re-add fltpage

git-svn-id: svn://tug.org/texlive/trunk@15457 c570f23f-e606-0410-a88d-b1316a301751

7 files changed, 997 insertions, 1 deletions

diff --git a/Master/texmf-dist/doc/latex/fltpage/fltpage.pdf b/Master/texmf-dist/doc/latex/fltpage/fltpage.pdf
new file mode 100644
index 00000000000..09710957a73
--- /dev/null
+++ b/Master/texmf-dist/doc/latex/fltpage/fltpage.pdf
diff --git a/Master/texmf-dist/source/latex/fltpage/fltpage.dtx b/Master/texmf-dist/source/latex/fltpage/fltpage.dtx
new file mode 100644
index 00000000000..a56fea64c2d
--- /dev/null
+++ b/Master/texmf-dist/source/latex/fltpage/fltpage.dtx
@@ -0,0 +1,722 @@
+% ^^A -----------------------------
+% \iffalse
+% File: fltpage.dtx
+%
+%  Copyright (C) [1998] by Sebastian Gross.  All rights reserved.
+% \fi
+% ^^A -----------------------------
+%
+% \iffalse
+% IMPORTANT NOTICE:
+%
+% This is a tool or better yet, an experiments written by Sebastian Gross
+% (seppel@zedat.fu-berlin.de), who is writing this not only for it utility
+% value, but as part of the process of learning LaTeX.  This utility is far
+% from perfect, and comments are welcome.
+%
+% The usual disclaimers apply:  If it doesn't work right that's your problem!
+%
+% The usual GNU-style conditions apply: If you change it, you take
+% the blame; if you pass it on, pass on all present conditions;
+%
+% For error reports in case of UNCHANGED versions see fltpage.ins
+% \fi
+%
+% ^^A -----------------------------
+% \CheckSum{309}
+%%
+%% \iffalse meta-comment
+%% ===================================================================
+%%  @LaTeX-package-file{
+%%     author     = {Sebastian Gross},
+%%     version    = {0.3},
+%%     date       = {13 Nov 1998},
+%%     filename   = {fltpage.dtx},
+%%     email      = {seppel@zedat.fu-berlin.de},
+%%     codetable  = {ISO/ASCII},
+%%     keywords   = {LaTeX2e, float, table, figure, caption, FPfigure, FPtable},
+%%     supported  = {yes},
+%%     docstring  = {LaTeX package which defines new environments to place
+%%                   captions of tables and figures on the facing/following page.}
+%%  }
+%% ===================================================================
+%% \fi
+%
+% ^^A -----------------------------
+%
+%  \def\fileversion{0.3}
+%  \def\filedate{1998/10/29}
+%  \newcommand{\docdate}{1998/11/13}
+%  \newcommand{\fp}{\textsf{fltpage}}
+%
+%  \newenvironment{options}[1]%
+%  {\begin{list}{}{\renewcommand{\makelabel}[1]{\texttt{##1}\hfil}%
+%     \settowidth{\labelwidth}{\texttt{#1\space}}%
+%     \setlength{\leftmargin}{\labelwidth}%
+%     \addtolength{\leftmargin}{\labelsep}%
+%     \setlength{\topsep}{0pt}%
+%     \setlength{\itemsep}{0pt}%
+%     \setlength{\parsep}{0pt}%
+%     \setlength{\partopsep}{0pt}}}%
+%  {\end{list}\vspace{4pt}}
+%  \setlength{\parskip}{4pt plus2pt minus1pt}
+%  \setlength{\parindent}{0pt}
+%  \newcommand*{\pkg}[1]{\textsf{#1}}
+%  \newcommand*{\cls}[1]{\textsf{#1}}
+%
+% ^^A -----------------------------
+%
+%  \changes{v0.3}{1998/10/29}{Added option noHints}
+%  \changes{v0.2}{1998/10/28}{Resolved the problem of accessible Variables}
+%  \changes{v0.1}{1998/10/07}{First private version}
+%
+%
+% \title{Welcome to the beta test of \fp\thanks{Sorry for the crippled name
+%        \fp! I just did not have a better and compelling idea.}\ ~package!}
+%  \author{Sebastian Gross\thanks{e-mail: \texttt{seppel@zedat.fu-berlin.de}.}}
+%  \date{beta \fileversion\ -- \docdate}
+%  \maketitle
+%
+% ^^A -----------------------------
+%
+%  \begin{abstract}
+%    This package defines the new environments |FPfigure| and |FPtable|,
+%    analogous to |figure| and |table|.  In |twoside| mode the caption will
+%    be set on the opposite page of a figure/table which needs a whole page.
+%    In |oneside| mode the caption will be set on the preceding or following
+%    page.
+%  \end{abstract}
+%
+%  \pagestyle{headings}
+%
+% ^^A -----------------------------
+%
+%  \section{Introduction}
+%
+%  In some cases, there is just enough space to place a figure or table on a page,
+%  unfortunately there is no space left for the caption below or above.
+%  Moreover, it is might be impossible to decrease the size (for example, due to a
+%  fixed scale of a map) or the use of \pkg{longtable} is inappropriate.
+%  In these (rare) cases it seems acceptable to place the caption on the opposite
+%  page in |twoside| mode or on the preceding/following page in |oneside| mode.
+%  For this purpose the package \fp\ provides the new environments |FPfigure|
+%  and |FPtable| in the sense of `generic markup'.  The basic idea is to use
+%  two floats, which follow directly and contain the figure/table and the caption
+%  respectively.  For correct positioning on odd or even pages in |twoside| mode
+%  at least two compilation runs are required.
+%
+% ^^A -----------------------------
+%
+%  \section{Usage}
+%
+%  \changes{v0.1}{1998/10/07}{First options introduced}
+%
+%  To use this package just type in the preamble of your document\\
+%  \hspace*{1cm} |\usepackage[|\meta{option}|]{fltpage}|.
+%
+%  The order of caption and figure/table are controlled one of the following options:
+%  \begin{options}{closeFloats}
+%   \item[closeFloats]
+%    the float using the whole page is placed on the next page.
+%    When the current page is even the caption is placed on the bottom,
+%    when it is odd the caption is placed at the bottom of the page after the
+%    float.  In any case the caption appears on opposite page in |twoside|
+%    mode of document or the page before in |oneside| mode.
+%   \item[rightFloats, CaptionBefore]
+%    the big float appears always on the right page and the caption afterwards.
+%   \item[leftFloats, CaptionAfterwards]
+%    the big float appears always on the left page and the caption afterwards.
+%  \end{options}
+%
+%  To distinguish the `isolated' caption from the text a separator line:
+%  \begin{options}{closeFloats}
+%   \item[noSeparatorLine]
+%     With this option the the separator will be suppressed
+%  \end{options}
+%
+%  To clarify the connection of caption to the float on an other page it might
+%  be helpful to give a hint like `Fig. N (on the facing page):'.  The following
+%  options control, how this is implemented:
+%  \begin{options}{closeFloats}
+%   \item[german]
+%    So far only German is implemented as other language.
+%   \item[varioref]
+%    Reference texts are already implemented for many languages in the standard
+%    package |varioref|, which implements slightly different expressions, too.
+%    With this option these texts will be used.
+%  \changes{v0.3}{1998/10/29}{new option}
+%   \item[noHints]
+%    When this option is used, any hint from the float caption to the float is
+%    disabled.
+%  \end{options}
+%
+%  Moreover the following global options (probably declared with the document
+%  class) will be evaluated:
+%  \begin{options}{closeFloats}
+%   \item[draft]
+%    causes placing of margin notes, where in the running text the one of the
+%    new environments is inserted.
+%   \item[oneside, twoside]
+%    just to decide mode of document\dots
+%  \end{options}
+%
+% \begin{macro}{FPfigure}
+% \begin{macro}{FPtable}
+%  In your Document you simply use the new environments instead of the standard
+%  environments |table| or |figure| with the usual |\begin{}| and |\end{}| commands:\\
+%  \hspace*{1cm}  |\begin{FPtable} ... \end{FPtable}|
+%  \\
+%  \hspace*{1cm}  |\begin{FPfigure} ... \end{FPfigure}|
+% \end{macro}
+% \end{macro}
+%  Be sure that there are not more than one or two `small' pending floats, otherwise
+%  the results will become unpredictable.  Moreover you should not use more than one
+%  of the new environment on a page.  The contents of the second will probably
+%  overwrite the contents of the first!
+%
+%  \paragraph{Example}
+%  \changes{v0.3}{1998/11/06}{Example inserted}
+%  The following example will produce a caption below and an almost empty facing
+%  page:\\
+%  \begin{FPfigure}
+%   \caption{A caption alone on a page will belong to the
+%            following figure without a caption!}
+%   \fbox{\rule[-10cm]{0pt}{\textheight}Frame symbolizing figure on a whole page.\hspace{5cm}}
+%  \end{FPfigure}
+%  \hspace*{08mm} |\usepackage[rightFloats]{fltpage}|\\
+%  \hspace*{10mm} |...|\\
+%  \hspace*{10mm} |\begin{FPfigure}|\\
+%  \hspace*{12mm} |\caption{A caption alone ... figure without a caption!}|\\
+%  \hspace*{12mm} |\fbox{\rule[-10cm]{0pt}{\textheight}Frame ... page.\hspace{5cm}}|\\
+%  \hspace*{10mm} |\end{FPfigure}|
+%
+% ^^A -----------------------------
+%
+%  \subsection{Requirements}
+%
+%  The present version of \fp\ (v.\fileversion) has been developed
+%  and tested with \LaTeXe{} of 1998/06/01 using em\TeX~4b running \TeX~3.14159
+%  under Windows~3.1, using the \cls{article} document class.
+%  It requires
+%  the standard \LaTeX\ package \pkg{ifthen} vers.\,1.0n of 1997/11/02
+%  and \pkg{tools} package \pkg{afterpage} vers.\,1.08 of 1995/10/27.
+%  Maybe it will work with older versions, maybe not\dots
+%
+%  With the option |varioref| the \pkg{tools} package \pkg{varioref} is
+%  needed, as well.
+%
+% ^^A -----------------------------
+%
+%  \subsection{Compatibility}
+%
+%  This package was developed and tested with following versions of the
+%  other packages:
+%  \begin{center} \begin{tabular}{lll}
+%   package           & version & date \\\hline
+%   \pkg{sidecap}  & 1.00    & 1997/05/08 \\
+%   \pkg{caption}  & 1.4b    & 1995/04/05 \\
+%   \pkg{booktabs} & 1.00    & 1995/11/06 \\
+%  \end{tabular} \end{center}
+%  Again it may work with older versions or not\dots
+%
+% ^^A -----------------------------
+%
+%  \section{Known problems and limitations}
+%
+%  This package is rather a quick and dirty solution to a problem than a
+%  sophisticated mechanism for placing captions and floats.  It should be
+%  regarded as an experiment, rather than a utility.  It was written by
+%  Sebastian Gross not only for it utility value, but as part of the process
+%  of learning LaTeX.   Therefore it is far from being perfect, and comments
+%  are welcome.   Your remarks and ideas are welcome to improve the concept
+%  and implementation in future releases.
+%
+%  Probably most problems will arose from pending floats, which should be
+%  cleared with |\clearpage|.  So far, no attempt is done!
+%
+%  When unpredicted suites of caption and floats result, you must \emph{first}
+%  assure two compilations of your document.
+%  An unresolved problem happens for example when the current page is even and
+%  the caption should be placed on the bottom of the page, but there is not
+%  enough space for it.  It will be moved to the next page (odd) and the long
+%  float will be on next even page, which means caption and float are
+%  separated!  To inquire this problem the option |draft| is provided, which
+%  causes the a margin note, where the FPfloat was inserted in the text.
+%
+%  The simple design employed does not allow any floats on the odd text page
+%  following the big float before the caption is resolved.
+%
+%  Also there is no solution implemented, when two of the new environments
+%  occur within a short interval.  This is especially dangerous when they
+%  are called on one page:  The contents of the second will overwrite the
+%  contents of the first!
+%
+%  In some cases the capacity of \TeX\ might be exceeded (main memory).
+%  This happens for example, when the table itself is too big.  It is
+%  assumed that tables included by files up to approximately 30\,KB will
+%  fill one page, even with |\tiny|.   Though, bigger tables may be included
+%  with the standard |table| environment\dots
+%
+%  This package does not work correctly with the \pkg{showkeys} package.
+%  Apparently the behaviour of the |\isodd{}| command of the standard
+%  \pkg{ifthen} package is disabled.
+%
+% ^^A -----------------------------
+%
+%  \section{Acknowlegments}
+%
+%  This package was partly based on the contributions to |de.comp.text.tex|,
+%  particulary of Hans Steffani, Heiko Oberdiek, Martin Schr\"oder, Stefan Ulrich.
+%  I have to admit, the exploitation of  Rolf Niepraschk's \pkg{sidecap}
+%  package, especially how to write a documented style file.
+%
+% ^^A -----------------------------
+%
+%  \section{The documentation driver file}
+%
+%  The next bit of code contains the documentation driver file for \TeX\, i.\,e.,
+%  the file that will produce the documentation you are currently reading.
+%  It will be extracted from this file by the \cls{docstrip} program.
+%    \begin{macrocode}
+%<*driver>
+\documentclass{ltxdoc}
+\setlength\hfuzz{5pt}    % ignore small overfull boxes
+\GetFileInfo{fltpage.sty}
+%\CodelineIndex
+%\EnableCrossrefs    % Will prepare and index
+%\DisableCrossrefs   % Say \DisableCrossrefs if index is ready
+%\OnlyDescription    % comment out for implementation details
+%\RecordChanges      % Gather update information
+\usepackage[rightFloats]{fltpage}
+\MakeShortVerb{\|}
+\begin{document}
+   \DocInput{fltpage.dtx}
+\end{document}
+%</driver>
+%    \end{macrocode}
+%
+% ^^A -----------------------------
+%
+%  \StopEventually{}
+%  \section{The implementation}
+%
+%  \subsection{File and Package Identification}
+%
+%    \begin{macrocode}
+%<*package>
+\NeedsTeXFormat{LaTeX2e}
+\ProvidesPackage{fltpage}[1998/10/29 v.0.3 Floats on full page (SMU)]
+%    \end{macrocode}
+%
+%  \subsection{Necessary files}
+%
+%    \begin{macrocode}
+\RequirePackage{ifthen}
+\RequirePackage{afterpage}
+%    \end{macrocode}
+%
+%  \subsection{Some internal variables and macros}
+%
+% \begin{macro}{FP@figureC}
+% \begin{macro}{FP@tableC}
+%  Two counters to store the number of instantiations, used to create unique labels:
+%    \begin{macrocode}
+\newcounter{FP@figureC}
+\newcounter{FP@tableC}
+%    \end{macrocode}
+% \end{macro}
+% \end{macro}
+%
+% \begin{macro}{\FP@floatCorpusBOX}
+%  To store the actual figure or table we will use a box:
+%    \begin{macrocode}
+\newsavebox{\FP@floatCorpusBOX}
+%    \end{macrocode}
+% \end{macro}
+%
+% \begin{macro}{\FP@guide}
+% \begin{macro}{\FP@guideStyle}
+% \begin{macro}{\FP@guideOneside}
+% \begin{macro}{\FP@guideTwoside}
+% \begin{macro}{\FP@guideAfter}
+% \begin{macro}{\FP@guideBefore}
+% \begin{macro}{\FP@guideFaceBefore}
+% \begin{macro}{\FP@guideFaceAfter}
+%  To clarify the connection of caption to the float on other page it might be
+%  helpful to give a hint with the macro |\FP@guide|.  The macro |\FP@guideStyle|
+%  contains the appropriate style options. The |\FP@guideAfter|,
+%  |\FP@guideFaceAfter|, and |\FP@guideFaceAfter| contain the the default text
+%  strings:
+%    \begin{macrocode}
+\newcommand*{\FP@guide}{}%
+\newcommand*{\FP@guideStyle}{\slshape}
+\newcommand*{\FP@guideOneside}{following page}
+\newcommand*{\FP@guideTwoside}{facing page}
+\newcommand*{\FP@guideAfter}{following page}
+\newcommand*{\FP@guideBefore}{preceding page}
+\newcommand*{\FP@guideFaceBefore}{preceding page}
+\newcommand*{\FP@guideFaceAfter}{following page}
+%    \end{macrocode}
+% \end{macro}
+% \end{macro}
+% \end{macro}
+% \end{macro}
+% \end{macro}
+% \end{macro}
+% \end{macro}
+% \end{macro}
+%
+% \begin{macro}{\FP@separatorCaption}
+%  To distinguish the caption on the separate page better from the text, we define
+%  a separator:
+%    \begin{macrocode}
+\newcommand*{\FP@separatorCaption}{\rule{\linewidth}{.4pt}}
+%    \end{macrocode}
+% \end{macro}
+%
+% \begin{macro}{\FP@positionLabel}
+%  To get information about the page we need some unique labels
+%    \begin{macrocode}
+\newcommand{\FP@positionLabel}{FP\@captype-\number\value{FP@\@captype C}-pos}
+%    \end{macrocode}
+% \end{macro}
+%
+% \begin{macro}{\FP@helpNote}
+%  For debugging the following messages are displayed helping to identify the
+%  position of an |FPfigure| resp.\ |FPtable|.
+%    \begin{macrocode}
+\newcommand{\FP@helpNote}[2]{%
+  \typeout{FP#1 is inserted on page \pageref{#2}!}}%
+%    \end{macrocode}
+% \end{macro}
+%
+% \begin{macro}{\FP@float}
+% \begin{macro}{\FP@floatOneside}
+% \begin{macro}{\FP@floatTwoside}
+%  The Internal Macro |\FP@float| is the central output macro to perform the
+%  sequence of caption and float.  Here it is preliminary defined as a dummy:
+%    \begin{macrocode}
+\newcommand{\FP@floatOneside}{}
+\newcommand{\FP@floatTwoside}{}
+\newcommand{\FP@float}{}
+%    \end{macrocode}
+% \end{macro}
+% \end{macro}
+% \end{macro}
+%
+%
+% \subsection{Declaration of options}
+%
+% \begin{macro}{german}
+%  In other languages the text strings pointing to the page of the float must be
+%  declared in other languages.  So far only German is implemented.
+%  When option |varioref| is later used, we must pass this option to
+%  \pkg{varioref}:
+%    \begin{macrocode}
+\DeclareOption{german}{%
+  \renewcommand{\FP@guideAfter}{n\"achste Seite}
+  \renewcommand{\FP@guideBefore}{vorhergehende Seite}
+  \renewcommand{\FP@guideOneside}{\FP@guideAfter}
+  \renewcommand{\FP@guideFaceBefore}{gegen\"uberliegende Seite}
+  \renewcommand{\FP@guideFaceAfter}{gegen\"uberliegende Seite}
+  \renewcommand{\FP@guideTwoside}{\FP@guideFaceAfter}
+  \PassOptionsToPackage{german}{varioref}
+}%
+%    \end{macrocode}
+% \end{macro}
+% \begin{macro}{varioref}
+%  Reference texts are already implemented for many languages in the standard
+%  package \pkg{varioref}, which implements slightly different expressions.
+%  To ensure the inclusion of the package we use |\RequirePackage{}|, which can
+%  only placed after |\ProcessOptions| below.  Therefore the code is delayed
+%  by |\AtBeginDocument{}|.
+%    \begin{macrocode}
+\DeclareOption{varioref}{%
+  \AtBeginDocument{%
+    \RequirePackage{varioref}
+    \ifthenelse{\equal{\reftextbefore}{\@empty}}%
+      {}{\renewcommand{\FP@guideBefore}{\reftextbefore}}%
+    \ifthenelse{\equal{\reftextafter}{\@empty}}%
+      {}{\renewcommand{\FP@guideAfter}{\reftextafter}}%
+    \renewcommand{\FP@guideOneside}{\FP@guideAfter}
+    \ifthenelse{\equal{\reftextfacebefore}{\@empty}}%
+      {}{\renewcommand{\FP@guideFaceBefore}{\reftextfacebefore}}%
+    \ifthenelse{\equal{\reftextfaceafter}{\@empty}}%
+      {}{\renewcommand{\FP@guideFaceAfter}{\reftextfaceafter}}%
+    \renewcommand{\FP@guideTwoside}{\FP@guideFaceAfter}%
+  }%
+}%
+%    \end{macrocode}
+% \end{macro}
+%
+%   The Options are implemented via |\FP@float|, which will now have
+%   three arguments:
+%   The first is the label of the current page to determine if it is odd or even.
+%   The second contains the float itself, i.e. the figure ore table.
+%   The third contains all the commands, to initialize counters etc..
+%   The fourth is the caption part.
+% \begin{macro}{closeFloats}
+%    \begin{macrocode}
+\DeclareOption{closeFloats}{%
+  \renewcommand{\FP@floatOneside}[3]{#3#2#1}%
+  \renewcommand{\FP@floatTwoside}[4]{%
+    \ifthenelse{\isodd{\pageref{#1}}}{#2#3#4}{#4#3#2}}%
+}%
+%    \end{macrocode}
+% \end{macro}
+% \begin{macro}{leftFloats}
+%    \begin{macrocode}
+\DeclareOption{leftFloats}{%
+  \renewcommand{\FP@floatOneside}[3]{#1#2#3}%
+  \renewcommand{\FP@floatTwoside}[4]{%
+    \ifthenelse{\isodd{\pageref{#1}}}{{#2#3#4}}{\afterpage{#2#3#4}}}%
+  \renewcommand{\FP@guideOneside}{\FP@guideBefore}%
+  \renewcommand{\FP@guideTwoside}{\FP@guideFaceBefore}%
+}%
+%    \end{macrocode}
+% \end{macro}
+% \begin{macro}{rightFloats}
+%    \begin{macrocode}
+\DeclareOption{rightFloats}{%
+  \renewcommand{\FP@floatOneside}[3]{#3#2#1}%
+  \renewcommand{\FP@floatTwoside}[4]{%
+    \ifthenelse{\isodd{\pageref{#1}}}{\afterpage{#4#3#2}}{{#4#3#2}}}%
+  \renewcommand{\FP@guideOneside}{\FP@guideAfter}%
+  \renewcommand{\FP@guideTwoside}{\FP@guideFaceAfter}%
+}%
+%    \end{macrocode}
+% \end{macro}
+% \begin{macro}{CaptionAfterwards}
+% \begin{macro}{CaptionBefore}
+% Some synonymous options
+%    \begin{macrocode}
+\DeclareOption{CaptionAfterwards}{\ExecuteOptions{leftFloats}}
+\DeclareOption{CaptionBefore}{\ExecuteOptions{rightFloats}}%
+%    \end{macrocode}
+% \end{macro}
+% \end{macro}
+%
+% \begin{macro}{draft}
+% With the following options, we process options packages etc:
+%    \begin{macrocode}
+\DeclareOption{draft}{%
+  \renewcommand{\FP@helpNote}[2]{%
+    \marginpar{Insertion of FP#1}%
+    \typeout{FP#1 is inserted on page \pageref{#2}!}}%
+}%
+%    \end{macrocode}
+% \end{macro}
+% \begin{macro}{oneside}
+%    \begin{macrocode}
+\DeclareOption{oneside}{%
+  \renewcommand{\FP@guide}{\FP@guideStyle(\FP@guideOneside)}%
+  \renewcommand{\FP@float}[4]{\FP@floatOneside{#2}{#3}{#4}}
+}%
+%    \end{macrocode}
+% \end{macro}
+% \begin{macro}{twoside}
+%    \begin{macrocode}
+\DeclareOption{twoside}{%
+  \renewcommand{\FP@guide}{\FP@guideStyle(\FP@guideTwoside)}%
+  \renewcommand{\FP@float}[4]{\FP@floatTwoside{#1}{#2}{#3}{#4}}
+}%
+%    \end{macrocode}
+% \end{macro}
+%
+%
+% \begin{macro}{noSeparatorLine}
+%  He we implement some options to disable some of the functionality of the \fp\
+%  package: First the implementation of a separator line in |\FP@separatorCaption|
+%  is destroyed:
+%    \begin{macrocode}
+\DeclareOption{noSeparatorLine}{%
+  \renewcommand{\FP@separatorCaption}{}
+}
+%    \end{macrocode}
+% \end{macro}
+% \begin{macro}{noHints}
+%  Secondly any hint in the caption towards the float is disabled.  We must
+%  delay this, because the option |varioref| will be executed later, too.
+%  We assume that the order of delayed code is the same as in the declaration.
+%    \begin{macrocode}
+\DeclareOption{noHints}{%
+  \AtBeginDocument{\renewcommand{\FP@guide}{}}
+}%
+%    \end{macrocode}
+% \end{macro}
+%
+%  Unknown options will result in a warning. Perhaps they mean anything to
+%  \pkg{varioref}:
+%    \begin{macrocode}
+\DeclareOption*{%
+  \PackageWarning{fltpage}{Unknown option `\CurrentOption'!}%
+  \PassOptionsToPackage{\currentOption}{varioref}
+}%
+%    \end{macrocode}
+%
+% \subsection{Excecution of options}
+%
+%  Set the default behaviour:
+%    \begin{macrocode}
+\ExecuteOptions{closeFloats}
+\ExecuteOptions{oneside}
+%    \end{macrocode}
+%
+%  Don't forget to process the Options in the order of declaration:
+%    \begin{macrocode}
+\ProcessOptions*
+\relax
+%    \end{macrocode}
+%
+% \subsection{New environments}
+%
+% \subsubsection{Internal environment doing the magic}
+%
+% \begin{macro}{\FP@floatBegin}
+%  The opening statement |\FP@float| has one argument which contains
+%  the strings `figure' or `table'.
+%    \begin{macrocode}
+\newcommand{\FP@floatBegin}[1]{%
+%    \end{macrocode}
+%  First we save the type of float for further processing to |\@captype|:
+%    \begin{macrocode}
+  \gdef\@captype{#1}%
+%    \end{macrocode}
+%  The |caption|, |label| and |fnum@figure| resp. |fnum@table| commands must be saved
+%  to be used later in the local group:
+%    \begin{macrocode}
+  \global\let\FP@savedCaptionCommand\caption%
+  \global\let\FP@savedLabelCommand\label%
+  \ifthenelse{\equal{\@captype}{figure}}
+     {\global\let\old@Fnum\fnum@figure}%
+     {\global\let\old@Fnum\fnum@table}%
+%    \end{macrocode}
+%  Initialize some text variables\dots
+%    \begin{macrocode}
+  \let\FP@LabelText\@empty%
+  \let\FP@CaptionText\@empty%
+  \let\FP@optionalCaptionText\@empty%
+%    \end{macrocode}
+%  Now we redefine the |label| and |caption| commands:
+%    \begin{macrocode}
+  \renewcommand\label[1]{\gdef\FP@LabelText{##1}}%
+  \renewcommand\caption[2][]{\gdef\FP@optionalCaptionText{##1}\gdef\FP@CaptionText{##2}}%
+%    \end{macrocode}
+%
+%  Finally we must start to record/save the contents of the float, i.e. figure or table etc.,
+%  in a box.
+%    \begin{macrocode}
+  \begin{lrbox}{\FP@floatCorpusBOX}%
+}%
+%    \end{macrocode}
+% \end{macro}
+%
+%
+%  \begin{macro}{\FP@floatEnd}
+%  The closing statement |\FP@floatEnd| terminates the collection of the float and
+%  causes the output of it and the caption.  Since we use |\afterpage|, the local Box
+%  |\FP@floatCorpusBOX| must assigned to the global |\FP@floatCorpusBOX|.
+%    \begin{macrocode}
+\newcommand{\FP@floatEnd}{%
+  \end{lrbox}%
+  \global\setbox\FP@floatCorpusBOX=\box\FP@floatCorpusBOX
+%    \end{macrocode}
+%  Creates a label for each figure or table for later determination if the page
+%  is odd or even. The counters |FP@figureC| or |FP@tableC| must be
+%  incremented before.
+%    \begin{macrocode}
+  \stepcounter{FP@\@captype C}%
+  \FP@savedLabelCommand{\FP@positionLabel}%
+%    \end{macrocode}
+%  Here we give some hints to the user about the state of the environment\dots
+%    \begin{macrocode}
+  \FP@helpNote{\@captype}{\FP@positionLabel}%
+%    \end{macrocode}
+%  Now call the wanted sequence of caption and float according to the options above
+%  with the |\FP@float| macro.  The first argument is the location label, which
+%  will be used to determine the current page.
+%    \begin{macrocode}
+  \FP@float{\FP@positionLabel}% location label test
+%    \end{macrocode}
+%  The second argument contains the float itself:
+%  First we open a float environment of type |\@captype| with option |[p]|.  The
+%  float itself, i.e. figure or table, will be used the contents of the box
+%  |\FP@floatCorpusBOX|.
+%  Before placing the label, in order to get the actual page of the figure/table
+%  referenced later, rather than the one with the caption, we must increment the
+%  the counter of type |\@captype|.
+%    \begin{macrocode}
+          {\begin{\@captype}[p!]
+             \usebox{\FP@floatCorpusBOX}%
+             \refstepcounter{\@captype}%
+             \ifthenelse{\equal{\FP@LabelText}{\@empty}}
+                {}{\FP@savedLabelCommand{\expandafter\protect\FP@LabelText}}%
+          \end{\@captype}}
+%    \end{macrocode}
+%  The third argument is used to reset something changed in the first object.
+%  So far it is only the counter of type |\@captype|.
+%    \begin{macrocode}
+           {\addtocounter{\@captype}{-1}}
+%    \end{macrocode}
+%  The fourth argument contains the caption:
+%  Again we open a float environment of type |\@captype| with option |[p]|.
+%  To distinguish the caption from the text, it is separated with a horizontal line.
+%  Space above and below are adjusted accordingly.
+%  Than we will adjust |\fnum@figure|, when wanted.
+%  Finally the caption is given with or without optional argument.
+%    \begin{macrocode}
+           {\begin{\@captype}[b!]%
+             \ifthenelse{\equal{\FP@guide}{\@empty}}%
+               {}{\ifthenelse{\equal{\@captype}{figure}}%
+                   {\renewcommand{\fnum@figure}{\old@Fnum\ {\FP@guide}}}%
+                   {\renewcommand{\fnum@table}{\old@Fnum\ {\FP@guide}}}}%
+             \setlength{\abovecaptionskip}{2pt plus2pt minus 1pt} % length above caption
+             \setlength{\belowcaptionskip}{2pt plus2pt minus 1pt} % length above caption
+             \FP@separatorCaption%
+             \ifthenelse{\equal{\FP@optionalCaptionText}{\@empty}}%
+               {\FP@savedCaptionCommand{\expandafter\protect\FP@CaptionText}}%
+               {\FP@savedCaptionCommand[\expandafter\protect\FP@optionalCaptionText]{\expandafter\protect\FP@CaptionText}}%
+           \end{\@captype}}%
+}%
+%    \end{macrocode}
+%  \end{macro}
+%
+%
+%  \subsubsection{The user interface with the new two environments}
+%
+% \begin{macro}{FPfigure}
+% \begin{macro}{FPtable}
+%  Finally we implement the new environments, the user wants to use.
+%  They redirect to |FP@floatBegin| with the string `figure' or `table' and to
+%  |FP@floatEnd|.
+%    \begin{macrocode}
+\newenvironment{FPfigure}{\FP@floatBegin{figure}}{\FP@floatEnd}
+\newenvironment{FPtable}{\FP@floatBegin{table}}{\FP@floatEnd}
+%    \end{macrocode}
+% \end{macro}
+% \end{macro}
+%
+%
+%    \begin{macrocode}
+%</package>
+%    \end{macrocode}
+%
+% ^^A -----------------------------
+%
+\endinput
+%% \CharacterTable
+%% {Upper-case    \A\B\C\D\E\F\G\H\I\J\K\L\M\N\O\P\Q\R\S\T\U\V\W\X\Y\Z
+%%  Lower-case    \a\b\c\d\e\f\g\h\i\j\k\l\m\n\o\p\q\r\s\t\u\v\w\x\y\z
+%%  Digits        \0\1\2\3\4\5\6\7\8\9
+%%  Exclamation   \!     Double quote  \"     Hash (number) \#
+%%  Dollar        \$     Percent       \%     Ampersand     \&
+%%  Acute accent  \'     Left paren    \(     Right paren   \)
+%%  Asterisk      \*     Plus          \+     Comma         \,
+%%  Minus         \-     Point         \.     Solidus       \/
+%%  Colon         \:     Semicolon     \;     Less than     \<
+%%  Equals        \=     Greater than  \>     Question mark \?
+%%  Commercial at \@     Left bracket  \[     Backslash     \\
+%%  Right bracket \]     Circumflex    \^     Underscore    \_
+%%  Grave accent  \`     Left brace    \{     Vertical bar  \|
+%%  Right brace   \}     Tilde         \~}
+%  \Finale
diff --git a/Master/texmf-dist/source/latex/fltpage/fltpage.ins b/Master/texmf-dist/source/latex/fltpage/fltpage.ins
new file mode 100644
index 00000000000..08aa7101bbd
--- /dev/null
+++ b/Master/texmf-dist/source/latex/fltpage/fltpage.ins
@@ -0,0 +1,87 @@
+%%
+%% Copyright (C) [1998] by Sebastian Gross. All rights reserved.
+%%
+%% IMPORTANT NOTICE:
+%%
+%% You are not allowed to change this file.
+%%
+%% The copyright notice below is also valid for this file.
+%%
+%% This file will be used by the docstrip.tex program to generate
+%% fast loadable files from the doc files.
+%%
+%% Remember: DON’T CHANGE THIS FILE
+%%
+%% --------------- start of docstrip commands ------------------
+\def\batchfile{fltpage.ins}
+\input docstrip.tex
+{\ifx\generate\undefined
+\Msg{**********************************************}
+\Msg{*}
+\Msg{* This installation requires docstrip}
+\Msg{* version 2.3c or later.}
+\Msg{*}
+\Msg{* An older version of docstrip has been input}
+\Msg{*}
+\Msg{**********************************************}
+\errhelp{Move or rename old docstrip.tex.}
+\errmessage{Old docstrip in input path}
+\batchmode
+\csname @@end\endcsname
+\fi}
+
+\preamble
+
+Copyright (C) 1998 by Sebastian Gross. All rights reserved.
+
+
+This file is part of the fltpage package
+
+IMPORTANT NOTICE:
+
+This a tool or better yet, an experiments written by Sebastian Gross,
+who is writing this not only for it utility value, but as part of the
+process of learning LaTeX.  This utility is far from perfect, and
+comments are welcome.
+
+The usual disclaimers apply:  If it doesn't work right that's your problem!
+
+The usual GNU-style conditions apply: If you change it, you take
+the blame; if you pass it on, pass on all present conditions;
+
+Error Reports in case of UNCHANGED versions to
+
+      Sebastian Gross   <seppel@zedat.fu-berlin.de>
+
+\endpreamble
+\declarepreamble\driverpreamble
+This file is part of the fltpage package
+-----------------------------------------
+
+Copyright (C) 1998 Sebastian Gross. All rights reserved.
+
+To produce the documentation in the way you like you are allowed
+to change this driver file.
+\endpreamble
+
+\keepsilent
+\askforoverwritefalse
+\generate{\file{fltpage.sty}{\from{fltpage.dtx}{package}}
+         }
+
+\Msg{***********************************************************}
+\Msg{*}
+\Msg{* To finish the installation you have to move the following}
+\Msg{* style files into a directory searched by TeX:}
+\Msg{*}
+\Msg{* \space\space fltpage.sty}
+\Msg{*}
+\Msg{* To produce the documentation run the file fltpage.dtx}
+\Msg{* through LaTeX.}
+\Msg{*}
+\Msg{* Happy TeXing}
+\Msg{***********************************************************}
+
+\endinput
+%%
+%% End of file ‘fltpage.ins’.
diff --git a/Master/texmf-dist/tex/latex/fltpage/fltpage.sty b/Master/texmf-dist/tex/latex/fltpage/fltpage.sty
new file mode 100644
index 00000000000..aa5d385cfb3
--- /dev/null
+++ b/Master/texmf-dist/tex/latex/fltpage/fltpage.sty
@@ -0,0 +1,186 @@
+%%
+%% This is file `fltpage.sty',
+%% generated with the docstrip utility.
+%%
+%% The original source files were:
+%%
+%% fltpage.dtx  (with options: `package')
+%% 
+%% Copyright (C) 1998 by Sebastian Gross. All rights reserved.
+%% 
+%% 
+%% This file is part of the fltpage package
+%% 
+%% IMPORTANT NOTICE:
+%% 
+%% This a tool or better yet, an experiments written by Sebastian Gross,
+%% who is writing this not only for it utility value, but as part of the
+%% process of learning LaTeX.  This utility is far from perfect, and
+%% comments are welcome.
+%% 
+%% The usual disclaimers apply:  If it doesn't work right that's your problem!
+%% 
+%% The usual GNU-style conditions apply: If you change it, you take
+%% the blame; if you pass it on, pass on all present conditions;
+%% 
+%% Error Reports in case of UNCHANGED versions to
+%% 
+%%       Sebastian Gross   <seppel@zedat.fu-berlin.de>
+%% 
+%%
+%% \iffalse meta-comment
+%% ===================================================================
+%%  @LaTeX-package-file{
+%%     author     = {Sebastian Gross},
+%%     version    = {0.3},
+%%     date       = {13 Nov 1998},
+%%     filename   = {fltpage.dtx},
+%%     email      = {seppel@zedat.fu-berlin.de},
+%%     codetable  = {ISO/ASCII},
+%%     keywords   = {LaTeX2e, float, table, figure, caption, FPfigure, FPtable},
+%%     supported  = {yes},
+%%     docstring  = {LaTeX package which defines new environments to place
+%%                   captions of tables and figures on the facing/following page.}
+%%  }
+%% ===================================================================
+%% \fi
+\NeedsTeXFormat{LaTeX2e}
+\ProvidesPackage{fltpage}[1998/10/29 v.0.3 Floats on full page (SMU)]
+\RequirePackage{ifthen}
+\RequirePackage{afterpage}
+\newcounter{FP@figureC}
+\newcounter{FP@tableC}
+\newsavebox{\FP@floatCorpusBOX}
+\newcommand*{\FP@guide}{}%
+\newcommand*{\FP@guideStyle}{\slshape}
+\newcommand*{\FP@guideOneside}{following page}
+\newcommand*{\FP@guideTwoside}{facing page}
+\newcommand*{\FP@guideAfter}{following page}
+\newcommand*{\FP@guideBefore}{preceding page}
+\newcommand*{\FP@guideFaceBefore}{preceding page}
+\newcommand*{\FP@guideFaceAfter}{following page}
+\newcommand*{\FP@separatorCaption}{\rule{\linewidth}{.4pt}}
+\newcommand{\FP@positionLabel}{FP\@captype-\number\value{FP@\@captype C}-pos}
+\newcommand{\FP@helpNote}[2]{%
+  \typeout{FP#1 is inserted on page \pageref{#2}!}}%
+\newcommand{\FP@floatOneside}{}
+\newcommand{\FP@floatTwoside}{}
+\newcommand{\FP@float}{}
+\DeclareOption{german}{%
+  \renewcommand{\FP@guideAfter}{n\"achste Seite}
+  \renewcommand{\FP@guideBefore}{vorhergehende Seite}
+  \renewcommand{\FP@guideOneside}{\FP@guideAfter}
+  \renewcommand{\FP@guideFaceBefore}{gegen\"uberliegende Seite}
+  \renewcommand{\FP@guideFaceAfter}{gegen\"uberliegende Seite}
+  \renewcommand{\FP@guideTwoside}{\FP@guideFaceAfter}
+  \PassOptionsToPackage{german}{varioref}
+}%
+\DeclareOption{varioref}{%
+  \AtBeginDocument{%
+    \RequirePackage{varioref}
+    \ifthenelse{\equal{\reftextbefore}{\@empty}}%
+      {}{\renewcommand{\FP@guideBefore}{\reftextbefore}}%
+    \ifthenelse{\equal{\reftextafter}{\@empty}}%
+      {}{\renewcommand{\FP@guideAfter}{\reftextafter}}%
+    \renewcommand{\FP@guideOneside}{\FP@guideAfter}
+    \ifthenelse{\equal{\reftextfacebefore}{\@empty}}%
+      {}{\renewcommand{\FP@guideFaceBefore}{\reftextfacebefore}}%
+    \ifthenelse{\equal{\reftextfaceafter}{\@empty}}%
+      {}{\renewcommand{\FP@guideFaceAfter}{\reftextfaceafter}}%
+    \renewcommand{\FP@guideTwoside}{\FP@guideFaceAfter}%
+  }%
+}%
+\DeclareOption{closeFloats}{%
+  \renewcommand{\FP@floatOneside}[3]{#3#2#1}%
+  \renewcommand{\FP@floatTwoside}[4]{%
+    \ifthenelse{\isodd{\pageref{#1}}}{#2#3#4}{#4#3#2}}%
+}%
+\DeclareOption{leftFloats}{%
+  \renewcommand{\FP@floatOneside}[3]{#1#2#3}%
+  \renewcommand{\FP@floatTwoside}[4]{%
+    \ifthenelse{\isodd{\pageref{#1}}}{{#2#3#4}}{\afterpage{#2#3#4}}}%
+  \renewcommand{\FP@guideOneside}{\FP@guideBefore}%
+  \renewcommand{\FP@guideTwoside}{\FP@guideFaceBefore}%
+}%
+\DeclareOption{rightFloats}{%
+  \renewcommand{\FP@floatOneside}[3]{#3#2#1}%
+  \renewcommand{\FP@floatTwoside}[4]{%
+    \ifthenelse{\isodd{\pageref{#1}}}{\afterpage{#4#3#2}}{{#4#3#2}}}%
+  \renewcommand{\FP@guideOneside}{\FP@guideAfter}%
+  \renewcommand{\FP@guideTwoside}{\FP@guideFaceAfter}%
+}%
+\DeclareOption{CaptionAfterwards}{\ExecuteOptions{leftFloats}}
+\DeclareOption{CaptionBefore}{\ExecuteOptions{rightFloats}}%
+\DeclareOption{draft}{%
+  \renewcommand{\FP@helpNote}[2]{%
+    \marginpar{Insertion of FP#1}%
+    \typeout{FP#1 is inserted on page \pageref{#2}!}}%
+}%
+\DeclareOption{oneside}{%
+  \renewcommand{\FP@guide}{\FP@guideStyle(\FP@guideOneside)}%
+  \renewcommand{\FP@float}[4]{\FP@floatOneside{#2}{#3}{#4}}
+}%
+\DeclareOption{twoside}{%
+  \renewcommand{\FP@guide}{\FP@guideStyle(\FP@guideTwoside)}%
+  \renewcommand{\FP@float}[4]{\FP@floatTwoside{#1}{#2}{#3}{#4}}
+}%
+\DeclareOption{noSeparatorLine}{%
+  \renewcommand{\FP@separatorCaption}{}
+}
+\DeclareOption{noHints}{%
+  \AtBeginDocument{\renewcommand{\FP@guide}{}}
+}%
+\DeclareOption*{%
+  \PackageWarning{fltpage}{Unknown option `\CurrentOption'!}%
+  \PassOptionsToPackage{\currentOption}{varioref}
+}%
+\ExecuteOptions{closeFloats}
+\ExecuteOptions{oneside}
+\ProcessOptions*
+\relax
+\newcommand{\FP@floatBegin}[1]{%
+  \gdef\@captype{#1}%
+  \global\let\FP@savedCaptionCommand\caption%
+  \global\let\FP@savedLabelCommand\label%
+  \ifthenelse{\equal{\@captype}{figure}}
+     {\global\let\old@Fnum\fnum@figure}%
+     {\global\let\old@Fnum\fnum@table}%
+  \let\FP@LabelText\@empty%
+  \let\FP@CaptionText\@empty%
+  \let\FP@optionalCaptionText\@empty%
+  \renewcommand\label[1]{\gdef\FP@LabelText{##1}}%
+  \renewcommand\caption[2][]{\gdef\FP@optionalCaptionText{##1}\gdef\FP@CaptionText{##2}}%
+  \begin{lrbox}{\FP@floatCorpusBOX}%
+}%
+\newcommand{\FP@floatEnd}{%
+  \end{lrbox}%
+  \global\setbox\FP@floatCorpusBOX=\box\FP@floatCorpusBOX
+  \stepcounter{FP@\@captype C}%
+  \FP@savedLabelCommand{\FP@positionLabel}%
+  \FP@helpNote{\@captype}{\FP@positionLabel}%
+  \FP@float{\FP@positionLabel}% location label test
+          {\begin{\@captype}[p!]
+             \usebox{\FP@floatCorpusBOX}%
+             \refstepcounter{\@captype}%
+             \ifthenelse{\equal{\FP@LabelText}{\@empty}}
+                {}{\FP@savedLabelCommand{\expandafter\protect\FP@LabelText}}%
+          \end{\@captype}}
+           {\addtocounter{\@captype}{-1}}
+           {\begin{\@captype}[b!]%
+             \ifthenelse{\equal{\FP@guide}{\@empty}}%
+               {}{\ifthenelse{\equal{\@captype}{figure}}%
+                   {\renewcommand{\fnum@figure}{\old@Fnum\ {\FP@guide}}}%
+                   {\renewcommand{\fnum@table}{\old@Fnum\ {\FP@guide}}}}%
+             \setlength{\abovecaptionskip}{2pt plus2pt minus 1pt} % length above caption
+             \setlength{\belowcaptionskip}{2pt plus2pt minus 1pt} % length above caption
+             \FP@separatorCaption%
+             \ifthenelse{\equal{\FP@optionalCaptionText}{\@empty}}%
+               {\FP@savedCaptionCommand{\expandafter\protect\FP@CaptionText}}%
+               {\FP@savedCaptionCommand[\expandafter\protect\FP@optionalCaptionText]{\expandafter\protect\FP@CaptionText}}%
+           \end{\@captype}}%
+}%
+\newenvironment{FPfigure}{\FP@floatBegin{figure}}{\FP@floatEnd}
+\newenvironment{FPtable}{\FP@floatBegin{table}}{\FP@floatEnd}
+\endinput
+%%
+%% End of file `fltpage.sty'.
diff --git a/Master/tlpkg/bin/tlpkg-ctan-check b/Master/tlpkg/bin/tlpkg-ctan-check
index 20508f68996..8f5de7fed6f 100755
--- a/Master/tlpkg/bin/tlpkg-ctan-check
+++ b/Master/tlpkg/bin/tlpkg-ctan-check
@@ -105,7 +105,7 @@ my @WorkingTLP = qw(
           feyn feynmf fge fig4latex figbas figflow
           filecontents findhyph fink first-latex-doc
           fixfoot fixme fixpdfmag
-          flagderiv flippdf float floatrow flowfram fltpoint
+          flagderiv flippdf float floatrow flowfram fltpage fltpoint
           fmtcount fn2end fnbreak
           fncychap foekfont font-change fontch fontinst fontools
           fontspec fonttable fontwrap
diff --git a/Master/tlpkg/tlpsrc/collection-latexextra.tlpsrc b/Master/tlpkg/tlpsrc/collection-latexextra.tlpsrc
index 812b3c3b959..3f2407f7f5c 100644
--- a/Master/tlpkg/tlpsrc/collection-latexextra.tlpsrc
+++ b/Master/tlpkg/tlpsrc/collection-latexextra.tlpsrc
@@ -197,6 +197,7 @@ depend flashcards
 depend flippdf
 depend floatrow
 depend flowfram
+depend fltpage
 depend fmp
 depend fmtcount
 depend fn2end
diff --git a/Master/tlpkg/tlpsrc/fltpage.tlpsrc b/Master/tlpkg/tlpsrc/fltpage.tlpsrc
new file mode 100644
index 00000000000..e69de29bb2d
--- /dev/null
+++ b/Master/tlpkg/tlpsrc/fltpage.tlpsrc