rm splitindex, requires compilation

git-svn-id: svn://tug.org/texlive/trunk@12317 c570f23f-e606-0410-a88d-b1316a301751

22 files changed, 4 insertions, 3739 deletions

diff --git a/Master/texmf-dist/doc/latex/splitindex/README b/Master/texmf-dist/doc/latex/splitindex/README
deleted file mode 100644
index a722029a27d..00000000000
--- a/Master/texmf-dist/doc/latex/splitindex/README
+++ /dev/null
@@ -1,37 +0,0 @@
-Welcome to SplitIndex, the TeX index splitter. SplitIndex creates
-multiple index files from one raw index. See manifest.txt if you want
-to know the files SplitIndex exists of.
-
-There are a lot of alternatives in using SplitIndex, because I wanted
-solutions at every platform. Not all of the programs are distributed
-in binary form. But splitindex.tex will work at every platform. And you
-need only TeX (even not LaTeX) to run it.
-
-Currently I support binaries for the following platforms:
-
-	  Linux ELF i386, OpenBSD 3.0 i386, CygWIN Windows 32 Bit i386
-
-If you need support, you can write me a mail. Use
-
-   To: splitindex <komascript(at)gmx.info>
-   Subject: SPLITINDEX: <YourProblem>
-
-And replace <YourProblem> by a short (at least 60 chars) description
-of your problem.
-
-
-See file install.txt for a description how to install this
-distribution and how to get the manual, which describes how to use
-SplitIndex.
-
-LEGALESE: This package is freely distributable software; you can
-          redistribute it and/or modify it under the conditions of the
-          LaTeX Project Public License, either version 1.2 of this
-          license or (at your option) any later version. 
-	  The latest version of this license is in
-          http://www.latex-project.org/lppl.txt and version 1.2 or
-          later is part of all distributions of LaTeX version
-          1999/12/01 or later.
-
-
-Enjoy, Markus.
diff --git a/Master/texmf-dist/doc/latex/splitindex/install.sh b/Master/texmf-dist/doc/latex/splitindex/install.sh
deleted file mode 100644
index c27b4796ca2..00000000000
--- a/Master/texmf-dist/doc/latex/splitindex/install.sh
+++ /dev/null
@@ -1,178 +0,0 @@
-#!/bin/sh
-
-while [ $# -gt 0 ]; do
-    case $1 in
-	--prefix)
-	    if [ $# -lt 2 ]; then
-		echo "$0: argument expected after --prefix" >&2
-		exit 1
-	    else
-		prefix=$2
-		shift 2
-	    fi
-	    ;;
-	--prefix=*)
-	    prefix=${1#--prefix=}
-	    shift 1
-	    ;;
-	--bindir)
-	    if [ $# -lt 2 ]; then
-		echo "$0: argument expected after --bindir" >&2
-		exit 1
-	    else
-		bindir=$2
-		shift 2
-	    fi
-	    ;;
-	--bindir=*)
-	    bindir=${1#--bindir=}
-	    shift 1
-	    ;;
-	--mandir)
-	    if [ $# -lt 2 ]; then
-		echo "$0: argument expected after --mandir" >&2
-		exit 1
-	    else
-		mandir=$2
-		shift 2
-	    fi
-	    ;;
-	--mandir=*)
-	    mandir=${1#--mandir=}
-	    shift 1
-	    ;;
-	--texmf)
-	    if [ $# -lt 2 ]; then
-		echo "$0: argument expected after --texmf" >&2
-		exit 1
-	    else
-		texmf=$2
-		shift 2
-	    fi
-	    ;;
-	--texmf=*)
-	    texmf=${1#--texmf=}
-	    shift 1
-	    ;;
-	--version|-v)
-	    echo "install.sh v0.1"
-	    echo "Copyright (c) Markus Kohm 2002"
-	    exit 0
-	    ;;
-	--help|-h)
-	    echo "Usage: install.sh [OPTIONS]"
-	    echo
-	    echo "Installs SplitIndex for all unix like environments."
-	    echo
-	    echo "OPTIONS:"
-	    echo "--prefix=<DIR>    install binaries at <DIR>/bin and manuals at <DIR>/man"
-	    echo "                  (default: /usr/local)"
-	    echo "--bindir=<DIR>    install binaries at <DIR>"
-	    echo "--mandir=<DIR>    install manuals at <DIR>"
-	    echo "--texmf=<DIR>     install packages and TeX programs at <DIR>/tex/latex/misc,"
-	    echo "                  documentation (dvi and pdf) at <DIR>/doc/latex/splitidx and"
-	    echo "                  sources at <DIR>/source/latex/splitidx"
-	    echo "                  (default: \$TEXMFLOCAL if you are root and \$HOMETEXMF if"
-	    echo "                  you are not root)"
-	    exit 0
-	    ;;
-	--dist)
-	    mkdir splitidx
-	    cp -a splitindex splitindex-Linux-i386
-	    cp -a splitindex.tex splitindex.pl splitindex.c splitindex.java \
-		  splitindex.class splitindex.exe splitidx.dtx splitidx.ins \
-		  splitindex-Linux-i386 splitindex-OpenBSD-i386 \
-		  splitindex.1 install.txt manifest.txt install.sh \
-		  README splitidx
-	    tar jcvf splitidx-`date -I`.tar.bz2 splitidx
-	    cd splitidx
-	    ./install.sh --prefix ../chroot --texmf ../chroot/texmf
-	    cd ..
-	    rm -r splitidx
-	    find chroot | sed 's/chroot\//+-/g;s/[a-z0-9]*\//-/g'
-	    exit 0
-	    ;;
-	*)
-	    echo "unkown option \`$1'" >&2
-	    echo "Try \`./install.sh --help' for more information." >&2
-	    exit 1;
-	    ;;
-    esac
-done
-
-case `uname -s -m` in
-    OpenBSD*i?86*)
-	cp -pf splitindex-OpenBSD-i386 splitindex
-	splitindex=splitindex
-	;;
-    Linux*i?86*)
-	cp -pf splitindex-Linux-i386 splitindex
-	splitindex=splitindex
-	;;
-    CYGWIN*i?86*)
-	splitindex=splitindex.exe
-	;;
-    *)
-	if ! ./splitindex -V; then
-	    echo 'Os '`uname -s -m`' not supported!'
-	    echo 'Trying to compile the source:'
-	    gcc -O3 -Wall -o splitindex splitindex.c || \
-		gcc -O3 -Wall -DNO_LONGOPT -o splitindex splitindex.c || \
-		echo 'You have to compile splitindex.c by your own!'
-	fi
-	if ./splitindex -V; then
-	    splitindex=splitindex
-	fi
-	;;
-esac
-
-if [ -z "$prefix" ]; then
-    prefix=/usr/local
-fi
-if [ -z "$bindir" ]; then
-    bindir=$prefix/bin
-fi
-if [ -z "$mandir" ]; then
-    mandir=$prefix/man
-fi
-if [ -z "$texmf" ]; then
-    if [ "r$USER" = "rroot" ]; then
-	texmf=`kpsexpand '$TEXMFLOCAL'`
-    else
-	texmf=`kpsexpand '$HOMETEXMF'`
-    fi
-    if [ -z "$texmf" ]; then
-	echo "kpsexpand '$TEXMFLOCAL' or kpsexpand '$HOMETEXMF' failed!" >&2
-	echo "You have to use option --texmf=<DIR>." >&2
-	echo "This error is fatal!" >&2
-	exit 1
-    fi
-fi
-
-latex splitidx.ins
-
-latex splitidx.dtx
-latex splitidx.dtx
-mkindex splitidx
-latex splitidx.dtx
-
-pdflatex splitidx.dtx
-pdflatex splitidx.dtx
-mkindex splitidx
-pdflatex splitidx.dtx
-
-install -v -m 755 -d $bindir
-install -v -m 755 -d $mandir/man1
-install -v -m 755 -d $texmf/tex/latex/misc
-install -v -m 755 -d $texmf/source/latex/splitidx
-install -v -m 755 -d $texmf/doc/latex/splitidx
-install -v -m 755 $splitindex splitindex.pl $bindir
-install -v -m 644 splitindex.class $bindir
-install -v -m 644 splitindex.1 $mandir/man1
-install -v -m 644 splitindex.tex splitidx.sty $texmf/tex/latex/misc
-install -v -m 644 splitidx.dvi splitidx.pdf $texmf/doc/latex/splitidx
-
-install -v README splitindex.c splitindex.java splitindex.exe \
-        splitindex-Linux-i386 splitindex-OpenBSD-i386 \
-        splitidx.dtx manifest.txt install.txt install.sh \
-        $texmf/source/latex/splitidx
diff --git a/Master/texmf-dist/doc/latex/splitindex/install.txt b/Master/texmf-dist/doc/latex/splitindex/install.txt
deleted file mode 100644
index b3277c4d803..00000000000
--- a/Master/texmf-dist/doc/latex/splitindex/install.txt
+++ /dev/null
@@ -1,131 +0,0 @@
-	SplitIndex Installation Guide
-
-		   2003/01/15
-
-
-INTRODUCTION
-============
-
-If you know how to install LaTeX packages and how to install binary
-programs, just do it. If you don't know, read the following. If you
-are using Linux-i386 or OpenBSD-i386 or another Unix like environment
-with installed Gnu fileutils and installed Gnu-C-Compiler, you may try
-install.sh for installation. See
-
-    ./install.sh --help
-
-for more information. If you don't have GCC, Linux-i386 or
-OpenBSD-i386 you may also use install.sh, but you have to compile
-and link splitindex.c before. See the splitidx manual for this.
-
-But you may also try the following step by step installation:
-
-
-HOW TO GENERATE THE splitidx PACKAGE
-====================================
-
-1st) process splitidx.ins with TeX or LaTeX, e.g. using the following
-input at a command shell (e.g. bash or command.com):
-
-	latex splitidx.ins
-
-Maybe you'll be asked, if you want to overwrite existing files. Answer
-this question with yes.
-
-2nd) have a look where your LaTeX Distribution searchs for
-files. With teTeX you can ask kpathsea for this, e.g. using a unix
-shell:
-
-	kpsexpand \$TEXMFLOCAL
-
-to use the local texmf tree or:
-
-	kpsexpand \$HOMETEXMF
-
-to use your private texmf tree. Following uses "TEXMF" to be a synonym
-for the texmf tree you want to use.
-
-3rd) create folder TEXMF/tex/latex/misc (at Windows:
-TEXMF\tex\latex\misc), if it doesn't exist. Copy splitidx.sty to this
-folder.
-
-4th) call the program, which is used to update the filename data
-base, e.g. texhash or mktexlsr if you are using teTeX/TeX Live.
-
-
-HOW TO INSTALL THE BINARIES
-===========================
-
-5th) Rename the suitable binary (e.g. splitindex-Linux-i386, if you're
-using Linux-i386) to splitindex or compile splitindex.c to generate
-a binary named splitindex.
-
-6th) copy splitindex.java to the binary search path of SUN JAVA
-1.4.1.
-
-7th) copy splitindex.pl and splitindex or splitindex.exe somewhere to
-your binary search path (ask environment variable PATH).
-
-8th) copy the manual page splitindex.1 to your manual seach path.
-
-9th) copy splitindex.tex to the same location you've copied
-splitidx.sty to and do 4th step again.
-
-
-HOW TO GENERATE THE MANUAL
-==========================
-
-10th) process splitidx.dtx with LaTeX to generate the user manual of
-splitidx and SplitIndex, e.g. using the following input at a command
-shell:
-
-	latex splitidx.dtx
-	latex splitidx.dtx
-	mkindex splitidx
-	latex splitidx.dtx
-
-or (if you do not have the mkindex script):
-
-	latex splitidx.dtx
-	latex splitidx.dtx
-	makeindex -s gind.ist splitidx
-	makeindex -s gglo.ist -o splitidx.gls splitidx.glo
-	latex splitidx.dtx
-
-You may print the resulting splitidx.dvi. If you prefere PDF files,
-use pdflatex instead of latex.
-
-11th) read the manual you produced at 10th step.
-
-
-HOW TO TEST YOUR INSTALLATION
-=============================
-
-Use the following LaTeX source to test the installation. See
-splitidx.dvi or splitidx.pdf to see how to do this.
-
-\documentclass{article} %  We use \Class{article} class ...
-\usepackage{splitidx} % ... and the \Package{splitidx} package
-\makeindex %  And we want index generation
-\usepackage{hyperref}
-%  We define 4 indices:
-\newindex[General Index]{idx} %  Name and shortcut of the 1st index
-\newindex[Index of Animals]{ani} %  ... 2nd index
-\newindex[Index of Fruits]{fru} %  ... 3rd index
-\newindex[Index of Vegetables]{veg} % ... \dots\ 4th index
-
-\begin{document}
-Apples\sindex[fru]{apple} %  an entry to fru index
-and oranges\sindex[fru]{orange} %  an entry to fru index
-are fruits\sindex{fruits}. %  an implicite entry to idx index
-Tomatos\sindex[veg]{tomato} %  an entry to veg index
-are vegetables\index{vegetables}. %  an implicite entry to idx index
-Cats\sindex[ani]{cat} %  an entry to ani index
-are animals\sindex[idx]{animals}. %  an explicite entry to idx index
-
-\twocolumn[%
- \section*{Indices}%
- \markboth{Indices}{Indices}%
-]
-\printsubindex* %  print all indices
-\end{document}
diff --git a/Master/texmf-dist/doc/latex/splitindex/manifest.txt b/Master/texmf-dist/doc/latex/splitindex/manifest.txt
deleted file mode 100644
index 89dc68ddd16..00000000000
--- a/Master/texmf-dist/doc/latex/splitindex/manifest.txt
+++ /dev/null
@@ -1,63 +0,0 @@
-%
-% The following files form the SplitIndex Dsitribution 2002/01/05
-%
-%
-% CONTENTS OF THE SplitIndex DISTRIBUTION
-% =======================================
-%
-% Documentation:
-% --------------
-%
-% manifest.txt      --  This file.
-% install.txt       --  How to install SplitIndex (overview).
-% splitindex.1      --  The unix manual page of all SplitIndex
-%                       programs.
-%
-%
-% LaTeX files:
-% ------------
-%
-% splitidx.dtx      --  The source of the splitidx package and of the
-%                       manual.
-% splitidx.ins      --  The installation script for the splitidx
-%                       package.
-%
-%
-% Program sources:
-% ----------------
-%
-% splitindex.pl     --  The source of the reference implementation of
-%                       the SplitIndex program.
-% splitindex.java   --  The source of the SUN JAVA 1.4.1 implementation
-%                       of the SplitIndex program.
-% splitindex.c      --  The source of the C implementation of the
-%                       SplitIndex program.
-% splitindex.tex    --  The source of the TeX implementation of the
-%                       SplitIndex program.
-%
-%
-% Programs (binaries):
-% --------------------
-%
-% splitindex.pl     --  Perl is an interpreter, so this is the source
-%                       and the program itself (but not binary)
-% splitindex.class  --  The SUN JAVA 1.4.1 bitcode of the SplitIndex
-%                       program.
-% splitindex-Linux-i386
-%                   --  The Linux-i386-ELF binary of the SplitIndex
-%                       program.
-% splitindex-OpenBSD-i386
-%                   --  The OpenBSD-i386 binary of the SplitIndex
-%                       program.
-% splitindex.exe    --  The CygWin-i386 (Win32) binary the SplitIndex
-%                       program.
-%
-%
-% Installation programs:
-% ----------------------
-%
-% install.sh        --  See `install.txt' for more information about
-%                       this.
-%
-% ====================================================================
-%
diff --git a/Master/texmf-dist/doc/latex/splitindex/splitidx.pdf b/Master/texmf-dist/doc/latex/splitindex/splitidx.pdf
deleted file mode 100644
index 92a248ef686..00000000000
--- a/Master/texmf-dist/doc/latex/splitindex/splitidx.pdf
+++ /dev/null
diff --git a/Master/texmf-dist/doc/latex/splitindex/splitindex-Linux-i386 b/Master/texmf-dist/doc/latex/splitindex/splitindex-Linux-i386
deleted file mode 100644
index 42566f25083..00000000000
--- a/Master/texmf-dist/doc/latex/splitindex/splitindex-Linux-i386
+++ /dev/null
diff --git a/Master/texmf-dist/doc/latex/splitindex/splitindex-OpenBSD-i386 b/Master/texmf-dist/doc/latex/splitindex/splitindex-OpenBSD-i386
deleted file mode 100644
index 17e865dd061..00000000000
--- a/Master/texmf-dist/doc/latex/splitindex/splitindex-OpenBSD-i386
+++ /dev/null
diff --git a/Master/texmf-dist/doc/latex/splitindex/splitindex.1 b/Master/texmf-dist/doc/latex/splitindex/splitindex.1
deleted file mode 100644
index 98188409f60..00000000000
--- a/Master/texmf-dist/doc/latex/splitindex/splitindex.1
+++ /dev/null
@@ -1,64 +0,0 @@
-.TH SPLITINDEX "1" "November 2002" "splitindex 0.2a" "User Commands"
-.SH NAME
-splitindex \- manual page for splitindex 0.2a
-.SH SYNOPSIS
-.B splitindex.pl
-[\fIOPTION\fR]... \fIRAWINDEXFILE \fR[\fIMAKEINDEXOPTION\fR]...
-.PP
-.B splitindex
-[\fIOPTION\fR]... \fIRAWINDEXFILE \fR[\fIMAKEINDEXOPTION\fR]...
-.PP
-.B java splitindex
-[\fIOPTION\fR]... \fIRAWINDEXFILE \fR[\fIMAKEINDEXOPTION\fR]...
-.PP
-.B tex splitindex
-.SH DESCRIPTION
-splitindex 0.2a
-Copyright (c) 2002 Markus Kohm <kohm@gmx.de>
-.PP
-Split a single raw index file into multiple raw index files.
-.PP
-Example: splitindex.pl foo.idx.
-.SH OPTIONS
-.TP
-\fB\-h\fR, \fB\-\-help\fR
-show this help and terminate
-.TP
-\fB\-m\fR, \fB\-\-makeindex\fR PROGNAME
-call PROGNAME instead of default `makeindex'.
-.TP
-\fB\-i\fR, \fB\-\-identify\fR EXPRESSION
-use regular EXPRESSION to match entries
-(see also option \fB\-\-resultis\fR and \fB\-\-suffixis\fR).
-Default is `^(\e\eindexentry)\e[([^]]*)\e](.*)$'.
-.TP
-\fB\-r\fR, \fB\-\-resultis\fR PATTERN
-create line to be written from PATTERN after matching
-lines (see also option \fB\-\-identify\fR).
-Default is `$1$3'.
-.TP
-\fB\-s\fR, \fB\-\-suffixis\fR PATTERN
-create suffix to be used from PATTERN after matching
-lines (see also option \fB\-\-identify\fR).
-Default is `-$2'.
-.TP
-\fB\-v\fR, \fB\-\-verbose\fR
-be more verbose
-(can be used multiple to increase verbosity)
-.TP
-\fB\-\-version\fR
-show version and terminate
-.SH COPYRIGHT
-Copyright \(co 2002 Markus Kohm <kohm@gmx.de>
-.SH "SEE ALSO"
-The full documentation for
-.B splitindex
-is maintained as a LaTeX manual.  If the
-.B texdoc
-and
-.B splitindex
-programs are properly installed at your site, the command
-.IP
-.B texdoc splitidx
-.PP
-should give you access to the complete manual.
diff --git a/Master/texmf-dist/doc/latex/splitindex/splitindex.class b/Master/texmf-dist/doc/latex/splitindex/splitindex.class
deleted file mode 100644
index 288ad25d588..00000000000
--- a/Master/texmf-dist/doc/latex/splitindex/splitindex.class
+++ /dev/null
diff --git a/Master/texmf-dist/doc/latex/splitindex/splitindex.exe b/Master/texmf-dist/doc/latex/splitindex/splitindex.exe
deleted file mode 100644
index 08aa74d1291..00000000000
--- a/Master/texmf-dist/doc/latex/splitindex/splitindex.exe
+++ /dev/null
diff --git a/Master/texmf-dist/doc/latex/splitindex/splitindex.java b/Master/texmf-dist/doc/latex/splitindex/splitindex.java
deleted file mode 100644
index 9b52f9f7fdf..00000000000
--- a/Master/texmf-dist/doc/latex/splitindex/splitindex.java
+++ /dev/null
@@ -1,415 +0,0 @@
-/*
- * splitindex.java
- * Copyright (c) Markus Kohm, 2002
- *
- * $Id: splitindex.java,v 1.2 2003/01/05 15:05:46 mjk Exp $
- *
- * This file is part of the SplitIndex package
- *
- * This file can be redistributed and/or modified under the conditions
- * of the LaTeX Project Public License, either version 1.2 of this
- * license or (at your option) any later version.
- * The latest version of this license is in
- *       http://www.latex-project.org/lppl.txt
- * and version 1.2 or later is part of all distributions of LaTeX
- * version 1999/12/01 or later.
- *
- * You are not allowed to redistribute this file without all the
- * other files of the SplitIndex package
- */
-
-/*
-  I know, I should never write an application in a single static class 
-  like I do here. But I wanted the program at earch language to be one
-  file.
-*/
-
-import java.util.*;
-import java.util.regex.*;
-import java.io.*;
-
-public final class splitindex {
-    private static ArrayList MakeIndexArgs = new ArrayList();
-//     private static String Identify = "^(.*)\\\\UseIndex *\\{([^\\}]*)\\}(.*)$";
-    private static String Identify = "^(\\\\indexentry)\\[([^\\]]*)\\](.*)$";
-    private static String ResultIs = "$1$3";
-    private static String SuffixIs = "-$2";
-    private static int Verbose = 0;
-    private static String IDX = null;
-    private static String Jobname = null;
-    private static HashMap IDXwriters = new HashMap();
-
-    private static void ShowHelp() {
-	String nl = System.getProperty( "line.separator" );
-	ShowVersion();
-	System.out.println();
-	ShowUsage();
-	System.out.println(
-	    "Split a single raw index file into multiple raw index files." +nl+
-	    "Example: java splitindex foo.idx." +nl+
-	    nl+
-	    "Options:" +nl+
-	    "  -h, --help    " +
-	    "\tshow this help and terminate" +nl+
-	    "  -m, --makeindex PROGNAME" +nl+
-	    "\t\t\tcall PROGNAME instead of default `makeindex'." +nl+
-	    "  -i, --identify EXPRESSION" +nl+
-	    "\t\t\tuse regular EXPRESSION to match entries" +nl+
-	    "\t\t\t(see also option --resultis and --suffixis)." +nl+
-	    "\t\t\tDefault is \'" + Identify + "\'." +nl+
-	    "  -r, --resultis PATTERN" +nl+
-	    "\t\t\tcreate line to be written from PATTERN after matching" +nl+
-	    "\t\t\tlines (see also option --identify)." +nl+
-	    "\t\t\tDefault is \'" + ResultIs + "\'." +nl+
-	    "  -s, --suffixis PATTERN" +nl+
-	    "\t\t\tcreate suffix to be used from PATTERN after matching" +nl+
-	    "\t\t\tlines (see also option --identify)." +nl+
-	    "\t\t\tDefault is \'" + SuffixIs +"\'." +nl+
-	    "  -v, --verbose " +
-	    "\tbe more verbose" +nl+
-	    "\t\t\t(can be used multiple to increase verbosity)" +nl+
-	    "      --version " +
-	    "\tshow version and terminate"
-	    );
-	System.exit( 0 );
-    }
-
-    private static void ShowVersion() {
-	System.out.println( "splitindex.pl 0.1" );
-	System.out.println( "Copyright (c) 2002 Markus Kohm <kohm@gmx.de>" );
-    }
-
-    private static void ShowUsage( PrintStream out ) {
-	out.println( "Usage: java splitindex [OPTION]... RAWINDEXFILE [MAKEINDEXOPTION]..." );
-    }
-
-    private static void ShowUsage() {
-	ShowUsage( System.out );
-    }
-
-    private static void UsageError( String msg ) {
-	System.err.println( msg );
-	System.err.println( "Try `java splitindex --help' for more information." );
-	System.exit( 1 );
-    }
-
-    private static void ScanArguments(String[] args) {
-	String MakeIndex = "makeindex";
-	for (int i = 0; i < args.length; i++) {
-	    if ( args[i].charAt(0) == '-' ) {
-		// Option
-		if ( args[i].charAt(1) == '-' ) {
-		    // Long Option
-		    if ( args[i].substring(2).equals( "help" ) ) {
-			ShowHelp();
-			System.exit(0);
-		    } else if ( args[i].substring(2).equals( "version" ) ) {
-			ShowVersion();
-			System.exit(0);
-		    } else if ( args[i].substring(2).equals( "verbose" ) ) {
-			Verbose++;
-		    } else if ( args[i].substring(2).equals( "makeindex" ) ) {
-			if ( ++i >= args.length ) {
-			    UsageError( "Option makeindex requires an argument" );
-			}
-			MakeIndex = args[i];
-		    } else if ( ( args[i].length() >= 11 ) && 
-				( args[i].substring(2,11).equals( "makeindex=" ) ) ) {
-			MakeIndex = args[i].substring(12);
-		    } else if ( args[i].substring(2).equals( "identify" ) ) {
-			if ( ++i >= args.length ) {
-			    UsageError( "Option identify requires an argument" );
-			}
-		        Identify = args[i];
-		    } else if ( ( args[i].length() >= 10 ) && 
-				( args[i].substring(2,10).equals( "identify=" ) ) ) {
-			Identify = args[i].substring(11);
-		    } else if ( args[i].substring(2).equals( "resultis" ) ) {
-			if ( ++i >= args.length ) {
-			    UsageError( "Option resultis requires an argument" );
-			}
-			ResultIs = args[i];
-		    } else if ( ( args[i].length() >= 10 ) && 
-				( args[i].substring(2,10).equals( "resultis=" ) ) ) {
-			ResultIs = args[i].substring(11);
-		    } else if ( args[i].substring(2).equals( "suffixis" ) ) {
-			if ( ++i >= args.length ) {
-			    UsageError( "Option suffixis requires an argument" );
-			}
-			SuffixIs = args[i];
-		    } else if ( ( args[i].length() >= 10 ) && 
-				( args[i].substring(2,10).equals( "suffixis=" ) ) ) {
-			SuffixIs = args[i].substring(11);
-		    } else if ( args[i].equals( "--" ) ) {
-			while ( ++i < args.length ) {
-			    MakeIndexArgs.add( args[i] );
-			}
-		    } else {
-			UsageError( "Unknown option " + args[i].substring(2) );
-		    }
-		} else {
-		    // Short Option
-		    for ( int n = 1; n < args[i].length(); ) {
-			switch( args[i].charAt(n++) ) {
-			    case 'h':
-				ShowHelp();
-				System.exit(0);
-			    case 'm':
-				if ( n >= args[i].length() ) {
-				    if ( ++i >= args.length ) {
-					UsageError( "Option makeindex requires an argument" );
-				    } else {
-					MakeIndex = args[i];
-					n = args[i].length();
-				    }
-				} else {
-				    MakeIndex = args[i].substring( n );
-				    n = args[i].length();
-				}
-				break;
-			    case 'i':
-				if ( n >= args[i].length() ) {
-				    if ( ++i >= args.length ) {
-					UsageError( "Option identify requires an argument" );
-				    } else {
-					Identify = args[i];
-					n = args[i].length();
-				    }
-				} else {
-				    Identify = args[i].substring( n );
-				    n = args[i].length();
-				}
-				break;
-			    case 'r':
-				if ( n >= args[i].length() ) {
-				    if ( ++i >= args.length ) {
-					UsageError( "Option resultis requires an argument" );
-				    } else {
-				        ResultIs = args[i];
-					n = args[i].length();
-				    }
-				} else {
-				    ResultIs = args[i].substring( n );
-				    n = args[i].length();
-				}
-				break;
-			    case 's':
-				if ( n >= args[i].length() ) {
-				    if ( ++i >= args.length ) {
-					UsageError( "Option suffixis requires an argument" );
-				    } else {
-					SuffixIs = args[i];
-					n = args[i].length();
-				    }
-				} else {
-				    SuffixIs = args[i].substring( n );
-				    n = args[i].length();
-				}
-				break;
-			    case 'v':
-				Verbose++;
-				break;
-			}
-		    }
-		}
-	    } else {
-		MakeIndexArgs.add( args[i] );
-	    }
-	}
-
-	// Args --> IDX + Stringarray
-	if ( MakeIndexArgs.isEmpty() ) {
-	    UsageError( "missing raw index file" );
-	} else {
-	    IDX = (String)MakeIndexArgs.get(0);
-	    MakeIndexArgs.remove(0);
-	    MakeIndexArgs.add( 0, MakeIndex );
-	}
-
-	if ( IDX.endsWith( ".idx" ) ) {
-	    Jobname = IDX.substring( 0, IDX.length() - 4 );
-	} else {
-	    Jobname = IDX;
-	}
-    }
-
-    public static void main(String[] args) {
-	ScanArguments(args);
-
-	if ( Verbose > 0 ) {
-	    ShowVersion();
-	    System.out.println();
-	    if ( Verbose > 9 ) {
-		System.out.println( "Identify:  \"" + Identify + "\"" );
-		System.out.println( "ResultIs:  \"" + ResultIs + "\"" );
-		System.out.println( "SuffixIs:  \"" + SuffixIs + "\"" );
-		System.out.println( "IDX:       \"" + IDX + "\"" );
-		System.out.println( "Jobname:   \"" + Jobname + "\"" );
-		System.out.print( "MakeIndex:" );
-		for ( int i = 0; i < MakeIndexArgs.size(); i++ )
-		    System.out.print( " \"" + (String)MakeIndexArgs.get(i) + "\"" );
-		System.out.println();
-	    }
-	}
-
-	ProcessIDXFile();
-    }
-
-    private static void ProcessIDXFile() {
-	File fIDX = new File( IDX );
-	LineNumberReader rIDX = null;
-	boolean error = false;
-	if ( !fIDX.canRead() ) {
-	    if ( IDX.equals( Jobname ) ) {
-		IDX = IDX.concat( ".idx" );
-		fIDX = new File( IDX );
-		if ( !fIDX.canRead() ) {
-		    System.err.println( "Can read neither file " + Jobname +
-					" nor file " + IDX );
-		    System.exit( 1 );
-		}
-	    } else {
-		System.err.println( "Can't read file " + Jobname );
-		System.exit( 1 );
-	    }
-	}
-	
-	try {
-	    FileReader reader = new FileReader( fIDX );
-	    rIDX = new LineNumberReader( reader );
-	} catch ( FileNotFoundException ex ) {
-	    System.err.println( ex.getMessage() );
-	    System.exit( 1 );
-	}
-    
-	try {
-	    Pattern search = Pattern.compile( Identify );
-	    while ( rIDX.ready() ) {
-		String line = rIDX.readLine();
-		Matcher match = search.matcher( line );
-		String suffix, result;
-		
-		try {
- 		    if ( match.find() ) {
- 			suffix = match.replaceFirst( SuffixIs );
- 			result = match.replaceFirst( ResultIs );
- 		    } else {
- 			result = line;
- 			suffix = SuffixIs.replaceFirst( "\\$\\d", "idx" );
- 		    }
-		    WriteToIndex( Jobname + suffix + ".idx", result );
-		} catch ( Exception ex ) {
-		    System.err.println( ex.getMessage() );
-		    error = true;
-		    break;
-		}
-	    }
-
-	    if ( ! CloseAllIndex() )
-		error = true;
-	    else if ( ! CallAllMakeIndex() )
-		error = true;
-	} catch ( IOException ex ) {
-	    System.err.println( ex.getMessage() );
-	}
-
-	try {
-	    rIDX.close();
-	} catch ( IOException ex ) {
-	    System.err.println( ex.getMessage() );
-	    System.exit( 1 );
-	}
-
-	if ( error )
-	    System.exit( 1 );
-
-    }
-
-    static void WriteToIndex( String Name, String line ) 
-	throws FileNotFoundException, SecurityException {
-	PrintWriter fOut;
-	if ( ( fOut = (PrintWriter)IDXwriters.get( Name ) ) == null ) {
-	    if ( Verbose > 1 ) {
-		System.out.println( "New index file " + Name );
-	    }
-	    fOut = new PrintWriter( new FileOutputStream( Name ) );
-	    IDXwriters.put( Name, fOut );
-	}
-	fOut.println( line );
-    }
-
-    static boolean CloseAllIndex() {
-	Iterator all = IDXwriters.entrySet().iterator();
-	boolean retVal = true;
-	while ( all.hasNext() ) {
-	    Map.Entry entry = (Map.Entry)all.next();
-	    PrintWriter writer = (PrintWriter)entry.getValue();
-	    if ( Verbose > 1 ) {
-		System.out.println( "Close " + entry.getKey() );
-	    }
-	    writer.close();
-	    if ( writer.checkError() ) {
-		System.err.println( "Error writing " + entry.getKey() );
-		retVal = false;
-	    }
-	}
-	return retVal;
-    }
-
-    static boolean CallAllMakeIndex() {
-	Iterator all = IDXwriters.entrySet().iterator();
-	boolean retVal = true;
-	ArrayList processes = new ArrayList();
-	while ( all.hasNext() ) {
-	    Map.Entry entry = (Map.Entry)all.next();
-	    String name = (String)entry.getKey();
-	    try {
-		MakeIndexArgs.add(name);
-		String Args[] = new String[MakeIndexArgs.size()];
-		Args = (String[])MakeIndexArgs.toArray( Args );
-		MakeIndexArgs.remove(MakeIndexArgs.size()-1);
-		if ( Verbose > 1 ) {
-		    System.out.print( "MakeIndex:" );
-		    for ( int i = 0; i < Args.length; i++ )
-			System.out.print( " \"" + Args[i] + "\"" );
-		    System.out.println();
-		}
-		processes.add(Runtime.getRuntime().exec( Args ));
-	    } catch ( Exception ex ) {
-		System.err.println( ex.getMessage() );
-		retVal = false;
-	    }
-	}
-
-	for ( int i = 0; i < processes.size(); i++ ) {
-	    Process p = (Process)processes.get( i );
-	    InputStream out = p.getInputStream();
-	    byte[] buffer = new byte[1024];
-	    for ( boolean oncemore = true; oncemore; ) {
-		oncemore = false;
-		try {
-		    while ( out.available() > 0 ) {
-			out.read( buffer );
-			System.out.print( new String(buffer) );
-		    }
-		    for ( out = p.getErrorStream();
-			  out.available() > 0; ) {
-			out.read( buffer );
-			System.err.print( new String( buffer ) );
-		    }
-		} catch ( Exception ex ) {
-		    System.err.println( ex.getMessage() );
-		    retVal = false;
-		}
-		try {
-		    if ( p.exitValue() != 0 )
-			retVal = false;
-		} catch ( IllegalThreadStateException ex ) {
-		    oncemore = true;
-		}
-	    }
-	}
-	
-	return retVal;
-    }
-}
diff --git a/Master/texmf-dist/doc/latex/splitindex/splitindex.pl b/Master/texmf-dist/doc/latex/splitindex/splitindex.pl
deleted file mode 100644
index 378fb25e68c..00000000000
--- a/Master/texmf-dist/doc/latex/splitindex/splitindex.pl
+++ /dev/null
@@ -1,186 +0,0 @@
-#! /usr/bin/perl -w
-eval 'exec perl -S $0 ${1+"$@"}'
-    if 0; #$running_under_some_shell
-
-# ======================================================================
-# splitindex.pl
-# Copyright (c) Markus Kohm, 2002
-#
-# $Id: splitindex.pl,v 1.5 2002/11/05 10:54:27 mjk Exp $
-#
-# This file is part of the SplitIndex package
-#
-# This file can be redistributed and/or modified under the conditions
-# of the LaTeX Project Public License, either version 1.2 of this
-# license or (at your option) any later version.
-# The latest version of this license is in
-#       http://www.latex-project.org/lppl.txt
-# and version 1.2 or later is part of all distributions of LaTeX
-# version 1999/12/01 or later.
-#
-# You are not allowed to redistribute this file without all the
-# other files of the SplitIndex package
-# ======================================================================
-
-use strict;
-use Getopt::Long;
-
-my $makeindex = "makeindex";
-# my $identify = "^(.*)\\\\UseIndex *\\{([^\\}]*)\\}(.*)\$";
-my $identify = "^(\\\\indexentry)\\[([^]]*)\\](.*)\$";
-my $suffixis = "-\$2";
-my $lineis = "\$1\$3";
-my $verbose = 0;   # option verbose with default value 
-my $result = GetOptions(
-			'help' => sub { help() },
-			'makeindex=s' => \$makeindex,
-			'identify=s' => \$identify,
-			'resultis=s' => \$lineis,
-			'suffixis=s' => \$suffixis,
-			'verbose|v+' => \$verbose,
-			 'version' => sub { version(); exit 0; } 
-			);
-
-usage("missing raw index file") if ( $#ARGV < 0 );
-
-my $indexinput = shift;
-my $jobname    = ( $indexinput =~ /^(.*)\.idx$/ ) ? $1 : $indexinput;
-
-my %idxfile;
-my %linesatidxfile;
-
-version() if ($verbose > 0);
-
-if ( !( open (IDX,"<$indexinput") ) ) {
-    if ( $indexinput ne "$jobname.idx" ) {
-	open (IDX,"<$jobname.idx") ||
-	    die "Cannot read raw index file $indexinput nor $jobname.idx";
-	$indexinput = "$jobname.idx";
-    } else {
-	die "Cannot read raw index file $indexinput";
-    }
-}
-
-while (<IDX>) {
-    my $line;
-    my $suffix;
-    if ( /$identify/ ) {
-	my $eval = "\$line = \"$lineis\n\"";
-	eval $eval;
-	$eval = "\$suffix = \"$suffixis\"";
-	eval $eval;
-    } else {
-	$line = $_;
-	$suffix = "";
-	$suffix .= "$1" if ( $suffixis =~ /^(.*)\$/ );
-	$suffix .= "idx";
-	$suffix .= "$1" if ( $suffixis =~ /\$[123456789](.*)$/ );
-    }
-    while ( $suffix =~ /(^[^,]+)(.*)$/ ) {
-	$suffix = $2;
-	writetoidx ($1,$line);
-    }
-}
-
-closeallind();
-
-close(IDX);
-
-generateallind(@ARGV);
-
-exit 0;
-
-sub generateallind {
-    my $name;
-    my $file;
-    
-    if ( $makeindex ne "" ) {
-	while (($name,$file) = each %idxfile) {
-	    system( "$makeindex @ARGV $jobname$name.idx" );
-	}
-    }
-}
-
-sub closeallind {
-    my $name;
-    my $file;
-    my $lines;
-    while (($name,$file) = each %idxfile) {
-	print "Close $jobname$name.idx\n" 
-	    if ( $verbose > 1 );
-	close( $file );
-	$idxfile{$name}=0;
-    }
-    if ( $verbose > 0 ) {
-	print "\n";
-	while (($name,$lines) = each %linesatidxfile) {
-	    print "$jobname$name.idx with $lines lines\n";
-	}
-    }
-}
-
-sub writetoidx {
-    my $suffix = $_[0];
-    my $line = $_[1];
-    my $file = $idxfile{$suffix};
-    if ( ! $file ) {
-	open ( $file, ">$jobname$suffix.idx" ) ||
-	    die "Cannot write to file $jobname$suffix.idx";
-	$idxfile{$suffix} = $file;
-	$linesatidxfile{$suffix} = 0;
-	print( "New index file $jobname$suffix.idx\n" )
-	    if ( $verbose > 1 );
-    }
-    print ($file $line);
-    $linesatidxfile{$suffix}++;
-}
-
-sub help {
-    version();
-    print "\n";
-    usage();
-    print  	
-	"Split a single raw index file into multiple raw index files.\n".
-	"Example: splitindex.pl foo.idx.\n".
-	"\n".
-	"Options:\n" .
-	"  -h, --help    " .
-	"\tshow this help and terminate\n" .
-	"  -m, --makeindex PROGNAME\n" .
-	"\t\t\tcall PROGNAME instead of default \`makeindex\'.\n" .
-	"  -i, --identify EXPRESSION\n" .
-	"\t\t\tuse regular EXPRESSION to match entries\n".
-	"\t\t\t(see also option --resultis and --suffixis).\n".
-	"\t\t\tDefault is \'$identify\'.\n".
-	"  -r, --resultis PATTERN\n" .
-	"\t\t\tcreate line to be written from PATTERN after matching\n".
-	"\t\t\tlines (see also option --identify).\n".
-	"\t\t\tDefault is \'$lineis\'.\n".
-	"  -s, --suffixis PATTERN\n" .
-	"\t\t\tcreate suffix to be used from PATTERN after matching\n".
-	"\t\t\tlines (see also option --identify).\n".
-	"\t\t\tDefault is \'$suffixis\'.\n".
-	"  -v, --verbose " .
-	"\tbe more verbose\n".
-	"\t\t\t(can be used multiple to increase verbosity)\n" .
-	"      --version " .
-	"\tshow version and terminate\n";
-    exit 0;
-}
-
-sub version {
-    print "splitindex.pl 0.1\n" .
-	"Copyright (c) 2002 Markus Kohm \<kohm\@gmx.de\>\n";
-}
-
-sub usage {
-    my $text = "Usage: splitindex.pl [OPTION]... RAWINDEXFILE [MAKEINDEXOPTION]...\n";
-    if ( $#_ >= 0 ) {
-	print STDERR @_;
-	print STDERR "\n$text";
-	print STDERR "Try \`splitindex.pl --help\' for more information.\n";
-	exit 1;
-    } else {
-	print $text;
-    }
-}
diff --git a/Master/texmf-dist/source/latex/splitindex/splitidx.dtx b/Master/texmf-dist/source/latex/splitindex/splitidx.dtx
deleted file mode 100644
index 6b279faace6..00000000000
--- a/Master/texmf-dist/source/latex/splitindex/splitidx.dtx
+++ /dev/null
@@ -1,1505 +0,0 @@
-% \CheckSum{555}
-% \iffalse
-% ======================================================================
-% splitindex.dtx
-% Copyright (c) Markus Kohm, 2002-2006
-%
-% $Id: splitidx.dtx,v 1.17 2006/07/29 07:00:46 mjk Exp $
-%
-% This file is part of the `SplitIndex bundle'.
-% ---------------------------------------------
-%
-% This file can be redistributed and/or modified under the conditions
-% of the LaTeX Project Public License, either version 1.3a of this
-% license or (at your option) any later version.
-% The latest version of this license is in
-%       http://www.latex-project.org/lppl.txt
-% and version 1.3a or later is part of all distributions of LaTeX
-% version 2005/12/01 or later.
-%
-% This work has status 'maintained'.
-% Maintainer is Markus Kohm <komascript@gmx.info>.
-%
-% You are not allowed to redistribute this file without all the
-% other files of the `SplitIndex bundle'. The list of all files
-% belonging to the `SplitIndex bundle' is given in the file
-% `manifest.txt'.
-% ======================================================================
-%
-%<*dtx>
-% \fi
-\ProvidesFile{splitidx.dtx}[%
-% \iffalse
-%</dtx>
-%<driver>\ProvidesFile{splitidx.drv}[%
-%<package>\ProvidesPackage{splitidx}[%
-% \fi
- 2006/07/30 v1.0 multiple indices for LaTeX]
-% \iffalse
-%<*driver>
-\documentclass{ltxdoc}
-\usepackage{color,alltt}
-\newcommand*{\Prompt}{{\color{green}\textbf{\$}}}
-\newcommand*{\Package}{}\let\Package\textsf
-\newcommand*{\Class}{}\let\Class\textsf
-\newcommand*{\Program}{}\let\Program\textsf
-\newcommand*{\File}{}\let\File\texttt
-\newcommand*{\Cmdline}{}\let\Cmdline\texttt
-\providecommand*{\url}{\texttt}
-\CodelineIndex 
-\RecordChanges
-\EnableCrossrefs
-\GetFileInfo{splitidx.dtx} 
-\title{Creating More Than One Index Using \Package{splitidx} And
-  \Program{SplitIndex}\thanks{This file is version \fileversion{} of file
-    \File{\filename}. Nevertheless it should be stable.}}
-\author{Markus Kohm\thanks{Markus Kohm \textless komascript\textcircled{\tiny at}gmx.info\textgreater}}
-\date{\filedate}
-\begin{document}
-\maketitle
-\begin{abstract}
-  With \Package{makeidx} there's a standard package at \LaTeX{} to create
-  one index to each document. But some times more than one index is
-  needed. There are different packages with different solutions and different
-  problems to achieve multiple indices. Here is one more. 
-\end{abstract}
-\tableofcontents
-\DocInput{splitidx.dtx}
-\end{document}
-%</driver>
-% \fi
-%
-% \DoNotIndex{\DeclareOption,\AtEndOfPackage,\renewcommand,\g@addto@macro}
-% \DoNotIndex{\renewcommand,\ProcessOptions,\relax,\newcommand,\emph}
-% \DoNotIndex{\providecommand,\@bsphack,\@esphack,\@sanitize,\typeout}
-% \DoNotIndex{\begingroup,\endgroup,\jobname,\ifx,\else,\fi,\expandafter}
-% \DoNotIndex{\csname,\endcsname,\protected@write,\AtBeginDocument}
-% \DoNotIndex{\ifHy@hyperindex,\@indexfile,\thepage,\Hy@temp@A}
-% \DoNotIndex{\HyInd@ParenLeft,\HyInd@ParenRight,\string,\@ifstar,\@input@}
-% \DoNotIndex{\@ifnextchar,\edef,\let,\@empty,\@for,\@tempa,\xdef,\def}
-% \DoNotIndex{\catcode,\lowercase,\do,\@ifundefined,\PackageError}
-% \DoNotIndex{\MessageBreak,\gdef,\@namedef,\setcounter,\@gobble.\-,\\}
-% \DoNotIndex{\@onlypreamble,\@tempb,\@wrindex,\immediate,\newif,\newwrite}
-% \DoNotIndex{\openout,\@gobble}
-%
-% \section{Introduction}
-%
-% First of all you have to know how index generation normally would be
-% done. Read \cite{makeindex} and e.g. \cite{makeindexmanual} if you
-% don't.
-%
-% Generally you load a package e.g. \Package{makeidx}, put \cs{index} commands
-% into your document, which are written as \cs{indexentry} commands to the raw
-% index file ``\File{\cs{jobname}.idx}''. Then you call an \emph{index
-% processor} like \Program{MakeIndex} or \Program{xindy}, which generates a
-% sorted index file ``\File{\cs{jobname}.ind}''. This will be included with a
-% command like \cs{printindex} at the end of your document.
-%
-% Most packages, which allows more than one index, open more than one raw
-% index file. Each of these files costs a write file handle. \TeX{} has only
-% 16 of these. \LaTeX{} itself needs some of these for e.g. \File{.aux},
-% \File{.toc}, \File{.lot}, \File{.lof} and maybe other more or less temporary
-% files depends on what you are doing. With package option \texttt{split}
-% package \Package{splitidx} works like those packages.
-%
-% Without option \texttt{split} the \Package{splitidx} package needs only one
-% raw index file like \Package{makeidx} would. This one raw index files
-% contains all the index entries for all the indices you defined. But to do so
-% \Package{splitidx} and the index processor need help. Before calling the
-% index processor the one raw index file has to be splitted into multiple raw
-% index files. Each of these contains the index entries of one index. This
-% splitting can be done with the \Program{splitindex} program.
-%
-% There is not only one \Program{SplitIndex} program, there are
-% \Program{SplitIndex} programs in different programming languages:
-% \begin{description}
-% \item[\Program{splitindex.pl}] This is written in perl. You need a perl
-%   interpreter to run it. If you are a Unix user, you have a perl interpreter
-%   and you can call \Program{splitindex.pl} like you would call a binary
-%   program or a shell script from your shell. This is the reference
-%   implementation. I prefers to use this\,---\,because it was the first, the
-%   easiest and the shortest to be written.
-% \item[\Program{splitindex.jar}] This is written using Sun Java 1.4.1. You
-%   can find the source at \File{splitindex.java}. I wrote it, because Java is
-%   everywhere and may be installed everywhere and a lot of people are able to
-%   understand Java source files. But if you don't have Sun Java 1.4 the start
-%   of this program will result in errors\,---\,e.g. 
-%   \begin{quote}
-%     \texttt{Exception in thread "main" java.util.zip.ZipException: No such
-%     file or directory}
-%   \end{quote}
-%   if you try to start it with Sun Java 1.3.
-% \item[\Program{splitindex-Linux-i386}] This is a Linux-i386-ELF binary from
-%   the C source file \File{splitindex.c}. It will be renamed to
-%   \Program{splitindex} during installation, if you are using Linux-i386. At
-%   section~\ref{C} you find a introduction in how to compile
-%   \File{splitindex.c} yourself e.g. if you are using Linux-PPC. I wrote the
-%   C source, because a lot of people like to have a binary and most software
-%   authors understand C and some people want fast binaries instead of slow
-%   Java bit code\,---\,even, if the Java program is fast enough.
-% \item[\Program{splitindex-OpenBSD-i386}] This is a OpenBSD-i386 binary from
-%   the C source file \File{splitindex.c}. It will be renamed to
-%   \Program{splitindex} during installation, if you are using
-%   OpenBSD-i386. It is almost the same like
-%   \Program{splitindex-Linux-i386}\,---\,but it doesn't understand long
-%   option names.
-% \item[\Program{splitindex.exe}] This is a CygWin binary from the C source
-%   file \File{splitindex.c}. A CygWin binary is a Windows (Win32) binary
-%   using the CygWin DLL. At section~\ref{C} you find a introduction in how to
-%   use a CygWin binary without installing a whole CygWin
-%   environment\,---\,nevertheless it is nice to have a almost complete
-%   CygWin.
-% \item[\Program{splitindex.tex}] This is a \TeX{} version of the
-%   program. Yes, you are right: it is a program written in \TeX{}. It has not
-%   the whole functionality of the other programs (see section~\ref{TeX}), but
-%   it is system independent and you don't need to install a other program
-%   like perl or Sun Java 1.4. It is not impossible to fix all the
-%   disadvantages of this program\,---\,but it isn't easy and much more work
-%   than all the other program.
-% \end{description}
-% Without the \TeX{} version of \Program{splitindex} all of these programs are
-% also able to call the index processor after creating the raw index files.
-%
-% And where is the lisp, the smalltalk, the prolog, the \dots{} version of
-% \Program{splitindex}? Hey, four languages are enough for me! If you need one
-% more, write it!
-%
-%
-% \section{Using the \Package{splitidx} package}
-% \label{package}
-%
-%
-% \subsection{Generating a raw index}
-%
-% You may use \Package{splitidx} as a drop-in-replacement for
-% \Package{makeidx}. If you do so, you just have to replace:
-% \begin{verbatim}
-%   \usepackage{makeidx}
-% \end{verbatim}\vspace{-\baselineskip}
-% by
-% \begin{verbatim}
-%   \usepackage{splitidx}
-% \end{verbatim}\vspace{-\baselineskip}
-%
-% \DescribeMacro{\makeindex}
-% To activate index generation you may use \cs{makeindex}, which is declared
-% by the \LaTeX{} kernel.
-% You may also load the package with option
-% \texttt{makeindex}:
-% \begin{verbatim}
-%   \usepackage[makeindex]{splitidx}
-% \end{verbatim}\vspace{-\baselineskip}
-% which is almost the same like:
-% \begin{verbatim}
-%   \usepackage{splitidx}\makeindex
-% \end{verbatim}\vspace{-\baselineskip}
-%
-% \DescribeMacro{\index}
-% After loading the package you may use command \cs{index}. You can find the
-% description of the argument and features of this command at
-% \cite{makeindex}. The \Program{splitindex} programs (see
-% section~\ref{program}) put all index entries, which are produced with
-% \cs{index} to the index with shortcut ``\texttt{idx}''.
-%
-% \DescribeMacro{\sindex}
-% The \Package{splitidx} package also defines the command \cs{sindex} with the
-% syntax:
-% \begin{quote}
-%   \cs{sindex}\oarg{shortcut}\marg{index-entry}
-% \end{quote}
-% to be used to put an index
-% entry into the index with the optional given shortcut. If you omit optional
-% \meta{shortcut} the shortcut ``\texttt{idx}'' will be used. 
-% If you use \cs{sindex} you need to split the raw index file into several raw
-% index  files, before generating the index with an index processor like
-% \Program{MakeIndex}. See section~\ref{program} for more information about
-% splitting the raw index file.
-%
-% The shortcut is used not only to distinguish between the different
-% indices. It is also used as part of the name of the raw index file generated
-% by a \Program{splitindex} program (see section~\ref{program}) and the
-% corresponding index file generated by an index processor like
-% \Program{MakeIndex} (see \cite{makeindexmanual}). So you should not use
-% characters or symbols at \meta{shortcut} which are not allowed at
-% filenames. At file systems, which are not case sensitive, you should not mix
-% upper and lower case letters. Best would be, if you'll use only lower case
-% letters.
-%
-% Under some unfortunate circumstances you may be forced to put all your index
-% entries back to one index. The easiest way to do this without changing all
-% \cs{sindex} commands into \cs{index} commands is the package option
-% \texttt{allatone}. If you load the package with:
-% \begin{verbatim}
-%   \usepackage[allatone]{splitidx}
-% \end{verbatim}\vspace{-\baselineskip}
-% or
-% \begin{verbatim}
-%   \usepackage[allatone,makeindex]{splitidx}
-% \end{verbatim}\vspace{-\baselineskip}
-% \cs{sindex}\oarg{shortcut}\marg{indexentry} will result in
-% \cs{index}\marg{indexentry}.
-%
-% If you like, you may also declare that \cs{index} should be the same
-% like command \cs{sindex}. In this case, you may use package
-% option \texttt{useindex}, e.g.:
-% \begin{verbatim}
-%   \usepackage[useindex]{splitidx}
-% \end{verbatim}\vspace{-\baselineskip}
-% This may be usefull using packages like \textsf{jurabib} that expects
-% \cs{index} to be the index command.
-%
-% \emph{Note: Currently only one of the options \texttt{allatone} and
-%   \texttt{useindex} can be used at same time. If you are using both
-%   \texttt{useindex} will be disabled! This may result in many error
-%   messages!}
-%
-%
-% \subsection{Printing an index}
-%
-% \DescribeMacro{\newindex}
-% If you want to generate more than one index without shortcut, you should
-% declare this using \cs{newindex} with syntax:
-% \begin{quote}
-%   \cs{newindex}\oarg{index name}\marg{shortcut}.
-% \end{quote}
-% The mandatory argument \meta{shortcut} is used to distinguish the different
-% indices. See description of \cs{sindex} for more information about this. The
-% optional argument \meta{index name} is the name of the index. This is also
-% the default heading of this index used from \cs{printindex} and
-% \cs{printsubindex}. If you omit \meta{index name} the shortcut will be used
-% as index name.
-%
-% Some people do not like to call an extra program like
-% \Program{splitindex}. For those the package option \texttt{split} has been
-% implemented. With this option \Package{splitidx} opens a new file for each
-% index, which is declared using \cs{newindex}. If you are using this option,
-% you have to declare all indices you want to use at the preamble of your
-% document. This also uses the default \File{idx} file for index entries to
-% index with shortcut \texttt{idx}. The number of index files, you can open is
-% limited, if you are using this option. This is because of the limitation of
-% output streams \TeX{} provides. With this option not only \cs{newindex} may
-% result in an error but also \cs{tableofcontents}, \cs{listoffigures},
-% \cs{listoftables} and each other command, which allocates an output stream.
-%
-% Some people do not like to write \cs{sindex[foo]}\marg{entry}. They want to
-% write \cs{foo}\marg{entry}. For those of you the package option
-% `\texttt{idxcommands}' has been implemented. This defines a command with the
-% name of the \meta{shortcut} for each declared index. If you are using this
-% option, you'll get an error, if a shortcut is the name of an already defined
-% command. And if you are using this option, the characters of the shortcuts
-% must be letters.
-%
-% \DescribeMacro{\newprotectedindex}
-% Using standard index package \textsf{makeidx} the \LaTeX{} kernel command
-% \cs{index} may expand the argument of \cs{index}. The kernel uses
-% \cs{@santize} to avoid this in some cases. But this fails, if the argument
-% was already read e.g. by another macro. So if you define a macro, that reads
-% an argument, does something with the argument and write it to the index this
-% may expand the argument. Try following:
-% \begin{verbatim}
-%  \documentclass{article}
-%  \usepackage{ngerman}
-%  \usepackage{makeidx}\makeindex
-%  \newcommand*{\Test}[1]{#1\index{#1}}
-%  \begin{document}
-%  \Test{"Anderung}
-%  "Anderung\index{"Anderung}
-%  \end{document}
-% \end{verbatim}\vspace{-\baselineskip}
-% This will result in two entries at the \texttt{.idx} file:
-% \begin{verbatim}
-%   \indexentry{\active@dq  \dq@prtct{A}nderung}{1}
-%   \indexentry{"Anderung}{1}
-% \end{verbatim}\vspace{-\baselineskip}
-% The first one is something expanded that is not wanted. Package
-% \textsf{splitindx} behaves same by default. But if you are using
-% \cs{newprotectedindex} to define a new index, it uses a trick so avoid
-% expansion. If all indices should behave like this, you may simply use
-% package option \texttt{protected}.
-% \begin{verbatim}
-%  \documentclass{article}
-%  \usepackage{ngerman}
-%  \usepackage[protected,useindex,makeindex]{makeidx}
-%  \newcommand*{\Test}[1]{#1\index{#1}}
-%  \begin{document}
-%  \Test{"Anderung}
-%  "Anderung\index{"Anderung}
-%  \end{document}
-% \end{verbatim}\vspace{-\baselineskip}
-% Will result in two entries at the \texttt{.idx} file:
-% \begin{verbatim}
-%   \indexentry{"Anderung}{1}
-%   \indexentry{"Anderung}{1}
-% \end{verbatim}\vspace{-\baselineskip}
-% If you want to know more about the trick, see command
-% \cs{@onelevel@sanitize} at the \LaTeX{} kernel documentation,
-% \texttt{source2e}.
-%
-%
-% \DescribeMacro{\printindex}
-% \changes{v0.2a}{2003/01/05}{fix of documentation bug}
-% The \cs{printindex} command is used to print one index or all indices, which
-% are declared using \cs{newindex}. How it behaves depends on the syntax you
-% are using.
-%
-% With syntax
-% \begin{quote}
-%   \cs{printindex}\oarg{shortcut}\oarg{index name}
-% \end{quote}
-% the index file with the optional shortcut will be loaded and titled with
-% optional given index name. If \meta{index name} is omitted the default index
-% name declared with \cs{newindex} will be used. 
-%
-% If the both optional arguments, \meta{shortcut} and \meta{index name}, are
-% omitted and you are using simply
-% \begin{quote}
-%   \cs{printindex}
-% \end{quote}
-% it behaves like \cs{printindex} from package \Package{makeidx}. You should
-% not use this, if you are using \cs{sindex} with optional argument.
-%
-% You may also print all indices, which were declared using \cs{newindex}. Use
-% syntax:
-% \begin{quote}
-%   \cs{printindex*}
-% \end{quote}
-% to do so. The indices will be printed in the order you declared them using
-% \cs{newindex}.
-%
-% \cs{printindex} uses the default index output of the class and the
-% index processor you are using. Most this will be \texttt{theindex}
-% environment, but it needn't. But \cs{printindex} will fail to set the name
-% of the index if \cs{indexname} isn't use to print the name of the
-% index. This would be a failure of the class not of the \Package{splitidx}
-% package. I don't know any class with this failure.
-%
-%
-% \DescribeMacro{\printsubindex}
-% The \cs{printsubindex} command behaves like \cs{printindex} with same syntax
-% but it does some redefinitions before printing the index, to:
-% \begin{itemize}
-% \item use \cs{section} instead of \cs{chapter} level at classes, which have
-%   \cs{chapter} and \cs{subsection} instead of \cs{section} level at classes,
-%   which haven't \cs{chapter},
-% \item deactivate \cs{onecolumn}, \cs{twocolumn} and \cs{clearpage},
-%   \cs{cleardoublepage} to start a new page at each index,
-% \item change the mark mechanism not to use \cs{markboth} but \cs{markright}
-%   for setting up the running headline.
-% \end{itemize}
-% Using this you can print multiple indices at one chapter, if you are using a
-% class with \cs{chapter}, or at one section, if you are using a class without
-% \cs{chapter}.
-%
-%
-% \DescribeMacro{\setindexpreamble}
-% If you are using a KOMA-Script class, you'll know this command. Package
-% \Package{splitidx} redefines this command to syntax:
-% \begin{quote}
-%   \cs{setindexpreamble}\oarg{shortcut}\marg{preamble}
-% \end{quote}
-% So you can define a preamble for each index. Note: Package
-% \Package{splitidx} doesn't print the preamble itself. But it lets
-% \cs{index@preamble} to be the preamble of the index with the actual
-% shortcut, before printing an index using \cs{printindex} or
-% \cs{printsubindex}.
-%
-%
-% \DescribeMacro{\useindexpreamble}
-% If you are defining your own index environment or if you extend
-% \texttt{theindex} environment using e.g. \cs{extendtheindex}, you may use
-% \cs{useindexpreamble} with syntax:
-% \begin{quote}
-%   \cs{useindexpreamble}\oarg{additional commands}
-% \end{quote}
-% to print the preamble of the actual index, which was set using
-% \cs{setindexpreamble}. This is not related to the KOMA-Script classes, it
-% can also be used e.g. with the standard classes. The commands from optional
-% argument \meta{additional commands} are only used, if the preamble is
-% defined and not empty.
-%
-%
-% \DescribeMacro{\indexshortcut}
-% The macro \cs{indexshortcut} is only defined at \cs{printindex} and
-% \cs{printsubindex}. It expands to the shortcut of the actual index. So you
-% may use it at your own index environment or extending the \texttt{theindex}
-% environment using e.g. \cs{extendtheindex}.
-%
-%
-% \DescribeMacro{\extendtheindex}
-% Most classes define the environment \texttt{theindex} to be used for
-% printing the index. Using \cs{extendtheindex} with syntax
-% \begin{quote}
-%   \cs{extendtheindex}\marg{before begin}\marg{after begin}^^A
-%   \marg{before end}\mbox{\marg{after end}}
-% \end{quote}
-% you may extend this command. The commands from \meta{before begin} are used
-% at \cs{begin\{theindex\}} just after starting the group but before starting
-% the index. The commands from \meta{after begin} are used after
-% \cs{begin\{theindex\}}. The commands from \meta{before end} are used before
-% \cs{end\{theindex\}}. The commands from \meta{after end} are used at
-% \cs{end\{theindex\}} just after ending the index but just before ending the
-% group.
-%
-%
-% \subsection{Examples}
-% \label{examples}
-%
-% Let's see how you may get more than one index. The text of the example is
-% silly, so don't think about the text, think about the usage of
-% \Package{splitidx}.
-%
-% \begin{flushleft}\ttfamily
-% \cs{documentclass}\{article\} \percentchar \textit{ We use \Class{article}
-%   class \dots}\\
-% \cs{usepackage}\{splitidx\} \percentchar \textit{ \dots\ and the
-%   \Package{splitidx} package}\\
-% \cs{makeindex} \percentchar \textit{ And we want index generation}\\
-% ~\\
-% \percentchar \textit{ We define 4 indices:}\\
-% \cs{newindex}[General Index]\{idx\} \percentchar \textit{ Name and shortcut
-%   of the 1st index}\\
-% \cs{newindex}[Index of Animals]\{ani\} \percentchar \textit{ \dots\ 2nd
-%   index}\\
-% \cs{newindex}[Index of Fruits]\{fru\} \percentchar \textit{ \dots\ 3rd
-%   index}\\ 
-% \cs{newindex}[Index of Vegetables]\{veg\} \percentchar \textit{ \dots\ 4th
-%   index}\\
-% ~\\
-% \cs{begin}\{document\}\\
-% Apples\cs{sindex}[fru]\{apple\} \percentchar \textit{ an entry to
-%   }fru\texttt{ index}\\
-% and oranges\cs{sindex}[fru]\{orange\} \percentchar \textit{ an entry to
-%   }fru\texttt{ index}\\
-% are fruits\cs{sindex}\{fruits\}.\ \percentchar \textit{ an implicit entry
-% to }idx\textit{ index}\\
-% Tomatoes\cs{sindex}[veg]\{tomato\} \percentchar \textit{ an entry to
-% }veg\textit{ index}\\
-% are\\
-% vegetables\cs{index}\{vegetables\}.\ \percentchar \textit{ an implicit
-%   entry to }idx\textit{ index}\\
-% Cats\cs{sindex}[ani]\{cat\} \percentchar \textit{ an entry to
-% }ani\textit{ index}\\
-% are animals\cs{sindex}[idx]\{animals\}.\ \percentchar \textit{ an explicite
-%   entry to }idx\textit{ index}\\
-% ~\\
-% \cs{printindex*} \percentchar \textit{ print all indices}\\
-% \cs{end}\{document\}
-% \end{flushleft}
-% After processing the file above with \LaTeX{} you'll get a raw index file
-% with following contents:
-% \begin{verbatim}
-% \indexentry[fru]{apple}{1}
-% \indexentry[fru]{orange}{1}
-% \indexentry{fruits}{1}
-% \indexentry[veg]{tomato}{1}
-% \indexentry{vegetables}{1}
-% \indexentry[ani]{cat}{1}
-% \indexentry[idx]{animals}{1}
-% \end{verbatim}\vspace{-\baselineskip}
-% Section~\ref{program} shows, how you can process this raw index file to get
-% several raw index files and several index files. You will get four index
-% files. Each of it will be input with the single \cs{printindex*} command at
-% the example above. Each will produce a single section starting on an new
-% page with one column section headings ``General Index'', ``Index of
-% Animals'', ``Index of Fruits'' and ``Index of Vegetables''. Each index is
-% printed in twocolumn mode.
-%
-% Maybe you would like to have all indices being subsections at one
-% section. You can do this, if you replace the \cs{printindex*} command at the
-% example above by the following:
-% \begin{flushleft}\ttfamily
-% \cs{twocolumn}[\percentchar\textit{ set the title onecolumn}\\
-% \ \cs{section*}\{Indices\} \percentchar\textit{ the section with the
-%   indices}\percentchar\\
-% \ \cs{markboth}\{Indices\}\{Indices\} \percentchar\textit{ setting up the
-%   running headline }\percentchar\\
-% ]\percentchar\textit{ but the indices twocolumn}\\
-% \cs{printsubindex*} \percentchar\textit{ print all indices}
-% \end{flushleft}
-% Note that I've used \cs{printsubindex*} instead of \cs{printindex*} at this
-% modification. You don't need to setup the running headline, if you are using
-% page style \texttt{plain}, which is default at \Class{article} class. But if
-% you're using page style \texttt{headings} you should do this, if you are
-% using \cs{section*}. If you are using a KOMA-Script class, you can use
-% \cs{addsec} or \cs{addsec*} instead of \cs{section*} to not need manual
-% updating of the running headline.
-%
-% Maybe you want the general index to be the section, while the other indices
-% should be subsections of the general index. Maybe you'll try to replace the
-% above by the following:
-% \begin{flushleft}\ttfamily
-% \percentchar\textit{\#\#\#\#\# This will not do the thing you wanted!
-%   \#\#\#\#\#}\\
-% \cs{printindex}[idx] \percentchar\textit{ print index }idx\textit{ as
-%   section}\\
-% \cs{printsubindex}[ani] \percentchar\textit{ print index }ani\textit{ as
-%   subsection}\\
-% \cs{printsubindex}[fru] \percentchar\textit{ print index }fru\textit{ as
-%   subsection}\\
-% \cs{printsubindex}[veg] \percentchar\textit{ print index }veg\textit{ as
-%   subsection}\\
-% \end{flushleft}
-% But this will result in a twocolumn section with general index \texttt{idx}
-% and three onecolumn subsections with the other indices and a page break
-% after the general index. Why? At the end of \texttt{theindex} environment of
-% \cs{printindex} the onecolumn mode, which was valid before \cs{printindex}
-% will be restored. If twocolumn mode was valid before \cs{printindex} a
-% \cs{clearpage} command will be included at the end of \texttt{theindex}.
-% So what's the solution? Remembering the \cs{extendtheindex} command you can
-% write:
-% \begin{flushleft}\ttfamily
-% \cs{begingroup} \percentchar\textit{ hold following extension local to this
-%   group}\\
-% \ \cs{extendtheindex}\percentchar \textit{ some changes of
-%   }theindex\textit{ environment}\\
-% \ \ \{\}\percentchar\textit{ no change before beginning}\\
-% \ \ \{\}\percentchar\textit{ no change after beginning}\\
-% \ \ \{\cs{let}\cs{onecolumn}\cs{relax} \percentchar\textit{ deactivate
-%   \cs{onecolumn} before ending}\\
-% \ \ \ \cs{let}\cs{clearpage}\cs{relax} \percentchar\textit{ deactivate
-%   \cs{clearpage} before ending}\\
-% \ \ \}\percentchar \textit{ changes before ending}\\ 
-% \ \ \{\}\percentchar\textit{ no change after ending}\\
-% \ \cs{printindex}[idx] \percentchar\textit{ print index }idx\textit{ as
-%   section}\\
-% \cs{endgroup} \percentchar\textit{ end group with extended }theindex\textit{
-% environment}\\
-% \cs{printsubindex}[ani] \percentchar\textit{ print index }ani\textit{ as
-%   subsection}\\
-% \cs{printsubindex}[fru] \percentchar\textit{ print index }fru\textit{ as
-%   subsection}\\
-% \cs{printsubindex}[veg] \percentchar\textit{ print index }veg\textit{ as
-%   subsection}\\
-% \cs{onecolumn} \percentchar\textit{ finish the indices}
-% \end{flushleft}
-% With this extension the whole index will be set twocolumn with no page break
-% before the first subsection. But you have to switch back to onecolumn mode
-% manually at the end of the indices.
-%
-% The example above may be modified, if you want a onecolumn index:
-% \begin{flushleft}\ttfamily
-% \cs{begingroup} \percentchar\textit{ hold following extension local to this
-%   group}\\
-% \ \cs{makeatletter} \percentchar\textit{ allow }@\textit{ at macro names}\\
-% \ \cs{extendtheindex}\percentchar \textit{ some changes of
-%   }theindex\textit{ environment}\\
-% \ \ \{\cs{let}\cs{twocolumn}\cs{@firstoptofone} \percentchar\textit{
-%   deactivate \cs{twocolumn}}\\
-% \ \ \ \cs{let}\cs{onecolumn}\cs{@firstoptofone} \percentchar\textit{
-%   deactivate \cs{twocolumn}}\\
-% \ \ \ \cs{let}\cs{clearpage}\cs{relax} \percentchar\textit{ deactivate
-%   \cs{clearpage}}\\
-% \ \ \}\percentchar \textit{ changes before beginning}\\ 
-% \ \ \{\}\percentchar\textit{ no change after beginning}\\
-% \ \ \{\}\percentchar\textit{ no change before ending}\\
-% \ \ \{\}\percentchar\textit{ no change after ending}\\
-% \ \cs{makeatother} \percentchar\textit{ deactivate \cs{makeatletter}}\\
-% \ \cs{printindex} \percentchar\textit{ print index}\\
-% \cs{endgroup} \percentchar\textit{ end group with extended }theindex\textit{
-%   environment}
-% \end{flushleft}
-% This not only works with splitted index. You may use this also with one
-% single index.
-%
-% I hope, that these examples were useful to understand, how to use
-% \Package{splitidx}. Next section will show you, how to generate the indices
-% from a single raw index.
-%
-%
-% \section{Splitting the index}
-% \label{program}
-%
-% At most you'll call one of the \Program{splitindex} programs with one
-% parameter, the name of the raw index file, to split the raw index file into
-% several raw index files and call the index processor
-% \Program{MakeIndex}. Some of you will also set options to use another index
-% processor e.g. \Program{xindy} or to set some options of the index processor
-% e.g. ``\Cmdline{-g}'' to use German sorting with \Program{MakeIndex}. Only
-% few of you will also change the parsing of the raw index file and the
-% generation if the filenames and contents of the several new raw index files.
-%
-% The names of the options and the syntax of the Arguments is same at all of
-% the programs except \Program{splitindex.tex} (see section~\ref{TeX}):
-% \begin{description}\setlength{\labelsep}{1em}
-% \item[\texttt{--help}]
-% \item[{\makebox[1.2em][l]{\texttt{-h}}}]\vspace{-2\itemsep}
-%   Show information about usage, options and arguments and terminate without
-%   processing a index file.
-% \item[\texttt{--makeindex} \meta{program name}]~
-% \item[\texttt{-m} \meta{program name}]\vspace{-2\itemsep}
-%   Call \meta{program name}
-%   instead of \Program{makeindex} to process each generated raw index
-%   file. You may set this variable to an empty value. How this may be done
-%   depends on the shell, which you are using. Using bash you may achieve an
-%   empty value e.g. using \texttt{""} or \texttt{''}. An empty value means:
-%   Don't call an index processor.
-% \item[\texttt{--identify} \meta{regular expression}]~
-% \item[\texttt{-i} \meta{regular expression}]\vspace{-2\itemsep} 
-%   Uses \meta{regular
-%   expression} to identify the index short cut and the contents of the
-%   raw index file with this shortcut. The default value is:
-%   ``\verb|^(\\indexentry)\[([^]]*)\](.*)$|''. This means:
-%   \begin{description}
-%   \item[{\makebox[1em][l]{\texttt{\textasciicircum}}}]
-%     Search from beginning of the line.
-%   \item[\texttt{(\string\\indexentry)}]~\par 
-%     Search for ``\verb|\indexentry|'' and
-%     set group 1 to this.
-%   \item[{\makebox[1em][l]{\texttt{\string\[}}}]
-%     Search for ``\verb|[|'' and ignore it.
-%   \item[\texttt{([\textasciicircum]]*)}]~\par
-%     Search for any character which is not ``]'' and set group 2 to this.
-%   \item[{\makebox[1em][l]{\texttt{\string\]}}}]
-%     Search for ``\verb|]|'' and ignore it.
-%   \item[\texttt{(.*)\$}]~\par
-%     Search for all characters till end of line and set group 3 to these.
-%   \end{description}
-%   The \meta{regular expression} is POSIX~1003.2 compatible.
-% \item[\texttt{--resultis} \meta{pattern}]~
-% \item[\texttt{-r} \meta{pattern}]\vspace{-2\itemsep}
-%   Set the lines, which are written to the
-%   generated raw index files after identification (see option
-%   \texttt{--identify}) to \meta{pattern}. Each \texttt{\$}\meta{digit} at
-%   \meta{pattern} will be replaced by the corresponding group, e.g. \verb|$1|
-%   will be replaced by the first group (see \texttt{--identify}). The default
-%   is: ``\verb|$1$3|'', which means: contents of group 1 and group 3.
-%
-%   If the \meta{regular expression} of option \texttt{--identify} doesn't
-%   match a line at the raw index file the line itself will be written.
-% \item[\texttt{--suffixis} \meta{pattern}]~
-% \item[\texttt{-s} \meta{pattern}]\vspace{-2\itemsep}
-%   Set the suffix of the names of the generated raw index files after
-%   identification (see option \texttt{--identify}) to \meta{pattern}. Each
-%   \texttt{\$}\meta{digit} at \meta{pattern} will be replaced by the
-%   corresponding group, e.g. \verb|$1| will be replaced by the first group
-%   (see \texttt{--identify}). The default is: ``\verb|-$2|'', which means:
-%   character `\texttt{-}' followed by contents of group 2.
-%
-%   If the \meta{regular expression} of option \texttt{--ifentify} doesn't
-%   match a line at the raw index file, all groups will be set to
-%   ``\texttt{idx}''.
-% \item[\texttt{--verbose}]
-% \item[{\makebox[1.2em][l]{\texttt{-v}}}]\vspace{-2\itemsep}
-%   Increase verbosity by one. More verbose means: tell the user more about,
-%   what the program is doing.
-% \item[\texttt{--version}]
-% \item[{\makebox[1.2em][l]{\texttt{-V}}}]\vspace{-2\itemsep}
-%   Show information about program version and terminate without processing a
-%   index file.
-% \end{description}
-% The OpenBSD binary \Program{splitindex-OpenBSD-i386} doesn't understand the
-% long option names (\texttt{--makeindex}, \texttt{--identify} \dots). But you
-% can use the alternative short option names (\texttt{-m}, \texttt{-i} \dots).
-%
-% The first no-option-argument at the command line is the name if the raw
-% index file, which has to be processed. All arguments, which follow the
-% argument ``\texttt{--}'' are interpreted as no-optional-arguments. All but
-% the first no-option-arguments will be passed to the index processor.
-%
-% You will find some examples at the following subsections.
-%
-%
-% \subsection{Using \Program{splitindex.pl}}
-% \label{perl}
-%
-% This is the reference implementation. Let's use an example to demonstrate,
-% how it works. If you have following \LaTeX{} file ``\File{allabout.tex}'':
-% \begin{verbatim}
-%  \documentclass{article}
-%  \usepackage[makeindex]{splitidx}
-%  \begin{document}
-%    Apples\sindex[fru]{apple} and oranges\sindex[fru]{orange} are 
-%    fruits\sindex{fruits}.
-%    Tomatos\sindex[veg]{tomato} are vegetables\sindex{vegetables}.
-%    Cats\sindex[ani]{cat} are animals\sindex[idx]{animals}.
-%  \end{document}
-% \end{verbatim}\vspace{-\baselineskip}
-% this generates a file ``File{allabout.idx}'':
-% \begin{verbatim}
-%  \indexentry[fru]{apple}{1}
-%  \indexentry[fru]{orange}{1}
-%  \indexentry{fruits}{1}
-%  \indexentry[veg]{tomato}{1}
-%  \indexentry{vegetables}{1}
-%  \indexentry[ani]{cat}{1}
-%  \indexentry[idx]{animals}{1}
-% \end{verbatim}\vspace{-\baselineskip}
-% 
-% This file can't be processed by a index processor like
-% \Program{MakeIndex}. If you want so split these raw index file into several
-% and run the default index processor, you do the following call (the
-% \Prompt{} is a symbol for the shell prompt):
-% \begin{quote}
-%   \Prompt{}\verb|splitindex.pl allabout.idx|
-% \end{quote}
-% You may omit the extension ``\File{.idx}'':
-% \begin{quote}
-%   \Prompt{}\verb|splitindex.pl allabout|
-% \end{quote}
-% Both commands will result in a file \File{allabout-fru.idx}:
-% \begin{verbatim}
-%  \indexentry[fru]{apple}{1}
-%  \indexentry[fru]{orange}{1}
-% \end{verbatim}\vspace{-\baselineskip}
-% a file \File{allabout-idx.idx}
-% \begin{verbatim}
-%  \indexentry{fruits}{1}
-%  \indexentry{vegetables}{1}
-%  \indexentry{animals}
-% \end{verbatim}\vspace{-\baselineskip}
-% a file \File{allabout-veg.idx}:
-% \begin{verbatim}
-%  \indexentry[veg]{tomato}{1}
-% \end{verbatim}\vspace{-\baselineskip}
-% and a file \File{allabout-ani.idx}:
-% \begin{verbatim}
-%  \indexentry[ani]{cat}{1}
-% \end{verbatim}\vspace{-\baselineskip}
-% After generation of these files, it calls the default index processor using
-% the command lines:
-% \begin{verbatim}
-%  makeindex allabout-fru.idx
-%  makeindex allabout-idx.odx
-%  makeindex allabout-veg.idx
-%  makeindex allabout-ani.idx
-% \end{verbatim}\vspace{-\baselineskip}
-% These calls create the raw index files \File{allabout-fru.ind},
-% \File{allabout-idx.ind}, \File{allabout-veg.ind} and
-% \File{allabout-ani.ind}, which can be loaded to the document using
-% e.g. \cs{printindex} from package \Package{splitidx}.
-%
-% If you don't want \Program{splitindex} to call any index processor, use
-% \begin{quote}
-%   \Prompt{}\verb|splitindex.pl -m "" allabout|
-% \end{quote}
-% instead of the shell command above.
-%
-% You may achieve the same files like above using (it's one input line not two
-% like shown here):
-% \begin{quote}\raggedright
-%   \Prompt{}\verb|splitindex.pl -i '^\\indexentry\[([^]]*)\](.*)$'|
-%   \verb|-s '-$1'| \verb|-r '\\indexentry$2' allabout|
-% \end{quote}
-%
-% If you want \Program{splitindex} to call \Program{makeindex} with additional
-% options ``\verb|-s foo.ist|'' to use the MakeIndex style file
-% \File{foo.ist}, you can do this call:
-% \begin{quote}
-%   \Prompt{}\verb|splitindex.pl allabout -- -s foo.ist|
-% \end{quote}
-% As you see ``\verb|--|'' is used to tell \Program{splitindex} to not
-% interprete ``\verb|-s foo.ist|'' as option ``\verb|--suffixis foo.ist|''.
-% All  \Program{splitindex} options must be put before ``\verb|--|'' but you
-% can put the raw file argument ``\verb|allabout|'' after that:
-% \begin{quote}
-%   \Prompt{}\verb|splitindex.pl -- allabout -s foo.ist|
-% \end{quote}
-%
-% If you want so use index processor \Program{xindy} instead of default index
-% processor \Program{MakeIndex} you can do this call:
-% \begin{quote}
-%   \Prompt{}\verb|splitindex.pl -m xindy allabout|
-% \end{quote}
-% If this is not at the standard \texttt{PATH} you may set the whole path:
-% \begin{quote}
-%   \Prompt{}\verb|splitindex.pl -m /home/me/bin/xindy allabout|
-% \end{quote}
-% With most perl implementations perl module \verb|Getopt::Long| allows to
-% put options after no-option-arguments. So you may also write:
-% \begin{quote}
-%   \Prompt{}\verb|splitindex.pl allabout -m /home/me/bin/xindy|
-% \end{quote}
-% with the same result.
-%
-%
-% \subsection{Using \Program{splitindex.jar}}
-% \label{Java}
-%
-% This should also be portable. If you are not using Sun Java 1.4.1 you may
-% try to recompile this using the shell command:
-% \begin{quote}
-%  \Prompt{}\verb|javac splitindex.java|
-% \end{quote}
-% This should result in a new \File{splitindex.class}. But it will fail
-% e.g. with Sun Java 1.3, because regular expressions are needed, which are
-% not available at Sun Java 1.3.
-%
-% The call of \Program{splitindex.class} is almost the same like shown at
-% section~\ref{perl} for \Program{splitindex.pl}, but you have to replace
-% ``\verb|splitindex.pl|'' by ``\verb|java splitindex|''. So the last example
-% from section~\ref{perl} becomes:
-% \begin{quote}
-%   \Prompt{}\verb|java splitindex allabout -m /home/me/bin/xindy|
-% \end{quote}
-%
-%
-% \subsection{Using \Program{splitindex} or \Program{splitindex.exe}}
-% \label{C}
-%
-% The Linux program \Program{splitindex} was compiled using glibc, so it works
-% same like \Program{splitindex.pl} and you may use not only:
-% \begin{quote}
-%   \Prompt{}\verb|splitindex -m /home/me/bin/xindy allabout|
-% \end{quote}
-% but also:
-% \begin{quote}
-%   \Prompt{}\verb|splitindex allabout -m /home/me/bin/xindy|
-% \end{quote}
-%
-% But the CygWin program \Program{splitindex.exe} was compiled using a
-% CygWin library. Because of this all options must be put before the first
-% no-option-argument. So you have to use:
-% \begin{quote}
-%   \Prompt{}\verb|splitindex.exe -m /home/me/bin/xindy allabout|
-% \end{quote}
-% At:
-% \begin{quote}
-%   \Prompt{}\verb|splitindex.exe allabout -m /home/me/bin/xindy|
-% \end{quote}
-% the arguments ``\verb|-m /home/me/bin/xindy|'' will be passed to the default
-% index processor \Program{MakeIndex}!
-%
-% You need the CygWin-DLL \File{cygwin1.dll} to run
-% \Program{splitindex.exe}. If you haven't already installed it, you may
-% download the DLL from \url{http://cygwin.com/snapshots}. You need
-% \Program{bzip2}, which can be found at \url{http://source.redhat.com/bzip2},
-% to decompress it. You may use \url{http://cygwin.com/setup.exe} to download
-% and install a minimal CygWin environment alternatively.
-%
-% The Linux-i386-ELF binary \Program{splitindex} was compiled and linked
-% using:
-% \begin{quote}\raggedright
-%  \Prompt{}\verb|gcc -O3 -Wall -osplitindex splitindex.c|\\
-%  \Prompt{}\verb|strip splitindex|\\
-% \end{quote}
-% The \Program{gcc} was:
-% \begin{verbatim}
-% gcc (GCC) 3.2
-% Copyright (C) 2002 Free Software Foundation, Inc.
-% \end{verbatim}\vspace{-\baselineskip}
-% The used \Program{glibc} is version 2.1.
-%
-% If you compile another binary e.g. for BSD, please contact me, so we may put
-% the new binary into the distribution or can build another binary
-% distribution.
-%
-%
-% \subsection{Using \Program{splitindex.tex}}
-% \label{TeX}
-%
-% The \TeX{} or \LaTeX{} program \Program{splitindex.tex} doesn't know any
-% options or arguments. It number of files, which can be generated, is limited
-% to to number of \TeX's free write handles. If there are other lines than
-% ``\verb|\indexentry|''-lines at the raw index file, running
-% \Program{splitindex.tex} will result in an error.
-%
-% You may use \Program{splitindex.tex} interactive:
-% \begin{quote}
-%  \Prompt{}\verb|tex splitindex|
-% \end{quote}
-% or
-% \begin{quote}
-%  \Prompt{}\verb|latex splitindex|
-% \end{quote}
-% If you do so, you will be asked for the name of the raw index file. You have
-% to omit the extension ``\File{.idx}'' answering that question.
-%
-% You may also use the \Program{splitindex.tex} not interactive e.g. if you
-% are working with a batch. To do so you have to define macro \cs{IDX} to the
-% name of the raw index file without extension ``\texttt{.idx}''. So the first
-% example of section~\ref{perl} would become:
-% \begin{quote}
-%  \Prompt{}\verb|tex \def\IDX{allabout}\input splitindex|
-% \end{quote}
-% You may also use \LaTeX{} instead of \TeX:
-% \begin{quote}
-%  \Prompt{}\verb|latex \def\IDX{allabout}\input splitindex|
-% \end{quote}
-%
-% The current version of \Program{splitindex.tex} doesn't call any index
-% processor. But maybe in future a version will be able to do so.
-%
-% \StopEventually{^^A
-% \begin{thebibliography}{99}
-% \bibitem{makeindex} \textsc{Leslie Lamport}: \textit{MakeIndex: An Index
-%     Processor For \LaTeX}, 17 February 1987
-% \bibitem{makeindexmanual} \textsc{Pehong Chen}, \textsc{Rick P. C. Rodgers}:
-%   \textit{MAKEINDEX(1L)}, Manual page, 10 December 1991
-% \end{thebibliography}
-% \PrintIndex\PrintChanges}
-%
-%
-% \section{Combining Indices}
-%
-% Now you should know, how to use package \Package{splitidx} and the
-% \Program{SplitIndex} programs to split the index. But what about combining
-% two or more indices to one, e.g. you don't want vegetables and fruits in the
-% same index? Try this:
-% \begin{flushleft}\ttfamily
-% \cs{documentclass}\{article\} \percentchar \textit{ We use \Class{article}
-%   class \dots}\\
-% \cs{usepackage}\{splitidx\} \percentchar \textit{ \dots\ and the
-%   \Package{splitidx} package}\\
-% \cs{makeindex} \percentchar \textit{ And we want index generation}\\
-% ~\\
-% \percentchar \textit{ We define 4 indices:}\\
-% \cs{newindex}[General Index]\{idx\} \percentchar \textit{ Name and shortcut
-%   of the 1st index}\\
-% \cs{newindex}[Index of Animals]\{ani\} \percentchar \textit{ \dots\ 2nd
-%   index}\\
-% \cs{newindex}[Index of Fruits And Vegetables]\{fru\} \percentchar
-% \textit{ \dots\ 3rd
-%   index}\\ 
-% ~\\
-% \cs{begin}\{document\}\\
-% Apples\cs{sindex}[fru]\{apple\} \percentchar \textit{ an entry to
-%   }fru\texttt{ index}\\
-% and oranges\cs{sindex}[fru]\{orange\} \percentchar \textit{ an entry to
-%   }fru\texttt{ index}\\
-% are fruits\cs{sindex}\{fruits\}.\ \percentchar \textit{ an implicit entry
-% to }idx\textit{ index}\\
-% Tomatoes\cs{sindex}[veg]\{tomato\} \percentchar \textit{ an entry to
-% }veg\textit{ index}\\
-% are\\
-% vegetables\cs{index}\{vegetables\}.\ \percentchar \textit{ an implicit
-%   entry to }idx\textit{ index}\\
-% Cats\cs{sindex}[ani]\{cat\} \percentchar \textit{ an entry to
-% }ani\textit{ index}\\
-% are animals\cs{sindex}[idx]\{animals\}.\ \percentchar \textit{ an explicite
-%   entry to }idx\textit{ index}\\
-% ~\\
-% \cs{printindex*} \percentchar \textit{ print all indices}\\
-% \cs{end}\{document\}
-% \end{flushleft}
-% And do the following call after splitting the index using
-% \Program{SplitIndex}:
-% \begin{quote}\raggedright
-%  \Prompt{}\verb|makeindex allabout-veg.idx allabout-fru.idx|\\
-% \end{quote}
-% Alternatively you can concatenate \File{allabout-fru.idx} to
-% \File{allabout-veg.idx} before running the index processor on
-% \File{allabout-veg.idx}.
-%
-%
-%
-% \section{Implementation of \Package{splitidx}}
-%
-%    \begin{macrocode}
-%<*package>
-%    \end{macrocode}
-%
-% \subsection{Options}
-%
-% The first option is used to activate index generation.
-%    \begin{macrocode}
-\DeclareOption{makeindex}{\AtEndOfPackage{\makeindex}}
-%    \end{macrocode}
-%
-% \changes{v0.9}{2006/05/07}{new option \texttt{useindex}}
-% With option \texttt{useindex} the original command \cs{index} behaves like
-% \cs{sindex}.
-%    \begin{macrocode}
-\DeclareOption{useindex}{%
-  \def\@se@nd@xc@d@{\let\index\sindex}%
-  \AtEndOfPackage{\@se@nd@xc@d@}%
-}
-\let\@se@nd@xc@d@\relax
-%    \end{macrocode}
-%
-% There is also an option to make \cs{sindex} ignores the optional argument and
-% behaves like \cs{index}.
-%    \begin{macrocode}
-\DeclareOption{allatone}{%
-  \ifx\@se@nd@xc@d@\relax\else
-    \PackageInfo{splitidx}{option `allatone' overwrites option `useindex'}%
-    \let\@se@nd@xc@d@\relax
-  \fi
-  \AtEndOfPackage{%
-    \renewcommand*{\sindex}[1][]{\index}%
-    \g@addto@macro\makeindex{\renewcommand*{\sindex}[1][]{\index}}%
-  }%
-}
-%    \end{macrocode}
-%
-% \changes{v0.9}{2006/05/07}{new option \texttt{protected}}
-% Do not expand index arguments.
-%    \begin{macrocode}
-\newif\if@verbindex\@verbindexfalse
-\DeclareOption{protected}{\@verbindextrue}
-%    \end{macrocode}
-%
-% \changes{v0.2}{2002/11/15}{new option \texttt{idxcommands}}
-% With option \texttt{idxcommands} every \cs{newindex} also defines a new index
-% command.
-%    \begin{macrocode}
-\newif\if@newidxcmd\@newidxcmdfalse
-\DeclareOption{idxcommands}{\@newidxcmdtrue}
-%    \end{macrocode}
-%
-% \changes{v0.2}{2002/11/15}{new option \texttt{split}}
-% With option \texttt{split} each index uses its own index file.
-%    \begin{macrocode}
-\newif\if@splitidx\@splitidxfalse
-\DeclareOption{split}{\@splitidxtrue}
-%    \end{macrocode}
-%
-% Processing the options
-%    \begin{macrocode}
-\ProcessOptions\relax
-%    \end{macrocode}
-%
-%
-% \subsection{Setting an Index Entry}
-%
-% \begin{macro}{\see}
-% \begin{macro}{\seealso}
-% \begin{macro}{\seename}
-% \begin{macro}{\alsoname}
-% These are four standard macros, which are also defined at
-% \Package{makeidx}. Hey, these definitions are stolen from \Package{makeidx}!
-% No, no, I'm not a bad guy, read ``\File{legal.txt}'', which comes with
-% \Package{makeidx}.
-%    \begin{macrocode}
-\newcommand*\see[2]{\emph{\seename} #1}
-\providecommand*\seealso[2]{\emph{\alsoname} #1}
-\providecommand\seename{see}
-\providecommand*\alsoname{see also}
-%    \end{macrocode}
-% \end{macro}
-% \end{macro}
-% \end{macro}
-% \end{macro}
-%
-% \begin{macro}{\sindex}
-% \begin{macro}{\@wrsindex}
-%   \changes{v0.9}{2006/03/07}{optionally do not expand the index argument}
-% \begin{macro}{\@@wrsindex}
-% This works similar to original \cs{index} but uses a splitted index. So it
-% allows an optional argument.
-%    \begin{macrocode}
-\newcommand*{\sindex}[2][]{%
-}
-\g@addto@macro\makeindex{%
-  \renewcommand*{\sindex}{%
-    \@bsphack\begingroup
-    \@sanitize
-    \@wrsindex
-  }%
-  \typeout{Using splitted index at \jobname.idx}%
-  \@se@nd@xc@d@
-}
-%    \end{macrocode}
-% At the following \cs{@@wrsindex} is used as a hook. If it is defines, it is
-% used to write out the index entry. This hook may be used from
-% e.g. \Package{hyperref} to add \verb|hyperpage| to the font selection of the
-% page number. This only works with \verb+encap |+.
-%   \changes{v1.0}{2006/07/30}{one level expansion of \cs{\@tempa} for
-%     hyperref hook}
-%    \begin{macrocode}
-\newcommand*{\@wrsindex}[2][]{%
-  \ifx\relax#1\relax
-    \if@splitidx
-      \@wrsindex[idx]{#2}%
-    \else
-      \def\@tempa{#2}%
-      \if@verbindex\@onelevel@sanitize\@tempa\fi
-      \@wrindex{\@tempa}%
-    \fi
-  \else
-    \def\@tempa{#2}%
-    \csname index@#1@hook\endcsname
-    \expandafter\ifx\csname @@wrsindex\endcsname\relax
-      \@@@wrsindex{#1}{{\@tempa}{\thepage}}%
-    \else
-      \def\@tempb{\@@wrsindex{#1}}%
-      \expandafter\@tempb\@tempa||\\%
-    \fi
-    \endgroup
-    \@esphack
-  \fi
-}
-\newcommand*{\@@@wrsindex}[2]{%
-  \begingroup
-    \if@splitidx
-      \expandafter\ifx\csname @indexfile@#1\endcsname\relax
-        \PackageError{splitidx}{%
-          Index entry for not existing index%
-        }{%
-          You've tried to set an index to index `#1', without
-          defining\MessageBreak
-          that index before using \string\newindex.\MessageBreak
-          This is only allowed, if you are not using package option
-          `split'.%
-        }%
-      \else
-        \expandafter\protected@write\csname @indexfile@#1\endcsname{}{%
-          \string\indexentry#2%
-        }%
-      \fi
-    \else
-      \protected@write\@indexfile{}{%
-        \string\indexentry[#1]#2%
-      }%
-    \fi
-  \endgroup
-}
-%    \end{macrocode}
-% If \Package{hyperref} was loaded at \cs{begin\{document\}} and
-% \Package{hyperref}-option \texttt{hyperindex} isn't disabled, and the hook
-% is not used, define it:
-%    \begin{macrocode}
-\AtBeginDocument{%
-  \begingroup\expandafter\expandafter\expandafter\endgroup
-  \expandafter\ifx\csname ifHy@hyperindex\endcsname\relax
-  \else
-    \csname ifHy@hyperindex\endcsname
-      \expandafter\ifx\csname @@wrsindex\endcsname\relax
-        \def\@@wrsindex#1#2|#3|#4\\{%
-          \ifx\\#3\\%
-            \@@@wrsindex{#1}{{#2|hyperpage}{\thepage}}%
-          \else
-            \def\Hy@temp@A{#3}%
-            \ifx\Hy@temp@A\HyInd@ParenLeft
-              \@@@wrsindex{#1}{{#2|#3hyperpage}{\thepage}}%
-            \else
-              \ifx\Hy@temp@A\HyInd@ParenRight
-                \@@@wrsindex{#1}{{#2|#3hyperpage}{\thepage}}%
-              \else
-                \@@@wrsindex{#1}{{#2|#3}{\thepage}}%
-              \fi
-            \fi
-          \fi
-        }%
-      \fi
-    \csname fi\endcsname
-  \fi
-}
-%    \end{macrocode}
-% \end{macro}
-% \end{macro}
-% \end{macro}
-%
-%
-% \subsection{Printing One Or More Indices}
-%
-% \begin{macro}{\printindex}
-% \begin{macro}{\printindex*}
-% This is used to print an index in the normal way. In most cases this uses
-% |theindex| environment, but it need not.
-%    \begin{macrocode}
-\newcommand*{\printindex}{%
-%    \end{macrocode}
-% The command may be called in the star version, which prints all defined
-% indices. This is same as \cs{printindices}.
-%    \begin{macrocode}
-  \@ifstar {%
-    \begingroup
-      \let\printindex@@endhook=\printindex@endhook
-      \let\printindex@endhook=\relax
-      \printindices%
-      \csname printindex@@endhook\endcsname
-    \endgroup
-  }{%
-%    \end{macrocode}
-% It may also be called with optional arguments to print one of the indices:
-%    \begin{macrocode}
-    \@ifnextchar [\@printindex%] brace check comment
-%    \end{macrocode}
-% Or it is called without any parameter and so it is same as at
-% \Package{makeidx} package:
-%    \begin{macrocode}
-    {%
-      \@input@{\jobname.ind}%
-      \csname printindex@endhook\endcsname
-    }%
-  }%
-}
-%    \end{macrocode}
-% \begin{macro}{\@printindex}
-% This is used to print one of the indices. The optional (here obligatory)
-% argument is the shortcut of the index.
-%    \begin{macrocode}
-\newcommand*{\@printindex}{}
-\def\@printindex[#1]{%
-%    \end{macrocode}
-% There can be one more optional argument, which is the title of the index. If
-% not, the default title \cs{index@\meta{shortcut}@name} is used.
-%    \begin{macrocode}
-  \@ifnextchar [%
-  {\@@printindex[{#1}]}%
-  {\@@printindex[{#1}][\csname index@#1@name\endcsname]}%
-}
-%    \end{macrocode}
-% \begin{macro}{\@@pintindex}
-% \changes{v0.2}{2002/11/15}{with option \texttt{split} general index has no
-%   suffix}
-% We use the default environment to print one of the indices, but we redefine
-% \cs{indexname} to the title of the wanted index, \cs{indexshortcut} to the
-% shortcut of the wanted index and \cs{index@preamble} to the preamble of the
-% wanted index. We do this in a group so it is local.
-%    \begin{macrocode}
-\newcommand*{\@@printindex}{}
-\def\@@printindex[#1][#2]{%
-  \begingroup
-    \edef\indexshortcut{#1}%
-    \def\indexname{#2}%
-    \let\index@preamble\relax
-    \expandafter\let\expandafter\index@preamble
-    \csname index@\indexshortcut @preamble\endcsname
-    \if@splitidx
-      \def\@tempa{idx}\def\@tempb{#1}%
-      \ifx\@tempa\@tempb\let\@indexsuffix\@gobble\fi
-    \fi
-    \@input@{\jobname\@indexsuffix{#1}.ind}%
-  \endgroup
-  \csname printindex@endhook\endcsname
-}
-%    \end{macrocode}
-% \begin{macro}{\@indexsuffix}
-% This generated the suffix from the shortcut. You may redefine this
-% function, if you need. I`m using a trick here, to define the macro with
-% proper catcodes but not to define it global. You may also use
-% \cs{@firstofone} instead of \cs{lowercase}.
-%    \begin{macrocode}
-\begingroup
-\catcode`\-12
-\lowercase{\endgroup
-  \newcommand*{\@indexsuffix}[1]{-#1}%
-}
-%    \end{macrocode}
-% \end{macro}
-% \end{macro}
-% \end{macro}
-% \end{macro}
-% \end{macro}
-%
-% \begin{macro}{\printindices}
-% This is used to print all defined indices in the order of their definition
-% and with their default titles. If the list is empty, is behaves like
-% \cs{printindex} without star and optional arguments.
-%    \begin{macrocode}
-\newcommand*{\printindices}{%
-  \ifx\@indices\@empty
-    \printindex
-  \else
-    \begingroup
-      \@for\@tempa:=\@indices\do{%
-        \expandafter\printindex\expandafter[\@tempa]%
-      }%
-    \endgroup
-  \fi
-}
-%    \end{macrocode}
-% \end{macro}
-%
-% \begin{macro}{\newindex}
-% \changes{v0.2}{2002/11/15}{optional definition of index-shortcut-command}
-% \changes{v0.2}{2002/11/15}{optional opening a new index file}
-% The definition of a new index has an obligatory argument, the shortcut for
-% this index, and an optional argument, the name of this index. If you omit
-% the optional argument the shortcut is used for the default name if the
-% index. The definition will be done global!
-%    \begin{macrocode}
-\newcommand*{\newindex}[2][\relax]{%
-  \@ifundefined{index@#2@name}{%
-    \if@verbindex
-      \expandafter\gdef\csname index@#2@hook\endcsname{%
-        \@onelevel@sanitize\@tempa
-      }%
-    \else
-      \expandafter\gdef\csname index@#2@hook\endcsname{}%
-    \fi
-    \ifx\@indices\@empty
-      \xdef\@indices{#2}%
-    \else
-      \xdef\@indices{\@indices,#2}%
-    \fi
-    \ifx \relax#1
-      \expandafter\xdef\csname index@#2@name\endcsname{#2}%
-    \else
-      \expandafter\xdef\csname index@#2@name\endcsname{#1}%
-    \fi
-    \if@newidxcmd
-      \expandafter\newcommand\expandafter*\csname #2\endcsname{}%
-      \expandafter\gdef\csname #2\endcsname{%
-        \sindex[#2]%
-      }%
-    \fi
-    \if@splitidx
-      \def\@tempa{#2}\def\@tempb{idx}%
-      \ifx\@tempa\@tempb
-        \global\let\@indexfile@idx=\@indexfile
-      \else
-        \expandafter\newwrite\csname @indexfile@#2\endcsname
-        \expandafter\immediate\expandafter\openout
-        \csname @indexfile@#2\endcsname=\jobname-#2.idx
-      \fi
-    \fi
-  }{%
-%    \end{macrocode}
-% If the index is already defined, an error occurs:
-%    \begin{macrocode}
-    \PackageError{splitidx}{%
-      index `#2' already defined%
-    }{%
-      You have already defined an index with shortcut `#2'.\MessageBreak
-      You can't define a new index with the same shortcut. If you'll continue
-      \MessageBreak
-      The new definition will be ignored.%
-    }%
-  }%
-}
-\if@splitidx
-  \@onlypreamble\newindex
-\fi
-%    \end{macrocode}
-% \end{macro}
-%
-% \begin{macro}{\newprotectedindex}
-%   \changes{v0.9}{2006/07/03}{new command}
-% Same like \cs{newindex} but always define an index with protected arguments.
-%    \begin{macrocode}
-\newcommand*{\newprotectedindex}[2][\relax]{%
-  \begingroup\@verbindextrue\newindex[{#1}]{#2}\endgroup
-}
-%    \end{macrocode}
-% \end{macro}
-%
-% \begin{macro}{\@indices}
-% This macro stores a list of the index shortcuts. This is needed by
-% e.g. \cs{printindices} and build by \cs{newindex}.
-%    \begin{macrocode}
-\newcommand*{\@indices}{}
-\gdef\@indices{}
-%    \end{macrocode}
-% \end{macro}
-%
-% \begin{macro}{\extendtheindex}
-% Extend \verb|theindex| by some macros called before starting the index,
-% after starting the index, before stopping the index and after stopping the
-% index. This may be used to change index behaviour. One additional change is
-% done, which may be useful: before the index \cs{index@preamble} is set to
-% \cs{index@\meta{shortcut}@preamble}.
-%    \begin{macrocode}
-\newcommand{\extendtheindex}[4]{%
-  \begingroup\expandafter\expandafter\expandafter\endgroup
-  \expandafter\ifx\csname splitindex@theindex\endcsname\relax
-    \let\splitindex@theindex=\theindex
-    \let\endsplitindex@theindex=\endtheindex
-  \fi
-  \renewcommand*{\theindex}{%
-    #1\splitindex@theindex #2%
-  }%
-  \renewcommand*{\endtheindex}{%
-    #3\endsplitindex@theindex #4%
-  }%
-}
-%    \end{macrocode}
-% \end{macro}
-%
-% \begin{macro}{\setindexpreamble}
-% Set one of the splitted index preambles or the original one.
-%    \begin{macrocode}
-\newcommand{\splitindex@setip}{}
-\let\splitindex@setip\setindexpreamble
-\let\setindexpreamble\relax
-\newcommand{\setindexpreamble}[2][]{%
-  \ifx \relax#1\relax
-    \begingroup\expandafter\expandafter\expandafter\endgroup
-    \expandafter\ifx\csname splitindex@setip\endcsname\relax
-      \@namedef{index@preamble}{#2}%
-    \else
-      \splitindex@setip{#2}%
-    \fi
-  \else
-    \@namedef{index@#1@preamble}{#2}%
-  \fi
-}
-%    \end{macrocode}
-% \end{macro}
-%
-% \begin{macro}{\useindexpreamble}
-% Use the index preamble and optional add additional information after it, if
-% it exists and if it is not empty:
-%    \begin{macrocode}
-\newcommand{\useindexpreamble}[1][]{%
-  \begingroup\expandafter\expandafter\expandafter\endgroup
-  \expandafter\ifx\csname index@preamble\endcsname\relax\else
-    \ifx\index@preamble\@empty\else
-      \index@preamble #1%
-    \fi
-  \fi
-}
-%    \end{macrocode}
-% \end{macro}
-%
-% \begin{macro}{\printsubindex}
-% \begin{macro}{\printsubindex*}
-% Works like \cs{printindex} but changes some macros before to level down the
-% headings at the index generation.
-%    \begin{macrocode}
-\newcommand*{\printsubindex}{%
-  \begingroup
-    \begingroup\expandafter\expandafter\expandafter\endgroup
-    \expandafter\ifx\csname chapter\endcsname\relax
-      \let\section\subsection
-      \begingroup\expandafter\expandafter\expandafter\endgroup
-      \expandafter\ifx\csname addsec\endcsname\relax\else
-        \def\addsec{\setcounter{secnumdepth}{0}\subsection}%
-      \fi
-    \else
-      \let\chapter\section
-      \def\@makeschapterhead{\section*}
-      \let\@makechapterhead\section
-      \begingroup\expandafter\expandafter\expandafter\endgroup
-      \expandafter\ifx\csname addchap\endcsname\relax\else
-        \let\addchap\addsec
-      \fi
-    \fi
-%    \end{macrocode}
-% Also, \cs{onecolumn} and \cs{twocolumn} and even \cs{clearpage} must be
-% disabled. The macros \cs{onecolumn} and \cs{twocolumn} cannot be let
-% \cs{relax} because the have an optional argument which must be used.
-%    \begin{macrocode}
-    \let\onecolumn\@firstoptofone
-    \let\twocolumn\@firstoptofone
-    \let\clearpage\relax
-    \let\cleardoublepage\relax
-%    \end{macrocode}
-% And the mark mechanism must also use one down:
-%    \begin{macrocode}
-    \def\markboth{\expandafter\markright\@gobble}%
-    \ifx\@mkboth\@gobble\else\let\@mkboth\markboth\fi
-%    \end{macrocode}
-% And the page style shouldn't change too:
-%    \begin{macrocode}
-    \let\thispagestyle\@gobble
-%    \end{macrocode}
-% Now, using \cs{printindex} enables all of it's features:
-%    \begin{macrocode}
-    \let\printindex@endhook=\endgroup
-    \printindex    
-}
-%    \end{macrocode}
-% \begin{macro}{\@firstoptofone}
-% Read the optional argument and do it.
-%    \begin{macrocode}
-\providecommand{\@firstoptofone}[1][]{#1}
-%    \end{macrocode}
-% \end{macro}
-% \end{macro}
-% \end{macro}
-%
-%    \begin{macrocode}
-%</package>
-%    \end{macrocode}
-%
-% \Finale
-%
-\endinput
-%
-% end of file `splitindex.dtx'
-%%% Local Variables:
-%%% mode: doctex
-%%% TeX-master: t
-%%% End:
diff --git a/Master/texmf-dist/source/latex/splitindex/splitidx.ins b/Master/texmf-dist/source/latex/splitindex/splitidx.ins
deleted file mode 100644
index a46c36533e2..00000000000
--- a/Master/texmf-dist/source/latex/splitindex/splitidx.ins
+++ /dev/null
@@ -1,93 +0,0 @@
-%%
-%% splitindex.ins
-%% Copyright (c) Markus Kohm, 2002
-%%
-%% $Id: splitidx.ins,v 1.2 2006/03/07 10:41:51 mjk Exp $
-%%
-%% This file is part of the `SplitIndex bundle'.
-%% ---------------------------------------------
-%%
-%% This file can be redistributed and/or modified under the conditions
-%% of the LaTeX Project Public License, either version 1.3a of this
-%% license or (at your option) any later version.
-%% The latest version of this license is in
-%%       http://www.latex-project.org/lppl.txt
-%% and version 1.3a or later is part of all distributions of LaTeX
-%% version 2005/12/01 or later.
-%%
-%% This work has status 'maintained'.
-%% Maintainer is Markus Kohm <komascript@gmx.info>.
-%%
-%% In particular, NO PERMISSION is granted to modify the contents of this
-%% file since it contains the legal notices that are placed in the files
-%% it generates.
-%%
-%% You are not allowed to redistribute this file without all the
-%% other files of the `SplitIndex bundle'. The list of all files 
-%% belonging to the `SplitIndex bundle' is given in the file 
-%% `manifest.txt'.
-%%
-%% This file will generate fast loadable files and documentation
-%% driver files from the doc files in this package when run through
-%% LaTeX or TeX.
-%%
-%%
-%% --------------- start of docstrip commands ------------------
-%%
-
-\input docstrip
-
-\preamble
-
-This is a generated file.
-
-Copyright (c) Markus Kohm, 2002
-
-This file was generated from file(s) of the `SplitIndex bundle'.
-----------------------------------------------------------------
-
-It may be distributed and/or modified under the conditions of 
-the LaTeX Project Public License, either version 1.3a of this
-license or (at your option) any later version.
-The latest version of this license is in
-   http://www.latex-project.org/lppl.txt
-and version 1.3a or later is part of all distributions of LaTeX
-version 2005/12/01 or later.
-
-This work has status 'maintained'.
-Maintainer is Markus Kohm <komascript@gmx.info>.
-
-This file may only be distributed together with a copy of the
-`SplitIndex bundle'. You may however distribute the `SpitIndex
-bundle' without such generated files.
-
-The list of all files belonging to the `SplitIndex bundle' is
-given in the file `manifest.txt'.
-
-\endpreamble
-
-\keepsilent
-\usedir{tex/latex/misc}
-
-\generate{\file{splitidx.sty}{\from{splitidx.dtx}{package}}}
-
-\Msg{*************************************************************}
-\Msg{*}
-\Msg{* To finish the installation you have to move `splitidx.sty'}
-\Msg{* files into a directory searched by TeX.}
-\Msg{* Using a TDS compatible TeX distribution, this would be e.g.}
-\Msg{* tex/latex/misc of your main or your local or your private}
-\Msg{* texmf path. If you don't know these paths, have a look}
-\Msg{* at your `texmf.cnf' or try:}
-\Msg{* \space\space kpsexpand \string\$TEXMFMAIN}
-\Msg{* \space\space kpsexpand \string\$TEXMFLOCAL}
-\Msg{* \space\space kpsexpand \string\$HOMETEXMF}
-\Msg{* You may also use another folder at your TEXINPUTS path.}
-\Msg{*}
-\Msg{* To produce the documentation run splitidx.dtx files}
-\Msg{* through LaTeX.}
-\Msg{*}
-\Msg{* Happy TeXing}
-\Msg{************************************************************}
-
-\endbatchfile
diff --git a/Master/texmf-dist/source/latex/splitindex/splitindex.c b/Master/texmf-dist/source/latex/splitindex/splitindex.c
deleted file mode 100644
index 41a092af734..00000000000
--- a/Master/texmf-dist/source/latex/splitindex/splitindex.c
+++ /dev/null
@@ -1,576 +0,0 @@
-/*
- * splitindex.c
- * Copyright (c) Markus Kohm, 2002
- *
- * $Id: splitindex.c,v 1.6 2003/01/05 10:50:07 mjk Exp $
- *
- * This file is part of the SplitIndex package
- *
- * This file can be redistributed and/or modified under the conditions
- * of the LaTeX Project Public License, either version 1.2 of this
- * license or (at your option) any later version.
- * The latest version of this license is in
- *       http://www.latex-project.org/lppl.txt
- * and version 1.2 or later is part of all distributions of LaTeX
- * version 1999/12/01 or later.
- *
- * You are not allowed to redistribute this file without all the
- * other files of the SplitIndex package
- */
-
-#include <sys/types.h>
-#include <sys/wait.h>
-
-#include <ctype.h>
-#include <errno.h>
-#include <regex.h>
-#include <stdarg.h>
-#include <stdio.h>
-#include <stdlib.h>
-#include <string.h>
-#include <unistd.h>
-
-enum { 
-    OPT_HELP = 'h', OPT_MAKEINDEX = 'm', OPT_IDENTIFY = 'i', 
-    OPT_RESULTIS = 'r', OPT_VERBOSE = 'v', OPT_SUFFIXIS = 's',
-    OPT_VERSION = 'V'
-};
-
-#if defined(__OpenBSD__) || defined(__FreeBSD__) || defined (NO_LONGOPT)
-
-#define HAS_LONGOPT 0
-#define HAPAR       ""
-
-#else /* defined(__OpenBSD__) || defined(__FreeBSD__) || defined(NO_LONGOPT) */
-
-#define HAS_LONGOPT 1
-#define HAPAR       "\n\t\t"
-
-#include <getopt.h>
-
-static const struct option long_options[] = {
-    { "help", 0, NULL, OPT_HELP },
-    { "makeindex", 1, NULL, OPT_MAKEINDEX },
-    { "identify", 1, NULL, OPT_IDENTIFY },
-    { "resultis", 1, NULL, OPT_RESULTIS },
-    { "suffixis", 1, NULL, OPT_SUFFIXIS },
-    { "verbose", 0, NULL, OPT_VERBOSE },
-    { "version", 0, NULL, OPT_VERSION },
-    { NULL, 0, NULL, 0 },
-};
-
-#endif
-
-static const char short_options[] = {
-    OPT_HELP,
-    OPT_MAKEINDEX, ':',
-    OPT_IDENTIFY, ':',
-    OPT_RESULTIS, ':',
-    OPT_SUFFIXIS, ':',
-    OPT_VERBOSE,
-    OPT_VERSION,
-};
-
-int Verbose = 0;
-
-char *MakeIndex = "makeindex";
-char *Identify = "^(\\\\indexentry)\\[([^]]*)\\](.*)$";
-char *ResultIs = "$1$3";
-char *SuffixIs = "-$2";
-char *IDX = NULL;
-char *Jobname = NULL;
-char * const * MakeIndexArgs = NULL;
-char *prgname = "splitindex";
-int MakeIndexArgc = 0;
-
-static void show_version( void ) {
-    printf( "splitindex 0.2a\n"
-	    "Copyright (c) 2002 Markus Kohm <kohm@gmx.de>\n" );
-}
-
-static void show_usage( FILE *out ) {
-    fputs( "Usage: splitindex [OPTION]... RAWINDEXFILE [MAKEINDEXOPTION]...\n",
-	   out );
-}
-
-static void usage_error( const char *format, ... ) {
-    if ( format != NULL ) {
-	va_list ap;
-	va_start( ap, format );
-	vfprintf( stderr, format, ap );
-	va_end( ap );
-    }
-    fputs( "Try `splitindex "
-#if HAS_LONGOPT
-	   "--help"
-#else
-           "-h"
-#endif
-	   "' for more information.\n", stderr );
-    exit( 1 );
-}
-
-static void show_help( void ) {
-    show_version();
-    printf( "\n" );
-    show_usage( stdout );
-    printf(
-	"Split a single raw index file into multiple raw index files.\n"
-        "Example: splitindex.pl foo.idx.\n"
-        "\n"
-        "Options:\n"
-        "  -h"
-#if HAS_LONGOPT
-        ", --help    "
-#else
-        "            "
-#endif
-        "\tshow this help and terminate\n"
-        "  -m"
-#if HAS_LONGOPT
-	", --makeindex"
-#endif
-	" PROGNAME   " HAPAR
-        "\tcall PROGNAME instead of default `%s'.\n", 
-	MakeIndex 
-	);
-    printf(
-        "  -i"
-#if HAS_LONGOPT
-	", --identify"
-#endif
-        " EXPRESSION " HAPAR
-        "\tuse regular EXPRESSION to match entries\n"
-        "\t\t\t(see also option --resultis and --suffixis).\n"
-        "\t\t\tDefault is `%s'.\n", 
-	Identify 
-	);
-    printf(
-        "  -r"
-#if HAS_LONGOPT
-	", --resultis"
-#endif
-	" PATTERN    " HAPAR
-        "\tcreate line to be written from PATTERN after matching\n"
-        "\t\t\tlines (see also option --identify).\n"
-        "\t\t\tDefault is `%s'.\n",
-	ResultIs
-	);
-    printf(
-        "  -s"
-#if HAS_LONGOPT
-	", --suffixis"
-#endif
-	" PATTERN    " HAPAR
-        "\tcreate suffix to be used from PATTERN after matching\n"
-        "\t\t\tlines (see also option --identify).\n"
-        "\t\t\tDefault is `%s'.\n",
-	SuffixIs
-	);
-    printf(
-        "  -v"
-#if HAS_LONGOPT
-	", --verbose "
-#else
-	"            "
-#endif
-        "\tbe more verbose\n"
-        "\t\t\t(can be used multiple to increase verbosity)\n"
-        "  -V"
-#if HAS_LONGOPT
-	", --version "
-#else
-        "            "
-#endif
-        "\tshow version and terminate\n"
-	);
-    exit(0);
-}
-
-static void ScanArguments( int argc, char * const argv[] ) {
-    int retVal;
-    char *hs;
-    if ( argc > 0 )
-	prgname = argv[0];
-#if HAS_LONGOPT
-    while ( ( retVal = getopt_long( argc, argv, short_options, 
-				    long_options, NULL ) ) != - 1 ) {
-#else
-    while ( ( retVal = getopt( argc, argv, short_options ) ) != - 1 ) {
-#endif
-	switch( retVal ) {
-	    case OPT_HELP:
-		show_help();
-		break; /* should never be reached */
-	    case OPT_VERSION:
-		show_version();
-		exit( 0 );
-		break; /* should never be reached */
-	    case OPT_MAKEINDEX:
-		MakeIndex = optarg;
-		break;
-	    case OPT_IDENTIFY:
-		Identify = optarg;
-		break;
-	    case OPT_RESULTIS:
-		ResultIs = optarg;
-		break;
-	    case OPT_SUFFIXIS:
-		SuffixIs = optarg;
-		break;
-	    case OPT_VERBOSE:
-		Verbose++;
-		break;
-	    case ':':
-	    case '?':
-		usage_error( NULL );
-		break; /* should never be reached */
-	}
-    }
-    if ( optind < argc ) {
-	IDX = argv[optind++];
-	MakeIndexArgc = argc - optind;
-	MakeIndexArgs = argv + optind;
-    } else {
-	usage_error( "missing raw index file\n" );
-	return; /* should never be reached */
-    }
-
-    if ( ( Jobname = strdup( IDX ) ) == NULL ) {
-	perror( prgname );
-        exit( errno );
-    }
-
-    if ( ( ( hs = strrchr( Jobname, '.' ) ) != NULL ) 
-	 && !strcmp( hs, ".idx" ) )
-	*hs = 0;
-}
-
-static char *regsub( const char *string, const char *replace, 
-		     int nmatch, regmatch_t pmatch[] ) {
-    int pass;
-    int size, n;
-    const char *hs;
-    char c;
-    char *retVal = NULL;
-    char *ts;
-    
-    /* Two times parsing to get size and replace */
-    for ( pass = size = 0; pass < 2; pass++ ) {
-	ts = retVal;
-	for ( hs = replace; *hs; hs++ ) {
-	    switch( *hs ) {
-		case '$':
-		    if ( isdigit( hs[1] ) ) {
-			n = *++hs - '0';
-			if ( ( pmatch[n].rm_so >= 0 ) 
-			     && ( pmatch[n].rm_so < pmatch[n].rm_eo ) ) {
-			    /* maybe group n is not empty */
-			    if ( pass ) {
-                                strncpy( ts, 
-					 string + pmatch[n].rm_so,
-					 pmatch[n].rm_eo - pmatch[n].rm_so );
-				ts += pmatch[n].rm_eo - pmatch[n].rm_so;
-			    } else {
-				size += pmatch[n].rm_eo - pmatch[n].rm_so;
-			    }
-			}
-		    } else {
-			if ( pass ) {
-			    *ts++ = '$';
-			} else {
-			    size++;
-			}
-		    }
-		    break;
-		case '\\':
-		    switch( c = *++hs ) {
-			case 0:   c = '\\'; hs--; break;
-			case 'b': c = '\b'; break;
-			case 'f': c = '\f'; break;
-			case 'n': c = '\n'; break;
-			case 'r': c = '\r'; break;
-			case 't': c = '\t'; break;
-		    }
-		    if ( pass ) {
-			*ts++ = c;
-		    } else {
-			size++;
-		    }
-		    break;
-		default:
-		    if ( pass ) {
-			*ts++ = *hs;
-		    } else {
-			size++;
-		    }
-		    break;
-	    }
-	}
-	if ( pass ) {
-	    *ts = '\0';
-	} else {
-	    if ( ( retVal = malloc( size + 1 ) ) == NULL ) {
-		perror( prgname );
-		exit( 1 );
-	    }
-	}
-    }
-
-    return retVal;
-}
-
-static struct list {
-    struct list *next;
-    char *name;
-    FILE *file;
-} *IDXfiles = NULL;
-
-static FILE *findsuffix( const char *name ) {
-    struct list *run;
-    for ( run = IDXfiles; 
-	  run != NULL;
-	  run = run->next ) {
-	const char *suffix = strchr( run->name, '\0' );
-	suffix -= 4; /* .idx */
-	suffix -= strlen( name );
-	if ( ( suffix >= run->name ) 
-	     && !strncmp( suffix, name, strlen( name ) ) ) {
-	    return run->file;
-	}
-    }
-    return NULL;
-}
-
-static struct list *addentry( char *name, FILE *file ) {
-    struct list *newentry = malloc( sizeof( struct list ) );
-    if ( !newentry ) {
-	perror( prgname );
-	exit( 1 );
-    }
-    newentry->name = name;
-    newentry->file = file;
-    if ( IDXfiles == NULL ) {
-        newentry->next = NULL;
-    } else {
-	newentry->next = IDXfiles;
-    }
-    IDXfiles = newentry;
-    return IDXfiles;
-}
-
-static FILE *newentry( const char *suffix ) {
-    char *name;
-    FILE *file;
-
-    if ( ( name = malloc( strlen( Jobname ) + strlen( suffix ) + 5 ) ) == NULL ) {
-	perror( prgname );
-	exit( 1 );
-    }
-
-    strcpy( name, Jobname );
-    strcat( name, suffix );
-    strcat( name, ".idx" );
-    
-    if ( ( file = fopen( name, "w" ) ) == NULL ) {
-	perror( name );
-	exit( errno );
-    }
-
-    if ( Verbose > 1 )
-	printf( "New index file %s\n", name );
-    addentry( name, file );
-    return file;
-}
-
-static void CloseAllIDX( void ) {
-    struct list *run;
-    for ( run = IDXfiles; run != NULL; run = run->next )
-	if ( fclose( run->file ) ) {
-	    perror( run->name );
-	    exit( 1 );
-	}
-}
-
-static void CallMakeIndex( void ) {
-    char **argv;
-    int idx;
-    struct list *run, *next;
-
-    if ( ( argv = calloc( MakeIndexArgc + 3, sizeof( char * ) ) ) == NULL ) {
-	perror( prgname );
-	exit( 0 );
-    }
-
-    for ( idx = 0; idx < MakeIndexArgc; idx++ )
-	argv[idx+1] = MakeIndexArgs[idx];
-
-    idx++;
-    argv[0] = MakeIndex;
-
-    for ( run = IDXfiles; run != NULL; run = next ) {
-	pid_t fret;
-	int status;
-	argv[idx] = run->name;
-
-	if ( ( fret = fork() ) == 0 ) {
-	    /* This is the child */
-	    if ( Verbose > 1 ) {
-		int i;
-		for ( i = 0; argv[i] != NULL; i++ )
-		    printf( "\"%s\" ", argv[i] );
-		printf( "\n" );
-	    }
-	    if ( execvp( MakeIndex, argv ) ) {
-		perror( MakeIndex );
-		exit( 1 );
-	    }
-	} else if ( fret == -1 ) {
-	    perror( prgname );
-	    exit( 1 );
-	} else {
-	    /* Parent */
-	    waitpid( fret, &status, 0 );
-	    if ( ! WIFEXITED( status ) ) {
-		fprintf( stderr, "%s terminated abnormally!\n", MakeIndex );
-		exit( 1 );
-	    }
-	}
-	
-	free( (void *)run->name );
-	next = run->next;
-	free( run );
-    }
-
-    
-}
-
-static void ProcessIDXFile( void ) {
-    FILE *fIDX;
-    char *line;
-    regex_t preg;
-    int retVal;
-    int buffersize = 2050;
-    regmatch_t pmatch[10];
-
-    if ( ( line = malloc( buffersize ) ) == NULL ) {
-	perror( prgname );
-	exit( errno );
-    }
-
-    if ( ( retVal = regcomp( &preg, Identify, REG_EXTENDED ) ) != 0 ) {
-	regerror( retVal, &preg, line, buffersize );
-	fprintf( stderr, "Error at identify: %s\n", line );
-	free( line );
-	exit( 1 );
-    }
-
-    if ( ( fIDX = fopen( IDX, "r" ) ) == NULL ) {
-	if ( !strcmp ( IDX, Jobname ) ) {
-	    if ( ( IDX = malloc( strlen( Jobname + 5 ) ) ) == NULL ) {
-		perror( prgname );
-		regfree( &preg );
-		free( line );
-		exit( errno );
-	    }
-	    strcpy( IDX, Jobname );
-	    strcat( IDX, ".idx" );
-	    if ( ( fIDX = fopen( IDX, "r" ) ) == NULL ) {
-		fprintf( stderr, 
-			 "Can read neither file %s nor file %s\n",
-			 Jobname, IDX );
-		regfree( &preg );
-		free( line );
-		exit( 1 );
-	    }
-	} else {
-	    fprintf( stderr,
-		     "Can't red file %s\n", IDX );
-	    regfree( &preg );
-	    free( line );
-	    exit( 1 );
-	}
-    }
-
-    while ( fgets( line, buffersize, fIDX ) != NULL ) {
-	char *hs;
-	char *result, *suffix;
-	FILE *f;
-	while ( ( ( hs = strchr( line, '\n' ) ) == NULL ) 
-		&& ! feof( fIDX ) ) {
-	    if ( ( line = realloc( line, 2 * buffersize ) ) == NULL ) {
-		perror( prgname );
-		exit( errno );
-	    }
-	    if ( fgets( line + buffersize - 1, buffersize + 1, fIDX ) == NULL )
-		break;
-	    buffersize *= 2;
-	}
-	if ( ferror( fIDX ) )
-	    break;
-	if ( ( hs = strchr( line, '\n' ) ) != NULL ) // remove newline
-	    *hs = 0;
-	if ( ( retVal = regexec( &preg, line, 10, pmatch, 0 ) ) == 0 ) {
-	    result = regsub( line, ResultIs, 10, pmatch );
-	    suffix = regsub( line, SuffixIs, 10, pmatch );
-	} else {
-	    int i;
-	    result = strdup( line );
-	    for ( i = 0; i < 10; i++ ) {
-		pmatch[i].rm_so = 0;
-		pmatch[i].rm_eo = 3;
-	    }
-	    suffix = regsub( "idx", SuffixIs, 10, pmatch );
-	}
-	if ( !result || !suffix ) {
-	    perror( prgname );
-	    exit ( 1 );
-	}
-
-	if ( ( f = findsuffix( suffix ) ) == NULL )
-	    f = newentry( suffix );
-	fprintf( f, "%s\n", result );
-
-	free( suffix );
-	free( result );
-    }
-
-    regfree( &preg );
-    free( line );
-    if ( ferror( fIDX ) ) {
-	perror( IDX );
-	fclose( fIDX );
-	exit( errno );
-    }
-    fclose( fIDX );
-
-    CloseAllIDX();
-
-    CallMakeIndex();
-}
-
-int main( int argc, char * const argv[] ) {
-    int retVal = 0;
-
-    ScanArguments( argc, argv );
-
-    if ( Verbose > 0 ) {
-	show_version();
-	if ( Verbose > 9 ) {
-	    int i;
-	    printf( "Identify:  \"%s\"\n", Identify );
-	    printf( "ResultIs:  \"%s\"\n", ResultIs );
-	    printf( "SuffixIs:  \"%s\"\n", SuffixIs );
-	    printf( "IDX:       \"%s\"\n", IDX );
-	    printf( "Jobname:   \"%s\"\n", Jobname );
-	    printf( "MakeIndex: \"%s\"", MakeIndex );
-	    for ( i = 0; i < MakeIndexArgc; i++ )
-		printf( " \"%s\"", MakeIndexArgs[i] );
-	    printf( "\n" );
-	}
-    }
-
-    ProcessIDXFile();
-
-    return retVal;
-}
diff --git a/Master/texmf-dist/tex/latex/splitindex/splitidx.sty b/Master/texmf-dist/tex/latex/splitindex/splitidx.sty
deleted file mode 100644
index 3b06c1b3e3f..00000000000
--- a/Master/texmf-dist/tex/latex/splitindex/splitidx.sty
+++ /dev/null
@@ -1,322 +0,0 @@
-%%
-%% This is file `splitidx.sty',
-%% generated with the docstrip utility.
-%%
-%% The original source files were:
-%%
-%% splitidx.dtx  (with options: `package')
-%% 
-%% This is a generated file.
-%% 
-%% Copyright (c) Markus Kohm, 2002
-%% 
-%% This file was generated from file(s) of the `SplitIndex bundle'.
-%% ----------------------------------------------------------------
-%% 
-%% It may be distributed and/or modified under the conditions of
-%% the LaTeX Project Public License, either version 1.3a of this
-%% license or (at your option) any later version.
-%% The latest version of this license is in
-%%    http://www.latex-project.org/lppl.txt
-%% and version 1.3a or later is part of all distributions of LaTeX
-%% version 2005/12/01 or later.
-%% 
-%% This work has status 'maintained'.
-%% Maintainer is Markus Kohm <komascript@gmx.info>.
-%% 
-%% This file may only be distributed together with a copy of the
-%% `SplitIndex bundle'. You may however distribute the `SpitIndex
-%% bundle' without such generated files.
-%% 
-%% The list of all files belonging to the `SplitIndex bundle' is
-%% given in the file `manifest.txt'.
-%% 
-\ProvidesPackage{splitidx}[%
- 2006/07/30 v1.0 multiple indices for LaTeX]
-\DeclareOption{makeindex}{\AtEndOfPackage{\makeindex}}
-\DeclareOption{useindex}{%
-  \def\@se@nd@xc@d@{\let\index\sindex}%
-  \AtEndOfPackage{\@se@nd@xc@d@}%
-}
-\let\@se@nd@xc@d@\relax
-\DeclareOption{allatone}{%
-  \ifx\@se@nd@xc@d@\relax\else
-    \PackageInfo{splitidx}{option `allatone' overwrites option `useindex'}%
-    \let\@se@nd@xc@d@\relax
-  \fi
-  \AtEndOfPackage{%
-    \renewcommand*{\sindex}[1][]{\index}%
-    \g@addto@macro\makeindex{\renewcommand*{\sindex}[1][]{\index}}%
-  }%
-}
-\newif\if@verbindex\@verbindexfalse
-\DeclareOption{protected}{\@verbindextrue}
-\newif\if@newidxcmd\@newidxcmdfalse
-\DeclareOption{idxcommands}{\@newidxcmdtrue}
-\newif\if@splitidx\@splitidxfalse
-\DeclareOption{split}{\@splitidxtrue}
-\ProcessOptions\relax
-\newcommand*\see[2]{\emph{\seename} #1}
-\providecommand*\seealso[2]{\emph{\alsoname} #1}
-\providecommand\seename{see}
-\providecommand*\alsoname{see also}
-\newcommand*{\sindex}[2][]{%
-}
-\g@addto@macro\makeindex{%
-  \renewcommand*{\sindex}{%
-    \@bsphack\begingroup
-    \@sanitize
-    \@wrsindex
-  }%
-  \typeout{Using splitted index at \jobname.idx}%
-  \@se@nd@xc@d@
-}
-\newcommand*{\@wrsindex}[2][]{%
-  \ifx\relax#1\relax
-    \if@splitidx
-      \@wrsindex[idx]{#2}%
-    \else
-      \def\@tempa{#2}%
-      \if@verbindex\@onelevel@sanitize\@tempa\fi
-      \@wrindex{\@tempa}%
-    \fi
-  \else
-    \def\@tempa{#2}%
-    \csname index@#1@hook\endcsname
-    \expandafter\ifx\csname @@wrsindex\endcsname\relax
-      \@@@wrsindex{#1}{{\@tempa}{\thepage}}%
-    \else
-      \def\@tempb{\@@wrsindex{#1}}%
-      \expandafter\@tempb\@tempa||\\%
-    \fi
-    \endgroup
-    \@esphack
-  \fi
-}
-\newcommand*{\@@@wrsindex}[2]{%
-  \begingroup
-    \if@splitidx
-      \expandafter\ifx\csname @indexfile@#1\endcsname\relax
-        \PackageError{splitidx}{%
-          Index entry for not existing index%
-        }{%
-          You've tried to set an index to index `#1', without
-          defining\MessageBreak
-          that index before using \string\newindex.\MessageBreak
-          This is only allowed, if you are not using package option
-          `split'.%
-        }%
-      \else
-        \expandafter\protected@write\csname @indexfile@#1\endcsname{}{%
-          \string\indexentry#2%
-        }%
-      \fi
-    \else
-      \protected@write\@indexfile{}{%
-        \string\indexentry[#1]#2%
-      }%
-    \fi
-  \endgroup
-}
-\AtBeginDocument{%
-  \begingroup\expandafter\expandafter\expandafter\endgroup
-  \expandafter\ifx\csname ifHy@hyperindex\endcsname\relax
-  \else
-    \csname ifHy@hyperindex\endcsname
-      \expandafter\ifx\csname @@wrsindex\endcsname\relax
-        \def\@@wrsindex#1#2|#3|#4\\{%
-          \ifx\\#3\\%
-            \@@@wrsindex{#1}{{#2|hyperpage}{\thepage}}%
-          \else
-            \def\Hy@temp@A{#3}%
-            \ifx\Hy@temp@A\HyInd@ParenLeft
-              \@@@wrsindex{#1}{{#2|#3hyperpage}{\thepage}}%
-            \else
-              \ifx\Hy@temp@A\HyInd@ParenRight
-                \@@@wrsindex{#1}{{#2|#3hyperpage}{\thepage}}%
-              \else
-                \@@@wrsindex{#1}{{#2|#3}{\thepage}}%
-              \fi
-            \fi
-          \fi
-        }%
-      \fi
-    \csname fi\endcsname
-  \fi
-}
-\newcommand*{\printindex}{%
-  \@ifstar {%
-    \begingroup
-      \let\printindex@@endhook=\printindex@endhook
-      \let\printindex@endhook=\relax
-      \printindices%
-      \csname printindex@@endhook\endcsname
-    \endgroup
-  }{%
-    \@ifnextchar [\@printindex%] brace check comment
-    {%
-      \@input@{\jobname.ind}%
-      \csname printindex@endhook\endcsname
-    }%
-  }%
-}
-\newcommand*{\@printindex}{}
-\def\@printindex[#1]{%
-  \@ifnextchar [%
-  {\@@printindex[{#1}]}%
-  {\@@printindex[{#1}][\csname index@#1@name\endcsname]}%
-}
-\newcommand*{\@@printindex}{}
-\def\@@printindex[#1][#2]{%
-  \begingroup
-    \edef\indexshortcut{#1}%
-    \def\indexname{#2}%
-    \let\index@preamble\relax
-    \expandafter\let\expandafter\index@preamble
-    \csname index@\indexshortcut @preamble\endcsname
-    \if@splitidx
-      \def\@tempa{idx}\def\@tempb{#1}%
-      \ifx\@tempa\@tempb\let\@indexsuffix\@gobble\fi
-    \fi
-    \@input@{\jobname\@indexsuffix{#1}.ind}%
-  \endgroup
-  \csname printindex@endhook\endcsname
-}
-\begingroup
-\catcode`\-12
-\lowercase{\endgroup
-  \newcommand*{\@indexsuffix}[1]{-#1}%
-}
-\newcommand*{\printindices}{%
-  \ifx\@indices\@empty
-    \printindex
-  \else
-    \begingroup
-      \@for\@tempa:=\@indices\do{%
-        \expandafter\printindex\expandafter[\@tempa]%
-      }%
-    \endgroup
-  \fi
-}
-\newcommand*{\newindex}[2][\relax]{%
-  \@ifundefined{index@#2@name}{%
-    \if@verbindex
-      \expandafter\gdef\csname index@#2@hook\endcsname{%
-        \@onelevel@sanitize\@tempa
-      }%
-    \else
-      \expandafter\gdef\csname index@#2@hook\endcsname{}%
-    \fi
-    \ifx\@indices\@empty
-      \xdef\@indices{#2}%
-    \else
-      \xdef\@indices{\@indices,#2}%
-    \fi
-    \ifx \relax#1
-      \expandafter\xdef\csname index@#2@name\endcsname{#2}%
-    \else
-      \expandafter\xdef\csname index@#2@name\endcsname{#1}%
-    \fi
-    \if@newidxcmd
-      \expandafter\newcommand\expandafter*\csname #2\endcsname{}%
-      \expandafter\gdef\csname #2\endcsname{%
-        \sindex[#2]%
-      }%
-    \fi
-    \if@splitidx
-      \def\@tempa{#2}\def\@tempb{idx}%
-      \ifx\@tempa\@tempb
-        \global\let\@indexfile@idx=\@indexfile
-      \else
-        \expandafter\newwrite\csname @indexfile@#2\endcsname
-        \expandafter\immediate\expandafter\openout
-        \csname @indexfile@#2\endcsname=\jobname-#2.idx
-      \fi
-    \fi
-  }{%
-    \PackageError{splitidx}{%
-      index `#2' already defined%
-    }{%
-      You have already defined an index with shortcut `#2'.\MessageBreak
-      You can't define a new index with the same shortcut. If you'll continue
-      \MessageBreak
-      The new definition will be ignored.%
-    }%
-  }%
-}
-\if@splitidx
-  \@onlypreamble\newindex
-\fi
-\newcommand*{\newprotectedindex}[2][\relax]{%
-  \begingroup\@verbindextrue\newindex[{#1}]{#2}\endgroup
-}
-\newcommand*{\@indices}{}
-\gdef\@indices{}
-\newcommand{\extendtheindex}[4]{%
-  \begingroup\expandafter\expandafter\expandafter\endgroup
-  \expandafter\ifx\csname splitindex@theindex\endcsname\relax
-    \let\splitindex@theindex=\theindex
-    \let\endsplitindex@theindex=\endtheindex
-  \fi
-  \renewcommand*{\theindex}{%
-    #1\splitindex@theindex #2%
-  }%
-  \renewcommand*{\endtheindex}{%
-    #3\endsplitindex@theindex #4%
-  }%
-}
-\newcommand{\splitindex@setip}{}
-\let\splitindex@setip\setindexpreamble
-\let\setindexpreamble\relax
-\newcommand{\setindexpreamble}[2][]{%
-  \ifx \relax#1\relax
-    \begingroup\expandafter\expandafter\expandafter\endgroup
-    \expandafter\ifx\csname splitindex@setip\endcsname\relax
-      \@namedef{index@preamble}{#2}%
-    \else
-      \splitindex@setip{#2}%
-    \fi
-  \else
-    \@namedef{index@#1@preamble}{#2}%
-  \fi
-}
-\newcommand{\useindexpreamble}[1][]{%
-  \begingroup\expandafter\expandafter\expandafter\endgroup
-  \expandafter\ifx\csname index@preamble\endcsname\relax\else
-    \ifx\index@preamble\@empty\else
-      \index@preamble #1%
-    \fi
-  \fi
-}
-\newcommand*{\printsubindex}{%
-  \begingroup
-    \begingroup\expandafter\expandafter\expandafter\endgroup
-    \expandafter\ifx\csname chapter\endcsname\relax
-      \let\section\subsection
-      \begingroup\expandafter\expandafter\expandafter\endgroup
-      \expandafter\ifx\csname addsec\endcsname\relax\else
-        \def\addsec{\setcounter{secnumdepth}{0}\subsection}%
-      \fi
-    \else
-      \let\chapter\section
-      \def\@makeschapterhead{\section*}
-      \let\@makechapterhead\section
-      \begingroup\expandafter\expandafter\expandafter\endgroup
-      \expandafter\ifx\csname addchap\endcsname\relax\else
-        \let\addchap\addsec
-      \fi
-    \fi
-    \let\onecolumn\@firstoptofone
-    \let\twocolumn\@firstoptofone
-    \let\clearpage\relax
-    \let\cleardoublepage\relax
-    \def\markboth{\expandafter\markright\@gobble}%
-    \ifx\@mkboth\@gobble\else\let\@mkboth\markboth\fi
-    \let\thispagestyle\@gobble
-    \let\printindex@endhook=\endgroup
-    \printindex
-}
-\providecommand{\@firstoptofone}[1][]{#1}
-\endinput
-%%
-%% End of file `splitidx.sty'.
diff --git a/Master/texmf-dist/tex/latex/splitindex/splitindex.tex b/Master/texmf-dist/tex/latex/splitindex/splitindex.tex
deleted file mode 100644
index c0aea07b097..00000000000
--- a/Master/texmf-dist/tex/latex/splitindex/splitindex.tex
+++ /dev/null
@@ -1,163 +0,0 @@
-% ======================================================================
-% splitindex.tex
-% Copyright (c) Markus Kohm, 2002
-%
-% $Id: splitindex.tex,v 1.2 2002/11/03 16:17:41 mjk Exp $
-%
-% This file is part of the SplitIndex package
-%
-% This file can be redistributed and/or modified under the conditions
-% of the LaTeX Project Public License, either version 1.2 of this
-% license or (at your option) any later version.
-% The latest version of this license is in
-%       http://www.latex-project.org/lppl.txt
-% and version 1.2 or later is part of all distributions of LaTeX
-% version 1999/12/01 or later.
-%
-% You are not allowed to redistribute this file without all the
-% other files of the SplitIndex package
-% ======================================================================
-
-% Set newlinechar
-\newlinechar`\^^J
-
-% Tell program information
-\message{splitindex.tex 0.1^^J%
-  Copyright (c) 2002 Markus Kohm <kohm@gmx.de>^^J^^J}
-
-% Change \catcode of At to be a letter
-\catcode`\@11\relax
-
-% New end processing command (one of these should do the job)
-\def\endprocessing{%
-  \csname @@end\endcsname
-  \csname end\endcsname
-  \csname endinput\endcsname
-}
-
-% Check out, if we are using LaTeX or plainTeX:
-\let\@earlyend\relax
-\def\@tempa{LaTeX2e}
-\expandafter\ifx\csname fmtname\endcsname\@tempa
-\else
-  \def\@tempa{plain}
-  \expandafter\ifx\csname fmtname\endcsname\@tempa
-    \def\newwrite{\alloc@7\write\chardef\sixt@@n}% not longer \outer
-    \chardef\@inputcheck=0\relax
-  \else
-    \message{Unkown format \csname fmtname\endcsname^^J
-      You have to use plainTeX or LaTeX2e to run
-      splitindex.tex!^^J}
-    \let\@earlyend\endprocessing
-  \fi
-\fi
-\@earlyend
-
-% Is \idx defined to the name of the raw index file?
-\expandafter\ifx\csname idx\endcsname\relax
-% no it isn't
-  \message{Enter the name of the idx file to be processed: }%
-  \advance\endlinechar\@M
-  \read\m@ne to\idx
-  \advance\endlinechar-\@M
-\fi
-
-% Sorry to late for log file
-\def\setjobname#1.idx#2\\{\def\jobname{#1}}
-\expandafter\setjobname\idx.idx\\
-
-\let\@earlyend\relax
-\openin\@inputcheck\idx %
-\ifeof\@inputcheck
-  \ifx\jobname\idx
-    \openin\@inputcheck\jobname.idx %
-    \ifeof\@inputcheck
-      \message{Error: Neither file `\idx' nor file `\jobname.idx' found!^^J}%
-      \let\@earlyend\endprocessing
-    \else
-      \xdef\idx{\jobname.idx}%
-    \fi
-  \else
-    \message{Error: File `\idx' not found!^^J}%
-    \let\@earlyend\endprocessing
-  \fi
-\fi
-\@earlyend
-
-\message{Read from file: \idx^^J%
-  Write to files: \jobname-*.idx^^J}
-
-% We are ready to do the processing
-
-% First we have to do the tricky splitting of the input line.
-% We do not allow lines which don't start with \indexentry.
-% We do not support other index file definitions but with an
-% optional argument of \indexentry.
-% We need some catcode changes to read and split the line. So
-% we do this part of the processing at a group.
-\newtoks\verbatim@line
-\begingroup
-\catcode`\^^M\active
-
-\begingroup
-\catcode`\|=0
-\catcode`\\=12
-|gdef|splitidxline\indexentry#1{%
-  |if #1[%
-    |expandafter|@splitidxline%
-  |else%
-    |expandafter |@splitidxline |expandafter i|expandafter d%
-    |expandafter x|expandafter ]|expandafter#1%
-  |fi%
-}
-|endgroup
-
-\gdef\@splitidxline#1]#2^^M{%
-  \idxwrite{#1}{\string\indexentry#2}%
-}
-
-\gdef\processidxline{%\message{\the\verbatim@line}%
-  \expandafter\splitidxline\verbatim@line^^M
-}
-\endgroup
-
-% Now, we can do the main job: writing to the index files
-\def\idxwrite#1#2{%
-  \expandafter\ifx\csname write@#1\endcsname\relax
-    % We need a new file
-     \message{New index file: \jobname-#1.idx^^J}%
-     \expandafter\newwrite\csname write@#1\endcsname
-     \immediate\openout\csname write@#1\endcsname \jobname-#1.idx %
-    % FixMe: Don't close by end TeX run but use \closeout
-  \fi
-  \immediate\write\csname write@#1\endcsname{#2}%
-}
-
-% Read the file verbatim and process the lines
-\newif\ifnoteof
-\newtoks\par@tok\par@tok{\par}
-\def\@makeother#1{\catcode`#112\relax}
-\def\processidxfile{
-  \immediate\openin\@inputcheck \idx %
-  \noteoftrue
-  \loop
-    \ifeof\@inputcheck \noteoffalse\fi
-  \ifnoteof
-    \begingroup
-      \let\do\@makeother\dospecials
-      \immediate\read\@inputcheck to \verbatim@line
-      \if\par@tok\verbatim@line\else
-        \processidxline
-      \fi
-    \endgroup
-  \repeat
-}
-
-\processidxfile
-
-% Trick to end processing in TeX and LaTeX
-\endprocessing
-%%% Local Variables: 
-%%% mode: tex
-%%% TeX-master: t
-%%% End: 
diff --git a/Master/tlpkg/bin/tlpkg-ctan-check b/Master/tlpkg/bin/tlpkg-ctan-check
index 9e6e91ebca0..e7407e62c2e 100755
--- a/Master/tlpkg/bin/tlpkg-ctan-check
+++ b/Master/tlpkg/bin/tlpkg-ctan-check
@@ -205,7 +205,7 @@ my @WorkingTLP = qw(
           sidecap sides siggraph silence simplecv simplewick siunitx
           skak skaknew slantsc slideshow smalltableof smartref smflatex
           snapshot songbook sort-by-letters soul spanish-mx sparklines spie
-          splines splitbib splitindex spotcolor sprite srcltx sseq
+          splines splitbib spotcolor sprite srcltx sseq
           ssqquote stack stage statex2 staves stdclsdv stdpage stellenbosch
           stex stringstrings struktex
           sttools stubs subdepth subeqn subeqnarray
diff --git a/Master/tlpkg/bin/tlprm b/Master/tlpkg/bin/tlprm
index d137cdaacd3..997fb3b8d6a 100755
--- a/Master/tlpkg/bin/tlprm
+++ b/Master/tlpkg/bin/tlprm
@@ -72,8 +72,8 @@ sub main
     unlink ($commit_file);
     `printf "$removals" >$commit_file`;
 
-    print "if license in Catalogue is still free, "
-          . "tell Robin.Fairbairns@cl.cam.ac.uk.\n";
+    print "if license in Catalogue is free, and package isn't, "
+          . "tell Robin.Fairbairns\@cl.cam.ac.uk.\n";
 
     my $tsrc = "$Master/tlpkg/tlpsrc";
     my @lines = `grep -l 'depend.* $f\$' $tsrc/collection-* $tsrc/scheme-*`;
diff --git a/Master/tlpkg/libexec/ctan2tds b/Master/tlpkg/libexec/ctan2tds
index 55c6eb746e4..e7c1300a3a1 100755
--- a/Master/tlpkg/libexec/ctan2tds
+++ b/Master/tlpkg/libexec/ctan2tds
@@ -451,6 +451,7 @@ chdir $startdir || die "chdir($startdir) failed: $!";  # back to raw
  'skak',	"&MAKEflatten",
  'slidenotes',	"die 'skipping, nonfree'",
  'songs',	"die 'skipping, requires binary'",
+ 'splitindex',	"die 'skipping, requires binary'",
  'staves',	"&MAKEflatten",
  'stellenbosch',"&MAKEcopy",
  'stex',	"&MAKEflatten",
diff --git a/Master/tlpkg/tlpsrc/collection-latexextra.tlpsrc b/Master/tlpkg/tlpsrc/collection-latexextra.tlpsrc
index 9145dd73418..d1641973b12 100644
--- a/Master/tlpkg/tlpsrc/collection-latexextra.tlpsrc
+++ b/Master/tlpkg/tlpsrc/collection-latexextra.tlpsrc
@@ -477,7 +477,6 @@ depend smflatex
 depend snapshot
 depend soul
 depend sparklines
-depend splitindex
 depend spotcolor
 depend sprite
 depend srcltx
diff --git a/Master/tlpkg/tlpsrc/splitindex.tlpsrc b/Master/tlpkg/tlpsrc/splitindex.tlpsrc
deleted file mode 100644
index 933e0630bfc..00000000000
--- a/Master/tlpkg/tlpsrc/splitindex.tlpsrc
+++ /dev/null
@@ -1,2 +0,0 @@
-name splitindex
-category Package