new latex package codedoc (1apr09)

git-svn-id: svn://tug.org/texlive/trunk@12603 c570f23f-e606-0410-a88d-b1316a301751

7 files changed, 6556 insertions, 1 deletions

diff --git a/Master/texmf-dist/doc/latex/codedoc/CodeDoc-manual.pdf b/Master/texmf-dist/doc/latex/codedoc/CodeDoc-manual.pdf
new file mode 100644
index 00000000000..3f78a83663c
--- /dev/null
+++ b/Master/texmf-dist/doc/latex/codedoc/CodeDoc-manual.pdf
diff --git a/Master/texmf-dist/doc/latex/codedoc/CodeDoc-manual.tex b/Master/texmf-dist/doc/latex/codedoc/CodeDoc-manual.tex
new file mode 100644
index 00000000000..e0d76d10c7f
--- /dev/null
+++ b/Master/texmf-dist/doc/latex/codedoc/CodeDoc-manual.tex
@@ -0,0 +1,4870 @@
+\ifnum\month<10 \edef\month{0\the\month}\else	\edef\month{\the\month}\fi
+\ifnum\day<10	\edef\day{0\the\day}\else \edef\day{\the\day}\fi
+
+\documentclass[article(a4paper),
+index,% Comment this out if you don't want an index
+%obeystop,% Uncomment this if you don't want to print the implementation
+%produce,% Uncomment this to produce 'codedoc.cls'
+]{codedoc}
+
+%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%
+% Definitions for the example environments
+
+\def\bluecolor{blue!75!white}
+\def\redcolor{red!75!white}
+\def\yellowcolor{yellow!75!white}
+
+\newcount\colorcount
+
+\def\tryblue{%
+	\ifnum\colorcount=\inputlineno%
+		\let\incolor\bluecolor%
+		\def\commentcolor{white}%
+		\ifodd\inputlineno%
+			\let\outcolor\redcolor%
+			\let\filcolor\yellowcolor%
+		\else%
+			\let\outcolor\yellowcolor%
+			\let\filcolor\redcolor%
+		\fi%
+	\else%
+		\advance\colorcount by1\relax%
+		\expandafter\tryred%
+	\fi}
+
+\def\tryred{%
+	\ifnum\colorcount=\inputlineno%
+		\let\incolor\redcolor%
+		\def\commentcolor{white}%
+		\ifodd\inputlineno%
+			\let\outcolor\yellowcolor%
+			\let\filcolor\bluecolor%
+		\else%
+			\let\outcolor\bluecolor%
+			\let\filcolor\yellowcolor%
+		\fi%
+	\else%
+		\advance\colorcount by1\relax%
+		\expandafter\tryyellow%
+	\fi}
+
+\def\tryyellow{%
+	\ifnum\colorcount=\inputlineno%
+		\let\incolor\yellowcolor%
+		\def\commentcolor{gray}%
+		\ifodd\inputlineno%
+			\let\outcolor\bluecolor%
+			\let\filcolor\redcolor%
+		\else%
+			\let\outcolor\redcolor%
+			\let\filcolor\bluecolor%
+		\fi%
+	\else%
+		\advance\colorcount by1\relax%
+		\expandafter\tryblue%
+	\fi}
+
+\newdimen\csize
+\csize15cm 
+
+\newskip\exskip
+\exskip=2em plus 1em minus 1em\relax
+
+\newif\iftrycolor
+\trycolortrue
+
+\NewExample[]{ex0}{\ttfamily#}{#}{%
+	\vskip\exskip%
+	\iftrycolor%
+		\tryblue%
+	\else%
+		\global\trycolortrue%
+	\fi%
+  \fboxsep6pt%
+	\fboxrule4pt%
+	\noindent\hfil\fcolorbox{black}{\incolor}{%
+		\parbox{\csize}{\CodeInput}}%
+	\global\csize15cm\relax%
+	\vskip\exskip\relax}
+
+\NewExample{ex1}{\ttfamily#}{}{}
+
+\newdimen\exdimen
+\def\getnumber#1#2#3#4!{%
+	\ifnum\inputlineno<1000 %
+		\exdimen#3#2pt\def\movefil{\hskip-.#2\wd\filbox}\relax%
+	\else%
+		\exdimen#4#3pt\def\movefil{\hskip-.#3\wd\filbox}\relax%
+	\fi}
+
+\newbox\inbox
+\newbox\outbox
+\newbox\filbox
+\newdimen\outdimen
+\outdimen30pt
+
+
+\NewExample[visibleEOL]{sidebyside}{\ttfamily#}{#}{%
+	\expandafter\getnumber\the\inputlineno!
+	\iftrycolor%
+		\tryblue%
+	\else%
+		\global\trycolortrue%
+	\fi%
+	\vskip\exskip%
+	\noindent
+  \fboxsep6pt%
+	\fboxrule4pt%
+	\setbox\inbox=\hbox{\fcolorbox{black}{\incolor}{%
+		\vbox{%
+		\hsize.47\hsize%
+		\CodeInput}}}%
+%
+	\setbox\outbox=\hbox{\fcolorbox{black}{\outcolor}{%
+		\vtop{%
+			\hsize.3\hsize%
+			\parindent0pt%
+			\vskip1em\CodeOutput\vskip1em}}}%
+%
+	\setbox\filbox=\hbox{\fcolorbox{black}{\filcolor}{%
+		\hbox to.15\ht\inbox{%
+			\color{\filcolor}\vrule height.15\ht\inbox depth0pt width0pt\hss}}}%
+%
+	\hfil\unhcopy\inbox%
+	\movefil%
+	\ifdim\exdimen>.5\ht\inbox\relax\raise.4\ht\inbox\copy\filbox\else\raise.2\ht\inbox\copy\filbox\fi%
+	\hskip-\fboxrule\raise\exdimen\box\outbox%
+	\vskip\exskip\relax}
+
+\def\InvisibleSpace{\catcode`\ =10\relax}
+\def\cdcomment#1{\textcolor{\commentcolor}{\emph{#1}}}
+
+%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%
+% Definitions to print macro names
+
+\def\macrotopskip{\goodbreak\vskip1em plus .2em minus .2em}
+
+\def\maccolor{red!70!black}
+	
+\def\OneMac#1{\macrotopskip\noindent\textcolor{\maccolor}{\llap{\textbullet\ }\ttfamily#1}\par\nobreak\noindent\ignorespaces}
+\def\TwoMac#1{\noindent\textcolor{\maccolor}{\llap{\textbullet\ }\ttfamily#1}\par\nobreak}
+\let\PrintMacro\OneMac
+
+\IgnorePrefix{cd@}
+\def\PrintPrefix{\textcolor{gray}}
+
+%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%
+% Opening the file
+
+\Header
+{%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%
+
+This is the CodeDoc class, produced by itself
+with the `produce' option on, from `\jobname.tex'.
+
+Date: \FileDate
+Version: \FileVersion
+Author: Paul Isambert
+
+The documentation can be found in `\jobname.pdf'
+(you can produce it with `\jobname.tex' without the
+`produce' option).
+
+This file is published under the LaTeX Project Public License:
+
+Do whatever you want to that software,
+but if you modify it, change its name to avoid confusion,
+and if you copy part of the code please mention where it comes from.
+
+Comments, suggestions, bugs and, of course, NOTES:
+zappathustra@free.fr
+
+%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%}
+
+\ProduceFile{codedoc.cls}[codedoc][v.0.1][\the\year/\month/\day]
+\AddBlankLine\AddBlankLine\AddBlankLine
+
+%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%
+% The ladybug
+
+\def\makecox(#1,#2,#3,#4)#5{%
+	\vbox to0pt{\vskip-#3%
+	\hbox to0pt{\hskip#2%
+	\rotatebox[origin=c]{#1}{\coccinelle}\raise#5\hbox{\vbox{\everypar{}\vskip-5pt\tiny\sffamily\noindent#4}}\hss}\vss}}
+
+\def\coxx[#1](#2,#3,#4,#5){\makecox(#2,#3,#4,#5){#1}\index{Zmakecox(240,0pt,8pt,What am I\\doing here?){0pt}\hskip1.8cm|hyperpage}}
+
+\def\cox#1{%
+	\ifx#1[%
+		\def\next{\coxx[}%
+	\else%
+		\def\next{\coxx[0pt](}%
+	\fi\next}
+
+\def\coccinelle{%
+	\bgroup%
+		\setbox0=\hbox{\Huge\textbullet\llap{\raise-.4pt\hbox{\textbullet}}}
+		\color{black}%
+		\setbox1=\hbox{\textbullet}
+		\leavevmode\raise8.5pt\hbox to0pt{\hskip.5\wd0\hskip-.47\wd1\textbullet\hss}%
+		\Huge\color{red}%
+		\unhcopy0%
+		\hskip-\wd0%
+		\color{black}%
+		\raise3pt\rlap{\color{red!80!black}\hskip.47\wd0\vrule height7.5pt depth1.5pt}%
+		\raise3pt\rlap{\hskip.5pt.}%
+		\raise6pt\rlap{\hskip1.5pt.}%
+		\raise2.5pt\rlap{\hskip5pt.}%
+		\raise7.5pt\rlap{\hskip5.8pt.}
+	\egroup}%
+
+%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%
+
+\usepackage[T1]{fontenc}
+\usepackage[textwidth=16cm,textheight=24cm]{geometry}
+\usepackage{xcolor}
+\usepackage{graphicx}
+\usepackage{silence}% This avoids tens of `Marginpar on page X moved'
+\WarningFilter{latex}{Marginpar on page}% messages. Nothing vital, however.
+\let\next\relax
+\expandafter\ifx\csname pdfoutput\endcsname\relax
+	\ClassWarningNoLine{CodeDoc}{%
+		Because of numerous color manipulations,\MessageBreak
+		This documentation looks better in PDF.\MessageBreak
+		Give it a try}
+\else%
+	\ifnum\pdfoutput=1 %
+		\def\next{\usepackage[pdfborder=0 0 0]{hyperref}}
+	\else
+		\ClassWarningNoLine{CodeDoc}{%
+			Because of numerous color manipulations,\MessageBreak
+			This documentation looks better in PDF.\MessageBreak
+			Give it a try}
+	\fi
+\fi\next
+
+
+
+\ShortVerb"
+\VerbCommand§¤£
+\VerbBreak¨
+
+\def\CD{\textsf{CodeDoc}}
+\def\eTeX{$\varepsilon$-\TeX}
+\let\Part\part
+\def\part{\clearpage\Part}
+
+\title{The \textsf{CodeDoc} class\\\FileVersion\\\FileDate}
+\author{Paul Isambert\\\texttt{zappathustra@free.fr}}
+\date{}
+
+
+
+
+
+
+
+
+\begin{document}
+
+\maketitle
+
+\vfil
+{\fboxrule4pt %
+\hfil\fcolorbox{black}{blue}{\hbox to4cm{%
+	\Huge\scshape\raise.2cm\hbox{C}\hfil\raise.2cm\hbox{o}\hfil\raise.2cm\hbox{d}\hfil\textcolor{blue}{e}\hfil\vbox to1cm{\vfil}}}%
+\kern-1.5cm\raise.3cm\hbox{\fcolorbox{black}{yellow}{\hbox to.5cm{%
+	\Huge\raise.6cm\hbox{\&}\hfil\vbox to1.8cm{\vfil}}}}%
+\kern-.3cm\raise1.7cm\hbox{\fcolorbox{black}{red}{\hbox to2cm{%
+	\Huge\scshape D\hfil o\hfil c\hfil\vbox to2cm{\vfil}}}}%
+\cox(240,-3.2cm,3.1cm,\hskip-5pt???)}
+
+\vfil
+\noindent\CD\ is a class designed to produce \LaTeX\ files
+such as packages and classes along with their documentations. It does not
+depart from \LaTeX's ordinary syntax, unlike e.g. \textsf{DocStrip}, 
+allows any existing class to be loaded with its options and
+offers various fully customizable verbatim environments that 
+allows authors to typeset the code and documentation of
+their files as they want. To create the documentation,
+we compile the document as usual; to create the external file(s),
+we simply put "produce" in the class options and compile as before.
+
+Despite my earliest expectations, \CD\ is not better than
+\textsf{DocStrip}. It is simply different. If you want
+a well-delimited approach to literate programming, use
+\textsf{DocStrip}. On the other hand, \CD\ is more natural,
+in the sense that it is ordinary \LaTeX\ all the way down.
+Note that you can `mimick' \textsf{DocStrip}, either by
+putting any character at the beginning of each line of
+your code and setting the "\Gobble" parameter to 1 (this
+would be `inverted \textsf{DocStrip}'), or by setting
+the comment character to be of category 9 (`ignored')
+and beginning each line of the documentation with this character.
+In this latter case, only commands that are considered by
+\CD\ when producing a file should not be commented out...
+but I'm going too fast here, and you should learn the basics
+first...
+
+\vskip1em
+\noindent \CD\ is still in its infancy, as indicated by
+its version number. Although it has passed the test of producing
+this documentation, countless bugs will probably be reported,
+and meaningful suggestions will be made. Be patient, and
+send them to me. \emph{Any reported bug and meaningful
+suggestion will be rewarded by a musical note, played by
+a virtual instrument, and sent in the mp3 format.} Isn't
+it amazing? I know it is. I will have to hire musically
+educated secretaries to face the consequences of such
+a reckless proposition. But it is worth it. Once a stable
+version is reached, I might even write a symphony.\footnote{%
+`Meaningful suggestion' and `stable version' are fuzzy terms,
+you complain. Of course they are. Give me a chance!}
+
+Some of the ideas of this class are not mine; some were
+inspired by others; some are mine but were independantly
+implemented in other places; may all these people be
+thanked, as well as all the verbatim wizards around the world.
+And, oh, yeah, some ideas are mine, too.
+\thispagestyle{empty}
+\pagebreak
+
+\strut\vfil
+\tableofcontents
+\vfil
+\thispagestyle{empty}
+\pagebreak
+
+\part{User's manual}
+
+\section{Code \& Documentation}
+
+The source of this documentation looks roughly like this:
+\csize10cm
+\begin{ex0}
+\documentclass[article(a4paper),
+%produce, 
+]{codedoc}
+
+§cdcomment¤Preamble of the document£
+
+\begin{document}
+\section{Code \& Documentation}
+The source of this document...
+
+\ProduceFile{codedoc.cls}[codedoc][v.0.1][2009/03/13]
+\begin{code}
+	§cdcomment¤Material here will be written to codedoc.cls£
+	§cdcomment¤and typeset verbatim in the documentation.£
+\end{code}
+
+\ShortCode/
+/
+	§cdcomment¤This too...£
+/
+
+\begin{invisible}
+  §cdcomment¤This material will be written to codedoc.cls£
+  §cdcomment¤but not typeset in the documentation.£
+\end{invisible}
+
+\end{document}
+\end{ex0}
+
+Everything between "\begin{code}" and "\end{code}" is written
+verbatim to the dvi file. It is also the case for everything
+between two "\ShortCode" symbol, in this example `"/"'. Finally,
+if the comment sign at the beginning of the second line were
+removed, thus enabling the "produce" option, then this code
+would be written to "codedoc.cls" and no documentation would
+be produced. This is \CD's basic mechanism. Let's
+review it more precisely. In what follows, I will say `normal
+mode' if the "produce" option is not turned on, that is when
+we're typesetting the documentation, and `produce mode' otherwise,
+that is when \texttt{produce} is present among the class options and
+\CD\ is used to create an external file.
+
+The first two sections of this manual explain how \CD\ works
+and provide many examples.
+The third section lists all commands in alphabetical order, 
+and explains what they do in each mode in a more systematic
+fashion.
+
+
+
+
+\subsection{Writing code}
+
+\DescribeMacro{\ProduceFile\marg{File}\oarg{File name}\oarg{File version}\oarg{File date}}
+\noindent In normal mode, this macro provides four commands:
+"\FileSource" stores \meta{File}, and the next three arguments
+are stored in "\FileName", "\FileVersion" and "\FileDate"
+respectively. Those are optional, as indicated by their syntax.
+
+In produce mode, \CD\ opens \meta{File} and writes to it everything
+in a "code" environment. "\FileName", "\FileVersion" and "\FileDate"
+are also provided and may be used in "\Header" (see below) or in the
+file itself with "\CodeEscape" (see page \pageref{CodeEscape}). Thus, you can avoid
+mismatches between your documentation and the "\ProvidesPackage" declaration,
+for instance.
+
+\DescribeMacro{\CloseFile\marg{File}}
+\noindent In produce mode, when the "autoclose" option is on, "\ProduceFile"
+closes the file that was currently under production, if any. But you
+might want to keep a file open, in case you're writing to several files
+at the same time. That's why \CD's basic behavior is to keep all files
+open. Thus
+
+\csize5cm
+\begin{ex0}
+\ProduceFile{myfile}
+\begin{code}
+\def\foo{%
+\end{code}
+
+\ProduceFile{myotherfile}
+\begin{code}
+\relax
+\end{code}
+
+\ProduceFile{myfile}
+\begin{code}
+	FOO}
+\end{code}
+\end{ex0}
+
+\begin{ex1}
+\def\foo{%
+	FOO}\end{ex1}
+
+\noindent will write \fbox{\parbox{2cm}\CodeInput} to "myfile" and
+"\relax" to "myotherfile". This might not be very good practice,
+but who knows? that might be useful when building a complicated package.
+
+But \TeX\ cannot keep open as many files as one wants. Actually, \CD\
+will start complaining when more than 16 files are simultaneously in
+production. "\CloseFile" is used to close those whose production is
+over and allocate their streams to new files.\cox(240,4pt,12pt,Do files flow?)
+
+\DescribeEnvironment{code}
+This is the basic environment that writes its content to an external
+file in produce mode or displays it verbatim in the documentation in
+normal mode. There is nothing much to say. Each line is numbered,
+as one generally wants the implementation of a code to be. One important
+thing is that everything on the line after "\begin{code}" will be gobbled.
+"\end{code}" can appear wherever you want.
+
+\DescribeMacro{\CodeFont\marg{Font specifications}}
+The font of the "code" environment may be changed with "\CodeFont"
+(by default, it's "\ttfamily"). Since everything is in a group,
+you can use `spreading commands'.
+
+\DescribeMacro{\LineNumber\{code\}\marg{Font specifications}\marg{Width}\oarg{Number}}
+This sets the style of the line number, the width of the box it is put in (by default,
+it's "0pt", so numbers are in the left margin), and the starting value. The first argument
+is "code" and not \meta{code}, because "\LineNumber" is a macro that applies to
+all "example" environments (see the next section), and its first argument is the name
+of the environment to modify. By default, "code" is not an "example" environment (although
+it might be redefined as such) but this command is nonetheless available.
+
+\trycolorfalse
+\let\incolor\redcolor \let\outcolor\yellowcolor \let\filcolor\bluecolor
+\begin{sidebyside}
+\CodeFont{\color{red}\itshape}
+\LineNumber{code}{\ttfamily\footnotesize¨\color{green}}{2cm}[25]
+\begin{code} This will be gobbled
+\def\foo{%
+	FOO}
+\end{code}
+\end{sidebyside}
+
+\noindent Note that "\LineNumber" inherits the specification of "\CodeFont" that it
+doesn't override, in this example the italic shape. The "\color" command does \emph{not}
+belong to \CD, but to the \textsf{xcolor} package. If you want to do really interesting
+things with "code", it is better to redefine it as an "example" (see next section).
+
+As usual with "verbatim" environments, there exists a starred version of "code"
+that shows spaces.
+
+\DescribeEnvironment{invisible}
+In normal mode, everything in a "invisible" environment is skipped. In produce mode,
+however, the material is written to the file in production. This is useful to
+write code you don't want to comment in the documentation, like specifications
+at the beginning of the file or repetitive macro definitions. As you might imagine,
+there is no starred variant.
+
+\DescribeMacro{\Header\marg{Text}}
+In produce mode, unless the "noheader" option is on, \CD\ writes the following at the
+beginning of every file:
+
+\begin{ex1}
+% This is §meta¤\FileName£, produced by the CodeDoc class
+% with the `produce' option on.
+%
+% To create the documentation, compile §meta¤jobname.tex£
+% without the `produce' option.
+%
+% SOURCE: §meta¤File (\input in File...)£
+% DATE: §meta¤\FileDate£
+% VERSION: §meta¤\FileVersion£
+\end{ex1}
+\CodeInput
+
+\noindent where "\FileName", "\FileDate" and "\FileVersion" are set by "\ProduceFile".
+The `"\input in file"' part is optional and recursive, depending on files "\input" in
+your document. With "\Header", you can change this and print \meta{Text} instead.
+In \meta{Text}, ends of line are obeyed, and a comment sign followed by a space
+will start every line. Comment signs are normal sign.
+"\Header" should appear before "\ProduceFile".
+
+\DescribeMacro{\AddBlankLine}
+In produce mode, \CD\ writes a blank line to the file under production. Useful
+to delimit macros.
+
+\DescribeMacro{\TabSize\marg{Number}}
+This is the number of spaces by which a tabulation will be represented in verbatim
+context. Default is~2. In produce mode, however, tabs are written as tabs, so this
+parameter has no effect.
+
+\DescribeMacro{\Gobble\marg{Number}}
+The number of characters that will be gobbled at the beginning of each line. This
+works both in normal mode and in produce mode. This might be useful to indent code
+lines to make them more visible. When gobbling, a tab is considered as a single
+character and not as \emph{n} characters, \emph{n} being the value of "\TabSize".
+
+A totally blank line is written as a totally blank line in both modes, i.e. \CD\
+does not fill its need for gobbled characters on the next line. The "\end{code}"
+line doesn't need to be indented, although it can be. If there are more characters
+than the value of "\Gobble" before "\end{code}", then a new line is created.
+
+\LineNumber{code}{\ttfamily\footnotesize}{1em}[1]
+\CodeFont{\ttfamily}
+\begin{sidebyside*}
+\TabSize{3}
+\Gobble{2}
+§bgroup§InvisibleSpace§cdcomment¤My own value for \TabSize is 2,
+hence the 2-space tab here,
+but in the right panel it's 3£§egroup
+\begin{code*}
+12\foo   \foo
+
+12\foo	\foo
+\end{code*}
+\end{sidebyside*}
+
+\DescribeMacro{\BoxTolerance\marg{Dimension}}
+Verbatim lines often go into the right margin. This is the threshold above
+which \TeX\ reports an overfull box. Default is 0pt.
+
+
+
+
+\subsection{Macros to describe macros}
+
+Most of the commands in this section are similar to those in \textsf{DocStrip}.
+\CD\ has an indexing mechanism that simply uses \textsf{MakeIndex}; if the "index" option
+is on, the "makeidx" package is loaded and "\makeindex" is executed. This also
+means that "\printindex" is available. \CD\ does not require a special style file
+for \textsf{MakeIndex}. Thus, users can compile a documentation made with \CD\
+with \textsf{MakeIndex}'s default specifications.
+
+\let\PrintMacro\TwoMac
+
+\macrotopskip
+\DescribeMacro{\DescribeMacro\marg{Macro}}
+\DescribeMacro{\DefineMacro\marg{Macro}}
+\noindent These commands print their argument according to "\PrintMacro" (see below).
+The first token is "\stri§-ng"'ed,%
+\footnote{Verbatim text does not break by itself. I've used \texttt{\bslash VerbCommand}
+here (see below) to include a discretionary.}
+so it can be a control sequence. They also create
+an index entry with the first token, and here lies their difference: they print the
+page number differently to distinguish whether a macro is described or defined (in the
+implementation). By  default "described" macros have normal page numbers while
+"defined" macros have theirs in italics. This is not conventional, I agree, but
+it can be changed.\footnote{Since \CD\ doesn't index macros when \emph{used} in the
+code, I've found this choice more readable.}
+
+\macrotopskip
+\DescribeMacro{\DescribeEnvironment\marg{Environment}}\nobreak
+\DescribeMacro{\DefineEnvironment\marg{Environment}}\nobreak
+\noindent This is similar to the "macro" version above, except that the entry is followed
+by `(environment)' in the index.
+
+\macrotopskip
+\DescribeMacro{\DescribeIndexFont\marg{Font specifications}}
+\DescribeMacro{\DefineIndexFont\marg{Font specifications}}
+\noindent This sets how the page numbers are printed for "described" and "defined" macros
+(and environments) respectively.\cox[6pt](110,6cm,40pt,Don't you find these\\names confusing?)
+\marg{Font specifications} should be commands like "\ttfamily" and not argument-taking
+commands like "\texttt". You know that if you use \textsf{MakeIndex}.
+
+\let\PrintMacro\OneMac
+\DescribeMacro{\PrintMacro\marg{Macro or environment}}
+This is the command that typeset the ("\string"'ed) macro. It takes one argument.
+It is shown here not to use it as is but to redefine it. Its default definition is:
+
+\csize8cm
+\begin{ex0}
+\def\PrintMacro#1{%
+	\noindent%
+	\marginpar{\raggedleft\strut\ttfamily#1}%
+	\ignorespaces}
+\end{ex0}
+
+\noindent That is, it puts the macro in the margin. (Obviously, it was redefined in this documentation.)
+To achieve the same effect as with \textsf{DocStrip}, the following command is needed.
+
+\DescribeMacro\DocStripMarginpar
+This reverses marginpar and sets the right value for "\marginparpush" and "\marginparwidth".
+They weren't included by default because you have the right to do what you want
+with your margins.
+
+\DescribeMacro{\IgnorePrefix\marg{Macro prefix}}
+Many package and class authors prefix their internal commands with a string
+of letters to avoid clashes with other packages. For instance, if one writes
+a package "mypack", one may name all internal commands "\mp@foo", "\mp@boo",
+"\mp@moo", etc. Unfortunately, when indexed, they will all end up in the `M'
+letter, whereas one might want to have them sorted without the prefix,
+with "\mp@foo" indexed as if it was "\foo", etc. This is what "\IgnorePrefix"
+does; when sorting entries produced by "\DescribeMacro" and "\DefineMacro",
+\meta{Macro prefix} is ignored, although it is printed of course as part
+of the name. In our example, one would say "\IgnorePrefix{mp@}".
+This command has two restrictions: first, \meta{Macro prefix} should be
+no more than 8 characters long; second, any macro described with
+"\DescribeMacro" or "\DefineMacro" should have as many characters as
+"\IgnorePrefix", 3 in our example. A simple way to circumvent the latter
+shortcoming is to temporarily define \meta{Macro prefix} as an empty string:
+
+\csize9cm
+\begin{ex0}
+\IgnorePrefix{mp@}
+\DefineMacro\mp@foo §cdcomment¤Will be indexed as \foo£
+
+\DefineMacro\fo §cdcomment¤This will cause an error message£
+
+\IgnorePrefix{}
+\DefineMacro\fo §cdcomment¤This is perfectly ok£
+\IgnorePrefix{mp@}
+\end{ex0}
+
+\noindent You can have several "\IgnorePrefix" specifications, they
+are effective for the macros that follow them. For instance, some
+macros in \CD\ are prefixed with "cd@@", and when I define them
+in this documentation I specify "\IgnorePrefix{cd@@}" and then
+immediately "\IgnorePrefix{cd@}", which is the normal prefix.
+
+\DescribeMacro{\PrintPrefix\marg{Macro prefix}}
+Like "\PrintMacro", this command is not shown here to be used but
+to be redefined. It is put just before \meta{Macro prefix} when
+printing the index, so that you can typeset it differently. For
+instance, most \CD's internal macros are prefixed with "cd@".
+I have specified "\IgnorePrefix{cd@}" for this documentation
+and defined "\PrintPrefix" as "\def\PrintPrefix{\textcolor{gray}}"
+so that all prefixes are printed in gray (thanks to the \textsf{xcolor}
+package). For instance, "\cd@BadChar" is printed "\"{\color{gray}"cd@"}"BadChar"
+in the index (which you can verify if the "obeystop" option is commented out,
+thus including the implementation in the documentation).
+Obviously, "\def\PrintPrefix#1{\textcolor{gray}{#1}}" would have
+been equally efficient. Just note that since "\PrintPrefix" is
+"\let" to "\relax" by default, you have to use "\newcommand"
+and not "\renewcommand" when defining it for the first time,
+in case you prefer \LaTeX's command definitions.
+
+\let\PrintMacro\TwoMac
+\macrotopskip
+\DescribeMacro{\meta\marg{Argument}}
+\DescribeMacro{\marg\marg{Argument}}
+\DescribeMacro{\oarg\marg{Argument}}
+\DescribeMacro{\parg\marg{Argument}}
+\noindent These are well-known. In case you've forgotten:
+
+\noindent"\meta{Argument}" $\Rightarrow$ \meta{Argument}\par
+\noindent"\marg{Mandatory argument}" $\Rightarrow$ \marg{Mandatory argument}\par
+\noindent"\oarg{Optional argument}" $\Rightarrow$ \oarg{Optional argument}\par
+\noindent"\parg{Picture argument}" $\Rightarrow$ \parg{Picture argument}
+
+\let\PrintMacro\OneMac
+\DescribeMacro\bslash
+Everybody needs a backslash. This one is meant to print
+equally well in usual contexts and in PDF bookmarks created
+by \textsf{hyperref}, if any. So it can be used in titles
+without restriction.
+
+\DescribeMacro{\StopHere\marg{Code}}
+If the "obeystop" command is on, \CD\ will execute \meta{Code} and then "\end{document}",
+otherwise nothing happens.
+If the "index" option is also on, "\printindex" will be automatically executed after \meta{Code}.
+This is useful to let the user print a version of the documentation with some part(s)
+left out, typically the implementation.
+
+
+\subsection{Choosing the class}
+\CD\ by itself defines nothing that one wants a class to define. It lets the
+user call the desired class. To do so, just add the name of the class in the
+options of the "\documentclass" declaration. If you want the class to load
+options itself, put them after the name of the class, between parenthesis,
+and separated by semi-colons. Thus, "\documentclass[memoir]{codedoc}" loads
+the \textsf{memoir} class without options while "\documentclass[memoir(a4paper;oneside)]{codedoc}"
+loads it with the "a4paper" and "oneside" options.%
+\footnote{This means that if you specify an unknown option for
+\CD, it will try to load an (probably) unknown class, and you
+will get the corresponding error message.}
+
+By default, \CD\ loads the \textsf{article} class without options.
+
+
+
+
+
+
+
+\subsection{Dangerous strings}\label{dangerous}
+In produce mode, \CD\ becomes a string tester and nothing else.\cox(160,-5cm,30pt,\hskip-10pt Daaaaaaangerouuuuuus...)
+Hence, there are strings you don't want it to see because you don't want it to execute
+them. For instance, you don't want "\end{document}" to be executed
+unless at the end of the document. So when you say "\verb+\end{document}+",
+you want \CD\ to identify that "\end{document}" is not for real. 
+Fortunately, \CD\ does so. To some extent.
+
+More precisely, \CD\ identifies its own verbatim commands (described in the
+next section), \LaTeX's "\verb" and "verbatim" environment, as well as
+verbatim environments created with the "fancyvrb" package and the `short
+verb' characters defined with "\DefineShortVerb" from the same package.
+Thus, you can safely use "fancyvrb" and its companion "fvrb-ex".
+
+However, "\begin"'s and "\end"'s are not the only strings that must be
+used carefully. The most important things you want \CD\ to ignore
+in case they shouldn't be executed are its own macros. For instance, you
+don't want "\ProduceFile" to be executed when there's no reason to do so.
+But, unless you're documenting \CD\ itself, what might be the situation
+where "\ProduceFile" is executed wrongly? Simply if you use it in a statement with
+"\let", "\def", "\newcommand", etc. In produce mode, \CD\ does not recognizes
+these commands and for instance in "\let\ProduceFile\mycommand", "\let" will
+be skipped and "\ProduceFile" executed. Hence the following.
+
+\DescribeMacro{\DangerousEnvironment\marg{List of environments}}
+Whenever you want \CD\ to skip an environment in produce mode, for instance
+because it's a verbatim environment designed by yourself, you can add
+its name to "\DangerousEnvironment". If you add more than one name,
+use commas as separators.
+
+\let\PrintMacro\TwoMac
+\macrotopskip
+\DescribeMacro{\StartIgnore}
+\DescribeMacro{\StopIgnore}
+\noindent In produce mode, when \CD\ encouters "\StartIgnore", everything
+is skipped until "\StopIgnore" is found. This is useful to hide parts of
+your document that are irrelevant to the file you're building in produce
+mode (which is probably contained in the `implementation' section). You should
+be careful to define your "example" environments and other verbatim devices
+outside the skipped material, if you want \CD\ to identify them properly
+when it stops ignoring things.
+
+\csize12cm 
+\begin{ex0}
+\DangerousEnvironment{myenv,myotherenv}
+\begin{myenv}
+\end{document} §cdcomment¤This will be skipped by §CD£
+\end{myenv}
+
+\StartIgnore
+\let\ProduceFile\myproduce §cdcomment¤This too, but that will be taken into£
+                           §cdcomment¤account in normal mode£
+\StopIgnore
+\end{ex0}
+
+However, you should be aware of the following points:
+
+\noindent\llap{\textbullet\ }\emph{Any command that has some effect in produce mode should
+appear verbatim in your document}.
+
+\noindent Conversely,
+
+\noindent\llap{\textbullet\ }\emph{Commands that have some effect
+in produce mode cannot be redefined for that mode}.
+
+\noindent And when I say `cannot', I mean `you can try, it won't work'. This leads
+to the final principle:
+
+\noindent\llap{\textbullet\ }\emph{You can redefine a command to have the desired effect in normal mode
+as long as you respect its arguments, so that it can work properly in produce
+mode. And this should be done between} "\StartIgnore" \emph{and} "\StopIgnore"\emph{, of course.}
+
+For instance, you can say:
+
+\csize8.8cm
+\begin{ex0}
+\StartIgnore
+\renewcommand\CloseFile[1]{End of #1\clearpage}
+\StopIgnore
+\end{ex0}
+
+\noindent and when you say "\CloseFile{myfile}", `"End of myfile"' will be printed to
+the documentation, and a new page will be created, while in produce mode \CD\ will
+do its usual job. On the other hand, although "\let\cf\CloseFile" is meaningful in
+normal mode, in produce mode it won't take effect, i.e. \CD\ won't close anything.
+Finally, the previous example would have been catastrophic without "\StartIgnore"
+and "\StopIgnore", because in produce mode, \CD\ would have tried to execute "\CloseFile".
+
+"\StartIgnore" and "\StopIgnore" are also useful to make \CD\ go faster and avoid errors,
+if you use it with "\input". For instance, the following file would be perfect, provided
+everything that should be written to an external file is contained in "implementation.tex"
+
+\csize13cm
+\begin{ex0}
+\documentclass{codedoc}
+§cdcomment¤Write your verbatim definitions here, so that §CD§ can see them£
+\begin{document}
+
+\StartIgnore
+\input{documentation}
+\StopIgnore
+\input{implementation}
+
+\end{document} 
+
+\end{ex0}
+
+\noindent This example leads us to the final restriction:
+
+\noindent\llap{\textbullet\ }\emph{You should use} "\input" \emph{in the \LaTeX's way, i.e.}
+"\input{myfile}"\emph{, and not in \TeX's original way, i.e.} "\input myfile"\emph{,
+if the file in question is to be read in produce mode.} In the example above,
+"documentation" can be "\input" as you want, but "implementation" should be
+"\input" as shown.
+
+To know what commands have some effect in produce mode, see the summary of commands.
+
+
+
+\section{Verbatim Madness}
+\subsection{Example environments}
+\let\PrintMacro\TwoMac
+\DescribeEnvironment{example}
+\DescribeMacro\CodeInput
+\DescribeMacro\CodeOutput
+\noindent At first sight, the "example" environment is totally useless. Indeed, the following
+code does nothing:
+
+\csize3cm 
+\begin{ex0}
+\begin{example}
+\TeX
+\end{example}
+\end{ex0}
+
+\noindent However, it provides two commands "\CodeInput" and "\CodeOuput". The former
+prints the code verbatim (and in typewriter font), and the latter executes it. So in the end it's very useful
+to document your package or class, because it avoids typing the code twice (and therefore
+errors are avoided).
+
+\begin{sidebyside}
+\begin{example}
+\TeX
+\end{example}
+\CodeInput\noindent yields \CodeOutput.
+\end{sidebyside}
+
+The "example" environment is just one instance of a family of environments that you can
+create by yourself with the following commands.
+
+\macrotopskip
+\DescribeMacro{\NewExample\oarg{Options}\marg{Name}\marg{Code input}\marg{Code output}\marg{Immediate execution}}
+\DescribeMacro{\RenewExample\oarg{Options}\marg{Name}\marg{Code input}\marg{Code output}\marg{Immediate execution}}
+\noindent These two macros (whose difference is similar to the one between "\newcommand" and "\renewcommand")
+create an environment \meta{Name} that will provide two commands, "\CodeInput" and "\CodeOutput",
+whose effect is defined by \meta{Code input} and \meta{Code output}. Moreover, \meta{Name}
+will execute \meta{Immediate execution}.
+
+\meta{Code input} and \meta{Code output} have a peculiar syntax. The code to be processed
+is represented by~"#". For instance, the "example" environment is defined as:
+
+\begin{ex0}
+\NewExample{example}    §cdcomment¤This is §meta¤Name££
+           {\ttfamily#} §cdcomment¤\CodeInput yields but the code in typewriter font£
+           {#}          §cdcomment¤\CodeOutput simply executes the code£
+           {}           §cdcomment¤Nothing is done when §emph¤example£ is called£
+\end{ex0}
+
+You can do whatever you want. The code, represented by "#", may be the argument
+of a macro. For instance:\cox(220,0pt,6pt,`Hello, world', what a \emph{clich\'e}!)
+
+\eTeXOff
+\begin{sidebyside}
+\NewExample{myex}
+           {\ttfamily\underline{#}}
+           {}
+           {\CodeInput}
+\begin{myex}
+Hello, world!
+\end{myex}
+\end{sidebyside}
+\eTeXOn
+
+\noindent What does "myex" do? It sets the verbatim code in typewriter font
+and underlines it (which is admittedly not the most interesting thing you can do).
+\meta{Code output} is empty, so "\CodeOutput" will yields nothing. Finally,
+\meta{Immediate execution} calls "\CodeInput", so there's no need to call it
+after the environment.
+
+The following points apply:
+
+\noindent\llap{\textbullet\ }All environments thus defined have a starred variant
+that shows spaces as characters.
+
+\noindent\llap{\textbullet\ }"\CodeInput", "\CodeOuput" and \meta{Immediate execution} are
+groups, so you can put any command in them, they won't spread. For instance, in 
+"myex" above, there's no need to add a group to restrict the application
+of "\ttfamily".
+
+\noindent\llap{\textbullet\ }"\CodeOuput" \emph{really} executes your code. Any error
+will appear as such.
+
+\noindent\llap{\textbullet\ }Since "\CodeOuput" is a group, the definition you make
+won't work for the rest of your document, unless you make them global. For instance:
+
+\csize5cm
+\begin{ex0}
+\NewExample{myex}{}{#}{}
+
+\begin{myex}
+\def\foo{FOO!}
+\end{myex}
+
+\CodeOutput
+\foo
+\end{ex0}
+
+\noindent will yield an error message, because "\foo" was only locally defined in
+"\CodeOuput".
+
+\noindent\llap{\textbullet\ }Everything on the same line after the "\begin" statement
+of an environment will be gobbled.
+
+\noindent\llap{\textbullet\ }By default, \CD\ does not add any space or "\par" before
+"\CodeInput", "\CodeOuput" and \meta{Immediate execution}. A "\par" is added after
+"\CodeInput" if and only if the "\end" statement appears on its own
+line. Here's an illustration:
+
+\begin{sidebyside}
+\NewExample{myex}{\ttfamily#}{#}{}
+\parindent0pt
+
+\begin{myex}
+\TeX
+\end{myex}
++\CodeInput+ yields +\CodeOutput+
+
+\vskip1em
+\begin{myex}
+\TeX\end{myex}
++\CodeInput+ yields +\CodeOutput+
+\end{sidebyside}
+
+\noindent\llap{\textbullet\ }The "code" environment can be freely redefined as an
+example environment.
+
+\noindent\llap{\textbullet\ }All example environments obey "\TabSize" and "\Gobble"
+as defined in the previous section, as well as "\LineNumber" if they are numbered
+(see below). See the description of "\eTeXOff" and "\eTeXOn" below for a comment
+on "\Gobble".
+
+\meta{Options} may be one or several of the following (separated by commas):
+
+\noindent\textcolor{\maccolor}{\texttt{numbered}}\par
+\noindent Each line of "\CodeInput" is numbered. The count starts back to 1 at
+each occurrence of the environment.
+
+\noindent\textcolor{\maccolor}{\texttt{continuous}}\par
+\noindent Each line of "\CodeInput" is numbered. The count starts where the
+last occurrence of the same environment left. As an (utterly boring) example:\nobreak
+
+\trycolorfalse\let\incolor\yellowcolor \let\outcolor\bluecolor \let\filcolor\redcolor
+\begin{sidebyside}
+\NewExample[numbered]{myex1}{\ttfamily#}¨  {}{\CodeInput}
+\LineNumber{myex1}{\itshape}{1em}
+\NewExample[continuous]{myex2}{\ttfamily¨  \color{red}#}{}{\CodeInput}
+\LineNumber{myex2}{\itshape}{2em}
+\begin{myex2}
+First line
+Second line
+\end{myex2}
+\begin{myex1}
+First line
+Second line
+\end{myex1}
+\begin{myex2}
+Third line
+Fourth line
+\end{myex2}
+\end{sidebyside}
+
+\noindent\textcolor{\maccolor}{\texttt{visibleEOL}}\label{visibleEOL}\par\nobreak
+\noindent This is more complicated and requires some knowledge of how \CD\
+builds examples.
+
+Although you might not know it, your \TeX\ distribution is very probably running
+on \eTeX. That's the reason why \CD\ can process some code verbatim
+and executes it at the same time, as in the example environments, without the need
+for an external file. This is completely impossible with the original implementation of \TeX.
+If, for some reason, you don't have \eTeX, or you're not running on it,
+then \CD\ will use an external file.
+
+However, \eTeX's `virtual external file' mechanism is not perfect, and
+\CD\ has to cope with it. What happens is that when you use "\CodeOutput", \CD\
+hacks your code a little in order to simulate a real \TeX\ code; namely, before
+anything is processed, \CD\ removes ends of lines and commented parts of lines.
+For instance, if you say:
+
+\csize2cm
+\begin{ex0}
+\def\foo{%
+  FOO!}
+\foo
+\end{ex0}
+
+\noindent what \CD\ really processes with "\CodeInput" is \verb*"\def\foo{FOO!} \foo".
+Most of the time, that's exactly what you want. But it might happen that you're
+toying around with ends of lines or comment characters, and in that case everything
+will go wrong, as in:
+
+\csize4cm
+\begin{ex0}
+\catcode`\%=12
+I'm writing a % sign.
+\end{ex0}
+
+\noindent This\cox(290,-1.8cm,.5cm,\hskip-1.2cm*\emph{SIGH}*) will \emph{not} produce `I'm writing a \% sign', because \CD\ will remove
+everything from the comment sign to the end of the line, so that what "\CodeOuput"
+will try to execute is:
+
+\csize2.5cm
+\begin{ex0}
+\catcode`\
+I'm writing a
+\end{ex0}
+
+\noindent and of course the aborted "\catcode" declaration will yield an error message.
+To avoid this problem, the "visibleEOL" option makes \CD\ keeps everything. But now
+there's another issue: comments and end of line characters are processed at the same
+time as other macros and aren't interpreted independantly as in normal \TeX.
+For instance, the following code, if the "visibleEOL" option is on for the environment
+in question, will apply "\emph" to the end of line character and not to "A".
+
+\csize1.5cm
+\begin{ex0}
+\emph
+A
+\end{ex0}
+
+\noindent So you should be sure that comments and line ends occur where they won't hinder anything.
+If you find this utterly complicated, then you can use an external file whenever you're
+hacking ends of line, thanks to the following two macros.
+
+\macrotopskip
+\DescribeMacro{\eTeXOff}
+\DescribeMacro{\eTeXOn}
+\noindent The former makes \CD\ process all examples environments with an external file
+(whose extension is~".exp").
+The latter makes everything back to normal. If "\eTeXOff" applies, the "visibleEOL" option
+is of course irrelevant. Note that these two macros apply to examples that follow them
+and not to example definitions. For instance, "\eTeXOff" and then "\NewExample{myex}{#}{}{}"
+will not lead \CD\ to use an external file whenever "myex" is called, but simply as long
+as no "\eTeXOn" appears. To put simply, these two macros have no effect on "\NewExample".
+
+If "\Gobble" is positive, examples with \eTeX\ and examples without behave differently.
+The latter gobble characters before writing to the external file. Thus, "\CodeOutput"
+will execute line with the first characters gobbled. With \eTeX, however, nothing
+is gobbled in "\CodeOutput". This means that first characters, if meant to be
+gobbled, will be executed. Most of the time, such characters are spaces,
+and the difference won't be noticed. If, for some reason, you use other
+characters instead, and if you want to call "\CodeOutput" nonetheless, then
+a switch to an external file may be a good idea.
+
+
+
+
+
+\subsection{\texttt{\bslash ShortVerb} and friends}
+
+\CD\ provides a number of facilities to act on verbatim contexts. They
+declare one or more character(s) to have a special effect under certain
+circumstances. 
+
+\macrotopskip
+\DescribeMacro{\ShortVerb\marg{Character}}
+\DescribeMacro\UndoShortVerb
+\noindent This is well-known. \meta{Character} is turned into a shorthand
+for "\verb". You can define only one such character, and that's why "\UndoShortVerb"
+doesn't take an argument (like all "\Undo..." below). In \CD\ verbatim contexts, this character returns
+to its normal value.
+
+\UndoShortVerb
+\begin{sidebyside}
+\ShortVerb{*}
+The command *\TeX* gives \TeX.
+
+\begin{example}
+And the star appeared:*
+\end{example}\CodeInput
+\end{sidebyside}
+\ShortVerb"
+
+\DescribeMacro{\ShortCode\oarg{Example name}\marg{Character}}
+\DescribeMacro\UndoShortCode
+\noindent This turns \meta{Character} into an equivalent of "\begin{code}"
+and "\end{code}". In normal mode, the verbatim material will be printed
+according to \meta{Example name}'s specifications. If this optional
+argument is not present, then "\ShortCode" will follow "code"'s style.
+Most importantly, in produce mode everything between two \meta{Characters}
+will be written to the file under production.
+
+\begin{sidebyside}
+\RenewExample[continuous]{code}¨{\itshape\ttfamily#}{}{\CodeInput}
+\LineNumber{code}{\small\rmfamily}{1em}
+\ShortCode+ §cdcomment¤Oh yeah, braces are never£
+            §cdcomment¤needed...£ 
+
+\begin{code}
+Here it's +normal+
+\end{code}
+
++
+Here it writes code...
++
+\end{sidebyside}
+
+"\ShortVerb" and "\ShortCode" have one caveat. If you "\Undo..."
+them and the next character (disregarding spaces, comments and
+ends of lines) is a short verb or a short code respectively,
+in produce mode it will fire as if it was still active. A pair
+of braces after the "\Undo..." statement prevents this.
+
+\macrotopskip
+\DescribeMacro{\VerbBreak\marg{Character}}
+\DescribeMacro\UndoVerbBreak
+\noindent Every once in a while, breaking a verbatim line may be
+useful. In verbatim contexts, \meta{Character} breaks the line,
+creates an unnumbered new one and indents it to the indentation of
+the original line. When "\CodeOutput" is processed, the "\VerbBreak"
+character is ignored. However, you should not break in the middle of
+a control sequence (admittingly a strange idea), or it won't form.
+It is also ignored, of course, when writing to a file in produce mode.
+
+\UndoVerbBreak
+\begin{sidebyside}
+\VerbBreak{\=} §cdcomment¤An escape character is ok£
+\begin{example*}
+\TeX
+  \emph=\TeX
+\end{example*}\CodeInput
+
+And the result is: \CodeOutput
+\end{sidebyside}
+\VerbBreak¨
+
+\DescribeMacro{\VerbCommand\marg{Escape}\marg{Left brace}\marg{Right brace}}
+\DescribeMacro\UndoVerbCommand
+\noindent In verbatim contexts, those three characters will serve to form control sequences.
+In "\CodeOuput" and produce mode, they are ignored. More specifically, \meta{Escape}
+gobbles all letters following it (forming a putative command name) while everything
+vanishes that appears between \meta{Left brace} and \meta{Right brace}. This is 
+not a very sound device, and above all you should add a \meta{Left brace}-\meta{Right brace}
+pair after a command called with \meta{Escape}, if it precedes a command to be executed
+in "\CodeOutput". That is, suppose "\VerbCommand{!}{(}{)}", then "!foo\foo" is a very
+bad idea in your code, \cox[6pt](70,3cm,0pt,Mind my word,\\don't use it)while "!foo()\foo" is ok.
+All the comments in the examples here are done with "\VerbCommand".
+
+Since numbered examples environment define the current label to be the number
+of the current line, an interesting application is to use "\label" to refer to it.
+
+
+
+
+\UndoVerbCommand
+\begin{sidebyside}
+\VerbCommand!()
+
+(Everything is normal here!)
+\RenewExample[numbered]{example}¨{\ttfamily#}{#}{}
+\LineNumber{example}{}{1cm}
+
+\begin{example}
+\TeX !underline(\Tex!TeX)
+%Second line !label(myline)
+\end{example}
+
+\CodeInput
+
+gives \CodeOutput and the label is ¨on line \ref{myline}.
+\end{sidebyside}
+\VerbCommand§¤£
+
+
+\DescribeMacro{\CodeEscape\marg{Character}}\label{CodeEscape}
+\DescribeMacro\UndoCodeEscape
+In normal mode, this command does absolutely nothing. However, in produce
+mode, \meta{Character} becomes an escape character to form control sequences
+that will be expanded when writing to the file under production. It's useful
+mainly to put the values defined by "\ProduceFile" somewhere in your file. For
+instance, the following code
+
+\trycolorfalse\let\incolor\redcolor
+\csize15cm
+\begin{ex0}
+\CodeEscape!
+\ProduceFile{mypack.sty}[mypack][v.2.1][2009/02/24]
+
+\begin{code}
+\ProvidesPackage{!FileName}[!FileDate!space !FileVersion!space My super package.]
+\end{code}
+\end{ex0}
+
+\noindent\cox(210,14cm,3.5cm,invisible...) will write "\ProvidesPackage{mypack}[2009/02/24 v.2.1 My super package.]"
+to "mypack.sty".
+
+
+\subsection{Using \textsf{fancyvrb}}
+\CD\ is minimally compatible with \textsf{fancyvrb}, in the sense that
+verbatim characters defined and undefined with "\DefineShortVerb"
+and "\UndefineShortVerb" are recognized in produce mode (hopefully). Besides, verbatim environments
+defined with "\DefineVerbatimEnvironment" are automatically added to the list
+of dangerous environments. The environments offered by \textsf{fancyvrb} and
+the \textsf{fvrb-ex} companion package already belong to that list.
+
+You can even redefine the "code" environment with \textsf{fancyvrb} facilities.\footnote{%
+It will indeed add \texttt{code} to the list of dangerous environment, which is already
+the case when \texttt{code} is redefined with \texttt{$\backslash$RenewExample}. But \CD\ evaluates
+whether an environment is \texttt{code} before checking the list of dangerous environments.}
+However:
+
+\noindent\llap{\textbullet\ }"\ShortCode" will stick to the last style defined
+for "code" (if it is set to follow this environment).
+
+\noindent\llap{\textbullet\ }Since everything is gobbled after "\begin{code}"
+in produce mode, you can freely put your \textsf{keyval} pairs here, as usual
+with \textsf{fancyvrb}. However, \emph{you should not input these pairs on
+the following line(s)}, although it's ok with \textsf{fancyvrb}. The following
+code will lead "xleftmargin=1cm]" to be written on the file under production.
+
+
+\csize5cm
+\begin{ex0}
+\begin{code}[frame=single,
+xleftmargin=1cm]
+\def\foo{FOO}
+\end{code}
+\end{ex0}
+
+\noindent\llap{\textbullet\ }The "gobble" and "commandchars" parameters will
+be obeyed in normal mode (since \textsf{fancyvrb} is in charge), but \emph{not
+in produce mode, unless you also specify the} "\Gobble" \emph{and}
+"\VerbCommand" \emph{parameters (see above) accordingly}.
+
+
+
+\section{Summary of commands}
+
+In this section I explain the behavior of all \CD\ constructions in normal and
+produce mode respectively. Commands which have some effect in produce mode are
+subject to the restrictions given in section~\ref{dangerous}.
+
+\newcommand\NM{\textbf{Normal Mode: }}
+\newcommand\PM{\par\noindent\bgroup\def\par{\egroup\endgraf}\itshape\textbf{Produce Mode: }}
+\newcommand\NMX{\textbf{Normal Mode: }Does nothing.\par}
+\newcommand\PMX{\par\noindent\textit{\textbf{Produce Mode: }Does nothing.}\par}
+\let\PrintMacro\OneMac\let\macrotopskip\relax
+\small
+
+\subsection{Class options}
+
+\PrintMacro{autoclose}
+\NMX
+\PM The current file is closed when a new one is opened with "\ProduceFile".
+
+\PrintMacro{index}
+\NM Loads \textsf{makeidx} and calls "\makeindex". "\StopHere" automatically
+launches "\printindex".
+\PMX
+
+\PrintMacro{noheader}
+\NMX
+\PM No header is written to the file when it is opened.
+
+\PrintMacro{obeystop}
+\NM The document stops at "\StopHere"\marg{Code} and executes
+\meta{Code}. If the "index" option is on, "\printindex" is
+executed after \meta{Code}.
+\PMX
+
+\PrintMacro{tracing0, tracing1, tracing2}
+\NMX
+\PM \CD\ normally writes a report to the log file. If "tracing0"
+is on, there's no report; if "tracing1" is on (which is default),
+\CD\ reports only about opening files and writing code. With
+"tracing2", it also reports about characters defined as 
+"\ShortVerb" or "\CodeEscape", environments added to the
+list of dangerous environments, etc.
+
+\subsection{Environments}
+
+
+\DescribeEnvironment{code}
+\NM The content is displayed verbatim according to the style
+defined for "code".
+\PM The content is written to the file in production.
+
+\DescribeEnvironment{example}
+\NM A minimal example environment that provides "\CodeInput"
+(in typewriter font) and "\CodeInput".
+\PM The content is skipped.
+
+\DescribeEnvironment{invisible}
+\NM The content is skipped.
+\PM The content is written to the file in production.
+
+\subsection{Commands}
+
+\DescribeMacro\AddBlankLine
+\NMX
+\PM Adds a blank line to the file in production.
+
+\DescribeMacro\bslash
+\NM Prints \bslash. Designed to adapt to \textsf{hyperref}'s bookmarks.
+\PMX
+
+\DescribeMacro{\BoxTolerance\marg{Dimension}}
+\NM Excess size tolerated before a verbatim line is
+reported as an overfull box.
+\PMX
+
+\DescribeMacro{\CloseFile\marg{File}}
+\NM "\FileName" and others are not available anymore.
+\PM Closes \meta{File}. No file is considered in
+production until the next "\ProduceFile", even if
+there are open files. Useless in "autoclose" mode.
+
+\DescribeMacro{\CodeEscape\marg{Character}}
+\NMX
+\PM \meta{Character} turns into an escape character in
+"code" contexts.
+
+\DescribeMacro{\CodeFont\marg{Font specifications}}
+\NM The style of the "code" environment if it has not
+been redefined with "\RenewExample". Default is
+"\ttfamily".
+\PMX
+
+\DescribeMacro\CodeInput
+\NM Displays the code of the last example environment
+verbatim, according to the style defined for that
+environment.
+\PMX
+
+\DescribeMacro\CodeOutput
+\NM Executes the code of the last example environment,
+according to the style defined for that environment.
+\PMX
+
+\DescribeMacro{\DangerousEnvironment\marg{List of environments}}
+\NMX
+\PM The environments in the list are skipped during processing.
+
+\DescribeMacro{\DefineEnvironment\marg{Environment}}
+\NM Prints \meta{Environment} according to "\PrintMacro" and adds
+it to the index with `(environment)' and a line number typeset
+according to "\DefineIndexFont".
+\PM Gobbles the first characters of \meta{Environment}, just in case.
+
+\DescribeMacro{\DefineIndexFont\marg{Font specifications}}
+\NM Style of the page number in the index for "\DefineMacro"
+and "\DefineEnvironment" entries.
+\PMX
+
+\DescribeMacro{\DefineMacro\marg{Macro}}
+\NM Prints \meta{Macro} according to "\PrintMacro" and adds
+it to the index with a line number typeset according to "\DefineIndexFont".
+\PM Gobbles the first characters of \meta{Macro}, just in case.
+
+\DescribeMacro{\DescribeEnvironment\marg{Environment}}
+\NM Prints \meta{Environment} according to "\PrintMacro" and adds
+it to the index with `(environment)' and a line number typeset
+according to "\DescribeIndexFont".
+\PM Gobbles the first characters of \meta{Environment}, just in case.
+
+\DescribeMacro{\DescribeIndexFont\marg{Font specifications}}
+\NM Style of the page number in the index for "\DescribeMacro"
+and "\DescribeEnvironment" entries.
+\PMX
+
+\DescribeMacro{\DescribeMacro\marg{Macro}}
+\NM Prints \meta{Macro} according to "\PrintMacro" and adds
+it to the index with a line number typeset according to "\DescribeIndexFont".
+\PM Gobbles the first characters of \meta{Macro}, just in case.
+
+\DescribeMacro\DocStripMarginpar
+\NM Sets the adequate values for the proper printing of macros
+with "\DescribeMacro" and "\DefineMacro" (and variants for environments),
+so that they appear "\marginpar"'ed as with \textsf{DocStrip}.
+More precisely, it executes "\reversmarginpar", and sets "\marginparpush"
+to "0pt" and "\marginparwidth" to "8pc".
+\PMX
+
+\DescribeMacro\eTeXOff
+\NM All subsequent example environments are processed with an
+external file, whose extension is~".exp".
+\PMX
+
+\DescribeMacro\eTeXOn
+\NM All subsequent example environments are processed without an
+external file. This is default. (Requires \eTeX, of course.)
+\PMX
+
+\DescribeMacro{\Gobble\marg{Number}}
+\NM The number of characters that will be gobbled at the beginning
+of each example and code environments. In case of a blank line, nothing
+is gobbled, but a blank line is added. Tab characters count as one character.
+\PM Same as in normal mode, but when writing to the file in production.
+
+\DescribeMacro{\Header\marg{Text}}
+\NMX
+\PM Text to be written at the beginning of a file when it is opened
+with "\ProduceFile". Comment characters will be automatically added
+at the beginning of each line. Ends of lines are obeyed. If the "noheader"
+option is on, nothing is written.
+
+\DescribeMacro{\IgnorePrefix\marg{Macro prefix}}
+\NM Ignores \meta{Macro prefix} when sorting index entries generated
+by "\DescribeMacro" and "\DefineMacro". \meta{Macro prefix} will be
+typeset according to "\PrintPrefix" in the index.
+\PMX
+
+\DescribeMacro{\LineNumber\marg{Name}\marg{Font specifications}\marg{Width}\oarg{Number}}
+\NM The line number of \meta{Name} will be typeset according to
+\meta{Font specifications} in a box that will spread from the left\cox(270,-4.5cm,12pt,What???)
+margin into the main text width by a length of \meta{Width} (0pt by default).
+The next \meta{Name} will start at \meta{Number} if specified.
+\PMX
+
+\DescribeMacro{\marg\marg{Argument}}
+\NM "\marg{Argument}" prints \marg{Argument} (mandatory argument).
+\PMX
+
+\DescribeMacro{\meta\marg{Argument}}
+\NM "\meta{Argument}" prints \meta{Argument}.
+\PMX
+
+\DescribeMacro{\NewExample\oarg{Options}\marg{Name}\marg{Code input}\marg{Code output}\marg{Immediate execution}}
+\NM Creates \meta{Name} as an example environment to provide
+"\CodeInput" as \meta{Code input} (where the code to be typeset
+is represented by "#") and "\CodeOutput" as \meta{Code output}
+(where the code to be executed is represented by "#"). When
+encountered, \meta{Name} executes \meta{Immediate execution}.
+\meta{Code input}, \meta{Code output} and \meta{Immediate execution}
+can be empty.\\
+Options are:\\
+\texttt{numbered:} Each line of \meta{Name} is numbered.\\
+\texttt{continuous:} Each line of \meta{Name} is numbered and numbering
+continues from one \meta{Name} to the other.\\
+\texttt{visibleEOL:} If \meta{Name} is processed with \eTeX,
+This prevents ends of lines and commented parts of lines from being removed
+before anything is executed in "\CodeInput". See page \pageref{visibleEOL}
+for a discussion.
+\PM Adds \meta{Name} to the list of dangerous environments and gobbles
+the remaining arguments.
+
+\DescribeMacro{\oarg\marg{Argument}}
+\NM "\oarg{Argument}" prints \oarg{Argument} (optional argument).
+\PMX
+
+\DescribeMacro{\parg\marg{Argument}}
+\NM "\parg{Argument}" prints \parg{Argument} (picture argument).
+\PMX
+
+\DescribeMacro{\PrintMacro\marg{Macro or environment}}
+\NM Typesets the argument to "\DescribeMacro", "\DefineMacro",
+"\DescribeEnvironment" and "\Defi§-neEnvironment". Should be freely
+redefined by users. By default, it prints its argument as with
+\textsf{DocStrip}, provided "\DocStripMarginpar" has been executed
+beforehand.
+\PMX
+
+\DescribeMacro{\PrintPrefix\marg{Macro prefix}}
+\NM Typesets \meta{Macro prefix}, as defined by "\IgnorePrefix",
+in the index.
+Should be redefined by the user. By default, it does nothing.
+\PMX
+
+\DescribeMacro{\ProduceFile\marg{File}\oarg{File name}\oarg{File version}\oarg{File date}}
+\NM Provides \meta{File} as "\FileSource", \meta{File name} as "\FileName",
+\meta{File version} as "\FileVersion" and \meta{File date} as "\FileDate".
+\PM Opens \meta{File} and writes the header (unless "noheader" is on),
+unless \meta{File} is already open and "autoclose" is not specified, in
+which case \CD\ will simply puts \meta{File} back in production. Subsequent code
+will be written to this file. Closes the current file if "autoclose" is on.
+Provides \meta{File name} as "\FileName",
+\meta{File version} as "\FileVersion" and \meta{File date} as "\FileDate",
+to be used with "\CodeEscape".
+
+\DescribeMacro{\RenewExample\oarg{Options}\marg{Name}\marg{Code input}\marg{Code output}\marg{Immediate execution}}
+\NM Same as "\NewExample" to redefine \meta{Name}.
+\PM Adds \meta{Name} to the list of dangerous environments and gobbles
+the remaining arguments.
+
+\DescribeMacro{\ShortCode\marg{Character}}
+\NM Turns \meta{Character} into a shorthand for "\begin{document}"
+and "\end{document}".
+\PM Like in normal mode: everything between two \meta{Characters}
+will be written to the file in production.
+
+\DescribeMacro{\ShortVerb\marg{Character}}
+\NM Turns \meta{Character} into a shorthand for "\verb".
+\PM Subsequently gobbles everything between two \meta{Characters}.
+
+\DescribeMacro\StartIgnore
+\NMX
+\PM Stops executing anything until "\StopIgnore".
+
+\DescribeMacro{\StopHere\marg{Code}}
+\NM If the "obeystop" option is on, executes
+\meta{Code} followed by "\printindex" if "index" is on, and
+ends the document.
+\PMX
+
+\DescribeMacro\StopIgnore
+\NMX
+\PM Marks the end of "\StartIgnore".
+
+\DescribeMacro{\TabSize\marg{Number}}
+\NM Sets the number of spaces to represent a tab character
+in verbatim contexts.
+\PMX
+
+\DescribeMacro\UndoCodeEscape
+\NMX
+\PM Sets the "\CodeEscape" character to a normal character.
+
+\DescribeMacro\UndoShortCode
+\NM Sets the "\ShortCode" character to a normal character.
+\PM Sets the "\ShortCode" character to a normal character.
+
+\DescribeMacro\UndoShortVerb
+\NM Sets the "\ShortVerb" character to a normal character.
+\PM Sets the "\ShortVerb" character to a normal character.
+
+\DescribeMacro\UndoVerbBreak
+\NM Sets the "\VerbBreak" character to a normal character.
+\PM Sets the "\VerbBreak" character to a normal character.
+
+\DescribeMacro\UndoVerbCommand
+\NM Sets the "\VerbCommand" characters to normal characters.
+\PM Sets the "\VerbCommand" character to normal characters.
+
+\DescribeMacro{\VerbBreak\marg{Character}}
+\NM Turns \meta{Character} into a line breaker in verbatim
+contexts; more precisely, the line will break where \meta{Character}
+appears and will be indented with the same amount of space as the
+original one. \meta{Character} is ignored in "\CodeOutput".
+\PM Ignores \meta{Character} when writing to the file in production.
+
+\DescribeMacro{\VerbCommand\marg{Escape}\marg{Left brace}\marg{Right brace}}
+\NM Turns \meta{Escape} into an escape character in verbatim contexts,
+and \meta{Left brace} and \meta{Right brace} into characters of category
+1 and 2 respectively. In "\CodeOutput", \meta{Escape} gobbles all subsequent
+letters and everything between \meta{Left brace} and \meta{Right brace}
+is gobbled too.
+\PM Does the same as normal mode for "\CodeOutput". Letters following
+\meta{Escape} are gobbled, as is everything between \meta{Left brace}
+and \meta{Right brace}.
+
+\normalsize
+\StopHere{%
+\def\section*#1{\part{#1}
+\itshape
+This index was generated by the \emph{\texttt{\bslash DescribeMacro}}-like
+commands. It only reports where macros are described (page numbers in
+normal font) and defined (page numbers in italics).
+In the current version, \CD\ does not index macros when used in the code.
+
+Entries are sorted ignoring the \emph{\texttt{cd@}} and \emph{\texttt{cd@@}} prefixes.\vskip1em}%
+\catcode`\Z=0\relax%
+\let\partname\relax%
+\let\thepart\relax}
+
+\part{Implementation}
+\newskip\codeskip
+\newskip\printskip
+\codeskip=2cm
+\newskip\boxskip
+\boxskip=2cm
+\RenewExample[continuous]{code}%
+	{\let\noindent\relax\color{\maccolor}\ttfamily\small#}{}%
+	{\par\leftskip\codeskip\vskip.5em\CodeInput\vskip.5em\goodbreak}
+\LineNumber{code}{\footnotesize\rmfamily}{0pt}[1]
+\DocStripMarginpar
+\def\PrintMacro#1{%
+	\noindent%
+	\marginpar{%
+		\raggedleft\strut\ttfamily\small\hbox to\boxskip{%
+			\printskip\codeskip%
+			\advance\printskip1.6cm%
+			\hbox to\printskip{\hfil#1}\hss}}\ignorespaces}
+\everypar{\hangindent\codeskip\hangafter0\relax}
+\ShortCode/
+\BoxTolerance{10cm}
+\let\Section\section
+\let\Subsection\subsection
+\let\Subsubsection\subsubsection
+\def\section#1{\Section{#1}\everypar{\hangindent\codeskip\hangafter0\relax}\noindent\ignorespaces}
+\def\subsection#1{\Subsection{#1}\everypar{\hangindent\codeskip\hangafter0\relax}\noindent\ignorespaces}
+\def\subsubsection#1{\Subsubsection{#1}\everypar{\hangindent\codeskip\hangafter0\relax}\noindent\ignorespaces}
+
+\noindent The usual things (";" is my "\CodeEscape" character). Turning "^^?" into
+an active character is less usual but useful to delimit ends of code material.
+\CodeEscape;
+
+
+
+/
+\NeedsTeXFormat{LaTeX2e}
+\ProvidesClass{;FileName}[;FileDate ;FileVersion Code and documentation in one file.]
+\makeatletter
+\catcode`\^^?=13
+/\AddBlankLine
+\UndoCodeEscape
+
+
+\section{Options and basic definitions}
+\DefineMacro\cd@GetClass
+Options are mostly conditional switching. "\cd@tracingmode" will
+be used in an "\ifcase" statement. "\cd@GetClass" will be analyzed
+to retrieve the class and its options.
+
+
+/
+\newif\ifcd@produce
+\newif\ifcd@autoclose
+\newif\ifcd@obeystop
+\newif\ifcd@makeindex
+\newif\ifcd@noheader
+\newcount\cd@tracingmode
+\cd@tracingmode1
+\def\cd@GetClass{article()}
+
+\DeclareOption{autoclose}{\cd@autoclosetrue}
+\DeclareOption{produce}{\cd@producetrue}
+\DeclareOption{index}{\cd@makeindextrue}
+\DeclareOption{obeystop}{\cd@obeystoptrue}
+\DeclareOption{noheader}{\cd@noheadertrue}
+\DeclareOption{tracing0}{\cd@tracingmode0}
+\DeclareOption{tracing1}{\cd@tracingmode1}
+\DeclareOption{tracing2}{\cd@tracingmode2}
+\DeclareOption*{\edef\cd@GetClass{\CurrentOption()}}
+\ProcessOptions\relax
+/\AddBlankLine
+
+
+
+\DefineMacro\cd@end
+\DefineMacro\cd@LoadClass
+\DefineMacro\cd@GetOptions
+We define "\cd@LoadClass" as a recursive retrieval of options,
+then passed to the class with "\PassOptionsToClass", which we load.
+This is done only if we're not in produce mode, in which case no
+class is loaded.
+/
+\def\cd@end{cd@end}
+\ifcd@produce
+\else
+\def\cd@LoadClass#1(#2){%
+	\def\cd@Class{#1}
+	\expandafter\cd@GetOptions#2;cd@end;%
+	\LoadClass{#1}%
+	\@ifnextchar({\expandafter\@gobble\@gobble}{}}
+\def\cd@GetOptions#1;{%
+	\def\cd@TempArg{#1}
+	\ifx\cd@TempArg\cd@end%
+		\let\cd@next\relax
+	\else%
+		\PassOptionsToClass{#1}{\cd@Class}%
+		\let\cd@next\cd@GetOptions%
+	\fi\cd@next}
+\expandafter\cd@LoadClass\cd@GetClass
+/\AddBlankLine
+
+\DefineMacro\StopHere
+Still in normal mode, we load \textsf{makeidx} if required
+and define "\StopHere" accordingly.
+/
+\ifcd@makeindex
+	\RequirePackage{makeidx}
+	\makeindex
+\else
+	\let\printindex\relax
+\fi
+\ifcd@obeystop
+	\ifcd@makeindex
+		\long\def\StopHere#1{#1\relax\par\printindex\end{document}}
+	\else
+		\long\def\StopHere#1{#1\relax\par\end{document}}
+	\fi
+\else
+	\long\def\StopHere#1{}
+\fi
+\fi
+/\AddBlankLine
+
+\section{Normal mode}
+Although the following code is used in normal mode only,
+I did not feel like embedding hundreds of lines under a "\ifcd@produce"
+conditional. Pure superstition, perhaps.
+
+Here's the switch for \eTeX\ and some shorthands.
+/
+\newif\ifcd@eTeX
+\@ifundefined{eTeXversion}{\cd@eTeXfalse}{\cd@eTeXtrue}
+
+\def\cd@Warning{\ClassWarningNoLine{codedoc}}
+\def\cd@Error#1{\ClassError{codedoc}{#1}{}}
+/\AddBlankLine
+
+\subsection{Describing macros}
+
+\DefineMacro\DocStripMarginpar
+\DefineMacro\PrintMacro
+Most of the following macros are imitated from \textsf{DocStrip},
+in a simpler but less careful manner. The first two are straightforward.
+/
+\def\DocStripMarginpar{\reversemarginpar\marginparpush0pt\relax\marginparwidth8pc\relax}
+\def\PrintMacro#1{\noindent\marginpar{\raggedleft\strut\ttfamily#1}\ignorespaces}
+/\AddBlankLine
+
+\DefineMacro\DescribeIndexFont
+\DefineMacro\DescribeMacro
+\DefineMacro\cd@DescribeMacro
+\DefineMacro\DescribeEnvironment
+\DefineMacro\cd@DescribeEnvironment
+
+\DefineMacro\DefineIndexFont
+\DefineMacro\DefineMacro
+\DefineMacro\cd@DefineMacro
+\DefineMacro\DefineEnvironment
+\DefineMacro\cd@DefineEnvironment
+\vskip-24pt\noindent"\DescribeMacro" and its companions first turn "@" into a letter,
+so that a control sequence containing it is recognized as such,
+sets "\cd@Index", used in the "\ifcase" statement below (a simple
+conditional could do the job, since there are only two values,
+but there might be more someday if one wants to distinguish
+other index entries, like `used' macros), and pass their
+arguments to "\PrintMacro" with the first token "\string"'ed
+(even in the case of an environment, because someone might
+describe its environment with a "\begin{myenv}" command).
+In case of a macro, the argument is also passed to "\cd@MakeEntry"
+to index it.
+
+The \textsf{hyperref} package does not work properly with indexes
+if a style is specified with "|" in the entry. Since we use such
+styles, and since we want to use \textsf{hyperref}, we circumvent
+the problem with "\hyperpage" added to the style. By default, it
+does nothing, but if the user loads \textsf{hyperref}, it will
+have the adequate meaning.
+/
+\newcount\cd@Index
+\def\hyperpage#1{#1}
+
+\def\DescribeIndexFont#1{\gdef\cdatDescribeFont##1{{#1\hyperpage{##1}}}}
+\DescribeIndexFont{}
+\def\DescribeMacro{\makeatletter\cd@DescribeMacro}
+\def\cd@DescribeMacro#1{%
+	\makeatother%
+	\cd@Index=0 %
+	\cd@MakeEntry#1\cd@EndOfEntry%
+	\PrintMacro{\string#1}}
+\def\DescribeEnvironment{\makeatletter\cd@DescribeEnvironment}
+\def\cd@DescribeEnvironment#1{%
+	\makeatother%
+	\index{#1@\texttt{#1} (environment)|cdatDescribeFont}%
+	\PrintMacro{\string#1}}
+
+\def\DefineIndexFont#1{\gdef\cdatDefineFont##1{{#1\hyperpage{##1}}}}
+\DefineIndexFont{\itshape}
+\def\DefineMacro{\makeatletter\cd@DefineMacro}
+\def\cd@DefineMacro#1{%
+	\makeatother%
+	\cd@Index1 %
+	\cd@MakeEntry#1\cd@EndOfEntry%
+	\PrintMacro{\string#1}}
+\def\DefineEnvironment{\makeatletter\cd@DefineEnvironment}
+\def\DefineEnvironment#1{%
+	\makeatother%
+	\index{#1@\texttt{#1} (environment)|cdatDefineFont}%
+	\PrintMacro{\string#1}}
+/\AddBlankLine
+
+\DefineMacro\cd@MakeEntry
+This takes two arguments but considers only the first one,
+so that "\DescribeMacro{\foo\marg{Argument}}" will
+ignore "\marg{Argument}". We pass that argument to "\cd@AnalyzeEntry"
+with the escape character removed (for a proper indexing),
+call "\cd@AnalyzePrefix" on the result and finally "\cd@@MakeEntry"
+/
+\def\cd@MakeEntry#1#2\cd@EndOfEntry{%
+	\def\cd@TempEntry{}%
+	\begingroup\escapechar\m@ne\expandafter\cd@AnalyzeEntry\string#1\cd@end\endgroup%
+	\expandafter\cd@AnalyzePrefix\cd@TempEntry\cd@end%
+	\expandafter\cd@@MakeEntry\cd@TempEntry\cd@EndOfEntry}/
+
+\DefineMacro\cd@AnalyzeEntry
+\DefineMacro\AtChar
+The aim of this macro is to process "@". Indeed, "@"
+is \textsf{MakeIndex}'s operator to signal that an entry
+should be indexed under another name (as done here). But
+"@" is also a very popular letter in \TeX's world when it
+comes to macros. \textsf{DocStrip}'s solution is to create
+a special style file for \textsf{MakeIndex}, so that the
+function of "@" is taken over by another character. But
+then, when a user compiles a \textsf{DocStrip} document,
+this style file must be indicated to \textsf{MakeIndex},
+which many people might not do. So I prefer to leave
+\textsf{MakeIndex} alone and process the entry beforehand,
+replacing "@" by a character denotation. That's the job
+of "\cd@AnalyzeEntry", which scans the macro name token
+by token and replace "@" by "\AtChar".
+/
+\chardef\AtChar=`\@
+\def\cd@AnalyzeEntry#1{%
+	\let\cd@next\cd@AnalyzeEntry%
+	\ifx#1\cd@end%
+		\let\cd@next\relax%
+	\else\if#1@%
+		\expandafter\gdef\expandafter\cd@TempEntry\expandafter{\cd@TempEntry\AtChar}%
+	\else%
+		\expandafter\gdef\expandafter\cd@TempEntry\expandafter{\cd@TempEntry#1}%
+	\fi\fi\cd@next}
+/\AddBlankLine
+
+\DefineMacro\IgnorePrefix
+Here comes the mechanism to remove prefixes when sorting entries.
+"\IgnorePrefix" simply resets%
+\cox[1pt](0,-3.7cm,8pt,\hskip-.4cm\raise3pt\hbox{{\normalsize\ttfamily\bslash}\hskip.5cmI am a macro})
+some values and call "\cd@IgnorePrefix" on its argument along with a terminator.
+/
+\newcount\cd@PrefixCount
+\def\IgnorePrefix#1{\cd@PrefixCount\z@\def\Prefix{}\cd@IgnorePrefix#1\cd@end}
+/
+
+\DefineMacro\cd@IgnorePrefix
+\DefineMacro\cd@MakePrefix
+This analyzes the prefix just like "\cd@AnalyzeEntry" above and
+replaces all occurrences of "@" by "\AtChar". Since the name
+of the macro is "\string"'ed when subjected to "\DefineMacro"
+and others, we also "\string" all letters of the prefix, which have then
+category code 12. 
+/
+\def\cd@IgnorePrefix#1{%
+	\let\cd@next\cd@IgnorePrefix%
+	\ifx#1\cd@end%
+		\def\cd@next{\expandafter\cd@ScanPrefix\Prefix\cd@end}%
+	\else\if#1@%
+		\expandafter\def\expandafter\Prefix\expandafter{\Prefix\AtChar}%
+	\else%
+		\edef\cd@PrefixLetter{\string#1}%
+		\expandafter\cd@MakePrefix\cd@PrefixLetter%
+	\fi\fi\cd@next}
+\def\cd@MakePrefix#1{%
+	\expandafter\def\expandafter\Prefix\expandafter{\Prefix#1}}%
+/
+
+\DefineMacro\cd@ScanPrefix
+\DefineMacro\cd@DefPrefix
+\DefineMacro\cd@AnalyzePrefix
+Then we just scan the prefix to compute the number of
+characters it is made of. "\cd@Analy§-zePrefix" is defined
+accordingly to take the right number of characters out of 
+a macro name (fed in "\cd@MakeEntry" above) and
+lump them into "\cd@TempPrefix", and define the rest of the
+entry as the remaining characters up to the terminator.
+/
+\def\cd@ScanPrefix#1{%
+	\ifx#1\cd@end%
+		\let\cd@next\cd@DefPrefix%
+	\else%
+		\advance\cd@PrefixCount\@ne%
+		\let\cd@next\cd@ScanPrefix%
+	\fi\cd@next}
+\def\cd@DefPrefix{%
+	\ifcase\cd@PrefixCount%
+		\def\cd@AnalyzePrefix##1\cd@end{}%
+	\or\def\cd@AnalyzePrefix##1##2\cd@end{%
+		\def\cd@TempPrefix{##1}\def\cd@RestOfEntry{##2}\cd@ComparePrefix}%
+	\or\def\cd@AnalyzePrefix##1##2##3\cd@end{%
+		\def\cd@TempPrefix{##1##2}\def\cd@RestOfEntry{##3}\cd@ComparePrefix}%
+	\or\def\cd@AnalyzePrefix##1##2##3##4\cd@end{%
+		\def\cd@TempPrefix{##1##2##3}\def\cd@RestOfEntry{##4}\cd@ComparePrefix}%
+	\or\def\cd@AnalyzePrefix##1##2##3##4##5\cd@end{%
+		\def\cd@TempPrefix{##1##2##3##4}\def\cd@RestOfEntry{##5}\cd@ComparePrefix}%
+	\or\def\cd@AnalyzePrefix##1##2##3##4##5##6\cd@end{%
+		\def\cd@TempPrefix{##1##2##3##4##5}\def\cd@RestOfEntry{##6}\cd@ComparePrefix}%
+	\or\def\cd@AnalyzePrefix##1##2##3##4##5##6##7\cd@end{%
+		\def\cd@TempPrefix{##1##2##3##4##5##6}\def\cd@RestOfEntry{##7}\cd@ComparePrefix}%
+	\or\def\cd@AnalyzePrefix##1##2##3##4##5##6##7##8\cd@end{%
+		\def\cd@TempPrefix{##1##2##3##4##5##6##7}\def\cd@RestOfEntry{##8}\cd@ComparePrefix}%
+	\or\def\cd@AnalyzePrefix##1##2##3##4##5##6##7##8##9\cd@end{%
+		\def\cd@TempPrefix{##1##2##3##4##5##6##7##8}\def\cd@RestOfEntry{##9}\cd@ComparePrefix}%
+	\fi\ignorespaces}
+/
+
+\DefineMacro\cd@ComparePrefix
+Comparing prefixes is simply a matter of string testing.
+In case they match, the entry is redefined as the "\cd@RestOfEntry",
+so that macros will be indexed with the prefix removed.
+/
+\newif\ifcd@Prefix
+\def\cd@ComparePrefix{%
+	\ifx\cd@TempPrefix\Prefix%
+		\expandafter\def\expandafter\cd@TempEntry\expandafter{\cd@RestOfEntry}%
+		\cd@Prefixtrue%
+	\else%
+		\cd@Prefixfalse%
+	\fi}
+/
+
+\IgnorePrefix{cd@@}
+\DefineMacro\cd@@MakeEntry
+\IgnorePrefix{cd@}
+\DefineMacro\PrintPrefix
+Finally, "\cd@@MakeEntry" indexes the macro under its
+name with a prefixed escapechar (since it was removed
+above) and "\Prefix" in case it was found to match. We also
+set some default values.
+/
+\def\cd@@MakeEntry#1\cd@EndOfEntry{%
+	\ifcd@Prefix%
+		\ifcase\cd@Index%
+			\index{#1@\texttt{\char\escapechar\PrintPrefix\Prefix#1}|cdatDescribeFont}%
+		\or%
+			\index{#1@\texttt{\char\escapechar\PrintPrefix\Prefix#1}|cdatDefineFont}%
+		\fi%
+	\else%
+	\ifcase\cd@Index%
+			\index{#1@\texttt{\char\escapechar#1}|cdatDescribeFont}%
+		\or%
+			\index{#1@\texttt{\char\escapechar#1}|cdatDefineFont}%
+		\fi%
+	\fi}
+
+\IgnorePrefix{}%
+\let\PrintPrefix\relax
+/\AddBlankLine
+
+\DefineMacro\meta
+\DefineMacro\marg
+\DefineMacro\oarg
+\DefineMacro\parg
+These again are imitated from the \textsf{DocStrip} bundle,
+with less care.
+/
+\def\meta#1{{\ensuremath\langle\emph{#1}\ensuremath\rangle}}
+\def\marg#1{\texttt{\{}\meta{#1}\texttt{\}}}
+\def\oarg#1{\texttt{[}\meta{#1}\texttt{]}}
+\def\parg#1{\texttt{(}\meta{#1}\texttt{)}}
+/
+
+\DefineMacro\cd@bslash
+\DefineMacro\bslash
+We define our backslash to adapt to \textsf{hyperref}.
+To this end, we use "\texorpdfstring", an \textsf{hyperref}
+command that expands to its first argument in normal contexts
+and to its second one in bookmarks.
+
+The only problem is that \textsf{hyperref} defines
+"\textorpdfstring" with "\newcommand" instead of "\def".
+So we obviously can't define it here, and we wait for the
+beginning of the document.
+/
+\def\cd@bslash{\char`\\}
+\def\bslash{\texorpdfstring{\cd@bslash}{\string\\}}
+\AtBeginDocument{\@ifundefined{texorpdfstring}{\def\texorpdfstring#1#2{#1}}{}}
+/
+
+\subsection{\texttt{\bslash ShortVerb} and associates}
+
+\DefineMacro\cd@CharErr
+\DefineMacro\cd@BadChar
+Before entering the intricate realm of verbatim text, here are some
+simpler definitions. First, we delimit what characters we consider to
+be acceptable in "\ShortVerb" and other. The choice might seem rather
+conservative, but things are less dangerous this way.
+
+/
+\def\cd@CharErr#1#2{%
+	\bgroup
+		\escapechar\m@ne
+		\cd@Error{You can't use \string#1 for \string\\#2}
+	\egroup}
+
+\newif\ifcd@BadChar
+
+\def\cd@BadChar#1#2{%
+	\cd@BadChartrue
+	\ifcase\catcode`#1 % \
+		\cd@CharErr{\\}{#2}%
+	\or% {
+		\cd@CharErr{\{}{#2}%
+	\or% }
+		\cd@CharErr{\}}{#2}%
+	\or% $
+		\cd@BadCharfalse%
+	\or% &
+		\cd@BadCharfalse%
+	\or% ^^M
+	\or% #
+		\cd@BadCharfalse%
+	\or% ^
+		\cd@BadCharfalse%
+	\or% _
+		\cd@BadCharfalse%
+	\or% Ignored
+	\or% Spaces
+		\cd@CharErr{spaces}{#2}%
+	\or% Letters
+		\cd@CharErr{letters}{#2. \MessageBreak That's really bad}%
+	\or% Other
+		\cd@BadCharfalse%
+	\or% Active
+		\cd@CharErr{#1}{#2 - it's already active}%
+	\or% %
+		\cd@CharErr{#1}{#2}%
+	\fi}
+/\AddBlankLine
+
+\DefineMacro\cd@UndoErr
+\DefineMacro\cd@DefErr
+We also define two templates for error messages in case
+the user wants to "\Undo..." something that was never done
+or define a new character while one is already in use.
+
+/
+\def\cd@UndoErr#1{%
+	\bgroup%
+		\escapechar\m@ne%
+		\cd@Error{%
+			There is no \string\\\string#1\space defined.\MessageBreak%
+			\string\\Undo\string#1\space on line \the\inputlineno\space is useless}%
+	\egroup}
+\def\cd@DefErr#1#2{%
+	\bgroup%
+	\escapechar\m@ne%
+		\expandafter\xdef\csname cd@#2Error\endcsname{%
+			\noexpand\cd@Error{%
+				You've already defined \string#1 as a \string\\#2\noexpand\MessageBreak%
+				on l. \the\inputlineno. You can't have two.\noexpand\MessageBreak%
+				Say \string\\Undo#2\space and then \string\\#2\space to change}}%
+	\egroup}
+/\AddBlankLine
+
+\DefineMacro\ShortVerb
+Before defining any character, we run some tests: is it a bad character,
+and is there another character already in use? In the latter case, "\ifcd@ShortVerb"
+should be switched to "true".
+/
+\newif\ifcd@ShortVerb
+
+\def\ShortVerb#1{%
+	\cd@BadChar{#1}{ShortVerb}%
+	\ifcd@BadChar%
+	\else\ifcd@ShortVerb
+		\cd@ShortVerbError
+/
+
+\noindent If none of the above applies, we switch the conditional to
+true define "\cd@ShortVerbError" with "\cd@DefErr". We also store
+the character's original catcode to restore if undone.
+/
+	\else
+		\cd@ShortVerbtrue
+		\cd@DefErr{#1}{ShortVerb}
+		\chardef\cd@ShortVerbCat\catcode`#1%
+/
+
+\noindent Then we use the "~" with lowercase trick to define
+the character.
+/
+		\bgroup%
+			\lccode`\~=`#1%
+			\lowercase{%
+/
+
+\noindent A "\ShortVerb" character makes the adequate modifications
+to display text verbatim. "\cd@Verbatim" is \CD's container of
+all such modifications (mostly catcode changing). "\catcode`#1=13"
+is necessary because the character might be one of the specials 
+whose catcode is changed in "\cd@Verbatim", e.g. "&". We also
+launch "\cd@ShortVerb" which works like "\verb".
+
+"\leavevmode" is needed in case the "\ShortVerb" character
+starts a paragraph, as in the one you're reading.
+/
+				\gdef~{\leavevmode\bgroup\ttfamily\cd@Verbatim\catcode`#1\active\cd@ShortVerb}%
+				\gdef\cd@ShortVerb##1~{##1\egroup}%
+/
+
+\noindent Finally we (re)define "\UndoShortVerb" to restore the original catcode
+and switch the appropriate conditional. Last but not least, we make the
+character active.
+/
+				\gdef\UndoShortVerb{%
+					\ifcd@ShortVerb%
+						\cd@ShortVerbfalse%
+						\catcode`~\cd@ShortVerbCat%
+					\else%
+						\cd@UndoErr{\ShortVerb}%
+					\fi}}%
+		\egroup%
+		\catcode`#1=13
+	\fi\fi}%
+/
+
+\DefineMacro\UndoShortVerb
+This is the default definition for this command, when no
+"\ShortVerb" has been defined.
+/
+\def\UndoShortVerb{\cd@UndoErr{\ShortVerb}}
+/\AddBlankLine
+
+\DefineMacro\ShortCode
+"\ShortCode" works with the same pattern as "\ShortVerb"
+with important variations. First, we check whether there's
+an optional argument.
+/
+\newif\ifcd@ShortCode
+\newif\ifcd@ShortCodeChar
+
+\def\ShortCode{%
+	\@ifnextchar[
+		{\cd@MakeShortCode}
+		{\cd@MakeShortCode[code]}}
+/
+
+\DefineMacro\cd@MakeShortCode
+Then we define the real macro. We store the name of
+the environment and run the same tests as above.
+/
+\bgroup
+\catcode`\^^M13%
+\gdef\cd@MakeShortCode[#1]#2{%
+	\def\cd@TempEnv{#1}%
+	\cd@BadChar{#2}{ShortCode}%
+	\ifcd@BadChar%
+	\else\ifcd@ShortCodeChar%
+		\cd@ShortCodeError%
+/
+
+\noindent Then we check whether the environment exists,
+thanks to "\"\meta{Environment}"@cd@EOL" which is defined
+for \meta{Environment} when created with "\NewExample".
+/
+	\else%
+		\expandafter\ifx\csname #1@cd@EOL\endcsname\relax%
+			\cd@Error{%
+				`#1' is not an example environment.\MessageBreak%
+				`code' is selected instead}%
+			\def\cd@TempEnv{code}%
+		\fi%
+/
+
+\noindent This is the same as above: we state that a character
+has been defined as a "\ShortCode".
+/
+		\cd@ShortCodeChartrue%
+		\cd@DefErr{#2}{ShortCode}%
+		\chardef\cd@ShortCodeCat=\catcode`#2%
+/
+
+\DefineMacro\cd@ShortCode
+\DefineMacro\cd@ShortEnd
+\DefineMacro\cd@ActivateShortCode
+\noindent Then we define the character to launch the appropriate
+environment, but with "\ifcd@Short§-Code" turned to true. What will
+happen depends on the status of the environment. If it is the
+default "code" environement, it will call "\cd@ShortCode" as
+defined here, which is equivalent to "\code" itself (see below).
+On the other hand, if the environment is an "example" environement,
+the special example macro will be called and delimit its argument
+with "\cd@ShortEnd", which is the "\ShortCode" character itself.
+"\cd@ActivateShortCode" is needed to reactivate the character
+in case it was one of the specials, as we did for "\ShortVerb".
+/
+		\bgroup%
+			\lccode`\~=`#2%
+			\lowercase{%
+			\gdef~{\cd@ShortCodetrue\csname\cd@TempEnv\endcsname}%
+			\gdef\cd@ShortEnd{~}%
+			\gdef\cd@ShortCode##1^^M##2~{\cd@StartGobble##2^^?\egroup}%
+			\gdef\cd@ActivateShortCode{\catcode`#2=13\relax}%
+/
+
+\DefineMacro\UndoShortCode
+The rest is equivalent to "\ShortVerb" above.
+/
+			\gdef\UndoShortCode{%
+				\ifcd@ShortCodeChar%
+					\catcode`~=\cd@ShortCodeCat\relax%
+					\let\cd@ActivateShortCode\relax%
+					\cd@ShortCodeCharfalse%
+				\else%
+					\cd@UndoErr{\ShortCode}%
+				\fi}}%
+		\egroup%
+		\catcode`#2=13 %
+	\fi\fi}%
+\egroup
+\def\UndoShortCode{\cd@UndoErr{\ShortCode}}
+/\AddBlankLine
+
+\DefineMacro\VerbBreak
+"\VerbBreak" starts as above.
+/
+\newif\ifcd@VerbBreak
+\newtoks\cd@@Everypar
+
+\def\VerbBreak#1{%
+	\cd@BadChar{#1}{VerbBreak}%
+	\ifcd@BadChar%
+	\else\ifcd@VerbBreak%
+		\cd@VerbBreakError%
+	\else\cd@VerbBreaktrue
+		\cd@DefErr{#1}{VerbBreak}%
+		\bgroup%
+			\lccode`\~`#1 %
+			\lowercase{%
+/
+
+\DefineMacro\cd@ActivateVerbBreak
+However, "\VerbBreak" characters become active
+only in verbatim contexts. We create "\cd@ActivateVerbBreak"
+to that end. When active the character stores the current
+value of "\everypar" and then empties it (because the broken
+line should start with nothing).
+/
+			\gdef\cd@ActivateVerbBreak{%
+				\catcode`#1\active%
+				\gdef~{%
+					\cd@@Everypar\everypar%
+					\everypar{}%
+/
+
+\noindent Then we set a scratch dimension to "\cd@FirstSpaces"
+times the width of a space in the current font. "\cd@FirstSpaces"
+is incremented by spaces and tabs at the beginning of each lines.
+In case the current environment is numbered, we increase our
+scratch dimension by the width of the box containing the number,
+stored in "\"\meta{Environment}"@cd@boxwidth".
+/
+					\dimen0=\cd@FirstSpaces\fontdimen2\font\relax%
+					\expandafter\ifx\csname\cd@ExampleName @cd@boxwidth\endcsname\relax%
+					\else%
+						\advance\dimen0 \csname\cd@ExampleName @cd@boxwidth\endcsname\relax%
+					\fi%
+/
+
+\noindent Finally, we create a paragraph, turn to horizontal mode, restore
+"\everypar" in its initial value and create a space of the desired
+width, namely the same as the space at the beginning of the original broken line.
+/
+					\endgraf\leavevmode\everypar\cd@@Everypar\hbox to\dimen0{\hss}}}}%
+		\egroup%
+/
+
+\DefineMacro\cd@IgnoreVerbBreak
+The character should be ignored in "\CodeOutput", and this
+is what we do here. The "\Undo..." variant simply sets these
+commands to "\relax".
+/
+		\def\cd@IgnoreVerbBreak{\catcode`#1=9\relax}%
+	\fi\fi}
+\def\UndoVerbBreak{%
+	\ifcd@VerbBreak%
+		\let\cd@ActivateVerbBreak\relax
+		\let\cd@IgnoreVerbBreak\relax
+		\cd@VerbBreakfalse
+	\else
+		\cd@UndoErr{\VerbBreak}
+	\fi}
+\let\cd@ActivateVerbBreak\relax
+/
+
+\DefineMacro\VerbCommand
+\DefineMacro\cd@ActivateVerbCommand
+\DefineMacro\cd@IgnoreVerbCommand
+\DefineMacro\UndoVerbCommand
+"\VerbCommand" is similar once again. We define
+"\cd@ActivateVerbCommand" to change the catcodes of the characters
+to 0, 1 and 2 in verbatim contexts and "\cd@IgnoreVerbCommand"
+to turn the second character into a command that gobbles 
+its argument, delimited by the third character. This is
+straightforward, but the first character is more complicated:
+it has to gobble letters and only letters.
+/
+\newif\ifcd@VerbCommand
+
+\def\VerbCommand#1#2#3{%
+	\cd@BadChar{#1}{VerbCommand}%
+	\cd@BadChar{#2}{VerbCommand}%
+	\cd@BadChar{#3}{VerbCommand}%
+	\ifcd@BadChar%
+	\else\ifcd@VerbCommand%
+		\cd@VerbCommandError
+	\else%
+		\cd@DefErr{#1, \string#2 and \string#3}{VerbCommand}
+		\cd@VerbCommandtrue%
+		\def\cd@ActivateVerbCommand{\catcode`#1=0 \catcode`#2=1 \catcode`#3=2\relax}%
+		\def\cd@IgnoreVerbCommand{%
+			\catcode`#1=13 %
+			\lccode`\~=`#1 %
+			\lowercase{\def~{\cd@GobbleLetters}}%
+			\catcode`#2=13 %
+			\lccode`\~=`#2 %
+			\lowercase{\def~####1#3{}}}%
+	\fi\fi}
+\def\UndoVerbCommand{%
+	\ifcd@VerbCommand%
+		\let\cd@ActivateVerbCommand\relax%
+		\let\cd@IgnoreVerbCommand\relax%
+		\cd@VerbCommandfalse%
+	\else%
+		\cd@UndoErr{\VerbCommand}%
+	\fi}%
+\let\cd@IgnoreVerbCommand\relax
+\let\cd@ActivateVerbCommand\relax
+/
+
+\DefineMacro\cd@GobbleLetters
+Gobbling letters is not a very delicate process. We
+take the next token, check whether it is of category
+11, and eat it away if it is the case. That's the reason
+why "\VerbCommand" is not very sound. If the next token
+happens to be a macro (as might be the case since in
+"\CodeOutput", since the escape character is turned back to 0),
+trying to evaluate its catcode is not a good idea.
+/
+\def\cd@GobbleLetters#1{\ifnum\catcode`#1=11 \expandafter\cd@GobbleLetters\else\expandafter#1\fi}
+/
+
+\DefineMacro\CodeEscape
+\DefineMacro\UndoCodeEscape
+Finally, "\CodeEscape" doesn't do much in normal mode.
+We simply check characters.
+/
+\newif\ifcd@CodeEscape%
+
+\def\CodeEscape#1{%
+	\cd@BadChar{#1}{CodeEscape}%
+	\ifcd@BadChar%
+	\else\ifcd@CodeEscape%
+		\cd@CodeEscapeError%
+	\else%
+		\cd@CodeEscapetrue%
+		\cd@DefErr{#1}{CodeEscape}%
+	\fi\fi}
+\def\UndoCodeEscape{%
+	\ifcd@CodeEscape%
+		\cd@CodeEscapefalse%
+	\else%
+		\cd@UndoErr{\CodeEscape}%
+	\fi}%
+/\AddBlankLine
+
+\subsection{Verbatim definitions}
+
+\DefineMacro\cd@SpaceChar
+Here comes the time to do some verbatim. We start
+with space. "\ifcd@Star" is the conditional switched
+to true if we're in a starred verbatim environment.
+We define the visible space character to be space
+of category 12 in typewriter font, as usual.\cox[12pt](110,0pt,0pt,Forget me not)
+/
+\newif\ifcd@Star
+\newif\ifcd@NewLine
+\newcount\cd@FirstSpaces
+
+\bgroup
+\catcode`\ 12%
+\gdef\cd@SpaceChar{\texttt{ }}%
+/\AddBlankLine
+
+\DefineMacro\cd@MakeSpace
+\DefineMacro\cd@ObeySpaces
+\noindent Since we want spaces at the beginning of
+a line to count how many they are, so that "\VerbBreak"
+can properly break the line, we don't equate the
+space character with "\@xobeysp" (\LaTeX's verbatim
+space) or "\cd@SpaceChar" directly; instead, "\cd@ObeySpaces"
+will print the space, being called by real spaces in
+"\cd@VerbTab" and "\cd@VerbSpace". ("^^I" denotes a
+tab character).
+
+/
+\catcode`\^^I=13\relax%
+\catcode`\ =13\relax%
+\gdef\cd@MakeSpace{%
+\ifcd@Star%
+\let\cd@ObeySpaces\cd@SpaceChar%
+\else%
+\let\cd@ObeySpaces\@xobeysp%
+\fi%
+\catcode`\ =13\relax%
+\catcode`\^^I=13\relax%
+\let =\cd@VerbSpace%
+\let^^I=\cd@VerbTab}%
+/
+
+\DefineMacro\cd@VerbSpace
+\DefineMacro\cd@VerbTab
+In verbatim contexts, a space takes the next
+character as an argument; in case "\ifcd@NewLine" is true,
+which it is at the beginning of every line (thanks to
+an "\everypar"), it increments "\cd@FirstSpaces",
+which is used by "\VerbBreak". A tab character does
+the same except that the "\cd@FirstSpaces" is increased
+by the value of "\TabSize" (stored in "\cd@TabSize").
+In case the next character is not a space or a tab, "\ifcd@NewLine"
+is set to false.
+
+Spaces leaves a "\cd@ObeySpaces" while tabs create an
+empty box of width "\TabSize" times the width of a space
+in the current font.
+/
+\gdef\cd@VerbSpace#1{%
+\cd@ObeySpaces%
+\ifcd@NewLine\advance\cd@FirstSpaces1\relax\fi%
+\ifx#1^^I\else\ifx#1 \else\cd@NewLinefalse\fi\fi#1}%
+\gdef\cd@VerbTab#1{%
+\leavevmode\hbox%
+to\cd@TabSize\fontdimen2\font{\hss}%
+\ifcd@NewLine\advance\cd@FirstSpaces\cd@TabSize\fi%
+\ifx#1^^I\else\ifx#1 \else\cd@NewLinefalse\fi\fi#1}
+\egroup
+/\AddBlankLine
+
+\DefineMacro\cd@Verbatim
+Here comes the verbatimizer. First, we cancel the
+parindent and sets "\hfuzz" to "\cd@Box§-Tolerance",
+which stores the argument of "\BoxTolerance".
+/
+\def\cd@Verbatim{%
+	\parindent\z@%
+	\hfuzz=\cd@BoxTolerance%
+/
+
+\noindent Then, if a "\ShortVerb" was defined, we
+undo it, so that it appears as any other character 
+in this context. If this verbatim was called by the
+"\ShortVerb" character itself, remember that it restores
+itself to 13.
+/
+	\ifcd@ShortVerb%
+		\UndoShortVerb%
+	\fi%
+/
+
+\noindent If we're not in a verbatim context called
+by "\ShortCode", we undo it, for the same reason.
+/
+	\ifcd@ShortCode%
+		\else%
+		\ifcd@ShortCodeChar%
+			\UndoShortCode%
+		\fi%
+	\fi%
+/
+
+\noindent We change the usual catcodes and reactivate
+the "\ShortCode" character, just in case it was changed
+by "\dospecials" or "\@noligs". We activate the verb break
+and the verb command, and the rest is straightforward.
+/
+	\let\do\@makeother\dospecials\@noligs%
+	\ifcd@ShortCode%
+		\cd@ActivateShortCode%
+	\fi%
+	\cd@ActivateVerbBreak%
+	\cd@ActivateVerbCommand%
+	\frenchspacing%
+	\catcode`\^^M=13\relax%
+	\cd@MakeSpace}%
+/\AddBlankLine
+
+\DefineMacro\BoxTolerance
+\DefineMacro\TabSize
+\DefineMacro\Gobble
+These are pretty straigthforward too. I defined a macro instead
+of a simple dimension or number, because it seems to
+me that something like "\TabSize{25}" is much more 
+common in the \LaTeX\ world than "\TabSize25". Besides,
+a "\relax" is automatically added, which avoids errors.
+/
+\newdimen\cd@BoxTolerance
+\def\BoxTolerance#1{\cd@BoxTolerance=#1\relax}
+\def\TabSize#1{\chardef\cd@TabSize=#1\relax}
+\TabSize2
+\def\Gobble#1{\chardef\cd@GobbleNum=#1\relax}
+\Gobble0
+/\AddBlankLine
+
+\subsection{The default \texttt{code} environment}
+
+\DefineMacro\CodeFont
+The basic "code" environment is quite simple. First,
+we define "\CodeFont", which simply stores its argument
+in "\cd@CodeFont", to be released later. The following
+macros are explained more properly in the definition
+of "\NewExample" below.
+/
+\def\CodeFont#1{\def\cd@CodeFont{#1}}
+\CodeFont{\ttfamily}
+\newcount\code@cd@LineNumber
+\def\code@cd@boxwidth{0pt}
+\def\code@cd@BoxStyle{\rmfamily\footnotesize}
+\gdef\code@cd@LineNumberBox{%
+	\global\advance\code@cd@LineNumber1\relax%
+	\def\@currentlabel{\code@cd@LineNumber}%
+	\hbox to\code@cd@boxwidth{%
+	\hss%
+	\code@cd@BoxStyle\relax%
+	\the\code@cd@LineNumber\enspace}}%
+\let\code@cd@EOL\iffalse%
+/
+
+\DefineMacro\code
+We create a paragraph and stores the name of the environment
+(used in "\VerbBreak" to check the width of the line number
+box).
+/
+\def\code{%
+	\endgraf%
+  \bgroup%
+  	\def\cd@ExampleName{code}%
+/
+
+\noindent We launch the verbatim definitions and the complicated
+"\cd@ObeyLines" (see below) that makes ends of lines work properly
+(gobbling characters if needed).
+/
+    \cd@Verbatim%
+    \cd@ObeyLines%
+/
+
+\noindent Every new paragraph, i.e. every line in that
+context, typeset the line number and switches some values
+exlplained above. We also set the font.
+/
+    \everypar{%
+    	\code@cd@LineNumberBox
+      \cd@NewLinetrue%
+      \cd@FirstSpaces0\relax}%
+    \cd@CodeFont%
+/
+
+\noindent Finally, we call the proper macro, depending
+on whether "\code" was called by "\begin{code}", "\begin{code*}"
+or the "\ShortCode" character.
+/
+    \ifcd@ShortCode%
+    	\global\cd@ShortCodefalse%
+    	\let\cd@next\cd@ShortCode%
+    \else\ifcd@Star%
+    	\global\cd@Starfalse%
+    	\let\cd@next\cd@StarCode%
+    \else%
+    	\let\cd@next\cd@Code%
+    \fi\fi\cd@next}
+/
+
+\DefineMacro\invisible
+\noindent The starred variant of "\code" switches to true
+the conditional used just above. Let's also define the
+"invisible" environment, which takes an argument delimited
+by "\end{invisible}" and thus needs to turn some catcodes.
+/
+\expandafter\def\csname code*\endcsname{\cd@Startrue\code}
+\def\invisible{%
+	\bgroup%
+	\catcode`\\=12 \catcode`\{=12 \catcode`\}=12 \catcode`\^^M=13 %
+	\cd@Invisible}
+/
+
+The "^^?" character is used to delimit the end of the verbatim
+material (this is important because all ends of line scan ahead,
+see below). Since it is compared in an "\ifx" conditional, I
+define it to do nothing but with a distinct definition.
+/
+\gdef^^?{\cd@UnlikelyCommand}
+\gdef\cd@UnlikelyCommand{}
+/\AddBlankLine
+
+\DefineMacro\cd@Code
+\DefineMacro\cd@StarCode
+\DefineMacro\cd@Invisible
+"\begin{code}" expects "\end{code}" while "\begin{code*}"
+expects "\end{code*}". That's the reason why we distinguish
+"\cd@Code" and "\cd@StarCode". Apart from that, they do the
+same: they typeset their argument (the first one is the end
+of the line) and close the environment. "\cd@StartGobble" is,
+obviously, the character gobbler for the first line.
+"\cd@Invisible" also matches its end but prints nothing. 
+/
+\begingroup
+\catcode`|=0
+\catcode`<=1
+\catcode`>=2
+\catcode`{=12
+\catcode`}=12
+\catcode`\^^M=13 %
+\catcode`\\=12 %
+|gdef|cd@Code#1^^M#2\end{code}<|cd@StartGobble#2^^?|egroup|end<code>>%
+|gdef|cd@StarCode#1^^M#2\end{code*}<|cd@StartGobble#2^^?|egroup|end<code*>>%
+|gdef|cd@Invisible#1^^M#2\end{invisible}<|egroup|end<invisible>|ignorespaces>%
+|endgroup
+/
+
+Here comes a fastidious part. Because we want to gobble
+characters at the beginning of each line (according to
+"\Gobble"), ends of lines do not simply create a new
+paragraph, they also give a look at the next line and
+gobble the adequate number of characters. Unfortunately,
+their definition changes slightly according to the
+context (default "code" and examples with or without
+\eTeX). Let's set the stage.
+/
+\newcount\cd@GobbleCount%
+\begingroup
+\catcode`\^^M13\relax%
+/
+
+\DefineMacro\cd@StartGobble
+This is the gobbler called at the beginning of the
+material enclosed in a default "code" environment.
+If we meet "^^?", i.e. if the environment is empty,
+we do nothing.
+/
+\gdef\cd@StartGobble#1{%
+	\ifx#1^^?%
+		\cd@GobbleCount=0 %
+		\let\cd@next\relax%
+/
+
+\noindent Else, if we have reached the
+value set by "\Gobble" (stored in "\cd@GobbleNum"),
+we replace the token we were considering in the stream.
+/
+	\else\ifnum\cd@GobbleCount=\cd@GobbleNum%
+		\cd@GobbleCount=0 %
+		\def\cd@next{#1}%
+/
+
+\noindent If we meet an end of line character, that is, 
+if the environment begins with a blank line,
+we put it back too (it will create a paragraph,
+among other things).
+/
+	\else\ifx#1^^M%
+		\cd@GobbleCount=0 %
+		\def\cd@next{^^M}%
+/
+
+Finally, if none of the above apply, we keep
+gobbling.
+/
+	\else%
+		\advance\cd@GobbleCount1 %
+		\let\cd@next\cd@StartGobble%
+	\fi\fi\fi\cd@next}%
+/
+
+\DefineMacro\cd@ObeyLines
+In the "code" environment, ends of lines
+act exactly like "\cd@StartGobble" except
+that they create a paragraph in the first
+three cases.
+/
+\gdef\cd@ObeyLines{%
+	\def^^M##1{%
+		\ifx##1^^?%
+		\cd@GobbleCount=0 %
+		\def\cd@next{\leavevmode\endgraf}%
+	\else\ifnum\cd@GobbleCount=\cd@GobbleNum%
+		\cd@GobbleCount=0 %
+		\def\cd@next{\leavevmode\endgraf##1}%
+	\else\ifx##1^^M%
+		\cd@GobbleCount=0 %
+		\def\cd@next{\leavevmode\endgraf^^M}%
+	\else%
+		\advance\cd@GobbleCount1 %
+		\let\cd@next^^M%
+	\fi\fi\fi\cd@next}}%
+\endgroup
+/\AddBlankLine
+
+
+\subsection{Example environments}
+Examples are quite different from the default "code"
+environment, since they provide both the input and
+the output of a code. Besides, if available, they
+make use of \eTeX.
+
+\DefineMacro\eTeXOn
+\DefineMacro\eTeXOff
+Here's the command to switch from \eTeX\ to external file.
+
+/
+\def\eTeXOn{%
+	\@ifundefined{eTeXversion}%
+		{\cd@Error{%
+		You're not running on eTeX.\MessageBreak%
+		Command \string\eTeXOn\space ignored}}%
+		{\cd@eTeXtrue}}
+\def\eTeXOff{\cd@eTeXfalse}
+/
+
+\DefineMacro\NewExample
+\DefineMacro\cd@NewExample
+\DefineMacro\RenewExample
+\DefineMacro\cd@RenewExample
+\DefineMacro\cd@GobbleThree
+"\NewExample" and "\RenewExample" work similarly
+but in an inverted way. Both test for options and launch
+"\cd@@NewExample" on the options and example name if nothing
+is wrong. Beforehand, they turn "#" into an active character,
+which will be "\let" later to the code material with additional
+macros.
+/
+\def\NewExample{%
+	\@ifnextchar[%
+		{\cd@NewExample}%
+		{\cd@NewExample[]}}
+\def\cd@NewExample[#1]#2{%
+	\expandafter\ifx\csname #2\endcsname\relax
+		\def\cd@next{\catcode`\#=13 \cd@@NewExample{#1}{#2}}%
+	\else%
+		\let\cd@next\relax%
+		\cd@Error{%
+		Style `#2' already defined or the name\MessageBreak%
+		is already in use.\MessageBreak%
+		Use \protect\RenewExample\space if you want to redefine it}%
+		\let\cd@next\cd@GobbleThree%
+	\fi\cd@next}
+
+\def\RenewExample{%
+	\@ifnextchar[%
+		{\cd@RenewExample}%
+		{\cd@RenewExample[]}}
+\def\cd@RenewExample[#1]#2{%
+	\expandafter\ifx\csname #2\endcsname\relax
+		\let\cd@next\relax%
+		\cd@Error{%
+		Style `#2' is undefined.\MessageBreak%
+		Use \protect\NewExample\space to redefine it}%
+		\let\cd@next\cd@GobbleThree%
+	\else\expandafter\ifx\csname #2\endcsname\code%
+		\def\CodeFont{%
+			\cd@Error{%
+			You have redefined the `code' environment.\MessageBreak%
+			\string\CodeFont\space is no longer operative}}
+	\fi%
+		\def\cd@next{\catcode`\#=13 \cd@@NewExample{#1}{#2}}%
+	\fi\cd@next}
+
+\def\cd@GobbleThree#1#2#3{}
+/\AddBlankLine
+
+\IgnorePrefix{cd@@}\DefineMacro\cd@@NewExample\IgnorePrefix{cd@}
+Here is the working mechanism behind both "\NewExample" and "\RenewExample".
+Since "#" will have a special function, we do some catcode changing.
+The definition is "\long", of course.
+/
+\begingroup
+\catcode`\"=6 %
+\catcode`\#=13 %
+\long\gdef\cd@@NewExample"1"2"3"4"5{%
+/
+
+\noindent We define some default values: "\"\meta{Example}"@cd@EOL"
+is a switch used when the example is processed with \eTeX, indicating
+whether ends of lines are visible or not. By default, they aren't, but
+options may change it. "\"\meta{Example}"@cd@LineNumberBox" is the
+command used in examples to typeset the line number. By default, it
+is set to "\relax" because examples have no line number.
+
+\DefineMacro\cd@ExampleName
+We store the name of the example to be retrieved when the
+environment is processed, but actually it is stored here for
+the options. Finally, we analyze options with a terminator.
+/
+	\expandafter\gdef\csname"2@cd@EOL\endcsname{\iffalse}%
+	\expandafter\let\csname"2@cd@LineNumberBox\endcsname\relax%
+	\def\cd@ExampleName{"2}%
+	\cd@ExampleOptions"1,cd@end,%
+/
+
+\DefineMacro\CodeInput
+\DefineMacro\CodeOutput
+\DefineMacro\cd@MakeExample
+Now we define "\"\meta{Example}, which will be called
+by "\begin"\marg{Example}, as usual in \LaTeX. Each time, it
+redefines "\CodeInput" and "\CodeOutput". Both store the name
+of the example, "\let" "#" to "\cd@Input" and "\cd@Output" respectively,
+whose definitions depends on the way the example is processed
+(\eTeX\ or not), and finally execute the definition given
+by the user. "\cd@MakeExample" simply executes the last
+argument; it will be called at the end of the environment. Note
+the extra pairs of braces in all cases.
+/
+	\expandafter\def\csname"2\endcsname{%
+		\gdef\CodeInput{{%
+			\def\cd@ExampleName{"2}%
+			\let#\cd@Input%
+			"3}}%
+		\gdef\CodeOutput{%
+			\def\cd@ExampleName{"2}%
+			\let#\cd@Output{"4}}%
+		\gdef\cd@MakeExample{{"5}}%
+/
+
+\noindent Finally, we launch the example maker with the
+name of the environment (to match its proper end).
+/
+		\cd@Example{"2}}%
+/
+
+\noindent We also define the starred version of "\"\meta{Example},
+whose only difference is to switch the star conditional. Finally,
+we restore the category code of "#" and close.
+/
+	\expandafter\def\csname"2*\endcsname{%
+		\global\cd@Startrue%
+		\gdef\CodeInput{{%
+		\def\cd@ExampleName{"2}%
+		\cd@Startrue%
+		\let#\cd@Input%
+		"3}}%
+		\gdef\CodeOutput{%
+			\def\cd@ExampleName{"2}%
+			\let#\cd@Output{"4}}%
+		\gdef\cd@MakeExample{{"5}}%
+		\cd@Example{"2*}}%
+	\catcode`\#=6\relax}%
+\endgroup
+/\AddBlankLine
+
+\DefineMacro\cd@numbered
+\DefineMacro\cd@continuous
+\DefineMacro\cd@visibleEOL
+\DefineMacro\cd@empty
+Now we process options. First we define some keywords.
+/
+\def\cd@numbered{numbered}
+\def\cd@continuous{continuous}
+\def\cd@visibleEOL{visibleEOL}
+\def\cd@empty{}
+/
+
+\DefineMacro\cd@ExampleOptions
+This is the option processor. It is recursive and stops
+when it meets the terminator. It simply stores the name
+of the option and acts accordingly.
+/
+\def\cd@ExampleOptions#1,{%
+	\def\cd@TempOption{#1}%
+	\let\cd@next\cd@ExampleOptions%
+	\ifx\cd@TempOption\cd@end%
+		\let\cd@next\relax%
+/
+
+\noindent If the option is "numbered", we create a new
+count register, set the width of the box containing the
+number to 0pt by default, and define the style of this
+number to be "\relax" by default too. They will be modified
+by "\LineNumber".
+/
+	\else\ifx\cd@TempOption\cd@numbered%
+		\global\expandafter\newcount\csname\cd@ExampleName @cd@LineNumber\endcsname%
+		\expandafter\gdef\csname\cd@ExampleName @cd@boxwidth\endcsname{0pt}%
+		\expandafter\let\csname\cd@ExampleName @cd@BoxStyle\endcsname\relax%
+/
+
+\noindent We then define the macro executed by the environment for
+the line number; it increments the count, stores its value as the
+current label for "\label" and "\ref", create a box of the 
+desired width, flushes everything to the right, executes the style
+and typeset the value of the counter.
+/
+		\expandafter\gdef\csname\cd@ExampleName @cd@LineNumberBox\endcsname{%
+			\expandafter\advance\csname\cd@ExampleName @cd@LineNumber\endcsname1\relax%
+			\def\@currentlabel{\expandafter\the\csname\cd@ExampleName @cd@LineNumber\endcsname}%
+			\hbox to\csname\cd@ExampleName @cd@boxwidth\endcsname{%
+				\hss%
+				\csname\cd@ExampleName @cd@BoxStyle\endcsname\relax%
+				\expandafter\the\csname\cd@ExampleName @cd@LineNumber\endcsname\enspace}}%
+/
+
+\noindent If the option is "continuous", we do the same thing,
+except that the count register is created if and only if it
+does not already exists (so that a modified "continuous" example
+environment will continue where it stopped; the user may
+use "\LineNumber" to start back from 0), and the "\advance"
+of the count is "\global", so that the last value is always
+retained from one environment to the other.
+/
+	\else\ifx\cd@TempOption\cd@continuous%
+		\expandafter\ifx\csname\cd@ExampleName @cd@LineNumber\endcsname\relax%
+			\global\expandafter\newcount\csname\cd@ExampleName @cd@LineNumber\endcsname%
+		\fi%
+		\expandafter\gdef\csname\cd@ExampleName @cd@boxwidth\endcsname{0pt}%
+		\expandafter\let\csname\cd@ExampleName @cd@BoxStyle\endcsname\relax%
+		\expandafter\gdef\csname\cd@ExampleName @cd@LineNumberBox\endcsname{%
+			\global\expandafter\advance\csname\cd@ExampleName @cd@LineNumber\endcsname1\relax%
+			\def\@currentlabel{\expandafter\the\csname\cd@ExampleName @cd@LineNumber\endcsname}%
+			\hbox to\csname\cd@ExampleName @cd@boxwidth\endcsname{%
+				\hss%
+				\csname\cd@ExampleName @cd@BoxStyle\endcsname\relax%
+				\expandafter\the\csname\cd@ExampleName @cd@LineNumber\endcsname\enspace}}%
+/
+
+\noindent The "visibleEOL" option simply sets the relevant conditional to "true".
+/
+	\else\ifx\cd@TempOption\cd@visibleEOL%
+		\expandafter\gdef\csname\cd@ExampleName @cd@EOL\endcsname{\csname iftrue\endcsname}%
+	\else\ifx\cd@TempOption\cd@empty%
+	\else%
+		\cd@Error{`#1' is not a valid option}%
+	\fi\fi\fi\fi\fi\cd@next}%
+/\AddBlankLine
+
+\DefineMacro\LineNumber
+\DefineMacro\cd@SetLineNumber
+"\LineNumber" is straightforward. After some testing, it sets
+the macro created above to the values specified. If a 
+a square bracket follows, it executes "\cd@SetLineNumber".
+/
+\def\LineNumber#1#2#3{%
+	\expandafter\ifx\csname#1@cd@EOL\endcsname\relax%
+		\cd@Error{`#1' is not an example environment'}%
+	\else\expandafter\ifx\csname #1@cd@LineNumber\endcsname\relax%
+		\cd@Warning{%
+			`#1' is not `numbered' nor `continuous'.\MessageBreak%
+			\string\LineNumber\space on line \the\inputlineno\space is useless}{}%
+	\else%
+		\expandafter\gdef\csname #1@cd@BoxStyle\endcsname{#2}%
+		\expandafter\gdef\csname #1@cd@boxwidth\endcsname{#3}%
+	\fi\fi%
+	\@ifnextchar[{\cd@SetLineNumber#1}\relax}
+\def\cd@SetLineNumber#1[#2]{%
+	\expandafter\ifx\csname#1@cd@LineNumber\endcsname\relax%
+	\else%
+		\csname#1@cd@LineNumber\endcsname=#2\relax%
+		\expandafter\advance\csname#1@cd@LineNumber\endcsname\m@ne%
+	\fi}
+/\AddBlankLine
+
+\DefineEnvironment{example}
+The default "example" environment is thus easily created.
+/
+\NewExample{example}{\ttfamily#}{#}{}
+/
+
+\DefineMacro\CodeInput
+\DefineMacro\CodeOutput
+If no example has been created, these two macros yields
+error messages.
+/
+\def\CodeInput{%
+	\cd@Error{%
+		No example environment has been created.\MessageBreak%
+		\string\CodeInput\space is void}}
+\def\CodeOutput{%
+	\cd@Error{%
+		No example environment has been created.\MessageBreak%
+		\string\CodeOutput\space is void}}
+/\AddBlankLine
+
+\noindent And here comes the core example environment. First,
+some catcode changing.
+/
+\begingroup
+\catcode`|=0 %
+\catcode`<=1 %
+\catcode`>=2 %
+\catcode`{=12 %
+\catcode`}=12 %
+\catcode`\\=12 %
+/
+
+\DefineMacro\cd@Example
+This prepares the conditions for the processing
+of the material. Let's start with the usual stuff:
+/
+|gdef|cd@Example#1<%
+	|bgroup%
+		|let|do|@makeother%
+		|dospecials%
+/
+
+\noindent Now, if the environment was called by a "\ShortCode"
+character, there is no environment to close ("\cd@EndEnv"
+executes "\end"\marg{Environment}). We call "\cd@MakeExampleEnd",
+defined below, on the character, and we reactivate this character
+just in case it was one of the special.
+/
+		|ifcd@ShortCode%
+			|global|let|cd@EndEnv|relax
+			|expandafter|cd@MakeExampleEnd|expandafter<|cd@ShortEnd>%
+			|global|cd@ShortCodefalse%
+			|cd@ActivateShortCode%
+/
+
+\noindent If the environment was called by a regular
+"\begin"\meta{Environment} statement, we define the proper
+end (the argument comes from "\"\meta{Example}, see the definition
+in "\cd@@NewExample" above). If there exists a "\ShortCode"
+character, we undefine it.
+/
+		|else%
+			|gdef|cd@EndEnv<|end<#1>>%
+			|cd@MakeExampleEnd<\end{#1}>%
+			|ifcd@ShortCodeChar%
+				|UndoShortCode%
+			|fi%
+		|fi%
+/
+
+\noindent If there's a short verb, we turn it off,
+we set tabs to 12 so they are written to the file
+as any other character, we activate ends of lines
+and in case \eTeX\ is to process the example, we
+also activate comment characters (\eTeX's scanning
+mechanism is peculiar and commented parts of the
+code wouldn't be taken into account otherwise).
+/
+		|ifcd@ShortVerb%
+			|UndoShortVerb%
+		|fi%
+		|catcode`|^^I=12 %
+		|catcode`|^^M=13 %
+		|ifcd@eTeX%
+			|catcode`|%=13 %
+		|fi%
+		|cd@ExampleEnd>%
+|endgroup
+/
+
+\DefineMacro\cd@MakeExampleEnd
+\DefineMacro\cd@ExampleEnd
+"\cd@MakeExampleEnd" defines "\cd@ExampleEnd" so that
+the environment meets its proper end. It also launches
+the real processing, depending on the use of \eTeX\ or not.
+
+The argument has been passed in "\cd@Example" above, and
+is either "\end"\marg{Environment} (with the proper catcodes)
+or the "\ShortCode" character.
+
+In case we're using \eTeX, we close some groups and environments,
+empty "\everypar" and assign the input. We switch the star
+conditional after that, because it is needed when the input
+is assigned and "\cd@Verbatim" is called.
+
+/
+\begingroup
+\catcode`\^^M=13 %
+%
+\gdef\cd@MakeExampleEnd#1{%
+	\ifcd@eTeX%
+		\gdef\cd@ExampleEnd##1^^M##2#1{%
+			\egroup%
+			\cd@EndEnv%
+			\bgroup%
+				\everypar{}%
+				\cd@AssigneTeXInput{##2}%
+			\global\cd@Starfalse}%
+/
+
+\noindent If we're not using \eTeX, we do some testing beforehand.
+We just want to inform the user that we're opening an external file.
+If it already exists, we keep silent.
+/
+	\else%
+		\def\cd@ExampleEnd##1^^M##2#1{%
+			\expandafter\ifx\csname cd@TestRead\endcsname\relax%
+				\newread\cd@TestRead%
+			\fi%
+			\openin\cd@TestRead=\jobname.exp %
+			\ifeof\cd@TestRead\relax%
+				\cd@Warning{%
+				You're not running on eTeX or you've said \string\eTeXOff.\MessageBreak%
+				I create the file \jobname.exp to produce\MessageBreak%
+				the example environment on line \the\inputlineno.\MessageBreak%
+				You can delete it whenever you want, but\MessageBreak%
+				keeping it prevents this message from reappearing.}%
+			\fi%
+			\closein\cd@TestRead %
+/
+
+\DefineMacro\cd@expFile
+If it does not already exists, we create
+the output stream "\cd@expFile", which opens
+an external scratch file for example processing.
+/
+			\expandafter\ifx\csname cd@expFile\endcsname\relax%
+				\newwrite\cd@expFile%
+			\fi%
+				\immediate\openout\cd@expFile=\jobname.exp %
+/
+
+\noindent We "\let" ends of lines to a macro
+equivalent to the one described above for the default "code"
+environment, except that each line is written to the
+external file. We launch it on the material suffixed
+with a complicated tail to match all cases. 
+/
+			\let^^M\cd@noeTeXEOL%
+			^^M##2^^?^^M^^?%§label¤eol£
+/
+
+\noindent Finally, we close everything and assign input
+once again.
+/
+			\egroup%
+			\cd@EndEnv%
+			\immediate\closeout\cd@expFile%
+			\bgroup%
+				\everypar{}%
+				\cd@AssignInput%
+			\egroup\global\cd@Starfalse}%
+	\fi}%
+\endgroup
+/
+
+
+\subsubsection{Examples without \eTeX}
+
+\DefineMacro\cd@noeTeXEOL
+Here's how ends of lines are processed when writing
+the code material to an external file. If we find
+"^^?", which marks the end of the material, we stop.
+/
+\begingroup
+\catcode`\^^M\active%
+\gdef\cd@noeTeXEOL#1{%
+	\ifx#1^^?%
+		\cd@GobbleCount=0 %
+		\let^^M\relax%
+		\let\cd@next\relax%
+/
+
+\noindent If we find an end of line, that means there's
+a blank line, and we write it to the "jobname.exp".
+/
+	\else\ifx#1^^M%
+		\cd@GobbleCount=0 %
+		\def\cd@next{\immediate\write\cd@expFile{}\cd@noeTeXEOL}%
+/
+
+\noindent If we have gobbled enough characters, we
+write the line to the external file. Otherwise, we repeat.
+/
+	\else\ifnum\cd@GobbleCount=\cd@GobbleNum%
+		\cd@GobbleCount=0 %
+		\def\cd@next{\cd@LineWrite#1}%
+	\else%
+		\advance\cd@GobbleCount1 %
+		\let\cd@next\cd@noeTeXEOL%
+	\fi\fi\fi\cd@next}%
+/
+
+\DefineMacro\cd@LineWrite
+The line written is delimited by its end. This explains
+the "^^?^^M^^?" suffix at the end of the material on line~\ref{eol}.
+In case "\end"\marg{Example} occurs on its own line, we need
+a terminator, hence the first "^^?". If it occurs at the end
+of the last line, as in "... end of code\end{code}", we need
+"^^M" so that the argument of "\cd@LineWrite" is properly
+delimited. The first "^^?" is then written to the file, but it
+expands to nothing. Since "\cd@LineWrite" calls "\cd@noeTeXEOL",
+we need another delimitator, hence the second "^^?".
+/
+\gdef\cd@LineWrite#1^^M{\immediate\write\cd@expFile{#1}\cd@noeTeXEOL}%
+/
+
+\DefineMacro\cd@AssignInput
+Now we define the macro that will be used in "\CodeInput" (where
+"#" is "\let" to "\cd@Input") and "\CodeOutput" (where it is "\let"
+to "\cd@Output").
+
+\DefineMacro\cd@Input
+The input is quite similar to the default "code" environment.
+We define ends of lines as usual in verbatim contexts and we
+read from the scratch file.
+/
+\newtoks\cd@Everypar
+%
+\gdef\cd@AssignInput{%
+	\gdef\cd@Input{%
+		\bgroup%
+			\cd@Everypar\everypar%
+			\everypar{%
+				\leavevmode\csname\cd@ExampleName @cd@LineNumberBox\endcsname\relax%
+				\cd@NewLinetrue\cd@FirstSpaces0\relax\the\cd@Everypar\relax}%
+			\cd@Verbatim%
+			\def^^M{\leavevmode\endgraf}%
+			\input{\jobname.exp}%
+		\egroup}%
+/
+
+\DefineMacro\cd@Output
+The output also reads from the file and simply ignores
+verb breaks and commands.
+/
+	\gdef\cd@Output{%
+		\bgroup%
+			\cd@IgnoreVerbBreak%
+			\cd@IgnoreVerbCommand%
+			\input{\jobname.exp}%
+		\egroup}%
+/
+
+\noindent Finally, we execute the last argument to "\NewExample",
+i.e. what was dubbed here \meta{Immediate execution}.
+/
+		\cd@MakeExample}%
+/
+
+\begin{invisible}
+%
+\end{invisible}
+
+\subsubsection{Examples with \eTeX}
+\DefineMacro\cd@AssigneTeXInput
+Examples with \eTeX\ are much more complicated. We use
+the "\scantokens" command, whose function is to read
+its argument as if catcodes were not fixed. For instance,\\
+"\def\scan#1{{\catcode`\\=12\scantokens{#1}}}"\\
+"\scan\foo"\\
+yields "\foo", although the backslash was an escape character
+when read. The problem is that "\scantokens" interprets ends
+of lines and comments characters with their current values.
+Ends of lines yields a "\par" token as usual; the problem
+is that this token is scanned anew, and if you have turned
+the backslash to a category 12 character, it will appear as
+such. Moreover, commented parts of a line are ignored. For instance,\\
+"\scan{"\\
+"a% mycomment"\\
+""\\
+"b}"\\
+yields "a\par b". So "\scantokens" as it stands is not appropriate
+for verbatim material.\cox(240,3pt,20pt,Progress...)
+
+The solution is to turned ends of lines and comments to other
+catcodes beforehand. Thus the previous example yields "a% mycomment^^M^^Mb^^M".
+(The final end of line is added by "\scantokens".) Now we need
+some hacking to produce the desired result.
+
+\DefineMacro\cd@Input
+The input begins with the usual verbatim preparation.
+/
+\long\gdef\cd@AssigneTeXInput#1{%
+	\gdef\cd@Input{%
+		\bgroup%
+			\cd@Everypar\everypar%
+			\everypar{%
+			\leavevmode\csname\cd@ExampleName @cd@LineNumberBox\endcsname\relax%
+			\cd@NewLinetrue\cd@FirstSpaces0\relax\the\cd@Everypar\relax}%
+			\cd@Verbatim%
+/
+
+\noindent We define ends of lines as yet another gobbling
+mechanism. We use "^^?" once again to delimit material,
+and define it to make ends of lines ignored in case it
+is read, so that the additional "^^M" at the end of
+"\scantokens" will be ineffective.
+/
+			\catcode`\^^M=13 %
+			\let^^M\cd@eTeXStartGobble%
+			\catcode`\^^?13 %
+			\def^^?{\catcode`\^^M=9\relax}%
+			\scantokens{^^M#1^^?}%
+		\egroup}%
+/
+
+\DefineMacro\cd@Output
+Output is still worse. Even comments are active.
+/
+	\gdef\cd@Output{%
+		\bgroup%
+			\cd@IgnoreVerbBreak%
+			\catcode`\^^?13 % 
+			\catcode`\%=13 %
+			\catcode`\^^M=13 %
+/
+
+\noindent The next step depends on the user's choice about
+ends of lines. If they are visible, we process the material
+as is, with special definitions of "%" and "^^M" to mimick
+\TeX's normal behavior.
+/
+			\csname\cd@ExampleName @cd@EOL\endcsname%
+				\cd@VisibleComment%
+				\let^^M\cd@eTeXOutVisibleEOL%
+				\def^^?{\let^^M\relax}%
+				\cd@IgnoreVerbCommand%
+				\scantokens{#1^^?}%
+/
+
+\noindent If ends of lines are not visible, we execute the
+material beforehand with only "%", "^^M" and "^^?" effective,
+to remove unwanted code. Macros are not executed because
+the backslash is still of category 12. Once ends of lines
+are thus processed, we scan everything anew, ignoring the
+last "^^M" and "^^@", which has a special function (see below).
+/
+			\else%
+				\cd@ActiveComment%
+				\let^^M\cd@eTeXOutEOL%
+				\def^^?{\catcode`\^^M9\relax}%
+				\xdef\cd@exinput{#1^^?}%
+				\cd@IgnoreVerbCommand%
+				\catcode`\^^M=9 %
+				\catcode`\^^@=9 %
+				\expandafter\scantokens\expandafter{\cd@exinput}%
+			\fi%
+		\egroup}%
+	\cd@MakeExample\egroup}%
+/
+\begin{invisible}
+%
+\end{invisible}
+
+\DefineMacro\cd@eTeXStartGobble
+\DefineMacro\cd@eTeXEOL
+Once again, macros to gobble the right number of
+characters at the beginning of each line. These are
+for the input. It is not
+possible to put "\cd@eTeXStartGobble" directly at
+the beginning of "\scantokens", because the backslash
+would not be understood as an escape character. Thus we
+have to "\let" "^^M" to it, and once it has done its
+job, make it change the meaning of "^^M" to "\cd@eTeXEOL".
+(That's also the reason why we couldn't reuse the
+gobble macro of the default "code" environment, although
+they are quite similar.)
+/
+\gdef\cd@eTeXStartGobble#1{%
+	\ifx#1^^?%
+		\cd@GobbleCount=0 %
+		\let\cd@next\relax%
+	\else\ifnum\cd@GobbleCount=\cd@GobbleNum%
+		\cd@GobbleCount=0 %
+		\let^^M\cd@eTeXEOL%
+		\def\cd@next{#1}%
+	\else\ifx#1^^M%
+		\cd@GobbleCount=0 %
+		\let^^M\cd@eTeXEOL%
+		\let\cd@next^^M%
+	\else%
+		\advance\cd@GobbleCount1 %
+		\let\cd@next\cd@eTeXStartGobble%
+	\fi\fi\fi\cd@next}%
+%
+\gdef\cd@eTeXEOL#1{%
+	\ifx#1^^?%
+		\cd@GobbleCount=0 %
+		\def\cd@next{\let^^M\relax\leavevmode\endgraf}%
+	\else\ifx#1^^M%
+		\cd@GobbleCount=0 %
+		\def\cd@next{\leavevmode\endgraf^^M}%
+	\else\ifnum\cd@GobbleCount=\cd@GobbleNum%
+		\cd@GobbleCount=0 %
+		\def\cd@next{\leavevmode\endgraf#1}%
+	\else%
+		\advance\cd@GobbleCount1 %
+		\let\cd@next^^M%
+	\fi\fi\fi\cd@next}%
+/
+\begin{invisible}
+%
+\end{invisible}
+
+
+\DefineMacro\cd@eTeXOutVisibleEOL
+And now, the output. If ends of lines are visible, we set
+them to create a "\par" if the next
+character is another end of line (i.e. if
+we find a blank line) or to put it back into
+the stream otherwise, with a space before.
+/
+\gdef\cd@eTeXOutVisibleEOL#1{%
+	\ifx#1^^?%
+		\let^^M\relax%
+		\let\cd@next\relax%
+	\else\ifx#1^^M%
+		\par%
+		\let\cd@next^^M%
+	\else%
+		\def\cd@next{ #1}%
+	\fi\fi\cd@next}%
+/
+
+\DefineMacro\cd@eTeXOutEOL
+If ends of lines are not visible, i.e. if
+they are processed before anything else, we do
+something similar, except that we add a dummy
+character, which will be ignored when the material
+is scanned, but will nonetheless prevent the
+formation of macro names across lines. Tail recursion
+is forbidden, since this will be used in a "\edef",
+so we "\expandafter" instead.
+/
+\catcode`\^^@=12\relax%
+\gdef\cd@eTeXOutEOL#1{%
+	\ifx#1^^?%
+	\else\ifx#1^^M%
+		\par%
+		\expandafter^^M%
+	\else%
+	^^@ \expandafter\expandafter\expandafter#1%
+	\fi\fi}%
+/
+
+\noindent Now we deal with comments. First we do
+some catcode changing. (We need a comment character
+since we're currently in a group where ends of lines
+are active).
+\begin{code}
+\catcode`\/=14\relax%
+\catcode`\%=13\relax/
+\catcode`\ =12\relax/
+\catcode`\^^I=12\relax/
+\end{code}
+
+\DefineMacro\cd@VisibleComment
+\DefineMacro\cd@EatBOL
+If ends of lines are visible we define comments to
+eat everything until the end of the line and then
+launch a macro whose sole purpose is to remove
+spaces at the beginning of the next line.
+\begin{code}
+\gdef\cd@VisibleComment{/
+\def%##1^^M{\cd@EatBOL}/
+\def\cd@EatBOL##1{/
+\let\cd@next\cd@EatBOL/
+\ifx##1 /
+\else\ifx##1^^I/
+\else\ifx##1^^M/
+\let\cd@next\par/
+\else/
+\def\cd@next{##1}/
+\fi\fi\fi\cd@next}}/
+\end{code}
+
+\DefineMacro\cd@ActiveComment
+\DefineMacro\cd@EatBOL
+If ends of line are not visible, we do the same
+in the "\expandafter" way.
+\begin{code}
+\gdef\cd@ActiveComment{/
+\def%##1^^M{\cd@EatBOL}/
+\def\cd@EatBOL##1{/
+\ifx##1 /
+\expandafter\cd@EatBOL/
+\else\ifx##1^^I/
+\expandafter\expandafter\expandafter\cd@EatBOL/
+\else\ifx##1^^M/
+\par/
+\else/
+\expandafter\expandafter\expandafter\expandafter\expandafter\expandafter\expandafter##1/
+\fi\fi\fi}}/
+\endgroup
+\end{code}
+
+
+\subsection{File management}
+Here are some simple macro for the reader's relief.
+
+\DefineMacro\CloseFile
+Closing a file in normal mode simply makes all file identification macros
+unavailable.
+
+/
+\def\CloseFile#1{%
+	\def\FileSource{%
+		\cd@Error{%
+			No file in production. \string\FileSource\space is empty}}%
+	\def\FileName{%
+		\cd@Error{%
+			No file in production. \string\FileName\space is empty}}%
+	\def\FileVersion{%
+		\cd@Error{%
+			No file in production. \string\FileVersion\space is empty}}%
+	\def\FileDate{%
+		\cd@Error{%
+			No file in production. \string\FileDate\space is empty}}}
+/
+
+\DefineMacro\@cd@LineCount
+That's why, in normal mode, we close a file right now. We nonetheless
+create a dummy file name for the sake of "\ProduceFile" below.
+/
+\ifcd@produce%
+	\def\FileName{}
+	\def\FileVersion{}
+	\def\FileDate{}
+\else
+	\CloseFile{}
+	\def\FileSource{}
+	\newcount\@cd@LineCount%
+\fi
+/
+
+\DefineMacro\ProduceFile
+In normal mode, the main job of "\ProduceFile" is to reset some line number
+counts. In "autoclose" mode, there's only one counter, since files
+are closed when a new one is opened.
+/
+\def\ProduceFile#1{%
+	\ifcd@autoclose%
+		\code@cd@LineNumber0\relax%
+/
+
+\noindent If "autoclose" is off, we allocate a count for each file,
+so lines are numbered according to the file they belong to. We
+store the last value for the file we're going to close (stored
+in "\FileSource"), and set the line number of the code to the number
+for the file we're going to (re)open. That's why we needed a dummy
+"\FileSource" above, when "\ProduceFile" is executed for the first time.
+/
+	\else%
+		\expandafter\csname\FileSource @cd@LineCount\endcsname=\code@cd@LineNumber%
+		\expandafter\ifx\csname #1@cd@LineCount\endcsname\relax%
+			\expandafter\newcount\csname #1@cd@LineCount\endcsname%
+			\code@cd@LineNumber0\relax%
+		\else%
+			\expandafter\code@cd@LineNumber\csname #1@cd@LineCount\endcsname%
+		\fi%
+	\fi%
+/
+
+\DefineMacro\FileSource
+We reset "\FileName" and others, because their definition
+is optional. "\FileSource" is mandatory and is the actual
+argument of "\ProduceFile". We launch the appropriate macro
+if a left bracket follows.
+/
+	\def\FileName{%
+		\cd@Error{%
+			No \string\FileName\space has been given to \FileSource}}%
+	\def\FileVersion{%
+	\cd@Error{%
+		No \string\FileVersion\space has been given to \FileSource}}%
+	\def\FileDate{%
+	\cd@Error{%
+		No \string\FileDate\space has been given to \FileSource}}%
+	\edef\FileSource{#1}%
+	\@ifnextchar[%
+	{\cd@GetFileName}%
+	\relax}
+/
+
+\DefineMacro\cd@GetFileName
+\DefineMacro\FileName
+\DefineMacro\cd@GetFileVersion
+\DefineMacro\FileVersion
+\DefineMacro\cd@GetFileDate
+\DefineMacro\FileDate
+These are straightforward and don't need any comment.
+\cox[6pt](30,0pt,0pt,What if \emph{I} want\\\strut\kern2pt comment?)
+/
+\def\cd@GetFileName[#1]{%
+	\edef\FileName{#1}%
+	\@ifnextchar[\cd@GetFileVersion\relax}
+\def\cd@GetFileVersion[#1]{%
+	\edef\FileVersion{#1}%
+	\@ifnextchar[\cd@GetFileDate\relax}
+\def\cd@GetFileDate[#1]{%
+	\edef\FileDate{#1}}
+/\AddBlankLine
+
+\DefineMacro\Header
+\DefineMacro\cd@HeaderGobble
+\DefineMacro\AddBlankLine
+\DefineMacro\StartIgnore
+\DefineMacro\StopIgnore
+\DefineMacro\DangerousEnvironment
+Finally, we define those macros that have no effect
+in normal mode to have, well, no effect. Since comment
+signs are `other' characters in produce mode, we change
+their catcode here too, so that the user may close the
+argument to "\Header" after a comment sign.
+/
+\def\Header{\bgroup\catcode`\%=12 \cd@HeaderGobble}
+\long\def\cd@HeaderGobble#1{\egroup}
+\let\AddBlankLine\relax
+\let\StartIgnore\relax
+\let\StopIgnore\relax
+\def\DangerousEnvironment#1{}
+/\AddBlankLine
+
+\begin{invisible}
+%
+% Definitions for the produce mode
+%
+\end{invisible}
+
+
+
+\section{Produce mode}
+We now turn to produce mode, where "codedoc" becomes "CodeDoc"
+and strange things happen.\cox[10pt](120,0pt,20pt,\hskip-4pt Woooo, scary...)
+
+\subsection{Messages}
+\DefineMacro\cd@Tracing
+\DefineMacro\cd@TChar
+\DefineMacro\cd@TUChar
+\DefineMacro\cd@TCode
+\CD\ may be quite talkative. According to the "tracing"
+option, we define some messages.
+/
+\ifcase\cd@tracingmode
+	\def\cd@Tracing#1{}
+	\def\cd@TChar#1#2{}
+	\def\cd@TUChar#1{}
+	\let\cd@TCode\relax
+\or
+	\def\cd@Tracing#1{}
+	\def\cd@TChar#1#2{}
+	\def\cd@TUChar#1{}
+	\def\cd@TCode{\immediate\write17{%
+		*** Code written from line \the\cd@ProduceLine\space to ¨\the\inputlineno\space to \cd@CurrentFile. ***}}
+\or
+	\def\cd@Tracing#1{\immediate\write17{On line \the\cd@ProduceLine: #1.}}
+	\def\cd@TChar#1#2{
+		\bgroup
+			\escapechar\m@ne\cd@Tracing{`\string#1' defined as \string\\#2}
+		\egroup}
+	\def\cd@TUChar#1{
+		\bgroup
+			\escapechar\m@ne\cd@Tracing{\string\\#1 undone}
+		\egroup}
+	\def\cd@TCode{\immediate\write17{%
+		*** Code written from line \the\cd@ProduceLine\space to ¨\the\inputlineno\space to \cd@CurrentFile. ***}}
+\fi
+/
+
+\DefineMacro\cd@Error
+\DefineMacro\cd@CDWarning
+\DefineMacro\cd@NoFileWarning
+We also define errors and warnings; there's no need to
+follow \LaTeX's ordinary syntax here.
+/
+\def\cd@CDError#1{%
+	\immediate\write17{%
+		^^J! CodeDoc Error:^^J#1^^Jl.\the\cd@ProduceLine^^J }}
+\def\cd@CDWarning#1{%
+	\immediate\write17{%
+		^^J? CodeDoc Warning: ^^J#1^^Jl.\the\cd@ProduceLine^^J }}
+\def\cd@NoFileWarning{\cd@CDWarning{No file in production. This code will be lost.}}
+/\AddBlankLine
+
+
+
+\subsection{Testing strings}
+In produce mode, \CD\ is a string tester; more precisely
+it imitates \TeX's normal mechanism: the escape character
+is turned into an active character that gathers letters
+following it and executes the name they form (in a modified
+fashion, however, to execute only relevant macros).
+
+\DefineMacro\@documentclasshook
+First, we redefine what happens at the end of the
+class to alter the behavior of special characters.
+However, we maintain comments and turn "\" into an 
+active character.
+/
+\ifcd@produce
+\def\@documentclasshook{
+	\let\do\@makeother
+	\dospecials
+	\catcode`\^^I=12\relax
+	\catcode`\%=14\relax
+	\catcode`\\\active
+/
+
+\noindent By default, "\normalsize" is an error message,
+so we redefine it. We start the report.
+/
+	\let\normalsize\relax
+	\ifnum\cd@tracingmode>0 
+		\immediate\write17{^^J*** CODEDOC REPORT ***^^J}
+	\fi
+/
+
+\noindent We don't load any font, so there's no need
+to bother with overfull boxes nor outputs. However,
+by pure superstition, I prefer some care.\cox[6pt](120,0pt,0pt,\hskip-5pt Does he know\\what he's doing?)
+/
+	\hfuzz=100cm%
+	\output={\deadcycles0\setbox0\box255}
+	\everypar{}
+/
+
+\noindent Most of the following are already 0. However,
+"\tracingcommands2" would explode the log file, so we
+take some care once again.
+/
+	\tracingcommands\z@\tracingmacros\z@\tracingoutput\z@\tracingparagraphs\z@
+	\tracingpages\z@\tracinglostchars\z@\tracingrestores\z@\tracingstats\z@}
+\fi
+/\AddBlankLine
+
+\DefineMacro\cd@LeftBrace
+\DefineMacro\cd@RightBrace
+\DefineMacro\cd@LeftBracket
+\DefineMacro\cd@Space
+\DefineMacro\cd@Tab
+\DefineMacro\cd@EndOfLine
+\DefineMacro\cd@Comment
+Some characters are special, to say the least.
+We need to be able to recognize them.
+\begin{code}
+\begingroup
+\catcode`\{=12 %
+\catcode`\}=12 %
+\catcode`\<=1 %
+\catcode`\>=2 %
+\gdef\cd@LeftBrace<{>
+\gdef\cd@RightBrace<}>
+\gdef\cd@LeftBracket<[>
+\catcode`\ =12\relax
+\catcode`\^^I=12\relax
+\gdef\cd@Space< >
+\gdef\cd@Tab<^^I>
+\catcode`\^^M=12\relax%
+\gdef\cd@EndOfLine<^^M>%
+\catcode`\/=14\relax/
+\catcode`\%=12\relax/
+\gdef\cd@Comment<%>/
+\endgroup
+\end{code}\AddBlankLine
+
+\DefineMacro\cd@Escape
+Here comes the definition of the escape character
+as itself... The backslash can't be allowed to have
+catcode 0, otherwise control sequences would form and
+fire. We don't want that, obviously. On the other hand,
+some control sequences should be executed, so they must
+be form beforehand. Here's how "\" works. First, it
+stores the current line number for messages.
+/
+\newcount\cd@ProduceLine
+
+\begingroup
+\catcode`|=0 %
+\catcode`\\=13 %
+|gdef|cd@Escape{\}%
+|gdef\#1{%
+	|cd@ProduceLine|inputlineno%
+/
+
+\noindent Then it turns ends of lines
+and comments to other characters, because
+we don't want to pass them unnoticed.
+If the next character is of category code
+11, we start forming a control sequence.
+Otherwise, we gobble it and stop.
+
+/
+	|bgroup
+		|catcode`|^^M=12 %
+		|catcode`|%=12 %
+		|gdef|cd@MacroName{}%
+		|ifnum|catcode`#1=11 %
+			|def|cd@next{|cd@Gather#1}%
+		|else
+			|def|cd@next{|egroup|relax}
+		|fi
+		|cd@next}
+/
+
+\DefineMacro\cd@Gather
+\DefineMacro\cd@MacroName
+\DefineMacro\cd@NextChar
+Forming macro names is quite simple:
+if the next character is a letter, we
+add it to the temporary name. Otherwise,
+we store it in "\cd@NextChar" and start
+doing what \TeX\ does when it has formed
+a control sequence.
+/
+|long|gdef|cd@Gather#1{%
+	|ifnum|catcode`#1=11 %
+		|xdef|cd@MacroName{|cd@MacroName#1}%
+		|let|cd@next|cd@Gather%
+	|else%
+		|gdef|cd@NextChar{#1}%
+		|let|cd@next|cd@GobbleSpace%
+		|fi|cd@next}
+|endgroup
+/\AddBlankLine
+
+\DefineMacro\cd@GobbleSpace
+That is, we skip spaces and ends of lines,
+so that the \emph{real} next character will
+be put next to the formed control sequence,
+in case it is an argument.
+
+In case the next argument is none of the above,
+we call "\cd@Evaluate", which will expand the
+macro, on the next character.
+/
+\long\def\cd@GobbleSpace{%
+	\let\cd@next\cd@TakeNextChar
+	\ifx\cd@NextChar\cd@Space
+	\else\ifx\cd@NextChar\cd@Tab
+	\else\ifx\cd@NextChar\cd@EndOfLine
+	\else\ifx\cd@NextChar\cd@Comment
+		\let\cd@next\cd@GobbleEndOfLine
+	\else
+		\egroup
+		\def\cd@next{\expandafter\cd@Evaluate\cd@NextChar}
+	\fi\fi\fi\fi\cd@next}
+/
+
+\DefineMacro\cd@TakeNextChar
+\DefineMacro\cd@GobbleEndOfLine
+These do what they say.
+/
+\long\def\cd@TakeNextChar#1{\gdef\cd@NextChar{#1}\cd@GobbleSpace}
+\begingroup
+\catcode`\^^M=12%
+\gdef\cd@GobbleEndOfLine#1^^M#2{%
+	\gdef\cd@NextChar{#2}%
+	\cd@GobbleSpace}%
+\endgroup
+/
+
+\DefineMacro\cd@Evaluate
+Finally, we take the name thus formed, and
+execute "\"\meta{Name}"@Produce". As you might
+imagine, the only macros containing the "@Produce"
+suffix are defined by \CD. So, most of the time,
+this execution will be no more than a "\relax".
+Which is exactly what we want.
+
+/
+\def\cd@Evaluate{\csname\cd@MacroName @Produce\endcsname}
+/
+
+\codeskip=3cm
+\boxskip=2cm
+\subsection{Macros executed in produce mode}
+To understand what follows, simply remember that
+"\"\meta{Macro}"@Produce" is executed when \CD\
+encounters "\"\meta{Macro}. So, for instance,
+"\ShortVerb@Produce" is "\ShortVerb" in produce mode.
+
+Macro names will become quite long, so we add some
+left margin.\cox[6pt](80,0pt,0pt,You could have done\\that before...)
+
+\DefineMacro\cd@Gobble
+First, some gobbler.
+
+/
+\def\cd@Gobble#1{}
+/
+
+\DefineMacro\cd@PrepareChar
+Macros like "\ShortVerb" can take four kinds of argument.
+If you want "+" to be a "\ShortVerb", you can say "\ShortVerb+",
+"\ShortVerb\+", "\ShortVerb{+}" and "\Short§-Verb{\+}". Since
+\CD\ has already considered the next character when executing
+"\ShortVerb@Produce", its catcode can't be changed, and a left
+brace is of category 12 and a backslash of category 13. So we have
+to gobble the next character if it is one of them.
+
+\leavevmode"\cd@PrepareChar" takes a macro as an argument and replaces
+it in the stream with the next character gobbled or not.
+The backslash is turned into an escape character to handle
+the "\ShortVerb{\+}" case, where the left brace is gobbled;
+the backslash hasn't been read yet, so we can use it.
+/
+\def\cd@PrepareChar#1{%
+	\catcode`\\=0 %
+	\def\cd@next{\expandafter#1\cd@Gobble}
+	\ifx\cd@NextChar\cd@LeftBrace%
+	\else\ifx\cd@NextChar\cd@Escape%
+	\else%
+		\def\cd@next{#1}
+	\fi\fi}%
+/\AddBlankLine
+
+\DefineMacro\ShortVerb@Produce
+\DefineMacro\DefineShortVerb@Produce
+\DefineMacro\cd@VerbList
+Thus, "\ShortVerb@Produce" calls "\cd@PrepareChar" with
+"\cd@MakeShortVerb@Produce", which will do the real job
+to the character. We define \textsf{fancyvrb}'s "\DefineShortVerb"
+to do the same thing. "\cd@VerbList" contains all such characters,
+since "\DefineShortVerb" can define several of them. It will
+be used in writing environments to neutralize them.
+/
+\def\ShortVerb@Produce{\cd@PrepareChar\cd@MakeShortVerb@Produce\cd@next}
+\let\DefineShortVerb@Produce\ShortVerb@Produce
+\def\cd@VerbList{}
+/
+
+\DefineMacro\cd@MakeShortVerb@Produce
+Now we inform the user that the character was "\ShortVerb"'ed.
+/
+\def\cd@MakeShortVerb@Produce#1{%
+	\cd@TChar{#1}{ShortVerb}
+/
+
+\noindent We add it to "\cd@VerbList".
+/
+	\expandafter\def\expandafter\cd@VerbList\expandafter{\cd@VerbList#1,}
+/
+
+\DefineMacro\cd@ShortVerb@Produce
+\DefineMacro\UndoShortVerb@Produce
+And we simply define the character to gobble everything
+until its next occurrence. We also define the "\Undo..." variant.
+/
+	\lccode`\~=`#1 %
+	\lowercase{%
+		\def~{\bgroup\let\do\@makeother\dospecials\catcode`#1\active\cd@ShortVerb@Produce}%
+		\def\cd@ShortVerb@Produce##1~{\egroup}}%
+	\def\UndoShortVerb@Produce{\cd@TUChar{ShortVerb}\catcode`#1=12\relax}%
+	\catcode`#1=13 %
+	\catcode`\\=13\relax}
+\let\UndoShortVerb@Produce\relax
+/
+
+\DefineMacro\UndefineShortVerb@Produce
+\DefineMacro\cd@UndefineShortVerb@Produce
+We define a variant for \textsf{fancyvrb}, because it
+takes an argument.\vskip5pt
+/
+\def\UndefineShortVerb@Produce{\cd@PrepareChar\cd@UndefineShortVerb@Produce\cd@next}%
+\def\cd@UndefineShortVerb@Produce#1{
+	\cd@TUChar{ShortVerb (from fancyvrb)}
+	\catcode`#1=12 \catcode`\\=13\relax}
+/\AddBlankLine
+
+\DefineMacro\VerbBreak@Produce
+\DefineMacro\cd@MakeVerbBreak@Produce
+\DefineMacro\cd@IgnoreVerbBreak
+\DefineMacro\UndoVerbBreak@Produce
+In produce mode, the "\VerbBreak" character is simply ignored.\vskip5pt
+/
+\def\VerbBreak@Produce{\cd@PrepareChar\cd@MakeVerbBreak@Produce\cd@next}
+\def\cd@MakeVerbBreak@Produce#1{
+	\cd@TChar{#1}{VerbBreak}
+	\def\cd@IgnoreVerbBreak{\catcode`#1=9\relax}
+	\def\UndoVerbBreak@Produce{\cd@TUChar{VerbBreak}\let\cd@IgnoreVerbBreak\relax}
+	\catcode`\\=13\relax}
+\let\cd@IgnoreVerbBreak\relax
+\let\UndoVerbBreak@Produce\relax
+/
+
+\DefineMacro\cd@GobbleOptions
+This is useful for "\ShortCode" and also "\NewExample"
+/
+\def\cd@GobbleOptions#1[#2]#3{\def\cd@NextChar{#3}\expandafter#1\cd@NextChar}
+/\AddBlankLine
+
+\DefineMacro\ShortCode@Produce
+We check for options.
+/
+\def\ShortCode@Produce{%
+	\ifx\cd@NextChar\cd@LeftBracket%
+		\def\cd@next{\cd@GobbleOptions\ShortCode@Produce}%
+	\else%
+	\cd@PrepareChar\cd@MakeShortCode@Produce
+	\fi\cd@next}
+/
+
+\DefineMacro\cd@MakeShortcode@Produce
+\DefineMacro\cd@ShortWriteFile
+\DefineMacro\ActivateShortCode@Produce
+\DefineMacro\cd@UndoShortCode@Produce
+The "\ShortCode" character in produce mode is similar
+to its counterpart in normal mode, except that it
+follows what "code" does in this mode. So give a
+look at the definition of the code environment to
+understand what is going on here.
+/
+\begingroup
+\catcode`\^^M13%
+\gdef\cd@MakeShortCode@Produce#1{%
+	\cd@TChar{#1}{ShortCode}
+	\lccode`\~=`#1%
+	\lowercase{%
+	\def~{\cd@ProduceLine\inputlineno\cd@ShortCodetrue\cd@CodeWrite}%
+	\def\ActivateShortCode@Produce{\catcode`#1\active}%
+	\def\cd@ShortWriteFile##1^^M##2~{%
+		^^M##2^^?^^M^^?%
+		\ifx\cd@NoFileWarning\relax%
+			\cd@TCode%
+		\else%
+			\cd@NoFileWarning%
+		\fi\egroup}}%
+	\def\UndoShortCode@Produce{\cd@TUChar{ShortCode}\catcode`#1=12\relax}%
+	\catcode`\\=13 %
+	\catcode`#1=13\relax}%
+\endgroup
+\let\ActivateShortCode@Produce\relax
+\let\UndoShortCode@Produce\relax
+/\AddBlankLine
+
+\DefineMacro\VerbCommand@Produce
+\DefineMacro\cd@VerbEscape@Produce
+\DefineMacro\cd@TempEsc
+"\VerbCommand" characters do what they do in
+"\CodeOutput" in normal mode. The escape gobble
+letters and the braces gobble what they contain.
+
+First, we store the escape character for the message.
+/
+\def\VerbCommand@Produce{\cd@PrepareChar\cd@VerbEscape@Produce\cd@next}
+\def\cd@VerbEscape@Produce#1{
+	\bgroup\escapechar\m@ne\xdef\cd@TempEsc{\string#1}\egroup
+/
+
+\DefineMacro\cd@IgnoreEscape@Produce
+Then we turn it into a letter gobbler.
+/
+	\def\cd@IgnoreEscape@Produce{
+		\catcode`#1=13 
+		\lccode`\~=`#1 
+		\lowercase{\def~{\cd@GobbleLetters}}}
+/
+
+\noindent This is not what you think it is.
+We're not considering whether the character to come
+is a left brace, but whether "\cd@NextChar", i.e. the
+character following "\VerbCommand", \emph{was}
+a left brace; this means that a right brace is to come,
+and we want to gobble it before processing what follows.
+/
+		\ifx\cd@NextChar\cd@LeftBrace
+			\def\cd@next{\expandafter\cd@VerbBraces@Produce\cd@Gobble}
+		\else
+			\let\cd@next\cd@VerbBraces@Produce
+		\fi\cd@next}
+/
+
+\DefineMacro\cd@VerbBraces@Produce
+\IgnorePrefix{cd@@}
+\DefineMacro\cd@@VerbBraces@Produce
+\IgnorePrefix{cd@}
+\DefineMacro\cd@IgnoreBraces@Produce
+\DefineMacro\UndoVerbCommand@Produce
+The rest is pretty straightforward and similar
+to what we did in normal mode.
+/
+\def\cd@VerbBraces@Produce{\catcode`\{=1 \catcode`\}=2 \cd@@VerbBraces@Produce}
+\def\cd@@VerbBraces@Produce#1#2{%
+	\expandafter\cd@TChar\expandafter{\cd@TempEsc', `\string#1' and `\string#2'}{VerbCommand}
+	\def\cd@IgnoreBraces@Produce{%
+		\catcode`#1=13 
+		\lccode`\~=`#1 
+		\lowercase{\def~####1#2{}}}
+	\catcode`\\=13 \catcode`\{=12 \catcode`\}=12\relax}
+\def\UndoVerbCommand@Produce{
+	\cd@TUChar{VerbCommand}
+	\let\cd@IgnoreEscape@Produce\relax
+	\let\cd@IgnoreBraces@Produce\relax}
+\let\cd@IgnoreEscape@Produce\relax
+\let\cd@IgnoreBraces@Produce\relax
+/\AddBlankLine
+
+\DefineMacro\CodeEscape@Produce
+\DefineMacro\cd@CodeEscape@Produce
+\DefineMacro\cd@ActivateCodeEscape
+\DefineMacro\UndoCodeEscape@Produce
+"\CodeEscape" is easy: we simply define a macro to turn
+the character into an escape in code contexts.
+/
+\def\CodeEscape@Produce{\cd@PrepareChar\cd@CodeEscape@Produce\cd@next}
+\def\cd@CodeEscape@Produce#1{%
+	\cd@TChar{#1}{CodeEscape}
+	\def\cd@ActivateCodeEscape{\catcode`#1=0\relax}\catcode`\\=13\relax}
+\let\cd@ActivateCodeEscape\relax
+\def\UndoCodeEscape@Produce{\cd@TUChar{CodeEscape}\let\cd@ActivateCodeEscape\relax}	
+/\AddBlankLine
+
+\DefineMacro\NewExample@Produce
+\DefineMacro\RenewExample@Produce
+These two macros launch the option gobbler
+if there are any. "\cd@DangerousExample@Produce"
+is defined later because it takes its argument
+between braces of category 12, like other macros.
+/
+\def\NewExample@Produce{%
+	\ifx\cd@NextChar\cd@LeftBracket%
+		\def\cd@next{\cd@GobbleOptions\NewExample@Produce}%
+	\else%
+		\let\cd@next\cd@DangerousExample@Produce%
+	\fi\cd@next}
+\let\RenewExample@Produce\NewExample@Produce
+/\AddBlankLine
+
+\IgnorePrefix{cd@@}
+\DefineMacro\cd@@Evaluate
+\IgnorePrefix{cd@}
+\DefineMacro\StartIgnore@Produce
+\DefineMacro\cd@FindIgnore
+\DefineMacro\cd@StopIgnore
+Ignoring the input boils down to modifying the
+definition of "\cd@Evaluate" until it founds
+"\StopIgnore". Meanwhile, it does nothing.
+/
+\let\cd@@Evaluate\cd@Evaluate
+\def\StartIgnore@Produce{
+	\cd@Tracing{\string\StartIgnore\space found. I will ignore everything from now on}
+	\let\cd@Evaluate\cd@FindIgnore}
+\def\cd@FindIgnore{
+	\expandafter\ifx\csname cd@\cd@MacroName\endcsname\cd@StopIgnore
+		\cd@Tracing{\string\StopIgnore\space found. I resume my normal behavior}
+		\let\cd@Evaluate\cd@@Evaluate
+	\fi}
+\def\cd@StopIgnore{\cd@StopIgnore}
+/\AddBlankLine
+
+\DefineMacro\verb@Produce
+\DefineMacro\cd@VerbEater
+\IgnorePrefix{cd@@}
+\DefineMacro\cd@@VerbEater
+\IgnorePrefix{cd@}
+The produce version of \LaTeX's "\verb"
+gobbles its argument after it has checked for
+a star.
+/
+\def\verb@Produce{\count@=0 \cd@VerbEater}
+\def\cd@VerbEater#1{%
+	\ifcase\count@ %
+		\ifx#1*
+			\count@=1 %
+			\let\cd@@VerbEater\cd@VerbEater
+		\else
+			\def\cd@@VerbEater##1#1{}
+		\fi
+	\else
+		\def\cd@@VerbEater##1#1{}
+	\fi\cd@@VerbEater}
+/\AddBlankLine
+
+\DefineMacro\DescribeMacro@Produce
+\DefineMacro\DefineMacro@Produce
+\DefineMacro\DescribeEnvironment@Produce
+\DefineMacro\DefineEnvironment@Produce
+\DefineMacro\noexpand@Produce
+\DefineMacro\string@Produce
+\DefineMacro\protect@Produce
+The normal counterparts of these might take dangerous
+arguments, so we need to neutralize them. The first
+four gobble two tokens, i.e. a left brace and"/"or
+an escape character, so the following macro won't form.
+The last three just gobble the escape character.
+/
+\def\DescribeMacro@Produce#1#2{}
+\def\DefineMacro@Produce#1#2{}
+\def\DescribeEnvironment@Produce#1#2{}
+\def\DefineEnvironment@Produce#1#2{}
+\def\noexpand@Produce#1{}
+\def\string@Produce#1{}
+\def\protect@Produce#1{}
+/
+
+\DefineMacro\begin@Produce
+\DefineMacro\end@Produce
+"\begin" and "\end" statements are executed\cox[6pt](120,0pt,22pt,Stop executing things!\\They're innocent!)
+if and only if there follows a left brace. This
+decreases the number of possible errors. The double-"@"
+versions take their arguments in `other' braces, so they
+are defined later.
+/
+\def\begin@Produce{
+	\ifx\cd@NextChar\cd@LeftBrace
+		\expandafter\begin@@Produce
+	\fi}
+\def\end@Produce{
+	\ifx\cd@NextChar\cd@LeftBrace
+		\expandafter\end@@Produce
+	\fi}
+/\AddBlankLine
+
+\DefineMacro\Gobble@Produce
+The produce version of "\Gobble" is similar
+to the normal version, except that it take cares
+of braces. "\Gobble@@Produce" is defined below.
+/
+\def\Gobble@Produce#1{%
+	\ifx\cd@NextChar\cd@LeftBrace%
+		\def\cd@next{\expandafter\Gobble@@Produce\cd@NextChar}
+	\else
+		\def\cd@next{\chardef\cd@GobbleNum=#1\relax}%
+	\fi\cd@next}
+/
+
+\DefineMacro\Header@Produce
+\DefineMacro\cd@HeaderEOL
+The header is an easy matter. The only thing not to
+forget is to change the catcode of \bslash back to 0.
+\begin{code}
+\newif\ifcd@HeaderFirstLine
+\begingroup
+\catcode`\^^M=13 %
+\catcode`\/=14 %
+\catcode`\%=12 /
+\gdef\Header@Produce{/
+	\bgroup/
+	\catcode`\^^M=13 /
+	\catcode`\%=12 /
+	\catcode`\\=0 /
+	\Header@@Produce}/
+\gdef\cd@HeaderEOL{\def^^M{^^J% }}
+\endgroup
+\end{code}\AddBlankLine
+
+\DefineMacro\cd@DocumentString
+\DefineMacro\cd@CodeString
+\DefineMacro\cd@StarCodeString
+\DefineMacro\cd@InvisibleString
+\DefineMacro\cd@StoredEnvironments
+We'll need these presently.
+/
+\def\cd@DocumentString{document}
+\def\cd@CodeString{code}
+\def\cd@StarCodeString{code*}
+\def\cd@InvisibleString{invisible}
+\def\cd@StoredEnvironments{example,verbatim,Verbatim,BVerbatim,¨LVerbatim,SaveVerbatim,VerbatimOut,Example,CenterExample,¨SideBySideExample,PCenterExample,PSideBySideExample,}
+/\AddBlankLine
+
+Here comes the macros that take their arguments
+bewteen braces of category 12.
+/
+\begingroup
+\catcode`\{=12 %
+\catcode`\}=12 %
+\catcode`\<=1 %
+\catcode`\>=2 %
+/
+
+\DefineMacro\Header@@Produce
+This defines "\cd@Header", which is executed in
+"\ProduceFile", to write the text input by the user
+to the newly opened file. The group we close was
+opened in "\Header@Produce".
+/
+\long\gdef\Header@@Produce{#1}<
+	\gdef\cd@Header<\bgroup\cd@HeaderEOL\cd@ProduceFile<\cd@Comment\space#1>\egroup>
+	\egroup>
+/\AddBlankLine
+
+\DefineMacro\Gobble@@Produce
+This is launched by "\Gobble@Produce"
+/
+\gdef\Gobble@@Produce{#1}<\chardef\cd@GobbleNum=#1\relax>
+/\AddBlankLine
+
+\DefineMacro\DangerousEnvironment@Produce
+\DefineMacro\cd@DangerousExample@Produce
+\DefineMacro\DefineVerbatimEnvironment
+Here we add dangerous environments to the list above,
+to be checked below. 
+
+\noindent\indent"\cd@DangerousExample@Produce" has such a cumbersome
+definition because it is meant to gobble the remaining
+three arguments of "\NewExample" and "\RenewExample".
+They might be separated by spaces, and since spaces
+have category 12 in produce mode, they won't be
+skipped and "\cd@DangerousExample@Produce" wouldn't
+match its definition, as \TeX\ likes to say.
+/
+\gdef\DangerousEnvironment@Produce{#1}<
+	\cd@Tracing<#1 added to dangerous environments>
+	\xdef\cd@StoredEnvironments<\cd@StoredEnvironments#1,>>
+\gdef\cd@DangerousExample@Produce{#1}#2{#3}#4{#5}#6{#7}<
+	\cd@Tracing<#1 added to dangerous environments (CodeDoc examples)>
+	\xdef\cd@StoredEnvironments<\cd@StoredEnvironments#1,>>
+\let\DefineVerbatimEnvironment@Produce\DangerousEnvironment@Produce
+/\AddBlankLine
+
+\DefineMacro\begin@@Produce
+"\begin" statements simply check their argument:
+if it is "code", "code*" or "invisible", it turns
+to writing mode. Otherwise, the name of the argument
+is checked against the list of dangerous environments.
+See below where normal braces are restored.
+/
+\gdef\begin@@Produce{#1}<
+	\def\cd@TempArg<#1>
+	\ifx\cd@TempArg\cd@CodeString
+		\let\cd@next\cd@CodeWrite
+	\else\ifx\cd@TempArg\cd@StarCodeString
+		\cd@Startrue
+		\let\cd@next\cd@CodeWrite
+	\else\ifx\cd@TempArg\cd@InvisibleString
+		\cd@Invisibletrue
+		\let\cd@next\cd@CodeWrite
+	\else
+		\def\cd@next<\cd@CheckEnvironment<#1>>
+	\fi\fi\fi\cd@next>
+/
+
+\DefineMacro\end@Produce
+There's only one thing that can wake an "\end"
+statement: "document". If it finds "\end{document}",
+\CD\ stops. Otherwise, "\end" statements are ignored.
+/
+\gdef\end@@Produce{#1}<
+	\def\cd@TempArg<#1>
+	\ifx\cd@TempArg\cd@DocumentString
+		\def\cd@next<\cd@Tracing<\string\end{document}>
+		\ifnum\cd@tracingmode=0 %
+		\else
+			\immediate\write17<^^J*** END OF CODEDOC REPORT ***^^J>
+		\fi\@@end>
+	\else
+		\let\cd@next\relax
+	\fi\cd@next>
+/
+
+\DefineMacro\ProduceFile@Produce
+\DefineMacro\CloseFile@Produce
+We define these right now, to be used later.
+/
+\gdef\ProduceFile@Produce{#1}<\ProduceFile@@Produce<#1>>
+\gdef\CloseFile@Produce{#1}<\CloseFile@@Produce<#1>>
+/\AddBlankLine
+
+\DefineMacro\input@Produce
+\DefineMacro\cd@CurrentSource
+We need a terribly boring definition of "\input"
+for the default header, so that files are properly
+tracked back to their source. Besides, "\input" in
+\TeX's way, i.e. without braces, is not allowed anymore,
+if it is to be read by \CD\ in produce mode. I feel
+like removing the whole thing altogether.
+/
+\newcount\cd@InputDepth
+\gdef\input@Produce{#1}<
+	\cd@Tracing<\string\input\space file #1>
+	\expandafter\let\csname cd@MasterSource\the\cd@InputDepth\endcsname\cd@CurrentSource
+	\edef\cd@CurrentSource<#1 (\string\input\space in \cd@CurrentSource)>
+	\advance\cd@InputDepth1\relax
+	\@@input #1\relax
+	\advance\cd@InputDepth-1\relax
+	\expandafter\let\expandafter\cd@CurrentSource\csname cd@MasterSource¨\the\cd@InputDepth\endcsname>
+/\AddBlankLine
+
+\DefineMacro\cd@MakeSpecialEater
+\DefineMacro\cd@SpecialEater
+If we find a dangerous environment, we launch
+this on its name, which eats everything until
+"\end"\marg{Name}.
+/
+\catcode`\|=0 %
+\catcode`\\=13 %
+|gdef|cd@MakeSpecialEater#1<
+	|long|def|cd@SpecialEater##1\end{#1}<>
+	|cd@SpecialEater>
+|endgroup
+/\AddBlankLine
+
+\DefineMacro\cd@CurrentSource
+Back to normal braces. This is a default value needed
+in "\input@Produce". The extension is just a guess, of
+course.
+/
+\edef\cd@CurrentSource{\jobname.tex}
+/\AddBlankLine
+
+\DefineMacro\cd@CheckEnvironment
+\IgnorePrefix{cd@@}
+\DefineMacro\cd@@CheckEnvironment
+\IgnorePrefix{cd@}
+This is the checking mechanism used in "\begin"
+statement to detect dangerous environments. Note
+that we check all environments in their starred
+version too.
+/
+\def\cd@CheckEnvironment#1{
+	\def\cd@TempEnv{#1}
+	\expandafter\cd@@CheckEnvironment\cd@StoredEnvironments cd@end,}
+\def\cd@@CheckEnvironment#1,{
+	\def\cd@@TempEnv{#1}
+	\def\cd@@StarTempEnv{#1*}
+	\ifx\cd@@TempEnv\cd@end
+		\let\cd@next\relax
+	\else\ifx\cd@@TempEnv\cd@TempEnv
+		\def\cd@next{\cd@MakeSpecialEater{#1}}
+	\else\ifx\cd@@StarTempEnv\cd@TempEnv
+		\def\cd@next{\cd@MakeSpecialEater{#1*}}
+	\else
+		\let\cd@next\cd@@CheckEnvironment
+	\fi\fi\fi
+	\cd@next}
+/
+
+
+\subsection{Writing environments}
+\CD\ looks for "code", "code*" and "invisible" environments
+and process them line by line.
+
+\DefineMacro\cd@MakeOther
+First, we need a recursive catcode changer.
+/
+\def\cd@MakeOther#1,{%
+	\def\cd@TempArg{#1}%
+	\ifx\cd@TempArg\cd@end%
+	\else%
+		\catcode`#1=12 %
+		\expandafter\cd@MakeOther%
+	\fi}
+/\AddBlankLine
+
+\DefineMacro\cd@CodeWrite
+This is the writing macro, called by "\begin"
+when the appropriate argument is found, or
+by the "\ShortCode" character. "\dospecials"
+is probably useless since all specials are
+already done, but at least it changes the
+category of the escape and the comment.
+/
+\newif\ifcd@Invisible
+\begingroup
+\catcode`\^^M=13\relax%
+\gdef\cd@CodeWrite{%
+	\bgroup%
+		\let\do\@makeother%
+		\dospecials%
+		\catcode`\^^I=12 %
+/
+
+\noindent We turn all verb characters (defined
+by \textsf{fancyvrb}'s "\DefineShortVerb") into
+other characters, ignore the verb break, neutralize
+the short code if we're not in a short code environment
+(the redefinition of "\cd@TUChar" just prevents an
+unwanted message sent to the user if "tracing" is 2)
+an reactivate it otherwise,
+ignore "\VerbCommand" and activate "\CodeEscape".
+We turn ends of lines into proper gobbler once again.
+/
+		\expandafter\cd@MakeOther\cd@VerbList cd@end,%
+		\cd@IgnoreVerbBreak%
+		\ifcd@ShortCode%
+			\ActivateShortCode@Produce%
+		\else%
+			\let\cd@TempTUChar\cd@TUChar
+			\def\cd@TUChar##1{}
+			\UndoShortCode@Produce%
+			\let\cd@TUChar\cd@TempTUChar
+		\fi%
+		\cd@IgnoreEscape@Produce%
+		\cd@IgnoreBraces@Produce%
+		\cd@ActivateCodeEscape%
+		\catcode`\^^M=13\relax%
+		\let^^M\cd@produceEOL%
+/
+
+\noindent Finally we launch the adequate macro.
+They all do the same thing, but they look for
+different "\end" statements.
+/
+		\ifcd@ShortCode%
+			\global\cd@ShortCodefalse\let\cd@next\cd@ShortWriteFile%
+		\else\ifcd@Star%
+			\global\cd@Starfalse\let\cd@next\cd@StarWriteFile%
+		\else\ifcd@Invisible%
+			\global\cd@Invisiblefalse\let\cd@next\cd@InvisibleWriteFile%
+		\else%
+			\let\cd@next\cd@WriteFile%
+		\fi\fi\fi\cd@next}%
+/
+
+\DefineMacro\cd@ProduceEOL
+\DefineMacro\cd@LineWrite@Produce
+This is similar to the version for examples 
+without \eTeX\ in normal mode, i.e. it writes
+to an external file, specified in "\cd@ProduceFile".
+/
+\gdef\cd@produceEOL#1{%
+	\ifx#1^^?%
+		\cd@GobbleCount=0 %
+		\let^^M\relax%
+		\let\cd@next\relax%
+	\else\ifx#1^^M%
+		\cd@GobbleCount=0 %
+		\def\cd@next{\cd@ProduceFile{}\cd@produceEOL}%
+	\else\ifnum\cd@GobbleCount=\cd@GobbleNum%
+		\cd@GobbleCount=0 %
+		\def\cd@next{\cd@LineWrite@Produce#1}%
+	\else%
+		\advance\cd@GobbleCount1 %
+		\let\cd@next\cd@produceEOL%
+	\fi\fi\fi\cd@next}%
+\gdef\cd@LineWrite@Produce#1^^M{\cd@ProduceFile{#1}\cd@produceEOL}%
+/
+
+\DefineMacro\cd@WriteFile
+\DefineMacro\cd@StarWriteFile
+\DefineMacro\cd@InvisibleWriteFile
+And here is the end. It is the first "^^M", "\let"
+to "\cd@ProduceEOL", which launches everything.
+The conditional switches between an error message
+(no file in production) and a report (code written).
+/
+\catcode`|=0 %
+\catcode`<=1 %
+\catcode`>=2 %
+\catcode`{=12 %
+\catcode`}=12 %
+\catcode`\\=12 %
+|long|gdef|cd@WriteFile#1^^M#2\end{code}<%
+	^^M#2^^?^^M^^?%
+	|ifx|cd@NoFileWarning|relax%
+		|cd@TCode%
+	|else%
+		|cd@NoFileWarning%
+	|fi|egroup>%
+|long|gdef|cd@StarWriteFile#1^^M#2\end{code*}<%
+	^^M#2^^?^^M^^?%
+	|ifx|cd@NoFileWarning|relax%
+		|cd@TCode%
+	|else%
+		|cd@NoFileWarning%
+	|fi|egroup>%
+|long|gdef|cd@InvisibleWriteFile#1^^M#2\end{invisible}<%
+	^^M#2^^?^^M^^?%
+	|ifx|cd@NoFileWarning|relax%
+		|cd@TCode%
+	|else%
+		|cd@NoFileWarning%
+	|fi|egroup>%
+|endgroup
+/\AddBlankLine
+
+
+
+
+
+\subsection{File management}
+This the final step: handling files in produce mode.\cox[9pt](120,-6cm,30pt,This sounds strange)
+
+\DefineMacro\cd@Closed
+\DefineMacro\cd@Open
+\DefineMacro\cd@Wait
+First, some keywords.
+/
+\def\cd@Closed{closed}
+\def\cd@Open{open}
+\def\cd@Wait{wait}
+/\AddBlankLine
+
+\DefineMacro\cd@CurrentFile
+\DefineMacro\cd@ProduceFile
+\DefineMacro\AddBlankLine@Produce
+Some basic definitions. "\@unused" is \LaTeX's
+unattributed stream for messages. We let it write
+to he log file. "\cd@ProduceFile" is the writing
+macro (used in writing environments above); as long
+as no file is open, it does nothing.
+/
+\newcount\cd@ProduceCount
+
+\def\cd@CurrentFile{}
+\chardef\@unused=17
+		
+\def\cd@ProduceFile#1{}
+\def\AddBlankLine@Produce{\cd@ProduceFile{}}
+/\AddBlankLine
+
+\DefineMacro\ProduceFile@@Produce
+This is called by "\ProduceFile", via "\ProduceFile@Produce"
+above. If the file is closed ore already in production,
+we signal it to the user:
+/
+\def\ProduceFile@@Produce#1{%
+	\let\cd@next\relax
+	\expandafter\ifx\csname #1@Status\endcsname\cd@Closed
+		\cd@CDError{%
+		File `#1' has already been closed.^^J%
+		If I open it again, it will be erased.^^J%
+		I can't do that. I quit. Sorry.}
+		\let\cd@next\@@end
+	\else\expandafter\ifx\csname #1@Status\endcsname\cd@Open
+		\cd@CDWarning{%
+		File `#1' is currently in production.^^J%
+		Why do you try to open it again?}
+/
+
+\noindent The file is waiting if it has been opened previously
+and another one has been opened too afterward, provided
+"autoclose" is off. In which case, we set it to "open":
+/
+	\else\expandafter\ifx\csname #1@Status\endcsname\cd@Wait
+		\expandafter\let\csname #1@Status\endcsname\cd@Open
+/
+
+\noindent We disable the warning about the absence of
+a file in production and define "\cd@ProduceFile" to
+write to this file.
+/
+		\let\cd@NoFileWarning\relax
+		\def\cd@ProduceFile{\immediate\write\csname #1@Stream\endcsname}
+/
+
+\noindent We set the current file to "wait" and define
+the one we're dealing with to be the current file.
+/
+		\expandafter\let\csname \cd@CurrentFile @Status\endcsname\cd@Wait
+		\def\cd@CurrentFile{#1}
+/
+
+\noindent Now, if the file has never been opened, we need
+an output stream. If they were all allocated, we look whether
+some were made available thanks to a "\CloseFile".
+/
+	\else\ifnum\cd@ProduceCount>15
+		\chardef\cd@ProduceStream=16
+		\expandafter\cd@FindStream\cd@StreamList cd@end,
+/
+
+\noindent If no stream is found, \CD\ feels so bad that it quits.
+/
+		\ifnum\cd@ProduceStream=16 %
+			\cd@CDError{%
+			No more stream for a new file. Close one with \string\CloseFile\space^^J%
+			(or use the `autoclose' option).^^J%
+			This situation makes me feel bad. I quit.}
+			\let\cd@next\@@end
+/
+
+\noindent Else, we're very happy, and if there is
+already a file in production, we close it or let it
+wait.
+/
+		\else
+			\cd@Tracing{I will now produce file #1}
+			\ifx\cd@CurrentFile\cd@empty
+			\else
+				\ifcd@autoclose
+					\cd@Tracing{I close file \cd@CurrentFile\space (autoclose mode)}
+					\expandafter\let\csname \cd@CurrentFile @Status\endcsname\cd@Closed
+				\else
+					\expandafter\let\csname \cd@CurrentFile @Status\endcsname\cd@Wait
+				\fi
+			\fi
+/
+
+\noindent Then we define our file as the current one,
+let the world know that it is open, allocate the stream
+to its name, open it, etc., and launch a macro to retrieve
+some information if any.
+/
+			\def\cd@CurrentFile{#1}
+			\expandafter\let\csname #1@Status\endcsname\cd@Open
+			\expandafter\chardef\csname #1@Stream\endcsname\cd@ProduceStream
+			\immediate\openout\cd@ProduceStream=#1 %
+			\let\cd@NoFileWarning\relax
+			\def\cd@ProduceFile{\immediate\write\cd@ProduceStream}
+			\let\cd@next\cd@GetFile@Produce
+		\fi
+/
+
+\noindent If there was an available stream in the first
+place, we do exactly the same.
+/
+	\else\chardef\cd@ProduceStream\cd@ProduceCount
+		\cd@Tracing{I will now produce file #1}
+		\ifx\cd@CurrentFile\cd@empty
+		\else
+			\ifcd@autoclose
+				\cd@Tracing{I close file \cd@CurrentFile\space (autoclose mode)}
+				\expandafter\let\csname \cd@CurrentFile @Status\endcsname\cd@Closed
+			\else
+				\expandafter\let\csname \cd@CurrentFile @Status\endcsname\cd@Wait
+			\fi
+		\fi
+		\def\cd@CurrentFile{#1}
+		\expandafter\let\csname #1@Status\endcsname\cd@Open
+		\expandafter\chardef\csname #1@Stream\endcsname\cd@ProduceStream
+		\immediate\openout\cd@ProduceStream=#1 %
+		\let\cd@NoFileWarning\relax
+		\def\cd@ProduceFile{\immediate\write\cd@ProduceStream}
+		\ifcd@autoclose
+		\else
+			\advance\cd@ProduceCount\@ne
+		\fi
+		\let\cd@next\cd@GetFile@Produce
+	\fi\fi\fi\fi\cd@next}
+/\AddBlankLine
+
+\DefineMacro\cd@GetFile@Produce
+\DefineMacro\cd@GetFileName@Produce
+\DefineMacro\cd@GetFileVersion@Produce
+\DefineMacro\cd@GetFileDate@Produce
+This is designed to retrieve optional information
+following "\ProduceFile". We undo the "\ShortVerb"
+and "\ShortCode" because they might appear there.
+(My "\ShortCode" is a slash, which is used in date too.)
+We also set the backslash as an escape character,
+because control sequences might appear here.
+
+In all cases, if nothing follows, and if the "noheader"
+option is off, we write the header to the file.
+/
+\def\cd@GetFile@Produce{
+	\bgroup
+		\UndoShortCode@Produce
+		\UndoShortVerb@Produce
+		\catcode`\\\z@
+		\gdef\FileName{}
+		\gdef\FileVersion{}
+		\gdef\FileDate{}
+		\@ifnextchar[
+			\cd@GetFileName@Produce
+			{\ifcd@noheader\else\cd@Header\fi}}
+\def\cd@GetFileName@Produce[#1]{
+	\xdef\FileName{#1}
+	\@ifnextchar[
+		\cd@GetFileVersion@Produce
+		{\ifcd@noheader\else\cd@Header\fi\egroup}}
+\def\cd@GetFileVersion@Produce[#1]{%
+	\xdef\FileVersion{#1}
+	\@ifnextchar[
+		\cd@GetFileDate@Produce
+		{\ifcd@noheader\else\cd@Header\fi\egroup}}
+\def\cd@GetFileDate@Produce[#1]{%
+	\xdef\FileDate{#1}
+	\ifcd@noheader\else\cd@Header\fi\egroup}
+/\AddBlankLine
+
+\DefineMacro\CloseFile@@Produce
+Closing a file is a lot of uninteresting testing...
+/
+\def\CloseFile@@Produce#1{
+	\ifcd@autoclose
+		\expandafter\ifx\csname #1@Status\endcsname\relax
+			\cd@CDWarning{%
+				You haven't opened `#1'. Closing it does nothing.^^J%
+				Besides, you're in autoclose mode. \string\CloseFile\space is redundant.}
+		\else\expandafter\ifx\csname #1@Status\endcsname\cd@Closed
+			\cd@CDWarning{%
+				`#1' was already closed. Closing it again does nothing.^^J%
+				Besides, you're in autoclose mode. \string\CloseFile\space is redundant.}
+		\else
+			\cd@CDWarning{%
+				You're in autoclose mode.	\string\CloseFile\space is redundant.}
+		\fi\fi%
+	\else
+		\expandafter\ifx\csname #1@Status\endcsname\relax
+			\cd@CDWarning{%
+				You haven't opened `#1'. Closing it does nothing.}
+		\else\expandafter\ifx\csname #1@Status\endcsname\cd@Closed
+			\cd@CDWarning{%
+				`#1' was already closed. Closing it again does nothing.}
+/
+
+\noindent If everything is okay, beside closing
+the file, we also define the no-file warning and neutralize
+the writing macro. We also add the stream allocated
+to that file to "\cd@StreamList", so that it may be retrieved
+if all other streams are unavailable.
+/
+		\else
+			\cd@Tracing{I close file #1}
+			\expandafter\let\csname #1@Status\endcsname\cd@Closed
+			\def\cd@TempFile{#1}
+			\ifx\cd@TempFile\cd@CurrentFile
+				\def\cd@NoFileWarning{\cd@CDWarning{No file in production. ¨This code will be lost.}}
+				\def\cd@ProduceFile##1{}%
+			\fi
+			\edef\cd@StreamList{%
+				\cd@StreamList\expandafter\the\csname #1@Stream\endcsname,}
+	\fi\fi\fi}
+/\AddBlankLine
+
+\DefineMacro\cd@StreamList
+\DefineMacro\cd@BuildList
+The last thing to do is to build that list of streams
+made available by the closing of a file.
+/
+\def\cd@StreamList{}
+\def\cd@BuildList#1cd@end,{\def\cd@StreamList{#1}}
+/
+
+\DefineMacro\cd@FindStream
+When we look for a stream, we simply check
+the content of "\cd@BuildList", and if we find
+the terminator, this means that no stream has been
+made available. Otherwise, we define "\cd@ProduceStream",
+which will be allocated to the file we're trying to open,
+as the first stream we find in the list, and we rebuild
+the latter with the remaining numbers.
+/
+\newif\ifcd@stream
+\def\cd@FindStream#1,{%
+	\def\cd@TempArg{#1}
+	\ifx\cd@TempArg\cd@end
+		\cd@streamfalse
+		\let\cd@@next\relax
+	\else
+		\cd@streamtrue
+		\chardef\cd@ProduceStream=#1 %
+		\let\cd@@next\cd@BuildList
+	\fi\cd@@next}
+/\AddBlankLine
+
+\DefineMacro\cd@Header
+Finally, here's the default header.
+/
+\catcode`\%=12\relax
+\edef\cd@Header{
+\noexpand\cd@ProduceFile{% This is \noexpand\FileName, produced by the CodeDoc class
+^^J% with the `produce' option on.
+^^J%
+^^J% To create the documentation, compile \cd@CurrentSource
+^^J% without the `produce' option.
+^^J%
+^^J% SOURCE: \noexpand\cd@CurrentSource
+^^J% DATE: \noexpand\FileDate
+^^J% VERSION: \noexpand\FileVersion
+}}
+\catcode`\%=14\relax
+/\AddBlankLine
+
+\noindent ... and we say goodbye. The end.\cox[6pt](0,-8pt,10pt,\hskip4pt See you!)
+/
+\makeatother
+/
+
+\def\section*#1{\part{#1}
+\itshape
+This index was generated by the \emph{\texttt{\bslash DescribeMacro}}-like
+commands. It only reports where macros are described (page numbers in
+normal font) and defined (page numbers in italics).
+In the current version, \CD\ does not index macros when used in the code.
+
+Entries are sorted ignoring the \emph{\texttt{cd@}} and \emph{\texttt{cd@@}} prefixes.\vskip1em}
+\let\partname\relax
+\let\thepart\relax
+\catcode`\Z=0 
+\leftskip0pt
+\printindex
+\catcode`\Z=11 
+
+\end{document}
+
diff --git a/Master/texmf-dist/doc/latex/codedoc/README b/Master/texmf-dist/doc/latex/codedoc/README
new file mode 100644
index 00000000000..09e5667b32b
--- /dev/null
+++ b/Master/texmf-dist/doc/latex/codedoc/README
@@ -0,0 +1,31 @@
+This is the file README for the CodeDoc class, v.0.1.
+You'll find complete documentation in CodeDoc-manual.pdf
+
+This class produces code and documentation in a single file without departing from LaTeX's ordinary
+syntax.
+
+
+TO PRODUCE THE DOCUMENTATION:
+Run LaTeX on CodeDoc-manual.tex (better in PDF).
+In the document class options of the latter file,
+you may uncomment the `obeystop' option and/or
+comment out the `index' option to remove the
+implementation from the documentation and/or
+the index.
+Don't forget to run LaTeX and MakeIndex as many
+times as necessary.
+
+TO PRODUCE THE CLASS ITSELF (codedoc.cls):
+Uncomment the `produce' option among the
+class options and run LaTeX on the same file
+(CodeDoc-manual.tex).
+This serves as an illustration only, since
+to do so you already need codedoc.cls, obviously.
+This file should thus be included in any distribution.
+
+
+Licensing of this package is covered by LPPL.
+
+Any reaction is welcome: zappathustra@free.fr
+
+Paul Isambert
diff --git a/Master/texmf-dist/tex/latex/codedoc/codedoc.cls b/Master/texmf-dist/tex/latex/codedoc/codedoc.cls
new file mode 100644
index 00000000000..956226048ff
--- /dev/null
+++ b/Master/texmf-dist/tex/latex/codedoc/codedoc.cls
@@ -0,0 +1,1651 @@
+% %%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%
+% 
+% This is the CodeDoc class, produced by itself
+% with the `produce' option on, from `CodeDoc-manual.tex'.
+% 
+% Date: 2009/04/01
+% Version: v.0.1
+% Author: Paul Isambert
+% 
+% The documentation can be found in `CodeDoc-manual.pdf'
+% (you can produce it with `CodeDoc-manual.tex' without the
+% `produce' option).
+% 
+% This file is published under the LaTeX Project Public License:
+% 
+% Do whatever you want to that software,
+% but if you modify it, change its name to avoid confusion,
+% and if you copy part of the code please mention where it comes from.
+% 
+% Comments, suggestions, bugs and, of course, NOTES:
+% zappathustra@free.fr
+% 
+% %%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%
+
+
+
+\NeedsTeXFormat{LaTeX2e}
+\ProvidesClass{codedoc}[2009/04/01 v.0.1 Code and documentation in one file.]
+\makeatletter
+\catcode`\^^?=13
+
+\newif\ifcd@produce
+\newif\ifcd@autoclose
+\newif\ifcd@obeystop
+\newif\ifcd@makeindex
+\newif\ifcd@noheader
+\newcount\cd@tracingmode
+\cd@tracingmode1
+\def\cd@GetClass{article()}
+
+\DeclareOption{autoclose}{\cd@autoclosetrue}
+\DeclareOption{produce}{\cd@producetrue}
+\DeclareOption{index}{\cd@makeindextrue}
+\DeclareOption{obeystop}{\cd@obeystoptrue}
+\DeclareOption{noheader}{\cd@noheadertrue}
+\DeclareOption{tracing0}{\cd@tracingmode0}
+\DeclareOption{tracing1}{\cd@tracingmode1}
+\DeclareOption{tracing2}{\cd@tracingmode2}
+\DeclareOption*{\edef\cd@GetClass{\CurrentOption()}}
+\ProcessOptions\relax
+
+\def\cd@end{cd@end}
+\ifcd@produce
+\else
+\def\cd@LoadClass#1(#2){%
+	\def\cd@Class{#1}
+	\expandafter\cd@GetOptions#2;cd@end;%
+	\LoadClass{#1}%
+	\@ifnextchar({\expandafter\@gobble\@gobble}{}}
+\def\cd@GetOptions#1;{%
+	\def\cd@TempArg{#1}
+	\ifx\cd@TempArg\cd@end%
+		\let\cd@next\relax
+	\else%
+		\PassOptionsToClass{#1}{\cd@Class}%
+		\let\cd@next\cd@GetOptions%
+	\fi\cd@next}
+\expandafter\cd@LoadClass\cd@GetClass
+
+\ifcd@makeindex
+	\RequirePackage{makeidx}
+	\makeindex
+\else
+	\let\printindex\relax
+\fi
+\ifcd@obeystop
+	\ifcd@makeindex
+		\long\def\StopHere#1{#1\relax\par\printindex\end{document}}
+	\else
+		\long\def\StopHere#1{#1\relax\par\end{document}}
+	\fi
+\else
+	\long\def\StopHere#1{}
+\fi
+\fi
+
+\newif\ifcd@eTeX
+\@ifundefined{eTeXversion}{\cd@eTeXfalse}{\cd@eTeXtrue}
+
+\def\cd@Warning{\ClassWarningNoLine{codedoc}}
+\def\cd@Error#1{\ClassError{codedoc}{#1}{}}
+
+\def\DocStripMarginpar{\reversemarginpar\marginparpush0pt\relax\marginparwidth8pc\relax}
+\def\PrintMacro#1{\noindent\marginpar{\raggedleft\strut\ttfamily#1}\ignorespaces}
+
+\newcount\cd@Index
+\def\hyperpage#1{#1}
+
+\def\DescribeIndexFont#1{\gdef\cdatDescribeFont##1{{#1\hyperpage{##1}}}}
+\DescribeIndexFont{}
+\def\DescribeMacro{\makeatletter\cd@DescribeMacro}
+\def\cd@DescribeMacro#1{%
+	\makeatother%
+	\cd@Index=0 %
+	\cd@MakeEntry#1\cd@EndOfEntry%
+	\PrintMacro{\string#1}}
+\def\DescribeEnvironment{\makeatletter\cd@DescribeEnvironment}
+\def\cd@DescribeEnvironment#1{%
+	\makeatother%
+	\index{#1@\texttt{#1} (environment)|cdatDescribeFont}%
+	\PrintMacro{\string#1}}
+
+\def\DefineIndexFont#1{\gdef\cdatDefineFont##1{{#1\hyperpage{##1}}}}
+\DefineIndexFont{\itshape}
+\def\DefineMacro{\makeatletter\cd@DefineMacro}
+\def\cd@DefineMacro#1{%
+	\makeatother%
+	\cd@Index1 %
+	\cd@MakeEntry#1\cd@EndOfEntry%
+	\PrintMacro{\string#1}}
+\def\DefineEnvironment{\makeatletter\cd@DefineEnvironment}
+\def\DefineEnvironment#1{%
+	\makeatother%
+	\index{#1@\texttt{#1} (environment)|cdatDefineFont}%
+	\PrintMacro{\string#1}}
+
+\def\cd@MakeEntry#1#2\cd@EndOfEntry{%
+	\def\cd@TempEntry{}%
+	\begingroup\escapechar\m@ne\expandafter\cd@AnalyzeEntry\string#1\cd@end\endgroup%
+	\expandafter\cd@AnalyzePrefix\cd@TempEntry\cd@end%
+	\expandafter\cd@@MakeEntry\cd@TempEntry\cd@EndOfEntry}
+\chardef\AtChar=`\@
+\def\cd@AnalyzeEntry#1{%
+	\let\cd@next\cd@AnalyzeEntry%
+	\ifx#1\cd@end%
+		\let\cd@next\relax%
+	\else\if#1@%
+		\expandafter\gdef\expandafter\cd@TempEntry\expandafter{\cd@TempEntry\AtChar}%
+	\else%
+		\expandafter\gdef\expandafter\cd@TempEntry\expandafter{\cd@TempEntry#1}%
+	\fi\fi\cd@next}
+
+\newcount\cd@PrefixCount
+\def\IgnorePrefix#1{\cd@PrefixCount\z@\def\Prefix{}\cd@IgnorePrefix#1\cd@end}
+\def\cd@IgnorePrefix#1{%
+	\let\cd@next\cd@IgnorePrefix%
+	\ifx#1\cd@end%
+		\def\cd@next{\expandafter\cd@ScanPrefix\Prefix\cd@end}%
+	\else\if#1@%
+		\expandafter\def\expandafter\Prefix\expandafter{\Prefix\AtChar}%
+	\else%
+		\edef\cd@PrefixLetter{\string#1}%
+		\expandafter\cd@MakePrefix\cd@PrefixLetter%
+	\fi\fi\cd@next}
+\def\cd@MakePrefix#1{%
+	\expandafter\def\expandafter\Prefix\expandafter{\Prefix#1}}%
+\def\cd@ScanPrefix#1{%
+	\ifx#1\cd@end%
+		\let\cd@next\cd@DefPrefix%
+	\else%
+		\advance\cd@PrefixCount\@ne%
+		\let\cd@next\cd@ScanPrefix%
+	\fi\cd@next}
+\def\cd@DefPrefix{%
+	\ifcase\cd@PrefixCount%
+		\def\cd@AnalyzePrefix##1\cd@end{}%
+	\or\def\cd@AnalyzePrefix##1##2\cd@end{%
+		\def\cd@TempPrefix{##1}\def\cd@RestOfEntry{##2}\cd@ComparePrefix}%
+	\or\def\cd@AnalyzePrefix##1##2##3\cd@end{%
+		\def\cd@TempPrefix{##1##2}\def\cd@RestOfEntry{##3}\cd@ComparePrefix}%
+	\or\def\cd@AnalyzePrefix##1##2##3##4\cd@end{%
+		\def\cd@TempPrefix{##1##2##3}\def\cd@RestOfEntry{##4}\cd@ComparePrefix}%
+	\or\def\cd@AnalyzePrefix##1##2##3##4##5\cd@end{%
+		\def\cd@TempPrefix{##1##2##3##4}\def\cd@RestOfEntry{##5}\cd@ComparePrefix}%
+	\or\def\cd@AnalyzePrefix##1##2##3##4##5##6\cd@end{%
+		\def\cd@TempPrefix{##1##2##3##4##5}\def\cd@RestOfEntry{##6}\cd@ComparePrefix}%
+	\or\def\cd@AnalyzePrefix##1##2##3##4##5##6##7\cd@end{%
+		\def\cd@TempPrefix{##1##2##3##4##5##6}\def\cd@RestOfEntry{##7}\cd@ComparePrefix}%
+	\or\def\cd@AnalyzePrefix##1##2##3##4##5##6##7##8\cd@end{%
+		\def\cd@TempPrefix{##1##2##3##4##5##6##7}\def\cd@RestOfEntry{##8}\cd@ComparePrefix}%
+	\or\def\cd@AnalyzePrefix##1##2##3##4##5##6##7##8##9\cd@end{%
+		\def\cd@TempPrefix{##1##2##3##4##5##6##7##8}\def\cd@RestOfEntry{##9}\cd@ComparePrefix}%
+	\fi\ignorespaces}
+\newif\ifcd@Prefix
+\def\cd@ComparePrefix{%
+	\ifx\cd@TempPrefix\Prefix%
+		\expandafter\def\expandafter\cd@TempEntry\expandafter{\cd@RestOfEntry}%
+		\cd@Prefixtrue%
+	\else%
+		\cd@Prefixfalse%
+	\fi}
+\def\cd@@MakeEntry#1\cd@EndOfEntry{%
+	\ifcd@Prefix%
+		\ifcase\cd@Index%
+			\index{#1@\texttt{\char\escapechar\PrintPrefix\Prefix#1}|cdatDescribeFont}%
+		\or%
+			\index{#1@\texttt{\char\escapechar\PrintPrefix\Prefix#1}|cdatDefineFont}%
+		\fi%
+	\else%
+	\ifcase\cd@Index%
+			\index{#1@\texttt{\char\escapechar#1}|cdatDescribeFont}%
+		\or%
+			\index{#1@\texttt{\char\escapechar#1}|cdatDefineFont}%
+		\fi%
+	\fi}
+
+\IgnorePrefix{}%
+\let\PrintPrefix\relax
+
+\def\meta#1{{\ensuremath\langle\emph{#1}\ensuremath\rangle}}
+\def\marg#1{\texttt{\{}\meta{#1}\texttt{\}}}
+\def\oarg#1{\texttt{[}\meta{#1}\texttt{]}}
+\def\parg#1{\texttt{(}\meta{#1}\texttt{)}}
+\def\cd@bslash{\char`\\}
+\def\bslash{\texorpdfstring{\cd@bslash}{\string\\}}
+\AtBeginDocument{\@ifundefined{texorpdfstring}{\def\texorpdfstring#1#2{#1}}{}}
+\def\cd@CharErr#1#2{%
+	\bgroup
+		\escapechar\m@ne
+		\cd@Error{You can't use \string#1 for \string\\#2}
+	\egroup}
+
+\newif\ifcd@BadChar
+
+\def\cd@BadChar#1#2{%
+	\cd@BadChartrue
+	\ifcase\catcode`#1 % \
+		\cd@CharErr{\\}{#2}%
+	\or% {
+		\cd@CharErr{\{}{#2}%
+	\or% }
+		\cd@CharErr{\}}{#2}%
+	\or% $
+		\cd@BadCharfalse%
+	\or% &
+		\cd@BadCharfalse%
+	\or% ^^M
+	\or% #
+		\cd@BadCharfalse%
+	\or% ^
+		\cd@BadCharfalse%
+	\or% _
+		\cd@BadCharfalse%
+	\or% Ignored
+	\or% Spaces
+		\cd@CharErr{spaces}{#2}%
+	\or% Letters
+		\cd@CharErr{letters}{#2. \MessageBreak That's really bad}%
+	\or% Other
+		\cd@BadCharfalse%
+	\or% Active
+		\cd@CharErr{#1}{#2 - it's already active}%
+	\or% %
+		\cd@CharErr{#1}{#2}%
+	\fi}
+
+\def\cd@UndoErr#1{%
+	\bgroup%
+		\escapechar\m@ne%
+		\cd@Error{%
+			There is no \string\\\string#1\space defined.\MessageBreak%
+			\string\\Undo\string#1\space on line \the\inputlineno\space is useless}%
+	\egroup}
+\def\cd@DefErr#1#2{%
+	\bgroup%
+	\escapechar\m@ne%
+		\expandafter\xdef\csname cd@#2Error\endcsname{%
+			\noexpand\cd@Error{%
+				You've already defined \string#1 as a \string\\#2\noexpand\MessageBreak%
+				on l. \the\inputlineno. You can't have two.\noexpand\MessageBreak%
+				Say \string\\Undo#2\space and then \string\\#2\space to change}}%
+	\egroup}
+
+\newif\ifcd@ShortVerb
+
+\def\ShortVerb#1{%
+	\cd@BadChar{#1}{ShortVerb}%
+	\ifcd@BadChar%
+	\else\ifcd@ShortVerb
+		\cd@ShortVerbError
+	\else
+		\cd@ShortVerbtrue
+		\cd@DefErr{#1}{ShortVerb}
+		\chardef\cd@ShortVerbCat\catcode`#1%
+		\bgroup%
+			\lccode`\~=`#1%
+			\lowercase{%
+				\gdef~{\leavevmode\bgroup\ttfamily\cd@Verbatim\catcode`#1\active\cd@ShortVerb}%
+				\gdef\cd@ShortVerb##1~{##1\egroup}%
+				\gdef\UndoShortVerb{%
+					\ifcd@ShortVerb%
+						\cd@ShortVerbfalse%
+						\catcode`~\cd@ShortVerbCat%
+					\else%
+						\cd@UndoErr{\ShortVerb}%
+					\fi}}%
+		\egroup%
+		\catcode`#1=13
+	\fi\fi}%
+\def\UndoShortVerb{\cd@UndoErr{\ShortVerb}}
+
+\newif\ifcd@ShortCode
+\newif\ifcd@ShortCodeChar
+
+\def\ShortCode{%
+	\@ifnextchar[
+		{\cd@MakeShortCode}
+		{\cd@MakeShortCode[code]}}
+\bgroup
+\catcode`\^^M13%
+\gdef\cd@MakeShortCode[#1]#2{%
+	\def\cd@TempEnv{#1}%
+	\cd@BadChar{#2}{ShortCode}%
+	\ifcd@BadChar%
+	\else\ifcd@ShortCodeChar%
+		\cd@ShortCodeError%
+	\else%
+		\expandafter\ifx\csname #1@cd@EOL\endcsname\relax%
+			\cd@Error{%
+				`#1' is not an example environment.\MessageBreak%
+				`code' is selected instead}%
+			\def\cd@TempEnv{code}%
+		\fi%
+		\cd@ShortCodeChartrue%
+		\cd@DefErr{#2}{ShortCode}%
+		\chardef\cd@ShortCodeCat=\catcode`#2%
+		\bgroup%
+			\lccode`\~=`#2%
+			\lowercase{%
+			\gdef~{\cd@ShortCodetrue\csname\cd@TempEnv\endcsname}%
+			\gdef\cd@ShortEnd{~}%
+			\gdef\cd@ShortCode##1^^M##2~{\cd@StartGobble##2^^?\egroup}%
+			\gdef\cd@ActivateShortCode{\catcode`#2=13\relax}%
+			\gdef\UndoShortCode{%
+				\ifcd@ShortCodeChar%
+					\catcode`~=\cd@ShortCodeCat\relax%
+					\let\cd@ActivateShortCode\relax%
+					\cd@ShortCodeCharfalse%
+				\else%
+					\cd@UndoErr{\ShortCode}%
+				\fi}}%
+		\egroup%
+		\catcode`#2=13 %
+	\fi\fi}%
+\egroup
+\def\UndoShortCode{\cd@UndoErr{\ShortCode}}
+
+\newif\ifcd@VerbBreak
+\newtoks\cd@@Everypar
+
+\def\VerbBreak#1{%
+	\cd@BadChar{#1}{VerbBreak}%
+	\ifcd@BadChar%
+	\else\ifcd@VerbBreak%
+		\cd@VerbBreakError%
+	\else\cd@VerbBreaktrue
+		\cd@DefErr{#1}{VerbBreak}%
+		\bgroup%
+			\lccode`\~`#1 %
+			\lowercase{%
+			\gdef\cd@ActivateVerbBreak{%
+				\catcode`#1\active%
+				\gdef~{%
+					\cd@@Everypar\everypar%
+					\everypar{}%
+					\dimen0=\cd@FirstSpaces\fontdimen2\font\relax%
+					\expandafter\ifx\csname\cd@ExampleName @cd@boxwidth\endcsname\relax%
+					\else%
+						\advance\dimen0 \csname\cd@ExampleName @cd@boxwidth\endcsname\relax%
+					\fi%
+					\endgraf\leavevmode\everypar\cd@@Everypar\hbox to\dimen0{\hss}}}}%
+		\egroup%
+		\def\cd@IgnoreVerbBreak{\catcode`#1=9\relax}%
+	\fi\fi}
+\def\UndoVerbBreak{%
+	\ifcd@VerbBreak%
+		\let\cd@ActivateVerbBreak\relax
+		\let\cd@IgnoreVerbBreak\relax
+		\cd@VerbBreakfalse
+	\else
+		\cd@UndoErr{\VerbBreak}
+	\fi}
+\let\cd@ActivateVerbBreak\relax
+\newif\ifcd@VerbCommand
+
+\def\VerbCommand#1#2#3{%
+	\cd@BadChar{#1}{VerbCommand}%
+	\cd@BadChar{#2}{VerbCommand}%
+	\cd@BadChar{#3}{VerbCommand}%
+	\ifcd@BadChar%
+	\else\ifcd@VerbCommand%
+		\cd@VerbCommandError
+	\else%
+		\cd@DefErr{#1, \string#2 and \string#3}{VerbCommand}
+		\cd@VerbCommandtrue%
+		\def\cd@ActivateVerbCommand{\catcode`#1=0 \catcode`#2=1 \catcode`#3=2\relax}%
+		\def\cd@IgnoreVerbCommand{%
+			\catcode`#1=13 %
+			\lccode`\~=`#1 %
+			\lowercase{\def~{\cd@GobbleLetters}}%
+			\catcode`#2=13 %
+			\lccode`\~=`#2 %
+			\lowercase{\def~####1#3{}}}%
+	\fi\fi}
+\def\UndoVerbCommand{%
+	\ifcd@VerbCommand%
+		\let\cd@ActivateVerbCommand\relax%
+		\let\cd@IgnoreVerbCommand\relax%
+		\cd@VerbCommandfalse%
+	\else%
+		\cd@UndoErr{\VerbCommand}%
+	\fi}%
+\let\cd@IgnoreVerbCommand\relax
+\let\cd@ActivateVerbCommand\relax
+\def\cd@GobbleLetters#1{\ifnum\catcode`#1=11 \expandafter\cd@GobbleLetters\else\expandafter#1\fi}
+\newif\ifcd@CodeEscape%
+
+\def\CodeEscape#1{%
+	\cd@BadChar{#1}{CodeEscape}%
+	\ifcd@BadChar%
+	\else\ifcd@CodeEscape%
+		\cd@CodeEscapeError%
+	\else%
+		\cd@CodeEscapetrue%
+		\cd@DefErr{#1}{CodeEscape}%
+	\fi\fi}
+\def\UndoCodeEscape{%
+	\ifcd@CodeEscape%
+		\cd@CodeEscapefalse%
+	\else%
+		\cd@UndoErr{\CodeEscape}%
+	\fi}%
+
+\newif\ifcd@Star
+\newif\ifcd@NewLine
+\newcount\cd@FirstSpaces
+
+\bgroup
+\catcode`\ 12%
+\gdef\cd@SpaceChar{\texttt{ }}%
+
+\catcode`\^^I=13\relax%
+\catcode`\ =13\relax%
+\gdef\cd@MakeSpace{%
+\ifcd@Star%
+\let\cd@ObeySpaces\cd@SpaceChar%
+\else%
+\let\cd@ObeySpaces\@xobeysp%
+\fi%
+\catcode`\ =13\relax%
+\catcode`\^^I=13\relax%
+\let =\cd@VerbSpace%
+\let^^I=\cd@VerbTab}%
+\gdef\cd@VerbSpace#1{%
+\cd@ObeySpaces%
+\ifcd@NewLine\advance\cd@FirstSpaces1\relax\fi%
+\ifx#1^^I\else\ifx#1 \else\cd@NewLinefalse\fi\fi#1}%
+\gdef\cd@VerbTab#1{%
+\leavevmode\hbox%
+to\cd@TabSize\fontdimen2\font{\hss}%
+\ifcd@NewLine\advance\cd@FirstSpaces\cd@TabSize\fi%
+\ifx#1^^I\else\ifx#1 \else\cd@NewLinefalse\fi\fi#1}
+\egroup
+
+\def\cd@Verbatim{%
+	\parindent\z@%
+	\hfuzz=\cd@BoxTolerance%
+	\ifcd@ShortVerb%
+		\UndoShortVerb%
+	\fi%
+	\ifcd@ShortCode%
+		\else%
+		\ifcd@ShortCodeChar%
+			\UndoShortCode%
+		\fi%
+	\fi%
+	\let\do\@makeother\dospecials\@noligs%
+	\ifcd@ShortCode%
+		\cd@ActivateShortCode%
+	\fi%
+	\cd@ActivateVerbBreak%
+	\cd@ActivateVerbCommand%
+	\frenchspacing%
+	\catcode`\^^M=13\relax%
+	\cd@MakeSpace}%
+
+\newdimen\cd@BoxTolerance
+\def\BoxTolerance#1{\cd@BoxTolerance=#1\relax}
+\def\TabSize#1{\chardef\cd@TabSize=#1\relax}
+\TabSize2
+\def\Gobble#1{\chardef\cd@GobbleNum=#1\relax}
+\Gobble0
+
+\def\CodeFont#1{\def\cd@CodeFont{#1}}
+\CodeFont{\ttfamily}
+\newcount\code@cd@LineNumber
+\def\code@cd@boxwidth{0pt}
+\def\code@cd@BoxStyle{\rmfamily\footnotesize}
+\gdef\code@cd@LineNumberBox{%
+	\global\advance\code@cd@LineNumber1\relax%
+	\def\@currentlabel{\code@cd@LineNumber}%
+	\hbox to\code@cd@boxwidth{%
+	\hss%
+	\code@cd@BoxStyle\relax%
+	\the\code@cd@LineNumber\enspace}}%
+\let\code@cd@EOL\iffalse%
+\def\code{%
+	\endgraf%
+  \bgroup%
+  	\def\cd@ExampleName{code}%
+    \cd@Verbatim%
+    \cd@ObeyLines%
+    \everypar{%
+    	\code@cd@LineNumberBox
+      \cd@NewLinetrue%
+      \cd@FirstSpaces0\relax}%
+    \cd@CodeFont%
+    \ifcd@ShortCode%
+    	\global\cd@ShortCodefalse%
+    	\let\cd@next\cd@ShortCode%
+    \else\ifcd@Star%
+    	\global\cd@Starfalse%
+    	\let\cd@next\cd@StarCode%
+    \else%
+    	\let\cd@next\cd@Code%
+    \fi\fi\cd@next}
+\expandafter\def\csname code*\endcsname{\cd@Startrue\code}
+\def\invisible{%
+	\bgroup%
+	\catcode`\\=12 \catcode`\{=12 \catcode`\}=12 \catcode`\^^M=13 %
+	\cd@Invisible}
+\gdef^^?{\cd@UnlikelyCommand}
+\gdef\cd@UnlikelyCommand{}
+
+\begingroup
+\catcode`|=0
+\catcode`<=1
+\catcode`>=2
+\catcode`{=12
+\catcode`}=12
+\catcode`\^^M=13 %
+\catcode`\\=12 %
+|gdef|cd@Code#1^^M#2\end{code}<|cd@StartGobble#2^^?|egroup|end<code>>%
+|gdef|cd@StarCode#1^^M#2\end{code*}<|cd@StartGobble#2^^?|egroup|end<code*>>%
+|gdef|cd@Invisible#1^^M#2\end{invisible}<|egroup|end<invisible>|ignorespaces>%
+|endgroup
+\newcount\cd@GobbleCount%
+\begingroup
+\catcode`\^^M13\relax%
+\gdef\cd@StartGobble#1{%
+	\ifx#1^^?%
+		\cd@GobbleCount=0 %
+		\let\cd@next\relax%
+	\else\ifnum\cd@GobbleCount=\cd@GobbleNum%
+		\cd@GobbleCount=0 %
+		\def\cd@next{#1}%
+	\else\ifx#1^^M%
+		\cd@GobbleCount=0 %
+		\def\cd@next{^^M}%
+	\else%
+		\advance\cd@GobbleCount1 %
+		\let\cd@next\cd@StartGobble%
+	\fi\fi\fi\cd@next}%
+\gdef\cd@ObeyLines{%
+	\def^^M##1{%
+		\ifx##1^^?%
+		\cd@GobbleCount=0 %
+		\def\cd@next{\leavevmode\endgraf}%
+	\else\ifnum\cd@GobbleCount=\cd@GobbleNum%
+		\cd@GobbleCount=0 %
+		\def\cd@next{\leavevmode\endgraf##1}%
+	\else\ifx##1^^M%
+		\cd@GobbleCount=0 %
+		\def\cd@next{\leavevmode\endgraf^^M}%
+	\else%
+		\advance\cd@GobbleCount1 %
+		\let\cd@next^^M%
+	\fi\fi\fi\cd@next}}%
+\endgroup
+
+\def\eTeXOn{%
+	\@ifundefined{eTeXversion}%
+		{\cd@Error{%
+		You're not running on eTeX.\MessageBreak%
+		Command \string\eTeXOn\space ignored}}%
+		{\cd@eTeXtrue}}
+\def\eTeXOff{\cd@eTeXfalse}
+\def\NewExample{%
+	\@ifnextchar[%
+		{\cd@NewExample}%
+		{\cd@NewExample[]}}
+\def\cd@NewExample[#1]#2{%
+	\expandafter\ifx\csname #2\endcsname\relax
+		\def\cd@next{\catcode`\#=13 \cd@@NewExample{#1}{#2}}%
+	\else%
+		\let\cd@next\relax%
+		\cd@Error{%
+		Style `#2' already defined or the name\MessageBreak%
+		is already in use.\MessageBreak%
+		Use \protect\RenewExample\space if you want to redefine it}%
+		\let\cd@next\cd@GobbleThree%
+	\fi\cd@next}
+
+\def\RenewExample{%
+	\@ifnextchar[%
+		{\cd@RenewExample}%
+		{\cd@RenewExample[]}}
+\def\cd@RenewExample[#1]#2{%
+	\expandafter\ifx\csname #2\endcsname\relax
+		\let\cd@next\relax%
+		\cd@Error{%
+		Style `#2' is undefined.\MessageBreak%
+		Use \protect\NewExample\space to redefine it}%
+		\let\cd@next\cd@GobbleThree%
+	\else\expandafter\ifx\csname #2\endcsname\code%
+		\def\CodeFont{%
+			\cd@Error{%
+			You have redefined the `code' environment.\MessageBreak%
+			\string\CodeFont\space is no longer operative}}
+	\fi%
+		\def\cd@next{\catcode`\#=13 \cd@@NewExample{#1}{#2}}%
+	\fi\cd@next}
+
+\def\cd@GobbleThree#1#2#3{}
+
+\begingroup
+\catcode`\"=6 %
+\catcode`\#=13 %
+\long\gdef\cd@@NewExample"1"2"3"4"5{%
+	\expandafter\gdef\csname"2@cd@EOL\endcsname{\iffalse}%
+	\expandafter\let\csname"2@cd@LineNumberBox\endcsname\relax%
+	\def\cd@ExampleName{"2}%
+	\cd@ExampleOptions"1,cd@end,%
+	\expandafter\def\csname"2\endcsname{%
+		\gdef\CodeInput{{%
+			\def\cd@ExampleName{"2}%
+			\let#\cd@Input%
+			"3}}%
+		\gdef\CodeOutput{%
+			\def\cd@ExampleName{"2}%
+			\let#\cd@Output{"4}}%
+		\gdef\cd@MakeExample{{"5}}%
+		\cd@Example{"2}}%
+	\expandafter\def\csname"2*\endcsname{%
+		\global\cd@Startrue%
+		\gdef\CodeInput{{%
+		\def\cd@ExampleName{"2}%
+		\cd@Startrue%
+		\let#\cd@Input%
+		"3}}%
+		\gdef\CodeOutput{%
+			\def\cd@ExampleName{"2}%
+			\let#\cd@Output{"4}}%
+		\gdef\cd@MakeExample{{"5}}%
+		\cd@Example{"2*}}%
+	\catcode`\#=6\relax}%
+\endgroup
+
+\def\cd@numbered{numbered}
+\def\cd@continuous{continuous}
+\def\cd@visibleEOL{visibleEOL}
+\def\cd@empty{}
+\def\cd@ExampleOptions#1,{%
+	\def\cd@TempOption{#1}%
+	\let\cd@next\cd@ExampleOptions%
+	\ifx\cd@TempOption\cd@end%
+		\let\cd@next\relax%
+	\else\ifx\cd@TempOption\cd@numbered%
+		\global\expandafter\newcount\csname\cd@ExampleName @cd@LineNumber\endcsname%
+		\expandafter\gdef\csname\cd@ExampleName @cd@boxwidth\endcsname{0pt}%
+		\expandafter\let\csname\cd@ExampleName @cd@BoxStyle\endcsname\relax%
+		\expandafter\gdef\csname\cd@ExampleName @cd@LineNumberBox\endcsname{%
+			\expandafter\advance\csname\cd@ExampleName @cd@LineNumber\endcsname1\relax%
+			\def\@currentlabel{\expandafter\the\csname\cd@ExampleName @cd@LineNumber\endcsname}%
+			\hbox to\csname\cd@ExampleName @cd@boxwidth\endcsname{%
+				\hss%
+				\csname\cd@ExampleName @cd@BoxStyle\endcsname\relax%
+				\expandafter\the\csname\cd@ExampleName @cd@LineNumber\endcsname\enspace}}%
+	\else\ifx\cd@TempOption\cd@continuous%
+		\expandafter\ifx\csname\cd@ExampleName @cd@LineNumber\endcsname\relax%
+			\global\expandafter\newcount\csname\cd@ExampleName @cd@LineNumber\endcsname%
+		\fi%
+		\expandafter\gdef\csname\cd@ExampleName @cd@boxwidth\endcsname{0pt}%
+		\expandafter\let\csname\cd@ExampleName @cd@BoxStyle\endcsname\relax%
+		\expandafter\gdef\csname\cd@ExampleName @cd@LineNumberBox\endcsname{%
+			\global\expandafter\advance\csname\cd@ExampleName @cd@LineNumber\endcsname1\relax%
+			\def\@currentlabel{\expandafter\the\csname\cd@ExampleName @cd@LineNumber\endcsname}%
+			\hbox to\csname\cd@ExampleName @cd@boxwidth\endcsname{%
+				\hss%
+				\csname\cd@ExampleName @cd@BoxStyle\endcsname\relax%
+				\expandafter\the\csname\cd@ExampleName @cd@LineNumber\endcsname\enspace}}%
+	\else\ifx\cd@TempOption\cd@visibleEOL%
+		\expandafter\gdef\csname\cd@ExampleName @cd@EOL\endcsname{\csname iftrue\endcsname}%
+	\else\ifx\cd@TempOption\cd@empty%
+	\else%
+		\cd@Error{`#1' is not a valid option}%
+	\fi\fi\fi\fi\fi\cd@next}%
+
+\def\LineNumber#1#2#3{%
+	\expandafter\ifx\csname#1@cd@EOL\endcsname\relax%
+		\cd@Error{`#1' is not an example environment'}%
+	\else\expandafter\ifx\csname #1@cd@LineNumber\endcsname\relax%
+		\cd@Warning{%
+			`#1' is not `numbered' nor `continuous'.\MessageBreak%
+			\string\LineNumber\space on line \the\inputlineno\space is useless}{}%
+	\else%
+		\expandafter\gdef\csname #1@cd@BoxStyle\endcsname{#2}%
+		\expandafter\gdef\csname #1@cd@boxwidth\endcsname{#3}%
+	\fi\fi%
+	\@ifnextchar[{\cd@SetLineNumber#1}\relax}
+\def\cd@SetLineNumber#1[#2]{%
+	\expandafter\ifx\csname#1@cd@LineNumber\endcsname\relax%
+	\else%
+		\csname#1@cd@LineNumber\endcsname=#2\relax%
+		\expandafter\advance\csname#1@cd@LineNumber\endcsname\m@ne%
+	\fi}
+
+\NewExample{example}{\ttfamily#}{#}{}
+\def\CodeInput{%
+	\cd@Error{%
+		No example environment has been created.\MessageBreak%
+		\string\CodeInput\space is void}}
+\def\CodeOutput{%
+	\cd@Error{%
+		No example environment has been created.\MessageBreak%
+		\string\CodeOutput\space is void}}
+
+\begingroup
+\catcode`|=0 %
+\catcode`<=1 %
+\catcode`>=2 %
+\catcode`{=12 %
+\catcode`}=12 %
+\catcode`\\=12 %
+|gdef|cd@Example#1<%
+	|bgroup%
+		|let|do|@makeother%
+		|dospecials%
+		|ifcd@ShortCode%
+			|global|let|cd@EndEnv|relax
+			|expandafter|cd@MakeExampleEnd|expandafter<|cd@ShortEnd>%
+			|global|cd@ShortCodefalse%
+			|cd@ActivateShortCode%
+		|else%
+			|gdef|cd@EndEnv<|end<#1>>%
+			|cd@MakeExampleEnd<\end{#1}>%
+			|ifcd@ShortCodeChar%
+				|UndoShortCode%
+			|fi%
+		|fi%
+		|ifcd@ShortVerb%
+			|UndoShortVerb%
+		|fi%
+		|catcode`|^^I=12 %
+		|catcode`|^^M=13 %
+		|ifcd@eTeX%
+			|catcode`|%=13 %
+		|fi%
+		|cd@ExampleEnd>%
+|endgroup
+\begingroup
+\catcode`\^^M=13 %
+%
+\gdef\cd@MakeExampleEnd#1{%
+	\ifcd@eTeX%
+		\gdef\cd@ExampleEnd##1^^M##2#1{%
+			\egroup%
+			\cd@EndEnv%
+			\bgroup%
+				\everypar{}%
+				\cd@AssigneTeXInput{##2}%
+			\global\cd@Starfalse}%
+	\else%
+		\def\cd@ExampleEnd##1^^M##2#1{%
+			\expandafter\ifx\csname cd@TestRead\endcsname\relax%
+				\newread\cd@TestRead%
+			\fi%
+			\openin\cd@TestRead=\jobname.exp %
+			\ifeof\cd@TestRead\relax%
+				\cd@Warning{%
+				You're not running on eTeX or you've said \string\eTeXOff.\MessageBreak%
+				I create the file \jobname.exp to produce\MessageBreak%
+				the example environment on line \the\inputlineno.\MessageBreak%
+				You can delete it whenever you want, but\MessageBreak%
+				keeping it prevents this message from reappearing.}%
+			\fi%
+			\closein\cd@TestRead %
+			\expandafter\ifx\csname cd@expFile\endcsname\relax%
+				\newwrite\cd@expFile%
+			\fi%
+				\immediate\openout\cd@expFile=\jobname.exp %
+			\let^^M\cd@noeTeXEOL%
+			^^M##2^^?^^M^^?%
+			\egroup%
+			\cd@EndEnv%
+			\immediate\closeout\cd@expFile%
+			\bgroup%
+				\everypar{}%
+				\cd@AssignInput%
+			\egroup\global\cd@Starfalse}%
+	\fi}%
+\endgroup
+\begingroup
+\catcode`\^^M\active%
+\gdef\cd@noeTeXEOL#1{%
+	\ifx#1^^?%
+		\cd@GobbleCount=0 %
+		\let^^M\relax%
+		\let\cd@next\relax%
+	\else\ifx#1^^M%
+		\cd@GobbleCount=0 %
+		\def\cd@next{\immediate\write\cd@expFile{}\cd@noeTeXEOL}%
+	\else\ifnum\cd@GobbleCount=\cd@GobbleNum%
+		\cd@GobbleCount=0 %
+		\def\cd@next{\cd@LineWrite#1}%
+	\else%
+		\advance\cd@GobbleCount1 %
+		\let\cd@next\cd@noeTeXEOL%
+	\fi\fi\fi\cd@next}%
+\gdef\cd@LineWrite#1^^M{\immediate\write\cd@expFile{#1}\cd@noeTeXEOL}%
+\newtoks\cd@Everypar
+%
+\gdef\cd@AssignInput{%
+	\gdef\cd@Input{%
+		\bgroup%
+			\cd@Everypar\everypar%
+			\everypar{%
+				\leavevmode\csname\cd@ExampleName @cd@LineNumberBox\endcsname\relax%
+				\cd@NewLinetrue\cd@FirstSpaces0\relax\the\cd@Everypar\relax}%
+			\cd@Verbatim%
+			\def^^M{\leavevmode\endgraf}%
+			\input{\jobname.exp}%
+		\egroup}%
+	\gdef\cd@Output{%
+		\bgroup%
+			\cd@IgnoreVerbBreak%
+			\cd@IgnoreVerbCommand%
+			\input{\jobname.exp}%
+		\egroup}%
+		\cd@MakeExample}%
+%
+\long\gdef\cd@AssigneTeXInput#1{%
+	\gdef\cd@Input{%
+		\bgroup%
+			\cd@Everypar\everypar%
+			\everypar{%
+			\leavevmode\csname\cd@ExampleName @cd@LineNumberBox\endcsname\relax%
+			\cd@NewLinetrue\cd@FirstSpaces0\relax\the\cd@Everypar\relax}%
+			\cd@Verbatim%
+			\catcode`\^^M=13 %
+			\let^^M\cd@eTeXStartGobble%
+			\catcode`\^^?13 %
+			\def^^?{\catcode`\^^M=9\relax}%
+			\scantokens{^^M#1^^?}%
+		\egroup}%
+	\gdef\cd@Output{%
+		\bgroup%
+			\cd@IgnoreVerbBreak%
+			\catcode`\^^?13 %
+			\catcode`\%=13 %
+			\catcode`\^^M=13 %
+			\csname\cd@ExampleName @cd@EOL\endcsname%
+				\cd@VisibleComment%
+				\let^^M\cd@eTeXOutVisibleEOL%
+				\def^^?{\let^^M\relax}%
+				\cd@IgnoreVerbCommand%
+				\scantokens{#1^^?}%
+			\else%
+				\cd@ActiveComment%
+				\let^^M\cd@eTeXOutEOL%
+				\def^^?{\catcode`\^^M9\relax}%
+				\xdef\cd@exinput{#1^^?}%
+				\cd@IgnoreVerbCommand%
+				\catcode`\^^M=9 %
+				\catcode`\^^@=9 %
+				\expandafter\scantokens\expandafter{\cd@exinput}%
+			\fi%
+		\egroup}%
+	\cd@MakeExample\egroup}%
+%
+\gdef\cd@eTeXStartGobble#1{%
+	\ifx#1^^?%
+		\cd@GobbleCount=0 %
+		\let\cd@next\relax%
+	\else\ifnum\cd@GobbleCount=\cd@GobbleNum%
+		\cd@GobbleCount=0 %
+		\let^^M\cd@eTeXEOL%
+		\def\cd@next{#1}%
+	\else\ifx#1^^M%
+		\cd@GobbleCount=0 %
+		\let^^M\cd@eTeXEOL%
+		\let\cd@next^^M%
+	\else%
+		\advance\cd@GobbleCount1 %
+		\let\cd@next\cd@eTeXStartGobble%
+	\fi\fi\fi\cd@next}%
+%
+\gdef\cd@eTeXEOL#1{%
+	\ifx#1^^?%
+		\cd@GobbleCount=0 %
+		\def\cd@next{\let^^M\relax\leavevmode\endgraf}%
+	\else\ifx#1^^M%
+		\cd@GobbleCount=0 %
+		\def\cd@next{\leavevmode\endgraf^^M}%
+	\else\ifnum\cd@GobbleCount=\cd@GobbleNum%
+		\cd@GobbleCount=0 %
+		\def\cd@next{\leavevmode\endgraf#1}%
+	\else%
+		\advance\cd@GobbleCount1 %
+		\let\cd@next^^M%
+	\fi\fi\fi\cd@next}%
+%
+\gdef\cd@eTeXOutVisibleEOL#1{%
+	\ifx#1^^?%
+		\let^^M\relax%
+		\let\cd@next\relax%
+	\else\ifx#1^^M%
+		\par%
+		\let\cd@next^^M%
+	\else%
+		\def\cd@next{ #1}%
+	\fi\fi\cd@next}%
+\catcode`\^^@=12\relax%
+\gdef\cd@eTeXOutEOL#1{%
+	\ifx#1^^?%
+	\else\ifx#1^^M%
+		\par%
+		\expandafter^^M%
+	\else%
+	^^@ \expandafter\expandafter\expandafter#1%
+	\fi\fi}%
+\catcode`\/=14\relax%
+\catcode`\%=13\relax/
+\catcode`\ =12\relax/
+\catcode`\^^I=12\relax/
+\gdef\cd@VisibleComment{/
+\def%##1^^M{\cd@EatBOL}/
+\def\cd@EatBOL##1{/
+\let\cd@next\cd@EatBOL/
+\ifx##1 /
+\else\ifx##1^^I/
+\else\ifx##1^^M/
+\let\cd@next\par/
+\else/
+\def\cd@next{##1}/
+\fi\fi\fi\cd@next}}/
+\gdef\cd@ActiveComment{/
+\def%##1^^M{\cd@EatBOL}/
+\def\cd@EatBOL##1{/
+\ifx##1 /
+\expandafter\cd@EatBOL/
+\else\ifx##1^^I/
+\expandafter\expandafter\expandafter\cd@EatBOL/
+\else\ifx##1^^M/
+\par/
+\else/
+\expandafter\expandafter\expandafter\expandafter\expandafter\expandafter\expandafter##1/
+\fi\fi\fi}}/
+\endgroup
+\def\CloseFile#1{%
+	\def\FileSource{%
+		\cd@Error{%
+			No file in production. \string\FileSource\space is empty}}%
+	\def\FileName{%
+		\cd@Error{%
+			No file in production. \string\FileName\space is empty}}%
+	\def\FileVersion{%
+		\cd@Error{%
+			No file in production. \string\FileVersion\space is empty}}%
+	\def\FileDate{%
+		\cd@Error{%
+			No file in production. \string\FileDate\space is empty}}}
+\ifcd@produce%
+	\def\FileName{}
+	\def\FileVersion{}
+	\def\FileDate{}
+\else
+	\CloseFile{}
+	\def\FileSource{}
+	\newcount\@cd@LineCount%
+\fi
+\def\ProduceFile#1{%
+	\ifcd@autoclose%
+		\code@cd@LineNumber0\relax%
+	\else%
+		\expandafter\csname\FileSource @cd@LineCount\endcsname=\code@cd@LineNumber%
+		\expandafter\ifx\csname #1@cd@LineCount\endcsname\relax%
+			\expandafter\newcount\csname #1@cd@LineCount\endcsname%
+			\code@cd@LineNumber0\relax%
+		\else%
+			\expandafter\code@cd@LineNumber\csname #1@cd@LineCount\endcsname%
+		\fi%
+	\fi%
+	\def\FileName{%
+		\cd@Error{%
+			No \string\FileName\space has been given to \FileSource}}%
+	\def\FileVersion{%
+	\cd@Error{%
+		No \string\FileVersion\space has been given to \FileSource}}%
+	\def\FileDate{%
+	\cd@Error{%
+		No \string\FileDate\space has been given to \FileSource}}%
+	\edef\FileSource{#1}%
+	\@ifnextchar[%
+	{\cd@GetFileName}%
+	\relax}
+\def\cd@GetFileName[#1]{%
+	\edef\FileName{#1}%
+	\@ifnextchar[\cd@GetFileVersion\relax}
+\def\cd@GetFileVersion[#1]{%
+	\edef\FileVersion{#1}%
+	\@ifnextchar[\cd@GetFileDate\relax}
+\def\cd@GetFileDate[#1]{%
+	\edef\FileDate{#1}}
+
+\def\Header{\bgroup\catcode`\%=12 \cd@HeaderGobble}
+\long\def\cd@HeaderGobble#1{\egroup}
+\let\AddBlankLine\relax
+\let\StartIgnore\relax
+\let\StopIgnore\relax
+\def\DangerousEnvironment#1{}
+
+%
+% Definitions for the produce mode
+%
+\ifcase\cd@tracingmode
+	\def\cd@Tracing#1{}
+	\def\cd@TChar#1#2{}
+	\def\cd@TUChar#1{}
+	\let\cd@TCode\relax
+\or
+	\def\cd@Tracing#1{}
+	\def\cd@TChar#1#2{}
+	\def\cd@TUChar#1{}
+	\def\cd@TCode{\immediate\write17{%
+		*** Code written from line \the\cd@ProduceLine\space to \the\inputlineno\space to \cd@CurrentFile. ***}}
+\or
+	\def\cd@Tracing#1{\immediate\write17{On line \the\cd@ProduceLine: #1.}}
+	\def\cd@TChar#1#2{
+		\bgroup
+			\escapechar\m@ne\cd@Tracing{`\string#1' defined as \string\\#2}
+		\egroup}
+	\def\cd@TUChar#1{
+		\bgroup
+			\escapechar\m@ne\cd@Tracing{\string\\#1 undone}
+		\egroup}
+	\def\cd@TCode{\immediate\write17{%
+		*** Code written from line \the\cd@ProduceLine\space to \the\inputlineno\space to \cd@CurrentFile. ***}}
+\fi
+\def\cd@CDError#1{%
+	\immediate\write17{%
+		^^J! CodeDoc Error:^^J#1^^Jl.\the\cd@ProduceLine^^J }}
+\def\cd@CDWarning#1{%
+	\immediate\write17{%
+		^^J? CodeDoc Warning: ^^J#1^^Jl.\the\cd@ProduceLine^^J }}
+\def\cd@NoFileWarning{\cd@CDWarning{No file in production. This code will be lost.}}
+
+\ifcd@produce
+\def\@documentclasshook{
+	\let\do\@makeother
+	\dospecials
+	\catcode`\^^I=12\relax
+	\catcode`\%=14\relax
+	\catcode`\\\active
+	\let\normalsize\relax
+	\ifnum\cd@tracingmode>0
+		\immediate\write17{^^J*** CODEDOC REPORT ***^^J}
+	\fi
+	\hfuzz=100cm%
+	\output={\deadcycles0\setbox0\box255}
+	\everypar{}
+	\tracingcommands\z@\tracingmacros\z@\tracingoutput\z@\tracingparagraphs\z@
+	\tracingpages\z@\tracinglostchars\z@\tracingrestores\z@\tracingstats\z@}
+\fi
+
+\begingroup
+\catcode`\{=12 %
+\catcode`\}=12 %
+\catcode`\<=1 %
+\catcode`\>=2 %
+\gdef\cd@LeftBrace<{>
+\gdef\cd@RightBrace<}>
+\gdef\cd@LeftBracket<[>
+\catcode`\ =12\relax
+\catcode`\^^I=12\relax
+\gdef\cd@Space< >
+\gdef\cd@Tab<^^I>
+\catcode`\^^M=12\relax%
+\gdef\cd@EndOfLine<^^M>%
+\catcode`\/=14\relax/
+\catcode`\%=12\relax/
+\gdef\cd@Comment<%>/
+\endgroup
+
+\newcount\cd@ProduceLine
+
+\begingroup
+\catcode`|=0 %
+\catcode`\\=13 %
+|gdef|cd@Escape{\}%
+|gdef\#1{%
+	|cd@ProduceLine|inputlineno%
+	|bgroup
+		|catcode`|^^M=12 %
+		|catcode`|%=12 %
+		|gdef|cd@MacroName{}%
+		|ifnum|catcode`#1=11 %
+			|def|cd@next{|cd@Gather#1}%
+		|else
+			|def|cd@next{|egroup|relax}
+		|fi
+		|cd@next}
+|long|gdef|cd@Gather#1{%
+	|ifnum|catcode`#1=11 %
+		|xdef|cd@MacroName{|cd@MacroName#1}%
+		|let|cd@next|cd@Gather%
+	|else%
+		|gdef|cd@NextChar{#1}%
+		|let|cd@next|cd@GobbleSpace%
+		|fi|cd@next}
+|endgroup
+
+\long\def\cd@GobbleSpace{%
+	\let\cd@next\cd@TakeNextChar
+	\ifx\cd@NextChar\cd@Space
+	\else\ifx\cd@NextChar\cd@Tab
+	\else\ifx\cd@NextChar\cd@EndOfLine
+	\else\ifx\cd@NextChar\cd@Comment
+		\let\cd@next\cd@GobbleEndOfLine
+	\else
+		\egroup
+		\def\cd@next{\expandafter\cd@Evaluate\cd@NextChar}
+	\fi\fi\fi\fi\cd@next}
+\long\def\cd@TakeNextChar#1{\gdef\cd@NextChar{#1}\cd@GobbleSpace}
+\begingroup
+\catcode`\^^M=12%
+\gdef\cd@GobbleEndOfLine#1^^M#2{%
+	\gdef\cd@NextChar{#2}%
+	\cd@GobbleSpace}%
+\endgroup
+\def\cd@Evaluate{\csname\cd@MacroName @Produce\endcsname}
+\def\cd@Gobble#1{}
+\def\cd@PrepareChar#1{%
+	\catcode`\\=0 %
+	\def\cd@next{\expandafter#1\cd@Gobble}
+	\ifx\cd@NextChar\cd@LeftBrace%
+	\else\ifx\cd@NextChar\cd@Escape%
+	\else%
+		\def\cd@next{#1}
+	\fi\fi}%
+
+\def\ShortVerb@Produce{\cd@PrepareChar\cd@MakeShortVerb@Produce\cd@next}
+\let\DefineShortVerb@Produce\ShortVerb@Produce
+\def\cd@VerbList{}
+\def\cd@MakeShortVerb@Produce#1{%
+	\cd@TChar{#1}{ShortVerb}
+	\expandafter\def\expandafter\cd@VerbList\expandafter{\cd@VerbList#1,}
+	\lccode`\~=`#1 %
+	\lowercase{%
+		\def~{\bgroup\let\do\@makeother\dospecials\catcode`#1\active\cd@ShortVerb@Produce}%
+		\def\cd@ShortVerb@Produce##1~{\egroup}}%
+	\def\UndoShortVerb@Produce{\cd@TUChar{ShortVerb}\catcode`#1=12\relax}%
+	\catcode`#1=13 %
+	\catcode`\\=13\relax}
+\let\UndoShortVerb@Produce\relax
+\def\UndefineShortVerb@Produce{\cd@PrepareChar\cd@UndefineShortVerb@Produce\cd@next}%
+\def\cd@UndefineShortVerb@Produce#1{
+	\cd@TUChar{ShortVerb (from fancyvrb)}
+	\catcode`#1=12 \catcode`\\=13\relax}
+
+\def\VerbBreak@Produce{\cd@PrepareChar\cd@MakeVerbBreak@Produce\cd@next}
+\def\cd@MakeVerbBreak@Produce#1{
+	\cd@TChar{#1}{VerbBreak}
+	\def\cd@IgnoreVerbBreak{\catcode`#1=9\relax}
+	\def\UndoVerbBreak@Produce{\cd@TUChar{VerbBreak}\let\cd@IgnoreVerbBreak\relax}
+	\catcode`\\=13\relax}
+\let\cd@IgnoreVerbBreak\relax
+\let\UndoVerbBreak@Produce\relax
+\def\cd@GobbleOptions#1[#2]#3{\def\cd@NextChar{#3}\expandafter#1\cd@NextChar}
+
+\def\ShortCode@Produce{%
+	\ifx\cd@NextChar\cd@LeftBracket%
+		\def\cd@next{\cd@GobbleOptions\ShortCode@Produce}%
+	\else%
+	\cd@PrepareChar\cd@MakeShortCode@Produce
+	\fi\cd@next}
+\begingroup
+\catcode`\^^M13%
+\gdef\cd@MakeShortCode@Produce#1{%
+	\cd@TChar{#1}{ShortCode}
+	\lccode`\~=`#1%
+	\lowercase{%
+	\def~{\cd@ProduceLine\inputlineno\cd@ShortCodetrue\cd@CodeWrite}%
+	\def\ActivateShortCode@Produce{\catcode`#1\active}%
+	\def\cd@ShortWriteFile##1^^M##2~{%
+		^^M##2^^?^^M^^?%
+		\ifx\cd@NoFileWarning\relax%
+			\cd@TCode%
+		\else%
+			\cd@NoFileWarning%
+		\fi\egroup}}%
+	\def\UndoShortCode@Produce{\cd@TUChar{ShortCode}\catcode`#1=12\relax}%
+	\catcode`\\=13 %
+	\catcode`#1=13\relax}%
+\endgroup
+\let\ActivateShortCode@Produce\relax
+\let\UndoShortCode@Produce\relax
+
+\def\VerbCommand@Produce{\cd@PrepareChar\cd@VerbEscape@Produce\cd@next}
+\def\cd@VerbEscape@Produce#1{
+	\bgroup\escapechar\m@ne\xdef\cd@TempEsc{\string#1}\egroup
+	\def\cd@IgnoreEscape@Produce{
+		\catcode`#1=13
+		\lccode`\~=`#1
+		\lowercase{\def~{\cd@GobbleLetters}}}
+		\ifx\cd@NextChar\cd@LeftBrace
+			\def\cd@next{\expandafter\cd@VerbBraces@Produce\cd@Gobble}
+		\else
+			\let\cd@next\cd@VerbBraces@Produce
+		\fi\cd@next}
+\def\cd@VerbBraces@Produce{\catcode`\{=1 \catcode`\}=2 \cd@@VerbBraces@Produce}
+\def\cd@@VerbBraces@Produce#1#2{%
+	\expandafter\cd@TChar\expandafter{\cd@TempEsc', `\string#1' and `\string#2'}{VerbCommand}
+	\def\cd@IgnoreBraces@Produce{%
+		\catcode`#1=13
+		\lccode`\~=`#1
+		\lowercase{\def~####1#2{}}}
+	\catcode`\\=13 \catcode`\{=12 \catcode`\}=12\relax}
+\def\UndoVerbCommand@Produce{
+	\cd@TUChar{VerbCommand}
+	\let\cd@IgnoreEscape@Produce\relax
+	\let\cd@IgnoreBraces@Produce\relax}
+\let\cd@IgnoreEscape@Produce\relax
+\let\cd@IgnoreBraces@Produce\relax
+
+\def\CodeEscape@Produce{\cd@PrepareChar\cd@CodeEscape@Produce\cd@next}
+\def\cd@CodeEscape@Produce#1{%
+	\cd@TChar{#1}{CodeEscape}
+	\def\cd@ActivateCodeEscape{\catcode`#1=0\relax}\catcode`\\=13\relax}
+\let\cd@ActivateCodeEscape\relax
+\def\UndoCodeEscape@Produce{\cd@TUChar{CodeEscape}\let\cd@ActivateCodeEscape\relax}
+
+\def\NewExample@Produce{%
+	\ifx\cd@NextChar\cd@LeftBracket%
+		\def\cd@next{\cd@GobbleOptions\NewExample@Produce}%
+	\else%
+		\let\cd@next\cd@DangerousExample@Produce%
+	\fi\cd@next}
+\let\RenewExample@Produce\NewExample@Produce
+
+\let\cd@@Evaluate\cd@Evaluate
+\def\StartIgnore@Produce{
+	\cd@Tracing{\string\StartIgnore\space found. I will ignore everything from now on}
+	\let\cd@Evaluate\cd@FindIgnore}
+\def\cd@FindIgnore{
+	\expandafter\ifx\csname cd@\cd@MacroName\endcsname\cd@StopIgnore
+		\cd@Tracing{\string\StopIgnore\space found. I resume my normal behavior}
+		\let\cd@Evaluate\cd@@Evaluate
+	\fi}
+\def\cd@StopIgnore{\cd@StopIgnore}
+
+\def\verb@Produce{\count@=0 \cd@VerbEater}
+\def\cd@VerbEater#1{%
+	\ifcase\count@ %
+		\ifx#1*
+			\count@=1 %
+			\let\cd@@VerbEater\cd@VerbEater
+		\else
+			\def\cd@@VerbEater##1#1{}
+		\fi
+	\else
+		\def\cd@@VerbEater##1#1{}
+	\fi\cd@@VerbEater}
+
+\def\DescribeMacro@Produce#1#2{}
+\def\DefineMacro@Produce#1#2{}
+\def\DescribeEnvironment@Produce#1#2{}
+\def\DefineEnvironment@Produce#1#2{}
+\def\noexpand@Produce#1{}
+\def\string@Produce#1{}
+\def\protect@Produce#1{}
+\def\begin@Produce{
+	\ifx\cd@NextChar\cd@LeftBrace
+		\expandafter\begin@@Produce
+	\fi}
+\def\end@Produce{
+	\ifx\cd@NextChar\cd@LeftBrace
+		\expandafter\end@@Produce
+	\fi}
+
+\def\Gobble@Produce#1{%
+	\ifx\cd@NextChar\cd@LeftBrace%
+		\def\cd@next{\expandafter\Gobble@@Produce\cd@NextChar}
+	\else
+		\def\cd@next{\chardef\cd@GobbleNum=#1\relax}%
+	\fi\cd@next}
+\newif\ifcd@HeaderFirstLine
+\begingroup
+\catcode`\^^M=13 %
+\catcode`\/=14 %
+\catcode`\%=12 /
+\gdef\Header@Produce{/
+	\bgroup/
+	\catcode`\^^M=13 /
+	\catcode`\%=12 /
+	\catcode`\\=0 /
+	\Header@@Produce}/
+\gdef\cd@HeaderEOL{\def^^M{^^J% }}
+\endgroup
+
+\def\cd@DocumentString{document}
+\def\cd@CodeString{code}
+\def\cd@StarCodeString{code*}
+\def\cd@InvisibleString{invisible}
+\def\cd@StoredEnvironments{example,verbatim,Verbatim,BVerbatim,LVerbatim,SaveVerbatim,VerbatimOut,Example,CenterExample,SideBySideExample,PCenterExample,PSideBySideExample,}
+
+\begingroup
+\catcode`\{=12 %
+\catcode`\}=12 %
+\catcode`\<=1 %
+\catcode`\>=2 %
+\long\gdef\Header@@Produce{#1}<
+	\gdef\cd@Header<\bgroup\cd@HeaderEOL\cd@ProduceFile<\cd@Comment\space#1>\egroup>
+	\egroup>
+
+\gdef\Gobble@@Produce{#1}<\chardef\cd@GobbleNum=#1\relax>
+
+\gdef\DangerousEnvironment@Produce{#1}<
+	\cd@Tracing<#1 added to dangerous environments>
+	\xdef\cd@StoredEnvironments<\cd@StoredEnvironments#1,>>
+\gdef\cd@DangerousExample@Produce{#1}#2{#3}#4{#5}#6{#7}<
+	\cd@Tracing<#1 added to dangerous environments (CodeDoc examples)>
+	\xdef\cd@StoredEnvironments<\cd@StoredEnvironments#1,>>
+\let\DefineVerbatimEnvironment@Produce\DangerousEnvironment@Produce
+
+\gdef\begin@@Produce{#1}<
+	\def\cd@TempArg<#1>
+	\ifx\cd@TempArg\cd@CodeString
+		\let\cd@next\cd@CodeWrite
+	\else\ifx\cd@TempArg\cd@StarCodeString
+		\cd@Startrue
+		\let\cd@next\cd@CodeWrite
+	\else\ifx\cd@TempArg\cd@InvisibleString
+		\cd@Invisibletrue
+		\let\cd@next\cd@CodeWrite
+	\else
+		\def\cd@next<\cd@CheckEnvironment<#1>>
+	\fi\fi\fi\cd@next>
+\gdef\end@@Produce{#1}<
+	\def\cd@TempArg<#1>
+	\ifx\cd@TempArg\cd@DocumentString
+		\def\cd@next<\cd@Tracing<\string\end{document}>
+		\ifnum\cd@tracingmode=0 %
+		\else
+			\immediate\write17<^^J*** END OF CODEDOC REPORT ***^^J>
+		\fi\@@end>
+	\else
+		\let\cd@next\relax
+	\fi\cd@next>
+\gdef\ProduceFile@Produce{#1}<\ProduceFile@@Produce<#1>>
+\gdef\CloseFile@Produce{#1}<\CloseFile@@Produce<#1>>
+
+\newcount\cd@InputDepth
+\gdef\input@Produce{#1}<
+	\cd@Tracing<\string\input\space file #1>
+	\expandafter\let\csname cd@MasterSource\the\cd@InputDepth\endcsname\cd@CurrentSource
+	\edef\cd@CurrentSource<#1 (\string\input\space in \cd@CurrentSource)>
+	\advance\cd@InputDepth1\relax
+	\@@input #1\relax
+	\advance\cd@InputDepth-1\relax
+	\expandafter\let\expandafter\cd@CurrentSource\csname cd@MasterSource\the\cd@InputDepth\endcsname>
+
+\catcode`\|=0 %
+\catcode`\\=13 %
+|gdef|cd@MakeSpecialEater#1<
+	|long|def|cd@SpecialEater##1\end{#1}<>
+	|cd@SpecialEater>
+|endgroup
+
+\edef\cd@CurrentSource{\jobname.tex}
+
+\def\cd@CheckEnvironment#1{
+	\def\cd@TempEnv{#1}
+	\expandafter\cd@@CheckEnvironment\cd@StoredEnvironments cd@end,}
+\def\cd@@CheckEnvironment#1,{
+	\def\cd@@TempEnv{#1}
+	\def\cd@@StarTempEnv{#1*}
+	\ifx\cd@@TempEnv\cd@end
+		\let\cd@next\relax
+	\else\ifx\cd@@TempEnv\cd@TempEnv
+		\def\cd@next{\cd@MakeSpecialEater{#1}}
+	\else\ifx\cd@@StarTempEnv\cd@TempEnv
+		\def\cd@next{\cd@MakeSpecialEater{#1*}}
+	\else
+		\let\cd@next\cd@@CheckEnvironment
+	\fi\fi\fi
+	\cd@next}
+\def\cd@MakeOther#1,{%
+	\def\cd@TempArg{#1}%
+	\ifx\cd@TempArg\cd@end%
+	\else%
+		\catcode`#1=12 %
+		\expandafter\cd@MakeOther%
+	\fi}
+
+\newif\ifcd@Invisible
+\begingroup
+\catcode`\^^M=13\relax%
+\gdef\cd@CodeWrite{%
+	\bgroup%
+		\let\do\@makeother%
+		\dospecials%
+		\catcode`\^^I=12 %
+		\expandafter\cd@MakeOther\cd@VerbList cd@end,%
+		\cd@IgnoreVerbBreak%
+		\ifcd@ShortCode%
+			\ActivateShortCode@Produce%
+		\else%
+			\let\cd@TempTUChar\cd@TUChar
+			\def\cd@TUChar##1{}
+			\UndoShortCode@Produce%
+			\let\cd@TUChar\cd@TempTUChar
+		\fi%
+		\cd@IgnoreEscape@Produce%
+		\cd@IgnoreBraces@Produce%
+		\cd@ActivateCodeEscape%
+		\catcode`\^^M=13\relax%
+		\let^^M\cd@produceEOL%
+		\ifcd@ShortCode%
+			\global\cd@ShortCodefalse\let\cd@next\cd@ShortWriteFile%
+		\else\ifcd@Star%
+			\global\cd@Starfalse\let\cd@next\cd@StarWriteFile%
+		\else\ifcd@Invisible%
+			\global\cd@Invisiblefalse\let\cd@next\cd@InvisibleWriteFile%
+		\else%
+			\let\cd@next\cd@WriteFile%
+		\fi\fi\fi\cd@next}%
+\gdef\cd@produceEOL#1{%
+	\ifx#1^^?%
+		\cd@GobbleCount=0 %
+		\let^^M\relax%
+		\let\cd@next\relax%
+	\else\ifx#1^^M%
+		\cd@GobbleCount=0 %
+		\def\cd@next{\cd@ProduceFile{}\cd@produceEOL}%
+	\else\ifnum\cd@GobbleCount=\cd@GobbleNum%
+		\cd@GobbleCount=0 %
+		\def\cd@next{\cd@LineWrite@Produce#1}%
+	\else%
+		\advance\cd@GobbleCount1 %
+		\let\cd@next\cd@produceEOL%
+	\fi\fi\fi\cd@next}%
+\gdef\cd@LineWrite@Produce#1^^M{\cd@ProduceFile{#1}\cd@produceEOL}%
+\catcode`|=0 %
+\catcode`<=1 %
+\catcode`>=2 %
+\catcode`{=12 %
+\catcode`}=12 %
+\catcode`\\=12 %
+|long|gdef|cd@WriteFile#1^^M#2\end{code}<%
+	^^M#2^^?^^M^^?%
+	|ifx|cd@NoFileWarning|relax%
+		|cd@TCode%
+	|else%
+		|cd@NoFileWarning%
+	|fi|egroup>%
+|long|gdef|cd@StarWriteFile#1^^M#2\end{code*}<%
+	^^M#2^^?^^M^^?%
+	|ifx|cd@NoFileWarning|relax%
+		|cd@TCode%
+	|else%
+		|cd@NoFileWarning%
+	|fi|egroup>%
+|long|gdef|cd@InvisibleWriteFile#1^^M#2\end{invisible}<%
+	^^M#2^^?^^M^^?%
+	|ifx|cd@NoFileWarning|relax%
+		|cd@TCode%
+	|else%
+		|cd@NoFileWarning%
+	|fi|egroup>%
+|endgroup
+
+\def\cd@Closed{closed}
+\def\cd@Open{open}
+\def\cd@Wait{wait}
+
+\newcount\cd@ProduceCount
+
+\def\cd@CurrentFile{}
+\chardef\@unused=17
+
+\def\cd@ProduceFile#1{}
+\def\AddBlankLine@Produce{\cd@ProduceFile{}}
+
+\def\ProduceFile@@Produce#1{%
+	\let\cd@next\relax
+	\expandafter\ifx\csname #1@Status\endcsname\cd@Closed
+		\cd@CDError{%
+		File `#1' has already been closed.^^J%
+		If I open it again, it will be erased.^^J%
+		I can't do that. I quit. Sorry.}
+		\let\cd@next\@@end
+	\else\expandafter\ifx\csname #1@Status\endcsname\cd@Open
+		\cd@CDWarning{%
+		File `#1' is currently in production.^^J%
+		Why do you try to open it again?}
+	\else\expandafter\ifx\csname #1@Status\endcsname\cd@Wait
+		\expandafter\let\csname #1@Status\endcsname\cd@Open
+		\let\cd@NoFileWarning\relax
+		\def\cd@ProduceFile{\immediate\write\csname #1@Stream\endcsname}
+		\expandafter\let\csname \cd@CurrentFile @Status\endcsname\cd@Wait
+		\def\cd@CurrentFile{#1}
+	\else\ifnum\cd@ProduceCount>15
+		\chardef\cd@ProduceStream=16
+		\expandafter\cd@FindStream\cd@StreamList cd@end,
+		\ifnum\cd@ProduceStream=16 %
+			\cd@CDError{%
+			No more stream for a new file. Close one with \string\CloseFile\space^^J%
+			(or use the `autoclose' option).^^J%
+			This situation makes me feel bad. I quit.}
+			\let\cd@next\@@end
+		\else
+			\cd@Tracing{I will now produce file #1}
+			\ifx\cd@CurrentFile\cd@empty
+			\else
+				\ifcd@autoclose
+					\cd@Tracing{I close file \cd@CurrentFile\space (autoclose mode)}
+					\expandafter\let\csname \cd@CurrentFile @Status\endcsname\cd@Closed
+				\else
+					\expandafter\let\csname \cd@CurrentFile @Status\endcsname\cd@Wait
+				\fi
+			\fi
+			\def\cd@CurrentFile{#1}
+			\expandafter\let\csname #1@Status\endcsname\cd@Open
+			\expandafter\chardef\csname #1@Stream\endcsname\cd@ProduceStream
+			\immediate\openout\cd@ProduceStream=#1 %
+			\let\cd@NoFileWarning\relax
+			\def\cd@ProduceFile{\immediate\write\cd@ProduceStream}
+			\let\cd@next\cd@GetFile@Produce
+		\fi
+	\else\chardef\cd@ProduceStream\cd@ProduceCount
+		\cd@Tracing{I will now produce file #1}
+		\ifx\cd@CurrentFile\cd@empty
+		\else
+			\ifcd@autoclose
+				\cd@Tracing{I close file \cd@CurrentFile\space (autoclose mode)}
+				\expandafter\let\csname \cd@CurrentFile @Status\endcsname\cd@Closed
+			\else
+				\expandafter\let\csname \cd@CurrentFile @Status\endcsname\cd@Wait
+			\fi
+		\fi
+		\def\cd@CurrentFile{#1}
+		\expandafter\let\csname #1@Status\endcsname\cd@Open
+		\expandafter\chardef\csname #1@Stream\endcsname\cd@ProduceStream
+		\immediate\openout\cd@ProduceStream=#1 %
+		\let\cd@NoFileWarning\relax
+		\def\cd@ProduceFile{\immediate\write\cd@ProduceStream}
+		\ifcd@autoclose
+		\else
+			\advance\cd@ProduceCount\@ne
+		\fi
+		\let\cd@next\cd@GetFile@Produce
+	\fi\fi\fi\fi\cd@next}
+
+\def\cd@GetFile@Produce{
+	\bgroup
+		\UndoShortCode@Produce
+		\UndoShortVerb@Produce
+		\catcode`\\\z@
+		\gdef\FileName{}
+		\gdef\FileVersion{}
+		\gdef\FileDate{}
+		\@ifnextchar[
+			\cd@GetFileName@Produce
+			{\ifcd@noheader\else\cd@Header\fi}}
+\def\cd@GetFileName@Produce[#1]{
+	\xdef\FileName{#1}
+	\@ifnextchar[
+		\cd@GetFileVersion@Produce
+		{\ifcd@noheader\else\cd@Header\fi\egroup}}
+\def\cd@GetFileVersion@Produce[#1]{%
+	\xdef\FileVersion{#1}
+	\@ifnextchar[
+		\cd@GetFileDate@Produce
+		{\ifcd@noheader\else\cd@Header\fi\egroup}}
+\def\cd@GetFileDate@Produce[#1]{%
+	\xdef\FileDate{#1}
+	\ifcd@noheader\else\cd@Header\fi\egroup}
+
+\def\CloseFile@@Produce#1{
+	\ifcd@autoclose
+		\expandafter\ifx\csname #1@Status\endcsname\relax
+			\cd@CDWarning{%
+				You haven't opened `#1'. Closing it does nothing.^^J%
+				Besides, you're in autoclose mode. \string\CloseFile\space is redundant.}
+		\else\expandafter\ifx\csname #1@Status\endcsname\cd@Closed
+			\cd@CDWarning{%
+				`#1' was already closed. Closing it again does nothing.^^J%
+				Besides, you're in autoclose mode. \string\CloseFile\space is redundant.}
+		\else
+			\cd@CDWarning{%
+				You're in autoclose mode.	\string\CloseFile\space is redundant.}
+		\fi\fi%
+	\else
+		\expandafter\ifx\csname #1@Status\endcsname\relax
+			\cd@CDWarning{%
+				You haven't opened `#1'. Closing it does nothing.}
+		\else\expandafter\ifx\csname #1@Status\endcsname\cd@Closed
+			\cd@CDWarning{%
+				`#1' was already closed. Closing it again does nothing.}
+		\else
+			\cd@Tracing{I close file #1}
+			\expandafter\let\csname #1@Status\endcsname\cd@Closed
+			\def\cd@TempFile{#1}
+			\ifx\cd@TempFile\cd@CurrentFile
+				\def\cd@NoFileWarning{\cd@CDWarning{No file in production. This code will be lost.}}
+				\def\cd@ProduceFile##1{}%
+			\fi
+			\edef\cd@StreamList{%
+				\cd@StreamList\expandafter\the\csname #1@Stream\endcsname,}
+	\fi\fi\fi}
+
+\def\cd@StreamList{}
+\def\cd@BuildList#1cd@end,{\def\cd@StreamList{#1}}
+\newif\ifcd@stream
+\def\cd@FindStream#1,{%
+	\def\cd@TempArg{#1}
+	\ifx\cd@TempArg\cd@end
+		\cd@streamfalse
+		\let\cd@@next\relax
+	\else
+		\cd@streamtrue
+		\chardef\cd@ProduceStream=#1 %
+		\let\cd@@next\cd@BuildList
+	\fi\cd@@next}
+
+\catcode`\%=12\relax
+\edef\cd@Header{
+\noexpand\cd@ProduceFile{% This is \noexpand\FileName, produced by the CodeDoc class
+^^J% with the `produce' option on.
+^^J%
+^^J% To create the documentation, compile \cd@CurrentSource
+^^J% without the `produce' option.
+^^J%
+^^J% SOURCE: \noexpand\cd@CurrentSource
+^^J% DATE: \noexpand\FileDate
+^^J% VERSION: \noexpand\FileVersion
+}}
+\catcode`\%=14\relax
+
+\makeatother
diff --git a/Master/tlpkg/bin/tlpkg-ctan-check b/Master/tlpkg/bin/tlpkg-ctan-check
index c238ab3a5cb..2e87a083726 100755
--- a/Master/tlpkg/bin/tlpkg-ctan-check
+++ b/Master/tlpkg/bin/tlpkg-ctan-check
@@ -51,7 +51,7 @@ my @WorkingTLP = qw(
           citeref cjhebrew cjk cjw classicthesis
           clefval cleveref
           clock clrscode cm-super
-          cmap cmcyr cmdstring cmdtrack cmll cmpica codepage colorinfo
+          cmap cmcyr cmdstring cmdtrack cmll cmpica codedoc codepage colorinfo
           colortbl colorwav commath compactbib complexity comprehensive
           computational-complexity confproc constants
           context-account context-bnf context-chromato 
diff --git a/Master/tlpkg/tlpsrc/codedoc.tlpsrc b/Master/tlpkg/tlpsrc/codedoc.tlpsrc
new file mode 100644
index 00000000000..2fc536781a9
--- /dev/null
+++ b/Master/tlpkg/tlpsrc/codedoc.tlpsrc
@@ -0,0 +1,2 @@
+name codedoc
+category Package
diff --git a/Master/tlpkg/tlpsrc/collection-latexextra.tlpsrc b/Master/tlpkg/tlpsrc/collection-latexextra.tlpsrc
index a32bf21caf2..2ecc6229033 100644
--- a/Master/tlpkg/tlpsrc/collection-latexextra.tlpsrc
+++ b/Master/tlpkg/tlpsrc/collection-latexextra.tlpsrc
@@ -73,6 +73,7 @@ depend clock
 depend cmdstring
 depend cmdtrack
 depend cmsd
+depend codedoc
 depend codepage
 depend colorinfo
 depend colorwav