path: root/Master/texmf-dist/source/latex-dev/latex-lab/latex-lab-footnotes.dtx

% \iffalse meta-comment
%
%% File: latex-lab-footnotes.dtx
% Copyright (C) 2022 The LaTeX Project
%
% It may be distributed and/or modified under the conditions of the
% LaTeX Project Public License (LPPL), either version 1.3c of this
% license or (at your option) any later version.  The latest version
% of this license is in the file
%
%    https://www.latex-project.org/lppl.txt
%
%
% The development version of the bundle can be found below
%
%    https://github.com/latex3/latex2e/required/latex-lab
%
% for those people who are interested or want to report an issue.
%
%<*driver>
\documentclass{l3doc}
\EnableCrossrefs
\CodelineIndex
\begin{document}
  \DocInput{latex-lab-footnotes.dtx}
\end{document}
%</driver>
%
% \fi
%
%
% \title{The \texttt{latex-lab-footnotes} code\thanks{}}
% \author{Frank Mittelbach, \LaTeX{} Project}
%
% \maketitle
%
% \newcommand\fmi[1]{\begin{quote} TODO: \itshape #1\end{quote}}
% \newcommand\NEW[1]{\marginpar{\mbox{}\hfill\fbox{New: #1}}}
% \providecommand\class[1]{\texttt{#1.cls}}
% \providecommand\pkg[1]{\texttt{#1}}
% \providecommand\hook[1]{\texttt{#1}}
%
% \begin{abstract}
%   \emph{to be written}
% \end{abstract}
%
% \tableofcontents
%
%
% \section{Introduction}
%
%    This code reimplements the footnote interfaces for \LaTeX{}
%    offering configurable methods for layout and functionality
%    adjustments that avoid overwriting each other when used in
%    classes as well as in packages (as far as possible --- obviously
%    some adjustments are mutally exclusive). This is achieved by
%    providing a a larger number of hooks (for areas where different
%    packages/classes can easily coexist with their adjustments) and a
%    number of configuration points to which only one class or package
%    can write to successfully (in case of multiple changes the the
%    last one wins). The latter are for special functionality, e.g.,
%    if footnote text is typeset as a single paragraph, it can't be configured
%    the same time to be typeset vertically with one footnote below
%    each other.
%
%    The interfaces are  set up to support tagged PDF, but in order
%    for this to work, all packages altering the fontnote setup should
%    use the inferfaces provided here and not do it through the
%    legacy methods (though there is some support for the latter as
%    well, but if will not work in a cases).
%
% \subsection{Configuration methods}
%
%    Historically, the footnote setup in \LaTeX{} was done by
%    providing definitions for \cs{@makefnmark} (format the footnote
%    mark in running text and in front of the footnote text) and
%    \cs{@makefntext} (formatting the footnote text and placing a mark
%    in front of it).
%
%    There was a default definition for \cs{@makefnmark} in the format
%    that was used by most document classes,
%    but \cs{@makefntext} had to be defined in the class itself because
%    the format didn't provide a default. As a result you will find
%    definitions for the latter in all document classes and defintions
%    for \cs{@makefnmark} only in very few.
%
%    Furthermore, to enable special footnote layouts or provide
%    additional functionality a few packages (and a few classes)
%    overwrote other internal commands of \LaTeX's footnote
%    mechanism. The commands affected in this way are mainly
%    \cs{@footnotemark} and \cs{@footnotetext}. These overwrites could
%    not be used in combination, so either the packages/classes had to
%    be aware of being loaded together (which they sometimes did or
%    tried to) or they would fail by overwriting each other
%    unconditionally.
%
%    The present rewrite is an attempt to improve this situation, but
%    of course, it will only work if all packages/classes make use of
%    the new interfaces. Fortunately, the number of problematical
%    packages altering these internal commands are fairly small so
%    arranging for updates is a realistic goal --- to achieve properly
%    tagged PDF it is a requirement.
%
%
%
% \section{Hooks and configuration points}
%
%    Note: the configuration points do not have an interface mechanism
%    yet and all their names are temporary right now.
%    Also note that configuration points are of interest only to very
%    few specialized packages, mainly \pkg{footmisc}, and packages
%    providing similar functionality---the current documentation is
%    therefore fairly sketchy.
%
%    In contrast the hooks are of interest to many classes to provide
%    their layout alterations in a way that it works smoothly with
%    other packages handling aspects of foonote formatting.
%
%
% \subsection{Formatting the mark in the main text}
%
%    This implements formatting the mark\footnote{Like this one.} and
%    its relation to surrounding text, e.g., if several marks appear
%    in the same place, etc.
%
%
% \subsubsection{Configuration points}
%
%    None: everything is implemented through a single definition for
%    \cs{@footnotemark} that offers a number of hooks that can be used
%    by packages to implement handling of multiple marks and the
%    formatting of marks.
%
%
% \subsubsection{Hooks}
%
%    The hooks to customize the marks in the text are the following:
%    \begin{description}
%    \item[\hook{fnmark/before}]
%
%      Executed at the very beginning of \cs{footnotemark}. Currently
%      there are two packages (\pkg{bibarts} and \pkg{chextras}) that
%      prepend material at this point (not ncessarily correctly, e.g.,
%      they do not all check that they are in horizontal mode).
%
%      This hook is paired with hook \hook{fnmark/after}.
%
%    \item[\hook{fnmark}]
%
%      Executed in horizontal mode and after the current space factor
%      has been saved away for reuse. This is where currently code for multiple
%      marks does its preparation (as done by \pkg{footmisc} and
%      others).
%
%      The hook is only executed in hmode, i.e., not if the mark is
%      generated in math --- maybe that means the multiple handling
%      should happen later?
%
%      After the hook \cs{nobreak} is executed, so any
%      ``material'' added in the hook is tied to the following mark
%      unless it contains its own permissible penalty.
%
%    \item[\hook{fnmark/begin}]
%
%      This hook is executed directly in front of the typeset mark.
%      This is the place where \pkg{hyperref} adds part of its code,
%      i.e., after the \cs{nobreak} mentioned above. With a closer
%      integration of \pkg{hyperref} this hook may not be necessary at
%      all.
%
%    \item[\hook{fnmark/end}]
%
%      This hook is executed directly after the typeset mark. It is
%      used by \pkg{hyperref}, \pkg{memhfixc}, \pkg{scrlttr2}, and
%      \pkg{footmisc}. Used, for example, to implement support for
%      multiple marks in succession.
%
%      It is \emph{not} a reversed hook.
%
%
%    \item[\hook{fnmark/after}]
%
%      This hook is executed at the very end of the \cs{footnotemark} command.
%
%      It is a reversed  hook to pair with \hook{fnmark/before}
%    \end{description}
%
%
%
%
% \subsubsection{Additional configuration possibilities}
%
%    The actual formatting is done through \cs{@makefnmark} --- no
%    special customization support for now.
%
%
%
% \subsection{Formatting the footnote text}
%
%    This implements the formatting of the footnote text the way it
%    appears at the bottom of the page (default case), or possibly
%    elsewhere, e.g. in the margin.
%
% \subsubsection{Configuration points}
%
%    To cater for different layout configurations there are four
%    configuration points which can be set only by one package or
%    class, if two packages/classes set them they are mutually
%    incompatible.
%    These are:
%    \begin{description}
%    \item[\cs{@footnotetext@cfgpoint} (1 argument)]
%
%      This receives all material that is to be processed (or stored)
%      including color protection code and what have you.  The default
%      definition is to run \cs{insert}\cs{footins}.
%
%    \item[\cs{@footnotetext@cfgpointii}  (1 argument)]
%
%      The default definition runs \cs{@makefntext} which contains
%      various hooks for customization. For most scenarios this is
%      sufficient. However, when running all footnotes as a single
%      paragraph at the bottom, then each footnote needs to be
%      prepared prior to storing in the insert and this configuration
%      point allows running extra code to do that.
%
%    \item[\cs{@footnotetext@cfgpointiii} (no argument)]
%
%      By default this configuration point adds a strut to the
%      footnote material. so that consecutive footnotes are properly
%      spaced vertically. In some use cases this is not appropriate
%      (e.g., when running all footnotes s a single paragraph) and so
%      this configuration point can cancel the action or do something
%      else instead.
%
%      The configuration point is executed near the start of the
%      argument for the configuration point
%      \cs{@footnotetext@cfgpointii}.
%
%    \item[\cs{@footnotetext@cfgpointiv} (no argument)]
%
%      This configuration point is executed at the very end of the
%      argument passed to  \cs{@footnotetext@cfgpointii}.
%      By default it adds a final strut as long as we are still in
%      horizontal mode (i.e., processing the footnote text paragraph.
%      When running several footnotes in one paragraph some additional
%      material (some horizontal glue) needs adding at this point.
%
%    \end{description}
%    The configuration point \cs{@footnotetext@cfgpointii} runs
%    \cs{@makefntext} and this command contains two further
%    configuration points (and a few hooks):
%    \begin{description}
%    \item[\cs{@makefntext@cfgpoint} (1 argument)]
%
%      This configuration point receives the material to typeset the
%      footnote mark. By default, all it does is running \cs{indent}
%      to get a paragraph indentation (if one is set up---in most
%      layouts it is 0~points)  and then typesets the mark, but in
%      some designs it executes more elaborate code.
%
%      If tagging is produced this configuration point is also
%      responsible for surrounding the mark with the appropriate tags
%      marking the mark as an Lbl. It does this using the command \cs{tag@FELbl}.
%
%    \item[\cs{@makefntext@cfgpointii} (1 argument)]
%
%      This configuration point manages the formatting of the footnote
%      text once the mark has been typeset. 
%
%      If tagging is produced this configuration point is also
%      responsible for surrounding the mark with the appropriate tags
%      marking the mark as an MC of type FENote. It does this using
%      the command \cs{tag@FENote}.
%
%    \end{description}
%
%
%    The above configuration points are sufficient to implement all
%    commonly used footnote layouts assuming L-R typesetting. For R-L
%    typesetting they or may or may not need some extension (though
%    that is not clear right now).
%
%
%
% \subsubsection{Hooks}
%
%    \begin{description}
%    \item[\hook{fntext/before}]
%
%      Executed at the very beginning of \cs{footnotetext}. Currently
%      there is on package (\pkg{linguex}) that
%      prepends material at this point.
%
%      This hook is paired with hook \hook{fnmark/after}.
%
%    \item[\hook{fntext}]
%
%      Executed at the beginning of the material passed to the first
%      configuration point.  Typically used to set any baseline
%      stretch for the footnote text, e.g., by \pkg{setspace},
%      \pkg{footmisc}, \class{uathesis} and others. Could be done in a
%      later hook but is a bit more efficient here.
%
%      After the hook has run, the font is established, i.e., it can't
%      be used to set a different font size.
%
%    \item[\hook{fntext/para}]
%
%      After the font is set default paragraph parameters are set up
%      including \cs{interlinepenalty}, \cs{hsize}, \cs{parindent} and
%      a number of others, as some of them depend on the font
%      size. Then the \hook{fntext/para} is run. If one wants to
%      change the font size, it is probably necessary to reset these
%      other parameters too, e.g., \cs{parindent}, which can be done
%      here.
%
%      The configuration point \cs{@footnotetext@cfgpointii} normally
%      runs the command \cs{@makefntext} or some code that eventually
%      runs this command, and this then produces the footnote mark (in
%      front of the footnote text) and the formatted footnote text. In
%      front of both the mark and the footnote text some classes have
%      placed paragraph parameter adjustments in their redefinition of
%      \cs{@makefntext}. However, there is no need to place it there
%      it could equally well go into the \hook{fntext/para} hook. We
%      therefore do not provide another hook at this point.
%
%    \item[\hook{fntext/begin} \& \hook{fntext/end}]
%
%      The footnote text itself is surrounded by the hooks
%      \hook{fntext/begin} and \hook{fntext/end}. The two hooks are
%      not paired as they are typically used independently.
%
%    \item[\hook{fntext/after}]
%
%      At the very end of \cs{footnotetext} we execute the hook
%      \hook{fntext/after} which is a reversed hook paired with
%      \hook{fntext/before}. Some packages, e.g., \pkg{linuex}, have
%      code in that position.
%
%    \end{description}
%
%
%
%
% \subsubsection{Additional configuration possibilities}
%
%    The formatting of the footnote mark in front of the footnote
%    texts is influenced by the setting of the dimen parameter
%    \cs{footnotemargin}. By default its value is 1.8em in the current
%    text font (or \texttt{-}\cs{maxdimen} when the para option is
%    chosen). The following rules apply:
%    \begin{itemize}
%    \item
%
%      If it has the value \texttt{-}\cs{maxdimen} then the mark is
%      generated by \cs{@makefnmark}.
%
%    \item
%
%      Otherwise, if the value is
%      negative then the mark is placed into an \cs{llap} left aligned
%      in a box of size \texttt{-}\cs{footnotemargin}.
%
%    \item
%
%      If the value is zero an \cs{llap} is used without an inner box.
%
%    \item
%
%      If the value is greater zero (but less than \cs{maxdimen}) the
%      mark is placed right aligned into a box of size
%      \cs{footnotemargin}.
%
%    \item
%
%      The value \cs{maxdimen} is used as a marker to indicate that
%      no value was given and that the default should be used,
%      i.e. 1.8em or \texttt{-}\cs{maxdimen} depending on the chosen
%      option.
%    \end{itemize}
%
%
% \section{Tagging support}
%
%  \emph{To be documented}
%
%
%
%
% \MaybeStop{\setlength\IndexMin{200pt}  \PrintIndex  }
%
%
% \section{The Implementation}
%
%    All this is very rough and misses a lot of documentation.
%
%    \begin{macrocode}
%<*kernel>
%<@@=fnote>
%    \end{macrocode}
%
% \subsection{File declaration}
%    \begin{macrocode}
\ProvidesFile{latex-lab-footnotes.ltx}
        [2022-07-22 v0.6b changes to the footnote interfaces]
%    \end{macrocode}
%
%    \begin{macrocode}

% latex.ltx

        % not looked at yet

\long\def\@mpfootnotetext#1{%
  \global\setbox\@mpfootins\vbox{%
    \unvbox\@mpfootins
    \reset@font\footnotesize
    \hsize\columnwidth
    \@parboxrestore
    \def\@currentcounter{mpfootnote}%
    \protected@edef\@currentlabel
         {\csname p@mpfootnote\endcsname\@thefnmark}%
    \color@begingroup
      \@makefntext{%
        \rule\z@\footnotesep\ignorespaces#1\@finalstrut\strutbox}%
    \par
    \color@endgroup}}


\def\@makefnmark{\hbox{\@textsuperscript{\normalfont\@thefnmark}}}



\def\@mpfn{footnote}
\def\thempfn{\thefootnote}



%-------------------------------------


\ExplSyntaxOn


\cs_new_protected:Npn \fnote_step_fnmark:nn #1#2 {
  \tl_if_novalue:nTF {#1}
    {
      \stepcounter {#2}
      \protected@xdef \@thefnmark { \use:c { the#2 } }
    }
    {
     \group_begin:
%    \end{macrocode}
%    Note that this is a local assignment even though \LaTeX{}
%    counters are normally globally changed. This is the way it was in
%    2e and so far we haven't changed it. The alternative would be to
%    store the current value and restore it after \cs{@thefnmark} is
%    altered.
%    \begin{macrocode}
        \int_set:cn { c@#2 }{ #1 }
        \unrestored@protected@xdef \@thefnmark { \use:c { the#2 } }
     \group_end:
    }
}

\cs_new_protected:Npn \fnote_set_fnmark:nn #1#2 {
  \tl_if_novalue:nTF {#1}
    {
      \protected@xdef \@thefnmark { \use:c { the#2 } }
    }
    {
     \group_begin:
        \int_set:cn { c@#2 }{ #1 }
        \unrestored@protected@xdef \@thefnmark { \use:c { the#2 } }
     \group_end:
    }
}

%-------------------------------------

% the debugging code is just temp
\bool_new:N \g_fnote_debug_bool
\bool_gset_true:N  \g_fnote_debug_bool   % for now we have debugging turned on by default

%-------------------------------------



\NewMirroredHookPair{fnmark/before}{fnmark/after}
\NewHook{fnmark}
\NewHook{fnmark/begin}
\NewHook{fnmark/end}


\cs_new:Npn \@@_debug_footnotemark: {
  \bool_if:NT \g_fnote_debug_bool
       {
         \LogHook{fnmark/before}
         \LogHook{fnmark}
         \LogHook{fnmark/begin}
         \LogHook{fnmark/end}
         \LogHook{fnmark/after}
         \cs_gset_eq:NN \@@_debug_footnotemark: \prg_do_nothing:
       }
}


\cs_new_protected:Npn \fnote_footnotemark: {
  \@@_debug_footnotemark:
%-------
% bibarts
% chextras  --- actually in the wrong place does an \unskip
  \UseHook{fnmark/before}
%-------
  \leavevmode
  \ifhmode
    \edef\@x@sf{\the\spacefactor}
%-------
% bxjsja-minimal.def   --- what they do could be done at ``bibarts''
%                         (a bit less efficient)
% memhfixc.sty
% footmisc.sty
    \UseHook{fnmark}
%-------
    \nobreak
  \fi
%-------
% hyperref.sty
  \UseHook{fnmark/begin}
%-------
  \@kernel@process@makefnmark
     \@makefnmark
%-------
%    \end{macrocode}
%    If a footnote mark is placed by its own then it should finish by
%    executing \hook{fnmark/end}, resetting the space  factor, and
%    finishing with \hook{fnmark/after}. However, inf a complete
%    footnote these actions have to happen only after we have handled
%    the footnote text (e.g., by placing it into an \cs{insert}. In
%    such a situation \cs{_@@_footmark_finish:} below does nothing
%    and the action is carried out later.
%    \begin{macrocode}
  \@@_footnotemark_finish:
}


\cs_new:Npn \@@_finish: {
% hyperref.sty
% memhfixc.sty  --- could move fnmark/after
% scrlttr2.cls  --- could vanish if footmisc uses a hook
% footmisc.sty
  \UseHook{fnmark/end}
%-------
  \ifhmode
    \spacefactor \@x@sf \relax
  \fi
%
%-------
  \UseHook{fnmark/after}
%-------
}


\cs_new_eq:NN \@@_footnotemark_finish: \@@_finish:


  
% Not a public config point but the kernel hook to add tagging
\def \@kernel@process@makefnmark { }


% alterations not covered:
%
% ./arabtex/afoot.sty  --- too different (and probably too old)


% Provide the name \LaTeXe{} is used to.

\cs_set_eq:NN  \@footnotemark \fnote_footnotemark:



%-------------------------------------

\NewMirroredHookPair{fntext/before}{fntext/after}
\NewHook{fntext}
\NewHook{fntext/para}
\NewHook{fntext/begin}
\NewHook{fntext/end}


\cs_new:Npn \@@_debug_footnotetext: {
  \bool_if:NT \g_fnote_debug_bool
       {
         \cs_log:N\@footnotetext@cfgpoint
         \cs_log:N\@footnotetext@cfgpointii
         \cs_log:N\@footnotetext@cfgpointiii
         \cs_log:N\@footnotetext@cfgpointiv
         \cs_log:N\@makefntext@cfgpoint
         \cs_log:N\@makefntext@cfgpointii
         \LogHook{fntext/before}
         \LogHook{fntext}
         \LogHook{fntext/para}
         \LogHook{fntext/begin}
         \LogHook{fntext/end}
         \LogHook{fntext/after}
%    \end{macrocode}
%    Show the info only once (if at all).
%    \begin{macrocode}
         \cs_gset_eq:NN \@@_debug_footnotetext: \prg_do_nothing:
       }
  }

\cs_new_protected:Npn \fnote_footnotetext:n #1 {
  \@@_debug_footnotetext:
%-------
% ./linguex/linguex.sty
  \UseHook{fntext/before}
%-------
  \@kernel@process@footnotetext
  \@footnotetext@cfgpoint {  % config point
%-------
% resetting baselinestretch ... (could be done further down)
% ./uafthesis/uafthesis.cls
% ./setspace/setspace.sty
% ./footmisc/footmisc.sty (normal)
    \UseHook{fntext}
%-------
    \reset@font
    \footnotesize
%-------
% some classes use a different font size, e.g.,
% ./nrc/nrc1.cls  ./nrc/nrc2.cls
% but those could be done in fntext/para instead
%-------
%    \end{macrocode}
%    In case of sidenotes the next settings are pointless, but as they
%    do not hurt (except for the \cs{hsize} setting) and are needed
%    for all other cases we make them here and overwrite them for side notes
%    \begin{macrocode}
    \interlinepenalty\interfootnotelinepenalty
    \splittopskip\footnotesep
    \splitmaxdepth \dp\strutbox
    \floatingpenalty \@MM
    \hsize\columnwidth
    \@parboxrestore
    \parindent 1em     % typical default used in \@makefntext moved up here
    \def\@currentcounter{footnote}
    \protected@edef \@currentlabel { \p@footnote \@thefnmark }
%-------
% for altering para parameters ...
% code for resphilosophica came earlier but it could go here.
% Has the advantage that one can also overwrite \cs{@currentcounter}
% and \cs{@currentlabel} is that is necessary.
%
% ./resphilosophica/resphilosophica.cls
    \UseHook{fntext/para}
%-------
    \color@begingroup
%-------
% fnpara wants to replace \@makefntext{...} and para and side option of footmisc etc too ...
% so we make this a config point
%-------
      \@footnotetext@cfgpointii       % config point
        {
%-------
% ./resphilosophica/resphilosophica.cls
%-------
          \@footnotetext@cfgpointiii  % config point
%-------
% bibarts
% fnbreak.sty
          \UseHook{fntext/begin}
%-------
          \ignorespaces
          #1
%-------
% bibarts
% fnbreak.sty
          \UseHook{fntext/end}
%-------
          \@footnotetext@cfgpointiv   % config point
        }
      \par
    \color@endgroup
  }
%-------
% ./linguex/linguex.sty
  \UseHook{fntext/after}
%-------
}

% default for config point (1 arg)
\cs_new_protected:Npn \@footnotetext@cfgpoint    { \insert\footins }

% default for config point (1 arg)
\cs_new_protected:Npn \@footnotetext@cfgpointii  { \@makefntext }


% default for config point (0 args)
\cs_new_protected:Npn \@footnotetext@cfgpointiii { \rule\z@\footnotesep }

% default for config point (0 args)
\cs_new_protected:Npn \@footnotetext@cfgpointiv  { \@finalstrut\strutbox }


% kernel hook for tagging (2 args)
\cs_new_protected:Npn \@kernel@process@footnotetext {}

% Provide the name \LaTeXe{} is used to and do this unconditionally
%   (no patching of class code if any). This means that if a class provides it own
%    definition that gets lost and if necessary needs to be handled
%    with firstaid (or updating of the class.

\AddToHook{begindocument}{
  \cs_set_eq:NN \@footnotetext \fnote_footnotetext:n
}

% alterations not covered:
%
% ./revtex4-1/revtex4-1.cls  ./revtex/ltxutil.sty ./revtex/revtex4-2.cls ... (need analysis)
% ./bigfoot/bigfoot.sty



% \footnotemargin is the logic implemented by footmisc. Perhaps we
% don't want to do this like that in the kernel but for now I have
% used this interface unchanged.


\newdimen\footnotemargin
\footnotemargin\maxdimen         % no value given

\AtBeginDocument{
  \ifdim \footnotemargin=\maxdimen
    \setlength\footnotemargin{1.8em}
  \fi
}     


\cs_new_protected:Npn \fnote_makefntext:n #1 {
%    \end{macrocode}
%    Some classes in their redefinition for \cs{@makefntext} have
%    places some paragraph parameters at this point, but those can
%    equally well go into the hook \hook{fntext/para}. We therefore do
%    not provide a further hook at this point.
%    \begin{macrocode}
  \@makefntext@cfgpoint
      {
        \ifdim\footnotemargin>\z@
          \hb@xt@ \footnotemargin{\hss\@makefnmark}
        \else
          \ifdim\footnotemargin=\z@
            \llap{\@makefnmark}
          \else
          \ifdim\footnotemargin=-\maxdimen
               \@makefnmark
            \else
               \llap{\hb@xt@ -\footnotemargin{\@makefnmark\hss}}
            \fi
          \fi
        \fi
      }
  \@makefntext@cfgpointii
      { #1 }
}




% default for config point (1 arg)
\cs_new_protected:Npn \@makefntext@cfgpoint { \noindent }

% default for config point (1 arg)
\cs_new_protected:Npn \@makefntext@cfgpointii #1 { #1 }
%    \end{macrocode}
%
%
%
%    If the definition for \cs{@makefntext} is that of the standard
%    classes then replace it with \cs{fnote_makefntext:n}, otherwise
%    try to patch the definition.
%
%    Here is the the definition the way it is in
%    \texttt{classes.dtx}. Notice that (for saving space) there is no
%    space after \texttt{em} to terminate the assignment. We need to
%    mimic that, otherwise a test would return false even if the
%    definition has not been modified.
%
%    \begin{macrocode}
\newcommand\old@std@class@makefntext[1]{%
    \parindent 1em%
    \noindent
    \hb@xt@1.8em{\hss\@makefnmark}#1}

%    \end{macrocode}
%    Here is the messy code for patching. Note that this is only there
%    to help classes along that aren't updated yet so it does some
%    minimal patching to hopefully add configuration points in the
%    right place.
%
%    What it does is roughly the
%    following: It look for a definition of \cs{@makefntext} of the form
%\begin{verbatim}
%  {AAA \hbox BBB { CCC } DDD #1 EEE }
%\end{verbatim}
%    where ``BBB'' is something like \texttt{to 1em} or similar. It then
%    replaces that with
%\begin{verbatim}
%  {AAA \@makefntext@cfgpoint{\hbox BBB { CCC }} DDD
%       \@makefntext@cfgpointii{#1} EEE }
%\end{verbatim}
%    The patching is not very careful, i.e., it assumes there is only
%    one \verb=#1= in the replacement text and that a \cs{hbox} found
%    is the right one to patch. But that is enough to cater for all
%    definitions of \cs{@makefntext} out there in the TL distribution.
%
%    If \cs{hbox} is not found it tries the same looking for
%    \cs{hb@xt@} which is what some classes use and if that is not
%    found either it assume that this is a version that uses
%    \cs{@makefnmark} without surrounding it in a box and if that
%    fails it gives up with an \cs{ERROR} (which needs to get a proper definition).
%    \begin{macrocode}

\tl_new:N \l_@@_patch_tl
\cs_new_eq:NN \@@_tmp:w \ERROR

\cs_new_protected:Npn \@@_patch:
  {
    \tl_set:No \l_@@_patch_tl { \@makefntext { \@makefntext@cfgpointii{##1} } }
    \tl_if_in:NnTF \l_@@_patch_tl { \hbox }
      { \cs_set_eq:NN \@@_tmp:w \@@_patch_hbox:w }
      {
        \tl_if_in:NnTF \l_@@_patch_tl { \hb@xt@ }
          { \cs_set_eq:NN \@@_tmp:w \@@_patch_hb@xt@:w }
          {
            \tl_if_in:NnTF \l_@@_patch_tl { \@makefnmark }
              { \cs_set_eq:NN \@@_tmp:w \@@_patch_@makefnmark:w }
              { \ERROR
                \cs_set_eq:NN \@@_tmp:w \exp_stop_f: }
          }
      }
    \tl_set:Nf \l_@@_patch_tl
      { \exp_after:wN \@@_tmp:w \l_@@_patch_tl }
    \cs_set:Npn \@@_tmp:w { \long \def \@makefntext ####1 }
    \exp_after:wN \@@_tmp:w \exp_after:wN { \l_@@_patch_tl }
  }
%    \end{macrocode}
%
%    If \cs{@makefntext} contains \cs{hbox} then grab ``AAA'' as
%    \verb=#1= and ``BBB'' (up to the open \verb={=)  and return it as
%\begin{verbatim}
%   AAA  \@makefntext@processX { \hbox BBB }
%\end{verbatim}
%    \begin{macrocode}
\cs_new:Npn \@@_patch_hbox:w #1 \hbox #2 #
  { \exp_stop_f: #1 \@makefntext@processX { \hbox #2 } }
%    \end{macrocode}
%    Same for the other cases.
%    \begin{macrocode}
\cs_new:Npn \@@_patch_hb@xt@:w #1 \hb@xt@ #2 #
  { \exp_stop_f: #1 \@makefntext@processX { \hb@xt@ #2 } }
\cs_new:Npn \@@_patch_@makefnmark:w #1 \@makefnmark
  { \exp_stop_f: #1 \@makefntext@processX { \use:n } { \@makefnmark } }
%    \end{macrocode}
%
%    The code provided by Bruno above expects 2 arguments but we need a
%    different structure so this is a simple reshuffling. Would be
%    better if we can patch the right structure in directly, but I'm
%    not a patch person, so this is the simple way out for now:
%    
%    \begin{macrocode}
\cs_new:Npn \@makefntext@processX #1#2{\@makefntext@cfgpoint{#1{#2}}}
%    \end{macrocode}
%    At \verb=\begin{document}= check if the current definition is
%    that of the standard classes and if so replace it by
%    \cs{fnote_makefntext:n} otherwise try and patch the definition
%    using the approach above.
%    \begin{macrocode}

\AddToHook{begindocument}{
  \cs_if_eq:NNTF \@makefntext \old@std@class@makefntext
     {
       \cs_set_eq:NN \@makefntext \fnote_makefntext:n
     }
     {
       \@@_patch:
     }
}


% possibly add the following to check for multiple \hbox in
% the definition:
%
% \seq_set_split:NnV \l_@@_patch_seq { \hbox } \l_@@_patch_tl
% \int_compare:nT { \seq_count:N \l_@@_patch_seq } > 2 \ERROR
%
%    \end{macrocode}
%
%
%
%
% \subsection{Document-level commands}
%
% \changes{v0.6b}{2022/07/22}{Make mandatory arguments of  \cs{footnote}
%      and \cs{footnotetext} long (gh863)}
%    \begin{macrocode}

\DeclareDocumentCommand\footnotetext {o+m} {
  \fnote_set_fnmark:nn {#1} \@mpfn
  \@footnotetext {#2}
}


%-------------------------------------


\DeclareDocumentCommand\footnote {o+m} {
  \fnote_step_fnmark:nn {#1} \@mpfn
  \cs_set_eq:NN \@@_footnotemark_finish: \prg_do_nothing:
  \@footnotemark
  \cs_set_eq:NN \@@_footnotemark_finish: \@@_finish:
  \@footnotetext {#2}
  \@@_footnotemark_finish:
}

%-------------------------------------


\DeclareDocumentCommand\footnotemark {o} {
  \fnote_step_fnmark:nn {#1} { footnote }
  \@footnotemark
}


%-------------------------------------

\DeclareDocumentCommand\footref {m}{%
  \begingroup
    \unrestored@protected@xdef\@thefnmark{\ref{#1}}%
  \endgroup
  \@footnotemark
}

%    \end{macrocode}
%    
%    \begin{macrocode}
%<@@=>
%    \end{macrocode}
%
%
%
%
%
%
% \subsection{Firstaid for packages and classes}
%
% \subsubsection{\pkg{setspace}}
%
%    It should not overwrite it any longer but use a hook, so for now we
%    do just that here.
%    \begin{macrocode}
\AddToHook{package/setspace/after}
   {\let \@footnotetext \fnote_footnotetext:n
    \AddToHook{fntext}[setspace]{\let\baselinestretch\setspace@singlespace}}
%    \end{macrocode}
%
%
%
%
% \subsubsection{\pkg{hyperref}}
%
%    Prevent hyperref from redefining footnote stuff --- this is a
%    temp solution.
%    \begin{macrocode}
\AddToHook{package/hyperref/after}{
  \let\H@@footnotetext\fnote_footnotetext:n
  \let\H@@footnotemark\fnote_footnotemark:
  \let \@footnotetext \fnote_footnotetext:n
  \let \@footnotemark \fnote_footnotemark:
}



%    \end{macrocode}
%
% \subsection{Stuff that needs cleanup and documentation}
%
%    \begin{macrocode}


%-------------------------------------

% use of kerns to mark h-mode positions (unit sp)
%
% 1 = CJK
% 2 = CJK
% 3 = multiple footnotes (footmisc, koma, eledmac, tufte, memoir,
%    parnotes, sidenotes)
% 3 = outer kern in letter spacing (letterspace)
% 3 = beginning of list (examdesign.cls)
% 4 = CJK pigin
% 5 = CJK ruby

% 1-4 = polyglossia for korean

%-------------------------------------



%-------------------------------------
%  Tagging
%-------------------------------------

% hyperref support only when loaded (improve integration)

\newcounter{absfootnote}
\AddToHook{fnmark/begin}{\stepcounter{absfootnote}}  % too simple (fails with opt args)



% this is rubbish and should be handled better:

\cs_new_protected:Npn \tag_if_loaded:TF  { \cs_if_exist:NTF \tag_struct_begin:n }



\cs_new_protected:Npn \tag@FEMark #1 {
  \tag_if_loaded:TF
     {
       \tag_mc_end_push:
       \exp_args:Nx
       \tag_struct_begin:n{tag=Lbl,ref=fn.\the\c@absfootnote}
       \tag_mc_begin:n{tag=Lbl}
       \IfPackageLoadedTF{hyperref}{ \hyper@linkstart
         {link}{fn.\the\c@absfootnote} }{}
       #1
      \IfPackageLoadedTF{hyperref}{ \hyper@linkend }{}
      \tag_mc_end:
      \tag_struct_end:
      \tag_mc_begin_pop:n{}
     }
     { #1 }
}

% to be done next round around:
%
% \the\c@absfootnote should be replaced directly by some command with default meaning
% \the\c@absfootnote so that the actual reference can be changed from the outside.
%
% there are several instances that are curently hardwired.

\cs_set_eq:NN \@kernel@process@makefnmark \tag@FEMark



% kernel hook for tagging (2 args)
\cs_set:Npn \@kernel@process@footnotetext #1#2 {
  \tag_if_loaded:TF
    {
      \tag_mc_end_push:
      \tag_struct_begin:n { tag=FENote,label=fn.\the\c@absfootnote }
      #1 {#2}
      \tag_struct_end:
      \tag_mc_begin_pop:n{}
    }
    { #1 {#2} }
}



\cs_set:Npn \@makefntext@cfgpoint #1 {
  \noindent
  \cs_if_exist:NT \tag_struct_begin:n { \tag_mc_end_push: }
  \tag@FELbl { #1 }
}

\cs_set:Npn \@makefntext@cfgpointii #1 {
  \tag@FENote { #1 }
  \cs_if_exist:NT \tag_struct_begin:n { \tag_mc_begin_pop:n{} }
}




\cs_new_protected:Npn \tag@FELbl #1 {
  \tag_if_loaded:TF
    {
      % target should perhaps be raised ...
      \IfPackageLoadedTF{hyperref}{ \hypertarget{fn.\the\c@absfootnote}{} }{}
      %\tag_struct_begin:n { tag=FENote,label=fn.\the\c@absfootnote } %alternativ location for structure
      \tag_struct_begin:n { tag=Lbl }
        \tag_mc_begin:n { tag=Lbl }
          #1
        \tag_mc_end:
      \tag_struct_end:
    }
    { #1 }
}

\cs_new_protected:Npn \tag@FENote #1 {
  \tag_if_loaded:TF
    {
      \tag_mc_begin:n{tag=FENote}
      #1
      \tag_mc_end:
      %\tag_struct_end: %alternative location for structure end but ends inside a P
    }
    { #1 }
}
 
%-------------------------------------


\ExplSyntaxOff
%</kernel>
%    \end{macrocode}
%
%
% \section{Reimplementing the \pkg{footmisc} package}
%
%    \begin{macrocode}
%<*footmisc>
%%
%% Copyright (c) 1995-2011 Robin Fairbairns
%% Copyright (c) 2018-2022 Robin Fairbairns, Frank Mittelbach
%%
%% This file is part of the `latex-lab Bundle'.
%% --------------------------------------------
%%
%% It may be distributed and/or modified under the
%% conditions of the LaTeX Project Public License, either version 1.3c
%% of this license or (at your option) any later version.
%% The latest version of this license is in
%%    https://www.latex-project.org/lppl.txt
%% and version 1.3c or later is part of all distributions of LaTeX
%% version 2008 or later.
%%
%% This work has the LPPL maintenance status 'maintained'.
%%
%%
%% File: footmisc.dtx (C) Copyright 1995-2011 Robin Fairbairns
%%                    (C) Copyright 2018-2022 Frank Mittelbach
\NeedsTeXFormat{LaTeX2e}
\providecommand\DeclareRelease[3]{}
\providecommand\DeclareCurrentRelease[2]{}

\DeclareRelease{v5}{2011-06-06}{footmisc-2011-06-06.sty}
\DeclareCurrentRelease{}{2022-02-14}
\ProvidesPackage{latex-lab-footmisc}%
        [2022/03/08 v6.0d
     a miscellany of footnote facilities -- latex-lab version%
                   ]

\NeedsTeXFormat{LaTeX2e}[2020/10/01]
\newtoks\FN@temptoken
\providecommand\protected@writeaux{%
  \protected@write\@auxout
}
\def\l@advance@macro{\@@dvance@macro\edef}
\def\@@dvance@macro#1#2#3{\expandafter\@tempcnta#2\relax
  \advance\@tempcnta#3\relax
  #1#2{\the\@tempcnta}%
}
\let\@advance@macro\l@advance@macro
\DeclareOption{symbol}{\renewcommand\thefootnote{\fnsymbol{footnote}}}
\newif\ifFN@robust \FN@robustfalse
\DeclareOption{symbol*}{%
  \renewcommand\thefootnote{\@fnsymbol\c@footnote}%
  \FN@robusttrue
  \AtEndOfPackage{\setfnsymbol{lamport*-robust}}%
}
\newif\ifFN@para  \FN@parafalse
\DeclareOption{para}{%
%    \end{macrocode}
%    Options are executed in the order of declaration, thus no point in
%    checking for side option as footmisc did in the past
%    \begin{macrocode}
%    \PackageError{footmisc}{Option "\CurrentOption" incompatible with
%                            option "side"}%
%                 {I shall ignore "\CurrentOption"}%
  \FN@paratrue
  \setlength\footnotemargin{-\maxdimen}    % default when para is used
}
%    \end{macrocode}
%
%    \begin{macrocode}
\DeclareOption{side}{\ifFN@para
    \PackageError{footmisc}{Option "\CurrentOption" incompatible with
                            option "para"}%
                 {I shall ignore "\CurrentOption"}%
  \else
    \def\@footnotetext@cfgpoint {\marginpar}
    \AddToHook{fntext/para}{%
      \hsize\marginparwidth     % correct the default \hsize
      \footnotesep\z@           % don't add a default separation
    }
    \def\@footnotetext@cfgpointii  {\@makefntext}
    \def\@footnotetext@cfgpointiii {}
    \def\@footnotetext@cfgpointiv  {}
  \fi
}
\let\footnotelayout\@empty
\DeclareOption{ragged}{%
  \@ifundefined{RaggedRight}%
    {\renewcommand\footnotelayout{\linepenalty50 \raggedright}}%
    {\renewcommand\footnotelayout{\linepenalty50 \RaggedRight}}%
}
\newif\ifFN@perpage
\FN@perpagefalse
\DeclareOption{perpage}{%
  \FN@perpagetrue
}
\newif\ifFN@fixskip      \FN@fixskipfalse

\let\FN@bottomcases\thr@@
\newif\ifFN@abovefloats  \FN@abovefloatstrue
\DeclareOption{bottom}{%
  \let\FN@bottomcases\@ne
  \FN@abovefloatsfalse
  \FN@fixskiptrue
}
\DeclareOption{bottomfloats}{%
  \let\FN@bottomcases\tw@
  \FN@abovefloatstrue \FN@fixskiptrue
}
\DeclareOption{abovefloats}{\FN@abovefloatstrue  \FN@fixskiptrue}
\DeclareOption{belowfloats}{\FN@abovefloatsfalse \FN@fixskiptrue}
\DeclareOption{marginal}{%
  \footnotemargin-0.8em\relax
}
\DeclareOption{flushmargin}{%
  \footnotemargin0pt\relax
}
\newif\ifFN@hangfoot  \FN@hangfootfalse
\DeclareOption{hang}{%
  \FN@hangfoottrue
}
\newcommand*\hangfootparskip{0.5\baselineskip}
\newcommand*\hangfootparindent{0em}%
\DeclareOption{norule}{%
  \renewcommand\footnoterule{}%
  \advance\skip\footins 4\p@\@plus2\p@\relax
}
\DeclareOption{splitrule}{%
  \gdef\split@prev{0}
  \let\pagefootnoterule\footnoterule
  \let\mpfootnoterule\footnoterule
  \def\splitfootnoterule{\kern-3\p@ \hrule \kern2.6\p@}
  \def\footnoterule{\relax
    \ifx \@listdepth\@mplistdepth
      \mpfootnoterule
    \else
      \ifnum\split@prev=\z@
        \pagefootnoterule
      \else
        \splitfootnoterule
      \fi
      \xdef\split@prev{\the\insertpenalties}%
    \fi
  }%
}
\newif\ifFN@stablefootnote  \FN@stablefootnotefalse
\DeclareOption{stable}{\FN@stablefootnotetrue}
\newif\ifFN@multiplefootnote  \FN@multiplefootnotefalse
\DeclareOption{multiple}{\FN@multiplefootnotetrue}
\ProcessOptions
%    \end{macrocode}
%    This version of \pkg{footmisc} can assume that the new OR code is
%    already available, thus nothing needs loading at this
%    point. However, as long as we use this code also in a package
%    version that can be loaded by other package while we are in a
%    transition phase it is not clear whether not the kernel code is
%    already available for other packages.
%    \begin{macrocode}
%\@ifundefined{@kernel@before@cclv}
%  {\input{latex-lab-new-or.ltx}}{}
%    \end{macrocode}
%
%    Footnote box layout for para footnotes;
%    this would also be the hook to support dblfootnotes (from the
%    \texttt{dblfnote} package if we integrate that).
%    \begin{macrocode}
\ifFN@para
  \def\@makecol@cfgpointii {%
     \global\setbox\footins\vbox{\FN@makefootnoteparagraph}%
    }
\fi
%    \end{macrocode}
%
%    \begin{macrocode}
\ifFN@fixskip
  \def\@outputbox@removebskip{%
    \ifx\@textbottom\relax \else
      \@outputbox@append{%
        \@tempskipa\lastskip
        \ifnum \gluestretchorder\@tempskipa>\z@
          \vskip-\@tempskipa
          \xdef\@outputbox@reinsertbskip
              {\noexpand\@outputbox@append{\vskip\the\@tempskipa}}%
        \else
          \global\let\@outputbox@reinsertbskip\relax
        \fi
      }%
   \fi
  }
\let\@outputbox@reinsertbskip\relax
\else
  \let\@outputbox@removebskip \relax
  \let\@outputbox@reinsertbskip\relax
\fi
%    \end{macrocode}
%
%
%
%    \begin{macrocode}
\ifcase \FN@bottomcases\relax
\ERROR
\or
  \ifFN@abovefloats
    \def\@makecol@cfgpoint {%
       \@if@footnotes@TF
          {\@outputbox@append{\vfill}}%
          {\@if@bfloats@TF{\@outputbox@append{\vfill}}%
                          {\@outputbox@reinsertbskip}}%
       \@outputbox@appendfootnotes
       \@outputbox@attachfloats
      }
  \else
    \def\@makecol@cfgpoint {%
       \@outputbox@attachfloats
       \@if@footnotes@TF
          {\@outputbox@append{\vfill}}%
          {\@outputbox@reinsertbskip}%
       \@outputbox@appendfootnotes
    }
  \fi
\or
  \ifFN@abovefloats
     \def\@makecol@cfgpoint {%
        \@outputbox@appendfootnotes
        \@if@bfloats@TF
            {\@outputbox@append{\vfill}}%
            {\@outputbox@reinsertbskip}%
        \@outputbox@attachfloats
     }
  \else
     \def\@makecol@cfgpoint {%
       \@if@footnotes@TF
          {\@outputbox@append{\vfill}}%
          {\@if@bfloats@TF{\@outputbox@append{\vfill}}%
                          {\@outputbox@reinsertbskip}}%
        \@outputbox@attachfloats
        \@outputbox@appendfootnotes
     }
  \fi
\or
  \ifFN@abovefloats
    \def\@makecol@cfgpoint {%
       \@outputbox@appendfootnotes
       \@outputbox@attachfloats
       \@outputbox@reinsertbskip
    }
  \else
    \def\@makecol@cfgpoint {%
       \@outputbox@attachfloats
       \@outputbox@appendfootnotes
       \@outputbox@reinsertbskip
}
  \fi
\else
\ERROR
\fi

% next can be dropped when cleaned up
\newif\ifFN@setspace
\@ifpackageloaded{setspace}%
 {%
   \FN@setspacetrue
   \@ifclassloaded{memoir}%
     {%
       \AddToHook{fntext}{\let\baselinestretch\m@m@singlespace}%
       \let\FN@baselinestretch\m@m@singlespace
     }%
     {%
%       \AddToHook{fntext}{\let\baselinestretch\setspace@singlespace}%
       \let\FN@baselinestretch\setspace@singlespace
     }%
 }%
 {%
   \FN@setspacefalse
 }



\ifFN@para
  \def\@footnotetext@cfgpoint {\insert\footins}

  \long\def\@footnotetext@cfgpointii #1{%
    \setbox\FN@tempboxa\hbox{\@makefntext{#1}}%
    \dp\FN@tempboxa\z@
    \ht\FN@tempboxa
      \dimexpr\wd\FN@tempboxa *%
              \footnotebaselineskip /\columnwidth\relax
    \box\FN@tempboxa
  }


  \def\@footnotetext@cfgpointiii {}
  \def\@footnotetext@cfgpointiv {% config point
           \strut
           \penalty-10\relax
           \hskip\footglue
  }
\fi



\ifFN@para
  \let\FN@tempboxa\@tempboxa
  \newbox\FN@tempboxb
  \newbox\FN@tempboxc
  \newskip\footglue \footglue=1em plus.3em minus.3em

%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%
  \newdimen\footnotebaselineskip

  % establish late:

\AddToHook{begindocument/before} {%
  {%
    \footnotesize
    \global\footnotebaselineskip=\normalbaselineskip
  }%
}
%    \end{macrocode}
%    The coding is based on David Kastrup's improvement to Don Knuth's
%    original implementation. You find in the \TeX{}book if you own
%    the latest edition.
%    \begin{macrocode}

  \long\def\FN@makefootnoteparagraph{%
    \FN@setfootnoteparawidth
    \@parboxrestore
    \baselineskip=\footnotebaselineskip
    \unvbox\footins \FN@removehboxes
    \RawParEnd
  }
  \def\FN@removehboxes{\setbox\FN@tempboxa\lastbox
    \ifhbox\FN@tempboxa{\FN@removehboxes}%
      \unhbox\FN@tempboxa
    \else
      \RawNoindent
      \rule\z@\footnotesep
    \fi
  }
\fi


\@ifpackageloaded{multicol}
  {\def\FN@setfootnoteparawidth
    {\hsize\ifnum\doublecol@number>\@ne
                  \textwidth
            \else \columnwidth \fi}}
  {\def\FN@setfootnoteparawidth{\hsize\columnwidth}}

\ifFN@perpage
  \RequirePackage{perpage}
  \MakePerPage{footnote}
%    \end{macrocode}
%    Fix a bug in perpage \ldots
%    \begin{macrocode}
  \def\@stpelt#1{\global\csname c@#1\endcsname \m@ne
    \stepcounter{#1}%
    \pp@fix@MakePerPage{#1}%
  }
  \def\pp@fix@MakePerPage#1{%
      \ifnum \value{#1}>\z@
        \addtocounter{#1}\m@ne\fi
  }
%    \end{macrocode}
%    The above code may look a bit odd: the \cs{stepcounter} sets the
%    counter to zero and then we alter it if it is not zero.  The
%    reason is that \cs{stepcounter} resets other counters and when
%    perpage is loaded this results in updating counters on the reset
%    list to 1 (or to a higher starting value if \cs{MakePerPage} is
%    used with an optional argument, which is precisely the problem
%    here. By subtracting 1 in that case we set it back to 1 lower
%    than the starting value.
%
%    But to make this fully work we also need to update a support
%    command in \pkg{perpage}:
%    \begin{macrocode}
  \def\pp@cl@end@iii\stepcounter#1\pp@fix@MakePerPage#2{}
\fi


\ifFN@para

% This can use the default interface, except that a negative value for
% \footnotemargin makes little sense, so we test for this and warn if
% necessary. But -\maxdimen is ok again, so would need to be a litte bit more elaborate.
%

%\AddToHook{fntext/para}{
%  \ifdim \footnotemargin >\z@ \else
%    \PackageWarningNoline{footmisc}{Option 'para' needs positive \noexpand\footnotemargin}%
%    \footnotemargin 1.8em\relax
%  \fi
%}


\AddToHook{fntext/begin}{\nobreak \hspace{.2em}}




\else

  \ifFN@hangfoot
    \long\def\@makefntext#1{%
      \bgroup
        \setbox\@tempboxa\hbox{%
          \ifdim\footnotemargin>\z@
            \hb@xt@\footnotemargin{\@makefnmark\hss}%
          \else
            \@makefnmark
          \fi
        }%
        \leftmargin\wd\@tempboxa
        \rightmargin\z@
        \linewidth \columnwidth
        \advance \linewidth -\leftmargin
        \parshape \@ne \leftmargin \linewidth
        \footnotesize
        \@setpar{{\@@par}}%
        \leavevmode
        \llap{\box\@tempboxa}%
        \parskip\hangfootparskip\relax
        \parindent\hangfootparindent\relax
        \footnotelayout#1%
        \par
      \egroup
    }

 \else

% This is now using the default interface:
%
% \long\def\@makefntext#1{%
%      \parindent1em
%      \noindent
%      \ifdim\footnotemargin>\z@
%        \hb@xt@ \footnotemargin{\hss\@makefnmark}%
%      \else
%        \ifdim\footnotemargin=\z@
%          \llap{\@makefnmark}%
%        \else
%          \llap{\hb@xt@ -\footnotemargin{\@makefnmark\hss}}%
%        \fi
%      \fi
%    \footnotelayout#1%
%  }

 \fi
\fi




\ifFN@multiplefootnote
  \providecommand*{\multiplefootnotemarker}{3sp}
  \providecommand*{\multfootsep}{,}
  \AddToHook{fnmark}      {\FN@mf@check}
  \AddToHook{fnmark/end}  {\FN@mf@prepare}
%
  \def\FN@mf@prepare{%
    \kern-\multiplefootnotemarker
    \kern\multiplefootnotemarker\relax
  }
  \def\FN@mf@check{%
    \ifdim\lastkern=\multiplefootnotemarker\relax
%?? is that necessary or even correct ??
      \edef\@x@sf{\the\spacefactor}%
%?? shouldn't that be 2 unkerns ?? (none would also be ok)
      \unkern  % new
      \unkern
      \textsuperscript{\multfootsep}%
      \spacefactor\@x@sf\relax
    \fi
  }
\else
  \let\FN@mf@prepare\relax
\fi
\ifFN@stablefootnote
\let\FN@sf@@footnote\footnote
\def\footnote{\ifx\protect\@typeset@protect
    \expandafter\FN@sf@@footnote
  \else
    \expandafter\FN@sf@gobble@opt
  \fi
}
\edef\FN@sf@gobble@opt{\noexpand\protect
  \expandafter\noexpand\csname FN@sf@gobble@opt \endcsname}
\expandafter\def\csname FN@sf@gobble@opt \endcsname{%
  \@ifnextchar[%]
    \FN@sf@gobble@twobracket
    \@gobble
}
\def\FN@sf@gobble@twobracket[#1]#2{}
\let\FN@sf@@footnotemark\footnotemark
\def\footnotemark{\ifx\protect\@typeset@protect
    \expandafter\FN@sf@@footnotemark
  \else
    \expandafter\FN@sf@gobble@optonly
  \fi
}
\edef\FN@sf@gobble@optonly{\noexpand\protect
  \expandafter\noexpand\csname FN@sf@gobble@optonly \endcsname}
\expandafter\def\csname FN@sf@gobble@optonly \endcsname{%
  \@ifnextchar[%]
    \FN@sf@gobble@bracket
    {}%
}
\def\FN@sf@gobble@bracket[#1]{}
\fi
\newcommand\setfnsymbol[1]{%
  \@bsphack
  \@ifundefined{FN@fnsymbol@#1}%
  {%
    \PackageError{footmisc}{Symbol style "#1" not known}%
    \@eha
  }{%
    \expandafter\let\expandafter\@fnsymbol\csname
                        FN@fnsymbol@#1\endcsname
  }%
  \@esphack
}
\let\FN@fnsymbol@lamport\@fnsymbol
\newif\if@tempswb
\DeclareDocumentCommand\DefineFNsymbols {smO{text}m}{%
  \expandafter\ifx\csname FN@fnsymbol@#2\endcsname\relax
    \PackageInfo{footmisc}{Declaring symbol style #2}%
  \else
    \PackageWarning{footmisc}{Redeclaring symbol style #2}%
  \fi
  \toks@{}%
  \def\@tempb{\end}%
  \FN@build@symboldef#4\end
  \def\@tempc{math}%
  \def\@tempd{#3}%
  \expandafter\xdef\csname FN@fnsymbol@#2\endcsname##1{%
    \ifx\@tempc\@tempd
      \noexpand\ensuremath
    \else
      \noexpand\nfss@text
    \fi
    {%
      \noexpand\ifcase##1%
      \the\toks@
      \noexpand\else
      \IfBooleanTF#1{\noexpand\@ctrerr}%
        {\noexpand\FN@orange##1}%
      \noexpand\fi
    }%
  }%
}
\def\FN@build@symboldef#1{%
  \def\@tempa{#1}%
  \ifx\@tempa\@tempb
  \else
    \toks@\expandafter{\the\toks@\or#1}%
    \expandafter\FN@build@symboldef
  \fi
}
\DeclareDocumentCommand\DefineFNsymbolsTM {smm}{%
  \expandafter\ifx\csname FN@fnsymbol@#2\endcsname\relax
    \PackageInfo{footmisc}{Declaring symbol style #2}%
  \else
    \PackageWarning{footmisc}{Redeclaring symbol style #2}%
  \fi
  \toks@{}%
  \def\@tempb{\end}%
  \FN@build@symboldefTM#3\end\@null
  \expandafter\xdef\csname FN@fnsymbol@#2\endcsname##1{%
    \noexpand\ifcase##1%
      \the\toks@
    \noexpand\else
      \IfBooleanTF#1{\noexpand\@ctrerr}%
        {\noexpand\FN@orange##1}%
      \noexpand\fi
  }%
}
\def\FN@build@symboldefTM#1#2{%
  \def\@tempa{#1}%
  \ifx\@tempa\@tempb
  \else
    \toks@\expandafter{\the\toks@\or\TextOrMath{#1}{#2}}%
    \expandafter\FN@build@symboldefTM
  \fi
}
\def\FN@orange#1{%
  \ifFN@robust
    \@arabic#1%
    \@bsphack
    \PackageInfo{footmisc}{Footnote number \number#1 out of range}%
    \protect\@fnsymbol@orange
    \@esphack
  \else \@ctrerr \fi
}
\global\let\@diagnose@fnsymbol@orange\relax
\AtEndDocument{\@diagnose@fnsymbol@orange}
\def\@fnsymbol@orange{%
  \gdef\@diagnose@fnsymbol@orange{%
    \PackageWarningNoLine{footmisc}{Some footnote number(s)
      were out of range
      \MessageBreak
      see log for details%
    }%
  }%
}
\DefineFNsymbolsTM{bringhurst}{%
  \textasteriskcentered *%
  \textdagger    \dagger
  \textdaggerdbl \ddagger
  \textsection   \mathsection
  \textbardbl    \|%
  \textparagraph \mathparagraph
}%
\DefineFNsymbolsTM{chicago}{%
  \textasteriskcentered *%
  \textdagger    \dagger
  \textdaggerdbl \ddagger
  \textsection   \mathsection
  \textbardbl    \|%
  \#\#%
}%
\DefineFNsymbolsTM{wiley}{%
  \textasteriskcentered *%
  {\textasteriskcentered\textasteriskcentered}{**}%
  \textdagger    \dagger
  \textdaggerdbl \ddagger
  \textsection   \mathsection
  \textparagraph \mathparagraph
  \textbardbl    \|%
}%
\DefineFNsymbolsTM{lamport-robust}{%
  \textasteriskcentered *%
  \textdagger    \dagger
  \textdaggerdbl \ddagger
  \textsection   \mathsection
  \textparagraph \mathparagraph
  \textbardbl    \|%
  {\textasteriskcentered\textasteriskcentered}{**}%
  {\textdagger\textdagger}{\dagger\dagger}%
  {\textdaggerdbl\textdaggerdbl}{\ddagger\ddagger}%
}
\DefineFNsymbolsTM*{lamport*}{%
  \textasteriskcentered *%
  \textdagger    \dagger
  \textdaggerdbl \ddagger
  \textsection   \mathsection
  \textparagraph \mathparagraph
  \textbardbl    \|%
  {\textasteriskcentered\textasteriskcentered}{**}%
  {\textdagger\textdagger}{\dagger\dagger}%
  {\textdaggerdbl\textdaggerdbl}{\ddagger\ddagger}%
  {\textsection\textsection}{\mathsection\mathsection}%
  {\textparagraph\textparagraph}{\mathparagraph\mathparagraph}%
  {\textasteriskcentered\textasteriskcentered\textasteriskcentered}{***}%
  {\textdagger\textdagger\textdagger}{\dagger\dagger\dagger}%
  {\textdaggerdbl\textdaggerdbl\textdaggerdbl}{\ddagger\ddagger\ddagger}%
  {\textsection\textsection\textsection}%%
    {\mathsection\mathsection\mathsection}%
  {\textparagraph\textparagraph\textparagraph}%%
    {\mathparagraph\mathparagraph\mathparagraph}%
}
\setfnsymbol{lamport*}
\DefineFNsymbolsTM{lamport*-robust}{%
  \textasteriskcentered *%
  \textdagger    \dagger
  \textdaggerdbl \ddagger
  \textsection   \mathsection
  \textparagraph \mathparagraph
  \textbardbl    \|%
  {\textasteriskcentered\textasteriskcentered}{**}%
  {\textdagger\textdagger}{\dagger\dagger}%
  {\textdaggerdbl\textdaggerdbl}{\ddagger\ddagger}%
  {\textsection\textsection}{\mathsection\mathsection}%
  {\textparagraph\textparagraph}{\mathparagraph\mathparagraph}%
  {\textasteriskcentered\textasteriskcentered\textasteriskcentered}{***}%
  {\textdagger\textdagger\textdagger}{\dagger\dagger\dagger}%
  {\textdaggerdbl\textdaggerdbl\textdaggerdbl}{\ddagger\ddagger\ddagger}%
  {\textsection\textsection\textsection}%%
    {\mathsection\mathsection\mathsection}%
  {\textparagraph\textparagraph\textparagraph}%%
    {\mathparagraph\mathparagraph\mathparagraph}%
}
\newcommand\mpfootnotemark{%
  \@ifnextchar[%
    \@xmpfootnotemark
    {%
      \stepcounter\@mpfn
      \protected@xdef\@thefnmark{\thempfn}%
      \@footnotemark
    }%
}
\def\@xmpfootnotemark[#1]{%
  \begingroup
    \csname c@\@mpfn\endcsname #1\relax
    \unrestored@protected@xdef\@thefnmark{\thempfn}%
  \endgroup
  \@footnotemark
}
%    \end{macrocode}
%    TEMP PATCHES FOR TESTING
%    \begin{macrocode}

\endinput
%</footmisc>
%    \end{macrocode}
% \Finale
%