memoir update 07-12-19

git-svn-id: svn://tug.org/texlive/trunk@5807 c570f23f-e606-0410-a88d-b1316a301751

4 files changed, 1851 insertions, 83 deletions

diff --git a/Master/texmf-dist/doc/latex/memoir/README b/Master/texmf-dist/doc/latex/memoir/README
index 55a9e3ffb30..246fb006030 100644
--- a/Master/texmf-dist/doc/latex/memoir/README
+++ b/Master/texmf-dist/doc/latex/memoir/README
@@ -5,6 +5,12 @@ as the normal font size. Many methods are provided to let you create
 your particular design. The class incorporates over 30 of the more
 popular packages.
 
+    NOTE: Please DO NOT TRY TO CONTACT ME DIRECTLY as I am away more
+than I am here. You will get faster and better response to your questions
+by asking on the comp.text.tex newsgroup (CTT), or the texhax mailing list 
+(which I do not read). If you really have found a bug, then try me but
+also report on CTT.
+
     NOTE: In order to provide fixes for any problems that may arise
 between major releases, you may find a file called mempatch.sty
 which contains any current fixes for the memoir class. The class
@@ -23,6 +29,18 @@ use the memhfixc package after the hyperref package, e.g.,
 ...
 Later versions of the hyperref package automatically load the memhfixc package.
 
+Changes (2007/12/14)
+o New version (4.9) of mempatch.sty, fixing all known bugs and adding minor
+  enhancements
+o New version of the Addendum
+o NO CHANGES TO THE USER MANUAL
+
+    I hope that the next release will be the final version of memoir. There
+will be a new version of the USER MANUAL, and both mempatch.sty and the
+Addendum should be empty.
+
+
+
 Changes (2007/01/22)
 o New version (4.8) of mempatch.sty, fixing the abstract environment and
   other minor infelicities.
@@ -298,6 +316,6 @@ o Run (pdf)latex twice more on memman.tex
 o Print the manual
 
 
-2007/01/22
+2007/12/14
 Peter Wilson
 herries dot press at earthlink dot net
diff --git a/Master/texmf-dist/doc/latex/memoir/memmanadd.pdf b/Master/texmf-dist/doc/latex/memoir/memmanadd.pdf
index ec79273dead..c3da1d94452 100644
--- a/Master/texmf-dist/doc/latex/memoir/memmanadd.pdf
+++ b/Master/texmf-dist/doc/latex/memoir/memmanadd.pdf
diff --git a/Master/texmf-dist/source/latex/memoir/mempatch.dtx b/Master/texmf-dist/source/latex/memoir/mempatch.dtx
index 687682ca40f..731c5294124 100755
--- a/Master/texmf-dist/source/latex/memoir/mempatch.dtx
+++ b/Master/texmf-dist/source/latex/memoir/mempatch.dtx
@@ -19,7 +19,7 @@
 %
 % 
 % \fi
-% \CheckSum{6253}
+% \CheckSum{7275}
 %
 % \def\dtxfile{\texttt{mempatch.dtx}}
 % \def\fileversion{v1.0} \def\filedate{2003/10/04}
@@ -56,6 +56,7 @@
 % \def\fileversion{v4.6} \def\filedate{2006/12/11}
 % \def\fileversion{v4.7} \def\filedate{2006/12/23}
 % \def\fileversion{v4.8} \def\filedate{2007/01/22}
+% \def\fileversion{v4.9} \def\filedate{2007/12/14}
 %
 % \title{The LaTeX \Lpack{memoir} class for configurable book 
 %        typesetting: Code patches\thanks{This
@@ -152,6 +153,12 @@
 \renewcommand{\MakeUppercase}[1]{#1}
 \pagestyle{headings}
 %    \end{macrocode}
+% Need more space for ToC subsection numbers
+%    \begin{macrocode}
+\makeatletter
+\renewcommand*{\l@subsection}{\@dottedtocline{2}{1.5em}{3.2em}}
+
+%    \end{macrocode}
 %    We may use many \file{docstrip} modules so we set the
 %    \texttt{StandardModuleDepth} counter to 1.
 %    \begin{macrocode}
@@ -778,8 +785,9 @@
 % ^^A \ProvidesFile{mempatch.sty}[2006/08/08 v4.5 Patches for memoir class v1.618]
 % ^^A \ProvidesFile{mempatch.sty}[2006/12/11 v4.6 Patches for memoir class v1.618]
 % ^^A \ProvidesFile{mempatch.sty}[2006/12/23 v4.7 Patches for memoir class v1.618]
+% ^^A \ProvidesFile{mempatch.sty}[2007/01/22 v4.8 Patches for memoir class v1.618]
 %    \begin{macrocode}
-\ProvidesFile{mempatch.sty}[2007/01/22 v4.8 Patches for memoir class v1.618]
+\ProvidesFile{mempatch.sty}[2007/12/14 v4.9 Patches for memoir class v1.618]
 
 
 %%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%
@@ -807,6 +815,11 @@
 %%%   Version 4.7 fixes tiny bugs introduced in version 4.6
 %%%
 %%%   Version 4.8 fixes some more little bugs.
+%%%
+%%%   Version 4.9 fixes yet more bugs. It also provides means of formatting
+%%% page numbers in the ToC, etc., and improved control over line numbering
+%%% for verses and boxed verbatims.
+%%%
 %%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%
 
 %    \end{macrocode}
@@ -1897,6 +1910,14 @@
 % \end{macro}
 % \end{macro}
 %
+% \begin{macro}{\midpartskip}
+% \changes{v4.9}{2007/11/30}{Changed space in \cs{midpartskip}.}
+%    \begin{macrocode}
+\renewcommand{\midpartskip}{\par\vskip 2\onelineskip}
+
+%    \end{macrocode}
+% \end{macro}
+%
 % \subsection{Book document division}
 %
 %    Frederic Connes tells me that in French typography there is often
@@ -1948,7 +1969,7 @@
 % \begin{macro}{\afterbookskip}
 %    \begin{macrocode}
 \newcommand*{\beforebookskip}{\null\vfil}
-\newcommand*{\midbookskip}{\par \vskip 2\baselineskip}
+\newcommand*{\midbookskip}{\par \vskip 2\onelineskip}
 \newcommand*{\afterbookskip}{\vfil\newpage}
 
 %    \end{macrocode}
@@ -2011,9 +2032,11 @@
 %
 % \begin{macro}{\membookinfo}
 % \begin{macro}{\membookstarinfo}
+% \changes{v4.9}{2007/08/26}{Made \cs{membookinfo} and \cs{membookstarinfo}
+%                            \cs{long}}
 %    \begin{macrocode}
-\newcommand*{\membookinfo}[3]{}
-\newcommand*{\membookstarinfo}[1]{}
+\newcommand{\membookinfo}[3]{}
+\newcommand{\membookstarinfo}[1]{}
 
 %    \end{macrocode}
 % \end{macro}
@@ -2149,6 +2172,8 @@
 % \begin{macro}{\cftbookpagefont}
 % \begin{macro}{\cftbookafterpnum}
 % \begin{macro}{\cftbookfillnum}
+% \begin{macro}{\cftbookformatpnum}
+% \changes{v4.9}{2007/08/20}{Added \cs{cftbookformatpnum}}
 %    \begin{macrocode}
 %  ToC layout parameters.
 \newlength{\cftbeforebookskip}
@@ -2168,8 +2193,11 @@
 \newcommand{\cftbookafterpnum}{}
 \newcommand{\cftbookfillnum}[1]{%
   {\cftbookleader}%
-  {\hb@xt@\@pnumwidth{\hss {\cftbookpagefont #1}}}%
+%%%%  {\hb@xt@\@pnumwidth{\hss {\cftbookpagefont #1}}}%
+  \cftbookformatpnum{#1}%
   \cftbookafterpnum\par}
+\newcommand{\cftbookformatpnum}[1]{%
+  \hb@xt@\@pnumwidth{\hss {\cftbookpagefont #1}}}
 
 %    \end{macrocode}
 % \end{macro}
@@ -2184,6 +2212,7 @@
 % \end{macro}
 % \end{macro}
 % \end{macro}
+% \end{macro}
 %
 % \begin{macro}{\@setclcnt}
 % Add the book to \cs{@setclcnt}
@@ -2315,7 +2344,7 @@
 % \Lpack{hyperref} needs \verb?\tocdepth? set in the body not just in the ToC.
 %    \begin{macrocode}
     \@ifundefined{toclevel@#1}{%
-      @memwarn{Unknown toclevel for #1}%
+      \@memwarn{Unknown toclevel for #1}%
     }{%
       \setcounter{tocdepth}{\@nameuse{toclevel@#1}}%
     }
@@ -2605,6 +2634,11 @@
     \fi
     \setbox0=\vtop to 0pt{%
       \begin{minipage}[t]{\marginparwidth}%
+%    \end{macrocode}
+% Normalise the font (suggested by Lars Madsen).
+% \changes{v4.9}{2007/05/02}{Normalised font in \cs{@sidepar}}
+%    \begin{macrocode}
+        \normalfont\normalsize
         \ifoddpage #2\else #1\fi%
       \end{minipage}%
       \vss}%
@@ -3115,15 +3149,28 @@
   \@namedef{cft#2pagefont}{\normalfont}
   \@namedef{cft#2afterpnum}{}
   \@namedef{cft#2toclevel@#2}{#4}
+  \@namedef{cft#2formatpnum}##1{%
+    \hb@xt@\@pnumwidth{\hfil\@nameuse{cft#2pagefont}##1}}
   \@namedef{cft#2fillnum}##1{%
     {\@nameuse{cft#2leader}}\nobreak
-    \hb@xt@\@pnumwidth{%
-      \hfil\@nameuse{cft#2pagefont}##1}\@nameuse{cft#2afterpnum}\par}
+%    \end{macrocode}
+% Dan Luecking (\ctt{} \textit{Re: setting page numbers in toc in their
+% natural-width box}, 15 August 2007) suggested that there should be a macro
+% here instead of:
+% \begin{verbatim}
+%    \hb@xt@\@pnumwidth{%
+%      \hfil\@nameuse{cft#2pagefont}##1}
+% \end{verbatim}
+% \changes{v4.9}{2007/08/20}{Changed \cs{newlistentry} to accomodate \cs{cftXformatpnum}}
+%    \begin{macrocode}
+    \@nameuse{cft#2formatpnum}{##1}%
+    \@nameuse{cft#2afterpnum}\par}
 }% end of \newlistentry
 
 %    \end{macrocode}
 % \end{macro}
 %
+% Now redo the \cs{newlistentry}s to effect the above changes.
 %    \begin{macrocode}
 \let\cftbeforesectionskip\relax
 \let\cftsectionindent\relax
@@ -3167,6 +3214,45 @@
 
 %    \end{macrocode}
 %
+% \begin{macro}{\cftpartformatpnum}
+% \begin{macro}{\cftpartfillnum}
+% \begin{macro}{\cftchapterformatpnum}
+% \begin{macro}{\cftchapterfillnum}
+% \changes{v4.9}{2007/08/20}{Added \cs{cftpartformatpnum} and \cs{cftchapterformatpnum}}
+% But we also have to change the \cs{part} and \cs{chapter} entries in the
+% ToC for the new \cs{cftXformatpnum} macros.
+%    \begin{macrocode}
+\newcommand{\cftpartformatpnum}[1]{%
+  \hb@xt@\@pnumwidth{\hss {\cftpartpagefont #1}}}
+\renewcommand{\cftpartfillnum}[1]{%
+  {\cftpartleader}{\cftpartformatpnum{#1}}%
+  \cftpartafterpnum\par}
+\newcommand{\cftchapterformatpnum}[1]{%
+  \hb@xt@\@pnumwidth{\hfil{\cftchapterpagefont #1}}}
+\renewcommand{\cftchapterfillnum}[1]{%
+  {\cftchapterleader}\nobreak\cftchapterformatpnum{#1}%
+  \cftchapterafterpnum\par}
+
+%    \end{macrocode}
+% \end{macro}
+% \end{macro}
+% \end{macro}
+% \end{macro}
+%
+% \begin{macro}{\cftpagenumberson}
+% We also have to change \cs{cftpagenumberson} to accomodate 
+% \cs{cftXformatpnum}.
+% \changes{v4.9}{2007/08/20}{Modified \cs{cftpagenumberson} for \cs{cftXformatpnum}.}
+%    \begin{macrocode}
+\DeclareRobustCommand{\cftpagenumberson}[1]{%
+  \@namedef{cft#1fillnum}##1{%
+    \@nameuse{cft#1leader}\nobreak
+    \@nameuse{cft#1formatpnum}{##1}%
+    \@nameuse{cft#1afterpnum}\par}}
+
+%    \end{macrocode}
+% \end{macro}
+%
 % \subsection{Page layout}
 %
 % Morten H{\o}gholm suggested (2006/07/26) that instead of using TeX syntax I should use
@@ -3429,7 +3515,7 @@
 % \begin{macro}{\m@mnearestht}
 % The adjustment of the \cs{textheight} to get an integral number 
 % of lines with the calculated height being as the closest to the given 
-% height. Algorithm supplied by Lars Madsen and Morten H{\o}lmgren on
+% height. Algorithm supplied by Lars Madsen and Morten H{\o}gholm on
 % 2006/07/27.
 %    \begin{macrocode}
 \newcommand*{\m@mnearestht}{%
@@ -3448,7 +3534,7 @@
 % \cs{checkthelayout}\oarg{text} is the user level macro for
 % checking the layout. The \meta{text} argument controls which
 % algorithm should be used to calculate the \cs{textheight}.
-%
+% \changes{v4.9}{2007/11/14}{Changed some page layout tests to negative from zero or negative}
 %    \begin{macrocode}
 \renewcommand*{\checkthelayout}[1][classic]{%
 %    \end{macrocode}
@@ -3459,18 +3545,25 @@
   \@memznegtest{\stockwidth}
   \@memznegtest{\paperwidth}
   \@memznegtest{\textwidth}
-  \@memznegtest{\spinemargin}
-  \@memznegtest{\foremargin}
+%%%  \@memznegtest{\spinemargin}
+  \@memnegtest{\spinemargin}
+%%%  \@memznegtest{\foremargin}
+  \@memnegtest{\foremargin}
   \@memznegtest{\marginparsep}
   \@memznegtest{\marginparwidth}
   \@memznegtest{\stockheight}
   \@memznegtest{\paperheight}
   \@memznegtest{\textheight}
-  \@memznegtest{\uppermargin}
-  \@memznegtest{\lowermargin}
-  \@memznegtest{\headheight}
-  \@memznegtest{\headsep}
-  \@memznegtest{\footskip}
+%%%  \@memznegtest{\uppermargin}
+  \@memnegtest{\uppermargin}
+%%%  \@memznegtest{\lowermargin}
+  \@memnegtest{\lowermargin}
+%%%  \@memznegtest{\headheight}
+  \@memnegtest{\headheight}
+%%%  \@memznegtest{\headsep}
+  \@memnegtest{\headsep}
+%%%  \@memznegtest{\footskip}
+  \@memnegtest{\footskip}
 %    \end{macrocode}
 %
 %    Carry on regardless. We may need to adjust the \cs{textheight} 
@@ -3633,7 +3726,7 @@
 % \begin{macro}{\everylistparindent}
 % \begin{macro}{\list}
 % The kernel sets \cs{listparindent} to zero within a \cs{list}, where it
-% can be overridden in \cs{lits}'s second argument. Here it is set to
+% can be overridden in \cs{list}'s second argument. Here it is set to
 % \cs{everyparlistindent} by default, which in turn is 0pt.
 %    \begin{macrocode}
 \newdimen\everylistparindent
@@ -3668,6 +3761,8 @@
 % \begin{macro}{\defaultlists}
 %  This is a simplification of memoir's original, and will apply to any font
 % size.
+% \changes{v4.9}{2007/11/24}{Set \cs{everyparlistindent} to \cs{parindent} in
+%  \cs{defaultlists} and \cs{firmlists}}
 %    \begin{macrocode}
 \renewcommand*{\defaultlists}{%
   \setlength{\partopsep}{0.2\onelineskip \@plus 0.1\onelineskip 
@@ -3679,7 +3774,7 @@
   \parsepii = 0.1667\onelineskip \@plus \p@ \@minus \p@
   \topsepii = \parsepi
   \topsepiii = \parsepii
-  \everylistparindent \z@}
+  \everylistparindent \listparindent}
 \defaultlists
 
 %    \end{macrocode}
@@ -3714,7 +3809,7 @@
   \parsepii = 0.0833\onelineskip \@plus \p@ \@minus \p@
   \topsepii = \parsepi
   \topsepiii = \parsepii
-  \everylistparindent\z@}
+  \everylistparindent\listparindent}
 
 \newcommand*{\m@mfirmlists}{
   \setlength{\partopsep}{0.1\onelineskip \@plus 0.05\onelineskip 
@@ -3725,7 +3820,7 @@
   \parsepii = 0.0833\onelineskip \@plus \p@ \@minus \p@
   \topsepii = \parsepi
   \topsepiii = \parsepii
-  \everylistparindent\z@}
+  \everylistparindent\listparindent}
 
 %    \end{macrocode}
 % \end{macro}
@@ -5099,7 +5194,7 @@
     \@namedef{#1@evenhead}{%
 %    \end{macrocode}
 % The code for the definition of \cs{@evenhead} and friends is based on code
-% from Piet van Oostrum's \Lpack{fancyhdr} package~\cite{FANCYHDR}. The three
+% from Piet van Oostrum's \Lpack{fancyhdr} package. The three
 % parts of the header are put into parboxes, with fills between them, and
 % the whole lot is put into a box the width of the header. Fillers are put
 % before and after the main box which control the header position.
@@ -5343,11 +5438,32 @@
 %    \end{macrocode}
 % \end{macro}
 %
+% \begin{macro}{\nouppercaseheads}
+% \begin{macro}{\uppercaseheads}
+% \begin{macro}{\memUChead}
+% Spurred by Lars Madsen's \Lpack{memexsupp} v0.05 package here is
+% a way of switching uppercasing in the headings pagestyle.
+% \changes{v4.9}{2007/09/07}{Added uppercase switches for headings pagestyle}
+%    \begin{macrocode}
+\newcommand*{\nouppercaseheads}{%
+  \let\memUChead\relax}
+\newcommand*{\uppercaseheads}{%
+  \let\memUChead\MakeUppercase}
+\uppercaseheads
+
+%    \end{macrocode}
+% \end{macro}
+% \end{macro}
+% \end{macro}
+%
 % \begin{macro}{\ps@headings}
 %    The \pstyle{headings} pagestyle behaves differently for
 % twosided and onesided printing. This is a rewrite of the
 % standard style.
 % \changes{v1.1}{2002/03/10}{Added \cs{tocmark} etc., to \cs{ps@headings}}
+% \changes{v4.9}{2007/09/07}{Removed \cs{@mkboth} as is never used}
+% \changes{v4.9}{2007/09/07}{Replaced \cs{MakeUppercase} by \cs{memUChead} in headings pagestyle}
+% \changes{v4.9}{2007/11/11}{For twosided docs set both marks for ToC, etc (suggested by Lars Madsen)}
 %    \begin{macrocode}
 \if@twoside
 %    \end{macrocode}
@@ -5356,22 +5472,22 @@
 %    \begin{macrocode}
   \makepagestyle{headings}
     \makepsmarks{headings}{%
-      \let\@mkboth\markboth
+%%%      \let\@mkboth\markboth
       \def\chaptermark##1{%
-        \markboth{\MakeUppercase{%
+        \markboth{\memUChead{%
           \ifnum \c@secnumdepth >\m@ne
             \if@mainmatter
               \@chapapp\ \thechapter. \ %
             \fi
           \fi
           ##1}}{}}%
-      \def\tocmark{\markboth{\MakeUppercase{\contentsname}}{}}%
-      \def\lofmark{\markboth{\MakeUppercase{\listfigurename}}{}}%
-      \def\lotmark{\markboth{\MakeUppercase{\listtablename}}{}}%
-      \def\bibmark{\markboth{\MakeUppercase{\bibname}}{}}%
-      \def\indexmark{\markboth{\MakeUppercase{\indexname}}{}}%
+      \def\tocmark{\markboth{\memUChead{\contentsname}}{\memUChead{\contentsname}}}%
+      \def\lofmark{\markboth{\memUChead{\listfigurename}}{\memUChead{\listfigurename}}}%
+      \def\lotmark{\markboth{\memUChead{\listtablename}}{\memUChead{\listtablename}}}%
+      \def\bibmark{\markboth{\memUChead{\bibname}}{\memUChead{\bibname}}}%
+      \def\indexmark{\markboth{\memUChead{\indexname}}{\memUChead{\indexname}}}%
       \def\sectionmark##1{%
-        \markright{\MakeUppercase{%
+        \markright{\memUChead{%
           \ifnum \c@secnumdepth > \z@
             \thesection. \ %
           \fi
@@ -5387,20 +5503,20 @@
 %    \begin{macrocode}
   \makepagestyle{headings}
     \makepsmarks{headings}{%
-      \let\@mkboth\markboth
+%%%      \let\@mkboth\markboth
       \def\chaptermark##1{%
-        \markright{\MakeUppercase{%
+        \markright{\memUChead{%
           \ifnum \c@secnumdepth >\m@ne
             \if@mainmatter
               \@chapapp\ \thechapter. \ %
             \fi
           \fi
           ##1}}}%
-      \def\tocmark{\markright{\MakeUppercase{\contentsname}}}%
-      \def\lofmark{\markright{\MakeUppercase{\listfigurename}}}%
-      \def\lotmark{\markright{\MakeUppercase{\listtablename}}}%
-      \def\bibmark{\markright{\MakeUppercase{\bibname}}}%
-      \def\indexmark{\markright{\MakeUppercase{\indexname}}}%
+      \def\tocmark{\markright{\memUChead{\contentsname}}}%
+      \def\lofmark{\markright{\memUChead{\listfigurename}}}%
+      \def\lotmark{\markright{\memUChead{\listtablename}}}%
+      \def\bibmark{\markright{\memUChead{\bibname}}}%
+      \def\indexmark{\markright{\memUChead{\indexname}}}%
     }
     \makeoddhead{headings}{\slshape\rightmark}{}{\thepage}
 \fi
@@ -5429,7 +5545,7 @@
 %    \begin{macrocode}
 \makepagestyle{myheadings}
   \makepsmarks{myheadings}{%
-    \let\@mkboth\@gobbletwo
+%%%    \let\@mkboth\@gobbletwo
     \let\chaptermark\@gobble
     \let\sectionmark\@gobble
     \def\tocmark{}%
@@ -5513,7 +5629,7 @@
 % \changes{v1.1}{2002/03/10}{Changed \cs{@ruledmarks} to cater for tocbibind}
 %    \begin{macrocode}
 \renewcommand*{\@ruledmarks}{%
-  \let\@mkboth\markboth
+%%%  \let\@mkboth\markboth
   \def\chaptermark##1{%
     \markboth{%
       \ifnum \c@secnumdepth >\m@ne
@@ -5580,7 +5696,7 @@
 \makeheadrule{companion}{\headwidth}{\normalrulethickness}
 \makeheadposition{companion}{flushright}{flushleft}{}{}
 \makepsmarks{companion}{%
-  \let\@mkboth\markboth
+%%%  \let\@mkboth\markboth
   \def\chaptermark##1{\markboth{##1}{##1}}    % left mark & right marks
   \def\sectionmark##1{\markright{%
     \ifnum \c@secnumdepth>\z@
@@ -5821,6 +5937,7 @@
 %    \begin{macrocode}
 %% Stefano Bianchi, ctt 2003/12/09 `New chapter style: chapter vs chapter*'
 \makechapterstyle{bianchi}{%
+  \chapterstyle{default}
   \renewcommand*{\chapnamefont}{\normalfont\Large\sffamily\itshape}
   \renewcommand*{\chapnumfont}{\normalfont\huge}
   \renewcommand*{\printchaptername}{%
@@ -5841,6 +5958,7 @@
 % My bringhurst style.
 %    \begin{macrocode}
 \makechapterstyle{bringhurst}{%
+  \chapterstyle{default}
   \renewcommand*{\chapterheadstart}{}
   \renewcommand*{\printchaptername}{}
   \renewcommand*{\chapternamenum}{}
@@ -5860,6 +5978,7 @@
 % 2006/12/09, \textit{An example of a novel?}.
 %    \begin{macrocode}
 \makechapterstyle{brotherton}{%
+  \chapterstyle{default}
   \renewcommand*{\printchapternum}{\chapnumfont 
     \ifanappendix \thechapter \else \numtoName{\c@chapter}\fi}}
 
@@ -5870,6 +5989,7 @@
 % My Chappell style
 %    \begin{macrocode}
 \makechapterstyle{chappell}{%
+  \chapterstyle{default}
   \setlength{\beforechapskip}{0pt}
   \renewcommand*{\chapnamefont}{\large\centering}
   \renewcommand*{\chapnumfont}{\large}
@@ -5888,12 +6008,14 @@
 % By me in an answer to Christopher Culver on CTT, 
 % \textit{"Biblical" formatting, how?} on 2004/03/29,where I called it 
 % the `biblical' style.
+% \changes{v4.9}{2007/11/14}{Changed culver chapterstyle to match description}
 %    \begin{macrocode}
 \makechapterstyle{culver}{%
+  \chapterstyle{default}
   \chapterstyle{article}%
-%%%  \renewcommand*{\thechapter}{\Roman{chapter}}
+  \renewcommand*{\thechapter}{\Roman{chapter}}
   \renewcommand*{\printchapternum}{% center number/title
-    \centering\chapnumfont \thechapter\space}%
+    \centering\chapnumfont \thechapter\space\space}%
   \renewcommand*{\printchapternonum}{\centering}
   \renewcommand*{\clearforchapter}{}% no new page
   \aliaspagestyle{chapter}{headings}% no special pagestyle
@@ -5906,6 +6028,7 @@
 % A very simple style of mine but I couldn't think of a good name for it.
 %    \begin{macrocode}
 \makechapterstyle{dash}{%
+  \chapterstyle{default}
   \setlength{\beforechapskip}{5\onelineskip}
   \renewcommand*{\printchaptername}{}
   \renewcommand*{\chapternamenum}{}
@@ -5928,6 +6051,7 @@
 % My second version of the demo chapterstyle.
 %    \begin{macrocode}
 \makechapterstyle{demo2}{%
+  \chapterstyle{default}
   \renewcommand*{\printchaptername}{\centering}
   \renewcommand*{\printchapternum}{\chapnumfont 
      \ifanappendix \thechapter \else \numtoName{\c@chapter}\fi}
@@ -5946,10 +6070,37 @@
 %    \end{macrocode}
 % \end{macro}
 %
+% \begin{macro}{\chs@demo3}
+% My third version of the demo chapterstyle.
+% \changes{v4.9}{2007/11/14}{Added demo3 chapterstyle}
+%    \begin{macrocode}
+\makechapterstyle{demo3}{%
+  \chapterstyle{default}
+  \renewcommand*{\printchaptername}{\centering}
+  \renewcommand*{\chapnumfont}{\normalfont\HUGE\itshape}
+  \renewcommand*{\printchapternum}{\chapnumfont 
+     \ifanappendix \thechapter \else \numtoName{\c@chapter}\fi}
+  \renewcommand*{\chaptitlefont}{\normalfont\Huge\sffamily}
+  \renewcommand*{\printchaptertitle}[1]{%
+    \hrule\vskip\onelineskip \raggedleft \chaptitlefont ##1}
+  \renewcommand*{\afterchaptertitle}{%
+    \vskip\onelineskip \hrule\vskip \afterchapskip}
+  \setlength{\beforechapskip}{0pt}
+  \setlength{\midchapskip}{2\onelineskip}
+  \setlength{\afterchapskip}{2\onelineskip}
+  \renewcommand*{\printchapternonum}{%
+    \vphantom{\chapnumfont One}
+    \afterchapternum%
+    \vskip\topskip}}
+
+%    \end{macrocode}
+% \end{macro}
+%
 % \begin{macro}{\chs@ell}
 % Another of my styles which I'll probably use for my next book.
 %    \begin{macrocode}
 \makechapterstyle{ell}{%
+  \chapterstyle{default}
   \renewcommand*{\chapnumfont}{\normalfont\HUGE\sffamily}
   \renewcommand*{\chaptitlefont}{\normalfont\huge\sffamily}
   \settowidth{\chapindent}{\chapnumfont 111}
@@ -5980,6 +6131,7 @@
 %    \begin{macrocode}
 %% Gerardo Garcia, ctt 2002/04/12, `Fancy Headings, Chapter Headings
 \makechapterstyle{ger}{%
+  \chapterstyle{default}
   \renewcommand*{\chapterheadstart}{\vspace*{\beforechapskip}
   \mbox{}\\\mbox{}\rule[0pt]{\textwidth}{0.4pt}\par}
   \setlength{\midchapskip}{20pt}
@@ -5995,6 +6147,7 @@
 % new length and adjusted the unnumbered appearance.
 %    \begin{macrocode}
 \makechapterstyle{lyhne}{%  needs graphicx package
+  \chapterstyle{default}
   \setlength{\beforechapskip}{1.5cm}
   \setlength{\afterchapskip}{1cm}
   \setlength{\midchapskip}{2cm}
@@ -6021,6 +6174,7 @@
 %% posted to ctt, December 2003
 %%%% \usepackage{graphicx}
 \makechapterstyle{madsen}{%
+  \chapterstyle{default}
   \renewcommand*{\chapnamefont}{%
     \normalfont\Large\scshape\raggedleft}
   \renewcommand*{\chaptitlefont}{%
@@ -6051,6 +6205,7 @@
 \newcommand*{\colorchapnum}{}
 \newcommand*{\colorchaptitle}{}
 \makechapterstyle{pedersen}{%
+  \chapterstyle{default}
   \setlength{\beforechapskip}{-20pt}
   \setlength{\afterchapskip}{10pt}
   \renewcommand*{\chapnamefont}{\normalfont\LARGE\itshape}
@@ -6077,6 +6232,7 @@
 %    \begin{macrocode}
 %% Thomas Dye's southall chapter style
 \makechapterstyle{southall}{%
+  \chapterstyle{default}
   \setlength{\afterchapskip}{5\baselineskip}
   \setlength{\beforechapskip}{36pt}%    \headindent
   \setlength{\midchapskip}{\textwidth}% \rightblock
@@ -6108,6 +6264,7 @@
 % it to cater for multiline titles, appendices, and unnumbered chapters.
 %    \begin{macrocode}
 \makechapterstyle{thatcher}{%
+  \chapterstyle{default}
   \renewcommand*{\chapterheadstart}{}
   \renewcommand*{\printchaptername}{%
     \centerline{\chapnumfont{\@chapapp\ \thechapter}}}
@@ -6136,6 +6293,7 @@
 %% will not display accurately. It requires the graphicx package.
 %%%% \usepackage{graphicx}
 \makechapterstyle{veelo}{%
+  \chapterstyle{default}
    \setlength{\afterchapskip}{40pt}
   \renewcommand*{\chapterheadstart}{\vspace*{40pt}}
   \renewcommand*{\afterchapternum}{\par\nobreak\vskip 25pt}
@@ -6172,6 +6330,7 @@
 % Guy Verville. This version caters for unnumbered chapters.
 %    \begin{macrocode}
 \makechapterstyle{verville}{%
+  \chapterstyle{default}
   \setlength{\beforechapskip}{0pt}
   \renewcommand*{\printchaptername}{}
   \renewcommand*{\printchapternum}{%
@@ -6314,7 +6473,1066 @@
 % \end{macro}
 %
 %
-% The end of the patch file
+% \section{Mempatch version 4.9}
+%
+%    \begin{macrocode}
+%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%
+%%%% Version 4.9 (2007/05/02 and later)
+
+%    \end{macrocode}
+%
+% \subsection{New floats}
+%
+% The original went badly wrong in assigning numbers to the different
+% float types. (This was discovered by Flavian Lambert).
+%
+% \begin{macro}{\newfloat}
+% \cs{newfloat}\oarg{within}\marg{fenv}\marg{ext}\marg{capname}
+% creates the commands for a new float environment, \meta{fenv} (aka texttt{X}),
+% using \meta{ext} (aka \texttt{Z}) as the
+% file extension and \meta{capname} for the caption name.
+% \changes{v4.9}{2007/05/02}{Changed setting of \cs{ftype@X} in \cs{newfloat}}
+%    \begin{macrocode}
+\renewcommand{\newfloat}[4][\@empty]{%
+%    \end{macrocode}
+% \begin{macro}{\ftype@X}
+%  Define the float type, set it to the float counter, and double
+% the counter afterwards.
+%    \begin{macrocode}
+%%%%  \@namedef{ftype@#2}{\value{newflo@tctr}}
+%%%%  \addtocounter{newflo@tctr}{\value{newflo@tctr}}
+  \expandafter\edef\csname ftype@#2\endcsname{\the\c@newflo@tctr}
+  \advance\c@newflo@tctr \c@newflo@tctr
+%    \end{macrocode}
+% \end{macro}
+%
+% \begin{macro}{\c@X}
+% Create the counter for the caption, which must not have been previously
+% defined.
+%    \begin{macrocode}
+  \@ifundefined{c@#2}{% counter is not defined
+    \ifx \@empty#1\relax
+      \newcounter{#2}
+    \else
+      \newcounter{#2}[#1]
+      \expandafter\edef\csname the#2\endcsname{%
+  \expandafter\noexpand\csname the#1\endcsname.\noexpand\arabic{#2}}
+    \fi}{}
+  \setcounter{#2}{0}
+
+%    \end{macrocode}
+% \end{macro}
+%
+% \begin{macro}{\ext@X}
+% \begin{macro}{Zdepth}
+% Define \cs{ext@X} for the file extension and set the new \verb?Zdepth? 
+% depth counter to 1.
+%    \begin{macrocode}
+  \@namedef{ext@#2}{#3}  % file extension
+  \@ifundefined{c@#3depth}{\newcounter{#3depth}}{}
+  \setcounter{#3depth}{1}
+
+%    \end{macrocode}
+% \end{macro}
+% \end{macro}
+%
+%
+% \begin{macro}{\fps@X}
+% \begin{macro}{\fnum@X}
+% \begin{macro}{\flegX}
+% \begin{macro}{\flegtocX}
+% \cs{fps@X} is the default float placement specification, \cs{fnum@X}
+% typesets the caption name and number, and \cs{flegX} and \cs{flegtocX} 
+% are for named legends.
+%    \begin{macrocode}
+  \@namedef{fps@#2}{tbp}                     % position
+  \@namedef{fnum@#2}{#4~\@nameuse{the#2}}    % caption naming
+  \@namedef{fleg#2}{#4}                      % legend naming
+  \@namedef{flegtoc#2}##1{}                  % legend name in ToC
+
+%    \end{macrocode}
+% \end{macro}
+% \end{macro}
+% \end{macro}
+% \end{macro}
+%
+% \begin{environment}{X}
+% \begin{environment}{X*}
+% Finally define the new float environment, in both normal and starred
+% forms.
+%    \begin{macrocode}
+  \newenvironment{#2}{\@float{#2}}{\end@float}
+  \newenvironment{#2*}{\@dblfloat{#2}}{\end@dblfloat}
+%    \end{macrocode}
+% \end{environment}
+% \end{environment}
+%
+% This ends the definition of \cs{newfloat}.
+%    \begin{macrocode}
+} % end \newfloat
+
+%    \end{macrocode}
+% \end{macro}
+%
+% Now correct the settings for figures and tables, and prepare for
+% user-defined floats.
+%    \begin{macrocode}
+%%%% fix figure and table settings.
+\def\ftype@figure{1}
+\def\ftype@table{2}
+\setcounter{newflo@tctr}{4}
+
+%    \end{macrocode}
+%
+% \subsection{Boxed verbatims}
+%
+% Per Starb\"{a}ck had problems with the adjustwidth and boxedverbatim
+% combination (see CTT \textit{Re: [memoir] adjustwidth + boxedverbatim}
+% 2007/02/10) in which Lars Madsen came up with a suggestion to use
+% \cs{linewidth}.
+%
+% \begin{macro}{\@@m@mline}
+% \cs{@@line} is \verb?\def\@@line{\hb@xt@\hsize}? but I need one
+% for \cs{linewidth}.
+% \changes{v4.9}{2007/09/08}{Added \cs{@@m@mline}}
+%    \begin{macrocode}
+\newcommand*{\@@m@mline}{\hb@xt@\linewidth}
+
+%    \end{macrocode}
+% \end{macro}
+%
+% \begin{macro}{\setupboxverb@line}
+% \begin{macro}{\boxedverbatim}
+% Use \cs{linewidth} instead of \cs{hsize} in these two macros.
+% \changes{v4.9}{2007/09/08}{Used \cs{linewidth} instead of \cs{hsize} in
+%               \cs{setupboxverb@line} and \cs{boxedverbatim}}
+%    \begin{macrocode}
+\renewcommand*{\setupboxverb@line}{%
+  \par
+  \ifbvperpage
+    \output=\expandafter{\expandafter\boxverb@split \the\output}
+  \fi
+  \def\verbatim@processline{\leavevmode
+    \b@vdocount%
+    \bvleftsidehook\vbox{\advance% \hsize-.8\p@% changed to \linewidth
+                         \linewidth-.8\p@
+                         \@@line
+      {\b@vdooutside\strut\kern\bvboxsep%
+       \b@vdoinside%
+       \ift@bs
+         \tabverbatim@processline
+       \else
+         \the\verbatim@line
+       \fi
+       \hss}%
+    \kern\bvboxsep}\bvrightsidehook\par}}
+\renewcommand*{\boxedverbatim}{\begingroup
+  \let\@@line\@@m@mline%%% new in v4.9
+  \setupboxverb@line
+  \@verbatim
+  \setupbox@verb
+  \verbatim@start}
+
+%    \end{macrocode}
+% \end{macro}
+% \end{macro}
+%
+% \begin{macro}{\bvtoprulehook}
+% \begin{macro}{\bvendrulehook}
+% \begin{macro}{\bvendofpage}
+% \changes{v4.9}{2007/05/02}{Added \cs{linewidth} to boxedverbatim lines}
+%    \begin{macrocode}
+\renewcommand*{\bvtoprulehook}{\hrule width\linewidth \nobreak \vskip -0.1pt}
+\renewcommand*{\bvendrulehook}{\hrule width\linewidth}
+\renewcommand*{\bvendofpage}{\hrule width\linewidth\kern-0.4pt}
+
+%    \end{macrocode}
+% \end{macro}
+% \end{macro}
+% \end{macro}
+%
+% \subsection{Chapter precis}
+%
+% Lars Madsen found that a chapter precis bumped into the chapter title
+% when the article option was used.
+% \changes{v4.9}{2007/08/18}{Changed chapter precis spacing}
+%
+% \begin{macro}{\prechapterprecisshift}
+% (Negative) Space between chapter title and a precis. Need a different value
+% for the article option.
+%    \begin{macrocode}
+\newdimen\prechapterprecisshift
+\ifartopt
+  \prechapterprecisshift=0pt
+\else
+  \prechapterprecisshift=-2\baselineskip
+\fi
+%    \end{macrocode}
+% \end{macro}
+%
+% \begin{macro}{\precisfont}
+% Font for precis typesetting.
+%    \begin{macrocode}
+\newcommand*{\precisfont}{\normalfont\itshape}
+%    \end{macrocode}
+% \end{macro}
+%
+% \begin{macro}{\prechapterprecis}
+% Set up for typesetting the precis text (in a quote environment).
+%    \begin{macrocode}
+\renewcommand*{\prechapterprecis}{%
+  \vspace*{\prechapterprecisshift}%
+  \begin{quote}\precisfont}
+
+%    \end{macrocode}
+% \end{macro}
+%
+% \subsection{Sidebars}
+%
+% Another problem raised its head --- floats and sidebars didn't work well
+% together with the sidebar starting at odd vertical positions. As ever,
+% Donald Arseneau came to the rescue (email correspondence May 2007).
+% Even with the changes, there are still unsolved problems with full width
+% floats on top of double columns.
+% \changes{v4.9}{2007/08/18}{Another revamping of sidebar code}
+%
+% \begin{macro}{\m@mopsidebar}
+% This might be used more than once in the following code.
+%    \begin{macrocode}
+\newcommand*{\m@mopsidebar}{%
+  \ifvoid\sideins\else
+    \setbox\@outputbox \vbox{%
+      \sidecontents
+      \unvbox\@outputbox}
+  \fi}
+
+%    \end{macrocode}
+% \end{macro}
+%
+% \begin{macro}{\mem@makecol}
+% In this version of \cs{mem@makecol} the sidebar insert is done
+% after the other inserts and floats.
+%    \begin{macrocode}
+\gdef\mem@makecol{%
+  \m@m@makecolintro
+  \ifvoid\footins
+    \setbox\@outputbox \box\@cclv
+  \else
+    \setbox\@outputbox \vbox{%
+    \boxmaxdepth\@maxdepth
+    \@tempdima\dp\@cclv
+    \unvbox\@cclv
+    \vskip-\@tempdima
+    \vskip \skip\footins
+    \color@begingroup
+      \normalcolor
+      \footnoterule
+      \unvbox\footins
+    \color@endgroup
+    }
+  \fi
+  \m@mdoextrafeet
+  \m@m@makecolfloats
+  \m@mopsidebar
+  \m@m@makecoltext  
+  \global\maxdepth \@maxdepth}
+ 
+%    \end{macrocode}
+% \end{macro}
+%
+% \begin{macro}{\mem@makecolbf}
+% This is a placeholder for attempts fo fix the doublefloat problem.
+%    \begin{macrocode}
+\gdef\mem@makecolbf{%
+  \m@m@makecolintro
+  \setbox\@outputbox \box\@cclv
+  \m@m@makecolfloats
+  \m@mopsidebar
+  \ifvoid\footins
+  \else
+    \setbox\@outputbox \vbox{%
+    \boxmaxdepth\@maxdepth
+    \unvbox\@outputbox
+    \vskip \skip\footins
+    \color@begingroup
+      \normalcolor
+      \footnoterule
+      \unvbox\footins
+    \color@endgroup
+    }%
+  \fi
+  \m@m@makecoltext  
+  \global\maxdepth \@maxdepth}
+
+%    \end{macrocode}
+% \end{macro}
+%
+% \begin{macro}{\@reinserts}
+% A change here to use \cs{unvbox}\cs{sideins} instead of \cs{sidecontents}.
+%    \begin{macrocode}
+\gdef\@reinserts{%
+  \ifvoid\footins\else\insert\footins{\unvbox\footins}\fi
+  \m@mdodoreinextrafeet
+  \ifvbox\@kludgeins\insert\@kludgeins{\unvbox\@kludgeins}\fi
+  \ifvoid\sideins\else\insert\sideins{\unvbox\sideins}\fi
+}
+
+%    \end{macrocode}
+% \end{macro}
+%
+% \subsection{Float placement}
+%
+% \begin{macro}{\setfloatlocations}
+% \cs{setfloatlocations}\marg{float}\marg{locs} sets the default
+% location for the \meta{float} class of floats (e.g., \texttt{figure})
+% to \meta{locs} (initially \texttt{tbp}). For tables might use: \\
+% \verb?\setfloatlocations{table}{htbp}?
+%    \begin{macrocode}
+\newcommand*{\setfloatlocations}[2]{\@namedef{fps@#1}{#2}}
+
+%    \end{macrocode}
+% \end{macro}
+%
+% \subsection{Setting secnumdepth}
+%
+%    The interplay between setting the \Lcount{secnumdepth} counter and 
+% \Lcount{maxsecnumdepth} is not well understood. Perhaps this will help.
+%
+% \begin{macro}{\setsecnumdepth}
+% In the preamble \cs{setsecnumdepth}\marg{sec} sets both \Lcount{secnumdepth}
+% and \Lcount{maxsecnumdepth} to \meta{sec} while in the body it only sets
+% \Lcount{secnumdepth}.
+% \changes{v4.9}{2007/08/19}{Changed \cs{setsecnumdepth} to set both
+%          \Lcount{secnumdepth} and \Lcount{maxsecnumdepth} counters}
+%    \begin{macrocode}
+\renewcommand*{\setsecnumdepth}[1]{%
+  \ifx\@nodocument\relax%    after the preamble
+    \@setclcnt{#1}{secnumdepth}%
+  \else
+    \@setclcnt{#1}{secnumdepth}%
+    \@setclcnt{#1}{maxsecnumdepth}%
+  \fi}
+\setsecnumdepth{section}
+
+%    \end{macrocode}
+% \end{macro}
+% 
+% \subsection{Appendices}
+%
+% \begin{macro}{\addappheadtotoc}
+% This needs a \cs{phantomsection} for when \Lpack{hyperref} is used.
+% \changes{v4.9}{2007/08/19}{Added \cs{phantomsection} to \cs{addappheadtotoc}}
+%    \begin{macrocode}
+\renewcommand*{\addappheadtotoc}{%
+  \phantomsection\addcontentsline{toc}{chapter}{\appendixtocname}}
+
+%    \end{macrocode}
+% \end{macro}
+%
+% \subsection{Formatting TOC page numbers}
+%
+% Dan Luecking (\ctt{} \textit{Re: setting page numbers in toc in their 
+% natural-width box} 15 August 2007) suggested that a macro like 
+% \cs{cftXformatpnum} should be used for controlling the typesetting
+% of page numbers in the ToC instead of the `hard coded': \\
+% \verb?\hbox to \@pnumwidth{\hfil\cftXpagefont #1}?
+% I have implemented this, but the code is scattered in earlier `patches'
+% as much of the code to be modified was given in pre 4.9 patches.
+%
+% \subsection{Heading hooks}
+%
+%    At least one person thinks it a good idea to use multi-paragraph captions.
+% It therefore seems possible that others will want multi-paragraph sectional
+% headings.
+% 
+% \begin{macro}{\memcaptioninfo}
+% \begin{macro}{\memlegendinfo}
+% \begin{macro}{\memnamedlegendinfo}
+% \begin{macro}{\membitwocaptioninfo}
+% \begin{macro}{\membionecaptioninfo}
+% \begin{macro}{\membicaptioninfo}
+% \changes{v4.9}{2007/08/26}{Made \cs{memcaptioninfo} and friends \cs{long}}
+%    \begin{macrocode}
+\renewcommand{\memcaptioninfo}[4]{}
+\renewcommand{\memlegendinfo}[1]{}
+\renewcommand{\memnamedlegendinfo}[3]{}
+\renewcommand{\membitwonumcaptioninfo}[7]{}
+\renewcommand{\membionenumcaptioninfo}[7]{}
+\renewcommand{\membicaptioninfo}[6]{}
+
+%    \end{macrocode}
+% \end{macro}
+% \end{macro}
+% \end{macro}
+% \end{macro}
+% \end{macro}
+% \end{macro}
+%
+% \begin{macro}{\mempartinfo}
+% \begin{macro}{\mempartstarinfo}
+% \begin{macro}{\memchapinfo}
+% \begin{macro}{\memchapstarinfo}
+% \begin{macro}{\memappchapinfo}
+% \begin{macro}{\memappchapstarinfo}
+% \begin{macro}{\memsecinfo}
+% \begin{macro}{\memsecstarinfo}
+% \changes{v4.9}{2007/08/26}{Made \cs{mempartinfo} and friends \cs{long}}
+%    \begin{macrocode}
+\renewcommand{\mempartinfo}[3]{}
+\renewcommand{\mempartstarinfo}[1]{}
+\renewcommand{\memchapinfo}[4]{}
+\renewcommand{\memchapstarinfo}[2]{}
+\renewcommand{\memappchapinfo}[4]{}
+\renewcommand{\memappchapstarinfo}[2]{}
+\renewcommand{\memsecinfo}[5]{}
+\renewcommand{\memsecstarinfo}[2]{}
+
+%    \end{macrocode}
+% \end{macro}
+% \end{macro}
+% \end{macro}
+% \end{macro}
+% \end{macro}
+% \end{macro}
+% \end{macro}
+% \end{macro}
+%
+% \begin{macro}{\mempoeminfo}
+% \begin{macro}{\mempoemstarinfo}
+% \begin{macro}{\memPoemTitleinfo}
+% \begin{macro}{\memPoemTitlestarinfo}
+% \changes{v4.9}{2007/08/26}{Made \cs{mempoeminfo} and friends \cs{long}}
+%    \begin{macrocode}
+\renewcommand{\mempoeminfo}[1]{}
+\renewcommand{\mempoemstarinfo}[1]{}
+\renewcommand{\memPoemTitleinfo}[4]{}
+\renewcommand{\memPoemTitlestarinfo}[2]{}
+
+%    \end{macrocode}
+% \end{macro}
+% \end{macro}
+% \end{macro}
+% \end{macro}
+%
+% \begin{macro}{\memapppageinfo}
+% \begin{macro}{\memapppagestarinfo}
+% \begin{macro}{\memleadpageinfo}
+% \begin{macro}{\memleadpagestarinfo}
+% \changes{v4.9}{2007/08/26}{Made \cs{memapppageinfo} and friends \cs{long}}
+%    \begin{macrocode}
+\renewcommand{\memapppageinfo}[1]{}
+\renewcommand{\memapppagestarinfo}[1]{}
+\renewcommand{\memleadpageinfo}[3]{}
+\renewcommand{\memleadpagestarinfo}[2]{}
+
+%    \end{macrocode}
+% \end{macro}
+% \end{macro}
+% \end{macro}
+% \end{macro}
+% 
+% \subsection{Verse and Boxed Verbatims}
+%
+% Ignacio Fern\'{a}ndez Galv\'{a}n (email 2007/04/07) noticed that
+% \cs{vrightskip} had no effect on the verse line number positioning.
+%
+% \begin{macro}{\@vslnumright}
+% \begin{macro}{\@vslnumleft}
+% \changes{v4.9}{2007/05/02}{Replaced \cs{rightskip} by \cs{vrightskip}
+%                in \cs{@vslnumright} and \cs{@vslnumleft}}
+%    \begin{macrocode}
+\renewcommand*{\@vslnumright}{%
+  \hfill\rlap{\kern\vrightskip\kern\rightmargin%
+              \vlvnumfont\getthelinenumber{poemline}}}
+\renewcommand*{\@vslnumleft}{%
+  \hfill\rlap{\kern-\textwidth\kern-\vrightskip%
+              \vlvnumfont\getthelinenumber{poemline}}}
+
+%    \end{macrocode}
+% \end{macro}
+% \end{macro}
+%
+%
+% Somebody hiding behind the name and email address of 
+% `Person \verb?facetious_nickname@hotmail.com?' 
+% wanted to be able to set the first verse line number to other 
+% than 1, and also start printing line numbers with that line (\ctt{}
+% \textit{verse package --- line numbering} 2 January 2007). I supplied
+% code for this, asking the requestor to tell me if it worked or not but (s)he
+% never replied. It makes you wonder whether it's worth 
+% bothering to try and help folk.
+%
+% \begin{macro}{\c@memfvsline}
+% A new counter for adjustment to the starting line for printing verse
+% line numbers.
+%    \begin{macrocode}
+\newcounter{memfvsline}
+  \c@memfvsline=\z@
+%    \end{macrocode}
+% \end{macro}
+%
+% \begin{macro}{\setverselinenums}
+% \cs{setverselinenums}\marg{firstline}\marg{startnumsat} sets the first 
+% verse line number to \meta{firstline} and the first line number to be 
+% printed at
+% line \meta{startnumsat}. Use this within the \texttt{verse} environment
+% before the first verse. Note that this must hold: \\
+% \verb?firstline <= startnumsat < firstline+ poemlines?
+% \changes{v4.9}{2007/09/05}{Added \cs{setverselinenums} and modified
+%                            \cs{getthelinenumber} accordingly}
+%    \begin{macrocode}
+\newcommand*{\setverselinenums}[2]{%
+  \c@poemline #1\relax \advance\c@poemline \m@ne
+  \refstepcounter{poemline}%
+  \ifnum\z@<\linemodnum%   we are printing line numbers
+    \@tempcnta #2\relax
+    \divide\@tempcnta\linemodnum
+    \multiply\@tempcnta\linemodnum
+    \c@memfvsline #2\relax
+    \advance\c@memfvsline-\@tempcnta
+  \fi}
+%    \end{macrocode}
+% \end{macro}
+%
+% \begin{macro}{\getthelinenumber}
+% Revise this to cater for \cs{setverselinenums}.
+%    \begin{macrocode}
+\renewcommand*{\getthelinenumber}[1]{
+  \ifnum\@ne>\linemodnum% no line numbers 
+  \else
+    \ifnum\@ne=\linemodnum% every line numbered
+      \@nameuse{the#1}%
+    \else
+      \@tempcnta=\@nameuse{c@#1}%
+      \advance\@tempcnta -\c@memfvsline
+      \divide\@tempcnta \linemodnum
+      \multiply\@tempcnta \linemodnum
+      \advance\@tempcnta \c@memfvsline
+      \ifnum\@tempcnta=\@nameuse{c@#1}\@nameuse{the#1}\fi
+    \fi
+  \fi}
+    
+%    \end{macrocode}
+% \end{macro}
+%
+% And while we're at it we might as well provide similar functionality
+% for \texttt{boxedverbatim}s. Unfortunately the calculations are slightly
+% different for the two cases, so we can't share the code.
+% \begin{macro}{\c@memfbvline}
+% A new counter for adjustment to the starting line for printing 
+% \texttt{boxedverbatim} line numbers.
+%    \begin{macrocode}
+\newcounter{memfbvline}
+  \c@memfbvline=\z@
+%    \end{macrocode}
+% \end{macro}
+% 
+% \begin{macro}{\setbvlinenums}
+% \cs{setbvlinenums}\marg{firstline}\marg{startnumsat} sets the first 
+% \texttt{boxedverbatim} line number to \meta{firstline} and the first 
+% line number to be printed at line \meta{startnumsat}.
+% \changes{v4.9}{2007/09/05}{Added \cs{setbvlinenums} and \cs{getthebvlinenumber}}
+%    \begin{macrocode}
+\newcommand*{\setbvlinenums}[2]{%
+  \c@bvlinectr #1\relax \advance\c@bvlinectr \m@ne
+  \ifnum\z@<\linemodnum% we are printing lines
+    \@tempcnta #2\relax
+    \divide\@tempcnta\linemodnum
+    \multiply\@tempcnta\linemodnum
+    \c@memfbvline #2\relax
+    \advance\c@memfbvline-\@tempcnta
+  \fi}  
+%    \end{macrocode}
+% \end{macro}
+% 
+% \begin{macro}{\getthebvlinenumber}
+%    \begin{macrocode}
+\newcommand*{\getthebvlinenumber}[1]{%
+  \ifnum\@ne>\linemodnum% no line numbers
+  \else
+    \ifnum\@ne=\linemodnum% every line numbered
+      \@nameuse{the#1}%
+    \else
+      \@tempcnta=\@nameuse{c@#1}%
+      \advance\@tempcnta-\c@memfbvline
+      \divide\@tempcnta \linemodnum
+      \multiply\@tempcnta \linemodnum
+      \advance\@tempcnta \c@memfbvline
+      \ifnum\@tempcnta=\@nameuse{c@#1}\@nameuse{the#1}\fi
+    \fi
+  \fi}
+
+%    \end{macrocode}
+% \end{macro}
+% 
+% \begin{macro}{\theb@vlinenumber}
+% \changes{v4.9}{2007/09/05}{Changed \cs{theb@vlinenumber} to use \cs{getthebvlinenumber}}
+%    \begin{macrocode}
+\renewcommand*{\theb@vlinenumber}{\getthebvlinenumber{bvlinectr}}
+
+%    \end{macrocode}
+% \end{macro}
+%
+% \subsection{Input files into tabulars, and etex}
+%
+%     M.J. Williams (CTT \textit{\cs{noalign} problem with \cs{input} and 
+% tabular in memoir class}, 28 Aug 2007) reported that using \cs{input} in a 
+% tabular resulted in errors. His example was:
+% \begin{verbatim}
+% ...
+% \begin{tabular}{c|c} \hline
+% 1 & 2 \\ \hline
+% \input{data} \hline
+% 5 & 6 \\ \hline
+% \end{tabular}
+% \end{verbatim}
+% where \texttt{data.tex} contains the single line (and no newline) \\
+% \verb?3 & 4 \\?
+%
+% Morten H{\o}gholm noted that the problem
+% was caused by \Lpack{memoir}'s extension to \cs{input}
+% and gave a solution that depends on processing via 
+% \texttt{etex} rather than \texttt{tex}.
+%
+% \begin{macro}{\ifetex}
+% \begin{macro}{\etextrue}
+% \begin{macro}{\etexfalse}
+% Check if \texttt{etex} is being used. This is based on the check for 
+% \texttt{pdf(latex)}.
+%    \begin{macrocode}
+%%% \ifetex is TRUE if etex is used instead of tex as the basis.
+\newif\ifetex
+  \etexfalse
+\ifx\eTeXversion\@undefined\else
+  \ifx\eTeXversion\relax\else
+    \ifnum\eTeXversion>0\relax
+      \etextrue
+    \fi
+  \fi
+\fi
+
+%    \end{macrocode}
+% \end{macro}
+% \end{macro}
+% \end{macro}
+%
+% Here's Morten's fix. Quoting, in part:
+% \begin{quotation}
+%     \Lpack{memoir} extends the file loading mechanism by providing 
+% \cs{AtBeginFile} and \cs{AtEndFile} whose arguments are executed as 
+% the names indicate. \ldots after inputting a file the storage bins are 
+% emptied. The problem [in your case] is that this emptying is an
+% assignment and so starts a new tabular cell and \cs{hline} is only
+% allowed after \verb?\\? or other \cs{hline}s.
+%
+% \ldots the tabular environment wraps each tabular cell in additional
+% groups so one can do an explicit test for which type of group we are in.
+% If tested to be in an align group \emph{and} in vertical mode it means
+% TeX hasn't found something to start a new cell and
+% then \cs{noalign} can be used.
+% \end{quotation}
+%
+%    \begin{macrocode}
+\ifetex
+  \renewcommand*{\killm@matf}[1]{%
+    \ifnum 6=\currentgrouptype
+      \ifvmode
+        \expandafter\expandafter\expandafter\@firstoftwo
+        \expandafter\expandafter\expandafter\noalign
+      \fi
+    \fi
+    \@firstofone
+    {\@namelet{#1-m@mfb}\relax
+     \@namelet{#1-m@mfe}\relax
+    }%
+  }
+\fi
+
+%    \end{macrocode}
+%
+% \subsection{Interaction with the \Lpack{float} package}
+%
+% The \Lpack{float} package also defines \cs{newfloat}. 
+%
+% \begin{macro}{\newfloat}
+% Kill \cs{newfloat} if the \Lpack{float} package is loaded.
+% \changes{v4.9}{2007/09/14}{Kill \cs{newfloat} if float package is loaded}
+%    \begin{macrocode}
+%%% kill \newfloat if the float package is used.
+\AtBeginPackage{float}{\let\newfloat\relax}
+
+%    \end{macrocode}
+% \end{macro}
+%
+% \subsection{Interaction with the \Lpack{caption} package}
+%
+% Kill changes to the caption macros if the \Lpack{caption} package is used.
+% The \Lpack{caption} package checks the definitions of the \cs{@makecaption},
+% \cs{caption} and \cs{@caption} macros. These need to be identical to the
+% definitions in the standard classes for the package to disbelieve that
+% the \Lpack{memoir} class is being used.
+%
+% \begin{macro}{\@makecaption}
+% \begin{macro}{\caption}
+% \begin{macro}{\@caption}
+% \changes{v4.9}{2007/11/14}{Revert caption macros for the caption package}
+%    \begin{macrocode}
+%%% revert changes to captioning macros if the caption package is used.
+\AtBeginPackage{caption}{
+\ClassWarningNoLine{memoir}{%
+  You are using the caption package with the memoir \MessageBreak 
+  class. This may cause unexpected or inconsistent \MessageBreak
+  results if you use memoir's captioning facilities}
+
+\long\def\@makecaption##1##2{%
+  \vskip\abovecaptionskip
+  \sbox\@tempboxa{##1: ##2}%
+  \ifdim \wd\@tempboxa >\hsize
+    ##1: ##2\par
+  \else
+    \global \@minipagefalse
+    \hb@xt@\hsize{\hfil\box\@tempboxa\hfil}%
+  \fi
+  \vskip\belowcaptionskip}
+
+\def\caption{%
+   \ifx\@captype\@undefined
+     \@latex@error{\noexpand\caption outside float}\@ehd
+     \expandafter\@gobble
+   \else
+     \refstepcounter\@captype
+     \expandafter\@firstofone
+   \fi
+   {\@dblarg{\@caption\@captype}}
+}
+
+\long\def\@caption##1[##2]##3{%
+  \par
+  \addcontentsline{\csname ext@##1\endcsname}{##1}%
+    {\protect\numberline{\csname the##1\endcsname}{\ignorespaces ##2}}%
+  \begingroup
+    \@parboxrestore
+    \if@minipage
+      \@setminipage
+    \fi
+    \normalsize
+    \@makecaption{\csname fnum@##1\endcsname}{\ignorespaces ##3}\par
+  \endgroup}
+}
+
+%    \end{macrocode}
+% \end{macro}
+% \end{macro}
+% \end{macro}
+%
+% \subsection{XeTeX}
+%
+%  Having supplied an \cs{ifpdf} to check if pdfLaTeX is being used,
+% here's one for XeTeX.
+%
+% \begin{macro}{\ifxetex}
+% Checks if XeTeX is being used.
+% \changes{v4.9}{2007/11/14}{Added \cs{ifxetex}}
+%    \begin{macrocode}
+%%% Use this to check if XeTeX is being used.
+\newif\ifxetex
+\expandafter\ifx\csname XeTeXrevision\endcsname\relax
+  \xetexfalse
+\else
+  \xetextrue
+\fi
+
+%    \end{macrocode}
+% \end{macro}
+%
+% \subsection{For package documentation}
+%
+% Some macros that may be useful for documenting LaTeX code. These
+% have principally come from \texttt{doc.dtx}.
+%
+% \begin{macro}{\bs}
+% Prints \verb?\?
+%    \begin{macrocode}
+\def\bs{\texttt{\char`\\}}
+%    \end{macrocode}
+% \end{macro} 
+%
+% \begin{macro}{\l@nohyphenation}
+% \begin{macro}{\meta}
+% \begin{macro}{\meta@font@select}
+% From \texttt{doc.dtx} \\
+% \cs{meta}\marg{arg} prints \meta{arg}.
+%    \begin{macrocode}
+\ifx\l@nohyphenation\undefined
+  \newlanguage\l@nohyphenation
+\fi
+\DeclareRobustCommand{\meta}[1]{%
+  \ensuremath\langle
+  \ifmmode \expandafter \nfss@text \fi
+  {%
+    \meta@font@select
+    \edef\meta@hyphen@restore
+      {\hyphenchar\the\font\the\hyphenchar\font}%
+    \hyphenchar\font\m@ne
+    \language\l@nohyphenation
+    #1\/%
+    \meta@hyphen@restore
+  }\ensuremath\rangle
+}
+\def\meta@font@select{\itshape}
+
+%    \end{macrocode}
+% \end{macro} 
+% \end{macro} 
+% \end{macro} 
+%
+% \begin{macro}{\marg}
+% \begin{macro}{\oarg}
+% \begin{macro}{\parg}
+% Robust versions of the \texttt{doc.dtx} macros. \\
+% \cs{marg}\marg{arg} prints \marg{arg} \\
+% \cs{oarg}\marg{arg} prints \oarg{arg} \\
+% \cs{parg}\marg{arg} prints \parg{arg} \\
+%    \begin{macrocode}
+\DeclareRobustCommand{\marg}[1]{%
+  {\ttfamily\char`\{}\meta{#1}{\ttfamily\char`\}}}
+\DeclareRobustCommand{\oarg}[1]{%
+  {\ttfamily\char`\[}\meta{#1}{\ttfamily\char`\]}}
+\DeclareRobustCommand{\parg}[1]{%
+  {\ttfamily\char`\(}\meta{#1}{\ttfamily\char`\)}}
+%    \end{macrocode}
+% \end{macro} 
+% \end{macro} 
+% \end{macro} 
+%
+% \begin{macro}{\cs}
+% \verb?\cs{arg}? prints \cs{arg}.
+%    \begin{macrocode}
+\DeclareRobustCommand{\cs}[1]{\texttt{\char`\\#1}}
+%    \end{macrocode}
+% \end{macro} 
+%
+% \begin{macro}{\cmd}
+% \verb?\cmd{\fred}? prints \cmd{\fred}.
+%    \begin{macrocode}
+%%%%\providecommand*{\cmd}[1]{\cs{\expandafter\cmd@to@cs\string#1}}
+%%%%  \def\cmd@to@cs#1#2{\char\number`#2\relax}
+%    \end{macrocode}
+% \end{macro} 
+%
+% \begin{macro}{\cmdprint}
+% \begin{macro}{\cmdpx}
+% From Heiko Oberdiek CTT 2001/05/26 (print and index a command) \\
+% \verb?\cmdprint{\fred}? prints \verb?\fred? \\
+% \verb?\cmd{\fred}? prints and indexes \verb?\fred?. NOTE It assumes that
+% \verb!?! is the `actual' character for MakeIndex (it is normally \verb!@!
+% but that is not much use if a command includes \verb!@! as part of its name).
+%    \begin{macrocode}
+\newcommand{\cmdprint}[1]{\texttt{\string#1}}
+\newcommand{\cmd}[1]{\cmdprint{#1}%
+  \index{\expandafter\@gobble\string#1?\string\cmdprint{\string#1}}}
+
+%    \end{macrocode}
+% \end{macro} 
+% \end{macro} 
+%
+% \subsection{Copying pagestyles}
+%
+% I missed some of the pagestyle elements in the original \cs{copypagestyle}.
+% (Problem discovered by Erik Quaeghebeur on 2007/11/27 CTT)
+%
+% \begin{macro}{\copypagestyle}
+% \changes{v4.9}{2007/11/28}{Added missing elements to \cs{copypagestyle}}
+%    \begin{macrocode}
+\renewcommand*{\copypagestyle}[2]{%
+  \makepagestyle{#1}%
+  \makeevenhead{#1}{\@nameuse{#2eheadl}}%
+    {\@nameuse{#2eheadc}}{\@nameuse{#2eheadr}}%
+  \makeoddhead{#1}{\@nameuse{#2oheadl}}%
+    {\@nameuse{#2oheadc}}{\@nameuse{#2oheadr}}%
+  \makeevenfoot{#1}{\@nameuse{#2efootl}}%
+    {\@nameuse{#2efootc}}{\@nameuse{#2efootr}}%
+  \makeoddfoot{#1}{\@nameuse{#2ofootl}}%
+    {\@nameuse{#2ofootc}}{\@nameuse{#2ofootr}}%
+  \makerunningwidth{#1}{\@nameuse{#2runwidth}}%
+%%%% corrected these elements
+  \@namedef{#1evenhpl}{\@nameuse{#2evenhpl}}%
+  \@namedef{#1oddhpl}{\@nameuse{#2oddhpl}}%
+  \@namedef{#1evenhpr}{\@nameuse{#2evenhpr}}%
+  \@namedef{#1oddhpr}{\@nameuse{#2oddhpr}}%
+%%%% added these elements
+  \@namedef{#1evenfpl}{\@nameuse{#2evenfpl}}%
+  \@namedef{#1oddfpl}{\@nameuse{#2oddfpl}}%
+  \@namedef{#1evenfpr}{\@nameuse{#2evenfpr}}%
+  \@namedef{#1oddfpr}{\@nameuse{#2oddfpr}}%
+%%%% back to the original
+  \@namedef{#1headrule}{\@nameuse{#2headrule}}%
+  \@namedef{#1footrule}{\@nameuse{#2footrule}}%
+  \makepsmarks{#1}{\@nameuse{#2pshook}}%
+}
+
+%    \end{macrocode}
+% \end{macro}
+%
+% \subsection{The extra font sizes}
+%
+% With Metafont fonts you can't effectively specify any font sizes other
+% than Knuth's, but with outline fonts you can as they can be scaled on the 
+% fly. Here's and extension to enable these to be used.
+%
+% \begin{macro}{\@ivpt}
+% \begin{macro}{\@xxxvivpt}
+% \begin{macro}{\@xviiilpt}
+% \begin{macro}{\@lxpt}
+% \begin{macro}{\@lxxiipt}
+% Macros for font sizes --- extensions to the kernel ones.
+%    \begin{macrocode}
+\newcommand*{\@ivpt}{4}
+\newcommand*{\@xxxvipt}{36}
+\newcommand*{\@xviiilpt}{48}
+\newcommand*{\@lxpt}{60}
+\newcommand*{\@lxxiipt}{72}
+
+%    \end{macrocode}
+% \end{macro}
+% \end{macro}
+% \end{macro}
+% \end{macro}
+% \end{macro}
+%
+% \begin{macro}{\extendedfontsizes}
+% \begin{macro}{\LARGE}
+% \begin{macro}{\huge}
+% \begin{macro}{\Huge}
+% \begin{macro}{\HUGE}
+% \begin{macro}{\miniscule}
+% Makes all font sizes, from \cs{miniscule} to \cs{HUGE} unique.
+%    \begin{macrocode}
+\newcommand*{\extendedfontsizes}{%
+\ifcase\@ptsize   % 0=10pt
+  \or             % 11pt
+    \renewcommand*{\HUGE}{\@setfontsize\HUGE\@xxxvipt{48}}
+  \or             % 12pt
+    \renewcommand*{\Huge}{\@setfontsize\Huge\@xxxvipt{48}}
+    \renewcommand*{\HUGE}{\@setfontsize\HUGE\@xviiilpt{60}}
+  \or \or         % 14pt
+    \renewcommand*{\huge}{\@setfontsize\huge\@xxxvipt{48}}
+    \renewcommand*{\Huge}{\@setfontsize\Huge\@xviiilpt{60}}
+    \renewcommand*{\HUGE}{\@setfontsize\HUGE\@lxpt{72}}
+  \or \or \or     % 17pt
+    \renewcommand*{\LARGE}{\@setfontsize\LARGE\@xxxvipt{44}}
+    \renewcommand*{\huge}{\@setfontsize\huge\@xviiilpt{60}}
+    \renewcommand*{\Huge}{\@setfontsize\Huge\@lxpt{72}}
+%    \renewcommand*{\HUGE}{\@setfontsize\HUGE\@lxxiipt{96}}
+    \renewcommand*{\HUGE}{\@setfontsize\HUGE\@lxxiipt{90}}
+  \or \or         % 9pt
+    \renewcommand*{\miniscule}{\@setfontsize\miniscule\@ivpt{5}}
+\fi}
+
+%    \end{macrocode}
+% \end{macro}
+% \end{macro}
+% \end{macro}
+% \end{macro}
+% \end{macro}
+% \end{macro}
+%
+% \subsection{Frontmatter amd mainmatter}
+%
+% If \cs{frontmatter} and \cs{mainmatter} are used with the article option,
+% then a page numbering / margin problem can occur if the frontmatter ends
+% on an odd page --- the first mainmatter next page is odd as well which throws
+% puts two odd-margined pages together.
+%
+% One fix from Morten is to always \cs{cleardoublepage} for twosided articles.
+%
+% One fix from me is for the ...matter macros to just switch on/off section
+% numbering.
+%
+% Morten's is simpler to implement.
+%
+% \begin{macro}{\@smemmain}
+% \changes{v4.9}{2007/12/07}{Changed clear pages in \cs{@smemmain}}
+%    \begin{macrocode}
+\renewcommand*{\@smemmain}{%
+  \@mainmattertrue
+  \setcounter{secnumdepth}{\value{maxsecnumdepth}}
+  \ifartopt
+    \if@twoside
+      \cleardoublepage
+    \else
+      \clearpage
+    \fi
+  \else
+    \cleardoublepage
+    \counterwithin{figure}{chapter}
+    \counterwithin{table}{chapter}
+  \fi}
+
+%    \end{macrocode}
+% \end{macro}
+%
+% \subsection{ToC hooks}
+%
+%  This is a generalisation of a suggestion by Lars Madsen (private email,
+% 2007/12/14).
+%
+% \begin{macro}{\cftinsert}
+% \begin{macro}{\cftinsertcode}
+% \begin{macro}{\cftinserthook}
+% \changes{v4.9}{2007/12/14}{Added \cs{cftinsert} and friends}
+%    \begin{macrocode}
+%%%
+%%% Following code suggested by Lars Madsen
+%%% Command inserted in a `List of' holding a hook for extra code
+\newcommand*{\cftinsert}[1]{\@nameuse{cftinsert#1}}
+%%% Create a hook to be executed in a `List of'. Since we use \@nameuse
+%%% it does not matter if the hook does not exist
+\newcommand{\cftinsertcode}[2]{\@namedef{cftinsert#1}{#2}}
+%%% Insert a hook into the `List of' file
+\newcommand*{\cftinserthook}[2]{%
+  \addtocontents{#1}{\protect\cftinsert\protect{#1\protect}}}
+%%%
+%%% Use like this:
+%%% \cftinsertcode{A}{%
+%%%    \renewcommand*{\cftchapterfont}{\normalfont\scshape}
+%%%    ...
+%%%    }
+%%% \cftinsertcode{F}{...}
+%%% \cftinsertcode{G}{...}
+%%%    ...
+%%% \frontmatter
+%%% \tableofcontents
+%%% \cftinserthook{lof}{G}
+%%% \listoffigures
+%%% \chapter{...}
+%%% ...
+%%% \mainmatter
+%%% \cftinserthook{lof}{F}
+%%% \cftinserthook{toc}{A}
+%%% \chapter{...}
+%%%
+
+%    \end{macrocode}
+% \end{macro}
+% \end{macro}
+% \end{macro}
+%
+% \subsection{Setting the ToC depth}
+%
+% \begin{macro}{\toclevel@part}
+% \begin{macro}{\toclevel@chapter}
+% Somehow I missed these out much earlier.
+% \changes{v4.9}{2007/12/14}{Added \cs{toclevel@part} and \cs{toclevel@chapter}}
+%    \begin{macrocode}
+\newcommand*{\toclevel@part}{-1}
+\newcommand*{\toclevel@chapter}{0}
+
+%    \end{macrocode}
+% \end{macro}
+% \end{macro}
+%
+% The end of the patch file.
 %
 %    \begin{macrocode}
 %</patch>
diff --git a/Master/texmf-dist/tex/latex/memoir/mempatch.sty b/Master/texmf-dist/tex/latex/memoir/mempatch.sty
index c4b1916fd05..a3e4594b2d3 100644
--- a/Master/texmf-dist/tex/latex/memoir/mempatch.sty
+++ b/Master/texmf-dist/tex/latex/memoir/mempatch.sty
@@ -22,7 +22,7 @@
 %% 
 %%   This work consists of the files listed in the README file.
 %% 
-\ProvidesFile{mempatch.sty}[2007/01/22 v4.8 Patches for memoir class v1.618]
+\ProvidesFile{mempatch.sty}[2007/12/14 v4.9 Patches for memoir class v1.618]
 
 %%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%
 %%%   Version 4.0 was released simultaneously with version 1.618 of memoir.
@@ -49,6 +49,11 @@
 %%%   Version 4.7 fixes tiny bugs introduced in version 4.6
 %%%
 %%%   Version 4.8 fixes some more little bugs.
+%%%
+%%%   Version 4.9 fixes yet more bugs. It also provides means of formatting
+%%% page numbers in the ToC, etc., and improved control over line numbering
+%%% for verses and boxed verbatims.
+%%%
 %%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%
 
 %%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%
@@ -581,6 +586,8 @@
 \aliaspagestyle{book}{empty}
 \aliaspagestyle{afterbook}{empty}
 
+\renewcommand{\midpartskip}{\par\vskip 2\onelineskip}
+
 %%% The \book (and \book*) document division is one level higher than
 %%% a \cs{part}. It has the same kind of controls over its appearance in
 %%% the body of the document and in the ToC as \part has.
@@ -595,7 +602,7 @@
 \newcommand*{\toclevel@book}{-2}
 
 \newcommand*{\beforebookskip}{\null\vfil}
-\newcommand*{\midbookskip}{\par \vskip 2\baselineskip}
+\newcommand*{\midbookskip}{\par \vskip 2\onelineskip}
 \newcommand*{\afterbookskip}{\vfil\newpage}
 
 \newcommand*{\@setupbook}{%
@@ -622,8 +629,8 @@
 \newcommand*{\printbooknum}{\booknumfont \thebook}
 \newcommand{\printbooktitle}[1]{\booktitlefont #1}
 
-\newcommand*{\membookinfo}[3]{}
-\newcommand*{\membookstarinfo}[1]{}
+\newcommand{\membookinfo}[3]{}
+\newcommand{\membookstarinfo}[1]{}
 
 \long\def\@book[#1]#2{%
   \M@gettitle{#1}%
@@ -725,8 +732,11 @@
 \newcommand{\cftbookafterpnum}{}
 \newcommand{\cftbookfillnum}[1]{%
   {\cftbookleader}%
-  {\hb@xt@\@pnumwidth{\hss {\cftbookpagefont #1}}}%
+%%%%  {\hb@xt@\@pnumwidth{\hss {\cftbookpagefont #1}}}%
+  \cftbookformatpnum{#1}%
   \cftbookafterpnum\par}
+\newcommand{\cftbookformatpnum}[1]{%
+  \hb@xt@\@pnumwidth{\hss {\cftbookpagefont #1}}}
 
 \renewcommand*{\@setclcnt}[2]{%
   \@tempswafalse
@@ -844,7 +854,7 @@
   \fi
   \if@tempswa
     \@ifundefined{toclevel@#1}{%
-      @memwarn{Unknown toclevel for #1}%
+      \@memwarn{Unknown toclevel for #1}%
     }{%
       \setcounter{tocdepth}{\@nameuse{toclevel@#1}}%
     }
@@ -1026,6 +1036,7 @@
     \fi
     \setbox0=\vtop to 0pt{%
       \begin{minipage}[t]{\marginparwidth}%
+        \normalfont\normalsize
         \ifoddpage #2\else #1\fi%
       \end{minipage}%
       \vss}%
@@ -1258,10 +1269,12 @@
   \@namedef{cft#2pagefont}{\normalfont}
   \@namedef{cft#2afterpnum}{}
   \@namedef{cft#2toclevel@#2}{#4}
+  \@namedef{cft#2formatpnum}##1{%
+    \hb@xt@\@pnumwidth{\hfil\@nameuse{cft#2pagefont}##1}}
   \@namedef{cft#2fillnum}##1{%
     {\@nameuse{cft#2leader}}\nobreak
-    \hb@xt@\@pnumwidth{%
-      \hfil\@nameuse{cft#2pagefont}##1}\@nameuse{cft#2afterpnum}\par}
+    \@nameuse{cft#2formatpnum}{##1}%
+    \@nameuse{cft#2afterpnum}\par}
 }% end of \newlistentry
 
 \let\cftbeforesectionskip\relax
@@ -1301,6 +1314,23 @@
 \newlistentry[chapter]{table}{lot}{0}
   \cftsetindents{table}{0em}{2.3em}
 
+\newcommand{\cftpartformatpnum}[1]{%
+  \hb@xt@\@pnumwidth{\hss {\cftpartpagefont #1}}}
+\renewcommand{\cftpartfillnum}[1]{%
+  {\cftpartleader}{\cftpartformatpnum{#1}}%
+  \cftpartafterpnum\par}
+\newcommand{\cftchapterformatpnum}[1]{%
+  \hb@xt@\@pnumwidth{\hfil{\cftchapterpagefont #1}}}
+\renewcommand{\cftchapterfillnum}[1]{%
+  {\cftchapterleader}\nobreak\cftchapterformatpnum{#1}%
+  \cftchapterafterpnum\par}
+
+\DeclareRobustCommand{\cftpagenumberson}[1]{%
+  \@namedef{cft#1fillnum}##1{%
+    \@nameuse{cft#1leader}\nobreak
+    \@nameuse{cft#1formatpnum}{##1}%
+    \@nameuse{cft#1afterpnum}\par}}
+
 \renewcommand*{\setrectanglesize}[3]{%
   \nametest{#1}{*}%
   \ifsamename                           % H = *
@@ -1474,18 +1504,25 @@
   \@memznegtest{\stockwidth}
   \@memznegtest{\paperwidth}
   \@memznegtest{\textwidth}
-  \@memznegtest{\spinemargin}
-  \@memznegtest{\foremargin}
+%%%  \@memznegtest{\spinemargin}
+  \@memnegtest{\spinemargin}
+%%%  \@memznegtest{\foremargin}
+  \@memnegtest{\foremargin}
   \@memznegtest{\marginparsep}
   \@memznegtest{\marginparwidth}
   \@memznegtest{\stockheight}
   \@memznegtest{\paperheight}
   \@memznegtest{\textheight}
-  \@memznegtest{\uppermargin}
-  \@memznegtest{\lowermargin}
-  \@memznegtest{\headheight}
-  \@memznegtest{\headsep}
-  \@memznegtest{\footskip}
+%%%  \@memznegtest{\uppermargin}
+  \@memnegtest{\uppermargin}
+%%%  \@memznegtest{\lowermargin}
+  \@memnegtest{\lowermargin}
+%%%  \@memznegtest{\headheight}
+  \@memnegtest{\headheight}
+%%%  \@memznegtest{\headsep}
+  \@memnegtest{\headsep}
+%%%  \@memznegtest{\footskip}
+  \@memnegtest{\footskip}
   \nametest{#1}{classic}%
   \ifsamename
     \m@mclassicht
@@ -1628,7 +1665,7 @@
   \parsepii = 0.1667\onelineskip \@plus \p@ \@minus \p@
   \topsepii = \parsepi
   \topsepiii = \parsepii
-  \everylistparindent \z@}
+  \everylistparindent \listparindent}
 \defaultlists
 
 \newcommand*{\firmlists}{%
@@ -1642,7 +1679,7 @@
   \parsepii = 0.0833\onelineskip \@plus \p@ \@minus \p@
   \topsepii = \parsepi
   \topsepiii = \parsepii
-  \everylistparindent\z@}
+  \everylistparindent\listparindent}
 
 \newcommand*{\m@mfirmlists}{
   \setlength{\partopsep}{0.1\onelineskip \@plus 0.05\onelineskip
@@ -1653,7 +1690,7 @@
   \parsepii = 0.0833\onelineskip \@plus \p@ \@minus \p@
   \topsepii = \parsepi
   \topsepiii = \parsepii
-  \everylistparindent\z@}
+  \everylistparindent\listparindent}
 
 \renewcommand*{\tightlists}{%
   \@ifstar{\m@mstightlists}{\m@mtightlists}}
@@ -2562,25 +2599,31 @@
   \makeevenfoot{plain}{}{\thepage}{}
   \makeoddfoot{plain}{}{\thepage}{}
 
+\newcommand*{\nouppercaseheads}{%
+  \let\memUChead\relax}
+\newcommand*{\uppercaseheads}{%
+  \let\memUChead\MakeUppercase}
+\uppercaseheads
+
 \if@twoside
   \makepagestyle{headings}
     \makepsmarks{headings}{%
-      \let\@mkboth\markboth
+%%%      \let\@mkboth\markboth
       \def\chaptermark##1{%
-        \markboth{\MakeUppercase{%
+        \markboth{\memUChead{%
           \ifnum \c@secnumdepth >\m@ne
             \if@mainmatter
               \@chapapp\ \thechapter. \ %
             \fi
           \fi
           ##1}}{}}%
-      \def\tocmark{\markboth{\MakeUppercase{\contentsname}}{}}%
-      \def\lofmark{\markboth{\MakeUppercase{\listfigurename}}{}}%
-      \def\lotmark{\markboth{\MakeUppercase{\listtablename}}{}}%
-      \def\bibmark{\markboth{\MakeUppercase{\bibname}}{}}%
-      \def\indexmark{\markboth{\MakeUppercase{\indexname}}{}}%
+      \def\tocmark{\markboth{\memUChead{\contentsname}}{\memUChead{\contentsname}}}%
+      \def\lofmark{\markboth{\memUChead{\listfigurename}}{\memUChead{\listfigurename}}}%
+      \def\lotmark{\markboth{\memUChead{\listtablename}}{\memUChead{\listtablename}}}%
+      \def\bibmark{\markboth{\memUChead{\bibname}}{\memUChead{\bibname}}}%
+      \def\indexmark{\markboth{\memUChead{\indexname}}{\memUChead{\indexname}}}%
       \def\sectionmark##1{%
-        \markright{\MakeUppercase{%
+        \markright{\memUChead{%
           \ifnum \c@secnumdepth > \z@
             \thesection. \ %
           \fi
@@ -2591,27 +2634,27 @@
 \else
   \makepagestyle{headings}
     \makepsmarks{headings}{%
-      \let\@mkboth\markboth
+%%%      \let\@mkboth\markboth
       \def\chaptermark##1{%
-        \markright{\MakeUppercase{%
+        \markright{\memUChead{%
           \ifnum \c@secnumdepth >\m@ne
             \if@mainmatter
               \@chapapp\ \thechapter. \ %
             \fi
           \fi
           ##1}}}%
-      \def\tocmark{\markright{\MakeUppercase{\contentsname}}}%
-      \def\lofmark{\markright{\MakeUppercase{\listfigurename}}}%
-      \def\lotmark{\markright{\MakeUppercase{\listtablename}}}%
-      \def\bibmark{\markright{\MakeUppercase{\bibname}}}%
-      \def\indexmark{\markright{\MakeUppercase{\indexname}}}%
+      \def\tocmark{\markright{\memUChead{\contentsname}}}%
+      \def\lofmark{\markright{\memUChead{\listfigurename}}}%
+      \def\lotmark{\markright{\memUChead{\listtablename}}}%
+      \def\bibmark{\markright{\memUChead{\bibname}}}%
+      \def\indexmark{\markright{\memUChead{\indexname}}}%
     }
     \makeoddhead{headings}{\slshape\rightmark}{}{\thepage}
 \fi
 
 \makepagestyle{myheadings}
   \makepsmarks{myheadings}{%
-    \let\@mkboth\@gobbletwo
+%%%    \let\@mkboth\@gobbletwo
     \let\chaptermark\@gobble
     \let\sectionmark\@gobble
     \def\tocmark{}%
@@ -2636,7 +2679,7 @@
 \makeoddfoot{ruled}{}{}{\thepage}
 \makeheadrule{ruled}{\textwidth}{\normalrulethickness}
 \renewcommand*{\@ruledmarks}{%
-  \let\@mkboth\markboth
+%%%  \let\@mkboth\markboth
   \def\chaptermark##1{%
     \markboth{%
       \ifnum \c@secnumdepth >\m@ne
@@ -2676,7 +2719,7 @@
 \makeheadrule{companion}{\headwidth}{\normalrulethickness}
 \makeheadposition{companion}{flushright}{flushleft}{}{}
 \makepsmarks{companion}{%
-  \let\@mkboth\markboth
+%%%  \let\@mkboth\markboth
   \def\chaptermark##1{\markboth{##1}{##1}}    % left mark & right marks
   \def\sectionmark##1{\markright{%
     \ifnum \c@secnumdepth>\z@
@@ -2779,6 +2822,7 @@
 
 %% Stefano Bianchi, ctt 2003/12/09 `New chapter style: chapter vs chapter*'
 \makechapterstyle{bianchi}{%
+  \chapterstyle{default}
   \renewcommand*{\chapnamefont}{\normalfont\Large\sffamily\itshape}
   \renewcommand*{\chapnumfont}{\normalfont\huge}
   \renewcommand*{\printchaptername}{%
@@ -2793,6 +2837,7 @@
     \vphantom{\chapnumfont \textit{9}}\afterchapternum}}
 
 \makechapterstyle{bringhurst}{%
+  \chapterstyle{default}
   \renewcommand*{\chapterheadstart}{}
   \renewcommand*{\printchaptername}{}
   \renewcommand*{\chapternamenum}{}
@@ -2804,10 +2849,12 @@
   \vskip\onelineskip \hrule\vskip\onelineskip}}
 
 \makechapterstyle{brotherton}{%
+  \chapterstyle{default}
   \renewcommand*{\printchapternum}{\chapnumfont
     \ifanappendix \thechapter \else \numtoName{\c@chapter}\fi}}
 
 \makechapterstyle{chappell}{%
+  \chapterstyle{default}
   \setlength{\beforechapskip}{0pt}
   \renewcommand*{\chapnamefont}{\large\centering}
   \renewcommand*{\chapnumfont}{\large}
@@ -2820,16 +2867,18 @@
     \hrule\vskip\onelineskip \centering\chaptitlefont ##1}}
 
 \makechapterstyle{culver}{%
+  \chapterstyle{default}
   \chapterstyle{article}%
-%%%  \renewcommand*{\thechapter}{\Roman{chapter}}
+  \renewcommand*{\thechapter}{\Roman{chapter}}
   \renewcommand*{\printchapternum}{% center number/title
-    \centering\chapnumfont \thechapter\space}%
+    \centering\chapnumfont \thechapter\space\space}%
   \renewcommand*{\printchapternonum}{\centering}
   \renewcommand*{\clearforchapter}{}% no new page
   \aliaspagestyle{chapter}{headings}% no special pagestyle
 }
 
 \makechapterstyle{dash}{%
+  \chapterstyle{default}
   \setlength{\beforechapskip}{5\onelineskip}
   \renewcommand*{\printchaptername}{}
   \renewcommand*{\chapternamenum}{}
@@ -2846,6 +2895,7 @@
   \setlength{\afterchapskip}{2.5\onelineskip}}
 
 \makechapterstyle{demo2}{%
+  \chapterstyle{default}
   \renewcommand*{\printchaptername}{\centering}
   \renewcommand*{\printchapternum}{\chapnumfont
      \ifanappendix \thechapter \else \numtoName{\c@chapter}\fi}
@@ -2861,7 +2911,27 @@
     \vskip\topskip}
   \setlength{\beforechapskip}{2\onelineskip}}
 
+\makechapterstyle{demo3}{%
+  \chapterstyle{default}
+  \renewcommand*{\printchaptername}{\centering}
+  \renewcommand*{\chapnumfont}{\normalfont\HUGE\itshape}
+  \renewcommand*{\printchapternum}{\chapnumfont
+     \ifanappendix \thechapter \else \numtoName{\c@chapter}\fi}
+  \renewcommand*{\chaptitlefont}{\normalfont\Huge\sffamily}
+  \renewcommand*{\printchaptertitle}[1]{%
+    \hrule\vskip\onelineskip \raggedleft \chaptitlefont ##1}
+  \renewcommand*{\afterchaptertitle}{%
+    \vskip\onelineskip \hrule\vskip \afterchapskip}
+  \setlength{\beforechapskip}{0pt}
+  \setlength{\midchapskip}{2\onelineskip}
+  \setlength{\afterchapskip}{2\onelineskip}
+  \renewcommand*{\printchapternonum}{%
+    \vphantom{\chapnumfont One}
+    \afterchapternum%
+    \vskip\topskip}}
+
 \makechapterstyle{ell}{%
+  \chapterstyle{default}
   \renewcommand*{\chapnumfont}{\normalfont\HUGE\sffamily}
   \renewcommand*{\chaptitlefont}{\normalfont\huge\sffamily}
   \settowidth{\chapindent}{\chapnumfont 111}
@@ -2885,6 +2955,7 @@
 
 %% Gerardo Garcia, ctt 2002/04/12, `Fancy Headings, Chapter Headings
 \makechapterstyle{ger}{%
+  \chapterstyle{default}
   \renewcommand*{\chapterheadstart}{\vspace*{\beforechapskip}
   \mbox{}\\\mbox{}\rule[0pt]{\textwidth}{0.4pt}\par}
   \setlength{\midchapskip}{20pt}
@@ -2892,6 +2963,7 @@
     \\\mbox{}\rule[5pt]{\textwidth}{0.4pt}}}
 
 \makechapterstyle{lyhne}{%  needs graphicx package
+  \chapterstyle{default}
   \setlength{\beforechapskip}{1.5cm}
   \setlength{\afterchapskip}{1cm}
   \setlength{\midchapskip}{2cm}
@@ -2908,6 +2980,7 @@
 %% posted to ctt, December 2003
 %%%% \usepackage{graphicx}
 \makechapterstyle{madsen}{%
+  \chapterstyle{default}
   \renewcommand*{\chapnamefont}{%
     \normalfont\Large\scshape\raggedleft}
   \renewcommand*{\chaptitlefont}{%
@@ -2925,6 +2998,7 @@
 \newcommand*{\colorchapnum}{}
 \newcommand*{\colorchaptitle}{}
 \makechapterstyle{pedersen}{%
+  \chapterstyle{default}
   \setlength{\beforechapskip}{-20pt}
   \setlength{\afterchapskip}{10pt}
   \renewcommand*{\chapnamefont}{\normalfont\LARGE\itshape}
@@ -2942,6 +3016,7 @@
 
 %% Thomas Dye's southall chapter style
 \makechapterstyle{southall}{%
+  \chapterstyle{default}
   \setlength{\afterchapskip}{5\baselineskip}
   \setlength{\beforechapskip}{36pt}%    \headindent
   \setlength{\midchapskip}{\textwidth}% \rightblock
@@ -2965,6 +3040,7 @@
     \hrulefill \par\nobreak\noindent \vskip \afterchapskip}}
 
 \makechapterstyle{thatcher}{%
+  \chapterstyle{default}
   \renewcommand*{\chapterheadstart}{}
   \renewcommand*{\printchaptername}{%
     \centerline{\chapnumfont{\@chapapp\ \thechapter}}}
@@ -2985,6 +3061,7 @@
 %% will not display accurately. It requires the graphicx package.
 %%%% \usepackage{graphicx}
 \makechapterstyle{veelo}{%
+  \chapterstyle{default}
    \setlength{\afterchapskip}{40pt}
   \renewcommand*{\chapterheadstart}{\vspace*{40pt}}
   \renewcommand*{\afterchapternum}{\par\nobreak\vskip 25pt}
@@ -3009,6 +3086,7 @@
    \makeoddfoot{plain}{}{}{\thepage}}
 
 \makechapterstyle{verville}{%
+  \chapterstyle{default}
   \setlength{\beforechapskip}{0pt}
   \renewcommand*{\printchaptername}{}
   \renewcommand*{\printchapternum}{%
@@ -3069,6 +3147,460 @@
     \fi
   \fi}
 
+%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%
+%%%% Version 4.9 (2007/05/02 and later)
+
+\renewcommand{\newfloat}[4][\@empty]{%
+%%%%  \@namedef{ftype@#2}{\value{newflo@tctr}}
+%%%%  \addtocounter{newflo@tctr}{\value{newflo@tctr}}
+  \expandafter\edef\csname ftype@#2\endcsname{\the\c@newflo@tctr}
+  \advance\c@newflo@tctr \c@newflo@tctr
+  \@ifundefined{c@#2}{% counter is not defined
+    \ifx \@empty#1\relax
+      \newcounter{#2}
+    \else
+      \newcounter{#2}[#1]
+      \expandafter\edef\csname the#2\endcsname{%
+  \expandafter\noexpand\csname the#1\endcsname.\noexpand\arabic{#2}}
+    \fi}{}
+  \setcounter{#2}{0}
+
+  \@namedef{ext@#2}{#3}  % file extension
+  \@ifundefined{c@#3depth}{\newcounter{#3depth}}{}
+  \setcounter{#3depth}{1}
+
+  \@namedef{fps@#2}{tbp}                     % position
+  \@namedef{fnum@#2}{#4~\@nameuse{the#2}}    % caption naming
+  \@namedef{fleg#2}{#4}                      % legend naming
+  \@namedef{flegtoc#2}##1{}                  % legend name in ToC
+
+  \newenvironment{#2}{\@float{#2}}{\end@float}
+  \newenvironment{#2*}{\@dblfloat{#2}}{\end@dblfloat}
+} % end \newfloat
+
+%%%% fix figure and table settings.
+\def\ftype@figure{1}
+\def\ftype@table{2}
+\setcounter{newflo@tctr}{4}
+
+\newcommand*{\@@m@mline}{\hb@xt@\linewidth}
+
+\renewcommand*{\setupboxverb@line}{%
+  \par
+  \ifbvperpage
+    \output=\expandafter{\expandafter\boxverb@split \the\output}
+  \fi
+  \def\verbatim@processline{\leavevmode
+    \b@vdocount%
+    \bvleftsidehook\vbox{\advance% \hsize-.8\p@% changed to \linewidth
+                         \linewidth-.8\p@
+                         \@@line
+      {\b@vdooutside\strut\kern\bvboxsep%
+       \b@vdoinside%
+       \ift@bs
+         \tabverbatim@processline
+       \else
+         \the\verbatim@line
+       \fi
+       \hss}%
+    \kern\bvboxsep}\bvrightsidehook\par}}
+\renewcommand*{\boxedverbatim}{\begingroup
+  \let\@@line\@@m@mline%%% new in v4.9
+  \setupboxverb@line
+  \@verbatim
+  \setupbox@verb
+  \verbatim@start}
+
+\renewcommand*{\bvtoprulehook}{\hrule width\linewidth \nobreak \vskip -0.1pt}
+\renewcommand*{\bvendrulehook}{\hrule width\linewidth}
+\renewcommand*{\bvendofpage}{\hrule width\linewidth\kern-0.4pt}
+
+\newdimen\prechapterprecisshift
+\ifartopt
+  \prechapterprecisshift=0pt
+\else
+  \prechapterprecisshift=-2\baselineskip
+\fi
+\newcommand*{\precisfont}{\normalfont\itshape}
+\renewcommand*{\prechapterprecis}{%
+  \vspace*{\prechapterprecisshift}%
+  \begin{quote}\precisfont}
+
+\newcommand*{\m@mopsidebar}{%
+  \ifvoid\sideins\else
+    \setbox\@outputbox \vbox{%
+      \sidecontents
+      \unvbox\@outputbox}
+  \fi}
+
+\gdef\mem@makecol{%
+  \m@m@makecolintro
+  \ifvoid\footins
+    \setbox\@outputbox \box\@cclv
+  \else
+    \setbox\@outputbox \vbox{%
+    \boxmaxdepth\@maxdepth
+    \@tempdima\dp\@cclv
+    \unvbox\@cclv
+    \vskip-\@tempdima
+    \vskip \skip\footins
+    \color@begingroup
+      \normalcolor
+      \footnoterule
+      \unvbox\footins
+    \color@endgroup
+    }
+  \fi
+  \m@mdoextrafeet
+  \m@m@makecolfloats
+  \m@mopsidebar
+  \m@m@makecoltext
+  \global\maxdepth \@maxdepth}
+
+\gdef\mem@makecolbf{%
+  \m@m@makecolintro
+  \setbox\@outputbox \box\@cclv
+  \m@m@makecolfloats
+  \m@mopsidebar
+  \ifvoid\footins
+  \else
+    \setbox\@outputbox \vbox{%
+    \boxmaxdepth\@maxdepth
+    \unvbox\@outputbox
+    \vskip \skip\footins
+    \color@begingroup
+      \normalcolor
+      \footnoterule
+      \unvbox\footins
+    \color@endgroup
+    }%
+  \fi
+  \m@m@makecoltext
+  \global\maxdepth \@maxdepth}
+
+\gdef\@reinserts{%
+  \ifvoid\footins\else\insert\footins{\unvbox\footins}\fi
+  \m@mdodoreinextrafeet
+  \ifvbox\@kludgeins\insert\@kludgeins{\unvbox\@kludgeins}\fi
+  \ifvoid\sideins\else\insert\sideins{\unvbox\sideins}\fi
+}
+
+\newcommand*{\setfloatlocations}[2]{\@namedef{fps@#1}{#2}}
+
+\renewcommand*{\setsecnumdepth}[1]{%
+  \ifx\@nodocument\relax%    after the preamble
+    \@setclcnt{#1}{secnumdepth}%
+  \else
+    \@setclcnt{#1}{secnumdepth}%
+    \@setclcnt{#1}{maxsecnumdepth}%
+  \fi}
+\setsecnumdepth{section}
+
+\renewcommand*{\addappheadtotoc}{%
+  \phantomsection\addcontentsline{toc}{chapter}{\appendixtocname}}
+
+\renewcommand{\memcaptioninfo}[4]{}
+\renewcommand{\memlegendinfo}[1]{}
+\renewcommand{\memnamedlegendinfo}[3]{}
+\renewcommand{\membitwonumcaptioninfo}[7]{}
+\renewcommand{\membionenumcaptioninfo}[7]{}
+\renewcommand{\membicaptioninfo}[6]{}
+
+\renewcommand{\mempartinfo}[3]{}
+\renewcommand{\mempartstarinfo}[1]{}
+\renewcommand{\memchapinfo}[4]{}
+\renewcommand{\memchapstarinfo}[2]{}
+\renewcommand{\memappchapinfo}[4]{}
+\renewcommand{\memappchapstarinfo}[2]{}
+\renewcommand{\memsecinfo}[5]{}
+\renewcommand{\memsecstarinfo}[2]{}
+
+\renewcommand{\mempoeminfo}[1]{}
+\renewcommand{\mempoemstarinfo}[1]{}
+\renewcommand{\memPoemTitleinfo}[4]{}
+\renewcommand{\memPoemTitlestarinfo}[2]{}
+
+\renewcommand{\memapppageinfo}[1]{}
+\renewcommand{\memapppagestarinfo}[1]{}
+\renewcommand{\memleadpageinfo}[3]{}
+\renewcommand{\memleadpagestarinfo}[2]{}
+
+\renewcommand*{\@vslnumright}{%
+  \hfill\rlap{\kern\vrightskip\kern\rightmargin%
+              \vlvnumfont\getthelinenumber{poemline}}}
+\renewcommand*{\@vslnumleft}{%
+  \hfill\rlap{\kern-\textwidth\kern-\vrightskip%
+              \vlvnumfont\getthelinenumber{poemline}}}
+
+\newcounter{memfvsline}
+  \c@memfvsline=\z@
+\newcommand*{\setverselinenums}[2]{%
+  \c@poemline #1\relax \advance\c@poemline \m@ne
+  \refstepcounter{poemline}%
+  \ifnum\z@<\linemodnum%   we are printing line numbers
+    \@tempcnta #2\relax
+    \divide\@tempcnta\linemodnum
+    \multiply\@tempcnta\linemodnum
+    \c@memfvsline #2\relax
+    \advance\c@memfvsline-\@tempcnta
+  \fi}
+\renewcommand*{\getthelinenumber}[1]{
+  \ifnum\@ne>\linemodnum% no line numbers
+  \else
+    \ifnum\@ne=\linemodnum% every line numbered
+      \@nameuse{the#1}%
+    \else
+      \@tempcnta=\@nameuse{c@#1}%
+      \advance\@tempcnta -\c@memfvsline
+      \divide\@tempcnta \linemodnum
+      \multiply\@tempcnta \linemodnum
+      \advance\@tempcnta \c@memfvsline
+      \ifnum\@tempcnta=\@nameuse{c@#1}\@nameuse{the#1}\fi
+    \fi
+  \fi}
+
+\newcounter{memfbvline}
+  \c@memfbvline=\z@
+\newcommand*{\setbvlinenums}[2]{%
+  \c@bvlinectr #1\relax \advance\c@bvlinectr \m@ne
+  \ifnum\z@<\linemodnum% we are printing lines
+    \@tempcnta #2\relax
+    \divide\@tempcnta\linemodnum
+    \multiply\@tempcnta\linemodnum
+    \c@memfbvline #2\relax
+    \advance\c@memfbvline-\@tempcnta
+  \fi}
+\newcommand*{\getthebvlinenumber}[1]{%
+  \ifnum\@ne>\linemodnum% no line numbers
+  \else
+    \ifnum\@ne=\linemodnum% every line numbered
+      \@nameuse{the#1}%
+    \else
+      \@tempcnta=\@nameuse{c@#1}%
+      \advance\@tempcnta-\c@memfbvline
+      \divide\@tempcnta \linemodnum
+      \multiply\@tempcnta \linemodnum
+      \advance\@tempcnta \c@memfbvline
+      \ifnum\@tempcnta=\@nameuse{c@#1}\@nameuse{the#1}\fi
+    \fi
+  \fi}
+
+\renewcommand*{\theb@vlinenumber}{\getthebvlinenumber{bvlinectr}}
+
+%%% \ifetex is TRUE if etex is used instead of tex as the basis.
+\newif\ifetex
+  \etexfalse
+\ifx\eTeXversion\@undefined\else
+  \ifx\eTeXversion\relax\else
+    \ifnum\eTeXversion>0\relax
+      \etextrue
+    \fi
+  \fi
+\fi
+
+\ifetex
+  \renewcommand*{\killm@matf}[1]{%
+    \ifnum 6=\currentgrouptype
+      \ifvmode
+        \expandafter\expandafter\expandafter\@firstoftwo
+        \expandafter\expandafter\expandafter\noalign
+      \fi
+    \fi
+    \@firstofone
+    {\@namelet{#1-m@mfb}\relax
+     \@namelet{#1-m@mfe}\relax
+    }%
+  }
+\fi
+
+%%% kill \newfloat if the float package is used.
+\AtBeginPackage{float}{\let\newfloat\relax}
+
+%%% revert changes to captioning macros if the caption package is used.
+\AtBeginPackage{caption}{
+\ClassWarningNoLine{memoir}{%
+  You are using the caption package with the memoir \MessageBreak
+  class. This may cause unexpected or inconsistent \MessageBreak
+  results if you use memoir's captioning facilities}
+
+\long\def\@makecaption##1##2{%
+  \vskip\abovecaptionskip
+  \sbox\@tempboxa{##1: ##2}%
+  \ifdim \wd\@tempboxa >\hsize
+    ##1: ##2\par
+  \else
+    \global \@minipagefalse
+    \hb@xt@\hsize{\hfil\box\@tempboxa\hfil}%
+  \fi
+  \vskip\belowcaptionskip}
+
+\def\caption{%
+   \ifx\@captype\@undefined
+     \@latex@error{\noexpand\caption outside float}\@ehd
+     \expandafter\@gobble
+   \else
+     \refstepcounter\@captype
+     \expandafter\@firstofone
+   \fi
+   {\@dblarg{\@caption\@captype}}
+}
+
+\long\def\@caption##1[##2]##3{%
+  \par
+  \addcontentsline{\csname ext@##1\endcsname}{##1}%
+    {\protect\numberline{\csname the##1\endcsname}{\ignorespaces ##2}}%
+  \begingroup
+    \@parboxrestore
+    \if@minipage
+      \@setminipage
+    \fi
+    \normalsize
+    \@makecaption{\csname fnum@##1\endcsname}{\ignorespaces ##3}\par
+  \endgroup}
+}
+
+%%% Use this to check if XeTeX is being used.
+\newif\ifxetex
+\expandafter\ifx\csname XeTeXrevision\endcsname\relax
+  \xetexfalse
+\else
+  \xetextrue
+\fi
+
+\def\bs{\texttt{\char`\\}}
+\ifx\l@nohyphenation\undefined
+  \newlanguage\l@nohyphenation
+\fi
+\DeclareRobustCommand{\meta}[1]{%
+  \ensuremath\langle
+  \ifmmode \expandafter \nfss@text \fi
+  {%
+    \meta@font@select
+    \edef\meta@hyphen@restore
+      {\hyphenchar\the\font\the\hyphenchar\font}%
+    \hyphenchar\font\m@ne
+    \language\l@nohyphenation
+    #1\/%
+    \meta@hyphen@restore
+  }\ensuremath\rangle
+}
+\def\meta@font@select{\itshape}
+
+\DeclareRobustCommand{\marg}[1]{%
+  {\ttfamily\char`\{}\meta{#1}{\ttfamily\char`\}}}
+\DeclareRobustCommand{\oarg}[1]{%
+  {\ttfamily\char`\[}\meta{#1}{\ttfamily\char`\]}}
+\DeclareRobustCommand{\parg}[1]{%
+  {\ttfamily\char`\(}\meta{#1}{\ttfamily\char`\)}}
+\DeclareRobustCommand{\cs}[1]{\texttt{\char`\\#1}}
+%%%%\providecommand*{\cmd}[1]{\cs{\expandafter\cmd@to@cs\string#1}}
+%%%%  \def\cmd@to@cs#1#2{\char\number`#2\relax}
+\newcommand{\cmdprint}[1]{\texttt{\string#1}}
+\newcommand{\cmd}[1]{\cmdprint{#1}%
+  \index{\expandafter\@gobble\string#1?\string\cmdprint{\string#1}}}
+
+\renewcommand*{\copypagestyle}[2]{%
+  \makepagestyle{#1}%
+  \makeevenhead{#1}{\@nameuse{#2eheadl}}%
+    {\@nameuse{#2eheadc}}{\@nameuse{#2eheadr}}%
+  \makeoddhead{#1}{\@nameuse{#2oheadl}}%
+    {\@nameuse{#2oheadc}}{\@nameuse{#2oheadr}}%
+  \makeevenfoot{#1}{\@nameuse{#2efootl}}%
+    {\@nameuse{#2efootc}}{\@nameuse{#2efootr}}%
+  \makeoddfoot{#1}{\@nameuse{#2ofootl}}%
+    {\@nameuse{#2ofootc}}{\@nameuse{#2ofootr}}%
+  \makerunningwidth{#1}{\@nameuse{#2runwidth}}%
+%%%% corrected these elements
+  \@namedef{#1evenhpl}{\@nameuse{#2evenhpl}}%
+  \@namedef{#1oddhpl}{\@nameuse{#2oddhpl}}%
+  \@namedef{#1evenhpr}{\@nameuse{#2evenhpr}}%
+  \@namedef{#1oddhpr}{\@nameuse{#2oddhpr}}%
+%%%% added these elements
+  \@namedef{#1evenfpl}{\@nameuse{#2evenfpl}}%
+  \@namedef{#1oddfpl}{\@nameuse{#2oddfpl}}%
+  \@namedef{#1evenfpr}{\@nameuse{#2evenfpr}}%
+  \@namedef{#1oddfpr}{\@nameuse{#2oddfpr}}%
+%%%% back to the original
+  \@namedef{#1headrule}{\@nameuse{#2headrule}}%
+  \@namedef{#1footrule}{\@nameuse{#2footrule}}%
+  \makepsmarks{#1}{\@nameuse{#2pshook}}%
+}
+
+\newcommand*{\@ivpt}{4}
+\newcommand*{\@xxxvipt}{36}
+\newcommand*{\@xviiilpt}{48}
+\newcommand*{\@lxpt}{60}
+\newcommand*{\@lxxiipt}{72}
+
+\newcommand*{\extendedfontsizes}{%
+\ifcase\@ptsize   % 0=10pt
+  \or             % 11pt
+    \renewcommand*{\HUGE}{\@setfontsize\HUGE\@xxxvipt{48}}
+  \or             % 12pt
+    \renewcommand*{\Huge}{\@setfontsize\Huge\@xxxvipt{48}}
+    \renewcommand*{\HUGE}{\@setfontsize\HUGE\@xviiilpt{60}}
+  \or \or         % 14pt
+    \renewcommand*{\huge}{\@setfontsize\huge\@xxxvipt{48}}
+    \renewcommand*{\Huge}{\@setfontsize\Huge\@xviiilpt{60}}
+    \renewcommand*{\HUGE}{\@setfontsize\HUGE\@lxpt{72}}
+  \or \or \or     % 17pt
+    \renewcommand*{\LARGE}{\@setfontsize\LARGE\@xxxvipt{44}}
+    \renewcommand*{\huge}{\@setfontsize\huge\@xviiilpt{60}}
+    \renewcommand*{\Huge}{\@setfontsize\Huge\@lxpt{72}}
+    \renewcommand*{\HUGE}{\@setfontsize\HUGE\@lxxiipt{90}}
+  \or \or         % 9pt
+    \renewcommand*{\miniscule}{\@setfontsize\miniscule\@ivpt{5}}
+\fi}
+
+\renewcommand*{\@smemmain}{%
+  \@mainmattertrue
+  \setcounter{secnumdepth}{\value{maxsecnumdepth}}
+  \ifartopt
+    \if@twoside
+      \cleardoublepage
+    \else
+      \clearpage
+    \fi
+  \else
+    \cleardoublepage
+    \counterwithin{figure}{chapter}
+    \counterwithin{table}{chapter}
+  \fi}
+
+%%%
+%%% Following code suggested by Lars Madsen
+%%% Command inserted in a `List of' holding a hook for extra code
+\newcommand*{\cftinsert}[1]{\@nameuse{cftinsert#1}}
+%%% Create a hook to be executed in a `List of'. Since we use \@nameuse
+%%% it does not matter if the hook does not exist
+\newcommand{\cftinsertcode}[2]{\@namedef{cftinsert#1}{#2}}
+%%% Insert a hook into the `List of' file
+\newcommand*{\cftinserthook}[2]{%
+  \addtocontents{#1}{\protect\cftinsert\protect{#1\protect}}}
+%%%
+%%% Use like this:
+%%% \cftinsertcode{A}{%
+%%%    \renewcommand*{\cftchapterfont}{\normalfont\scshape}
+%%%    ...
+%%%    }
+%%% \cftinsertcode{F}{...}
+%%% \cftinsertcode{G}{...}
+%%%    ...
+%%% \frontmatter
+%%% \tableofcontents
+%%% \cftinserthook{lof}{G}
+%%% \listoffigures
+%%% \chapter{...}
+%%% ...
+%%% \mainmatter
+%%% \cftinserthook{lof}{F}
+%%% \cftinserthook{toc}{A}
+%%% \chapter{...}
+%%%
+
+\newcommand*{\toclevel@part}{-1}
+\newcommand*{\toclevel@chapter}{0}
+
 \endinput
 %%
 %% End of file `mempatch.sty'.