path: root/Master/texmf-dist/doc/latex/algorithmicx/algorithmicx.tex

\documentclass{article}
\usepackage{algorithmicx}
\usepackage[ruled]{algorithm}
\usepackage{algpseudocode}
\usepackage{algpascal}
\usepackage{algc}
%\algdisablelines


\newcommand{\alg}{\texttt{algorithmicx}}
\newcommand{\old}{\texttt{algorithmic}}
\newcommand{\euk}{Euclid}
\newcommand\ASTART{\bigskip\noindent\begin{minipage}[b]{0.5\linewidth}}
\newcommand\ACONTINUE{\end{minipage}\begin{minipage}[b]{0.5\linewidth}}
\newcommand\AENDSKIP{\end{minipage}\bigskip}
\newcommand\AEND{\end{minipage}}



\title{The \alg\ package\footnote{This is the documentation for the version 1.2
of the package. This package is released under LPPL.}}
\author{Sz\'asz J\'anos\\szaszjanos@users.sourceforge.net}



\begin{document}
\maketitle
\begin{abstract}
The \alg\ package provides many possibilities to customize the layout of algorithms. 
You can use one of the predefined layouts (\textbf{pseudocode}, \textbf{pascal} 
and \textbf{c} and others), with or without modifications, or you can define a 
completely new layout for your specific needs.
\end{abstract}
\tableofcontents




\section{Introduction}
All this has begun in my last year at the university. The only thing that I knew of 
\LaTeX\ was that it exists, and that it is ``good''. I started using it, but I needed to typeset some 
algorithms. So I begun searching for a good algorithmic style, and I have found the \old\ package. 
It was a great joy for me, and I started to use it\dots\ 
Well\dots\ Everything went nice, until I needed some block that wasn't defined in there. What to do? 
I was no \LaTeX\ guru, in fact I only knew the few basic macros. But there was no other way, so I opened 
the style file, and I copied one existing block, renamed a few things, and voil\`a! This (and some other 
small changes) where enough for me\dots

One year later --- for one good soul --- I had to make some really big changes on the style. And there on 
a sunny day came the idea. What if I would write some macros to let others create blocks automatically? 
And so I did! Since then the style was completely rewritten\dots\ several times\dots

I had fun writing it, may you have fun using it! I am still no \LaTeX\ guru, so if you are, and you find 
something really ugly in the style, please mail me! All ideas for improvements are welcome!

Thanks go to Benedek Zsuzsa, Ionescu Clara, Sz\H ocs Zolt\'an, Cseke Botond, Kanoc 
%Szotyori Zolt\'an Csaba
and many-many others. Without them I would have never started or continued \textbf{algorithmicx}.




\section{General informations}

\subsection{The package}
The package \textbf{algorithmicx} itself doesn't define any algorithmic commands, but gives 
a set of macros to define such a command set. You may use only \textbf{algorithmicx}, and define 
the commands yourself, or you may use one of the predefined command sets.

These predefined command sets (layouts) are:
\begin{description}
\item[algpseudocode] has the same look\footnote{almost :-)} as the one defined in the
\old\ package. The main difference is that while the \old\ package doesn't 
allow you to modify predefined structures, or to create new ones, the \alg\ 
package gives you full control over the definitions (ok, there are some 
limitations --- you can not send mail with a, say, \verb:\For: command).
\item[algcompatible] is fully compatible with the \old\ package, it should be
used only in old documents.
\item[algpascal] aims to create a formatted pascal program, it performs 
automatic indentation (!), so you can transform a pascal program into an 
\textbf{algpascal} algorithm description with some basic substitution rules.
\item[algc] -- yeah, just like the \textbf{algpascal}\dots\ but for c\dots\ 
This layout is incomplete.
\end{description}

To create floating algorithms you will need \verb:algorithm.sty:. This file may or may not be
included in the \alg\ package. You can find it on CTAN, in the \old\ package.



\subsection{The algorithmic block}
Each algorithm begins with the \verb:\begin{algorithmic}[lines]: command, the 
optional \verb:lines: controls the line numbering: $0$ means no line numbering, 
$1$ means number every line, and $n$ means number lines $n$, $2n$, $3n$\dots\ until the
\verb:\end{algorithmic}: command, witch ends the algorithm.



\subsection{Simple lines}

A simple line of text is beginned with \verb:\State:. This macro marks the begin of every 
line. You don't need to use \verb:\State: before a command defined in the package, since 
these commands use automatically a new line.

To obtain a line that is not numbered, and not counted when counting the lines for line numbering
(in case you choose to number lines), use the \verb:Statex: macro. This macro jumps into a new line, 
the line gets no number, and any label will point to the previous numbered line.

We will call \textit{statament\/}s the lines starting with \verb:\State:. The \verb:\Statex: 
lines are not stataments.



\subsection{Placing comments in sources}\label{Putting comments in sources}

Comments may be placed everywhere in the source using the \verb:\Comment: macro 
(there are no limitations like those in the \old\ package), feel the freedom!
If you would like to change the form in witch comments are displayed, just 
change the \verb:\algorithmiccomment: macro:

\begin{verbatim}
\algrenewcommand{\algorithmiccomment}[1]{\hskip3em$\rightarrow$ #1}
\end{verbatim}

will result:
\medskip
\begin{algorithmic}[1]
\algrenewcommand{\algorithmiccomment}[1]{\hskip3em$\rightarrow$ #1}
\State $x\gets x+1$\Comment{Here is the new comment}
\end{algorithmic}



\subsection{Labels and references}
Use the \verb:\label: macro, as usual to label a line. When you use \verb:\ref: to reference 
the line, the \verb:\ref: will be subtitued with the corresponding line number. When using the 
\textbf{algorithmicx} package togedher with the \textbf{algorithm} package, then you can label 
both the algorithm and the line, and use the \verb:\algref: macro to reference a given line 
from a given algorithm:

\begin{verbatim}
\algref{<algorithm>}{<line>}
\end{verbatim}

\noindent\begin{minipage}[t]{0.5\linewidth}
\begin{verbatim}
The \textbf{while} in algorithm
\ref{euclid} ends in line
\ref{euclidendwhile}, so
\algref{euclid}{euclidendwhile}
is the line we seek.
\end{verbatim}
\end{minipage}\begin{minipage}[t]{0.5\linewidth}
The \textbf{while} in algorithm \ref{euclid} ends in line \ref{euclidendwhile},
so \algref{euclid}{euclidendwhile} is the line we seek.
\end{minipage}

\subsection{Breaking up long algorithms}

Sometimes you have a long algorithm that needs to be broken into parts, each on a
separate float. For this you can use the following:

\begin{description}
\item[]\verb:\algstore{<savename>}: saves the line number, indentation, open blocks of
the current algorithm and closes all blocks. If used, then this must be the last command
before closing the algorithmic block. Each saved algorithm must be continued later in the
document.
\item[]\verb:\algstore*{<savename>}: Like the above, but the algorithm must not be continued.
\item[]\verb:\algrestore{<savename>}: restores the state of the algorithm saved under
\verb:<savename>: in this algorithmic block. If used, then this must be the first command
in an algorithmic block. A save is deleted while restoring.
\item[]\verb:\algrestore*{<savename>}: Like the above, but the save will not be deleted, so it
can be restored again.
\end{description}

See example in the \textbf{Examples} section.

\subsection{Multiple layouts in the same document}

You can load multiple algorithmicx layouts in the same document. You can switch between the layouts
using the \verb:\alglanguage{<layoutname>}: command. After this command all new algorithmic
environments will use the given layout until the layout is changed again.




\section{The predefined layouts}

\subsection{The \textbf{algpseudocode} layout}\label{algpseudocode}
\alglanguage{pseudocode}
If you are familiar with the \old\ package, then you'll find it easy to 
switch. You can use the old algorithms with the \textbf{algcompatible} layout, but please
use the \textbf{algpseudocode} layout for new algorithms.

To use \textbf{algpseudocode}, simply load \verb:algpseudocode.sty::

\begin{verbatim}
\usepackage{algpseudocode}
\end{verbatim}

You don't need to manually load the \textbf{algorithmicx} package, as this is done by
\textbf{algpseudocode}.

The first algorithm one should write is the first algorithm ever (ok, 
an improved version), \textit{\euk's algorithm}:

\begin{algorithm}[H]
\caption{\euk's algorithm}\label{euclid}
\begin{algorithmic}[1]
\Procedure{\euk}{$a,b$}\Comment{The g.c.d. of a and b}
   \State $r\gets a\bmod b$
   \While{$r\not=0$}\Comment{We have the answer if r is 0}
      \State $a\gets b$
      \State $b\gets r$
      \State $r\gets a\bmod b$
   \EndWhile\label{euclidendwhile}
   \State \Return $b$\Comment{The gcd is b}
\EndProcedure
\end{algorithmic}
\end{algorithm}


Created with the following source:
\begin{verbatim}
\begin{algorithm}
\caption{Euclid's algorithm}\label{euclid}
\begin{algorithmic}[1]
\Procedure{Euclid}{$a,b$}\Comment{The g.c.d. of a and b}
   \State $r\gets a\bmod b$
   \While{$r\not=0$}\Comment{We have the answer if r is 0}
      \State $a\gets b$
      \State $b\gets r$
      \State $r\gets a\bmod b$
   \EndWhile\label{euclidendwhile}
   \State \textbf{return} $b$\Comment{The gcd is b}
\EndProcedure
\end{algorithmic}
\end{algorithm}
\end{verbatim}

The \verb:\State: stands at the beginning of each simple statement; the respective 
statement is put in a new line, with the needed indentation.
The \verb:\Procedure: \dots\verb:\EndProcedure: and 
\verb:\While: \dots\verb:\EndWhile: blocks (like any block defined in the 
\textbf{algpseudocode} layout) automatically indent their content.
The indentation of the source doesn't matter, so

\ASTART
\begin{verbatim}
\begin{algorithmic}[1]
\Repeat
\Comment{forever}
\State this\Until{you die.}
\end{algorithmic}
\end{verbatim}
\ACONTINUE
\begin{algorithmic}[1]
\Repeat
\Comment{forever}
\State this\Until{you die.}
\Statex
\end{algorithmic}
\AENDSKIP

But, generally, it is a good idea to keep the source indented, since you will find 
errors much easier. And your tex file looks better!

All examples and syntax descriptions will be shown as the previous 
example --- the left side shows the \LaTeX\ input, and the right side 
the algorithm, as it appears in your document. I'm cheating! Don't look 
in the \verb:algorithmicx.tex: file! Believe what the examples state! I may use some 
undocumented and dirty stuff to create all these examples. You might be more 
confused after opening \verb:algorithmicx.tex: as you was before.

In the case of syntax 
descriptions the text between $<$ and $>$ is symbolic, so if you type 
what you see on the left side, you will not get the algorithm on the 
right side. But if you replace the text between $<$ $>$ with a proper piece of 
algorithm, then you will probably get what you want. The parts between 
$[$ and $]$ are optional.


\subsubsection{The \textbf{for} block}
The \textbf{for} block may have one of the forms:

\ASTART
\begin{verbatim}
\For{<text>}
   <body>
\EndFor
\end{verbatim}
\ACONTINUE
\begin{algorithmic}[1]
\For{$<$text$>$}
   \State $<$body$>$
\EndFor
\end{algorithmic}
\AEND

\ASTART
\begin{verbatim}
\ForAll{<text>}
   <body>
\EndFor
\end{verbatim}
\ACONTINUE
\begin{algorithmic}[1]
\ForAll{$<$text$>$}
   \State $<$body$>$
\EndFor
\end{algorithmic}
\AENDSKIP

\noindent Example:

\ASTART
\begin{verbatim}
\begin{algorithmic}[1]
\State $sum\gets 0$
\For{$i\gets 1, n$}
   \State $sum\gets sum+i$
\EndFor
\end{algorithmic}
\end{verbatim}
\ACONTINUE
\begin{algorithmic}[1]
\State $sum\gets 0$
\For{$i\gets 1, n$}
   \State $sum\gets sum+i$
\EndFor
\Statex
\end{algorithmic}
\AEND

\subsubsection{The \textbf{while} block}
The \textbf{while} block has the form:

\ASTART
\begin{verbatim}
\While{<text>}
   <body>
\EndWhile
\end{verbatim}
\ACONTINUE
\begin{algorithmic}[1]
\While{$<$text$>$}
   \State $<$body$>$
\EndWhile
\end{algorithmic}
\AENDSKIP

\noindent Example:

\ASTART
\begin{verbatim}
\begin{algorithmic}[1]
\State $sum\gets 0$
\State $i\gets 1$
\While{$i\le n$}
   \State $sum\gets sum+i$
   \State $i\gets i+1$
\EndWhile
\end{algorithmic}
\end{verbatim}
\ACONTINUE
\begin{algorithmic}[1]
\State $sum\gets 0$
\State $i\gets 1$
\While{$i\le n$}
   \State $sum\gets sum+i$
   \State $i\gets i+1$
\EndWhile
\Statex
\end{algorithmic}
\AEND

\subsubsection{The \textbf{repeat} block}
The \textbf{repeat} block has the form:

\ASTART
\begin{verbatim}
\Repeat
   <body>
\Until{<text>}
\end{verbatim}
\ACONTINUE
\begin{algorithmic}[1]
\Repeat
   \State $<$body$>$
\Until{$<$text$>$}
\end{algorithmic}
\AENDSKIP

\noindent Example:

\ASTART
\begin{verbatim}
\begin{algorithmic}[1]
\State $sum\gets 0$
\State $i\gets 1$
\Repeat
   \State $sum\gets sum+i$
   \State $i\gets i+1$
\Until{$i>n$}
\end{algorithmic}
\end{verbatim}
\ACONTINUE
\begin{algorithmic}[1]
\State $sum\gets 0$
\State $i\gets 1$
\Repeat
   \State $sum\gets sum+i$
   \State $i\gets i+1$
\Until{$i>n$}
\Statex
\end{algorithmic}
\AEND

\subsubsection{The \textbf{if} block}
The \textbf{if} block has the form:

\ASTART
\begin{verbatim}
\If{<text>}
   <body>
[
\ElsIf{<text>}
   <body>
...
]
[
\Else
   <body>
]
\EndIf
\end{verbatim}
\ACONTINUE
\begin{algorithmic}[1]
\If{$<$text$>$}
   \State $<$body$>$
\Statex [
\ElsIf{$<$text$>$}
   \State $<$body$>$
\Statex \dots
\Statex ]
\Statex [
\Else
   \State $<$body$>$
\Statex ]
\EndIf
\end{algorithmic}
\AENDSKIP

\noindent Example:

\ASTART
\begin{verbatim}
\begin{algorithmic}[1]
\If{$quality\ge 9$}
   \State $a\gets perfect$
\ElsIf{$quality\ge 7$}
   \State $a\gets good$
\ElsIf{$quality\ge 5$}
   \State $a\gets medium$
\ElsIf{$quality\ge 3$}
   \State $a\gets bad$
\Else
   \State $a\gets unusable$
\EndIf
\end{algorithmic}
\end{verbatim}
\ACONTINUE
\begin{algorithmic}[1]
\If{$quality\ge 9$}
   \State $a\gets perfect$
\ElsIf{$quality\ge 7$}
   \State $a\gets good$
\ElsIf{$quality\ge 5$}
   \State $a\gets medium$
\ElsIf{$quality\ge 3$}
   \State $a\gets bad$
\Else
   \State $a\gets unusable$
\EndIf
\Statex
\end{algorithmic}
\AEND

\subsubsection{The \textbf{procedure} block}
The \textbf{procedure} block has the form:

\ASTART
\begin{verbatim}
\Procedure{<name>}{<params>}
   <body>
\EndProcedure
\end{verbatim}
\ACONTINUE
\begin{algorithmic}[1]
\Procedure{$<$name$>$}{$<$params$>$}
   \State $<$body$>$
\EndProcedure
\end{algorithmic}
\AENDSKIP

\noindent Example: See \euk's\ algorithm on page \pageref{euclid}.

\subsubsection{The \textbf{function} block}The 
\textbf{function} block has the same syntax as the \textbf{procedure} block:

\ASTART
\begin{verbatim}
\Function{<name>}{<params>}
   <body>
\EndFunction
\end{verbatim}
\ACONTINUE
\begin{algorithmic}[1]
\Function{$<$name$>$}{$<$params$>$}
   \State $<$body$>$
\EndFunction
\end{algorithmic}
\AEND

\subsubsection{The \textbf{loop} block}
The \textbf{loop} block has the form:

\ASTART
\begin{verbatim}
\Loop
   <body>
\EndLoop
\end{verbatim}
\ACONTINUE
\begin{algorithmic}[1]
\Loop
   \State $<$body$>$
\EndLoop
\end{algorithmic}
\AEND

\subsubsection{Other commands in this layout}

The starting conditions for the algorithm can be described with the \textbf{require} 
instruction, and its result with the \textbf{ensure} instruction.

A procedure call can be formatted with \verb:\Call:.

\ASTART
\begin{verbatim}
\Require something
\Ensure something
\Statex
\State \Call{Create}{10}
\end{verbatim}
\ACONTINUE
\begin{algorithmic}[1]
\Require something
\Ensure something
\Statex
\State \Call{Create}{10}
\end{algorithmic}
\AENDSKIP

\noindent Example:

\ASTART
\begin{verbatim}
\begin{algorithmic}[1]
\Require $x\ge5$
\Ensure $x\le-5$
\Statex
\While{$x>-5$}
   \State $x\gets x-1$
\EndWhile
\end{algorithmic}
\end{verbatim}
\ACONTINUE
\begin{algorithmic}[1]
\Require $x\ge5$
\Ensure $x\le-5$
\Statex
\While{$x>-5$}
   \State $x\gets x-1$
\EndWhile
\Statex
\end{algorithmic}
\AEND





\subsubsection{Package options}\label{algpseudocode package options}

The \texttt{algpseudocode} package supports the following options:

\begin{description}
\item[compatible/noncompatible]\ \textit{Obsolote, use the algcompatible layout instead.}\\
If you would like to use old 
algorithms, written with the \old\ package without (too much) 
modification, then use the \textbf{compatible} option. This option 
defines the uppercase version of the commands. Note that you still need 
to remove the \verb:[...]: comments (these comments appeared due to some 
limitations in the \old\ package, these limitations and comments are gone now).
The default \textbf{noncompatible} does not define the all uppercase 
commands.
\item[noend/end]\ \\With \textbf{noend} specified all \textbf{end \dots} 
lines are omitted. You get a somewhat smaller algorithm, and the ugly 
feeling, that something is missing\dots{} The \textbf{end} value is the 
default, it means, that all \textbf{end \dots} lines are in their right 
place.
\end{description}


\subsubsection{Changing command names}
One common thing for a pseudocode is to change the command names. Many people 
use many different kind of pseudocode command names. In \textbf{algpseudocode} 
all keywords are declared as \verb:\algorithmic<keyword>:. You can change them 
to output the text you need:

\bigskip\noindent\begin{minipage}[b]{0.5\linewidth}
\begin{verbatim}
\algrenewcommand\algorithmicwhile{\textbf{am\'\i g}}
\algrenewcommand\algorithmicdo{\textbf{v\'egezd el}}
\algrenewcommand\algorithmicend{\textbf{v\'ege}}
\begin{algorithmic}[1]
\State $x \gets 1$
\While{$x < 10$}
   \State $x \gets x + 1$
\EndWhile
\end{algorithmic}
\end{verbatim}
\end{minipage}
\begin{minipage}[b]{0.5\linewidth}
\begin{algorithmic}[1]
\algrenewcommand\algorithmicwhile{\textbf{am\'\i g}}
\algrenewcommand\algorithmicdo{\textbf{v\'egezd el}}
\algrenewcommand\algorithmicend{\textbf{v\'ege}}
\State $x \gets 1$
\While{$x < 10$}
   \State $x \gets x + 1$
\EndWhile
\Statex
\end{algorithmic}
\end{minipage}\bigskip

In some cases you may need to change even more (in the above example 
\textbf{am\'\i g} and \textbf{v\'ege} should be interchanged in the \verb:\EndWhile: 
text). Maybe the number of the parameters taken by some commands must be changed too.
this can be done with the command text customizing macros (see section 
\ref{custom text}). Here I'll give only some examples of the most common usage:

\bigskip\noindent\begin{minipage}[b]{0.5\linewidth}
\begin{verbatim}
\algrenewcommand\algorithmicwhile{\textbf{am\'\i g}}
\algrenewcommand\algorithmicdo{\textbf{v\'egezd el}}
\algrenewcommand\algorithmicend{\textbf{v\'ege}}
\algrenewtext{EndWhile}{\algorithmicwhile\ \algorithmicend}
\begin{algorithmic}[1]
\State $x \gets 1$
\While{$x < 10$}
   \State $x \gets x - 1$
\EndWhile
\end{algorithmic}
\end{verbatim}
\end{minipage}
\begin{minipage}[b]{0.5\linewidth}
\begin{algorithmic}[1]
\algrenewcommand\algorithmicwhile{\textbf{am\'\i g}}
\algrenewcommand\algorithmicdo{\textbf{v\'egezd el}}
\algrenewcommand\algorithmicend{\textbf{v\'ege}}
\algrenewtext{EndWhile}{\algorithmicwhile\ \algorithmicend}
\State $x \gets 1$
\While{$x < 10$}
   \State $x \gets x - 1$
\EndWhile
\Statex
\end{algorithmic}
\end{minipage}

\bigskip\noindent\begin{minipage}[b]{0.5\linewidth}
\begin{verbatim}
\algnewcommand\algorithmicto{\textbf{to}}
\algrenewtext{For}[3]%
  {\algorithmicfor\ #1 \gets #2 \algorithmicto\ #3 \algorithmicdo}
\begin{algorithmic}[1]
\State $p \gets 1$
\For{i}{1}{n}
   \State $p \gets p * i$
\EndFor
\end{algorithmic}
\end{verbatim}
\end{minipage}
\begin{minipage}[b]{0.5\linewidth}
\begin{algorithmic}[1]
\algnewcommand\algorithmicto{\textbf{to}}
\algrenewtext{For}[3]%
  {\algorithmicfor\ $#1 \gets #2$ \algorithmicto\ $#3$ \algorithmicdo}
\State $p \gets 1$
\For{i}{1}{n}
   \State $p \gets p * i$
\EndFor
\Statex
\end{algorithmic}
\end{minipage}\bigskip

You could create a translation package, that included after the \textbf{algpseudocode} 
package translates the keywords to the language you need.





\subsection{The \textbf{algpascal} layout}
\alglanguage{pascal}



The most important feature of the \textbf{algpascal} layout is that 
\textit{it performs automatically the block indentation}. In 
section \ref{algorithmicx} you will see how to define such 
automatically indented loops. Here is an example to demonstrate this 
feature:

\ASTART
\begin{verbatim}
\begin{algorithmic}[1]
\Begin
\State $sum:=0$;
\For{i=1}{n}\Comment{sum(i)}
   \State $sum:=sum+i$;
\State writeln($sum$);
\End.
\end{algorithmic}
\end{verbatim}
\ACONTINUE
\begin{algorithmic}[1]
\Begin
\State $sum:=0$;
\For{i=1}{n}\Comment{sum(i)}
   \State $sum:=sum+i$;
\State writeln($sum$);
\End.
\Statex
\end{algorithmic}
\AENDSKIP

Note, that the \verb:\For: is not closed explicitly, its end is 
detected automatically. Again, the indentation in the source doesn't
affect the output. 
In this layout every parameter passed to a command is put in 
mathematical mode.

\subsubsection{The \textbf{begin} \dots{} \textbf{end} block}

\noindent\begin{minipage}[b]{0.5\linewidth}
\begin{verbatim}
\Begin
   <body>
\End
\end{verbatim}
\ACONTINUE
\begin{algorithmic}[1]
\Begin
   \State $<$body$>$
\End
\end{algorithmic}
\AENDSKIP

The \verb:\Begin: \dots{} \verb:\End: block and the 
\verb:\Repeat: \dots{} \verb:\Until: block are the only blocks in 
the \textbf{algpascal} style (instead of \verb:\Begin: you may write 
\verb:\Asm:). This means, that every other loop is ended automatically 
after the following command (another loop, or a block).



\subsubsection{The \textbf{for} loop}

\noindent\begin{minipage}[b]{0.5\linewidth}
\begin{verbatim}
\For{<assign>}{<expr>}
   <command>
\end{verbatim}
\ACONTINUE
\begin{algorithmic}[1]
\For{<$\relax$assign$\relax$>}{<$\relax$expr$\relax$>}
   \State $<$command$>$
\end{algorithmic}
\AENDSKIP

The \textbf{For} loop (as all other loops) ends after the following command (a block counts
also as a single command).

\ASTART
\begin{verbatim}
\begin{algorithmic}[1]
\Begin
   \State $sum:=0$;
   \State $prod:=1$;
   \For{i:=1}{10}
      \Begin
         \State $sum:=sum+i$;
         \State $prod:=prod*i$;
      \End
\End.
\end{algorithmic}
\end{verbatim}
\ACONTINUE
\begin{algorithmic}[1]
\Begin
   \State $sum:=0$;
   \State $prod:=1$;
   \For{i:=1}{10}
      \Begin
         \State $sum:=sum+i$;
         \State $prod:=prod*i$;
      \End
\End.
\Statex
\end{algorithmic}
\AEND

\subsubsection{The \textbf{while} loop}

\noindent\begin{minipage}[b]{0.5\linewidth}
\begin{verbatim}
\While{<expression>}
   <command>
\end{verbatim}
\ACONTINUE
\begin{algorithmic}[1]
\While{<$\relax$expression$\relax$>}
   \State $<$command$>$
\end{algorithmic}
\AEND


\subsubsection{The \textbf{repeat}\dots\ \textbf{until} block}

\noindent\begin{minipage}[b]{0.5\linewidth}
\begin{verbatim}
\Repeat
   <body>
\Until{<expression>}
\end{verbatim}
\ACONTINUE
\begin{algorithmic}[1]
\Repeat
   \State $<$body$>$
\Until{<$\relax$expression$\relax$>}
\end{algorithmic}
\AEND

\subsubsection{The \textbf{if} command}

\noindent\begin{minipage}[b]{0.5\linewidth}
\begin{verbatim}
\If{<expression>}
   <command>
[
\Else
   <command>
]
\end{verbatim}
\ACONTINUE
\begin{algorithmic}[1]
\If{<$\relax$expression$\relax$>}
   \State $<$command$>$
\Statex \hskip-\algorithmicindent\hskip-\algorithmicindent[
\Else
   \State $<$command$>$
\Statex \hskip-\algorithmicindent\hskip-\algorithmicindent]
\end{algorithmic}
\AENDSKIP

Every \verb:\Else: matches the nearest \verb:\If:.

\subsubsection{The \textbf{procedure} command}

\noindent\begin{minipage}[b]{0.5\linewidth}
\begin{verbatim}
\Procedure <some text>
\end{verbatim}
\ACONTINUE
\begin{algorithmic}[1]
\Procedure $<$some text$>$
\end{algorithmic}
\AENDSKIP

\verb:\Procedure: just writes the ``procedure'' word on a new 
line... You will probably put a \verb:\Begin:\dots\ \verb:\End: 
block after it.


\subsubsection{The \textbf{function} command}

\noindent\begin{minipage}[b]{0.5\linewidth}
\begin{verbatim}
\Function<some text>
\end{verbatim}
\ACONTINUE
\begin{algorithmic}[1]
\Function $<$some text$>$
\end{algorithmic}
\AENDSKIP

Just like \textbf{Procedure}.



\subsection{The \textbf{algc} layout}

Sorry, the \textbf{algc} layout is unfinished.
The commands defined are:

\begin{itemize}
\item\verb:\{:\dots\ \verb:\}: block
\item\verb:\For: with 3 params
\item\verb:\If: with 1 param
\item\verb:\Else: with no params
\item\verb:\While: with 1 param
\item\verb:\Do: with no params
\item\verb:\Function: with 3 params
\item\verb:\Return: with no params
\end{itemize}




\section{Custom algorithmic blocks}\label{algorithmicx}
\alglanguage{default}



\subsection{Blocks and loops}

Most of the environments defined in the standard layouts (and most probably 
the ones you will define) are divided in two categories:

\begin{description}
\item[Blocks] are the environments witch contain an arbitrary number of 
commands or nested blocks. Each block has a name, begins with a starting command 
and ends with an ending command. The commands in a block are 
indented by \verb:\algorithmicindent: (or another amount).

If your algorithm ends without closing all blocks, the \alg\ package gives
you a nice error. So be good, and close them all!

Blocks are all the environments defined in the \verb:algpseudocode: 
package, the \verb:\Begin: \dots \verb:\End: block in the 
\verb:algpascal: package, and some other ones.
\item[Loops] (Let us call them loops\dots) The loops are environments 
that include only one command, loop or block; a loop is closed 
automatically after this command. So loops have no ending commands. If 
your algorithm (or a block) ends before the single command of a loop, 
then this is considered an empty command, and the loop is closed. Feel 
free to leave open loops at the end of blocks!

Loops are most of the environments in the \verb:algpascal: and 
\verb:algc: packages.
\end{description}

For some rare constructions you can create mixtures of the two 
environments (see section \ref{setblock}).
Each block and loop may be continued with another one (like the \verb:If: 
with \verb:Else:).

\subsection{Defining blocks}\label{defblocks}

There are several commands to define blocks. The difference is in what is defined
beyond the block. The macro \verb:\algblock: defines a new block with starting and
ending entity.

\begin{verbatim}
\algblock[<block>]{<start>}{<end>}
\end{verbatim}

The defined commands have no parameters, and the text displayed by them is
\verb:\textbf{<start>}: and \verb:\textbf{<end>}:. You can change these texts later
(\ref{custom text}). 

With \verb:\algblockdefx: you can give the text to be output by the starting
and ending command and the number of parameters for these commands. In the text
reference with \#$n$ to the parameter number $n$. Observe that the text
is given in the form you define or redefine macros, and really, this is what happens.

\begin{verbatim}
\algblockdefx[<block>]{<start>}{<end>}
   [<startparamcount>][<default value>]{<start text>}
   [<endparamcount>][<default value>]{<end text>}
\end{verbatim}

This defines a new block called \verb:<block>:, \verb:<start>: opens the block, 
\verb:<end>: closes the block,
\verb:<start>: displays \verb:<start text>:, and has \verb:<startparamcount>: parameters,
\verb:<end>: displays \verb:<end text>:, and has \verb:<endparamcount>: parameters. 
For both \verb:<start>: and \verb:<end>:, if
\verb:<default value>: is given, then the first parameter is optional, and its default value
is \verb:<default value>:.

If you want to display different text (and to have a different number of parameters)
for \verb:<end>: at the end of different blocks, then use
the \verb:\algblockx: macro. Note that it is not possible to display different starting texts,
since it is not possible to start different blocks with the same command. The \verb:<start text>:
defined with \verb:\algblockx: has the same behavior as if defined with \verb:\algblockdefx:. All ending commands
not defined with \verb:\algblockx: will display the same text, and the ones defined with this
macro will display the different texts you specified.

\begin{verbatim}
\algblockx[<block>]{<start>}{<end>}
   [<startparamcount>][<default value>]{<start text>}
   [<endparamcount>][<default value>]{<end text>}
\end{verbatim}

If in the above definitions the \verb:<block>: is missing, then the name of the starting command
is used as block name. If a block with the given name
already exists, these macros don't define a new block, instead this it will be used the defined 
block. If \verb:<start>: or \verb:<end>: is empty, then
the definition does not define a new starting/ending command for the block, and then the
respective text must be missing from the definition. You may have more starting and ending commands
for one block. If the block name is missing, then a starting command must be given.


\bigskip\noindent\begin{minipage}[b]{0.5\linewidth}
\begin{verbatim}
\algblock[Name]{Start}{End}
\algblockdefx[NAME]{START}{END}%
   [2][Unknown]{Start #1(#2)}%
   {Ending}
\algblockdefx[NAME]{}{OTHEREND}%
   [1]{Until (#1)}
\begin{algorithmic}[1]
\Start
   \Start
      \START[One]{x}
      \END
      \START{0}
      \OTHEREND{\texttt{True}}
   \End
   \Start
   \End
\End
\end{algorithmic}
\end{verbatim}
\end{minipage}
\begin{minipage}[b]{0.5\linewidth}
{
\algblock[Name]{Start}{End}
\algblockdefx[NAME]{START}{END}%
   [2][Unknown]{Start #1(#2)}%
   {Ending}
\algblockdefx[NAME]{}{OTHEREND}%
   [1]{Until (#1)}
\begin{algorithmic}[1]
\Start
   \Start
      \START[One]{x}
      \END
      \START{0}
      \OTHEREND{\texttt{True}}
   \End
   \Start
   \End
\End
\Statex
\end{algorithmic}
}
\end{minipage}

\subsection{Defining loops}

The loop defining macros are similar to the block defining macros. A loop has no ending command
and ends after the first state, block or loop that follows the loop.
Since loops have no ending command, the macro \verb:\algloopx: would not have mutch sense.
The loop defining macros are:

\begin{verbatim}
\algloop[<loop>]{<start>}

\algloopdefx[<loop>]{<start>}
   [<startparamcount>][<default value>]{<start text>}
\end{verbatim}

Both create a loop named \verb:<loop>: with the starting command \verb:<start>:.
The second also sets the number of parameters, and the text displayed by the starting command.

\bigskip\noindent\begin{minipage}[b]{0.5\linewidth}
\begin{verbatim}
\algloop{For}
\algloopdefx{If}[1]{\textbf{If} #1 \textbf{then}}
\algblock{Begin}{End}
\begin{algorithmic}[1]
\For
   \Begin
   \If{$a < b$}
      \For
         \Begin
         \End
   \Begin
   \End
   \End
\end{algorithmic}
\end{verbatim}
\end{minipage}
\begin{minipage}[b]{0.5\linewidth}
{
\algloop{For}
\algloopdefx{If}%
   [1]{\textbf{If} #1 \textbf{then}}
\algblock{Begin}{End}
\begin{algorithmic}[1]
\For
   \Begin
   \If{$a < b$}
      \For
         \Begin
         \End
   \Begin
   \End
   \End
\Statex
\end{algorithmic}
}
\end{minipage}

\subsection{Continuing blocks and loops}

For each block/loop you may give commands that close the block or loop and open another
block or loop. A good example for this is the \textbf{if}~\dots~\textbf{then}~\dots~\textbf{else}
construct. The new block or loop can be closed or continued, as any other blocks and loops.

To create a continuing block use one of the following:

\begin{verbatim}
\algcblock[<new block>]{<old block>}{<continue>}{<end>}

\algcblockdefx[<new block>]{<old block>}{<continue>}{<end>}
   [<continueparamcount>][<default value>]{<continue text>}
   [<endparamcount>][<default value>]{<end text>}

\algcblockx[<new block>]{<old block>}{<continue>}{<end>}
   [<continueparamcount>][<default value>]{<continue text>}
   [<endparamcount>][<default value>]{<end text>}
\end{verbatim}

All three macros define a new block named \verb:<new block>:. If \verb:<new block>: is not given,
then \verb:<continue>: is used as the new block name. It is not allowed to have both
\verb:<new block>: missing, and \verb:<continue>: empty. The \verb:<continue>: command ends the
\verb:<old block>: block/loop and opens the \verb:<new block>: block. Since \verb:<continue>: may
end different blocks and loops, it can have different text
at the end of the different blocks/loops. If the \verb:<continue>: command doesn't find an
\verb:<old block>: to close, then an error is reported.

Create continuing loops with the followings:

\begin{verbatim}
\algcloop[<new loop>]{<old block>}{<continue>}

\algcloopdefx[<new loop>]{<old block>}{<continue>}
   [<continueparamcount>][<default value>]{<continue text>}

\algcloopx[<new loop>]{<old block>}{<continue>}
   [<continueparamcount>][<default value>]{<continue text>}
\end{verbatim}

These macros create a continuing loop, the \verb:<continue>: closes the \verb:<old block>:
block/loop, and opens a \verb:<new loop>: loop.

\bigskip\noindent\begin{minipage}[b]{0.5\linewidth}
\begin{verbatim}
\algblock{If}{EndIf}
\algcblock[If]{If}{ElsIf}{EndIf}
\algcblock{If}{Else}{EndIf}
\algcblockdefx[Strange]{If}{Eeee}{Oooo}
   [1]{\textbf{Eeee} "#1"}
   {\textbf{Wuuuups\dots}}
\begin{algorithmic}[1]
\If
   \If
   \ElsIf
   \ElsIf
      \If
      \ElsIf
      \Else
      \EndIf
   \EndIf
   \If
   \EndIf
\Eeee{Creep}
\Oooo
\end{algorithmic}
\end{verbatim}
\end{minipage}
\begin{minipage}[b]{0.5\linewidth}
{
\algblock{If}{EndIf}
\algcblock[If]{If}{ElsIf}{EndIf}
\algcblock{If}{Else}{EndIf}
\algcblockdefx[Strange]{If}{Eeee}{Oooo}
   [1]{\textbf{Eeee} "#1"}
   {\textbf{Wuuuups\dots}}
\begin{algorithmic}[1]
\If
   \If
   \ElsIf
   \ElsIf
      \If
      \ElsIf
      \Else
      \EndIf
   \EndIf
   \If
   \EndIf
\Eeee{Creep}
\Oooo
\Statex
\end{algorithmic}
}
\end{minipage}\bigskip

\bigskip\noindent\begin{minipage}[b]{0.5\linewidth}
\begin{verbatim}
\algloop{If}
\algcloop{If}{Else}
\algblock{Begin}{End}
\begin{algorithmic}[1]
\If
   \Begin
   \End
\Else
   \If
      \Begin
      \End
\end{algorithmic}
\end{verbatim}
\end{minipage}
\begin{minipage}[b]{0.5\linewidth}
{
\algloop{If}
\algcloop{If}{Else}
\algblock{Begin}{End}
\begin{algorithmic}[1]
\If
   \Begin
   \End
\Else
   \If
      \Begin
      \End
\Statex
\end{algorithmic}
}
\end{minipage}\bigskip



\subsection{Even more customisation}\label{setblock}

With the following macros you can give the indentation used by the new block (or loop),
and the number of stataments after that the "block" is automatically closed. This value is $\infty$
for blocks, 1 for loops, and 0 for stataments. There is a special value, 65535, meaning that the
defined "block" does not end automatically, but if it is enclosed in a block, then the ending
command of the block closes this "block" as well.

\begin{verbatim}
\algsetblock[<block>]{<start>}{<end>}
   {<lifetime>}{<indent>}

\algsetblockdefx[<block>]{<start>}{<end>}
   {<lifetime>}{<indent>}
   [<startparamcount>][<default value>]{<start text>}
   [<endparamcount>][<default value>]{<end text>}

\algsetblockx[<block>]{<start>}{<end>}
   {<lifetime>}{<indent>}
   [<startparamcount>][<default value>]{<start text>}
   [<endparamcount>][<default value>]{<end text>}

\algcsetblock[<new block>]{<old block>}{<continue>}{<end>}
   {<lifetime>}{<indent>}

\algcsetblockdefx[<new block>]{<old block>}{<continue>}{<stop>}
   {<lifetime>}{<indent>}
   [<continueparamcount>][<default value>]{<continue text>}
   [<endparamcount>][<default value>]{<end text>}

\algcsetblockx[<new block>]{<old block>}{<continue>}{<stop>}
   {<lifetime>}{<indent>}
   [<continueparamcount>][<default value>]{<continue text>}
   [<endparamcount>][<default value>]{<end text>}
\end{verbatim}

The \verb:<lifetime>: is the number of stataments after that the block is closed. An empty
\verb:<lifetime>: field means $\infty$. The \verb:<indent>: gives the indentation of the block.
Leave this field empty for the default indentation. The rest of the parameters has the same
function as for the previous macros.

\bigskip\noindent\begin{minipage}[b]{0.5\linewidth}
\begin{verbatim}
\algsetblock[Name]{Start}{Stop}{3}{1cm}
\algsetcblock[CName]{Name}{CStart}{CStop}{2}{2cm}
\begin{algorithmic}[1]
\Start
   \State 1
   \State 2
   \State 3
\State 4
\Start
   \State 1
\Stop
\State 2
\Start
   \State 1
\CStart
   \State 1
   \State 2
\State 3
\Start
   \State 1
\CStart
   \State 1
\CStop
\end{algorithmic}
\end{verbatim}
\end{minipage}
\begin{minipage}[b]{0.5\linewidth}
{
\algsetblock[Name]{Start}{Stop}{3}{1cm}
\algsetcblock[CName]{Name}{CStart}{CStop}{2}{2cm}
\begin{algorithmic}[1]
\Start
   \State 1
   \State 2
   \State 3
\State 4
\Start
   \State 1
\Stop
\State 2
\Start
   \State 1
\CStart
   \State 1
   \State 2
\State 3
\Start
   \State 1
\CStart
   \State 1
\CStop
\Statex
\end{algorithmic}
}
\end{minipage}\bigskip

The created environments behave as follows:

\begin{itemize}
\item It starts with \verb:\Start:. The nested environments are 
indented by 1 cm.
\item If it is followed by at least 3 environments (stataments), then it closes 
automatically after the third one.
\item If you put a \verb:\Stop: before the automatic closure, then this 
\verb:\Stop: closes the environment. \verb:CStart: closes a block called \verb:Name:
and opens a new one called \verb:CName: and having an indentaion of 2 cm.
\item \verb:CName: can be closed with \verb:CStop: or it is closed automatically after
2 environments.
\end{itemize}



\subsection{Parameters, custom text}\label{custom text}

With \verb:\algrenewtext: you can change the number of parameters, and the text displayed by the
commands. With \verb:algnotext: you can makes the vole output line disappear, but
it works only for ending commands, for beginning commands you will get an incorrect output.

\begin{verbatim}
\algrenewcommand[<block>]{<command>}
   [<paramcount>][<default value>]{<text>}

\algnotext[<block>]{<ending command>}
\end{verbatim}

If \verb:<block>: is missing, then the default text is changed, and if \verb:<block>: is given,
then the text displayed at the end of \verb:<block>: is changed.

To make a command output the default text at the end of a block (say, you have changed the text
for this block), use \verb:\algdefaulttext:.

\begin{verbatim}
\algdefaulttext[<block>]{<command>}
\end{verbatim}

If the \verb:<block>: is missing, than the default text itself will be set to the default value
(this is \verb:\textbf{<command>}:).



\subsection{The ONE defining macro}

All block and loop defining macros call the same macro. You may use this macro to gain a
better acces to what will be defined. This macro is \verb:\algdef:.

\begin{verbatim}
\algdef{<flags>}...
\end{verbatim}

Depending on the flags the macro can have many forms.

\begin{center}
\begin{tabular}{|c|l|}
\hline
\textbf{Flag}&\textbf{Meaning}\\
\hline
s&starting command, without text\\
S&starting command with text\\
c&continuing command, without text\\
C&continuing command, with default text\\
xC&continuing command, with block specific text\\
\hline
e&ending command, without text\\
E&continuing command, with default text\\
xE&continuing command, with block specific text\\
N&ending command, with default "no text"\\
xN&ending command, with no text for this block\\
\hline
b&block(default)\\
l&loop\\
L&loop closes after the given number of stataments\\
\hline
i&indentation specified\\
\hline
\end{tabular}
\end{center}

The \verb:<new block>: may be given for any combination of flags, and it is not allowed to have
\verb:<new block>: missing and \verb:<start>: missing/empty.
For c, C, xC an old block is expected. For s, S, c, C, xC the \verb:<start>: must be given.
For e, E, xE, N, xN the \verb:<end>: must be given. For L the \verb:<lifetime>: must be given. 
For i the \verb:<indent>: must be given.
For S, C, xC the starting text and related infos must be given. For E, xE the ending text must be given.
For each combination of flags give only the needed parameters, in the following order:

\begin{verbatim}
\algdef{<flags>}[<new block>]{<old block>}{<start>}{<end>}
   {<lifetime>}{<indent>}
   [<startparamcount>][<default value>]{<start text>}
   [<endparamcount>][<default value>]{<end text>}
\end{verbatim}

The block and loop defining macros call \verb:\algdef: with the following flags:
\begin{center}
\begin{tabular}{|l|l|}
\hline
\textbf{Macro}&\textbf{Meaning}\\
\hline
\verb:\algblock:&\verb:\algdef{se}:\\
\hline
\verb:\algcblock:&\verb:\algdef{ce}:\\
\hline
\verb:\algloop:&\verb:\algdef{sl}:\\
\hline
\verb:\algcloop:&\verb:\algdef{cl}:\\
\hline
\verb:\algsetblock:&\verb:\algdef{seLi}:\\
\hline
\verb:\algsetcblock:&\verb:\algdef{ceLi}:\\
\hline
\verb:\algblockx:&\verb:\algdef{SxE}:\\
\hline
\verb:\algblockdefx:&\verb:\algdef{SE}:\\
\hline
\verb:\algcblockx:&\verb:\algdef{CxE}:\\
\hline
\verb:\algcblockdefx:&\verb:\algdef{CE}:\\
\hline
\verb:\algsetblockx:&\verb:\algdef{SxELi}:\\
\hline
\verb:\algsetblockdefx:&\verb:\algdef{SELi}:\\
\hline
\verb:\algsetcblockx:&\verb:\algdef{CxELi}:\\
\hline
\verb:\algsetcblockdefx:&\verb:\algdef{CELi}:\\
\hline
\verb:\algloopdefx:&\verb:\algdef{Sl}:\\
\hline
\verb:\algcloopx:&\verb:\algdef{Cxl}:\\
\hline
\verb:\algcloopdefx:&\verb:\algdef{Cl}:\\
\hline
\end{tabular}
\end{center}


\vfill
\section{Examples}
\subsection{A full example using \textbf{algpseudocode}}


\begin{verbatim}
\documentclass{article}
\usepackage{algorithm}
\usepackage{algpseudocode}
\begin{document}
\begin{algorithm}
\caption{The Bellman-Kalaba algorithm}
\begin{algorithmic}[1]
\Procedure {BellmanKalaba}{$G$, $u$, $l$, $p$}
   \ForAll {$v \in V(G)$}
      \State $l(v) \leftarrow \infty$
   \EndFor
   \State $l(u) \leftarrow 0$
   \Repeat
      \For {$i \leftarrow 1, n$}
         \State $min \leftarrow l(v_i)$
         \For {$j \leftarrow 1, n$}
            \If {$min > e(v_i, v_j) + l(v_j)$}
               \State $min \leftarrow e(v_i, v_j) + l(v_j)$
               \State $p(i) \leftarrow v_j$
            \EndIf
         \EndFor
         \State $l'(i) \leftarrow min$
      \EndFor
      \State $changed \leftarrow l \not= l'$
      \State $l \leftarrow l'$
   \Until{$\neg changed$}
\EndProcedure
\Statex
\Procedure {FindPathBK}{$v$, $u$, $p$}
   \If {$v = u$}
      \State \textbf{Write} $v$
   \Else
      \State $w \leftarrow v$
      \While {$w \not= u$}
         \State \textbf{Write} $w$
         \State $w \leftarrow p(w)$
      \EndWhile
   \EndIf
\EndProcedure
\end{algorithmic}
\end{algorithm}
\end{document}
\end{verbatim}
\eject


\alglanguage{pseudocode}
\begin{algorithm}[h]
\caption{The Bellman-Kalaba algorithm}
\begin{algorithmic}[1]
\Procedure {BellmanKalaba}{$G$, $u$, $l$, $p$}
   \ForAll {$v \in V(G)$}
      \State $l(v) \leftarrow \infty$
   \EndFor
   \State $l(u) \leftarrow 0$
   \Repeat
      \For {$i \leftarrow 1, n$}
         \State $min \leftarrow l(v_i)$
         \For {$j \leftarrow 1, n$}
            \If {$min > e(v_i, v_j) + l(v_j)$}
               \State $min \leftarrow e(v_i, v_j) + l(v_j)$
               \State $p(i) \leftarrow v_j$
            \EndIf
         \EndFor
         \State $l'(i) \leftarrow min$
      \EndFor
      \State $changed \leftarrow l \not= l'$
      \State $l \leftarrow l'$
   \Until{$\neg changed$}
\EndProcedure
\Statex
\Procedure {FindPathBK}{$v$, $u$, $p$}
   \If {$v = u$}
      \State \textbf{Write} $v$
   \Else
      \State $w \leftarrow v$
      \While {$w \not= u$}
         \State \textbf{Write} $w$
         \State $w \leftarrow p(w)$
      \EndWhile
   \EndIf
\EndProcedure
\end{algorithmic}
\end{algorithm}
\eject




\subsection{Breaking up an algorithm}


\begin{verbatim}
\documentclass{article}
\usepackage{algorithm}
\usepackage{algpseudocode}
\begin{document}
\begin{algorithm}
\caption{Part 1}
\begin{algorithmic}[1]
\Procedure {BellmanKalaba}{$G$, $u$, $l$, $p$}
   \ForAll {$v \in V(G)$}
      \State $l(v) \leftarrow \infty$
   \EndFor
   \State $l(u) \leftarrow 0$
   \Repeat
      \For {$i \leftarrow 1, n$}
         \State $min \leftarrow l(v_i)$
         \For {$j \leftarrow 1, n$}
            \If {$min > e(v_i, v_j) + l(v_j)$}
               \State $min \leftarrow e(v_i, v_j) + l(v_j)$
               \State \Comment For some reason we need to break here!
\algstore{bkbreak}
\end{algorithmic}
\end{algorithm}

And we need to put some additional text between\dots

\begin{algorithm}[h]
\caption{Part 2}
\begin{algorithmic}[1]
\algrestore{bkbreak}
               \State $p(i) \leftarrow v_j$
            \EndIf
         \EndFor
         \State $l'(i) \leftarrow min$
      \EndFor
      \State $changed \leftarrow l \not= l'$
      \State $l \leftarrow l'$
   \Until{$\neg changed$}
\EndProcedure
\end{algorithmic}
\end{algorithm}
\end{document}
\end{verbatim}
\eject


\alglanguage{pseudocode}
\begin{algorithm}[h]
\caption{Part 1}
\begin{algorithmic}[1]
\Procedure {BellmanKalaba}{$G$, $u$, $l$, $p$}
   \ForAll {$v \in V(G)$}
      \State $l(v) \leftarrow \infty$
   \EndFor
   \State $l(u) \leftarrow 0$
   \Repeat
      \For {$i \leftarrow 1, n$}
         \State $min \leftarrow l(v_i)$
         \For {$j \leftarrow 1, n$}
            \If {$min > e(v_i, v_j) + l(v_j)$}
               \State $min \leftarrow e(v_i, v_j) + l(v_j)$
               \State \Comment For some reason we need to break here!
\algstore{bkbreak}
\end{algorithmic}
\end{algorithm}

And we need to put some additional text between\dots

\begin{algorithm}[h]
\caption{Part 2}
\begin{algorithmic}[1]
\algrestore{bkbreak}
               \State $p(i) \leftarrow v_j$
            \EndIf
         \EndFor
         \State $l'(i) \leftarrow min$
      \EndFor
      \State $changed \leftarrow l \not= l'$
      \State $l \leftarrow l'$
   \Until{$\neg changed$}
\EndProcedure
\end{algorithmic}
\end{algorithm}
\eject




\subsection{Using multiple layouts}


\begin{verbatim}
\documentclass{article}
\usepackage{algorithm}
\usepackage{algpseudocode}
\usepackage{algpascal}
\begin{document}

\alglanguage{pseudocode}
\begin{algorithm}
\caption{A small pseudocode}
\begin{algorithmic}[1]
\State $s \gets 0$
\State $p \gets 0$
\For{$i \gets 1,\, 10$}
   \State $s \gets s + i$
   \State $p \gets p + s$
\EndFor
\end{algorithmic}
\end{algorithm}

\alglanguage{pascal}
\begin{algorithm}
\caption{The pascal version}
\begin{algorithmic}[1]
\State $s := 0$
\State $p := 0$
\For{i = 1}{10}
   \Begin
   \State $s := s + i$
   \State $p := p + s$
   \End
\end{algorithmic}
\end{algorithm}

\end{document}
\end{verbatim}
\eject


\alglanguage{pseudocode}
\begin{algorithm}
\caption{A small pseudocode}
\begin{algorithmic}[1]
\State $s \gets 0$
\State $p \gets 0$
\For{$i \gets 1,\, 10$}
   \State $s \gets s + i$
   \State $p \gets p + s$
\EndFor
\end{algorithmic}
\end{algorithm}

\alglanguage{pascal}
\begin{algorithm}
\caption{The pascal version}
\begin{algorithmic}[1]
\State $s := 0$
\State $p := 0$
\For{i = 1}{10}
   \Begin
   \State $s := s + i$
   \State $p := p + s$
   \End
\end{algorithmic}
\end{algorithm}
\eject



\section{Bugs}

If you have a question or find a bug you can contact me on:

\medskip
\textbf{szaszjanos@users.sourceforge.net}

\medskip
\noindent If possible, please create a small \LaTeX{} example related to your problem.



\end{document}