGS = @FFLAGS@
+FGREP = @FGREP@
GETOPT_H = @GETOPT_H@
GMSGFMT = @GMSGFMT@
GMSGFMT_015 = @GMSGFMT_015@
@@ -128,12 +167,14 @@ INSTALL_SCRIPT = @INSTALL_SCRIPT@
INSTALL_STRIP_PROGRAM = @INSTALL_STRIP_PROGRAM@
INTLLIBS = @INTLLIBS@
INTL_MACOSX_LIBS = @INTL_MACOSX_LIBS@
+LD = @LD@
LDFLAGS = @LDFLAGS@
LIBICONV = @LIBICONV@
LIBINTL = @LIBINTL@
LIBOBJS = @LIBOBJS@
LIBS = @LIBS@
LIBTOOL = @LIBTOOL@
+LIPO = @LIPO@
LN_S = @LN_S@
LTLIBICONV = @LTLIBICONV@
LTLIBINTL = @LTLIBINTL@
@@ -143,23 +184,34 @@ MKDIR_P = @MKDIR_P@
MSGFMT = @MSGFMT@
MSGFMT_015 = @MSGFMT_015@
MSGMERGE = @MSGMERGE@
+NM = @NM@
NMEDIT = @NMEDIT@
+OBJDUMP = @OBJDUMP@
OBJEXT = @OBJEXT@
+OTOOL = @OTOOL@
+OTOOL64 = @OTOOL64@
PACKAGE = @PACKAGE@
PACKAGE_BUGREPORT = @PACKAGE_BUGREPORT@
+PACKAGE_HOMEPAGE = @PACKAGE_HOMEPAGE@
PACKAGE_NAME = @PACKAGE_NAME@
PACKAGE_STRING = @PACKAGE_STRING@
PACKAGE_TARNAME = @PACKAGE_TARNAME@
+PACKAGE_URL = @PACKAGE_URL@
PACKAGE_VERSION = @PACKAGE_VERSION@
PATH_SEPARATOR = @PATH_SEPARATOR@
+POSIX_SHELL = @POSIX_SHELL@
POSUB = @POSUB@
+PREFERABLY_POSIX_SHELL = @PREFERABLY_POSIX_SHELL@
PTHREAD_CC = @PTHREAD_CC@
PTHREAD_CFLAGS = @PTHREAD_CFLAGS@
PTHREAD_LIBS = @PTHREAD_LIBS@
RANLIB = @RANLIB@
+RC = @RC@
SED = @SED@
SET_MAKE = @SET_MAKE@
SHELL = @SHELL@
+STATIC_CPPFLAGS = @STATIC_CPPFLAGS@
+STATIC_LDFLAGS = @STATIC_LDFLAGS@
STRIP = @STRIP@
USE_NLS = @USE_NLS@
VERSION = @VERSION@
@@ -170,8 +222,7 @@ abs_srcdir = @abs_srcdir@
abs_top_builddir = @abs_top_builddir@
abs_top_srcdir = @abs_top_srcdir@
ac_ct_CC = @ac_ct_CC@
-ac_ct_CXX = @ac_ct_CXX@
-ac_ct_F77 = @ac_ct_F77@
+ac_ct_DUMPBIN = @ac_ct_DUMPBIN@
acx_pthread_config = @acx_pthread_config@
am__include = @am__include@
am__leading_dot = @am__leading_dot@
@@ -203,6 +254,7 @@ libdir = @libdir@
libexecdir = @libexecdir@
localedir = @localedir@
localstatedir = @localstatedir@
+lt_ECHO = @lt_ECHO@
mandir = @mandir@
mkdir_p = @mkdir_p@
oldincludedir = @oldincludedir@
@@ -218,23 +270,26 @@ target_alias = @target_alias@
top_build_prefix = @top_build_prefix@
top_builddir = @top_builddir@
top_srcdir = @top_srcdir@
-xzdec_SOURCES = xzdec.c
+xz = @xz@
+xzdec_SOURCES = xzdec.c $(am__append_1)
xzdec_CPPFLAGS = \
- -I@top_srcdir@/src/common \
- -I@top_srcdir@/src/liblzma/api \
- -I@top_builddir@/lib
-
-xzdec_LDFLAGS = -static
-xzdec_LDADD = @top_builddir@/src/liblzma/liblzma.la @LTLIBINTL@ \
- $(am__append_1)
-lzmadec_SOURCES = $(xzdec_SOURCES)
+ -I$(top_srcdir)/src/common \
+ -I$(top_srcdir)/src/liblzma/api \
+ -I$(top_builddir)/lib \
+ $(STATIC_CPPFLAGS)
+
+xzdec_LDFLAGS = $(STATIC_LDFLAGS)
+xzdec_LDADD = $(top_builddir)/src/liblzma/liblzma.la $(am__append_2) \
+ $(LTLIBINTL)
+lzmadec_SOURCES = xzdec.c $(am__append_3)
lzmadec_CPPFLAGS = $(xzdec_CPPFLAGS) -DLZMADEC
lzmadec_LDFLAGS = $(xzdec_LDFLAGS)
lzmadec_LDADD = $(xzdec_LDADD)
+dist_man_MANS = xzdec.1
all: all-am
.SUFFIXES:
-.SUFFIXES: .c .lo .o .obj
+.SUFFIXES: .c .lo .o .obj .rc
$(srcdir)/Makefile.in: $(srcdir)/Makefile.am $(am__configure_deps)
@for dep in $?; do \
case '$(am__configure_deps)' in \
@@ -244,9 +299,9 @@ $(srcdir)/Makefile.in: $(srcdir)/Makefile.am $(am__configure_deps)
exit 1;; \
esac; \
done; \
- echo ' cd $(top_srcdir) && $(AUTOMAKE) --foreign src/xzdec/Makefile'; \
- cd $(top_srcdir) && \
- $(AUTOMAKE) --foreign src/xzdec/Makefile
+ echo ' cd $(top_srcdir) && $(AUTOMAKE) --foreign src/xzdec/Makefile'; \
+ $(am__cd) $(top_srcdir) && \
+ $(AUTOMAKE) --foreign src/xzdec/Makefile
.PRECIOUS: Makefile
Makefile: $(srcdir)/Makefile.in $(top_builddir)/config.status
@case '$?' in \
@@ -264,34 +319,50 @@ $(top_srcdir)/configure: $(am__configure_deps)
cd $(top_builddir) && $(MAKE) $(AM_MAKEFLAGS) am--refresh
$(ACLOCAL_M4): $(am__aclocal_m4_deps)
cd $(top_builddir) && $(MAKE) $(AM_MAKEFLAGS) am--refresh
+$(am__aclocal_m4_deps):
install-binPROGRAMS: $(bin_PROGRAMS)
@$(NORMAL_INSTALL)
test -z "$(bindir)" || $(MKDIR_P) "$(DESTDIR)$(bindir)"
- @list='$(bin_PROGRAMS)'; for p in $$list; do \
- p1=`echo $$p|sed 's/$(EXEEXT)$$//'`; \
- if test -f $$p \
- || test -f $$p1 \
- ; then \
- f=`echo "$$p1" | sed 's,^.*/,,;$(transform);s/$$/$(EXEEXT)/'`; \
- echo " $(INSTALL_PROGRAM_ENV) $(LIBTOOL) $(AM_LIBTOOLFLAGS) $(LIBTOOLFLAGS) --mode=install $(binPROGRAMS_INSTALL) '$$p' '$(DESTDIR)$(bindir)/$$f'"; \
- $(INSTALL_PROGRAM_ENV) $(LIBTOOL) $(AM_LIBTOOLFLAGS) $(LIBTOOLFLAGS) --mode=install $(binPROGRAMS_INSTALL) "$$p" "$(DESTDIR)$(bindir)/$$f" || exit 1; \
- else :; fi; \
- done
+ @list='$(bin_PROGRAMS)'; test -n "$(bindir)" || list=; \
+ for p in $$list; do echo "$$p $$p"; done | \
+ sed 's/$(EXEEXT)$$//' | \
+ while read p p1; do if test -f $$p || test -f $$p1; \
+ then echo "$$p"; echo "$$p"; else :; fi; \
+ done | \
+ sed -e 'p;s,.*/,,;n;h' -e 's|.*|.|' \
+ -e 'p;x;s,.*/,,;s/$(EXEEXT)$$//;$(transform);s/$$/$(EXEEXT)/' | \
+ sed 'N;N;N;s,\n, ,g' | \
+ $(AWK) 'BEGIN { files["."] = ""; dirs["."] = 1 } \
+ { d=$$3; if (dirs[d] != 1) { print "d", d; dirs[d] = 1 } \
+ if ($$2 == $$4) files[d] = files[d] " " $$1; \
+ else { print "f", $$3 "/" $$4, $$1; } } \
+ END { for (d in files) print "f", d, files[d] }' | \
+ while read type dir files; do \
+ if test "$$dir" = .; then dir=; else dir=/$$dir; fi; \
+ test -z "$$files" || { \
+ echo " $(INSTALL_PROGRAM_ENV) $(LIBTOOL) $(AM_LIBTOOLFLAGS) $(LIBTOOLFLAGS) --mode=install $(INSTALL_PROGRAM) $$files '$(DESTDIR)$(bindir)$$dir'"; \
+ $(INSTALL_PROGRAM_ENV) $(LIBTOOL) $(AM_LIBTOOLFLAGS) $(LIBTOOLFLAGS) --mode=install $(INSTALL_PROGRAM) $$files "$(DESTDIR)$(bindir)$$dir" || exit $$?; \
+ } \
+ ; done
uninstall-binPROGRAMS:
@$(NORMAL_UNINSTALL)
- @list='$(bin_PROGRAMS)'; for p in $$list; do \
- f=`echo "$$p" | sed 's,^.*/,,;s/$(EXEEXT)$$//;$(transform);s/$$/$(EXEEXT)/'`; \
- echo " rm -f '$(DESTDIR)$(bindir)/$$f'"; \
- rm -f "$(DESTDIR)$(bindir)/$$f"; \
- done
+ @list='$(bin_PROGRAMS)'; test -n "$(bindir)" || list=; \
+ files=`for p in $$list; do echo "$$p"; done | \
+ sed -e 'h;s,^.*/,,;s/$(EXEEXT)$$//;$(transform)' \
+ -e 's/$$/$(EXEEXT)/' `; \
+ test -n "$$list" || exit 0; \
+ echo " ( cd '$(DESTDIR)$(bindir)' && rm -f" $$files ")"; \
+ cd "$(DESTDIR)$(bindir)" && rm -f $$files
clean-binPROGRAMS:
- @list='$(bin_PROGRAMS)'; for p in $$list; do \
- f=`echo $$p|sed 's/$(EXEEXT)$$//'`; \
- echo " rm -f $$p $$f"; \
- rm -f $$p $$f ; \
- done
+ @list='$(bin_PROGRAMS)'; test -n "$$list" || exit 0; \
+ echo " rm -f" $$list; \
+ rm -f $$list || exit $$?; \
+ test -n "$(EXEEXT)" || exit 0; \
+ list=`for p in $$list; do echo "$$p"; done | sed 's/$(EXEEXT)$$//'`; \
+ echo " rm -f" $$list; \
+ rm -f $$list
lzmadec$(EXEEXT): $(lzmadec_OBJECTS) $(lzmadec_DEPENDENCIES)
@rm -f lzmadec$(EXEEXT)
$(lzmadec_LINK) $(lzmadec_OBJECTS) $(lzmadec_LDADD) $(LIBS)
@@ -310,49 +381,49 @@ distclean-compile:
.c.o:
@am__fastdepCC_TRUE@ $(COMPILE) -MT $@ -MD -MP -MF $(DEPDIR)/$*.Tpo -c -o $@ $<
-@am__fastdepCC_TRUE@ mv -f $(DEPDIR)/$*.Tpo $(DEPDIR)/$*.Po
+@am__fastdepCC_TRUE@ $(am__mv) $(DEPDIR)/$*.Tpo $(DEPDIR)/$*.Po
@AMDEP_TRUE@@am__fastdepCC_FALSE@ source='$<' object='$@' libtool=no @AMDEPBACKSLASH@
@AMDEP_TRUE@@am__fastdepCC_FALSE@ DEPDIR=$(DEPDIR) $(CCDEPMODE) $(depcomp) @AMDEPBACKSLASH@
@am__fastdepCC_FALSE@ $(COMPILE) -c $<
.c.obj:
@am__fastdepCC_TRUE@ $(COMPILE) -MT $@ -MD -MP -MF $(DEPDIR)/$*.Tpo -c -o $@ `$(CYGPATH_W) '$<'`
-@am__fastdepCC_TRUE@ mv -f $(DEPDIR)/$*.Tpo $(DEPDIR)/$*.Po
+@am__fastdepCC_TRUE@ $(am__mv) $(DEPDIR)/$*.Tpo $(DEPDIR)/$*.Po
@AMDEP_TRUE@@am__fastdepCC_FALSE@ source='$<' object='$@' libtool=no @AMDEPBACKSLASH@
@AMDEP_TRUE@@am__fastdepCC_FALSE@ DEPDIR=$(DEPDIR) $(CCDEPMODE) $(depcomp) @AMDEPBACKSLASH@
@am__fastdepCC_FALSE@ $(COMPILE) -c `$(CYGPATH_W) '$<'`
.c.lo:
@am__fastdepCC_TRUE@ $(LTCOMPILE) -MT $@ -MD -MP -MF $(DEPDIR)/$*.Tpo -c -o $@ $<
-@am__fastdepCC_TRUE@ mv -f $(DEPDIR)/$*.Tpo $(DEPDIR)/$*.Plo
+@am__fastdepCC_TRUE@ $(am__mv) $(DEPDIR)/$*.Tpo $(DEPDIR)/$*.Plo
@AMDEP_TRUE@@am__fastdepCC_FALSE@ source='$<' object='$@' libtool=yes @AMDEPBACKSLASH@
@AMDEP_TRUE@@am__fastdepCC_FALSE@ DEPDIR=$(DEPDIR) $(CCDEPMODE) $(depcomp) @AMDEPBACKSLASH@
@am__fastdepCC_FALSE@ $(LTCOMPILE) -c -o $@ $<
lzmadec-xzdec.o: xzdec.c
@am__fastdepCC_TRUE@ $(CC) $(DEFS) $(DEFAULT_INCLUDES) $(INCLUDES) $(lzmadec_CPPFLAGS) $(CPPFLAGS) $(AM_CFLAGS) $(CFLAGS) -MT lzmadec-xzdec.o -MD -MP -MF $(DEPDIR)/lzmadec-xzdec.Tpo -c -o lzmadec-xzdec.o `test -f 'xzdec.c' || echo '$(srcdir)/'`xzdec.c
-@am__fastdepCC_TRUE@ mv -f $(DEPDIR)/lzmadec-xzdec.Tpo $(DEPDIR)/lzmadec-xzdec.Po
+@am__fastdepCC_TRUE@ $(am__mv) $(DEPDIR)/lzmadec-xzdec.Tpo $(DEPDIR)/lzmadec-xzdec.Po
@AMDEP_TRUE@@am__fastdepCC_FALSE@ source='xzdec.c' object='lzmadec-xzdec.o' libtool=no @AMDEPBACKSLASH@
@AMDEP_TRUE@@am__fastdepCC_FALSE@ DEPDIR=$(DEPDIR) $(CCDEPMODE) $(depcomp) @AMDEPBACKSLASH@
@am__fastdepCC_FALSE@ $(CC) $(DEFS) $(DEFAULT_INCLUDES) $(INCLUDES) $(lzmadec_CPPFLAGS) $(CPPFLAGS) $(AM_CFLAGS) $(CFLAGS) -c -o lzmadec-xzdec.o `test -f 'xzdec.c' || echo '$(srcdir)/'`xzdec.c
lzmadec-xzdec.obj: xzdec.c
@am__fastdepCC_TRUE@ $(CC) $(DEFS) $(DEFAULT_INCLUDES) $(INCLUDES) $(lzmadec_CPPFLAGS) $(CPPFLAGS) $(AM_CFLAGS) $(CFLAGS) -MT lzmadec-xzdec.obj -MD -MP -MF $(DEPDIR)/lzmadec-xzdec.Tpo -c -o lzmadec-xzdec.obj `if test -f 'xzdec.c'; then $(CYGPATH_W) 'xzdec.c'; else $(CYGPATH_W) '$(srcdir)/xzdec.c'; fi`
-@am__fastdepCC_TRUE@ mv -f $(DEPDIR)/lzmadec-xzdec.Tpo $(DEPDIR)/lzmadec-xzdec.Po
+@am__fastdepCC_TRUE@ $(am__mv) $(DEPDIR)/lzmadec-xzdec.Tpo $(DEPDIR)/lzmadec-xzdec.Po
@AMDEP_TRUE@@am__fastdepCC_FALSE@ source='xzdec.c' object='lzmadec-xzdec.obj' libtool=no @AMDEPBACKSLASH@
@AMDEP_TRUE@@am__fastdepCC_FALSE@ DEPDIR=$(DEPDIR) $(CCDEPMODE) $(depcomp) @AMDEPBACKSLASH@
@am__fastdepCC_FALSE@ $(CC) $(DEFS) $(DEFAULT_INCLUDES) $(INCLUDES) $(lzmadec_CPPFLAGS) $(CPPFLAGS) $(AM_CFLAGS) $(CFLAGS) -c -o lzmadec-xzdec.obj `if test -f 'xzdec.c'; then $(CYGPATH_W) 'xzdec.c'; else $(CYGPATH_W) '$(srcdir)/xzdec.c'; fi`
xzdec-xzdec.o: xzdec.c
@am__fastdepCC_TRUE@ $(CC) $(DEFS) $(DEFAULT_INCLUDES) $(INCLUDES) $(xzdec_CPPFLAGS) $(CPPFLAGS) $(AM_CFLAGS) $(CFLAGS) -MT xzdec-xzdec.o -MD -MP -MF $(DEPDIR)/xzdec-xzdec.Tpo -c -o xzdec-xzdec.o `test -f 'xzdec.c' || echo '$(srcdir)/'`xzdec.c
-@am__fastdepCC_TRUE@ mv -f $(DEPDIR)/xzdec-xzdec.Tpo $(DEPDIR)/xzdec-xzdec.Po
+@am__fastdepCC_TRUE@ $(am__mv) $(DEPDIR)/xzdec-xzdec.Tpo $(DEPDIR)/xzdec-xzdec.Po
@AMDEP_TRUE@@am__fastdepCC_FALSE@ source='xzdec.c' object='xzdec-xzdec.o' libtool=no @AMDEPBACKSLASH@
@AMDEP_TRUE@@am__fastdepCC_FALSE@ DEPDIR=$(DEPDIR) $(CCDEPMODE) $(depcomp) @AMDEPBACKSLASH@
@am__fastdepCC_FALSE@ $(CC) $(DEFS) $(DEFAULT_INCLUDES) $(INCLUDES) $(xzdec_CPPFLAGS) $(CPPFLAGS) $(AM_CFLAGS) $(CFLAGS) -c -o xzdec-xzdec.o `test -f 'xzdec.c' || echo '$(srcdir)/'`xzdec.c
xzdec-xzdec.obj: xzdec.c
@am__fastdepCC_TRUE@ $(CC) $(DEFS) $(DEFAULT_INCLUDES) $(INCLUDES) $(xzdec_CPPFLAGS) $(CPPFLAGS) $(AM_CFLAGS) $(CFLAGS) -MT xzdec-xzdec.obj -MD -MP -MF $(DEPDIR)/xzdec-xzdec.Tpo -c -o xzdec-xzdec.obj `if test -f 'xzdec.c'; then $(CYGPATH_W) 'xzdec.c'; else $(CYGPATH_W) '$(srcdir)/xzdec.c'; fi`
-@am__fastdepCC_TRUE@ mv -f $(DEPDIR)/xzdec-xzdec.Tpo $(DEPDIR)/xzdec-xzdec.Po
+@am__fastdepCC_TRUE@ $(am__mv) $(DEPDIR)/xzdec-xzdec.Tpo $(DEPDIR)/xzdec-xzdec.Po
@AMDEP_TRUE@@am__fastdepCC_FALSE@ source='xzdec.c' object='xzdec-xzdec.obj' libtool=no @AMDEPBACKSLASH@
@AMDEP_TRUE@@am__fastdepCC_FALSE@ DEPDIR=$(DEPDIR) $(CCDEPMODE) $(depcomp) @AMDEPBACKSLASH@
@am__fastdepCC_FALSE@ $(CC) $(DEFS) $(DEFAULT_INCLUDES) $(INCLUDES) $(xzdec_CPPFLAGS) $(CPPFLAGS) $(AM_CFLAGS) $(CFLAGS) -c -o xzdec-xzdec.obj `if test -f 'xzdec.c'; then $(CYGPATH_W) 'xzdec.c'; else $(CYGPATH_W) '$(srcdir)/xzdec.c'; fi`
@@ -362,6 +433,44 @@ mostlyclean-libtool:
clean-libtool:
-rm -rf .libs _libs
+install-man1: $(dist_man_MANS)
+ @$(NORMAL_INSTALL)
+ test -z "$(man1dir)" || $(MKDIR_P) "$(DESTDIR)$(man1dir)"
+ @list=''; test -n "$(man1dir)" || exit 0; \
+ { for i in $$list; do echo "$$i"; done; \
+ l2='$(dist_man_MANS)'; for i in $$l2; do echo "$$i"; done | \
+ sed -n '/\.1[a-z]*$$/p'; \
+ } | while read p; do \
+ if test -f $$p; then d=; else d="$(srcdir)/"; fi; \
+ echo "$$d$$p"; echo "$$p"; \
+ done | \
+ sed -e 'n;s,.*/,,;p;h;s,.*\.,,;s,^[^1][0-9a-z]*$$,1,;x' \
+ -e 's,\.[0-9a-z]*$$,,;$(transform);G;s,\n,.,' | \
+ sed 'N;N;s,\n, ,g' | { \
+ list=; while read file base inst; do \
+ if test "$$base" = "$$inst"; then list="$$list $$file"; else \
+ echo " $(INSTALL_DATA) '$$file' '$(DESTDIR)$(man1dir)/$$inst'"; \
+ $(INSTALL_DATA) "$$file" "$(DESTDIR)$(man1dir)/$$inst" || exit $$?; \
+ fi; \
+ done; \
+ for i in $$list; do echo "$$i"; done | $(am__base_list) | \
+ while read files; do \
+ test -z "$$files" || { \
+ echo " $(INSTALL_DATA) $$files '$(DESTDIR)$(man1dir)'"; \
+ $(INSTALL_DATA) $$files "$(DESTDIR)$(man1dir)" || exit $$?; }; \
+ done; }
+
+uninstall-man1:
+ @$(NORMAL_UNINSTALL)
+ @list=''; test -n "$(man1dir)" || exit 0; \
+ files=`{ for i in $$list; do echo "$$i"; done; \
+ l2='$(dist_man_MANS)'; for i in $$l2; do echo "$$i"; done | \
+ sed -n '/\.1[a-z]*$$/p'; \
+ } | sed -e 's,.*/,,;h;s,.*\.,,;s,^[^1][0-9a-z]*$$,1,;x' \
+ -e 's,\.[0-9a-z]*$$,,;$(transform);G;s,\n,.,'`; \
+ test -z "$$files" || { \
+ echo " ( cd '$(DESTDIR)$(man1dir)' && rm -f" $$files ")"; \
+ cd "$(DESTDIR)$(man1dir)" && rm -f $$files; }
ID: $(HEADERS) $(SOURCES) $(LISP) $(TAGS_FILES)
list='$(SOURCES) $(HEADERS) $(LISP) $(TAGS_FILES)'; \
@@ -375,7 +484,7 @@ tags: TAGS
TAGS: $(HEADERS) $(SOURCES) $(TAGS_DEPENDENCIES) \
$(TAGS_FILES) $(LISP)
- tags=; \
+ set x; \
here=`pwd`; \
list='$(SOURCES) $(HEADERS) $(LISP) $(TAGS_FILES)'; \
unique=`for i in $$list; do \
@@ -383,34 +492,52 @@ TAGS: $(HEADERS) $(SOURCES) $(TAGS_DEPENDENCIES) \
done | \
$(AWK) '{ files[$$0] = 1; nonempty = 1; } \
END { if (nonempty) { for (i in files) print i; }; }'`; \
- if test -z "$(ETAGS_ARGS)$$tags$$unique"; then :; else \
+ shift; \
+ if test -z "$(ETAGS_ARGS)$$*$$unique"; then :; else \
test -n "$$unique" || unique=$$empty_fix; \
- $(ETAGS) $(ETAGSFLAGS) $(AM_ETAGSFLAGS) $(ETAGS_ARGS) \
- $$tags $$unique; \
+ if test $$# -gt 0; then \
+ $(ETAGS) $(ETAGSFLAGS) $(AM_ETAGSFLAGS) $(ETAGS_ARGS) \
+ "$$@" $$unique; \
+ else \
+ $(ETAGS) $(ETAGSFLAGS) $(AM_ETAGSFLAGS) $(ETAGS_ARGS) \
+ $$unique; \
+ fi; \
fi
ctags: CTAGS
CTAGS: $(HEADERS) $(SOURCES) $(TAGS_DEPENDENCIES) \
$(TAGS_FILES) $(LISP)
- tags=; \
list='$(SOURCES) $(HEADERS) $(LISP) $(TAGS_FILES)'; \
unique=`for i in $$list; do \
if test -f "$$i"; then echo $$i; else echo $(srcdir)/$$i; fi; \
done | \
$(AWK) '{ files[$$0] = 1; nonempty = 1; } \
END { if (nonempty) { for (i in files) print i; }; }'`; \
- test -z "$(CTAGS_ARGS)$$tags$$unique" \
+ test -z "$(CTAGS_ARGS)$$unique" \
|| $(CTAGS) $(CTAGSFLAGS) $(AM_CTAGSFLAGS) $(CTAGS_ARGS) \
- $$tags $$unique
+ $$unique
GTAGS:
here=`$(am__cd) $(top_builddir) && pwd` \
- && cd $(top_srcdir) \
- && gtags -i $(GTAGS_ARGS) $$here
+ && $(am__cd) $(top_srcdir) \
+ && gtags -i $(GTAGS_ARGS) "$$here"
distclean-tags:
-rm -f TAGS ID GTAGS GRTAGS GSYMS GPATH tags
distdir: $(DISTFILES)
+ @list='$(MANS)'; if test -n "$$list"; then \
+ list=`for p in $$list; do \
+ if test -f $$p; then d=; else d="$(srcdir)/"; fi; \
+ if test -f "$$d$$p"; then echo "$$d$$p"; else :; fi; done`; \
+ if test -n "$$list" && \
+ grep 'ab help2man is required to generate this page' $$list >/dev/null; then \
+ echo "error: found man pages containing the \`missing help2man' replacement text:" >&2; \
+ grep -l 'ab help2man is required to generate this page' $$list | sed 's/^/ /' >&2; \
+ echo " to fix them, install help2man, remove and regenerate the man pages;" >&2; \
+ echo " typically \`make maintainer-clean' will remove them" >&2; \
+ exit 1; \
+ else :; fi; \
+ else :; fi
@srcdirstrip=`echo "$(srcdir)" | sed 's/[].[^$$\\*]/\\\\&/g'`; \
topsrcdirstrip=`echo "$(top_srcdir)" | sed 's/[].[^$$\\*]/\\\\&/g'`; \
list='$(DISTFILES)'; \
@@ -426,21 +553,25 @@ distdir: $(DISTFILES)
if test -f $$file || test -d $$file; then d=.; else d=$(srcdir); fi; \
if test -d $$d/$$file; then \
dir=`echo "/$$file" | sed -e 's,/[^/]*$$,,'`; \
+ if test -d "$(distdir)/$$file"; then \
+ find "$(distdir)/$$file" -type d ! -perm -700 -exec chmod u+rwx {} \;; \
+ fi; \
if test -d $(srcdir)/$$file && test $$d != $(srcdir); then \
- cp -pR $(srcdir)/$$file $(distdir)$$dir || exit 1; \
+ cp -fpR $(srcdir)/$$file "$(distdir)$$dir" || exit 1; \
+ find "$(distdir)/$$file" -type d ! -perm -700 -exec chmod u+rwx {} \;; \
fi; \
- cp -pR $$d/$$file $(distdir)$$dir || exit 1; \
+ cp -fpR $$d/$$file "$(distdir)$$dir" || exit 1; \
else \
- test -f $(distdir)/$$file \
- || cp -p $$d/$$file $(distdir)/$$file \
+ test -f "$(distdir)/$$file" \
+ || cp -p $$d/$$file "$(distdir)/$$file" \
|| exit 1; \
fi; \
done
check-am: all-am
check: check-am
-all-am: Makefile $(PROGRAMS)
+all-am: Makefile $(PROGRAMS) $(MANS)
installdirs:
- for dir in "$(DESTDIR)$(bindir)"; do \
+ for dir in "$(DESTDIR)$(bindir)" "$(DESTDIR)$(man1dir)"; do \
test -z "$$dir" || $(MKDIR_P) "$$dir"; \
done
install: install-am
@@ -463,6 +594,7 @@ clean-generic:
distclean-generic:
-test -z "$(CONFIG_CLEAN_FILES)" || rm -f $(CONFIG_CLEAN_FILES)
+ -test . = "$(srcdir)" || test -z "$(CONFIG_CLEAN_VPATH_FILES)" || rm -f $(CONFIG_CLEAN_VPATH_FILES)
maintainer-clean-generic:
@echo "This command is intended for maintainers to use"
@@ -483,26 +615,39 @@ dvi-am:
html: html-am
+html-am:
+
info: info-am
info-am:
-install-data-am:
-
+install-data-am: install-man
+ @$(NORMAL_INSTALL)
+ $(MAKE) $(AM_MAKEFLAGS) install-data-hook
install-dvi: install-dvi-am
+install-dvi-am:
+
install-exec-am: install-binPROGRAMS
install-html: install-html-am
+install-html-am:
+
install-info: install-info-am
-install-man:
+install-info-am:
+
+install-man: install-man1
install-pdf: install-pdf-am
+install-pdf-am:
+
install-ps: install-ps-am
+install-ps-am:
+
installcheck-am:
maintainer-clean: maintainer-clean-am
@@ -523,23 +668,46 @@ ps: ps-am
ps-am:
-uninstall-am: uninstall-binPROGRAMS
+uninstall-am: uninstall-binPROGRAMS uninstall-man
+ @$(NORMAL_INSTALL)
+ $(MAKE) $(AM_MAKEFLAGS) uninstall-hook
+uninstall-man: uninstall-man1
-.MAKE: install-am install-strip
+.MAKE: install-am install-data-am install-strip uninstall-am
.PHONY: CTAGS GTAGS all all-am check check-am clean clean-binPROGRAMS \
clean-generic clean-libtool ctags distclean distclean-compile \
distclean-generic distclean-libtool distclean-tags distdir dvi \
dvi-am html html-am info info-am install install-am \
- install-binPROGRAMS install-data install-data-am install-dvi \
- install-dvi-am install-exec install-exec-am install-html \
- install-html-am install-info install-info-am install-man \
- install-pdf install-pdf-am install-ps install-ps-am \
- install-strip installcheck installcheck-am installdirs \
- maintainer-clean maintainer-clean-generic mostlyclean \
- mostlyclean-compile mostlyclean-generic mostlyclean-libtool \
- pdf pdf-am ps ps-am tags uninstall uninstall-am \
- uninstall-binPROGRAMS
+ install-binPROGRAMS install-data install-data-am \
+ install-data-hook install-dvi install-dvi-am install-exec \
+ install-exec-am install-html install-html-am install-info \
+ install-info-am install-man install-man1 install-pdf \
+ install-pdf-am install-ps install-ps-am install-strip \
+ installcheck installcheck-am installdirs maintainer-clean \
+ maintainer-clean-generic mostlyclean mostlyclean-compile \
+ mostlyclean-generic mostlyclean-libtool pdf pdf-am ps ps-am \
+ tags uninstall uninstall-am uninstall-binPROGRAMS \
+ uninstall-hook uninstall-man uninstall-man1
+
+
+# Windows resource compiler support. It's fine to use xz_CPPFLAGS
+# also for lzmadec.
+.rc.o:
+ $(RC) $(DEFS) $(DEFAULT_INCLUDES) $(INCLUDES) \
+ $(xzdec_CPPFLAGS) $(CPPFLAGS) $(RCFLAGS) -i $< -o $@
+
+install-data-hook:
+ cd $(DESTDIR)$(mandir)/man1 && \
+ target=`echo xzdec | sed '$(transform)'` && \
+ link=`echo lzmadec | sed '$(transform)'` && \
+ rm -f $$link.1 && \
+ $(LN_S) $$target.1 $$link.1
+
+uninstall-hook:
+ cd $(DESTDIR)$(mandir)/man1 && \
+ link=`echo lzmadec | sed '$(transform)'` && \
+ rm -f $$link.1
# Tell versions [3.59,3.63) of GNU make to not export all variables.
# Otherwise a system limit (for SysV at least) may be exceeded.
diff --git a/Build/source/utils/xz-4.999.9beta/src/xzdec/lzmadec_w32res.rc b/Build/source/utils/xz-4.999.9beta/src/xzdec/lzmadec_w32res.rc
new file mode 100644
index 00000000000..7d90e420541
--- /dev/null
+++ b/Build/source/utils/xz-4.999.9beta/src/xzdec/lzmadec_w32res.rc
@@ -0,0 +1,5 @@
+#define MY_TYPE VFT_APP
+#define MY_NAME "lzmadec"
+#define MY_SUFFIX ".exe"
+#define MY_DESC "lzmadec uncompression tool for .lzma files"
+#include "common_w32res.rc"
diff --git a/Build/source/utils/xz-4.999.9beta/src/xzdec/xzdec.1 b/Build/source/utils/xz-4.999.9beta/src/xzdec/xzdec.1
new file mode 100644
index 00000000000..442a19ece12
--- /dev/null
+++ b/Build/source/utils/xz-4.999.9beta/src/xzdec/xzdec.1
@@ -0,0 +1,168 @@
+.\"
+.\" Author: Lasse Collin
+.\"
+.\" This file has been put into the public domain.
+.\" You can do whatever you want with this file.
+.\"
+.TH XZDEC 1 "2009-06-04" "Tukaani" "XZ Utils"
+.SH NAME
+xzdec, lzmadec \- Small .xz and .lzma decompressors
+.SH SYNOPSIS
+.B xzdec
+.RI [ option ]...
+.RI [ file ]...
+.br
+.B lzmadec
+.RI [ option ]...
+.RI [ file ]...
+.SH DESCRIPTION
+.B xzdec
+is a liblzma-based decompression-only tool for
+.B .xz
+(and only
+.BR .xz )
+files.
+.B xzdec
+is intended to work as a drop-in replacement for
+.BR xz (1)
+in the most common situations where a script has been written to use
+.B "xz \-\-decompress \-\-stdout"
+(and possibly a few other commonly used options) to decompress
+.B .xz
+files.
+.B lzmadec
+is identical to
+.B xzdec
+except that
+.B lzmadec
+supports
+.B .lzma
+files instead of
+.B .xz
+files.
+.PP
+To reduce the size of the executable,
+.B xzdec
+doesn't support multithreading or localization, and doesn't read options from
+.B XZ_OPT
+environment variable.
+.B xzdec
+doesn't support displaying intermediate progress information: sending
+.B SIGINFO
+to
+.B xzdec
+does nothing, but sending
+.B SIGUSR1
+terminates the process instead of displaying progress information.
+.SH OPTIONS
+.TP
+.BR \-d ", " \-\-decompress ", " \-\-uncompress
+Ignored for
+.BR xz (1)
+compatibility.
+.B xzdec
+supports only decompression.
+.TP
+.BR \-k ", " \-\-keep
+Ignored for
+.BR xz (1)
+compatibility.
+.B xzdec
+never creates or removes any files.
+.TP
+.BR \-c ", " \-\-stdout ", " \-\-to-stdout
+Ignored for
+.BR xz (1)
+compatibility.
+.B xzdec
+always writes the decompressed data to standard output.
+.TP
+\fB\-M\fR \fIlimit\fR, \fB\-\-memory=\fIlimit
+Set the memory usage
+.IR limit .
+If this option is specified multiple times, the last one takes effect. The
+.I limit
+can be specified in multiple ways:
+.RS
+.IP \(bu 3
+The
+.I limit
+can be an absolute value in bytes. Using an integer suffix like
+.B MiB
+can be useful. Example:
+.B "\-\-memory=80MiB"
+.IP \(bu 3
+The
+.I limit
+can be specified as a percentage of physical RAM. Example:
+.B "\-\-memory=70%"
+.IP \(bu 3
+The
+.I limit
+can be reset back to its default value (currently 40 % of physical RAM)
+by setting it to
+.BR 0 .
+.IP \(bu 3
+The memory usage limiting can be effectively disabled by setting
+.I limit
+to
+.BR max .
+This isn't recommended. It's usually better to use, for example,
+.BR \-\-memory=90% .
+.RE
+.IP
+The current
+.I limit
+can be seen near the bottom of the output of the
+.B \-\-help
+option.
+.TP
+.BR \-q ", " \-\-quiet
+Specifying this once does nothing since
+.B xzdec
+never displays any warnings or notices.
+Specify this twice to suppress errors.
+.TP
+.BR \-Q ", " \-\-no-warn
+Ignored for
+.BR xz (1)
+compatibility.
+.B xzdec
+never uses the exit status
+.BR "2" .
+.TP
+.BR \-h ", " \-\-help
+Display a help message and exit successfully.
+.TP
+.BR \-V ", " \-\-version
+Display the version number of
+.B xzdec
+and liblzma.
+.SH "EXIT STATUS"
+.TP
+.B 0
+All was good.
+.TP
+.B 1
+An error occurred.
+.PP
+.B xzdec
+doesn't have any warning messages like
+.BR xz (1)
+has, thus the exit status
+.B 2
+is not used by
+.BR xzdec .
+.SH NOTES
+.B xzdec
+and
+.B lzmadec
+are not really that small. The size can be reduced further by dropping
+features from liblzma at compile time, but that shouldn't usually be done
+for executables distributed in typical non-embedded operating system
+distributions. If you need a truly small
+.B .xz
+decompressor, consider using XZ Embedded.
+.\" TODO: Provide URL to XZ Embedded.
+.SH "SEE ALSO"
+.BR xz (1)
diff --git a/Build/source/utils/xz-4.999.8beta/src/xzdec/xzdec.c b/Build/source/utils/xz-4.999.9beta/src/xzdec/xzdec.c
index c17b5790948..e99934f535c 100644
--- a/Build/source/utils/xz-4.999.8beta/src/xzdec/xzdec.c
+++ b/Build/source/utils/xz-4.999.9beta/src/xzdec/xzdec.c
@@ -3,29 +3,24 @@
/// \file xzdec.c
/// \brief Simple single-threaded tool to uncompress .xz or .lzma files
//
-// Copyright (C) 2007 Lasse Collin
+// Author: Lasse Collin
//
-// This program is free software; you can redistribute it and/or
-// modify it under the terms of the GNU Lesser General Public
-// License as published by the Free Software Foundation; either
-// version 2.1 of the License, or (at your option) any later version.
-//
-// This program is distributed in the hope that it will be useful,
-// but WITHOUT ANY WARRANTY; without even the implied warranty of
-// MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the GNU
-// Lesser General Public License for more details.
+// This file has been put into the public domain.
+// You can do whatever you want with this file.
//
///////////////////////////////////////////////////////////////////////////////
#include "sysdefs.h"
#include "lzma.h"
+#include <stdarg.h>
#include <errno.h>
#include <stdio.h>
#include <unistd.h>
-#ifdef _WIN32
+#ifdef DOSLIKE
# include <fcntl.h>
+# include <io.h>
#endif
#include "getopt.h"
@@ -42,10 +37,31 @@
/// Number of bytes to use memory at maximum
static uint64_t memlimit;
+/// Error messages are suppressed if this is zero, which is the case when
+/// --quiet has been given at least twice.
+static unsigned int display_errors = 2;
+
/// Program name to be shown in error messages
static const char *argv0;
+static void lzma_attribute((format(printf, 1, 2)))
+my_errorf(const char *fmt, ...)
+{
+ va_list ap;
+ va_start(ap, fmt);
+
+ if (display_errors) {
+ fprintf(stderr, "%s: ", argv0);
+ vfprintf(stderr, fmt, ap);
+ fprintf(stderr, "\n");
+ }
+
+ va_end(ap);
+ return;
+}
+
+
static void lzma_attribute((noreturn))
my_exit(void)
{
@@ -60,9 +76,8 @@ my_exit(void)
// If it was fclose() that failed, we have the reason
// in errno. If only ferror() indicated an error,
// we have no idea what the reason was.
- fprintf(stderr, "%s: Cannot write to standard output: %s\n",
- argv0, fclose_err
- ? strerror(errno) : "Unknown error");
+ my_errorf("Writing to standard output failed: %s", fclose_err
+ ? strerror(errno) : "Unknown error");
status = EXIT_FAILURE;
}
@@ -80,19 +95,20 @@ help(void)
" -c, --stdout (ignored)\n"
" -d, --decompress (ignored)\n"
" -k, --keep (ignored)\n"
-" -f, --force (ignored)\n"
-" -M, --memory=NUM use NUM bytes of memory at maximum (0 means default);\n"
-" the suffixes k, M, G, Ki, Mi, and Gi are supported.\n"
+" -M, --memory=NUM use NUM bytes of memory at maximum (0 means default)\n"
+" -q, --quiet specify *twice* to suppress errors\n"
+" -Q, --no-warn (ignored)\n"
" -h, --help display this help and exit\n"
-" -V, --version display version and license information and exit\n"
+" -V, --version display the version number and exit\n"
"\n"
"With no FILE, or when FILE is -, read standard input.\n"
"\n"
-"On this configuration, the tool will use about %" PRIu64
- " MiB of memory at maximum.\n"
+"On this system and configuration, this program will use at maximum of roughly\n"
+"%" PRIu64 " MiB RAM.\n"
"\n"
-"Report bugs to <" PACKAGE_BUGREPORT "> (in English or Finnish).\n",
- argv0, (memlimit + 512 * 1024) / (1024 * 1024));
+"Report bugs to <" PACKAGE_BUGREPORT "> (in English or Finnish).\n"
+PACKAGE_NAME " home page: <" PACKAGE_HOMEPAGE ">\n",
+ argv0, memlimit / (1024 * 1024));
my_exit();
}
@@ -100,42 +116,61 @@ help(void)
static void lzma_attribute((noreturn))
version(void)
{
- printf(TOOL_FORMAT "dec " PACKAGE_VERSION "\n"
+ printf(TOOL_FORMAT "dec (" PACKAGE_NAME ") " LZMA_VERSION_STRING "\n"
"liblzma %s\n", lzma_version_string());
my_exit();
}
-/// Finds out the amount of physical memory in the system, and sets
-/// a default memory usage limit.
+/// Find out the amount of physical memory (RAM) in the system, and set
+/// the memory usage limit to the given percentage of RAM.
static void
-set_default_memlimit(void)
+memlimit_set_percentage(uint32_t percentage)
{
- const uint64_t mem = physmem();
+ uint64_t mem = physmem();
+ // If we cannot determine the amount of RAM, assume 32 MiB.
if (mem == 0)
- // Cannot autodetect, use 10 MiB as the default limit.
- memlimit = (1U << 23) + (1U << 21);
+ mem = UINT64_C(32) * 1024 * 1024;
+
+ memlimit = percentage * mem / 100;
+ return;
+}
+
+
+/// Set the memory usage limit to give number of bytes. Zero is a special
+/// value to indicate the default limit.
+static void
+memlimit_set(uint64_t new_memlimit)
+{
+ if (new_memlimit == 0)
+ memlimit_set_percentage(40);
else
- // Limit is 33 % of RAM.
- memlimit = mem / 3;
+ memlimit = new_memlimit;
return;
}
-/// \brief Converts a string to uint64_t
+/// \brief Convert a string to uint64_t
///
/// This is rudely copied from src/xz/util.c and modified a little. :-(
///
+/// \param max Return value when the string "max" was specified.
+///
static uint64_t
-str_to_uint64(const char *value)
+str_to_uint64(const char *value, uint64_t max)
{
uint64_t result = 0;
+ // Accept special value "max".
+ if (strcmp(value, "max") == 0)
+ return max;
+
if (*value < '0' || *value > '9') {
- fprintf(stderr, "%s: %s: Not a number\n", argv0, value);
+ my_errorf("%s: Value is not a non-negative decimal integer",
+ value);
exit(EXIT_FAILURE);
}
@@ -178,8 +213,7 @@ str_to_uint64(const char *value)
}
if (multiplier == 0) {
- fprintf(stderr, "%s: %s: Invalid suffix\n",
- argv0, value);
+ my_errorf("%s: Invalid suffix", value);
exit(EXIT_FAILURE);
}
@@ -198,15 +232,16 @@ str_to_uint64(const char *value)
static void
parse_options(int argc, char **argv)
{
- static const char short_opts[] = "cdkfM:hV";
+ static const char short_opts[] = "cdkM:hqQV";
static const struct option long_opts[] = {
{ "stdout", no_argument, NULL, 'c' },
{ "to-stdout", no_argument, NULL, 'c' },
{ "decompress", no_argument, NULL, 'd' },
{ "uncompress", no_argument, NULL, 'd' },
- { "force", no_argument, NULL, 'f' },
{ "keep", no_argument, NULL, 'k' },
{ "memory", required_argument, NULL, 'M' },
+ { "quiet", no_argument, NULL, 'q' },
+ { "no-warn", no_argument, NULL, 'Q' },
{ "help", no_argument, NULL, 'h' },
{ "version", no_argument, NULL, 'V' },
{ NULL, 0, NULL, 0 }
@@ -219,14 +254,38 @@ parse_options(int argc, char **argv)
switch (c) {
case 'c':
case 'd':
- case 'f':
case 'k':
+ case 'Q':
break;
- case 'M':
- memlimit = str_to_uint64(optarg);
- if (memlimit == 0)
- set_default_memlimit();
+ case 'M': {
+ // Support specifying the limit as a percentage of
+ // installed physical RAM.
+ const size_t len = strlen(optarg);
+ if (len > 0 && optarg[len - 1] == '%') {
+ // Memory limit is a percentage of total
+ // installed RAM.
+ optarg[len - 1] = '\0';
+ const uint64_t percentage
+ = str_to_uint64(optarg, 100);
+ if (percentage < 1 || percentage > 100) {
+ my_errorf("Percentage must be in "
+ "the range [1, 100]");
+ exit(EXIT_FAILURE);
+ }
+
+ memlimit_set_percentage(percentage);
+ } else {
+ memlimit_set(str_to_uint64(
+ optarg, UINT64_MAX));
+ }
+
+ break;
+ }
+
+ case 'q':
+ if (display_errors > 0)
+ --display_errors;
break;
@@ -260,13 +319,8 @@ uncompress(lzma_stream *strm, FILE *file, const char *filename)
// The only reasonable error here is LZMA_MEM_ERROR.
// FIXME: Maybe also LZMA_MEMLIMIT_ERROR in future?
if (ret != LZMA_OK) {
- fprintf(stderr, "%s: ", argv0);
-
- if (ret == LZMA_MEM_ERROR)
- fprintf(stderr, "%s\n", strerror(ENOMEM));
- else
- fprintf(stderr, "Internal program error (bug)\n");
-
+ my_errorf("%s", ret == LZMA_MEM_ERROR ? strerror(ENOMEM)
+ : "Internal error (bug)");
exit(EXIT_FAILURE);
}
@@ -289,10 +343,8 @@ uncompress(lzma_stream *strm, FILE *file, const char *filename)
// POSIX says that fread() sets errno if
// an error occurred. ferror() doesn't
// touch errno.
- fprintf(stderr, "%s: %s: Error reading "
- "input file: %s\n",
- argv0, filename,
- strerror(errno));
+ my_errorf("%s: Error reading input file: %s",
+ filename, strerror(errno));
exit(EXIT_FAILURE);
}
@@ -317,9 +369,8 @@ uncompress(lzma_stream *strm, FILE *file, const char *filename)
// Wouldn't be a surprise if writing to stderr
// would fail too but at least try to show an
// error message.
- fprintf(stderr, "%s: Cannot write to "
- "standard output: %s\n", argv0,
- strerror(errno));
+ my_errorf("Cannot write to standard output: "
+ "%s", strerror(errno));
exit(EXIT_FAILURE);
}
@@ -376,12 +427,11 @@ uncompress(lzma_stream *strm, FILE *file, const char *filename)
break;
default:
- msg = "Internal program error (bug)";
+ msg = "Internal error (bug)";
break;
}
- fprintf(stderr, "%s: %s: %s\n", argv0, filename, msg);
-
+ my_errorf("%s: %s", filename, msg);
exit(EXIT_FAILURE);
}
}
@@ -395,9 +445,9 @@ main(int argc, char **argv)
// error and help messages.
argv0 = argv[0];
- // Detect amount of installed RAM and set the memory usage limit.
- // This is needed before parsing the command line arguments.
- set_default_memlimit();
+ // Set the default memory usage limit. This is needed before parsing
+ // the command line arguments.
+ memlimit_set(0);
// Parse the command line options.
parse_options(argc, argv);
@@ -408,7 +458,7 @@ main(int argc, char **argv)
lzma_stream strm = LZMA_STREAM_INIT;
// Some systems require setting stdin and stdout to binary mode.
-#ifdef _WIN32
+#ifdef DOSLIKE
setmode(fileno(stdin), O_BINARY);
setmode(fileno(stdout), O_BINARY);
#endif
@@ -425,8 +475,7 @@ main(int argc, char **argv)
} else {
FILE *file = fopen(argv[optind], "rb");
if (file == NULL) {
- fprintf(stderr, "%s: %s: %s\n",
- argv0, argv[optind],
+ my_errorf("%s: %s", argv[optind],
strerror(errno));
exit(EXIT_FAILURE);
}
diff --git a/Build/source/utils/xz-4.999.9beta/src/xzdec/xzdec_w32res.rc b/Build/source/utils/xz-4.999.9beta/src/xzdec/xzdec_w32res.rc
new file mode 100644
index 00000000000..626f26cea87
--- /dev/null
+++ b/Build/source/utils/xz-4.999.9beta/src/xzdec/xzdec_w32res.rc
@@ -0,0 +1,12 @@
+/*
+ * Author: Lasse Collin
+ *
+ * This file has been put into the public domain.
+ * You can do whatever you want with this file.
+ */
+
+#define MY_TYPE VFT_APP
+#define MY_NAME "xzdec"
+#define MY_SUFFIX ".exe"
+#define MY_DESC "xzdec uncompression tool for .xz files"
+#include "common_w32res.rc"
diff --git a/Build/source/utils/xz-4.999.9beta/tests/Makefile.am b/Build/source/utils/xz-4.999.9beta/tests/Makefile.am
new file mode 100644
index 00000000000..d01787a37ad
--- /dev/null
+++ b/Build/source/utils/xz-4.999.9beta/tests/Makefile.am
@@ -0,0 +1,51 @@
+##
+## Author: Lasse Collin
+##
+## This file has been put into the public domain.
+## You can do whatever you want with this file.
+##
+
+EXTRA_DIST = \
+ files \
+ tests.h \
+ test_files.sh \
+ test_compress.sh \
+ bcj_test.c \
+ compress_prepared_bcj_sparc \
+ compress_prepared_bcj_x86
+
+AM_CPPFLAGS = \
+ -I$(top_srcdir)/src/common \
+ -I$(top_srcdir)/src/liblzma/api \
+ -I$(top_builddir)/lib \
+ $(STATIC_CPPFLAGS)
+
+AM_LDFLAGS = $(STATIC_LDFLAGS)
+
+LDADD = $(top_builddir)/src/liblzma/liblzma.la
+
+if COND_GNULIB
+LDADD += $(top_builddir)/lib/libgnu.a
+endif
+
+LDADD += $(LTLIBINTL)
+
+check_PROGRAMS = \
+ create_compress_files \
+ test_check \
+ test_stream_flags \
+ test_filter_flags \
+ test_block_header \
+ test_index
+
+TESTS = \
+ test_check \
+ test_stream_flags \
+ test_filter_flags \
+ test_block_header \
+ test_index \
+ test_files.sh \
+ test_compress.sh
+
+clean-local:
+ -rm -f compress_generated_*
diff --git a/Build/source/utils/xz-4.999.8beta/tests/Makefile.in b/Build/source/utils/xz-4.999.9beta/tests/Makefile.in
index 7b51c37ff29..d4a018ecac3 100644
--- a/Build/source/utils/xz-4.999.8beta/tests/Makefile.in
+++ b/Build/source/utils/xz-4.999.9beta/tests/Makefile.in
@@ -1,8 +1,9 @@
-# Makefile.in generated by automake 1.10.2 from Makefile.am.
+# Makefile.in generated by automake 1.11 from Makefile.am.
# @configure_input@
# Copyright (C) 1994, 1995, 1996, 1997, 1998, 1999, 2000, 2001, 2002,
-# 2003, 2004, 2005, 2006, 2007, 2008 Free Software Foundation, Inc.
+# 2003, 2004, 2005, 2006, 2007, 2008, 2009 Free Software Foundation,
+# Inc.
# This Makefile.in is free software; the Free Software Foundation
# gives unlimited permission to copy and/or distribute it,
# with or without modifications, as long as this notice is preserved.
@@ -15,8 +16,9 @@
@SET_MAKE@
VPATH = @srcdir@
pkgdatadir = $(datadir)/@PACKAGE@
-pkglibdir = $(libdir)/@PACKAGE@
pkgincludedir = $(includedir)/@PACKAGE@
+pkglibdir = $(libdir)/@PACKAGE@
+pkglibexecdir = $(libexecdir)/@PACKAGE@
am__cd = CDPATH="$${ZSH_VERSION+.}$(PATH_SEPARATOR)" && cd
install_sh_DATA = $(install_sh) -c -m 644
install_sh_PROGRAM = $(install_sh) -c
@@ -31,7 +33,7 @@ PRE_UNINSTALL = :
POST_UNINSTALL = :
build_triplet = @build@
host_triplet = @host@
-@COND_GNULIB_TRUE@am__append_1 = @top_builddir@/lib/libgnu.a
+@COND_GNULIB_TRUE@am__append_1 = $(top_builddir)/lib/libgnu.a
check_PROGRAMS = create_compress_files$(EXEEXT) test_check$(EXEEXT) \
test_stream_flags$(EXEEXT) test_filter_flags$(EXEEXT) \
test_block_header$(EXEEXT) test_index$(EXEEXT)
@@ -43,48 +45,60 @@ DIST_COMMON = $(srcdir)/Makefile.am $(srcdir)/Makefile.in
ACLOCAL_M4 = $(top_srcdir)/aclocal.m4
am__aclocal_m4_deps = $(top_srcdir)/m4/acx_pthread.m4 \
$(top_srcdir)/m4/getopt.m4 $(top_srcdir)/m4/gettext.m4 \
- $(top_srcdir)/m4/iconv.m4 $(top_srcdir)/m4/lib-ld.m4 \
+ $(top_srcdir)/m4/iconv.m4 $(top_srcdir)/m4/lc_cpucores.m4 \
+ $(top_srcdir)/m4/lc_physmem.m4 $(top_srcdir)/m4/lib-ld.m4 \
$(top_srcdir)/m4/lib-link.m4 $(top_srcdir)/m4/lib-prefix.m4 \
- $(top_srcdir)/m4/nls.m4 $(top_srcdir)/m4/po.m4 \
- $(top_srcdir)/m4/progtest.m4 $(top_srcdir)/configure.ac
+ $(top_srcdir)/m4/libtool.m4 $(top_srcdir)/m4/ltoptions.m4 \
+ $(top_srcdir)/m4/ltsugar.m4 $(top_srcdir)/m4/ltversion.m4 \
+ $(top_srcdir)/m4/lt~obsolete.m4 $(top_srcdir)/m4/nls.m4 \
+ $(top_srcdir)/m4/po.m4 $(top_srcdir)/m4/posix-shell.m4 \
+ $(top_srcdir)/m4/progtest.m4 $(top_srcdir)/m4/visibility.m4 \
+ $(top_srcdir)/configure.ac
am__configure_deps = $(am__aclocal_m4_deps) $(CONFIGURE_DEPENDENCIES) \
$(ACLOCAL_M4)
mkinstalldirs = $(install_sh) -d
CONFIG_HEADER = $(top_builddir)/config.h
CONFIG_CLEAN_FILES =
+CONFIG_CLEAN_VPATH_FILES =
create_compress_files_SOURCES = create_compress_files.c
create_compress_files_OBJECTS = create_compress_files.$(OBJEXT)
create_compress_files_LDADD = $(LDADD)
+am__DEPENDENCIES_1 =
create_compress_files_DEPENDENCIES = \
- @top_builddir@/src/liblzma/liblzma.la $(am__append_1)
+ $(top_builddir)/src/liblzma/liblzma.la $(am__append_1) \
+ $(am__DEPENDENCIES_1)
test_block_header_SOURCES = test_block_header.c
test_block_header_OBJECTS = test_block_header.$(OBJEXT)
test_block_header_LDADD = $(LDADD)
test_block_header_DEPENDENCIES = \
- @top_builddir@/src/liblzma/liblzma.la $(am__append_1)
+ $(top_builddir)/src/liblzma/liblzma.la $(am__append_1) \
+ $(am__DEPENDENCIES_1)
test_check_SOURCES = test_check.c
test_check_OBJECTS = test_check.$(OBJEXT)
test_check_LDADD = $(LDADD)
-test_check_DEPENDENCIES = @top_builddir@/src/liblzma/liblzma.la \
- $(am__append_1)
+test_check_DEPENDENCIES = $(top_builddir)/src/liblzma/liblzma.la \
+ $(am__append_1) $(am__DEPENDENCIES_1)
test_filter_flags_SOURCES = test_filter_flags.c
test_filter_flags_OBJECTS = test_filter_flags.$(OBJEXT)
test_filter_flags_LDADD = $(LDADD)
test_filter_flags_DEPENDENCIES = \
- @top_builddir@/src/liblzma/liblzma.la $(am__append_1)
+ $(top_builddir)/src/liblzma/liblzma.la $(am__append_1) \
+ $(am__DEPENDENCIES_1)
test_index_SOURCES = test_index.c
test_index_OBJECTS = test_index.$(OBJEXT)
test_index_LDADD = $(LDADD)
-test_index_DEPENDENCIES = @top_builddir@/src/liblzma/liblzma.la \
- $(am__append_1)
+test_index_DEPENDENCIES = $(top_builddir)/src/liblzma/liblzma.la \
+ $(am__append_1) $(am__DEPENDENCIES_1)
test_stream_flags_SOURCES = test_stream_flags.c
test_stream_flags_OBJECTS = test_stream_flags.$(OBJEXT)
test_stream_flags_LDADD = $(LDADD)
test_stream_flags_DEPENDENCIES = \
- @top_builddir@/src/liblzma/liblzma.la $(am__append_1)
+ $(top_builddir)/src/liblzma/liblzma.la $(am__append_1) \
+ $(am__DEPENDENCIES_1)
DEFAULT_INCLUDES = -I.@am__isrc@ -I$(top_builddir)
-depcomp = $(SHELL) $(top_srcdir)/depcomp
+depcomp = $(SHELL) $(top_srcdir)/build-aux/depcomp
am__depfiles_maybe = depfiles
+am__mv = mv -f
COMPILE = $(CC) $(DEFS) $(DEFAULT_INCLUDES) $(INCLUDES) $(AM_CPPFLAGS) \
$(CPPFLAGS) $(AM_CFLAGS) $(CFLAGS)
LTCOMPILE = $(LIBTOOL) --tag=CC $(AM_LIBTOOLFLAGS) $(LIBTOOLFLAGS) \
@@ -101,10 +115,14 @@ DIST_SOURCES = create_compress_files.c test_block_header.c \
test_stream_flags.c
ETAGS = etags
CTAGS = ctags
+am__tty_colors = \
+red=; grn=; lgn=; blu=; std=
DISTFILES = $(DIST_COMMON) $(DIST_SOURCES) $(TEXINFOS) $(EXTRA_DIST)
ACLOCAL = @ACLOCAL@
AMTAR = @AMTAR@
+AM_CFLAGS = @AM_CFLAGS@
AR = @AR@
+AS = @AS@
AUTOCONF = @AUTOCONF@
AUTOHEADER = @AUTOHEADER@
AUTOMAKE = @AUTOMAKE@
@@ -118,22 +136,20 @@ CFLAGS = @CFLAGS@
CFLAG_VISIBILITY = @CFLAG_VISIBILITY@
CPP = @CPP@
CPPFLAGS = @CPPFLAGS@
-CXX = @CXX@
-CXXCPP = @CXXCPP@
-CXXDEPMODE = @CXXDEPMODE@
-CXXFLAGS = @CXXFLAGS@
CYGPATH_W = @CYGPATH_W@
DEFS = @DEFS@
DEPDIR = @DEPDIR@
+DLLTOOL = @DLLTOOL@
DSYMUTIL = @DSYMUTIL@
-ECHO = @ECHO@
+DUMPBIN = @DUMPBIN@
+DYNAMIC_CPPFLAGS = @DYNAMIC_CPPFLAGS@
+DYNAMIC_LDFLAGS = @DYNAMIC_LDFLAGS@
ECHO_C = @ECHO_C@
ECHO_N = @ECHO_N@
ECHO_T = @ECHO_T@
EGREP = @EGREP@
EXEEXT = @EXEEXT@
-F77 = @F77@
-FFLAGS = @FFLAGS@
+FGREP = @FGREP@
GETOPT_H = @GETOPT_H@
GMSGFMT = @GMSGFMT@
GMSGFMT_015 = @GMSGFMT_015@
@@ -146,12 +162,14 @@ INSTALL_SCRIPT = @INSTALL_SCRIPT@
INSTALL_STRIP_PROGRAM = @INSTALL_STRIP_PROGRAM@
INTLLIBS = @INTLLIBS@
INTL_MACOSX_LIBS = @INTL_MACOSX_LIBS@
+LD = @LD@
LDFLAGS = @LDFLAGS@
LIBICONV = @LIBICONV@
LIBINTL = @LIBINTL@
LIBOBJS = @LIBOBJS@
LIBS = @LIBS@
LIBTOOL = @LIBTOOL@
+LIPO = @LIPO@
LN_S = @LN_S@
LTLIBICONV = @LTLIBICONV@
LTLIBINTL = @LTLIBINTL@
@@ -161,23 +179,34 @@ MKDIR_P = @MKDIR_P@
MSGFMT = @MSGFMT@
MSGFMT_015 = @MSGFMT_015@
MSGMERGE = @MSGMERGE@
+NM = @NM@
NMEDIT = @NMEDIT@
+OBJDUMP = @OBJDUMP@
OBJEXT = @OBJEXT@
+OTOOL = @OTOOL@
+OTOOL64 = @OTOOL64@
PACKAGE = @PACKAGE@
PACKAGE_BUGREPORT = @PACKAGE_BUGREPORT@
+PACKAGE_HOMEPAGE = @PACKAGE_HOMEPAGE@
PACKAGE_NAME = @PACKAGE_NAME@
PACKAGE_STRING = @PACKAGE_STRING@
PACKAGE_TARNAME = @PACKAGE_TARNAME@
+PACKAGE_URL = @PACKAGE_URL@
PACKAGE_VERSION = @PACKAGE_VERSION@
PATH_SEPARATOR = @PATH_SEPARATOR@
+POSIX_SHELL = @POSIX_SHELL@
POSUB = @POSUB@
+PREFERABLY_POSIX_SHELL = @PREFERABLY_POSIX_SHELL@
PTHREAD_CC = @PTHREAD_CC@
PTHREAD_CFLAGS = @PTHREAD_CFLAGS@
PTHREAD_LIBS = @PTHREAD_LIBS@
RANLIB = @RANLIB@
+RC = @RC@
SED = @SED@
SET_MAKE = @SET_MAKE@
SHELL = @SHELL@
+STATIC_CPPFLAGS = @STATIC_CPPFLAGS@
+STATIC_LDFLAGS = @STATIC_LDFLAGS@
STRIP = @STRIP@
USE_NLS = @USE_NLS@
VERSION = @VERSION@
@@ -188,8 +217,7 @@ abs_srcdir = @abs_srcdir@
abs_top_builddir = @abs_top_builddir@
abs_top_srcdir = @abs_top_srcdir@
ac_ct_CC = @ac_ct_CC@
-ac_ct_CXX = @ac_ct_CXX@
-ac_ct_F77 = @ac_ct_F77@
+ac_ct_DUMPBIN = @ac_ct_DUMPBIN@
acx_pthread_config = @acx_pthread_config@
am__include = @am__include@
am__leading_dot = @am__leading_dot@
@@ -221,6 +249,7 @@ libdir = @libdir@
libexecdir = @libexecdir@
localedir = @localedir@
localstatedir = @localstatedir@
+lt_ECHO = @lt_ECHO@
mandir = @mandir@
mkdir_p = @mkdir_p@
oldincludedir = @oldincludedir@
@@ -236,6 +265,7 @@ target_alias = @target_alias@
top_build_prefix = @top_build_prefix@
top_builddir = @top_builddir@
top_srcdir = @top_srcdir@
+xz = @xz@
EXTRA_DIST = \
files \
tests.h \
@@ -246,11 +276,14 @@ EXTRA_DIST = \
compress_prepared_bcj_x86
AM_CPPFLAGS = \
- -I@top_srcdir@/src/common \
- -I@top_srcdir@/src/liblzma/api \
- -I@top_builddir@/lib
-
-LDADD = @top_builddir@/src/liblzma/liblzma.la $(am__append_1)
+ -I$(top_srcdir)/src/common \
+ -I$(top_srcdir)/src/liblzma/api \
+ -I$(top_builddir)/lib \
+ $(STATIC_CPPFLAGS)
+
+AM_LDFLAGS = $(STATIC_LDFLAGS)
+LDADD = $(top_builddir)/src/liblzma/liblzma.la $(am__append_1) \
+ $(LTLIBINTL)
all: all-am
.SUFFIXES:
@@ -264,9 +297,9 @@ $(srcdir)/Makefile.in: $(srcdir)/Makefile.am $(am__configure_deps)
exit 1;; \
esac; \
done; \
- echo ' cd $(top_srcdir) && $(AUTOMAKE) --foreign tests/Makefile'; \
- cd $(top_srcdir) && \
- $(AUTOMAKE) --foreign tests/Makefile
+ echo ' cd $(top_srcdir) && $(AUTOMAKE) --foreign tests/Makefile'; \
+ $(am__cd) $(top_srcdir) && \
+ $(AUTOMAKE) --foreign tests/Makefile
.PRECIOUS: Makefile
Makefile: $(srcdir)/Makefile.in $(top_builddir)/config.status
@case '$?' in \
@@ -284,13 +317,16 @@ $(top_srcdir)/configure: $(am__configure_deps)
cd $(top_builddir) && $(MAKE) $(AM_MAKEFLAGS) am--refresh
$(ACLOCAL_M4): $(am__aclocal_m4_deps)
cd $(top_builddir) && $(MAKE) $(AM_MAKEFLAGS) am--refresh
+$(am__aclocal_m4_deps):
clean-checkPROGRAMS:
- @list='$(check_PROGRAMS)'; for p in $$list; do \
- f=`echo $$p|sed 's/$(EXEEXT)$$//'`; \
- echo " rm -f $$p $$f"; \
- rm -f $$p $$f ; \
- done
+ @list='$(check_PROGRAMS)'; test -n "$$list" || exit 0; \
+ echo " rm -f" $$list; \
+ rm -f $$list || exit $$?; \
+ test -n "$(EXEEXT)" || exit 0; \
+ list=`for p in $$list; do echo "$$p"; done | sed 's/$(EXEEXT)$$//'`; \
+ echo " rm -f" $$list; \
+ rm -f $$list
create_compress_files$(EXEEXT): $(create_compress_files_OBJECTS) $(create_compress_files_DEPENDENCIES)
@rm -f create_compress_files$(EXEEXT)
$(LINK) $(create_compress_files_OBJECTS) $(create_compress_files_LDADD) $(LIBS)
@@ -325,21 +361,21 @@ distclean-compile:
.c.o:
@am__fastdepCC_TRUE@ $(COMPILE) -MT $@ -MD -MP -MF $(DEPDIR)/$*.Tpo -c -o $@ $<
-@am__fastdepCC_TRUE@ mv -f $(DEPDIR)/$*.Tpo $(DEPDIR)/$*.Po
+@am__fastdepCC_TRUE@ $(am__mv) $(DEPDIR)/$*.Tpo $(DEPDIR)/$*.Po
@AMDEP_TRUE@@am__fastdepCC_FALSE@ source='$<' object='$@' libtool=no @AMDEPBACKSLASH@
@AMDEP_TRUE@@am__fastdepCC_FALSE@ DEPDIR=$(DEPDIR) $(CCDEPMODE) $(depcomp) @AMDEPBACKSLASH@
@am__fastdepCC_FALSE@ $(COMPILE) -c $<
.c.obj:
@am__fastdepCC_TRUE@ $(COMPILE) -MT $@ -MD -MP -MF $(DEPDIR)/$*.Tpo -c -o $@ `$(CYGPATH_W) '$<'`
-@am__fastdepCC_TRUE@ mv -f $(DEPDIR)/$*.Tpo $(DEPDIR)/$*.Po
+@am__fastdepCC_TRUE@ $(am__mv) $(DEPDIR)/$*.Tpo $(DEPDIR)/$*.Po
@AMDEP_TRUE@@am__fastdepCC_FALSE@ source='$<' object='$@' libtool=no @AMDEPBACKSLASH@
@AMDEP_TRUE@@am__fastdepCC_FALSE@ DEPDIR=$(DEPDIR) $(CCDEPMODE) $(depcomp) @AMDEPBACKSLASH@
@am__fastdepCC_FALSE@ $(COMPILE) -c `$(CYGPATH_W) '$<'`
.c.lo:
@am__fastdepCC_TRUE@ $(LTCOMPILE) -MT $@ -MD -MP -MF $(DEPDIR)/$*.Tpo -c -o $@ $<
-@am__fastdepCC_TRUE@ mv -f $(DEPDIR)/$*.Tpo $(DEPDIR)/$*.Plo
+@am__fastdepCC_TRUE@ $(am__mv) $(DEPDIR)/$*.Tpo $(DEPDIR)/$*.Plo
@AMDEP_TRUE@@am__fastdepCC_FALSE@ source='$<' object='$@' libtool=yes @AMDEPBACKSLASH@
@AMDEP_TRUE@@am__fastdepCC_FALSE@ DEPDIR=$(DEPDIR) $(CCDEPMODE) $(depcomp) @AMDEPBACKSLASH@
@am__fastdepCC_FALSE@ $(LTCOMPILE) -c -o $@ $<
@@ -362,7 +398,7 @@ tags: TAGS
TAGS: $(HEADERS) $(SOURCES) $(TAGS_DEPENDENCIES) \
$(TAGS_FILES) $(LISP)
- tags=; \
+ set x; \
here=`pwd`; \
list='$(SOURCES) $(HEADERS) $(LISP) $(TAGS_FILES)'; \
unique=`for i in $$list; do \
@@ -370,29 +406,34 @@ TAGS: $(HEADERS) $(SOURCES) $(TAGS_DEPENDENCIES) \
done | \
$(AWK) '{ files[$$0] = 1; nonempty = 1; } \
END { if (nonempty) { for (i in files) print i; }; }'`; \
- if test -z "$(ETAGS_ARGS)$$tags$$unique"; then :; else \
+ shift; \
+ if test -z "$(ETAGS_ARGS)$$*$$unique"; then :; else \
test -n "$$unique" || unique=$$empty_fix; \
- $(ETAGS) $(ETAGSFLAGS) $(AM_ETAGSFLAGS) $(ETAGS_ARGS) \
- $$tags $$unique; \
+ if test $$# -gt 0; then \
+ $(ETAGS) $(ETAGSFLAGS) $(AM_ETAGSFLAGS) $(ETAGS_ARGS) \
+ "$$@" $$unique; \
+ else \
+ $(ETAGS) $(ETAGSFLAGS) $(AM_ETAGSFLAGS) $(ETAGS_ARGS) \
+ $$unique; \
+ fi; \
fi
ctags: CTAGS
CTAGS: $(HEADERS) $(SOURCES) $(TAGS_DEPENDENCIES) \
$(TAGS_FILES) $(LISP)
- tags=; \
list='$(SOURCES) $(HEADERS) $(LISP) $(TAGS_FILES)'; \
unique=`for i in $$list; do \
if test -f "$$i"; then echo $$i; else echo $(srcdir)/$$i; fi; \
done | \
$(AWK) '{ files[$$0] = 1; nonempty = 1; } \
END { if (nonempty) { for (i in files) print i; }; }'`; \
- test -z "$(CTAGS_ARGS)$$tags$$unique" \
+ test -z "$(CTAGS_ARGS)$$unique" \
|| $(CTAGS) $(CTAGSFLAGS) $(AM_CTAGSFLAGS) $(CTAGS_ARGS) \
- $$tags $$unique
+ $$unique
GTAGS:
here=`$(am__cd) $(top_builddir) && pwd` \
- && cd $(top_srcdir) \
- && gtags -i $(GTAGS_ARGS) $$here
+ && $(am__cd) $(top_srcdir) \
+ && gtags -i $(GTAGS_ARGS) "$$here"
distclean-tags:
-rm -f TAGS ID GTAGS GRTAGS GSYMS GPATH tags
@@ -401,6 +442,7 @@ check-TESTS: $(TESTS)
@failed=0; all=0; xfail=0; xpass=0; skip=0; \
srcdir=$(srcdir); export srcdir; \
list=' $(TESTS) '; \
+ $(am__tty_colors); \
if test -n "$$list"; then \
for tst in $$list; do \
if test -f ./$$tst; then dir=./; \
@@ -412,10 +454,10 @@ check-TESTS: $(TESTS)
*[\ \ ]$$tst[\ \ ]*) \
xpass=`expr $$xpass + 1`; \
failed=`expr $$failed + 1`; \
- echo "XPASS: $$tst"; \
+ col=$$red; res=XPASS; \
;; \
*) \
- echo "PASS: $$tst"; \
+ col=$$grn; res=PASS; \
;; \
esac; \
elif test $$? -ne 77; then \
@@ -423,17 +465,18 @@ check-TESTS: $(TESTS)
case " $(XFAIL_TESTS) " in \
*[\ \ ]$$tst[\ \ ]*) \
xfail=`expr $$xfail + 1`; \
- echo "XFAIL: $$tst"; \
+ col=$$lgn; res=XFAIL; \
;; \
*) \
failed=`expr $$failed + 1`; \
- echo "FAIL: $$tst"; \
+ col=$$red; res=FAIL; \
;; \
esac; \
else \
skip=`expr $$skip + 1`; \
- echo "SKIP: $$tst"; \
+ col=$$blu; res=SKIP; \
fi; \
+ echo "$${col}$$res$${std}: $$tst"; \
done; \
if test "$$all" -eq 1; then \
tests="test"; \
@@ -475,11 +518,15 @@ check-TESTS: $(TESTS)
dashes="$$report"; \
fi; \
dashes=`echo "$$dashes" | sed s/./=/g`; \
- echo "$$dashes"; \
+ if test "$$failed" -eq 0; then \
+ echo "$$grn$$dashes"; \
+ else \
+ echo "$$red$$dashes"; \
+ fi; \
echo "$$banner"; \
test -z "$$skipped" || echo "$$skipped"; \
test -z "$$report" || echo "$$report"; \
- echo "$$dashes"; \
+ echo "$$dashes$$std"; \
test "$$failed" -eq 0; \
else :; fi
@@ -499,13 +546,17 @@ distdir: $(DISTFILES)
if test -f $$file || test -d $$file; then d=.; else d=$(srcdir); fi; \
if test -d $$d/$$file; then \
dir=`echo "/$$file" | sed -e 's,/[^/]*$$,,'`; \
+ if test -d "$(distdir)/$$file"; then \
+ find "$(distdir)/$$file" -type d ! -perm -700 -exec chmod u+rwx {} \;; \
+ fi; \
if test -d $(srcdir)/$$file && test $$d != $(srcdir); then \
- cp -pR $(srcdir)/$$file $(distdir)$$dir || exit 1; \
+ cp -fpR $(srcdir)/$$file "$(distdir)$$dir" || exit 1; \
+ find "$(distdir)/$$file" -type d ! -perm -700 -exec chmod u+rwx {} \;; \
fi; \
- cp -pR $$d/$$file $(distdir)$$dir || exit 1; \
+ cp -fpR $$d/$$file "$(distdir)$$dir" || exit 1; \
else \
- test -f $(distdir)/$$file \
- || cp -p $$d/$$file $(distdir)/$$file \
+ test -f "$(distdir)/$$file" \
+ || cp -p $$d/$$file "$(distdir)/$$file" \
|| exit 1; \
fi; \
done
@@ -535,6 +586,7 @@ clean-generic:
distclean-generic:
-test -z "$(CONFIG_CLEAN_FILES)" || rm -f $(CONFIG_CLEAN_FILES)
+ -test . = "$(srcdir)" || test -z "$(CONFIG_CLEAN_VPATH_FILES)" || rm -f $(CONFIG_CLEAN_VPATH_FILES)
maintainer-clean-generic:
@echo "This command is intended for maintainers to use"
@@ -556,6 +608,8 @@ dvi-am:
html: html-am
+html-am:
+
info: info-am
info-am:
@@ -564,18 +618,28 @@ install-data-am:
install-dvi: install-dvi-am
+install-dvi-am:
+
install-exec-am:
install-html: install-html-am
+install-html-am:
+
install-info: install-info-am
+install-info-am:
+
install-man:
install-pdf: install-pdf-am
+install-pdf-am:
+
install-ps: install-ps-am
+install-ps-am:
+
installcheck-am:
maintainer-clean: maintainer-clean-am
@@ -598,7 +662,7 @@ ps-am:
uninstall-am:
-.MAKE: install-am install-strip
+.MAKE: check-am install-am install-strip
.PHONY: CTAGS GTAGS all all-am check check-TESTS check-am clean \
clean-checkPROGRAMS clean-generic clean-libtool clean-local \
@@ -617,6 +681,7 @@ uninstall-am:
clean-local:
-rm -f compress_generated_*
+
# Tell versions [3.59,3.63) of GNU make to not export all variables.
# Otherwise a system limit (for SysV at least) may be exceeded.
.NOEXPORT:
diff --git a/Build/source/utils/xz-4.999.8beta/tests/bcj_test.c b/Build/source/utils/xz-4.999.9beta/tests/bcj_test.c
index 91456de77fa..05de38a28a3 100644
--- a/Build/source/utils/xz-4.999.8beta/tests/bcj_test.c
+++ b/Build/source/utils/xz-4.999.9beta/tests/bcj_test.c
@@ -11,11 +11,10 @@
/// Compiling: gcc -std=c99 -fPIC -c bcj_test.c
/// Don't optimize or strip.
//
-// This code has been put into the public domain.
+// Author: Lasse Collin
//
-// This library is distributed in the hope that it will be useful,
-// but WITHOUT ANY WARRANTY; without even the implied warranty of
-// MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.
+// This file has been put into the public domain.
+// You can do whatever you want with this file.
//
///////////////////////////////////////////////////////////////////////////////
diff --git a/Build/source/utils/xz-4.999.8beta/tests/compress_prepared_bcj_sparc b/Build/source/utils/xz-4.999.9beta/tests/compress_prepared_bcj_sparc
index 86ea7ddb11b..86ea7ddb11b 100644
--- a/Build/source/utils/xz-4.999.8beta/tests/compress_prepared_bcj_sparc
+++ b/Build/source/utils/xz-4.999.9beta/tests/compress_prepared_bcj_sparc
Binary files differ
diff --git a/Build/source/utils/xz-4.999.8beta/tests/compress_prepared_bcj_x86 b/Build/source/utils/xz-4.999.9beta/tests/compress_prepared_bcj_x86
index bcc546f04cb..bcc546f04cb 100644
--- a/Build/source/utils/xz-4.999.8beta/tests/compress_prepared_bcj_x86
+++ b/Build/source/utils/xz-4.999.9beta/tests/compress_prepared_bcj_x86
Binary files differ
diff --git a/Build/source/utils/xz-4.999.8beta/tests/create_compress_files.c b/Build/source/utils/xz-4.999.9beta/tests/create_compress_files.c
index 2e394297b12..44367d8f18e 100644
--- a/Build/source/utils/xz-4.999.8beta/tests/create_compress_files.c
+++ b/Build/source/utils/xz-4.999.9beta/tests/create_compress_files.c
@@ -6,17 +6,10 @@
/// Using a test file generator program saves space in the source code
/// package considerably.
//
-// Copyright (C) 2008 Lasse Collin
+// Author: Lasse Collin
//
-// This library is free software; you can redistribute it and/or
-// modify it under the terms of the GNU Lesser General Public
-// License as published by the Free Software Foundation; either
-// version 2.1 of the License, or (at your option) any later version.
-//
-// This library is distributed in the hope that it will be useful,
-// but WITHOUT ANY WARRANTY; without even the implied warranty of
-// MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the GNU
-// Lesser General Public License for more details.
+// This file has been put into the public domain.
+// You can do whatever you want with this file.
//
///////////////////////////////////////////////////////////////////////////////
diff --git a/Build/source/utils/xz-4.999.8beta/tests/files/README b/Build/source/utils/xz-4.999.9beta/tests/files/README
index a8516f2a5b0..392ff768a90 100644
--- a/Build/source/utils/xz-4.999.8beta/tests/files/README
+++ b/Build/source/utils/xz-4.999.9beta/tests/files/README
@@ -97,7 +97,7 @@
how this file handled (it may reject it, or decode it possibly with
a warning).
- unsupported-block_header.xz has a non-nul byte in Header Padding,
+ unsupported-block_header.xz has a non-null byte in Header Padding,
which may indicate presence of a new unsupported field.
unsupported-filter_flags-1.xz has unsupported Filter ID 0x7F.
@@ -177,25 +177,26 @@
bad-1-block_header-3.xz has wrong CRC32 in Block Header.
bad-1-block_header-4.xz has too big Compressed Size in Block Header
- (2^64 - 1 bytes while maximum is a little less, because the whole
- Block must stay smaller than 2^64). It's important that the file
+ (2^63 - 1 bytes while maximum is a little less, because the whole
+ Block must stay smaller than 2^63). It's important that the file
gets rejected due to invalid Compressed Size value; the decoder
must not try decoding the Compressed Data field.
bad-1-block_header-5.xz has zero as Compressed Size in Block Header.
- bad-2-index-1.xz has wrong Total Sizes in Index.
+ bad-2-index-1.xz has wrong Unpadded Sizes in Index.
bad-2-index-2.xz has wrong Uncompressed Sizes in Index.
- bad-2-index-3.xz has non-nul byte in Index Padding.
+ bad-2-index-3.xz has non-null byte in Index Padding.
bad-2-index-4.xz wrong CRC32 in Index.
- bad-2-index-5.xz has zero as Total Size. It is important that the file
- gets rejected specifically due to Total Size having an invalid value.
+ bad-2-index-5.xz has zero as Unpadded Size. It is important that the
+ file gets rejected specifically due to Unpadded Size having an invalid
+ value.
- bad-2-compressed_data_padding.xz has non-nul byte in the padding of
+ bad-2-compressed_data_padding.xz has non-null byte in the padding of
the Compressed Data field of the first Block.
bad-1-check-crc32.xz has wrong Check (CRC32).
diff --git a/Build/source/utils/xz-4.999.8beta/tests/files/bad-0-backward_size.xz b/Build/source/utils/xz-4.999.9beta/tests/files/bad-0-backward_size.xz
index 2b46fa937b3..2b46fa937b3 100644
--- a/Build/source/utils/xz-4.999.8beta/tests/files/bad-0-backward_size.xz
+++ b/Build/source/utils/xz-4.999.9beta/tests/files/bad-0-backward_size.xz
Binary files differ
diff --git a/Build/source/utils/xz-4.999.8beta/tests/files/bad-0-empty-truncated.xz b/Build/source/utils/xz-4.999.9beta/tests/files/bad-0-empty-truncated.xz
index f879af84ac4..f879af84ac4 100644
--- a/Build/source/utils/xz-4.999.8beta/tests/files/bad-0-empty-truncated.xz
+++ b/Build/source/utils/xz-4.999.9beta/tests/files/bad-0-empty-truncated.xz
Binary files differ
diff --git a/Build/source/utils/xz-4.999.8beta/tests/files/bad-0-footer_magic.xz b/Build/source/utils/xz-4.999.9beta/tests/files/bad-0-footer_magic.xz
index 5d9e3894bc2..5d9e3894bc2 100644
--- a/Build/source/utils/xz-4.999.8beta/tests/files/bad-0-footer_magic.xz
+++ b/Build/source/utils/xz-4.999.9beta/tests/files/bad-0-footer_magic.xz
Binary files differ
diff --git a/Build/source/utils/xz-4.999.8beta/tests/files/bad-0-header_magic.xz b/Build/source/utils/xz-4.999.9beta/tests/files/bad-0-header_magic.xz
index 5984a453bf8..5984a453bf8 100644
--- a/Build/source/utils/xz-4.999.8beta/tests/files/bad-0-header_magic.xz
+++ b/Build/source/utils/xz-4.999.9beta/tests/files/bad-0-header_magic.xz
Binary files differ
diff --git a/Build/source/utils/xz-4.999.8beta/tests/files/bad-0-nonempty_index.xz b/Build/source/utils/xz-4.999.9beta/tests/files/bad-0-nonempty_index.xz
index ed6e81fa046..ed6e81fa046 100644
--- a/Build/source/utils/xz-4.999.8beta/tests/files/bad-0-nonempty_index.xz
+++ b/Build/source/utils/xz-4.999.9beta/tests/files/bad-0-nonempty_index.xz
Binary files differ
diff --git a/Build/source/utils/xz-4.999.8beta/tests/files/bad-0cat-alone.xz b/Build/source/utils/xz-4.999.9beta/tests/files/bad-0cat-alone.xz
index a915a3a1e2b..a915a3a1e2b 100644
--- a/Build/source/utils/xz-4.999.8beta/tests/files/bad-0cat-alone.xz
+++ b/Build/source/utils/xz-4.999.9beta/tests/files/bad-0cat-alone.xz
Binary files differ
diff --git a/Build/source/utils/xz-4.999.8beta/tests/files/bad-0cat-header_magic.xz b/Build/source/utils/xz-4.999.9beta/tests/files/bad-0cat-header_magic.xz
index 426bf2d4218..426bf2d4218 100644
--- a/Build/source/utils/xz-4.999.8beta/tests/files/bad-0cat-header_magic.xz
+++ b/Build/source/utils/xz-4.999.9beta/tests/files/bad-0cat-header_magic.xz
Binary files differ
diff --git a/Build/source/utils/xz-4.999.8beta/tests/files/bad-0catpad-empty.xz b/Build/source/utils/xz-4.999.9beta/tests/files/bad-0catpad-empty.xz
index 97c13302006..97c13302006 100644
--- a/Build/source/utils/xz-4.999.8beta/tests/files/bad-0catpad-empty.xz
+++ b/Build/source/utils/xz-4.999.9beta/tests/files/bad-0catpad-empty.xz
Binary files differ
diff --git a/Build/source/utils/xz-4.999.8beta/tests/files/bad-0pad-empty.xz b/Build/source/utils/xz-4.999.9beta/tests/files/bad-0pad-empty.xz
index 45e00b74a3f..45e00b74a3f 100644
--- a/Build/source/utils/xz-4.999.8beta/tests/files/bad-0pad-empty.xz
+++ b/Build/source/utils/xz-4.999.9beta/tests/files/bad-0pad-empty.xz
Binary files differ
diff --git a/Build/source/utils/xz-4.999.8beta/tests/files/bad-1-block_header-1.xz b/Build/source/utils/xz-4.999.9beta/tests/files/bad-1-block_header-1.xz
index d991536aed8..d991536aed8 100644
--- a/Build/source/utils/xz-4.999.8beta/tests/files/bad-1-block_header-1.xz
+++ b/Build/source/utils/xz-4.999.9beta/tests/files/bad-1-block_header-1.xz
Binary files differ
diff --git a/Build/source/utils/xz-4.999.8beta/tests/files/bad-1-block_header-2.xz b/Build/source/utils/xz-4.999.9beta/tests/files/bad-1-block_header-2.xz
index ae42ecf0f9b..ae42ecf0f9b 100644
--- a/Build/source/utils/xz-4.999.8beta/tests/files/bad-1-block_header-2.xz
+++ b/Build/source/utils/xz-4.999.9beta/tests/files/bad-1-block_header-2.xz
Binary files differ
diff --git a/Build/source/utils/xz-4.999.8beta/tests/files/bad-1-block_header-3.xz b/Build/source/utils/xz-4.999.9beta/tests/files/bad-1-block_header-3.xz
index 606cbd20e25..606cbd20e25 100644
--- a/Build/source/utils/xz-4.999.8beta/tests/files/bad-1-block_header-3.xz
+++ b/Build/source/utils/xz-4.999.9beta/tests/files/bad-1-block_header-3.xz
Binary files differ
diff --git a/Build/source/utils/xz-4.999.8beta/tests/files/bad-1-block_header-4.xz b/Build/source/utils/xz-4.999.9beta/tests/files/bad-1-block_header-4.xz
index e72dfbfc394..e72dfbfc394 100644
--- a/Build/source/utils/xz-4.999.8beta/tests/files/bad-1-block_header-4.xz
+++ b/Build/source/utils/xz-4.999.9beta/tests/files/bad-1-block_header-4.xz
Binary files differ
diff --git a/Build/source/utils/xz-4.999.8beta/tests/files/bad-1-block_header-5.xz b/Build/source/utils/xz-4.999.9beta/tests/files/bad-1-block_header-5.xz
index 96521129267..96521129267 100644
--- a/Build/source/utils/xz-4.999.8beta/tests/files/bad-1-block_header-5.xz
+++ b/Build/source/utils/xz-4.999.9beta/tests/files/bad-1-block_header-5.xz
Binary files differ
diff --git a/Build/source/utils/xz-4.999.8beta/tests/files/bad-1-check-crc32.xz b/Build/source/utils/xz-4.999.9beta/tests/files/bad-1-check-crc32.xz
index 1ebe1310b5a..1ebe1310b5a 100644
--- a/Build/source/utils/xz-4.999.8beta/tests/files/bad-1-check-crc32.xz
+++ b/Build/source/utils/xz-4.999.9beta/tests/files/bad-1-check-crc32.xz
Binary files differ
diff --git a/Build/source/utils/xz-4.999.8beta/tests/files/bad-1-check-crc64.xz b/Build/source/utils/xz-4.999.9beta/tests/files/bad-1-check-crc64.xz
index cdb77093db1..cdb77093db1 100644
--- a/Build/source/utils/xz-4.999.8beta/tests/files/bad-1-check-crc64.xz
+++ b/Build/source/utils/xz-4.999.9beta/tests/files/bad-1-check-crc64.xz
Binary files differ
diff --git a/Build/source/utils/xz-4.999.8beta/tests/files/bad-1-check-sha256.xz b/Build/source/utils/xz-4.999.9beta/tests/files/bad-1-check-sha256.xz
index def7bff174f..def7bff174f 100644
--- a/Build/source/utils/xz-4.999.8beta/tests/files/bad-1-check-sha256.xz
+++ b/Build/source/utils/xz-4.999.9beta/tests/files/bad-1-check-sha256.xz
Binary files differ
diff --git a/Build/source/utils/xz-4.999.8beta/tests/files/bad-1-lzma2-1.xz b/Build/source/utils/xz-4.999.9beta/tests/files/bad-1-lzma2-1.xz
index 640f592e803..640f592e803 100644
--- a/Build/source/utils/xz-4.999.8beta/tests/files/bad-1-lzma2-1.xz
+++ b/Build/source/utils/xz-4.999.9beta/tests/files/bad-1-lzma2-1.xz
Binary files differ
diff --git a/Build/source/utils/xz-4.999.8beta/tests/files/bad-1-lzma2-2.xz b/Build/source/utils/xz-4.999.9beta/tests/files/bad-1-lzma2-2.xz
index 69ab07d4577..69ab07d4577 100644
--- a/Build/source/utils/xz-4.999.8beta/tests/files/bad-1-lzma2-2.xz
+++ b/Build/source/utils/xz-4.999.9beta/tests/files/bad-1-lzma2-2.xz
Binary files differ
diff --git a/Build/source/utils/xz-4.999.8beta/tests/files/bad-1-lzma2-3.xz b/Build/source/utils/xz-4.999.9beta/tests/files/bad-1-lzma2-3.xz
index 66f48c5d535..66f48c5d535 100644
--- a/Build/source/utils/xz-4.999.8beta/tests/files/bad-1-lzma2-3.xz
+++ b/Build/source/utils/xz-4.999.9beta/tests/files/bad-1-lzma2-3.xz
Binary files differ
diff --git a/Build/source/utils/xz-4.999.8beta/tests/files/bad-1-lzma2-4.xz b/Build/source/utils/xz-4.999.9beta/tests/files/bad-1-lzma2-4.xz
index ac970419399..ac970419399 100644
--- a/Build/source/utils/xz-4.999.8beta/tests/files/bad-1-lzma2-4.xz
+++ b/Build/source/utils/xz-4.999.9beta/tests/files/bad-1-lzma2-4.xz
Binary files differ
diff --git a/Build/source/utils/xz-4.999.8beta/tests/files/bad-1-lzma2-5.xz b/Build/source/utils/xz-4.999.9beta/tests/files/bad-1-lzma2-5.xz
index 700464d51ef..700464d51ef 100644
--- a/Build/source/utils/xz-4.999.8beta/tests/files/bad-1-lzma2-5.xz
+++ b/Build/source/utils/xz-4.999.9beta/tests/files/bad-1-lzma2-5.xz
Binary files differ
diff --git a/Build/source/utils/xz-4.999.8beta/tests/files/bad-1-lzma2-6.xz b/Build/source/utils/xz-4.999.9beta/tests/files/bad-1-lzma2-6.xz
index 2bda0c4b8b8..2bda0c4b8b8 100644
--- a/Build/source/utils/xz-4.999.8beta/tests/files/bad-1-lzma2-6.xz
+++ b/Build/source/utils/xz-4.999.9beta/tests/files/bad-1-lzma2-6.xz
Binary files differ
diff --git a/Build/source/utils/xz-4.999.8beta/tests/files/bad-1-lzma2-7.xz b/Build/source/utils/xz-4.999.9beta/tests/files/bad-1-lzma2-7.xz
index 8cc711c19ed..8cc711c19ed 100644
--- a/Build/source/utils/xz-4.999.8beta/tests/files/bad-1-lzma2-7.xz
+++ b/Build/source/utils/xz-4.999.9beta/tests/files/bad-1-lzma2-7.xz
Binary files differ
diff --git a/Build/source/utils/xz-4.999.8beta/tests/files/bad-1-lzma2-8.xz b/Build/source/utils/xz-4.999.9beta/tests/files/bad-1-lzma2-8.xz
index f21a71b63f3..f21a71b63f3 100644
--- a/Build/source/utils/xz-4.999.8beta/tests/files/bad-1-lzma2-8.xz
+++ b/Build/source/utils/xz-4.999.9beta/tests/files/bad-1-lzma2-8.xz
Binary files differ
diff --git a/Build/source/utils/xz-4.999.8beta/tests/files/bad-1-stream_flags-1.xz b/Build/source/utils/xz-4.999.9beta/tests/files/bad-1-stream_flags-1.xz
index 6511773ec69..6511773ec69 100644
--- a/Build/source/utils/xz-4.999.8beta/tests/files/bad-1-stream_flags-1.xz
+++ b/Build/source/utils/xz-4.999.9beta/tests/files/bad-1-stream_flags-1.xz
Binary files differ
diff --git a/Build/source/utils/xz-4.999.8beta/tests/files/bad-1-stream_flags-2.xz b/Build/source/utils/xz-4.999.9beta/tests/files/bad-1-stream_flags-2.xz
index 0c66b364b0e..0c66b364b0e 100644
--- a/Build/source/utils/xz-4.999.8beta/tests/files/bad-1-stream_flags-2.xz
+++ b/Build/source/utils/xz-4.999.9beta/tests/files/bad-1-stream_flags-2.xz
Binary files differ
diff --git a/Build/source/utils/xz-4.999.8beta/tests/files/bad-1-stream_flags-3.xz b/Build/source/utils/xz-4.999.9beta/tests/files/bad-1-stream_flags-3.xz
index a9b1f98365f..a9b1f98365f 100644
--- a/Build/source/utils/xz-4.999.8beta/tests/files/bad-1-stream_flags-3.xz
+++ b/Build/source/utils/xz-4.999.9beta/tests/files/bad-1-stream_flags-3.xz
Binary files differ
diff --git a/Build/source/utils/xz-4.999.8beta/tests/files/bad-1-vli-1.xz b/Build/source/utils/xz-4.999.9beta/tests/files/bad-1-vli-1.xz
index 6514ab12946..6514ab12946 100644
--- a/Build/source/utils/xz-4.999.8beta/tests/files/bad-1-vli-1.xz
+++ b/Build/source/utils/xz-4.999.9beta/tests/files/bad-1-vli-1.xz
Binary files differ
diff --git a/Build/source/utils/xz-4.999.8beta/tests/files/bad-1-vli-2.xz b/Build/source/utils/xz-4.999.9beta/tests/files/bad-1-vli-2.xz
index c16941b4083..c16941b4083 100644
--- a/Build/source/utils/xz-4.999.8beta/tests/files/bad-1-vli-2.xz
+++ b/Build/source/utils/xz-4.999.9beta/tests/files/bad-1-vli-2.xz
Binary files differ
diff --git a/Build/source/utils/xz-4.999.8beta/tests/files/bad-2-compressed_data_padding.xz b/Build/source/utils/xz-4.999.9beta/tests/files/bad-2-compressed_data_padding.xz
index 382d0476700..382d0476700 100644
--- a/Build/source/utils/xz-4.999.8beta/tests/files/bad-2-compressed_data_padding.xz
+++ b/Build/source/utils/xz-4.999.9beta/tests/files/bad-2-compressed_data_padding.xz
Binary files differ
diff --git a/Build/source/utils/xz-4.999.8beta/tests/files/bad-2-index-1.xz b/Build/source/utils/xz-4.999.9beta/tests/files/bad-2-index-1.xz
index f51ed214d16..f51ed214d16 100644
--- a/Build/source/utils/xz-4.999.8beta/tests/files/bad-2-index-1.xz
+++ b/Build/source/utils/xz-4.999.9beta/tests/files/bad-2-index-1.xz
Binary files differ
diff --git a/Build/source/utils/xz-4.999.8beta/tests/files/bad-2-index-2.xz b/Build/source/utils/xz-4.999.9beta/tests/files/bad-2-index-2.xz
index d7d00ff343f..d7d00ff343f 100644
--- a/Build/source/utils/xz-4.999.8beta/tests/files/bad-2-index-2.xz
+++ b/Build/source/utils/xz-4.999.9beta/tests/files/bad-2-index-2.xz
Binary files differ
diff --git a/Build/source/utils/xz-4.999.8beta/tests/files/bad-2-index-3.xz b/Build/source/utils/xz-4.999.9beta/tests/files/bad-2-index-3.xz
index 62428b87223..62428b87223 100644
--- a/Build/source/utils/xz-4.999.8beta/tests/files/bad-2-index-3.xz
+++ b/Build/source/utils/xz-4.999.9beta/tests/files/bad-2-index-3.xz
Binary files differ
diff --git a/Build/source/utils/xz-4.999.8beta/tests/files/bad-2-index-4.xz b/Build/source/utils/xz-4.999.9beta/tests/files/bad-2-index-4.xz
index 9cf2df65da5..9cf2df65da5 100644
--- a/Build/source/utils/xz-4.999.8beta/tests/files/bad-2-index-4.xz
+++ b/Build/source/utils/xz-4.999.9beta/tests/files/bad-2-index-4.xz
Binary files differ
diff --git a/Build/source/utils/xz-4.999.8beta/tests/files/bad-2-index-5.xz b/Build/source/utils/xz-4.999.9beta/tests/files/bad-2-index-5.xz
index 0a79270900a..0a79270900a 100644
--- a/Build/source/utils/xz-4.999.8beta/tests/files/bad-2-index-5.xz
+++ b/Build/source/utils/xz-4.999.9beta/tests/files/bad-2-index-5.xz
Binary files differ
diff --git a/Build/source/utils/xz-4.999.8beta/tests/files/good-0-empty.xz b/Build/source/utils/xz-4.999.9beta/tests/files/good-0-empty.xz
index 83b95e05bc8..83b95e05bc8 100644
--- a/Build/source/utils/xz-4.999.8beta/tests/files/good-0-empty.xz
+++ b/Build/source/utils/xz-4.999.9beta/tests/files/good-0-empty.xz
Binary files differ
diff --git a/Build/source/utils/xz-4.999.8beta/tests/files/good-0cat-empty.xz b/Build/source/utils/xz-4.999.9beta/tests/files/good-0cat-empty.xz
index e6fc31461db..e6fc31461db 100644
--- a/Build/source/utils/xz-4.999.8beta/tests/files/good-0cat-empty.xz
+++ b/Build/source/utils/xz-4.999.9beta/tests/files/good-0cat-empty.xz
Binary files differ
diff --git a/Build/source/utils/xz-4.999.8beta/tests/files/good-0catpad-empty.xz b/Build/source/utils/xz-4.999.9beta/tests/files/good-0catpad-empty.xz
index 4f86b7d152d..4f86b7d152d 100644
--- a/Build/source/utils/xz-4.999.8beta/tests/files/good-0catpad-empty.xz
+++ b/Build/source/utils/xz-4.999.9beta/tests/files/good-0catpad-empty.xz
Binary files differ
diff --git a/Build/source/utils/xz-4.999.8beta/tests/files/good-0pad-empty.xz b/Build/source/utils/xz-4.999.9beta/tests/files/good-0pad-empty.xz
index c51e3a69c0d..c51e3a69c0d 100644
--- a/Build/source/utils/xz-4.999.8beta/tests/files/good-0pad-empty.xz
+++ b/Build/source/utils/xz-4.999.9beta/tests/files/good-0pad-empty.xz
Binary files differ
diff --git a/Build/source/utils/xz-4.999.8beta/tests/files/good-1-3delta-lzma2.xz b/Build/source/utils/xz-4.999.9beta/tests/files/good-1-3delta-lzma2.xz
index a0be1d007a2..a0be1d007a2 100644
--- a/Build/source/utils/xz-4.999.8beta/tests/files/good-1-3delta-lzma2.xz
+++ b/Build/source/utils/xz-4.999.9beta/tests/files/good-1-3delta-lzma2.xz
Binary files differ
diff --git a/Build/source/utils/xz-4.999.8beta/tests/files/good-1-block_header-1.xz b/Build/source/utils/xz-4.999.9beta/tests/files/good-1-block_header-1.xz
index fea5ad2f998..fea5ad2f998 100644
--- a/Build/source/utils/xz-4.999.8beta/tests/files/good-1-block_header-1.xz
+++ b/Build/source/utils/xz-4.999.9beta/tests/files/good-1-block_header-1.xz
Binary files differ
diff --git a/Build/source/utils/xz-4.999.8beta/tests/files/good-1-block_header-2.xz b/Build/source/utils/xz-4.999.9beta/tests/files/good-1-block_header-2.xz
index 6b5dcb347b2..6b5dcb347b2 100644
--- a/Build/source/utils/xz-4.999.8beta/tests/files/good-1-block_header-2.xz
+++ b/Build/source/utils/xz-4.999.9beta/tests/files/good-1-block_header-2.xz
Binary files differ
diff --git a/Build/source/utils/xz-4.999.8beta/tests/files/good-1-block_header-3.xz b/Build/source/utils/xz-4.999.9beta/tests/files/good-1-block_header-3.xz
index 15653120634..15653120634 100644
--- a/Build/source/utils/xz-4.999.8beta/tests/files/good-1-block_header-3.xz
+++ b/Build/source/utils/xz-4.999.9beta/tests/files/good-1-block_header-3.xz
Binary files differ
diff --git a/Build/source/utils/xz-4.999.8beta/tests/files/good-1-check-crc32.xz b/Build/source/utils/xz-4.999.9beta/tests/files/good-1-check-crc32.xz
index 6c89593d447..6c89593d447 100644
--- a/Build/source/utils/xz-4.999.8beta/tests/files/good-1-check-crc32.xz
+++ b/Build/source/utils/xz-4.999.9beta/tests/files/good-1-check-crc32.xz
Binary files differ
diff --git a/Build/source/utils/xz-4.999.8beta/tests/files/good-1-check-crc64.xz b/Build/source/utils/xz-4.999.9beta/tests/files/good-1-check-crc64.xz
index 5a9915d2f9f..5a9915d2f9f 100644
--- a/Build/source/utils/xz-4.999.8beta/tests/files/good-1-check-crc64.xz
+++ b/Build/source/utils/xz-4.999.9beta/tests/files/good-1-check-crc64.xz
Binary files differ
diff --git a/Build/source/utils/xz-4.999.8beta/tests/files/good-1-check-none.xz b/Build/source/utils/xz-4.999.9beta/tests/files/good-1-check-none.xz
index 1e85faf3d06..1e85faf3d06 100644
--- a/Build/source/utils/xz-4.999.8beta/tests/files/good-1-check-none.xz
+++ b/Build/source/utils/xz-4.999.9beta/tests/files/good-1-check-none.xz
Binary files differ
diff --git a/Build/source/utils/xz-4.999.8beta/tests/files/good-1-check-sha256.xz b/Build/source/utils/xz-4.999.9beta/tests/files/good-1-check-sha256.xz
index fdc556b602c..fdc556b602c 100644
--- a/Build/source/utils/xz-4.999.8beta/tests/files/good-1-check-sha256.xz
+++ b/Build/source/utils/xz-4.999.9beta/tests/files/good-1-check-sha256.xz
Binary files differ
diff --git a/Build/source/utils/xz-4.999.8beta/tests/files/good-1-delta-lzma2.tiff.xz b/Build/source/utils/xz-4.999.9beta/tests/files/good-1-delta-lzma2.tiff.xz
index 1f033bc52b5..1f033bc52b5 100644
--- a/Build/source/utils/xz-4.999.8beta/tests/files/good-1-delta-lzma2.tiff.xz
+++ b/Build/source/utils/xz-4.999.9beta/tests/files/good-1-delta-lzma2.tiff.xz
Binary files differ
diff --git a/Build/source/utils/xz-4.999.8beta/tests/files/good-1-lzma2-1.xz b/Build/source/utils/xz-4.999.9beta/tests/files/good-1-lzma2-1.xz
index d8d6489c872..d8d6489c872 100644
--- a/Build/source/utils/xz-4.999.8beta/tests/files/good-1-lzma2-1.xz
+++ b/Build/source/utils/xz-4.999.9beta/tests/files/good-1-lzma2-1.xz
Binary files differ
diff --git a/Build/source/utils/xz-4.999.8beta/tests/files/good-1-lzma2-2.xz b/Build/source/utils/xz-4.999.9beta/tests/files/good-1-lzma2-2.xz
index 7e8cdf1b7d0..7e8cdf1b7d0 100644
--- a/Build/source/utils/xz-4.999.8beta/tests/files/good-1-lzma2-2.xz
+++ b/Build/source/utils/xz-4.999.9beta/tests/files/good-1-lzma2-2.xz
Binary files differ
diff --git a/Build/source/utils/xz-4.999.8beta/tests/files/good-1-lzma2-3.xz b/Build/source/utils/xz-4.999.9beta/tests/files/good-1-lzma2-3.xz
index c4c72be6561..c4c72be6561 100644
--- a/Build/source/utils/xz-4.999.8beta/tests/files/good-1-lzma2-3.xz
+++ b/Build/source/utils/xz-4.999.9beta/tests/files/good-1-lzma2-3.xz
Binary files differ
diff --git a/Build/source/utils/xz-4.999.8beta/tests/files/good-1-lzma2-4.xz b/Build/source/utils/xz-4.999.9beta/tests/files/good-1-lzma2-4.xz
index e0d623a001c..e0d623a001c 100644
--- a/Build/source/utils/xz-4.999.8beta/tests/files/good-1-lzma2-4.xz
+++ b/Build/source/utils/xz-4.999.9beta/tests/files/good-1-lzma2-4.xz
Binary files differ
diff --git a/Build/source/utils/xz-4.999.8beta/tests/files/good-1-sparc-lzma2.xz b/Build/source/utils/xz-4.999.9beta/tests/files/good-1-sparc-lzma2.xz
index 4532bc61c1a..4532bc61c1a 100644
--- a/Build/source/utils/xz-4.999.8beta/tests/files/good-1-sparc-lzma2.xz
+++ b/Build/source/utils/xz-4.999.9beta/tests/files/good-1-sparc-lzma2.xz
Binary files differ
diff --git a/Build/source/utils/xz-4.999.8beta/tests/files/good-1-x86-lzma2.xz b/Build/source/utils/xz-4.999.9beta/tests/files/good-1-x86-lzma2.xz
index 8053917bad7..8053917bad7 100644
--- a/Build/source/utils/xz-4.999.8beta/tests/files/good-1-x86-lzma2.xz
+++ b/Build/source/utils/xz-4.999.9beta/tests/files/good-1-x86-lzma2.xz
Binary files differ
diff --git a/Build/source/utils/xz-4.999.8beta/tests/files/good-2-lzma2.xz b/Build/source/utils/xz-4.999.9beta/tests/files/good-2-lzma2.xz
index bed5085c1f6..bed5085c1f6 100644
--- a/Build/source/utils/xz-4.999.8beta/tests/files/good-2-lzma2.xz
+++ b/Build/source/utils/xz-4.999.9beta/tests/files/good-2-lzma2.xz
Binary files differ
diff --git a/Build/source/utils/xz-4.999.8beta/tests/files/unsupported-block_header.xz b/Build/source/utils/xz-4.999.9beta/tests/files/unsupported-block_header.xz
index 38304429d91..38304429d91 100644
--- a/Build/source/utils/xz-4.999.8beta/tests/files/unsupported-block_header.xz
+++ b/Build/source/utils/xz-4.999.9beta/tests/files/unsupported-block_header.xz
Binary files differ
diff --git a/Build/source/utils/xz-4.999.8beta/tests/files/unsupported-check.xz b/Build/source/utils/xz-4.999.9beta/tests/files/unsupported-check.xz
index c28355e7474..c28355e7474 100644
--- a/Build/source/utils/xz-4.999.8beta/tests/files/unsupported-check.xz
+++ b/Build/source/utils/xz-4.999.9beta/tests/files/unsupported-check.xz
Binary files differ
diff --git a/Build/source/utils/xz-4.999.8beta/tests/files/unsupported-filter_flags-1.xz b/Build/source/utils/xz-4.999.9beta/tests/files/unsupported-filter_flags-1.xz
index 48b93731c52..48b93731c52 100644
--- a/Build/source/utils/xz-4.999.8beta/tests/files/unsupported-filter_flags-1.xz
+++ b/Build/source/utils/xz-4.999.9beta/tests/files/unsupported-filter_flags-1.xz
Binary files differ
diff --git a/Build/source/utils/xz-4.999.8beta/tests/files/unsupported-filter_flags-2.xz b/Build/source/utils/xz-4.999.9beta/tests/files/unsupported-filter_flags-2.xz
index c283359d562..c283359d562 100644
--- a/Build/source/utils/xz-4.999.8beta/tests/files/unsupported-filter_flags-2.xz
+++ b/Build/source/utils/xz-4.999.9beta/tests/files/unsupported-filter_flags-2.xz
Binary files differ
diff --git a/Build/source/utils/xz-4.999.8beta/tests/files/unsupported-filter_flags-3.xz b/Build/source/utils/xz-4.999.9beta/tests/files/unsupported-filter_flags-3.xz
index 26084984f97..26084984f97 100644
--- a/Build/source/utils/xz-4.999.8beta/tests/files/unsupported-filter_flags-3.xz
+++ b/Build/source/utils/xz-4.999.9beta/tests/files/unsupported-filter_flags-3.xz
Binary files differ
diff --git a/Build/source/utils/xz-4.999.8beta/tests/test_block_header.c b/Build/source/utils/xz-4.999.9beta/tests/test_block_header.c
index 2fb22a5a83e..a95792eb9dd 100644
--- a/Build/source/utils/xz-4.999.8beta/tests/test_block_header.c
+++ b/Build/source/utils/xz-4.999.9beta/tests/test_block_header.c
@@ -3,17 +3,10 @@
/// \file test_block_header.c
/// \brief Tests Block Header coders
//
-// Copyright (C) 2007 Lasse Collin
+// Author: Lasse Collin
//
-// This library is free software; you can redistribute it and/or
-// modify it under the terms of the GNU Lesser General Public
-// License as published by the Free Software Foundation; either
-// version 2.1 of the License, or (at your option) any later version.
-//
-// This library is distributed in the hope that it will be useful,
-// but WITHOUT ANY WARRANTY; without even the implied warranty of
-// MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the GNU
-// Lesser General Public License for more details.
+// This file has been put into the public domain.
+// You can do whatever you want with this file.
//
///////////////////////////////////////////////////////////////////////////////
diff --git a/Build/source/utils/xz-4.999.8beta/tests/test_check.c b/Build/source/utils/xz-4.999.9beta/tests/test_check.c
index cb6b8ec1dd0..7d4a36078cf 100644
--- a/Build/source/utils/xz-4.999.8beta/tests/test_check.c
+++ b/Build/source/utils/xz-4.999.9beta/tests/test_check.c
@@ -5,17 +5,10 @@
///
/// \todo Add SHA256
//
-// Copyright (C) 2007 Lasse Collin
+// Author: Lasse Collin
//
-// This library is free software; you can redistribute it and/or
-// modify it under the terms of the GNU Lesser General Public
-// License as published by the Free Software Foundation; either
-// version 2.1 of the License, or (at your option) any later version.
-//
-// This library is distributed in the hope that it will be useful,
-// but WITHOUT ANY WARRANTY; without even the implied warranty of
-// MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the GNU
-// Lesser General Public License for more details.
+// This file has been put into the public domain.
+// You can do whatever you want with this file.
//
///////////////////////////////////////////////////////////////////////////////
diff --git a/Build/source/utils/xz-4.999.8beta/tests/test_compress.sh b/Build/source/utils/xz-4.999.9beta/tests/test_compress.sh
index 975c1f1571d..ff0cb304df4 100755
--- a/Build/source/utils/xz-4.999.8beta/tests/test_compress.sh
+++ b/Build/source/utils/xz-4.999.9beta/tests/test_compress.sh
@@ -2,17 +2,10 @@
###############################################################################
#
-# Copyright (C) 2008 Lasse Collin
+# Author: Lasse Collin
#
-# This library is free software; you can redistribute it and/or
-# modify it under the terms of the GNU Lesser General Public
-# License as published by the Free Software Foundation; either
-# version 2.1 of the License, or (at your option) any later version.
-#
-# This library is distributed in the hope that it will be useful,
-# but WITHOUT ANY WARRANTY; without even the implied warranty of
-# MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the GNU
-# Lesser General Public License for more details.
+# This file has been put into the public domain.
+# You can do whatever you want with this file.
#
###############################################################################
diff --git a/Build/source/utils/xz-4.999.9beta/tests/test_files.sh b/Build/source/utils/xz-4.999.9beta/tests/test_files.sh
new file mode 100755
index 00000000000..7dd9a3901bf
--- /dev/null
+++ b/Build/source/utils/xz-4.999.9beta/tests/test_files.sh
@@ -0,0 +1,33 @@
+#/bin/sh
+
+###############################################################################
+#
+# Author: Lasse Collin
+#
+# This file has been put into the public domain.
+# You can do whatever you want with this file.
+#
+###############################################################################
+
+for I in "$srcdir"/files/good-*.xz
+do
+ if ../src/xzdec/xzdec "$I" > /dev/null 2> /dev/null ; then
+ :
+ else
+ echo "Good file failed: $I"
+ (exit 1)
+ exit 1
+ fi
+done
+
+for I in "$srcdir"/files/bad-*.xz
+do
+ if ../src/xzdec/xzdec "$I" > /dev/null 2> /dev/null ; then
+ echo "Bad file succeeded: $I"
+ (exit 1)
+ exit 1
+ fi
+done
+
+(exit 0)
+exit 0
diff --git a/Build/source/utils/xz-4.999.8beta/tests/test_filter_flags.c b/Build/source/utils/xz-4.999.9beta/tests/test_filter_flags.c
index 37bb5830b7c..808682b57e0 100644
--- a/Build/source/utils/xz-4.999.8beta/tests/test_filter_flags.c
+++ b/Build/source/utils/xz-4.999.9beta/tests/test_filter_flags.c
@@ -3,17 +3,10 @@
/// \file test_filter_flags.c
/// \brief Tests Filter Flags coders
//
-// Copyright (C) 2007 Lasse Collin
+// Author: Lasse Collin
//
-// This library is free software; you can redistribute it and/or
-// modify it under the terms of the GNU Lesser General Public
-// License as published by the Free Software Foundation; either
-// version 2.1 of the License, or (at your option) any later version.
-//
-// This library is distributed in the hope that it will be useful,
-// but WITHOUT ANY WARRANTY; without even the implied warranty of
-// MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the GNU
-// Lesser General Public License for more details.
+// This file has been put into the public domain.
+// You can do whatever you want with this file.
//
///////////////////////////////////////////////////////////////////////////////
diff --git a/Build/source/utils/xz-4.999.8beta/tests/test_index.c b/Build/source/utils/xz-4.999.9beta/tests/test_index.c
index bd2aecdeec5..5ce2c524735 100644
--- a/Build/source/utils/xz-4.999.8beta/tests/test_index.c
+++ b/Build/source/utils/xz-4.999.9beta/tests/test_index.c
@@ -3,17 +3,10 @@
/// \file test_index.c
/// \brief Tests functions handling the lzma_index structure
//
-// Copyright (C) 2007-2008 Lasse Collin
+// Author: Lasse Collin
//
-// This library is free software; you can redistribute it and/or
-// modify it under the terms of the GNU Lesser General Public
-// License as published by the Free Software Foundation; either
-// version 2.1 of the License, or (at your option) any later version.
-//
-// This library is distributed in the hope that it will be useful,
-// but WITHOUT ANY WARRANTY; without even the implied warranty of
-// MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the GNU
-// Lesser General Public License for more details.
+// This file has been put into the public domain.
+// You can do whatever you want with this file.
//
///////////////////////////////////////////////////////////////////////////////
diff --git a/Build/source/utils/xz-4.999.8beta/tests/test_stream_flags.c b/Build/source/utils/xz-4.999.9beta/tests/test_stream_flags.c
index a82a20b560d..9c86c6b860a 100644
--- a/Build/source/utils/xz-4.999.8beta/tests/test_stream_flags.c
+++ b/Build/source/utils/xz-4.999.9beta/tests/test_stream_flags.c
@@ -3,17 +3,10 @@
/// \file test_stream_flags.c
/// \brief Tests Stream Header and Stream Footer coders
//
-// Copyright (C) 2007 Lasse Collin
+// Author: Lasse Collin
//
-// This library is free software; you can redistribute it and/or
-// modify it under the terms of the GNU Lesser General Public
-// License as published by the Free Software Foundation; either
-// version 2.1 of the License, or (at your option) any later version.
-//
-// This library is distributed in the hope that it will be useful,
-// but WITHOUT ANY WARRANTY; without even the implied warranty of
-// MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the GNU
-// Lesser General Public License for more details.
+// This file has been put into the public domain.
+// You can do whatever you want with this file.
//
///////////////////////////////////////////////////////////////////////////////
diff --git a/Build/source/utils/xz-4.999.8beta/tests/tests.h b/Build/source/utils/xz-4.999.9beta/tests/tests.h
index 66214afd90a..185a6820058 100644
--- a/Build/source/utils/xz-4.999.8beta/tests/tests.h
+++ b/Build/source/utils/xz-4.999.9beta/tests/tests.h
@@ -3,17 +3,10 @@
/// \file tests.h
/// \brief Common definitions for test applications
//
-// Copyright (C) 2006 Lasse Collin
+// Author: Lasse Collin
//
-// This program is free software; you can redistribute it and/or modify
-// it under the terms of the GNU General Public License as published by
-// the Free Software Foundation; either version 2 of the License, or
-// (at your option) any later version.
-//
-// This program is distributed in the hope that it will be useful,
-// but WITHOUT ANY WARRANTY; without even the implied warranty of
-// MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
-// GNU General Public License for more details.
+// This file has been put into the public domain.
+// You can do whatever you want with this file.
//
///////////////////////////////////////////////////////////////////////////////
diff --git a/Build/source/utils/xz-4.999.9beta/version.sh b/Build/source/utils/xz-4.999.9beta/version.sh
new file mode 100644
index 00000000000..40d04936288
--- /dev/null
+++ b/Build/source/utils/xz-4.999.9beta/version.sh
@@ -0,0 +1,24 @@
+#!/bin/sh
+#
+#############################################################################
+#
+# Get the version string from version.h and print it out without
+# trailing newline. This makes it suitable for use in configure.ac.
+#
+#############################################################################
+#
+# Author: Lasse Collin
+#
+# This file has been put into the public domain.
+# You can do whatever you want with this file.
+#
+#############################################################################
+
+sed -n 's/LZMA_VERSION_STABILITY_ALPHA/alpha/
+ s/LZMA_VERSION_STABILITY_BETA/beta/
+ s/LZMA_VERSION_STABILITY_STABLE//
+ s/^#define LZMA_VERSION_[MPS][AIT][AJNT][A-Z]* //p' \
+ src/liblzma/api/lzma/version.h \
+ | tr '\n' '|' \
+ | sed 's/|/./; s/|/./; s/|//g' \
+ | tr -d '\n'
diff --git a/Build/source/utils/xz-4.999.8beta/windows/Makefile b/Build/source/utils/xz-4.999.9beta/windows/Makefile
index c4c036c1006..db362ef22a1 100644
--- a/Build/source/utils/xz-4.999.8beta/windows/Makefile
+++ b/Build/source/utils/xz-4.999.9beta/windows/Makefile
@@ -11,9 +11,7 @@
# W64=1 Build for 64-bit Windows. Make sure that you have 64-bit
# MinGW in PATH.
#
-# STATIC=1 TODO: Build static library instead of a DLL.
-#
-# WINE=1 Shortcut to set CC and STRIP to use Wine to run Windows
+# WINE=1 Shortcut to set CC, AR, and STRIP to use Wine to run Windows
# versions of MinGW binaries.
#
# The usual CPPFLAGS and CFLAGS are supported too.
@@ -29,9 +27,13 @@
ifdef W64
CC = x86_64-pc-mingw32-gcc
+WINDRES = x86_64-pc-mingw32-windres
+AR = x86_64-pc-mingw32-ar
STRIP = x86_64-pc-mingw32-strip
else
CC = mingw32-gcc
+WINDRES = windres
+AR = ar
STRIP = strip
endif
@@ -64,15 +66,19 @@ ALL_CPPFLAGS += -DHAVE_CONFIG_H
ifdef WINE
ifdef W64
CC := wine c:/MinGW64/bin/x86_64-pc-mingw32-gcc
+WINDRES := wine c:/MinGW64/bin/x86_64-pc-mingw32-windres
+AR := wine c:/MinGW64/bin/x86_64-pc-mingw32-ar
STRIP := wine c:/MinGW64/bin/x86_64-pc-mingw32-strip
else
CC := wine c:/MinGW/bin/gcc
+WINDRES := wine c:/MinGW/bin/windres
+AR := wine c:/MinGW/bin/ar
STRIP := wine c:/MinGW/bin/strip
endif
endif
ifdef DEBUG
-# Use echo since it works for this purporse on both Windows and POSIX.
+# Use echo since it works for this purpose on both Windows and POSIX.
STRIP := echo Skipping strip
else
ALL_CPPFLAGS += -DNDEBUG
@@ -87,22 +93,28 @@ ALL_CFLAGS += $(CFLAGS)
################
.PHONY: all clean pkg
-all: liblzma.dll xzdec.exe lzmadec.exe xz.exe
+all: liblzma xzdec xz
clean: liblzma-clean xzdec-clean xz-clean
pkg: all
$(RM) -r pkg
$(MKDIR) -p pkg/lib pkg/include/lzma
- $(CP) liblzma.dll xz.exe xzdec.exe lzmadec.exe pkg
- $(CP) liblzma.a liblzma.def pkg/lib
+ $(CP) liblzma.dll xz-dynamic.exe xz.exe xzdec-dynamic.exe xzdec.exe lzmadec-dynamic.exe lzmadec.exe pkg
+ $(CP) liblzma.a liblzma.def liblzma_static.lib pkg/lib
$(CP) ../src/liblzma/api/lzma.h pkg/include
$(CP) ../src/liblzma/api/lzma/*.h pkg/include/lzma
+%.o: %.rc
+ $(WINDRES) $(ALL_CPPFLAGS) $< $@
+
###############
# liblzma.dll #
###############
+.PHONY: liblzma
+liblzma: liblzma.dll liblzma_static.lib
+
LIBLZMA_SRCS_C = \
../src/liblzma/common/alone_decoder.c \
../src/liblzma/common/alone_encoder.c \
@@ -115,7 +127,13 @@ LIBLZMA_SRCS_C = \
../src/liblzma/common/block_header_encoder.c \
../src/liblzma/common/block_util.c \
../src/liblzma/common/common.c \
- ../src/liblzma/common/easy.c \
+ ../src/liblzma/common/easy_buffer_encoder.c \
+ ../src/liblzma/common/easy_decoder_memusage.c \
+ ../src/liblzma/common/easy_encoder.c \
+ ../src/liblzma/common/easy_encoder_memusage.c \
+ ../src/liblzma/common/easy_preset.c \
+ ../src/liblzma/common/filter_buffer_decoder.c \
+ ../src/liblzma/common/filter_buffer_encoder.c \
../src/liblzma/common/filter_common.c \
../src/liblzma/common/filter_decoder.c \
../src/liblzma/common/filter_encoder.c \
@@ -144,7 +162,6 @@ LIBLZMA_SRCS_C = \
../src/liblzma/lz/lz_encoder.c \
../src/liblzma/lz/lz_encoder_mf.c \
../src/liblzma/lzma/fastpos_table.c \
- ../src/liblzma/lzma/fastpos_tablegen.c \
../src/liblzma/lzma/lzma2_decoder.c \
../src/liblzma/lzma/lzma2_encoder.c \
../src/liblzma/lzma/lzma_decoder.c \
@@ -179,77 +196,113 @@ endif
LIBLZMA_OBJS_C = $(LIBLZMA_SRCS_C:.c=.o)
LIBLZMA_OBJS_ASM = $(LIBLZMA_SRCS_ASM:.S=.o)
-LIBLZMA_OBJS = $(LIBLZMA_OBJS_C) $(LIBLZMA_OBJS_ASM)
+LIBLZMA_OBJS = \
+ $(LIBLZMA_OBJS_C) \
+ $(LIBLZMA_OBJS_ASM) \
+ ../src/liblzma/liblzma_w32res.o
+
+LIBLZMA_OBJS_STATIC_C = $(LIBLZMA_SRCS_C:.c=-static.o)
+LIBLZMA_OBJS_STATIC_ASM = $(LIBLZMA_SRCS_ASM:.S=-static.o)
+LIBLZMA_OBJS_STATIC = $(LIBLZMA_OBJS_STATIC_C) $(LIBLZMA_OBJS_STATIC_ASM)
# The sed is needed to remove ordinals from the .def file. I'm not going
# to track the ordinal numbers, so people should link against liblzma.dll
# only by using symbol names.
liblzma.dll: $(LIBLZMA_OBJS)
- $(CC) $(ALL_CPPFLAGS) $(ALL_CFLAGS) -shared -o liblzma.dll $(LIBLZMA_OBJS) -Wl,--out-implib,liblzma.a,--output-def,liblzma.def.in
+ $(CC) $(ALL_CFLAGS) -shared -o liblzma.dll $(LIBLZMA_OBJS) -Wl,--out-implib,liblzma.a,--output-def,liblzma.def.in
$(SED) 's/ \+@ *[0-9]\+//' liblzma.def.in > liblzma.def
$(RM) liblzma.def.in
$(STRIP) --strip-unneeded liblzma.a
$(STRIP) --strip-all liblzma.dll
$(LIBLZMA_OBJS_C): %.o: %.c
- $(CC) $(ALL_CPPFLAGS) $(ALL_CFLAGS) -c -o $@ $<
+ $(CC) -DDLL_EXPORT $(ALL_CPPFLAGS) $(ALL_CFLAGS) -c -o $@ $<
$(LIBLZMA_OBJS_ASM): %.o: %.S
+ $(CC) -DDLL_EXPORT $(ALL_CPPFLAGS) $(ALL_CFLAGS) -c -o $@ $<
+
+liblzma_static.lib: $(LIBLZMA_OBJS_STATIC)
+ $(RM) $@
+ $(AR) rcs $@ $(LIBLZMA_OBJS_STATIC)
+ $(STRIP) --strip-unneeded $@
+
+$(LIBLZMA_OBJS_STATIC_C): %-static.o: %.c
+ $(CC) $(ALL_CPPFLAGS) $(ALL_CFLAGS) -c -o $@ $<
+
+$(LIBLZMA_OBJS_STATIC_ASM): %-static.o: %.S
$(CC) $(ALL_CPPFLAGS) $(ALL_CFLAGS) -c -o $@ $<
.PHONY: liblzma-clean
liblzma-clean:
- -$(RM) $(LIBLZMA_OBJS) liblzma.def.in liblzma.def liblzma.a liblzma.dll
+ -$(RM) $(LIBLZMA_OBJS) $(LIBLZMA_OBJS_STATIC) liblzma.def.in liblzma.def liblzma.a liblzma.dll liblzma_static.lib
###########################
# xzdec.exe & lzmadec.exe #
###########################
+.PHONY: xzdec
+xzdec: xzdec-dynamic.exe lzmadec-dynamic.exe xzdec.exe lzmadec.exe
+
XZDEC_SRCS = ../src/xzdec/xzdec.c
-xzdec.exe: liblzma.dll $(XZDEC_SRCS)
- $(CC) $(ALL_CPPFLAGS) $(ALL_CFLAGS) $(XZDEC_SRCS) -o xzdec.exe liblzma.a
- $(STRIP) --strip-all xzdec.exe
+xzdec-dynamic.exe: liblzma.dll $(XZDEC_SRCS) ../src/xzdec/xzdec_w32res.o
+ $(CC) $(ALL_CPPFLAGS) $(ALL_CFLAGS) $(XZDEC_SRCS) ../src/xzdec/xzdec_w32res.o -o $@ liblzma.a
+ $(STRIP) --strip-all $@
+
+lzmadec-dynamic.exe: liblzma.dll $(XZDEC_SRCS) ../src/xzdec/lzmadec_w32res.o
+ $(CC) $(ALL_CPPFLAGS) -DLZMADEC $(ALL_CFLAGS) $(XZDEC_SRCS) ../src/xzdec/lzmadec_w32res.o -o $@ liblzma.a
+ $(STRIP) --strip-all $@
+
+xzdec.exe: liblzma_static.lib $(XZDEC_SRCS) ../src/xzdec/xzdec_w32res.o
+ $(CC) -DLZMA_API_STATIC $(ALL_CPPFLAGS) $(ALL_CFLAGS) $(XZDEC_SRCS) ../src/xzdec/xzdec_w32res.o -o $@ liblzma_static.lib
+ $(STRIP) --strip-all $@
-lzmadec.exe: liblzma.dll $(XZDEC_SRCS)
- $(CC) $(ALL_CPPFLAGS) $(ALL_CFLAGS) -DLZMADEC $(XZDEC_SRCS) -o lzmadec.exe liblzma.a
- $(STRIP) --strip-all lzmadec.exe
+lzmadec.exe: liblzma_static.lib $(XZDEC_SRCS) ../src/xzdec/lzmadec_w32res.o
+ $(CC) -DLZMA_API_STATIC $(ALL_CPPFLAGS) -DLZMADEC $(ALL_CFLAGS) $(XZDEC_SRCS) ../src/xzdec/lzmadec_w32res.o -o $@ liblzma_static.lib
+ $(STRIP) --strip-all $@
.PHONY: xzdec-clean
xzdec-clean:
- -$(RM) xzdec.exe lzmadec.exe
+ -$(RM) xzdec-dynamic.exe lzmadec-dynamic.exe xzdec.exe lzmadec.exe ../src/xzdec/xzdec_w32res.o ../src/xzdec/lzmadec_w32res.o
##########
# xz.exe #
##########
+.PHONY: xz
+xz: xz-dynamic.exe xz.exe
+
XZ_SRCS = \
../src/xz/args.c \
+ ../src/xz/coder.c \
+ ../src/xz/file_io.c \
../src/xz/hardware.c \
- ../src/xz/io.c \
../src/xz/main.c \
../src/xz/message.c \
../src/xz/options.c \
- ../src/xz/process.c \
../src/xz/signals.c \
../src/xz/suffix.c \
../src/xz/util.c
XZ_OBJS = $(XZ_SRCS:.c=.o)
+XZ_OBJS_STATIC = $(XZ_SRCS:.c=-static.o)
-# We need to "fix" the source files which use ' as format character
-# in printf() to get thousand separators. Windows doesn't support it.
-# It's not in C89 or C99, but it is in POSIX.
$(XZ_OBJS): %.o: %.c
- $(SED) "s/%'/%/g" $< > $(<:.c=-fixed.c)
- $(CC) $(ALL_CPPFLAGS) $(ALL_CFLAGS) -c -o $@ $(<:.c=-fixed.c)
+ $(CC) $(ALL_CPPFLAGS) $(ALL_CFLAGS) -c -o $@ $<
+
+xz-dynamic.exe: liblzma.dll $(XZ_OBJS) ../src/xz/xz_w32res.o
+ $(CC) $(ALL_CFLAGS) $(XZ_OBJS) ../src/xz/xz_w32res.o -o $@ liblzma.a
+ $(STRIP) --strip-all $@
+
+$(XZ_OBJS_STATIC): %-static.o: %.c
+ $(CC) -DLZMA_API_STATIC $(ALL_CPPFLAGS) $(ALL_CFLAGS) -c -o $@ $<
-xz.exe: $(XZ_OBJS)
- $(CC) $(ALL_CFLAGS) $(XZ_OBJS) -o xz.exe liblzma.a
- $(STRIP) --strip-all xz.exe
+xz.exe: liblzma_static.lib $(XZ_OBJS_STATIC) ../src/xz/xz_w32res.o
+ $(CC) $(ALL_CFLAGS) $(XZ_OBJS_STATIC) ../src/xz/xz_w32res.o -o $@ liblzma_static.lib
+ $(STRIP) --strip-all $@
.PHONY: xz-clean
xz-clean:
- -$(RM) $(XZ_OBJS) $(XZ_SRCS:.c=-fixed.c) xz.exe
+ -$(RM) $(XZ_OBJS) $(XZ_OBJS_STATIC) ../src/xz/xz_w32res.o xz-dynamic.exe xz.exe
diff --git a/Build/source/utils/xz-4.999.8beta/windows/README b/Build/source/utils/xz-4.999.9beta/windows/README
index dddbbe1d35c..0e529de9f05 100644
--- a/Build/source/utils/xz-4.999.8beta/windows/README
+++ b/Build/source/utils/xz-4.999.9beta/windows/README
@@ -99,14 +99,6 @@ Additional Make Flags and Targets
mingw32-make DEBUG=1 CFLAGS="-g -O0"
- By default, liblzma is built as a DLL and the command line tools
- linked dynamically against that liblzma.dll. To build static
- versions instead, use STATIC=1:
-
- mingw32-make STATIC=1
-
- TODO: Static build is not implemented yet.
-
To copy the built binaries and required headers into a clean
directory, use the pkg target:
@@ -137,8 +129,6 @@ To Do
- Test Win64 support and add instructions about getting x86-64
version of MinGW.
- - Static liblzma and statically linked command line tools
-
- Creating the import library for other compilers/linkers
- Building with other compilers for Windows
diff --git a/Build/source/utils/xz-4.999.8beta/windows/config.h b/Build/source/utils/xz-4.999.9beta/windows/config.h
index 4a055e8cdef..4d3371348db 100644
--- a/Build/source/utils/xz-4.999.8beta/windows/config.h
+++ b/Build/source/utils/xz-4.999.9beta/windows/config.h
@@ -140,24 +140,12 @@
/* Define to 1 if the system has the type `_Bool'. */
#define HAVE__BOOL 1
-/* Name of package */
-#define PACKAGE "xz"
-
/* Define to the address where bug reports for this package should be sent. */
#define PACKAGE_BUGREPORT "lasse.collin@tukaani.org"
/* Define to the full name of this package. */
#define PACKAGE_NAME "XZ Utils"
-/* Define to the full name and version of this package. */
-#define PACKAGE_STRING "XZ Utils 4.999.8beta"
-
-/* Define to the one symbol short name of this package. */
-#define PACKAGE_TARNAME "xz"
-
-/* Define to the version of this package. */
-#define PACKAGE_VERSION "4.999.8beta"
-
/* The size of `size_t', as computed by sizeof. */
#ifdef _WIN64
# define SIZEOF_SIZE_T 8
@@ -168,9 +156,6 @@
/* Define to 1 if you have the ANSI C header files. */
#define STDC_HEADERS 1
-/* Version number of package */
-#define VERSION "4.999.8beta"
-
/* Define WORDS_BIGENDIAN to 1 if your processor stores words with the most
significant byte first (like Motorola and SPARC, unlike Intel and VAX). */
#if defined __BIG_ENDIAN__