libs 1

git-svn-id: svn://tug.org/texlive/trunk@1483 c570f23f-e606-0410-a88d-b1316a301751

1 files changed, 693 insertions, 0 deletions

diff --git a/Build/source/libs/zlib/examples/gun.c b/Build/source/libs/zlib/examples/gun.c
new file mode 100644
index 00000000000..bfec590a002
--- /dev/null
+++ b/Build/source/libs/zlib/examples/gun.c
@@ -0,0 +1,693 @@
+/* gun.c -- simple gunzip to give an example of the use of inflateBack()
+ * Copyright (C) 2003, 2005 Mark Adler
+ * For conditions of distribution and use, see copyright notice in zlib.h
+   Version 1.3  12 June 2005  Mark Adler */
+
+/* Version history:
+   1.0  16 Feb 2003  First version for testing of inflateBack()
+   1.1  21 Feb 2005  Decompress concatenated gzip streams
+                     Remove use of "this" variable (C++ keyword)
+                     Fix return value for in()
+                     Improve allocation failure checking
+                     Add typecasting for void * structures
+                     Add -h option for command version and usage
+                     Add a bunch of comments
+   1.2  20 Mar 2005  Add Unix compress (LZW) decompression
+                     Copy file attributes from input file to output file
+   1.3  12 Jun 2005  Add casts for error messages [Oberhumer]
+ */
+
+/*
+   gun [ -t ] [ name ... ]
+
+   decompresses the data in the named gzip files.  If no arguments are given,
+   gun will decompress from stdin to stdout.  The names must end in .gz, -gz,
+   .z, -z, _z, or .Z.  The uncompressed data will be written to a file name
+   with the suffix stripped.  On success, the original file is deleted.  On
+   failure, the output file is deleted.  For most failures, the command will
+   continue to process the remaining names on the command line.  A memory
+   allocation failure will abort the command.  If -t is specified, then the
+   listed files or stdin will be tested as gzip files for integrity (without
+   checking for a proper suffix), no output will be written, and no files
+   will be deleted.
+
+   Like gzip, gun allows concatenated gzip streams and will decompress them,
+   writing all of the uncompressed data to the output.  Unlike gzip, gun allows
+   an empty file on input, and will produce no error writing an empty output
+   file.
+
+   gun will also decompress files made by Unix compress, which uses LZW
+   compression.  These files are automatically detected by virtue of their
+   magic header bytes.  Since the end of Unix compress stream is marked by the
+   end-of-file, they cannot be concantenated.  If a Unix compress stream is
+   encountered in an input file, it is the last stream in that file.
+
+   Like gunzip and uncompress, the file attributes of the orignal compressed
+   file are maintained in the final uncompressed file, to the extent that the
+   user permissions allow it.
+
+   On my Mac OS X PowerPC G4, gun is almost twice as fast as gunzip (version
+   1.2.4) is on the same file, when gun is linked with zlib 1.2.2.  Also the
+   LZW decompression provided by gun is about twice as fast as the standard
+   Unix uncompress command.
+ */
+
+/* external functions and related types and constants */
+#include <stdio.h>          /* fprintf() */
+#include <stdlib.h>         /* malloc(), free() */
+#include <string.h>         /* strerror(), strcmp(), strlen(), memcpy() */
+#include <errno.h>          /* errno */
+#include <fcntl.h>          /* open() */
+#include <unistd.h>         /* read(), write(), close(), chown(), unlink() */
+#include <sys/types.h>
+#include <sys/stat.h>       /* stat(), chmod() */
+#include <utime.h>          /* utime() */
+#include "zlib.h"           /* inflateBackInit(), inflateBack(), */
+                            /* inflateBackEnd(), crc32() */
+
+/* function declaration */
+#define local static
+
+/* buffer constants */
+#define SIZE 32768U         /* input and output buffer sizes */
+#define PIECE 16384         /* limits i/o chunks for 16-bit int case */
+
+/* structure for infback() to pass to input function in() -- it maintains the
+   input file and a buffer of size SIZE */
+struct ind {
+    int infile;
+    unsigned char *inbuf;
+};
+
+/* Load input buffer, assumed to be empty, and return bytes loaded and a
+   pointer to them.  read() is called until the buffer is full, or until it
+   returns end-of-file or error.  Return 0 on error. */
+local unsigned in(void *in_desc, unsigned char **buf)
+{
+    int ret;
+    unsigned len;
+    unsigned char *next;
+    struct ind *me = (struct ind *)in_desc;
+
+    next = me->inbuf;
+    *buf = next;
+    len = 0;
+    do {
+        ret = PIECE;
+        if ((unsigned)ret > SIZE - len)
+            ret = (int)(SIZE - len);
+        ret = (int)read(me->infile, next, ret);
+        if (ret == -1) {
+            len = 0;
+            break;
+        }
+        next += ret;
+        len += ret;
+    } while (ret != 0 && len < SIZE);
+    return len;
+}
+
+/* structure for infback() to pass to output function out() -- it maintains the
+   output file, a running CRC-32 check on the output and the total number of
+   bytes output, both for checking against the gzip trailer.  (The length in
+   the gzip trailer is stored modulo 2^32, so it's ok if a long is 32 bits and
+   the output is greater than 4 GB.) */
+struct outd {
+    int outfile;
+    int check;                  /* true if checking crc and total */
+    unsigned long crc;
+    unsigned long total;
+};
+
+/* Write output buffer and update the CRC-32 and total bytes written.  write()
+   is called until all of the output is written or an error is encountered.
+   On success out() returns 0.  For a write failure, out() returns 1.  If the
+   output file descriptor is -1, then nothing is written.
+ */
+local int out(void *out_desc, unsigned char *buf, unsigned len)
+{
+    int ret;
+    struct outd *me = (struct outd *)out_desc;
+
+    if (me->check) {
+        me->crc = crc32(me->crc, buf, len);
+        me->total += len;
+    }
+    if (me->outfile != -1)
+        do {
+            ret = PIECE;
+            if ((unsigned)ret > len)
+                ret = (int)len;
+            ret = (int)write(me->outfile, buf, ret);
+            if (ret == -1)
+                return 1;
+            buf += ret;
+            len -= ret;
+        } while (len != 0);
+    return 0;
+}
+
+/* next input byte macro for use inside lunpipe() and gunpipe() */
+#define NEXT() (have ? 0 : (have = in(indp, &next)), \
+                last = have ? (have--, (int)(*next++)) : -1)
+
+/* memory for gunpipe() and lunpipe() --
+   the first 256 entries of prefix[] and suffix[] are never used, could
+   have offset the index, but it's faster to waste the memory */
+unsigned char inbuf[SIZE];              /* input buffer */
+unsigned char outbuf[SIZE];             /* output buffer */
+unsigned short prefix[65536];           /* index to LZW prefix string */
+unsigned char suffix[65536];            /* one-character LZW suffix */
+unsigned char match[65280 + 2];         /* buffer for reversed match or gzip
+                                           32K sliding window */
+
+/* throw out what's left in the current bits byte buffer (this is a vestigial
+   aspect of the compressed data format derived from an implementation that
+   made use of a special VAX machine instruction!) */
+#define FLUSHCODE() \
+    do { \
+        left = 0; \
+        rem = 0; \
+        if (chunk > have) { \
+            chunk -= have; \
+            have = 0; \
+            if (NEXT() == -1) \
+                break; \
+            chunk--; \
+            if (chunk > have) { \
+                chunk = have = 0; \
+                break; \
+            } \
+        } \
+        have -= chunk; \
+        next += chunk; \
+        chunk = 0; \
+    } while (0)
+
+/* Decompress a compress (LZW) file from indp to outfile.  The compress magic
+   header (two bytes) has already been read and verified.  There are have bytes
+   of buffered input at next.  strm is used for passing error information back
+   to gunpipe().
+
+   lunpipe() will return Z_OK on success, Z_BUF_ERROR for an unexpected end of
+   file, read error, or write error (a write error indicated by strm->next_in
+   not equal to Z_NULL), or Z_DATA_ERROR for invalid input.
+ */
+local int lunpipe(unsigned have, unsigned char *next, struct ind *indp,
+                  int outfile, z_stream *strm)
+{
+    int last;                   /* last byte read by NEXT(), or -1 if EOF */
+    int chunk;                  /* bytes left in current chunk */
+    int left;                   /* bits left in rem */
+    unsigned rem;               /* unused bits from input */
+    int bits;                   /* current bits per code */
+    unsigned code;              /* code, table traversal index */
+    unsigned mask;              /* mask for current bits codes */
+    int max;                    /* maximum bits per code for this stream */
+    int flags;                  /* compress flags, then block compress flag */
+    unsigned end;               /* last valid entry in prefix/suffix tables */
+    unsigned temp;              /* current code */
+    unsigned prev;              /* previous code */
+    unsigned final;             /* last character written for previous code */
+    unsigned stack;             /* next position for reversed string */
+    unsigned outcnt;            /* bytes in output buffer */
+    struct outd outd;           /* output structure */
+
+    /* set up output */
+    outd.outfile = outfile;
+    outd.check = 0;
+
+    /* process remainder of compress header -- a flags byte */
+    flags = NEXT();
+    if (last == -1)
+        return Z_BUF_ERROR;
+    if (flags & 0x60) {
+        strm->msg = (char *)"unknown lzw flags set";
+        return Z_DATA_ERROR;
+    }
+    max = flags & 0x1f;
+    if (max < 9 || max > 16) {
+        strm->msg = (char *)"lzw bits out of range";
+        return Z_DATA_ERROR;
+    }
+    if (max == 9)                           /* 9 doesn't really mean 9 */
+        max = 10;
+    flags &= 0x80;                          /* true if block compress */
+
+    /* clear table */
+    bits = 9;
+    mask = 0x1ff;
+    end = flags ? 256 : 255;
+
+    /* set up: get first 9-bit code, which is the first decompressed byte, but
+       don't create a table entry until the next code */
+    if (NEXT() == -1)                       /* no compressed data is ok */
+        return Z_OK;
+    final = prev = (unsigned)last;          /* low 8 bits of code */
+    if (NEXT() == -1)                       /* missing a bit */
+        return Z_BUF_ERROR;
+    if (last & 1) {                         /* code must be < 256 */
+        strm->msg = (char *)"invalid lzw code";
+        return Z_DATA_ERROR;
+    }
+    rem = (unsigned)last >> 1;              /* remaining 7 bits */
+    left = 7;
+    chunk = bits - 2;                       /* 7 bytes left in this chunk */
+    outbuf[0] = (unsigned char)final;       /* write first decompressed byte */
+    outcnt = 1;
+
+    /* decode codes */
+    stack = 0;
+    for (;;) {
+        /* if the table will be full after this, increment the code size */
+        if (end >= mask && bits < max) {
+            FLUSHCODE();
+            bits++;
+            mask <<= 1;
+            mask++;
+        }
+
+        /* get a code of length bits */
+        if (chunk == 0)                     /* decrement chunk modulo bits */
+            chunk = bits;
+        code = rem;                         /* low bits of code */
+        if (NEXT() == -1) {                 /* EOF is end of compressed data */
+            /* write remaining buffered output */
+            if (outcnt && out(&outd, outbuf, outcnt)) {
+                strm->next_in = outbuf;     /* signal write error */
+                return Z_BUF_ERROR;
+            }
+            return Z_OK;
+        }
+        code += (unsigned)last << left;     /* middle (or high) bits of code */
+        left += 8;
+        chunk--;
+        if (bits > left) {                  /* need more bits */
+            if (NEXT() == -1)               /* can't end in middle of code */
+                return Z_BUF_ERROR;
+            code += (unsigned)last << left; /* high bits of code */
+            left += 8;
+            chunk--;
+        }
+        code &= mask;                       /* mask to current code length */
+        left -= bits;                       /* number of unused bits */
+        rem = (unsigned)last >> (8 - left); /* unused bits from last byte */
+
+        /* process clear code (256) */
+        if (code == 256 && flags) {
+            FLUSHCODE();
+            bits = 9;                       /* initialize bits and mask */
+            mask = 0x1ff;
+            end = 255;                      /* empty table */
+            continue;                       /* get next code */
+        }
+
+        /* special code to reuse last match */
+        temp = code;                        /* save the current code */
+        if (code > end) {
+            /* Be picky on the allowed code here, and make sure that the code
+               we drop through (prev) will be a valid index so that random
+               input does not cause an exception.  The code != end + 1 check is
+               empirically derived, and not checked in the original uncompress
+               code.  If this ever causes a problem, that check could be safely
+               removed.  Leaving this check in greatly improves gun's ability
+               to detect random or corrupted input after a compress header.
+               In any case, the prev > end check must be retained. */
+            if (code != end + 1 || prev > end) {
+                strm->msg = (char *)"invalid lzw code";
+                return Z_DATA_ERROR;
+            }
+            match[stack++] = (unsigned char)final;
+            code = prev;
+        }
+
+        /* walk through linked list to generate output in reverse order */
+        while (code >= 256) {
+            match[stack++] = suffix[code];
+            code = prefix[code];
+        }
+        match[stack++] = (unsigned char)code;
+        final = code;
+
+        /* link new table entry */
+        if (end < mask) {
+            end++;
+            prefix[end] = (unsigned short)prev;
+            suffix[end] = (unsigned char)final;
+        }
+
+        /* set previous code for next iteration */
+        prev = temp;
+
+        /* write output in forward order */
+        while (stack > SIZE - outcnt) {
+            while (outcnt < SIZE)
+                outbuf[outcnt++] = match[--stack];
+            if (out(&outd, outbuf, outcnt)) {
+                strm->next_in = outbuf; /* signal write error */
+                return Z_BUF_ERROR;
+            }
+            outcnt = 0;
+        }
+        do {
+            outbuf[outcnt++] = match[--stack];
+        } while (stack);
+
+        /* loop for next code with final and prev as the last match, rem and
+           left provide the first 0..7 bits of the next code, end is the last
+           valid table entry */
+    }
+}
+
+/* Decompress a gzip file from infile to outfile.  strm is assumed to have been
+   successfully initialized with inflateBackInit().  The input file may consist
+   of a series of gzip streams, in which case all of them will be decompressed
+   to the output file.  If outfile is -1, then the gzip stream(s) integrity is
+   checked and nothing is written.
+
+   The return value is a zlib error code: Z_MEM_ERROR if out of memory,
+   Z_DATA_ERROR if the header or the compressed data is invalid, or if the
+   trailer CRC-32 check or length doesn't match, Z_BUF_ERROR if the input ends
+   prematurely or a write error occurs, or Z_ERRNO if junk (not a another gzip
+   stream) follows a valid gzip stream.
+ */
+local int gunpipe(z_stream *strm, int infile, int outfile)
+{
+    int ret, first, last;
+    unsigned have, flags, len;
+    unsigned char *next;
+    struct ind ind, *indp;
+    struct outd outd;
+
+    /* setup input buffer */
+    ind.infile = infile;
+    ind.inbuf = inbuf;
+    indp = &ind;
+
+    /* decompress concatenated gzip streams */
+    have = 0;                               /* no input data read in yet */
+    first = 1;                              /* looking for first gzip header */
+    strm->next_in = Z_NULL;                 /* so Z_BUF_ERROR means EOF */
+    for (;;) {
+        /* look for the two magic header bytes for a gzip stream */
+        if (NEXT() == -1) {
+            ret = Z_OK;
+            break;                          /* empty gzip stream is ok */
+        }
+        if (last != 31 || (NEXT() != 139 && last != 157)) {
+            strm->msg = (char *)"incorrect header check";
+            ret = first ? Z_DATA_ERROR : Z_ERRNO;
+            break;                          /* not a gzip or compress header */
+        }
+        first = 0;                          /* next non-header is junk */
+
+        /* process a compress (LZW) file -- can't be concatenated after this */
+        if (last == 157) {
+            ret = lunpipe(have, next, indp, outfile, strm);
+            break;
+        }
+
+        /* process remainder of gzip header */
+        ret = Z_BUF_ERROR;
+        if (NEXT() != 8) {                  /* only deflate method allowed */
+            if (last == -1) break;
+            strm->msg = (char *)"unknown compression method";
+            ret = Z_DATA_ERROR;
+            break;
+        }
+        flags = NEXT();                     /* header flags */
+        NEXT();                             /* discard mod time, xflgs, os */
+        NEXT();
+        NEXT();
+        NEXT();
+        NEXT();
+        NEXT();
+        if (last == -1) break;
+        if (flags & 0xe0) {
+            strm->msg = (char *)"unknown header flags set";
+            ret = Z_DATA_ERROR;
+            break;
+        }
+        if (flags & 4) {                    /* extra field */
+            len = NEXT();
+            len += (unsigned)(NEXT()) << 8;
+            if (last == -1) break;
+            while (len > have) {
+                len -= have;
+                have = 0;
+                if (NEXT() == -1) break;
+                len--;
+            }
+            if (last == -1) break;
+            have -= len;
+            next += len;
+        }
+        if (flags & 8)                      /* file name */
+            while (NEXT() != 0 && last != -1)
+                ;
+        if (flags & 16)                     /* comment */
+            while (NEXT() != 0 && last != -1)
+                ;
+        if (flags & 2) {                    /* header crc */
+            NEXT();
+            NEXT();
+        }
+        if (last == -1) break;
+
+        /* set up output */
+        outd.outfile = outfile;
+        outd.check = 1;
+        outd.crc = crc32(0L, Z_NULL, 0);
+        outd.total = 0;
+
+        /* decompress data to output */
+        strm->next_in = next;
+        strm->avail_in = have;
+        ret = inflateBack(strm, in, indp, out, &outd);
+        if (ret != Z_STREAM_END) break;
+        next = strm->next_in;
+        have = strm->avail_in;
+        strm->next_in = Z_NULL;             /* so Z_BUF_ERROR means EOF */
+
+        /* check trailer */
+        ret = Z_BUF_ERROR;
+        if (NEXT() != (outd.crc & 0xff) ||
+            NEXT() != ((outd.crc >> 8) & 0xff) ||
+            NEXT() != ((outd.crc >> 16) & 0xff) ||
+            NEXT() != ((outd.crc >> 24) & 0xff)) {
+            /* crc error */
+            if (last != -1) {
+                strm->msg = (char *)"incorrect data check";
+                ret = Z_DATA_ERROR;
+            }
+            break;
+        }
+        if (NEXT() != (outd.total & 0xff) ||
+            NEXT() != ((outd.total >> 8) & 0xff) ||
+            NEXT() != ((outd.total >> 16) & 0xff) ||
+            NEXT() != ((outd.total >> 24) & 0xff)) {
+            /* length error */
+            if (last != -1) {
+                strm->msg = (char *)"incorrect length check";
+                ret = Z_DATA_ERROR;
+            }
+            break;
+        }
+
+        /* go back and look for another gzip stream */
+    }
+
+    /* clean up and return */
+    return ret;
+}
+
+/* Copy file attributes, from -> to, as best we can.  This is best effort, so
+   no errors are reported.  The mode bits, including suid, sgid, and the sticky
+   bit are copied (if allowed), the owner's user id and group id are copied
+   (again if allowed), and the access and modify times are copied. */
+local void copymeta(char *from, char *to)
+{
+    struct stat was;
+    struct utimbuf when;
+
+    /* get all of from's Unix meta data, return if not a regular file */
+    if (stat(from, &was) != 0 || (was.st_mode & S_IFMT) != S_IFREG)
+        return;
+
+    /* set to's mode bits, ignore errors */
+    (void)chmod(to, was.st_mode & 07777);
+
+    /* copy owner's user and group, ignore errors */
+    (void)chown(to, was.st_uid, was.st_gid);
+
+    /* copy access and modify times, ignore errors */
+    when.actime = was.st_atime;
+    when.modtime = was.st_mtime;
+    (void)utime(to, &when);
+}
+
+/* Decompress the file inname to the file outnname, of if test is true, just
+   decompress without writing and check the gzip trailer for integrity.  If
+   inname is NULL or an empty string, read from stdin.  If outname is NULL or
+   an empty string, write to stdout.  strm is a pre-initialized inflateBack
+   structure.  When appropriate, copy the file attributes from inname to
+   outname.
+
+   gunzip() returns 1 if there is an out-of-memory error or an unexpected
+   return code from gunpipe().  Otherwise it returns 0.
+ */
+local int gunzip(z_stream *strm, char *inname, char *outname, int test)
+{
+    int ret;
+    int infile, outfile;
+
+    /* open files */
+    if (inname == NULL || *inname == 0) {
+        inname = "-";
+        infile = 0;     /* stdin */
+    }
+    else {
+        infile = open(inname, O_RDONLY, 0);
+        if (infile == -1) {
+            fprintf(stderr, "gun cannot open %s\n", inname);
+            return 0;
+        }
+    }
+    if (test)
+        outfile = -1;
+    else if (outname == NULL || *outname == 0) {
+        outname = "-";
+        outfile = 1;    /* stdout */
+    }
+    else {
+        outfile = open(outname, O_CREAT | O_TRUNC | O_WRONLY, 0666);
+        if (outfile == -1) {
+            close(infile);
+            fprintf(stderr, "gun cannot create %s\n", outname);
+            return 0;
+        }
+    }
+    errno = 0;
+
+    /* decompress */
+    ret = gunpipe(strm, infile, outfile);
+    if (outfile > 2) close(outfile);
+    if (infile > 2) close(infile);
+
+    /* interpret result */
+    switch (ret) {
+    case Z_OK:
+    case Z_ERRNO:
+        if (infile > 2 && outfile > 2) {
+            copymeta(inname, outname);          /* copy attributes */
+            unlink(inname);
+        }
+        if (ret == Z_ERRNO)
+            fprintf(stderr, "gun warning: trailing garbage ignored in %s\n",
+                    inname);
+        break;
+    case Z_DATA_ERROR:
+        if (outfile > 2) unlink(outname);
+        fprintf(stderr, "gun data error on %s: %s\n", inname, strm->msg);
+        break;
+    case Z_MEM_ERROR:
+        if (outfile > 2) unlink(outname);
+        fprintf(stderr, "gun out of memory error--aborting\n");
+        return 1;
+    case Z_BUF_ERROR:
+        if (outfile > 2) unlink(outname);
+        if (strm->next_in != Z_NULL) {
+            fprintf(stderr, "gun write error on %s: %s\n",
+                    outname, strerror(errno));
+        }
+        else if (errno) {
+            fprintf(stderr, "gun read error on %s: %s\n",
+                    inname, strerror(errno));
+        }
+        else {
+            fprintf(stderr, "gun unexpected end of file on %s\n",
+                    inname);
+        }
+        break;
+    default:
+        if (outfile > 2) unlink(outname);
+        fprintf(stderr, "gun internal error--aborting\n");
+        return 1;
+    }
+    return 0;
+}
+
+/* Process the gun command line arguments.  See the command syntax near the
+   beginning of this source file. */
+int main(int argc, char **argv)
+{
+    int ret, len, test;
+    char *outname;
+    unsigned char *window;
+    z_stream strm;
+
+    /* initialize inflateBack state for repeated use */
+    window = match;                         /* reuse LZW match buffer */
+    strm.zalloc = Z_NULL;
+    strm.zfree = Z_NULL;
+    strm.opaque = Z_NULL;
+    ret = inflateBackInit(&strm, 15, window);
+    if (ret != Z_OK) {
+        fprintf(stderr, "gun out of memory error--aborting\n");
+        return 1;
+    }
+
+    /* decompress each file to the same name with the suffix removed */
+    argc--;
+    argv++;
+    test = 0;
+    if (argc && strcmp(*argv, "-h") == 0) {
+        fprintf(stderr, "gun 1.3 (12 Jun 2005)\n");
+        fprintf(stderr, "Copyright (c) 2005 Mark Adler\n");
+        fprintf(stderr, "usage: gun [-t] [file1.gz [file2.Z ...]]\n");
+        return 0;
+    }
+    if (argc && strcmp(*argv, "-t") == 0) {
+        test = 1;
+        argc--;
+        argv++;
+    }
+    if (argc)
+        do {
+            if (test)
+                outname = NULL;
+            else {
+                len = (int)strlen(*argv);
+                if (strcmp(*argv + len - 3, ".gz") == 0 ||
+                    strcmp(*argv + len - 3, "-gz") == 0)
+                    len -= 3;
+                else if (strcmp(*argv + len - 2, ".z") == 0 ||
+                    strcmp(*argv + len - 2, "-z") == 0 ||
+                    strcmp(*argv + len - 2, "_z") == 0 ||
+                    strcmp(*argv + len - 2, ".Z") == 0)
+                    len -= 2;
+                else {
+                    fprintf(stderr, "gun error: no gz type on %s--skipping\n",
+                            *argv);
+                    continue;
+                }
+                outname = malloc(len + 1);
+                if (outname == NULL) {
+                    fprintf(stderr, "gun out of memory error--aborting\n");
+                    ret = 1;
+                    break;
+                }
+                memcpy(outname, *argv, len);
+                outname[len] = 0;
+            }
+            ret = gunzip(&strm, *argv, outname, test);
+            if (outname != NULL) free(outname);
+            if (ret) break;
+        } while (argv++, --argc);
+    else
+        ret = gunzip(&strm, NULL, NULL, test);
+
+    /* clean up */
+    inflateBackEnd(&strm);
+    return ret;
+}