%%
%% This is file `framed-xetex-bidi.def',
%% generated with the docstrip utility.
%%
%% The original source files were:
%%
%% bidi.dtx  (with options: `table,framed-xetex-bidi.def')
%% 
%%   __________________________________________________
%%   Copyright (c) 2009--2016  Vafa Khalighi <persian-tex@tug.org>
%% 
%%   It may be distributed and/or modified under the LaTeX Project Public License,
%%   version 1.3c or higher (your choice). The latest version of
%%   this license is at: http://www.latex-project.org/lppl.txt
%% 
%%   This work is “author-maintained” (as per LPPL maintenance status)
%%   by Vafa Khalighi.
%% 
%% 
%% \CheckSum{47593}
%% \CharacterTable
%%  {Upper-case    \A\B\C\D\E\F\G\H\I\J\K\L\M\N\O\P\Q\R\S\T\U\V\W\X\Y\Z
%%   Lower-case    \a\b\c\d\e\f\g\h\i\j\k\l\m\n\o\p\q\r\s\t\u\v\w\x\y\z
%%   Digits        \0\1\2\3\4\5\6\7\8\9
%%   Exclamation   \!     Double quote  \"     Hash (number) \#
%%   Dollar        \$     Percent       \%     Ampersand     \&
%%   Acute accent  \'     Left paren    \(     Right paren   \)
%%   Asterisk      \*     Plus          \+     Comma         \,
%%   Minus         \-     Point         \.     Solidus       \/
%%   Colon         \:     Semicolon     \;     Less than     \<
%%   Equals        \=     Greater than  \>     Question mark \?
%%   Commercial at \@     Left bracket  \[     Backslash     \\
%%   Right bracket \]     Circumflex    \^     Underscore    \_
%%   Grave accent  \`     Left brace    \{     Vertical bar  \|
%%   Right brace   \}     Tilde         \~}
%%
\ProvidesFile{framed-xetex-bidi.def}[2012/06/05 v0.3 bidi adaptations for framed package for XeTeX engine]
\renewcommand\TitleBarFrame[3][]{\begingroup
  \ifx\delimiter#1\delimiter
    \let\TF@conlab\@empty
  \else
    \def\TF@conlab{% continuation label
     \nointerlineskip
     \smash{\rlap{\kern\wd\@tempboxa\kern\fboxrule\kern\fboxsep #1}}}%
  \fi
  %\let\TF@savecolor\current@color
  \textcolor{TFFrameColor}{%
  \CustomFBox
    {\TF@Title{#2}}{\TF@conlab}%
    \fboxrule\fboxrule\fboxrule\fboxrule
    %{\let\current@color\TF@savecolor\set@color #3}%
    {\normalcolor #3}%
  }\endgroup
}
\renewenvironment{titled-frame}[1]{%
  \def\FrameCommand{\fboxsep8pt\fboxrule2pt
     \TitleBarFrame{\textbf{#1}}}%
  \def\FirstFrameCommand{\fboxsep8pt\fboxrule2pt
     \TitleBarFrame[$\if@RTL\blacktriangleleft\else\blacktriangleright\fi$]{\textbf{#1}}}%
  \def\MidFrameCommand{\fboxsep8pt\fboxrule2pt
     \TitleBarFrame[$\if@RTL\blacktriangleleft\else\blacktriangleright\fi$]{\textbf{#1\ (cont)}}}%
  \def\LastFrameCommand{\fboxsep8pt\fboxrule2pt
     \TitleBarFrame{\textbf{#1\ (cont)}}}%
  \MakeFramed{\advance\hsize-20pt \FrameRestore}}%
 {\endMakeFramed}
\chardef\FrameRestore=\catcode`\| % for debug
\catcode`\|=\catcode`\% % (debug: insert space after backslash)
\def\fb@put@frame#1#2{\relax
 \ifdim\pagegoal=\maxdimen \pagegoal\vsize \fi
|   \message{=============== Entering putframe ====================^^J
|     \pagegoal=\the\pagegoal,  \pagetotal=\the\pagetotal. }%
 \ifinner
   \fb@putboxa#1%
   \fb@afterframe
 \else
  \dimen@\pagegoal \advance\dimen@-\pagetotal % natural space left on page
  \ifdim\dimen@<2\baselineskip % Too little room on page
|   \message{Page has only \the\dimen@\space room left; eject. }%
    \eject \fb@adjheight \fb@put@frame#1#2%
  \else % there's appreciable room left on the page
     \fb@sizeofframe#1%
|    \message{\string\pagetotal=\the\pagetotal,
|        \string\pagegoal=\the\pagegoal,
|        \string\pagestretch=\the\pagestretch,
|        \string\pageshrink=\the\pageshrink,
|        \string\fb@frh=\the\fb@frh. \space}
|    \message{^^JBox of size \the\ht\@tempboxa\space}%
     \begingroup % temporarily set \dimen@ to be...
     \advance\dimen@.8\pageshrink  % maximum space available on page
     \advance\dimen@-\fb@frh\relax % max space available for frame's contents
%%% LOOKS SUBTRACTED AND ADDED, SO DOUBLE ACCOUNTING!
     \expandafter\endgroup
     % expand \ifdim, then restore \dimen@ to real room left on page
     \ifdim\dimen@>\ht\@tempboxa % whole box does fit
|       \message{fits in \the\dimen@. }%
        % ToDo: Change this to use vsplit anyway to capture the marks
        % MERGE THIS WITH THE else CLAUSE!!!
        \fb@putboxa#1%
        \fb@afterframe
     \else % box must be split
|       \message{must be split to fit in \the\dimen@. }%
        % update frame measurement to use \FirstFrameCommand or \MidFrameCommand
        \fb@sizeofframe#2%
        \setbox\@tempboxa\vbox{% simulate frame and flexiblity of the page:
           \vskip \fb@frh \@plus\pagestretch \@minus.8\pageshrink
           \kern137sp\kern-137sp\penalty-30
           \unvbox\@tempboxa}%
        \edef\fb@resto@set{\boxmaxdepth\the\boxmaxdepth
                           \splittopskip\the\splittopskip}%
        \boxmaxdepth\z@ \splittopskip\z@
|      \message{^^JPadded box of size \the\ht\@tempboxa\space split to \the\dimen@}%
        % Split box here
        \setbox\tw@\vsplit\@tempboxa to\dimen@
|       \toks99\expandafter{\splitfirstmark}%
|       \toks98\expandafter{\splitbotmark}%
|       \message{Marks are: \the\toks99, \the\toks98. }%
        \setbox\tw@\vbox{\unvbox\tw@}% natural-sized
|       \message{Natural height of split box is \the\ht\tw@, leaving
|          \the\ht\@tempboxa\space remainder. }%
        % If the split-to size > (\vsize-\topskip), then set box to full size.
        \begingroup
        \advance\dimen@\topskip
        \expandafter\endgroup
        \ifdim\dimen@>\pagegoal
|         \message{Frame is big -- Use up the full column. }%
          \dimen@ii\pagegoal
          \advance\dimen@ii -\topskip
          \advance\dimen@ii \FrameHeightAdjust\relax
        \else  % suspect this is implemented incorrectly:
          % If the split-to size > feasible room_on_page, rebox it smaller.
          \advance\dimen@.8\pageshrink
          \ifdim\ht\tw@>\dimen@
|           \message{Box too tall; rebox it to \the\dimen@. }%
            \dimen@ii\dimen@
          \else % use natural size
            \dimen@ii\ht\tw@
          \fi
        \fi
        % Re-box contents to desired size \dimen@ii
        \advance\dimen@ii -\fb@frh
        \setbox\tw@\vbox to\dimen@ii \bgroup
        % remove simulated frame and page flexibility:
        \vskip -\fb@frh \@plus-\pagestretch \@minus-.8\pageshrink
        \unvbox\tw@ \unpenalty\unpenalty
        \ifdim\lastkern=-137sp % whole box went to next page
|          \message{box split at beginning! }%
           % need work here???
           \egroup \fb@resto@set \eject % (\vskip for frame size was discarded)
           \fb@adjheight
           \fb@put@frame#1#2% INSERTED ???
        \else % Got material split off at the head
           \egroup \fb@resto@set
           \ifvoid\@tempboxa % it all fit after all
|             \message{box split at end! }%
              \setbox\@tempboxa\box\tw@
              \fb@putboxa#1%
              \fb@afterframe
           \else % it really did split
|             \message{box split as expected. Its reboxed height is \the\ht\tw@. }%
              \ifdim\wd\tw@>\z@
                \wd\tw@\wd\@tempboxa
                \centerline{#2{\hboxL{\box\tw@}}}%  ??? \centerline bad idea
              \else
|               \message{Zero width means likely blank. Don't frame it (guess)}%
                \box\tw@
              \fi
              \hrule \@height\z@ \@width\hsize
              \eject
              \fb@adjheight
              \fb@put@frame\LastFrameCommand\MidFrameCommand
  \fi\fi\fi\fi\fi
}
\def\fb@putboxa#1{%
  \ifvoid\@tempboxa
    \PackageWarning{framed}{Boxa is void -- discard it. }%
  \else
|   \message{Frame and place boxa. }%
|   %{\showoutput\showbox\@tempboxa}%
    \centerline{#1{\hboxL{\box\@tempboxa}}}%
  \fi
}
\catcode`\|=\FrameRestore
\def\FrameRestore{%
   \let\if@nobreak\iffalse
   \let\if@noskipsec\iffalse
   \let\-\@dischyph
   \let\'\@acci\let\`\@accii\let\=\@acciii
   %  \message{FrameRestore:
   %    \@totalleftmargin=\the \@totalleftmargin,
   %    \rightmargin=\the\rightmargin,
   %    \@listdepth=\the\@listdepth.  }%
   % Test if we are in a list (or list-like paragraph)
   \ifnum \ifdim\@totalleftmargin>\z@ 1\fi
          \ifdim\rightmargin>\z@ 1\fi
          \ifnum\@listdepth>\z@ 1\fi 0>\z@
     %     \message{In a list: \linewidth=\the\linewidth, \@totalleftmargin=\the\@totalleftmargin,
     %       \parshape=\the\parshape, \columnwidth=\the\columnwidth, \hsize=\the\hsize,
     %       \labelwidth=\the\labelwidth. }%
     \@setminipage % snug fit around the item
     % Now try to propageate changes of width from \hsize to list parameters.
     % This is deficient, but a more advanced way to indicate modification to text
     % dimensions is not (yet) provided; in particular, no separate left/right
     % adjustment.
     \advance\linewidth-\columnwidth \advance\linewidth\hsize
     \parshape\@ne \@totalleftmargin \linewidth
   \else % Not in list
     \linewidth=\hsize
     %\message{No list, set \string\linewidth=\the\hsize. }%
   \fi
   \sloppy
}
\endinput
%%
%% End of file `framed-xetex-bidi.def'.
