path: root/Master/texmf-dist/source/latex/latex-lab/documentmetadata-support.dtx

% \iffalse meta-comment
%
%% File: documentmetadata-support.dtx
% Copyright (C) 2021-2022 The LaTeX Project
%
% It may be distributed and/or modified under the conditions of the
% LaTeX Project Public License (LPPL), either version 1.3c of this
% license or (at your option) any later version.  The latest version
% of this license is in the file
%
%    https://www.latex-project.org/lppl.txt
%
%
% The development version of the bundle can be found below
%
%    https://github.com/latex3/latex2e
%
% for those people who are interested or want to report an issue.
%
%    \begin{macrocode}
\def\documentmetadatasupportversion{1.0b}
\def\documentmetadatasupportdate{2022-14-04}
%    \end{macrocode}
%
%
%<*driver>
\documentclass{l3doc}
\EnableCrossrefs
\CodelineIndex
\begin{document}
  \DocInput{documentmetadata-support.dtx}
\end{document}
%</driver>
%
% \fi
%
%
%\NewDocElement[macrolike = false ,
%		 toplevel  = true,
%                idxtype   =  key  ,
%                noprint   = true  ,
%                idxgroup  = metadata keys ,
%                printtype = \textit{key}
%               ]{Mkey}{mkey}
%
%
% \title{The \texttt{documentmetadata-support} code\thanks{This file
%      has version \documentmetadatasupportversion\ dated
%      \documentmetadatasupportdate,  \copyright\ \LaTeX\
%    Project.}}
% \author{Frank Mittelbach, Ulrike Fischer, \LaTeX{} Project}
%
% \maketitle
%
%
% \section{Introduction}
%
%    The kernel command \cs{DocumentMetadata}, which can be used as
%    the very first declaration in a document (i.e., before
%    \cs{documentclass}), defines metadata and other configuration
%    data that applies to the document as a whole (using a key/value
%    syntax).
%
%    While the underlying functionality is still under
%    development (e.g., further keys will be added over time and keys
%    marked temporary may vanish again) the code for
%    \cs{DocumentMetadata} is place in a separate bundle, so that it
%    is easier to update it without the need to build a full \LaTeX{}
%    release. Over time the functionality will move fully into the
%    kernel.
%
%    From a process perspective \cs{DocumentMetadata} loads the
%    \pkg{pdfmanagement} code the first time it is called and then
%    redefines itself to only manage key/value pairs in case it is
%    called more than once. In particular, this means that a document
%    without a \cs{DocumentMetadata} declaration has no code available
%    for extended management of PDF output as needed for various
%    features developed as part of the multi-year ``Tagged PDF''
%    project~\cite{blueprint}.
%
%
%
% \section{Currently supported key/values}
%
%
% Currently the following keys are implemented for \cs{DocumentMetadata}:
% \DescribeMkey{colorprofiles}
% \DescribeMkey{debug}
% \DescribeMkey{lang}
% \DescribeMkey{pdfstandard}
% \DescribeMkey{pdfversion}
% \DescribeMkey{testphase}
% \DescribeMkey{uncompress}
%
% \begin{description}
%    \item[\texttt{backend}] Passes the backend name to expl3. This is
%      needed only if the needed backend can't be automatically
%      determined or if the workflow used requires a special backend.
%
%^^A    This will probably be extended to  pass the value also to
%^^A      packages.
%
%    \item[\texttt{pdfversion}] Sets the PDF version explicitly, e.g., \texttt{pdfversion=1.7}
%    \item[\texttt{uncompress}] (no value) Forces an uncompressed pdf
%      --- mainly for debugging purposes.
%
%    \item[\texttt{lang}] Explicitly sets the Lang entry in the Catalog,
%     e.g., \texttt{lang=de-DE}. If not given the default value used is |en-US|.
%
%    \item[\texttt{pdfstandard}] Choice key to set the pdf standard.
%      Currently |A-1b|, |A-2a|, |A-2b|, |A-2u|, |A-3a|, |A-3b|, |A-3u| and |A-4| are accepted as
%      values. The casing is irrelevant, |a-1b| works too.
%      The underlying code to ensure the requirements (as far as they
%      can be ensured) is still incomplete, but a color profile is included and the
%      \texttt{/OutputIntent} is set. The |u| variants for example do not force unicode,
%      but they will pass the information to hyperref and hyperxmp. The |a| variants
%      do \emph{not} enforce (or even test) a tagged pdf yet. The |A-4| support is
%      currently incomplete.
%      More information can be found in the documentation
%      of \pkg{l3pdfmeta}.
%
%    \item[\texttt{colorprofiles}] This allows to load icc-colorprofiles. Details
%       are described in the documentation of \pkg{l3pdfmeta}.
%
%    \item[\texttt{testphase}] This key is used to load testphase code. The values it accepts
%    and their effect will change over time, when testphase packages are added or
%    removed or when the code is moved into the kernel.
%     \begin{description}
%    \item[\texttt{phase-I}]
%       This value loads code implementing the first phase of the project~\cite{blueprint}, i.e., it
%       will load the tagpdf package. It will also activate tagging by issuing
%       |\tagpdfsetup{activate,interwordspace}|. This phase
%       is frozen.
%    \item[\texttt{phase-II}]
%       This is the current development phase.
%       Currently it differs from \texttt{phase-I} only in one point: It will
%       additionally activate tagging of paragraphs with
%       |\tagpdfsetup{paratagging}|. In the upcoming months it will
%       also enable automatic tagging of other basic document elements.
%    \end{description}
%    The |testphase| key can only be used in the first \cs{DocumentMetadata}.
%
%    \item[\texttt{debug}] This key activates some debug options. It takes a list of key-values
%    as value. Currently the following keys are known:
%     \begin{description}
%     \item[\texttt{para}] with the default and only value |show|. It will activate the |paratagging-show|
%       option of \pkg{tagpdf},
%     \item[\texttt{log}]  with the values as described in the documentation \pkg{tagpdf},
%     \item[\texttt{uncompress}] which does the same as |uncompress| as main key
%     \item[\texttt{pdfmanagement}] a boolean which allows to deactivate the pdfmanagement.
%     \item[\texttt{firstaidoff}] This accepts a comma lists of keywords and disables the patches
%       related to them. More information can be found in the documentation of
%       \pkg{pdfmanagement-firstaid}.
%    \end{description}
% \end{description}
%
% \bibliographystyle{plain}
%
% \begin{thebibliography}{9}
%
% \bibitem{blueprint} Frank Mittelbach and Chris Rowley:
%   \emph{\LaTeX{} Tagged PDF\,---\,A blueprint for a large project}.
%   \url{https://latex-project.org/publications/indexbyyear/2020/}
%
% \end{thebibliography}
%
%
%
% \MaybeStop{\setlength\IndexMin{200pt}  \PrintIndex  }
%
% \begin{implementation}
%
% \section{The Implementation}
%
%
%    \begin{macrocode}
%<@@=pdfmanagement>
%<*code>
%    \end{macrocode}
%
%    \begin{macrocode}

\RequirePackage{pdfmanagement-testphase}
%    \end{macrocode}
%
%    \begin{macrocode}
\ExplSyntaxOn\makeatletter
%    \end{macrocode}



%  \begin{macro}{\DocumentMetadata}
%
%    \cs{DocumentMetadata} should not be used after
%    \cs{documentclass} so we error in this case.
%    It can be used more than once
%     but follow-up calls should not do the initialization code.
%    \begin{macrocode}
\cs_set_protected:Npn \DocumentMetadata #1
  {
    \cs_if_eq:NNTF \documentclass \@twoclasseserror
      { \msg_error:nn { meta } { after-class } }
      {
%    \end{macrocode}
%
%    The wanted backend must be detected first, we read the init
%    key and then force the loading of the backend.
%    The backend can contain management commands, so the boolean should
%    be set to true first.
%    \begin{macrocode}
        \bool_gset_true:N \g_@@_active_bool
        \keys_set_groups:nnn { document / metadata} {init}{ #1 }
        %if no backend has been loaded force it now:
        \str_if_exist:NF \c_sys_backend_str
          {
            \sys_load_backend:n {}
          }
%    \end{macrocode}
%    Now we load the extra backend code:
%    \begin{macrocode}
        \ExplSyntaxOn\makeatletter
          \file_input:n {l3backend-testphase-\c_sys_backend_str.def}
        \ExplSyntaxOff\makeatother
%    \end{macrocode}
%    Set the default language (this requires that the backend has been loaded),
%    process the rest of the keys,
%    and setup the generic driver.
%    \begin{macrocode}
        \keys_set_filter:nnn  { document / metadata } { init } { lang=en-US, #1 }
        \bool_if:NT \g_@@_active_bool
          {
            \PassOptionsToPackage{customdriver=hgeneric-testphase}{hyperref}
          }
%    \end{macrocode}
%    \cs{pdfmanagement_add:nnn} has collected values in this hook.
%    \begin{macrocode}
        \hook_use_once:n {pdfmanagement/add}
%    \end{macrocode}
%    Now we redefine \cs{DocumentMetadata} so that it only process the
%    keys on any further calls.
%
%     We need to update the hyperref option if the active status changes.
%    \begin{macrocode}
        \cs_set_protected:Npn \DocumentMetadata ##1
          {
            \keys_set_filter:nnn  { document / metadata } { init } { ##1 }
            \str_remove_all:cn {opt@hyperref.sty}{customdriver=hgeneric-testphase}
            \bool_if:NT \g__pdfmanagement_active_bool
             {
               \PassOptionsToPackage{customdriver=hgeneric-testphase}{hyperref}
             }
          }
%    \end{macrocode}
% Load more modules, the testphase code and the firstaid code. The code is only
% loaded in the first \cs{DocumentMetadata} call!
%    \begin{macrocode}
        \g_@@_testphase_tl
        \RequirePackage{pdfmanagement-firstaid}
      }
  }
%    \end{macrocode}
%  \end{macro}




%    \begin{macrocode}
%FMi defined elsewhere
%FMi
%FMi \clist_new:N \g_@@_firstaidoff_clist
%FMi \tl_new:N \g_@@_testphase_tl
% UFi should the definition move to here?
\keys_define:nn { document / metadata }
  {
    backend .choices:nn =
      { dvipdfmx , dvips , dvisvgm , luatex , pdftex , pdfmode , xdvipdfmx , xetex }
      {
        \sys_load_backend:n {#1}
      },
    backend .groups:n = { init } ,
  }

\keys_define:nn { document / metadata }
  {
    ,pdfversion .code:n =
      {
        \pdf_version_gset:n { #1 }
        \AddToDocumentProperties[document]{pdfversion}{#1}
      }
    ,uncompress .code:n =
      {
        \pdf_uncompress:
      }
    ,uncompress .value_forbidden:n = true
    ,lang .code:n =
      {
        \pdfmanagement_add:nnn {Catalog} {Lang}{(#1)}
        \AddToDocumentProperties[document]{lang}{#1}
      }
    %,xmpmeta .bool_gset:N = \g_pdfmeta_xmp_bool %see pdfmeta unused and undefined for now!
    % this uses internal command from pdfmeta, it should probably move there ...
    ,pdfstandard .code:n =
      {
        \exp_args:Nnx
        \keys_set:nn {document / metadata} {_pdfstandard=\str_uppercase:n{#1}}
      }
    ,_pdfstandard .choices:nn =
      {A-1B,A-2A,A-2B,A-2U,A-3A,A-3B,A-3U,A-4}
      {
        \prop_if_exist:cT { g__pdfmeta_standard_pdf/#1_prop }
          {
            \prop_gset_eq:Nc \g__pdfmeta_standard_prop { g__pdfmeta_standard_pdf/#1 _prop }
          }
        \AddToDocumentProperties [document]{pdfstandard}{#1}
      }
    ,_pdfstandard / unknown .code:n =
      {
        \msg_warning:nnn{pdf}{unknown-standard}{#1}
      }
    ,testphase .multichoice:
    ,testphase / tagpdf .code:n =
      {
        \tl_gput_right:Nn\g_@@_testphase_tl
          {
            \file_if_exist_input:nF {tagpdf-latex-lab-testphase.ltx}
              {
                \RequirePackage{tagpdf}
                \AddToDocumentProperties [document]{testphase/tagpdf}{loaded}
                \tagpdfsetup{activate,paratagging,interwordspace}
                \AddToDocumentProperties [document]{tagging}{active}
                \AddToDocumentProperties [document]{tagging/para}{active}
                \AddToDocumentProperties [document]{tagging/interwordspace}{active}
              }
          }
      }
    ,testphase / unknown .code:n =
      {
        \tl_gput_right:Nn\g_@@_testphase_tl
           {
             \AddToDocumentProperties [document]{testphase/#1}{loaded}
             \file_if_exist_input:nF {#1-latex-lab-testphase.ltx}
              {
                 \msg_warning:nnn{meta}{latex-lab-pkg-missing}{#1}
                 \AddToDocumentProperties [document]{testphase/#1}{missing}
              }
           }
      }
    ,activate .multichoice:
    ,activate / tagging .code:n =
      {
        \PackageWarning{pdfmanagement-testphase}
         {The~activate~key~is~deprecated.\MessageBreak
          Tagging~is~activated~with~'testphase=tagpdf'~directly}{}
      }
    ,debug .code:n =
      {
        \keys_set:nn { document / metadata / debug } {#1}
      }
    ,debug / para .code:n =
      {
        \AddToHook
          {
            package/tagpdf/after
          }
          {
             \tagpdfsetup{paratagging-show}
          }
      }
    ,debug / log .code:n =
      {
        \AddToHook
          {
           package/tagpdf/after
          }
          {
             \tagpdfsetup{log=#1}
          }
      }
    ,debug / uncompress .code:n =
      {
        \pdf_uncompress:
      }
    ,debug / pdfmanagement .bool_gset:N = \g_@@_active_bool
    ,debug / firstaidoff .clist_gset:N = \g_@@_firstaidoff_clist
  }


%    \end{macrocode}
% \subsection{Messages}
%    \begin{macrocode}
%UFi is meta the right module name here?
\prop_gput:Nnn \g_msg_module_type_prop { meta } { LaTeX }
\prop_gput:Nnn \g_msg_module_name_prop { meta } { DocumentMetadata }

\msg_new:nnn { meta } { after-class }
             {
                \token_to_str:N \DocumentMetadata \c_space_tl
                should~be~used~only~before~\token_to_str:N\documentclass
             }
\msg_new:nnn { meta } { latex-lab-pkg-missing }
             {
               LaTeX-lab~package~'#1'~not~found.
              }
%    \end{macrocode}
%
%    \begin{macrocode}
\ExplSyntaxOff\makeatother
%    \end{macrocode}
%
%
%    \begin{macrocode}
%</code>
%    \end{macrocode}
%
% \end{implementation}
%
% \Finale
%