showexpl (20jan14)

git-svn-id: svn://tug.org/texlive/trunk@32737 c570f23f-e606-0410-a88d-b1316a301751

5 files changed, 103 insertions, 67 deletions

diff --git a/Master/texmf-dist/doc/latex/showexpl/README b/Master/texmf-dist/doc/latex/showexpl/README
index d65eb438860..f16e1bc655f 100644
--- a/Master/texmf-dist/doc/latex/showexpl/README
+++ b/Master/texmf-dist/doc/latex/showexpl/README
@@ -1,9 +1,16 @@
+showexpl
+========
 
-The LaTeX package `showexpl' provides a way to typeset LaTeX source
-code and the related result in the same document. The `listings'
-package is required. See `doc/showexpl-test.tex' for the details.
+The LaTeX package 'showexpl' provides a way to typeset LaTeX source code and
+the related result in the same document. The `listings' package is required.
+See 'doc/showexpl-test.tex' for the details.
 
-                          Rolf Niepraschk
-                          email: Rolf.Niepraschk@gmx.de
-                          2006-03-26
+Recommended TDS locations:
+
+   showexpl.sty:                             tex/latex/showexpl
+   README, showexpl.pdf, showexpl-test.pdf,
+   showexpl-test.tex, result-picture.pdf:    doc/latex/showexpl
+
+For general installation advice, see
+http://www.tex.ac.uk/cgi-bin/texfaq2html?label=instpackages
 
diff --git a/Master/texmf-dist/doc/latex/showexpl/showexpl-test.pdf b/Master/texmf-dist/doc/latex/showexpl/showexpl-test.pdf
index fe09737ee02..301571e46d3 100644
--- a/Master/texmf-dist/doc/latex/showexpl/showexpl-test.pdf
+++ b/Master/texmf-dist/doc/latex/showexpl/showexpl-test.pdf
diff --git a/Master/texmf-dist/doc/latex/showexpl/showexpl.pdf b/Master/texmf-dist/doc/latex/showexpl/showexpl.pdf
index c02c9cbff6a..fc0d997ec65 100644
--- a/Master/texmf-dist/doc/latex/showexpl/showexpl.pdf
+++ b/Master/texmf-dist/doc/latex/showexpl/showexpl.pdf
diff --git a/Master/texmf-dist/source/latex/showexpl/showexpl.dtx b/Master/texmf-dist/source/latex/showexpl/showexpl.dtx
index 3eb49722fda..78d41e731f4 100644
--- a/Master/texmf-dist/source/latex/showexpl/showexpl.dtx
+++ b/Master/texmf-dist/source/latex/showexpl/showexpl.dtx
@@ -2,7 +2,7 @@
 %
 % Copyright (C) 2004 -- 2006 by Rolf Niepraschk <Rolf.Niepraschk@gmx.de>
 % --------------------------------------------------------------------
-% 
+%
 % This file may be distributed and/or modified under the
 % conditions of the LaTeX Project Public License, either version 1.2
 % of this license or (at your option) any later version.
@@ -10,7 +10,7 @@
 %
 %    http://www.latex-project.org/lppl.txt
 %
-% and version 1.2 or later is part of all distributions of LaTeX 
+% and version 1.2 or later is part of all distributions of LaTeX
 % version 1999/12/01 or later.
 %
 % \fi
@@ -22,7 +22,7 @@
 %<package>\NeedsTeXFormat{LaTeX2e}[1999/12/01]
 %<package>\ProvidesPackage{showexpl}
 %<*package>
-    [2013/03/21 v0.3k Typesetting example code (RN)]
+    [2014/01/19 v0.3l Typesetting example code (RN)]
 %</package>
 %
 %<*driver>
@@ -39,7 +39,7 @@
 %</driver>
 % \fi
 %
-% \CheckSum{845}
+% \CheckSum{870}
 %
 % \CharacterTable
 %  {Upper-case    \A\B\C\D\E\F\G\H\I\J\K\L\M\N\O\P\Q\R\S\T\U\V\W\X\Y\Z
@@ -92,7 +92,7 @@
 % \DoNotIndex{\parbox,\setbox,\setlength,\hfill,\item,\number}
 % \DoNotIndex{\x}
 % \DoNotIndex{\SX@put@a,\SX@put@b,\SX@put@l,\SX@put@r,\SX@put@o,\SX@put@i}
-% 
+%
 % ^^A\DoNotIndex{\usepackage,\documentclass,\tableofcontens,\printindex}
 %
 % \title{The \textsf{showexpl} package\thanks{This document
@@ -114,32 +114,32 @@
 % \section{Usage}
 %
 % You can use \textsf{showexpl} like every other package by putting the
-% line 
+% line
 % \begin{verbatim}
-% \usepackage{showexpl} 
+% \usepackage{showexpl}
 % \end{verbatim}
 % \vspace{-\baselineskip}
 % in your source code. \textsf{showexpl} doesn't know any options by
-% itself, but all options for the underlying packages 
-% (\textsf{listings} and \textsf{graphicx}) will be passed to the 
+% itself, but all options for the underlying packages
+% (\textsf{listings} and \textsf{graphicx}) will be passed to the
 % respective packages.
 %
 % \textsf{showexpl} provides one command and one environment:
 % \begin{itemize}
 % \item |\LTXinputExample| and
 % \item \textsf{LTXexample}
-% \end{itemize} 
+% \end{itemize}
 %
 % \DescribeMacro{\LTXinputExample}
 % The syntax of |\LTXinputExample| is given by
 % \begin{quote}
-% |\LTXinputExample[|\meta{key val list}|]{|\meta{file}|}|    
+% |\LTXinputExample[|\meta{key val list}|]{|\meta{file}|}|
 % \end{quote}
-% 
+%
 % \DescribeEnv{LTXexample}
 % The syntax of the environment \textsf{LTXexample} is given by
 % \begin{quote}
-% |\begin{LTXexample}[|\meta{key val list}|]|\ldots|\end{LTXexample}|    
+% |\begin{LTXexample}[|\meta{key val list}|]|\ldots|\end{LTXexample}|
 % \end{quote}
 %
 % The set of options represented by \meta{key val list} is the same for
@@ -154,7 +154,7 @@
 %   \item[explpreset] A \meta{key val list} which serves for presetting the
 %   properties of the formatting of the source code, for values see the
 %   documentation of the \textsf{listings} package. The default value is
-%   
+%
 %   \item[graphic] Name of a (graphic) file. This file---if present---will
 %   be included and displayed instead of the formatted code. The default value is empty.
 %   \item[hsep] Defines the horizontal distance between the source code and the
@@ -170,13 +170,13 @@
 %   |o|, and |i| for top, bottom, left, right, outer, and inner. The last
 %   values give sense only for two-sided printing, where there are outer
 %   and inner margins of a page. The default value is |l|.
-%   \item[preset] Any \TeX\ code executed before the sample code but 
+%   \item[preset] Any \TeX\ code executed before the sample code but
 %   not visible in the listings area.
 %   \item[rangeaccept] Boolean valued key, default value is false. If set
 %   to  true, one can define ranges of lines that will be excerpted from
 %   the source code.
 %   \item[rframe] Defines the form of the frame around the formatted
-%   text. With a non-empty value (e.\,g. ``single'') a simple frame 
+%   text. With a non-empty value (e.\,g. ``single'') a simple frame
 %   will be drawn. In the future more kinds of frames will be supported.
 %   The default value is empty (no frame).
 %   \item[varwidth] Boolean valued key, default value is false. If set to
@@ -190,6 +190,9 @@
 %   \item[width] A \meta{dimen} value that defines the width of the
 %   formatted text. The default value depends of the relative positions of
 %   the source code and the formatted text.
+%   \item[scaled] Without a value the formatted text will be scaled to fit 
+%   the given width of the result area. With a number as value the formatted 
+%   text will be scaled by this number.
 % \end{description}
 %
 % \StopEventually{}
@@ -228,11 +231,11 @@
 \newcommand*\SX@defaultWD[2]{%
   \afterassignment\SX@def@WD\dimen@#2\linewidth\relax{#1}}
 \newcommand*\SX@def@WD{}
-\def\SX@def@WD#1\relax#2{\edef#2{\the\dimen@}} 
+\def\SX@def@WD#1\relax#2{\edef#2{\the\dimen@}}
 %    \end{macrocode}
 % \end{macro}
 % Additional keys.
-% \changes{v0.1a}{2004/11/14}{``hpos'' and ``vpos'' added, 
+% \changes{v0.1a}{2004/11/14}{``hpos'' and ``vpos'' added,
 % ``pos'' removed (RN).}
 % \changes{v0.1f}{2004/12/06}{``lstpreset'' added. (RN).}
 % \changes{v0.1h}{2005/06/03}{``codefile'' added. (RN).}
@@ -245,8 +248,13 @@
 \lst@Key{wide}f[t]{\lstKV@SetIf{#1}\if@SX@wide}
 \lst@Key{rframe}\relax{\def\SX@rframe{#1}}
 \lst@Key{preset}\relax{\def\SX@preset{#1}}
+\newcommand*\SX@scaled{}
+\lst@Key{scaled}{?}[!]{\def\SX@scaled{#1}}
 %    \end{macrocode}
-% \changes{v0.1h}{2005/06/03}{``lstpreset'' renamed to ``explpreset'' (RN).}
+% \changes{v0.1h}{2005/06/03}{``lstpreset'' renamed to ``explpreset'' 
+% (RN).}
+% \changes{v0.3l}{2014/01/19}{Option ``scaled'' and \cmd{\SX@scaled} 
+% added (RN).}
 %    \begin{macrocode}
 \lst@Key{explpreset}\relax{\def\SX@explpreset{#1}}
 \lst@Key{codefile}\relax{\def\SX@codefile{#1}}
@@ -284,7 +292,7 @@
 \newcommand\SX@preset{}
 \newcommand*\SX@explpreset{}
 %    \end{macrocode}
-% \changes{v0.3g}{2006/09/05}{Missing \cmd{\newcommand} for 
+% \changes{v0.3g}{2006/09/05}{Missing \cmd{\newcommand} for
 %   \cmd{\SX@@explpreset} added (RN).}
 %    \begin{macrocode}
 \newcommand*\SX@@explpreset{}
@@ -293,11 +301,11 @@
 %    \end{macrocode}
 % \begin{macro}{\SX@@preset}
 % Contains some redefinitions of \LaTeX\ macros and environments to do
-% nothing. \cmd{\SX@@preset} will be called just before 
-% typesetting the result of the example code. More can be added with 
+% nothing. \cmd{\SX@@preset} will be called just before
+% typesetting the result of the example code. More can be added with
 % the user key ``|preset=...|''.
 % \changes{v0.3e}{2006/04/05}{More redefinitions added (RN).}
-%    \begin{macrocode}  
+%    \begin{macrocode}
 \newcommand*\SX@@preset{%
   \renewcommand\documentclass[2][]{\SX@eat@version}%
   \renewcommand\usepackage[2][]{\SX@eat@version}%
@@ -323,8 +331,8 @@
 %    \end{macrocode}
 % \end{macro}
 % \begin{macro}{\isSX@odd}
-%  Parameter |#1| is executed on odd pages, parameter |#2| on 
-%  even pages. 
+%  Parameter |#1| is executed on odd pages, parameter |#2| on
+%  even pages.
 %    \begin{macrocode}
 \newif\ifSX@wasodd
 \if@twoside
@@ -335,7 +343,7 @@
   \newcommand*{\isSX@odd}[2]{#1}\SX@wasoddtrue
 \fi
 %    \end{macrocode}
-%  The call of \cmd{\isSX@odd} sets also \cmd{\ifSX@wasodd} to true or 
+%  The call of \cmd{\isSX@odd} sets also \cmd{\ifSX@wasodd} to true or
 %  false. If it's clear that no page break occurs, \cmd{\ifSX@wasodd}
 %  can be used.
 %    \begin{macrocode}
@@ -344,7 +352,7 @@
 %    \end{macrocode}
 % \end{macro}
 % \begin{macro}{\SX@attachfile}
-% \changes{v0.3a}{2005/08/20}{Attach file functionality (with pdf\TeX) 
+% \changes{v0.3a}{2005/08/20}{Attach file functionality (with pdf\TeX)
 %   added (RN).}
 %    \begin{macrocode}
 \newcommand*\SX@attachfile{%
@@ -357,13 +365,13 @@
 % \end{macro}
 % \begin{macro}{\SX@put@t/b/l/r/o/i}
 % Six macros for positioning |#2| (result) and |#3| (code). The result
-% can be 
-% \underline{a}bove, \underline{b}elow, \underline{l}eft or 
-% \underline{r}ight of the code area or on the \underline{o}uter or 
+% can be
+% \underline{a}bove, \underline{b}elow, \underline{l}eft or
+% \underline{r}ight of the code area or on the \underline{o}uter or
 % \underline{i}nner side. Parameter |#1| is the width of the result.
-% \changes{v0.1b}{2004/11/18}{Positioning the captions more independend 
+% \changes{v0.1b}{2004/11/18}{Positioning the captions more independend
 %   of the result and code area (RN).}
-% \changes{v0.1c}{2004/11/19}{Commands \cmd{\SX@KillAboveCaptionskip} and 
+% \changes{v0.1c}{2004/11/19}{Commands \cmd{\SX@KillAboveCaptionskip} and
 %   \cmd{\SX@KillBelowCaptionskip} added (RN).}
 % \changes{v0.1k}{2005/06/13}{Change [a]bove to [t]op (RN).}
 %    \begin{macrocode}
@@ -416,7 +424,7 @@
 }
 %    \end{macrocode}
 % \end{macro}
-% 
+%
 % \begin{environment}{LTXexample}
 % \changes{v0.1h}{2005/06/03}{Renamed from ``example'' to ``LTXexample' (RN).}
 %    \begin{macrocode}
@@ -425,10 +433,10 @@
   \@temptokena{#1}%
   \begingroup
 %    \end{macrocode}
-% For "codefile=..."/"graphic=..." if \cmd{\theltxexample} or 
+% For "codefile=..."/"graphic=..." if \cmd{\theltxexample} or
 % \cmd{\thelstlisting} is part of the filename.
 %    \begin{macrocode}
-    \advance\c@ltxexample\@ne \advance\c@lstlisting\@ne 
+    \advance\c@ltxexample\@ne \advance\c@lstlisting\@ne
     \expandafter\lstset\expandafter{\SX@explpreset,#1}%
     \edef\x{\endgroup
       \def\noexpand\SX@codefile{\SX@codefile}%
@@ -446,12 +454,12 @@
 }
 %    \end{macrocode}
 % \end{environment}
-% \changes{v0.1i}{2005/06/07}{Better caption positioning and 
+% \changes{v0.1i}{2005/06/07}{Better caption positioning and
 %   correct distance between the parts (RN).}
 % \changes{v0.1m}{2005/06/25}{Problem related to \cmd{\label}/\cmd{\ref}
 %   solved (RN).}
 % \changes{v0.2a}{2005/07/16}{``varwidth'' package used (RN).}
-% \changes{v0.2b}{2005/07/30}{Check if \cmd{\SX@put@}\texttt{?} 
+% \changes{v0.2b}{2005/07/30}{Check if \cmd{\SX@put@}\texttt{?}
 %   is defined (RN).}
 % \begin{macro}{\SX@put@code@result}
 %    \begin{macrocode}
@@ -465,7 +473,7 @@
     \expandafter\lstset\expandafter{\SX@@explpreset}%
     \ifx\lst@float\relax\else
 %    \end{macrocode}
-% \cmd{\lst@float} must be \cmd{\relax} because the whole ``example'' 
+% \cmd{\lst@float} must be \cmd{\relax} because the whole ``example''
 % should float but not the listings part in addition.
 %    \begin{macrocode}
       \let\SX@float=\lst@float\let\lst@float=\relax
@@ -480,11 +488,11 @@
     \trivlist\item\relax
       \stepcounter{ltxexample}\label{\SX@IDENT}%
 %    \end{macrocode}
-% Make \cmd{\SX@width} a real dimension if the unit is missing. 
+% Make \cmd{\SX@width} a real dimension if the unit is missing.
 %    \begin{macrocode}
       \SX@defaultWD\SX@width{\SX@width}%
 %    \end{macrocode}
-% Set the default width if necessary. 
+% Set the default width if necessary.
 %    \begin{macrocode}
       \ifdim\SX@width<\z@
         \@tempswatrue
@@ -497,7 +505,7 @@
         \edef\SX@width{\the\@tempdima}%
       \fi
 %    \end{macrocode}
-% Correct \cmd{\SX@width} if a frame is requested. 
+% Correct \cmd{\SX@width} if a frame is requested.
 %    \begin{macrocode}
       \ifx\SX@rframe\@empty
         \long\def\SX@frame##1{##1}%
@@ -511,13 +519,13 @@
         \parbox{\linewidth+\SX@overhang}{%
 %    \end{macrocode}
 % \cmd{\SX@codefile} (|\jobname.tmp|) is not nessesary for the filelist.
-%    \begin{macrocode}        
+%    \begin{macrocode}
           \let\@addtofilelist\@gobble
           \let\lst@ifdisplaystyle=\iftrue
           \SX@KillAboveCaptionskip\lst@MakeCaption{t}%
           \lst@belowskip=\z@
 %    \end{macrocode}
-% Use the ``natural'' width of the result code if ``varwidth'' is 
+% Use the ``natural'' width of the result code if ``varwidth'' is
 % true.
 % \changes{v0.3k}{2013/03/21}{Setting \cmd{\lst@MakeCaption} to \cmd{\@gobble}
 %    again (prevent multiply defined labels; label key)}.
@@ -525,8 +533,8 @@
           \let\SX@MakeCaption\lst@MakeCaption
           \let\lst@MakeCaption\@gobble{}
 %    \end{macrocode}
-% \changes{v0.3j}{2012/09/22}{Setting \cmd{\lst@MakeCaption} to 
-%    was a bad idea for hyperlinks. Group added to 
+% \changes{v0.3j}{2012/09/22}{Setting \cmd{\lst@MakeCaption} to
+%    was a bad idea for hyperlinks. Group added to
 %   varwidth environment. (Suggestions by Ulrike Fischer.).}
 %    \begin{macrocode}
           \setbox\SX@ResBox\hbox{%
@@ -553,9 +561,9 @@
 }
 %    \end{macrocode}
 % \end{macro}
-% \changes{v0.3g}{2006/09/05}{\cmd{\SX@ProcessResult} is now working 
+% \changes{v0.3g}{2006/09/05}{\cmd{\SX@ProcessResult} is now working
 % correctly
-% using \cmd{\readline} and \cmd{\scantokens}. Thanks to Ulrich Diez 
+% using \cmd{\readline} and \cmd{\scantokens}. Thanks to Ulrich Diez
 % for help (RN).}
 %    \begin{macrocode}
 \newcommand\SX@SkipToFirst{%
@@ -593,7 +601,7 @@
 %    \end{macrocode}
 % \begin{macro}{\SX@input}
 % \changes{v0.1j}{2005/06/12}{For ranges of lines (RN).}
-%    \begin{macrocode} 
+%    \begin{macrocode}
 \newcommand\SX@input[1]{%
   \begingroup
     \IfFileExists{#1}{}%
@@ -619,8 +627,8 @@
   \endgroup
 }
 %    \end{macrocode}
-% \end{macro} 
-%    \begin{macrocode}   
+% \end{macro}
+%    \begin{macrocode}
 \newcommand*\SX@Info{%
   \typeout{--------------------------------}%
   \typeout{pos=\SX@pos}%
@@ -646,10 +654,11 @@
 \providecommand*\MakePercentComment{\catcode`\%14\relax}
 %    \end{macrocode}
 % \begin{macro}{\SX@resultInput}
-% \changes{v0.3b}{2005/10/15}{Input of result code now inside a group; 
+% \changes{v0.3b}{2005/10/15}{Input of result code now inside a group;
 % \cmd{\makeatother} added (RN).}
 % \changes{v0.3c}{2005/10/15}{Wrong catcode for newline char corrected (RN).}
 % \changes{v0.3d}{2005/12/06}{Missing \cs{par} added (RN).}
+% \changes{v0.3l}{2014/01/19}{Code for ``scaled'' option (RN).}
 %    \begin{macrocode}
 \newcommand*\SX@resultInput{%
   \ifx\SX@graphicname\@empty
@@ -661,7 +670,16 @@
       \else
        \let\SX@tempa=\input
       \fi
-      \SX@tempa{\SX@codefile}\par%
+      \if\SX@scaled ?%
+        \let\SX@tempb=\@firstofone
+      \else
+        \if\SX@scaled !%
+          \def\SX@tempb##1{\resizebox{\SX@width}{!}{##1}}%
+        \else
+          \def\SX@tempb##1{\scalebox{\SX@scaled}{##1}}%
+        \fi
+      \fi
+      \SX@tempb{\SX@tempa{\SX@codefile}}\par
     \endgroup
   \else
     \expandafter\includegraphics\expandafter[\SX@graphicparam]%
@@ -674,19 +692,19 @@
 %    \begin{macrocode}
 \newcommand*\SX@codeInput{%
 %    \end{macrocode}
-% Without a caption entry the command \cmd{\lstinputlisting} adds the 
-% filename to the ``list of listings'' (lol). This should be avoided. 
+% Without a caption entry the command \cmd{\lstinputlisting} adds the
+% filename to the ``list of listings'' (lol). This should be avoided.
 % \changes{v0.1d}{2004/11/20}{\cmd{\lstset}|{nolol}| and
 %   \cmd{\lstset}|{float=false}| added (RN).}
 % \changes{v0.1h}{2005/06/03}{\cmd{\lstset}|{float=false}| removed (RN).}
 %    \begin{macrocode}
   \begingroup
 %    \end{macrocode}
-% The default parameters for all examples. 
-%    \begin{macrocode}  
+% The default parameters for all examples.
+%    \begin{macrocode}
   \expandafter\lstset\expandafter{\SX@explpreset}%
 %    \end{macrocode}
-% If "numbers=none" then margin dimensions should be zero. 
+% If "numbers=none" then margin dimensions should be zero.
 %    \begin{macrocode}
     \expandafter\lstset\expandafter{\SX@@explpreset}%
     \ifx\lst@PlaceNumber\@empty
@@ -701,7 +719,7 @@
 % \end{macro}
 % \changes{v0.1h}{2005/06/03}{New macro \cmd{\LTXinputExample} (RN).}
 %    \begin{macrocode}
-\newcommand*\LTXinputExample[2][]{% 
+\newcommand*\LTXinputExample[2][]{%
   \g@addto@macro\SX@@explpreset{#1,codefile=#2}%
   \SX@put@code@result}%
 %    \end{macrocode}
@@ -721,7 +739,7 @@
   \def\theHlstnumber{\thelstlisting.\arabic{lstnumber}.\lst@neglisting}%
 }
 %    \end{macrocode}
-% \changes{v0.1g}{2004/12/10}{Loading of |showexpl.cfg| now at end of 
+% \changes{v0.1g}{2004/12/10}{Loading of |showexpl.cfg| now at end of
 %   package (RN).}
 % Changing the defaults possible in |showexpl.cfg|.
 %    \begin{macrocode}
diff --git a/Master/texmf-dist/tex/latex/showexpl/showexpl.sty b/Master/texmf-dist/tex/latex/showexpl/showexpl.sty
index 65451f40923..264edcd40ca 100644
--- a/Master/texmf-dist/tex/latex/showexpl/showexpl.sty
+++ b/Master/texmf-dist/tex/latex/showexpl/showexpl.sty
@@ -22,7 +22,7 @@
 %% 
 \NeedsTeXFormat{LaTeX2e}[1999/12/01]
 \ProvidesPackage{showexpl}
-    [2013/03/21 v0.3k Typesetting example code (RN)]
+    [2014/01/19 v0.3l Typesetting example code (RN)]
 \DeclareOption{final}{%
   \PassOptionsToPackage{\CurrentOption}{graphicx}%
   \PassOptionsToPackage{\CurrentOption}{listings}%
@@ -51,6 +51,8 @@
 \lst@Key{wide}f[t]{\lstKV@SetIf{#1}\if@SX@wide}
 \lst@Key{rframe}\relax{\def\SX@rframe{#1}}
 \lst@Key{preset}\relax{\def\SX@preset{#1}}
+\newcommand*\SX@scaled{}
+\lst@Key{scaled}{?}[!]{\def\SX@scaled{#1}}
 \lst@Key{explpreset}\relax{\def\SX@explpreset{#1}}
 \lst@Key{codefile}\relax{\def\SX@codefile{#1}}
 \newif\if@SX@rangeaccept \@SX@rangeacceptfalse
@@ -340,7 +342,16 @@
       \else
        \let\SX@tempa=\input
       \fi
-      \SX@tempa{\SX@codefile}\par%
+      \if\SX@scaled ?%
+        \let\SX@tempb=\@firstofone
+      \else
+        \if\SX@scaled !%
+          \def\SX@tempb##1{\resizebox{\SX@width}{!}{##1}}%
+        \else
+          \def\SX@tempb##1{\scalebox{\SX@scaled}{##1}}%
+        \fi
+      \fi
+      \SX@tempb{\SX@tempa{\SX@codefile}}\par
     \endgroup
   \else
     \expandafter\includegraphics\expandafter[\SX@graphicparam]%