cmcsc{8,9,10}.mf should only exist in the canonical cm and amsfonts distributions; the versions here differed only in whitespace thankfully. I surmise they were incorrectly copied en masse long ago.

git-svn-id: svn://tug.org/texlive/trunk@16694 c570f23f-e606-0410-a88d-b1316a301751

3 files changed, 0 insertions, 340 deletions

diff --git a/Master/texmf-dist/fonts/source/public/cmcyr/cmcsc10.mf b/Master/texmf-dist/fonts/source/public/cmcyr/cmcsc10.mf
deleted file mode 100644
index a18894f98d1..00000000000
--- a/Master/texmf-dist/fonts/source/public/cmcyr/cmcsc10.mf
+++ /dev/null
@@ -1,110 +0,0 @@
-% Computer Modern Roman Caps and Small Caps 10 point
-if unknown cmbase: input cmbase fi
- 
-font_identifier:="CMCSC"; font_size 10pt#;
- 
-% first come parameters used to set the uppercase letters
-% (including some for lowercase that aren't actually used)
-u#:=21/36pt#;      % unit width
-width_adj#:=0pt#;    % width adjustment for certain characters
-serif_fit#:=0pt#;    % extra sidebar near lowercase serifs
-cap_serif_fit#:=5/36pt#;  % extra sidebar near uppercase serifs
-letter_fit#:=5/36pt#;    % extra space added to all sidebars
- 
-body_height#:=270/36pt#;  % height of tallest characters
-asc_height#:=250/36pt#;    % height of lowercase ascenders
-cap_height#:=246/36pt#;    % height of caps
-fig_height#:=232/36pt#;    % height of numerals
-x_height#:=155/36pt#;    % height of lowercase without ascenders
-math_axis#:=90/36pt#;    % axis of symmetry for math symbols
-bar_height#:=87/36pt#;    % height of crossbar in lowercase e
-comma_depth#:=70/36pt#;    % depth of comma below baseline
-desc_depth#:=70/36pt#;    % depth of lowercase descenders
- 
-crisp#:=0pt#;      % diameter of serif corners
-tiny#:=8/36pt#;      % diameter of rounded corners
-fine#:=7/36pt#;      % diameter of sharply rounded corners
-thin_join#:=7/36pt#;    % width of extrafine details
-hair#:=9/36pt#;      % lowercase hairline breadth
-stem#:=25/36pt#;    % lowercase stem breadth
-curve#:=30/36pt#;    % lowercase curve breadth
-ess#:=27/36pt#;      % breadth in middle of lowercase s
-flare#:=33/36pt#;    % diameter of bulbs or breadth of terminals
-dot_size#:=38/36pt#;    % diameter of dots
-cap_hair#:=11/36pt#;    % uppercase hairline breadth
-cap_stem#:=32/36pt#;    % uppercase stem breadth
-cap_curve#:=37/36pt#;    % uppercase curve breadth
-cap_ess#:=35/36pt#;    % breadth in middle of uppercase s
-rule_thickness#:=.4pt#;    % thickness of lines in math symbols
- 
-dish#:=1/36pt#;      % amount erased at top or bottom of serifs
-bracket#:=20/36pt#;    % vertical distance from serif base to tangent
-jut#:=28/36pt#;      % protrusion of lowercase serifs
-cap_jut#:=37/36pt#;    % protrusion of uppercase serifs
-beak_jut#:=10/36pt#;    % horizontal protrusion of beak serifs
-beak#:=70/36pt#;    % vertical protrusion of beak serifs
-vair#:=8/36pt#;      % vertical diameter of hairlines
-notch_cut#:=10pt#;    % maximum breadth above or below notches
-bar#:=11/36pt#;      % lowercase bar thickness
-slab#:=11/36pt#;    % serif and arm thickness
-cap_bar#:=11/36pt#;    % uppercase bar thickness
-cap_band#:=11/36pt#;    % uppercase thickness above/below lobes
-cap_notch_cut#:=10pt#;    % max breadth above/below uppercase notches
-serif_drop#:=4/36pt#;    % vertical drop of sloped serifs
-stem_corr#:=1/36pt#;    % for small refinements of stem breadth
-vair_corr#:=1/36pt#;    % for small refinements of hairline height
-apex_corr#:=0pt#;    % extra width at diagonal junctions
- 
-o#:=8/36pt#;      % amount of overshoot for curves
-apex_o#:=8/36pt#;    % amount of overshoot for diagonal junctions
- 
-slant:=0;      % tilt ratio $(\Delta x/\Delta y)$
-fudge:=1;      % factor applied to weights of heavy characters
-math_spread:=0;      % extra openness of math symbols
-superness:=1/sqrt2;    % parameter for superellipses
-superpull:=1/6;      % extra openness inside bowls
-beak_darkness:=11/30;    % fraction of triangle inside beak serifs
-ligs:=1;      % level of ligatures to be included
- 
-square_dots:=false;    % should dots be square?
-hefty:=false;      % should we try hard not to be overweight?
-serifs:=true;      % should serifs and bulbs be attached?
-monospace:=false;    % should all characters have the same width?
-variant_g:=false;    % should an italic-style g be used?
-low_asterisk:=false;    % should the asterisk be centered at the axis?
-math_fitting:=false;    % should math-mode spacing be used?
- 
-% now come replacements used to set the lowercase caps
- 
-lower.u#:=16/36pt#;    % unit width
-lower.width_adj#:=0pt#;    % width adjustment for certain characters
-lower.cap_serif_fit#:=4/36pt#;  % extra sidebar near uppercase serifs
-lower.letter_fit#:=2.4/36pt#;  % extra space added to all sidebars
- 
-lower.body_height#:=200/36pt#;  % height of tallest characters
-lower.cap_height#:=185/36pt#;  % height of caps
-lower.x_height#:=116/36pt#;  % height of lowercase without ascenders
-lower.bar_height#:=65/36pt#;  % height of crossbar in lowercase e
-lower.comma_depth#:=52/36pt#;  % depth of comma below baseline
- 
-lower.flare#:=25/36pt#;    % diameter of bulbs or breadth of terminals
-lower.cap_hair#:=9.1/36pt#;  % uppercase hairline breadth
-lower.stem#:=21/36pt#;    % lowercase stem breadth
-lower.cap_stem#:=26/36pt#;  % uppercase stem breadth
-lower.cap_curve#:=31/36pt#;  % uppercase curve breadth
-lower.cap_ess#:=28/36pt#;  % breadth in middle of uppercase s
- 
-lower.cap_jut#:=26/36pt#;  % protrusion of uppercase serifs
-lower.beak_jut#:=7/36pt#;  % horizontal protrusion of beak serifs
-lower.beak#:=52/36pt#;    % vertical protrusion of beak serifs
-lower.slab#:=9.1/36pt#;    % serif and arm thickness
-lower.cap_bar#:=9.1/36pt#;  % uppercase bar thickness
-lower.cap_band#:=9.1/36pt#;  % uppercase thickness above/below lobes
-lower.cap_notch_cut#:=10pt#;  % max breadth above/below uppercase notches
- 
-lower.o#:=5/36pt#;    % amount of overshoot for curves
-lower.apex_o#:=4/36pt#;    % amount of overshoot for diagonal junctions
- 
-lower.fudge:=1;      % factor applied to weights of heavy characters
- 
-generate csc      % switch to the driver file
diff --git a/Master/texmf-dist/fonts/source/public/cmcyr/cmcsc8.mf b/Master/texmf-dist/fonts/source/public/cmcyr/cmcsc8.mf
deleted file mode 100644
index e7a3f68868c..00000000000
--- a/Master/texmf-dist/fonts/source/public/cmcyr/cmcsc8.mf
+++ /dev/null
@@ -1,115 +0,0 @@
-% CMCSC8.MF                     June 1990
-% This Metafont file is part of AMSFonts 2.0.
-% Copyright (C) 1990, American Mathematical Society.
-% All rights reserved.  Copying of this file is authorized only if either:
-%   (1) you make absolutely no changes to your copy including filename; OR
-%   (2) if you do make changes, you first rename it to some other filename.
-%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%
-% Computer Modern Roman Cap and Small Cap 8 point; created at AMS
-if unknown cmbase: input cmbase fi
- 
-font_identifier:="CMCSC"; font_size 8pt#;
- 
-u#:=18/36pt#;               % unit width
-width_adj#:=0pt#;          % width adjustment for certain characters
-serif_fit#:=0pt#;          % extra sidebar near lowercase serifs
-cap_serif_fit#:=4.1/36pt#;     % extra sidebar near uppercase serifs
-letter_fit#:=2.5/36pt#;          % extra space added to all sidebars
- 
-body_height#:=216/36pt#;     % height of tallest characters
-asc_height#:=200/36pt#;          % height of lowercase ascenders
-cap_height#:=196.8/36pt#;     % height of caps
-fig_height#:=185.6/36pt#;     % height of numerals
-x_height#:=124/36pt#;          % height of lowercase without ascenders
-math_axis#:=72/36pt#;          % axis of symmetry for math symbols
-bar_height#:=69.6/36pt#;     % height of crossbar in lowercase e
-comma_depth#:=56/36pt#;          % depth of comma below baseline
-desc_depth#:=56/36pt#;          % depth of lowercase descenders
- 
-crisp#:=0pt#;               % diameter of serif corners
-tiny#:=8/36pt#;               % diameter of rounded corners
-fine#:=7/36pt#;               % diameter of sharply rounded corners
-thin_join#:=7/36pt#;          % width of extrafine details
-hair#:=9/36pt#;               % lowercase hairline breadth
-stem#:=22/36pt#;          % lowercase stem breadth
-curve#:=25.5/36pt#;          % lowercase curve breadth
-ess#:=23/36pt#;               % breadth in middle of lowercase s
-flare#:=27/36pt#;          % diameter of bulbs or breadth of terminals
-dot_size#:=32/36pt#;          % diameter of dots
-cap_hair#:=9.5/36pt#;          % uppercase hairline breadth
-cap_stem#:=26.5/36pt#;          % uppercase stem breadth
-cap_curve#:=30/36pt#;          % uppercase curve breadth
-cap_ess#:=27/36pt#;          % breadth in middle of uppercase s
-rule_thickness#:=.36pt#;     % thickness of lines in math symbols
- 
-dish#:=1/36pt#;               % amount erased at top or bottom of serifs
-bracket#:=16/36pt#;          % vertical distance from serif base to tangent
-jut#:=22/36pt#;               % protrusion of lowercase serifs
-cap_jut#:=29/36pt#;          % protrusion of uppercase serifs
-beak_jut#:=8.4/36pt#;          % horizontal protrusion of beak serifs
-beak#:=56/36pt#;          % vertical protrusion of beak serifs
-vair#:=8/36pt#;               % vertical diameter of hairlines
-notch_cut#:=8pt#;          % maximum breadth above or below notches
-bar#:=9.5/36pt#;          % lowercase bar thickness
-slab#:=9.5/36pt#;          % serif and arm thickness
-cap_bar#:=9.5/36pt#;          % uppercase bar thickness
-cap_band#:=9.5/36pt#;          % uppercase thickness above/below lobes
-cap_notch_cut#:=8pt#;          % max breadth above/below uppercase notches
-serif_drop#:=3.2/36pt#;          % vertical drop of sloped serifs
-stem_corr#:=1/36pt#;          % for small refinements of stem breadth
-vair_corr#:=1/36pt#;          % for small refinements of hairline height
-apex_corr#:=0pt#;          % extra width at diagonal junctions
- 
-o#:=6/36pt#;               % amount of overshoot for curves
-apex_o#:=6/36pt#;          % amount of overshoot for diagonal junctions
- 
-slant:=0;               % tilt ratio $(\Delta x/\Delta y)$
-fudge:=1;               % factor applied to weights of heavy characters
-math_spread:=.4;          % extra openness of math symbols
-superness:=1/sqrt2;          % parameter for superellipses
-superpull:=1/6;               % extra openness inside bowls
-beak_darkness:=11/30;          % fraction of triangle inside beak serifs
-ligs:=1;               % level of ligatures to be included
- 
-square_dots:=false;          % should dots be square?
-hefty:=false;               % should we try hard not to be overweight?
-serifs:=true;               % should serifs and bulbs be attached?
-monospace:=false;          % should all characters have the same width?
-variant_g:=false;          % should an italic-style g be used?
-low_asterisk:=false;          % should the asterisk be centered at the axis?
-math_fitting:=false;          % should math-mode spacing be used?
- 
-% now come replacements used to set the lowercase caps
- 
-lower.u#:=13/36pt#;          % unit width
-lower.width_adj#:=0pt#;          % width adjustment for certain characters
-lower.cap_serif_fit#:=2.7/36pt#;     % extra sidebar near uppercase serifs
-lower.letter_fit#:=4/36pt#;     % extra space added to all sidebars
- 
-lower.body_height#:=146/36pt#;     % height of tallest characters
-lower.cap_height#:=145.8/36pt#;     % height of caps
-lower.x_height#:=85/36pt#;     % height of lowercase without ascenders
-lower.bar_height#:=47.6/36pt#;     % height of crossbar in lowercase e
-lower.comma_depth#:=38/36pt#;     % depth of comma below baseline
- 
-lower.flare#:=20/36pt#;          % diameter of bulbs or breadth of terminals
-lower.cap_hair#:=8.1/36pt#;     % uppercase hairline breadth
-lower.stem#:=17/36pt#;          % lowercase stem breadth
-lower.cap_stem#:=21/36pt#;     % uppercase stem breadth
-lower.cap_curve#:=25/36pt#;     % uppercase curve breadth
-lower.cap_ess#:=20/36pt#;     % breadth in middle of uppercase s
- 
-lower.cap_jut#:=20/36pt#;     % protrusion of uppercase serifs
-lower.beak_jut#:=5.4/36pt#;     % horizontal protrusion of beak serifs
-lower.beak#:=38/36pt#;          % vertical protrusion of beak serifs
-lower.slab#:=8.1/36pt#;          % serif and arm thickness
-lower.cap_bar#:=8.1/36pt#;     % uppercase bar thickness
-lower.cap_band#:=8.1/36pt#;     % uppercase thickness above/below lobes
-lower.cap_notch_cut#:=8pt#;     % max breadth above/below uppercase notches
- 
-lower.o#:=4/36pt#;          % amount of overshoot for curves
-lower.apex_o#:=3/36pt#;          % amount of overshoot for diagonal junctions
- 
-lower.fudge:=1;               % factor applied to weights of heavy characters
- 
-generate csc               % switch to the driver file
diff --git a/Master/texmf-dist/fonts/source/public/cmcyr/cmcsc9.mf b/Master/texmf-dist/fonts/source/public/cmcyr/cmcsc9.mf
deleted file mode 100644
index 599bcd3ca01..00000000000
--- a/Master/texmf-dist/fonts/source/public/cmcyr/cmcsc9.mf
+++ /dev/null
@@ -1,115 +0,0 @@
-% CMCSC9.MF                     June 1990
-% This Metafont file is part of AMSFonts 2.0.
-% Copyright (C) 1990, American Mathematical Society.
-% All rights reserved.  Copying of this file is authorized only if either:
-%   (1) you make absolutely no changes to your copy including filename; OR
-%   (2) if you do make changes, you first rename it to some other filename.
-%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%
-% Computer Modern Roman Caps and Small Caps 9 point; created at AMS
-if unknown cmbase: input cmbase fi
- 
-font_identifier:="CMCSC"; font_size 9pt#;
- 
-u#:=19/36pt#;               % unit width
-width_adj#:=0pt#;          % width adjustment for certain characters
-serif_fit#:=0pt#;          % extra sidebar near lowercase serifs
-cap_serif_fit#:=4.6/36pt#;     % extra sidebar near uppercase serifs
-letter_fit#:=3.5/36pt#;          % extra space added to all sidebars
- 
-body_height#:=243/36pt#;     % height of tallest characters
-asc_height#:=225/36pt#;          % height of lowercase ascenders
-cap_height#:=221.4/36pt#;     % height of caps
-fig_height#:=208.8/36pt#;     % height of numerals
-x_height#:=139.5/36pt#;          % height of lowercase without ascenders
-math_axis#:=81/36pt#;          % axis of symmetry for math symbols
-bar_height#:=78.3/36pt#;     % height of crossbar in lowercase e
-comma_depth#:=63/36pt#;          % depth of comma below baseline
-desc_depth#:=63/36pt#;          % depth of lowercase descenders
- 
-crisp#:=0pt#;               % diameter of serif corners
-tiny#:=8/36pt#;               % diameter of rounded corners
-fine#:=7/36pt#;               % diameter of sharply rounded corners
-thin_join#:=7/36pt#;          % width of extrafine details
-hair#:=9/36pt#;               % lowercase hairline breadth
-stem#:=24/36pt#;          % lowercase stem breadth
-curve#:=28/36pt#;          % lowercase curve breadth
-ess#:=25/36pt#;               % breadth in middle of lowercase s
-flare#:=30/36pt#;          % diameter of bulbs or breadth of terminals
-dot_size#:=35/36pt#;          % diameter of dots
-cap_hair#:=10/36pt#;          % uppercase hairline breadth
-cap_stem#:=29/36pt#;          % uppercase stem breadth
-cap_curve#:=33/36pt#;          % uppercase curve breadth
-cap_ess#:=31/36pt#;          % breadth in middle of uppercase s
-rule_thickness#:=.38pt#;     % thickness of lines in math symbols
- 
-dish#:=1/36pt#;               % amount erased at top or bottom of serifs
-bracket#:=18/36pt#;          % vertical distance from serif base to tangent
-jut#:=25/36pt#;               % protrusion of lowercase serifs
-cap_jut#:=33/36pt#;          % protrusion of uppercase serifs
-beak_jut#:=9.2/36pt#;          % horizontal protrusion of beak serifs
-beak#:=63/36pt#;          % vertical protrusion of beak serifs
-vair#:=8/36pt#;               % vertical diameter of hairlines
-notch_cut#:=9pt#;          % maximum breadth above or below notches
-bar#:=10/36pt#;               % lowercase bar thickness
-slab#:=10/36pt#;          % serif and arm thickness
-cap_bar#:=10/36pt#;          % uppercase bar thickness
-cap_band#:=10/36pt#;          % uppercase thickness above/below lobes
-cap_notch_cut#:=9pt#;          % max breadth above/below uppercase notches
-serif_drop#:=3.6/36pt#;          % vertical drop of sloped serifs
-stem_corr#:=1/36pt#;          % for small refinements of stem breadth
-vair_corr#:=1/36pt#;          % for small refinements of hairline height
-apex_corr#:=0pt#;          % extra width at diagonal junctions
- 
-o#:=7/36pt#;               % amount of overshoot for curves
-apex_o#:=7/36pt#;          % amount of overshoot for diagonal junctions
- 
-slant:=0;               % tilt ratio $(\Delta x/\Delta y)$
-fudge:=1;               % factor applied to weights of heavy characters
-math_spread:=.2;          % extra openness of math symbols
-superness:=1/sqrt2;          % parameter for superellipses
-superpull:=1/6;               % extra openness inside bowls
-beak_darkness:=11/30;          % fraction of triangle inside beak serifs
-ligs:=1;               % level of ligatures to be included
- 
-square_dots:=false;          % should dots be square?
-hefty:=false;               % should we try hard not to be overweight?
-serifs:=true;               % should serifs and bulbs be attached?
-monospace:=false;          % should all characters have the same width?
-variant_g:=false;          % should an italic-style g be used?
-low_asterisk:=false;          % should the asterisk be centered at the axis?
-math_fitting:=false;          % should math-mode spacing be used?
- 
-% now come replacements used to set the lowercase caps
- 
-lower.u#:=14.5/36pt#;          % unit width
-lower.width_adj#:=0pt#;          % width adjustment for certain characters
-lower.cap_serif_fit#:=3.4/36pt#;      % extra sidebar near uppercase serifs
-lower.letter_fit#:=3.5/36pt#;     % extra space added to all sidebars
-                      
-lower.body_height#:=173/36pt#;     % height of tallest characters
-lower.cap_height#:=170.4/36pt#;     % height of caps
-lower.x_height#:=100.5/36pt#;     % height of lowercase without ascenders
-lower.bar_height#:=56.3/36pt#;     % height of crossbar in lowercase e
-lower.comma_depth#:=45/36pt#;     % depth of comma below baseline
- 
-lower.flare#:=22/36pt#;          % diameter of bulbs or breadth of terminals
-lower.cap_hair#:=8.6/36pt#;     % uppercase hairline breadth
-lower.stem#:=19/36pt#;          % lowercase stem breadth
-lower.cap_stem#:=23.5/36pt#;     % uppercase stem breadth
-lower.cap_curve#:=28/36pt#;     % uppercase curve breadth
-lower.cap_ess#:=24/36pt#;     % breadth in middle of uppercase s
- 
-lower.cap_jut#:=23/36pt#;     % protrusion of uppercase serifs
-lower.beak_jut#:=6.2/36pt#;     % horizontal protrusion of beak serifs
-lower.beak#:=45/36pt#;          % vertical protrusion of beak serifs
-lower.slab#:=8.6/36pt#;          % serif and arm thickness
-lower.cap_bar#:=8.6/36pt#;     % uppercase bar thickness
-lower.cap_band#:=8.6/36pt#;     % uppercase thickness above/below lobes
-lower.cap_notch_cut#:=9pt#;     % max breadth above/below uppercase notches
- 
-lower.o#:=4.5/36pt#;          % amount of overshoot for curves
-lower.apex_o#:=3/36pt#;       % amount of overshoot for diagonal junctions
- 
-lower.fudge:=1;               % factor applied to weights of heavy characters
- 
-generate csc               % switch to the driver file