pdfcprot

git-svn-id: svn://tug.org/texlive/trunk@1180 c570f23f-e606-0410-a88d-b1316a301751

6 files changed, 1445 insertions, 0 deletions

diff --git a/Master/texmf-dist/tex/latex/pdfcprot/pdfcprot.sty b/Master/texmf-dist/tex/latex/pdfcprot/pdfcprot.sty
new file mode 100644
index 00000000000..725a02b6df4
--- /dev/null
+++ b/Master/texmf-dist/tex/latex/pdfcprot/pdfcprot.sty
@@ -0,0 +1,900 @@
+%%
+%% This is file `pdfcprot.sty',
+%% generated with the docstrip utility.
+%%
+%% The original source files were:
+%%
+%% pdfcprot.dtx  (with options: `package')
+%% 
+%% Copyright (C) 2001 Carsten Schurig.
+%% Copyright (C) 2004 Tobias Schlemmer.
+%% Email: keinstein_junior@gmx.net
+%% 
+%% This program may be distributed and/or modified under the
+%% conditions of the LaTeX Project Public License, either version 1.2
+%% of this license or (at your option) any later version.
+%% The latest version of this license is in
+%% http://www.latex-project.org/lppl.txt
+%% and version 1.2 or later is part of all distributions of LaTeX
+%% version 1999/12/01 or later.
+%% 
+%% For a list of files constituting this program see README.txt. For
+%% further copyright information see README.txt and LEGAL.txt.
+%% 
+%% ----------------------------------------------------
+%% This file is part of the LaTeX2e pdfcprot bundle.
+%% ----------------------------------------------------
+%% Some parts of the code are based on code by the
+%% authors of pdftex.
+%% ----------------------------------------------------
+%% 
+%%  This system is distributed in the hope that it will be useful,
+%%  but WITHOUT ANY WARRANTY; without even the implied warranty of
+%%  MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.
+%% 
+%% 
+%% IMPORTANT NOTICE:
+%% 
+%% For error reports in case of UNCHANGED versions see documentation.
+%% 
+%% Please do not request updates directly. Distribution is
+%% done through Mail-Servers, Mailboxes and TeX organizations.
+%% 
+%% You are not allowed to change this file.
+%% 
+%% You are allowed to distribute this file under the condition that
+%% it is distributed together with all files mentioned in README.txt.
+%% See LEGAL.txt for further information.
+%% 
+%% If you receive only some of these files from someone, complain!
+%% 
+%% You are NOT ALLOWED to distribute this file alone.
+
+
+
+
+\NeedsTeXFormat{LaTeX2e}[1994/12/01]
+\ProvidesPackage{pdfcprot}[2002/02/27 v1.5 character protruding using
+pdflatex (cs)]
+\RequirePackage{ifthen}
+\RequirePackage{keyval}
+\newcounter{CPROT@family}
+\newcounter{CPROT@family@temp}
+\newcounter{CPROT@series}
+\newcounter{CPROT@series@temp}
+\newcounter{CPROT@shape}
+\newcounter{CPROT@shape@temp}
+\newcounter{CPROT@size}
+\newcounter{CPROT@size@temp}
+\newboolean{CPROT@textcomp}
+\newboolean{CPROT@quiet}
+\setboolean{CPROT@quiet}{true}
+\newcounter{CPROT@temp@chars}
+\newcommand*{\CPROT@lowlevel@encoding}{}
+\newcommand*{\CPROT@lowlevel@family}{}
+\newcommand*{\CPROT@lowlevel@series}{}
+\newcommand*{\CPROT@lowlevel@shape}{}
+\newcommand*{\CPROT@resetall}{%
+  \setcounter{CPROT@family}{0}%
+  \setcounter{CPROT@series}{0}%
+  \setcounter{CPROT@shape}{0}%
+  \setcounter{CPROT@size}{0}%
+  \setboolean{CPROT@textcomp}{false}%
+  \edef\CPROT@lowlevel@encoding{}%
+}
+\newcommand*{\CPROT@setprotcodes@}{}
+\newcommand*{\CPROT@setprotcodes@add}{%
+  \setcounter{CPROT@family@temp}{\value{CPROT@family}}%
+  \CPROT@aac@encoding%
+}
+\newcommand*{\CPROT@setprotcodes@temp}{}
+\newcommand{\CPROT@packageinfo}[1]{%
+  \PackageInfo{pdfcprot}{#1}%
+  }
+\newcommand{\CPROT@packagewarning}[1]{%
+  \PackageWarning{pdfcprot}{#1}%
+  }
+\newcommand{\CPROT@packageerror}[1]{%
+  \PackageError{pdfcprot}{#1}%
+  }
+\newcommand{\CPROT@packageinfo@or@warning}[1]{%
+  \ifthenelse{\boolean{CPROT@quiet}}{%
+    \CPROT@packageinfo{#1}%
+    }{%
+    \CPROT@packagewarning{#1}%
+    }%
+  }%
+\define@key{CPROT}{encoding}{%
+  \ifthenelse{\equal{#1}{encodingdefault}}{%
+    \edef\CPROT@lowlevel@encoding{\encodingdefault}% \encodingdefault will be set.
+  }{% I assume a low level encodingname is given
+    \renewcommand*{\CPROT@lowlevel@encoding}{#1}%
+  }%
+}
+\define@key{CPROT}{family}{%
+  \ifthenelse{\equal{#1}{rmfamily}}{%
+    \setcounter{CPROT@family}{2}% \rmfamily will be set
+    }{%
+    \ifthenelse{\equal{#1}{sffamily}}{%
+      \setcounter{CPROT@family}{1}% \sffamily will be set
+      }{% I assume a low level fontname is given
+      \setcounter{CPROT@temp@chars}{0}%
+      \expandafter\@tfor\expandafter\@tempb\expandafter:\expandafter=#1\do{%
+        \stepcounter{CPROT@temp@chars}%
+        }%
+      \ifthenelse{\value{CPROT@temp@chars}>4}{%
+        \CPROT@packageinfo@or@warning{None of the keywords 'all',\MessageBreak
+          'rmfamily' or 'sffamily' was found. I assume you gave a\MessageBreak
+          low level font name but it is at least unusual that a\MessageBreak
+          TeX-fontname has more than 4 characters. I assume you know\MessageBreak
+          what you're doing and continue, but the selection of the\MessageBreak
+          font may fail!%
+          }%
+        \CPROT@packageinfo{It seem's as you want to use a low level\MessageBreak
+          command for font selection. -- You're for yourself.%
+          }%
+        }{}%
+      \setcounter{CPROT@family}{-1}%
+      \renewcommand*{\CPROT@lowlevel@family}{#1}%
+      }%
+    }%
+  }
+\define@key{CPROT}{series}{%
+  \ifthenelse{\equal{#1}{mdseries}}{% medium series
+    \setcounter{CPROT@series}{2}%
+    }{%
+    \ifthenelse{\equal{#1}{bfseries}}{% bold series
+      \setcounter{CPROT@series}{1}%
+      }{% here the low level interface is suspected
+      \setcounter{CPROT@temp@chars}{0}%
+      \expandafter\@tfor\expandafter\@tempb\expandafter:\expandafter=#1\do{%
+        \stepcounter{CPROT@temp@chars}%
+        }%
+      \ifthenelse{\value{CPROT@temp@chars}>4}{%
+        \CPROT@packageinfo@or@warning{None of the keywords 'all',\MessageBreak
+          'mdseries' or 'bfseries' was found. I assume you gave a\MessageBreak
+          low level font name but a series identifier should consist\MessageBreak
+          of 4 characters at maximum. I assume you know what you're\MessageBreak
+          doing and continue, but the selection of the font will\MessageBreak
+          very likely fail!%
+          }%
+        \CPROT@packageinfo{It seem's as you seem want to use a low level\MessageBreak
+          command for font selection. -- You're for yourself.%
+          }%
+        }{}%
+      \setcounter{CPROT@series}{-1}%
+      \renewcommand*{\CPROT@lowlevel@series}{#1}%
+      }%
+    }%
+  }%
+\define@key{CPROT}{shape}{%
+  \ifthenelse{\equal{#1}{upshape}}{%
+    \setcounter{CPROT@shape}{8}%
+    }{%
+    \ifthenelse{\equal{#1}{itshape}}{%
+      \setcounter{CPROT@shape}{4}%
+      }{%
+      \ifthenelse{\equal{#1}{slshape}}{%
+        \setcounter{CPROT@shape}{2}%
+        }{%
+        \ifthenelse{\equal{#1}{scshape}}{%
+          \setcounter{CPROT@shape}{1}%
+          }{% low lewel format
+          \setcounter{CPROT@temp@chars}{0}%
+          \expandafter\@tfor\expandafter\@tempb\expandafter:\expandafter=#1\do{%
+            \stepcounter{CPROT@temp@chars}%
+            }%
+          \ifthenelse{\value{CPROT@temp@chars}>2}{%
+            \CPROT@packageinfo@or@warning{None of the keywords 'all',\MessageBreak
+              'upshape', 'itshape', 'slshape' or 'scshape' was\MessageBreak
+              found. I assume you gave a low level font name but it\MessageBreak
+              is at least unusual that a shape identifier has more\MessageBreak
+              than 2 characters. I assume you know what you're doing\MessageBreak
+              and continue, but the selection of the font will very\MessageBreak
+              likely fail!%
+              }%
+            \CPROT@packageinfo{It seem's as you seem want to use a low level\MessageBreak
+              command for font selection. -- You're for yourself.%
+              }%
+            }{}%
+          \setcounter{CPROT@shape}{-1}%
+          \renewcommand{\CPROT@lowlevel@shape}{#1}%
+          }%
+        }%
+      }%
+    }%
+  }
+\define@key{CPROT}{size}{%
+  \ifthenelse{\equal{#1}{Huge}}{%
+    \setcounter{CPROT@size}{512}%
+    }{%
+    \ifthenelse{\equal{#1}{huge}}{%
+      \setcounter{CPROT@size}{256}%
+      }{%
+      \ifthenelse{\equal{#1}{LARGE}}{%
+        \setcounter{CPROT@size}{128}%
+        }{%
+        \ifthenelse{\equal{#1}{Large}}{%
+          \setcounter{CPROT@size}{64}%
+          }{%
+          \ifthenelse{\equal{#1}{large}}{%
+            \setcounter{CPROT@size}{32}%
+            }{%
+            \ifthenelse{\equal{#1}{normalsize}}{%
+              \setcounter{CPROT@size}{16}%
+              }{%
+              \ifthenelse{\equal{#1}{small}}{%
+                \setcounter{CPROT@size}{8}%
+                }{%
+                \ifthenelse{\equal{#1}{footnotesize}}{%
+                  \setcounter{CPROT@size}{4}%
+                  }{%
+                  \ifthenelse{\equal{#1}{scriptsize}}{%
+                    \setcounter{CPROT@size}{2}%
+                    }{%
+                    \ifthenelse{\equal{#1}{tiny}}{%
+                      \setcounter{CPROT@size}{1}%
+                      }{% low lewel format
+                      \CPROT@packageerror{%
+                        None of the keywords 'all', 'normal' or any LaTeX2e\MessageBreak
+                        font name was found. \MessageBreak
+                        \space For more information how to use\MessageBreak
+                        \string\setupcharprotrudingnumeral see the
+                        pdfcprot manual.%
+                        }%
+                      }{}%
+                    }%
+                  }%
+                }%
+              }%
+            }%
+          }%
+        }%
+      }%
+    }%
+  }
+\define@key{CPROT}{textcomp}{%
+  \ifthenelse{\equal{#1}{true}\or\equal{#1}{on}\or\equal{#1}{1}\or\equal{#1}{yes}}{%
+    \setboolean{CPROT@textcomp}{true}%
+    }{%
+    \ifthenelse{\equal{#1}{false}\or\equal{#1}{off}\or\equal{#1}{0}\or\equal{#1}{no}}{%
+      \setboolean{CPROT@textcomp}{false}%
+      }{%
+      \CPROT@packageerror{%
+        ``#1'' is no setting for ``textcomp''. Use\MessageBreak
+        one of 'true', 'on', 'yes', '1', or 'false', 'off', \MessageBreak
+        'no', '0' instead.\MessageBreak
+        }%
+      }%
+    }%
+  }
+\define@key{CPROTnum}{encoding}{%
+  \ifthenelse{\equal{#1}{0}}{%
+    \renewcommand*{\CPROT@lowlevel@encoding}{}% No encoding will be set.
+  }{%
+    \ifthenelse{\equal{#1}{1}}{%
+      \edef\CPROT@lowlevel@encoding{\encodingdefault}% \encodingdefault will be set.
+    }{%
+      \ifthenelse{\equal{#1}{encodingdefault}}{%
+        \edef\CPROT@lowlevel@encoding{\encodingdefault}% \encodingdefault will be set.
+      }{% I assume a low level encodingname is given
+        \renewcommand*{\CPROT@lowlevel@encoding}{#1}%
+      }%
+    }%
+  }%
+}
+\define@key{CPROTnum}{family}{%
+  \ifthenelse{#1>0 \and #1<4}{%
+    \setcounter{CPROT@family}{#1}%
+    }{%
+    \ifthenelse{#1=0}{%
+      \CPROT@packageinfo{%
+        As you selected '0' (that means 'none') for\MessageBreak
+        selection of the font family, no font will\MessageBreak
+        be set up for char protruding.%
+        }%
+      }{%
+      \CPROT@packageerror{%
+        Your given value '#1' to family in \string\setupcharprotrudingnumeral\MessageBreak
+        is not valid. Sensible values are between 1 and 3 (inclusive).\MessageBreak
+        For further information see the pdfcprot manual.%
+        }%
+      }%
+    }%
+  }
+\define@key{CPROTnum}{series}{%
+  \ifthenelse{#1>0 \and #1<4}{%
+    \setcounter{CPROT@series}{#1}%
+    }{%
+    \ifthenelse{#1=0}{%
+      \CPROT@packageinfo{%
+        As you selected '0' (that means 'none') for\MessageBreak
+        selection of the font series, no font will\MessageBreak
+        be set up for char protruding.%
+        }%
+      }{%
+      \CPROT@packageerror{%
+        Your given value '#1' to series in \string\setupcharprotrudingnumeral\MessageBreak
+        is not valid. Sensible values are between 1 and 15 (inclusive).\MessageBreak
+        For further information see the pdfcprot manual.%
+        }%
+      }%
+    }%
+  }
+\define@key{CPROTnum}{shape}{%
+  \ifthenelse{#1>0 \and #1<16}{%
+    \setcounter{CPROT@shape}{#1}%
+    }{%
+    \ifthenelse{#1=0}{%
+      \CPROT@packageinfo{%
+        As you selected '0' (that means 'none') for\MessageBreak
+        selection of the font shape, no font will\MessageBreak
+        be set up for char protruding.%
+        }%
+      }{%
+      \CPROT@packageerror{%
+        Your given value '#1' to shape in \string\setupcharprotrudingnumeral\MessageBreak
+        is not valid. Sensible values are between 1 and 15 (inclusive).\MessageBreak
+        For further information see the pdfcprot manual.%
+        }%
+      }%
+    }%
+  }
+\define@key{CPROTnum}{size}{%
+  \ifthenelse{#1>0 \and #1<1024}{%
+    \setcounter{CPROT@size}{#1}%
+    }{%
+    \ifthenelse{#1=0}{%
+      \CPROT@packageinfo{%
+        As you selected '0' (that means 'none') for\MessageBreak
+        selection of the font size, no font will\MessageBreak
+        be set up for char protruding.%
+        }%
+      }{%
+      \CPROT@packageerror{%
+        Your given value '#1' to size in \string\setupcharprotrudingnumeral\MessageBreak
+        is not valid. Sensible values are between 1 and 1023 (inclusive).\MessageBreak
+        For further information see the pdfcprot manual.%
+        }%
+      }%
+    }%
+  }
+\define@key{CPROTnum}{textcomp}[true]{%
+  \setkeys{CPROT}{textcomp=#1}%
+}
+\define@key{CPROTpackage}{activate}[normal]{%
+  \ifthenelse{\equal{#1}{normal}}{%
+    \CPROT@setupcharprotruding@normal%
+    \ifthenelse{\equal{\CPROT@setprotcodes@}{}}{%
+    }{% just activate char prot when something was set
+      \activatecharprotruding[true]%
+    }%
+  }{%
+    \ifthenelse{\equal{#1}{none}}{%
+    }{%
+      \CPROT@packageerror{%
+        Value of activate can be 'normal' or 'none'.\MessageBreak%
+        \space For more low level setup use \string\setupcharprotruding\MessageBreak%
+        and see the manual%
+        }%
+      }%
+    }%
+  }%
+\define@key{CPROTpackage}{quiet}[true]{%
+  \ifthenelse{\equal{#1}{true}\or\equal{#1}{on}\or\equal{#1}{yes}\or\equal{#1}{1}}{%
+    \setboolean{CPROT@quiet}{true}%
+    }{%
+    \ifthenelse{\equal{#1}{false}\or\equal{#1}{off}\or\equal{#1}{no}\or\equal{#1}{0}}{%
+      \setboolean{CPROT@quiet}{false}%
+      }{%
+      \CPROT@packageerror{%
+        Value of quiet should be 'true' ('on', 'yes, '1') or\MessageBreak%
+        'false' ('off', 'no', '0'). You didn't seem to use any\MessageBreak%
+        of them.%
+        }%
+      }%
+    }%
+  }%
+\newcommand{\CPROT@aac@encoding}{%
+  \ifthenelse{\equal{\CPROT@lowlevel@encoding}{}}{%
+      \setcounter{CPROT@family@temp}{\value{CPROT@family}}%
+      \CPROT@aac@family{}%
+    }{%
+      \@for \CPROT@aac@encoding@first:=\CPROT@lowlevel@encoding \do {%
+        \setcounter{CPROT@family@temp}{\value{CPROT@family}}%
+        \expandafter\ifx\csname T@\CPROT@aac@encoding@first\endcsname\relax%
+          \ifthenelse{\boolean{CPROT@quiet}}{%
+            \CPROT@packagewarning{Encoding \CPROT@aac@encoding@first not defined\MessageBreak
+              (see log file for more information)}
+          }{}%
+          \CPROT@packageinfo@or@warning{%
+            You've requested char protruding for \CPROT@aac@encoding@first encoding\MessageBreak
+            but \CPROT@aac@encoding@first encoding doesn't seem to be loaded.\MessageBreak
+            Maybe you forgot a '\string\usepackage[\CPROT@aac@encoding@first]{fontenc}'.%
+          }%
+        \else
+          \CPROT@aac@family{\protect\fontencoding{\CPROT@aac@encoding@first}\selectfont}%
+        \fi
+      }%
+    }%
+  }
+\newcommand{\CPROT@aac@family}[1]{%
+  \ifthenelse{\value{CPROT@family@temp}>1}{%
+    \protected@edef\CPROT@setprotcodes@temp{#1\protect\rmfamily}%
+    \setcounter{CPROT@series@temp}{\value{CPROT@series}}%
+    \CPROT@aac@series{\CPROT@setprotcodes@temp}%
+    \addtocounter{CPROT@family@temp}{-2}%
+    \CPROT@aac@family{#1}%
+    }{%
+    \ifthenelse{\value{CPROT@family@temp}>0}{%
+      \protected@edef\CPROT@setprotcodes@temp{#1\protect\sffamily}%
+      \setcounter{CPROT@series@temp}{\value{CPROT@series}}%
+      \CPROT@aac@series{\CPROT@setprotcodes@temp}%
+      \addtocounter{CPROT@family@temp}{-1}%
+      \CPROT@aac@family{#1}%
+    }{%
+      \ifthenelse{\value{CPROT@family@temp}<0}{%
+      \protected@edef\CPROT@setprotcodes@temp{#1\fontfamily{\CPROT@lowlevel@family}\selectfont}%
+      \setcounter{CPROT@series@temp}{\value{CPROT@series}}%
+      \CPROT@aac@series{\CPROT@setprotcodes@temp}%
+    }{}%
+      }%
+    }%
+  }
+\newcommand{\CPROT@aac@series}[1]{%
+  \ifthenelse{\value{CPROT@series@temp}>1}{%
+    \protected@edef\CPROT@setprotcodes@temp{#1\protect\mdseries}%
+    \setcounter{CPROT@shape@temp}{\value{CPROT@shape}}%
+    \CPROT@aac@shape{\CPROT@setprotcodes@temp}%
+    \addtocounter{CPROT@series@temp}{-2}%
+    \CPROT@aac@series{#1}%
+    }{%
+    \ifthenelse{\value{CPROT@series@temp}>0}{%
+      \protected@edef\CPROT@setprotcodes@temp{#1\protect\bfseries}%
+      \setcounter{CPROT@shape@temp}{\value{CPROT@shape}}%
+      \CPROT@aac@shape{\CPROT@setprotcodes@temp}%
+      \addtocounter{CPROT@series@temp}{-1}%
+      \CPROT@aac@series{#1}%
+      }{%
+      \ifthenelse{\value{CPROT@series@temp}<0}{%
+        \protected@edef\CPROT@setprotcodes@temp{%
+          #1\fontseries\expandafter{\CPROT@lowlevel@series}\selectfont}%
+        \setcounter{CPROT@shape@temp}{\value{CPROT@shape}}%
+        \CPROT@aac@shape{\CPROT@setprotcodes@temp}%
+        }{}%
+      }%
+    }%
+  }
+\newcommand{\CPROT@aac@shape}[1]{%
+  \ifthenelse{\value{CPROT@shape@temp}>7}{%
+    \protected@edef\CPROT@setprotcodes@temp{#1\protect\upshape}%
+    \setcounter{CPROT@size@temp}{\value{CPROT@size}}%
+    \CPROT@aac@size{\CPROT@setprotcodes@temp}%
+    \addtocounter{CPROT@shape@temp}{-8}%
+    \CPROT@aac@shape{#1}%
+    }{%
+    \ifthenelse{\value{CPROT@shape@temp}>3}{%
+      \protected@edef\CPROT@setprotcodes@temp{#1\protect\itshape}%
+      \setcounter{CPROT@size@temp}{\value{CPROT@size}}%
+      \CPROT@aac@size{\CPROT@setprotcodes@temp}%
+      \addtocounter{CPROT@shape@temp}{-4}%
+      \CPROT@aac@shape{#1}%
+      }{%
+      \ifthenelse{\value{CPROT@shape@temp}>1}{%
+        \protected@edef\CPROT@setprotcodes@temp{#1\protect\slshape}%
+        \setcounter{CPROT@size@temp}{\value{CPROT@size}}%
+        \CPROT@aac@size{\CPROT@setprotcodes@temp}%
+        \addtocounter{CPROT@shape@temp}{-2}%
+        \CPROT@aac@shape{#1}%
+        }{%
+        \ifthenelse{\value{CPROT@shape@temp}>0}{%
+          \protected@edef\CPROT@setprotcodes@temp{#1\protect\scshape}%
+          \setcounter{CPROT@size@temp}{\value{CPROT@size}}%
+          \CPROT@aac@size{\CPROT@setprotcodes@temp}%
+          \addtocounter{CPROT@shape@temp}{-1}%
+          \CPROT@aac@shape{#1}%
+          }{%
+          \ifthenelse{\value{CPROT@shape@temp}<0}{%
+            \protected@edef\CPROT@setprotcodes@temp{%
+              #1\fontshape\expandafter{\CPROT@lowlevel@shape}\selectfont}%
+            \setcounter{CPROT@size@temp}{\value{CPROT@size}}%
+            \CPROT@aac@size{\CPROT@setprotcodes@temp}%
+            }{}%
+          }%
+        }%
+      }%
+    }%
+  }
+\newcommand{\CPROT@aac@size}[1]{%
+  \ifthenelse{\value{CPROT@size@temp}>511}{%
+    \protected@edef\CPROT@setprotcodes@temp{#1\protect\Huge}%
+    \CPROT@aac@textcomp{\CPROT@setprotcodes@temp}%
+    \addtocounter{CPROT@size@temp}{-512}%
+    \CPROT@aac@size{#1}%
+    }{%
+    \ifthenelse{\value{CPROT@size@temp}>255}{%
+      \protected@edef\CPROT@setprotcodes@temp{#1\protect\huge}%
+      \CPROT@aac@textcomp{\CPROT@setprotcodes@temp}%
+      \addtocounter{CPROT@size@temp}{-256}%
+      \CPROT@aac@size{#1}%
+      }{%
+      \ifthenelse{\value{CPROT@size@temp}>127}{%
+        \protected@edef\CPROT@setprotcodes@temp{#1\protect\LARGE}%
+        \CPROT@aac@textcomp{\CPROT@setprotcodes@temp}%
+        \addtocounter{CPROT@size@temp}{-128}%
+        \CPROT@aac@size{#1}%
+        }{%
+        \ifthenelse{\value{CPROT@size@temp}>63}{%
+          \protected@edef\CPROT@setprotcodes@temp{#1\protect\Large}%
+          \CPROT@aac@textcomp{\CPROT@setprotcodes@temp}%
+          \addtocounter{CPROT@size@temp}{-64}%
+          \CPROT@aac@size{#1}%
+          }{%
+          \ifthenelse{\value{CPROT@size@temp}>31}{%
+            \protected@edef\CPROT@setprotcodes@temp{#1\protect\large}%
+            \CPROT@aac@textcomp{\CPROT@setprotcodes@temp}%
+            \addtocounter{CPROT@size@temp}{-32}%
+            \CPROT@aac@size{#1}%
+            }{%
+            \ifthenelse{\value{CPROT@size@temp}>15}{%
+              \protected@edef\CPROT@setprotcodes@temp{#1\protect\normalsize}%
+              \CPROT@aac@textcomp{\CPROT@setprotcodes@temp}%
+              \addtocounter{CPROT@size@temp}{-16}%
+              \CPROT@aac@size{#1}%
+              }{%
+              \ifthenelse{\value{CPROT@size@temp}>7}{%
+                \protected@edef\CPROT@setprotcodes@temp{#1\protect\small}%
+                \CPROT@aac@textcomp{\CPROT@setprotcodes@temp}%
+                \addtocounter{CPROT@size@temp}{-8}%
+                \CPROT@aac@size{#1}%
+                }{%
+                \ifthenelse{\value{CPROT@size@temp}>3}{%
+                  \protected@edef\CPROT@setprotcodes@temp{#1\protect\footnotesize}%
+                  \CPROT@aac@textcomp{\CPROT@setprotcodes@temp}%
+                  \addtocounter{CPROT@size@temp}{-4}%
+                  \CPROT@aac@size{#1}%
+                  }{%
+                  \ifthenelse{\value{CPROT@size@temp}>1}{%
+                    \protected@edef\CPROT@setprotcodes@temp{#1\protect\scriptsize}%
+                    \CPROT@aac@textcomp{\CPROT@setprotcodes@temp}%
+                    \addtocounter{CPROT@size@temp}{-2}%
+                    \CPROT@aac@size{#1}%
+                    }{%
+                    \ifthenelse{\value{CPROT@size@temp}>0}{%
+                      \protected@edef\CPROT@setprotcodes@temp{#1\protect\protect\tiny}%
+                      \CPROT@aac@textcomp{\CPROT@setprotcodes@temp}%
+                      }{}%
+                    }%
+                  }%
+                }%
+              }%
+            }%
+          }%
+        }%
+      }%
+    }%
+  }
+\newcommand{\CPROT@aac@textcomp}[1]{%
+  \ifthenelse{\boolean{CPROT@textcomp}}{%
+    \@ifundefined{T@TS1}{%
+      \CPROT@packageinfo@or@warning{%
+        You've requested char protruding for TS1 encoding\MessageBreak
+        but TS1 encoding doesn't seem to be loaded.\MessageBreak
+        Maybe you forgot a '\string\usepackage{textcomp}'.%
+        }%
+      \setboolean{CPROT@textcomp}{false}%
+      }{}%
+    }{}%
+  \ifthenelse{\boolean{CPROT@textcomp}}{%
+    \protected@xdef\CPROT@setprotcodes@{%
+      \CPROT@setprotcodes@{%
+        #1\protect\CPROT@setprotcodes@font{%
+          \fontencoding{TS1}\selectfont\protect\CPROT@setprotcodes@font%
+          }%
+        }%
+      }%
+    }{%
+    \protected@xdef\CPROT@setprotcodes@{%
+      \CPROT@setprotcodes@{%
+        #1\protect\CPROT@setprotcodes@font%
+        }%
+      }%
+    }%
+  }
+\newcommand*{\activatecharprotruding}[1][true]{%
+  \ifpdftex{%
+    \ifthenelse{\equal{#1}{true}\or\equal{#1}{on}\or\equal{#1}{1}\or\equal{#1}{yes}}{%
+      \CPROT@good@pdftex@version{%
+        \global\pdfprotrudechars=2%
+       }
+      }{%
+      \ifthenelse{\equal{#1}{compatibility}\or\equal{#1}{compatible}}{%
+        \CPROT@good@pdftex@version{%
+          \global\pdfprotrudechars=1%
+          }%
+        }{%
+        \ifthenelse{\equal{#1}{false}\or\equal{#1}{off}\or\equal{#1}{0}\or\equal{#1}{no}}{%
+          \global\pdfprotrudechars=0%
+          }{%
+          \CPROT@packageerror{%
+            ``#1'' is no setting for \activatecharprotruding. Use\MessageBreak
+            one of 'true', 'on', 'yes', '1', or 'false', 'off', \MessageBreak
+            'no', '0', or 'compatible', 'compatibility' instead.%
+            }%
+          }{%
+          \CPROT@packageinfo@or@warning{%
+            You want to activate char protruding, but it does\MessageBreak
+            look as your are NOT using pdftex. So I can't\MessageBreak
+            activate it, as ``pdfcprot.sty'' only supports\MessageBreak
+            pdftex.}%
+          }%
+        }%
+      }%
+    }{}%
+  }
+\newcommand*{\setupcharprotruding}[1]{%
+  \ifpdftex{%
+    \CPROT@resetall{}%
+    \@ifundefined{CPROT@save@KV@errx}{%
+      \let\CPROT@save@KV@errx=\KV@errx%
+      \renewcommand*{\KV@errx}[1]{%
+        \CPROT@packageerror{option ##1 for \string\setupcharprotruding}{%
+          You've tried to use the option ##1 with \string\setupcharprotruding.\MessageBreak
+          But there is no option with that name.\MessageBreak
+          See the manual of ``pdfcprot.sty'' for information
+          about the usage of \string\setupcharprotruding.%
+          }%
+        }%
+      \setkeys{CPROT}{#1}%
+      \let\KV@errx=\CPROT@save@KV@errx%
+      \let\CPROT@save@KV@errx=\relax%
+      }{%
+      \setkeys{CPROT}{#1}%
+      }%
+    \CPROT@setprotcodes@add{}%
+    }{%
+    \CPROT@packageinfo@or@warning{%
+      You want to setup char protruding, but it does\MessageBreak
+      look as if you're NOT using pdftex. So I can't\MessageBreak
+      setup it, as ``pdfcprot.sty'' only supports\MessageBreak
+      pdftex.}%
+    }%
+  }
+\@onlypreamble\setupcharprotruding%
+\newcommand*{\setupcharprotrudingnumeral}[1]{%
+  \ifpdftex{%
+    \CPROT@resetall{}%
+    \@ifundefined{CPROT@save@KV@errx}{%
+      \let\CPROT@save@KV@errx=\KV@errx%
+      \renewcommand*{\KV@errx}[1]{%
+        \CPROT@packageerror{option ##1 for \string\setupcharprotrudingnumeral}{%
+          You've tried to use the option ##1 with \string\setupcharprotrudingnumeral.\MessageBreak
+          But there is no option with that name.\MessageBreak
+          See the manual of ``pdfcprot.sty'' for information
+          about the usage of \string\setupcharprotrudingnumeral.%
+          }%
+        }%
+      \setkeys{CPROTnum}{#1}%
+      \let\KV@errx=\CPROT@save@KV@errx%
+      \let\CPROT@save@KV@errx=\relax%
+      }{%
+      \setkeys{CPROTnum}{#1}%
+      }%
+    \CPROT@setprotcodes@add{}%
+    }{%
+    \CPROT@packageinfo@or@warning{%
+      You want to setup char protruding, but it does\MessageBreak
+      look as if you're NOT using pdftex. So I can't\MessageBreak
+      setup it, as ``pdfcprot.sty'' only supports\MessageBreak
+      pdftex.}%
+    }%
+  }
+\@onlypreamble\setupcharprotrudingnumeral
+\newcommand{\ifpdftex}{%
+  \ifx\pdftexversion\@undefined
+    \expandafter\@secondoftwo
+  \else
+    \ifx\pdftexversion\relax
+      \expandafter\expandafter\expandafter\@secondoftwo
+    \else
+      \expandafter\expandafter\expandafter\@firstoftwo
+    \fi
+  \fi
+}
+\newcommand{\CPROT@packageerror@bad@pdftex}{%
+  \CPROT@packageerror{You used a pdftex version older than 0.14f.\MessageBreak
+    pdfcprot does not support such old versions of pdftex. \MessageBreak
+    Please install a new version of pdftex.}%
+}
+\newcommand{\CPROT@good@pdftex@version}[1]{%
+  \ifnum\pdftexversion < 14
+    \CPROT@packageerror@bad@pdftex %
+  \else
+    \ifnum\pdftexversion = 14
+      \ifnum \expandafter`\pdftexrevision < `f
+        \CPROT@packageerror@bad@pdftex %
+      \else
+        #1
+      \fi
+    \else
+      #1
+    \fi
+  \fi
+}
+\newcommand*{\CPROT@ifpdfoutput}{%
+  \ifcase 0%
+          \ifx\pdfoutput\@undefined 1%
+          \else
+            \ifx\pdfoutput\relax    1%
+            \else
+              \ifcase\pdfoutput     1%
+              \fi
+            \fi
+          \fi
+          \space
+    \expandafter\@firstoftwo
+  \else
+    \expandafter\@secondoftwo
+  \fi
+}
+\@ifundefined{ifpdfoutput}{\let\ifpdfoutput\CPROT@ifpdfoutput}{%
+  \CPROT@packageinfo{%
+    \string\ifpdfoutput\space already defined.\MessageBreak
+    That may happen when using KOMA-Script together\MessageBreak
+    with ``pdfcprot.sty''. I have changed the definition\MessageBreak
+    from Markus' KOMA-Script, so if you experience errors\MessageBreak
+    try \string\let\string\ifpdfoutput\string\relax\space before loading ``pdfcprot.sty''.}%
+  }
+\newcommand*{\CPROT@packageoptions}[1]{%
+  \@ifundefined{CPROT@save@KV@errx}{%
+    \let\CPROT@save@KV@errx=\KV@errx%
+    \renewcommand*{\KV@errx}[1]{%
+      \PackageError{pdfcprot}{unknown option ``#1''}{%
+        You've tried to use the option ``#1''.\MessageBreak
+        But there is no option with that name.\MessageBreak
+        See the manual of ``pdfcprot.sty'' for information
+        about known options.%
+        }%
+      }%
+    \setkeys{CPROTpackage}{#1}%
+    \let\KV@errx=\CPROT@save@KV@errx%
+    \let\CPROT@save@KV@errx=\relax%
+    }{%
+    \setkeys{CPROTpackage}{#1}%
+    }%
+  }
+\DeclareOption{DVIoutput}{%
+  \CPROT@packagewarning{%
+    It is not a good idea to use the DVIoutput package
+    option.\MessageBreak
+    Use it only if you experience some using other
+    packages.\MessageBreak
+    And don't forget to file a bug report against these
+    packages.\MessageBreak
+    The best is to add just \string\pdfoutput=0\space at the beginning\MessageBreak
+    of your preamble or even before \string\documentclass.
+  }
+  \ifpdftex{%
+    \pdfoutput=0%
+    \let\pdfoutput\undefined
+    }{}%
+  }
+\DeclareOption*{%
+  \ifpdftex{%
+    \expandafter\CPROT@packageoptions\expandafter{\CurrentOption}%
+    }{}%
+  }%
+\newcommand*{\CPROT@fallbackfont}{pplmn}
+\newcommand*{\setfallbackfont}[1]{\renewcommand*{\CPROT@fallbackfont}{#1}}
+\newcommand*{\CPROT@setupcharprotruding@normal}{%
+  \setupcharprotrudingnumeral{family=3,series=1,shape=8,size=60,textcomp=1}%
+  \setupcharprotrudingnumeral{family=2,series=2,shape=12,size=60,textcomp=1}%
+  \setupcharprotrudingnumeral{family=1,series=2,shape=14,size=60,textcomp=1}%
+  }
+\newcommand*{\setupcharprotrudingforencoding}[1]{%
+  \setupcharprotrudingnumeral{encoding={#1},family=3,series=1,shape=8,size=60,textcomp=1}%
+  \setupcharprotrudingnumeral{encoding={#1},family=2,series=2,shape=12,size=60,textcomp=1}%
+  \setupcharprotrudingnumeral{encoding={#1},family=1,series=2,shape=14,size=60,textcomp=1}%
+  }
+\@onlypreamble\setupcharprotrudingforencoding
+\InputIfFileExists{pdfcprot.cfg}
+           {\typeout{***************************************^^J%
+                     * Local config file pdfcrpot.cfg used *^^J%
+                     ***************************************}}
+           {}
+\ProcessOptions\relax
+\newcommand*{\CPROT@actualfont}{%
+  \f@family%
+  \f@series%
+  \f@shape%
+  \f@encoding%
+  }
+\@onlypreamble\setfallbackfont%
+\newcommand*{\CPROT@cpa@toload}{}
+\newcommand*{\CPROT@setprotcodes@font}{%
+  \renewcommand*{\CPROT@cpa@toload}{\CPROT@actualfont.cpa}%
+  \IfFileExists{\CPROT@cpa@toload}{%
+    \expandafter\@ifundefined\expandafter{\CPROT@actualfont}{%
+      \input{\CPROT@cpa@toload}
+      }{}
+    \csname\CPROT@actualfont\endcsname%
+    \CPROT@adjustprotcodes{\font}%
+    \CPROT@packageinfo{%
+      File \CPROT@cpa@toload{} for the adjustment of\MessageBreak
+      the char protruding used. It seems to be _fit_\MessageBreak
+      to the font you requested.%
+      }%
+    }{%
+    \CPROT@packageinfo@or@warning{%
+      I didn't find \CPROT@cpa@toload.\MessageBreak%
+      \space As a fallback I will try \CPROT@fallbackfont\f@encoding.cpa.%
+      }%
+    \renewcommand*{\CPROT@cpa@toload}{\CPROT@fallbackfont\f@encoding.cpa}%
+    \IfFileExists{\CPROT@cpa@toload}{%
+      \expandafter\@ifundefined\expandafter{\CPROT@fallbackfont\f@encoding}{%
+        \input{\CPROT@cpa@toload}%
+        }{}%
+      \csname\CPROT@fallbackfont\f@encoding\endcsname%
+      \CPROT@adjustprotcodes{\font}%
+      \CPROT@packageinfo{%
+        File \CPROT@cpa@toload{} used for the adjustment\MessageBreak
+        of the char protruding. It seems that it isn't the one\MessageBreak
+        you intended to use.%
+        }%
+      }{%
+      \CPROT@packageinfo@or@warning{%
+        Even the fallback font was not found. Maybe it's\MessageBreak
+        not the right font encoding. Currently ``pdfcprot''\MessageBreak
+        bundles only with cpa's for T1, OT1 and TS1 encoding.%
+        }%
+      }%
+    }%
+  }
+\newif\ifCPROT@adjustprotcodes@
+\newcommand*{\CPROT@adjustprotcodes}[1]{%
+  \CPROT@adjustprotcodes@false
+  \ifnum\pdftexversion > 14
+    \CPROT@adjustprotcodes@true
+  \else
+    \ifnum\pdftexversion = 14
+      \ifnum \expandafter`\pdftexrevision > `g
+        \CPROT@adjustprotcodes@true
+      \fi
+    \fi
+  \fi
+  \ifCPROT@adjustprotcodes@
+    \@tempcnta=0
+    \loop
+      \ifcase\lpcode#1\@tempcnta\else
+        \CPROT@adjustprotcodes@@\lpcode{#1}\@tempcnta
+      \fi
+      \ifcase\rpcode#1\@tempcnta\else
+        \CPROT@adjustprotcodes@@\rpcode{#1}\@tempcnta
+      \fi
+      \advance\@tempcnta 1
+    \ifnum\@tempcnta < 256 \repeat
+   \fi
+  }
+\def\CPROT@adjustprotcodes@@#1#2#3{%
+  \setbox0=\hbox{\the#2\char#3}%
+  \@tempcntb=\wd0%
+  \multiply\@tempcntb #1#2#3%
+  \divide\@tempcntb \fontdimen6 #2%
+  #1#2#3=\@tempcntb%
+  }
+
+\newcommand*{\CPROT@setprotcodes}{%
+  \ifpdftex{%
+    \ifthenelse{\equal{\CPROT@setprotcodes@}{}}{%
+      }{%
+      \CPROT@setprotcodes@%
+      }%
+    }{}%
+  }
+
+\AtBeginDocument{%
+  \CPROT@setprotcodes\relax%
+  }
+\endinput
+%%
+%% End of file `pdfcprot.sty'.
diff --git a/Master/texmf-dist/tex/latex/pdfcprot/pplmnOT1.cpa b/Master/texmf-dist/tex/latex/pdfcprot/pplmnOT1.cpa
new file mode 100644
index 00000000000..728800403d2
--- /dev/null
+++ b/Master/texmf-dist/tex/latex/pdfcprot/pplmnOT1.cpa
@@ -0,0 +1,104 @@
+%%
+%% This is file `pplmnOT1.cpa',
+%% generated with the docstrip utility.
+%%
+%% The original source files were:
+%%
+%% pdfcprot.dtx  (with options: `pplmnOT1')
+%% Copyright (C) 2001 Carsten Schurig.
+%% Copyright (C) 2004 Tobias Schlemmer.
+%% Email: keinstein_junior@gmx.net
+%% 
+%% This program may be distributed and/or modified under the
+%% conditions of the LaTeX Project Public License, either version 1.2
+%% of this license or (at your option) any later version.
+%% The latest version of this license is in
+%% http://www.latex-project.org/lppl.txt
+%% and version 1.2 or later is part of all distributions of LaTeX
+%% version 1999/12/01 or later.
+%% 
+%% For a list of files constituting this program see README.txt. For
+%% further copyright information see README.txt and LEGAL.txt.
+%% 
+%% ----------------------------------------------------
+%% This file is part of the LaTeX2e pdfcprot bundle.
+%% ----------------------------------------------------
+%% Especially this code is heavily based on code by the
+%% authors of pdftex.
+%% ----------------------------------------------------
+%% 
+%%  This system is distributed in the hope that it will be useful,
+%%  but WITHOUT ANY WARRANTY; without even the implied warranty of
+%%  MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.
+%% 
+%% 
+%% IMPORTANT NOTICE:
+%% 
+%% For error reports in case of UNCHANGED versions see documentation.
+%% 
+%% Please do not request updates directly. Distribution is
+%% done through Mail-Servers, Mailboxes and TeX organizations.
+%% 
+%% You are not allowed to change this file.
+%% 
+%% You are allowed to distribute this file under the condition that
+%% it is distributed together with all files mentioned in README.txt.
+%% See LEGAL.txt for further information.
+%% 
+%% If you receive only some of these files from someone, complain!
+%% 
+%% You are NOT ALLOWED to distribute this file alone
+
+
+
+
+\expandafter\gdef\csname pplmnOT1\endcsname{%
+  \lpcode\font 92=500  % ``
+  \rpcode\font 34=500  % ''
+  \rpcode\font 123=300 % --
+  \rpcode\font 124=200 % ---
+  % set the protrusion of ",","-" and "." a bit smaller
+  % than originally suggested by Han The Than
+  \rpcode\font`\,=650
+  \rpcode\font`\-=650
+  \rpcode\font`\.=650
+  % originial Setting from Han The Thans protcode.tex
+  \rpcode\font`\!=200
+  \rpcode\font`\;=500
+  \rpcode\font`\:=500
+  \rpcode\font`\?=200
+  \lpcode\font`\`=700
+  \rpcode\font`\'=700
+  \rpcode\font`\)=50
+  \rpcode\font`\A=\rpcode\font`\A
+  \rpcode\font`\F=50
+  \rpcode\font`\K=50
+  \rpcode\font`\L=50
+  \rpcode\font`\T=50
+  \rpcode\font`\V=50
+  \rpcode\font`\W=50
+  \rpcode\font`\X=50
+  \rpcode\font`\Y=50
+  \rpcode\font`\k=50
+  \rpcode\font`\r=50
+  \rpcode\font`\t=50
+  \rpcode\font`\v=50
+  \rpcode\font`\w=50
+  \rpcode\font`\x=50
+  \rpcode\font`\y=50
+  \lpcode\font`\(=50
+  \lpcode\font`\A=50
+  \lpcode\font`\J=50
+  \lpcode\font`\T=50
+  \lpcode\font`\V=50
+  \lpcode\font`\W=50
+  \lpcode\font`\X=50
+  \lpcode\font`\Y=50
+  \lpcode\font`\v=50
+  \lpcode\font`\w=50
+  \lpcode\font`\x=50
+  \lpcode\font`\y=50
+}%
+\endinput
+%%
+%% End of file `pplmnOT1.cpa'.
diff --git a/Master/texmf-dist/tex/latex/pdfcprot/pplmnOT2.cpa b/Master/texmf-dist/tex/latex/pdfcprot/pplmnOT2.cpa
new file mode 100644
index 00000000000..de2c0896576
--- /dev/null
+++ b/Master/texmf-dist/tex/latex/pdfcprot/pplmnOT2.cpa
@@ -0,0 +1,122 @@
+%%
+%% This is file `pplmnOT2.cpa',
+%% generated with the docstrip utility.
+%%
+%% The original source files were:
+%%
+%% pdfcprot.dtx  (with options: `pplmnOT2')
+%% Copyright (C) 2001 Carsten Schurig.
+%% Copyright (C) 2004 Tobias Schlemmer.
+%% Email: keinstein_junior@gmx.net
+%% 
+%% This program may be distributed and/or modified under the
+%% conditions of the LaTeX Project Public License, either version 1.2
+%% of this license or (at your option) any later version.
+%% The latest version of this license is in
+%% http://www.latex-project.org/lppl.txt
+%% and version 1.2 or later is part of all distributions of LaTeX
+%% version 1999/12/01 or later.
+%% 
+%% For a list of files constituting this program see README.txt. For
+%% further copyright information see README.txt and LEGAL.txt.
+%% 
+%% ----------------------------------------------------
+%% This file is part of the LaTeX2e pdfcprot bundle.
+%% ----------------------------------------------------
+%% Especially this code is heavily based on code by the
+%% authors of pdftex.
+%% ----------------------------------------------------
+%% 
+%%  This system is distributed in the hope that it will be useful,
+%%  but WITHOUT ANY WARRANTY; without even the implied warranty of
+%%  MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.
+%% 
+%% 
+%% IMPORTANT NOTICE:
+%% 
+%% For error reports in case of UNCHANGED versions see documentation.
+%% 
+%% Please do not request updates directly. Distribution is
+%% done through Mail-Servers, Mailboxes and TeX organizations.
+%% 
+%% You are not allowed to change this file.
+%% 
+%% You are allowed to distribute this file under the condition that
+%% it is distributed together with all files mentioned in README.txt.
+%% See LEGAL.txt for further information.
+%% 
+%% If you receive only some of these files from someone, complain!
+%% 
+%% You are NOT ALLOWED to distribute this file alone
+
+
+
+
+\expandafter\gdef\csname pplmnOT2\endcsname{%
+  \lpcode\font 92=500  % ``
+  \rpcode\font 34=500  % ''
+  \rpcode\font 123=300 % --
+  \rpcode\font 124=200 % ---
+  \rpcode\font\cyrdash=200 % "---
+  \lpcode\font\cyrdash=200 % "--*
+  % set the protrusion of ",","-" and "." a bit smaller
+  % than originally suggested by Han The Than
+  \rpcode\font`\,=650
+  \rpcode\font`\-=650
+  \rpcode\font`\.=650
+  % originial Setting from Han The Thans protcode.tex
+  \rpcode\font`\!=200
+  \rpcode\font`\;=500
+  \rpcode\font`\:=500
+  \rpcode\font`\?=200
+  \lpcode\font`\`=700
+  \rpcode\font`\'=700
+  \rpcode\font`\)=50
+  \lpcode\font`\(=50
+  \rpcode\font\CYRA=50
+  \rpcode\font\CYRK=50
+  \rpcode\font\CYRT=50
+  \rpcode\font\CYRH=50
+  \rpcode\font\CYRU=50
+  \rpcode\font\CYRG=50
+  \rpcode\font\CYRZH=50
+  \rpcode\font\CYRL=50
+  \rpcode\font\CYRC=20
+  \rpcode\font\CYRSHCH=10
+  \rpcode\font\CYRHRDSN=50
+  \rpcode\font\CYRSFTSN=50
+  \rpcode\font\cyrk=50
+  \rpcode\font\cyrt=50
+  \rpcode\font\cyrh=50
+  \rpcode\font\cyru=50
+  \rpcode\font\cyrg=50
+  \rpcode\font\cyrzh=50
+  \rpcode\font\cyrl=50
+  \rpcode\font\cyrc=20
+  \rpcode\font\cyrshch=10
+  \rpcode\font\cyrhrdsn=50
+  \rpcode\font\cyrsftsn=50
+  \lpcode\font\CYRA=50
+  \lpcode\font\CYRT=50
+  \lpcode\font\CYRH=50
+  \lpcode\font\CYRU=50
+  \lpcode\font\CYRZH=50
+  \lpcode\font\CYRL=50
+  \lpcode\font\CYRU=50
+  \lpcode\font\CYRCH=50
+  \lpcode\font\CYRHRDSN=50
+  \lpcode\font\CYRD=50
+  \lpcode\font\cyra=50
+  \lpcode\font\cyrt=50
+  \lpcode\font\cyrh=50
+  \lpcode\font\cyru=50
+  \lpcode\font\cyrzh=50
+  \lpcode\font\cyrl=50
+  \lpcode\font\cyru=50
+  \lpcode\font\cyrch=50
+  \lpcode\font\cyrhrdsn=50
+  \lpcode\font\cyrd=50
+}%
+\endinput
+%%
+%% End of file `pplmnOT2.cpa'.
diff --git a/Master/texmf-dist/tex/latex/pdfcprot/pplmnT1.cpa b/Master/texmf-dist/tex/latex/pdfcprot/pplmnT1.cpa
new file mode 100644
index 00000000000..5c7f3cba310
--- /dev/null
+++ b/Master/texmf-dist/tex/latex/pdfcprot/pplmnT1.cpa
@@ -0,0 +1,108 @@
+%%
+%% This is file `pplmnT1.cpa',
+%% generated with the docstrip utility.
+%%
+%% The original source files were:
+%%
+%% pdfcprot.dtx  (with options: `pplmnT1')
+%% Copyright (C) 2001 Carsten Schurig.
+%% Copyright (C) 2004 Tobias Schlemmer.
+%% Email: keinstein_junior@gmx.net
+%% 
+%% This program may be distributed and/or modified under the
+%% conditions of the LaTeX Project Public License, either version 1.2
+%% of this license or (at your option) any later version.
+%% The latest version of this license is in
+%% http://www.latex-project.org/lppl.txt
+%% and version 1.2 or later is part of all distributions of LaTeX
+%% version 1999/12/01 or later.
+%% 
+%% For a list of files constituting this program see README.txt. For
+%% further copyright information see README.txt and LEGAL.txt.
+%% 
+%% ----------------------------------------------------
+%% This file is part of the LaTeX2e pdfcprot bundle.
+%% ----------------------------------------------------
+%% Especially this code is heavily based on code by the
+%% authors of pdftex.
+%% ----------------------------------------------------
+%% 
+%%  This system is distributed in the hope that it will be useful,
+%%  but WITHOUT ANY WARRANTY; without even the implied warranty of
+%%  MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.
+%% 
+%% 
+%% IMPORTANT NOTICE:
+%% 
+%% For error reports in case of UNCHANGED versions see documentation.
+%% 
+%% Please do not request updates directly. Distribution is
+%% done through Mail-Servers, Mailboxes and TeX organizations.
+%% 
+%% You are not allowed to change this file.
+%% 
+%% You are allowed to distribute this file under the condition that
+%% it is distributed together with all files mentioned in README.txt.
+%% See LEGAL.txt for further information.
+%% 
+%% If you receive only some of these files from someone, complain!
+%% 
+%% You are NOT ALLOWED to distribute this file alone
+
+
+
+
+\expandafter\gdef\csname pplmnT1\endcsname{%
+  \lpcode\font 16=500  % ``
+  \rpcode\font 17=500  % ''
+  \rpcode\font 21=300 % --
+  \rpcode\font 22=200 % ---
+  \lpcode\font\quotedblbase=600
+  \rpcode\font\textquotedblleft=500
+  % set the protrusion of ",","-" and "." a bit smaller
+  % than originally suggested by Han The Than
+  \rpcode\font`\,=650
+  \rpcode\font`\-=650
+  \rpcode\font`\.=650
+  % originial Setting from Han The Thans protcode.tex
+  \rpcode\font`\!=200
+  \rpcode\font`\;=500
+  \rpcode\font`\:=500
+  \rpcode\font`\?=200
+  \lpcode\font`\`=700
+  \rpcode\font`\'=700
+  \rpcode\font`\)=50
+  \rpcode\font`\A=\rpcode\font`\A
+  \rpcode\font 196=50 % A umlaut
+  \rpcode\font`\F=50
+  \rpcode\font`\K=50
+  \rpcode\font`\L=50
+  \rpcode\font`\T=50
+  \rpcode\font`\V=50
+  \rpcode\font`\W=50
+  \rpcode\font`\X=50
+  \rpcode\font`\Y=50
+  \rpcode\font`\k=50
+  \rpcode\font`\r=50
+  \rpcode\font`\t=50
+  \rpcode\font`\v=50
+  \rpcode\font`\w=50
+  \rpcode\font`\x=50
+  \rpcode\font`\y=50
+  \lpcode\font`\(=50
+  \lpcode\font`\A=50
+  \lpcode\font 196=\lpcode\font`\A % A umlaut
+  \lpcode\font`\J=50
+  \lpcode\font`\T=50
+  \lpcode\font`\V=50
+  \lpcode\font`\W=50
+  \lpcode\font`\X=50
+  \lpcode\font`\Y=50
+  \lpcode\font`\v=50
+  \lpcode\font`\w=50
+  \lpcode\font`\x=50
+  \lpcode\font`\y=50
+}%
+\endinput
+%%
+%% End of file `pplmnT1.cpa'.
diff --git a/Master/texmf-dist/tex/latex/pdfcprot/pplmnT2A.cpa b/Master/texmf-dist/tex/latex/pdfcprot/pplmnT2A.cpa
new file mode 100644
index 00000000000..2ba5f713f27
--- /dev/null
+++ b/Master/texmf-dist/tex/latex/pdfcprot/pplmnT2A.cpa
@@ -0,0 +1,151 @@
+%%
+%% This is file `pplmnT2A.cpa',
+%% generated with the docstrip utility.
+%%
+%% The original source files were:
+%%
+%% pdfcprot.dtx  (with options: `pplmnT2A')
+%% Copyright (C) 2001 Carsten Schurig.
+%% Copyright (C) 2004 Tobias Schlemmer.
+%% Email: keinstein_junior@gmx.net
+%% 
+%% This program may be distributed and/or modified under the
+%% conditions of the LaTeX Project Public License, either version 1.2
+%% of this license or (at your option) any later version.
+%% The latest version of this license is in
+%% http://www.latex-project.org/lppl.txt
+%% and version 1.2 or later is part of all distributions of LaTeX
+%% version 1999/12/01 or later.
+%% 
+%% For a list of files constituting this program see README.txt. For
+%% further copyright information see README.txt and LEGAL.txt.
+%% 
+%% ----------------------------------------------------
+%% This file is part of the LaTeX2e pdfcprot bundle.
+%% ----------------------------------------------------
+%% Especially this code is heavily based on code by the
+%% authors of pdftex.
+%% ----------------------------------------------------
+%% 
+%%  This system is distributed in the hope that it will be useful,
+%%  but WITHOUT ANY WARRANTY; without even the implied warranty of
+%%  MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.
+%% 
+%% 
+%% IMPORTANT NOTICE:
+%% 
+%% For error reports in case of UNCHANGED versions see documentation.
+%% 
+%% Please do not request updates directly. Distribution is
+%% done through Mail-Servers, Mailboxes and TeX organizations.
+%% 
+%% You are not allowed to change this file.
+%% 
+%% You are allowed to distribute this file under the condition that
+%% it is distributed together with all files mentioned in README.txt.
+%% See LEGAL.txt for further information.
+%% 
+%% If you receive only some of these files from someone, complain!
+%% 
+%% You are NOT ALLOWED to distribute this file alone
+
+
+
+
+\expandafter\gdef\csname pplmnT2A\endcsname{%
+  \lpcode\font 16=500  % ``
+  \rpcode\font 17=500  % ''
+  \rpcode\font 21=300 % --
+  \rpcode\font 22=200 % ---
+  \rpcode\font\cyrdash=200 % "---
+  \lpcode\font\cyrdash=200 % "--*
+  \lpcode\font\quotedblbase=600
+  \rpcode\font\textquotedblleft=500
+  % set the protrusion of ",","-" and "." a bit smaller
+  % than originally suggested by Han The Than
+  \rpcode\font`\,=650
+  \rpcode\font`\-=650
+  \rpcode\font`\.=650
+  % originial Setting from Han The Thans protcode.tex
+  \rpcode\font`\!=200
+  \rpcode\font`\;=500
+  \rpcode\font`\:=500
+  \rpcode\font`\?=200
+  \lpcode\font`\`=700
+  \rpcode\font`\'=700
+  \rpcode\font`\)=50
+  \rpcode\font`\A=\rpcode\font`\A
+  \rpcode\font`\F=50
+  \rpcode\font`\K=50
+  \rpcode\font`\L=50
+  \rpcode\font`\T=50
+  \rpcode\font`\V=50
+  \rpcode\font`\W=50
+  \rpcode\font`\X=50
+  \rpcode\font`\Y=50
+  \rpcode\font`\k=50
+  \rpcode\font`\r=50
+  \rpcode\font`\t=50
+  \rpcode\font`\v=50
+  \rpcode\font`\w=50
+  \rpcode\font`\x=50
+  \rpcode\font`\y=50
+  \lpcode\font`\(=50
+  \lpcode\font`\A=50
+  \lpcode\font`\J=50
+  \lpcode\font`\T=50
+  \lpcode\font`\V=50
+  \lpcode\font`\W=50
+  \lpcode\font`\X=50
+  \lpcode\font`\Y=50
+  \lpcode\font`\v=50
+  \lpcode\font`\w=50
+  \lpcode\font`\x=50
+  \lpcode\font`\y=50
+  \rpcode\font\CYRA=50
+  \rpcode\font\CYRK=50
+  \rpcode\font\CYRT=50
+  \rpcode\font\CYRH=50
+  \rpcode\font\CYRU=50
+  \rpcode\font\CYRG=50
+  \rpcode\font\CYRZH=50
+  \rpcode\font\CYRL=50
+  \rpcode\font\CYRC=20
+  \rpcode\font\CYRSHCH=10
+  \rpcode\font\CYRHRDSN=50
+  \rpcode\font\CYRSFTSN=50
+  \rpcode\font\cyrk=50
+  \rpcode\font\cyrt=50
+  \rpcode\font\cyrh=50
+  \rpcode\font\cyru=50
+  \rpcode\font\cyrg=50
+  \rpcode\font\cyrzh=50
+  \rpcode\font\cyrl=50
+  \rpcode\font\cyrc=20
+  \rpcode\font\cyrshch=10
+  \rpcode\font\cyrhrdsn=50
+  \rpcode\font\cyrsftsn=50
+  \lpcode\font\CYRA=50
+  \lpcode\font\CYRT=50
+  \lpcode\font\CYRH=50
+  \lpcode\font\CYRU=50
+  \lpcode\font\CYRZH=50
+  \lpcode\font\CYRL=50
+  \lpcode\font\CYRU=50
+  \lpcode\font\CYRCH=50
+  \lpcode\font\CYRHRDSN=50
+  \lpcode\font\CYRD=50
+  \lpcode\font\cyra=50
+  \lpcode\font\cyrt=50
+  \lpcode\font\cyrh=50
+  \lpcode\font\cyru=50
+  \lpcode\font\cyrzh=50
+  \lpcode\font\cyrl=50
+  \lpcode\font\cyru=50
+  \lpcode\font\cyrch=50
+  \lpcode\font\cyrhrdsn=50
+  \lpcode\font\cyrd=50
+}%
+\endinput
+%%
+%% End of file `pplmnT2A.cpa'.
diff --git a/Master/texmf-dist/tex/latex/pdfcprot/pplmnTS1.cpa b/Master/texmf-dist/tex/latex/pdfcprot/pplmnTS1.cpa
new file mode 100644
index 00000000000..f2416c03ece
--- /dev/null
+++ b/Master/texmf-dist/tex/latex/pdfcprot/pplmnTS1.cpa
@@ -0,0 +1,60 @@
+%%
+%% This is file `pplmnTS1.cpa',
+%% generated with the docstrip utility.
+%%
+%% The original source files were:
+%%
+%% pdfcprot.dtx  (with options: `pplmnTS1')
+%% Copyright (C) 2001 Carsten Schurig.
+%% Copyright (C) 2004 Tobias Schlemmer.
+%% Email: keinstein_junior@gmx.net
+%% 
+%% This program may be distributed and/or modified under the
+%% conditions of the LaTeX Project Public License, either version 1.2
+%% of this license or (at your option) any later version.
+%% The latest version of this license is in
+%% http://www.latex-project.org/lppl.txt
+%% and version 1.2 or later is part of all distributions of LaTeX
+%% version 1999/12/01 or later.
+%% 
+%% For a list of files constituting this program see README.txt. For
+%% further copyright information see README.txt and LEGAL.txt.
+%% 
+%% ----------------------------------------------------
+%% This file is part of the LaTeX2e pdfcprot bundle.
+%% ----------------------------------------------------
+%% Especially this code is heavily based on code by the
+%% authors of pdftex.
+%% ----------------------------------------------------
+%% 
+%%  This system is distributed in the hope that it will be useful,
+%%  but WITHOUT ANY WARRANTY; without even the implied warranty of
+%%  MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.
+%% 
+%% 
+%% IMPORTANT NOTICE:
+%% 
+%% For error reports in case of UNCHANGED versions see documentation.
+%% 
+%% Please do not request updates directly. Distribution is
+%% done through Mail-Servers, Mailboxes and TeX organizations.
+%% 
+%% You are not allowed to change this file.
+%% 
+%% You are allowed to distribute this file under the condition that
+%% it is distributed together with all files mentioned in README.txt.
+%% See LEGAL.txt for further information.
+%% 
+%% If you receive only some of these files from someone, complain!
+%% 
+%% You are NOT ALLOWED to distribute this file alone
+
+
+
+
+\expandafter\gdef\csname pplmnTS1\endcsname{%
+  \rpcode\font 176=600 % \textdegree
+}
+\endinput
+%%
+%% End of file `pplmnTS1.cpa'.