rm newalg, nonfree

git-svn-id: svn://tug.org/texlive/trunk@10846 c570f23f-e606-0410-a88d-b1316a301751

8 files changed, 2 insertions, 631 deletions

diff --git a/Master/texmf-dist/doc/latex/newalg/newalg.dvi b/Master/texmf-dist/doc/latex/newalg/newalg.dvi
deleted file mode 100644
index 3025befde37..00000000000
--- a/Master/texmf-dist/doc/latex/newalg/newalg.dvi
+++ /dev/null
diff --git a/Master/texmf-dist/source/latex/newalg/README b/Master/texmf-dist/source/latex/newalg/README
deleted file mode 100644
index defc3aeb1b5..00000000000
--- a/Master/texmf-dist/source/latex/newalg/README
+++ /dev/null
@@ -1,25 +0,0 @@
-			   The newalg package
-                           ------------------
-
-Introduction
-------------
-
-The package contains the definitions that are needed to typeset code
-algorithms in a pretty way.  The Formatted algorithms follow the style
-set forth in the book ``Introduction to Algorithms'' by Corman,
-Leiserson and Rivest.
-
-Read the included documentation for usage and examples.
-
-Installation
-------------
-
-To generate the newalg.sty file run "latex newalg.ins".  The generated
-file can be copied to the LaTeX macros directory.
-
-To generate the documentation run latex 3 times on the file newalg.dtx.
-This must be done after the newalg.sty file is generated (Does not need
-to be installed into the tree).
-
-
-
diff --git a/Master/texmf-dist/source/latex/newalg/newalg.dtx b/Master/texmf-dist/source/latex/newalg/newalg.dtx
deleted file mode 100644
index 50c0b7c8646..00000000000
--- a/Master/texmf-dist/source/latex/newalg/newalg.dtx
+++ /dev/null
@@ -1,449 +0,0 @@
-% \iffalse
-%<*driver>
-\documentclass{ltxdoc}
-\usepackage{newalg}
- %\EnableCrossrefs         
- \DisableCrossrefs % Say \DisableCrossrefs if index is ready
-\RecordChanges                  % Gather update information
- \OnlyDescription  % comment out for implementation details
- %\OldMakeindex     % use if your MakeIndex is pre-v2.9
-\begin{document}
-   \DocInput{newalg.dtx}
-\end{document}
-%</driver>
-%<package>\NeedsTeXFormat{LaTeX2e}[1994/06/01]
-%<package>\ProvidesPackage{newalg}[1994/12/15 Format code algorithms nicely]
-% \fi
-%
-% \title{The \texttt{newalg} Package}
-% \author{Rick Farnbach\thanks{Email:  rick\_farnbach@mentorg.com} \\
-%        Paul Furnanz\thanks{Email:  paul\_furnanz@mentrog.com}}
-% \maketitle
-%
-% \begin{abstract}
-%   The package contains the definitions that are needed to typeset code
-%   algorithms in a pretty way.  The Formatted algorithms follow the style
-%   set forth in the book ``Introduction to Algorithms'' by Corman,
-%   Leiserson and Rivest.
-% \end{abstract}
-% \newif\ifmulticols
-% \IfFileExists{multicol.sty}{\multicolstrue}{}
-%
-% \tableofcontents
-%
-% \section{Introduction}
-%
-% The \LaTeX{} macros which are described here allow descriptions of
-% algorithms to be typeset in a pretty way.  This is very useful for
-% functional specifications for a software project or to document an
-% algorithm for a white paper.
-%
-% The idea for this macro package comes from the book ``Introduction to
-% Algorithms'' by Cormen, Leiserson, and Rivest.  Any examples in this
-% document come directly from that book and should not be reproduced
-% without proper attribution.
-%
-% \section{User Interface}
-%
-% \subsection{The \textsf{algorithm} environment}
-%
-% \DescribeEnv{algorithm}
-% Use the \textsf{algorithm} environment to typeset algorithm code.
-% This environment makes several new commands available that help in
-% typesetting code algorithms.  The \textsf{algorithm} environment uses
-% math mode and the array enviroment to do the typesetting.  Everything
-% typed is interpreted in math mode.  To leave math mode use the
-% \textsf{text} command.  Here is an example of the output produced by
-% using the \textsf{algorithm} environment.
-%
-% \showboxdepth=10
-% \showboxbreadth=10
-% \[
-% \parbox{2.0in}{\hbadness2000
-%     \begin{algorithm}{Allocate-Object}{}
-%       \begin{IF}{free = \NIL}
-%         \ERROR{out of space}
-%       \ELSE
-%         x \= free \\
-%         free \= next[x] \\
-%         \RETURN x
-%       \end{IF}
-%     \end{algorithm}}
-% \hspace{10pt}
-% \vcenter{\hsize=2.6in
-%    \begin{verbatim}
-%     \begin{algorithm}{Allocate-Object}{}
-%       \begin{IF}{free = \NIL}
-%         \ERROR{out of space}
-%       \ELSE
-%         x \= free \\
-%         free \= next[x] \\
-%         \RETURN x
-%       \end{IF}
-%     \end{algorithm}
-%     \end{verbatim}
-% }\]
-%
-% \subsection{Flow Control Environments}
-%
-% \DescribeEnv{IF}
-% Use the environment \textsf{IF} to format an if statement.  When
-% inside the \textsf{IF} environment, the \textsf{ELSE} macro becomes
-% available to show the else clause.  The environment takes one argument
-% that is the condition for the if statement.  For an example of its
-% usage, see the above example.
-%
-% \DescribeEnv{FOR}
-% Use the \textsf{FOR} environment to format a for loop and takes one
-% argument.  There are two kinds of for loops supported by this macro.
-% The first type of for loop is generally know as the \emph{for-each}
-% loop.  This type of loop is used to iterate over the values of some
-% set.  The syntax for the argument to the environment is 
-% ``|\EACH <var> \IN <set>|''.  The other type of loop supported is used
-% to assign a variable to a range of values.  The syntax for the argument
-% in this case is ``|<var> \= <beginning> \TO <end>|''.  Here is an
-% example usage.
-% \[
-% \parbox{2.0in}{\hbadness2000
-% \begin{algorithm}
-%   {Greedy-Activity-Selector}{s,f}
-%   n \= length[s] \\
-%   A \= {1} \\
-%   j \= 1 \\
-%   \begin{FOR}{i \= 2 \TO n}
-%     \begin{IF}{s_i \geq f_j}
-%       A \= A \cup {i} \\
-%       j \= i
-%     \end{IF}
-%   \end{FOR} \\
-%   \RETURN A
-% \end{algorithm}}
-% \hspace{10pt}
-% \vcenter{\hsize=2.4in
-%   \begin{verbatim}
-% \begin{algorithm}
-%   {Greedy-Activity-Selector}{s,f}
-%   n \= length[s] \\
-%   A \= {1} \\
-%   j \= 1 \\
-%   \begin{FOR}{i \= 2 \TO n}
-%     \begin{IF}{s_i \geq f_j}
-%       A \= A \cup {i} \\
-%       j \= i 
-%     \end{IF}
-%   \end{FOR} \\
-%   \RETURN A
-% \end{algorithm}
-% \end{verbatim}
-% }\]
-%
-% \DescribeEnv{WHILE}
-% Uset the \textsf{WHILE} environment to format a while loop.  The
-% environment takes one argument.  The argument is the exit condition
-% for the loop.  The loop will iterate until the condition is false.
-% Here is an example usage.
-% \[
-% \parbox{2.0in}{\hbadness2000
-% \begin{algorithm}{Tree-Successor}{x}
-%   \begin{IF}{right[x] \neq \NIL}
-%     \RETURN 
-%       \CALL{Tree-Min}(right[x])
-%   \end{IF} \\
-%   y \= p[x] \\
-%   \begin{WHILE}
-%      {y \neq \NIL \text{and} x=right[y]}
-%     x \= y \\
-%     y \= p[y]
-%   \end{WHILE} \\
-%   \RETURN y
-% \end{algorithm}}
-% \hspace{10pt}
-% \vcenter{\hsize=2.6in
-%   \begin{verbatim}
-% \begin{algorithm}{Tree-Successor}{x}
-%   \begin{IF}{right[x] \neq \NIL}
-%     \RETURN 
-%        \CALL{Tree-Min}(right[x])
-%   \end{IF} \\
-%   y \= p[x] \\
-%   \begin{WHILE}
-%      {y \neq \NIL \text{and} x=right[y]}
-%     x \= y \\
-%     y \= p[y]
-%   \end{WHILE} \\
-%   \RETURN y
-% \end{algorithm}
-% \end{verbatim}
-% }\]
-%
-% \DescribeEnv{REPEAT}
-% Use the \textsf{REPEAT} environment to format a repeat-until loop.
-% The environment takes no arguments.  The condition for the loop should
-% be given after the |\end{REPEAT}| line.  Here is an example usage.
-%
-% \[
-% \parbox{2.0in}{\hbadness2000
-% \begin{algorithm}{Hash-Search}{T,k}
-%   i \= 0 \\
-%   \begin{REPEAT}
-%     j \= h(k,i) \\
-%     \begin{IF}{T[j] = k}
-%       \RETURN j
-%     \end{IF} \\
-%     i \= i+1
-%   \end{REPEAT} T[j]=\NIL\text{or} i=m \\
-%   \RETURN \NIL
-% \end{algorithm}}
-% \hspace{10pt}
-% \vcenter{\hsize=2.4in
-% \begin{verbatim}
-% \begin{algorithm}{Hash-Search}{T,k}
-%   i \= 0 \\
-%   \begin{REPEAT}
-%     j \= h(k,i) \\
-%     \begin{IF}{T[j] = k}
-%       \RETURN j
-%     \end{IF} \\
-%     i \= i+1
-%   \end{REPEAT} T[j]=\NIL\text{or} i=m \\
-%   \RETURN \NIL
-% \end{algorithm}
-% \end{verbatim}
-% }\]
-%
-% \DescribeEnv{SWITCH}
-% Use the \textsf{SWICH} environment to format a very general switch
-% statement.  The environment is like an itemize environment.  Use the
-% command |\item{<condition>}| to create a new case label.  The
-% conditions can be anything, and don't all have to test the same
-% variable.  This is the most general switch statement.  The formatting
-% conventions show that the first case condition to match will be
-% executed.  The text |\DEFAULT| may be used for the condition to
-% provide a default action.  Here is an example usage.
-%
-% \[
-% \parbox{2.0in}{\hbadness2000
-% \begin{algorithm}{Select}{x, i}
-%   r \= size[left[x]] + 1 \\
-%   \begin{SWITCH}
-%   \item{i = r} \\
-%     \RETURN x
-%   \item{i < r} \\
-%     \RETURN 
-%     \CALL{Select}(left[x], i)
-%   \item{\DEFAULT} \\
-%     \RETURN 
-%     \CALL{Select}(right[x], i - r)
-%   \end{SWITCH}
-% \end{algorithm}}
-% \hspace{10pt}
-% \vcenter{\hsize=2.4in
-% \begin{verbatim}
-% \begin{algorithm}{Select}(x, i)
-%   r \= size[left[x]] + 1 \\
-%   \begin{SWITCH}
-%   \item{i = r} \\
-%     \RETURN x
-%   \item{i < r} \\
-%     \RETURN 
-%     \CALL{Select}(left[x], i)
-%   \item{\DEFAULT} \\
-%     \RETURN 
-%     \CALL{Select}(right[x], i - r)
-%   \end{SWITCH}
-% \end{algorithm}
-% \end{verbatim}
-% }\]
-%
-% \subsection{Macros}
-%
-% \DescribeMacro{CALL}
-% Use the \textsf{CALL} macro to format a function call.  The macro
-% takes one argument.  The argument is the name of the function
-% to call. It is usually followed by the parametes to the function call.
-% For example, ``|\CALL{Sort-Array}(array, length)|''.
-%
-% \DescribeMacro{ERROR}
-% Use the \textsf{CALL} macro to signal that some sort of error has
-% occured.  The macro takes one argument that the reason for the error.
-% The text will be formatted in text mode (not math mode) and will be
-% surrounded by quotation marks.
-%
-% \DescribeMacro{algkey}
-% Use the \textsf{algkey} to format key words.  If this package does not
-% define a keyword that you want to use, then this macro is used to
-% format your keyword like the other keywords.
-%
-% \subsection{Additional keywords and symbols}
-%
-% \DescribeMacro{RETURN}
-% Use the \textsf{RETURN} macro to print out the return keyword.
-% Usually this macro is followed by information that is to be returned
-% from the algorithm but this is not an argument to the macro.
-%
-% \DescribeMacro{NIL}
-% Use the \textsf{NIL} macro to print the nil keyword.  This keywod is
-% used to represent a variable that has no value assinged.
-% \DescribeMacro{\=}
-% Use the text |\=| to signal assinment.  This command produces this
-% symbol in the formatted text, ``$\leftarrow$''.
-%
-% \section{Future Work}
-%
-% The current implementation of the \textsf{algorithm} environment is
-% sensitive to the proper placement of |\\| in the text.  See the
-% examples for this.  The environments should work without being so
-% fussy on this point.  (Sometime you need a |\\| at the end of and
-% environment, sometimes you don't).
-% 
-% I would like the syntax of the repeat loop to be the same as the while
-% loop.  I was having some trouble getting the stack commands to work,
-% so that I could save of the argument.  This environment is not very
-% consistent with the rest of the algorithm environments.
-%
-% There is probably a better way to do the formatting then using the
-% array environment.  Currently \LaTeX{} is formatting the algorithms by
-% using the \textsf{array} environment.  This is pretty silly, because
-% this is not really an array.
-%
-% You cannot center the algorithm environment.  This is probably becase
-% it is being implemented as an array.  The current workaround for this
-% problem is to include the algorithm in a |\begin{minipage}{1pt}|
-% ... |\end{minipage}|.  Seems to work in every case that I have come
-% accross.
-%
-% There is probably a better way to make a mode that is like math mode
-% that does not insert |$| characters everywhere.
-%
-% I am not very experienced in writing modes for \LaTeX{}, so if you
-% have any suggestions for improvements or know how to solve any of the
-% above listed problems, please send me email.  The address is on the
-% front page of this document.
-
-
-\newbox\algstack 
-\newbox\algtab 
-\newcount\algline 
-\newtoks\alga
-\newtoks\algb
-
-
-\newif\ifalgisenv
-
-\def\alglpsh#1\to#2{\alga={#1\\}\algb=\expandafter{#2}
-  \global\edef#2{\the\alga\the\algb}}
-\def\alglpop#1\to#2{\ifx\empty#1\def#2{}
-  \else\global\expandafter\algllop#1\algllop#1#2\fi}
-\def\algllop#1\\#2\algllop#3#4{\def#3{#2}\def#4{#1}}
-\def\algltop#1\to#2{\ifx\empty#1\def\#2{}\else
-  \expandafter\alglttop#1\alglttop#2\fi}
-\def\alglttop#1\\#2\alglttop#3{\def#3{#1}}
-\def\algckenv#1{\algltop\alglenv\to\algenv
-  \def\algarg{#1}
-  \ifx \algarg\algenv \algisenvtrue \else \algisenvfalse \fi}
-
-\def\algsol{\global\advance\algline by 1
-  \the\algline&\hbox\bgroup\copy\algtab$\ignorespaces}
-\def\algeol{$\egroup\cr\algsol}
-\def\algpush{\global\setbox\algstack\hbox{\unhbox\algstack\box\algtab}}
-\def\algpop{\global\setbox\algstack\hbox{\unhbox\algstack
-    \global\setbox\algtab\lastbox}}
-\def\algset{$\egroup\setbox0=\lastbox\algpush
-  \global\setbox\algtab\hbox to \wd0{}\hbox\bgroup\unhbox0$}
-\def\algorithm#1#2{\bgroup
-  \let\\=\algeol
-  \let\==\leftarrow
-  \let\IF=\algIF
-  \let\RETURN=\algRETURN
-  \let\ELSE=\algELSE
-  \let\endIF=\endalgIF
-  \let\ERROR=\algERROR
-  \let\NIL=\algNIL
-  \let\WHILE=\algWHILE
-  \let\endWHILE=\endalgWHILE
-  \let\FOR=\algFOR
-  \let\endFOR=\endalgFOR
-  \let\CALL=\algCALL
-  \let\text=\algtext
-  \let\TO=\algTO
-  \let\EACH=\algEACH
-  \let\SWITCH=\algSWITCH
-  \let\item=\algitem
-  \let\endSWITCH=\endalgSWITCH
-  \let\DEFAULT=\algDEFAULT
-  \let\REPEAT=\algREPEAT
-  \let\UNTIL=\endalgREPEAT
-  \let\endREPEAT=\UNTIL
-  \let\IN=\algIN
-  \let\begin=\algbegin
-  \let\end=\algend
-  \let\endalgorithm=\algalmostend
-  \global\setbox\algtab\null
-  \global\setbox\algstack\null
-  \global\algline=0
-  \def\alglenv{algorithm\\}
-  \halign\bgroup\space\hfill##&\quad##\hss \cr
-  \omit\CALL{#1}$(#2)$\span\omit\hfill \cr
-  \algsol}
-\def\algalmostend{$\egroup\cr\egroup\egroup\strut\end{algorithm}}
-%\def\endalgorithm{$\egroup\cr\egroup\egroup\strut}
-\def\algkey#1{\mbox{\bf #1\ }}
-\def\algIF#1{\algkey{if}\algset#1 \\
-  \algkey{then}\algset}
-\def\algELSE{\algckenv{IF}
-  \ifalgisenv
-    \algpop \\
-    {\setbox0\hbox{\algkey{then}}
-      \hbox to \wd0{\algkey{else}\hfill}}
-    \algset
-  \else
-    \PackageError{newalg}
-    {\string\ELSE\space is only allowed in the IF environment}
-    {You have an \protect\ELSE\space command without a \string\begin{IF}}
-  \fi}
-\def\endalgIF{\algpop\algpop}
-\def\algERROR#1{\algkey{error}\mbox{``#1''}}
-\def\algRETURN{\algkey{return}}
-\def\algconst#1{\mbox{\sc #1}}
-\def\algNIL{\algconst{nil}}
-\def\algWHILE#1{\algkey{while}#1 \\
-  \indent\algkey{do}\algset}
-\def\endalgWHILE{\algpop}
-\def\algCALL#1{\mbox{\sc #1}}
-\def\algFOR#1{\algkey{for}#1 \\
-  \indent\algkey{do}\algset}
-\def\endalgFOR{\algpop}
-\def\algtext#1{\mbox{ #1 }}
-\def\algTO{\algkey{ to}}
-\def\algEACH{\algkey{ each}}
-\def\algSWITCH{\algkey{switch}\algpush}
-\def\algitem#1{\algckenv{SWITCH}
-  \ifalgisenv
-    \algpop \\
-    \quad\algkey{case}\algset #1:
-  \else
-    \PackageError{newalg}
-    {\string\item\space can only be used in a SWITCH environment}
-    {You have an item that is not inside of the correct environment}
-  \fi}
-\def\endalgSWITCH{\algpop}
-\def\algDEFAULT{\algkey{default}}
-\def\algREPEAT#1{
-  \algkey{repeat}\algset\\}
-\def\endalgREPEAT{\algpop \\
-  \quad\algkey{until}}
-\def\algIN{\algkey{ in}}
-\def\algbegin#1{\alglpsh#1\to\alglenv
-  \csname #1\endcsname}
-\def\algend#1{\alglpop\alglenv\to\algenv
-  \def\algarg{#1}
-  \ifx \algarg\algenv
-    \relax
-  \else
-    \PackageError{newalg}
-    {\string\begin{\algenv}\space ended by \string\end{\algarg}}
-    {We are confused.  Try to return now}
-  \fi
-  \csname end#1\endcsname
-}
-
diff --git a/Master/texmf-dist/source/latex/newalg/newalg.ins b/Master/texmf-dist/source/latex/newalg/newalg.ins
deleted file mode 100644
index 21f08c71a9e..00000000000
--- a/Master/texmf-dist/source/latex/newalg/newalg.ins
+++ /dev/null
@@ -1,6 +0,0 @@
-\def\batchfile{newalg.ins}
-\input docstrip.tex
-
-\keepsilent
-
-\generateFile{newalg.sty}{f}{\from{newalg.dtx}{package}}
diff --git a/Master/texmf-dist/tex/latex/newalg/newalg.sty b/Master/texmf-dist/tex/latex/newalg/newalg.sty
deleted file mode 100644
index 40f100e712a..00000000000
--- a/Master/texmf-dist/tex/latex/newalg/newalg.sty
+++ /dev/null
@@ -1,148 +0,0 @@
-%% 
-%% This is file `newalg.sty',
-%% generated with the docstrip utility.
-%% 
-%% The original source files were:
-%% 
-%% newalg.dtx  (with options: `package')
-%% 
-%% IMPORTANT NOTICE:
-%% 
-%% For the copyright see the source file.
-%% 
-%% You are *not* allowed to modify this file.
-%% 
-%% You are *not* allowed to distribute this file.
-%% For distribution of the original source see
-%% the terms for copying and modification in the file  newalg.dtx.
-%% 
-\NeedsTeXFormat{LaTeX2e}[1994/06/01]
-\ProvidesPackage{newalg}[1994/12/15 Format code algorithms nicely]
-
-\newbox\algstack
-\newbox\algtab
-\newcount\algline
-\newtoks\alga
-\newtoks\algb
-
-\newif\ifalgisenv
-
-\def\alglpsh#1\to#2{\alga={#1\\}\algb=\expandafter{#2}
-  \global\edef#2{\the\alga\the\algb}}
-\def\alglpop#1\to#2{\ifx\empty#1\def#2{}
-  \else\global\expandafter\algllop#1\algllop#1#2\fi}
-\def\algllop#1\\#2\algllop#3#4{\def#3{#2}\def#4{#1}}
-\def\algltop#1\to#2{\ifx\empty#1\def\#2{}\else
-  \expandafter\alglttop#1\alglttop#2\fi}
-\def\alglttop#1\\#2\alglttop#3{\def#3{#1}}
-\def\algckenv#1{\algltop\alglenv\to\algenv
-  \def\algarg{#1}
-  \ifx \algarg\algenv \algisenvtrue \else \algisenvfalse \fi}
-
-\def\algsol{\global\advance\algline by 1
-  \the\algline&\hbox\bgroup\copy\algtab$\ignorespaces}
-\def\algeol{$\egroup\cr\algsol}
-\def\algpush{\global\setbox\algstack\hbox{\unhbox\algstack\box\algtab}}
-\def\algpop{\global\setbox\algstack\hbox{\unhbox\algstack
-    \global\setbox\algtab\lastbox}}
-\def\algset{$\egroup\setbox0=\lastbox\algpush
-  \global\setbox\algtab\hbox to \wd0{}\hbox\bgroup\unhbox0$}
-\def\algorithm#1#2{\bgroup
-  \let\\=\algeol
-  \let\==\leftarrow
-  \let\IF=\algIF
-  \let\RETURN=\algRETURN
-  \let\ELSE=\algELSE
-  \let\endIF=\endalgIF
-  \let\ERROR=\algERROR
-  \let\NIL=\algNIL
-  \let\WHILE=\algWHILE
-  \let\endWHILE=\endalgWHILE
-  \let\FOR=\algFOR
-  \let\endFOR=\endalgFOR
-  \let\CALL=\algCALL
-  \let\text=\algtext
-  \let\TO=\algTO
-  \let\EACH=\algEACH
-  \let\SWITCH=\algSWITCH
-  \let\item=\algitem
-  \let\endSWITCH=\endalgSWITCH
-  \let\DEFAULT=\algDEFAULT
-  \let\REPEAT=\algREPEAT
-  \let\UNTIL=\endalgREPEAT
-  \let\endREPEAT=\UNTIL
-  \let\IN=\algIN
-  \let\begin=\algbegin
-  \let\end=\algend
-  \let\endalgorithm=\algalmostend
-  \global\setbox\algtab\null
-  \global\setbox\algstack\null
-  \global\algline=0
-  \def\alglenv{algorithm\\}
-  \halign\bgroup\space\hfill##&\quad##\hss \cr
-  \omit\CALL{#1}$(#2)$\span\omit\hfill \cr
-  \algsol}
-\def\algalmostend{$\egroup\cr\egroup\egroup\strut\end{algorithm}}
-\def\algkey#1{\mbox{\bf #1\ }}
-\def\algIF#1{\algkey{if}\algset#1 \\
-  \algkey{then}\algset}
-\def\algELSE{\algckenv{IF}
-  \ifalgisenv
-    \algpop \\
-    {\setbox0\hbox{\algkey{then}}
-      \hbox to \wd0{\algkey{else}\hfill}}
-    \algset
-  \else
-    \PackageError{newalg}
-    {\string\ELSE\space is only allowed in the IF environment}
-    {You have an \protect\ELSE\space command without a \string\begin{IF}}
-  \fi}
-\def\endalgIF{\algpop\algpop}
-\def\algERROR#1{\algkey{error}\mbox{``#1''}}
-\def\algRETURN{\algkey{return}}
-\def\algconst#1{\mbox{\sc #1}}
-\def\algNIL{\algconst{nil}}
-\def\algWHILE#1{\algkey{while}#1 \\
-  \indent\algkey{do}\algset}
-\def\endalgWHILE{\algpop}
-\def\algCALL#1{\mbox{\sc #1}}
-\def\algFOR#1{\algkey{for}#1 \\
-  \indent\algkey{do}\algset}
-\def\endalgFOR{\algpop}
-\def\algtext#1{\mbox{ #1 }}
-\def\algTO{\algkey{ to}}
-\def\algEACH{\algkey{ each}}
-\def\algSWITCH{\algkey{switch}\algpush}
-\def\algitem#1{\algckenv{SWITCH}
-  \ifalgisenv
-    \algpop \\
-    \quad\algkey{case}\algset #1:
-  \else
-    \PackageError{newalg}
-    {\string\item\space can only be used in a SWITCH environment}
-    {You have an item that is not inside of the correct environment}
-  \fi}
-\def\endalgSWITCH{\algpop}
-\def\algDEFAULT{\algkey{default}}
-\def\algREPEAT#1{
-  \algkey{repeat}\algset\\}
-\def\endalgREPEAT{\algpop \\
-  \quad\algkey{until}}
-\def\algIN{\algkey{ in}}
-\def\algbegin#1{\alglpsh#1\to\alglenv
-  \csname #1\endcsname}
-\def\algend#1{\alglpop\alglenv\to\algenv
-  \def\algarg{#1}
-  \ifx \algarg\algenv
-    \relax
-  \else
-    \PackageError{newalg}
-    {\string\begin{\algenv}\space ended by \string\end{\algarg}}
-    {We are confused.  Try to return now}
-  \fi
-  \csname end#1\endcsname
-}
-
-\endinput
-%% 
-%% End of file `newalg.sty'.
diff --git a/Master/tlpkg/bin/ctan2tds b/Master/tlpkg/bin/ctan2tds
index 7d4ef4c2b5e..c120e2e5110 100755
--- a/Master/tlpkg/bin/ctan2tds
+++ b/Master/tlpkg/bin/ctan2tds
@@ -290,6 +290,7 @@ chdir $startdir || die "chdir($startdir) failed: $!";  # back to raw
  'mxedruli',	"&MAKEflatten",
  'nbaskerv',	"die 'skipping, requires nonfree font'",
  'ncctools',	"&MAKEflatten",
+ 'newalg',	"die 'skipping, nonfree license'",
  'newsletr',    "&MAKEnewsletr",
  'newthm',	"die 'skipping, obsolete, no longer on ctan'",
  'niceframe',	"die 'skipping, nosell license'",
@@ -716,6 +717,7 @@ $standardfmt='latex';
  'archaic',	'fonts',
  'arev',	'fonts',
  'arrayjob',	'generic',
+ 'astro',	'fonts',
  'aurical',	'fonts',
  'automata',	'metapost',
  'ascii',	'fonts',
diff --git a/Master/tlpkg/tlpsrc/collection-science.tlpsrc b/Master/tlpkg/tlpsrc/collection-science.tlpsrc
index 250c0219fbc..ca511efd335 100644
--- a/Master/tlpkg/tlpsrc/collection-science.tlpsrc
+++ b/Master/tlpkg/tlpsrc/collection-science.tlpsrc
@@ -35,7 +35,6 @@ depend karnaugh
 depend mhchem
 depend mhs
 depend miller
-depend newalg
 depend objectz
 depend pseudocode
 depend scientificpaper
diff --git a/Master/tlpkg/tlpsrc/newalg.tlpsrc b/Master/tlpkg/tlpsrc/newalg.tlpsrc
deleted file mode 100644
index a349c567c93..00000000000
--- a/Master/tlpkg/tlpsrc/newalg.tlpsrc
+++ /dev/null
@@ -1,2 +0,0 @@
-name newalg
-category Package