#!/usr/bin/env perl # mupdmap: utility to maintain map files for outline fonts. # $Id: updmap.pl 26891 2012-06-10 22:41:49Z karl $ # # Copyright 2011, 2012 Norbert Preining # This file is licensed under the GNU General Public License version 2 # or any later version. # # History: # Original shell script (C) 2002 Thomas Esser # first perl variant (C) Fabrice Popineau # later adaptions by Reinhard Kotucha and Karl Berry # the original versions were licensed under the following agreement: # Anyone may freely use, modify, and/or distribute this file, without # limitation. # # TODO # - check all other invocations # - after TL2012? Maybe remove support for reading updmap-local.cfg # my $TEXMFROOT; BEGIN { $^W=1; $TEXMFROOT = `kpsewhich -var-value=TEXMFROOT`; if ($?) { print STDERR "updmap: Cannot find TEXMFROOT, aborting!\n"; exit 1; } chomp($TEXMFROOT); unshift (@INC, "$TEXMFROOT/tlpkg"); } my $version = '$Id: updmap.pl 26891 2012-06-10 22:41:49Z karl $'; use Getopt::Long qw(:config no_autoabbrev ignore_case_always); use strict; use TeXLive::TLUtils qw(mkdirhier mktexupd win32 basename dirname sort_uniq member); #use Data::Dumper; #$Data::Dumper::Indent = 1; (my $prg = basename($0)) =~ s/\.pl$//; # sudo sometimes does not reset the home dir of root, check on that # see more comments at the definition of the function itself # this function checks by itself whether it is running on windows or not reset_root_home(); chomp(my $TEXMFMAIN = `kpsewhich --var-value=TEXMFMAIN`); chomp(my $TEXMFVAR = `kpsewhich -var-value=TEXMFVAR`); chomp(my $TEXMFCONFIG = `kpsewhich -var-value=TEXMFCONFIG`); # make sure that on windows *everything* is in lower case for comparison if (win32()) { $TEXMFMAIN = lc($TEXMFMAIN); $TEXMFVAR = lc($TEXMFVAR); $TEXMFCONFIG = lc($TEXMFCONFIG); $TEXMFROOT = lc($TEXMFROOT); } my %opts = ( quiet => 0, nohash => 0, nomkmap => 0 ); my $alldata; my $updLSR; my @cmdline_options = ( "listfiles", "cnffile=s@", "copy", "disable=s@", "dvipdfmoutputdir=s", "dvipdfmxoutputdir=s", "dvipsoutputdir=s", # the following does not work, Getopt::Long looses the first # entry in a multi setting, treat it separately in processOptions # furthermore, it is not supported by older perls, so do it differently #"enable=s{1,2}", "edit", "force", "listavailablemaps", "listmaps|l", "nohash", "nomkmap", "dry-run|n", "outputdir=s", "pdftexoutputdir=s", "pxdvioutputdir=s", "quiet|silent|q", # the following is a correct specification of an option according # to the manual, but it does not work! # we will treat that option by itself in processOptions # furthermore, it is not supported by older perls, so do it differently #"setoption=s@{1,2}", "showoptions=s@", "showoption=s@", "syncwithtrees", "version", "help|h", # some debugging invocations "_readsave=s", ); my %settings = ( dvipsPreferOutline => { type => "binary", default => "true", }, LW35 => { type => "string", possible => [ qw/URW URWkb ADOBE ADOBEkb/ ], default => "URWkb", }, dvipsDownloadBase35 => { type => "binary", default => "true", }, pdftexDownloadBase14 => { type => "binary", default => "true", }, dvipdfmDownloadBase14 => { type => "binary", default => "true", }, pxdviUse => { type => "binary", default => "false", }, kanjiEmbed => { type => "any", default => "noEmbed", }, kanjiVariant => { type => "any", default => "", }, ); &main(); ############### sub main { processOptions(); help() if $opts{'help'}; if ($opts{'version'}) { print version(); exit (0); } if ($opts{'dvipdfmoutputdir'} && !defined($opts{'dvipdfmxoutputdir'})) { $opts{'dvipdfmxoutputdir'} = $opts{'dvipdfmoutputdir'}; printf STDERR "Using --dvipdfmoutputdir options for dvipdfmx, but please use --dvipdfmxoutputdir\n"; } if ($opts{'dvipdfmoutputdir'} && $opts{'dvipdfmxoutputdir'} && $opts{'dvipdfmoutputdir'} ne $opts{'dvipdfmxoutputdir'}) { printf STDERR "Options for --dvipdfmoutputdir and --dvipdfmxoutputdir do not agree\nplease use only --dvipdfmxoutputdir. Exiting.\n"; exit(1); } if ($opts{'_readsave'}) { read_updmap_files($opts{'_readsave'}); print "READING DONE ============================\n"; #print Dumper($alldata); $alldata->{'updmap'}{$opts{'_readsave'}}{'changed'} = 1; save_updmap($opts{'_readsave'}); exit 0; } if ($opts{'showoptions'}) { for my $o (@{$opts{'showoptions'}}) { if (defined($settings{$o})) { if ($settings{$o}{'type'} eq "binary") { print "true false\n"; } elsif ($settings{$o}{'type'} eq "string") { print "@{$settings{$o}{'possible'}}\n"; } elsif ($settings{$o}{'type'} eq "any") { print "(any string)\n"; } else { print "strange: unknown type of option $o\nplease report\n"; } } else { print "$prg: unknown option: $o\n"; } } exit 0; } # config file for changes my $changes_config_file; # determine which config files should be used # replaces the former "setupCfgFile" # # we also determine here where changes will be saved to if ($opts{'cnffile'}) { my @tmp; for my $f (@{$opts{'cnffile'}}) { if (! -f $f) { die "$prg: Config file \"$f\" not found."; } push @tmp, (win32() ? lc($f) : $f); } @{$opts{'cnffile'}} = @tmp; # in case that config files are given on the command line, the first # in the list is the one where changes will be written to. ($changes_config_file) = @{$opts{'cnffile'}}; } else { my @all_files = `kpsewhich -all updmap.cfg`; chomp(@all_files); my @used_files; for my $f (@all_files) { push @used_files, (win32() ? lc($f) : $f); } # chomp(my $TEXMFLOCAL =`kpsewhich --var-value=TEXMFLOCAL`); chomp(my $TEXMFHOME =`kpsewhich --var-value=TEXMFHOME`); if (win32()) { $TEXMFLOCAL = lc($TEXMFLOCAL); $TEXMFHOME = lc($TEXMFHOME); } # # search for TEXMFLOCAL/web2c/updmap.cfg # see compatibility with updmap-local.cfg below my $found = 0; my $TMLabs = Cwd::abs_path($TEXMFLOCAL); if ($TMLabs) { for my $f (@used_files) { my $absf = Cwd::abs_path($f); #should always work if ($absf =~ m/^\Q$TMLabs\E/) { $found = 1; last; } } } # # backward compatibility with TL2011 and before updmap-local.cfg # we read this instead of TEXMFLOCAL/web2c/updmap.cfg, but give # a big fat warning my $old_updmap_local_found = 0; if (-r "$TMLabs/web2c/updmap-local.cfg") { $old_updmap_local_found = 1; warning("Old configuration file TEXMFLOCAL/web2c/updmap-local.cfg found!\n"); if ($found) { warning("Will read this file *instead* of TEXMFLOCAL/web2c/updmap.cfg!!!\n"); # rest of the action is done in the reordering of cfg files } else { # if TEXMFLOCAL updmap.cfg does not exist, we have to make sure # that the replacement is added to the list of updmap files push @used_files, "$TMLabs/web2c/updmap-local.cfg"; } warning("Please consider moving the information from updmap-local.cfg to TEXMFLOCAL/web2c/updmap.cfg\n"); } # # reorder used files: we move TEXMFLOCAL (if used) just above TEXMFMAIN # as sysadmins will probably adjust values there # # updmap (user): # ============== # as found: # TEXMFCONFIG $HOME/.texliveYYYY/texmf-config/web2c/updmap.cfg # TEXMFVAR $HOME/.texliveYYYY/texmf-var/web2c/updmap.cfg # TEXMFHOME $HOME/texmf/web2c/updmap.cfg # TEXMFSYSCONFIG $TEXLIVE/YYYY/texmf-config/web2c/updmap.cfg # TEXMFSYSVAR $TEXLIVE/YYYY/texmf-var/web2c/updmap.cfg # TEXMFMAIN $TEXLIVE/YYYY/texmf/web2c/updmap.cfg # TEXMFLOCAL $TEXLIVE/texmf-local/web2c/updmap.cfg # TEXMFDIST $TEXLIVE/YYYY/texmf-dist/web2c/updmap.cfg # # as used: # TEXMFCONFIG $HOME/.texliveYYYY/texmf-config/web2c/updmap.cfg # TEXMFVAR $HOME/.texliveYYYY/texmf-var/web2c/updmap.cfg # TEXMFHOME $HOME/texmf/web2c/updmap.cfg # TEXMFSYSCONFIG $TEXLIVE/YYYY/texmf-config/web2c/updmap.cfg # TEXMFSYSVAR $TEXLIVE/YYYY/texmf-var/web2c/updmap.cfg # TEXMFLOCAL $TEXLIVE/texmf-local/web2c/updmap.cfg # TEXMFMAIN $TEXLIVE/YYYY/texmf/web2c/updmap.cfg # TEXMFDIST $TEXLIVE/YYYY/texmf-dist/web2c/updmap.cfg # # updmap-sys (root): # ================== # as found: # TEXMFSYSCONFIG $TEXLIVE/YYYY/texmf-config/web2c/updmap.cfg # TEXMFSYSVAR $TEXLIVE/YYYY/texmf-var/web2c/updmap.cfg # TEXMFMAIN $TEXLIVE/YYYY/texmf/web2c/updmap.cfg # TEXMFLOCAL $TEXLIVE/texmf-local/web2c/updmap.cfg # TEXMFDIST $TEXLIVE/YYYY/texmf-dist/web2c/updmap.cfg # # as used: # TEXMFSYSCONFIG $TEXLIVE/YYYY/texmf-config/web2c/updmap.cfg # TEXMFSYSVAR $TEXLIVE/YYYY/texmf-var/web2c/updmap.cfg # TEXMFLOCAL $TEXLIVE/texmf-local/web2c/updmap.cfg # TEXMFMAIN $TEXLIVE/YYYY/texmf/web2c/updmap.cfg # TEXMFDIST $TEXLIVE/YYYY/texmf-dist/web2c/updmap.cfg # if ($found || $old_updmap_local_found) { my @tmp; for my $f (@used_files) { if ($f =~ m!\Q$TEXMFMAIN/\E!) { if ($old_updmap_local_found) { push @tmp, "$TEXMFLOCAL/web2c/updmap-local.cfg"; } else { # since we are under if ($found || $old_updmap_local_found) # we know that TEXMFLOCAL/web2c/updmap.cfg exists! push @tmp, "$TEXMFLOCAL/web2c/updmap.cfg"; } push @tmp, $f; } else { if ($f !~ m!\Q$TEXMFLOCAL\E!) { push @tmp, $f; } } } @used_files = @tmp; } @{$opts{'cnffile'}} = @used_files; # determine the config file that we will use for changes # if in the list of used files contains either one from # TEXMFHOME or TEXMFCONFIG (which is TEXMFSYSCONFIG in the -sys case) # then use the *top* file (which will be either one of the two), # if none of the two exists, create a file in TEXMFCONFIG and use it my $use_top = 0; for my $f (@used_files) { if ($f =~ m!(\Q$TEXMFHOME\E|\Q$TEXMFCONFIG\E)/web2c/updmap.cfg!) { $use_top = 1; last; } } if ($use_top) { ($changes_config_file) = @used_files; } else { # add the empty config file my $dn = "$TEXMFCONFIG/web2c"; $changes_config_file = "$dn/updmap.cfg"; } } if (!$opts{'quiet'}) { print "$prg is using the following updmap.cfg files (in precedence order):\n"; for my $f (@{$opts{'cnffile'}}) { print " $f\n"; } } if ($opts{'listfiles'}) { # we listed it above, so be done exit 0; } $alldata->{'changes_config'} = $changes_config_file; read_updmap_files(@{$opts{'cnffile'}}); if ($opts{'showoption'}) { for my $o (@{$opts{'showoption'}}) { if (defined($settings{$o})) { my ($v, $vo) = get_cfg($o); $v = "\"$v\"" if ($v =~ m/\s/); print "$o=$v ($vo)\n"; } else { printf STDERR "$prg: unknown option: $o\n"; } } exit 0; } if ($opts{'listmaps'}) { for my $m (keys %{$alldata->{'maps'}}) { my $origin = $alldata->{'maps'}{$m}{'origin'}; print $alldata->{'updmap'}{$origin}{'maps'}{$m}{'type'}, " $m ", $alldata->{'updmap'}{$origin}{'maps'}{$m}{'status'}, " in $origin\n"; } exit 0; } # we do changes always in the used config file with the highest # priority my $bakFile = $changes_config_file; $bakFile =~ s/\.cfg$/.bak/; my $changed = 0; if ($opts{'syncwithtrees'}) { my @missing = read_map_files(); if (@missing) { print "Missing map files found, disabling\n"; for my $m (@missing) { my $orig = $alldata->{'maps'}{$m}{'origin'}; print "\t$m (in $orig)\n"; } print "in $changes_config_file\n"; print "Do you really want to continue (y/N)? "; my $answer = ; $answer = "n" if !defined($answer); chomp($answer); print "answer =$answer=\n"; if ($answer ne "y" && $answer ne "Y") { print "Please fix manually before running updmap(-sys) again!\n"; exit 0; } $changed ||= enable_disable_maps(@missing); print "finished.\n"; # the original script did not run any update of the map files here, # should we do that? } exit 0; } $updLSR = &mktexupd(); $updLSR->{mustexist}(0); my $cmd; if ($opts{'edit'}) { if ($opts{"dry-run"}) { printf STDERR "No, are you joking, you want to edit with --dry-run?\n"; exit 1; } # it's not a good idea to edit updmap.cfg manually these days, # but for compatibility we'll silently keep the option. $cmd = 'edit'; my $editor = $ENV{'VISUAL'} || $ENV{'EDITOR'}; $editor ||= (&win32 ? "notepad" : "vi"); if (-r $changes_config_file) { ©File($changes_config_file, $bakFile); } else { touch($bakFile); touch($changes_config_file); } system($editor, $changes_config_file); $changed = files_are_different($bakFile, $changes_config_file); } elsif ($opts{'setoption'}) { $cmd = 'setOption'; $changed = setOptions (@{$opts{'setoption'}}); } elsif ($opts{'enable'} || $opts{'disable'}) { $cmd = 'enableMap'; $changed ||= enable_disable_maps(@{$opts{'enable'}}, @{$opts{'disable'}}); } if ($cmd && !$opts{'force'} && !$changed) { print "$changes_config_file unchanged. Map files not recreated.\n" if !$opts{'quiet'}; } else { if (!$opts{'nomkmap'}) { # before we continue we have to make sure that a newly created config # file is acually used. So we have to push the $changes_config_file # onto the list of available files. Since it is already properly # initialized and the merging is done later, all settings should be # honored my @aaa = @{$alldata->{'order'}}; unshift @aaa, $changes_config_file; $alldata->{'order'} = [ @aaa ]; # setupOutputDir("dvips"); setupOutputDir("pdftex"); setupOutputDir("dvipdfmx"); setupOutputDir("pxdvi"); my @missing = read_map_files(); if (@missing) { print STDERR "\nERROR: The following map file(s) couldn't be found:\n"; for my $m (@missing) { my $orig = $alldata->{'maps'}{$m}{'origin'}; print STDERR "\t$m (in $orig)\n"; } print STDERR "\n\tDid you run mktexlsr?\n\n" . "\tYou can disable non-existent map entries using the option\n". "\t --syncwithtrees.\n\n"; exit 1; } merge_data(); # for inspecting the output #print STDERR Data::Dumper->Dump([$alldata], [qw(mapdata)]); #print Dumper($alldata); mkMaps(); } unlink ($bakFile) if (-r $bakFile); } if (!$opts{'nohash'}) { print "$prg: Updating ls-R files.\n" if !$opts{'quiet'}; $updLSR->{exec}() unless $opts{"dry-run"}; } return 0; } ################################################################## # # sub getFonts { my ($first, @rest) = @_; my $getall = 0; my @maps = (); return if !defined($first); if ($first eq "-all") { $getall = 1; @maps = @rest; } else { @maps = ($first, @rest); } my @lines = (); for my $m (@maps) { if (defined($alldata->{'maps'}{$m})) { print LOG "\n" . $alldata->{'maps'}{$m}{'fullpath'} . ":\n" unless $opts{'dry-run'}; push @lines, "% $m"; for my $k (sort keys %{$alldata->{'maps'}{$m}{'fonts'}}) { if ($getall || $alldata->{'fonts'}{$k}{'origin'} eq $m) { if (defined($alldata->{'maps'}{$m}{'fonts'}{$k})) { push @lines, "$k " . $alldata->{'maps'}{$m}{'fonts'}{$k}; } else { print "undefined fonts for $k in $m ?!?!?\n"; } print LOG "$k\n" unless $opts{'dry-run'}; } } } } chomp @lines; return @lines; } ############################################################################### # writeLines() # write the lines in $filename # sub writeLines { my ($fname, @lines) = @_; return if $opts{"dry-run"}; map { ($_ !~ m/\n$/ ? s/$/\n/ : $_ ) } @lines; open FILE, ">$fname" or die "$prg: can't write lines to $fname: $!"; print FILE @lines; close FILE; } ############################################################################### # to_pdftex() # if $pdftexStripEnc is set, strip "PS_Encoding_Name ReEncodeFont" # from map entries; they are ignored by pdftex. But since the sh # incarnation of updmap included them, and we want to minimize # differences, this is not done by default. # sub to_pdftex { my $pdftexStripEnc = 0; return @_ unless $pdftexStripEnc; my @in = @_; my @out; foreach my $line (@in) { if ($line =~ /^(.*\s+)(\S+\s+ReEncodeFont\s)(.*)/) { $line = "$1$3"; $line =~ s/\s+\"\s+\"\s+/ /; } push @out, $line; } return @out; } ############################################################################### # setupSymlinks() # set symlink for psfonts.map according to dvipsPreferOutline variable # sub setupSymlinks { my ($dvipsPreferOutline, $dvipsoutputdir, $pdftexDownloadBase14, $pdftexoutputdir) = @_; my $src; my %link; my @link; if ($dvipsPreferOutline eq "true") { $src = "psfonts_t1.map"; } else { $src = "psfonts_pk.map"; } unlink "$dvipsoutputdir/psfonts.map" unless $opts{"dry-run"}; push @link, &SymlinkOrCopy("$dvipsoutputdir", "$src", "psfonts.map"); if ($pdftexDownloadBase14 eq "true") { $src = "pdftex_dl14.map"; } else { $src = "pdftex_ndl14.map"; } unlink "$pdftexoutputdir/pdftex.map" unless $opts{"dry-run"}; push @link, &SymlinkOrCopy("$pdftexoutputdir", "$src", "pdftex.map"); %link = @link; return \%link; } ############################################################################### # SymlinkOrCopy(dir, src, dest) # create symlinks if possible, otherwise copy files # sub SymlinkOrCopy { my ($dir, $src, $dest) = @_; return ($src, $dest) if $opts{"dry-run"}; if (&win32 || $opts{'copy'}) { # always copy ©File("$dir/$src", "$dir/$dest"); } else { # symlink if supported by fs, copy otherwise system("cd \"$dir\" && ln -s $src $dest 2>/dev/null || " . "cp -p \"$dir/$src\" \"$dir/$dest\""); } # remember for "Files generated" in &mkMaps. return ($dest, $src); } ############################################################################### # transLW35(mode args ...) # transform fontname and filenames according to transformation specified # by mode. Possible values: # URW|URWkb|ADOBE|ADOBEkb # sub transLW35 { my ($mode, @lines) = @_; my @psADOBE = ( 's/ URWGothicL-Demi / AvantGarde-Demi /', 's/ URWGothicL-DemiObli / AvantGarde-DemiOblique /', 's/ URWGothicL-Book / AvantGarde-Book /', 's/ URWGothicL-BookObli / AvantGarde-BookOblique /', 's/ URWBookmanL-DemiBold / Bookman-Demi /', 's/ URWBookmanL-DemiBoldItal / Bookman-DemiItalic /', 's/ URWBookmanL-Ligh / Bookman-Light /', 's/ URWBookmanL-LighItal / Bookman-LightItalic /', 's/ NimbusMonL-Bold / Courier-Bold /', 's/ NimbusMonL-BoldObli / Courier-BoldOblique /', 's/ NimbusMonL-Regu / Courier /', 's/ NimbusMonL-ReguObli / Courier-Oblique /', 's/ NimbusSanL-Bold / Helvetica-Bold /', 's/ NimbusSanL-BoldCond / Helvetica-Narrow-Bold /', 's/ NimbusSanL-BoldItal / Helvetica-BoldOblique /', 's/ NimbusSanL-BoldCondItal / Helvetica-Narrow-BoldOblique /', 's/ NimbusSanL-Regu / Helvetica /', 's/ NimbusSanL-ReguCond / Helvetica-Narrow /', 's/ NimbusSanL-ReguItal / Helvetica-Oblique /', 's/ NimbusSanL-ReguCondItal / Helvetica-Narrow-Oblique /', 's/ CenturySchL-Bold / NewCenturySchlbk-Bold /', 's/ CenturySchL-BoldItal / NewCenturySchlbk-BoldItalic /', 's/ CenturySchL-Roma / NewCenturySchlbk-Roman /', 's/ CenturySchL-Ital / NewCenturySchlbk-Italic /', 's/ URWPalladioL-Bold / Palatino-Bold /', 's/ URWPalladioL-BoldItal / Palatino-BoldItalic /', 's/ URWPalladioL-Roma / Palatino-Roman /', 's/ URWPalladioL-Ital / Palatino-Italic /', 's/ StandardSymL / Symbol /', 's/ NimbusRomNo9L-Medi / Times-Bold /', 's/ NimbusRomNo9L-MediItal / Times-BoldItalic /', 's/ NimbusRomNo9L-Regu / Times-Roman /', 's/ NimbusRomNo9L-ReguItal / Times-Italic /', 's/ URWChanceryL-MediItal / ZapfChancery-MediumItalic /', 's/ Dingbats / ZapfDingbats /', ); my @fileADOBEkb = ( 's/\buagd8a.pfb\b/pagd8a.pfb/', 's/\buagdo8a.pfb\b/pagdo8a.pfb/', 's/\buagk8a.pfb\b/pagk8a.pfb/', 's/\buagko8a.pfb\b/pagko8a.pfb/', 's/\bubkd8a.pfb\b/pbkd8a.pfb/', 's/\bubkdi8a.pfb\b/pbkdi8a.pfb/', 's/\bubkl8a.pfb\b/pbkl8a.pfb/', 's/\bubkli8a.pfb\b/pbkli8a.pfb/', 's/\bucrb8a.pfb\b/pcrb8a.pfb/', 's/\bucrbo8a.pfb\b/pcrbo8a.pfb/', 's/\bucrr8a.pfb\b/pcrr8a.pfb/', 's/\bucrro8a.pfb\b/pcrro8a.pfb/', 's/\buhvb8a.pfb\b/phvb8a.pfb/', 's/\buhvb8ac.pfb\b/phvb8an.pfb/', 's/\buhvbo8a.pfb\b/phvbo8a.pfb/', 's/\buhvbo8ac.pfb\b/phvbo8an.pfb/', 's/\buhvr8a.pfb\b/phvr8a.pfb/', 's/\buhvr8ac.pfb\b/phvr8an.pfb/', 's/\buhvro8a.pfb\b/phvro8a.pfb/', 's/\buhvro8ac.pfb\b/phvro8an.pfb/', 's/\buncb8a.pfb\b/pncb8a.pfb/', 's/\buncbi8a.pfb\b/pncbi8a.pfb/', 's/\buncr8a.pfb\b/pncr8a.pfb/', 's/\buncri8a.pfb\b/pncri8a.pfb/', 's/\buplb8a.pfb\b/pplb8a.pfb/', 's/\buplbi8a.pfb\b/pplbi8a.pfb/', 's/\buplr8a.pfb\b/pplr8a.pfb/', 's/\buplri8a.pfb\b/pplri8a.pfb/', 's/\busyr.pfb\b/psyr.pfb/', 's/\butmb8a.pfb\b/ptmb8a.pfb/', 's/\butmbi8a.pfb\b/ptmbi8a.pfb/', 's/\butmr8a.pfb\b/ptmr8a.pfb/', 's/\butmri8a.pfb\b/ptmri8a.pfb/', 's/\buzcmi8a.pfb\b/pzcmi8a.pfb/', 's/\buzdr.pfb\b/pzdr.pfb/', ); my @fileURW = ( 's/\buagd8a.pfb\b/a010015l.pfb/', 's/\buagdo8a.pfb\b/a010035l.pfb/', 's/\buagk8a.pfb\b/a010013l.pfb/', 's/\buagko8a.pfb\b/a010033l.pfb/', 's/\bubkd8a.pfb\b/b018015l.pfb/', 's/\bubkdi8a.pfb\b/b018035l.pfb/', 's/\bubkl8a.pfb\b/b018012l.pfb/', 's/\bubkli8a.pfb\b/b018032l.pfb/', 's/\bucrb8a.pfb\b/n022004l.pfb/', 's/\bucrbo8a.pfb\b/n022024l.pfb/', 's/\bucrr8a.pfb\b/n022003l.pfb/', 's/\bucrro8a.pfb\b/n022023l.pfb/', 's/\buhvb8a.pfb\b/n019004l.pfb/', 's/\buhvb8ac.pfb\b/n019044l.pfb/', 's/\buhvbo8a.pfb\b/n019024l.pfb/', 's/\buhvbo8ac.pfb\b/n019064l.pfb/', 's/\buhvr8a.pfb\b/n019003l.pfb/', 's/\buhvr8ac.pfb\b/n019043l.pfb/', 's/\buhvro8a.pfb\b/n019023l.pfb/', 's/\buhvro8ac.pfb\b/n019063l.pfb/', 's/\buncb8a.pfb\b/c059016l.pfb/', 's/\buncbi8a.pfb\b/c059036l.pfb/', 's/\buncr8a.pfb\b/c059013l.pfb/', 's/\buncri8a.pfb\b/c059033l.pfb/', 's/\buplb8a.pfb\b/p052004l.pfb/', 's/\buplbi8a.pfb\b/p052024l.pfb/', 's/\buplr8a.pfb\b/p052003l.pfb/', 's/\buplri8a.pfb\b/p052023l.pfb/', 's/\busyr.pfb\b/s050000l.pfb/', 's/\butmb8a.pfb\b/n021004l.pfb/', 's/\butmbi8a.pfb\b/n021024l.pfb/', 's/\butmr8a.pfb\b/n021003l.pfb/', 's/\butmri8a.pfb\b/n021023l.pfb/', 's/\buzcmi8a.pfb\b/z003034l.pfb/', 's/\buzdr.pfb\b/d050000l.pfb/', ); my @fileADOBE = ( 's/\buagd8a.pfb\b/agd_____.pfb/', 's/\buagdo8a.pfb\b/agdo____.pfb/', 's/\buagk8a.pfb\b/agw_____.pfb/', 's/\buagko8a.pfb\b/agwo____.pfb/', 's/\bubkd8a.pfb\b/bkd_____.pfb/', 's/\bubkdi8a.pfb\b/bkdi____.pfb/', 's/\bubkl8a.pfb\b/bkl_____.pfb/', 's/\bubkli8a.pfb\b/bkli____.pfb/', 's/\bucrb8a.pfb\b/cob_____.pfb/', 's/\bucrbo8a.pfb\b/cobo____.pfb/', 's/\bucrr8a.pfb\b/com_____.pfb/', 's/\bucrro8a.pfb\b/coo_____.pfb/', 's/\buhvb8a.pfb\b/hvb_____.pfb/', 's/\buhvb8ac.pfb\b/hvnb____.pfb/', 's/\buhvbo8a.pfb\b/hvbo____.pfb/', 's/\buhvbo8ac.pfb\b/hvnbo___.pfb/', 's/\buhvr8a.pfb\b/hv______.pfb/', 's/\buhvr8ac.pfb\b/hvn_____.pfb/', 's/\buhvro8a.pfb\b/hvo_____.pfb/', 's/\buhvro8ac.pfb\b/hvno____.pfb/', 's/\buncb8a.pfb\b/ncb_____.pfb/', 's/\buncbi8a.pfb\b/ncbi____.pfb/', 's/\buncr8a.pfb\b/ncr_____.pfb/', 's/\buncri8a.pfb\b/nci_____.pfb/', 's/\buplb8a.pfb\b/pob_____.pfb/', 's/\buplbi8a.pfb\b/pobi____.pfb/', 's/\buplr8a.pfb\b/por_____.pfb/', 's/\buplri8a.pfb\b/poi_____.pfb/', 's/\busyr.pfb\b/sy______.pfb/', 's/\butmb8a.pfb\b/tib_____.pfb/', 's/\butmbi8a.pfb\b/tibi____.pfb/', 's/\butmr8a.pfb\b/tir_____.pfb/', 's/\butmri8a.pfb\b/tii_____.pfb/', 's/\buzcmi8a.pfb\b/zcmi____.pfb/', 's/\buzdr.pfb\b/zd______.pfb/', ); if ($mode eq "" || $mode eq "URWkb") { # do nothing } elsif ($mode eq "URW") { for my $r (@fileURW) { map { eval($r); } @lines; } } elsif ($mode eq "ADOBE" || $mode eq "ADOBEkb") { for my $r (@psADOBE) { map { eval($r); } @lines; } my @filemode = eval ("\@file" . $mode); for my $r (@filemode) { map { eval($r); } @lines; } } return @lines; } ############################################################################### # cidx2dvips() # reads from stdin, writes to stdout. It transforms "cid-x"-like syntax into # "dvips"-like syntax. ############################################################################### sub cidx2dvips { my ($s) = @_; my @d; foreach (@$s) { if (m/^%/) { push(@d, $_); next; } s/,BoldItalic/ -s .3/; s/,Bold//; s/,Italic/ -s .3/; s/\s\s*/ /g; if ($_ =~ /.*[@\:\/,]/) {next;} elsif ($_ =~ /^[^ ][^ ]* unicode /) {next;} s/^([^ ][^ ]* [^ ][^ ]* [^ ][^ ]*)\.[Oo][Tt][Ff]/$1/; s/^([^ ][^ ]* [^ ][^ ]* [^ ][^ ]*)\.[Tt][Tt][FfCc]/$1/; s/$/ %/; s/^(([^ ]*).*)/$1$2/; s/^([^ ][^ ]* ([^ ][^ ]*) !*([^ ][^ ]*).*)/$1 $3-$2/; s/^(.* -e ([.0-9-][.0-9-]*).*)/$1 "$2 ExtendFont"/; s/^(.* -s ([.0-9-][.0-9-]*).*)/$1 "$2 SlantFont"/; s/.*%//; push(@d, $_); } return @d } sub get_cfg { my ($v) = @_; if (defined($alldata->{'merged'}{'setting'}{$v})) { return ( $alldata->{'merged'}{'setting'}{$v}{'val'}, $alldata->{'merged'}{'setting'}{$v}{'origin'} ); } else { return ($settings{$v}{'default'}, "default"); } } sub mkMaps { my $logfile; $logfile = "$TEXMFVAR/web2c/updmap.log"; if (! $opts{'dry-run'}) { mkdirhier("$TEXMFVAR/web2c"); open LOG, ">$logfile" or die "$prg: Can't open log file \"$logfile\": $!"; print LOG &version(); printf LOG "%s\n\n", scalar localtime(); print LOG "Using the following config files:\n"; for (@{$opts{'cnffile'}}) { print LOG " $_\n"; } } sub print_and_log { my $str=shift; print $str if !$opts{'quiet'}; print LOG $str unless $opts{'dry-run'}; } sub only_log { print LOG shift unless $opts{'dry-run'}; } my ($mode, $mode_origin) = get_cfg('LW35'); my ($dvipsPreferOutline, $dvipsPreferOutline_origin) = get_cfg('dvipsPreferOutline'); my ($dvipsDownloadBase35, $dvipsDownloadBase35_origin) = get_cfg('dvipsDownloadBase35'); my ($pdftexDownloadBase14, $pdftexDownloadBase14_origin) = get_cfg('pdftexDownloadBase14'); my ($pxdviUse, $pxdviUse_origin) = get_cfg('pxdviUse'); my ($kanjiEmbed, $kanjiEmbed_origin) = get_cfg('kanjiEmbed'); my ($kanjiVariant, $kanjiVariant_origin) = get_cfg('kanjiVariant'); print_and_log ("\n$prg is creating new map files" . "\nusing the following configuration:" . "\n LW35 font names : " . "$mode ($mode_origin)" . "\n prefer outlines : " . "$dvipsPreferOutline ($dvipsPreferOutline_origin)" . "\n texhash enabled : " . ($opts{'nohash'} ? "false" : "true") . "\n download standard fonts (dvips) : " . "$dvipsDownloadBase35 ($dvipsDownloadBase35_origin)" . "\n download standard fonts (pdftex) : " . "$pdftexDownloadBase14 ($pdftexDownloadBase14_origin)" . "\n kanjiEmbed replacement string : " . "$kanjiEmbed ($kanjiEmbed_origin)" . "\n kanjiVariant replacement string : " . "$kanjiVariant ($kanjiVariant_origin)" . "\n create a mapfile for pxdvi : " . "$pxdviUse ($pxdviUse_origin)" . "\n\n"); print_and_log ("Scanning for LW35 support files"); my $dvips35 = $alldata->{'maps'}{"dvips35.map"}{'fullpath'}; my $pdftex35 = $alldata->{'maps'}{"pdftex35.map"}{'fullpath'}; my $ps2pk35 = $alldata->{'maps'}{"ps2pk35.map"}{'fullpath'}; my $LW35 = "\n$dvips35\n$pdftex35\n$ps2pk35\n\n"; only_log ("\n"); only_log ($LW35); print_and_log (" [ 3 files]\n"); only_log ("\n"); print_and_log ("Scanning for MixedMap entries"); my @mixedmaps; my @notmixedmaps; my @kanjimaps; for my $m (keys %{$alldata->{'maps'}}) { my $origin = $alldata->{'maps'}{$m}{'origin'}; next if !defined($origin); next if ($alldata->{'updmap'}{$origin}{'maps'}{$m}{'status'} eq "disabled"); push @mixedmaps, $m if ($alldata->{'updmap'}{$origin}{'maps'}{$m}{'type'} eq "MixedMap"); push @notmixedmaps, $m if ($alldata->{'updmap'}{$origin}{'maps'}{$m}{'type'} eq "Map"); push @kanjimaps, $m if ($alldata->{'updmap'}{$origin}{'maps'}{$m}{'type'} eq "KanjiMap"); } @mixedmaps = sort @mixedmaps; @notmixedmaps = sort @notmixedmaps; @kanjimaps = sort @kanjimaps; only_log("\n"); foreach my $m (sort @mixedmaps) { if (defined($alldata->{'maps'}{$m}{'fullpath'})) { only_log($alldata->{'maps'}{$m}{'fullpath'} . "\n"); } else { only_log("$m (full path not set?)\n"); } } only_log("\n"); print_and_log (sprintf(" [%3d files]\n", scalar @mixedmaps)); only_log("\n"); print_and_log ("Scanning for KanjiMap entries"); only_log("\n"); foreach my $m (@kanjimaps) { if (defined($alldata->{'maps'}{$m}{'fullpath'})) { only_log($alldata->{'maps'}{$m}{'fullpath'} . "\n"); } else { only_log("$m (full path not set?)\n"); } } only_log("\n"); print_and_log (sprintf(" [%3d files]\n", scalar @kanjimaps)); only_log("\n"); print_and_log ("Scanning for Map entries"); only_log("\n"); foreach my $m (@notmixedmaps) { if (defined($alldata->{'maps'}{$m}{'fullpath'})) { only_log($alldata->{'maps'}{$m}{'fullpath'} . "\n"); } else { only_log("$m (full path not set?)\n"); } } only_log("\n"); print_and_log (sprintf(" [%3d files]\n\n", scalar @notmixedmaps)); only_log("\n"); # Create psfonts_t1.map, psfonts_pk.map, ps2pk.map and pdftex.map: my $dvipsoutputdir = $opts{'dvipsoutputdir'}; my $pdftexoutputdir = $opts{'pdftexoutputdir'}; my $dvipdfmxoutputdir = $opts{'dvipdfmxoutputdir'}; my $pxdvioutputdir = $opts{'pxdvioutputdir'}; if (!$opts{'dry-run'}) { my @managed_files = ("$dvipsoutputdir/download35.map", "$dvipsoutputdir/builtin35.map", "$dvipsoutputdir/psfonts_t1.map", "$dvipsoutputdir/psfonts_pk.map", "$pdftexoutputdir/pdftex_dl14.map", "$pdftexoutputdir/pdftex_ndl14.map", "$dvipdfmxoutputdir/kanjix.map", "$dvipsoutputdir/ps2pk.map"); push @managed_files, "$pxdvioutputdir/xdvi-ptex.map" if ($pxdviUse eq "true"); for my $file (@managed_files) { open FILE, ">$file"; print FILE "% $file:\ % maintained by updmap[-sys] (multi).\ % Don't change this file directly. Use updmap[-sys] instead.\ % See the updmap documentation.\ % A log of the run that created this file is available here:\ % $logfile\ "; close FILE; } } my @kanjimaps_fonts = getFonts(@kanjimaps); @kanjimaps_fonts = &normalizeLines(@kanjimaps_fonts); my @ps2pk_fonts = getFonts('-all', "ps2pk35.map"); my @dvips35_fonts = getFonts('-all', "dvips35.map"); my @pdftex35_fonts = getFonts('-all', "pdftex35.map"); my @mixedmaps_fonts = getFonts(@mixedmaps); my @notmixedmaps_fonts = getFonts(@notmixedmaps); print "Generating output for dvipdfmx...\n" if !$opts{'quiet'}; &writeLines(">$dvipdfmxoutputdir/kanjix.map", @kanjimaps_fonts); if ($pxdviUse eq "true") { # we use the very same data as for kanjix.map, but generate # a different file, so that in case a user wants to hand-craft it print "Generating output for pxdvi...\n" if !$opts{'quiet'}; &writeLines(">$pxdvioutputdir/xdvi-ptex.map", @kanjimaps_fonts); } print "Generating output for ps2pk...\n" if !$opts{'quiet'}; my @ps2pk_map; push @ps2pk_map, "% ps2pk35.map"; push @ps2pk_map, transLW35($mode, @ps2pk_fonts); push @ps2pk_map, @mixedmaps_fonts; push @ps2pk_map, @notmixedmaps_fonts; &writeLines(">$dvipsoutputdir/ps2pk.map", normalizeLines(@ps2pk_map)); print "Generating output for dvips...\n" if !$opts{'quiet'}; my @download35_map; push @download35_map, "% ps2pk35.map"; push @download35_map, transLW35($mode, @ps2pk_fonts); &writeLines(">$dvipsoutputdir/download35.map", normalizeLines(@download35_map)); my @builtin35_map; push @builtin35_map, "% dvips35.map"; push @builtin35_map, transLW35($mode, @dvips35_fonts); &writeLines(">$dvipsoutputdir/builtin35.map", normalizeLines(@builtin35_map)); my @dftdvips_fonts = ($dvipsDownloadBase35 ? @ps2pk_fonts : @dvips35_fonts); my @psfonts_t1_map; if ($dvipsDownloadBase35) { push @psfonts_t1_map, "% ps2pk35.map", @dftdvips_fonts = @ps2pk_fonts; } else { push @psfonts_t1_map, "% dvips35.map"; @dftdvips_fonts = @dvips35_fonts; } push @psfonts_t1_map, transLW35($mode, @dftdvips_fonts); my @tmpkanji2 = cidx2dvips(\@kanjimaps_fonts); push @psfonts_t1_map, @mixedmaps_fonts; push @psfonts_t1_map, @notmixedmaps_fonts; push @psfonts_t1_map, @tmpkanji2; &writeLines(">$dvipsoutputdir/psfonts_t1.map", normalizeLines(@psfonts_t1_map)); my @psfonts_pk_map; push @psfonts_pk_map, transLW35($mode, @dftdvips_fonts); push @psfonts_pk_map, @notmixedmaps_fonts; push @psfonts_pk_map, @tmpkanji2; &writeLines(">$dvipsoutputdir/psfonts_pk.map", normalizeLines(@psfonts_pk_map)); print "Generating output for pdftex...\n" if !$opts{'quiet'}; # remove PaintType due to Sebastian's request my @pdftexmaps_ndl; push @pdftexmaps_ndl, "% pdftex35.map"; push @pdftexmaps_ndl, transLW35($mode, @pdftex35_fonts); push @pdftexmaps_ndl, @mixedmaps_fonts; push @pdftexmaps_ndl, @notmixedmaps_fonts; @pdftexmaps_ndl = grep { $_ !~ m/(^%\|PaintType)/ } @pdftexmaps_ndl; my @pdftexmaps_dl; push @pdftexmaps_dl, "% ps2pk35.map"; push @pdftexmaps_dl, transLW35($mode, @ps2pk_fonts); push @pdftexmaps_dl, @mixedmaps_fonts; push @pdftexmaps_dl, @notmixedmaps_fonts; @pdftexmaps_dl = grep { $_ !~ m/(^%\|PaintType)/ } @pdftexmaps_dl; my @pdftex_ndl14_map = @pdftexmaps_ndl; @pdftex_ndl14_map = &normalizeLines(@pdftex_ndl14_map); @pdftex_ndl14_map = &to_pdftex(@pdftex_ndl14_map); &writeLines(">$pdftexoutputdir/pdftex_ndl14.map", @pdftex_ndl14_map); my @pdftex_dl14_map = @pdftexmaps_dl; @pdftex_dl14_map = &normalizeLines(@pdftex_dl14_map); @pdftex_dl14_map = &to_pdftex(@pdftex_dl14_map); &writeLines(">$pdftexoutputdir/pdftex_dl14.map", @pdftex_dl14_map); our $link = &setupSymlinks($dvipsPreferOutline, $dvipsoutputdir, $pdftexDownloadBase14, $pdftexoutputdir); print_and_log ("\nFiles generated:\n"); sub dir { my ($d, $f, $target)=@_; our $link; if (-e "$d/$f") { my @stat=lstat("$d/$f"); my ($s,$m,$h,$D,$M,$Y)=localtime($stat[9]); my $timestamp=sprintf ("%04d-%02d-%02d %02d:%02d:%02d", $Y+1900, $M+1, $D, $h, $m, $s); my $date=sprintf "%12d %s %s", $stat[7], $timestamp, $f; print_and_log ($date); if (-l "$d/$f") { my $lnk=sprintf " -> %s\n", readlink ("$d/$f"); print_and_log ($lnk); } elsif ($f eq $target) { if (&files_are_identical("$d/$f", "$d/" . $link->{$target})) { print_and_log (" = $link->{$target}\n"); } else { print_and_log (" = ?????\n"); # This shouldn't happen. } } else { print_and_log ("\n"); } } else { print STDERR "Warning: File $d/$f doesn't exist.\n"; print LOG "Warning: File $d/$f doesn't exist.\n" unless $opts{'dry-run'}; } } my $d; $d = "$dvipsoutputdir"; print_and_log(" $d:\n"); foreach my $f ('builtin35.map', 'download35.map', 'psfonts_pk.map', 'psfonts_t1.map', 'ps2pk.map', 'psfonts.map') { dir ($d, $f, 'psfonts.map'); $updLSR->{add}("$d/$f") unless $opts{'dry-run'}; } $d = "$pdftexoutputdir"; print_and_log(" $d:\n"); foreach my $f ('pdftex_dl14.map', 'pdftex_ndl14.map', 'pdftex.map') { dir ($d, $f, 'pdftex.map'); $updLSR->{add}("$d/$f") unless $opts{'dry-run'}; } $d="$dvipdfmxoutputdir"; print_and_log(" $d:\n"); foreach my $f ('kanjix.map') { dir ($d, $f, ''); $updLSR->{add}("$d/$f") unless $opts{'dry-run'}; } if ($pxdviUse eq "true") { $d="$pxdvioutputdir"; print_and_log(" $d:\n"); foreach my $f ('xdvi-ptex.map') { dir ($d, $f, ''); $updLSR->{add}("$d/$f") unless $opts{'dry-run'}; } } close LOG unless $opts{'dry-run'}; print "\nTranscript written on \"$logfile\".\n" if !$opts{'quiet'}; } sub locateMap { my $map = shift; my $ret = `kpsewhich --format=map $map`; chomp($ret); return $ret; } sub processOptions { # first process the stupid setoption= s@{1,2} which is not accepted # furthermore, try to work around missing s{1,2} support in older perls my $oldconfig = Getopt::Long::Configure(qw(pass_through)); our @setoptions; our @enable; sub read_one_or_two { my ($opt, $val) = @_; our @setoptions; our @enable; # check if = occirs in $val, if not, get the next argument if ($val =~ m/=/) { if ($opt eq "setoption") { push @setoptions, $val; } else { push @enable, $val; } } else { my $vv = shift @ARGV; die "Try \"$prg --help\" for more information.\n" if !defined($vv); if ($opt eq "setoption") { push @setoptions, "$val=$vv"; } else { push @enable, "$val=$vv"; } } } GetOptions("setoption=s@" => \&read_one_or_two, "enable=s@" => \&read_one_or_two) or die "Try \"$prg --help\" for more information.\n"; @{$opts{'setoption'}} = @setoptions if (@setoptions); @{$opts{'enable'}} = @enable if (@enable); Getopt::Long::Configure($oldconfig); # now continue with normal option handling GetOptions(\%opts, @cmdline_options) or die "Try \"$prg --help\" for more information.\n"; } # determines the output dir for driver from cmd line, or if not given # from TEXMFVAR sub setupOutputDir { my $driver = shift; if (!$opts{$driver . "outputdir"}) { if ($opts{'outputdir'}) { $opts{$driver . "outputdir"} = $opts{'outputdir'}; } else { $opts{$driver . "outputdir"} = "$TEXMFVAR/fonts/map/$driver/updmap"; } } my $od = $opts{$driver . "outputdir"}; if (!$opts{"dry-run"}) { &mkdirhier($od); if (! -w $od) { die "$prg: Directory \"$od\" isn't writable: $!"; } } print "$driver output dir: \"$od\"\n" if !$opts{'quiet'}; return $od; } ############################################################################### # setOption (@options) # parse @options for "key=value" (one element of @options) # we can only have "key=value" since that is the way it was prepared # in process_options # (These were the values provided to --setoption.) # sub setOptions { my (@options) = @_; for (my $i = 0; $i < @options; $i++) { my $o = $options[$i]; my ($key,$val) = split (/=/, $o, 2); die "$prg: unexpected empty key or val for options (@options), goodbye.\n" if !$key || !defined($val); &setOption ($key, $val); } return save_updmap($alldata->{'changes_config'}); } sub enable_disable_maps { my (@what) = @_; my $tc = $alldata->{'changes_config'}; die "$prg: top config file $tc has not been read." if (!defined($alldata->{'updmap'}{$tc})); my $changed = 0; for my $w (@what) { if ($w =~ m/=/) { # this is --enable MapType=MapName my ($type, $map) = split ('=', $w); enable_map($tc, $type, $map); } else { # this is --disable MapName disable_map($tc, $w); } } merge_settings(); return save_updmap($tc); } sub enable_map { my ($tc, $type, $map) = @_; die "$prg: invalid mapType $type" if ($type !~ m/^(Map|MixedMap|KanjiMap)$/); if (defined($alldata->{'updmap'}{$tc}{'maps'}{$map})) { # the map data has already been read in, no special precautions necessary if (($alldata->{'updmap'}{$tc}{'maps'}{$map}{'status'} eq "enabled") && ($alldata->{'updmap'}{$tc}{'maps'}{$map}{'type'} eq $type)) { # nothing to do here ... be happy! return; } else { $alldata->{'updmap'}{$tc}{'maps'}{$map}{'status'} = "enabled"; $alldata->{'updmap'}{$tc}{'maps'}{$map}{'type'} = $type; $alldata->{'maps'}{$map}{'origin'} = $tc; $alldata->{'maps'}{$map}{'status'} = "enabled"; $alldata->{'updmap'}{$tc}{'changed'} = 1; } } else { # add a new map file! $alldata->{'updmap'}{$tc}{'maps'}{$map}{'type'} = $type; $alldata->{'updmap'}{$tc}{'maps'}{$map}{'status'} = "enabled"; $alldata->{'updmap'}{$tc}{'maps'}{$map}{'line'} = -1; $alldata->{'updmap'}{$tc}{'changed'} = 1; $alldata->{'maps'}{$map}{'origin'} = $tc; $alldata->{'maps'}{$map}{'status'} = "enabled"; } } sub disable_map { my ($tc, $map) = @_; if (defined($alldata->{'updmap'}{$tc}{'maps'}{$map})) { # the map data has already been read in, no special precautions necessary if ($alldata->{'updmap'}{$tc}{'maps'}{$map}{'status'} eq "disabled") { # nothing to do here ... be happy! } else { $alldata->{'updmap'}{$tc}{'maps'}{$map}{'status'} = "disabled"; $alldata->{'maps'}{$map}{'origin'} = $tc; $alldata->{'maps'}{$map}{'status'} = "disabled"; $alldata->{'updmap'}{$tc}{'changed'} = 1; } } else { # disable a Map type that might be activated in a lower ranked updmap.cfg if (!defined($alldata->{'maps'}{$map})) { warning("Map is not present anywhere, why should I disable it?\n"); return; } my $orig = $alldata->{'maps'}{$map}{'origin'}; # add a new entry to the top level where we disable it # copy over the type from the last entry $alldata->{'updmap'}{$tc}{'maps'}{$map}{'type'} = $alldata->{'updmap'}{$orig}{'maps'}{$map}{'type'}; $alldata->{'updmap'}{$tc}{'maps'}{$map}{'status'} = "disabled"; $alldata->{'updmap'}{$tc}{'maps'}{$map}{'line'} = -1; # rewrite the origin $alldata->{'maps'}{$map}{'origin'} = $tc; $alldata->{'maps'}{$map}{'status'} = "disabled"; # go on for writing $alldata->{'updmap'}{$tc}{'changed'} = 1; } } # returns 1 if actually saved due to changes sub save_updmap { my $fn = shift; return if $opts{'dry-run'}; my %upd = %{$alldata->{'updmap'}{$fn}}; if ($upd{'changed'}) { mkdirhier(dirname($fn)); open (FN, ">$fn") || die "$prg: can't write to $fn: $!"; my @lines = @{$upd{'lines'}}; if (!@lines) { print "Creating new config file $fn\n"; # update lsR database $updLSR->{add}($fn); $updLSR->{exec}(); # reset the LSR stuff, otherwise we add files several times $updLSR->{reset}(); } # collect the lines with data my %line_to_setting; my %line_to_map; my @add_setting; my @add_map; if (defined($upd{'setting'})) { for my $k (keys %{$upd{'setting'}}) { if ($upd{'setting'}{$k}{'line'} == -1) { push @add_setting, $k; } else { $line_to_setting{$upd{'setting'}{$k}{'line'}} = $k; } } } if (defined($upd{'maps'})) { for my $k (keys %{$upd{'maps'}}) { if ($upd{'maps'}{$k}{'line'} == -1) { push @add_map, $k; } else { $line_to_map{$upd{'maps'}{$k}{'line'}} = $k; } } } for my $i (0..$#lines) { if (defined($line_to_setting{$i})) { my $k = $line_to_setting{$i}; my $v = $upd{'setting'}{$k}{'val'}; print FN "$k $v\n"; } elsif (defined($line_to_map{$i})) { my $m = $line_to_map{$i}; my $rm; if (defined($upd{'maps'}{$m}{'original'})) { # we have the case that @noEmbed@ was replaced by the respective # setting. Before writing out we have to replace this back with # the original line!A $rm = $upd{'maps'}{$m}{'original'}; } else { $rm = $m; } my $t = $upd{'maps'}{$m}{'type'}; my $p = ($upd{'maps'}{$m}{'status'} eq "disabled" ? "#! " : ""); print FN "$p$t $rm\n"; } else { print FN "$lines[$i]\n"; } } # add the new settings and maps for my $k (@add_setting) { my $v = $upd{'setting'}{$k}{'val'}; print FN "$k $v\n"; } for my $m (@add_map) { my $t = $upd{'maps'}{$m}{'type'}; my $p = ($upd{'maps'}{$m}{'status'} eq "disabled" ? "#! " : ""); print FN "$p$t $m\n"; } close(FN) || warn("Cannot close file handle for $fn: $!"); delete $alldata->{'updmap'}{$fn}{'changed'}; return 1; } return 0; } ###################### # check for correct option value # sub check_option { my ($opt, $val) = @_; if ((($settings{$opt}{'type'} eq "binary") && $val ne "true" && $val ne "false") || (($settings{$opt}{'type'} eq "string") && !member($val, @{$settings{$opt}{'possible'}}))) { return 0; } return 1; } ############################################################################### # setOption (conf_file, option, value) # sets option to value in the config file (replacing the existing setting # or by adding a new line to the config file). # sub setOption { my ($opt, $val) = @_; die "$prg: Unsupported option $opt." if (!defined($settings{$opt})); die "$0: Invalid value $val for option $opt." if (!check_option($opt, $val)); # silently accept this old option name, just in case. return if $opt eq "dvipdfmDownloadBase14"; #print "Setting option $opt to $val...\n" if !$opts{'quiet'}; my $tc = $alldata->{'changes_config'}; die "$prg: top config file $tc has not been read." if (!defined($alldata->{'updmap'}{$tc})); if (defined($alldata->{'updmap'}{$tc}{'setting'}{$opt}{'val'})) { # the value is already set, do nothing if ($alldata->{'updmap'}{$tc}{'setting'}{$opt}{'val'} eq $val) { return; } $alldata->{'updmap'}{$tc}{'setting'}{$opt}{'val'} = $val; $alldata->{'updmap'}{$tc}{'changed'} = 1; } else { $alldata->{'updmap'}{$tc}{'setting'}{$opt}{'val'} = $val; $alldata->{'updmap'}{$tc}{'setting'}{$opt}{'line'} = -1; $alldata->{'updmap'}{$tc}{'changed'} = 1; } } ############################################################################### # copyFile() # copy file $src to $dst, sets $dst creation and mod time # sub copyFile { my ($src, $dst) = @_; my $dir; ($dir=$dst)=~s/(.*)\/.*/$1/; mkdirhier($dir); $src eq $dst && return "can't copy $src to itself!\n"; open IN, "<$src" or die "$0: can't open source file $src for copying: $!"; open OUT, ">$dst"; binmode(IN); binmode(OUT); print OUT ; close(OUT); close(IN); my @t = stat($src); utime($t[8], $t[9], $dst); } ############################################################################### # files_are_identical(file_A, file_B) # compare two files. Same as cmp(1). # sub files_are_identical { my $file_A=shift; my $file_B=shift; my $retval=0; open IN, "$file_A"; my $A=(); close IN; open IN, "$file_B"; my $B=(); close IN; $retval=1 if ($A eq $B); return $retval; } ############################################################################### # files_are_different(file_A, file_B[, comment_char]) # compare two equalized files. # sub files_are_different { my $file_A=shift; my $file_B=shift; my $comment=shift; my $retval=0; my $A=equalize_file("$file_A", $comment); my $B=equalize_file("$file_B", $comment); $retval=1 unless ($A eq $B); return $retval; } ############################################################################### # equalize_file(filename[, comment_char]) # read a file and return its processed content as a string. # look into the source code for more details. # sub equalize_file { my $file=shift; my $comment=shift; my @temp; open IN, "$file"; my @lines = (); close IN; chomp(@lines); for (@lines) { s/\s*${comment}.*// if (defined $comment); # remove comments next if /^\s*$/; # remove empty lines s/\s+/ /g; # replace multiple whitespace chars by a single one push @temp, $_; } return join('X', sort(@temp)); } ############################################################################### # normalizeLines() # not the original function, we want it to keep comments, that are # anyway only the file names we are adding! # whitespace is exactly one space, no empty lines, # no whitespace at end of line, one space before and after " # sub normalizeLines { my @lines = @_; my %count = (); # @lines = grep { $_ !~ m/^[*#;%]/ } @lines; map {$_ =~ s/\s+/ /gx } @lines; @lines = grep { $_ !~ m/^\s*$/x } @lines; map { $_ =~ s/\s$//x ; $_ =~ s/\s*\"\s*/ \" /gx; $_ =~ s/\" ([^\"]*) \"/\"$1\"/gx; } @lines; # @lines = grep {++$count{$_} < 2 } (sort @lines); @lines = grep {++$count{$_} < 2 } (@lines); return @lines; } ################################################################# # # reading updmap-cfg files and the actual map files # # the following hash saves *all* the information and is passed around # we do not fill everything from the very beginning to make sure that # we only read what is necessary (speed!) # # initialized by main # $alldata->{'changes_config'} = the config file where changes are saved # # initialized by read_updmap_files # $alldata->{'order'} = [ list of updmap in decreasing priority ] # $alldata->{'updmap'}{$full_path_name_of_updmap}{'lines'} = \@lines # $alldata->{'updmap'}{$full_path_name_of_updmap}{'setting'}{$key}{'val'} = $val # $alldata->{'updmap'}{$full_path_name_of_updmap}{'setting'}{$key}{'line'} = $i # $alldata->{'updmap'}{$full_path_name_of_updmap}{'maps'}{$mapname}{'type'} # = 'Map'|'MixedMap'|'KanjiMap'|'disabled' # $alldata->{'updmap'}{$full_path_name_of_updmap}{'maps'}{$mapname}{'status'} # = 'enabled'|'disabled' # $alldata->{'updmap'}{$full_path_name_of_updmap}{'maps'}{$mapname}{'line'} = $i # $alldata->{'maps'}{$m}{'origin'} = $updmap_path_name # $alldata->{'maps'}{$m}{'status'} = enabled | disabled # # initialized by read_map_files # $alldata->{'maps'}{$m}{'fonts'}{$font} = $definition # $alldata->{'fonts'}{$f}{'origin'} = $map # # initialized by merge_data # $alldata->{'merged'}{'setting'}{$key}{'val'} = $val # $alldata->{'merged'}{'setting'}{$key}{'origin'} = $origin_updmap_cfg # $alldata->{'merged'}{'allMaps'}{'fonts'}{$fontdef} = $rest # $alldata->{'merged'}{'noMixedMaps'}{'fonts'}{$fontdef} = $rest # $alldata->{'merged'}{'KanjiMaps'}{'fonts'}{$fontdef} = $rest # sub read_updmap_files { my (@l) = @_; for my $l (@l) { my $updmap = read_updmap_file($l); $alldata->{'updmap'}{$l}{'lines'} = $updmap->{'lines'}; if (defined($updmap->{'setting'})) { for my $k (keys %{$updmap->{'setting'}}) { $alldata->{'updmap'}{$l}{'setting'}{$k}{'val'} = $updmap->{'setting'}{$k}{'val'}; $alldata->{'updmap'}{$l}{'setting'}{$k}{'line'} = $updmap->{'setting'}{$k}{'line'}; } } if (defined($updmap->{'maps'})) { for my $k (keys %{$updmap->{'maps'}}) { $alldata->{'updmap'}{$l}{'maps'}{$k}{'type'} = $updmap->{'maps'}{$k}{'type'}; $alldata->{'updmap'}{$l}{'maps'}{$k}{'status'} = $updmap->{'maps'}{$k}{'status'}; $alldata->{'updmap'}{$l}{'maps'}{$k}{'line'} = $updmap->{'maps'}{$k}{'line'}; } } } # in case the changes_config is a new one read it in and initialize it here my $cc = $alldata->{'changes_config'}; if (! -r $cc) { $alldata->{'updmap'}{$cc}{'lines'} = [ ]; } # $alldata->{'order'} = \@l; # merge data and check for kanji embed merge_settings(); } sub merge_settings { # my @l = @{$alldata->{'order'}}; # # for security clean out everything that was there %{$alldata->{'merged'}} = (); # # first read in the settings # we read it in *reverse* order and simple fill up the combined data # thus if there are multiple definitions/settings, the one coming from # the first in the original list will win! for my $l (reverse @l) { # merge settings if (defined($alldata->{'updmap'}{$l}{'setting'})) { for my $k (keys %{$alldata->{'updmap'}{$l}{'setting'}}) { $alldata->{'merged'}{'setting'}{$k}{'val'} = $alldata->{'updmap'}{$l}{'setting'}{$k}{'val'}; $alldata->{'merged'}{'setting'}{$k}{'origin'} = $l; } } } # my ($kanjiEmbed, $kanjiEmbed_origin) = get_cfg('kanjiEmbed'); my ($kanjiVariant, $kanjiVariant_origin) = get_cfg('kanjiVariant'); # # go through all map files and check that the text is properly replaced # after the replacement check that the generated map file actually # exists, we do NOT want to break in this case! # for my $l (@l) { for my $m (keys %{$alldata->{'updmap'}{$l}{'maps'}}) { if ($m =~ m/\@kanjiEmbed@/ || $m =~ m/\@kanjiVariant@/) { my $newm = $m; $newm =~ s/\@kanjiEmbed@/$kanjiEmbed/; $newm =~ s/\@kanjiVariant@/$kanjiVariant/; if (locateMap($newm)) { # now we have to update various linked items $alldata->{'updmap'}{$l}{'maps'}{$newm}{'type'} = $alldata->{'updmap'}{$l}{'maps'}{$m}{'type'}; $alldata->{'updmap'}{$l}{'maps'}{$newm}{'status'} = $alldata->{'updmap'}{$l}{'maps'}{$m}{'status'}; $alldata->{'updmap'}{$l}{'maps'}{$newm}{'line'} = $alldata->{'updmap'}{$l}{'maps'}{$m}{'line'}; $alldata->{'updmap'}{$l}{'maps'}{$newm}{'original'} = $m; } else { print "$prg: generated map $newm (from $m) does not exists, not activating it!\n"; } # in any case delete the @kanji...@ entry line, such a map will # never exist delete $alldata->{'updmap'}{$l}{'maps'}{$m}; } } } # # first round determine which maps should be used and which type, as # different updmap.cfg files might specify different types of maps # (MixedMap or Map or KanjiMap). # Again, we have to do that in reverse order for my $l (reverse @l) { if (defined($alldata->{'updmap'}{$l}{'maps'})) { for my $m (keys %{$alldata->{'updmap'}{$l}{'maps'}}) { $alldata->{'maps'}{$m}{'origin'} = $l; $alldata->{'maps'}{$m}{'status'} = $alldata->{'updmap'}{$l}{'maps'}{$m}{'status'}; } } } } sub read_updmap_file { my $fn = shift; my $is_old_local = ($fn =~ m/updmap-local.cfg/ ? 1 : 0); my %data; if (!open(FN,"<$fn")) { die ("Cannot read $fn: $!"); } # we count lines from 0 ..!!!! my $i = -1; my @lines = ; chomp(@lines); $data{'lines'} = [ @lines ]; close(FN) || warn("Cannot close $fn: $!"); for (@lines) { $i++; chomp; if ($is_old_local) { # in case we read an old updmap-local.cfg we have to make sure # that the disable lines # ^#!foo.map # are rewritten to proper disable lines # ^#! Map foo.map # we are guessing here the type of the map (namely Map) $_ =~ s/^#!([^ ])/#! Map $1/; } next if /^\s*$/; next if /^\s*#$/; next if /^\s*#[^!]/; next if /^\s*##/; next if /^#![^ ]/; # allow for commands on the line itself s/([^#].*)#.*$/$1/; my ($a, $b, @rest) = split ' '; # make sure we get empty strings as arguments $b = "" if (!defined($b)); if ($a eq "#!") { if ($b eq "Map" || $b eq "MixedMap" || $b eq "KanjiMap") { my $c = shift @rest; if (!defined($c)) { warning("$prg: apparently not a real disable line, ignored: $_\n"); } else { if (defined($data{'maps'}{$c})) { warning("$prg: double mention of $c in $fn\n"); } $data{'maps'}{$c}{'status'} = 'disabled'; $data{'maps'}{$c}{'type'} = $b; $data{'maps'}{$c}{'line'} = $i; } } next; } if (@rest) { warning("$prg: line $i in $fn contains a syntax error, more than two words!\n"); } if (defined($settings{$a})) { if (check_option($a, $b)) { $data{'setting'}{$a}{'val'} = $b; $data{'setting'}{$a}{'line'} = $i; } else { warning("$prg: unknown setting for $a: $b, ignored!\n"); } } elsif ($a eq "Map" || $a eq "MixedMap" || $a eq "KanjiMap") { if (defined($data{'maps'}{$b}) && $data{'maps'}{$b}{'type'} ne $a) { warning("$prg: double mention of $b with conflicting types in $fn\n"); } else { $data{'maps'}{$b}{'type'} = $a; $data{'maps'}{$b}{'status'} = 'enabled'; $data{'maps'}{$b}{'line'} = $i; } } else { warning("$prg: unrecognized line $i in $fn: $_\n"); } } return \%data; } sub read_map_files { if (!defined($alldata->{'updmap'})) { return; } my @missing; my @l = @{$alldata->{'order'}}; # first collect all the map files we are interested in # and determine whether they exist, and get their full path my @maps; for my $f (@l) { next if !defined($alldata->{'updmap'}{$f}{'maps'}); for my $m (keys %{$alldata->{'updmap'}{$f}{'maps'}}) { # only read a map file if its final status is enabled! push @maps, $m if ($alldata->{'maps'}{$m}{'status'} eq 'enabled'); } } for my $m (qw/dvips35.map pdftex35.map ps2pk35.map/) { push @maps, $m; $alldata->{'maps'}{$m}{'status'} = 'enabled'; } @maps = sort_uniq(@maps); my @fullpath = `kpsewhich --format=map @maps`; chomp @fullpath; foreach my $map (@maps) { my ($ff) = grep /\/$map(\.map)?$/, @fullpath; if ($ff) { $alldata->{'maps'}{$map}{'fullpath'} = $ff; } else { # if the map file is not found, then push it onto the list of # missing map files, since we know that it is enabled push @missing, $map; } } # # read in the three basic fonts definition maps for my $m (qw/dvips35.map pdftex35.map ps2pk35.map/) { my $ret = read_map_file($alldata->{'maps'}{$m}{'fullpath'}); my @ff = (); for my $font (keys %$ret) { $alldata->{'fonts'}{$font}{'origin'} = $m; $alldata->{'maps'}{$m}{'fonts'}{$font} = $ret->{$font}; } } # we read the updmap in reverse directions, since we # replace the origin field of font definition always with the # top one for my $f (reverse @l) { my @maps = keys %{$alldata->{'updmap'}{$f}{'maps'}}; for my $m (@maps) { # we do not read a map file multiple times, if $alldata{'maps'}{$m} is # defined we expect that it was read and do skip it next if defined($alldata->{'maps'}{$m}{'fonts'}); # we do not read a map files content if it is disabled next if ($alldata->{'maps'}{$m}{'status'} eq 'disabled'); if (!defined($alldata->{'maps'}{$m}{'fullpath'})) { # we have already pushed these map files onto the list of missing # map files, so do nothing here next; } my $ret = read_map_file($alldata->{'maps'}{$m}{'fullpath'}); if (defined($ret)) { for my $font (keys %$ret) { if (defined($alldata->{'fonts'}{$font})) { # we got another definition, warn on that # if the origin is not defined by now, the font is defined # multiple times in the same map file, otherwise it is # defined in another map file already if (defined($alldata->{'fonts'}{$font}{'origin'})) { my $fontorig = $alldata->{'fonts'}{$font}{'origin'}; my $maporig = $alldata->{'maps'}{$fontorig}{'origin'}; warning("$prg: font $font is defined multiple times:\n"); warning("$prg: $fontorig (from $maporig)\n"); warning("$prg: $m (from $f) (used)\n"); } else { warning("$prg: font $font is multiply defined in $m, using an arbitrary instance!\n"); } } $alldata->{'fonts'}{$font}{'origin'} = $m; $alldata->{'maps'}{$m}{'fonts'}{$font} = $ret->{$font}; } } } } return (@missing); } sub read_map_file { my $fn = shift; my @lines; if (!open(MF,"<$fn")) { warn("cannot open $fn: $!"); return; } @lines = ; close(MF); chomp(@lines); my %data; for (@lines) { next if /^\s*#/; next if /^\s*%/; next if /^\s*$/; my ($a, $b) = split(' ', $_, 2); $data{$a} = $b; } return \%data; } # # merging the various font definitions # sub merge_data { my @l = @{$alldata->{'order'}}; # # now merge the data # for my $m (keys %{$alldata->{'maps'}}) { my $origin = $alldata->{'maps'}{$m}{'origin'}; next if !defined($origin); next if ($alldata->{'updmap'}{$origin}{'maps'}{$m}{'status'} eq "disabled"); for my $f (keys %{$alldata->{'maps'}{$m}{'fonts'}}) { # use the font definition only for those fonts where the origin matches if ($alldata->{'fonts'}{$f}{'origin'} eq $m) { $alldata->{'merged'}{'allMaps'}{'fonts'}{$f} = $alldata->{'maps'}{$m}{'fonts'}{$f} if ($alldata->{'updmap'}{$origin}{'maps'}{$m}{'type'} ne "KanjiMap"); $alldata->{'merged'}{'noMixedMaps'}{'fonts'}{$f} = $alldata->{'maps'}{$m}{'fonts'}{$f} if ($alldata->{'updmap'}{$origin}{'maps'}{$m}{'type'} eq "Map"); $alldata->{'merged'}{'KanjiMap'}{'fonts'}{$f} = $alldata->{'maps'}{$m}{'fonts'}{$f} if ($alldata->{'updmap'}{$origin}{'maps'}{$m}{'type'} eq "KanjiMap"); } } } } # # $HOME and sudo and updmap-sys horror # some instances of sudo do not reset $HOME to the home of root # as an effect of "sudo updmap" creates root owned files in the home # of a normal user, and "sudo updmap-sys" uses map files and updmap.cfg # files from the directory of a normal user, but creating files # in TEXMFSYSCONFIG. This is *all* wrong. # we check: if we are running as UID 0 (root) on Unix and the # ENV{HOME} is NOT the same as the one of root, then give a warning # and reset it to the real home dir of root. sub reset_root_home { if (!win32() && ($> == 0)) { # $> is effective uid my $envhome = $ENV{'HOME'}; # if $HOME isn't an existing directory, we don't care. if (defined($envhome) && (-d $envhome)) { # we want to avoid calling getpwuid as far as possible, so if # $envhome is one of some usual values we accept it without worrying. if ($envhome =~ m,^(/|/root|/var/root)/*$,) { return; } # $HOME is defined, check what is the home of root in reality my (undef,undef,undef,undef,undef,undef,undef,$roothome) = getpwuid(0); if (defined($roothome)) { if ($envhome ne $roothome) { warning("$prg: resetting \$HOME value (was $envhome) to root's " . "actual home ($roothome).\n"); $ENV{'HOME'} = $roothome; } else { # envhome and roothome do agree, nothing to do, that is the good case } } else { warning("$prg: home of root not defined, strange!\n"); } } } } sub warning { print STDERR @_; } # # help, version etc etc # sub version { my $ret = sprintf "%s (TeX Live, multi) version %s\n", $prg, $version; return $ret; } sub help { my $usage = <<"EOF"; Usage: $prg [OPTION] ... [COMMAND] or: $prg-sys [OPTION] ... [COMMAND] Update the default font map files used by pdftex, dvips, and dvipdfm(x), and optionally pxdvi, as determined by all configuration files updmap.cfg (the ones returned by running "kpsewhich --all updmap.cfg", but see below). Among other things, these map files are used to determine which fonts should be used as bitmaps and which as outlines, and to determine which font files are included in the PDF or PostScript output. By default, the TeX filename database (ls-R) is also updated. Options: --cnffile FILE read FILE for the updmap configuration (can be given multiple times, in which case all the files are used) --dvipdfmxoutputdir DIR specify output directory (dvipdfm(x) syntax) --dvipsoutputdir DIR specify output directory (dvips syntax) --pdftexoutputdir DIR specify output directory (pdftex syntax) --pxdvioutputdir DIR specify output directory (pxdvi syntax) --outputdir DIR specify output directory (for all files) --copy cp generic files rather than using symlinks --force recreate files even if config hasn't changed --nomkmap do not recreate map files --nohash do not run texhash -n, --dry-run only show the configuration, no output --quiet, --silent reduce verbosity Commands: --help show this message and exit --version show version information and exit --showoption OPTION show the current setting of OPTION --showoptions OPTION show possible settings for OPTION --setoption OPTION VALUE set OPTION to value; option names below --setoption OPTION=VALUE as above, just different syntax --enable MAPTYPE MAPFILE add "MAPTYPE MAPFILE" to updmap.cfg, where MAPTYPE is Map, MixedMap, or KanjiMap --enable Map=MAPFILE add \"Map MAPFILE\" to updmap.cfg --enable MixedMap=MAPFILE add \"MixedMap MAPFILE\" to updmap.cfg --enable KanjiMap=MAPFILE add \"KanjiMap MAPFILE\" to updmap.cfg --disable MAPFILE disable MAPFILE, of whatever type --listmaps list all active and inactive maps --listavailablemaps same as --listmaps, but without unavailable map files --syncwithtrees disable unavailable map files in updmap.cfg Explanation of the map types: the (only) difference between Map and MixedMap is that MixedMap entries are not added to psfonts_pk.map. The purpose is to help users with devices that render Type 1 outline fonts worse than mode-tuned Type 1 bitmap fonts. So, MixedMap is used for fonts that are available as both Type 1 and Metafont. KanjiMap entries are added to psfonts_t1.map and kanjix.map. Explanation of the OPTION names for --showoptions, --showoptions, --setoption: dvipsPreferOutline true|false (default true) Whether dvips uses bitmaps or outlines, when both are available. dvipsDownloadBase35 true|false (default true) Whether dvips includes the standard 35 PostScript fonts in its output. pdftexDownloadBase14 true|false (default true) Whether pdftex includes the standard 14 PDF fonts in its output. pxdviUse true|false (default false) Whether maps for pxdvi (Japanese-patched xdvi) are under updmap's control. kanjiEmbed (any string) kanjiVariant (any string) See below. LW35 URWkb|URW|ADOBEkb|ADOBE (default URWkb) Adapt the font and file names of the standard 35 PostScript fonts. URWkb URW fonts with "berry" filenames (e.g. uhvbo8ac.pfb) URW URW fonts with "vendor" filenames (e.g. n019064l.pfb) ADOBEkb Adobe fonts with "berry" filenames (e.g. phvbo8an.pfb) ADOBE Adobe fonts with "vendor" filenames (e.g. hvnbo___.pfb) These options are only read and acted on by updmap; dvips, pdftex, etc., do not know anything about them. They work by changing the default map file which the programs read, so they can be overridden by specifying command-line options or configuration files to the programs, as explained at the beginning of updmap.cfg. The options kanjiEmbed and kanjiVariant specify special replacements in the map lines. If a map contains the string \@kanjiEmbed\@, then this will be replaced by the value of that option; similarly for kanjiVariant. In this way, users of Japanese TeX can select different fonts to be included in the final output. Explanation of trees and files normally used: If --cnffile is specified on the command line (possibly multiple times), its value(s) are used. Otherwise, updmap reads all the updmap.cfg files found by running \`kpsewhich -all updmap.cfg', in the order returned by kpsewhich, with one exception: an updmap.cfg found in TEXMFLOCAL is given higher priority than the updmap.cfg in TEXMFMAIN, to ensure that local adjustments by administrators take precedence over what is shipped in TeX Live. In any case, if multiple updmap.cfg files are found, all the maps mentioned in all the updmap.cfg files are merged. Thus, if updmap.cfg files are present in all trees, and the default layout is used as shipped with TeX Live, the following files are read, in the given order. For updmap-sys: TEXMFSYSCONFIG \$TEXLIVE/YYYY/texmf-config/web2c/updmap.cfg TEXMFSYSVAR \$TEXLIVE/YYYY/texmf-var/web2c/updmap.cfg TEXMFLOCAL \$TEXLIVE/texmf-local/web2c/updmap.cfg TEXMFMAIN \$TEXLIVE/YYYY/texmf/web2c/updmap.cfg TEXMFDIST \$TEXLIVE/YYYY/texmf-dist/web2c/updmap.cfg For updmap: TEXMFCONFIG \$HOME/.texliveYYYY/texmf-config/web2c/updmap.cfg TEXMFVAR \$HOME/.texliveYYYY/texmf-var/web2c/updmap.cfg TEXMFHOME \$HOME/texmf/web2c/updmap.cfg TEXMFSYSCONFIG \$TEXLIVE/YYYY/texmf-config/web2c/updmap.cfg TEXMFSYSVAR \$TEXLIVE/YYYY/texmf-var/web2c/updmap.cfg TEXMFLOCAL \$TEXLIVE/texmf-local/web2c/updmap.cfg TEXMFMAIN \$TEXLIVE/YYYY/texmf/web2c/updmap.cfg TEXMFDIST \$TEXLIVE/YYYY/texmf-dist/web2c/updmap.cfg (where YYYY is the TeX Live release version). There is another exception to keep upgradability from earlier versions of TeX Live: if a file TEXMFLOCAL/web2c/updmap-local.cfg exists (formerly used by tlmgr to merge local fonts), then the file TEXMFLOCAL/web2c/updmap.cfg is ignored (if it exists) and that updmap-local.cfg is used instead. In this case, updmap recognizes the previous syntax for disabling map files in updmap-local.cfg (this syntax is different from what is used now). According to the actions, updmap might write to one of the given files or create a new updmap.cfg, described further below. Where changes are saved: if config files are given on the command line, then the first one given will be used to save any changes from --setoption, --enable or --disable. If the config files are taken from kpsewhich output, then the algorithm is more complex: 1) If \$TEXMFCONFIG/web2c/updmap.cfg or \$TEXMFHOME/web2c/updmap.cfg appears in the list of used files, then the one listed first by kpsewhich --all (equivalently, the one returned by kpsewhich updmap.cfg), is used. 2) If neither of the above two are present and changes are made, a new config file is created in \$TEXMFCONFIG/web2c/updmap.cfg. Resolving multiple definitions of a font: If a font is defined in more than one map file, then the definition coming from the first-listed updmap.cfg is used. If a font is defined multiple times within the same map file, one is chosen arbitrarily. In both cases a warning is issued. Disabling maps: updmap.cfg files with higher priority (listed earlier) can disable maps mentioned in lower priority (listed later) updmap.cfg files by writing, e.g., \#! Map mapname.map or \#! MixedMap mapname.map in the higher-priority updmap.cfg file. As an example, suppose you have a copy of MathTime Pro fonts and want to disable the Belleek version of the fonts; that is, disable the map belleek.map. You can create the file \$TEXMFCONFIG/web2c/updmap.cfg with the content #! Map belleek.map Map mt-plus.map Map mt-yy.map and call $prg. updmap writes the map files for dvips (psfonts.map) and pdftex (pdftex.map) to the TEXMFVAR/fonts/map/updmap/{dvips,pdftex}/ directories. The log file is written to TEXMFVAR/web2c/updmap.log. When updmap-sys is run, TEXMFSYSCONFIG and TEXMFSYSVAR are used instead of TEXMFCONFIG and TEXMFVAR, respectively. This is the only difference between updmap-sys and updmap. Other locations may be used if you give them on the command line, or these trees don't exist, or you are not using the original TeX Live. To see the precise locations of the various files that will be read and written, give the -n option (or read the source). For step-by-step instructions on making new fonts known to TeX, read http://tug.org/fonts/fontinstall.html. For even more terse instructions, read the beginning of updmap.cfg. Report bugs to: tex-k\@tug.org TeX Live home page: EOF ; print &version(); print $usage; exit 0; } ### Local Variables: ### perl-indent-level: 2 ### tab-width: 2 ### indent-tabs-mode: nil ### End: # vim:set tabstop=2 expandtab: #