% \iffalse meta comment %<*internal> \begingroup \input docstrip.tex \keepsilent \preamble Copyright 2001--2011 Claudio Beccari All rights reserved. This system is distributed in the hope that it will be useful, but WITHOUT ANY WARRANTY; without even the implied warranty of MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. This file is distributed under the LPPL licence, version 1.3c dated 2008-05-04 or later as it appears in CTAN/macros/latex/base/lppl.tex. IMPORTANT NOTICE: You are not allowed to change this file. You are allowed to distribute this file under the condition that it is specified in the source file teubner.dtx. If you receive only some of these files from someone, complain! You are NOT ALLOWED to distribute this file alone. You are NOT ALLOWED to take money for the distribution or use of either this file or a changed version, except for a nominal charge for copying etc. \endpreamble \askforoverwritetrue \generateFile{teubner.sty}{t}{\from{teubner.dtx}{package}} \generateFile{LGRaccents-glyphs.def}{t}{\from{teubner.dtx}{defs}} \generateFile{teubnertx.sty}{t}{\from{teubner.dtx}{tbtx}} \def\tmpa{plain} \ifx\tmpa\fmtname\endgroup\expandafter\bye\fi \endgroup % % File: teubner.dtx Copyright (C) 2001-2011 Claudio Beccari % % It may be distributed and/or modified under the % conditions of the LaTeX Project Public License, either version 1.3 % of this license or (at your option) any later version. % The latest version of this license is in % http://www.latex-project.org/lppl.txt % % \fi % %% \CharacterTable %% {Upper-case \A\B\C\D\E\F\G\H\I\J\K\L\M\N\O\P\Q\R\S\T\U\V\W\X\Y\Z %% Lower-case \a\b\c\d\e\f\g\h\i\j\k\l\m\n\o\p\q\r\s\t\u\v\w\x\y\z %% Digits \0\1\2\3\4\5\6\7\8\9 %% Exclamation \! Double quote \" Hash (number) \# %% Dollar \$ Percent \% Ampersand \& %% Acute accent \' Left paren \( Right paren \) %% Asterisk \* Plus \+ Comma \, %% Minus \- Point \. Solidus \/ %% Colon \: Semicolon \; Less than \< %% Equals \= Greater than \> Question mark \? %% Commercial at \@ Left bracket \[ Backslash \\ %% Right bracket \] Circumflex \^ Underscore \_ %% Grave accent \` Left brace \{ Vertical bar \| %% Right brace \} Tilde \~} % \iffalse %<*dtx> \ProvidesFile{teubner.dtx}[2011/09/07 v.3.3 extensions for Greek philology] % %\NeedsTeXFormat{LaTeX2e} %\ProvidesPackage{teubner}[2011/09/07 v.3.3 extensions for Greek philology] % %<*driver> \documentclass{ltxdoc} \GetFileInfo{teubner.dtx} \title{The \textsf{teubner} package\\ Extensions for Greek philology% \thanks{This file has version number \fileversion, last revised on \filedate.}} \author{Claudio Beccari\\\texttt{claudio dot beccari at gmail dot com}} \date{} \providecommand\babel{\textsf{babel}} \newcommand\lbr{\char123\relax}\newcommand\rbr{\char125\relax} \newenvironment{sintassi}{% \begin{quote}\parskip0pt\hfuzz10pt\ttfamily\obeylines }{% \end{quote}\ignorespaces } \newcommand*\acro[1]{\expandafter\textsc\expandafter{\MakeLowercase{#1}}} \usepackage{multicol} \usepackage[T1]{fontenc} \usepackage{lmodern} \begin{document} \maketitle \DocInput{teubner.dtx} \end{document} % % \fi % % \CheckSum{5021} % \begin{multicols}{2}\tableofcontents\end{multicols} % % % \begin{abstract} % This extension package complements the greek option of the \babel\ % package so as to enable the use of the Lipsian\footnote{What here % are called Lipsian fonts are a family of fonts that in Greece are % called ``Lipsiakos''; they are similar to the ones that were being % used in the Teubner Printing Company of Lipsia from mid XIX century on.} % fonts and to use several macros for inserting special annotations % in the written text, as well as to typeset verses with special % layout. Metric sequences may be defined and typeset by means of a % companion font \texttt{gmtr????} that follows the same conventions % as the CB fonts that are normally used when the \babel\ greek % option is in force. % % Examples and lists of commands are available in the file % \texttt{teubner-doc.pdf} which, as a regular pdf file, embeds all % the necessary fonts and may be read on screen as well as printed on paper; % beware, though, that the PostScript fonts that are being used % in \texttt{teubner-doc.pdf} are not distributed with the package. % While this documentation is being written the \TeX{}-Live Team is trying % to reduce the size of the distribution and one of the proposals is to reduce % the number of Greek fonts distributed on \TeX-Live; therefore it might % be necessary that the users of this \textsf{teubner} package download the % missing fonts directly from one of the \acro{CTAN} archives. % \end{abstract} % % \section{Introduction} % Philologists in general have the necessity of using special % alphabets and several special symbols in order to mark up their % texts and to typeset them in a special way. Greek philology makes % no exception, therefore I prepared this file and some extra fonts % in order to complement what is already available with the greek % option of the \babel\ package. % % I must warmly thank Paolo Ciacchi of the University of Trieste who % invited me in this ``adventure'', since I know nothing about % philology; he assisted me with all his competence, so that I % could learn so many new things and I could appreciate the world of % philologists. % % Paolo Ciacchi's ``invitation'' arrived when I was almost finished % with the design of the Lipsian font family; I was working on this new % typeface after a kind request of Dimitri Filippou, with whom I % already collaborated for other questions related to Greek % typesetting. I warmly thank also Dimitri Filippou for the % patience with which he revised every single glyph of the new % typeface. Paolo Ciacchi added his constructive criticism to the % typeface, especially for what concerns diacritical marks. At the % end I think that the new typeface turned out pretty well thanks to % both my friends. % % The Lipsian font, also called Leipzig or Lipsiakos in Greece, is one of the % oblique fonts that used to be employed by the typesetters working in the % German city of Leipzig, among which the Teubner Printing Company. % This Company's classical works of ancient Greek poetry are considered among % the best ever published. The name of this file and this extension % package is in honor of that printing company. % % This package documentation does not contain any example written in % Greek, because when you process this file it is very likely that % you don't have the suitable Greek fonts and you must still download % all or some of them. Therefore a companion % file \texttt{teubner-doc.pdf} is included in this bundle where most, % if not all, the new commands are documented and suitably shown. % % This package contains new environments and new commands; it presumes % the user invokes it after declaring the \texttt{greek} option to the \babel\ % package; should he forget, this package will complain. But once the % \texttt{greek} option is properly declared, this package verifies that the % |polutonikogreek| dialect is selected, or that the |polutoniko| attribute % is set. This choice depends on the particular version of the \babel\ % package, but should not concern the user; switching back and forth % between classical Greek and some modern western language is performed % in a transparent way; possibly there might be some problem switching % from classical to modern spelling in Greek itself, but since in modern % spelling the multiplicity of Greek diacritical marks is not forbidden, % it's the author choice to select classical or modern words, Lipsian or % Didot fonts, polytonic or monotonic accentuation. The worst it can happen % is that \babel\ might use just one hyphenation pattern set, so that in % one of the two Greek versions some words might turn out with the wrong % hyphens. % % The CB Greek fonts, which have been available for some years now on % \acro{ctan} in the directory \texttt{/tex-archive/fonts/greek/cb} have % been completed with the new files for the Lipsian fonts, and the metric % symbols font \texttt{gmtr????.*}; % the latter does not need a formal font definition file, because % the necessary definitions are included in this package. % All fonts are available also as Type~1 scalable fonts. In general, recent % distributions of the \TeX\ system already contain the necessary % configuration to use the Type~1 font in one size, 10\,pt, but, thanks % scaling, these can be used at any size; this version of \textsf{teubner} % is compatible with this reduced set. If optical sizes are desired for % a more professional typesetting, the \acro{ctan} archives contain also % the \textsf{cbgreek-full} package, which includes also all the Type~1 % fonts at the various standard (EC) sizes, plus other facilities that allow % to use the CB fonts also in conjunction with the Latin Modern ones. % % The CB Greek fonts allow to input Greek text with a Latin keyboard and % by employing the prefix notation; with a Greek keyboard and file % \texttt{iso-8859-7.def} it is possible to directly input Greek text with the % monotonic spelling; if polytonic spelling is required I fear that the above % file is of little help and that a Latin keyboard does the job without % an excessive burden. % % Nevertheless there is a little point to observe; Lipsian fonts are very % nice but show most kerning errors with more evidence than the traditional % Didot Greek fonts. With the prefix notation in force, kerning programs may % result disabled and some diphthongs and some consonant-vowel combinations % appear poorly matched when the second letter caries any diacritical mark. In % order to avoid this ``feature'', the accented vowels may be input by means of % macros, that directly translate to the accented glyph, rather than invoking the % ligature programs that are implied by the prefix notation; reading a Greek text % on the screen while editing the input \texttt{.tex} file when a Latin % keyboard and such macros are used may be very strange, but authors get % used to it, and agree that the effort is worth the result. % % \section{Environments} % I apologize if I chose Italian names for verse environments; I wanted to % use names very different from the corresponding English ones, but at the % same time easily recognizable; after all \emph{versi} is the plural of % \emph{verso} and therefore is the exact Italian translation of \emph{verses}. % If you feel more comfortable with Latin the alias environment names % in Latin, |versus|, |Versus|, and |VERSUS|, are also available. % % \DescribeEnv{versi} %\DescribeMacro{\verso} % The environment \texttt{versi} (|versus|) is used to typeset verses % in line, without an implicit end of line at the end of each verse; a vertical bar % with a number on top of it marks the verse limit while allowing a numeric % reference to a specific verse; the opening environment statement requires % a string, a short text, in order to indent the verse lines the amount of % this string width; the syntax is the following % \begin{sintassi} % \bslash begin\lbr versi\rbr\lbr\meta{string}\rbr{} % \meta{verse}\bslash verso[\meta{starting number}]\meta{verse}\bslash verso % \meta{verse}\bslash verso\meta{verse}\dots{} % \bslash end\lbr versi\rbr % \end{sintassi} % where, of course, \meta{starting number} is required only for the first % instance of |\verso| or when numbering must be restarted, for example % after an ellipsis. % % \DescribeEnv{Versi} % The environment \texttt{Versi} (|Versus|) is similar to the % standard \LaTeX\ environment \texttt{verse}, except verse lines are numbered % on multiples of~5; the opening statement requires the \meta{starting % number} as an optional argument; if this optional argument is not specified, % the starting number is assumed to be~1. % \begin{sintassi} % \bslash begin\lbr Versi\rbr[\meta{starting number}] % \meta{verse}\bslash\bslash{}\meta{*}[\meta{vertical space}] % \meta{verse}\bslash\bslash{} % \dots{} % \bslash end\lbr Versi\rbr %\end{sintassi} % % \DescribeEnv{VERSI} % \DescribeMacro{\SubVerso} % \DescribeMacro{\NoSubVerso} % The environment \texttt{VERSI} (|VERSUS|) allows for two verse % enumerations; the main enumeration is identical to the one performed by % the previous environment \texttt{Versi}, while the secondary enumeration % is in smaller digits and normally numbers consecutive verses, except % that it can be turned on and off; the verses that lack the secondary % enumeration are indented by moving them to the right. % \begin{sintassi} % \bslash begin\lbr VERSI\rbr[\meta{starting principal number}] % \meta{verse}\bslash\bslash\meta{*}[\meta{vertical space}] % \bslash SubVerso[\meta{starting secondary number}] % \meta{verse}\bslash\bslash\meta{*}[\meta{vertical space}] % \dots{} % \bslash NoSubVerso % \meta{verse}\bslash\bslash\meta{*}[\meta{vertical space}] % \dots % \bslash end\lbr VERSI\rbr % \end{sintassi} % where if \meta{starting principal number} is missing, 1 is assumed, % while if \meta{starting secondary number} is missing, the enumeration % is continued from the next available integer. Of course % \meta{starting secondary number} is used again when the secondary % enumeration must be restarted; there are no means to restart the % principal enumeration. % % \DescribeEnv{bracedmetrics} The previous environments accept \meta{verses} % in any language and in any alphabet, the one that is in force before opening % the environment; the language and, even less, the alphabet cannot be % globally changed within the above environments; if such a change is performed, % it is valid only for one verse, or for the remaining fraction of the verse % after the language or font change. This means, among the other things, that % if the default ``alphabet'' is the one that shows the metric symbols, % the above environments may be used to display ``metric verses'', that is the % pattern of long, short or ancipital symbols, together with any other metric symbol % so as to display the metrics without disturbing the written text; when doing % this metric typesetting, it may happen that some verse patterns exhibit some % variants; in this case the \texttt{bracedmetrics} environment comes handy, because % it can display such variants in separate lines but grouped with a large right % brace; some commands allow to roughly align these variants, so as to % allow to nest several such environments as if they were single blocks of metric % symbols. The argument of the opening statement specifies the width of the % block so as to align properly all the symbols even in nested environments. % \begin{sintassi} % \bslash begin\lbr bracedmetrics\rbr\lbr\meta{length}\rbr{} % \meta{metric pattern}\bslash\bslash % \meta{metric pattern}\bslash\bslash % \dots{} % \bslash end\lbr bracedmetrics\rbr % \end{sintassi} % \DescribeMacro{\verseskip}\DescribeMacro{\Hfill} Within the \meta{metric pattern} % it is possible to flush right the symbols % by prefixing the whole string with a |\Hfill| command; the \meta{length} may % be specified as an integer multiple of a ``long'' symbol by means of %\begin{sintassi} % \bslash verseskip\lbr\meta{number}\rbr %\end{sintassi} % The macro |\verseskip| can be used also within \meta{metric pattern} % in order to space out metric symbols. % % \section{Commands and symbols} % This package defines a lot of commands for inserting special signs in the middle % of regular text, for marking zeugmas and synizeses, for putting unusual accents % on any symbol, for inserting special ``parentheses'' that are used by philologists % for marking blocks of letters or blocks of text. I suggest that the user consults % the documentation file \texttt{teubner-doc.pdf} for a complete list of commands % and symbols. % % \DescribeMacro{\newmetrics} Here it might be useful to describe a command % for defining metric sequences, so as to shorten the definition of metric verses; % this new command is |\newmetrics| and may be used for the definition of new % commands whose name \emph{may start with one digit}: precisely this digit may be % one of~2, 3,~4. Even if \LaTeX\ does not allow macros to contain both digits % and letters, other service macros have been defined so as to handle these % special control sequences even if they start with \emph{one} digit strictly lower % than~5. The syntax is: % \begin{sintassi} % \bslash newmetrics\lbr\meta{control sequence}\rbr\lbr\meta{definition}\rbr % \end{sintassi} % where \meta{definition} consists in general of a sequence of metric commands such % as |\longa|, |\brevis|, |\anceps|, etc. % % \section{Acknowledgements} % I must thank with gratitude Paolo Ciacchi that urged me to prepare this extension % file in order to help him typeset his master thesis of philological type in % classical Greek. % % I am pleased to thank G\"unter Milde who wrote a definition file for accessing % the LGR encoded fonts in order to fetch the accented glyphs; I kindly gave me % permission to use his macros, that I adapted to the conventions used within this % file. These macros are saved into the definition file |LGRaccent-glyph.def|, so % that it can be used also without the |teubner| package, fore example for % typesetting without setting the \emph{polytoniko} language attribute. % % I got some ideas also from a paper that Werner Lemberg published on Eutypon, the % magazine of the Hellenic Friends of \TeX, where he discussed in a constructive % critical way the problems connected with the LGR encoded fonts and the Unicode % encoding. % % \StopEventually{} % % \section{Code} % \subsection{Preliminaries} % The beginning of the file starts with the traditional stuff; % as usual we provide also the means for avoiding reading this file again. % \begin{macrocode} %<*package> \ifx\teubner\undefined \def\teubner{teubner}\else\expandafter\endinput \fi % \end{macrocode} % In order to use the PostScript pfb fonts (CM, EC, and CB) it is necessary to know % if we are dealing with \LaTeX\ or pdf\LaTeX; this was necessary because apparently % the pfb math scalable fonts derived from the \textsf{META\-FONT} counterparts do % not have exactly the same effective dimensions; this is why the ``zeugma'' and the % ``synizesis'' signs have to be corrected when the pfb fonts are used; with these, % in facts, the black leader that joins the curved extremities appeared a little too % fat and did not join exactly the left mark. Recently, apparently, the fonts have % been corrected and this trick is not necessary any more. Nevertheless we define % a new boolean that copes with the fact that sin 2007 the \TeX\ engine is % \textsf{pdftex} even when DVI output is sought: % \begin{macrocode} \newif\ifPDF \PDFfalse \@ifundefined{pdfoutput}{\PDFfalse}{\ifnum\pdfoutput>\z@\PDFtrue\fi} % \end{macrocode} % When \texttt{teubner.sty} is input the language Greek must have been already % defined; otherwise an error message is issued and processing is terminated. % \begin{macrocode} \ifx\captionsgreek\undefined \PackageError{teubner}{Greek language unknown!\MessageBreak I am not going to use Lipsian fonts and Scholars' signs\MessageBreak if Greek is unknown.\MessageBreak Use the babel package with the \texttt{greek} option.\MessageBreak Type X to exit.}% {Type X to exit.} \fi % \end{macrocode} % If this test is passed, this means that not only the greek option to the \babel\ % package is set, but also that all the \babel\ machinery is available. % % Since \texttt{teubner.sty} accepts some options it is necessary to provide % their definitions; in particular the |\or| control sequence conflicts % with the |\or| primitive command used within the syntax of |\ifcase|\footnote{With % version 2002/07/18 v.1.0d this has been eliminated; the option remains for % compatibility with older versions, but the only legal command is now % \texttt{\string\oR}.}; |\oR| is a little exception since all the other % accent-vowel macros contain only lowercase letters. The point is that accent vowel % sequences that directly access the accented glyph are made up as such: % \begin{sintassi} % \bslash \meta{base character}\meta{first diacritic}\meta{second diacritic}% % \meta{third diacritic} % \textrm{where} % \meta{first diacritic} \textrm{is \texttt{d} or \texttt{r} or \texttt{s} for % diaeresis, rough or smooth breadth} % \meta{second diacritic} \textrm{is \texttt{c} or \texttt{a} or \texttt{g} for % circumflex or acute or grave} % \meta{third diacritic} \textrm{is \texttt{i} for iota subscript or adscript} % \end{sintassi} % Evidently none of the diacritical marks is compulsory, but at least one must % be present; if more than one is present it must be given in that sequence. Since % |\oR| means omicron with rough breath, it is not very important that it is % declared with the standard sequence | gmtr1000}{}% \else \DeclareFontShape{U}{mtr}{m}{n}{% <-5.5> gmtr0500 <5.5-6.5> gmtr0600 <6.5-7.5> gmtr0700 <7.5-8.5> gmtr0800 <8.5-9.5> gmtr0900 <9.5-11> gmtr1000 <11-15> gmtr1200 <15-> gmtr1728}{}% \fi \DeclareFontShape{U}{mtr}{m}{it}{<->ssub*mtr/m/n}{}% \DeclareFontShape{U}{mtr}{b}{it}{<->ssub*mtr/m/n}{}% \DeclareFontShape{U}{mtr}{b}{n}{<->ssub*mtr/m/n}{}% \newcommand*\metricsfont{\fontencoding{U}\fontfamily{mtr}\upshape} % \end{macrocode} % \end{macro} % Next we require the package for extensible math fonts; it might be strange to use % extensible math fonts in Greek philology, but a certain command must be picked up % from such fonts, with the assurance that it changes size together with the % current font size. % \begin{macrocode} \RequirePackage{exscale} % \end{macrocode} % % Some macros are necessary to switch languages; such macros must be independent % (at least for now) from the particular \babel\ version, whether it be version % 3.6, 3.7, or~3.8; in the former the concept of ``language attribute'' is unknown, % while the latter recognizes varieties of the same language by the attribute % setting. Such macros, besides being as robust as possible, must provide the % alphabet changes as required. % %\begin{macro}{\GreekName} % During the language switching operations |\GreekName| % distinguishes the dialect or the main language whose attribute % gets set and, evidently, becomes effective when the main language \texttt{greek} % is in force. % \begin{macrocode} \ifx\languageattribute\undefined \def\GreekName{polutonikogreek}% \else \languageattribute{greek}{polutoniko}\def\GreekName{greek}% \fi % \end{macrocode} %\end{macro} % % \subsection{Compatibility with Latin fonts}\label{ssec:LatinFontComp} %\begin{macro}{\previouslanguage} %\begin{macro}{\previousencoding} % The ``default'' language is defined as the % ``previous'' language; similarly the ``default'' encoding is defined as the % ``previous'' encoding; these are the language and the encoding in force when the % document starts; this is why such macros are defined at the beginning of the % document. At the same time we assure that if the CM (or EC) or the LM fonts are % the default ones, nothing special is done, while if the default fonts are, say, % the TX ones, they are correctly restored, but the CM families are used for the CB % ones. %\end{macro} %\end{macro} % %\begin{macro}{\substitutefontfamily} %\begin{macro}{\ifLipsian} % The font macro |\substitutefontfamily| is already present in the \babel\ kernel; % it copes only with the standard families, series and shapes, therefore it does not % consider the Lipsian shape and its series. I had to redefine it together with a % new conditional macro in order to do the same job as the original one but taking % into consideration also the Lipsian shape; the purpose of this macro is to write % in the working directory a number of font description files that refer to the LGR % Greek encoding, but have the names of the Latin font families; such font % description files, simply substitute these non existent encoding-family series and % shapes with the existing series and shapes of any other LGR encoded Greek font, in % particular the CB ones. By issuing a command such as: % \begin{sintassi}\ttfamily % \texttt{\string\ifFamily}\{pxr\}\{cmr\} % \end{sintassi} % an association is made with all the series and shapes of the Palatino serifed % fonts to the corresponding CB serifed series and shapes; therefore when a language % shift changes the default encoding from, say, \texttt{T1} to \texttt{LGR} the % font family \texttt{LGR+pxr} is mapped to the font family \texttt{LGR+cmr} and % everything is supposed to work fine; when another language change resets the % encoding to \texttt{T1}, the original Latin script is used again. The redefined % |\substitutefontfamily| macro is as such: % \begin{macrocode} \newif\ifLipsian \providecommand*\substitutefontfamily{}% \renewcommand*\substitutefontfamily[3]{{% \edef\@tempA{#1#2.fd}% \lowercase\expandafter{\expandafter\def\expandafter\@tempA\expandafter{\@tempA}}% \expandafter\IfFileExists\expandafter{\@tempA}{}{% \immediate\openout15=\@tempA \typeout{Writing file #1#2.fd} \immediate\write15{% \string\ProvidesFile{#1#2.fd}^^J [\the\year/\two@digits{\the\month}/\two@digits{\the\day} \space generated font description file]^^J \string\DeclareFontFamily{#1}{#2}{}^^J \string\DeclareFontShape{#1}{#2}{m}{n}{<->ssub * #3/m/n}{}^^J \string\DeclareFontShape{#1}{#2}{m}{it}{<->ssub * #3/m/it}{}^^J \string\DeclareFontShape{#1}{#2}{m}{sl}{<->ssub * #3/m/sl}{}^^J \string\DeclareFontShape{#1}{#2}{m}{sc}{<->ssub * #3/m/sc}{}^^J \string\DeclareFontShape{#1}{#2}{b}{n}{<->ssub * #3/bx/n}{}^^J \string\DeclareFontShape{#1}{#2}{b}{it}{<->ssub * #3/bx/it}{}^^J \string\DeclareFontShape{#1}{#2}{b}{sl}{<->ssub * #3/bx/sl}{}^^J \string\DeclareFontShape{#1}{#2}{b}{sc}{<->ssub * #3/bx/sc}{}^^J \string\DeclareFontShape{#1}{#2}{bx}{n}{<->ssub * #3/bx/n}{}^^J \string\DeclareFontShape{#1}{#2}{bx}{it}{<->ssub * #3/bx/it}{}^^J \string\DeclareFontShape{#1}{#2}{bx}{sl}{<->ssub * #3/bx/sl}{}^^J \string\DeclareFontShape{#1}{#2}{bx}{sc}{<->ssub * #3/bx/sc}{}^^J }% \ifLipsian \immediate\write15{% \string\DeclareFontShape{#1}{#2}{m}{li}{<->ssub * #3/m/li}{}^^J %<- Lipsian \string\DeclareFontShape{#1}{#2}{b}{li}{<->ssub * #3/b/li}{}^^J %<- Lipsian \string\DeclareFontShape{#1}{#2}{bx}{li}{<->ssub * #3/bx/li}{}^^J %<-Lipsian \string\DeclareFontShape{#1}{#2}{m}{ui}{<->ssub * #3/m/ui}{}^^J %<- upright Olga \string\DeclareFontShape{#1}{#2}{b}{ui}{<->ssub * #3/m/ui}{}^^J %<- upright Olga \string\DeclareFontShape{#1}{#2}{bx}{ui}{<->ssub * #3/bx/ui}{}^^J%<-upright Olga \string\DeclareFontShape{#1}{#2}{m}{rs}{<->ssub * #3/m/rs}{}^^J %<-serifed lc \string\DeclareFontShape{#1}{#2}{b}{rs}{<->ssub * #3/m/rs}{}^^J %<-serifed lc \string\DeclareFontShape{#1}{#2}{bx}{rs}{<->ssub * #3/bx/rs}{}^^J%<-serifed lc }% \Lipsianfalse\fi \closeout15}% }} % \end{macrocode} % Notice that together with the Lipsian fonts the upright italics (Olga) and upright % serifed lowercase alphabets are defined. In a while there are the definition for % selecting these shapes. Of course you are not obliged to use them, but in case you % wanted\dots % % These results are obtained by means of the following macros. %\begin{macro}{\ifCMLM} %\begin{macro}{\ifFamily} % The |\ifCMLM| processes the necessary test in order to set the auxiliary macro % |\n@xt| to be an alias to |\iftrue| or |iffalse| depending on the fact that the % CM (or EC) fonts or the LM fonts are the default Latin ones, in this case it sets % the |\n@xt| macro equivalent to |\iftrue|, otherwise it sets it to |\iffalse|. In % order to succeed, it requires to analyze the first two letters of the default % family name; if these letters form one of the sequences |cm| or |lm|, the CM or % LM fonts have been loaded, otherwise some other fonts are in force. We need % therefore a macro with delimited arguments in order to extract the first two % letters of the family name. % % \begin{macrocode} \def\ifCMLM#1#2#3!{\edef\f@milyprefix{#1#2}% \ifthenelse{\(\equal{\f@milyprefix}{cm}\OR\equal{\f@milyprefix}{lm}\)}% {\let\n@xt\iftrue}{\def\f@milyprefix{cmr}\let\n@xt\iffalse}\n@xt} % \end{macrocode} % The other macro |\ifFamily| uses the previous macro and according to the test % result, possibly runs the |\substitutefontfamily| macro that, if % necessary, creates the description file that map the specified family font % description file to the second specified font family, both connected to the LGR % encoding. Therefore, after these font definition files exist, \LaTeX\ can fetch % the Greek fonts by way of substitution. Let's explain again: if you specify % \begin{verbatim} % \Lipsiantrue\ifFamily{pxr}{lmr} % \end{verbatim} % you state that you want to run the macro on the serifed Palatino font family, by % associating the |pxr| family to the |lmr| one\footnote{If you have the full CB % Greek font collection it's more convenient to map the missing fonts to the Latin % Modern Greek ones, while if you need to use the \emph{10pt} option, you'd better % map the missing family to the ordinary Computer Modern ones; the actual fonts are % the same, but the latter font definition files cope with the \emph{10pt} option, % while the former don't.}; by specifying |\Lipsiantrue| you state that you want to % create entries also for the Lipsian series and shape; The macro provides to reset % |\Lipsianfalse| in order to avoid that other calls of that macro on non serifed % or monospaced fonts try to create entries that in any case do not exist: the % Lipsian font comes only as a serifed font! In this way, if you are using % Palatino fonts through the \textsf{pxfonts} package, the |teubner| macros provide % to create the necessary font description files so that while you are typesetting % in medium normal Latin Palatino and you switch to Greek, the built in macros % change the encoding to LGR; the LGR Palatino serifed medium normal Greek font % does not exist, but that family, series and shape are mapped by the font % description file to the corresponding LGR encoded Latin Modern CB fonts in medium % series and normal shape, and typesetting goes on with the right Greek fonts. % \begin{macrocode} \newcommand*\ifFamily[2]{% \expandafter\ifCMLM#1!\else\substitutefontfamily{LGR}{#1}{#2}\fi} % \end{macrocode} % You don't actually need to use that macro for the Times or the Palatino eXtended % fonts loaded by means of the corresponding packages \textsf{txfonts} or % \textsf{pxfonts}, because a hook is set up so that ``at begin document'' the % loading of those packages is tested, and if the test is true, the necessary font % description files are possibly created. If you load the Times or the Palatino or % any other non standard font by means of other packages, it's up to you to issue % the |\substitutefontfamily| macro right after calling that font package and by % using the correct family names; similarly you might substitute the new Latin font % family names to other Greek font family names, if you have other fonts available. % At the same time at begin document we memorize the name and encoding of the Latin % font used for the default language, so that when returning to Latin font % typesetting after Greek font typesetting, the proper language typesetting rules % and encoding are restored. % \begin{macrocode} \AtBeginDocument{% \@ifpackageloaded{pxfonts}{\typeout{Palatino fonts loaded}% \Lipsiantrue\ifFamily{pxr}{cmr}\Lipsianfalse \ifFamily{pxss}{cmss}\ifFamily{pxtt}{cmtt}}{\relax}} \AtBeginDocument{% \@ifpackageloaded{txfonts}{\typeout{Times fonts loaded}% \RequirePackage{teubnertx}}{}} \AtBeginDocument{% \edef\previouslanguage{\languagename}% \edef\previousencoding{\f@encoding}} % \end{macrocode} % Nevertheless all this requires a minimum of attention in specifying the options % for the \babel\ package and in the order extensions packages are read in. The % |teubner.sty| package should be read \emph{after} any other package that sets or % resets the Latin font encoding; for example if the T1 encoding is selected as the % default one, in place of the OT1 encoding, then % this choice must be made before this package is read in. Similarly when the % \babel\ options are specified, remember that the last language name becomes the % default language at begin document; never specify \texttt{greek} as the last % language option! %\end{macro} %\end{macro} %\end{macro} %\end{macro} % %\begin{macro}{\Lipsiakostext} %\begin{macro}{\lishape} %\begin{macro}{\textli} % |\lishape| is the normal declaration, modeled on the other similar macros in the % \LaTeX\ kernel, made up to chose the Lipsian shape. Nevertheless since it is a % light character, if it must blend well with the other PostScript fonts, not only % the CM and LM, but also the other ones available for typesetting with the \TeX\ % system, it is necessary to chose the |b| (bold) series in place of the |m| % (medium) one, while maintaining the |bx| (bold extended) series when the other % fonts are set with the blacker and larger series. This is why the |\lishape| % declaration is a little more complicate than normal, since it has to test the % value of the current series. The text command |\textli| matches the similar % commands for Latin fonts. But the |\lishape| declaration is used also within the % more complicated macros for declaring or setting the Lipsian font. % % |\Lipsiakostext| is a \emph{declaration} stating that from now on % typesetting will be done with the Lipsian fonts; notice that the encoding and the % language name in force before this declaration are memorized, then the current % Greek version is selected; the |\let\~\GRcirc| is required because swithching % on and off may reset the active tilde and connected macros definitions. % |\~| in Greek must set the circumflex accent, so we make sure that this really % occurs. % \begin{macrocode} \DeclareRobustCommand{\lishape}{% \not@math@alphabet\lishape\relax \ifthenelse{\equal{\f@encoding}{\GRencoding@name}}{% \ifboldLipsian \ifthenelse{\equal{\f@series}{m}}% {\fontseries{b}\fontshape{li}\rmfamily}% {\fontshape{li}\rmfamily}\else \fontshape{li}\rmfamily\fi}% {\fontshape{it}\selectfont}}% \DeclareTextFontCommand{\textli}{\lishape}% \DeclareRobustCommand\Lipsiakostext{% \expandafter\select@language\expandafter{\GreekName}% \let\~\GRcirc\let~\greek@tilde\lishape} % \end{macrocode} %\end{macro} %\end{macro} %\end{macro} %\begin{macro}{\textLipsias} % |\textLipsias| is a command that typesets its argument with the |\Lipsiakostext| % declaration in force. The \LaTeX\ command declaration used here makes sure that % possible italic corrections are taken into account; hte actual font switching is % made through the same |\Lipsiakostext| declaration, but the inner working % maintain local this declaration, so non grouping is explicitly required; for this % reason we suggest to use this text command rather than the font declaration. % \begin{macrocode} \DeclareTextFontCommand{\textLipsias}{\Lipsiakostext} % \end{macrocode} %\end{macro} %\begin{macro}{\NoLipsiakostext} |\NoLipsiakostext| is the opposite declaration % that undoes everything that was done with |\Lipsiakostext|. Probably it is % superfluous, but it has been asked for. If |\Lipsiakostext| is delimited within a % scope by means of an explicit group or an environment, it stops its effectiveness % with the end of its scope. % % It is worth noting that, in order to delimit within a scope the action of this and % of the other declarations, it is possible to use them as environments with the % same name without the backslash. for example one might input in the source file % something as: %\begin{quote}\obeylines % |\begin{Lipsiakostext}| % \meta{Greek text to be typeset with the Lipsian font} % |\end{Lipsiakostext}| %\end{quote} % Remember also that these Greek text declarations may be issued while typesetting % with Latin fonts; they provide also the language switch, so that they do not % require the typesetter to first switch to Greek and then to choose a certain Greek % font. % \begin{macrocode} \DeclareRobustCommand\NoLipsiakostext{% \ifthenelse{\equal{\f@series}{b}}{\fontseries{m}}{\relax}% \fontshape{n}\selectfont \expandafter\select@language\expandafter{\previouslanguage}% \rmfamily\bbl@activate{~}} % \end{macrocode} %\end{macro} %\begin{macro}{\textDidot} % |\textDidot| is a similar macro where the common upright Greek characters are % selected; it goes by itself that if |\textit| is specified within the % |\textDidot| argument, the typesetting is or becomes identical with what % one can obtain with the |\textLipsias| command. % \begin{macrocode} \DeclareRobustCommand\textDidot[1]{{% \expandafter\select@language\expandafter{\GreekName}% \let\~\GRcirc\let~\greek@tilde \fontencoding{LGR}\rmfamily#1}} % \end{macrocode} %\end{macro} % %\begin{macro}{\textlatin} % |\textlatin| is a redefinition of the standard \babel\ macro that is adapted to % the present situation, where it may be called behind the scenes in certain % situations that are beyond the control of the typesetter. Therefore % every precaution is taken in order to be sure that the composition of the command % argument is really done with the default encoding and font families, but % maintaining the current series and shape; of course, if the shape is that related % to the Lipsian font, then the italic shape is temporarily restored (local % definition). Moreover, with the (default) Latin fonts the tilde is restored to a % non breaking space by simly making it an active character. % \begin{macrocode} \DeclareRobustCommand\textlatin[1]{\edef\externalencoding{\f@encoding}{% \def\itdefault{it}\def\@tempA{li}\ifx\@tempA\f@shape\def\f@shape{it}\fi% \expandafter\select@language\expandafter{\previouslanguage}% \fontencoding{\previousencoding}% \fontfamily{\rmdefault}\selectfont \bbl@activate{~}#1}% \expandafter\fontencoding\expandafter{\externalencoding}\rmfamily} % \end{macrocode} %\end{macro} % %\begin{macro}{\uishape} %\begin{macro}{\textui} %\begin{macro}{\rsshape} %\begin{macro}{\textrs} % The other switching font macros for using the other shapes that are available % with the CB fonts are working only when typesetting in Greek and the default % encoding is therefore LGR. % \begin{macrocode} \DeclareRobustCommand\uishape{% \ifthenelse{\equal{\f@encoding}{\GRencoding@name}}% {\fontshape{ui}\selectfont}{\relax}} \DeclareTextFontCommand{\textui}{\uishape} \DeclareRobustCommand\rsshape{% \ifthenelse{\equal{\f@encoding}{\GRencoding@name}}% {\fontshape{rs}\selectfont}{\relax}} \DeclareTextFontCommand{\textrs}{\rsshape} % \end{macrocode} %\end{macro} %\end{macro} %\end{macro} %\end{macro} % % \subsection{Service macros} % Now we start the specific additions introduced with this package. % % \begin{macro}{\strip@pt} % The \LaTeX\ kernel has the macro |\strip@pt| that strips off the pt part from the % expanded value of a dimension register name and makes available the measure in pt % of the contained length (the register contains the length measure in scaled % points; the expansion performed by \TeX\ with the command |\the| converts the % scaled points to printer points and shows the result with a string of decimal % digits with, possibly, a decimal fraction); its argument is supposed % to be a dimension register name, not its expanded contents. The |\strip@pt| % command eliminates the decimal point and the fractional part if the latter is % nought. % With the help of such service macro we are going to define a certain number of % ``lift accent'' macros or ``put cedilla'' macros that work with both upright and % slanted fonts, although they contain different parameters for Latin compared to % Greek alphabets. % \end{macro} % % \begin{macro}{\lift@accent} % The first ``lift accent'' macro just puts an accent over % a letter, without inserting any space between them; the first argument is the % accent code (decimal, hexadecimal or octal; I prefer decimal), while the second % argument is the letter --~any letter, even if it is not a vowel! % \begin{macrocode} \newcommand*\lift@accent[2]{\leavevmode {\edef\slant@{\strip@pt\fontdimen1\font}% \dimen@=\z@\setbox\z@\hbox{\char#1}\advance\dimen@-.5\wd\z@ \setbox\tw@\hbox{i}\setbox\z@\hbox{#2}% \ifdim\wd\z@>\wd\tw@\advance\dimen@ .5\wd\z@ \else\advance\dimen@ .3\wd\z@\fi \ifx#2a\advance\dimen@-.1\wd\z@\fi \ifx#2h\advance\dimen@.05\wd\z@\fi \@tempdima\ht\z@\advance\@tempdima-1ex\relax \advance\dimen@\slant@\@tempdima \raise\@tempdima\hbox to\z@{\kern\dimen@\char#1\relax\hss}\box\z@}} % \end{macrocode} % \end{macro} % % \begin{macro}{\Lift@accent} % The second ``lift accent'' macro behaves as the first one except it interposes a % small vertical distance between the accent and the letter: % \begin{macrocode} \newcommand*\Lift@accent[2]{\leavevmode {\edef\slant@{\strip@pt\fontdimen1\font}% \dimen@=\z@\setbox\z@\hbox{\char#1}\advance\dimen@-.5\wd\z@ \setbox\tw@\hbox{i}\setbox\z@\hbox{#2}% \ifdim\wd\z@>\wd\tw@\advance\dimen@ .5\wd\z@ \else\advance\dimen@ .3\wd\z@\fi \ifx#2a\advance\dimen@-.1\wd\z@\fi \ifx#2h\advance\dimen@.05\wd\z@\fi \@tempdima\ht\z@\advance\@tempdima-1ex\advance\@tempdima.1ex\relax \advance\dimen@\slant@\@tempdima \raise\@tempdima\hbox to\z@{\kern\dimen@\char#1\relax\hss}\box\z@}} % \end{macrocode} % \end{macro} % % \begin{macro}{\LIFT@accent} % The third ``lift accent'' macro behaves as the first one, except it interposes a % specified vertical space between the letter and the accent; this space is % specified as the second argument: % \begin{macrocode} \newcommand*\LIFT@accent[3]{\leavevmode {\edef\slant@{\strip@pt\fontdimen1\font}% \dimen@=\z@\setbox\z@\hbox{\char#1}\advance\dimen@-.5\wd\z@ \setbox\tw@\hbox{i}\setbox\z@\hbox{#3}% \ifdim\wd\z@>\wd\tw@\advance\dimen@ .5\wd\z@ \else\advance\dimen@ .3\wd\z@\fi \ifx#2a\advance\dimen@-.1\wd\z@\fi \ifx#2h\advance\dimen@.05\wd\z@\fi \@tempdima\ht\z@\advance\@tempdima-1ex\relax \def\@tempA{#2}\ifx\@tempA\undefined\else \advance\@tempdima#2\fi\let\@tempA\undefined \advance\dimen@\slant@\@tempdima \raise\@tempdima\hbox to\z@{\kern\dimen@\char#1\relax\hss}\box\z@}} % \end{macrocode} % \end{macro} % % All these macros will be used in subsequent ``put accent'' macros, that will % stack also several accents one above the other; the necessity arises for example % when the macron or breve diacritical marks have to be put over accented letters; % according to typographical practice the accents must go over the macron or the % breve. % In a similar way philologists often must use other diacritical marks in addition % to the traditional Greek ones, therefore these macros will be used, for example, % for setting the Scandinavian ring (from a Latin font) over a Greek letter (from a % Greek font). % % \begin{macro}{\cap@} % The first such unusual diacritical mark is a small cap, a small upside down breve % sign, that is in position~1 of the Greek font table. % \begin{macrocode} \DeclareRobustCommand{\cap@}[1]{\leavevmode {\edef\slant@{\strip@pt\fontdimen1\font}% \setbox\tw@\hbox{\fontencoding{\GRencoding@name}\selectfont \char1}\dimen@-.5\wd\tw@ \setbox\z@\hbox{#1}% \advance\dimen@ .5\wd\z@ \@tempdima\ht\z@\advance\@tempdima.55ex\relax \advance\dimen@\slant@\@tempdima \ifx\cf@encoding\GRencoding@name\else \ifx#1k\advance\dimen@-.3\wd\tw@\fi\fi \raise\@tempdima\hbox to\z@{\kern\dimen@\box\tw@\relax\hss}\box\z@}} % \end{macrocode} % The |\ifx\cf@encoding\GRencoding@name| conditional construct shows that this % macro behaves differently with different font encodings; the following |\ifx#1k| % checks the argument against the Greek letter kappa, which shows very clearly % that these macros operate on any letter, not only on vowels. % \end{macro} % % \begin{macro}{\cap} % By means of the above |\cap@| macro we can define three equivalent commands to be % used either when the Greek encoding is in force, or when one of the Latin % encodings is in force: % \begin{macrocode} \DeclareTextCommand{\cap}{\GRencoding@name}{\cap@} \DeclareTextCommand{\cap}{OT1}{\cap@} \DeclareTextCommand{\cap}{T1}{\cap@} % \end{macrocode} % Probably one definition would be sufficient, but on one side the presence of three % encoding dependent macros are the remains of initial works, while on the other % side they prevent to use these macros with encodings for which the macro might not % work well, because it was not tested with them. % \end{macro} % % \begin{macro}{\cap@cedilla} % Similarly a small cap can be put under another letter as it was a cedilla; for % this task another macro is defined, which makes use of the same glyph in % position~1 in the Greek font table: % \begin{macrocode} \newcommand*\cap@cedilla[1]{\leavevmode {\setbox4\hbox{\fontencoding{\GRencoding@name}\selectfont\char1}% \dimen@-.5\wd4 \setbox\z@\hbox{#1}% \ifx\cf@encoding\GRencoding@name \ifx#1i\advance\dimen@ .65\wd\z@\else\advance\dimen@ .5\wd\z@\fi \else \ifx#1i\advance\dimen@ .55\wd\z@\else\advance\dimen@ .5\wd\z@\fi \fi \hbox to\z@{\kern\dimen@\box4\hss}\unhbox\z@}} % \end{macrocode} % \end{macro} % % \begin{macro}{\ring@cedilla} % Another cedilla like diacritical mark is the Scandinavian ring put under a letter; % the ring is taken from the metrics font, so its slot position does not depend % on the various Latin encodings; the correct positioning requires careful % examination of the letter under which it is to be placed, distinguishing the Greek % from the Latin encodings: % \begin{macrocode} \newcommand*\ring@cedilla[1]{\leavevmode {\setbox4\hbox{\metricsfont\char26}% \edef\slant@{\strip@pt\fontdimen1\font}% \dimen@-.5\wd4\ifdim\slant@\p@>\z@\advance\dimen@-.04ex\fi \setbox\z@\hbox{#1}% \ifx\cf@encoding\GRencoding@name \advance\dimen@ .45\wd\z@ \ifx#1h\advance\dimen@-.13\wd\z@\fi \ifx#1a\advance\dimen@-.07\wd\z@\fi \ifx#1o\advance\dimen@-.07\wd\z@\fi \ifx#1u\advance\dimen@+.07\wd\z@\fi \ifx#1w\advance\dimen@+.03\wd\z@\fi \else \ifx#1i\advance\dimen@.55\wd\z@\else \ifx#1r\advance\dimen@.38\wd\z@\else \ifx#1o\advance\dimen@.47\wd\z@\else \advance\dimen@0.5\wd\z@ \fi\fi\fi \fi \hbox to\z@{\kern\dimen@\box4\hss}\unhbox\z@}} % \end{macrocode} % \end{macro} % % \begin{macro}{\dot@cedilla} % Even the standard \LaTeX\ macro |dot| must be redefined with a cedilla like macro, % so as to make use of a special dot from the metric symbols font: % \begin{macrocode} \newcommand*\dot@cedilla[1]{\leavevmode {\setbox4\hbox{\metricsfont\char27}% \dimen@-.5\wd4 \setbox\tw@\hbox{i}\setbox\z@\hbox{#1}% \ifx\cf@encoding\GRencoding@name \advance\dimen@ .5\wd\z@ \ifx#1h\advance\dimen@-.13\wd\z@\fi \else \ifdim\wd\z@>\wd\tw@\advance\dimen@.55\wd\z@ \else\advance\dimen@.5\wd\tw@\fi \fi \setbox\tw@\hbox{o}\ifdim\wd\z@=\wd\tw@\advance\dimen@-.05\wd\z@\fi \hbox to\z@{\kern\dimen@\box4\hss}\unhbox\z@}} % \end{macrocode} %\end{macro} % % \begin{macro}{\tie@cedilla} % \LaTeX\ has the macro |\t| for placing a ``tie'' over two letters; philologists % require also a tie under two letters; this is why another cedilla like macro is % needed: % \begin{macrocode} \newcommand*\tie@cedilla[1]{\leavevmode {\setbox4\hbox{\fontencoding{\GRencoding@name}\selectfont\char20}% \dimen@-.5\wd4 \setbox\tw@\hbox{i}\setbox\z@\hbox{#1}% \ifx\cf@encoding\GRencoding@name \advance\dimen@.5\wd\z@ \ifx#1h\advance\dimen@-.1\wd\z@\fi \ifx#1u\advance\dimen@.15\wd\z@\fi \else \ifdim\wd\z@>\wd\tw@\advance\dimen@ .55\wd\z@ \else\advance\dimen@ .5\wd\tw@\fi \fi \setbox\tw@\hbox{o}\ifdim\wd\z@=\wd\tw@\advance\dimen@-.05\wd\z@\fi \hbox to\z@{\kern\dimen@\box4\hss}\unhbox\z@}} % \end{macrocode} % \end{macro} % % \subsection{Extended accent definitions} % We will use those service macros in the definition of several accent like macros % that keep all the intricacies away from the user. Meanwhile we input from % a separate file |LGRaccent-glyph.def| a whole set of extended accent macros % slightly adapted from those contained in G\"unter Milde's definition file. % In particular the \LaTeX\ kernel macros are used in order to declare accents, % composite glyphs, composite commands, and the like; these are used as the default % definitions; afterwards other definitions will be given that work when these % composite macros don't work. % In other words, while |\~| and |u| in Greek form the composite glyph ``upsilon % with circumflex'' that exists in the Greek font table, the same macro |\~| and the % letter |k| produce the superposition of a circumflex on top of a ``kappa'' glyph, % since this glyph does not exist in the Greek font table. % Notice that all these declarations are restricted to the Greek font encoding so % they are usable only when such font is in force. See the |teubner-doc.pdf| file % for more details concerning the usefulness of the extended accent macros vs.\ the % ligature mechanism. % % \begin{macrocode} \input{LGRaccents-glyphs.def} % \end{macrocode} % % \subsection{Special accent macros} % Now we come back to the ``accent like'' and ``cedilla like'' general macros we % defined above, and that will be extensively used in the following definitions. % Note that for what the circumflex is concerned, when |teubner| is in effect it is % not defined as an active character and does not work as a non breaking space. The % command |\~| and its equivalent |\GRcirc| is just an accent macro; how do you put % a non breaking space in a Greek context? By simply using the \LaTeX\ kernel macro % |\nobreakspace|; when typesetting with non-Greek fonts the |~| is certainly handy % to insert a non breaking space (a tie), but for polytonic Greek spelling in the % past 15 years or so the Greek language definition file has always used the |~| % sign a a letter, not as an active character. If you look in the \babel\ package % documentation related to the Greek language, you find that for what concerns the % |~| with polytonic spelling a number ot ``dirty tricks'' have been used, but % nothing has been done to replace the ``tie'' function of this character when % typesetting in languages that use the Latin script; the only action related to % this point has been to redefine the kernel macros for typesetting figure and table % captions so as to substitute the |~| character with its explicit definition % |\nobreakspace|. It is necessary to do the same when this package is used, % although a shorter command |\nbs| is provided in order to simplify the input % keying. % \begin{macrocode} \let\nbs\nobreakspace % \end{macrocode % % Having defined the Greek accents with the extended macroso input with the % |LGRaccents-glyphs.def| file, we can let some equivalences so that such accents % may be used with shorter control sequences that are coherent with the % corresponding ligatures. % \begin{macrocode} % grave \DeclareTextCommand{\`}{\GRencoding@name}[1]{\lift@accent{96}{#1}} % acute \DeclareTextCommand{\'}{\GRencoding@name}[1]{\lift@accent{39}{#1}} % circumflex \DeclareTextCommand{\~}{\GRencoding@name}[1]{\lift@accent{126}{#1}} \let\GRcirc\Perispomeni % \end{mcrocode} % But we have to provide also the means for disabling the |~| shorthand that is % reset every time the Greek language is selected again in a multilanguage document % where language shifts take place quite often; we must also counteract the % resetting of the |\~| definition performed by the |greek.ld| file in every % language shift; it is not important to add the accent re-definition to the % |\extrasgreek| macro, because when this macro is executed the last definition % given is the one that lasts until the next language shift. % \begin{macrocode} \addto\extrasgreek{\shorthandoff{~}\let\~\Perispomeni} \addto\noextrasgreek{\shorthandon{~}} % \end{macrocode} % For the diaeresis we need to put an invisible character (|v| in the LGR encoded CB % fonts) in order to avoid any ligature with an implied end of word (boundarychar) % that turns the diaeresis into an apostrophe. % \begin{macrocode} % diaeresis \DeclareTextCommand{\"}{\GRencoding@name}[1]{\lift@accent{34v}{#1}} % breve \DeclareTextCommand{\u}{\GRencoding@name}[1]{\lift@accent{30}{#1}} % \end{macrocode} % Besides the normal |\u| command for setting a breve command, another ``large % breve'' is required by philologists, who need to mark a diphthong, or in general % two letters; the macro |\U| does the job, but it is the typesetter's % responsibility to input the macro argument as made of two letters (possibly with % their own accents): % \begin{macrocode} \DeclareTextCommand{\U}{\GRencoding@name}[1]{\lift@accent{151}{#1}} % macron \DeclareTextCommand{\=}{\GRencoding@name}[1]{\lift@accent{31}{#1}} % rough \DeclareTextCommand{\r}{\GRencoding@name}[1]{\lift@accent{60}{#1}} % smooth \DeclareTextCommand{\s}{\GRencoding@name}[1]{\lift@accent{62}{#1}} % acute+diaeresis \DeclareTextCommand{\Ad}{\GRencoding@name}[1]{\lift@accent{35}{#1}} % grave+diaeresis \DeclareTextCommand{\Gd}{\GRencoding@name}[1]{\lift@accent{36}{#1}} % circumflex+diaeresis \DeclareTextCommand{\Cd}{\GRencoding@name}[1]{\lift@accent{32}{#1}} % acute+rough \DeclareTextCommand{\Ar}{\GRencoding@name}[1]{\lift@accent{86}{#1}} % grave+rough \DeclareTextCommand{\Gr}{\GRencoding@name}[1]{\lift@accent{67}{#1}} % circumflex+rough \DeclareTextCommand{\Cr}{\GRencoding@name}[1]{\lift@accent{64}{#1}} % acute+smooth \DeclareTextCommand{\As}{\GRencoding@name}[1]{\lift@accent{94}{#1}} % grave+smooth \DeclareTextCommand{\Gs}{\GRencoding@name}[1]{\lift@accent{95}{#1}} % circumflex+smooth \DeclareTextCommand{\Cs}{\GRencoding@name}[1]{\lift@accent{92}{#1}} % \end{macrocode} % Most of the above accent commands are used again in order to tie a text symbol % meaning to certain combinations, that is when they receive as argument a vowel % whose accented glyph is present in the font; in this way in order to type % ``alpha with rough breath, acute accent and iota subscript'' you can type % \verb"<'a|", or \verb"\Ar{a}|" or |\arai| or \verb+\<'a|+, if you use Milde's % accent macros; the advantage of using the first notation is its short string; the % advantage of the second is that it does not break kerning commands with a % preceeding letter; the advantage of the third is that it does not break any % kerning either before or after; the fourth solution produces the same result as % the third, but it's easier to make up and you don't have to memorize any specific % naming rule for accented glyphs. With the Lipsian font this trick is particularly % useful for any sequence of alpha and upsilon each one with its own accents and/or % diaresis. % % In Greek the regular cedilla is meaningless, so that |\c| may be redefined % as a semivowel command; at the same time the typesetter might be more % comfortable if he could use always the same, although longer, macro for % marking a vowel as a semivowel one; therefore |\c| plays the same role % in Greek as |\semiv|. % \begin{macrocode} % cap cedilla \DeclareTextCommand{\c}{\GRencoding@name}[1]{\cap@cedilla{#1}} \DeclareTextCommand{\semiv}{\GRencoding@name}[1]{\cap@cedilla{#1}} \DeclareTextCommand{\semiv}{OT1}[1]{\cap@cedilla{#1}} \DeclareTextCommand{\semiv}{T1}[1]{\cap@cedilla{#1}} % ring cedilla \DeclareTextCommand{\ring}{\GRencoding@name}[1]{\ring@cedilla{#1}} \DeclareTextCommand{\ring}{OT1}[1]{\ring@cedilla{#1}} \DeclareTextCommand{\ring}{T1}[1]{\ring@cedilla{#1}} % dot cedilla \DeclareTextCommand{\Dot}{\GRencoding@name}[1]{\dot@cedilla{#1}} \DeclareTextCommand{\Dot}{OT1}[1]{\dot@cedilla{#1}} \DeclareTextCommand{\Dot}{T1}[1]{\dot@cedilla{#1}} % tie cedilla \DeclareTextCommand{\ut}{\GRencoding@name}[1]{\tie@cedilla{#1}} \DeclareTextCommand{\ut}{OT1}[1]{\tie@cedilla{#1}} \DeclareTextCommand{\ut}{T1}[1]{\tie@cedilla{#1}} % % Acute breve \DeclareTextCommand{\Ab}{\GRencoding@name}[1]% {\LIFT@accent{39}{-.15ex}{\lift@accent{30}{#1}}} % Grave breve \DeclareTextCommand{\Gb}{\GRencoding@name}[1]% {\LIFT@accent{96}{-.15ex}{\lift@accent{30}{#1}}} % Acute rough breve \DeclareTextCommand{\Arb}{\GRencoding@name}[1]% {\LIFT@accent{86}{-.15ex}{\lift@accent{30}{#1}}} % Grave rough breve \DeclareTextCommand{\Grb}{\GRencoding@name}[1]% {\LIFT@accent{67}{-.15ex}{\lift@accent{30}{#1}}} % Acute smooth breve \DeclareTextCommand{\Asb}{\GRencoding@name}[1]% {\LIFT@accent{94}{-.15ex}{\lift@accent{30}{#1}}} % Grave smooth breve \DeclareTextCommand{\Gsb}{\GRencoding@name}[1]% {\LIFT@accent{95}{-.15ex}{\lift@accent{30}{#1}}} % % Acute macron \DeclareTextCommand{\Am}{\GRencoding@name}[1]% {\Lift@accent{39}{\lift@accent{31}{#1}}} % Grave macron \DeclareTextCommand{\Gm}{\GRencoding@name}[1]% {\Lift@accent{96}{\lift@accent{31}{#1}}} % Circumflex macron \DeclareTextCommand{\Cm}{\GRencoding@name}[1]% {\Lift@accent{126}{\lift@accent{31}{#1}}} % Acute rough macron \DeclareTextCommand{\Arm}{\GRencoding@name}[1]% {\Lift@accent{86}{\lift@accent{31}{#1}}} % Grave rough macron \DeclareTextCommand{\Grm}{\GRencoding@name}[1]% {\Lift@accent{67}{\lift@accent{31}{#1}}} % Circumflex rough macron \DeclareTextCommand{\Crm}{\GRencoding@name}[1]% {\Lift@accent{64}{\lift@accent{31}{#1}}} % Acute smooth macron \DeclareTextCommand{\Asm}{\GRencoding@name}[1]% {\Lift@accent{94}{\lift@accent{31}{#1}}} % Grave smooth macron \DeclareTextCommand{\Gsm}{\GRencoding@name}[1]% {\Lift@accent{95}{\lift@accent{31}{#1}}} % Circumflex smooth macron \DeclareTextCommand{\Csm}{\GRencoding@name}[1]% {\Lift@accent{92}{\lift@accent{31}{#1}}} % smooth macron \DeclareTextCommand{\Sm}{\GRencoding@name}[1]% {\Lift@accent{62}{\lift@accent{31}{#1}}} % rough macron \DeclareTextCommand{\Rm}{\GRencoding@name}[1]% {\Lift@accent{60}{\lift@accent{31}{#1}}} % breve and dieresis \DeclareTextCommand{\bd}{\GRencoding@name}[1]% {\LIFT@accent{30}{-.1ex}{\lift@accent{34v}{#1}}} % % iota subscript \DeclareTextCommand{\iS}{\GRencoding@name}[1] {\ooalign{#1\crcr\hidewidth\char124\hidewidth}} % \end{macrocode} % % \begin{macro}{\d} % The |\d| macro must be made available also with the Greek encoding % \begin{macrocode} \DeclareTextCommand{\d}{\GRencoding@name}[1]% {\leavevmode\bgroup\o@lign{\relax#1\crcr \hidewidth\sh@ft{10}.\hidewidth}\egroup} % \end{macrocode} % \end{macro} % % Some other philologist diacritical marks are needed. % % \begin {macro}{\Open} % The |\Open| macro sets a special sign under a letter in order % to mark it with an open pronunciation. % \begin{macrocode} \DeclareRobustCommand{\Open}[1]{\leavevmode {\setbox4\hbox{\raise-.33ex\hbox{\metricsfont\char14}}% \dimen@-.5\wd4 \setbox\tw@\hbox{i}\setbox\z@\hbox{#1}% \ifx\cf@encoding\GRencoding@name \advance\dimen@ .5\wd\z@ \setbox\tw@\hbox{h}\ifdim\wd\z@=\wd\tw@\advance\dimen@-.13\wd\z@\fi \else \ifdim\wd\z@>\wd\tw@\advance\dimen@ .55\wd\z@ \else\advance\dimen@ .5\wd\tw@\fi \fi \setbox\tw@\hbox{o}\ifdim\wd\z@=\wd\tw@\advance\dimen@-.05\wd\z@\fi \hbox to\z@{\kern\dimen@\box4\hss}\unhbox\z@}} % \end{macrocode} % \end{macro} % \begin {macro}{\nasal} % The macro |\nasal| marks a letter for a nasal pronunciation. % \begin{macrocode} \DeclareRobustCommand{\nasal}[1]{\leavevmode {\setbox4\hbox{\raise-1.7ex\hbox{\GEcq}}% \dimen@-.5\wd4 \setbox\tw@\hbox{i}\setbox\z@\hbox{#1}% \ifx\cf@encoding\GRencoding@name \advance\dimen@ .5\wd\z@ \setbox\tw@\hbox{h}\ifdim\wd\z@=\wd\tw@\advance\dimen@-.13\wd\z@\fi \else \ifdim\wd\z@>\wd\tw@\advance\dimen@ .55\wd\z@ \else\advance\dimen@ .5\wd\tw@\fi \fi \setbox\tw@\hbox{o}\ifdim\wd\z@=\wd\tw@\advance\dimen@-.05\wd\z@\fi \hbox to\z@{\kern\dimen@\box4\hss}\unhbox\z@}} % \end{macrocode} % \end{macro} %\begin {macro}{\tenaspir} % Similarly |\tenaspir| marks a ``tenuis aspiratio'' % \begin{macrocode} \DeclareRobustCommand{\tenaspir}[1]{#1\/% {\fontencoding{\GRencoding@name}\selectfont\'|, % |\>'|, |\'\>|, |\'>| at your choice. Moreover you can always postfix the mark for % the iota subscribed at the right of the letter, without any need o memorising % complicated names. % \begin{macrocode} \ifGlyphNames \DeclareTextSymbol{\ag}{\GRencoding@name}{128} \DeclareTextSymbol{\ar}{\GRencoding@name}{129} \DeclareTextComposite{\r}{\GRencoding@name}{a}{129} \DeclareTextSymbol{\as}{\GRencoding@name}{130} \DeclareTextComposite{\s}{\GRencoding@name}{a}{130} \DeclareTextSymbol{\aa}{\GRencoding@name}{136} \DeclareTextSymbol{\ac}{\GRencoding@name}{144} \DeclareTextSymbol{\ai}{\GRencoding@name}{248} \DeclareTextSymbol{\aai}{\GRencoding@name}{140} \DeclareTextSymbol{\aci}{\GRencoding@name}{148} \DeclareTextSymbol{\agi}{\GRencoding@name}{132} \DeclareTextSymbol{\ara}{\GRencoding@name}{137} \DeclareTextComposite{\Ar}{\GRencoding@name}{a}{137} \DeclareTextSymbol{\arc}{\GRencoding@name}{145} \DeclareTextComposite{\Cr}{\GRencoding@name}{a}{145} \DeclareTextSymbol{\arg}{\GRencoding@name}{131} \DeclareTextComposite{\Gr}{\GRencoding@name}{a}{131} \DeclareTextSymbol{\ari}{\GRencoding@name}{133} \DeclareTextSymbol{\asa}{\GRencoding@name}{138} \DeclareTextComposite{\As}{\GRencoding@name}{a}{138} \DeclareTextSymbol{\asc}{\GRencoding@name}{146} \DeclareTextComposite{\Cs}{\GRencoding@name}{a}{146} \DeclareTextSymbol{\asg}{\GRencoding@name}{139} \DeclareTextComposite{\Gs}{\GRencoding@name}{a}{139} \DeclareTextSymbol{\asi}{\GRencoding@name}{134} \DeclareTextSymbol{\argi}{\GRencoding@name}{135} \DeclareTextSymbol{\arai}{\GRencoding@name}{141} \DeclareTextSymbol{\arci}{\GRencoding@name}{149} \DeclareTextSymbol{\asai}{\GRencoding@name}{142} \DeclareTextSymbol{\asgi}{\GRencoding@name}{143} \DeclareTextSymbol{\asci}{\GRencoding@name}{150} \DeclareTextSymbol{\hg}{\GRencoding@name}{152} \DeclareTextSymbol{\hr}{\GRencoding@name}{153} \DeclareTextComposite{\r}{\GRencoding@name}{h}{153} \DeclareTextSymbol{\hs}{\GRencoding@name}{154} \DeclareTextComposite{\s}{\GRencoding@name}{h}{154} \DeclareTextSymbol{\hrg}{\GRencoding@name}{163} \DeclareTextComposite{\Gr}{\GRencoding@name}{h}{163} \DeclareTextSymbol{\hgi}{\GRencoding@name}{156} \DeclareTextSymbol{\hri}{\GRencoding@name}{157} \DeclareTextSymbol{\hsi}{\GRencoding@name}{158} \DeclareTextSymbol{\hrgi}{\GRencoding@name}{167} \DeclareTextSymbol{\ha}{\GRencoding@name}{160} \DeclareTextSymbol{\hra}{\GRencoding@name}{161} \DeclareTextComposite{\Ar}{\GRencoding@name}{h}{161} \DeclareTextSymbol{\hsa}{\GRencoding@name}{162} \DeclareTextComposite{\As}{\GRencoding@name}{h}{162} \DeclareTextSymbol{\hsg}{\GRencoding@name}{171} \DeclareTextComposite{\Gs}{\GRencoding@name}{h}{171} \DeclareTextSymbol{\hai}{\GRencoding@name}{164} \DeclareTextSymbol{\hrai}{\GRencoding@name}{165} \DeclareTextSymbol{\hsai}{\GRencoding@name}{166} \DeclareTextSymbol{\hsgi}{\GRencoding@name}{175} \DeclareTextSymbol{\hc}{\GRencoding@name}{168} \DeclareTextSymbol{\hrc}{\GRencoding@name}{169} \DeclareTextComposite{\Cr}{\GRencoding@name}{h}{169} \DeclareTextSymbol{\hsc}{\GRencoding@name}{170} \DeclareTextComposite{\Cs}{\GRencoding@name}{h}{170} \DeclareTextSymbol{\hci}{\GRencoding@name}{172} \DeclareTextSymbol{\hrci}{\GRencoding@name}{173} \DeclareTextSymbol{\hsci}{\GRencoding@name}{174} \DeclareTextSymbol{\hi}{\GRencoding@name}{249} \DeclareTextSymbol{\wg}{\GRencoding@name}{176} \DeclareTextSymbol{\wr}{\GRencoding@name}{177} \DeclareTextComposite{\r}{\GRencoding@name}{w}{177} \DeclareTextSymbol{\ws}{\GRencoding@name}{178} \DeclareTextComposite{\s}{\GRencoding@name}{w}{178} \DeclareTextSymbol{\wrg}{\GRencoding@name}{179} \DeclareTextComposite{\Gr}{\GRencoding@name}{w}{179} \DeclareTextSymbol{\wgi}{\GRencoding@name}{180} \DeclareTextSymbol{\wri}{\GRencoding@name}{181} \DeclareTextSymbol{\wsi}{\GRencoding@name}{182} \DeclareTextSymbol{\wrgi}{\GRencoding@name}{183} \DeclareTextSymbol{\wa}{\GRencoding@name}{184} \DeclareTextSymbol{\wra}{\GRencoding@name}{185} \DeclareTextComposite{\Ar}{\GRencoding@name}{w}{185} \DeclareTextSymbol{\wsa}{\GRencoding@name}{186} \DeclareTextComposite{\As}{\GRencoding@name}{w}{186} \DeclareTextSymbol{\wsg}{\GRencoding@name}{187} \DeclareTextComposite{\Gs}{\GRencoding@name}{w}{187} \DeclareTextSymbol{\wai}{\GRencoding@name}{188} \DeclareTextSymbol{\wrai}{\GRencoding@name}{189} \DeclareTextSymbol{\wsai}{\GRencoding@name}{190} \DeclareTextSymbol{\wsgi}{\GRencoding@name}{191} \DeclareTextSymbol{\wc}{\GRencoding@name}{192} \DeclareTextSymbol{\wrc}{\GRencoding@name}{193} \DeclareTextComposite{\Cr}{\GRencoding@name}{w}{193} \DeclareTextSymbol{\wsc}{\GRencoding@name}{194} \DeclareTextComposite{\Cs}{\GRencoding@name}{w}{194} \DeclareTextSymbol{\wci}{\GRencoding@name}{196} \DeclareTextSymbol{\wrci}{\GRencoding@name}{197} \DeclareTextSymbol{\wsci}{\GRencoding@name}{198} \DeclareTextSymbol{\wi}{\GRencoding@name}{250} \DeclareTextSymbol{\ig}{\GRencoding@name}{200} \DeclareTextSymbol{\ir}{\GRencoding@name}{201} \DeclareTextComposite{\r}{\GRencoding@name}{i}{201} \DeclareTextSymbol{\is}{\GRencoding@name}{202} \DeclareTextComposite{\s}{\GRencoding@name}{i}{202} \DeclareTextSymbol{\irg}{\GRencoding@name}{203} \DeclareTextComposite{\Gr}{\GRencoding@name}{i}{203} \DeclareTextSymbol{\ia}{\GRencoding@name}{208} \DeclareTextSymbol{\ira}{\GRencoding@name}{209} \DeclareTextComposite{\Ar}{\GRencoding@name}{i}{209} \DeclareTextSymbol{\isa}{\GRencoding@name}{210} \DeclareTextComposite{\As}{\GRencoding@name}{i}{210} \DeclareTextSymbol{\isg}{\GRencoding@name}{211} \DeclareTextComposite{\Gs}{\GRencoding@name}{i}{211} \DeclareTextSymbol{\ic}{\GRencoding@name}{216} \DeclareTextSymbol{\irc}{\GRencoding@name}{217} \DeclareTextComposite{\Cr}{\GRencoding@name}{i}{217} \DeclareTextSymbol{\isc}{\GRencoding@name}{218} \DeclareTextComposite{\Cs}{\GRencoding@name}{i}{218} \DeclareTextSymbol{\id}{\GRencoding@name}{240} \DeclareTextSymbol{\idg}{\GRencoding@name}{241} \DeclareTextComposite{\Gd}{\GRencoding@name}{i}{241} \DeclareTextSymbol{\ida}{\GRencoding@name}{242} \DeclareTextComposite{\Ad}{\GRencoding@name}{i}{242} \DeclareTextSymbol{\idc}{\GRencoding@name}{243} \DeclareTextComposite{\Cd}{\GRencoding@name}{i}{243} \DeclareTextSymbol{\ug}{\GRencoding@name}{204} \DeclareTextSymbol{\ur}{\GRencoding@name}{205} \DeclareTextComposite{\r}{\GRencoding@name}{u}{205} \DeclareTextSymbol{\us}{\GRencoding@name}{206} \DeclareTextComposite{\s}{\GRencoding@name}{u}{206} \DeclareTextSymbol{\urg}{\GRencoding@name}{207} \DeclareTextComposite{\Gr}{\GRencoding@name}{u}{207} \DeclareTextSymbol{\ua}{\GRencoding@name}{212} \DeclareTextSymbol{\ura}{\GRencoding@name}{213} \DeclareTextComposite{\Ar}{\GRencoding@name}{u}{213} \DeclareTextSymbol{\usa}{\GRencoding@name}{214} \DeclareTextComposite{\As}{\GRencoding@name}{u}{214} \DeclareTextSymbol{\usg}{\GRencoding@name}{215} \DeclareTextComposite{\Gs}{\GRencoding@name}{u}{215} \DeclareTextSymbol{\uc}{\GRencoding@name}{220} \DeclareTextSymbol{\urc}{\GRencoding@name}{221} \DeclareTextComposite{\Cr}{\GRencoding@name}{u}{221} \DeclareTextSymbol{\usc}{\GRencoding@name}{222} \DeclareTextComposite{\Cs}{\GRencoding@name}{u}{222} \DeclareTextSymbol{\ud}{\GRencoding@name}{244} \DeclareTextSymbol{\udg}{\GRencoding@name}{245} \DeclareTextComposite{\Gd}{\GRencoding@name}{u}{245} \DeclareTextSymbol{\uda}{\GRencoding@name}{246} \DeclareTextComposite{\Ad}{\GRencoding@name}{u}{246} \DeclareTextSymbol{\udc}{\GRencoding@name}{247} \DeclareTextComposite{\Cd}{\GRencoding@name}{u}{247} \DeclareTextSymbol{\eg}{\GRencoding@name}{224} \DeclareTextSymbol{\er}{\GRencoding@name}{225} \DeclareTextComposite{\r}{\GRencoding@name}{e}{225} \DeclareTextSymbol{\es}{\GRencoding@name}{226} \DeclareTextComposite{\s}{\GRencoding@name}{e}{226} \DeclareTextSymbol{\erg}{\GRencoding@name}{227} \DeclareTextComposite{\Gr}{\GRencoding@name}{e}{227} \DeclareTextSymbol{\ea}{\GRencoding@name}{232} \DeclareTextSymbol{\era}{\GRencoding@name}{233} \DeclareTextComposite{\Ar}{\GRencoding@name}{e}{233} \DeclareTextSymbol{\esa}{\GRencoding@name}{234} \DeclareTextComposite{\As}{\GRencoding@name}{e}{234} \DeclareTextSymbol{\esg}{\GRencoding@name}{235} \DeclareTextComposite{\Gs}{\GRencoding@name}{e}{235} \DeclareTextSymbol{\oR}{\GRencoding@name}{229} \DeclareTextComposite{\r}{\GRencoding@name}{o}{229} \DeclareTextSymbol{\og}{\GRencoding@name}{228} \DeclareTextSymbol{\os}{\GRencoding@name}{230} \DeclareTextComposite{\s}{\GRencoding@name}{o}{230} \DeclareTextSymbol{\org}{\GRencoding@name}{231} \DeclareTextComposite{\Gr}{\GRencoding@name}{o}{231} \DeclareTextSymbol{\oa}{\GRencoding@name}{236} \DeclareTextSymbol{\ora}{\GRencoding@name}{237} \DeclareTextComposite{\Ar}{\GRencoding@name}{o}{237} \DeclareTextSymbol{\osa}{\GRencoding@name}{238} \DeclareTextComposite{\As}{\GRencoding@name}{o}{238} \DeclareTextSymbol{\osg}{\GRencoding@name}{239} \DeclareTextComposite{\Gs}{\GRencoding@name}{o}{239} \DeclareTextSymbol{\rr}{\GRencoding@name}{251} \DeclareTextComposite{\r}{\GRencoding@name}{r}{251} \DeclareTextSymbol{\rs}{\GRencoding@name}{252} \DeclareTextComposite{\s}{\GRencoding@name}{r}{252} \DeclareTextSymbol{\Id}{\GRencoding@name}{219} \DeclareTextSymbol{\Ud}{\GRencoding@name}{223} \DeclareTextComposite{\"}{\GRencoding@name}{U}{223} \fi % % \end{macrocode} % % \subsection{Text philological symbols and macros} % Next come some short macros for inserting special symbols that philologists % use quite often in Greek. %\begin{macro}{\h} % Macro |\h| is used to insert a Latin ``h'' while typesetting in Greek. %\begin{macro}{\q} % Macro |\q| is used to insert a Latin ``q'' while typesetting in Greek. %\begin{macro}{\yod} %\begin{macro}{\iod} % Macros |\yod| and |\iod| are used to insert a % Latin ``j'' while typesetting in Greek; the control sequence |\jod| was avoided in % order to reduce the possibility of typing |\jot| which is a \TeX\ internal % dimension. % \begin{macrocode} \DeclareTextCommand{\h}{\GRencoding@name}% {{\fontencoding{OT1}\selectfont h}} \DeclareTextCommand{\q}{\GRencoding@name}% {{\fontencoding{OT1}\selectfont q}} \DeclareTextCommand{\yod}{\GRencoding@name}% {{\fontencoding{OT1}\selectfont j}}% \let\iod\yod % \end{macrocode} %\end{macro} %\end{macro} %\end{macro} %\end{macro} % %\begin {macro}{\f} %\begin {macro}{\F} %\begin {macro}{\digamma} %\begin {macro}{\Digamma} % At the same time it was believed that for inserting lower and upper case % ``digamma'' it was preferable to use short macros and to avoid the dilemma between % the |\ddigamma| and the |\digamma| macros, the former being the % one defined in the \texttt{greek} extension to \babel, the latter being % a standard mathematical symbol; initially I believed that philologists do % not use mathematical symbols so we made |\digamma| an alias for |\f|; afterwards I % found out that mathematicians, physicists, engineers,~\dots\ use the % \textsf{teubner.sty} package and that the |\digamma| is a symbol already defined % in the package \textsf{amssymb.sty}; therefore I made a conditional creation of % this alias; this trick is delayed to the beginning of the document, so as to make % it independent on the order with which packages are loaded. % \begin{macrocode} \DeclareTextSymbol{\f}{\GRencoding@name}{147} \AtBeginDocument{\@ifpackageloaded{amssymb}% {\let\AMSdigamma\digamma\def\digamma{\textormath{\f}{\AMSdigamma}}}% amssymb loaded {\let\digamma\f}% amssymb not loadedloaded } \DeclareTextSymbol{\F}{\GRencoding@name}{195}\let\Digamma\F % \end{macrocode} %\end{macro} %\end{macro} %\end{macro} %\end{macro} % %\begin {macro}{\fLow} %\begin {macro}{\fHigh} % The digamma glyphs set forth another question because, according to Paolo Ciacchi, % a different glyph should be used for typesetting text compared with the one that % is used as a variant in Milesian numerals in place of the standard stigma symbol. % By means of macros |\fLow| or |\fHigh| it is possible to chose the raised or the % lowered digamma glyphs; Greek numerals always use the lowered one, while when text % is being typeset the typesetter can chose the version he likes best. % \begin{macrocode} \DeclareRobustCommand{\fLow}% {{\setbox\z@\hbox{\f}\dimen@\ht\z@ \advance\dimen@-1ex\raise-\dimen@\hbox{\box\z@}}} \DeclareRobustCommand{\fHigh}% {{\setbox\z@\hbox{\f}\dimen@\dp\z@\raise\dimen@\hbox{\box\z@}}} % \end{macrocode} %\end{macro} %\end{macro} % %\begin{macro}{\qmark} %\begin{macro}{\lpar} %\begin{macro}{\rpar} %\begin{macro}{\frapar} % Here we start a set of miscellaneous macros. We begin with some parentheses % that should turn out in upright shape, even if the default font is the Lipsian % one which is oblique; its parentheses are oblique as in all oblique fonts, % therefore we need to quietly change fonts behind the scenes. The same is true with % the question mark that, philologically speaking, represents an uncertain element, % not the termination of a real question; it should therefore always come out % between parentheses and in upright shape from a Latin font. While the % parenthesized question mark comes from the OT1 Latin upright font, the parentheses % obtained with |\lpar| and |\rpar| are taken from the metric symbols font, as well % as the parentheses used in the parenthesized text processed with macro |\frapar|. % \begin{macrocode} \DeclareRobustCommand\qmark{\hskip.16ex{\fontencoding{OT1}\upshape(?)}} \DeclareRobustCommand\lpar{{\metricsfont(}} \DeclareRobustCommand\rpar{{\metricsfont)}} \DeclareRobustCommand\frapar[1]{\lpar#1\rpar} % \end{macrocode} %\end{macro} %\end{macro} %\end{macro} %\end{macro} % %\begin{macro}{\ap} % The apex/superscript macro |\ap| does not differ much from the plain standard % \LaTeX\ macro |\textsuperscript|, the only difference being the italic correction % that precedes |\textsuperscript|. % \begin{macrocode} \DeclareRobustCommand{\ap}[1]{\/\textsuperscript{#1}} % \end{macrocode} %\end{macro} % %\begin{macro}{\Dots} %\begin{macro}{\DOTS} %\begin{macro}{\Dashes} %\begin{macro}{\DASHES} % Four macros are defined so as to insert a certain number of dots or dashes as % specified in the optional command argument; |\Dots| and |\Dashes| fit the dots or % the dashes pretty close together, while |\DOTS| and |\DASHES| fit them more % loosely apart. % \begin{macrocode} \newcommand\Dots[1][1]{{\count255=#1\@whilenum\count255>\z@ \do{\kern.4ex\d{v}\kern.4ex\advance\count255\m@ne}}} \newcommand\DOTS[1][1]{{\count255=#1\@whilenum\count255>\z@ \do{\kern.8ex\d{v}\kern.8ex\advance\count255\m@ne}}} \newcommand\Dashes[1][1]{{\count255=#1\@whilenum\count255>\z@ \do{\kern.4ex--\kern.4ex\advance\count255\m@ne}}} \newcommand\DASHES[1][1]{{\count255=#1\@whilenum\count255>\z@ \do{\kern.8ex--\kern.8ex\advance\count255\m@ne}}} % \end{macrocode} %\end{macro} %\end{macro} %\end{macro} %\end{macro} % %\begin{macro}{\:} %\begin{macro}{\;} %\begin{macro}{\?} %\begin{macro}{\MutPers} % Greek text or poetry sometimes requires some stacked dots; here we prepared macros % for two (|\:|), three (|\;|), and four (|\?|) stacked dots. Two stacked dots in a % row indicate that the speaker of a drama or comedy has changed (\textit{mutatio % personae}). For |\:| and |\;| it is necessary to preserve the mathematical % meaning, while |\?| apparently does not have any previous use in standard \LaTeX. % The real macros are |\tw@dots|, |\thre@dots|, % and |\f@urdots|. % \begin{macrocode} \DeclareRobustCommand{\:}{\textormath{\tw@dots}{\mskip\medmuskip}} \DeclareRobustCommand{\;}{\textormath{\thre@dots}{\mskip\thickmuskip}} \DeclareRobustCommand{\?}{\f@urdots} \DeclareRobustCommand{\mutpers}{\makebox[1ex]{\:\hfill\:}\space} \let\MutPers\mutpers\let\antilabe\mutpers \def\tw@dots{\mbox{\kern1\p@\vbox to1ex{\hbox{.}\vss\hbox{.}}}} \def\thre@dots{\mbox{\kern1\p@\vbox to 2ex{\hbox{.}\vss \hbox{.}\vss\hbox{.}}}} \def\f@urdots{\mbox{\kern1\p@\vbox to 2ex{\hbox{.}\vss \hbox{.}\vss\hbox{.}\vss\hbox{.}}}} % \end{macrocode} %\end{macro} %\end{macro} %\end{macro} %\end{macro} % % \DeleteShortVerb{\|} %\begin{macro}{\|} % \MakeShortVerb{\|} %\begin{macro}{\dBar} %\begin{macro}{\tBar} % Similarly Greek text and poetry require certain \emph{cesurae} indicated with % vertical bars; we provided commands for one (\verb"\|"), two (|\dBar|), and % three (|\tBar|) vertical bars. % \begin{macrocode} \DeclareRobustCommand{\|}{\relax\ensuremath{\mskip2mu\vert}} \DeclareRobustCommand{\dBar}{\ensuremath{\vert\vert}} \DeclareRobustCommand{\tBar}{\ensuremath{\vert\vert\vert}} % \end{macrocode} %\end{macro} %\end{macro} %\end{macro} % %\begin{macro}{\negthinspace} %\begin{macro}{\posthinspace} %\begin{macro}{\posthindspace} %\begin{macro}{\,} %\begin{macro}{\!} % The following are mostly service macros for adjusting the spacing within macro % definitions. Nevertheless they are available also to the typesetter, because % sometimes certain glyph combinations require a little adjustment. Of course the % typesetter will not use them at the very beginning, but only during proof % revision, so as to introduce them only where really necessary. % \begin{macrocode} \def\negthinspace{\nobreak\hskip-0.07em} \def\posthinspace{\nobreak\hskip0.07em} \def\posthindspace{\nobreak\hskip0.14em} \renewcommand{\,}{\textormath{\posthinspace}{\mskip\thinmuskip}} \renewcommand{\!}{\textormath{\negthinspace}{\mskip-\thinmuskip}} % \end{macrocode} %\end{macro} %\end{macro} %\end{macro} %\end{macro} %\end{macro} % %\begin{macro}{\lbrk} %\begin{macro}{\rbrk} %\begin{macro}{\lmqi} %\begin{macro}{\rmqi} %\begin{macro}{\lmqs} %\begin{macro}{\rmqs} %\begin{macro}{\mqi} %\begin{macro}{\mqs} %\begin{macro}{\Ladd} %\begin{macro}{\LLadd} %\begin{macro}{\ladd} %\begin{macro}{\lladd} %\begin{macro}{\lesp} %\begin{macro}{\ldel} % Philologists require a certain number of special parentheses in order to % enclose parts of text that are doubtful or that have been added although % they are missing from the original manuscripts; even letter strings that have % been modified under the assumption that the copyist made some error. % Such enclosing marks include angle brackets, square brackets, upper part % of square brackets, lower part of square brackets. Such symbols may even % appear doubled. Most of these glyphs have been designed anew, because they % are missing or are inadequate if they are taken from the usual CM fonts (either % text or math fonts). Brackets for example have been designed as to be higher % and deeper than the font total height, so as not to interfere with Greek % accents and to accomodate for at least one level of nesting (for example square % brackets enclosing lower part of square brackets. The single glyphs may be used % directly by the typesetter, but we think that the commands requiring some text are % far more useful. |\Ladd| and its double version |\LLadd| enclose text that should % be added for sure. % |\ladd| and its double version |\lladd| enclose text that probably should be % added. |\lesp| and its synonymous |\ldel| enclose text that should be deleted. % |\mqi| surrounds some text with the lower part of open and closed square brackets. % |\mqs| surrounds some text with the upper part of open and closed square brackets. % See \texttt{teubenr-doc.pdf} for samples of such commands. % \begin{macrocode} \DeclareRobustCommand{\lbrk}{{\metricsfont\posthindspace[\negthinspace}} \DeclareRobustCommand{\rbrk}{{\metricsfont]}} \DeclareRobustCommand\lmqi{{\metricsfont!}} \DeclareRobustCommand\rmqi{{\metricsfont:}} \DeclareRobustCommand\lmqs{{\metricsfont?}} \DeclareRobustCommand\rmqs{{\metricsfont;}} \DeclareRobustCommand\mqi[1]{\posthinspace\lmqi\negthinspace {#1\/}\rmqi}\let\mezzeq\mqi \DeclareRobustCommand\mqs[1]{\lmqs{#1\/}\rmqs} \DeclareRobustCommand{\Ladd}[1]{{\metricsfont<}{\!\!#1\/}% {\metricsfont>}}% litterae certe addendae \DeclareRobustCommand{\LLadd}[1]{{\metricsfont<\kern-.3ex<} {\!\!#1\/}{\metricsfont>\kern-.3ex>}}% litterae certe addendae \DeclareRobustCommand{\ladd}[1]{{\metricsfont\kern.15ex[\negthinspace}% {#1\/}{\metricsfont]\kern-.15ex}}% litterae addendae \DeclareRobustCommand{\lladd}[1]{{\metricsfont\kern.15ex[\kern-.3ex[% \negthinspace}{#1\/}{\metricsfont]\kern-.3ex]% \kern-.15ex}}% litterae addendae \DeclareRobustCommand{\lesp}[1]% {\mbox{$\{\kern-.20ex$#1\kern.16ex$\}$}}% litterae delendae \let\ldel\lesp % \end{macrocode} %\end{macro} %\end{macro} %\end{macro} %\end{macro} %\end{macro} %\end{macro} %\end{macro} %\end{macro} %\end{macro} %\end{macro} %\end{macro} %\end{macro} %\end{macro} %\end{macro} % % \subsection{Greek, English, and German quotes} %\begin{macro}{\itopenquotes} %\begin{macro}{\itclosedquotes} %\begin{macro}{\itoq} %\begin{macro}{\itcq} % The following macros allow to set Italian\slash English high quotes even while % typing in Greek; such quotes are standard in Italian and in English typesetting % and their commands preserve the font family shape and series of the surrounding % font. In French typography, as well in the typographic traditions of other % countries, different quotes are used. In that case the typesetter must resort to a % change of language, for example returning to German, inputting the German quotes, % then turning back to Greek. He might as well define his own macros, or he might % clone the following definitions and change them according to his country % typographic traditions. If he decides to modify these definitions he should either % rename this file or he should put his redefinitions in a private package to be % input \emph{after} \texttt{teubner.sty}. % \begin{macrocode} \DeclareTextCommand{\itopenquotes}{\GRencoding@name}% {{\fontencoding{OT1}\selectfont\char92}}% \DeclareTextCommand{\itclosedquotes}{\GRencoding@name}% {{\fontencoding{OT1}\selectfont\char34}}% \let\itoq\itopenquotes \let\itcq\itclosedquotes % \end{macrocode} %\end{macro} %\end{macro} %\end{macro} %\end{macro} % %\begin{macro}{\GEodq} %\begin{macro}{\GEcdq} %\begin{macro}{\GEdqtext} %\begin{macro}{\GEoq} %\begin{macro}{\GEcq} %\begin{macro}{\GEqtext} %\begin{macro}{\ENodq} %\begin{macro}{\ENcdq} %\begin{macro}{\ENdqtext} % On the opposite the following German and English quotes are redesigned and % included in the metric symbols font. Since this font is in one shape and one % series, these quotes do not change as the outside font does, but remain fixed; the % most useful commands are |\GEdqtext| for enclosing some text within German double % quotes, |\GEqtext| for enclosing some text within German single quotes, and % |\ENdqtext| for enclosing some text in English double quotes. Apparently % while setting Greek poetry in stacked, possibly enumerated, verses, German double % or single quotes are often used, since they cannot be misunderstood with Greek % diacritical marks. Modern Greek double quotes apparently are not appreciated by % philologists, at least outside Greece. % \begin{macrocode} \newcommand\GEodq{\bgroup\futurelet\@tempA\GE@dq} \def\GE@dq{{\metricsfont\char18}\ifx\@tempA m\posthinspace\fi\egroup} \newcommand\GEcdq{{\metricsfont\char16}} \newcommand\GEdqtext[1]{\GEodq\posthinspace#1\/\posthinspace\GEcdq} \newcommand\GEoq{\bgroup\futurelet\@tempA\GE@q} \def\GE@q{{\metricsfont\char13}\ifx\@tempA m\posthinspace\fi\egroup} \newcommand\GEcq{{\metricsfont\char19}} \newcommand\GEqtext[1]{\GEoq\posthinspace#1\/\posthinspace\GEcq} \newcommand\ENodq{{\metricsfont\char16}} \newcommand\ENcdq{{\metricsfont\char17}} \newcommand\ENdqtext[1]{\ENodq\negthinspace#1\/\posthinspace\ENcdq} % \end{macrocode} %\end{macro} %\end{macro} %\end{macro} %\end{macro} %\end{macro} %\end{macro} %\end{macro} %\end{macro} %\end{macro} % % \subsection{Other philological symbols and macros} % \begin{macro}{\LitNil} % \begin{macro}{\litnil} % The next synonymous macros indicate the \emph{littera nihil}. % \begin{macrocode} \DeclareRobustCommand\LitNil{\textbullet} \let\litnil\LitNil % \end{macrocode} %\end{macro} %\end{macro} % %\begin{macro}{\sva} %\begin{macro}{\shva} %\begin{macro}{\shwa} % The CB fonts include also the letter ``shwa'', the glyph that % appears as a roman ``e'' rotated 180$^\circ$ around its center. Philologists % need it even when writing Greek. In order to make it available also when the % Latin encodings are in force, suitable definitions have been given so that the % suitable CB font was changed behind the scenes without any intervention by the % typesetter. With this version of |teubner.sty| a new definition is made up that % uses the |\rotatebox| facility of the |graphicx| package; In a future revision of % the CB fonts the |\schwa| slot shall be freed so that Greek glyphs only populate % it, without extraneous presences. The |\schwa| glyph is made available also with % the Latin encodings. % \begin{macrocode} %\DeclareTextSymbol{\sva}{\GRencoding@name}{26} \DeclareTextCommand{\sva}{\GRencoding@name}{% \rotatebox[origin=c]{180}{\def\@tempA{li}% \fontencoding{OT1}\ifx\f@shape\@tempA\fontshape{it}\fi\selectfont e}} \DeclareTextCommand\sva{OT1}{{\expandafter\fontencoding \expandafter{\GRencoding@name}\selectfont\sva}} \DeclareTextCommand\sva{T1}{{\expandafter\fontencoding \expandafter{\GRencoding@name}\selectfont\sva}} \let\shva\sva\let\shwa\sva % \end{macrocode} %\end{macro} %\end{macro} %\end{macro} % %\begin{macro}{\skewstack} % The |\skewstack| command stacks two arguments not one on top of the other, but the % second argument is placed to the right and upwards relative to the first argument. % The second argument is set in script font size. Although there are similarities % with the |\textsuperscript| command, the exact placement of the second argument % depends on the shape (height and depth) of both arguments. This command will be % used for creating some philologist's symbols, but is readily available to the % typesetter both for direct use and for writing macros defining new symbols. % \begin{macrocode} \DeclareRobustCommand\skewstack[2]{{% \edef\slant@{\strip@pt\fontdimen1\font}% \setbox\z@\hbox{#1}\dimen@\ht\z@\box\z@ \kern-.045em\setbox\@ne\hbox{\scriptsize#2}% \ifdim\dimen@>1.2ex\advance\dimen@-\ht\@ne\else \dimen@1ex\advance\dimen@-.5\ht\@ne\fi \kern\slant@\dimen@\raise\dimen@\hbox{\box\@ne}}} % \end{macrocode} %\end{macro} % %\begin{macro}{\hv} %\begin{macro}{\qw} %\begin{macro}{\gw} %\begin{macro}{\gusv} %\begin{macro}{\qusv} %\begin{macro}{\qu} % Matter of fact some common Latin stacked symbols are defined here in terms of % |\skewstack|. As it may bee seen, the second argument (the first as well, but here % there are no examples) may in turn contain other macros for composite symbols. % \begin{macrocode} \DeclareRobustCommand\hv{{\fontencoding{OT1}\selectfont \skewstack{h}{v}}} \DeclareRobustCommand\qw{{\fontencoding{OT1}\selectfont \skewstack{q}{w}}} \DeclareRobustCommand\gw{{\fontencoding{OT1}\selectfont \skewstack{g}{w}}} \DeclareRobustCommand\gusv{{\fontencoding{OT1}\selectfont \skewstack{g}{\semiv{u}}}} \DeclareRobustCommand\qusv{{\fontencoding{OT1}\selectfont \skewstack{q}{\semiv{u}}}} \DeclareRobustCommand\qu{{\fontencoding{OT1}\selectfont \skewstack{q}{u}}} % \end{macrocode} %\end{macro} %\end{macro} %\end{macro} %\end{macro} %\end{macro} %\end{macro} % %\begin{macro}{\dz} % Without using |\skewstack| other symbols may be defined; here |\dz| is just an % example, where the kerning between `d' and `z' has been found by cut and try. With % other glyphs may be different kerning is necessary. % \begin{macrocode} \DeclareRobustCommand\dz{{\fontencoding{OT1}\selectfont d\kern-.33ex z}} % \end{macrocode} %\end{macro} % % Now we come to another set of commands like the ones needed to mark the syneresis % or the zeugma and other similar marks. %\begin{macro}{\Utie} % This first macro sets a ``smile'' symbol under a couple of letters. The glyph is % fine but is good only for two adjacent letters, therefore % it is necessary to have a stretchable symbol. % \begin{macrocode} \DeclareRobustCommand\Utie[1]{% \mbox{\vtop{\ialign{##\crcr \hfil#1\hfil\crcr \noalign{\kern.3ex\nointerlineskip}% \hfil$\smile$\hfil\crcr}}}} % \end{macrocode} %\end{macro} % %\begin{macro}{\siner} %\begin{macro}{\siniz} % This is why the |\siner| and |\siniz| synonymous commands have been defined; in % place of or in addition to the ``smile'' symbol; they contain a stretchable % filler |\upfill| that behaves almost as the stretchable horizontal brace that is % used in the definition of the \LaTeX\ commands |\underbrace| or |\overbrace|. % \begin{macrocode} \DeclareRobustCommand{\siner}[1]{% \mbox{\vtop{\ialign{##\crcr \hfil#1\hfil\crcr \noalign{\kern.6ex\nointerlineskip}% \upfill\crcr}}}} \let\siniz\siner % \end{macrocode} %\end{macro} %\end{macro} % %\begin{macro}{\upfill} % The |\upfill| is defined as a leader, the same way as the corresponding \LaTeX\ % stretchable horizontal brace. % \begin{macrocode} \def\upfill{$\m@th \scriptstyle\setbox\z@\hbox{$\scriptstyle\bracelu$}% \kern.16ex\bracelu\ifPDF\kern-.15ex\fi \leaders\vrule \@height\ht\z@ \@depth\z@\hfill \braceru\kern.16ex$} % \end{macrocode} %\end{macro} % %\begin{macro}{\downfill} % The |\downfill| arc is totally similar to the |\upfill| one, except for its % terminating elements that change the shape of the arc from ``up'' to ``down''. % \begin{macrocode} \def\downfill{$\m@th\scriptstyle\setbox\z@\hbox{$\scriptstyle\braceld$}% \kern.16ex\braceld\ifPDF\kern-.15ex\fi \leaders\vrule \@height\ht\z@ \@depth\z@\hfill \bracerd\kern.16ex$} % \end{macrocode} %\end{macro} % %\begin{macro}{\zeugma} % Similarly |\zeugma| puts a stretchable arc over its argument; it must take into % account the slant of the argument font so as to skew the placement of the arc. % \begin{macrocode} \newcommand*\zeugma[1]{{\vbox{\setbox\z@\hbox{#1}\dimen@=\ht\z@ \edef\@slant{\strip@pt\fontdimen1\font}% \dimen\tw@=\wd\z@ \dimen@=\@slant\dimen@\ifmetricsfont\dimen@=\z@ \advance\dimen\tw@-.5ex\fi \kern-.2ex\ialign{##\crcr \hbox to\z@{\ifmetricsfont\kern.25ex\fi\kern\dimen@ \hbox to\dimen\tw@{\hss\downfill\kern.2\dimen@\hss}\hss}\crcr \noalign{\ifmetricsfont\kern.6ex \else\kern.4ex\fi\nointerlineskip}% \hfil{#1}\hfil\crcr}}}% } % \end{macrocode} %\end{macro} % %\begin{macro}{\slzeugma} %\begin{macro}{\rszeugma} % Although the shape of oblique zeugma arcs cannot be changed depending on the width % and height of the zeugma argument, in certain circumstances the philologists want % to use oblique zeugma marks. This is why we defined a ``sloping zeugma arc'' % |\slzeugma|, and a ``rising zeugma arc'' |\rszeugma| that can be used with poor % results, if such arcs are superimposed over the ``wrong'' letters. There is % nothing automatic in the choice of the oblique arc and is totally on the % typesetter responsibility to use the correct command. These slanted zeugma signs % are possibly useful only for two letters since they are not stretchable. % \begin{macrocode} \newcommand*\slzeugma[1]{{\leavevmode \setbox\tw@\hbox{\metricsfont\char120}% \setbox\z@\hbox{#1}\dimen@.5\wd\z@\advance\dimen@-.5\wd\tw@ \edef\@slant{\strip@pt\fontdimen1\font}% \advance\dimen@\@slant\ht\z@ \hbox to\z@{\kern\dimen@\box\tw@\hss}\box\z@ }% } \newcommand*\rszeugma[1]{{\leavevmode \setbox\tw@\hbox{\metricsfont\char122}% \setbox\z@\hbox{#1}\dimen@.5\wd\z@\advance\dimen@-.5\wd\tw@ \edef\@slant{\strip@pt\fontdimen1\font}% \advance\dimen@\@slant\ht\z@ \hbox to\z@{\kern\dimen@\box\tw@\hss}\box\z@ }% } % \end{macrocode} %\end{macro} %\end{macro} % %\begin{macro}{\nexus} %\begin{macro}{\nesso} % Originally I had two different macros for marking a \emph{nexus}; one made use of a ``up stretchable turtle bracket'', and the user used a leader of Latin circumflex signs. Both were unsatisfactory; the latter was really ugly, but I kept the macro name as a synonym for compatibility with the past. The good looking marker is obtained from a mathematical |\widehat| sign by stretching it to the width of the string the marcher should mark; the new macro |\nexus| (that replaces the stretchable turtle bracket) relies on the facilities offered by the |\resizebox| of the package |graphicx|. % \begin{macrocode} \newcommand*{\nexus}[1]{{\setbox\tw@\hbox{#1\/}% \edef\slant@{\strip@pt\fontdimen1\font}% \@tempdima=\slant@\ht\tw@\advance\@tempdima.45ex \setbox4\hbox{\resizebox{\wd\tw@}{\height}{$\widehat{\phantom{aaa}}$}}% \setbox4\hbox{\smash{\lower1.35ex\hbox{\box4}}}% \vbox{\ialign{##\crcr% \kern\@tempdima\box4% \crcr \noalign{\kern.15ex\nointerlineskip}% \hfil{#1}\hfil\crcr}}}} \let\nesso\nexus % \end{macrocode} %\end{macro} %\end{macro} % % %\begin{macro}{\coronis} %\begin {macro}{\Coronis} %\begin {macro}{\paragr} % \begin {macro}{\dpar} % While setting poetry it is necessary to mark the end of paragraphs, which do not % necessarily coincide with the ends of stanzas. After the verse that concludes a % logical paragraph philologists insert a mark called ``coronis'' (synonymous of % paragraph, therefore the command |\paragr|) or a ``stronger'' mark called % ``Coronis'', which differs from the common ``coronis'' because it bears an % inverted semilunar sign on its left. Both marks are input by means of their % respective commands |\paragr| (preferred to |\coronis|) or |\Coronis| inserted % \emph{at the beginning of the paragraph terminating verse}. % The command |\dparagr| inserts a double coronis mark, which is sometimes required % in place of the ordinary single mark. % \begin{macrocode} \def\C@rule{\vrule\@height.45ex\@depth-.35ex\@width1.5em} \def\coronis@rule{\hbox to\z@{\hss\C@rule\hss}} \def\Coronis@rule{\hbox to\z@ {\hss\hbox to\z@{\hss$\scriptstyle)$\kern-1.5\p@}\C@rule\hss}} \DeclareRobustCommand\paragr{\raisebox{-1ex}[\z@][\z@]{\coronis@rule}} \let\coronis\paragr \DeclareRobustCommand\Coronis{\raisebox{-1ex}[\z@][\z@]{\Coronis@rule}} \DeclareRobustCommand{\dparagr}% {\raisebox{-1.3ex}[\z@][\z@]{\coronis@rule}% \raisebox{-1.6ex}[\z@][\z@]{\coronis@rule}} % \end{macrocode} %\end{macro} %\end{macro} %\end{macro} %\end{macro} % %\begin {macro}{\sinafia} %\begin {macro}{\crux} %\begin {macro}{\FinisCarmen} %\begin {macro}{\apici} %\begin {macro}{\positio} %\begin {macro}{\Int} %\begin {macro}{\star} %\begin {macro}{\dstar} %\begin {macro}{\tstar} %\begin {macro}{\responsio} % The next group of commands are intended to insert special symbols in the % philological text; just the command |\apici| requires an argument, a block of text % that shall be enclosed within straight vertical apices, irrespective of the font % slant. The command |\FinisCarmen| although very descriptive, is long to type, % therefore a shorter alias |\FinCar| has been defined. |\apex| was the initial name % given to the command, but on a second time it was changed to |\positio|, and the % latter should always be used in place of the former. For what concerns |\star| % which is a standard \LaTeX\ math command, the original definition is saved in the % service macro |\m@thst@r| and the command is redefined so as to perform as it % should both in text and in math mode. The symbol $\int$, on the contrary, was % redefined so as not to mix math with text, even if its rendering resorts to % mathematics. % \begin{macrocode} \DeclareRobustCommand*\sinafia{{\metricsfont s}} \DeclareRobustCommand*{\crux}{{\metricsfont\char'171}} \DeclareRobustCommand*{\FinisCarmen}{\ensuremath{\otimes}} \let\FinCar\FinisCarmen \DeclareRobustCommand*{\apici}[1]% {\posthinspace{\metricsfont\char96}\negthinspace#1% \posthinspace{\metricsfont\char39}\negthinspace} \DeclareRobustCommand*{\apex}% {\/\hskip.5ex\vrule\@height1.7ex\@depth-1ex\hskip.2ex} \let\positio\apex \DeclareRobustCommand*{\Int}{\ensuremath{\int}} \let\m@thst@r\star \DeclareRobustCommand*{\star}{\textormath{{{\upshape *}}}{\m@thst@r}} \DeclareRobustCommand*{\dstar}{{\upshape **}} \DeclareRobustCommand*{\tstar}{{\upshape ***}} \DeclareRobustCommand*{\responsio}{{\boldmath\ensuremath{\sim}}} % \end{macrocode} %\end{macro} %\end{macro} %\end{macro} %\end{macro} %\end{macro} %\end{macro} %\end{macro} %\end{macro} %\end{macro} %\end{macro} % %\begin{macro}{\thorn} %\begin{macro}{\Thorn} |\thorn| and |\Thorn| are the exact equivalents of |\th| % and |\Th| that are defined only for the T1 encoding. Therefore such encoding is % selected in an implicit way. % \begin{macrocode} \DeclareRobustCommand{\thorn}{{\fontencoding{T1}\selectfont\th}} \DeclareRobustCommand{\Thorn}{{\fontencoding{T1}\selectfont\TH}} % \end{macrocode} %\end{macro} %\end{macro} % % \subsection{Ancient Greek monetary unit symbols} %\begin{macro}{\dracma} %\begin {macro}{\hemiobelion} %\begin {macro}{\tetartemorion} %\begin {macro}{\stater} %\begin {macro}{\denarius} %\begin {macro}{\etos} % This set of symbols, taken from the metrics symbol font (which by this time is % evident does not contain only metrics symbols) represents the unit symbols of some % coins of ancient Greece, as they were found on many ``ostraka'' in several % archeological sites. % \begin{macrocode} \DeclareRobustCommand{\dracma}{{\metricsfont D}} \DeclareRobustCommand{\hemiobelion}{{\metricsfont A}} \DeclareRobustCommand{\tetartemorion}{{\metricsfont B}} \DeclareRobustCommand{\stater}{{\metricsfont C}} \DeclareRobustCommand{\denarius}{{\metricsfont E}} \DeclareRobustCommand{\etos}{{\metricsfont G}} % \end{macrocode} %\end{macro} %\end{macro} %\end{macro} %\end{macro} %\end{macro} %\end{macro} % % \subsection{Another set of philological symbols and macros} %\begin{macro}{\cut} %\begin{macro}{\dcutbar} %\begin{macro}{\bcutbar} %\begin{macro}{\gcutbar} % The following set of macros are all connected with the principal macro |\cut|, % which should position a horizontal tie or bar across a certain number of latin % letters, specifically `d', `b', and `g'; due to their different shapes, such bars % are of different length and located at different heights; if they are in italics % the bar position must change again. Therefore even if the user command |\cut| is % the same for all these letters, its action must change depending on different % circumstances. % It merely checks its argument (it must be \emph{one} letter and unpredictable % results are obtained if more that one token is passed as an argument to |\cut|) % and selects the proper bar. The specific bar commands |\dcutbar|, |\bcutbar|, and % |\gcutbar|, are defined in such a way as to cope only with the their initial % letter. % \begin{macrocode} \DeclareRobustCommand{\cut}[1]{% \ifx#1d\dcutbar\else \ifx#1b\bcutbar\else \ifx#1g\gcutbar \fi \fi \fi} % \def\dcutbar{{\edef\slant@{\strip@pt\fontdimen1\font}% d\dimen@1.2ex\kern\slant@\dimen@ \llap{\vrule\@height1.3ex\@depth-\dimen@ \ifdim\slant@\p@>\z@\@width.35em\else\@width.4em\fi\kern.03em}}} \def\bcutbar{{\edef\slant@{\strip@pt\fontdimen1\font}% \rlap{\dimen@1.2ex\kern\slant@\dimen@ \ifdim\slant@\p@=\z@\kern.03em\fi \vrule\@height1.3ex\@depth-\dimen@ \ifdim\slant@\p@>\z@\@width.3em\else\@width.4em\fi}b}} \def\gcutbar{{\edef\slant@{\strip@pt\fontdimen1\font}% \ifdim\slant@\p@>\z@ g\kern-.55ex\dimen@.2ex\kern-\slant@\dimen@ \vrule\@height-.1ex\@depth\dimen@\@width.6ex \else \dimen@.2ex\kern\slant@\dimen@\vrule\@height.3ex\@depth-\dimen@ \@width.6ex\kern-.55ex\relax g \fi}} % \end{macrocode} %\end{macro} %\end{macro} %\end{macro} %\end{macro} % %\begin{macro}{\OSN} % The next macro is just a shortcut instead of using |\oldstylenums|. % \begin{macrocode} \let\OSN\oldstylenums % \end{macrocode} %\end{macro} % %\begin{macro}{\splus} %\begin{macro}{\stimes} %\begin{macro}{\kclick} % The next three macros are used in glottology; the first two ones are used to % mark special pronunciations of the sibilant, while the last one is used to mark % a special pronunciation of the guttural that produces a ``click''. %\begin{macrocode} \newcommand\splus{\leavevmode{% \edef\slant@{\strip@pt\fontdimen1\font}% \setbox\z@\hbox{s}% \dimen@=\wd\z@ \setbox\tw@\hbox{$\scriptscriptstyle+$}% \advance\dimen@.35\ht\tw@ \raisebox{\dimen@}[\z@][\z@]{% \makebox[\z@][l]{\kern.5\wd\z@ \kern\slant@\dimen@\kern-.5\wd\tw@\box\tw@}}% \box\z@}}% \newcommand\stimes{\leavevmode{% \edef\slant@{\strip@pt\fontdimen1\font}% \setbox\z@\hbox{s}% \dimen@=\wd\z@ \setbox\tw@\hbox{$\scriptscriptstyle\times$}% \advance\dimen@.2\ht\tw@ \raisebox{\dimen@}[\z@][\z@]{% \makebox[\z@][l]{\kern.5\wd\z@ \kern\slant@\dimen@\kern-.5\wd\tw@\box\tw@}}% \box\z@}}% \newcommand\kclick{\leavevmode{% \edef\slant@{\strip@pt\fontdimen1\font}% \setbox\z@\hbox{k}% \setbox\tw@\hbox{\fontencoding\GRencoding@name\selectfont\s{v}}% \dimen@\wd\z@ \ifdim\slant@\p@=\z@ \advance\dimen@-.1\wd\z@\else\advance\dimen@\wd\tw@ \fi k\makebox[\z@][r]{\unhcopy\tw@\kern.5\dimen@}% }}% % \end{macrocode} %\end{macro} %\end{macro} %\end{macro} % % \subsection{Poetry environments and macros} %\begin {macro}{\verso} %\begin{environment}{versi} % Here we start with verse environments; we already explained that we defined three % new verse environments that typeset poetry in ``in-line'' verses, % ``numbered by five'' verses, and ``numbered by five and subnumbered'' verses. % For the environment |versi| we first need a counter and a little macro for % generating the short bar that has to receive the verse number as a ``limits'' % superscript. % \begin{macrocode} \newcounter{verso}\setcounter{verso}{0} \newcommand{\smallvert}{\vrule\@height.6ex\@depth.4ex} % \end{macrocode} % Next we define the macro |\verso| that sets the small bar with the verse number on % top. Since the initial numbering might be different from~1, |\verso| accepts an % optional argument, which is intended to be the initial counter value. Since % |\verso| steps up the counter a different action must be taken if the optional % argument is present; in order to be able to reference such verse by means of the % |\label|--|\ref| cross reference mechanism, this stepping up must be done by means % of |\refstepcounter|; therefore we have to leave |\refstepcounter| outside the % conditional code, and step down the counter by one unit only in case the initial % value is specified. % \begin{macrocode} \DeclareRobustCommand\verso[1][]{% \def\@tempA{#1}\ifx\@tempA\empty \else \setcounter{verso}{#1}\addtocounter{verso}{\m@ne}% \fi \refstepcounter{verso}% \@killglue\space \ensuremath{\mathop{\smallvert}\limits^{\scriptscriptstyle\theverso}}% \space\ignorespaces} % \end{macrocode} % Now that the verse separation macro is ready we can define the environment; the % required opening statement argument represents a short text whose width is taken % as a measure for indentation, so that verses are typeset with a left margin that % leaves out this short text. Substantially this environment is a \texttt{list} one, % and the left margin variable width is totally similar to the one used in % |thebibiography| environment. Also the |\makelabel| command has been modified % accordingly. % \begin{macrocode} \newenvironment{versi}[1]{% \def\makelabel##1{##1} \setbox\z@\hbox{#1}% \list{}{\labelwidth\wd\z@\leftmargin\labelwidth \advance\leftmargin\labelsep}% \item[\box\z@] }{% \endlist } \let\versus\versi \let\endversus\endversi % \end{macrocode} %\end{environment} %\end{macro} % %\begin{environment}{Versi} % The second environment |Versi| accepts an optional starting number in the opening, % statement, whose default value is~1: verses are composed as in the standard % \LaTeX\ |verse| environment (with one minor difference) except they are numbered % in the left margin with a progression of five; only verse numbers that are integer % multiples of five are displayed. The minor difference is that stanzas cannot be % marked with a blank line in the input |.tex| file, as it is customary with % the standard environment, but if a visual mark is desired, such as extra vertical % space, it is necessary to resort to the optional spacing parameter that can be % specified to the |\\| command. This environment uses the same verse counting % counter, defined for use with the |versi| environment. % %\begin{macro}{\BreakVersotrue} %\begin{macro}{\BreakVersofalse} % For specific purposes it is necessary to have a boolean variable for allowing or % prohibiting verses to split up at the end of line; the default is not % to split. % \begin{macrocode} \newif\ifBreakVersi \BreakVersifalse \newenvironment{Versi}[1][1]{% \setcounter{verso}{#1}% % \end{macrocode} %\end{macro} %\end{macro} % An internal macro |\writ@verso| does not actually write out the complete, possibly % numbered verse, but provides for checking that the verse counter contains a % multiple of~5, and to write it out using old stile numbers; in case the number is % not an integer multiple of~5 the number is written out as the |\empty| macro. % \begin{macrocode} \def\writ@verso{% \count255=\value{verso}\divide\count255by5\relax \multiply\count255by5\relax \advance\count255-\value{verso}% \ifnum\count255=\z@ {\fontseries{m}\small\expandafter\oldstylenums\expandafter{\the\c@verso}}% \else \empty \fi}% % \end{macrocode} % Since the |\\| command should provide the same functionality as the regular % \LaTeX\ command, while in this environment it should provide other % functionalities, such as triggering the display of the verse number. It is % necessary to define an intermediate command |\v@rscr|, that examines the possible % optional arguments, such as the optional star or the brackets enclosing vertical % spacing % \begin{macrocode} \def\\{\@ifstar{\v@rscr{\@M}}{\v@rscr{\z@}}}% \def\v@rscr##1{\@ifnextchar[{\wr@teverse{##1}}% {\wr@teverse{##1}[\z@]}}% % \end{macrocode} % Finally the |\wr@teverse| macro does the actual typesetting of the verse. Notice % that the environment opening statement and every succeeding previous verse starts % an horizontal box where the contents of the current verse is stored. Therefore the % first thing to do is to close the box with the |\egroup| command, then a line of % text is output that contains a possibly empty box or the verse number and the % command for stepping up the verse counter, followed by the verse box number~0 and % an end of paragraph; in this way the |\\| operates always in vertical mode, % contrary to what happens in the |verse| standard \LaTeX\ environment. Even in this % environment the actual typesetting is done within a |list| environment, whose % parameters are set differently from what they are in the |verse| environment. % Notice in any case that the command |\wr@teverse| reopens the~0 box, so on the % last verse, upon closing the environment, it is necessary to remember to close % such box, whose contents is irrelevant and can be thrown away. % % I have experienced some problems in typesetting verses in two-column format; the % column width might be too short for setting up verses even if verses are not that % long, because in the left margin there must be room for the verse numbering; for % homogeneity the spacing must conform also with the following environment % \texttt{VERSI} that has a secondary verse numbering, therefore it can't be too % small. The result is that there might be a test for controlling the two-column % format, but I think that it is more useful for the typesetter to be able to switch % on and off the possibility of breaking long verses on more lines. % On two-column format in any case it is better to leave the right margin to % coincide with the column right margin. % \begin{macrocode} \def\wr@teverse##1[##2]{\egroup \makebox[3em][r]{% \writ@verso\refstepcounter{verso}\kern1.5em} \ifBreakVersi \begingroup\raggedright \hyphenpenalty \@M \unhbox\z@\par \endgroup \else \rlap{\box\z@}\par \fi \penalty##1\vskip##2\relax \setbox\z@\hbox\bgroup\ignorespaces}% \list{}{\itemsep\z@\parsep\z@ \if@twocolumn \itemindent -5.3em% \listparindent\itemindent \rightmargin\z@ \advance\leftmargin 3.3em \else \itemindent -1.5em% \listparindent\itemindent \rightmargin \leftmargin \advance\leftmargin 1.5em \fi }% \item\leavevmode\setbox\z@\hbox\bgroup\ignorespaces }{% % \end{macrocode} % Upon closing it is necessary to activate the writing out of the last verse that is % still in the~0 box, but since this box is immediately reopened, it is necessary to % close it again before exiting the environment. % \begin{macrocode} \\% \egroup \endlist } \let\Versus\Versi \let\endVersus\endVersi % \end{macrocode} %\end{environment} % %\begin{environment}{VERSI} The third environment |VERSI| set verses in the % traditional way, but numbers them with two different enumerations; the principal % one is by multiples of five, while the secondary one counts by units, and may be % turned on and off, or reset at will. We therefore need another counter for the % secondary enumeration and commands for turning it on and off and for resetting the % counter. We need also a new length and a new boolean variable in order to manage % the secondary enumeration. % The new length represents an indentation of those verses that do no have the % secondary enumeration, while secondary enumerated verses are not indented. For % \texttt{VERSI} there is the same possibility of turning on and off the possibility % of breaking verses at the end of line as it happens for the environment % \texttt{Versi}. % \begin {macro}{\SubVerso} % \begin {macro}{\NoSubVerso} % Macro |\NoSubVerso| turns off the secondary enumeration; macro |\SubVerso| turns % on the secondary enumeration, but it accepts an optional argument for resetting % the secondary counter; the default value is~0; if no optional argument is % specified, and therefore if the optional argument has its default value~0, no % resetting is performed and the enumeration keeps going from the last contents of % the secondary counter; if the first use of |\SubVerso| does not contain the % optional argument, the secondary enumeration keeps going from the old contents of % the secondary counter which is unpredictable, depending upon the previous % occurrences of the environment |VERSI|. The typesetter, therefore, must remember % to specify the optional argument to |\SubVerso| the first time he uses it in this % environment. % \begin{macrocode} \newcounter{subverso} \setcounter{subverso}{0} \newif\ifSubVerso \newlength{\versoskip} \newcommand*\NoSubVerso{\global\SubVersofalse \global\versoskip1.3em\ignorespaces} \newcommand*\SubVerso[1][0]{\global\SubVersotrue \ifnum#1=0\else \setcounter{subverso}{#1}% \global\protected@edef\@currentlabel{\the\c@subverso}% \fi \global\versoskip.3em\ignorespaces} % \end{macrocode} %\end{macro} %\end{macro} % The opening environment statement accepts an optional argument (default equals~1) % which represents the primary enumeration starting number: % \begin{macrocode} \newenvironment{VERSI}[1][1]{% \setcounter{verso}{#1}% % \end{macrocode} % We need two macros |\writ@verso| and |\writ@subverso|, that typeset the primary % and secondary enumeration; the first one is similar to the one used in the |Versi| % environment, while the second one has no special features except the conditional % construct needed to check if the secondary enumeration has to be printed out. % \begin{macrocode} \def\writ@verso{% \count255=\value{verso}\divide\count255by5\relax \multiply\count255by5\relax \advance\count255-\value{verso}% \ifnum\count255=0\relax {\fontseries{m}\small\expandafter\oldstylenums\expandafter{\the\c@verso}}% \else \empty \fi}% \NoSubVerso \def\writ@subverso{% \ifSubVerso {\fontseries{m}\scriptsize\expandafter\oldstylenums \expandafter{\the\c@subverso}}% \fi}% % \end{macrocode} % Similarly to the previous environment, the |\\| command must be redefined % so as to perform more or less as the standard one, while doing all the necessary % actions needed in this environment. It must check the presence of the optional % star and of the optional vertical skip and it has to pass control to a service % macro |\v@rscr| that does the actual job; actually it passes control to a third % macro |\writ@verse| that effectively outputs the current verse. % \begin{macrocode} \def\\{\@ifstar{\v@rscr{\@M}}{\v@rscr{\z@}}}% \def\v@rscr##1{\@ifnextchar[{\writ@verse{##1}}% {\writ@verse{##1}[\z@]}}% \def\writ@verse##1[##2]{\egroup \makebox[1.5em][r]{\writ@verso\refstepcounter{verso}}% \makebox[1.5em][r]{\writ@subverso\refstepcounter{subverso}}% \kern1.5ex\hskip\versoskip \ifBreakVersi \begingroup \hyphenpenalty \@M \unhbox\z@\par \endgroup \else \rlap{\box\z@}\par \fi \penalty##1\vskip##2\relax \setbox\z@\hbox\bgroup\ignorespaces}% % \end{macrocode} % For the remaining part, the environment is a normal |list| environment with % specific initial parameters. % \begin{macrocode} \list{}{\parsep\z@\itemsep\z@ \if@twocolumn \itemindent -5.3em% \listparindent\itemindent \rightmargin\z@ \advance\leftmargin 3.3em \else \itemindent -1.5em% \listparindent\itemindent \rightmargin \leftmargin \advance\leftmargin 1.5em \fi }% \item\leavevmode\setbox\z@\hbox\bgroup\ignorespaces }{% % \end{macrocode} % The closing statement must output the last verse, which is still contained in % box~0; since box~0 is automatically reopened, it must be closed again and its % contents, of no significance now, can be lost upon closing the environment group. % \begin{macrocode} \\% \egroup\endlist} \let\VERSUS\VERSI \let\endVERSUS\endVERSUS % \end{macrocode} %\end{environment} % % \subsection{Metrics symbols, macros and environmnets} % Now we start defining many macros concerned with metrics; the metric symbol font % has been developed mainly for this purpose. We start defining some macros for % inputting specific symbols; many such macros have their own aliases in Latin. % %\begin{macro}{\lunga} %\begin{macro}{\longa} %\begin{macro}{\breve} %\begin{macro}{\brevis} %\begin{macro}{\bbreve} %\begin{macro}{\bbrevis} %\begin{macro}{\barbreve} %\begin{macro}{\barbrevis} %\begin{macro}{\barbbrev} %\begin{macro}{\barbbrevis} %\begin{macro}{\ubarbreve} %\begin{macro}{\ubarbrevis} %\begin{macro}{\ubarbbreve} %\begin{macro}{\ubarbbrevis} %\begin{macro}{\ubarsbreve} %\begin{macro}{\ubarsbrevis} %\begin{macro}{\ubrevelunga} %\begin{macro}{\ubrevislonga} % The following definitions are straightforward; a small comment on |\breve|: since % it is also a math command in standard \LaTeX, its meaning is saved in a service % macro |\br@ve| and the |\breve| macro is redefined taking into account whether the % typesetting is being done in text or in math mode. The unusual letters that appear % in the definitions of the various metric symbols have no mysterious meaning; they % might have been specified by |\char|\meta{number}, but it seemed shorter to % specify the corresponding letters that would occupy the same slots in literal % fonts. % \begin{macrocode} \DeclareRobustCommand\lunga{{\metricsfont l}} \let\longa\lunga \let\br@ve\breve \DeclareRobustCommand\breve{\textormath{{{\metricsfont b}}}{\br@ve}} \let\brevis\breve \DeclareRobustCommand\bbreve{{\metricsfont c}} \let\bbrevis\bbreve \DeclareRobustCommand\barbreve{{\metricsfont i}} \let\barbrevis\barbreve \DeclareRobustCommand\barbbreve{{\metricsfont j}} \let\barbbrevis\barbbreve \DeclareRobustCommand\ubarbreve{{\metricsfont d}} \let\ubarbrevis\ubarbreve \DeclareRobustCommand\ubarbbreve{{\metricsfont e}} \let\ubarbbrevis\ubarbbreve \DeclareRobustCommand\ubarsbreve{{\metricsfont f}} \let\ubarsbrevis\ubarsbreve \DeclareRobustCommand{\ubrevelunga}{{\metricsfont\char107}} \let\ubrevislonga\ubrevelunga % \end{macrocode} %\end{macro} %\end{macro} %\end{macro} %\end{macro} %\end{macro} %\end{macro} %\end{macro} %\end{macro} %\end{macro} %\end{macro} %\end{macro} %\end{macro} %\end{macro} %\end{macro} %\end{macro} %\end{macro} %\end{macro} %\end{macro} % %\begin {macro}{\corona} %\begin {macro}{\ElemInd} %\begin {macro}{\coronainv} %\begin {macro}{\catal} %\begin {macro}{\ipercatal} %\begin {macro}{\hiatus} %\begin {macro}{\Hiatus} %\begin {macro}{\X} %\begin {macro}{\anceps} %\begin {macro}{\banceps} %\begin {macro}{\ancepsdbrevis} %\begin {macro}{\aeolicbii} %\begin {macro}{\aeolicbiii} %\begin {macro}{\aeolicbiv} % Similarly the following symbols have straightforward definitions. Only |\hiatus| % and |\Hiatus| require a small explanation; |\hiatus| inserts a small capital `H' % in superscript position; in a first moment it was chosen the solution of designing % a specific sans serif glyph in superscript position directly in the metric symbol % font (actually this symbol is still part of the font), but while testing it, Paolo % Ciacchi observed that a regular `H' with serifs was better looking than the sans % serif counterpart. Therefore the definition was changed in order to use the % current font upright shape; by specifying `H', it is irrelevant if the current one % is a Latin font, and the letter is a capital 'h', or if the current one is a Greek % font and the letter is a capital `eta'. |\Hiatus| displays the same symbol in a % zero width box so that it does not occupy any horizontal space; it is useful while % writing down complicated metric sequences. Macro|\X| may be considered, thanks to % its shape, a mnemonic shortcut in place of the full name |\anceps|. % \begin{macrocode} \DeclareRobustCommand\corona{{\metricsfont\char20}} \let\ElemInd\corona \DeclareRobustCommand\coronainv{{\metricsfont\char21}} \DeclareRobustCommand\catal{{\metricsfont g}} \DeclareRobustCommand\ipercatal{{\metricsfont h}} \DeclareRobustCommand\hiatus{\textsuperscript{\upshape H}} \DeclareRobustCommand\Hiatus{\makebox[\z@]{\hiatus}} \DeclareRobustCommand\X{{\metricsfont X}} \let\anceps\X \DeclareRobustCommand\banceps{{\metricsfont Y}} \DeclareRobustCommand\ancepsdbrevis{{\metricsfont Z}} \DeclareRobustCommand{\aeolicbii}{{\metricsfont I}} \DeclareRobustCommand{\aeolicbiii}{{\metricsfont J}} \DeclareRobustCommand{\aeolicbiv}{{\metricsfont K}} % \end{macrocode} %\end{macro} %\end{macro} %\end{macro} %\end{macro} %\end{macro} %\end{macro} %\end{macro} %\end{macro} %\end{macro} %\end{macro} %\end{macro} %\end{macro} %\end{macro} %\end{macro} % %\begin{macro}{\stripsl@sh} %\begin{macro}{\2} %\begin{macro}{\3} %\begin{macro}{\4} % Here we prepare for the definition of a very useful macro, |\newmetrics|, that % should ease quite a lot writing complicated and repetitive metric sequences. % We shall define |\newmetrics| by means of the internal \LaTeX\ macro |\@namedef| % which accepts a macro name containing any character, provided this name does not % contain the initial back slash (if it does this back slash becomes part of the % macro name; see the \TeX{}book where there is an example for the definition of % |\\TeX|). Therefore we need a service macro |\stripsl@sh| that strips the first % token from the control sequence, so that the na\"if user does not have to treat % the new metrics control sequence differently from the control sequences it uses % for example with |\newcommand|. Next we define three numeric control sequences % that should be followed by the rest of the macro name. % The na\"if user can then type in something like \verb*+\2iamb + in order to % activate a macro whose name is formed by the tokens |2iamb|, which is normally % impossible in \LaTeX. Notice, though, the compulsory space after the macro name. % \begin{macrocode} \newif\ifmetricsfont\metricsfontfalse \def\stripsl@sh#1{\expandafter\@gobble\string#1} \def\2#1 {\csname2#1\endcsname} \def\3#1 {\csname3#1\endcsname} \def\4#1 {\csname4#1\endcsname} % \end{macrocode} %\end{macro} %\end{macro} %\end{macro} %\end{macro} %\begin {macro}{\newmetrics} % Here is the user macro |\newmetrics|, to be used just as |\newcommand|, except it % accepts a macro name starting with one of the digits `2', `3', or `4', and sets % the suitable boolean variable to true so that in a long metric sequence the metric % font might be selected just once. % \begin{macrocode} \newcommand\newmetrics[2]{% \expandafter\@namedef\expandafter{\stripsl@sh#1}% {{\metricsfonttrue#2}}} % \end{macrocode} %\end{macro} % %\begin {macro}{\iam} %\begin {macro}{\chor} %\begin {macro}{\enopl} %\begin {macro}{\4MACRO} %\begin {macro}{\aeolchorsor} %\begin {macro}{\hexam} %\begin {macro}{\pentam} %\begin {macro}{\2tr} % Here some common metric sequences are defined; some define single measures, such % as the `iambus' or the `choriambus', while some define complete verses such as the % `hexameter' or the `pentameter'. % \begin{macrocode} \newmetrics\iam{\barbreve\lunga\breve\lunga} \newmetrics\chor{\lunga\breve\breve\lunga} \newmetrics\enopl{\breve\lunga\breve\breve\lunga\breve\breve\lunga} \newmetrics{\4MACRO}{\lunga\lunga\lunga\lunga} \newmetrics{\aeolchorsor}{\lunga\zeugma{\breve\breve}\breve \breve\zeugma{\breve\breve}} \newmetrics{\hexam}{\lunga\breve\breve\lunga\breve\breve \lunga\breve\breve\lunga\breve\breve\lunga\breve\breve \lunga\lunga} \newmetrics{\pentam}{\lunga\barbbreve\lunga\barbbreve\lunga\dBar \lunga\breve\breve\lunga\breve\breve\lunga} \newmetrics{\2tr}{\lunga\breve\lunga\X\ \lunga\breve\lunga\X\ } % \end{macrocode} % As it may be seen, the definition of such metric sequences may contain almost % anything; here |\zeugma| was used as well as \verb*+\ +, but almost every % macro defined in the previous parts may be freely used. %\end{macro} %\end{macro} %\end{macro} %\end{macro} %\end{macro} %\end{macro} %\end{macro} %\end{macro} % %\begin{macro}{\metricstack} % |\metricstack| is a command similar to |\shortstack| used to stack something over % something else; specifically the second argument over the third one; it was % specifically designed for use while typesetting metric sequences, but actually % there is nothing that forbids to use it with any base character (typeset in text % LR mode) and any superscript character belonging to a math alphabet (which is % being set in script--script style, not in script style, as it happens with % |\shortstack|. % \begin{macrocode} \DeclareRobustCommand*{\metricstack}[2]% {$\mathord{\mathop{\hbox{#1\rule{\z@}{1ex}}}% \limits^{\scriptscriptstyle\relax#2\relax}}$} % \end{macrocode} %\end{macro} % %\begin{macro}{\svert} % |\svert| is a short vertical rule that may be used, for example, with % |\metricstack| for putting a small number over a dividing vertical bar in metric % sequences. % \begin{macrocode} \newcommand*{\svert}{\vrule\@height.8ex\@depth.2ex\relax} % \end{macrocode} %\end{macro} % %\begin{macro}{\textoverline} % \LaTeX\ has macro |\underline| that can be used in both text and math mode; there % is nothing similar for overlining, therefore we defined a new command for this % task. % \begin{macrocode} \DeclareRobustCommand*{\textoverline}[1]{% \leavevmode\vbox{\setbox\z@\hbox{#1} \ialign{##\crcr \hbox to\wd\z@{\hrulefill}\crcr \noalign{\kern.4ex\nointerlineskip}% \hfil\box\z@\hfil\crcr}}} % \end{macrocode} %\end{macro} % %\begin{macro}{\verseskip} %\begin {environment}{bracedmetrics} % The environment |bracedmetrics| is used primarily for setting some metric % sequences one atop the other, with a certain alignment and grouped together with a % right brace. We need therefore a length name |\br@cedmetrics| for measuring the % width of this large metrics sequence stack; we need a command |\verseskip| for % inserting a blank space before, after or in the middle of a metric sequence, that % more or less is as wide as an integer number of metric symbols, and, last but not % least, the environment itself for typesetting this large object containing the % said metric sequences; see the documentation file \texttt{teubner-doc.pdf} for % examining some examples. % \begin{macrocode} \newlength{\br@cedmetrics} \newcommand*{\verseskip}[1]{{% \setbox\z@\hbox{\longa}\dimen@\wd\z@\leavevmode\hbox to#1\dimen@{}}} \newenvironment{bracedmetrics}[1]{\def\Hfill{\leavevmode\hfill}% \settowidth{\br@cedmetrics}{#1}% \ifvmode\vskip1ex\fi $\displaystyle\left.% \vcenter\bgroup\hsize\br@cedmetrics\parindent\z@\parskip\z@ }{\egroup\right\}$} % \end{macrocode} %\end{environment} %\end{macro} % % \subsection{Debugging commands} %\begin{macro}{\TRON} %\begin{macro}{\GTRON} %\begin{macro}{\TROF} %\begin{macro}{\GTROF} %\begin{macro}{\treceon} %\begin{macro}{\traceoff} % Here there are some macros for turning on and off the tracing facilities of \TeX, % that turn out to be useful while debugging; they are accessible also to the end % user. Global settings must be turned on and off globally; local settings % die out by themselves when a group is closed, but it is a good habit to explicitly % turn them out regardless of groups. Attention that when the tracing facilities are % on and a page ship out takes place, the |.log| file receives a lot of material, % and this file gets very large. In order to avoid logging too much information the % |trace| package is loaded; this package give access to the macros |\traceon| and % |\traceoff| that log a lot of information, except the redundant one, specifically % all the macros executed during any font change. Users don't realize the amount of % processing done behind the scenes when with the New Font Selection Scheme (NFSS) a % font change takes place; luckily enough modern processors are quite fast so that % the compilation CPU time does not become too heavy. But if the \TeX\ processing is % logged, this amount of work implies thousands of lines of almost meaningless % information when the purpose of logging depends on errors that are difficult to % spot; Font changes are almost exempt from errors, so the processing of the inner % workings need not be logged down. % % If the user needs to trace something in order to spot errors, s/he is invited to % use the commands |\traceon| and |\traceoff|; commands |\TRON| and |\TROF| do log % much more material, in particular font changes, but at least they action may be % confined within groups or environments; |\GTRON| and |\GTROF| are global settings % and can't be confined within groups or environments; sometimes they are necessary, % but it's important to turn off global tracing as soon as possible. % \begin{macrocode} \RequirePackage{trace} \def\GTRON{\global\tracingcommands=\tw@ \global\tracingmacros=\tw@} \def\GTROF{\global\tracingcommands=\z@ \global\tracingmacros=\z@} \def\TRON{\tracingcommands=\tw@ \tracingmacros=\tw@} \def\TROF{\tracingcommands=\z@ \tracingmacros=\z@} % \end{macrocode} %\end{macro} %\end{macro} %\end{macro} %\end{macro} %\end{macro} %\end{macro} % % \subsection{Classical Greek numerals} % When typesetting Greek it may occur to specify numbers written out as Milesian % numerals; the \texttt{greek} option to the \babel\ package defines a couple of % macros for transforming explicit arabic numerals or counter contents as Milesian % numerals. Since this package offers more possibilities in the choice of those % ``non alphabetic'' characters used in the Milesian notation, such macros have to % be redefined. On the occasion we changed some little internal details so as to make such macros a little faster and more robust. %\begin{macro}{\Greeknumeral} %\begin{macro}{\greeknumeral} %\begin{macro}{\@ifStar} %\begin{macro}{\grtoday} % Both |\gereeknumeral| and |\Greeknumeral|, the latter producing upper case Greek % numerals, while the former produces lower case ones, resort to a service macro % |\gr@@numeral|. But the new definition accepts the starred version; without the % star the digit value~6 is represented with a ``stigma'', while with the star that % value is represented with a lowered ``digamma''. The upper case version requires % intermediate macros before using |\MakeUppercase| on the result in order to % convert lower to upper case Milesian value symbols. This means that |\gr@@numeral| % may work only with lower case symbols. % It turned out that the normal redefinition command |\renewcommand| produced % fragile commands that broke out when used as arguments of other commands, % specifically the Greek date was broken when it was passed as the argument to the % |\date| command of the class \textsf{memoir}; therefore I decided to redefine the % |\@ifstar| macro into another |\@ifStar| one so as not to fiddle with \LaTeX\ % kernel commands. I defined also the lowercase version of the |\grtoday| date, % since the \babel\ package provides only the |\today| command with no control over % the use of which type of numerals; |\grtoday| uses the lowercase Milesian numerals % through the redefined |\greeknumeral| macro. % \begin{macrocode} \def\@ifStar#1#2{\def\@tempA{#1}\def\@tempB{#2}\futurelet\@tempC\@testStar} \def\@testStar{\ifx\@tempC*\bbl@afterelse\expandafter\@tempA\@gobble\else \bbl@afterfi\@tempB\fi} \DeclareRobustCommand*{\Greeknumeral}{% \let\n@vanta\Coppa\let\n@vecento\Sampi \@ifStar{\Gr@@kn@meral}{\Gr@@knum@ral}} \DeclareRobustCommand*{\greeknumeral}{% \let\n@vanta\varkoppa\let\n@vecento\sampi \@ifStar{\let\s@i\stigma\gr@@numeral}{\let\s@i\fLow\gr@@numeral}} \def\Gr@@kn@meral#1{\let\s@i\Stigma \expandafter\MakeUppercase\expandafter{\gr@@numeral{#1}}} \def\Gr@@knum@ral#1{\let\s@i\Digamma \expandafter\MakeUppercase\expandafter{\gr@@numeral{#1}}} \def\grtoday{{\expandafter\greeknumeral\expandafter{\the\day}}\space \gr@c@month\space{\expandafter\greeknumeral\expandafter{\the\year}}} % \end{macrocode} %\end{macro} %\end{macro} %\end{macro} %\end{macro} %\begin{macro}{\gr@@numeral} % |\gr@@numeral| must do most of the processing; it must check that the argument is % within the allowable range $1\sim999\,999$ and issue suitable warnings if not. On % the other side, if the number is within the correct range, it must check in which % decade it falls and must call other macros so as to produce the correct decimal % digit~$\leftrightarrow$ Milesian symbol. Six such macros are needed because the % allowable range contains at maximum six decimal places. Apparently Milesian % symbology allows to go beyond one million, but Apostolos Syropoulos, who % originally wrote the code thought (correctly) that Milesian numbers would not be % used for ``acrobatic performances'' but possibly for writing the Greek date with % the AD year; six decimal places are more than enough for this purpose. % |\gr@ill@value| was not redefined from Apostolos Syropoulos' \babel\ definition; % it simply issues a warning message about an argument out of range. The presence of % the primitive command |number| in these macros is for two purposes: (a) transforms % a counter contents into a sequence of digits tokens, and (b) if the argument is % already a digit string, it removes any leading zeros. No braces are present % because this string is examined sequentially one digit at a time from the leading % position to the least significant position; of course this means that the decimal % zero is treated correctly even if Milesian symbols do not have the equivalent of a % zero. % \begin{macrocode} \def\gr@@numeral#1{% \ifnum#1<\@ne\space\gr@ill@value{#1}% \else \ifnum#1<10\relax\expandafter\gr@num@i\number#1% \else \ifnum#1<100\relax\expandafter\gr@num@ii\number#1% \else \ifnum#1<\@m\relax\expandafter\gr@num@iii\number#1% \else \ifnum#1<\@M\relax\expandafter\gr@num@iv\number#1% \else \ifnum#1<100000\relax\expandafter\gr@num@v\number#1% \else \ifnum#1<1000000\relax\expandafter\gr@num@vi\number#1% \else \space\gr@ill@value{#1}% \fi \fi \fi \fi \fi \fi \fi } % \end{macrocode} %\end{macro} %\begin{macro}{\gr@num@i} %\begin{macro}{\gr@num@ii} %\begin{macro}{\gr@num@iii} %\begin{macro}{\gr@num@iv} %\begin{macro}{\gr@num@v} %\begin{macro}{\gr@num@vi} % The next six macros transform single decimal digits into Milesian symbols. The % argument to each macro is a single decimal digit; their positional value is % determined by the calling a macro that invokes a different transformation routine % for every position. % To the right of the least significant position there must be the symbol % ``anwtonos'', similar to an apostrophe, while to the left of each most significant % symbol whose value is greater than 999 there must be a ``katwtonos'' symbol, % similar to a lowered and inverted apostrophe. Zeros are examined in all macros, % except the one for ``units'', because their value cannot be printed but there % still is the possibility that there are no more digits higher than zero, so that % the anwtonos must be set. % Macros |\n@vanta| and |\n@vecento| are set by the calling macros so as to be the % correct lower or upper case `qoppa' or sampi' respectively. % \begin{macrocode} \def\gr@num@i#1{% \ifcase#1\or a\or b\or g\or d\or e% \or \s@i\or z\or h\or j\fi \ifnum#1=\z@\else\anw@true\fi\anw@print} \def\gr@num@ii#1{% \ifcase#1\or i\or k\or l\or m\or n% \or x\or o\or p\or \n@vanta\fi \ifnum#1=\z@\else\anw@true\fi\gr@num@i} \def\gr@num@iii#1{% \ifcase#1\or r\or s\or t\or u\or f% \or q\or y\or w\or \n@vecento\fi \ifnum#1=\z@\anw@false\else\anw@true\fi\gr@num@ii} \def\gr@num@iv#1{% \ifnum#1=\z@\else\katwtonos\fi \ifcase#1\or a\or b\or g\or d\or e% \or \s@i\or z\or h\or j\fi \gr@num@iii} \def\gr@num@v#1{% \ifnum#1=\z@\else\katwtonos\fi \ifcase#1\or i\or k\or l\or m\or n% \or x\or o\or p\or \n@vanta\fi \gr@num@iv} \def\gr@num@vi#1{% \katwtonos \ifcase#1\or r\or s\or t\or u\or f% \or q\or y\or w\or \n@vecento\fi \gr@num@v} % \end{macrocode} %\end{macro} %\end{macro} %\end{macro} %\end{macro} %\end{macro} %\end{macro} % %\subsection{Attic numerals} % It's true that Apostolos Siropoulos wrote also the |athnum.sty| extension package % in order to typeset integer numbers with the Athenian or Attic notation; this % representation of integer strictly positive integers was similar in a way to the % Roman notation, based on a biquinalry representation of decimal digits (taking % into account that there was not a symbol for zero) so as the Romans had the % symbols for 1, 5, 10, 50, 100, 500 and 1000 (I, V, X, L, C, D, M) the Attic % notation has symbols for the same sequence of decimal values extended with % 10\,000 and 50\,000. While typesetting philological texts in Greek it might be % necessary to use also the Attic notation. % As the original Roman notation used % to be purely additive (i.e.\ 9\,=\,VIIII), so is the Attic notation. % %\begin{macro}{\AtticNumeral} %\begin{macro}{\AtticCycl@} % Therefore another conversion macro was devised that receives the value to be % converted as its argument and checks that it falls between the boundaries; % actually the lower boundary is zero, while the upper boundary was chosen to be % 99\,999, for no other reason that the lack of further symbols, beyond the value % 50\,000, would force to long sequences of identical symbols that are difficult % to read. The |athnum.sty| package allows to extend this range to 249\,9999; % should it be necessary, the user is invited to load that package and its % transformation command |\athnum|. % % The user command |\AtticNumeral| is very simple, but it must be preceded by the % definitions of the quinary symbols for 50, 500, 5000, and 50\,000; such symbols % are present in all the CB Greek fonts in all sizes, series and shapes; therefore % the definitions must be subject to the LGR enconding: % \begin{macrocode} \DeclareTextSymbol{\Vmiria}{\GRencoding@name}{5} \DeclareTextSymbol{\Vkilo}{\GRencoding@name}{4} \DeclareTextSymbol{\Vetto}{\GRencoding@name}{3} \DeclareTextSymbol{\Vdeka}{\GRencoding@name}{2} % \end{macrocode} % The we need a command for issuing a warning message if the number to be % transformed is out of range: % \begin{macrocode} \newcommand*\attic@ill@value[1]{\PackageWarning{teubner}{% Illegal value (\number#1) for \string\ActicNumeral\space}} % \end{macrocode} % Finally the robust definition of the |\AtticNumeral| command" % \begin{macrocode} \DeclareRobustCommand*\AtticNumeral[1]{% \ifnum#1<\@ne \attic@ill@value{#1}\else \ifnum#1>99999\relax \attic@ill@value{#1}\else \AtticCycl@{#1} \fi \fi} % \end{macrocode} % The real transformation algorithm is transfered to the auxiliary macro % |\AttiCycl@|, where successive division by 10 allow to extract the various decimal % digits of various weights maintaining the remainder in the original counter; each % decimal digit is possibly divided into the quinary value and the remaining units % up to 4; the the cycle is repeated untile the decimal units, that do not require % the computation of the remainder and terminate the cycle. Notice that we use also % the $\varepsilon$-\TeX\ extended commands for integer computations; this implies % that |teubner| mus be run with a suitably recent version of the typesetting engine % that embeds the above extensions. % \begin{macrocode} \def\AtticCycl@#1{% \bgroup \countdef\valore=252\countdef\cifra=250\relax \valore=#1\relax \cifra=\valore\divide\cifra10000\relax \valore=\numexpr\valore-\cifra*10000\relax \ifnum\cifra>4\relax\Vmiria \advance\cifra-5\fi \@whilenum\cifra>\z@\do{M\advance\cifra\m@ne}% \cifra=\valore\divide\cifra1000\relax \valore=\numexpr\valore-\cifra*1000\relax \ifnum\cifra>4\relax\Vkilo \advance\cifra-5\fi \@whilenum\cifra>\z@\do{Q\advance\cifra\m@ne}% \cifra=\valore\divide\cifra100\relax \valore=\numexpr\valore-\cifra*100\relax \ifnum\cifra>4\relax\Vetto \advance\cifra-5\fi \@whilenum\cifra>\z@\do{H\advance\cifra\m@ne}% \cifra=\valore\divide\cifra10\relax \valore=\numexpr\valore-\cifra*10\relax \ifnum\cifra>4\relax\Vdeka \advance\cifra-5\fi \@whilenum\cifra>\z@\do{D\advance\cifra\m@ne}% \cifra=\valore \ifnum\cifra>4\relax P\advance\cifra-5\relax\fi \@whilenum\cifra>\z@\do{I\advance\cifra\m@ne}% \egroup} % \end{macrocode} %\end{macro} %\end{macro} % % %<*defs> % \begin{macrocode} \ProvidesFile{LGRaccents-glyphs.def}% [2011/09/07 v.3.3 Definitions of accents and glyphs for LGR encoded Greek fonts] % \end{macrocode} % \subsection{First set of extended accent definitions} % These macros were originally defined by Guenter Milde % in his file lgrenc-accents.def version 3.2 dated 2008-06-17 % and released under the LPPL LaTeX Project Public License % version 1.3 or ay later version. % % These macros were slightly modified by Claudio Beccari % in this file, version 1.0 of 2010-04-13, in order to adapt them % to the teubner.sty package, but they can be used independently of % this package. % % This modified version is released again under the LPPL license % version 1.3c or any later version. % % These definitions are a modest variation of the standard LGR % encoded ligature set, in the sense that they don't rely on % ligatures but on accent and composite text macros that address % directly the accented glyphs. % % For example, if alpha with smooth spirit, acute accent and iota % subscribed has to be inserted in the Greek text, the user % can use either one of the following solutions: % \begin{quote} % 1) \verb+>'a|+ \\ % 2) \verb+\>'a|+ % \end{quote} % Solution 1) saves hitting one key but breaks the kerning mechanism; % Solution 2) requires hitting one more key but preserves the kerning % mechanism. % % Only the diacritics that involve the breve (\u) and the macron (\=) % are regular TeX accent macros and behave as ordinary OT1-like % accents. There is no addressing of the marked glyphs, because the 256 % font table can't accommodate so many glyphs. % % This file should be usable by inputting it even without requiring the % polutoniko language attribute of the Greek language. % % For more details read the teubner.pdf and the teubner-doc.pdf files % that are part of the teubner package documentation. % % \begin{macrocode} \providecommand*\GRencoding@name{LGR} \DeclareTextAccent{\u}{\GRencoding@name}{"1E} % breve \DeclareTextAccent{\=}{\GRencoding@name}{"1F} % macron \DeclareTextAccent{\Dialytika}{\GRencoding@name}{"22} % dialytika \DeclareTextAccent{\Oxia}{\GRencoding@name}{"27} % oxia \DeclareTextAccent{\Varia}{\GRencoding@name}{"60} % varia \DeclareTextAccent{\Perispomeni}{\GRencoding@name}{"7E} % perispomeni \DeclareTextAccent{\Dasia}{\GRencoding@name}{"3C} % rough breath/spirit \DeclareTextAccent{\Psili}{\GRencoding@name}{"3E} % smooth breath/spirit \DeclareTextCommand{\<}{\GRencoding@name}{\Dasia} % alias coomand \DeclareTextCommand{\>}{\GRencoding@name}{\Psili} % alias command % \DeclareTextAccent{\DialytikaOxia}{\GRencoding@name}{"23} % oxia+dialytika \DeclareTextAccent{\DialytikaVaria}{\GRencoding@name}{"24} % varia+dialytika \DeclareTextAccent{\DialytikaPerispomeni}{\GRencoding@name}{"20} % perisp.+dial. \DeclareTextAccent{\DasiaOxia}{\GRencoding@name}{"56} % oxia+rough \DeclareTextAccent{\DasiaVaria}{\GRencoding@name}{"43} % varia+rough \DeclareTextAccent{\DasiaPerispomeni}{\GRencoding@name}{"40}% perisp.+rough \DeclareTextAccent{\PsiliOxia}{\GRencoding@name}{"5E} % oxia+smooth \DeclareTextAccent{\PsiliVaria}{\GRencoding@name}{"5F} % varia+smooth \DeclareTextAccent{\PsiliPerispomeni}{\GRencoding@name}{"5C}% perisp/+smooth % composite commands \DeclareTextCompositeCommand{\"}{\GRencoding@name}{'}{\DialytikaOxia} \DeclareTextCompositeCommand{\"}{\GRencoding@name}{\'}{\DialytikaOxia} \DeclareTextCompositeCommand{\"}{\GRencoding@name}{`}{\DialytikaVaria} \DeclareTextCompositeCommand{\"}{\GRencoding@name}{\`}{\DialytikaVaria} \DeclareTextCompositeCommand{\"}{\GRencoding@name}{~}{\DialytikaPerispomeni} \DeclareTextCompositeCommand{\"}{\GRencoding@name}{\~}{\DialytikaPerispomeni} \DeclareTextCompositeCommand{\'}{\GRencoding@name}{"}{\DialytikaOxia} \DeclareTextCompositeCommand{\'}{\GRencoding@name}{\"}{\DialytikaOxia} \DeclareTextCompositeCommand{\'}{\GRencoding@name}{<}{\DasiaOxia} \DeclareTextCompositeCommand{\'}{\GRencoding@name}{\<}{\DasiaOxia} \DeclareTextCompositeCommand{\'}{\GRencoding@name}{>}{\PsiliOxia} \DeclareTextCompositeCommand{\'}{\GRencoding@name}{\>}{\PsiliOxia} \DeclareTextCompositeCommand{\`}{\GRencoding@name}{"}{\DialytikaVaria} \DeclareTextCompositeCommand{\`}{\GRencoding@name}{\"}{\DialytikaVaria} \DeclareTextCompositeCommand{\`}{\GRencoding@name}{<}{\DasiaVaria} \DeclareTextCompositeCommand{\`}{\GRencoding@name}{\<}{\DasiaVaria} \DeclareTextCompositeCommand{\`}{\GRencoding@name}{>}{\PsiliVaria} \DeclareTextCompositeCommand{\`}{\GRencoding@name}{\>}{\PsiliVaria} \DeclareTextCompositeCommand{\~}{\GRencoding@name}{"}{\DialytikaPerispomeni} \DeclareTextCompositeCommand{\~}{\GRencoding@name}{\"}{\DialytikaPerispomeni} \DeclareTextCompositeCommand{\~}{\GRencoding@name}{<}{\DasiaPerispomeni} \DeclareTextCompositeCommand{\~}{\GRencoding@name}{\<}{\DasiaPerispomeni} \DeclareTextCompositeCommand{\~}{\GRencoding@name}{>}{\PsiliPerispomeni} \DeclareTextCompositeCommand{\~}{\GRencoding@name}{\>}{\PsiliPerispomeni} \DeclareTextCompositeCommand{\Psili}{\GRencoding@name}{'}{\PsiliOxia} \DeclareTextCompositeCommand{\Psili}{\GRencoding@name}{\'}{\PsiliOxia} \DeclareTextCompositeCommand{\Psili}{\GRencoding@name}{`}{\PsiliVaria} \DeclareTextCompositeCommand{\Psili}{\GRencoding@name}{\`}{\PsiliVaria} \DeclareTextCompositeCommand{\Psili}{\GRencoding@name}{~}{\PsiliPerispomeni} \DeclareTextCompositeCommand{\Psili}{\GRencoding@name}{\~}{\PsiliPerispomeni} \DeclareTextCompositeCommand{\Dasia}{\GRencoding@name}{'}{\DasiaOxia} \DeclareTextCompositeCommand{\Dasia}{\GRencoding@name}{\'}{\DasiaOxia} \DeclareTextCompositeCommand{\Dasia}{\GRencoding@name}{`}{\DasiaVaria} \DeclareTextCompositeCommand{\Dasia}{\GRencoding@name}{\`}{\DasiaVaria} \DeclareTextCompositeCommand{\Dasia}{\GRencoding@name}{~}{\DasiaPerispomeni} \DeclareTextCompositeCommand{\Dasia}{\GRencoding@name}{\~}{\DasiaPerispomeni} % \end{macrocode} % \subsection{Second set of extended accent definitions} % Now come another bunch of Milde's macros for composite glyphs; none of them % involves glyphs containing the subscript or adscript iota; this symbol, in facts % is postfixed to the previous glyph macro description, so its ligature takes place % after the previous glyph macro has been expanded; remember also that with the % ``high accents'' you can use both input strings, for example: |>'| and |\>'|; % therefore you can use the simple ligature input and, if kerning is not working % well with certain glyphs, you can just add a backslash in front of the ligature % sequence and everything gets fixed with proper ligatures. So, if |a>'u| with % certain fonts results in broken kerning, you just change it to |a\>'u| and the % kerning gets fixed. % \begin{macrocode} \DeclareTextComposite{\`}{\GRencoding@name}{a}{128} \DeclareTextComposite{\Dasia}{\GRencoding@name}{a}{129} \DeclareTextComposite{\Psili}{\GRencoding@name}{a}{130} \DeclareTextComposite{\'}{\GRencoding@name}{a}{136} \DeclareTextComposite{\Perispomeni}{\GRencoding@name}{a}{144} \DeclareTextComposite{\~}{\GRencoding@name}{a}{144} \DeclareTextComposite{\DasiaOxia}{\GRencoding@name}{a}{137} \DeclareTextComposite{\DasiaPerispomeni}{\GRencoding@name}{a}{145} \DeclareTextComposite{\DasiaVaria}{\GRencoding@name}{a}{131} \DeclareTextComposite{\PsiliOxia}{\GRencoding@name}{a}{138} \DeclareTextComposite{\PsiliPerispomeni}{\GRencoding@name}{a}{146} \DeclareTextComposite{\PsiliVaria}{\GRencoding@name}{a}{139} \DeclareTextComposite{\`}{\GRencoding@name}{h}{152} \DeclareTextComposite{\Dasia}{\GRencoding@name}{h}{153} \DeclareTextComposite{\Psili}{\GRencoding@name}{h}{154} \DeclareTextComposite{\DasiaVaria}{\GRencoding@name}{h}{163} \DeclareTextComposite{\'}{\GRencoding@name}{h}{160} \DeclareTextComposite{\DasiaOxia}{\GRencoding@name}{h}{161} \DeclareTextComposite{\PsiliOxia}{\GRencoding@name}{h}{162} \DeclareTextComposite{\PsiliVaria}{\GRencoding@name}{h}{171} \DeclareTextComposite{\Perispomeni}{\GRencoding@name}{h}{168} \DeclareTextComposite{\~}{\GRencoding@name}{h}{168} \DeclareTextComposite{\DasiaPerispomeni}{\GRencoding@name}{h}{169} \DeclareTextComposite{\PsiliPerispomeni}{\GRencoding@name}{h}{170} \DeclareTextComposite{\`}{\GRencoding@name}{w}{176} \DeclareTextComposite{\Dasia}{\GRencoding@name}{w}{177} \DeclareTextComposite{\Psili}{\GRencoding@name}{w}{178} \DeclareTextComposite{\DasiaVaria}{\GRencoding@name}{w}{179} \DeclareTextComposite{\'}{\GRencoding@name}{w}{184} \DeclareTextComposite{\DasiaOxia}{\GRencoding@name}{w}{185} \DeclareTextComposite{\PsiliOxia}{\GRencoding@name}{w}{186} \DeclareTextComposite{\PsiliVaria}{\GRencoding@name}{w}{187} \DeclareTextComposite{\Perispomeni}{\GRencoding@name}{w}{192} \DeclareTextComposite{\~}{\GRencoding@name}{w}{192} \DeclareTextComposite{\DasiaPerispomeni}{\GRencoding@name}{w}{193} \DeclareTextComposite{\PsiliPerispomeni}{\GRencoding@name}{w}{194} \DeclareTextComposite{\`}{\GRencoding@name}{i}{200} \DeclareTextComposite{\Dasia}{\GRencoding@name}{i}{201} \DeclareTextComposite{\Psili}{\GRencoding@name}{i}{202} \DeclareTextComposite{\DasiaVaria}{\GRencoding@name}{i}{203} \DeclareTextComposite{\'}{\GRencoding@name}{i}{208} \DeclareTextComposite{\DasiaOxia}{\GRencoding@name}{i}{209} \DeclareTextComposite{\PsiliOxia}{\GRencoding@name}{i}{210} \DeclareTextComposite{\PsiliVaria}{\GRencoding@name}{i}{211} \DeclareTextComposite{\~}{\GRencoding@name}{i}{216} \DeclareTextComposite{\DasiaPerispomeni}{\GRencoding@name}{i}{217} \DeclareTextComposite{\PsiliPerispomeni}{\GRencoding@name}{i}{218} \DeclareTextComposite{\Perispomeni}{\GRencoding@name}{i}{240} \DeclareTextComposite{\"}{\GRencoding@name}{i}{240} \DeclareTextComposite{\DialytikaVaria}{\GRencoding@name}{i}{241} \DeclareTextComposite{\DialytikaTonos}{\GRencoding@name}{i}{242} \DeclareTextComposite{\DialytikaPerispomeni}{\GRencoding@name}{i}{243} \DeclareTextComposite{\`}{\GRencoding@name}{u}{204} \DeclareTextComposite{\Dasia}{\GRencoding@name}{u}{205} \DeclareTextComposite{\Psili}{\GRencoding@name}{u}{206} \DeclareTextComposite{\DasiaVaria}{\GRencoding@name}{u}{207} \DeclareTextComposite{\'}{\GRencoding@name}{u}{212} \DeclareTextComposite{\DasiaOxia}{\GRencoding@name}{u}{213} \DeclareTextComposite{\PsiliOxia}{\GRencoding@name}{u}{214} \DeclareTextComposite{\PsiliVaria}{\GRencoding@name}{u}{215} \DeclareTextComposite{\Perispomeni}{\GRencoding@name}{u}{220} \DeclareTextComposite{\~}{\GRencoding@name}{u}{220} \DeclareTextComposite{\DasiaPerispomeni}{\GRencoding@name}{u}{221} \DeclareTextComposite{\PsiliPerispomeni}{\GRencoding@name}{u}{222} \DeclareTextComposite{\"}{\GRencoding@name}{u}{244} \DeclareTextComposite{\DialytikaVaria}{\GRencoding@name}{u}{245} \DeclareTextComposite{\DialytikaTonos}{\GRencoding@name}{u}{246} \DeclareTextComposite{\DialytikaPerispomeni}{\GRencoding@name}{u}{247} \DeclareTextComposite{\`}{\GRencoding@name}{e}{224} \DeclareTextComposite{\Dasia}{\GRencoding@name}{e}{225} \DeclareTextComposite{\Psili}{\GRencoding@name}{e}{226} \DeclareTextComposite{\DasiaVaria}{\GRencoding@name}{e}{227} \DeclareTextComposite{\'}{\GRencoding@name}{e}{232} \DeclareTextComposite{\DasiaOxia}{\GRencoding@name}{e}{233} \DeclareTextComposite{\PsiliOxia}{\GRencoding@name}{e}{234} \DeclareTextComposite{\PsiliVaria}{\GRencoding@name}{e}{235} \DeclareTextComposite{\Dasia}{\GRencoding@name}{o}{229} \DeclareTextComposite{\`}{\GRencoding@name}{o}{228} \DeclareTextComposite{\Psili}{\GRencoding@name}{o}{230} \DeclareTextComposite{\DasiaVaria}{\GRencoding@name}{o}{231} \DeclareTextComposite{\'}{\GRencoding@name}{o}{236} \DeclareTextComposite{\DasiaOxia}{\GRencoding@name}{o}{237} \DeclareTextComposite{\PsiliOxia}{\GRencoding@name}{o}{238} \DeclareTextComposite{\PsiliVaria}{\GRencoding@name}{o}{239} \DeclareTextComposite{\Dasia}{\GRencoding@name}{r}{251} \DeclareTextComposite{\Psili}{\GRencoding@name}{r}{252} % \end{macrocode} % With capital letters the dialytika (diaeresis) is maintained on top of the letters % `I' and `U', while for the other capital letters the diacritics are typeset in % front of them, not on top of them, as it is customary with Greek typesetting best % practice; the Unicode capital accented glyphs do exist, but they should never be % used; the CB fonts don't even contain them. There is no concern with kerning % because the diacritics preceding the capital letters are not preceded by something % else; what follows is kerned the usual way. With \"I and \"U specific kernings are % provided, if the dialytika macro |\"| is used; kerning with the dialytika % ligature temporarily works with kludges that should not be present in any font, but % the CB fonts have them because the |AU| and |A'U| kerning was terrible without them; % now, with Milde's macros and or the pre-existing |\Id| and |\Ud| macros, should % not be of any concern. % \begin{macrocode} \DeclareTextComposite{\"}{\GRencoding@name}{I}{219} \DeclareTextComposite{\"}{\GRencoding@name}{U}{223} % Greek Extended \DeclareTextCompositeCommand{\Psili}{\GRencoding@name}{A}{>A} \DeclareTextCompositeCommand{\Dasia}{\GRencoding@name}{A}{`A} \DeclareTextCompositeCommand{\DasiaVaria}{\GRencoding@name}{A}{<`A} \DeclareTextCompositeCommand{\PsiliOxia}{\GRencoding@name}{A}{>'A} \DeclareTextCompositeCommand{\DasiaOxia}{\GRencoding@name}{A}{<'A} \DeclareTextCompositeCommand{\PsiliPerispomeni}{\GRencoding@name}{A}{>\char126A} \DeclareTextCompositeCommand{\DasiaPerispomeni}{\GRencoding@name}{A}{<\char126A} \DeclareTextCompositeCommand{\>}{\GRencoding@name}{A}{>A} \DeclareTextCompositeCommand{\<}{\GRencoding@name}{A}{E} \DeclareTextCompositeCommand{\Dasia}{\GRencoding@name}{E}{`E} \DeclareTextCompositeCommand{\DasiaVaria}{\GRencoding@name}{E}{<`E} \DeclareTextCompositeCommand{\PsiliOxia}{\GRencoding@name}{E}{>'E} \DeclareTextCompositeCommand{\DasiaOxia}{\GRencoding@name}{E}{<'E} \DeclareTextCompositeCommand{\>}{\GRencoding@name}{E}{>E} \DeclareTextCompositeCommand{\<}{\GRencoding@name}{E}{H} \DeclareTextCompositeCommand{\Dasia}{\GRencoding@name}{H}{`H} \DeclareTextCompositeCommand{\DasiaVaria}{\GRencoding@name}{H}{<`H} \DeclareTextCompositeCommand{\PsiliOxia}{\GRencoding@name}{H}{>'H} \DeclareTextCompositeCommand{\DasiaOxia}{\GRencoding@name}{H}{<'H} \DeclareTextCompositeCommand{\PsiliPerispomeni}{\GRencoding@name}{H}{>\char126H} \DeclareTextCompositeCommand{\DasiaPerispomeni}{\GRencoding@name}{H}{<\char126H} \DeclareTextCompositeCommand{\>}{\GRencoding@name}{H}{>H} \DeclareTextCompositeCommand{\<}{\GRencoding@name}{H}{I} \DeclareTextCompositeCommand{\Dasia}{\GRencoding@name}{I}{`I} \DeclareTextCompositeCommand{\DasiaVaria}{\GRencoding@name}{I}{<`I} \DeclareTextCompositeCommand{\PsiliOxia}{\GRencoding@name}{I}{>'I} \DeclareTextCompositeCommand{\DasiaOxia}{\GRencoding@name}{I}{<'I} \DeclareTextCompositeCommand{\PsiliPerispomeni}{\GRencoding@name}{I}{>\char126I} \DeclareTextCompositeCommand{\DasiaPerispomeni}{\GRencoding@name}{I}{<\char126I} \DeclareTextCompositeCommand{\>}{\GRencoding@name}{I}{>I} \DeclareTextCompositeCommand{\<}{\GRencoding@name}{I}{O} \DeclareTextCompositeCommand{\Dasia}{\GRencoding@name}{O}{`O} \DeclareTextCompositeCommand{\DasiaVaria}{\GRencoding@name}{O}{<`O} \DeclareTextCompositeCommand{\PsiliOxia}{\GRencoding@name}{O}{>'O} \DeclareTextCompositeCommand{\DasiaOxia}{\GRencoding@name}{O}{<'O} \DeclareTextCompositeCommand{\>}{\GRencoding@name}{O}{>O} \DeclareTextCompositeCommand{\<}{\GRencoding@name}{O}{W} \DeclareTextCompositeCommand{\Dasia}{\GRencoding@name}{W}{`W} \DeclareTextCompositeCommand{\DasiaVaria}{\GRencoding@name}{W}{<`W} \DeclareTextCompositeCommand{\PsiliOxia}{\GRencoding@name}{W}{>'W} \DeclareTextCompositeCommand{\DasiaOxia}{\GRencoding@name}{W}{<'W} \DeclareTextCompositeCommand{\PsiliPerispomeni}{\GRencoding@name}{W}{>\char126W} \DeclareTextCompositeCommand{\DasiaPerispomeni}{\GRencoding@name}{W}{<\char126W} \DeclareTextCompositeCommand{\>}{\GRencoding@name}{W}{>W} \DeclareTextCompositeCommand{\<}{\GRencoding@name}{W}{ % \end{macrocode} %<*tbtx> %\section{Accessing the CBgreek fonts when the TX fonts are selected} % During the year 2010 this package \textsf{teubner.sty} was upgraded in order to allow % using the CBgreek fonts even when other Latin fonts, different from the ``standard'' CM % and LM ones are selected for typesetting text with the Latin script. % At the same time Antonis Tsolomitis uploaded a new package in order to let Greek users % use some Greek fonts that match the Times eXtended ones. In order to use the de facto % default encoding LGR for Greek fonts, he produced the necessary |lgrtxr.fd|, |lgrtxss.fd|, % |lgrtxtt.fd|, font definition files that allow the font switching implied by the |greek| % option to the \textsf{babel} package. These files take precedence over the mechanism % outlined in section~\ref{ssec:LatinFontComp}, because command |\substitutefontfamily| % first tests the existence of |lgrtxr.fd|, and, if this is not available, it may generate % a specific one suitable for working smoothly with \textsf{teubner.sty}. % % Now if Tsolomitis' files are available on the main system tree, these take precedence % and the \textsf{teubner} compatible files are not generated. Unfortunately Tsolomitis' % fonts, although better suited to match the TX fonts, are well adapted to typeset common % Greek text, but they are not adapted to typeset philological texts. % % We therefore avoid this clash by creating a \textsf{teubnertx.sty} file. This extension % defines the families and shapes available with the familiar fond definition files, but % the information gets input by \textsf{teubner.sty} at the ``begin document'' time, % without resorting to any |.fd| file. May be more information is loaded than is strictly % necessary, but it better to do this way than to clash with other packages. % \begin{macrocode} \ProvidesPackage{teubnertx}% [2011/09/07 v.3.3 Access to the LGR encoded Greek fonts when TX fonts are used] \DeclareFontFamily{LGR}{txr}{} \DeclareFontShape{LGR}{txr}{m}{n}{<->ssub * cmr/m/n}{} \DeclareFontShape{LGR}{txr}{m}{it}{<->ssub * cmr/m/it}{} \DeclareFontShape{LGR}{txr}{m}{sl}{<->ssub * cmr/m/sl}{} \DeclareFontShape{LGR}{txr}{m}{sc}{<->ssub * cmr/m/sc}{} \DeclareFontShape{LGR}{txr}{b}{n}{<->ssub * cmr/bx/n}{} \DeclareFontShape{LGR}{txr}{b}{it}{<->ssub * cmr/bx/it}{} \DeclareFontShape{LGR}{txr}{b}{sl}{<->ssub * cmr/bx/sl}{} \DeclareFontShape{LGR}{txr}{b}{sc}{<->ssub * cmr/bx/sc}{} \DeclareFontShape{LGR}{txr}{bx}{n}{<->ssub * cmr/bx/n}{} \DeclareFontShape{LGR}{txr}{bx}{it}{<->ssub * cmr/bx/it}{} \DeclareFontShape{LGR}{txr}{bx}{sl}{<->ssub * cmr/bx/sl}{} \DeclareFontShape{LGR}{txr}{bx}{sc}{<->ssub * cmr/bx/sc}{} \DeclareFontShape{LGR}{txr}{m}{li}{<->ssub * cmr/m/li}{} \DeclareFontShape{LGR}{txr}{b}{li}{<->ssub * cmr/b/li}{} \DeclareFontShape{LGR}{txr}{bx}{li}{<->ssub * cmr/bx/li}{} \DeclareFontShape{LGR}{txr}{m}{ui}{<->ssub * cmr/m/ui}{} \DeclareFontShape{LGR}{txr}{b}{ui}{<->ssub * cmr/m/ui}{} \DeclareFontShape{LGR}{txr}{bx}{ui}{<->ssub * cmr/bx/ui}{} \DeclareFontShape{LGR}{txr}{m}{rs}{<->ssub * cmr/m/rs}{} \DeclareFontShape{LGR}{txr}{b}{rs}{<->ssub * cmr/m/rs}{} \DeclareFontShape{LGR}{txr}{bx}{rs}{<->ssub * cmr/bx/rs}{} \DeclareFontFamily{LGR}{txss}{} \DeclareFontShape{LGR}{txss}{m}{n}{<->ssub * cmss/m/n}{} \DeclareFontShape{LGR}{txss}{m}{it}{<->ssub * cmss/m/it}{} \DeclareFontShape{LGR}{txss}{m}{sl}{<->ssub * cmss/m/sl}{} \DeclareFontShape{LGR}{txss}{m}{sc}{<->ssub * cmss/m/sc}{} \DeclareFontShape{LGR}{txss}{b}{n}{<->ssub * cmss/bx/n}{} \DeclareFontShape{LGR}{txss}{b}{it}{<->ssub * cmss/bx/it}{} \DeclareFontShape{LGR}{txss}{b}{sl}{<->ssub * cmss/bx/sl}{} \DeclareFontShape{LGR}{txss}{b}{sc}{<->ssub * cmss/bx/sc}{} \DeclareFontShape{LGR}{txss}{bx}{n}{<->ssub * cmss/bx/n}{} \DeclareFontShape{LGR}{txss}{bx}{it}{<->ssub * cmss/bx/it}{} \DeclareFontShape{LGR}{txss}{bx}{sl}{<->ssub * cmss/bx/sl}{} \DeclareFontShape{LGR}{txss}{bx}{sc}{<->ssub * cmss/bx/sc}{} \DeclareFontFamily{LGR}{txtt}{\hyphenchar=-1} \DeclareFontShape{LGR}{txtt}{m}{n}{<->ssub * cmtt/m/n}{} \DeclareFontShape{LGR}{txtt}{m}{it}{<->ssub * cmtt/m/it}{} \DeclareFontShape{LGR}{txtt}{m}{sl}{<->ssub * cmtt/m/sl}{} \DeclareFontShape{LGR}{txtt}{m}{sc}{<->ssub * cmtt/m/sc}{} \DeclareFontShape{LGR}{txtt}{b}{n}{<->ssub * cmtt/bx/n}{} \DeclareFontShape{LGR}{txtt}{b}{it}{<->ssub * cmtt/bx/it}{} \DeclareFontShape{LGR}{txtt}{b}{sl}{<->ssub * cmtt/bx/sl}{} \DeclareFontShape{LGR}{txtt}{b}{sc}{<->ssub * cmtt/bx/sc}{} \DeclareFontShape{LGR}{txtt}{bx}{n}{<->ssub * cmtt/bx/n}{} \DeclareFontShape{LGR}{txtt}{bx}{it}{<->ssub * cmtt/bx/it}{} \DeclareFontShape{LGR}{txtt}{bx}{sl}{<->ssub * cmtt/bx/sl}{} \DeclareFontShape{LGR}{txtt}{bx}{sc}{<->ssub * cmtt/bx/sc}{} % \end{macrocode} % % \Finale \endinput