% \iffalse meta-comment
%
% Copyright (C) 1999, 2006, 2007 by
%    Heiko Oberdiek <oberdiek@uni-freiburg.de>
%
% This work may be distributed and/or modified under the
% conditions of the LaTeX Project Public License, either
% version 1.3 of this license or (at your option) any later
% version. The latest version of this license is in
%    http://www.latex-project.org/lppl.txt
% and version 1.3 or later is part of all distributions of
% LaTeX version 2005/12/01 or later.
%
% This work has the LPPL maintenance status "maintained".
%
% This Current Maintainer of this work is Heiko Oberdiek.
%
% This work consists of the main source file alphalph.dtx
% and the derived files
%    alphalph.sty, alphalph.pdf, alphalph.ins, alphalph.drv.
%
% Distribution:
%    CTAN:macros/latex/contrib/oberdiek/alphalph.dtx
%    CTAN:macros/latex/contrib/oberdiek/alphalph.pdf
%
% Unpacking:
%    (a) If alphalph.ins is present:
%           tex alphalph.ins
%    (b) Without alphalph.ins:
%           tex alphalph.dtx
%    (c) If you insist on using LaTeX
%           latex \let\install=y\input{alphalph.dtx}
%        (quote the arguments according to the demands of your shell)
%
% Documentation:
%    (a) If alphalph.drv is present:
%           latex alphalph.drv
%    (b) Without alphalph.drv:
%           latex alphalph.dtx; ...
%    The class ltxdoc loads the configuration file ltxdoc.cfg
%    if available. Here you can specify further options, e.g.
%    use A4 as paper format:
%       \PassOptionsToClass{a4paper}{article}
%
%    Programm calls to get the documentation (example):
%       pdflatex alphalph.dtx
%       makeindex -s gind.ist alphalph.idx
%       pdflatex alphalph.dtx
%       makeindex -s gind.ist alphalph.idx
%       pdflatex alphalph.dtx
%
% Installation:
%    TDS:tex/generic/oberdiek/alphalph.sty
%    TDS:doc/latex/oberdiek/alphalph.pdf
%    TDS:source/latex/oberdiek/alphalph.dtx
%
%<*ignore>
\begingroup
  \def\x{LaTeX2e}%
\expandafter\endgroup
\ifcase 0\ifx\install y1\fi\expandafter
         \ifx\csname processbatchFile\endcsname\relax\else1\fi
         \ifx\fmtname\x\else 1\fi\relax
\else\csname fi\endcsname
%</ignore>
%<*install>
\input docstrip.tex
\Msg{************************************************************************}
\Msg{* Installation}
\Msg{* Package: alphalph 2007/04/11 v1.5 Converting numbers to letters (HO)}
\Msg{************************************************************************}

\keepsilent
\askforoverwritefalse

\preamble

This is a generated file.

Copyright (C) 1999, 2006, 2007 by
   Heiko Oberdiek <oberdiek@uni-freiburg.de>

This work may be distributed and/or modified under the
conditions of the LaTeX Project Public License, either
version 1.3 of this license or (at your option) any later
version. The latest version of this license is in
   http://www.latex-project.org/lppl.txt
and version 1.3 or later is part of all distributions of
LaTeX version 2005/12/01 or later.

This work has the LPPL maintenance status "maintained".

This Current Maintainer of this work is Heiko Oberdiek.

This work consists of the main source file alphalph.dtx
and the derived files
   alphalph.sty, alphalph.pdf, alphalph.ins, alphalph.drv.

\endpreamble

\generate{%
  \file{alphalph.ins}{\from{alphalph.dtx}{install}}%
  \file{alphalph.drv}{\from{alphalph.dtx}{driver}}%
  \usedir{tex/generic/oberdiek}%
  \file{alphalph.sty}{\from{alphalph.dtx}{package}}%
}

\obeyspaces
\Msg{************************************************************************}
\Msg{*}
\Msg{* To finish the installation you have to move the following}
\Msg{* file into a directory searched by TeX:}
\Msg{*}
\Msg{*     alphalph.sty}
\Msg{*}
\Msg{* To produce the documentation run the file `alphalph.drv'}
\Msg{* through LaTeX.}
\Msg{*}
\Msg{* Happy TeXing!}
\Msg{*}
\Msg{************************************************************************}

\endbatchfile
%</install>
%<*ignore>
\fi
%</ignore>
%<*driver>
\NeedsTeXFormat{LaTeX2e}
\ProvidesFile{alphalph.drv}%
  [2007/04/11 v1.5 Converting numbers to letters (HO)]%
\documentclass{ltxdoc}
\usepackage{holtxdoc}
\usepackage{alphalph}
\begin{document}
  \DocInput{alphalph.dtx}%
\end{document}
%</driver>
% \fi
%
% \CheckSum{393}
%
% \CharacterTable
%  {Upper-case    \A\B\C\D\E\F\G\H\I\J\K\L\M\N\O\P\Q\R\S\T\U\V\W\X\Y\Z
%   Lower-case    \a\b\c\d\e\f\g\h\i\j\k\l\m\n\o\p\q\r\s\t\u\v\w\x\y\z
%   Digits        \0\1\2\3\4\5\6\7\8\9
%   Exclamation   \!     Double quote  \"     Hash (number) \#
%   Dollar        \$     Percent       \%     Ampersand     \&
%   Acute accent  \'     Left paren    \(     Right paren   \)
%   Asterisk      \*     Plus          \+     Comma         \,
%   Minus         \-     Point         \.     Solidus       \/
%   Colon         \:     Semicolon     \;     Less than     \<
%   Equals        \=     Greater than  \>     Question mark \?
%   Commercial at \@     Left bracket  \[     Backslash     \\
%   Right bracket \]     Circumflex    \^     Underscore    \_
%   Grave accent  \`     Left brace    \{     Vertical bar  \|
%   Right brace   \}     Tilde         \~}
%
% \GetFileInfo{alphalph.drv}
%
% \title{The \xpackage{alphalph} package}
% \date{2007/04/11 v1.5}
% \author{Heiko Oberdiek\\\xemail{oberdiek@uni-freiburg.de}}
%
% \maketitle
%
% \begin{abstract}
% The package provides the new expandable commands \cs{alphalph}
% and \cs{AlphAlph}. They are like \cs{number}, but the expansion
% consists of lowercase and uppercase letters respectively.
% \end{abstract}
%
% \tableofcontents
%
% \newenvironment{param}{^^A
%   \newcommand{\entry}[1]{\meta{\###1}:&}^^A
%   \begin{tabular}[t]{@{}l@{ }l@{}}^^A
% }{^^A
%   \end{tabular}^^A
% }
%
% \section{Usage}
%    The package \Package{alphalph} can be used with both \plainTeX\
%    and \LaTeX:
%    \begin{description}
%    \item[\plainTeX:] |\input alphalph.sty|
%    \item[\LaTeXe:]   |\usepackage{alphalph}|\\
%         There aren't any options.
%    \end{description}
%
% \subsection{User commands}
%    \begin{description}
%    \item[\cmd{\alphalph}:]\DescribeMacro{\alphalph}
%      This works like \cmd{\number}, but the expansion consists of
%      lowercase letters.
%    \item[\cmd{\AlphAlph}:]\DescribeMacro{\AlphAlph}
%      It converts a number into uppercase letters.
%    \end{description}
%    Both commands have following properties:
%    \begin{itemize}
%    \item They are fully expandable. This means that they can safely
%          \begin{itemize}
%          \item be written to a file,
%          \item used in moving arguments (\LaTeX: they are \emph{robust}),
%          \item used in a \cmd{\csname}-\cmd{\endcsname} pair.
%          \end{itemize}
%    \item If the argument is zero or negative, the commands expand
%          to nothing like \cmd{\romannumeral}.
%    \item As argument is allowed all that can be used after a \cmd{\number}:
%          \begin{itemize}
%          \item explicite constants,
%          \item macros that expand to a number,
%          \item count registers, \LaTeX\ counter can used
%                via \cmd{\value}, e.\,g.:\\
%                |\alphalph{\value{page}}|
%          \end{itemize}
%    \end{itemize}
%
%    The following table shows, how the conversion is made:
%    \begin{center}
%      \catcode`\|=12
%      \catcode`\+\active
%      \def+#1&{\alphalph{#1}&}%
%      \begin{tabular}{@{}l|*{14}{r@{, }}r@{}}
%      number         & 1& 2&\dots& 26& 27&\dots& 52& 53&
%                     \dots& 78& 79&\dots& 702& 703&\dots
%      \\\hline
%      \cmd{\alphalph}&+1&+2&\dots&+26&+27&\dots&+52&+53&
%                     \dots&+78&+79&\dots&+702&+703&\dots
%      \end{tabular}
%    \end{center}
%
% \subsubsection{New commands like \cs{alphalph}}
%   \begin{description}
%   \item[\cmd{\newalphalph}:]\DescribeMacro{\newalphalph}
%     This macro defines a new command that acts like \cs{alphalph}.
%     The use of \eTeX is required.
%     The macro has three arguments:
%     \begin{itemize}
%     \item[\texttt{\#1}:] The command to be defined.
%     \item[\texttt{\#2}:] A macro that converts a positive number
%                         to a symbol.
%     \item[\texttt{\#3}:] The number of available symbols.
%     \end{itemize}
%   \end{description}
%
%   Example:
%\begin{quote}
%\begin{verbatim}
%\newcommand*{\myvocals}[1]{%
%  \ifcase#1\or A\or E\or I\or O\or U\fi
%}
%\newalphalph{\vocalsvocals}{\myvocals}{5}
%\end{verbatim}
%\end{quote}
%
% \StopEventually{
% }
%
% \section{Implementation}
% \subsection{Begin\texorpdfstring{ of package}{}}
%    \begin{macrocode}
%<*package>
%    \end{macrocode}
%    Reload check, especially if the package is not used with \LaTeX.
%    \begin{macrocode}
\begingroup
  \expandafter\let\expandafter\x\csname ver@alphalph.sty\endcsname
  \ifcase 0%
    \ifx\x\relax % plain
    \else
      \ifx\x\empty % LaTeX
      \else
        1%
      \fi
    \fi
  \else
    \expandafter\ifx\csname PackageInfo\endcsname\relax
      \def\x#1#2{%
        \immediate\write-1{Package #1 Info: #2.}%
      }%
    \else
      \def\x#1#2{\PackageInfo{#1}{#2, stopped}}%
    \fi
    \x{alphalph}{The package is already loaded}%
    \endgroup
    \expandafter\endinput
  \fi
\endgroup
%    \end{macrocode}
%    Package identification:
%    \begin{macrocode}
\begingroup
  \expandafter\ifx\csname ProvidesPackage\endcsname\relax
    \def\x#1#2#3[#4]{\endgroup
      \immediate\write-1{Package: #3 #4}%
      \xdef#1{#4}%
    }%
  \else
    \def\x#1#2[#3]{\endgroup
      #2[{#3}]%
      \ifx#1\relax
        \xdef#1{#3}%
      \fi
    }%
  \fi
\expandafter\x\csname ver@alphalph.sty\endcsname
\ProvidesPackage{alphalph}%
  [2007/04/11 v1.5 Converting numbers to letters (HO)]
%    \end{macrocode}
%
%    For unique command names this package uses |aa@| as prefix
%    for internal command names. Because we need |@| as a letter
%    we save the current catcode value.
%    \begin{macrocode}
\expandafter\edef\csname aa@atcode\endcsname{\the\catcode`\@ }
\catcode`\@=11
%    \end{macrocode}
%
% \subsection{Help macros}
%    \begin{macro}{\@ReturnAfterElseFi}
%    \begin{macro}{\@ReturnAfterFi}
%    The following commands moves the `then' and `else' part respectively
%    behind the |\if|-construct. This prevents a too deep |\if|-nesting
%    and so a \TeX\ capacity error because of a limited input stack size.
%    I use this trick in several packages, so I don't prefix these internal
%    commands in order not to have the same macros with different names.
%    (It saves memory).
%    \begin{macrocode}
\long\def\@ReturnAfterElseFi#1\else#2\fi{\fi#1}
\long\def\@ReturnAfterFi#1\fi{\fi#1}
%    \end{macrocode}
%    \end{macro}
%    \end{macro}
%
%    \begin{macro}{\aa@alph}
%    \begin{macro}{\aa@Alph}
%    The two commands \cmd{\aa@alph} and \cmd{\aa@Alph} convert a
%    number into a letter (lowercase and uppercase respectivly).
%    The character |@| is used as an error symbol,
%    if the number isn't in the range of 1 until 26.
%    Here we need no space after the number |#1|, because the error
%    symbol |@| for the zero case stops scanning the number.
%    \begin{macrocode}
\def\aa@alph#1{%
  \ifcase#1%
    @%
  \or a\or b\or c\or d\or e\or f\or g\or h\or i\or j\or k\or l\or m%
  \or n\or o\or p\or q\or r\or s\or t\or u\or v\or w\or x\or y\or z%
  \else
    @%
  \fi
}
\def\aa@Alph#1{%
  \ifcase#1%
    @%
  \or A\or B\or C\or D\or E\or F\or G\or H\or I\or J\or K\or L\or M%
  \or N\or O\or P\or Q\or R\or S\or T\or U\or V\or W\or X\or Y\or Z%
  \else
    @%
  \fi
}
%    \end{macrocode}
%    \end{macro}
%    \end{macro}
%
% \subsection{User commands}
%    \begin{macro}{\alphalph}
%    \begin{macro}{\AlphAlph}
%    The whole difference between \cmd{\alphalph} and \cmd{\AlphAlph}
%    is that the output consists of lowercase or uppercase letters.
%    \begin{macrocode}
\def\alphalph{\aa@callmake\aa@alph}
\def\AlphAlph{\aa@callmake\aa@Alph}
%    \end{macrocode}
%    \end{macro}
%    \end{macro}
%
%    \begin{macro}{\aa@callmake}
%    \cmd{\aa@callmake} converts the number in
%    the second argument |#2| into explicite decimal digits via
%    the \TeX\ primitive \cmd{\number}. (The closing curly brace stops reading
%    the number at the latest.)
%    \begin{macrocode}
\def\aa@callmake#1#2{%
  \expandafter\aa@make\expandafter{\number#2}#1%
}
%    \end{macrocode}
%    \end{macro}
%
%    \eTeX provides the new primitive \cmd{\numexpr}.
%    With this command the implementation is very simple
%    (see \ref{sec:etex}). Therefore the package provides two
%    methods: a fast and simple one that uses the \eTeX\ extension
%    and a method that is restricted to the standard \TeX\ means.
%
%    Now we distinguish between \TeX\ and \eTeX\ by checking
%    whether \cmd{\numexpr} is defined or isn't.
%    Because the \TeX\ primitive \cmd{\csname} defines an
%    undefined command to be \cmd{\relax}, \cmd{\csname}
%    is executed in a group.
%    \begin{macrocode}
\begingroup\expandafter\expandafter\expandafter\endgroup
\expandafter\ifx\csname numexpr\endcsname\relax
%    \end{macrocode}
%
% \subsection{\texorpdfstring{Conversion with standard \TeX\ means}{\TeX}}
%    \begin{macro}{\aa@make}
%    \cmd{\aa@make} catches the cases, if the number is zero or negative.
%    Then it expands to nothing like \cmd{\romannumeral}.
%    \begin{macrocode}
  \def\aa@make#1#2{%
    \ifnum#1<1 %
    \else
      \@ReturnAfterFi{%
        \aa@process1;#1;1..#2%
      }%
    \fi
  }%
%    \end{macrocode}
%    \end{macro}
%
%    \begin{macro}{\aa@process}
%    \cmd{\aa@process} contains the algorithm for the conversion.
%    \TeX doesn't provide a simple method to divide or multiply
%    numbers in a fully expandable way. An expandable addition by one
%    is complicated enough. Therefore \cmd{\aa@process} uses
%    only expandible versions of additions by one. The algorithm
%    starts with one and increments it until the size of the wanted
%    number is reached. The intermediate number that is incremented
%    is present in two kinds:
%    \begin{itemize}
%    \item the normal decimal form for the \cs{ifnum}-comparison,
%    \item a digit format: the end of each digit is marked by an dot,
%          and the digits are in reserved order. An empty digit
%          ends this format. The meaning of a digit is here the
%          decimal representation of a letter, the range is
%          from 1 until 26.
%    \end{itemize}
%    Example: The aim number is 100, the intermediate number 50, so
%    following would be on the argument stack:
%    \begin{quote}
%      |50;100;24.1..\aa@alph|
%    \end{quote}
%    \cmd{\aa@process} increments the first argument |#1| (|50|),
%    and calls \cmd{\aa@alphinc} to increment the digit form
%    (|24.1..|). The middle part with the aim number |;#2;| (|;100;|)
%    will not be changed. Neither \cmd{\aa@process} nor \cmd{\aa@alphinc}
%    need the conversion command \cmd{\aa@alph} nor \cmd{\aa@Alph}.
%    This command is read by \cmd{\aa@getresult}, if the digit form is
%    ready.
%
%    The expansion motor is \cmd{\number}. It reads and expands token
%    to get decimal numbers until a token is reached that isn't a
%    decimal digit. So the expansion doesn't stop, if \cmd{\aa@inc}
%    is ready, because \cmd{\aa@inc} produces only decimal digits.
%    \cmd{\aa@alphinc} is expanded to look for further digits.
%    Now \cmd{\aa@alphinc} makes its job and returns with its
%    argument |;#2;|. At last the first character |;| finishes \cmd{\number}.
%    \begin{macrocode}
  \def\aa@process#1;#2;{%
    \ifnum#1=#2 %
      \expandafter\aa@getresult
    \else
      \@ReturnAfterFi{%
        \expandafter\aa@process\number\aa@inc{#1}\aa@alphinc{;#2;}%
      }%
    \fi
  }%
%    \end{macrocode}
%    \end{macro}
%
% \subsubsection{\texorpdfstring{^^A
% Convert the separated digits to the letter result}{^^A
% Digits to letter result}}\label{sec:form}
%
%    The single decimal digits of the final letter number are
%    limited by a dot and come in reverse order. The end is
%    marked by an empty digit.
%    The next token is the command to convert a digit
%    (\cmd{\aa@alph} or \cmd{\aa@Alph}), e.g.:
%    \begin{quote}
%      |11.3.1..\alph| $\Rightarrow$ |ack|
%    \end{quote}
%
%    \begin{macro}{\aa@getresult}
%    \cmd{\aa@getresult} reads the digits |#1| and the converting
%    command |#2|. Then it
%    calls \cmd{\aa@@getresult} with its arguments.
%    \begin{macrocode}
  \def\aa@getresult#1..#2{%
    \aa@@getresult!#2#1..%
  }%
%    \end{macrocode}
%    \end{macro}
%
%    \begin{macro}{\aa@@getresult}
%    In its first argument |#1| \cmd{\aa@@getresult} collects the
%    converted letters in the correct order. Character |!| is used
%    as a parameter separator. The next token |#2| is the converting
%    command (\cmd{\aa@alph} or \cmd{\aa@Alph}). The next digit |#3|
%    is read, converted, and |\aa@@getresult| is called again.
%    If the digit |#3| is empty, the end of the digit form is reached
%    and the process stops and the ready letter number is output.
%    \begin{macrocode}
  \def\aa@@getresult#1!#2#3.{%
    \ifx\\#3\\%
      \@ReturnAfterElseFi{#1}% ready
    \else
      \@ReturnAfterFi{%
        \expandafter\expandafter\expandafter\expandafter
        \expandafter\expandafter\expandafter
        \aa@@getresult
        \expandafter\expandafter\expandafter\expandafter
        #2{#3}#1!#2%
      }%
    \fi
  }%
%    \end{macrocode}
%    \end{macro}
%
% \subsubsection{Addition by one}
%
% \paragraph{Expandable addition of a decimal integer.}
%    \begin{macro}{\aa@inc}
%    \cmd{\aa@inc} increments its argument |#1| by one.
%    The case, that the whole number is less than nine, is
%    specially treated because of speed. (The space
%    after |9| is neccessary.)
%    \begin{macrocode}
% \aa@inc adds one to its argument #1.
  \def\aa@inc#1{%
    \ifnum#1<9 %
      \aa@nextdigit{#1}%
    \else
      \aa@reverse#1!!%
    \fi
  }%
%    \end{macrocode}
%    \end{macro}
%    \begin{macro}{\aa@nextdigit}
%    \cmd{\aa@nextdigit} increments the digit |#1|. The result
%    is a digit again. \cmd{\aa@addone} works off the case ``9+1''.
%    \begin{macrocode}
  \def\aa@nextdigit#1{\ifcase#1 1\or2\or3\or4\or5\or6\or7\or8\or9\fi}%
%    \end{macrocode}
%    \end{macro}
%    \begin{macro}{\aa@reverse}
%    Because the addition starts with the lowest significant digit
%    of the number. But with the means of \TeX's macro expansion is
%    the first digit of a number available. So \cmd{\aa@reverse}
%    reverses the order of the digits and calls \cmd{\aa@addone},
%    if it is ready.
%    \begin{macrocode}
  \def\aa@reverse#1#2!#3!{%
    \ifx\\#2\\%
      \aa@addone#1#3!!%
    \else
      \@ReturnAfterFi{%
        \aa@reverse#2!#1#3!%
      }%
    \fi
  }%
%    \end{macrocode}
%    \end{macro}
%    \begin{macro}{\aa@addone}
%    The addition is performed by the macro \cmd{\aa@addone}.
%    The digits are in reversed order. The parameter text |#1#2|
%    separates the next digit |#1| that have to be incremented.
%    Already incremented digits are stored in |#3| in reversed order
%    to take some work of \cmd{\aa@lastreverse}.
%    \begin{macrocode}
  \def\aa@addone#1#2!#3!{%
    \ifnum#1<9 %
      \expandafter\aa@lastreverse\number\aa@nextdigit#1 #2!#3!%
    \else
      \@ReturnAfterFi{%
        \ifx\\#2\\%
          10#3%
        \else
          \@ReturnAfterFi{%
            \aa@addone#2!0#3!%
          }%
        \fi
      }%
    \fi
  }%
%    \end{macrocode}
%    \end{macro}
%    \begin{macro}{\aa@lastreverse}
%    With \cmd{\aa@reverse} the order of the digits is changed to
%    perform the addition in \cmd{\aa@addone}. Now we have to return
%    to the original order that is done by \cmd{\aa@lastreverse}.
%    \begin{macrocode}
  \def\aa@lastreverse#1#2!#3!{%
    \ifx\\#2\\%
      #1#3%
    \else
      \@ReturnAfterFi{%
        \aa@lastreverse#2!#1#3!%
      }%
    \fi
  }%
%    \end{macrocode}
%    \end{macro}
%
% \paragraph{Increment of the decimal digit result form.}
%    \begin{macro}{\aa@alphinc}
%    \cmd{\aa@alphinc} adds one to the intermediate number in
%    the decimal digit result form (see \ref{sec:form}).
%    Parameter |#1| consists of the tokens that come before the
%    addition result (see |;#2;| of \cmd{\aa@process}). Then
%    it is also used to store already incremented digits.
%    |#2| contains the next digit in the range of 1 until 26.
%    An empty |#2| marks the end of the number.
%    \begin{macrocode}
  \def\aa@alphinc#1#2.{%
    \ifx\\#2\\%
      \@ReturnAfterElseFi{%
        #11..% ready
      }%
    \else
      \@ReturnAfterFi{%
        \ifnum#2<26 %
          \@ReturnAfterElseFi{%
            \expandafter\aa@alphinclast\expandafter
              {\number\aa@inc{#2}}{#1}%
          }%
        \else
          \@ReturnAfterFi{%
            \aa@alphinc{#11.}%
          }%
        \fi
      }%
    \fi
  }%
%    \end{macrocode}
%    \end{macro}
%    \begin{macro}{\aa@alphinclast}
%    \cmd{\aa@alphinclast} is a help macro. Because |#2| consists of
%    several tokens (e.g. |;100;|), we cannot jump over it via
%    \cmd{\expandafter} in \cmd{\aa@alphinc}.
%    \begin{macrocode}
  \def\aa@alphinclast#1#2{#2#1.}%
%    \end{macrocode}
%    \end{macro}
%
%    \begin{macro}{\newalphalph}
%    \begin{macrocode}
  \newcommand*{\newalphalph}[3]{%
    \PackageError{alphalph}{%
      \string\newalphalph\space requires e-TeX%
    }\@ehc
%    \end{macrocode}
%    \end{macro}
%
% \subsection{\texorpdfstring{Conversion with \eTeX\ features}{\eTeX}}
%    \label{sec:etex}
%    \begin{macrocode}
\else
%    \end{macrocode}
%
%    \begin{macro}{\aa@make}
%    \cmd{\aa@make} catches the cases, if the number is zero or negative.
%    Then it expands to nothing like \cmd{\romannumeral}.
%    \begin{macrocode}
  \def\aa@make#1#2{%
    \ifnum#1<1 %
    \else
      \@ReturnAfterFi{%
        \aa@eprocess#1;#2%
      }%
    \fi
  }%
%    \end{macrocode}
%    \end{macro}
%
%    \begin{macro}{\aa@eprocess}
%    The first argument |#1| contains the number that have to be
%    converted yet, the next argument |#2| the command for making
%    the conversion of a digit (\cmd{\aa@alph} or \cmd{\aa@Alph}).
%    The number is divided by 26 to get the rest. Command
%    |#2| converts the rest to a letter that is put after the arguments
%    of the next call of \cmd{\aa@eprocess}.
%
%    The only feature of \eTeX\ we use the new primitive \cmd{\numexpr}.
%    It provides expandible mathematical calculations.
%    \begin{macrocode}
  \def\aa@eprocess#1;#2{%
    \ifnum#1<27 %
      \@ReturnAfterElseFi{%
        #2{#1}%
      }%
    \else
      \@ReturnAfterFi{%
        \expandafter\aa@eprocess\number\numexpr(#1-14)/26%
          \expandafter\expandafter\expandafter;%
          \expandafter\expandafter\expandafter#2%
          #2{\numexpr#1-((#1-14)/26)*26}%
      }%
    \fi
  }%
%    \end{macrocode}
%    \end{macro}
%
% \subsection{Generic version}
%
%    \begin{macro}{\aa@gen@callmake}
%    See macro \cs{aa@callmake}. Argument |#3| holds the
%    number of available symbols.
%    \begin{macrocode}
  \def\aa@gen@callmake#1#2#3{%
    \expandafter\aa@gen@make\expandafter{\number#3}#1{#2}%
  }%
%    \end{macrocode}
%    \end{macro}
%    \begin{macro}{\aa@gen@make}
%    See macro \cs{aa@make}. Argument |#3| holds the number of
%    available symbols.
%    \begin{macrocode}
  \def\aa@gen@make#1#2#3{%
    \ifnum#1<1 %
    \else
      \@ReturnAfterFi{%
        \aa@gen@eprocess{#3}#1;#2%
      }%
    \fi
  }%
%    \end{macrocode}
%    \end{macro}
%    \begin{macro}{\aa@gen@eprocess}
%    See macro \cs{aa@eprocess}. Argument |#1| holds the number of
%    available symbols.
%    \begin{macrocode}
  \def\aa@gen@eprocess#1#2;#3{%
    \ifnum#2>#1 %
      \@ReturnAfterElseFi{%
        \expandafter\aa@gen@eprocess\expandafter{%
          \number#1\expandafter
        }%
        \number\numexpr(#2-(\aa@half{#1}+1))/#1%
        \expandafter\expandafter\expandafter;%
        \expandafter\expandafter\expandafter#3%
        #3{\numexpr#2-((#2-(\aa@half{#1}+1))/#1)*#1\relax}%
      }%
    \else
      \@ReturnAfterFi{%
        #3{#2}%
      }%
    \fi
  }%
%    \end{macrocode}
%    \end{macro}
%    \begin{macro}{\aa@half}
%    Macro \cs{aa@half} implements integer division by two
%    without rounding.
%    \begin{macrocode}
  \def\aa@half#1{%
    \number\dimexpr.5\dimexpr #1sp\relax\relax
  }%
%    \end{macrocode}
%    \end{macro}
%    \begin{macro}{\newalphalph}
%    New macros are defined by \cs{newalphalph} that act like
%    \cs{alphalph}. The macro to be defined is |#1|. Argument |#2|
%    contains the macro that converts a number to a symbol and
%    argument |#3| holds the number of available symbols.
%    \begin{macrocode}
  \newcommand*{\newalphalph}[3]{%
    \newcommand*{#1}{}%
    \edef#1{%
      \noexpand\aa@gen@callmake\noexpand#2{\number\numexpr#3}%
    }%
  }%
%    \end{macrocode}
%    \end{macro}
%
% \subsection{End\texorpdfstring{ of package}{}}
%    Now we can terminate the differentiation between \TeX\ and \eTeX.
%    \begin{macrocode}
\fi
%    \end{macrocode}
%
%    At the end the catcode of the character |@| is restored.
%    \begin{macrocode}
\catcode`\@=\aa@atcode
%    \end{macrocode}
%    \begin{macrocode}
%</package>
%    \end{macrocode}
% \section{Installation}
%
% \subsection{Download}
%
% \paragraph{Package.} This package is available on
% CTAN\footnote{\url{ftp://ftp.ctan.org/tex-archive/}}:
% \begin{description}
% \item[\CTAN{macros/latex/contrib/oberdiek/alphalph.dtx}] The source file.
% \item[\CTAN{macros/latex/contrib/oberdiek/alphalph.pdf}] Documentation.
% \end{description}
%
%
% \paragraph{Bundle.} All the packages of the bundle `oberdiek'
% are also available in a TDS compliant ZIP archive. There
% the packages are already unpacked and the documentation files
% are generated. The files and directories obey the TDS standard.
% \begin{description}
% \item[\CTAN{macros/latex/contrib/oberdiek/oberdiek-tds.zip}]
% \end{description}
%
% \subsection{Bundle installation}
%
% \paragraph{Unpacking.} Unpack the \xfile{oberdiek-tds.zip} in the
% TDS tree (also known as \xfile{texmf} tree) of your choice.
% Example (linux):
% \begin{quote}
%   |unzip oberdiek-tds.zip -d ~/texmf|
% \end{quote}
%
% \paragraph{Script installation.}
% Check the directory \xfile{TDS:scripts/oberdiek/} for
% scripts that need further installation steps.
% Package \xpackage{attachfile2} comes with the Perl script
% \xfile{pdfatfi.pl} that should be installed in such a way
% that it can be called as \texttt{pdfatfi}.
% Example (linux):
% \begin{quote}
%   |chmod +x scripts/oberdiek/pdfatfi.pl|\\
%   |cp scripts/oberdiek/pdfatfi.pl /usr/local/bin/|
% \end{quote}
%
% \subsection{Package installation}
%
% \paragraph{Unpacking.} The \xfile{.dtx} file is a self-extracting
% \docstrip\ archive. The files are extracted by running the
% \xfile{.dtx} through \plainTeX:
% \begin{quote}
%   \verb|tex alphalph.dtx|
% \end{quote}
%
% \paragraph{TDS.} Now the different files must be moved into
% the different directories in your installation TDS tree
% (also known as \xfile{texmf} tree):
% \begin{quote}
% \sbox0{^^A
% \begin{tabular}{@{}>{\ttfamily}l@{$\quad\rightarrow\quad$}>{\ttfamily}l@{}}
%   alphalph.sty & tex/generic/oberdiek/alphalph.sty\\
%   alphalph.pdf & doc/latex/oberdiek/alphalph.pdf\\
%   alphalph.dtx & source/latex/oberdiek/alphalph.dtx\\
% \end{tabular}^^A
% }%
% \ifdim\wd0>\linewidth
%   \mbox{}\nobreak\hskip0pt minus\leftmargin
%   \usebox0
%   \nobreak\hskip0pt minus\rightmargin
% \else
%   \usebox0
% \fi
% \end{quote}
% If you have a \xfile{docstrip.cfg} that configures and enables \docstrip's
% TDS installing feature, then some files can already be in the right
% place, see the documentation of \docstrip.
%
% \subsection{Refresh file name databases}
%
% If your \TeX~distribution
% (\teTeX, \mikTeX, \dots) relies on file name databases, you must refresh
% these. For example, \teTeX\ users run \verb|texhash| or
% \verb|mktexlsr|.
%
% \subsection{Some details for the interested}
%
% \paragraph{Attached source.}
%
% The PDF documentation on CTAN also includes the
% \xfile{.dtx} source file. It can be extracted by
% AcrobatReader 6 or higher. Another option is \textsf{pdftk},
% e.g. unpack the file into the current directory:
% \begin{quote}
%   \verb|pdftk alphalph.pdf unpack_files output .|
% \end{quote}
%
% \paragraph{Unpacking with \LaTeX.}
% The \xfile{.dtx} chooses its action depending on the format:
% \begin{description}
% \item[\plainTeX:] Run \docstrip\ and extract the files.
% \item[\LaTeX:] Generate the documentation.
% \end{description}
% If you insist on using \LaTeX\ for \docstrip\ (really,
% \docstrip\ does not need \LaTeX), then inform the autodetect routine
% about your intention:
% \begin{quote}
%   \verb|latex \let\install=y\input{alphalph.dtx}|
% \end{quote}
% Do not forget to quote the argument according to the demands
% of your shell.
%
% \paragraph{Generating the documentation.}
% You can use both the \xfile{.dtx} or the \xfile{.drv} to generate
% the documentation. The process can be configured by the
% configuration file \xfile{ltxdoc.cfg}. For instance, put this
% line into this file, if you want to have A4 as paper format:
% \begin{quote}
%   \verb|\PassOptionsToClass{a4paper}{article}|
% \end{quote}
% An example follows how to generate the
% documentation with pdf\LaTeX:
% \begin{quote}
%\begin{verbatim}
%pdflatex alphalph.dtx
%makeindex -s gind.ist alphalph.idx
%pdflatex alphalph.dtx
%makeindex -s gind.ist alphalph.idx
%pdflatex alphalph.dtx
%\end{verbatim}
% \end{quote}
%
% \begin{History}
%   \begin{Version}{1999/03/19 v0.1}
%   \item
%     The first version was built as a response to a
%     \URL{question}^^A
%     {http://www.dejanews.com/[ST_rn=ps]/getdoc.xp?AN=455791936}^^A
%     of \NameEmail{Will Douglas}{william.douglas@wolfson.ox.ac.uk}
%     and the
%     \URL{request}^^A
%     {http://www.dejanews.com/[ST_rn=ps]/getdoc.xp?AN=456358639}^^A
%     of \NameEmail{Donald Arsenau}{asnd@reg.triumf.ca},
%     published in the newsgroup
%     \href{news:comp.text.tex}{comp.text.tex}:
%     \URL{``Re: alph counters \textgreater\ 26''}^^A
%     {http://www.dejanews.com/[ST_rn=ps]/getdoc.xp?AN=456485421}
%   \item
%     Copyright: LPPL (\CTAN{macros/latex/base/lppl.txt})
%   \end{Version}
%   \begin{Version}{1999/04/12 v1.0}
%   \item
%     Documentation added in dtx format.
%   \item
%     \eTeX\ support added.
%   \end{Version}
%   \begin{Version}{1999/04/13 v1.1}
%   \item
%     Minor documentation change.
%   \item
%     First CTAN release.
%   \end{Version}
%   \begin{Version}{1999/06/26 v1.2}
%   \item
%     First generic code about \cmd{\ProvidesPackage} improved.
%   \item
%     Documentation: Installation part revised.
%   \end{Version}
%   \begin{Version}{2006/02/20 v1.3}
%   \item
%     Reload check (for \plainTeX)
%   \item
%     New DTX framework.
%   \item
%     LPPL 1.3
%   \end{Version}
%   \begin{Version}{2006/05/30 v1.4}
%   \item
%     \cs{newalphalph} added.
%   \end{Version}
%   \begin{Version}{2007/04/11 v1.5}
%   \item
%     Line ends sanitized.
%   \end{Version}
% \end{History}
%
% \PrintIndex
%
% \Finale
\endinput