unify format of pod

git-svn-id: svn://tug.org/texlive/trunk@47276 c570f23f-e606-0410-a88d-b1316a301751

1 files changed, 106 insertions, 28 deletions

diff --git a/Master/texmf-dist/scripts/texlive/tlmgr.pl b/Master/texmf-dist/scripts/texlive/tlmgr.pl
index a634995c72b..cfc84414db2 100755
--- a/Master/texmf-dist/scripts/texlive/tlmgr.pl
+++ b/Master/texmf-dist/scripts/texlive/tlmgr.pl
@@ -7571,7 +7571,13 @@ Gives version information (same as C<--version>).
 
 If C<-v> has been given the revisions of the used modules are reported, too.
 
-=head2 backup [--clean[=I<N>]] [--backupdir I<dir>] [--all | I<pkg>]...
+=head2 backup
+
+=over 4
+
+=item B<backup [I<option>...] --all>
+
+=item B<backup [I<option>...] I<pkg>...>
 
 If the C<--clean> option is not specified, this action makes a backup of
 the given packages, or all packages given C<--all>. These backups are
@@ -7617,18 +7623,14 @@ performed are written to the terminal.
 
 =back
 
-=head2 candidates I<pkg>
-
-=over 4
+=back
 
-=item B<candidates I<pkg>>
+=head2 candidates I<pkg>
 
 Shows the available candidate repositories for package I<pkg>.
 See L<MULTIPLE REPOSITORIES> below.
 
-=back
-
-=head2 check [I<option>]... [files|depends|executes|runfiles|all]
+=head2 check [I<option>...] [files|depends|executes|runfiles|all]
 
 Executes one (or all) check(s) on the consistency of the installation.
 
@@ -7671,9 +7673,13 @@ checking the TL development repository.
 
 =back
 
-=head2 conf [texmf|tlmgr|updmap [--conffile I<file>] [--delete] [I<key> [I<value>]]]
+=head2 conf
+
+=over 4
+
+=item  B<conf [texmf|tlmgr|updmap [--conffile I<file>] [--delete] [I<key> [I<value>]]]>
 
-=head2 conf auxtrees [--conffile I<file>] [show|add|delete] [I<value>]
+=item B<conf auxtrees [--conffile I<file>] [show|add|delete] [I<value>]>
 
 With only C<conf>, show general configuration information for TeX Live,
 including active configuration files, path settings, and more.  This is
@@ -7722,7 +7728,9 @@ but tinkering with settings in this way is strongly discouraged.  Again,
 no error checking on either keys or values is done, so any sort of
 breakage is possible.
 
-=head2 dump-tlpdb [--local|--remote] [--json]
+=back
+
+=head2 dump-tlpdb [I<option>...] [--json]
 
 Dump complete local or remote TLPDB to standard output, as-is.  The
 output is analogous to the C<--machine-readable> output; see
@@ -7760,17 +7768,17 @@ I<location> is the file or url to the repository.
 
 Line endings may be either LF or CRLF depending on the current platform.
 
-=head2 generate [I<option>]... I<what>
+=head2 generate
 
 =over 4
 
-=item B<generate language>
+=item B<generate [I<option>...] language>
 
-=item B<generate language.dat>
+=item B<generate [I<option>...] language.dat>
 
-=item B<generate language.def>
+=item B<generate [I<option>...] language.def>
 
-=item B<generate language.dat.lua>
+=item B<generate [I<option>...] language.dat.lua>
 
 =back
 
@@ -7877,7 +7885,15 @@ The respective locations are as follows:
 
 Start the graphical user interface. See B<GUI> below.
 
-=head2 info [I<option>...] [collections|schemes|I<pkg>...]
+=head2 info
+
+=over 4
+
+=item B<info [I<option>...] I<pkg>...>
+
+=item B<info [I<option>...] collections>
+
+=item B<info [I<option>...] schemes>
 
 With no argument, lists all packages available at the package
 repository, prefixing those already installed with C<i>.
@@ -7946,13 +7962,15 @@ If both C<--json> and C<--data> are given, C<--json> takes precedence.
 
 =back
 
+=back
+
 =head2 init-usertree
 
 Sets up a texmf tree for so-called user mode management, either the
 default user tree (C<TEXMFHOME>), or one specified on the command line
 with C<--usertree>.  See L<USER MODE> below.
 
-=head2 install [I<option>]... I<pkg>...
+=head2 install [I<option>...] I<pkg>...
 
 Install each I<pkg> given on the command line, if it is not already
 installed.  (It does not touch existing packages; see the C<update>
@@ -8018,7 +8036,15 @@ C<--reinstall>, as in (using the C<fontspec> package as the example):
 
 =back
 
-=head2 key list|add I<file>|remove I<keyid>
+=head2 key
+
+=over 4
+
+=item B<key list>
+
+=item B<key add I<file>>
+
+=item B<key remove I<keyid>>
 
 The action C<key> allows listing, adding and removing additional GPG
 keys to the set of trusted keys, that is, those that are used to verify
@@ -8034,6 +8060,8 @@ C<tlpkg/gpg/repository-keys.gpg>.
 The C<remove> argument requires a key id and removes the requested id
 from the local keyring.
 
+=back
+
 =head2 list
 
 Synonym for L<info|/info [I<option>...] [collections|schemes|I<pkg>...]>.
@@ -8182,7 +8210,13 @@ C<texconfig> script, which supports other configuration settings for
 some programs, notably C<dvips>.  C<tlmgr> does not support those extra
 settings.
 
-=head2 path [--w32mode=user|admin] [add|remove]
+=head2 path
+
+=over 4
+
+=item B<path [--w32mode=user|admin] add>
+
+=item B<path [--w32mode=user|admin] remove>
 
 On Unix, merely adds or removes symlinks for binaries, man pages, and
 info pages in the system directories specified by the respective options
@@ -8209,6 +8243,8 @@ is given, it must be C<user> and the user path will be adjusted. If a
 user without admin rights uses the option C<--w32mode admin> a warning
 is issued that the caller does not have enough privileges.
 
+=back
+
 =head2 pinning 
 
 The C<pinning> action manages the pinning file, see L</Pinning> below.
@@ -8235,11 +8271,15 @@ Remove all pinning data for repository I<repo>.
 
 =back
 
-=head2 platform list|add|remove I<platform>...
+=head2 platform
+
+=over 4
 
-=head2 platform set I<platform>
+=item B<platform list|add|remove I<platform>...>
 
-=head2 platform set auto
+=item B<platform set I<platform>>
+
+=item B<platform set auto>
 
 C<platform list> lists the TeX Live names of all the platforms
 (a.k.a. architectures), (C<i386-linux>, ...) available at the package
@@ -8273,6 +8313,8 @@ written to the terminal.
 
 =back
 
+=back
+
 =cut
 
 # keep the following on *ONE* line otherwise Losedows perldoc does
@@ -8280,24 +8322,46 @@ written to the terminal.
 
 =pod
 
-=head2 postaction [--w32mode=user|admin] [--fileassocmode=1|2] [--all] [install|remove] [shortcut|fileassoc|script] [I<pkg>]...
+=head2 postaction
+
+=over 4
+
+=item B<postaction [I<option>...] install [shortcut|fileassoc|script] [I<pkg>...]>
+
+=item B<postaction [I<option>...] remove [shortcut|fileassoc|script] [I<pkg>...]>
 
 Carry out the postaction C<shortcut>, C<fileassoc>, or C<script> given
 as the second required argument in install or remove mode (which is the
 first required argument), for either the packages given on the command
 line, or for all if C<--all> is given.
 
+Options:
+
+=over 4
+
+=item B<--w32mode=[user|admin]>
+
 If the option C<--w32mode> is given the value C<user>, all actions will
 only be carried out in the user-accessible parts of the
 registry/filesystem, while the value C<admin> selects the system-wide
 parts of the registry for the file associations.  If you do not have
 enough permissions, using C<--w32mode=admin> will not succeed.
 
+=item B<--fileassocmode=[1|2]>
+
 C<--fileassocmode> specifies the action for file associations.  If it is
 set to 1 (the default), only new associations are added; if it is set to
 2, all associations are set to the TeX Live programs.  (See also
 C<option fileassocs>.)
 
+=item B<--all>
+
+Carry out the postactions for all packages
+
+=back
+
+=back
+
 =head2 print-platform
 
 Print the TeX Live identifier for the detected platform
@@ -8397,7 +8461,13 @@ otherwise, all operations will fail!
 
 =back
 
-=head2 restore [--json] [--backupdir I<dir>] [--all | I<pkg> [I<rev>]]
+=head2 restore
+
+=over 4
+
+=item B<restore [I<option>...] I<pkg> [I<rev>]>
+
+=item B<restore [I<option>...] --all>
 
 Restore a package from a previously-made backup.
 
@@ -8447,11 +8517,17 @@ If both C<--json> and C<--data> are given, C<--json> takes precedence.
 
 =back
 
-=head2 search [I<option>...] I<what>
+=back
+
+=head2 search
+
+=over 4
+
+=item B<search [I<option>...] I<what>>
 
-=head3 search [I<option>...] --file I<what>
+=item B<search [I<option>...] --file I<what>>
 
-=head3 search [I<option>...] --all I<what>
+=item B<search [I<option>...] --all I<what>>
 
 By default, search the names, short descriptions, and long descriptions
 of all locally installed packages for the argument I<what>, interpreted
@@ -8483,6 +8559,8 @@ C<tables> (unless they also contain the word C<table> on its own).
 
 =back
 
+=back
+
 =head2 shell
 
 Starts an interactive mode, where tlmgr prompts for commands. This can