texk 1

git-svn-id: svn://tug.org/texlive/trunk@1485 c570f23f-e606-0410-a88d-b1316a301751

1 files changed, 559 insertions, 0 deletions

diff --git a/Build/source/texk/kpathsea/texmf.in b/Build/source/texk/kpathsea/texmf.in
new file mode 100644
index 00000000000..f9e7b3f9b44
--- /dev/null
+++ b/Build/source/texk/kpathsea/texmf.in
@@ -0,0 +1,559 @@
+% original texmf.cnf -- runtime path configuration file for kpathsea.
+% (If you change or delete `original' on the previous line, the
+% distribution won't install its version over yours.)
+% Public domain.
+% 
+% What follows is a super-summary of what this .cnf file can
+% contain. Please read the Kpathsea manual for more information.
+% 
+% texmf.cnf is generated from texmf.in, by replacing @var@ with the
+% value of the Make variable `var', via a sed file texmf.sed, generated
+% (once) by kpathsea/Makefile (itself generated from kpathsea/Makefile.in
+% by configure).
+% 
+% Any identifier (sticking to A-Za-z_ for names is safest) can be assigned.
+% The `=' (and surrounding spaces) is optional.
+% No % or @ in texmf.in, for the sake of autogeneration.
+% (However, %'s and @'s can be edited into texmf.cnf or put in envvar values.)
+% $foo (or ${foo}) in a value expands to the envvar or cnf value of foo.
+% 
+% Earlier entries (in the same or another file) override later ones, and
+% an environment variable foo overrides any texmf.cnf definition of foo.
+% 
+% All definitions are read before anything is expanded, so you can use
+% variables before they are defined. 
+% 
+% If a variable assignment is qualified with `.PROGRAM', it is ignored
+% unless the current executable (last filename component of argv[0]) is
+% named PROGRAM.  This foo.PROGRAM construct is not recognized on the
+% right-hand side. For environment variables, use FOO_PROGRAM.
+% 
+% Which file formats use which paths for searches is described in the
+% various programs' and the kpathsea documentation.
+% 
+% // means to search subdirectories (recursively).
+% A leading !! means to look only in the ls-R db, never on the disk.
+% A leading/trailing/doubled ; in the paths will be expanded into the
+%   compile-time default. Probably not what you want.
+% 
+% You can use brace notation, for example: /usr/local/{mytex:othertex}
+% expands to /usr/local/mytex:/usr/local/othertex.  Instead of the path
+% separator you can use a comma: /usr/local/{mytex,othertex} also expands
+% to /usr/local/mytex:/usr/local/othertex.  However, the use of the comma
+% instead of the path separator is deprecated.
+%
+% The text above assumes thet path separator is a colon (:).  Non-UNIX
+% systems use different path separators, like the semicolon (;).
+
+%  Part 1: Search paths and directories.
+
+% You can set an environment variable to override TEXMF if you're testing
+% a new TeX tree, without changing anything else.
+% 
+% You may wish to use one of the $SELFAUTO... variables here so TeX will
+% find where to look dynamically.  See the manual and the definition
+% below of TEXMFCNF.
+
+% The tree containing the runtime files closely related to the specific
+% program version used:
+TEXMFMAIN = @texmf@
+
+% The main distribution tree:
+TEXMFDIST = @texmf@-dist
+
+% A place for local additions to a "standard" texmf tree.
+% This tree is not used for local configuration maintained by
+% texconfig, it uses TEXMFCONFIG below.
+TEXMFLOCAL = @texmf@-local
+
+% TEXMFSYSVAR, where texconfig-sys stores variable runtime data.
+% With teTeX-3.0 or later, this must be set.
+% For sharing this tree with $TEXMFMAIN:
+%   TEXMFSYSVAR = $TEXMFMAIN
+% For using a separate tree:
+%   TEXMFSYSVAR = @texmf@-var
+TEXMFSYSVAR = @texmf@-var
+
+% TEXMFSYSCONFIG, where texconfig-sys stores configuration data.
+% With teTeX-3.0 or later, this must be set.
+% For sharing this tree with $TEXMFMAIN:
+%   TEXMFSYSCONFIG = $TEXMFMAIN
+% For using a separate tree:
+%   TEXMFSYSCONFIG = @texmf@-config
+TEXMFSYSCONFIG = @texmf@-config
+
+% User texmf trees can be catered for like this...
+% This used to be HOMETEXMF.
+TEXMFHOME = $HOME/texmf
+
+% TEXMFVAR, where texconfig stores variable runtime data.
+% With teTeX-3.0 or later, this must be set.
+% For sharing this tree with $TEXMFMAIN:
+%   TEXMFVAR = $TEXMFMAIN
+% For using a separate tree:
+%   TEXMFVAR = $HOME/.texmf-var
+TEXMFVAR = $HOME/.texmf-var
+
+% TEXMFCONFIG, where texconfig stores configuration data.
+% With teTeX-3.0 or later, this must be set.
+% For sharing this tree with $TEXMFMAIN:
+%   TEXMFCONFIG = $TEXMFMAIN
+% For using a separate tree:
+%   TEXMFCONFIG = $HOME/.texmf-config
+% For using a separate tree:
+%   TEXMFCONFIG = @texmf@-config
+TEXMFCONFIG = $HOME/.texmf-config
+
+% Now, list all the texmf trees. If you have multiple trees you can
+% use shell brace notation, like this:
+%   TEXMF = {$TEXMFHOME,!!$TEXMFLOCAL,!!$TEXMFMAIN}
+% The braces are necessary.
+%
+% For texconfig to work properly, TEXMFCONFIG and TEXMFVAR should be named
+% explicitly and before all other trees.
+TEXMF = {!!$TEXMFCONFIG,!!$TEXMFVAR,$TEXMFHOME,!!$TEXMFSYSCONFIG,!!$TEXMFSYSVAR,!!$TEXMFMAIN,!!$TEXMFLOCAL,!!$TEXMFDIST}
+
+% The system trees.  These are the trees that are shared by all the users.
+SYSTEXMF = $TEXMFLOCAL;$TEXMFMAIN;$TEXMFDIST
+
+% Where generated fonts may be written.  This tree is used when the sources
+% were found in a system tree and either that tree wasn't writable, or the
+% varfonts feature was enabled in MT_FEATURES in mktex.cnf.
+VARTEXFONTS = @vartexfonts@
+
+% Where to look for ls-R files.  There need not be an ls-R in the
+% directories in this path, but if there is one, Kpathsea will use it.
+%
+% Remove $VARTEXFONTS from TEXMFDBS if the VARTEXFONTS directory is below
+% one of the TEXMF directories (avoids overlapping ls-R files).
+TEXMFDBS = $TEXMF;$VARTEXFONTS
+
+% It may be convenient to define TEXMF like this:
+%   TEXMF = {$TEXMFHOME,!!$TEXMFLOCAL,!!$TEXMFMAIN,$HOME}
+% which allows users to set up entire texmf trees, and tells TeX to
+% look in places like ~/tex and ~/bibtex.  If you do this, define TEXMFDBS
+% like this:
+%   TEXMFDBS = $TEXMFHOME;$TEXMFLOCAL;$TEXMFMAIN;$VARTEXFONTS
+% or mktexlsr will generate an ls-R file for $HOME when called, which is
+% rarely desirable.  If you do this you'll want to define SYSTEXMF like
+% this:
+%   SYSTEXMF = $TEXMFLOCAL;$TEXMFMAIN;$TEXMFDIST
+% so that fonts from a user's tree won't escape into the global trees.
+%
+% On some systems, there will be a system tree which contains all the font
+% files that may be created as well as the formats.  For example
+%   TEXMFVAR = /var/lib/texmf
+% is used on many Linux systems.  In this case, set VARTEXFONTS like this
+%   VARTEXFONTS = $TEXMFVAR/fonts
+% and do not mention it in TEXMFDBS (but _do_ mention TEXMFVAR).
+
+
+%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%
+% Usually you will not need to edit any of the other variables in part 1. %
+%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%
+
+% WEB2C is for Web2C specific files.  The current directory may not be
+% a good place to look for them.
+WEB2C = $TEXMF/web2c
+
+% TEXINPUTS is for TeX input files -- i.e., anything to be found by \input
+% or \openin, including .sty, .eps, etc. 
+
+% Plain TeX.  Have the command tex check all directories as a last
+% resort, we may have plain-compatible stuff anywhere.
+TEXINPUTS.tex = .;$TEXMF/tex/{plain,generic,}//
+
+% Other plain-based formats.
+TEXINPUTS.amstex = .;$TEXMF/tex/{amstex,plain,generic,}//
+TEXINPUTS.csplain = .;$TEXMF/tex/{csplain,plain,generic,}//
+TEXINPUTS.eplain  = .;$TEXMF/tex/{eplain,plain,generic,}//
+TEXINPUTS.ftex = .;$TEXMF/tex/{formate,plain,generic,}//
+TEXINPUTS.jadetex = .;$TEXMF/tex/{jadetex,plain,generic,}//
+TEXINPUTS.mex = .;$TEXMF/tex/{mex,plain,generic,}//
+TEXINPUTS.texinfo = .;$TEXMF/tex/{texinfo,plain,generic,}//
+
+% LaTeX 2e specific macros are stored in latex/, macros that can only be
+% used with 2.09 in latex209/.  In addition, we look in the directory
+% latex209, useful for macros that were written for 2.09 and do not
+% mention 2e at all, but can be used with 2e.
+TEXINPUTS.cslatex = .;$TEXMF/tex/{cslatex,csplain,latex,generic,}//
+TEXINPUTS.platex  = .;$TEXMF/tex/{platex,latex,generic,}//
+TEXINPUTS.latex = .;$TEXMF/tex/{latex,generic,}//
+TEXINPUTS.olatex = .;$TEXMF/tex/{latex,generic,}//
+TEXINPUTS.latex209 = .;$TEXMF/tex/{latex209,generic,latex,}//
+
+% Fontinst needs to read afm files.
+TEXINPUTS.fontinst = .;$TEXMF/{tex,fonts/afm}//
+
+% MLTeX.
+TEXINPUTS.frlatex = .;$TEXMF/tex/{french,latex,generic,}//
+TEXINPUTS.frtex   = .;$TEXMF/tex/{french,plain,generic,}//
+TEXINPUTS.mllatex = .;$TEXMF/tex/{latex,generic,}//
+TEXINPUTS.mltex = .;$TEXMF/tex/{plain,generic,}//
+
+% e-TeX.  This form of the input paths is borrowed from teTeX.  A certain
+% variant of TDS is assumed here, unaffected by the build variables.
+TEXINPUTS.elatex   = .;$TEXMF/tex/{latex,generic,}//
+TEXINPUTS.etex     = .;$TEXMF/tex/{plain,generic,}//
+
+% pdfTeX.  This form of the input paths is borrowed from teTeX.  A certain
+% variant of TDS is assumed here, unaffected by the build variables.
+TEXINPUTS.pdfcslatex = .;$TEXMF/tex/{cslatex,csplain,latex,generic,}//
+TEXINPUTS.pdfcsplain = .;$TEXMF/tex/{csplain,plain,generic,}//
+TEXINPUTS.pdfjadetex = .;$TEXMF/tex/{jadetex,plain,generic,}//
+TEXINPUTS.pdflatex = .;$TEXMF/tex/{latex,generic,}//
+TEXINPUTS.pdfmex   = .;$TEXMF/tex/{mex,plain,generic,}//
+TEXINPUTS.utf8mex   = .;$TEXMF/tex/{mex,plain,generic,}//
+TEXINPUTS.pdftex   = .;$TEXMF/tex/{plain,generic,}//
+TEXINPUTS.pdftexinfo = .;$TEXMF/tex/{texinfo,plain,generic,}//
+TEXINPUTS.pdfamstex = .;$TEXMF/tex/{amstex,plain,generic,}//
+
+% pdfeTeX.
+TEXINPUTS.pdfelatex = .;$TEXMF/tex/{latex,generic,}//
+TEXINPUTS.pdfetex   = .;$TEXMF/tex/{plain,generic,}//
+
+% pdfxTeX.
+TEXINPUTS.pdfxlatex = .;$TEXMF/tex/{latex,generic,}//
+TEXINPUTS.pdfxtex   = .;$TEXMF/tex/{plain,generic,}//
+
+% XeTeX
+TEXINPUTS.xelatex = .;$TEXMF/tex/{latex,generic,}//
+TEXINPUTS.xetex   = .;$TEXMF/tex/{plain,generic,}//
+
+% Omega / Aleph
+TEXINPUTS.lamed = .;$TEXMF/tex/{lamed,lambda,latex,generic,}//
+TEXINPUTS.lambda = .;$TEXMF/tex/{lambda,latex,generic,}//
+TEXINPUTS.omega = .;$TEXMF/tex/{plain,generic,}//
+TEXINPUTS.aleph = .;$TEXMF/tex/{plain,generic,}//
+
+% Context macros by Hans Hagen:
+TEXINPUTS.context = .;$TEXMF/tex/{context,plain,generic,}//
+
+% odd formats  needing their own paths
+TEXINPUTS.lamstex  = .;$TEXMF/tex/{lamstex,plain,generic,}//
+TEXINPUTS.lollipop = .;$TEXMF/tex/{lollipop,plain,generic,}//
+TEXINPUTS.platex-pl  = .;$TEXMF/tex/{platex,latex,generic,}//
+TEXINPUTS.pdfplatex = .;$TEXMF/tex/{platex,latex,generic,}//
+
+% Earlier entries override later ones, so put this last.
+TEXINPUTS = .;$TEXMF/tex/{$progname,generic,}//
+
+% Metafont, MetaPost inputs.
+MFINPUTS = .;$TEXMF/metafont//;{$TEXMF/fonts,$VARTEXFONTS}/source//
+MPINPUTS = .;$TEXMF/metapost//
+
+% Dump files (fmt/base/mem) for vir{tex,mf,mp} to read (see web2c/INSTALL),
+% and string pools (.pool) for ini{tex,mf,mp}.  It is silly that we have six
+% paths and directories here (they all resolve to a single place by default),
+% but historically ...
+TEXFORMATS = .;$TEXMF/web2c
+MFBASES = .;$TEXMF/web2c
+MPMEMS = .;$TEXMF/web2c
+TEXPOOL = .;$TEXMF/web2c
+MFPOOL = .;$TEXMF/web2c
+MPPOOL = .;$TEXMF/web2c
+
+% Device-independent font metric files.
+VFFONTS = .;$TEXMF/fonts/vf//
+TFMFONTS = .;{$TEXMF/fonts,$VARTEXFONTS}/tfm//
+
+% The $MAKETEX_MODE below means the drivers will not use a cx font when
+% the mode is ricoh.  If no mode is explicitly specified, kpse_prog_init
+% sets MAKETEX_MODE to /, so all subdirectories are searched.  See the manual.
+% The modeless part guarantees that bitmaps for PostScript fonts are found.
+PKFONTS = .;{$TEXMF/fonts,$VARTEXFONTS}/pk/{$MAKETEX_MODE,modeless}//
+
+% Similarly for the GF format, which only remains in existence because
+% Metafont outputs it (and MF isn't going to change).
+GFFONTS = .;$TEXMF/fonts/gf/$MAKETEX_MODE//
+
+% A backup for PKFONTS and GFFONTS. Not used for anything.
+GLYPHFONTS = .;$TEXMF/fonts
+
+% A place to puth everything that doesn't fit the other font categories.
+MISCFONTS = .;$TEXMF/fonts/misc//
+
+% font name map files.
+TEXFONTMAPS = .;$TEXMF/fonts/map//
+
+% support non"k"-xdvi:
+PKFONTS.XDvi    = .:$TEXMF/%s:$VARTEXFONTS/pk/{%m,modeless}//
+VFFONTS.XDvi    = .:$TEXMF/%s 
+PSHEADERS.XDvi  = .:$TEXMF/%q{dvips,fonts/type1}//
+TEXPICTS.XDvi   = .:$TEXMF/%q{dvips,tex}//
+
+% BibTeX bibliographies and style files.
+BIBINPUTS = .;$TEXMF/bibtex/bib//
+BSTINPUTS = .;$TEXMF/bibtex/bst//
+
+% MFT style files.
+MFTINPUTS = .;$TEXMF/mft//
+
+% PostScript headers and prologues (.pro); unfortunately, some programs
+% also use this for acessing font files (enc, type1, truetype)
+TEXPSHEADERS = .;$TEXMF/{dvips,fonts/{enc,type1,type3}}//
+TEXPSHEADERS.gsftopk = .;$TEXMF/{dvips,fonts/{enc,type1,type3,truetype}}//
+
+% PostScript Type 1 outline fonts.
+T1FONTS = .;$TEXMF/fonts/type1//
+
+% PostScript AFM metric files.
+AFMFONTS = .;$TEXMF/fonts/afm//
+
+% TrueType outline fonts.
+TTFONTS = .;$TEXMF/fonts/truetype//
+
+% Type 42 outline fonts.
+T42FONTS = .;$TEXMF/fonts/type42//
+
+% Ligature definition files.
+LIGFONTS =  .;$TEXMF/fonts/lig//
+
+% Dvips' config.* files (this name should not start with `TEX'!).
+TEXCONFIG = $TEXMF/dvips//
+
+% Makeindex style (.ist) files.
+INDEXSTYLE = .;$TEXMF/makeindex//
+
+% Font encoding files (.enc).
+ENCFONTS = .;$TEXMF/fonts/enc//
+
+% CMap files.
+CMAPFONTS = .;$TEXMF/fonts/cmap//
+
+% Subfont definition files.
+SFDFONTS = .;$TEXMF/fonts/sfd//
+
+% Opentype outline fonts.
+OPENTYPEFONTS = .;$TEXMF/fonts/opentype//
+
+% pdftex config files:
+PDFTEXCONFIG = .;$TEXMF/pdftex/{$progname,}//
+
+% Used by DMP (ditroff-to-mpx), called by makempx -troff.
+% The path given is correct for GROFF on Linux installed under /usr.
+% Originally: TRFONTS = /usr/lib/font/devpost
+TRFONTS = /usr/share/groff/current/font/devps
+MPSUPPORT = .;$TEXMF/metapost/support
+
+% For xdvi to find mime.types and .mailcap, if they do not exist in
+% $HOME.  These are single directories, not paths.
+% (But the default mime.types, at least, may well suffice.)
+MIMELIBDIR = @prefix@/etc
+MAILCAPLIBDIR = @prefix@/etc
+
+% TeX documentation and source files, for use with kpsewhich.
+TEXDOCS = .;$TEXMF/doc//
+TEXSOURCES = .;$TEXMF/source//
+
+% Web and CWeb input paths.
+WEBINPUTS = .;$TEXMF/web//
+CWEBINPUTS = .;$TEXMF/cweb//
+
+% Omega-related fonts and other files.  The odd construction for OFMFONTS
+% makes it behave in the face of a definition of TFMFONTS.  Unfortunately
+% no default substitution would take place for TFMFONTS, so an explicit
+% path is retained.
+OFMFONTS = .;{$TEXMF/fonts,$VARTEXFONTS}/{ofm,tfm}//;$TFMFONTS
+OPLFONTS = .;{$TEXMF/fonts,$VARTEXFONTS}/opl//
+OVFFONTS = .;{$TEXMF/fonts,$VARTEXFONTS}/ovf//
+OVPFONTS = .;{$TEXMF/fonts,$VARTEXFONTS}/ovp//
+OTPINPUTS = .;$TEXMF/omega/otp//
+OCPINPUTS = .;$TEXMF/omega/ocp//
+
+% Some additional input variables for several programs.  If you add
+% a program that uses the 'other text files' or 'other binary files'
+% search formats, you'll want to add their variables here as well.
+T4HTINPUTS   = .;$TEXMF/tex4ht//
+
+% Architecture independent executables
+TEXMFSCRIPTS = $TEXMF/scripts//
+
+%% The mktex* scripts rely on KPSE_DOT. Do not set it in the environment.
+% KPSE_DOT = .
+
+% This definition isn't used from this .cnf file itself (that would be
+% paradoxical), but the compile-time default in paths.h is built from it.
+% The SELFAUTO* variables are set automatically from the location of
+% argv[0], in kpse_set_progname.  
+% 
+% The TETEXDIR stuff isn't likely to relevant unless you're using teTeX,
+% but it doesn't hurt.
+%
+% For security reasons, it is better not to have . part of the path.
+% 
+TEXMFCNF = {$SELFAUTOLOC,$SELFAUTODIR,$SELFAUTOPARENT}{,{/share,}/texmf{-local,}/web2c};$TETEXDIR;$TEXMF/web2c;@web2c@
+
+# $progname: kpathsea v. 3.5.3 or later overwrites this at runtime. To
+# avoid empty expansions from binaries linked against an earlier
+# version of the library, we set $progname and $engine to something
+# non-empty:
+progname = unset
+engine = unset
+
+
+%  Part 2: Non-path options.
+
+% Write .log/.dvi/etc. files here, if the current directory is unwritable.
+% TEXMFOUTPUT = /tmp
+
+% If a dynamic file creation fails, log the command to this file, in
+% either the current directory or TEXMFOUTPUT.  Set to the
+% empty string or  0  to avoid logging.
+MISSFONT_LOG = missfont.log
+
+% Set to a colon-separated list of words specifying warnings to suppress.
+% To suppress everything, use TEX_HUSH = all; this is currently equivalent to
+% TEX_HUSH = checksum:lostchar:readable:special
+% To suppress nothing, use TEX_HUSH = none or do not set the variable at all.
+TEX_HUSH = none
+
+% Enable system commands via \write18{...}?
+shell_escape = f
+
+% Allow TeX \openin, \openout, or \input on filenames starting with `.'
+% (e.g., .rhosts) or outside the current tree (e.g., /etc/passwd)?
+% a (any)        : any file can be opened.
+% r (restricted) : disallow opening "dotfiles".
+% p (paranoid)   : as 'r' and disallow going to parent directories, and
+%                  restrict absolute paths to be under $TEXMFOUTPUT.
+openout_any = p
+openin_any = a
+
+% Allow TeX, MF, and MP to parse the first line of an input file for
+% the %&format construct.
+parse_first_line = f
+
+% Enable file:line:error style messages.
+file_line_error_style = f
+
+% Enable the mktex... scripts by default?  These must be set to 0 or 1.
+% Particular programs can and do override these settings, for example
+% dvips's -M option.  Your first chance to specify whether the scripts
+% are invoked by default is at configure time.
+% 
+% These values are ignored if the script names are changed; e.g., if you
+% set DVIPSMAKEPK to `foo', what counts is the value of the environment
+% variable/config value `FOO', not the `MKTEXPK' value.
+% 
+% MKTEXTEX = 0
+% MKTEXPK = 0
+% MKTEXMF = 0
+% MKTEXTFM = 0
+% MKTEXFMT = 0
+% MKOCP = 0
+% MKOFM = 0
+
+% What MetaPost runs to make MPX files.  This is passed an option -troff
+% if MP is in troff mode.  Set to `0' to disable this feature.
+MPXCOMMAND = makempx
+
+
+%  Part 3: Array and other sizes for TeX (and Metafont and MetaPost).
+% 
+% If you want to change some of these sizes only for a certain TeX
+% variant, the usual dot notation works, e.g.,
+% main_memory.hugetex = 20000000
+% 
+% If a change here appears to be ignored, try redumping the format file.
+
+% Memory. Must be less than 8,000,000 total.
+% 
+% main_memory is relevant only to initex, extra_mem_* only to non-ini.
+% Thus, have to redump the .fmt file after changing main_memory; to add
+% to existing fmt files, increase extra_mem_*.  (To get an idea of how
+% much, try \tracingstats=2 in your TeX source file;
+% web2c/tests/memtest.tex might also be interesting.)
+% 
+% To increase space for boxes (as might be needed by, e.g., PiCTeX),
+% increase extra_mem_bot.
+% 
+% For some xy-pic samples, you may need as much as 700000 words of memory.
+% For the vast majority of documents, 60000 or less will do.
+% 
+main_memory = 1000000 % words of inimemory available; also applies to inimf&mp
+extra_mem_top = 0     % extra high memory for chars, tokens, etc.
+extra_mem_bot = 0     % extra low memory for boxes, glue, breakpoints, etc.
+
+% ConTeXt is a memory hog...
+extra_mem_top.context = 2000000
+extra_mem_bot.context = 4000000
+main_memory.context = 1500000
+main_memory.mpost = 1500000
+
+% Words of font info for TeX (total size of all TFM files, approximately). 
+font_mem_size = 500000
+
+% Total number of fonts. Must be >= 50 and <= 2000 (without tex.ch changes).
+font_max = 2000
+
+% Extra space for the hash table of control sequences (which allows 10K
+% names as distributed).
+hash_extra = 50000
+
+% Max number of characters in all strings, including all error messages,
+% help texts, font names, control sequences.  These values apply to TeX and MP.
+pool_size = 1250000
+% Minimum pool space after TeX/MP's own strings; must be at least
+% 25000 less than pool_size, but doesn't need to be nearly that large.
+string_vacancies = 90000
+% Maximum number of strings.
+max_strings = 100000
+% min pool space left after loading .fmt
+pool_free = 47500
+
+% Hyphenation trie. As distributed, the maximum is 65535; this should
+% work unless `unsigned short' is not supported or is smaller than 16
+% bits.  This value should suffice for UK English, US English, French,
+% and German (for example).  To increase, you must change
+% `ssup_trie_opcode' and `ssup_trie_size' in tex.ch (and rebuild TeX);
+% the trie will then consume four bytes per entry, instead of two.
+% 
+% US English, German, and Portuguese: 30000.
+% German: 14000.
+% US English: 10000.
+% 
+trie_size = 300000
+
+% Buffer size.  TeX uses the buffer to contain input lines, but macro
+% expansion works by writing material into the buffer and reparsing the
+% line.  As a consequence, certain constructs require the buffer to be
+% very large.  As distributed, the size is 50000; most documents can be
+% handled within a tenth of this size.
+buf_size = 200000
+
+hyph_size = 8191        % prime number of hyphenation exceptions, >610, <32767.
+			% http://primes.utm.edu/curios/page.php/8191.html
+nest_size = 500		% simultaneous semantic levels (e.g., groups)
+max_in_open = 15	% simultaneous input files and error insertions
+param_size = 5000	% simultaneous macro parameters
+save_size = 5000	% for saving values outside current group
+stack_size = 1500	% simultaneous input sources
+
+% These are Omega-specific.
+ocp_buf_size = 20000	% character buffers for ocp filters.
+ocp_stack_size = 10000	% stacks for ocp computations.
+ocp_list_size = 1000	% control for multiple ocps.
+
+% Parameter specific to MetaPost.
+% Maximum number of knots between breakpoints of a path.
+% Set to 2000 by default.
+% path_size.mpost = 10000
+
+% These are pdftex-specific.
+obj_tab_size = 300000    % PDF objects
+dest_names_size = 300000 % destinations
+
+% These work best if they are the same as the I/O buffer size, but it
+% doesn't matter much.  Must be a multiple of 8.
+dvi_buf_size = 16384 % TeX
+gf_buf_size = 16384  % MF
+
+% It's probably inadvisable to change these. At any rate, we must have:
+% 45 < error_line      < 255;
+% 30 < half_error_line < error_line - 15;
+% 60 <= max_print_line;
+% These apply to Metafont and MetaPost as well.
+error_line = 79
+half_error_line = 50
+max_print_line = 79