path: root/Master/texmf-dist/tex/latex/concepts/concepts.sty

%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%% \iffalse %%%%
%                                                                              %
%  Copyright (c) 2012 - Michiel Helvensteijn   (www.mhelvens.net)              %
%                                                                              %
%  http://latex-concepts.googlecode.com                                        %
%                                                                              %
%  This work may be distributed and/or modified under the conditions           %
%  of the LaTeX Project Public License, either version 1.3 of this             %
%  license or (at your option) any later version. The latest version           %
%  of this license is in     http://www.latex-project.org/lppl.txt             %
%  and version 1.3 or later is part of all distributions of LaTeX              %
%  version 2005/12/01 or later.                                                %
%                                                                              %
%  This work has the LPPL maintenance status `author-maintained'.              %
%                                                                              %
%  The Current Maintainer of this work is Michiel Helvensteijn.                %
%                                                                              %
%  This work consists of the files concepts.tex and concepts.sty.              %
%                                                                              %
%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%% \fi %%%%

% \CheckSum{266}
%
% \CharacterTable
%  {Upper-case    \A\B\C\D\E\F\G\H\I\J\K\L\M\N\O\P\Q\R\S\T\U\V\W\X\Y\Z
%   Lower-case    \a\b\c\d\e\f\g\h\i\j\k\l\m\n\o\p\q\r\s\t\u\v\w\x\y\z
%   Digits        \0\1\2\3\4\5\6\7\8\9
%   Exclamation   \!     Double quote  \"     Hash (number) \#
%   Dollar        \$     Percent       \%     Ampersand     \&
%   Acute accent  \'     Left paren    \(     Right paren   \)
%   Asterisk      \*     Plus          \+     Comma         \,
%   Minus         \-     Point         \.     Solidus       \/
%   Colon         \:     Semicolon     \;     Less than     \<
%   Equals        \=     Greater than  \>     Question mark \?
%   Commercial at \@     Left bracket  \[     Backslash     \\
%   Right bracket \]     Circumflex    \^     Underscore    \_
%   Grave accent  \`     Left brace    \{     Vertical bar  \|
%   Right brace   \}     Tilde         \~}

%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%
% \subsection{Package Info}                                                    %
%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%



%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%
%
%    \begin{macrocode}
\NeedsTeXFormat{LaTeX2e}
\ProvidesPackage{concepts}[2012/12/29 0.0.6
  managing names and symbols of document specific formal concepts]
%    \end{macrocode}
%
%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%



%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%
% \subsection{Packages}                                                        %
%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%



%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%
%
%  These are the packages we'll need.
%
%    \begin{macrocode}
\RequirePackage{etextools}
\RequirePackage{nth}
\RequirePackage{xspace}
\RequirePackage{xparse}              % 1
\RequirePackage{ltxkeys}[2012/11/17] % 2
\RequirePackage{xstring}
%    \end{macrocode}
% 
%  We need a very recent version of |ltxkeys| in order to
%  properly handle list-values. Note that |xparse| needs
%  to be loaded before |ltxkeys| or things go wrong somehow.
%
%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%



%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%
% \subsection{Facilitating Easy Data Access}                                   %
%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%



  %%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%
  % \begin{macro}{\cnc@d} \marg{identifier}
%%% \begin{macro}{\cnc@g} \marg{identifier}\\\nopagebreak\noindentnext
%
%  This package needs to store and retrieve a lot of data. To make
%  the rest of the code more readable, we define the following commands.
%  They allow a more freeform description of the data.
%  
%  |\cnc@d| returns a control sequence name that resolves
%  to a specific piece of data in |\csname| context.
%  We can get access to the data itself by using |\cnc@g|.
%
%    \begin{macrocode}
\newcommand*{\cnc@d}[1]{cnc@data@#1}
\newcommand*{\cnc@g}[1]{\csuse{\cnc@d{#1}}}
%    \end{macrocode}
%
%  Both take an identifier of one the following shapes:
%  \begin{itemize}
%    \item |concepts|
%    \item |concept|\parg{name}|.option|\parg{name}
%    \item |concept|\parg{name}|.option|\parg{name}|.given|
%    \item |concept|\parg{name}|.option|\parg{name}|.count|
%    \item |concept|\parg{name}|.option|\parg{name}|.index|\parg{number}
%    \item |symbol|\parg{name}|.concept|
%  \end{itemize}
% 
%\end{macro}\end{macro}%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%



%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%
% \subsection{Private General Purpose Macros and Toggles}                      %
%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%



  %%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%
%%% \begin{macro}{\cnc@upper} \marg{string}\\\nopagebreak\noindentnext
%
%  We're going to need a command that capitalizes the first
%  letter of a string which fully expands its argument. So
%  here it is.
%
%    \begin{macrocode}
\newcommand*{\cnc@upper}[1]{\ExpandAftercmds\MakeUppercase{#1}}
%    \end{macrocode}
%
%\end{macro}%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%



  %%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%
  % \begin{macro}{\cnc@grabnumber} \marg{token sequence containing \#1}
%%%                                \momarg{number}\\\nopagebreak\noindentnext
%
%  This is a command we're going to use for the automatically
%  defined short symbol macros later. It has one 'real'
%  mandatory argument and then it captures all numerals
%  (0\ldots 9) that follow it. These numerals are then
%  substituted for all occurrences of \#1 in the mandatory
%  argument which is then `returned'.
%
%    \begin{macrocode}
\newcommand{\cnc@grabnumber}[1]{%
  \def\cnc@dowithnum##1{#1}%
  \futuredef[0123456789]{\cnc@@n}%
    {\expandafter\cnc@dowithnum\expandafter{\cnc@@n}}%
}
%    \end{macrocode}
%
%\end{macro}%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%



  %%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%
  % \begin{macro}{\cnc@csvlistsize} \marg{csvlist}
%%%                                 \marg{command sequence}\\\nopagebreak\noindentnext
%
%  This macro takes a comma-separated list of\ldots anything,
%  and stores its size in the given macro as a simple decimal
%  string.
%
%    \begin{macrocode}
\newcounter{cnc@listsize}
\newrobustcmd{\cnc@csvlistsize}[2]{%
  \setcounter{cnc@listsize}{0}%
  \def\do##1{\stepcounter{cnc@listsize}}\docsvlist{#1}%
  \edef#2{\arabic{cnc@listsize}}%
}
%    \end{macrocode}
%
%\end{macro}%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%



%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%
% \subsection{Private Specific-purpose Macros}                                 %
%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%



  %%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%
  % \begin{macro}{\cnc@conceptname} \marg{plural} \marg{capitalized}
%%%                                 \marg{plural} \marg{concept key}\\\nopagebreak\noindentnext
%
%  This typesets the name of a specific concept in one of four forms. It
%  can be capitalized or not; and it can be singular or plural. We define
%  this private macro because there will be two public macros with this
%  functionality and we want to define the behavior in only one place.
% 
%  The first three arguments are |xparse| style booleans. The first and
%  third are the same because the public macros allow both orders between
%  the |*| and |^| modifiers and we want to have a simple one-to-one 
%  mapping between their arguments and the arguments of this private macro.
% 
%    \begin{macrocode}
\newcommand{\cnc@conceptname}[4]{%
%    \end{macrocode}
%
%  We test if \emph{both} the first and third arguments are true, meaning
%  that the public command has two |*| modifiers. If it does, we give a
%  package error.
%
%    \begin{macrocode}
  \ifboolexpr{ test{\IfBooleanTF{#1}} and test{\IfBooleanTF{#3}} }{%
    \PackageError{concepts}%
      {You used the * modifier twice; once is enough}%
      {I will pretend you just used one *.}%
  }{}%
%    \end{macrocode}
%
%  And then we simply typeset the correct value from our datastore.
%
%    \begin{macrocode}
  \ifboolexpr{ test{\IfBooleanTF{#1}} or test{\IfBooleanTF{#3}} }{%
    \IfBooleanTF{#2}%
      {\cnc@g{concept(#4).option(Plural)}}%
      {\cnc@g{concept(#4).option(plural)}}%
  }{%
    \IfBooleanTF{#2}%
      {\cnc@g{concept(#4).option(Name)}}%
      {\cnc@g{concept(#4).option(name)}}%
  }%
%    \end{macrocode}
%    \uninteresting\begin{macrocode}
}
%    \end{macrocode}
%
%\end{macro}%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%



  %%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%
  % \begin{macro}{\cnc@conceptsymbol} \marg{concept key}
%%%                                   \marg{index}\\\nopagebreak\noindentnext
% 
%  This is the private macro which takes a concept key and an index and returns
%  the corresponding symbol from our data-store. We use it in the public macros
%  that offer this functionality.
%
%  The first thing we do is grab the prefix of the second argument that
%  consists of numerals. The rest of the argument is simply left in
%  the input stream afterwards.
% 
%    \begin{macrocode}
\newcommand*{\cnc@conceptsymbol}[2]{%
  \cnc@grabnumber{%
%    \end{macrocode}
% 
%  We check if an actual numerical value was passed.
% 
%    \begin{macrocode}
    \ifstrempty{##1}{%
%    \end{macrocode}
% 
%  No, we didn't get a numerical index. If there is only one symbol
%  allocated to this concept, we don't care and return that symbol.
% 
%    \begin{macrocode}
      \edef\cnc@symbolcount{\cnc@g{concept(#1).option(symbols).count}}%
      \ifnumcomp{\cnc@symbolcount}{=}{1}{%
        \ensuremath{\cnc@g{concept(#1).option(symbols).index(1)}}%
      }%
%    \end{macrocode}
% 
%  If there are multiple symbols, the lack of an index is ambiguous and
%  we report a package error.
% 
%    \begin{macrocode}
      {%
        \PackageError{concepts}%
          {You didn't specify a number, but the '#1'
           \MessageBreak concept has more than one symbol
           allocated; please\MessageBreak specify a number
           to typeset a specific symbol}%
          {I will pretend you didn't ask for a symbol here.}%
      }%
%    \end{macrocode}
%    \uninteresting\begin{macrocode}
    }%
%    \end{macrocode}
% 
%  Now follows the `else' branch: we did get a numerical index!
% 
%    \begin{macrocode}
    {%
%    \end{macrocode}
% 
%  We check whether it is larger than the number of symbols
%  allocated to the concept.
% 
%    \begin{macrocode}
      \edef\cnc@symbolcount{\cnc@g{concept(#1).option(symbols).count}}%
      \ifnumcomp{##1}{>}{\cnc@symbolcount}{%
%    \end{macrocode}
% 
%  If it is, we report an `index out of bounds' error. We first prepare an
%  appropriate sentence fragment so the error message becomes more readable. 
% 
%    \begin{macrocode}
        \edef\cnc@nth{##1\nthSuff0##1\delimiter}%
        \ExpandNext\IfStrEq{\cnc@symbolcount}{0}{%
          \edef\cnc@somany{no symbols}%
        }{\ExpandNext\IfStrEq{\cnc@symbolcount}{1}{%
          \edef\cnc@somany{only 1 symbol}%
        }{%
          \edef\cnc@somany{only \cnc@symbolcount\space symbols}%
        }}%
        \PackageError{concepts}%
          {You asked for the \cnc@nth\space '#1' symbol,
           but\MessageBreak the '#1' concept has
           \cnc@somany\space allocated}%
          {I will pretend you didn't ask for a symbol here.}%
%    \end{macrocode}
%    \uninteresting\begin{macrocode}
      }%
%    \end{macrocode}
% 
%  But if the number is within bounds, great! We just return the stored symbol.
% 
%    \begin{macrocode}
      {%
        \ensuremath{\cnc@g{concept(#1).option(symbols).index(##1)}}%
      }%
%    \end{macrocode}
%    \uninteresting\begin{macrocode}
    }%
%    \end{macrocode}
%
%  Now ends our |\cnc@grabnumber| command, and we supply the second argument
%  that may contain the numbers. Just in case it's empty, we make sure we
%  don't grab anything that comes after the second argument by adding a
%  |\relax|.
%
%    \begin{macrocode}
  }#2\relax%
%    \end{macrocode}
%    \uninteresting\begin{macrocode}
}
%    \end{macrocode}
%
%\end{macro}%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%



  %%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%
  % \begin{macro}{\cnc@conceptsymbols} \marg{concept key}
  %                                    \marg{separator}
  %                                    \marg{last separator}
%%%                                    \oarg{indices}\\\nopagebreak\noindentnext
% 
%  This is the private macro which takes a concept key and a
%  comma-separated list of symbol-indices and returns a
%  string-separated list of corresponding concept symbols from
%  our data-store, possibly with a different token as the last
%  separator. We use it in the public macros that offer this
%  functionality. The last argument is optional to make it
%  easier to define our `short' symbol-list command later.
%
%    \begin{macrocode}
\newcounter{cnc@separatorcount}%
\NewDocumentCommand{\cnc@conceptsymbols}{m m m O{1}}{%
  \def\cnc@result{}%
%    \end{macrocode}
%
%  \changes{0.0.6}{2012/12/29}
%    {removed unnecessary \{\} from the definition which would break
%     correct placement of subscript and superscript}
%  
%  We loop through the list of indices and produce the
%  symbols one-by-one. We use a rather ugly trick to
%  possibly have a different \meta{last separator}.
%  Each separator is stored in a separate macro, and we
%  simply redefine the last one after the loop. This causes
%  one macro to be defined for every single separator in
%  the document, but we don't care, since most of this
%  will be rewritten when we switch to \LaTeX3.
%
%    \begin{macrocode}
  \ifblank{#4}{}{%
    \def\do##1{%
      \stepcounter{cnc@separatorcount}%
      \edef\cnc@sepcsname{cnc@separator\arabic{cnc@separatorcount}}%
      \csdef{\cnc@sepcsname}{#2}%
      \expandafter\expandafter\expandafter\def\expandafter%
        \expandafter\expandafter\cnc@result\expandafter%
        \expandafter\expandafter{\expandafter\cnc@result%
        \csname\cnc@sepcsname\endcsname%
        \cnc@conceptsymbol{#1}{##1}}%
    }\docsvlist{#4}%
    \edef\cnc@sepcsname{cnc@separator\arabic{cnc@separatorcount}}%
    \csdef{\cnc@sepcsname}{#3}%
    \ensuremath{\expandafter\@gobble\cnc@result}%
  }%
%    \end{macrocode}
%    \uninteresting\begin{macrocode}
}
%    \end{macrocode}
%
%\end{macro}%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%



  %%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%
  % \begin{macro}{\cnc@nameandsymbols} \marg{concept key}
  %                                    \marg{star}
  %                                    \marg{capitalized}
  %                                    \marg{star}\\\nopagebreak
  %                                    \marg{separator}
  %                                    \marg{last separator}
%%%                                    \marg{indices}\\\nopagebreak\noindentnext
% 
%  This is the private macro which takes a concept key, a few
%  modifiers, a comma-separated list of symbol-indices and
%  custom separators and returns a separated list of the corresponding
%  concept symbols from our data-store. We use it in the public
%  macros that offer this functionality.
%
%    \begin{macrocode}
\newrobustcmd{\cnc@nameandsymbols}[7]{%
%    \end{macrocode}
%
%  We first check if any |*| modifiers were given and, if so,
%  generate an error. 
%
%    \begin{macrocode}
  \ifboolexpr{ test{\IfBooleanTF{#2}} or test{\IfBooleanTF{#4}} }{%
    \PackageError{concepts}%
    {You used the * modifier, but pluralization\MessageBreak
     will be decided by the size of the index list}%
    {I will pretend you didn't use the * modifier.}%
  }{}%
%    \end{macrocode}
%
%  We then typeset the name of the concept. We check pluralization
%  and pass along the capitalization.
%
%    \begin{macrocode}
  \cnc@csvlistsize{#7}{\cnc@symbollistsize}%
  \ifnumcomp{\cnc@symbollistsize}{=}{1}{%
    \cnc@conceptname{\BooleanFalse}{#3}{\BooleanFalse}{#1}%
  }{%
    \cnc@conceptname{\BooleanTrue}{#3}{\BooleanFalse}{#1}%
  }%
%    \end{macrocode}
%
%  Finally, we print the symbol list. We take away any whitespace
%  at the end of the name (possible if the name is itself defined
%  in terms of a public concept-name command that introduced an
%  |\xspace|) and introduce a single space of our own. 
%
%    \begin{macrocode}
  \unskip{} \cnc@conceptsymbols{#1}{#5}{#6}[#7]%
%    \end{macrocode}
%    \uninteresting\begin{macrocode}
}
%    \end{macrocode}
%
%\end{macro}%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%



%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%
% \subsection{Public Macros}                                                   %
%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%
%
%  We now implement the macros that will be used directly by package users.
%



  %%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%
%%% \begin{macro}{\NewConcept} \marg{concept key} \marg{options}\\\nopagebreak\noindentnext
%  
%  \changes{0.0.6}{2012/12/29}
%    {made the options mandatory}
%  
%  We now define the |\NewConcept| command. It should (obviously) be robust.
% 
%    \begin{macrocode}
\newrobustcmd*{\NewConcept}[2]{%
%    \end{macrocode}
% 
%  Is this concept key already defined? If so, we report a package error.
% 
%    \begin{macrocode}
  \xifinlist{#1}{\cnc@g{concepts}}{%
    \PackageError{concepts}%
      {The concept key '#1' is already taken}%
      {I will pretend that this '\protect\newconcept'%
       didn't happen.}%
  }%
%    \end{macrocode}
%
%  Otherwise, we start the actual processing of this new concept.
%
%    \begin{macrocode}
  {%
%    \end{macrocode}
% 
%  We add the concept to the concepts list in our datastore.
% 
%    \begin{macrocode}
    \listcsxadd{\cnc@d{concepts}}{#1}%
%    \end{macrocode}
% 
%  We then check which options were explicitly specified by the user.
%  This results in a set of toggles in our datastore, which may
%  be used by other code.
% 
%    \begin{macrocode}
    \DeclareRobustCommand*{\cnc@registertoggle}[1]{%
      \newtoggle{\cnc@d{concept(#1).option(##1).given}}%
      \togglefalse{\cnc@d{concept(#1).option(##1).given}}%
      \ltxkeys@newordkey[cnc@toggle]{#1}{##1}[]%
        {\toggletrue{\cnc@d{concept(#1).option(##1).given}}}%
    }%
    \cnc@registertoggle{name}%
    \cnc@registertoggle{Name}%
    \cnc@registertoggle{plural}%
    \cnc@registertoggle{Plural}%
    \cnc@registertoggle{namecmd}%
    \cnc@registertoggle{symbols}%
    \cnc@registertoggle{symbolcmd}%
    \ltxkeys@setkeys*[cnc@toggle]{#1}{#2}%
%    \end{macrocode}
% 
%  We now register the concept name options |name|, |Name|,
%  |plural| and |Plural|. This is also where we set their default values.
% 
%    \begin{macrocode}
    \ltxkeys@newordkey[cnc]{#1}{name}%
      [#1]%
      {\csdef{\cnc@d{concept(#1).option(name)}}{##1}}%
    \ltxkeys@newordkey[cnc]{#1}{Name}%
      [\cnc@upper{\cnc@g{concept(#1).option(name)}}]%
      {\csdef{\cnc@d{concept(#1).option(Name)}}{##1}}%
    \ltxkeys@newordkey[cnc]{#1}{plural}%
      [\cnc@g{concept(#1).option(name)}\unskip s]%
      {\csdef{\cnc@d{concept(#1).option(plural)}}{##1}}%
    \ltxkeys@newordkey[cnc]{#1}{Plural}%
      [\cnc@upper{\cnc@g{concept(#1).option(plural)}}]%
      {\csdef{\cnc@d{concept(#1).option(Plural)}}{##1}}%
%    \end{macrocode}
% 
%  We next register the |namecmd| option. Its default value is the
%  concept key with a |\| in front of it. Unlike most other options,
%  though, we require the option name to be explicitly given by the
%  user to actually define the macro. The following code also
%  contains the test.
% 
%    \begin{macrocode}
    \expandaftercmds{\ltxkeys@newordkey[cnc]{#1}{namecmd}%
      [}{\csname#1\endcsname}]{%
      \iftoggle{\cnc@d{concept(#1).option(namecmd).given}}{%
%    \end{macrocode}
% 
%  We register the option value as given.
% 
%    \begin{macrocode}
      	\csdef{\cnc@d{concept(#1).option(namecmd)}}{\noexpand##1}%
%    \end{macrocode}
% 
%%% \vphantom{x}\marginnote{\meta{namecmd}} \movarg{*} \movarg{\textasciicircum}
%                                           \movarg{*}
%                                           \oarg{indices}\\\nopagebreak\noindentnext
%
%  \noindent If the option is processed, we define the concept-specific
%  name command. We distinguish between two cases: whether an index-list
%  was provided or not.
% 
%    \begin{macrocode}
        \NewDocumentCommand{##1}{t* t^ t* +o}{%
          \IfValueTF{####4}{%
            \cnc@nameandsymbols{#1}{####1}{####2}{####3}%
              {,}{$ and $}{####4}%
          }{%
            \cnc@conceptname{####1}{####2}{####3}{#1}\unskip\xspace%
          }%
        }%
%    \end{macrocode}
%    \uninteresting\begin{macrocode}
      }{}%
    }%
%    \end{macrocode}
% 
%  We now register the |symbols| option. This option expects a list.
%  The callback of the following code processes it one symbol at a time.
%  And we first initialize the symbol counter to 0 in case the list is
%  empty
% 
%    \begin{macrocode}
    \csdef{\cnc@d{concept(#1).option(symbols).count}}{0}%
    \ltxkeys@newlistkey[cnc]{#1}{symbols}[]{%
%    \end{macrocode}
% 
%  We check if this particular symbol is already defined. We don't want
%  a symbol allocated to different concepts. Or allocated twice to the
%  same concept, for that matter. If all is fine, we update the symbol
%  counter for this concept, we add the symbol itself and we update
%  the reverse map we use for checking duplicates.
% 
%    \begin{macrocode}
      \ifcsundef{\cnc@d{symbol(\detokenize{##1}).concept}}{%
        \csedef{\cnc@d{concept(#1)%
                       .option(symbols)%
                       .count}}{\ltxkeys@listcount}%
        \csdef{\cnc@d{concept(#1)%
                      .option(symbols)%
                      .index(\ltxkeys@listcount)}}{##1}%
        \csedef{\cnc@d{symbol(\detokenize{##1}).concept}}{#1}%
      }%
%    \end{macrocode}
% 
%  If the symbol is already in use we report a package error.
% 
%    \begin{macrocode}
      {%
        \PackageError{concepts}%
          {The symbol '\detokenize{##1}' is already allocated
           to the '\cnc@g{symbol(\detokenize{##1}).concept}'
           concept}%
          {I will pretend that you did not
           try to add this symbol.}%
      }%
%    \end{macrocode}
%    \uninteresting\begin{macrocode}
    }%
%    \end{macrocode}
% 
%  We register the |symbolcmd| option. It does not really have a default,
%  but we give an empty default so we can test for the empty string inside.
% 
%    \begin{macrocode}
    \ltxkeys@newordkey[cnc]{#1}{symbolcmd}[]{%
      \ifblank{##1}{}{%
%    \end{macrocode}
% 
%  We register the option value as given.
% 
%    \begin{macrocode}
      	\csdef{\cnc@d{concept(#1).option(symbolcmd)}}{\noexpand##1}
%    \end{macrocode}
% 
%%% \vphantom{x}\marginnote{\meta{symbolcmd}} \momarg{index}\\\nopagebreak\noindentnext
% 
%  \noindent If the option is processed, we now define the concept-specific
%  `short' command used to typeset one or more of the allocated symbols. It
%  doesn't have a conventional argument, but it grabs all numerals following
%  it and uses that as an index to the symbol. If a number was not detected,
%  we pass control to the |\cnc@conceptsymbols| command, which is still able
%  to grab a square bracket delimited list of indices.
% 
%    \begin{macrocode}
        \newrobustcmd*{##1}{%
          \cnc@grabnumber{%
            \IfInteger{########1}{%
              \cnc@conceptsymbol{#1}{########1}%
            }{% TODO: check for square bracket (we still may want to report an error)
              \cnc@conceptsymbols{#1}{,}{,}%
            }%
          }%
        }%
%    \end{macrocode}
%    \uninteresting\begin{macrocode}
      }%
    }%
%    \end{macrocode}
% 
%  Finally, we issue the command to parse and process all options.
% 
%    \begin{macrocode}
    \ltxkeys@launchkeys[cnc]{#1}{#2}%
%    \end{macrocode}
%    \uninteresting\begin{macrocode}
  }%
}
%    \end{macrocode}
%
%\end{macro}%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%



  %%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%
  % \begin{macro}{\ConceptOption} \marg{concept key}
%%%                               \marg{option key}\\\nopagebreak\noindentnext
%
%  The point of this command is that it can retrieve any option value
%  in an expandable way. That means we can't use |xparse|, but we don't
%  need it.
% 
%    \begin{macrocode}
\newcommand*{\ConceptOption}[2]{%
  \cnc@g{concept(#1).option(#2)}%
}
%    \end{macrocode}
%
%  Unfortunately, as of writing this, not all options are stored in a
%  fully expandable way yet. But they will be in a later version. 
%
%\end{macro}%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%



  %%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%
  % \begin{macro}{\ConceptName} \movarg{*} \movarg{\textasciicircum}
  %                             \movarg{*}
%%%                             \marg{concept key}\\\nopagebreak\noindentnext
% 
%  This implementation simply calls our private macro for retrieving
%  the name in one of four forms.
%
%    \begin{macrocode}
\NewDocumentCommand{\ConceptName}{t* t^ t* m}{%
  \cnc@conceptname{#1}{#2}{#3}{#4}\unskip\xspace%
}
%    \end{macrocode}
%
%\end{macro}%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%



  %%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%
  % \begin{macro}{\ConceptSymbol} \marg{concept key}
%%%                               \oarg{index}\\\nopagebreak\noindentnext
%
%  This implementation simply calls our private macro for retrieving
%  the symbol with the given index. The index is optional and
%  defaults to 1.
%
%    \begin{macrocode}
\NewDocumentCommand{\ConceptSymbol}{m O{1}}{%
  \cnc@conceptsymbol{#1}{#2}%
}
%    \end{macrocode}
%
%\end{macro}%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%



  %%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%
  % \begin{macro}{\ConceptSymbols} \marg{concept key}
  %                                \oarg{separator}
  %                                \oarg{last separator}
%%%                                \marg{indices}\\\nopagebreak\noindentnext
%
%  This implementation simply calls our private macro for retrieving
%  the symbol list with the given indices. The index-list is mandatory
%  but can be empty.
%
%    \begin{macrocode}
\NewDocumentCommand{\ConceptSymbols}{m +O{,} +o m}{%
    \IfValueTF{#3}{%
      \cnc@conceptsymbols{#1}{#2}{#3}[#4]%
    }{%
      \cnc@conceptsymbols{#1}{#2}{#2}[#4]%
    }%
}
%    \end{macrocode}
%
%\end{macro}%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%



  %%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%
  % \begin{macro}{\ConceptNameAndSymbols} \marg{concept key}
%%%                                       \marg{indices}\\\nopagebreak\noindentnext
%
%  This implementation simply calls our private macro for typesetting
%  the concept name and the symbol list with the given indices. The
%  index-list is mandatory and cannot be empty.
%
%    \begin{macrocode}
\NewDocumentCommand{\ConceptNameAndSymbols}{t^ m +O{,} +O{$ and $} m}{%
  \cnc@nameandsymbols{#2}{\BooleanFalse}{#1}{\BooleanFalse}%
    {#3}{#4}{#5}%
}
%    \end{macrocode}
%
%\end{macro}%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%