rm tree-dvips, noinfo license, latex 2.09, c.1994

git-svn-id: svn://tug.org/texlive/trunk@20792 c570f23f-e606-0410-a88d-b1316a301751

14 files changed, 2 insertions, 1613 deletions

diff --git a/Master/texmf-dist/doc/latex/tree-dvips/Readme b/Master/texmf-dist/doc/latex/tree-dvips/Readme
deleted file mode 100644
index bb0aea098c1..00000000000
--- a/Master/texmf-dist/doc/latex/tree-dvips/Readme
+++ /dev/null
@@ -1,25 +0,0 @@
-CSLI postscript drawing macros.  Created by Emma Pease
-(emma@csli.stanford.edu).  
-
-These macros were originally created to draw the lines between nodes
-in the trees created by the tree macros in lingmacros.sty.  They will
-only work with dvips version 541 or later (by Tomas Rokicki available
-on labrea.stanford.edu) but can be easily modified to be used with
-earlier versions of dvips and slightly less easily modified for other
-dvi to postscript convertors.
-
-To install, place 
-
-tree-dvips.pro
-
-in the postscript header path for dvips. 
-
-Problems:
-
-Be wary of using page extraction programs such as dviselect as you may
-accidently drop the special command loading the header file if you do
-not include the first page.  dvips's own page selection commands will
-keep the special.
-
-
-
diff --git a/Master/texmf-dist/doc/latex/tree-dvips/lingmacros-manual.pdf b/Master/texmf-dist/doc/latex/tree-dvips/lingmacros-manual.pdf
deleted file mode 100644
index a10fb4a856c..00000000000
--- a/Master/texmf-dist/doc/latex/tree-dvips/lingmacros-manual.pdf
+++ /dev/null
diff --git a/Master/texmf-dist/doc/latex/tree-dvips/lingmacros-manual.tex b/Master/texmf-dist/doc/latex/tree-dvips/lingmacros-manual.tex
deleted file mode 100644
index e8259dd26f0..00000000000
--- a/Master/texmf-dist/doc/latex/tree-dvips/lingmacros-manual.tex
+++ /dev/null
@@ -1,139 +0,0 @@
-\documentstyle[lingmacros]{article}
-
-\title{Linguistic Macros}
-\author{Emma Pease}
-
-\begin{document}
-
-\maketitle
-
-The lingmacros file contains a few macros that may be of use to
-linguists.  The major commands are
-\begin{enumerate}
-\item The enumsentence macros for creating example sentences
-\begin{center}
-\begin{verbatim}
-\enumsentence[label]{sentence}
-\eenumsentence[label]{\item[label] sentence 1
-                      \item[label] sentence 2}
-\end{verbatim}
-\end{center}
- The enumsentence macros are similar to the math equation environment
-except that they take regular text.  The \verb+\label+ command can be
-used inside of them.\footnote{The enumsentence macros use the counter,
-enums.  For more information read the style file.} Inside of the
-eenumsentence either the \verb+\toplabel+ command for the sentence
-number only or the \verb+\label+ for sentence number and sublabel.
-Also defined is
-\verb+\ex{number}+ which gives a relative reference.  \verb+(\ex{1})+
-or \verb+(\ref{senta})+ give the number of the next enumsentence (\ex{1})
-or (\ref{senta}); \verb+(\ex{2})+ or \verb+(\ref{sentb})+ of the second
-succeeding enumsentence (\ex{2}) or (\ref{sentb}).
-\verb+(\ref{sentbb})+ will give (\ref{sentbb}).
- \enumsentence{This is the first sentence\label{senta}}
-\eenumsentence{\item this is a second sentence \toplabel{sentb}
-               \item this is a third sentence\label{sentbb}}
-\begin{center}
-\begin{verbatim}
-\enumsentence{This is the first sentence\label{senta}}
-\eenumsentence{\item this is a second sentence \toplabel{sentb}
-               \item this is a third sentence\label{sentbb}}
-\end{verbatim}
-\end{center}
-
-
-\item The tree macros
-\begin{center}
-\begin{verbatim}
-\smalltree{alignment structure}
-\modsmalltree{number of columns}{alignment structure}
-\end{verbatim}
-\end{center}
-\verb+\smalltree+ is based on the tabular environment with a large
-baselineskip. A simple example should suffice.
-\enumsentence{\smalltree{& &a\\ 
-                         &b& &c\\ 
-                        d& &e& &f}}
-\begin{center}
-\begin{verbatim}
-\enumsentence{\smalltree{& &a\\ 
-                         &b& &c\\ 
-                        d& &e& &f}}
-\end{verbatim}
-\end{center}
-\verb+\modsmalltree+ sometime works better.
-\enumsentence{\modsmalltree{5}{& &a\\ 
-                         &b& \mc{3}{this is long}\\ 
-                        d& &e& &f}}
-\begin{center}
-\begin{verbatim}
-\enumsentence{\modsmalltree{5}{& &a\\ 
-                         &b& \mc{3}{this is long}\\ 
-                        d& &e& &f}}
-\end{verbatim}
-\end{center}
- Note the use of the \verb+\mc{number of columns}{text}+ to span
-several columns.  The \verb+\clap{text}+ might also be useful; it is
-similar to the \verb+\rlap+ and \verb+\llap+ commands and produces a
-centered hbox of zero width.  Lines need to be drawn in by hand or one
-can use the tree-dvips macros. 
-
-\item The gloss macros
-\begin{center}
-\begin{verbatim}
-\shortex{number of columns}{first line}{second line}{gloss}
-\shortexnt{number of columns}{first line}{second line}
-\end{verbatim}
-\end{center}
-These can be combined to produce most of the glosses that linguists
-should need.
-\enumsentence{\shortex{6}{Was & ist & dem & Kind & geschenkt&worden?}
-                         {What& is  & the & child& given    &been?}
-                         {What has been given to the child?}
-               \item \shortexnt{7}
-{Das & Fin\'anzamt      & hat & ihn & geschnappt &(und & nicht}
-{the &finance authority & has & him & caught     &(and &not}
-
-\shortex{2}{die &Polizei).}
-           {the &police).}
-           {It was the IRS that caught him (and not the police).}}
-\begin{center}
-\begin{verbatim}
-\enumsentence{\shortex{6}{Was & ist & dem & Kind & geschenkt&worden?}
-                         {What& is  & the & child& given    &been?}
-                         {What has been given to the child?}}
-               \item \shortexnt{7}
-{Das & Fin\'anzamt      & hat & ihn & geschnappt &(und & nicht}
-{the &finance authority & has & him & caught     &(and &not}
-
-\shortex{2}{die &Polizei).}
-           {the &police)}
-           {It was the IRS that caught him (and not the police).}}
-\end{verbatim}
-\end{center}
-Unfortunately, I've not figured out a fullproof method of breaking
-the glosses automatically so they have to be done by hand.  
-
-\item AVM structures
-\begin{center}
-\begin{verbatim}
-\outerfs{text}
-\end{verbatim}
-\end{center}
-\enumsentence{\evnup[-3pt]{\outerfs{SUBJ & \outerfs{POSS & [PRED `Louise']\\
-                                             PRED &`mother$\langle$Poss$\rangle$}\\[3ex]
-                             OBJ  & \outerfs{PRED & `PRO'\\
-                                             REFL & +}\\
-                             PRED & `dress$\langle$SUBJ OBJ$\rangle$'}}}
-\begin{center}
-\begin{verbatim}
-\enumsentence{\evnup[-3pt]{%
-\outerfs{SUBJ & \outerfs{POSS & [PRED `Louise']\\
-                         PRED &`mother$\langle$Poss$\rangle$}\\[3ex]
-         OBJ  & \outerfs{PRED & `PRO'\\
-                        REFL & +}\\
-         PRED & `dress$\langle$SUBJ OBJ$\rangle$'}}}
-\end{verbatim}
-\end{center}
-\end{enumerate}
-\end{document}
\ No newline at end of file
diff --git a/Master/texmf-dist/doc/latex/tree-dvips/tree-manual.pdf b/Master/texmf-dist/doc/latex/tree-dvips/tree-manual.pdf
deleted file mode 100644
index 165270679dc..00000000000
--- a/Master/texmf-dist/doc/latex/tree-dvips/tree-manual.pdf
+++ /dev/null
diff --git a/Master/texmf-dist/doc/latex/tree-dvips/tree-manual.tex b/Master/texmf-dist/doc/latex/tree-dvips/tree-manual.tex
deleted file mode 100644
index 195b1f46273..00000000000
--- a/Master/texmf-dist/doc/latex/tree-dvips/tree-manual.tex
+++ /dev/null
@@ -1,409 +0,0 @@
-\documentstyle[tree-dvips,lingmacros]{article}
-
-\title{Tree Macros}
-\author{Emma Pease}
-
-
-\begin{document}
-
-\maketitle
-
-The tree macros package allows one to integrate \TeX\ and Postscript.
-For example, one can use \TeX\ to layout a tree and have Postscript
-draw the lines.
-\begin{center}
- \begin{tabular}{ccc}
-&\node{ab}{top node}\\[3ex]
-\node{ac}{left node} && \node{c}{right node}\\[3ex]
-              && \node{d}{odd node}
-\end{tabular}
-\nodeconnect{ab}{ac} 
-\nodeconnect{ab}{c}
-\nodeconnect{c}{d}
-\nodecurve[r]{ab}[r]{d}{1in}
-\anodeconnect[b]{ac}[l]{d}
-\anodecurve[l]{ab}[l]{ac}{1in}
-\end{center}
-
-These macros work by defining locations on a page and then
-manipulating them in a variety of ways. The commands that created the
-above tree are as follows:
- \begin{verbatim}
-\begin{tabular}{ccc}
-                    &\node{a}{top node}\\[3ex]
-\node{b}{left node} &     & \node{c}{right node}\\[3ex]
-                    &     & \node{d}{odd node}
-\end{tabular}
-\nodeconnect{a}{b} 
-\nodeconnect{a}{c}
-\nodeconnect{c}{d}
-\nodecurve[r]{a}[r]{d}{1in}
-\anodeconnect[b]{b}[l]{d}
-\anodecurve[l]{a}[l]{b}{1in}
-\end{verbatim}
-  You will notice that four nodes are defined, a, b, c, and d, using the
-\verb+\node+ command. These nodes are then connected using the
-\verb+\nodeconnect+ and \verb+\nodecurve+ commands.
-  
-\section{Locating Commands}
-
-Location commands are those that deal with defining a location on a
-page.  The basic command
- \begin{center}
-\begin{verbatim}
-\node{nodename}{object}
-\end{verbatim}
-\end{center}
-  Each node has its name, height, width, and the location of the lower
-left hand corner point passed down to postscript where it will remain
-until needed. Note that the object will be printed by \TeX\ but the
-lines drawn by Postscript. A variant
-of this command is
- \begin{center}
-\begin{verbatim}
-\nodepoint{nodename}[horizontal displace][vertical displace]
-\end{verbatim}
-\end{center}
-  The node's height and width are 0pts, but the location can be
-displaced. 
-
-\section{Connecting Commands}
-
-These commands connect two or more nodes. The two basic ones are 
-\begin{center}
-\begin{verbatim}
-\nodeconnect[fromloc]{fromnodename}[toloc]{tonodename}
-\nodecurve[fromloc]{fromnodename}[toloc]{tonodename}{depth}
-\end{verbatim}
-\end{center}
-  fromnodename and tonodename must be the names of two existing nodes.
-Imagine the node as a box, fromloc and toloc are the locations on that
-box to draw the connecting lines.
-\begin{center}\nodemargin=9pt
-\begin{tabular}{lcr}
-tl  & {t}                &{tr}\\[2ex]
-{l} & \node{a}{object}   &{r}\\[2ex]
-{bl}& {b}                &{br}
-\end{tabular}
-\nodebox{a}
-\end{center}
-  The present choices are t [top], b [bottom], l [left], r [right], tl
-[topleft], tr [topright], bl [bottomleft], and br [bottomright].
-These could be expanded.
-
-Other connecting commands are
-\begin{verbatim}
-\barnodeconnect[depth]{fromnodename}{tonodename}
-\anodeconnect[fromloc]{fromnodename}[toloc]{tonodename}
-\anodecurve[fromloc]{fromnodename}[toloc]{tonodename}{depth}
-\end{verbatim}
-For example,
-\begin{center}
-\node{c}{\strut This} \node{a}{\strut is} a \node{b}{\strut test} of
-barnodeconnect.  
-\barnodeconnect{a}{b}
-\barnodeconnect[-5pt]{a}{c}
-\bigskip\bigskip
-
-\node{c}{\strut This} \node{a}{\strut is} a \node{b}{\strut test}
-\node{d}{\strut of} abarnodeconnect.  \node{e}{\strut Note} arrows.
-\abarnodeconnect[10pt]{a}{b}
-\abarnodeconnect[-10pt]{a}{c}
-\abarnodeconnect[-10pt]{b}{d}
-\abarnodeconnect[10pt]{e}{d}
-\end{center}\bigskip
-\begin{verbatim}
-\node{c}{\strut This} \node{a}{\strut is} a \node{b}{\strut test} 
-of barnodeconnect.  
-\barnodeconnect{a}{b}
-\barnodeconnect[-5pt]{a}{c}
-\bigskip\bigskip
-
-\node{c}{\strut This} \node{a}{\strut is} a \node{b}{\strut test}
-\node{d}{\strut of} abarnodeconnect.  \node{e}{\strut Note} arrows.
-\abarnodeconnect[10pt]{a}{b}
-\abarnodeconnect[-10pt]{a}{c}
-\abarnodeconnect[-10pt]{b}{d}
-\abarnodeconnect[10pt]{e}{d}
-\end{verbatim}
-  A negative depth places the bar below the line; a positive depth (or
-the default, which is 5pt) places the bar above the line.
-
-
-A few odd commands
-\begin{verbatim}
-\nodetriangle{fromnodename}{tonodename}
-\end{verbatim}
-This creates a triangle whose apex is the bottom of
-\verb+fromnodename+ and whose base is the top of \verb+tonodename+. 
-
-\verb+\anodeconnect+ and \verb+\anodecurve+ are the same as
-\verb+\nodeconnect+ and \verb+\node-+ \verb+curve+ except that the connecting
-line has a arrowhead on it pointing to the second node.
-
-
-\section{Single Node commands}
-
-These commands adjust something around a single node rather than
-connecting nodes.  The basic commands are
- \begin{center}
-\begin{verbatim}
-\nodebox{nodename}
-\nodecircle[depth]{nodename}
-\nodeoval{nodename}
-\end{verbatim}
-\end{center}
-They draw, respectively, a box, circle, or oval around the given node.
-\begin{center}
-\node{a}{node}\hfill \node{b}{node} \hfill \node{c}{node}
-\nodebox{a} \nodecircle{b} \nodeoval{c}
-\end{center}
-  You will probably wish to call these commands after you have called
-all the connecting commands you will be using in a particular diagram. 
-
-\section{Parameters}
-
-At the moment there are three parameters that can be changed.  They
-are
-\begin{itemize}
-\item \verb+\nodemargin+ - A node's height and width are defined as
-the height plus depth and width of an hbox enclosing the object plus the
-nodemargin on each side.  The default is 2pt.
-
-\item \verb+\treelinewidth+ - The width of the lines. The default is .3pt.
-
-\item \verb+\dashlength+ - The length of the dash, if you are using
-dashed lines.   The default is 0pt (solid line).\footnote{The length
-of the dash and the length between the dashes are the same.  An
-exercise for someone who knows postscript and tex is to allow the dash
-and the blank to vary in size.}
-
-\item \verb+\arrowwidth+ - the width of the arrowhead in the
-      \verb+\anodeconnect+ and \verb+\anodecurve+ commands. Default is
-      4 pt.
-
-\item \verb+\arrowlength+ - the length of the arrowhead.  Default is
-      4pt. 
-
-\end{itemize}
-
-
-\section{How to Run}
-
-Add the style file, tree-dvips.sty, 
-\begin{verbatim}
-\documentstyle[tree-dvips]{article}
-\end{verbatim}
-Run through \LaTeX\ and send to a postscript printer using dvips
-(written by Tomas Rokicki).
-
-
-\section{Examples}
-
-A series of examples follow.
-\begin{center}
-\let\mc=\multicolumn
-\begin{tabular}[t]{@{}lllllllll@{}}
-       &    &    &      &\node{a}{VP} \\[2ex]
-       &\node{b}{PP} 
-            &    &      &    &    &\mc{2}{c}{\node{c}{V$'$}}\\[2ex]
-       &    &    &\node{d}{NP} \\[2ex]
-       &    &\nodepoint{e}   
-                 &      &\node{f}{NP} \\
-       &    &    &\hfill\nodepoint{r}[0pt][3pt]   \\
-       &\hfil\node{g}{AP} 
-            &    &\hfil\node{h}{NP}
-                        &    &    &     &\hfil\node{i}{NP}\\[2ex]
-\node{j}{P}  
-       &\hfil\node{k}{A}  
-            & \node{l}{Prt}
-                 &\hfil\node{m}{N}   
-                        &\node{n}{Prt} 
-                             &\node{o}{N} 
-                                  &\node{p}{V}
-                                        &\hfil\node{q}{N}\\[2ex]
-`zaw   &`oN &`geq&?njiaw&`geq&`dou& khe &tshjaN \\
-toward &red &    & bird &    &head& open&gun \\[1ex]
-\mc{9}{@{}l}{`shoot at the red head of the bird'} \\
-\end{tabular}
-\nodeconnect{a}{b}
-\nodeconnect{a}{c}
-\nodeconnect{b}{d}
-\nodeconnect{b}{j}
-\nodeconnect{c}{p}
-\nodeconnect{c}{i}
-\nodeconnect{d}{e}
-\nodeconnect{e}{g}
-\nodeconnect{e}{l}
-\nodeconnect{d}{f}
-\nodeconnect{g}{k}
-\nodeconnect{f}{r}
-\nodeconnect{r}{h}
-\nodeconnect{r}{n}
-\nodeconnect{f}{o}
-\nodeconnect{h}{m}
-\nodeconnect{i}{q}
-
-\end{center}
-\begin{verbatim}
-\let\mc=\multicolumn
-\begin{tabular}[t]{@{}lllllllll@{}}
-    &    &    &      &\node{a}{VP} \\[2ex]
-    &\node{b}{PP} 
-         &    &      &    &    &\mc{2}{c}{\node{c}{V$'$}}\\[2ex]
-    &    &    &\node{d}{NP} \\[2ex]
-    &    &\nodepoint{e}   
-              &      &\node{f}{NP} \\
-    &    &    &\hfill\nodepoint{r}[0pt][3pt]   \\
-    &\hfil\node{g}{AP} 
-         &    &\hfil\node{h}{NP}
-                     &    &    &     &\hfil\node{i}{NP}\\[2ex]
-\node{j}{P}  
-    &\hfil\node{k}{A}  
-         & \node{l}{Prt}
-              &\hfil\node{m}{N}   
-                     &\node{n}{Prt} 
-                          &\node{o}{N} 
-                               &\node{p}{V}
-                                     &\hfil\node{q}{N}\\[2ex]
-`zaw&`oN &`geq&?njiaw&`geq&`dou& khe &tshjaN \\
-toward &red &    & bird &    &head& open&gun \\[1ex]
-\mc{9}{@{}l}{`shoot at the red head of the bird'} \\
-\end{tabular}
-\nodeconnect{a}{b}     \nodeconnect{e}{l}
-\nodeconnect{a}{c}     \nodeconnect{d}{f}
-\nodeconnect{b}{d}     \nodeconnect{g}{k}
-\nodeconnect{b}{j}     \nodeconnect{f}{r}
-\nodeconnect{c}{p}     \nodeconnect{r}{h}
-\nodeconnect{c}{i}     \nodeconnect{r}{n}
-\nodeconnect{d}{e}     \nodeconnect{f}{o}
-\nodeconnect{e}{g}     \nodeconnect{h}{m}
-\nodeconnect{i}{q}
-\end{verbatim}
- The following two examples use \verb+\outerfs+ and
-\verb+\modsmalltree+; these are both part of the lingmacros package.
-See \verb+lingmacros.sty+ for more information.
- \enumsentence[(100)]{\evnup[2pt]
-{\outerfs{ Focus & \outerfs{subj       & \outerfs{\ \nodepoint{a}\ }\\[1ex]
-                           obl$_{th}$ & \outerfs{Pred & `Pro'\\
-                                                 Refl & +}\\[1ex]
-                           Pred       & `proud$\langle(\uparrow {\rm subj})
-                                         (\uparrow {\rm obl}_{th})\rangle$'}\nodepoint{d}[-3pt][0pt]\\[2ex]
-           Subj & \outerfs{Pred & `Max'}\\[1ex]
-           Comp & \outerfs{Subj &\outerfs{Pred & `Larry'}\nodepoint{c}[-3pt][0pt]\\[1ex]
-                           Xcomp&\outerfs{\ \nodepoint{b}\ }\\[1ex]
-                           Pred & `be$\langle(\uparrow {\rm xcomp})
-                                         (\uparrow {\rm subj})\rangle$'}\\[1ex]
-           Pred & `think$\langle(\uparrow {\rm subj})
-                                         (\uparrow {\rm comp})\rangle$'}\\
-}
-\nodecurve[r]{a}[r]{c}{2in}[.5in]
-\anodecurve[r]{d}[r]{b}{1in}[2in]
-}
-\begin{verbatim}
-\enumsentence[(100)]{\evnup[2pt]
-{\outerfs{ 
-Focus & \outerfs{subj       & \outerfs{\ \nodepoint{a}\ }\\[1ex]
-                 obl$_{th}$ & \outerfs{Pred & `Pro'\\
-                                       Refl & +}\\[1ex]
-                 Pred       & `proud$\langle(\uparrow {\rm subj})
-                             (\uparrow {\rm obl}_{th})\rangle$'}%
-\nodepoint{d}[-3pt][0pt]\\[2ex]
-Subj & \outerfs{Pred & `Max'}\\[1ex]
-Comp & \outerfs{Subj &\outerfs{Pred & `Larry'}%
-\nodepoint{c}[-3pt][0pt]\\[1ex]
-                Xcomp&\outerfs{\ \nodepoint{b}\ }\\[1ex]
-                Pred & `be$\langle(\uparrow {\rm xcomp})
-                       (\uparrow {\rm subj})\rangle$'}\\[1ex]
-Pred & `think$\langle(\uparrow {\rm subj})
-                     (\uparrow {\rm comp})\rangle$'}\\
-}
-\nodecurve[r]{a}[r]{c}{2in}[.5in]
-\anodecurve[r]{d}[r]{b}{1in}[2in]
-}
-\end{verbatim}
-\enumsentence{\modsmalltree{6}{
-             &             &   &\ns\node{a}{\begin{tabular}[t]{@{}c@{}}S\\ 
-                                  {}[+R]\end{tabular}}   \\
-             &\node{b}{NP} &   &    &  & \node{c}{VP} \\
-\node{d}{Det}&             &\node{e}{N$^1$} \\
-\node{h}{the}&\node{i}{N}  &   &  \node{f}{PP} &&\node{g}{are 
-                                              totally false}\\
-       &\node{n}{rumors}&\node{j}{P} &&\ns\node{k}{\begin{tabular}[t]{@{}c@{}}NP\\
-                                               {}[+R] \end{tabular}}\\
-         &                &\node{l}{about} &&\node{m}{whom}}
-\nodeconnect{a}{b}
-\nodeconnect{a}{c}
-\nodeconnect{b}{d}
-\nodeconnect{b}{e}
-\nodeconnect{d}{h}
-\nodeconnect{e}{i}
-\nodeconnect{e}{f}
-\nodeconnect{i}{n}
-\nodeconnect{f}{j}
-\nodeconnect{f}{k}
-\nodeconnect{j}{l}
-\nodeconnect{k}{m}
-\nodetriangle{c}{g}
-{\makedash{4pt}
-\anodecurve[t]{b}[l]{a}{10pt}
-\anodecurve[t]{e}[r]{b}{10pt}
-\anodecurve[t]{f}[r]{e}{10pt}
-\anodecurve[t]{k}[r]{f}{10pt}
-}}
-\begin{verbatim}
-\enumsentence{\modsmalltree{6}{
-     &       &   &\ns\node{a}{\begin{tabular}[t]{@{}c@{}}S\\ 
-                        {}[+R]\end{tabular}}   \\
-     &\node{b}{NP} 
-             &   &  && \node{c}{VP} \\
-\node{d}{Det}
-     &       &\node{e}{N$^1$} \\
-\node{h}{the}
-     &\node{i}{N}  
-             &   &\node{f}{PP} 
-                    &&\node{g}{are totally false}\\
-     &\node{n}{rumors}
-             &\node{j}{P} 
-                 &  &\ns\node{k}{\begin{tabular}[t]{@{}c@{}}NP\\
-                                 {}[+R] \end{tabular}}\\
-     &       &\node{l}{about} 
-                 &  &\node{m}{whom}}
-\nodeconnect{a}{b}         \nodeconnect{e}{f}
-\nodeconnect{a}{c}         \nodeconnect{i}{n}
-\nodeconnect{b}{d}         \nodeconnect{f}{j}
-\nodeconnect{b}{e}         \nodeconnect{f}{k}
-\nodeconnect{d}{h}         \nodeconnect{j}{l}
-\nodeconnect{e}{i}         \nodeconnect{k}{m}
-\nodetriangle{c}{g}
-{\makedash{4pt}
-\anodecurve[t]{b}[l]{a}{10pt}  \anodecurve[t]{f}[r]{e}{10pt}
-\anodecurve[t]{e}[r]{b}{10pt}  \anodecurve[t]{k}[r]{f}{10pt}
-}}
-\end{verbatim}
-
-
-\section{Errors}
-
-A multitude of caveats.
-\begin{itemize}
-  \item Any commands calling nodes must be read while \TeX\ is still
-processing the page the nodes are defined on. In other words don't
-define the nodes on page 1 and connect them with commands that appear
-at the end of the paper.
-
-\item Nodes mentioned in node connecting commands must exist or else
-      the job won't print.  
-
-\item Make sure the dvips postscript output is sent to a postscript
-printer.  It is possible to send the dvi, but not the postscript,
-output to another printer; the lines just won't appear, assuming the
-printer ignores specials it doesn't know about.
-
-
-\end{itemize}
-
-
-\end{document}
-
-
diff --git a/Master/texmf-dist/doc/latex/tree-dvips/tree.script b/Master/texmf-dist/doc/latex/tree-dvips/tree.script
deleted file mode 100644
index de7dca6ebbd..00000000000
--- a/Master/texmf-dist/doc/latex/tree-dvips/tree.script
+++ /dev/null
@@ -1,518 +0,0 @@
-% grestore
-% special commands for setting up tree macros
-TeXDict begin
-
-% the commands needed to get any of this working.  The first section
-% may need to be modified if different dvi to postscript programs are
-% used. 
-
-/@beginspec {gsave texpsmatrix setmatrix treedict begin} def
-/@endspec {end grestore} def
-
-%% definition of letter matrix
-%/testorient
-%  { gsave
-%    matrix defaultmatrix
-%    72 Resolution div dup neg 
-%    3 -1 roll scale          % set scaling to 1.
-%    310 -3005 
-%    3 -1 roll translate      % move origin to top (these are not exactly 1"
-%    Mtrx 
-%  } def
-%
-
-% /Landscape false def 
-
-% for landscape Landscape=true, letter Landscape=false
-/texpsmatrix 
-matrix defaultmatrix 
-isls {dup [0.0 -1.0 1.0 0.0 0.0 0.0] exch concatmatrix} if
-def
-userdict begin
-/bop-hook
-{/texpsmatrix 
-matrix defaultmatrix 
-isls {dup [0.0 -1.0 1.0 0.0 0.0 0.0] exch concatmatrix} if
-def}
-B
-end
-%/texpsmatrix matrix defaultmatrix def
-/treedict 200 dict def treedict begin
-
-%  num pt num  (converts a number in TeX pts (72.27 pts/in) to
-%  postscript pts (72pts/in)
-/pt {72 mul 72.07 div} def
-
-% end of first section
-
-% definition of a node as a box containing the following information
-% The x y location of the lower left hand corner of the box
-% the height of the box (h) 
-% the width of the box (w)
-% nodemargin is added to all sides to ensure a boundary around the box
-% str w h d node -
-% (nodemargin is defined in the TeX file)
-/nodemargin 2 def
-/nodes 100 dict def
-/node { /dpth exch def
-	       /hght exch def
-	       /wdth exch def
-       	       4 dict dup begin
-                 /x /y currentpoint 
-                       dpth sub nodemargin sub exch 3 1 roll def
-                    nodemargin sub def
-                 /h hght dpth add nodemargin dup add add def
-                 /w wdth nodemargin dup add add def
-               end nodes 3 1 roll put} def
-
-
-% commands to find various locations around the nodebox
-%
-%                 nodetopleft      nodetop    nodetopright
-%                           *--------*--------*
-%                           |                 |
-%                           |                 |
-%   farleft        nodeleft *  (nodebox)      * noderight    farright
-%                           |                 |
-%                           |                 |
-%                           *--------*--------*
-%                 nodebotleft     nodebottom  nodebotright
-%
-%
-%  farbotleft                     farbottom
-
-% all of these take
-% dict nodebottom x1 y1   [dict has x y h w defined]
-/nodebottom {begin 
-               	x w 2 div add y
-               	end} def
-/nodetop {begin
-            	x w 2 div add y h add
-            	end} def
-/nodeleft {begin
-             	x y h 2 div add
-            	end} def
-/noderight {begin
-              	x w add y h 2 div add
-              	end} def
-/nodetopleft {begin
-		x y h add
-		end} def
-/nodetopright {begin
-	 	x w add y h add
-		end} def
-/nodebottomleft {begin
-		x y
-		end} def
-/nodebottomright {begin
-		x w add y
-		end} def
-
-% some more locations of use
-/farright {begin
-		x w add depth add h 2 div y add
-	end} def
-
-/farleft {begin
-		x depth sub h 2 div y add
-	end} def
-
-/farbottom {begin
-		x w 2 div add y depth sub
-	end} def
-
-/fartop {begin
-		x w 2 div add y h add depth add
-	end} def
-
-/farbottomleft {begin
-                x depth 45 cos mul sub y depth 45 sin mul sub
-	end} def
-
-/farbottomright {begin
-                x w add depth 45 cos mul add y depth 45 sin mul sub
-	end} def
-
-/fartopright {begin
-                x w add depth 45 cos mul add y h add depth 45 sin mul add
-	end} def
-
-/fartopleft {begin
-                x depth 45 cos mul sub y h add depth 45 sin mul add
-	end} def
-
-
-% connects two nodes with a straight line 
-% add location information (e.g., whether to go from
-% nodetop to nodeleft ...
-
-% nodename1 loc1 nodename2 loc2 nodeconnect -
-% e.g., a nodetop b nodebottom nodeconnect
-
-% to see if straight lines are indeed straight
-% x1 x2 alignpoint x1' x2'  finds out if the two numbers are less than
-% one pixel apart if so make x1'=x2'
-
-/alignpoint {2 copy sub abs 1 le {add 2 div round dup} if} def
-
-% nodelocation nodename getnodepoint x y 
-/getnode {nodes exch get} def
-
-% xfrom yfrom xto yto nodeconnect -
-/nodeconnect {       gsave
-		       transform 4 2 roll
-                       transform
-		       exch 4 1 roll alignpoint
-                       4 2 roll alignpoint
-                       4 1 roll exch
-                       itransform moveto itransform lineto
-                       stroke
-                     grestore
-                     } def
-
-% arrowheads
-% xtail ytail xtip ytip headthickness headlength arrow -
-
-/arrowdict 14 dict def
-arrowdict begin
-	/mtrx matrix def
-end
-
-/arrow {arrowdict begin
-	/headlength exch def
-	/halfheadthickness exch 2 div def
-	/tipy exch def /tipx exch def
-	/taily exch def /tailx exch def
-
-	/dx tipx tailx sub def
-	/dy tipy taily sub def
-	/angle dy dx atan def
-	
-	/savematrix mtrx currentmatrix def
-	tipx tipy translate
-	angle rotate
-	0 0 moveto
-	headlength neg halfheadthickness neg lineto
-	headlength neg halfheadthickness lineto
-	closepath
-savematrix setmatrix
-	end } def
-
-
-% xfrom yfrom xto yto testcmd -
-% arrownodeconnect
-/arrownodeconnect{    gsave
-		transform 4 2 roll
-                transform
-		exch 4 1 roll alignpoint
-                4 2 roll alignpoint
-                4 1 roll exch
-                itransform 4 2 roll itransform 4 2 roll 4 copy moveto lineto
-		gsave
-		newpath
-		4 2 roll arrowwidth arrowlength arrow	
-		fill
-		grestore
-                stroke
-               grestore
-		} def
-
-
-% connecting with a bar like
-%     _______________
-%     |             |
-% or like
-%     _______________
-%     |             |
-%     |           node
-%    node
-
-% depth fromnode fromloc tonode toloc
-% depth x1 y1 x2 y2 barnodeconnect -
-/barnodeconnect {4 2 roll
-          2 copy moveto
-          5 -1 roll add
-          dup 3 1 roll
-          lineto
-          2 index exch
-          lineto lineto
-          stroke
-         } def
-
-/arrowbarnodeconnect {4 2 roll
-          2 copy moveto
-          5 -1 roll add
-          dup 3 1 roll
-          lineto
-          2 index exch
-          4 copy lineto lineto
-		gsave
-		newpath
-		4 2 roll
-		arrowwidth arrowlength arrow	
-		fill
-		grestore
-         stroke
-         } def
-
-
-% Takes two nodes and forms a triangle
-%         node1
-%         /\
-%        /  \
-%        ----
-%       nodess
-%
-% fromnodename tonodename nodetriangle -
-/nodetriangle {
-		gsave
-                        exch
-			nodes exch get nodebottom moveto
-			dup
-			nodes exch get nodetopleft lineto
-			nodes exch get nodetopright lineto
-			closepath
-			stroke
-		grestore } def
-
-
-% not sure what I am using the following for
-%  x y x y slope num
-/slope {/y1 exch def
-	/x1 exch def
-	/y0 exch def
-	/x0 exch def
-	y1 y0 sub x1 x0 sub div
-	} def
-
-% x y x y midpoint x y 
-/midpoint {/y1 exch def
-	   /x1 exch def
-	   /y0 exch def
-	   /x0 exch def
-	   x1 x0 sub abs
-	   x1 x0 ge {x0 add} {x1 add} ifelse
-	   y1 y0 sub abs
-	   y1 y0 ge {y0 add} {y1 add} ifelse
-	} def
-
-
-% variant of curveto where x1 y1 = x2 y2
-/tancurveto {1 index exch
-	curveto} def
-
-/nodetancurve {/depth exch def
-	    /to exch def
-	    /from exch def
-		gsave
-		nodes from get noderight moveto
-
-		nodes to get noderight 
-		tancurveto
-		stroke
-		grestore } def
-
-
-
-% the node curves draw curves between two points
-%
-%
-
-% nodename rightcur x1 y1 x2 y2
-/rightcur {nodes exch get dup noderight 3 -1 roll farright} def
-/leftcur {nodes exch get dup nodeleft 3 -1 roll farleft} def
-/topcur {nodes exch get dup nodetop 3 -1 roll fartop} def
-/bottomcur {nodes exch get dup nodebottom 3 -1 roll farbottom} def
-/topleftcur {nodes exch get dup nodetopleft 3 -1 roll fartopleft} def
-/toprightcur {nodes exch get dup nodetopright 3 -1 roll fartopright} def
-/bottomleftcur {nodes exch get dup nodebottomleft 3 -1 roll farbottomleft} def
-/bottomrightcur {nodes exch get dup nodebottomright 3 -1 roll farbottomright} def
-
-% (depth predefined) x1 y1 x2 y2 x3 y3 x4 y4 nodecurve -
-% where  nodename nodeposition produces x1 y1 x2 y2
-% where x1 y1 are the endpoint
-
-/nodecurve {gsave
-            4 2 roll moveto
-            6 2 roll 4 2 roll curveto 
-            stroke
-            grestore} def
-
-/arrownodecurve {gsave
-            4 2 roll moveto
-            6 2 roll 4 2 roll 4 copy 10 4 roll curveto 
-	    gsave
-	    newpath
-            arrowwidth arrowlength arrow
-            fill
-	    grestore
-            stroke
-            grestore} def
-
-
-%% commands for drawing things around nodes
-% nodename nodebox -
-/nodebox {nodes exch get begin
-                   gsave
-                     newpath
-                     x y moveto
-		     h w dobox
-		    cleanup
-	             stroke
-                   grestore
-                  end} def
-
-
-% nodename nodecircle -
-% would be nice to have a parameter that adjusts diameter of circle
-% depth nodename nodecircle -
-/nodecircle {nodes exch get begin
-		gsave
-		newpath
-		w 2 div x add h 2 div y add 
-		w w mul h h mul add sqrt 2 div 4 -1 roll add
-		360 0 arcn 
-		cleanup
-		stroke
-		grestore
-	    end} def
-
-% no cleanup
-/nodecircletrans {nodes exch get begin
-		gsave
-		newpath
-		w 2 div x add h 2 div y add 
-		w w mul h h mul add sqrt 2 div 4 -1 roll add
-		360 0 arcn 
-		stroke
-		grestore
-	    end} def
-
-% nodename nodeoval -
-/nodeoval {nodes exch get begin
-	gsave
-	newpath
-	x 2 sub y 2 sub moveto 
-	h 4 add w 4 add dooval
-	cleanup
-	stroke
-	grestore
-	end } def
-
-%  ratio depth nodename testnodeoval -
-%  ratio should be between 0 and 1
-/testnodeoval {nodes exch get begin
-	gsave
-	newpath
-        h h mul w w mul add sqrt div dup dup dup
-        w mul neg x add exch 
-        h mul neg y add 
-        moveto
-	dup
-        h mul 2 mul h add exch
-        w mul 2 mul w add  
-	testdooval
-	stroke
-	grestore
-	end } def
-
-
-/cleanup{gsave 
-	x y moveto
-	h nodemargin sub .5 add w nodemargin sub .5 add doccbox
-	1 setgray fill grestore
-}def
-
-/boxdict 4 dict def
-boxdict /mtrx matrix put
-
-/dobox{boxdict begin
-	/w exch def
-	/h exch def
-	/savematrix mtrx currentmatrix def
-	0 h rlineto
-        w 0 rlineto
-        0 h neg rlineto
-        closepath
-	savematrix setmatrix
-        end} def
-
-% do box in counterclockwise fashion
-/doccbox{boxdict begin
-	/w exch def
-	/h exch def
-	/savematrix mtrx currentmatrix def
-	w 0 rlineto
-	0 h rlineto
-	w neg 0 rlineto
-	closepath
-	savematrix setmatrix
-	end} def
-
-
-/ovaldict 6 dict def
-ovaldict /mtrx matrix put
-
-% h w ovaldict -
-/dooval{ovaldict begin
-	/w exch def
-	/h exch def
-	/savematrix mtrx currentmatrix def
-	0 h 2 div rmoveto
-	0 h 2 div nodemargin sub
-	nodemargin h 2 div
-	w 2 div h 2 div
-	rcurveto
-	w 2 div nodemargin sub 0
-        w 2 div nodemargin neg 
-	w 2 div h 2 div neg
-	rcurveto
-	0 h 2 div neg nodemargin add 
-	nodemargin neg h 2 div neg
-	w 2 div neg h 2 div neg
-	rcurveto
-	w 2 div neg nodemargin add 0
-	w 2 div neg nodemargin
-	w 2 div neg h 2 div 
-	rcurveto
-	savematrix setmatrix
-	end} def
-
-% give height and width of a box and the lower left hand point
-% produce a curve that will enclose the box.
-% initial point already defined
-% ratio h w testdooval -
-/testdooval{ovaldict begin
-	/w exch def
-	/h exch def
-	/r exch def
-	h 2 div neg r mul dup 
-        h 2 div dup 
-        r mul 3 1 roll 
-        2 r sub mul
-	0 h
-	rcurveto
-	w 2 div dup
-        r mul exch
-        2 r sub mul 
-        w 2 div r mul dup 3 1 roll
-        w 0
-	rcurveto
-	h 2 div r mul dup
-        h 2 div neg dup
-        r mul 3 1 roll
-        2 r sub mul
-        0 h neg
-	rcurveto
-        w 2 div neg dup
-        r mul exch
-        2 r sub mul 
-        w 2 div neg r mul dup 3 1 roll
-        w neg 0
-	rcurveto
-	end} def
-
-end % of treedict
-
-end % of TeXdict
-% gsave
diff --git a/Master/texmf-dist/dvips/tree-dvips/tree-dvips.pro b/Master/texmf-dist/dvips/tree-dvips/tree-dvips.pro
deleted file mode 100644
index 2ce5859c8f1..00000000000
--- a/Master/texmf-dist/dvips/tree-dvips/tree-dvips.pro
+++ /dev/null
@@ -1,85 +0,0 @@
-%!
-TeXDict begin /@beginspec{gsave texpsmatrix setmatrix treedict begin}def
-/@endspec{end grestore}def /texpsmatrix matrix defaultmatrix isls{dup[0.0 -1.0
-1.0 0.0 0.0 0.0]exch concatmatrix}if def userdict begin /bop-hook{
-/texpsmatrix matrix defaultmatrix isls{dup[0.0 -1.0 1.0 0.0 0.0 0.0]exch
-concatmatrix}if def}B end /treedict 200 dict def treedict begin /pt{72 mul
-72.07 div}def /nodemargin 2 def /nodes 100 dict def /node{/dpth exch def /hght
-exch def /wdth exch def 4 dict dup begin /x /y currentpoint dpth sub
-nodemargin sub exch 3 1 roll def nodemargin sub def /h hght dpth add
-nodemargin dup add add def /w wdth nodemargin dup add add def end nodes 3 1
-roll put}def /nodebottom{begin x w 2 div add y end}def /nodetop{begin x w 2
-div add y h add end}def /nodeleft{begin x y h 2 div add end}def /noderight{
-begin x w add y h 2 div add end}def /nodetopleft{begin x y h add end}def
-/nodetopright{begin x w add y h add end}def /nodebottomleft{begin x y end}def
-/nodebottomright{begin x w add y end}def /farright{begin x w add depth add h 2
-div y add end}def /farleft{begin x depth sub h 2 div y add end}def /farbottom{
-begin x w 2 div add y depth sub end}def /fartop{begin x w 2 div add y h add
-depth add end}def /farbottomleft{begin x depth 45 cos mul sub y depth 45 sin
-mul sub end}def /farbottomright{begin x w add depth 45 cos mul add y depth 45
-sin mul sub end}def /fartopright{begin x w add depth 45 cos mul add y h add
-depth 45 sin mul add end}def /fartopleft{begin x depth 45 cos mul sub y h add
-depth 45 sin mul add end}def /alignpoint{2 copy sub abs 1 le{add 2 div round
-dup}if}def /getnode{nodes exch get}def /nodeconnect{gsave transform 4 2 roll
-transform exch 4 1 roll alignpoint 4 2 roll alignpoint 4 1 roll exch
-itransform moveto itransform lineto stroke grestore}def /arrowdict 14 dict def
-arrowdict begin /mtrx matrix def end /arrow{arrowdict begin /headlength exch
-def /halfheadthickness exch 2 div def /tipy exch def /tipx exch def /taily
-exch def /tailx exch def /dx tipx tailx sub def /dy tipy taily sub def /angle
-dy dx atan def /savematrix mtrx currentmatrix def tipx tipy translate angle
-rotate 0 0 moveto headlength neg halfheadthickness neg lineto headlength neg
-halfheadthickness lineto closepath savematrix setmatrix end}def
-/arrownodeconnect{gsave transform 4 2 roll transform exch 4 1 roll alignpoint
-4 2 roll alignpoint 4 1 roll exch itransform 4 2 roll itransform 4 2 roll 4
-copy moveto lineto gsave newpath 4 2 roll arrowwidth arrowlength arrow fill
-grestore stroke grestore}def /barnodeconnect{4 2 roll 2 copy moveto 5 -1 roll
-add dup 3 1 roll lineto 2 index exch lineto lineto stroke}def
-/arrowbarnodeconnect{4 2 roll 2 copy moveto 5 -1 roll add dup 3 1 roll lineto
-2 index exch 4 copy lineto lineto gsave newpath 4 2 roll arrowwidth
-arrowlength arrow fill grestore stroke}def /nodetriangle{gsave exch nodes exch
-get nodebottom moveto dup nodes exch get nodetopleft lineto nodes exch get
-nodetopright lineto closepath stroke grestore}def /slope{/y1 exch def /x1 exch
-def /y0 exch def /x0 exch def y1 y0 sub x1 x0 sub div}def /midpoint{/y1 exch
-def /x1 exch def /y0 exch def /x0 exch def x1 x0 sub abs x1 x0 ge{x0 add}{x1
-add}ifelse y1 y0 sub abs y1 y0 ge{y0 add}{y1 add}ifelse}def /tancurveto{1
-index exch curveto}def /nodetancurve{/depth exch def /to exch def /from exch
-def gsave nodes from get noderight moveto nodes to get noderight tancurveto
-stroke grestore}def /rightcur{nodes exch get dup noderight 3 -1 roll farright}
-def /leftcur{nodes exch get dup nodeleft 3 -1 roll farleft}def /topcur{nodes
-exch get dup nodetop 3 -1 roll fartop}def /bottomcur{nodes exch get dup
-nodebottom 3 -1 roll farbottom}def /topleftcur{nodes exch get dup nodetopleft
-3 -1 roll fartopleft}def /toprightcur{nodes exch get dup nodetopright 3 -1
-roll fartopright}def /bottomleftcur{nodes exch get dup nodebottomleft 3 -1
-roll farbottomleft}def /bottomrightcur{nodes exch get dup nodebottomright 3 -1
-roll farbottomright}def /nodecurve{gsave 4 2 roll moveto 6 2 roll 4 2 roll
-curveto stroke grestore}def /arrownodecurve{gsave 4 2 roll moveto 6 2 roll 4 2
-roll 4 copy 10 4 roll curveto gsave newpath arrowwidth arrowlength arrow fill
-grestore stroke grestore}def /nodebox{nodes exch get begin gsave newpath x y
-moveto h w dobox cleanup stroke grestore end}def /nodecircle{nodes exch get
-begin gsave newpath w 2 div x add h 2 div y add w w mul h h mul add sqrt 2 div
-4 -1 roll add 360 0 arcn cleanup stroke grestore end}def /nodecircletrans{
-nodes exch get begin gsave newpath w 2 div x add h 2 div y add w w mul h h mul
-add sqrt 2 div 4 -1 roll add 360 0 arcn stroke grestore end}def /nodeoval{
-nodes exch get begin gsave newpath x 2 sub y 2 sub moveto h 4 add w 4 add
-dooval cleanup stroke grestore end}def /testnodeoval{nodes exch get begin
-gsave newpath h h mul w w mul add sqrt div dup dup dup w mul neg x add exch h
-mul neg y add moveto dup h mul 2 mul h add exch w mul 2 mul w add testdooval
-stroke grestore end}def /cleanup{gsave x y moveto h nodemargin sub .5 add w
-nodemargin sub .5 add doccbox 1 setgray fill grestore}def /boxdict 4 dict def
-boxdict /mtrx matrix put /dobox{boxdict begin /w exch def /h exch def
-/savematrix mtrx currentmatrix def 0 h rlineto w 0 rlineto 0 h neg rlineto
-closepath savematrix setmatrix end}def /doccbox{boxdict begin /w exch def /h
-exch def /savematrix mtrx currentmatrix def w 0 rlineto 0 h rlineto w neg 0
-rlineto closepath savematrix setmatrix end}def /ovaldict 6 dict def ovaldict
-/mtrx matrix put /dooval{ovaldict begin /w exch def /h exch def /savematrix
-mtrx currentmatrix def 0 h 2 div rmoveto 0 h 2 div nodemargin sub nodemargin h
-2 div w 2 div h 2 div rcurveto w 2 div nodemargin sub 0 w 2 div nodemargin neg
-w 2 div h 2 div neg rcurveto 0 h 2 div neg nodemargin add nodemargin neg h 2
-div neg w 2 div neg h 2 div neg rcurveto w 2 div neg nodemargin add 0 w 2 div
-neg nodemargin w 2 div neg h 2 div rcurveto savematrix setmatrix end}def
-/testdooval{ovaldict begin /w exch def /h exch def /r exch def h 2 div neg r
-mul dup h 2 div dup r mul 3 1 roll 2 r sub mul 0 h rcurveto w 2 div dup r mul
-exch 2 r sub mul w 2 div r mul dup 3 1 roll w 0 rcurveto h 2 div r mul dup h 2
-div neg dup r mul 3 1 roll 2 r sub mul 0 h neg rcurveto w 2 div neg dup r mul
-exch 2 r sub mul w 2 div neg r mul dup 3 1 roll w neg 0 rcurveto end}def end
-end
diff --git a/Master/texmf-dist/source/latex/tree-dvips/Makefile b/Master/texmf-dist/source/latex/tree-dvips/Makefile
deleted file mode 100644
index ab845d64274..00000000000
--- a/Master/texmf-dist/source/latex/tree-dvips/Makefile
+++ /dev/null
@@ -1,11 +0,0 @@
-
-ALL = Makefile lingmacros.sty tree-dvips.sty tree-manual.tex Readme \
-      tree-dvips.pro tree.script lingmacros-manual.tex
-
-all: tree-dvips.pro 
-
-tar: 
-	tar cf tree.tar ${ALL}
-
-tree-dvips.pro: tree.script
-	/src/tex/TeXdevices/dvips533/dvips/squeeze < tree.script > tree-dvips.pro
diff --git a/Master/texmf-dist/tex/latex/tree-dvips/lingmacros.sty b/Master/texmf-dist/tex/latex/tree-dvips/lingmacros.sty
deleted file mode 100644
index 133cfb8a21a..00000000000
--- a/Master/texmf-dist/tex/latex/tree-dvips/lingmacros.sty
+++ /dev/null
@@ -1,262 +0,0 @@
-% Lingmacros
-% include
-% \enumsentence, \eenumsentence, \ex
-% \smalltree
-% \shortex, \shortexnt (\shortexdt no longer needed)
-% \clap, \ollap, \orlap, \oclap on analogy with \rlap and \llap
-% \outerfs
-
-% this file created 1/23/89 by Emma Pease, CSLI
-% modified 4/1/91 by Emma Pease
-
-%Note (for those who use jbmacros):
-%  (a) the enumsentence macro is very similar to the \example command
-% in jbmacros; however, it does not have the annoying habit of leaving
-% the example number on one page and the example on the next (some
-% jbmacros don't have this problem). The eenumsentence macro is very
-% similar to the \examples macro.
-%  (b) \ex may be different
-
-% the enumsentence macro.
-%
-% \enumsentence{This is an example}
-% produces
-%  (1) This is an example
-% while
-% \enumsentence[(a)]{This is another example}
-% produces
-%  (a) This is another example
-% 
-% A related macros is 
-% \eenumsentence{\item[a.] A third example
-%                  \item[b.] A fourth example}
-% which produces
-%  (2) a. A third example
-%      b. A fourth example
-% 
-% other macro is \ex{1} which produces the number of the following
-% enumsentence (\ex{0} produces number of preceeding enumsentence and
-% so on.)
-% 
-% The standard \label command also works within \enumsentence and
-% \eenumsentence. 
-%
-% the \enumsentence counter.  Add [chapter] if using report style
-\newcounter{enums}
-
-% \widelabel is defined for use when the width of the enumsentence or
-% eenumsentence number is wider than 20pt (default labelwidth).  As a
-% rule of thumb if your enumerated sentences are only 1 or 2 digit
-% you don't need to worry.  At 3 digits, set \widelabel to 2.78pt at 4
-% digits set to 7.78pt.
-
-\newdimen\widelabel
-\widelabel=0pt
-
-
-\def\enumsentence{\@ifnextchar[{\@enumsentence}% %]
-{\refstepcounter{enums}\@enumsentence[(\theenums)]}}
-
-\long\def\@enumsentence[#1]#2{\begin{list}{}{%
-\advance\leftmargin by\widelabel \advance\labelwidth by \widelabel}
-\item[#1] #2
-\end{list}}
-
-% The \ex definition
-\newcounter{tempcnt}
-
-\newcommand{\ex}[1]{\setcounter{tempcnt}{\value{enums}}%
-\addtocounter{tempcnt}{#1}%
-\arabic{tempcnt}}
-
-% modified \@item command \unhbox\@tempboxa replaces \makelabel{#1}
-% Used to get \eenumsentence to work correctly
-\def\@item[#1]{\if@noparitem \@donoparitem
-  \else \if@inlabel \indent \par \fi
-         \ifhmode \unskip\unskip \par \fi 
-         \if@newlist \if@nobreak \@nbitem \else
-                        \addpenalty\@beginparpenalty
-                        \addvspace\@topsep \addvspace{-\parskip}\fi
-           \else \addpenalty\@itempenalty \addvspace\itemsep 
-          \fi 
-    \global\@inlabeltrue 
-\fi
-\everypar{\global\@minipagefalse\global\@newlistfalse 
-          \if@inlabel\global\@inlabelfalse \hskip -\parindent \box\@labels
-             \penalty\z@ \fi
-          \everypar{}}\global\@nobreakfalse
-\if@noitemarg \@noitemargfalse \if@nmbrlist \refstepcounter{\@listctr}\fi \fi
-\setbox\@tempboxa\hbox{\makelabel{#1}}%
-\global\setbox\@labels
- \hbox{\unhbox\@labels \hskip \itemindent
-       \hskip -\labelwidth \hskip -\labelsep 
-       \ifdim \wd\@tempboxa >\labelwidth 
-                \box\@tempboxa
-          \else \hbox to\labelwidth {\unhbox\@tempboxa}\fi
-       \hskip \labelsep}\ignorespaces}
-
-% for enumerated enumsentences. Internal enumeration is alpha if not
-% otherwise defined.  
-
-% counter for items within \eenumsentence. (might use enumi instead?)
-\newcounter{enumsi}
-
-% \eenumsentence{\item[a.] A third \label{bar}example \toplabel{foo}
-%                  \item[b.] A fourth \label{baz}example}
-% Testing references \ref{foo}, \ref{bar}, and \ref{baz}.
-% which produces
-%  (3) a. A third example
-%      b. A fourth example
-% Testing references 3, 3a, and 3b.
-
-% To ensure that labels in \eenumsentence come out right.
-%
-\def\theenumsi{\theenums\alph{enumsi}}
-\newdimen\eeindent
-\eeindent=15pt
-% changes \leftmargin increased by \eeindent
-%         \labelwidth increased by \eeindent
-% .. .. .leftmargin.. .. .. .. ..
-% oldlabelwidth eeindent labelsep actual entry
-%     20pt      15pt      5pt
-% (enumlabel)   eelabel
-%               eelabel 
-
-\def\@mklab#1{\hfil#1}
-\def\enummklab#1{\hfil(\eelabel)\hbox to \eeindent{\hfil#1}}
-\def\enummakelabel#1{\enummklab{#1}\global\let\makelabel=\@mklab}
-\def\toplabel#1{{\edef\@currentlabel{\p@enums\theenums}\label{#1}}}
-
-\def\eenumsentence{\@ifnextchar[{\@eenumsentence}% %]
-{\refstepcounter{enums}\@eenumsentence[\theenums]}}
-
-\long\def\@eenumsentence[#1]#2{\def\eelabel{#1}\let\holdlabel\makelabel%
-\begin{list}{\alph{enumsi}.}{\usecounter{enumsi}%
-\advance\leftmargin by \eeindent \advance\leftmargin by \widelabel%
-\advance\labelwidth by \eeindent \advance\labelwidth by \widelabel%
-\let\makelabel=\enummakelabel}
-#2
-\end{list}\let\makelabel\holdlabel}
-
-%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%
-% smalltree
-% use
-% \smalltree{& &a\\ 
-%            &b& &c\\ 
-%           d& &e& &f}
-% produces
-%          a
-%        b   c
-%      d   e   f
-
-
-\long\def\smalltree#1{\leavevmode{\def\\{\cr\noalign{\vskip12pt}}%
-\def\mc##1##2{\multispan{##1}{\hfil##2\hfil}}%
-\tabskip=1em%
-\hbox{\vtop{\halign{&\hfil##\hfil\cr
-#1\crcr}}}}}
-
-% modsmalltree
-% use 
-% \modsmalltree{3}{&&a\\ &b&&c\\ d&&e&&f}
-% and produces the same output
-% \mc{n}{item} within either will produce item centered across n
-% number of columns
-% \modsmalltree[arraystretch]{num of cols}{argument}
-%
-\def\modsmalltree{\@ifnextchar[{\@modsmalltree}{\@modsmalltree[2]}}
-
-\long\def\@modsmalltree[#1]#2#3{{\def\mc##1##2{%
-\multicolumn{##1}{c}{\def\arraystretch{1}##2}}%
-\def\arraystretch{#1}%
-\def\ns{\def\arraystretch{1}}%
-\setbox0=\hbox{\begin{tabular}[t]{@{}*{#2}{c}@{}}
-#3
-\end{tabular}}%
-\dimen0=\ht0
-\advance\dimen0 by -\arraystretch \ht\strutbox
-\advance\dimen0 by \ht\strutbox
-\ht0=\dimen0
-\dimen0=\dp0
-\advance\dimen0 by -\arraystretch \dp\strutbox
-\advance\dimen0 by \dp\strutbox
-\dp0=\dimen0
-\leavevmode\box0}}
-
-% center lap creates a box of 0 width centered on the point
-\def\clap#1{\hbox to 0pt{\hss#1\hss}}
-%The first argument in both of these commands is the distance above the
-%baseline desired.  The second is what is the actual text.
-% over right lap
-\def\orlap#1#2{\vbox to0pt{\vss\hbox to 0pt{#2\hss}\hbox{\vrule height#1
-width0pt depth0pt}}}
-% over left lap
-\def\ollap#1#2{\vbox to0pt{\vss\hbox to 0pt{\hss#2}\hbox{\vrule height#1
-width0pt depth0pt}}}
-% over center lap
-\def\oclap#1#2{\vbox to0pt{\vss\hbox to 0pt{\hss#2\hss}\hbox{\vrule height#1
-width0pt depth0pt}}}
-
-
-%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%
-% need to be modified?
-
-%  Format
-% \shortex{4}{a & b & c & d}
-%            {z & y & x & w}
-%            {mnop}
-% produces
-%   a  b  c  d
-%   z  y  x  w
-%   mnop
-%
-%  \shortexdt  takes two gloss lines
-%  \shortexnt takes no gloss lines
-
-\def\shortex#1#2#3#4{\begin{tabular}[t]{@{}*{#1}{l@{\ }}}
-#2\\ #3\\ \multicolumn{#1}{@{}l@{}}{\parbox{\linewidth}{#4}}
-\end{tabular}}
-
-%\def\shortexdt#1#2#3#4#5{\begin{tabular}[t]{@{}*{#1}{l@{\ }}}
-%#2\\ #3\\ \multicolumn{#1}{@{}l@{}}{#4}\\
-%\multicolumn{#1}{@{}l@{}}{#5}
-%\end{tabular}}
-
-\def\shortexnt#1#2#3{\begin{tabular}[t]{@{}*{#1}{l@{\ }}}
-#2\\ #3
-\end{tabular}}
-
-
-%%%%%%%%%%%%%%%%%%%%%%%%%%%%
-% need to create equivalent of AVM structures.
-
-% Structure is 
-% \outerfs{alpha & beta\\ gamma & delta}
-% produces
-% __              __
-% | alpha    beta  |
-% | gamma    delta |
-% --              --
-% 
-% \outerfs can be nested.
-% inside of enumsentence use with \evnup[2pt]{\outerfs{. . .}}
-% to ensure that top of fs structure lines up with the number
-%
-%  Note that you can use \\[1ex] to increase the space between
-%  individual lines
-
-\def\outerfs#1{$\left[\begin{tabular}{ll}#1\end{tabular}\right]$}
-
-% \evnup is used to line up the enumsentence number and an entry along
-% the top.  It can take an argument to improve lining up.
-\def\evnup{\@ifnextchar[{\@evnup}{\@evnup[0pt]}}
-
-\def\@evnup[#1]#2{\setbox1=\hbox{#2}%
-\dimen1=\ht1 \advance\dimen1 by -.5\baselineskip%
-\advance\dimen1 by -#1%
-\leavevmode\lower\dimen1\box1}
-
-
-%%%%%%%%%%%%%%%%%%%%%%%%%%%%
-%%   End of main lingmacros
-%
diff --git a/Master/texmf-dist/tex/latex/tree-dvips/tree-dvips.sty b/Master/texmf-dist/tex/latex/tree-dvips/tree-dvips.sty
deleted file mode 100644
index fdd4ad67741..00000000000
--- a/Master/texmf-dist/tex/latex/tree-dvips/tree-dvips.sty
+++ /dev/null
@@ -1,162 +0,0 @@
-% how to run.
-% \input tree.sty or \documentstyle[tree]{..}
-% run through latex as you normally do
-% remember to send it to a postscript printer
-
-
-\special{header=tree-dvips.pro}
-
-
-\def\pscmd#1{\special{ps:@beginspec
-/nodemargin \@int{\the\nodemargin}\space pt def %
-\@int{\the\treelinewidth}\space pt setlinewidth %
-\ifdim\dashlength=0pt [] 0 setdash%
-/arrowwidth \@int{\the\arrowwidth}\space pt def %
-/arrowlength \@int{\the\arrowlength}\space pt def %
-\else [\@int{\the\dashlength}\space pt] 0 setdash \fi\space
-#1 %
-@endspec}}
-
-% parameters in tree mode
-\newdimen\nodemargin % 
-\nodemargin=2pt
-\newdimen\treelinewidth
-\treelinewidth=.3pt
-
-\def\thinline{\treelinewidth=.3pt}
-
-\newdimen\dashlength
-
-% \makedash{dimen}  makes dashes of dimen length if dimen = 0pt then 
-% solid line
-\def\makedash#1{\dashlength=#1}
-
-\newdimen\arrowwidth
-\arrowwidth 4pt
-\newdimen\arrowlength
-\arrowlength 4pt
-
-{\catcode`p=12 \catcode`t=12 \gdef\wnum#1pt{#1}}
-\def\@int#1{\expandafter\wnum#1}
-
-\def\node#1#2{\leavevmode
-              \setbox1=\hbox{#2}\pscmd{/#1 \@int{\the\wd1} \space pt
-                                           \@int{\the\ht1} \space pt
-                                           \@int{\the\dp1} \space pt
-                                       node}\box1\relax}           
-
-
-% A node of 0pt width and height
-% \nodepoint{nodename}[horizontal displacement][vertical displacement]
-% default is current point
-\def\nodepoint#1{\@ifnextchar [{\@nodepoint{#1}}{\@nodepoint{#1}[0pt][0pt]}}
-
-\def\@nodepoint#1[#2][#3]{{\@tempdima=#2 \@tempdimb=#3%
-\pscmd{/nodemargin 0 def %
-/#1 \@int{\the\@tempdima}\space pt \@int{\the\@tempdimb}\space pt %
-rmoveto 0 0 0 node}}}
-
-\newtoks\pos@t   \pos@t={top}    
-\newtoks\pos@b   \pos@b={bottom} 
-\newtoks\pos@l   \pos@l={left}   
-\newtoks\pos@r   \pos@r={right}  
-\newtoks\pos@tl   \pos@tl={topleft}    
-\newtoks\pos@tr   \pos@tr={topright}   
-\newtoks\pos@bl   \pos@bl={bottomleft} 
-\newtoks\pos@br   \pos@br={bottomright}  
-
-
-% \nodeconnect[fromloc]{fromnode}[toloc]{tonode}
-\def\nodeconnect{\@ifnextchar [{\@nodeconnect}{\@nodeconnect[b]}}
-\def\@nodeconnect[#1]#2{\@ifnextchar [{\@@nodeconnect[#1]{#2}}{\@@nodeconnect[#1]{#2}[t]}}
-
-\def\@@nodeconnect[#1]#2[#3]#4{\pscmd{%
-/#2 getnode node\the\csname pos@#1\endcsname \space%
-/#4 getnode node\the\csname pos@#3\endcsname\space nodeconnect}}
-
-% \anodeconnect[fromloc]{fromnode}[toloc]{tonode}
-\def\anodeconnect{\@ifnextchar [{\@anodeconnect}{\@anodeconnect[b]}}
-\def\@anodeconnect[#1]#2{\@ifnextchar [{\@@anodeconnect[#1]{#2}}{\@@anodeconnect[#1]{#2}[t]}}
-
-\def\@@anodeconnect[#1]#2[#3]#4{\pscmd{%
-/#2 getnode node\the\csname pos@#1\endcsname \space%
-/#4 getnode node\the\csname pos@#3\endcsname\space arrownodeconnect}}
-
-
-% \nodecurve[fromloc]{fromnode}[toloc]{tonode}{depthfrom}[depthto]
-
-\def\nodecurve{\@ifnextchar [{\@nodecurve}{\@nodecurve[b]}}
-\def\@nodecurve[#1]#2{\@ifnextchar [{\@@nodecurve[#1]{#2}}{\@@nodecurve[#1]{#2}[t]}}
-
-\def\@@nodecurve[#1]#2[#3]#4#5{\@ifnextchar [{\@@@nodecurve[#1]{#2}[#3]{#4}{#5}}%
-{\@@@nodecurve[#1]{#2}[#3]{#4}{#5}[#5]}}
-
-\def\@@@nodecurve[#1]#2[#3]#4#5[#6]{\@tempdima=#5%
-\@tempdimb=#6%
-\pscmd{/depth \@int{\the\@tempdimb} \space pt def %
- /#4 \the\csname pos@#3\endcsname cur\space %
- /depth \@int{\the\@tempdima} \space pt def %
- /#2 \the\csname pos@#1\endcsname cur\space %
-nodecurve}}
-
-% \anodecurve[fromloc]{fromnode}[toloc]{tonode}{depth}
-
-\def\anodecurve{\@ifnextchar [{\@anodecurve}{\@anodecurve[b]}}
-\def\@anodecurve[#1]#2{\@ifnextchar [{\@@anodecurve[#1]{#2}}{\@@anodecurve[#1]{#2}[t]}}
-
-
-\def\@@anodecurve[#1]#2[#3]#4#5{\@ifnextchar [{\@@@anodecurve[#1]{#2}[#3]{#4}{#5}}%
-{\@@@anodecurve[#1]{#2}[#3]{#4}{#5}[#5]}}
-
-
-\def\@@@anodecurve[#1]#2[#3]#4#5[#6]{\@tempdima=#5%
-\@tempdimb=#6%
-\pscmd{/depth \@int{\the\@tempdimb} \space pt def %
- /#4 \the\csname pos@#3\endcsname cur\space %
- /depth \@int{\the\@tempdima} \space pt def %
- /#2 \the\csname pos@#1\endcsname cur\space %
-arrownodecurve}}
-
-
-% above is well tested below is not
-\newif\iftransparent
-
-\def\nodebox#1{\pscmd{/#1 nodebox}}
-\def\nodeoval#1{\pscmd{/#1 nodeoval}}
-\def\nodetriangle#1#2{\pscmd{/#1 /#2 nodetriangle}}
-
-% \nodecircle[depth]{nodename}
-
-\def\nodecircle{\@ifnextchar [ {\@nodecircle}{\@nodecircle[0pt]}}
-
-\def\@nodecircle[#1]#2{\@tempdima=#1%
-\iftransparent
-\pscmd{\@int{\the\@tempdima}\space pt /#2 nodecircletrans}
-\else
-\pscmd{\@int{\the\@tempdima}\space pt /#2 nodecircle}\fi}
-
-
-% \barnodeconnect[depth]{fromnode}{tonode}
-\def\barnodeconnect{\@ifnextchar[ {\@barnodeconnect}{\@barnodeconnect[5pt]}}
-
-\def\@barnodeconnect[#1]#2#3{\@tempdima=#1 \ifdim\@tempdima<0pt
-\pscmd{\@int{\the\@tempdima}\space pt %
-/#2  getnode nodebottom /#3 getnode nodebottom barnodeconnect}
-\else
-\pscmd{\@int{\the\@tempdima}\space pt %
-/#2  getnode nodetop /#3 getnode nodetop barnodeconnect}
-\fi}
-
-\def\abarnodeconnect{\@ifnextchar[ {\@abarnodeconnect}{\@abarnodeconnect[5pt]}}
-
-\def\@abarnodeconnect[#1]#2#3{\@tempdima=#1 \ifdim\@tempdima<0pt
-\pscmd{\@int{\the\@tempdima}\space pt %
-/#2  getnode nodebottom /#3 getnode nodebottom arrowbarnodeconnect}
-% above replaces the line below.
-% /#2  getnode nodebottom /#3 getnode nodebottom abarnodeconnect}
-\else
-\pscmd{\@int{\the\@tempdima}\space pt %
-/#2  getnode nodetop /#3 getnode nodetop arrowbarnodeconnect}
-\fi}
-
-
diff --git a/Master/tlpkg/bin/tlpkg-ctan-check b/Master/tlpkg/bin/tlpkg-ctan-check
index 9791ea056c0..dcc5c288dba 100755
--- a/Master/tlpkg/bin/tlpkg-ctan-check
+++ b/Master/tlpkg/bin/tlpkg-ctan-check
@@ -329,7 +329,7 @@ my @TLP_working = qw(
     tkz-doc tkz-linknodes tkz-orm tkz-tab
     tocbibind tocloft tocvsec2 todo todonotes
     tokenizer toolbox tools topfloat totcount totpages
-    trajan tree-dvips trfsigns trimspaces trivfloat trsym truncate
+    trajan trfsigns trimspaces trivfloat trsym truncate
     tucv tufte-latex tugboat tugboat-plain turkmen turnstile
     twoinone twoup txfonts
     txfontsb type1cm typehtml typogrid
diff --git a/Master/tlpkg/libexec/ctan2tds b/Master/tlpkg/libexec/ctan2tds
index 408a6df88ea..bb9fb48f3fd 100755
--- a/Master/tlpkg/libexec/ctan2tds
+++ b/Master/tlpkg/libexec/ctan2tds
@@ -724,6 +724,7 @@ $Master = "$mydir/../..";
  'translation-footmisc-de',	"die 'skipping, nocommercial'",
  'translation-pst-jtree-de',	"die 'skipping, nocommercial'",
  'translator',	"die 'skipping, now part of beamer'",
+ 'tree-dvips',	"die 'skipping, noinfo license, latex 2.09'",
  'turkishintro',"die 'skipping, nosource'",
  'turnstile',	"&MAKEflatten",
  'tpx',		"die 'skipping, nosource, Windows'",
diff --git a/Master/tlpkg/tlpsrc/collection-humanities.tlpsrc b/Master/tlpkg/tlpsrc/collection-humanities.tlpsrc
index f299780f291..031c680a1f3 100644
--- a/Master/tlpkg/tlpsrc/collection-humanities.tlpsrc
+++ b/Master/tlpkg/tlpsrc/collection-humanities.tlpsrc
@@ -31,7 +31,6 @@ depend rtklage
 depend screenplay
 depend sides
 depend stage
-depend tree-dvips
 depend verse
 depend xyling
 depend collection-latex
diff --git a/Master/tlpkg/tlpsrc/tree-dvips.tlpsrc b/Master/tlpkg/tlpsrc/tree-dvips.tlpsrc
deleted file mode 100644
index e69de29bb2d..00000000000
--- a/Master/tlpkg/tlpsrc/tree-dvips.tlpsrc
+++ /dev/null