% \iffalse meta-comment
%
% Copyright (C) 1999-2007 by Heiko Oberdiek <oberdiek@uni-freiburg.de>
%
% This work may be distributed and/or modified under the
% conditions of the LaTeX Project Public License, either
% version 1.3 of this license or (at your option) any later
% version. The latest version of this license is in
%    http://www.latex-project.org/lppl.txt
% and version 1.3 or later is part of all distributions of
% LaTeX version 2005/12/01 or later.
%
% This work has the LPPL maintenance status "maintained".
%
% This Current Maintainer of this work is Heiko Oberdiek.
%
% This work consists of the main source file holtxdoc.dtx
% and the derived files
%    holtxdoc.sty, holtxdoc.pdf, holtxdoc.ins, holtxdoc.drv.
%
% Distribution:
%    CTAN:macros/latex/contrib/oberdiek/holtxdoc.dtx
%    CTAN:macros/latex/contrib/oberdiek/holtxdoc.pdf
%
% Unpacking:
%    (a) If holtxdoc.ins is present:
%           tex holtxdoc.ins
%    (b) Without holtxdoc.ins:
%           tex holtxdoc.dtx
%    (c) If you insist on using LaTeX
%           latex \let\install=y\input{holtxdoc.dtx}
%        (quote the arguments according to the demands of your shell)
%
% Documentation:
%    (a) If holtxdoc.drv is present:
%           latex holtxdoc.drv
%    (b) Without holtxdoc.drv:
%           latex holtxdoc.dtx; ...
%    The class ltxdoc loads the configuration file ltxdoc.cfg
%    if available. Here you can specify further options, e.g.
%    use A4 as paper format:
%       \PassOptionsToClass{a4paper}{article}
%
%    Programm calls to get the documentation (example):
%       pdflatex holtxdoc.dtx
%       makeindex -s gind.ist holtxdoc.idx
%       pdflatex holtxdoc.dtx
%       makeindex -s gind.ist holtxdoc.idx
%       pdflatex holtxdoc.dtx
%
% Installation:
%    TDS:tex/latex/oberdiek/holtxdoc.sty
%    TDS:doc/latex/oberdiek/holtxdoc.pdf
%    TDS:source/latex/oberdiek/holtxdoc.dtx
%
%<*ignore>
\begingroup
  \def\x{LaTeX2e}%
\expandafter\endgroup
\ifcase 0\ifx\install y1\fi\expandafter
         \ifx\csname processbatchFile\endcsname\relax\else1\fi
         \ifx\fmtname\x\else 1\fi\relax
\else\csname fi\endcsname
%</ignore>
%<*install>
\input docstrip.tex
\Msg{************************************************************************}
\Msg{* Installation}
\Msg{* Package: holtxdoc 2007/11/11 v0.9 Private additional ltxdoc support (HO)}
\Msg{************************************************************************}

\keepsilent
\askforoverwritefalse

\let\MetaPrefix\relax
\preamble

This is a generated file.

Copyright (C) 1999-2007 by Heiko Oberdiek <oberdiek@uni-freiburg.de>

This work may be distributed and/or modified under the
conditions of the LaTeX Project Public License, either
version 1.3 of this license or (at your option) any later
version. The latest version of this license is in
   http://www.latex-project.org/lppl.txt
and version 1.3 or later is part of all distributions of
LaTeX version 2005/12/01 or later.

This work has the LPPL maintenance status "maintained".

This Current Maintainer of this work is Heiko Oberdiek.

This work consists of the main source file holtxdoc.dtx
and the derived files
   holtxdoc.sty, holtxdoc.pdf, holtxdoc.ins, holtxdoc.drv.

\endpreamble
\let\MetaPrefix\DoubleperCent

\generate{%
  \file{holtxdoc.ins}{\from{holtxdoc.dtx}{install}}%
  \file{holtxdoc.drv}{\from{holtxdoc.dtx}{driver}}%
  \usedir{tex/latex/oberdiek}%
  \file{holtxdoc.sty}{\from{holtxdoc.dtx}{package}}%
}

\obeyspaces
\Msg{************************************************************************}
\Msg{*}
\Msg{* To finish the installation you have to move the following}
\Msg{* file into a directory searched by TeX:}
\Msg{*}
\Msg{*     holtxdoc.sty}
\Msg{*}
\Msg{* And install the following script file:}
\Msg{*}
\Msg{*     }
\Msg{*}
\Msg{* To produce the documentation run the file `holtxdoc.drv'}
\Msg{* through LaTeX.}
\Msg{*}
\Msg{* Happy TeXing!}
\Msg{*}
\Msg{************************************************************************}

\endbatchfile
%</install>
%<*ignore>
\fi
%</ignore>
%<*driver>
\NeedsTeXFormat{LaTeX2e}
\ProvidesFile{holtxdoc.drv}%
  [2007/11/11 v0.9 Private additional ltxdoc support (HO)]%
\documentclass{ltxdoc}
\usepackage{holtxdoc}[2007/11/11]
\begin{document}
  \DocInput{holtxdoc.dtx}%
\end{document}
%</driver>
% \fi
%
% \CheckSum{270}
%
% \CharacterTable
%  {Upper-case    \A\B\C\D\E\F\G\H\I\J\K\L\M\N\O\P\Q\R\S\T\U\V\W\X\Y\Z
%   Lower-case    \a\b\c\d\e\f\g\h\i\j\k\l\m\n\o\p\q\r\s\t\u\v\w\x\y\z
%   Digits        \0\1\2\3\4\5\6\7\8\9
%   Exclamation   \!     Double quote  \"     Hash (number) \#
%   Dollar        \$     Percent       \%     Ampersand     \&
%   Acute accent  \'     Left paren    \(     Right paren   \)
%   Asterisk      \*     Plus          \+     Comma         \,
%   Minus         \-     Point         \.     Solidus       \/
%   Colon         \:     Semicolon     \;     Less than     \<
%   Equals        \=     Greater than  \>     Question mark \?
%   Commercial at \@     Left bracket  \[     Backslash     \\
%   Right bracket \]     Circumflex    \^     Underscore    \_
%   Grave accent  \`     Left brace    \{     Vertical bar  \|
%   Right brace   \}     Tilde         \~}
%
% \GetFileInfo{holtxdoc.drv}
%
% \title{The \xpackage{holtxdoc} package}
% \date{2007/11/11 v0.9}
% \author{Heiko Oberdiek\\\xemail{oberdiek@uni-freiburg.de}}
%
% \maketitle
%
% \begin{abstract}
% The package is used for the documentation of my packages in
% DTX format. It contains some private macros and setup for
% my needs. Thus do not use it. I have separated the part
% that may be useful for others in package \xpackage{hypdoc}.
% \end{abstract}
%
% \tableofcontents
%
% \section{No usage}
%
% Caution: \emph{This package is not intended for public use!}
%
% It contains the macros and settings to generate the
% documentation of my packages in \CTAN{macros/latex/contrib/oberdiek/}.
% Thus the package does not know anything about compatibility. Only
% my current packages' documentation must compile.
%
% Older versions were more interesting, because they contained code
% to add \xpackage{hyperref}'s features to \LaTeX's \xpackage{doc}
% system, e.g. bookmarks and index links. I separated this stuff
% and made a new package \xpackage{hypdoc}.
%
% \StopEventually{
% }
%
% \section{Implementation}
%
%    \begin{macrocode}
%<*package>
%    \end{macrocode}
%    Package identification.
%    \begin{macrocode}
\NeedsTeXFormat{LaTeX2e}
\ProvidesPackage{holtxdoc}%
  [2007/11/11 v0.9 Private additional ltxdoc support (HO)]
%    \end{macrocode}
%
%    \begin{macrocode}
\RequirePackage[numbered]{hypdoc}
\RequirePackage{array}
%    \end{macrocode}
%
% \subsection{Help macros}
%
%    \begin{macrocode}
\def\hld@info#1{%
  \PackageInfo{holtxdoc}{#1\@gobble}%
}
\def\hld@warn#1{%
  \PackageWarningNoLine{holtxdoc}{#1}%
}
%    \end{macrocode}
%
% \subsection{History}
%
%    \begin{macrocode}
\newcommand*{\StartHistory}{%
  \section{History}%
}
\newcommand*{\HistVersion}[1]{%
  \subsection*{%
    \phantomsection
    \addcontentsline{toc}{subsection}{[#1]}% hash-ok
    [#1]% hash-ok
  }%
  \def\HistLabel##1{%
    \begingroup
      \edef\x{[#1]}% hash-ok
      \let\@currentlabel\x
      \label{##1}%
    \endgroup
  }%
}
\newenvironment{History}{%
  \StartHistory
  \def\Version##1{%
    \HistVersion{##1}%
    \itemize
  }%
  \let\endVersion\enditemize
}{}
%    \end{macrocode}
%
% \subsection{Formatting macros}
%
% \cs{UrlFoot}\\
% |#1|: text\\
% |#2|: url
%    \begin{macrocode}
\newcommand{\URL}[2]{%
  #1\footnote{Url: \url{#2}}%
}
%    \end{macrocode}
% \cs{NameEmail}\\
% |#1|: name\\
% |#2|: email address
%    \begin{macrocode}
\newcommand*{\NameEmail}[2]{%
  \expandafter\hld@NameEmail\expandafter{#2}{#1}%
}
\def\hld@NameEmail#1#2{%
  \expandafter\hld@@NameEmail\expandafter{#2}{#1}%
}
\def\hld@@NameEmail#1#2{%
  \ifx\\#1#2\\%
    \hld@warn{%
      Command \string\NameEmail\space without name and email%
    }%
  \else
    \ifx\\#1\\%
      \href{mailto:#2}{\nolinkurl{#2}}%
    \else
      #1%
      \ifx\\#2\\%
      \else
        \footnote{%
          #1's email address: %
          \href{mailto:#2}{\nolinkurl{#2}}%
        }%
      \fi
    \fi
  \fi
}
%    \end{macrocode}
%
%    \begin{macrocode}
\newcommand*{\Package}[1]{\texttt{#1}}
\newcommand*{\File}[1]{\texttt{#1}}
\newcommand*{\Verb}[1]{\texttt{#1}}
\newcommand*{\CS}[1]{\texttt{\expandafter\@gobble\string\\#1}}
%    \end{macrocode}
%
%    \begin{macrocode}
\newcommand*{\CTAN}[1]{%
  \href{ftp://ftp.ctan.org/tex-archive/#1}{\nolinkurl{CTAN:#1}}%
}
%    \end{macrocode}
%    \begin{macrocode}
\newcommand*{\Newsgroup}[1]{%
  \href{http://groups.google.com/group/#1}{\nolinkurl{news:#1}}%
}
%    \end{macrocode}
%
%    \begin{macrocode}
\newcommand*{\xpackage}[1]{\textsf{#1}}
\newcommand*{\xclass}[1]{\textsf{#1}}
\newcommand*{\xoption}[1]{\textsf{#1}}
\newcommand*{\xfile}[1]{\texttt{#1}}
\newcommand*{\xext}[1]{\texttt{.#1}}
\newcommand*{\xemail}[1]{%
  \textless\texttt{#1}\textgreater%
}
\newcommand*{\xnewsgroup}[1]{\texttt{#1}}
%    \end{macrocode}
%
%    The following environment |declcs| is derived from
%    environment |decl| of \xfile{ltxguide.cls}:
%    \begin{macrocode}
\newenvironment{declcs}[1]{%
  \par
  \addvspace{4.5ex plus 1ex}%
  \vskip -\parskip
  \noindent
  \hspace{-\leftmargini}%
  \def\M##1{\texttt{\{}\meta{##1}\texttt{\}}}%
  \def\*{\unskip\,\texttt{*}}%
  \begin{tabular}{|l|}%
    \hline
    \expandafter\SpecialUsageIndex\csname #1\endcsname
    \cs{#1}%
}{%
    \\%
    \hline
  \end{tabular}%
  \nobreak
  \par
  \nobreak
  \vspace{2.3ex}%
  \vskip -\parskip
  \noindent
  \ignorespacesafterend
}
%    \end{macrocode}
%
% \subsection{Names}
%
%    \begin{macrocode}
\providecommand*{\eTeX}{\mbox{$\varepsilon$-\TeX}}
\providecommand*{\pdfTeX}{pdf\TeX}
\providecommand*{\pdfLaTeX}{pdf\LaTeX}
\providecommand*{\LuaTeX}{L\textsc{ua}\TeX}
\def\@temp#1#2{%
  \providecommand*{#1}{%
    \begingroup
      X%
      \@ifundefined{rotatebox}{e}{%
        \lower0.5ex\hbox{%
          \setbox0=\hbox{E}%
          \dimen0=\ht0 %
          \advance\dimen0 by \dp0 %
          \raise\dimen0\hbox{\rotatebox{180}{\box0}}%
        }%
      }%
      #2%
    \endgroup
  }%
}
\@temp\XeTeX\TeX
\@temp\XeLaTeX\LaTeX
\providecommand*{\teTeX}{te\TeX}
\providecommand*{\mikTeX}{mik\TeX}
\providecommand*{\MakeIndex}{\textsl{MakeIndex}}
\providecommand*{\docstrip}{\textsf{docstrip}}
\providecommand*{\plainTeX}{\mbox{plain-\TeX}}
\providecommand*{\VTeX}{V\TeX}
%    \end{macrocode}
%
% \subsection{Setup}
%
% \subsubsection{Package \xpackage{doc}}
%
%    \begin{macrocode}
\CodelineIndex
\EnableCrossrefs
\setcounter{IndexColumns}{2}
%    \end{macrocode}
%    \begin{macrocode}
\DoNotIndex{\begingroup,\endgroup,\bgroup,\egroup}
\DoNotIndex{\def,\edef,\xdef,\global,\long,\let}
\DoNotIndex{\expandafter,\noexpand,\string}
\DoNotIndex{\else,\fi,\or}
\DoNotIndex{\relax}
%    \end{macrocode}
%
% \subsubsection{Page layout}
%    \begin{macrocode}
\addtolength{\textheight}{\headheight}
\addtolength{\textheight}{\headsep}
\setlength{\headheight}{0pt}
\setlength{\headsep}{0pt}
%    \end{macrocode}
%    \begin{macrocode}
\addtolength{\topmargin}{-10mm}
\addtolength{\textheight}{20mm}
%    \end{macrocode}
%    \begin{macrocode}
%</package>
%    \end{macrocode}
%
% \section{Installation}
%
% \subsection{Download}
%
% \paragraph{Package.} This package is available on
% CTAN\footnote{\url{ftp://ftp.ctan.org/tex-archive/}}:
% \begin{description}
% \item[\CTAN{macros/latex/contrib/oberdiek/holtxdoc.dtx}] The source file.
% \item[\CTAN{macros/latex/contrib/oberdiek/holtxdoc.pdf}] Documentation.
% \end{description}
%
%
% \paragraph{Bundle.} All the packages of the bundle `oberdiek'
% are also available in a TDS compliant ZIP archive. There
% the packages are already unpacked and the documentation files
% are generated. The files and directories obey the TDS standard.
% \begin{description}
% \item[\CTAN{macros/latex/contrib/oberdiek/oberdiek-tds.zip}]
% \end{description}
% \emph{TDS} refers to the standard ``A Directory Structure
% for \TeX\ Files'' (\CTAN{tds/tds.pdf}). Directories
% with \xfile{texmf} in their name are usually organized this way.
%
% \subsection{Bundle installation}
%
% \paragraph{Unpacking.} Unpack the \xfile{oberdiek-tds.zip} in the
% TDS tree (also known as \xfile{texmf} tree) of your choice.
% Example (linux):
% \begin{quote}
%   |unzip oberdiek-tds.zip -d ~/texmf|
% \end{quote}
%
% \paragraph{Script installation.}
% Check the directory \xfile{TDS:scripts/oberdiek/} for
% scripts that need further installation steps.
% Package \xpackage{attachfile2} comes with the Perl script
% \xfile{pdfatfi.pl} that should be installed in such a way
% that it can be called as \texttt{pdfatfi}.
% Example (linux):
% \begin{quote}
%   |chmod +x scripts/oberdiek/pdfatfi.pl|\\
%   |cp scripts/oberdiek/pdfatfi.pl /usr/local/bin/|
% \end{quote}
%
% \subsection{Package installation}
%
% \paragraph{Unpacking.} The \xfile{.dtx} file is a self-extracting
% \docstrip\ archive. The files are extracted by running the
% \xfile{.dtx} through \plainTeX:
% \begin{quote}
%   \verb|tex holtxdoc.dtx|
% \end{quote}
%
% \paragraph{TDS.} Now the different files must be moved into
% the different directories in your installation TDS tree
% (also known as \xfile{texmf} tree):
% \begin{quote}
% \def\t{^^A
% \begin{tabular}{@{}>{\ttfamily}l@{ $\rightarrow$ }>{\ttfamily}l@{}}
%   holtxdoc.sty & tex/latex/oberdiek/holtxdoc.sty\\
%   holtxdoc.pdf & doc/latex/oberdiek/holtxdoc.pdf\\
%   holtxdoc.dtx & source/latex/oberdiek/holtxdoc.dtx\\
% \end{tabular}^^A
% }^^A
% \sbox0{\t}^^A
% \ifdim\wd0>\linewidth
%   \begingroup
%     \advance\linewidth by\leftmargin
%     \advance\linewidth by\rightmargin
%   \edef\x{\endgroup
%     \def\noexpand\lw{\the\linewidth}^^A
%   }\x
%   \def\lwbox{^^A
%     \leavevmode
%     \hbox to \linewidth{^^A
%       \kern-\leftmargin\relax
%       \hss
%       \usebox0
%       \hss
%       \kern-\rightmargin\relax
%     }^^A
%   }^^A
%   \ifdim\wd0>\lw
%     \sbox0{\small\t}^^A
%     \ifdim\wd0>\linewidth
%       \ifdim\wd0>\lw
%         \sbox0{\footnotesize\t}^^A
%         \ifdim\wd0>\linewidth
%           \ifdim\wd0>\lw
%             \sbox0{\scriptsize\t}^^A
%             \ifdim\wd0>\linewidth
%               \ifdim\wd0>\lw
%                 \sbox0{\tiny\t}^^A
%                 \ifdim\wd0>\linewidth
%                   \lwbox
%                 \else
%                   \usebox0
%                 \fi
%               \else
%                 \lwbox
%               \fi
%             \else
%               \usebox0
%             \fi
%           \else
%             \lwbox
%           \fi
%         \else
%           \usebox0
%         \fi
%       \else
%         \lwbox
%       \fi
%     \else
%       \usebox0
%     \fi
%   \else
%     \lwbox
%   \fi
% \else
%   \usebox0
% \fi
% \end{quote}
% If you have a \xfile{docstrip.cfg} that configures and enables \docstrip's
% TDS installing feature, then some files can already be in the right
% place, see the documentation of \docstrip.
%
% \subsection{Refresh file name databases}
%
% If your \TeX~distribution
% (\teTeX, \mikTeX, \dots) relies on file name databases, you must refresh
% these. For example, \teTeX\ users run \verb|texhash| or
% \verb|mktexlsr|.
%
% \subsection{Some details for the interested}
%
% \paragraph{Attached source.}
%
% The PDF documentation on CTAN also includes the
% \xfile{.dtx} source file. It can be extracted by
% AcrobatReader 6 or higher. Another option is \textsf{pdftk},
% e.g. unpack the file into the current directory:
% \begin{quote}
%   \verb|pdftk holtxdoc.pdf unpack_files output .|
% \end{quote}
%
% \paragraph{Unpacking with \LaTeX.}
% The \xfile{.dtx} chooses its action depending on the format:
% \begin{description}
% \item[\plainTeX:] Run \docstrip\ and extract the files.
% \item[\LaTeX:] Generate the documentation.
% \end{description}
% If you insist on using \LaTeX\ for \docstrip\ (really,
% \docstrip\ does not need \LaTeX), then inform the autodetect routine
% about your intention:
% \begin{quote}
%   \verb|latex \let\install=y\input{holtxdoc.dtx}|
% \end{quote}
% Do not forget to quote the argument according to the demands
% of your shell.
%
% \paragraph{Generating the documentation.}
% You can use both the \xfile{.dtx} or the \xfile{.drv} to generate
% the documentation. The process can be configured by the
% configuration file \xfile{ltxdoc.cfg}. For instance, put this
% line into this file, if you want to have A4 as paper format:
% \begin{quote}
%   \verb|\PassOptionsToClass{a4paper}{article}|
% \end{quote}
% An example follows how to generate the
% documentation with pdf\LaTeX:
% \begin{quote}
%\begin{verbatim}
%pdflatex holtxdoc.dtx
%makeindex -s gind.ist holtxdoc.idx
%pdflatex holtxdoc.dtx
%makeindex -s gind.ist holtxdoc.idx
%pdflatex holtxdoc.dtx
%\end{verbatim}
% \end{quote}
%
% \begin{History}
%   \begin{Version}{1999/06/26 v0.3}
%   \item
%     \dots
%   \end{Version}
%   \begin{Version}{2000/08/14 v0.4}
%   \item
%     \dots
%   \end{Version}
%   \begin{Version}{2001/08/27 v0.5}
%   \item
%     \dots
%   \end{Version}
%   \begin{Version}{2001/09/02 v0.6}
%   \item
%     \dots
%   \end{Version}
%   \begin{Version}{2006/06/02 v0.7}
%   \item
%     Major change: most is put into a new package \xpackage{hypdoc}.
%   \end{Version}
%   \begin{Version}{2007/10/21 v0.8}
%   \item
%     \cs{XeTeX} and \cs{XeLaTeX} added.
%   \end{Version}
%   \begin{Version}{2007/11/11 v0.9}
%   \item
%     \cs{LuaTeX} added.
%   \end{Version}
% \end{History}
%
% \PrintIndex
%
% \Finale
\endinput
