Win32 tlperl JSON support

git-svn-id: svn://tug.org/texlive/trunk@45596 c570f23f-e606-0410-a88d-b1316a301751

25 files changed, 7730 insertions, 0 deletions

diff --git a/Master/source/tlperl/Canary-Stability-2012.tar.gz b/Master/source/tlperl/Canary-Stability-2012.tar.gz
new file mode 100644
index 00000000000..01d2c7209db
--- /dev/null
+++ b/Master/source/tlperl/Canary-Stability-2012.tar.gz
diff --git a/Master/source/tlperl/JSON-2.94.tar.gz b/Master/source/tlperl/JSON-2.94.tar.gz
new file mode 100644
index 00000000000..97e70802533
--- /dev/null
+++ b/Master/source/tlperl/JSON-2.94.tar.gz
diff --git a/Master/source/tlperl/JSON-XS-3.04.tar.gz b/Master/source/tlperl/JSON-XS-3.04.tar.gz
new file mode 100644
index 00000000000..a2b56b2f69f
--- /dev/null
+++ b/Master/source/tlperl/JSON-XS-3.04.tar.gz
diff --git a/Master/source/tlperl/Types-Serialiser-1.0.tar.gz b/Master/source/tlperl/Types-Serialiser-1.0.tar.gz
new file mode 100644
index 00000000000..cf51068e1be
--- /dev/null
+++ b/Master/source/tlperl/Types-Serialiser-1.0.tar.gz
diff --git a/Master/source/tlperl/common-sense-3.74.tar.gz b/Master/source/tlperl/common-sense-3.74.tar.gz
new file mode 100644
index 00000000000..46b6f965167
--- /dev/null
+++ b/Master/source/tlperl/common-sense-3.74.tar.gz
diff --git a/Master/source/tlperl/tlperl.README b/Master/source/tlperl/tlperl.README
index da4b332acd1..5dfce7c5a38 100644
--- a/Master/source/tlperl/tlperl.README
+++ b/Master/source/tlperl/tlperl.README
@@ -134,6 +134,17 @@ This module did not compile rightaway:
 
 Tk-DirSelect 1.12
 
+JSON support, added october 25 2017:
+
+JSON 2.94
+Canary::Stability 2012
+common::sense 3.74
+Types::Serialiser 1.0
+JSON::XS 3.04
+
+I temporarily added pl2bat.[bin|pl] to tlperl/bin/ because dmake test
+required it for one of these modules.
+
 MODIFICATIONS FOR TEXLIVE
 
 - As explained above: our versions of lib/Config.pm and lib/Config_heavy.pl
diff --git a/Master/tlpkg/tlperl/lib/perllocal.pod b/Master/tlpkg/tlperl/lib/perllocal.pod
index 67d5c91c465..2520a5dcf31 100644
--- a/Master/tlpkg/tlperl/lib/perllocal.pod
+++ b/Master/tlpkg/tlperl/lib/perllocal.pod
@@ -768,3 +768,113 @@ C<EXE_FILES: >
 

 =back

 

+=head2 Tue Oct 24 21:29:33 2017: C<Module> L<JSON|JSON>

+

+=over 4

+

+=item *

+

+C<installed into: c:\tlperl\site\lib>

+

+=item *

+

+C<LINKTYPE: dynamic>

+

+=item *

+

+C<VERSION: 2.94>

+

+=item *

+

+C<EXE_FILES: >

+

+=back

+

+=head2 Tue Oct 24 21:38:19 2017: C<Module> L<Canary::Stability|Canary::Stability>

+

+=over 4

+

+=item *

+

+C<installed into: c:\tlperl\site\lib>

+

+=item *

+

+C<LINKTYPE: dynamic>

+

+=item *

+

+C<VERSION: 2012>

+

+=item *

+

+C<EXE_FILES: >

+

+=back

+

+=head2 Tue Oct 24 21:54:47 2017: C<Module> L<common::sense|common::sense>

+

+=over 4

+

+=item *

+

+C<installed into: c:\tlperl\site\lib>

+

+=item *

+

+C<LINKTYPE: dynamic>

+

+=item *

+

+C<VERSION: 3.74>

+

+=item *

+

+C<EXE_FILES: >

+

+=back

+

+=head2 Tue Oct 24 22:18:00 2017: C<Module> L<Types::Serialiser|Types::Serialiser>

+

+=over 4

+

+=item *

+

+C<installed into: c:\tlperl\site\lib>

+

+=item *

+

+C<LINKTYPE: dynamic>

+

+=item *

+

+C<VERSION: 1.0>

+

+=item *

+

+C<EXE_FILES: >

+

+=back

+

+=head2 Tue Oct 24 22:19:46 2017: C<Module> L<JSON::XS|JSON::XS>

+

+=over 4

+

+=item *

+

+C<installed into: c:\tlperl\site\lib>

+

+=item *

+

+C<LINKTYPE: dynamic>

+

+=item *

+

+C<VERSION: 3.04>

+

+=item *

+

+C<EXE_FILES: bin/json_xs>

+

+=back

+

diff --git a/Master/tlpkg/tlperl/site/lib/Canary/Stability.pm b/Master/tlpkg/tlperl/site/lib/Canary/Stability.pm
new file mode 100644
index 00000000000..21d7c659736
--- /dev/null
+++ b/Master/tlpkg/tlperl/site/lib/Canary/Stability.pm
@@ -0,0 +1,207 @@
+=head1 NAME
+
+Canary::Stability - canary to check perl compatibility for schmorp's modules
+
+=head1 SYNOPSIS
+
+ # in Makefile.PL
+ use Canary::Stability DISTNAME => 2001, MINIMUM_PERL_VERSION;
+
+=head1 DESCRIPTION
+
+This module is used by Schmorp's modules during configuration stage to
+test the installed perl for compatibility with his modules.
+
+It's not, at this stage, meant as a tool for other module authors,
+although in principle nothing prevents them from subscribing to the same
+ideas.
+
+See the F<Makefile.PL> in L<Coro> or L<AnyEvent> for usage examples.
+
+=cut
+
+package Canary::Stability;
+
+BEGIN {
+   $VERSION = 2012;
+}
+
+sub sgr {
+   # we just assume ANSI almost everywhere
+   # red 31, yellow 33, green 32
+   local $| = 1;
+
+   $ENV{PERL_CANARY_STABILITY_COLOUR} ne 0
+   and ((-t STDOUT and length $ENV{TERM}) or $ENV{PERL_CANARY_STABILITY_COLOUR})
+   and print "\e[$_[0]m";
+}
+
+sub import {
+   my (undef, $distname, $minvers, $minperl) = @_;
+
+   $ENV{PERL_CANARY_STABILITY_DISABLE}
+      and return;
+
+   $minperl ||= 5.008002;
+
+   print <<EOF;
+
+***
+*** Canary::Stability COMPATIBILITY AND SUPPORT CHECK
+*** =================================================
+***
+*** Hi!
+***
+*** I do my best to provide predictable and reliable software.
+***
+*** However, in recent releases, P5P (who maintain perl) have been
+*** introducing regressions that are sometimes subtle and at other times
+*** catastrophic, often for personal preferences with little or no concern
+*** for existing code, most notably CPAN.
+***
+*** For this reason, it has become very hard for me to maintain the level
+*** of reliability and support I have committed myself to in the past, at
+*** least with some perl versions: I simply can't keep up working around new
+*** bugs or gratituous incompatibilities, and in turn you might suffer from
+*** unanticipated problems.
+***
+*** Therefore I have introduced a support and compatibility check, the results
+*** of which follow below, together with a FAQ and some recommendations.
+***
+*** This check is just to let you know that there might be a risk, so you can
+*** make judgement calls on how to proceed - it will not keep the module from
+*** installing or working.
+***
+EOF
+
+   if ($minvers > $VERSION) {
+      sgr 33;
+      print <<EOF;
+*** The stability canary says: (nothing, it died of old age).
+***
+*** Your Canary::Stability module (used by $distname) is too old.
+*** This is not a fatal problem - while you might want to upgrade to version
+*** $minvers (currently installed version: $VERSION) to get better support
+*** status testing, you might also not want to care at all, and all will
+*** be well as long $distname works well enough for you, as the stability
+*** canary is only used when installing the distribution.
+EOF
+   } elsif ($] < $minperl) {
+
+      sgr 33;
+      print <<EOF;
+*** The stability canary says: chirp (it seems concerned about something).
+***
+*** Your perl version ($]) is older than the $distname distribution
+*** likes ($minperl). This is not a fatal problem - the module might work
+*** well with your version of perl, but it does mean the author likely
+*** won't do anything to make it work if it breaks.
+EOF
+   } elsif (defined $Internals::StabilityBranchVersion) {
+      # note to people studying this modules sources:
+      # the above test is not considered a clean or stable way to
+      # test for the stability branch.
+
+      sgr 32;
+      print <<EOF;
+*** The stability canary says: chirp! chirp! (it seems to be quite excited)
+***
+*** It seems you are running schmorp's stability branch of perl.
+*** All should be well, and if it isn't, you should report this as a bug
+*** to the $distname author.
+EOF
+   } elsif ($] < 5.021) {
+      #sgr 32;
+      print <<EOF;
+*** The stability canary says: chirp! chirp! (it seems to be quite happy)
+***
+*** Your version of perl ($]) is quite supported by $distname, nothing
+*** else to be said, hope it comes in handy.
+EOF
+   } else {
+      sgr 31;
+      print <<EOF;
+*** The stability canary says: (nothing, it was driven away by harsh weather)
+***
+*** It seems you are running perl version $], likely the "official" or
+*** "standard" version. While there is nothing wrong with doing that,
+*** standard perl versions 5.022 and up are not supported by $distname.
+*** While this might be fatal, it might also be all right - if you run into
+*** problems, you might want to downgrade your perl or switch to the
+*** stability branch.
+***
+*** If everything works fine, you can ignore this message.
+EOF
+      sgr 0;
+      print <<EOF;
+***
+*** Stability canary mini-FAQ:
+***
+*** Do I need to do anything?
+***    With luck, no. While some distributions are known to fail
+***    already, most should probably work. This message is here
+***    to alert you that your perl is not supported by $distname,
+***    and if things go wrong, you either need to downgrade, or
+***    sidegrade to the stability variant of your perl version,
+***    or simply live with the consequences.
+***
+*** What is this canary thing?
+***    It's purpose is to check support status of $distname with
+***    respect to your perl version.
+***
+*** What is this "stability branch"?
+***    It's a branch or fork of the official perl, by schmorp, to
+***    improve stability and compatibility with existing modules.
+***
+*** How can I skip this prompt on automated installs?
+***    Set PERL_CANARY_STABILITY_NOPROMPT=1 in your environment.
+***    More info is in the Canary::Stability manpage.
+***
+*** Long version of this FAQ: http://stableperl.schmorp.de/faq.html
+*** Stability Branch homepage: http://stableperl.schmorp.de/
+***
+
+EOF
+
+      unless ($ENV{PERL_CANARY_STABILITY_NOPROMPT}) {
+         require ExtUtils::MakeMaker;
+
+         ExtUtils::MakeMaker::prompt ("Continue anyways? ", "y") =~ /^y/i
+            or die "FATAL: User aborted configuration of $distname.\n";
+      }
+   }
+
+   sgr 0;
+}
+
+=head1 ENVIRONMENT VARIABLES
+
+=over 4
+
+=item C<PERL_CANARY_STABILITY_NOPROMPT=1>
+
+Do not prompt the user on alert messages.
+
+=item C<PERL_CANARY_STABILITY_COLOUR=0>
+
+Disable use of colour.
+
+=item C<PERL_CANARY_STABILITY_COLOUR=1>
+
+Force use of colour.
+
+=item C<PERL_CANARY_STABILITY_DISABLE=1>
+
+Disable this modules functionality completely.
+
+=back
+
+=head1 AUTHOR
+
+ Marc Lehmann <schmorp@schmorp.de>
+ http://software.schmorp.de/pkg/Canary-Stability.html
+
+=cut
+
+1
+
diff --git a/Master/tlpkg/tlperl/site/lib/JSON.pm b/Master/tlpkg/tlperl/site/lib/JSON.pm
new file mode 100644
index 00000000000..9170fa6925c
--- /dev/null
+++ b/Master/tlpkg/tlperl/site/lib/JSON.pm
@@ -0,0 +1,1659 @@
+package JSON;
+
+
+use strict;
+use Carp ();
+use Exporter;
+BEGIN { @JSON::ISA = 'Exporter' }
+
+@JSON::EXPORT = qw(from_json to_json jsonToObj objToJson encode_json decode_json);
+
+BEGIN {
+    $JSON::VERSION = '2.94';
+    $JSON::DEBUG   = 0 unless (defined $JSON::DEBUG);
+    $JSON::DEBUG   = $ENV{ PERL_JSON_DEBUG } if exists $ENV{ PERL_JSON_DEBUG };
+}
+
+my %RequiredVersion = (
+    'JSON::PP' => '2.27203',
+    'JSON::XS' => '2.34',
+);
+
+# XS and PP common methods
+
+my @PublicMethods = qw/
+    ascii latin1 utf8 pretty indent space_before space_after relaxed canonical allow_nonref 
+    allow_blessed convert_blessed filter_json_object filter_json_single_key_object 
+    shrink max_depth max_size encode decode decode_prefix allow_unknown
+/;
+
+my @Properties = qw/
+    ascii latin1 utf8 indent space_before space_after relaxed canonical allow_nonref
+    allow_blessed convert_blessed shrink max_depth max_size allow_unknown
+/;
+
+my @XSOnlyMethods = qw/allow_tags/; # Currently nothing
+
+my @PPOnlyMethods = qw/
+    indent_length sort_by
+    allow_singlequote allow_bignum loose allow_barekey escape_slash as_nonblessed
+/; # JSON::PP specific
+
+
+# used in _load_xs and _load_pp ($INSTALL_ONLY is not used currently)
+my $_INSTALL_DONT_DIE  = 1; # When _load_xs fails to load XS, don't die.
+my $_ALLOW_UNSUPPORTED = 0;
+my $_UNIV_CONV_BLESSED = 0;
+
+
+# Check the environment variable to decide worker module. 
+
+unless ($JSON::Backend) {
+    $JSON::DEBUG and  Carp::carp("Check used worker module...");
+
+    my $backend = exists $ENV{PERL_JSON_BACKEND} ? $ENV{PERL_JSON_BACKEND} : 1;
+
+    if ($backend eq '1') {
+        $backend = 'JSON::XS,JSON::PP';
+    }
+    elsif ($backend eq '0') {
+        $backend = 'JSON::PP';
+    }
+    elsif ($backend eq '2') {
+        $backend = 'JSON::XS';
+    }
+    $backend =~ s/\s+//g;
+
+    my @backend_modules = split /,/, $backend;
+    while(my $module = shift @backend_modules) {
+        if ($module =~ /JSON::XS/) {
+            _load_xs($module, @backend_modules ? $_INSTALL_DONT_DIE : 0);
+        }
+        elsif ($module =~ /JSON::PP/) {
+            _load_pp($module);
+        }
+        elsif ($module =~ /JSON::backportPP/) {
+            _load_pp($module);
+        }
+        else {
+            Carp::croak "The value of environmental variable 'PERL_JSON_BACKEND' is invalid.";
+        }
+        last if $JSON::Backend;
+    }
+}
+
+
+sub import {
+    my $pkg = shift;
+    my @what_to_export;
+    my $no_export;
+
+    for my $tag (@_) {
+        if ($tag eq '-support_by_pp') {
+            if (!$_ALLOW_UNSUPPORTED++) {
+                JSON::Backend::XS
+                    ->support_by_pp(@PPOnlyMethods) if ($JSON::Backend->is_xs);
+            }
+            next;
+        }
+        elsif ($tag eq '-no_export') {
+            $no_export++, next;
+        }
+        elsif ( $tag eq '-convert_blessed_universally' ) {
+            my $org_encode = $JSON::Backend->can('encode');
+            eval q|
+                require B;
+                local $^W;
+                no strict 'refs';
+                *{"${JSON::Backend}\::encode"} = sub {
+                    # only works with Perl 5.18+
+                    local *UNIVERSAL::TO_JSON = sub {
+                        my $b_obj = B::svref_2object( $_[0] );
+                        return    $b_obj->isa('B::HV') ? { %{ $_[0] } }
+                                : $b_obj->isa('B::AV') ? [ @{ $_[0] } ]
+                                : undef
+                                ;
+                    };
+                    $org_encode->(@_);
+                };
+            | if ( !$_UNIV_CONV_BLESSED++ );
+            next;
+        }
+        push @what_to_export, $tag;
+    }
+
+    return if ($no_export);
+
+    __PACKAGE__->export_to_level(1, $pkg, @what_to_export);
+}
+
+
+# OBSOLETED
+
+sub jsonToObj {
+    my $alternative = 'from_json';
+    if (defined $_[0] and UNIVERSAL::isa($_[0], 'JSON')) {
+        shift @_; $alternative = 'decode';
+    }
+    Carp::carp "'jsonToObj' will be obsoleted. Please use '$alternative' instead.";
+    return JSON::from_json(@_);
+};
+
+sub objToJson {
+    my $alternative = 'to_json';
+    if (defined $_[0] and UNIVERSAL::isa($_[0], 'JSON')) {
+        shift @_; $alternative = 'encode';
+    }
+    Carp::carp "'objToJson' will be obsoleted. Please use '$alternative' instead.";
+    JSON::to_json(@_);
+};
+
+
+# INTERFACES
+
+sub to_json ($@) {
+    if (
+        ref($_[0]) eq 'JSON'
+        or (@_ > 2 and $_[0] eq 'JSON')
+    ) {
+        Carp::croak "to_json should not be called as a method.";
+    }
+    my $json = JSON->new;
+
+    if (@_ == 2 and ref $_[1] eq 'HASH') {
+        my $opt  = $_[1];
+        for my $method (keys %$opt) {
+            $json->$method( $opt->{$method} );
+        }
+    }
+
+    $json->encode($_[0]);
+}
+
+
+sub from_json ($@) {
+    if ( ref($_[0]) eq 'JSON' or $_[0] eq 'JSON' ) {
+        Carp::croak "from_json should not be called as a method.";
+    }
+    my $json = JSON->new;
+
+    if (@_ == 2 and ref $_[1] eq 'HASH') {
+        my $opt  = $_[1];
+        for my $method (keys %$opt) {
+            $json->$method( $opt->{$method} );
+        }
+    }
+
+    return $json->decode( $_[0] );
+}
+
+
+
+sub true  { $JSON::true  }
+
+sub false { $JSON::false }
+
+sub null  { undef; }
+
+
+sub require_xs_version { $RequiredVersion{'JSON::XS'}; }
+
+sub backend {
+    my $proto = shift;
+    $JSON::Backend;
+}
+
+#*module = *backend;
+
+
+sub is_xs {
+    return $_[0]->backend->is_xs;
+}
+
+
+sub is_pp {
+    return $_[0]->backend->is_pp;
+}
+
+
+sub pureperl_only_methods { @PPOnlyMethods; }
+
+
+sub property {
+    my ($self, $name, $value) = @_;
+
+    if (@_ == 1) {
+        my %props;
+        for $name (@Properties) {
+            my $method = 'get_' . $name;
+            if ($name eq 'max_size') {
+                my $value = $self->$method();
+                $props{$name} = $value == 1 ? 0 : $value;
+                next;
+            }
+            $props{$name} = $self->$method();
+        }
+        return \%props;
+    }
+    elsif (@_ > 3) {
+        Carp::croak('property() can take only the option within 2 arguments.');
+    }
+    elsif (@_ == 2) {
+        if ( my $method = $self->can('get_' . $name) ) {
+            if ($name eq 'max_size') {
+                my $value = $self->$method();
+                return $value == 1 ? 0 : $value;
+            }
+            $self->$method();
+        }
+    }
+    else {
+        $self->$name($value);
+    }
+
+}
+
+
+
+# INTERNAL
+
+sub __load_xs {
+    my ($module, $opt) = @_;
+
+    $JSON::DEBUG and Carp::carp "Load $module.";
+    my $required_version = $RequiredVersion{$module} || '';
+
+    eval qq|
+        use $module $required_version ();
+    |;
+
+    if ($@) {
+        if (defined $opt and $opt & $_INSTALL_DONT_DIE) {
+            $JSON::DEBUG and Carp::carp "Can't load $module...($@)";
+            return 0;
+        }
+        Carp::croak $@;
+    }
+    $JSON::BackendModuleXS = $module;
+    return 1;
+}
+
+sub _load_xs {
+    my ($module, $opt) = @_;
+    __load_xs($module, $opt) or return;
+
+    my $data = join("", <DATA>); # this code is from Jcode 2.xx.
+    close(DATA);
+    eval $data;
+    JSON::Backend::XS->init($module);
+
+    return 1;
+};
+
+
+sub __load_pp {
+    my ($module, $opt) = @_;
+
+    $JSON::DEBUG and Carp::carp "Load $module.";
+    my $required_version = $RequiredVersion{$module} || '';
+
+    eval qq| use $module $required_version () |;
+
+    if ($@) {
+        if ( $module eq 'JSON::PP' ) {
+            $JSON::DEBUG and Carp::carp "Can't load $module ($@), so try to load JSON::backportPP";
+            $module = 'JSON::backportPP';
+            local $^W; # if PP installed but invalid version, backportPP redefines methods.
+            eval qq| require $module |;
+        }
+        Carp::croak $@ if $@;
+    }
+    $JSON::BackendModulePP = $module;
+    return 1;
+}
+
+sub _load_pp {
+    my ($module, $opt) = @_;
+    __load_pp($module, $opt);
+
+    JSON::Backend::PP->init($module);
+};
+
+#
+# Helper classes for Backend Module (PP)
+#
+
+package JSON::Backend::PP;
+
+sub init {
+    my ($class, $module) = @_;
+
+    # name may vary, but the module should (always) be a JSON::PP
+
+    local $^W;
+    no strict qw(refs); # this routine may be called after JSON::Backend::XS init was called.
+    *{"JSON::decode_json"} = \&{"JSON::PP::decode_json"};
+    *{"JSON::encode_json"} = \&{"JSON::PP::encode_json"};
+    *{"JSON::is_bool"} = \&{"JSON::PP::is_bool"};
+
+    $JSON::true  = ${"JSON::PP::true"};
+    $JSON::false = ${"JSON::PP::false"};
+
+    push @JSON::Backend::PP::ISA, 'JSON::PP';
+    push @JSON::ISA, $class;
+    $JSON::Backend = $class;
+    $JSON::BackendModule = $module;
+    ${"$class\::VERSION"} = $module->VERSION;
+
+    for my $method (@XSOnlyMethods) {
+        *{"JSON::$method"} = sub {
+            Carp::carp("$method is not supported in $module.");
+            $_[0];
+        };
+    }
+
+    return 1;
+}
+
+sub is_xs { 0 };
+sub is_pp { 1 };
+
+#
+# To save memory, the below lines are read only when XS backend is used.
+#
+
+package JSON;
+
+1;
+__DATA__
+
+
+#
+# Helper classes for Backend Module (XS)
+#
+
+package JSON::Backend::XS;
+
+sub init {
+    my ($class, $module) = @_;
+
+    local $^W;
+    no strict qw(refs);
+    *{"JSON::decode_json"} = \&{"$module\::decode_json"};
+    *{"JSON::encode_json"} = \&{"$module\::encode_json"};
+    *{"JSON::is_bool"} = \&{"$module\::is_bool"};
+
+    $JSON::true  = ${"$module\::true"};
+    $JSON::false = ${"$module\::false"};
+
+    push @JSON::Backend::XS::ISA, $module;
+    push @JSON::ISA, $class;
+    $JSON::Backend = $class;
+    $JSON::BackendModule = $module;
+    ${"$class\::VERSION"} = $module->VERSION;
+
+    if ( $module->VERSION < 3 ) {
+        eval 'package JSON::PP::Boolean';
+        push @{"$module\::Boolean::ISA"}, qw(JSON::PP::Boolean);
+    }
+
+    for my $method (@PPOnlyMethods) {
+        *{"JSON::$method"} = sub {
+            Carp::carp("$method is not supported in $module.");
+            $_[0];
+        };
+    }
+
+    return 1;
+}
+
+sub is_xs { 1 };
+sub is_pp { 0 };
+
+sub support_by_pp {
+    my ($class, @methods) = @_;
+
+    JSON::__load_pp('JSON::PP');
+
+    local $^W;
+    no strict qw(refs);
+
+    for my $method (@methods) {
+        my $pp_method = JSON::PP->can($method) or next;
+        *{"JSON::$method"} = sub {
+            if (!$_[0]->isa('JSON::PP')) {
+                my $xs_self = $_[0];
+                my $pp_self = JSON::PP->new;
+                for (@Properties) {
+                     my $getter = "get_$_";
+                    $pp_self->$_($xs_self->$getter);
+                }
+                $_[0] = $pp_self;
+            }
+            $pp_method->(@_);
+        };
+    }
+
+    $JSON::DEBUG and Carp::carp("set -support_by_pp mode.");
+}
+
+1;
+__END__
+
+=head1 NAME
+
+JSON - JSON (JavaScript Object Notation) encoder/decoder
+
+=head1 SYNOPSIS
+
+ use JSON; # imports encode_json, decode_json, to_json and from_json.
+ 
+ # simple and fast interfaces (expect/generate UTF-8)
+ 
+ $utf8_encoded_json_text = encode_json $perl_hash_or_arrayref;
+ $perl_hash_or_arrayref  = decode_json $utf8_encoded_json_text;
+ 
+ # OO-interface
+ 
+ $json = JSON->new->allow_nonref;
+ 
+ $json_text   = $json->encode( $perl_scalar );
+ $perl_scalar = $json->decode( $json_text );
+ 
+ $pretty_printed = $json->pretty->encode( $perl_scalar ); # pretty-printing
+
+=head1 VERSION
+
+    2.93
+
+=head1 DESCRIPTION
+
+This module is a thin wrapper for L<JSON::XS>-compatible modules with a few
+additional features. All the backend modules convert a Perl data structure
+to a JSON text as of RFC4627 (which we know is obsolete but we still stick
+to; see below for an option to support part of RFC7159) and vice versa.
+This module uses L<JSON::XS> by default, and when JSON::XS is not available,
+this module falls back on L<JSON::PP>, which is in the Perl core since 5.14.
+If JSON::PP is not available either, this module then falls back on
+JSON::backportPP (which is actually JSON::PP in a different .pm file)
+bundled in the same distribution as this module. You can also explicitly
+specify to use L<Cpanel::JSON::XS>, a fork of JSON::XS by Reini Urban.
+
+All these backend modules have slight incompatibilities between them,
+including extra features that other modules don't support, but as long as you
+use only common features (most important ones are described below), migration
+from backend to backend should be reasonably easy. For details, see each
+backend module you use.
+
+=head1 CHOOSING BACKEND
+
+This module respects an environmental variable called C<PERL_JSON_BACKEND>
+when it decides a backend module to use. If this environmental variable is
+not set, it tries to load JSON::XS, and if JSON::XS is not available, it
+falls back on JSON::PP, and then JSON::backportPP if JSON::PP is not available
+either.
+
+If you always don't want it to fall back on pure perl modules, set the
+variable like this (C<export> may be C<setenv>, C<set> and the likes,
+depending on your environment):
+
+  > export PERL_JSON_BACKEND=JSON::XS
+
+If you prefer Cpanel::JSON::XS to JSON::XS, then:
+
+  > export PERL_JSON_BACKEND=Cpanel::JSON::XS,JSON::XS,JSON::PP
+
+You may also want to set this variable at the top of your test files, in order
+not to be bothered with incompatibilities between backends (you need to wrap
+this in C<BEGIN>, and set before actually C<use>-ing JSON module, as it decides
+its backend as soon as it's loaded):
+
+  BEGIN { $ENV{PERL_JSON_BACKEND}='JSON::backportPP'; }
+  use JSON;
+
+=head1 USING OPTIONAL FEATURES
+
+There are a few options you can set when you C<use> this module:
+
+=over
+
+=item -support_by_pp
+
+   BEGIN { $ENV{PERL_JSON_BACKEND} = 'JSON::XS' }
+   
+   use JSON -support_by_pp;
+   
+   my $json = JSON->new;
+   # escape_slash is for JSON::PP only.
+   $json->allow_nonref->escape_slash->encode("/");
+
+With this option, this module loads its pure perl backend along with
+its XS backend (if available), and lets the XS backend to watch if you set
+a flag only JSON::PP supports. When you do, the internal JSON::XS object
+is replaced with a newly created JSON::PP object with the setting copied
+from the XS object, so that you can use JSON::PP flags (and its slower
+C<decode>/C<encode> methods) from then on. In other words, this is not
+something that allows you to hook JSON::XS to change its behavior while
+keeping its speed. JSON::XS and JSON::PP objects are quite different
+(JSON::XS object is a blessed scalar reference, while JSON::PP object is
+a blessed hash reference), and can't share their internals.
+
+To avoid needless overhead (by copying settings), you are advised not
+to use this option and just to use JSON::PP explicitly when you need
+JSON::PP features.
+
+=item -convert_blessed_universally
+
+   use JSON -convert_blessed_universally;
+
+   my $json = JSON->new->allow_nonref->convert_blessed;
+   my $object = bless {foo => 'bar'}, 'Foo';
+   $json->encode($object); # => {"foo":"bar"}
+
+JSON::XS-compatible backend modules don't encode blessed objects by
+default (except for their boolean values, which are typically blessed
+JSON::PP::Boolean objects). If you need to encode a data structure
+that may contain objects, you usually need to look into the structure
+and replace objects with alternative non-blessed values, or enable
+C<convert_blessed> and provide a C<TO_JSON> method for each object's
+(base) class that may be found in the structure, in order to let the
+methods replace the objects with whatever scalar values the methods
+return.
+
+If you need to serialise data structures that may contain arbitrary
+objects, it's probably better to use other serialisers (such as
+L<Sereal> or L<Storable> for example), but if you do want to use
+this module for that purpose, C<-convert_blessed_universally> option
+may help, which tweaks C<encode> method of the backend to install
+C<UNIVERSAL::TO_JSON> method (locally) before encoding, so that
+all the objects that don't have their own C<TO_JSON> method can
+fall back on the method in the C<UNIVERSAL> namespace. Note that you
+still need to enable C<convert_blessed> flag to actually encode
+objects in a data structure, and C<UNIVERSAL::TO_JSON> method
+installed by this option only converts blessed hash/array references
+into their unblessed clone (including private keys/values that are
+not supposed to be exposed). Other blessed references will be
+converted into null.
+
+This feature is experimental and may be removed in the future.
+
+=item -no_export
+
+When you don't want to import functional interfaces from a module, you
+usually supply C<()> to its C<use> statement.
+
+    use JSON (); # no functional interfaces
+
+If you don't want to import functional interfaces, but you also want to
+use any of the above options, add C<-no_export> to the option list.
+
+   # no functional interfaces, while JSON::PP support is enabled.
+   use JSON -support_by_pp, -no_export;
+
+=back
+
+=head1 FUNCTIONAL INTERFACE
+
+This section is taken from JSON::XS. C<encode_json> and C<decode_json>
+are exported by default.
+
+This module also exports C<to_json> and C<from_json> for backward
+compatibility. These are slower, and may expect/generate different stuff
+from what C<encode_json> and C<decode_json> do, depending on their
+options. It's better just to use Object-Oriented interfaces than using
+these two functions.
+
+=head2 encode_json
+
+    $json_text = encode_json $perl_scalar
+
+Converts the given Perl data structure to a UTF-8 encoded, binary string
+(that is, the string contains octets only). Croaks on error.
+
+This function call is functionally identical to:
+
+    $json_text = JSON->new->utf8->encode($perl_scalar)
+
+Except being faster.
+
+=head2 decode_json
+
+    $perl_scalar = decode_json $json_text
+
+The opposite of C<encode_json>: expects an UTF-8 (binary) string and tries
+to parse that as an UTF-8 encoded JSON text, returning the resulting
+reference. Croaks on error.
+
+This function call is functionally identical to:
+
+    $perl_scalar = JSON->new->utf8->decode($json_text)
+
+Except being faster.
+
+=head2 to_json
+
+   $json_text = to_json($perl_scalar[, $optional_hashref])
+
+Converts the given Perl data structure to a Unicode string by default.
+Croaks on error.
+
+Basically, this function call is functionally identical to:
+
+   $json_text = JSON->new->encode($perl_scalar)
+
+Except being slower.
+
+You can pass an optional hash reference to modify its behavior, but
+that may change what C<to_json> expects/generates (see
+C<ENCODING/CODESET FLAG NOTES> for details).
+
+   $json_text = to_json($perl_scalar, {utf8 => 1, pretty => 1})
+   # => JSON->new->utf8(1)->pretty(1)->encode($perl_scalar)
+
+=head2 from_json
+
+   $perl_scalar = from_json($json_text[, $optional_hashref])
+
+The opposite of C<to_json>: expects a Unicode string and tries
+to parse it, returning the resulting reference. Croaks on error.
+
+Basically, this function call is functionally identical to:
+
+    $perl_scalar = JSON->new->decode($json_text)
+
+You can pass an optional hash reference to modify its behavior, but
+that may change what C<from_json> expects/generates (see
+C<ENCODING/CODESET FLAG NOTES> for details).
+
+    $perl_scalar = from_json($json_text, {utf8 => 1})
+    # => JSON->new->utf8(1)->decode($json_text)
+
+=head2 JSON::is_bool
+
+    $is_boolean = JSON::is_bool($scalar)
+
+Returns true if the passed scalar represents either JSON::true or
+JSON::false, two constants that act like C<1> and C<0> respectively
+and are also used to represent JSON C<true> and C<false> in Perl strings.
+
+See L<MAPPING>, below, for more information on how JSON values are mapped to
+Perl.
+
+=head1 COMMON OBJECT-ORIENTED INTERFACE
+
+This section is also taken from JSON::XS.
+
+The object oriented interface lets you configure your own encoding or
+decoding style, within the limits of supported formats.
+
+=head2 new
+
+    $json = JSON->new
+
+Creates a new JSON::XS-compatible backend object that can be used to de/encode JSON
+strings. All boolean flags described below are by default I<disabled>.
+
+The mutators for flags all return the backend object again and thus calls can
+be chained:
+
+   my $json = JSON->new->utf8->space_after->encode({a => [1,2]})
+   => {"a": [1, 2]}
+
+=head2 ascii
+
+    $json = $json->ascii([$enable])
+    
+    $enabled = $json->get_ascii
+
+If C<$enable> is true (or missing), then the C<encode> method will not
+generate characters outside the code range C<0..127> (which is ASCII). Any
+Unicode characters outside that range will be escaped using either a
+single \uXXXX (BMP characters) or a double \uHHHH\uLLLLL escape sequence,
+as per RFC4627. The resulting encoded JSON text can be treated as a native
+Unicode string, an ascii-encoded, latin1-encoded or UTF-8 encoded string,
+or any other superset of ASCII.
+
+If C<$enable> is false, then the C<encode> method will not escape Unicode
+characters unless required by the JSON syntax or other flags. This results
+in a faster and more compact format.
+
+See also the section I<ENCODING/CODESET FLAG NOTES> later in this document.
+
+The main use for this flag is to produce JSON texts that can be
+transmitted over a 7-bit channel, as the encoded JSON texts will not
+contain any 8 bit characters.
+
+  JSON->new->ascii(1)->encode([chr 0x10401])
+  => ["\ud801\udc01"]
+
+=head2 latin1
+
+    $json = $json->latin1([$enable])
+    
+    $enabled = $json->get_latin1
+
+If C<$enable> is true (or missing), then the C<encode> method will encode
+the resulting JSON text as latin1 (or iso-8859-1), escaping any characters
+outside the code range C<0..255>. The resulting string can be treated as a
+latin1-encoded JSON text or a native Unicode string. The C<decode> method
+will not be affected in any way by this flag, as C<decode> by default
+expects Unicode, which is a strict superset of latin1.
+
+If C<$enable> is false, then the C<encode> method will not escape Unicode
+characters unless required by the JSON syntax or other flags.
+
+See also the section I<ENCODING/CODESET FLAG NOTES> later in this document.
+
+The main use for this flag is efficiently encoding binary data as JSON
+text, as most octets will not be escaped, resulting in a smaller encoded
+size. The disadvantage is that the resulting JSON text is encoded
+in latin1 (and must correctly be treated as such when storing and
+transferring), a rare encoding for JSON. It is therefore most useful when
+you want to store data structures known to contain binary data efficiently
+in files or databases, not when talking to other JSON encoders/decoders.
+
+  JSON->new->latin1->encode (["\x{89}\x{abc}"]
+  => ["\x{89}\\u0abc"]    # (perl syntax, U+abc escaped, U+89 not)
+
+=head2 utf8
+
+    $json = $json->utf8([$enable])
+    
+    $enabled = $json->get_utf8
+
+If C<$enable> is true (or missing), then the C<encode> method will encode
+the JSON result into UTF-8, as required by many protocols, while the
+C<decode> method expects to be handled an UTF-8-encoded string.  Please
+note that UTF-8-encoded strings do not contain any characters outside the
+range C<0..255>, they are thus useful for bytewise/binary I/O. In future
+versions, enabling this option might enable autodetection of the UTF-16
+and UTF-32 encoding families, as described in RFC4627.
+
+If C<$enable> is false, then the C<encode> method will return the JSON
+string as a (non-encoded) Unicode string, while C<decode> expects thus a
+Unicode string.  Any decoding or encoding (e.g. to UTF-8 or UTF-16) needs
+to be done yourself, e.g. using the Encode module.
+
+See also the section I<ENCODING/CODESET FLAG NOTES> later in this document.
+
+Example, output UTF-16BE-encoded JSON:
+
+  use Encode;
+  $jsontext = encode "UTF-16BE", JSON->new->encode ($object);
+
+Example, decode UTF-32LE-encoded JSON:
+
+  use Encode;
+  $object = JSON->new->decode (decode "UTF-32LE", $jsontext);
+
+=head2 pretty
+
+    $json = $json->pretty([$enable])
+
+This enables (or disables) all of the C<indent>, C<space_before> and
+C<space_after> (and in the future possibly more) flags in one call to
+generate the most readable (or most compact) form possible.
+
+=head2 indent
+
+    $json = $json->indent([$enable])
+    
+    $enabled = $json->get_indent
+
+If C<$enable> is true (or missing), then the C<encode> method will use a multiline
+format as output, putting every array member or object/hash key-value pair
+into its own line, indenting them properly.
+
+If C<$enable> is false, no newlines or indenting will be produced, and the
+resulting JSON text is guaranteed not to contain any C<newlines>.
+
+This setting has no effect when decoding JSON texts.
+
+=head2 space_before
+
+    $json = $json->space_before([$enable])
+    
+    $enabled = $json->get_space_before
+
+If C<$enable> is true (or missing), then the C<encode> method will add an extra
+optional space before the C<:> separating keys from values in JSON objects.
+
+If C<$enable> is false, then the C<encode> method will not add any extra
+space at those places.
+
+This setting has no effect when decoding JSON texts. You will also
+most likely combine this setting with C<space_after>.
+
+Example, space_before enabled, space_after and indent disabled:
+
+   {"key" :"value"}
+
+=head2 space_after
+
+    $json = $json->space_after([$enable])
+    
+    $enabled = $json->get_space_after
+
+If C<$enable> is true (or missing), then the C<encode> method will add an extra
+optional space after the C<:> separating keys from values in JSON objects
+and extra whitespace after the C<,> separating key-value pairs and array
+members.
+
+If C<$enable> is false, then the C<encode> method will not add any extra
+space at those places.
+
+This setting has no effect when decoding JSON texts.
+
+Example, space_before and indent disabled, space_after enabled:
+
+   {"key": "value"}
+
+=head2 relaxed
+
+    $json = $json->relaxed([$enable])
+    
+    $enabled = $json->get_relaxed
+
+If C<$enable> is true (or missing), then C<decode> will accept some
+extensions to normal JSON syntax (see below). C<encode> will not be
+affected in anyway. I<Be aware that this option makes you accept invalid
+JSON texts as if they were valid!>. I suggest only to use this option to
+parse application-specific files written by humans (configuration files,
+resource files etc.)
+
+If C<$enable> is false (the default), then C<decode> will only accept
+valid JSON texts.
+
+Currently accepted extensions are:
+
+=over 4
+
+=item * list items can have an end-comma
+
+JSON I<separates> array elements and key-value pairs with commas. This
+can be annoying if you write JSON texts manually and want to be able to
+quickly append elements, so this extension accepts comma at the end of
+such items not just between them:
+
+   [
+      1,
+      2, <- this comma not normally allowed
+   ]
+   {
+      "k1": "v1",
+      "k2": "v2", <- this comma not normally allowed
+   }
+
+=item * shell-style '#'-comments
+
+Whenever JSON allows whitespace, shell-style comments are additionally
+allowed. They are terminated by the first carriage-return or line-feed
+character, after which more white-space and comments are allowed.
+
+  [
+     1, # this comment not allowed in JSON
+        # neither this one...
+  ]
+
+=back
+
+=head2 canonical
+
+    $json = $json->canonical([$enable])
+    
+    $enabled = $json->get_canonical
+
+If C<$enable> is true (or missing), then the C<encode> method will output JSON objects
+by sorting their keys. This is adding a comparatively high overhead.
+
+If C<$enable> is false, then the C<encode> method will output key-value
+pairs in the order Perl stores them (which will likely change between runs
+of the same script, and can change even within the same run from 5.18
+onwards).
+
+This option is useful if you want the same data structure to be encoded as
+the same JSON text (given the same overall settings). If it is disabled,
+the same hash might be encoded differently even if contains the same data,
+as key-value pairs have no inherent ordering in Perl.
+
+This setting has no effect when decoding JSON texts.
+
+This setting has currently no effect on tied hashes.
+
+=head2 allow_nonref
+
+    $json = $json->allow_nonref([$enable])
+    
+    $enabled = $json->get_allow_nonref
+
+If C<$enable> is true (or missing), then the C<encode> method can convert a
+non-reference into its corresponding string, number or null JSON value,
+which is an extension to RFC4627. Likewise, C<decode> will accept those JSON
+values instead of croaking.
+
+If C<$enable> is false, then the C<encode> method will croak if it isn't
+passed an arrayref or hashref, as JSON texts must either be an object
+or array. Likewise, C<decode> will croak if given something that is not a
+JSON object or array.
+
+Example, encode a Perl scalar as JSON value with enabled C<allow_nonref>,
+resulting in an invalid JSON text:
+
+   JSON->new->allow_nonref->encode ("Hello, World!")
+   => "Hello, World!"
+
+=head2 allow_unknown
+
+    $json = $json->allow_unknown ([$enable])
+    
+    $enabled = $json->get_allow_unknown
+
+If C<$enable> is true (or missing), then C<encode> will I<not> throw an
+exception when it encounters values it cannot represent in JSON (for
+example, filehandles) but instead will encode a JSON C<null> value. Note
+that blessed objects are not included here and are handled separately by
+c<allow_nonref>.
+
+If C<$enable> is false (the default), then C<encode> will throw an
+exception when it encounters anything it cannot encode as JSON.
+
+This option does not affect C<decode> in any way, and it is recommended to
+leave it off unless you know your communications partner.
+
+=head2 allow_blessed
+
+    $json = $json->allow_blessed([$enable])
+    
+    $enabled = $json->get_allow_blessed
+
+See L<OBJECT SERIALISATION> for details.
+
+If C<$enable> is true (or missing), then the C<encode> method will not
+barf when it encounters a blessed reference that it cannot convert
+otherwise. Instead, a JSON C<null> value is encoded instead of the object.
+
+If C<$enable> is false (the default), then C<encode> will throw an
+exception when it encounters a blessed object that it cannot convert
+otherwise.
+
+This setting has no effect on C<decode>.
+
+=head2 convert_blessed
+
+    $json = $json->convert_blessed([$enable])
+    
+    $enabled = $json->get_convert_blessed
+
+See L<OBJECT SERIALISATION> for details.
+
+If C<$enable> is true (or missing), then C<encode>, upon encountering a
+blessed object, will check for the availability of the C<TO_JSON> method
+on the object's class. If found, it will be called in scalar context and
+the resulting scalar will be encoded instead of the object.
+
+The C<TO_JSON> method may safely call die if it wants. If C<TO_JSON>
+returns other blessed objects, those will be handled in the same
+way. C<TO_JSON> must take care of not causing an endless recursion cycle
+(== crash) in this case. The name of C<TO_JSON> was chosen because other
+methods called by the Perl core (== not by the user of the object) are
+usually in upper case letters and to avoid collisions with any C<to_json>
+function or method.
+
+If C<$enable> is false (the default), then C<encode> will not consider
+this type of conversion.
+
+This setting has no effect on C<decode>.
+
+=head2 filter_json_object
+
+    $json = $json->filter_json_object([$coderef])
+
+When C<$coderef> is specified, it will be called from C<decode> each
+time it decodes a JSON object. The only argument is a reference to the
+newly-created hash. If the code references returns a single scalar (which
+need not be a reference), this value (i.e. a copy of that scalar to avoid
+aliasing) is inserted into the deserialised data structure. If it returns
+an empty list (NOTE: I<not> C<undef>, which is a valid scalar), the
+original deserialised hash will be inserted. This setting can slow down
+decoding considerably.
+
+When C<$coderef> is omitted or undefined, any existing callback will
+be removed and C<decode> will not change the deserialised hash in any
+way.
+
+Example, convert all JSON objects into the integer 5:
+
+   my $js = JSON->new->filter_json_object (sub { 5 });
+   # returns [5]
+   $js->decode ('[{}]'); # the given subroutine takes a hash reference.
+   # throw an exception because allow_nonref is not enabled
+   # so a lone 5 is not allowed.
+   $js->decode ('{"a":1, "b":2}');
+
+=head2 filter_json_single_key_object
+
+    $json = $json->filter_json_single_key_object($key [=> $coderef])
+
+Works remotely similar to C<filter_json_object>, but is only called for
+JSON objects having a single key named C<$key>.
+
+This C<$coderef> is called before the one specified via
+C<filter_json_object>, if any. It gets passed the single value in the JSON
+object. If it returns a single value, it will be inserted into the data
+structure. If it returns nothing (not even C<undef> but the empty list),
+the callback from C<filter_json_object> will be called next, as if no
+single-key callback were specified.
+
+If C<$coderef> is omitted or undefined, the corresponding callback will be
+disabled. There can only ever be one callback for a given key.
+
+As this callback gets called less often then the C<filter_json_object>
+one, decoding speed will not usually suffer as much. Therefore, single-key
+objects make excellent targets to serialise Perl objects into, especially
+as single-key JSON objects are as close to the type-tagged value concept
+as JSON gets (it's basically an ID/VALUE tuple). Of course, JSON does not
+support this in any way, so you need to make sure your data never looks
+like a serialised Perl hash.
+
+Typical names for the single object key are C<__class_whatever__>, or
+C<$__dollars_are_rarely_used__$> or C<}ugly_brace_placement>, or even
+things like C<__class_md5sum(classname)__>, to reduce the risk of clashing
+with real hashes.
+
+Example, decode JSON objects of the form C<< { "__widget__" => <id> } >>
+into the corresponding C<< $WIDGET{<id>} >> object:
+
+   # return whatever is in $WIDGET{5}:
+   JSON
+      ->new
+      ->filter_json_single_key_object (__widget__ => sub {
+            $WIDGET{ $_[0] }
+         })
+      ->decode ('{"__widget__": 5')
+
+   # this can be used with a TO_JSON method in some "widget" class
+   # for serialisation to json:
+   sub WidgetBase::TO_JSON {
+      my ($self) = @_;
+
+      unless ($self->{id}) {
+         $self->{id} = ..get..some..id..;
+         $WIDGET{$self->{id}} = $self;
+      }
+
+      { __widget__ => $self->{id} }
+   }
+
+=head2 max_depth
+
+    $json = $json->max_depth([$maximum_nesting_depth])
+    
+    $max_depth = $json->get_max_depth
+
+Sets the maximum nesting level (default C<512>) accepted while encoding
+or decoding. If a higher nesting level is detected in JSON text or a Perl
+data structure, then the encoder and decoder will stop and croak at that
+point.
+
+Nesting level is defined by number of hash- or arrayrefs that the encoder
+needs to traverse to reach a given point or the number of C<{> or C<[>
+characters without their matching closing parenthesis crossed to reach a
+given character in a string.
+
+Setting the maximum depth to one disallows any nesting, so that ensures
+that the object is only a single hash/object or array.
+
+If no argument is given, the highest possible setting will be used, which
+is rarely useful.
+
+=head2 max_size
+
+    $json = $json->max_size([$maximum_string_size])
+    
+    $max_size = $json->get_max_size
+
+Set the maximum length a JSON text may have (in bytes) where decoding is
+being attempted. The default is C<0>, meaning no limit. When C<decode>
+is called on a string that is longer then this many bytes, it will not
+attempt to decode the string but throw an exception. This setting has no
+effect on C<encode> (yet).
+
+If no argument is given, the limit check will be deactivated (same as when
+C<0> is specified).
+
+=head2 encode
+
+    $json_text = $json->encode($perl_scalar)
+
+Converts the given Perl value or data structure to its JSON
+representation. Croaks on error.
+
+=head2 decode
+
+    $perl_scalar = $json->decode($json_text)
+
+The opposite of C<encode>: expects a JSON text and tries to parse it,
+returning the resulting simple scalar or reference. Croaks on error.
+
+=head2 decode_prefix
+
+    ($perl_scalar, $characters) = $json->decode_prefix($json_text)
+
+This works like the C<decode> method, but instead of raising an exception
+when there is trailing garbage after the first JSON object, it will
+silently stop parsing there and return the number of characters consumed
+so far.
+
+This is useful if your JSON texts are not delimited by an outer protocol
+and you need to know where the JSON text ends.
+
+   JSON->new->decode_prefix ("[1] the tail")
+   => ([1], 3)
+
+=head1 ADDITIONAL METHODS
+
+The following methods are for this module only.
+
+=head2 backend
+
+    $backend = $json->backend
+
+Since 2.92, C<backend> method returns an abstract backend module used currently,
+which should be JSON::Backend::XS (which inherits JSON::XS or Cpanel::JSON::XS),
+or JSON::Backend::PP (which inherits JSON::PP), not to monkey-patch the actual
+backend module globally.
+
+If you need to know what is used actually, use C<isa>, instead of string comparison.
+
+=head2 is_xs
+
+    $boolean = $json->is_xs
+
+Returns true if the backend inherits JSON::XS or Cpanel::JSON::XS.
+
+=head2 is_pp
+
+    $boolean = $json->is_pp
+
+Returns true if the backend inherits JSON::PP.
+
+=head2 property
+
+    $settings = $json->property()
+
+Returns a reference to a hash that holds all the common flag settings.
+
+    $json = $json->property('utf8' => 1)
+    $value = $json->property('utf8') # 1
+
+You can use this to get/set a value of a particular flag.
+
+=head1 INCREMENTAL PARSING
+
+This section is also taken from JSON::XS.
+
+In some cases, there is the need for incremental parsing of JSON
+texts. While this module always has to keep both JSON text and resulting
+Perl data structure in memory at one time, it does allow you to parse a
+JSON stream incrementally. It does so by accumulating text until it has
+a full JSON object, which it then can decode. This process is similar to
+using C<decode_prefix> to see if a full JSON object is available, but
+is much more efficient (and can be implemented with a minimum of method
+calls).
+
+This module will only attempt to parse the JSON text once it is sure it
+has enough text to get a decisive result, using a very simple but
+truly incremental parser. This means that it sometimes won't stop as
+early as the full parser, for example, it doesn't detect mismatched
+parentheses. The only thing it guarantees is that it starts decoding as
+soon as a syntactically valid JSON text has been seen. This means you need
+to set resource limits (e.g. C<max_size>) to ensure the parser will stop
+parsing in the presence if syntax errors.
+
+The following methods implement this incremental parser.
+
+=head2 incr_parse
+
+    $json->incr_parse( [$string] ) # void context
+    
+    $obj_or_undef = $json->incr_parse( [$string] ) # scalar context
+    
+    @obj_or_empty = $json->incr_parse( [$string] ) # list context
+
+This is the central parsing function. It can both append new text and
+extract objects from the stream accumulated so far (both of these
+functions are optional).
+
+If C<$string> is given, then this string is appended to the already
+existing JSON fragment stored in the C<$json> object.
+
+After that, if the function is called in void context, it will simply
+return without doing anything further. This can be used to add more text
+in as many chunks as you want.
+
+If the method is called in scalar context, then it will try to extract
+exactly I<one> JSON object. If that is successful, it will return this
+object, otherwise it will return C<undef>. If there is a parse error,
+this method will croak just as C<decode> would do (one can then use
+C<incr_skip> to skip the erroneous part). This is the most common way of
+using the method.
+
+And finally, in list context, it will try to extract as many objects
+from the stream as it can find and return them, or the empty list
+otherwise. For this to work, there must be no separators (other than
+whitespace) between the JSON objects or arrays, instead they must be
+concatenated back-to-back. If an error occurs, an exception will be
+raised as in the scalar context case. Note that in this case, any
+previously-parsed JSON texts will be lost.
+
+Example: Parse some JSON arrays/objects in a given string and return
+them.
+
+    my @objs = JSON->new->incr_parse ("[5][7][1,2]");
+
+=head2 incr_text
+
+    $lvalue_string = $json->incr_text
+
+This method returns the currently stored JSON fragment as an lvalue, that
+is, you can manipulate it. This I<only> works when a preceding call to
+C<incr_parse> in I<scalar context> successfully returned an object. Under
+all other circumstances you must not call this function (I mean it.
+although in simple tests it might actually work, it I<will> fail under
+real world conditions). As a special exception, you can also call this
+method before having parsed anything.
+
+That means you can only use this function to look at or manipulate text
+before or after complete JSON objects, not while the parser is in the
+middle of parsing a JSON object.
+
+This function is useful in two cases: a) finding the trailing text after a
+JSON object or b) parsing multiple JSON objects separated by non-JSON text
+(such as commas).
+
+=head2 incr_skip
+
+    $json->incr_skip
+
+This will reset the state of the incremental parser and will remove
+the parsed text from the input buffer so far. This is useful after
+C<incr_parse> died, in which case the input buffer and incremental parser
+state is left unchanged, to skip the text parsed so far and to reset the
+parse state.
+
+The difference to C<incr_reset> is that only text until the parse error
+occurred is removed.
+
+=head2 incr_reset
+
+    $json->incr_reset
+
+This completely resets the incremental parser, that is, after this call,
+it will be as if the parser had never parsed anything.
+
+This is useful if you want to repeatedly parse JSON objects and want to
+ignore any trailing data, which means you have to reset the parser after
+each successful decode.
+
+=head1 MAPPING
+
+Most of this section is also taken from JSON::XS.
+
+This section describes how the backend modules map Perl values to JSON values and
+vice versa. These mappings are designed to "do the right thing" in most
+circumstances automatically, preserving round-tripping characteristics
+(what you put in comes out as something equivalent).
+
+For the more enlightened: note that in the following descriptions,
+lowercase I<perl> refers to the Perl interpreter, while uppercase I<Perl>
+refers to the abstract Perl language itself.
+
+=head2 JSON -> PERL
+
+=over 4
+
+=item object
+
+A JSON object becomes a reference to a hash in Perl. No ordering of object
+keys is preserved (JSON does not preserver object key ordering itself).
+
+=item array
+
+A JSON array becomes a reference to an array in Perl.
+
+=item string
+
+A JSON string becomes a string scalar in Perl - Unicode codepoints in JSON
+are represented by the same codepoints in the Perl string, so no manual
+decoding is necessary.
+
+=item number
+
+A JSON number becomes either an integer, numeric (floating point) or
+string scalar in perl, depending on its range and any fractional parts. On
+the Perl level, there is no difference between those as Perl handles all
+the conversion details, but an integer may take slightly less memory and
+might represent more values exactly than floating point numbers.
+
+If the number consists of digits only, this module will try to represent
+it as an integer value. If that fails, it will try to represent it as
+a numeric (floating point) value if that is possible without loss of
+precision. Otherwise it will preserve the number as a string value (in
+which case you lose roundtripping ability, as the JSON number will be
+re-encoded to a JSON string).
+
+Numbers containing a fractional or exponential part will always be
+represented as numeric (floating point) values, possibly at a loss of
+precision (in which case you might lose perfect roundtripping ability, but
+the JSON number will still be re-encoded as a JSON number).
+
+Note that precision is not accuracy - binary floating point values cannot
+represent most decimal fractions exactly, and when converting from and to
+floating point, this module only guarantees precision up to but not including
+the least significant bit.
+
+=item true, false
+
+These JSON atoms become C<JSON::true> and C<JSON::false>,
+respectively. They are overloaded to act almost exactly like the numbers
+C<1> and C<0>. You can check whether a scalar is a JSON boolean by using
+the C<JSON::is_bool> function.
+
+=item null
+
+A JSON null atom becomes C<undef> in Perl.
+
+=item shell-style comments (C<< # I<text> >>)
+
+As a nonstandard extension to the JSON syntax that is enabled by the
+C<relaxed> setting, shell-style comments are allowed. They can start
+anywhere outside strings and go till the end of the line.
+
+=back
+
+
+=head2 PERL -> JSON
+
+The mapping from Perl to JSON is slightly more difficult, as Perl is a
+truly typeless language, so we can only guess which JSON type is meant by
+a Perl value.
+
+=over 4
+
+=item hash references
+
+Perl hash references become JSON objects. As there is no inherent
+ordering in hash keys (or JSON objects), they will usually be encoded
+in a pseudo-random order. This module can optionally sort the hash keys
+(determined by the I<canonical> flag), so the same data structure will
+serialise to the same JSON text (given same settings and version of
+the same backend), but this incurs a runtime overhead and is only rarely useful,
+e.g. when you want to compare some JSON text against another for equality.
+
+=item array references
+
+Perl array references become JSON arrays.
+
+=item other references
+
+Other unblessed references are generally not allowed and will cause an
+exception to be thrown, except for references to the integers C<0> and
+C<1>, which get turned into C<false> and C<true> atoms in JSON. You can
+also use C<JSON::false> and C<JSON::true> to improve readability.
+
+   encode_json [\0,JSON::true]      # yields [false,true]
+
+=item JSON::true, JSON::false, JSON::null
+
+These special values become JSON true and JSON false values,
+respectively. You can also use C<\1> and C<\0> directly if you want.
+
+=item blessed objects
+
+Blessed objects are not directly representable in JSON, but C<JSON::XS>
+allows various ways of handling objects. See L<OBJECT SERIALISATION>,
+below, for details.
+
+=item simple scalars
+
+Simple Perl scalars (any scalar that is not a reference) are the most
+difficult objects to encode: this module will encode undefined scalars as
+JSON C<null> values, scalars that have last been used in a string context
+before encoding as JSON strings, and anything else as number value:
+
+   # dump as number
+   encode_json [2]                      # yields [2]
+   encode_json [-3.0e17]                # yields [-3e+17]
+   my $value = 5; encode_json [$value]  # yields [5]
+
+   # used as string, so dump as string
+   print $value;
+   encode_json [$value]                 # yields ["5"]
+
+   # undef becomes null
+   encode_json [undef]                  # yields [null]
+
+You can force the type to be a string by stringifying it:
+
+   my $x = 3.1; # some variable containing a number
+   "$x";        # stringified
+   $x .= "";    # another, more awkward way to stringify
+   print $x;    # perl does it for you, too, quite often
+
+You can force the type to be a number by numifying it:
+
+   my $x = "3"; # some variable containing a string
+   $x += 0;     # numify it, ensuring it will be dumped as a number
+   $x *= 1;     # same thing, the choice is yours.
+
+You can not currently force the type in other, less obscure, ways. Tell me
+if you need this capability (but don't forget to explain why it's needed
+:).
+
+Note that numerical precision has the same meaning as under Perl (so
+binary to decimal conversion follows the same rules as in Perl, which
+can differ to other languages). Also, your perl interpreter might expose
+extensions to the floating point numbers of your platform, such as
+infinities or NaN's - these cannot be represented in JSON, and it is an
+error to pass those in.
+
+=back
+
+=head2 OBJECT SERIALISATION
+
+As for Perl objects, this module only supports a pure JSON representation
+(without the ability to deserialise the object automatically again).
+
+=head3 SERIALISATION
+
+What happens when this module encounters a Perl object depends on the
+C<allow_blessed> and C<convert_blessed> settings, which are used in
+this order:
+
+=over 4
+
+=item 1. C<convert_blessed> is enabled and the object has a C<TO_JSON> method.
+
+In this case, the C<TO_JSON> method of the object is invoked in scalar
+context. It must return a single scalar that can be directly encoded into
+JSON. This scalar replaces the object in the JSON text.
+
+For example, the following C<TO_JSON> method will convert all L<URI>
+objects to JSON strings when serialised. The fact that these values
+originally were L<URI> objects is lost.
+
+   sub URI::TO_JSON {
+      my ($uri) = @_;
+      $uri->as_string
+   }
+
+=item 2. C<allow_blessed> is enabled.
+
+The object will be serialised as a JSON null value.
+
+=item 3. none of the above
+
+If none of the settings are enabled or the respective methods are missing,
+this module throws an exception.
+
+=back
+
+=head1 ENCODING/CODESET FLAG NOTES
+
+This section is taken from JSON::XS.
+
+The interested reader might have seen a number of flags that signify
+encodings or codesets - C<utf8>, C<latin1> and C<ascii>. There seems to be
+some confusion on what these do, so here is a short comparison:
+
+C<utf8> controls whether the JSON text created by C<encode> (and expected
+by C<decode>) is UTF-8 encoded or not, while C<latin1> and C<ascii> only
+control whether C<encode> escapes character values outside their respective
+codeset range. Neither of these flags conflict with each other, although
+some combinations make less sense than others.
+
+Care has been taken to make all flags symmetrical with respect to
+C<encode> and C<decode>, that is, texts encoded with any combination of
+these flag values will be correctly decoded when the same flags are used
+- in general, if you use different flag settings while encoding vs. when
+decoding you likely have a bug somewhere.
+
+Below comes a verbose discussion of these flags. Note that a "codeset" is
+simply an abstract set of character-codepoint pairs, while an encoding
+takes those codepoint numbers and I<encodes> them, in our case into
+octets. Unicode is (among other things) a codeset, UTF-8 is an encoding,
+and ISO-8859-1 (= latin 1) and ASCII are both codesets I<and> encodings at
+the same time, which can be confusing.
+
+=over 4
+
+=item C<utf8> flag disabled
+
+When C<utf8> is disabled (the default), then C<encode>/C<decode> generate
+and expect Unicode strings, that is, characters with high ordinal Unicode
+values (> 255) will be encoded as such characters, and likewise such
+characters are decoded as-is, no changes to them will be done, except
+"(re-)interpreting" them as Unicode codepoints or Unicode characters,
+respectively (to Perl, these are the same thing in strings unless you do
+funny/weird/dumb stuff).
+
+This is useful when you want to do the encoding yourself (e.g. when you
+want to have UTF-16 encoded JSON texts) or when some other layer does
+the encoding for you (for example, when printing to a terminal using a
+filehandle that transparently encodes to UTF-8 you certainly do NOT want
+to UTF-8 encode your data first and have Perl encode it another time).
+
+=item C<utf8> flag enabled
+
+If the C<utf8>-flag is enabled, C<encode>/C<decode> will encode all
+characters using the corresponding UTF-8 multi-byte sequence, and will
+expect your input strings to be encoded as UTF-8, that is, no "character"
+of the input string must have any value > 255, as UTF-8 does not allow
+that.
+
+The C<utf8> flag therefore switches between two modes: disabled means you
+will get a Unicode string in Perl, enabled means you get an UTF-8 encoded
+octet/binary string in Perl.
+
+=item C<latin1> or C<ascii> flags enabled
+
+With C<latin1> (or C<ascii>) enabled, C<encode> will escape characters
+with ordinal values > 255 (> 127 with C<ascii>) and encode the remaining
+characters as specified by the C<utf8> flag.
+
+If C<utf8> is disabled, then the result is also correctly encoded in those
+character sets (as both are proper subsets of Unicode, meaning that a
+Unicode string with all character values < 256 is the same thing as a
+ISO-8859-1 string, and a Unicode string with all character values < 128 is
+the same thing as an ASCII string in Perl).
+
+If C<utf8> is enabled, you still get a correct UTF-8-encoded string,
+regardless of these flags, just some more characters will be escaped using
+C<\uXXXX> then before.
+
+Note that ISO-8859-1-I<encoded> strings are not compatible with UTF-8
+encoding, while ASCII-encoded strings are. That is because the ISO-8859-1
+encoding is NOT a subset of UTF-8 (despite the ISO-8859-1 I<codeset> being
+a subset of Unicode), while ASCII is.
+
+Surprisingly, C<decode> will ignore these flags and so treat all input
+values as governed by the C<utf8> flag. If it is disabled, this allows you
+to decode ISO-8859-1- and ASCII-encoded strings, as both strict subsets of
+Unicode. If it is enabled, you can correctly decode UTF-8 encoded strings.
+
+So neither C<latin1> nor C<ascii> are incompatible with the C<utf8> flag -
+they only govern when the JSON output engine escapes a character or not.
+
+The main use for C<latin1> is to relatively efficiently store binary data
+as JSON, at the expense of breaking compatibility with most JSON decoders.
+
+The main use for C<ascii> is to force the output to not contain characters
+with values > 127, which means you can interpret the resulting string
+as UTF-8, ISO-8859-1, ASCII, KOI8-R or most about any character set and
+8-bit-encoding, and still get the same data structure back. This is useful
+when your channel for JSON transfer is not 8-bit clean or the encoding
+might be mangled in between (e.g. in mail), and works because ASCII is a
+proper subset of most 8-bit and multibyte encodings in use in the world.
+
+=back
+
+=head1 BACKWARD INCOMPATIBILITY
+
+Since version 2.90, stringification (and string comparison) for
+C<JSON::true> and C<JSON::false> has not been overloaded. It shouldn't
+matter as long as you treat them as boolean values, but a code that
+expects they are stringified as "true" or "false" doesn't work as
+you have expected any more.
+
+    if (JSON::true eq 'true') {  # now fails
+
+    print "The result is $JSON::true now."; # => The result is 1 now.
+
+And now these boolean values don't inherit JSON::Boolean, either.
+When you need to test a value is a JSON boolean value or not, use
+C<JSON::is_bool> function, instead of testing the value inherits
+a particular boolean class or not.
+
+=head1 BUGS
+
+Please report bugs on backend selection and additional features
+this module provides to RT or GitHub issues for this module:
+
+=over 4
+
+=item https://rt.cpan.org/Public/Dist/Display.html?Queue=JSON
+
+=item https://github.com/makamaka/JSON/issues
+
+=back
+
+Please report bugs and feature requests on decoding/encoding
+and boolean behaviors to the author of the backend module you
+are using.
+
+=head1 SEE ALSO
+
+L<JSON::XS>, L<Cpanel::JSON::XS>, L<JSON::PP> for backends.
+
+L<JSON::MaybeXS>, an alternative that prefers Cpanel::JSON::XS.
+
+C<RFC4627>(L<http://www.ietf.org/rfc/rfc4627.txt>)
+
+=head1 AUTHOR
+
+Makamaka Hannyaharamitu, E<lt>makamaka[at]cpan.orgE<gt>
+
+JSON::XS was written by  Marc Lehmann <schmorp[at]schmorp.de>
+
+The release of this new version owes to the courtesy of Marc Lehmann.
+
+
+=head1 COPYRIGHT AND LICENSE
+
+Copyright 2005-2013 by Makamaka Hannyaharamitu
+
+This library is free software; you can redistribute it and/or modify
+it under the same terms as Perl itself. 
+
+=cut
+
diff --git a/Master/tlpkg/tlperl/site/lib/JSON/XS.pm b/Master/tlpkg/tlperl/site/lib/JSON/XS.pm
new file mode 100644
index 00000000000..674937f178b
--- /dev/null
+++ b/Master/tlpkg/tlperl/site/lib/JSON/XS.pm
@@ -0,0 +1,1761 @@
+=head1 NAME
+
+JSON::XS - JSON serialising/deserialising, done correctly and fast
+
+=encoding utf-8
+
+JSON::XS - 正しくて高速な JSON シリアライザ/デシリアライザ
+           (http://fleur.hio.jp/perldoc/mix/lib/JSON/XS.html)
+
+=head1 SYNOPSIS
+
+ use JSON::XS;
+
+ # exported functions, they croak on error
+ # and expect/generate UTF-8
+
+ $utf8_encoded_json_text = encode_json $perl_hash_or_arrayref;
+ $perl_hash_or_arrayref  = decode_json $utf8_encoded_json_text;
+
+ # OO-interface
+
+ $coder = JSON::XS->new->ascii->pretty->allow_nonref;
+ $pretty_printed_unencoded = $coder->encode ($perl_scalar);
+ $perl_scalar = $coder->decode ($unicode_json_text);
+
+ # Note that JSON version 2.0 and above will automatically use JSON::XS
+ # if available, at virtually no speed overhead either, so you should
+ # be able to just:
+ 
+ use JSON;
+
+ # and do the same things, except that you have a pure-perl fallback now.
+
+=head1 DESCRIPTION
+
+This module converts Perl data structures to JSON and vice versa. Its
+primary goal is to be I<correct> and its secondary goal is to be
+I<fast>. To reach the latter goal it was written in C.
+
+Beginning with version 2.0 of the JSON module, when both JSON and
+JSON::XS are installed, then JSON will fall back on JSON::XS (this can be
+overridden) with no overhead due to emulation (by inheriting constructor
+and methods). If JSON::XS is not available, it will fall back to the
+compatible JSON::PP module as backend, so using JSON instead of JSON::XS
+gives you a portable JSON API that can be fast when you need it and
+doesn't require a C compiler when that is a problem.
+
+As this is the n-th-something JSON module on CPAN, what was the reason
+to write yet another JSON module? While it seems there are many JSON
+modules, none of them correctly handle all corner cases, and in most cases
+their maintainers are unresponsive, gone missing, or not listening to bug
+reports for other reasons.
+
+See MAPPING, below, on how JSON::XS maps perl values to JSON values and
+vice versa.
+
+=head2 FEATURES
+
+=over 4
+
+=item * correct Unicode handling
+
+This module knows how to handle Unicode, documents how and when it does
+so, and even documents what "correct" means.
+
+=item * round-trip integrity
+
+When you serialise a perl data structure using only data types supported
+by JSON and Perl, the deserialised data structure is identical on the Perl
+level. (e.g. the string "2.0" doesn't suddenly become "2" just because
+it looks like a number). There I<are> minor exceptions to this, read the
+MAPPING section below to learn about those.
+
+=item * strict checking of JSON correctness
+
+There is no guessing, no generating of illegal JSON texts by default,
+and only JSON is accepted as input by default (the latter is a security
+feature).
+
+=item * fast
+
+Compared to other JSON modules and other serialisers such as Storable,
+this module usually compares favourably in terms of speed, too.
+
+=item * simple to use
+
+This module has both a simple functional interface as well as an object
+oriented interface.
+
+=item * reasonably versatile output formats
+
+You can choose between the most compact guaranteed-single-line format
+possible (nice for simple line-based protocols), a pure-ASCII format
+(for when your transport is not 8-bit clean, still supports the whole
+Unicode range), or a pretty-printed format (for when you want to read that
+stuff). Or you can combine those features in whatever way you like.
+
+=back
+
+=cut
+
+package JSON::XS;
+
+use common::sense;
+
+our $VERSION = 3.04;
+our @ISA = qw(Exporter);
+
+our @EXPORT = qw(encode_json decode_json);
+
+use Exporter;
+use XSLoader;
+
+use Types::Serialiser ();
+
+=head1 FUNCTIONAL INTERFACE
+
+The following convenience methods are provided by this module. They are
+exported by default:
+
+=over 4
+
+=item $json_text = encode_json $perl_scalar
+
+Converts the given Perl data structure to a UTF-8 encoded, binary string
+(that is, the string contains octets only). Croaks on error.
+
+This function call is functionally identical to:
+
+   $json_text = JSON::XS->new->utf8->encode ($perl_scalar)
+
+Except being faster.
+
+=item $perl_scalar = decode_json $json_text
+
+The opposite of C<encode_json>: expects an UTF-8 (binary) string and tries
+to parse that as an UTF-8 encoded JSON text, returning the resulting
+reference. Croaks on error.
+
+This function call is functionally identical to:
+
+   $perl_scalar = JSON::XS->new->utf8->decode ($json_text)
+
+Except being faster.
+
+=back
+
+
+=head1 A FEW NOTES ON UNICODE AND PERL
+
+Since this often leads to confusion, here are a few very clear words on
+how Unicode works in Perl, modulo bugs.
+
+=over 4
+
+=item 1. Perl strings can store characters with ordinal values > 255.
+
+This enables you to store Unicode characters as single characters in a
+Perl string - very natural.
+
+=item 2. Perl does I<not> associate an encoding with your strings.
+
+... until you force it to, e.g. when matching it against a regex, or
+printing the scalar to a file, in which case Perl either interprets your
+string as locale-encoded text, octets/binary, or as Unicode, depending
+on various settings. In no case is an encoding stored together with your
+data, it is I<use> that decides encoding, not any magical meta data.
+
+=item 3. The internal utf-8 flag has no meaning with regards to the
+encoding of your string.
+
+Just ignore that flag unless you debug a Perl bug, a module written in
+XS or want to dive into the internals of perl. Otherwise it will only
+confuse you, as, despite the name, it says nothing about how your string
+is encoded. You can have Unicode strings with that flag set, with that
+flag clear, and you can have binary data with that flag set and that flag
+clear. Other possibilities exist, too.
+
+If you didn't know about that flag, just the better, pretend it doesn't
+exist.
+
+=item 4. A "Unicode String" is simply a string where each character can be
+validly interpreted as a Unicode code point.
+
+If you have UTF-8 encoded data, it is no longer a Unicode string, but a
+Unicode string encoded in UTF-8, giving you a binary string.
+
+=item 5. A string containing "high" (> 255) character values is I<not> a UTF-8 string.
+
+It's a fact. Learn to live with it.
+
+=back
+
+I hope this helps :)
+
+
+=head1 OBJECT-ORIENTED INTERFACE
+
+The object oriented interface lets you configure your own encoding or
+decoding style, within the limits of supported formats.
+
+=over 4
+
+=item $json = new JSON::XS
+
+Creates a new JSON::XS object that can be used to de/encode JSON
+strings. All boolean flags described below are by default I<disabled>.
+
+The mutators for flags all return the JSON object again and thus calls can
+be chained:
+
+   my $json = JSON::XS->new->utf8->space_after->encode ({a => [1,2]})
+   => {"a": [1, 2]}
+
+=item $json = $json->ascii ([$enable])
+
+=item $enabled = $json->get_ascii
+
+If C<$enable> is true (or missing), then the C<encode> method will not
+generate characters outside the code range C<0..127> (which is ASCII). Any
+Unicode characters outside that range will be escaped using either a
+single \uXXXX (BMP characters) or a double \uHHHH\uLLLLL escape sequence,
+as per RFC4627. The resulting encoded JSON text can be treated as a native
+Unicode string, an ascii-encoded, latin1-encoded or UTF-8 encoded string,
+or any other superset of ASCII.
+
+If C<$enable> is false, then the C<encode> method will not escape Unicode
+characters unless required by the JSON syntax or other flags. This results
+in a faster and more compact format.
+
+See also the section I<ENCODING/CODESET FLAG NOTES> later in this
+document.
+
+The main use for this flag is to produce JSON texts that can be
+transmitted over a 7-bit channel, as the encoded JSON texts will not
+contain any 8 bit characters.
+
+  JSON::XS->new->ascii (1)->encode ([chr 0x10401])
+  => ["\ud801\udc01"]
+
+=item $json = $json->latin1 ([$enable])
+
+=item $enabled = $json->get_latin1
+
+If C<$enable> is true (or missing), then the C<encode> method will encode
+the resulting JSON text as latin1 (or iso-8859-1), escaping any characters
+outside the code range C<0..255>. The resulting string can be treated as a
+latin1-encoded JSON text or a native Unicode string. The C<decode> method
+will not be affected in any way by this flag, as C<decode> by default
+expects Unicode, which is a strict superset of latin1.
+
+If C<$enable> is false, then the C<encode> method will not escape Unicode
+characters unless required by the JSON syntax or other flags.
+
+See also the section I<ENCODING/CODESET FLAG NOTES> later in this
+document.
+
+The main use for this flag is efficiently encoding binary data as JSON
+text, as most octets will not be escaped, resulting in a smaller encoded
+size. The disadvantage is that the resulting JSON text is encoded
+in latin1 (and must correctly be treated as such when storing and
+transferring), a rare encoding for JSON. It is therefore most useful when
+you want to store data structures known to contain binary data efficiently
+in files or databases, not when talking to other JSON encoders/decoders.
+
+  JSON::XS->new->latin1->encode (["\x{89}\x{abc}"]
+  => ["\x{89}\\u0abc"]    # (perl syntax, U+abc escaped, U+89 not)
+
+=item $json = $json->utf8 ([$enable])
+
+=item $enabled = $json->get_utf8
+
+If C<$enable> is true (or missing), then the C<encode> method will encode
+the JSON result into UTF-8, as required by many protocols, while the
+C<decode> method expects to be handled an UTF-8-encoded string.  Please
+note that UTF-8-encoded strings do not contain any characters outside the
+range C<0..255>, they are thus useful for bytewise/binary I/O. In future
+versions, enabling this option might enable autodetection of the UTF-16
+and UTF-32 encoding families, as described in RFC4627.
+
+If C<$enable> is false, then the C<encode> method will return the JSON
+string as a (non-encoded) Unicode string, while C<decode> expects thus a
+Unicode string.  Any decoding or encoding (e.g. to UTF-8 or UTF-16) needs
+to be done yourself, e.g. using the Encode module.
+
+See also the section I<ENCODING/CODESET FLAG NOTES> later in this
+document.
+
+Example, output UTF-16BE-encoded JSON:
+
+  use Encode;
+  $jsontext = encode "UTF-16BE", JSON::XS->new->encode ($object);
+
+Example, decode UTF-32LE-encoded JSON:
+
+  use Encode;
+  $object = JSON::XS->new->decode (decode "UTF-32LE", $jsontext);
+
+=item $json = $json->pretty ([$enable])
+
+This enables (or disables) all of the C<indent>, C<space_before> and
+C<space_after> (and in the future possibly more) flags in one call to
+generate the most readable (or most compact) form possible.
+
+Example, pretty-print some simple structure:
+
+   my $json = JSON::XS->new->pretty(1)->encode ({a => [1,2]})
+   =>
+   {
+      "a" : [
+         1,
+         2
+      ]
+   }
+
+=item $json = $json->indent ([$enable])
+
+=item $enabled = $json->get_indent
+
+If C<$enable> is true (or missing), then the C<encode> method will use a multiline
+format as output, putting every array member or object/hash key-value pair
+into its own line, indenting them properly.
+
+If C<$enable> is false, no newlines or indenting will be produced, and the
+resulting JSON text is guaranteed not to contain any C<newlines>.
+
+This setting has no effect when decoding JSON texts.
+
+=item $json = $json->space_before ([$enable])
+
+=item $enabled = $json->get_space_before
+
+If C<$enable> is true (or missing), then the C<encode> method will add an extra
+optional space before the C<:> separating keys from values in JSON objects.
+
+If C<$enable> is false, then the C<encode> method will not add any extra
+space at those places.
+
+This setting has no effect when decoding JSON texts. You will also
+most likely combine this setting with C<space_after>.
+
+Example, space_before enabled, space_after and indent disabled:
+
+   {"key" :"value"}
+
+=item $json = $json->space_after ([$enable])
+
+=item $enabled = $json->get_space_after
+
+If C<$enable> is true (or missing), then the C<encode> method will add an extra
+optional space after the C<:> separating keys from values in JSON objects
+and extra whitespace after the C<,> separating key-value pairs and array
+members.
+
+If C<$enable> is false, then the C<encode> method will not add any extra
+space at those places.
+
+This setting has no effect when decoding JSON texts.
+
+Example, space_before and indent disabled, space_after enabled:
+
+   {"key": "value"}
+
+=item $json = $json->relaxed ([$enable])
+
+=item $enabled = $json->get_relaxed
+
+If C<$enable> is true (or missing), then C<decode> will accept some
+extensions to normal JSON syntax (see below). C<encode> will not be
+affected in anyway. I<Be aware that this option makes you accept invalid
+JSON texts as if they were valid!>. I suggest only to use this option to
+parse application-specific files written by humans (configuration files,
+resource files etc.)
+
+If C<$enable> is false (the default), then C<decode> will only accept
+valid JSON texts.
+
+Currently accepted extensions are:
+
+=over 4
+
+=item * list items can have an end-comma
+
+JSON I<separates> array elements and key-value pairs with commas. This
+can be annoying if you write JSON texts manually and want to be able to
+quickly append elements, so this extension accepts comma at the end of
+such items not just between them:
+
+   [
+      1,
+      2, <- this comma not normally allowed
+   ]
+   {
+      "k1": "v1",
+      "k2": "v2", <- this comma not normally allowed
+   }
+
+=item * shell-style '#'-comments
+
+Whenever JSON allows whitespace, shell-style comments are additionally
+allowed. They are terminated by the first carriage-return or line-feed
+character, after which more white-space and comments are allowed.
+
+  [
+     1, # this comment not allowed in JSON
+        # neither this one...
+  ]
+
+=item * literal ASCII TAB characters in strings
+
+Literal ASCII TAB characters are now allowed in strings (and treated as
+C<\t>).
+
+  [
+     "Hello\tWorld",
+     "Hello<TAB>World", # literal <TAB> would not normally be allowed
+  ]
+
+=back
+
+=item $json = $json->canonical ([$enable])
+
+=item $enabled = $json->get_canonical
+
+If C<$enable> is true (or missing), then the C<encode> method will output JSON objects
+by sorting their keys. This is adding a comparatively high overhead.
+
+If C<$enable> is false, then the C<encode> method will output key-value
+pairs in the order Perl stores them (which will likely change between runs
+of the same script, and can change even within the same run from 5.18
+onwards).
+
+This option is useful if you want the same data structure to be encoded as
+the same JSON text (given the same overall settings). If it is disabled,
+the same hash might be encoded differently even if contains the same data,
+as key-value pairs have no inherent ordering in Perl.
+
+This setting has no effect when decoding JSON texts.
+
+This setting has currently no effect on tied hashes.
+
+=item $json = $json->allow_nonref ([$enable])
+
+=item $enabled = $json->get_allow_nonref
+
+If C<$enable> is true (or missing), then the C<encode> method can convert a
+non-reference into its corresponding string, number or null JSON value,
+which is an extension to RFC4627. Likewise, C<decode> will accept those JSON
+values instead of croaking.
+
+If C<$enable> is false, then the C<encode> method will croak if it isn't
+passed an arrayref or hashref, as JSON texts must either be an object
+or array. Likewise, C<decode> will croak if given something that is not a
+JSON object or array.
+
+Example, encode a Perl scalar as JSON value with enabled C<allow_nonref>,
+resulting in an invalid JSON text:
+
+   JSON::XS->new->allow_nonref->encode ("Hello, World!")
+   => "Hello, World!"
+
+=item $json = $json->allow_unknown ([$enable])
+
+=item $enabled = $json->get_allow_unknown
+
+If C<$enable> is true (or missing), then C<encode> will I<not> throw an
+exception when it encounters values it cannot represent in JSON (for
+example, filehandles) but instead will encode a JSON C<null> value. Note
+that blessed objects are not included here and are handled separately by
+c<allow_nonref>.
+
+If C<$enable> is false (the default), then C<encode> will throw an
+exception when it encounters anything it cannot encode as JSON.
+
+This option does not affect C<decode> in any way, and it is recommended to
+leave it off unless you know your communications partner.
+
+=item $json = $json->allow_blessed ([$enable])
+
+=item $enabled = $json->get_allow_blessed
+
+See L<OBJECT SERIALISATION> for details.
+
+If C<$enable> is true (or missing), then the C<encode> method will not
+barf when it encounters a blessed reference that it cannot convert
+otherwise. Instead, a JSON C<null> value is encoded instead of the object.
+
+If C<$enable> is false (the default), then C<encode> will throw an
+exception when it encounters a blessed object that it cannot convert
+otherwise.
+
+This setting has no effect on C<decode>.
+
+=item $json = $json->convert_blessed ([$enable])
+
+=item $enabled = $json->get_convert_blessed
+
+See L<OBJECT SERIALISATION> for details.
+
+If C<$enable> is true (or missing), then C<encode>, upon encountering a
+blessed object, will check for the availability of the C<TO_JSON> method
+on the object's class. If found, it will be called in scalar context and
+the resulting scalar will be encoded instead of the object.
+
+The C<TO_JSON> method may safely call die if it wants. If C<TO_JSON>
+returns other blessed objects, those will be handled in the same
+way. C<TO_JSON> must take care of not causing an endless recursion cycle
+(== crash) in this case. The name of C<TO_JSON> was chosen because other
+methods called by the Perl core (== not by the user of the object) are
+usually in upper case letters and to avoid collisions with any C<to_json>
+function or method.
+
+If C<$enable> is false (the default), then C<encode> will not consider
+this type of conversion.
+
+This setting has no effect on C<decode>.
+
+=item $json = $json->allow_tags ([$enable])
+
+=item $enabled = $json->allow_tags
+
+See L<OBJECT SERIALISATION> for details.
+
+If C<$enable> is true (or missing), then C<encode>, upon encountering a
+blessed object, will check for the availability of the C<FREEZE> method on
+the object's class. If found, it will be used to serialise the object into
+a nonstandard tagged JSON value (that JSON decoders cannot decode).
+
+It also causes C<decode> to parse such tagged JSON values and deserialise
+them via a call to the C<THAW> method.
+
+If C<$enable> is false (the default), then C<encode> will not consider
+this type of conversion, and tagged JSON values will cause a parse error
+in C<decode>, as if tags were not part of the grammar.
+
+=item $json = $json->filter_json_object ([$coderef->($hashref)])
+
+When C<$coderef> is specified, it will be called from C<decode> each
+time it decodes a JSON object. The only argument is a reference to the
+newly-created hash. If the code references returns a single scalar (which
+need not be a reference), this value (i.e. a copy of that scalar to avoid
+aliasing) is inserted into the deserialised data structure. If it returns
+an empty list (NOTE: I<not> C<undef>, which is a valid scalar), the
+original deserialised hash will be inserted. This setting can slow down
+decoding considerably.
+
+When C<$coderef> is omitted or undefined, any existing callback will
+be removed and C<decode> will not change the deserialised hash in any
+way.
+
+Example, convert all JSON objects into the integer 5:
+
+   my $js = JSON::XS->new->filter_json_object (sub { 5 });
+   # returns [5]
+   $js->decode ('[{}]')
+   # throw an exception because allow_nonref is not enabled
+   # so a lone 5 is not allowed.
+   $js->decode ('{"a":1, "b":2}');
+
+=item $json = $json->filter_json_single_key_object ($key [=> $coderef->($value)])
+
+Works remotely similar to C<filter_json_object>, but is only called for
+JSON objects having a single key named C<$key>.
+
+This C<$coderef> is called before the one specified via
+C<filter_json_object>, if any. It gets passed the single value in the JSON
+object. If it returns a single value, it will be inserted into the data
+structure. If it returns nothing (not even C<undef> but the empty list),
+the callback from C<filter_json_object> will be called next, as if no
+single-key callback were specified.
+
+If C<$coderef> is omitted or undefined, the corresponding callback will be
+disabled. There can only ever be one callback for a given key.
+
+As this callback gets called less often then the C<filter_json_object>
+one, decoding speed will not usually suffer as much. Therefore, single-key
+objects make excellent targets to serialise Perl objects into, especially
+as single-key JSON objects are as close to the type-tagged value concept
+as JSON gets (it's basically an ID/VALUE tuple). Of course, JSON does not
+support this in any way, so you need to make sure your data never looks
+like a serialised Perl hash.
+
+Typical names for the single object key are C<__class_whatever__>, or
+C<$__dollars_are_rarely_used__$> or C<}ugly_brace_placement>, or even
+things like C<__class_md5sum(classname)__>, to reduce the risk of clashing
+with real hashes.
+
+Example, decode JSON objects of the form C<< { "__widget__" => <id> } >>
+into the corresponding C<< $WIDGET{<id>} >> object:
+
+   # return whatever is in $WIDGET{5}:
+   JSON::XS
+      ->new
+      ->filter_json_single_key_object (__widget__ => sub {
+            $WIDGET{ $_[0] }
+         })
+      ->decode ('{"__widget__": 5')
+
+   # this can be used with a TO_JSON method in some "widget" class
+   # for serialisation to json:
+   sub WidgetBase::TO_JSON {
+      my ($self) = @_;
+
+      unless ($self->{id}) {
+         $self->{id} = ..get..some..id..;
+         $WIDGET{$self->{id}} = $self;
+      }
+
+      { __widget__ => $self->{id} }
+   }
+
+=item $json = $json->shrink ([$enable])
+
+=item $enabled = $json->get_shrink
+
+Perl usually over-allocates memory a bit when allocating space for
+strings. This flag optionally resizes strings generated by either
+C<encode> or C<decode> to their minimum size possible. This can save
+memory when your JSON texts are either very very long or you have many
+short strings. It will also try to downgrade any strings to octet-form
+if possible: perl stores strings internally either in an encoding called
+UTF-X or in octet-form. The latter cannot store everything but uses less
+space in general (and some buggy Perl or C code might even rely on that
+internal representation being used).
+
+The actual definition of what shrink does might change in future versions,
+but it will always try to save space at the expense of time.
+
+If C<$enable> is true (or missing), the string returned by C<encode> will
+be shrunk-to-fit, while all strings generated by C<decode> will also be
+shrunk-to-fit.
+
+If C<$enable> is false, then the normal perl allocation algorithms are used.
+If you work with your data, then this is likely to be faster.
+
+In the future, this setting might control other things, such as converting
+strings that look like integers or floats into integers or floats
+internally (there is no difference on the Perl level), saving space.
+
+=item $json = $json->max_depth ([$maximum_nesting_depth])
+
+=item $max_depth = $json->get_max_depth
+
+Sets the maximum nesting level (default C<512>) accepted while encoding
+or decoding. If a higher nesting level is detected in JSON text or a Perl
+data structure, then the encoder and decoder will stop and croak at that
+point.
+
+Nesting level is defined by number of hash- or arrayrefs that the encoder
+needs to traverse to reach a given point or the number of C<{> or C<[>
+characters without their matching closing parenthesis crossed to reach a
+given character in a string.
+
+Setting the maximum depth to one disallows any nesting, so that ensures
+that the object is only a single hash/object or array.
+
+If no argument is given, the highest possible setting will be used, which
+is rarely useful.
+
+Note that nesting is implemented by recursion in C. The default value has
+been chosen to be as large as typical operating systems allow without
+crashing.
+
+See SECURITY CONSIDERATIONS, below, for more info on why this is useful.
+
+=item $json = $json->max_size ([$maximum_string_size])
+
+=item $max_size = $json->get_max_size
+
+Set the maximum length a JSON text may have (in bytes) where decoding is
+being attempted. The default is C<0>, meaning no limit. When C<decode>
+is called on a string that is longer then this many bytes, it will not
+attempt to decode the string but throw an exception. This setting has no
+effect on C<encode> (yet).
+
+If no argument is given, the limit check will be deactivated (same as when
+C<0> is specified).
+
+See SECURITY CONSIDERATIONS, below, for more info on why this is useful.
+
+=item $json_text = $json->encode ($perl_scalar)
+
+Converts the given Perl value or data structure to its JSON
+representation. Croaks on error.
+
+=item $perl_scalar = $json->decode ($json_text)
+
+The opposite of C<encode>: expects a JSON text and tries to parse it,
+returning the resulting simple scalar or reference. Croaks on error.
+
+=item ($perl_scalar, $characters) = $json->decode_prefix ($json_text)
+
+This works like the C<decode> method, but instead of raising an exception
+when there is trailing garbage after the first JSON object, it will
+silently stop parsing there and return the number of characters consumed
+so far.
+
+This is useful if your JSON texts are not delimited by an outer protocol
+and you need to know where the JSON text ends.
+
+   JSON::XS->new->decode_prefix ("[1] the tail")
+   => ([1], 3)
+
+=back
+
+
+=head1 INCREMENTAL PARSING
+
+In some cases, there is the need for incremental parsing of JSON
+texts. While this module always has to keep both JSON text and resulting
+Perl data structure in memory at one time, it does allow you to parse a
+JSON stream incrementally. It does so by accumulating text until it has
+a full JSON object, which it then can decode. This process is similar to
+using C<decode_prefix> to see if a full JSON object is available, but
+is much more efficient (and can be implemented with a minimum of method
+calls).
+
+JSON::XS will only attempt to parse the JSON text once it is sure it
+has enough text to get a decisive result, using a very simple but
+truly incremental parser. This means that it sometimes won't stop as
+early as the full parser, for example, it doesn't detect mismatched
+parentheses. The only thing it guarantees is that it starts decoding as
+soon as a syntactically valid JSON text has been seen. This means you need
+to set resource limits (e.g. C<max_size>) to ensure the parser will stop
+parsing in the presence if syntax errors.
+
+The following methods implement this incremental parser.
+
+=over 4
+
+=item [void, scalar or list context] = $json->incr_parse ([$string])
+
+This is the central parsing function. It can both append new text and
+extract objects from the stream accumulated so far (both of these
+functions are optional).
+
+If C<$string> is given, then this string is appended to the already
+existing JSON fragment stored in the C<$json> object.
+
+After that, if the function is called in void context, it will simply
+return without doing anything further. This can be used to add more text
+in as many chunks as you want.
+
+If the method is called in scalar context, then it will try to extract
+exactly I<one> JSON object. If that is successful, it will return this
+object, otherwise it will return C<undef>. If there is a parse error,
+this method will croak just as C<decode> would do (one can then use
+C<incr_skip> to skip the erroneous part). This is the most common way of
+using the method.
+
+And finally, in list context, it will try to extract as many objects
+from the stream as it can find and return them, or the empty list
+otherwise. For this to work, there must be no separators (other than
+whitespace) between the JSON objects or arrays, instead they must be
+concatenated back-to-back. If an error occurs, an exception will be
+raised as in the scalar context case. Note that in this case, any
+previously-parsed JSON texts will be lost.
+
+Example: Parse some JSON arrays/objects in a given string and return
+them.
+
+   my @objs = JSON::XS->new->incr_parse ("[5][7][1,2]");
+
+=item $lvalue_string = $json->incr_text
+
+This method returns the currently stored JSON fragment as an lvalue, that
+is, you can manipulate it. This I<only> works when a preceding call to
+C<incr_parse> in I<scalar context> successfully returned an object. Under
+all other circumstances you must not call this function (I mean it.
+although in simple tests it might actually work, it I<will> fail under
+real world conditions). As a special exception, you can also call this
+method before having parsed anything.
+
+That means you can only use this function to look at or manipulate text
+before or after complete JSON objects, not while the parser is in the
+middle of parsing a JSON object.
+
+This function is useful in two cases: a) finding the trailing text after a
+JSON object or b) parsing multiple JSON objects separated by non-JSON text
+(such as commas).
+
+=item $json->incr_skip
+
+This will reset the state of the incremental parser and will remove
+the parsed text from the input buffer so far. This is useful after
+C<incr_parse> died, in which case the input buffer and incremental parser
+state is left unchanged, to skip the text parsed so far and to reset the
+parse state.
+
+The difference to C<incr_reset> is that only text until the parse error
+occurred is removed.
+
+=item $json->incr_reset
+
+This completely resets the incremental parser, that is, after this call,
+it will be as if the parser had never parsed anything.
+
+This is useful if you want to repeatedly parse JSON objects and want to
+ignore any trailing data, which means you have to reset the parser after
+each successful decode.
+
+=back
+
+=head2 LIMITATIONS
+
+All options that affect decoding are supported, except
+C<allow_nonref>. The reason for this is that it cannot be made to work
+sensibly: JSON objects and arrays are self-delimited, i.e. you can
+concatenate them back to back and still decode them perfectly. This does
+not hold true for JSON numbers, however.
+
+For example, is the string C<1> a single JSON number, or is it simply the
+start of C<12>? Or is C<12> a single JSON number, or the concatenation
+of C<1> and C<2>? In neither case you can tell, and this is why JSON::XS
+takes the conservative route and disallows this case.
+
+=head2 EXAMPLES
+
+Some examples will make all this clearer. First, a simple example that
+works similarly to C<decode_prefix>: We want to decode the JSON object at
+the start of a string and identify the portion after the JSON object:
+
+   my $text = "[1,2,3] hello";
+
+   my $json = new JSON::XS;
+
+   my $obj = $json->incr_parse ($text)
+      or die "expected JSON object or array at beginning of string";
+
+   my $tail = $json->incr_text;
+   # $tail now contains " hello"
+
+Easy, isn't it?
+
+Now for a more complicated example: Imagine a hypothetical protocol where
+you read some requests from a TCP stream, and each request is a JSON
+array, without any separation between them (in fact, it is often useful to
+use newlines as "separators", as these get interpreted as whitespace at
+the start of the JSON text, which makes it possible to test said protocol
+with C<telnet>...).
+
+Here is how you'd do it (it is trivial to write this in an event-based
+manner):
+
+   my $json = new JSON::XS;
+
+   # read some data from the socket
+   while (sysread $socket, my $buf, 4096) {
+
+      # split and decode as many requests as possible
+      for my $request ($json->incr_parse ($buf)) {
+         # act on the $request
+      }
+   }
+
+Another complicated example: Assume you have a string with JSON objects
+or arrays, all separated by (optional) comma characters (e.g. C<[1],[2],
+[3]>). To parse them, we have to skip the commas between the JSON texts,
+and here is where the lvalue-ness of C<incr_text> comes in useful:
+
+   my $text = "[1],[2], [3]";
+   my $json = new JSON::XS;
+
+   # void context, so no parsing done
+   $json->incr_parse ($text);
+
+   # now extract as many objects as possible. note the
+   # use of scalar context so incr_text can be called.
+   while (my $obj = $json->incr_parse) {
+      # do something with $obj
+
+      # now skip the optional comma
+      $json->incr_text =~ s/^ \s* , //x;
+   }
+
+Now lets go for a very complex example: Assume that you have a gigantic
+JSON array-of-objects, many gigabytes in size, and you want to parse it,
+but you cannot load it into memory fully (this has actually happened in
+the real world :).
+
+Well, you lost, you have to implement your own JSON parser. But JSON::XS
+can still help you: You implement a (very simple) array parser and let
+JSON decode the array elements, which are all full JSON objects on their
+own (this wouldn't work if the array elements could be JSON numbers, for
+example):
+
+   my $json = new JSON::XS;
+
+   # open the monster
+   open my $fh, "<bigfile.json"
+      or die "bigfile: $!";
+
+   # first parse the initial "["
+   for (;;) {
+      sysread $fh, my $buf, 65536
+         or die "read error: $!";
+      $json->incr_parse ($buf); # void context, so no parsing
+
+      # Exit the loop once we found and removed(!) the initial "[".
+      # In essence, we are (ab-)using the $json object as a simple scalar
+      # we append data to.
+      last if $json->incr_text =~ s/^ \s* \[ //x;
+   }
+
+   # now we have the skipped the initial "[", so continue
+   # parsing all the elements.
+   for (;;) {
+      # in this loop we read data until we got a single JSON object
+      for (;;) {
+         if (my $obj = $json->incr_parse) {
+            # do something with $obj
+            last;
+         }
+
+         # add more data
+         sysread $fh, my $buf, 65536
+            or die "read error: $!";
+         $json->incr_parse ($buf); # void context, so no parsing
+      }
+
+      # in this loop we read data until we either found and parsed the
+      # separating "," between elements, or the final "]"
+      for (;;) {
+         # first skip whitespace
+         $json->incr_text =~ s/^\s*//;
+
+         # if we find "]", we are done
+         if ($json->incr_text =~ s/^\]//) {
+            print "finished.\n";
+            exit;
+         }
+
+         # if we find ",", we can continue with the next element
+         if ($json->incr_text =~ s/^,//) {
+            last;
+         }
+
+         # if we find anything else, we have a parse error!
+         if (length $json->incr_text) {
+            die "parse error near ", $json->incr_text;
+         }
+
+         # else add more data
+         sysread $fh, my $buf, 65536
+            or die "read error: $!";
+         $json->incr_parse ($buf); # void context, so no parsing
+      }
+
+This is a complex example, but most of the complexity comes from the fact
+that we are trying to be correct (bear with me if I am wrong, I never ran
+the above example :).
+
+
+
+=head1 MAPPING
+
+This section describes how JSON::XS maps Perl values to JSON values and
+vice versa. These mappings are designed to "do the right thing" in most
+circumstances automatically, preserving round-tripping characteristics
+(what you put in comes out as something equivalent).
+
+For the more enlightened: note that in the following descriptions,
+lowercase I<perl> refers to the Perl interpreter, while uppercase I<Perl>
+refers to the abstract Perl language itself.
+
+
+=head2 JSON -> PERL
+
+=over 4
+
+=item object
+
+A JSON object becomes a reference to a hash in Perl. No ordering of object
+keys is preserved (JSON does not preserve object key ordering itself).
+
+=item array
+
+A JSON array becomes a reference to an array in Perl.
+
+=item string
+
+A JSON string becomes a string scalar in Perl - Unicode codepoints in JSON
+are represented by the same codepoints in the Perl string, so no manual
+decoding is necessary.
+
+=item number
+
+A JSON number becomes either an integer, numeric (floating point) or
+string scalar in perl, depending on its range and any fractional parts. On
+the Perl level, there is no difference between those as Perl handles all
+the conversion details, but an integer may take slightly less memory and
+might represent more values exactly than floating point numbers.
+
+If the number consists of digits only, JSON::XS will try to represent
+it as an integer value. If that fails, it will try to represent it as
+a numeric (floating point) value if that is possible without loss of
+precision. Otherwise it will preserve the number as a string value (in
+which case you lose roundtripping ability, as the JSON number will be
+re-encoded to a JSON string).
+
+Numbers containing a fractional or exponential part will always be
+represented as numeric (floating point) values, possibly at a loss of
+precision (in which case you might lose perfect roundtripping ability, but
+the JSON number will still be re-encoded as a JSON number).
+
+Note that precision is not accuracy - binary floating point values cannot
+represent most decimal fractions exactly, and when converting from and to
+floating point, JSON::XS only guarantees precision up to but not including
+the least significant bit.
+
+=item true, false
+
+These JSON atoms become C<Types::Serialiser::true> and
+C<Types::Serialiser::false>, respectively. They are overloaded to act
+almost exactly like the numbers C<1> and C<0>. You can check whether
+a scalar is a JSON boolean by using the C<Types::Serialiser::is_bool>
+function (after C<use Types::Serialier>, of course).
+
+=item null
+
+A JSON null atom becomes C<undef> in Perl.
+
+=item shell-style comments (C<< # I<text> >>)
+
+As a nonstandard extension to the JSON syntax that is enabled by the
+C<relaxed> setting, shell-style comments are allowed. They can start
+anywhere outside strings and go till the end of the line.
+
+=item tagged values (C<< (I<tag>)I<value> >>).
+
+Another nonstandard extension to the JSON syntax, enabled with the
+C<allow_tags> setting, are tagged values. In this implementation, the
+I<tag> must be a perl package/class name encoded as a JSON string, and the
+I<value> must be a JSON array encoding optional constructor arguments.
+
+See L<OBJECT SERIALISATION>, below, for details.
+
+=back
+
+
+=head2 PERL -> JSON
+
+The mapping from Perl to JSON is slightly more difficult, as Perl is a
+truly typeless language, so we can only guess which JSON type is meant by
+a Perl value.
+
+=over 4
+
+=item hash references
+
+Perl hash references become JSON objects. As there is no inherent
+ordering in hash keys (or JSON objects), they will usually be encoded
+in a pseudo-random order. JSON::XS can optionally sort the hash keys
+(determined by the I<canonical> flag), so the same datastructure will
+serialise to the same JSON text (given same settings and version of
+JSON::XS), but this incurs a runtime overhead and is only rarely useful,
+e.g. when you want to compare some JSON text against another for equality.
+
+=item array references
+
+Perl array references become JSON arrays.
+
+=item other references
+
+Other unblessed references are generally not allowed and will cause an
+exception to be thrown, except for references to the integers C<0> and
+C<1>, which get turned into C<false> and C<true> atoms in JSON.
+
+Since C<JSON::XS> uses the boolean model from L<Types::Serialiser>, you
+can also C<use Types::Serialiser> and then use C<Types::Serialiser::false>
+and C<Types::Serialiser::true> to improve readability.
+
+   use Types::Serialiser;
+   encode_json [\0, Types::Serialiser::true]      # yields [false,true]
+
+=item Types::Serialiser::true, Types::Serialiser::false
+
+These special values from the L<Types::Serialiser> module become JSON true
+and JSON false values, respectively. You can also use C<\1> and C<\0>
+directly if you want.
+
+=item blessed objects
+
+Blessed objects are not directly representable in JSON, but C<JSON::XS>
+allows various ways of handling objects. See L<OBJECT SERIALISATION>,
+below, for details.
+
+=item simple scalars
+
+Simple Perl scalars (any scalar that is not a reference) are the most
+difficult objects to encode: JSON::XS will encode undefined scalars as
+JSON C<null> values, scalars that have last been used in a string context
+before encoding as JSON strings, and anything else as number value:
+
+   # dump as number
+   encode_json [2]                      # yields [2]
+   encode_json [-3.0e17]                # yields [-3e+17]
+   my $value = 5; encode_json [$value]  # yields [5]
+
+   # used as string, so dump as string
+   print $value;
+   encode_json [$value]                 # yields ["5"]
+
+   # undef becomes null
+   encode_json [undef]                  # yields [null]
+
+You can force the type to be a JSON string by stringifying it:
+
+   my $x = 3.1; # some variable containing a number
+   "$x";        # stringified
+   $x .= "";    # another, more awkward way to stringify
+   print $x;    # perl does it for you, too, quite often
+
+You can force the type to be a JSON number by numifying it:
+
+   my $x = "3"; # some variable containing a string
+   $x += 0;     # numify it, ensuring it will be dumped as a number
+   $x *= 1;     # same thing, the choice is yours.
+
+You can not currently force the type in other, less obscure, ways. Tell me
+if you need this capability (but don't forget to explain why it's needed
+:).
+
+Note that numerical precision has the same meaning as under Perl (so
+binary to decimal conversion follows the same rules as in Perl, which
+can differ to other languages). Also, your perl interpreter might expose
+extensions to the floating point numbers of your platform, such as
+infinities or NaN's - these cannot be represented in JSON, and it is an
+error to pass those in.
+
+=back
+
+=head2 OBJECT SERIALISATION
+
+As JSON cannot directly represent Perl objects, you have to choose between
+a pure JSON representation (without the ability to deserialise the object
+automatically again), and a nonstandard extension to the JSON syntax,
+tagged values.
+
+=head3 SERIALISATION
+
+What happens when C<JSON::XS> encounters a Perl object depends on the
+C<allow_blessed>, C<convert_blessed> and C<allow_tags> settings, which are
+used in this order:
+
+=over 4
+
+=item 1. C<allow_tags> is enabled and the object has a C<FREEZE> method.
+
+In this case, C<JSON::XS> uses the L<Types::Serialiser> object
+serialisation protocol to create a tagged JSON value, using a nonstandard
+extension to the JSON syntax.
+
+This works by invoking the C<FREEZE> method on the object, with the first
+argument being the object to serialise, and the second argument being the
+constant string C<JSON> to distinguish it from other serialisers.
+
+The C<FREEZE> method can return any number of values (i.e. zero or
+more). These values and the paclkage/classname of the object will then be
+encoded as a tagged JSON value in the following format:
+
+   ("classname")[FREEZE return values...]
+
+e.g.:
+
+   ("URI")["http://www.google.com/"]
+   ("MyDate")[2013,10,29]
+   ("ImageData::JPEG")["Z3...VlCg=="]
+
+For example, the hypothetical C<My::Object> C<FREEZE> method might use the
+objects C<type> and C<id> members to encode the object:
+
+   sub My::Object::FREEZE {
+      my ($self, $serialiser) = @_;
+
+      ($self->{type}, $self->{id})
+   }
+
+=item 2. C<convert_blessed> is enabled and the object has a C<TO_JSON> method.
+
+In this case, the C<TO_JSON> method of the object is invoked in scalar
+context. It must return a single scalar that can be directly encoded into
+JSON. This scalar replaces the object in the JSON text.
+
+For example, the following C<TO_JSON> method will convert all L<URI>
+objects to JSON strings when serialised. The fatc that these values
+originally were L<URI> objects is lost.
+
+   sub URI::TO_JSON {
+      my ($uri) = @_;
+      $uri->as_string
+   }
+
+=item 3. C<allow_blessed> is enabled.
+
+The object will be serialised as a JSON null value.
+
+=item 4. none of the above
+
+If none of the settings are enabled or the respective methods are missing,
+C<JSON::XS> throws an exception.
+
+=back
+
+=head3 DESERIALISATION
+
+For deserialisation there are only two cases to consider: either
+nonstandard tagging was used, in which case C<allow_tags> decides,
+or objects cannot be automatically be deserialised, in which
+case you can use postprocessing or the C<filter_json_object> or
+C<filter_json_single_key_object> callbacks to get some real objects our of
+your JSON.
+
+This section only considers the tagged value case: I a tagged JSON object
+is encountered during decoding and C<allow_tags> is disabled, a parse
+error will result (as if tagged values were not part of the grammar).
+
+If C<allow_tags> is enabled, C<JSON::XS> will look up the C<THAW> method
+of the package/classname used during serialisation (it will not attempt
+to load the package as a Perl module). If there is no such method, the
+decoding will fail with an error.
+
+Otherwise, the C<THAW> method is invoked with the classname as first
+argument, the constant string C<JSON> as second argument, and all the
+values from the JSON array (the values originally returned by the
+C<FREEZE> method) as remaining arguments.
+
+The method must then return the object. While technically you can return
+any Perl scalar, you might have to enable the C<enable_nonref> setting to
+make that work in all cases, so better return an actual blessed reference.
+
+As an example, let's implement a C<THAW> function that regenerates the
+C<My::Object> from the C<FREEZE> example earlier:
+
+   sub My::Object::THAW {
+      my ($class, $serialiser, $type, $id) = @_;
+
+      $class->new (type => $type, id => $id)
+   }
+
+
+=head1 ENCODING/CODESET FLAG NOTES
+
+The interested reader might have seen a number of flags that signify
+encodings or codesets - C<utf8>, C<latin1> and C<ascii>. There seems to be
+some confusion on what these do, so here is a short comparison:
+
+C<utf8> controls whether the JSON text created by C<encode> (and expected
+by C<decode>) is UTF-8 encoded or not, while C<latin1> and C<ascii> only
+control whether C<encode> escapes character values outside their respective
+codeset range. Neither of these flags conflict with each other, although
+some combinations make less sense than others.
+
+Care has been taken to make all flags symmetrical with respect to
+C<encode> and C<decode>, that is, texts encoded with any combination of
+these flag values will be correctly decoded when the same flags are used
+- in general, if you use different flag settings while encoding vs. when
+decoding you likely have a bug somewhere.
+
+Below comes a verbose discussion of these flags. Note that a "codeset" is
+simply an abstract set of character-codepoint pairs, while an encoding
+takes those codepoint numbers and I<encodes> them, in our case into
+octets. Unicode is (among other things) a codeset, UTF-8 is an encoding,
+and ISO-8859-1 (= latin 1) and ASCII are both codesets I<and> encodings at
+the same time, which can be confusing.
+
+=over 4
+
+=item C<utf8> flag disabled
+
+When C<utf8> is disabled (the default), then C<encode>/C<decode> generate
+and expect Unicode strings, that is, characters with high ordinal Unicode
+values (> 255) will be encoded as such characters, and likewise such
+characters are decoded as-is, no changes to them will be done, except
+"(re-)interpreting" them as Unicode codepoints or Unicode characters,
+respectively (to Perl, these are the same thing in strings unless you do
+funny/weird/dumb stuff).
+
+This is useful when you want to do the encoding yourself (e.g. when you
+want to have UTF-16 encoded JSON texts) or when some other layer does
+the encoding for you (for example, when printing to a terminal using a
+filehandle that transparently encodes to UTF-8 you certainly do NOT want
+to UTF-8 encode your data first and have Perl encode it another time).
+
+=item C<utf8> flag enabled
+
+If the C<utf8>-flag is enabled, C<encode>/C<decode> will encode all
+characters using the corresponding UTF-8 multi-byte sequence, and will
+expect your input strings to be encoded as UTF-8, that is, no "character"
+of the input string must have any value > 255, as UTF-8 does not allow
+that.
+
+The C<utf8> flag therefore switches between two modes: disabled means you
+will get a Unicode string in Perl, enabled means you get an UTF-8 encoded
+octet/binary string in Perl.
+
+=item C<latin1> or C<ascii> flags enabled
+
+With C<latin1> (or C<ascii>) enabled, C<encode> will escape characters
+with ordinal values > 255 (> 127 with C<ascii>) and encode the remaining
+characters as specified by the C<utf8> flag.
+
+If C<utf8> is disabled, then the result is also correctly encoded in those
+character sets (as both are proper subsets of Unicode, meaning that a
+Unicode string with all character values < 256 is the same thing as a
+ISO-8859-1 string, and a Unicode string with all character values < 128 is
+the same thing as an ASCII string in Perl).
+
+If C<utf8> is enabled, you still get a correct UTF-8-encoded string,
+regardless of these flags, just some more characters will be escaped using
+C<\uXXXX> then before.
+
+Note that ISO-8859-1-I<encoded> strings are not compatible with UTF-8
+encoding, while ASCII-encoded strings are. That is because the ISO-8859-1
+encoding is NOT a subset of UTF-8 (despite the ISO-8859-1 I<codeset> being
+a subset of Unicode), while ASCII is.
+
+Surprisingly, C<decode> will ignore these flags and so treat all input
+values as governed by the C<utf8> flag. If it is disabled, this allows you
+to decode ISO-8859-1- and ASCII-encoded strings, as both strict subsets of
+Unicode. If it is enabled, you can correctly decode UTF-8 encoded strings.
+
+So neither C<latin1> nor C<ascii> are incompatible with the C<utf8> flag -
+they only govern when the JSON output engine escapes a character or not.
+
+The main use for C<latin1> is to relatively efficiently store binary data
+as JSON, at the expense of breaking compatibility with most JSON decoders.
+
+The main use for C<ascii> is to force the output to not contain characters
+with values > 127, which means you can interpret the resulting string
+as UTF-8, ISO-8859-1, ASCII, KOI8-R or most about any character set and
+8-bit-encoding, and still get the same data structure back. This is useful
+when your channel for JSON transfer is not 8-bit clean or the encoding
+might be mangled in between (e.g. in mail), and works because ASCII is a
+proper subset of most 8-bit and multibyte encodings in use in the world.
+
+=back
+
+
+=head2 JSON and ECMAscript
+
+JSON syntax is based on how literals are represented in javascript (the
+not-standardised predecessor of ECMAscript) which is presumably why it is
+called "JavaScript Object Notation".
+
+However, JSON is not a subset (and also not a superset of course) of
+ECMAscript (the standard) or javascript (whatever browsers actually
+implement).
+
+If you want to use javascript's C<eval> function to "parse" JSON, you
+might run into parse errors for valid JSON texts, or the resulting data
+structure might not be queryable:
+
+One of the problems is that U+2028 and U+2029 are valid characters inside
+JSON strings, but are not allowed in ECMAscript string literals, so the
+following Perl fragment will not output something that can be guaranteed
+to be parsable by javascript's C<eval>:
+
+   use JSON::XS;
+
+   print encode_json [chr 0x2028];
+
+The right fix for this is to use a proper JSON parser in your javascript
+programs, and not rely on C<eval> (see for example Douglas Crockford's
+F<json2.js> parser).
+
+If this is not an option, you can, as a stop-gap measure, simply encode to
+ASCII-only JSON:
+
+   use JSON::XS;
+
+   print JSON::XS->new->ascii->encode ([chr 0x2028]);
+
+Note that this will enlarge the resulting JSON text quite a bit if you
+have many non-ASCII characters. You might be tempted to run some regexes
+to only escape U+2028 and U+2029, e.g.:
+
+   # DO NOT USE THIS!
+   my $json = JSON::XS->new->utf8->encode ([chr 0x2028]);
+   $json =~ s/\xe2\x80\xa8/\\u2028/g; # escape U+2028
+   $json =~ s/\xe2\x80\xa9/\\u2029/g; # escape U+2029
+   print $json;
+
+Note that I<this is a bad idea>: the above only works for U+2028 and
+U+2029 and thus only for fully ECMAscript-compliant parsers. Many existing
+javascript implementations, however, have issues with other characters as
+well - using C<eval> naively simply I<will> cause problems.
+
+Another problem is that some javascript implementations reserve
+some property names for their own purposes (which probably makes
+them non-ECMAscript-compliant). For example, Iceweasel reserves the
+C<__proto__> property name for its own purposes.
+
+If that is a problem, you could parse try to filter the resulting JSON
+output for these property strings, e.g.:
+
+   $json =~ s/"__proto__"\s*:/"__proto__renamed":/g;
+
+This works because C<__proto__> is not valid outside of strings, so every
+occurrence of C<"__proto__"\s*:> must be a string used as property name.
+
+If you know of other incompatibilities, please let me know.
+
+
+=head2 JSON and YAML
+
+You often hear that JSON is a subset of YAML. This is, however, a mass
+hysteria(*) and very far from the truth (as of the time of this writing),
+so let me state it clearly: I<in general, there is no way to configure
+JSON::XS to output a data structure as valid YAML> that works in all
+cases.
+
+If you really must use JSON::XS to generate YAML, you should use this
+algorithm (subject to change in future versions):
+
+   my $to_yaml = JSON::XS->new->utf8->space_after (1);
+   my $yaml = $to_yaml->encode ($ref) . "\n";
+
+This will I<usually> generate JSON texts that also parse as valid
+YAML. Please note that YAML has hardcoded limits on (simple) object key
+lengths that JSON doesn't have and also has different and incompatible
+unicode character escape syntax, so you should make sure that your hash
+keys are noticeably shorter than the 1024 "stream characters" YAML allows
+and that you do not have characters with codepoint values outside the
+Unicode BMP (basic multilingual page). YAML also does not allow C<\/>
+sequences in strings (which JSON::XS does not I<currently> generate, but
+other JSON generators might).
+
+There might be other incompatibilities that I am not aware of (or the YAML
+specification has been changed yet again - it does so quite often). In
+general you should not try to generate YAML with a JSON generator or vice
+versa, or try to parse JSON with a YAML parser or vice versa: chances are
+high that you will run into severe interoperability problems when you
+least expect it.
+
+=over 4
+
+=item (*)
+
+I have been pressured multiple times by Brian Ingerson (one of the
+authors of the YAML specification) to remove this paragraph, despite him
+acknowledging that the actual incompatibilities exist. As I was personally
+bitten by this "JSON is YAML" lie, I refused and said I will continue to
+educate people about these issues, so others do not run into the same
+problem again and again. After this, Brian called me a (quote)I<complete
+and worthless idiot>(unquote).
+
+In my opinion, instead of pressuring and insulting people who actually
+clarify issues with YAML and the wrong statements of some of its
+proponents, I would kindly suggest reading the JSON spec (which is not
+that difficult or long) and finally make YAML compatible to it, and
+educating users about the changes, instead of spreading lies about the
+real compatibility for many I<years> and trying to silence people who
+point out that it isn't true.
+
+Addendum/2009: the YAML 1.2 spec is still incompatible with JSON, even
+though the incompatibilities have been documented (and are known to Brian)
+for many years and the spec makes explicit claims that YAML is a superset
+of JSON. It would be so easy to fix, but apparently, bullying people and
+corrupting userdata is so much easier.
+
+=back
+
+
+=head2 SPEED
+
+It seems that JSON::XS is surprisingly fast, as shown in the following
+tables. They have been generated with the help of the C<eg/bench> program
+in the JSON::XS distribution, to make it easy to compare on your own
+system.
+
+First comes a comparison between various modules using
+a very short single-line JSON string (also available at
+L<http://dist.schmorp.de/misc/json/short.json>).
+
+   {"method": "handleMessage", "params": ["user1",
+   "we were just talking"], "id": null, "array":[1,11,234,-5,1e5,1e7,
+   1,  0]}
+
+It shows the number of encodes/decodes per second (JSON::XS uses
+the functional interface, while JSON::XS/2 uses the OO interface
+with pretty-printing and hashkey sorting enabled, JSON::XS/3 enables
+shrink. JSON::DWIW/DS uses the deserialise function, while JSON::DWIW::FJ
+uses the from_json method). Higher is better:
+
+   module        |     encode |     decode |
+   --------------|------------|------------|
+   JSON::DWIW/DS |  86302.551 | 102300.098 |
+   JSON::DWIW/FJ |  86302.551 |  75983.768 |
+   JSON::PP      |  15827.562 |   6638.658 |
+   JSON::Syck    |  63358.066 |  47662.545 |
+   JSON::XS      | 511500.488 | 511500.488 |
+   JSON::XS/2    | 291271.111 | 388361.481 |
+   JSON::XS/3    | 361577.931 | 361577.931 |
+   Storable      |  66788.280 | 265462.278 |
+   --------------+------------+------------+
+
+That is, JSON::XS is almost six times faster than JSON::DWIW on encoding,
+about five times faster on decoding, and over thirty to seventy times
+faster than JSON's pure perl implementation. It also compares favourably
+to Storable for small amounts of data.
+
+Using a longer test string (roughly 18KB, generated from Yahoo! Locals
+search API (L<http://dist.schmorp.de/misc/json/long.json>).
+
+   module        |     encode |     decode |
+   --------------|------------|------------|
+   JSON::DWIW/DS |   1647.927 |   2673.916 |
+   JSON::DWIW/FJ |   1630.249 |   2596.128 |
+   JSON::PP      |    400.640 |     62.311 |
+   JSON::Syck    |   1481.040 |   1524.869 |
+   JSON::XS      |  20661.596 |   9541.183 |
+   JSON::XS/2    |  10683.403 |   9416.938 |
+   JSON::XS/3    |  20661.596 |   9400.054 |
+   Storable      |  19765.806 |  10000.725 |
+   --------------+------------+------------+
+
+Again, JSON::XS leads by far (except for Storable which non-surprisingly
+decodes a bit faster).
+
+On large strings containing lots of high Unicode characters, some modules
+(such as JSON::PC) seem to decode faster than JSON::XS, but the result
+will be broken due to missing (or wrong) Unicode handling. Others refuse
+to decode or encode properly, so it was impossible to prepare a fair
+comparison table for that case.
+
+
+=head1 SECURITY CONSIDERATIONS
+
+When you are using JSON in a protocol, talking to untrusted potentially
+hostile creatures requires relatively few measures.
+
+First of all, your JSON decoder should be secure, that is, should not have
+any buffer overflows. Obviously, this module should ensure that and I am
+trying hard on making that true, but you never know.
+
+Second, you need to avoid resource-starving attacks. That means you should
+limit the size of JSON texts you accept, or make sure then when your
+resources run out, that's just fine (e.g. by using a separate process that
+can crash safely). The size of a JSON text in octets or characters is
+usually a good indication of the size of the resources required to decode
+it into a Perl structure. While JSON::XS can check the size of the JSON
+text, it might be too late when you already have it in memory, so you
+might want to check the size before you accept the string.
+
+Third, JSON::XS recurses using the C stack when decoding objects and
+arrays. The C stack is a limited resource: for instance, on my amd64
+machine with 8MB of stack size I can decode around 180k nested arrays but
+only 14k nested JSON objects (due to perl itself recursing deeply on croak
+to free the temporary). If that is exceeded, the program crashes. To be
+conservative, the default nesting limit is set to 512. If your process
+has a smaller stack, you should adjust this setting accordingly with the
+C<max_depth> method.
+
+Something else could bomb you, too, that I forgot to think of. In that
+case, you get to keep the pieces. I am always open for hints, though...
+
+Also keep in mind that JSON::XS might leak contents of your Perl data
+structures in its error messages, so when you serialise sensitive
+information you might want to make sure that exceptions thrown by JSON::XS
+will not end up in front of untrusted eyes.
+
+If you are using JSON::XS to return packets to consumption
+by JavaScript scripts in a browser you should have a look at
+L<http://blog.archive.jpsykes.com/47/practical-csrf-and-json-security/> to
+see whether you are vulnerable to some common attack vectors (which really
+are browser design bugs, but it is still you who will have to deal with
+it, as major browser developers care only for features, not about getting
+security right).
+
+
+=head1 "OLD" VS. "NEW" JSON (RFC 4627 VS. RFC 7159)
+
+TL;DR: Due to security concerns, JSON::XS will not allow scalar data in
+JSON texts by default - you need to create your own JSON::XS object and
+enable C<allow_nonref>:
+
+
+   my $json = JSON::XS->new->allow_nonref;
+
+   $text = $json->encode ($data);
+   $data = $json->decode ($text);
+
+The long version: JSON being an important and supposedly stable format,
+the IETF standardised it as RFC 4627 in 2006. Unfortunately, the inventor
+of JSON, Dougles Crockford, unilaterally changed the definition of JSON in
+javascript. Rather than create a fork, the IETF decided to standardise the
+new syntax (apparently, so Iw as told, without finding it very amusing).
+
+The biggest difference between thed original JSON and the new JSON is that
+the new JSON supports scalars (anything other than arrays and objects) at
+the toplevel of a JSON text. While this is strictly backwards compatible
+to older versions, it breaks a number of protocols that relied on sending
+JSON back-to-back, and is a minor security concern.
+
+For example, imagine you have two banks communicating, and on one side,
+trhe JSON coder gets upgraded. Two messages, such as C<10> and C<1000>
+might then be confused to mean C<101000>, something that couldn't happen
+in the original JSON, because niether of these messages would be valid
+JSON.
+
+If one side accepts these messages, then an upgrade in the coder on either
+side could result in this becoming exploitable.
+
+This module has always allowed these messages as an optional extension, by
+default disabled. The security concerns are the reason why the default is
+still disabled, but future versions might/will likely upgrade to the newer
+RFC as default format, so you are advised to check your implementation
+and/or override the default with C<< ->allow_nonref (0) >> to ensure that
+future versions are safe.
+
+
+=head1 INTEROPERABILITY WITH OTHER MODULES
+
+C<JSON::XS> uses the L<Types::Serialiser> module to provide boolean
+constants. That means that the JSON true and false values will be
+comaptible to true and false values of other modules that do the same,
+such as L<JSON::PP> and L<CBOR::XS>.
+
+
+=head1 INTEROPERABILITY WITH OTHER JSON DECODERS
+
+As long as you only serialise data that can be directly expressed in JSON,
+C<JSON::XS> is incapable of generating invalid JSON output (modulo bugs,
+but C<JSON::XS> has found more bugs in the official JSON testsuite (1)
+than the official JSON testsuite has found in C<JSON::XS> (0)).
+
+When you have trouble decoding JSON generated by this module using other
+decoders, then it is very likely that you have an encoding mismatch or the
+other decoder is broken.
+
+When decoding, C<JSON::XS> is strict by default and will likely catch all
+errors. There are currently two settings that change this: C<relaxed>
+makes C<JSON::XS> accept (but not generate) some non-standard extensions,
+and C<allow_tags> will allow you to encode and decode Perl objects, at the
+cost of not outputting valid JSON anymore.
+
+=head2 TAGGED VALUE SYNTAX AND STANDARD JSON EN/DECODERS
+
+When you use C<allow_tags> to use the extended (and also nonstandard and
+invalid) JSON syntax for serialised objects, and you still want to decode
+the generated When you want to serialise objects, you can run a regex
+to replace the tagged syntax by standard JSON arrays (it only works for
+"normal" package names without comma, newlines or single colons). First,
+the readable Perl version:
+
+   # if your FREEZE methods return no values, you need this replace first:
+   $json =~ s/\( \s* (" (?: [^\\":,]+|\\.|::)* ") \s* \) \s* \[\s*\]/[$1]/gx;
+
+   # this works for non-empty constructor arg lists:
+   $json =~ s/\( \s* (" (?: [^\\":,]+|\\.|::)* ") \s* \) \s* \[/[$1,/gx;
+
+And here is a less readable version that is easy to adapt to other
+languages:
+
+   $json =~ s/\(\s*("([^\\":,]+|\\.|::)*")\s*\)\s*\[/[$1,/g;
+
+Here is an ECMAScript version (same regex):
+
+   json = json.replace (/\(\s*("([^\\":,]+|\\.|::)*")\s*\)\s*\[/g, "[$1,");
+
+Since this syntax converts to standard JSON arrays, it might be hard to
+distinguish serialised objects from normal arrays. You can prepend a
+"magic number" as first array element to reduce chances of a collision:
+
+   $json =~ s/\(\s*("([^\\":,]+|\\.|::)*")\s*\)\s*\[/["XU1peReLzT4ggEllLanBYq4G9VzliwKF",$1,/g;
+
+And after decoding the JSON text, you could walk the data
+structure looking for arrays with a first element of
+C<XU1peReLzT4ggEllLanBYq4G9VzliwKF>.
+
+The same approach can be used to create the tagged format with another
+encoder. First, you create an array with the magic string as first member,
+the classname as second, and constructor arguments last, encode it as part
+of your JSON structure, and then:
+
+   $json =~ s/\[\s*"XU1peReLzT4ggEllLanBYq4G9VzliwKF"\s*,\s*("([^\\":,]+|\\.|::)*")\s*,/($1)[/g;
+
+Again, this has some limitations - the magic string must not be encoded
+with character escapes, and the constructor arguments must be non-empty.
+
+
+=head1 RFC7159
+
+Since this module was written, Google has written a new JSON RFC, RFC 7159
+(and RFC7158). Unfortunately, this RFC breaks compatibility with both the
+original JSON specification on www.json.org and RFC4627.
+
+As far as I can see, you can get partial compatibility when parsing by
+using C<< ->allow_nonref >>. However, consider the security implications
+of doing so.
+
+I haven't decided yet when to break compatibility with RFC4627 by default
+(and potentially leave applications insecure) and change the default to
+follow RFC7159, but application authors are well advised to call C<<
+->allow_nonref(0) >> even if this is the current default, if they cannot
+handle non-reference values, in preparation for the day when the default
+will change.
+
+
+=head1 (I-)THREADS
+
+This module is I<not> guaranteed to be ithread (or MULTIPLICITY-) safe
+and there are no plans to change this. Note that perl's builtin so-called
+theeads/ithreads are officially deprecated and should not be used.
+
+
+=head1 THE PERILS OF SETLOCALE
+
+Sometimes people avoid the Perl locale support and directly call the
+system's setlocale function with C<LC_ALL>.
+
+This breaks both perl and modules such as JSON::XS, as stringification of
+numbers no longer works correctly (e.g. C<$x = 0.1; print "$x"+1> might
+print C<1>, and JSON::XS might output illegal JSON as JSON::XS relies on
+perl to stringify numbers).
+
+The solution is simple: don't call C<setlocale>, or use it for only those
+categories you need, such as C<LC_MESSAGES> or C<LC_CTYPE>.
+
+If you need C<LC_NUMERIC>, you should enable it only around the code that
+actually needs it (avoiding stringification of numbers), and restore it
+afterwards.
+
+
+=head1 BUGS
+
+While the goal of this module is to be correct, that unfortunately does
+not mean it's bug-free, only that I think its design is bug-free. If you
+keep reporting bugs they will be fixed swiftly, though.
+
+Please refrain from using rt.cpan.org or any other bug reporting
+service. I put the contact address into my modules for a reason.
+
+=cut
+
+BEGIN {
+   *true    = \$Types::Serialiser::true;
+   *true    = \&Types::Serialiser::true;
+   *false   = \$Types::Serialiser::false;
+   *false   = \&Types::Serialiser::false;
+   *is_bool = \&Types::Serialiser::is_bool;
+
+   *JSON::XS::Boolean:: = *Types::Serialiser::Boolean::;
+}
+
+XSLoader::load "JSON::XS", $VERSION;
+
+=head1 SEE ALSO
+
+The F<json_xs> command line utility for quick experiments.
+
+=head1 AUTHOR
+
+ Marc Lehmann <schmorp@schmorp.de>
+ http://home.schmorp.de/
+
+=cut
+
+1
+
diff --git a/Master/tlpkg/tlperl/site/lib/JSON/XS/Boolean.pm b/Master/tlpkg/tlperl/site/lib/JSON/XS/Boolean.pm
new file mode 100644
index 00000000000..67f704b2a72
--- /dev/null
+++ b/Master/tlpkg/tlperl/site/lib/JSON/XS/Boolean.pm
@@ -0,0 +1,31 @@
+=head1 NAME
+
+JSON::XS::Boolean - dummy module providing JSON::XS::Boolean
+
+=head1 SYNOPSIS
+
+ # do not "use" yourself
+
+=head1 DESCRIPTION
+
+This module exists only to provide overload resolution for Storable and
+similar modules. It's only needed for compatibility with data serialised
+(by other modules such as Storable) that was decoded by JSON::XS versions
+before 3.0.
+
+Since 3.0, JSON::PP::Boolean has replaced it. Support for
+JSON::XS::Boolean will be removed in a future release.
+
+=cut
+
+use JSON::XS ();
+
+1;
+
+=head1 AUTHOR
+
+ Marc Lehmann <schmorp@schmorp.de>
+ http://home.schmorp.de/
+
+=cut
+
diff --git a/Master/tlpkg/tlperl/site/lib/JSON/backportPP.pm b/Master/tlpkg/tlperl/site/lib/JSON/backportPP.pm
new file mode 100644
index 00000000000..36132a3307b
--- /dev/null
+++ b/Master/tlpkg/tlperl/site/lib/JSON/backportPP.pm
@@ -0,0 +1,2854 @@
+package # This is JSON::backportPP
+    JSON::PP;
+
+# JSON-2.0
+
+use 5.005;
+use strict;
+
+use Exporter ();
+BEGIN { @JSON::backportPP::ISA = ('Exporter') }
+
+use overload ();
+use JSON::backportPP::Boolean;
+
+use Carp ();
+#use Devel::Peek;
+
+$JSON::backportPP::VERSION = '2.94';
+
+@JSON::PP::EXPORT = qw(encode_json decode_json from_json to_json);
+
+# instead of hash-access, i tried index-access for speed.
+# but this method is not faster than what i expected. so it will be changed.
+
+use constant P_ASCII                => 0;
+use constant P_LATIN1               => 1;
+use constant P_UTF8                 => 2;
+use constant P_INDENT               => 3;
+use constant P_CANONICAL            => 4;
+use constant P_SPACE_BEFORE         => 5;
+use constant P_SPACE_AFTER          => 6;
+use constant P_ALLOW_NONREF         => 7;
+use constant P_SHRINK               => 8;
+use constant P_ALLOW_BLESSED        => 9;
+use constant P_CONVERT_BLESSED      => 10;
+use constant P_RELAXED              => 11;
+
+use constant P_LOOSE                => 12;
+use constant P_ALLOW_BIGNUM         => 13;
+use constant P_ALLOW_BAREKEY        => 14;
+use constant P_ALLOW_SINGLEQUOTE    => 15;
+use constant P_ESCAPE_SLASH         => 16;
+use constant P_AS_NONBLESSED        => 17;
+
+use constant P_ALLOW_UNKNOWN        => 18;
+
+use constant OLD_PERL => $] < 5.008 ? 1 : 0;
+use constant USE_B => 0;
+
+BEGIN {
+if (USE_B) {
+    require B;
+}
+}
+
+BEGIN {
+    my @xs_compati_bit_properties = qw(
+            latin1 ascii utf8 indent canonical space_before space_after allow_nonref shrink
+            allow_blessed convert_blessed relaxed allow_unknown
+    );
+    my @pp_bit_properties = qw(
+            allow_singlequote allow_bignum loose
+            allow_barekey escape_slash as_nonblessed
+    );
+
+    # Perl version check, Unicode handling is enabled?
+    # Helper module sets @JSON::PP::_properties.
+    if ( OLD_PERL ) {
+        my $helper = $] >= 5.006 ? 'JSON::backportPP::Compat5006' : 'JSON::backportPP::Compat5005';
+        eval qq| require $helper |;
+        if ($@) { Carp::croak $@; }
+    }
+
+    for my $name (@xs_compati_bit_properties, @pp_bit_properties) {
+        my $property_id = 'P_' . uc($name);
+
+        eval qq/
+            sub $name {
+                my \$enable = defined \$_[1] ? \$_[1] : 1;
+
+                if (\$enable) {
+                    \$_[0]->{PROPS}->[$property_id] = 1;
+                }
+                else {
+                    \$_[0]->{PROPS}->[$property_id] = 0;
+                }
+
+                \$_[0];
+            }
+
+            sub get_$name {
+                \$_[0]->{PROPS}->[$property_id] ? 1 : '';
+            }
+        /;
+    }
+
+}
+
+
+
+# Functions
+
+my $JSON; # cache
+
+sub encode_json ($) { # encode
+    ($JSON ||= __PACKAGE__->new->utf8)->encode(@_);
+}
+
+
+sub decode_json { # decode
+    ($JSON ||= __PACKAGE__->new->utf8)->decode(@_);
+}
+
+# Obsoleted
+
+sub to_json($) {
+   Carp::croak ("JSON::PP::to_json has been renamed to encode_json.");
+}
+
+
+sub from_json($) {
+   Carp::croak ("JSON::PP::from_json has been renamed to decode_json.");
+}
+
+
+# Methods
+
+sub new {
+    my $class = shift;
+    my $self  = {
+        max_depth   => 512,
+        max_size    => 0,
+        indent_length => 3,
+    };
+
+    bless $self, $class;
+}
+
+
+sub encode {
+    return $_[0]->PP_encode_json($_[1]);
+}
+
+
+sub decode {
+    return $_[0]->PP_decode_json($_[1], 0x00000000);
+}
+
+
+sub decode_prefix {
+    return $_[0]->PP_decode_json($_[1], 0x00000001);
+}
+
+
+# accessor
+
+
+# pretty printing
+
+sub pretty {
+    my ($self, $v) = @_;
+    my $enable = defined $v ? $v : 1;
+
+    if ($enable) { # indent_length(3) for JSON::XS compatibility
+        $self->indent(1)->space_before(1)->space_after(1);
+    }
+    else {
+        $self->indent(0)->space_before(0)->space_after(0);
+    }
+
+    $self;
+}
+
+# etc
+
+sub max_depth {
+    my $max  = defined $_[1] ? $_[1] : 0x80000000;
+    $_[0]->{max_depth} = $max;
+    $_[0];
+}
+
+
+sub get_max_depth { $_[0]->{max_depth}; }
+
+
+sub max_size {
+    my $max  = defined $_[1] ? $_[1] : 0;
+    $_[0]->{max_size} = $max;
+    $_[0];
+}
+
+
+sub get_max_size { $_[0]->{max_size}; }
+
+
+sub filter_json_object {
+    if (defined $_[1] and ref $_[1] eq 'CODE') {
+        $_[0]->{cb_object} = $_[1];
+    } else {
+        delete $_[0]->{cb_object};
+    }
+    $_[0]->{F_HOOK} = ($_[0]->{cb_object} or $_[0]->{cb_sk_object}) ? 1 : 0;
+    $_[0];
+}
+
+sub filter_json_single_key_object {
+    if (@_ == 1 or @_ > 3) {
+        Carp::croak("Usage: JSON::PP::filter_json_single_key_object(self, key, callback = undef)");
+    }
+    if (defined $_[2] and ref $_[2] eq 'CODE') {
+        $_[0]->{cb_sk_object}->{$_[1]} = $_[2];
+    } else {
+        delete $_[0]->{cb_sk_object}->{$_[1]};
+        delete $_[0]->{cb_sk_object} unless %{$_[0]->{cb_sk_object} || {}};
+    }
+    $_[0]->{F_HOOK} = ($_[0]->{cb_object} or $_[0]->{cb_sk_object}) ? 1 : 0;
+    $_[0];
+}
+
+sub indent_length {
+    if (!defined $_[1] or $_[1] > 15 or $_[1] < 0) {
+        Carp::carp "The acceptable range of indent_length() is 0 to 15.";
+    }
+    else {
+        $_[0]->{indent_length} = $_[1];
+    }
+    $_[0];
+}
+
+sub get_indent_length {
+    $_[0]->{indent_length};
+}
+
+sub sort_by {
+    $_[0]->{sort_by} = defined $_[1] ? $_[1] : 1;
+    $_[0];
+}
+
+sub allow_bigint {
+    Carp::carp("allow_bigint() is obsoleted. use allow_bignum() instead.");
+    $_[0]->allow_bignum;
+}
+
+###############################
+
+###
+### Perl => JSON
+###
+
+
+{ # Convert
+
+    my $max_depth;
+    my $indent;
+    my $ascii;
+    my $latin1;
+    my $utf8;
+    my $space_before;
+    my $space_after;
+    my $canonical;
+    my $allow_blessed;
+    my $convert_blessed;
+
+    my $indent_length;
+    my $escape_slash;
+    my $bignum;
+    my $as_nonblessed;
+
+    my $depth;
+    my $indent_count;
+    my $keysort;
+
+
+    sub PP_encode_json {
+        my $self = shift;
+        my $obj  = shift;
+
+        $indent_count = 0;
+        $depth        = 0;
+
+        my $props = $self->{PROPS};
+
+        ($ascii, $latin1, $utf8, $indent, $canonical, $space_before, $space_after, $allow_blessed,
+            $convert_blessed, $escape_slash, $bignum, $as_nonblessed)
+         = @{$props}[P_ASCII .. P_SPACE_AFTER, P_ALLOW_BLESSED, P_CONVERT_BLESSED,
+                    P_ESCAPE_SLASH, P_ALLOW_BIGNUM, P_AS_NONBLESSED];
+
+        ($max_depth, $indent_length) = @{$self}{qw/max_depth indent_length/};
+
+        $keysort = $canonical ? sub { $a cmp $b } : undef;
+
+        if ($self->{sort_by}) {
+            $keysort = ref($self->{sort_by}) eq 'CODE' ? $self->{sort_by}
+                     : $self->{sort_by} =~ /\D+/       ? $self->{sort_by}
+                     : sub { $a cmp $b };
+        }
+
+        encode_error("hash- or arrayref expected (not a simple scalar, use allow_nonref to allow this)")
+             if(!ref $obj and !$props->[ P_ALLOW_NONREF ]);
+
+        my $str  = $self->object_to_json($obj);
+
+        $str .= "\n" if ( $indent ); # JSON::XS 2.26 compatible
+
+        unless ($ascii or $latin1 or $utf8) {
+            utf8::upgrade($str);
+        }
+
+        if ($props->[ P_SHRINK ]) {
+            utf8::downgrade($str, 1);
+        }
+
+        return $str;
+    }
+
+
+    sub object_to_json {
+        my ($self, $obj) = @_;
+        my $type = ref($obj);
+
+        if($type eq 'HASH'){
+            return $self->hash_to_json($obj);
+        }
+        elsif($type eq 'ARRAY'){
+            return $self->array_to_json($obj);
+        }
+        elsif ($type) { # blessed object?
+            if (blessed($obj)) {
+
+                return $self->value_to_json($obj) if ( $obj->isa('JSON::PP::Boolean') );
+
+                if ( $convert_blessed and $obj->can('TO_JSON') ) {
+                    my $result = $obj->TO_JSON();
+                    if ( defined $result and ref( $result ) ) {
+                        if ( refaddr( $obj ) eq refaddr( $result ) ) {
+                            encode_error( sprintf(
+                                "%s::TO_JSON method returned same object as was passed instead of a new one",
+                                ref $obj
+                            ) );
+                        }
+                    }
+
+                    return $self->object_to_json( $result );
+                }
+
+                return "$obj" if ( $bignum and _is_bignum($obj) );
+
+                if ($allow_blessed) {
+                    return $self->blessed_to_json($obj) if ($as_nonblessed); # will be removed.
+                    return 'null';
+                }
+                encode_error( sprintf("encountered object '%s', but neither allow_blessed "
+                    . "nor convert_blessed settings are enabled", $obj)
+                );
+            }
+            else {
+                return $self->value_to_json($obj);
+            }
+        }
+        else{
+            return $self->value_to_json($obj);
+        }
+    }
+
+
+    sub hash_to_json {
+        my ($self, $obj) = @_;
+        my @res;
+
+        encode_error("json text or perl structure exceeds maximum nesting level (max_depth set too low?)")
+                                         if (++$depth > $max_depth);
+
+        my ($pre, $post) = $indent ? $self->_up_indent() : ('', '');
+        my $del = ($space_before ? ' ' : '') . ':' . ($space_after ? ' ' : '');
+
+        for my $k ( _sort( $obj ) ) {
+            if ( OLD_PERL ) { utf8::decode($k) } # key for Perl 5.6 / be optimized
+            push @res, $self->string_to_json( $k )
+                          .  $del
+                          . ( ref $obj->{$k} ? $self->object_to_json( $obj->{$k} ) : $self->value_to_json( $obj->{$k} ) );
+        }
+
+        --$depth;
+        $self->_down_indent() if ($indent);
+
+        return '{}' unless @res;
+        return '{' . $pre . join( ",$pre", @res ) . $post . '}';
+    }
+
+
+    sub array_to_json {
+        my ($self, $obj) = @_;
+        my @res;
+
+        encode_error("json text or perl structure exceeds maximum nesting level (max_depth set too low?)")
+                                         if (++$depth > $max_depth);
+
+        my ($pre, $post) = $indent ? $self->_up_indent() : ('', '');
+
+        for my $v (@$obj){
+            push @res, ref($v) ? $self->object_to_json($v) : $self->value_to_json($v);
+        }
+
+        --$depth;
+        $self->_down_indent() if ($indent);
+
+        return '[]' unless @res;
+        return '[' . $pre . join( ",$pre", @res ) . $post . ']';
+    }
+
+    sub _looks_like_number {
+        my $value = shift;
+        if (USE_B) {
+            my $b_obj = B::svref_2object(\$value);
+            my $flags = $b_obj->FLAGS;
+            return 1 if $flags & ( B::SVp_IOK() | B::SVp_NOK() ) and !( $flags & B::SVp_POK() );
+            return;
+        } else {
+            no warnings 'numeric';
+            # detect numbers
+            # string & "" -> ""
+            # number & "" -> 0 (with warning)
+            # nan and inf can detect as numbers, so check with * 0
+            return unless length((my $dummy = "") & $value);
+            return unless 0 + $value eq $value;
+            return 1 if $value * 0 == 0;
+            return -1; # inf/nan
+        }
+    }
+
+    sub value_to_json {
+        my ($self, $value) = @_;
+
+        return 'null' if(!defined $value);
+
+        my $type = ref($value);
+
+        if (!$type) {
+            if (_looks_like_number($value)) {
+                return $value;
+            }
+            return $self->string_to_json($value);
+        }
+        elsif( blessed($value) and  $value->isa('JSON::PP::Boolean') ){
+            return $$value == 1 ? 'true' : 'false';
+        }
+        else {
+            if ((overload::StrVal($value) =~ /=(\w+)/)[0]) {
+                return $self->value_to_json("$value");
+            }
+
+            if ($type eq 'SCALAR' and defined $$value) {
+                return   $$value eq '1' ? 'true'
+                       : $$value eq '0' ? 'false'
+                       : $self->{PROPS}->[ P_ALLOW_UNKNOWN ] ? 'null'
+                       : encode_error("cannot encode reference to scalar");
+            }
+
+            if ( $self->{PROPS}->[ P_ALLOW_UNKNOWN ] ) {
+                return 'null';
+            }
+            else {
+                if ( $type eq 'SCALAR' or $type eq 'REF' ) {
+                    encode_error("cannot encode reference to scalar");
+                }
+                else {
+                    encode_error("encountered $value, but JSON can only represent references to arrays or hashes");
+                }
+            }
+
+        }
+    }
+
+
+    my %esc = (
+        "\n" => '\n',
+        "\r" => '\r',
+        "\t" => '\t',
+        "\f" => '\f',
+        "\b" => '\b',
+        "\"" => '\"',
+        "\\" => '\\\\',
+        "\'" => '\\\'',
+    );
+
+
+    sub string_to_json {
+        my ($self, $arg) = @_;
+
+        $arg =~ s/([\x22\x5c\n\r\t\f\b])/$esc{$1}/g;
+        $arg =~ s/\//\\\//g if ($escape_slash);
+        $arg =~ s/([\x00-\x08\x0b\x0e-\x1f])/'\\u00' . unpack('H2', $1)/eg;
+
+        if ($ascii) {
+            $arg = JSON_PP_encode_ascii($arg);
+        }
+
+        if ($latin1) {
+            $arg = JSON_PP_encode_latin1($arg);
+        }
+
+        if ($utf8) {
+            utf8::encode($arg);
+        }
+
+        return '"' . $arg . '"';
+    }
+
+
+    sub blessed_to_json {
+        my $reftype = reftype($_[1]) || '';
+        if ($reftype eq 'HASH') {
+            return $_[0]->hash_to_json($_[1]);
+        }
+        elsif ($reftype eq 'ARRAY') {
+            return $_[0]->array_to_json($_[1]);
+        }
+        else {
+            return 'null';
+        }
+    }
+
+
+    sub encode_error {
+        my $error  = shift;
+        Carp::croak "$error";
+    }
+
+
+    sub _sort {
+        defined $keysort ? (sort $keysort (keys %{$_[0]})) : keys %{$_[0]};
+    }
+
+
+    sub _up_indent {
+        my $self  = shift;
+        my $space = ' ' x $indent_length;
+
+        my ($pre,$post) = ('','');
+
+        $post = "\n" . $space x $indent_count;
+
+        $indent_count++;
+
+        $pre = "\n" . $space x $indent_count;
+
+        return ($pre,$post);
+    }
+
+
+    sub _down_indent { $indent_count--; }
+
+
+    sub PP_encode_box {
+        {
+            depth        => $depth,
+            indent_count => $indent_count,
+        };
+    }
+
+} # Convert
+
+
+sub _encode_ascii {
+    join('',
+        map {
+            $_ <= 127 ?
+                chr($_) :
+            $_ <= 65535 ?
+                sprintf('\u%04x', $_) : sprintf('\u%x\u%x', _encode_surrogates($_));
+        } unpack('U*', $_[0])
+    );
+}
+
+
+sub _encode_latin1 {
+    join('',
+        map {
+            $_ <= 255 ?
+                chr($_) :
+            $_ <= 65535 ?
+                sprintf('\u%04x', $_) : sprintf('\u%x\u%x', _encode_surrogates($_));
+        } unpack('U*', $_[0])
+    );
+}
+
+
+sub _encode_surrogates { # from perlunicode
+    my $uni = $_[0] - 0x10000;
+    return ($uni / 0x400 + 0xD800, $uni % 0x400 + 0xDC00);
+}
+
+
+sub _is_bignum {
+    $_[0]->isa('Math::BigInt') or $_[0]->isa('Math::BigFloat');
+}
+
+
+
+#
+# JSON => Perl
+#
+
+my $max_intsize;
+
+BEGIN {
+    my $checkint = 1111;
+    for my $d (5..64) {
+        $checkint .= 1;
+        my $int   = eval qq| $checkint |;
+        if ($int =~ /[eE]/) {
+            $max_intsize = $d - 1;
+            last;
+        }
+    }
+}
+
+{ # PARSE 
+
+    my %escapes = ( #  by Jeremy Muhlich <jmuhlich [at] bitflood.org>
+        b    => "\x8",
+        t    => "\x9",
+        n    => "\xA",
+        f    => "\xC",
+        r    => "\xD",
+        '\\' => '\\',
+        '"'  => '"',
+        '/'  => '/',
+    );
+
+    my $text; # json data
+    my $at;   # offset
+    my $ch;   # first character
+    my $len;  # text length (changed according to UTF8 or NON UTF8)
+    # INTERNAL
+    my $depth;          # nest counter
+    my $encoding;       # json text encoding
+    my $is_valid_utf8;  # temp variable
+    my $utf8_len;       # utf8 byte length
+    # FLAGS
+    my $utf8;           # must be utf8
+    my $max_depth;      # max nest number of objects and arrays
+    my $max_size;
+    my $relaxed;
+    my $cb_object;
+    my $cb_sk_object;
+
+    my $F_HOOK;
+
+    my $allow_bignum;   # using Math::BigInt/BigFloat
+    my $singlequote;    # loosely quoting
+    my $loose;          # 
+    my $allow_barekey;  # bareKey
+
+    sub _detect_utf_encoding {
+        my $text = shift;
+        my @octets = unpack('C4', $text);
+        return 'unknown' unless defined $octets[3];
+        return ( $octets[0] and  $octets[1]) ? 'UTF-8'
+             : (!$octets[0] and  $octets[1]) ? 'UTF-16BE'
+             : (!$octets[0] and !$octets[1]) ? 'UTF-32BE'
+             : ( $octets[2]                ) ? 'UTF-16LE'
+             : (!$octets[2]                ) ? 'UTF-32LE'
+             : 'unknown';
+    }
+
+    sub PP_decode_json {
+        my ($self, $want_offset);
+
+        ($self, $text, $want_offset) = @_;
+
+        ($at, $ch, $depth) = (0, '', 0);
+
+        if ( !defined $text or ref $text ) {
+            decode_error("malformed JSON string, neither array, object, number, string or atom");
+        }
+
+        my $props = $self->{PROPS};
+
+        ($utf8, $relaxed, $loose, $allow_bignum, $allow_barekey, $singlequote)
+            = @{$props}[P_UTF8, P_RELAXED, P_LOOSE .. P_ALLOW_SINGLEQUOTE];
+
+        if ( $utf8 ) {
+            $encoding = _detect_utf_encoding($text);
+            if ($encoding ne 'UTF-8' and $encoding ne 'unknown') {
+                require Encode;
+                Encode::from_to($text, $encoding, 'utf-8');
+            } else {
+                utf8::downgrade( $text, 1 ) or Carp::croak("Wide character in subroutine entry");
+            }
+        }
+        else {
+            utf8::upgrade( $text );
+            utf8::encode( $text );
+        }
+
+        $len = length $text;
+
+        ($max_depth, $max_size, $cb_object, $cb_sk_object, $F_HOOK)
+             = @{$self}{qw/max_depth  max_size cb_object cb_sk_object F_HOOK/};
+
+        if ($max_size > 1) {
+            use bytes;
+            my $bytes = length $text;
+            decode_error(
+                sprintf("attempted decode of JSON text of %s bytes size, but max_size is set to %s"
+                    , $bytes, $max_size), 1
+            ) if ($bytes > $max_size);
+        }
+
+        white(); # remove head white space
+
+        decode_error("malformed JSON string, neither array, object, number, string or atom") unless defined $ch; # Is there a first character for JSON structure?
+
+        my $result = value();
+
+        if ( !$props->[ P_ALLOW_NONREF ] and !ref $result ) {
+                decode_error(
+                'JSON text must be an object or array (but found number, string, true, false or null,'
+                       . ' use allow_nonref to allow this)', 1);
+        }
+
+        Carp::croak('something wrong.') if $len < $at; # we won't arrive here.
+
+        my $consumed = defined $ch ? $at - 1 : $at; # consumed JSON text length
+
+        white(); # remove tail white space
+
+        return ( $result, $consumed ) if $want_offset; # all right if decode_prefix
+
+        decode_error("garbage after JSON object") if defined $ch;
+
+        $result;
+    }
+
+
+    sub next_chr {
+        return $ch = undef if($at >= $len);
+        $ch = substr($text, $at++, 1);
+    }
+
+
+    sub value {
+        white();
+        return          if(!defined $ch);
+        return object() if($ch eq '{');
+        return array()  if($ch eq '[');
+        return string() if($ch eq '"' or ($singlequote and $ch eq "'"));
+        return number() if($ch =~ /[0-9]/ or $ch eq '-');
+        return word();
+    }
+
+    sub string {
+        my $utf16;
+        my $is_utf8;
+
+        ($is_valid_utf8, $utf8_len) = ('', 0);
+
+        my $s = ''; # basically UTF8 flag on
+
+        if($ch eq '"' or ($singlequote and $ch eq "'")){
+            my $boundChar = $ch;
+
+            OUTER: while( defined(next_chr()) ){
+
+                if($ch eq $boundChar){
+                    next_chr();
+
+                    if ($utf16) {
+                        decode_error("missing low surrogate character in surrogate pair");
+                    }
+
+                    utf8::decode($s) if($is_utf8);
+
+                    return $s;
+                }
+                elsif($ch eq '\\'){
+                    next_chr();
+                    if(exists $escapes{$ch}){
+                        $s .= $escapes{$ch};
+                    }
+                    elsif($ch eq 'u'){ # UNICODE handling
+                        my $u = '';
+
+                        for(1..4){
+                            $ch = next_chr();
+                            last OUTER if($ch !~ /[0-9a-fA-F]/);
+                            $u .= $ch;
+                        }
+
+                        # U+D800 - U+DBFF
+                        if ($u =~ /^[dD][89abAB][0-9a-fA-F]{2}/) { # UTF-16 high surrogate?
+                            $utf16 = $u;
+                        }
+                        # U+DC00 - U+DFFF
+                        elsif ($u =~ /^[dD][c-fC-F][0-9a-fA-F]{2}/) { # UTF-16 low surrogate?
+                            unless (defined $utf16) {
+                                decode_error("missing high surrogate character in surrogate pair");
+                            }
+                            $is_utf8 = 1;
+                            $s .= JSON_PP_decode_surrogates($utf16, $u) || next;
+                            $utf16 = undef;
+                        }
+                        else {
+                            if (defined $utf16) {
+                                decode_error("surrogate pair expected");
+                            }
+
+                            if ( ( my $hex = hex( $u ) ) > 127 ) {
+                                $is_utf8 = 1;
+                                $s .= JSON_PP_decode_unicode($u) || next;
+                            }
+                            else {
+                                $s .= chr $hex;
+                            }
+                        }
+
+                    }
+                    else{
+                        unless ($loose) {
+                            $at -= 2;
+                            decode_error('illegal backslash escape sequence in string');
+                        }
+                        $s .= $ch;
+                    }
+                }
+                else{
+
+                    if ( ord $ch  > 127 ) {
+                        unless( $ch = is_valid_utf8($ch) ) {
+                            $at -= 1;
+                            decode_error("malformed UTF-8 character in JSON string");
+                        }
+                        else {
+                            $at += $utf8_len - 1;
+                        }
+
+                        $is_utf8 = 1;
+                    }
+
+                    if (!$loose) {
+                        if ($ch =~ /[\x00-\x1f\x22\x5c]/)  { # '/' ok
+                            $at--;
+                            decode_error('invalid character encountered while parsing JSON string');
+                        }
+                    }
+
+                    $s .= $ch;
+                }
+            }
+        }
+
+        decode_error("unexpected end of string while parsing JSON string");
+    }
+
+
+    sub white {
+        while( defined $ch  ){
+            if($ch eq '' or $ch =~ /\A[ \t\r\n]\z/){
+                next_chr();
+            }
+            elsif($relaxed and $ch eq '/'){
+                next_chr();
+                if(defined $ch and $ch eq '/'){
+                    1 while(defined(next_chr()) and $ch ne "\n" and $ch ne "\r");
+                }
+                elsif(defined $ch and $ch eq '*'){
+                    next_chr();
+                    while(1){
+                        if(defined $ch){
+                            if($ch eq '*'){
+                                if(defined(next_chr()) and $ch eq '/'){
+                                    next_chr();
+                                    last;
+                                }
+                            }
+                            else{
+                                next_chr();
+                            }
+                        }
+                        else{
+                            decode_error("Unterminated comment");
+                        }
+                    }
+                    next;
+                }
+                else{
+                    $at--;
+                    decode_error("malformed JSON string, neither array, object, number, string or atom");
+                }
+            }
+            else{
+                if ($relaxed and $ch eq '#') { # correctly?
+                    pos($text) = $at;
+                    $text =~ /\G([^\n]*(?:\r\n|\r|\n|$))/g;
+                    $at = pos($text);
+                    next_chr;
+                    next;
+                }
+
+                last;
+            }
+        }
+    }
+
+
+    sub array {
+        my $a  = $_[0] || []; # you can use this code to use another array ref object.
+
+        decode_error('json text or perl structure exceeds maximum nesting level (max_depth set too low?)')
+                                                    if (++$depth > $max_depth);
+
+        next_chr();
+        white();
+
+        if(defined $ch and $ch eq ']'){
+            --$depth;
+            next_chr();
+            return $a;
+        }
+        else {
+            while(defined($ch)){
+                push @$a, value();
+
+                white();
+
+                if (!defined $ch) {
+                    last;
+                }
+
+                if($ch eq ']'){
+                    --$depth;
+                    next_chr();
+                    return $a;
+                }
+
+                if($ch ne ','){
+                    last;
+                }
+
+                next_chr();
+                white();
+
+                if ($relaxed and $ch eq ']') {
+                    --$depth;
+                    next_chr();
+                    return $a;
+                }
+
+            }
+        }
+
+        $at-- if defined $ch and $ch ne '';
+        decode_error(", or ] expected while parsing array");
+    }
+
+
+    sub object {
+        my $o = $_[0] || {}; # you can use this code to use another hash ref object.
+        my $k;
+
+        decode_error('json text or perl structure exceeds maximum nesting level (max_depth set too low?)')
+                                                if (++$depth > $max_depth);
+        next_chr();
+        white();
+
+        if(defined $ch and $ch eq '}'){
+            --$depth;
+            next_chr();
+            if ($F_HOOK) {
+                return _json_object_hook($o);
+            }
+            return $o;
+        }
+        else {
+            while (defined $ch) {
+                $k = ($allow_barekey and $ch ne '"' and $ch ne "'") ? bareKey() : string();
+                white();
+
+                if(!defined $ch or $ch ne ':'){
+                    $at--;
+                    decode_error("':' expected");
+                }
+
+                next_chr();
+                $o->{$k} = value();
+                white();
+
+                last if (!defined $ch);
+
+                if($ch eq '}'){
+                    --$depth;
+                    next_chr();
+                    if ($F_HOOK) {
+                        return _json_object_hook($o);
+                    }
+                    return $o;
+                }
+
+                if($ch ne ','){
+                    last;
+                }
+
+                next_chr();
+                white();
+
+                if ($relaxed and $ch eq '}') {
+                    --$depth;
+                    next_chr();
+                    if ($F_HOOK) {
+                        return _json_object_hook($o);
+                    }
+                    return $o;
+                }
+
+            }
+
+        }
+
+        $at-- if defined $ch and $ch ne '';
+        decode_error(", or } expected while parsing object/hash");
+    }
+
+
+    sub bareKey { # doesn't strictly follow Standard ECMA-262 3rd Edition
+        my $key;
+        while($ch =~ /[^\x00-\x23\x25-\x2F\x3A-\x40\x5B-\x5E\x60\x7B-\x7F]/){
+            $key .= $ch;
+            next_chr();
+        }
+        return $key;
+    }
+
+
+    sub word {
+        my $word =  substr($text,$at-1,4);
+
+        if($word eq 'true'){
+            $at += 3;
+            next_chr;
+            return $JSON::PP::true;
+        }
+        elsif($word eq 'null'){
+            $at += 3;
+            next_chr;
+            return undef;
+        }
+        elsif($word eq 'fals'){
+            $at += 3;
+            if(substr($text,$at,1) eq 'e'){
+                $at++;
+                next_chr;
+                return $JSON::PP::false;
+            }
+        }
+
+        $at--; # for decode_error report
+
+        decode_error("'null' expected")  if ($word =~ /^n/);
+        decode_error("'true' expected")  if ($word =~ /^t/);
+        decode_error("'false' expected") if ($word =~ /^f/);
+        decode_error("malformed JSON string, neither array, object, number, string or atom");
+    }
+
+
+    sub number {
+        my $n    = '';
+        my $v;
+        my $is_dec;
+        my $is_exp;
+
+        if($ch eq '-'){
+            $n = '-';
+            next_chr;
+            if (!defined $ch or $ch !~ /\d/) {
+                decode_error("malformed number (no digits after initial minus)");
+            }
+        }
+
+        # According to RFC4627, hex or oct digits are invalid.
+        if($ch eq '0'){
+            my $peek = substr($text,$at,1);
+            if($peek =~ /^[0-9a-dfA-DF]/){ # e may be valid (exponential)
+                decode_error("malformed number (leading zero must not be followed by another digit)");
+            }
+            $n .= $ch;
+            next_chr;
+        }
+
+        while(defined $ch and $ch =~ /\d/){
+            $n .= $ch;
+            next_chr;
+        }
+
+        if(defined $ch and $ch eq '.'){
+            $n .= '.';
+            $is_dec = 1;
+
+            next_chr;
+            if (!defined $ch or $ch !~ /\d/) {
+                decode_error("malformed number (no digits after decimal point)");
+            }
+            else {
+                $n .= $ch;
+            }
+
+            while(defined(next_chr) and $ch =~ /\d/){
+                $n .= $ch;
+            }
+        }
+
+        if(defined $ch and ($ch eq 'e' or $ch eq 'E')){
+            $n .= $ch;
+            $is_exp = 1;
+            next_chr;
+
+            if(defined($ch) and ($ch eq '+' or $ch eq '-')){
+                $n .= $ch;
+                next_chr;
+                if (!defined $ch or $ch =~ /\D/) {
+                    decode_error("malformed number (no digits after exp sign)");
+                }
+                $n .= $ch;
+            }
+            elsif(defined($ch) and $ch =~ /\d/){
+                $n .= $ch;
+            }
+            else {
+                decode_error("malformed number (no digits after exp sign)");
+            }
+
+            while(defined(next_chr) and $ch =~ /\d/){
+                $n .= $ch;
+            }
+
+        }
+
+        $v .= $n;
+
+        if ($is_dec or $is_exp) {
+            if ($allow_bignum) {
+                require Math::BigFloat;
+                return Math::BigFloat->new($v);
+            }
+        } else {
+            if (length $v > $max_intsize) {
+                if ($allow_bignum) { # from Adam Sussman
+                    require Math::BigInt;
+                    return Math::BigInt->new($v);
+                }
+                else {
+                    return "$v";
+                }
+            }
+        }
+
+        return $is_dec ? $v/1.0 : 0+$v;
+    }
+
+
+    sub is_valid_utf8 {
+
+        $utf8_len = $_[0] =~ /[\x00-\x7F]/  ? 1
+                  : $_[0] =~ /[\xC2-\xDF]/  ? 2
+                  : $_[0] =~ /[\xE0-\xEF]/  ? 3
+                  : $_[0] =~ /[\xF0-\xF4]/  ? 4
+                  : 0
+                  ;
+
+        return unless $utf8_len;
+
+        my $is_valid_utf8 = substr($text, $at - 1, $utf8_len);
+
+        return ( $is_valid_utf8 =~ /^(?:
+             [\x00-\x7F]
+            |[\xC2-\xDF][\x80-\xBF]
+            |[\xE0][\xA0-\xBF][\x80-\xBF]
+            |[\xE1-\xEC][\x80-\xBF][\x80-\xBF]
+            |[\xED][\x80-\x9F][\x80-\xBF]
+            |[\xEE-\xEF][\x80-\xBF][\x80-\xBF]
+            |[\xF0][\x90-\xBF][\x80-\xBF][\x80-\xBF]
+            |[\xF1-\xF3][\x80-\xBF][\x80-\xBF][\x80-\xBF]
+            |[\xF4][\x80-\x8F][\x80-\xBF][\x80-\xBF]
+        )$/x )  ? $is_valid_utf8 : '';
+    }
+
+
+    sub decode_error {
+        my $error  = shift;
+        my $no_rep = shift;
+        my $str    = defined $text ? substr($text, $at) : '';
+        my $mess   = '';
+        my $type   = 'U*';
+
+        if ( OLD_PERL ) {
+            my $type   =  $] <  5.006           ? 'C*'
+                        : utf8::is_utf8( $str ) ? 'U*' # 5.6
+                        : 'C*'
+                        ;
+        }
+
+        for my $c ( unpack( $type, $str ) ) { # emulate pv_uni_display() ?
+            $mess .=  $c == 0x07 ? '\a'
+                    : $c == 0x09 ? '\t'
+                    : $c == 0x0a ? '\n'
+                    : $c == 0x0d ? '\r'
+                    : $c == 0x0c ? '\f'
+                    : $c <  0x20 ? sprintf('\x{%x}', $c)
+                    : $c == 0x5c ? '\\\\'
+                    : $c <  0x80 ? chr($c)
+                    : sprintf('\x{%x}', $c)
+                    ;
+            if ( length $mess >= 20 ) {
+                $mess .= '...';
+                last;
+            }
+        }
+
+        unless ( length $mess ) {
+            $mess = '(end of string)';
+        }
+
+        Carp::croak (
+            $no_rep ? "$error" : "$error, at character offset $at (before \"$mess\")"
+        );
+
+    }
+
+
+    sub _json_object_hook {
+        my $o    = $_[0];
+        my @ks = keys %{$o};
+
+        if ( $cb_sk_object and @ks == 1 and exists $cb_sk_object->{ $ks[0] } and ref $cb_sk_object->{ $ks[0] } ) {
+            my @val = $cb_sk_object->{ $ks[0] }->( $o->{$ks[0]} );
+            if (@val == 1) {
+                return $val[0];
+            }
+        }
+
+        my @val = $cb_object->($o) if ($cb_object);
+        if (@val == 0 or @val > 1) {
+            return $o;
+        }
+        else {
+            return $val[0];
+        }
+    }
+
+
+    sub PP_decode_box {
+        {
+            text    => $text,
+            at      => $at,
+            ch      => $ch,
+            len     => $len,
+            depth   => $depth,
+            encoding      => $encoding,
+            is_valid_utf8 => $is_valid_utf8,
+        };
+    }
+
+} # PARSE
+
+
+sub _decode_surrogates { # from perlunicode
+    my $uni = 0x10000 + (hex($_[0]) - 0xD800) * 0x400 + (hex($_[1]) - 0xDC00);
+    my $un  = pack('U*', $uni);
+    utf8::encode( $un );
+    return $un;
+}
+
+
+sub _decode_unicode {
+    my $un = pack('U', hex shift);
+    utf8::encode( $un );
+    return $un;
+}
+
+#
+# Setup for various Perl versions (the code from JSON::PP58)
+#
+
+BEGIN {
+
+    unless ( defined &utf8::is_utf8 ) {
+       require Encode;
+       *utf8::is_utf8 = *Encode::is_utf8;
+    }
+
+    if ( !OLD_PERL ) {
+        *JSON::PP::JSON_PP_encode_ascii      = \&_encode_ascii;
+        *JSON::PP::JSON_PP_encode_latin1     = \&_encode_latin1;
+        *JSON::PP::JSON_PP_decode_surrogates = \&_decode_surrogates;
+        *JSON::PP::JSON_PP_decode_unicode    = \&_decode_unicode;
+
+        if ($] < 5.008003) { # join() in 5.8.0 - 5.8.2 is broken.
+            package # hide from PAUSE
+              JSON::PP;
+            require subs;
+            subs->import('join');
+            eval q|
+                sub join {
+                    return '' if (@_ < 2);
+                    my $j   = shift;
+                    my $str = shift;
+                    for (@_) { $str .= $j . $_; }
+                    return $str;
+                }
+            |;
+        }
+    }
+
+
+    sub JSON::PP::incr_parse {
+        local $Carp::CarpLevel = 1;
+        ( $_[0]->{_incr_parser} ||= JSON::PP::IncrParser->new )->incr_parse( @_ );
+    }
+
+
+    sub JSON::PP::incr_skip {
+        ( $_[0]->{_incr_parser} ||= JSON::PP::IncrParser->new )->incr_skip;
+    }
+
+
+    sub JSON::PP::incr_reset {
+        ( $_[0]->{_incr_parser} ||= JSON::PP::IncrParser->new )->incr_reset;
+    }
+
+    eval q{
+        sub JSON::PP::incr_text : lvalue {
+            $_[0]->{_incr_parser} ||= JSON::PP::IncrParser->new;
+
+            if ( $_[0]->{_incr_parser}->{incr_pos} ) {
+                Carp::croak("incr_text cannot be called when the incremental parser already started parsing");
+            }
+            $_[0]->{_incr_parser}->{incr_text};
+        }
+    } if ( $] >= 5.006 );
+
+} # Setup for various Perl versions (the code from JSON::PP58)
+
+
+###############################
+# Utilities
+#
+
+BEGIN {
+    eval 'require Scalar::Util';
+    unless($@){
+        *JSON::PP::blessed = \&Scalar::Util::blessed;
+        *JSON::PP::reftype = \&Scalar::Util::reftype;
+        *JSON::PP::refaddr = \&Scalar::Util::refaddr;
+    }
+    else{ # This code is from Scalar::Util.
+        # warn $@;
+        eval 'sub UNIVERSAL::a_sub_not_likely_to_be_here { ref($_[0]) }';
+        *JSON::PP::blessed = sub {
+            local($@, $SIG{__DIE__}, $SIG{__WARN__});
+            ref($_[0]) ? eval { $_[0]->a_sub_not_likely_to_be_here } : undef;
+        };
+        require B;
+        my %tmap = qw(
+            B::NULL   SCALAR
+            B::HV     HASH
+            B::AV     ARRAY
+            B::CV     CODE
+            B::IO     IO
+            B::GV     GLOB
+            B::REGEXP REGEXP
+        );
+        *JSON::PP::reftype = sub {
+            my $r = shift;
+
+            return undef unless length(ref($r));
+
+            my $t = ref(B::svref_2object($r));
+
+            return
+                exists $tmap{$t} ? $tmap{$t}
+              : length(ref($$r)) ? 'REF'
+              :                    'SCALAR';
+        };
+        *JSON::PP::refaddr = sub {
+          return undef unless length(ref($_[0]));
+
+          my $addr;
+          if(defined(my $pkg = blessed($_[0]))) {
+            $addr .= bless $_[0], 'Scalar::Util::Fake';
+            bless $_[0], $pkg;
+          }
+          else {
+            $addr .= $_[0]
+          }
+
+          $addr =~ /0x(\w+)/;
+          local $^W;
+          #no warnings 'portable';
+          hex($1);
+        }
+    }
+}
+
+
+# shamelessly copied and modified from JSON::XS code.
+
+$JSON::PP::true  = do { bless \(my $dummy = 1), "JSON::PP::Boolean" };
+$JSON::PP::false = do { bless \(my $dummy = 0), "JSON::PP::Boolean" };
+
+sub is_bool { defined $_[0] and UNIVERSAL::isa($_[0], "JSON::PP::Boolean"); }
+
+sub true  { $JSON::PP::true  }
+sub false { $JSON::PP::false }
+sub null  { undef; }
+
+###############################
+
+package # hide from PAUSE
+  JSON::PP::IncrParser;
+
+use strict;
+
+use constant INCR_M_WS   => 0; # initial whitespace skipping
+use constant INCR_M_STR  => 1; # inside string
+use constant INCR_M_BS   => 2; # inside backslash
+use constant INCR_M_JSON => 3; # outside anything, count nesting
+use constant INCR_M_C0   => 4;
+use constant INCR_M_C1   => 5;
+
+$JSON::backportPP::IncrParser::VERSION = '1.01';
+
+sub new {
+    my ( $class ) = @_;
+
+    bless {
+        incr_nest    => 0,
+        incr_text    => undef,
+        incr_pos     => 0,
+        incr_mode    => 0,
+    }, $class;
+}
+
+
+sub incr_parse {
+    my ( $self, $coder, $text ) = @_;
+
+    $self->{incr_text} = '' unless ( defined $self->{incr_text} );
+
+    if ( defined $text ) {
+        if ( utf8::is_utf8( $text ) and !utf8::is_utf8( $self->{incr_text} ) ) {
+            utf8::upgrade( $self->{incr_text} ) ;
+            utf8::decode( $self->{incr_text} ) ;
+        }
+        $self->{incr_text} .= $text;
+    }
+
+    if ( defined wantarray ) {
+        my $max_size = $coder->get_max_size;
+        my $p = $self->{incr_pos};
+        my @ret;
+        {
+            do {
+                unless ( $self->{incr_nest} <= 0 and $self->{incr_mode} == INCR_M_JSON ) {
+                    $self->_incr_parse( $coder );
+
+                    if ( $max_size and $self->{incr_pos} > $max_size ) {
+                        Carp::croak("attempted decode of JSON text of $self->{incr_pos} bytes size, but max_size is set to $max_size");
+                    }
+                    unless ( $self->{incr_nest} <= 0 and $self->{incr_mode} == INCR_M_JSON ) {
+                        # as an optimisation, do not accumulate white space in the incr buffer
+                        if ( $self->{incr_mode} == INCR_M_WS and $self->{incr_pos} ) {
+                            $self->{incr_pos} = 0;
+                            $self->{incr_text} = '';
+                        }
+                        last;
+                    }
+                }
+
+                my ($obj, $offset) = $coder->PP_decode_json( $self->{incr_text}, 0x00000001 );
+                push @ret, $obj;
+                use bytes;
+                $self->{incr_text} = substr( $self->{incr_text}, $offset || 0 );
+                $self->{incr_pos} = 0;
+                $self->{incr_nest} = 0;
+                $self->{incr_mode} = 0;
+                last unless wantarray;
+            } while ( wantarray );
+        }
+
+        if ( wantarray ) {
+            return @ret;
+        }
+        else { # in scalar context
+            return $ret[0] ? $ret[0] : undef;
+        }
+    }
+}
+
+
+sub _incr_parse {
+    my ($self, $coder) = @_;
+    my $text = $self->{incr_text};
+    my $len = length $text;
+    my $p = $self->{incr_pos};
+
+INCR_PARSE:
+    while ( $len > $p ) {
+        my $s = substr( $text, $p, 1 );
+        last INCR_PARSE unless defined $s;
+        my $mode = $self->{incr_mode};
+
+        if ( $mode == INCR_M_WS ) {
+            while ( $len > $p ) {
+                $s = substr( $text, $p, 1 );
+                last INCR_PARSE unless defined $s;
+                if ( ord($s) > 0x20 ) {
+                    if ( $s eq '#' ) {
+                        $self->{incr_mode} = INCR_M_C0;
+                        redo INCR_PARSE;
+                    } else {
+                        $self->{incr_mode} = INCR_M_JSON;
+                        redo INCR_PARSE;
+                    }
+                }
+                $p++;
+            }
+        } elsif ( $mode == INCR_M_BS ) {
+            $p++;
+            $self->{incr_mode} = INCR_M_STR;
+            redo INCR_PARSE;
+        } elsif ( $mode == INCR_M_C0 or $mode == INCR_M_C1 ) {
+            while ( $len > $p ) {
+                $s = substr( $text, $p, 1 );
+                last INCR_PARSE unless defined $s;
+                if ( $s eq "\n" ) {
+                    $self->{incr_mode} = $self->{incr_mode} == INCR_M_C0 ? INCR_M_WS : INCR_M_JSON;
+                    last;
+                }
+                $p++;
+            }
+            next;
+        } elsif ( $mode == INCR_M_STR ) {
+            while ( $len > $p ) {
+                $s = substr( $text, $p, 1 );
+                last INCR_PARSE unless defined $s;
+                if ( $s eq '"' ) {
+                    $p++;
+                    $self->{incr_mode} = INCR_M_JSON;
+
+                    last INCR_PARSE unless $self->{incr_nest};
+                    redo INCR_PARSE;
+                }
+                elsif ( $s eq '\\' ) {
+                    $p++;
+                    if ( !defined substr($text, $p, 1) ) {
+                        $self->{incr_mode} = INCR_M_BS;
+                        last INCR_PARSE;
+                    }
+                }
+                $p++;
+            }
+        } elsif ( $mode == INCR_M_JSON ) {
+            while ( $len > $p ) {
+                $s = substr( $text, $p++, 1 );
+                if ( $s eq "\x00" ) {
+                    $p--;
+                    last INCR_PARSE;
+                } elsif ( $s eq "\x09" or $s eq "\x0a" or $s eq "\x0d" or $s eq "\x20" ) {
+                    if ( !$self->{incr_nest} ) {
+                        $p--; # do not eat the whitespace, let the next round do it
+                        last INCR_PARSE;
+                    }
+                    next;
+                } elsif ( $s eq '"' ) {
+                    $self->{incr_mode} = INCR_M_STR;
+                    redo INCR_PARSE;
+                } elsif ( $s eq '[' or $s eq '{' ) {
+                    if ( ++$self->{incr_nest} > $coder->get_max_depth ) {
+                        Carp::croak('json text or perl structure exceeds maximum nesting level (max_depth set too low?)');
+                    }
+                    next;
+                } elsif ( $s eq ']' or $s eq '}' ) {
+                    if ( --$self->{incr_nest} <= 0 ) {
+                        last INCR_PARSE;
+                    }
+                } elsif ( $s eq '#' ) {
+                    $self->{incr_mode} = INCR_M_C1;
+                    redo INCR_PARSE;
+                }
+            }
+        }
+    }
+
+    $self->{incr_pos} = $p;
+    $self->{incr_parsing} = $p ? 1 : 0; # for backward compatibility
+}
+
+
+sub incr_text {
+    if ( $_[0]->{incr_pos} ) {
+        Carp::croak("incr_text cannot be called when the incremental parser already started parsing");
+    }
+    $_[0]->{incr_text};
+}
+
+
+sub incr_skip {
+    my $self  = shift;
+    $self->{incr_text} = substr( $self->{incr_text}, $self->{incr_pos} );
+    $self->{incr_pos}     = 0;
+    $self->{incr_mode}    = 0;
+    $self->{incr_nest}    = 0;
+}
+
+
+sub incr_reset {
+    my $self = shift;
+    $self->{incr_text}    = undef;
+    $self->{incr_pos}     = 0;
+    $self->{incr_mode}    = 0;
+    $self->{incr_nest}    = 0;
+}
+
+###############################
+
+
+1;
+__END__
+=pod
+
+=head1 NAME
+
+JSON::PP - JSON::XS compatible pure-Perl module.
+
+=head1 SYNOPSIS
+
+ use JSON::PP;
+
+ # exported functions, they croak on error
+ # and expect/generate UTF-8
+
+ $utf8_encoded_json_text = encode_json $perl_hash_or_arrayref;
+ $perl_hash_or_arrayref  = decode_json $utf8_encoded_json_text;
+
+ # OO-interface
+
+ $json = JSON::PP->new->ascii->pretty->allow_nonref;
+ 
+ $pretty_printed_json_text = $json->encode( $perl_scalar );
+ $perl_scalar = $json->decode( $json_text );
+ 
+ # Note that JSON version 2.0 and above will automatically use
+ # JSON::XS or JSON::PP, so you should be able to just:
+ 
+ use JSON;
+
+
+=head1 VERSION
+
+    2.91_04
+
+=head1 DESCRIPTION
+
+JSON::PP is a pure perl JSON decoder/encoder (as of RFC4627, which
+we know is obsolete but we still stick to; see below for an option
+to support part of RFC7159), and (almost) compatible to much
+faster L<JSON::XS> written by Marc Lehmann in C. JSON::PP works as
+a fallback module when you use L<JSON> module without having
+installed JSON::XS.
+
+Because of this fallback feature of JSON.pm, JSON::PP tries not to
+be more JavaScript-friendly than JSON::XS (i.e. not to escape extra
+characters such as U+2028 and U+2029 nor support RFC7159/ECMA-404),
+in order for you not to lose such JavaScript-friendliness silently
+when you use JSON.pm and install JSON::XS for speed or by accident.
+If you need JavaScript-friendly RFC7159-compliant pure perl module,
+try L<JSON::Tiny>, which is derived from L<Mojolicious> web
+framework and is also smaller and faster than JSON::PP.
+
+JSON::PP has been in the Perl core since Perl 5.14, mainly for
+CPAN toolchain modules to parse META.json.
+
+=head1 FUNCTIONAL INTERFACE
+
+This section is taken from JSON::XS almost verbatim. C<encode_json>
+and C<decode_json> are exported by default.
+
+=head2 encode_json
+
+    $json_text = encode_json $perl_scalar
+
+Converts the given Perl data structure to a UTF-8 encoded, binary string
+(that is, the string contains octets only). Croaks on error.
+
+This function call is functionally identical to:
+
+    $json_text = JSON::PP->new->utf8->encode($perl_scalar)
+
+Except being faster.
+
+=head2 decode_json
+
+    $perl_scalar = decode_json $json_text
+
+The opposite of C<encode_json>: expects an UTF-8 (binary) string and tries
+to parse that as an UTF-8 encoded JSON text, returning the resulting
+reference. Croaks on error.
+
+This function call is functionally identical to:
+
+    $perl_scalar = JSON::PP->new->utf8->decode($json_text)
+
+Except being faster.
+
+=head2 JSON::PP::is_bool
+
+    $is_boolean = JSON::PP::is_bool($scalar)
+
+Returns true if the passed scalar represents either JSON::PP::true or
+JSON::PP::false, two constants that act like C<1> and C<0> respectively
+and are also used to represent JSON C<true> and C<false> in Perl strings.
+
+See L<MAPPING>, below, for more information on how JSON values are mapped to
+Perl.
+
+=head1 OBJECT-ORIENTED INTERFACE
+
+This section is also taken from JSON::XS.
+
+The object oriented interface lets you configure your own encoding or
+decoding style, within the limits of supported formats.
+
+=head2 new
+
+    $json = JSON::PP->new
+
+Creates a new JSON::PP object that can be used to de/encode JSON
+strings. All boolean flags described below are by default I<disabled>.
+
+The mutators for flags all return the JSON::PP object again and thus calls can
+be chained:
+
+   my $json = JSON::PP->new->utf8->space_after->encode({a => [1,2]})
+   => {"a": [1, 2]}
+
+=head2 ascii
+
+    $json = $json->ascii([$enable])
+    
+    $enabled = $json->get_ascii
+
+If C<$enable> is true (or missing), then the C<encode> method will not
+generate characters outside the code range C<0..127> (which is ASCII). Any
+Unicode characters outside that range will be escaped using either a
+single \uXXXX (BMP characters) or a double \uHHHH\uLLLLL escape sequence,
+as per RFC4627. The resulting encoded JSON text can be treated as a native
+Unicode string, an ascii-encoded, latin1-encoded or UTF-8 encoded string,
+or any other superset of ASCII.
+
+If C<$enable> is false, then the C<encode> method will not escape Unicode
+characters unless required by the JSON syntax or other flags. This results
+in a faster and more compact format.
+
+See also the section I<ENCODING/CODESET FLAG NOTES> later in this document.
+
+The main use for this flag is to produce JSON texts that can be
+transmitted over a 7-bit channel, as the encoded JSON texts will not
+contain any 8 bit characters.
+
+  JSON::PP->new->ascii(1)->encode([chr 0x10401])
+  => ["\ud801\udc01"]
+
+=head2 latin1
+
+    $json = $json->latin1([$enable])
+    
+    $enabled = $json->get_latin1
+
+If C<$enable> is true (or missing), then the C<encode> method will encode
+the resulting JSON text as latin1 (or iso-8859-1), escaping any characters
+outside the code range C<0..255>. The resulting string can be treated as a
+latin1-encoded JSON text or a native Unicode string. The C<decode> method
+will not be affected in any way by this flag, as C<decode> by default
+expects Unicode, which is a strict superset of latin1.
+
+If C<$enable> is false, then the C<encode> method will not escape Unicode
+characters unless required by the JSON syntax or other flags.
+
+See also the section I<ENCODING/CODESET FLAG NOTES> later in this document.
+
+The main use for this flag is efficiently encoding binary data as JSON
+text, as most octets will not be escaped, resulting in a smaller encoded
+size. The disadvantage is that the resulting JSON text is encoded
+in latin1 (and must correctly be treated as such when storing and
+transferring), a rare encoding for JSON. It is therefore most useful when
+you want to store data structures known to contain binary data efficiently
+in files or databases, not when talking to other JSON encoders/decoders.
+
+  JSON::PP->new->latin1->encode (["\x{89}\x{abc}"]
+  => ["\x{89}\\u0abc"]    # (perl syntax, U+abc escaped, U+89 not)
+
+=head2 utf8
+
+    $json = $json->utf8([$enable])
+    
+    $enabled = $json->get_utf8
+
+If C<$enable> is true (or missing), then the C<encode> method will encode
+the JSON result into UTF-8, as required by many protocols, while the
+C<decode> method expects to be handled an UTF-8-encoded string.  Please
+note that UTF-8-encoded strings do not contain any characters outside the
+range C<0..255>, they are thus useful for bytewise/binary I/O. In future
+versions, enabling this option might enable autodetection of the UTF-16
+and UTF-32 encoding families, as described in RFC4627.
+
+If C<$enable> is false, then the C<encode> method will return the JSON
+string as a (non-encoded) Unicode string, while C<decode> expects thus a
+Unicode string.  Any decoding or encoding (e.g. to UTF-8 or UTF-16) needs
+to be done yourself, e.g. using the Encode module.
+
+See also the section I<ENCODING/CODESET FLAG NOTES> later in this document.
+
+Example, output UTF-16BE-encoded JSON:
+
+  use Encode;
+  $jsontext = encode "UTF-16BE", JSON::PP->new->encode ($object);
+
+Example, decode UTF-32LE-encoded JSON:
+
+  use Encode;
+  $object = JSON::PP->new->decode (decode "UTF-32LE", $jsontext);
+
+=head2 pretty
+
+    $json = $json->pretty([$enable])
+
+This enables (or disables) all of the C<indent>, C<space_before> and
+C<space_after> (and in the future possibly more) flags in one call to
+generate the most readable (or most compact) form possible.
+
+=head2 indent
+
+    $json = $json->indent([$enable])
+    
+    $enabled = $json->get_indent
+
+If C<$enable> is true (or missing), then the C<encode> method will use a multiline
+format as output, putting every array member or object/hash key-value pair
+into its own line, indenting them properly.
+
+If C<$enable> is false, no newlines or indenting will be produced, and the
+resulting JSON text is guaranteed not to contain any C<newlines>.
+
+This setting has no effect when decoding JSON texts.
+
+The default indent space length is three.
+You can use C<indent_length> to change the length.
+
+=head2 space_before
+
+    $json = $json->space_before([$enable])
+    
+    $enabled = $json->get_space_before
+
+If C<$enable> is true (or missing), then the C<encode> method will add an extra
+optional space before the C<:> separating keys from values in JSON objects.
+
+If C<$enable> is false, then the C<encode> method will not add any extra
+space at those places.
+
+This setting has no effect when decoding JSON texts. You will also
+most likely combine this setting with C<space_after>.
+
+Example, space_before enabled, space_after and indent disabled:
+
+   {"key" :"value"}
+
+=head2 space_after
+
+    $json = $json->space_after([$enable])
+    
+    $enabled = $json->get_space_after
+
+If C<$enable> is true (or missing), then the C<encode> method will add an extra
+optional space after the C<:> separating keys from values in JSON objects
+and extra whitespace after the C<,> separating key-value pairs and array
+members.
+
+If C<$enable> is false, then the C<encode> method will not add any extra
+space at those places.
+
+This setting has no effect when decoding JSON texts.
+
+Example, space_before and indent disabled, space_after enabled:
+
+   {"key": "value"}
+
+=head2 relaxed
+
+    $json = $json->relaxed([$enable])
+    
+    $enabled = $json->get_relaxed
+
+If C<$enable> is true (or missing), then C<decode> will accept some
+extensions to normal JSON syntax (see below). C<encode> will not be
+affected in anyway. I<Be aware that this option makes you accept invalid
+JSON texts as if they were valid!>. I suggest only to use this option to
+parse application-specific files written by humans (configuration files,
+resource files etc.)
+
+If C<$enable> is false (the default), then C<decode> will only accept
+valid JSON texts.
+
+Currently accepted extensions are:
+
+=over 4
+
+=item * list items can have an end-comma
+
+JSON I<separates> array elements and key-value pairs with commas. This
+can be annoying if you write JSON texts manually and want to be able to
+quickly append elements, so this extension accepts comma at the end of
+such items not just between them:
+
+   [
+      1,
+      2, <- this comma not normally allowed
+   ]
+   {
+      "k1": "v1",
+      "k2": "v2", <- this comma not normally allowed
+   }
+
+=item * shell-style '#'-comments
+
+Whenever JSON allows whitespace, shell-style comments are additionally
+allowed. They are terminated by the first carriage-return or line-feed
+character, after which more white-space and comments are allowed.
+
+  [
+     1, # this comment not allowed in JSON
+        # neither this one...
+  ]
+
+=item * C-style multiple-line '/* */'-comments (JSON::PP only)
+
+Whenever JSON allows whitespace, C-style multiple-line comments are additionally
+allowed. Everything between C</*> and C<*/> is a comment, after which
+more white-space and comments are allowed.
+
+  [
+     1, /* this comment not allowed in JSON */
+        /* neither this one... */
+  ]
+
+=item * C++-style one-line '//'-comments (JSON::PP only)
+
+Whenever JSON allows whitespace, C++-style one-line comments are additionally
+allowed. They are terminated by the first carriage-return or line-feed
+character, after which more white-space and comments are allowed.
+
+  [
+     1, // this comment not allowed in JSON
+        // neither this one...
+  ]
+
+=back
+
+=head2 canonical
+
+    $json = $json->canonical([$enable])
+    
+    $enabled = $json->get_canonical
+
+If C<$enable> is true (or missing), then the C<encode> method will output JSON objects
+by sorting their keys. This is adding a comparatively high overhead.
+
+If C<$enable> is false, then the C<encode> method will output key-value
+pairs in the order Perl stores them (which will likely change between runs
+of the same script, and can change even within the same run from 5.18
+onwards).
+
+This option is useful if you want the same data structure to be encoded as
+the same JSON text (given the same overall settings). If it is disabled,
+the same hash might be encoded differently even if contains the same data,
+as key-value pairs have no inherent ordering in Perl.
+
+This setting has no effect when decoding JSON texts.
+
+This setting has currently no effect on tied hashes.
+
+=head2 allow_nonref
+
+    $json = $json->allow_nonref([$enable])
+    
+    $enabled = $json->get_allow_nonref
+
+If C<$enable> is true (or missing), then the C<encode> method can convert a
+non-reference into its corresponding string, number or null JSON value,
+which is an extension to RFC4627. Likewise, C<decode> will accept those JSON
+values instead of croaking.
+
+If C<$enable> is false, then the C<encode> method will croak if it isn't
+passed an arrayref or hashref, as JSON texts must either be an object
+or array. Likewise, C<decode> will croak if given something that is not a
+JSON object or array.
+
+Example, encode a Perl scalar as JSON value with enabled C<allow_nonref>,
+resulting in an invalid JSON text:
+
+   JSON::PP->new->allow_nonref->encode ("Hello, World!")
+   => "Hello, World!"
+
+=head2 allow_unknown
+
+    $json = $json->allow_unknown ([$enable])
+    
+    $enabled = $json->get_allow_unknown
+
+If C<$enable> is true (or missing), then C<encode> will I<not> throw an
+exception when it encounters values it cannot represent in JSON (for
+example, filehandles) but instead will encode a JSON C<null> value. Note
+that blessed objects are not included here and are handled separately by
+c<allow_blessed>.
+
+If C<$enable> is false (the default), then C<encode> will throw an
+exception when it encounters anything it cannot encode as JSON.
+
+This option does not affect C<decode> in any way, and it is recommended to
+leave it off unless you know your communications partner.
+
+=head2 allow_blessed
+
+    $json = $json->allow_blessed([$enable])
+    
+    $enabled = $json->get_allow_blessed
+
+See L<OBJECT SERIALISATION> for details.
+
+If C<$enable> is true (or missing), then the C<encode> method will not
+barf when it encounters a blessed reference that it cannot convert
+otherwise. Instead, a JSON C<null> value is encoded instead of the object.
+
+If C<$enable> is false (the default), then C<encode> will throw an
+exception when it encounters a blessed object that it cannot convert
+otherwise.
+
+This setting has no effect on C<decode>.
+
+=head2 convert_blessed
+
+    $json = $json->convert_blessed([$enable])
+    
+    $enabled = $json->get_convert_blessed
+
+See L<OBJECT SERIALISATION> for details.
+
+If C<$enable> is true (or missing), then C<encode>, upon encountering a
+blessed object, will check for the availability of the C<TO_JSON> method
+on the object's class. If found, it will be called in scalar context and
+the resulting scalar will be encoded instead of the object.
+
+The C<TO_JSON> method may safely call die if it wants. If C<TO_JSON>
+returns other blessed objects, those will be handled in the same
+way. C<TO_JSON> must take care of not causing an endless recursion cycle
+(== crash) in this case. The name of C<TO_JSON> was chosen because other
+methods called by the Perl core (== not by the user of the object) are
+usually in upper case letters and to avoid collisions with any C<to_json>
+function or method.
+
+If C<$enable> is false (the default), then C<encode> will not consider
+this type of conversion.
+
+This setting has no effect on C<decode>.
+
+=head2 filter_json_object
+
+    $json = $json->filter_json_object([$coderef])
+
+When C<$coderef> is specified, it will be called from C<decode> each
+time it decodes a JSON object. The only argument is a reference to the
+newly-created hash. If the code references returns a single scalar (which
+need not be a reference), this value (i.e. a copy of that scalar to avoid
+aliasing) is inserted into the deserialised data structure. If it returns
+an empty list (NOTE: I<not> C<undef>, which is a valid scalar), the
+original deserialised hash will be inserted. This setting can slow down
+decoding considerably.
+
+When C<$coderef> is omitted or undefined, any existing callback will
+be removed and C<decode> will not change the deserialised hash in any
+way.
+
+Example, convert all JSON objects into the integer 5:
+
+   my $js = JSON::PP->new->filter_json_object (sub { 5 });
+   # returns [5]
+   $js->decode ('[{}]'); # the given subroutine takes a hash reference.
+   # throw an exception because allow_nonref is not enabled
+   # so a lone 5 is not allowed.
+   $js->decode ('{"a":1, "b":2}');
+
+=head2 filter_json_single_key_object
+
+    $json = $json->filter_json_single_key_object($key [=> $coderef])
+
+Works remotely similar to C<filter_json_object>, but is only called for
+JSON objects having a single key named C<$key>.
+
+This C<$coderef> is called before the one specified via
+C<filter_json_object>, if any. It gets passed the single value in the JSON
+object. If it returns a single value, it will be inserted into the data
+structure. If it returns nothing (not even C<undef> but the empty list),
+the callback from C<filter_json_object> will be called next, as if no
+single-key callback were specified.
+
+If C<$coderef> is omitted or undefined, the corresponding callback will be
+disabled. There can only ever be one callback for a given key.
+
+As this callback gets called less often then the C<filter_json_object>
+one, decoding speed will not usually suffer as much. Therefore, single-key
+objects make excellent targets to serialise Perl objects into, especially
+as single-key JSON objects are as close to the type-tagged value concept
+as JSON gets (it's basically an ID/VALUE tuple). Of course, JSON does not
+support this in any way, so you need to make sure your data never looks
+like a serialised Perl hash.
+
+Typical names for the single object key are C<__class_whatever__>, or
+C<$__dollars_are_rarely_used__$> or C<}ugly_brace_placement>, or even
+things like C<__class_md5sum(classname)__>, to reduce the risk of clashing
+with real hashes.
+
+Example, decode JSON objects of the form C<< { "__widget__" => <id> } >>
+into the corresponding C<< $WIDGET{<id>} >> object:
+
+   # return whatever is in $WIDGET{5}:
+   JSON::PP
+      ->new
+      ->filter_json_single_key_object (__widget__ => sub {
+            $WIDGET{ $_[0] }
+         })
+      ->decode ('{"__widget__": 5')
+
+   # this can be used with a TO_JSON method in some "widget" class
+   # for serialisation to json:
+   sub WidgetBase::TO_JSON {
+      my ($self) = @_;
+
+      unless ($self->{id}) {
+         $self->{id} = ..get..some..id..;
+         $WIDGET{$self->{id}} = $self;
+      }
+
+      { __widget__ => $self->{id} }
+   }
+
+=head2 shrink
+
+    $json = $json->shrink([$enable])
+    
+    $enabled = $json->get_shrink
+
+If C<$enable> is true (or missing), the string returned by C<encode> will
+be shrunk (i.e. downgraded if possible).
+
+The actual definition of what shrink does might change in future versions,
+but it will always try to save space at the expense of time.
+
+If C<$enable> is false, then JSON::PP does nothing.
+
+=head2 max_depth
+
+    $json = $json->max_depth([$maximum_nesting_depth])
+    
+    $max_depth = $json->get_max_depth
+
+Sets the maximum nesting level (default C<512>) accepted while encoding
+or decoding. If a higher nesting level is detected in JSON text or a Perl
+data structure, then the encoder and decoder will stop and croak at that
+point.
+
+Nesting level is defined by number of hash- or arrayrefs that the encoder
+needs to traverse to reach a given point or the number of C<{> or C<[>
+characters without their matching closing parenthesis crossed to reach a
+given character in a string.
+
+Setting the maximum depth to one disallows any nesting, so that ensures
+that the object is only a single hash/object or array.
+
+If no argument is given, the highest possible setting will be used, which
+is rarely useful.
+
+See L<JSON::XS/SECURITY CONSIDERATIONS> for more info on why this is useful.
+
+=head2 max_size
+
+    $json = $json->max_size([$maximum_string_size])
+    
+    $max_size = $json->get_max_size
+
+Set the maximum length a JSON text may have (in bytes) where decoding is
+being attempted. The default is C<0>, meaning no limit. When C<decode>
+is called on a string that is longer then this many bytes, it will not
+attempt to decode the string but throw an exception. This setting has no
+effect on C<encode> (yet).
+
+If no argument is given, the limit check will be deactivated (same as when
+C<0> is specified).
+
+See L<JSON::XS/SECURITY CONSIDERATIONS> for more info on why this is useful.
+
+=head2 encode
+
+    $json_text = $json->encode($perl_scalar)
+
+Converts the given Perl value or data structure to its JSON
+representation. Croaks on error.
+
+=head2 decode
+
+    $perl_scalar = $json->decode($json_text)
+
+The opposite of C<encode>: expects a JSON text and tries to parse it,
+returning the resulting simple scalar or reference. Croaks on error.
+
+=head2 decode_prefix
+
+    ($perl_scalar, $characters) = $json->decode_prefix($json_text)
+
+This works like the C<decode> method, but instead of raising an exception
+when there is trailing garbage after the first JSON object, it will
+silently stop parsing there and return the number of characters consumed
+so far.
+
+This is useful if your JSON texts are not delimited by an outer protocol
+and you need to know where the JSON text ends.
+
+   JSON::PP->new->decode_prefix ("[1] the tail")
+   => ([1], 3)
+
+=head1 FLAGS FOR JSON::PP ONLY
+
+The following flags and properties are for JSON::PP only. If you use
+any of these, you can't make your application run faster by replacing
+JSON::PP with JSON::XS. If you need these and also speed boost,
+try L<Cpanel::JSON::XS>, a fork of JSON::XS by Reini Urban, which
+supports some of these.
+
+=head2 allow_singlequote
+
+    $json = $json->allow_singlequote([$enable])
+    $enabled = $json->get_allow_singlequote
+
+If C<$enable> is true (or missing), then C<decode> will accept
+invalid JSON texts that contain strings that begin and end with
+single quotation marks. C<encode> will not be affected in anyway.
+I<Be aware that this option makes you accept invalid JSON texts
+as if they were valid!>. I suggest only to use this option to
+parse application-specific files written by humans (configuration
+files, resource files etc.)
+
+If C<$enable> is false (the default), then C<decode> will only accept
+valid JSON texts.
+
+    $json->allow_singlequote->decode(qq|{"foo":'bar'}|);
+    $json->allow_singlequote->decode(qq|{'foo':"bar"}|);
+    $json->allow_singlequote->decode(qq|{'foo':'bar'}|);
+
+=head2 allow_barekey
+
+    $json = $json->allow_barekey([$enable])
+    $enabled = $json->get_allow_barekey
+
+If C<$enable> is true (or missing), then C<decode> will accept
+invalid JSON texts that contain JSON objects whose names don't
+begin and end with quotation marks. C<encode> will not be affected
+in anyway. I<Be aware that this option makes you accept invalid JSON
+texts as if they were valid!>. I suggest only to use this option to
+parse application-specific files written by humans (configuration
+files, resource files etc.)
+
+If C<$enable> is false (the default), then C<decode> will only accept
+valid JSON texts.
+
+    $json->allow_barekey->decode(qq|{foo:"bar"}|);
+
+=head2 allow_bignum
+
+    $json = $json->allow_bignum([$enable])
+    $enabled = $json->get_allow_bignum
+
+If C<$enable> is true (or missing), then C<decode> will convert
+big integers Perl cannot handle as integer into L<Math::BigInt>
+objects and convert floating numbers into L<Math::BigFloat>
+objects. C<encode> will convert C<Math::BigInt> and C<Math::BigFloat>
+objects into JSON numbers.
+
+   $json->allow_nonref->allow_bignum;
+   $bigfloat = $json->decode('2.000000000000000000000000001');
+   print $json->encode($bigfloat);
+   # => 2.000000000000000000000000001
+
+See also L<MAPPING>.
+
+=head2 loose
+
+    $json = $json->loose([$enable])
+    $enabled = $json->get_loose
+
+If C<$enable> is true (or missing), then C<decode> will accept
+invalid JSON texts that contain unescaped [\x00-\x1f\x22\x5c]
+characters. C<encode> will not be affected in anyway.
+I<Be aware that this option makes you accept invalid JSON texts
+as if they were valid!>. I suggest only to use this option to
+parse application-specific files written by humans (configuration
+files, resource files etc.)
+
+If C<$enable> is false (the default), then C<decode> will only accept
+valid JSON texts.
+
+    $json->loose->decode(qq|["abc
+                                   def"]|);
+
+=head2 escape_slash
+
+    $json = $json->escape_slash([$enable])
+    $enabled = $json->get_escape_slash
+
+If C<$enable> is true (or missing), then C<encode> will explicitly
+escape I<slash> (solidus; C<U+002F>) characters to reduce the risk of
+XSS (cross site scripting) that may be caused by C<< </script> >>
+in a JSON text, with the cost of bloating the size of JSON texts.
+
+This option may be useful when you embed JSON in HTML, but embedding
+arbitrary JSON in HTML (by some HTML template toolkit or by string
+interpolation) is risky in general. You must escape necessary
+characters in correct order, depending on the context.
+
+C<decode> will not be affected in anyway.
+
+=head2 indent_length
+
+    $json = $json->indent_length($number_of_spaces)
+    $length = $json->get_indent_length
+
+This option is only useful when you also enable C<indent> or C<pretty>.
+
+JSON::XS indents with three spaces when you C<encode> (if requested
+by C<indent> or C<pretty>), and the number cannot be changed.
+JSON::PP allows you to change/get the number of indent spaces with these
+mutator/accessor. The default number of spaces is three (the same as
+JSON::XS), and the acceptable range is from C<0> (no indentation;
+it'd be better to disable indentation by C<indent(0)>) to C<15>.
+
+=head2 sort_by
+
+    $json = $json->sort_by($code_ref)
+    $json = $json->sort_by($subroutine_name)
+
+If you just want to sort keys (names) in JSON objects when you
+C<encode>, enable C<canonical> option (see above) that allows you to
+sort object keys alphabetically.
+
+If you do need to sort non-alphabetically for whatever reasons,
+you can give a code reference (or a subroutine name) to C<sort_by>,
+then the argument will be passed to Perl's C<sort> built-in function.
+
+As the sorting is done in the JSON::PP scope, you usually need to
+prepend C<JSON::PP::> to the subroutine name, and the special variables
+C<$a> and C<$b> used in the subrontine used by C<sort> function.
+
+Example:
+
+   my %ORDER = (id => 1, class => 2, name => 3);
+   $json->sort_by(sub {
+       ($ORDER{$JSON::PP::a} // 999) <=> ($ORDER{$JSON::PP::b} // 999)
+       or $JSON::PP::a cmp $JSON::PP::b
+   });
+   print $json->encode([
+       {name => 'CPAN', id => 1, href => 'http://cpan.org'}
+   ]);
+   # [{"id":1,"name":"CPAN","href":"http://cpan.org"}]
+
+Note that C<sort_by> affects all the plain hashes in the data structure.
+If you need finer control, C<tie> necessary hashes with a module that
+implements ordered hash (such as L<Hash::Ordered> and L<Tie::IxHash>).
+C<canonical> and C<sort_by> don't affect the key order in C<tie>d
+hashes.
+
+   use Hash::Ordered;
+   tie my %hash, 'Hash::Ordered',
+       (name => 'CPAN', id => 1, href => 'http://cpan.org');
+   print $json->encode([\%hash]);
+   # [{"name":"CPAN","id":1,"href":"http://cpan.org"}] # order is kept
+
+=head1 INCREMENTAL PARSING
+
+This section is also taken from JSON::XS.
+
+In some cases, there is the need for incremental parsing of JSON
+texts. While this module always has to keep both JSON text and resulting
+Perl data structure in memory at one time, it does allow you to parse a
+JSON stream incrementally. It does so by accumulating text until it has
+a full JSON object, which it then can decode. This process is similar to
+using C<decode_prefix> to see if a full JSON object is available, but
+is much more efficient (and can be implemented with a minimum of method
+calls).
+
+JSON::PP will only attempt to parse the JSON text once it is sure it
+has enough text to get a decisive result, using a very simple but
+truly incremental parser. This means that it sometimes won't stop as
+early as the full parser, for example, it doesn't detect mismatched
+parentheses. The only thing it guarantees is that it starts decoding as
+soon as a syntactically valid JSON text has been seen. This means you need
+to set resource limits (e.g. C<max_size>) to ensure the parser will stop
+parsing in the presence if syntax errors.
+
+The following methods implement this incremental parser.
+
+=head2 incr_parse
+
+    $json->incr_parse( [$string] ) # void context
+    
+    $obj_or_undef = $json->incr_parse( [$string] ) # scalar context
+    
+    @obj_or_empty = $json->incr_parse( [$string] ) # list context
+
+This is the central parsing function. It can both append new text and
+extract objects from the stream accumulated so far (both of these
+functions are optional).
+
+If C<$string> is given, then this string is appended to the already
+existing JSON fragment stored in the C<$json> object.
+
+After that, if the function is called in void context, it will simply
+return without doing anything further. This can be used to add more text
+in as many chunks as you want.
+
+If the method is called in scalar context, then it will try to extract
+exactly I<one> JSON object. If that is successful, it will return this
+object, otherwise it will return C<undef>. If there is a parse error,
+this method will croak just as C<decode> would do (one can then use
+C<incr_skip> to skip the erroneous part). This is the most common way of
+using the method.
+
+And finally, in list context, it will try to extract as many objects
+from the stream as it can find and return them, or the empty list
+otherwise. For this to work, there must be no separators (other than
+whitespace) between the JSON objects or arrays, instead they must be
+concatenated back-to-back. If an error occurs, an exception will be
+raised as in the scalar context case. Note that in this case, any
+previously-parsed JSON texts will be lost.
+
+Example: Parse some JSON arrays/objects in a given string and return
+them.
+
+    my @objs = JSON::PP->new->incr_parse ("[5][7][1,2]");
+
+=head2 incr_text
+
+    $lvalue_string = $json->incr_text
+
+This method returns the currently stored JSON fragment as an lvalue, that
+is, you can manipulate it. This I<only> works when a preceding call to
+C<incr_parse> in I<scalar context> successfully returned an object. Under
+all other circumstances you must not call this function (I mean it.
+although in simple tests it might actually work, it I<will> fail under
+real world conditions). As a special exception, you can also call this
+method before having parsed anything.
+
+That means you can only use this function to look at or manipulate text
+before or after complete JSON objects, not while the parser is in the
+middle of parsing a JSON object.
+
+This function is useful in two cases: a) finding the trailing text after a
+JSON object or b) parsing multiple JSON objects separated by non-JSON text
+(such as commas).
+
+=head2 incr_skip
+
+    $json->incr_skip
+
+This will reset the state of the incremental parser and will remove
+the parsed text from the input buffer so far. This is useful after
+C<incr_parse> died, in which case the input buffer and incremental parser
+state is left unchanged, to skip the text parsed so far and to reset the
+parse state.
+
+The difference to C<incr_reset> is that only text until the parse error
+occurred is removed.
+
+=head2 incr_reset
+
+    $json->incr_reset
+
+This completely resets the incremental parser, that is, after this call,
+it will be as if the parser had never parsed anything.
+
+This is useful if you want to repeatedly parse JSON objects and want to
+ignore any trailing data, which means you have to reset the parser after
+each successful decode.
+
+=head1 MAPPING
+
+Most of this section is also taken from JSON::XS.
+
+This section describes how JSON::PP maps Perl values to JSON values and
+vice versa. These mappings are designed to "do the right thing" in most
+circumstances automatically, preserving round-tripping characteristics
+(what you put in comes out as something equivalent).
+
+For the more enlightened: note that in the following descriptions,
+lowercase I<perl> refers to the Perl interpreter, while uppercase I<Perl>
+refers to the abstract Perl language itself.
+
+=head2 JSON -> PERL
+
+=over 4
+
+=item object
+
+A JSON object becomes a reference to a hash in Perl. No ordering of object
+keys is preserved (JSON does not preserve object key ordering itself).
+
+=item array
+
+A JSON array becomes a reference to an array in Perl.
+
+=item string
+
+A JSON string becomes a string scalar in Perl - Unicode codepoints in JSON
+are represented by the same codepoints in the Perl string, so no manual
+decoding is necessary.
+
+=item number
+
+A JSON number becomes either an integer, numeric (floating point) or
+string scalar in perl, depending on its range and any fractional parts. On
+the Perl level, there is no difference between those as Perl handles all
+the conversion details, but an integer may take slightly less memory and
+might represent more values exactly than floating point numbers.
+
+If the number consists of digits only, JSON::PP will try to represent
+it as an integer value. If that fails, it will try to represent it as
+a numeric (floating point) value if that is possible without loss of
+precision. Otherwise it will preserve the number as a string value (in
+which case you lose roundtripping ability, as the JSON number will be
+re-encoded to a JSON string).
+
+Numbers containing a fractional or exponential part will always be
+represented as numeric (floating point) values, possibly at a loss of
+precision (in which case you might lose perfect roundtripping ability, but
+the JSON number will still be re-encoded as a JSON number).
+
+Note that precision is not accuracy - binary floating point values cannot
+represent most decimal fractions exactly, and when converting from and to
+floating point, JSON::PP only guarantees precision up to but not including
+the least significant bit.
+
+When C<allow_bignum> is enabled, big integer values and any numeric
+values will be converted into L<Math::BigInt> and L<Math::BigFloat>
+objects respectively, without becoming string scalars or losing
+precision.
+
+=item true, false
+
+These JSON atoms become C<JSON::PP::true> and C<JSON::PP::false>,
+respectively. They are overloaded to act almost exactly like the numbers
+C<1> and C<0>. You can check whether a scalar is a JSON boolean by using
+the C<JSON::PP::is_bool> function.
+
+=item null
+
+A JSON null atom becomes C<undef> in Perl.
+
+=item shell-style comments (C<< # I<text> >>)
+
+As a nonstandard extension to the JSON syntax that is enabled by the
+C<relaxed> setting, shell-style comments are allowed. They can start
+anywhere outside strings and go till the end of the line.
+
+=back
+
+
+=head2 PERL -> JSON
+
+The mapping from Perl to JSON is slightly more difficult, as Perl is a
+truly typeless language, so we can only guess which JSON type is meant by
+a Perl value.
+
+=over 4
+
+=item hash references
+
+Perl hash references become JSON objects. As there is no inherent
+ordering in hash keys (or JSON objects), they will usually be encoded
+in a pseudo-random order. JSON::PP can optionally sort the hash keys
+(determined by the I<canonical> flag and/or I<sort_by> property), so
+the same data structure will serialise to the same JSON text (given
+same settings and version of JSON::PP), but this incurs a runtime
+overhead and is only rarely useful, e.g. when you want to compare some
+JSON text against another for equality.
+
+=item array references
+
+Perl array references become JSON arrays.
+
+=item other references
+
+Other unblessed references are generally not allowed and will cause an
+exception to be thrown, except for references to the integers C<0> and
+C<1>, which get turned into C<false> and C<true> atoms in JSON. You can
+also use C<JSON::PP::false> and C<JSON::PP::true> to improve
+readability.
+
+   to_json [\0, JSON::PP::true]      # yields [false,true]
+
+=item JSON::PP::true, JSON::PP::false
+
+These special values become JSON true and JSON false values,
+respectively. You can also use C<\1> and C<\0> directly if you want.
+
+=item JSON::PP::null
+
+This special value becomes JSON null.
+
+=item blessed objects
+
+Blessed objects are not directly representable in JSON, but C<JSON::PP>
+allows various ways of handling objects. See L<OBJECT SERIALISATION>,
+below, for details.
+
+=item simple scalars
+
+Simple Perl scalars (any scalar that is not a reference) are the most
+difficult objects to encode: JSON::PP will encode undefined scalars as
+JSON C<null> values, scalars that have last been used in a string context
+before encoding as JSON strings, and anything else as number value:
+
+   # dump as number
+   encode_json [2]                      # yields [2]
+   encode_json [-3.0e17]                # yields [-3e+17]
+   my $value = 5; encode_json [$value]  # yields [5]
+
+   # used as string, so dump as string
+   print $value;
+   encode_json [$value]                 # yields ["5"]
+
+   # undef becomes null
+   encode_json [undef]                  # yields [null]
+
+You can force the type to be a string by stringifying it:
+
+   my $x = 3.1; # some variable containing a number
+   "$x";        # stringified
+   $x .= "";    # another, more awkward way to stringify
+   print $x;    # perl does it for you, too, quite often
+                # (but for older perls)
+
+You can force the type to be a number by numifying it:
+
+   my $x = "3"; # some variable containing a string
+   $x += 0;     # numify it, ensuring it will be dumped as a number
+   $x *= 1;     # same thing, the choice is yours.
+
+You cannot currently force the type in other, less obscure, ways.
+
+Note that numerical precision has the same meaning as under Perl (so
+binary to decimal conversion follows the same rules as in Perl, which
+can differ to other languages). Also, your perl interpreter might expose
+extensions to the floating point numbers of your platform, such as
+infinities or NaN's - these cannot be represented in JSON, and it is an
+error to pass those in.
+
+JSON::PP (and JSON::XS) trusts what you pass to C<encode> method
+(or C<encode_json> function) is a clean, validated data structure with
+values that can be represented as valid JSON values only, because it's
+not from an external data source (as opposed to JSON texts you pass to
+C<decode> or C<decode_json>, which JSON::PP considers tainted and
+doesn't trust). As JSON::PP doesn't know exactly what you and consumers
+of your JSON texts want the unexpected values to be (you may want to
+convert them into null, or to stringify them with or without
+normalisation (string representation of infinities/NaN may vary
+depending on platforms), or to croak without conversion), you're advised
+to do what you and your consumers need before you encode, and also not
+to numify values that may start with values that look like a number
+(including infinities/NaN), without validating.
+
+=back
+
+=head2 OBJECT SERIALISATION
+
+As for Perl objects, JSON::PP only supports a pure JSON representation (without the ability to deserialise the object automatically again).
+
+=head3 SERIALISATION
+
+What happens when C<JSON::PP> encounters a Perl object depends on the
+C<allow_blessed>, C<convert_blessed> and C<allow_bignum> settings, which are
+used in this order:
+
+=over 4
+
+=item 1. C<convert_blessed> is enabled and the object has a C<TO_JSON> method.
+
+In this case, the C<TO_JSON> method of the object is invoked in scalar
+context. It must return a single scalar that can be directly encoded into
+JSON. This scalar replaces the object in the JSON text.
+
+For example, the following C<TO_JSON> method will convert all L<URI>
+objects to JSON strings when serialised. The fact that these values
+originally were L<URI> objects is lost.
+
+   sub URI::TO_JSON {
+      my ($uri) = @_;
+      $uri->as_string
+   }
+
+=item 2. C<allow_bignum> is enabled and the object is a C<Math::BigInt> or C<Math::BigFloat>.
+
+The object will be serialised as a JSON number value.
+
+=item 3. C<allow_blessed> is enabled.
+
+The object will be serialised as a JSON null value.
+
+=item 4. none of the above
+
+If none of the settings are enabled or the respective methods are missing,
+C<JSON::PP> throws an exception.
+
+=back
+
+=head1 ENCODING/CODESET FLAG NOTES
+
+This section is taken from JSON::XS.
+
+The interested reader might have seen a number of flags that signify
+encodings or codesets - C<utf8>, C<latin1> and C<ascii>. There seems to be
+some confusion on what these do, so here is a short comparison:
+
+C<utf8> controls whether the JSON text created by C<encode> (and expected
+by C<decode>) is UTF-8 encoded or not, while C<latin1> and C<ascii> only
+control whether C<encode> escapes character values outside their respective
+codeset range. Neither of these flags conflict with each other, although
+some combinations make less sense than others.
+
+Care has been taken to make all flags symmetrical with respect to
+C<encode> and C<decode>, that is, texts encoded with any combination of
+these flag values will be correctly decoded when the same flags are used
+- in general, if you use different flag settings while encoding vs. when
+decoding you likely have a bug somewhere.
+
+Below comes a verbose discussion of these flags. Note that a "codeset" is
+simply an abstract set of character-codepoint pairs, while an encoding
+takes those codepoint numbers and I<encodes> them, in our case into
+octets. Unicode is (among other things) a codeset, UTF-8 is an encoding,
+and ISO-8859-1 (= latin 1) and ASCII are both codesets I<and> encodings at
+the same time, which can be confusing.
+
+=over 4
+
+=item C<utf8> flag disabled
+
+When C<utf8> is disabled (the default), then C<encode>/C<decode> generate
+and expect Unicode strings, that is, characters with high ordinal Unicode
+values (> 255) will be encoded as such characters, and likewise such
+characters are decoded as-is, no changes to them will be done, except
+"(re-)interpreting" them as Unicode codepoints or Unicode characters,
+respectively (to Perl, these are the same thing in strings unless you do
+funny/weird/dumb stuff).
+
+This is useful when you want to do the encoding yourself (e.g. when you
+want to have UTF-16 encoded JSON texts) or when some other layer does
+the encoding for you (for example, when printing to a terminal using a
+filehandle that transparently encodes to UTF-8 you certainly do NOT want
+to UTF-8 encode your data first and have Perl encode it another time).
+
+=item C<utf8> flag enabled
+
+If the C<utf8>-flag is enabled, C<encode>/C<decode> will encode all
+characters using the corresponding UTF-8 multi-byte sequence, and will
+expect your input strings to be encoded as UTF-8, that is, no "character"
+of the input string must have any value > 255, as UTF-8 does not allow
+that.
+
+The C<utf8> flag therefore switches between two modes: disabled means you
+will get a Unicode string in Perl, enabled means you get an UTF-8 encoded
+octet/binary string in Perl.
+
+=item C<latin1> or C<ascii> flags enabled
+
+With C<latin1> (or C<ascii>) enabled, C<encode> will escape characters
+with ordinal values > 255 (> 127 with C<ascii>) and encode the remaining
+characters as specified by the C<utf8> flag.
+
+If C<utf8> is disabled, then the result is also correctly encoded in those
+character sets (as both are proper subsets of Unicode, meaning that a
+Unicode string with all character values < 256 is the same thing as a
+ISO-8859-1 string, and a Unicode string with all character values < 128 is
+the same thing as an ASCII string in Perl).
+
+If C<utf8> is enabled, you still get a correct UTF-8-encoded string,
+regardless of these flags, just some more characters will be escaped using
+C<\uXXXX> then before.
+
+Note that ISO-8859-1-I<encoded> strings are not compatible with UTF-8
+encoding, while ASCII-encoded strings are. That is because the ISO-8859-1
+encoding is NOT a subset of UTF-8 (despite the ISO-8859-1 I<codeset> being
+a subset of Unicode), while ASCII is.
+
+Surprisingly, C<decode> will ignore these flags and so treat all input
+values as governed by the C<utf8> flag. If it is disabled, this allows you
+to decode ISO-8859-1- and ASCII-encoded strings, as both strict subsets of
+Unicode. If it is enabled, you can correctly decode UTF-8 encoded strings.
+
+So neither C<latin1> nor C<ascii> are incompatible with the C<utf8> flag -
+they only govern when the JSON output engine escapes a character or not.
+
+The main use for C<latin1> is to relatively efficiently store binary data
+as JSON, at the expense of breaking compatibility with most JSON decoders.
+
+The main use for C<ascii> is to force the output to not contain characters
+with values > 127, which means you can interpret the resulting string
+as UTF-8, ISO-8859-1, ASCII, KOI8-R or most about any character set and
+8-bit-encoding, and still get the same data structure back. This is useful
+when your channel for JSON transfer is not 8-bit clean or the encoding
+might be mangled in between (e.g. in mail), and works because ASCII is a
+proper subset of most 8-bit and multibyte encodings in use in the world.
+
+=back
+
+=head1 SEE ALSO
+
+The F<json_pp> command line utility for quick experiments.
+
+L<JSON::XS>, L<Cpanel::JSON::XS>, and L<JSON::Tiny> for faster alternatives.
+L<JSON> and L<JSON::MaybeXS> for easy migration.
+
+L<JSON::backportPP::Compat5005> and L<JSON::backportPP::Compat5006> for older perl users.
+
+RFC4627 (L<http://www.ietf.org/rfc/rfc4627.txt>)
+
+=head1 AUTHOR
+
+Makamaka Hannyaharamitu, E<lt>makamaka[at]cpan.orgE<gt>
+
+
+=head1 COPYRIGHT AND LICENSE
+
+Copyright 2007-2016 by Makamaka Hannyaharamitu
+
+This library is free software; you can redistribute it and/or modify
+it under the same terms as Perl itself. 
+
+=cut
diff --git a/Master/tlpkg/tlperl/site/lib/JSON/backportPP/Boolean.pm b/Master/tlpkg/tlperl/site/lib/JSON/backportPP/Boolean.pm
new file mode 100644
index 00000000000..f1c9d526790
--- /dev/null
+++ b/Master/tlpkg/tlperl/site/lib/JSON/backportPP/Boolean.pm
@@ -0,0 +1,36 @@
+package # This is JSON::backportPP
+    JSON::PP::Boolean;
+
+use strict;
+use overload (
+    "0+"     => sub { ${$_[0]} },
+    "++"     => sub { $_[0] = ${$_[0]} + 1 },
+    "--"     => sub { $_[0] = ${$_[0]} - 1 },
+    fallback => 1,
+);
+
+$JSON::backportPP::Boolean::VERSION = '2.94';
+
+1;
+
+__END__
+
+=head1 NAME
+
+JSON::PP::Boolean - dummy module providing JSON::PP::Boolean
+
+=head1 SYNOPSIS
+
+ # do not "use" yourself
+
+=head1 DESCRIPTION
+
+This module exists only to provide overload resolution for Storable and similar modules. See
+L<JSON::PP> for more info about this class.
+
+=head1 AUTHOR
+
+This idea is from L<JSON::XS::Boolean> written by Marc Lehmann <schmorp[at]schmorp.de>
+
+=cut
+
diff --git a/Master/tlpkg/tlperl/site/lib/JSON/backportPP/Compat5005.pm b/Master/tlpkg/tlperl/site/lib/JSON/backportPP/Compat5005.pm
new file mode 100644
index 00000000000..139990edff0
--- /dev/null
+++ b/Master/tlpkg/tlperl/site/lib/JSON/backportPP/Compat5005.pm
@@ -0,0 +1,131 @@
+package # This is JSON::backportPP
+    JSON::backportPP5005;
+
+use 5.005;
+use strict;
+
+my @properties;
+
+$JSON::PP5005::VERSION = '1.10';
+
+BEGIN {
+
+    sub utf8::is_utf8 {
+        0; # It is considered that UTF8 flag off for Perl 5.005.
+    }
+
+    sub utf8::upgrade {
+    }
+
+    sub utf8::downgrade {
+        1; # must always return true.
+    }
+
+    sub utf8::encode  {
+    }
+
+    sub utf8::decode {
+    }
+
+    *JSON::PP::JSON_PP_encode_ascii      = \&_encode_ascii;
+    *JSON::PP::JSON_PP_encode_latin1     = \&_encode_latin1;
+    *JSON::PP::JSON_PP_decode_surrogates = \&_decode_surrogates;
+    *JSON::PP::JSON_PP_decode_unicode    = \&_decode_unicode;
+
+    # missing in B module.
+    sub B::SVp_IOK () { 0x01000000; }
+    sub B::SVp_NOK () { 0x02000000; }
+    sub B::SVp_POK () { 0x04000000; }
+
+    $INC{'bytes.pm'} = 1; # dummy
+}
+
+
+
+sub _encode_ascii {
+    join('', map { $_ <= 127 ? chr($_) : sprintf('\u%04x', $_) } unpack('C*', $_[0]) );
+}
+
+
+sub _encode_latin1 {
+    join('', map { chr($_) } unpack('C*', $_[0]) );
+}
+
+
+sub _decode_surrogates { # from http://homepage1.nifty.com/nomenclator/unicode/ucs_utf.htm
+    my $uni = 0x10000 + (hex($_[0]) - 0xD800) * 0x400 + (hex($_[1]) - 0xDC00); # from perlunicode
+    my $bit = unpack('B32', pack('N', $uni));
+
+    if ( $bit =~ /^00000000000(...)(......)(......)(......)$/ ) {
+        my ($w, $x, $y, $z) = ($1, $2, $3, $4);
+        return pack('B*', sprintf('11110%s10%s10%s10%s', $w, $x, $y, $z));
+    }
+    else {
+        Carp::croak("Invalid surrogate pair");
+    }
+}
+
+
+sub _decode_unicode {
+    my ($u) = @_;
+    my ($utf8bit);
+
+    if ( $u =~ /^00([89a-f][0-9a-f])$/i ) { # 0x80-0xff
+         return pack( 'H2', $1 );
+    }
+
+    my $bit = unpack("B*", pack("H*", $u));
+
+    if ( $bit =~ /^00000(.....)(......)$/ ) {
+        $utf8bit = sprintf('110%s10%s', $1, $2);
+    }
+    elsif ( $bit =~ /^(....)(......)(......)$/ ) {
+        $utf8bit = sprintf('1110%s10%s10%s', $1, $2, $3);
+    }
+    else {
+        Carp::croak("Invalid escaped unicode");
+    }
+
+    return pack('B*', $utf8bit);
+}
+
+
+sub JSON::PP::incr_text {
+    $_[0]->{_incr_parser} ||= JSON::PP::IncrParser->new;
+
+    if ( $_[0]->{_incr_parser}->{incr_parsing} ) {
+        Carp::croak("incr_text can not be called when the incremental parser already started parsing");
+    }
+
+    $_[0]->{_incr_parser}->{incr_text} = $_[1] if ( @_ > 1 );
+    $_[0]->{_incr_parser}->{incr_text};
+}
+
+
+1;
+__END__
+
+=pod
+
+=head1 NAME
+
+JSON::PP5005 - Helper module in using JSON::PP in Perl 5.005
+
+=head1 DESCRIPTION
+
+JSON::PP calls internally.
+
+=head1 AUTHOR
+
+Makamaka Hannyaharamitu, E<lt>makamaka[at]cpan.orgE<gt>
+
+
+=head1 COPYRIGHT AND LICENSE
+
+Copyright 2007-2012 by Makamaka Hannyaharamitu
+
+This library is free software; you can redistribute it and/or modify
+it under the same terms as Perl itself. 
+
+=cut
+
diff --git a/Master/tlpkg/tlperl/site/lib/JSON/backportPP/Compat5006.pm b/Master/tlpkg/tlperl/site/lib/JSON/backportPP/Compat5006.pm
new file mode 100644
index 00000000000..7736fd8debc
--- /dev/null
+++ b/Master/tlpkg/tlperl/site/lib/JSON/backportPP/Compat5006.pm
@@ -0,0 +1,173 @@
+package # This is JSON::backportPP
+    JSON::backportPP56;
+
+use 5.006;
+use strict;
+
+my @properties;
+
+$JSON::PP56::VERSION = '1.08';
+
+BEGIN {
+
+    sub utf8::is_utf8 {
+        my $len =  length $_[0]; # char length
+        {
+            use bytes; #  byte length;
+            return $len != length $_[0]; # if !=, UTF8-flagged on.
+        }
+    }
+
+
+    sub utf8::upgrade {
+        ; # noop;
+    }
+
+
+    sub utf8::downgrade ($;$) {
+        return 1 unless ( utf8::is_utf8( $_[0] ) );
+
+        if ( _is_valid_utf8( $_[0] ) ) {
+            my $downgrade;
+            for my $c ( unpack( "U*", $_[0] ) ) {
+                if ( $c < 256 ) {
+                    $downgrade .= pack("C", $c);
+                }
+                else {
+                    $downgrade .= pack("U", $c);
+                }
+            }
+            $_[0] = $downgrade;
+            return 1;
+        }
+        else {
+            Carp::croak("Wide character in subroutine entry") unless ( $_[1] );
+            0;
+        }
+    }
+
+
+    sub utf8::encode ($) { # UTF8 flag off
+        if ( utf8::is_utf8( $_[0] ) ) {
+            $_[0] = pack( "C*", unpack( "C*", $_[0] ) );
+        }
+        else {
+            $_[0] = pack( "U*", unpack( "C*", $_[0] ) );
+            $_[0] = pack( "C*", unpack( "C*", $_[0] ) );
+        }
+    }
+
+
+    sub utf8::decode ($) { # UTF8 flag on
+        if ( _is_valid_utf8( $_[0] ) ) {
+            utf8::downgrade( $_[0] );
+            $_[0] = pack( "U*", unpack( "U*", $_[0] ) );
+        }
+    }
+
+
+    *JSON::PP::JSON_PP_encode_ascii      = \&_encode_ascii;
+    *JSON::PP::JSON_PP_encode_latin1     = \&_encode_latin1;
+    *JSON::PP::JSON_PP_decode_surrogates = \&JSON::PP::_decode_surrogates;
+    *JSON::PP::JSON_PP_decode_unicode    = \&JSON::PP::_decode_unicode;
+
+    unless ( defined &B::SVp_NOK ) { # missing in B module.
+        eval q{ sub B::SVp_NOK () { 0x02000000; } };
+    }
+
+}
+
+
+
+sub _encode_ascii {
+    join('',
+        map {
+            $_ <= 127 ?
+                chr($_) :
+            $_ <= 65535 ?
+                sprintf('\u%04x', $_) : sprintf('\u%x\u%x', JSON::PP::_encode_surrogates($_));
+        } _unpack_emu($_[0])
+    );
+}
+
+
+sub _encode_latin1 {
+    join('',
+        map {
+            $_ <= 255 ?
+                chr($_) :
+            $_ <= 65535 ?
+                sprintf('\u%04x', $_) : sprintf('\u%x\u%x', JSON::PP::_encode_surrogates($_));
+        } _unpack_emu($_[0])
+    );
+}
+
+
+sub _unpack_emu { # for Perl 5.6 unpack warnings
+    return   !utf8::is_utf8($_[0]) ? unpack('C*', $_[0]) 
+           : _is_valid_utf8($_[0]) ? unpack('U*', $_[0])
+           : unpack('C*', $_[0]);
+}
+
+
+sub _is_valid_utf8 {
+    my $str = $_[0];
+    my $is_utf8;
+
+    while ($str =~ /(?:
+          (
+             [\x00-\x7F]
+            |[\xC2-\xDF][\x80-\xBF]
+            |[\xE0][\xA0-\xBF][\x80-\xBF]
+            |[\xE1-\xEC][\x80-\xBF][\x80-\xBF]
+            |[\xED][\x80-\x9F][\x80-\xBF]
+            |[\xEE-\xEF][\x80-\xBF][\x80-\xBF]
+            |[\xF0][\x90-\xBF][\x80-\xBF][\x80-\xBF]
+            |[\xF1-\xF3][\x80-\xBF][\x80-\xBF][\x80-\xBF]
+            |[\xF4][\x80-\x8F][\x80-\xBF][\x80-\xBF]
+          )
+        | (.)
+    )/xg)
+    {
+        if (defined $1) {
+            $is_utf8 = 1 if (!defined $is_utf8);
+        }
+        else {
+            $is_utf8 = 0 if (!defined $is_utf8);
+            if ($is_utf8) { # eventually, not utf8
+                return;
+            }
+        }
+    }
+
+    return $is_utf8;
+}
+
+
+1;
+__END__
+
+=pod
+
+=head1 NAME
+
+JSON::PP56 - Helper module in using JSON::PP in Perl 5.6
+
+=head1 DESCRIPTION
+
+JSON::PP calls internally.
+
+=head1 AUTHOR
+
+Makamaka Hannyaharamitu, E<lt>makamaka[at]cpan.orgE<gt>
+
+
+=head1 COPYRIGHT AND LICENSE
+
+Copyright 2007-2012 by Makamaka Hannyaharamitu
+
+This library is free software; you can redistribute it and/or modify
+it under the same terms as Perl itself. 
+
+=cut
+
diff --git a/Master/tlpkg/tlperl/site/lib/Types/Serialiser.pm b/Master/tlpkg/tlperl/site/lib/Types/Serialiser.pm
new file mode 100644
index 00000000000..7faa1d9b0bd
--- /dev/null
+++ b/Master/tlpkg/tlperl/site/lib/Types/Serialiser.pm
@@ -0,0 +1,254 @@
+=head1 NAME
+
+Types::Serialiser - simple data types for common serialisation formats
+
+=encoding utf-8
+
+=head1 SYNOPSIS
+
+=head1 DESCRIPTION
+
+This module provides some extra datatypes that are used by common
+serialisation formats such as JSON or CBOR. The idea is to have a
+repository of simple/small constants and containers that can be shared by
+different implementations so they become interoperable between each other.
+
+=cut
+
+package Types::Serialiser;
+
+use common::sense; # required to suppress annoying warnings
+
+our $VERSION = '1.0';
+
+=head1 SIMPLE SCALAR CONSTANTS
+
+Simple scalar constants are values that are overloaded to act like simple
+Perl values, but have (class) type to differentiate them from normal Perl
+scalars. This is necessary because these have different representations in
+the serialisation formats.
+
+=head2 BOOLEANS (Types::Serialiser::Boolean class)
+
+This type has only two instances, true and false. A natural representation
+for these in Perl is C<1> and C<0>, but serialisation formats need to be
+able to differentiate between them and mere numbers.
+
+=over 4
+
+=item $Types::Serialiser::true, Types::Serialiser::true
+
+This value represents the "true" value. In most contexts is acts like
+the number C<1>. It is up to you whether you use the variable form
+(C<$Types::Serialiser::true>) or the constant form (C<Types::Serialiser::true>).
+
+The constant is represented as a reference to a scalar containing C<1> -
+implementations are allowed to directly test for this.
+
+=item $Types::Serialiser::false, Types::Serialiser::false
+
+This value represents the "false" value. In most contexts is acts like
+the number C<0>. It is up to you whether you use the variable form
+(C<$Types::Serialiser::false>) or the constant form (C<Types::Serialiser::false>).
+
+The constant is represented as a reference to a scalar containing C<0> -
+implementations are allowed to directly test for this.
+
+=item $is_bool = Types::Serialiser::is_bool $value
+
+Returns true iff the C<$value> is either C<$Types::Serialiser::true> or
+C<$Types::Serialiser::false>.
+
+For example, you could differentiate between a perl true value and a
+C<Types::Serialiser::true> by using this:
+
+   $value && Types::Serialiser::is_bool $value
+
+=item $is_true = Types::Serialiser::is_true $value
+
+Returns true iff C<$value> is C<$Types::Serialiser::true>.
+
+=item $is_false = Types::Serialiser::is_false $value
+
+Returns false iff C<$value> is C<$Types::Serialiser::false>.
+
+=back
+
+=head2 ERROR (Types::Serialiser::Error class)
+
+This class has only a single instance, C<error>. It is used to signal
+an encoding or decoding error. In CBOR for example, and object that
+couldn't be encoded will be represented by a CBOR undefined value, which
+is represented by the error value in Perl.
+
+=over 4
+
+=item $Types::Serialiser::error, Types::Serialiser::error
+
+This value represents the "error" value. Accessing values of this type
+will throw an exception.
+
+The constant is represented as a reference to a scalar containing C<undef>
+- implementations are allowed to directly test for this.
+
+=item $is_error = Types::Serialiser::is_error $value
+
+Returns false iff C<$value> is C<$Types::Serialiser::error>.
+
+=back
+
+=cut
+
+BEGIN {
+   # for historical reasons, and to avoid extra dependencies in JSON::PP,
+   # we alias *Types::Serialiser::Boolean with JSON::PP::Boolean.
+   package JSON::PP::Boolean;
+
+   *Types::Serialiser::Boolean:: = *JSON::PP::Boolean::;
+}
+
+{
+   # this must done before blessing to work around bugs
+   # in perl < 5.18 (it seems to be fixed in 5.18).
+   package Types::Serialiser::BooleanBase;
+
+   use overload
+      "0+"     => sub { ${$_[0]} },
+      "++"     => sub { $_[0] = ${$_[0]} + 1 },
+      "--"     => sub { $_[0] = ${$_[0]} - 1 },
+      fallback => 1;
+
+   @Types::Serialiser::Boolean::ISA = Types::Serialiser::BooleanBase::;
+}
+
+our $true  = do { bless \(my $dummy = 1), Types::Serialiser::Boolean:: };
+our $false = do { bless \(my $dummy = 0), Types::Serialiser::Boolean:: };
+our $error = do { bless \(my $dummy    ), Types::Serialiser::Error::   };
+
+sub true  () { $true  }
+sub false () { $false }
+sub error () { $error }
+
+sub is_bool  ($) {           UNIVERSAL::isa $_[0], Types::Serialiser::Boolean:: }
+sub is_true  ($) {  $_[0] && UNIVERSAL::isa $_[0], Types::Serialiser::Boolean:: }
+sub is_false ($) { !$_[0] && UNIVERSAL::isa $_[0], Types::Serialiser::Boolean:: }
+sub is_error ($) {           UNIVERSAL::isa $_[0], Types::Serialiser::Error::   }
+
+package Types::Serialiser::Error;
+
+sub error {
+   require Carp;
+   Carp::croak ("caught attempt to use the Types::Serialiser::error value");
+};
+
+use overload
+   "0+"     => \&error,
+   "++"     => \&error,
+   "--"     => \&error,
+   fallback => 1;
+
+=head1 NOTES FOR XS USERS
+
+The recommended way to detect whether a scalar is one of these objects
+is to check whether the stash is the C<Types::Serialiser::Boolean> or
+C<Types::Serialiser::Error> stash, and then follow the scalar reference to
+see if it's C<1> (true), C<0> (false) or C<undef> (error).
+
+While it is possible to use an isa test, directly comparing stash pointers
+is faster and guaranteed to work.
+
+For historical reasons, the C<Types::Serialiser::Boolean> stash is
+just an alias for C<JSON::PP::Boolean>. When printed, the classname
+with usually be C<JSON::PP::Boolean>, but isa tests and stash pointer
+comparison will normally work correctly (i.e. Types::Serialiser::true ISA
+JSON::PP::Boolean, but also ISA Types::Serialiser::Boolean).
+
+=head1 A GENERIC OBJECT SERIALIATION PROTOCOL
+
+This section explains the object serialisation protocol used by
+L<CBOR::XS>. It is meant to be generic enough to support any kind of
+generic object serialiser.
+
+This protocol is called "the Types::Serialiser object serialisation
+protocol".
+
+=head2 ENCODING
+
+When the encoder encounters an object that it cannot otherwise encode (for
+example, L<CBOR::XS> can encode a few special types itself, and will first
+attempt to use the special C<TO_CBOR> serialisation protocol), it will
+look up the C<FREEZE> method on the object.
+
+Note that the C<FREEZE> method will normally be called I<during> encoding,
+and I<MUST NOT> change the data structure that is being encoded in any
+way, or it might cause memory corruption or worse.
+
+If it exists, it will call it with two arguments: the object to serialise,
+and a constant string that indicates the name of the data model. For
+example L<CBOR::XS> uses C<CBOR>, and the L<JSON> and L<JSON::XS> modules
+(or any other JSON serialiser), would use C<JSON> as second argument.
+
+The C<FREEZE> method can then return zero or more values to identify the
+object instance. The serialiser is then supposed to encode the class name
+and all of these return values (which must be encodable in the format)
+using the relevant form for Perl objects. In CBOR for example, there is a
+registered tag number for encoded perl objects.
+
+The values that C<FREEZE> returns must be serialisable with the serialiser
+that calls it. Therefore, it is recommended to use simple types such as
+strings and numbers, and maybe array references and hashes (basically, the
+JSON data model). You can always use a more complex format for a specific
+data model by checking the second argument, the data model.
+
+The "data model" is not the same as the "data format" - the data model
+indicates what types and kinds of return values can be returned from
+C<FREEZE>. For example, in C<CBOR> it is permissible to return tagged CBOR
+values, while JSON does not support these at all, so C<JSON> would be a
+valid (but too limited) data model name for C<CBOR::XS>. similarly, a
+serialising format that supports more or less the same data model as JSON
+could use C<JSON> as data model without losing anything.
+
+=head2 DECODING
+
+When the decoder then encounters such an encoded perl object, it should
+look up the C<THAW> method on the stored classname, and invoke it with the
+classname, the constant string to identify the data model/data format, and
+all the return values returned by C<FREEZE>.
+
+=head2 EXAMPLES
+
+See the C<OBJECT SERIALISATION> section in the L<CBOR::XS> manpage for
+more details, an example implementation, and code examples.
+
+Here is an example C<FREEZE>/C<THAW> method pair:
+
+   sub My::Object::FREEZE {
+      my ($self, $model) = @_;
+
+      ($self->{type}, $self->{id}, $self->{variant})
+   }
+
+   sub My::Object::THAW {
+      my ($class, $model, $type, $id, $variant) = @_;
+
+      $class->new (type => $type, id => $id, variant => $variant)
+   }
+
+=head1 BUGS
+
+The use of L<overload> makes this module much heavier than it should be
+(on my system, this module: 4kB RSS, overload: 260kB RSS).
+
+=head1 SEE ALSO
+
+Currently, L<JSON::XS> and L<CBOR::XS> use these types.
+
+=head1 AUTHOR
+
+ Marc Lehmann <schmorp@schmorp.de>
+ http://home.schmorp.de/
+
+=cut
+
+1
+
diff --git a/Master/tlpkg/tlperl/site/lib/Types/Serialiser/Error.pm b/Master/tlpkg/tlperl/site/lib/Types/Serialiser/Error.pm
new file mode 100644
index 00000000000..3e88821ad39
--- /dev/null
+++ b/Master/tlpkg/tlperl/site/lib/Types/Serialiser/Error.pm
@@ -0,0 +1,27 @@
+=head1 NAME
+
+Types::Serialiser::Error - dummy module for Types::Serialiser
+
+=head1 SYNOPSIS
+
+ # do not "use" yourself
+
+=head1 DESCRIPTION
+
+This module exists only to provide overload resolution for Storable and
+similar modules that assume that class name equals module name. See
+L<Types::Serialiser> for more info about this class.
+
+=cut
+
+use Types::Serialiser ();
+
+=head1 AUTHOR
+
+ Marc Lehmann <schmorp@schmorp.de>
+ http://home.schmorp.de/
+
+=cut
+
+1
+
diff --git a/Master/tlpkg/tlperl/site/lib/auto/Canary/Stability/.packlist b/Master/tlpkg/tlperl/site/lib/auto/Canary/Stability/.packlist
new file mode 100644
index 00000000000..2cfb51c8d4d
--- /dev/null
+++ b/Master/tlpkg/tlperl/site/lib/auto/Canary/Stability/.packlist
@@ -0,0 +1 @@
+C:\tlperl\site\lib\Canary\Stability.pm

diff --git a/Master/tlpkg/tlperl/site/lib/auto/JSON/.packlist b/Master/tlpkg/tlperl/site/lib/auto/JSON/.packlist
new file mode 100644
index 00000000000..ef56faff5aa
--- /dev/null
+++ b/Master/tlpkg/tlperl/site/lib/auto/JSON/.packlist
@@ -0,0 +1,5 @@
+C:\tlperl\site\lib\JSON.pm

+C:\tlperl\site\lib\JSON\backportPP.pm

+C:\tlperl\site\lib\JSON\backportPP\Boolean.pm

+C:\tlperl\site\lib\JSON\backportPP\Compat5005.pm

+C:\tlperl\site\lib\JSON\backportPP\Compat5006.pm

diff --git a/Master/tlpkg/tlperl/site/lib/auto/JSON/XS/.packlist b/Master/tlpkg/tlperl/site/lib/auto/JSON/XS/.packlist
new file mode 100644
index 00000000000..3b09ed2e542
--- /dev/null
+++ b/Master/tlpkg/tlperl/site/lib/auto/JSON/XS/.packlist
@@ -0,0 +1,5 @@
+C:\tlperl\bin\json_xs

+C:\tlperl\bin\json_xs.bat

+C:\tlperl\site\lib\JSON\XS.pm

+C:\tlperl\site\lib\JSON\XS\Boolean.pm

+C:\tlperl\site\lib\auto\JSON\XS\XS.dll

diff --git a/Master/tlpkg/tlperl/site/lib/auto/JSON/XS/XS.dll b/Master/tlpkg/tlperl/site/lib/auto/JSON/XS/XS.dll
new file mode 100644
index 00000000000..5aa4c362230
--- /dev/null
+++ b/Master/tlpkg/tlperl/site/lib/auto/JSON/XS/XS.dll
diff --git a/Master/tlpkg/tlperl/site/lib/auto/Types/Serialiser/.packlist b/Master/tlpkg/tlperl/site/lib/auto/Types/Serialiser/.packlist
new file mode 100644
index 00000000000..67c43ab14db
--- /dev/null
+++ b/Master/tlpkg/tlperl/site/lib/auto/Types/Serialiser/.packlist
@@ -0,0 +1,2 @@
+C:\tlperl\site\lib\Types\Serialiser.pm

+C:\tlperl\site\lib\Types\Serialiser\Error.pm

diff --git a/Master/tlpkg/tlperl/site/lib/auto/common/sense/.packlist b/Master/tlpkg/tlperl/site/lib/auto/common/sense/.packlist
new file mode 100644
index 00000000000..3ec71dd10ac
--- /dev/null
+++ b/Master/tlpkg/tlperl/site/lib/auto/common/sense/.packlist
@@ -0,0 +1,2 @@
+C:\tlperl\site\lib\common\sense.pm

+C:\tlperl\site\lib\common\sense.pod

diff --git a/Master/tlpkg/tlperl/site/lib/common/sense.pm b/Master/tlpkg/tlperl/site/lib/common/sense.pm
new file mode 100644
index 00000000000..14f18a4710b
--- /dev/null
+++ b/Master/tlpkg/tlperl/site/lib/common/sense.pm
@@ -0,0 +1,16 @@
+package common::sense;
+
+our $VERSION = 3.74;
+
+# overload should be included
+
+sub import {
+   local $^W; # work around perl 5.16 spewing out warnings for next statement
+   # use warnings
+   ${^WARNING_BITS} ^= ${^WARNING_BITS} ^ "\x0c\x3f\x33\x00\x0f\xf0\x0f\xc0\xf0\xfc\x33\x00\x00\x00\x0c\x00\x00";
+   # use strict, use utf8; use feature;
+   $^H |= 0x1c820fc0;
+   @^H{qw(feature_fc feature_unicode feature_switch feature_state feature_say feature___SUB__ feature_evalbytes)} = (1) x 7;
+}
+
+1
diff --git a/Master/tlpkg/tlperl/site/lib/common/sense.pod b/Master/tlpkg/tlperl/site/lib/common/sense.pod
new file mode 100644
index 00000000000..1521faf5ced
--- /dev/null
+++ b/Master/tlpkg/tlperl/site/lib/common/sense.pod
@@ -0,0 +1,445 @@
+=head1 NAME
+
+common::sense - save a tree AND a kitten, use common::sense!
+
+=head1 SYNOPSIS
+
+   use common::sense;
+
+   # Supposed to be mostly the same, with much lower memory usage, as:
+  
+   # use utf8;
+   # use strict qw(vars subs);
+   # use feature qw(say state switch);
+   # use feature qw(unicode_strings unicode_eval current_sub fc evalbytes);
+   # no feature qw(array_base);
+   # no warnings;
+   # use warnings qw(FATAL closed threads internal debugging pack
+   #                 portable prototype inplace io pipe unpack malloc
+   #                 glob digit printf layer reserved taint closure
+   #                 semicolon);
+   # no warnings qw(exec newline unopened);
+
+=head1 DESCRIPTION
+
+   “Nothing is more fairly distributed than common sense: no one thinks
+   he needs more of it than he already has.”
+
+   – René Descartes
+
+This module implements some sane defaults for Perl programs, as defined by
+two typical (or not so typical - use your common sense) specimens of Perl
+coders. In fact, after working out details on which warnings and strict
+modes to enable and make fatal, we found that we (and our code written so
+far, and others) fully agree on every option, even though we never used
+warnings before, so it seems this module indeed reflects a "common" sense
+among some long-time Perl coders.
+
+The basic philosophy behind the choices made in common::sense can be
+summarised as: "enforcing strict policies to catch as many bugs as
+possible, while at the same time, not limiting the expressive power
+available to the programmer".
+
+Two typical examples of how this philosophy is applied in practise is the
+handling of uninitialised and malloc warnings:
+
+=over 4
+
+=item I<uninitialised>
+
+C<undef> is a well-defined feature of perl, and enabling warnings for
+using it rarely catches any bugs, but considerably limits you in what you
+can do, so uninitialised warnings are disabled.
+
+=item I<malloc>
+
+Freeing something twice on the C level is a serious bug, usually causing
+memory corruption. It often leads to side effects much later in the
+program and there are no advantages to not reporting this, so malloc
+warnings are fatal by default.
+
+=back
+
+Unfortunately, there is no fine-grained warning control in perl, so often
+whole groups of useful warnings had to be excluded because of a single
+useless warning (for example, perl puts an arbitrary limit on the length
+of text you can match with some regexes before emitting a warning, making
+the whole C<regexp> category useless).
+
+What follows is a more thorough discussion of what this module does,
+and why it does it, and what the advantages (and disadvantages) of this
+approach are.
+
+=head1 RATIONALE
+
+=over 4
+
+=item use utf8
+
+While it's not common sense to write your programs in UTF-8, it's quickly
+becoming the most common encoding, is the designated future default
+encoding for perl sources, and the most convenient encoding available
+(you can do really nice quoting tricks...). Experience has shown that our
+programs were either all pure ascii or utf-8, both of which will stay the
+same.
+
+There are few drawbacks to enabling UTF-8 source code by default (mainly
+some speed hits due to bugs in older versions of perl), so this module
+enables UTF-8 source code encoding by default.
+
+
+=item use strict qw(subs vars)
+
+Using C<use strict> is definitely common sense, but C<use strict
+'refs'> definitely overshoots its usefulness. After almost two
+decades of Perl hacking, we decided that it does more harm than being
+useful. Specifically, constructs like these:
+
+   @{ $var->[0] }
+
+Must be written like this (or similarly), when C<use strict 'refs'> is in
+scope, and C<$var> can legally be C<undef>:
+
+   @{ $var->[0] || [] }
+
+This is annoying, and doesn't shield against obvious mistakes such as
+using C<"">, so one would even have to write (at least for the time
+being):
+
+   @{ defined $var->[0] ? $var->[0] : [] }
+
+... which nobody with a bit of common sense would consider
+writing: clear code is clearly something else.
+
+Curiously enough, sometimes perl is not so strict, as this works even with
+C<use strict> in scope:
+
+   for (@{ $var->[0] }) { ...
+
+If that isn't hypocrisy! And all that from a mere program!
+
+
+=item use feature qw(say state given ...)
+
+We found it annoying that we always have to enable extra features. If
+something breaks because it didn't anticipate future changes, so be
+it. 5.10 broke almost all our XS modules and nobody cared either (or at
+least I know of nobody who really complained about gratuitous changes -
+as opposed to bugs).
+
+Few modules that are not actively maintained work with newer versions of
+Perl, regardless of use feature or not, so a new major perl release means
+changes to many modules - new keywords are just the tip of the iceberg.
+
+If your code isn't alive, it's dead, Jim - be an active maintainer.
+
+But nobody forces you to use those extra features in modules meant for
+older versions of perl - common::sense of course works there as well.
+There is also an important other mode where having additional features by
+default is useful: commandline hacks and internal use scripts: See "much
+reduced typing", below.
+
+There is one notable exception: C<unicode_eval> is not enabled by
+default. In our opinion, C<use feature> had one main effect - newer perl
+versions don't value backwards compatibility and the ability to write
+modules for multiple perl versions much, after all, you can use feature.
+
+C<unicode_eval> doesn't add a new feature, it breaks an existing function.
+
+=item no warnings, but a lot of new errors
+
+Ah, the dreaded warnings. Even worse, the horribly dreaded C<-w>
+switch: Even though we don't care if other people use warnings (and
+certainly there are useful ones), a lot of warnings simply go against the
+spirit of Perl.
+
+Most prominently, the warnings related to C<undef>. There is nothing wrong
+with C<undef>: it has well-defined semantics, it is useful, and spitting
+out warnings you never asked for is just evil.
+
+The result was that every one of our modules did C<no warnings> in the
+past, to avoid somebody accidentally using and forcing his bad standards
+on our code. Of course, this switched off all warnings, even the useful
+ones. Not a good situation. Really, the C<-w> switch should only enable
+warnings for the main program only.
+
+Funnily enough, L<perllexwarn> explicitly mentions C<-w> (and not in a
+favourable way, calling it outright "wrong"), but standard utilities, such
+as L<prove>, or MakeMaker when running C<make test>, still enable them
+blindly.
+
+For version 2 of common::sense, we finally sat down a few hours and went
+through I<every single warning message>, identifying - according to
+common sense - all the useful ones.
+
+This resulted in the rather impressive list in the SYNOPSIS. When we
+weren't sure, we didn't include the warning, so the list might grow in
+the future (we might have made a mistake, too, so the list might shrink
+as well).
+
+Note the presence of C<FATAL> in the list: we do not think that the
+conditions caught by these warnings are worthy of a warning, we I<insist>
+that they are worthy of I<stopping> your program, I<instantly>. They are
+I<bugs>!
+
+Therefore we consider C<common::sense> to be much stricter than C<use
+warnings>, which is good if you are into strict things (we are not,
+actually, but these things tend to be subjective).
+
+After deciding on the list, we ran the module against all of our code that
+uses C<common::sense> (that is almost all of our code), and found only one
+occurrence where one of them caused a problem: one of elmex's (unreleased)
+modules contained:
+
+   $fmt =~ s/([^\s\[]*)\[( [^\]]* )\]/\x0$1\x1$2\x0/xgo;
+
+We quickly agreed that indeed the code should be changed, even though it
+happened to do the right thing when the warning was switched off.
+
+
+=item much reduced typing
+
+Especially with version 2.0 of common::sense, the amount of boilerplate
+code you need to add to get I<this> policy is daunting. Nobody would write
+this out in throwaway scripts, commandline hacks or in quick internal-use
+scripts.
+
+By using common::sense you get a defined set of policies (ours, but maybe
+yours, too, if you accept them), and they are easy to apply to your
+scripts: typing C<use common::sense;> is even shorter than C<use warnings;
+use strict; use feature ...>.
+
+And you can immediately use the features of your installed perl, which
+is more difficult in code you release, but not usually an issue for
+internal-use code (downgrades of your production perl should be rare,
+right?).
+
+
+=item mucho reduced memory usage
+
+Just using all those pragmas mentioned in the SYNOPSIS together wastes
+<blink>I<< B<776> kilobytes >></blink> of precious memory in my perl, for
+I<every single perl process using our code>, which on our machines, is a
+lot. In comparison, this module only uses I<< B<four> >> kilobytes (I even
+had to write it out so it looks like more) of memory on the same platform.
+
+The money/time/effort/electricity invested in these gigabytes (probably
+petabytes globally!) of wasted memory could easily save 42 trees, and a
+kitten!
+
+Unfortunately, until everybody applies more common sense, there will still
+often be modules that pull in the monster pragmas. But one can hope...
+
+=back
+
+=head1 THERE IS NO 'no common::sense'!!!! !!!! !!
+
+This module doesn't offer an unimport. First of all, it wastes even more
+memory, second, and more importantly, who with even a bit of common sense
+would want no common sense?
+
+=head1 STABILITY AND FUTURE VERSIONS
+
+Future versions might change just about everything in this module. We
+might test our modules and upload new ones working with newer versions of
+this module, and leave you standing in the rain because we didn't tell
+you. In fact, we did so when switching from 1.0 to 2.0, which enabled gobs
+of warnings, and made them FATAL on top.
+
+Maybe we will load some nifty modules that try to emulate C<say> or so
+with perls older than 5.10 (this module, of course, should work with older
+perl versions - supporting 5.8 for example is just common sense at this
+time. Maybe not in the future, but of course you can trust our common
+sense to be consistent with, uhm, our opinion).
+
+=head1 WHAT OTHER PEOPLE HAD TO SAY ABOUT THIS MODULE
+
+apeiron
+
+   "... wow"
+   "I hope common::sense is a joke."
+
+crab
+
+   "i wonder how it would be if joerg schilling wrote perl modules."
+
+Adam Kennedy
+
+   "Very interesting, efficient, and potentially something I'd use all the time."
+   [...]
+   "So no common::sense for me, alas."
+
+H.Merijn Brand
+
+   "Just one more reason to drop JSON::XS from my distribution list"
+
+Pista Palo
+
+   "Something in short supply these days..."
+
+Steffen Schwigon
+
+   "This module is quite for sure *not* just a repetition of all the other
+   'use strict, use warnings'-approaches, and it's also not the opposite.
+   [...] And for its chosen middle-way it's also not the worst name ever.
+   And everything is documented."
+
+BKB
+
+   "[Deleted - thanks to Steffen Schwigon for pointing out this review was
+   in error.]"
+
+Somni
+
+   "the arrogance of the guy"
+   "I swear he tacked somenoe else's name onto the module
+   just so he could use the royal 'we' in the documentation"
+
+Anonymous Monk
+
+   "You just gotta love this thing, its got META.json!!!"
+
+dngor
+
+   "Heh.  '"<elmex at ta-sa.org>"'  The quotes are semantic
+   distancing from that e-mail address."
+
+Jerad Pierce
+
+   "Awful name (not a proper pragma), and the SYNOPSIS doesn't tell you
+   anything either. Nor is it clear what features have to do with "common
+   sense" or discipline."
+
+acme
+
+   "THERE IS NO 'no common::sense'!!!! !!!! !!"
+
+apeiron (meta-comment about us commenting^Wquoting his comment)
+
+   "How about quoting this: get a clue, you fucktarded amoeba."
+
+quanth
+
+   "common sense is beautiful, json::xs is fast, Anyevent, EV are fast and
+   furious. I love mlehmannware ;)"
+
+apeiron
+
+   "... it's mlehmann's view of what common sense is. His view of common
+   sense is certainly uncommon, insofar as anyone with a clue disagrees
+   with him."
+
+apeiron (another meta-comment)
+
+   "apeiron wonders if his little informant is here to steal more quotes"
+
+ew73
+
+   "... I never got past the SYNOPSIS before calling it shit."
+   [...]
+   How come no one ever quotes me. :("
+
+chip (not willing to explain his cryptic questions about links in Changes files)
+
+   "I'm willing to ask the question I've asked. I'm not willing to go
+   through the whole dance you apparently have choreographed. Either
+   answer the completely obvious question, or tell me to fuck off again."
+
+=head1 FREQUENTLY ASKED QUESTIONS
+
+Or frequently-come-up confusions.
+
+=over 4
+
+=item Is this module meant to be serious?
+
+Yes, we would have put it under the C<Acme::> namespace otherwise.
+
+=item But the manpage is written in a funny/stupid/... way?
+
+This was meant to make it clear that our common sense is a subjective
+thing and other people can use their own notions, taking the steam out
+of anybody who might be offended (as some people are always offended no
+matter what you do).
+
+This was a failure.
+
+But we hope the manpage still is somewhat entertaining even though it
+explains boring rationale.
+
+=item Why do you impose your conventions on my code?
+
+For some reason people keep thinking that C<common::sense> imposes
+process-wide limits, even though the SYNOPSIS makes it clear that it works
+like other similar modules - i.e. only within the scope that C<use>s them.
+
+So, no, we don't - nobody is forced to use this module, and using a module
+that relies on common::sense does not impose anything on you.
+
+=item Why do you think only your notion of common::sense is valid?
+
+Well, we don't, and have clearly written this in the documentation to
+every single release. We were just faster than anybody else w.r.t. to
+grabbing the namespace.
+
+=item But everybody knows that you have to use strict and use warnings,
+why do you disable them?
+
+Well, we don't do this either - we selectively disagree with the
+usefulness of some warnings over others. This module is aimed at
+experienced Perl programmers, not people migrating from other languages
+who might be surprised about stuff such as C<undef>. On the other hand,
+this does not exclude the usefulness of this module for total newbies, due
+to its strictness in enforcing policy, while at the same time not limiting
+the expressive power of perl.
+
+This module is considerably I<more> strict than the canonical C<use
+strict; use warnings>, as it makes all its warnings fatal in nature, so
+you can not get away with as many things as with the canonical approach.
+
+This was not implemented in version 1.0 because of the daunting number
+of warning categories and the difficulty in getting exactly the set of
+warnings you wish (i.e. look at the SYNOPSIS in how complicated it is to
+get a specific set of warnings - it is not reasonable to put this into
+every module, the maintenance effort would be enormous).
+
+=item But many modules C<use strict> or C<use warnings>, so the memory
+savings do not apply?
+
+I suddenly feel sad...
+
+But yes, that's true. Fortunately C<common::sense> still uses only a
+miniscule amount of RAM.
+
+=item But it adds another dependency to your modules!
+
+It's a fact, yeah. But it's trivial to install, most popular modules have
+many more dependencies. And we consider dependencies a good thing - it
+leads to better APIs, more thought about interworking of modules and so
+on.
+
+=item Why do you use JSON and not YAML for your META.yml?
+
+This is not true - YAML supports a large subset of JSON, and this subset
+is what META.yml is written in, so it would be correct to say "the
+META.yml is written in a common subset of YAML and JSON".
+
+The META.yml follows the YAML, JSON and META.yml specifications, and is
+correctly parsed by CPAN, so if you have trouble with it, the problem is
+likely on your side.
+
+=item But! But!
+
+Yeah, we know.
+
+=back
+
+=head1 AUTHOR
+
+ Marc Lehmann <schmorp@schmorp.de>
+ http://home.schmorp.de/
+
+ Robin Redeker, "<elmex at ta-sa.org>".
+
+=cut
+