% \iffalse meta-comment % !TEX encoding = UTF-8 Unicode % % \fi % % \iffalse meta-comment % % Copyright (C) 2013--2017 by Ben Vitecek (current Maintainer) % % This work may be distributed and/or modified under the % conditions of the LaTeX Project Public License, either version 1.3c % of this license or (at your option) any later version. % The latest version of this license is in % http://www.latex-project.org/lppl.txt % and version 1.3c or later is part of all distributions of LaTeX % version 2005/12/01 or later. % % This work has the LPPL maintenance status `maintained'. % % This work consists of the files README.md, tikzsymbols.dtx, % tikzsymbols.ins and the derived files tikzsymbols.sty. % % \fi % % \iffalse %<*driver> \documentclass[onlydoc,11pt,english]{l3doc} \usepackage[utf8]{inputenc} \usepackage[T1]{fontenc} \usepackage{lmodern} \usepackage{babel} \usepackage{marvosym} \usepackage{microtype} \usepackage{longtable} \usepackage{booktabs} \usepackage{mathtools} \usepackage{tikzsymbols} \usepackage{xparse} \usepackage{marginnote} \usepackage{cleveref} \EnableCrossrefs %\CodelineIndex \RecordChanges \AtEndDocument { \PrintChanges \PrintIndex } %: Ganz oben \makeatletter \ExplSyntaxOn \newcommand\tikzsymbols{\Package{tikzsymbols}} \NewDocumentCommand{\definedBasicTree} { O{1} m m m m } { \group_begin: \__tikzsymbols_Basic_Tree_off:nnnnn {#1} {#2} {#3} {#4} {#5} \group_end: } \newcommand{\Package}{\pkg} \newcommand{\Option}{\texttt} \newcommand{\opt}{\texttt} \newcommand{\Makro}{\cs} \newcommand{\makrouse}[1]{\use:c{#1}} \renewcommand{\arg}[1]{\texttt{<#1>}} \newcommand{\Meta}[1]{\meta{#1}} \hfuzz=500pt \vbadness=\maxdimen \hbadness=\maxdimen \cs_new:Npn \CreateExample #1#2 { \tl_set_rescan:Nnn \l_tmpa_tl { \char_set_catcode_other:N \{ \char_set_catcode_other:N \} } {#2} \Makro{#1\l_tmpa_tl} \space \use:c {#1}#2 } \clist_new:N \printclist \cs_new:Npn \MapinTable { \clist_use:Nn \printclist { } } \clist_set_eq:NN \printclist \g_tikzsymbols_list_of_printing_cooking_with_argument_commands_clist \clist_if_exist:NF \printclist { \ERROR } \newcommand{\loadtime}{\marginpar{load-time}} \newcommand{\preamble}{\marginpar{preamble}} \newcommand{\preload}{\marginpar{load-time and preamble}} \NewDocumentEnvironment { myexample } { } { \medskip \noindent\textbf{Examples:} }{ } \NewDocumentEnvironment { mynote } { } { \medskip \noindent\textbf{Note:}% }{ } \ExplSyntaxOff \makeatother \begin{document} \DocInput{tikzsymbols.dtx} \end{document} % % \fi % % % \CharacterTable % {Upper-case \A\B\C\D\E\F\G\H\I\J\K\L\M\N\O\P\Q\R\S\T\U\V\W\X\Y\Z % Lower-case \a\b\c\d\e\f\g\h\i\j\k\l\m\n\o\p\q\r\s\t\u\v\w\x\y\z % Digits \0\1\2\3\4\5\6\7\8\9 % Exclamation \! Double quote \" Hash (number) \# % Dollar \$ Percent \% Ampersand \& % Acute accent \' Left paren \( Right paren \) % Asterisk \* Plus \+ Comma \, % Minus \- Point \. Solidus \/ % Colon \: Semicolon \; Less than \< % Equals \= Greater than \> Question mark \? % Commercial at \@ Left bracket \[ Backslash \\ % Right bracket \] Circumflex \^ Underscore \_ % Grave accent \` Left brace \{ Vertical bar \| % Right brace \} Tilde \~} % % % % % \iffalse meta-comment %: Changes % \fi % % % % % \GetFileInfo{tikzsymbols.sty} % % \iffalse meta-comment %: DoNotIndex % \fi % %\DoNotIndex {\begin{tikzpicture},\end{tikzpicture}} %\DoNotIndex {\verb, \DeclareRobustCommandx} %\DoNotIndex {=\verb} %\DoNotIndex {\verb||} %\DoNotIndex {\draw,\fill,\DeclareRobustCommand, \colorlet,\shade} %\DoNotIndex {\xspace,\begin,\end} % % % % % \begin{documentation} % % \title{The \Package{\jobname} package\thanks{This document corresponds to \textsf{\jobname}~\fileversion, dated~\filedate.}} % %\author{Ben Vitecek \\ % \href{mailto:b.vitecek@gmx.at}{b.vitecek@gmx.at} \\ % \href{https://github.com/Vidabe/tikzsymbols}{GitHub} % } % %^^A \date{August 19, 2017} % % \maketitle{} % % % % \begin{abstract} \centering % Some symbols created using \Package{tikz}. % % For differences between the releases % see \cref{sec:important-changes}. % % English is (still) not my native language so there (still) might be some % errors\footnote{They are -- of course -- on purpose (expect for % \enquote{avaiable} (sic!)).} \Winkey. % \end{abstract} % % \tableofcontents % % % \section{Introduction} % \label{sec:intro} % % \begin{comment} % As far as I can remember this package is a result of me writing a cooking book. % I wasn't able to find the symbols I wanted on CTAN and so I used \Package{tikz} % and my (sadly) very humble skills to develop the predecessor % called \Package{somesymbols}. Developing and making symbols % was a lot of fun and suddenly I had (badly coded) Emoticons, cooking-symbols % and other symbols. Somehow I got the idea of uploading them to CTAN % and wrote % % Well, % \end{comment} % % % As far as I can remember this package is the result of me writing a % cooking book\footnote{Well, it's one result, the other one is a cooking book.}. % Back then I wasn't able to find the cooking symbols I wanted and % using time, \Package{tikz}, lot's of magic % (also known as \enquote{programming}, but only if the respective person % knows what's going on) and a documentation in bad grammar\footnote{Not that it' now any better.} I somehow ended up with this package. % % During time \LaTeX3 became known to me and I started experimenting % and programming in this (I would say due to its simplicity compared to \LaTeXe\ % far superior) language. Well, long story short: I was impressed. % And so the idea of writing my package in \LaTeX3 was born. % % I finally took my time and started rewriting my code using \LaTeX3. % This process can be summarized as: \enquote{What \emph{does} this command?}, % \enquote{Why did I define \emph{this} command?} and % more generally \enquote{\emph{What} have I done?!} % Well, let's hope my code (and grammar) is better this time\footnote{Looking at own risk. % You have been warned.}. % % Well \dots\ that's it, have fun! % % % % \section{Important changes} % \label{sec:important-changes} % % The package should behave the same way as the \enquote{old} \LaTeXe\ release. % % \begin{description} % \item[2017] Option \Option{usebox} can be used during the document. % \item[old] The horribly named command % \Makro{tikzsymbolsaftersymbolinput} is not defined anymore by this % package. % Please use the new option \Option{after-symbol}, % in combination with the new command \Makro{tikzsymbolsset}, % see \cref{sec:options} for more information. % \item[very old] % The option \Option{draft=absolute} is now % obsolete and replaced by the much simpler option \Option{draft=true}. % \end{description} % % %^^A And a new Emoticon: \Makro{Changey} (and \Makro{dChangey}). % % % \section{Options} % \label{sec:options} % % ^^A All options but \Option{after-symbols} can be set as load-time % ^^A options and can be given inside the optional argument of % ^^A \Makro{usepackage}: % % % Options can either be set as package options or using % \Makro{tikzsymbolsset}. Some options can only be set as package % options, those are described in \cref{sec:glob-opt}. % % It is recommended to use the option \Option{draft=true} while % working on the document. % % \begin{function}{\tikzsymbolsset} % \begin{syntax} % \Makro{tikzsymbolsset} \marg{keys = values} % \end{syntax} % % Most keys, except % for the load-time options (\cref{sec:glob-opt}), can be % set using this command. % %^^A This command can only be used in the preamble and most keys, except %^^A for the load-time options (\cref{sec:glob-opt}), can be %^^A set using this command. % \end{function} % % % % \subsection{Load-time Options} % \label{sec:glob-opt} % % The following options \emph{cannot} be set using \Makro{tikzsymbolsset}. % % \subsubsection{marvosym (true/false)} % \label{sec:marvosym} % % \begin{syntax} % marvosym = true / false % \end{syntax} % % Please load \tikzsymbols\ % \emph{after} \Package{marvosym}. % % \Package{marvosym} also defines \Makro{Smiley} and % \Makro{Coffeecup}. If you prefer those symbols (\mvchr{169}, \mvchr{75}) over the % \tikzsymbols\ ones (\Smiley, \Coffeecup) you can use this option. If set to true % \Package{tikzsymbols} cancels the definition of its % \Makro{Smiley} and \Makro{Coffeecup}: % % \begin{center} % \begin{tabular}{ c c } % \toprule % Without option \enquote{marvosym}: \Smiley \Coffeecup & With % option \enquote{marvosym}: \mvchr{169} \mvchr{75}\\ \midrule % \verb|\usepackage{marvosym}| & \verb|\usepackage{marvosym}|\\ % \verb|\usepackage{tikzsymbols}| & % \verb|\usepackage[marvosym]{tikzsymbols}| \\ % \bottomrule % \end{tabular} % \end{center} % % % This option raises an error if set \Option{true} without loading package \Package{marvosym}. % % Can only be set as load-time option. % % You may also use the option \Option{prefix} (\cref{sec:prefix}). % % % \subsubsection{prefix (\arg{string})} % \label{sec:prefix} % % This option takes a string as value: \Option{prefix=\arg{string}} and % adds this prefix to every command defined by this package. So % setting \Option{prefix=} adds \arg{prefix} to all commands of % this package: \Makro{command}. % %\arg{prefix} should neither contain % any special characters (e.g., \"a, \"u, \ss, etc.) nor spaces. % % By default it is empty, so no prefix is given, if this option is given % without an argument \arg{prefix} is set to \Option{tikzsymbols}. % % Can only be set as a load-time option. % % For example: % % \begin{center} % \Makro{usepackage[prefix=tikzsym]\{tikzsymbols\}} % \end{center} % % defines \Makro{Smiley} as \Makro{tikzsymSmiley}, \Makro{Kochtopf} as % \Makro{tikzsymKochtopf}, \Makro{pot} as \Makro{tikzsympot}, etc. % % If you use this option or think about using this option the % following command may be handy: % % \begin{function}{\tikzsymbolsuse} % \begin{syntax} % \Makro{tikzsymbolsuse}\marg{Symbolname} % \end{syntax} % This command takes the name of the symbol \emph{without} % backslash and prints the symbol (or raises an error if the symbol % is not defined). Using this command you don't have to worry about % a \arg{prefix}, just write the command name and this command adds % automatically the given prefix to the command name. % % % \end{function} % % % \begin{myexample} % \Makro{tikzsymbolsuse\{Smiley\}[2]} \tikzsymbolsuse{Smiley}[2] % % \Makro{tikzsymbolsuse\{BasicTree\}[1.2]\{black\}\{red!50!black\}\{red\}\{leaf\}} % \tikzsymbolsuse{BasicTree}[1.2]{black}{red!50!black}{red}{leaf} % % % \Makro{tikzsymbolsuse\{Ofen\}} \tikzsymbolsuse{Ofen} % % \Makro{tikzsymbolsuse\{Fire\}[-1.3]} \tikzsymbolsuse{Fire}[-1.3] % % etc. % \end{myexample} % % \subsection{Normal Options} % \label{sec:pream-opt} % % Most of these options can be set either as a package-option or with % \Makro{tikzsymbolsset}. % % \subsubsection{draft (true/false)} % \label{sec:draft} % % \begin{function}{draft} % \begin{syntax} % draft = \arg{true/false} % \end{syntax} % % While working on the document it is recommended to set this option % to \Option{true} because creating many symbols may takes some time % to compile and by setting this option to \Option{true} the symbols % are replaced by plain vanilla rectangles (with the same height and width as % the symbols\footnote{At least I hope.}) which are faster to % create. % % The old option \Option{draft=absolute} is % obsolete and should therefore not be used. % % \end{function} % % \subsubsection{final (true/false)} % \label{sec:final} % % \begin{function}{final} % \begin{syntax} % final= \arg{true/false} % \end{syntax} % % This key has the opposite behavior of the option \Option{draft}. % % It is a boolean key and therefore accepts only \Option{true} or % \Option{false} and is set to \Option{true} by default. Setting it to % \Option{true} prints all symbols normally. Setting it to % \Option{false} prints plain vanilla draft-boxes instead which speeds % up the compile-process. % % \end{function} % % % % % \subsubsection{tree (true/false/on/off)} % \label{sec:tree} % % \begin{function}{tree} % \begin{syntax} % tree= \arg{true/on/false/off} % \end{syntax} % % This key accepts \Option{true}, \Option{false} and furthermore % \Option{on} and \Option{off} (for historical reasons). The latter do exactly the same as the % first ones. % % This option has only an effect on the command \Makro{BasicTree} % and its derivates (\Makro{Springtree}, \Makro{Summertree}, % \Makro{Autumntree} and \Makro{Wintertree}) and substitutes them with % \Package{tikz} drawn boxes. % % So while \Option{draft=true} replaces the output of \emph{all} commands with simple % black boxes, \Option{tree=true/on} only replaces the output of % \enquote{tree}-commands with boxes. % % It is recommended to use \Option{draft=true}, but if you want you % can use this option. % % \end{function} % % % % % \subsubsection{after-symbol (\arg{string or command})} % \label{sec:after-symbol} % % \begin{function}{after-symbol} % Is more stable if set using \Makro{tikzsymbolsset}. % \begin{syntax} % after-symbol = \marg{string or command} % \end{syntax} % The value of this key is inserted after every command of this % package. By default it is set to \Makro{xspace}. %^^A This command is more robust %^^A if used with \Makro{tikzsymbolsset} % \end{function} % % % \subsubsection{global-scale (\arg{number}) \\ % symbol-scale (\arg{key-value list})} % \label{sec:global-scale} % % \begin{function}{global-scale, symbol-scale} % \begin{syntax} % global-scale = \marg{number} % symbol-scale = \marg{symbol-1=number-1, symbol-2=number-2,\dots} % \end{syntax} % \opt{global-scale} can be used to scale \emph{all} commands by given \meta{number}. % % If only some specific symbols should be scaled, you may use the second option % and specify which symbol or symbols (name of the symbol without backslash) should be scaled. % Using the german name (if available) has the same effect as using the english one. % % \begin{mynote} % You can scale the symbols in this package in three different ways: The first % is to scale \emph{all} symbols using \opt{global-scale}, the second is scaling % specific symbols using \opt{symbol-scale} and the third is by using the % optional argument provided by the symbols (which I call \opt{local-scale}; e.g. % \verb|\Smiley[2]|). % % The important thing is that those scaling methods \emph{do not cancel} each % other, but behave multiplicative. % % If a local scale is given (e.g.\ \verb|\Smiley[2]|) with \opt{global-scale=3} % the resulting scaling will be $3\cdot 2=6$. Is furthermore this specific symbol % is also scaled (e.g. by $1.1$), the resulting scaling % (for this symbol) will be $3\cdot 1.1 \cdot 2=6.6$. % \end{mynote} % % \end{function} % % \begin{myexample} % \verb|\tikzsymbolsset{symbol-scale={ Smiley= 1.5 }}| % \tikzsymbolsset{symbol-scale={ Smiley= 1.5 }} % \Smiley \\ % \verb|\tikzsymbolsset{symbol-scale={ Smiley= 5 }}| % \tikzsymbolsset{symbol-scale={ Smiley= 5 }} % \Smiley \\ % \verb|\tikzsymbolsset{symbol-scale={ Smiley= 2, Schneebesen=2.1 }}| % \tikzsymbolsset{symbol-scale={ Smiley= 2, Schneebesen=2.1 }} % \Smiley \Schneebesen \\ % \verb|\tikzsymbolsset{global-scale=3,symbol-scale={ Smiley= 2, Schneebesen=2.1 }}| % \tikzsymbolsset{global-scale=3,symbol-scale={ Smiley= 2, Schneebesen=2.1 }} % \Smiley \Schneebesen % \end{myexample} % % \begin{mynote} % Using \enquote{eggbeater} instead of \enquote{Schneebesen} % does the same thing. % \end{mynote} % % \subsubsection{baseline (true/false)} % \label{sec:baseline} % % \begin{function}{baseline} % \begin{syntax} % baseline = \marg{true/false} % \end{syntax} % This option mainly exists to let the commands of this package work inside % \pkg{todonotes}' \cs{todo} command. If set to \Option{true} it adds to each symbol of this package % the tikz option \Option{baseline=default}. If you do not want this, set this option % to \Option{false}. It is set to \Option{true} by default. % \end{function} % % % \subsubsection{usebox (true/false)} % \label{sec:usebox} % % \begin{function}{usebox} % \begin{syntax} % usebox = \marg{true/false} % \end{syntax} % In \Package{tikzsymbols} all symbols are stored inside boxes % (\Makro{sbox}) and while I still have no idea what exactly happens, % it shortens the compilation time of the document. By % default this option is \Option{true}. % % The drawback is that \LaTeX\ has only a limited number of box % registers. If you come across an error message regarding boxes try setting \Option{usebox=false}. % \end{function} % % % % % % \section {Symbols} % % % In this section the symbols are introduced. % { They \Kochtopf \tiny all \dInnocey \Huge change \Moai \small automatically \Wintertree \large with \oven \normalsize text-size \Strichmaxerl. } % % % % % % % \subsection{Cooking-symbols \texorpdfstring{\Kochtopf}{Kochtopf}} % % % \begin{function} % { % \Kochtopf, % \pot, % \Bratpfanne, % \fryingpan, % \Schneebesen, % \eggbeater, % \Sieb, % \sieve, % \Purierstab, % \blender, % \Dreizack, % \trident, % \Backblech, % \bakingplate, % \Ofen, % \oven, % \Pfanne, % \pan, % \Herd, % \cooker, % \Saftpresse, % \squeezer, % \Schussel, % \bowl, % \Schaler, % \peeler, % \Reibe, % \grater, % \Flasche, % \bottle, % \Nudelholz, % \rollingpin % } % % The following table shows all available cooking-symbols and their % respective commands. % The first column shows the command-names (german \& english), % the second the optional parameter(s). % The optional parameter(s) are for both the german and the % english commands the same. % % \Meta{scale} can be a number between (not exactly) $-1400$ and % (also not exactly) $1400$, default is $1$. % % % Da Umlaute nicht in Befehlsnamen vorkommen dürfen, werden die Umlaute % \"o, \"a, \"u durch o, a, u ersetzt. % % \begin{longtable}{l l c@{~~}c} % \multicolumn{2}{l}{German \& English Commands} & Optional % parameter(s) & Output \\\toprule\endhead % \\ \bottomrule \endfoot % \MapinTable % \bottomrule % \end{longtable} % % % % % \end{function} % % % % % %\subsection{Emoticons \texorpdfstring{\Smiley}{Smiley}} % %\subsubsection{\enquote{Normal} Emoticons \texorpdfstring{\Cat}{Cat}} % % % % \begin{function} % { % \Smiley, % \Sadey, % \Neutrey, % \Changey, % \cChangey, % \Annoey, % \Laughey, % \Winkey, % \oldWinkey, % \Sey, % \Xey, % \Innocey, % \wInnocey, % \Cooley, % \Tongey, % \Nursey, % \Vomey, % \Walley, % \rWalley, % \Cat, % \SchrodingersCat, % \Ninja, % \Sleepey, % \NiceReapey % } % % First column shows the commands, the second the (optional) % parameter(s), the third the default-output (the only command with % a mandatory argument is \Makro{Changey}). % % \Meta{scale} can be a number between (not exactly) $-2000$ and (not % exactly) $2000$, ^^A{Do you even need so large symbols?}, % default is $1$. % % \Meta{color} can be every defined color. Note: The color names % shouldn't contain special characters like \ss, \"a, \"o, \dots % % \Makro{Changey}'s \Meta{mood} has to be between $-2$ and $2$ % ($1$ equals \Makro{Smiley}, $-1$ \Makro{Sadey} and $0$ \Makro{Neutrey}). % % \Makro{SchrodingersCat}'s \Meta{case} can either be $1$ (alive), $0$ (unknown) % or $-1$ (dead). % % \begin{longtable}{llc} % Commands & (Optional) parameter(s) & Output \\\toprule\endhead % % \bottomrule\endfoot % % % \Makro{Smiley}& \oarg{scale}\oarg{color} & \Smiley \\ % \Makro{Sadey}& \oarg{scale}\oarg{color} & \Sadey \\ % \Makro{Neutrey}& \oarg{scale}\oarg{color} & \Neutrey \\ % \Makro{Changey}& \oarg{scale}\oarg{color}\marg{mood} & \Changey{2} \\ % \Makro{cChangey}& \oarg{scale}\oarg{color1}\oarg{color2}\oarg{color3}\marg{mood} & \cChangey{2} \\ % \Makro{Annoey}& \oarg{scale}\oarg{color} & \Annoey \\ % \Makro{Laughey}& \oarg{scale}\oarg{color}\oarg{mouth color} & \Laughey \\ % \Makro{Winkey}& \oarg{scale}\oarg{color} & \Winkey \\ % \Makro{oldWinkey}& \oarg{scale}\oarg{color} & \oldWinkey \\ % \Makro{Sey}& \oarg{scale}\oarg{color} & \Sey \\ % \Makro{Xey}& \oarg{scale}\oarg{color} & \Xey \\ % \Makro{Innocey}& \oarg{scale}\oarg{color}\oarg{halo color} & \Innocey \\ % \Makro{wInnocey}& \oarg{scale} & \wInnocey \\ % \Makro{Cooley}& \oarg{scale}\oarg{color} & \Cooley \\ % \Makro{Tongey}& \oarg{scale}\oarg{color}\oarg{tongue color} & \Tongey \\ % \Makro{Nursey}& \oarg{scale}\oarg{color}\oarg{cap color}\oarg{cross color} &\Nursey \\ % \Makro{Vomey}& \oarg{scale}\oarg{color}\oarg{vomit color} & \Vomey \\ % \Makro{Walley}& \oarg{scale}\oarg{color}\oarg{wall color} & \Walley \\ % \Makro{rWalley}\marginnote{\enquote{r} for \enquote{random generated cracks}.}& \oarg{scale}\oarg{color}\oarg{wall color} & \rWalley \\ % \Makro{Cat}& \oarg{scale}& \Cat \\ % \Makro{SchrodingersCat}& \oarg{scale}\marg{case}& \SchrodingersCat{0} \\ % \Makro{Ninja}& \oarg{scale}\oarg{color}\oarg{headband color}\oarg{eye color}& \Ninja \\ % \Makro{Sleepey}& \oarg{scale}\oarg{color}\oarg{cap color}\oarg{star color}& \Sleepey \\ % \Makro{NiceReapey} & \oarg{scale} & \NiceReapey \\ % \bottomrule % \end{longtable} % % % % \end{function} % % Examples: \CreateExample{Sadey}{[][red]} % % \CreateExample{Cooley} {[-3][cyan]} % % \CreateExample{Vomey}{[1.5][green!80!black][olive]} % % \CreateExample{Nursey}{[][yellow][blue][red]}. % % \CreateExample{Ninja}{[1.3][][violet][red]}. % % \verb|\colorbox{yellow}{\Winkey \Annoey[-1]\Neutrey}|\colorbox{yellow}{\Winkey \Annoey [-1]\Neutrey} % % \verb|\textcolor{blue}{\Sey}| \textcolor{blue}{\Sey} % % \CreateExample{Sleepey} {[1][white][blue][yellow!95!black]} % % \CreateExample{SchrodingersCat} {{1}} \par % \CreateExample{SchrodingersCat} {{0}}\par % \CreateExample{SchrodingersCat} {{-1}} % % \CreateExample{Changey} {{-2}} % \CreateExample{Changey} {{-1.367}} % \CreateExample{Changey} {{-1}} % \CreateExample{Changey} {{0}} % \CreateExample{Changey} {{1}} % \CreateExample{Changey} {{1.41}} % \CreateExample{Changey} {{2}} % % \CreateExample{cChangey} {{2}} % \CreateExample{cChangey} {{1}} % \CreateExample{cChangey} {{0.5}} % \CreateExample{cChangey} {{0.1}} % \CreateExample{cChangey} {{0}} % \CreateExample{cChangey} {{-0.5}} % \CreateExample{cChangey} {{-1}} % \CreateExample{cChangey} {{-2}} % % \CreateExample{cChangey} {[][][blue]{-1}} % \CreateExample{cChangey} {[][][blue]{0.5}} % % If you intent to change the color of \cs{cChangey} you may define a new command % so that you do not have to write those brackets each time. % % % \subsubsection{\enquote{3D} Emoticons \texorpdfstring{\dSmiley\dSadey[-1]}{dSmiley dSadey}} % % % \begin{function} % { % \dSmiley, % \dSadey, % \dNeutrey, % \dChangey, % \dcChangey, % \dAnnoey, % \dLaughey, % \dWinkey, % \dSey, % \dXey, % \dInnocey, % \dCooley, % \dNinja, % \drWalley, % \dWalley, % \dVomey, % \dNursey, % \dTongey, % \dSleepey, % \olddWinkey % } % % % % First column shows the commands (note: the \enquote{3D} Emoticons % begin with \Makro{d\dots}), the second shows the (optional) % parameter(s), the third shows the default-output (the only command % with a mandatory argument is \Makro{dChangey}). % % \Meta{scale} can be a number between a small number (under % $-500$ for sure) and a large number (over 500 for sure), % default is $1$. % % \Meta{color} can be every defined color (see examples below). Note: % The color names shouldn't contain special characters like \ss, \"a, % \"o, \dots % % \Makro{Changey}'s \meta{mood} has to be between $-2$ and $2$ % ($1$ equals \Makro{dSmiley}, $-1$ \Makro{dSadey} and $0$ \Makro{dNeutrey}). % % \begin{longtable}{llc} % Commands & Optional parameter(s) & Output \\\toprule\endhead % % \bottomrule\endfoot % % \Makro{dSmiley}& \oarg{scale}\oarg{color} & \dSmiley \\ % \Makro{dSadey}& \oarg{scale}\oarg{color} & \dSadey \\ % \Makro{dNeutrey}& \oarg{scale}\oarg{color} & \dNeutrey \\ % \Makro{dChangey}& \oarg{scale}\oarg{color}\marg{mood} & \dChangey{2} \\ % \Makro{dcChangey}& \oarg{scale}\oarg{color1}\oarg{color2}\oarg{color3}\marg{mood} & \dcChangey{2} \\ % \Makro{dLaughey}& \oarg{scale}\oarg{color}\oarg{mouth color} & \dLaughey \\ % \Makro{dAnnoey}& \oarg{scale}\oarg{color} & \dAnnoey \\ % \Makro{dWinkey}& \oarg{scale}\oarg{color} & \dWinkey \\ % \Makro{olddWinkey}& \oarg{scale}\oarg{color} & \olddWinkey \\ % \Makro{dSey}& \oarg{scale}\oarg{color} & \dSey \\ % \Makro{dXey}& \oarg{scale}\oarg{color} & \dXey \\ % \Makro{dInnocey}& \oarg{scale}\oarg{color}\oarg{halo color} & \dInnocey \\ % \Makro{dCooley}& \oarg{scale}\oarg{color} & \dCooley \\ % \Makro{dTongey}& \oarg{scale}\oarg{color}\oarg{tongue color} & \dTongey \\ % \Makro{dNursey}& \oarg{scale}\oarg{color}\oarg{cap color}\oarg{cross color} & \dNursey \\ % \Makro{dVomey}& \oarg{scale}\oarg{color}\oarg{vomit color} & \dVomey \\ % \Makro{dWalley}& \oarg{scale}\oarg{color}\oarg{wall color} & \dWalley \\ % \Makro{drWalley}\marginnote{\enquote{r} for \enquote{random generated cracks}.}& \oarg{scale}\oarg{color}\oarg{wall color}& \drWalley \\ % \Makro{dNinja}& \oarg{scale}\oarg{color}\oarg{headband color}\oarg{eye color} & \dNinja \\ % \Makro{dSleepey}& \oarg{scale}\oarg{color}\oarg{cap color}\oarg{star color}& \dSleepey \\ % \bottomrule % \end{longtable} % % \end{function} % % % Examples: % \CreateExample{dSadey}{[][red]} % % \CreateExample{dCooley}{[-3][cyan]} % % \CreateExample{dVomey}{[1.5][green!70!black][olive]} % % \CreateExample{dNursey}{[][yellow][blue][red]}. % % \CreateExample{dNinja}{[1.3][][violet][red]}. % % \CreateExample{dChangey} {{-2}} % \CreateExample{dChangey} {{-1.367}} % \CreateExample{dChangey} {{-1}} % \CreateExample{dChangey} {{0}} % \CreateExample{dChangey} {{1}} % \CreateExample{dChangey} {{1.41}} % \CreateExample{dChangey} {{2}} % % % \CreateExample{dcChangey} {{2}} % \CreateExample{dcChangey} {{1}} % \CreateExample{dcChangey} {{0.5}} % \CreateExample{dcChangey} {{0.1}} % \CreateExample{dcChangey} {{0}} % \CreateExample{dcChangey} {{-0.5}} % \CreateExample{dcChangey} {{-1}} % \CreateExample{dcChangey} {{-2}} % % \CreateExample{dcChangey} {[][][blue]{-1}} % \CreateExample{dcChangey} {[][][blue]{0.5}} % % If you intent to change the color of \cs{dcChangey} you may define a new command % so that you do not have to write those brackets each time. % % \subsection{Other Symbols \texorpdfstring{\Moai}{Moai}} % % \begin{function} % { % \Strichmaxerl, % \Candle, % \Fire, % \Coffeecup, % \Chair, % \Bed, % \Tribar, % \Moai, % \Snowman % } % % \Makro{Strichmaxerl}'s optional parameters 2--5 (\Meta{left arm} to % \Meta{right leg}) can be a number % between $-360$ and $360$ (of course the number can be even % greater or even smaller.). The parameters are % the angles between the body and the separate parts of % \Makro{Strichmaxerl} (see examples). % % \Meta{scale} can be a very great and a very small negative number (but I % don't think, that you need so large symbols). % % \Meta{color} can be every defined color. Note: The color names % shouldn't contain special characters like \ss, \"a, \"o, \dots. % % \begin{longtable}{llc} % Commands & Optional parameter(s) & Output \\\toprule\endhead % % \bottomrule\endfoot % % \Makro{Strichmaxerl} & \oarg{scale}\oarg{left arm}\oarg{right arm}\oarg{left leg}\oarg{right leg} &\Strichmaxerl\\ % \Makro{Candle} & \oarg{scale} & \Candle\\ % \Makro{Fire} & \oarg{scale} & \Fire\\ % \Makro{Coffeecup} & \oarg{scale} & \Coffeecup\\ % \Makro{Chair} & \oarg{scale} & \Chair\\ % \Makro{Bed} & \oarg{scale} & \Bed\\ % \Makro{Moai} & \oarg{scale} & \Moai\\ % \Makro{Tribar} &\oarg{scale}\oarg{color 1}\oarg{color 2}\oarg{color 3} & \Tribar\\ % \Makro{Snowman} &\oarg{scale} & \Snowman\\ % \bottomrule % \end{longtable} % % % \end{function} % % \CreateExample{Tribar}{[-10][blue][red][green]} % % \CreateExample{Tribar}{[2.1][blue][blue!50][blue!20]} % % \vspace{1ex} % % \CreateExample{Strichmaxerl}{[1][10][30][40][4]} , % % \CreateExample{Strichmaxerl}{[1.4][210][310][10][90]} , % % \CreateExample{Strichmaxerl}{[2][510][110][190][990]} , % % \CreateExample{Strichmaxerl}{[0.9][54][28][95][16]} % % \CreateExample{Strichmaxerl}{[][54][28]} % % % % \begin{function} % { % \BasicTree , % \Springtree , % \Summertree , % \Wintertree , % \WorstTree , % } % % \subsection{Trees \texorpdfstring{\BasicTree{blue!60!black}{red}{green}{leaf}}{BasicTree}}\label{Trees} % % \Meta{scale} can be a number between (not exactly) $-900$ and (again % not exactly) $900$, default is % $1$. % % \Meta{color} can be every defined color (see examples below). Note: % The color names shouldn't contain special characters like \ss, \"a, % \"o, \dots. % % \marg{leaf} uses the colors of \marg{leaf color a} % and \marg{leaf color b}, you can leave this one empty if you don't % want leaves (\verb|\Wintertree| is without \emph{leaf}, see examples % below). % % If you are using those trees, \LaTeX{} needs longer to produce the % output. So you may use the package option \Option{tree=off}, % or (better) \Option{draft=true} (see section % \cref{sec:draft} and \cref{sec:tree}) to make \LaTeX{} faster. % % Furthermore those trees are pretty much stolen from the % \Package{tikz} manual. % % \begin{center} % \begin{tabular}{@{}llc@{}} % Commands & Optional/Needed parameter(s) & Output % \\\toprule % % % \Makro{BasicTree} & \oarg{scale}\marg{trunk color}\marg{leaf color a}\marg{leaf color b}\marg{leaf} & see below \\ % % \Makro{Springtree} & \oarg{scale} & \Springtree \\ % \Makro{Summertree} & \oarg{scale} & \Summertree \\ % \Makro{Autumntree} & \oarg{scale} & \Autumntree \\ % \Makro{Wintertree} & \oarg{scale} & \Wintertree \\ % \Makro{WorstTree} & \oarg{scale} & \WorstTree \\ % \bottomrule % \end{tabular} % \end{center} % % \end{function} % % \paragraph{\Makro{BasicTree} examples} Some \enquote{normal} trees: % % \verb|\colorbox{green}{\BasicTree{red}{orange}{yellow}{leaf}}|\colorbox{green}{\BasicTree{red}{orange}{yellow}{leaf}} % % \CreateExample{BasicTree}{[5]{orange!95!black}{orange!80!black}{orange!70!black}{leaf}} % % \CreateExample{BasicTree}{[2]{blue!65!white}{cyan!50!white}{cyan!50!white}{}} % % \CreateExample{BasicTree}{[-1.54]{green!20!black}{green!50!black}{green!70!black}{leaf}} % % \verb|\colorbox{black}{\BasicTree[3.75]{gray!80}{gray!50}{gray!40}{leaf}}| % \colorbox{black}{\BasicTree[3.75]{gray!80}{gray!50}{gray!40}{leaf}} % % \paragraph{draftbox \Makro{BasicTree} examples} Some \enquote{draftbox} trees % (using \Option{tree=false}): % % \dots and using the same trees with \Option{tree=off/false} or \Option{draft}(\Option{=true}): % % \verb|\colorbox{green}{\BasicTree{red}{orange}{yellow}{leaf}}| % \colorbox{green}{\definedBasicTree{red}{orange}{yellow}{leaf}} % % \verb|\BasicTree[5]{orange!95!black}{orange!80!black}{orange!70!black}{leaf}| % \definedBasicTree[5]{orange!95!black}{orange!80!black}{orange!70!black}{leaf} % % \verb|\BasicTree[2]{blue!65!white}{cyan!50!white}{cyan!50!white}{}| % \definedBasicTree[2]{blue!65!white}{cyan!50!white}{cyan!50!white}{} % % \verb|\BasicTree[-1.54]{green!20!black}{green!50!black}{green!70!black}{leaf}| % \definedBasicTree[-1.54]{green!20!black}{green!50!black}{green!70!black}{leaf} % % \verb|\colorbox{black}{\BasicTree[3.75]{gray!80}{gray!50}{gray!40}{leaf}}| \colorbox{black}{\definedBasicTree[3.75]{gray!80}{gray!50}{gray!40}{leaf}} % % \bigskip % % I think it's better if you define your own trees using \verb|\newcommand| and \verb|\BasicTree|: %\begin{verbatim} % \newcommand{\Myicetree}[1][1]{% % \BasicTree[#1]{blue!65!white}{cyan!50!white}{cyan!50!white}{}} % \end{verbatim} % % % % \section{Known errors \& Problems} % % \subsection*{marvosym} % Make sure you load \Package{marvosym} \emph{before} % \Package{tikzsymbols} because both packages define \verb|\Smiley|, % \Package{marvosym} via \verb|\newcommand| \tikzsymbols\ via % \Makro{DeclareDocumentCommand}. % % If you load \Package{marvosym} \emph{after} \tikzsymbols, % \LaTeX{} generates an error-message because \verb|\Smiley| has % already been defined. % % If you load \Package{marvosym} \emph{before} \tikzsymbols, % \Package{tikzsymbols} will overwrite \Package{marvosym}'s Smiley (and Coffeecup) and no % error-message is generated (if you like the \verb|\Smiley| from % marvosym more, use the \tikzsymbols{} option \verb|marvosym| % or \Option{prefix}). % % \subsection*{babel} % % If you encounter an error message like % \begin{verbatim} % Argument of \pgffor@next has an extra } % \end{verbatim} % while using \pkg{babel} with e.g. language \enquote{francais} % and for example \cs{Cooley} you may add % \begin{verbatim} % \usetikzlibrary{babel} % \end{verbatim} % to your preamble. This should (hopefully) fix the problem. % % \section{Nobody is perfect} % % If you find a bug please send me a mail (or report it on GitHub) % involving a \emph{minimal example} % showing the bug and a short description (english or german). % Please mention (if you are writing % a mail) % \enquote{\Package{tikzsymbols}} in the header, \enquote{gmx} has % a habit of putting mails into the spam-folder % and it helps me to recognize those mails faster. % This can also be the reason why I may need some time to answer % the mail. % % Suggestions are also welcome. % % % % % % \section{Danksagung} % % I would like to thank all users for providing bug reports % and helping to improve this package. % % Furthermore many thanks to my brother helping me improving % the symbols. % % \section{Changes} % % See the \enquote{README.md} file. % % % \end{documentation} % \begin{implementation} % % \iffalse meta-comment %: subsec: Code % \fi % % There is not much to see, all this symbols were created with \Package{tikz}. % But it may helps you (somehow). % % PS. Enter at own risk, bad code and grammar up ahead. % % % % % % % \section{\LaTeX3 code} % %\iffalse % !TEX root = tikzsymbols.dtx % !TEX encoding = UTF-8 Unicode %\fi % % % \begin{macrocode} %<@@=tikzsymbols> % \end{macrocode} % %\changes {v1.0} {2013/01/19} {Initial version} %\changes {v1.05} {2013/02/13} {Deleted a \enquote{t} in the BasicTree-code, shortened the trunk from the tree a bit, renamed some codes, made an index} %\changes {v1.6} {2013/02/14} {Now \enquote{Person} can be used in sections, etc.} %\changes {v1.6} {2013/02/14} {Now an error message is generated if the last parameter of \enquote{BasicTree} is neither \enquote{leaf} nor empty.} %\changes {v1.6} {2013/02/14} { New options: draft and final. If in documentclass the option \enquote{draft} is defined, the package recognizes it. Plus some warnings if you use class option draft/final with package option tree=on/off.} %\changes {v1.6} {2013/02/14} { Renamed \enquote{tikzsymbolsaftersymbolinput} to \enquote{tikzsymbolsaftersymbolinput}} %\changes {v1.61} {2013/02/17} {Made an invisible box in BasicTree.} %\changes {v1.65} {2013/02/17} {Improved BasicTree; New symbols \enquote{Schaler/peeler}, Laughey, Walley, Ninja; but didn't improve the source-description} %\changes {v1.7} {2013/02/28} {New symbols, etc.} %\changes {v2.0} {2013/03/07} {Fixed Bugs, improved BasicTree, new option \enquote{marvosym}, new symbol} %\changes {v2.2} {2013/03/23} {Now you can use negative scaling. Include \Makro{@ifpackageloaded}. Did something else, I can't remember} %\changes {v2.5} {2013/04/18} {New option: draftabsolute, changed the documentation a bit} %\changes {v3.0} {2013/07/21} {Changed the documentation} %\changes {v3.0} {2013/07/21} {Replaced \cs{let} by \cs{tikzsymbols@let}} % \changes{v3.0}{2013/07/21}{Changed symbol code} % \changes{v3.0}{2013/07/26}{Using \cs{changes{}{}{}} correctly (hopefully)} % \changes{v3.0}{2013/07/21}{Changed output of \enquote{absolute} option} % \changes{v3.0b}{2014/10/19}{Deleted non ASCII characters in der .sty file.} % \changes{v3.0d}{2014/10/29}{\cs{tikzsymbolsscl} to \cs{tikzsymbols@scl}} % \changes{v3.0e}{2014/10/29}{\cs{tikzsymbolsDeclareRobustCommand} to \cs{tikzsymbols@Declare@Robust@Command}} % \changes{v3.0f}{2014/10/29}{\cs{tikzsymbolsbxPrmtrstore} to \cs{tikzsymbols@bx@Prmtrstore}} % % \changes{v3.0g}{2015/10/01}{Deleted package \Package{calc}, using now \cs{pgfmathsetlength} instead of \cs{setlength}.} % % \changes{v3.0h}{2015/10/13}{Added a missing \cs{fi} into the code. } % % \changes{v3.01alpha}{2015/10/03}{Started from new using \LaTeX3} % % \changes{v3.38}{2015/10/03}{Nearly finished translating the code to % \LaTeX3. Himmel! Das war einfach nur zach! Muss aber noch den % \LaTeXe\ Code löschen.} % % \changes{v3.40}{2015/10/03}{Now everything is written in \LaTeX3.} % % \changes{v3.50}{2015/10/03}{Now it compiles without error (without % using any command or options.)} % % \changes{v3.58}{2015/10/04}{Fixed every error occurring while using % the symbols without optional arguments and package % options. Something is still wrong with \cs{@@_Basic_Tree_off:nnnnn}} % % \changes{v3.60}{2015/10/05}{Fixed \cs{@@_Basic_Tree_off:nnnnn}} % % \changes{v3.70}{2015/10/05}{Now every draftbox has the correct % size.} % % \changes{v3.75}{2015/10/05}{\cs{tikzsymbolsuse} works now.} % % \changes{v3.9}{2015/10/8}{Various fixes, new command \Makro{tikzsymbolsuse} and started to write a new documentation.} % \changes{v3.95}{2016/03/20}{Removed the only-preambility of \Makro{tikzsymbolsset}.} % \changes{v3.95}{2016/03/20}{Changed name of key-group from 'preamble' to % 'document'.} % % \changes{v3.9}{2016/04/04}{Added \Makro{@ifackagelater}.} % \changes{v3.99}{2016/04/04}{As advised undid my version-resetting.} % \changes{v4.0}{2016/03/20}{Finished reworking the code.} % \changes{v4.0}{2016/26/12}{Added \cs{Nudelholz} bzw. \cs{rollingpin}.} % % \changes{v4.02}{2017/05/14}{Added option 'baseline=true/false' to fix a some strange % behaviors with \pkg{todonotes}.} % \changes{v4.02}{2017/05/14}{Defined the tikz-style '/\_\_tikzsymbols' which is used to implement 'baseline'.} % % \changes{v4.03}{2017/08/08}{New symbols: \cs{Sleepey} and \cs{dSleepey}.} % \changes{v4.04}{2017/08/08}{New symbol: \cs{SchrodingersCat}.} % % The first lines are always the same: What do I need, what is the % package named. % \begin{macrocode} \@ifpackageloaded{xparse}{}{\RequirePackage{xparse}} \@ifpackageloaded{expl3}{}{\RequirePackage{expl3}} \@ifpackagelater{expl3}{2017/04/01} {} {% \PackageError { tikzsymbols }{ Support~package~expl3~too~old } {% You~need~to~update~your~installation~of~the~bundles~'l3kernel'~and~ 'l3packages'.\MessageBreak Loading~tikzsymbols~will~abort! }% \endinput } \ProvidesExplPackage {tikzsymbols} {2017/09/05} {4.07} {Some symbols created using tikz and LaTeX3.} \@ifpackageloaded { tikz } {} { \RequirePackage { tikz } } \@ifpackageloaded { xcolor } {} { \RequirePackage { xcolor } } \@ifpackageloaded { xspace } {} { \RequirePackage { xspace } } \@ifpackageloaded { l3keys2e } {} { \RequirePackage { l3keys2e } } % \end{macrocode} % % Furthermore we need to load some libraries from \Package{tikz}, I % hope these \Makro{ExplSyntax...} don't break anything. % \begin{macrocode} \ExplSyntaxOff \usetikzlibrary {arrows,decorations.pathmorphing,trees} \ExplSyntaxOn % \end{macrocode} % % % \begin{macro}{ % \l_@@_if_scale_negative_bool , % \g_@@_if_opt_tree_print_bool , % \g_@@_if_opt_draft_bool , % \g_@@_if_opt_marvosym_bool , % } % Booleans we later need, \cs{l_@@_if_scale_negative_bool} is set true % in symbols which need some extra code if the scaling is negative % (like \verb|\Chair|). The other booleans are used for the package % options and are therefor globally. % \begin{macrocode} \bool_new:N \l_@@_if_scale_negative_bool \bool_new:N \g_@@_if_opt_tree_print_bool \bool_new:N \g_@@_if_opt_draft_bool \bool_new:N \g_@@_if_opt_marvosym_bool % \end{macrocode} % \end{macro} % % Setting some of them to true by default. % \begin{macrocode} \bool_gset_true:N \g_@@_if_opt_tree_print_bool % \end{macrocode} % % % % % \begin{macro}{ % \g_@@_command_prefix_tl , % \l_@@_tikzsymbols_after_symbol_tl , % \g_@@_current_situation_tl , % \g_@@_scale_abs_tl , % \c_@@_leaf_tl , % \c_@@_black_tl , % } % % I think the names speak for themselves, % \cs{g_@@_command_prefix_tl} is used in the option \Option{prefix} % and adds its content to the command names as a prefix, by default % it is empty. % % \Makro{g_tikzsymbols_after_symbol_tl} adds its content to the % document after the symbol is used. % % In \Makro{l_@@_current_situation} is a storage for the % current font-size and color-configurations which is needed when % defining boxes. % % \Makro{l_@@_scale_abs_tl} safes absolute scaling of a symbol; % could have used \Makro{l_tmpa_tl}. It is a \texttt{tl} because % using a \texttt{fp} would have required me to use % \Makro{fp_use:N} every time. I'm lazy, I know. % % The last two are constants and are used to check user specific % input at some commands (\Makro{BasicTree} and \Makro{Ninja} I believe). % \begin{macrocode} \tl_clear_new:N \g_@@_command_prefix_tl \tl_new:N \l_@@_tikzsymbols_after_symbol_tl \tl_new:N \l_@@_current_situation_tl \tl_new:N \l_@@_scale_abs_tl \tl_const:Nn \c_@@_leaf_tl { leaf } \tl_const:Nn \c_@@_black_tl { black } % \end{macrocode} % \end{macro} % % Setting the default value and yes, I know that you maybe should not % use \Makro{xspace}, but I do it anyway: % \begin{macrocode} \tl_gset:Nn \l_@@_tikzsymbols_after_symbol_tl { \xspace } % \end{macrocode} % % \begin{macrocode} \tl_new:N \l_@@_used_only_once_because_no_better_idea_tl % \end{macrocode} % % \begin{macrocode} \fp_new:N \l_@@_global_scale_fp \fp_set:Nn \l_@@_global_scale_fp { 1.0 } % \end{macrocode} % % % \begin{macro}{\tikzsymbolsaftersymbolinput} % An obsolete macro. Is not defined anymore. % \begin{macrocode} %\cs_set_eq:NN \tikzsymbolsaftersymbolinput {} % \end{macrocode} % \end{macro} % % \begin{macro}{ % \l_@@_Strichmaxerl_x_LA_fp , % \l_@@_Strichmaxerl_x_RA_fp, % \l_@@_Strichmaxerl_x_LB_fp, % \l_@@_Strichmaxerl_x_RB_fp, % \l_@@_Strichmaxerl_y_LA_fp, % \l_@@_Strichmaxerl_y_RA_fp, % \l_@@_Strichmaxerl_y_LB_fp, % \l_@@_Strichmaxerl_y_RB_fp, % \@@_Strichmaxerl_x_max_fp, % \@@_Strichmaxerl_x_min_fp, % } % % Needed for the plain vanilla boxes of \Makro{Strichmaxerl} for % the length (\texttt{x}) and height (\texttt{y}). % \begin{macrocode} \fp_new:N \l_@@_Strichmaxerl_x_LA_fp \fp_new:N \l_@@_Strichmaxerl_x_RA_fp \fp_new:N \l_@@_Strichmaxerl_x_LB_fp \fp_new:N \l_@@_Strichmaxerl_x_RB_fp % \end{macrocode} % \begin{macrocode} \fp_new:N \l_@@_Strichmaxerl_y_LA_fp \fp_new:N \l_@@_Strichmaxerl_y_RA_fp \fp_new:N \l_@@_Strichmaxerl_y_LB_fp \fp_new:N \l_@@_Strichmaxerl_y_RB_fp % \end{macrocode} % \begin{macrocode} \fp_new:N \@@_Strichmaxerl_x_max_fp \fp_new:N \@@_Strichmaxerl_x_min_fp % \end{macrocode} % \end{macro} % % % % % % \begin{macro} { \l_@@_Moai_thickness_dim } % % It is used inside \Makro{Moai}. I figured that depending % on the scaling the line-thickness of \Makro{Moai} should change % its value (bad explained, please just look at the code). % % \begin{macrocode} \dim_new:N \l_@@_Moai_thickness_dim % \end{macrocode} % \end{macro} % % % \begin{macro} { \g_tikzsymbols_list_of_printing_cooking_with_argument_commands_clist } % Store every command defined by this package. I may delete them. % \begin{macrocode} \clist_new:N \g_tikzsymbols_list_of_printing_cooking_with_argument_commands_clist % \end{macrocode} % \end{macro} % % \begin{macro}{ \g_@@_english_commands_prop } % \begin{macrocode} \prop_new:N \g_@@_english_commands_prop % \end{macrocode} % \end{macro} % % % \subsection{Messages} % % Nothing special happens in this subsection. % % \begin{macro}{ obsolete-option } % Message for obsolete options. % \begin{macrocode} \msg_new:nnnn { tikzsymbols } { obsolete-option } { Option \ '#1' \ is \ obsolete. \ Please \ use \ '#2' \ instead. }{ The \ option \ you \ used \ is \ obsolete. \msg_see_documentation_text:n { tikzsymbols } } % \end{macrocode} % \end{macro} % % \begin{macro}{undefined-command} % Message for undefined commands used by \Makro{tikzsymbolsuse}. % \begin{macrocode} \msg_new:nnnn { tikzsymbols } { undefined-command } { Undefined \ Control \ sequence: \ '#1'. \ Did \ you \ write \ the \ name \ correctly? }{ The \ command \ is \ not \ defined. \msg_see_documentation_text:n { tikzsymbols } } % \end{macrocode} % \end{macro} % % \begin{macro}{ obsolete-command } % Message for obsolete commands (\Makro{Person}, etc.) % \begin{macrocode} \msg_new:nnnn { tikzsymbols } { obsolete-command } { Command \ '#1' \ is \ obsolete. \ Please \ use \ '#2' \ instead. } { The \ command \ you \ used \ is \ obsolete. \msg_see_documentation_text:n { tikzsymbols } } % \end{macrocode} % \end{macro} % % \begin{macro}{ tree } % Error message for \Makro{BasicTree}. I hope the text is understandable. % \begin{macrocode} \msg_new:nnnn { tikzsymbols } { tree } { Parameter \ '#1' \ cannot \ be \ used. \ The \ last \ parameter \ has \ either \ to \ be \ 'leaf' \ or \ has \ to \ be \ empty. } { The \ fourth \ mandatory \ argument \ of \ '\protect\BasicTree' \ has \ either \ to \ be \ leaf \ or \ empty. \msg_see_documentation_text:n { tikzsymbols } } % \end{macrocode} % \end{macro} % % \begin{macro}{ marvosym } % Message if option \Option{marvosym} is used, but the package not % loaded at all. % \begin{macrocode} \msg_new:nnnn { tikzsymbols } { marvosym } { Use \ option \ 'marvosym' \ only\ if \ you \ load \ package \ 'marvosym'. \ }{ Either \ load \ package \ 'marvosym' \ or \ delete \ the \ tikzsymbols \ option \ 'marvosym'. \ \msg_see_documentation_text:n { tikzsymbols } } % \end{macrocode} % \end{macro} % % % \begin{macro}{ Changey-number-too-large } % \changes{v3.95}{2016/03/20}{New} % \begin{macrocode} \msg_new:nnnn { tikzsymbols } { Changey-number-too-large } { Changey's \ mood \ has \ to \ be \ between \ -2 \ and \ 2 \ (currently:\ '#1' ). }{ Given \ number \ is \ too \ large \ (small), \ please \ use \ an \ number \ between \ -2 \ and \ 2. \msg_see_documentation_text:n { tikzsymbols } } \msg_new:nnnn { tikzsymbols } { cChangey-number-too-large } { cChangey's \ mood \ has \ to \ be \ between \ -2 \ and \ 2 \ (currently:\ '#1' ). }{ Given \ number \ is \ too \ large \ (small), \ please \ use \ an \ number \ between \ -2 \ and \ 2. \msg_see_documentation_text:n { tikzsymbols } } % \end{macrocode} % \end{macro} % % \begin{macro}{ tikzsymbolsaftersymbolinput } % \changes{v3.95}{2016/03/20}{New} % \begin{macrocode} \msg_new:nnnn { tikzsymbols } { tikzsymbolsaftersymbolinput } { The \ command \ \exp_not:N\tikzsymbolsaftersymbolinput is \ obsolete. \ Please \ use \ the \ option \ 'after-symbol' \ instead. }{ \exp_not:N\tikzsymbolsaftersymbolinput is \ not \ supported \ anymore. \msg_see_documentation_text:n { tikzsymbols } } % \end{macrocode} % \end{macro} % % \begin{macro}{ SchrodingersCat } % \begin{macrocode} \msg_new:nnnn { tikzsymbols } { SchrodingersCat } { \SchrodingersCat\ only \ accepts \ '-1' \ (dead), \ '0'\ (unknown)\ or \ '1'\ (alive) \ for \ its \ mandatroy \ argument. \ You \ have \ given \ '#1'. }{ Your \ input \ number \ is \ not \ allowed. \msg_see_documentation_text:n { tikzsymbols } } % \end{macrocode} % \end{macro} % % \begin{macro}{ internal-message } % \changes{v4.05}{2017/08/09}{New} % \begin{macrocode} \msg_new:nnnn { tikzsymbols } { internal-message } { This \ is \ an \ internal \ message \ and \ means \ that \ I \ (the \ package \ author) \ fucked \ up. \ If \ you \ stumble \ across \ this, \ the \ description \ message \ is \ '#1'. }{ I \ apologize \ for \ that. \msg_see_documentation_text:n { tikzsymbols } } % \end{macrocode} % \end{macro} % % \begin{macro}{ package-option } % \changes{v4.05}{2017/08/09}{New} % \begin{macrocode} \msg_new:nnnn { tikzsymbols } { package-option } { The \ option \ '#1' \ is \ only \ allowed \ as \ a \ package \ option. }{ This \ option \ is \ not \ allowed \ to \ be \ set \ using \ \tikzsymbolsset{}. \msg_see_documentation_text:n { tikzsymbols } } % \end{macrocode} % \end{macro} % % \begin{macro}{ package-option } % \changes{v4.05}{2017/08/09}{New} % \begin{macrocode} \msg_new:nnnn { tikzsymbols } { symbol-name-unknown } { The \ symbol \ '#1' \ is \ not \ available \ by \ this \ package. }{ Perhaps \ you \ have \ misspelled it. \msg_see_documentation_text:n { tikzsymbols } } % \end{macrocode} % \end{macro} % % % % % % % % % % % \subsection{Helping Commands} % \label{sec:helping-commands} % % I define some macros which will help me to write less. % % % % \begin{macro}{ \@@_Basic_Tree_aux:nnnnn } % I am still using a similar construction as in the \LaTeXe\ % code. Inside this command is safed either % \Makro{@@_Basic_Tree_on:nnnnn} or \Makro{@@_Basic_Tree_off:nnnnn} % depending on the package options. % \begin{macrocode} %\cs_new:Npn \@@_Basic_Tree_aux:nnnnn { } \cs_set:Npn \@@_Basic_Tree_aux:nnnnn { \bool_if:NTF \g_@@_if_opt_tree_print_bool { \@@_Basic_Tree_on:nnnnn } { \@@_Basic_Tree_off:nnnnn } } % \end{macrocode} % \end{macro} % %^^A The command \Makro{BasicTree} is split up into two commands, named %^^A \texttt{on} and \texttt{off}. The helper command %^^A \Makro{@@_Basic_Tree_aux:nnnnn} is redefined accordingly. %^^A \begin{macrocode} %^^A \end{macrocode} % % % \begin{macro}{ \@@_symbol_scale_i:n , \@@_symbol_scale_ii:nn } % \begin{macrocode} \cs_new:Npn \@@_symbol_scale_i:n #1 { \@@_symbol_scale_ii:nn {#1} { 1.0 } } \cs_new:Npn \@@_symbol_scale_ii:nn #1#2 { \prop_get:NnNTF \g_@@_english_commands_prop {#1} \l_tmpa_tl { \fp_set:cn { l_@@_ \l_tmpa_tl _scale_fp } {#2} }{ \fp_if_exist:cTF { l_@@_#1_scale_fp } { \fp_set:cn { l_@@_#1_scale_fp } {#2} } { \msg_error:nnn { tikzsymbols} { symbol-name-unknown } {#1} } } } % \end{macrocode} % \end{macro} % % % \begin{macro}{ \@@_set_scale_abs_tl:n } % Sets \Makro{l_@@_scale_abs_tl} to the absolute input value. I made % this to write less which is always a good idea (mostly). % \begin{macrocode} \cs_new:Npn \@@_set_scale_abs_tl:n #1 { \tl_set:Nx \l_@@_scale_abs_tl { \fp_eval:n { abs (#1) } } } % \end{macrocode} % \end{macro} % % % \begin{macro}{ \@@_create_draftbox:nn } % Creating the command to print the plain vanilla draft-boxes. The % group is needed because I am setting \Makro{vbadness} to % \Makro{c_max_dimen} to suppress underfull-hbox messages. The input % is evaluated because we need it for the height and the length of % the draftbox. The draftbox itself contains just the vbox and hbox % commands to set the height and length of the box surrounded by a % frame. % \begin{macrocode} \cs_new:Npn \@@_create_draftbox:nn #1#2 { \group_begin: \vbadness=\c_max_dim \fp_set:Nn \l_tmpa_fp {#1} \fp_set:Nn \l_tmpb_fp {#2} \frame { \vbox_to_ht:nn { \fp_to_dim:N \l_tmpb_fp } { \hbox_to_wd:nn { \fp_to_dim:N \l_tmpa_fp } { } } } \group_end: } % \end{macrocode} % \end{macro} % % \begin{macro}{ \@@_create_squared_draftbox:n } % Again a command to write less. This command is used if the drat-box % is a square. % \begin{macrocode} \cs_new:Npn \@@_create_squared_draftbox:n #1 { \@@_create_draftbox:nn {#1} {#1} } % \end{macrocode} % \end{macro} % % % \begin{macro}{ \@@_if_savebox_undefined_aux:nT } % I may misuse the naming scheme because the command ends with % \texttt{nT}, but is not a conditional % function. \Makro{l_@@_current_situation_tl} is used here. The box % is only defined if it not defined yet. I don't know how those % boxes work, but if the same box (alias the same command in the % same font size and the same color and same options) is used again % the output (maybe) doesn't need to be calculated again. Its % faster, somehow, but it's faster. I am using the old commands % \Makro{global} and \Makro{sbox} because I didn't find the \LaTeX3 % equivalents. % \begin{macrocode} \cs_new:Npn \@@_if_savebox_undefined:nT #1#2 { \tl_set:Nx \l_@@_current_situation_tl { \bool_if:NTF \g_@@_if_opt_draft_bool { T } { F } _ \current@color _ \f@size } \box_if_exist:cF { g_@@_savebox_ \l_@@_current_situation_tl _ #1 _box } { \box_new:c { g_@@_savebox_ \l_@@_current_situation_tl _ #1 _box } \exp_args:NNc \global \sbox { g_@@_savebox_ \l_@@_current_situation_tl _ #1 _box } {#2} } } % \end{macrocode} % \end{macro} % % % % % \begin{macro}{ \@@_use_savebox_aux:n } % Use the defined \Makro{sbox}-box. % \begin{macrocode} \cs_new:Npn \@@_use_savebox:n #1 { \exp_args:Nc \usebox { g_@@_savebox_ \l_@@_current_situation_tl _ #1 _box } } % \end{macrocode} % \end{macro} % % % % % \begin{macro}{\@@_provide_savebox_and_use:nT} % Again to support my laziness. It creates the box (if it isn't % defined yet) and uses the box immediately afterwards. % \begin{macrocode} \cs_new:Npn \@@_provide_savebox_and_use_aux:nT #1#2 { \@@_if_savebox_undefined:nT {#1} {#2} \@@_use_savebox:n {#1} } \cs_set_eq:NN \@@_provide_savebox_and_use:nT \@@_provide_savebox_and_use_aux:nT % \end{macrocode} % \end{macro} % % % To make this package \pkg{todonotes} safe: % \begin{macrocode} \pgfkeys{ /@@/.style= { baseline=default } } % \end{macrocode} % % % \subsection{Keys} % \label{sec:keys} % % Now let's define the keys for this package. Using \LaTeX3 makes the % whole thing a bit easier. All keys (or most) are in a group. I may % delete it because it may be not necessary. % \begin{macrocode} \keys_define:nn { tikzsymbols } { % \end{macrocode} % % \begin{macro}{ final } % Its the final option, deddepi, deedidbtutp. Nothing special. % \begin{macrocode} final .bool_gset_inverse:N = \g_@@_if_opt_draft_bool , final .default:n = { true } , % \end{macrocode} % \end{macro} % % % \begin{macro}{ draft } % This option can be set to three values: true, false and absolute. I % decided that \Option{draft=absolute} is obsolete and that % \Option{draft=true} replaces this option. Of course, the 'absolute' is % still available, but gives a warning when used. % \begin{macrocode} draft .choices:nn = { true , false , absolute } { \int_case:nn { \l_keys_choice_int } { { 1 } { \bool_gset_true:N \g_@@_if_opt_draft_bool } { 2 } { \bool_gset_false:N \g_@@_if_opt_draft_bool } { 3 } { \msg_error:nnnn { tikzsymbols } { obsolete-option } { draft = absolute } { draft = true } \bool_gset_true:N \g_@@_if_opt_draft_bool } } } , draft .default:n= { false } , % \end{macrocode} % \end{macro} % % \begin{macro}{ draftabsolute } % Obsolete option. Old name for \Option{draft=absolute} which is % itself an old name for \Option{draft=true}. Don't use this option. % \begin{macrocode} draftabsolute .code:n = { \msg_error:nnnn { tikzsymbols } { obsolete-option } { draftabsolute } { draft = true } \bool_gset_true:N \g_@@_if_opt_draft_bool } , % \end{macrocode} % \end{macro} % % \begin{macro}{ marvosym } % Sets the marvosym-boolean to it respective value. % \begin{macrocode} marvosym .bool_gset:N = \g_@@_if_opt_marvosym_bool , marvosym .default:n = { true } , marvosym .groups:n = { package } , % \end{macrocode} % \end{macro} % % \begin{macro}{ usebox } % Don't want to speed up the code due to random reasons? Set this % option to 'false'. % \begin{macrocode} usebox .choice: , usebox/true .code:n = {  \cs_set_eq:NN \@@_provide_savebox_and_use:nT \@@_provide_savebox_and_use_aux:nT } , usebox/false .code:n = {  \cs_set_eq:NN \@@_provide_savebox_and_use:nT \use_ii:nn } , usebox .default:n = { true } , % \end{macrocode} % \end{macro} % % \begin{macro}{ prefix } % Sets the prefix of the commands. If for example \Option{prefix} is % set to \Option{tikz} this prefix is added to the command % names. \Makro{Sieb} will be \Makro{tikzSieb}. % \begin{macrocode} prefix .tl_gset:N = \g_@@_command_prefix_tl , prefix .default:n = { tikzsymbols } , prefix .groups:n = { package } , % \end{macrocode} % \end{macro} % % \begin{macro}{ tree } % An old option, you should use \Option{draft=true} instead, but it % is not obsolete. For historic reasons this key still accepts 'on' % and 'off'. % \begin{macrocode} tree .choices:nn = { true , on , false , off } { \int_compare:nNnTF { \l_keys_choice_int } < { 3 } { \bool_gset_true:N \g_@@_if_opt_tree_print_bool } { \bool_gset_false:N \g_@@_if_opt_tree_print_bool } } , tree .default:n = { true } , % \end{macrocode} % \end{macro} % % % \begin{macro}{ after-symbol } % Available as package option, but should be used % using \Makro{tikzsymbolsuse}. % \begin{macrocode} after-symbol .tl_set:N = \l_@@_tikzsymbols_after_symbol_tl , after-symbol .default:n= { \xspace } , % \end{macrocode} % \end{macro} % % \begin{macro}{ baseline } % \begin{macrocode} baseline .choice: , baseline / true .code:n = { \pgfkeys{ /@@/.style={ baseline=default } } } , baseline / false .code:n = { \pgfkeys{ /@@/.style={ } } } , baseline .default:n = { true } , % \end{macrocode} % \end{macro} % % \begin{macro}{ global-scale } % \begin{macrocode} global-scale .fp_set:N = \l_@@_global_scale_fp , global-scale .default:n = { 1 } , % \end{macrocode} % \end{macro} % % This command has to be set later as % the command names have not been defined yet. % \begin{macro}{ symbol-scale } % \begin{macrocode} symbol-scale .code:n = { \tl_set:Nn \l_@@_used_only_once_because_no_better_idea_tl { symbol-scale = {#1} , } } , symbol-scale .default:n = { } , % \end{macrocode} % \end{macro} % % % Now we end the key definitions. % \begin{macrocode} } % \end{macrocode} % % % % We process all options. % \begin{macro}{ ProcessKeyOptions } % \begin{macrocode} \ProcessKeysOptions { tikzsymbols } % \end{macrocode} % \end{macro} % % \begin{macro}{ symbol-scale } % \begin{macrocode} \keys_define:nn { tikzsymbols } { symbol-scale .code:n = { \keyval_parse:NNn \@@_symbol_scale_i:n \@@_symbol_scale_ii:nn {#1} } } % \end{macrocode} % \end{macro} % % % % % \subsubsection{DeclareDocumentCommand Helpers} % \label{sec:declaredocumenthelpers} % % I define my own \Makro{DeclareDocumentCommand} (well, I am still % using \Makro{DeclareDocumentCommand}, but I am wrapping some other % commands around) to be able to add a prefix to the command-name and to % be able to write \Makro{Command}[] (note the empty brackets, you % don't need to insert a '1' inside, it is done automatically). % % \begin{macro}{ \@@_if_empty:Tn , \@@_scale_if_empty:nTn } % This command is used in \Makro{DeclareDocumentCommand} to help % setting the options with \verb|>{ \@@_if_empty:Tn } O{1}|. If the % brackets are empty the value of the option is inserted. Example: % The option has been defined by 'O{none}', so the value inserted if % no brackets are given is 'none'. If empty brackets are given, % normally nothing is inserted (and not 'none'). Using this command % if empty brackets are given 'none' is inserted automatically. This % safes some error messages. \Makro{ProcessedArgument} is defined in % the manual of \Package{xparse}. % \begin{macrocode} \cs_new:Npn \@@_if_empty:Tn #1#2 { \tl_if_empty:nTF {#2} { \tl_set:Nn \ProcessedArgument {#1} } { \tl_set:Nn \ProcessedArgument {#2} } } \cs_new:Npn \@@_scale_if_empty:nTn #1#2#3 { \tl_set:Nx \ProcessedArgument { \fp_eval:n { \tl_if_empty:nTF {#3} {#2} {#3} * \l_@@_global_scale_fp * \use:c { l_@@_#1_scale_fp } } } } % \end{macrocode} % \end{macro} % % \begin{macro}{ \@@_parse_command_options:n } % This command helps setting the default value if empty brackets are % given. The code is copied from the \Package{xparse} package and % edited to fit my purpose. This command gets the input from the % options-definition. % \begin{macrocode} \cs_new_protected:Npn \@@_parse_command_options:nn #1#2 { \clist_clear:N \l_tmpa_clist \tl_set:Nn \l_tmpa_tl {#1} \@@_parse_command_options:N #2 \q_recursion_tail \q_recursion_tail \q_recursion_tail \q_recursion_stop } % \end{macrocode} % \end{macro} % % \begin{macro}{ \@@_parse_command_options:N } % This command (also copied) goes through the option-definitions (in % my case only 'm' and 'O\{...\}') character for character. If 'O' % is found a (somehow) special command is used. % \begin{macrocode} \cs_new_protected:Npn \@@_parse_command_options:N #1 { \quark_if_recursion_tail_stop:N #1 \tl_if_eq:NNTF #1 O { \@@_parse_option_type_O:w #1 } { \tl_if_eq:NNTF #1 S { \@@_parse_option_type_S:Vw \l_tmpa_tl #1 } { \@@_parse_option_type:w #1 } } } % \end{macrocode} % \end{macro} % % \begin{macro}{ \@@_parse_option_type:w } % Just saves the input in a clist. Does nothing more. % \begin{macrocode} \cs_new_protected:Npn \@@_parse_option_type:w #1 { \str_case:nnF {#1} { { m } { } } { \msg_error:nnn { tikzsymbols } { internal-message } { internal-parsing } } \clist_put_right:Nn \l_tmpa_clist {#1} \@@_parse_command_options:N } % \end{macrocode} % \end{macro} % % \begin{macro}{ \@@_parse_option_type_O:w } % Used if an optional argument is found. Saves the default value of % the optional argument in \Makro{@@_if_empty:nn}. % \begin{macrocode} \cs_new_protected:Npn \@@_parse_option_type_O:w #1#2 { \clist_put_right:Nn \l_tmpa_clist { >{ \@@_if_empty:Tn {#2} } O{#2} } \@@_parse_command_options:N } % \end{macrocode} % \end{macro} % % \begin{macro}{ \@@_parse_option_type_S:w } % The |S| stands for \enquote{Scale}. % \begin{macrocode} \cs_new_protected:Npn \@@_parse_option_type_S:nw #1#2 { \clist_put_right:Nn \l_tmpa_clist { >{ \@@_scale_if_empty:nTn {#1} { 1 } } O{ 1 } } \@@_parse_command_options:N } \cs_generate_variant:Nn \@@_parse_option_type_S:nw { Vw } % \end{macrocode} % \end{macro} % % % \begin{macro}{ \@@_Declare_Document_Command:nnn } % Main Command to define the command of this package. It runs % through the second input (argument specifications), stores the % arguments in a \verb|\l_tmpa_clist| and adds % \verb|>{ \@@_if_empty:Tn {#2} }| if an optional argument is % found. Yeah. I think the rest is self-explaining. % \begin{macrocode} \cs_new:Npn \@@_Declare_Document_Command:nnn #1#2#3 { \fp_new:c { l_@@_#1_scale_fp } \fp_set:cn { l_@@_#1_scale_fp } { 1.0 } \@@_parse_command_options:nn {#1} {#2} \exp_args:Ncx \DeclareDocumentCommand { \g_@@_command_prefix_tl #1 } { \clist_use:Nn \l_tmpa_clist {} } { \cs_if_exist:NT \tikzsymbolsaftersymbolinput { \msg_error:nn { tikzsymbols } { tikzsymbolsaftersymbolinput } } #3 \tl_use:N \l_@@_tikzsymbols_after_symbol_tl } } % \end{macrocode} % \end{macro} % % % \begin{macro}{ \@@_Declare_Document_Commands:nnnn } % Needed for cooking-symbols. Automatically defines the english name % given in the second argument. % \begin{macrocode} \cs_new:Npn \@@_Declare_Document_Commands:nnnn #1#2#3#4 { \clist_put_right:Nn \g_tikzsymbols_list_of_printing_cooking_with_argument_commands_clist { \cs{#1} & \cs{#2} & \oarg{scale} & \tikzsymbolsuse{#1} \\ } \prop_gput:Nnn \g_@@_english_commands_prop {#2} {#1} \@@_Declare_Document_Command:nnn {#1} {#3} {#4} \@@_let:nn {#2} {#1} } % \end{macrocode} % \end{macro} % % % % % % % % % % \begin{macro}{ \@@_let:nn } % Used to define the english commands. It's a simple % \Makro{cs_set_eq:cc} adding the prefix to the command-name. % \begin{macrocode} \cs_new:Npn \@@_let:nn #1#2 { \cs_set_eq:cc { \g_@@_command_prefix_tl #1 } { \g_@@_command_prefix_tl #2 } } % \end{macrocode} % \end{macro} % % % % % %\subsection{Tree commands} %\label{sec:tree-commands} % % % % \begin{macro}{ \c_@@_tikz_set_tl } % First I define \verb|\c_@@_tikz_set_tl|, it contains the setup for % the tree. This definition is pretty much the definition from the % \Package{tikz} package. % \begin{macrocode} \tl_const:Nn \c_@@_tikz_set_tl { \tikzset { @@_ld/.style={ level ~ distance=#1ex }, @@_lw/.style={ line ~ width=#1ex }, level ~ 1/.style={ @@_ld=0.60, @@_trunk, @@_lw=0.1 ,sibling ~ angle=60 }, level ~ 2/.style={ @@_ld=0.20, @@_trunk!80!@@_leaf ~ a, @@_lw=.073,sibling ~ angle=70 }, level ~ 3/.style={ @@_ld=0.25, @@_trunk!60!@@_leaf ~ a, @@_lw=.05,sibling ~ angle=70 }, level ~ 4/.style={ @@_ld=0.10, @@_trunk!40!@@_leaf ~ a, @@_lw=.025,sibling ~ angle=60 }, level ~ 5/.style={ @@_ld=0.15, @@_trunk!20!@@_leaf ~ a, @@_lw=.02,sibling ~ angle=60 }, level ~ 6/.style={ @@_ld=0.08, @@_leaf ~ a, @@_lw=.021,sibling ~ angle=60 }, } } % \end{macrocode} % \end{macro} % % % % % \begin{macro}{ \@@_Basic_Tree_off:nnnnn } % This command creates not only the plain vanilla draftbox, but also a box % drawn by \Package{tikz} using the colors of the tree to color the % lines. If the last argument is 'leaf', the box has a bottom line, if % it is empty the bottom line disappears. % \begin{macrocode} \cs_new:Npn \@@_Basic_Tree_off:nnnnn #1#2#3#4#5 { \group_begin: \@@_set_scale_abs_tl:n {#1} \dim_set:Nn \l_tmpa_dim { \fp_to_dim:n { abs( #1 + 0.02 ex ) } } \tl_set:Nn \l_tmpa_tl {#5} \bool_if:NTF \g_@@_if_opt_draft_bool { \tl_if_eq:NNTF \c_@@_leaf_tl \l_tmpa_tl { \@@_create_draftbox:nn { (1.6772ex+0.4pt) * \l_tmpa_dim } { (1.42ex-0.2pt+0.4pt) * \l_tmpa_dim } }{ \@@_create_draftbox:nn { (1.3996ex+0.4pt) * \l_tmpa_dim } { (1.28ex-0.2pt+0.4pt) * \l_tmpa_dim } } }{ \begin{tikzpicture}[ /@@ , scale=#1+0.02ex,x=1ex,y=1ex, line ~ width=0.4pt * \l_tmpa_dim] \tl_if_eq:NNTF \c_@@_leaf_tl \l_tmpa_tl { \draw[#2] (-0.8386,0+0.2pt) -- (-0.8386,1.42); \draw[#3] (-0.8386,1.42) -- (0.8386,1.42); \draw[#4] (0.8386,1.42) -- (0.8386,0+0.2pt); \draw[#3] (0.8386,0+0.2pt) -- (0,0+0.2pt); \draw[#4] (0,0+0.2pt) -- (-0.8386,0+0.2pt); }{ \draw[#2] (-0.6998,0+0.2pt) -- (-0.6998,0.68+0.6); \draw[#3] (-0.6998,0.68+0.6) -- (0.6998,0.68+0.6); \draw[#4] (0.6998,0.68+0.6) -- (0.6998,0+0.2pt); } \end{tikzpicture}% } \group_end: } % \end{macrocode} % \end{macro} % % % % \begin{macro}{ \@@_Basic_Tree_on:nnnnn } % Prints the tree in all its glory. Again, this code is more or less % \Makro{l_@@_scale_negative_bool} is used in here. % copy and pasted from the \Package{tikz} manual. % \begin{macrocode} \cs_new:Npn \@@_Basic_Tree_on:nnnnn #1#2#3#4#5 { \group_begin: \bool_if:NTF \g_@@_if_opt_draft_bool { \@@_Basic_Tree_off:nnnnn {#1} {#2} {#3} {#4} {#5} } { \@@_set_scale_abs_tl:n {#1} \fp_compare:nT { #1 < 0 } { \bool_set_true:N \l_@@_scale_negative_bool } \tl_set:Nn \l_tmpa_tl {#5} \tl_use:N \c_@@_tikz_set_tl \colorlet { @@_trunk } {#2} \colorlet { @@_leaf ~ a } {#3} \colorlet { @@_leaf ~ b } {#4} \begin{tikzpicture}[ /@@ , x=1ex , y=1ex , line ~ width=0.07ex] \pgfarrowsdeclare{leaf}{leaf} { \pgfarrowsleftextend { -0.1ex } \pgfarrowsrightextend { -0.05ex } } { \pgfpathmoveto { \pgfpoint { -0.01ex } { 0ex } } \pgfpatharc { 150 } { 30 } { 0.08ex } \pgfpatharc {-30} {-150} { 0.08ex } \pgfusepathqfill } \tl_if_eq:NNTF \c_@@_leaf_tl \l_tmpa_tl { \draw[transparent , scale=#1+0.02ex , line ~ width=0.4pt* \l_@@_scale_abs_tl ] (-0.8386,0+0.2pt) rectangle (0.8386, 1.42); }{ \draw[transparent , scale=#1+0.02ex , line ~ width=0.4pt* \l_@@_scale_abs_tl ] (-0.6998,0+0.2pt) rectangle (0.6998,0.68+0.6); } \pgflowlevel { \pgftransformscale { #1 + 0.02ex } } { \coordinate (root) [grow ~ cyclic , rotate=90] child { child [line ~ cap=round] foreach \a in { 0 , 1 , 2 } { child ~ foreach \b in { 0 , 1 } { child ~ foreach \c in { 0 , 1 , 2 } { child ~ foreach \d in { 0 , 1 } { child ~ foreach ~ \leafcolor in { @@_leaf ~ a , @@_leaf ~ b } { edge ~ from ~ parent ~ [color=\leafcolor,-#5]} } } } } edge ~ from ~ parent [shorten ~ >=-0.05ex, serif ~ cm- , line ~ cap=butt] }; } \end{tikzpicture} \bool_set_false:N \l_@@_scale_negative_bool } \group_end: } % \end{macrocode} % \end{macro} % % Thats the end of our tree drawing commands. \Makro{BasicTree} % itself is defined later. % % \subsection{cooking utensils} % % Now let's define the cooking utensils (or cooking tools, % whatever). % % \begin{macro}{ \Kochtopf , \pot } % I think this was my first cooking utensil I made. It's a pot % containing boiling water. To create the german and english command % at the same time I use \Makro{@@_Declare_Document_Commands:nnnn}. % The buildup of this commands, as you saw ob subsection above, is % alway the same. First is the definition of the savebox. Inside the % absolute scaling value is safed and then checked if the plain % vanilla draft-boxes or the tool itself should be printed. The % draftbox is created via \Makro{@@_create_draftbox:nn} and contains % the necessary dimensions so that the output of the surroundings of % the symbol doesn't change\footnote{English, B\"a\"ahh!}. The % symbol is created using the 'tikzpicture' environment. Yup. % \begin{macrocode} \@@_Declare_Document_Commands:nnnn { Kochtopf } { pot } { S } { \@@_provide_savebox_and_use:nT { Kochtopf_#1 } { \@@_set_scale_abs_tl:n {#1} \bool_if:NTF \g_@@_if_opt_draft_bool { \@@_create_draftbox:nn { 2.47ex * \l_@@_scale_abs_tl } { 1.577ex * \l_@@_scale_abs_tl } }{ \begin{tikzpicture}[ /@@ , x=2ex,y=2.2ex, line ~ width=0.07ex * \l_@@_scale_abs_tl , scale=#1 ] % \end{macrocode} % Let's draw the pot. % \begin{macrocode} \draw[rounded ~ corners=0.2ex * \l_@@_scale_abs_tl] (0,0.5) -- (0,0) -- (1,0) -- (1,0.5); \draw (0,0.4) arc [start ~ angle=90, end ~ angle=270, radius=0.1]; \draw (1,0.4) arc [start ~ angle=90, end ~ angle=-90, radius=0.1]; \draw (0,0.5) -- (1,0.5) .. controls (1,0.6) and (0,0.6) .. (0,0.5); \draw (0.6,0.585) arc [start ~ angle=0, end ~ angle=180, radius=0.1]; % \end{macrocode} % Let's draw the water. % \begin{macrocode} \draw[decorate, decoration= { snake , amplitude=0.12ex*\l_@@_scale_abs_tl , segment ~ length=0.93ex * \l_@@_scale_abs_tl } ] (0,0.35) -- (1,0.35); % \end{macrocode} % Now the bubbles are printed. % \begin{macrocode} \draw (0.45,0.1) circle [radius=0.04]; \draw (0.7,0.11) circle [radius=0.04]; \draw (0.13, 0.125) circle [radius=0.04]; \draw (0.3,0.2) circle [radius=0.04]; \draw (0.88,0.2) circle [radius=0.04]; \draw (0.1,0.25) circle [radius=0.04]; \draw (0.6,0.25) circle [radius=0.04]; \end{tikzpicture} } } } % \end{macrocode} % \end{macro} % % % % \begin{macro}{ \Bratpfanne , \fryingpan } % I think I wont add text to every command because I think a % description is not really necessary. % \begin{macrocode} \@@_Declare_Document_Commands:nnnn { Bratpfanne } { fryingpan } { S } { \@@_provide_savebox_and_use:nT { Bratpfanne_#1 } { \@@_set_scale_abs_tl:n {#1} \bool_if:NTF \g_@@_if_opt_draft_bool { \@@_create_draftbox:nn { 3.5535ex * \l_@@_scale_abs_tl } { 1.4525ex * \l_@@_scale_abs_tl } }{ \begin{tikzpicture} [ /@@ , x=0.7ex , y=1.4ex , line ~ width=0.07ex * \l_@@_scale_abs_tl, scale=#1 , decoration= { snake , amplitude = 0.05ex * \l_@@_scale_abs_tl , segment ~ length = 0.408ex * \l_@@_scale_abs_tl } ] % \end{macrocode} % Drawing the actual fryingpan. % \begin{macrocode} \draw[rounded ~ corners = 0.07ex * \l_@@_scale_abs_tl] (-1,0) -- (1,0) -- (1.5,0.4) -- (-1.5,0.4) -- cycle; \draw[line ~ width = 0.037ex * \l_@@_scale_abs_tl , rounded ~ corners=0.023ex * \l_@@_scale_abs_tl] (-1.4,0.3) -- (-3.5,0.3) -- (-3.5,0.25) -- (-1.3,0.25); \draw[line ~ width=0.023ex * \l_@@_scale_abs_tl ] (-1.1,0.1) -- (1.1,0.1); % \end{macrocode} % The following code prints the \dots\ ahm \dots\ Hitzwellen die aus % der Pfanne aufsteigen (oder so). % \begin{macrocode} \foreach \l_tmpa_tl in { -0.3, 0.3, -1 , 1 } \draw[line ~ width=0.035ex * \l_@@_scale_abs_tl, decorate] ( \l_tmpa_tl , 0.5 ) -- ( \l_tmpa_tl , 1 ); \end{tikzpicture}% } } } % \end{macrocode} % \end{macro} % % % % % \begin{macro}{ \Schneebesen , \eggbeater } % \begin{macrocode} \@@_Declare_Document_Commands:nnnn { Schneebesen } { eggbeater } { S } { \@@_provide_savebox_and_use:nT { Schneebesen_#1 } { \@@_set_scale_abs_tl:n {#1} \bool_if:NTF \g_@@_if_opt_draft_bool { \@@_create_draftbox:nn { 0.5697ex * \l_@@_scale_abs_tl } { 1.57985ex * \l_@@_scale_abs_tl } }{ \begin{tikzpicture} [ /@@ , y=2.1ex,x=1.4ex, scale=#1, line ~ width = 0.01ex * \l_@@_scale_abs_tl * 0.97 ] \foreach \l_tmpa_fp in { -0.2 , -0.15, -0.1, -0.05, 0, 0.05, 0.1, 0.15, 0.2 } \draw (0,0) .. controls ( \l_tmpa_fp , 0.0) and ( \l_tmpa_fp ,0.2) .. (0,0.4); \fill [ line ~ width = 0.05ex * \l_@@_scale_abs_tl , rounded ~ corners=0.07ex* \l_@@_scale_abs_tl ] (-0.05,0.37) -- (0.05,0.37) -- (0.05,0.75) -- (-0.05,0.75) -- cycle; \end{tikzpicture}% } } } % \end{macrocode} % \end{macro} % % % % % \begin{macro}{ \Sieb , \sieve } % A sieve, now the lines are not drawn manually, but using the power % of trigonometric functions and \Package{tikz}. Wasn't really % necessary, but I did it anyway. % \begin{macrocode} \@@_Declare_Document_Commands:nnnn { Sieb } { sieve } { S } { \@@_provide_savebox_and_use:nT { Sieb_#1 } { \@@_set_scale_abs_tl:n {#1} \bool_if:NTF \g_@@_if_opt_draft_bool { \@@_create_draftbox:nn { 3.478ex * \l_@@_scale_abs_tl } { 1.175ex * \l_@@_scale_abs_tl } }{ \begin{tikzpicture} [ /@@ , x=2.8ex, y=2.8ex,line ~ width=0.02ex * \l_@@_scale_abs_tl , scale=#1 ] % \end{macrocode} % Drawing a simple line to hold the sieve. % \begin{macrocode} \draw[line ~ width=0.09ex* \l_@@_scale_abs_tl ] (-0.2,0) -- (1.01,0); % \end{macrocode} % Drawing halved circles with decreasing radius. % \begin{macrocode} \foreach \l_tmpa_fp in { 0.2 , 0.25 , ... , 0.551 } \draw (\l_tmpa_fp,0) arc [start ~ angle=180, end ~ angle=360, radius=0.6-\l_tmpa_fp]; % \end{macrocode} % Drawing the vertical lines of the sieve. Ahm, I may should explain % how this code works. \Makro{l_tmpa_fp} (again misused I think) % contains the starting point of the lines which will go from top to % bottom. % % Our sieve is looking like this at the moment: % %\begin{center} %\begin{tikzpicture}[scale=5] % \draw[very thick] % (-0.2,0) node [ anchor=east ]{-0.2} -- (1.01,0) node [ anchor=west ]{1.01}; % \draw[dashed] (0.6,-0.5) -- (0.6,0.1); % \draw (0.6,0) node [anchor=south west] {0.6}; % \foreach \x in { 0.2 , 0.25 , ... , 0.551 } % \draw (\x,0) arc [start angle=180, end angle=360, radius=0.6-\x]; %\end{tikzpicture} %\end{center} % % The largest circle end at the coordinate (1,0) and so its radius is $r=0.4$. % Now we want to draw a line from the beginning of a smaller circle % to the largest circle. We take for example the next smaller circle: % % \begin{center} %\begin{tikzpicture}[scale=5] % \draw[very thick] (-0.2,0) node [ anchor=east ]{-0.2} -- (1.01,0) node [ anchor=west ]{1.01}; % \draw[dashed] (0.6,-0.5) -- (0.6,0.1); % \draw (0.6,0) node [anchor=south west] {0.6}; % \draw[dashed] (0.2,0) arc [start angle=180, end angle=360, radius=0.4]; % \draw (0.3,0) node[above=1pt]{0.3} arc [start angle=180, end angle=360, radius=0.6-0.3] node [above]{0.9}; % \draw[brown,dashed,->] (0.6,0) -- node[right]{0.4} ( {0.6 - cos ( 45 ) *0.4 },{ sin ( -45 )*0.4 }); %\end{tikzpicture} % \end{center} % % The dashed line shows the largest circle. The only things we know are % the length $l$ from the middle of the circle (0.6 , 0) to the starting point (0.9 , 0): % $l=0.9-0.6$ and we know the radius of the circle: $r=0.4$. The next picture \dots % pictures this: % % \begin{center} %\begin{tikzpicture}[scale=5] % \draw[thick] (-0.2,0) -- (1.01,0) ; % \draw[dashed] (0.6,-0.5) -- (0.6,0.1); % \draw[dashed] (0.2,0) arc [start angle=180, end angle=360, radius=0.4]; % \draw (0.3,0) arc [start angle=180, end angle=360, radius=0.6-0.3] ; % \draw[green,very thick] (0.6,0) -- node [above,fill=white] {$l= 0.9-0.6=0.3$} (0.9,0); % \draw[red,very thick] (0.9,0) -- node [right,fill=white] {$h=?$} ( 0.9, { -0.4 * sin( acos( ( 0.9 - 0.6 ) /0.4) ) } ); % \draw[brown] (0.6,0) -- node [left=8pt,fill=white] {$r=0.4$} ( 0.9, { -0.4 * sin( acos( ( 0.9 - 0.6 ) /0.4) ) } ); % \draw[orange,very thick] (0.8,0) node [anchor=north east] {$\alpha$} arc [start angle=0, end angle={-acos( ( 0.9 - 0.6 ) /0.4)}, radius=0.2]; %\end{tikzpicture} % \end{center} % % We have the length and the radius and need the height $h$. The easiest way would % be the use of the sinus: $\sin(\alpha)=\frac{h}{r}$, but we don't have $\alpha$, % so we have to make an extra calculation: % %\begin{align} % \cos(\alpha) &= \frac{ l }{ r } = \frac{0.9-0.6}{0.4} && / \arccos(...) \\ % \alpha &= \arccos\bigg( \frac{0.9-0.6}{0.4} \bigg) %\end{align} % % Now we have the angle $\alpha$ and can calculate the height $h$: % %\begin{align} % -\sin(\alpha) &= \frac { h } { 0.4 } && / \cdot 0.4 \\ % h &= -0.4 \cdot \sin(\alpha) && / \alpha = ... \\ % h &= -0.4 \cdot \sin\bigg[\arccos\bigg( \frac{0.9-0.6}{0.4} \bigg)\bigg] %\end{align} % % And to use it as a overall formula: % %\begin{equation} % h = -0.4 \cdot \sin\bigg[\arccos\bigg( \frac{ \backslash l\_tmpa\_fp -0.6 }{0.4} \bigg)\bigg] %\end{equation} % % Using this formula we can draw the line (\textbackslash l\_tmpa\_fp,0) -{}- (\textbackslash l\_tmpa\_fp,h): % % Something similar is used for the horizontal lines. % % \begin{macrocode} \foreach \l_tmpa_fp in { 0.95,0.9,...,0.249 } \draw (\l_tmpa_fp,0) -- ( \l_tmpa_fp, { -0.4 * sin( acos( ( \l_tmpa_fp - 0.6 ) /0.4) ) } ); \foreach \y in { -0.05 , -0.1 , ... , -0.351 } \pgfmathsetmacro{\x}{0.4*cos( asin( \y /0.4 ) )} \draw ({0.6 - \x },\y) -- ({ 0.6 +\x},\y); \end{tikzpicture}% } } } % \end{macrocode} % I hope I was able to explain it. % \end{macro} % % % % % \begin{macro}{ \Purierstab , \blender } % Ein P\"urierstab \dots\ ja. % \begin{macrocode} \@@_Declare_Document_Commands:nnnn { Purierstab } { blender } { S } { \@@_provide_savebox_and_use:nT { Purierstab_#1 } { \@@_set_scale_abs_tl:n {#1} \bool_if:NTF \g_@@_if_opt_draft_bool { \@@_create_draftbox:nn { 0.76ex * \l_@@_scale_abs_tl } { 1.575ex * \l_@@_scale_abs_tl } }{ \begin{tikzpicture} [ /@@ , x=2.3ex , y=2.2ex, line ~ width=0.07ex * \l_@@_scale_abs_tl ,scale = #1 ] \draw[rounded ~ corners=0.07ex* \l_@@_scale_abs_tl ] (0,0) -- (0.3,0) -- (0.15,0.1) --cycle; \fill[rounded ~ corners=0.07ex* \l_@@_scale_abs_tl ] (0.15,0.3) -- (0.24,0.4) -- (0.24,0.7) -- (0.06,0.7) -- (0.06,0.4) -- cycle; \draw (0.15,0.4) -- (0.15,0.1); \end{tikzpicture}% } } } % \end{macrocode} % \end{macro} % % % % % \begin{macro}{ \Dreizack , \trident } % A trident, an important tool to check if potatoes are cooked enough. % \begin{macrocode} \@@_Declare_Document_Commands:nnnn { Dreizack } { trident } { S } { \@@_provide_savebox_and_use:nT { Dreizack_#1 } { \@@_set_scale_abs_tl:n {#1} \bool_if:NTF \g_@@_if_opt_draft_bool { \@@_create_draftbox:nn { 0.265ex * \l_@@_scale_abs_tl } { 1.575ex * \l_@@_scale_abs_tl } }{ \begin{tikzpicture} [ /@@ , x=2.3ex , y=2.2ex , line ~ width=0.035ex * \l_@@_scale_abs_tl , scale = #1 ] \fill[ rounded ~ corners=0.07ex * \l_@@_scale_abs_tl * 0.99 ] (0,0) -- (0,0.4) -- (0.1,0.4) -- (0.1,0.0) -- cycle; \draw (0.05,0) -- (0.05,0.7); \draw[rounded ~ corners=0.07ex * \l_@@_scale_abs_tl *( 1 - \l_@@_scale_abs_tl /50 ] (0,0.7) -- (0,0.55) -- (0.05,0.55) -- (0.1,0.55) -- (0.1,0.7); \end{tikzpicture}% } } } % \end{macrocode} % \end{macro} % % % % % \begin{macro}{ \Backblech , \bakingplate } % With holes. % \begin{macrocode} \@@_Declare_Document_Commands:nnnn { Backblech } { bakingplate } { S } { \@@_provide_savebox_and_use:nT { Backblech_#1 } { \@@_set_scale_abs_tl:n {#1} \bool_if:NTF \g_@@_if_opt_draft_bool { \@@_create_draftbox:nn { 2.3155ex * \l_@@_scale_abs_tl } { 1.57ex * \l_@@_scale_abs_tl } }{ \begin{tikzpicture} [ /@@ , x=6.53ex , y=5ex , line ~ width=0.07ex * \l_@@_scale_abs_tl , scale = #1 ] \filldraw[rounded ~ corners=0.09ex * \l_@@_scale_abs_tl ] (0,0) rectangle (0.3,0.3); \foreach \xI/\xII in { 0.1/-0.025 , 0.2/0.325 } \draw[rounded ~ corners=0.07ex * \l_@@_scale_abs_tl , line ~ width=0.03ex* \l_@@_scale_abs_tl ] (\xI,0) -- (\xII,0) -- (\xII,0.3) -- (\xI,0.3); \foreach \@@_BackblechlochX in { 0.007 , 0.293 } \foreach \@@_BackblechlochY in { 0.007 , 0.293 } \fill[white] (\@@_BackblechlochX, \@@_BackblechlochY) circle [radius=0.02ex]; \end{tikzpicture}% } } } % \end{macrocode} % \end{macro} % % % % % \begin{macro}{ \Ofen , \oven } % Ein Ofen. Sieht eigentlich so aus wie der zu Hause. % \begin{macrocode} \@@_Declare_Document_Commands:nnnn { Ofen } { oven } { S } { \@@_provide_savebox_and_use:nT { Ofen_#1 } { \@@_set_scale_abs_tl:n {#1} \bool_if:NTF \g_@@_if_opt_draft_bool { \@@_create_draftbox:nn { 2.07ex * \l_@@_scale_abs_tl } { 1.57ex * \l_@@_scale_abs_tl } }{ \begin{tikzpicture} [ /@@ , x=0.50ex , y=0.5ex , line ~ width=0.07ex * \l_@@_scale_abs_tl , scale=#1 ] \draw (0,0) rectangle (4,3); \draw (0.25,0.25) rectangle (3.75,2); \foreach \@@_Ofenschalter in {0.5,1.1,2.9,3.5} \fill (\@@_Ofenschalter,2.5) circle [radius=0.22]; \draw (1.5,2.28) rectangle (2.5,2.72); \draw[line ~ width=0.05ex * \l_@@_scale_abs_tl] (1,1.75) -- (3,1.75); \end{tikzpicture}% } } } % \end{macrocode} % \end{macro} % % % % % \begin{macro}{ \Pfanne , \pan } % A pan with a wave-decoration. Resembles the one at home. % \begin{macrocode} \@@_Declare_Document_Commands:nnnn { Pfanne } { pan } { S } { \@@_provide_savebox_and_use:nT { Pfanne_#1 } { \@@_set_scale_abs_tl:n {#1} \bool_if:NTF \g_@@_if_opt_draft_bool { \@@_create_draftbox:nn { 3.034ex * \l_@@_scale_abs_tl } { 0.78ex * \l_@@_scale_abs_tl } }{ \begin{tikzpicture} [ /@@ , x=2.3ex , y=2.3ex , line ~ width=0.09ex * \l_@@_scale_abs_tl , scale=#1 ] \draw [rounded ~ corners = 0.023ex * \l_@@_scale_abs_tl ] (0,0) -- (0.9,0) -- (1,0.3) -- (-0.1,0.3) -- cycle; \draw (-0.2,0.22) -- (-0.08,0.22); \draw (0.97,0.22) -- (1.08,0.22); \draw [ decorate , decoration= { snake,amplitude =.046ex* \l_@@_scale_abs_tl , segment ~ length = 0.82ex* \l_@@_scale_abs_tl }, line ~ width=0.05ex* \l_@@_scale_abs_tl ] (-0.05,0.1) -- (0.95,0.1); \end{tikzpicture}% } } } % \end{macrocode} % \end{macro} % % % % % \begin{macro}{ \Herd , \cooker } % Needed to cook things. Is pretty much looks exactly like the one % at home. % \begin{macrocode} \@@_Declare_Document_Commands:nnnn { Herd } { cooker } { S } { \@@_provide_savebox_and_use:nT { Herd_#1 } { \@@_set_scale_abs_tl:n {#1} \bool_if:NTF \g_@@_if_opt_draft_bool { \@@_create_draftbox:nn { 2.08ex * \l_@@_scale_abs_tl } { 1.58ex * \l_@@_scale_abs_tl } }{ \begin{tikzpicture} [ /@@ , x=1ex , y=1ex , line ~ width= 0.04ex * \l_@@_scale_abs_tl , scale = #1 ] \draw[line ~ width=0.08ex* \l_@@_scale_abs_tl ] (0,0) rectangle (2,1.5); \foreach \y/\radius in { 0.45/0.35 , 0.45/0.2 , 1.15/0.21 } \draw (0.5,\y) circle [radius=\radius]; \draw (1.45,1.15) circle [radius=0.15]; \draw (1.45,0.45) circle [radius=0.3]; \draw (1.05,0.95) rectangle (1.85,1.35); \end{tikzpicture}% } } } % \end{macrocode} % \end{macro} % % % % % \begin{macro}{ \Saftpresse , \squeezer } % We have one of these, I still think its useful. % \begin{macrocode} \@@_Declare_Document_Commands:nnnn { Saftpresse } { squeezer } { S } { \@@_provide_savebox_and_use:nT { Saftpresse_#1 } { \@@_set_scale_abs_tl:n {#1} \bool_if:NTF \g_@@_if_opt_draft_bool { \@@_create_draftbox:nn { 1.87ex * \l_@@_scale_abs_tl } { 1.62ex * \l_@@_scale_abs_tl } }{ \begin{tikzpicture} [ /@@ , x=1.2ex , y=1ex, line ~ width=0.07ex * \l_@@_scale_abs_tl ,scale=#1 ] \draw[rounded ~ corners=0.1ex * \l_@@_scale_abs_tl ] (0,0) rectangle (1.5,0.85) -- cycle; \draw (0,0.7) -- (1.5,0.7); \foreach \xi/\xii in { 0.3/1.2 , 0.45/1.05 , 0.65/0.85 } \draw[rounded ~ corners=0.1ex* \l_@@_scale_abs_tl ] (\xi,0.7) -- (0.75,1.55) -- (\xii,0.7); \draw [ line ~ width=0.05ex* \l_@@_scale_abs_tl , decorate, decoration= { snake,amplitude=0.05ex * \l_@@_scale_abs_tl , segment ~ length=0.48ex * \l_@@_scale_abs_tl } ] (0,0.3) -- (1.5,0.3); \end{tikzpicture}% } } } % \end{macrocode} % \end{macro} % % % % % \begin{macro}{ \Schussel , \bowl } % A bowl. The edge was an accident, but I thought that it looks good % and so I keeped it. % \begin{macrocode} \@@_Declare_Document_Commands:nnnn { Schussel } { bowl } { S } { \@@_provide_savebox_and_use:nT { Schussel_#1 } { \@@_set_scale_abs_tl:n {#1} \bool_if:NTF \g_@@_if_opt_draft_bool { \@@_create_draftbox:nn { 2.32ex * \l_@@_scale_abs_tl } { 1.47ex * \l_@@_scale_abs_tl } }{ \begin{tikzpicture} [ /@@ , x=1ex , y=1ex , line ~ width=0.07ex * \l_@@_scale_abs_tl , scale=#1 ] \draw[rounded ~ corners=0.5ex* \l_@@_scale_abs_tl ] (-0.02,1.4) -- (0,1.4) -- (0,0.05) -- (1.5,0.05) -- (1.5,1.4) -- (1.52,1.4); \draw (0.35,0) -- (1.15,0); \draw[transparent] (-0.4,0) -- (1.85,0); \end{tikzpicture}% } } } % \end{macrocode} % \end{macro} % % % % % \begin{macro}{ \Schaler , \peeler } % Again an image of on I use to peel for example potatoes. % \begin{macrocode} \@@_Declare_Document_Commands:nnnn { Schaler } { peeler } { S } { \@@_provide_savebox_and_use:nT { Schaler_#1 } { \@@_set_scale_abs_tl:n {#1} \bool_if:NTF \g_@@_if_opt_draft_bool { \@@_create_draftbox:nn { 1.15ex * \l_@@_scale_abs_tl } { 1.565ex * \l_@@_scale_abs_tl } }{ \begin{tikzpicture} [ /@@ , x=2.7ex , y=2.3ex , line ~ width=0.07ex * \l_@@_scale_abs_tl , scale=#1 ] \draw[rounded ~ corners=0.07ex* \l_@@_scale_abs_tl ] (0,0.4) -- (0,0.1) arc [start ~ angle=0, end ~ angle=180, radius=-0.1] -- (0.2,0.4) -- (0.3,0.5) -- (0.3,0.65) -- (0.2,0.65) -- (0.2,0.5) -- (0,0.5) -- (0,0.65) -- (-0.1,0.65) -- (-0.1,0.5) -- cycle; \draw[line ~ width=0.03ex* \l_@@_scale_abs_tl ] (0,0.58) rectangle (0.2,0.6); \end{tikzpicture}% } } } % \end{macrocode} % \end{macro} % % % % % \begin{macro}{ \Reibe , \grater } % I get out of ideas to write. % \begin{macrocode} \@@_Declare_Document_Commands:nnnn { Reibe } { grater } { S } { \@@_provide_savebox_and_use:nT { Reibe_#1 } { \@@_set_scale_abs_tl:n {#1} \bool_if:NTF \g_@@_if_opt_draft_bool { \@@_create_draftbox:nn { 1.08ex * \l_@@_scale_abs_tl } { 1.58ex * \l_@@_scale_abs_tl } }{ \begin{tikzpicture} [ /@@ , x=1ex , y=1ex , line ~ width=0.08ex * \l_@@_scale_abs_tl , scale=#1 ] \draw (0,0) rectangle (1,1.2); \draw[rounded ~ corners=0.04ex] (0.05,1.2) rectangle (0.95,1.5); \foreach\x in { 0.2, 0.4 , 0.6 , 0.8} \foreach\y in { 0.2 , 0.4, 0.6 , 0.8, 1} \fill (\x,\y) circle [radius=0.05ex]; \end{tikzpicture}% } } } % \end{macrocode} % \end{macro} % % % % % \begin{macro}{ \Flasche , \bottle } % It's a bottle. Uhhhh\dots % \begin{macrocode} \@@_Declare_Document_Commands:nnnn { Flasche } { bottle } { S } { \@@_provide_savebox_and_use:nT { Flasche_#1 } { \@@_set_scale_abs_tl:n {#1} \bool_if:NTF \g_@@_if_opt_draft_bool { \@@_create_draftbox:nn { 0.78ex * \l_@@_scale_abs_tl } { 1.58ex * \l_@@_scale_abs_tl } }{ \begin{tikzpicture} [ /@@ , x=1ex,y=1ex, line ~ width=0.08ex* \l_@@_scale_abs_tl , rounded ~ corners=0.08ex* \l_@@_scale_abs_tl , scale=#1 ] \draw (0, 1.5) -- (0,1.2) -- (-0.15,0.8) -- (-0.15,0) --++ (0.6,0) --++ (0,0.8) --++ (-0.15,0.4) --++ (0,0.3) -- cycle; % \draw (-0.15,0.8) -- (0.45,0.8); % \draw (-0.15,0.3) -- (0.45,0.3); \draw[transparent] (-0.2,0) --++ (0.7,0); \end{tikzpicture}% } } } % \end{macrocode} % \end{macro} % % % % % % \begin{macro}{ \Nudelholz , \rollingpin } % You know what that is\dots % % For the draftbox the calculation of the length is \verb|(1.26ex + 4.25ex)*0.8 + 0.1ex|. % \begin{macrocode} \@@_Declare_Document_Commands:nnnn { Nudelholz } { rollingpin } { S } { \@@_provide_savebox_and_use:nT { Nudelholz_#1 } { \@@_set_scale_abs_tl:n {#1} \bool_if:NTF \g_@@_if_opt_draft_bool { \@@_create_draftbox:nn { 4.508ex * \l_@@_scale_abs_tl }%% { 0.9ex * \l_@@_scale_abs_tl } }{ \begin{tikzpicture} [ /@@ , x=0.8ex, y=0.8ex, scale=#1, line ~ width=0.1ex * \l_@@_scale_abs_tl , ] \draw[rounded ~ corners=0.10ex*\l_@@_scale_abs_tl] (0,0) rectangle (3,1); \draw[rounded ~ corners=0.15ex*\l_@@_scale_abs_tl] (3,0.75) -- (3.25,0.6) -- (3.75,0.7) -- (4.25,0.6) (3,0.25) -- ( 3.25,0.4 ) -- (3.75,0.3) -- (4.25,0.4); \draw (4.25,0.5) ellipse [x ~ radius=0.01, y ~ radius=0.1]; \draw[rounded ~ corners=0.15ex*\l_@@_scale_abs_tl] (-0,0.75) -- (-0.25,0.6) -- (-0.75,0.7) -- (-1.25,0.6) (-0,0.25) -- ( -0.25,0.4 ) -- (-0.75,0.3) -- (-1.25,0.4); \draw (-1.25,0.5) ellipse [x ~ radius=0.01, y ~ radius=0.1]; \end{tikzpicture} } } } % \end{macrocode} % \end{macro} % % % % % % % % \subsection{Emoticonscode} % % Now the emoticons are coded. % % % % % \begin{macro}{ \Sadey } % I don't know why Sadey is the first and not Smiley, probably for reasons. % \begin{macrocode} \@@_Declare_Document_Command:nnn { Sadey } { S O{none} } { \@@_provide_savebox_and_use:nT { Sadey_#1_#2 } { \@@_set_scale_abs_tl:n {#1} \bool_if:NTF \g_@@_if_opt_draft_bool { \@@_create_squared_draftbox:n { 1.704ex * \l_@@_scale_abs_tl } }{ \begin{tikzpicture} [ /@@ , x=2.4ex , y=2.4ex, line ~ width=0.09ex * \l_@@_scale_abs_tl , scale = #1 ] \filldraw[fill=#2, line ~ width=0.1ex* \l_@@_scale_abs_tl ] (0,0) circle [radius=0.33]; \fill (0.1,0.1) circle [radius=0.05]; \fill (-0.1,0.1) circle [radius=0.05]; \draw (-0.2,-0.15) .. controls (-0.1,-0.06) and (0.1,-0.06) .. (0.2,-0.15); \end{tikzpicture} } } } % \end{macrocode} % \end{macro} % % % \begin{macro}{ \dSadey } % Coding the \enquote{3D} Sadey. Again, nothing special. % \begin{macrocode} \@@_Declare_Document_Command:nnn { dSadey } { S O{yellow} } { \@@_provide_savebox_and_use:nT { dSadey_#1_#2 } { \@@_set_scale_abs_tl:n {#1} \bool_if:NTF \g_@@_if_opt_draft_bool { \@@_create_squared_draftbox:n { 1.584ex * \l_@@_scale_abs_tl } }{ \begin{tikzpicture} [ /@@ , x=2.4ex, y=2.4ex, line ~ width=0.09ex * \l_@@_scale_abs_tl , scale = #1 ] \shade[ball ~ color=#2] (0,0) circle [radius=0.33]; \shade[ball ~ color=black] (0.1,0.1) circle [radius=0.05]; \shade[ball ~ color=black] (-0.1,0.1) circle [radius=0.05]; \draw[black] (-0.2,-0.15) .. controls (-0.1,-0.06) and (0.1,-0.06) .. (0.2,-0.15); \end{tikzpicture}% } } } % \end{macrocode} % \end{macro} % % % %\begin{macro}{ \Changey } % \changes{v0.95}{2016/03/20}{New.} % Thanks to Marcel for the request. % \begin{macrocode} \@@_Declare_Document_Command:nnn { Changey } { S O{white} m } { \@@_provide_savebox_and_use:nT { Changey_#1_#2_#3 } { \fp_compare:nT { abs(#3) > 2 } { \msg_error:nnn { tikzsymbols } { Changey-number-too-large } {#3} } \@@_set_scale_abs_tl:n {#1} \bool_if:NTF \g_@@_if_opt_draft_bool { \@@_create_squared_draftbox:n { 1.704ex * \l_@@_scale_abs_tl } }{ \begin{tikzpicture} [ /@@ , x=2.4ex, y=2.4ex, line ~ width=0.12ex* \l_@@_scale_abs_tl ,scale=#1 ] \filldraw[fill=#2] (0,0) circle [radius=0.33]; \fill (-0.1,0.1) circle [radius=0.05]; \fill (0.1,0.1) circle [radius=0.05]; \pgfmathsetmacro \l_tmpa_tl { -0.125 + 0.025*#3 } \pgfmathsetmacro \l_tmpb_tl { \l_tmpa_tl - 0.1*#3 } \draw ( -0.2 , \l_tmpa_tl ) .. controls ( -0.1 , \l_tmpb_tl ) and ( 0.1 , \l_tmpb_tl ) .. ( 0.2 , \l_tmpa_tl ) ; \end{tikzpicture} } } } % \end{macrocode} %\end{macro} % %\begin{macro}{ \dChangey } % \changes{v3.95}{2016/03/20}{New.} % Thanks to Marcel for the request. % \begin{macrocode} \@@_Declare_Document_Command:nnn { dChangey } { S O{yellow} m } { \@@_provide_savebox_and_use:nT { dChangey_#1_#2_#3 } { \fp_compare:nT { abs(#3) > 2 } { \msg_error:nnn { tikzsymbols } { Changey-number-too-large } {#3} } \@@_set_scale_abs_tl:n {#1} \bool_if:NTF \g_@@_if_opt_draft_bool { \@@_create_squared_draftbox:n { 1.584ex * \l_@@_scale_abs_tl } }{ \begin{tikzpicture} [ /@@ , x=2.4ex, y=2.4ex, line ~ width=0.12ex* \l_@@_scale_abs_tl ,scale=#1 ] \shade[ball ~ color=#2] (0,0) circle [radius=0.33]; \shade[ball ~ color=black] (-0.1,0.1) circle [radius=0.05]; \shade[ball ~ color=black] (0.1,0.1) circle [radius=0.05]; \pgfmathsetmacro \l_tmpa_tl { -0.125 + 0.025*#3 } \pgfmathsetmacro \l_tmpb_tl { \l_tmpa_tl - 0.1*#3 } \draw[black] ( -0.2 , \l_tmpa_tl ) .. controls ( -0.1 , \l_tmpb_tl ) and ( 0.1 , \l_tmpb_tl ) .. ( 0.2 , \l_tmpa_tl ) ; \end{tikzpicture} } } } % \end{macrocode} %\end{macro} % % % %\begin{macro}{ \cChangey } % \changes{v4.02}{2017/05/14}{New.} % Why didn't I implement this earlier? % \begin{macrocode} \cs_new:Npn \@@_cChangey:nnn #1 #2#3 { \fp_set:Nn \l_tmpa_fp { abs (#1/2) * 100 } \@@_cChangey_aux:xnn { \fp_use:N \l_tmpa_fp } {#2} {#3} } \cs_new:Npn \@@_cChangey_aux:nnn #1 #2#3 { \filldraw[fill=#2!#1!#3] } \cs_generate_variant:Nn \@@_cChangey_aux:nnn { x } \@@_Declare_Document_Command:nnn { cChangey } { S O{red} O{yellow} O{green} m } { \@@_provide_savebox_and_use:nT { cChangey_#1_#2_#3_#4_#5 } { \fp_compare:nT { abs(#5) > 2 } { \msg_error:nnn { tikzsymbols } { cChangey-number-too-large } {#5} } \@@_set_scale_abs_tl:n {#1} \bool_if:NTF \g_@@_if_opt_draft_bool { \@@_create_squared_draftbox:n { 1.704ex * \l_@@_scale_abs_tl } }{ \begin{tikzpicture} [ /@@ , x=2.4ex, y=2.4ex, line ~ width=0.12ex* \l_@@_scale_abs_tl ,scale=#1 ] \fp_compare:nNnT {#5} < { \c_zero } { \@@_cChangey:nnn {#5} {#2} {#3} (0,0) circle [radius=0.33]; } \fp_compare:nNnT {#5} > { \c_zero } { \@@_cChangey:nnn {#5} {#4} {#3} (0,0) circle [radius=0.33]; } \fp_compare:nNnT {#5} = { \c_zero } { \filldraw [fill=#3] (0,0) circle [radius=0.33]; } \fill (-0.1,0.1) circle [radius=0.05]; \fill (0.1,0.1) circle [radius=0.05]; \pgfmathsetmacro \l_tmpa_tl { -0.125 + 0.025*#5 } \pgfmathsetmacro \l_tmpb_tl { \l_tmpa_tl - 0.1*#5 } \draw ( -0.2 , \l_tmpa_tl ) .. controls ( -0.1 , \l_tmpb_tl ) and ( 0.1 , \l_tmpb_tl ) .. ( 0.2 , \l_tmpa_tl ) ; \end{tikzpicture} } } } % \end{macrocode} %\end{macro} % %\begin{macro}{ \dcChangey } % \changes{v4.02}{2017/05/14}{New.} % Same as above % \begin{macrocode} \cs_new:Npn \@@_dcChangey:nnn #1 #2#3 { \fp_set:Nn \l_tmpa_fp { abs (#1/2) * 100 } \@@_dcChangey_aux:xnn { \fp_use:N \l_tmpa_fp } {#2} {#3} } \cs_new:Npn \@@_dcChangey_aux:nnn #1 #2#3 { \shade [ball ~ color=#2!#1!#3] } \cs_generate_variant:Nn \@@_dcChangey_aux:nnn { x } \@@_Declare_Document_Command:nnn { dcChangey } { S O{red} O{yellow} O{green} m } { \@@_provide_savebox_and_use:nT { dcChangey_#1_#2_#3_#4_#5 } { \fp_compare:nT { abs(#5) > 2 } { \msg_error:nnn { tikzsymbols } { cChangey-number-too-large } {#5} } \@@_set_scale_abs_tl:n {#1} \bool_if:NTF \g_@@_if_opt_draft_bool { \@@_create_squared_draftbox:n { 1.584ex * \l_@@_scale_abs_tl } }{ \begin{tikzpicture} [ /@@ , x=2.4ex, y=2.4ex, line ~ width=0.12ex* \l_@@_scale_abs_tl ,scale=#1 ] \fp_compare:nNnT {#5} < { \c_zero } { \@@_dcChangey:nnn {#5} {#2} {#3} (0,0) circle [radius=0.33]; } \fp_compare:nNnT {#5} > { \c_zero } { \@@_dcChangey:nnn {#5} {#4} {#3} (0,0) circle [radius=0.33]; } \fp_compare:nNnT {#5} = { \c_zero } { \shade[ball ~ color=#3] (0,0) circle [radius=0.33]; } \shade[ball ~ color=black] (-0.1,0.1) circle [radius=0.05]; \shade[ball ~ color=black] (0.1,0.1) circle [radius=0.05]; \pgfmathsetmacro \l_tmpa_tl { -0.125 + 0.025*#5 } \pgfmathsetmacro \l_tmpb_tl { \l_tmpa_tl - 0.1*#5 } \draw[black] ( -0.2 , \l_tmpa_tl ) .. controls ( -0.1 , \l_tmpb_tl ) and ( 0.1 , \l_tmpb_tl ) .. ( 0.2 , \l_tmpa_tl ) ; \end{tikzpicture} } } } % \end{macrocode} %\end{macro} % % % % % %\begin{macro}{ \Annoey } % An annoyed Smiley. It's annoyed. % \begin{macrocode} \@@_Declare_Document_Command:nnn { Annoey } { S O{none} } { \@@_provide_savebox_and_use:nT { Annoey_#1_#2 } { \@@_set_scale_abs_tl:n {#1} \bool_if:NTF \g_@@_if_opt_draft_bool { \@@_create_squared_draftbox:n { 1.704ex * \l_@@_scale_abs_tl } }{ \begin{tikzpicture} [ /@@ , x=2.4ex, y=2.4ex, line ~ width=0.09ex * \l_@@_scale_abs_tl ,scale=#1 ] \filldraw[fill=#2, line ~ width=0.12ex* \l_@@_scale_abs_tl ] (0,0) circle [radius=0.33]; \draw (0.08,0.1) -- (0.22,0.1); \draw (-0.08,0.1) -- (-0.22,0.1); \draw (-0.2,-0.1) -- (0.2,-0.1); \end{tikzpicture}% } } } % \end{macrocode} %\end{macro} % % % %\begin{macro}{ \dAnnoey } % It's annoyed about 3D. % \begin{macrocode} \@@_Declare_Document_Command:nnn { dAnnoey } { S O{yellow} } { \@@_provide_savebox_and_use:nT { dAnnoey_#1_#2 } { \@@_set_scale_abs_tl:n {#1} \bool_if:NTF \g_@@_if_opt_draft_bool { \@@_create_squared_draftbox:n { 1.584ex * \l_@@_scale_abs_tl } }{ \begin{tikzpicture} [ /@@ , x=2.4ex, y=2.4ex, line ~ width=0.09ex* \l_@@_scale_abs_tl ,scale=#1 ] \shade[ball ~ color=#2] (0,0) circle [radius=0.33]; \draw[black] (0.08,0.1) -- (0.22,0.1); \draw[black] (-0.08,0.1) -- (-0.22,0.1); \draw[black] (-0.2,-0.1) -- (0.2,-0.1); \end{tikzpicture}% } } } % \end{macrocode} %\end{macro} % % % % % % % \begin{macro}{ \Smiley } % This command is not defined if the option \Option{marvosym} % is set to true. % \begin{macrocode} \bool_if:NF \g_@@_if_opt_marvosym_bool { \@@_Declare_Document_Command:nnn { Smiley } { S O{none} } { \@@_provide_savebox_and_use:nT { Smiley_#1_#2 } { \@@_set_scale_abs_tl:n {#1} \bool_if:NTF \g_@@_if_opt_draft_bool { \@@_create_squared_draftbox:n { 1.704ex * \l_@@_scale_abs_tl } }{ \begin{tikzpicture} [ /@@ , x=2.4ex, y=2.4ex, line ~ width=0.12ex* \l_@@_scale_abs_tl , scale=#1 ] \filldraw[fill=#2] (0,0) circle [radius=0.33]; \fill (-0.1,0.1) circle [radius=0.05]; \fill (0.1,0.1) circle [radius=0.05]; \draw (-0.2,-0.1) .. controls (-0.1,-0.2) and (0.1,-0.2) .. (0.2,-0.1); \end{tikzpicture}% } } } } % \end{macrocode} %\end{macro} % % %\begin{macro}{ \dSmiley } % Again in \enquote{3D}. % \begin{macrocode} \@@_Declare_Document_Command:nnn { dSmiley } { S O{yellow} } { \@@_provide_savebox_and_use:nT { dSmiley_#1_#2 } { \@@_set_scale_abs_tl:n {#1} \bool_if:NTF \g_@@_if_opt_draft_bool { \@@_create_squared_draftbox:n { 1.584ex * \l_@@_scale_abs_tl } }{ \begin{tikzpicture} [ /@@ , x=2.4ex, y=2.4ex, line ~ width=0.1ex* \l_@@_scale_abs_tl ,scale=#1 ] \shade[ball ~ color=#2] (0,0) circle [radius=0.33]; \shade[ball ~ color=black] (-0.1,0.1) circle [radius=0.05]; \shade[ball ~ color=black] (0.1,0.1) circle [radius=0.05]; \draw[black] (-0.2,-0.1) .. controls (-0.1,-0.2) and (0.1,-0.2) .. (0.2,-0.1); \end{tikzpicture}% } } } % \end{macrocode} %\end{macro} % % % % % % % \begin{macro}{ \Laughey } % It's laughing. % \begin{macrocode} \@@_Declare_Document_Command:nnn { Laughey } { S O{none} O{none} } { \@@_provide_savebox_and_use:nT { Laughey_#1_#2_#3 } { \@@_set_scale_abs_tl:n {#1} \bool_if:NTF \g_@@_if_opt_draft_bool { \@@_create_squared_draftbox:n { 1.704ex * \l_@@_scale_abs_tl } }{ \begin{tikzpicture} [ /@@ , x=2.4ex, y=2.4ex, line ~ width=0.09ex* \l_@@_scale_abs_tl ,scale=#1 ] \filldraw[fill=#2,line ~ width=0.12ex* \l_@@_scale_abs_tl ] (0,0) circle [radius=0.33]; \draw (-0.09,0.06) .. controls (-0.11,0.16) and (-0.17,0.16) .. +(-0.1,0); \draw (0.09,0.06) .. controls (0.11,0.16) and (0.17,0.16) .. +(0.1,0); \filldraw[fill=#3,rounded ~ corners=0.1ex* \l_@@_scale_abs_tl , yshift=-0.5] (-0.22,-0.0) .. controls (-0.13,-0.23) and (0.13,-0.23) .. (0.22,-0.0) -- cycle; \end{tikzpicture}% } } } % \end{macrocode} %\end{macro} % % %\begin{macro}{ \dLaughey } % Also in \emph{3D}! % \begin{macrocode} \@@_Declare_Document_Command:nnn { dLaughey } { S O{yellow} O{red} } { \@@_provide_savebox_and_use:nT { dLaughey_#1_#2_#3 } { \@@_set_scale_abs_tl:n {#1} \bool_if:NTF \g_@@_if_opt_draft_bool { \@@_create_squared_draftbox:n { 1.584ex * \l_@@_scale_abs_tl } }{ \begin{tikzpicture} [ /@@ , x=2.4ex, y=2.4ex, line ~ width=0.09ex* \l_@@_scale_abs_tl ,scale=#1, black ] \fill[ball ~ color=#2,line ~ width=0.12ex* \l_@@_scale_abs_tl ] (0,0) circle [radius=0.33]; \draw (-0.09,0.06) .. controls (-0.11,0.16) and (-0.17,0.16) .. +(-0.1,0); \draw (0.09,0.06) .. controls (0.11,0.16) and (0.17,0.16) .. +(0.1,0); \shade [ ball ~ color=#3, rounded ~ corners=0.1ex* \l_@@_scale_abs_tl , yshift=-0.3 ] (-0.25,-0.0) .. controls (-0.13,-0.26) and (0.13,-0.26) .. (0.25,-0.0) -- cycle; \end{tikzpicture}% } } } % \end{macrocode} %\end{macro} % % % % % % %\begin{macro}{ \Neutrey } % \begin{macrocode} \@@_Declare_Document_Command:nnn { Neutrey } { S O{none} } { \@@_provide_savebox_and_use:nT { Neutrey_#1_#2 } { \@@_set_scale_abs_tl:n {#1} \bool_if:NTF \g_@@_if_opt_draft_bool { \@@_create_squared_draftbox:n { 1.704ex * \l_@@_scale_abs_tl } }{ \begin{tikzpicture} [ /@@ , x=2.4ex, y=2.4ex, line ~ width=0.09ex* \l_@@_scale_abs_tl ,scale=#1 ] \filldraw[fill=#2,line ~ width=0.12ex* \l_@@_scale_abs_tl ] (0,0) circle [radius=0.33]; \fill (0.1,0.1) circle [radius=0.05]; \fill (-0.1,0.1) circle [radius=0.05]; \draw (-0.2,-0.1) -- (0.2,-0.1); \end{tikzpicture}% } } } % \end{macrocode} %\end{macro} % % %\begin{macro}{ \dNeutrey } % \begin{macrocode} \@@_Declare_Document_Command:nnn { dNeutrey } { S O{yellow} } { \@@_provide_savebox_and_use:nT { Neutrey_#1_#2 } { \@@_set_scale_abs_tl:n {#1} \bool_if:NTF \g_@@_if_opt_draft_bool { \@@_create_squared_draftbox:n { 1.584ex * \l_@@_scale_abs_tl } }{ \begin{tikzpicture} [ /@@ , x=2.4ex, y=2.4ex, line ~ width=0.09ex* \l_@@_scale_abs_tl ,scale=#1 ] \shade[ball ~ color=#2] (0,0) circle [radius=0.33]; \shade[ball ~ color=black] (0.1,0.1) circle [radius=0.05]; \shade[ball ~ color=black] (-0.1,0.1) circle [radius=0.05]; \draw[black] (-0.2,-0.1) -- (0.2,-0.1); \end{tikzpicture}% } } } % \end{macrocode} %\end{macro} % % % % % % %\begin{macro}{ \Winkey } % \begin{macrocode} \@@_Declare_Document_Command:nnn { Winkey } { S O{none} } { \@@_provide_savebox_and_use:nT { Winkey_#1_#2 } { \@@_set_scale_abs_tl:n {#1} \bool_if:NTF \g_@@_if_opt_draft_bool { \@@_create_squared_draftbox:n { 1.704ex * \l_@@_scale_abs_tl } }{ \begin{tikzpicture} [ /@@ , x=2.4ex, y=2.4ex, line ~ width=0.12ex* \l_@@_scale_abs_tl ,scale=#1 ] \filldraw[fill=#2] (0,0) circle [radius=0.33]; \draw(0.17,0.1) -- (0.05,0.1); \fill (-0.1,0.1) circle [radius=0.05]; \draw (-0.15,-0.15) .. controls (-0.05,-0.2) and (0.15,-0.2) .. (0.19,0); \end{tikzpicture}% } } } % \end{macrocode} %\end{macro} % % %\begin{macro}{ \oldWinkey } % \begin{macrocode} \@@_Declare_Document_Command:nnn { oldWinkey } { S O{none} } { \@@_provide_savebox_and_use:nT { oldWinkey_#1_#2 } { \@@_set_scale_abs_tl:n {#1} \bool_if:NTF \g_@@_if_opt_draft_bool { \@@_create_squared_draftbox:n { 1.704ex * \l_@@_scale_abs_tl } }{ \begin{tikzpicture} [ /@@ , x=2.4ex, y=2.4ex, line ~ width=0.12ex* \l_@@_scale_abs_tl ,scale=#1 ] \filldraw[fill=#2] (0,0) circle [radius=0.33]; \draw(0.17,0.1) -- (0.05,0.1); \fill (-0.1,0.1) circle [radius=0.05]; \draw (-0.2,-0.1) .. controls (-0.1,-0.2) and (0.15,-0.2) .. (0.2,0); \end{tikzpicture}% } } } % \end{macrocode} %\end{macro} % % %\begin{macro}{ \dWinkey } % \begin{macrocode} \@@_Declare_Document_Command:nnn { dWinkey } { S O{yellow} } { \@@_provide_savebox_and_use:nT { dWinkey_#1_#2 } { \@@_set_scale_abs_tl:n {#1} \bool_if:NTF \g_@@_if_opt_draft_bool { \@@_create_squared_draftbox:n { 1.584ex * \l_@@_scale_abs_tl } }{ \begin{tikzpicture} [ /@@ , x=2.4ex, y=2.4ex, line ~ width=0.12ex* \l_@@_scale_abs_tl ,scale=#1 ] \shade[ball ~ color=#2] (0,0) circle [radius=0.33]; \draw[black] (0.17,0.1) -- (0.05,0.1); \shade[ball ~ color=black] (-0.1,0.1) circle [radius=0.05]; \draw[black] (-0.15,-0.15) .. controls (-0.05,-0.2) and (0.15,-0.2) .. (0.19,0); \end{tikzpicture}% } } } % \end{macrocode} %\end{macro} % %\begin{macro}{ \olddWinkey } % \begin{macrocode} \@@_Declare_Document_Command:nnn { olddWinkey } { S O{yellow} } { \@@_provide_savebox_and_use:nT { olddWinkey_#1_#2 } { \@@_set_scale_abs_tl:n {#1} \bool_if:NTF \g_@@_if_opt_draft_bool { \@@_create_squared_draftbox:n { 1.584ex * \l_@@_scale_abs_tl } }{ \begin{tikzpicture} [ /@@ , x=2.4ex, y=2.4ex, line ~ width=0.12ex* \l_@@_scale_abs_tl ,scale=#1 ] \shade[ball ~ color=#2] (0,0) circle [radius=0.33]; \draw[black] (0.17,0.1) -- (0.05,0.1); \shade[ball ~ color=black] (-0.1,0.1) circle [radius=0.05]; \draw[black] (-0.2,-0.1) .. controls (-0.1,-0.2) and (0.15,-0.2) .. (0.2,0); \end{tikzpicture} } } } % \end{macrocode} %\end{macro} % % % % % % %\begin{macro}{ \Sey } % \begin{macrocode} \@@_Declare_Document_Command:nnn { Sey } { S O{none} } { \@@_provide_savebox_and_use:nT { Sey_#1_#2 } { \@@_set_scale_abs_tl:n {#1} \bool_if:NTF \g_@@_if_opt_draft_bool { \@@_create_squared_draftbox:n { 1.704ex * \l_@@_scale_abs_tl } }{ \begin{tikzpicture} [ /@@ , x=2.4ex, y=2.4ex, line ~ width=0.09ex* \l_@@_scale_abs_tl ,scale=#1 ] \filldraw[fill=#2, line ~ width=0.12ex* \l_@@_scale_abs_tl ] (0,0) circle [radius=0.33]; \fill (0.1,0.1) circle [radius=0.05]; \fill (-0.1,0.1) circle [radius=0.05]; \draw (-0.2,-0.08) .. controls (-0.0,-0.2) and (0.0,0) .. (0.2,-0.12); \end{tikzpicture}% } } } % \end{macrocode} %\end{macro} % % % %\begin{macro}{ \dSey } % \begin{macrocode} \@@_Declare_Document_Command:nnn { dSey } { S O{yellow} } { \@@_provide_savebox_and_use:nT { dSey_#1_#2 } { \@@_set_scale_abs_tl:n {#1} \bool_if:NTF \g_@@_if_opt_draft_bool { \@@_create_squared_draftbox:n { 1.584ex * \l_@@_scale_abs_tl } }{ \begin{tikzpicture} [ /@@ , x=2.4ex, y=2.4ex, line ~ width=0.09ex* \l_@@_scale_abs_tl ,scale=#1 ] \shade[ball ~ color=#2] (0,0) circle [radius=0.33]; \shade[ball ~ color=black] (0.1,0.1) circle [radius=0.05]; \shade[ball ~ color=black] (-0.1,0.1) circle [radius=0.05]; \draw[black] (-0.2,-0.08) .. controls (-0.0,-0.2) and (0.0,0) .. (0.2,-0.12); \end{tikzpicture}% } } } % \end{macrocode} %\end{macro} % % % % % % %\begin{macro}{ \Xey } % \begin{macrocode} \@@_Declare_Document_Command:nnn { Xey } { S O{none} } { \@@_provide_savebox_and_use:nT { Xey_#1_#2 } { \@@_set_scale_abs_tl:n {#1} \bool_if:NTF \g_@@_if_opt_draft_bool { \@@_create_squared_draftbox:n { 1.704ex * \l_@@_scale_abs_tl } }{ \begin{tikzpicture} [ /@@ , x=2.4ex, y=2.4ex, line ~ width=0.09ex* \l_@@_scale_abs_tl ,scale=#1 ] \filldraw[fill=#2, line ~ width=0.12ex* \l_@@_scale_abs_tl ] (0,0) circle [radius=0.33]; \foreach \xi in { 0.05 , -0.15 } \draw (\xi,0.05) -- ++ (0.1,0.1) (-\xi,0.05) -- ++ (-0.1,0.1); \draw (-0.2,-0.15) .. controls (-0.1,-0.06) and (0.1,-0.06) .. (0.2,-0.15); \end{tikzpicture}% } } } % \end{macrocode} %\end{macro} % % %\begin{macro}{ \dXey } % \begin{macrocode} \@@_Declare_Document_Command:nnn { dXey } { S O{yellow} } { \@@_provide_savebox_and_use:nT { dXey_#1_#2 } { \@@_set_scale_abs_tl:n {#1} \bool_if:NTF \g_@@_if_opt_draft_bool { \@@_create_squared_draftbox:n { 1.584ex * \l_@@_scale_abs_tl } }{ \begin{tikzpicture} [ /@@ , x=2.4ex, y=2.4ex, line ~ width=0.09ex* \l_@@_scale_abs_tl ,scale=#1, black ] \fill[ball ~ color=#2, line ~ width=0.12ex* \l_@@_scale_abs_tl ] (0,0) circle [radius=0.33]; \foreach \xi in { 0.05 , -0.15 } \draw (\xi,0.05) -- ++ (0.1,0.1) (-\xi,0.05) -- ++ (-0.1,0.1); \draw (-0.2,-0.15) .. controls (-0.1,-0.06) and (0.1,-0.06) .. (0.2,-0.15); \end{tikzpicture}% } } } % \end{macrocode} %\end{macro} % % % % % % %\begin{macro}{ \Innocey } % \begin{macrocode} \@@_Declare_Document_Command:nnn { Innocey } { S O{none} O{yellow} } { \@@_provide_savebox_and_use:nT { Innocey_#1_#2_#3 } { \@@_set_scale_abs_tl:n {#1} \bool_if:NTF \g_@@_if_opt_draft_bool { \@@_create_draftbox:nn { 1.73ex * \l_@@_scale_abs_tl } { 1.909ex * \l_@@_scale_abs_tl } }{ \begin{tikzpicture} [ /@@ , x=2.4ex, y=2.4ex, line ~ width=0.12ex* \l_@@_scale_abs_tl ,scale=#1 ] \filldraw[fill=#2] (0,0) circle [radius=0.33]; \fill (-0.1,0.1) circle [radius=0.05]; \fill (0.1,0.1) circle [radius=0.05]; \draw (-0.2,-0.1) .. controls (-0.1,-0.2) and (0.1,-0.2) .. (0.2,-0.1); % \end{macrocode} % Draws the colored halo inside, the next two are drawing the black % lines surrounding the colored line and completing the halo. % \begin{macrocode} \draw[#3, line ~ width=0.095ex* \l_@@_scale_abs_tl ] (0.32,0.31) arc [start ~ angle=0, end ~ angle=360, x ~ radius = 0.32 , y ~ radius=0.1]; \draw[line ~ width=0.05ex* \l_@@_scale_abs_tl ] (0.3,0.31) arc [start ~ angle=0, end ~ angle=360, x ~ radius = 0.3 , y ~ radius=0.07]; \draw[line ~ width=0.05ex* \l_@@_scale_abs_tl ] (0.35,0.31) arc [start ~ angle=0, end ~ angle=360, x ~ radius = 0.35 , y ~ radius=0.12]; \end{tikzpicture}% } } } % \end{macrocode} %\end{macro} % % \begin{macro}{ \wInnocey } % A white one. I clear \Makro{g_@@_tikzsymbols_after_symbol_tl} % because otherwise the input of \Option{after-symbol} % is inserted twice. % \begin{macrocode} \@@_Declare_Document_Command:nnn { wInnocey } { S } { \group_begin: \tl_clear:N \l_@@_tikzsymbols_after_symbol_tl \tikzsymbolsuse { Innocey } [#1] [none] [white] \group_end: } % \end{macrocode} %\end{macro} % % %\begin{macro}{ \dInnocey } % \begin{macrocode} \@@_Declare_Document_Command:nnn { dInnocey } { S O{yellow} O{yellow} } { \@@_provide_savebox_and_use:nT { dInnocey_#1_#2_#3 } { \@@_set_scale_abs_tl:n {#1} \bool_if:NTF \g_@@_if_opt_draft_bool { \@@_create_draftbox:nn { 1.73ex * \l_@@_scale_abs_tl } { 1.849ex * \l_@@_scale_abs_tl } }{ \begin{tikzpicture} [ /@@ , x=2.4ex, y=2.4ex, line ~ width=0.12ex* \l_@@_scale_abs_tl ,scale=#1, black ] \shade[ball ~ color=#2] (0,0) circle [radius=0.33]; \shade[ball ~ color=black] (-0.1,0.1) circle [radius=0.05]; \shade[ball ~ color=black] (0.1,0.1) circle [radius=0.05]; \draw[black] (-0.2,-0.1) .. controls (-0.1,-0.2) and (0.1,-0.2) .. (0.2,-0.1); % \end{macrocode} % Same as above (I think). % \begin{macrocode} \draw[color=#3!97!black, line ~ width=0.1ex* \l_@@_scale_abs_tl ] (0.32,0.31) arc [start ~ angle=0, end ~ angle=360, x ~ radius = 0.32 , y ~ radius=0.1]; \draw[line ~ width=0.05ex* \l_@@_scale_abs_tl ] (0.3,0.31) arc [start ~ angle=0, end ~ angle=360, x ~ radius = 0.3 , y ~ radius=0.07]; \draw[line ~ width=0.05ex* \l_@@_scale_abs_tl ] (0.35,0.31) arc [start ~ angle=0, end ~ angle=360, x ~ radius = 0.35 , y ~ radius=0.12]; \end{tikzpicture}% } } } % \end{macrocode} %\end{macro} % % % % % % %\begin{macro}{ \Cooley } % It's the coolest Smiley around. % \begin{macrocode} \@@_Declare_Document_Command:nnn { Cooley } { S O{none} } { \@@_provide_savebox_and_use:nT { Cooley_#1_#2 } { \@@_set_scale_abs_tl:n {#1} \bool_if:NTF \g_@@_if_opt_draft_bool { \@@_create_squared_draftbox:n { 1.704ex * \l_@@_scale_abs_tl } }{ \begin{tikzpicture} [ /@@ , x=2.4ex, y=2.4ex, line ~ width=0.12ex* \l_@@_scale_abs_tl ,scale=#1 ] \filldraw[fill=#2] (0,0) circle [radius=0.33]; \foreach \xi/\xii in { 0.24/0.01 , -0.24/-0.01 } \fill[rounded ~ corners=0.1ex* \l_@@_scale_abs_tl ] (\xi,0.15) -- (\xii,0.15) -- (\xii,0) -- (\xi,0) -- cycle; \draw (-0.2,-0.1) .. controls (-0.1,-0.2) and (0.1,-0.2) .. (0.2,-0.1); \draw (0.02,0.1) -- (-0.02,0.1); \draw (-0.2,0.1) -- (-0.3,0.13); \draw (0.2,0.1) -- (0.3,0.13); \end{tikzpicture}% } } } % \end{macrocode} %\end{macro} % % %\begin{macro}{ \dCooley } % \begin{macrocode} \@@_Declare_Document_Command:nnn { dCooley } { S O{yellow} } { \@@_provide_savebox_and_use:nT { dCooley_#1_#2 } { \@@_set_scale_abs_tl:n {#1} \bool_if:NTF \g_@@_if_opt_draft_bool { \@@_create_squared_draftbox:n { 1.584ex * \l_@@_scale_abs_tl } }{ \begin{tikzpicture} [ /@@ , x=2.4ex, y=2.4ex, line ~ width=0.12ex* \l_@@_scale_abs_tl ,scale=#1 ] \shade[ball ~ color=#2] (0,0) circle [radius=0.33]; \draw[black] (0.02,0.1) -- (-0.02,0.1); \draw[black] (-0.2,0.1) -- (-0.295,0.146); \draw[black] (0.2,0.1) -- (0.295,0.146); \foreach \xi/\xii in { 0.24/0.01 , -0.24/-0.01 } \shade[ball ~ color=black,rounded ~ corners=0.1ex* \l_@@_scale_abs_tl ] (\xi,0.15) -- (\xii,0.15) -- (\xii,0) -- (\xi,0) -- cycle; \draw[black] (-0.2,-0.1) .. controls (-0.1,-0.2) and (0.1,-0.2) .. (0.2,-0.1); \end{tikzpicture}% } } } % \end{macrocode} %\end{macro} % % % % % % %\begin{macro}{ \Tongey } % Habe mir vorgenommen das hier zu verbessern, wird aber wohl noch % etwas brauchen. % \begin{macrocode} \@@_Declare_Document_Command:nnn { Tongey } { S O{none} O{none} } { \@@_provide_savebox_and_use:nT { Tongey_#1_#2_#3 } { \@@_set_scale_abs_tl:n {#1} \bool_if:NTF \g_@@_if_opt_draft_bool { \@@_create_squared_draftbox:n { 1.704ex * \l_@@_scale_abs_tl } }{ \begin{tikzpicture} [ /@@ , x=2.4ex, y=2.4ex, line ~ width=0.12ex* \l_@@_scale_abs_tl ,scale=#1 ] \filldraw[fill=#2] (0,0) circle [radius=0.33]; \fill (-0.1,0.1) circle [radius=0.05]; \fill (0.1,0.1) circle [radius=0.05]; \filldraw [ fill=#3, line ~ width=0.058ex* \l_@@_scale_abs_tl , rounded ~ corners=0.12ex* \l_@@_scale_abs_tl ] (0,-0.09) -- (0.05,-0.2) -- (0.16,-0.23) -- (0.2,-0.15) -- (0.19,-0.03); \draw[line ~ width=0.07ex* \l_@@_scale_abs_tl , yshift=0.21ex] (-0.2,-0.1) .. controls (-0.1,-0.2) and (0.1,-0.2) .. (0.2,-0.1); \end{tikzpicture}% } } } % \end{macrocode} %\end{macro} % % %\begin{macro}{ \dTongey } % \begin{macrocode} \@@_Declare_Document_Command:nnn { dTongey } { S O{yellow} O{red} } { \@@_provide_savebox_and_use:nT { dTongey_#1_#2_#3 } { \@@_set_scale_abs_tl:n {#1} \bool_if:NTF \g_@@_if_opt_draft_bool { \@@_create_squared_draftbox:n { 1.584ex * \l_@@_scale_abs_tl } }{ \begin{tikzpicture} [ /@@ , x=2.4ex, y=2.4ex, line ~ width=0.12ex* \l_@@_scale_abs_tl ,scale=#1 ] \shade[ball ~ color=#2] (0,0) circle [radius=0.33]; \shade[ball ~ color=black] (-0.1,0.1) circle [radius=0.05]; \shade[ball ~ color=black] (0.1,0.1) circle [radius=0.05]; \shadedraw [ ball ~ color=#3, draw=black,line ~ width=0.058ex* \l_@@_scale_abs_tl , rounded ~ corners=0.12ex* \l_@@_scale_abs_tl ] (0,-0.09) -- (0.05,-0.2) -- (0.16,-0.23) -- (0.2,-0.15) -- (0.19,-0.03); \draw[black, line ~ width=0.07ex* \l_@@_scale_abs_tl , yshift=0.21ex] (-0.2,-0.1) .. controls (-0.1,-0.2) and (0.1,-0.2) .. (0.2,-0.1); \end{tikzpicture}% } } } % \end{macrocode} %\end{macro} % % % % % % %\begin{macro}{ \Nursey } % \begin{macrocode} \@@_Declare_Document_Command:nnn { Nursey } { S O{none} O{none} O{} } { \@@_provide_savebox_and_use:nT { Nursey_#1_#2_#3_#4 } { \@@_set_scale_abs_tl:n {#1} \bool_if:NTF \g_@@_if_opt_draft_bool { \@@_create_draftbox:nn { 1.5ex * \l_@@_scale_abs_tl } { 2.19ex * \l_@@_scale_abs_tl } }{ \begin{tikzpicture} [ /@@ , x=2.3ex, y=2.3ex, line ~ width=0.12ex* \l_@@_scale_abs_tl ,scale=#1 ] \fill[fill=#3,rounded ~ corners=.023ex* \l_@@_scale_abs_tl ] (-0.3,0) -- (-0.3,0.3) -- (0,0.6) -- (0.3,0.3) -- (0.3,0); \filldraw[fill=#2] (0,0) circle [radius=0.3]; \fill (-0.1,0.1) circle [radius=0.05]; \fill (0.1,0.1) circle [radius=0.05]; \draw[line ~ width=0.09ex* \l_@@_scale_abs_tl , yshift=0.07ex] (-0.2,-0.1) .. controls (-0.1,-0.2) and (0.1,-0.2) .. (0.2,-0.1); \draw[rounded ~ corners=.023ex* \l_@@_scale_abs_tl ] (-0.3,0) -- (-0.3,0.3) -- (0,0.6) -- (0.3,0.3) -- (0.3,0); \draw[#4,line ~ width=.046ex* \l_@@_scale_abs_tl ] (0,0.35) -- (0,0.5) (-0.05,0.45) -- (0.05,0.45) ; \end{tikzpicture}% } } } % \end{macrocode} %\end{macro} % % %\begin{macro}{ \dNursey } % \begin{macrocode} \@@_Declare_Document_Command:nnn { dNursey } { S O{yellow} O{white} O{red} } { \@@_provide_savebox_and_use:nT { dNursey_#1_#2_#3_#4 } { \@@_set_scale_abs_tl:n {#1} \bool_if:NTF \g_@@_if_opt_draft_bool { \@@_create_draftbox:nn { 1.38ex * \l_@@_scale_abs_tl } { 1.98ex * \l_@@_scale_abs_tl } }{ \begin{tikzpicture} [ /@@ , x=2.3ex, y=2.3ex, line ~ width=0.12ex* \l_@@_scale_abs_tl ,scale=#1 ] \shade[ball ~ color=#2] (0,0) circle [radius=0.3]; \shade[ball ~ color=black] (-0.1,0.1) circle [radius=0.05]; \shade[ball ~ color=black] (0.1,0.1) circle [radius=0.05]; \draw[black, line ~ width=0.09ex* \l_@@_scale_abs_tl , yshift=0.07ex] (-0.2,-0.1) .. controls (-0.1,-0.2) and (0.1,-0.2) .. (0.2,-0.1); \shade [ ball ~ color=#3, rounded ~ corners=.023ex* \l_@@_scale_abs_tl , yshift=-0.09ex ] (-0.3,0) -- (-0.3,0.3) -- (0,0.6) -- (0.3,0.3) -- (0.3,0) arc [start ~ angle=0, end ~ angle=180, radius=0.3]; \shade[ball ~ color=#4,line ~ width=.046ex* \l_@@_scale_abs_tl ] (-0.01,0.31) -- (-0.01,0.46) -- (0.01,0.46) -- (0.01,0.31)--cycle; \shade[ball ~ color=#4,line ~ width=.046ex* \l_@@_scale_abs_tl ] (-0.05,0.4) -- (0.05,0.4) -- (0.05,0.42) -- (-0.05,0.42) -- cycle; \end{tikzpicture}% } } } % \end{macrocode} %\end{macro} % % % % % % %\begin{macro}{ \Vomey } % \begin{macrocode} \@@_Declare_Document_Command:nnn { Vomey } { S O{none} O{opacity=0} } { \@@_provide_savebox_and_use:nT { Vomey_#1_#2_#3 } { \@@_set_scale_abs_tl:n {#1} \bool_if:NTF \g_@@_if_opt_draft_bool { \@@_create_draftbox:nn { 3.0335ex * \l_@@_scale_abs_tl } { 1.743ex * \l_@@_scale_abs_tl } }{ \begin{tikzpicture} [ /@@ , x=0.58ex,y=0.58ex, line ~ width=0.09ex* \l_@@_scale_abs_tl ,scale=#1 ] \filldraw[fill=#2,rounded ~ corners=0.05ex* \l_@@_scale_abs_tl ] (0,0) arc [start ~ angle=15, end ~ angle=330, radius=1] -- (-0.6,-0.3) -- cycle; \draw[line ~ width=0.05ex* \l_@@_scale_abs_tl ] (-0.5,0.3) -- (-0.3,0.1); \fill (-0.45,0.27) arc [start ~ angle=100, end ~ angle=350, radius=0.1]; \fill[#3] (1.8,-0.5) .. controls (2.5,-0.3) and (2.8,-0.7) .. (2.5,-1) .. controls (3,-1) and (3,-1.7) .. (2,-1.5) .. controls (1.7,-2) and (1,-2) .. (1,-1.5) .. controls (0.5,-1.9) and (0.3,-1) .. (0.7,-0.9); \fill[#3] (0,-0.4) .. controls (1,0) and (2,-1) .. (2,-1) .. controls (1.7,-1.2) and (1.3,-1.2) .. (1,-1) .. controls (0.8,-0.7) and (0.5,-0.5) .. (0,-0.4); % \draw (0,-0.4) .. controls (1,0) and (2,-1) .. (2,-1); % \draw (0,-0.4) .. controls (0.5,-0.5) and (0.8,-0.7) .. (1,-1); \draw[rounded ~ corners=0.1ex* \l_@@_scale_abs_tl ] (1,-1) .. controls (0.8,-0.7) and (0.5,-0.5) .. (0,-0.4) .. controls (1,0) and (2,-1) .. (2,-1); \draw (1.8,-0.5) .. controls (2.5,-0.3) and (2.8,-0.7) .. (2.5,-1) .. controls (3,-1) and (3,-1.7) .. (2,-1.5) .. controls (1.7,-2) and (1,-2) .. (1,-1.5) .. controls (0.5,-1.9) and (0.3,-1) .. (0.7,-0.9); \end{tikzpicture}% } } } % \end{macrocode} %\end{macro} % %\begin{macro}{ \dVomey } % \begin{macrocode} \@@_Declare_Document_Command:nnn { dVomey } { S O{yellow} O{brown!10!olive} } { \@@_provide_savebox_and_use:nT { dVomey_#1_#2_#3 } { \@@_set_scale_abs_tl:n {#1} \bool_if:NTF \g_@@_if_opt_draft_bool { \@@_create_draftbox:nn { 3.2435ex * \l_@@_scale_abs_tl } { 1.653ex * \l_@@_scale_abs_tl } }{ \begin{tikzpicture} [ /@@ , x=0.58ex,y=0.58ex, line ~ width=0.09ex* \l_@@_scale_abs_tl ,scale=#1 ] \shade [ ball ~ color=#2!90!brown, rounded ~ corners=0.03ex * \l_@@_scale_abs_tl , ] (0,0) arc [start ~ angle=15, end ~ angle=330, radius=1] -- (-0.6,-0.3) -- cycle; \draw[black, line ~ width=0.05ex* \l_@@_scale_abs_tl ] (-0.5,0.3) -- (-0.3,0.1); \shade[ball ~ color=black] (-0.45,0.27) arc [start ~ angle=100, end ~ angle=350, radius=0.1]; \shade[ball ~ color=#3] (1.8,-0.5) .. controls (2.5,-0.3) and (2.8,-0.7) .. (2.5,-1) .. controls (3,-1) and (3,-1.7) .. (2,-1.5) .. controls (1.7,-2) and (1,-2) .. (1,-1.5) .. controls (0.5,-1.9) and (0.3,-1) .. (0.7,-0.9); \shade[ball ~ color=#3] (0,-0.4) .. controls (1,0) and (2,-1) .. (2,-1) .. controls (1.7,-1.2) and (1.3,-1.2) .. (1,-1) .. controls (0.8,-0.7) and (0.5,-0.5) .. (0,-0.4); \end{tikzpicture}% } } } % \end{macrocode} %\end{macro} % % % % % % %\begin{macro}{ \Walley } % \begin{macrocode} \@@_Declare_Document_Command:nnn { Walley } { S O{none} O{none} } { \@@_provide_savebox_and_use:nT { Walley_#1_#2_#3 } { \@@_set_scale_abs_tl:n {#1} \bool_if:NTF \g_@@_if_opt_draft_bool { \@@_create_draftbox:nn { 2.341ex * \l_@@_scale_abs_tl } { 1.674ex * \l_@@_scale_abs_tl } }{ \begin{tikzpicture} [ /@@ , x=2.4ex, y=2.4ex, line ~ width=0.09ex* \l_@@_scale_abs_tl ,scale=#1, decoration= { % random ~ steps, segment ~ length=0.15ex* \l_@@_scale_abs_tl , amplitude=0.1ex* \l_@@_scale_abs_tl } ] \filldraw[fill=#2, line ~ width=0.08ex* \l_@@_scale_abs_tl ] (0,0) circle [radius=0.28]; \filldraw[fill=#3] (0.28,-0.33) rectangle (0.66,0.33); \draw[line ~ width=0.06ex* \l_@@_scale_abs_tl ] (0.28,0) --++(0.05,0.07) --++(0.03,0.02) --+ +(0.03,-0.02) --++(0.03,0.1) --++(0.03,0.02) -- (0.5,0.25); \draw[line ~ width=0.06ex* \l_@@_scale_abs_tl ] (0.28,0) --++(0.06,-0.02) --++(0.04,0.06) --++ (0.0,-0.08) --++(0.08,0.06) --++(0.03,-0.02) --+ (0.08,0.02) -- (0.6,0.0); \draw[line ~ width=0.06ex* \l_@@_scale_abs_tl ] (0.28,0) --++(0.03,-0.02) --++(0.03,-0.07) --+ +(0.03,-0.01) --++(0.01,-0.07) --++(0.06,0.01) --++ (0.03,-0.08) -- (0.5,0.-0.25); \draw[rotate=-20] (0.12,0.1) -- (0.2,0.05); \draw[rotate=-20] (0.27,-0.1) .. controls (0.2,-0.072) and (0.1,-0.06) .. (0.,-0.1); \end{tikzpicture}% } } } % \end{macrocode} %\end{macro} % %\begin{macro}{ \rWalley } % \begin{macrocode} \@@_Declare_Document_Command:nnn { rWalley } { S O{none} O{none} } { \@@_provide_savebox_and_use:nT { rWalley_#1_#2_#3 } { \@@_set_scale_abs_tl:n {#1} \bool_if:NTF \g_@@_if_opt_draft_bool { \@@_create_draftbox:nn { 2.341ex * \l_@@_scale_abs_tl } { 1.674ex * \l_@@_scale_abs_tl } }{ \begin{tikzpicture} [ /@@ , x=2.4ex, y=2.4ex, line ~ width=0.09ex* \l_@@_scale_abs_tl ,scale=#1, decoration= { random ~ steps, segment ~ length=0.15ex* \l_@@_scale_abs_tl , amplitude=0.1ex* \l_@@_scale_abs_tl } ] \filldraw[fill=#2, line ~ width=0.08ex* \l_@@_scale_abs_tl ] (0,0) circle [radius=0.28]; \filldraw[fill=#3] (0.28,-0.33) rectangle (0.66,0.33); \foreach \x/\y in { 0.5/0.25 , 0.6/0 , 0.5/-0.25 } \draw[decorate, line ~ width=0.06ex* \l_@@_scale_abs_tl ] (0.28,0) -- (\x,\y); \draw[rotate=-20] (0.12,0.1) -- (0.2,0.05); \draw[rotate=-20] (0.27,-0.1) .. controls (0.2,-0.072) and (0.1,-0.06) .. (0.,-0.1); \end{tikzpicture}% } } } % \end{macrocode} %\end{macro} % %\begin{macro}{ \dWalley } % \begin{macrocode} \@@_Declare_Document_Command:nnn { dWalley } { S O{yellow} } { \@@_provide_savebox_and_use:nT { dWalley_#1_#2 } { \@@_set_scale_abs_tl:n {#1} \bool_if:NTF \g_@@_if_opt_draft_bool { \@@_create_draftbox:nn { 2.4288ex * \l_@@_scale_abs_tl } { 1.6008ex * \l_@@_scale_abs_tl } }{ \begin{tikzpicture} [ /@@ , x=2.4ex, y=2.4ex, line ~ width=0.09ex* \l_@@_scale_abs_tl ,scale=#1, black ] \shade[ball ~ color=orange!80!black] (0.298,-0.33) rectangle (0.692,0.337); \draw[line ~ width=0.06ex* \l_@@_scale_abs_tl ] (0.28,0) --++(0.05,0.07) --++(0.03,0.02) --+ +(0.03,-0.02) --++(0.03,0.1) --++(0.03,0.02) -- (0.5,0.25); \draw[line ~ width=0.06ex* \l_@@_scale_abs_tl ] (0.28,0) --++(0.06,-0.02) --++(0.04,0.06) --++ (0.0,-0.08) --++(0.08,0.06) --++(0.03,-0.02) --+ (0.08,0.02) -- (0.6,0.0); \draw[line ~ width=0.06ex* \l_@@_scale_abs_tl ] (0.28,0) --++(0.03,-0.02) --++(0.03,-0.07) --++ (0.03,-0.01) --++(0.01,-0.07) --++ (0.06,0.01) --++(0.03,-0.08) -- (0.5,0.-0.25); \shade[ball ~ color=#2] (-0.01,0) circle [radius=0.31]; \draw[rotate=-20] (0.12,0.1) -- (0.2,0.05); \draw[rotate=-20] (0.283,-0.1) .. controls (0.2,-0.072) and (0.1,-0.06) .. (0,-0.1); \end{tikzpicture}% } } } % \end{macrocode} %\end{macro} % %\begin{macro}{ \drWalley } % \begin{macrocode} \@@_Declare_Document_Command:nnn { drWalley } { S O{yellow} } { \@@_provide_savebox_and_use:nT { drWalley_#1_#2 } { \@@_set_scale_abs_tl:n {#1} \bool_if:NTF \g_@@_if_opt_draft_bool { \@@_create_draftbox:nn { 2.4288ex * \l_@@_scale_abs_tl } { 1.6008ex * \l_@@_scale_abs_tl } }{ \begin{tikzpicture} [ /@@ , x=2.4ex, y=2.4ex, line ~ width=0.09ex* \l_@@_scale_abs_tl , scale=#1, black, decoration= { random ~ steps,segment ~ length=0.15ex* \l_@@_scale_abs_tl , amplitude=0.1ex* \l_@@_scale_abs_tl } ] \shade[ball ~ color=orange!80!black] (0.298,-0.33) rectangle (0.692,0.337); \foreach \x/\y in { 0.5/0.25 , 0.6/0 , 0.5/-0.25 } \draw[decorate, line ~ width=0.06ex* \l_@@_scale_abs_tl ] (0.298,0) -- (\x,\y); \shade[ball ~ color=#2] (-0.01,0) circle [radius=0.31]; \draw[rotate=-20] (0.12,0.1) -- (0.2,0.05); \draw[rotate=-20] (0.283,-0.1) .. controls (0.2,-0.072) and (0.1,-0.06) .. (0.,-0.1); \end{tikzpicture}% } } } % \end{macrocode} %\end{macro} % % % \begin{macro}{ \@@_Cat:n, \@@_Cat_unknown:n, \@@_Cat_dead:n } % \begin{macrocode} \cs_new:Npn \@@_Cat:n #1 { \draw (0,0) circle [radius=0.3]; \foreach \xi/\xii in { 0.3/0.35 } { \draw[rounded ~ corners=0.163ex* \l_@@_scale_abs_tl ] (-\xi,0) -- (-\xii,0.5) -- (0,\xi) (0,\xi) -- (\xii,0.5) -- (\xi,0); } \fill (-0.15,.15) circle [radius=0.05]; \fill (0.15,.15) circle [radius=0.05]; \foreach \x in { 0.1 , -0.1 } \draw[rounded ~ corners=0.175ex* \l_@@_scale_abs_tl ,yshift=-0.12ex] (0,0) -- (0,-0.1) -- (\x,-0.095); \draw[rounded ~ corners=.12ex* \l_@@_scale_abs_tl ,yshift=-.15ex, line ~ width=0.03em*0.9* \l_@@_scale_abs_tl ] (-0.1,0.1) -- (0,0) -- (0.1,0.1) -- cycle ; \foreach \a/\b/\c/\d in { 0.1/0.25/0.35/0.4 , -0.1/-0.25/-0.35/-0.4 } \foreach \yi/\yii/\yiii in { 0/0/-0.05 , -0.01/-0.09/-0.14 , -0.045/-0.13/-0.23 } { \draw[line ~ width=0.035ex* \l_@@_scale_abs_tl ] (\a,-0.05)..controls(\b,\yi)and(\c,\yii).. (\d,\yiii); } } \cs_new:Npn \@@_Cat_unknown:n #1 { \draw (0,0) circle [radius=0.3]; \foreach \xi/\xii in { 0.3/0.35 } { \draw[rounded ~ corners=0.163ex* \l_@@_scale_abs_tl ] (-\xi,0) -- (-\xii,0.5) -- (0,\xi) (0,\xi) -- (\xii,0.5) -- (\xi,0); } \fill (0,-0.18) circle [radius=0.04]; \draw (0,0.06) arc[start ~angle=-90, end ~angle=180, radius=0.075] (0,0.06) arc[start ~angle=90, end ~angle=360, radius=0.075]; \foreach \case in { 1,-1 } \foreach \yi/\yii/\yiii in { -0.01/-0.05/-0.08 , -0.02/-0.12/-0.16 , -0.055/-0.15/-0.25 }{ \draw[line ~ width=0.035ex* \l_@@_scale_abs_tl ] ({0.1*\case},-0.05)..controls({\case*0.25},\yi) and({0.35*\case},\yii).. ({0.4*\case},\yiii); } } \cs_new:Npn \@@_Cat_dead:n #1 { \draw (0,0) circle [radius=0.3]; \foreach \case in { 1,-1 } { \draw[rounded ~ corners=0.163ex* \l_@@_scale_abs_tl ] ({\case*0.3},0) -- ({\case*0.35},0.5) -- (0,0.3); } \draw \foreach \angle in { 45,135,225,315 } { (0.13,0.13) -- ({0.13+0.07*cos(\angle)},{0.13+0.07*sin(\angle)}) (-0.13,0.13) -- ({-0.13+0.07*cos(\angle)},{0.13+0.07*sin(\angle)}) } ; \foreach \case in { 1,-1 } \draw[rounded ~ corners=0.175ex* \l_@@_scale_abs_tl ,yshift=-0.12ex] (0,0) -- (0,-0.08) -- ({0.09*\case},-0.12); \draw[rounded ~ corners=.12ex* \l_@@_scale_abs_tl ,yshift=-.15ex, line ~ width=0.03em*0.9* \l_@@_scale_abs_tl ] (0,0) -- (0.1,0.07) -- (0,0.1)-- (-0.1,0.07) -- cycle ; \foreach \case in {-1,1} \foreach \yi/\yii/\yiii in { -0.04/-0.09/-0.15 , -0.05/-0.18/-0.23, -0.085/-0.22/-0.31 }{ \draw[line ~ width=0.035ex* \l_@@_scale_abs_tl ] ({0.1*\case},-0.05) .. controls ({0.18*\case},\yi) and ({0.28*\case},\yii) .. ({0.33*\case},\yiii); } \draw [transparent,line ~ width=0.035ex*\l_@@_scale_abs_tl] (-0.4,0) -- (0.4,0); } % \end{macrocode} % \end{macro} % %\begin{macro}{ \Cat } % It is a Ket! (sic!) % \begin{macrocode} \@@_Declare_Document_Command:nnn { Cat } { S } { \@@_provide_savebox_and_use:nT { Cat_#1 } { \@@_set_scale_abs_tl:n {#1} \bool_if:NTF \g_@@_if_opt_draft_bool { \@@_create_draftbox:nn { 1.899ex * \l_@@_scale_abs_tl } { 1.957ex * \l_@@_scale_abs_tl } }{ \begin{tikzpicture} [ /@@ , x=2.33ex,y=2.33ex, line ~ width=0.093ex* \l_@@_scale_abs_tl ,scale=#1 ] \@@_Cat:n {#1} \end{tikzpicture}% } } } % \end{macrocode} %\end{macro} % % % %\begin{macro}{ \SchrodingersCat } % It is a Ket! (sic!) % \begin{macrocode} \@@_Declare_Document_Command:nnn { SchrodingersCat } { S m } { \@@_provide_savebox_and_use:nT { SchrodingersCat_#1_#2 } { \@@_set_scale_abs_tl:n {#1} \bool_if:NTF \g_@@_if_opt_draft_bool { \@@_create_draftbox:nn { 1.899ex * \l_@@_scale_abs_tl } { 1.957ex * \l_@@_scale_abs_tl } }{ \begin{tikzpicture} [ /@@ , x=2.33ex,y=2.33ex, line ~ width=0.093ex* \l_@@_scale_abs_tl ,scale=#1 ] \int_case:nnF {#2} { { 1 } { \@@_Cat:n {#1} } { 0 } { \@@_Cat_unknown:n {#1} } { -1 } { \@@_Cat_dead:n {#1} } } { \msg_error:nnn { tikzsymbols } { SchrodingersCat } {#2} } \end{tikzpicture}% } } } % \end{macrocode} %\end{macro} % % % % % % \begin{macro}{ \Ninja } % It can hide. % \begin{macrocode} \@@_Declare_Document_Command:nnn { Ninja } { S O{black} O{red} O{white} } { \@@_provide_savebox_and_use:nT { Ninja_#1_#2_#3_#4 } { \@@_set_scale_abs_tl:n {#1} \bool_if:NTF \g_@@_if_opt_draft_bool { \@@_create_draftbox:nn { 2.149ex * \l_@@_scale_abs_tl } { 1.717ex * \l_@@_scale_abs_tl } }{ \begin{tikzpicture} [ /@@ , x=2.4ex, y=2.4ex, line ~ width=0.09ex* \l_@@_scale_abs_tl , scale=#1, decoration= { random ~ steps,segment ~ length=0.1ex* \l_@@_scale_abs_tl , amplitude=0.1ex* \l_@@_scale_abs_tl } ] \tl_set:Nn \l_tmpa_tl {#2} \fill[#2] (0,0) circle [radius=0.33]; \fill[decoration={random ~ steps,segment ~ length=0.1ex* \l_@@_scale_abs_tl , amplitude=0.01ex* \l_@@_scale_abs_tl }, decorate,#3] (-0.33,0) -- (0.33,0) -- (0.23,0.23) -- (-0.23,0.23) -- cycle; \tl_if_eq:NNT \c_@@_black_tl \l_tmpa_tl { \draw[line ~ width=0.08ex* \l_@@_scale_abs_tl ] (0,0) circle [radius=0.33]; } \fill[#3] (0,0.1) -- (-0.33,0) -- (-0.26,0.23); \fill[#3] (0.3465,0) arc [start ~ angle=0, end ~ angle=42, x ~ radius=0.34, y~ radius=0.345] -- (0.2,0.23)-- (0.31,0.0) -- cycle; \fill[#3] (-0.3465,0) arc [start ~ angle=0, end ~ angle=-42, x ~ radius=-0.34, y~ radius=-0.345] -- (-0.2,0.23)-- (-0.31,0.0) -- cycle; \fill[#4] (0.129,0.1425) arc [start ~ angle=55, end ~ angle=-180, radius=0.05]; \fill[#4] (-0.129,0.1425) arc [start ~ angle=-55, end ~ angle=180, radius=-0.05]; \foreach \x in { (0.5,0.35) , (0.53,0.1) } \draw [ decorate,decoration= { snake,amplitude=.1ex* \l_@@_scale_abs_tl , segment ~ length=0.55ex* \l_@@_scale_abs_tl } , #3 ] (0.26,0.21) -- \x; \tl_if_eq:NNF \c_@@_black_tl \l_tmpa_tl { \draw[line ~ width=0.08ex* \l_@@_scale_abs_tl ] (0,0) circle [radius=0.33]; } \end{tikzpicture}% } } } % \end{macrocode} %\end{macro} % % %\begin{macro}{ \dNinja } % \begin{macrocode} \@@_Declare_Document_Command:nnn { dNinja } { S O{black} O{red} O{white} } { \@@_provide_savebox_and_use:nT { dNinja_#1_#2_#3_#4 } { \@@_set_scale_abs_tl:n {#1} \bool_if:NTF \g_@@_if_opt_draft_bool { \@@_create_draftbox:nn { 2.1498ex * \l_@@_scale_abs_tl } { 1.7178ex * \l_@@_scale_abs_tl } }{ \begin{tikzpicture} [ /@@ , x=2.4ex, y=2.4ex, line ~ width=0.09ex* \l_@@_scale_abs_tl , scale=#1, decoration= { random ~ steps,segment ~ length=0.1ex* \l_@@_scale_abs_tl , amplitude=0.1ex* \l_@@_scale_abs_tl } ] \foreach \length/\coord in { 0.55/{(0.5,0.35)} , 0.5/{(0.53,0.1)} } \draw [ decorate,decoration= { snake,amplitude=.1ex* \l_@@_scale_abs_tl , segment ~ length=\length ex* \l_@@_scale_abs_tl } , decorate, #3!50!black ] \coord -- (0.26,0.21); \shade[ball ~ color=#2] (0,0) circle [radius=0.347]; \fill [ decoration= { random ~ steps,segment ~ length=0.1ex* \l_@@_scale_abs_tl , amplitude=0.01ex* \l_@@_scale_abs_tl } , ball ~ color=#3 ] decorate {(-0.33,0) -- (0.3465,0) } {arc [start ~ angle=0, end ~ angle=42, x ~ radius=0.34,y~ radius=0.345]} decorate {-- (-0.25,0.24)} { arc [start ~ angle=-42, end ~ angle=0, x ~ radius=-0.375,y~ radius=-0.345]}; % Frag mich nicht, was das macht. % \shade[ball ~ color=#4] (0.129,0.1425) arc [start ~ angle=55, end ~ angle=-180, radius=0.05]; % \shade[ball ~ color=#4] (-0.129,0.1425) arc [start ~ angle=-55, end ~ angle=180, radius=-0.05]; \shade[top ~ color=#4!80!black, bottom ~ color=#4] (0.129,0.1425) arc [start ~ angle=55, end ~ angle=-180, radius=0.05]; \shade[top ~ color=#4!80!black, bottom ~ color=#4] (-0.129,0.1425) arc [start ~ angle=-55, end ~ angle=180, radius=-0.05]; \end{tikzpicture}% } } } % \end{macrocode} %\end{macro} % % % % % \begin{macro}{ \Sleepey } % It is sleeping. % \begin{macrocode} \@@_Declare_Document_Command:nnn { Sleepey } { S O{none} O{none} O{black} } { \@@_provide_savebox_and_use:nT { Sleepey_#1_#2_#3_#4 } { \@@_set_scale_abs_tl:n {#1} \bool_if:NTF \g_@@_if_opt_draft_bool { \@@_create_draftbox:nn { 2.084866ex * \l_@@_scale_abs_tl } { 1.5912ex * \l_@@_scale_abs_tl } }{ \begin{tikzpicture} [ /@@ , x=2.04ex, y=2.04ex, line ~ width=0.102ex* \l_@@_scale_abs_tl , scale=#1 ] % %% Hat \filldraw [fill=#3] (-0.33,0) arc[start~angle=180,end~angle=0,x~radius=0.45,y~radius=0.4] -- ++(0,-0.2) arc[start~angle=0,end~angle=130,x~radius=0.15,y~radius=0.24]; % %% face \filldraw [fill=#2,rounded ~ corners=0.001ex * \l_@@_scale_abs_tl] (0.33,0) arc[start~angle=0, end~angle=-180, radius=0.33] -- cycle ; % %% Pommel \fill (0.55,-0.15) circle [radius=0.06]; \foreach \l_@@_angle_tl in {0,30,60,...,360} { \draw ({0.55+0.06*cos(\l_@@_angle_tl)*1.2}, {-0.15+0.06*sin(\l_@@_angle_tl)*1.2}) circle[radius=0.02]; } % %% Stars \foreach \l_tmpa_tl/\l_tmpb_tl in { -0.14/0.12 , 0.19/0.12 , 0.05/0.26 , 0.40/0.16 } { \draw [line~width=0.04ex*\l_@@_scale_abs_tl ,#4] \foreach \l_@@_angle_tl in { 0,45,90,...,360 } { (\l_tmpa_tl,\l_tmpb_tl) -- ({\l_tmpa_tl+0.07*cos(\l_@@_angle_tl)}, {\l_tmpb_tl+0.07*sin(\l_@@_angle_tl)}) } ; } % %% Mouth \fill (0,-0.225) circle [radius=0.04]; % %% Eyes \draw (-0.1,-0.09) arc[start~angle=0, end~angle=-180, x~radius=0.06,y~radius=0.08] ; \draw (0.1,-0.09) arc[start~angle=180, end~angle=360,x~radius=0.06,y~radius=0.08] ; \end{tikzpicture}% } } } % \end{macrocode} %\end{macro} % % \begin{macro}{ \dSleepey } % It is sleeping. % \begin{macrocode} \@@_Declare_Document_Command:nnn { dSleepey } { S O{yellow} O{blue} O{black} } { \@@_provide_savebox_and_use:nT { dSleepey_#1_#2_#3_#4 } { \@@_set_scale_abs_tl:n {#1} \bool_if:NTF \g_@@_if_opt_draft_bool { \@@_create_draftbox:nn { 2.033865ex * \l_@@_scale_abs_tl } { 1.489181ex * \l_@@_scale_abs_tl } }{ \begin{tikzpicture} [ /@@ , x=2.04ex, y=2.04ex, line ~ width=0.102ex* \l_@@_scale_abs_tl , scale=#1 ] % %% Hat \shade [ball ~ color=#3] (-0.33,0) arc[start~angle=180,end~angle=0,x~radius=0.45,y~radius=0.4] -- ++(0,-0.2) arc[start~angle=0,end~angle=130,x~radius=0.15,y~radius=0.24]; % %% face \shade [ball ~ color=#2,rounded ~ corners=0.001ex * \l_@@_scale_abs_tl] (0.33,0) arc[start~angle=0, end~angle=-180, radius=0.33] -- cycle ; % %% Pommel \fill (0.55,-0.15) circle [radius=0.06]; \foreach \l_@@_angle_tl in {0,30,60,...,360} { \draw ({0.55+0.06*cos(\l_@@_angle_tl)*1.2}, {-0.15+0.06*sin(\l_@@_angle_tl)*1.2}) circle[radius=0.02]; } % %% Stars \foreach \l_tmpa_tl/\l_tmpb_tl in { -0.14/0.12 , 0.19/0.12 , 0.05/0.26 , 0.40/0.16 } { \draw [line~width=0.04ex* \l_@@_scale_abs_tl,#4] \foreach \l_@@_angle_tl in { 0,45,90,...,360 } { (\l_tmpa_tl,\l_tmpb_tl) -- ({\l_tmpa_tl+0.07*cos(\l_@@_angle_tl)}, {\l_tmpb_tl+0.07*sin(\l_@@_angle_tl)}) } ; } % %% Mouth \fill (0,-0.225) circle [radius=0.04]; % %% Eyes \draw (-0.1,-0.09) arc[start~angle=0, end~angle=-180, x~radius=0.06,y~radius=0.08] ; \draw (0.1,-0.09) arc[start~angle=180, end~angle=360,x~radius=0.06,y~radius=0.08] ; \end{tikzpicture}% } } } % \end{macrocode} %\end{macro} % % % % \begin{macro}{ \NiceReapey } % I wasn't able to create a good Grim Reaper. Well. % \begin{macrocode} \@@_Declare_Document_Command:nnn { NiceReapey } { S O{black!20!white} } { \@@_provide_savebox_and_use:nT { NiceReapey_#1_#2 } { \@@_set_scale_abs_tl:n {#1} \bool_if:NTF \g_@@_if_opt_draft_bool { \@@_create_draftbox:nn { (1.1067em+0.07ex) * \l_@@_scale_abs_tl } { (0.693em+0.07ex) * \l_@@_scale_abs_tl } }{ \begin{tikzpicture} [ /@@ , x=0.11em,y=0.11em, line ~ width=0.07ex* \l_@@_scale_abs_tl ,scale=#1 ] \draw[] (1.7,-1) arc [start ~ angle=360, end ~ angle=180, x ~ radius=1.7, y ~ radius=2] arc [start ~ angle=260, end ~ angle=110, x ~ radius=1.5,y ~ radius=2] .. controls (-1,3.3) and (1,3.3) .. (1.9,2.97) arc [start ~ angle=260, end ~ angle=100, x ~ radius=-1.3, y ~ radius=-2] -- cycle; \filldraw[fill=#2] (3,-3) -- (3,3) .. controls (5,3) and (6,2) .. (7,1.5) -- (3,1.5) -- cycle; \draw (0,-1.5) circle [ x~radius=1 , y~radius= 0.5]; \draw (0,-1.5) circle [ x~radius=1 , y~radius= 0.5]; \foreach \x in { 0.2 , 0.6 } \draw[line ~ width=0.04ex* \l_@@_scale_abs_tl ] (\x,-1) -- (\x,-2) (-\x,-1) -- (-\x,-2) ; \draw[line ~ width=0.04ex* \l_@@_scale_abs_tl ] (-1,-1.5) -- (1,-1.5); \fill (1.25,1.25) circle [ x~radius=0.5 , y~radius= 0.75]; \fill (-1.25,1.25) circle [ x~radius=0.5 , y~radius= 0.75]; \end{tikzpicture}% } } } % \end{macrocode} %\end{macro} % % % % \subsection{Other symbols(s)} % %\begin{macro}{ \@@_Strichmaxerl_x_check:N } % A helper command. % \begin{macrocode} \cs_new:Npn \@@_Strichmaxerl_x_check:N #1 { \fp_compare:nTF { #1 > 0 } { \fp_compare:nTF { #1 < 0.18 } { \fp_zero:N #1 } { \fp_set:Nn #1 { #1 - 0.18 } } } { \fp_compare:nTF { #1 > - 0.18 } { \fp_zero:N #1 } { \fp_set:Nn #1 { #1 + 0.18 } } } } % \end{macrocode} %\end{macro} % % % % % % %\begin{macro}{ \@@_Strichmaxerl_if_smaller_zero_set_zero:N } % Again to write less. % \begin{macrocode} \cs_new:Npn \@@_Strichmaxerl_if_smaller_zero_set_zero:N #1 { \fp_compare:nT { #1 < 0 } { \fp_zero:N #1 } } % \end{macrocode} %\end{macro} % % % % % % %\begin{macro}{ \Strichmaxerl } % \begin{macrocode} \@@_Declare_Document_Command:nnn { Strichmaxerl } { S O{-22} O{22} O{27} O{-27} } { \@@_provide_savebox_and_use:nT { Strichmaxerl_#1_#2_#3_#4_#5 } { \@@_set_scale_abs_tl:n {#1} \bool_if:NTF \g_@@_if_opt_draft_bool { % \end{macrocode} % % Now we have to calculate the length and the height of the separate % parts of the \verb|\Strichmaxerl|. % % At first the lengths (they have all an \verb|x| in the name). \par % \verb|LA| for \enquote{linker Arm} (\emph{left arm}). \par % \verb|RA| for \enquote{rechter Arm} (\emph{right arm}). \par % \verb|LB| for \enquote{linkes Bein} (\emph{left leg}). \par % \verb|RB| for \enquote{rechtes Bein} (\emph{right leg}). \par % \begin{macrocode} \fp_set:Nn \l_@@_Strichmaxerl_x_LA_fp { -0.27 * cosd (#2) } \fp_set:Nn \l_@@_Strichmaxerl_x_RA_fp { 0.27 * cosd (#3) } \fp_set:Nn \l_@@_Strichmaxerl_x_LB_fp { 0.34 * sind (#4) } \fp_set:Nn \l_@@_Strichmaxerl_x_RB_fp { 0.34 * sind (#5) } % \end{macrocode} % % Now the height (\verb|y|): \par % \verb|LA| for \enquote{linker Arm} (\emph{left arm}). \par % \verb|RA| for \enquote{rechter Arm} (\emph{right arm}). \par % \verb|LB| for \enquote{linkes Bein} (\emph{left leg}). \par % \verb|RB| for \enquote{rechtes Bein} (\emph{right leg}). \par % \begin{macrocode} \fp_set:Nn \l_@@_Strichmaxerl_y_LA_fp { 0.27 * sind (#2) } \fp_set:Nn \l_@@_Strichmaxerl_y_RA_fp { -0.27 * sind (#3) } \fp_set:Nn \l_@@_Strichmaxerl_y_LB_fp { 0.34 * cosd (#4) } \fp_set:Nn \l_@@_Strichmaxerl_y_RB_fp { 0.34 * cosd (#5) } % \end{macrocode} % Well then, lets start our calculations. Firstly the length. % %^^A X % % \begin{macrocode} \@@_Strichmaxerl_x_check:N \l_@@_Strichmaxerl_x_LA_fp \@@_Strichmaxerl_x_check:N \l_@@_Strichmaxerl_x_RA_fp \@@_Strichmaxerl_x_check:N \l_@@_Strichmaxerl_x_LB_fp \@@_Strichmaxerl_x_check:N \l_@@_Strichmaxerl_x_RB_fp % \end{macrocode} % % % % % % % \begin{macrocode} \fp_set:Nn \@@_Strichmaxerl_x_max_fp { max ( 0 , \l_@@_Strichmaxerl_x_LA_fp , \l_@@_Strichmaxerl_x_RA_fp, \l_@@_Strichmaxerl_x_LB_fp , \l_@@_Strichmaxerl_x_RB_fp ) } \fp_set:Nn \@@_Strichmaxerl_x_min_fp { min ( 0 , \l_@@_Strichmaxerl_x_LA_fp , \l_@@_Strichmaxerl_x_RA_fp, \l_@@_Strichmaxerl_x_LB_fp , \l_@@_Strichmaxerl_x_RB_fp ) } % \end{macrocode} % %^^A Y % % Finished the length. Now we calculate our height. Arms and legs more % or less separate. % % Arms: First we subtract $0.2$ (= adding $-0.2$) (torso length) % % \begin{macrocode} \fp_set:Nn \l_@@_Strichmaxerl_y_LA_fp { \l_@@_Strichmaxerl_y_LA_fp - 0.2 } \fp_set:Nn \l_@@_Strichmaxerl_y_RA_fp { \l_@@_Strichmaxerl_y_RA_fp - 0.2 } % \end{macrocode} % Arms and Legs: if they are smaller than $0$, make them $0$. % \begin{macrocode} \@@_Strichmaxerl_if_smaller_zero_set_zero:N \l_@@_Strichmaxerl_y_LA_fp \@@_Strichmaxerl_if_smaller_zero_set_zero:N \l_@@_Strichmaxerl_y_RA_fp \@@_Strichmaxerl_if_smaller_zero_set_zero:N \l_@@_Strichmaxerl_y_LB_fp \@@_Strichmaxerl_if_smaller_zero_set_zero:N \l_@@_Strichmaxerl_y_RB_fp % \end{macrocode} % % And find the greatest number. % \begin{macrocode} \fp_set:Nn \@@_Strichmaxerl_y_max { max ( 0 , \l_@@_Strichmaxerl_y_LA_fp , \l_@@_Strichmaxerl_y_RA_fp, \l_@@_Strichmaxerl_y_LB_fp , \l_@@_Strichmaxerl_y_RB_fp ) } % \end{macrocode} % % % % % % % \begin{macrocode} \@@_create_draftbox:nn { ( 0.606ex+1.35ex * \@@_Strichmaxerl_x_max_fp -1.35ex * \@@_Strichmaxerl_x_min_fp ) * \l_@@_scale_abs_tl }{ ( 1.173ex + 1.35ex * \@@_Strichmaxerl_y_max) * \l_@@_scale_abs_tl } }{ % { \begin{tikzpicture} [ /@@ , line ~ width=0.12ex* \l_@@_scale_abs_tl , scale=#1, x=1.35ex, y=1.35ex ] \char_set_catcode_other:N : \draw[rotate \space around= { #5 \token_to_str:N : ( 0.15 , 0.2 ) } ] (0.15,0.2) -- (0.15,-0.14); \draw[rotate \space around= { #4 \token_to_str:N : ( 0.15 , 0.2 ) } ] (0.15,0.2) -- (0.15,-0.14); \draw (.15,.2) -- (.15,.4); \draw[rotate \space around={ #3 \token_to_str:N : ( 0.15 , 0.4) } ] (0.15,0.4) -- (0.42,0.4); \draw[rotate \space around={ #2 \token_to_str:N : ( 0.15 , 0.4) } ] (0.15,0.4) -- (-0.12,0.4); \draw (.15, .4) -- (.15, .53); \draw (.15,.8) circle [radius=0.18]; \end{tikzpicture}% % } } } } % \end{macrocode} %\end{macro} % % % %\begin{macro}{ \Person } % \begin{macrocode} \@@_Declare_Document_Command:nnn { Person } { S O{-22} O{22} O{27} O{-27} } { \msg_error:nnnn { tikzsymbols } { obsolete-command } { \Person } { \Strichmaxerl } \tikzsymbolsuse { Strichmaxerl } [#1] [#2] [#3] [#4] [#5] } % \end{macrocode} %\end{macro} % % % % % % %\begin{macro}{ \Candle } % \begin{macrocode} \@@_Declare_Document_Command:nnn { Candle } { S } { \@@_provide_savebox_and_use:nT { Candle_#1 } { \@@_set_scale_abs_tl:n {#1} \bool_if:NTF \g_@@_if_opt_draft_bool { \@@_create_draftbox:nn { 0.64ex * \l_@@_scale_abs_tl } { (1.255ex+2.2pt) * \l_@@_scale_abs_tl } }{ \begin{tikzpicture} [ /@@ , x=1ex, y=1ex, scale=#1, line ~ width=0.07ex* \l_@@_scale_abs_tl ] \draw[rounded ~ corners=0.04ex* \l_@@_scale_abs_tl ] (0,0) -- (0.2,0) -- +(0,1) -- (0,1) -- cycle; \draw[line ~ width=0.05ex* \l_@@_scale_abs_tl ] (0.1,1) -- (0.1,1.2); \foreach \x in { -0.4 , 0.2 } \draw[xshift=0.95, yshift=2.2, line ~ width=0.04ex* \l_@@_scale_abs_tl ] (-0.1,0.6) .. controls (\x,0.8) and (-0.1,1) .. (-0.1,1.2); \end{tikzpicture}% } } } % \end{macrocode} %\end{macro} % % % % % % %\begin{macro}{ \Fire } % \begin{macrocode} \@@_Declare_Document_Command:nnn { Fire } { S } { \@@_provide_savebox_and_use:nT { Fire_#1 } { \@@_set_scale_abs_tl:n {#1} \bool_if:NTF \g_@@_if_opt_draft_bool { \@@_create_draftbox:nn { 1.576ex * \l_@@_scale_abs_tl } { 1.639ex * \l_@@_scale_abs_tl } }{ \begin{tikzpicture} [ /@@ , x=1ex, y=1ex, scale=#1, line ~ width=0.07ex* \l_@@_scale_abs_tl , rotate=45, ] \fill (-0.05,0) -- (0.05,0) -- (0.05,0.95) -- (-0.05,0.95) -- cycle; \fill (-0.74,0.7) -- (0.19,0.7) -- (0.19,0.8) -- (-0.74,0.8) -- cycle; \fill[rotate=-20, xshift=-1.3, yshift=-0.1] (-0.05,0.07) -- (0.05,0.07) -- (0.05,0.9) -- (-0.05,0.9) -- cycle; \fill[rotate=-70, xshift=-3.3, yshift=-2.3] (-0.05,0.07) -- (0.05,0.07) -- (0.05,0.9) -- (-0.05,0.9) -- cycle; \fill[rotate=135, xshift=2.5, yshift=-3.8] (-0.05,0.07) -- (0.05,0.07) -- (0.05,0.9) -- (-0.05,0.9) -- cycle; \draw [ rotate=-45, xshift=-2.6, yshift=1.5, line ~ width=0.04ex* \l_@@_scale_abs_tl , x=0.5ex, y=0.5ex ] (-0.1,0.29) .. controls (-0.7,0.6) and (0,1.2) .. (0.05,1.7); \draw [ rotate=-45, xshift=-2.1,yshift=1.5, line ~ width=0.04ex* \l_@@_scale_abs_tl , x=0.5ex, y=0.5ex ] (-0.1,0.29) .. controls (0.7,0.6) and (-0.1,1.2) .. (-0.15,1.7); \draw[rotate=-45, xshift=-2.5] (-0.1,0.29) .. controls (-0.7,0.6) and (0,1.2) .. (0,1.5); \draw[rotate=-45, xshift=-2] (-0.1,0.29) .. controls (0.7,0.6) and (-0.1,1.2) .. (-0.1,1.5); \end{tikzpicture}% } } } % \end{macrocode} %\end{macro} % % % % % % %\begin{macro}{ \Coffeecup } % \begin{macrocode} \bool_if:NF \g_@@_if_opt_marvosym_bool { \@@_Declare_Document_Command:nnn { Coffeecup } { S } { \@@_provide_savebox_and_use:nT { Coffeecup_#1 } { \@@_set_scale_abs_tl:n {#1} \bool_if:NTF \g_@@_if_opt_draft_bool { \@@_create_draftbox:nn { 1.82ex * \l_@@_scale_abs_tl } { 1.705ex * \l_@@_scale_abs_tl } }{ \begin{tikzpicture} [ /@@ , x=0.7ex,y=0.7ex, scale=#1, line ~ width=0.07ex* \l_@@_scale_abs_tl , decoration= { snake,amplitude=.05ex* \l_@@_scale_abs_tl , segment ~ length=0.408ex* \l_@@_scale_abs_tl } ] \draw (0,0) arc [start ~ angle=180, end ~ angle=270, x ~ radius=0.8,y ~ radius=1] --++ (0.5,0) arc [start ~ angle=270, end ~ angle=360, x ~ radius=0.8,y ~ radius=1] -- cycle; \draw (2.1,-0.15) -- (2.2,-0.15) arc [start ~ angle=90, end ~ angle=-90, radius=0.3] -- (1.85, -0.75); \foreach \x in {0.4,1,1.6} \draw[line ~ width=0.05ex* \l_@@_scale_abs_tl , decorate] (\x,0.3) -- +(0,1); \draw (0,-1.05) -- (2.1,-1.05); \end{tikzpicture}% } } } } % \end{macrocode} %\end{macro} % % % % % % %\begin{macro}{ \Chair } % \begin{macrocode} \@@_Declare_Document_Command:nnn { Chair } { S } { \@@_provide_savebox_and_use:nT { Chair_#1 } { \@@_set_scale_abs_tl:n {#1} \bool_if:NTF \g_@@_if_opt_draft_bool { \@@_create_draftbox:nn { 0.97ex * \l_@@_scale_abs_tl } { 1.69ex * \l_@@_scale_abs_tl } }{ \fp_compare:nT { #1 < 0 } { \bool_set_true:N \l_@@_if_scale_negative_bool } \begin{tikzpicture} [ /@@ , x=0.9ex,y=0.9ex, scale=#1, line ~ width=0.07ex* \l_@@_scale_abs_tl ] \draw (0,-0.5) -- (0,0.7) -- (0.5,1) -- (0.5,0.25); \draw[line ~ width=0.06ex* \l_@@_scale_abs_tl ] (0,0.4) -- (0.5,0.7); \draw (0,0) -- (0.5,0.3) -- (1,0) --(1,-0.5); \bool_if:NT \l_@@_if_scale_negative_bool { \draw (0.5,0.3) -- +(0,-0.5); } \draw (0.5,-0.3) -- (0.5,-0.8); \draw (1,0) -- (0.5,-0.3) -- (0,0); \end{tikzpicture}% } \bool_set_false:N \l_@@_if_scale_negative_bool } } % \end{macrocode} %\end{macro} % % % % % % %\begin{macro}{ \Bed } % \begin{macrocode} \@@_Declare_Document_Command:nnn { Bed } { S } { \@@_provide_savebox_and_use:nT { Bed_#1 } { \@@_set_scale_abs_tl:n {#1} \bool_if:NTF \g_@@_if_opt_draft_bool { \@@_create_draftbox:nn { 3.08ex * \l_@@_scale_abs_tl } { 1.68ex * \l_@@_scale_abs_tl } }{ \begin{tikzpicture} [ /@@ , x=1ex , y=1ex , scale=#1 , line ~ width=0.08ex*\l_@@_scale_abs_tl ] \draw (0,0) -- (0,1.6); \draw (3,0) -- (3,1.2); \draw (0,0.5) -- (3,0.5); \draw (0,0.35) -- (3,0.35); \draw (0.7,0.5) arc [start ~ angle=0, end ~ angle=90, radius=0.7]; \draw (0.7,0.5) arc [start ~ angle=180, end ~ angle=30, x ~ radius=1.231,y ~ radius=0.6]; \end{tikzpicture}% } } } % \end{macrocode} %\end{macro} % % % % % % %\begin{macro}{ \Tribar } % \begin{macrocode} \@@_Declare_Document_Command:nnn { Tribar } { S O{opacity=0} O{opacity=0} O{opacity=0} } { \@@_provide_savebox_and_use:nT { Tribar_#1_#2_#3_#4 } { \@@_set_scale_abs_tl:n {#1} \bool_if:NTF \g_@@_if_opt_draft_bool { \@@_create_draftbox:nn { 1.7175ex * \l_@@_scale_abs_tl } { 1.685ex * \l_@@_scale_abs_tl } }{ \begin{tikzpicture} [ /@@ , x=0.65ex,y=0.65ex,scale=#1, rounded ~ corners=0.03ex* \l_@@_scale_abs_tl , line ~ width=0.06ex* \l_@@_scale_abs_tl ] \fill[#2] (0.15,0.3) -- (-0.15,-0.3) -- (1.75,-0.3) -- ++ (-0.15,-0.3) -- (-0.65,-0.6) -- (0.35,1.3) -- +(0.15,-0.3); \fill[#3] (0,0) -- (1.3,0) -- (0.35,1.9) -- (0.65,1.9) -- (1.75,-0.3) -- (-0.1,-0.3); \fill[#4] (1,0) -- (0.35,1.3) -- (-0.65,-0.6) -- ++ (-0.15,0.3) -- (0.35,1.9) -- (1.3,0); \draw (0,0) -- (1,0) -- (0.5,1) -- cycle; \draw (0.15,0.3) -- (-0.15,-0.3) -- (1.75,-0.3) -- ++ (-0.15,-0.3) -- (-0.65,-0.6) -- (0.35,1.3) -- (0.8,.4); \draw (0.9,0) -- (1.3,0) -- (0.35,1.9) -- (0.65,1.9) -- (1.75,-0.3) -- +(-0.05,-0.1); \draw (-0.6,-0.6) -- (-0.65,-0.6) -- ++ (-0.15,0.3) -- (0.35,1.9) -- (0.4,1.9); \end{tikzpicture}% } } } % \end{macrocode} %\end{macro} % % % % % % %\begin{macro}{ \Moai } % \begin{macrocode} \@@_Declare_Document_Command:nnn { Moai } { S } { \@@_provide_savebox_and_use:nT { Moai_#1 } { \@@_set_scale_abs_tl:n {#1} \fp_compare:nTF { abs (#1) < 2 } { \dim_set:Nn \l_@@_Moai_thickness_dim { 0.05ex } }{ \fp_compare:nTF { abs (#1) < 5 } { \dim_set:Nn \l_@@_Moai_thickness_dim { 0.035ex } } { \dim_set:Nn \l_@@_Moai_thickness_dim { 0.03ex } } } \bool_if:NTF \g_@@_if_opt_draft_bool { \@@_create_draftbox:nn { ( 1.001ex + \l_@@_Moai_thickness_dim ) * \l_@@_scale_abs_tl } { ( 1.664ex + \l_@@_Moai_thickness_dim ) * \l_@@_scale_abs_tl } }{ \begin{tikzpicture} [ /@@ , x=.13ex, y=.13ex, rounded ~ corners=0.01ex* \l_@@_scale_abs_tl , scale=#1, line ~ width= \dim_use:N \l_@@_Moai_thickness_dim * \l_@@_scale_abs_tl ] \draw (-2.6,-4.25) -- (-2.5,-5.8) ..controls (-2,-6.8) and (1.5,-6.8) .. (2.2,-5.8) -- (2.4,-3.95); \draw (-2.5,2.5) .. controls (-2.9,4.6) and (2,5) .. (3.3,2.5) -- (2.9,-3.4) .. controls (2,-5) and (-4,-5) .. (-3.1,-3) -- cycle; \draw (-2.5,3) -- (-2,5) .. controls (0,6) and (2,5.8) .. (3.1,4.7) -- (3.3,2.5); \draw[line ~ width=0.02ex* \l_@@_scale_abs_tl ] (-2.2,-1.8) .. controls (-1,-1.3) and (0,-1.7) .. (1,-2); \draw[line ~ width=0.02ex* \l_@@_scale_abs_tl ] (-2.2,-1.8) .. controls (-1,-1) and (0,-1.4) .. (1,-2); \draw[line ~ width=0.02ex* \l_@@_scale_abs_tl ] (-2.2,-1.8) .. controls (-1,-2) and (0,-2) .. (1,-2); \draw (-0.8,4) .. controls (-0.8,3) and (-0.8,2) .. (-1.6,0.5) -- (-1.8,-0.4) .. controls (-1,0.2) and (0,0.2) .. (0.6,-0.4) -- (0.7,0.4) .. controls (0,1) and (0,2) .. (0.8,4); \draw (-1.8,-0.36) .. controls (-0.5,-0.5) and (0,-0.5) .. (0.6,-0.36); \draw (3.2,3.5) -- (3.7,3.5) .. controls (3.5,2) and (3.5,2) .. (3.6,-1.5) -- (3,-1.9); \draw (-2.5,3) .. controls (-2.7,2) and (-3,1) .. (-2.88,-1); \draw (-2.5,2.8) .. controls (-2,2.5) and (-1,3) .. (-0.8,3.1); \draw (0.5,3.3) .. controls (1,3) and (1,2.5) .. (3.3,2.4); \end{tikzpicture}% } } } % \end{macrocode} %\end{macro} % % % % % % % \begin{macro}{ \Snowman } % % \begin{macrocode} \@@_Declare_Document_Command:nnn { Snowman } { S } { \@@_provide_savebox_and_use:nT { Snowman_#1 } { \@@_set_scale_abs_tl:n {#1} \bool_if:NTF \g_@@_if_opt_draft_bool { \@@_create_draftbox:nn { 1.545ex * \l_@@_scale_abs_tl } { 1.772ex * \l_@@_scale_abs_tl } }{ \begin{tikzpicture} [ /@@ , x=0.9ex,y=0.9ex,line ~ width=0.07ex* \l_@@_scale_abs_tl , scale=#1 ] \draw (0,0) circle [x ~ radius = 0.4 , y~radius=0.35]; \draw[line ~ width=0.06ex* \l_@@_scale_abs_tl ] (0,0.64) circle [x ~ radius = 0.3 , y~radius=0.28]; \draw[line ~ width=0.05ex* \l_@@_scale_abs_tl ] (0,1.14) circle [x ~ radius = 0.2 , y~radius=0.2]; \draw [ rounded ~ corners=0.1ex* \l_@@_scale_abs_tl , line ~ width=0.05ex* \l_@@_scale_abs_tl , rotate ~ around={-30 \token_to_str:N : (0,1.14)} , ] (-0.2,1.15) -- ++(0,0.35) -- +(0.4,0) -- (0.2,1.14); \draw [ rounded ~ corners=0.07ex * \l_@@_scale_abs_tl , line ~ width=0.05ex * \l_@@_scale_abs_tl , rotate ~ around={-30 \token_to_str:N : (0,1.14)} , ] (-0.2,1.19) arc [start ~ angle=270, end ~ angle=90, radius=0.1]; \foreach \y in { 0.78 , 0.63 , 0.48 } \fill (0,\y) circle [radius=0.04]; \foreach \y in { 0.2 , 0 , -0.2 } \fill (0,\y) circle [radius=0.05]; \fill (-0.06,1.18) circle [radius=0.045]; \fill (0.06,1.18) circle [radius=0.045]; \foreach \x/\y in { 0.1/1.08 , 0.06/1.055 , 0.02/1.039} \fill (\x,\y) circle [radius=0.015] (-\x,\y) circle [radius=0.015] ; \draw (-0.3,0.7) -- (-0.6,0.8); \draw (0.3,0.7) -- (0.6,0.8); \draw[line ~ width=0.06ex* \l_@@_scale_abs_tl ] (-0.65,0) -- (-0.65,1); \foreach\x in {-0.85, -0.75,-0.65,-0.55,-0.45} \draw[line ~ width=0.05ex* \l_@@_scale_abs_tl ] (-0.65,1) -- (\x,1.3); \foreach \y/\x/\z in { 0.7/0.75 , 0.9/0.8 , 1/0.6/0.55 } \draw (0.6,0.8) -- (\x,\y) (-0.6,0.8) -- (-\z,\y) ; \end{tikzpicture}% } } } % \end{macrocode} %\end{macro} % % % % \subsection{Trees} % Many great ideas are stolen. Don't know who said that, but it's % true. % % % %\begin{macro}{ \@@_Basic_Tree:nnnnn } % Let's define the \Makro{@@_Basic_Tree:nnnnn} command. % Like every symbol it also is saved inside a box. % If the fifth argument is neither empty nor \enquote{leaf} % it \dots\ does (?) an error message. % \begin{macrocode} \cs_new:Npn \@@_Basic_Tree:nnnnn #1#2#3#4#5 { \@@_provide_savebox_and_use:nT { BasicTree_#1_#2_#3_#4_#5 } { \tl_set:Nn \l_tmpa_tl {#5} \bool_if:nTF { \tl_if_eq_p:NN \l_tmpa_tl \c_@@_leaf_tl || \tl_if_empty_p:n {#5} }{ \@@_Basic_Tree_aux:nnnnn {#1} {#2} {#3} {#4} {#5} }{ \msg_error:nnn { tikzsymbols } { tree } {#5} } } } % \end{macrocode} %\end{macro} % %\begin{macro}{ \BasicTree } % Well, thats the final \Makro{BasicTree} command. % More or less copy \& pasted from the \Package{tikz} manual. % \begin{macrocode} \@@_Declare_Document_Command:nnn { BasicTree } { S m m m m } { \@@_Basic_Tree:nnnnn {#1} {#2} {#3} {#4} {#5} } % \end{macrocode} %\end{macro} % % % % % % %\begin{macro}{ \WorstTree } % \begin{macrocode} \@@_Declare_Document_Command:nnn { WorstTree } { S } { \@@_provide_savebox_and_use:nT { WorstTree_#1 } { \@@_set_scale_abs_tl:n {#1} \bool_if:NTF \g_@@_if_opt_draft_bool { \@@_create_draftbox:nn { 1.64ex * \l_@@_scale_abs_tl } { 1.84ex * \l_@@_scale_abs_tl } }{ \begin{tikzpicture} [ /@@ , x=1ex,y=1ex, line ~ width=0.04ex* \l_@@_scale_abs_tl ,scale=#1 ] \fill[brown] (-0.3,0) .. controls (0.2,0.3) and (0.2,0.7) .. (0.2,1) -- (0.5,1) .. controls (0.5,0.7) and (0.5,0.3) .. (1,0); \draw (-0.3,0) .. controls (0.2,0.3) and (0.2,0.7) .. (0.2,1) -- (0.5,1) .. controls (0.5,0.7) and (0.5,0.3) .. (1,0) ; \fill[green] (0.2,0.8) -- (0,0.8) .. controls (-0.4,0.7) and (-0.4,1) .. (-0.3,1.2) .. controls (-0.3, 1.6) and (-0.1,1.6) .. (0.1,1.5) .. controls (0.3,1.8) and (0.6,1.6) .. (0.7,1.5) .. controls (1.1, 1.6) and (1,1.4) .. (1,1.2) .. controls (1.2,1) and (1.2,0.7) .. (0.8,0.8) -- (0.5,0.8); \draw (0.214,0.8) -- (0,0.8) .. controls (-0.4,0.7) and (-0.4,1) .. (-0.3,1.2) .. controls (-0.3, 1.6) and (-0.1,1.6) .. (0.1,1.5) .. controls (0.3,1.8) and (0.6,1.6) .. (0.7,1.5) .. controls (1.1, 1.6) and (1,1.4) .. (1,1.2) .. controls (1.2,1) and (1.2,0.7) .. (0.8,0.8) -- (0.486,0.8); \fill[red] (0,1) circle [radius=0.1]; \fill[red] (0.4,1.2) circle [radius=0.1]; \fill[red] (0.8,1.1) circle [radius=0.1]; \end{tikzpicture}% } } } % \end{macrocode} %\end{macro} % % % % % % % %\begin{macro}{ \Springtree } % \begin{macrocode} \@@_Declare_Document_Command:nnn { Springtree } { S } { \@@_Basic_Tree:nnnnn {#1} { brown!70!black } { green!90!black } { green!80!black } { leaf } } % \end{macrocode} %\end{macro} % % % % % % %\begin{macro}{ \Summertree } % \begin{macrocode} \@@_Declare_Document_Command:nnn { Summertree } { S } { \@@_Basic_Tree:nnnnn {#1} { brown!50!black } { green!80!black } { red!80!green } { leaf } } % \end{macrocode} %\end{macro} % % % % % % %\begin{macro}{ \Autumntree } % \begin{macrocode} \@@_Declare_Document_Command:nnn { Autumntree } { S } { \@@_Basic_Tree:nnnnn {#1} { red!30!black } { red!75!black } { orange } { leaf } } % \end{macrocode} %\end{macro} % % % % % % %\begin{macro}{ \Wintertree } % \begin{macrocode} \@@_Declare_Document_Command:nnn { Wintertree } { S } { \@@_Basic_Tree:nnnnn {#1} { black!80!white } { black!50 } { black!25 } { } } % \end{macrocode} %\end{macro} % % % % Checks if the Package \Package{marvosym} is loaded % if the \Option{marvosym} is set true. % \begin{macrocode} \AtBeginDocument { \bool_if:NT \g_@@_if_opt_marvosym_bool { \@ifpackageloaded { marvosym } { } { \msg_error:nn { tikzsymbols } { marvosym } } } } % \end{macrocode} % % % \begin{macro}{ \tikzsymbolsuse } % If the english command name is used, the german one % is inserted, don't exactly know why. % \begin{macrocode} \NewDocumentCommand \tikzsymbolsuse { m } { \prop_get:NnNTF \g_@@_english_commands_prop {#1} \l_tmpa_tl { \use:c { \g_@@_command_prefix_tl \l_tmpa_tl } }{ \cs_if_exist:cTF { \g_@@_command_prefix_tl #1 } { \use:c { \g_@@_command_prefix_tl #1 } } { \msg_error:nnn { tikzsymbols } { undefined-command } {#1} } } } % \end{macrocode} %\end{macro} % % % % %\begin{macro}{ \tikzsymbolsset } % \begin{macrocode} \NewDocumentCommand \tikzsymbolsset { m } { \keys_set_filter:nnnN { tikzsymbols } { package } {#1} \l_tmpa_tl \tl_if_empty:NF \l_tmpa_tl { \keyval_parse:NNV \@@_tikzsymbolsset_msg_i:n \@@_tikzsymbolsset_msg_ii:nn \l_tmpa_tl } } \cs_generate_variant:Nn \keyval_parse:NNn { NNV } \cs_new:Npn \@@_tikzsymbolsset_msg_i:n #1 { \@@_tikzsymbolsset_msg_ii:nn {#1} { } } \cs_new:Npn \@@_tikzsymbolsset_msg_ii:nn #1#2 { \msg_error:nnn { tikzsymbols } { package-option } {#1} } \exp_args:NV \tikzsymbolsset \l_@@_used_only_once_because_no_better_idea_tl % \end{macrocode} %\end{macro} % % %\iffalse %<*ignore> \tkzsymbls@Declare@Robust@Command{@@@@@@@@Keep@Cool@@@@I}{% \begin{tikzpicture}[ /@@ ,x=1em, y=1em, line ~ width=0.03em] \fill[decorate,decoration={snake,amplitude=.02em,segment ~ length=0.4em},cyan!20!] (0,0) -- (0,1) -- (1,1) -- (1,0) -- cycle; \draw (0.3,0.3) -- (0.55,0.7);% Körper \draw (0.05,0.4) -- (0.3,0.3) -- (0.1,0.1); \draw (0.3,0.8) -- (0.5,0.61); \draw (0.49,0.61) -- (0.8,0.65); \draw (0.65,0.9) circle [radius=0.17]; \end{tikzpicture}% \tikzsymbolsaftersymbolinput% } \tkzsymbls@Declare@Robust@Command{@@@@@@@@@@@Keep@Cool@@@@@II}{% \begin{tikzpicture}[ /@@ ,x=1em,y=1em] \fill[decorate,decoration={snake,amplitude=.02em,segment ~ length=0.6em},cyan!20!] (-0.3,-0.3) rectangle (0.5,1); \draw (0,-0.1) -- (0.15,0.2) -- (0.3,-0.1);% Beine \draw (.15,.2) -- (.15,.4);% Körper \draw (.15,.4) -- (.4,.5);% Rechter Arm \draw (.15,.4) -- (-0.1,.5);% Linker Arm \draw (.15, .4) -- (.15, .53);% Hals \draw (.15,.8) circle [radius=0.18];% Kopf \end{tikzpicture}% \tikzsymbolsaftersymbolinput% } % %\fi % % % % % \end{implementation} % % \iffalse meta-comment %: Final % % \endinput % Local Variables: % mode: doctex % TeX-master: t % End: % \fi