path: root/Master/texmf-dist/source/latex/cybercic/cybercic.dtx

% \iffalse meta-comment
% Copyright (c) 2015 Jared Jennings <jjennings@fastmail.fm>
%
% Permission is hereby granted, free of charge, to any person
% obtaining a copy of this software and associated documentation
% files (the "Software"), to deal in the Software without
% restriction, including without limitation the rights to use, copy,
% modify, merge, publish, distribute, sublicense, and/or sell copies
% of the Software, and to permit persons to whom the Software is
% furnished to do so, subject to the following conditions:
%
% The above copyright notice and this permission notice shall be
% included in all copies or substantial portions of the Software.
%
% THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND,
% EXPRESS OR IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES OF
% MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND
% NONINFRINGEMENT. IN NO EVENT SHALL THE AUTHORS OR COPYRIGHT HOLDERS
% BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY, WHETHER IN AN
% ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING FROM, OUT OF OR IN
% CONNECTION WITH THE SOFTWARE OR THE USE OR OTHER DEALINGS IN THE
% SOFTWARE.
% \fi
%
% ^^A We cannot \usepackage{cybercic}, because it is a horrible hack.
% ^^A Therefore we do not get \filedate and \fileversion for free.
% \def\filedate{2015/03/21}
% \def\fileversion{v2.0}
% \iffalse
%<package>\NeedsTeXFormat{LaTeX2e}
%<package>\ProvidesPackage{cybercic}
%<package>   [2015/03/21 Bumped version to match cyber]
%
%<*driver>
\documentclass{ltxdoc}

\usepackage{verbatim}



% Make PDF magic happen.
% Thanks, Patrick Joeckel:
% http://www.mpch-mainz.mpg.de/~joeckel/pdflatex/
% Note that I expect always to use pdflatex, not latex+dvipdf
\usepackage[bookmarks=true,bookmarksnumbered=true,breaklinks=true,pdftex]{hyperref}
\hypersetup{
    colorlinks=false,
    linkbordercolor={0.7 0.7 1.0}
}

\EnableCrossrefs
\RecordChanges
\CodelineIndex

\begin{document}
  \DocInput{cybercic.dtx}
\end{document}
%</driver>
% \fi
%
% \CheckSum{0}
%
% \CharacterTable
%  {Upper-case    \A\B\C\D\E\F\G\H\I\J\K\L\M\N\O\P\Q\R\S\T\U\V\W\X\Y\Z
%   Lower-case    \a\b\c\d\e\f\g\h\i\j\k\l\m\n\o\p\q\r\s\t\u\v\w\x\y\z
%   Digits        \0\1\2\3\4\5\6\7\8\9
%   Exclamation   \!     Double quote  \"     Hash (number) \#
%   Dollar        \$     Percent       \%     Ampersand     \&
%   Acute accent  \'     Left paren    \(     Right paren   \)
%   Asterisk      \*     Plus          \+     Comma         \,
%   Minus         \-     Point         \.     Solidus       \/
%   Colon         \:     Semicolon     \;     Less than     \<
%   Equals        \=     Greater than  \>     Question mark \?
%   Commercial at \@     Left bracket  \[     Backslash     \\
%   Right bracket \]     Circumflex    \^     Underscore    \_
%   Grave accent  \`     Left brace    \{     Vertical bar  \|
%   Right brace   \}     Tilde         \~}
%
% \changes{v1.0}{2011/11/02}{Split off from iadoc}
% \changes{v1.1}{2012/06/07}{Made skiacic into a \LaTeX\ package}
% \changes{v1.2}{2012/12/17}{Renamed skiacic to iacic}
% \changes{v1.3}{2015/03/11}{Renamed iacic to cybercic; changes for suitability on CTAN}
% \changes{v2.0}{2015/03/21}{Bumped version to match \textsf{cyber}}
%
% \title{The \textsf{cybercic} package\thanks{This document corresponds to
%   \textsf{cybercic}~\fileversion, dated~\filedate.}}
% \author{Jared Jennings \\ \texttt{jjennings@fastmail.fm}}
%
% \maketitle
% \tableofcontents
% \clearpage
%
%
% \section{What's it for?}
%
% This package, when used in conjunction with \textsf{cyber}, adds IA control
% names to division names in the table of contents. (The \textsf{cic} stands
% for ``controls in contents.'' \emph{Division} means chapter, section,
% subsection, subsubsection, etc.)
%
% As an example, suppose you have a section in your document like this:
%
% \begin{verbatim}
% \section{Stuff about individual authentication}
%
% \documents{iacontrol}{IAIA-1} Bla, bla, bla...
% \end{verbatim}
%
% Without \textsf{cybercic}, this creates a line in your table of contents that
% says something like, ``3.2 Stuff about individual authentication ..... 34,''
% and a section heading in the body of the document, on (in our example) page
% 34, that says something like, ``3.2 Stuff about individual authentication.''
%
% When you add \textsf{cybercic}, the line in your table of contents will say,
% ``3.2 Stuff about individual authentication (IAIA-1) ... 34.'' The section
% head in the body of the document will stay the same.
%
%
% \section{How to use it}
%
% In the preamble of your document, write |\usepackage{cybercic}|. But! You must
% be careful where you write it. If you use \textsf{hyperref}, you must use
% \textsf{cybercic} \emph{after} \textsf{hyperref}. You must use
% \textsf{cybercic} after \textsf{cyber}, as well.
%
% \DescribeMacro{\Cybercontrolsincontentsenabledfalse}
%
% \DescribeMacro{\Cybercontrolsincontentsenabledtrue}
%
% If there is a part of your document wherein you do not want section titles in
% the table of contents changed, at the beginning of that part write
% |\Cybercontrolsincontentsenabledfalse|. When you want controls-in-contents
% re-enabled, write |\Cybercontrolsincontentsenabledtrue|.
%
%
% \section{Caveats}
%
% First and foremost, when you use this package, and you also use
% \textsf{hyperref} to make a PDF with bookmarks in it, you cannot put
% \emph{any} formatting in your section titles. This means you cannot write
% something like:
%
% \begin{verbatim}
% \section{My \emph{Awesome} Section}
% \section{The {\tt /usr/var/tmp} directory}
% \end{verbatim}
%
% You must content yourself with:
%
% \begin{verbatim}
% \section{My Awesome Section}
% \section{The /usr/var/tmp directory}
% \end{verbatim}
%
% This package is a horrible (but ingenious) hack. Do not use it unless you
% really, really need to. It may not play well with other packages.
%
% If a section spans multiple pages, and compliance posture tags (like
% |\documents| or |\implements|, see \textsf{cyber} documentation) are strewn
% throughout, running page heads containing section names will only show IA
% control names mentioned before the page began. Patches gratefully accepted.
%
%
% \section{Implementation}
%
% \StopEventually{}
%
%    \begin{macrocode}
\makeatletter
%    \end{macrocode}
%
% Given that we are using controlsincontents, sometimes it needs to be disabled
% for part of a document. The newif here is for that purpose.
% \begin{macro}{\Cybercontrolsincontentsenabledtrue}
% \begin{macro}{\Cybercontrolsincontentsenabledfalse}
%    \begin{macrocode}
\newif\ifCybercontrolsincontentsenabled
\Cybercontrolsincontentsenabledtrue
%    \end{macrocode}
% \end{macro}
% \end{macro}
%
% The word ``division'' here is a general term for a part, chapter, section,
% subsection, subsubsection, paragraph, or subparagraph.
%
% Every kind of division has an optional argument, what should show in the
% table of contents instead of the title shown in the text. Our strategy is to
% set that optional toc name to a reference to a macro. The macro is first
% defined to contain the original name of the section, but it can be redefined
% later in the document to tack text onto the end of it.
%
% \url{http://www.elektro.uni-miskolc.hu/~gati/references/latex/macro/tugpap1.pdf}
% introduces this sort of indirection.
%
% Only the last definition of the division's title macro that appeared in the
% document is expanded when the |.toc| file is written. So the table of
% contents then contains all the additions to the division's title as well as
% the title itself. Unfortunately, at the part of the document where the
% division title is typeset in the text, none of the redefinitions have
% happened yet, so only the title which shows in the TOC can be amended using
% this method.
%
% We need to name the macro that will contain each division's title. Each name
% must be unique, so we use the counters for different kinds of sections; but
% each name must also be a valid identifier, so instead of using numbers we use
% letters. (Alph bombs out after it gets to number 26, so Roman it is.)
%    \begin{macrocode}
\newcommand \alphpart          {pt\Roman{part}}
\ifdefined\chapter
\newcommand \alphchapter       {\alphpart ch\Roman{chapter}}
\newcommand \alphsection       {\alphchapter se\Roman{section}}
\else
\newcommand \alphsection       {\alphpart se\Roman{section}}
\fi
\newcommand \alphsubsection    {\alphsection su\Roman{subsection}}
\newcommand \alphsubsubsection {\alphsubsection ss\Roman{subsubsection}}
\newcommand \alphparagraph     {\alphsubsubsection p\Roman{paragraph}}
\newcommand \alphsubparagraph  {\alphparagraph sp\Roman{subparagraph}}
%    \end{macrocode}

% Now we're going to replace |\@sect|. This macro is used for all divisions
% |\section| and smaller. 
%    \begin{macrocode}
\let\skia@orig@sect\@sect
\gdef\@sect#1#2#3#4#5#6[#7]#8{%
    \ifCybercontrolsincontentsenabled
%    \end{macrocode}
% \#1 is the kind of division, e.g. section or subparagraph. \#2 is the depth
% of this kind of division in the hierarchy (1 is a chapter, 2 is a
% section, etc)
%    \begin{macrocode}
    \ifnum #2>\c@tocdepth
%    \end{macrocode}
% The kind of division we're starting is too detailed to show up in the
% table of contents. Just do the usual |@sect| thing. (Before this special
% case was written, any use of |\subsubsection| resulted in an
% |\inaccessible| error.)
%    \begin{macrocode}
      \skia@orig@sect{#1}{#2}{#3}{#4}{#5}{#6}[#7]{#8}
%    \end{macrocode}
% A side effect of not redefining |\last@division| and |\last@divtitle| here
% as we do below is that any |\addtosectionname|s that happen will add to
% the name of the last-declared TOC-worthy division - which will be a
% larger division that contains this one.
% 
% For example, assume |\setcounter{tocdepth}{1}|, i.e. only chapters are
% shown in the TOC. Now if we |\chapter{One}| |\section{Onedotone}|
% |\addtosectionname{Bla}|, Bla will be added to One, not onto Onedotone.
%    \begin{macrocode}
    \else
%    \end{macrocode}
% This division will show up in the TOC. Prepare it to have text added
% onto its name there.
% Let's capture a unique name for the section being created:
%    \begin{macrocode}
      \edef\last@division{#1\csname alph#1\endcsname}
%    \end{macrocode}
% (An example expansion would be paragraphptchseIsussIIp.)
% Now we construct a name for a macro which will contain the title of this
% section.
%    \begin{macrocode}
      \edef\last@divtitle{\csname titleof\last@division \endcsname}
      \edef\last@divaddedto{\csname addedto\last@division \endcsname}
%    \end{macrocode}
% Now we define that macro. The expandafter causes |\last@divtitle| to be
% expanded before the |\def|, so that we are not defining |\last@divtitle|, but
% the thing it expands to---in our example, we are defining
% |\titleofparagraphptchseIsussIIp|. Mind-bending, eh?
%    \begin{macrocode}
      \expandafter\def\last@divtitle{#7}
%    \end{macrocode}
% Now we call the old |@sect|, giving |\last@divtitle| as the section title to
% use in the table of contents. But we don't want to expand it right now,
% because it would just expand to \#7. So we put a |\noexpand| first. But we
% don't want its value to be exactly ``|\last@divtitle|'', because that
% one gets redefined all the time, and only the last definition would be
% used in writing the toc file, so the name of every section in the toc
% would end up the same... This expansion stuff is a bit fiddly, isn't
% it? So instead of using |\last@divtitle|, as above, we have to write
% its expansion out here.
% \begin{macrocode}
      \skia@orig@sect{#1}{#2}{#3}{#4}{#5}{#6}[\noexpand\csname titleof\last@division\endcsname]{#8}
    \fi
    \else
%    \end{macrocode}
% If we're in this |else|, Cybercontrolsincontentsenabled is not true. Just do
% the usual section thing.
%    \begin{macrocode}
      \skia@orig@sect{#1}{#2}{#3}{#4}{#5}{#6}[#7]{#8}
    \fi}
%    \end{macrocode}
%
% And we need to add the same machinery to |\@chapter|---if it exists. (Some
% document classes do not define it.)
%    \begin{macrocode}
\ifdefined\@chapter
\let\skia@orig@chapter\@chapter
\gdef\@chapter[#1]#2{%
    \ifCybercontrolsincontentsenabled
    \edef\last@division{chapter\alphchapter}
    \edef\last@divtitle{\csname titleof\last@division \endcsname}
    \edef\last@divaddedto{\csname addedto\last@division \endcsname}
    \expandafter\def\last@divtitle{#1}
    \skia@orig@chapter[\noexpand\csname titleof\last@division\endcsname]{#2}
    \else
    \skia@orig@chapter[#1]{#2}
    \fi}
\fi % defined @chapter
%    \end{macrocode}
%
%
% Fix PDF bookmarks by using the expansion of the title macro, not its name.
%
% When you use \textsf{hyperref} and you tell it to make PDF bookmarks, the
% bookmarks it writes to the PDF file have to have very normal sorts of names.
% I think you may get to use UTF-8, but you can't have any text formatting.
% The way hyperref makes sure of this is by temporarily defining all of the
% \LaTeX\ formatting macros you may want to use, like |\textsf|, to do nothing,
% so that they expand to their contents rather than some \TeX\ code that makes
% the formatting happen plus the contents, and then evaluating the line that's
% supposed to go in the table of contents (the optional argument to |\@section|
% or |\@chapter| which defaults to the first argument) expanding only those
% macros. As I recall. It's been six months since I figured it out.
%
% But we've set the section name as it should appear in the contents to a
% macro, and not a macro that \textsf{hyperref} is prepared for. So the PDF
% bookmark for section 1.2 which begins on page 4 says
% |1.2 \titleofsectionptchseI  4|
% instead of |1.2 My Cool Section (IAIA-1)  4|.
%
% Our hamfisted solution to this is to go ahead and fully expand the parameter.
% That means that the |\titleofsectionptchseI| macro is expanded, to ``My Cool
% Section (IAIA-1).'' But it also means that all of those guards that hyperref
% had to deal with what happens if I write
% |\section{My \emph{Awesome} Section}|
% are gone, and suddenly if there is any formatting in any section names, bad
% things happen. So this is the part of the code that necessitates that all
% division titles have no formatting in them at all.
%
% Most of this definition of addcontentsline comes from the hyperref package.
% For this to work properly, cyber must be loaded \emph{after} hyperref.
%    \begin{macrocode}
\@ifpackageloaded{hyperref}{%
    \gdef\addcontentsline#1#2#3{% toc extension, type, tag
      \begingroup
        \let\label\@gobble
        \let\textlatin\@firstofone
        \ifx\@currentHref\@empty
          \Hy@Warning{%
            No destination for bookmark of \string\addcontentsline,%
            \MessageBreak destination is added%
          }%
          \phantomsection
        \fi
        \expandafter\ifx\csname toclevel@#2\endcsname\relax
          \begingroup
            \def\Hy@tempa{#1}%
            \ifx\Hy@tempa\Hy@bookmarkstype
              \Hy@WarningNoLine{bookmark level for unknown #2 defaults to 0}%
            \else
              \Hy@Info{bookmark level for unknown #2 defaults to 0}%
            \fi
          \endgroup
          \expandafter\gdef\csname toclevel@#2\endcsname{0}%
        \fi
        \edef\Hy@toclevel{\csname toclevel@#2\endcsname}%
%    \end{macrocode}
% Unlike hyperref, expand \#3 so we don't try to use a macro name as the
% title of the bookmark. But \#3 is likely a |\numberline{...}|, and at
% the time this is expanded, it seems that |\numberline| is some LaTeXy
% thing, not a hyperreffy thing, and hyperref complains about all the
% TeX code in the expansion of \#3. So we make sure that \numberline is
% going to just put the number in.
%    \begin{macrocode}
        \let\saved@numberline\numberline
        \ifHy@bookmarksnumbered
          \let\numberline\Hy@numberline
        \else
          \let\numberline\@gobble
        \fi
        \edef\Hy@expandedtag{#3}
        \let\numberline\saved@numberline
%    \end{macrocode}
% Now, about writing that bookmark.
%    \begin{macrocode}
    \Hy@writebookmark{\csname the#2\endcsname}%
          {\Hy@expandedtag}%
          {\@currentHref}%
          {\Hy@toclevel}%
          {#1}%
        \ifHy@verbose
          \typeout{pdftex: bookmark at \the\inputlineno:
            {\csname the#2\endcsname}
            {\Hy@expandedtag}
            {\@currentHref}%
            {\Hy@toclevel}%
            {#1}%
          }%
        \fi
        \addtocontents{#1}{%
          \protect\contentsline{#2}{#3}{\thepage}{\@currentHref}%
        }%
      \endgroup
    }
}

%    \end{macrocode}
% That blank line just above seems to be necessary.
%
% To avoid restating IA controls in appended-to section names, we'll need a
% substring search function.
%
% From the substr package, version 1.2, 2009/10/20, copyright 2000, 2005, 2009
% Harald Harders, available from CTAN:
%
% ---
%
% expands the first and second argument with
% |\protected@edef| and calls \#3 with them:
%    \begin{macrocode}
\newcommand\su@ExpandTwoArgs[3]{%
  \protected@edef\su@SubString{#1}%
  \protected@edef\su@String{#2}%
  \expandafter\expandafter\expandafter#3%
  \expandafter\expandafter\expandafter{%
    \expandafter\su@SubString\expandafter
  }\expandafter{\su@String}%
}
%    \end{macrocode}
% tests if \#1 in \#2. If yes execute \#3, else \#4
%    \begin{macrocode}
\newcommand*\IfSubStringInString[2]{%
  \su@ExpandTwoArgs{#1}{#2}\su@IfSubStringInString
}
\newcommand*\su@IfSubStringInString[2]{%
  \def\su@compare##1#1##2\@nil{%
    \def\su@param{##2}%
    \ifx\su@param\@empty
      \expandafter\@secondoftwo
    \else
      \expandafter\@firstoftwo
    \fi
  }%
  \su@compare#2\@nnil#1\@nil
}
%    \end{macrocode}
%
% ---
%
% End substr package excerpt.
%
% Now, to append some text to the name of the section we're in, we just have to
% redefine the macro whose name is the value of |\last@divtitle|. In order to add
% to it without infinite recursion, we use |\edef|, which expands its body before
% defining. Again, rather than defining |\last@divtitle| itself, we want to
% define the macro it names. The expandafter does this.
%
%    \begin{macrocode}
\def\addtosectionname#1{%
    \def\skia@yes{yes}
    \expandafter\ifx\last@divaddedto\skia@yes
      \IfSubStringInString{#1}{\last@divtitle}{}{%
        \expandafter\edef\last@divtitle{\last@divtitle , #1}%
      }
    \else
      \expandafter\edef\last@divtitle{\last@divtitle ---#1}
    \fi
    \expandafter\def\last@divaddedto{yes}}

\makeatother
%    \end{macrocode}
% \Finale