toptesi 5.00 (15dec08)

git-svn-id: svn://tug.org/texlive/trunk@11635 c570f23f-e606-0410-a88d-b1316a301751

18 files changed, 276 insertions, 49 deletions

diff --git a/Master/texmf-dist/doc/latex/toptesi/README b/Master/texmf-dist/doc/latex/toptesi/README
index 76107241bea..a06cfb8c3d0 100644
--- a/Master/texmf-dist/doc/latex/toptesi/README
+++ b/Master/texmf-dist/doc/latex/toptesi/README
@@ -1,10 +1,29 @@
 The TOPtesi bundle contains everything is needed for typesetting a bachelor,
 master or PhD thesis in Italian (or in any other language supported
-by LaTeX: the bundle is constructed to support multilingual use).
+by LaTeX: the bundle is constructed to support multilanguage use).
 The infix strings may be selected and specified at will by means
 of a configuration file, so as to customize the layout of the
 front page to the requirements of a specific university.  
 
 Thanks to its language management, the bundle is suited for multilanguage
 theses that are becoming more and more frequent thanks to the
-double degree programs of the European Union Socrates programs.
\ No newline at end of file
+double degree programs of the European Union Erasmus programs.
+
+For installation either read the Italian documentation in toptesi-doc.pdf
+or quickly decompress the toptesi.zip file and move
+
+toptesi-doc.pdf
+toptesi.dtx
+toptesi.ins
+
+in your local texmf tree, for example in /texmf/doc/latex/toptesi.
+
+Then move all other files into /texmf/tex/latex/toptesi.
+
+If the cited folders do not exist, create them.
+
+If you are runing a Windows platform change the slashes into backslashes
+and prefix all paths with the drive letter and any other specific prefix 
+that is present in your local texmf tree.
+
+In any case remeber to refresh your filename database!
\ No newline at end of file
diff --git a/Master/texmf-dist/doc/latex/toptesi/logoEPFL.eps b/Master/texmf-dist/doc/latex/toptesi/logoEPFL.eps
new file mode 100644
index 00000000000..98c352ecbca
--- /dev/null
+++ b/Master/texmf-dist/doc/latex/toptesi/logoEPFL.eps
diff --git a/Master/texmf-dist/doc/latex/toptesi/logoEPFL.pdf b/Master/texmf-dist/doc/latex/toptesi/logoEPFL.pdf
new file mode 100644
index 00000000000..09e0df874b3
--- /dev/null
+++ b/Master/texmf-dist/doc/latex/toptesi/logoEPFL.pdf
diff --git a/Master/texmf-dist/doc/latex/toptesi/logounibg.pdf b/Master/texmf-dist/doc/latex/toptesi/logounibg.pdf
index 602d3fe0eaa..ddde99cb5d7 100644
--- a/Master/texmf-dist/doc/latex/toptesi/logounibg.pdf
+++ b/Master/texmf-dist/doc/latex/toptesi/logounibg.pdf
diff --git a/Master/texmf-dist/doc/latex/toptesi/logounibo.gif b/Master/texmf-dist/doc/latex/toptesi/logounibo.gif
deleted file mode 100644
index f24be50e3a0..00000000000
--- a/Master/texmf-dist/doc/latex/toptesi/logounibo.gif
+++ /dev/null
diff --git a/Master/texmf-dist/doc/latex/toptesi/manifest.txt b/Master/texmf-dist/doc/latex/toptesi/manifest.txt
index bcf8290e380..9ef04d92d3e 100644
--- a/Master/texmf-dist/doc/latex/toptesi/manifest.txt
+++ b/Master/texmf-dist/doc/latex/toptesi/manifest.txt
@@ -1,5 +1,5 @@
 manifest.txt
-Copyright 2005-2006 Claudio Beccari
+Copyright 2008 Claudio Beccari
 
 This work may be distributed and/or modified under the conditions of
 the LaTeX Project Public License, either version 1.3 of this license or
@@ -20,6 +20,7 @@ This work consists of the following files
     toptesi.dtx
     toptesi.ins
     toptesi-doc.pdf
+    README
 
 The files derived from the work are the following:
 
@@ -36,7 +37,7 @@ toptesi.dtx. The documentation in Italian is contained in
 toptesi-doc.pdf. These documentations are complementary to one another.
 
 The logos of the Institutes of Technology of Turin (Politecnico
-di Torino) Bari, and Grenoble, of the Universities of Trieste,
+di Torino), Bari, Lausanne and Grenoble, of the Universities of Trieste,
 Torino,  Bologna, Bari, Bergamo, Brescia, Genova, Palermo, Padova,
 Pisa, Piemonte Orientale, Roma-1, Roma-2, Roma-3, Salerno, and
 Urbino belong to the corresponding universities and are generally
@@ -44,15 +45,17 @@ of free usage. They are distributed for the convenience of the
 users of this work; other logos may be downloadable from the sites
 of other universities.
 
-In any case, before using any logo, the user is obliged to
-inquire at the relevant University in order to find out if there are
-any prominent or subtle limitations in the use of such logo. The
+In any case, before using any logo, the user must inquire at the 
+relevant University in order to find out if there are
+any prominent or subtle limitations in the use of their logo. The
 fraudulent or improper use of these logos is in the complete
 responsibility of the user.
 
 The file
 
-    toptesi.tex
+    toptesi-example.tex
 
 is an example of the usage of this work; it may be used as a template,
 but in itself it is not part of this Work
+
+The file toptesi-example.xmpdata is an example of the contents and format of the metadata that must be included into the the same directatory as the thesis main file in order to be able to use pdflatex for typesetting a file that hopefully is PDF/A-1b compliant, that is in the "weak" archivable PDF format.
diff --git a/Master/texmf-dist/doc/latex/toptesi/toptesi-doc.pdf b/Master/texmf-dist/doc/latex/toptesi/toptesi-doc.pdf
index a26dd4c0a38..9c0470c6d60 100644
--- a/Master/texmf-dist/doc/latex/toptesi/toptesi-doc.pdf
+++ b/Master/texmf-dist/doc/latex/toptesi/toptesi-doc.pdf
diff --git a/Master/texmf-dist/doc/latex/toptesi/toptesi.tex b/Master/texmf-dist/doc/latex/toptesi/toptesi-example.tex
index 4ff6bad8b06..f45eef221af 100644
--- a/Master/texmf-dist/doc/latex/toptesi/toptesi.tex
+++ b/Master/texmf-dist/doc/latex/toptesi/toptesi-example.tex
@@ -1,6 +1,17 @@
 %%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%% 1.o Esempio con la classe toptesi
-\documentclass[12pt,twoside]{toptesi}
+%\documentclass[12pt,twoside,cucitura]{toptesi}
+\documentclass[twoside,cucitura,pdfa]{toptesi}
 %%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%% 2.o Esempio con la classe toptesi
+% Commentare le righe seguenti se NON si è specificata l'opzione "pdfa"
+\hypersetup{%
+    pdfpagemode={UseOutlines},
+    bookmarksopen,
+    pdfstartview={FitH},
+    colorlinks,
+    linkcolor={blue},
+    citecolor={red},
+    urlcolor={blue}
+  }
 % \documentclass[11pt,twoside,oldstyle,autoretitolo,classica,greek]{toptesi}
 % \usepackage[or]{teubner}
 %%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%
@@ -16,9 +27,9 @@
 % Cambiare encoding a piacere; oppure non caricare nessun encoding se si usano
 % solo caratteri a 7 bit (ASCII) nei file d'entrata.
 %
-%\usepackage[ansinew]{inputenc}
-\usepackage[latin1]{inputenc}
-% Aggiungere o togliere i commenti per provare le varie possibilita'
+%\usepackage[ansinew]{inputenc}% per macchine Windows
+\usepackage[latin1]{inputenc}% per macchine Linux/Mac/UNIX
+%\usepackage[T1]{fontenc}
 %
 %\ateneo{Universit{\`a} degli Studi di Trieste}
 \facolta[III]{Matematica, Fisica\\e Scienze Naturali}
@@ -32,10 +43,10 @@
 \secondocandidato{Evangelista \textsc{Torricelli}}% per la laurea magistrale solamente
 %\direttore{prof. Albert Einstein}% per il dottorato
 %\coordinatore{prof. Albert Einstein}% per il dottorato
-\relatore{prof.\ Albert Einstein}% per la laurea
-\secondorelatore{ing.~Wernher von Braun}% per la laurea magistrale
-\terzorelatore{dott.\ Neil Armstrong}% per la laurea magistrale
-\tutore{ing.~Karl Von Braun}% per il dottorato
+\relatore{prof.\ Albert Einstein}% per la laurea eo il dottorato
+%\secondorelatore{dipl.~ing.~Werner von Braun}% per la laurea magistrale
+%\terzorelatore{{\tabular{@{}l}dott.\ Neil Armstrong\\prof. Maria Rossi\endtabular}}% per la laurea magistrale
+%\tutore{ing.~Karl Von Braun}% per il dottorato
 \tutoreaziendale{dott.\ ing.\ Giovanni Giacosa}
 \NomeTutoreAziendale{Supervisore aziendale\\Centro Ricerche FIAT}
 %\sedutadilaurea{Agosto 1615}% per la laurea quinquennale
@@ -49,8 +60,20 @@
 %\chapterbib %solo per vedere che cosa succede; e' preferibile comporre una sola bibliografia
 %\AdvisorName{Supervisors}
 \newtheorem{osservazione}{Osservazione}% Standard LaTeX
-\begin{document}\errorcontextlines=9
 
+%\usepackage[a-1b]{pdfx}
+%\hypersetup{%
+%    pdfpagemode={UseOutlines},
+%    bookmarksopen,
+%    pdfstartview={FitH},
+%    colorlinks,
+%    linkcolor={blue},
+%    citecolor={green},
+%    urlcolor={blue}
+%  }
+
+
+\begin{document}\errorcontextlines=9
 
 \expandafter\ifx\csname StileTrieste\endcsname\relax
     \frontespizio
@@ -65,14 +88,13 @@
 \fi
 
 
-%\TRON
 \sommario
 
  La pressione barometrica di Giove viene misurata
 mediante un metodo originale  messo a punto dai candidati, che si basa
 sul rilevamento telescopico della pressione.
 
-\ringraziamenti%\TROF
+\ringraziamenti
 
 I candidati ringraziano vivamente il Granduca di Toscana per i mezzi
 messi loro a disposizione, ed il signor Von Braun, assistente del
@@ -146,7 +168,7 @@ Le grandezze in gioco sono evidenziate nella figura \ref{fig1}.
 \put(70,30){\line(0,-1){30}}
 \put(70,0){\line(-1,0){40}}
 \end{picture}
-\caption{Orbita del generico satellite\label{fig1}}
+\caption{Orbita del generico satellite; si noti l'eccentricità dell'orbita rispetto al pianeta.\label{fig1}}
 \end{figure}
 
 Per misurare le grandezze che compaiono in questa formula {\`e} necessario
diff --git a/Master/texmf-dist/doc/latex/toptesi/toptesi-example.xmpdata b/Master/texmf-dist/doc/latex/toptesi/toptesi-example.xmpdata
new file mode 100644
index 00000000000..a23616b5fab
--- /dev/null
+++ b/Master/texmf-dist/doc/latex/toptesi/toptesi-example.xmpdata
@@ -0,0 +1,3 @@
+\Title{La pressione barometrica di Giove}
+\Author{Galileo Galilei, Evangelista Torricelli}
+\Keywords{Giove</rdf:li><rdf:li>Pressione</rdf:li><rdf:li>Satelliti medicei</rdf:li><rdf:li>Barometro}
\ No newline at end of file
diff --git a/Master/texmf-dist/doc/latex/toptesi/toptesi.pdf b/Master/texmf-dist/doc/latex/toptesi/toptesi.pdf
new file mode 100644
index 00000000000..ff3833e37e8
--- /dev/null
+++ b/Master/texmf-dist/doc/latex/toptesi/toptesi.pdf
diff --git a/Master/texmf-dist/source/latex/toptesi/toptesi.dtx b/Master/texmf-dist/source/latex/toptesi/toptesi.dtx
index fe502447533..51194f9c3f0 100644
--- a/Master/texmf-dist/source/latex/toptesi/toptesi.dtx
+++ b/Master/texmf-dist/source/latex/toptesi/toptesi.dtx
@@ -27,7 +27,7 @@
 % \iffalse
 %<*driver>
 \documentclass{ltxdoc}
-\ProvidesFile{toptesi.dtx}[2006/12/15 v.4.06 Documented TeX file for
+\ProvidesFile{toptesi.dtx}[2008/12/14 v.5.00 Documented TeX file for
 the TOPtesi bundle]
 \GetFileInfo{toptesi.dtx}
 \title{The TOPtesi bundle}
@@ -42,7 +42,7 @@ the TOPtesi bundle]
 %</driver>
 % \fi
 %
-% \CheckSum{2842}
+% \CheckSum{2912}
 %
 %% \CharacterTable
 %%  {Upper-case    \A\B\C\D\E\F\G\H\I\J\K\L\M\N\O\P\Q\R\S\T\U\V\W\X\Y\Z
@@ -407,6 +407,99 @@ the TOPtesi bundle]
 % All these commands are defined into the separate package \texttt{topcoman.sty}
 % that can be used as an independent extension package for any document class.
 %
+% \section{Format PDF suitable for archiving}
+% Politecnico di Torino as well as many other Italian and non Italian universities are
+% moving towards archiving theses in electronic format, specifically in the PDF one. The
+% problem of course is: ``Will it be possible to read the archived documents, say, fifty
+% years from now?''
+%
+% This essential question has been answered by the International Standards Organization
+% (ISO) that in 2005 published the regulation ISO~19005-1. This regulation defines a
+% PDF variant suitable for archiving, named PDF/A, that has two sub-formats
+% distinguished as PDF/A-1a, and PDF/a-1b. The `a' sub-format is more exacting, while
+% the `b' one is less stringent.
+%
+% The requirements for the `a' sub-format imply not only those imposed on the `b' one,
+% but also that all characters are conforming to UNICODE and that the logical structure
+% of the document be maintained. The requirements for the `b' sub-format are that the
+% document must be reproducible without modifications exactly as it was at the moment
+% of archiving. Both sub-formats must contain \emph{metadata} that are searchable even
+% without decompressing the normally compressed PDF file, and that contain information
+% useful for archive maintenance; among these informations, of course, the PDF/A
+% category the document belongs to, the document title, the authors, and few other
+% optional information, such as the keywords that ease up the library search.
+%
+% Since version 1.40, the program \texttt{pdflatex}, possibly with the addition of
+% some patches, is capable of producing PDF/A-1b conforming files, provided that some
+% attention is put into the manipulation of the source file of the thesis. With the
+% distribution of the 2008 version of the \TeX\ system, the executable \texttt{pdflatex}
+% has version number 1.40.9 and should be capable of producing PDF/A-1b files without
+% the need of any patch.
+%
+% The particular attention needed to avoid problems with the PDF/A certification is
+% summarized as follows:
+% \begin{itemize}
+% \item The preliminary essential requirement is that the \texttt{pdflatex} used to
+% typeset the thesis be sufficiently recent to support the PDF/A requirements. Have 
+% a 2008, or even better, a 2009 version of the \TeX\ system installed on your PC.
+% Do not try to typeset the thesis
+% with the `old' \LaTeX; you must process the input thesis file(s) with
+% \texttt{pdflatex}; in the following, no specific check will be made in order
+% to verify if you are actually
+% using \texttt{pdflatex}. If you really need to use the `old' \LaTeX, you get a DVI
+% file and you need to transform it with |dvips| into a PS file; at this point you
+% have lost the possibility of exploiting the internal commands of |pdflatex| version
+% 1.40.9 or later. You can still produce a PDF/A final document, but you have to
+% transform it with |ghostscript|; read the |ghostscript| (version 8.61 or later)
+% documentation file |ps2pdf.html| in order to find out how to produce the correct PS 
+% to PDF/A transformation.
+
+% \item Download from \textsc{ctan} and install the package \textsf{pdfx}, if it is
+% not already part of your \TeX\ system installation. % \item Install in the main
+% \texttt{pdfx} directory a good version of a color model
+% profile file, such as, for example, \texttt{ECI-RGB-V1.0.icc} (see in the download
+% page of the site \texttt{www.eci.org}).
+%\item If your thesis main file, the one you run your \texttt{pdflatex} on, is named,
+% say, \texttt{JohnSmithMasterThesis.tex}, prepare in the same directory another file
+% named \texttt{JohnSmithMasterThesis.xmpdata} that contains the \emph{metadata}
+% relative to the thesis; pay attention to follow the stringent syntax described and
+% exemplified in the \textsf{pdfx} documetation. A minimal set of \emph{metadata}
+% example would be the following one:
+% \begin{verbatim}
+% \Title{Experiments in Trichotetratomy}
+% \Author{John Smith}
+% \end{verbatim}
+% Keywords require a specific XML style format that can be examined in the package
+% documentation.
+%\item Some mathematical symbol commands obtained from the standard \LaTeX\ set-up
+% and the standard mathematical fonts require some patching that is already included
+% in this \texttt{ToPtesi} bundle; but it is not excluded that with other fonts similar
+% patches might be requested.
+%\item Use only PNG and JPEG images with RGB color profiles.
+%\item If you include PDF images that contain some text, be sure that the font for
+% this text is completely embedded in the included file. Should the PDF file come
+% from an external drawing program be sure to configure that program so that it embeds
+% all the fonts used in the image. If you don't succeed, open the PDF file with
+% the free program \texttt{inkscape} and save it back in PDF format; the missing fonts
+% will be replaced with their traced outlines and this will not disturb the PDF/A
+% conformity.
+%\item Verify your final PDF file with a suitable program and do not give up doing the
+% necessary corrections or modifications while the verification program keeps saying
+% the this or that is not conforming to the PDF/A specification. A suitable program
+% is the Preflight plug-in of Adobe Acrobat Professional version 8 or later, but this,
+% although the most authoritative, is a commercial program; probably your university
+% has special facilities for this task.
+%\end{itemize}
+%
+% Up to day the realization of a PDF/A conforming file sets forth several problems
+% that are of great concern for the large Institutions that have thousands of document
+% a year to archive; it is not a question implied in the free nature of the
+% \texttt{pdflatex} program, that, on the opposite, according to our experience has
+% a very high rate of
+% success in producing PDF/A conforming documents. If you stick to the default \TeX\ 
+% system fonts and use this patched version of \texttt{ToPtesi} you should be able to
+% avoid most problems.
+%
 % \StopEventually{} ^^A qui si puo' mettere una bibliografia
 %
 % \section{Documented code}
@@ -419,7 +512,7 @@ the TOPtesi bundle]
 %<*class>
 \NeedsTeXFormat{LaTeX2e}
 \ProvidesClass{toptesi}%
-[2006/04/04 v.4.00.02 Class for typesetting university theses]
+[2008/12/15 v.5.00 Class for typesetting university theses]
 %    \end{macrocode}
 %
 % The class itself is very simple since it requires just the \texttt{report}
@@ -457,7 +550,7 @@ the TOPtesi bundle]
 %<*topsty>
 \NeedsTeXFormat{LaTeX2e}
 \ProvidesPackage{toptesi}%
-[2006/08/22 v.4.00.03 Extension for toptesi.cls]%
+[2008/12/15 v.5.00 Extension for toptesi.cls]%
 %    \end{macrocode}
 %
 % We start with defining the debugging macros; these trace commands and macros
@@ -476,23 +569,27 @@ the TOPtesi bundle]
 % files. \texttt{chapterbib} allows to set a list of references at the end of each chapter.
 %    \begin{macrocode}
 \newif\if@binding \@bindingfalse
+\newif\ifT@Ppdfa  \T@Ppdfafalse
 \newif\ifchapterbibliography \chapterbibliographyfalse
 \DeclareOption{cucitura}{\@bindingtrue}
 \DeclareOption{14pt}{\input{topsiz14.clo}}
 \DeclareOption{chapterbib}{\chapterbibliographytrue}
 \DeclareOption{trieste}{\AtEndOfPackage{\RequirePackage{trieste}}}
 \DeclareOption{classica}{\AtEndOfPackage{\RequirePackage{trieste}}}
+\DeclareOption{pdfa}{\T@Ppdfatrue}
 %
 \ProcessOptions\relax
 %    \end{macrocode}
 % The \texttt{graphicx} package is loaded by default; it is required for
-% inserting the university logo; if the user forgets that this package has already been loaded
+% inserting the university logo; if the user forgets that this package has already
+% been loaded
 % nothing dramatic happens, because the |\usepackage| and |\RequirePackage| macros
-% perform the necessary tests in order to avoid reloading the same packages again and again.
+% perform the necessary tests in order to avoid reloading the same packages again
+% and again.
 %    \begin{macrocode}
 \RequirePackage{graphicx}
 %    \end{macrocode}
-
+%
 % The text height gets set so as to cope with the standard UNI A4 size; in
 % any case the typesetting grid is set to an height of 585pt and is then
 % rounded to an integer number of lines depending on the size option
@@ -821,7 +918,7 @@ the TOPtesi bundle]
 % I initially set the caption width (a new length) to the overall text width diminished by 3em;
 % then if the caption text, inclusive of the caption type string and number, is shorter than
 % the text width it is typeset as centered text; if it exceeds the text width
-% it is set as a justified paragraph whose line with equals the established caption with;
+% it is set as a justified paragraph whose line width equals the established caption width;
 % but in any case the last line of the paragraph is measured and if it is shorter than one third
 % of the caption width, this width is shortened a little bit and the paragraph is set again
 % with this shortened caption width; in order to be sure that one iteration is
@@ -854,7 +951,7 @@ the TOPtesi bundle]
 % because the new lines do not necessarily contain the same amount of inter word
 % space, some words might have been hyphenated in a different way, and so on.
 % Moreover we do not want a caption that barely exceeds the length of
-% |\captionwidth| to be retyped into a two line caption width is about one half
+% |\captionwidth| to be retyped into a two line caption width that is about one half
 % of the width of the other captions. Therefore we allow for some white space in
 % the last line by computing the new caption width with the following formula
 % \[ y=\frac{(N+0.5)x + x_2}{N+1} \]
@@ -865,8 +962,8 @@ the TOPtesi bundle]
    \small \parskip\z@ \parindent\z@
    \finalhyphendemerits 100000\relax
    \linespread{0.95}\selectfont
-   \vskip \abovedisplayskip
-   \vskip \abovedisplayskip\captionwidth=\hsize
+   \vskip \abovecaptionskip
+   \captionwidth=\hsize
    \advance\captionwidth-3em
    \setbox0 \hbox{#1.\quad#2}%
    \ifdim\wd0>\hsize
@@ -1054,15 +1151,69 @@ Skipping any redefinition\MessageBreak}%
 \RequirePackage{topfront}
 \RequirePackage{topcoman}
 \def\sf@size{7}
+%    \end{macrocode}
 %
+% Last but not least, here come the specifications for the PDF/A-1b format. First of
+% all the patches to the macros |\not| and |\mapstochar| that produce problems with
+% the format, because they have a declared width of 0\,pt; this is no problem for
+% \texttt{latex} or \texttt{pdflatex}, but it is a problem for the PDF/A format.
+% Therefore these command must be replaced by equivalent ones that do not use zero-width
+% glyps. For |\not|, another slash can be used, but in order to have it the right size
+% in all math typesetting modes it is necessary to have a different command for
+% every mode; this is achieved with the |\mathchoice| primitive as such:
+%    \begin{macrocode}
+\renewcommand*\not{\mathrel{\mathchoice%
+	{\rlap{$\displaystyle\mkern2.5mu\mathnormal{/}$}}%
+	{\rlap{$\textstyle\mkern2.5mu\mathnormal{/}$}}%
+	{\rlap{$\scriptstyle\mkern2.5mu\mathnormal{/}$}}%
+	{\rlap{$\scriptscriptstyle\mkern2.5mu\mathnormal{/}$}}%
+}}
+%    \end{macrocode}
+% Actually the zero-width property of the slash must be simulated with a zero-width box
+% but within this box it is necessary to specify the typesetting style of the math
+% mode material.
+%
+% A similar trick is used to patch the |\mapstochar| command but no other glyph was
+% found suitable for substituting the original one; therefore we had to make it up
+% with the |picture| environment:
+%    \begin{macrocode}
+\renewcommand\mapstochar{\mathrel{\mathchoice
+{\displaystyle\unitlength=0.0555\fontdimen6\font
+   \picture(0,0)\put(1,1.5){\linethickness{0.72\unitlength}%
+   \line(0,1){6}}\endpicture}
+{\textstyle\unitlength=0.0555\fontdimen6\font
+   \picture(0,0)\put(1,1.5){\linethickness{0.72\unitlength}%
+   \line(0,1){6}}\endpicture}
+{\scriptstyle\unitlength=0.0555\fontdimen6\font
+   \picture(0,0)\put(1,0.55){\linethickness{0.61\unitlength}%
+   \line(0,1){5}}\endpicture}
+{\scriptscriptstyle\unitlength=0.0555\fontdimen6\font
+   \picture(0,0)\put(1,0.2){\linethickness{0.56\unitlength}%
+   \line(0,1){4}}\endpicture}
+}}
+%    \end{macrocode}
+% The above patches are introduced irrespective of using \texttt{pdflatex} for producing
+% a PDF/A compliant file; one might need to produce a traditional PDF file, or even a
+% DVI file, to be converted to the PS format, in order to possibly further transform
+% it to PDF/A by means of \texttt{ghostscript} (see the details in the
+% \texttt{ps2pdf.html} file belonging to the \texttt{ghostscript} documentationx).
+%
+% Finally, if the class option |pdfa| was specified, we load the |pdfx.sty| file
+% with the suitable option for typesetting a (hopefully) PDF/A conforming file.
+% We must remember that |pdfx.sty| on turn loads
+% the |hyperref.sty| file with the necessary |pdfa| option. The user, therefore does
+% not need to reload that package, but is free to configure it through the
+% |\hypersetup| command arguments right at the beginning of the thesis main file.
+%    \begin{macrocode}
+\ifT@Ppdfa\RequirePackage[a-1b]{pdfx}\fi
 %</topsty>
 %    \end{macrocode}
 % \subsection{The package file \texttt{topfront.sty}}
-% This file is input by \texttt{toptesi}, version 4.x, but it can be used as an
+% This file is input by \texttt{toptesi}, version 5.x, but it can be used as an
 % independent extension package.
 %
 % It contains all the definition for the composition of just the title page
-% along the style requirements of \texttt{toptesi}, version 4.x.
+% along the style requirements of \texttt{toptesi}, version 5.x.
 % It makes use of an optional configuration file where the user can define
 % a lot of default information and all the infix language dependent strings
 % that are peculiar to this title page.
@@ -1073,7 +1224,7 @@ Skipping any redefinition\MessageBreak}%
 %    \begin{macrocode}
 %<*topfrn>
 \NeedsTeXFormat{LaTeX2e}
-\ProvidesPackage{topfront}[2006/09/04 v.4.00.04 Title page for TOPtesi]
+\ProvidesPackage{topfront}[2008/12/15 v.5.00 Title page for TOPtesi]
 %    \end{macrocode}
 %
 % The title page information depends on the type of ``thesis' that is being typeset.
@@ -1426,7 +1577,7 @@ Skipping any redefinition\MessageBreak}%
 %
 \@ifundefined{@TesiDiLaurea}{\def\@TesiDiLaurea{Tesi di Laurea}}{}
 \@ifundefined{@phdschool}{\def\@phdschool{SCUOLA DI DOTTORATO}}{}
-\@ifundefined{@PhDname}{\def\@PhDname{Dottorato in}}{}
+\@ifundefined{@PhDname}{\def\@PhDname{Dottorato in }}{}
 \@ifundefined{@laureaname}{\def\@laureaname{Corso di Laurea in }}{}
 \@ifundefined{@dissertazione}{\def\@dissertazione{Tesi di Dottorato}}{}
 \@ifundefined{@monografia}{\def\@monografia{Monografia di Laurea}}{}
@@ -1809,7 +1960,7 @@ Skipping any redefinition\MessageBreak}%
 %<*topcmn>
 \NeedsTeXFormat{LaTeX2e} % lavora solo con LaTeX 2e
 \ProvidesPackage{topcoman}%
-    [2006/12/15 v.4.01 Additional commands for the TOPtesi bundle]
+    [2008/12/15 v.5.00 Additional commands for the TOPtesi bundle]
 %    \end{macrocode}
 % The new command |\DeclareSlantedCapitalGreekLetters| optionally sets the capital
 % Greek letters in math mode with the glyphs taken from the math italic fonts, not from
@@ -1904,7 +2055,7 @@ Skipping any redefinition\MessageBreak}%
 % environments we make sure to typeset these numerals with script size capitals;
 % this solution is not probably the best one but it works; it typesets
 % these roman numerals with the current font; for this thesis bundle roman numerals
-% are used only for folios, therefore there are no problems with a choice of fonts shapes
+% are used only for folios, therefore there are no problems with a choice of font shapes
 % and series. But for this task we need a robust command in order to set the script math
 % size
 %    \begin{macrocode}
@@ -1950,7 +2101,7 @@ Skipping any redefinition\MessageBreak}%
 %<*top14>
 \NeedsTeXFormat{LaTeX2e}
 \ProvidesFile{topsiz14.clo}%
-              [2006/04/16 v.4.00.01  TopTesi 14pt size-option file]
+              [2008/12/15 v.5.00  TopTesi 14pt size-option file]
 \renewcommand\normalsize{%
    \@setfontsize\normalsize\@xivpt{18}%
    \abovedisplayskip 14\p@ \@plus3\p@ \@minus7\p@
@@ -2135,7 +2286,7 @@ Skipping any redefinition\MessageBreak}%
 %<*toptrst>
 \NeedsTeXFormat{LaTeX2e}
 \ProvidesPackage{trieste}%
-    [2005/12/08 v.4.00.00 opzioni specifiche per Trieste]
+    [2008/12/15 v.5.00 specific options for classical thesis typesetting]
 \def\StileTrieste{classica}
 %    \end{macrocode}
 %
diff --git a/Master/texmf-dist/tex/latex/toptesi/topcoman.sty b/Master/texmf-dist/tex/latex/toptesi/topcoman.sty
index 05cc03c759a..85ec293668e 100644
--- a/Master/texmf-dist/tex/latex/toptesi/topcoman.sty
+++ b/Master/texmf-dist/tex/latex/toptesi/topcoman.sty
@@ -35,9 +35,10 @@
 %%   Right bracket \]     Circumflex    \^     Underscore    \_
 %%   Grave accent  \`     Left brace    \{     Vertical bar  \|
 %%   Right brace   \}     Tilde         \~}
+
 \NeedsTeXFormat{LaTeX2e} % lavora solo con LaTeX 2e
 \ProvidesPackage{topcoman}%
-    [2006/12/15 v.4.01 Additional commands for the TOPtesi bundle]
+    [2008/12/15 v.5.00 Additional commands for the TOPtesi bundle]
 \newcommand*\DeclareSlantedCapitalGreekLetters{%
    \mathchardef\Gamma="7100
    \mathchardef\Delta="7101
diff --git a/Master/texmf-dist/tex/latex/toptesi/topfront.sty b/Master/texmf-dist/tex/latex/toptesi/topfront.sty
index 8c0e1c4dd45..c46159c8993 100644
--- a/Master/texmf-dist/tex/latex/toptesi/topfront.sty
+++ b/Master/texmf-dist/tex/latex/toptesi/topfront.sty
@@ -35,8 +35,9 @@
 %%   Right bracket \]     Circumflex    \^     Underscore    \_
 %%   Grave accent  \`     Left brace    \{     Vertical bar  \|
 %%   Right brace   \}     Tilde         \~}
+
 \NeedsTeXFormat{LaTeX2e}
-\ProvidesPackage{topfront}[2006/09/04 v.4.00.04 Title page for TOPtesi]
+\ProvidesPackage{topfront}[2008/12/15 v.5.00 Title page for TOPtesi]
 \newif\iffemminile
 \newif\ifdottorato \dottoratofalse
 \newif\iflaureatriennale \laureatriennalefalse
@@ -173,7 +174,7 @@
 \@ifundefined{@logosede}{\let\@logosede\relax}{}
 \@ifundefined{@TesiDiLaurea}{\def\@TesiDiLaurea{Tesi di Laurea}}{}
 \@ifundefined{@phdschool}{\def\@phdschool{SCUOLA DI DOTTORATO}}{}
-\@ifundefined{@PhDname}{\def\@PhDname{Dottorato in}}{}
+\@ifundefined{@PhDname}{\def\@PhDname{Dottorato in }}{}
 \@ifundefined{@laureaname}{\def\@laureaname{Corso di Laurea in }}{}
 \@ifundefined{@dissertazione}{\def\@dissertazione{Tesi di Dottorato}}{}
 \@ifundefined{@monografia}{\def\@monografia{Monografia di Laurea}}{}
diff --git a/Master/texmf-dist/tex/latex/toptesi/topsiz14.clo b/Master/texmf-dist/tex/latex/toptesi/topsiz14.clo
index f88ff5c84ef..6275b6f6c3d 100644
--- a/Master/texmf-dist/tex/latex/toptesi/topsiz14.clo
+++ b/Master/texmf-dist/tex/latex/toptesi/topsiz14.clo
@@ -35,9 +35,10 @@
 %%   Right bracket \]     Circumflex    \^     Underscore    \_
 %%   Grave accent  \`     Left brace    \{     Vertical bar  \|
 %%   Right brace   \}     Tilde         \~}
+
 \NeedsTeXFormat{LaTeX2e}
 \ProvidesFile{topsiz14.clo}%
-              [2006/04/16 v.4.00.01  TopTesi 14pt size-option file]
+              [2008/12/15 v.5.00  TopTesi 14pt size-option file]
 \renewcommand\normalsize{%
    \@setfontsize\normalsize\@xivpt{18}%
    \abovedisplayskip 14\p@ \@plus3\p@ \@minus7\p@
diff --git a/Master/texmf-dist/tex/latex/toptesi/toptesi.cfg b/Master/texmf-dist/tex/latex/toptesi/toptesi.cfg
index 83d000a6aa3..f1063f19f47 100644
--- a/Master/texmf-dist/tex/latex/toptesi/toptesi.cfg
+++ b/Master/texmf-dist/tex/latex/toptesi/toptesi.cfg
@@ -35,6 +35,7 @@
 %%   Right bracket \]     Circumflex    \^     Underscore    \_
 %%   Grave accent  \`     Left brace    \{     Vertical bar  \|
 %%   Right brace   \}     Tilde         \~}
+
 %%
 %%================================================================
 %% This file is the only file of the TOPtesi bundle that the user
diff --git a/Master/texmf-dist/tex/latex/toptesi/toptesi.cls b/Master/texmf-dist/tex/latex/toptesi/toptesi.cls
index c5ccbd066fa..10636942b9b 100644
--- a/Master/texmf-dist/tex/latex/toptesi/toptesi.cls
+++ b/Master/texmf-dist/tex/latex/toptesi/toptesi.cls
@@ -35,9 +35,10 @@
 %%   Right bracket \]     Circumflex    \^     Underscore    \_
 %%   Grave accent  \`     Left brace    \{     Vertical bar  \|
 %%   Right brace   \}     Tilde         \~}
+
 \NeedsTeXFormat{LaTeX2e}
 \ProvidesClass{toptesi}%
-[2006/04/04 v.4.00.02 Class for typesetting university theses]
+[2008/12/15 v.5.00 Class for typesetting university theses]
 \DeclareOption*{\PassOptionsToClass{\CurrentOption}{report}}
 \ProcessOptions\relax
 \LoadClass[a4paper]{report}
diff --git a/Master/texmf-dist/tex/latex/toptesi/toptesi.sty b/Master/texmf-dist/tex/latex/toptesi/toptesi.sty
index f41e1e5d4e5..f2ef8813c8e 100644
--- a/Master/texmf-dist/tex/latex/toptesi/toptesi.sty
+++ b/Master/texmf-dist/tex/latex/toptesi/toptesi.sty
@@ -35,22 +35,24 @@
 %%   Right bracket \]     Circumflex    \^     Underscore    \_
 %%   Grave accent  \`     Left brace    \{     Vertical bar  \|
 %%   Right brace   \}     Tilde         \~}
+
 \NeedsTeXFormat{LaTeX2e}
 \ProvidesPackage{toptesi}%
-[2006/08/22 v.4.00.03 Extension for toptesi.cls]%
+[2008/12/15 v.5.00 Extension for toptesi.cls]%
 \def\TRON{\tracingcommands \tw@ \tracingmacros \tw@}
 \def\TROFF{\tracingcommands\z@ \tracingmacros \z@}
 \let\TROF\TROFF
 \newif\if@binding \@bindingfalse
+\newif\ifT@Ppdfa  \T@Ppdfafalse
 \newif\ifchapterbibliography \chapterbibliographyfalse
 \DeclareOption{cucitura}{\@bindingtrue}
 \DeclareOption{14pt}{\input{topsiz14.clo}}
 \DeclareOption{chapterbib}{\chapterbibliographytrue}
 \DeclareOption{trieste}{\AtEndOfPackage{\RequirePackage{trieste}}}
 \DeclareOption{classica}{\AtEndOfPackage{\RequirePackage{trieste}}}
+\DeclareOption{pdfa}{\T@Ppdfatrue}
 \ProcessOptions\relax
 \RequirePackage{graphicx}
-
 \textheight 585pt
 \divide\textheight by \baselineskip
 \multiply\textheight by \baselineskip
@@ -242,8 +244,8 @@
    \small \parskip\z@ \parindent\z@
    \finalhyphendemerits 100000\relax
    \linespread{0.95}\selectfont
-   \vskip \abovedisplayskip
-   \vskip \abovedisplayskip\captionwidth=\hsize
+   \vskip \abovecaptionskip
+   \captionwidth=\hsize
    \advance\captionwidth-3em
    \setbox0 \hbox{#1.\quad#2}%
    \ifdim\wd0>\hsize
@@ -331,6 +333,27 @@ Skipping any redefinition\MessageBreak}%
 \RequirePackage{topfront}
 \RequirePackage{topcoman}
 \def\sf@size{7}
+\renewcommand*\not{\mathrel{\mathchoice%
+{\rlap{$\displaystyle\mkern2.5mu\mathnormal{/}$}}%
+{\rlap{$\textstyle\mkern2.5mu\mathnormal{/}$}}%
+{\rlap{$\scriptstyle\mkern2.5mu\mathnormal{/}$}}%
+{\rlap{$\scriptscriptstyle\mkern2.5mu\mathnormal{/}$}}%
+}}
+\renewcommand\mapstochar{\mathrel{\mathchoice
+{\displaystyle\unitlength=0.0555\fontdimen6\font
+   \picture(0,0)\put(1,1.5){\linethickness{0.72\unitlength}%
+   \line(0,1){6}}\endpicture}
+{\textstyle\unitlength=0.0555\fontdimen6\font
+   \picture(0,0)\put(1,1.5){\linethickness{0.72\unitlength}%
+   \line(0,1){6}}\endpicture}
+{\scriptstyle\unitlength=0.0555\fontdimen6\font
+   \picture(0,0)\put(1,0.55){\linethickness{0.61\unitlength}%
+   \line(0,1){5}}\endpicture}
+{\scriptscriptstyle\unitlength=0.0555\fontdimen6\font
+   \picture(0,0)\put(1,0.2){\linethickness{0.56\unitlength}%
+   \line(0,1){4}}\endpicture}
+}}
+\ifT@Ppdfa\RequirePackage[a-1b]{pdfx}\fi
 \endinput
 %%
 %% End of file `toptesi.sty'.
diff --git a/Master/texmf-dist/tex/latex/toptesi/trieste.sty b/Master/texmf-dist/tex/latex/toptesi/trieste.sty
index 7bba23a367c..c6f959578d8 100644
--- a/Master/texmf-dist/tex/latex/toptesi/trieste.sty
+++ b/Master/texmf-dist/tex/latex/toptesi/trieste.sty
@@ -35,9 +35,10 @@
 %%   Right bracket \]     Circumflex    \^     Underscore    \_
 %%   Grave accent  \`     Left brace    \{     Vertical bar  \|
 %%   Right brace   \}     Tilde         \~}
+
 \NeedsTeXFormat{LaTeX2e}
 \ProvidesPackage{trieste}%
-    [2005/12/08 v.4.00.00 opzioni specifiche per Trieste]
+    [2008/12/15 v.5.00 specific options for classical thesis typesetting]
 \def\StileTrieste{classica}
 \newif\if@utoretitolo \@utoretitolofalse
 \newif\if@ldstyle \@ldstylefalse