automake 1.12

git-svn-id: svn://tug.org/texlive/trunk@26146 c570f23f-e606-0410-a88d-b1316a301751

1 files changed, 70 insertions, 42 deletions

diff --git a/Build/source/libs/teckit/Makefile.in b/Build/source/libs/teckit/Makefile.in
index 9e7a7992368..378246377d4 100644
--- a/Build/source/libs/teckit/Makefile.in
+++ b/Build/source/libs/teckit/Makefile.in
@@ -1,4 +1,4 @@
-# Makefile.in generated by automake 1.11.5 from Makefile.am.
+# Makefile.in generated by automake 1.12 from Makefile.am.
 # @configure_input@
 
 # Copyright (C) 1994, 1995, 1996, 1997, 1998, 1999, 2000, 2001, 2002,
@@ -54,18 +54,17 @@ build_triplet = @build@
 host_triplet = @host@
 bin_PROGRAMS = teckit_compile$(EXEEXT)
 subdir = .
-DIST_COMMON = $(am__configure_deps) \
-	$(srcdir)/../../build-aux/config.guess \
-	$(srcdir)/../../build-aux/config.sub \
-	$(srcdir)/../../build-aux/depcomp \
-	$(srcdir)/../../build-aux/install-sh \
-	$(srcdir)/../../build-aux/missing $(srcdir)/Makefile.am \
+DIST_COMMON = $(am__configure_deps) $(srcdir)/Makefile.am \
 	$(srcdir)/Makefile.in $(srcdir)/config.h.in \
-	$(top_srcdir)/configure ../../build-aux/config.guess \
-	../../build-aux/config.sub ../../build-aux/depcomp \
-	../../build-aux/install-sh ../../build-aux/ltmain.sh \
-	../../build-aux/missing ../../build-aux/texinfo.tex \
-	../../build-aux/ylwrap ChangeLog
+	$(top_srcdir)/../../build-aux/config.guess \
+	$(top_srcdir)/../../build-aux/config.sub \
+	$(top_srcdir)/../../build-aux/depcomp \
+	$(top_srcdir)/../../build-aux/install-sh \
+	$(top_srcdir)/../../build-aux/missing $(top_srcdir)/configure \
+	../../build-aux/config.guess ../../build-aux/config.sub \
+	../../build-aux/depcomp ../../build-aux/install-sh \
+	../../build-aux/ltmain.sh ../../build-aux/missing \
+	../../build-aux/texinfo.tex ../../build-aux/ylwrap ChangeLog
 ACLOCAL_M4 = $(top_srcdir)/aclocal.m4
 am__aclocal_m4_deps = $(top_srcdir)/../../m4/kpse-common.m4 \
 	$(top_srcdir)/../../m4/kpse-cxx-hack.m4 \
@@ -127,11 +126,14 @@ RECURSIVE_CLEAN_TARGETS = mostlyclean-recursive clean-recursive	\
   distclean-recursive maintainer-clean-recursive
 AM_RECURSIVE_TARGETS = $(RECURSIVE_TARGETS:-recursive=) \
 	$(RECURSIVE_CLEAN_TARGETS:-recursive=) tags TAGS ctags CTAGS \
-	distdir dist dist-all distcheck
+	cscope distdir dist dist-all distcheck
 ETAGS = etags
 CTAGS = ctags
-am__tty_colors = \
-red=; grn=; lgn=; blu=; std=
+CSCOPE = cscope
+am__tty_colors_dummy = \
+  mgn= red= grn= lgn= blu= brg= std=; \
+  am__color_tests=no
+am__tty_colors = $(am__tty_colors_dummy)
 DIST_SUBDIRS = $(SUBDIRS)
 DISTFILES = $(DIST_COMMON) $(DIST_SOURCES) $(TEXINFOS) $(EXTRA_DIST)
 distdir = $(PACKAGE)-$(VERSION)
@@ -142,6 +144,7 @@ am__remove_distdir = \
       && rm -rf "$(distdir)" \
       || { sleep 5 && rm -rf "$(distdir)"; }; \
   else :; fi
+am__post_remove_distdir = $(am__remove_distdir)
 am__relativize = \
   dir0=`pwd`; \
   sed_first='s,^\([^/]*\)/.*$$,\1,'; \
@@ -169,6 +172,7 @@ am__relativize = \
   reldir="$$dir2"
 DIST_ARCHIVES = $(distdir).tar.gz
 GZIP_ENV = --best
+DIST_TARGETS = dist-gzip
 distuninstallcheck_listfiles = find . -type f -print
 am__distuninstallcheck_listfiles = $(distuninstallcheck_listfiles) \
   | sed 's|^\./|$(prefix)/|' | grep -v '$(infodir)/dir$$'
@@ -502,11 +506,11 @@ TECkit_Compile.obj: $(TECKIT_TREE)/source/Sample-tools/TECkit_Compile.cpp
 @am__fastdepCXX_FALSE@	$(CXX) $(DEFS) $(DEFAULT_INCLUDES) $(INCLUDES) $(AM_CPPFLAGS) $(CPPFLAGS) $(AM_CXXFLAGS) $(CXXFLAGS) -c -o TECkit_Compile.obj `if test -f '$(TECKIT_TREE)/source/Sample-tools/TECkit_Compile.cpp'; then $(CYGPATH_W) '$(TECKIT_TREE)/source/Sample-tools/TECkit_Compile.cpp'; else $(CYGPATH_W) '$(srcdir)/$(TECKIT_TREE)/source/Sample-tools/TECkit_Compile.cpp'; fi`
 
 # This directory's subdirectories are mostly independent; you can cd
-# into them and run `make' without going through this Makefile.
-# To change the values of `make' variables: instead of editing Makefiles,
-# (1) if the variable is set in `config.status', edit `config.status'
-#     (which will cause the Makefiles to be regenerated when you run `make');
-# (2) otherwise, pass the desired values on the `make' command line.
+# into them and run 'make' without going through this Makefile.
+# To change the values of 'make' variables: instead of editing Makefiles,
+# (1) if the variable is set in 'config.status', edit 'config.status'
+#     (which will cause the Makefiles to be regenerated when you run 'make');
+# (2) otherwise, pass the desired values on the 'make' command line.
 $(RECURSIVE_TARGETS):
 	@fail= failcom='exit 1'; \
 	for f in x $$MAKEFLAGS; do \
@@ -570,6 +574,10 @@ ctags-recursive:
 	list='$(SUBDIRS)'; for subdir in $$list; do \
 	  test "$$subdir" = . || ($(am__cd) $$subdir && $(MAKE) $(AM_MAKEFLAGS) ctags); \
 	done
+cscopelist-recursive:
+	list='$(SUBDIRS)'; for subdir in $$list; do \
+	  test "$$subdir" = . || ($(am__cd) $$subdir && $(MAKE) $(AM_MAKEFLAGS) cscopelist); \
+	done
 
 ID: $(HEADERS) $(SOURCES) $(LISP) $(TAGS_FILES)
 	list='$(SOURCES) $(HEADERS) $(LISP) $(TAGS_FILES)'; \
@@ -633,8 +641,32 @@ GTAGS:
 	  && $(am__cd) $(top_srcdir) \
 	  && gtags -i $(GTAGS_ARGS) "$$here"
 
+cscope: cscope.files
+	test ! -s cscope.files \
+	  || $(CSCOPE) -b -q $(AM_CSCOPEFLAGS) $(CSCOPEFLAGS) -i cscope.files $(CSCOPE_ARGS)
+
+clean-cscope:
+	-rm -f cscope.files
+
+cscope.files: clean-cscope cscopelist-recursive cscopelist
+
+cscopelist: cscopelist-recursive $(HEADERS) $(SOURCES) $(LISP)
+	list='$(SOURCES) $(HEADERS) $(LISP)'; \
+	case "$(srcdir)" in \
+	  [\\/]* | ?:[\\/]*) sdir="$(srcdir)" ;; \
+	  *) sdir=$(subdir)/$(srcdir) ;; \
+	esac; \
+	for i in $$list; do \
+	  if test -f "$$i"; then \
+	    echo "$(subdir)/$$i"; \
+	  else \
+	    echo "$$sdir/$$i"; \
+	  fi; \
+	done >> $(top_builddir)/cscope.files
+
 distclean-tags:
 	-rm -f TAGS ID GTAGS GRTAGS GSYMS GPATH tags
+	-rm -f cscope.out cscope.in.out cscope.po.out cscope.files
 
 check-TESTS: $(TESTS)
 	@failed=0; all=0; xfail=0; xpass=0; skip=0; \
@@ -646,7 +678,7 @@ check-TESTS: $(TESTS)
 	    if test -f ./$$tst; then dir=./; \
 	    elif test -f $$tst; then dir=; \
 	    else dir="$(srcdir)/"; fi; \
-	    if $(TESTS_ENVIRONMENT) $${dir}$$tst; then \
+	    if $(TESTS_ENVIRONMENT) $${dir}$$tst $(AM_TESTS_FD_REDIRECT); then \
 	      all=`expr $$all + 1`; \
 	      case " $(XFAIL_TESTS) " in \
 	      *[\ \	]$$tst[\ \	]*) \
@@ -798,40 +830,36 @@ distdir: $(DISTFILES)
 	|| chmod -R a+r "$(distdir)"
 dist-gzip: distdir
 	tardir=$(distdir) && $(am__tar) | GZIP=$(GZIP_ENV) gzip -c >$(distdir).tar.gz
-	$(am__remove_distdir)
+	$(am__post_remove_distdir)
 
 dist-bzip2: distdir
 	tardir=$(distdir) && $(am__tar) | BZIP2=$${BZIP2--9} bzip2 -c >$(distdir).tar.bz2
-	$(am__remove_distdir)
+	$(am__post_remove_distdir)
 
 dist-lzip: distdir
 	tardir=$(distdir) && $(am__tar) | lzip -c $${LZIP_OPT--9} >$(distdir).tar.lz
-	$(am__remove_distdir)
-
-dist-lzma: distdir
-	tardir=$(distdir) && $(am__tar) | lzma -9 -c >$(distdir).tar.lzma
-	$(am__remove_distdir)
+	$(am__post_remove_distdir)
 
 dist-xz: distdir
 	tardir=$(distdir) && $(am__tar) | XZ_OPT=$${XZ_OPT--e} xz -c >$(distdir).tar.xz
-	$(am__remove_distdir)
+	$(am__post_remove_distdir)
 
 dist-tarZ: distdir
 	tardir=$(distdir) && $(am__tar) | compress -c >$(distdir).tar.Z
-	$(am__remove_distdir)
+	$(am__post_remove_distdir)
 
 dist-shar: distdir
 	shar $(distdir) | GZIP=$(GZIP_ENV) gzip -c >$(distdir).shar.gz
-	$(am__remove_distdir)
+	$(am__post_remove_distdir)
 
 dist-zip: distdir
 	-rm -f $(distdir).zip
 	zip -rq $(distdir).zip $(distdir)
-	$(am__remove_distdir)
+	$(am__post_remove_distdir)
 
-dist dist-all: distdir
-	tardir=$(distdir) && $(am__tar) | GZIP=$(GZIP_ENV) gzip -c >$(distdir).tar.gz
-	$(am__remove_distdir)
+dist dist-all:
+	$(MAKE) $(AM_MAKEFLAGS) $(DIST_TARGETS) am__post_remove_distdir='@:'
+	$(am__post_remove_distdir)
 
 # This target untars the dist file and tries a VPATH configuration.  Then
 # it guarantees that the distribution is self-contained by making another
@@ -842,8 +870,6 @@ distcheck: dist
 	  GZIP=$(GZIP_ENV) gzip -dc $(distdir).tar.gz | $(am__untar) ;;\
 	*.tar.bz2*) \
 	  bzip2 -dc $(distdir).tar.bz2 | $(am__untar) ;;\
-	*.tar.lzma*) \
-	  lzma -dc $(distdir).tar.lzma | $(am__untar) ;;\
 	*.tar.lz*) \
 	  lzip -dc $(distdir).tar.lz | $(am__untar) ;;\
 	*.tar.xz*) \
@@ -889,7 +915,7 @@ distcheck: dist
 	  && $(MAKE) $(AM_MAKEFLAGS) distcleancheck \
 	  && cd "$$am__cwd" \
 	  || exit 1
-	$(am__remove_distdir)
+	$(am__post_remove_distdir)
 	@(echo "$(distdir) archives ready for distribution: "; \
 	  list='$(DIST_ARCHIVES)'; for i in $$list; do echo $$i; done) | \
 	  sed -e 1h -e 1s/./=/g -e 1p -e 1x -e '$$p' -e '$$x'
@@ -1034,13 +1060,15 @@ ps-am:
 uninstall-am: uninstall-binPROGRAMS
 
 .MAKE: $(RECURSIVE_CLEAN_TARGETS) $(RECURSIVE_TARGETS) all check-am \
-	ctags-recursive install-am install-strip tags-recursive
+	cscopelist-recursive ctags-recursive install-am install-strip \
+	tags-recursive
 
 .PHONY: $(RECURSIVE_CLEAN_TARGETS) $(RECURSIVE_TARGETS) CTAGS GTAGS \
 	all all-am am--refresh check check-TESTS check-am clean \
-	clean-binPROGRAMS clean-generic clean-noinstLIBRARIES ctags \
-	ctags-recursive dist dist-all dist-bzip2 dist-gzip dist-hook \
-	dist-lzip dist-lzma dist-shar dist-tarZ dist-xz dist-zip \
+	clean-binPROGRAMS clean-cscope clean-generic \
+	clean-noinstLIBRARIES cscope cscopelist cscopelist-recursive \
+	ctags ctags-recursive dist dist-all dist-bzip2 dist-gzip \
+	dist-hook dist-lzip dist-shar dist-tarZ dist-xz dist-zip \
 	distcheck distclean distclean-compile distclean-generic \
 	distclean-hdr distclean-tags distcleancheck distdir \
 	distuninstallcheck dvi dvi-am html html-am info info-am \