new latex pkg pageslts 1.1b (10jun10)

git-svn-id: svn://tug.org/texlive/trunk@18883 c570f23f-e606-0410-a88d-b1316a301751

13 files changed, 7331 insertions, 1 deletions

diff --git a/Master/texmf-dist/doc/latex/pageslts/README b/Master/texmf-dist/doc/latex/pageslts/README
new file mode 100644
index 00000000000..ae5f878ad58
--- /dev/null
+++ b/Master/texmf-dist/doc/latex/pageslts/README
@@ -0,0 +1,224 @@
+README for pagesLTS package, 2010/06/03, v1.1b
+
+
+TABLE OF CONTENTS
+=================
+
+1 Introduction
+2 Download
+3 Installation
+4 Additional Packages
+5 Package Compatibility
+6 Author/Maintainer
+7 Bug Reports
+8 Known Problems
+
+
+1 INTRODUCTION
+==============
+
+This package puts the labels LastPage (\AtEndDocument) and
+VeryLastPage (\AfterLastShipout) into the .aux file,
+allowing the user to refer to the (very) last page of a
+document. This might be particularly useful in places like
+headers or footers.
+When more than one page numbering scheme is used, these
+references do not give the total number of pages. For this
+case the label LastPages is introduced. Additionally, at the
+last page of each page numbering scheme a label
+pagesLTS.<numbering scheme> is placed, where
+<numbering scheme> is e. g. arabic, roman, Roman, alph, or
+Alph. For fnsymbol please use
+\lastpageref{pagesLTS.fnsymbol} instead of
+\pageref{pagesLTS.fnsymbol}. When the same numbering scheme
+is used twice, the page numbers are either reset to one or
+continued automatically, depending on the option given when
+the package is called. The command \theCurrentPage prints
+the current total/absolute page number - in contrast to
+\thepage, which gives only the page name in the current page
+numbering scheme. \theCurrentPageLocal gives the current
+number of pages in the current page numbering scheme.
+\thepage and \theCurrentPageLocal are different e. g. when
+\addtocounter{pageg}{...} or \setcounter{page}{...} were
+used.
+At the first page of the document a label pagesLTS.0 is
+created. This label can be referred to, too. Further labels
+are provided for special cases.
+The alphalph package is supported, i. e. page numbers alph
+or Alph > 26 and fnyambol > 9 can be used (with according
+options set). Even zero and negative page numbers can be
+used with arabic, alph, Alph, roman, Roman, and fnsymbol
+page numbering (with alphalph package and according
+options).
+
+
+2 DOWNLOAD
+==========
+
+`pagesLTS' should become available on CTAN soon:
+  CTAN:macros/latex/contrib/muench/pagesLTS/
+
+Also a ZIP file is provided that contains the files, already
+sorted in a TDS tree (should become available on CTAN soon):
+  CTAN:install/macros/latex/contrib/muench/pagesLTS.tds.zip
+
+`CTAN:' means one of the `Comprehensive TeX Archive Network'
+nodes or one of its mirrors.  This is explained in
+  http://www.tex.ac.uk/cgi-bin/texfaq2html?label=archives
+
+The CTAN stuff will be mirrored automatically from the
+ftp server, so
+  ftp://ftp.tug.org/pub/tex/muench/pagesLTS/
+corresponds to
+  CTAN:macros/latex/contrib/muench/pagesLTS/
+
+
+3 INSTALLATION
+==============
+
+Installation with ZIP file in TDS format
+----------------------------------------
+The ZIP file `pagesLTS.tds.zip' contains the files sorted
+in a TDS tree. Thus you can directly unpack the ZIP file
+inside a TDS tree.
+ (See CTAN:tds.zip for an explanation of TDS.)
+Example:
+  cd /...somewhere.../texmf
+  unzip /...downloadpath.../pagesLTS.tds.zip
+Do not forget to refresh the file name database of this
+TDS tree.
+Example:
+  texhash /...somewhere.../texmf
+
+Manual installation
+-------------------
+a) Download the pagesLTS files from CTAN or the TUG server.
+   If necessary, unpack them.
+b) If directory `beta' exists, replace the files by the
+   counterparts in this directory, if you want to use the
+   latest versions.
+c) Generate the package and driver files:
+     tex pagesLTS.ins
+d) Install the files `*.sty' and `*.cfg' in your TDS tree:
+     cp *.sty *.cfg TDS:tex/latex/muench/pagesLTS/
+   Replace `TDS:' by the prefix of your TDS tree
+   (texmf directory).
+e) Copy the documentation files to
+   "TDS:doc/latex/pagesLTS/":
+   README, pagesLTS.pdf,pagesLTS-example.tex,
+   pagesLTS-example.pdf.
+f) Update the databases if necessary, e. g. for teTeX:
+     mktexlsr .../texmf
+
+
+4 ADDITIONAL PACKAGES
+=====================
+
+Depending on the driver and option settings, pagesLTS loads
+other packages:
+
+For unpacking the pagesLTS.dtx file and constructing the
+documentation it is required:
+- TeXFormat LaTeX2e, 1994/06/01, v2e
+- document class ltxdoc, 2007/11/11, v2.0u,
+    CTAN:macros/latex/base/ltxdoc.dtx
+- package holtxdoc, 2010/04/24, v0.19,
+    CTAN:macros/latex/contrib/oberdiek/holtxdoc.dtx
+- package hypdoc, 2010/03/26, v1.9,
+    CTAN:macros/latex/contrib/oberdiek/hypdoc.dtx
+- package geometry, 2010/03/13, v5.3,
+    CTAN:macros/latex/contrib/geometry/geometry.dtx
+
+The pagesLTS.sty for LATEX2e (i. e. all documents using the
+ pagesLTS package) requires:
+- TeXFormat LaTeX2e, 1994/06/01, v2e
+- package atveryend, 2010/03/24, v1.5,
+    CTAN:macros/latex/contrib/oberdiek/atveryend.dtx
+- package everyshi, 2001/05/15, v3.00,
+    CTAN:macros/latex/contrib/ms/everyshi.dtx
+- package kvoptions, 2010/02/22, v3.7,
+    CTAN:macros/latex/contrib/oberdiek/kvoptions.dtx
+- package undolabl, 2010/06/03, v1.0b,
+    CTAN:macros/latex/contrib/muench/undolabl/undolabl.dtx
+    (submitted, should become available at that location
+     soon)
+
+The pagesLTS-example.tex requires the same files as all
+ documents using the pagesLTS package, and additionally:
+- package alphalph, 2010/04/18, v2.3,
+    CTAN:macros/latex/generic/oberdiek/alphalph.dtx
+- package lipsum, 2005/01/26, v1.0,
+    CTAN:macros/latex/contrib/lipsum/lipsum.dtx
+- package showkeys, 2007/08/07, v3.15,
+    CTAN:macros/latex/required/tools/showkeys.dtx
+- package hyperref, 2010/05/13, v6.81e,
+    CTAN:macros/latex/contrib/hyperref.zip
+- package pagesLTS, 2010/06/03, v1.1b,
+    CTAN:macros/latex/contrib/muench/pagesLTS/pagesLTS.dtx
+    (submitted, should become available at that location
+     soon)
+    (Well, it is the example file for this package, and
+     because you are reading the README for the pagesLTS
+     package, it can be assumed that you already have some
+     version of it - is it the current one?)
+
+which again load other packages
+(see the result of the \listfiles comman in the log-file
+ of the example).
+
+
+5 PACKAGE COMPATIBILITY
+=======================
+
+* endfloat package
+  pagesLTS is not compatible with very old versions of
+  endfloat(2.0 and older).
+  Just get the recent version of the endfloat package.
+
+* lastpage package
+  \usepackage[pagecontinue=false,alphMult=0,AlphMulti=0,
+   fnsymbolmult=false,romanMult=false,RomanMulti=false]
+   {pagesLTS}
+  can simulate the behaviour of the lastpage package.
+  Using the lastpage before the pagesLTS before the hyperref
+  package results in multiply definitions of the LastPage
+  label.
+
+
+6 AUTHOR/MAINTAINER
+=====================
+
+* Hans-Martin Münch
+
+
+7 BUG REPORTS
+==============
+
+A bug report should contain:
+* Comprehensive problem description. This includes error or
+  warning messages.
+  * \errorcontextlines=\maxdimen can be added in the
+    TeX code to get more informations in TeX error messages.
+* Minimal test file that shows the problem, but does not
+  contain any unnecessary packages and code.
+* Used drivers/programs.
+* Version information about used packages and programs.
+  * If you are using LaTeX, then add "\listfiles". Then
+    a list of version informations is printed at the end
+    of the LaTeX run.
+* Please no other files than the minimal test file.
+  The other files .log, .dvi, .ps, .pdf are seldom
+  necessary, so send them only on request.
+* Please .zip or .tar.gz your file(s) before sending them!
+
+Bug address
+-----------
+Bug reports can be send to the maintainer:
+  Hans-Martin Münch
+  <Martin [dot] Muench [at] Uni-Bonn [dot] de>
+
+
+8 KNOWN PROBLEMS
+=================
+
+* as yet: none...
\ No newline at end of file
diff --git a/Master/texmf-dist/doc/latex/pageslts/ltxdoc.cfg b/Master/texmf-dist/doc/latex/pageslts/ltxdoc.cfg
new file mode 100644
index 00000000000..480d7dcd308
--- /dev/null
+++ b/Master/texmf-dist/doc/latex/pageslts/ltxdoc.cfg
@@ -0,0 +1,121 @@
+%%
+%% This is file `ltxdoc.cfg',
+%% generated with the docstrip utility.
+%%
+%% The original source files were:
+%%
+%% pagesLTS.dtx  (with options: `ltxdoc')
+%% 
+%% This is a generated file.
+%% 
+%% IMPORTANT NOTICE:
+%% On the first page backslash pagenumbering should be called
+%% (with the appropriate argument out of e.g.
+%%  * roman - Lowercase Roman numerals: i, ii, iii, iv,...
+%%  * Roman - Uppercase Roman numerals: I, II, III, IV,...
+%%  * arabic - Arabic numerals: 1, 2, 3, 4,...
+%%  * alph - Lowercase letters: a, b, c, d,...
+%%  * Alph - Uppercase letters: A, B, C, D,...
+%%  * fnsymbol - Footnote symbols: *, † (ddagger), ‡ (dddagger),
+%%                                 § (mathsection),...
+%% ). The command backslash pagenumbering is renewed, but no change
+%% should be visible to the output text, because only labels are added.
+%% backslash OrigPagenumbering can be used to get the original meaning
+%% of backslash pagenumbering, but in that case this package does not
+%% see the change in the page numbering scheme and will make mistakes.
+%% The package takes options.
+%% 
+%% The usual disclaimers apply:
+%% If it doesn't work right that's your problem.
+%% (Nevertheless, send an e-mail to the maintainer
+%%  when you find an error in this package.)
+%% 
+%% This work may be distributed and/or modified under the
+%% conditions of the LaTeX Project Public License, either
+%% version 1.3c of this license or (at your option) any later
+%% version. This version of this license is in
+%%    http://www.latex-project.org/lppl/lppl-1-3c.txt
+%% and the latest version of this license is in
+%%    http://www.latex-project.org/lppl.txt
+%% and version 1.3c or later is part of all distributions of
+%% LaTeX version 2005/12/01 or later.
+%% 
+%% This work has the LPPL maintenance status "maintained".
+%% 
+%% The Current Maintainer of this work is H.-Martin Muench
+%% (Martin dot Muench at Uni-Bonn dot de).
+%% 
+%% This package first started as a revision of the lastpage
+%% package of Jeffrey P. Goldberg (jeffrey+news at goldmark dot org),
+%% but it became obviouse that a replacement was needed.
+%% 
+%% This work consists of the main source file pagesLTS.dtx
+%% and the derived files
+%%    pagesLTS.sty, pagesLTS.pdf, pagesLTS.ins, pagesLTS.drv,
+%%    pagesLTS-example.tex.
+%% 
+\NeedsTeXFormat{LaTeX2e}[1994/06/01]
+\ProvidesFile{ltxdoc.cfg}[2010/05/15 v1.0 configuration file for pagesLTS (HMM)]
+  %% Code from original ltxdoc.cfg [2007/01/08 latex-tds: ltxdoc.cls configuration (HO)],  %%
+  % copyrighted 2006, 2007 Heiko Oberdiek, part of project `latex-tds'.
+  % That file may be distributed and/or modified under the
+  % conditions of the LaTeX Project Public License, either version 1.3
+  % of this license or (at your option) any later version.
+  % The latest version of this license is in
+  %   http://www.latex-project.org/lppl.txt
+  % and version 1.3c or later is part of all distributions of LaTeX
+  % version 2005/12/01 or later.
+  % That work has the LPPL maintenance status `maintained'.
+  % The Current Maintainer of that work is Heiko Oberdiek.
+  %
+  \PassOptionsToClass{a4paper}{article}
+  \AtEndOfClass{%
+    \RequirePackage[numbered]{hypdoc}[2010/03/26]% v1.9
+    \pdfstringdefDisableCommands{%
+      \let\env\relax % longtable.dtx
+      \let\mytt\relax % tabularx.dtx
+    }%
+    \addtolength{\topmargin}{-10mm}%
+    \addtolength{\textheight}{20mm}%
+    % Depending on the page style, the head or foot area
+    % are put into the text area.
+    % Usually the page style is the default "plain".
+    % tools/verbatim.dtx uses "myheadings".
+    \def\string@plain{plain}%
+    \def\string@myheadings{myheadings}%
+    \def\current@pagestyle{plain}%
+    \let\ltxdoc@cfg@pagestyle\pagestyle
+    \def\pagestyle#1{%
+      \def\current@pagestyle{#1}%
+      \ltxdoc@cfg@pagestyle{#1}%
+    }%
+    \edef\ltxdoc@cfg@jobname{\jobname}%
+    \def\ltxdoc@cfg@longtable{longtable}%
+    \@onelevel@sanitize\ltxdoc@cfg@longtable
+    \ifx\ltxdoc@cfg@jobname\ltxdoc@cfg@longtable
+      \def\current@pagestyle{both}%
+    \fi
+    \let\ltxdoc@cfg@document\document
+    \def\document{%
+      \ifx\current@pagestyle\string@plain
+        \addtolength{\textheight}{\headheight}%
+        \addtolength{\textheight}{\headsep}%
+        \setlength{\headheight}{0pt}%
+        \setlength{\headsep}{0pt}%
+        \global\textheight\textheight
+        \global\headheight\headheight
+        \global\headsep\headsep
+      \fi
+      \ifx\current@pagestyle\string@myheadings
+        \addtolength{\textheight}{\footskip}%
+        \global\textheight\textheight
+      \fi
+      \ltxdoc@cfg@document
+    }%
+  %% End of code from original ltxdoc.cfg [2007/01/08 latex-tds: ltxdoc.cls configuration (HO)]  %%
+  %% Place additional code here.  %%
+  }
+
+\endinput
+%%
+%% End of file `ltxdoc.cfg'.
diff --git a/Master/texmf-dist/doc/latex/pageslts/pagesLTS-example.pdf b/Master/texmf-dist/doc/latex/pageslts/pagesLTS-example.pdf
new file mode 100644
index 00000000000..c86908aa5a3
--- /dev/null
+++ b/Master/texmf-dist/doc/latex/pageslts/pagesLTS-example.pdf
diff --git a/Master/texmf-dist/doc/latex/pageslts/pagesLTS-example.tex b/Master/texmf-dist/doc/latex/pageslts/pagesLTS-example.tex
new file mode 100644
index 00000000000..ab5135b55da
--- /dev/null
+++ b/Master/texmf-dist/doc/latex/pageslts/pagesLTS-example.tex
@@ -0,0 +1,991 @@
+%%
+%% This is file `pagesLTS-example.tex',
+%% generated with the docstrip utility.
+%%
+%% The original source files were:
+%%
+%% pagesLTS.dtx  (with options: `example')
+%% 
+%% This is a generated file.
+%% 
+%% IMPORTANT NOTICE:
+%% On the first page backslash pagenumbering should be called
+%% (with the appropriate argument out of e.g.
+%%  * roman - Lowercase Roman numerals: i, ii, iii, iv,...
+%%  * Roman - Uppercase Roman numerals: I, II, III, IV,...
+%%  * arabic - Arabic numerals: 1, 2, 3, 4,...
+%%  * alph - Lowercase letters: a, b, c, d,...
+%%  * Alph - Uppercase letters: A, B, C, D,...
+%%  * fnsymbol - Footnote symbols: *, † (ddagger), ‡ (dddagger),
+%%                                 § (mathsection),...
+%% ). The command backslash pagenumbering is renewed, but no change
+%% should be visible to the output text, because only labels are added.
+%% backslash OrigPagenumbering can be used to get the original meaning
+%% of backslash pagenumbering, but in that case this package does not
+%% see the change in the page numbering scheme and will make mistakes.
+%% The package takes options.
+%% 
+%% The usual disclaimers apply:
+%% If it doesn't work right that's your problem.
+%% (Nevertheless, send an e-mail to the maintainer
+%%  when you find an error in this package.)
+%% 
+%% This work may be distributed and/or modified under the
+%% conditions of the LaTeX Project Public License, either
+%% version 1.3c of this license or (at your option) any later
+%% version. This version of this license is in
+%%    http://www.latex-project.org/lppl/lppl-1-3c.txt
+%% and the latest version of this license is in
+%%    http://www.latex-project.org/lppl.txt
+%% and version 1.3c or later is part of all distributions of
+%% LaTeX version 2005/12/01 or later.
+%% 
+%% This work has the LPPL maintenance status "maintained".
+%% 
+%% The Current Maintainer of this work is H.-Martin Muench
+%% (Martin dot Muench at Uni-Bonn dot de).
+%% 
+%% This package first started as a revision of the lastpage
+%% package of Jeffrey P. Goldberg (jeffrey+news at goldmark dot org),
+%% but it became obviouse that a replacement was needed.
+%% 
+%% This work consists of the main source file pagesLTS.dtx
+%% and the derived files
+%%    pagesLTS.sty, pagesLTS.pdf, pagesLTS.ins, pagesLTS.drv,
+%%    pagesLTS-example.tex.
+%% 
+\documentclass[british]{article}
+%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%
+\usepackage{alphalph}[2010/04/18]% v2.3
+\usepackage{lipsum}[2005/01/26]% v1.0
+\usepackage[draft]{showkeys}[2007/08/07]% v3.15
+%%      Use final instead of draft to hide the keys. %%
+\usepackage{hyperref}[2010/05/13]% v6.81e
+\hypersetup{%
+ extension=pdf,%
+ plainpages=false,%
+ pdfpagelabels=true,%
+ hyperindex=false,%
+ pdflang={en},%
+ pdftitle={pagesLTS package example},%
+ pdfauthor={Hans-Martin Muench},%
+ pdfsubject={Example for the pagesLTS package},%
+ pdfkeywords={LaTeX, pagesLTS, Hans-Martin Muench},%
+ pdfview=Fit,%
+ pdfstartview=Fit,%
+ pdfpagelayout=SinglePage,%
+ bookmarksopen=true%
+}
+\usepackage[pagecontinue=true,alphMult=ab,AlphMulti=AB,fnsymbolmult=true,romanMult=true,RomanMulti=true]{pagesLTS}[2010/06/03]% v1.1b
+%% These are the default options. %%
+\makeatletter
+  \renewcommand{\@evenfoot}%
+   {Page \thepage\ (\theCurrentPage; local: \theCurrentPageLocal) of %
+    \lastpageref{pagesLTS.roman}(\lastpageref{pagesLTS.roman.local}) + %
+    \lastpageref{pagesLTS.Roman}(\lastpageref{pagesLTS.Roman.local}) + %
+    \lastpageref{pagesLTS.arabic}(\lastpageref{pagesLTS.arabic.local}) + %
+    \lastpageref{pagesLTS.fnsymbol}(\lastpageref{pagesLTS.fnsymbol.local}) + %
+    \lastpageref{pagesLTS.alph}(\lastpageref{pagesLTS.alph.local}) + %
+    \lastpageref{pagesLTS.Alph}(\lastpageref{pagesLTS.Alph.local}) = %
+    \lastpageref{LastPages} pages.%
+   }
+  \renewcommand{\@oddfoot}{\@evenfoot}
+  \newcounter{pagesLTS.exampleArabic}
+  \setcounter{pagesLTS.exampleArabic}{3}
+  \newcounter{pagesLTS.examplealph}
+  \setcounter{pagesLTS.examplealph}{23}
+%% Code from tcilatex.tex, Macros for Scientific Word and Scientific WorkPlace 5.5 <06 Oct 2005> %%
+%% Copyright (C) 2005 Mackichan Software, Inc.                                                   %%
+%% That macro file is NOT proprietary and may be freely copied and distributed.                  %%
+  \def\unit#1{\mathord{\thinspace\rm #1}}%
+%% End of code from tcilatex.tex                                                                 %%
+\makeatother
+\listfiles
+\begin{document}
+\pagenumbering{roman}
+%% Note the first \pagenumbering immediately behind \begin{document}. %%
+
+%%\addtocounter{page}{-2} %%
+
+\section*{Example for pagesLTS}
+\addcontentsline{toc}{section}{Example for pagesLTS}
+\markboth{Example for pagesLTS}{Example for pagesLTS}
+
+This example demonstrates the most common uses of package\\
+\textsf{pagesLTS}, v1.1b as of 2010/06/03 (HMM).\\
+The used options were \texttt{pagecontinue=true},
+\texttt{alphMult=ab}, \texttt{AlphMulti=AB}, \linebreak
+\texttt{fnsymbolmult=true},
+\texttt{romanMult=true}, and \texttt{RomanMulti=true}
+(the default ones).\\
+For more details please see the documentation!\\
+
+\label{keys} To hide the \pageref{keys}{\qquad } use option
+\texttt{final} instead of \texttt{draft} with the \textsf{showkeys}
+package (or remove the package call from the preamble of
+this document).\\
+
+\textbf{Trademarks} appear throughout this example without any
+trademark symbol; they are the property of their respective
+trademark owner. There is no intention of infringement; the
+usage is to the benefit of the trademark owner.\\
+
+\textbf{Tip}: Use \textit{logical page numbers} for
+the display of the pdf!\\
+(In Adobe Reader 9.3.1: \underline{E}dit $>$
+Prefere\underline{n}ces (Ctrl+k) $>$ Page Display $>$
+Page Content and Information $>$ Use logical page
+\nolinebreak{\underline{n}umbers.)}\\
+
+You want negative page numbers? Not only arabic, but even roman,
+Roman, alph, Alph or fnsymbol ones? No problem, e.\,g. just give a\\
+\texttt{\textbackslash addtocounter\{page\}\{- \textit{some number}\}}
+in the source code of this example file (or uncomment the prepared
+line)!
+
+\bigskip
+
+Save per page about $200\unit{ml}$ water, $2\unit{g}$ CO$_{2}$
+and $2\unit{g}$ wood:\\
+Therefore please print only if this is really necessary.
+
+\newpage
+
+\tableofcontents
+
+\newpage
+
+\pagenumbering{roman}
+ % in case the page numbering is changed before,
+ % otherwise pagesLTS.current.local.roman on this page
+ % would be undefined
+
+\section{roman}
+
+\noindent (\texttt{roman} page numbering was started before,
+becaue the page numbering scheme was needed to start at
+the first page, of course.)\\
+
+\noindent First page (\texttt{\textbackslash lastpageref\{pagesLTS.0\}}):
+\lastpageref{pagesLTS.0}\\
+
+\noindent The page (\texttt{\textbackslash thepage}): \thepage \\
+
+\noindent Current page (\texttt{\textbackslash theCurrentPage}),
+i.\,e. counted continuously from the first page): \theCurrentPage \\
+You can get this also in other formats:
+\roman{CurrentPage}, \Roman{CurrentPage}, \arabic{CurrentPage},
+\fnsymbol{CurrentPage}, \alph{CurrentPage}, \Alph{CurrentPage}.
+
+\noindent CurrentPageLocal (\texttt{\textbackslash theCurrentPageLocal}),
+i.\,e. counted continuously from the first page of the
+current page numbering sheme): \theCurrentPageLocal \\
+You can get also this in other formats, too:
+\roman{pagesLTS.current.local.roman}, \Roman{pagesLTS.current.local.roman},
+\arabic{pagesLTS.current.local.roman}, \fnsymbol{pagesLTS.current.local.roman},
+\alph{pagesLTS.current.local.roman}, \Alph{pagesLTS.current.local.roman},
+but probably it only makes sense if page numbering scheme and format are
+the same, e.\,g.\\
+\texttt{\textbackslash Roman\{pagesLTS.current.local.Roman\}}\\
+or \texttt{\textbackslash Alph\{pagesLTS.current.local.Alph\}}.\ %
+\texttt{\textbackslash arabic\{\ldots \}}\ could make sense
+even if combined with another page numbering scheme.
+And this is exactly what \texttt{\textbackslash theCurrentPageLocal} does:\\
+\nolinebreak{\texttt{\textbackslash def\textbackslash theCurrentPageLocal%
+\{\textbackslash arabic\{pagesLTS.current.local.\textbackslash pagesLTS@pnc\}\}}.}\\
+
+\noindent Last roman page (pagesLTS.roman): \lastpageref{pagesLTS.roman}{\hskip4em }
+(There are \lastpageref{pagesLTS.roman.local} pages with roman numbers.)\\
+
+\noindent Last Roman page (pagesLTS.Roman): \lastpageref{pagesLTS.Roman}{\hskip3em }
+(There are \lastpageref{pagesLTS.Roman.local}~pages with Roman numbers:\\
+\lastpages{Roman}{1}~pages in the first Roman sector
+(\pageref{Roman}{\hskip3em }-\lastpageref{pagesLTS.Roman.1}{\hskip3em }),\\
+\lastpages{Roman}{2}~pages in the second Roman sector
+(\pageref{Roman2}{\hskip3em }-\lastpageref{pagesLTS.Roman.2}{\hskip3em }), and\\
+\lastpages{Roman}{3}~pages in the third Roman sector
+(\pageref{Roman3}{\hskip3em }-\lastpageref{pagesLTS.Roman.3}{\hskip3em }).\\
+
+When the option \texttt{pagecontinue=false} is used with the
+\textsf{pagesLTS} package, the
+\texttt{\textbackslash lastpageref\{pagesLTS.Roman\}} will point
+to the same page as before, but this will have a lower number.\\
+The \texttt{\textbackslash lastpageref\{pagesLTS.Roman.local\}}
+will not change, because the number of pages does not change
+(only the page numbers).\\
+
+\noindent Last arabic page (pagesLTS.arabic): \lastpageref{pagesLTS.arabic}{\hskip5em }
+(There are only \lastpageref{pagesLTS.arabic.local} pages with arabic numbers,
+because an \texttt{\textbackslash addtocounter\{page\}\{\arabic{pagesLTS.exampleArabic}\}} was used.)\\
+
+\noindent Last fnsymbol page (pagesLTS.fnsymbol): \lastpageref{pagesLTS.fnsymbol} \\
+(\texttt{\textbackslash lastpageref\{pagesLTS.fnsymbol\}} -- never
+\texttt{\textbackslash pageref\{pagesLTS.fnsymbol\}}!)\\
+(There are \lastpageref{pagesLTS.fnsymbol.local} pages with fnsymbol numbers.)\\
+
+\noindent Last alph page (pagesLTS.alph): \lastpageref{pagesLTS.alph}{\hskip4em }
+(There are only \lastpageref{pagesLTS.alph.local} pages with alph numbers,
+because an \texttt{\textbackslash addtocounter\{page\}\{\arabic{pagesLTS.examplealph}\}} was used.)\\
+
+\noindent Last Alph page (pagesLTS.Alph): \lastpageref{pagesLTS.Alph}{\hskip4em }
+(There are \lastpageref{pagesLTS.Alph.local} pages with Alph numbers.)\\
+
+\noindent Last page's \textit{name} (LastPage): \lastpageref{LastPage}\\
+
+\noindent Very last page's \textit{name} (VeryLastPage): \lastpageref{VeryLastPage}\\
+(\texttt{lastpage} and \texttt{VeryLastPage} are identical, unless
+a package with output \linebreak
+\texttt{\textbackslash AtEndDocument} after the \textsf{pagesLTS} package
+was added.)\\
+
+\noindent Last page's \textit{number} (LastPages): \lastpageref{LastPages}{\hskip3em }
+(=~total number of pages)\\
+
+\lipsum[1-3]
+
+\newpage
+
+\pagenumbering{Roman}
+
+\section{Roman\label{Roman}}
+\subsection{Common Roman page numbering}
+
+\noindent First page (\texttt{\textbackslash lastpageref\{pagesLTS.0\}}):
+\lastpageref{pagesLTS.0}\\
+
+\noindent The page (\texttt{\textbackslash thepage}): \thepage \\
+
+\noindent Current page (\texttt{\textbackslash theCurrentPage}),
+i.\,e. counted continuously from the first page): \theCurrentPage \\
+
+\noindent CurrentPageLocal (\texttt{\textbackslash theCurrentPageLocal}),
+i.\,e. counted continuously from the first page of the
+current page numbering sheme): \theCurrentPageLocal \\
+
+\noindent Last roman page (pagesLTS.roman): \lastpageref{pagesLTS.roman}{\hskip4em }
+(There are \lastpageref{pagesLTS.roman.local} pages with roman numbers.)\\
+
+\noindent Last Roman page (pagesLTS.Roman): \lastpageref{pagesLTS.Roman}{\hskip3em }
+(There are \lastpageref{pagesLTS.Roman.local}~pages with Roman numbers:\\
+\lastpages{Roman}{1}~pages in the first Roman sector
+(\pageref{Roman}{\hskip3em }-\lastpageref{pagesLTS.Roman.1}{\hskip3em }),\\
+\lastpages{Roman}{2}~pages in the second Roman sector
+(\pageref{Roman2}{\hskip3em }-\lastpageref{pagesLTS.Roman.2}{\hskip3em }), and\\
+\lastpages{Roman}{3}~pages in the third Roman sector
+(\pageref{Roman3}{\hskip3em }-\lastpageref{pagesLTS.Roman.3}{\hskip3em }).\\
+
+\noindent Last arabic page (pagesLTS.arabic): \lastpageref{pagesLTS.arabic}{\hskip5em }
+(There are only \lastpageref{pagesLTS.arabic.local} pages with arabic numbers,
+because an \texttt{\textbackslash addtocounter\{page\}\{\arabic{pagesLTS.exampleArabic}\}} was used.)\\
+
+\noindent Last fnsymbol page (pagesLTS.fnsymbol): \lastpageref{pagesLTS.fnsymbol} \\
+(\texttt{\textbackslash lastpageref\{pagesLTS.fnsymbol\}} -- never
+\texttt{\textbackslash pageref\{pagesLTS.fnsymbol\}}!)\\
+(There are \lastpageref{pagesLTS.fnsymbol.local} pages with fnsymbol numbers.)\\
+
+\noindent Last alph page (pagesLTS.alph): \lastpageref{pagesLTS.alph}{\hskip4em }
+(There are only \lastpageref{pagesLTS.alph.local} pages with alph numbers,
+because an \texttt{\textbackslash addtocounter\{page\}\{\arabic{pagesLTS.examplealph}\}} was used.)\\
+
+\noindent Last Alph page (pagesLTS.Alph): \lastpageref{pagesLTS.Alph}{\hskip4em }
+(There are \lastpageref{pagesLTS.Alph.local} pages with Alph numbers.)\\
+
+\noindent Last page's \textit{name} (LastPage): \lastpageref{LastPage}\\
+
+\noindent Very last page's \textit{name} (VeryLastPage): \lastpageref{VeryLastPage}\\
+(\texttt{LastPage} and \texttt{VeryLastPage} are identical, unless
+a package with output \linebreak
+\texttt{\textbackslash AtEndDocument} after the \textsf{pagesLTS} package
+was added.)\\
+
+\noindent Last page's \textit{number} (LastPages): \lastpageref{LastPages}{\hskip3em }
+(=~total number of pages)\\
+
+\lipsum[1-4]
+
+\newpage
+
+\subsection{Last page of first Roman sector}
+\texttt{\textbackslash lastpageref\{pagesLTS.Roman\}} does \textbf{not}
+refer to this page (but there: \lastpageref{pagesLTS.Roman}),
+because the option \texttt{pagecontinue=true}
+was chosen. When a reference to this page is wanted,\\
+\texttt{\textbackslash lastpageref\{pagesLTS.Roman.1\}}
+can be used: \lastpageref{pagesLTS.Roman.1}.\\
+
+\bigskip
+There are \lastpages{Roman}{1}~pages
+(\texttt{\textbackslash lastpages\{Roman\}\{1\}})
+in this first Roman sector.\\
+The Roman page numbering scheme is continued later in
+section~\ref{Roman2})!
+
+\newpage
+
+\pagenumbering{arabic}
+
+\section{arabic}
+
+\subsection{Standard page numbering}
+
+\noindent First page (\texttt{\textbackslash lastpageref\{pagesLTS.0\}}):
+\lastpageref{pagesLTS.0}\\
+
+\noindent The page (\texttt{\textbackslash thepage}): \thepage \\
+
+\noindent Current page (\texttt{\textbackslash theCurrentPage}),
+i.\,e. counted continuously from the first page): \theCurrentPage \\
+
+\noindent CurrentPageLocal (\texttt{\textbackslash theCurrentPageLocal}),
+i.\,e. counted continuously from the first page of the
+current page numbering sheme): \theCurrentPageLocal \\
+
+\noindent Last roman page (pagesLTS.roman): \lastpageref{pagesLTS.roman}{\hskip4em }
+(There are \lastpageref{pagesLTS.roman.local} pages with roman numbers.)\\
+
+\noindent Last Roman page (pagesLTS.Roman): \lastpageref{pagesLTS.Roman}{\hskip3em }
+(There are \lastpageref{pagesLTS.Roman.local}~pages with Roman numbers:\\
+\lastpages{Roman}{1}~pages in the first Roman sector
+(\pageref{Roman}{\hskip3em }-\lastpageref{pagesLTS.Roman.1}{\hskip3em }),\\
+\lastpages{Roman}{2}~pages in the second Roman sector
+(\pageref{Roman2}{\hskip3em }-\lastpageref{pagesLTS.Roman.2}{\hskip3em }), and\\
+\lastpages{Roman}{3}~pages in the third Roman sector
+(\pageref{Roman3}{\hskip3em }-\lastpageref{pagesLTS.Roman.3}{\hskip3em }).\\
+
+\noindent Last arabic page (pagesLTS.arabic): \lastpageref{pagesLTS.arabic}{\hskip5em }
+(There are only \lastpageref{pagesLTS.arabic.local} pages with arabic numbers,
+because an \texttt{\textbackslash addtocounter\{page\}\{\arabic{pagesLTS.exampleArabic}\}} was used.)\\
+
+\noindent Last fnsymbol page (pagesLTS.fnsymbol): \lastpageref{pagesLTS.fnsymbol} \\
+(\texttt{\textbackslash lastpageref\{pagesLTS.fnsymbol\}} -- never
+\texttt{\textbackslash pageref\{pagesLTS.fnsymbol\}}!)\\
+(There are \lastpageref{pagesLTS.fnsymbol.local} pages with fnsymbol numbers.)\\
+
+\noindent Last alph page (pagesLTS.alph): \lastpageref{pagesLTS.alph}{\hskip4em }
+(There are only \lastpageref{pagesLTS.alph.local} pages with alph numbers,
+because an \texttt{\textbackslash addtocounter\{page\}\{\arabic{pagesLTS.examplealph}\}} was used.)\\
+
+\noindent Last Alph page (pagesLTS.Alph): \lastpageref{pagesLTS.Alph}{\hskip4em }
+(There are \lastpageref{pagesLTS.Alph.local} pages with Alph numbers.)\\
+
+\noindent Last page's \textit{name} (LastPage): \lastpageref{LastPage}\\
+
+\noindent Very last page's \textit{name} (VeryLastPage): \lastpageref{VeryLastPage}\\
+(\texttt{LastPage} and \texttt{VeryLastPage} are identical, unless
+a package with output \linebreak
+\texttt{\textbackslash AtEndDocument} after the \textsf{pagesLTS} package
+was added.)\\
+
+\noindent Last page's \textit{number} (LastPages): \lastpageref{LastPages}{\hskip3em }
+(=~total number of pages)\\
+
+\lipsum[1-4]
+\newpage
+
+\subsection[Empty page style]{Also an empty page style is no problem\ %
+for the current or total page count}
+
+\bigskip
+
+\thispagestyle{empty}
+
+\noindent First page (\texttt{\textbackslash lastpageref\{pagesLTS.0\}}):
+\lastpageref{pagesLTS.0}\\
+
+\noindent The page (\texttt{\textbackslash thepage}): \thepage \\
+
+\noindent Current page (\texttt{\textbackslash theCurrentPage}),
+i.\,e. counted continuously from the first page): \theCurrentPage \\
+
+\noindent CurrentPageLocal (\texttt{\textbackslash theCurrentPageLocal}),
+i.\,e. counted continuously from the first page of the
+current page numbering sheme): \theCurrentPageLocal \\
+
+\noindent Last roman page (pagesLTS.roman): \lastpageref{pagesLTS.roman}{\hskip4em }
+(There are \lastpageref{pagesLTS.roman.local} pages with roman numbers.)\\
+
+\noindent Last Roman page (pagesLTS.Roman): \lastpageref{pagesLTS.Roman}{\hskip3em }
+(There are \lastpageref{pagesLTS.Roman.local}~pages with Roman numbers:\\
+\lastpages{Roman}{1}~pages in the first Roman sector
+(\pageref{Roman}{\hskip3em }-\lastpageref{pagesLTS.Roman.1}{\hskip3em }),\\
+\lastpages{Roman}{2}~pages in the second Roman sector
+(\pageref{Roman2}{\hskip3em }-\lastpageref{pagesLTS.Roman.2}{\hskip3em }), and\\
+\lastpages{Roman}{3}~pages in the third Roman sector
+(\pageref{Roman3}{\hskip3em }-\lastpageref{pagesLTS.Roman.3}{\hskip3em }).\\
+
+\noindent Last arabic page (pagesLTS.arabic): \lastpageref{pagesLTS.arabic}{\hskip5em }
+(There are only \lastpageref{pagesLTS.arabic.local} pages with arabic numbers,
+because an \texttt{\textbackslash addtocounter\{page\}\{\arabic{pagesLTS.exampleArabic}\}} was used.)\\
+
+\noindent Last fnsymbol page (pagesLTS.fnsymbol): \lastpageref{pagesLTS.fnsymbol} \\
+(\texttt{\textbackslash lastpageref\{pagesLTS.fnsymbol\}} -- never
+\texttt{\textbackslash pageref\{pagesLTS.fnsymbol\}}!)\\
+(There are \lastpageref{pagesLTS.fnsymbol.local} pages with fnsymbol numbers.)\\
+
+\noindent Last alph page (pagesLTS.alph): \lastpageref{pagesLTS.alph}{\hskip4em }
+(There are only \lastpageref{pagesLTS.alph.local} pages with alph numbers,
+because an \texttt{\textbackslash addtocounter\{page\}\{\arabic{pagesLTS.examplealph}\}} was used.)\\
+
+\noindent Last Alph page (pagesLTS.Alph): \lastpageref{pagesLTS.Alph}{\hskip4em }
+(There are \lastpageref{pagesLTS.Alph.local} pages with Alph numbers.)\\
+
+\noindent Last page's \textit{name} (LastPage): \lastpageref{LastPage}\\
+
+\noindent Very last page's \textit{name} (VeryLastPage): \lastpageref{VeryLastPage}\\
+(\texttt{LastPage} and \texttt{VeryLastPage} are identical, unless
+a package with output \linebreak
+\texttt{\textbackslash AtEndDocument} after the \textsf{pagesLTS} package
+was added.)\\
+
+\noindent Last page's \textit{number} (LastPages): \lastpageref{LastPages}{\hskip3em }
+(=~total number of pages)\\
+
+\lipsum[1-4]
+
+\newpage
+
+\subsection[addtocounter, setcounter]{Neither\ %
+\texttt{\textbackslash addtocounter\{page\}} or\ %
+\texttt{\textbackslash setcounter\{page\}} is a problem for the\ %
+current or total page numbers}
+
+(Here is an \texttt{\textbackslash addtocounter\{page\}\{\arabic{pagesLTS.exampleArabic}\}}
+in the source code.)\\
+\addtocounter{page}{\value{pagesLTS.exampleArabic}}
+
+\noindent The page (from \texttt{\textbackslash thepage} command): \thepage \\
+
+\noindent Current page (from \texttt{\textbackslash theCurrentPage}\ %
+command), i.\,e. counted continuously from the first page): \theCurrentPage \\
+
+\noindent CurrentPageLocal (from \texttt{\textbackslash theCurrentPageLocal}\ %
+command), i.\,e. counted continuously from the first page of the
+current page numbering sheme): \theCurrentPageLocal\\
+
+\noindent Last page's number (LastPages): \lastpageref{LastPages}{\hskip3em }
+(= total number of pages)\\
+
+\lipsum[1-7]
+
+\newpage
+
+\pagenumbering{fnsymbol}
+
+\section{fnsymbol}
+
+Adobe Acrobat Reader 9.3.1 does not show the correct page names
+for all pages with \texttt{fnsymbol} page numbering scheme:
+
+\begin{tabular}{c|c|c|c}
+page number & page name         & shown by the Reader & \textsf{alphalph}                      \\ \hline
+$-1$ & \texttt{LaTeX Error}                &          & \ensuremath  {- *}                            \\
+ $0$ & (ignored by \LaTeX)                 &          & 0                                             \\
+ $1$ & \ensuremath  {*}                    & *        & \ensuremath  {*}                              \\
+ $2$ & \ensuremath  {\dagger }             &          & \ensuremath  {\dagger }                       \\
+ $3$ & \ensuremath  {\ddagger }            &          & \ensuremath  {\ddagger }                      \\
+ $4$ & \ensuremath  {\mathsection }        &          & \ensuremath  {\mathsection }                  \\
+ $5$ & \ensuremath  {\mathparagraph }      &          & \ensuremath  {\mathparagraph }                \\
+ $6$ & \ensuremath  {\delimiter "026B30D } & "026B30D & \ensuremath  {**}                             \\
+ $7$ & \ensuremath  {**}                   & **       & \ensuremath  {\dagger \dagger }               \\
+ $8$ & \ensuremath  {\dagger \dagger }     &          & \ensuremath  {\ddagger \ddagger }             \\
+ $9$ & \ensuremath  {\ddagger \ddagger }   &          & \ensuremath  {\mathsection \mathsection }     \\
+$10$ & \texttt{LaTeX Error}                &          & \ensuremath  {\mathparagraph \mathparagraph } \\
+$11$ & \texttt{LaTeX Error}                &          & \ensuremath  {***}                            \\
+$12$ & \texttt{LaTeX Error}                &          & \ensuremath  {\dagger \dagger \dagger }       \\
+\end{tabular}
+
+\noindent and so on, while at least the (\ldots\ of \ldots ) part
+of the page number is displayed correctly.\\
+
+\bigskip
+
+Without option \texttt{fnsymbolmult=true} of the \textsf{pagesLTS} package
+(and the help of Heiko Oberdiek's \textsf{alphalph} package),
+after page~9
+(\textquotedblleft \ensuremath {\ddagger \ddagger }\textquotedblright )
+(and also for negative page numbers) there would just appear a
+\begin{quote}
+\begin{verbatim}
+LaTeX Error: Counter too large
+See the LaTeX manual or LaTeX Companion for explanation.
+You've lost some text.  Try typing  <return>  to proceed.
+If that doesn't work, type  X <return>  to quit.
+\end{verbatim}
+\end{quote}
+Now the page numbers after 5 (\ensuremath  {\mathparagraph }) are
+continued  with the doubled \textquotedblleft number\textquotedblright\ of
+the first, second, third,\ldots\ page (\ensuremath  {**},
+\ensuremath  {\dagger \dagger }, \ensuremath  {\ddagger \ddagger },
+\ensuremath  {\mathsection \mathsection },
+\ensuremath  {\mathparagraph \mathparagraph }),
+and after the tenth page the \textquotedblleft number\textquotedblright\ is
+tripled (\ensuremath  {***}, \ensuremath  {\dagger \dagger \dagger },\ldots).
+Page zero is named 0 and negative pages just named like the positive ones
+with addition of a minus sign~($-$).
+
+\bigskip
+
+\noindent First page (\texttt{\textbackslash lastpageref\{pagesLTS.0\}}):
+\lastpageref{pagesLTS.0}\\
+
+\noindent The page (\texttt{\textbackslash thepage}): \thepage \\
+
+\noindent Current page (\texttt{\textbackslash theCurrentPage}),
+i.\,e. counted continuously from the first page): \theCurrentPage \\
+
+\noindent CurrentPageLocal (\texttt{\textbackslash theCurrentPageLocal}),
+i.\,e. counted continuously from the first page of the
+current page numbering sheme): \theCurrentPageLocal \\
+
+\noindent Last roman page (pagesLTS.roman): \lastpageref{pagesLTS.roman}{\hskip4em }
+(There are \lastpageref{pagesLTS.roman.local} pages with roman numbers.)\\
+
+\noindent Last Roman page (pagesLTS.Roman): \lastpageref{pagesLTS.Roman}{\hskip3em }
+(There are \lastpageref{pagesLTS.Roman.local}~pages with Roman numbers:\\
+\lastpages{Roman}{1}~pages in the first Roman sector
+(\pageref{Roman}{\hskip3em }-\lastpageref{pagesLTS.Roman.1}{\hskip3em }),\\
+\lastpages{Roman}{2}~pages in the second Roman sector
+(\pageref{Roman2}{\hskip3em }-\lastpageref{pagesLTS.Roman.2}{\hskip3em }), and\\
+\lastpages{Roman}{3}~pages in the third Roman sector
+(\pageref{Roman3}{\hskip3em }-\lastpageref{pagesLTS.Roman.3}{\hskip3em }).\\
+
+\noindent Last arabic page (pagesLTS.arabic): \lastpageref{pagesLTS.arabic}{\hskip5em }
+(There are only \lastpageref{pagesLTS.arabic.local} pages with arabic numbers,
+because an \texttt{\textbackslash addtocounter\{page\}\{\arabic{pagesLTS.exampleArabic}\}} was used.)\\
+
+\noindent Last fnsymbol page (pagesLTS.fnsymbol): \lastpageref{pagesLTS.fnsymbol} \\
+(\texttt{\textbackslash lastpageref\{pagesLTS.fnsymbol\}} -- never
+\texttt{\textbackslash pageref\{pagesLTS.fnsymbol\}}!)\\
+(There are \lastpageref{pagesLTS.fnsymbol.local} pages with fnsymbol numbers.)\\
+
+\noindent Last alph page (pagesLTS.alph): \lastpageref{pagesLTS.alph}{\hskip4em }
+(There are only \lastpageref{pagesLTS.alph.local} pages with alph numbers,
+because an \texttt{\textbackslash addtocounter\{page\}\{\arabic{pagesLTS.examplealph}\}} was used.)\\
+
+\noindent Last Alph page (pagesLTS.Alph): \lastpageref{pagesLTS.Alph}{\hskip4em }
+(There are \lastpageref{pagesLTS.Alph.local} pages with Alph numbers.)\\
+
+\noindent Last page's \textit{name} (LastPage): \lastpageref{LastPage}\\
+
+\noindent Very last page's \textit{name} (VeryLastPage): \lastpageref{VeryLastPage}\\
+(\texttt{LastPage} and \texttt{VeryLastPage} are identical, unless
+a package with output \linebreak
+\texttt{\textbackslash AtEndDocument} after the \textsf{pagesLTS} package
+was added.)\\
+
+\noindent Last page's \textit{number} (LastPages): \lastpageref{LastPages}{\hskip3em }
+(=~total number of pages)\\
+
+\lipsum[1-60]
+
+\newpage
+
+\pagenumbering{Roman}
+
+\section{Roman - again!\label{Roman2}}
+
+The page number would start with
+\textquotedblleft I\textquotedblright\ again -- but
+for the \textsf{pagesLTS} package (with option \texttt{pagecontinue=true},
+or with option just \texttt{pagecontinue}, or even just
+\nolinebreak{with\textbf{out}} option \texttt{pagecontinue=false}).
+This package remembered the
+(\arabic{pagesLTS.double.Roman}-1)\footnote{OK, here\ %
+you have to compute this value for yourself, but\ %
+subtracting one should be managable for \TeX nicians.} pages already
+done in Roman output, and therefore continues with page
+\textquotedblleft \thepage \textquotedblright .\\
+If you want to start with \textquotedblleft I\textquotedblright\ all
+over again, you will have two pages with the same name,
+but nevertheless you can do this by using option \texttt{pagecontinue=false}
+or a \texttt{\textbackslash setcounter\{page\}\{1\}}\ here
+(not demonstrated in this example file).\\
+
+\noindent First page (\texttt{\textbackslash lastpageref\{pagesLTS.0\}}):
+ \lastpageref{pagesLTS.0}\\
+
+\noindent The page (\texttt{\textbackslash thepage}): \thepage \\
+
+\noindent Current page (\texttt{\textbackslash theCurrentPage}),
+i.\,e. counted continuously from the first page): \theCurrentPage \\
+
+\noindent CurrentPageLocal (\texttt{\textbackslash theCurrentPageLocal}),
+i.\,e. counted continuously from the first page of the
+current page numbering sheme): \theCurrentPageLocal \\
+
+\noindent Last roman page (pagesLTS.roman): \lastpageref{pagesLTS.roman}{\hskip4em }
+(There are \lastpageref{pagesLTS.roman.local} pages with roman numbers.)\\
+
+\noindent Last Roman page (pagesLTS.Roman): \lastpageref{pagesLTS.Roman}{\hskip3em }
+(There are \lastpageref{pagesLTS.Roman.local}~pages with Roman numbers:\\
+\lastpages{Roman}{1}~pages in the first Roman sector
+(\pageref{Roman}{\hskip3em }-\lastpageref{pagesLTS.Roman.1}{\hskip3em }),\\
+\lastpages{Roman}{2}~pages in the second Roman sector
+(\pageref{Roman2}{\hskip3em }-\lastpageref{pagesLTS.Roman.2}{\hskip3em }), and\\
+\lastpages{Roman}{3}~pages in the third Roman sector
+(\pageref{Roman3}{\hskip3em }-\lastpageref{pagesLTS.Roman.3}{\hskip3em }).\\
+
+\noindent Last arabic page (pagesLTS.arabic): \lastpageref{pagesLTS.arabic}{\hskip5em }
+(There are only \lastpageref{pagesLTS.arabic.local} pages with arabic numbers,
+because an \texttt{\textbackslash addtocounter\{page\}\{\arabic{pagesLTS.exampleArabic}\}} was used.)\\
+
+\noindent Last fnsymbol page (pagesLTS.fnsymbol): \lastpageref{pagesLTS.fnsymbol} \\
+(\texttt{\textbackslash lastpageref\{pagesLTS.fnsymbol\}} -- never
+\texttt{\textbackslash pageref\{pagesLTS.fnsymbol\}}!)\\
+(There are \lastpageref{pagesLTS.fnsymbol.local} pages with fnsymbol numbers.)\\
+
+\noindent Last alph page (pagesLTS.alph): \lastpageref{pagesLTS.alph}{\hskip4em }
+(There are only \lastpageref{pagesLTS.alph.local} pages with alph numbers,
+because an \texttt{\textbackslash addtocounter\{page\}\{\arabic{pagesLTS.examplealph}\}} was used.)\\
+
+\noindent Last Alph page (pagesLTS.Alph): \lastpageref{pagesLTS.Alph}{\hskip4em }
+(There are \lastpageref{pagesLTS.Alph.local} pages with Alph numbers.)\\
+
+\noindent Last page's \textit{name} (LastPage): \lastpageref{LastPage}\\
+
+\noindent Very last page's \textit{name} (VeryLastPage): \lastpageref{VeryLastPage}\\
+(\texttt{LastPage} and \texttt{VeryLastPage} are identical, unless
+a package with output \linebreak
+\texttt{\textbackslash AtEndDocument} after the \textsf{pagesLTS} package
+was added.)\\
+
+\noindent Last page's \textit{number} (LastPages): \lastpageref{LastPages}{\hskip3em }
+(=~total number of pages)\\
+
+\lipsum[1-6]
+
+\newpage
+
+\texttt{\textbackslash lastpageref\{pagesLTS.Roman\}} does \textbf{not}
+refer to this page (but there: \lastpageref{pagesLTS.Roman}),
+because the option \texttt{pagecontinue=true}
+was chosen. When a reference to this page is wanted,\\
+\texttt{\textbackslash lastpageref\{pagesLTS.Roman.2\}}
+can be used: \lastpageref{pagesLTS.Roman.2}.\\
+
+\bigskip
+There are \lastpages{Roman}{2}~pages
+(\texttt{\textbackslash lastpages\{Roman\}\{2\}})
+in this second Roman sector.\\
+The Roman page numbering scheme is continued later in
+section~\ref{Roman3})!
+
+\newpage
+
+\pagenumbering{alph}
+
+\section{alph\label{alph}}
+
+\noindent First page (\texttt{\textbackslash lastpageref\{pagesLTS.0\}}):
+ \lastpageref{pagesLTS.0}\\
+
+\noindent The page (\texttt{\textbackslash thepage}): \thepage \\
+
+\noindent Current page (\texttt{\textbackslash theCurrentPage}),
+i.\,e. counted continuously from the first page): \theCurrentPage \\
+
+\noindent CurrentPageLocal (\texttt{\textbackslash theCurrentPageLocal}),
+i.\,e. counted continuously from the first page of the
+current page numbering sheme): \theCurrentPageLocal \\
+
+\noindent Last roman page (pagesLTS.roman): \lastpageref{pagesLTS.roman}{\hskip4em }
+(There are \lastpageref{pagesLTS.roman.local} pages with roman numbers.)\\
+
+\noindent Last Roman page (pagesLTS.Roman): \lastpageref{pagesLTS.Roman}{\hskip3em }
+(There are \lastpageref{pagesLTS.Roman.local}~pages with Roman numbers:\\
+\lastpages{Roman}{1}~pages in the first Roman sector
+(\pageref{Roman}{\hskip3em }-\lastpageref{pagesLTS.Roman.1}{\hskip3em }),\\
+\lastpages{Roman}{2}~pages in the second Roman sector
+(\pageref{Roman2}{\hskip3em }-\lastpageref{pagesLTS.Roman.2}{\hskip3em }), and\\
+\lastpages{Roman}{3}~pages in the third Roman sector
+(\pageref{Roman3}{\hskip3em }-\lastpageref{pagesLTS.Roman.3}{\hskip3em }).\\
+
+\noindent Last arabic page (pagesLTS.arabic): \lastpageref{pagesLTS.arabic}{\hskip5em }
+(There are only \lastpageref{pagesLTS.arabic.local} pages with arabic numbers,
+because an \texttt{\textbackslash addtocounter\{page\}\{\arabic{pagesLTS.exampleArabic}\}} was used.)\\
+
+\noindent Last fnsymbol page (pagesLTS.fnsymbol): \lastpageref{pagesLTS.fnsymbol} \\
+(\texttt{\textbackslash lastpageref\{pagesLTS.fnsymbol\}} -- never
+\texttt{\textbackslash pageref\{pagesLTS.fnsymbol\}}!)\\
+(There are \lastpageref{pagesLTS.fnsymbol.local} pages with fnsymbol numbers.)\\
+
+\noindent Last alph page (pagesLTS.alph): \lastpageref{pagesLTS.alph}{\hskip4em }
+(There are only \lastpageref{pagesLTS.alph.local} pages with alph numbers,
+because an \texttt{\textbackslash addtocounter\{page\}\{\arabic{pagesLTS.examplealph}\}} was used.)\\
+
+\noindent Last Alph page (pagesLTS.Alph): \lastpageref{pagesLTS.Alph}{\hskip4em }
+(There are \lastpageref{pagesLTS.Alph.local} pages with Alph numbers.)\\
+
+\noindent Last page's \textit{name} (LastPage): \lastpageref{LastPage}\\
+
+\noindent Very last page's \textit{name} (VeryLastPage): \lastpageref{VeryLastPage}\\
+(\texttt{LastPage} and \texttt{VeryLastPage} are identical, unless
+a package with output \linebreak
+\texttt{\textbackslash AtEndDocument} after the \textsf{pagesLTS} package
+was added.)\\
+
+\noindent Last page's \textit{number} (LastPages): \lastpageref{LastPages}{\hskip3em }
+(=~total number of pages)\\
+
+\lipsum[1-4]
+
+\newpage
+
+Without option \texttt{alphMult=ab} of the \textsf{pagesLTS} (and the help of
+Heiko Oberdiek's \textsf{alphalph} package), after page
+\textquotedblleft z\textquotedblright\ there would just appear a
+\begin{quote}
+\begin{verbatim}
+LaTeX Error: Counter too large
+See the LaTeX manual or LaTeX Companion for explanation.
+You've lost some text.  Try typing  <return>  to proceed.
+If that doesn't work, type  X <return>  to quit.
+\end{verbatim}
+\end{quote}
+Now the page numbers are continued aa, ab, ac,\ldots\ (aa, bb, cc,\ldots\ is
+also possible, see the \textsf{pagesLTS} documentation).\\
+To demonstrate this, we add a\\
+\texttt{\textbackslash addtocounter\{page\}\{\arabic{pagesLTS.examplealph}\}}\\
+in the source code here.
+
+\addtocounter{page}{\arabic{pagesLTS.examplealph}}
+
+\bigskip
+
+\lipsum[1-18]
+
+\newpage
+
+\pagenumbering{Roman}
+
+\section{Roman - third time!\label{Roman3}}
+
+The page number would start with
+\textquotedblleft I\textquotedblright\ again -- but
+for the \textsf{pagesLTS} package (with option \texttt{pagecontinue=true},
+or with option just \texttt{pagecontinue}, or even just
+\nolinebreak{with\textbf{out}} option \texttt{pagecontinue=false}).
+This package remembered the
+(\arabic{pagesLTS.double.Roman}-1)\footnote{OK, here\ %
+you have to compute this value for yourself, but\ %
+subtracting one should be managable for \TeX nicians.} pages already
+done in Roman output, and therefore continues with page
+\textquotedblleft \thepage \textquotedblright .\\
+If you want to start with \textquotedblleft I\textquotedblright\ all
+over again, you will have (at least) two pages with the same name,
+but nevertheless you can do this by using option
+\texttt{pagecontinue=false} instead of \texttt{pagecontinue=true}
+(not demonstrated here).\\
+
+\noindent First page (\texttt{\textbackslash lastpageref\{pagesLTS.0\}}):
+ \lastpageref{pagesLTS.0}\\
+
+\noindent The page (\texttt{\textbackslash thepage}): \thepage \\
+
+\noindent Current page (\texttt{\textbackslash theCurrentPage}),
+i.\,e. counted continuously from the first page): \theCurrentPage \\
+
+\noindent CurrentPageLocal (\texttt{\textbackslash theCurrentPageLocal}),
+i.\,e. counted continuously from the first page of the
+current page numbering sheme): \theCurrentPageLocal \\
+
+\noindent Last roman page (pagesLTS.roman): \lastpageref{pagesLTS.roman}{\hskip4em }
+(There are \lastpageref{pagesLTS.roman.local} pages with roman numbers.)\\
+
+\noindent Last Roman page (pagesLTS.Roman): \lastpageref{pagesLTS.Roman}{\hskip3em }
+(There are \lastpageref{pagesLTS.Roman.local}~pages with Roman numbers:\\
+\lastpages{Roman}{1}~pages in the first Roman sector
+(\pageref{Roman}{\hskip3em }-\lastpageref{pagesLTS.Roman.1}{\hskip3em }),\\
+\lastpages{Roman}{2}~pages in the second Roman sector
+(\pageref{Roman2}{\hskip3em }-\lastpageref{pagesLTS.Roman.2}{\hskip3em }), and\\
+\lastpages{Roman}{3}~pages in the third Roman sector
+(\pageref{Roman3}{\hskip3em }-\lastpageref{pagesLTS.Roman.3}{\hskip3em }).\\
+
+\noindent Last arabic page (pagesLTS.arabic): \lastpageref{pagesLTS.arabic}{\hskip5em }
+(There are only \lastpageref{pagesLTS.arabic.local} pages with arabic numbers,
+because an \texttt{\textbackslash addtocounter\{page\}\{\arabic{pagesLTS.exampleArabic}\}} was used.)\\
+
+\noindent Last fnsymbol page (pagesLTS.fnsymbol): \lastpageref{pagesLTS.fnsymbol} \\
+(\texttt{\textbackslash lastpageref\{pagesLTS.fnsymbol\}} -- never
+\texttt{\textbackslash pageref\{pagesLTS.fnsymbol\}}!)\\
+(There are \lastpageref{pagesLTS.fnsymbol.local} pages with fnsymbol numbers.)\\
+
+\noindent Last alph page (pagesLTS.alph): \lastpageref{pagesLTS.alph}{\hskip4em }
+(There are only \lastpageref{pagesLTS.alph.local} pages with alph numbers,
+because an \texttt{\textbackslash addtocounter\{page\}\{\arabic{pagesLTS.examplealph}\}} was used.)\\
+
+\noindent Last Alph page (pagesLTS.Alph): \lastpageref{pagesLTS.Alph}{\hskip4em }
+(There are \lastpageref{pagesLTS.Alph.local} pages with Alph numbers.)\\
+
+\noindent Last page's \textit{name} (LastPage): \lastpageref{LastPage}\\
+
+\noindent Very last page's \textit{name} (VeryLastPage): \lastpageref{VeryLastPage}\\
+(\texttt{LastPage} and \texttt{VeryLastPage} are identical, unless
+a package with output \linebreak
+\texttt{\textbackslash AtEndDocument} after the \textsf{pagesLTS} package
+was added.)\\
+
+\noindent Last page's \textit{number} (LastPages): \lastpageref{LastPages}{\hskip3em }
+(=~total number of pages)\\
+
+\lipsum[1-3]
+
+\newpage
+
+\lastpageref{pagesLTS.Roman}
+(\texttt{\textbackslash lastpageref\{pagesLTS.Roman\}})
+\textbf{does} refers to this page, because the option
+\texttt{pagecontinue=true} was chosen. Also\\
+\texttt{\textbackslash lastpageref\{pagesLTS.Roman.3\}}
+can be used: \lastpageref{pagesLTS.Roman.3}.\\
+
+\bigskip
+
+There are \lastpages{Roman}{3}~pages
+(\texttt{\textbackslash lastpages\{Roman\}\{3\}})
+in this third Roman sector.\\
+
+\newpage
+
+\pagenumbering{Alph}
+
+\section{Alph}
+
+\noindent First page (\texttt{\textbackslash lastpageref\{pagesLTS.0\}}):
+ \lastpageref{pagesLTS.0}\\
+
+\noindent The page (\texttt{\textbackslash thepage}): \thepage \\
+
+\noindent Current page (\texttt{\textbackslash theCurrentPage}),
+i.\,e. counted continuously from the first page): \theCurrentPage \\
+
+\noindent CurrentPageLocal (\texttt{\textbackslash theCurrentPageLocal}),
+i.\,e. counted continuously from the first page of the
+current page numbering sheme): \theCurrentPageLocal \\
+
+\noindent Last roman page (pagesLTS.roman): \lastpageref{pagesLTS.roman}{\hskip4em }
+(There are \lastpageref{pagesLTS.roman.local} pages with roman numbers.)\\
+
+\noindent Last Roman page (pagesLTS.Roman): \lastpageref{pagesLTS.Roman}{\hskip3em }
+(There are \lastpageref{pagesLTS.Roman.local}~pages with Roman numbers:\\
+\lastpages{Roman}{1}~pages in the first Roman sector
+(\pageref{Roman}{\hskip3em }-\lastpageref{pagesLTS.Roman.1}{\hskip3em }),\\
+\lastpages{Roman}{2}~pages in the second Roman sector
+(\pageref{Roman2}{\hskip3em }-\lastpageref{pagesLTS.Roman.2}{\hskip3em }), and\\
+\lastpages{Roman}{3}~pages in the third Roman sector
+(\pageref{Roman3}{\hskip3em }-\lastpageref{pagesLTS.Roman.3}{\hskip3em }).\\
+
+\noindent Last arabic page (pagesLTS.arabic): \lastpageref{pagesLTS.arabic}{\hskip5em }
+(There are only \lastpageref{pagesLTS.arabic.local} pages with arabic numbers,
+because an \texttt{\textbackslash addtocounter\{page\}\{\arabic{pagesLTS.exampleArabic}\}} was used.)\\
+
+\noindent Last fnsymbol page (pagesLTS.fnsymbol): \lastpageref{pagesLTS.fnsymbol} \\
+(\texttt{\textbackslash lastpageref\{pagesLTS.fnsymbol\}} -- never
+\texttt{\textbackslash pageref\{pagesLTS.fnsymbol\}}!)\\
+(There are \lastpageref{pagesLTS.fnsymbol.local} pages with fnsymbol numbers.)\\
+
+\noindent Last alph page (pagesLTS.alph): \lastpageref{pagesLTS.alph}{\hskip4em }
+(There are only \lastpageref{pagesLTS.alph.local} pages with alph numbers,
+because an \texttt{\textbackslash addtocounter\{page\}\{\arabic{pagesLTS.examplealph}\}} was used.)\\
+
+\noindent Last Alph page (pagesLTS.Alph): \lastpageref{pagesLTS.Alph}{\hskip4em }
+(There are \lastpageref{pagesLTS.Alph.local} pages with Alph numbers.)\\
+
+\noindent Last page's \textit{name} (LastPage): \lastpageref{LastPage}\\
+
+\noindent Very last page's \textit{name} (VeryLastPage): \lastpageref{VeryLastPage}\\
+(\texttt{LastPage} and \texttt{VeryLastPage} are identical, unless
+a package with output \linebreak
+\texttt{\textbackslash AtEndDocument} after the \textsf{pagesLTS} package
+was added.)\\
+
+\noindent Last page's \textit{number} (LastPages): \lastpageref{LastPages}{\hskip3em }
+(=~total number of pages)\\
+
+\lipsum[1-3]
+
+Without option \texttt{alphMulti=AB} of the \textsf{pagesLTS} (and the help of
+Heiko Oberdiek's \textsf{alphalph} package), after page
+\textquotedblleft Z\textquotedblright\ there would just appear a
+\begin{quote}
+\begin{verbatim}
+LaTeX Error: Counter too large
+See the LaTeX manual or LaTeX Companion for explanation.
+You've lost some text.  Try typing  <return>  to proceed.
+If that doesn't work, type  X <return>  to quit.
+\end{verbatim}
+\end{quote}
+Now the page numbers are continued AA, AB, AC,\ldots\ (AA, BB, CC,\ldots\ is
+also possible, see the \textsf{pagesLTS} documentation).\\
+This is not demonstrated here, but see section~\ref{alph}.
+
+\newpage
+
+\section{The End}
+
+\noindent First page (\texttt{\textbackslash lastpageref\{pagesLTS.0\}}):
+ \lastpageref{pagesLTS.0}\\
+
+\noindent The page (\texttt{\textbackslash thepage}): \thepage \\
+
+\noindent Current page (\texttt{\textbackslash theCurrentPage}),
+i.\,e. counted continuously from the first page): \theCurrentPage \\
+
+\noindent CurrentPageLocal (\texttt{\textbackslash theCurrentPageLocal}),
+i.\,e. counted continuously from the first page of the
+current page numbering sheme): \theCurrentPageLocal \\
+
+\noindent Last roman page (pagesLTS.roman): \lastpageref{pagesLTS.roman}{\hskip4em }
+(There are \lastpageref{pagesLTS.roman.local} pages with roman numbers.)\\
+
+\noindent Last Roman page (pagesLTS.Roman): \lastpageref{pagesLTS.Roman}{\hskip3em }
+(There are \lastpageref{pagesLTS.Roman.local}~pages with Roman numbers:\\
+\lastpages{Roman}{1}~pages in the first Roman sector
+(\pageref{Roman}{\hskip3em }-\lastpageref{pagesLTS.Roman.1}{\hskip3em }),\\
+\lastpages{Roman}{2}~pages in the second Roman sector
+(\pageref{Roman2}{\hskip3em }-\lastpageref{pagesLTS.Roman.2}{\hskip3em }), and\\
+\lastpages{Roman}{3}~pages in the third Roman sector
+(\pageref{Roman3}{\hskip3em }-\lastpageref{pagesLTS.Roman.3}{\hskip3em }).\\
+
+\noindent Last arabic page (pagesLTS.arabic): \lastpageref{pagesLTS.arabic}{\hskip5em }
+(There are only \lastpageref{pagesLTS.arabic.local} pages with arabic numbers,
+because an \texttt{\textbackslash addtocounter\{page\}\{\arabic{pagesLTS.exampleArabic}\}} was used.)\\
+
+\noindent Last fnsymbol page (pagesLTS.fnsymbol): \lastpageref{pagesLTS.fnsymbol} \\
+(\texttt{\textbackslash lastpageref\{pagesLTS.fnsymbol\}} -- never
+\texttt{\textbackslash pageref\{pagesLTS.fnsymbol\}}!)\\
+(There are \lastpageref{pagesLTS.fnsymbol.local} pages with fnsymbol numbers.)\\
+
+\noindent Last alph page (pagesLTS.alph): \lastpageref{pagesLTS.alph}{\hskip4em }
+(There are only \lastpageref{pagesLTS.alph.local} pages with alph numbers,
+because an \texttt{\textbackslash addtocounter\{page\}\{\arabic{pagesLTS.examplealph}\}} was used.)\\
+
+\noindent Last Alph page (pagesLTS.Alph): \lastpageref{pagesLTS.Alph}{\hskip4em }
+(There are \lastpageref{pagesLTS.Alph.local} pages with Alph numbers.)\\
+
+\noindent Last page's \textit{name} (LastPage): \lastpageref{LastPage}\\
+
+\noindent Very last page's \textit{name} (VeryLastPage): \lastpageref{VeryLastPage}\\
+(\texttt{LastPage} and \texttt{VeryLastPage} are identical, unless
+a package with output \linebreak
+\texttt{\textbackslash AtEndDocument} after the \textsf{pagesLTS} package
+was added.)\\
+
+\noindent Last page's \textit{number} (LastPages): \lastpageref{LastPages}{\hskip3em }
+(=~total number of pages)\\
+
+\medskip
+
+\noindent Page \thepage\ (\theCurrentPage; local: \theCurrentPageLocal) of %
+\lastpageref{pagesLTS.roman} (\lastpageref{pagesLTS.roman.local}) + %
+\lastpageref{pagesLTS.Roman} (\lastpageref{pagesLTS.Roman.local}) + %
+\lastpageref{pagesLTS.arabic} (\lastpageref{pagesLTS.arabic.local}) + %
+\lastpageref{pagesLTS.fnsymbol} (\lastpageref{pagesLTS.fnsymbol.local}) + %
+\lastpageref{pagesLTS.alph} (\lastpageref{pagesLTS.alph.local}) + %
+\lastpageref{pagesLTS.Alph} (\lastpageref{pagesLTS.Alph.local}) = %
+\lastpageref{LastPages} pages.
+
+\end{document}
+\endinput
+%%
+%% End of file `pagesLTS-example.tex'.
diff --git a/Master/texmf-dist/doc/latex/pageslts/pagesLTS.pdf b/Master/texmf-dist/doc/latex/pageslts/pagesLTS.pdf
new file mode 100644
index 00000000000..1966ac4b7f2
--- /dev/null
+++ b/Master/texmf-dist/doc/latex/pageslts/pagesLTS.pdf
diff --git a/Master/texmf-dist/source/latex/pageslts/pagesLTS.drv b/Master/texmf-dist/source/latex/pageslts/pagesLTS.drv
new file mode 100644
index 00000000000..9f5e33db690
--- /dev/null
+++ b/Master/texmf-dist/source/latex/pageslts/pagesLTS.drv
@@ -0,0 +1,109 @@
+%%
+%% This is file `pagesLTS.drv',
+%% generated with the docstrip utility.
+%%
+%% The original source files were:
+%%
+%% pagesLTS.dtx  (with options: `driver')
+%% 
+%% This is a generated file.
+%% 
+%% IMPORTANT NOTICE:
+%% On the first page backslash pagenumbering should be called
+%% (with the appropriate argument out of e.g.
+%%  * roman - Lowercase Roman numerals: i, ii, iii, iv,...
+%%  * Roman - Uppercase Roman numerals: I, II, III, IV,...
+%%  * arabic - Arabic numerals: 1, 2, 3, 4,...
+%%  * alph - Lowercase letters: a, b, c, d,...
+%%  * Alph - Uppercase letters: A, B, C, D,...
+%%  * fnsymbol - Footnote symbols: *, † (ddagger), ‡ (dddagger),
+%%                                 § (mathsection),...
+%% ). The command backslash pagenumbering is renewed, but no change
+%% should be visible to the output text, because only labels are added.
+%% backslash OrigPagenumbering can be used to get the original meaning
+%% of backslash pagenumbering, but in that case this package does not
+%% see the change in the page numbering scheme and will make mistakes.
+%% The package takes options.
+%% 
+%% The usual disclaimers apply:
+%% If it doesn't work right that's your problem.
+%% (Nevertheless, send an e-mail to the maintainer
+%%  when you find an error in this package.)
+%% 
+%% This work may be distributed and/or modified under the
+%% conditions of the LaTeX Project Public License, either
+%% version 1.3c of this license or (at your option) any later
+%% version. This version of this license is in
+%%    http://www.latex-project.org/lppl/lppl-1-3c.txt
+%% and the latest version of this license is in
+%%    http://www.latex-project.org/lppl.txt
+%% and version 1.3c or later is part of all distributions of
+%% LaTeX version 2005/12/01 or later.
+%% 
+%% This work has the LPPL maintenance status "maintained".
+%% 
+%% The Current Maintainer of this work is H.-Martin Muench
+%% (Martin dot Muench at Uni-Bonn dot de).
+%% 
+%% This package first started as a revision of the lastpage
+%% package of Jeffrey P. Goldberg (jeffrey+news at goldmark dot org),
+%% but it became obviouse that a replacement was needed.
+%% 
+%% This work consists of the main source file pagesLTS.dtx
+%% and the derived files
+%%    pagesLTS.sty, pagesLTS.pdf, pagesLTS.ins, pagesLTS.drv,
+%%    pagesLTS-example.tex.
+%% 
+\NeedsTeXFormat{LaTeX2e}[1994/06/01]
+\ProvidesFile{pagesLTS.drv}[2010/06/03 v1.1b%
+            Refers to special pages' numbers/names (HMM)]%
+\documentclass[landscape]{ltxdoc}[2007/11/11]% v2.0u
+\usepackage{geometry}[2010/03/13]% v5.3
+\usepackage{holtxdoc}[2010/04/18]% v0.18
+%% pagesLTS may work with earlier versions of LaTeX2e and those
+%% class and package, but this was not tested.
+%% Please consider updating your LaTeX, class, and package
+%% to the most recent version (if they are not already the most
+%% recent version).
+%% Warning: holtxdoc, 2010/04/18 v0.18, requires the packages
+%% hypdoc, 2010/03/26
+%% hyperref, 2010/03/30
+%% pdftexcmds, 2010/04/01
+%% ltxcmds, 2010/03/09
+%% hologo, 2010/04/08
+%% array
+%% and does neither work with nor check for earlier versions!
+\hypersetup{%
+ pdfsubject={Refers to special pages' numbers/names (HMM)},%
+ pdfkeywords={LaTeX, pagesLTS, lastpage, page number, page name, Hans-Martin Muench},%
+ pdfencoding=auto,%
+ pdflang={en},%
+ breaklinks=true,%
+ linktoc=all,%
+ pdfstartview=FitH,%
+ pdfpagelayout=OneColumn,%
+ bookmarksnumbered=true,%
+ bookmarksopen=true,%
+ bookmarksopenlevel=2,%
+ pdfmenubar=true,%
+ pdftoolbar=true,%
+ pdfwindowui=true,%
+ pdfnewwindow=true%
+}
+\setlength\hfuzz{1pt} % Ignore slight overfulls.
+\CodelineIndex
+\EnableCrossrefs
+\hyphenation{created every-thing ignored}
+\makeatletter
+%% Code from tcilatex.tex, Macros for Scientific Word and Scientific WorkPlace 5.5 <06 Oct 2005> %%
+%% Copyright (C) 2005 Mackichan Software, Inc.                                                   %%
+%% That macro file is NOT proprietary and may be freely copied and distributed.                  %%
+  \def\unit#1{\mathord{\thinspace\rm #1}}%
+%% End of code from tcilatex.tex                                                                 %%
+\makeatother
+\begin{document}
+  \DocInput{pagesLTS.dtx}%
+\end{document}
+\endinput
+%%
+%% End of file `pagesLTS.drv'.
diff --git a/Master/texmf-dist/source/latex/pageslts/pagesLTS.dtx b/Master/texmf-dist/source/latex/pageslts/pagesLTS.dtx
new file mode 100644
index 00000000000..6d6147049df
--- /dev/null
+++ b/Master/texmf-dist/source/latex/pageslts/pagesLTS.dtx
@@ -0,0 +1,4747 @@
+% \iffalse meta-comment
+%
+% pagesLTS package
+% file version: v1.1b
+% file date:          2010/06/03
+% documentation date: 2010/06/03
+%
+% Copyright (C) 2010 H.-Martin M\"{u}nch (Martin dot Muench at Uni-Bonn dot de)
+% Portions of code copyrighted by other people as marked.
+%
+% This package first started as a revision of the \textsf{lastpage}
+% package of Jeffrey P. Goldberg (jeffrey+news at goldmark dot org),
+% but it became obviouse that a replacement was needed.
+%
+% This work may be distributed and/or modified under the
+% conditions of the LaTeX Project Public License, either
+% version 1.3c of this license or (at your option) any later
+% version. This version of this license is in
+%    http://www.latex-project.org/lppl/lppl-1-3c.txt
+% and the latest version of this license is in
+%    http://www.latex-project.org/lppl.txt
+% and version 1.3c or later is part of all distributions of
+% LaTeX version 2005/12/01 or later.
+%
+% This work has the LPPL maintenance status "maintained".
+%
+% The Current Maintainer of this work is H.-Martin Muench.
+%
+% This work consists of the main source file pagesLTS.dtx
+% and the derived files
+%    pagesLTS.sty, pagesLTS.ins, pagesLTS.drv,
+%    pagesLTS-example.tex, pagesLTS.pdf.
+%
+% Unpacking:
+%    (a) If pagesLTS.ins is present:
+%           tex pagesLTS.ins
+%    (b) Without pagesLTS.ins:
+%           tex pagesLTS.dtx
+%    (c) If you insist on using LaTeX
+%           latex \let\install=y\input{pagesLTS.dtx}
+%        (quote the arguments according to the demands of your shell)
+%
+% Documentation:
+%    (a) If pagesLTS.drv is present:
+%           (pdf)latex pagesLTS.drv
+%           makeindex -s gind.ist pagesLTS.idx
+%           (pdf)latex pagesLTS.drv
+%           makeindex -s gind.ist pagesLTS.idx
+%           (pdf)latex pagesLTS.drv
+%    (b) Without pagesLTS.drv:
+%           (pdf)latex pagesLTS.dtx
+%           makeindex -s gind.ist pagesLTS.idx
+%           (pdf)latex pagesLTS.dtx
+%           makeindex -s gind.ist pagesLTS.idx
+%           (pdf)latex pagesLTS.dtx
+%
+%    The class ltxdoc loads the configuration file ltxdoc.cfg
+%    if available. Here you can specify further options, e.g.
+%    use DIN A4 as paper format:
+%       \PassOptionsToClass{a4paper}{article}
+%
+%    Programm calls to get the documentation (for example):
+%       pdflatex pagesLTS.dtx
+%       makeindex -s gind.ist pagesLTS.idx
+%       % makeindex -s gglo.ist -o pagesLTS.gls pagesLTS.glo
+%       pdflatex pagesLTS.dtx
+%       makeindex -s gind.ist pagesLTS.idx
+%       % makeindex -s gglo.ist -o pagesLTS.gls pagesLTS.glo
+%       pdflatex pagesLTS.dtx
+%
+% Installation:
+%    TDS:tex/latex/muench/pagesLTS/pagesLTS.sty
+%    TDS:doc/latex/muench/pagesLTS/pagesLTS.pdf
+%    TDS:doc/latex/muench/pagesLTS/pagesLTS-example.tex
+%    TDS:source/latex/muench/pagesLTS/pagesLTS.dtx
+%
+%<*ignore>
+\begingroup
+  \def\x{LaTeX2e}%
+\expandafter\endgroup
+\ifcase 0\ifx\install y1\fi\expandafter
+         \ifx\csname processbatchFile\endcsname\relax\else1\fi
+         \ifx\fmtname\x\else 1\fi\relax
+\else\csname fi\endcsname
+%</ignore>
+%<*install>
+\input docstrip.tex
+
+\obeyspaces
+\Msg{*****************************************************}
+\Msg{* Installation                                      *}
+\Msg{* Package: pagesLTS v1.1b 2010/06/03 LaTeX2e package *}
+\Msg{* Refers to special pages' numbers/names (HMM)      *}
+\Msg{*****************************************************}
+
+\keepsilent
+\askforoverwritefalse
+
+\let\MetaPrefix\relax
+\preamble
+
+This is a generated file.
+
+IMPORTANT NOTICE:
+On the first page backslash pagenumbering should be called
+(with the appropriate argument out of e.g.
+ * roman - Lowercase Roman numerals: i, ii, iii, iv,...
+ * Roman - Uppercase Roman numerals: I, II, III, IV,...
+ * arabic - Arabic numerals: 1, 2, 3, 4,...
+ * alph - Lowercase letters: a, b, c, d,...
+ * Alph - Uppercase letters: A, B, C, D,...
+ * fnsymbol - Footnote symbols: *, † (ddagger), ‡ (dddagger),
+                                § (mathsection),...
+). The command backslash pagenumbering is renewed, but no change
+should be visible to the output text, because only labels are added.
+backslash OrigPagenumbering can be used to get the original meaning
+of backslash pagenumbering, but in that case this package does not
+see the change in the page numbering scheme and will make mistakes.
+The package takes options.
+
+The usual disclaimers apply:
+If it doesn't work right that's your problem.
+(Nevertheless, send an e-mail to the maintainer
+ when you find an error in this package.)
+
+This work may be distributed and/or modified under the
+conditions of the LaTeX Project Public License, either
+version 1.3c of this license or (at your option) any later
+version. This version of this license is in
+   http://www.latex-project.org/lppl/lppl-1-3c.txt
+and the latest version of this license is in
+   http://www.latex-project.org/lppl.txt
+and version 1.3c or later is part of all distributions of
+LaTeX version 2005/12/01 or later.
+
+This work has the LPPL maintenance status "maintained".
+
+The Current Maintainer of this work is H.-Martin Muench
+(Martin dot Muench at Uni-Bonn dot de).
+
+This package first started as a revision of the lastpage
+package of Jeffrey P. Goldberg (jeffrey+news at goldmark dot org),
+but it became obviouse that a replacement was needed.
+
+This work consists of the main source file pagesLTS.dtx
+and the derived files
+   pagesLTS.sty, pagesLTS.pdf, pagesLTS.ins, pagesLTS.drv,
+   pagesLTS-example.tex.
+
+\endpreamble
+\let\MetaPrefix\DoubleperCent
+
+\generate{%
+  \file{pagesLTS.ins}{\from{pagesLTS.dtx}{install}}%
+  \file{pagesLTS.drv}{\from{pagesLTS.dtx}{driver}}%
+  \file{ltxdoc.cfg}{\from{pagesLTS.dtx}{ltxdoc}}%
+  %%\file{lastpage209.sty}{\from{pagesLTS.dtx}{lastpage209}}%
+  \usedir{tex/latex/muench/pagesLTS}%
+  \file{pagesLTS.sty}{\from{pagesLTS.dtx}{package}}%
+  \usedir{doc/latex/muench/pagesLTS}%
+  \file{pagesLTS-example.tex}{\from{pagesLTS.dtx}{example}}%
+}
+
+\obeyspaces
+\Msg{**************************************************************}
+\Msg{*                                                            *}
+\Msg{* To finish the installation you have to move the following  *}
+\Msg{* file into a directory searched by TeX:                     *}
+\Msg{*                                                            *}
+\Msg{* pagesLTS.sty                                               *}
+\Msg{*                                                            *}
+\Msg{* To produce the documentation run the file `pagesLTS.drv'   *}
+\Msg{* through (pdf)LaTeX, e. g.                                  *}
+\Msg{*  pdflatex pagesLTS.dtx                                     *}
+\Msg{*  makeindex -s gind.ist pagesLTS.idx                        *}
+\Msg{*  pdflatex pagesLTS.dtx                                     *}
+\Msg{*  makeindex -s gind.ist pagesLTS.idx                        *}
+\Msg{*  pdflatex pagesLTS.dtx                                     *}
+\Msg{*                                                            *}
+\Msg{* At least three runs are necessary e. g. to get the         *}
+\Msg{*  references right!                                         *}
+\Msg{*                                                            *}
+\Msg{* Happy TeXing!                                              *}
+\Msg{*                                                            *}
+\Msg{**************************************************************}
+
+\endbatchfile
+
+%</install>
+%<*ignore>
+\fi
+%</ignore>
+%
+% \section{The documentation driver file}
+%
+% The next bit of code contains the documentation driver file for
+% \TeX{}, i.\,e., the file that will produce the documentation you
+% are currently reading. It will be extracted from this file by the
+% \texttt{docstrip} programme. That is, run \LaTeX\ on \texttt{docstrip}
+% and specify the \texttt{driver} option when \texttt{docstrip}
+% asks for options.
+%
+%    \begin{macrocode}
+%<*driver>
+\NeedsTeXFormat{LaTeX2e}[1994/06/01]
+\ProvidesFile{pagesLTS.drv}[2010/06/03 v1.1b%
+            Refers to special pages' numbers/names (HMM)]%
+\documentclass[landscape]{ltxdoc}[2007/11/11]% v2.0u
+\usepackage{geometry}[2010/03/13]% v5.3
+\usepackage{holtxdoc}[2010/04/18]% v0.18
+%% pagesLTS may work with earlier versions of LaTeX2e and those
+%% class and package, but this was not tested.
+%% Please consider updating your LaTeX, class, and package
+%% to the most recent version (if they are not already the most
+%% recent version).
+%% Warning: holtxdoc, 2010/04/18 v0.18, requires the packages
+%% hypdoc, 2010/03/26
+%% hyperref, 2010/03/30
+%% pdftexcmds, 2010/04/01
+%% ltxcmds, 2010/03/09
+%% hologo, 2010/04/08
+%% array
+%% and does neither work with nor check for earlier versions!
+\hypersetup{%
+ pdfsubject={Refers to special pages' numbers/names (HMM)},%
+ pdfkeywords={LaTeX, pagesLTS, lastpage, page number, page name, Hans-Martin Muench},%
+ pdfencoding=auto,%
+ pdflang={en},%
+ breaklinks=true,%
+ linktoc=all,%
+ pdfstartview=FitH,%
+ pdfpagelayout=OneColumn,%
+ bookmarksnumbered=true,%
+ bookmarksopen=true,%
+ bookmarksopenlevel=2,%
+ pdfmenubar=true,%
+ pdftoolbar=true,%
+ pdfwindowui=true,%
+ pdfnewwindow=true%
+}
+\setlength\hfuzz{1pt} % Ignore slight overfulls.
+\CodelineIndex
+%\PageIndex           % instead of \CodelineIndex to get the page numbers
+\EnableCrossrefs
+%\DisableCrossrefs    % Say \DisableCrossrefs if index is ready.
+%\RecordChanges       % Gather update information.
+%\OnlyDescription     % Comment out for implementation details.
+\hyphenation{created every-thing ignored}
+\makeatletter
+%% Code from tcilatex.tex, Macros for Scientific Word and Scientific WorkPlace 5.5 <06 Oct 2005> %%
+%% Copyright (C) 2005 Mackichan Software, Inc.                                                   %%
+%% That macro file is NOT proprietary and may be freely copied and distributed.                  %%
+  \def\unit#1{\mathord{\thinspace\rm #1}}%
+%% End of code from tcilatex.tex                                                                 %%
+\makeatother
+\begin{document}
+  \DocInput{pagesLTS.dtx}%
+\end{document}
+%</driver>
+%    \end{macrocode}
+%
+%    \begin{macrocode}
+%<*ltxdoc>
+\NeedsTeXFormat{LaTeX2e}[1994/06/01]
+\ProvidesFile{ltxdoc.cfg}[2010/05/15 v1.0 configuration file for pagesLTS (HMM)]
+  %% Code from original ltxdoc.cfg [2007/01/08 latex-tds: ltxdoc.cls configuration (HO)],  %%
+  % copyrighted 2006, 2007 Heiko Oberdiek, part of project `latex-tds'.
+  % That file may be distributed and/or modified under the
+  % conditions of the LaTeX Project Public License, either version 1.3
+  % of this license or (at your option) any later version.
+  % The latest version of this license is in
+  %   http://www.latex-project.org/lppl.txt
+  % and version 1.3c or later is part of all distributions of LaTeX
+  % version 2005/12/01 or later.
+  % That work has the LPPL maintenance status `maintained'.
+  % The Current Maintainer of that work is Heiko Oberdiek.
+  %
+  \PassOptionsToClass{a4paper}{article}
+  \AtEndOfClass{%
+    \RequirePackage[numbered]{hypdoc}[2010/03/26]% v1.9
+    \pdfstringdefDisableCommands{%
+      \let\env\relax % longtable.dtx
+      \let\mytt\relax % tabularx.dtx
+    }%
+    \addtolength{\topmargin}{-10mm}%
+    \addtolength{\textheight}{20mm}%
+    % Depending on the page style, the head or foot area
+    % are put into the text area.
+    % Usually the page style is the default "plain".
+    % tools/verbatim.dtx uses "myheadings".
+    \def\string@plain{plain}%
+    \def\string@myheadings{myheadings}%
+    \def\current@pagestyle{plain}%
+    \let\ltxdoc@cfg@pagestyle\pagestyle
+    \def\pagestyle#1{%
+      \def\current@pagestyle{#1}%
+      \ltxdoc@cfg@pagestyle{#1}%
+    }%
+    \edef\ltxdoc@cfg@jobname{\jobname}%
+    \def\ltxdoc@cfg@longtable{longtable}%
+    \@onelevel@sanitize\ltxdoc@cfg@longtable
+    \ifx\ltxdoc@cfg@jobname\ltxdoc@cfg@longtable
+      \def\current@pagestyle{both}%
+    \fi
+    \let\ltxdoc@cfg@document\document
+    \def\document{%
+      \ifx\current@pagestyle\string@plain
+        \addtolength{\textheight}{\headheight}%
+        \addtolength{\textheight}{\headsep}%
+        \setlength{\headheight}{0pt}%
+        \setlength{\headsep}{0pt}%
+        \global\textheight\textheight
+        \global\headheight\headheight
+        \global\headsep\headsep
+      \fi
+      \ifx\current@pagestyle\string@myheadings
+        \addtolength{\textheight}{\footskip}%
+        \global\textheight\textheight
+      \fi
+      \ltxdoc@cfg@document
+    }%
+  %% End of code from original ltxdoc.cfg [2007/01/08 latex-tds: ltxdoc.cls configuration (HO)]  %%
+  %% Place additional code here.  %%
+  }
+
+%</ltxdoc>
+%    \end{macrocode}
+%
+% \fi
+%
+% \CheckSum{0}
+%
+% \CharacterTable
+%  {Upper-case    \A\B\C\D\E\F\G\H\I\J\K\L\M\N\O\P\Q\R\S\T\U\V\W\X\Y\Z
+%   Lower-case    \a\b\c\d\e\f\g\h\i\j\k\l\m\n\o\p\q\r\s\t\u\v\w\x\y\z
+%   Digits        \0\1\2\3\4\5\6\7\8\9
+%   Exclamation   \!     Double quote  \"     Hash (number) \#
+%   Dollar        \$     Percent       \%     Ampersand     \&
+%   Acute accent  \'     Left paren    \(     Right paren   \)
+%   Asterisk      \*     Plus          \+     Comma         \,
+%   Minus         \-     Point         \.     Solidus       \/
+%   Colon         \:     Semicolon     \;     Less than     \<
+%   Equals        \=     Greater than  \>     Question mark \?
+%   Commercial at \@     Left bracket  \[     Backslash    \\
+%   Right bracket \]     Circumflex    \^     Underscore    \_
+%   Grave accent  \`     Left brace    \{     Vertical bar  \|
+%   Right brace   \}     Tilde         \~}
+%
+% \GetFileInfo{pagesLTS.drv}
+%
+% \begingroup
+%   \def\x{\#,\$,\^,\_,\~,\ ,\&,\{,\},\%}%
+%   \makeatletter
+%   \@onelevel@sanitize\x
+% \expandafter\endgroup
+% \expandafter\DoNotIndex\expandafter{\x}
+% \expandafter\DoNotIndex\expandafter{\string\ }
+% \begingroup
+%   \makeatletter
+%     \lccode`9=32\relax
+%     \lowercase{%^^A
+%       \edef\x{\noexpand\DoNotIndex{\@backslashchar9}}%^^A
+%     }%^^A
+%   \expandafter\endgroup\x
+% \DoNotIndex{\documentclass,\usepackage,\hfuzz,\small,\tt,\begin,\end}
+% \DoNotIndex{\NeedsTeXFormat,\filedate,\fileversion,\DoNotIndex}
+% \DoNotIndex{\def,\edef,\divide,\advance,\multiply}
+% \DoNotIndex{\",\-,\,,\\,\hskip,\H,\ldots,\indent,\noindent,\textbackslash}
+% \DoNotIndex{\textbf,\textit,\textquotedblleft,\textquotedblright,\textsf,\texttt}
+% \DoNotIndex{\ifthenelse,\and,\equal,\whiledo,\if,\ifx,\ifnum,\else,\fi}
+% \DoNotIndex{\CodelineIndex,\EnableCrossrefs,\DisableCrossrefs}
+% \DoNotIndex{\DocInput,\AltMacroFont}
+% \DoNotIndex{\@ne,\tw@,\thr@@}
+% \DoNotIndex{\newpage,\pagebreak,\newline,\linebreak,\nolinebreak}
+% \DoNotIndex{\lipsum,\MessageBreak,\pageref,\protect}
+% \DoNotIndex{\RecordChanges,\OnlyDescription}
+% \DoNotIndex{\smallskip,\medskip,\bigskip,\space}
+% \DoNotIndex{\item}
+% \DoNotIndex{\plainTeX,\TeX,\LaTeX,\pdfLaTeX}
+% \DoNotIndex{option: pagecontinue}
+% \DoNotIndex{{pagesLTS.arabic, pagesLTS.roman, pagesLTS.Roman, pagesLTS.alph, pagesLTS.Alph,\ldots }}
+%
+% \title{The \textsf{pagesLTS} package\footnote{This file%
+%        has version number v1.1b, last%
+%        revised 2010/06/03, documentation dated 2010/06/03.}}
+% \author{H.-Martin M\"{u}nch\\
+% (\texttt{Martin dot Muench at Uni-Bonn dot de})}
+% \date{2010/06/03}
+%
+% \maketitle
+%
+% \begin{abstract}
+%  This package puts the labels \texttt{LastPage}
+%  (\texttt{\textbackslash AtEndDocument}) and
+%  \texttt{VeryLastPage} (\texttt{\textbackslash AfterLastShipout})
+%  into the \texttt{.aux} file, allowing the user to refer
+%  to the (very) last page of a document. This might be
+%  particularly useful in places like headers or footers.
+%  When more than one page numbering scheme is used,
+%  these references do not give the total \textit{number} of pages.
+%  For this case the label \texttt{LastPages} is introduced.
+%  Additionally, at the last page of each page numbering
+%  scheme a label \texttt{pagesLTS.<numbering scheme>} is
+%  placed, where \texttt{<numbering scheme>} is e.\,g.
+%  arabic, roman, Roman, alph, or Alph. For fnsymbol
+%  please use \texttt{\textbackslash lastpageref\{pagesLTS.fnsymbol\}}
+%  instead of \texttt{\textbackslash pageref\{pagesLTS.fnsymbol\}}.
+%  When the same numbering scheme is used twice,
+%  the page numbers are either reset to one or continued
+%  automatically, depending on the option given when the package
+%  is called. The command \texttt{\textbackslash theCurrentPage}
+%  prints the current total/absolute page number -- in contrast to
+%  \texttt{\textbackslash thepage}, which gives only the page
+%  \textit{name} in the current page numbering scheme.
+%  \texttt{\textbackslash theCurrentPageLocal} gives the current
+%  number of pages in the current page numbering scheme.
+%  \texttt{\textbackslash thepage} and
+%  \texttt{\textbackslash theCurrentPageLocal} are different e.\,g.
+%  when \texttt{\textbackslash addtocounter\{page\}\{\ldots \}} or
+%  \texttt{\textbackslash setcounter\{page\}\{\ldots \}} were used.
+%  At the first page of the document a label \texttt{pagesLTS.0} is
+%  created. This label can be referred to, too.
+%  Further labels are provided for special cases.\\
+%  The \textsf{alphalph} package is supported, i.\,e.
+%  page numbers alph or Alph $>26$ and fnyambol $>9$
+%  can be used (with according options set). Even zero
+%  and negative page numbers can be used with \texttt{arabic},
+%  \texttt{alph}, \texttt{Alph}, \texttt{roman}, \texttt{Roman},
+%  and \texttt{fnsymbol} page numbering (with \textsf{alphalph} package
+%  and according options).
+% \end{abstract}
+%
+% \bigskip
+%
+% \noindent Right after \texttt{\textbackslash begin\{document\}}
+% a \texttt{\textbackslash pagenumbering\{\ldots \}} should be called --
+% with the appropriate argument out of e.\,g.\\
+% arabic (Arabic numerals: 1, 2, 3, 4,\ldots),\\
+% roman (Lowercase Roman numerals: i, ii, iii, iv,\ldots),
+% Roman (Uppercase Roman numerals: I, II, III, IV,\ldots),\\
+% alph (Lowercase letters: a, b, c, d,\ldots),
+% Alph (Uppercase letters: A, B, C, D,\ldots),\\
+% fnsymbol (Footnote symbols: $*$, $\dagger $, $\ddagger $, $\mathsection $,\ldots).
+%
+% \bigskip
+%
+% \noindent This package first started as a revision of the
+% \textsf{lastpage} package of \textbf{Jeffrey P. Goldberg} (Thanks!),
+% but then it became obviouse that a replacement was needed.
+%
+% \bigskip
+%
+% \noindent Disclaimer for web links: The author is not responsible for any contents
+% referred to in this work unless he has full knowledge of illegal contents.
+% If any damage occurs by the use of information presented there, only the
+% author of the respective pages might be liable, not the one who has referred
+% to these pages.
+%
+% \bigskip
+%
+% \noindent Save per page about $200\unit{ml}$ water,
+% $2\unit{g}$ CO$_{2}$ and $2\unit{g}$ wood:
+% Therefore please print only if this is really necessary.
+%
+% \newpage
+%
+% \tableofcontents
+%
+% \newpage
+%
+% \section{Introduction}
+%
+% \indent This package puts the labels \texttt{LastPage}
+% (\texttt{\textbackslash AtEndDocument}) (like the \textsf{LastPage}
+% package of Jeffrey P. Goldberg) and
+% \texttt{VeryLastPage} (\texttt{\textbackslash AfterLastShipout})
+% into the \texttt{.aux} file, allowing the user to refer
+% to the (very) last page of a document via
+% |\lastpageref{LastPage}| and |\lastpageref{VeryLastPage}|.
+% This might be particularly useful in places like headers or
+% footers. When more than one page numbering scheme is used,
+% these references do not give the total \textit{number} of pages.
+% For this case the label \texttt{LastPages} is introduced
+% (similar to label |TotPages| of the \textsf{TotPages} package,
+% but set later in the document).
+% Additionally, at the last page of each page numbering
+% scheme a label \texttt{pagesLTS.<numbering scheme>} is
+% placed, where \texttt{<numbering scheme>} is e.\,g.
+% arabic, roman, Roman, alph, or Alph. For fnsymbol
+% please use \texttt{\textbackslash lastpageref\{pagesLTS.fnsymbol\}}
+% instead of \texttt{\textbackslash pageref\{pagesLTS.fnsymbol\}}.
+% When the same numbering scheme is used twice,
+% the page numbers are either reset to one or continued
+% automatically, depending on the option given when the package
+% is called. The command \texttt{\textbackslash theCurrentPage}
+% prints the current total/absolute page number - in contrast to
+% \texttt{\textbackslash thepage}, which gives only the page
+% \textit{name} in the current page numbering scheme.
+% \texttt{\textbackslash theCurrentPageLocal} gives the current
+% number of pages in the current page numbering scheme.
+% \texttt{\textbackslash thepage} and
+% \texttt{\textbackslash theCurrentPageLocal} are different e.\,g.
+% when \texttt{\textbackslash addtocounter\{page\}\{\ldots \}} or
+% \texttt{\textbackslash setcounter\{page\}\{\ldots \}} were used.
+% (See also \LaTeX\ bug~3421: 3rd~page is even (twoside, titlepage,
+% abstract),
+% \url{http://www.latex-project.org/cgi-bin/ltxbugs2html?category=LaTeX&responsible=anyone&state=anything&keyword=pagenumber&pr=latex%2F3421&search=}.)
+% At the first page of the document a label \texttt{pagesLTS.0} is
+% created. This label can be referred to, too.
+% Further labels are provided for special cases.\\
+% The \textsf{alphalph} package is supported, i.\,e.
+% page numbers \texttt{alph} or \texttt{Alph} $>26$ and
+% \texttt{fnyambol} $>9$ can be used (with the according
+% options set). Even zero or negative page numbers can be used
+% with \texttt{arabic}, \texttt{alph}, \texttt{Alph}, and
+% \texttt{fnsymbol} page numbering (with \textsf{alphalph} package
+% and according options), and zero \texttt{roman} and
+% \texttt{Roman} pages, too.
+%
+% \bigskip
+% \noindent Right after \texttt{\textbackslash begin\{document\}}
+% a \texttt{\textbackslash pagenumbering\{\ldots \}} should be called --
+% with the appropriate argument out of e.\,g.\\
+% arabic (Arabic numerals: 1, 2, 3, 4,\ldots),\\
+% roman (Lowercase Roman numerals: i, ii, iii, iv,\ldots),
+% Roman (Uppercase Roman numerals: I, II, III, IV,\ldots),\\
+% alph (Lowercase letters: a, b, c, d,\ldots),
+% Alph (Uppercase letters: A, B, C, D,\ldots),\\
+% fnsymbol (Footnote symbols: $*$, $\dagger $, $\ddagger $, $\mathsection $,\ldots).
+%
+% \bigskip
+% \noindent This package first started as a revision of the
+% \textsf{lastpage} package of \textbf{Jeffrey P. Goldberg} (Thanks!),
+% but then it became obviouse that a replacement was needed.
+%
+% \bigskip
+% \noindent \textbf{Trademarks} appear throughout this
+% documentation without any trademark symbol; they are the
+% property of their respective trademark owner. There is no
+% intention of infringement; the usage is to the benefit of
+% the trademark owner.
+%
+% \bigskip
+% \phantomsection
+% \DescribeMacro{logical page numbers}
+% \noindent \textbf{Tip}: For the display of the pdf file use
+% \textbf{logical page numbers} together with
+% \textsf{hyperref}!\label{logical page numbers}
+% \begin{description}
+% \item [-] In Adobe Reader 9.3.1 enable:\\
+% \underline{E}dit $>$ Prefere\underline{n}ces (Ctrl+k)
+% $>$ Page Display $>$ Page Content and Information
+% $>$ Use logical page \nolinebreak{\underline{n}umbers\ .}
+%
+% \item[-] Use the \textsf{hyperref} package with option |plainpages=false|\,.
+% \end{description}
+% The display will be e.\,g.\ \textquotedblleft 7~(7~of~9)\textquotedblright,
+% or, in case of Roman instead of arabic numbers,
+% \textquotedblleft VII~(7~of~9)\textquotedblright, and when different
+% page numbers are used (see below) e.\,g. arabic after 10~Roman
+% pages: \textquotedblleft 17~(27~of~30)\textquotedblright.
+% Please try this with the compiled \textsf{pagesLTS-example} file!
+%
+% \bigskip
+% \noindent The name of the \textsf{pagesLTS} package refers to
+% Last, Total, and page numbering Schemes pages.
+%
+% \pagebreak
+%
+% \section{Usage}
+%
+% \indent Just load the package placing
+% \begin{quote}
+%   |\usepackage[<|\textit{options}|>]{pagesLTS}|
+% \end{quote}
+% \noindent in the preamble of your \LaTeXe\ source file
+% (about |\AtEndDocument| see subsection~\ref{ssec:aed})
+% and place a |\pagenumbering{...}| with appropriate argument
+% (e.\,g.~arabic, roman, Roman, fnsymbol, alph, or Alph)
+% right behind |\begin{document}| (see subsubsection~\ref{sss:nopnc})!\\
+%
+% \indent For example for various draft forms it is desirable to have a
+% page reference to the last page, so that e.\,g. page footers can
+% contain something like \textquotedblleft page $N$ of $K$\textquotedblright,
+% where $N$ is the current page and $K$ is the last page. Once the package
+% is loaded, anywhere in the text references can be made
+% to the labels \texttt{LastPage}, \texttt{VeryLastPage}, and
+% \texttt{LastPages} (most times with |\pageref{...}|, but more save
+% with |\lastpageref{...}|).
+% In particular one can use the \textsf{fancyhdr} or \textsf{nccfancyhdr}
+% package, or redefinitions of the page headings and footings to get
+% a reference to the (very) last page.
+%
+% \subsection{Options}
+% \DescribeMacro{options}
+% \indent The \textsf{pagesLTS} package takes the following options:
+%
+% \subsubsection{pagecontinue\label{sss:pagecontinue}}
+% \DescribeMacro{pagecontinue}
+% \indent When option \texttt{pagecontinue=false} is \textbf{not} given
+% (i.\,e. \texttt{pagecontinue} or \texttt{pagecontinue=true}
+% or no \texttt{pagecontinue} option at all), at each
+% |\pagenumbering{...}| command the number of the page numbering
+% will be continued with the page number following the last page
+% of the same page numbering scheme.
+% For example, if there are V~Roman pages in the frontmatter,
+% some arabic ones in the mainmatter, and then Roman ones again
+% in the backmatter, the last ones will start with VI instead
+% of~I again.\\
+% \indent If you want to start with I (or i, 1, a, A, *,\ldots ) again,
+% set option
+% \texttt{pagecontinue=false}. If you want to generally continue
+% the numbers, but for some page numbering scheme do not want this,
+% use \texttt{pagecontinue=true} and say |\setcounter{page}{1}|
+% after |\pagenumbering{...}| for that page numbering scheme.
+%
+% \subsubsection{alphMult, AlphMulti, fnsymbolmult\label{sss:alphalph}}
+%
+% \indent The page number printed in
+% \nolinebreak{\texttt{fnsymbol}\footnote{%
+% \ensuremath  {*},%
+% \ensuremath  {\dagger },%
+% \ensuremath  {\ddagger },%
+% \ensuremath  {\mathsection },%
+% \ensuremath  {\mathparagraph },%
+% \ensuremath  {\delimiter "026B30D },%
+% \ensuremath  {**},%
+% \ensuremath  {\dagger \dagger },%
+% \ensuremath  {\ddagger \ddagger }}}
+% must be $>0$ and $<10$ and those printed in
+% \nolinebreak{\texttt{alph}\footnote{a, b, c, d, e, f, g, h,%
+% i, j, k, l, m, n, o, p, q, r, s, t, u, v, w, x, y, z}} and
+% \nolinebreak{\texttt{Alph}\footnote{A, B, C, D, E, F, G, H,%
+% I, J, K, L, M, N, O, P, Q, R, S, T, U, V, W, X, Y, Z}} must
+% be $>0$ and $<27$. After page~Z\quad \LaTeX\ \textit{should}
+% continue with AA, AB, AC,\ldots\ Some people prefer
+% AA, BB, CC,\ldots, but in hexadecimal it is $AA_{16}=170_{10}$
+% and $171_{10}=AB_{16}$, whereas $BB_{16}=187_{10}$. In any way
+% it should continue at all (maybe even with an user option to
+% choose between the two continuations), but instead only gives
+% an error:
+% \begin{quote}
+%   |LaTeX Error: Counter too large|\\
+%   |See the LaTeX manual or LaTeX Companion for explanation.|\\
+%   |You've lost some text.  Try typing  <return>  to proceed.|\\
+%   |If that doesn't work, type  X <return>  to quit.|
+% \end{quote}
+% But thanks to the \textsf{alphalph} package by Heiko Oberdiek
+% these limitation no longer hold. With his |\erroralph| command
+% now even negative or zero page
+% \textquotedblleft numbers\textquotedblright\ are possible.\\
+%
+% \DescribeMacro{alphMult}
+% The string option \texttt{alphMult} takes three values: ab, bb, 0:
+% \begin{description}
+% \item[ab] After page z, the page
+%  \textquotedblleft numbers\textquotedblright\ continue with
+%  aa, ab, ac, ad,\ldots, fxshrxw (the default), and before a with
+%  0, -a, -b,\ldots, -z, -aa, -ab,\ldots, -fxshrxw ($=-2147483647$).
+% \item[bb] After page z, the page
+%  \textquotedblleft numbers\textquotedblright\ continue with
+%  aa, bb, cc, dd,\ldots, and before a with
+%  0, -a, -b,\ldots, -z, -aa, -bb,\ldots\\
+%  (Internally up~to $\pm 55\,834\,558$ is allowed, but when printed will
+%  exceed the \LaTeX\ capacity even for smaller numbers --
+%  in the example file this happens at about $6\,500$.)\\
+%  (If you have a document with more than
+%   $6\,500$~pages, you might think about splitting it in volumes.
+%   And page \textquotedblleft numbers\textquotedblright\ with
+%   about 100~digits are probably not easy to grasp for the reader, too.)\\
+% \item[0] (zero) The \textsf{pagesLTS} package does nothing,
+%  thus the user is free to define the page
+%  \textquotedblleft numbers\textquotedblright\ after~z and before~a.\\
+%  (But if the user does not do anything at all, the\\
+%  \ |LaTeX Error: Counter too large|\\
+%  will appear again.)
+% \end{description}
+%
+% \DescribeMacro{AlphMulti}
+% The string option \texttt{AlphMulti} takes three values: AB, BB, 0:
+% \begin{description}
+% \item[AB] After page Z, the page
+%  \textquotedblleft numbers\textquotedblright\ continue with
+%  AA, AB, AC, AD,\ldots, FXSHRXW (the default), and before A with
+%  0, -A, -B,\ldots, -Z, -AA, -AB,\ldots, -FXSHRXW.
+% \item[BB] After page Z, the page
+%  \textquotedblleft numbers\textquotedblright\ continue with
+%  AA, BB, CC, DD,\ldots, and before A with
+%  0, -A, -B,\ldots, -Z, -AA, -BB,\ldots \\
+%  (About the limits please see |alphMult| above.)
+% \item[0] (zero) The \textsf{pagesLTS} package does nothing,
+%  thus the user is free to define the page
+%  \textquotedblleft numbers\textquotedblright\ after~Z and before~A.\\
+%  (But if the user does not do anything at all, the\\
+%  \ |LaTeX Error: Counter too large|\\
+%  will appear again.)
+% \end{description}
+%
+% \DescribeMacro{fnsymbolmult}
+% When option \texttt{fnsymbolmult=false} is \textbf{not} given
+% (i.\,e. \texttt{fnsymbolmult} or \texttt{fnsymbolmult=true}
+% or no \texttt{fnsymbolmult} option at all),
+% after 5 (\ensuremath  {\mathparagraph }) the page
+% \textquotedblleft number\textquotedblright\ is continued with
+% the doubled \textquotedblleft number\textquotedblright\ of the
+% first, second, third,\ldots\ page (\ensuremath  {**},
+% \ensuremath  {\dagger \dagger }, \ensuremath  {\ddagger \ddagger },
+% \ensuremath  {\mathsection \mathsection },
+% \ensuremath  {\mathparagraph \mathparagraph }),
+% and after the tenth page the
+% \textquotedblleft number\textquotedblright\ is tripled
+% (\ensuremath  {***}, \ensuremath  {\dagger \dagger \dagger },\ldots).
+% Compile the \textsf{pagesLTS-example.tex} with \pdfLaTeX\ and
+% see the resulting pdf file.\\
+% Before \ensuremath  {*} (page~1) the page
+% \textquotedblleft numbers\textquotedblright\ are continued with
+% 0, \ensuremath  {- * }, \ensuremath  {- \dagger },\ldots,
+% \ensuremath  {- \mathparagraph }, \ensuremath  {- **},
+% \ensuremath  {- \dagger \dagger },\ldots \\
+% If this is not wanted, set option \texttt{fnsymbolmult=false},
+% and \textsf{pageLTS} will do nothing and allow the user to change
+% the page \textquotedblleft number\textquotedblright . (But if the
+% user does not do anything at all, the\\
+% \ |LaTeX Error: Counter too large|\\
+% will appear again.)\\
+% While in \LaTeXe\ arabic (page) numbers are possible up~to
+% |MAX|\,$ = 2\,147\,483\,647$ (cf.~the \textsf{alphalph} package),\\
+% |\erroralphalph{\fnsymbolmult}{...}| numbers are possible up~to
+% 10\,737\,415 only. If this number is not only used internally
+% but printed, after number about 11\,705 (which is
+% 2\,341 times \ensuremath  {\mathparagraph }) the \LaTeXe\ capacity
+% is exeeded, depending on the remaining file and its use of
+% \TeX\ capacity, of course. (If you have a document with more than
+% 11\,705~pages, you might think about splitting it in volumes.
+% And page \textquotedblleft numbers\textquotedblright\ with
+% 2\,341~digits are probably not easy to grasp for the reader, too.)\\
+%
+% \subsubsection{romanMult, RomanMulti\label{sss:romanMult}}
+%
+% \DescribeMacro{romanMult}
+% \DescribeMacro{RomanMulti}
+% The options \texttt{romanMult(=true)} and \texttt{RomanMulti(=true)}
+% expand the |\roman| and |\Roman| page numbering scheme to values
+% below one ($<1$), i.\,e. 0, -i, -ii, -iii, -iv,\ldots\ and
+% 0, -I, -II, -III, -IV,\ldots, respectively.\\
+% Again the \TeX\ capacity will be exceeded before
+% \nolinebreak{$\pm$ |MAX|\,}$ = \pm 2\,147\,483\,647$, and even if
+% $1\,000\,000\,000$ is internally possible, this would print
+% $1\,000\,000$ times the letter~m, which would require either
+% very small print or quite huge paper size.\\
+%(If you have a document with so many pages, you might think
+% about splitting it in volumes. And page
+% \textquotedblleft numbers\textquotedblright\ with
+% thousands of digits are probably not easy to grasp for the reader,
+% too.)\\
+% If the expansion below $1$ is not wanted, set options
+% \texttt{romanMult=false} and/or \texttt{RomanMulti=false},
+% and \textsf{pageLTS} will do nothing and allow the user
+% to change the page \textquotedblleft number\textquotedblright .
+% (But if the user does not do anything at all, \LaTeX\ will just
+% ignore the values - not even a warning is given.)
+%
+% \subsubsection{Arabic page numbers}
+%
+% \DescribeMacro{Arabic page numbers}
+% In \LaTeXe\ arabic (page) numbers are already possible between
+% |-MAX...MAX|, where |MAX|\,$ = 2\,147\,483\,647$ (cf.~the
+% \textsf{alphalph} package), without any expansion necessary.
+% (But if you have a document with so many pages, you might think
+% about splitting it in volumes!)
+%
+% \subsection{Labels}
+%
+% \DescribeMacro{pagesLTS.0}
+% \indent At the first page a label \texttt{pagesLTS.0} is created.
+% If |\pagenumbering{...}| is used right after
+% |\begin{document}|, this is much easier for the
+% \textsf{pagesLTS} package (and chances for successful placing
+% of all labels are much higher;
+% \nolinebreak{cf.~subsubsection~\ref{sss:once}).}\\
+%
+% \DescribeMacro{LastPage}
+% \texttt{\textbackslash AtEndDocument} (see subsection~\ref{ssec:aed})
+% this package defines a label, \texttt{LastPage},
+% which the user can refer to with the \linebreak
+% |\lastpageref{LastPage}|
+% command. While |\pageref{LastPage}| is also possible
+% (especially for backward compatibility with the \textsf{LastPage}
+% package), this is discouraged, because it will not work
+% when it is used together with the \textsf{hyperref} package and
+% the \textsf{fnsymbol} page numbering scheme. (The \textsf{LastPage}
+% package did not work with this combination, too, so if you want to,
+% you can reproduce the old error -- but you do not have to do it,
+% but can use |\lastpageref{LastPage}|.)\\
+%
+% \DescribeMacro{VeryLastPage}
+% \texttt{\textbackslash AfterLastShipout} the label \texttt{VeryLastPage}
+% is defined, which the user can also refer to with the
+% |\lastpageref{VeryLastPage}| command.
+% Depending on usage of \texttt{\textbackslash AtEndDocument}
+% by other packages, \texttt{LastPage} might not point to the very last
+% page, but |\lastpageref{VeryLastPage}| should do this
+% (cf.~subsection~\ref{ssec:aed}).\\
+%
+% \DescribeMacro{LastPages}
+% \DescribeMacro{page number}
+% \DescribeMacro{number of pages}
+% When more than one page numbering scheme is used,
+% neither \texttt{LastPage} nor \texttt{VeryLastPage} give
+% the total \textbf{number} of pages.
+% For example, for a document with VI+36 pages, both give
+% \textquotedblleft 36\textquotedblright as reference to the last page.
+% While this is correct, the total number of pages is 42, and this is
+% given by the reference to \texttt{LastPage\underline{s}}:
+% \nolinebreak{|\lastpageref{LastPage|\underline{|s|}|}|} (note the
+% \textquotedblleft s\textquotedblright\ at the end). When the
+% page number was manipulated by |\addtocounter{page}{...}|
+% or |\setcounter{page}{...}|, \texttt{LastPages} ignores this.
+% (At a page numbering change the page is reset to one
+% (without option |pagecontinue|). This is done by
+% |\setcounter{page}{1}|, thus this is ignored, too.)\\
+% |\pageref{totpages}| of the \textsf{totpages} package is
+% similar to |\lastpageref{LastPages}|, but while
+% the target for |\pageref{totpages}| is placed |\AtEndDocument|,
+% the target for
+% |\lastpageref{LastPages}| is placed |\AfterLastShipout|,
+% therefore |\lastpageref{LastPages}| is safer to really
+% get the total page number.\\
+%
+% \pagebreak
+%
+% \DescribeMacro{\theCurrentPage}
+% |\theCurrentPage| gives the current total/absolute page,
+% in contrast to
+% |\thepage|, which gives only the page
+% \textit{name} in the current page numbering scheme. For example,
+% when there are Roman VII pages in the frontmatter and afterwards
+% in the mainmatter you are at arabic page 9, then |\theCurrentPage|
+% is 16, whereas |\thepage| is 9. When the page
+% \textquotedblleft number\textquotedblright\ (name) is manipulated
+% by |\addtocounter{page}{...}| or |\setcounter{page}{...}|,
+% |\theCurrentPage|
+% \nolinebreak{ignores} this. Because \texttt{CurrentPage}
+% is a normal counter, you can also say e.\,g.~|\Roman{CurrentPage}|
+% to get the value in Roman page numbering
+% scheme (e.\,g.~VIII for 8).\\
+%
+% \phantomsection
+% \label{CurrentPageLocal}
+% \DescribeMacro{\theCurrentPageLocal}
+% |\theCurrentPageLocal| gives the current (arabic) number of
+% pages in the current page numbering scheme. |\thepage| and
+% |\theCurrentPageLocal| are different e.\,g. when
+% |\addtocounter{page}{...}| or |\setcounter{page}{...}| were used.\\
+% |\theCurrentPageLocal| can be printed in other formats, e.\,g.
+% |\roman{pagesLTS.current.local.roman}|, but probably it only makes
+% sense if page numbering scheme and format are the same, e.\,g.
+% |\Roman{pagesLTS.current.local.Roman}| or\\
+% |\Alph{pagesLTS.current.local.Alph}|.\\
+% \texttt{\textbackslash arabic\{pagesLTS.current.local.\ldots \}}
+% probably make sense even when combined with another page
+% numbering scheme. And this is exactly what
+% |\theCurrentPageLocal| does:\\
+% |\def\theCurrentPageLocal{\arabic{pagesLTS.current.local.\pagesLTS@pnc}}|.\\
+%
+% \DescribeMacro{pagesLTS. page numbering scheme . number }
+% If you want to refer to the last page of the first,
+% second,\ldots\ use of a page numbering scheme, you can refer to \linebreak
+% |pagesLTS.<page numbering scheme>.<number>|, e.\,g.
+% |\lastpageref{pagesLTS.Roman.1}|, where |<number>| is the occurrence
+% of the page numbering scheme. For details please see
+% page~\pageref{pagesLTS.pnscheme.nr}.\\
+% \bigskip
+%
+% \DescribeMacro{\lastpageref}
+% For pages with the \texttt{fnsymbol} page numbering scheme,
+% |\lastpageref{...}| \nolinebreak{instead} of |\pageref{...}|
+% \textit{must} be used. This is required for pages some\-where
+% inside of the document as well as the (very) last page(s).
+% Because |\lastpageref{...}| is a synonym for |\pageref{...}|,
+% where no \textsf{fnsymbol} page numbering scheme is used,
+% it is save(r) to use it for all references to labels provided
+% by the \textsf{pagesLTS} package.
+%
+% \subsection[\texttt{\textbackslash pagenumbering\{\ldots \}}]{\DescribeMacro{\pagenumbering}\texttt{\textbackslash pagenumbering\{\ldots \}}}
+%
+% \subsubsection{If \texttt{\textbackslash pagenumbering\{\ldots \}} is \textbf{not} used\label{sss:nopnc}}
+%
+% \indent When the \textsf{pagesLTS} package is used, but |\pagenumbering{...}|
+% (with an argument like arabic, roman, Roman, fnsymbol, alph, or Alph)
+% is not used, there should be no problem, except that you might need
+% more~(!) compiler runs to get all references right, and some references
+% might even be missing (see below). The \textsf{pagesLTS}
+% package tries to determine the page numbering scheme at the first
+% shipout, but success is not guaranteed. Thus please use |\pagenumbering{...}|
+% at the beginning of your document!\\
+% \indent Without |\pagenumbering{<something>}| (|<something>| e.\,g. = arabic)
+% at the beginning of the document, the page numbers might be given in
+% arabic \textit{by} (class) \textit{default}, but the \textsf{pagesLTS}
+% package does not know about this without |\pagenumbering{arabic}|.~--\\
+% \indent The label \texttt{pagesLTS.0} is created at the first
+% page even if no |\pagenumbering{...}| command is given.
+% Maybe have a look at the \xfile{.aux} file after compiling your
+% document to detect further labels (of other packages, too).\\
+%
+% \pagebreak
+%
+% \subsubsection{If \texttt{\textbackslash pagenumbering\{\ldots \}} is used once\label{sss:once}}
+%
+% \DescribeMacro{pagesLTS.0}
+% At the first page a label \texttt{pagesLTS.0} is created.
+% If |\pagenumbering{...}| is used right after
+% |\begin{document}|, this is much easier for the
+% \textsf{pagesLTS} package (and chances for successful placing
+% of all labels are much higher).
+%
+% \subsubsection{If \texttt{\textbackslash pagenumbering\{\ldots \}} is used more than once}
+%
+% \indent Everything from the preceding subsubsections applies and additionally
+% the following:\\
+% \indent When different page numbering schemes are used, e.\,g.
+% Roman numbers for the frontmatter and arabic numbers for the
+% mainmatter, please use
+% |\pagenumbering{...}| for each of them!
+% Even if you do this, the reference to neither the label \texttt{LastPage}
+% nor the label \texttt{VeryLastPage} gives the \textbf{total}
+% number of pages, but only the number of pages of the last used page
+% numbering scheme (which could be exactly what you want, e.\,g. if
+% you want to refer to the last page itself and do not want to
+% give the total number of pages).\\
+% \DescribeMacro{LastPages}
+% \indent For remediation the label
+% \nolinebreak{\texttt{LastPage}\textbf{\underline{s}}}
+% (with \textquotedblleft s\textquotedblright at its end) is
+% introduced. Please then refer to this label by
+% |\lastpageref{LastPages}| instead of \texttt{LastPage} or
+% \texttt{VeryLastPage}.\\
+%
+% \DescribeMacro{pagesLTS.arabic}
+% \DescribeMacro{pagesLTS.roman}
+% \DescribeMacro{pagesLTS.Roman}
+% \DescribeMacro{pagesLTS.alph}
+% \DescribeMacro{pagesLTS.Alph}
+% \DescribeMacro{pagesLTS.fnsymbol}
+% Additionally, at the last page of each page numbering
+% scheme a label \texttt{pagesLTS.<numbering scheme>} is
+% placed, where \texttt{<numbering scheme>} is e.\,g.\
+% arabic, roman, Roman, alph, Alph,\ldots .\\
+% For the \textbf{fnsymbol} page numbering scheme
+% |\lastpageref{pagesLTS.fnsymbol}| is needed instead of
+% |\pageref{pagesLTS.fnsymbol}|. You can and should use
+% |\lastpageref{...}| also for the other page numbering schemes.\\
+%
+% \bigskip
+%
+% While at the time of the last revision of the \textsf{pagesLTS} package
+% no other page numbering schemes were known to the maintainer,
+% this package in principle works with every scheme which is
+% recognized by the original |\pagenumbering| command.
+% But the \textsf{hyperref} package only then works with
+% crazy page names, if the references to those pages are given in a certain way,
+% thus the combination of a new page numbering scheme, the \textsf{hyperref}
+% and the \textsf{pagesLTS} package might not work.~--
+% The \textsf{pagesLTS} package by itself also works with schemes,
+% which the original |\pagenumbering{...}| does not recognize, but because
+% the original |\pagenumbering{...}| is called by the \textsf{pagesLTS}
+% package, this might cause an error, see subsection~\ref{sec:unknown}!
+% (And if the number format is unknown to \LaTeX, the pages will have
+% no number, and therefore cannot be referenced. You might be able to
+% help yourself by using the \textsf{hyperref} package and
+% manually placing |\hypertarget|s and |\href|s.)
+%
+% \subsubsection{If the same \texttt{\textbackslash pagenumbering\{\ldots \}} scheme is used more than once\label{sss:twice}}
+%
+% \indent Everything from the preceding subsubsections applies and additionally
+% the following:\\
+% \DescribeMacro{pagecontinue}
+% \indent If the same page numbering scheme is used twice (or even more often)
+% in one document (e.\,g. in the frontmatter Roman: I--V, in the
+% mainmatter arabic: 1--20, and in the backmatter again Roman: VI--X),
+% the second time it is used, the page numbering is either continued (option
+% \texttt{pagecontinue} or \texttt{pagecontinue=true} or no option
+% \texttt{pagecontinue}; the default) or reset to one (option
+% \texttt{pagecontinue=false}). It is even possible to use
+% a~page numbering scheme more than twice.\\
+%
+% \pagebreak
+%
+% \phantomsection
+% \label{pagesLTS.pnscheme.nr}
+% \DescribeMacro{pagesLTS. page numbering scheme . number }
+% If you want to refer to the last page of the first,
+% second,\ldots\ use of a page numbering scheme, page~V in the
+% example above, you can refer to
+% |pagesLTS.<page numbering scheme>.<number>|, e.\,g.
+% |\lastpageref{pagesLTS.Roman.1}|, where |<number>| is the occurrence
+% of the page numbering scheme.\\
+%
+% If you want to refer to the first page of a page numbering scheme,
+% just place a label there, e.\,g.\\
+% \indent |\pagenumbering{Roman}| \\
+% \indent |\section{Section title\label{RomanSection}}| \\
+% (You know where you use |\pagenumbering{...}| and this is the
+%  \textsf{pagesLTS} package, not the \textsf{firstpage} one).\\
+% When you want to give the number of pages of each
+% \textquotedblleft sector\textquotedblright\ of the page numbering
+% scheme, you can use\\
+% \DescribeMacro{pagesLTS. page numbering scheme . number .local.cnt}
+% |\lastpages{<page numbering scheme>}{<number>}|, \\
+% where |<page numbering scheme>| is e.\,g. Roman, arabic,\ldots\ and
+% |<number>| the \textquotedblleft sector\textquotedblright\ number,
+% e.\,g.~|\lastpages{Roman}{2}|.\\
+% (Internally, the counter has the format
+% |pagesLTS.<page numbering scheme>.<number>.local.cnt|.)
+%
+% \noindent If you used the page numbering scheme Roman for three times,
+% you could say
+% \begin{verbatim}
+% Last Roman page (pagesLTS.Roman): \lastpageref{pagesLTS.Roman}\\
+% There are \lastpageref{pagesLTS.Roman.local}~pages with Roman numbers:\\
+% \lastpages{Roman}{1}~pages in the first Roman sector
+% (\pageref{Roman} -- \lastpageref{pagesLTS.Roman.1}),\\
+% \lastpages{Roman}{2}~pages in the second Roman sector
+% (\pageref{Roman2} -- \lastpageref{pagesLTS.Roman.2}), and\\
+% \lastpages{Roman}{3}~pages in the third Roman sector
+% (\pageref{Roman3} -- \lastpageref{pagesLTS.Roman.3}.\\
+% \end{verbatim}
+% to get
+% \begin{quote}
+% Last Roman page (pagesLTS.Roman): VIII\\
+% There are 8 pages with Roman numbers:\\
+% 3 pages in the first Roman sector (I -- III),\\
+% 4 pages in the second Roman sector (IV -- VII), and\\
+% 3 pages in the third Roman sector (VIII -- X).\\
+% \end{quote}
+% (see e.\,g. the compiled \textsf{pagesLTS-example} file).\\
+%
+% If you want to continue one page numbering scheme, but later on
+% (third use of it, or for another page numbering scheme) want to
+% reset the page number, just say |\setcounter{page}{1}| there.\\
+%
+% \pagebreak
+%
+% \noindent In your document the code
+% \begin{verbatim}
+% \makeatletter
+% \renewcommand{\@evenfoot}%
+%  {\normalsize\slshape DRAFT \today\hfil \upshape page {\thepage} (\theCurrentPage) of\ %
+%   \lastpageref{pagesLTS.Roman} + \lastpageref{pagesLTS.arabic}\ = \lastpageref{LastPages} pages%
+%  }
+% \renewcommand{\@oddfoot}{\@evenfoot}
+% \makeatother
+%\end{verbatim}
+% \noindent creates footers like\\
+%
+% \textquotedblleft\mbox{\textsl{DRAFT \today}\hspace{1cm}page V (5) of VII + 35 = 42 pages}\textquotedblright\\
+%
+% \noindent or\\
+%
+% \textquotedblleft\mbox{\textsl{DRAFT \today}\hspace{1cm}page 10 (17) of VII + 35 = 42 pages}\textquotedblright\\
+%
+% \noindent in the compiled document (cf.~the \texttt{pagesLTS-example} file).
+%
+% \noindent Code like
+% \begin{verbatim}
+%  This book has \lastpageref{pagesLTS.Roman}+\lastpageref{pagesLTS.arabic} pages (\lastpageref{LastPages} pages in total).
+% \end{verbatim}
+% \noindent produces output like
+% \begin{quote}
+% This book has X+85 pages (95 pages in total).
+% \end{quote}
+% \noindent (when using the \textsf{hyperref} package,
+% the references are even hyperlinked).\\
+%
+% If |\addtocounter{page}{...}| or |\setcounter{page}{...}| have been used,
+% the local version of \texttt{CurrentPage} can be used, |\theCurrentPageLocal|,
+% see subsection~\ref{CurrentPageLocal}.\\
+%
+% \subsection{\textsf{papermas}(s) package\label{ss:papermas}}
+% There is a kind of an add-on to this package, the \textsf{papermas}
+% package, which can be used to compute the number of sheets of paper
+% needed to print a document (you can print more than one page of a
+% document on one sheet of paper) as well as the approximate mass
+% of the printout. Please see the \ref{ss:Downloads} subsection.
+%
+% \newpage
+%
+% \section{A few warnings\label{sec:warn}}
+%
+% \subsection{\texttt{\textbackslash AtEndDocument}\label{ssec:aed}}
+%
+% \indent The output of a \LaTeXe\ run is not independent of the order
+% in which packages are loaded. It is often the case that the same
+% formats for which one must put tables and figure at the end,
+% are the ones in which endnotes are also required.
+% If one wants to use |\AtEndDocument| here as well (as done for
+% |\lastpageref{LastPage}|), then it is easy to get to three separate
+% uses of |\AtEndDocument| (assuming one uses this for the endnotes
+% as well). Clearly it is not safe for any package writer or user
+% to assume that no material will follow what they put into
+% |\AtEndDocument|. Therefore a message, which begins with
+% \texttt{AED}, is included in every usage of |\AtEndDocument|,
+% and it is tried to minimize any side effects the usage may have.\\
+%
+% As now Heiko Oberdiek's \texttt{atveryend} package is used,
+% the references
+% |\lastpageref{VeryLastPage}| and |\lastpageref{LastPages}|
+% should work all right. About how to get the \texttt{atveryend} package,
+% please see subsection~\ref{ss:Downloads}.
+%
+% \subsection{Interaction with very old versions of the \textsf{endfloat} package\label{sec:endfloat}}
+%
+% \indent The very old version~2.0 (and earlier) of the \textsf{endfloat}
+% package actually redefined the |\enddocument| command,
+% and so interferred drastically with the \LaTeXe\ commands which
+% make use of |\AtEndDocument|. Newer versions of \textsf{endfloat}
+% exists (at the time of writing this documentation: v2.4i as of 1995/10/11)
+% in modern documentation form, which should be available from
+% the same source where you received this file, see subsection~\ref{ss:Downloads}.\\
+% A note is placed in the style file at the |\RequirePackage| section,
+% and later it is even checked whether a (very) old \textsf{endfloat}
+% package is in use. If it is, a warning or even an error message
+% is given, depending on \textsf{endfloat} version.
+% This assumes, that the old versions of endfloat at least gave
+% a version date, of course.\\
+% If you want your \texttt{LastPage} to label the last page of
+% these end floats, you need to load \textsf{pagesLTS} after
+% loading \textsf{endfloat}, or to use \texttt{VeryLastPage} instead.
+% If, on the other hand, you \textit{want}\ \texttt{LastPage} to refer
+% to the (not so) last page, exclusive of the the floats at the end,
+% then load in the reverse order. Independent from the order of
+% \textsf{pagesLTS} and \textsf{endfloat}, you will still need the
+% modified\footnote{The \textquotedblleft new\textquotedblright\ version
+% is nearly 15~years old, so it might be time to update to this
+% version,
+% if you did not do it already.} version of \textsf{endfloat}.\\
+% Using the
+% \nolinebreak{\texttt{LastPage}\textbf{\underline{s}}\ (\textit{s}!)}\ label
+% should get you to the last page in all cases: |\lastpageref{LastPages}|.\\
+%
+% Other \LaTeX209\ (!) packages also seem to like to redefine
+% |\enddocument|. In addition to the old \textsf{endfloat},
+% \textsf{harvard} comes to mind. All of these will need to be
+% modified swiftly. \textbf{If possible, update to \LaTeXe!}
+%
+% \subsection{\textsf{lastpage} package\label{ssec:lastpage}}
+%
+% This package first started as a revision of the \textsf{lastpage}
+% package of Jeffrey P. Goldberg (jeffrey+news at goldmark dot org),
+% but it became obviouse that a replacement was needed. For backward
+% compatibility, a label named |LastPage| is provided.
+% Thus |\usepackage{lastpage}| can be replaced by\\
+% |\usepackage[pagecontinue=false,alphMult=0,AlphMulti=0,fnsymbolmult=false,romanMult=false,RomanMulti=false]{pagesLTS}|,\\
+% if the behaviour of the \textsf{lastpage} package should be simulated.
+% Using the \textsf{lastpage} before the \textsf{pagesLTS} before the
+% \textsf{hyperref} [2010/04/17, v6.80x; probably an update will be issued]
+% package results in multiply definitions of the |LastPage| label.
+%
+% \subsection{Using an unknown page numbering scheme\label{sec:unknown}}
+%
+% \indent I do not know whether \LaTeXe\ can handle another page numbering
+% scheme (e.\,g.~hebraic), but if you want to use it, this should be
+% no problem for the \textsf{pagesLTS} package. But the original
+% |\pagenumbering{...}| as well as the \textsf{hyperref} package
+% (if~used) might want to vote against it, especially when used
+% together with the \textsf{pagesLTS} package.
+% Especially especially (\textit{sic}!) if the last page uses
+% this new page numbering scheme, you should check everything
+% double (at least).\\
+% (And if the number format is unknown to \LaTeX, the pages will have
+% no number, and therefore cannot be referenced. You might be able to
+% help yourself by using the \textsf{hyperref} package and
+% manually placing |\hypertarget|s and |\href|s.)
+%
+% \subsection{Page counter overflow\label{ss:overflow}}
+%
+% \indent Without the use of the \textsf{alphalph} package, the\\
+% \textquotedblleft ranges of supported counter values are more or less
+% restricted. Only \cs{arabic} can be used with any counter
+% value \TeX\ supports.
+% \begin{quote}
+% \catcode`\|=12 %
+% \begin{tabular}{@{}l|l|l|l@{}}
+% Presentation & Supported & Ignored & Error message\\
+% command      & domain    & values  & `Counter too large'\\
+% \hline
+% \cs{arabic}
+%   & \ttfamily -MAX..MAX & &\\
+% \cs{roman}, \cs{Roman}
+%   & \ttfamily 1..MAX & \ttfamily -MAX..0 &\\
+% \cs{alph}, \cs{Alph}
+%   & \ttfamily 1..26 & 0 & \ttfamily -MAX..-1, 27..MAX\\
+% \cs{fnsymbol}
+%   & \ttfamily 1..9 & 0 & \ttfamily -MAX..-1, 10..MAX\\
+% \hline
+% \end{tabular}\\[1ex]
+% \texttt{MAX} = \texttt{2147483647}
+% \end{quote}
+% \textquotedblright\ (Heiko Oberdiek:
+% The \textsf{alphalph} package, 2010/04/18, v2.3, first table, p.~2).\\
+% Please see subsubsections~\ref{sss:alphalph} and
+% \ref{sss:romanMult} for instructions how to overcome
+% these limitations.
+%
+% \newpage
+%
+% \subsection{Using the \textsf{fnsymbol} page numbering scheme\label{ss:fnsymbol}}
+%
+% \indent Using the \texttt{fnsymbol} page numbering scheme can result in
+% problems -- big ones!\\
+% \textbf{When using this page numbering scheme,%
+% it is very important to use}\ |\lastpageref{...}| \textbf{instead of}\ %
+% |\pageref{...}| \textbf{for any link to any label provided by the%
+% \textsf{pagesLTS} package.}\\
+% While the \textsf{pagesLTS} package tries really very hard
+% to circumvent any problem, other packages might skrew up --
+% and quite totally for that. So, you have been warned!\\
+%
+% \begin{description}
+% \item[-] There can be a counter overflow, see preceding subsection~\ref{ss:overflow}.
+%
+% \item[-] Adobe Acrobat Reader 9.3.1 does not show the correct page names
+% for all pages with \texttt{fnsymbol} page numbering scheme:
+%
+% \begin{center}
+% \begin{tabular}{c|c|c|c}
+% page number & page name         & shown by the Reader & with \textsf{alphalph} package and with              \\
+%      &                                     &          & \textsf{pagesLTS} package with |fnsymbolmult| option \\ \hline
+% $-1$ & \texttt{LaTeX Error}                &          & \ensuremath  {- *}                                   \\
+%  $0$ & (ignored by \LaTeX)                 &          & 0                                                    \\
+%  $1$ & \ensuremath  {*}                    & *        & \ensuremath  {*}                                     \\
+%  $2$ & \ensuremath  {\dagger }             &          & \ensuremath  {\dagger }                              \\
+%  $3$ & \ensuremath  {\ddagger }            &          & \ensuremath  {\ddagger }                             \\
+%  $4$ & \ensuremath  {\mathsection }        &          & \ensuremath  {\mathsection }                         \\
+%  $5$ & \ensuremath  {\mathparagraph }      &          & \ensuremath  {\mathparagraph }                       \\
+%  $6$ & \ensuremath  {\delimiter "026B30D } & "026B30D & \ensuremath  {**}                                    \\
+%  $7$ & \ensuremath  {**}                   & **       & \ensuremath  {\dagger \dagger }                      \\
+%  $8$ & \ensuremath  {\dagger \dagger }     &          & \ensuremath  {\ddagger \ddagger }                    \\
+%  $9$ & \ensuremath  {\ddagger \ddagger }   &          & \ensuremath  {\mathsection \mathsection }            \\
+% $10$ & \texttt{LaTeX Error}                &          & \ensuremath  {\mathparagraph \mathparagraph }        \\
+% $11$ & \texttt{LaTeX Error}                &          & \ensuremath  {***}                                   \\
+% $12$ & \texttt{LaTeX Error}                &          & \ensuremath  {\dagger \dagger \dagger }              \\
+% \end{tabular}
+% \end{center}
+%
+% \noindent and so on, while at least the (\ldots\ of \ldots )
+% part of the page number is displayed correctly (see
+% page~\pageref{logical page numbers}, tip about logical page numbers).
+% When the \textsf{alphalph} package and the \textsf{pagesLTS} package with
+% |fnsymbolmult| option are used, page names like
+% \ensuremath  {- *}, 0, \ensuremath  {*}, \ensuremath  {**} are
+% also presented correctly by the Reader.
+% \end{description}
+%
+% \newpage
+%
+% \section{Alternatives\label{sec:Alternatives}}
+%
+% There are similar packages, which do (or do not) similar
+% things. As I neither know what exactly you want to accomplish
+% when using this package (e.\,g.~page number vs. page name,
+% hyperlinks or not), nor what resources you have (e.\,g.~\eTeX),
+% here is a list of some possible alternatives:\\
+%
+% \DescribeMacro{lastpage209.sty}
+% \begin{description}
+% \item[-] If \LaTeX2.09\ is still used, and if you are unable
+% to switch to \LaTeXe, the \LaTeX2.09\ compatible
+% \textsf{lastpage209.sty} of Jeffrey P. Goldberg
+% (jeffrey+news at goldmark dot org) can be used,
+% which is defined as follows:\\
+% (You can get it also by un-commenting the\\
+% \texttt{\%\% \textbackslash file\{lastpage209.sty\}\{\textbackslash from\{pagesLTS.dtx\}\{lastpage209\}\}\% }\\
+% line in the \xfile{pagesLTS.ins} file and running\\
+% |tex pagesLTS.ins|.)
+%
+%    \begin{macrocode}
+%<*lastpage209>
+ % FOR LaTeX 2.09 ONLY - FOR LaTeX 2e USE lastpage.sty OR pagesLTS.sty!
+ % This is lastpage209.sty by Jeffrey P. Goldberg (jeffrey+news at goldmark dot org).
+\let\origenddocument=\enddocument
+\def\enddocument{\clearpage
+  {\addtocounter{page}{-1}
+   \immediate\write\@mainaux
+    {\string\newlabel{LastPage}{{}{\thepage}}}}
+  \addtocounter{page}{+1}
+    \origenddocument%
+  }
+%</lastpage209>
+%    \end{macrocode}
+%
+% (after Piet van Oostrum: Page layout in \LaTeX, March~2, 2004,
+% section~16; fancyhdr.pdf). Because |\enddocument| is redefined,
+% similar problems as with the old version of the \textsf{endfloat}
+% package (see subsection~\ref{sec:endfloat}) will arise.\\
+% The \textsf{lastpage209} style only provides the |LastPage|
+% label - nothing else!\\
+% \textbf{If possible, update to \LaTeXe!}
+% \end{description}
+%
+% \DescribeMacro{LastPage}
+% \begin{description}
+% \item[-] The \textsf{LastPage} package also provides the
+%  \texttt{LastPage} label (but not \texttt{VeryLastPage} or
+%  \texttt{LastPages}). If you only want this and have a very
+%  limited amount of \TeX\ resources, you might want to use that
+%  package instead.
+% \end{description}
+%
+% \DescribeMacro{totpages}
+% \begin{description}
+% \item[-] The \textsf{totpages} package provides a
+%  \texttt{totpages} label similar to \texttt{LastPages},
+%  but |\AtEndDocument| instead of |\AfterLastShipout|. Therefore
+%  you should stay with \textsf{pagesLTS}. The \textsf{totpages}
+%  package additionally computes the number of paper sheets needed to
+%  (double) print the document (with one, two, three,\ldots\ pages
+%  on one sheet of paper).
+% \end{description}
+%
+% \pagebreak
+%
+% \DescribeMacro{nofm.sty}
+% \begin{description}
+% \item[-] \textquotedblleft There is a package \textsf{nofm.sty}
+%  available, but some versions of it are defective, and most
+%  don't work with \textsf{fancyhdr} because they take over the
+%  complete page layout.\textquotedblright (Piet van Oostrum:
+%  Page layout in \LaTeX, March~2, 2004, section~16; fancyhdr.pdf)\\
+%  \textsf{nofm} as of 1991/02/25 (without version number), available at\\
+%  \url{ftp://tug.ctan.org/pub/tex-archive/obsolete/macros/latex209/contrib/misc/nofm.sty},\\
+%  does not work with e.\,g. \textsf{hyperref}, redefines |\enddocument|
+%  as well as |\@oddhead|, |\@evenhead|, |\@oddfoot|, and |\@evenfoot|.\\
+%  If you know the (\CTAN{}) location of a \textbf{working}~(!) version,
+%  please send me an e-mail, thanks!
+% \end{description}
+%
+% \DescribeMacro{count1to}
+% \begin{description}
+% \item[-] You may want to have a look at the \textsf{count1to} package.
+% \end{description}
+%
+% \DescribeMacro{zref}
+% \begin{description}
+% \item[-] The \textsf{zref} package of Heiko Oberdiek requires
+%  \eTeX. \textsf{pagesLTS} does not require \eTeX, but if you
+%  already have \eTeX, you may have a look at the extensive
+%  \textsf{zref} package, whether it suits your needs better
+%  (or additionally or whatsoever).
+% \end{description}
+%
+% \bigskip
+%
+% \noindent (You programmed or found another alternative,
+%  which is available at \CTAN{}?\\
+%  OK, send an e-mail to me with the name, location at \CTAN{},
+%  and a short notice, and I will probably include it in
+%  the list above.)\\
+%
+% \smallskip
+%
+% \noindent About how to get those packages, please see subsection~\ref{ss:Downloads}.
+%
+% \newpage
+%
+% \section{Example}
+%
+%    \begin{macrocode}
+%<*example>
+\documentclass[british]{article}
+%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%
+\usepackage{alphalph}[2010/04/18]% v2.3
+\usepackage{lipsum}[2005/01/26]% v1.0
+\usepackage[draft]{showkeys}[2007/08/07]% v3.15
+%%      Use final instead of draft to hide the keys. %%
+\usepackage{hyperref}[2010/05/13]% v6.81e
+\hypersetup{%
+ extension=pdf,%
+ plainpages=false,%
+ pdfpagelabels=true,%
+ hyperindex=false,%
+ pdflang={en},%
+ pdftitle={pagesLTS package example},%
+ pdfauthor={Hans-Martin Muench},%
+ pdfsubject={Example for the pagesLTS package},%
+ pdfkeywords={LaTeX, pagesLTS, Hans-Martin Muench},%
+ pdfview=Fit,%
+ pdfstartview=Fit,%
+ pdfpagelayout=SinglePage,%
+ bookmarksopen=true%
+}
+\usepackage[pagecontinue=true,alphMult=ab,AlphMulti=AB,fnsymbolmult=true,romanMult=true,RomanMulti=true]{pagesLTS}[2010/06/03]% v1.1b
+%% These are the default options. %%
+\makeatletter
+  \renewcommand{\@evenfoot}%
+   {Page \thepage\ (\theCurrentPage; local: \theCurrentPageLocal) of %
+    \lastpageref{pagesLTS.roman}(\lastpageref{pagesLTS.roman.local}) + %
+    \lastpageref{pagesLTS.Roman}(\lastpageref{pagesLTS.Roman.local}) + %
+    \lastpageref{pagesLTS.arabic}(\lastpageref{pagesLTS.arabic.local}) + %
+    \lastpageref{pagesLTS.fnsymbol}(\lastpageref{pagesLTS.fnsymbol.local}) + %
+    \lastpageref{pagesLTS.alph}(\lastpageref{pagesLTS.alph.local}) + %
+    \lastpageref{pagesLTS.Alph}(\lastpageref{pagesLTS.Alph.local}) = %
+    \lastpageref{LastPages} pages.%
+   }
+  \renewcommand{\@oddfoot}{\@evenfoot}
+  \newcounter{pagesLTS.exampleArabic}
+  \setcounter{pagesLTS.exampleArabic}{3}
+  \newcounter{pagesLTS.examplealph}
+  \setcounter{pagesLTS.examplealph}{23}
+%% Code from tcilatex.tex, Macros for Scientific Word and Scientific WorkPlace 5.5 <06 Oct 2005> %%
+%% Copyright (C) 2005 Mackichan Software, Inc.                                                   %%
+%% That macro file is NOT proprietary and may be freely copied and distributed.                  %%
+  \def\unit#1{\mathord{\thinspace\rm #1}}%
+%% End of code from tcilatex.tex                                                                 %%
+\makeatother
+\listfiles
+\begin{document}
+\pagenumbering{roman}
+%% Note the first \pagenumbering immediately behind \begin{document}. %%
+
+%%\addtocounter{page}{-2} %%
+
+\section*{Example for pagesLTS}
+\addcontentsline{toc}{section}{Example for pagesLTS}
+\markboth{Example for pagesLTS}{Example for pagesLTS}
+
+This example demonstrates the most common uses of package\\
+\textsf{pagesLTS}, v1.1b as of 2010/06/03 (HMM).\\
+The used options were \texttt{pagecontinue=true},
+\texttt{alphMult=ab}, \texttt{AlphMulti=AB}, \linebreak
+\texttt{fnsymbolmult=true},
+\texttt{romanMult=true}, and \texttt{RomanMulti=true}
+(the default ones).\\
+For more details please see the documentation!\\
+
+\label{keys} To hide the \pageref{keys}{\qquad } use option
+\texttt{final} instead of \texttt{draft} with the \textsf{showkeys}
+package (or remove the package call from the preamble of
+this document).\\
+
+\textbf{Trademarks} appear throughout this example without any
+trademark symbol; they are the property of their respective
+trademark owner. There is no intention of infringement; the
+usage is to the benefit of the trademark owner.\\
+
+\textbf{Tip}: Use \textit{logical page numbers} for
+the display of the pdf!\\
+(In Adobe Reader 9.3.1: \underline{E}dit $>$
+Prefere\underline{n}ces (Ctrl+k) $>$ Page Display $>$
+Page Content and Information $>$ Use logical page
+\nolinebreak{\underline{n}umbers.)}\\
+
+You want negative page numbers? Not only arabic, but even roman,
+Roman, alph, Alph or fnsymbol ones? No problem, e.\,g. just give a\\
+\texttt{\textbackslash addtocounter\{page\}\{- \textit{some number}\}}
+in the source code of this example file (or uncomment the prepared
+line)!
+
+\bigskip
+
+Save per page about $200\unit{ml}$ water, $2\unit{g}$ CO$_{2}$
+and $2\unit{g}$ wood:\\
+Therefore please print only if this is really necessary.
+
+\newpage
+
+\tableofcontents
+
+\newpage
+
+\pagenumbering{roman}
+ % in case the page numbering is changed before,
+ % otherwise pagesLTS.current.local.roman on this page
+ % would be undefined
+
+\section{roman}
+
+\noindent (\texttt{roman} page numbering was started before,
+becaue the page numbering scheme was needed to start at
+the first page, of course.)\\
+
+\noindent First page (\texttt{\textbackslash lastpageref\{pagesLTS.0\}}):
+\lastpageref{pagesLTS.0}\\
+
+\noindent The page (\texttt{\textbackslash thepage}): \thepage \\
+
+\noindent Current page (\texttt{\textbackslash theCurrentPage}),
+i.\,e. counted continuously from the first page): \theCurrentPage \\
+You can get this also in other formats:
+\roman{CurrentPage}, \Roman{CurrentPage}, \arabic{CurrentPage},
+\fnsymbol{CurrentPage}, \alph{CurrentPage}, \Alph{CurrentPage}.
+
+\noindent CurrentPageLocal (\texttt{\textbackslash theCurrentPageLocal}),
+i.\,e. counted continuously from the first page of the
+current page numbering sheme): \theCurrentPageLocal \\
+You can get also this in other formats, too:
+\roman{pagesLTS.current.local.roman}, \Roman{pagesLTS.current.local.roman},
+\arabic{pagesLTS.current.local.roman}, \fnsymbol{pagesLTS.current.local.roman},
+\alph{pagesLTS.current.local.roman}, \Alph{pagesLTS.current.local.roman},
+but probably it only makes sense if page numbering scheme and format are
+the same, e.\,g.\\
+\texttt{\textbackslash Roman\{pagesLTS.current.local.Roman\}}\\
+or \texttt{\textbackslash Alph\{pagesLTS.current.local.Alph\}}.\ %
+\texttt{\textbackslash arabic\{\ldots \}}\ could make sense
+even if combined with another page numbering scheme.
+And this is exactly what \texttt{\textbackslash theCurrentPageLocal} does:\\
+\nolinebreak{\texttt{\textbackslash def\textbackslash theCurrentPageLocal%
+\{\textbackslash arabic\{pagesLTS.current.local.\textbackslash pagesLTS@pnc\}\}}.}\\
+
+\noindent Last roman page (pagesLTS.roman): \lastpageref{pagesLTS.roman}{\hskip4em }
+(There are \lastpageref{pagesLTS.roman.local} pages with roman numbers.)\\
+
+\noindent Last Roman page (pagesLTS.Roman): \lastpageref{pagesLTS.Roman}{\hskip3em }
+(There are \lastpageref{pagesLTS.Roman.local}~pages with Roman numbers:\\
+\lastpages{Roman}{1}~pages in the first Roman sector
+(\pageref{Roman}{\hskip3em }-\lastpageref{pagesLTS.Roman.1}{\hskip3em }),\\
+\lastpages{Roman}{2}~pages in the second Roman sector
+(\pageref{Roman2}{\hskip3em }-\lastpageref{pagesLTS.Roman.2}{\hskip3em }), and\\
+\lastpages{Roman}{3}~pages in the third Roman sector
+(\pageref{Roman3}{\hskip3em }-\lastpageref{pagesLTS.Roman.3}{\hskip3em }).\\
+
+When the option \texttt{pagecontinue=false} is used with the
+\textsf{pagesLTS} package, the
+\texttt{\textbackslash lastpageref\{pagesLTS.Roman\}} will point
+to the same page as before, but this will have a lower number.\\
+The \texttt{\textbackslash lastpageref\{pagesLTS.Roman.local\}}
+will not change, because the number of pages does not change
+(only the page numbers).\\
+
+\noindent Last arabic page (pagesLTS.arabic): \lastpageref{pagesLTS.arabic}{\hskip5em }
+(There are only \lastpageref{pagesLTS.arabic.local} pages with arabic numbers,
+because an \texttt{\textbackslash addtocounter\{page\}\{\arabic{pagesLTS.exampleArabic}\}} was used.)\\
+
+\noindent Last fnsymbol page (pagesLTS.fnsymbol): \lastpageref{pagesLTS.fnsymbol} \\
+(\texttt{\textbackslash lastpageref\{pagesLTS.fnsymbol\}} -- never
+\texttt{\textbackslash pageref\{pagesLTS.fnsymbol\}}!)\\
+(There are \lastpageref{pagesLTS.fnsymbol.local} pages with fnsymbol numbers.)\\
+
+\noindent Last alph page (pagesLTS.alph): \lastpageref{pagesLTS.alph}{\hskip4em }
+(There are only \lastpageref{pagesLTS.alph.local} pages with alph numbers,
+because an \texttt{\textbackslash addtocounter\{page\}\{\arabic{pagesLTS.examplealph}\}} was used.)\\
+
+\noindent Last Alph page (pagesLTS.Alph): \lastpageref{pagesLTS.Alph}{\hskip4em }
+(There are \lastpageref{pagesLTS.Alph.local} pages with Alph numbers.)\\
+
+\noindent Last page's \textit{name} (LastPage): \lastpageref{LastPage}\\
+
+\noindent Very last page's \textit{name} (VeryLastPage): \lastpageref{VeryLastPage}\\
+(\texttt{lastpage} and \texttt{VeryLastPage} are identical, unless
+a package with output \linebreak
+\texttt{\textbackslash AtEndDocument} after the \textsf{pagesLTS} package
+was added.)\\
+
+\noindent Last page's \textit{number} (LastPages): \lastpageref{LastPages}{\hskip3em }
+(=~total number of pages)\\
+
+\lipsum[1-3]
+
+\newpage
+
+\pagenumbering{Roman}
+
+\section{Roman\label{Roman}}
+\subsection{Common Roman page numbering}
+
+\noindent First page (\texttt{\textbackslash lastpageref\{pagesLTS.0\}}):
+\lastpageref{pagesLTS.0}\\
+
+\noindent The page (\texttt{\textbackslash thepage}): \thepage \\
+
+\noindent Current page (\texttt{\textbackslash theCurrentPage}),
+i.\,e. counted continuously from the first page): \theCurrentPage \\
+
+\noindent CurrentPageLocal (\texttt{\textbackslash theCurrentPageLocal}),
+i.\,e. counted continuously from the first page of the
+current page numbering sheme): \theCurrentPageLocal \\
+
+\noindent Last roman page (pagesLTS.roman): \lastpageref{pagesLTS.roman}{\hskip4em }
+(There are \lastpageref{pagesLTS.roman.local} pages with roman numbers.)\\
+
+\noindent Last Roman page (pagesLTS.Roman): \lastpageref{pagesLTS.Roman}{\hskip3em }
+(There are \lastpageref{pagesLTS.Roman.local}~pages with Roman numbers:\\
+\lastpages{Roman}{1}~pages in the first Roman sector
+(\pageref{Roman}{\hskip3em }-\lastpageref{pagesLTS.Roman.1}{\hskip3em }),\\
+\lastpages{Roman}{2}~pages in the second Roman sector
+(\pageref{Roman2}{\hskip3em }-\lastpageref{pagesLTS.Roman.2}{\hskip3em }), and\\
+\lastpages{Roman}{3}~pages in the third Roman sector
+(\pageref{Roman3}{\hskip3em }-\lastpageref{pagesLTS.Roman.3}{\hskip3em }).\\
+
+\noindent Last arabic page (pagesLTS.arabic): \lastpageref{pagesLTS.arabic}{\hskip5em }
+(There are only \lastpageref{pagesLTS.arabic.local} pages with arabic numbers,
+because an \texttt{\textbackslash addtocounter\{page\}\{\arabic{pagesLTS.exampleArabic}\}} was used.)\\
+
+\noindent Last fnsymbol page (pagesLTS.fnsymbol): \lastpageref{pagesLTS.fnsymbol} \\
+(\texttt{\textbackslash lastpageref\{pagesLTS.fnsymbol\}} -- never
+\texttt{\textbackslash pageref\{pagesLTS.fnsymbol\}}!)\\
+(There are \lastpageref{pagesLTS.fnsymbol.local} pages with fnsymbol numbers.)\\
+
+\noindent Last alph page (pagesLTS.alph): \lastpageref{pagesLTS.alph}{\hskip4em }
+(There are only \lastpageref{pagesLTS.alph.local} pages with alph numbers,
+because an \texttt{\textbackslash addtocounter\{page\}\{\arabic{pagesLTS.examplealph}\}} was used.)\\
+
+\noindent Last Alph page (pagesLTS.Alph): \lastpageref{pagesLTS.Alph}{\hskip4em }
+(There are \lastpageref{pagesLTS.Alph.local} pages with Alph numbers.)\\
+
+\noindent Last page's \textit{name} (LastPage): \lastpageref{LastPage}\\
+
+\noindent Very last page's \textit{name} (VeryLastPage): \lastpageref{VeryLastPage}\\
+(\texttt{LastPage} and \texttt{VeryLastPage} are identical, unless
+a package with output \linebreak
+\texttt{\textbackslash AtEndDocument} after the \textsf{pagesLTS} package
+was added.)\\
+
+\noindent Last page's \textit{number} (LastPages): \lastpageref{LastPages}{\hskip3em }
+(=~total number of pages)\\
+
+\lipsum[1-4]
+
+\newpage
+
+\subsection{Last page of first Roman sector}
+\texttt{\textbackslash lastpageref\{pagesLTS.Roman\}} does \textbf{not}
+refer to this page (but there: \lastpageref{pagesLTS.Roman}),
+because the option \texttt{pagecontinue=true}
+was chosen. When a reference to this page is wanted,\\
+\texttt{\textbackslash lastpageref\{pagesLTS.Roman.1\}}
+can be used: \lastpageref{pagesLTS.Roman.1}.\\
+
+\bigskip
+There are \lastpages{Roman}{1}~pages
+(\texttt{\textbackslash lastpages\{Roman\}\{1\}})
+in this first Roman sector.\\
+The Roman page numbering scheme is continued later in
+section~\ref{Roman2})!
+
+\newpage
+
+\pagenumbering{arabic}
+
+\section{arabic}
+
+\subsection{Standard page numbering}
+
+\noindent First page (\texttt{\textbackslash lastpageref\{pagesLTS.0\}}):
+\lastpageref{pagesLTS.0}\\
+
+\noindent The page (\texttt{\textbackslash thepage}): \thepage \\
+
+\noindent Current page (\texttt{\textbackslash theCurrentPage}),
+i.\,e. counted continuously from the first page): \theCurrentPage \\
+
+\noindent CurrentPageLocal (\texttt{\textbackslash theCurrentPageLocal}),
+i.\,e. counted continuously from the first page of the
+current page numbering sheme): \theCurrentPageLocal \\
+
+\noindent Last roman page (pagesLTS.roman): \lastpageref{pagesLTS.roman}{\hskip4em }
+(There are \lastpageref{pagesLTS.roman.local} pages with roman numbers.)\\
+
+\noindent Last Roman page (pagesLTS.Roman): \lastpageref{pagesLTS.Roman}{\hskip3em }
+(There are \lastpageref{pagesLTS.Roman.local}~pages with Roman numbers:\\
+\lastpages{Roman}{1}~pages in the first Roman sector
+(\pageref{Roman}{\hskip3em }-\lastpageref{pagesLTS.Roman.1}{\hskip3em }),\\
+\lastpages{Roman}{2}~pages in the second Roman sector
+(\pageref{Roman2}{\hskip3em }-\lastpageref{pagesLTS.Roman.2}{\hskip3em }), and\\
+\lastpages{Roman}{3}~pages in the third Roman sector
+(\pageref{Roman3}{\hskip3em }-\lastpageref{pagesLTS.Roman.3}{\hskip3em }).\\
+
+\noindent Last arabic page (pagesLTS.arabic): \lastpageref{pagesLTS.arabic}{\hskip5em }
+(There are only \lastpageref{pagesLTS.arabic.local} pages with arabic numbers,
+because an \texttt{\textbackslash addtocounter\{page\}\{\arabic{pagesLTS.exampleArabic}\}} was used.)\\
+
+\noindent Last fnsymbol page (pagesLTS.fnsymbol): \lastpageref{pagesLTS.fnsymbol} \\
+(\texttt{\textbackslash lastpageref\{pagesLTS.fnsymbol\}} -- never
+\texttt{\textbackslash pageref\{pagesLTS.fnsymbol\}}!)\\
+(There are \lastpageref{pagesLTS.fnsymbol.local} pages with fnsymbol numbers.)\\
+
+\noindent Last alph page (pagesLTS.alph): \lastpageref{pagesLTS.alph}{\hskip4em }
+(There are only \lastpageref{pagesLTS.alph.local} pages with alph numbers,
+because an \texttt{\textbackslash addtocounter\{page\}\{\arabic{pagesLTS.examplealph}\}} was used.)\\
+
+\noindent Last Alph page (pagesLTS.Alph): \lastpageref{pagesLTS.Alph}{\hskip4em }
+(There are \lastpageref{pagesLTS.Alph.local} pages with Alph numbers.)\\
+
+\noindent Last page's \textit{name} (LastPage): \lastpageref{LastPage}\\
+
+\noindent Very last page's \textit{name} (VeryLastPage): \lastpageref{VeryLastPage}\\
+(\texttt{LastPage} and \texttt{VeryLastPage} are identical, unless
+a package with output \linebreak
+\texttt{\textbackslash AtEndDocument} after the \textsf{pagesLTS} package
+was added.)\\
+
+\noindent Last page's \textit{number} (LastPages): \lastpageref{LastPages}{\hskip3em }
+(=~total number of pages)\\
+
+\lipsum[1-4]
+\newpage
+
+\subsection[Empty page style]{Also an empty page style is no problem\ %
+for the current or total page count}
+
+\bigskip
+
+\thispagestyle{empty}
+
+\noindent First page (\texttt{\textbackslash lastpageref\{pagesLTS.0\}}):
+\lastpageref{pagesLTS.0}\\
+
+\noindent The page (\texttt{\textbackslash thepage}): \thepage \\
+
+\noindent Current page (\texttt{\textbackslash theCurrentPage}),
+i.\,e. counted continuously from the first page): \theCurrentPage \\
+
+\noindent CurrentPageLocal (\texttt{\textbackslash theCurrentPageLocal}),
+i.\,e. counted continuously from the first page of the
+current page numbering sheme): \theCurrentPageLocal \\
+
+\noindent Last roman page (pagesLTS.roman): \lastpageref{pagesLTS.roman}{\hskip4em }
+(There are \lastpageref{pagesLTS.roman.local} pages with roman numbers.)\\
+
+\noindent Last Roman page (pagesLTS.Roman): \lastpageref{pagesLTS.Roman}{\hskip3em }
+(There are \lastpageref{pagesLTS.Roman.local}~pages with Roman numbers:\\
+\lastpages{Roman}{1}~pages in the first Roman sector
+(\pageref{Roman}{\hskip3em }-\lastpageref{pagesLTS.Roman.1}{\hskip3em }),\\
+\lastpages{Roman}{2}~pages in the second Roman sector
+(\pageref{Roman2}{\hskip3em }-\lastpageref{pagesLTS.Roman.2}{\hskip3em }), and\\
+\lastpages{Roman}{3}~pages in the third Roman sector
+(\pageref{Roman3}{\hskip3em }-\lastpageref{pagesLTS.Roman.3}{\hskip3em }).\\
+
+\noindent Last arabic page (pagesLTS.arabic): \lastpageref{pagesLTS.arabic}{\hskip5em }
+(There are only \lastpageref{pagesLTS.arabic.local} pages with arabic numbers,
+because an \texttt{\textbackslash addtocounter\{page\}\{\arabic{pagesLTS.exampleArabic}\}} was used.)\\
+
+\noindent Last fnsymbol page (pagesLTS.fnsymbol): \lastpageref{pagesLTS.fnsymbol} \\
+(\texttt{\textbackslash lastpageref\{pagesLTS.fnsymbol\}} -- never
+\texttt{\textbackslash pageref\{pagesLTS.fnsymbol\}}!)\\
+(There are \lastpageref{pagesLTS.fnsymbol.local} pages with fnsymbol numbers.)\\
+
+\noindent Last alph page (pagesLTS.alph): \lastpageref{pagesLTS.alph}{\hskip4em }
+(There are only \lastpageref{pagesLTS.alph.local} pages with alph numbers,
+because an \texttt{\textbackslash addtocounter\{page\}\{\arabic{pagesLTS.examplealph}\}} was used.)\\
+
+\noindent Last Alph page (pagesLTS.Alph): \lastpageref{pagesLTS.Alph}{\hskip4em }
+(There are \lastpageref{pagesLTS.Alph.local} pages with Alph numbers.)\\
+
+\noindent Last page's \textit{name} (LastPage): \lastpageref{LastPage}\\
+
+\noindent Very last page's \textit{name} (VeryLastPage): \lastpageref{VeryLastPage}\\
+(\texttt{LastPage} and \texttt{VeryLastPage} are identical, unless
+a package with output \linebreak
+\texttt{\textbackslash AtEndDocument} after the \textsf{pagesLTS} package
+was added.)\\
+
+\noindent Last page's \textit{number} (LastPages): \lastpageref{LastPages}{\hskip3em }
+(=~total number of pages)\\
+
+\lipsum[1-4]
+
+\newpage
+
+\subsection[addtocounter, setcounter]{Neither\ %
+\texttt{\textbackslash addtocounter\{page\}} or\ %
+\texttt{\textbackslash setcounter\{page\}} is a problem for the\ %
+current or total page numbers}
+
+(Here is an \texttt{\textbackslash addtocounter\{page\}\{\arabic{pagesLTS.exampleArabic}\}}
+in the source code.)\\
+\addtocounter{page}{\value{pagesLTS.exampleArabic}}
+
+\noindent The page (from \texttt{\textbackslash thepage} command): \thepage \\
+
+\noindent Current page (from \texttt{\textbackslash theCurrentPage}\ %
+command), i.\,e. counted continuously from the first page): \theCurrentPage \\
+
+\noindent CurrentPageLocal (from \texttt{\textbackslash theCurrentPageLocal}\ %
+command), i.\,e. counted continuously from the first page of the
+current page numbering sheme): \theCurrentPageLocal\\
+
+\noindent Last page's number (LastPages): \lastpageref{LastPages}{\hskip3em }
+(= total number of pages)\\
+
+\lipsum[1-7]
+
+\newpage
+
+\pagenumbering{fnsymbol}
+
+\section{fnsymbol}
+
+Adobe Acrobat Reader 9.3.1 does not show the correct page names
+for all pages with \texttt{fnsymbol} page numbering scheme:
+
+\begin{tabular}{c|c|c|c}
+page number & page name         & shown by the Reader & \textsf{alphalph}                      \\ \hline
+$-1$ & \texttt{LaTeX Error}                &          & \ensuremath  {- *}                            \\
+ $0$ & (ignored by \LaTeX)                 &          & 0                                             \\
+ $1$ & \ensuremath  {*}                    & *        & \ensuremath  {*}                              \\
+ $2$ & \ensuremath  {\dagger }             &          & \ensuremath  {\dagger }                       \\
+ $3$ & \ensuremath  {\ddagger }            &          & \ensuremath  {\ddagger }                      \\
+ $4$ & \ensuremath  {\mathsection }        &          & \ensuremath  {\mathsection }                  \\
+ $5$ & \ensuremath  {\mathparagraph }      &          & \ensuremath  {\mathparagraph }                \\
+ $6$ & \ensuremath  {\delimiter "026B30D } & "026B30D & \ensuremath  {**}                             \\
+ $7$ & \ensuremath  {**}                   & **       & \ensuremath  {\dagger \dagger }               \\
+ $8$ & \ensuremath  {\dagger \dagger }     &          & \ensuremath  {\ddagger \ddagger }             \\
+ $9$ & \ensuremath  {\ddagger \ddagger }   &          & \ensuremath  {\mathsection \mathsection }     \\
+$10$ & \texttt{LaTeX Error}                &          & \ensuremath  {\mathparagraph \mathparagraph } \\
+$11$ & \texttt{LaTeX Error}                &          & \ensuremath  {***}                            \\
+$12$ & \texttt{LaTeX Error}                &          & \ensuremath  {\dagger \dagger \dagger }       \\
+\end{tabular}
+
+\noindent and so on, while at least the (\ldots\ of \ldots ) part
+of the page number is displayed correctly.\\
+
+\bigskip
+
+Without option \texttt{fnsymbolmult=true} of the \textsf{pagesLTS} package
+(and the help of Heiko Oberdiek's \textsf{alphalph} package),
+after page~9
+(\textquotedblleft \ensuremath {\ddagger \ddagger }\textquotedblright )
+(and also for negative page numbers) there would just appear a
+\begin{quote}
+\begin{verbatim}
+LaTeX Error: Counter too large
+See the LaTeX manual or LaTeX Companion for explanation.
+You've lost some text.  Try typing  <return>  to proceed.
+If that doesn't work, type  X <return>  to quit.
+\end{verbatim}
+\end{quote}
+Now the page numbers after 5 (\ensuremath  {\mathparagraph }) are
+continued  with the doubled \textquotedblleft number\textquotedblright\ of
+the first, second, third,\ldots\ page (\ensuremath  {**},
+\ensuremath  {\dagger \dagger }, \ensuremath  {\ddagger \ddagger },
+\ensuremath  {\mathsection \mathsection },
+\ensuremath  {\mathparagraph \mathparagraph }),
+and after the tenth page the \textquotedblleft number\textquotedblright\ is
+tripled (\ensuremath  {***}, \ensuremath  {\dagger \dagger \dagger },\ldots).
+Page zero is named 0 and negative pages just named like the positive ones
+with addition of a minus sign~($-$).
+
+\bigskip
+
+\noindent First page (\texttt{\textbackslash lastpageref\{pagesLTS.0\}}):
+\lastpageref{pagesLTS.0}\\
+
+\noindent The page (\texttt{\textbackslash thepage}): \thepage \\
+
+\noindent Current page (\texttt{\textbackslash theCurrentPage}),
+i.\,e. counted continuously from the first page): \theCurrentPage \\
+
+\noindent CurrentPageLocal (\texttt{\textbackslash theCurrentPageLocal}),
+i.\,e. counted continuously from the first page of the
+current page numbering sheme): \theCurrentPageLocal \\
+
+\noindent Last roman page (pagesLTS.roman): \lastpageref{pagesLTS.roman}{\hskip4em }
+(There are \lastpageref{pagesLTS.roman.local} pages with roman numbers.)\\
+
+\noindent Last Roman page (pagesLTS.Roman): \lastpageref{pagesLTS.Roman}{\hskip3em }
+(There are \lastpageref{pagesLTS.Roman.local}~pages with Roman numbers:\\
+\lastpages{Roman}{1}~pages in the first Roman sector
+(\pageref{Roman}{\hskip3em }-\lastpageref{pagesLTS.Roman.1}{\hskip3em }),\\
+\lastpages{Roman}{2}~pages in the second Roman sector
+(\pageref{Roman2}{\hskip3em }-\lastpageref{pagesLTS.Roman.2}{\hskip3em }), and\\
+\lastpages{Roman}{3}~pages in the third Roman sector
+(\pageref{Roman3}{\hskip3em }-\lastpageref{pagesLTS.Roman.3}{\hskip3em }).\\
+
+\noindent Last arabic page (pagesLTS.arabic): \lastpageref{pagesLTS.arabic}{\hskip5em }
+(There are only \lastpageref{pagesLTS.arabic.local} pages with arabic numbers,
+because an \texttt{\textbackslash addtocounter\{page\}\{\arabic{pagesLTS.exampleArabic}\}} was used.)\\
+
+\noindent Last fnsymbol page (pagesLTS.fnsymbol): \lastpageref{pagesLTS.fnsymbol} \\
+(\texttt{\textbackslash lastpageref\{pagesLTS.fnsymbol\}} -- never
+\texttt{\textbackslash pageref\{pagesLTS.fnsymbol\}}!)\\
+(There are \lastpageref{pagesLTS.fnsymbol.local} pages with fnsymbol numbers.)\\
+
+\noindent Last alph page (pagesLTS.alph): \lastpageref{pagesLTS.alph}{\hskip4em }
+(There are only \lastpageref{pagesLTS.alph.local} pages with alph numbers,
+because an \texttt{\textbackslash addtocounter\{page\}\{\arabic{pagesLTS.examplealph}\}} was used.)\\
+
+\noindent Last Alph page (pagesLTS.Alph): \lastpageref{pagesLTS.Alph}{\hskip4em }
+(There are \lastpageref{pagesLTS.Alph.local} pages with Alph numbers.)\\
+
+\noindent Last page's \textit{name} (LastPage): \lastpageref{LastPage}\\
+
+\noindent Very last page's \textit{name} (VeryLastPage): \lastpageref{VeryLastPage}\\
+(\texttt{LastPage} and \texttt{VeryLastPage} are identical, unless
+a package with output \linebreak
+\texttt{\textbackslash AtEndDocument} after the \textsf{pagesLTS} package
+was added.)\\
+
+\noindent Last page's \textit{number} (LastPages): \lastpageref{LastPages}{\hskip3em }
+(=~total number of pages)\\
+
+\lipsum[1-60]
+
+\newpage
+
+\pagenumbering{Roman}
+
+\section{Roman - again!\label{Roman2}}
+
+The page number would start with
+\textquotedblleft I\textquotedblright\ again -- but
+for the \textsf{pagesLTS} package (with option \texttt{pagecontinue=true},
+or with option just \texttt{pagecontinue}, or even just
+\nolinebreak{with\textbf{out}} option \texttt{pagecontinue=false}).
+This package remembered the
+(\arabic{pagesLTS.double.Roman}-1)\footnote{OK, here\ %
+you have to compute this value for yourself, but\ %
+subtracting one should be managable for \TeX nicians.} pages already
+done in Roman output, and therefore continues with page
+\textquotedblleft \thepage \textquotedblright .\\
+If you want to start with \textquotedblleft I\textquotedblright\ all
+over again, you will have two pages with the same name,
+but nevertheless you can do this by using option \texttt{pagecontinue=false}
+or a \texttt{\textbackslash setcounter\{page\}\{1\}}\ here
+(not demonstrated in this example file).\\
+
+\noindent First page (\texttt{\textbackslash lastpageref\{pagesLTS.0\}}):
+ \lastpageref{pagesLTS.0}\\
+
+\noindent The page (\texttt{\textbackslash thepage}): \thepage \\
+
+\noindent Current page (\texttt{\textbackslash theCurrentPage}),
+i.\,e. counted continuously from the first page): \theCurrentPage \\
+
+\noindent CurrentPageLocal (\texttt{\textbackslash theCurrentPageLocal}),
+i.\,e. counted continuously from the first page of the
+current page numbering sheme): \theCurrentPageLocal \\
+
+\noindent Last roman page (pagesLTS.roman): \lastpageref{pagesLTS.roman}{\hskip4em }
+(There are \lastpageref{pagesLTS.roman.local} pages with roman numbers.)\\
+
+\noindent Last Roman page (pagesLTS.Roman): \lastpageref{pagesLTS.Roman}{\hskip3em }
+(There are \lastpageref{pagesLTS.Roman.local}~pages with Roman numbers:\\
+\lastpages{Roman}{1}~pages in the first Roman sector
+(\pageref{Roman}{\hskip3em }-\lastpageref{pagesLTS.Roman.1}{\hskip3em }),\\
+\lastpages{Roman}{2}~pages in the second Roman sector
+(\pageref{Roman2}{\hskip3em }-\lastpageref{pagesLTS.Roman.2}{\hskip3em }), and\\
+\lastpages{Roman}{3}~pages in the third Roman sector
+(\pageref{Roman3}{\hskip3em }-\lastpageref{pagesLTS.Roman.3}{\hskip3em }).\\
+
+\noindent Last arabic page (pagesLTS.arabic): \lastpageref{pagesLTS.arabic}{\hskip5em }
+(There are only \lastpageref{pagesLTS.arabic.local} pages with arabic numbers,
+because an \texttt{\textbackslash addtocounter\{page\}\{\arabic{pagesLTS.exampleArabic}\}} was used.)\\
+
+\noindent Last fnsymbol page (pagesLTS.fnsymbol): \lastpageref{pagesLTS.fnsymbol} \\
+(\texttt{\textbackslash lastpageref\{pagesLTS.fnsymbol\}} -- never
+\texttt{\textbackslash pageref\{pagesLTS.fnsymbol\}}!)\\
+(There are \lastpageref{pagesLTS.fnsymbol.local} pages with fnsymbol numbers.)\\
+
+\noindent Last alph page (pagesLTS.alph): \lastpageref{pagesLTS.alph}{\hskip4em }
+(There are only \lastpageref{pagesLTS.alph.local} pages with alph numbers,
+because an \texttt{\textbackslash addtocounter\{page\}\{\arabic{pagesLTS.examplealph}\}} was used.)\\
+
+\noindent Last Alph page (pagesLTS.Alph): \lastpageref{pagesLTS.Alph}{\hskip4em }
+(There are \lastpageref{pagesLTS.Alph.local} pages with Alph numbers.)\\
+
+\noindent Last page's \textit{name} (LastPage): \lastpageref{LastPage}\\
+
+\noindent Very last page's \textit{name} (VeryLastPage): \lastpageref{VeryLastPage}\\
+(\texttt{LastPage} and \texttt{VeryLastPage} are identical, unless
+a package with output \linebreak
+\texttt{\textbackslash AtEndDocument} after the \textsf{pagesLTS} package
+was added.)\\
+
+\noindent Last page's \textit{number} (LastPages): \lastpageref{LastPages}{\hskip3em }
+(=~total number of pages)\\
+
+\lipsum[1-6]
+
+\newpage
+
+\texttt{\textbackslash lastpageref\{pagesLTS.Roman\}} does \textbf{not}
+refer to this page (but there: \lastpageref{pagesLTS.Roman}),
+because the option \texttt{pagecontinue=true}
+was chosen. When a reference to this page is wanted,\\
+\texttt{\textbackslash lastpageref\{pagesLTS.Roman.2\}}
+can be used: \lastpageref{pagesLTS.Roman.2}.\\
+
+\bigskip
+There are \lastpages{Roman}{2}~pages
+(\texttt{\textbackslash lastpages\{Roman\}\{2\}})
+in this second Roman sector.\\
+The Roman page numbering scheme is continued later in
+section~\ref{Roman3})!
+
+\newpage
+
+\pagenumbering{alph}
+
+\section{alph\label{alph}}
+
+\noindent First page (\texttt{\textbackslash lastpageref\{pagesLTS.0\}}):
+ \lastpageref{pagesLTS.0}\\
+
+\noindent The page (\texttt{\textbackslash thepage}): \thepage \\
+
+\noindent Current page (\texttt{\textbackslash theCurrentPage}),
+i.\,e. counted continuously from the first page): \theCurrentPage \\
+
+\noindent CurrentPageLocal (\texttt{\textbackslash theCurrentPageLocal}),
+i.\,e. counted continuously from the first page of the
+current page numbering sheme): \theCurrentPageLocal \\
+
+\noindent Last roman page (pagesLTS.roman): \lastpageref{pagesLTS.roman}{\hskip4em }
+(There are \lastpageref{pagesLTS.roman.local} pages with roman numbers.)\\
+
+\noindent Last Roman page (pagesLTS.Roman): \lastpageref{pagesLTS.Roman}{\hskip3em }
+(There are \lastpageref{pagesLTS.Roman.local}~pages with Roman numbers:\\
+\lastpages{Roman}{1}~pages in the first Roman sector
+(\pageref{Roman}{\hskip3em }-\lastpageref{pagesLTS.Roman.1}{\hskip3em }),\\
+\lastpages{Roman}{2}~pages in the second Roman sector
+(\pageref{Roman2}{\hskip3em }-\lastpageref{pagesLTS.Roman.2}{\hskip3em }), and\\
+\lastpages{Roman}{3}~pages in the third Roman sector
+(\pageref{Roman3}{\hskip3em }-\lastpageref{pagesLTS.Roman.3}{\hskip3em }).\\
+
+\noindent Last arabic page (pagesLTS.arabic): \lastpageref{pagesLTS.arabic}{\hskip5em }
+(There are only \lastpageref{pagesLTS.arabic.local} pages with arabic numbers,
+because an \texttt{\textbackslash addtocounter\{page\}\{\arabic{pagesLTS.exampleArabic}\}} was used.)\\
+
+\noindent Last fnsymbol page (pagesLTS.fnsymbol): \lastpageref{pagesLTS.fnsymbol} \\
+(\texttt{\textbackslash lastpageref\{pagesLTS.fnsymbol\}} -- never
+\texttt{\textbackslash pageref\{pagesLTS.fnsymbol\}}!)\\
+(There are \lastpageref{pagesLTS.fnsymbol.local} pages with fnsymbol numbers.)\\
+
+\noindent Last alph page (pagesLTS.alph): \lastpageref{pagesLTS.alph}{\hskip4em }
+(There are only \lastpageref{pagesLTS.alph.local} pages with alph numbers,
+because an \texttt{\textbackslash addtocounter\{page\}\{\arabic{pagesLTS.examplealph}\}} was used.)\\
+
+\noindent Last Alph page (pagesLTS.Alph): \lastpageref{pagesLTS.Alph}{\hskip4em }
+(There are \lastpageref{pagesLTS.Alph.local} pages with Alph numbers.)\\
+
+\noindent Last page's \textit{name} (LastPage): \lastpageref{LastPage}\\
+
+\noindent Very last page's \textit{name} (VeryLastPage): \lastpageref{VeryLastPage}\\
+(\texttt{LastPage} and \texttt{VeryLastPage} are identical, unless
+a package with output \linebreak
+\texttt{\textbackslash AtEndDocument} after the \textsf{pagesLTS} package
+was added.)\\
+
+\noindent Last page's \textit{number} (LastPages): \lastpageref{LastPages}{\hskip3em }
+(=~total number of pages)\\
+
+\lipsum[1-4]
+
+\newpage
+
+Without option \texttt{alphMult=ab} of the \textsf{pagesLTS} (and the help of
+Heiko Oberdiek's \textsf{alphalph} package), after page
+\textquotedblleft z\textquotedblright\ there would just appear a
+\begin{quote}
+\begin{verbatim}
+LaTeX Error: Counter too large
+See the LaTeX manual or LaTeX Companion for explanation.
+You've lost some text.  Try typing  <return>  to proceed.
+If that doesn't work, type  X <return>  to quit.
+\end{verbatim}
+\end{quote}
+Now the page numbers are continued aa, ab, ac,\ldots\ (aa, bb, cc,\ldots\ is
+also possible, see the \textsf{pagesLTS} documentation).\\
+To demonstrate this, we add a\\
+\texttt{\textbackslash addtocounter\{page\}\{\arabic{pagesLTS.examplealph}\}}\\
+in the source code here.
+
+\addtocounter{page}{\arabic{pagesLTS.examplealph}}
+
+\bigskip
+
+\lipsum[1-18]
+
+\newpage
+
+\pagenumbering{Roman}
+
+\section{Roman - third time!\label{Roman3}}
+
+The page number would start with
+\textquotedblleft I\textquotedblright\ again -- but
+for the \textsf{pagesLTS} package (with option \texttt{pagecontinue=true},
+or with option just \texttt{pagecontinue}, or even just
+\nolinebreak{with\textbf{out}} option \texttt{pagecontinue=false}).
+This package remembered the
+(\arabic{pagesLTS.double.Roman}-1)\footnote{OK, here\ %
+you have to compute this value for yourself, but\ %
+subtracting one should be managable for \TeX nicians.} pages already
+done in Roman output, and therefore continues with page
+\textquotedblleft \thepage \textquotedblright .\\
+If you want to start with \textquotedblleft I\textquotedblright\ all
+over again, you will have (at least) two pages with the same name,
+but nevertheless you can do this by using option
+\texttt{pagecontinue=false} instead of \texttt{pagecontinue=true}
+(not demonstrated here).\\
+
+\noindent First page (\texttt{\textbackslash lastpageref\{pagesLTS.0\}}):
+ \lastpageref{pagesLTS.0}\\
+
+\noindent The page (\texttt{\textbackslash thepage}): \thepage \\
+
+\noindent Current page (\texttt{\textbackslash theCurrentPage}),
+i.\,e. counted continuously from the first page): \theCurrentPage \\
+
+\noindent CurrentPageLocal (\texttt{\textbackslash theCurrentPageLocal}),
+i.\,e. counted continuously from the first page of the
+current page numbering sheme): \theCurrentPageLocal \\
+
+\noindent Last roman page (pagesLTS.roman): \lastpageref{pagesLTS.roman}{\hskip4em }
+(There are \lastpageref{pagesLTS.roman.local} pages with roman numbers.)\\
+
+\noindent Last Roman page (pagesLTS.Roman): \lastpageref{pagesLTS.Roman}{\hskip3em }
+(There are \lastpageref{pagesLTS.Roman.local}~pages with Roman numbers:\\
+\lastpages{Roman}{1}~pages in the first Roman sector
+(\pageref{Roman}{\hskip3em }-\lastpageref{pagesLTS.Roman.1}{\hskip3em }),\\
+\lastpages{Roman}{2}~pages in the second Roman sector
+(\pageref{Roman2}{\hskip3em }-\lastpageref{pagesLTS.Roman.2}{\hskip3em }), and\\
+\lastpages{Roman}{3}~pages in the third Roman sector
+(\pageref{Roman3}{\hskip3em }-\lastpageref{pagesLTS.Roman.3}{\hskip3em }).\\
+
+\noindent Last arabic page (pagesLTS.arabic): \lastpageref{pagesLTS.arabic}{\hskip5em }
+(There are only \lastpageref{pagesLTS.arabic.local} pages with arabic numbers,
+because an \texttt{\textbackslash addtocounter\{page\}\{\arabic{pagesLTS.exampleArabic}\}} was used.)\\
+
+\noindent Last fnsymbol page (pagesLTS.fnsymbol): \lastpageref{pagesLTS.fnsymbol} \\
+(\texttt{\textbackslash lastpageref\{pagesLTS.fnsymbol\}} -- never
+\texttt{\textbackslash pageref\{pagesLTS.fnsymbol\}}!)\\
+(There are \lastpageref{pagesLTS.fnsymbol.local} pages with fnsymbol numbers.)\\
+
+\noindent Last alph page (pagesLTS.alph): \lastpageref{pagesLTS.alph}{\hskip4em }
+(There are only \lastpageref{pagesLTS.alph.local} pages with alph numbers,
+because an \texttt{\textbackslash addtocounter\{page\}\{\arabic{pagesLTS.examplealph}\}} was used.)\\
+
+\noindent Last Alph page (pagesLTS.Alph): \lastpageref{pagesLTS.Alph}{\hskip4em }
+(There are \lastpageref{pagesLTS.Alph.local} pages with Alph numbers.)\\
+
+\noindent Last page's \textit{name} (LastPage): \lastpageref{LastPage}\\
+
+\noindent Very last page's \textit{name} (VeryLastPage): \lastpageref{VeryLastPage}\\
+(\texttt{LastPage} and \texttt{VeryLastPage} are identical, unless
+a package with output \linebreak
+\texttt{\textbackslash AtEndDocument} after the \textsf{pagesLTS} package
+was added.)\\
+
+\noindent Last page's \textit{number} (LastPages): \lastpageref{LastPages}{\hskip3em }
+(=~total number of pages)\\
+
+\lipsum[1-3]
+
+\newpage
+
+\lastpageref{pagesLTS.Roman}
+(\texttt{\textbackslash lastpageref\{pagesLTS.Roman\}})
+\textbf{does} refers to this page, because the option
+\texttt{pagecontinue=true} was chosen. Also\\
+\texttt{\textbackslash lastpageref\{pagesLTS.Roman.3\}}
+can be used: \lastpageref{pagesLTS.Roman.3}.\\
+
+\bigskip
+
+There are \lastpages{Roman}{3}~pages
+(\texttt{\textbackslash lastpages\{Roman\}\{3\}})
+in this third Roman sector.\\
+
+\newpage
+
+\pagenumbering{Alph}
+
+\section{Alph}
+
+\noindent First page (\texttt{\textbackslash lastpageref\{pagesLTS.0\}}):
+ \lastpageref{pagesLTS.0}\\
+
+\noindent The page (\texttt{\textbackslash thepage}): \thepage \\
+
+\noindent Current page (\texttt{\textbackslash theCurrentPage}),
+i.\,e. counted continuously from the first page): \theCurrentPage \\
+
+\noindent CurrentPageLocal (\texttt{\textbackslash theCurrentPageLocal}),
+i.\,e. counted continuously from the first page of the
+current page numbering sheme): \theCurrentPageLocal \\
+
+\noindent Last roman page (pagesLTS.roman): \lastpageref{pagesLTS.roman}{\hskip4em }
+(There are \lastpageref{pagesLTS.roman.local} pages with roman numbers.)\\
+
+\noindent Last Roman page (pagesLTS.Roman): \lastpageref{pagesLTS.Roman}{\hskip3em }
+(There are \lastpageref{pagesLTS.Roman.local}~pages with Roman numbers:\\
+\lastpages{Roman}{1}~pages in the first Roman sector
+(\pageref{Roman}{\hskip3em }-\lastpageref{pagesLTS.Roman.1}{\hskip3em }),\\
+\lastpages{Roman}{2}~pages in the second Roman sector
+(\pageref{Roman2}{\hskip3em }-\lastpageref{pagesLTS.Roman.2}{\hskip3em }), and\\
+\lastpages{Roman}{3}~pages in the third Roman sector
+(\pageref{Roman3}{\hskip3em }-\lastpageref{pagesLTS.Roman.3}{\hskip3em }).\\
+
+\noindent Last arabic page (pagesLTS.arabic): \lastpageref{pagesLTS.arabic}{\hskip5em }
+(There are only \lastpageref{pagesLTS.arabic.local} pages with arabic numbers,
+because an \texttt{\textbackslash addtocounter\{page\}\{\arabic{pagesLTS.exampleArabic}\}} was used.)\\
+
+\noindent Last fnsymbol page (pagesLTS.fnsymbol): \lastpageref{pagesLTS.fnsymbol} \\
+(\texttt{\textbackslash lastpageref\{pagesLTS.fnsymbol\}} -- never
+\texttt{\textbackslash pageref\{pagesLTS.fnsymbol\}}!)\\
+(There are \lastpageref{pagesLTS.fnsymbol.local} pages with fnsymbol numbers.)\\
+
+\noindent Last alph page (pagesLTS.alph): \lastpageref{pagesLTS.alph}{\hskip4em }
+(There are only \lastpageref{pagesLTS.alph.local} pages with alph numbers,
+because an \texttt{\textbackslash addtocounter\{page\}\{\arabic{pagesLTS.examplealph}\}} was used.)\\
+
+\noindent Last Alph page (pagesLTS.Alph): \lastpageref{pagesLTS.Alph}{\hskip4em }
+(There are \lastpageref{pagesLTS.Alph.local} pages with Alph numbers.)\\
+
+\noindent Last page's \textit{name} (LastPage): \lastpageref{LastPage}\\
+
+\noindent Very last page's \textit{name} (VeryLastPage): \lastpageref{VeryLastPage}\\
+(\texttt{LastPage} and \texttt{VeryLastPage} are identical, unless
+a package with output \linebreak
+\texttt{\textbackslash AtEndDocument} after the \textsf{pagesLTS} package
+was added.)\\
+
+\noindent Last page's \textit{number} (LastPages): \lastpageref{LastPages}{\hskip3em }
+(=~total number of pages)\\
+
+\lipsum[1-3]
+
+Without option \texttt{alphMulti=AB} of the \textsf{pagesLTS} (and the help of
+Heiko Oberdiek's \textsf{alphalph} package), after page
+\textquotedblleft Z\textquotedblright\ there would just appear a
+\begin{quote}
+\begin{verbatim}
+LaTeX Error: Counter too large
+See the LaTeX manual or LaTeX Companion for explanation.
+You've lost some text.  Try typing  <return>  to proceed.
+If that doesn't work, type  X <return>  to quit.
+\end{verbatim}
+\end{quote}
+Now the page numbers are continued AA, AB, AC,\ldots\ (AA, BB, CC,\ldots\ is
+also possible, see the \textsf{pagesLTS} documentation).\\
+This is not demonstrated here, but see section~\ref{alph}.
+
+\newpage
+
+\section{The End}
+
+\noindent First page (\texttt{\textbackslash lastpageref\{pagesLTS.0\}}):
+ \lastpageref{pagesLTS.0}\\
+
+\noindent The page (\texttt{\textbackslash thepage}): \thepage \\
+
+\noindent Current page (\texttt{\textbackslash theCurrentPage}),
+i.\,e. counted continuously from the first page): \theCurrentPage \\
+
+\noindent CurrentPageLocal (\texttt{\textbackslash theCurrentPageLocal}),
+i.\,e. counted continuously from the first page of the
+current page numbering sheme): \theCurrentPageLocal \\
+
+\noindent Last roman page (pagesLTS.roman): \lastpageref{pagesLTS.roman}{\hskip4em }
+(There are \lastpageref{pagesLTS.roman.local} pages with roman numbers.)\\
+
+\noindent Last Roman page (pagesLTS.Roman): \lastpageref{pagesLTS.Roman}{\hskip3em }
+(There are \lastpageref{pagesLTS.Roman.local}~pages with Roman numbers:\\
+\lastpages{Roman}{1}~pages in the first Roman sector
+(\pageref{Roman}{\hskip3em }-\lastpageref{pagesLTS.Roman.1}{\hskip3em }),\\
+\lastpages{Roman}{2}~pages in the second Roman sector
+(\pageref{Roman2}{\hskip3em }-\lastpageref{pagesLTS.Roman.2}{\hskip3em }), and\\
+\lastpages{Roman}{3}~pages in the third Roman sector
+(\pageref{Roman3}{\hskip3em }-\lastpageref{pagesLTS.Roman.3}{\hskip3em }).\\
+
+\noindent Last arabic page (pagesLTS.arabic): \lastpageref{pagesLTS.arabic}{\hskip5em }
+(There are only \lastpageref{pagesLTS.arabic.local} pages with arabic numbers,
+because an \texttt{\textbackslash addtocounter\{page\}\{\arabic{pagesLTS.exampleArabic}\}} was used.)\\
+
+\noindent Last fnsymbol page (pagesLTS.fnsymbol): \lastpageref{pagesLTS.fnsymbol} \\
+(\texttt{\textbackslash lastpageref\{pagesLTS.fnsymbol\}} -- never
+\texttt{\textbackslash pageref\{pagesLTS.fnsymbol\}}!)\\
+(There are \lastpageref{pagesLTS.fnsymbol.local} pages with fnsymbol numbers.)\\
+
+\noindent Last alph page (pagesLTS.alph): \lastpageref{pagesLTS.alph}{\hskip4em }
+(There are only \lastpageref{pagesLTS.alph.local} pages with alph numbers,
+because an \texttt{\textbackslash addtocounter\{page\}\{\arabic{pagesLTS.examplealph}\}} was used.)\\
+
+\noindent Last Alph page (pagesLTS.Alph): \lastpageref{pagesLTS.Alph}{\hskip4em }
+(There are \lastpageref{pagesLTS.Alph.local} pages with Alph numbers.)\\
+
+\noindent Last page's \textit{name} (LastPage): \lastpageref{LastPage}\\
+
+\noindent Very last page's \textit{name} (VeryLastPage): \lastpageref{VeryLastPage}\\
+(\texttt{LastPage} and \texttt{VeryLastPage} are identical, unless
+a package with output \linebreak
+\texttt{\textbackslash AtEndDocument} after the \textsf{pagesLTS} package
+was added.)\\
+
+\noindent Last page's \textit{number} (LastPages): \lastpageref{LastPages}{\hskip3em }
+(=~total number of pages)\\
+
+\medskip
+
+\noindent Page \thepage\ (\theCurrentPage; local: \theCurrentPageLocal) of %
+\lastpageref{pagesLTS.roman} (\lastpageref{pagesLTS.roman.local}) + %
+\lastpageref{pagesLTS.Roman} (\lastpageref{pagesLTS.Roman.local}) + %
+\lastpageref{pagesLTS.arabic} (\lastpageref{pagesLTS.arabic.local}) + %
+\lastpageref{pagesLTS.fnsymbol} (\lastpageref{pagesLTS.fnsymbol.local}) + %
+\lastpageref{pagesLTS.alph} (\lastpageref{pagesLTS.alph.local}) + %
+\lastpageref{pagesLTS.Alph} (\lastpageref{pagesLTS.Alph.local}) = %
+\lastpageref{LastPages} pages.
+
+\end{document}
+%</example>
+%    \end{macrocode}
+%
+% \newpage
+%
+% \section{The implementation}
+%
+% (This and the source code of the example file are the reasons
+% for printing the documentation in landscape format instead of portrait.)\\
+%
+% We start off by checking that we are loading into \LaTeXe\ and
+% announcing the name and version of this package.
+%
+%    \begin{macrocode}
+%<*package>
+%    \end{macrocode}
+%
+%    \begin{macrocode}
+\NeedsTeXFormat{LaTeX2e}[1994/06/01]
+\ProvidesPackage{pagesLTS}[2010/06/03 v1.1b
+            Refers to special pages' numbers/names (HMM)]%
+
+%    \end{macrocode}
+%
+% A short description of the \textsf{pagesLTS} package:
+%
+%    \begin{macrocode}
+%% Allow for things like\\
+%% |Page \thepage\ (\theCurrentPage; local: \theCurrentPageLocal) of %
+%%  \lastpageref{pagesLTS.roman}(\lastpageref{pagesLTS.roman.local}) + %
+%%  \lastpageref{pagesLTS.Roman}(\lastpageref{pagesLTS.Roman.local}) + %
+%%  \lastpageref{pagesLTS.arabic}(\lastpageref{pagesLTS.arabic.local}) + %
+%%  \lastpageref{pagesLTS.fnsymbol}(\lastpageref{pagesLTS.fnsymbol.local}) + %
+%%  \lastpageref{pagesLTS.alph}(\lastpageref{pagesLTS.alph.local}) + %
+%%  \lastpageref{pagesLTS.Alph}(\lastpageref{pagesLTS.Alph.local}) = %
+%%  \lastpageref{LastPages} pages.|\\
+%% to get\\
+%% 'Page d (57; local: 4) of ii(2) + XX(20) + *(1) + 30(30) + e(5) + C(3) = 61 pages.'.
+
+%    \end{macrocode}
+%
+% For its |\AfterLastShipout| command we need the \textsf{atveryend}
+% package of Heiko Oberdiek (see subsection~\ref{ss:Downloads}):
+%
+%    \begin{macrocode}
+\RequirePackage{atveryend}[2010/03/24]% v1.5
+%    \end{macrocode}
+%
+% For its |\EveryShipout| command we need the \textsf{everyshi}
+% package of Martin Schr\"oder (see subsection~\ref{ss:Downloads}):
+%
+%    \begin{macrocode}
+\RequirePackage{everyshi}[2001/05/15]%v 3.00
+%    \end{macrocode}
+%
+% For the handling of the options we need the \textsf{kvoptions}
+% package of Heiko Oberdiek (see subsection~\ref{ss:Downloads}):
+%
+%    \begin{macrocode}
+\RequirePackage{kvoptions}[2010/02/22]% v3.7
+%    \end{macrocode}
+%
+% The \textsf{undolabl} package of H.-Martin M\"{u}nch,
+% with code from Ulrich Diez, (see subsection~\ref{ss:Downloads})
+% is needed to overwrite labels, when the same page numbering scheme
+% is used twice (or even more often).
+%
+%    \begin{macrocode}
+\RequirePackage{undolabl}[2010/06/03]% v1.0b
+%    \end{macrocode}
+%
+% We must not forget to give the source of |Prelim@EveryShipout|:
+%
+%    \begin{macrocode}
+%% pagesLTS package uses Prelim@EveryShipout code from the
+%% prelim2e package [2009/05/29 v1.3] by Martin Schr\"{o}der, thanks!
+
+%    \end{macrocode}
+%
+% About the \textsf{prelim2e} package of Martin Schr\"{o}der
+% see subsection~\ref{ss:Downloads}.\\
+%
+% A last information for the user(s):
+%
+%    \begin{macrocode}
+%% pagesLTS may work with earlier versions of those packages,
+%% but this was not tested. Please consider updating your packages
+%% to the most recent version (if they are not already the most
+%% recent version).
+
+%    \end{macrocode}
+% See subsection~\ref{ss:Downloads} about how to get them.\\
+%
+% The very old version~2.0 (and earlier) of the \textsf{endfloat}
+% package actually redefined the |\enddocument| command,
+% and so interferred drastically with the \LaTeXe\ commands which
+% make use of |\AtEndDocument|. Newer versions of \textsf{endfloat}
+% exists (at the time of writing this documentation: v2.4i as of 1995/10/11)
+% in modern documentation form, which should be available from \CTAN{}
+% (see subsection~\ref{ss:Downloads}).
+% A~note is placed here, and later it is checked whether a (very) old
+% \textsf{endfloat} package is in use. If it is, a warning or even
+% an error message is given, depending on \textsf{endfloat} version.
+% This assumes, that the old versions of endfloat at least gave
+% a version date, of course.
+%
+%    \begin{macrocode}
+%% The recent version of the endfloat package is v2.4i as of 1995/10/11.
+%% The pagesLTS package is not fully compatible with version 2.0
+%% (and earlier) of the endfloat package, because those versions
+%% redefined the \enddocument command.
+
+%    \end{macrocode}
+%
+% The options are introduced:
+%
+%    \begin{macrocode}
+\SetupKeyvalOptions{family = pagesLTS,prefix = pagesLTS@}
+\DeclareBoolOption[true]{pagecontinue} % \pagesLTS@pagecontinue
+\DeclareStringOption{alphMult}[ab]
+\DeclareStringOption{AlphMulti}[AB]
+\DeclareBoolOption[true]{romanMult}
+\DeclareBoolOption[true]{RomanMulti}
+\DeclareBoolOption[true]{fnsymbolmult}
+
+\ProcessKeyvalOptions*
+
+%    \end{macrocode}
+%
+% For comparisons, zero and one are defined (|\z@| and |\@ne|
+% do not work for this).
+%
+%    \begin{macrocode}
+\def\pagesLTS@zero{0}
+\def\pagesLTS@one{1}
+
+%    \end{macrocode}
+%
+% The traditional behaviour is a reset of the page number to one,
+% each time the page numbering scheme changes. The option
+% |pagecontinue| changes this to a continuation with the
+% number/name following the last page number/name of the same
+% page numbering scheme. The user is informed accordingly.
+%
+%    \begin{macrocode}
+\ifpagesLTS@pagecontinue%
+\PackageInfo{pagesLTS}{Option pagecontinue enabled\MessageBreak%
+  (maybe by default):\MessageBreak%
+  The pagesLTS package will continue the page numbering,\MessageBreak%
+  when the same page numbering scheme is used twice.\MessageBreak%
+  If you do not want this, call pagesLTS with option\MessageBreak%
+  pagecontinue=false\MessageBreak%
+  (or use \ setcounter{page}=1).\MessageBreak%
+}%
+\else%
+\PackageWarningNoLine{pagesLTS}{Option pagecontinue is false:\MessageBreak%
+  The pagesLTS package was used, but the option\MessageBreak%
+  pagecontinue was set to false.\MessageBreak%
+  If you want the page numbers to be continued,\MessageBreak%
+  when the same page numbering scheme is used twice,\MessageBreak%
+  please call pagesLTS with option pagecontinue=true,\MessageBreak%
+  otherwise the page number is reset to one each time\MessageBreak%
+  the page numbering scheme is changed.\MessageBreak%
+  For details please see the documentation!\MessageBreak%
+}%
+\fi%
+
+%    \end{macrocode}
+%
+% The page number printed in \texttt{alph} or in \texttt{Alph}
+% page numbering scheme had to be $>0$ and \nolinebreak{$<27$.}\ Now
+% the \textsf{AlphAlph} package allows to extend the
+% numbering scheme (not only for pages). Because some users
+% prefer aa, ab, ac, ad,\ldots\ and some aa, bb, cc, dd,\ldots,
+% both schemes can be choosen via the options.
+% The \texttt{fnsymbol} page numbering scheme was restricted to values
+% $>0$ and \nolinebreak{$<10$.}\ The \textsf{AlphAlph} package allows
+% to extend this page numbering scheme, too. Option \texttt{fnsymbolmult}
+% can be choosen with the \textsf{pagesLTS} package.
+% If no extension is whished (or another extension is whished
+% and implemented manually), \textsf{pagesLTS} can be called with
+% options set to 0 (zero) and flase: |alphMult=0|, |AlphMulti=0|,
+% |fnsymbolmult=false|.
+%
+%    \begin{macrocode}
+\def\pagesLTS@ab{ab}
+\def\pagesLTS@bb{bb}
+\def\pagesLTS@ABi{AB}
+\def\pagesLTS@BBi{BB}
+\def\pagesLTS@messageaMz{Option alphMult=0 found:\MessageBreak%
+  The pagesLTS package was used, but the option\MessageBreak%
+  alphMult was set to 0 (zero).\MessageBreak%
+  If you want the page numbers to be extended\MessageBreak%
+  after z, you have to organize this yourself now.\MessageBreak%
+  For automatic continuation, please use the\MessageBreak%
+  alphalph package and call pagesLTS\MessageBreak%
+  with option alphMult=ab (for aa, ab, ac, ad,...) or\MessageBreak%
+  with option alphMult=bb (for aa, bb, cc, dd,...).\MessageBreak%
+  For details please see the documentation!\MessageBreak%
+}
+\def\pagesLTS@messageAMiz{Option AlphMulti=0 found:\MessageBreak%
+  The pagesLTS package was used, but the option\MessageBreak%
+  AlphMulti was set to 0 (zero).\MessageBreak%
+  If you want the page numbers to be extended\MessageBreak%
+  after Z, you have to organize this yourself now.\MessageBreak%
+  For automatic continuation, please use the\MessageBreak%
+  alphalph package and call pagesLTS\MessageBreak%
+  with option AlphMulti=AB (for AA, AB, AC, AD,...) or\MessageBreak%
+  with option AlphMulti=BB (for AA, BB, CC, DD,...).\MessageBreak%
+  For details please see the documentation!\MessageBreak%
+}
+\def\pagesLTS@messagefsmz{Option fnsymbolmult is set to false:\MessageBreak%
+  The pagesLTS package was used, but the option\MessageBreak%
+  fnsymbolmult was set to false.\MessageBreak%
+  If you want the page numbering of the footnotesymbol\MessageBreak%
+  scheme to be extended using the AlphAlph package,\MessageBreak%
+  please call pagesLTS with option fnsymbolmult=true,\MessageBreak%
+  otherwise page numbers of the footnotesymbol scheme\MessageBreak%
+  greater than nine will need to be defined otherwise.\MessageBreak%
+  For details please see the documentation!\MessageBreak%
+}
+
+\ifx\pagesLTS@alphMult\pagesLTS@ab%
+  \relax%
+\else%
+  \ifx\pagesLTS@alphMult\pagesLTS@bb%
+    \relax%
+  \else%
+    \ifx\pagesLTS@alphMult\pagesLTS@zero%
+      \PackageWarningNoLine{pagesLTS}{\pagesLTS@messageaMz }%
+    \else%
+      \PackageError{pagesLTS}{Unknown option value}%
+        {The pagesLTS package was used with option\MessageBreak%
+         alphMult= \pagesLTS@alphMult . Only values\MessageBreak%
+         ab, bb, and 0 (zero) are valid.\MessageBreak%
+         The default ab is set.\MessageBreak%
+         For details please see the documentation!\MessageBreak%
+        }%
+      \setkeys{pagesLTS}{alphMult=ab}%
+    \fi%
+  \fi%
+\fi%
+
+\ifx\pagesLTS@AlphMulti\pagesLTS@ABi%
+  \relax%
+\else%
+  \ifx\pagesLTS@AlphMulti\pagesLTS@BBi%
+    \relax%
+  \else%
+    \ifx\pagesLTS@AlphMulti\pagesLTS@zero%
+      \PackageWarningNoLine{pagesLTS}{\pagesLTS@messageAMiz }%
+    \else%
+      \PackageError{pagesLTS}{Unknown option value}%
+        {The pagesLTS package was used with option\MessageBreak%
+         AlphMulti= \pagesLTS@AlphMulti . Only values\MessageBreak%
+         AB, BB, and 0 (zero) are valid.\MessageBreak%
+         The default AB is set.\MessageBreak%
+         For details please see the documentation!\MessageBreak%
+        }%
+      \setkeys{pagesLTS}{AlphMulti=AB}%
+    \fi%
+  \fi%
+\fi%
+
+%    \end{macrocode}
+%
+% For the roman page numbering scheme, it is just the
+% choice of an extension by \textsf{pagesLTS} or not.
+%
+%    \begin{macrocode}
+\ifpagesLTS@romanMult%
+  \PackageInfo{pagesLTS}{Option romanMult enabled\MessageBreak%
+    (maybe by default):\MessageBreak%
+    The pagesLTS package will extend the page numbering\MessageBreak%
+    of the roman scheme below i with\MessageBreak%
+     0, -i, -ii, -iii, -iv,...\MessageBreak%
+    If you do not want this, call pagesLTS with option\MessageBreak%
+    romanMult=false.\MessageBreak%
+  }%
+\else%
+  \PackageWarningNoLine{pagesLTS}{Option romanMult is set to false:\MessageBreak%
+  The pagesLTS package was used, but the option\MessageBreak%
+  romanMult was set to false.\MessageBreak%
+  If you want the page numbering of the roman scheme\MessageBreak%
+  to be extended below i,\MessageBreak%
+  please call pagesLTS with option romanMult=true,\MessageBreak%
+  otherwise zero and negative page numbers of the\MessageBreak%
+  roman scheme will need to be defined otherwise.\MessageBreak%
+  For details please see the documentation!\MessageBreak%
+  }%
+\fi%
+
+%    \end{macrocode}
+%
+% Same for the Roman page numbering scheme.
+%
+%    \begin{macrocode}
+\ifpagesLTS@RomanMulti%
+  \PackageInfo{pagesLTS}{Option RomanMulti enabled\MessageBreak%
+    (maybe by default):\MessageBreak%
+    The pagesLTS package will extend the page numbering\MessageBreak%
+    of the Roman scheme below I with\MessageBreak%
+    0, -I, -II, -III, -IV,...\MessageBreak%
+    If you do not want this, call pagesLTS with option\MessageBreak%
+    RomanMulti=false.\MessageBreak%
+  }%
+\else%
+  \PackageWarningNoLine{pagesLTS}{Option RomanMulti is set to false:\MessageBreak%
+  The pagesLTS package was used, but the option\MessageBreak%
+  RomanMulti was set to false.\MessageBreak%
+  If you want the page numbering of the Roman scheme\MessageBreak%
+  to be extended below i,\MessageBreak%
+  please call pagesLTS with option RomanMulti=true,\MessageBreak%
+  otherwise zero and negative page numbers of the\MessageBreak%
+  Roman scheme will need to be defined otherwise.\MessageBreak%
+  For details please see the documentation!\MessageBreak%
+  }%
+\fi%
+
+%    \end{macrocode}
+%
+% For the footnotesymbol page numbering scheme, it is also
+% just the choice of a extension by \textsf{pagesLTS} or not.
+%
+%    \begin{macrocode}
+\ifpagesLTS@fnsymbolmult%
+  \PackageInfo{pagesLTS}{Option fnsymbolmult enabled\MessageBreak%
+    (maybe by default):\MessageBreak%
+    The pagesLTS package will extend the page numbering\MessageBreak%
+    of the footnotesymbol scheme using the AlphAlph\MessageBreak%
+    package.\MessageBreak%
+    If you do not want this, call pagesLTS with option\MessageBreak%
+    fnsymbolmult=false.\MessageBreak%
+  }%
+\else%
+  \PackageWarningNoLine{pagesLTS}{\pagesLTS@messagefsmz }%
+\fi%
+
+%    \end{macrocode}
+%
+% Now defining some variables, place-holders, and abbreviations:
+%
+%    \begin{macrocode}
+\def\pagesLTS@pnc{0}
+\def\pagesLTS@called{0}
+\def\pagesLTS@fns{fnsymbol}
+\def\pagesLTS@alph{alph}
+\def\pagesLTS@Alph{Alph}
+\def\pagesLTS@AlphAlph{0}
+\def\pagesLTS@hyper{0}
+\def\pagesLTS@rerun{0}
+\def\pagesLTS@eso{0}
+\def\pagesLTS@esov{0}
+\def\lastpageref{\lastpagereftxt}
+%    \end{macrocode}
+%
+% \newpage
+%
+%    \begin{macrocode}
+\def\pagesLTS@messageNPN{%
+ The pagesLTS package was used, but\MessageBreak%
+ \textbackslash pagenumbering\MessageBreak%
+ was not called at the beginning of the document\MessageBreak%
+ (maybe earlier or later).\MessageBreak%
+ Please use \textbackslash pagenumbering\MessageBreak%
+ (with an argument like arabic, roman, Roman,\MessageBreak%
+ fnsymbol, alph, or Alph) at the beginning\MessageBreak%
+ of your document! Otherwise your document\MessageBreak%
+ will probably compile, but the pagesLTS\MessageBreak%
+ package might not be able to get all labels\MessageBreak%
+ for the references to the respective pages\MessageBreak%
+ right.\MessageBreak%
+ }
+
+%    \end{macrocode}
+%
+% \begin{macro}{\pagenumbering}
+% \indent \qquad To keep the original meaning of |\pagenumbering|:
+%
+%    \begin{macrocode}
+\let\OrigPagenumbering\pagenumbering
+
+%    \end{macrocode}
+% \end{macro}
+%
+% Defining some new counters (and doing related things):
+%
+%    \begin{macrocode}
+\newcounter{CurrentPage}
+\setcounter{CurrentPage}{1}
+\def\theCurrentPageLocal{\arabic{pagesLTS.current.local.\pagesLTS@pnc}}
+%    \end{macrocode}
+%
+% The counter |pagesLTS.pagenr| is for saving the total page
+% number of the last page in the \xfile{.aux} file.
+%
+%    \begin{macrocode}
+\newcounter{pagesLTS.pagenr}
+%    \end{macrocode}
+%
+% The |pagesLTS.fnsymbol| and |pagesLTS.fnsymbol.local| need to
+% already have been defined when they are used.
+%
+%    \begin{macrocode}
+\newcounter{pagesLTS.fnsymbol}
+\newcounter{pagesLTS.fnsymbol.local}
+%    \end{macrocode}
+%
+% The counter |pagesLTS.fnsymbol.cont| is for the number of pages
+% with \textsf{fnsymbol} page numbering scheme which have been
+% put out at the time the value of the counter is read.
+%
+%    \begin{macrocode}
+\newcounter{pagesLTS.fnsymbol.cont}
+%    \end{macrocode}
+%
+% While generally
+% |\pagesLTS@ifcounter{pagesLTS.double.\pagesLTS@pnc}|
+% is used, for the beginning of the document \linebreak
+%|pagesLTS.double.0| is predefined.
+% (A~|\pagesLTS@ifcounter{pagesLTS.double.\pagesLTS@pnc}|
+% could be used for this, too, but we know that |pagesLTS.double.0|
+% was not defined, so we can just do the definition here.)
+%
+%    \begin{macrocode}
+\newcounter{pagesLTS.double.0}
+%    \end{macrocode}
+%
+% The same holds for |pagesLTS.current.local.0|,
+% and the first local page gets the number one.
+%
+%    \begin{macrocode}
+\newcounter{pagesLTS.current.local.0}
+\setcounter{pagesLTS.current.local.0}{1}
+%    \end{macrocode}
+%
+% And the same again for |pagesLTS.pnc.0|.
+%
+%    \begin{macrocode}
+\newcounter{pagesLTS.pnc.0}
+
+%    \end{macrocode}
+%
+% \DescribeMacro{\xroman}\label{xroman}
+% When |\roman{...}| is used with a value $<1$, \LaTeX\ just ignores this
+% (see subsection~\ref{ss:overflow}). Here we provide a command
+% |\xroman{...}| \nolinebreak{(e\textbf{x}panded} roman),
+% which gives the usual |\roman| numbers (i, ii, iii, iv,\ldots)
+% for positive values,
+% $-\left\vert \ldots \right\vert $ (i.\,e. -i, -ii, -iii, -iv,\ldots)
+% for negative values, and 0 for all other values (which should be zero).
+%
+%    \begin{macrocode}
+\newcommand{\xroman}[1]{%
+  \ifnum\value{#1}>0 %
+    \roman{#1}%
+  \else%
+    \ifnum\value{#1}<0 %
+%    \end{macrocode}
+%
+% |\arabic{#1}| gives the arabic number of argument |#1|,
+% which is negative here (for example $-7$),
+% \textquotedblleft |-|\textquotedblright\ puts another minus
+% sign in front of it (for example $--7$), |\number| removes
+% all unnecessary preceding zeros, plus and minus signs
+% (for example $7$), |\romannumeral| turns it into a |roman|
+% number (for example vii), and
+% \textquotedblleft |-|\textquotedblright\ puts the minus
+% sign back in front of it (for example -vii).
+%
+%    \begin{macrocode}
+      -\romannumeral\number-\arabic{#1}
+    \else%
+      0%
+    \fi%
+  \fi%
+  }
+
+%    \end{macrocode}
+%
+% \DescribeMacro{\XXRoman}
+% |\XXRoman| does the same for uppercase |\Roman| numbers.
+% |-\uppercase{\romannumeral\number-\arabic{#1}}| cannot be used,
+% because the result in the example is |-\uppercase{vii}| and
+% not |-VII|.\footnote{This does not matter for the print out,%
+%  but for the display of the logical page numbers%
+%  as well as the \xfile{aux} file.} Therefore we have a look
+% at \LaTeX's own |\@Roman\FOOcounter|,\\
+% |\def\@Roman#1{\expandafter\@slowromancap\romannumeral #1@}|,\\
+% and use |\@slowromancap|, which is a fully expandable macro,
+% to do the trick for this: \textquotedblleft
+% \begin{quote}
+%\begin{verbatim}
+%\def\@slowromancap#1{\ifx @#1% then terminate
+%\else
+%\if i#1I\else\if v#1V\else\if x#1X\else\if l#1L\else\if
+%c#1C\else\if d#1D\else \if m#1M\else#1\fi\fi\fi\fi\fi\fi\fi
+%\expandafter\@slowromancap
+%\fi
+%}
+%\end{verbatim}
+% \end{quote}
+% \textquotedblright\ (1998/05/16 Version v1.1g LaTeX Kernel File~m
+% ltcounts.dtx 105 Counters and Lengths).
+%
+%    \begin{macrocode}
+\newcommand{\XXRoman}[1]{%
+  \ifnum\value{#1}>0 %
+    \Roman{#1}%
+  \else%
+    \ifnum\value{#1}<0 %
+      -\expandafter\@slowromancap\romannumeral\number-\arabic{#1}@%
+    \else%
+      0%
+    \fi%
+  \fi%
+  }
+
+%    \end{macrocode}
+%
+% \DescribeMacro{\lastpages}
+% We provide a command to give the number of pages in a sector
+% of a split page numbering scheme (see page~\pageref{pagesLTS.pnscheme.nr},\\
+% |pagesLTS.<page numbering scheme>.<number>.local.cnt|):
+%
+%    \begin{macrocode}
+\newcommand{\lastpages}[2]{%
+  \@ifundefined{c@pagesLTS.#1.#2.local.cnt}{%
+    \newcounter{pagesLTS.#1.#2.local.cnt}}{\relax}%
+  \arabic{pagesLTS.#1.#2.local.cnt}%
+  }
+
+%    \end{macrocode}
+%
+% \DescribeMacro{\pagesLTS@ifcounter}
+% We provide a way to create counters like
+% \begin{itemize}
+% \item[-] \DescribeMacro{pagesLTS.pnc. page numbering scheme }
+%   |pagesLTS.pnc.<page numbering scheme>|, e.\,g. |pagesLTS.pnc.Roman|,
+% \item[-] \DescribeMacro{pagesLTS.double. page numbering scheme }
+%   |pagesLTS.double.<page numbering scheme>|, e.\,g. |pagesLTS.double.Roman|,
+% \item[-] \DescribeMacro{PageCurrentLocal. page numbering scheme }
+%   |PageCurrentLocal.<page numbering scheme>|, e.\,g. |PageCurrentLocal.Roman|,
+% \end{itemize}
+% for all page numbering schemes, even those not supported
+% by the current original |\pagenumbering|
+% (1994/05/19 v1.1a LaTeX Kernel File w ltpageno.dtx 52 Page Numbering),
+% which is defined as\\
+% \begin{quote}
+%\begin{verbatim}
+%\countdef\c@page=0 \c@page=1
+%\def\cl@page{}
+%\def\pagenumbering#1{%
+%  \global\c@page \@ne \gdef\thepage{\csname @#1\endcsname
+%   \c@page}}
+%\end{verbatim}
+% \end{quote}
+%
+%    \begin{macrocode}
+\newcommand{\pagesLTS@ifcounter}[1]{%
+  \@ifundefined{c@#1}{\newcounter{#1}}{\relax}%
+  }
+
+%    \end{macrocode}
+%
+% \begin{macro}{\pagesLTS@writelabel}
+% \indent At last defining the writing of a label:
+%
+%    \begin{macrocode}
+\newcommand{\pagesLTS@writelabel}[1]{%
+  \addtocounter{page}{+1}%
+%    \end{macrocode}
+%
+% \noindent |\addtocounter{page}{+1}| because |\pagesLTS@putlabel| includes an\\
+% |\addtocounter{page}{-1}|, which is not necessary here.\\
+% Into the \xfile{.aux} file something like\\
+% |\newlabel{pagesLTS.Roman}{{}{VIII}{}{page.VIII}{}}|\\
+% is written, thus |\lastpageref{pagesLTS.Roman}| prints |VIII| and
+% links to |page.VIII|.
+%
+%    \begin{macrocode}
+  \pagesLTS@putlabel{pagesLTS.#1}{\thepage}
+  \addtocounter{page}{-1}%
+  \ifx\pagesLTS@pnc\pagesLTS@zero%
+    \relax%
+%    \end{macrocode}
+%
+% i.\,e. if the current page numbering scheme is
+% \textquotedblleft 0\textquotedblright, i.\,e. before the first
+% |\pagenumbering{...}| command, do nothing,
+%
+%    \begin{macrocode}
+  \else%
+    \addtocounter{page}{+1}%
+    \pagesLTS@putlabel{pagesLTS.#1.local}{\theCurrentPageLocal}
+%    \end{macrocode}
+%
+% otherwise write into the \xfile{.aux} file something like\\
+% |\newlabel{pagesLTS.arabic.local}{{}{5}{}{page.8}{}}|,\\
+% thus |\lastpageref{pagesLTS.arabic.local}| prints |5| and
+% links to |page.8|. Here (and in the example file) it is not
+% \textquotedblleft print |8| and link to |page.8|\textquotedblright ,
+% because |\addtocounter{page}{3}| has been used, thus the page with
+% \textquotedblleft number\textquotedblright\ (name) |8| is the
+% \textbf{fifth} $(=8-3)$ page.
+%
+%    \begin{macrocode}
+    \addtocounter{page}{-1}%
+  \fi%
+  }
+
+%    \end{macrocode}
+% \end{macro}
+%
+% \begin{macro}{\erroralphalph}
+% \indent |\erroralphalph| extends the
+% \textquotedblleft numbers\textquotedblright\ of counters
+% to zero and negative values for representations usually
+% not supporting this: |\alphalph|, |\AlphAlph|, and
+% |\fnsymbolmult| of the \textsf{alphalph} package.\\
+% |\alph|, |\Alph|, and |\fnsymbol| would not support
+% \textquotedblleft numbers\textquotedblright\ below one.\\
+% |\arabic| already supports negative numbers and zero.\\
+% |\roman| and |\Roman| support neither negative numbers
+% nor zero, but are expanded in this package
+% (|\xroman| and |\XXRoman|), see page~\pageref{xroman}.\\
+%
+%    \begin{macrocode}
+
+%% The following code is from Heiko Oberdiek [2010/04/18],     %%
+%% expanding his alphalph package [2010/04/18] v2.3. (Thanks!) %%
+\newcommand*{\erroralphalph}[2]{%
+  \ifnum\value{#2}>0 %
+    #1{\value{#2}}%
+  \else
+    \ifnum\value{#2}<0 %
+      -#1{\expandafter\@gobble\the\value{#2}}%
+    \else
+      0%
+    \fi
+  \fi
+  }
+%% End of code from Heiko Oberdiek                             %%
+%% Check and Error/Warning messages have been moved to         %%
+%% \EveryShipout, because messages inside e. g. the \pageref   %%
+%% command can cause trouble.                                  %%
+
+%    \end{macrocode}
+% \end{macro}
+%
+% \begin{macro}{\expandPagenumbering}
+% \indent Here the |\erroralphalph| command is called with the
+% appropriate arguments for each page numbering scheme.
+%
+%    \begin{macrocode}
+
+\newcommand{\expandPagenumbering}[1]{%
+  \let\Origthepage\thepage%
+  \def\pagesLTS@tmpC{arabic}%
+  \ifx\pagesLTS@pnc\pagesLTS@tmpC%
+    \relax%
+%    \end{macrocode}
+%
+% |\arabic| already supports negative numbers and zero
+% (|-MAX...MAX|, where |MAX|\,$ = 2\,147\,483\,647$).
+%
+%    \begin{macrocode}
+  \else%
+    \def\pagesLTS@tmpC{roman}%
+    \ifx\pagesLTS@pnc\pagesLTS@tmpC%
+      \ifpagesLTS@romanMult%
+%    \end{macrocode}
+%
+% |\erroralphalph{\roman}{page}| cannot be used, because
+% |-\roman{\expandafter\@gobble\the\value{page}}| does not work.
+% If option |romanMult| is not false,
+% |\xroman| (see page~\pageref{xroman}) expands the usable
+% roman page numbers to values below 1 (i, I, respectively),
+% see subsubsection~\ref{sss:romanMult}.
+%
+%    \begin{macrocode}
+        \renewcommand*{\thepage}{\xroman{page}}%
+      \fi%
+    \else%
+      \def\pagesLTS@tmpC{Roman}%
+      \ifx\pagesLTS@pnc\pagesLTS@tmpC%
+        \ifpagesLTS@RomanMulti%
+%    \end{macrocode}
+%
+% The same for |\Roman| page numbering, expanded by |\XXRoman|
+% (see page~\pageref{xroman}).
+%
+%    \begin{macrocode}
+          \renewcommand*{\thepage}{\XXRoman{page}}%
+        \fi%
+      \else%
+        \ifx\pagesLTS@pnc\pagesLTS@alph%
+%    \end{macrocode}
+%
+% |\alph| and |\Alph| page numberings are expanded to negative
+% and zero values, and to values greater than
+% \textquotedblleft z\textquotedblright\ or
+% \textquotedblleft Z\textquotedblright\ with the
+% \textsf{alphalph} package. --
+% If |\pagesLTS@alphMult| was zero, nothing is done.
+%
+%    \begin{macrocode}
+          \ifx\pagesLTS@alphMult\pagesLTS@ab%
+            \renewcommand*{\thepage}{\erroralphalph{\alphalph}{page}}%
+          \else \ifx\pagesLTS@alphMult\pagesLTS@bb%
+                  \renewcommand*{\thepage}{\erroralphalph{\alphMult}{page}}%
+                \fi%
+          \fi%
+        \else%
+          \ifx\pagesLTS@pnc\pagesLTS@Alph%
+            \ifx\pagesLTS@AlphMulti\pagesLTS@ABi%
+              \renewcommand*{\thepage}{\erroralphalph{\AlphAlph}{page}}%
+            \else \ifx\pagesLTS@AlphMulti\pagesLTS@BBi%
+                    \renewcommand*{\thepage}{\erroralphalph{\AlphMult}{page}}%
+                  \fi%
+            \fi%
+          \else%
+            \ifx\pagesLTS@pnc\pagesLTS@fns%
+%    \end{macrocode}
+%
+% Same for |\fnsymbol| page numbers.
+%
+%    \begin{macrocode}
+              \ifpagesLTS@fnsymbolmult%
+                \renewcommand*{\thepage}{\erroralphalph{\fnsymbolmult}{page}}%
+              \fi%
+            \else%
+%    \end{macrocode}
+%
+% If the used page numbering scheme has not been recognized by the
+% \textsf{pagesLTS} package so far, we can do nothing, and problems
+% might result.\\
+%
+%    \begin{macrocode}
+              \PackageError{pagesLTS}{unknown page numbering scheme}{%
+                The pagesLTS package encountered the unknown\MessageBreak%
+                page numbering scheme\MessageBreak%
+                `#1'. \MessageBreak%
+                If this is no typing mistake, it might work\MessageBreak%
+                - or it might not work.\MessageBreak%
+                \@ehc%
+                }
+            \fi%
+          \fi%
+        \fi%
+      \fi%
+    \fi%
+  \fi%
+  \let\pagesLTS@tmpC\undefined%
+  }
+
+%    \end{macrocode}
+% \end{macro}
+%
+% \pagebreak
+% \begin{macro}{\pagenumbering}
+% \indent Now for the \textbf{new} version of the |\pagenumbering| command:
+%
+%    \begin{macrocode}
+\renewcommand{\pagenumbering}[1]{%
+%    \end{macrocode}
+%
+% If the current page numbering scheme, |\pagesLTS@pnc|, and the
+% requested page numbering scheme, |#1|, is the same one, nothing
+% is done, otherwise the real action begins.
+%
+%    \begin{macrocode}
+  \edef\pagesLTS@tmpA{#1}%
+  \ifx\pagesLTS@pnc\pagesLTS@tmpA%
+    \relax%
+  \else%
+%    \end{macrocode}
+%
+% The next code is executed, when we are at a page after the first one.
+% This distinction is done for two reasons:\\
+% On the one hand, |\pagenumbering| could be called \textit{before}
+% |\begin{document}| (where the current page should not be
+% greater than one), and on the other hand we go one page back to
+% aim all references to that page. Obviousely at the first page
+% there is no going backward.
+%
+%    \begin{macrocode}
+    \ifnum \value{CurrentPage}>1%
+      \addtocounter{page}{-1}%
+      \addtocounter{pagesLTS.current.local.\pagesLTS@pnc}{-1}%
+%    \end{macrocode}
+%
+% For the case that the page numbering scheme is or will be splitted,
+% like e.\,g. the Roman one in the |pagesLTS-example.tex|, a counter
+% like
+% |pagesLTS.Roman.1.local.count|
+% (or |pagesLTS.Roman.2.local.count|,
+% |pagesLTS.Roman.3.local.count|,\ldots ) is introduced and set to the
+% number of the local page.
+%
+%    \begin{macrocode}
+      \newcounter{pagesLTS.\pagesLTS@pnc.\arabic{pagesLTS.pnc.\pagesLTS@pnc}.local.count}%
+      \setcounter{pagesLTS.\pagesLTS@pnc.\arabic{pagesLTS.pnc.\pagesLTS@pnc}.local.count}{%
+        \value{pagesLTS.current.local.\pagesLTS@pnc}}%
+%    \end{macrocode}
+%
+% If the page numbering scheme is \textsf{fnsymbol},
+% and if it \textit{was} used before,
+% from said counter the number of pages of the preceding uses
+% of the same page numbering scheme, |pagesLTS.\pagesLTS@pnc.done|,
+% is subtracted (same as for the other schemes, see below):
+%
+%    \begin{macrocode}
+      \ifx\pagesLTS@pnc\pagesLTS@fns%
+        \ifnum \value{pagesLTS.pnc.\pagesLTS@pnc}>1%
+          \pagesLTS@ifcounter{pagesLTS.tmpa}%
+          \setcounter{pagesLTS.tmpa}{\value{pagesLTS.pnc.\pagesLTS@pnc}}%
+          \addtocounter{pagesLTS.tmpa}{-1}%
+          \pagesLTS@ifcounter{pagesLTS.tmpb}%
+          \addtocounter{pagesLTS.tmpb}{\value{pagesLTS.\pagesLTS@pnc.\arabic{pagesLTS.tmpa}.local.count}}%
+          \addtocounter{pagesLTS.\pagesLTS@pnc.\arabic{pagesLTS.pnc.\pagesLTS@pnc}.local.count}{%
+            -\value{pagesLTS.tmpb}}%
+        \fi%
+%    \end{macrocode}
+%
+% If the page numbering scheme is \textit{not} \textsf{fnsymbol},
+% a numbered label is written:
+%
+%    \begin{macrocode}
+      \else%
+        \pagesLTS@writelabel{\pagesLTS@pnc.\arabic{pagesLTS.pnc.\pagesLTS@pnc}}%
+%    \end{macrocode}
+%
+% If the page numbering scheme was \textit{not} used before,
+%
+%    \begin{macrocode}
+        \ifnum \value{pagesLTS.pnc.\pagesLTS@pnc}<2%
+%    \end{macrocode}
+%
+% an unnumbered label is also written:
+%
+%    \begin{macrocode}
+          \pagesLTS@writelabel{\pagesLTS@pnc}%
+%    \end{macrocode}
+%
+% If the page numbering scheme \textit{was} used before,
+% from said counter the number of pages of the preceding uses
+% of the same page numbering scheme, |pagesLTS.\pagesLTS@pnc.done|,
+% is subtracted.
+%
+%    \begin{macrocode}
+        \else%
+          \pagesLTS@ifcounter{pagesLTS.tmpa}%
+          \setcounter{pagesLTS.tmpa}{\value{pagesLTS.pnc.\pagesLTS@pnc}}%
+          \addtocounter{pagesLTS.tmpa}{-1}%
+          \pagesLTS@ifcounter{pagesLTS.\pagesLTS@pnc.done}%
+          \addtocounter{pagesLTS.\pagesLTS@pnc.done}{%
+            \value{pagesLTS.\pagesLTS@pnc.\arabic{pagesLTS.tmpa}.local.count}}%
+          \addtocounter{pagesLTS.\pagesLTS@pnc.\arabic{pagesLTS.pnc.\pagesLTS@pnc}.local.count}{%
+            -\value{pagesLTS.\pagesLTS@pnc.done}}%
+        \fi%
+%    \end{macrocode}
+%
+% The values are written to the \xfile{.aux} file
+% (if writing is allowed: |\if@filesw|),
+% because they must be available at the beginning of the document:
+%
+%    \begin{macrocode}
+        \if@filesw%
+          \immediate\write\@auxout{\string
+            \pagesLTS@ifcounter{pagesLTS.\pagesLTS@pnc.\arabic{pagesLTS.pnc.\pagesLTS@pnc}.local.cnt}}%
+        \fi%
+        \edef\pagesLTS@tmpB{\arabic{pagesLTS.\pagesLTS@pnc.\arabic{pagesLTS.pnc.\pagesLTS@pnc}.local.count}}%
+        \if@filesw%
+          \immediate\write\@auxout{\string
+            \setcounter{pagesLTS.\pagesLTS@pnc.\arabic{pagesLTS.pnc.\pagesLTS@pnc}.local.cnt}{\pagesLTS@tmpB}}%
+        \fi%
+      \fi%
+%    \end{macrocode}
+%
+% For further code for the case of \textsf{fnsymbol} please see below
+% (|\lastpagereftxt|, page~\pageref{lastpagereftxtlabel}).\\
+% The last page number is saved, in case the same page
+% numbering scheme is continued later:
+%
+%    \begin{macrocode}
+      \setcounter{pagesLTS.double.\pagesLTS@pnc}{\value{page}}%
+%    \end{macrocode}
+%
+% We went back one page, so we must go forward again:
+%
+%    \begin{macrocode}
+      \addtocounter{pagesLTS.current.local.\pagesLTS@pnc}{+1}%
+      \addtocounter{page}{+1}%
+%    \end{macrocode}
+%
+% The page numbering scheme |\pagesLTS@pnc| is now set to
+% the new one, given by the user as argument with the
+% |\pagenumbering{...}| command:
+%
+%    \begin{macrocode}
+      \global\edef\pagesLTS@pnc{#1}%
+%    \end{macrocode}
+%
+% The new page numbering scheme is now started for real:
+%
+%    \begin{macrocode}
+      \OrigPagenumbering{#1}%
+%    \end{macrocode}
+%
+% If a page numbering scheme not known by the original
+% |\pagenumbering{...}| command is used, an error will
+% arise here - but maybe without error message.\\
+%
+% If page numbering schem |\alph|, |\Alph|, or |\fnsymbol| is used,
+% \textsf{pagesLTS} extends the page numbers according to
+% the given options, using the \textsf{AlphAlph} package.
+% |\arabic| does not need any expansion.
+% |\roman| and |\Roman| at least receive a definition for
+% zero.
+%
+%    \begin{macrocode}
+      \expandPagenumbering{#1}
+%    \end{macrocode}
+%
+% Counters like |pagesLTS.pnc.Roman| are introduced:
+%
+%    \begin{macrocode}
+      \pagesLTS@ifcounter{pagesLTS.pnc.\pagesLTS@pnc}%
+%    \end{macrocode}
+%
+% The saved number of times this page numbering scheme was used
+% is increased by one:
+%
+%    \begin{macrocode}
+      \addtocounter{pagesLTS.pnc.\pagesLTS@pnc}{1}%
+%    \end{macrocode}
+%
+% \indent Now defining the counter |pagesLTS.double.\pagesLTS@pnc|,
+% if it did not exist already, adding~1, because this is
+% the first page of it (or another one, if the scheme is
+% continued):
+%
+%    \begin{macrocode}
+      \pagesLTS@ifcounter{pagesLTS.double.\pagesLTS@pnc}%
+      \addtocounter{pagesLTS.double.\pagesLTS@pnc}{1}%
+%    \end{macrocode}
+%
+% The page number is continued, if the option |pagecontinue=false|
+% is \textbf{not} set, otherwise it is reset to one. Note that neither
+% the local nor the current counter are reset, as they contain
+% the real \textit{values} and not the \textit{names} of the pages.
+%
+%    \begin{macrocode}
+      \ifpagesLTS@pagecontinue%
+        \setcounter{page}{\value{pagesLTS.double.\pagesLTS@pnc}}%
+      \else%
+        \setcounter{page}{1}%
+      \fi%
+%    \end{macrocode}
+%
+% If it does not exist already, the counter
+% |pagesLTS.current.local.\pagesLTS@pnc|
+% (e.\,g. |pagesLTS.current.local.Roman|) is created.
+%
+%    \begin{macrocode}
+      \pagesLTS@ifcounter{pagesLTS.current.local.\pagesLTS@pnc}%
+%    \end{macrocode}
+%
+% If |pagesLTS.double.\pagesLTS@pnc| of the current page numbering
+% scheme is equal to one, this is the first page of this page
+% numbering scheme. Then |pagesLTS.current.local.\pagesLTS@pnc|
+% (which was zero) is set to one.
+%
+%    \begin{macrocode}
+      \ifnum \value{pagesLTS.double.\pagesLTS@pnc}=1%
+        \setcounter{pagesLTS.current.local.\pagesLTS@pnc}{1}%
+      \fi%
+%    \end{macrocode}
+%
+% Otherwise, i.\,e. if |\value{CurrentPage}| is not |>1|,
+% i.\,e. before the first page has shiped out:
+%
+%    \begin{macrocode}
+    \else%
+      %% before the first page has shiped out
+%    \end{macrocode}
+%
+% The current page numbering scheme is defined by the
+% argument of |\pagenumbering{...}|, which the user gave:
+%
+%    \begin{macrocode}
+      \global\edef\pagesLTS@pnc{#1}%
+%    \end{macrocode}
+%
+% \noindent and the page numbering scheme set by the original
+% page numbering command
+% (1994/05/19 v1.1a LaTeX Kernel File w ltpageno.dtx 52 Page Numbering),
+% which resets the page number to one,
+% but at the first page continuation does not make sense).
+% Well, nearly the original page numbering command:
+% |\OrigPagenumbering{\pagesLTS@pnc}| does not work,
+% so we \textquotedblleft expand\textquotedblright\ the
+% |\OrigPagenumbering| command:
+%
+%    \begin{macrocode}
+      \countdef\c@page=0 \c@page=1
+      \def\cl@page{}
+      \global\c@page \@ne
+      \global\def\thepage{\csname \expandafter @\pagesLTS@pnc \endcsname \c@page}%
+%    \end{macrocode}
+%
+% If a page numbering scheme is used, which is not known by
+% \LaTeX, an error might arise here - but maybe without error message.\\
+%
+% If page numbering scheme |\alph|, |\Alph|, or |\fnsymbol| is used,
+% \textsf{pagesLTS} extends the page numbers according to
+% the given options, using the \textsf{AlphAlph} package.
+% |\arabic| does not need any expansion.
+% |\roman| and |\Roman| at least receive a definition for
+% zero.
+%
+%    \begin{macrocode}
+      \expandPagenumbering{#1}
+%    \end{macrocode}
+%
+% We are at the first page, so the page counters are set to one:
+%
+%    \begin{macrocode}
+      \pagesLTS@ifcounter{pagesLTS.pnc.\pagesLTS@pnc}%
+      \setcounter{pagesLTS.pnc.\pagesLTS@pnc}{1}%
+      \pagesLTS@ifcounter{pagesLTS.double.\pagesLTS@pnc}%
+      \setcounter{pagesLTS.double.\pagesLTS@pnc}{1}%
+      \pagesLTS@ifcounter{pagesLTS.current.local.\pagesLTS@pnc}%
+      \setcounter{pagesLTS.current.local.\pagesLTS@pnc}{1}%
+    \fi%
+%    \end{macrocode}
+%
+% Whether |\pagenumbering{...}| is called in the preamble,
+% |\AtBeginDocument|, right after |\begin{document}|,
+% or somewhere in the document, we want to remember
+% \textit{whether} it was called at all:
+%
+%    \begin{macrocode}
+    \gdef\pagesLTS@called{1}%
+  \fi%
+%    \end{macrocode}
+%
+% We do not need the temporary definitions any more.
+%
+%    \begin{macrocode}
+  \let\pagesLTS@tmpA\undefined%
+  \let\pagesLTS@tmpB\undefined%
+  }
+
+%    \end{macrocode}
+% \end{macro}
+%
+% \phantomsection
+% \begin{macro}{\lastpagereftxt} \label{lastpagereftxtlabel}
+% \indent When |\lastpageref| is used somewhere inside the \texttt{txt} (text),
+% i.\,e. not at the last page, it is defined as |\lastpagereftxt|.
+% When the page numbering scheme is \textsf{fnsymbol}, and the \textsf{hyperref}
+% package has been loaded, a hyperref instead of a label is used
+% for the reference to\\
+% |pagesLTS.fnsymbol.local.\arabic{pagesLTS.fnsymbol.local}|.\\
+%
+%    \begin{macrocode}
+\newcommand{\lastpagereftxt}[1]{%
+  \def\pagesLTS@tmpA{#1}%
+  \def\pagesLTS@tmpB{pagesLTS.fnsymbol.local}%
+  \ifx\pagesLTS@tmpA\pagesLTS@tmpB%
+    \ifx\pagesLTS@hyper\pagesLTS@one%
+      \href{\#pagesLTS.fnsymbol.local.\arabic{pagesLTS.fnsymbol.local}}%
+        {\arabic{pagesLTS.fnsymbol.local}}%
+%    \end{macrocode}
+%
+% When the page numbering scheme is \textsf{fnsymbol}, but the \textsf{hyperref} package
+% has \textit{not} been loaded, just the arabic number of the
+% \texttt{pagesLTS.fnsymbol.local} counter is given (because there will be
+% no hyperlink anyway).
+%
+%    \begin{macrocode}
+    \else \arabic{pagesLTS.fnsymbol.local}%
+    \fi%
+%    \end{macrocode}
+%
+% Otherwise just the common |\pageref| is applied:
+%
+%    \begin{macrocode}
+  \else%
+    \pageref{#1}%
+  \fi%
+%    \end{macrocode}
+%
+% We do not need the temporary definitions any more.
+%
+%    \begin{macrocode}
+  \let\pagesLTS@tmpA\undefined%
+  \let\pagesLTS@tmpB\undefined%
+  }
+
+%    \end{macrocode}
+% \end{macro}
+%
+% \begin{macro}{\lastpagerefend}
+% \indent When the \textsf{hyperref} package is used and the page numbering scheme
+% of the last page is \textsf{fnsymbol}, |\lastpageref| is defined as
+% |\lastpagerefend|.
+% Hyperrefs instead of labels are used for the reference to
+% \textsf{fnsymbol} pages (including the last one).
+%
+%    \begin{macrocode}
+\newcommand{\lastpagerefend}[1]{%
+  \def\pagesLTS@tmpA{#1}%
+  \def\pagesLTS@tmpB{pagesLTS.fnsymbol.local}%
+  \ifx\pagesLTS@tmpA\pagesLTS@tmpB%
+    \ifx\pagesLTS@hyper\pagesLTS@one%
+      \href{\#pagesLTS.fnsymbol.local.\arabic{pagesLTS.fnsymbol.local}}%
+        {\arabic{pagesLTS.fnsymbol.local}}%
+    \else \arabic{pagesLTS.fnsymbol.local}%
+    \fi%
+  \else%
+    \def\pagesLTS@tmpB{pagesLTS.fnsymbol}%
+    \ifx\pagesLTS@tmpA\pagesLTS@tmpB%
+      \ifx\pagesLTS@hyper\pagesLTS@one%
+        \href{\#pagesLTS.fnsymbol.local.\arabic{pagesLTS.fnsymbol.local}}%
+          {\pagesLTS.lastpage}%
+      \else \pageref{pagesLTS.fnsymbol}%
+      \fi%
+    \else%
+      \def\pagesLTS@tmpB{LastPage}%
+      \ifx\pagesLTS@tmpA\pagesLTS@tmpB%
+        \ifx\pagesLTS@hyper\pagesLTS@one%
+          \href{\#pagesLTS.fnsymbol.local.\pagesLTS@eso}%
+            {\pagesLTS.lastpage}%
+        \else \pageref{LastPage}%
+        \fi%
+      \else%
+        \def\pagesLTS@tmpB{VeryLastPage}%
+        \ifx\pagesLTS@tmpA\pagesLTS@tmpB%
+          \ifx\pagesLTS@hyper\pagesLTS@one%
+            \href{\#pagesLTS.fnsymbol.local.\arabic{pagesLTS.fnsymbol.local}}%
+              {\pagesLTS.lastpage}%
+          \else \pageref{VeryLastPage}%
+          \fi%
+        \else%
+          \def\pagesLTS@tmpB{LastPages}%
+          \ifx\pagesLTS@tmpA\pagesLTS@tmpB%
+            \ifx\pagesLTS@hyper\pagesLTS@one%
+              \href{\#pagesLTS.fnsymbol.local.\arabic{pagesLTS.fnsymbol.local}}%
+                {\arabic{pagesLTS.pagenr}}%
+            \else \pageref{LastPages}%
+            \fi%
+          \else%
+            \pageref{#1}%
+          \fi%
+        \fi%
+      \fi%
+    \fi%
+  \fi%
+%    \end{macrocode}
+%
+% We do not need the temporary definitions any more.
+%
+%    \begin{macrocode}
+  \let\pagesLTS@tmpA\undefined%
+  \let\pagesLTS@tmpB\undefined%
+  }
+
+%    \end{macrocode}
+% \end{macro}
+%
+% \begin{macro}{\@pagesLTS@Prelim@EveryShipout}
+% \indent Because we cannot make references to pages with \textsf{fnsymbol}
+% page \textquotedblleft numbers\textquotedblright\ manually
+% with \textsf{hyperref}, we use \nolinebreak{|\phantomsection|\,s} and
+% refer to one of those. But because we do not know how many
+% \nolinebreak{|\phantomsection|\,s} and \nolinebreak{|\section*|\,s}
+% are introduced by the user (or other packages;
+% cf.~\LaTeX~bug~2298: knowing level of |section*|,
+% \ \url{http://www.latex-project.org/cgi-bin/ltxbugs2html?category=LaTeX&responsible=anyone&state=open&keyword=&pr=latex%2F2298&search=}),
+% we cannot refer to the last one as we did with the pages.
+%
+%    \begin{macrocode}
+\newcommand{\@pagesLTS@Prelim@EveryShipout}{%
+%% The following code is from the prelim2e package             %%
+%% [2009/05/29 v1.3] by Martin Schr\"{o}der (Thanks!):         %%
+  \bgroup
+    \dimen\z@=\wd\@cclv
+    \dimen\@ne=\ht\@cclv
+    \dimen\tw@=\dp\@cclv
+    \dimen\thr@@=\dimen1
+    \advance\dimen\thr@@ by \dimen\tw@
+    \global\setbox\@cclv\vbox to \dimen\thr@@{%
+      \hb@xt@\dimen\z@{%
+        \box\@cclv%
+        \hss%
+        }%
+      \vbox to \z@{%
+        \hb@xt@\dimen\z@{%
+          \let\protect\relax
+%% Code not from prelim2e package:                             %%
+%    \end{macrocode}
+%
+% \pagebreak
+%
+% Therefore each page with \textsf{fnsymbol} page
+% \textquotedblleft number\textquotedblright\ receives a
+% |\phantomsection| and a label, which includes a number increased
+% by one for each page. This is done for
+% |pagesLTS.fnsymbol.local.\arabic{pagesLTS.fnsymbol.cont}|
+% as well as
+% |pagesLTS.fnsymbol|, |pagesLTS.\pagesLTS@pnc|, and
+% |pagesLTS.\pagesLTS@pnc.local|.\\
+% In case an older label already existed, it is overwritten by an
+% |\overridelabel| command.
+%
+%    \begin{macrocode}
+          \ifx\pagesLTS@pnc\pagesLTS@fns%
+            \addtocounter{pagesLTS.fnsymbol.cont}{1}%
+            \ifx\pagesLTS@hyper\pagesLTS@one%
+              \phantomsection%
+              \hypertarget{pagesLTS.fnsymbol.local.\arabic{pagesLTS.fnsymbol.cont}}{}%
+            \fi%
+            \ifnum \pagesLTS@esov=\pagesLTS@zero%
+              \label{pagesLTS.fnsymbol}%
+            \else%
+              \overridelabel{pagesLTS.fnsymbol}%
+            \fi%
+          \else%
+            \ifx\pagesLTS@hyper\pagesLTS@one%
+              \phantomsection%
+            \fi%
+            \if@filesw%
+              \overridelabel{pagesLTS.\pagesLTS@pnc}%
+              \immediate\write\@auxout{\string
+                \undonewlabel{pagesLTS.\pagesLTS@pnc.local}{\on@line}}%
+            \fi%
+            \addtocounter{page}{+1}
+            \pagesLTS@putlabel{pagesLTS.\pagesLTS@pnc.local}{\theCurrentPageLocal}%
+            \addtocounter{page}{-1}
+          \fi%
+%% Code from prelim2e package again:                           %%
+        }%
+        \vss%
+      }%
+      \vss%
+    }%
+    \wd\@cclv=\dimen\z@
+    \ht\@cclv=\dimen\@ne
+    \dp\@cclv=\dimen\tw@
+  \egroup
+%% End of code from the prelim2e package.                      %%
+  }
+
+%    \end{macrocode}
+% \end{macro}
+%
+% \pagebreak
+%
+% \begin{macro}{\EveryShipout}
+% \indent At the end of each shipout, the following commands are executed:
+%
+%    \begin{macrocode}
+\EveryShipout{%
+  \ifnum\value{page}>0%
+    \relax%
+  \else
+    \ifnum\value{page}=0%
+      \PackageWarning{pagesLTS}{%
+        Counter `page' is zero!\MessageBreak%
+        If the page numbering scheme is not arabic\MessageBreak%
+        and further not extended\MessageBreak%
+        (see Page counter overflow in the pagesLTS\MessageBreak%
+        documentation), without other measures\MessageBreak%
+        this will lead to a counter overflow.\MessageBreak%
+      }
+    \else%
+      \ifnum\value{page}<0%
+        \PackageWarning{pagesLTS}{%
+          Counter `page' is negative: `\the\value{page}'!\MessageBreak%
+          If the page numbering scheme is not arabic\MessageBreak%
+          and further not extended\MessageBreak%
+          (see Page counter overflow in the pagesLTS\MessageBreak%
+          documentation), without other measures\MessageBreak%
+          this will lead to a counter overflow.\MessageBreak%
+        }
+      \else%
+        \PackageError{pagesLTS}{%
+          Counter `page' does not have a recognized value:\MessageBreak%
+          `\the\value{page}'\MessageBreak%
+          \@ehd \MessageBreak%
+          }
+      \fi%
+    \fi%
+  \fi%
+%    \end{macrocode}
+%
+% If the |CurrentPage| is equal to one, this is the first shipout.
+%
+%    \begin{macrocode}
+  \ifnum \value{CurrentPage}=1% This is the first shipout!
+%    \end{macrocode}
+%
+% We check whether some page numbering scheme was defined by
+% |\pagenumbering{...}| (\textbf{as it schould be!}):
+%
+%    \begin{macrocode}
+    \ifx\pagesLTS@called\pagesLTS@zero
+%    \end{macrocode}
+%
+% If it was not defined (i.\,e. |\pagesLTS@called| is zero),
+% the user is informed, that a |\pagenumbering{...}|
+% is missing behind |\begin{document}|.
+% Of course, it is possible that some package did some
+% pages of output with |\AtBeginDocument|. In that case,
+% one |\pagenumbering{...}| before |\begin{document}| and
+% one |\pagenumbering{...}| (with the same argument, of course!)
+% behind |\begin{document}| could help somewhat.
+%
+%    \begin{macrocode}
+      \PackageError{pagesLTS}{pagenumbering missing}{\pagesLTS@messageNPN }%
+%    \end{macrocode}
+%
+% We save the current value of the page,
+%
+%    \begin{macrocode}
+      \newcounter{pagesLTS@tmpD}%
+      \setcounter{pagesLTS@tmpD}{\value{page}}%
+%    \end{macrocode}
+%
+% determine the current page numbering scheme,
+%
+%    \begin{macrocode}
+%% Code from Andres L\"{o}h, Universiteit Utrecht (NL)         %%
+      \def\extract#1{\expandafter\extract@ #1\END}
+      \def\extract@#1\csname @#2\endcsname#3\END{#2}
+      \edef\pagesLTS@tmpQ{\extract\thepage}%
+%% End of code from Andres L\"{o}h                             %%
+      \let\pagesLTS@tmpP\pagesLTS@tmpQ%
+%    \end{macrocode}
+%
+% set the current page numbering scheme to~0
+% (because before the beginning of the document it should be~0),
+%
+%    \begin{macrocode}
+      \def\pagesLTS@pnc{0}%
+%    \end{macrocode}
+%
+% and then issue a |\pagenumbering| command with the determined
+% page numbering scheme as argument:
+%
+%    \begin{macrocode}
+      \pagenumbering{\pagesLTS@tmpP}%
+%    \end{macrocode}
+%
+% This resets the page to one (if option |pagecontinue=false|
+% was choosen), but because we do not start a new page numbering
+% scheme here but manifest a page numbering scheme, which
+% the user forgot to define, the page number should not have
+% been reset to one. (This is the first page, but maybe the user
+% wants it to have page number 2001?) Therefore we revert this here
+% and set the page number to its value, which was saved before the
+% |\pagenumbering| command.
+%
+%    \begin{macrocode}
+      \setcounter{page}{\value{pagesLTS@tmpD}}%
+    \fi%
+%    \end{macrocode}
+%
+% We are at the first page, so we put the label here.
+%
+%    \begin{macrocode}
+    \pagesLTS@writelabel{0}%
+  \fi%
+%    \end{macrocode}
+%
+% If the current page numbering scheme |\pagesLTS@pnc| is
+% |\pagesLTS@fns| (which is defined as \texttt{fnsymbol}),
+% the label is set by \linebreak
+% |\@pagesLTS@Prelim@EveryShipout| (see just above),
+% and |\pagesLTS@esov| is set to the (real) number (not the name) of
+% this page numbering scheme, |\arabic{pagesLTS.fnsymbol.cont}|.\\
+% When no more pages with \textsf{fnsymbol} page
+% \textquotedblleft number\textquotedblright\ are shiped out,
+% the value remains fixed and we have our reference to the last page
+% of the \textsf{fnsymbol} page numbering range.
+% (At least we will have that reference after some more work,
+% see below).
+%
+%    \begin{macrocode}
+  \ifx\pagesLTS@pnc\pagesLTS@fns%
+    \@pagesLTS@Prelim@EveryShipout%
+    \gdef\pagesLTS@esov{\arabic{pagesLTS.fnsymbol.cont}}%
+%    \end{macrocode}
+%
+% When another page numbering scheme was reused (in the example file
+% \textsf{Roman}), we also need to apply\\
+% |\@pagesLTS@Prelim@EveryShipout|,
+% because otherwise we would get multiply definded labels.
+%
+%    \begin{macrocode}
+  \else%
+    \ifnum \value{pagesLTS.pnc.\pagesLTS@pnc}>1%
+      \@pagesLTS@Prelim@EveryShipout%
+    \fi%
+  \fi%
+%    \end{macrocode}
+%
+% The |CurrentPage| as well as the |pagesLTS.current.local.\pagesLTS@pnc|
+% are advanced by one (because one page was shiped out and the next is
+% about to begin).
+%
+%    \begin{macrocode}
+  \addtocounter{CurrentPage}{1}%
+  \addtocounter{pagesLTS.current.local.\pagesLTS@pnc}{1}%
+  }
+
+%    \end{macrocode}
+% \end{macro}
+%
+% \begin{macro}{\pagesLTS@putlabelhyper}
+% \indent Here the labels are set, if the \textsf{hyperref} package
+% was loaded. Simply using |\label| would not work, because labels
+% wait for the output routines to work, and there may not be any
+% more invocations of the output routines. To force the write out
+% we need to do an |\immediate| write.
+%
+%    \begin{macrocode}
+\newcommand{\pagesLTS@putlabelhyper}[2]{%
+  \ifHy@pageanchor \relax%
+  \else%
+%    \end{macrocode}
+%
+% If the \textsf{hyperref} package is used, but pageanchors are disabled,
+% the hyperlinking will not work.
+%
+%    \begin{macrocode}
+    \PackageError{pagesLTS}{hyperref option pageanchor disabled}{%
+      The \string\lastpageref{#1} link doesn't work\MessageBreak%
+      using hyperref with disabled option `pageanchor'.\MessageBreak%
+    }%
+  \fi
+%    \end{macrocode}
+%
+% If use of the \xfile{.aux}-file is allowed, the label for
+% \texttt{LastPage} is written into that file, the page
+% reference depending on the options, which where set for
+% the \textsf{hyperref} package.
+%
+%    \begin{macrocode}
+%% The following code is from the hyperref package             %%
+%% [2010/04/17 v6.80x] by Heiko Oberdiek (Thanks!).            %%
+  \if@filesw
+    \begingroup
+      \let\@number\@firstofone
+      \ifHy@pageanchor
+        \ifHy@hypertexnames
+          \ifHy@plainpages
+            \def\Hy@temp{\arabic{page}}%
+          \else
+            \Hy@unicodefalse
+%% Code not from hyperref package:                             %%
+%% The following lines are modified from the hyperref package. %%
+%% Without the modification, after the first shipout "PD1" is  %%
+%% inserted each time |\pdfstringdef\Hy@temp{\thepage}| is     %%
+%% executed (if |fnsymbol| is not used).                       %%
+            \ifnum \value{CurrentPage}=1%
+              \ifx\pagesLTS@pnc\pagesLTS@fns%
+                \pdfstringdef\Hy@temp{\thepage}%
+              \else%
+                \def\Hy@temp{\thepage}%
+              \fi%
+            \else%
+              \pdfstringdef\Hy@temp{\thepage}%
+            \fi%
+%% Code from hyperref package again:                           %%
+          \fi
+        \else
+          \def\Hy@temp{\the\Hy@pagecounter}%
+        \fi
+      \fi
+%% End of code from the hyperref package.                      %%
+%% (The following four lines are modified                      %%
+%%  from the hyperref package.)                                %%
+      \immediate\write\@auxout{\string
+        \newlabel{#1}{{}{#2}{}{\ifHy@pageanchor page.\Hy@temp\fi}{}}}%
+    \endgroup%
+  \fi%
+  }
+
+%    \end{macrocode}
+% \end{macro}
+%
+% \begin{macro}{\pagesLTS@putlabel}
+% \indent Since the page has been put out, we are on the page after
+% that page. We therefore subtract one from the page counter.
+%
+%    \begin{macrocode}
+\newcommand{\pagesLTS@putlabel}[2]{%
+  \addtocounter{page}{-1}%
+%    \end{macrocode}
+%
+% If the \textsf{hyperref} package is used,
+% the format of the labels is somewhat longer.
+%
+%    \begin{macrocode}
+  \ifx\pagesLTS@hyper\pagesLTS@one%
+    \pagesLTS@putlabelhyper{#1}{#2}%
+  \else%
+%    \end{macrocode}
+%
+% If the \textsf{hyperref} package is not used,
+% there will be no hyperlinks,
+% and the label is written in the way of the
+% old \textsf{lastpage} package.
+%
+%    \begin{macrocode}
+    \if@filesw%
+      \immediate\write\@auxout{\string
+        \newlabel{#1}{{}{#2}}}%
+    \fi%
+  \fi%
+%    \end{macrocode}
+%
+% After the writeout we restore the page number again,
+% since there might be other things still to be done.
+%
+%    \begin{macrocode}
+  \addtocounter{page}{+1}%
+  }
+
+%    \end{macrocode}
+% \end{macro}
+%
+% \begin{macro}{\pagesLTS@putlabels}
+% \indent |\pagesLTS@putlabels| is nearly identical to |\pagesLTS@putlabelV|:
+%
+%    \begin{macrocode}
+\newcommand{\pagesLTS@putlabels}{%
+  \addtocounter{page}{-1}%
+  \addtocounter{CurrentPage}{-1}%
+  \addtocounter{pagesLTS.current.local.\pagesLTS@pnc}{-1}%
+%    \end{macrocode}
+%
+% If |\pagenumbering{...}| has not been used,
+% |\pagesLTS@pnc| is still zero ($0$, |\pagesLTS@zero|),
+% and the according warning message is given.
+%
+%    \begin{macrocode}
+  \ifx\pagesLTS@pnc\pagesLTS@zero%
+   \PackageWarning{pagesLTS}{No page numbering scheme found:\MessageBreak%
+     \pagesLTS@messageNPN }%
+%    \end{macrocode}
+%
+% \noindent otherwise the numbered label is written,
+% and if the page numbering scheme was not used before,
+% the unnumbered label is written, too.
+%
+%
+%    \begin{macrocode}
+  \else%
+    \pagesLTS@writelabel{\pagesLTS@pnc.\arabic{pagesLTS.pnc.\pagesLTS@pnc}}%
+    \ifnum \value{pagesLTS.pnc.\pagesLTS@pnc}<2%
+      \ifx\pagesLTS@pnc\pagesLTS@fns%
+        \relax%
+      \else%
+        \pagesLTS@writelabel{\pagesLTS@pnc}%
+      \fi%
+    \fi%
+  \fi%
+%    \end{macrocode}
+%
+% \noindent Before the label for the \texttt{LastPages} can be put,
+% we must advance one page again, because |\pagesLTS@putlabel| itself
+% goes back one page (and at its end forward again).
+%
+%    \begin{macrocode}
+  \addtocounter{page}{+1}%
+  \pagesLTS@putlabel{LastPages}{\theCurrentPage}
+%    \end{macrocode}
+%
+% \noindent Here should follow a\\
+%  |\addtocounter{page}{-1}|,\\
+% but we have to remember to increase the page counters again,
+% which were decreased at the start of this |\pagesLTS@putlabels|
+% command, and that would include\\
+%  |\addtocounter{page}{+1}|,\\
+% therefore this two lines cancel each other and
+% therefore just can be skipped. But the other counters have to
+% be increased:
+%
+%    \begin{macrocode}
+  \addtocounter{CurrentPage}{1}%
+  \addtocounter{pagesLTS.current.local.\pagesLTS@pnc}{1}%
+  }
+
+%    \end{macrocode}
+% \end{macro}
+%
+% \begin{macro}{\AtBeginDocument}
+% \indent |\AtBeginDocument| it is checked whether writing
+% into an \xfile{.aux}-file is allowed. The \textsf{pagesLTS}
+% package cannot be used without that!
+%
+%    \begin{macrocode}
+\AtBeginDocument{%
+  \if@filesw \relax%
+  \else%
+    \PackageError{pagesLTS}{No auxiliary file allowed.}%
+     {The pagesLTS package was not allowed to write to an .aux file.\MessageBreak%
+      This package does not work without access to an .aux file.\MessageBreak%
+      Press Ctrl+Z to exit.\MessageBreak%
+     }%
+%    \end{macrocode}
+%
+% Maybe abortion should be forced?
+%
+%    \begin{macrocode}
+    % \endinput
+  \fi%
+%    \end{macrocode}
+%
+% It is checked whether the \texttt{endfloat} package is loaded,
+% whether it is newer than March 1992 (i.\,e. at least
+% April 1992 v2.0), in which case it is compatible with this
+% \textsf{pagesLTS} package.\\
+% If it is even newer than 1995/10/10, it is the recent version
+% (as of the time of last revision of this documentation:
+% 1995/10/11 v2.4i).
+%
+%    \begin{macrocode}
+  \@ifpackageloaded{endfloat}%
+   {\@ifpackagelater{endfloat}{1992/03/31}% April 1992 v2.0
+    {\@ifpackagelater{endfloat}{1995/10/10}{% 1995/10/11 v2.4i
+       \relax}%
+%    \end{macrocode}
+%
+% If it is compatibel, but not the recent version, a warning is given:
+%
+%    \begin{macrocode}
+     {\PackageWarningNoLine{pagesLTS}{Old endfloat package detected:\MessageBreak%
+        There is a newer version of the endfloat package available.\MessageBreak%
+        Please consider updating your version.\MessageBreak%
+        The pagesLTS package might be incompatible with\MessageBreak%
+        your current endfloat package.\MessageBreak%
+      }%
+     }%
+%    \end{macrocode}
+%
+% If it is so very old, that it is not compatible,
+% an Error message is given:
+%
+%    \begin{macrocode}
+     {\PackageError{pagesLTS}{Incompatible, very old endfloat package detected.}%
+      {The very old version 2.0 (and earlier) of the\MessageBreak%
+       endfloat package actually redefined the \ enddocument,\MessageBreak%
+       and so interferred drastically with the LaTeX2e commands\MessageBreak%
+       which make use of \ AtEndDocument.\MessageBreak%
+       Newer versions of the endfloat package exists\MessageBreak%
+       (at least: v2.4i as of 1995/10/11)\MessageBreak%
+       in modern documentation form,\MessageBreak%
+       which should be available from CTAN.\MessageBreak%
+       Please update your endfloat package\MessageBreak%
+       for use with the pagesLTS package.\MessageBreak %
+      }%
+     }%
+    }%
+   }{}%
+%    \end{macrocode}
+%
+% It is checked whether the old \textsf{lastpage} package was loaded.\\
+% (If it was loaded indeed, the |\lastpage@putlabel| is
+% \textquotedblleft killed\textquotedblright ,
+% see subsection~\ref{ssec:lastpage}.)
+%
+%    \begin{macrocode}
+  \@ifpackageloaded{lastpage}%
+   {\PackageWarning{pagesLTS}{Incompatible package lastpage detected:\MessageBreak%
+      Package pagesLTS was loaded, but also the old\MessageBreak%
+      lastpage package.\MessageBreak%
+      pagesLTS has all functionality of the lastpage\MessageBreak%
+      package (and more), so just remove the lastpage\MessageBreak%
+      package from your document.\MessageBreak%
+      pagesLTS will now ''kill'' the lastpage@putlabel\MessageBreak%
+      command of the lastpage package.\MessageBreak%
+    }%
+    \gdef\lastpage@putlabel{\relax}%
+   }{}%
+%    \end{macrocode}
+%
+% Further it is checked whether the \textsf{AlphAlph} package is loaded.
+%
+%    \begin{macrocode}
+  \@ifpackageloaded{alphalph}%
+    {\PackageInfo{pagesLTS}{Package AlphAlph detected.\MessageBreak%
+       pagesLTS supports alphalph. Congratulations!\MessageBreak%
+       }%
+%    \end{macrocode}
+%
+% Unfortunately, |\@ifpackageloaded| cannot be used any later
+% (cf.~\LaTeX\ bug~2335, Synopsis: Proposal for |\@ifpackageloaded|, \linebreak
+% \url{http://www.latex-project.org/cgi-bin/ltxbugs2html?category=LaTeX&responsible=anyone&state=open&keyword=&pr=latex%2F2335&search=}),
+% therefore the result must be saved:
+%
+%    \begin{macrocode}
+     \global\def\pagesLTS@AlphAlph{1}%
+%    \end{macrocode}
+%
+% The commands are defined accordingly.
+%
+%    \begin{macrocode}
+     \newalphalph{\AlphMult}[mult]{\@Alph}{26}%
+     \newalphalph{\alphMult}[mult]{\@alph}{26}%
+     \newalphalph{\fnsymbolmult}[mult]{\@fnsymbol}{5}%
+    }%
+%    \end{macrocode}
+%
+% If the \textsf{alphalph} package is not detected, it is checked
+% whether no options are choosen, which would require that package.
+%
+%    \begin{macrocode}
+    {\ifx\pagesLTS@alphMult\pagesLTS@zero%
+       \PackageWarning{pagesLTS}{\pagesLTS@messageaMz }%
+     \else%
+       \PackageError{pagesLTS}{Package AlphAlph not loaded}%
+         {Package AlphAlph was not loaded, but package pagesLTS\MessageBreak%
+          was called without option alphMult=0 (zero).\MessageBreak%
+          Either load package AlphAlph,\MessageBreak%
+          or give option alphMult=0 (zero) to the pagesLTS package.\MessageBreak%
+         }%
+     \fi%
+     \ifx\pagesLTS@AlphMulti\pagesLTS@zero%
+       \PackageWarning{pagesLTS}{\pagesLTS@messageAMiz }%
+       \relax%
+     \else%
+       \PackageError{pagesLTS}{Package AlphAlph not loaded}%
+         {Package AlphAlph was not loaded, but package pagesLTS\MessageBreak%
+          was called without option AlphMulti=0 (zero).\MessageBreak%
+          Either load package AlphAlph,\MessageBreak%
+          or give option AlphMulti=0 (zero) to the pagesLTS package.\MessageBreak%
+         }%
+     \fi%
+     \ifpagesLTS@fnsymbolmult%
+       \PackageError{pagesLTS}{Package AlphAlph not loaded}%
+         {Package AlphAlph was not loaded, but package pagesLTS\MessageBreak%
+          was called without option fnsymbolmult=false.\MessageBreak%
+          Either load package AlphAlph,\MessageBreak%
+          or give option fnsymbolmult=false to the pagesLTS package.\MessageBreak%
+         }%
+     \else%
+       \PackageWarning{pagesLTS}{\pagesLTS@messagefsmz }%
+     \fi%
+    }%
+%    \end{macrocode}
+%
+% Further it is checked whether the \textsf{hyperref} package is loaded.
+%
+%    \begin{macrocode}
+  \@ifpackageloaded{hyperref}%
+    {\PackageInfo{pagesLTS}{Package hyperref detected.\MessageBreak%
+       pagesLTS supports hyperref. Congratulations!\MessageBreak%
+       }%
+     \global\def\pagesLTS@hyper{1}%
+%    \end{macrocode}
+%
+% Additionally a version check of the available \textsf{hyperref}
+% package is performed and if need be a warning is issued:
+%
+%    \begin{macrocode}
+     \@ifpackagelater{hyperref}{2010/04/16}{% 2010/04/17 v6.80x
+       \relax}{%
+       \PackageWarningNoLine{pagesLTS}{Old hyperref package detected:\MessageBreak%
+         There is a newer version of the\MessageBreak%
+         hyperref package available.\MessageBreak%
+         Please consider updating your version.\MessageBreak%
+       }%
+     }%
+     %% pagesLTS supports the use of the package hyperref by
+     %% Heiko Oberdiek (hyperref version 2010/04/17 v6.80x).
+     %% pagesLTS may work with earlier versions of this packages,
+     %% but this was not tested.
+    }%
+%    \end{macrocode}
+%
+% If no \textsf{hyperref} package in use is detected, a warning is issued, too:
+%
+%    \begin{macrocode}
+    {\PackageWarning{pagesLTS}{Package hyperref NOT detected.\MessageBreak%
+       pagesLTS would support hyperref. The page references\MessageBreak%
+       will NOT be hyperlinked!\MessageBreak }%
+    }%
+  }
+
+%    \end{macrocode}
+% \end{macro}
+%
+% \pagebreak
+%
+% \begin{macro}{\AtEndDocument}
+% \indent |\AtEndDocument| we put in a |\message| to show,
+% in what order things (which were called) are done
+% (see subsection~\ref{ssec:aed}).
+%
+%    \begin{macrocode}
+\AtEndDocument{%
+  \message{AED: pagesLTS setting LastPage}%
+%    \end{macrocode}
+%
+% After this we issue a |\clearpage| to put out all floats,
+% which are still floatig, remember the page number (if |fnsymbol|),
+% and after that we place the \texttt{LastPage} label. If the old
+% \textsf{lastpage} package was detected, we override its
+% |LastPage| label.
+%
+%    \begin{macrocode}
+  \clearpage%
+  \ifx\pagesLTS@pnc\pagesLTS@fns%
+    \def\pagesLTS@tmpA{\arabic{pagesLTS.fnsymbol.local}}%
+    \ifnum \pagesLTS@eso=\pagesLTS@tmpA%
+      \gdef\pagesLTS@rerun{0}%
+    \else%
+      \gdef\pagesLTS@rerun{1}%
+    \fi%
+    \if@filesw%
+      \immediate\write\@auxout{\string
+        \gdef\string\pagesLTS@eso{\pagesLTS@tmpA}}%
+    \fi%
+  \fi%
+  \pagesLTS@putlabel{LastPage}{\thepage}%
+%    \end{macrocode}
+%
+% We do not need the temporary definition any more.
+%
+%    \begin{macrocode}
+  \let\pagesLTS@tmpA\undefined%
+  }
+
+%    \end{macrocode}
+% \end{macro}
+%
+% \begin{macro}{\AfterLastShipout}
+% \indent |\AfterLastShipout| is a command from Heiko Oberdiek's
+% \texttt{atveryend} package (see above).
+%
+%    \begin{macrocode}
+\AfterLastShipout{%
+%    \end{macrocode}
+%
+% The number of pages with the \textsf{fnsymbol} page numbering scheme,
+%|\pagesLTS@esov|, is saved via the \xfile{.aux} file:
+%
+%    \begin{macrocode}
+  \if@filesw%
+    \immediate\write\@auxout{\string
+      \setcounter{pagesLTS.fnsymbol.local}{\pagesLTS@esov}}%
+  \fi%
+%    \end{macrocode}
+%
+% If the \textsf{hyperref} package is in use, and the page numbering scheme
+% of the last page is \textsf{fnsymbol}, everything is quite more complicated.
+% Therefore |\lastpageref| is switched from simple |\lastpagereftxt|
+% to the more difficult |\lastpagerefend|.
+%
+%    \begin{macrocode}
+  \ifx\pagesLTS@hyper\pagesLTS@one%
+    \ifx\pagesLTS@pnc\pagesLTS@fns%
+      \if@filesw%
+        \immediate\write\@auxout{\string
+          \gdef\string\lastpageref{\string\lastpagerefend}}%
+      \fi%
+    \fi%
+  \fi%
+%    \end{macrocode}
+%
+% At the call of a |\pagenumbering{...}| command, everything
+% for a split page numbering scheme is organized. For the last
+% page numbering scheme, there is no |\pagenumbering{...}| command
+% at the end, so we need to handle this here:
+%
+%    \begin{macrocode}
+  \pagesLTS@ifcounter{pagesLTS.\pagesLTS@pnc.\arabic{pagesLTS.pnc.\pagesLTS@pnc}.local.count}%
+  \setcounter{pagesLTS.\pagesLTS@pnc.\arabic{pagesLTS.pnc.\pagesLTS@pnc}.local.count}{%
+    \value{pagesLTS.current.local.\pagesLTS@pnc}}%
+%    \end{macrocode}
+%
+% And we are one page after the last one (|\AfterLastShipout|!),
+% so we go back one page.
+%
+%    \begin{macrocode}
+  \addtocounter{pagesLTS.\pagesLTS@pnc.\arabic{pagesLTS.pnc.\pagesLTS@pnc}.local.count}{-1}
+  \ifnum \value{pagesLTS.pnc.\pagesLTS@pnc}>1%
+    \pagesLTS@ifcounter{pagesLTS.tmpA}%
+    \setcounter{pagesLTS.tmpA}{\value{pagesLTS.pnc.\pagesLTS@pnc}}%
+    \addtocounter{pagesLTS.tmpA}{-1}%
+    \pagesLTS@ifcounter{pagesLTS.tmpB}%
+    \addtocounter{pagesLTS.tmpB}{\value{pagesLTS.\pagesLTS@pnc.\arabic{pagesLTS.tmpA}.local.count}}%
+    \addtocounter{pagesLTS.\pagesLTS@pnc.\arabic{pagesLTS.pnc.\pagesLTS@pnc}.local.count}{%
+      -\value{pagesLTS.tmpB}}%
+  \fi%
+  \if@filesw%
+    \immediate\write\@auxout{\string
+      \pagesLTS@ifcounter{pagesLTS.\pagesLTS@pnc.\arabic{pagesLTS.pnc.\pagesLTS@pnc}.local.cnt}}%
+    \edef\pagesLTS@tmpA{\arabic{pagesLTS.\pagesLTS@pnc.\arabic{pagesLTS.pnc.\pagesLTS@pnc}.local.count}}%
+    \immediate\write\@auxout{\string
+      \setcounter{pagesLTS.\pagesLTS@pnc.\arabic{pagesLTS.pnc.\pagesLTS@pnc}.local.cnt}{\pagesLTS@tmpA}}%
+    \let\pagesLTS@tmpA\undefined%
+  \fi%
+%    \end{macrocode}
+%
+% We need to save (via the \xfile{.aux} file) the page name |\thepage| and
+% the page number |\arabic{CurrentPage}| of the last page,
+% in case the last page has \textsf{fnsymbol} page numbering scheme.
+%
+%    \begin{macrocode}
+  \addtocounter{page}{-1}%
+  \edef\pagesLTS@tmpA{\thepage}%
+  \if@filesw%
+    \immediate\write\@auxout{\string
+      \gdef\string\pagesLTS.lastpage{\pagesLTS@tmpA}}%
+  \fi%
+  \addtocounter{page}{+1}%
+  \addtocounter{CurrentPage}{-1}%
+  \def\pagesLTS@tmpB{\arabic{CurrentPage}}%
+  \if@filesw%
+    \immediate\write\@auxout{\string
+      \setcounter{pagesLTS.pagenr}{\pagesLTS@tmpB}}%
+  \fi%
+  \addtocounter{CurrentPage}{+1}%
+%    \end{macrocode}
+%
+% \pagebreak
+%
+% The \texttt{VeryLastPage} label is set here, and when
+% |\lastpageref{VeryLastPage}| instead of |\lastpageref{LastPage}| is used,
+% it should really point to the last page.
+% |LastPage| and |VeryLastPage| should be identical,
+% unless a package was active with output |\AtEndDocument|
+% \textit{after} the \textsf{pagesLTS} package.
+%
+%    \begin{macrocode}
+  \message{AED: pagesLTS setting VeryLastPage via AfterLastShipout}%
+  \pagesLTS@putlabel{VeryLastPage}{\thepage}%
+%    \end{macrocode}
+%
+% The \texttt{LastPages} label is set here, and
+% |\lastpageref{LastPages}| gives the total number of pages
+% and points to the (very) last page.
+%
+%    \begin{macrocode}
+  \message{AED: pagesLTS setting LastPages via AfterLastShipout}%
+  \pagesLTS@putlabels%
+%    \end{macrocode}
+%
+% We do not need the temporary definitions any more.
+%
+%    \begin{macrocode}
+  \let\pagesLTS@tmpA\undefined%
+  \let\pagesLTS@tmpB\undefined%
+  }
+
+%    \end{macrocode}
+% \end{macro}
+%
+% \begin{macro}{\AtVeryEndDocument}
+% \indent |\AtVeryEndDocument{...}| is even later:
+% \begin{quote}
+% \textquotedblleft The code is called after the \xext{aux} file
+% is closed and read in again. It is the place for final checks,
+% rerun hints, final messages.\textquotedblright
+% \end{quote}
+% (\textsf{atveryend} package of Heiko Oberdiek, v1.5 as of 2010/03/24)\\
+% Here it is used for a rerun hint. Unfortunately, this hint is presented
+% to the user \textit{before} the list of used
+% files/styles/classes/packages\ldots (of |\listfiles| command),
+% so the user has a chance to miss it.\\
+% For example if the page numbering scheme of the last page
+% of the \textsf{pagesLTS-example.tex} file is changed to |fnsymbol| and two runs
+% of \pdfLaTeX\ are done, \pdfLaTeX\ will be happy and will not complain
+% about changed labels. But indeed, a \textit{third} run is necessary
+% and indicated by the warning message below.
+%
+%    \begin{macrocode}
+\AtVeryEndDocument{%
+  \ifx\pagesLTS@rerun\pagesLTS@one%
+    \PackageWarningNoLine{pagesLTS}{Label(s) may have changed.\MessageBreak%
+      Rerun to get cross-references right.\MessageBreak%
+      }%
+  \fi%
+  }
+
+%    \end{macrocode}
+% \end{macro}
+%
+%    \begin{macrocode}
+%</package>
+%    \end{macrocode}
+%
+% \newpage
+%
+% \section{Installation}
+%
+% \subsection{Downloads\label{ss:Downloads}}
+%
+% Everything \textit{should} be available on \CTAN{}, \url{ftp://ftp.ctan.org/tex-archive/},
+% but may need additional packages themselves.\\
+%
+% \DescribeMacro{pagesLTS.dtx}
+% For unpacking the |pagesLTS.dtx| file and constructing the documentation it is required:
+% \begin{description}
+% \item[-] \TeX Format \LaTeXe, 1994/06/01, v2$\varepsilon $: \CTAN{}
+%
+% \item[-] document class \textsf{ltxdoc}, 2007/11/11, v2.0u, \CTAN{macros/latex/base/ltxdoc.dtx}
+%
+% \item[-] package \textsf{holtxdoc}, 2010/04/24, v0.19, \CTAN{macros/latex/contrib/oberdiek/holtxdoc.dtx}
+%
+% \item[-] package \textsf{hypdoc}, 2010/03/26, v1.9, \CTAN{macros/latex/contrib/oberdiek/hypdoc.dtx}
+%
+% \item[-] package \textsf{geometry}, 2010/03/13, v5.3, \CTAN{macros/latex/contrib/geometry/geometry.dtx}
+% \end{description}
+%
+% \DescribeMacro{pagesLTS.sty}
+% The |pagesLTS.sty| for \LaTeXe\ (i.\,e. all documents using
+% the \textsf{pagesLTS} package) requires:
+% \begin{description}
+% \item[-] \TeX Format \LaTeXe, 1994/06/01, v2$\varepsilon $, \CTAN{}
+%
+% \item[-] package \textsf{atveryend}, 2010/03/24, v1.5, \CTAN{macros/latex/contrib/oberdiek/atveryend.dtx}
+%
+% \item[-] package \textsf{everyshi}, 2001/05/15, v3.00, \CTAN{macros/latex/contrib/ms/everyshi.dtx}
+%
+% \item[-] package \textsf{kvoptions}, 2010/02/22, v3.7, \CTAN{macros/latex/contrib/oberdiek/kvoptions.dtx}
+%
+% \item[-] package \textsf{undolabl}, 2010/06/03, v1.0b, \CTAN{macros/latex/contrib/muench/undolabl.dtx}\\
+%           (submitted, should become available at that location soon)
+% \end{description}
+%
+% \DescribeMacro{lastpage209.sty}
+% The |lastpage209.sty| for \LaTeX209\ (i.\,e. all documents using
+% the \textsf{lastpage209} package) requires:
+% \begin{description}
+% \item[-] \TeX Format \LaTeX, v2.09
+% \end{description}
+% but only provides the |LastPage| Label - nothing else!\\
+% (You can get it also by un-commenting the\\
+% \texttt{ \%\% \textbackslash file\{lastpage209.sty\}\{\textbackslash from\{pagesLTS.dtx\}\{lastpage209\}\}\% }\\
+% line in the \xfile{pagesLTS.ins} file and running\\
+% |tex pagesLTS.ins|.)\\
+%
+% \DescribeMacro{pagesLTS-example.tex}
+% The |pagesLTS-example.tex| requires the same files as all
+% documents using the \textsf{pagesLTS} package, and additionally:
+% \begin{description}
+% \item[-] class \textsf{article}, 2007/10/19, v1.4h, from \textsf{classes.dtx}:\\
+%           \CTAN{macros/latex/base/classes.dtx}
+%
+% \item[-] package \textsf{alphalph}, 2010/04/18, v2.3, \CTAN{macros/latex/contrib/oberdiek/alphalph.dtx}
+%
+% \item[-] package \textsf{lipsum}, 2005/01/26, v1.0, \CTAN{macros/latex/contrib/lipsum/lipsum.dtx}
+%
+% \item[-] package \textsf{showkeys}, 2007/08/07, v3.15, \CTAN{macros/latex/required/tools/showkeys.dtx}
+%
+% \item[-] package \textsf{hyperref}, 2010/05/13, v6.81e, \CTAN{macros/latex/contrib/hyperref.zip}
+%
+% \item[-] package \textsf{pagesLTS}, 2010/06/03, v1.1b, \CTAN{macros/latex/contrib/muench/pagesLTS/pagesLTS.dtx}\\
+%           (submitted, should become available at that location soon)\\
+%   (Well, it is the example file for this package, and because you are reading the
+%    documentation for the \textsf{pagesLTS} package, it can be assumed that you already
+%    have some version of it -- is it the current one?)
+% \end{description}
+%
+% \DescribeMacro{papermas}
+% The \textsf{papermas} package is not required, but requires itself the
+% the \textsf{pagesLTS} package and can be considered as kind of add-on.
+% It should become available at CTAN soon:
+% \begin{description}
+% \item[-] package \textsf{papermas}, 2010/06/03, v1.0b, \CTAN{macros/latex/contrib/muench/papermas/papermas.dtx}
+% \end{description}
+%
+% \DescribeMacro{endfloat}
+% The \textsf{endfloat} package is not required, but because
+% the \textsf{pagesLTS} package is incompatibel with very old versions
+% of the \textsf{endfloat} package (see subsection~\ref{sec:endfloat}),
+% here the recent one is listed:
+% \begin{description}
+% \item[-] package \textsf{endfloat}, 1995/10/11, v2.4i, \CTAN{macros/latex/contrib/endfloat/endfloat.dtx}
+% \end{description}
+%
+% \DescribeMacro{prelim2e}
+% The \textsf{prelim2e} package is not required either, but because
+% |Prelim@EveryShipout| code was taken from that package, it is listed, too:
+% \begin{description}
+% \item[-] package \textsf{prelim2e}, 2009/05/29, v1.3, \CTAN{macros/latex/contrib/ms/prelim2e.dtx}
+% \end{description}
+%
+% \DescribeMacro{fancyhdr}
+% \DescribeMacro{nccfancyhdr}
+% Neither \textsf{fancyhdr} nor \textsf{nccfancyhdr} package is required
+% (the \textsf{lastpage} package used its precessor \textsf{fancyheadings}),
+% but because they were mentioned, also they are listed here:
+% \begin{description}
+% \item[-] package \textsf{fancyhdr}, 2005/03/22, v3.2, \CTAN{macros/latex/contrib/fancyhdr.zip}
+%
+% \item[-] package \textsf{nccfancyhdr}, 2004/12/07, v1.1, \CTAN{macros/latex/contrib/ncctools/source/nccfancyhdr.dtx}
+% \end{description}
+%
+% \DescribeMacro{count1to}
+% \DescribeMacro{nofm}
+% \DescribeMacro{totpages}
+% \DescribeMacro{lastpage}
+% \DescribeMacro{zref}
+% As possible alternatives in section \ref{sec:Alternatives} there are listed
+% \begin{description}
+% \item[-] package \textsf{count1to}, 2009/05/24, v2.1, \CTAN{macros/latex/contrib/ms/count1to.dtx}
+%
+% \item[-] package \textsf{nofm}, 1991/02/25, v?.?,
+%  \url{ftp://tug.ctan.org/pub/tex-archive/obsolete/macros/latex209/contrib/misc/nofm.sty}
+%  does not work with e.\,g. \textsf{hyperref}
+%
+% \item[-] package \textsf{totpages}, 2005/09/19, v2.00, \CTAN{macros/latex/contrib/totpages/totpages.dtx}
+%
+% \item[-] package \textsf{lastpage}, 1994/07/20, v0.1b, \CTAN{macros/latex/contrib/lastpage/lastpage.dtx}
+%
+% \item[-] package \textsf{zref}, 2010/05/01, v2.17, \CTAN{macros/latex/contrib/oberdiek/zref.dtx}
+% \end{description}
+%
+% \DescribeMacro{Oberdiek}
+% \DescribeMacro{holtxdoc}
+% \DescribeMacro{atveryend}
+% \DescribeMacro{kvoptions}
+% \DescribeMacro{alphalph}
+% \DescribeMacro{zref}
+% All packages of Heiko Oberdiek's bundle `oberdiek'
+% (especially \textsf{holtxdoc}, \textsf{atveryend},
+% \textsf{kvoptions}, \textsf{alphalph}, \textsf{zref})
+% are also available in a TDS compliant ZIP archive:\\
+% \CTAN{install/macros/latex/contrib/oberdiek.tds.zip}.\\
+% \textbf{Warning}: holtxdoc, 2010/04/24 v0.19, requires the packages
+% \begin{description}
+% \item[-] hypdoc, 2010/03/26, v1.9
+% \item[-] hyperref, 2010/03/30, v6.80u (latest: 2010/05/13, v6.81e)
+% \item[-] pdftexcmds, 2010/04/01, v0.9
+% \item[-] ltxcmds, 2010/03/09, v1.4 (latest: 2010/04/26, v1.7)
+% \item[-] hologo, 2010/04/24, v1.2
+% \item[-] array (latest: 2008/09/09, v2.4c)
+% \end{description}
+% (or more recent versions) and does neither work with
+% nor check for earlier versions!\\
+% (It is probably best to download\\
+% \CTAN{install/macros/latex/contrib/oberdiek.tds.zip}
+% and use this, because the packages in there should be both
+% recent and compatible.)\\
+%
+% \pagebreak
+%
+% \subsection{Package, unpacking TDS}
+%
+% \paragraph{Package.} This package should become available soon on \CTAN{}
+% \begin{description}
+% \item[\CTAN{macros/latex/contrib/muench/pagesLTS/pagesLTS.dtx}]\hspace*{0.1cm} \\
+%       The source file.
+% \item[\CTAN{macros/latex/contrib/muench/pagesLTS/pagesLTS.ins}]\hspace*{0.1cm} \\
+%       The installation file.
+% \item[\CTAN{macros/latex/contrib/muench/pagesLTS/pagesLTS.drv}]\hspace*{0.1cm} \\
+%       The driver to generate the documentation.
+% \item[\CTAN{macros/latex/contrib/muench/pagesLTS/ltxdoc.cfg}]\hspace*{0.1cm} \\
+%       The \LaTeX documentation configuration file, also for generating the documentation.
+% \item[\CTAN{macros/latex/contrib/muench/pagesLTS/pagesLTS.pdf}]\hspace*{0.1cm} \\
+%       The documentation.
+% \item[\CTAN{macros/latex/contrib/muench/pagesLTS/pagesLTS.sty}]\hspace*{0.1cm} \\
+%       The \xext{sty}le file.
+% \item[\CTAN{macros/latex/contrib/muench/pagesLTS/pagesLTS-example.tex}]\hspace*{0.1cm} \\
+%       The example file.
+% \item[\CTAN{macros/latex/contrib/muench/pagesLTS/pagesLTS-example.pdf}]\hspace*{0.1cm} \\
+%       The compiled example file, as it should look like.
+% \item[\CTAN{install/macros/latex/contrib/muench/pagesLTS/pagesLTS.tds.zip}]\hspace*{0.1cm} \\
+%       Everything in TDS compliant, compiled format.
+% \end{description}
+%
+% For required other packages, see the preceding subsection.
+%
+% \paragraph{Unpacking.} The \xfile{.dtx} file is a self-extracting
+% \docstrip\ archive. The files are extracted by running the
+% \xfile{.dtx} through \plainTeX:
+% \begin{quote}
+%   \verb|tex pagesLTS.dtx|
+% \end{quote}
+%
+% About generating the documentation see paragraph~\ref{GenDoc} below.\\
+%
+% \paragraph{TDS.} Now the different files must be moved into
+% the different directories in your installation TDS tree
+% (also known as \xfile{texmf} tree):
+% \begin{quote}
+% \def\t{^^A
+% \begin{tabular}{@{}>{\ttfamily}l@{ $\rightarrow$ }>{\ttfamily}l@{}}
+%   pagesLTS.sty & tex/latex/muench/pagesLTS.sty\\
+%   pagesLTS.pdf & doc/latex/muench/pagesLTS.pdf\\
+%   pagesLTS-example.tex & doc/latex/muench/pagesLTS-example.tex\\
+%   pagesLTS-example.pdf & doc/latex/muench/pagesLTS-example.pdf\\
+%   pagesLTS.dtx & source/latex/muench/pagesLTS.dtx\\
+%   (lastpage209.sty & tex/latex/lastpage209.sty for \LaTeX209)\\
+% \end{tabular}^^A
+% }^^A
+% \sbox0{\t}^^A
+% \ifdim\wd0>\linewidth
+%   \begingroup
+%     \advance\linewidth by\leftmargin
+%     \advance\linewidth by\rightmargin
+%   \edef\x{\endgroup
+%     \def\noexpand\lw{\the\linewidth}^^A
+%   }\x
+%   \def\lwbox{^^A
+%     \leavevmode
+%     \hbox to \linewidth{^^A
+%       \kern-\leftmargin\relax
+%       \hss
+%       \usebox0
+%       \hss
+%       \kern-\rightmargin\relax
+%     }^^A
+%   }^^A
+%   \ifdim\wd0>\lw
+%     \sbox0{\small\t}^^A
+%     \ifdim\wd0>\linewidth
+%       \ifdim\wd0>\lw
+%         \sbox0{\footnotesize\t}^^A
+%         \ifdim\wd0>\linewidth
+%           \ifdim\wd0>\lw
+%             \sbox0{\scriptsize\t}^^A
+%             \ifdim\wd0>\linewidth
+%               \ifdim\wd0>\lw
+%                 \sbox0{\tiny\t}^^A
+%                 \ifdim\wd0>\linewidth
+%                   \lwbox
+%                 \else
+%                   \usebox0
+%                 \fi
+%               \else
+%                 \lwbox
+%               \fi
+%             \else
+%               \usebox0
+%             \fi
+%           \else
+%             \lwbox
+%           \fi
+%         \else
+%           \usebox0
+%         \fi
+%       \else
+%         \lwbox
+%       \fi
+%     \else
+%       \usebox0
+%     \fi
+%   \else
+%     \lwbox
+%   \fi
+% \else
+%   \usebox0
+% \fi
+% \end{quote}
+% If you have a \xfile{docstrip.cfg} that configures and enables \docstrip's
+% TDS installing feature, then some files can already be in the right
+% place, see the documentation of \docstrip.
+%
+% \subsection{Refresh file name databases}
+%
+% If your \TeX~distribution (\teTeX, \mikTeX,\dots) relies on file name
+% databases, you must refresh these. For example, \teTeX\ users run
+% \verb|texhash| or \verb|mktexlsr|.
+%
+% \subsection{Some details for the interested}
+%
+% \paragraph{Unpacking with \LaTeX.}
+% The \xfile{.dtx} chooses its action depending on the format:
+% \begin{description}
+% \item[\plainTeX:] Run \docstrip\ and extract the files.
+% \item[\LaTeX:] Generate the documentation.
+% \end{description}
+% If you insist on using \LaTeX\ for \docstrip\ (really,
+% \docstrip\ does not need \LaTeX), then inform the autodetect routine
+% about your intention:
+% \begin{quote}
+%   \verb|latex \let\install=y\input{pagesLTS.dtx}|
+% \end{quote}
+% Do not forget to quote the argument according to the demands
+% of your shell.
+%
+% \paragraph{Generating the documentation.\label{GenDoc}}
+% You can use both the \xfile{.dtx} or the \xfile{.drv} to generate
+% the documentation. The process can be configured by the
+% configuration file \xfile{ltxdoc.cfg}. For instance, put the following
+% line into this file, if you want to have A4 as paper format:
+% \begin{quote}
+%   \verb|\PassOptionsToClass{a4paper}{article}|
+% \end{quote}
+%
+% \noindent An example follows how to generate the
+% documentation with \pdfLaTeX :
+%
+% \begin{quote}
+%\begin{verbatim}
+%pdflatex pagesLTS.dtx
+%makeindex -s gind.ist pagesLTS.idx
+%pdflatex pagesLTS.dtx
+%makeindex -s gind.ist pagesLTS.idx
+%pdflatex pagesLTS.dtx
+%\end{verbatim}
+% \end{quote}
+%
+% \subsection{Compiling the example}
+%
+% The example file, \textsf{pagesLTS-example.tex}, can be compiled via\\
+% \indent |latex pagesLTS-example.tex|\\
+% or (recommended)\\
+% \indent |pdflatex pagesLTS-example.tex|\\
+% and will need \textit{at least} (!) three compiler runs to get
+% all references right.
+%
+% \section{Things suggested to be done\label{sec:todo}}
+%
+% \begin{itemize}
+% \item Include a correct checksum for \textsf{pagesLTS}.
+% \item Insert the final references where to get the files at \CTAN{}.
+% \end{itemize}
+%
+% \pagebreak
+%
+% \section{Acknowledgements}
+%
+% I (H.-Martin M\"{u}nch) would like to thank Jeffrey P. Goldberg
+% (jeffrey+news at goldmark dot org) for inventing the
+% \textsf{lastpage} package. This package first started as
+% a revision of the \textsf{lastpage} package, but it became
+% obviouse that a replacement was needed.
+% Further I would like to thank Heiko Oberdiek
+% (heiko dot oberdiek at googlemail dot com) for providing
+% the |\erroralphalph| command as well as
+% a~lot~(!) of usefull packages (from which I also got everything I
+% know about creating a file in \xfile{dtx} format, ok, say it: copying),
+% Martin Schr\"{o}der (martin at oneiros dot de) for his \textsf{prelim2e} package,
+% from which I got the |Prelim@EveryShipout| code,
+% Ulrich Diez (eu\_angelion at web dot de) for his code
+% for my \textsf{undolabl} package, which allows overwriting of labels,
+% Andres L\"{o}h (andres at cs dot uu dot nl)
+% for the code to determine the current page numbering scheme,
+% and the \Newsgroup{comp.text.tex} and \Newsgroup{de.comp.text.tex}
+% newsgroups for their help in all things \TeX.
+%
+% \phantomsection
+% \begin{History}\label{History}
+%   \begin{Version}{1994/06/17, \textsf{lastpage}}
+%     \item \textsf{lastpage} v0.99a: First shot by Jeffrey P. Goldberg.
+%   \end{Version}
+%   \begin{Version}{1994/06/25, \textsf{lastpage}}
+%     \item \textsf{lastpage} v0.1b: Last version number created by Jeffrey P. Goldberg.
+%   \end{Version}
+%   \begin{Version}{1994/07/20, \textsf{lastpage}}
+%     \item \textsf{lastpage} v0.1b (again): Documentation updated by Jeffrey P. Goldberg.\\
+%       The main source code of the \textsf{lastpage} package 1994/07/20 v0.1b was:\\
+%       \begin{verbatim}
+%        \NeedsTeXFormat{LaTeX2e}[1994/06/01]
+%        \ProvidesPackage{lastpage}[1994/07/20 v0.1b
+%          LaTeX2e package for refs to last page number (JPG)]
+%        \def\lastpage@putlabel{\addtocounter{page}{-1}%
+%          \immediate\write\@auxout{\string
+%          \newlabel{LastPage}{{}{\thepage}}}%
+%          \addtocounter{page}{1}}
+%        \AtEndDocument{%
+%          \message{AED: lastpage setting LastPage}%
+%          \clearpage\pagesLTS@putlabel}%
+%        \endinput
+%       \end{verbatim}
+%       and then \textsf{hyperref} even redefines |\lastpage@putlabel|.
+%   \end{Version}
+%   \begin{Version}{2010/02/18, \textsf{lastpage}}
+%     \item \textsf{lastpage} v1.1: Proposed |LastPages| label by H.-Martin M\"{u}nch
+%       on \Newsgroup{comp.text.tex}
+%   \end{Version}
+%   \begin{Version}{2010/05/15 v1.0}
+%     \item \textsf{pagesLTS} Complete rewriting of the package, so as to work with
+%       \textbf{more than one page numbering scheme}; using \texttt{\textbackslash AtVeryEnd}
+%       for \texttt{VeryLastPage}; upgrade from \textsf{fancyheadings} to
+%       \textsf{fancyhdr} package, then removed the need for a \textsf{fancyhdr}
+%       package at all.
+%     \item Rewriting of the package, so as to work with the \textsf{fnsymbol}
+%       page numbering scheme (even on the last page).
+%     \item Introduction of \textsf{kvoptions} into this package.
+%     \item Check for incompatible \textsf{endfloat} package.
+%     \item \textsf{lastpage209.sty} for \LaTeX209.
+%     \item Replacement of |\filedate|, |-version|, |-name|,\ldots\ because
+%       of \LaTeX~bug 2705:\\
+%       Synopsis: Possible problem with |\fileversion| and |\filedate|\\
+%       \url{http://www.latex-project.org/cgi-bin/ltxbugs2html?category=LaTeX&responsible=anyone&state=anything&keyword=lastpage&pr=latex%2F2705&search=}
+%     \item \textsf{alphalph} support included.
+%     \item Page numbering extension |\erroralph| of Heiko Oberdiek included.
+%     \item (Page-) Numbering extension for |roman| and |Roman| numbers included.
+%     \item Incompatible, old \textsf{lastpage} package \textquotedblleft killed\textquotedblright.
+%     \item Example |pagesLTS-example.tex|.
+%     \item Alternatives listing (section \ref{sec:Alternatives}).
+%     \item Listing of \TeX\ sources (subsection \ref{ss:Downloads}).
+%     \item A~lot~(!) of details.
+%     \item Complete rewriting of the documentation.
+%     \item Everything in DTX framework.
+%     \item New package name: \textsf{pagesLTS} for Last, Total,
+%            and page numbering Schemes pages.
+%   \end{Version}
+%   \begin{Version}{2010/06/01 v1.1}
+%     \item Abstract changed: Negative \texttt{roman} and \texttt{Roman} page
+%            numbers are now possible.
+%     \item Some references to other packages have been updated.
+%     \item Several typing mistakes have been corrected
+%            (and new ones have been included probably) -
+%            both in the \xfile{sty}le file as well as in this documentation.
+%   \end{Version}
+%   \begin{Version}{2010/06/03 v1.1b}
+%     \item Corrected a bug in |\XXRoman|, where |\roman| instead of |\Roman| had been used.
+%     \item New \textsf{papermas} package mentioned.
+%     \item Updated references to other packages.
+%     \item TDS locations updated.
+%     \item Several changes in the documentation and the Readme file.
+%   \end{Version}
+% \end{History}
+%
+% % \PrintChanges
+%
+% \bigskip
+%
+% When you find a mistake or have a suggestion for an improvement of this package,
+% please send an e-mail to the maintainer, thanks!\\
+%
+% \bigskip
+%
+% Note: J and Y are not missing in the index, but no commands beginning
+% with these letters have been used in this \textsf{pagesLTS} package.
+%
+% \newpage
+%
+% \PrintIndex
+%
+% \Finale
+%
+\endinput
\ No newline at end of file
diff --git a/Master/texmf-dist/source/latex/pageslts/pagesLTS.ins b/Master/texmf-dist/source/latex/pageslts/pagesLTS.ins
new file mode 100644
index 00000000000..c833937d01a
--- /dev/null
+++ b/Master/texmf-dist/source/latex/pageslts/pagesLTS.ins
@@ -0,0 +1,161 @@
+%%
+%% This is file `pagesLTS.ins',
+%% generated with the docstrip utility.
+%%
+%% The original source files were:
+%%
+%% pagesLTS.dtx  (with options: `install')
+%% 
+%% This is a generated file.
+%% 
+%% IMPORTANT NOTICE:
+%% On the first page backslash pagenumbering should be called
+%% (with the appropriate argument out of e.g.
+%%  * roman - Lowercase Roman numerals: i, ii, iii, iv,...
+%%  * Roman - Uppercase Roman numerals: I, II, III, IV,...
+%%  * arabic - Arabic numerals: 1, 2, 3, 4,...
+%%  * alph - Lowercase letters: a, b, c, d,...
+%%  * Alph - Uppercase letters: A, B, C, D,...
+%%  * fnsymbol - Footnote symbols: *, † (ddagger), ‡ (dddagger),
+%%                                 § (mathsection),...
+%% ). The command backslash pagenumbering is renewed, but no change
+%% should be visible to the output text, because only labels are added.
+%% backslash OrigPagenumbering can be used to get the original meaning
+%% of backslash pagenumbering, but in that case this package does not
+%% see the change in the page numbering scheme and will make mistakes.
+%% The package takes options.
+%% 
+%% The usual disclaimers apply:
+%% If it doesn't work right that's your problem.
+%% (Nevertheless, send an e-mail to the maintainer
+%%  when you find an error in this package.)
+%% 
+%% This work may be distributed and/or modified under the
+%% conditions of the LaTeX Project Public License, either
+%% version 1.3c of this license or (at your option) any later
+%% version. This version of this license is in
+%%    http://www.latex-project.org/lppl/lppl-1-3c.txt
+%% and the latest version of this license is in
+%%    http://www.latex-project.org/lppl.txt
+%% and version 1.3c or later is part of all distributions of
+%% LaTeX version 2005/12/01 or later.
+%% 
+%% This work has the LPPL maintenance status "maintained".
+%% 
+%% The Current Maintainer of this work is H.-Martin Muench
+%% (Martin dot Muench at Uni-Bonn dot de).
+%% 
+%% This package first started as a revision of the lastpage
+%% package of Jeffrey P. Goldberg (jeffrey+news at goldmark dot org),
+%% but it became obviouse that a replacement was needed.
+%% 
+%% This work consists of the main source file pagesLTS.dtx
+%% and the derived files
+%%    pagesLTS.sty, pagesLTS.pdf, pagesLTS.ins, pagesLTS.drv,
+%%    pagesLTS-example.tex.
+%% 
+\input docstrip.tex
+
+\obeyspaces
+\Msg{*****************************************************}
+\Msg{* Installation                                      *}
+\Msg{* Package: pagesLTS v1.1b 2010/06/03 LaTeX2e package *}
+\Msg{* Refers to special pages' numbers/names (HMM)      *}
+\Msg{*****************************************************}
+
+\keepsilent
+\askforoverwritefalse
+
+\let\MetaPrefix\relax
+\preamble
+
+This is a generated file.
+
+IMPORTANT NOTICE:
+On the first page backslash pagenumbering should be called
+(with the appropriate argument out of e.g.
+ * roman - Lowercase Roman numerals: i, ii, iii, iv,...
+ * Roman - Uppercase Roman numerals: I, II, III, IV,...
+ * arabic - Arabic numerals: 1, 2, 3, 4,...
+ * alph - Lowercase letters: a, b, c, d,...
+ * Alph - Uppercase letters: A, B, C, D,...
+ * fnsymbol - Footnote symbols: *, † (ddagger), ‡ (dddagger),
+                                § (mathsection),...
+). The command backslash pagenumbering is renewed, but no change
+should be visible to the output text, because only labels are added.
+backslash OrigPagenumbering can be used to get the original meaning
+of backslash pagenumbering, but in that case this package does not
+see the change in the page numbering scheme and will make mistakes.
+The package takes options.
+
+The usual disclaimers apply:
+If it doesn't work right that's your problem.
+(Nevertheless, send an e-mail to the maintainer
+ when you find an error in this package.)
+
+This work may be distributed and/or modified under the
+conditions of the LaTeX Project Public License, either
+version 1.3c of this license or (at your option) any later
+version. This version of this license is in
+   http://www.latex-project.org/lppl/lppl-1-3c.txt
+and the latest version of this license is in
+   http://www.latex-project.org/lppl.txt
+and version 1.3c or later is part of all distributions of
+LaTeX version 2005/12/01 or later.
+
+This work has the LPPL maintenance status "maintained".
+
+The Current Maintainer of this work is H.-Martin Muench
+(Martin dot Muench at Uni-Bonn dot de).
+
+This package first started as a revision of the lastpage
+package of Jeffrey P. Goldberg (jeffrey+news at goldmark dot org),
+but it became obviouse that a replacement was needed.
+
+This work consists of the main source file pagesLTS.dtx
+and the derived files
+   pagesLTS.sty, pagesLTS.pdf, pagesLTS.ins, pagesLTS.drv,
+   pagesLTS-example.tex.
+
+\endpreamble
+\let\MetaPrefix\DoubleperCent
+
+\generate{%
+  \file{pagesLTS.ins}{\from{pagesLTS.dtx}{install}}%
+  \file{pagesLTS.drv}{\from{pagesLTS.dtx}{driver}}%
+  \file{ltxdoc.cfg}{\from{pagesLTS.dtx}{ltxdoc}}%
+  %%\file{lastpage209.sty}{\from{pagesLTS.dtx}{lastpage209}}%
+  \usedir{tex/latex/muench/pagesLTS}%
+  \file{pagesLTS.sty}{\from{pagesLTS.dtx}{package}}%
+  \usedir{doc/latex/muench/pagesLTS}%
+  \file{pagesLTS-example.tex}{\from{pagesLTS.dtx}{example}}%
+}
+
+\obeyspaces
+\Msg{**************************************************************}
+\Msg{*                                                            *}
+\Msg{* To finish the installation you have to move the following  *}
+\Msg{* file into a directory searched by TeX:                     *}
+\Msg{*                                                            *}
+\Msg{* pagesLTS.sty                                               *}
+\Msg{*                                                            *}
+\Msg{* To produce the documentation run the file `pagesLTS.drv'   *}
+\Msg{* through (pdf)LaTeX, e. g.                                  *}
+\Msg{*  pdflatex pagesLTS.dtx                                     *}
+\Msg{*  makeindex -s gind.ist pagesLTS.idx                        *}
+\Msg{*  pdflatex pagesLTS.dtx                                     *}
+\Msg{*  makeindex -s gind.ist pagesLTS.idx                        *}
+\Msg{*  pdflatex pagesLTS.dtx                                     *}
+\Msg{*                                                            *}
+\Msg{* At least three runs are necessary e. g. to get the         *}
+\Msg{*  references right!                                         *}
+\Msg{*                                                            *}
+\Msg{* Happy TeXing!                                              *}
+\Msg{*                                                            *}
+\Msg{**************************************************************}
+
+\endbatchfile
+
+\endinput
+%%
+%% End of file `pagesLTS.ins'.
diff --git a/Master/texmf-dist/tex/latex/pageslts/pagesLTS.sty b/Master/texmf-dist/tex/latex/pageslts/pagesLTS.sty
new file mode 100644
index 00000000000..91f8acb8a0b
--- /dev/null
+++ b/Master/texmf-dist/tex/latex/pageslts/pagesLTS.sty
@@ -0,0 +1,975 @@
+%%
+%% This is file `pagesLTS.sty',
+%% generated with the docstrip utility.
+%%
+%% The original source files were:
+%%
+%% pagesLTS.dtx  (with options: `package')
+%% 
+%% This is a generated file.
+%% 
+%% IMPORTANT NOTICE:
+%% On the first page backslash pagenumbering should be called
+%% (with the appropriate argument out of e.g.
+%%  * roman - Lowercase Roman numerals: i, ii, iii, iv,...
+%%  * Roman - Uppercase Roman numerals: I, II, III, IV,...
+%%  * arabic - Arabic numerals: 1, 2, 3, 4,...
+%%  * alph - Lowercase letters: a, b, c, d,...
+%%  * Alph - Uppercase letters: A, B, C, D,...
+%%  * fnsymbol - Footnote symbols: *, † (ddagger), ‡ (dddagger),
+%%                                 § (mathsection),...
+%% ). The command backslash pagenumbering is renewed, but no change
+%% should be visible to the output text, because only labels are added.
+%% backslash OrigPagenumbering can be used to get the original meaning
+%% of backslash pagenumbering, but in that case this package does not
+%% see the change in the page numbering scheme and will make mistakes.
+%% The package takes options.
+%% 
+%% The usual disclaimers apply:
+%% If it doesn't work right that's your problem.
+%% (Nevertheless, send an e-mail to the maintainer
+%%  when you find an error in this package.)
+%% 
+%% This work may be distributed and/or modified under the
+%% conditions of the LaTeX Project Public License, either
+%% version 1.3c of this license or (at your option) any later
+%% version. This version of this license is in
+%%    http://www.latex-project.org/lppl/lppl-1-3c.txt
+%% and the latest version of this license is in
+%%    http://www.latex-project.org/lppl.txt
+%% and version 1.3c or later is part of all distributions of
+%% LaTeX version 2005/12/01 or later.
+%% 
+%% This work has the LPPL maintenance status "maintained".
+%% 
+%% The Current Maintainer of this work is H.-Martin Muench
+%% (Martin dot Muench at Uni-Bonn dot de).
+%% 
+%% This package first started as a revision of the lastpage
+%% package of Jeffrey P. Goldberg (jeffrey+news at goldmark dot org),
+%% but it became obviouse that a replacement was needed.
+%% 
+%% This work consists of the main source file pagesLTS.dtx
+%% and the derived files
+%%    pagesLTS.sty, pagesLTS.pdf, pagesLTS.ins, pagesLTS.drv,
+%%    pagesLTS-example.tex.
+%% 
+\NeedsTeXFormat{LaTeX2e}[1994/06/01]
+\ProvidesPackage{pagesLTS}[2010/06/03 v1.1b
+            Refers to special pages' numbers/names (HMM)]%
+
+%% Allow for things like\\
+%% |Page \thepage\ (\theCurrentPage; local: \theCurrentPageLocal) of %
+%%  \lastpageref{pagesLTS.roman}(\lastpageref{pagesLTS.roman.local}) + %
+%%  \lastpageref{pagesLTS.Roman}(\lastpageref{pagesLTS.Roman.local}) + %
+%%  \lastpageref{pagesLTS.arabic}(\lastpageref{pagesLTS.arabic.local}) + %
+%%  \lastpageref{pagesLTS.fnsymbol}(\lastpageref{pagesLTS.fnsymbol.local}) + %
+%%  \lastpageref{pagesLTS.alph}(\lastpageref{pagesLTS.alph.local}) + %
+%%  \lastpageref{pagesLTS.Alph}(\lastpageref{pagesLTS.Alph.local}) = %
+%%  \lastpageref{LastPages} pages.|\\
+%% to get\\
+%% 'Page d (57; local: 4) of ii(2) + XX(20) + *(1) + 30(30) + e(5) + C(3) = 61 pages.'.
+
+\RequirePackage{atveryend}[2010/03/24]% v1.5
+\RequirePackage{everyshi}[2001/05/15]%v 3.00
+\RequirePackage{kvoptions}[2010/02/22]% v3.7
+\RequirePackage{undolabl}[2010/06/03]% v1.0b
+%% pagesLTS package uses Prelim@EveryShipout code from the
+%% prelim2e package [2009/05/29 v1.3] by Martin Schr\"{o}der, thanks!
+
+%% pagesLTS may work with earlier versions of those packages,
+%% but this was not tested. Please consider updating your packages
+%% to the most recent version (if they are not already the most
+%% recent version).
+
+%% The recent version of the endfloat package is v2.4i as of 1995/10/11.
+%% The pagesLTS package is not fully compatible with version 2.0
+%% (and earlier) of the endfloat package, because those versions
+%% redefined the \enddocument command.
+
+\SetupKeyvalOptions{family = pagesLTS,prefix = pagesLTS@}
+\DeclareBoolOption[true]{pagecontinue} % \pagesLTS@pagecontinue
+\DeclareStringOption{alphMult}[ab]
+\DeclareStringOption{AlphMulti}[AB]
+\DeclareBoolOption[true]{romanMult}
+\DeclareBoolOption[true]{RomanMulti}
+\DeclareBoolOption[true]{fnsymbolmult}
+
+\ProcessKeyvalOptions*
+
+\def\pagesLTS@zero{0}
+\def\pagesLTS@one{1}
+
+\ifpagesLTS@pagecontinue%
+\PackageInfo{pagesLTS}{Option pagecontinue enabled\MessageBreak%
+  (maybe by default):\MessageBreak%
+  The pagesLTS package will continue the page numbering,\MessageBreak%
+  when the same page numbering scheme is used twice.\MessageBreak%
+  If you do not want this, call pagesLTS with option\MessageBreak%
+  pagecontinue=false\MessageBreak%
+  (or use \ setcounter{page}=1).\MessageBreak%
+}%
+\else%
+\PackageWarningNoLine{pagesLTS}{Option pagecontinue is false:\MessageBreak%
+  The pagesLTS package was used, but the option\MessageBreak%
+  pagecontinue was set to false.\MessageBreak%
+  If you want the page numbers to be continued,\MessageBreak%
+  when the same page numbering scheme is used twice,\MessageBreak%
+  please call pagesLTS with option pagecontinue=true,\MessageBreak%
+  otherwise the page number is reset to one each time\MessageBreak%
+  the page numbering scheme is changed.\MessageBreak%
+  For details please see the documentation!\MessageBreak%
+}%
+\fi%
+
+\def\pagesLTS@ab{ab}
+\def\pagesLTS@bb{bb}
+\def\pagesLTS@ABi{AB}
+\def\pagesLTS@BBi{BB}
+\def\pagesLTS@messageaMz{Option alphMult=0 found:\MessageBreak%
+  The pagesLTS package was used, but the option\MessageBreak%
+  alphMult was set to 0 (zero).\MessageBreak%
+  If you want the page numbers to be extended\MessageBreak%
+  after z, you have to organize this yourself now.\MessageBreak%
+  For automatic continuation, please use the\MessageBreak%
+  alphalph package and call pagesLTS\MessageBreak%
+  with option alphMult=ab (for aa, ab, ac, ad,...) or\MessageBreak%
+  with option alphMult=bb (for aa, bb, cc, dd,...).\MessageBreak%
+  For details please see the documentation!\MessageBreak%
+}
+\def\pagesLTS@messageAMiz{Option AlphMulti=0 found:\MessageBreak%
+  The pagesLTS package was used, but the option\MessageBreak%
+  AlphMulti was set to 0 (zero).\MessageBreak%
+  If you want the page numbers to be extended\MessageBreak%
+  after Z, you have to organize this yourself now.\MessageBreak%
+  For automatic continuation, please use the\MessageBreak%
+  alphalph package and call pagesLTS\MessageBreak%
+  with option AlphMulti=AB (for AA, AB, AC, AD,...) or\MessageBreak%
+  with option AlphMulti=BB (for AA, BB, CC, DD,...).\MessageBreak%
+  For details please see the documentation!\MessageBreak%
+}
+\def\pagesLTS@messagefsmz{Option fnsymbolmult is set to false:\MessageBreak%
+  The pagesLTS package was used, but the option\MessageBreak%
+  fnsymbolmult was set to false.\MessageBreak%
+  If you want the page numbering of the footnotesymbol\MessageBreak%
+  scheme to be extended using the AlphAlph package,\MessageBreak%
+  please call pagesLTS with option fnsymbolmult=true,\MessageBreak%
+  otherwise page numbers of the footnotesymbol scheme\MessageBreak%
+  greater than nine will need to be defined otherwise.\MessageBreak%
+  For details please see the documentation!\MessageBreak%
+}
+
+\ifx\pagesLTS@alphMult\pagesLTS@ab%
+  \relax%
+\else%
+  \ifx\pagesLTS@alphMult\pagesLTS@bb%
+    \relax%
+  \else%
+    \ifx\pagesLTS@alphMult\pagesLTS@zero%
+      \PackageWarningNoLine{pagesLTS}{\pagesLTS@messageaMz }%
+    \else%
+      \PackageError{pagesLTS}{Unknown option value}%
+        {The pagesLTS package was used with option\MessageBreak%
+         alphMult= \pagesLTS@alphMult . Only values\MessageBreak%
+         ab, bb, and 0 (zero) are valid.\MessageBreak%
+         The default ab is set.\MessageBreak%
+         For details please see the documentation!\MessageBreak%
+        }%
+      \setkeys{pagesLTS}{alphMult=ab}%
+    \fi%
+  \fi%
+\fi%
+
+\ifx\pagesLTS@AlphMulti\pagesLTS@ABi%
+  \relax%
+\else%
+  \ifx\pagesLTS@AlphMulti\pagesLTS@BBi%
+    \relax%
+  \else%
+    \ifx\pagesLTS@AlphMulti\pagesLTS@zero%
+      \PackageWarningNoLine{pagesLTS}{\pagesLTS@messageAMiz }%
+    \else%
+      \PackageError{pagesLTS}{Unknown option value}%
+        {The pagesLTS package was used with option\MessageBreak%
+         AlphMulti= \pagesLTS@AlphMulti . Only values\MessageBreak%
+         AB, BB, and 0 (zero) are valid.\MessageBreak%
+         The default AB is set.\MessageBreak%
+         For details please see the documentation!\MessageBreak%
+        }%
+      \setkeys{pagesLTS}{AlphMulti=AB}%
+    \fi%
+  \fi%
+\fi%
+
+\ifpagesLTS@romanMult%
+  \PackageInfo{pagesLTS}{Option romanMult enabled\MessageBreak%
+    (maybe by default):\MessageBreak%
+    The pagesLTS package will extend the page numbering\MessageBreak%
+    of the roman scheme below i with\MessageBreak%
+     0, -i, -ii, -iii, -iv,...\MessageBreak%
+    If you do not want this, call pagesLTS with option\MessageBreak%
+    romanMult=false.\MessageBreak%
+  }%
+\else%
+  \PackageWarningNoLine{pagesLTS}{Option romanMult is set to false:\MessageBreak%
+  The pagesLTS package was used, but the option\MessageBreak%
+  romanMult was set to false.\MessageBreak%
+  If you want the page numbering of the roman scheme\MessageBreak%
+  to be extended below i,\MessageBreak%
+  please call pagesLTS with option romanMult=true,\MessageBreak%
+  otherwise zero and negative page numbers of the\MessageBreak%
+  roman scheme will need to be defined otherwise.\MessageBreak%
+  For details please see the documentation!\MessageBreak%
+  }%
+\fi%
+
+\ifpagesLTS@RomanMulti%
+  \PackageInfo{pagesLTS}{Option RomanMulti enabled\MessageBreak%
+    (maybe by default):\MessageBreak%
+    The pagesLTS package will extend the page numbering\MessageBreak%
+    of the Roman scheme below I with\MessageBreak%
+    0, -I, -II, -III, -IV,...\MessageBreak%
+    If you do not want this, call pagesLTS with option\MessageBreak%
+    RomanMulti=false.\MessageBreak%
+  }%
+\else%
+  \PackageWarningNoLine{pagesLTS}{Option RomanMulti is set to false:\MessageBreak%
+  The pagesLTS package was used, but the option\MessageBreak%
+  RomanMulti was set to false.\MessageBreak%
+  If you want the page numbering of the Roman scheme\MessageBreak%
+  to be extended below i,\MessageBreak%
+  please call pagesLTS with option RomanMulti=true,\MessageBreak%
+  otherwise zero and negative page numbers of the\MessageBreak%
+  Roman scheme will need to be defined otherwise.\MessageBreak%
+  For details please see the documentation!\MessageBreak%
+  }%
+\fi%
+
+\ifpagesLTS@fnsymbolmult%
+  \PackageInfo{pagesLTS}{Option fnsymbolmult enabled\MessageBreak%
+    (maybe by default):\MessageBreak%
+    The pagesLTS package will extend the page numbering\MessageBreak%
+    of the footnotesymbol scheme using the AlphAlph\MessageBreak%
+    package.\MessageBreak%
+    If you do not want this, call pagesLTS with option\MessageBreak%
+    fnsymbolmult=false.\MessageBreak%
+  }%
+\else%
+  \PackageWarningNoLine{pagesLTS}{\pagesLTS@messagefsmz }%
+\fi%
+
+\def\pagesLTS@pnc{0}
+\def\pagesLTS@called{0}
+\def\pagesLTS@fns{fnsymbol}
+\def\pagesLTS@alph{alph}
+\def\pagesLTS@Alph{Alph}
+\def\pagesLTS@AlphAlph{0}
+\def\pagesLTS@hyper{0}
+\def\pagesLTS@rerun{0}
+\def\pagesLTS@eso{0}
+\def\pagesLTS@esov{0}
+\def\lastpageref{\lastpagereftxt}
+\def\pagesLTS@messageNPN{%
+ The pagesLTS package was used, but\MessageBreak%
+ \textbackslash pagenumbering\MessageBreak%
+ was not called at the beginning of the document\MessageBreak%
+ (maybe earlier or later).\MessageBreak%
+ Please use \textbackslash pagenumbering\MessageBreak%
+ (with an argument like arabic, roman, Roman,\MessageBreak%
+ fnsymbol, alph, or Alph) at the beginning\MessageBreak%
+ of your document! Otherwise your document\MessageBreak%
+ will probably compile, but the pagesLTS\MessageBreak%
+ package might not be able to get all labels\MessageBreak%
+ for the references to the respective pages\MessageBreak%
+ right.\MessageBreak%
+ }
+
+\let\OrigPagenumbering\pagenumbering
+
+\newcounter{CurrentPage}
+\setcounter{CurrentPage}{1}
+\def\theCurrentPageLocal{\arabic{pagesLTS.current.local.\pagesLTS@pnc}}
+\newcounter{pagesLTS.pagenr}
+\newcounter{pagesLTS.fnsymbol}
+\newcounter{pagesLTS.fnsymbol.local}
+\newcounter{pagesLTS.fnsymbol.cont}
+\newcounter{pagesLTS.double.0}
+\newcounter{pagesLTS.current.local.0}
+\setcounter{pagesLTS.current.local.0}{1}
+\newcounter{pagesLTS.pnc.0}
+
+\newcommand{\xroman}[1]{%
+  \ifnum\value{#1}>0 %
+    \roman{#1}%
+  \else%
+    \ifnum\value{#1}<0 %
+      -\romannumeral\number-\arabic{#1}
+    \else%
+      0%
+    \fi%
+  \fi%
+  }
+
+\newcommand{\XXRoman}[1]{%
+  \ifnum\value{#1}>0 %
+    \Roman{#1}%
+  \else%
+    \ifnum\value{#1}<0 %
+      -\expandafter\@slowromancap\romannumeral\number-\arabic{#1}@%
+    \else%
+      0%
+    \fi%
+  \fi%
+  }
+
+\newcommand{\lastpages}[2]{%
+  \@ifundefined{c@pagesLTS.#1.#2.local.cnt}{%
+    \newcounter{pagesLTS.#1.#2.local.cnt}}{\relax}%
+  \arabic{pagesLTS.#1.#2.local.cnt}%
+  }
+
+\newcommand{\pagesLTS@ifcounter}[1]{%
+  \@ifundefined{c@#1}{\newcounter{#1}}{\relax}%
+  }
+
+\newcommand{\pagesLTS@writelabel}[1]{%
+  \addtocounter{page}{+1}%
+  \pagesLTS@putlabel{pagesLTS.#1}{\thepage}
+  \addtocounter{page}{-1}%
+  \ifx\pagesLTS@pnc\pagesLTS@zero%
+    \relax%
+  \else%
+    \addtocounter{page}{+1}%
+    \pagesLTS@putlabel{pagesLTS.#1.local}{\theCurrentPageLocal}
+    \addtocounter{page}{-1}%
+  \fi%
+  }
+
+
+%% The following code is from Heiko Oberdiek [2010/04/18],     %%
+%% expanding his alphalph package [2010/04/18] v2.3. (Thanks!) %%
+\newcommand*{\erroralphalph}[2]{%
+  \ifnum\value{#2}>0 %
+    #1{\value{#2}}%
+  \else
+    \ifnum\value{#2}<0 %
+      -#1{\expandafter\@gobble\the\value{#2}}%
+    \else
+      0%
+    \fi
+  \fi
+  }
+%% End of code from Heiko Oberdiek                             %%
+%% Check and Error/Warning messages have been moved to         %%
+%% \EveryShipout, because messages inside e. g. the \pageref   %%
+%% command can cause trouble.                                  %%
+
+
+\newcommand{\expandPagenumbering}[1]{%
+  \let\Origthepage\thepage%
+  \def\pagesLTS@tmpC{arabic}%
+  \ifx\pagesLTS@pnc\pagesLTS@tmpC%
+    \relax%
+  \else%
+    \def\pagesLTS@tmpC{roman}%
+    \ifx\pagesLTS@pnc\pagesLTS@tmpC%
+      \ifpagesLTS@romanMult%
+        \renewcommand*{\thepage}{\xroman{page}}%
+      \fi%
+    \else%
+      \def\pagesLTS@tmpC{Roman}%
+      \ifx\pagesLTS@pnc\pagesLTS@tmpC%
+        \ifpagesLTS@RomanMulti%
+          \renewcommand*{\thepage}{\XXRoman{page}}%
+        \fi%
+      \else%
+        \ifx\pagesLTS@pnc\pagesLTS@alph%
+          \ifx\pagesLTS@alphMult\pagesLTS@ab%
+            \renewcommand*{\thepage}{\erroralphalph{\alphalph}{page}}%
+          \else \ifx\pagesLTS@alphMult\pagesLTS@bb%
+                  \renewcommand*{\thepage}{\erroralphalph{\alphMult}{page}}%
+                \fi%
+          \fi%
+        \else%
+          \ifx\pagesLTS@pnc\pagesLTS@Alph%
+            \ifx\pagesLTS@AlphMulti\pagesLTS@ABi%
+              \renewcommand*{\thepage}{\erroralphalph{\AlphAlph}{page}}%
+            \else \ifx\pagesLTS@AlphMulti\pagesLTS@BBi%
+                    \renewcommand*{\thepage}{\erroralphalph{\AlphMult}{page}}%
+                  \fi%
+            \fi%
+          \else%
+            \ifx\pagesLTS@pnc\pagesLTS@fns%
+              \ifpagesLTS@fnsymbolmult%
+                \renewcommand*{\thepage}{\erroralphalph{\fnsymbolmult}{page}}%
+              \fi%
+            \else%
+              \PackageError{pagesLTS}{unknown page numbering scheme}{%
+                The pagesLTS package encountered the unknown\MessageBreak%
+                page numbering scheme\MessageBreak%
+                `#1'. \MessageBreak%
+                If this is no typing mistake, it might work\MessageBreak%
+                - or it might not work.\MessageBreak%
+                \@ehc%
+                }
+            \fi%
+          \fi%
+        \fi%
+      \fi%
+    \fi%
+  \fi%
+  \let\pagesLTS@tmpC\undefined%
+  }
+
+\renewcommand{\pagenumbering}[1]{%
+  \edef\pagesLTS@tmpA{#1}%
+  \ifx\pagesLTS@pnc\pagesLTS@tmpA%
+    \relax%
+  \else%
+    \ifnum \value{CurrentPage}>1%
+      \addtocounter{page}{-1}%
+      \addtocounter{pagesLTS.current.local.\pagesLTS@pnc}{-1}%
+      \newcounter{pagesLTS.\pagesLTS@pnc.\arabic{pagesLTS.pnc.\pagesLTS@pnc}.local.count}%
+      \setcounter{pagesLTS.\pagesLTS@pnc.\arabic{pagesLTS.pnc.\pagesLTS@pnc}.local.count}{%
+        \value{pagesLTS.current.local.\pagesLTS@pnc}}%
+      \ifx\pagesLTS@pnc\pagesLTS@fns%
+        \ifnum \value{pagesLTS.pnc.\pagesLTS@pnc}>1%
+          \pagesLTS@ifcounter{pagesLTS.tmpa}%
+          \setcounter{pagesLTS.tmpa}{\value{pagesLTS.pnc.\pagesLTS@pnc}}%
+          \addtocounter{pagesLTS.tmpa}{-1}%
+          \pagesLTS@ifcounter{pagesLTS.tmpb}%
+          \addtocounter{pagesLTS.tmpb}{\value{pagesLTS.\pagesLTS@pnc.\arabic{pagesLTS.tmpa}.local.count}}%
+          \addtocounter{pagesLTS.\pagesLTS@pnc.\arabic{pagesLTS.pnc.\pagesLTS@pnc}.local.count}{%
+            -\value{pagesLTS.tmpb}}%
+        \fi%
+      \else%
+        \pagesLTS@writelabel{\pagesLTS@pnc.\arabic{pagesLTS.pnc.\pagesLTS@pnc}}%
+        \ifnum \value{pagesLTS.pnc.\pagesLTS@pnc}<2%
+          \pagesLTS@writelabel{\pagesLTS@pnc}%
+        \else%
+          \pagesLTS@ifcounter{pagesLTS.tmpa}%
+          \setcounter{pagesLTS.tmpa}{\value{pagesLTS.pnc.\pagesLTS@pnc}}%
+          \addtocounter{pagesLTS.tmpa}{-1}%
+          \pagesLTS@ifcounter{pagesLTS.\pagesLTS@pnc.done}%
+          \addtocounter{pagesLTS.\pagesLTS@pnc.done}{%
+            \value{pagesLTS.\pagesLTS@pnc.\arabic{pagesLTS.tmpa}.local.count}}%
+          \addtocounter{pagesLTS.\pagesLTS@pnc.\arabic{pagesLTS.pnc.\pagesLTS@pnc}.local.count}{%
+            -\value{pagesLTS.\pagesLTS@pnc.done}}%
+        \fi%
+        \if@filesw%
+          \immediate\write\@auxout{\string
+            \pagesLTS@ifcounter{pagesLTS.\pagesLTS@pnc.\arabic{pagesLTS.pnc.\pagesLTS@pnc}.local.cnt}}%
+        \fi%
+        \edef\pagesLTS@tmpB{\arabic{pagesLTS.\pagesLTS@pnc.\arabic{pagesLTS.pnc.\pagesLTS@pnc}.local.count}}%
+        \if@filesw%
+          \immediate\write\@auxout{\string
+            \setcounter{pagesLTS.\pagesLTS@pnc.\arabic{pagesLTS.pnc.\pagesLTS@pnc}.local.cnt}{\pagesLTS@tmpB}}%
+        \fi%
+      \fi%
+      \setcounter{pagesLTS.double.\pagesLTS@pnc}{\value{page}}%
+      \addtocounter{pagesLTS.current.local.\pagesLTS@pnc}{+1}%
+      \addtocounter{page}{+1}%
+      \global\edef\pagesLTS@pnc{#1}%
+      \OrigPagenumbering{#1}%
+      \expandPagenumbering{#1}
+      \pagesLTS@ifcounter{pagesLTS.pnc.\pagesLTS@pnc}%
+      \addtocounter{pagesLTS.pnc.\pagesLTS@pnc}{1}%
+      \pagesLTS@ifcounter{pagesLTS.double.\pagesLTS@pnc}%
+      \addtocounter{pagesLTS.double.\pagesLTS@pnc}{1}%
+      \ifpagesLTS@pagecontinue%
+        \setcounter{page}{\value{pagesLTS.double.\pagesLTS@pnc}}%
+      \else%
+        \setcounter{page}{1}%
+      \fi%
+      \pagesLTS@ifcounter{pagesLTS.current.local.\pagesLTS@pnc}%
+      \ifnum \value{pagesLTS.double.\pagesLTS@pnc}=1%
+        \setcounter{pagesLTS.current.local.\pagesLTS@pnc}{1}%
+      \fi%
+    \else%
+      %% before the first page has shiped out
+      \global\edef\pagesLTS@pnc{#1}%
+      \countdef\c@page=0 \c@page=1
+      \def\cl@page{}
+      \global\c@page \@ne
+      \global\def\thepage{\csname \expandafter @\pagesLTS@pnc \endcsname \c@page}%
+      \expandPagenumbering{#1}
+      \pagesLTS@ifcounter{pagesLTS.pnc.\pagesLTS@pnc}%
+      \setcounter{pagesLTS.pnc.\pagesLTS@pnc}{1}%
+      \pagesLTS@ifcounter{pagesLTS.double.\pagesLTS@pnc}%
+      \setcounter{pagesLTS.double.\pagesLTS@pnc}{1}%
+      \pagesLTS@ifcounter{pagesLTS.current.local.\pagesLTS@pnc}%
+      \setcounter{pagesLTS.current.local.\pagesLTS@pnc}{1}%
+    \fi%
+    \gdef\pagesLTS@called{1}%
+  \fi%
+  \let\pagesLTS@tmpA\undefined%
+  \let\pagesLTS@tmpB\undefined%
+  }
+
+\newcommand{\lastpagereftxt}[1]{%
+  \def\pagesLTS@tmpA{#1}%
+  \def\pagesLTS@tmpB{pagesLTS.fnsymbol.local}%
+  \ifx\pagesLTS@tmpA\pagesLTS@tmpB%
+    \ifx\pagesLTS@hyper\pagesLTS@one%
+      \href{\#pagesLTS.fnsymbol.local.\arabic{pagesLTS.fnsymbol.local}}%
+        {\arabic{pagesLTS.fnsymbol.local}}%
+    \else \arabic{pagesLTS.fnsymbol.local}%
+    \fi%
+  \else%
+    \pageref{#1}%
+  \fi%
+  \let\pagesLTS@tmpA\undefined%
+  \let\pagesLTS@tmpB\undefined%
+  }
+
+\newcommand{\lastpagerefend}[1]{%
+  \def\pagesLTS@tmpA{#1}%
+  \def\pagesLTS@tmpB{pagesLTS.fnsymbol.local}%
+  \ifx\pagesLTS@tmpA\pagesLTS@tmpB%
+    \ifx\pagesLTS@hyper\pagesLTS@one%
+      \href{\#pagesLTS.fnsymbol.local.\arabic{pagesLTS.fnsymbol.local}}%
+        {\arabic{pagesLTS.fnsymbol.local}}%
+    \else \arabic{pagesLTS.fnsymbol.local}%
+    \fi%
+  \else%
+    \def\pagesLTS@tmpB{pagesLTS.fnsymbol}%
+    \ifx\pagesLTS@tmpA\pagesLTS@tmpB%
+      \ifx\pagesLTS@hyper\pagesLTS@one%
+        \href{\#pagesLTS.fnsymbol.local.\arabic{pagesLTS.fnsymbol.local}}%
+          {\pagesLTS.lastpage}%
+      \else \pageref{pagesLTS.fnsymbol}%
+      \fi%
+    \else%
+      \def\pagesLTS@tmpB{LastPage}%
+      \ifx\pagesLTS@tmpA\pagesLTS@tmpB%
+        \ifx\pagesLTS@hyper\pagesLTS@one%
+          \href{\#pagesLTS.fnsymbol.local.\pagesLTS@eso}%
+            {\pagesLTS.lastpage}%
+        \else \pageref{LastPage}%
+        \fi%
+      \else%
+        \def\pagesLTS@tmpB{VeryLastPage}%
+        \ifx\pagesLTS@tmpA\pagesLTS@tmpB%
+          \ifx\pagesLTS@hyper\pagesLTS@one%
+            \href{\#pagesLTS.fnsymbol.local.\arabic{pagesLTS.fnsymbol.local}}%
+              {\pagesLTS.lastpage}%
+          \else \pageref{VeryLastPage}%
+          \fi%
+        \else%
+          \def\pagesLTS@tmpB{LastPages}%
+          \ifx\pagesLTS@tmpA\pagesLTS@tmpB%
+            \ifx\pagesLTS@hyper\pagesLTS@one%
+              \href{\#pagesLTS.fnsymbol.local.\arabic{pagesLTS.fnsymbol.local}}%
+                {\arabic{pagesLTS.pagenr}}%
+            \else \pageref{LastPages}%
+            \fi%
+          \else%
+            \pageref{#1}%
+          \fi%
+        \fi%
+      \fi%
+    \fi%
+  \fi%
+  \let\pagesLTS@tmpA\undefined%
+  \let\pagesLTS@tmpB\undefined%
+  }
+
+\newcommand{\@pagesLTS@Prelim@EveryShipout}{%
+%% The following code is from the prelim2e package             %%
+%% [2009/05/29 v1.3] by Martin Schr\"{o}der (Thanks!):         %%
+  \bgroup
+    \dimen\z@=\wd\@cclv
+    \dimen\@ne=\ht\@cclv
+    \dimen\tw@=\dp\@cclv
+    \dimen\thr@@=\dimen1
+    \advance\dimen\thr@@ by \dimen\tw@
+    \global\setbox\@cclv\vbox to \dimen\thr@@{%
+      \hb@xt@\dimen\z@{%
+        \box\@cclv%
+        \hss%
+        }%
+      \vbox to \z@{%
+        \hb@xt@\dimen\z@{%
+          \let\protect\relax
+%% Code not from prelim2e package:                             %%
+          \ifx\pagesLTS@pnc\pagesLTS@fns%
+            \addtocounter{pagesLTS.fnsymbol.cont}{1}%
+            \ifx\pagesLTS@hyper\pagesLTS@one%
+              \phantomsection%
+              \hypertarget{pagesLTS.fnsymbol.local.\arabic{pagesLTS.fnsymbol.cont}}{}%
+            \fi%
+            \ifnum \pagesLTS@esov=\pagesLTS@zero%
+              \label{pagesLTS.fnsymbol}%
+            \else%
+              \overridelabel{pagesLTS.fnsymbol}%
+            \fi%
+          \else%
+            \ifx\pagesLTS@hyper\pagesLTS@one%
+              \phantomsection%
+            \fi%
+            \if@filesw%
+              \overridelabel{pagesLTS.\pagesLTS@pnc}%
+              \immediate\write\@auxout{\string
+                \undonewlabel{pagesLTS.\pagesLTS@pnc.local}{\on@line}}%
+            \fi%
+            \addtocounter{page}{+1}
+            \pagesLTS@putlabel{pagesLTS.\pagesLTS@pnc.local}{\theCurrentPageLocal}%
+            \addtocounter{page}{-1}
+          \fi%
+%% Code from prelim2e package again:                           %%
+        }%
+        \vss%
+      }%
+      \vss%
+    }%
+    \wd\@cclv=\dimen\z@
+    \ht\@cclv=\dimen\@ne
+    \dp\@cclv=\dimen\tw@
+  \egroup
+%% End of code from the prelim2e package.                      %%
+  }
+
+\EveryShipout{%
+  \ifnum\value{page}>0%
+    \relax%
+  \else
+    \ifnum\value{page}=0%
+      \PackageWarning{pagesLTS}{%
+        Counter `page' is zero!\MessageBreak%
+        If the page numbering scheme is not arabic\MessageBreak%
+        and further not extended\MessageBreak%
+        (see Page counter overflow in the pagesLTS\MessageBreak%
+        documentation), without other measures\MessageBreak%
+        this will lead to a counter overflow.\MessageBreak%
+      }
+    \else%
+      \ifnum\value{page}<0%
+        \PackageWarning{pagesLTS}{%
+          Counter `page' is negative: `\the\value{page}'!\MessageBreak%
+          If the page numbering scheme is not arabic\MessageBreak%
+          and further not extended\MessageBreak%
+          (see Page counter overflow in the pagesLTS\MessageBreak%
+          documentation), without other measures\MessageBreak%
+          this will lead to a counter overflow.\MessageBreak%
+        }
+      \else%
+        \PackageError{pagesLTS}{%
+          Counter `page' does not have a recognized value:\MessageBreak%
+          `\the\value{page}'\MessageBreak%
+          \@ehd \MessageBreak%
+          }
+      \fi%
+    \fi%
+  \fi%
+  \ifnum \value{CurrentPage}=1% This is the first shipout!
+    \ifx\pagesLTS@called\pagesLTS@zero
+      \PackageError{pagesLTS}{pagenumbering missing}{\pagesLTS@messageNPN }%
+      \newcounter{pagesLTS@tmpD}%
+      \setcounter{pagesLTS@tmpD}{\value{page}}%
+%% Code from Andres L\"{o}h, Universiteit Utrecht (NL)         %%
+      \def\extract#1{\expandafter\extract@ #1\END}
+      \def\extract@#1\csname @#2\endcsname#3\END{#2}
+      \edef\pagesLTS@tmpQ{\extract\thepage}%
+%% End of code from Andres L\"{o}h                             %%
+      \let\pagesLTS@tmpP\pagesLTS@tmpQ%
+      \def\pagesLTS@pnc{0}%
+      \pagenumbering{\pagesLTS@tmpP}%
+      \setcounter{page}{\value{pagesLTS@tmpD}}%
+    \fi%
+    \pagesLTS@writelabel{0}%
+  \fi%
+  \ifx\pagesLTS@pnc\pagesLTS@fns%
+    \@pagesLTS@Prelim@EveryShipout%
+    \gdef\pagesLTS@esov{\arabic{pagesLTS.fnsymbol.cont}}%
+  \else%
+    \ifnum \value{pagesLTS.pnc.\pagesLTS@pnc}>1%
+      \@pagesLTS@Prelim@EveryShipout%
+    \fi%
+  \fi%
+  \addtocounter{CurrentPage}{1}%
+  \addtocounter{pagesLTS.current.local.\pagesLTS@pnc}{1}%
+  }
+
+\newcommand{\pagesLTS@putlabelhyper}[2]{%
+  \ifHy@pageanchor \relax%
+  \else%
+    \PackageError{pagesLTS}{hyperref option pageanchor disabled}{%
+      The \string\lastpageref{#1} link doesn't work\MessageBreak%
+      using hyperref with disabled option `pageanchor'.\MessageBreak%
+    }%
+  \fi
+%% The following code is from the hyperref package             %%
+%% [2010/04/17 v6.80x] by Heiko Oberdiek (Thanks!).            %%
+  \if@filesw
+    \begingroup
+      \let\@number\@firstofone
+      \ifHy@pageanchor
+        \ifHy@hypertexnames
+          \ifHy@plainpages
+            \def\Hy@temp{\arabic{page}}%
+          \else
+            \Hy@unicodefalse
+%% Code not from hyperref package:                             %%
+%% The following lines are modified from the hyperref package. %%
+%% Without the modification, after the first shipout "PD1" is  %%
+%% inserted each time |\pdfstringdef\Hy@temp{\thepage}| is     %%
+%% executed (if |fnsymbol| is not used).                       %%
+            \ifnum \value{CurrentPage}=1%
+              \ifx\pagesLTS@pnc\pagesLTS@fns%
+                \pdfstringdef\Hy@temp{\thepage}%
+              \else%
+                \def\Hy@temp{\thepage}%
+              \fi%
+            \else%
+              \pdfstringdef\Hy@temp{\thepage}%
+            \fi%
+%% Code from hyperref package again:                           %%
+          \fi
+        \else
+          \def\Hy@temp{\the\Hy@pagecounter}%
+        \fi
+      \fi
+%% End of code from the hyperref package.                      %%
+%% (The following four lines are modified                      %%
+%%  from the hyperref package.)                                %%
+      \immediate\write\@auxout{\string
+        \newlabel{#1}{{}{#2}{}{\ifHy@pageanchor page.\Hy@temp\fi}{}}}%
+    \endgroup%
+  \fi%
+  }
+
+\newcommand{\pagesLTS@putlabel}[2]{%
+  \addtocounter{page}{-1}%
+  \ifx\pagesLTS@hyper\pagesLTS@one%
+    \pagesLTS@putlabelhyper{#1}{#2}%
+  \else%
+    \if@filesw%
+      \immediate\write\@auxout{\string
+        \newlabel{#1}{{}{#2}}}%
+    \fi%
+  \fi%
+  \addtocounter{page}{+1}%
+  }
+
+\newcommand{\pagesLTS@putlabels}{%
+  \addtocounter{page}{-1}%
+  \addtocounter{CurrentPage}{-1}%
+  \addtocounter{pagesLTS.current.local.\pagesLTS@pnc}{-1}%
+  \ifx\pagesLTS@pnc\pagesLTS@zero%
+   \PackageWarning{pagesLTS}{No page numbering scheme found:\MessageBreak%
+     \pagesLTS@messageNPN }%
+  \else%
+    \pagesLTS@writelabel{\pagesLTS@pnc.\arabic{pagesLTS.pnc.\pagesLTS@pnc}}%
+    \ifnum \value{pagesLTS.pnc.\pagesLTS@pnc}<2%
+      \ifx\pagesLTS@pnc\pagesLTS@fns%
+        \relax%
+      \else%
+        \pagesLTS@writelabel{\pagesLTS@pnc}%
+      \fi%
+    \fi%
+  \fi%
+  \addtocounter{page}{+1}%
+  \pagesLTS@putlabel{LastPages}{\theCurrentPage}
+  \addtocounter{CurrentPage}{1}%
+  \addtocounter{pagesLTS.current.local.\pagesLTS@pnc}{1}%
+  }
+
+\AtBeginDocument{%
+  \if@filesw \relax%
+  \else%
+    \PackageError{pagesLTS}{No auxiliary file allowed.}%
+     {The pagesLTS package was not allowed to write to an .aux file.\MessageBreak%
+      This package does not work without access to an .aux file.\MessageBreak%
+      Press Ctrl+Z to exit.\MessageBreak%
+     }%
+    % \endinput
+  \fi%
+  \@ifpackageloaded{endfloat}%
+   {\@ifpackagelater{endfloat}{1992/03/31}% April 1992 v2.0
+    {\@ifpackagelater{endfloat}{1995/10/10}{% 1995/10/11 v2.4i
+       \relax}%
+     {\PackageWarningNoLine{pagesLTS}{Old endfloat package detected:\MessageBreak%
+        There is a newer version of the endfloat package available.\MessageBreak%
+        Please consider updating your version.\MessageBreak%
+        The pagesLTS package might be incompatible with\MessageBreak%
+        your current endfloat package.\MessageBreak%
+      }%
+     }%
+     {\PackageError{pagesLTS}{Incompatible, very old endfloat package detected.}%
+      {The very old version 2.0 (and earlier) of the\MessageBreak%
+       endfloat package actually redefined the \ enddocument,\MessageBreak%
+       and so interferred drastically with the LaTeX2e commands\MessageBreak%
+       which make use of \ AtEndDocument.\MessageBreak%
+       Newer versions of the endfloat package exists\MessageBreak%
+       (at least: v2.4i as of 1995/10/11)\MessageBreak%
+       in modern documentation form,\MessageBreak%
+       which should be available from CTAN.\MessageBreak%
+       Please update your endfloat package\MessageBreak%
+       for use with the pagesLTS package.\MessageBreak %
+      }%
+     }%
+    }%
+   }{}%
+  \@ifpackageloaded{lastpage}%
+   {\PackageWarning{pagesLTS}{Incompatible package lastpage detected:\MessageBreak%
+      Package pagesLTS was loaded, but also the old\MessageBreak%
+      lastpage package.\MessageBreak%
+      pagesLTS has all functionality of the lastpage\MessageBreak%
+      package (and more), so just remove the lastpage\MessageBreak%
+      package from your document.\MessageBreak%
+      pagesLTS will now ''kill'' the lastpage@putlabel\MessageBreak%
+      command of the lastpage package.\MessageBreak%
+    }%
+    \gdef\lastpage@putlabel{\relax}%
+   }{}%
+  \@ifpackageloaded{alphalph}%
+    {\PackageInfo{pagesLTS}{Package AlphAlph detected.\MessageBreak%
+       pagesLTS supports alphalph. Congratulations!\MessageBreak%
+       }%
+     \global\def\pagesLTS@AlphAlph{1}%
+     \newalphalph{\AlphMult}[mult]{\@Alph}{26}%
+     \newalphalph{\alphMult}[mult]{\@alph}{26}%
+     \newalphalph{\fnsymbolmult}[mult]{\@fnsymbol}{5}%
+    }%
+    {\ifx\pagesLTS@alphMult\pagesLTS@zero%
+       \PackageWarning{pagesLTS}{\pagesLTS@messageaMz }%
+     \else%
+       \PackageError{pagesLTS}{Package AlphAlph not loaded}%
+         {Package AlphAlph was not loaded, but package pagesLTS\MessageBreak%
+          was called without option alphMult=0 (zero).\MessageBreak%
+          Either load package AlphAlph,\MessageBreak%
+          or give option alphMult=0 (zero) to the pagesLTS package.\MessageBreak%
+         }%
+     \fi%
+     \ifx\pagesLTS@AlphMulti\pagesLTS@zero%
+       \PackageWarning{pagesLTS}{\pagesLTS@messageAMiz }%
+       \relax%
+     \else%
+       \PackageError{pagesLTS}{Package AlphAlph not loaded}%
+         {Package AlphAlph was not loaded, but package pagesLTS\MessageBreak%
+          was called without option AlphMulti=0 (zero).\MessageBreak%
+          Either load package AlphAlph,\MessageBreak%
+          or give option AlphMulti=0 (zero) to the pagesLTS package.\MessageBreak%
+         }%
+     \fi%
+     \ifpagesLTS@fnsymbolmult%
+       \PackageError{pagesLTS}{Package AlphAlph not loaded}%
+         {Package AlphAlph was not loaded, but package pagesLTS\MessageBreak%
+          was called without option fnsymbolmult=false.\MessageBreak%
+          Either load package AlphAlph,\MessageBreak%
+          or give option fnsymbolmult=false to the pagesLTS package.\MessageBreak%
+         }%
+     \else%
+       \PackageWarning{pagesLTS}{\pagesLTS@messagefsmz }%
+     \fi%
+    }%
+  \@ifpackageloaded{hyperref}%
+    {\PackageInfo{pagesLTS}{Package hyperref detected.\MessageBreak%
+       pagesLTS supports hyperref. Congratulations!\MessageBreak%
+       }%
+     \global\def\pagesLTS@hyper{1}%
+     \@ifpackagelater{hyperref}{2010/04/16}{% 2010/04/17 v6.80x
+       \relax}{%
+       \PackageWarningNoLine{pagesLTS}{Old hyperref package detected:\MessageBreak%
+         There is a newer version of the\MessageBreak%
+         hyperref package available.\MessageBreak%
+         Please consider updating your version.\MessageBreak%
+       }%
+     }%
+     %% pagesLTS supports the use of the package hyperref by
+     %% Heiko Oberdiek (hyperref version 2010/04/17 v6.80x).
+     %% pagesLTS may work with earlier versions of this packages,
+     %% but this was not tested.
+    }%
+    {\PackageWarning{pagesLTS}{Package hyperref NOT detected.\MessageBreak%
+       pagesLTS would support hyperref. The page references\MessageBreak%
+       will NOT be hyperlinked!\MessageBreak }%
+    }%
+  }
+
+\AtEndDocument{%
+  \message{AED: pagesLTS setting LastPage}%
+  \clearpage%
+  \ifx\pagesLTS@pnc\pagesLTS@fns%
+    \def\pagesLTS@tmpA{\arabic{pagesLTS.fnsymbol.local}}%
+    \ifnum \pagesLTS@eso=\pagesLTS@tmpA%
+      \gdef\pagesLTS@rerun{0}%
+    \else%
+      \gdef\pagesLTS@rerun{1}%
+    \fi%
+    \if@filesw%
+      \immediate\write\@auxout{\string
+        \gdef\string\pagesLTS@eso{\pagesLTS@tmpA}}%
+    \fi%
+  \fi%
+  \pagesLTS@putlabel{LastPage}{\thepage}%
+  \let\pagesLTS@tmpA\undefined%
+  }
+
+\AfterLastShipout{%
+  \if@filesw%
+    \immediate\write\@auxout{\string
+      \setcounter{pagesLTS.fnsymbol.local}{\pagesLTS@esov}}%
+  \fi%
+  \ifx\pagesLTS@hyper\pagesLTS@one%
+    \ifx\pagesLTS@pnc\pagesLTS@fns%
+      \if@filesw%
+        \immediate\write\@auxout{\string
+          \gdef\string\lastpageref{\string\lastpagerefend}}%
+      \fi%
+    \fi%
+  \fi%
+  \pagesLTS@ifcounter{pagesLTS.\pagesLTS@pnc.\arabic{pagesLTS.pnc.\pagesLTS@pnc}.local.count}%
+  \setcounter{pagesLTS.\pagesLTS@pnc.\arabic{pagesLTS.pnc.\pagesLTS@pnc}.local.count}{%
+    \value{pagesLTS.current.local.\pagesLTS@pnc}}%
+  \addtocounter{pagesLTS.\pagesLTS@pnc.\arabic{pagesLTS.pnc.\pagesLTS@pnc}.local.count}{-1}
+  \ifnum \value{pagesLTS.pnc.\pagesLTS@pnc}>1%
+    \pagesLTS@ifcounter{pagesLTS.tmpA}%
+    \setcounter{pagesLTS.tmpA}{\value{pagesLTS.pnc.\pagesLTS@pnc}}%
+    \addtocounter{pagesLTS.tmpA}{-1}%
+    \pagesLTS@ifcounter{pagesLTS.tmpB}%
+    \addtocounter{pagesLTS.tmpB}{\value{pagesLTS.\pagesLTS@pnc.\arabic{pagesLTS.tmpA}.local.count}}%
+    \addtocounter{pagesLTS.\pagesLTS@pnc.\arabic{pagesLTS.pnc.\pagesLTS@pnc}.local.count}{%
+      -\value{pagesLTS.tmpB}}%
+  \fi%
+  \if@filesw%
+    \immediate\write\@auxout{\string
+      \pagesLTS@ifcounter{pagesLTS.\pagesLTS@pnc.\arabic{pagesLTS.pnc.\pagesLTS@pnc}.local.cnt}}%
+    \edef\pagesLTS@tmpA{\arabic{pagesLTS.\pagesLTS@pnc.\arabic{pagesLTS.pnc.\pagesLTS@pnc}.local.count}}%
+    \immediate\write\@auxout{\string
+      \setcounter{pagesLTS.\pagesLTS@pnc.\arabic{pagesLTS.pnc.\pagesLTS@pnc}.local.cnt}{\pagesLTS@tmpA}}%
+    \let\pagesLTS@tmpA\undefined%
+  \fi%
+  \addtocounter{page}{-1}%
+  \edef\pagesLTS@tmpA{\thepage}%
+  \if@filesw%
+    \immediate\write\@auxout{\string
+      \gdef\string\pagesLTS.lastpage{\pagesLTS@tmpA}}%
+  \fi%
+  \addtocounter{page}{+1}%
+  \addtocounter{CurrentPage}{-1}%
+  \def\pagesLTS@tmpB{\arabic{CurrentPage}}%
+  \if@filesw%
+    \immediate\write\@auxout{\string
+      \setcounter{pagesLTS.pagenr}{\pagesLTS@tmpB}}%
+  \fi%
+  \addtocounter{CurrentPage}{+1}%
+  \message{AED: pagesLTS setting VeryLastPage via AfterLastShipout}%
+  \pagesLTS@putlabel{VeryLastPage}{\thepage}%
+  \message{AED: pagesLTS setting LastPages via AfterLastShipout}%
+  \pagesLTS@putlabels%
+  \let\pagesLTS@tmpA\undefined%
+  \let\pagesLTS@tmpB\undefined%
+  }
+
+\AtVeryEndDocument{%
+  \ifx\pagesLTS@rerun\pagesLTS@one%
+    \PackageWarningNoLine{pagesLTS}{Label(s) may have changed.\MessageBreak%
+      Rerun to get cross-references right.\MessageBreak%
+      }%
+  \fi%
+  }
+
+\endinput
+%%
+%% End of file `pagesLTS.sty'.
diff --git a/Master/tlpkg/bin/tlpkg-ctan-check b/Master/tlpkg/bin/tlpkg-ctan-check
index badfb962e19..1ab58d9e7c0 100755
--- a/Master/tlpkg/bin/tlpkg-ctan-check
+++ b/Master/tlpkg/bin/tlpkg-ctan-check
@@ -226,7 +226,7 @@ my @TLP_working = qw(
   oberdiek ocgtools ocr-latex octavo ofs ogham oldlatin oldstyle
     onlyamsmath onrannual opcit optional
     ordinalpt orkhun ot-tableau othello oubraces outline overpic
-  pagecont pagenote pagerange paper papercdcase papertex
+  pagecont pagenote pagerange pageslts paper papercdcase papertex
     parallel paresse parrun passivetex 
     patch patchcmd patgen2-tutorial pauldoc pax pbox pb-diagram
     pdf14 pdf-forms-tutorial-de pdf-forms-tutorial-en
diff --git a/Master/tlpkg/libexec/ctan2tds b/Master/tlpkg/libexec/ctan2tds
index b4788f4bc52..56db4143be5 100755
--- a/Master/tlpkg/libexec/ctan2tds
+++ b/Master/tlpkg/libexec/ctan2tds
@@ -933,6 +933,7 @@ $standardtex='\.(.bx|cfg|sty|clo|ldf|cls|def|fd|cmap|4ht)$';
  'notes',	'[^s]\.(eps|pdf|png)|' . $standardtex,  # not notes.pdf
  'ntheorem',	'\.sty|\.std',
  'ofs',		'^ofs\.tex|ofsdef\.tex|ofs-.*\.tex|\.sty|a.*\.tex|.*fn\.tex',
+ 'pageslts',	'\.sty|[^c]\.cfg',	# omit ltxdoc.cfg, would be system-wide
  'patch',	'\.tex',
  'pdf-trans',	'pdf-trans.tex',
  'pdfcprot',	'\.cpa|\.sty',
diff --git a/Master/tlpkg/tlpsrc/collection-latexextra.tlpsrc b/Master/tlpkg/tlpsrc/collection-latexextra.tlpsrc
index 29db7c5c9af..d76878a60a6 100644
--- a/Master/tlpkg/tlpsrc/collection-latexextra.tlpsrc
+++ b/Master/tlpkg/tlpsrc/collection-latexextra.tlpsrc
@@ -437,6 +437,7 @@ depend overpic
 depend pagecont
 depend pagenote
 depend pagerange
+depend pageslts
 depend paper
 depend papercdcase
 depend papertex
diff --git a/Master/tlpkg/tlpsrc/pageslts.tlpsrc b/Master/tlpkg/tlpsrc/pageslts.tlpsrc
new file mode 100644
index 00000000000..e69de29bb2d
--- /dev/null
+++ b/Master/tlpkg/tlpsrc/pageslts.tlpsrc