$Id$ Public domain. Notes on putting together the pretest and yearly release --karl. See ./packages.txt for info on regular updates, adding/removing platforms, etc. Coordinate schedule with: maintainers of: engines, LaTeX, GUST font, asymptote, context, texworks other parts of collection: protext, ctan, mactex. general lists To stop updating of certain packages before the general freeze: tlpkg/dev/tlnet-disabled-packages.txt On the day of the last tlnet update, Set frozen/1 in 00texlive.config.tlpsrc. Freeze should happen at that night's rebuild. Check if pretest mirrors need renewing, talk to mirror admins if so: http://tug.org/texlive/mirmon/ /home/httpd/html/texlive/mirmon/tlpretest-mirrors.txt Then, the next day, start building tlpretest: 0. Reset frozen to 0 in 00texlive.config.tlpsrc. 1a. Preserve final tlnet of current release: cd /home/ftp/texlive/tlnet cp -ar ../tlnet /home/ftp/historic/systems/texlive/YYYY/tlnet-final 1b. Set up tlpretest: Better to empty tlpretest, touch texlive.tlpdb; then --recreate should suffice. Update /home/ftp/texlive/tlpretest/README. Update pretest.html, notably including major changes this year. diff new and old bindirs to see if there are interesting new programs: \ls $lb >/tmp/now \ls $ib >/tmp/new comm -3 /tmp/now /tmp/new >/tmp/cm 2. Then switch to pretest in cron.tl: critical=--critical # push tlcritical pretest=--pretest # update tlpretest, not tlnet (if not frozen) net_frozen=false # update tlnet|tlpretest (per $pretest) (tlcritical will remain getting updated daily, even though it doesn't work with tlnet any more. That's ok. Or disable if you prefer.) First build happens below. 3. option adjustrepo 0 in tl-update-tlnet, since pretest shouldn't go to CTAN for updates. 4a. When starting trial builds (or earlier): Build/source/{version.ac,texk/{kpathsea,ptexenc}/version.ac: no /dev Also good to do other version/year updates as below. 4b. When starting pretest, basic updates for release year: Master/.mkisofsrc Master/release-texlive.txt Master/tlpkg/TeXLive/TLConfig.pm (including MinRelease) Master/tlpkg/bin/tl-update-tlnet Master/tlpkg/bin/tl-update-images Master/tlpkg/installer/texlive.png (tlpkg/doc/texlive-installer-graphic.xcf) Master/texmf-dist/web2c/texmfcnf.lua Master/texmf-dist/web2c/texmf.cnf # from Build/.../kpathsea (check/update copyright years in *.pm, tlmgr*, install-tl, tlpkg/installer) 5. Ensure version numbers in sources are updated; see list below. Then commit new binaries with tl-update-bindir. 6. After committing, run tex \\end to check that mktexfmt works. Also run fmtutil --all to check that all formats build, no config file problems. Then, so things will get redone later as another check: rm -rf ~/.texlive`date +%Y` # the new one 7. Check for Build-maintained updates to config files, etc. (and might have to merge back if Master was mistakenly updated): diff -ru0 --exclude=man --exclude=info \ Build/source/inst/texmf-dist Master/texmf-dist for p in *conv hbf2gf; do cp /home/ftp/mirror/rsync.tex.ac.uk/CTAN/language/chinese/CJK/cjk-4.8.4/doc/pdf/$p.pdf $p; done 8. Now, try a first update of tlpretest: force_rebuild=true cron.tl This will fail because pretest is not set up, but that's ok; the idea is to check the output and ensure all is as basically ok. 9. After that trial build, set recreate=--recreate # just once! to get catalogue updates, and again: mkdir /home/ftp/texlive/tlpretest/tlpkg touch !$/texlive.tlpdb force_rebuild=true cron.tl A. After tlnet freeze: Run tl-update-linked-scripts for consistency. In Master/tlpkg, update bundled Windows programs as needed: dviout texworks tlgs tlperl tlpsv In tlpkg/installer, update xz and wget if needed Update readme-html.dir/readme.en.html if needed run tlpkg/bin/htmltext to create readme-txt.dir/README.EN. Update texcollection DVD text: http://tug.org/texcollection/ http://puszcza.gnu.org.ua/projects/texcollection/ A.0. Specifics for tlperl update: cd $pg find tlperl -type f | \grep -v README.TEXLIVE | sort >/tmp/now tar tf newperl.tgz | \grep -v /\$ | sort >/tmp/new # or zipinfo -1 newperl.zip tar xf ..., or unzip -q ... comm -13 /tmp/now /tmp/new >/tmp/c2 comm -23 /tmp/now /tmp/new >/tmp/c1 svn rm `cat /tmp/c1` svn add --parents --no-auto-props `cat /tmp/c2` svn status | fgrep \? # shouldn't be any find tlperl -name \*.dll -o -name \*.exe | xargs svn propset svn:executable 1 find tlperl -type d -empty | xargs svn rm # repeat until no output update tlperl/README.TEXLIVE svn commit when ready ... B. Build a test ISO image for initial TeX Collection testing: In cron.tl, set images_frozen=false. In tl-update-images, ensure V= the new YYYY and target=/.../test Update /home/ftp/texlive/Images/test/README. After successful image build, email tldistro@tug.org for info/review. Can disable image building again after the initial build for a while. M. As work proceeds, update the doc: MetaPost (in texmf-dist), other engine (in source) NEWS. Ensure all engine manuals updated in texmf-dist. Update texlive-en.tex (+ .pdf, .html), tell tldoc to translate. Don't neglect to update "Builders of the binaries". Update tlbuild.texi. Consider updates of core man pages in Build/source/texk/web2c/man. Remake updmap,fmtutil man pages with help2man: make -C Build/source/Work/texk/texlive/tl_scripts xupdmap.1 xfmtutil.1 They must be moved from /tmp into Master by hand. Also update ~www/texlive/doc/*.html: groff -mandoc -Thtml fmtutil.1 Texinfo manuals from Build to Master: tl-update-txi # then commit in texmf-dist/doc Man pages from Build to Master (after doing a build): tl-update-man # then run make in texmf-dist/doc/man # and check /tmp/so.rules against man1/Makefile N. Really test during pretest (really! don't leave it for knuth!): .fmt's sharable across endian-different platforms (including luatex). interactive mf '\drawdot (50,50); showit;' % and from * prompt O. Two days before the final pretest (i.e., to-be-published) build: Put date into NEWS and ChangeLog files. Update Build/source/tardate.ac. tlmgr version number in texmf-dist/scripts/texlive/NEWS. Rebuild test images so we get the new source. Tell developers no more commits: akira, takuji, luigi, mojca. P. The day before the final pretest: option adjustrepo 1 in tl-update-tlnet, else install-tl-unx won't go to ctan Update Master/source: xz wget w32tex-src texlive*source mactexdoc install-tl-unx.tar.gz Q. After final build, to do total freeze: In cron.tl, set *_frozen=true. Probably also just disable the cron entry. When finalizing sources (any time in the new year, can be early, before initial builds in any case): - update version numbers, years, and copyright years in: top level version.ac dvipdfm-x:configure.ac dvipdfmx.c xbb.c dvips: configure.ac NEWS dvips.c dvips.h afm2tfm.c dvips.texi kpathsea: version.ac NEWS kpsewhich.c doc/kpathsea.texi texmf.cnf ptexenc: version.ac web2c: NEWS doc/web2c.texi ptexdir/ptex-base.ch,ptex_version.h pdftexdir/pdftex.web pdftexdir/pdftex_version.h texk/*/version.ac, libs/*/version.ac, utils/*/version.ac then reautoconf (6min), rebuild. install-tl, tlmgr.pl (copyright only) check *.c *.h sources in above for needed copyright year updates too. run ~karl/bin/tlversions to see+compare engine/etc. versions - if new kpathsea file types (kpsewhich --help-formats), update kpathsea.texi. - ask tldistro for patches. Making the big release: - unmount live install of last year's: umount /home/ftp/texlive/Contents/live hx=/home/ftp/historic/systems/texlive prev=2016 this=2017 mkdir $hx/$this cd /home/ftp/texlive/Images cp README.md $hx/$prev/ mv *.iso* *.torrent* $hx/$prev/ mv test/texlive2*.iso* . mv test/texlive*.tar.xz* $hx/$this/ # tar version only in historic update README (touch even if no real changes needed) and test/README (pretest over) - mactex (from tlpretest) hm=/home/ftp/historic/systems/mactex mkdir $hm/$prev cd ~ftp/tex/mactex mv *-*.pkg* $hm/$prev mv ~ftp/texlive/tlpretest/mactex*pkg* . ln -s mactex-20*.pkg MacTeX.pkg ln -s mactex-basic* BasicTeX.pkg ln -s mactex-ghost* Ghostscript.pkg for p in *.pkg; do md5sum $p >$p.md5; done # used on mactex web pages mkdir $hm/$this cp Extras*pdf MacTeXtras-*.zip $hm/$this - rest of tlnet cd /home/ftp/texlive/tlnet diff -qr . $hx/$prev/tlnet-final # should already be there from before, so: rm -rf [a-z]* mv ../tlpretest/[a-z]* . update README (touch even if no real changes needed) and ../tlpretest/README (pretest over) cp install-tl-unx.tar.gz $hx/$this/ - update local CTAN area to avoid mirroring everything back again: cy=/home/ftp/tex-archive/systems fx=/home/ftp/tex rm -rf $cy/texlive/tlnet/*; cp -ar * $cy/texlive/tlnet/ rm $cy/texlive/Images/*; cp -a ../Images/*.* $cy/texlive/Images/ rm $cy/texlive/Source/* cp -a $fx/mactex/* $cy/mac/mactex/ cp -a $fx/protext/dist/* $cy/windows/protext/ # probably already done - historic copy of TL web pages: cd /home/httpd/html/texlive mkdir $hx/$prev/web cp *.html !$ # remove tugstyle.css ref from bugs.html - tug.org stuff: change fstab mount /mnt/tl cd /mnt/tl perl install-tl # do full install to default location. rm /usr/local/texlive-rel; ln -s texlive/$this /usr/local/texlive-rel newsrc=!$/source mkdir $newsrc cp source/{install-tl,texlive,w32tex}*.tar.?z $newsrc ls -l !$ cp -a $newsrc/* $cy/texlive/Source/ mount /home/ftp/texlive/Contents/live cd && umount /mnt/tl update historic/systems with final proTeXt, when ready. https://bscw.fernuni-hagen.de ftp://ftp.fernuni-hagen.de/pub/windows/win32/ProTeXt/ update ~www/texlive web pages (search for $prev and $prev-1): acquire* - general bugs.html - general, also case of $prevprev at bottom doc.html - platform list, translation list pretest.html - done for this year, maybe transfer bugs quickinstall.html - paths upgrade.html - whether possible or not tlmgr-news.html - from texmf-dist/scripts/texlive/NEWS index.html - usual check for new Texinfo manuals to link to html versions: ~www/texinfohtml/ further web updates below. - announcements: CTAN @ ISO update: remove old version, re-enable tlnet mirroring. Dick @ updating MacTeX. Martin @ torrents. Siep @ w32client.html, Norbert @ debian,updmap-kanji.html. Nikola @ FreeBSD notes linked on bugs.html. pdftex maintainers @ updating pdftex sources with sync-pdftex.sh. - make tag + branch: (determine revision number from svn log, in case commits were mistakenly made) svn copy -r 44442 \ -m'texlive-2017.0 tag based on r44442' \ svn://tug.org/texlive/trunk svn://tug.org/texlive/tags/texlive-2017.0 svn copy -r 44442 \ -m'branch2017 branch based on r44442' \ svn://tug.org/texlive/trunk svn://tug.org/texlive/branches/branch2017 It's the same command, just different destinations. http://svnbook.red-bean.com/en/1.8/svn.branchmerge.html We do both a branch and a tag so that it's possible to easily compare the current state of the branch with its starting point (the tag). To check out the branch, for critical source fixes for the sake of during-the-year rebuilds or for the distros, if they request it: cd /home/texlive rm -rf branch # when starting a new year on tug mkdir branch; cd branch svn co file:///home/svn/texlive/branches/branch$this/Build/source . >&out When bug fixes are done, i.e., at another stable point, make another tag: #svn copy -r 44590 -m'texlive-2017.1 tag based on r44590, with critical luatex bug fixes' \ # svn://tug.org/texlive/trunk svn://tug.org/texlive/tags/texlive-2017.1 - update ~karl/bin/cron.tl, and reenable when feel ready. critical= pretest= images_frozen=true net_frozen=false all_frozen=false after release: - texcollection hy=/home/ftp/historic/systems/texcollection mkdir -p $hy/$this/packaging # # copy files from DVD: mount /mnt/tc cd /mnt/tc cp -R [A-T]* index* setup /home/ftp/historic/systems/texcollection/$this # # copy ctan snapshot for TUG members: ls -l ~www/members/ctan16-*.tar du !$ rm -i ~www/members/ctan16-*.tar # assuming it's hard-linked! nice -19 tar cf ~www/members/ctan`date +%y`-20170604.tar ctan chmod a=r ~www/members/ctan*.tar ls -l !$; du !$ # edit members/index.html mkdir /home/ftp/historic/systems/ctancd/$this ln ~www/members/ctan*.tar !$ # cd && umount /mnt/tc # cd $hy/$this/packaging # copy in files from texcollection svn, then: pdftoppm -gray -r 222 texcoll-cover.pdf temp # edit temp*.pgm to be just the cover. pnmcrop temp*.pgm | pnmtopng >~www/texcollection/texcollection$this.png cp texcoll-cover.pdf ~www/texcollection/texcollection$this.pdf # ~www/texcollection/index.html ~www/store/index.html /home/httpd/cgi-bin/tug-common.pl ~www/forms/current/memberapp.html # ~www/rss/tug.xml ~www/index.html - increment source versions, append /dev: Build/source/{version.ac,texk/{kpathsea,ptexenc}/version.ac Build/source/tardate.ac