% \iffalse meta-comment
%
% Copyright (C) 2008-2009 by Hans Hagen, Taco Hoekwater and Elie Roux
% <elie.roux@telecom-bretagne.eu>.
%
% This work is under the CC0 license.
%
% This Current Maintainer of this work is Elie Roux.
%
% This work consists of the main source file luamplib.dtx
% and the derived files
%    luamplib.sty, luamplib.lua, luamplib-createmem.lua and luamplib.pdf.
%
%
% Unpacking:
%    tex luamplib.dtx
% 
% Documentation:
%    pdflatex luamplib.dtx
%
%    The class ltxdoc loads the configuration file ltxdoc.cfg
%    if available. Here you can specify further options, e.g.
%    use A4 as paper format:
%       \PassOptionsToClass{a4paper}{article}
%
%
%<*ignore>
\begingroup
  \def\x{LaTeX2e}%
\expandafter\endgroup
\ifcase 0\ifx\install y1\fi\expandafter
         \ifx\csname processbatchFile\endcsname\relax\else1\fi
         \ifx\fmtname\x\else 1\fi\relax
\else\csname fi\endcsname
%</ignore>
%<*install>
\input docstrip.tex
\Msg{************************************************************************}
\Msg{* Installation}
\Msg{* Package: luamplib 2010/05/10 v1.02 metapost package for LuaTeX.}
\Msg{************************************************************************}

\keepsilent
\askforoverwritefalse

\let\MetaPrefix\relax

\preamble
This is a generated file.

Copyright (C) 2008-2009 by Hans Hagen, Taco Hoekwater and Elie Roux
<elie.roux@telecom-bretagne.eu>.

This work is under the CC0 license.

This Current Maintainer of this work is Elie Roux.

This work consists of the main source file luamplib.dtx
and the derived files
   luamplib.sty, luamplib.lua, luamplib-createmem.lua and luamplib.pdf.

\endpreamble

\let\MetaPrefix\DoubleperCent

\generate{%
  \usedir{tex/luatex/mplib}%
  \file{luamplib.sty}{\from{luamplib.dtx}{package}}%
}

% The following hacks are to generate a lua file with lua comments starting by
% -- instead of %%

\def\MetaPrefix{-- }

\def\luapostamble{%
  \MetaPrefix^^J%
  \MetaPrefix\space End of File `\outFileName'.%
}

\def\currentpostamble{\luapostamble}%

\generate{%
  \usedir{tex/luatex/mplib}%
  \file{luamplib.lua}{\from{luamplib.dtx}{lua}}%
  \file{luamplib-createmem.lua}{\from{luamplib.dtx}{gen-lua}}%
}

\obeyspaces
\Msg{************************************************************************}
\Msg{*}
\Msg{* To finish the installation you have to move the following}
\Msg{* files into a directory searched by TeX:}
\Msg{*}
\Msg{*     luamplib.sty luamplib.lua}
\Msg{*}
\Msg{* Happy TeXing!}
\Msg{*}
\Msg{************************************************************************}

\endbatchfile
%</install>
%<*ignore>
\fi
%</ignore>
%<*driver>
\NeedsTeXFormat{LaTeX2e}
\ProvidesFile{luamplib.drv}%
  [2010/05/10 v1.03 mplib package for LuaTeX.]%
\documentclass{ltxdoc}
\begin{document}
  \DocInput{luamplib.dtx}%
\end{document}
%</driver>
% \fi
%
% \CheckSum{2}
%
% \CharacterTable
%  {Upper-case    \A\B\C\D\E\F\G\H\I\J\K\L\M\N\O\P\Q\R\S\T\U\V\W\X\Y\Z
%   Lower-case    \a\b\c\d\e\f\g\h\i\j\k\l\m\n\o\p\q\r\s\t\u\v\w\x\y\z
%   Digits        \0\1\2\3\4\5\6\7\8\9
%   Exclamation   \!     Double quote  \"     Hash (number) \#
%   Dollar        \$     Percent       \%     Ampersand     \&
%   Acute accent  \'     Left paren    \(     Right paren   \)
%   Asterisk      \*     Plus          \+     Comma         \,
%   Minus         \-     Point         \.     Solidus       \/
%   Colon         \:     Semicolon     \;     Less than     \<
%   Equals        \=     Greater than  \>     Question mark \?
%   Commercial at \@     Left bracket  \[     Backslash     \\
%   Right bracket \]     Circumflex    \^     Underscore    \_
%   Grave accent  \`     Left brace    \{     Vertical bar  \|
%   Right brace   \}     Tilde         \~}
%
% \title{The \textsf{luamplib} package}
% \date{2010/05/10 v1.03}
% \author{Hans Hagen, Taco Hoekwater and Elie Roux \\
% \texttt{elie.roux@telecom-bretagne.eu}}
%
% \maketitle
%
% \begin{abstract}
% Package to have metapost code typeset directly in a document with Lua\TeX .
% \end{abstract}
%
% \section{Documentation}
%
% This packages aims at providing a simple way to typeset directly metapost
% code in a document with Lua\TeX . Lua\TeX\ is built with the lua
% \texttt{mplib} library, that runs metapost code. This package is basically a
% wrapper (in Lua) for the Lua \texttt{mplib} functions and some \TeX\
% functions to have the output of the \texttt{mplib} functions in the pdf.
%
% The package need to be in PDF mode in order to output something, as PDF
% specials are not supported by the DVI format and tools.
%
% The metapost figures are put in a \TeX\ \texttt{hbox} with dimensions
% adjusted to the metapost code.
%
% The code is from the \texttt{supp-mpl.lua} and \texttt{supp-mpl.tex} files
% from Con\TeX t, they have been adapted to \LaTeX\ and Plain by Elie Roux.
% The changes are:
%
% \begin{itemize}
% \item a \LaTeX\ environment
% \item all \TeX\ macros start by \texttt{mplib}
% \item use of the luatexbase printing and module functions
% \item adapted warning, error and log messages
% \end{itemize}
%
% Using this package is easy: in Plain, type your metapost code between the
% macros \texttt{mplibcode} and \texttt{endmplibcode}, and in \LaTeX\ in the
% \texttt{mplibcode} environment.
%
% In order to use metapost, some \texttt{.mem} files are needed. These files
% must be generated with the same version of \texttt{mplib} as the version of
% Lua\TeX . These files names can be changed, they are by default
% \texttt{mpost.mem} and \texttt{mpfun.mem}. If this package is
% to be included in a distribution, some values may have to be changed in the
% file \texttt{luamplib.lua}, see comments.
%
% If your distribution does not provide valid \texttt{.mem} files (\TeX Live
% 2009 will be the first), you'll have to generate and install them by hand,
% with the script \texttt{luamplib-createmem.lua} included in this package
% if you want them.
%
% These .mem files are not mandatory though. If this package doesn't find the
% mem files, it will just input the \texttt{.mp} file, and work without problem;
% the only difference is that it may be a bit slower but this is not noticeable
% on a modern computer.
%
% \section{Files}
%
% This package contains three files:
% \begin{itemize}
% \item \texttt{luamplib.lua} containing the lua code that calls mplib
% \item \texttt{luamplib.sty} containing the macros for \LaTeX\ and Plain
% \item \texttt{create-mem.lua}, a standalone mem generation script
% \end{itemize}
%
% \iffalse
%<*lua>
% \fi
%
% \subsection{\texttt{luamplib.lua}}
%
%    First the \texttt{luamplib} module is registered as a Lua\TeX\ module,
%    with some informations. Here we can't name it \texttt{mplib}, as the name
%    is already taken.
%
%    \begin{macrocode}

module('luamplib', package.seeall)

luamplib.module = {
    name          = "luamplib",
    version       =  1.03,
    date          = "2010/05/10",
    description   = "Lua package to typeset Metapost with LuaTeX's MPLib.",
    author        = "Hans Hagen, Taco Hoekwater & Elie Roux",
    copyright     = "ConTeXt Development Team & Elie Roux",
    license       = "CC0",
}

luatexbase.provides_module(luamplib.module)

%    \end{macrocode}
%    This module is a stripped down version of libraries that are used by
%    Con\TeX t.
%    \begin{macrocode}

local format, concat, abs = string.format, table.concat, math.abs

%    \end{macrocode}
% 
%    The \texttt{mem} file and the format name are hardcoded, and they can be
%    set with \TeX\ if it's useful. The \TeX\ distributions should change
%    these values if necessary.
%
%    \begin{macrocode}

luamplib.currentformat = "plain"
luamplib.currentmem = "mpost"

local currentformat = luamplib.currentformat
local currentmem = luamplib.currentmem

function luamplib.setformat (name)
    luamplib.currentformat = name
end

function luamplib.setmemfile(name)
    luamplib.currentmem = name
end

%    \end{macrocode}
%
%    We use the \texttt{kpse} library and make it behave like when used
%    with Metapost. To find the .mem files with kpse, we have to make a
%    small hack... that might be a little bug.
%
%    \begin{macrocode}

local mpkpse = kpse.new("luatex","mpost")

function luamplib.finder(name, mode, ftype)
    if mode == "w" then
        return name
    else
        local result = mpkpse:find_file(name,ftype)
        if not result and ftype == "mem" then
            result = mpkpse:find_file("metapost/"..name,ftype)
        end
        return result
    end
end

function luamplib.info (...)
    luatexbase.module_info('luamplib', format(...))
end

function luamplib.log (...)
    luatexbase.module_log('luamplib', format(...))
end

function luamplib.term (...)
    luatexbase.module_term('luamplib', format(...))
end

function luamplib.warning (...)
    luatexbase.module_warning('luamplib', format(...))
end

function luamplib.error (...)
    luatexbase.module_error('luamplib', format(...))
end

%    \end{macrocode}
%
%    This is a small hack for \LaTeX . In \LaTeX\ we read the metapost code
%    line by line, but it needs to be passed entirely to
%    \texttt{luamplib.process}, so we simply add the lines in
%    \texttt{luamplib.data} and at the end we call \texttt{luamplib.process}
%    on \texttt{luamplib.data}.
%
%    \begin{macrocode}

luamplib.data = ""

function luamplib.resetdata()
    luamplib.data = ""
end

function luamplib.addline(line)
    luamplib.data = luamplib.data .. '\n' .. line
end

function luamplib.processlines()
    luamplib.process(luamplib.data)
    luamplib.resetdata()
end

%    \end{macrocode}
%
%
% \begin{macro}{luamplib.input mp}
%
%    This function creates a new mplib object and inputs the
%    good .mp file. It's less efficient than loading the .mem
%    file, but it works more safely, as the .mp file does not
%    depend on the version of the mpost program.
%
%    \begin{macrocode}

function luamplib.input_mp(name)
    local mpx = mplib.new {
        ini_version = true,
        find_file = luamplib.finder,
        job_name = name,
    }
    mpx:execute(format("input %s ;",name))
    return mpx
end

%    \end{macrocode}
%
% \end{macro}
%
% \begin{macro}{luamplib.load}
%
%    This function is the one loading the metapost format we want. It uses the
%    \texttt{luamplib.currentformat} and \texttt{luamplib.currentmem} to
%    determine the format and the mem file to use.
%
%    The rest of this module is not documented. More info can be found in the
%    Lua\TeX\ manual, articles in user group journals and the files that ship
%    with Con\TeX t.
%
%    \begin{macrocode}

function luamplib.load()
    local mpx = mplib.new {
        ini_version = false,
        mem_name = currentmem,
        find_file = luamplib.finder
    }
    if mpx then
        luamplib.log("using mem file %s", luamplib.finder(currentmem, 'r', 'mem'))
    else
        mpx = luamplib.input_mp(currentformat)
        if mpx then
            luamplib.log("using mp file %s", luamplib.finder(currentformat, 'r', 'mp'))
        else
            luamplib.error("unable to load the metapost format.")
        end
    end
    return mpx
end

%    \end{macrocode}
%
% \end{macro}
%
%    \begin{macrocode}

function luamplib.report(result)
    if not result then
        luamplib.error("no result object")
    elseif result.status > 0 then
        local t, e, l, f = result.term, result.error, result.log
        if l then
            luamplib.log(l)
        end
        if t then
            luamplib.term(t)
        end
        if e then
            if result.status == 1 then
                luamplib.warning(e)
            else
                luamplib.error(e)
            end
        end
        if not t and not e and not l then
            if result.status == 1 then
                luamplib.warning("unknown error, no error, terminal or log messages, maybe missing beginfig/endfig")
            else
                luamplib.error("unknown error, no error, terminal or log messages, maybe missing beginfig/endfig")
            end
        end
    else
        return true
    end
    return false
end

function luamplib.process(data)
    local converted, result = false, {}
    local mpx = luamplib.load()
    if mpx and data then
        local result = mpx:execute(data)
        if luamplib.report(result) then
            if result.fig then
                converted = luamplib.convert(result)
            else
                luamplib.warning("no figure output")
            end
        end
    else
        luamplib.error("Mem file unloadable. Maybe generated with a different version of mplib?")
    end
    return converted, result
end

local function getobjects(result,figure,f)
    return figure:objects()
end

function luamplib.convert(result, flusher)
    luamplib.flush(result, flusher)
    return true -- done
end

local function pdf_startfigure(n,llx,lly,urx,ury)
    tex.sprint(format("\\mplibstarttoPDF{%s}{%s}{%s}{%s}",llx,lly,urx,ury))
end

local function pdf_stopfigure()
    tex.sprint("\\mplibstoptoPDF")
end

function pdf_literalcode(fmt,...) -- table
    tex.sprint(format("\\mplibtoPDF{%s}",format(fmt,...)))
end

function pdf_textfigure(font,size,text,width,height,depth)
    text = text:gsub(".","\\hbox{%1}") -- kerning happens in metapost
    tex.sprint(format("\\mplibtextext{%s}{%s}{%s}{%s}{%s}",font,size,text,0,-( 7200/ 7227)/65536*depth))
end

local bend_tolerance = 131/65536

local rx, sx, sy, ry, tx, ty, divider = 1, 0, 0, 1, 0, 0, 1

local function pen_characteristics(object)
    if luamplib.pen_info then
        local t = luamplib.pen_info(object)
        rx, ry, sx, sy, tx, ty = t.rx, t.ry, t.sx, t.sy, t.tx, t.ty
        divider = sx*sy - rx*ry
        return not (sx==1 and rx==0 and ry==0 and sy==1 and tx==0 and ty==0), t.width
    else
        rx, sx, sy, ry, tx, ty, divider = 1, 0, 0, 1, 0, 0, 1
        return false, 1
    end
end

local function concat(px, py) -- no tx, ty here
    return (sy*px-ry*py)/divider,(sx*py-rx*px)/divider
end

local function curved(ith,pth)
    local d = pth.left_x - ith.right_x
    if abs(ith.right_x - ith.x_coord - d) <= bend_tolerance and abs(pth.x_coord - pth.left_x - d) <= bend_tolerance then
        d = pth.left_y - ith.right_y
        if abs(ith.right_y - ith.y_coord - d) <= bend_tolerance and abs(pth.y_coord - pth.left_y - d) <= bend_tolerance then
            return false
        end
    end
    return true
end

local function flushnormalpath(path,open)
    local pth, ith
    for i=1,#path do
        pth = path[i]
        if not ith then
            pdf_literalcode("%f %f m",pth.x_coord,pth.y_coord)
        elseif curved(ith,pth) then
            pdf_literalcode("%f %f %f %f %f %f c",ith.right_x,ith.right_y,pth.left_x,pth.left_y,pth.x_coord,pth.y_coord)
        else
            pdf_literalcode("%f %f l",pth.x_coord,pth.y_coord)
        end
        ith = pth
    end
    if not open then
        local one = path[1]
        if curved(pth,one) then
            pdf_literalcode("%f %f %f %f %f %f c",pth.right_x,pth.right_y,one.left_x,one.left_y,one.x_coord,one.y_coord )
        else
            pdf_literalcode("%f %f l",one.x_coord,one.y_coord)
        end
    elseif #path == 1 then
        -- special case .. draw point
        local one = path[1]
        pdf_literalcode("%f %f l",one.x_coord,one.y_coord)
    end
    return t
end

local function flushconcatpath(path,open)
    pdf_literalcode("%f %f %f %f %f %f cm", sx, rx, ry, sy, tx ,ty)
    local pth, ith
    for i=1,#path do
        pth = path[i]
        if not ith then
           pdf_literalcode("%f %f m",concat(pth.x_coord,pth.y_coord))
        elseif curved(ith,pth) then
            local a, b = concat(ith.right_x,ith.right_y)
            local c, d = concat(pth.left_x,pth.left_y)
            pdf_literalcode("%f %f %f %f %f %f c",a,b,c,d,concat(pth.x_coord, pth.y_coord))
        else
           pdf_literalcode("%f %f l",concat(pth.x_coord, pth.y_coord))
        end
        ith = pth
    end
    if not open then
        local one = path[1]
        if curved(pth,one) then
            local a, b = concat(pth.right_x,pth.right_y)
            local c, d = concat(one.left_x,one.left_y)
            pdf_literalcode("%f %f %f %f %f %f c",a,b,c,d,concat(one.x_coord, one.y_coord))
        else
            pdf_literalcode("%f %f l",concat(one.x_coord,one.y_coord))
        end
    elseif #path == 1 then
        -- special case .. draw point
        local one = path[1]
        pdf_literalcode("%f %f l",concat(one.x_coord,one.y_coord))
    end
    return t
end

%    \end{macrocode}
%
%    Support for specials in DVI has been removed.
%
%    \begin{macrocode}

function luamplib.flush(result,flusher)
    if result then
        local figures = result.fig
        if figures then
            for f=1, #figures do
                luamplib.log("flushing figure %s",f)
                local figure = figures[f]
                local objects = getobjects(result,figure,f)
                local fignum = tonumber((figure:filename()):match("([%d]+)$") or figure:charcode() or 0)
                local miterlimit, linecap, linejoin, dashed = -1, -1, -1, false
                local bbox = figure:boundingbox()
                local llx, lly, urx, ury = bbox[1], bbox[2], bbox[3], bbox[4] -- faster than unpack
                if urx < llx then
                    -- invalid
                    pdf_startfigure(fignum,0,0,0,0)
                    pdf_stopfigure()
                else
                    pdf_startfigure(fignum,llx,lly,urx,ury)
                    pdf_literalcode("q")
                    if objects then
                        for o=1,#objects do
                            local object = objects[o]
                            local objecttype = object.type
                            if objecttype == "start_bounds" or objecttype == "stop_bounds" then
                                -- skip
                            elseif objecttype == "start_clip" then
                                pdf_literalcode("q")
                                flushnormalpath(object.path,t,false)
                                pdf_literalcode("W n")
                            elseif objecttype == "stop_clip" then
                                pdf_literalcode("Q")
                                miterlimit, linecap, linejoin, dashed = -1, -1, -1, false
                            elseif objecttype == "special" then
                                -- not supported
                            elseif objecttype == "text" then
                                local ot = object.transform -- 3,4,5,6,1,2
                                pdf_literalcode("q %f %f %f %f %f %f cm",ot[3],ot[4],ot[5],ot[6],ot[1],ot[2])
                                pdf_textfigure(object.font,object.dsize,object.text,object.width,object.height,object.depth)
                                pdf_literalcode("Q")
                            else
                                local cs = object.color
                                if cs and #cs > 0 then
                                    pdf_literalcode(luamplib.colorconverter(cs))
                                end
                                local ml = object.miterlimit
                                if ml and ml ~= miterlimit then
                                    miterlimit = ml
                                    pdf_literalcode("%f M",ml)
                                end
                                local lj = object.linejoin
                                if lj and lj ~= linejoin then
                                    linejoin = lj
                                    pdf_literalcode("%i j",lj)
                                end
                                local lc = object.linecap
                                if lc and lc ~= linecap then
                                    linecap = lc
                                    pdf_literalcode("%i J",lc)
                                end
                                local dl = object.dash
                                if dl then
                                    local d = format("[%s] %i d",concat(dl.dashes or {}," "),dl.offset)
                                    if d ~= dashed then
                                        dashed = d
                                        pdf_literalcode(dashed)
                                    end
                                elseif dashed then
                                   pdf_literalcode("[] 0 d")
                                   dashed = false
                                end
                                local path = object.path
                                local transformed, penwidth = false, 1
                                local open = path and path[1].left_type and path[#path].right_type
                                local pen = object.pen
                                if pen then
                                   if pen.type == 'elliptical' then
                                        transformed, penwidth = pen_characteristics(object) -- boolean, value
                                        pdf_literalcode("%f w",penwidth)
                                        if objecttype == 'fill' then
                                            objecttype = 'both'
                                        end
                                   else -- calculated by mplib itself
                                        objecttype = 'fill'
                                   end
                                end
                                if transformed then
                                    pdf_literalcode("q")
                                end
                                if path then
                                    if transformed then
                                        flushconcatpath(path,open)
                                    else
                                        flushnormalpath(path,open)
                                    end
                                    if objecttype == "fill" then
                                        pdf_literalcode("h f")
                                    elseif objecttype == "outline" then
                                        pdf_literalcode((open and "S") or "h S")
                                    elseif objecttype == "both" then
                                        pdf_literalcode("h B")
                                    end
                                end
                                if transformed then
                                    pdf_literalcode("Q")
                                end
                                local path = object.htap
                                if path then
                                    if transformed then
                                        pdf_literalcode("q")
                                    end
                                    if transformed then
                                        flushconcatpath(path,open)
                                    else
                                        flushnormalpath(path,open)
                                    end
                                    if objecttype == "fill" then
                                        pdf_literalcode("h f")
                                    elseif objecttype == "outline" then
                                        pdf_literalcode((open and "S") or "h S")
                                    elseif objecttype == "both" then
                                        pdf_literalcode("h B")
                                    end
                                    if transformed then
                                        pdf_literalcode("Q")
                                    end
                                end
                                if cr then
                                    pdf_literalcode(cr)
                                end
                            end
                       end
                    end
                    pdf_literalcode("Q")
                    pdf_stopfigure()
                end
            end
        end
    end
end

function luamplib.colorconverter(cr)
    local n = #cr
    if n == 4 then
        local c, m, y, k = cr[1], cr[2], cr[3], cr[4]
        return format("%.3f %.3f %.3f %.3f k %.3f %.3f %.3f %.3f K",c,m,y,k,c,m,y,k), "0 g 0 G"
    elseif n == 3 then
        local r, g, b = cr[1], cr[2], cr[3]
        return format("%.3f %.3f %.3f rg %.3f %.3f %.3f RG",r,g,b,r,g,b), "0 g 0 G"
    else
        local s = cr[1]
        return format("%.3f g %.3f G",s,s), "0 g 0 G"
    end
end
%    \end{macrocode}
%
% \iffalse
%</lua>
% \fi
%
% \subsection{\texttt{luamplib.sty}}
%
% \iffalse
%<*package>
% \fi
%
%
%    First we need to load fancyvrb, to define the environment mplibcode.
%
%    \begin{macrocode}

\expandafter\ifx\csname ProvidesPackage\endcsname\relax
  \input luatexbase-modutils.sty
\else
  \NeedsTeXFormat{LaTeX2e}
  \ProvidesPackage{luamplib}
    [2010/05/10 v1.03 mplib package for LuaTeX.]
  \RequirePackage{luatexbase-modutils}
  \RequirePackage{fancyvrb}
\fi

%    \end{macrocode}
% Loading of lua code.
%    \begin{macrocode}

\luatexUseModule{luamplib}

%    \end{macrocode}
%
%
%
%    There are (basically) two formats for metapost: \emph{plain} and
%    \emph{mpfun}. The corresponding \texttt{.mem} files are (at least will
%    be) \texttt{luatex-plain.mem} and \texttt{luatex-mpfun.mem} in \TeX Live.
%    With these functions you can set the format and the mem files that will
%    be used by this package. Warning: the package never generates the mem
%    files, you have to do it by hand, with \texttt{create-mem.lua}.
%
%    \begin{macrocode}

\def\mplibsetformat#1{\directlua{luamplib.setformat([[#1]])}}

\def\mplibsetmemfile#1{\directlua{luamplib.setmemfile([[#1]])}}

%    \end{macrocode}
%
%
%    MPLib only works in PDF mode, we don't do anything if we are in DVI mode,
%    and we output a warning.
%
%    \begin{macrocode}

\ifnum\pdfoutput>0
    \let\mplibtoPDF\pdfliteral
\else
    %\def\MPLIBtoPDF#1{\special{pdf:literal direct #1}} % not ok yet
    \def\mplibtoPDF#1{}
    \expandafter\ifx\csname PackageWarning\endcsname\relax
      \write16{}
      \write16{Warning: MPLib only works in PDF mode, no figure will be output.}
      \write16{}
    \else
      \PackageWarning{mplib}{MPLib only works in PDF mode, no figure will be output.}
    \fi
\fi

%    \end{macrocode}
%
%    The Plain-specific stuff.
%
%    \begin{macrocode}

\expandafter\ifx\csname ProvidesPackage\endcsname\relax

\def\mplibsetupcatcodes{
  \catcode`\{=12 \catcode`\}=12 \catcode`\#=12 \catcode`\^=12 \catcode`\~=12
  \catcode`\_=12 \catcode`\%=12 \catcode`\&=12 \catcode`\$=12 
}

\def\mplibcode{%
  \bgroup %
  \mplibsetupcatcodes %
  \mplibdocode %
}

\long\def\mplibdocode#1\endmplibcode{%
  \egroup %
  \mplibprocess{#1}%
}

\long\def\mplibprocess#1{%
  \directlua{luamplib.process([[#1]])}%
}

\else

%    \end{macrocode}
%    The \LaTeX-specific parts. First a Hack for the catcodes in \LaTeX .
%    \begin{macrocode}

\makeatletter
\begingroup
\catcode`\,=13
\catcode`\-=13
\gdef\FV@hack{%
  \def,{\string,}%
  \def-{\string-}%
}
\endgroup

%    \end{macrocode}
%    In \LaTeX\ (it's not the case in plain\TeX ), we get the metapost code
%    line by line, here is the function handling a line.
%    \begin{macrocode}

\newcommand\mplibaddlines[1]{%
  \begingroup %
  \FV@hack %
  \def\FV@ProcessLine##1{%
    \directlua{luamplib.addline([[##1]])}%
  }%
  \csname FV@SV@#1\endcsname %
  \endgroup %
}

\makeatother

%    \end{macrocode}
%    The \LaTeX\ environment is a modified \texttt{verbatim} environment.
%    \begin{macrocode}

\newenvironment{mplibcode}{%
  \VerbatimEnvironment %
  \begin{SaveVerbatim}{memoire}%
}{%
  \end{SaveVerbatim}%
  \mplibaddlines{memoire}%
  \luadirect{luamplib.processlines()}%
}

\fi

%    \end{macrocode}
%    We use a dedicated scratchbox.
%    \begin{macrocode}

\ifx\mplibscratchbox\undefined \newbox\mplibscratchbox \fi

%    \end{macrocode}
%    We encapsulate the litterals.
%    \begin{macrocode}

\def\mplibstarttoPDF#1#2#3#4{
  \hbox\bgroup
  \xdef\MPllx{#1}\xdef\MPlly{#2}%
  \xdef\MPurx{#3}\xdef\MPury{#4}%
  \xdef\MPwidth{\the\dimexpr#3bp-#1bp\relax}%
  \xdef\MPheight{\the\dimexpr#4bp-#2bp\relax}%
  \parskip0pt%
  \leftskip0pt%
  \parindent0pt%
  \everypar{}%
  \setbox\mplibscratchbox\vbox\bgroup
  \noindent
}

\def\mplibstoptoPDF{%
  \egroup %
  \setbox\mplibscratchbox\hbox %
    {\hskip-\MPllx bp%
     \raise-\MPlly bp%
     \box\mplibscratchbox}%
  \setbox\mplibscratchbox\vbox to \MPheight
    {\vfill
     \hsize\MPwidth
     \wd\mplibscratchbox0pt%
     \ht\mplibscratchbox0pt%
     \dp\mplibscratchbox0pt%
     \box\mplibscratchbox}%
  \wd\mplibscratchbox\MPwidth
  \ht\mplibscratchbox\MPheight
  \box\mplibscratchbox
  \egroup
}

%    \end{macrocode}
%    Text items have a special handler.
%    \begin{macrocode}

\def\mplibtextext#1#2#3#4#5{%
  \begingroup
  \setbox\mplibscratchbox\hbox
    {\font\temp=#1 at #2bp%
     \temp
     #3}%
  \setbox\mplibscratchbox\hbox
    {\hskip#4 bp%
     \raise#5 bp%
     \box\mplibscratchbox}%
  \wd\mplibscratchbox0pt%
  \ht\mplibscratchbox0pt%
  \dp\mplibscratchbox0pt%
  \box\mplibscratchbox
  \endgroup
}

%    \end{macrocode}
%
% \iffalse
%</package>
% \fi
%
% \iffalse
%<*gen-lua>
% \fi
%
% \subsection{\texttt{luamplib-createmem.lua}}
%
%    Finally a small standalone file to call with \texttt{texlua} that
%    generates \texttt{luatex-plain.mem} in the current directory. To generate
%    other formats in other names, simply change the last line. After the
%    \texttt{mem} generation, you'll have to install it in a directory
%    searchable by \TeX .
%
%    \begin{macrocode}

kpse.set_program_name("kpsewhich")

function finder (name, mode, ftype)
    if mode == "w" then
        return name
    else
        local result = kpse.find_file(name,ftype)
        return result
    end
end

local preamble = [[
input %s ; dump ;
]]

%    \end{macrocode}
%
%    \begin{macro}{makeformat}
%    \begin{macrocode}

makeformat = function (name, mem_name)
    local mpx = mplib.new {
        ini_version = true,
        find_file = finder,
        job_name =  mem_name,
        }
    if mpx then
        local result
        result = mpx:execute(string.format(preamble,name))
        print(string.format("dumping format %s in %s", name, mem_name))
        mpx:finish()
    end
end

makeformat("plain", "luatex-plain.mem")

%    \end{macrocode}
%    \end{macro}
% \iffalse
%</gen-lua>
% \fi
% \Finale
\endinput
