# $Id$ # TeXLive::TLPDB.pm - module for using tlpdb files # Copyright 2007-2013 Norbert Preining # This file is licensed under the GNU General Public License version 2 # or any later version. package TeXLive::TLPDB; my $svnrev = '$Revision$'; my $_modulerevision; if ($svnrev =~ m/: ([0-9]+) /) { $_modulerevision = $1; } else { $_modulerevision = "unknown"; } sub module_revision { return $_modulerevision; } =pod =head1 NAME C -- A database of TeX Live Packages =head1 SYNOPSIS use TeXLive::TLPDB; TeXLive::TLPDB->new (); TeXLive::TLPDB->new (root => "/path/to/texlive/installation/root"); $tlpdb->root("/path/to/root/of/texlive/installation"); $tlpdb->copy; $tlpdb->from_file($filename); $tlpdb->writeout; $tlpdb->writeout(FILEHANDLE); $tlpdb->save; $tlpdb->media; $tlpdb->available_architectures(); $tlpdb->add_tlpcontainer($pkg, $ziploc [, $archrefs [, $dest ]] ); $tlpdb->add_tlpobj($tlpobj); $tlpdb->needed_by($pkg); $tlpdb->remove_tlpobj($pkg); $tlpdb->get_package("packagename"); $tlpdb->list_packages ( [$tag] ); $tlpdb->expand_dependencies(["-only-arch",] $totlpdb, @list); $tlpdb->expand_dependencies(["-no-collections",] $totlpdb, @list); $tlpdb->find_file("filename"); $tlpdb->collections; $tlpdb->schemes; $tlpdb->updmap_cfg_lines; $tlpdb->fmtutil_cnf_lines; $tlpdb->language_dat_lines; $tlpdb->language_def_lines; $tlpdb->language_lua_lines; $tlpdb->package_revision("packagename"); $tlpdb->location; $tlpdb->platform; $tlpdb->config_src_container; $tlpdb->config_doc_container; $tlpdb->config_container_format; $tlpdb->config_release; $tlpdb->config_minrelease; $tlpdb->config_revision; $tlpdb->options; $tlpdb->option($key, [$value]); $tlpdb->reset_options(); $tlpdb->add_default_options(); $tlpdb->settings; $tlpdb->setting($key, [$value]); $tlpdb->setting([-clear], $key, [$value]); $tlpdb->sizes_of_packages($opt_src, $opt_doc, $ref_arch_list [, @packs ]); $tlpdb->install_package($pkg, $dest_tlpdb); $tlpdb->remove_package($pkg, %options); $tlpdb->install_package_files($file [, $file ]); TeXLive::TLPDB->listdir([$dir]); $tlpdb->generate_listfiles([$destdir]); $tlpdb->make_virtual; $tlpdb->is_virtual; $tlpdb->virtual_add_tlpdb($tlpdb, $tag); $tlpdb->virtual_remove_tlpdb($tag); $tlpdb->virtual_get_tlpdb($tag); $tlpdb->virtual_get_package($pkg, $tag); $tlpdb->candidates($pkg); $tlpdb->virtual_candidate($pkg); $tlpdb->virtual_pinning( [ $pin_file_TLConfFile ] ); =head1 DESCRIPTION =cut use TeXLive::TLConfig qw($CategoriesRegexp $DefaultCategory $InfraLocation $DatabaseName $MetaCategoriesRegexp $Archive %TLPDBOptions %TLPDBSettings $RelocPrefix $RelocTree); use TeXLive::TLUtils qw(dirname mkdirhier member win32 info log debug ddebug tlwarn basename download_file merge_into tldie); use TeXLive::TLPOBJ; use TeXLive::TLWinGoo; use File::Temp qw/tempfile/; use Cwd 'abs_path'; my $_listdir; =pod =over 4 =item C<< TeXLive::TLPDB->new >> =item C<< TeXLive::TLPDB->new( [root => "$path"] ) >> C<< TeXLive::TLPDB->new >> creates a new C object. If the argument C is given it will be initialized from the respective location starting at $path. If C<$path> begins with C or C, the program C is used to download the file. The C<$path> can also start with C in which case it is treated as a file on the filesystem in the usual way. Returns an object of type C, or undef if the root was given but no package could be read from that location. =cut sub new { my $class = shift; my %params = @_; my $self = { root => $params{'root'}, tlps => $params{'tlps'} }; $_listdir = $params{'listdir'} if defined($params{'listdir'}); bless $self, $class; if (defined($params{'tlpdbfile'})) { my $nr_packages_read = $self->from_file($params{'tlpdbfile'}, '-from-file'); if ($nr_packages_read == 0) { # that is bad, we didn't read anything, so return undef. return undef; } return $self; } if (defined($self->{'root'})) { my $nr_packages_read = $self->from_file("$self->{'root'}/$InfraLocation/$DatabaseName"); if ($nr_packages_read == 0) { # that is bad, we didn't read anything, so return undef. return undef; } } return $self; } sub copy { my $self = shift; my $bla = {}; %$bla = %$self; bless $bla, "TeXLive::TLPDB"; return $bla; } =pod =item C<< $tlpdb->add_tlpobj($tlpobj) >> The C adds an object of the type TLPOBJ to the TLPDB. =cut sub add_tlpobj { my ($self,$tlp) = @_; if ($self->is_virtual) { tlwarn("cannot add tlpobj to a virtual tlpdb\n"); return 0; } $self->{'tlps'}{$tlp->name} = $tlp; } =pod =item C<< $tlpdb->needed_by($pkg) >> Returns an array of package names depending on $pkg. =cut sub needed_by { my ($self,$pkg) = @_; my @ret; for my $p ($self->list_packages) { my $tlp = $self->get_package($p); DEPENDS: for my $d ($tlp->depends) { # exact match if ($d eq $pkg) { push @ret, $p; last DEPENDS; # of the for loop on all depends } # if ($d =~ m/^(.*)\.ARCH$/) { my $parent = $1; for my $a ($self->available_architectures) { if ($pkg eq "$parent.$a") { push @ret, $p; last DEPENDS; } } } } } return @ret; } =pod =item C<< $tlpdb->remove_tlpobj($pkg) >> Remove the package named C<$pkg> from the tlpdb. Gives a warning if the package is not present =cut sub remove_tlpobj { my ($self,$pkg) = @_; if ($self->is_virtual) { tlwarn("cannot remove tlpobj from a virtual tlpdb\n"); return 0; } if (defined($self->{'tlps'}{$pkg})) { delete $self->{'tlps'}{$pkg}; } else { tlwarn("TLPDB: package to be removed not found: $pkg\n"); } } =pod =item C<< $tlpdb->from_file($filename) >> The C function initializes the C if the root was not given at generation time. See L for more information. It returns the actual number of packages (TLPOBJs) read from C<$filename>. =cut sub from_file { my ($self, $path, $arg) = @_; if ($self->is_virtual) { tlwarn("cannot initialize from file a virtual tlpdb\n"); return 0; } if (@_ < 2) { die "$0: from_file needs filename for initialization"; } my $root_from_path = dirname(dirname($path)); if (defined($self->{'root'})) { if ($self->{'root'} ne $root_from_path) { # only warn if we are not given $arg = "-from-file" if (!defined($arg) || ($arg ne "-from-file")) { tlwarn("root=$self->{'root'}, root_from_path=$root_from_path\n"); tlwarn("Initialization from different location as originally given.\nHope you are sure!\n"); } } } else { $self->root($root_from_path); } my $retfh; my $tlpdbfile; # do media detection my $rootpath = $self->root; if ($rootpath =~ m,http://|ftp://,) { $media = 'NET'; } else { if ($rootpath =~ m,file://*(.*)$,) { $rootpath = "/$1"; } if (-d "$rootpath/texmf/web2c") { $media = 'local_uncompressed'; } elsif (-d "$rootpath/$Archive") { $media = 'local_compressed'; } else { # we cannot find the right type, return undefined, that should # make people notice return 0; } } $self->{'media'} = $media; # # actually load the TLPDB if ($path =~ m;^((http|ftp)://|file:\/\/*);) { debug("TLPDB.pm: trying to initialize from $path\n"); # if we have xzdec available we try the xz file if (defined($::progs{'xzdec'})) { # we first try the xz compressed file # # we have to create a temp file to download to my ($xzfh, $xzfile) = tempfile(); # now $xzfh filehandle is open, the file created # TLUtils::download_file will just overwrite what is there # on windows that doesn't work, so we close the fh immediately # this creates a short loophole, but much better than before anyway close($xzfh); my $xzfile_quote = $xzfile; # this is a variable of the whole sub as we have to remove the file # before returning my $tlpdbfh; ($tlpdbfh, $tlpdbfile) = tempfile(); # same as above close($tlpdbfh); my $tlpdbfile_quote = $tlpdbfile; if (win32()) { $xzfile =~ s!/!\\!g; $tlpdbfile =~ s!/!\\!g; } $xzfile_quote = "\"$xzfile\""; $tlpdbfile_quote = "\"$tlpdbfile\""; my $xzdec = TeXLive::TLUtils::quotify_path_with_spaces($::progs{'xzdec'}); debug("trying to download $path.xz to $xzfile\n"); my $ret = TeXLive::TLUtils::download_file("$path.xz", "$xzfile"); # better to check both, the return value AND the existence of the file if ($ret && (-r "$xzfile")) { # ok, let the fun begin debug("un-xzing $xzfile to $tlpdbfile\n"); # xzdec *hopefully* returns 0 on success and anything else on failure # we don't have to negate since not zero means error in the shell # and thus in perl true if (system("$xzdec <$xzfile_quote >$tlpdbfile_quote")) { debug("un-xzing $xzfile failed, tryin gplain file\n"); # to be sure we unlink the xz file and the tlpdbfile unlink($xzfile); unlink($tlpdbfile); } else { unlink($xzfile); open($retfh, "<$tlpdbfile") || die "$0: open($tlpdbfile) failed: $!"; debug("found the uncompressed xz file\n"); } } } else { debug("no xzdec defined, not trying tlpdb.xz ...\n"); } if (!defined($retfh)) { debug("TLPDB: downloading $path.xz didn't succeed, try $path\n"); # xz did not succeed, so try the normal file $retfh = TeXLive::TLUtils::download_file($path, "|"); if (!$retfh) { die "open tlpdb($path) failed: $!"; } } } else { open(TMP, "<$path") || die "$0: open($path) failed: $!"; $retfh = \*TMP; } my $found = 0; my $ret = 0; do { my $tlp = TeXLive::TLPOBJ->new; $ret = $tlp->from_fh($retfh,1); if ($ret) { $self->add_tlpobj($tlp); $found++; } } until (!$ret); if (! $found) { debug("$0: Could not load packages from\n"); debug(" $path\n"); } # remove the un-xz-ed tlpdb file from temp dir # THAT IS RACY!!! we should fix that in some better way with tempfile close($retfh); unlink($tlpdbfile) if $tlpdbfile; return($found); } =pod =item C<< $tlpdb->writeout >> =item C<< $tlpdb->writeout(FILEHANDLE) >> The C function writes the database to C, or the file handle given as argument. =cut sub writeout { my $self = shift; if ($self->is_virtual) { tlwarn("cannot write out a virtual tlpdb\n"); return 0; } my $fd = (@_ ? $_[0] : STDOUT); foreach (sort keys %{$self->{'tlps'}}) { ddebug("writeout: tlpname=$_ ", $self->{'tlps'}{$_}->name, "\n"); $self->{'tlps'}{$_}->writeout($fd); print $fd "\n"; } } =pod =item C<< $tlpdb->save >> The C functions saves the C to the file which has been set as location. If the location is undefined, die. =cut sub save { my $self = shift; if ($self->is_virtual) { tlwarn("cannot save a virtual tlpdb\n"); return 0; } my $path = $self->location; mkdirhier(dirname($path)); my $tmppath = "$path.tmp"; open(FOO, ">$tmppath") || die "$0: open(>$tmppath) failed: $!"; $self->writeout(\*FOO); close(FOO); # if we managed that one, we move it over die ("rename $tmppath to $path failed: $!") unless rename($tmppath, $path); } =pod =item C<< $tlpdb->media >> Returns the media code the respective installation resides on. =cut sub media { my $self = shift ; if ($self->is_virtual) { return "virtual"; } return $self->{'media'}; } =pod =item C<< $tlpdb->available_architectures >> The C functions returns the list of available architectures as set in the options section (i.e., using setting("available_architectures")) =cut sub available_architectures { my $self = shift; my @archs; if ($self->is_virtual) { for my $k (keys %{$self->{'tlpdbs'}}) { TeXLive::TLUtils::push_uniq \@archs, $self->{'tlpdbs'}{$k}->available_architectures; } return sort @archs; } else { return $self->_available_architectures; } } sub _available_architectures { my $self = shift; my @archs = $self->setting("available_architectures"); if (! @archs) { # fall back to the old method checking tex\.* my @packs = $self->list_packages; map { s/^tex\.// ; push @archs, $_ ; } grep(/^tex\.(.*)$/, @packs); } return @archs; } =pod =item C<< $tlpdb->add_tlpcontainer($pkg, $ziploc [, $archrefs [, $dest ]] ) >> Installs the package C<$pkg> from the container files in C<$ziploc>. If C<$archrefs> is given then it must be a reference to a list of architectures to be installed. If the normal (arch=all) package is architecture dependent then all arch packages in this list are installed. If C<$dest> is given then the files are installed into it, otherwise into the location of the TLPDB. Note that this procedure does NOT check for dependencies. So if your package adds new dependencies they are not necessarily fulfilled. =cut sub add_tlpcontainer { my ($self, $package, $ziplocation, $archrefs, $dest) = @_; if ($self->is_virtual) { tlwarn("cannot add tlp container to a virtual tlpdb\n"); return 0; } my @archs; if (defined($archrefs)) { @archs = @$archrefs; } my $cwd = getcwd(); if ($ziplocation !~ m,^/,) { $ziplocation = "$cwd/$ziplocation"; } my $tlpobj = $self->_add_tlpcontainer($package, $ziplocation, "all", $dest); if ($tlpobj->is_arch_dependent) { foreach (@$archrefs) { $self->_add_tlpcontainer($package, $ziplocation, $_, $dest); } } } sub _add_tlpcontainer { my ($self, $package, $ziplocation, $arch, $dest) = @_; my $unpackprog; my $args; # WARNING: If you change the location of the texlive.tlpdb this # has to be changed, too!! if (not(defined($dest))) { $dest = $self->{'root'}; } my $container = "$ziplocation/$package"; if ($arch ne "all") { $container .= ".$arch"; } if (-r "$container.zip") { $container .= ".zip"; $unpackprog="unzip"; $args="-o -qq $container -d $dest"; } elsif (-r "$container.xz") { $container .= ".xz"; $unpackprog="NO_IDEA_HOW_TO_UNPACK_LZMA"; $args="NO IDEA WHAT ARGS IT NEEDS"; die "$0: xz checked for but not implemented, maybe update TLPDB.pm"; } else { die "$0: No package $container (.zip or .xz) in $ziplocation"; } tlwarn("Huuu, this needs testing and error checking!\n"); tlwarn("Should we use -a -- adapt line endings etc?\n"); `$unpackprog $args`; # we only create/add tlpobj for arch eq "all" if ($arch eq "all") { my $tlpobj = new TeXLive::TLPOBJ; $tlpobj->from_file("$dest/$TeXLive::TLConfig::InfraLocation/tlpobj/$package.tlpobj"); $self->add_tlpobj($tlpobj); return $tlpobj; } } =pod =item C<< $tlpdb->get_package("pkgname") >> The C function returns a reference to the C object corresponding to the I, or undef. =cut sub get_package { my ($self,$pkg,$tag) = @_; if ($self->is_virtual) { if (defined($tag)) { if (defined($self->{'packages'}{$pkg}{'tags'}{$tag})) { return $self->{'packages'}{$pkg}{'tags'}{$tag}{'tlp'}; } else { debug("TLPDB::get_package: package $pkg not found in repository $tag\n"); return; } } else { $tag = $self->{'packages'}{$pkg}{'target'}; if (defined($tag)) { return $self->{'packages'}{$pkg}{'tags'}{$tag}{'tlp'}; } else { return; } } } else { return $self->_get_package($pkg); } } sub _get_package { my ($self,$pkg) = @_; if (defined($self->{'tlps'}{$pkg})) { my $ret = $self->{'tlps'}{$pkg}; return $self->{'tlps'}{$pkg}; } else { return undef; } } =pod =item C<< $tlpdb->media_of_package($pkg [, $tag]); returns the media type of the package. In the virtual case a tag can be given and the media of that repository is used, otherwise the media of the virtual candidate is given. =cut sub media_of_package { my ($self, $pkg, $tag) = @_; if ($self->is_virtual) { if (defined($tag)) { if (defined($self->{'tlpdbs'}{$tag})) { return $self->{'tlpdbs'}{$tag}->media; } else { tlwarn ("tag $tag is not known.\n"); return; } } else { my (undef,undef,undef,$maxtlpdb) = $self->virtual_candidate($pkg); return $maxtlpdb->media; } } else { return $self->media; } } =pod =item C<< $tlpdb->list_packages >> The C function returns the list of all included packages. By default, for virtual tlpdbs only packages that are installable are listed. That means, packages that are only in subsidiary repositories but are not specifically pinned to it cannot be installed and are thus not listed. Adding "-all" argument lists also these packages. Finally, if there is another argument, the tlpdb must be virtual, and the argument must specify a tag/name of a sub-tlpdb. In this case all packages (without exceptions) from this repository are returned. =cut sub list_packages { my $self = shift; my $arg = shift; my $tag; my $showall = 0; if (defined($arg)) { if ($arg eq "-all") { $showall = 1; } else { $tag = $arg; } } if ($self->is_virtual) { if ($showall) { return (sort keys %{$self->{'packages'}}); } if ($tag) { if (defined($self->{'tlpdbs'}{$tag})) { return $self->{'tlpdbs'}{$tag}->list_packages; } else { tlwarn("TLPDB:list_packages: tag not defined: $tag\n"); return 0; } } # we have to be careful here: If a package # is only present in a subsidiary repository # and the package is *not* explicitely # pinned to it, it will not be installable. # This is what we want. But in this case # we don't want it to be listed by default. # my @pps; for my $p (keys %{$self->{'packages'}}) { push @pps, $p if (defined($self->{'packages'}{$p}{'target'})); } return (sort @pps); } else { return $self->_list_packages; } } sub _list_packages { my $self = shift; return (sort keys %{$self->{'tlps'}}); } =pod =item C<< $tlpdb->expand_dependencies(["control",] $tlpdb, ($pkgs)) >> If the first argument is the string C<"-only-arch">, expands only dependencies of the form .ARCH. If the first argument is C<"-no-collections">, then dependencies between "same-level" packages (scheme onto scheme, collection onto collection, package onto package) are ignored. The next (or first) argument is the target TLPDB, then a list of packages. In the virtual case, if a package name is tagged with C<@repository-tag> then all the dependencies will still be expanded between all included databases. Only in case of .ARCH dependencies the repository-tag is sticky. We return the closure of the package list with respect to the depends operator. (Sorry, that was for mathematicians.) =cut sub expand_dependencies { my $self = shift; my $only_arch = 0; my $no_collections = 0; my $first = shift; my $totlpdb; if ($first eq "-only-arch") { $only_arch = 1; $totlpdb = shift; } elsif ($first eq "-no-collections") { $no_collections = 1; $totlpdb = shift; } else { $totlpdb = $first; } my %install = (); my @archs = $totlpdb->available_architectures; for my $p (@_) { my ($pp, $aa) = split('@', $p); $install{$pp} = (defined($aa) ? $aa : 0);; } my $changed = 1; while ($changed) { $changed = 0; my @pre_select = keys %install; ddebug("pre_select = @pre_select\n"); for my $p (@pre_select) { next if ($p =~ m/^00texlive/); my $pkg = $self->get_package($p, ($install{$p}?$install{$p}:undef)); if (!defined($pkg)) { debug("W: $p is mentioned somewhere but not available, disabling\n"); $install{$p} = 0; next; } for my $p_dep ($pkg->depends) { ddebug("checking $p_dep in $p\n"); my $tlpdd = $self->get_package($p_dep); if (defined($tlpdd)) { # before we ignored all deps of schemes and colls if -no-collections # was given, but this prohibited auto-install of new collections # even if the scheme is updated. # Now we supress only "same-level dependencies", so scheme -> scheme # and collections -> collections and package -> package # hoping that this works out better # if ($tlpdd->category =~ m/$MetaCategoriesRegexp/) { if ($tlpdd->category eq $pkg->category) { # we ignore same-level dependencies if "-no-collections" is given ddebug("expand_deps: skipping $p_dep in $p due to -no-collections\n"); next if $no_collections; } } if ($p_dep =~ m/^(.*)\.ARCH$/) { my $foo = "$1"; foreach $a (@archs) { # install .ARCH packages from the same sub repository as the # main packages $install{"$foo.$a"} = $install{$foo} if defined($self->get_package("$foo.$a")); } } elsif ($p_dep =~ m/^(.*)\.win32$/) { # a win32 package should *only* be installed if we are installing # the win32 arch if (grep(/^win32$/,@archs)) { $install{$p_dep} = 0; } } else { $install{$p_dep} = 0 unless $only_arch; } } } # check for newly selected packages my @post_select = keys %install; ddebug("post_select = @post_select\n"); if ($#pre_select != $#post_select) { $changed = 1; } } # create return list return map { $install{$_} eq "0"?$_:"$_\@" . $install{$_} } keys %install; #return(keys %install); } =pod =item C<< $tlpdb->find_file("filename") >> The C returns a list of packages:filename containing a file named C. =cut # TODO adapt for searching in *all* tags ??? sub find_file { my ($self,$fn) = @_; my @ret; foreach my $pkg ($self->list_packages) { my @foo = $self->get_package($pkg)->contains_file($fn); foreach my $f ($self->get_package($pkg)->contains_file($fn)) { push @ret, "$pkg:$f"; } } return(@ret); } =pod =item C<< $tlpdb->collections >> The C function returns the list of all collections. =cut sub collections { my $self = shift; my @ret; foreach my $p ($self->list_packages) { if ($self->get_package($p)->category eq "Collection") { push @ret, $p; } } return @ret; } =pod =item C<< $tlpdb->schemes >> The C function returns the list of all schemes. =cut sub schemes { my $self = shift; my @ret; foreach my $p ($self->list_packages) { if ($self->get_package($p)->category eq "Scheme") { push @ret, $p; } } return @ret; } =pod =item C<< $tlpdb->package_revision("packagename") >> The C function returns the revision number of the package named in the first argument. =cut sub package_revision { my ($self,$pkg) = @_; my $tlp = $self->get_package($pkg); if (defined($tlp)) { return $tlp->revision; } else { return; } } =pod =item C<< $tlpdb->generate_packagelist >> The C prints TeX Live package names in the object database, together with their revisions, to the file handle given in the first (optional) argument, or C by default. It also outputs all available architectures as packages with revision number -1. =cut sub generate_packagelist { my $self = shift; my $fd = (@_ ? $_[0] : STDOUT); foreach (sort $self->list_packages) { print $fd $self->get_package($_)->name, " ", $self->get_package($_)->revision, "\n"; } foreach ($self->available_architectures) { print $fd "$_ -1\n"; } } =pod =item C<< $tlpdb->generate_listfiles >> =item C<< $tlpdb->generate_listfiles($destdir) >> The C generates the list files for the old installers. This function will probably go away. =cut sub generate_listfiles { my ($self,$destdir) = @_; if (not(defined($destdir))) { $destdir = TeXLive::TLPDB->listdir; } foreach (sort $self->list_package) { $tlp = $self->get_package($_); $self->_generate_listfile($tlp, $destdir); } } sub _generate_listfile { my ($self,$tlp,$destdir) = @_; my $listname = $tlp->name; my @files = $tlp->all_files; @files = TeXLive::TLUtils::sort_uniq(@files); &mkpath("$destdir") if (! -d "$destdir"); my (@lop, @lot); foreach my $d ($tlp->depends) { my $subtlp = $self->get_package($d); if (defined($subtlp)) { if ($subtlp->is_meta_package) { push @lot, $d; } else { push @lop, $d; } } else { # speudo dependencies on $Package.ARCH can be ignored if ($d !~ m/\.ARCH$/) { tlwarn("TLPDB: package $tlp->name depends on $d, but this does not exist\n"); } } } open(TMP, ">$destdir/$listname") || die "$0: open(>$destdir/$listname) failed: $!"; # title and size information for collections and schemes in the # first two lines, marked with * if ($tlp->category eq "Collection") { print TMP "*Title: ", $tlp->shortdesc, "\n"; # collections references Packages, we have to collect the sizes of # all the Package-tlps included # What is unclear for me is HOW the size is computed for bin-* # packages. The collection-basic contains quite a lot of # bin-files, but the sizes for the different archs differ. # I guess we have to take the maximum? my $s = 0; foreach my $p (@lop) { my $subtlp = $self->get_package($p); if (!defined($subtlp)) { tlwarn("TLPDB: $listname references $p, but it is not in tlpdb\n"); } $s += $subtlp->total_size; } # in case the collection itself ships files ... $s += $tlp->runsize + $tlp->srcsize + $tlp->docsize; print TMP "*Size: $s\n"; } elsif ($tlp->category eq "Scheme") { print TMP "*Title: ", $tlp->shortdesc, "\n"; my $s = 0; # schemes size includes ONLY those packages which are directly # included and direclty included files, not the size of the # included collections. But if a package is included in one of # the called for collections AND listed directly, we don't want # to count its size two times my (@inccol,@incpkg,@collpkg); # first we add all the packages tlps that are directly included @incpkg = @lop; # now we select all collections, and for all collections we # again select all non-meta-packages foreach my $c (@lot) { my $coll = $self->get_package($c); foreach my $d ($coll->depends) { my $subtlp = $self->get_package($d); if (defined($subtlp)) { if (!($subtlp->is_meta_package)) { TeXLive::TLUtils::push_uniq(\@collpkg,$d); } } else { tlwarn("TLPDB: collection $coll->name depends on $d, but this does not exist\n"); } } } # finally go through all packages and add the ->total_size foreach my $p (@incpkg) { if (!TeXLive::TLUtils::member($p,@collpkg)) { $s += $self->get_package($p)->total_size; } } $s += $tlp->runsize + $tlp->srcsize + $tlp->docsize; print TMP "*Size: $s\n"; } # dependencies and inclusion of packages foreach my $t (@lot) { # strange, schemes mark included collections via -, while collections # themself mark deps on other collections with +. collection are # never referenced in Packages if ($listname =~ m/^scheme/) { print TMP "-"; } else { print TMP "+"; } print TMP "$t\n"; } foreach my $t (@lop) { print TMP "+$t\n"; } # included files foreach my $f (@files) { print TMP "$f\n"; } # also print the listfile itself print TMP "$destdir/$listname\n"; # execute statements foreach my $e ($tlp->executes) { print TMP "!$e\n"; } # finish close(TMP); } =pod =item C<< $tlpdb->root([ "/path/to/installation" ]) >> The function C allows to read and set the root of the installation. =cut sub root { my $self = shift; if ($self->is_virtual) { tlwarn("cannot set/edit root of a virtual tlpdb\n"); return 0; } if (@_) { $self->{'root'} = shift } return $self->{'root'}; } =pod =item C<< $tlpdb->location >> Return the location of the actual C file used. This is a read-only function; you cannot change the root of the TLPDB using this function. See C<00texlive.installation.tlpsrc> for a description of the special value C<__MASTER>. =cut sub location { my $self = shift; if ($self->is_virtual) { tlwarn("cannot get location of a virtual tlpdb\n"); return 0; } return "$self->{'root'}/$InfraLocation/$DatabaseName"; } =pod =item C<< $tlpdb->platform >> returns the platform of this installation. =cut # deduce the platform of the referenced media as follows: # - if the $tlpdb->setting("platform") is there it overrides the detected # setting # - if it is not there call TLUtils::platform() sub platform { # try to deduce the platform my $self = shift; my $ret = $self->setting("platform"); return $ret if defined $ret; # the platform setting wasn't found in the tlpdb, try TLUtils::platform return TeXLive::TLUtils::platform(); } =pod =item C<< $tlpdb->listdir >> The function C allows to read and set the packages variable specifiying where generated list files are created. =cut sub listdir { my $self = shift; if (@_) { $_listdir = $_[0] } return $_listdir; } =pod =item C<< $tlpdb->config_src_container >> Returns 1 if the the texlive config option for src files splitting on container level is set. See Options below. =cut sub config_src_container { my $self = shift; my $tlp; if ($self->is_virtual) { $tlp = $self->{'tlpdbs'}{'main'}->get_package('00texlive.config'); } else { $tlp = $self->{'tlps'}{'00texlive.config'}; } if (defined($tlp)) { foreach my $d ($tlp->depends) { if ($d =~ m!^container_split_src_files/(.*)$!) { return "$1"; } } } return 0; } =pod =item C<< $tlpdb->config_doc_container >> Returns 1 if the the texlive config option for doc files splitting on container level is set. See Options below. =cut sub config_doc_container { my $self = shift; my $tlp; if ($self->is_virtual) { $tlp = $self->{'tlpdbs'}{'main'}->get_package('00texlive.config'); } else { $tlp = $self->{'tlps'}{'00texlive.config'}; } if (defined($tlp)) { foreach my $d ($tlp->depends) { if ($d =~ m!^container_split_doc_files/(.*)$!) { return "$1"; } } } return 0; } =pod =item C<< $tlpdb->config_doc_container >> Returns the currently set default container format. See Options below. =cut sub config_container_format { my $self = shift; my $tlp; if ($self->is_virtual) { $tlp = $self->{'tlpdbs'}{'main'}->get_package('00texlive.config'); } else { $tlp = $self->{'tlps'}{'00texlive.config'}; } if (defined($tlp)) { foreach my $d ($tlp->depends) { if ($d =~ m!^container_format/(.*)$!) { return "$1"; } } } return ""; } =pod =item C<< $tlpdb->config_release >> Returns the currently set release. See Options below. =cut sub config_release { my $self = shift; my $tlp; if ($self->is_virtual) { $tlp = $self->{'tlpdbs'}{'main'}->get_package('00texlive.config'); } else { $tlp = $self->{'tlps'}{'00texlive.config'}; } if (defined($tlp)) { foreach my $d ($tlp->depends) { if ($d =~ m!^release/(.*)$!) { return "$1"; } } } return ""; } =pod =item C<< $tlpdb->config_minrelease >> Returns the currently allowed minimal release. See Options below. =cut sub config_minrelease { my $self = shift; my $tlp; if ($self->is_virtual) { $tlp = $self->{'tlpdbs'}{'main'}->get_package('00texlive.config'); } else { $tlp = $self->{'tlps'}{'00texlive.config'}; } if (defined($tlp)) { foreach my $d ($tlp->depends) { if ($d =~ m!^minrelease/(.*)$!) { return "$1"; } } } return; } =pod =item C<< $tlpdb->config_revision >> Returns the currently set revision. See Options below. =cut sub config_revision { my $self = shift; my $tlp; if ($self->is_virtual) { $tlp = $self->{'tlpdbs'}{'main'}->get_package('00texlive.config'); } else { $tlp = $self->{'tlps'}{'00texlive.config'}; } if (defined($tlp)) { foreach my $d ($tlp->depends) { if ($d =~ m!^revision/(.*)$!) { return "$1"; } } } return ""; } =pod =item C<< $tlpdb->sizes_of_packages ( $opt_src, $opt_doc, $ref_arch_list, [ @packs ] ) >> This function returns a reference to a hash with package names as keys and the sizes in bytes as values. The sizes are computed for the arguments, or all packages if nothing was given. In case something has been computed one addition key is added C<__TOTAL__> which contains the total size of all packages under discussion. If the third argument is a reference to a list of architectures, then only the sizes for the binary packages for these architectures are used, otherwise all sizes for all architectures are summed up. =cut sub sizes_of_packages { my ($self, $opt_src, $opt_doc, $arch_list_ref, @packs) = @_; @packs || ( @packs = $self->list_packages() ); my @archs; if (defined($arch_list_ref)) { @archs = @$arch_list_ref; } # if nothing is passed on, then we keep @archs undefined, which means # use all architectures my %tlpsizes; my %tlpobjs; my $totalsize; foreach my $p (@packs) { $tlpobjs{$p} = $self->get_package($p); my $media = $self->media_of_package($p); if (!defined($tlpobjs{$p})) { warn "STRANGE: $p not to be found in ", $self->root; next; } $tlpsizes{$p} = $self->size_of_one_package($media, $tlpobjs{$p}, $opt_src, $opt_doc, @archs); $totalsize += $tlpsizes{$p}; } if ($totalsize) { $tlpsizes{'__TOTAL__'} = $totalsize; } return \%tlpsizes; } sub size_of_one_package { my ($self, $media, $tlpobj, $opt_src, $opt_doc, @used_archs) = @_; my $size = 0; if ($media ne 'local_uncompressed') { # we use the container size as the measuring unit since probably # downloading will be the limiting factor $size = $tlpobj->containersize; $size += $tlpobj->srccontainersize if $opt_src; $size += $tlpobj->doccontainersize if $opt_doc; } else { # we have to add the respective sizes, that is checking for # installation of src and doc file $size = $tlpobj->runsize; $size += $tlpobj->srcsize if $opt_src; $size += $tlpobj->docsize if $opt_doc; my %foo = %{$tlpobj->binsize}; for my $k (keys %foo) { if (@used_archs && member($k, @used_archs)) { $size += $foo{$k}; } } # all the packages sizes are in blocks, so transfer that to bytes $size *= $TeXLive::TLConfig::BlockSize; } return $size; } =pod =item C<< $tlpdb->install_package_files($f [, $f]) >> Install a package from a package file, i.e. a .tar.xz. Returns the number of packages actually installed successfully. =cut sub install_package_files { my ($self, @files) = @_; my $ret = 0; my $opt_src = $self->option("install_srcfiles"); my $opt_doc = $self->option("install_docfiles"); for my $f (@files) { # - create a tmp directory my $tmpdir = TeXLive::TLUtils::tl_tmpdir(); # - unpack everything there if (!TeXLive::TLUtils::unpack($f, $tmpdir)) { tlwarn("TLPDB::install_package_files: couldn't install $f\n"); next; } # we are still here, so the files have been unpacked properly # we need now to find the tlpobj in $tmpdir/tlpkg/tlpobj/ my ($tlpobjfile, $anotherfile) = <$tmpdir/tlpkg/tlpobj/*.tlpobj>; if (defined($anotherfile)) { # we found several tlpobj files, that is not allowed, stop tlwarn("TLPDB::install_package_files: several tlpobj files in $what in tlpkg/tlpobj/, stopping!\n"); next; } # - read the tlpobj from there my $tlpobj = TeXLive::TLPOBJ->new; $tlpobj->from_file($tlpobjfile); # we didn't die in this process, so that seems to be a proper tlpobj # (btw, why didn't I work on proper return values!?!) # # we are now ready for installation # if this package existed before, remove it from the tlpdb if ($self->get_package($tlpobj->name)) { $self->remove_package($tlpobj->name); } # code partially from TLPDB->not_virtual_install_package!!! my @installfiles = (); my $reloc = 1 if $tlpobj->relocated; foreach ($tlpobj->runfiles) { push @installfiles, $_; }; foreach ($tlpobj->allbinfiles) { push @installfiles, $_; }; if ($opt_src) { foreach ($tlpobj->srcfiles) { push @installfiles, $_; } } if ($opt_doc) { foreach ($tlpobj->docfiles) { push @installfiles, $_; } } # # remove the RELOC prefix, but do NOT replace it with RelocTree @installfiles = map { s!^$TeXLive::TLConfig::RelocPrefix/!!; $_; } @installfiles; # if the first argument of _install_package is scalar, it is the # place from where files should be installed if (!_install_package ($tmpdir, \@installfiles, $reloc, \@installfiles, $self)) { tlwarn("TLPDB::install_package_files: couldn't install $what!\n"); next; } if ($tlpobj->relocated) { $tlpobj->cancel_reloc_prefix; $tlpobj->relocated(0); } my $tlpod = $self->root . "/tlpkg/tlpobj"; mkdirhier( $tlpod ); open(TMP,">$tlpod/".$tlpobj->name.".tlpobj") or die("Cannot open tlpobj file for ".$tlpobj->name); $tlpobj->writeout(\*TMP); close(TMP); $self->add_tlpobj($tlpobj); $self->save; TeXLive::TLUtils::announce_execute_actions("enable", $tlpobj); # do the postinstallation actions # # Run the post installation code in the postaction tlpsrc entries # in case we are on w32 and the admin did install for himself only # we switch off admin mode if (win32() && admin() && !$totlpdb->option("w32_multi_user")) { non_admin(); } # for now desktop_integration maps to both installation # of desktop shortcuts and menu items, but we can split them later &TeXLive::TLUtils::do_postaction("install", $tlpobj, $self->option("file_assocs"), $self->option("desktop_integration"), $self->option("desktop_integration"), $self->option("post_code")); # remember that we installed this package correctly $ret++; } return $ret; } =pod =item C<< $tlpdb->install_package($pkg, $dest_tlpdb [, $tag]) >> Installs the package $pkg into $dest_tlpdb. If C<$tag> is present and the tlpdb is virtual, tries to install $pkg from the repository tagged with $tag. =cut sub install_package { my ($self, $pkg, $totlpdb, $tag) = @_; if ($self->is_virtual) { if (defined($tag)) { if (defined($self->{'packages'}{$pkg}{'tags'}{$tag})) { return $self->{'tlpdbs'}{$tag}->install_package($pkg, $totlpdb); } else { tlwarn("package $pkg not found in repository $tag\n"); return; } } else { my ($maxtag, $maxrev, $maxtlp, $maxtlpdb) = $self->virtual_candidate($pkg); return $maxtlpdb->install_package($pkg, $totlpdb); } } else { if (defined($tag)) { tlwarn("not a virtual database, ignoring tag $tag on installation of $pkg\n"); } return $self->not_virtual_install_package($pkg, $totlpdb); } return; } sub not_virtual_install_package { my ($self, $pkg, $totlpdb) = @_; my $fromtlpdb = $self; my $ret; die("TLPDB not initialized, cannot find tlpdb!") unless (defined($fromtlpdb)); my $tlpobj = $fromtlpdb->get_package($pkg); if (!defined($tlpobj)) { tlwarn("$0: Cannot find package $pkg\n"); return 0; } else { my $container_src_split = $fromtlpdb->config_src_container; my $container_doc_split = $fromtlpdb->config_doc_container; # get options about src/doc splitting from $totlpdb my $opt_src = $totlpdb->option("install_srcfiles"); my $opt_doc = $totlpdb->option("install_docfiles"); my $real_opt_doc = $opt_doc; my $reloc = 1 if $tlpobj->relocated; my $container; my @installfiles; my $root = $self->root; # make sure that there is no terminal / in $root, otherwise we # will get double // somewhere $root =~ s!/$!!; foreach ($tlpobj->runfiles) { # s!^!$root/!; push @installfiles, $_; } foreach ($tlpobj->allbinfiles) { # s!^!$root/!; push @installfiles, $_; } if ($opt_src) { foreach ($tlpobj->srcfiles) { # s!^!$root/!; push @installfiles, $_; } } if ($real_opt_doc) { foreach ($tlpobj->docfiles) { # s!^!$root/!; push @installfiles, $_; } } my $media = $self->media; if ($media eq 'local_uncompressed') { $container = \@installfiles; } elsif ($media eq 'local_compressed') { if (-r "$root/$Archive/$pkg.zip") { $container = "$root/$Archive/$pkg.zip"; } elsif (-r "$root/$Archive/$pkg.tar.xz") { $container = "$root/$Archive/$pkg.tar.xz"; } else { tlwarn("Cannot find a package $pkg (.zip or .xz) in $root/$Archive\n"); next; } } elsif (&media eq 'NET') { $container = "$root/$Archive/$pkg.$TeXLive::TLConfig::DefaultContainerExtension"; } $self->_install_package ($container, $reloc, \@installfiles, $totlpdb) || return(0); # if we are installing from local_compressed or NET we have to fetch the respective # source and doc packages $pkg.source and $pkg.doc and install them, too if (($media eq 'NET') || ($media eq 'local_compressed')) { # we install split containers under the following conditions: # - the container were split generated # - src/doc files should be installed # (- the package is not already a split one (like .i386-linux)) # the above test has been removed because it would mean that # texlive.infra.doc.tar.xz # will never be installed, and we do already check that there # are at all src/doc files, which in split packages of the form # foo.ARCH are not present. And if they are present, than that is fine, # too (bin-foobar.win32.doc.tar.xz) # - there are actually src/doc files present if ($container_src_split && $opt_src && $tlpobj->srcfiles) { my $srccontainer = $container; $srccontainer =~ s/(\.tar\.xz|\.zip)$/.source$1/; $self->_install_package ($srccontainer, $reloc, \@installfiles, $totlpdb) || return(0); } if ($container_doc_split && $real_opt_doc && $tlpobj->docfiles) { my $doccontainer = $container; $doccontainer =~ s/(\.tar\.xz|\.zip)$/.doc$1/; $self->_install_package ($doccontainer, $reloc, \@installfiles, $totlpdb) || return(0); } # # if we installed from NET/local_compressed and we got a relocatable container # make sure that the stray texmf-dist/tlpkg directory is removed # in USER MODE that should NOT be done because we keep the information # there, but for now do it unconditionally if ($tlpobj->relocated) { my $reloctree = $totlpdb->root . "/" . $TeXLive::TLConfig::RelocTree; my $tlpkgdir = $reloctree . "/" . $TeXLive::TLConfig::InfraLocation; my $tlpod = $tlpkgdir . "/tlpobj"; TeXLive::TLUtils::rmtree($tlpod) if (-d $tlpod); # we try to remove the tlpkg directory, that will succeed only # if it is empty. So in normal installations it won't be, but # if we are installing a relocated package it is texmf-dist/tlpkg # which will be (hopefully) empty rmdir($tlpkgdir) if (-d "$tlpkgdir"); } } # we don't want to have wrong information in the tlpdb, so remove the # src/doc files if they are not installed ... if (!$opt_src) { $tlpobj->clear_srcfiles; } if (!$real_opt_doc) { $tlpobj->clear_docfiles; } # if a package is relocatable we have to cancel the reloc prefix # and unset the relocated setting # before we save it to the local tlpdb if ($tlpobj->relocated) { $tlpobj->cancel_reloc_prefix; $tlpobj->relocated(0); } # we have to write out the tlpobj file since it is contained in the # archives (.tar.xz) but at DVD install time we don't have them my $tlpod = $totlpdb->root . "/tlpkg/tlpobj"; mkdirhier( $tlpod ); open(TMP,">$tlpod/".$tlpobj->name.".tlpobj") or die("Cannot open tlpobj file for ".$tlpobj->name); $tlpobj->writeout(\*TMP); close(TMP); $totlpdb->add_tlpobj($tlpobj); $totlpdb->save; # compute the return value TeXLive::TLUtils::announce_execute_actions("enable", $tlpobj); # do the postinstallation actions # # Run the post installation code in the postaction tlpsrc entries # in case we are on w32 and the admin did install for himself only # we switch off admin mode if (win32() && admin() && !$totlpdb->option("w32_multi_user")) { non_admin(); } # for now desktop_integration maps to both installation # of desktop shortcuts and menu items, but we can split them later &TeXLive::TLUtils::do_postaction("install", $tlpobj, $totlpdb->option("file_assocs"), $totlpdb->option("desktop_integration"), $totlpdb->option("desktop_integration"), $totlpdb->option("post_code")); } return 1; } # # _install_package # actually does the installation work # returns 1 on success and 0 on error # sub _install_package { my ($self, $what, $reloc, $filelistref, $totlpdb) = @_; my $target = $totlpdb->root; my $tempdir = "$target/temp"; my @filelist = @$filelistref; # we assume that $::progs has been set up! my $wget = $::progs{'wget'}; my $xzdec = TeXLive::TLUtils::quotify_path_with_spaces($::progs{'xzdec'}); if (!defined($wget) || !defined($xzdec)) { tlwarn("_install_package: programs not set up properly, strange.\n"); return(0); } if (ref $what) { # determine the root from where we install # if the first argument $self is a string, then it should be the # root from where to install the files, otherwise it should be # a TLPDB object (installation from DVD) my $root; if (!ref($self)) { $root = $self; } else { $root = $self->root; } # if we are installing a reloc, add the RelocTree to the target $target .= "/$TeXLive::TLConfig::RelocTree" if $reloc; foreach my $file (@$what) { # @what is taken, not @filelist! # is this still needed? my $dn=dirname($file); mkdirhier("$target/$dn"); TeXLive::TLUtils::copy "$root/$file", "$target/$dn"; } # we always assume that copy will work return(1); } elsif ($what =~ m,\.tar(\.xz)?$,) { $target .= "/$TeXLive::TLConfig::RelocTree" if $reloc; my $pkg = TeXLive::TLUtils::unpack($what, $target); if (!$pkg) { tlwarn("TLPDB::_install_package: couldn't unpack $what to $target\n"); return(0); } # remove the $pkg.tlpobj, we recreate it anyway again unlink ("$target/tlpkg/tlpobj/$pkg.tlpobj") if (-r "$target/tlpkg/tlpobj/$pkg.tlpobj"); return(1); } else { tlwarn("_install_package: Don't know how to install $what\n"); return(0); } } =pod =item << $tlpdb->remove_package($pkg, %options) >> removes a single package with all the files and the entry in the db. =cut # # remove_package removes a single package with all files (including the # # tlpobj files) and the entry from the tlpdb. sub remove_package { my ($self, $pkg, %opts) = @_; my $localtlpdb = $self; my $tlp = $localtlpdb->get_package($pkg); if (!defined($tlp)) { tlwarn ("$pkg: package not present, cannot remove\n"); } else { my $currentarch = $self->platform(); if ($pkg eq "texlive.infra" || $pkg eq "texlive.infra.$currentarch") { log ("Not removing $pkg, it is essential!\n"); return 0; } # we have to chdir to $localtlpdb->root my $Master = $localtlpdb->root; chdir ($Master) || die "chdir($Master) failed: $!"; my @files = $tlp->all_files; # also remove the .tlpobj file push @files, "tlpkg/tlpobj/$pkg.tlpobj"; # and the ones from src/doc splitting if (-r "tlpkg/tlpobj/$pkg.source.tlpobj") { push @files, "tlpkg/tlpobj/$pkg.source.tlpobj"; } if (-r "tlpkg/tlpobj/$pkg.doc.tlpobj") { push @files, "tlpkg/tlpobj/$pkg.doc.tlpobj"; } # # some packages might be relocated, thus having the RELOC prefix # in user mode we just remove the prefix, in normal mode we # replace it with texmf-dist # since we don't have user mode if ($tlp->relocated) { for (@files) { s:^$RelocPrefix/:$RelocTree/:; } } # # we want to check that a file is only listed in one package, so # in case that a file to be removed is listed in another package # we will warn and *not* remove it my %allfiles; for my $p ($localtlpdb->list_packages) { next if ($p eq $pkg); # we have to skip the to be removed package for my $f ($localtlpdb->get_package($p)->all_files) { $allfiles{$f} = $p; } } my @goodfiles = (); my @badfiles = (); my @debugfiles = (); for my $f (@files) { # in usermode we have to add texmf-dist again for comparison if (defined($allfiles{$f})) { # this file should be removed but is mentioned somewhere, too # take into account if we got a warn list if (defined($opts{'remove-warn-files'})) { my %a = %{$opts{'remove-warn-files'}}; if (defined($a{$f})) { push @badfiles, $f; } else { # NO NOTHING HERE!!! # DON'T PUSH IT ON @goodfiles, it will be removed, which we do # NOT want. We only want to supress the warning! push @debugfiles, $f; } } else { push @badfiles, $f; } } else { push @goodfiles, $f; } } if ($#debugfiles >= 0) { debug("The following files will not be removed due to the removal of $pkg.\n"); debug("But we do not warn on it because they are moved to other packages.\n"); for my $f (@debugfiles) { debug(" $f - $allfiles{$f}\n"); } } if ($#badfiles >= 0) { # warn the user tlwarn("The following files should be removed due to the removal of $pkg,\n"); tlwarn("but are part of another package, too.\n"); for my $f (@badfiles) { tlwarn(" $f - $allfiles{$f}\n"); } } # # Run only the postaction code thing now since afterwards the # files will be gone ... if (defined($opts{'nopostinstall'}) && $opts{'nopostinstall'}) { &TeXLive::TLUtils::do_postaction("remove", $tlp, 0, # option_file_assocs, 0, # option_desktop_integration, menu part 0, # option_desktop_integration, desktop part $localtlpdb->option("post_code")); } # my @removals = &TeXLive::TLUtils::removed_dirs (@goodfiles); # now do the removal for my $entry (@goodfiles) { unlink $entry; } for my $d (@removals) { rmdir $d; } $localtlpdb->remove_tlpobj($pkg); TeXLive::TLUtils::announce_execute_actions("disable", $tlp); # should we save at each removal??? # advantage: the tlpdb actually reflects what is installed # disadvantage: removing a collection calls the save routine several times # still I consider it better that the tlpdb is in a consistent state $localtlpdb->save; # # Run the post installation code in the postaction tlpsrc entries # in case we are on w32 and the admin did install for himself only # we switch off admin mode if (win32() && admin() && !$localtlpdb->option("w32_multi_user")) { non_admin(); } # # Run the post installation code in the postaction tlpsrc entries # the postaction code part cannot be evaluated now since the # files are already removed. # Again, desktop integration maps to desktop and menu links if (!$opts{'nopostinstall'}) { &TeXLive::TLUtils::do_postaction("remove", $tlp, $localtlpdb->option("file_assocs"), $localtlpdb->option("desktop_integration"), $localtlpdb->option("desktop_integration"), 0); } } return 1; } =pod =item C<< $tlpdb->option($key [, $val]) >> =item C<< $tlpdb->setting($key [, $val]) >> Need to be documented =cut sub _set_option_value { my $self = shift; $self->_set_value_pkg('00texlive.installation', 'opt_', @_); } sub _set_setting_value { my $self = shift; $self->_set_value_pkg('00texlive.installation', 'setting_', @_); } sub _set_value_pkg { my ($self,$pkgname,$pre,$key,$value) = @_; my $k = "$pre$key"; my $pkg; if ($self->is_virtual) { $pkg = $self->{'tlpdbs'}{'main'}->get_package($pkgname); } else { $pkg = $self->{'tlps'}{$pkgname}; } my @newdeps; if (!defined($pkg)) { $pkg = new TeXLive::TLPOBJ; $pkg->name($pkgname); $pkg->category("TLCore"); push @newdeps, "$k:$value"; } else { my $found = 0; foreach my $d ($pkg->depends) { if ($d =~ m!^$k:!) { $found = 1; push @newdeps, "$k:$value"; } else { push @newdeps, $d; } } if (!$found) { push @newdeps, "$k:$value"; } } $pkg->depends(@newdeps); $self->add_tlpobj($pkg); } sub _clear_option { my $self = shift; $self->_clear_pkg('00texlive.installation', 'opt_', @_); } sub _clear_setting { my $self = shift; $self->_clear_pkg('00texlive.installation', 'setting_', @_); } sub _clear_pkg { my ($self,$pkgname,$pre,$key) = @_; my $k = "$pre$key"; my $pkg; if ($self->is_virtual) { $pkg = $self->{'tlpdbs'}{'main'}->get_package($pkgname); } else { $pkg = $self->{'tlps'}{$pkgname}; } my @newdeps; if (!defined($pkg)) { return; } else { foreach my $d ($pkg->depends) { if ($d =~ m!^$k:!) { # do nothing, we drop the value } else { push @newdeps, $d; } } } $pkg->depends(@newdeps); $self->add_tlpobj($pkg); } sub _get_option_value { my $self = shift; $self->_get_value_pkg('00texlive.installation', 'opt_', @_); } sub _get_setting_value { my $self = shift; $self->_get_value_pkg('00texlive.installation', 'setting_', @_); } sub _get_value_pkg { my ($self,$pkg,$pre,$key) = @_; my $k = "$pre$key"; my $tlp; if ($self->is_virtual) { $tlp = $self->{'tlpdbs'}{'main'}->get_package($pkg); } else { $tlp = $self->{'tlps'}{$pkg}; } if (defined($tlp)) { foreach my $d ($tlp->depends) { if ($d =~ m!^$k:(.*)$!) { return "$1"; } } return; } tlwarn("$pkg not found, cannot read option $key.\n"); return; } sub option_pkg { my $self = shift; my $pkg = shift; my $key = shift; if (@_) { $self->_set_value_pkg($pkg, "opt_", $key, shift); } my $ret = $self->_get_value_pkg($pkg, "opt_", $key); # special case for location == __MASTER__ if (defined($ret) && $ret eq "__MASTER__" && $key eq "location") { return $self->root; } return $ret; } sub option { my $self = shift; my $key = shift; if (@_) { $self->_set_option_value($key, shift); } my $ret = $self->_get_option_value($key); # special case for location == __MASTER__ if (defined($ret) && $ret eq "__MASTER__" && $key eq "location") { return $self->root; } return $ret; } sub setting_pkg { my $self = shift; my $pkg = shift; my $key = shift; if (@_) { if ($TLPDBSettings{$key}->[0] eq "l") { $self->_set_value_pkg($pkg, "setting_", $key, "@_"); } else { $self->_set_value_pkg($pkg, "setting_", $key, shift); } } my $ret = $self->_get_value_pkg($pkg, "setting_", $key); # check the types of the settings, and if it is a "l" return a list if ($TLPDBSettings{$key}->[0] eq "l") { my @ret; if (defined $ret) { @ret = split(" ", $ret); } else { tlwarn "TLPDB::setting_pkg: no $key, returning empty list ...\n"; @ret = (); } return @ret; } return $ret; } sub setting { my $self = shift; my $key = shift; if ($key eq "-clear") { my $realkey = shift; $self->_clear_setting($realkey); return; } if (@_) { if ($TLPDBSettings{$key}->[0] eq "l") { $self->_set_setting_value($key, "@_"); } else { $self->_set_setting_value($key, shift); } } my $ret = $self->_get_setting_value($key); # check the types of the settings, and if it is a "l" return a list if ($TLPDBSettings{$key}->[0] eq "l") { my @ret; if (defined $ret) { @ret = split(" ", $ret); } else { tlwarn "TLPDB::setting: no $key, returning empty list ...\n"; @ret = (); } return @ret; } return $ret; } sub reset_options { my $self = shift; for my $k (keys %TeXLive::TLConfig::TLPDBOptions) { $self->option($k, $TeXLive::TLConfig::TLPDBOptions{$k}->[1]); } } sub add_default_options { my $self = shift; for my $k (sort keys %TeXLive::TLConfig::TLPDBOptions) { # if the option is not set already, do set it to defaults if (! $self->option($k) ) { $self->option($k, $TeXLive::TLConfig::TLPDBOptions{$k}->[1]); } } } =pod =item C<< $tlpdb->options >> Returns a reference to a hash with option names. =cut sub _keyshash { my ($self, $pre, $hr) = @_; my @allowed = keys %$hr; my %ret; my $pkg; if ($self->is_virtual) { $pkg = $self->{'tlpdbs'}{'main'}->get_package('00texlive.installation'); } else { $pkg = $self->{'tlps'}{'00texlive.installation'}; } if (defined($pkg)) { foreach my $d ($pkg->depends) { if ($d =~ m!^$pre([^:]*):(.*)!) { if (member($1, @allowed)) { $ret{$1} = $2; } else { tlwarn("Unsupported option/setting $d\n"); } } } } return \%ret; } sub options { my $self = shift; return ($self->_keyshash('opt_', \%TLPDBOptions)); } sub settings { my $self = shift; return ($self->_keyshash('setting_', \%TLPDBSettings)); } =pod =item C<< $tlpdb->format_definitions >> This function returns a list of references to hashes where each hash represents a parsed AddFormat line. =cut sub format_definitions { my $self = shift; my @ret; foreach my $p ($self->list_packages) { my $obj = $self->get_package ($p); die "$0: No TeX Live package named $p, strange" if ! $obj; push @ret, $obj->format_definitions; } return(@ret); } =item C<< $tlpdb->fmtutil_cnf_lines >> The function C returns the list of a fmtutil.cnf file containing only those formats present in the installation. Every format listed in the tlpdb but listed in the arguments will not be included in the list of lines returned. =cut sub fmtutil_cnf_lines { my $self = shift; my @lines; foreach my $p ($self->list_packages) { my $obj = $self->get_package ($p); die "$0: No TeX Live package named $p, strange" if ! $obj; push @lines, $obj->fmtutil_cnf_lines(@_); } return(@lines); } =item C<< $tlpdb->updmap_cfg_lines ( [@disabled_maps] ) >> The function C returns the list of a updmap.cfg file containing only those maps present in the installation. A map file mentioned in the tlpdb but listed in the arguments will not be included in the list of lines returned. =cut sub updmap_cfg_lines { my $self = shift; my @lines; foreach my $p ($self->list_packages) { my $obj = $self->get_package ($p); die "$0: No TeX Live package named $p, strange" if ! $obj; push @lines, $obj->updmap_cfg_lines(@_); } return(@lines); } =item C<< $tlpdb->language_dat_lines ( [@disabled_hyphen_names] ) >> The function C returns the list of all lines for language.dat that can be generated from the tlpdb. Every hyphenation pattern listed in the tlpdb but listed in the arguments will not be included in the list of lines returned. =cut sub language_dat_lines { my $self = shift; my @lines; foreach my $p ($self->list_packages) { my $obj = $self->get_package ($p); die "$0: No TeX Live package named $p, strange" if ! $obj; push @lines, $obj->language_dat_lines(@_); } return(@lines); } =item C<< $tlpdb->language_def_lines ( [@disabled_hyphen_names] ) >> The function C returns the list of all lines for language.def that can be generated from the tlpdb. Every hyphenation pattern listed in the tlpdb but listed in the arguments will not be included in the list of lines returned. =cut sub language_def_lines { my $self = shift; my @lines; foreach my $p ($self->list_packages) { my $obj = $self->get_package ($p); die "$0: No TeX Live package named $p, strange" if ! $obj; push @lines, $obj->language_def_lines(@_); } return(@lines); } =item C<< $tlpdb->language_lua_lines ( [@disabled_hyphen_names] ) >> The function C returns the list of all lines for language.dat.lua that can be generated from the tlpdb. Every hyphenation pattern listed in the tlpdb but listed in the arguments will not be included in the list of lines returned. =cut sub language_lua_lines { my $self = shift; my @lines; foreach my $p ($self->list_packages) { my $obj = $self->get_package ($p); die "$0: No TeX Live package named $p, strange" if ! $obj; push @lines, $obj->language_lua_lines(@_); } return(@lines); } =back =head1 VIRTUAL DATABASES The purpose of virtual databases is to collect several data sources and present them in one way. The normal functions will always return the best candidate for the set of functions. More docs to be written =cut # # packages are saved: # $self->{'packages'}{$pkgname}{'tags'}{$tag}{'revision'} = $rev # $self->{'packages'}{$pkgname}{'tags'}{$tag}{'tlp'} = $tlp # $self->{'packages'}{$pkgname}{'target'} = $target_tag # sub is_virtual { my $self = shift; if (defined($self->{'virtual'}) && $self->{'virtual'}) { return 1; } return 0; } sub make_virtual { my $self = shift; if (!$self->is_virtual) { if ($self->list_packages) { tlwarn("Cannot convert a initialized tlpdb to virtual for now!\n"); return 0; } $self->{'virtual'} = 1; } return 1; } sub virtual_get_tlpdb { my ($self, $tag) = @_; if (!$self->is_virtual) { tlwarn("Cannot remove tlpdb from a non-virtual tlpdb!\n"); return 0; } if (!defined($self->{'tlpdbs'}{$tag})) { tlwarn("TLPDB virtual_get_tlpdb: unknown tag $tag\n"); return 0; } return $self->{'tlpdbs'}{$tag}; } sub virtual_add_tlpdb { my ($self, $tlpdb, $tag) = @_; if (!$self->is_virtual) { tlwarn("Cannot add tlpdb to a non-virtual tlpdb!\n"); return 0; } $self->{'tlpdbs'}{$tag} = $tlpdb; for my $p ($tlpdb->list_packages) { my $tlp = $tlpdb->get_package($p); $self->{'packages'}{$p}{'tags'}{$tag}{'revision'} = $tlp->revision; $self->{'packages'}{$p}{'tags'}{$tag}{'tlp'} = $tlp; } $self->check_evaluate_pinning(); return 1; } sub virtual_remove_tlpdb { my ($self, $tag) = @_; if (!$self->is_virtual) { tlwarn("Cannot remove tlpdb from a non-virtual tlpdb!\n"); return 0; } if (!defined($self->{'tlpdbs'}{$tag})) { tlwarn("TLPDB virtual_remove_tlpdb: unknown tag $tag\n"); return 0; } for my $p ($self->{'tlpdbs'}{$tag}->list_packages) { delete $self->{'packages'}{$p}{'tags'}{$tag}; } delete $self->{'tlpdbs'}{$tag}; $self->check_evaluate_pinning(); return 1; } sub virtual_get_package { my ($self, $pkg, $tag) = @_; if (defined($self->{'packages'}{$pkg}{'tags'}{$tag})) { return $self->{'packages'}{$pkg}{'tags'}{$tag}{'tlp'}; } else { tlwarn("pkg $pkg not found in tag $tag\n"); return; } } =item C<< $tlpdb->candidates ( $pkg ) >> Returns the list of candidates for the given package in the format tag/revision If the returned list is empty, then the database was not virtual and no install candidate was found. If the returned list contains undef as first element, the database is virtual, and no install candidate was found. The remaining elements in the list are all repositories that provide that package. Note that there might not be an install candidate, but still the package is provided by a sub-repository. This can happen if a package is present only in the sub-repository and there is no explicit pin for that package in the pinning file. =cut sub is_repository { my $self = shift; my $tag = shift; if (!$self->is_virtual) { return ( ($tag eq $self->{'root'}) ? 1 : 0 ); } return ( defined($self->{'tlpdbs'}{$tag}) ? 1 : 0 ); } # returns a list of tag/rev sub candidates { my $self = shift; my $pkg = shift; my @ret = (); if ($self->is_virtual) { if (defined($self->{'packages'}{$pkg})) { my $t = $self->{'packages'}{$pkg}{'target'}; if (defined($t)) { push @ret, "$t/" . $self->{'packages'}{$pkg}{'tags'}{$t}{'revision'}; } else { $t = ""; # no target found, but maybe available somewhere else, # we return undef as first one push @ret, undef; } # make sure that we always check for main as repo my @repos = keys %{$self->{'packages'}{$pkg}}; for my $r (sort keys %{$self->{'packages'}{$pkg}{'tags'}}) { push @ret, "$r/" . $self->{'packages'}{$pkg}{'tags'}{$r}{'revision'} if ($t ne $r); } } } else { my $tlp = $self->get_package($pkg); if (defined($tlp)) { push @ret, "main/" . $tlp->revision; } } return @ret; } =item C<< $tlpdb->candidate ( ) >> Returns either a list of four undef, if no install candidate is found, or the following information on the install candidate as list: the tag name of the repository, the revision number of the package in the candidate repository, the tlpobj of the package in the candidate repository, and the candidate repository's TLPDB itself. =cut # sub virtual_candidate { my ($self, $pkg) = @_; my $t = $self->{'packages'}{$pkg}{'target'}; if (defined($t)) { return ($t, $self->{'packages'}{$pkg}{'tags'}{$t}{'revision'}, $self->{'packages'}{$pkg}{'tags'}{$t}{'tlp'}, $self->{'tlpdbs'}{$t}); } return(undef,undef,undef,undef); } =item C<< $tlpdb->virtual_pinning ( [ $pinfile_TLConfFile] ) >> Sets or returns the C object for the pinning data. =cut sub virtual_pindata { my $self = shift; return ($self->{'pindata'}); } sub virtual_update_pins { my $self = shift; if (!$self->is_virtual) { tlwarn("Not-virtual databases cannot have pinning data.\n"); return 0; } my $pincf = $self->{'pinfile'}; my @pins; for my $k ($pincf->keys) { for my $v ($pincf->value($k)) { # we recompose the values into lines again, as we *might* have # options later, i.e., lines of the format # repo:pkg:opt push @pins, $self->make_pin_data_from_line("$k:$v"); } } $self->{'pindata'} = \@pins; $self->check_evaluate_pinning(); return ($self->{'pindata'}); } sub virtual_pinning { my ($self, $pincf) = @_; if (!$self->is_virtual) { tlwarn("Not-virtual databases cannot have pinning data.\n"); return 0; } if (!defined($pincf)) { return ($self->{'pinfile'}); } $self->{'pinfile'} = $pincf; $self->virtual_update_pins(); return ($self->{'pinfile'}); } # # current format: # :[,,...][:] # only supported options for now is # revision # meaning that, if for the selected package there is no other # "non-revision" pinning, then all repo/package versions are compared # using normal revision comparison, and the biggest revision number wins. # That allows you to have the same package in several repos: # repo1:foo:revision # repo2:foo:revision # repo1:* # repo2:* # means that: # for package "foo" the revision numbers of "foo" in the repos "repo1", # "repo2", and "main" are numerically compared and biggest number wins. # for all other packages of "repo1" and "repo2", other other repositories # are not considered. # # NOT IMPLEMENTED YET!!! # # $pin{'repo'} = $repo; # $pin{'glob'} = $glob; # $pin{'re'} = $re; # $pin{'line'} = $line; # for debug/warning purpose sub make_pin_data_from_line { my $self = shift; my $l = shift; my ($a, $b, $c) = split(/:/, $l); my @ret; my %m; $m{'repo'} = $a; $m{'line'} = $l; if (defined($c)) { $m{'options'} = $c; } # split the package globs for (split(/,/, $b)) { # remove leading and terminal white space s/^\s*//; s/\s*$//; my %mm = %m; $mm{'glob'} = $_; $mm{'re'} = glob_to_regex($_); push @ret, \%mm; } return @ret; } sub check_evaluate_pinning { my $self = shift; my @pins = (defined($self->{'pindata'}) ? @{$self->{'pindata'}} : ()); # # run through the pin lines and make sure that all the conditions # and requirements are obeyed my %pkgs = %{$self->{'packages'}}; # main:* my ($mainpin) = $self->make_pin_data_from_line("main:*"); # the default main:* is always considered to be matched $mainpin->{'hit'} = 1; push @pins, $mainpin; for my $pkg (keys %pkgs) { PINS: for my $pp (@pins) { my $pre = $pp->{'re'}; if (($pkg =~ m/$pre/) && (defined($self->{'packages'}{$pkg}{'tags'}{$pp->{'repo'}}))) { $self->{'packages'}{$pkg}{'target'} = $pp->{'repo'}; # register that this pin was hit $pp->{'hit'} = 1; last PINS; } } } # check that all pinning lines where hit for my $p (@pins) { next if defined($p->{'hit'}); tlwarn("tlmgr: pinning warning: the package pattern ", $p->{'glob'}, " on the line:\n ", $p->{'line'}, "\n does not match any package\n"); } } # implementation copied from Text/Glob.pm (copyright Richard Clamp). # changes made: # remove $strict_leading_dot and $strict_wildcard_slash if calls # and execute the code unconditionally, as we do not change the # default settings of 1 of these two variables. sub glob_to_regex { my $glob = shift; my $regex = glob_to_regex_string($glob); return qr/^$regex$/; } sub glob_to_regex_string { my $glob = shift; my ($regex, $in_curlies, $escaping); local $_; my $first_byte = 1; for ($glob =~ m/(.)/gs) { if ($first_byte) { $regex .= '(?=[^\.])' unless $_ eq '.'; $first_byte = 0; } if ($_ eq '/') { $first_byte = 1; } if ($_ eq '.' || $_ eq '(' || $_ eq ')' || $_ eq '|' || $_ eq '+' || $_ eq '^' || $_ eq '$' || $_ eq '@' || $_ eq '%' ) { $regex .= "\\$_"; } elsif ($_ eq '*') { $regex .= $escaping ? "\\*" : "[^/]*"; } elsif ($_ eq '?') { $regex .= $escaping ? "\\?" : "[^/]"; } elsif ($_ eq '{') { $regex .= $escaping ? "\\{" : "("; ++$in_curlies unless $escaping; } elsif ($_ eq '}' && $in_curlies) { $regex .= $escaping ? "}" : ")"; --$in_curlies unless $escaping; } elsif ($_ eq ',' && $in_curlies) { $regex .= $escaping ? "," : "|"; } elsif ($_ eq "\\") { if ($escaping) { $regex .= "\\\\"; $escaping = 0; } else { $escaping = 1; } next; } else { $regex .= $_; $escaping = 0; } $escaping = 0; } print "# $glob $regex\n" if debug; return $regex; } sub match_glob { print "# ", join(', ', map { "'$_'" } @_), "\n" if debug; my $glob = shift; my $regex = glob_to_regex $glob; local $_; grep { $_ =~ $regex } @_; } =pod =head1 OPTIONS Options regarding the full TeX Live installation to be described are saved in a package C<00texlive.config> as values of C lines. This special package C<00texlive.config> does not contain any files, only depend lines which set one or more of the following options: =over 4 =item C =item C These options specify that at container generation time the source and documentation files for a package have been put into a separate container named C and C. =item C> This option specifies a format for containers. The currently supported formats are C and C. But note that C is untested. =item C> This option specifies the current release. The first four characters must be a year. =item C> This option specifies the minimum release for which this repository is valid. =back To set these options the respective lines should be added to C<00texlive.config.tlpsrc>. =head1 SEE ALSO The modules L, L, L, L and the document L and the specification in the TeX Live repository trunk/Master/tlpkg/doc/. =head1 AUTHORS AND COPYRIGHT This script and its documentation were written for the TeX Live distribution (L) and both are licensed under the GNU General Public License Version 2 or later. =cut 1; ### Local Variables: ### perl-indent-level: 2 ### tab-width: 2 ### indent-tabs-mode: nil ### End: # vim:set tabstop=2 expandtab autoindent: #