# $Id$ # TeXLive::TLUtils.pm - the inevitable utilities for TeX Live. # Copyright 2007-2021 Norbert Preining, Reinhard Kotucha # This file is licensed under the GNU General Public License version 2 # or any later version. package TeXLive::TLUtils; my $svnrev = '$Revision$'; my $_modulerevision = ($svnrev =~ m/: ([0-9]+) /) ? $1 : "unknown"; sub module_revision { return $_modulerevision; } =pod =head1 NAME C - utilities used in TeX Live infrastructure =head1 SYNOPSIS use TeXLive::TLUtils; =head2 Platform detection TeXLive::TLUtils::platform(); TeXLive::TLUtils::platform_name($canonical_host); TeXLive::TLUtils::platform_desc($platform); TeXLive::TLUtils::win32(); TeXLive::TLUtils::unix(); =head2 System tools TeXLive::TLUtils::getenv($string); TeXLive::TLUtils::which($string); TeXLive::TLUtils::initialize_global_tmpdir(); TeXLive::TLUtils::tl_tmpdir(); TeXLive::TLUtils::tl_tmpfile(); TeXLive::TLUtils::xchdir($dir); TeXLive::TLUtils::wsystem($msg,@args); TeXLive::TLUtils::xsystem(@args); TeXLive::TLUtils::run_cmd($cmd); TeXLive::TLUtils::system_pipe($prog, $infile, $outfile, $removeIn, @args); =head2 File utilities TeXLive::TLUtils::dirname($path); TeXLive::TLUtils::basename($path); TeXLive::TLUtils::dirname_and_basename($path); TeXLive::TLUtils::tl_abs_path($path); TeXLive::TLUtils::dir_writable($path); TeXLive::TLUtils::dir_creatable($path); TeXLive::TLUtils::mkdirhier($path); TeXLive::TLUtils::rmtree($root, $verbose, $safe); TeXLive::TLUtils::copy($file, $target_dir); TeXLive::TLUtils::touch(@files); TeXLive::TLUtils::collapse_dirs(@files); TeXLive::TLUtils::removed_dirs(@files); TeXLive::TLUtils::download_file($path, $destination); TeXLive::TLUtils::setup_programs($bindir, $platform); TeXLive::TLUtils::tlcmp($file, $file); TeXLive::TLUtils::nulldev(); TeXLive::TLUtils::get_full_line($fh); =head2 Installer functions TeXLive::TLUtils::make_var_skeleton($path); TeXLive::TLUtils::make_local_skeleton($path); TeXLive::TLUtils::create_fmtutil($tlpdb,$dest); TeXLive::TLUtils::create_updmap($tlpdb,$dest); TeXLive::TLUtils::create_language_dat($tlpdb,$dest,$localconf); TeXLive::TLUtils::create_language_def($tlpdb,$dest,$localconf); TeXLive::TLUtils::create_language_lua($tlpdb,$dest,$localconf); TeXLive::TLUtils::time_estimate($totalsize, $donesize, $starttime) TeXLive::TLUtils::install_packages($from_tlpdb,$media,$to_tlpdb,$what,$opt_src, $opt_doc)>); TeXLive::TLUtils::do_postaction($how, $tlpobj, $do_fileassocs, $do_menu, $do_desktop, $do_script); TeXLive::TLUtils::announce_execute_actions($how, @executes, $what); TeXLive::TLUtils::add_symlinks($root, $arch, $sys_bin, $sys_man, $sys_info); TeXLive::TLUtils::remove_symlinks($root, $arch, $sys_bin, $sys_man, $sys_info); TeXLive::TLUtils::w32_add_to_path($bindir, $multiuser); TeXLive::TLUtils::w32_remove_from_path($bindir, $multiuser); TeXLive::TLUtils::setup_persistent_downloads(); =head2 Logging and debugging TeXLive::TLUtils::info($str1, ...); # output unless -q TeXLive::TLUtils::debug($str1, ...); # output if -v TeXLive::TLUtils::ddebug($str1, ...); # output if -vv TeXLive::TLUtils::dddebug($str1, ...); # output if -vvv TeXLive::TLUtils::log($str1, ...); # only to log file TeXLive::TLUtils::tlwarn($str1, ...); # warn on stderr and log TeXLive::TLUtils::tldie($str1, ...); # tlwarn and die TeXLive::TLUtils::debug_hash_str($label, HASH); # stringified HASH TeXLive::TLUtils::debug_hash($label, HASH); # warn stringified HASH TeXLive::TLUtils::backtrace(); # return call stack as string TeXLive::TLUtils::process_logging_options($texdir); # handle -q -v* -logfile =head2 Miscellaneous TeXLive::TLUtils::sort_uniq(@list); TeXLive::TLUtils::push_uniq(\@list, @items); TeXLive::TLUtils::member($item, @list); TeXLive::TLUtils::merge_into(\%to, \%from); TeXLive::TLUtils::texdir_check($texdir); TeXLive::TLUtils::quotify_path_with_spaces($path); TeXLive::TLUtils::conv_to_w32_path($path); TeXLive::TLUtils::native_slashify($internal_path); TeXLive::TLUtils::forward_slashify($path_from_user); TeXLive::TLUtils::give_ctan_mirror(); TeXLive::TLUtils::give_ctan_mirror_base(); TeXLive::TLUtils::compare_tlpobjs($tlpA, $tlpB); TeXLive::TLUtils::compare_tlpdbs($tlpdbA, $tlpdbB); TeXLive::TLUtils::report_tlpdb_differences(\%ret); TeXLive::TLUtils::tlnet_disabled_packages($root); TeXLive::TLUtils::mktexupd(); TeXLive::TLUtils::setup_sys_user_mode($optsref,$tmfc, $tmfsc, $tmfv, $tmfsv); TeXLive::TLUtils::prepend_own_path(); TeXLive::TLUtils::repository_to_array($str); =head2 JSON TeXLive::TLUtils::encode_json($ref); TeXLive::TLUtils::True(); TeXLive::TLUtils::False(); =head1 DESCRIPTION =cut # avoid -warnings. our $PERL_SINGLE_QUOTE; # we steal code from Text::ParseWords use vars qw( $::LOGFILE $::LOGFILENAME @::LOGLINES @::debug_hook @::ddebug_hook @::dddebug_hook @::info_hook @::install_packages_hook @::warn_hook $TeXLive::TLDownload::net_lib_avail $::checksum_method $::gui_mode $::machinereadable $::no_execute_actions $::regenerate_all_formats $JSON::false $JSON::true ); BEGIN { use Exporter (); use vars qw(@ISA @EXPORT_OK @EXPORT); @ISA = qw(Exporter); @EXPORT_OK = qw( &platform &platform_name &platform_desc &unix &getenv &which &initialize_global_tmpdir &dirname &basename &dirname_and_basename &tl_abs_path &dir_writable &dir_creatable &mkdirhier &rmtree © &touch &collapse_dirs &removed_dirs &install_package &install_packages &make_var_skeleton &make_local_skeleton &create_fmtutil &create_updmap &create_language_dat &create_language_def &create_language_lua &parse_AddFormat_line &parse_AddHyphen_line &sort_uniq &push_uniq &texdir_check &member "ewords "ify_path_with_spaces &conv_to_w32_path &native_slashify &forward_slashify &untar &unpack &merge_into &give_ctan_mirror &give_ctan_mirror_base &create_mirror_list &extract_mirror_entry &wsystem &xsystem &run_cmd &system_pipe &announce_execute_actions &add_symlinks &remove_symlinks &w32_add_to_path &w32_remove_from_path &tlcmp &time_estimate &compare_tlpobjs &compare_tlpdbs &report_tlpdb_differences &setup_persistent_downloads &mktexupd &setup_sys_user_mode &prepend_own_path &nulldev &get_full_line &sort_archs &repository_to_array &encode_json &True &False &SshURIRegex ); @EXPORT = qw(setup_programs download_file process_logging_options tldie tlwarn info log debug ddebug dddebug debug debug_hash_str debug_hash win32 xchdir xsystem run_cmd system_pipe sort_archs); } use Cwd; use Getopt::Long; use File::Temp; use TeXLive::TLConfig; $::opt_verbosity = 0; # see process_logging_options our $SshURIRegex = '^((ssh|scp)://([^@]*)@([^/]*)/|([^@]*)@([^:]*):).*$'; =head2 Platform detection =over 4 =item C If C<$^O =~ /MSWin/i> is true we know that we're on Windows and we set the global variable C<$::_platform_> to C. Otherwise we call C with the output of C as argument. The result is stored in a global variable C<$::_platform_>, and subsequent calls just return that value. =cut sub platform { unless (defined $::_platform_) { if ($^O =~ /^MSWin/i) { $::_platform_ = "win32"; } else { my $config_guess = "$::installerdir/tlpkg/installer/config.guess"; # We cannot rely on #! in config.guess but have to call /bin/sh # explicitly because sometimes the 'noexec' flag is set in # /etc/fstab for ISO9660 file systems. chomp (my $guessed_platform = `/bin/sh '$config_guess'`); # For example, if the disc or reader has hardware problems. die "$0: could not run $config_guess, cannot proceed, sorry" if ! $guessed_platform; $::_platform_ = platform_name($guessed_platform); } } return $::_platform_; } =item C Convert ORIG_PLATFORM, a canonical host name as returned by C, into a TeX Live platform name. CPU type is determined by a regexp, and any C name is replaced by C. For the OS value we need a list because what's returned is not likely to match our historical names, e.g., C returns C but we need C. This list contains old OSs which are no longer supported, just in case. If the environment variable TEXLIVE_OS_NAME is set, it is used as-is. =cut sub platform_name { my ($orig_platform) = @_; my $guessed_platform = $orig_platform; # try to parse out some bsd variants that use amd64. # We throw away everything after the "bsd" to elide version numbers, # as in amd64-unknown-midnightbsd1.2. $guessed_platform =~ s/^x86_64-(.*-k?)(free|net)bsd/amd64-$1$2bsd/; my $CPU; # CPU type as reported by config.guess. my $OS; # O/S type as reported by config.guess. ($CPU = $guessed_platform) =~ s/(.*?)-.*/$1/; $CPU =~ s/^alpha(.*)/alpha/; # alphaev whatever $CPU =~ s/mips64el/mipsel/; # don't distinguish mips64 and 32 el $CPU =~ s/powerpc64/powerpc/; # don't distinguish ppc64 $CPU =~ s/sparc64/sparc/; # don't distinguish sparc64 # armv6l-unknown-linux-gnueabihf -> armhf-linux (RPi) # armv7l-unknown-linux-gnueabi -> armel-linux (Android) if ($CPU =~ /^arm/) { $CPU = $guessed_platform =~ /hf$/ ? "armhf" : "armel"; } if ($ENV{"TEXLIVE_OS_NAME"}) { $OS = $ENV{"TEXLIVE_OS_NAME"}; } else { my @OSs = qw(aix cygwin darwin dragonfly freebsd hpux irix kfreebsd linux midnightbsd netbsd openbsd solaris); for my $os (@OSs) { # Match word boundary at the beginning of the os name so that # freebsd and kfreebsd are distinguished. # Do not match word boundary at the end of the os so that # solaris2 is matched. $OS = $os if $guessed_platform =~ /\b$os/; } } if (! $OS) { warn "$0: could not guess OS from config.guess string: $orig_platform"; $OS = "unknownOS"; } if ($OS eq "linux") { # deal with the special case of musl based distributions # config.guess returns # x86_64-pc-linux-musl # i386-pc-linux-musl $OS = "linuxmusl" if $guessed_platform =~ /\blinux-musl/; } if ($OS eq "darwin") { # We have two versions of Mac binary sets. # 10.x and newer -> x86_64-darwin [MacTeX] # 10.6/Snow Leopard through 10.x -> x86_64-darwinlegacy, if 64-bit # x changes every year. In 2020 (Big Sur) Apple started with 11.x. # # (BTW, uname -r numbers are larger by 4 than the Mac minor version. # We don't use uname numbers here.) # # this changes each year, per above: my $mactex_darwin = 13; # lowest minor rev supported by x86_64-darwin. # # Most robust approach is apparently to check sw_vers (os version, # returns "10.x" values), and sysctl (processor hardware). chomp (my $sw_vers = `sw_vers -productVersion`); my ($os_major,$os_minor) = split (/\./, $sw_vers); if ($os_major < 10) { warn "$0: only MacOSX is supported, not $OS $os_major.$os_minor " . " (from sw_vers -productVersion: $sw_vers)\n"; return "unknownmac-unknownmac"; } if ($os_major >= 11) { $CPU = "x86_64"; $OS = "darwin"; } elsif ($os_minor >= $mactex_darwin) { ; # sufficiently new 10.x, default is ok (x86_64-darwin). } elsif ($os_minor >= 6 && $os_minor < $mactex_darwin) { # in between, x86 hardware only. On 10.6 only, must check if 64-bit, # since if later than that, always 64-bit. my $is64 = $os_minor == 6 ? `/usr/sbin/sysctl -n hw.cpu64bit_capable` >= 1 : 1; if ($is64) { $CPU = "x86_64"; $OS = "darwinlegacy"; } # if not 64-bit, default is ok (i386-darwin). } else { ; # older version, default is ok (i386-darwin, powerpc-darwin). } } elsif ($CPU =~ /^i.86$/) { $CPU = "i386"; # 586, 686, whatever } if (! defined $OS) { ($OS = $guessed_platform) =~ s/.*-(.*)/$1/; } return "$CPU-$OS"; } =item C Return a string which describes a particular platform identifier, e.g., given C we return C. =cut sub platform_desc { my ($platform) = @_; my %platform_name = ( 'aarch64-linux' => 'GNU/Linux on ARM64', 'alpha-linux' => 'GNU/Linux on DEC Alpha', 'amd64-freebsd' => 'FreeBSD on x86_64', 'amd64-kfreebsd' => 'GNU/kFreeBSD on x86_64', 'amd64-midnightbsd'=> 'MidnightBSD on x86_64', 'amd64-netbsd' => 'NetBSD on x86_64', 'armel-linux' => 'GNU/Linux on ARM', 'armhf-linux' => 'GNU/Linux on ARMv6/RPi', 'hppa-hpux' => 'HP-UX', 'i386-cygwin' => 'Cygwin on Intel x86', 'i386-darwin' => 'MacOSX legacy (10.5-10.6) on Intel x86', 'i386-freebsd' => 'FreeBSD on Intel x86', 'i386-kfreebsd' => 'GNU/kFreeBSD on Intel x86', 'i386-linux' => 'GNU/Linux on Intel x86', 'i386-linuxmusl' => 'GNU/Linux on Intel x86 with musl', 'i386-netbsd' => 'NetBSD on Intel x86', 'i386-openbsd' => 'OpenBSD on Intel x86', 'i386-solaris' => 'Solaris on Intel x86', 'mips-irix' => 'SGI IRIX', 'mipsel-linux' => 'GNU/Linux on MIPSel', 'powerpc-aix' => 'AIX on PowerPC', 'powerpc-darwin' => 'MacOSX legacy (10.5) on PowerPC', 'powerpc-linux' => 'GNU/Linux on PowerPC', 'sparc-linux' => 'GNU/Linux on Sparc', 'sparc-solaris' => 'Solaris on Sparc', 'universal-darwin' => 'MacOSX universal binaries', 'win32' => 'Windows', 'x86_64-cygwin' => 'Cygwin on x86_64', 'x86_64-darwin' => 'MacOSX current (10.13-) on x86_64', 'x86_64-darwinlegacy' => 'MacOSX legacy (10.6-) on x86_64', 'x86_64-dragonfly' => 'DragonFlyBSD on x86_64', 'x86_64-linux' => 'GNU/Linux on x86_64', 'x86_64-linuxmusl' => 'GNU/Linux on x86_64 with musl', 'x86_64-solaris' => 'Solaris on x86_64', ); # the inconsistency between amd64-freebsd and x86_64-linux is # unfortunate (it's the same hardware), but the os people say those # are the conventional names on the respective os's, so we follow suit. if (exists $platform_name{$platform}) { return "$platform_name{$platform}"; } else { my ($CPU,$OS) = split ('-', $platform); return "$CPU with " . ucfirst "$OS"; } } =item C Return C<1> if platform is Windows and C<0> otherwise. The test is currently based on the value of Perl's C<$^O> variable. =cut sub win32 { if ($^O =~ /^MSWin/i) { return 1; } else { return 0; } # the following needs config.guess, which is quite bad ... # return (&platform eq "win32")? 1:0; } =item C Return C<1> if platform is UNIX and C<0> otherwise. =cut sub unix { return (&platform eq "win32")? 0:1; } =back =head2 System Tools =over 4 =item C Get an environment variable. It is assumed that the environment variable contains a path. On Windows all backslashes are replaced by forward slashes as required by Perl. If this behavior is not desired, use C<$ENV{"$variable"}> instead. C<0> is returned if the environment variable is not set. =cut sub getenv { my $envvar=shift; my $var=$ENV{"$envvar"}; return 0 unless (defined $var); if (&win32) { $var=~s!\\!/!g; # change \ -> / (required by Perl) } return "$var"; } =item C C does the same as the UNIX command C, but it is supposed to work on Windows too. On Windows we have to try all the extensions given in the C environment variable. We also try without appending an extension because if C<$string> comes from an environment variable, an extension might already be present. =cut sub which { my ($prog) = @_; my @PATH; my $PATH = getenv('PATH'); if (&win32) { my @PATHEXT = split (';', getenv('PATHEXT')); push (@PATHEXT, ''); # in case argument contains an extension @PATH = split (';', $PATH); for my $dir (@PATH) { for my $ext (@PATHEXT) { if (-f "$dir/$prog$ext") { return "$dir/$prog$ext"; } } } } else { # not windows @PATH = split (':', $PATH); for my $dir (@PATH) { if (-x "$dir/$prog") { return "$dir/$prog"; } } } return 0; } =item C Initializes a directory for all temporary files. This uses C and thus honors various env variables like C, C, and C. =cut sub initialize_global_tmpdir { $::tl_tmpdir = File::Temp::tempdir(CLEANUP => 1); ddebug("TLUtils::initialize_global_tmpdir: creating global tempdir $::tl_tmpdir\n"); return ($::tl_tmpdir); } =item C Create a temporary directory which is removed when the program is terminated. =cut sub tl_tmpdir { initialize_global_tmpdir() if (!defined($::tl_tmpdir)); my $tmp = File::Temp::tempdir(DIR => $::tl_tmpdir, CLEANUP => 1); ddebug("TLUtils::tl_tmpdir: creating tempdir $tmp\n"); return ($tmp); } =item C Create a temporary file which is removed when the program is terminated. Returns file handle and file name. Arguments are passed on to C. =cut sub tl_tmpfile { initialize_global_tmpdir() if (!defined($::tl_tmpdir)); my ($fh, $fn) = File::Temp::tempfile(@_, DIR => $::tl_tmpdir, UNLINK => 1); ddebug("TLUtils::tl_tempfile: creating tempfile $fn\n"); return ($fh, $fn); } =item C C or die. =cut sub xchdir { my ($dir) = @_; chdir($dir) || die "$0: chdir($dir) failed: $!"; ddebug("xchdir($dir) ok\n"); } =item C Call C about what is being done starting with C<$msg>, then run C; C if unsuccessful and return the exit status. =cut sub wsystem { my ($msg,@args) = @_; info("$msg @args ...\n"); my $retval = system(@args); if ($retval != 0) { $retval /= 256 if $retval > 0; tlwarn("$0: command failed (status $retval): @args: $!\n"); } return $retval; } =item C Call C about what is being done, then run C, and die if unsuccessful. =cut sub xsystem { my (@args) = @_; ddebug("running system(@args)\n"); my $retval = system(@args); if ($retval != 0) { $retval /= 256 if $retval > 0; my $pwd = cwd (); die "$0: system(@args) failed in $pwd, status $retval"; } return $retval; } =item C Run shell command C<$cmd> and captures its output. Returns a list with CMD's output as the first element and the return value (exit code) as second. =cut sub run_cmd { my $cmd = shift; my $output = `$cmd`; $output = "" if ! defined ($output); # don't return undef my $retval = $?; if ($retval != 0) { $retval /= 256 if $retval > 0; } return ($output,$retval); } =item C Runs C<$prog> with C<@extraargs> redirecting stdin from C<$infile>, stdout to C<$outfile>. Removes C<$infile> if C<$removeIn> is true. =cut sub system_pipe { my ($prog, $infile, $outfile, $removeIn, @extraargs) = @_; my $progQuote = quotify_path_with_spaces($prog); if (win32()) { $infile =~ s!/!\\!g; $outfile =~ s!/!\\!g; } my $infileQuote = "\"$infile\""; my $outfileQuote = "\"$outfile\""; debug("TLUtils::system_pipe: calling $progQuote @extraargs < $infileQuote > $outfileQuote\n"); my $retval = system("$progQuote @extraargs < $infileQuote > $outfileQuote"); if ($retval != 0) { $retval /= 256 if $retval > 0; debug("TLUtils::system_pipe: system exit code = $retval\n"); return 0; } else { if ($removeIn) { debug("TLUtils::system_pipe: removing $infile\n"); unlink($infile); } return 1; } } =back =head2 File utilities =over 4 =item C Return both C and C. Example: ($dirpart,$filepart) = dirname_and_basename ($path); =cut sub dirname_and_basename { my $path=shift; my ($share, $base) = ("", ""); if (win32) { $path=~s!\\!/!g; } # do not try to make sense of paths ending with /.. return (undef, undef) if $path =~ m!/\.\.$!; if ($path=~m!/!) { # dirname("foo/bar/baz") -> "foo/bar" # eliminate `/.' path components while ($path =~ s!/\./!/!) {}; # UNC path? => first split in $share = //xxx/yy and $path = /zzzz if (win32() and $path =~ m!^(//[^/]+/[^/]+)(.*)$!) { ($share, $path) = ($1, $2); if ($path =~ m!^/?$!) { $path = $share; $base = ""; } elsif ($path =~ m!(/.*)/(.*)!) { $path = $share.$1; $base = $2; } else { $base = $path; $path = $share; } return ($path, $base); } # not a UNC path $path=~m!(.*)/(.*)!; # works because of greedy matching return ((($1 eq '') ? '/' : $1), $2); } else { # dirname("ignore") -> "." return (".", $path); } } =item C Return C<$path> with its trailing C removed. =cut sub dirname { my $path = shift; my ($dirname, $basename) = dirname_and_basename($path); return $dirname; } =item C Return C<$path> with any leading directory components removed. =cut sub basename { my $path = shift; my ($dirname, $basename) = dirname_and_basename($path); return $basename; } =item C # Other than Cwd::abs_path, tl_abs_path also works if the argument does not # yet exist as long as the path does not contain '..' components. =cut sub tl_abs_path { my $path = shift; if (win32) { $path=~s!\\!/!g; } if (-e $path) { $path = Cwd::abs_path($path); } elsif ($path eq '.') { $path = Cwd::getcwd(); } else{ # collapse /./ components $path =~ s!/\./!/!g; # no support for .. path components or for win32 long-path syntax # (//?/ path prefix) die "Unsupported path syntax" if $path =~ m!/\.\./! || $path =~ m!/\.\.$! || $path =~ m!^\.\.!; die "Unsupported path syntax" if win32() && $path =~ m!^//\?/!; if ($path !~ m!^(.:)?/!) { # relative path if (win32() && $path =~ /^.:/) { # drive letter my $dcwd; # starts with drive letter: current dir on drive $dcwd = Cwd::getdcwd ($1); $dcwd .= '/' unless $dcwd =~ m!/$!; return $dcwd.$path; } else { # relative path without drive letter my $cwd = Cwd::getcwd(); $cwd .= '/' unless $cwd =~ m!/$!; return $cwd . $path; } } # else absolute path } $path =~ s!/$!! unless $path =~ m!^(.:)?/$!; return $path; } =item C Tests whether its argument is a directory where we can create a directory. =cut sub dir_slash { my $d = shift; $d = "$d/" unless $d =~ m!/!; return $d; } # test whether subdirectories can be created in the argument sub dir_creatable { my $path=shift; #print STDERR "testing $path\n"; $path =~ s!\\!/!g if win32; return 0 unless -d $path; $path .= '/' unless $path =~ m!/$!; #print STDERR "testing $path\n"; my $d; for my $i (1..100) { $d = ""; # find a non-existent dirname $d = $path . int(rand(1000000)); last unless -e $d; } if (!$d) { tlwarn("Cannot find available testdir name\n"); return 0; } #print STDERR "creating $d\n"; return 0 unless mkdir $d; return 0 unless -d $d; rmdir $d; return 1; } =item C Tests whether its argument is writable by trying to write to it. This function is necessary because the built-in C<-w> test just looks at mode and uid/gid, which on Windows always returns true and even on Unix is not always good enough for directories mounted from a fileserver. =cut # The Unix test gives the wrong answer when used under Windows Vista # with one of the `virtualized' directories such as Program Files: # lacking administrative permissions, it would write successfully to # the virtualized Program Files rather than fail to write to the # real Program Files. Ugh. sub dir_writable { my ($path) = @_; return 0 unless -d $path; $path =~ s!\\!/!g if win32; $path .= '/' unless $path =~ m!/$!; my $i = 0; my $f; for my $i (1..100) { $f = ""; # find a non-existent filename $f = $path . int(rand(1000000)); last unless -e $f; } if (!$f) { tlwarn("Cannot find available testfile name\n"); return 0; } return 0 if ! open (TEST, ">$f"); my $written = 0; $written = (print TEST "\n"); close (TEST); unlink ($f); return $written; } =item C The function C does the same as the UNIX command C. It behaves differently depending on the context in which it is called: If called in void context it will die on failure. If called in scalar context, it will return 1/0 on sucess/failure. If called in list context, it returns 1/0 as first element and an error message as second, if an error occurred (and no second element in case of success). The optional parameter sets the permission bits. =cut sub mkdirhier { my ($tree,$mode) = @_; my $ret = 1; my $reterror; if (-d "$tree") { $ret = 1; } else { my $subdir = ""; # win32 is special as usual: we need to separate //servername/ part # from the UNC path, since (! -d //servername/) tests true $subdir = $& if ( win32() && ($tree =~ s!^//[^/]+/!!) ); @dirs = split (/[\/\\]/, $tree); for my $dir (@dirs) { $subdir .= "$dir/"; if (! -d $subdir) { if (defined $mode) { if (! mkdir ($subdir, $mode)) { $ret = 0; $reterror = "mkdir($subdir,$mode) failed: $!"; last; } } else { if (! mkdir ($subdir)) { $ret = 0; $reterror = "mkdir($subdir) failed for tree $tree: $!"; last; } } } } } if ($ret) { return(1); # nothing bad here returning 1 in any case, will # be ignored in void context, and give 1 in list context } else { if (wantarray) { return(0, $reterror); } elsif (defined wantarray) { return(0); } else { die "$0: $reterror"; } } } =item C The C function provides a convenient way to delete a subtree from the directory structure, much like the Unix command C. C takes three arguments: =over 4 =item * the root of the subtree to delete, or a reference to a list of roots. All of the files and directories below each root, as well as the roots themselves, will be deleted. =item * a boolean value, which if TRUE will cause C to print a message each time it examines a file, giving the name of the file, and indicating whether it's using C or C to remove it, or that it's skipping it. (defaults to FALSE) =item * a boolean value, which if TRUE will cause C to skip any files to which you do not have delete access (if running under VMS) or write access (if running under another OS). This will change in the future when a criterion for 'delete permission' under OSs other than VMS is settled. (defaults to FALSE) =back It returns the number of files successfully deleted. Symlinks are simply deleted and not followed. B There are race conditions internal to the implementation of C making it unsafe to use on directory trees which may be altered or moved while C is running, and in particular on any directory trees with any path components or subdirectories potentially writable by untrusted users. Additionally, if the third parameter is not TRUE and C is interrupted, it may leave files and directories with permissions altered to allow deletion (and older versions of this module would even set files and directories to world-read/writable!) Note also that the occurrence of errors in C can be determined I by trapping diagnostic messages using C<$SIG{__WARN__}>; it is not apparent from the return value. =cut #taken from File/Path.pm # my $Is_VMS = $^O eq 'VMS'; my $Is_MacOS = $^O eq 'MacOS'; # These OSes complain if you want to remove a file that you have no # write permission to: my $force_writeable = ($^O eq 'os2' || $^O eq 'dos' || $^O eq 'MSWin32' || $^O eq 'amigaos' || $^O eq 'MacOS' || $^O eq 'epoc'); sub rmtree { my($roots, $verbose, $safe) = @_; my(@files); my($count) = 0; $verbose ||= 0; $safe ||= 0; if ( defined($roots) && length($roots) ) { $roots = [$roots] unless ref $roots; } else { warn "No root path(s) specified"; return 0; } my($root); foreach $root (@{$roots}) { if ($Is_MacOS) { $root = ":$root" if $root !~ /:/; $root =~ s#([^:])\z#$1:#; } else { $root =~ s#/\z##; } (undef, undef, my $rp) = lstat $root or next; $rp &= 07777; # don't forget setuid, setgid, sticky bits if ( -d _ ) { # notabene: 0700 is for making readable in the first place, # it's also intended to change it to writable in case we have # to recurse in which case we are better than rm -rf for # subtrees with strange permissions chmod($rp | 0700, ($Is_VMS ? VMS::Filespec::fileify($root) : $root)) or warn "Can't make directory $root read+writeable: $!" unless $safe; if (opendir my $d, $root) { no strict 'refs'; if (!defined ${"\cTAINT"} or ${"\cTAINT"}) { # Blindly untaint dir names @files = map { /^(.*)$/s ; $1 } readdir $d; } else { @files = readdir $d; } closedir $d; } else { warn "Can't read $root: $!"; @files = (); } # Deleting large numbers of files from VMS Files-11 filesystems # is faster if done in reverse ASCIIbetical order @files = reverse @files if $Is_VMS; ($root = VMS::Filespec::unixify($root)) =~ s#\.dir\z## if $Is_VMS; if ($Is_MacOS) { @files = map("$root$_", @files); } else { @files = map("$root/$_", grep $_!~/^\.{1,2}\z/s,@files); } $count += rmtree(\@files,$verbose,$safe); if ($safe && ($Is_VMS ? !&VMS::Filespec::candelete($root) : !-w $root)) { print "skipped $root\n" if $verbose; next; } chmod $rp | 0700, $root or warn "Can't make directory $root writeable: $!" if $force_writeable; print "rmdir $root\n" if $verbose; if (rmdir $root) { ++$count; } else { warn "Can't remove directory $root: $!"; chmod($rp, ($Is_VMS ? VMS::Filespec::fileify($root) : $root)) or warn("and can't restore permissions to " . sprintf("0%o",$rp) . "\n"); } } else { if ($safe && ($Is_VMS ? !&VMS::Filespec::candelete($root) : !(-l $root || -w $root))) { print "skipped $root\n" if $verbose; next; } chmod $rp | 0600, $root or warn "Can't make file $root writeable: $!" if $force_writeable; print "unlink $root\n" if $verbose; # delete all versions under VMS for (;;) { unless (unlink $root) { warn "Can't unlink file $root: $!"; if ($force_writeable) { chmod $rp, $root or warn("and can't restore permissions to " . sprintf("0%o",$rp) . "\n"); } last; } ++$count; last unless $Is_VMS && lstat $root; } } } $count; } =item C =item C =item C Copy file C<$file> to directory C<$target_dir>, or to the C<$destfile> if the first argument is C<"-f">. No external programs are involved. Since we need C, the Perl module C is required. The time stamps are preserved and symlinks are created on Unix systems. On Windows, C<(-l $file)> will never return 'C' and so symlinks will be (uselessly) copied as regular files. If the argument is C<"-L"> and C<$file> is a symlink, the link is dereferenced before the copying is done. (If both C<"-f"> and C<"-L"> are desired, they must be given in that order, although the current code has no need to do this.) C invokes C if target directories do not exist. Files have mode C<0777> if they are executable and C<0666> otherwise, with the set bits in I cleared in each case. C<$file> can begin with a C prefix. If C<$file> is not readable, we return without copying anything. (This can happen when the database and files are not in perfect sync.) On the other file, if the destination is not writable, or the writing fails, that is a fatal error. =cut sub copy { #too verbose ddebug("TLUtils::copy(", join (",", @_), "\n"); my $infile = shift; my $filemode = 0; my $dereference = 0; if ($infile eq "-f") { # second argument is a file $filemode = 1; $infile = shift; } if ($infile eq "-L") { $dereference = 1; $infile = shift; } my $destdir=shift; # while we're trying to figure out the versioned containers. #debug("copy($infile, $destdir, filemode=$filemode)\n"); #debug("copy: backtrace:\n", backtrace(), "copy: end backtrace\n"); my $outfile; my @stat; my $mode; my $buffer; my $offset; my $filename; my $dirmode = 0755; my $blocksize = $TeXLive::TLConfig::BlockSize; $infile =~ s!^file://*!/!i; # remove file:/ url prefix $filename = basename "$infile"; if ($filemode) { # given a destination file $outfile = $destdir; $destdir = dirname($outfile); } else { $outfile = "$destdir/$filename"; } if (! -d $destdir) { my ($ret,$err) = mkdirhier ($destdir); die "mkdirhier($destdir) failed: $err\n" if ! $ret; } # if we should dereference, change $infile to refer to the link target. if (-l $infile && $dereference) { my $linktarget = readlink($infile); # The symlink target should always be relative, and we need to # prepend the directory containing the link in that case. # (Although it should never happen, if the symlink target happens # to already be absolute, do not prepend.) if ($linktarget !~ m,^/,) { $infile = Cwd::abs_path(dirname($infile)) . "/$linktarget"; } ddebug("TLUtils::copy: dereferencing symlink $infile -> $linktarget"); } if (-l $infile) { my $linktarget = readlink($infile); my $dest = "$destdir/$filename"; ddebug("TLUtils::copy: doing symlink($linktarget,$dest)" . " [from readlink($infile)]\n"); symlink($linktarget, $dest) || die "symlink($linktarget,$dest) failed: $!"; } else { if (! open (IN, $infile)) { warn "open($infile) failed, not copying: $!"; return; } binmode IN; $mode = (-x $infile) ? oct("0777") : oct("0666"); $mode &= ~umask; open (OUT, ">$outfile") || die "open(>$outfile) failed: $!"; binmode OUT; chmod ($mode, $outfile) || warn "chmod($mode,$outfile) failed: $!"; while ($read = sysread (IN, $buffer, $blocksize)) { die "read($infile) failed: $!" unless defined $read; $offset = 0; while ($read) { $written = syswrite (OUT, $buffer, $read, $offset); die "write($outfile) failed: $!" unless defined $written; $read -= $written; $offset += $written; } } close (OUT) || warn "close($outfile) failed: $!"; close (IN) || warn "close($infile) failed: $!";; @stat = lstat ($infile); die "lstat($infile) failed: $!" if ! @stat; utime ($stat[8], $stat[9], $outfile); } } =item C Update modification and access time of C<@files>. Non-existent files are created. =cut sub touch { my @files=@_; foreach my $file (@_) { if (-e $file) { utime time, time, $file; } else { if (open( TMP, ">$file")) { close(TMP); } else { warn "Can't create file $file: $!\n"; } } } } =item C Return a (more or less) minimal list of directories and files, given an original list of files C<@files>. That is, if every file within a given directory is included in C<@files>, replace all of those files with the absolute directory name in the return list. Any files which have sibling files not included are retained and made absolute. We try to walk up the tree so that the highest-level directory containing only directories or files that are in C<@files> is returned. (This logic may not be perfect, though.) This is not just a string function; we check for other directory entries existing on disk within the directories of C<@files>. Therefore, if the entries are relative pathnames, the current directory must be set by the caller so that file tests work. As mentioned above, the returned list is absolute paths to directories and files. For example, suppose the input list is dir1/subdir1/file1 dir1/subdir2/file2 dir1/file3 If there are no other entries under C, the result will be C. =cut sub collapse_dirs { my (@files) = @_; my @ret = (); my %by_dir; # construct hash of all directories mentioned, values are lists of the # files in that directory. for my $f (@files) { my $abs_f = Cwd::abs_path ($f); die ("oops, no abs_path($f) from " . `pwd`) unless $abs_f; (my $d = $abs_f) =~ s,/[^/]*$,,; my @a = exists $by_dir{$d} ? @{$by_dir{$d}} : (); push (@a, $abs_f); $by_dir{$d} = \@a; } # for each of our directories, see if we are given everything in # the directory. if so, return the directory; else return the # individual files. for my $d (sort keys %by_dir) { opendir (DIR, $d) || die "opendir($d) failed: $!"; my @dirents = readdir (DIR); closedir (DIR) || warn "closedir($d) failed: $!"; # initialize test hash with all the files we saw in this dir. # (These idioms are due to "Finding Elements in One Array and Not # Another" in the Perl Cookbook.) my %seen; my @rmfiles = @{$by_dir{$d}}; @seen{@rmfiles} = (); # see if everything is the same. my $ok_to_collapse = 1; for my $dirent (@dirents) { next if $dirent =~ /^\.(\.|svn)?$/; # ignore . .. .svn my $item = "$d/$dirent"; # prepend directory for comparison if (! exists $seen{$item}) { ddebug(" no collapse of $d because of: $dirent\n"); $ok_to_collapse = 0; last; # no need to keep looking after the first. } } push (@ret, $ok_to_collapse ? $d : @{$by_dir{$d}}); } if (@ret != @files) { @ret = &collapse_dirs (@ret); } return @ret; } =item C Returns all the directories from which all content will be removed. Here is the idea: =over 4 =item create a hashes by_dir listing all files that should be removed by directory, i.e., key = dir, value is list of files =item for each of the dirs (keys of by_dir and ordered deepest first) check that all actually contained files are removed and all the contained dirs are in the removal list. If this is the case put that directory into the removal list =item return this removal list =back =cut sub removed_dirs { my (@files) = @_; my %removed_dirs; my %by_dir; # construct hash of all directories mentioned, values are lists of the # files/dirs in that directory. for my $f (@files) { # what should we do with not existing entries???? next if (! -r "$f"); my $abs_f = Cwd::abs_path ($f); # the following is necessary because on win32, # abs_path("tl-portable") # returns # c:\tl test\... # and not forward slashes, while, if there is already a forward / # in the path, also the rest is done with forward slashes. $abs_f =~ s!\\!/!g if win32(); if (!$abs_f) { warn ("oops, no abs_path($f) from " . `pwd`); next; } (my $d = $abs_f) =~ s,/[^/]*$,,; my @a = exists $by_dir{$d} ? @{$by_dir{$d}} : (); push (@a, $abs_f); $by_dir{$d} = \@a; } # for each of our directories, see if we are removing everything in # the directory. if so, return the directory; else return the # individual files. for my $d (reverse sort keys %by_dir) { opendir (DIR, $d) || die "opendir($d) failed: $!"; my @dirents = readdir (DIR); closedir (DIR) || warn "closedir($d) failed: $!"; # initialize test hash with all the files we saw in this dir. # (These idioms are due to "Finding Elements in One Array and Not # Another" in the Perl Cookbook.) my %seen; my @rmfiles = @{$by_dir{$d}}; @seen{@rmfiles} = (); # see if everything is the same. my $cleandir = 1; for my $dirent (@dirents) { next if $dirent =~ /^\.(\.|svn)?$/; # ignore . .. .svn my $item = "$d/$dirent"; # prepend directory for comparison if ( ((-d $item) && (defined($removed_dirs{$item}))) || (exists $seen{$item}) ) { # do nothing } else { $cleandir = 0; last; } } if ($cleandir) { $removed_dirs{$d} = 1; } } return keys %removed_dirs; } =item C Returns the current running time and the estimated total time based on the total size, the already done size, and the start time. =cut sub time_estimate { my ($totalsize, $donesize, $starttime) = @_; if ($donesize <= 0) { return ("??:??", "??:??"); } my $curtime = time(); my $passedtime = $curtime - $starttime; my $esttotalsecs = int ( ( $passedtime * $totalsize ) / $donesize ); # # we change the display to show that passed time instead of the # estimated remaining time. We keep the old code and naming and # only initialize the $remsecs to the $passedtime instead. # my $remsecs = $esttotalsecs - $passedtime; my $remsecs = $passedtime; my $min = int($remsecs/60); my $hour; if ($min >= 60) { $hour = int($min/60); $min %= 60; } my $sec = $remsecs % 60; $remtime = sprintf("%02d:%02d", $min, $sec); if ($hour) { $remtime = sprintf("%02d:$remtime", $hour); } my $tmin = int($esttotalsecs/60); my $thour; if ($tmin >= 60) { $thour = int($tmin/60); $tmin %= 60; } my $tsec = $esttotalsecs % 60; $tottime = sprintf("%02d:%02d", $tmin, $tsec); if ($thour) { $tottime = sprintf("%02d:$tottime", $thour); } return($remtime, $tottime); } =item C Installs the list of packages found in C<@$what> (a ref to a list) into the TLPDB given by C<$to_tlpdb>. Information on files are taken from the TLPDB C<$from_tlpdb>. C<$opt_src> and C<$opt_doc> specify whether srcfiles and docfiles should be installed (currently implemented only for installation from uncompressed media). Returns 1 on success and 0 on error. =cut sub install_packages { my ($fromtlpdb,$media,$totlpdb,$what,$opt_src,$opt_doc) = @_; my $container_src_split = $fromtlpdb->config_src_container; my $container_doc_split = $fromtlpdb->config_doc_container; my $root = $fromtlpdb->root; my @packs = @$what; my $totalnr = $#packs + 1; my $td = length("$totalnr"); my $n = 0; my %tlpobjs; my $totalsize = 0; my $donesize = 0; my %tlpsizes; debug("TLUtils::install_packages: fromtlpdb.root=$root, media=$media," . " totlpdb.root=" . $totlpdb->root . " what=$what ($totalnr), opt_src=$opt_src, opt_doc=$opt_doc\n"); foreach my $p (@packs) { $tlpobjs{$p} = $fromtlpdb->get_package($p); if (!defined($tlpobjs{$p})) { die "STRANGE: $p not to be found in ", $fromtlpdb->root; } if ($media ne 'local_uncompressed') { # we use the container size as the measuring unit since probably # downloading will be the limiting factor $tlpsizes{$p} = $tlpobjs{$p}->containersize; $tlpsizes{$p} += $tlpobjs{$p}->srccontainersize if $opt_src; $tlpsizes{$p} += $tlpobjs{$p}->doccontainersize if $opt_doc; } else { # we have to add the respective sizes, that is checking for # installation of src and doc file $tlpsizes{$p} = $tlpobjs{$p}->runsize; $tlpsizes{$p} += $tlpobjs{$p}->srcsize if $opt_src; $tlpsizes{$p} += $tlpobjs{$p}->docsize if $opt_doc; my %foo = %{$tlpobjs{$p}->binsize}; for my $k (keys %foo) { $tlpsizes{$p} += $foo{$k}; } # all the packages sizes are in blocks, so transfer that to bytes $tlpsizes{$p} *= $TeXLive::TLConfig::BlockSize; } $totalsize += $tlpsizes{$p}; } my $starttime = time(); my @packs_again; # packages that we failed to download and should retry later foreach my $package (@packs) { my $tlpobj = $tlpobjs{$package}; my $reloc = $tlpobj->relocated; $n++; my ($estrem, $esttot) = time_estimate($totalsize, $donesize, $starttime); my $infostr = sprintf("Installing [%0${td}d/$totalnr, " . "time/total: $estrem/$esttot]: $package [%dk]", $n, int($tlpsizes{$package}/1024) + 1); info("$infostr\n"); foreach my $h (@::install_packages_hook) { &$h($n,$totalnr); } # push $package to @packs_again if download failed # (and not installing from disk). if (!$fromtlpdb->install_package($package, $totlpdb)) { tlwarn("TLUtils::install_packages: Failed to install $package\n"); if ($media eq "NET") { tlwarn(" $package will be retried later.\n"); push @packs_again, $package; } else { # return false as soon as one package failed, since we won't # be trying again. return 0; } } else { $donesize += $tlpsizes{$package}; } } # try to download packages in @packs_again again foreach my $package (@packs_again) { my $infostr = sprintf("Retrying to install: $package [%dk]", int($tlpsizes{$package}/1024) + 1); info("$infostr\n"); # return false if download failed again if (!$fromtlpdb->install_package($package, $totlpdb)) { return 0; } $donesize += $tlpsizes{$package}; } my $totaltime = time() - $starttime; my $totmin = int ($totaltime/60); my $totsec = $totaltime % 60; info(sprintf("Time used for installing the packages: %02d:%02d\n", $totmin, $totsec)); $totlpdb->save; return 1; } =item C Evaluates the C fields in the C<$tlpobj>. The first parameter can be either C or C. The second gives the TLPOBJ whos postactions should be evaluated, and the last four arguments specify what type of postactions should (or shouldn't) be evaluated. Returns 1 on success, and 0 on failure. =cut sub do_postaction { my ($how, $tlpobj, $do_fileassocs, $do_menu, $do_desktop, $do_script) = @_; my $ret = 1; if (!defined($tlpobj)) { tlwarn("do_postaction: didn't get a tlpobj\n"); return 0; } debug("running postaction=$how for " . $tlpobj->name . "\n") if $tlpobj->postactions; for my $pa ($tlpobj->postactions) { if ($pa =~ m/^\s*shortcut\s+(.*)\s*$/) { $ret &&= _do_postaction_shortcut($how, $tlpobj, $do_menu, $do_desktop, $1); } elsif ($pa =~ m/\s*filetype\s+(.*)\s*$/) { next unless $do_fileassocs; $ret &&= _do_postaction_filetype($how, $tlpobj, $1); } elsif ($pa =~ m/\s*fileassoc\s+(.*)\s*$/) { $ret &&= _do_postaction_fileassoc($how, $do_fileassocs, $tlpobj, $1); next; } elsif ($pa =~ m/\s*progid\s+(.*)\s*$/) { next unless $do_fileassocs; $ret &&= _do_postaction_progid($how, $tlpobj, $1); } elsif ($pa =~ m/\s*script\s+(.*)\s*$/) { next unless $do_script; $ret &&= _do_postaction_script($how, $tlpobj, $1); } else { tlwarn("do_postaction: don't know how to do $pa\n"); $ret = 0; } } # nothing to do return $ret; } sub _do_postaction_fileassoc { my ($how, $mode, $tlpobj, $pa) = @_; return 1 unless win32(); my ($errors, %keyval) = parse_into_keywords($pa, qw/extension filetype/); if ($errors) { tlwarn("parsing the postaction line >>$pa<< did not succeed!\n"); return 0; } # name can be an arbitrary string if (!defined($keyval{'extension'})) { tlwarn("extension of fileassoc postaction not given\n"); return 0; } my $extension = $keyval{'extension'}; # cmd can be an arbitrary string if (!defined($keyval{'filetype'})) { tlwarn("filetype of fileassoc postaction not given\n"); return 0; } my $filetype = $keyval{'filetype'}.'.'.$ReleaseYear; &log("postaction $how fileassoc for " . $tlpobj->name . ": $extension, $filetype\n"); if ($how eq "install") { TeXLive::TLWinGoo::register_extension($mode, $extension, $filetype); } elsif ($how eq "remove") { TeXLive::TLWinGoo::unregister_extension($mode, $extension, $filetype); } else { tlwarn("Unknown mode $how\n"); return 0; } return 1; } sub _do_postaction_filetype { my ($how, $tlpobj, $pa) = @_; return 1 unless win32(); my ($errors, %keyval) = parse_into_keywords($pa, qw/name cmd/); if ($errors) { tlwarn("parsing the postaction line >>$pa<< did not succeed!\n"); return 0; } # name can be an arbitrary string if (!defined($keyval{'name'})) { tlwarn("name of filetype postaction not given\n"); return 0; } my $name = $keyval{'name'}.'.'.$ReleaseYear; # cmd can be an arbitrary string if (!defined($keyval{'cmd'})) { tlwarn("cmd of filetype postaction not given\n"); return 0; } my $cmd = $keyval{'cmd'}; my $texdir = `kpsewhich -var-value=SELFAUTOPARENT`; chomp($texdir); my $texdir_bsl = conv_to_w32_path($texdir); $cmd =~ s!^("?)TEXDIR/!$1$texdir/!g; &log("postaction $how filetype for " . $tlpobj->name . ": $name, $cmd\n"); if ($how eq "install") { TeXLive::TLWinGoo::register_file_type($name, $cmd); } elsif ($how eq "remove") { TeXLive::TLWinGoo::unregister_file_type($name); } else { tlwarn("Unknown mode $how\n"); return 0; } return 1; } # alternate filetype (= progid) for an extension; # associated program shows up in `open with' menu sub _do_postaction_progid { my ($how, $tlpobj, $pa) = @_; return 1 unless win32(); my ($errors, %keyval) = parse_into_keywords($pa, qw/extension filetype/); if ($errors) { tlwarn("parsing the postaction line >>$pa<< did not succeed!\n"); return 0; } if (!defined($keyval{'extension'})) { tlwarn("extension of progid postaction not given\n"); return 0; } my $extension = $keyval{'extension'}; if (!defined($keyval{'filetype'})) { tlwarn("filetype of progid postaction not given\n"); return 0; } my $filetype = $keyval{'filetype'}.'.'.$ReleaseYear; &log("postaction $how progid for " . $tlpobj->name . ": $extension, $filetype\n"); if ($how eq "install") { TeXLive::TLWinGoo::add_to_progids($extension, $filetype); } elsif ($how eq "remove") { TeXLive::TLWinGoo::remove_from_progids($extension, $filetype); } else { tlwarn("Unknown mode $how\n"); return 0; } return 1; } sub _do_postaction_script { my ($how, $tlpobj, $pa) = @_; my ($errors, %keyval) = parse_into_keywords($pa, qw/file filew32/); if ($errors) { tlwarn("parsing the postaction line >>$pa<< did not succeed!\n"); return 0; } # file can be an arbitrary string if (!defined($keyval{'file'})) { tlwarn("filename of script not given\n"); return 0; } my $file = $keyval{'file'}; if (win32() && defined($keyval{'filew32'})) { $file = $keyval{'filew32'}; } my $texdir = `kpsewhich -var-value=SELFAUTOPARENT`; chomp($texdir); my @syscmd; if ($file =~ m/\.pl$/i) { # we got a perl script, call it via perl push @syscmd, "perl", "$texdir/$file"; } elsif ($file =~ m/\.texlua$/i) { # we got a texlua script, call it via texlua push @syscmd, "texlua", "$texdir/$file"; } else { # we got anything else, call it directly and hope it is excutable push @syscmd, "$texdir/$file"; } &log("postaction $how script for " . $tlpobj->name . ": @syscmd\n"); push @syscmd, $how, $texdir; my $ret = system (@syscmd); if ($ret != 0) { $ret /= 256 if $ret > 0; my $pwd = cwd (); warn "$0: calling post action script $file did not succeed in $pwd, status $ret"; return 0; } return 1; } sub _do_postaction_shortcut { my ($how, $tlpobj, $do_menu, $do_desktop, $pa) = @_; return 1 unless win32(); my ($errors, %keyval) = parse_into_keywords($pa, qw/type name icon cmd args hide/); if ($errors) { tlwarn("parsing the postaction line >>$pa<< did not succeed!\n"); return 0; } # type can be either menu or desktop if (!defined($keyval{'type'})) { tlwarn("type of shortcut postaction not given\n"); return 0; } my $type = $keyval{'type'}; if (($type ne "menu") && ($type ne "desktop")) { tlwarn("type of shortcut postaction $type is unknown (menu, desktop)\n"); return 0; } if (($type eq "menu") && !$do_menu) { return 1; } if (($type eq "desktop") && !$do_desktop) { return 1; } # name can be an arbitrary string if (!defined($keyval{'name'})) { tlwarn("name of shortcut postaction not given\n"); return 0; } my $name = $keyval{'name'}; # icon, cmd, args is optional my $icon = (defined($keyval{'icon'}) ? $keyval{'icon'} : ''); my $cmd = (defined($keyval{'cmd'}) ? $keyval{'cmd'} : ''); my $args = (defined($keyval{'args'}) ? $keyval{'args'} : ''); # hide can be only 0 or 1, and defaults to 1 my $hide = (defined($keyval{'hide'}) ? $keyval{'hide'} : 1); if (($hide ne "0") && ($hide ne "1")) { tlwarn("hide of shortcut postaction $hide is unknown (0, 1)\n"); return 0; } &log("postaction $how shortcut for " . $tlpobj->name . "\n"); if ($how eq "install") { my $texdir = `kpsewhich -var-value=SELFAUTOPARENT`; chomp($texdir); my $texdir_bsl = conv_to_w32_path($texdir); $icon =~ s!^TEXDIR/!$texdir/!; $cmd =~ s!^TEXDIR/!$texdir/!; # $cmd can be an URL, in which case we do NOT want to convert it to # w32 paths! if ($cmd !~ m!^\s*(https?://|ftp://)!) { if (!(-e $cmd) or !(-r $cmd)) { tlwarn("Target of shortcut action does not exist: $cmd\n") if $cmd =~ /\.(exe|bat|cmd)$/i; # if not an executable, just omit shortcut silently: no error return 1; } $cmd = conv_to_w32_path($cmd); } if ($type eq "menu" ) { TeXLive::TLWinGoo::add_menu_shortcut( $TeXLive::TLConfig::WindowsMainMenuName, $name, $icon, $cmd, $args, $hide); } elsif ($type eq "desktop") { TeXLive::TLWinGoo::add_desktop_shortcut( $name, $icon, $cmd, $args, $hide); } else { tlwarn("Unknown type of shortcut: $type\n"); return 0; } } elsif ($how eq "remove") { if ($type eq "menu") { TeXLive::TLWinGoo::remove_menu_shortcut( $TeXLive::TLConfig::WindowsMainMenuName, $name); } elsif ($type eq "desktop") { TeXLive::TLWinGoo::remove_desktop_shortcut($name); } else { tlwarn("Unknown type of shortcut: $type\n"); return 0; } } else { tlwarn("Unknown mode $how\n"); return 0; } return 1; } sub parse_into_keywords { my ($str, @keys) = @_; my @words = quotewords('\s+', 0, $str); my %ret; my $error = 0; while (@words) { $_ = shift @words; if (/^([^=]+)=(.*)$/) { $ret{$1} = $2; } else { tlwarn("parser found a invalid word in parsing keys: $_\n"); $error++; $ret{$_} = ""; } } for my $k (keys %ret) { if (!member($k, @keys)) { $error++; tlwarn("parser found invalid keyword: $k\n"); } } return($error, %ret); } =item C Announces that the actions given in C<$tlpobj> should be executed after all packages have been unpacked. C<$what> provides additional information. =cut sub announce_execute_actions { my ($type, $tlp, $what) = @_; # do simply return immediately if execute actions are suppressed return if $::no_execute_actions; if (defined($type) && ($type eq "regenerate-formats")) { $::regenerate_all_formats = 1; return; } if (defined($type) && ($type eq "files-changed")) { $::files_changed = 1; return; } if (defined($type) && ($type eq "rebuild-format")) { # rebuild-format must feed in a hashref of a parse_AddFormat_line data # the $tlp argument is not used $::execute_actions{'enable'}{'formats'}{$what->{'name'}} = $what; return; } if (!defined($type) || (($type ne "enable") && ($type ne "disable"))) { die "announce_execute_actions: enable or disable, not type $type"; } my (@maps, @formats, @dats); if ($tlp->runfiles || $tlp->srcfiles || $tlp->docfiles) { $::files_changed = 1; } $what = "map format hyphen" if (!defined($what)); foreach my $e ($tlp->executes) { if ($e =~ m/^add((Mixed|Kanji)?Map)\s+([^\s]+)\s*$/) { # save the refs as we have another =~ grep in the following lines my $a = $1; my $b = $3; $::execute_actions{$type}{'maps'}{$b} = $a if ($what =~ m/map/); } elsif ($e =~ m/^AddFormat\s+(.*)\s*$/) { my %r = TeXLive::TLUtils::parse_AddFormat_line("$1"); if (defined($r{"error"})) { tlwarn ("$r{'error'} in parsing $e for return hash\n"); } else { $::execute_actions{$type}{'formats'}{$r{'name'}} = \%r if ($what =~ m/format/); } } elsif ($e =~ m/^AddHyphen\s+(.*)\s*$/) { my %r = TeXLive::TLUtils::parse_AddHyphen_line("$1"); if (defined($r{"error"})) { tlwarn ("$r{'error'} in parsing $e for return hash\n"); } else { $::execute_actions{$type}{'hyphens'}{$r{'name'}} = \%r if ($what =~ m/hyphen/); } } else { tlwarn("Unknown execute $e in ", $tlp->name, "\n"); } } } =pod =item C =item C These two functions try to create/remove symlinks for binaries, man pages, and info files as specified by the options $sys_bin, $sys_man, $sys_info. The functions return 1 on success and 0 on error. On Windows it returns undefined. =cut sub add_link_dir_dir { my ($from,$to) = @_; my ($ret, $err) = mkdirhier ($to); if (!$ret) { tlwarn("$err\n"); return 0; } if (-w $to) { debug ("TLUtils::add_link_dir_dir: linking from $from to $to\n"); chomp (@files = `ls "$from"`); my $ret = 1; for my $f (@files) { # don't make a system-dir link to our special "man" link. if ($f eq "man") { debug ("not linking `man' into $to.\n"); next; } # # attempt to remove an existing symlink, but nothing else. unlink ("$to/$f") if -l "$to/$f"; # # if the destination still exists, skip it. if (-e "$to/$f") { tlwarn ("add_link_dir_dir: $to/$f exists; not making symlink.\n"); next; } # # try to make the link. if (symlink ("$from/$f", "$to/$f") == 0) { tlwarn ("add_link_dir_dir: symlink of $f from $from to $to failed: $!\n"); $ret = 0; } } return $ret; } else { tlwarn ("add_link_dir_dir: destination $to not writable, " . "no links from $from.\n"); return 0; } } sub remove_link_dir_dir { my ($from, $to) = @_; if ((-d "$to") && (-w "$to")) { debug("TLUtils::remove_link_dir_dir: removing links from $from to $to\n"); chomp (@files = `ls "$from"`); my $ret = 1; foreach my $f (@files) { next if (! -r "$to/$f"); if ($f eq "man") { debug("TLUtils::remove_link_dir_dir: not considering man in $to, it should not be from us!\n"); next; } if ((-l "$to/$f") && (readlink("$to/$f") =~ m;^$from/;)) { $ret = 0 unless unlink("$to/$f"); } else { $ret = 0; tlwarn ("TLUtils::remove_link_dir_dir: not removing $to/$f, not a link or wrong destination!\n"); } } # try to remove the destination directory, it might be empty and # we might have write permissions, ignore errors # `rmdir "$to" 2>/dev/null`; return $ret; } else { tlwarn ("TLUtils::remove_link_dir_dir: destination $to not writable, no removal of links done!\n"); return 0; } } sub add_remove_symlinks { my ($mode, $Master, $arch, $sys_bin, $sys_man, $sys_info) = @_; my $errors = 0; my $plat_bindir = "$Master/bin/$arch"; # nothing to do with symlinks on Windows, of course. return if win32(); my $info_dir = "$Master/texmf-dist/doc/info"; if ($mode eq "add") { $errors++ unless add_link_dir_dir($plat_bindir, $sys_bin); # bin if (-d $info_dir) { $errors++ unless add_link_dir_dir($info_dir, $sys_info); } } elsif ($mode eq "remove") { $errors++ unless remove_link_dir_dir($plat_bindir, $sys_bin); # bin if (-d $info_dir) { $errors++ unless remove_link_dir_dir($info_dir, $sys_info); } } else { die ("should not happen, unknown mode $mode in add_remove_symlinks!"); } # man my $top_man_dir = "$Master/texmf-dist/doc/man"; debug("TLUtils::add_remove_symlinks: $mode symlinks for man pages to $sys_man from $top_man_dir\n"); if (! -d $top_man_dir) { ; # better to be silent? #info("skipping add of man symlinks, no source directory $top_man_dir\n"); } else { my $man_doable = 1; if ($mode eq "add") { my ($ret, $err) = mkdirhier $sys_man; if (!$ret) { $man_doable = 0; tlwarn("$err\n"); $errors++; } } if ($man_doable) { if (-w $sys_man) { my $foo = `(cd "$top_man_dir" && echo *)`; my @mans = split (' ', $foo); chomp (@mans); foreach my $m (@mans) { my $mandir = "$top_man_dir/$m"; next unless -d $mandir; if ($mode eq "add") { $errors++ unless add_link_dir_dir($mandir, "$sys_man/$m"); } else { $errors++ unless remove_link_dir_dir($mandir, "$sys_man/$m"); } } #`rmdir "$sys_man" 2>/dev/null` if ($mode eq "remove"); } else { tlwarn("TLUtils::add_remove_symlinks: man symlink destination ($sys_man) not writable, " . "cannot $mode symlinks.\n"); $errors++; } } } # we collected errors in $errors, so return the negation of it if ($errors) { info("TLUtils::add_remove_symlinks: $mode of symlinks had $errors error(s), see messages above.\n"); return $F_ERROR; } else { return $F_OK; } } sub add_symlinks { return (add_remove_symlinks("add", @_)); } sub remove_symlinks { return (add_remove_symlinks("remove", @_)); } =pod =item C =item C These two functions try to add/remove the binary directory $bindir on Windows to the registry PATH variable. If running as admin user and $multiuser is set, the system path will be adjusted, otherwise the user path. After calling these functions TeXLive::TLWinGoo::broadcast_env() should be called to make the changes immediately visible. =cut sub w32_add_to_path { my ($bindir, $multiuser) = @_; return if (!win32()); my $path = TeXLive::TLWinGoo::get_system_env() -> {'/Path'}; $path =~ s/[\s\x00]+$//; &log("Old system path: $path\n"); $path = TeXLive::TLWinGoo::get_user_env() -> {'/Path'}; if ($path) { $path =~ s/[\s\x00]+$//; &log("Old user path: $path\n"); } else { &log("Old user path: none\n"); } my $mode = 'user'; if (TeXLive::TLWinGoo::admin() && $multiuser) { $mode = 'system'; } debug("TLUtils:w32_add_to_path: calling adjust_reg_path_for_texlive add $bindir $mode\n"); TeXLive::TLWinGoo::adjust_reg_path_for_texlive('add', $bindir, $mode); $path = TeXLive::TLWinGoo::get_system_env() -> {'/Path'}; $path =~ s/[\s\x00]+$//; &log("New system path: $path\n"); $path = TeXLive::TLWinGoo::get_user_env() -> {'/Path'}; if ($path) { $path =~ s/[\s\x00]+$//; &log("New user path: $path\n"); } else { &log("New user path: none\n"); } } sub w32_remove_from_path { my ($bindir, $multiuser) = @_; my $mode = 'user'; if (TeXLive::TLWinGoo::admin() && $multiuser) { $mode = 'system'; } debug("w32_remove_from_path: trying to remove $bindir in $mode\n"); TeXLive::TLWinGoo::adjust_reg_path_for_texlive('remove', $bindir, $mode); } =pod =item C Remove the file C<$what> if either the given C<$checksum> or C<$checksize> for C<$what> does not agree with our recomputation using C and C, respectively. If a check argument is not given, that check is not performed. If the checksums agree, the size is not checked. The return status is random. This unusual behavior (removing the given file) is because this is used for newly-downloaded files; see the calls in the C routine (which is the only caller). =cut sub check_file_and_remove { my ($xzfile, $checksum, $checksize) = @_; my $fn_name = (caller(0))[3]; debug("$fn_name $xzfile, $checksum, $checksize\n"); if (!$checksum && !$checksize) { tlwarn("$fn_name: neither checksum nor checksize " . "available for $xzfile, cannot check integrity"); return; } # The idea is that if one of the tests fail, we want to save a copy of # the input file for debugging. But we can't just omit removing the # file, since the caller depends on the removal. So we copy it to a # new temporary directory, which we want to persist, so can't use tl_tmpdir. my $check_file_tmpdir = undef; # only run checksum tests if we can actually compute the checksum if ($checksum && ($checksum ne "-1") && $::checksum_method) { my $tlchecksum = TeXLive::TLCrypto::tlchecksum($xzfile); if ($tlchecksum ne $checksum) { tlwarn("$fn_name: checksums differ for $xzfile:\n"); tlwarn("$fn_name: tlchecksum=$tlchecksum, arg=$checksum\n"); tlwarn("$fn_name: backtrace:\n" . backtrace()); # on Windows passing a pattern creates the tmpdir in PWD # which means that it will be tried to be created on the DVD # $check_file_tmpdir = File::Temp::tempdir("tlcheckfileXXXXXXXX"); $check_file_tmpdir = File::Temp::tempdir(); tlwarn("$fn_name: removing $xzfile, " . "but saving copy in $check_file_tmpdir\n"); copy($xzfile, $check_file_tmpdir); unlink($xzfile); return; } else { debug("$fn_name: checksums for $xzfile agree\n"); # if we have checked the checksum, we don't need to check the size, too return; } } if ($checksize && ($checksize ne "-1")) { my $filesize = (stat $xzfile)[7]; if ($filesize != $checksize) { tlwarn("$fn_name: removing $xzfile, sizes differ:\n"); tlwarn("$fn_name: tlfilesize=$filesize, arg=$checksize\n"); if (!defined($check_file_tmpdir)) { # the tmpdir should always be undefined, since we shouldn't get # here if the checksums failed, but test anyway. $check_file_tmpdir = File::Temp::tempdir("tlcheckfileXXXXXXXX"); tlwarn("$fn_name: saving copy in $check_file_tmpdir\n"); copy($xzfile, $check_file_tmpdir); } unlink($xzfile); return; } } # We cannot remove the file here, otherwise restoring of backups # or unwind packages might die. } =pod =item C If necessary, downloads C$what>, and then unpacks it into C<$targetdir>. C<@opts> is assigned to a hash and can contain the following keys: C (use this directory for downloaded files), C (check downloaded file against this checksum), C (check downloaded file against this size), C (remove temporary files after operation). Returns a pair of values: in case of error return 0 and an additional explanation, in case of success return 1 and the name of the package. If C or C is C<-1>, no warnings about missing checksum/size is printed. This is used during restore and unwinding of failed updates. =cut sub unpack { my ($what, $target, %opts) = @_; # remove by default my $remove = (defined($opts{'remove'}) ? $opts{'remove'} : 1); my $tempdir = (defined($opts{'tmpdir'}) ? $opts{'tmpdir'} : tl_tmpdir()); my $checksum = (defined($opts{'checksum'}) ? $opts{'checksum'} : 0); my $size = (defined($opts{'size'}) ? $opts{'size'} : 0); if (!defined($what)) { return (0, "nothing to unpack"); } my $decompressorType; my $compressorextension; if ($what =~ m/\.tar\.$CompressorExtRegexp$/) { $compressorextension = $1; $decompressorType = $1 eq "gz" ? "gzip" : $1; } if (!$decompressorType) { return(0, "don't know how to unpack"); } # make sure that the found uncompressor type is also available if (!member($decompressorType, @{$::progs{'working_compressors'}})) { return(0, "unsupported container format $decompressorType"); } # only check the necessary compressor program my $decompressor = $::progs{$decompressorType}; my @decompressorArgs = @{$Compressors{$decompressorType}{'decompress_args'}}; my $fn = basename($what); my $pkg = $fn; $pkg =~ s/\.tar\.$compressorextension$//; my $remove_containerfile = $remove; my $containerfile = "$tempdir/$fn"; my $tarfile = "$tempdir/$fn"; $tarfile =~ s/\.$compressorextension$//; if ($what =~ m,^(https?|ftp)://, || $what =~ m!$SshURIRegex!) { # we are installing from the NET # check for the presence of $what in $tempdir if (-r $containerfile) { check_file_and_remove($containerfile, $checksum, $size); } # if the file is now not present, we can use it if (! -r $containerfile) { # try download the file and put it into temp if (!download_file($what, $containerfile)) { return(0, "downloading did not succeed (download_file failed)"); } # remove false downloads check_file_and_remove($containerfile, $checksum, $size); if ( ! -r $containerfile ) { return(0, "downloading did not succeed (check_file_and_remove failed)"); } } } else { # we are installing from local compressed files # copy it to temp with dereferencing of link target TeXLive::TLUtils::copy("-L", $what, $tempdir); check_file_and_remove($containerfile, $checksum, $size); if (! -r $containerfile) { return (0, "consistency checks failed"); } # we can remove it afterwards $remove_containerfile = 1; } if (!system_pipe($decompressor, $containerfile, $tarfile, $remove_containerfile, @decompressorArgs) || ! -f $tarfile) { unlink($tarfile, $containerfile); return(0, "Decompressing $containerfile failed"); } if (untar($tarfile, $target, 1)) { return (1, "$pkg"); } else { return (0, "untar failed"); } } =pod =item C Unpacks C<$tarfile> in C<$targetdir> (changing directories to C<$targetdir> and then back to the original directory). If C<$remove_tarfile> is true, unlink C<$tarfile> after unpacking. Assumes the global C<$::progs{"tar"}> has been set up. =cut # return 1 if success, 0 if failure. sub untar { my ($tarfile, $targetdir, $remove_tarfile) = @_; my $ret; my $tar = $::progs{'tar'}; # assume it's been set up # don't use the -C option to tar since Solaris tar et al. don't support it. # don't use system("cd ... && $tar ...") since that opens us up to # quoting issues. # so fall back on chdir in Perl. # debug("unpacking $tarfile in $targetdir\n"); my $cwd = cwd(); chdir($targetdir) || die "chdir($targetdir) failed: $!"; # on w32 don't extract file modified time, because AV soft can open # files in the mean time causing time stamp modification to fail my $taropt = win32() ? "xmf" : "xf"; if (system($tar, $taropt, $tarfile) != 0) { tlwarn("TLUtils::untar: $tar $taropt $tarfile failed (in $targetdir)\n"); $ret = 0; } else { $ret = 1; } unlink($tarfile) if $remove_tarfile; chdir($cwd) || die "chdir($cwd) failed: $!"; return $ret; } =item C Compare two files considering CR, LF, and CRLF as equivalent. Returns 1 if different, 0 if the same. =cut sub tlcmp { my ($filea, $fileb) = @_; if (!defined($fileb)) { die < Return contents of FILE as a string, converting all of CR, LF, and CRLF to just LF. =cut sub read_file_ignore_cr { my ($fname) = @_; my $ret = ""; local *FILE; open (FILE, $fname) || die "open($fname) failed: $!"; while () { s/\r\n?/\n/g; #warn "line is |$_|"; $ret .= $_; } close (FILE) || warn "close($fname) failed: $!"; return $ret; } =item C Populate the global C<$::progs> hash containing the paths to the programs C, C, C, C. The C<$bindir> argument specifies the path to the location of the C binaries, the C<$platform> gives the TeX Live platform name, used as the extension on our executables. If a program is not present in the TeX Live tree, we also check along PATH (without the platform extension.) If the C<$tlfirst> argument or the C envvar is set, prefer TL versions; else prefer system versions (except for Windows C, where we always use ours). Check many different downloads and compressors to determine what is working. Return 0 if failure, nonzero if success. =cut sub setup_programs { my ($bindir, $platform, $tlfirst) = @_; my $ok = 1; # tlfirst is (currently) not passed in by either the installer or # tlmgr, so it will be always false. # If it is not defined, we check for the env variable # TEXLIVE_PREFER_OWN # if (!defined($tlfirst)) { if ($ENV{'TEXLIVE_PREFER_OWN'}) { debug("setup_programs: TEXLIVE_PREFER_OWN is set!\n"); $tlfirst = 1; } } debug("setup_programs: preferring " . ($tlfirst ? "TL" : "system") . " versions\n"); my $isWin = ($^O =~ /^MSWin/i); if ($isWin) { # we need to make sure that we use our own tar, since # Windows system tar is stupid bsdtar ... setup_one("w32", 'tar', "$bindir/tar.exe", "--version", 1); $platform = "exe"; } else { # tar needs to be provided by the system, we not even check! $::progs{'tar'} = "tar"; if (!defined($platform) || ($platform eq "")) { # we assume that we run from uncompressed media, so we can call # platform() and thus also the config.guess script but we have to # setup $::installerdir because the platform script relies on it $::installerdir = "$bindir/../.."; $platform = platform(); } } # setup of the fallback downloaders my @working_downloaders; for my $dltype (@AcceptedFallbackDownloaders) { my $defprog = $FallbackDownloaderProgram{$dltype}; # do not warn on errors push @working_downloaders, $dltype if setup_one(($isWin ? "w32" : "unix"), $defprog, "$bindir/$dltype/$defprog.$platform", "--version", $tlfirst); } $::progs{'working_downloaders'} = [ @working_downloaders ]; my @working_compressors; for my $defprog (sort { $Compressors{$a}{'priority'} <=> $Compressors{$b}{'priority'} } keys %Compressors) { # do not warn on errors if (setup_one(($isWin ? "w32" : "unix"), $defprog, "$bindir/$defprog/$defprog.$platform", "--version", $tlfirst)) { push @working_compressors, $defprog; # also set up $::{'compressor'} if not already done # this selects the first one, but we might reset this depending on # TEXLIVE_COMPRESSOR setting, see below defined($::progs{'compressor'}) || ($::progs{'compressor'} = $defprog); } } $::progs{'working_compressors'} = [ @working_compressors ]; # check whether selected downloader/compressor is working # for downloader we allow 'lwp' as setting, too if ($ENV{'TEXLIVE_DOWNLOADER'} && $ENV{'TEXLIVE_DOWNLOADER'} ne 'lwp' && !TeXLive::TLUtils::member($ENV{'TEXLIVE_DOWNLOADER'}, @{$::progs{'working_downloaders'}})) { tlwarn(<= 2) { require Data::Dumper; use vars qw($Data::Dumper::Indent $Data::Dumper::Sortkeys $Data::Dumper::Purity); # -w pain $Data::Dumper::Indent = 1; $Data::Dumper::Sortkeys = 1; # stable output $Data::Dumper::Purity = 1; # recursive structures must be safe print STDERR "DD:dumping "; print STDERR Data::Dumper->Dump([\%::progs], [qw(::progs)]); } return $ok; } sub setup_one { my ($what, $p, $def, $arg, $tlfirst) = @_; my $setupfunc = ($what eq "unix") ? \&setup_unix_tl_one : \&setup_windows_tl_one ; if ($tlfirst) { if (&$setupfunc($p, $def, $arg)) { return(1); } else { return(setup_system_one($p, $arg)); } } else { if (setup_system_one($p, $arg)) { return(1); } else { return(&$setupfunc($p, $def, $arg)); } } } sub setup_system_one { my ($p, $arg) = @_; my $nulldev = nulldev(); ddebug("trying to set up system $p, arg $arg\n"); my $ret = system("$p $arg >$nulldev 2>&1"); if ($ret == 0) { debug("program $p found in path\n"); $::progs{$p} = $p; return(1); } else { debug("program $p not usable from path\n"); return(0); } } sub setup_windows_tl_one { my ($p, $def, $arg) = @_; debug("(w32) trying to set up $p, default $def, arg $arg\n"); if (-r $def) { my $prog = conv_to_w32_path($def); my $ret = system("$prog $arg >nul 2>&1"); # on windows if ($ret == 0) { debug("Using shipped $def for $p (tested).\n"); $::progs{$p} = $prog; return(1); } else { tlwarn("Setting up $p with $def as $prog didn't work\n"); system("$prog $arg"); return(0); } } else { debug("Default program $def not readable?\n"); return(0); } } # setup one prog on unix using the following logic: # - if the shipped one is -x and can be executed, use it # - if the shipped one is -x but cannot be executed, copy it. set -x # . if the copy is -x and executable, use it # - if the shipped one is not -x, copy it, set -x # . if the copy is -x and executable, use it sub setup_unix_tl_one { my ($p, $def, $arg) = @_; our $tmp; debug("(unix) trying to set up $p, default $def, arg $arg\n"); if (-r $def) { if (-x $def) { ddebug(" Default $def has executable permissions\n"); # we have to check for actual "executability" since a "noexec" # mount option may interfere, which is not taken into account by -x. my $ret = system("'$def' $arg >/dev/null 2>&1" ); # we are on Unix if ($ret == 0) { $::progs{$p} = $def; debug(" Using shipped $def for $p (tested).\n"); return(1); } else { ddebug(" Shipped $def has -x but cannot be executed, " . "trying tmp copy.\n"); } } # we are still here # out of some reasons we couldn't execute the shipped program # try to copy it to a temp directory and make it executable # # create tmp dir only when necessary $tmp = TeXLive::TLUtils::tl_tmpdir() unless defined($tmp); # probably we are running from uncompressed media and want to copy it to # some temporary location copy($def, $tmp); my $bn = basename($def); my $tmpprog = "$tmp/$bn"; chmod(0755,$tmpprog); # we do not check the return value of chmod, but check whether # the -x bit is now set, the only thing that counts if (! -x $tmpprog) { # hmm, something is going really bad, not even the copy is # executable. Fall back to normal path element ddebug(" Copied $p $tmpprog does not have -x bit, strange!\n"); return(0); } else { # check again for executability my $ret = system("$tmpprog $arg > /dev/null 2>&1"); if ($ret == 0) { # ok, the copy works debug(" Using copied $tmpprog for $p (tested).\n"); $::progs{$p} = $tmpprog; return(1); } else { # even the copied prog is not executable, strange ddebug(" Copied $p $tmpprog has x bit but not executable?!\n"); return(0); } } } else { # default program is not readable return(0); } } =item C Try to download the file given in C<$relpath> from C<$TeXLiveURL> into C<$destination>, which can be either a filename of simply C<|>. In the latter case a file handle is returned. Downloading first checks for the environment variable C, which takes various built-in values. If not set, the next check is for C and C. The former overrides the above specification devolving to C, and the latter overrides the default wget arguments. C must be defined so that the file the output goes to is the first argument after the C. Thus, for wget it would end in C<-O>. Use with care. =cut sub download_file { my ($relpath, $dest) = @_; # create output dir if necessary my $par; if ($dest ne "|") { $par = dirname($dest); mkdirhier ($par) unless -d "$par"; } my $url; if ($relpath =~ m;^file://*(.*)$;) { my $filetoopen = "/$1"; # $dest is a file name, we have to get the respective dirname if ($dest eq "|") { open(RETFH, "<$filetoopen") or die("Cannot open $filetoopen for reading"); # opening to a pipe always succeeds, so we return immediately return \*RETFH; } else { if (-r $filetoopen) { copy ($filetoopen, $par); return 1; } return 0; } } if ($relpath =~ m!$SshURIRegex!) { my $downdest; if ($dest eq "|") { my ($fh, $fn) = TeXLive::TLUtils::tl_tmpfile(); $downdest = $fn; } else { $downdest = $dest; } # massage ssh:// into the scp-acceptable scp:// $relpath =~ s!^ssh://!scp://!; my $retval = system("scp", "-q", $relpath, $downdest); if ($retval != 0) { $retval /= 256 if $retval > 0; my $pwd = cwd (); tlwarn("$0: system(scp -q $relpath $downdest) failed in $pwd, status $retval"); return 0; } if ($dest eq "|") { open(RETFH, "<$downdest") or die("Cannot open $downdest for reading"); # opening to a pipe always succeeds, so we return immediately return \*RETFH; } else { return 1; } } if ($relpath =~ /^(https?|ftp):\/\//) { $url = $relpath; } else { $url = "$TeXLiveURL/$relpath"; } my @downloader_trials; if ($ENV{'TEXLIVE_DOWNLOADER'}) { push @downloader_trials, $ENV{'TEXLIVE_DOWNLOADER'}; } elsif ($ENV{"TL_DOWNLOAD_PROGRAM"}) { push @downloader_trials, 'custom'; } else { @downloader_trials = qw/lwp curl wget/; } my $success = 0; for my $downtype (@downloader_trials) { if ($downtype eq 'lwp') { if (_download_file_lwp($url, $dest)) { $success = $downtype; last; } } if ($downtype eq "custom" || TeXLive::TLUtils::member($downtype, @{$::progs{'working_downloaders'}})) { if (_download_file_program($url, $dest, $downtype)) { $success = $downtype; last; } } } if ($success) { debug("TLUtils::download_file: downloading using $success succeeded\n"); return(1); } else { debug("TLUtils::download_file: tried to download using @downloader_trials, none succeeded\n"); return(0); } } sub _download_file_lwp { my ($url, $dest) = @_; if (!defined($::tldownload_server)) { ddebug("::tldownload_server not defined\n"); return(0); } if (!$::tldownload_server->enabled) { # try to reinitialize a disabled connection # disabling happens after 6 failed download trials # we just re-initialize the connection if (!setup_persistent_downloads()) { # setup failed, give up debug("reinitialization of LWP download failed\n"); return(0); } # we don't need to check for ->enabled, because # setup_persistent_downloads calls TLDownload->new() # which, if it succeeds, automatically set enabled to 1 } # we are still here, so try to download debug("persistent connection set up, trying to get $url (for $dest)\n"); my $ret = $::tldownload_server->get_file($url, $dest); if ($ret) { ddebug("downloading file via persistent connection succeeded\n"); return $ret; } else { debug("TLUtils::download_file: persistent connection ok," . " but download failed: $url\n"); debug("TLUtils::download_file: retrying with other downloaders.\n"); } # if we are still here, download with LWP didn't succeed. return(0); } sub _download_file_program { my ($url, $dest, $type) = @_; if (win32()) { $dest =~ s!/!\\!g; } debug("TLUtils::_download_file_program: $type $url $dest\n"); my $downloader; my $downloaderargs; my @downloaderargs; if ($type eq 'custom') { $downloader = $ENV{"TL_DOWNLOAD_PROGRAM"}; if ($ENV{"TL_DOWNLOAD_ARGS"}) { $downloaderargs = $ENV{"TL_DOWNLOAD_ARGS"}; @downloaderargs = split(' ', $downloaderargs); } } else { $downloader = $::progs{$FallbackDownloaderProgram{$type}}; @downloaderargs = @{$FallbackDownloaderArgs{$type}}; $downloaderargs = join(' ',@downloaderargs); } debug("downloading $url using $downloader $downloaderargs\n"); my $ret; if ($dest eq "|") { open(RETFH, "$downloader $downloaderargs - $url|") || die "open($url) via $downloader $downloaderargs failed: $!"; # opening to a pipe always succeeds, so we return immediately return \*RETFH; } else { $ret = system ($downloader, @downloaderargs, $dest, $url); # we have to reverse the meaning of ret because system has 0=success. $ret = ($ret ? 0 : 1); } # return false/undef in case the download did not succeed. return ($ret) unless $ret; debug("download of $url succeeded\n"); if ($dest eq "|") { return \*RETFH; } else { return 1; } } =item C Return C on Unix and C on Windows. =cut sub nulldev { return (&win32)? 'nul' : '/dev/null'; } =item C returns the next line from the file handle $fh, taking continuation lines into account (last character of a line is \, and no quoting is parsed). =cut # open my $f, '<', $file_name or die; # while (my $l = get_full_line($f)) { ... } # close $f or die; sub get_full_line { my ($fh) = @_; my $line = <$fh>; return undef unless defined $line; return $line unless $line =~ s/\\\r?\n$//; my $cont = get_full_line($fh); if (!defined($cont)) { tlwarn('Continuation disallowed at end of file'); $cont = ""; } $cont =~ s/^\s*//; return $line . $cont; } =back =head2 Installer Functions =over 4 =item C Generate a skeleton of empty directories in the C tree. =cut sub make_var_skeleton { my ($prefix) = @_; mkdirhier "$prefix/tex/generic/config"; mkdirhier "$prefix/fonts/map/dvipdfmx/updmap"; mkdirhier "$prefix/fonts/map/dvips/updmap"; mkdirhier "$prefix/fonts/map/pdftex/updmap"; mkdirhier "$prefix/fonts/pk"; mkdirhier "$prefix/fonts/tfm"; mkdirhier "$prefix/web2c"; mkdirhier "$prefix/xdvi"; mkdirhier "$prefix/tex/context/config"; } =item C Generate a skeleton of empty directories in the C tree, unless C already exists. =cut sub make_local_skeleton { my ($prefix) = @_; return if (-d $prefix); mkdirhier "$prefix/bibtex/bib/local"; mkdirhier "$prefix/bibtex/bst/local"; mkdirhier "$prefix/doc/local"; mkdirhier "$prefix/dvips/local"; mkdirhier "$prefix/fonts/source/local"; mkdirhier "$prefix/fonts/tfm/local"; mkdirhier "$prefix/fonts/type1/local"; mkdirhier "$prefix/fonts/vf/local"; mkdirhier "$prefix/metapost/local"; mkdirhier "$prefix/tex/latex/local"; mkdirhier "$prefix/tex/plain/local"; mkdirhier "$prefix/tlpkg"; mkdirhier "$prefix/web2c"; } =item C =item C =item C =item C =item C These five functions create C, C, C, C, and C respectively, in C<$dest> (which by default is below C<$TEXMFSYSVAR>). These functions merge the information present in the TLPDB C<$tlpdb> (formats, maps, hyphenations) with local configuration additions: C<$localconf>. Currently the merging is done by omitting disabled entries specified in the local file, and then appending the content of the local configuration files at the end of the file. We should also check for duplicates, maybe even error checking. =cut # # get_disabled_local_configs # returns the list of disabled formats/hyphenpatterns/maps # disabling is done by putting # #!NAME # or # %!NAME # into the respective foo-local.cnf/cfg file # sub get_disabled_local_configs { my $localconf = shift; my $cc = shift; my @disabled = (); if ($localconf && -r $localconf) { open (FOO, "<$localconf") || die "strange, -r ok but open($localconf) failed: $!"; my @tmp = ; close(FOO) || warn("close($localconf) failed: $!"); @disabled = map { if (m/^$cc!(\S+)\s*$/) { $1 } else { } } @tmp; } return @disabled; } sub create_fmtutil { my ($tlpdb,$dest) = @_; my @lines = $tlpdb->fmtutil_cnf_lines(); _create_config_files($tlpdb, "texmf-dist/web2c/fmtutil-hdr.cnf", $dest, undef, 0, '#', \@lines); } sub create_updmap { my ($tlpdb,$dest) = @_; check_for_old_updmap_cfg(); my @tlpdblines = $tlpdb->updmap_cfg_lines(); _create_config_files($tlpdb, "texmf-dist/web2c/updmap-hdr.cfg", $dest, undef, 0, '#', \@tlpdblines); } sub check_for_old_updmap_cfg { chomp( my $tmfsysconf = `kpsewhich -var-value=TEXMFSYSCONFIG` ) ; my $oldupd = "$tmfsysconf/web2c/updmap.cfg"; return unless -r $oldupd; # if no such file, good. open (OLDUPD, "<$oldupd") || die "open($oldupd) failed: $!"; my $firstline = ; close(OLDUPD); # cygwin returns undef when reading from an empty file, we have # to make sure that this is anyway initialized $firstline = "" if (!defined($firstline)); chomp ($firstline); # if ($firstline =~ m/^# Generated by (install-tl|.*\/tlmgr) on/) { # assume it was our doing, rename it. my $nn = "$oldupd.DISABLED"; if (-r $nn) { my $fh; ($fh, $nn) = tl_tmpfile( "updmap.cfg.DISABLED.XXXXXX", DIR => "$tmfsysconf/web2c"); } print "Renaming old config file from $oldupd to $nn "; if (rename($oldupd, $nn)) { if (system("mktexlsr", $tmfsysconf) != 0) { die "mktexlsr $tmfsysconf failed after updmap.cfg rename, fix fix: $!"; } print "No further action should be necessary.\n"; } else { print STDERR " Renaming of $oldupd did not succeed. This config file should not be used anymore, so please do what's necessary to eliminate it. See the documentation for updmap. "; } } else { # first line did not match # that is NOT a good idea, because updmap creates updmap.cfg in # TEXMFSYSCONFIG when called with --enable Map etc, so we should # NOT warn here # print STDERR "Apparently # $oldupd # was created by hand. This config file should not be used anymore, # so please do what's necessary to eliminate it. # See the documentation for updmap. # "; } } sub check_updmap_config_value { my ($k, $v, $f) = @_; return 0 if !defined($k); return 0 if !defined($v); if (member( $k, qw/dvipsPreferOutline dvipsDownloadBase35 pdftexDownloadBase14 dvipdfmDownloadBase14/)) { if ($v eq "true" || $v eq "false") { return 1; } else { tlwarn("Unknown setting for $k in $f: $v\n"); return 0; } } elsif ($k eq "LW35") { if (member($v, qw/URW URWkb ADOBE ADOBEkb/)) { return 1; } else { tlwarn("Unknown setting for LW35 in $f: $v\n"); return 0; } } elsif ($k eq "kanjiEmbed") { # any string is fine return 1; } else { return 0; } } sub create_language_dat { my ($tlpdb,$dest,$localconf) = @_; # no checking for disabled stuff for language.dat and .def my @lines = $tlpdb->language_dat_lines( get_disabled_local_configs($localconf, '%')); _create_config_files($tlpdb, "texmf-dist/tex/generic/config/language.us", $dest, $localconf, 0, '%', \@lines); } sub create_language_def { my ($tlpdb,$dest,$localconf) = @_; # no checking for disabled stuff for language.dat and .def my @lines = $tlpdb->language_def_lines( get_disabled_local_configs($localconf, '%')); my @postlines; push @postlines, "%%% No changes may be made beyond this point.\n"; push @postlines, "\n"; push @postlines, "\\uselanguage {USenglish} %%% This MUST be the last line of the file.\n"; _create_config_files ($tlpdb,"texmf-dist/tex/generic/config/language.us.def", $dest, $localconf, 1, '%', \@lines, @postlines); } sub create_language_lua { my ($tlpdb,$dest,$localconf) = @_; # no checking for disabled stuff for language.dat and .lua my @lines = $tlpdb->language_lua_lines( get_disabled_local_configs($localconf, '--')); my @postlines = ("}\n"); _create_config_files ($tlpdb,"texmf-dist/tex/generic/config/language.us.lua", $dest, $localconf, 0, '--', \@lines, @postlines); } sub _create_config_files { my ($tlpdb, $headfile, $dest,$localconf, $keepfirstline, $cc, $tlpdblinesref, @postlines) = @_; my $root = $tlpdb->root; my @lines = (); my $usermode = $tlpdb->setting( "usertree" ); if (-r "$root/$headfile") { open (INFILE, "<$root/$headfile") || die "open($root/$headfile) failed, but -r ok: $!"; @lines = ; close (INFILE); } elsif (!$usermode) { # we might be in user mode and then do *not* want the generation # of the configuration file to just bail out. tldie ("TLUtils::_create_config_files: giving up, unreadable: " . "$root/$headfile\n") } push @lines, @$tlpdblinesref; if (defined($localconf) && -r $localconf) { # # this should be done more intelligently, but for now only add those # lines without any duplication check ... open (FOO, "<$localconf") || die "strange, -r ok but cannot open $localconf: $!"; my @tmp = ; close (FOO); push @lines, @tmp; } if (@postlines) { push @lines, @postlines; } if ($usermode && -e $dest) { tlwarn("Updating $dest, backup copy in $dest.backup\n"); copy("-f", $dest, "$dest.backup"); } open(OUTFILE,">$dest") or die("Cannot open $dest for writing: $!"); if (!$keepfirstline) { print OUTFILE $cc; printf OUTFILE " Generated by %s on %s\n", "$0", scalar localtime; } print OUTFILE @lines; close(OUTFILE) || warn "close(>$dest) failed: $!"; } sub parse_AddHyphen_line { my $line = shift; my %ret; # default values my $default_lefthyphenmin = 2; my $default_righthyphenmin = 3; $ret{"lefthyphenmin"} = $default_lefthyphenmin; $ret{"righthyphenmin"} = $default_righthyphenmin; $ret{"synonyms"} = []; for my $p (quotewords('\s+', 0, "$line")) { my ($a, $b) = split /=/, $p; if ($a eq "name") { if (!$b) { $ret{"error"} = "AddHyphen line needs name=something"; return %ret; } $ret{"name"} = $b; next; } if ($a eq "lefthyphenmin") { $ret{"lefthyphenmin"} = ( $b ? $b : $default_lefthyphenmin ); next; } if ($a eq "righthyphenmin") { $ret{"righthyphenmin"} = ( $b ? $b : $default_righthyphenmin ); next; } if ($a eq "file") { if (!$b) { $ret{"error"} = "AddHyphen line needs file=something"; return %ret; } $ret{"file"} = $b; next; } if ($a eq "file_patterns") { $ret{"file_patterns"} = $b; next; } if ($a eq "file_exceptions") { $ret{"file_exceptions"} = $b; next; } if ($a eq "luaspecial") { $ret{"luaspecial"} = $b; next; } if ($a eq "databases") { @{$ret{"databases"}} = split /,/, $b; next; } if ($a eq "synonyms") { @{$ret{"synonyms"}} = split /,/, $b; next; } if ($a eq "comment") { $ret{"comment"} = $b; next; } # should not be reached at all $ret{"error"} = "Unknown language directive $a"; return %ret; } # this default value couldn't be set earlier if (not defined($ret{"databases"})) { if (defined $ret{"file_patterns"} or defined $ret{"file_exceptions"} or defined $ret{"luaspecial"}) { @{$ret{"databases"}} = qw(dat def lua); } else { @{$ret{"databases"}} = qw(dat def); } } return %ret; } # # return hash of items on AddFormat line LINE (which must not have the # leading "execute AddFormat"). If parse fails, hash will contain a key # "error" with a message. # sub parse_AddFormat_line { my $line = shift; my %ret; $ret{"options"} = ""; $ret{"patterns"} = "-"; $ret{"mode"} = 1; for my $p (quotewords('\s+', 0, "$line")) { my ($a, $b); if ($p =~ m/^(name|engine|mode|patterns|options|fmttriggers)=(.*)$/) { $a = $1; $b = $2; } else { $ret{"error"} = "Unknown format directive $p"; return %ret; } if ($a eq "name") { if (!$b) { $ret{"error"} = "AddFormat line needs name=something"; return %ret; } $ret{"name"} = $b; next; } if ($a eq "engine") { if (!$b) { $ret{"error"} = "AddFormat line needs engine=something"; return %ret; } $ret{"engine"} = $b; next; } if ($a eq "patterns") { $ret{"patterns"} = ( $b ? $b : "-" ); next; } if ($a eq "mode") { $ret{"mode"} = ( $b eq "disabled" ? 0 : 1 ); next; } if ($a eq "options") { $ret{"options"} = ( $b ? $b : "" ); next; } if ($a eq "fmttriggers") { my @tl = split(',',$b); $ret{"fmttriggers"} = \@tl ; next; } # should not be reached at all $ret{"error"} = "Unknown format directive $p"; return %ret; } return %ret; } =back =head2 Logging Logging and debugging messages. =over 4 =item C Internal routine to write message to both C<$out> (references to filehandle) and C<$::LOGFILE>, at level C<$level>, of concatenated items in C<@rest>. If the log file is not initialized yet, the message is saved to be logged later (unless the log file never comes into existence). =cut sub logit { my ($out, $level, @rest) = @_; _logit($out, $level, @rest) unless $::opt_quiet; _logit('file', $level, @rest); } sub _logit { my ($out, $level, @rest) = @_; if ($::opt_verbosity >= $level) { # if $out is a ref/glob to STDOUT or STDERR, print it there if (ref($out) eq "GLOB") { print $out @rest; } else { # we should log it into the logfile, but that might be not initialized # so either print it to the filehandle $::LOGFILE, or push it onto # the to be printed log lines @::LOGLINES if (defined($::LOGFILE)) { print $::LOGFILE @rest; } else { push (@::LOGLINES, join ("", @rest)); } } } } =item C Write a normal informational message, the concatenation of the argument strings. The message will be written unless C<-q> was specified. If the global C<$::machinereadable> is set (the C<--machine-readable> option to C), then output is written to stderr, else to stdout. If the log file (see L) is defined, it also writes there. It is best to use this sparingly, mainly to give feedback during lengthy operations and for final results. =cut sub info { my $str = join("", @_); my $fh = ($::machinereadable ? \*STDERR : \*STDOUT); logit($fh, 0, $str); for my $i (@::info_hook) { &{$i}($str); } } =item C Write a debugging message, the concatenation of the argument strings. The message will be omitted unless C<-v> was specified. If the log file (see L) is defined, it also writes there. This first level debugging message reports on the overall flow of work, but does not include repeated messages about processing of each package. =cut sub debug { my $str = "D:" . join("", @_); return if ($::opt_verbosity < 1); logit(\*STDERR, 1, $str); for my $i (@::debug_hook) { &{$i}($str); } } =item C Write a deep debugging message, the concatenation of the argument strings. The message will be omitted unless C<-v -v> (or higher) was specified. If the log file (see L) is defined, it also writes there. This second level debugging message reports messages about processing each package, in addition to the first level. =cut sub ddebug { my $str = "DD:" . join("", @_); return if ($::opt_verbosity < 2); logit(\*STDERR, 2, $str); for my $i (@::ddebug_hook) { &{$i}($str); } } =item C Write the deepest debugging message, the concatenation of the argument strings. The message will be omitted unless C<-v -v -v> was specified. If the log file (see L) is defined, it also writes there. In addition to the first and second levels, this third level debugging message reports messages about processing each line of any tlpdb files read, and messages about files tested or matched against tlpsrc patterns. This output is extremely voluminous, so unless you're debugging those parts of the code, it just gets in the way. =cut sub dddebug { my $str = "DDD:" . join("", @_); return if ($::opt_verbosity < 3); logit(\*STDERR, 3, $str); for my $i (@::dddebug_hook) { &{$i}($str); } } =item C Write a message to the log file (and nowhere else), the concatenation of the argument strings. The log file may not ever be defined (e.g., the C<-logfile> option isn't given), in which case the message will never be written anywhere. =cut sub log { my $savequiet = $::opt_quiet; $::opt_quiet = 0; _logit('file', -100, @_); $::opt_quiet = $savequiet; } =item C Write a warning message, the concatenation of the argument strings. This always and unconditionally writes the message to standard error; if the log file (see L) is defined, it also writes there. =cut sub tlwarn { my $savequiet = $::opt_quiet; my $str = join("", @_); $::opt_quiet = 0; logit (\*STDERR, -100, $str); $::opt_quiet = $savequiet; for my $i (@::warn_hook) { &{$i}($str); } } =item C Uses C to issue a warning for @_ preceded by a newline, then exits with exit code 1. =cut sub tldie { tlwarn("\n", @_); if ($::gui_mode) { Tk::exit(1); } else { exit(1); } } =item C Return LABEL followed by HASH elements, followed by a newline, as a single string. If HASH is a reference, it is followed (but no recursive derefencing). =item C Write the result of C to stderr. =cut sub debug_hash_str { my ($label) = shift; my (%hash) = (ref $_[0] && $_[0] =~ /.*HASH.*/) ? %{$_[0]} : @_; my $str = "$label: {"; my @items = (); for my $key (sort keys %hash) { my $val = $hash{$key}; $val = ".undef" if ! defined $val; $key =~ s/\n/\\n/g; $val =~ s/\n/\\n/g; push (@items, "$key:$val"); } $str .= join (",", @items); $str .= "}"; return "$str\n"; } sub debug_hash { warn &debug_hash_str(@_); } =item C Return call(er) stack, as a string. =cut sub backtrace { my $ret = ""; my ($line, $subr); my $stackframe = 1; # skip ourselves while ((undef,$filename,$line,$subr) = caller ($stackframe)) { # the undef is for the package, which is already included in $subr. $ret .= " -> ${filename}:${line}: ${subr}\n"; $stackframe++; } return $ret; } =item C This function handles the common logging options for TeX Live scripts. It should be called before C for any program-specific option handling. For our conventional calling sequence, see (for example) the L script. These are the options handled here: =over 4 =item B<-q> Omit normal informational messages. =item B<-v> Include debugging messages. With one C<-v>, reports overall flow; with C<-v -v> (or C<-vv>), also reports per-package processing; with C<-v -v -v> (or C<-vvv>), also reports each line read from any tlpdb files. Further repeats of C<-v>, as in C<-v -v -v -v>, are accepted but ignored. C<-vvvv> is an error. The idea behind these levels is to be able to specify C<-v> to get an overall idea of what is going on, but avoid terribly voluminous output when processing many packages, as we often are. When debugging a specific problem with a specific package, C<-vv> can help. When debugging problems with parsing tlpdb files, C<-vvv> gives that too. =item B<-logfile> I Write all messages (informational, debugging, warnings) to I, in addition to standard output or standard error. In TeX Live, only the installer sets a log file by default; none of the other standard TeX Live scripts use this feature, but you can specify it explicitly. =back See also the L, L, L, and L functions, which actually write the messages. =cut sub process_logging_options { $::opt_verbosity = 0; $::opt_quiet = 0; my $opt_logfile; my $opt_Verbosity = 0; my $opt_VERBOSITY = 0; # check all the command line options for occurrences of -q and -v; # do not report errors. my $oldconfig = Getopt::Long::Configure(qw(pass_through permute)); GetOptions("logfile=s" => \$opt_logfile, "v+" => \$::opt_verbosity, "vv" => \$opt_Verbosity, "vvv" => \$opt_VERBOSITY, "q" => \$::opt_quiet); Getopt::Long::Configure($oldconfig); # verbosity level, forcing -v -v instead of -vv is too annoying. $::opt_verbosity = 2 if $opt_Verbosity; $::opt_verbosity = 3 if $opt_VERBOSITY; # open log file if one was requested. if ($opt_logfile) { open(TLUTILS_LOGFILE, ">$opt_logfile") || die "open(>$opt_logfile) failed: $!\n"; $::LOGFILE = \*TLUTILS_LOGFILE; $::LOGFILENAME = $opt_logfile; } } =back =head2 Miscellaneous A few ideas from Fabrice Popineau's C. =over 4 =item C The C function sorts the given array and throws away multiple occurrences of elements. It returns a sorted and unified array. =cut sub sort_uniq { my (@l) = @_; my ($e, $f, @r); $f = ""; @l = sort(@l); foreach $e (@l) { if ($e ne $f) { $f = $e; push @r, $e; } } return @r; } =item C The C function pushes each element in the last argument @ITEMS to the $LIST referenced by the first argument, if it is not already in the list. =cut sub push_uniq { my ($l, @new_items) = @_; for my $e (@new_items) { # turns out this is one of the most-used functions when updating the # tlpdb, with hundreds of thousands of calls. So let's write it out # to eliminate the sub overhead. #if (! &member($e, @$l)) { if (! scalar grep($_ eq $e, @$l)) { push (@$l, $e); } } } =item C The C function returns true if the first argument is also inclued in the list of the remaining arguments. =cut sub member { my $what = shift; return scalar grep($_ eq $what, @_); } =item C Merges the keys of %from into %to. =cut sub merge_into { my ($to, $from) = @_; foreach my $k (keys %$from) { if (defined($to->{$k})) { push @{$to->{$k}}, @{$from->{$k}}; } else { $to->{$k} = [ @{$from->{$k}} ]; } } } =item C Test whether installation with TEXDIR set to $texdir should be ok, e.g., would be a creatable directory. Return 1 if ok, 0 if not. Writable or not, we will not allow installation to the root directory (Unix) or the root of a drive (Windows). We also do not allow paths containing various special characters, and print a message about this if second argument WARN is true. (We only want to do this for the regular text installer, since spewing output in a GUI program wouldn't be good; the generic message will have to do for them.) =cut sub texdir_check { my ($orig_texdir,$warn) = @_; return 0 unless defined $orig_texdir; # convert to absolute, for safer parsing. # also replaces backslashes with slashes on w32. # The return value may still contain symlinks, # but no unnecessary terminating '/'. my $texdir = tl_abs_path($orig_texdir); return 0 unless defined $texdir; # reject the root of a drive, # assuming that only the canonical form of the root ends with / return 0 if $texdir =~ m!/$!; # Unfortunately we have lots of special characters. # On Windows, backslashes are normal but will already have been changed # to slashes by tl_abs_path. And we should only check for : on Unix. my $colon = win32() ? "" : ":"; if ($texdir =~ /[,$colon;\\{}\$]/) { if ($warn) { print " !! TEXDIR value has problematic characters: $orig_texdir\n"; print " !! (such as comma, colon, semicolon, backslash, braces\n"; print " !! and dollar sign; sorry)\n"; } # although we could check each character individually and give a # specific error, it seems plausibly useful to report all the chars # that cause problems, regardless of which was there. Simpler too. return 0; } # w32: for now, reject the root of a samba share return 0 if win32() && $texdir =~ m!^//[^/]+/[^/]+$!; # if texdir already exists, make sure we can write into it. return dir_writable($texdir) if (-d $texdir); # if texdir doesn't exist, make sure we can write the parent. (my $texdirparent = $texdir) =~ s!/[^/]*$!!; #print STDERR "Checking $texdirparent".'[/]'."\n"; return dir_creatable($texdirparent) if -d dir_slash($texdirparent); # ditto for the next level up the tree (my $texdirpparent = $texdirparent) =~ s!/[^/]*$!!; #print STDERR "Checking $texdirpparent".'[/]'."\n"; return dir_creatable($texdirpparent) if -d dir_slash($texdirpparent); # doesn't look plausible. return 0; } =pod This function takes a single argument I and returns it with C<"> chars surrounding it on Unix. On Windows, the C<"> chars are only added if I contains special characters, since unconditional quoting leads to errors there. In all cases, any C<"> chars in I itself are (erroneously) eradicated. =cut sub quotify_path_with_spaces { my $p = shift; my $m = win32() ? '[+=^&();,!%\s]' : '.'; if ( $p =~ m/$m/ ) { $p =~ s/"//g; # remove any existing double quotes $p = "\"$p\""; } return($p); } =pod This function returns a "Windows-ized" version of its single argument I, i.e., replaces all forward slashes with backslashes, and adds an additional C<"> at the beginning and end if I contains any spaces. It also makes the path absolute. So if $path does not start with one (arbitrary) characer followed by C<:>, we add the output of C<`cd`>. The result is suitable for running in shell commands, but not file tests or other manipulations, since in such internal Perl contexts, the quotes would be considered part of the filename. =cut sub conv_to_w32_path { my $p = shift; # we need absolute paths, too my $pabs = tl_abs_path($p); if (not $pabs) { $pabs = $p; tlwarn ("sorry, could not determine absolute path of $p!\n". "using original path instead"); } $pabs =~ s!/!\\!g; $pabs = quotify_path_with_spaces($pabs); return($pabs); } =pod The next two functions are meant for user input/output in installer menus. They help making the windows user happy by turning slashes into backslashes before displaying a path, and our code happy by turning backslashes into forwars slashes after reading a path. They both are no-ops on Unix. =cut sub native_slashify { my ($r) = @_; $r =~ s!/!\\!g if win32(); return $r; } sub forward_slashify { my ($r) = @_; $r =~ s!\\!/!g if win32(); return $r; } =item C Set up to use persistent connections using LWP/TLDownload, that is look for a download server. Return the TLDownload object if successful, else false. =cut sub setup_persistent_downloads { if ($TeXLive::TLDownload::net_lib_avail) { ddebug("setup_persistent_downloads has net_lib_avail set\n"); if ($::tldownload_server) { if ($::tldownload_server->initcount() > $TeXLive::TLConfig::MaxLWPReinitCount) { debug("stop retrying to initialize LWP after 10 failures\n"); return 0; } else { $::tldownload_server->reinit(); } } else { $::tldownload_server = TeXLive::TLDownload->new; } if (!defined($::tldownload_server)) { ddebug("TLUtils:setup_persistent_downloads: failed to get ::tldownload_server\n"); } else { ddebug("TLUtils:setup_persistent_downloads: got ::tldownload_server\n"); } return $::tldownload_server; } return 0; } =item C Return a particular mirror given by the generic CTAN auto-redirecting default (specified in L<$TLConfig::TexLiveServerURL>) if we get a response, else the empty string. Neither C nor is honored (see L), since certain options have to be set to do the job and the program has to be C since we parse the output. =cut sub query_ctan_mirror { my $wget = $::progs{'wget'}; if (!defined ($wget)) { tlwarn("query_ctan_mirror: Programs not set up, trying wget\n"); $wget = "wget"; } # we need the verbose output, so no -q. # do not reduce retries here, but timeout still seems desirable. my $mirror = $TeXLiveServerURL; my $cmd = "$wget $mirror --timeout=$NetworkTimeout -O " . (win32() ? "nul" : "/dev/null") . " 2>&1"; # # since we are reading the output of wget to find a mirror # we have to make sure that the locale is unset my $saved_lcall; if (defined($ENV{'LC_ALL'})) { $saved_lcall = $ENV{'LC_ALL'}; } $ENV{'LC_ALL'} = "C"; # we try 3 times to get a mirror from mirror.ctan.org in case we have # bad luck with what gets returned. my $max_trial = 3; my $mhost; for (my $i = 1; $i <= $max_trial; $i++) { my @out = `$cmd`; # analyze the output for the mirror actually selected. foreach (@out) { if (m/^Location: (\S*)\s*.*$/) { (my $mhost = $1) =~ s,/*$,,; # remove trailing slashes since we add it return $mhost; } } sleep(1); } # reset LC_ALL to undefined or the previous value if (defined($saved_lcall)) { $ENV{'LC_ALL'} = $saved_lcall; } else { delete($ENV{'LC_ALL'}); } # we are still here, so three times we didn't get a mirror, give up # and return undefined return; } =item C Check if MIRROR is functional. =cut sub check_on_working_mirror { my $mirror = shift; my $wget = $::progs{'wget'}; if (!defined ($wget)) { tlwarn ("check_on_working_mirror: Programs not set up, trying wget\n"); $wget = "wget"; } $wget = quotify_path_with_spaces($wget); # # the test is currently not completely correct, because we do not # use the LWP if it is set up for it, but I am currently too lazy # to program it, # so try wget and only check for the return value # please KEEP the / after $mirror, some ftp mirrors do give back # an error if the / is missing after ../CTAN/ my $cmd = "$wget $mirror/ --timeout=$NetworkTimeout -O " . (win32() ? "nul" : "/dev/null") . " 2>" . (win32() ? "nul" : "/dev/null"); my $ret = system($cmd); # if return value is not zero it is a failure, so switch the meanings return ($ret ? 0 : 1); } =item C 1. get a mirror (retries 3 times to contact mirror.ctan.org) - if no mirror found, use one of the backbone servers - if it is an http server return it (no test is done) - if it is a ftp server, continue 2. if the ftp mirror is good, return it 3. if the ftp mirror is bad, search for http mirror (5 times) 4. if http mirror is found, return it (again, no test,) 5. if no http mirror is found, return one of the backbone servers =cut sub give_ctan_mirror_base { # only one backbone has existed for a while (2018). my @backbone = qw!http://www.ctan.org/tex-archive!; # start by selecting a mirror and test its operationality my $mirror = query_ctan_mirror(); if (!defined($mirror)) { # three times calling mirror.ctan.org did not give anything useful, # return one of the backbone servers tlwarn("cannot contact mirror.ctan.org, returning a backbone server!\n"); return $backbone[int(rand($#backbone + 1))]; } if ($mirror =~ m!^https?://!) { # if http mirror, assume good and return. return $mirror; } # we are still here, so we got a ftp mirror from mirror.ctan.org if (check_on_working_mirror($mirror)) { return $mirror; # ftp mirror is working, return. } # we are still here, so the ftp mirror failed, retry and hope for http. # theory is that if one ftp fails, probably all ftp is broken. my $max_mirror_trial = 5; for (my $try = 1; $try <= $max_mirror_trial; $try++) { my $m = query_ctan_mirror(); debug("querying mirror, got " . (defined($m) ? $m : "(nothing)") . "\n"); if (defined($m) && $m =~ m!^https?://!) { return $m; # got http this time, assume ok. } # sleep to make mirror happy, but only if we are not ready to return sleep(1) if $try < $max_mirror_trial; } # 5 times contacting the mirror service did not return a http server, # use one of the backbone servers. debug("no mirror found ... randomly selecting backbone\n"); return $backbone[int(rand($#backbone + 1))]; } sub give_ctan_mirror { return (give_ctan_mirror_base(@_) . "/$TeXLiveServerPath"); } =item C =item C C returns the lists of viable mirrors according to ctan-mirrors.pl, in a list which also contains continents, and country headers. C extracts the actual repository data from one of these entries. # KEEP THESE TWO FUNCTIONS IN SYNC!!! =cut sub create_mirror_list { our $mirrors; my @ret = (); require("installer/ctan-mirrors.pl"); my @continents = sort keys %$mirrors; for my $continent (@continents) { # first push the name of the continent push @ret, uc($continent); my @countries = sort keys %{$mirrors->{$continent}}; for my $country (@countries) { my @mirrors = sort keys %{$mirrors->{$continent}{$country}}; my $first = 1; for my $mirror (@mirrors) { my $mfull = $mirror; $mfull =~ s!/$!!; # do not append the server path part here, but add # it down there in the extract mirror entry #$mfull .= "/" . $TeXLive::TLConfig::TeXLiveServerPath; #if ($first) { my $country_str = sprintf "%-12s", $country; push @ret, " $country_str $mfull"; # $first = 0; #} else { # push @ret, " $mfull"; #} } } } return @ret; } # extract_mirror_entry is not very intelligent, it assumes that # the last "word" is the URL sub extract_mirror_entry { my $ent = shift; my @foo = split ' ', $ent; return $foo[$#foo] . "/" . $TeXLive::TLConfig::TeXLiveServerPath; } =pod =item C<< slurp_file($file) >> Reads the whole file and returns the content in a scalar. =cut sub slurp_file { my $file = shift; my $file_data = do { local $/ = undef; open my $fh, "<", $file || die "open($file) failed: $!"; <$fh>; }; return($file_data); } =pod =item C<< download_to_temp_or_file($url) >> If C<$url> is a url, tries to download the file into a temporary file. Otherwise assume that C<$url> is a local file. In both cases returns the local file. Returns the local file name if succeeded, otherwise undef. =cut sub download_to_temp_or_file { my $url = shift; my ($url_fh, $url_file); if ($url =~ m,^(https?|ftp|file)://, || $url =~ m!$SshURIRegex!) { ($url_fh, $url_file) = tl_tmpfile(); # now $url_fh filehandle is open, the file created # TLUtils::download_file will just overwrite what is there # on windows that doesn't work, so we close the fh immediately # this creates a short loophole, but much better than before anyway close($url_fh); $ret = download_file($url, $url_file); } else { $url_file = $url; $ret = 1; } if ($ret && (-r "$url_file")) { return $url_file; } return; } =item C<< compare_tlpobjs($tlpA, $tlpB) >> Compare the two passed L objects. Returns a hash: $ret{'revision'} = "revA:revB" # if revisions differ $ret{'removed'} = \[ list of files removed from A to B ] $ret{'added'} = \[ list of files added from A to B ] $ret{'fmttriggers'} = 1 if the fmttriggers have changed =cut sub compare_tlpobjs { my ($tlpA, $tlpB) = @_; my %ret; my $rA = $tlpA->revision; my $rB = $tlpB->revision; if ($rA != $rB) { $ret{'revision'} = "$rA:$rB"; } if ($tlpA->relocated) { $tlpA->replace_reloc_prefix; } if ($tlpB->relocated) { $tlpB->replace_reloc_prefix; } my @fA = $tlpA->all_files; my @fB = $tlpB->all_files; my %removed; my %added; for my $f (@fA) { $removed{$f} = 1; } for my $f (@fB) { delete($removed{$f}); $added{$f} = 1; } for my $f (@fA) { delete($added{$f}); } my @rem = sort keys %removed; my @add = sort keys %added; $ret{'removed'} = \@rem if @rem; $ret{'added'} = \@add if @add; # changed dependencies should not trigger a change without a # change in revision, so for now (until we find a reason why # we need to) we don't check. # OTOH, execute statements like # execute AddFormat name=aleph engine=aleph options=*aleph.ini fmttriggers=cm,hyphen-base,knuth-lib,plain # might change due to changes in the fmttriggers variables. # Again, name/engine/options are only defined in the package's # tlpsrc file, so changes here will trigger revision changes, # but fmttriggers are defined outside the tlpsrc and thus do # not trigger an automatic revision change. Check for that! # No need to record actual changes, just record that it has changed. my %triggersA; my %triggersB; # we sort executes after format/engine like fmtutil does, since this # should be unique for my $e ($tlpA->executes) { if ($e =~ m/AddFormat\s+(.*)\s*/) { my %r = parse_AddFormat_line("$1"); if (defined($r{"error"})) { die "$r{'error'} when comparing packages $tlpA->name execute $e"; } for my $t (@{$r{'fmttriggers'}}) { $triggersA{"$r{'name'}:$r{'engine'}:$t"} = 1; } } } for my $e ($tlpB->executes) { if ($e =~ m/AddFormat\s+(.*)\s*/) { my %r = parse_AddFormat_line("$1"); if (defined($r{"error"})) { die "$r{'error'} when comparing packages $tlpB->name execute $e"; } for my $t (@{$r{'fmttriggers'}}) { $triggersB{"$r{'name'}:$r{'engine'}:$t"} = 1; } } } for my $t (keys %triggersA) { delete($triggersA{$t}); delete($triggersB{$t}); } if (keys(%triggersA) || keys(%triggersB)) { $ret{'fmttrigger'} = 1; } return %ret; } =item C<< compare_tlpdbs($tlpdbA, $tlpdbB, @more_ignored_pkgs) >> Compare the two passed L objects, ignoring the packages C<00texlive.installer>, C<00texlive.image>, and any passed C<@more_ignore_pkgs>. Returns a hash: $ret{'removed_packages'} = \[ list of removed packages from A to B ] $ret{'added_packages'} = \[ list of added packages from A to B ] $ret{'different_packages'}->{$package} = output of compare_tlpobjs =cut sub compare_tlpdbs { my ($tlpdbA, $tlpdbB, @add_ignored_packs) = @_; my @ignored_packs = qw/00texlive.installer 00texlive.image/; push @ignored_packs, @add_ignored_packs; my @inAnotinB; my @inBnotinA; my %diffpacks; my %do_compare; my %ret; for my $p ($tlpdbA->list_packages()) { my $is_ignored = 0; for my $ign (@ignored_packs) { if (($p =~ m/^$ign$/) || ($p =~ m/^$ign\./)) { $is_ignored = 1; last; } } next if $is_ignored; my $tlpB = $tlpdbB->get_package($p); if (!defined($tlpB)) { push @inAnotinB, $p; } else { $do_compare{$p} = 1; } } $ret{'removed_packages'} = \@inAnotinB if @inAnotinB; for my $p ($tlpdbB->list_packages()) { my $is_ignored = 0; for my $ign (@ignored_packs) { if (($p =~ m/^$ign$/) || ($p =~ m/^$ign\./)) { $is_ignored = 1; last; } } next if $is_ignored; my $tlpA = $tlpdbA->get_package($p); if (!defined($tlpA)) { push @inBnotinA, $p; } else { $do_compare{$p} = 1; } } $ret{'added_packages'} = \@inBnotinA if @inBnotinA; for my $p (sort keys %do_compare) { my $tlpA = $tlpdbA->get_package($p); my $tlpB = $tlpdbB->get_package($p); my %foo = compare_tlpobjs($tlpA, $tlpB); if (keys %foo) { # some diffs were found $diffpacks{$p} = \%foo; } } $ret{'different_packages'} = \%diffpacks if (keys %diffpacks); return %ret; } sub tlnet_disabled_packages { my ($root) = @_; my $disabled_pkgs = "$root/tlpkg/dev/tlnet-disabled-packages.txt"; my @ret; if (-r $disabled_pkgs) { open (DISABLED, "<$disabled_pkgs") || die "Huu, -r but cannot open: $?"; while () { chomp; next if /^\s*#/; next if /^\s*$/; $_ =~ s/^\s*//; $_ =~ s/\s*$//; push @ret, $_; } close(DISABLED) || warn ("Cannot close tlnet-disabled-packages.txt: $?"); } return @ret; } sub report_tlpdb_differences { my $rret = shift; my %ret = %$rret; if (defined($ret{'removed_packages'})) { info ("removed packages from A to B:\n"); for my $f (@{$ret{'removed_packages'}}) { info (" $f\n"); } } if (defined($ret{'added_packages'})) { info ("added packages from A to B:\n"); for my $f (@{$ret{'added_packages'}}) { info (" $f\n"); } } if (defined($ret{'different_packages'})) { info ("different packages from A to B:\n"); for my $p (keys %{$ret{'different_packages'}}) { info (" $p\n"); for my $k (keys %{$ret{'different_packages'}->{$p}}) { if ($k eq "revision") { info(" revision differ: $ret{'different_packages'}->{$p}->{$k}\n"); } elsif ($k eq "removed" || $k eq "added") { info(" $k files:\n"); for my $f (@{$ret{'different_packages'}->{$p}->{$k}}) { info(" $f\n"); } } else { info(" unknown differ $k\n"); } } } } } sub sort_archs ($$) { my $aa = $_[0]; my $bb = $_[1]; $aa =~ s/^(.*)-(.*)$/$2-$1/; $bb =~ s/^(.*)-(.*)$/$2-$1/; $aa cmp $bb ; } # Taken from Text::ParseWords # sub quotewords { my($delim, $keep, @lines) = @_; my($line, @words, @allwords); foreach $line (@lines) { @words = parse_line($delim, $keep, $line); return() unless (@words || !length($line)); push(@allwords, @words); } return(@allwords); } sub parse_line { my($delimiter, $keep, $line) = @_; my($word, @pieces); no warnings 'uninitialized'; # we will be testing undef strings $line =~ s/\s+$//; # kill trailing whitespace while (length($line)) { $line =~ s/^(["']) # a $quote ((?:\\.|(?!\1)[^\\])*) # and $quoted text \1 # followed by the same quote | # --OR-- ^((?:\\.|[^\\"'])*?) # an $unquoted text (\Z(?!\n)|(?-x:$delimiter)|(?!^)(?=["'])) # plus EOL, delimiter, or quote //xs or return; # extended layout my($quote, $quoted, $unquoted, $delim) = ($1, $2, $3, $4); return() unless( defined($quote) || length($unquoted) || length($delim)); if ($keep) { $quoted = "$quote$quoted$quote"; } else { $unquoted =~ s/\\(.)/$1/sg; if (defined $quote) { $quoted =~ s/\\(.)/$1/sg if ($quote eq '"'); $quoted =~ s/\\([\\'])/$1/g if ( $PERL_SINGLE_QUOTE && $quote eq "'"); } } $word .= substr($line, 0, 0); # leave results tainted $word .= defined $quote ? $quoted : $unquoted; if (length($delim)) { push(@pieces, $word); push(@pieces, $delim) if ($keep eq 'delimiters'); undef $word; } if (!length($line)) { push(@pieces, $word); } } return(@pieces); } =item C Append entries to C files. Usage example: my $updLSR=&mktexupd(); $updLSR->{mustexist}(1); $updLSR->{add}(file1); $updLSR->{add}(file2); $updLSR->{add}(file3); $updLSR->{exec}(); The first line creates a new object. Only one such object should be created in a program in order to avoid duplicate entries in C files. C pushes a filename or a list of filenames to a hash encapsulated in a closure. Filenames must be specified with the full (absolute) path. Duplicate entries are ignored. C checks for each component of C<$TEXMFDBS> whether there are files in the hash which have to be appended to the corresponding C files and eventually updates the corresponding C files. Files which are in directories not stated in C<$TEXMFDBS> are silently ignored. If the flag C is set, C aborts with an error message if a file supposed to be appended to an C file doesn't exist physically on the file system. This option was added for compatibility with the C shell script. This option shouldn't be enabled in scripts, except for testing, because it degrades performance on non-cached file systems. =cut sub mktexupd { my %files; my $mustexist=0; my $hash={ "add" => sub { foreach my $file (@_) { $file =~ s|\\|/|g; $files{$file}=1; } }, "reset" => sub { %files=(); }, "mustexist" => sub { $mustexist=shift; }, "exec" => sub { # check whether files exist if ($mustexist) { foreach my $file (keys %files) { die "mktexupd: exec file does not exist: $file" if (! -f $file); } } my $delim= (&win32)? ';' : ':'; my $TEXMFDBS; chomp($TEXMFDBS=`kpsewhich --show-path="ls-R"`); my @texmfdbs=split ($delim, "$TEXMFDBS"); my %dbs; foreach my $path (keys %files) { foreach my $db (@texmfdbs) { $db=substr($db, -1) if ($db=~m|/$|); # strip leading / $db = lc($db) if win32(); $up = (win32() ? lc($path) : $path); if (substr($up, 0, length("$db/")) eq "$db/") { # we appended a / because otherwise "texmf" is recognized as a # substring of "texmf-dist". my $np = './' . substr($up, length("$db/")); my ($dir, $file); $_=$np; ($dir, $file) = m|(.*)/(.*)|; $dbs{$db}{$dir}{$file}=1; } } } foreach my $db (keys %dbs) { if (! -f "$db" || ! -w "$db/ls-R") { &mkdirhier ($db); } open LSR, ">>$db/ls-R"; foreach my $dir (keys %{$dbs{$db}}) { print LSR "\n$dir:\n"; foreach my $file (keys %{$dbs{$db}{$dir}}) { print LSR "$file\n"; } } close LSR; } } }; return $hash; } =item C =cut sub setup_sys_user_mode { my ($prg, $optsref, $TEXMFCONFIG, $TEXMFSYSCONFIG, $TEXMFVAR, $TEXMFSYSVAR) = @_; if ($optsref->{'user'} && $optsref->{'sys'}) { print STDERR "$prg [ERROR]: only one of -sys or -user can be used.\n"; exit(1); } # check if we are in *hidden* sys mode, in which case we switch # to sys mode # Nowdays we use -sys switch instead of simply overriding TEXMFVAR # and TEXMFCONFIG # This is used to warn users when they run updmap in usermode the first time. # But it might happen that this script is called via another wrapper that # sets TEXMFCONFIG and TEXMFVAR, and does not pass on the -sys option. # for this case we check whether the SYS and non-SYS variants agree, # and if, then switch to sys mode (with a warning) if (($TEXMFSYSCONFIG eq $TEXMFCONFIG) && ($TEXMFSYSVAR eq $TEXMFVAR)) { if ($optsref->{'user'}) { print STDERR "$prg [ERROR]: -user mode but path setup is -sys type, bailing out.\n"; exit(1); } if (!$optsref->{'sys'}) { print STDERR "$prg [WARNING]: hidden sys mode found, switching to sys mode.\n" if (!$optsref->{'quiet'}); $optsref->{'sys'} = 1; } } my ($texmfconfig, $texmfvar); if ($optsref->{'sys'}) { # we are running as updmap-sys, make sure that the right tree is used $texmfconfig = $TEXMFSYSCONFIG; $texmfvar = $TEXMFSYSVAR; } elsif ($optsref->{'user'}) { $texmfconfig = $TEXMFCONFIG; $texmfvar = $TEXMFVAR; } else { print STDERR "" . "$prg [ERROR]: Either -sys or -user mode is required.\n" . "$prg [ERROR]: In nearly all cases you should use $prg -sys.\n" . "$prg [ERROR]: For special cases see https://tug.org/texlive/scripts-sys-user.html\n" ; exit(1); } return ($texmfconfig, $texmfvar); } =item C Prepend the location of the TeX Live binaries to the PATH environment variable. This is used by (e.g.) C. The location is found by calling C on C. We use kpsewhich because it is known to be a true binary executable; C<$0> could be a symlink into (say) C, which is not a useful directory for PATH. =cut sub prepend_own_path { my $bindir = dirname(Cwd::abs_path(which('kpsewhich'))); if (win32()) { $bindir =~ s!\\!/!g; $ENV{'PATH'} = "$bindir;$ENV{PATH}"; } else { $ENV{'PATH'} = "$bindir:$ENV{PATH}"; } } =item C Return hash of tags to urls for space-separated list of repositories passed in C<$r>. If passed undef or empty string, die. =cut sub repository_to_array { my $r = shift; my %r; if (!$r) { # either empty string or undef was passed # before 20181023 we die here, now we return # an empty array return %r; } #die "internal error, repository_to_array passed nothing (caller=" # . caller . ")" if (!$r); my @repos = split (' ', $r); if ($#repos == 0) { # only one repo, this is the main one! $r{'main'} = $repos[0]; return %r; } for my $rr (@repos) { my $tag; my $url; # decode spaces and % in reverse order $rr =~ s/%20/ /g; $rr =~ s/%25/%/g; $tag = $url = $rr; if ($rr =~ m/^([^#]+)#(.*)$/) { $tag = $2; $url = $1; } $r{$tag} = $url; } return %r; } =back =head2 JSON =over 4 =item C Returns the JSON representation of the object C<$ref> is pointing at. This tries to load the C Perl module, and uses it if available, otherwise falls back to module internal conversion. The used backend can be selected by setting the environment variable C to either C or C (all other values are ignored). If C is requested and the C module cannot be loaded the program terminates. =cut my $TLTrueValue = 1; my $TLFalseValue = 0; my $TLTrue = \$TLTrueValue; my $TLFalse = \$TLFalseValue; bless $TLTrue, 'TLBOOLEAN'; bless $TLFalse, 'TLBOOLEAN'; our $jsonmode = ""; =pod =item C =item C These two crazy functions must be used to get proper JSON C and C in the output independent of the backend used. =cut sub True { ensure_json_available(); if ($jsonmode eq "json") { return($JSON::true); } else { return($TLTrue); } } sub False { ensure_json_available(); if ($jsonmode eq "json") { return($JSON::false); } else { return($TLFalse); } } sub ensure_json_available { return if ($jsonmode); # check the environment for mode to use: # $ENV{'TL_JSONMODE'} = texlive | json my $envdefined = 0; if ($ENV{'TL_JSONMODE'}) { $envdefined = 1; if ($ENV{'TL_JSONMODE'} eq "texlive") { $jsonmode = "texlive"; debug("texlive json module used!\n"); return; } elsif ($ENV{'TL_JSONMODE'} eq "json") { # nothing to do } else { tlwarn("Unsupported mode \'$ENV{TL_JSONMODE}\' set in TL_JSONMODE, ignoring it!"); $envdefined = 0; } } return if ($jsonmode); # was set to texlive eval { require JSON; }; if ($@) { # that didn't work out, use home-grown json if ($envdefined) { # environment asks for JSON but cannot be loaded, die! tldie("envvar TL_JSONMODE request JSON module but cannot be loaded!\n"); } $jsonmode = "texlive"; debug("texlive json module used!\n"); } else { $jsonmode = "json"; my $json = JSON->new; debug("JSON " . $json->backend . " used!\n"); } } sub encode_json { my $val = shift; ensure_json_available(); if ($jsonmode eq "json") { my $utf8_encoded_json_text = JSON::encode_json($val); return $utf8_encoded_json_text; } else { my $type = ref($val); if ($type eq "") { tldie("encode_json: accept only refs: $val"); } elsif ($type eq 'SCALAR') { return(scalar_to_json($$val)); } elsif ($type eq 'ARRAY') { return(array_to_json($val)); } elsif ($type eq 'HASH') { return(hash_to_json($val)); } elsif ($type eq 'REF') { return(encode_json($$val)); } elsif (Scalar::Util::blessed($val)) { if ($type eq "TLBOOLEAN") { return($$val ? "true" : "false"); } else { tldie("encode_json: unsupported blessed object"); } } else { tldie("encode_json: unsupported format $type"); } } } sub scalar_to_json { sub looks_like_numeric { # code from JSON/backportPP.pm my $value = shift; no warnings 'numeric'; # detect numbers # string & "" -> "" # number & "" -> 0 (with warning) # nan and inf can detect as numbers, so check with * 0 return unless length((my $dummy = "") & $value); return unless 0 + $value eq $value; return 1 if $value * 0 == 0; return -1; # inf/nan } my $val = shift; if (defined($val)) { if (looks_like_numeric($val)) { return("$val"); } else { return(string_to_json($val)); } } else { return("null"); } } sub string_to_json { my $val = shift; my %esc = ( "\n" => '\n', "\r" => '\r', "\t" => '\t', "\f" => '\f', "\b" => '\b', "\"" => '\"', "\\" => '\\\\', "\'" => '\\\'', ); $val =~ s/([\x22\x5c\n\r\t\f\b])/$esc{$1}/g; return("\"$val\""); } sub hash_to_json { my $hr = shift; my @retvals; for my $k (keys(%$hr)) { my $val = $hr->{$k}; push @retvals, "\"$k\":" . encode_json(\$val); } my $ret = "{" . join(",", @retvals) . "}"; return($ret); } sub array_to_json { my $hr = shift; my $ret = "[" . join(",", map { encode_json(\$_) } @$hr) . "]"; return($ret); } =pod =back =cut 1; __END__ =head1 SEE ALSO The other modules in C (L and the rest), and the scripts in C (especially C), the documentation in C, etc. =head1 AUTHORS AND COPYRIGHT This script and its documentation were written for the TeX Live distribution (L) and both are licensed under the GNU General Public License Version 2 or later. =cut ### Local Variables: ### perl-indent-level: 2 ### tab-width: 2 ### indent-tabs-mode: nil ### End: # vim:set tabstop=2 expandtab: #