French translation for tlmgr updated

git-svn-id: svn://tug.org/texlive/trunk@57912 c570f23f-e606-0410-a88d-b1316a301751

1 files changed, 0 insertions, 449 deletions

diff --git a/Build/source/libs/zlib/zlib-src/examples/gzjoin.c b/Build/source/libs/zlib/zlib-src/examples/gzjoin.c
deleted file mode 100644
index 89e8098441b..00000000000
--- a/Build/source/libs/zlib/zlib-src/examples/gzjoin.c
+++ /dev/null
@@ -1,449 +0,0 @@
-/* gzjoin -- command to join gzip files into one gzip file
-
-  Copyright (C) 2004, 2005, 2012 Mark Adler, all rights reserved
-  version 1.2, 14 Aug 2012
-
-  This software is provided 'as-is', without any express or implied
-  warranty.  In no event will the author be held liable for any damages
-  arising from the use of this software.
-
-  Permission is granted to anyone to use this software for any purpose,
-  including commercial applications, and to alter it and redistribute it
-  freely, subject to the following restrictions:
-
-  1. The origin of this software must not be misrepresented; you must not
-     claim that you wrote the original software. If you use this software
-     in a product, an acknowledgment in the product documentation would be
-     appreciated but is not required.
-  2. Altered source versions must be plainly marked as such, and must not be
-     misrepresented as being the original software.
-  3. This notice may not be removed or altered from any source distribution.
-
-  Mark Adler    madler@alumni.caltech.edu
- */
-
-/*
- * Change history:
- *
- * 1.0  11 Dec 2004     - First version
- * 1.1  12 Jun 2005     - Changed ssize_t to long for portability
- * 1.2  14 Aug 2012     - Clean up for z_const usage
- */
-
-/*
-   gzjoin takes one or more gzip files on the command line and writes out a
-   single gzip file that will uncompress to the concatenation of the
-   uncompressed data from the individual gzip files.  gzjoin does this without
-   having to recompress any of the data and without having to calculate a new
-   crc32 for the concatenated uncompressed data.  gzjoin does however have to
-   decompress all of the input data in order to find the bits in the compressed
-   data that need to be modified to concatenate the streams.
-
-   gzjoin does not do an integrity check on the input gzip files other than
-   checking the gzip header and decompressing the compressed data.  They are
-   otherwise assumed to be complete and correct.
-
-   Each joint between gzip files removes at least 18 bytes of previous trailer
-   and subsequent header, and inserts an average of about three bytes to the
-   compressed data in order to connect the streams.  The output gzip file
-   has a minimal ten-byte gzip header with no file name or modification time.
-
-   This program was written to illustrate the use of the Z_BLOCK option of
-   inflate() and the crc32_combine() function.  gzjoin will not compile with
-   versions of zlib earlier than 1.2.3.
- */
-
-#include <stdio.h>      /* fputs(), fprintf(), fwrite(), putc() */
-#include <stdlib.h>     /* exit(), malloc(), free() */
-#include <fcntl.h>      /* open() */
-#include <unistd.h>     /* close(), read(), lseek() */
-#include "zlib.h"
-    /* crc32(), crc32_combine(), inflateInit2(), inflate(), inflateEnd() */
-
-#define local static
-
-/* exit with an error (return a value to allow use in an expression) */
-local int bail(char *why1, char *why2)
-{
-    fprintf(stderr, "gzjoin error: %s%s, output incomplete\n", why1, why2);
-    exit(1);
-    return 0;
-}
-
-/* -- simple buffered file input with access to the buffer -- */
-
-#define CHUNK 32768         /* must be a power of two and fit in unsigned */
-
-/* bin buffered input file type */
-typedef struct {
-    char *name;             /* name of file for error messages */
-    int fd;                 /* file descriptor */
-    unsigned left;          /* bytes remaining at next */
-    unsigned char *next;    /* next byte to read */
-    unsigned char *buf;     /* allocated buffer of length CHUNK */
-} bin;
-
-/* close a buffered file and free allocated memory */
-local void bclose(bin *in)
-{
-    if (in != NULL) {
-        if (in->fd != -1)
-            close(in->fd);
-        if (in->buf != NULL)
-            free(in->buf);
-        free(in);
-    }
-}
-
-/* open a buffered file for input, return a pointer to type bin, or NULL on
-   failure */
-local bin *bopen(char *name)
-{
-    bin *in;
-
-    in = malloc(sizeof(bin));
-    if (in == NULL)
-        return NULL;
-    in->buf = malloc(CHUNK);
-    in->fd = open(name, O_RDONLY, 0);
-    if (in->buf == NULL || in->fd == -1) {
-        bclose(in);
-        return NULL;
-    }
-    in->left = 0;
-    in->next = in->buf;
-    in->name = name;
-    return in;
-}
-
-/* load buffer from file, return -1 on read error, 0 or 1 on success, with
-   1 indicating that end-of-file was reached */
-local int bload(bin *in)
-{
-    long len;
-
-    if (in == NULL)
-        return -1;
-    if (in->left != 0)
-        return 0;
-    in->next = in->buf;
-    do {
-        len = (long)read(in->fd, in->buf + in->left, CHUNK - in->left);
-        if (len < 0)
-            return -1;
-        in->left += (unsigned)len;
-    } while (len != 0 && in->left < CHUNK);
-    return len == 0 ? 1 : 0;
-}
-
-/* get a byte from the file, bail if end of file */
-#define bget(in) (in->left ? 0 : bload(in), \
-                  in->left ? (in->left--, *(in->next)++) : \
-                    bail("unexpected end of file on ", in->name))
-
-/* get a four-byte little-endian unsigned integer from file */
-local unsigned long bget4(bin *in)
-{
-    unsigned long val;
-
-    val = bget(in);
-    val += (unsigned long)(bget(in)) << 8;
-    val += (unsigned long)(bget(in)) << 16;
-    val += (unsigned long)(bget(in)) << 24;
-    return val;
-}
-
-/* skip bytes in file */
-local void bskip(bin *in, unsigned skip)
-{
-    /* check pointer */
-    if (in == NULL)
-        return;
-
-    /* easy case -- skip bytes in buffer */
-    if (skip <= in->left) {
-        in->left -= skip;
-        in->next += skip;
-        return;
-    }
-
-    /* skip what's in buffer, discard buffer contents */
-    skip -= in->left;
-    in->left = 0;
-
-    /* seek past multiples of CHUNK bytes */
-    if (skip > CHUNK) {
-        unsigned left;
-
-        left = skip & (CHUNK - 1);
-        if (left == 0) {
-            /* exact number of chunks: seek all the way minus one byte to check
-               for end-of-file with a read */
-            lseek(in->fd, skip - 1, SEEK_CUR);
-            if (read(in->fd, in->buf, 1) != 1)
-                bail("unexpected end of file on ", in->name);
-            return;
-        }
-
-        /* skip the integral chunks, update skip with remainder */
-        lseek(in->fd, skip - left, SEEK_CUR);
-        skip = left;
-    }
-
-    /* read more input and skip remainder */
-    bload(in);
-    if (skip > in->left)
-        bail("unexpected end of file on ", in->name);
-    in->left -= skip;
-    in->next += skip;
-}
-
-/* -- end of buffered input functions -- */
-
-/* skip the gzip header from file in */
-local void gzhead(bin *in)
-{
-    int flags;
-
-    /* verify gzip magic header and compression method */
-    if (bget(in) != 0x1f || bget(in) != 0x8b || bget(in) != 8)
-        bail(in->name, " is not a valid gzip file");
-
-    /* get and verify flags */
-    flags = bget(in);
-    if ((flags & 0xe0) != 0)
-        bail("unknown reserved bits set in ", in->name);
-
-    /* skip modification time, extra flags, and os */
-    bskip(in, 6);
-
-    /* skip extra field if present */
-    if (flags & 4) {
-        unsigned len;
-
-        len = bget(in);
-        len += (unsigned)(bget(in)) << 8;
-        bskip(in, len);
-    }
-
-    /* skip file name if present */
-    if (flags & 8)
-        while (bget(in) != 0)
-            ;
-
-    /* skip comment if present */
-    if (flags & 16)
-        while (bget(in) != 0)
-            ;
-
-    /* skip header crc if present */
-    if (flags & 2)
-        bskip(in, 2);
-}
-
-/* write a four-byte little-endian unsigned integer to out */
-local void put4(unsigned long val, FILE *out)
-{
-    putc(val & 0xff, out);
-    putc((val >> 8) & 0xff, out);
-    putc((val >> 16) & 0xff, out);
-    putc((val >> 24) & 0xff, out);
-}
-
-/* Load up zlib stream from buffered input, bail if end of file */
-local void zpull(z_streamp strm, bin *in)
-{
-    if (in->left == 0)
-        bload(in);
-    if (in->left == 0)
-        bail("unexpected end of file on ", in->name);
-    strm->avail_in = in->left;
-    strm->next_in = in->next;
-}
-
-/* Write header for gzip file to out and initialize trailer. */
-local void gzinit(unsigned long *crc, unsigned long *tot, FILE *out)
-{
-    fwrite("\x1f\x8b\x08\0\0\0\0\0\0\xff", 1, 10, out);
-    *crc = crc32(0L, Z_NULL, 0);
-    *tot = 0;
-}
-
-/* Copy the compressed data from name, zeroing the last block bit of the last
-   block if clr is true, and adding empty blocks as needed to get to a byte
-   boundary.  If clr is false, then the last block becomes the last block of
-   the output, and the gzip trailer is written.  crc and tot maintains the
-   crc and length (modulo 2^32) of the output for the trailer.  The resulting
-   gzip file is written to out.  gzinit() must be called before the first call
-   of gzcopy() to write the gzip header and to initialize crc and tot. */
-local void gzcopy(char *name, int clr, unsigned long *crc, unsigned long *tot,
-                  FILE *out)
-{
-    int ret;                /* return value from zlib functions */
-    int pos;                /* where the "last block" bit is in byte */
-    int last;               /* true if processing the last block */
-    bin *in;                /* buffered input file */
-    unsigned char *start;   /* start of compressed data in buffer */
-    unsigned char *junk;    /* buffer for uncompressed data -- discarded */
-    z_off_t len;            /* length of uncompressed data (support > 4 GB) */
-    z_stream strm;          /* zlib inflate stream */
-
-    /* open gzip file and skip header */
-    in = bopen(name);
-    if (in == NULL)
-        bail("could not open ", name);
-    gzhead(in);
-
-    /* allocate buffer for uncompressed data and initialize raw inflate
-       stream */
-    junk = malloc(CHUNK);
-    strm.zalloc = Z_NULL;
-    strm.zfree = Z_NULL;
-    strm.opaque = Z_NULL;
-    strm.avail_in = 0;
-    strm.next_in = Z_NULL;
-    ret = inflateInit2(&strm, -15);
-    if (junk == NULL || ret != Z_OK)
-        bail("out of memory", "");
-
-    /* inflate and copy compressed data, clear last-block bit if requested */
-    len = 0;
-    zpull(&strm, in);
-    start = in->next;
-    last = start[0] & 1;
-    if (last && clr)
-        start[0] &= ~1;
-    strm.avail_out = 0;
-    for (;;) {
-        /* if input used and output done, write used input and get more */
-        if (strm.avail_in == 0 && strm.avail_out != 0) {
-            fwrite(start, 1, strm.next_in - start, out);
-            start = in->buf;
-            in->left = 0;
-            zpull(&strm, in);
-        }
-
-        /* decompress -- return early when end-of-block reached */
-        strm.avail_out = CHUNK;
-        strm.next_out = junk;
-        ret = inflate(&strm, Z_BLOCK);
-        switch (ret) {
-        case Z_MEM_ERROR:
-            bail("out of memory", "");
-        case Z_DATA_ERROR:
-            bail("invalid compressed data in ", in->name);
-        }
-
-        /* update length of uncompressed data */
-        len += CHUNK - strm.avail_out;
-
-        /* check for block boundary (only get this when block copied out) */
-        if (strm.data_type & 128) {
-            /* if that was the last block, then done */
-            if (last)
-                break;
-
-            /* number of unused bits in last byte */
-            pos = strm.data_type & 7;
-
-            /* find the next last-block bit */
-            if (pos != 0) {
-                /* next last-block bit is in last used byte */
-                pos = 0x100 >> pos;
-                last = strm.next_in[-1] & pos;
-                if (last && clr)
-                    in->buf[strm.next_in - in->buf - 1] &= ~pos;
-            }
-            else {
-                /* next last-block bit is in next unused byte */
-                if (strm.avail_in == 0) {
-                    /* don't have that byte yet -- get it */
-                    fwrite(start, 1, strm.next_in - start, out);
-                    start = in->buf;
-                    in->left = 0;
-                    zpull(&strm, in);
-                }
-                last = strm.next_in[0] & 1;
-                if (last && clr)
-                    in->buf[strm.next_in - in->buf] &= ~1;
-            }
-        }
-    }
-
-    /* update buffer with unused input */
-    in->left = strm.avail_in;
-    in->next = in->buf + (strm.next_in - in->buf);
-
-    /* copy used input, write empty blocks to get to byte boundary */
-    pos = strm.data_type & 7;
-    fwrite(start, 1, in->next - start - 1, out);
-    last = in->next[-1];
-    if (pos == 0 || !clr)
-        /* already at byte boundary, or last file: write last byte */
-        putc(last, out);
-    else {
-        /* append empty blocks to last byte */
-        last &= ((0x100 >> pos) - 1);       /* assure unused bits are zero */
-        if (pos & 1) {
-            /* odd -- append an empty stored block */
-            putc(last, out);
-            if (pos == 1)
-                putc(0, out);               /* two more bits in block header */
-            fwrite("\0\0\xff\xff", 1, 4, out);
-        }
-        else {
-            /* even -- append 1, 2, or 3 empty fixed blocks */
-            switch (pos) {
-            case 6:
-                putc(last | 8, out);
-                last = 0;
-            case 4:
-                putc(last | 0x20, out);
-                last = 0;
-            case 2:
-                putc(last | 0x80, out);
-                putc(0, out);
-            }
-        }
-    }
-
-    /* update crc and tot */
-    *crc = crc32_combine(*crc, bget4(in), len);
-    *tot += (unsigned long)len;
-
-    /* clean up */
-    inflateEnd(&strm);
-    free(junk);
-    bclose(in);
-
-    /* write trailer if this is the last gzip file */
-    if (!clr) {
-        put4(*crc, out);
-        put4(*tot, out);
-    }
-}
-
-/* join the gzip files on the command line, write result to stdout */
-int main(int argc, char **argv)
-{
-    unsigned long crc, tot;     /* running crc and total uncompressed length */
-
-    /* skip command name */
-    argc--;
-    argv++;
-
-    /* show usage if no arguments */
-    if (argc == 0) {
-        fputs("gzjoin usage: gzjoin f1.gz [f2.gz [f3.gz ...]] > fjoin.gz\n",
-              stderr);
-        return 0;
-    }
-
-    /* join gzip files on command line and write to stdout */
-    gzinit(&crc, &tot, stdout);
-    while (argc--)
-        gzcopy(*argv++, argc, &crc, &tot, stdout);
-
-    /* done */
-    return 0;
-}