timestamps

git-svn-id: svn://tug.org/texlive/trunk@12471 c570f23f-e606-0410-a88d-b1316a301751

6 files changed, 31 insertions, 1576 deletions

diff --git a/Build/source/texk/lacheck/Makefile.am b/Build/source/texk/lacheck/Makefile.am
index 143f2c07d4f..b86f725aa5d 100644
--- a/Build/source/texk/lacheck/Makefile.am
+++ b/Build/source/texk/lacheck/Makefile.am
@@ -1,11 +1,6 @@
 ##
 ACLOCAL_AMFLAGS = -I ../../m4
 
-INCLUDES = $(KPATHSEA_INCLUDES)
-AM_CPPFLAGS = -DKPATHSEA -DUNIX  -DNeedFunctionPrototypes
-
-DISTCLEANFILES = detex-sed.l
-
 bin_PROGRAMS = lacheck
 
 lacheck_SOURCES = lacheck.l
@@ -31,10 +26,7 @@ EXTRA_DIST += test.tex test.out
 
 CLEANFILES += test.xout
 
-## Rebuild libkpathsea
-@KPATHSEA_RULE@
-
-## Not yet used
+## Not used
 ##
 EXTRA_DIST += lacheck.hlp make_vms.com
 
diff --git a/Build/source/texk/lacheck/Makefile.in b/Build/source/texk/lacheck/Makefile.in
index 2ffed0d1aa0..6688be9575f 100644
--- a/Build/source/texk/lacheck/Makefile.in
+++ b/Build/source/texk/lacheck/Makefile.in
@@ -42,7 +42,7 @@ DIST_COMMON = $(am__configure_deps) $(dist_check_SCRIPTS) \
 	$(srcdir)/../../build-aux/ltmain.sh \
 	$(srcdir)/../../build-aux/missing \
 	$(srcdir)/../../build-aux/ylwrap $(srcdir)/Makefile.am \
-	$(srcdir)/Makefile.in $(srcdir)/c-auto.in \
+	$(srcdir)/Makefile.in $(srcdir)/config.h.in \
 	$(top_srcdir)/configure ../../build-aux/config.guess \
 	../../build-aux/config.sub ../../build-aux/depcomp \
 	../../build-aux/install-sh ../../build-aux/ltmain.sh \
@@ -50,7 +50,6 @@ DIST_COMMON = $(am__configure_deps) $(dist_check_SCRIPTS) \
 	../../build-aux/ylwrap ChangeLog lacheck.c
 ACLOCAL_M4 = $(top_srcdir)/aclocal.m4
 am__aclocal_m4_deps = $(top_srcdir)/../../m4/kpse-common.m4 \
-	$(top_srcdir)/../../m4/kpse-kpathsea-flags.m4 \
 	$(top_srcdir)/../../m4/kpse-lex.m4 \
 	$(top_srcdir)/../../m4/libtool.m4 \
 	$(top_srcdir)/../../m4/ltoptions.m4 \
@@ -63,7 +62,7 @@ am__configure_deps = $(am__aclocal_m4_deps) $(CONFIGURE_DEPENDENCIES) \
 am__CONFIG_DISTCLEAN_FILES = config.status config.cache config.log \
  configure.lineno config.status.lineno
 mkinstalldirs = $(install_sh) -d
-CONFIG_HEADER = c-auto.h
+CONFIG_HEADER = config.h
 CONFIG_CLEAN_FILES =
 am__installdirs = "$(DESTDIR)$(bindir)" "$(DESTDIR)$(man1dir)"
 binPROGRAMS_INSTALL = $(INSTALL_PROGRAM)
@@ -137,9 +136,6 @@ INSTALL_DATA = @INSTALL_DATA@
 INSTALL_PROGRAM = @INSTALL_PROGRAM@
 INSTALL_SCRIPT = @INSTALL_SCRIPT@
 INSTALL_STRIP_PROGRAM = @INSTALL_STRIP_PROGRAM@
-KPATHSEA_DEPEND = @KPATHSEA_DEPEND@
-KPATHSEA_INCLUDES = @KPATHSEA_INCLUDES@
-KPATHSEA_LIBS = @KPATHSEA_LIBS@
 LD = @LD@
 LDFLAGS = @LDFLAGS@
 LEX = @LEX@
@@ -227,9 +223,6 @@ top_build_prefix = @top_build_prefix@
 top_builddir = @top_builddir@
 top_srcdir = @top_srcdir@
 ACLOCAL_AMFLAGS = -I ../../m4
-INCLUDES = $(KPATHSEA_INCLUDES)
-AM_CPPFLAGS = -DKPATHSEA -DUNIX  -DNeedFunctionPrototypes
-DISTCLEANFILES = detex-sed.l
 lacheck_SOURCES = lacheck.l
 LDADD = $(LEXLIB)
 nodist_man1_MANS = lacheck.1
@@ -237,7 +230,7 @@ EXTRA_DIST = lacheck.man test.tex test.out lacheck.hlp make_vms.com
 CLEANFILES = lacheck.1 test.xout
 dist_check_SCRIPTS = lacheck.test
 TESTS = lacheck.test
-all: c-auto.h
+all: config.h
 	$(MAKE) $(AM_MAKEFLAGS) all-am
 
 .SUFFIXES:
@@ -276,22 +269,22 @@ $(top_srcdir)/configure: @MAINTAINER_MODE_TRUE@ $(am__configure_deps)
 $(ACLOCAL_M4): @MAINTAINER_MODE_TRUE@ $(am__aclocal_m4_deps)
 	cd $(srcdir) && $(ACLOCAL) $(ACLOCAL_AMFLAGS)
 
-c-auto.h: stamp-h1
+config.h: stamp-h1
 	@if test ! -f $@; then \
 	  rm -f stamp-h1; \
 	  $(MAKE) $(AM_MAKEFLAGS) stamp-h1; \
 	else :; fi
 
-stamp-h1: $(srcdir)/c-auto.in $(top_builddir)/config.status
+stamp-h1: $(srcdir)/config.h.in $(top_builddir)/config.status
 	@rm -f stamp-h1
-	cd $(top_builddir) && $(SHELL) ./config.status c-auto.h
-$(srcdir)/c-auto.in: @MAINTAINER_MODE_TRUE@ $(am__configure_deps) 
+	cd $(top_builddir) && $(SHELL) ./config.status config.h
+$(srcdir)/config.h.in: @MAINTAINER_MODE_TRUE@ $(am__configure_deps) 
 	cd $(top_srcdir) && $(AUTOHEADER)
 	rm -f stamp-h1
 	touch $@
 
 distclean-hdr:
-	-rm -f c-auto.h stamp-h1
+	-rm -f config.h stamp-h1
 install-binPROGRAMS: $(bin_PROGRAMS)
 	@$(NORMAL_INSTALL)
 	test -z "$(bindir)" || $(MKDIR_P) "$(DESTDIR)$(bindir)"
@@ -408,11 +401,11 @@ ID: $(HEADERS) $(SOURCES) $(LISP) $(TAGS_FILES)
 	mkid -fID $$unique
 tags: TAGS
 
-TAGS:  $(HEADERS) $(SOURCES) c-auto.in $(TAGS_DEPENDENCIES) \
+TAGS:  $(HEADERS) $(SOURCES) config.h.in $(TAGS_DEPENDENCIES) \
 		$(TAGS_FILES) $(LISP)
 	tags=; \
 	here=`pwd`; \
-	list='$(SOURCES) $(HEADERS) c-auto.in $(LISP) $(TAGS_FILES)'; \
+	list='$(SOURCES) $(HEADERS) config.h.in $(LISP) $(TAGS_FILES)'; \
 	unique=`for i in $$list; do \
 	    if test -f "$$i"; then echo $$i; else echo $(srcdir)/$$i; fi; \
 	  done | \
@@ -424,10 +417,10 @@ TAGS:  $(HEADERS) $(SOURCES) c-auto.in $(TAGS_DEPENDENCIES) \
 	    $$tags $$unique; \
 	fi
 ctags: CTAGS
-CTAGS:  $(HEADERS) $(SOURCES) c-auto.in $(TAGS_DEPENDENCIES) \
+CTAGS:  $(HEADERS) $(SOURCES) config.h.in $(TAGS_DEPENDENCIES) \
 		$(TAGS_FILES) $(LISP)
 	tags=; \
-	list='$(SOURCES) $(HEADERS) c-auto.in $(LISP) $(TAGS_FILES)'; \
+	list='$(SOURCES) $(HEADERS) config.h.in $(LISP) $(TAGS_FILES)'; \
 	unique=`for i in $$list; do \
 	    if test -f "$$i"; then echo $$i; else echo $(srcdir)/$$i; fi; \
 	  done | \
@@ -666,7 +659,7 @@ check-am: all-am
 	$(MAKE) $(AM_MAKEFLAGS) $(dist_check_SCRIPTS)
 	$(MAKE) $(AM_MAKEFLAGS) check-TESTS
 check: check-am
-all-am: Makefile $(PROGRAMS) $(MANS) c-auto.h
+all-am: Makefile $(PROGRAMS) $(MANS) config.h
 installdirs:
 	for dir in "$(DESTDIR)$(bindir)" "$(DESTDIR)$(man1dir)"; do \
 	  test -z "$$dir" || $(MKDIR_P) "$$dir"; \
@@ -692,7 +685,6 @@ clean-generic:
 
 distclean-generic:
 	-test -z "$(CONFIG_CLEAN_FILES)" || rm -f $(CONFIG_CLEAN_FILES)
-	-test -z "$(DISTCLEANFILES)" || rm -f $(DISTCLEANFILES)
 
 maintainer-clean-generic:
 	@echo "This command is intended for maintainers to use"
@@ -786,8 +778,6 @@ lacheck.1: lacheck.man
 	sed -e "s!%%LACHECKREV%%!Release $(REV)!" \
 	    -e "s!%%LACHECKDATE%%!`date +%Y-%m-%d`!" \
 	    -e "s!%%LACHECKPATH%%!lacheck!" $< > $@
-
-@KPATHSEA_RULE@
 # Tell versions [3.59,3.63) of GNU make to not export all variables.
 # Otherwise a system limit (for SysV at least) may be exceeded.
 .NOEXPORT:
diff --git a/Build/source/texk/lacheck/aclocal.m4 b/Build/source/texk/lacheck/aclocal.m4
index 50817ffe37f..85b2dd55426 100644
--- a/Build/source/texk/lacheck/aclocal.m4
+++ b/Build/source/texk/lacheck/aclocal.m4
@@ -905,7 +905,6 @@ AC_SUBST([am__untar])
 ]) # _AM_PROG_TAR
 
 m4_include([../../m4/kpse-common.m4])
-m4_include([../../m4/kpse-kpathsea-flags.m4])
 m4_include([../../m4/kpse-lex.m4])
 m4_include([../../m4/libtool.m4])
 m4_include([../../m4/ltoptions.m4])
diff --git a/Build/source/texk/lacheck/c-auto.in b/Build/source/texk/lacheck/c-auto.in
deleted file mode 100644
index 0d89bed8940..00000000000
--- a/Build/source/texk/lacheck/c-auto.in
+++ /dev/null
@@ -1,172 +0,0 @@
-/* c-auto.in.  Generated from configure.ac by autoheader.  */
-
-/* Define to 1 if the `closedir' function returns void instead of `int'. */
-#undef CLOSEDIR_VOID
-
-/* Define to 1 if you have the <assert.h> header file. */
-#undef HAVE_ASSERT_H
-
-/* Define to 1 if you have the `bcmp' function. */
-#undef HAVE_BCMP
-
-/* Define to 1 if you have the `bcopy' function. */
-#undef HAVE_BCOPY
-
-/* Define to 1 if you have the `bzero' function. */
-#undef HAVE_BZERO
-
-/* Define to 1 if you have the <dirent.h> header file, and it defines `DIR'.
-   */
-#undef HAVE_DIRENT_H
-
-/* Define to 1 if you have the <dlfcn.h> header file. */
-#undef HAVE_DLFCN_H
-
-/* Define to 1 if you have the <float.h> header file. */
-#undef HAVE_FLOAT_H
-
-/* Define to 1 if fseeko (and presumably ftello) exists and is declared. */
-#undef HAVE_FSEEKO
-
-/* Define to 1 if you have the `getcwd' function. */
-#undef HAVE_GETCWD
-
-/* Define to 1 if you have the `getwd' function. */
-#undef HAVE_GETWD
-
-/* Define to 1 if you have the `index' function. */
-#undef HAVE_INDEX
-
-/* Define to 1 if you have the <inttypes.h> header file. */
-#undef HAVE_INTTYPES_H
-
-/* Define to 1 if you have the <limits.h> header file. */
-#undef HAVE_LIMITS_H
-
-/* Define to 1 if you have the `memcmp' function. */
-#undef HAVE_MEMCMP
-
-/* Define to 1 if you have the `memcpy' function. */
-#undef HAVE_MEMCPY
-
-/* Define to 1 if you have the <memory.h> header file. */
-#undef HAVE_MEMORY_H
-
-/* Define to 1 if you have the <ndir.h> header file, and it defines `DIR'. */
-#undef HAVE_NDIR_H
-
-/* Define to 1 if you are using GNU libc or otherwise have global variables
-   `program_invocation_name' and `program_invocation_short_name'. */
-#undef HAVE_PROGRAM_INVOCATION_NAME
-
-/* Define to 1 if your compiler understands prototypes. */
-#undef HAVE_PROTOTYPES
-
-/* Define to 1 if you have the `putenv' function. */
-#undef HAVE_PUTENV
-
-/* Define to 1 if you have the <pwd.h> header file. */
-#undef HAVE_PWD_H
-
-/* Define to 1 if you have the `rindex' function. */
-#undef HAVE_RINDEX
-
-/* Define to 1 if you have the <stdint.h> header file. */
-#undef HAVE_STDINT_H
-
-/* Define to 1 if you have the <stdlib.h> header file. */
-#undef HAVE_STDLIB_H
-
-/* Define to 1 if you have the `strcasecmp' function. */
-#undef HAVE_STRCASECMP
-
-/* Define to 1 if you have the `strchr' function. */
-#undef HAVE_STRCHR
-
-/* Define to 1 if you have the <strings.h> header file. */
-#undef HAVE_STRINGS_H
-
-/* Define to 1 if you have the <string.h> header file. */
-#undef HAVE_STRING_H
-
-/* Define to 1 if you have the `strrchr' function. */
-#undef HAVE_STRRCHR
-
-/* Define to 1 if you have the `strstr' function. */
-#undef HAVE_STRSTR
-
-/* Define to 1 if you have the `strtol' function. */
-#undef HAVE_STRTOL
-
-/* Define to 1 if `st_mtim' is member of `struct stat'. */
-#undef HAVE_STRUCT_STAT_ST_MTIM
-
-/* Define to 1 if you have the <sys/dir.h> header file, and it defines `DIR'.
-   */
-#undef HAVE_SYS_DIR_H
-
-/* Define to 1 if you have the <sys/ndir.h> header file, and it defines `DIR'.
-   */
-#undef HAVE_SYS_NDIR_H
-
-/* Define to 1 if you have the <sys/param.h> header file. */
-#undef HAVE_SYS_PARAM_H
-
-/* Define to 1 if you have the <sys/stat.h> header file. */
-#undef HAVE_SYS_STAT_H
-
-/* Define to 1 if you have the <sys/types.h> header file. */
-#undef HAVE_SYS_TYPES_H
-
-/* Define to 1 if you have the <unistd.h> header file. */
-#undef HAVE_UNISTD_H
-
-/* Define to the sub-directory in which libtool stores uninstalled libraries.
-   */
-#undef LT_OBJDIR
-
-/* Name of package */
-#undef PACKAGE
-
-/* Define to the address where bug reports for this package should be sent. */
-#undef PACKAGE_BUGREPORT
-
-/* Define to the full name of this package. */
-#undef PACKAGE_NAME
-
-/* Define to the full name and version of this package. */
-#undef PACKAGE_STRING
-
-/* Define to the one symbol short name of this package. */
-#undef PACKAGE_TARNAME
-
-/* Define to the version of this package. */
-#undef PACKAGE_VERSION
-
-/* Define to 1 if you have the ANSI C header files. */
-#undef STDC_HEADERS
-
-/* Version number of package */
-#undef VERSION
-
-/* Define to 1 if `lex' declares `yytext' as a `char *' by default, not a
-   `char[]'. */
-#undef YYTEXT_POINTER
-
-/* Number of bits in a file offset, on hosts where this is settable. */
-#undef _FILE_OFFSET_BITS
-
-/* Define to 1 to make fseeko visible on some hosts (e.g. glibc 2.2). */
-#undef _LARGEFILE_SOURCE
-
-/* Define for large files, on AIX-style hosts. */
-#undef _LARGE_FILES
-
-/* Define to empty if `const' does not conform to ANSI C. */
-#undef const
-
-/* Define to `__inline__' or `__inline' if that's what the C compiler
-   calls it, or to nothing if 'inline' is not supported under any name.  */
-#ifndef __cplusplus
-#undef inline
-#endif
diff --git a/Build/source/texk/lacheck/configure b/Build/source/texk/lacheck/configure
index 4d57f77aec4..075722c8618 100755
--- a/Build/source/texk/lacheck/configure
+++ b/Build/source/texk/lacheck/configure
@@ -788,10 +788,6 @@ ac_includes_default="\
 
 ac_subst_vars='LTLIBOBJS
 LIBOBJS
-KPATHSEA_RULE
-KPATHSEA_DEPEND
-KPATHSEA_LIBS
-KPATHSEA_INCLUDES
 LEXLIB
 LEX_OUTPUT_ROOT
 LEX
@@ -915,9 +911,6 @@ enable_dependency_tracking
 with_gnu_ld
 enable_libtool_lock
 enable_largefile
-with_system_kpathsea
-with_kpathsea_includes
-with_kpathsea_libdir
 '
       ac_precious_vars='build_alias
 host_alias
@@ -1576,11 +1569,6 @@ Optional Packages:
   --with-pic              try to use only PIC/non-PIC objects [default=use
                           both]
   --with-gnu-ld           assume the C compiler uses GNU ld [default=no]
-  --with-system-kpathsea  use installed kpathsea headers and library
-  --with-kpathsea-includes=DIR
-                          kpathsea headers installed in DIR
-  --with-kpathsea-libdir=DIR
-                          kpathsea library installed in DIR
 
 Some influential environment variables:
   CC          C compiler command
@@ -4176,13 +4164,13 @@ if test "${lt_cv_nm_interface+set}" = set; then
 else
   lt_cv_nm_interface="BSD nm"
   echo "int some_variable = 0;" > conftest.$ac_ext
-  (eval echo "\"\$as_me:4179: $ac_compile\"" >&5)
+  (eval echo "\"\$as_me:4167: $ac_compile\"" >&5)
   (eval "$ac_compile" 2>conftest.err)
   cat conftest.err >&5
-  (eval echo "\"\$as_me:4182: $NM \\\"conftest.$ac_objext\\\"\"" >&5)
+  (eval echo "\"\$as_me:4170: $NM \\\"conftest.$ac_objext\\\"\"" >&5)
   (eval "$NM \"conftest.$ac_objext\"" 2>conftest.err > conftest.out)
   cat conftest.err >&5
-  (eval echo "\"\$as_me:4185: output\"" >&5)
+  (eval echo "\"\$as_me:4173: output\"" >&5)
   cat conftest.out >&5
   if $GREP 'External.*some_variable' conftest.out > /dev/null; then
     lt_cv_nm_interface="MS dumpbin"
@@ -5388,7 +5376,7 @@ ia64-*-hpux*)
   ;;
 *-*-irix6*)
   # Find out which ABI we are using.
-  echo '#line 5391 "configure"' > conftest.$ac_ext
+  echo '#line 5379 "configure"' > conftest.$ac_ext
   if { (eval echo "$as_me:$LINENO: \"$ac_compile\"") >&5
   (eval $ac_compile) 2>&5
   ac_status=$?
@@ -7435,11 +7423,11 @@ else
    -e 's:.*FLAGS}\{0,1\} :&$lt_compiler_flag :; t' \
    -e 's: [^ ]*conftest\.: $lt_compiler_flag&:; t' \
    -e 's:$: $lt_compiler_flag:'`
-   (eval echo "\"\$as_me:7438: $lt_compile\"" >&5)
+   (eval echo "\"\$as_me:7426: $lt_compile\"" >&5)
    (eval "$lt_compile" 2>conftest.err)
    ac_status=$?
    cat conftest.err >&5
-   echo "$as_me:7442: \$? = $ac_status" >&5
+   echo "$as_me:7430: \$? = $ac_status" >&5
    if (exit $ac_status) && test -s "$ac_outfile"; then
      # The compiler can only warn and ignore the option if not recognized
      # So say no if there are warnings other than the usual output.
@@ -7774,11 +7762,11 @@ else
    -e 's:.*FLAGS}\{0,1\} :&$lt_compiler_flag :; t' \
    -e 's: [^ ]*conftest\.: $lt_compiler_flag&:; t' \
    -e 's:$: $lt_compiler_flag:'`
-   (eval echo "\"\$as_me:7777: $lt_compile\"" >&5)
+   (eval echo "\"\$as_me:7765: $lt_compile\"" >&5)
    (eval "$lt_compile" 2>conftest.err)
    ac_status=$?
    cat conftest.err >&5
-   echo "$as_me:7781: \$? = $ac_status" >&5
+   echo "$as_me:7769: \$? = $ac_status" >&5
    if (exit $ac_status) && test -s "$ac_outfile"; then
      # The compiler can only warn and ignore the option if not recognized
      # So say no if there are warnings other than the usual output.
@@ -7879,11 +7867,11 @@ else
    -e 's:.*FLAGS}\{0,1\} :&$lt_compiler_flag :; t' \
    -e 's: [^ ]*conftest\.: $lt_compiler_flag&:; t' \
    -e 's:$: $lt_compiler_flag:'`
-   (eval echo "\"\$as_me:7882: $lt_compile\"" >&5)
+   (eval echo "\"\$as_me:7870: $lt_compile\"" >&5)
    (eval "$lt_compile" 2>out/conftest.err)
    ac_status=$?
    cat out/conftest.err >&5
-   echo "$as_me:7886: \$? = $ac_status" >&5
+   echo "$as_me:7874: \$? = $ac_status" >&5
    if (exit $ac_status) && test -s out/conftest2.$ac_objext
    then
      # The compiler can only warn and ignore the option if not recognized
@@ -7934,11 +7922,11 @@ else
    -e 's:.*FLAGS}\{0,1\} :&$lt_compiler_flag :; t' \
    -e 's: [^ ]*conftest\.: $lt_compiler_flag&:; t' \
    -e 's:$: $lt_compiler_flag:'`
-   (eval echo "\"\$as_me:7937: $lt_compile\"" >&5)
+   (eval echo "\"\$as_me:7925: $lt_compile\"" >&5)
    (eval "$lt_compile" 2>out/conftest.err)
    ac_status=$?
    cat out/conftest.err >&5
-   echo "$as_me:7941: \$? = $ac_status" >&5
+   echo "$as_me:7929: \$? = $ac_status" >&5
    if (exit $ac_status) && test -s out/conftest2.$ac_objext
    then
      # The compiler can only warn and ignore the option if not recognized
@@ -10734,7 +10722,7 @@ else
   lt_dlunknown=0; lt_dlno_uscore=1; lt_dlneed_uscore=2
   lt_status=$lt_dlunknown
   cat > conftest.$ac_ext <<_LT_EOF
-#line 10737 "configure"
+#line 10725 "configure"
 #include "confdefs.h"
 
 #if HAVE_DLFCN_H
@@ -10830,7 +10818,7 @@ else
   lt_dlunknown=0; lt_dlno_uscore=1; lt_dlneed_uscore=2
   lt_status=$lt_dlunknown
   cat > conftest.$ac_ext <<_LT_EOF
-#line 10833 "configure"
+#line 10821 "configure"
 #include "confdefs.h"
 
 #if HAVE_DLFCN_H
@@ -13057,1346 +13045,7 @@ case $LEX in
 esac
 
 
-ac_config_headers="$ac_config_headers c-auto.h:c-auto.in"
-
-
-## _KPSE_INIT: Initialize TL infrastructure
-kpse_BLD=`(cd "./../../." && pwd)`
-kpse_SRC=`(cd "$srcdir/../../." && pwd)`
-
-## _KPSE_USE_LIBTOOL: Generate a libtool script for use in configure tests
-: ${CONFIG_LT=./config.lt}
-{ $as_echo "$as_me:$LINENO: creating $CONFIG_LT" >&5
-$as_echo "$as_me: creating $CONFIG_LT" >&6;}
-cat >"$CONFIG_LT" <<_LTEOF
-#! $SHELL
-# Generated by $as_me.
-# Run this file to recreate a libtool stub with the current configuration.
-
-lt_cl_silent=false
-SHELL=\${CONFIG_SHELL-$SHELL}
-_LTEOF
-
-cat >>"$CONFIG_LT" <<\_LTEOF
-## --------------------- ##
-## M4sh Initialization.  ##
-## --------------------- ##
-
-# Be more Bourne compatible
-DUALCASE=1; export DUALCASE # for MKS sh
-if test -n "${ZSH_VERSION+set}" && (emulate sh) >/dev/null 2>&1; then
-  emulate sh
-  NULLCMD=:
-  # Pre-4.2 versions of Zsh do word splitting on ${1+"$@"}, which
-  # is contrary to our usage.  Disable this feature.
-  alias -g '${1+"$@"}'='"$@"'
-  setopt NO_GLOB_SUBST
-else
-  case `(set -o) 2>/dev/null` in
-  *posix*) set -o posix ;;
-esac
-
-fi
-
-
-
-
-# PATH needs CR
-# Avoid depending upon Character Ranges.
-as_cr_letters='abcdefghijklmnopqrstuvwxyz'
-as_cr_LETTERS='ABCDEFGHIJKLMNOPQRSTUVWXYZ'
-as_cr_Letters=$as_cr_letters$as_cr_LETTERS
-as_cr_digits='0123456789'
-as_cr_alnum=$as_cr_Letters$as_cr_digits
-
-as_nl='
-'
-export as_nl
-# Printing a long string crashes Solaris 7 /usr/bin/printf.
-as_echo='\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\'
-as_echo=$as_echo$as_echo$as_echo$as_echo$as_echo
-as_echo=$as_echo$as_echo$as_echo$as_echo$as_echo$as_echo
-if (test "X`printf %s $as_echo`" = "X$as_echo") 2>/dev/null; then
-  as_echo='printf %s\n'
-  as_echo_n='printf %s'
-else
-  if test "X`(/usr/ucb/echo -n -n $as_echo) 2>/dev/null`" = "X-n $as_echo"; then
-    as_echo_body='eval /usr/ucb/echo -n "$1$as_nl"'
-    as_echo_n='/usr/ucb/echo -n'
-  else
-    as_echo_body='eval expr "X$1" : "X\\(.*\\)"'
-    as_echo_n_body='eval
-      arg=$1;
-      case $arg in
-      *"$as_nl"*)
-	expr "X$arg" : "X\\(.*\\)$as_nl";
-	arg=`expr "X$arg" : ".*$as_nl\\(.*\\)"`;;
-      esac;
-      expr "X$arg" : "X\\(.*\\)" | tr -d "$as_nl"
-    '
-    export as_echo_n_body
-    as_echo_n='sh -c $as_echo_n_body as_echo'
-  fi
-  export as_echo_body
-  as_echo='sh -c $as_echo_body as_echo'
-fi
-
-# The user is always right.
-if test "${PATH_SEPARATOR+set}" != set; then
-  PATH_SEPARATOR=:
-  (PATH='/bin;/bin'; FPATH=$PATH; sh -c :) >/dev/null 2>&1 && {
-    (PATH='/bin:/bin'; FPATH=$PATH; sh -c :) >/dev/null 2>&1 ||
-      PATH_SEPARATOR=';'
-  }
-fi
-
-# Support unset when possible.
-if ( (MAIL=60; unset MAIL) || exit) >/dev/null 2>&1; then
-  as_unset=unset
-else
-  as_unset=false
-fi
-
-
-# IFS
-# We need space, tab and new line, in precisely that order.  Quoting is
-# there to prevent editors from complaining about space-tab.
-# (If _AS_PATH_WALK were called with IFS unset, it would disable word
-# splitting by setting IFS to empty value.)
-IFS=" ""	$as_nl"
-
-# Find who we are.  Look in the path if we contain no directory separator.
-case $0 in
-  *[\\/]* ) as_myself=$0 ;;
-  *) as_save_IFS=$IFS; IFS=$PATH_SEPARATOR
-for as_dir in $PATH
-do
-  IFS=$as_save_IFS
-  test -z "$as_dir" && as_dir=.
-  test -r "$as_dir/$0" && as_myself=$as_dir/$0 && break
-done
-IFS=$as_save_IFS
-
-     ;;
-esac
-# We did not find ourselves, most probably we were run as `sh COMMAND'
-# in which case we are not to be found in the path.
-if test "x$as_myself" = x; then
-  as_myself=$0
-fi
-if test ! -f "$as_myself"; then
-  $as_echo "$as_myself: error: cannot find myself; rerun with an absolute file name" >&2
-  { (exit 1); exit 1; }
-fi
-
-# Work around bugs in pre-3.0 UWIN ksh.
-for as_var in ENV MAIL MAILPATH
-do ($as_unset $as_var) >/dev/null 2>&1 && $as_unset $as_var
-done
-PS1='$ '
-PS2='> '
-PS4='+ '
-
-# NLS nuisances.
-LC_ALL=C
-export LC_ALL
-LANGUAGE=C
-export LANGUAGE
-
-# Required to use basename.
-if expr a : '\(a\)' >/dev/null 2>&1 &&
-   test "X`expr 00001 : '.*\(...\)'`" = X001; then
-  as_expr=expr
-else
-  as_expr=false
-fi
-
-if (basename -- /) >/dev/null 2>&1 && test "X`basename -- / 2>&1`" = "X/"; then
-  as_basename=basename
-else
-  as_basename=false
-fi
-
-
-# Name of the executable.
-as_me=`$as_basename -- "$0" ||
-$as_expr X/"$0" : '.*/\([^/][^/]*\)/*$' \| \
-	 X"$0" : 'X\(//\)$' \| \
-	 X"$0" : 'X\(/\)' \| . 2>/dev/null ||
-$as_echo X/"$0" |
-    sed '/^.*\/\([^/][^/]*\)\/*$/{
-	    s//\1/
-	    q
-	  }
-	  /^X\/\(\/\/\)$/{
-	    s//\1/
-	    q
-	  }
-	  /^X\/\(\/\).*/{
-	    s//\1/
-	    q
-	  }
-	  s/.*/./; q'`
-
-# CDPATH.
-$as_unset CDPATH
-
-
-
-  as_lineno_1=$LINENO
-  as_lineno_2=$LINENO
-  test "x$as_lineno_1" != "x$as_lineno_2" &&
-  test "x`expr $as_lineno_1 + 1`" = "x$as_lineno_2" || {
-
-  # Create $as_me.lineno as a copy of $as_myself, but with $LINENO
-  # uniformly replaced by the line number.  The first 'sed' inserts a
-  # line-number line after each line using $LINENO; the second 'sed'
-  # does the real work.  The second script uses 'N' to pair each
-  # line-number line with the line containing $LINENO, and appends
-  # trailing '-' during substitution so that $LINENO is not a special
-  # case at line end.
-  # (Raja R Harinath suggested sed '=', and Paul Eggert wrote the
-  # scripts with optimization help from Paolo Bonzini.  Blame Lee
-  # E. McMahon (1931-1989) for sed's syntax.  :-)
-  sed -n '
-    p
-    /[$]LINENO/=
-  ' <$as_myself |
-    sed '
-      s/[$]LINENO.*/&-/
-      t lineno
-      b
-      :lineno
-      N
-      :loop
-      s/[$]LINENO\([^'$as_cr_alnum'_].*\n\)\(.*\)/\2\1\2/
-      t loop
-      s/-\n.*//
-    ' >$as_me.lineno &&
-  chmod +x "$as_me.lineno" ||
-    { { $as_echo "$as_me:$LINENO: error: cannot create $as_me.lineno; rerun with a POSIX shell" >&5
-$as_echo "$as_me: error: cannot create $as_me.lineno; rerun with a POSIX shell" >&2;}
-   { (exit 1); exit 1; }; }
-
-  # Don't try to exec as it changes $[0], causing all sort of problems
-  # (the dirname of $[0] is not the place where we might find the
-  # original and so on.  Autoconf is especially sensitive to this).
-  . "./$as_me.lineno"
-  # Exit status is that of the last command.
-  exit
-}
-
-
-if (as_dir=`dirname -- /` && test "X$as_dir" = X/) >/dev/null 2>&1; then
-  as_dirname=dirname
-else
-  as_dirname=false
-fi
-
-ECHO_C= ECHO_N= ECHO_T=
-case `echo -n x` in
--n*)
-  case `echo 'x\c'` in
-  *c*) ECHO_T='	';;	# ECHO_T is single tab character.
-  *)   ECHO_C='\c';;
-  esac;;
-*)
-  ECHO_N='-n';;
-esac
-if expr a : '\(a\)' >/dev/null 2>&1 &&
-   test "X`expr 00001 : '.*\(...\)'`" = X001; then
-  as_expr=expr
-else
-  as_expr=false
-fi
-
-rm -f conf$$ conf$$.exe conf$$.file
-if test -d conf$$.dir; then
-  rm -f conf$$.dir/conf$$.file
-else
-  rm -f conf$$.dir
-  mkdir conf$$.dir 2>/dev/null
-fi
-if (echo >conf$$.file) 2>/dev/null; then
-  if ln -s conf$$.file conf$$ 2>/dev/null; then
-    as_ln_s='ln -s'
-    # ... but there are two gotchas:
-    # 1) On MSYS, both `ln -s file dir' and `ln file dir' fail.
-    # 2) DJGPP < 2.04 has no symlinks; `ln -s' creates a wrapper executable.
-    # In both cases, we have to default to `cp -p'.
-    ln -s conf$$.file conf$$.dir 2>/dev/null && test ! -f conf$$.exe ||
-      as_ln_s='cp -p'
-  elif ln conf$$.file conf$$ 2>/dev/null; then
-    as_ln_s=ln
-  else
-    as_ln_s='cp -p'
-  fi
-else
-  as_ln_s='cp -p'
-fi
-rm -f conf$$ conf$$.exe conf$$.dir/conf$$.file conf$$.file
-rmdir conf$$.dir 2>/dev/null
-
-if mkdir -p . 2>/dev/null; then
-  as_mkdir_p=:
-else
-  test -d ./-p && rmdir ./-p
-  as_mkdir_p=false
-fi
-
-if test -x / >/dev/null 2>&1; then
-  as_test_x='test -x'
-else
-  if ls -dL / >/dev/null 2>&1; then
-    as_ls_L_option=L
-  else
-    as_ls_L_option=
-  fi
-  as_test_x='
-    eval sh -c '\''
-      if test -d "$1"; then
-	test -d "$1/.";
-      else
-	case $1 in
-	-*)set "./$1";;
-	esac;
-	case `ls -ld'$as_ls_L_option' "$1" 2>/dev/null` in
-	???[sx]*):;;*)false;;esac;fi
-    '\'' sh
-  '
-fi
-as_executable_p=$as_test_x
-
-# Sed expression to map a string onto a valid CPP name.
-as_tr_cpp="eval sed 'y%*$as_cr_letters%P$as_cr_LETTERS%;s%[^_$as_cr_alnum]%_%g'"
-
-# Sed expression to map a string onto a valid variable name.
-as_tr_sh="eval sed 'y%*+%pp%;s%[^_$as_cr_alnum]%_%g'"
-
-
-
-exec 6>&1
-exec 5>>config.log
-{
-  echo
-  sed 'h;s/./-/g;s/^.../## /;s/...$/ ##/;p;x;p;x' <<_ASBOX
-## Running $as_me. ##
-_ASBOX
-} >&5
-
-lt_cl_help="\
-\`$as_me' creates a local libtool stub from the current configuration,
-for use in further configure time tests before the real libtool is
-generated.
-
-Usage: $0 [OPTIONS]
-
-  -h, --help      print this help, then exit
-  -V, --version   print version number, then exit
-  -q, --quiet     do not print progress messages
-  -d, --debug     don't remove temporary files
-
-Report bugs to <bug-libtool@gnu.org>."
-
-lt_cl_version="\
-LaCheck for TeX Live config.lt 1.26
-configured by $0, generated by GNU Autoconf 2.63.
-
-Copyright (C) 2008 Free Software Foundation, Inc.
-This config.lt script is free software; the Free Software Foundation
-gives unlimited permision to copy, distribute and modify it."
-
-while test $# != 0
-do
-  case $1 in
-    --version | --v* | -V )
-      echo "$lt_cl_version"; exit 0 ;;
-    --help | --h* | -h )
-      echo "$lt_cl_help"; exit 0 ;;
-    --debug | --d* | -d )
-      debug=: ;;
-    --quiet | --q* | --silent | --s* | -q )
-      lt_cl_silent=: ;;
-
-    -*) { { $as_echo "$as_me:$LINENO: error: unrecognized option: $1
-Try \`$0 --help' for more information." >&5
-$as_echo "$as_me: error: unrecognized option: $1
-Try \`$0 --help' for more information." >&2;}
-   { (exit 1); exit 1; }; } ;;
-
-    *) { { $as_echo "$as_me:$LINENO: error: unrecognized argument: $1
-Try \`$0 --help' for more information." >&5
-$as_echo "$as_me: error: unrecognized argument: $1
-Try \`$0 --help' for more information." >&2;}
-   { (exit 1); exit 1; }; } ;;
-  esac
-  shift
-done
-
-if $lt_cl_silent; then
-  exec 6>/dev/null
-fi
-_LTEOF
-
-cat >>"$CONFIG_LT" <<_LTEOF
-
-
-# The HP-UX ksh and POSIX shell print the target directory to stdout
-# if CDPATH is set.
-(unset CDPATH) >/dev/null 2>&1 && unset CDPATH
-
-sed_quote_subst='$sed_quote_subst'
-double_quote_subst='$double_quote_subst'
-delay_variable_subst='$delay_variable_subst'
-macro_version='`$ECHO "X$macro_version" | $Xsed -e "$delay_single_quote_subst"`'
-macro_revision='`$ECHO "X$macro_revision" | $Xsed -e "$delay_single_quote_subst"`'
-enable_shared='`$ECHO "X$enable_shared" | $Xsed -e "$delay_single_quote_subst"`'
-enable_static='`$ECHO "X$enable_static" | $Xsed -e "$delay_single_quote_subst"`'
-pic_mode='`$ECHO "X$pic_mode" | $Xsed -e "$delay_single_quote_subst"`'
-enable_fast_install='`$ECHO "X$enable_fast_install" | $Xsed -e "$delay_single_quote_subst"`'
-host_alias='`$ECHO "X$host_alias" | $Xsed -e "$delay_single_quote_subst"`'
-host='`$ECHO "X$host" | $Xsed -e "$delay_single_quote_subst"`'
-host_os='`$ECHO "X$host_os" | $Xsed -e "$delay_single_quote_subst"`'
-build_alias='`$ECHO "X$build_alias" | $Xsed -e "$delay_single_quote_subst"`'
-build='`$ECHO "X$build" | $Xsed -e "$delay_single_quote_subst"`'
-build_os='`$ECHO "X$build_os" | $Xsed -e "$delay_single_quote_subst"`'
-SED='`$ECHO "X$SED" | $Xsed -e "$delay_single_quote_subst"`'
-Xsed='`$ECHO "X$Xsed" | $Xsed -e "$delay_single_quote_subst"`'
-GREP='`$ECHO "X$GREP" | $Xsed -e "$delay_single_quote_subst"`'
-EGREP='`$ECHO "X$EGREP" | $Xsed -e "$delay_single_quote_subst"`'
-FGREP='`$ECHO "X$FGREP" | $Xsed -e "$delay_single_quote_subst"`'
-LD='`$ECHO "X$LD" | $Xsed -e "$delay_single_quote_subst"`'
-NM='`$ECHO "X$NM" | $Xsed -e "$delay_single_quote_subst"`'
-LN_S='`$ECHO "X$LN_S" | $Xsed -e "$delay_single_quote_subst"`'
-max_cmd_len='`$ECHO "X$max_cmd_len" | $Xsed -e "$delay_single_quote_subst"`'
-ac_objext='`$ECHO "X$ac_objext" | $Xsed -e "$delay_single_quote_subst"`'
-exeext='`$ECHO "X$exeext" | $Xsed -e "$delay_single_quote_subst"`'
-lt_unset='`$ECHO "X$lt_unset" | $Xsed -e "$delay_single_quote_subst"`'
-lt_SP2NL='`$ECHO "X$lt_SP2NL" | $Xsed -e "$delay_single_quote_subst"`'
-lt_NL2SP='`$ECHO "X$lt_NL2SP" | $Xsed -e "$delay_single_quote_subst"`'
-reload_flag='`$ECHO "X$reload_flag" | $Xsed -e "$delay_single_quote_subst"`'
-reload_cmds='`$ECHO "X$reload_cmds" | $Xsed -e "$delay_single_quote_subst"`'
-OBJDUMP='`$ECHO "X$OBJDUMP" | $Xsed -e "$delay_single_quote_subst"`'
-deplibs_check_method='`$ECHO "X$deplibs_check_method" | $Xsed -e "$delay_single_quote_subst"`'
-file_magic_cmd='`$ECHO "X$file_magic_cmd" | $Xsed -e "$delay_single_quote_subst"`'
-AR='`$ECHO "X$AR" | $Xsed -e "$delay_single_quote_subst"`'
-AR_FLAGS='`$ECHO "X$AR_FLAGS" | $Xsed -e "$delay_single_quote_subst"`'
-STRIP='`$ECHO "X$STRIP" | $Xsed -e "$delay_single_quote_subst"`'
-RANLIB='`$ECHO "X$RANLIB" | $Xsed -e "$delay_single_quote_subst"`'
-old_postinstall_cmds='`$ECHO "X$old_postinstall_cmds" | $Xsed -e "$delay_single_quote_subst"`'
-old_postuninstall_cmds='`$ECHO "X$old_postuninstall_cmds" | $Xsed -e "$delay_single_quote_subst"`'
-old_archive_cmds='`$ECHO "X$old_archive_cmds" | $Xsed -e "$delay_single_quote_subst"`'
-CC='`$ECHO "X$CC" | $Xsed -e "$delay_single_quote_subst"`'
-CFLAGS='`$ECHO "X$CFLAGS" | $Xsed -e "$delay_single_quote_subst"`'
-compiler='`$ECHO "X$compiler" | $Xsed -e "$delay_single_quote_subst"`'
-GCC='`$ECHO "X$GCC" | $Xsed -e "$delay_single_quote_subst"`'
-lt_cv_sys_global_symbol_pipe='`$ECHO "X$lt_cv_sys_global_symbol_pipe" | $Xsed -e "$delay_single_quote_subst"`'
-lt_cv_sys_global_symbol_to_cdecl='`$ECHO "X$lt_cv_sys_global_symbol_to_cdecl" | $Xsed -e "$delay_single_quote_subst"`'
-lt_cv_sys_global_symbol_to_c_name_address='`$ECHO "X$lt_cv_sys_global_symbol_to_c_name_address" | $Xsed -e "$delay_single_quote_subst"`'
-lt_cv_sys_global_symbol_to_c_name_address_lib_prefix='`$ECHO "X$lt_cv_sys_global_symbol_to_c_name_address_lib_prefix" | $Xsed -e "$delay_single_quote_subst"`'
-objdir='`$ECHO "X$objdir" | $Xsed -e "$delay_single_quote_subst"`'
-SHELL='`$ECHO "X$SHELL" | $Xsed -e "$delay_single_quote_subst"`'
-ECHO='`$ECHO "X$ECHO" | $Xsed -e "$delay_single_quote_subst"`'
-MAGIC_CMD='`$ECHO "X$MAGIC_CMD" | $Xsed -e "$delay_single_quote_subst"`'
-lt_prog_compiler_no_builtin_flag='`$ECHO "X$lt_prog_compiler_no_builtin_flag" | $Xsed -e "$delay_single_quote_subst"`'
-lt_prog_compiler_wl='`$ECHO "X$lt_prog_compiler_wl" | $Xsed -e "$delay_single_quote_subst"`'
-lt_prog_compiler_pic='`$ECHO "X$lt_prog_compiler_pic" | $Xsed -e "$delay_single_quote_subst"`'
-lt_prog_compiler_static='`$ECHO "X$lt_prog_compiler_static" | $Xsed -e "$delay_single_quote_subst"`'
-lt_cv_prog_compiler_c_o='`$ECHO "X$lt_cv_prog_compiler_c_o" | $Xsed -e "$delay_single_quote_subst"`'
-need_locks='`$ECHO "X$need_locks" | $Xsed -e "$delay_single_quote_subst"`'
-DSYMUTIL='`$ECHO "X$DSYMUTIL" | $Xsed -e "$delay_single_quote_subst"`'
-NMEDIT='`$ECHO "X$NMEDIT" | $Xsed -e "$delay_single_quote_subst"`'
-LIPO='`$ECHO "X$LIPO" | $Xsed -e "$delay_single_quote_subst"`'
-OTOOL='`$ECHO "X$OTOOL" | $Xsed -e "$delay_single_quote_subst"`'
-OTOOL64='`$ECHO "X$OTOOL64" | $Xsed -e "$delay_single_quote_subst"`'
-libext='`$ECHO "X$libext" | $Xsed -e "$delay_single_quote_subst"`'
-shrext_cmds='`$ECHO "X$shrext_cmds" | $Xsed -e "$delay_single_quote_subst"`'
-extract_expsyms_cmds='`$ECHO "X$extract_expsyms_cmds" | $Xsed -e "$delay_single_quote_subst"`'
-archive_cmds_need_lc='`$ECHO "X$archive_cmds_need_lc" | $Xsed -e "$delay_single_quote_subst"`'
-enable_shared_with_static_runtimes='`$ECHO "X$enable_shared_with_static_runtimes" | $Xsed -e "$delay_single_quote_subst"`'
-export_dynamic_flag_spec='`$ECHO "X$export_dynamic_flag_spec" | $Xsed -e "$delay_single_quote_subst"`'
-whole_archive_flag_spec='`$ECHO "X$whole_archive_flag_spec" | $Xsed -e "$delay_single_quote_subst"`'
-compiler_needs_object='`$ECHO "X$compiler_needs_object" | $Xsed -e "$delay_single_quote_subst"`'
-old_archive_from_new_cmds='`$ECHO "X$old_archive_from_new_cmds" | $Xsed -e "$delay_single_quote_subst"`'
-old_archive_from_expsyms_cmds='`$ECHO "X$old_archive_from_expsyms_cmds" | $Xsed -e "$delay_single_quote_subst"`'
-archive_cmds='`$ECHO "X$archive_cmds" | $Xsed -e "$delay_single_quote_subst"`'
-archive_expsym_cmds='`$ECHO "X$archive_expsym_cmds" | $Xsed -e "$delay_single_quote_subst"`'
-module_cmds='`$ECHO "X$module_cmds" | $Xsed -e "$delay_single_quote_subst"`'
-module_expsym_cmds='`$ECHO "X$module_expsym_cmds" | $Xsed -e "$delay_single_quote_subst"`'
-with_gnu_ld='`$ECHO "X$with_gnu_ld" | $Xsed -e "$delay_single_quote_subst"`'
-allow_undefined_flag='`$ECHO "X$allow_undefined_flag" | $Xsed -e "$delay_single_quote_subst"`'
-no_undefined_flag='`$ECHO "X$no_undefined_flag" | $Xsed -e "$delay_single_quote_subst"`'
-hardcode_libdir_flag_spec='`$ECHO "X$hardcode_libdir_flag_spec" | $Xsed -e "$delay_single_quote_subst"`'
-hardcode_libdir_flag_spec_ld='`$ECHO "X$hardcode_libdir_flag_spec_ld" | $Xsed -e "$delay_single_quote_subst"`'
-hardcode_libdir_separator='`$ECHO "X$hardcode_libdir_separator" | $Xsed -e "$delay_single_quote_subst"`'
-hardcode_direct='`$ECHO "X$hardcode_direct" | $Xsed -e "$delay_single_quote_subst"`'
-hardcode_direct_absolute='`$ECHO "X$hardcode_direct_absolute" | $Xsed -e "$delay_single_quote_subst"`'
-hardcode_minus_L='`$ECHO "X$hardcode_minus_L" | $Xsed -e "$delay_single_quote_subst"`'
-hardcode_shlibpath_var='`$ECHO "X$hardcode_shlibpath_var" | $Xsed -e "$delay_single_quote_subst"`'
-hardcode_automatic='`$ECHO "X$hardcode_automatic" | $Xsed -e "$delay_single_quote_subst"`'
-inherit_rpath='`$ECHO "X$inherit_rpath" | $Xsed -e "$delay_single_quote_subst"`'
-link_all_deplibs='`$ECHO "X$link_all_deplibs" | $Xsed -e "$delay_single_quote_subst"`'
-fix_srcfile_path='`$ECHO "X$fix_srcfile_path" | $Xsed -e "$delay_single_quote_subst"`'
-always_export_symbols='`$ECHO "X$always_export_symbols" | $Xsed -e "$delay_single_quote_subst"`'
-export_symbols_cmds='`$ECHO "X$export_symbols_cmds" | $Xsed -e "$delay_single_quote_subst"`'
-exclude_expsyms='`$ECHO "X$exclude_expsyms" | $Xsed -e "$delay_single_quote_subst"`'
-include_expsyms='`$ECHO "X$include_expsyms" | $Xsed -e "$delay_single_quote_subst"`'
-prelink_cmds='`$ECHO "X$prelink_cmds" | $Xsed -e "$delay_single_quote_subst"`'
-file_list_spec='`$ECHO "X$file_list_spec" | $Xsed -e "$delay_single_quote_subst"`'
-variables_saved_for_relink='`$ECHO "X$variables_saved_for_relink" | $Xsed -e "$delay_single_quote_subst"`'
-need_lib_prefix='`$ECHO "X$need_lib_prefix" | $Xsed -e "$delay_single_quote_subst"`'
-need_version='`$ECHO "X$need_version" | $Xsed -e "$delay_single_quote_subst"`'
-version_type='`$ECHO "X$version_type" | $Xsed -e "$delay_single_quote_subst"`'
-runpath_var='`$ECHO "X$runpath_var" | $Xsed -e "$delay_single_quote_subst"`'
-shlibpath_var='`$ECHO "X$shlibpath_var" | $Xsed -e "$delay_single_quote_subst"`'
-shlibpath_overrides_runpath='`$ECHO "X$shlibpath_overrides_runpath" | $Xsed -e "$delay_single_quote_subst"`'
-libname_spec='`$ECHO "X$libname_spec" | $Xsed -e "$delay_single_quote_subst"`'
-library_names_spec='`$ECHO "X$library_names_spec" | $Xsed -e "$delay_single_quote_subst"`'
-soname_spec='`$ECHO "X$soname_spec" | $Xsed -e "$delay_single_quote_subst"`'
-postinstall_cmds='`$ECHO "X$postinstall_cmds" | $Xsed -e "$delay_single_quote_subst"`'
-postuninstall_cmds='`$ECHO "X$postuninstall_cmds" | $Xsed -e "$delay_single_quote_subst"`'
-finish_cmds='`$ECHO "X$finish_cmds" | $Xsed -e "$delay_single_quote_subst"`'
-finish_eval='`$ECHO "X$finish_eval" | $Xsed -e "$delay_single_quote_subst"`'
-hardcode_into_libs='`$ECHO "X$hardcode_into_libs" | $Xsed -e "$delay_single_quote_subst"`'
-sys_lib_search_path_spec='`$ECHO "X$sys_lib_search_path_spec" | $Xsed -e "$delay_single_quote_subst"`'
-sys_lib_dlsearch_path_spec='`$ECHO "X$sys_lib_dlsearch_path_spec" | $Xsed -e "$delay_single_quote_subst"`'
-hardcode_action='`$ECHO "X$hardcode_action" | $Xsed -e "$delay_single_quote_subst"`'
-enable_dlopen='`$ECHO "X$enable_dlopen" | $Xsed -e "$delay_single_quote_subst"`'
-enable_dlopen_self='`$ECHO "X$enable_dlopen_self" | $Xsed -e "$delay_single_quote_subst"`'
-enable_dlopen_self_static='`$ECHO "X$enable_dlopen_self_static" | $Xsed -e "$delay_single_quote_subst"`'
-old_striplib='`$ECHO "X$old_striplib" | $Xsed -e "$delay_single_quote_subst"`'
-striplib='`$ECHO "X$striplib" | $Xsed -e "$delay_single_quote_subst"`'
-
-LTCC='$LTCC'
-LTCFLAGS='$LTCFLAGS'
-compiler='$compiler_DEFAULT'
-
-# Quote evaled strings.
-for var in SED \
-GREP \
-EGREP \
-FGREP \
-LD \
-NM \
-LN_S \
-lt_SP2NL \
-lt_NL2SP \
-reload_flag \
-OBJDUMP \
-deplibs_check_method \
-file_magic_cmd \
-AR \
-AR_FLAGS \
-STRIP \
-RANLIB \
-CC \
-CFLAGS \
-compiler \
-lt_cv_sys_global_symbol_pipe \
-lt_cv_sys_global_symbol_to_cdecl \
-lt_cv_sys_global_symbol_to_c_name_address \
-lt_cv_sys_global_symbol_to_c_name_address_lib_prefix \
-SHELL \
-ECHO \
-lt_prog_compiler_no_builtin_flag \
-lt_prog_compiler_wl \
-lt_prog_compiler_pic \
-lt_prog_compiler_static \
-lt_cv_prog_compiler_c_o \
-need_locks \
-DSYMUTIL \
-NMEDIT \
-LIPO \
-OTOOL \
-OTOOL64 \
-shrext_cmds \
-export_dynamic_flag_spec \
-whole_archive_flag_spec \
-compiler_needs_object \
-with_gnu_ld \
-allow_undefined_flag \
-no_undefined_flag \
-hardcode_libdir_flag_spec \
-hardcode_libdir_flag_spec_ld \
-hardcode_libdir_separator \
-fix_srcfile_path \
-exclude_expsyms \
-include_expsyms \
-file_list_spec \
-variables_saved_for_relink \
-libname_spec \
-library_names_spec \
-soname_spec \
-finish_eval \
-old_striplib \
-striplib; do
-    case \`eval \\\\\$ECHO "X\\\\\$\$var"\` in
-    *[\\\\\\\`\\"\\\$]*)
-      eval "lt_\$var=\\\\\\"\\\`\\\$ECHO \\"X\\\$\$var\\" | \\\$Xsed -e \\"\\\$sed_quote_subst\\"\\\`\\\\\\""
-      ;;
-    *)
-      eval "lt_\$var=\\\\\\"\\\$\$var\\\\\\""
-      ;;
-    esac
-done
-
-# Double-quote double-evaled strings.
-for var in reload_cmds \
-old_postinstall_cmds \
-old_postuninstall_cmds \
-old_archive_cmds \
-extract_expsyms_cmds \
-old_archive_from_new_cmds \
-old_archive_from_expsyms_cmds \
-archive_cmds \
-archive_expsym_cmds \
-module_cmds \
-module_expsym_cmds \
-export_symbols_cmds \
-prelink_cmds \
-postinstall_cmds \
-postuninstall_cmds \
-finish_cmds \
-sys_lib_search_path_spec \
-sys_lib_dlsearch_path_spec; do
-    case \`eval \\\\\$ECHO "X\\\\\$\$var"\` in
-    *[\\\\\\\`\\"\\\$]*)
-      eval "lt_\$var=\\\\\\"\\\`\\\$ECHO \\"X\\\$\$var\\" | \\\$Xsed -e \\"\\\$double_quote_subst\\" -e \\"\\\$sed_quote_subst\\" -e \\"\\\$delay_variable_subst\\"\\\`\\\\\\""
-      ;;
-    *)
-      eval "lt_\$var=\\\\\\"\\\$\$var\\\\\\""
-      ;;
-    esac
-done
-
-# Fix-up fallback echo if it was mangled by the above quoting rules.
-case \$lt_ECHO in
-*'\\\$0 --fallback-echo"')  lt_ECHO=\`\$ECHO "X\$lt_ECHO" | \$Xsed -e 's/\\\\\\\\\\\\\\\$0 --fallback-echo"\$/\$0 --fallback-echo"/'\`
-  ;;
-esac
-
-ac_aux_dir='$ac_aux_dir'
-xsi_shell='$xsi_shell'
-lt_shell_append='$lt_shell_append'
-
-# See if we are running on zsh, and set the options which allow our
-# commands through without removal of \ escapes INIT.
-if test -n "\${ZSH_VERSION+set}" ; then
-   setopt NO_GLOB_SUBST
-fi
-
-
-    PACKAGE='$PACKAGE'
-    VERSION='$VERSION'
-    TIMESTAMP='$TIMESTAMP'
-    RM='$RM'
-    ofile='$ofile'
-
-
-
-_LTEOF
-
-cat >>"$CONFIG_LT" <<\_LTEOF
-{ $as_echo "$as_me:$LINENO: creating $ofile" >&5
-$as_echo "$as_me: creating $ofile" >&6;}
-
-
-    # See if we are running on zsh, and set the options which allow our
-    # commands through without removal of \ escapes.
-    if test -n "${ZSH_VERSION+set}" ; then
-      setopt NO_GLOB_SUBST
-    fi
-
-    cfgfile="${ofile}T"
-    trap "$RM \"$cfgfile\"; exit 1" 1 2 15
-    $RM "$cfgfile"
-
-    cat <<_LT_EOF >> "$cfgfile"
-#! $SHELL
-
-# `$ECHO "$ofile" | sed 's%^.*/%%'` - Provide generalized library-building support services.
-# Generated automatically by $as_me ($PACKAGE$TIMESTAMP) $VERSION
-# Libtool was configured on host `(hostname || uname -n) 2>/dev/null | sed 1q`:
-# NOTE: Changes made to this file will be lost: look at ltmain.sh.
-#
-#   Copyright (C) 1996, 1997, 1998, 1999, 2000, 2001, 2003, 2004, 2005,
-#                 2006, 2007, 2008 Free Software Foundation, Inc.
-#   Written by Gordon Matzigkeit, 1996
-#
-#   This file is part of GNU Libtool.
-#
-# GNU Libtool is free software; you can redistribute it and/or
-# modify it under the terms of the GNU General Public License as
-# published by the Free Software Foundation; either version 2 of
-# the License, or (at your option) any later version.
-#
-# As a special exception to the GNU General Public License,
-# if you distribute this file as part of a program or library that
-# is built using GNU Libtool, you may include this file under the
-# same distribution terms that you use for the rest of that program.
-#
-# GNU Libtool is distributed in the hope that it will be useful,
-# but WITHOUT ANY WARRANTY; without even the implied warranty of
-# MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
-# GNU General Public License for more details.
-#
-# You should have received a copy of the GNU General Public License
-# along with GNU Libtool; see the file COPYING.  If not, a copy
-# can be downloaded from http://www.gnu.org/licenses/gpl.html, or
-# obtained by writing to the Free Software Foundation, Inc.,
-# 51 Franklin Street, Fifth Floor, Boston, MA 02110-1301, USA.
-
-
-# The names of the tagged configurations supported by this script.
-available_tags=""
-
-# ### BEGIN LIBTOOL CONFIG
-
-# Which release of libtool.m4 was used?
-macro_version=$macro_version
-macro_revision=$macro_revision
-
-# Whether or not to build shared libraries.
-build_libtool_libs=$enable_shared
-
-# Whether or not to build static libraries.
-build_old_libs=$enable_static
-
-# What type of objects to build.
-pic_mode=$pic_mode
-
-# Whether or not to optimize for fast installation.
-fast_install=$enable_fast_install
-
-# The host system.
-host_alias=$host_alias
-host=$host
-host_os=$host_os
-
-# The build system.
-build_alias=$build_alias
-build=$build
-build_os=$build_os
-
-# A sed program that does not truncate output.
-SED=$lt_SED
-
-# Sed that helps us avoid accidentally triggering echo(1) options like -n.
-Xsed="\$SED -e 1s/^X//"
-
-# A grep program that handles long lines.
-GREP=$lt_GREP
-
-# An ERE matcher.
-EGREP=$lt_EGREP
-
-# A literal string matcher.
-FGREP=$lt_FGREP
-
-# A BSD- or MS-compatible name lister.
-NM=$lt_NM
-
-# Whether we need soft or hard links.
-LN_S=$lt_LN_S
-
-# What is the maximum length of a command?
-max_cmd_len=$max_cmd_len
-
-# Object file suffix (normally "o").
-objext=$ac_objext
-
-# Executable file suffix (normally "").
-exeext=$exeext
-
-# whether the shell understands "unset".
-lt_unset=$lt_unset
-
-# turn spaces into newlines.
-SP2NL=$lt_lt_SP2NL
-
-# turn newlines into spaces.
-NL2SP=$lt_lt_NL2SP
-
-# How to create reloadable object files.
-reload_flag=$lt_reload_flag
-reload_cmds=$lt_reload_cmds
-
-# An object symbol dumper.
-OBJDUMP=$lt_OBJDUMP
-
-# Method to check whether dependent libraries are shared objects.
-deplibs_check_method=$lt_deplibs_check_method
-
-# Command to use when deplibs_check_method == "file_magic".
-file_magic_cmd=$lt_file_magic_cmd
-
-# The archiver.
-AR=$lt_AR
-AR_FLAGS=$lt_AR_FLAGS
-
-# A symbol stripping program.
-STRIP=$lt_STRIP
-
-# Commands used to install an old-style archive.
-RANLIB=$lt_RANLIB
-old_postinstall_cmds=$lt_old_postinstall_cmds
-old_postuninstall_cmds=$lt_old_postuninstall_cmds
-
-# A C compiler.
-LTCC=$lt_CC
-
-# LTCC compiler flags.
-LTCFLAGS=$lt_CFLAGS
-
-# Take the output of nm and produce a listing of raw symbols and C names.
-global_symbol_pipe=$lt_lt_cv_sys_global_symbol_pipe
-
-# Transform the output of nm in a proper C declaration.
-global_symbol_to_cdecl=$lt_lt_cv_sys_global_symbol_to_cdecl
-
-# Transform the output of nm in a C name address pair.
-global_symbol_to_c_name_address=$lt_lt_cv_sys_global_symbol_to_c_name_address
-
-# Transform the output of nm in a C name address pair when lib prefix is needed.
-global_symbol_to_c_name_address_lib_prefix=$lt_lt_cv_sys_global_symbol_to_c_name_address_lib_prefix
-
-# The name of the directory that contains temporary libtool files.
-objdir=$objdir
-
-# Shell to use when invoking shell scripts.
-SHELL=$lt_SHELL
-
-# An echo program that does not interpret backslashes.
-ECHO=$lt_ECHO
-
-# Used to examine libraries when file_magic_cmd begins with "file".
-MAGIC_CMD=$MAGIC_CMD
-
-# Must we lock files when doing compilation?
-need_locks=$lt_need_locks
-
-# Tool to manipulate archived DWARF debug symbol files on Mac OS X.
-DSYMUTIL=$lt_DSYMUTIL
-
-# Tool to change global to local symbols on Mac OS X.
-NMEDIT=$lt_NMEDIT
-
-# Tool to manipulate fat objects and archives on Mac OS X.
-LIPO=$lt_LIPO
-
-# ldd/readelf like tool for Mach-O binaries on Mac OS X.
-OTOOL=$lt_OTOOL
-
-# ldd/readelf like tool for 64 bit Mach-O binaries on Mac OS X 10.4.
-OTOOL64=$lt_OTOOL64
-
-# Old archive suffix (normally "a").
-libext=$libext
-
-# Shared library suffix (normally ".so").
-shrext_cmds=$lt_shrext_cmds
-
-# The commands to extract the exported symbol list from a shared archive.
-extract_expsyms_cmds=$lt_extract_expsyms_cmds
-
-# Variables whose values should be saved in libtool wrapper scripts and
-# restored at link time.
-variables_saved_for_relink=$lt_variables_saved_for_relink
-
-# Do we need the "lib" prefix for modules?
-need_lib_prefix=$need_lib_prefix
-
-# Do we need a version for libraries?
-need_version=$need_version
-
-# Library versioning type.
-version_type=$version_type
-
-# Shared library runtime path variable.
-runpath_var=$runpath_var
-
-# Shared library path variable.
-shlibpath_var=$shlibpath_var
-
-# Is shlibpath searched before the hard-coded library search path?
-shlibpath_overrides_runpath=$shlibpath_overrides_runpath
-
-# Format of library name prefix.
-libname_spec=$lt_libname_spec
-
-# List of archive names.  First name is the real one, the rest are links.
-# The last name is the one that the linker finds with -lNAME
-library_names_spec=$lt_library_names_spec
-
-# The coded name of the library, if different from the real name.
-soname_spec=$lt_soname_spec
-
-# Command to use after installation of a shared archive.
-postinstall_cmds=$lt_postinstall_cmds
-
-# Command to use after uninstallation of a shared archive.
-postuninstall_cmds=$lt_postuninstall_cmds
-
-# Commands used to finish a libtool library installation in a directory.
-finish_cmds=$lt_finish_cmds
-
-# As "finish_cmds", except a single script fragment to be evaled but
-# not shown.
-finish_eval=$lt_finish_eval
-
-# Whether we should hardcode library paths into libraries.
-hardcode_into_libs=$hardcode_into_libs
-
-# Compile-time system search path for libraries.
-sys_lib_search_path_spec=$lt_sys_lib_search_path_spec
-
-# Run-time system search path for libraries.
-sys_lib_dlsearch_path_spec=$lt_sys_lib_dlsearch_path_spec
-
-# Whether dlopen is supported.
-dlopen_support=$enable_dlopen
-
-# Whether dlopen of programs is supported.
-dlopen_self=$enable_dlopen_self
-
-# Whether dlopen of statically linked programs is supported.
-dlopen_self_static=$enable_dlopen_self_static
-
-# Commands to strip libraries.
-old_striplib=$lt_old_striplib
-striplib=$lt_striplib
-
-
-# The linker used to build libraries.
-LD=$lt_LD
-
-# Commands used to build an old-style archive.
-old_archive_cmds=$lt_old_archive_cmds
-
-# A language specific compiler.
-CC=$lt_compiler
-
-# Is the compiler the GNU compiler?
-with_gcc=$GCC
-
-# Compiler flag to turn off builtin functions.
-no_builtin_flag=$lt_lt_prog_compiler_no_builtin_flag
-
-# How to pass a linker flag through the compiler.
-wl=$lt_lt_prog_compiler_wl
-
-# Additional compiler flags for building library objects.
-pic_flag=$lt_lt_prog_compiler_pic
-
-# Compiler flag to prevent dynamic linking.
-link_static_flag=$lt_lt_prog_compiler_static
-
-# Does compiler simultaneously support -c and -o options?
-compiler_c_o=$lt_lt_cv_prog_compiler_c_o
-
-# Whether or not to add -lc for building shared libraries.
-build_libtool_need_lc=$archive_cmds_need_lc
-
-# Whether or not to disallow shared libs when runtime libs are static.
-allow_libtool_libs_with_static_runtimes=$enable_shared_with_static_runtimes
-
-# Compiler flag to allow reflexive dlopens.
-export_dynamic_flag_spec=$lt_export_dynamic_flag_spec
-
-# Compiler flag to generate shared objects directly from archives.
-whole_archive_flag_spec=$lt_whole_archive_flag_spec
-
-# Whether the compiler copes with passing no objects directly.
-compiler_needs_object=$lt_compiler_needs_object
-
-# Create an old-style archive from a shared archive.
-old_archive_from_new_cmds=$lt_old_archive_from_new_cmds
-
-# Create a temporary old-style archive to link instead of a shared archive.
-old_archive_from_expsyms_cmds=$lt_old_archive_from_expsyms_cmds
-
-# Commands used to build a shared archive.
-archive_cmds=$lt_archive_cmds
-archive_expsym_cmds=$lt_archive_expsym_cmds
-
-# Commands used to build a loadable module if different from building
-# a shared archive.
-module_cmds=$lt_module_cmds
-module_expsym_cmds=$lt_module_expsym_cmds
-
-# Whether we are building with GNU ld or not.
-with_gnu_ld=$lt_with_gnu_ld
-
-# Flag that allows shared libraries with undefined symbols to be built.
-allow_undefined_flag=$lt_allow_undefined_flag
-
-# Flag that enforces no undefined symbols.
-no_undefined_flag=$lt_no_undefined_flag
-
-# Flag to hardcode \$libdir into a binary during linking.
-# This must work even if \$libdir does not exist
-hardcode_libdir_flag_spec=$lt_hardcode_libdir_flag_spec
-
-# If ld is used when linking, flag to hardcode \$libdir into a binary
-# during linking.  This must work even if \$libdir does not exist.
-hardcode_libdir_flag_spec_ld=$lt_hardcode_libdir_flag_spec_ld
-
-# Whether we need a single "-rpath" flag with a separated argument.
-hardcode_libdir_separator=$lt_hardcode_libdir_separator
-
-# Set to "yes" if using DIR/libNAME\${shared_ext} during linking hardcodes
-# DIR into the resulting binary.
-hardcode_direct=$hardcode_direct
-
-# Set to "yes" if using DIR/libNAME\${shared_ext} during linking hardcodes
-# DIR into the resulting binary and the resulting library dependency is
-# "absolute",i.e impossible to change by setting \${shlibpath_var} if the
-# library is relocated.
-hardcode_direct_absolute=$hardcode_direct_absolute
-
-# Set to "yes" if using the -LDIR flag during linking hardcodes DIR
-# into the resulting binary.
-hardcode_minus_L=$hardcode_minus_L
-
-# Set to "yes" if using SHLIBPATH_VAR=DIR during linking hardcodes DIR
-# into the resulting binary.
-hardcode_shlibpath_var=$hardcode_shlibpath_var
-
-# Set to "yes" if building a shared library automatically hardcodes DIR
-# into the library and all subsequent libraries and executables linked
-# against it.
-hardcode_automatic=$hardcode_automatic
-
-# Set to yes if linker adds runtime paths of dependent libraries
-# to runtime path list.
-inherit_rpath=$inherit_rpath
-
-# Whether libtool must link a program against all its dependency libraries.
-link_all_deplibs=$link_all_deplibs
-
-# Fix the shell variable \$srcfile for the compiler.
-fix_srcfile_path=$lt_fix_srcfile_path
-
-# Set to "yes" if exported symbols are required.
-always_export_symbols=$always_export_symbols
-
-# The commands to list exported symbols.
-export_symbols_cmds=$lt_export_symbols_cmds
-
-# Symbols that should not be listed in the preloaded symbols.
-exclude_expsyms=$lt_exclude_expsyms
-
-# Symbols that must always be exported.
-include_expsyms=$lt_include_expsyms
-
-# Commands necessary for linking programs (against libraries) with templates.
-prelink_cmds=$lt_prelink_cmds
-
-# Specify filename containing input files.
-file_list_spec=$lt_file_list_spec
-
-# How to hardcode a shared library path into an executable.
-hardcode_action=$hardcode_action
-
-# ### END LIBTOOL CONFIG
-
-_LT_EOF
-
-  case $host_os in
-  aix3*)
-    cat <<\_LT_EOF >> "$cfgfile"
-# AIX sometimes has problems with the GCC collect2 program.  For some
-# reason, if we set the COLLECT_NAMES environment variable, the problems
-# vanish in a puff of smoke.
-if test "X${COLLECT_NAMES+set}" != Xset; then
-  COLLECT_NAMES=
-  export COLLECT_NAMES
-fi
-_LT_EOF
-    ;;
-  esac
-
-
-ltmain="$ac_aux_dir/ltmain.sh"
-
-
-  # We use sed instead of cat because bash on DJGPP gets confused if
-  # if finds mixed CR/LF and LF-only lines.  Since sed operates in
-  # text mode, it properly converts lines to CR/LF.  This bash problem
-  # is reportedly fixed, but why not run on old versions too?
-  sed '/^# Generated shell functions inserted here/q' "$ltmain" >> "$cfgfile" \
-    || (rm -f "$cfgfile"; exit 1)
-
-  case $xsi_shell in
-  yes)
-    cat << \_LT_EOF >> "$cfgfile"
-
-# func_dirname file append nondir_replacement
-# Compute the dirname of FILE.  If nonempty, add APPEND to the result,
-# otherwise set result to NONDIR_REPLACEMENT.
-func_dirname ()
-{
-  case ${1} in
-    */*) func_dirname_result="${1%/*}${2}" ;;
-    *  ) func_dirname_result="${3}" ;;
-  esac
-}
-
-# func_basename file
-func_basename ()
-{
-  func_basename_result="${1##*/}"
-}
-
-# func_dirname_and_basename file append nondir_replacement
-# perform func_basename and func_dirname in a single function
-# call:
-#   dirname:  Compute the dirname of FILE.  If nonempty,
-#             add APPEND to the result, otherwise set result
-#             to NONDIR_REPLACEMENT.
-#             value returned in "$func_dirname_result"
-#   basename: Compute filename of FILE.
-#             value retuned in "$func_basename_result"
-# Implementation must be kept synchronized with func_dirname
-# and func_basename. For efficiency, we do not delegate to
-# those functions but instead duplicate the functionality here.
-func_dirname_and_basename ()
-{
-  case ${1} in
-    */*) func_dirname_result="${1%/*}${2}" ;;
-    *  ) func_dirname_result="${3}" ;;
-  esac
-  func_basename_result="${1##*/}"
-}
-
-# func_stripname prefix suffix name
-# strip PREFIX and SUFFIX off of NAME.
-# PREFIX and SUFFIX must not contain globbing or regex special
-# characters, hashes, percent signs, but SUFFIX may contain a leading
-# dot (in which case that matches only a dot).
-func_stripname ()
-{
-  # pdksh 5.2.14 does not do ${X%$Y} correctly if both X and Y are
-  # positional parameters, so assign one to ordinary parameter first.
-  func_stripname_result=${3}
-  func_stripname_result=${func_stripname_result#"${1}"}
-  func_stripname_result=${func_stripname_result%"${2}"}
-}
-
-# func_opt_split
-func_opt_split ()
-{
-  func_opt_split_opt=${1%%=*}
-  func_opt_split_arg=${1#*=}
-}
-
-# func_lo2o object
-func_lo2o ()
-{
-  case ${1} in
-    *.lo) func_lo2o_result=${1%.lo}.${objext} ;;
-    *)    func_lo2o_result=${1} ;;
-  esac
-}
-
-# func_xform libobj-or-source
-func_xform ()
-{
-  func_xform_result=${1%.*}.lo
-}
-
-# func_arith arithmetic-term...
-func_arith ()
-{
-  func_arith_result=$(( $* ))
-}
-
-# func_len string
-# STRING may not start with a hyphen.
-func_len ()
-{
-  func_len_result=${#1}
-}
-
-_LT_EOF
-    ;;
-  *) # Bourne compatible functions.
-    cat << \_LT_EOF >> "$cfgfile"
-
-# func_dirname file append nondir_replacement
-# Compute the dirname of FILE.  If nonempty, add APPEND to the result,
-# otherwise set result to NONDIR_REPLACEMENT.
-func_dirname ()
-{
-  # Extract subdirectory from the argument.
-  func_dirname_result=`$ECHO "X${1}" | $Xsed -e "$dirname"`
-  if test "X$func_dirname_result" = "X${1}"; then
-    func_dirname_result="${3}"
-  else
-    func_dirname_result="$func_dirname_result${2}"
-  fi
-}
-
-# func_basename file
-func_basename ()
-{
-  func_basename_result=`$ECHO "X${1}" | $Xsed -e "$basename"`
-}
-
-
-# func_stripname prefix suffix name
-# strip PREFIX and SUFFIX off of NAME.
-# PREFIX and SUFFIX must not contain globbing or regex special
-# characters, hashes, percent signs, but SUFFIX may contain a leading
-# dot (in which case that matches only a dot).
-# func_strip_suffix prefix name
-func_stripname ()
-{
-  case ${2} in
-    .*) func_stripname_result=`$ECHO "X${3}" \
-           | $Xsed -e "s%^${1}%%" -e "s%\\\\${2}\$%%"`;;
-    *)  func_stripname_result=`$ECHO "X${3}" \
-           | $Xsed -e "s%^${1}%%" -e "s%${2}\$%%"`;;
-  esac
-}
-
-# sed scripts:
-my_sed_long_opt='1s/^\(-[^=]*\)=.*/\1/;q'
-my_sed_long_arg='1s/^-[^=]*=//'
-
-# func_opt_split
-func_opt_split ()
-{
-  func_opt_split_opt=`$ECHO "X${1}" | $Xsed -e "$my_sed_long_opt"`
-  func_opt_split_arg=`$ECHO "X${1}" | $Xsed -e "$my_sed_long_arg"`
-}
-
-# func_lo2o object
-func_lo2o ()
-{
-  func_lo2o_result=`$ECHO "X${1}" | $Xsed -e "$lo2o"`
-}
-
-# func_xform libobj-or-source
-func_xform ()
-{
-  func_xform_result=`$ECHO "X${1}" | $Xsed -e 's/\.[^.]*$/.lo/'`
-}
-
-# func_arith arithmetic-term...
-func_arith ()
-{
-  func_arith_result=`expr "$@"`
-}
-
-# func_len string
-# STRING may not start with a hyphen.
-func_len ()
-{
-  func_len_result=`expr "$1" : ".*" 2>/dev/null || echo $max_cmd_len`
-}
-
-_LT_EOF
-esac
-
-case $lt_shell_append in
-  yes)
-    cat << \_LT_EOF >> "$cfgfile"
-
-# func_append var value
-# Append VALUE to the end of shell variable VAR.
-func_append ()
-{
-  eval "$1+=\$2"
-}
-_LT_EOF
-    ;;
-  *)
-    cat << \_LT_EOF >> "$cfgfile"
-
-# func_append var value
-# Append VALUE to the end of shell variable VAR.
-func_append ()
-{
-  eval "$1=\$$1\$2"
-}
-
-_LT_EOF
-    ;;
-  esac
-
-
-  sed -n '/^# Generated shell functions inserted here/,$p' "$ltmain" >> "$cfgfile" \
-    || (rm -f "$cfgfile"; exit 1)
-
-  mv -f "$cfgfile" "$ofile" ||
-    (rm -f "$ofile" && cp "$cfgfile" "$ofile" && rm -f "$cfgfile")
-  chmod +x "$ofile"
-
-
-{ (exit 0); exit 0; }
-_LTEOF
-chmod +x "$CONFIG_LT"
-
-# configure is writing to config.log, but config.lt does its own redirection,
-# appending to config.log, which fails on DOS, as config.log is still kept
-# open by configure.  Here we exec the FD to /dev/null, effectively closing
-# config.log, so it can be properly (re)opened and appended to by config.lt.
-if test "$no_create" != yes; then
-  lt_cl_success=:
-  test "$silent" = yes &&
-    lt_config_lt_args="$lt_config_lt_args --quiet"
-  exec 5>/dev/null
-  $SHELL "$CONFIG_LT" $lt_config_lt_args || lt_cl_success=false
-  exec 5>>config.log
-  $lt_cl_success || { (exit 1); exit 1; }
-fi
-
-ac_ext=c
-ac_cpp='$CPP $CPPFLAGS'
-ac_compile='$CC -c $CFLAGS $CPPFLAGS conftest.$ac_ext >&5'
-ac_link='$CC -o conftest$ac_exeext $CFLAGS $CPPFLAGS $LDFLAGS conftest.$ac_ext $LIBS >&5'
-ac_compiler_gnu=$ac_cv_c_compiler_gnu
-ac_link="./libtool --mode=link --tag=CC $ac_link"
-
-## _KPSE_LIB_FLAGS: Setup kpathsea (-lkpathsea) flags
-
-# Check whether --with-system-kpathsea was given.
-if test "${with_system_kpathsea+set}" = set; then
-  withval=$with_system_kpathsea;
-fi
-
-# Check whether --with-kpathsea-includes was given.
-if test "${with_kpathsea_includes+set}" = set; then
-  withval=$with_kpathsea_includes;
-fi
-
-# Check whether --with-kpathsea-libdir was given.
-if test "${with_kpathsea_libdir+set}" = set; then
-  withval=$with_kpathsea_libdir;
-fi
-if test "x$with_system_kpathsea" = xyes; then
-  if test "x$with_kpathsea_includes" != x && test "x$with_kpathsea_includes" != xyes; then
-  KPATHSEA_INCLUDES="-I$with_kpathsea_includes"
-fi
-KPATHSEA_LIBS="-lkpathsea"
-if test "x$with_kpathsea_libdir" != x && test "x$with_kpathsea_libdir" != xyes; then
-  KPATHSEA_LIBS="-L$with_kpathsea_libdir $KPATHSEA_LIBS"
-fi
-else
-  KPATHSEA_INCLUDES=`echo '-IBLD/texk -ISRC/texk' | sed \
-    -e "s,SRC/,$kpse_SRC/,g" \
-    -e "s,BLD/,$kpse_BLD/,g"`
-  KPATHSEA_LIBS=`echo 'BLD/texk/kpathsea/libkpathsea.la' | sed \
-    -e "s,BLD/,$kpse_BLD/,g"`
-  KPATHSEA_DEPEND=`echo 'BLD/texk/kpathsea/libkpathsea.la' | sed \
-    -e 's,BLD/texk/,${top_builddir}/../,g'`
-   KPATHSEA_RULE='# Rebuild libkpathsea
-$(KPATHSEA_DEPEND): ${top_srcdir}/../kpathsea/*.[ch] ${top_builddir}/../kpathsea/paths.h
-	cd ${top_builddir}/../kpathsea && $(MAKE) $(AM_MAKEFLAGS)
-${top_builddir}/../kpathsea/paths.h:
-	cd ${top_builddir}/../kpathsea && $(MAKE) $(AM_MAKEFLAGS)'
-fi
+ac_config_headers="$ac_config_headers config.h"
 
 
 ac_config_files="$ac_config_files Makefile"
@@ -15272,7 +13921,6 @@ fi
     RM='$RM'
     ofile='$ofile'
 
-ac_aux_dir='$ac_aux_dir'
 
 
 
@@ -15286,7 +13934,7 @@ do
   case $ac_config_target in
     "depfiles") CONFIG_COMMANDS="$CONFIG_COMMANDS depfiles" ;;
     "libtool") CONFIG_COMMANDS="$CONFIG_COMMANDS libtool" ;;
-    "c-auto.h") CONFIG_HEADERS="$CONFIG_HEADERS c-auto.h:c-auto.in" ;;
+    "config.h") CONFIG_HEADERS="$CONFIG_HEADERS config.h" ;;
     "Makefile") CONFIG_FILES="$CONFIG_FILES Makefile" ;;
 
   *) { { $as_echo "$as_me:$LINENO: error: invalid argument: $ac_config_target" >&5
diff --git a/Build/source/texk/lacheck/configure.ac b/Build/source/texk/lacheck/configure.ac
index 3b3acfe67e9..d9994b3fb27 100644
--- a/Build/source/texk/lacheck/configure.ac
+++ b/Build/source/texk/lacheck/configure.ac
@@ -21,9 +21,7 @@ KPSE_COMMON([lacheck])
 
 KPSE_PROG_LEX
 
-AC_CONFIG_HEADERS([c-auto.h:c-auto.in])
-
-KPSE_KPATHSEA_FLAGS
+AC_CONFIG_HEADERS([config.h])
 
 AC_CONFIG_FILES([Makefile])