Update missing script (for Automake 1.13)

git-svn-id: svn://tug.org/texlive/trunk@28673 c570f23f-e606-0410-a88d-b1316a301751

1 files changed, 144 insertions, 259 deletions

diff --git a/Build/source/build-aux/missing b/Build/source/build-aux/missing
index 9a5564823de..ed429b4dd9b 100755
--- a/Build/source/build-aux/missing
+++ b/Build/source/build-aux/missing
@@ -1,10 +1,10 @@
 #! /bin/sh
-# Common stub for a few missing GNU programs while installing.
+# Common wrapper for a few potentially missing GNU programs.
 
-scriptversion=2012-01-06.18; # UTC
+scriptversion=2012-06-26.16; # UTC
 
 # Copyright (C) 1996-2012 Free Software Foundation, Inc.
-# Originally by Fran,cois Pinard <pinard@iro.umontreal.ca>, 1996.
+# Originally written by Fran,cois Pinard <pinard@iro.umontreal.ca>, 1996.
 
 # This program is free software; you can redistribute it and/or modify
 # it under the terms of the GNU General Public License as published by
@@ -29,61 +29,33 @@ if test $# -eq 0; then
   exit 1
 fi
 
-run=:
-sed_output='s/.* --output[ =]\([^ ]*\).*/\1/p'
-sed_minuso='s/.* -o \([^ ]*\).*/\1/p'
-
-# In the cases where this matters, 'missing' is being run in the
-# srcdir already.
-if test -f configure.ac; then
-  configure_ac=configure.ac
-else
-  configure_ac=configure.in
-fi
+case $1 in
 
-msg="missing on your system"
+  --is-lightweight)
+    # Used by our autoconf macros to check whether the available missing
+    # script is modern enough.
+    exit 0
+    ;;
 
-case $1 in
---run)
-  # Try to run requested program, and just exit if it succeeds.
-  run=
-  shift
-  "$@" && exit 0
-  # Exit code 63 means version mismatch.  This often happens
-  # when the user try to use an ancient version of a tool on
-  # a file that requires a minimum version.  In this case we
-  # we should proceed has if the program had been absent, or
-  # if --run hadn't been passed.
-  if test $? = 63; then
-    run=:
-    msg="probably too old"
-  fi
-  ;;
+  --run)
+    # Back-compat with the calling convention used by older automake.
+    shift
+    ;;
 
   -h|--h|--he|--hel|--help)
     echo "\
 $0 [OPTION]... PROGRAM [ARGUMENT]...
 
-Handle 'PROGRAM [ARGUMENT]...' for when PROGRAM is missing, or return an
-error status if there is no known handling for PROGRAM.
+Run 'PROGRAM [ARGUMENT]...', returning a proper advice when this fails due
+to PROGRAM being missing or too old.
 
 Options:
   -h, --help      display this help and exit
   -v, --version   output version information and exit
-  --run           try to run the given command, and emulate it if it fails
 
 Supported PROGRAM values:
-  aclocal      touch file 'aclocal.m4'
-  autoconf     touch file 'configure'
-  autoheader   touch file 'config.h.in'
-  autom4te     touch the output file, or create a stub one
-  automake     touch all 'Makefile.in' files
-  bison        create 'y.tab.[ch]', if possible, from existing .[ch]
-  flex         create 'lex.yy.c', if possible, from existing .c
-  help2man     touch the output file
-  lex          create 'lex.yy.c', if possible, from existing .c
-  makeinfo     touch the output file
-  yacc         create 'y.tab.[ch]', if possible, from existing .[ch]
+  aclocal   autoconf  autoheader   autom4te  automake  makeinfo
+  bison     yacc      flex         lex       help2man
 
 Version suffixes to PROGRAM as well as the prefixes 'gnu-', 'gnu', and
 'g' are ignored when checking the name.
@@ -98,228 +70,141 @@ Send bug reports to <bug-automake@gnu.org>."
     ;;
 
   -*)
-    echo 1>&2 "$0: Unknown '$1' option"
+    echo 1>&2 "$0: unknown '$1' option"
     echo 1>&2 "Try '$0 --help' for more information"
     exit 1
     ;;
 
 esac
 
-# normalize program name to check for.
-program=`echo "$1" | sed '
-  s/^gnu-//; t
-  s/^gnu//; t
-  s/^g//; t'`
-
-# Now exit if we have it, but it failed.  Also exit now if we
-# don't have it and --version was passed (most likely to detect
-# the program).  This is about non-GNU programs, so use $1 not
-# $program.
-case $1 in
-  lex*|yacc*)
-    # Not GNU programs, they don't have --version.
-    ;;
-
-  *)
-    if test -z "$run" && ($1 --version) > /dev/null 2>&1; then
-       # We have it, but it failed.
-       exit 1
-    elif test "x$2" = "x--version" || test "x$2" = "x--help"; then
-       # Could not run --version or --help.  This is probably someone
-       # running '$TOOL --version' or '$TOOL --help' to check whether
-       # $TOOL exists and not knowing $TOOL uses missing.
-       exit 1
-    fi
-    ;;
-esac
-
-# If it does not exist, or fails to run (possibly an outdated version),
-# try to emulate it.
-case $program in
-  aclocal*)
-    echo 1>&2 "\
-WARNING: '$1' is $msg.  You should only need it if
-         you modified 'acinclude.m4' or '${configure_ac}'.  You might want
-         to install the Automake and Perl packages.  Grab them from
-         any GNU archive site."
-    touch aclocal.m4
-    ;;
-
-  autoconf*)
-    echo 1>&2 "\
-WARNING: '$1' is $msg.  You should only need it if
-         you modified '${configure_ac}'.  You might want to install the
-         Autoconf and GNU m4 packages.  Grab them from any GNU
-         archive site."
-    touch configure
-    ;;
-
-  autoheader*)
-    echo 1>&2 "\
-WARNING: '$1' is $msg.  You should only need it if
-         you modified 'acconfig.h' or '${configure_ac}'.  You might want
-         to install the Autoconf and GNU m4 packages.  Grab them
-         from any GNU archive site."
-    files=`sed -n 's/^[ ]*A[CM]_CONFIG_HEADER(\([^)]*\)).*/\1/p' ${configure_ac}`
-    test -z "$files" && files="config.h"
-    touch_files=
-    for f in $files; do
-      case $f in
-      *:*) touch_files="$touch_files "`echo "$f" |
-				       sed -e 's/^[^:]*://' -e 's/:.*//'`;;
-      *) touch_files="$touch_files $f.in";;
-      esac
-    done
-    touch $touch_files
-    ;;
-
-  automake*)
-    echo 1>&2 "\
-WARNING: '$1' is $msg.  You should only need it if
-         you modified 'Makefile.am', 'acinclude.m4' or '${configure_ac}'.
-         You might want to install the Automake and Perl packages.
-         Grab them from any GNU archive site."
-    find . -type f -name Makefile.am -print |
-	   sed 's/\.am$/.in/' |
-	   while read f; do touch "$f"; done
-    ;;
-
-  autom4te*)
-    echo 1>&2 "\
-WARNING: '$1' is needed, but is $msg.
-         You might have modified some files without having the
-         proper tools for further handling them.
-         You can get '$1' as part of Autoconf from any GNU
-         archive site."
-
-    file=`echo "$*" | sed -n "$sed_output"`
-    test -z "$file" && file=`echo "$*" | sed -n "$sed_minuso"`
-    if test -f "$file"; then
-	touch $file
-    else
-	test -z "$file" || exec >$file
-	echo "#! /bin/sh"
-	echo "# Created by GNU Automake missing as a replacement of"
-	echo "#  $ $@"
-	echo "exit 0"
-	chmod +x $file
-	exit 1
-    fi
-    ;;
-
-  bison*|yacc*)
-    echo 1>&2 "\
-WARNING: '$1' $msg.  You should only need it if
-         you modified a '.y' file.  You may need the Bison package
-         in order for those modifications to take effect.  You can get
-         Bison from any GNU archive site."
-    rm -f y.tab.c y.tab.h
-    if test $# -ne 1; then
-        eval LASTARG=\${$#}
-	case $LASTARG in
-	*.y)
-	    SRCFILE=`echo "$LASTARG" | sed 's/y$/c/'`
-	    if test -f "$SRCFILE"; then
-	         cp "$SRCFILE" y.tab.c
-	    fi
-	    SRCFILE=`echo "$LASTARG" | sed 's/y$/h/'`
-	    if test -f "$SRCFILE"; then
-	         cp "$SRCFILE" y.tab.h
-	    fi
-	  ;;
-	esac
-    fi
-    if test ! -f y.tab.h; then
-	echo >y.tab.h
-    fi
-    if test ! -f y.tab.c; then
-	echo 'main() { return 0; }' >y.tab.c
-    fi
-    ;;
-
-  lex*|flex*)
-    echo 1>&2 "\
-WARNING: '$1' is $msg.  You should only need it if
-         you modified a '.l' file.  You may need the Flex package
-         in order for those modifications to take effect.  You can get
-         Flex from any GNU archive site."
-    rm -f lex.yy.c
-    if test $# -ne 1; then
-        eval LASTARG=\${$#}
-	case $LASTARG in
-	*.l)
-	    SRCFILE=`echo "$LASTARG" | sed 's/l$/c/'`
-	    if test -f "$SRCFILE"; then
-	         cp "$SRCFILE" lex.yy.c
-	    fi
-	  ;;
-	esac
-    fi
-    if test ! -f lex.yy.c; then
-	echo 'main() { return 0; }' >lex.yy.c
-    fi
-    ;;
-
-  help2man*)
-    echo 1>&2 "\
-WARNING: '$1' is $msg.  You should only need it if
-	 you modified a dependency of a manual page.  You may need the
-	 Help2man package in order for those modifications to take
-	 effect.  You can get Help2man from any GNU archive site."
-
-    file=`echo "$*" | sed -n "$sed_output"`
-    test -z "$file" && file=`echo "$*" | sed -n "$sed_minuso"`
-    if test -f "$file"; then
-	touch $file
-    else
-	test -z "$file" || exec >$file
-	echo ".ab help2man is required to generate this page"
-	exit $?
-    fi
-    ;;
-
-  makeinfo*)
-    echo 1>&2 "\
-WARNING: '$1' is $msg.  You should only need it if
-         you modified a '.texi' or '.texinfo' file, or any other file
-         indirectly affecting the aspect of the manual.  The spurious
-         call might also be the consequence of using a buggy 'make' (AIX,
-         DU, IRIX).  You might want to install the Texinfo package or
-         the GNU make package.  Grab either from any GNU archive site."
-    # The file to touch is that specified with -o ...
-    file=`echo "$*" | sed -n "$sed_output"`
-    test -z "$file" && file=`echo "$*" | sed -n "$sed_minuso"`
-    if test -z "$file"; then
-      # ... or it is the one specified with @setfilename ...
-      infile=`echo "$*" | sed 's/.* \([^ ]*\) *$/\1/'`
-      file=`sed -n '
-	/^@setfilename/{
-	  s/.* \([^ ]*\) *$/\1/
-	  p
-	  q
-	}' $infile`
-      # ... or it is derived from the source name (dir/f.texi becomes f.info)
-      test -z "$file" && file=`echo "$infile" | sed 's,.*/,,;s,.[^.]*$,,'`.info
-    fi
-    # If the file does not exist, the user really needs makeinfo;
-    # let's fail without touching anything.
-    test -f $file || exit 1
-    touch $file
-    ;;
+# Run the given program, remember its exit status.
+"$@"; st=$?
+
+# If it succeeded, we are done.
+test $st -eq 0 && exit 0
+
+# Also exit now if we it failed (or wasn't found), and '--version' was
+# passed; such an option is passed most likely to detect whether the
+# program is present and works.
+case $2 in --version|--help) exit $st;; esac
+
+# Exit code 63 means version mismatch.  This often happens when the user
+# tries to use an ancient version of a tool on a file that requires a
+# minimum version.
+if test $st -eq 63; then
+  msg="probably too old"
+elif test $st -eq 127; then
+  # Program was missing.
+  msg="missing on your system"
+else
+  # Program was found and executed, but failed.  Give up.
+  exit $st
+fi
 
-  *)
-    echo 1>&2 "\
-WARNING: '$1' is needed, and is $msg.
-         You might have modified some files without having the
-         proper tools for further handling them.  Check the 'README' file,
-         it often tells you about the needed prerequisites for installing
-         this package.  You may also peek at any GNU archive site, in case
-         some other package would contain this missing '$1' program."
-    exit 1
+perl_URL=http://www.perl.org/
+flex_URL=http://flex.sourceforge.net/
+gnu_software_URL=http://www.gnu.org/software
+
+program_details ()
+{
+  case $1 in
+    aclocal|automake)
+      echo "The '$1' program is part of the GNU Automake package:"
+      echo "<$gnu_software_URL/automake>"
+      echo "It also requires GNU Autoconf, GNU m4 and Perl in order to run:"
+      echo "<$gnu_software_URL/autoconf>"
+      echo "<$gnu_software_URL/m4/>"
+      echo "<$perl_URL>"
+      ;;
+    autoconf|autom4te|autoheader)
+      echo "The '$1' program is part of the GNU Autoconf package:"
+      echo "<$gnu_software_URL/autoconf/>"
+      echo "It also requires GNU m4 and Perl in order to run:"
+      echo "<$gnu_software_URL/m4/>"
+      echo "<$perl_URL>"
+      ;;
+  esac
+}
+
+give_advice ()
+{
+  # Normalize program name to check for.
+  normalized_program=`echo "$1" | sed '
+    s/^gnu-//; t
+    s/^gnu//; t
+    s/^g//; t'`
+
+  printf '%s\n' "'$1' is $msg."
+
+  configure_deps="'configure.ac' or m4 files included by 'configure.ac'"
+  case $normalized_program in
+    autoconf*)
+      echo "You should only need it if you modified 'configure.ac',"
+      echo "or m4 files included by it."
+      program_details 'autoconf'
+      ;;
+    autoheader*)
+      echo "You should only need it if you modified 'acconfig.h' or"
+      echo "$configure_deps."
+      program_details 'autoheader'
+      ;;
+    automake*)
+      echo "You should only need it if you modified 'Makefile.am' or"
+      echo "$configure_deps."
+      program_details 'automake'
+      ;;
+    aclocal*)
+      echo "You should only need it if you modified 'acinclude.m4' or"
+      echo "$configure_deps."
+      program_details 'aclocal'
+      ;;
+   autom4te*)
+      echo "You might have modified some maintainer files that require"
+      echo "the 'automa4te' program to be rebuilt."
+      program_details 'autom4te'
+      ;;
+    bison*|yacc*)
+      echo "You should only need it if you modified a '.y' file."
+      echo "You may want to install the GNU Bison package:"
+      echo "<$gnu_software_URL/bison/>"
+      ;;
+    lex*|flex*)
+      echo "You should only need it if you modified a '.l' file."
+      echo "You may want to install the Fast Lexical Analyzer package:"
+      echo "<$flex_URL>"
+      ;;
+    help2man*)
+      echo "You should only need it if you modified a dependency" \
+           "of a man page."
+      echo "You may want to install the GNU Help2man package:"
+      echo "<$gnu_software_URL/help2man/>"
     ;;
-esac
-
-exit 0
+    makeinfo*)
+      echo "You should only need it if you modified a '.texi' file, or"
+      echo "any other file indirectly affecting the aspect of the manual."
+      echo "You might want to install the Texinfo package:"
+      echo "<$gnu_software_URL/texinfo/>"
+      echo "The spurious makeinfo call might also be the consequence of"
+      echo "using a buggy 'make' (AIX, DU, IRIX), in which case you might"
+      echo "want to install GNU make:"
+      echo "<$gnu_software_URL/make/>"
+      ;;
+    *)
+      echo "You might have modified some files without having the proper"
+      echo "tools for further handling them.  Check the 'README' file, it"
+      echo "often tells you about the needed prerequisites for installing"
+      echo "this package.  You may also peek at any GNU archive site, in"
+      echo "case some other package contains this missing '$1' program."
+      ;;
+  esac
+}
+
+give_advice "$1" | sed -e '1s/^/WARNING: /' \
+                       -e '2,$s/^/         /' >&2
+
+# Propagate the correct exit status (expected to be 127 for a program
+# not found, 63 for a program that failed due to version mismatch).
+exit $st
 
 # Local variables:
 # eval: (add-hook 'write-file-hooks 'time-stamp)