%%
%% This is file `toptesi.sty',
%% generated with the docstrip utility.
%%
%% The original source files were:
%%
%% toptesi.dtx  (with options: `topsty')
%%   ______________________________________________________
%%   The TOPtesi package
%%   Copyright (C) 2010 Claudio Beccari
%%   All rights reserved
%% 
%%   License information appended
%% 
%% \CharacterTable
%%  {Upper-case    \A\B\C\D\E\F\G\H\I\J\K\L\M\N\O\P\Q\R\S\T\U\V\W\X\Y\Z
%%   Lower-case    \a\b\c\d\e\f\g\h\i\j\k\l\m\n\o\p\q\r\s\t\u\v\w\x\y\z
%%   Digits        \0\1\2\3\4\5\6\7\8\9
%%   Exclamation   \!     Double quote  \"     Hash (number) \#
%%   Dollar        \$     Percent       \%     Ampersand     \&
%%   Acute accent  \'     Left paren    \(     Right paren   \)
%%   Asterisk      \*     Plus          \+     Comma         \,
%%   Minus         \-     Point         \.     Solidus       \/
%%   Colon         \:     Semicolon     \;     Less than     \<
%%   Equals        \=     Greater than  \>     Question mark \?
%%   Commercial at \@     Left bracket  \[     Backslash     \\
%%   Right bracket \]     Circumflex    \^     Underscore    \_
%%   Grave accent  \`     Left brace    \{     Vertical bar  \|
%%   Right brace   \}     Tilde         \~}

\NeedsTeXFormat{LaTeX2e}
\ProvidesPackage{toptesi}%
[2010/11/14 v.5.01 Extension for toptesi.cls]%
\def\TRON{\tracingcommands \tw@ \tracingmacros \tw@}
\def\TROFF{\tracingcommands\z@ \tracingmacros \z@}
\let\TROF\TROFF
\newlength\T@Pbinding\setlength\T@Pbinding{7mm}\def\setbindingcorrection#1{\T@Pbinding=#1}
\newif\if@binding \@bindingfalse
\newif\ifT@Ppdfa  \T@Ppdfafalse
\newif\ifchapterbibliography \chapterbibliographyfalse
\DeclareOption{cucitura}{\@bindingtrue}
\DeclareOption{14pt}{\input{topsiz14.clo}}
\DeclareOption{chapterbib}{\chapterbibliographytrue}
\DeclareOption{trieste}{\AtEndOfPackage{\RequirePackage{trieste}}}
\DeclareOption{classica}{\AtEndOfPackage{\RequirePackage{trieste}}}
\DeclareOption{pdfa}{\T@Ppdfatrue}
\ProcessOptions\relax
\RequirePackage{graphicx}
\textheight 585pt
\divide\textheight by \baselineskip
\multiply\textheight by \baselineskip
\advance\textheight by \topskip
\ifx\f@size\@xivpt
    \textwidth=138mm
\else
    \textwidth=150mm
\fi
\oddsidemargin=\paperwidth
\advance\oddsidemargin -\textwidth
\divide\oddsidemargin \tw@
\advance\oddsidemargin -1in
\evensidemargin=\oddsidemargin
\marginparwidth\oddsidemargin
\advance\marginparwidth 1in
\advance\marginparwidth-2.5\marginparsep
\AtBeginDocument{%
\if@binding
 \typeout{Messaggio Toptesi: Ricalcolo i margini}
 \advance\oddsidemargin \T@Pbinding
 \advance\evensidemargin -\T@Pbinding
 \advance\marginparwidth -\T@Pbinding
 \advance\marginparwidth -\T@Pbinding
\fi}
\def\lapagina{\thepage}
\mark{{}{}}
\newbox\@intesta
\def\ps@plain{\let\@mkboth\@gobbletwo
\def\@oddfoot{\null\hfill {{\lapagina}}\hfill \null}\def\@oddhead{}
\def\@evenhead{}\let\@evenfoot\@oddfoot}
\if@twoside
   \def\ps@headings{\let\@mkboth\markboth%
   \def\@oddfoot{\null\hfill {{\lapagina}} \hfill\null}
   \let\@evenfoot\@oddfoot
   %
   \def\@evenhead{\setbox\@intesta\hbox{\footnotesize\slshape
        \leftmark}%
   \ifdim\wd\@intesta>\textwidth \headWarn{\chapter}\fi%
   \underline{\makebox[\textwidth]{\footnotesize\slshape
        \strut\leftmark}}}%
   \def\@oddhead{\setbox\@intesta\hbox{\footnotesize\slshape
        \rightmark}%
   \ifdim\wd\@intesta>\textwidth \headWarn{\section}\fi%
   \underline{\makebox[\textwidth]{\footnotesize\slshape
        \strut\rightmark}}}%
   \def\chaptermark##1{\markboth{\thechapter\ -- ##1}{}}
   \def\sectionmark##1{\markright{\ifnum\c@secnumdepth>\z@
   \thesection\ -- \fi ##1}}}
\else
   \def\ps@headings{\let\@mkboth\markboth
   \def\@oddfoot{\null \hfill {\lapagina} \hfill \null}
   \def\@evenfoot{}
   \def\@oddhead{\setbox\@intesta\hbox{\footnotesize\slshape
        \rightmark}%
   \ifdim\wd\@intesta>\textwidth \headWarn{\chapter}\fi%
   \underline{\makebox[\textwidth]{\footnotesize\slshape
        \strut\rightmark}}}%
   \def\chaptermark##1{\markright{\thechapter\ -- ##1}}}
\fi
\def\headWarn#1{\PackageWarning{toptesi}{%
   THE HEADING IS TOO LONG\MessageBreak
   Use the optional argument of command \string#1\MessageBreak
   See the LaTeX Handbook (1994) on section C.4.1\MessageBreak}}
\newif\iffigurespage
\newif\iftablespage
\newif\ifnumeriromani
\newif\iffrontmatter
\def\frontmatter{\clearpage\ps@plain\pagenumbering{roman}%
    \numeriromanitrue\frontmattertrue\@openrightfalse}
\def\mainmatter{\if@twoside\@openrighttrue\fi
    \clearpage\ps@headings\pagenumbering{arabic}%
    \numeriromanifalse\frontmatterfalse}
\AtBeginDocument{\frontmatter}
\figurespagefalse
\tablespagefalse
\def\sommario{%
 \iffrontmatter\else\frontmattertrue\fi
 \if@openright\cleardoublepage\else\clearpage\fi
 \global\@topnum\z@
 \@afterindentfalse
 \@schapter{\summaryname}%
 \addcontentsline{toc}{chapter}{\summaryname}%
        }
\def\ringraziamenti{%
 \iffrontmatter\else\frontmattertrue\fi
 \if@openright\cleardoublepage\else\clearpage\fi
 \global\@topnum\z@
 \@afterindentfalse
 \@schapter{\acknowledgename}%
 \addcontentsline{toc}{chapter}{\acknowledgename}%
        }
\renewcommand\chapter{%
  \iffrontmatter\mainmatter\fi
  \if@openright\cleardoublepage\else\clearpage\fi
  \thispagestyle{plain}%
  \global\@topnum\z@
  \@afterindentfalse
  \secdef\@chapter\@schapter}
\renewcommand\part{%
  \iffrontmatter\mainmatter\fi
  \if@openright\cleardoublepage\else\clearpage\fi
  \thispagestyle{empty}%
  \if@twocolumn\onecolumn\@tempswatrue\else\@tempswafalse\fi
  \null\vfil
  \secdef\@part\@spart}
\renewcommand\tableofcontents{%
 \if@twocolumn\@restonecoltrue\onecolumn\else\@restonecolfalse\fi
 \if@openright\cleardoublepage\else\clearpage\fi
 \global\@topnum\z@
 \@afterindentfalse
 \@schapter{\contentsname}%
 \@starttoc{toc}%
 \clearpage
 \if@restonecol\twocolumn\fi
    }
\renewcommand\listoffigures{%
    \if@twocolumn\@restonecoltrue\onecolumn\else\@restonecolfalse\fi
    \if@openright\cleardoublepage\else\clearpage\fi
    \global\@topnum\z@
    \@afterindentfalse
    \@schapter{\listfigurename}
    \@mkboth{\listfigurename}{\listfigurename}%
    \@starttoc{lof}%
    \clearpage
    \if@restonecol\twocolumn\fi
    }
\renewcommand\listoftables{%
    \if@twocolumn\@restonecoltrue\onecolumn\else\@restonecolfalse\fi
    \if@openright\cleardoublepage\else\clearpage\fi
    \global\@topnum\z@
    \@afterindentfalse
    \@schapter{\listtablename}%
    \@mkboth{\listtablename}{\listtablename}%
    \@starttoc{lot}%
    \clearpage
    \if@restonecol\twocolumn\fi
    }
\def\indici{%
 \iffrontmatter\else\frontmattertrue\fi
        \tableofcontents
        \iftablespage
                {\addvspace{10pt}
                \let\saveaddvspace=\addvspace
                \def\addvspace##1{}
                \listoftables
                \let\addvspace=\saveaddvspace}
        \fi
        \iffigurespage
                {\addvspace{10pt}
                \let\saveaddvspace=\addvspace
                \def\addvspace##1{}
                \listoffigures
                \let\addvspace=\saveaddvspace}
        \fi
}
\onecolumn
\if@twoside
    \flushbottom
\else
    \ifx\@xivpt\f@size
        \raggedbottom
    \else
        \flushbottom
    \fi
\fi
\brokenpenalty=10000
\def\interlinea#1{\linespread{#1}\selectfont}
\def\endinterlinea{\par}
\def \@floatboxreset {%
        \reset@font
        \linespread{1}%
        \normalsize
        \@setminipage
}
\def\fps@figure{htb} \def\fps@table{htb}
\setcounter{topnumber}{2}
\def\topfraction{1}
\setcounter{bottomnumber}{1}
\def\bottomfraction{.5}
\setcounter{totalnumber}{3}
\def\textfraction{0}
\def\floatpagefraction{0}
\setcounter{dbltopnumber}{2}
\def\dbltopfraction{1}
\def\dblfloatpagefraction{0}
\newdimen\captionwidth
\long\def\@makecaption#1#2{%
   \begingroup
   \small \parskip\z@ \parindent\z@
   \finalhyphendemerits 100000\relax
   \linespread{0.95}\selectfont
   \vskip \abovecaptionskip
   \captionwidth=\hsize
   \advance\captionwidth-3em
   \setbox0 \hbox{#1.\quad#2}%
   \ifdim\wd0>\hsize
      \setbox1 \vbox{\hsize=\captionwidth
      \unhbox0\par\global\setbox2\lastbox}%
      \setbox2\hbox{\unhbox2}%
      \ifdim\wd2<0.333333\captionwidth
         \count255=\ht1 \advance\count255 \dp1
         \divide\count255\baselineskip
         \advance\count255\@ne
         \@tempdima=\wd2
         \advance\@tempdima \count255\captionwidth
         \advance\@tempdima 0.5\captionwidth
         \advance \count255\@ne
         \divide \@tempdima \count255
         \captionwidth=\@tempdima
         \setbox0 \vbox{\hsize\captionwidth
         #1.\quad#2}
      \else
         \setbox2\hbox to\captionwidth{\unhbox2 \hfill}%
         \setbox0\vbox{\unvbox1\box2}%
      \fi
   \fi
   \makebox[\hsize]{\box0}%
   \endgroup
}
\def\redef@bibitem{\def\@bibitem##1{\item\if@filesw
       \immediate\write\@auxout
       {\string\bibcite{##1}{\thechapter.\the\c@enumi}}\fi\ignorespaces}}
\def\thebibliography#1{%
 \ifchapterbibliography\section*{\bibname}\relax
    \if@twoside\markright{\bibname}\fi
    \addcontentsline{toc}{section}{\bibname}\relax
    \redef@bibitem
    \list{[\thechapter.\arabic{enumi}]}{%
    \settowidth\labelwidth{[\thechapter.#1]}\leftmargin\labelwidth
    \advance\leftmargin\labelsep\itemsep\z@ plus 1pt\parsep\z@
    \usecounter{enumi}}
 \else
    \chapter*{\bibname}\relax
    \@mkboth{\bibname}{\bibname}\relax
    \addcontentsline{toc}{chapter}{\bibname}\relax
    \list{[\arabic{enumi}]}{\settowidth\labelwidth{[#1]}%
    \leftmargin\labelwidth
    \advance\leftmargin\labelsep\itemsep\z@ plus 1pt\parsep\z@
    \usecounter{enumi}}
 \fi
 \def\newblock{\hskip .11em plus .33em minus -.07em}
 \sloppy
 \sfcode`\.=1000\relax}

\let\endthebibliography=\endlist
\long\def\@footnotetext#1{\insert\footins{\linespread{1}\footnotesize
    \interlinepenalty\interfootnotelinepenalty
    \splittopskip\footnotesep
    \splitmaxdepth \dp\strutbox \floatingpenalty \@MM
    \hsize\columnwidth \@parboxrestore
   \edef\@currentlabel{\csname p@footnote\endcsname\@thefnmark}%
   \@makefntext{\rule{\z@}{\footnotesep}\ignorespaces#1\strut}}}
\mathcode`\,="013B
\catcode`\^^Z=10
\topmargin 0pt
\let\summaryname\empty
\let\acknowledgename\empty
\newcommand*\ExtendCaptions[3]{{%
\@ifundefined{captions#1}{%
\PackageWarning{toptesi}{Language option #1 not specified\MessageBreak
Skipping any redefinition\MessageBreak}%
}{%
\expandafter\let\expandafter\@tempA\csname captions#1\endcsname
 \toks0=\expandafter{\@tempA%
    \def\summaryname{#2}%
    \def\acknowledgename{#3}}%
 \expandafter\xdef\csname captions#1\endcsname{\the\toks0}%
 }}}%
\ExtendCaptions{italian}{Sommario}{Ringraziamenti}
\ExtendCaptions{english}{Summary}{Acknowledgements}
\def\italiano{\selectlanguage{italian}}%
\def\english{\selectlanguage{english}}%
\let\inglese\english
\AtBeginDocument{%
    \italiano
    \renewcommand\@chapapp{\chaptername}%
    }
\RequirePackage{topfront}
\RequirePackage{topcoman}
\def\sf@size{7}
\renewcommand*\not{\mathrel{\mathchoice%
{\rlap{$\displaystyle\mkern2.5mu\mathnormal{/}$}}%
{\rlap{$\textstyle\mkern2.5mu\mathnormal{/}$}}%
{\rlap{$\scriptstyle\mkern2.5mu\mathnormal{/}$}}%
{\rlap{$\scriptscriptstyle\mkern2.5mu\mathnormal{/}$}}%
}}
\renewcommand\mapstochar{\mathrel{\mathchoice
{\displaystyle\unitlength=0.0555\fontdimen6\font
   \picture(0,0)\put(1,1.5){\linethickness{0.72\unitlength}%
   \line(0,1){6}}\endpicture}
{\textstyle\unitlength=0.0555\fontdimen6\font
   \picture(0,0)\put(1,1.5){\linethickness{0.72\unitlength}%
   \line(0,1){6}}\endpicture}
{\scriptstyle\unitlength=0.0555\fontdimen6\font
   \picture(0,0)\put(1,0.55){\linethickness{0.61\unitlength}%
   \line(0,1){5}}\endpicture}
{\scriptscriptstyle\unitlength=0.0555\fontdimen6\font
   \picture(0,0)\put(1,0.2){\linethickness{0.56\unitlength}%
   \line(0,1){4}}\endpicture}
}}
\ifT@Ppdfa\RequirePackage[a-1b]{pdfx}\fi
%% 
%% Copyright 2005-2010 Claudio Beccari
%% 
%% Distributable under the LaTeX Project Public License,
%% version 1.3c or higher (your choice). The latest version of
%% this license is at: http://www.latex-project.org/lppl.txt
%% 
%% This work is "author-maintained"
%% 
%% This work consists of this file toptesi.dtx, a README file
%% and the derived files:
%% 
%% toptesi.cls, toptesi.sty, topfront.sty, topcommand.sty, topsize14,
%% trieste.sty, toptesi.cfg, and the English documentation toptesi.pdf;
%% 
%% Furthermore the bundle contains the documentation source file toptesi-doc.tex
%% and the derived file toptesi-doc.pdf.
%% 
%% The toptesi-example.tex source file is just an example that shows how
%% to use the various commands; by commenting or decommenting certain
%% source lines it is possible to typeset different kind of theses and their
%% frontpages.
%% 
%% The toptesi.cfg file is a sample of a local configuration file that can be
%% freely edited and modified.
%% 
%% By running pdflatex on toptesi.dtx the user gets the class, sty and cfg files
%% and the English documentation file in pdf format.
%% 
%% The documentation file toptesi-doc.pdf is in Italian; its source file is
%% another example of how to use toptesi.
%%
%% End of file `toptesi.sty'.