% \iffalse meta-comment
% vim: textwidth=75
%<*internal>
\iffalse
%</internal>
%<*readme>
|
--------:| ----------------------------------------------------------------
nameauth:| Name authority mechanism for consistency in text and index
  Author:| Charles P. Schaum
  E-mail:| charles dot schaum at comcast dot net
 License:| Released under the LaTeX Project Public License v1.3c or later
     See:| http://www.latex-project.org/lppl.txt


Short description:

The nameauth package automates the formatting and indexing of names.
This aids the use of a name authority and the process of textual reordering
and revision without needing to retype name references.

Files		 Distribution

README       This file
nameauth.pdf Documentation

Makefile     Automates building with GNU make 3.81
nameauth.dtx Documented LaTeX file containing both code and documentation

Installation

Unpack nameauth.zip in an appropriate directory.

Note that the instructions below assume that you are using a *nix-
compatible computer. If that is otherwise, you will need to modify
these instructions to your needs.

If you have a make utility compatible with GNU make you can type

	make inst

to install the package into your $TEXMFHOME tree or

	make install

to install the package into your $TEXMFLOCAL tree for all users.

Manually, you can generate the package files. First you generate the
installer driver, README, and style files, with a preliminary PDF:

	pdflatex -shell-escape -recorder -interaction=batchmode nameauth.dtx

Next you generate the PDF with a table of contents and all cross-references
validated, so that the index entries will not move:

	pdflatex --recorder --interaction=nonstopmode nameauth.dtx
	
The next commands generate the glossary/index and final pdf file
	
	makeindex -q -s gglo.ist -o nameauth.gls nameauth.glo
	makeindex -q -s gind.ist -o nameauth.ind nameauth.idx
	pdflatex --recorder --interaction=nonstopmode nameauth.dtx
	pdflatex --recorder --interaction=nonstopmode nameauth.dtx

Normally you create the following manual installation directories for user:

	$TEXMFHOME/source/latex/nameauth		dtx file
	$TEXMFHOME/tex/latex/nameauth			sty file
	$TEXMFHOME/doc/latex/nameauth			pdf file
		
and you create the following manual installation directories for local site:

	$TEXMFLOCAL/source/latex/nameauth		dtx file
	$TEXMFLOCAL/tex/latex/nameauth			sty file
	$TEXMFLOCAL/doc/latex/nameauth			pdf file

The above environment variables often are /usr/local/texlive/texmf-local and
~/texmf.

Run mktexlsr with the appropriate level of permissions to complete the install.

Testing notes:

This packages works and builds with latex, lualatex, pdflatex, and xelatex.
It can be used with makeindex and texindy. The documentation builds with
lualatex, pdflatex, and xelatex, using makeindex.

For testing, the make file permits one to change the typesetting engine
on the command line. The default is to build the package and documentation
with pdflatex. See the make file for details.

License

This material is subject to the LaTeX Project Public License:
http://www.ctan.org/tex-archive/help/Catalogue/licenses.lppl.html

Happy TeXing!
%</readme>
%<*internal>
\fi
\def\nameofplainTeX{plain}
\ifx\fmtname\nameofplainTeX\else
  \expandafter\begingroup
\fi
%</internal>
%<*install>
\input docstrip.tex
\keepsilent
\askforoverwritefalse
\preamble
--------:| ----------------------------------------------------------------
nameauth:| Name authority mechanism for consistency in text and index
  Author:| Charles P. Schaum
  E-mail:| charles dot schaum at comcast dot net
 License:| Released under the LaTeX Project Public License v1.3c or later
     See:| http://www.latex-project.org/lppl.txt

\endpreamble
\postamble

Copyright (C) 2016 by Charles P. Schaum <charles dot schaum at comcast dot net>

This work may be distributed and/or modified under the
conditions of the LaTeX Project Public License (LPPL), either
version 1.3c of this license or (at your option) any later
version.  The latest version of this license is in the file:

http://www.latex-project.org/lppl.txt

This work is "maintained" (as per LPPL maintenance status) by
Charles P. Schaum.

This work consists of the file nameauth.dtx and a Makefile.
Running "make" generates the derived files README, nameauth.pdf and nameauth.sty.
Running "make inst" installs the files in the user's TeX tree.
Running "make install" installs the files in the local TeX tree.

\endpostamble

\usedir{tex/latex/nameauth}
\generate{
  \file{\jobname.sty}{\from{\jobname.dtx}{package}}
}
%</install>
%<install>\endbatchfile
%<*internal>
\usedir{source/latex/nameauth}
\generate{
  \file{\jobname.ins}{\from{\jobname.dtx}{install}}
}
\nopreamble\nopostamble
\usedir{doc/latex/nameauth}
\generate{
  \file{README.txt}{\from{\jobname.dtx}{readme}}
}
\ifx\fmtname\nameofplainTeX
  \expandafter\endbatchfile
\else
  \expandafter\endgroup
\fi
%</internal>
% \fi
%
% \iffalse
%<*driver>
\ProvidesFile{nameauth.dtx}
%</driver>
%<package>\NeedsTeXFormat{LaTeX2e}[1999/12/01]
%<package>\ProvidesPackage{nameauth}
%<*package>
    [2016/01/05 v2.3 Name authority mechanism for consistency in text and index]
%</package>
%<*driver>
\documentclass[11pt]{ltxdoc}
\usepackage[textwidth=135mm,textheight=237mm,right=25mm,nohead]{geometry}
\usepackage[numbered]{hypdoc}
\usepackage{enumitem}
\usepackage{\jobname}
\usepackage[ngerman,american]{babel}
\usepackage{makeidx}
\usepackage{multicol}
\usepackage[toc]{multitoc}
\usepackage{tikz}
\usepackage{ifxetex}
\usepackage{ifluatex}
\usepackage{ifpdf}
\ifxetex
  \usepackage{fontspec}
  \defaultfontfeatures{Mapping=tex-text}
  \usepackage{xunicode}
  \usepackage{xltxtra}
\else
  \ifluatex
    \usepackage{fontspec}
    \defaultfontfeatures{Ligatures=TeX}
  \else
    \usepackage[utf8]{inputenc}
    \usepackage[TS1,T1]{fontenc}
    \usepackage{newunicodechar}
    \usepackage{lmodern}
    \DeclareTextSymbolDefault{\textlongs}{TS1}
    \DeclareTextSymbol{\textlongs}{TS1}{115}
    \newunicodechar{ſ}{\textlongs}
    \newunicodechar{ā}{\=a}
    \newunicodechar{ṃ}{\d m}
  \fi
\fi
\setlist{rightmargin=\leftmargin,itemsep=0pt}
\frenchspacing
\DisableCrossrefs
\CodelineIndex
\RecordChanges
\begin{nameauth}
  \< Wash & George & Washington & >
  \< Soto & Hernando & de Soto & >
  \< JRII & John David & Rockefeller, II & >
  \< JRIV & John David & Rockefeller, IV & >
  \< JayR & John David & Rockefeller, IV & Jay >
  \< Aris & & Aristotle & >
  \< Eliz & & Elizabeth, I & >
  \< Attil & & Attila, the Hun & >
  \< Dagb & & Dagobert & I > 
  \< Konoe & Fumimaro & Konoe & >
  \< Yamt & & Yamamoto, Isoroku & >
  \< Yosh & & Yoshida & Shigeru >
  \< Einstein & Albert & Einstein & >
  \< Cicero & M.T. & Cicero & >
  \< Confucius & & Confucius & >
  \< CBald & & Charles, the Bald & >
  \< Smith & John & Smith & >
  \< JQP & J.Q. & Public & >
  \< Patton & George S. & Patton, Jr. & >
  \< Francis & & Francis, I & >
  \< Dem & & Demetrius, I Soter & >
  \< Sun & & Sun, Yat-sen & >
  \< Plato & & Plato & >
  \< Henry & & Henry & VIII >
  \< Ptol & & Ptolemy & I Soter >
  \< Mao & & Mao & Tse-tung >
  \< DLM & Walter & de la Mare & >
  \< JWG & Johann Wolfgang von & Goethe & >
  \< Harnack & Adolf & Harnack & >
  \< Bier & Johann & Bier\-mann & >
  \< Howell & Thurston & \textsc{Howell},\textsc{III} &>
  \< Fukuyama & & \uppercase{Fukuyama}, Takeshi & >
  \< KempMed & & Thomas, à~Kempis & >
  \< KempW & Thomas & à~Kempis & >
  \< Lewis & Clive Staples & Lewis & C.S. >
  \< Jack & Clive Staples & Lewis & Jack >
\end{nameauth}
\TagName[George]{Washington}{, president|hyperpage}
\TagName[Hernando]{de Soto}{|hyperpage}
\TagName[John David]{Rockefeller, II}{|hyperpage}
\TagName[John David]{Rockefeller, IV}{|hyperpage}
\TagName{Aristotle}{|hyperpage}
\TagName{Elizabeth, I}{, queen|hyperpage}
\TagName{Attila, the Hun}{|hyperpage}
\TagName{Dagobert}[I]{, king|hyperpage}
\TagName[Fumimaro]{Konoe}{, PM\dag|hyperpage}
\TagName{Yamamoto, Isoroku}{|hyperpage}
\TagName{Yoshida}[Shigeru]{, PM|hyperpage}
\TagName[Albert]{Einstein}{|hyperpage}
\TagName[M.T.]{Cicero}{|hyperpage}
\TagName{Confucius}{|hyperpage}
\TagName{Charles, the Bald}{, emperor|hyperpage}
\TagName[George S.]{Patton, Jr.}{|hyperpage}
\TagName{Francis, I}{, king|hyperpage}
\TagName{Demetrius, I Soter}{, king|hyperpage}
\TagName{Sun, Yat-sen}{, president|hyperpage}
\TagName{Plato}{|hyperpage}
\TagName{Henry}[VIII]{, king|hyperpage}
\TagName{Henry, VIII}{, king|hyperpage}
\TagName{Ptolemy I}[Soter]{, king|hyperpage}
\TagName{Mao}[Tse-tung]{, chairman|hyperpage}
\TagName[Walter]{de la Mare}{|hyperpage}
\TagName[Johann Wolfgang von]{Goethe}{|hyperpage}
\TagName[Adolf]{Harnack}{|hyperpage}
\TagName{Antiochus, IV}{ Epiphanes, king|hyperpage}
\TagName{Chiang}[Kai-shek]{, president|hyperpage}
\TagName{Louis, XIV}{, king|hyperpage}
\TagName{Leo, I}{, pope|hyperpage}
\TagName{Gregory, I}{, pope|hyperpage}
\TagName[John]{Smith}{*|hyperpage}
\TagName[J.Q.]{Public}{*|hyperpage}
\TagName[James Earl]{Carter, Jr.}{, president|hyperpage}
\TagName{Jean, sans Peur}{, duke|hyperpage}
\PretagName[E.\,B.]{White}{White, E. B.}
\TagName[E.\,B.]{White}{|hyperpage}
\TagName{Anaximander}{|hyperpage}
\TagName{Arai, Akino}{|hyperpage}
\TagName{Boris, the Animal}{*|hyperpage}
\TagName[Rudolph]{Carnap}{|hyperpage}
\TagName[Patrick]{Cousot}{|hyperpage}
\TagName[Marc van]{Dongen}{|hyperpage}
\TagName[W.E.B.]{Du Bois}{|hyperpage}
\TagName[Charles]{du Fresne}{|hyperpage}
\TagName[George]{Eliot}{|hyperpage}
\TagName[Louis]{Gossett, Jr.}{|hyperpage}
\TagName[Enrico]{Gregorio}{|hyperpage}
\TagName[Oskar]{Hammerstein, II}{|hyperpage}
\TagName[Lafcadio]{Hearn}{|hyperpage}
\TagName[Bob]{Hope}{|hyperpage}
\TagName{Ishida}[Yoko]{|hyperpage}
\TagName{John, Eriugena}{|hyperpage}
\TagName[Yoko]{Kanno}{\dag|hyperpage}
\TagName[Martin Luther]{King, Jr.}{|hyperpage}
\TagName[The Amazing]{Kreskin}{|hyperpage}
\TagName{Lao-tzu}{|hyperpage}
\TagName[Uwe]{Lueck}{|hyperpage}
\TagName[Dan]{Luecking}{|hyperpage}
\TagName{Maimonides}{|hyperpage}
\TagName[Nicolas]{Malebranche}{|hyperpage}
\TagName[J.S.]{Mill}{|hyperpage}
\TagName[Aiko]{Nakano}{\dag|hyperpage}
\TagName{Nogawa}[Sakura]{|hyperpage}
\TagName[Heiko]{Oberdiek}{|hyperpage}
\TagName{Rambam}{|hyperpage}
\TagName[Robert]{Schlicht}{|hyperpage}
\TagName{Shikata, Akiko}{|hyperpage}
\TagName[Rudolph]{Snel van Royen}{|hyperpage}
\TagName[Willebrord]{Snel van Royen}{|hyperpage}
\TagName[Philipp]{Stephani}{|hyperpage}
\TagName[John]{Strietelmeier}{|hyperpage}
\TagName[Johann]{Bier\-mann}{*|hyperpage}
\TagName[Chesley B.]{Sullenberger, III}{|hyperpage}
\TagName{Thomas, Aquinas}{|hyperpage}
\TagName[Mark]{Twain}{|hyperpage}
\TagName[Mike]{Tyson}{|hyperpage}
\TagName{Vlad II, Dracul}{|hyperpage}
\TagName{Vlad III, Dracula}{|hyperpage}
\TagName{Voltaire}{|hyperpage}
\TagName{Yohko}{|hyperpage}
\TagName[Johann]{Andreä}{|hyperpage}
\PretagName{Æthelred, II}{Aethelred 2}
\TagName{Æthelred, II}{, king|hyperpage}
\PretagName[Jan]{Łukasiewicz}{Lukasiewicz, Jan}
\TagName[Jan]{Łukasiewicz}{|hyperpage}
\PretagName{Vlad, Ţepeş}{Vlad Tepes}
\TagName[Patrick]{Cousot}{|hyperpage}
\PretagName[Greta]{\textsc{Garbo}}{Garbo, Greta}
\TagName[Greta]{\textsc{Garbo}}{|hyperpage}
\PretagName[Thurston]{\textsc{Howell},\textsc{III}}{Howell, Thurston 3}
\TagName[Thurston]{\textsc{Howell},\textsc{III}}{*|hyperpage}
\PretagName{\uppercase{Fukuyama}, Takeshi}{Fukuyama, T}
\TagName{\uppercase{Fukuyama}, Takeshi}{|hyperpage}
\PretagName{Thomas, à~Kempis}{Thomas a Kempis}
\TagName{Thomas, à~Kempis}{|hyperpage}
\TagName[Clive Staples]{Lewis}{|hyperpage}
\PretagName[Heinz]{\textsc{Rühmann}}{Ruehmann, Heinz}
\TagName[Heinz]{\textsc{Rühmann}}{|hyperpage}
\PretagName[Heinrich Wilhelm]{\textsc{Rühmann}}{Ruehmann, Heinrich Wilhelm}
\TagName{William, I}{|hyperpage}
\TagName[Charlie]{Chaplin}{|hyperpage}
\IndexActual{=}
\begin{document}
  \DocInput{\jobname.dtx}
\end{document}
%</driver>
% \fi
%
% \CheckSum{2989}
%
% \CharacterTable
%  {Upper-case    \A\B\C\D\E\F\G\H\I\J\K\L\M\N\O\P\Q\R\S\T\U\V\W\X\Y\Z
%   Lower-case    \a\b\c\d\e\f\g\h\i\j\k\l\m\n\o\p\q\r\s\t\u\v\w\x\y\z
%   Digits        \0\1\2\3\4\5\6\7\8\9
%   Exclamation   \!     Double quote  \"     Hash (number) \#
%   Dollar        \$     Percent       \%     Ampersand     \&
%   Acute accent  \'     Left paren    \(     Right paren   \)
%   Asterisk      \*     Plus          \+     Comma         \,
%   Minus         \-     Point         \.     Solidus       \/
%   Colon         \:     Semicolon     \;     Less than     \<
%   Equals        \=     Greater than  \>     Question mark \?
%   Commercial at \@     Left bracket  \[     Backslash     \\
%   Right bracket \]     Circumflex    \^     Underscore    \_
%   Grave accent  \`     Left brace    \{     Vertical bar  \|
%   Right brace   \}     Tilde         \~}
%
% \changes{v0.7}{2011/12/26}{Initial release}
% \changes{v0.8}{2012/01/29}{Add features, bugfixes}
% \changes{v0.85}{2012/02/05}{Add package options}
% \changes{v0.86}{2012/02/06}{Fix regressions}
% \changes{v0.9}{2012/02/10}{Add first name formatting; affix handling expandable}
% \changes{v0.94}{2012/02/15}{Add index suppression, error checking, name particle caps}
% \changes{v0.95}{2012/02/17}{Bugfixes}
% \changes{v0.96}{2012/02/19}{Bugfixes}
% \changes{v1.0}{2012/02/20}{Works fully with \textsf{microtype} and \textsf{memoir}}
% \changes{v1.1}{2012/03/08}{Bugfixes}
% \changes{v1.4}{2012/07/24}{Add features, bugfixes}
% \changes{v1.5}{2013/02/22}{Add features, bugfixes, options}
% \changes{v1.6}{2013/03/10}{Add |nameauth| environment}
% \changes{v1.7}{2013/04/02}{Fix options processing}
% \changes{v1.8}{2013/09/19}{Update docs}
% \changes{v1.9}{2015/07/09}{Better Eastern name support; fix |nameauth| bugs, global un-tagging}
% \changes{v2.0}{2015/11/11}{Use dtxgen template instead of dtxtut; update docs}
% \changes{v2.1}{2015/11/24}{Isolate Unicode issues}
% \changes{v2.2}{2015/12/01}{Add interface hooks and docs; fix bugs}
% \changes{v2.3}{2016/01/05}{Improve docs and hooks; add features}
% \GetFileInfo{\jobname.dtx}
% \DoNotIndex{\@empty, \@gobble, \@period, \@token, \trim@spaces, \zap@space}
% \DoNotIndex{\begingroup, \bfseries, \bgroup, \csdef, \csgdef, \csname, \csundef, \DeclareOption, \def, \detokenize, \edef, \egroup, \else, \endcsname, \endgroup, \endinput, \ExecuteOptions, \expandafter, \fi, \futurelet, \global, \hbox, \if, \ifcsname, \ifx, \ignorespaces, \index, \itshape, \leavevmode, \let, \newcommand, \newcommandx, \newenvironment, \newif, \nobreakspace, \PackageError, \PackageWarning, \ProcessOptions, \relax, \renewcommand, \RequirePackage, \scshape, \space, \textbackslash, \uppercase}
%
%\title{\textsf{nameauth} --- Name authority mechanism for consistency in text and index\thanks{This file
%   describes version \fileversion, last revised \filedate.}
%}
%\author{Charles P. Schaum\thanks{E-mail: charles dot schaum at comcast dot net}}
%\date{Released \filedate}
%
%\maketitle
%
% \begin{abstract}
% \noindent The \textsf{nameauth} package automates the formatting and indexing of names. This aids the use of a \textbf{name authority} and the process of textual reordering and revision without needing to retype name references.
% \end{abstract}
%
% {\small\tableofcontents}
% \setlength{\parskip}{0.15\baselineskip plus .15\baselineskip minus .15\baselineskip}
%
% \noindent This manual is designed to be compatible with A4 and US letter. Macro references are minimized for a ``clean'' index, showing how \textsf{nameauth} handles indexing.\clearpage
%
% \section{Introduction}
%
% \subsection{Preliminaries}
%
% When publications use hundreds of names, it takes time and money to check them. This package automates much of that work. \textbf{Context determines name forms} unless otherwise modified, meaning that \textbf{you usually do not have to retype names} when editing a document. You can \textbf{implement a name authority} that allows for name variants in the text and consistent index entries. With \textsf{nameauth} you can handle some \textbf{cross-cultural naming conventions.} Additionally, you can use \textbf{index sort keys and tags} automatically after assigning them.
%
% This package grew from generalized needs for translating old German and Latin texts. Design principles include:
% \begin{enumerate}\small
% \item Format and vary name forms according to standard syntax in the body text, independent of the index.
% \begin{itemize}[noitemsep]
%   \item Default to long name references first, then shorter ones.
%   \item Use alternate names only in the body text, not the index.
%   \item Perform name caps and reversing only in the body text.
% \end{itemize}
% \item Perform typographic formatting of names only in the body text. Reflect source text typography with English conventions, but only \emph{after} syntactic formatting is complete.
% \item Allow typographic formatting to be customized and permit control sequences in names (Sections~\ref{sec:accents}, \ref{sec:formatting}, and~\ref{sec:IndexSort}) to allow Continental and non-English standards.
% \item Always aim to reduce keystrokes.
% \item Accommodate the broadest set of names while minimizing keystrokes.
% \end{enumerate}
%
% This manual performs something of a ``torture test'' on this package. You might want to avoid doing that if you are a beginner.
%
% \textsf{Nameauth} depends on \textsf{etoolbox}, \textsf{ifxetex}, \textsf{ifluatex}, \textsf{suffix}, \textsf{trimspaces}, and \textsf{xargs}. It was tested with \texttt{latex,} \texttt{lualatex,} \texttt{pdflatex,} and \texttt{xelatex,} along with \texttt{makeindex} and \texttt{texindy.} This manual was typeset with \ifxetex\texttt{xelatex}\else\ifluatex\ifpdf\texttt{lualatex} in \texttt{pdf} mode\else\texttt{lualatex} in \texttt{dvi} mode\fi\else\ifpdf\texttt{pdflatex}\else\texttt{latex}\fi\fi\fi{} using \texttt{makeindex} and \texttt{gind.ist.}
%
% Indexing generally conforms to the standard in Nancy C. Mulvany, \emph{Indexing Books} (Chicago: University of Chicago Press, 1994). This should be suitable for a very wide application across a number of disciplines. 
%
% Thanks to \Name[Marc van]{Dongen}, \Name[Enrico]{Gregorio}, \Name[Philipp]{Stephani},\break \Name[Heiko]{Oberdiek}, \Name[Uwe]{Lueck}, and \Name[Robert]{Schlicht} for their assistance in the early versions of this package.\vfill
%
% \bgroup\setlength{\fboxsep}{5pt}\noindent\fbox{\parbox{0.97\textwidth}{\small\strut This documentation uses names of living and historical figures because users refer to real people. At no time do I intend any disrespect or statement of bias regarding any particular person, culture, or tradition. All names are used only for teaching purposes.}}\egroup
%\clearpage
%
% \subsection{What's In A Name?}
% \label{sec:NameTypes}
%
% Name forms are ambiguous apart from historical and cultural contexts. The \textsf{nameauth} package helps you encode names from as many contexts as possible.
%
% In this manual we refer to three classes of names. A ``surnames'' argument, \meta{SNN}, denotes a ``required name,'' that is, a Western surname, an Eastern family name, or an ancient/medieval name.\footnote{Some professional literature speaks of forenames and optional surnames. See Mulvany, \emph{Indexing Books}, pages 152--82, which I used as a guide along with the \emph{Chicago Manual of Style}. That approach does not work in \LaTeX, where we use optional forenames for the same effect.}
% Other naming systems can be adapted to these categories, \emph{e.g.}, Icelandic, Hungarian, etc.
%
% Professional writing often calls for the full form of a person's name to be used in its first occurrence, with shorter forms used thereafter. This package adapts that principle to all the forms below.
%
%\begin{enumerate}[noitemsep]
%\item Western name:\\[1ex]
%\begin{tikzpicture}[line/.style={draw,thick}]\normalsize
%  \node [matrix] (macro) at (0,1)
%  {
%    \node(space){\qquad\qquad\qquad}; &
%    \node(arg1){\strut\textbf{Forename(s)}}; &
%    \node(arg2){\strut\textbf{Surname(s)}}; &
%    \node(arg3){\strut\textbf{Sobriquet, etc.}};\\
%  };
%  \node [matrix,column sep=1em] (tipsii) at (1,-2)
%  {
%    \node[align=left](a1)
%    {
%      Personal name(s):\\
%      \textit{baptismal name}\\
%      \textit{Christian name}\\
%      \textit{first and middle}\\\quad\textit{names}\\
%      \textit{praenomen}
%    }; &
%    \node[align=left](a2)
%    {
%      Family designator:\\
%      \textit{father's family}\\
%      \textit{mother's family}\\
%      \textit{ancestor}\\
%      \textit{occupation}\\
%      \textit{place of origin}\\
%      \textit{territory}\\
%      \textit{nomen/cognomen}\\
%      \textit{patronym}
%    }; &
%    \node[align=left](a3)
%    {
%      Sobriquet / title:\\
%      \textit{senior, junior, III\dots}\\
%      \textit{notable feature}\\
%      \textit{notable attribute}\\
%      \textit{place of origin}\\
%      \textit{territory}\\
%      \textit{agnomen}
%    }; \\
%  };
%  \begin{scope}[every path/.style=line]
%    \path (arg1) -- (a1);
%    \path (arg2) -- (a2);
%    \path (arg3) -- (a3);
%  \end{scope}
%\end{tikzpicture}
%\item Eastern name:\\[1ex]
%\begin{tikzpicture}[line/.style={draw,thick}]\normalsize
%  \node [matrix] (macro) at (0,1)
%  {
%    \node(spacei){\qquad\qquad\qquad}; &
%    \node(arg1){\strut\textbf{Family name}}; &
%    \node(spaceii){\qquad}; &
%    \node(arg2){\strut\textbf{Given name}};\\
%  };
%  \node [matrix,column sep=1cm] (tipsii) at (2,-1)
%  {
%    \node[align=left](a1)
%    {
%      Family\\ designator
%    }; &
%    \node[align=left](a2)
%    {
%      (Multiple names are rare, but multi-\\character names do exist.)
%    };\\
%  };
%  \begin{scope}[every path/.style=line]
%    \path (arg1) -- (a1);
%    \path (arg2) -- (a2);
%  \end{scope}
%\end{tikzpicture}
%\item Ancient name:\\[1ex]
%\begin{tikzpicture}[line/.style={draw,thick}]\normalsize
%  \node [matrix] (macro) at (0,1)
%  {
%    \node(spacei){\qquad\qquad\qquad}; &
%    \node(arg1){\strut\textbf{Given name}}; &
%    \node(spaceii){\qquad}; &
%    \node(arg2){\strut\textbf{Sobriquet, etc.}};\\
%  };
%  \node [matrix,column sep=2.2cm] (tipsii) at (1.5,-1.5)
%  {
%    \node[align=left](a1)
%    {
%      Personal\\ name
%    }; &
%    \node[align=left](a2)
%    {
%      Sobriquet / title:\\
%      \textit{senior, junior, III\dots}\\
%      \textit{notable feature}\\
%      \textit{notable attribute}\\
%      \textit{place of origin}\\
%      \textit{territory}
%    }; \\
%  };
%  \begin{scope}[every path/.style=line]
%    \path (arg1) -- (a1);
%    \path (arg2) -- (a2);
%  \end{scope}
%\end{tikzpicture}
%\end{enumerate}
%\clearpage
%
% \section{Usage}
%
% \subsection{Package Options}
% \label{sec:options}
%
% |\usepackage[|\meta{$option_1$}|,|\meta{$option_2$}|,|\dots|]{nameauth}|\medskip
%
% \noindent From the user's perspective these options proceed from the most general to more specific details. Package options address the following:
% \begin{enumerate}
% \item Enable or disable features (formatting, indexing, index sorting) 
% \item Affect the syntax of names (commas, capitalization, and reversing)
% \item Typographic display of names (formatted or not, and how)
% \end{enumerate}
% {\hrulefill\bfseries Default options are in boldface.\hrulefill}
%
% \begin{center}\Large\bfseries Enable/Disable Features\end{center}
%
% \noindent{\large\bfseries Enable/Disable Formatting}\\[2ex]
% \begin{tabular}{p{0.22\textwidth}p{0.6\textwidth}}
% \quad\bfseries\texttt{mainmatter} & \bfseries Enable typographic formatting attributes (see formatting options below), starting at the beginning of a document.\\[1ex]
% \quad\texttt{frontmatter} & Disable typographic formatting, but retain automatic full and short forms.\\[2ex]
% \end{tabular}\\
% The default |mainmatter| option starts formatting names immediately. Use the |frontmatter| option to suppress name formatting until you want it to start via \cmd{\NamesActive}. These options have no additional effects on the index, but they implement two completely separate systems of first/subsequent names. These systems manage names in separate contexts. See Section~\ref{sec:DisableFormat}.\bigskip
%
% \noindent{\large\bfseries Enable/Disable Indexing}\\[2ex]
% \begin{tabular}{p{0.22\textwidth}p{0.6\textwidth}}
% \quad\bfseries\texttt{index} & \bfseries Create index entries in place with names.\\[1ex]
% \quad\texttt{noindex} & Suppress indexing of names.\\[2ex]
% \end{tabular}\\
% The default |index| option enables name indexing right away. The |noindex| option disables the indexing of names until \cmd{\IndexActive} enables it. That can affect the use of index tags. This applies only to naming and indexing macros in the \textsf{nameauth} package. See Section~\ref{sec:SectionIndex}.\bigskip
%
% \noindent{\large\bfseries Enable/Disable Index Sorting}\\[2ex]
% \begin{tabular}{p{0.22\textwidth}p{0.6\textwidth}}
% \quad\bfseries\texttt{pretag} & \bfseries Create sort keys used with \texttt{makeindex}.\\[1ex]
% \quad\texttt{nopretag} & Do not create sort keys. \\[2ex]
% \end{tabular}\\
% The default allows \cmd{\PretagName} to create sort keys used in \texttt{makeindex} / \texttt{texindy}. Seldom would one change this option. See Section~\ref{sec:IndexSort}.\clearpage
%
% \begin{center}\Large\bfseries Affect the Syntax of Names\end{center}
%
%\noindent{\large\bfseries Show/Hide Affix Commas}\\[2ex]
% \begin{tabular}{p{0.22\textwidth}p{0.6\textwidth}}
% \quad\bfseries\texttt{nocomma} & \bfseries Suppress commas between surnames and affixes, following the \emph{Chicago Manual of Style} and other conventions.\\[1ex]
% \quad\texttt{comma} & Retain commas between surnames and affixes.\\[2ex]
% \end{tabular}\\
% This option is set at load time. If you use \emph{modern standards} or Eastern names, choose the default |nocomma| option to get, \emph{e.g.}, \Name[James Earl]{Carter, Jr.}.
%
% If you need to adopt \emph{older standards} that use commas between surnames and affixes, you have two choices:
% \begin{enumerate}
% \item The \texttt{comma} option produces, \emph{e.g.}, \ForgetName[James Earl]{Carter, Jr.}\ShowComma\Name[James Earl]{Carter, Jr.}. Yet it limits the use of macros like \cmd{\AKA} and \cmd{\PName} and it prevents the use of Eastern and ancient names with the new syntax.\footnote{Before version 0.9 the \textsf{nameauth} package assumed the \texttt{comma} option by default and used the old syntax to encode names. Newer versions are backward-compatible.}
% \item Section~\ref{sec:Affix} shows how one can use \cmd{\ShowComma} with the |nocomma| option to get similar results, but with more flexibility.
% \end{enumerate}\medskip
%
% \noindent{\large\bfseries Capitalize Entire Surnames}\\[2ex]
% \begin{tabular}{p{0.22\textwidth}p{0.6\textwidth}}
% \quad\bfseries\texttt{normalcaps} & \bfseries Do not perform any special capitalization.\\[1ex]
% \quad\texttt{allcaps} & Capitalize entire surnames, such as romanized Eastern names.\\[2ex]
% \end{tabular}\\
% This only affects names printed in the body text. One of the design principles of this package keeps it consistent with English typography and syntax. Thus no syntactic or typographic changes are propagated into the index by default.
%
% Still, you can use this package with different conventions that involve both syntax and formatting. You can type in capitalized family names directly to get that effect. See also Section~\ref{sec:formatting} on how to use macros to get caps (\cmd{\uppercase}) or small caps (\cmd{\textsc}) in both the body text and the index. This becomes easy with the simplified interface.
%
% Section~\ref{sec:Eastern} deals with capitalization on a section-level and per-name basis.\bigskip
%
% \noindent{\large\bfseries Reverse Name Order}\\[2ex]
% \begin{tabular}{p{0.22\textwidth}p{0.6\textwidth}}
% \quad\bfseries\texttt{notreversed} & \bfseries Print names in the order specified by \cmd{\Name} and the other macros.\\[1ex]
% \quad\texttt{allreversed} & Print name forms in ``smart'' reverse order.\\[1ex]
% \quad\texttt{allrevcomma} & Print all names in ``Surname, Forenames'' order, meant for Western names.\\[2ex]
% \end{tabular}\\
% See Section~\ref{sec:Eastern} for related macros to control name reversing by section or by name. This also affects how Eastern names will appear in the index.
%
% So-called ``last-comma-first'' lists of names via \texttt{allrevcomma} (Section~\ref{sec:LastFirst}) are \emph{not} the same as the \texttt{comma} option. They are designed for Western names.\clearpage
%
% \begin{center}\Large\bfseries Typographic Display of Names\end{center}
%
% Section~\ref{sec:formatting} explains in greater detail that typographic display is different from the syntactic formatting of names and occurs after syntactic formatting is complete. This package is designed with type hierarchies in mind. See Robert Bringhurst, \emph{The Elements of Typographic Style}, version 3.2 (Point Roberts, Washington: Hartley \& Marks, 2008), 53--60.
%
% Even though English typography was the design choice due to native access (for me) and global reach (thanks, England), a stint in Germany helped to make me aware of continental typography. Especially in recent versions, one can adapt this package for use in Continental and other typographic standards, as Section~\ref{sec:formatting} discusses. One must use sort tags, as Section~\ref{sec:IndexSort} explains.
%
% Continental standards require you to know the surname in advance and draw formatting into the syntactic elements of the surname. By default, \textsf{nameauth} uses a ``serendipitous ambiguity'' of ancient, Eastern, and suffixed name forms handled by the \meta{Surname, affix} pattern that is resolved subtly by several factors. I burden Continental users with a few more keystrokes in order to minimize keystrokes among the broadest group of users and names.
%
% If you intend to use this package for Continental publishing where the surname is formatted with small caps in the running text and the index, use the |noformat| option. Otherwise, the options below are meant generally for applications in English typography. The default is |smallcaps| because this package was developed to aid my editing and translation of older German and Latin documents into English. I do apologize for any inconvenience in design choices.\bigskip
%
% \noindent{\large\bfseries Formatting Attributes}\\[2ex]
% \begin{tabular}{p{0.22\textwidth}p{0.6\textwidth}}
% \quad\texttt{alwaysformat} & If formatting is enabled by the |mainmatter| option or by \cmd{\NamesActive}, this option causes all names to have typographic formatting applied to them, whether first or subsequent uses.\\[1ex]
% \quad\bfseries\texttt{smallcaps} & \bfseries Set the first use of a name in small caps.\\[1ex]
% \quad\texttt{italic} & Italicize the first occurrence of a name.\\[1ex]
% \quad\texttt{boldface} & Set the first use of a name in boldface.\\[1ex]
% \quad\texttt{noformat} & Do not define a default format. Can be used with custom formatting.\\[2ex]
% \end{tabular}\\
%
% Section~\ref{sec:formatting} offers even more possibilities for presenting the first use of names. That includes typographic formatting that also adds names in margins.\footnote{Two books that helped my thinking about such typographic concepts include Bernhard Lohse, \emph{Luthers Theologie} (G\"ottingen: Vandenhoeck \& Ruprecht, 1995) and the five-volume series by Jaroslav J. Pelikan Jr., The Christian Tradition: A History of the Development of Doctrine (Chicago: Chicago UP, 1971--89). Each volume in the series has its own title.\\\indent\quad Given the use of small caps in the text and index in Lohse's volume, I looked at several possibilities and arrived at the current solution for Continental users. Pelikan's volumes pointed me to the idea of a typographic first use of names that could well be served by a margin paragraph. Being a history enthusiast, I implemented that design idea in this manual.}
% This allows one to implement some creative solutions for presenting names.
% \clearpage
%
% \subsection{Quick Start Guide}
% \label{sec:start}
%
%\subsubsection{Main Interface}
% See Section~\ref{sec:Naming} for a proper description of \cmd{\Name}. Here we see briefly how to work with the classes of names in Section~\ref{sec:NameTypes}. We abbreviate the macro arguments \meta{forename(s)} with \meta{FNN} and \meta{surname(s)} with \meta{SNN}. Use the |nocomma| option especially when using Eastern names and ancient names.\bigskip
%
% \noindent{\large\bfseries Western Names}
% \begin{quote}
% \begin{tikzpicture}[line/.style={draw,thick}]
%   \node [matrix,column sep=2.5cm] (tipsi) at (1.5,2.5)
%   {
%     \node(opt){\small Add to force full name.}; &
%     \node[text width=3.5cm,align=left](grp){\small Add only if text in brackets |[ ]| follows.}; \\
%   };
%   \node [matrix] (macro) at (1.1,1)
%   {
%     \node(cmd){\bfseries\cmd{\Name}}; &
%     \node(star){\bfseries\texttt{*}}; &
%     \node(arg1){\bfseries\bfseries\oarg{FNN}}; &
%     \node(arg2){\bfseries\bfseries\marg{SNN}}; &
%     \node(arg3){\bfseries\oarg{Alternate names}}; &
%     \node(braces){\bfseries|{}|}; \\
%   };
%   \node [matrix,column sep=1em] (tipsii) at (1,-1)
%   {
%     \node[align=center](a1)
%     {
%       Forename(s)\\used in index
%     }; & & &
%     \node[align=center](a2)
%     {
%       Surname(s)\\Surname(s)|,| affix\\``required name''
%     }; & &
%     \node[align=center](a3)
%     {
%       \meta{empty}\\Nickname(s)\\Full forenames, etc.
%     }; \\
%   };
%   \begin{scope}[every path/.style=line]
%     \path (opt) -- (star);
%     \path (grp) -- (braces);
%     \path (arg1) -- (a1);
%     \path (arg2) -- (a2);
%     \path (arg3) -- (a3);
%   \end{scope}
% \end{tikzpicture}\\
% Usual forms:\\[2ex]\small
% \cmd{\Name}\oarg{FNN}\marg{SNN}\hfill|\Name[George]{Washington}|\IndexName[George]{Washington}\\
% \cmd{\Name}\oarg{FNN}\marg{SNN|,| affix}\hfill|\Name[John David]{Rockefeller, II}|\IndexName[John David]{Rockefeller, II}\\[2ex]
% You must include the \meta{FNN} field with alternate forenames. The \meta{Alternate names} are swapped with the \meta{FNN}, but only in the body text:\\[1ex]
% \cmd{\Name}\oarg{FNN}\marg{SNN}\oarg{Alternate names}\\\hbox{}\hfill |\Name[Bob]{Hope}[Leslie Townes]|\IndexName[Bob]{Hope}\\\hbox{}\hfill |\Name[Clive Staples]{Lewis}[C.S.]|\IndexName[Clive Staples]{Lewis}\\
% \cmd{\Name}\oarg{FNN}\marg{SNN|,| affix}\oarg{Alternate names}\\\hbox{}\hfill |\Name[John David]{Rockefeller, IV}[Jay]|\IndexName[John David]{Rockefeller, IV}\\[2ex]\normalsize
% The older syntax is \cmd{\Name}\marg{SNN}\oarg{affix}. See Section~\ref{sec:obsolete} for its usage and its shortcomings. It remains for backward compatibility.
% \end{quote}\medskip
%
% \noindent{\large\bfseries Eastern Names in the Text, Western-style Index}
% \begin{quote}
% \begin{tikzpicture}[line/.style={draw,thick}]
%   \node [matrix,column sep=1.5cm] (tipsi) at (0.5,2)
%   {
%     \node(opt){\small Add to force full name.}; &
%     \node[text width=3.5cm,align=left](grp){\small Add only if text in brackets |[ ]| follows.}; \\
%   };
%   \node [matrix] (macro) at (0,1)
%   {
%     \node(cmd){\bfseries\cmd{\Name}}; &
%     \node(star){\bfseries\texttt{*}}; &
%     \node(arg1){\bfseries\oarg{FNN}}; &
%     \node(arg2){\bfseries\marg{SNN}}; &
%     \node(braces){\bfseries|{}|}; \\
%   };
%   \node [matrix] (tipsii) at (0.5,0)
%   {
%     \node(a1)
%     {
%       \quad Given name
%     }; &
%     \node(a2)
%     {
%       \quad Family name
%     }; \\
%   };
%   \begin{scope}[every path/.style=line]
%     \path (opt) -- (star);
%     \path (grp) -- (braces);
%     \path (arg1) -- (a1);
%     \path (arg2) -- (a2);
%   \end{scope}
% \end{tikzpicture}\\
% Technically, these are Western name forms without affixes. The reversing macros (Section~\ref{sec:Eastern}) cause them to display in Eastern order in the body text only. The index entries are Western in fashion: \meta{SNN}, \meta{FNN}. This ``non-native'' form of Eastern names excludes both comma-delimited forms and the old syntax.
% \end{quote}
% \clearpage
%
% \noindent{\large\bfseries Eastern Names in the Text, Eastern-style Index}
% \begin{quote}
% \begin{tikzpicture}[line/.style={draw,thick}]
%   \node [matrix,column sep=1cm] (tipsi) at (0.5,2)
%   {
%     \node(opt){\small Add to force full name.}; &
%     \node[text width=3.5cm,align=left](grp){\small Add only if text in brackets |[ ]| follows.}; \\
%   };
%   \node [matrix] (macro) at (0,1)
%   {
%     \node(cmd){\bfseries\cmd{\Name}}; &
%     \node(star){\bfseries\texttt{*}}; &
%     \node(arg1){\bfseries\marg{SNN, FNN}}; &
%     \node(braces){\bfseries|{}|}; \\
%   };
%   \node [matrix,column sep=1em] (tipsii) at (0.5,0)
%   {
%     \node(a1)
%     {
%       \quad Family name
%     }; &
%     \node(a2)
%     {
%       \quad Given name
%     }; \\
%   };
%   \begin{scope}[every path/.style=line]
%     \path (opt) -- (star);
%     \path (grp) -- (braces);
%     \path (arg1) -- (a1);
%     \path (arg1) -- (a2);
%   \end{scope}
% \end{tikzpicture}\\
% Usual form:\\[2ex]\small
% \cmd{\Name}\marg{SNN, FNN}\hfill|\Name{Yamamoto, Isoroku}|\IndexName{Yamamoto, Isoroku}\\[2ex]
% These names truly are Eastern names. They take the form \meta{SNN FNN} in the index even if the reversing macros (Section~\ref{sec:Eastern}) put the names in Western order in the body text. We call this the ``native'' Eastern form.\\[2ex]\normalsize
% The old form of Eastern names is \cmd{\Name}\marg{SNN}\oarg{FNN}. Again, this is retained only for backward compatibility. Cf. Section~\ref{sec:obsolete}.
% \end{quote}\medskip
%
% \noindent{\large\bfseries Ancient Names}
% \begin{quote}
% \begin{tikzpicture}[line/.style={draw,thick}]
%   \node [matrix,column sep=1em] (tipsi) at (2,2)
%   {
%     \node(opt){\quad\small Add to force full name.}; &
%     \node[text width=2.6cm,align=left](a1){\small Mononym\hfil\break Mononym, affix}; &
%     \node[text width=3.3cm,align=left](grp){\small Add only if text in brackets |[ ]| follows.}; \\
%   };
%   \node [matrix] (macro) at (1,1)
%   {
%     \node(cmd){\bfseries\cmd{\Name}}; &
%     \node(star){\bfseries\texttt{*}}; &
%     \node(arg1){\bfseries\marg{SNN}};  &
%     \node(braces){\bfseries|{}|}; \\
%   };\\
%   \begin{scope}[every path/.style=line]
%     \path (opt) -- (star);
%     \path (grp) -- (braces);
%     \path (arg1) -- (a1);
%   \end{scope}
% \end{tikzpicture}
% Usual form:\\[2ex]\small
% \cmd{\Name}\marg{SNN}\hfill|\Name{Aristotle}|\IndexName{Aristotle}\\
% \cmd{\Name}\marg{SNN, affix}\hfill|\Name{Elizabeth, I}|\IndexName{Elizabeth, I}\\
% \hbox{}\hfill|\Name{Attila, the Hun}|\IndexName{Attila, the Hun}\\[2ex]\normalsize
% These forms are used for royalty, ancient figures, and other monomyms with or without suffixes.\footnote{Technically, the native Eastern forms and the \meta{Mononym, affix} forms are identical, although used in different contexts. You would not wish to reverse a royal name, for example.}
% The older syntax takes the form \cmd{\Name}\marg{Mononym}\oarg{affix}. Cf. Section~\ref{sec:obsolete}.
% \end{quote}
%
% The main interface allows one to use \cmd{\Name}\meta{arguments} as a base for many other package macros. For example, all these are variants of a base pattern, where \meta{prefix macro} consist of one or more of \cmd{\CapThis,} \cmd{\CapName,} \cmd{\RevName,} \cmd{\RevComma,} \cmd{\ShowComma,} and \cmd{\KeepAffix:}
%
% \begin{center}\small
% \begin{tabular}{r@{\,}r@{}c@{\,}c@{ }l}
% \meta{prefix macro} & \cmd{\Name} & & \meta{arguments} \\
% \meta{prefix macro} & \cmd{\Name} & |*| & \meta{arguments} \\
% \meta{prefix macro} & \cmd{\FName} & & \meta{arguments} \\\hline
% & \cmd{\IndexName} & & \meta{arguments} \\
% & \cmd{\ForgetName} & & \meta{arguments} \\
% & \cmd{\SubvertName} & & \meta{arguments} \\
% & \cmd{\PretagName} & & \meta{arguments} & \meta{sort key}\\
% & \cmd{\TagName} & & \meta{arguments} & \meta{tag}\\
% & \cmd{\UntagName} & & \meta{arguments} \\
% & \cmd{\ExcludeName} & & \meta{arguments} \\
% \end{tabular}
% \end{center}
% \clearpage
%
% \subsubsection{Simplefied Interface}
% \label{sec:simplestart}%
%
% \DescribeEnv{nameauth}
% The |nameauth| environment allows one to save typing and aid consistency by using shorthands. It replaces the use of \cmd{\Name,} \cmd{\Name*,} and \cmd{\FName,} but not the other naming macros. Thus one must remain aware of the main interface.
%
% The simplified interface produces control sequences that are fully compatible with the main interface. Although not required, |nameauth| is best used in the document preamble to avoid undefined control sequences.\footnote{The |nameauth| environment uses \cmd{\ignorespaces} to mitigate the need for trailing \texttt{\%.}} The italicized comments at right are not part of the example proper, but are there for explanation. Macro fields have uniform widths only to help compare argument types.
%
% \begin{quote}\small
% |\begin{nameauth}|\\
% |  \<| \meta{cseq1} |&| \meta{FNN} |&| \meta{SNN}\hphantom{\textit{affix, }} |& >|\hfill\emph{Western}\footnote{This is also the form used with ``non-native'' Eastern names using reversing macros, but leaving them in Western form in the index.}\\
% |  \<| \meta{cseq2} |&| \meta{FNN} |&| \meta{SNN, affix} |& >|\hfill\emph{Western}\\
% |  \<| \meta{cseq3} |&| \meta{FNN} |&| \meta{SNN}\hphantom{\textit{affix, }} |&| \meta{Alt. names} |>|\hfill\emph{W. nickname}\footnote{When the \meta{Alt. names} is used, \meta{FNN} never appears in the body text, but only in the index. See Section \ref{sec:Fname} to avoid possible difficulties. You could use \cmd{\AKA} to create a \emph{see} reference for the \AKA[John David]{Rockefeller, IV}[Jay]{Rockefeller} example on the next page; see Section~\ref{sec:AKA}.}\\
% |  \<| \meta{cseq4} |&| \meta{FNN} |&| \meta{SNN, affix} |&| \meta{Alt. names} |>|\hfill\emph{W. nickname}\\
% |  \<| \meta{cseq5} |&| \hphantom{\meta{FNN}} |&| \meta{SNN}\hphantom{\textit{affix, }} |& >|\hfill\emph{ancient/mono}\\
% |  \<| \meta{cseq6} |&| \hphantom{\meta{FNN}} |&| \meta{SNN, affix} |& >|\hfill\emph{royal/ancient}\\
% |  \<| \meta{cseq7} |&| \hphantom{\meta{FNN}} |&| \meta{SNN, FNN} |& >|\hfill\emph{Eastern}\footnote{``Native'' Eastern names can be reversed to use Western order in the body text, but they will always have an Eastern form in the index.}\\
% |  \<| \meta{cseq8} |&| \hphantom{\meta{FNN}} |&| \meta{SNN}\hphantom{\textit{affix, }} |&| \meta{FNN/affix} |>|\hfill\emph{old syntax}\footnote{This is the old syntax for Eastern and royal names.}\\
% |\end{nameauth}|
% \end{quote}
%
% Each \meta{cseq} creates three macros. In the document text, |\|\meta{cseq} itself works like \cmd{\Name}. |\L|\meta{cseq} (think ``Long'') works like \cmd{\Name*}. |\S|\meta{cseq} (think ``Short'') works like \cmd{\FName}. Please bear in mind the following guidelines:
%
% \begin{itemize}\small
% \item In this context, ``|\<|'' is an escape character and a control sequence. If you forget it or just use |<| without the backslash, you will get errors.
% \item There \emph{must} be four argument fields (three ampersands) per line. Leaving out an ampersand will cause an error. Think ``holy hand grenade of Antioch'' from \emph{Monty Python and the Holy Grail}.
% \item Leading and trailing spaces in each |&|-delimited field are stripped, as is also the case in the main interface.
% \item As in the main interface, medial spaces do not affect first-use control sequences, but they will affect name forms in the body text and index.
% \item In the document text, as with the main interface, include trailing braces |{|\,|}|, control spaces, or the like if text in brackets |[|\,|]| follows any of the shorthands, \emph{e.g.}, |\LWash{} [\emph{sic}].|
% \item The old syntax (Section~\ref{sec:obsolete}), triggered by an empty \meta{FNN} field, causes the \meta{Alt. names} field to be interpreted as either Eastern \meta{FNN} or an \meta{affix}. Due to its limitations and potential confusion, you are encouraged to avoid it unless you are using the \texttt{comma} option.
% \end{itemize}
% \clearpage
%
%  The example below illustrates a fairly complete set of names, apart from some special cases covered elsewhere in the manual:
%
% \begin{quote}\small
% |\begin{nameauth}|\\[0.2ex]
% |  \< Wash & George & Washington & >|\hfill\emph{Western}\\
% |  \< Soto & Hernando & de Soto & >|\hfill\emph{particle}\\
% |  \< JRII & John David & Rockefeller, II & >|\hfill\emph{affix}\\
% |  \< JRIV & John David & Rockefeller, IV & >|\hfill\emph{affix}\\
% |  \< JayR & John David & Rockefeller, IV & Jay >|\hfill\emph{nickname}\\
% |  \< Lewis & Clive Staples & Lewis & C.S. >|\hfill\emph{nickname}\\
% |  \< Jack & Clive Staples & Lewis & Jack >|\hfill\emph{nickname}\\
% |  \< Aris & & Aristotle & >|\hfill\emph{ancient}\\
% |  \< Eliz & & Elizabeth, I & >|\hfill\emph{royal}\\
% |  \< Attil & & Attila, the Hun & >|\hfill\emph{ancient}\\
% |  \< Konoe & Fumimaro & Konoe & >|\hfill\emph{Eastern/Western index}\\
% |  \< Yamt & & Yamamoto, Isoroku & >|\hfill\emph{Eastern/Eastern index}\\
% |\end{nameauth}|
% \end{quote}
%
% Now we see how this works in the body text, which you can compare with the index. A dagger (\dag) indicates an Eastern name with a Western index form.
%
% \begin{multicols}{2}\small
% \noindent\textbf{Basic Uses:}\\
% |\Wash|\hfill  \Wash \\
% |\LWash|\hfill \LWash \\
% |\Wash|\hfill \Wash \\
% |\SWash|\hfill \SWash \\[1ex]
% \textbf{Western Reversed with Comma:}\\
% |\RevComma\LWash|\hfill \RevComma\LWash \\[1ex]
% \textbf{Particles:}\\
% |\Soto|\hfill \Soto \\
% |\Soto|\hfill \Soto \\
% |\CapThis\Soto|\hfill \CapThis\Soto \\[1ex]
% \textbf{Affixes:}\\
% |\JRII|\hfill \JRII \\
% |\LJRII|\hfill \LJRII \\
% |\JRII|\hfill \JRII \\[1ex]
% \textbf{Nicknames:} (See Section~\ref{sec:Fname})\\
% |\JRIV|\hfill \JRIV \\
% |\LJRIV[Jay]|\hfill \LJRIV[Jay] \\
% |\SJRIV[Jay]|\hfill \SJRIV[Jay] \\
% |\SJRIV[Jay] \JRIV|\hfill \SJRIV[Jay] \JRIV\\
% |\LJayR|\hfill \LJayR \\
% |\SJayR|\hfill \SJayR \\
% |\SJayR\ \JayR|\hfill \SJayR\ \JayR\\
% |\Lewis|\hfill \Lewis\\
% |\Lewis|\hfill \Lewis\\
% |\LJack|\hfill \LJack\\
% |\SJack|\hfill \SJack\columnbreak\\
% \textbf{Ancient:}\\
% |\Aris|\hfill \Aris \\
% |\Aris|\hfill \Aris \\[3ex]
% \textbf{Medieval/Royal:}\\
% |\Eliz|\hfill \Eliz \\
% |\Eliz|\hfill \Eliz \\
% |\Atil|\hfill \Attil \\
% |\Atil|\hfill \Attil \\[3ex]
% \textbf{Western / Western Index:}\\
% |\Konoe|\hfill \Konoe \\
% |\LKonoe|\hfill \LKonoe \\
% |\Konoe|\hfill \Konoe \\[3ex]
% \textbf{Eastern / Western Index:}\\
% |\CapName\RevName\LKonoe|\\\hbox{}\hfill \indent\dag\CapName\RevName\LKonoe \\
% |\CapName\Konoe|\hfill \dag\CapName\Konoe \\[3.1ex]
% \textbf{Eastern / Eastern Index:}\\
% |\CapName\Yamt|\hfill \CapName\Yamt \\
% |\CapName\LYamt|\hfill \CapName\LYamt \\
% |\CapName\Yamt|\hfill \CapName\Yamt \\[3.1ex]
% \textbf{Western / Eastern Index:}\\
% |\RevName\LYamt|\hfill \RevName\LYamt \\
% |\Yamt|\hfill \Yamt
% \end{multicols}
%
% Sections~\ref{sec:standards}, \ref{sec:accents}, and~\ref{sec:IndexSort} deal with the pitfalls of accents and capitalization, as well as why you should use \cmd{\PretagName} for any name with control sequences or extended Unicode under NFSS. This becomes very important when authors and publishers use medieval names as Western names.
%
% When tagging or pre-tagging names (Section~\ref{sec:IndexSort}), the \meta{Alternate names} field has no effect on index tags. \cmd{\JRIV} and \cmd{\JayR} need only one tag:\\[1ex] \hbox{}\qquad|\TagName[John David]{Rockefeller, IV}{|\meta{something}|}|\\[1ex] Likewise, \cmd{\Lewis} and \cmd{\Jack} need only one tag:\\[1ex]\hbox{}\qquad|\TagName[Clive Staples]{Lewis}{|\meta{something}|}|\\[1ex] Only in the \meta{Alternate names} field can one use control sequences without them affecting index sorting, unlike in the other fields. If the \meta{FNN} field is empty, then you have the situation below.
%
% \subsubsection{Older Syntax}
% \label{sec:obsolete}
%
% An ``obsolete'' syntax remains for backward compatibility with early versions of \textsf{nameauth} and with the \texttt{comma} option. Please avoid mixing the older and newer forms to avoid possible confusion and error.
%
% The \texttt{comma} option causes Western names with affixes to have a comma. Yet that also causes Eastern and ancient names, or any names using a pattern like \meta{SNN, affix} or \meta{SNN, FNN} to display a comma where it should not occur. In that case the older syntax is needed. The old form lacks some error checking and robustness contained in the new syntax and limits the use of several macros, including \cmd{\AKA.} Section~\ref{sec:error} offers some cautions about the old syntax, as do many places in this manual. The form is:
%
% \begin{quote}
% |\Name{Dagobert}[I]|\hfill\emph{royal name}\\
% |\Name{Yoshida}[Shigeru]|\hfill\emph{Eastern name}\\
% |\begin{nameauth}|\\[0.5ex]
% |  \< Dagb & & Dagobert & I >|\hfill\emph{royal name}\\
% |  \< Yosh & & Yoshida & Shigeru >|\hfill\emph{Eastern name}\\
% |\end{nameauth}|\\[2ex]
% Here the \meta{FNN} fields are empty. That changes the final field from \meta{Alternate names} to \meta{affix/Eastern FNN}.
%
% |\Dagb| gives \Dagb, then \Dagb. In similar fashion, we see |\LDagb| \LDagb, |\CapName\Yosh| \CapName\Yosh, and |\CapName\RevName\LYosh| \CapName\RevName\LYosh.
% \end{quote}
%
% In the old syntax, |\Name{Henry}[VIII]| prints ``\Name{Henry}[VIII]'' and ``\Name{Henry}[VIII].'' If you mix |\Name{Henry}[VIII]| with the newer |\Name{Henry, VIII}| they both print \Name{Henry, VIII} and \Name{Henry, VIII} in the body text. Yet they generate different control sequences for both first/subsequent uses and index tags.\footnote{Technically you can mix the two, as I do here. You must force first and subsequent uses with \cmd{\ForgetName} and \cmd{\SubvertName}. You must make common index tags, \emph{e.g.}: \cmd{\TagName}\texttt{\{Henry, VIII\}\{, king\}} and \cmd{\TagName}\texttt{\{Henry\}[VIII]\{, king\}}. That undermines the time-saving features offered by this package.}
%
% \IndexInactive%
% Avoid |\Name{Henry, VIII}[Tudor]| unless you want ``\Name*{Henry, VIII}[Tudor]'' and ``\Name{Henry, VIII}[Tudor]'' in the body text and ``Henry VIII Tudor'' in the index.
% \IndexActive%
% One solution adds ``Tudor'' as needed in the text after |\Name{Henry, VIII}| and uses a tag in the index: |\TagName{Henry, VIII}{ Tudor}| (see Section \ref{sec:TagName}).
%
% \clearpage
%
% \subsection{Naming Macros}
% \label{sec:Naming}
%
% \subsubsection{\texttt{\textbackslash Name} and \texttt{\textbackslash Name*}}
% 
% \DescribeMacro{\Name}
% \DescribeMacro{\Name*}
% This macro generates two forms of the name: a printed form in the text and a form of the name that occurs in the index.
% The general syntax is:
% \begin{quote}
% \cmd{\Name}\oarg{FNN}\marg{SNN}\oarg{Alternate names}\\
% \cmd{\Name*}\oarg{FNN}\marg{SNN}\oarg{Alternate names}
% \end{quote}
%
% \noindent Here we see how the syntax works:
%
% \begin{quote}\small
% \begin{tabular}{ll}\hline
% {\large\strut}|\Name[Albert]{Einstein}| & \Name[Albert]{Einstein}\\
% {\large\strut}|\Name*[Albert]{Einstein}| & \Name*[Albert]{Einstein}\\
% {\large\strut}|\Name[Albert]{Einstein}| & \Name[Albert]{Einstein}\\\hline
% {\large\strut}|\Name{Confucius}| & \Name{Confucius}\\
% {\large\strut}|\Name*{Confucius}| & \Name*{Confucius}\\
% {\large\strut}|\Name{Confucius}| & \Name{Confucius}\\\hline
% {\large\strut}|\Name[M.T.]{Cicero}[Marcus Tullius]| & \Name[M.T.]{Cicero}[Marcus Tullius]\\
% {\large\strut}|\Name*[M.T.]{Cicero}[Marcus Tullius]| & \Name*[M.T.]{Cicero}[Marcus Tullius]\\
% {\large\strut}|\Name[M.T.]{Cicero}[Marcus Tullius]| & \Name[M.T.]{Cicero}[Marcus Tullius]\\\hline
% {\large\strut}|\Name{Charles, the Bald}| & \Name{Charles, the Bald}\\
% {\large\strut}|\Name*{Charles, the Bald}| & \Name*{Charles, the Bald}\\
% {\large\strut}|\Name{Charles, the Bald}| & \Name{Charles, the Bald}\\\hline
% \end{tabular}
% \end{quote}
%
% \cmd{\Name} displays and indexes names, as illustrated in Section~\ref{sec:PatRef}. It always prints the \meta{SNN} field. \cmd{\Name} prints the ``full name'' at the first occurrence, then the partial form thereafter. \cmd{\Name*} always prints the full name.
%
% The \meta{Alternate names} field replaces the \meta{FNN} field in the body text only. It does this if the \meta{FNN} field is not empty; see ``\Name[M.T.]{Cicero}[Marcus Tullius]'' above. Regarding their index entries, |\Name[M.T.]{Cicero}[Marcus Tullius]| and |\Name[M.T.]{Cicero}| are equivalent. This lets one use a nickname while keeping the indexed form constant. If the \meta{FNN} is empty, you get the old syntax for Eastern and royal names (Section~\ref{sec:obsolete}).
%
% \begin{quote}
%|\begin{nameauth}|\\
%|  \< Einstein & Albert & Einstein & >|\\
%|  \< Cicero & M.T. & Cicero & >|\\
%|  \< Confucius & & Confucius & >|\\
%|  \< CBald & & Charles, the Bald & >|\\
%|\end{nameauth}|
%\end{quote}
%
% \ForgetName[Albert]{Einstein}\ForgetName{Confucius}\ForgetName[M.T.]{Cicero}\ForgetName{Charles, the Bald}%
% Here we have the equivalent with the simplified interface. |\Einstein,| |\LEinstein,| and |\Einstein| produce \Einstein, \LEinstein, and \Einstein. |\CBald| and |\CBald| give \CBald\ and \CBald. |\Confucius| yields \Confucius\ and \Confucius. |\Cicero| prints \Cicero\ and \Cicero, while |\LCicero[Marcus Tullius]| gives \LCicero[Marcus Tullius]. The next page explains why this form may be preferable in some cases for name variants when using the simplified interface.
% \clearpage
%
% \subsubsection{Forenames: \texttt{\textbackslash FName}}
% \label{sec:Fname}
%
% \DescribeMacro{\FName}
% \DescribeMacro{\FName*}
% \cmd{\FName} and its synonym \cmd{\FName*} print just forenames, but only in subsequent name uses.\footnote{The two macros are the same in case you edit \cmd{\Name*} by adding an |F| to get a first reference, just as you might edit \cmd{\Name} the same way to get the same result.}
% They are intended for Western-style names. The syntax is:
% \begin{quote}
% \cmd{\FName}\oarg{FNN}\marg{SNN}\oarg{Alternate names}
% \end{quote}
% This macro always prints full name when a name is first used. That prevents a first-name reference before a person has been introduced. To force a short name as a first reference, you could use a macro to incorporate:
% \begin{quote}
% \cmd{\SubvertName}\oarg{FNN}\marg{SNN}|%|\\
% \cmd{\makeatletter}\cmd{\@nameauth@FirstFormattrue}\cmd{\makeatother}|%|\\
% \cmd{\FName}\oarg{FNN}\marg{SNN}
% \end{quote}
% By design, \cmd{\FName} \emph{never} prints Eastern personal names so that ancient names also work (cf. Section~\ref{sec:PatRef}). Examples of general use include: \ForgetName[Albert]{Einstein}\ForgetName{Confucius}\ForgetName[M.T.]{Cicero}\ForgetName{Charles, the Bald}%
%
% \begin{quote}\small
% \begin{tabular}{ll}\hline
% {\large\strut}|\FName[Albert]{Einstein}| & \FName[Albert]{Einstein}\\
% {\large\strut}|\FName[Albert]{Einstein}| & \FName[Albert]{Einstein}\\\hline
% {\large\strut}|\FName{Confucius}| & \FName{Confucius}\\
% {\large\strut}|\FName{Confucius}|& \FName{Confucius}\\\hline
% {\large\strut}|\FName[M.T.]{Cicero}[Marcus Tullius]| & \FName[M.T.]{Cicero}[Marcus Tullius]\\
% {\large\strut}|\FName[M.T.]{Cicero}[Marcus Tullius]| & \FName[M.T.]{Cicero}[Marcus Tullius]\\\hline
% {\large\strut}|\FName{Charles, the Bald}| & \FName{Charles, the Bald}\\
% {\large\strut}|\FName{Charles, the Bald}| & \FName{Charles, the Bald}\\\hline
% \end{tabular}\\
% \end{quote}
%
% With the simplified interface example from the previous page, |\SEinstein,| |\SConfucius,| |\SCicero,| and |\SCBald| give us \SEinstein, \SConfucius, \SCicero, and \SCBald. |\SCicero[Marcus Tullius]| gives \SCicero[Marcus Tullius]. However, with the macro |\FName[Chesley B.]{Sullenberger, III}[Sully]| we have ``\FName[Chesley B.]{Sullenberger, III}[Sully]'' and ``\FName[Chesley B.]{Sullenberger, III}[Sully].'' Please use caution!
%
%\ForgetName[Clive Staples]{Lewis} This may not always be a ``bug.'' Remembering Section~\ref{sec:simplestart}, you can use \Lewis\ or ``\SJack.'' |\FName[Clive Staples]{Lewis}[C.S.]| or \cmd{\Lewis} gives the first form, while |\FName[Clive Staples]{Lewis}[Jack]| or \cmd{\Jack} gives the second.   |\SJayR| gave \ForgetName[John David]{Rockefeller, IV}\SJayR\ and \SJayR, but the index entry remains ``Rockefeller, John David, IV.'' Using ``default nicknames'' in the simplified interface has some caveats:
%
% \begin{nameauth}%
% \< Ches & Chesley B. & Sullenberger, III & >%
% \< Sully & Chesley B. & Sullenberger, III & Sully >%
% \end{nameauth}%
% \begin{quote}
% |\begin{nameauth}|\\
% |  \< Ches & Chesley B. & Sullenberger, III & >|\\
% |  \< Sully & Chesley B. & Sullenberger, III & Sully >|\\
% |\end{nameauth}|
% \end{quote}
%
% \ForgetName[Chesley B.]{Sullenberger, III} The first use \cmd{\Ches} prints ``\Ches.'' Later, \cmd{\SChes} and \cmd{\SSully} print ``\SChes'' and ``\SSully.'' While |\SChes[Sully]| always gives ``\SChes[Sully],'' |\SSully[Chesley B.]| prints ``\SSully[Chesley B.].'' The \meta{Alternate names} field is always occupied when using \cmd{\Sully,} etc. Thus, the final |[Chesley B.]| is not a macro argument.
%\clearpage
%
%
% \subsection{Affixes and Eastern Names}
%
% \subsubsection{Affixes Need Commas}
% \label{sec:Affix}
%
% Comma-delimited affixes handle several different name types. \emph{Always include a comma as an affix delimiter}, even when the |nocomma| option does not print the comma. Extra spaces between the comma and affix are ignored. Extra commas have no effect. Other name types include royal, medieval, and Eastern names:
%
% \begin{quote}\small\ForgetName{Sun, Yat-sen}
% \begin{tabular}{ll}\hline
% {\large\strut}|\Name[Oskar]{Hammerstein, II}| & \Name[Oskar]{Hammerstein, II}\\
% {\large\strut}|\Name[Oskar]{Hammerstein, II}| & \Name[Oskar]{Hammerstein, II}\\\hline
% {\large\strut}|\Name{Louis, XIV}| & \Name{Louis, XIV}\\
% {\large\strut}|\Name{Louis, XIV}| & \Name{Louis, XIV}\\\hline
% {\large\strut}|\Name{Sun, Yat-sen}| & \Name{Sun, Yat-sen}\\
% {\large\strut}|\Name{Sun, Yat-sen}| & \Name{Sun, Yat-sen}\\\hline
% \end{tabular}
% \end{quote}
%
% You cannot use the old syntax with the \Name[Oskar]{Hammerstein, II} example. One must use comma-delimited suffixes when cross-referencing affixed Western names, royal names, some medieval names, and Eastern names with \cmd{\AKA}; see Section~\ref{sec:AKA}.\medskip
%
% \DescribeMacro{\KeepAffix}
% Put \cmd{\KeepAffix} before \cmd{\Name} or \cmd{\AKA} if a line break or page break divides a \meta{SNN, affix} pair. This puts a non-breaking space between \meta{SNN} and \meta{affix} in the body text, but not in the index. Other options to fix bad breaks include using \cmd{\hbox}, kerning and spacing in the \textsf{microtype} package, etc.\medskip
%
% \DescribeMacro{\ShowComma}
% The \texttt{comma} option is restrictive and used to reproduce older texts. \cmd{\ShowComma} gets the same results on a per-name basis while using the default |nocomma| option. With |\ShowComma\Name[Louis]{Gossett, Jr.}| one gets \ShowComma\Name[Louis]{Gossett, Jr.}. One must use \cmd{\ShowComma} consistently or risk errors in the body text and index.\bigskip
%
% \noindent{\large\bfseries Compare Older Syntax}\\[2ex]
% Avoid using the older syntax, shown below, except with the \texttt{comma} option. The older syntax prevents Eastern and ancient names that use the \meta{SNN, affix} pattern from having unwanted commas in them with the \texttt{comma} option or with \cmd{\ShowComma.} \cmd{\AKA} and \cmd{\PName} cannot create cross-references to these forms. These older forms include:
%
% \begin{quote}\small\ForgetName{Henry}[VIII]
% \begin{tabular}{ll}\hline
% {\large\strut}|\Name{Henry}[VIII]| & \Name{Henry}[VIII]\\
% {\large\strut}|\Name{Henry}[VIII]| & \Name{Henry}[VIII]\\\hline
% {\large\strut}|\Name{Chiang}[Kai-shek]| & \Name{Chiang}[Kai-shek]\\
% {\large\strut}|\Name{Chiang}[Kai-shek]| & \Name{Chiang}[Kai-shek]\\\hline
% \end{tabular}
% \end{quote}
% These older forms work because no \meta{FNN} are present. Otherwise you would get weird nicknames. Again, to avoid potential frustration, please avoid using the older syntax unless you need it.
% \clearpage
%
% \subsubsection{Eastern Names}
% \label{sec:Eastern}
%
% The \textsf{nameauth} package offers ``non-native'' and ``native'' ways to handle romanized Eastern names. \cmd{\RevName}\cmd{\Name}\oarg{Eastern FNN}\marg{Eastern SNN} will produce an Eastern name in the body text and the Western form \meta{SNN}, \meta{FNN} in the index, including the comma. We call this ``non-native'' mode.
%
% In contrast, both \cmd{\Name}\marg{Eastern SNN, Eastern FNN} and the older syntax \cmd{\Name}\marg{Eastern SNN}\oarg{Eastern FNN} produce an Eastern name form in the body text: \meta{SNN} \meta{FNN} as well as in the index. This form has no comma in the index. We call this ``native'' mode. Offering these two modes gives the greatest flexibility in indexing requirements.\bigskip
%
% \DescribeMacro{\ReverseActive}
% \DescribeMacro{\ReverseInactive}
% \DescribeMacro{\RevName}
% The ``smart'' reverse output mechanism converts between Western and Eastern forms in the text, but not the index. If one wants a Western-format index, then pick non-native mode. If Eastern forms are okay in the index, then pick native mode. In addition to the class options described in Section~\ref{sec:options}, \cmd{\ReverseActive} and \cmd{\ReverseInactive} toggle reversing on a larger scale, while \cmd{\RevName} is used once per \cmd{\Name}.
%
% This list of Japanese music artists shows \cmd{\RevName} in action. Names in Western order, then non-native Eastern order are marked with a dagger ({\dag}). All other names are in native Eastern, then Western order. Forms using the old syntax are in parentheses. Name formatting is turned off in order to focus on reversing:
%
% \NamesInactive
% \begin{quote}\small
% \begin{tabular}{lll}\hline
% {\large\strut} & \emph{unchanged} & |\RevName|\\
% {\large\strut}\dag|\Name*[Aiko]{Nakano}| & \dag\Name*[Aiko]{Nakano} & \dag\RevName\Name*[Aiko]{Nakano}\\
% {\large\strut}|\Name*{Arai, Akino}| & \Name*{Arai, Akino} & \RevName\Name*{Arai, Akino}\\
% {\large\strut}(|\Name*{Ishida}[Yoko]|) & (\Name*{Ishida}[Yoko]) & (\RevName\Name*{Ishida}[Yoko])\\
% {\large\strut}|\Name*{Yohko}| & \Name*{Yohko} & \RevName\Name*{Yohko}\\\hline
% \end{tabular}
% \end{quote}
% \NamesActive\medskip
%
% \DescribeMacro{\AllCapsActive}
% \DescribeMacro{\AllCapsInactive}
% \DescribeMacro{\CapName}
% Use \cmd{\AllCapsActive}, \cmd{\AllCapsInactive}, and \cmd{\CapName} for fully-capitalized family names in the body text. These macros are analogous to the reversing macros above and may be used alone or with those and other state-toggling macros, \emph{e.g.} \cmd{\CapName}\cmd{\RevName}\cmd{\Name}. Names in Western order, then non-native Eastern order are marked with a dagger ({\dag}). All other names are in native Eastern, then Western order. Forms using the old syntax are in parentheses. Name formatting is turned off in order to focus on capitalizing and reversing:
%
% \NamesInactive
% \begin{quote}\small
% \begin{tabular}{l@{ }l@{ }l}\hline
% {\large\strut} & \emph{unchanged} & |\CapName\RevName|\\
% {\large\strut}\dag|\Name*[Yoko]{Kanno}| & \dag\CapName\Name*[Yoko]{Kanno} & \dag\CapName\RevName\Name*[Yoko]{Kanno}\\
% {\large\strut}|\Name*{Shikata, Akiko}| & \CapName\Name*{Shikata, Akiko} & \CapName\RevName\Name*{Shikata, Akiko}\\
% {\large\strut}(|\Name*{Nogawa}[Sakura]|) & (\CapName\Name*{Nogawa}[Sakura]) & (\CapName\RevName\Name*{Nogawa}[Sakura])\\
% {\large\strut}|\Name*{Yohko}| & \CapName\Name*{Yohko} & \CapName\RevName\Name*{Yohko}\\\hline
% \end{tabular}
% \end{quote}
% \NamesActive\smallskip
%
% Notice how capitalization is independent of formatting. The reversing and capitalization macros also work with \cmd{\AKA}. They affect only the text, not the index. For caps in the text and index see Section~\ref{sec:formatting}.\clearpage
%
% \subsection{Other Naming Topics}
% {\hfill\large\bfseries Language-Related Issues\hfill}\vspace{-2ex}
% \subsubsection{Particles}
% \label{sec:standards}
%
% According to the \emph{Chicago Manual of Style}, English names with the particles \emph{de}, \emph{de\ la}, \emph{d'}, \emph{von}, \emph{van}, and \emph{ten} generally keep them with the last name, using varied capitalization. \emph{Le}, \emph{La}, and \emph{L'} always are capitalized unless preceded by \emph{de}.\medskip
%
% \DescribeMacro{\CapThis}
% In English, these particles go in the \meta{SNN} field of \cmd{\Name}, \emph{e.g.}, \ForgetName[Walter]{de la Mare}\Name[Walter]{de la Mare}. |\CapThis\Name[Walter]{de la Mare}| lets you capitalize \emph{de} when at the beginning of a sentence. \CapThis\Name[Walter]{de la Mare} will think it fair. \CapThis\Soto\ (using |\CapThis\Soto| from Section~\ref{sec:simplestart}) would agree.
%
% Connect one-character particles with surnames via |~| or \cmd{\nobreakspace} to avoid bad breaks and prevent \cmd{\CapThis} from eating the space between the particle and the surname. There are no issues when particles have two or more characters in them, as do those listed above.\medskip
%
% \DescribeMacro{\AccentCapThis}
% \cmd{\CapThis} (and \cmd{\AccentCapThis}) always work and give the same desired results with \texttt{xelatex} and \texttt{lualatex}. With \texttt{pdflatex} you \emph{must} use \cmd{\AccentCapThis} when the first letter of the particle is an extended Unicode character.
% \begin{quote}
% |\PretagName{Thomas, à~Kempis}{Thomas a Kempis}|\hfill\emph{medieval}\\
% |\PretagName[Thomas]{à~Kempis}{Thomas a Kempis}|\hfill\emph{Western}\\
% |\begin{nameauth}|\\[0.2ex]
% |  \< KempMed & & Thomas, à~Kempis & >|\hfill\emph{medieval}\\
% |  \< KempW & Thomas & à~Kempis & >|\hfill\emph{Western}\\
% |\end{nameauth}|
% \end{quote}
%
% You do not need either \cmd{\CapThis} or \cmd{\AccentCapThis} if you use the medieval forms \KempMed\ and \KempMed. It is important that you do not mix medieval and Western forms to avoid odd name forms and multiple index entries.\footnote{Properly speaking, ``à~Kempis'' and ``Aquinas'' are not surnames but suffixed place names. They create different index entries from Western names and look different in the text.}
%
% \IndexInactive%
% Nevertheless, many people refer to such names as Western surnames, which purists might view as being incorrect. If you need to use the Western variant, you might have to use |\AccentCapThis\KempW| to get \SubvertName[Thomas]{à~Kempis}``\AccentCapThis\KempW.''
% \begin{itemize}\small
% \item Use \cmd{\PretagName} in all names with extended Unicode characters under \texttt{pdflatex}, NFSS, \textsf{inputenc}, and \texttt{makeindex}. See Section~\ref{sec:IndexSort}.
% \item |\CapThis\KempW| halts execution with \texttt{Argument of \textbackslash UTFviii@two@ octets has an extra \}.} Section~\ref{sec:accents} explains why.
% \item |\AccentCapThis\Name[Thomas]{à Kempis}| gives ``\AccentCapThis\Name[Thomas]{à Kempis}'' (space removed) in the absence of a non-breaking space or an explicit \cmd{\space.} This is due to \TeX\ handling ``|#1#2#3\relax|.'' 
% \item Under \texttt{pdflatex} \cmd{\AccentCapThis} should not be used if the first character of a particle is not accented. |\AccentCapThis\Soto| gives \AccentCapThis\Soto. A particle like |lé| would cause \cmd{\AccentCapThis} to fail. Section~\ref{sec:accents} explains more.
% \end{itemize}
% \IndexActive%
% To summarize, use non-breaking spaces when needed. With \texttt{pdflatex} and \textsf{inputenc}, use \cmd{\CapThis} when the first character of the particle is \texttt{a--z.} Use \cmd{\AccentCapThis} when the first character is extended Unicode.
% \clearpage
% You\marginpar{\small\raggedleft Alternates} could use name forms with braces, like |\Name[Thomas]{{à}~Kempis}|, and control sequences, like |\Name[Thomas]{\`a~Kempis}|. Using those forms consistently, with \cmd{\PretagName,} would require you to use \cmd{\CapThis,} never \cmd{\AccentCapThis}. That is because both |{à}| and |\`a| are passed as one macro argument, while under NFSS and \textsf{inputenc}, |à| is passed as two arguments in ``|#1#2#3\relax|'' (see Section~\ref{sec:accents}).
%
% Non-English contexts do not necessarily bind particles to surnames. Using \cmd{\Name} and \cmd{\FName} with alternate forenames helps address this and may skirt the particle capitalization issue. See also Section~\ref{sec:Particles}.
%
% \subsubsection{Formatting Initials}
%
% Omit spaces between initials if possible; see also Bringhurst's \emph{Elements of Typographic Style}. If your publisher wants spaces between initials, try putting thin spaces |\,| between them. Remember also to use \cmd{PretagName} to get the correct index sorting:
% \begin{quote}
% |\PretagName[E.\,B.]{White}{White, E. B.}|\\
% |\begin{nameauth}|\\
% |  \< White & E.\,B. & White & >|\\
% |\end{nameauth}|\\
% \begin{nameauth}
%   \< White & E.\,B. & White & >
% \end{nameauth}
% 
% \begin{tabular}{ll}\hline
% & \vrule width0.5pt\hphantom{\textsc{E.}}\vrule width0.5pt\,\vrule width0.5pt\hphantom{\textsc{B.}}\vrule width0.5pt\hphantom{\textsc{White} and }\vrule width0.5pt\hphantom{E.}\vrule width0.5pt\,\vrule width0.5pt\hphantom{B.}\vrule width0.5pt\hphantom{White}\\
% \cmd{\White} and \cmd{\LWhite} & \White\ and \LWhite\\
% & \vrule width0.5pt\hphantom{\textsc{E.}}\vrule width0.5pt\,\vrule width0.5pt\hphantom{\textsc{B.}}\vrule width0.5pt\hphantom{\textsc{White} and }\vrule width0.5pt\hphantom{E.}\vrule width0.5pt\,\vrule width0.5pt\hphantom{B.}\vrule width0.5pt\hphantom{White}\\\hline
% & \vrule width0.5pt\hphantom{\textsc{E.}}\vrule width0.5pt\ \vrule width0.5pt\hphantom{\textsc{B.}}\vrule width0.5pt\hphantom{\textsc{White}\,and }\vrule width0.5pt\hphantom{E.}\vrule width0.5pt\ \vrule width0.5pt\hphantom{B.}\vrule width0.5pt\hphantom{White}\\
% Normal:\hfill & \textsc{E. B. White}\,and E. B. White.\\
% & \vrule width0.5pt\hphantom{\textsc{E.}}\vrule width0.5pt\ \vrule width0.5pt\hphantom{\textsc{B.}}\vrule width0.5pt\hphantom{\textsc{White}\,and }\vrule width0.5pt\hphantom{E.}\vrule width0.5pt\ \vrule width0.5pt\hphantom{B.}\vrule width0.5pt\hphantom{White}\\\hline
% \end{tabular}
% \end{quote}
%
% \subsubsection{Hyphenation}
%
% The simplified interface trivializes the consistent insertion of optional hyphens in names, as we see below:
%
% \begin{quote}
% |\begin{nameauth}|\\
% |  \< Bier & Johann & Bier\-mann & >|\\
% |\end{nameauth}|
% \end{quote}
% We get \Bier\ and \Bier. This should prevent the break ``Bi-ermann,'' which could happen otherwise. You can even tag and untag such forms. The bad break above was manufactured, while the bad break below is actual.
%
% \newcommand{\de}[1]{\foreignlanguage{ngerman}{#1}}
% Bad breaks can be fixed with the \textsf{babel} or \textsf{polyglossia} packages. \Name[John]{Strietelmeier} can have a bad break in English, as you see. Using \textsf{babel}, we can use the following example so that |\de{\Name*[John]{Strietelmeier}}| generates \de{\Name*[John]{Strietelmeier}} and helps prevent bad breaks:
% \begin{quote}
% |\newcommand{\de}[1]{\foreignlanguage{ngerman}{#1}}|
% \end{quote}
%
% \subsubsection{Listing by Surname}
% \label{sec:LastFirst}
%
%\DescribeMacro{\ReverseCommaActive}
%\DescribeMacro{\ReverseCommaInactive}
%\DescribeMacro{\RevComma}
% The reversing macros \cmd{\ReverseCommaActive}, \cmd{\ReverseCommaInactive}, and \cmd{\RevComma}\ allow the easy generation of name lists ordered as \meta{SNN}, \meta{FNN} or \meta{SNN}, \meta{Alt. names}. The first two are broad toggles, while the third works on a per-name basis. Eastern, medieval, and royal names do not work with these macros. Name formatting has been turned off to focus on reversing and commas:
%
% \NamesInactive
% \begin{quote}\small
% \begin{tabular}{lll}
% {\large\strut}\Name*[J.S.]{Mill}[John Stuart] & \RevComma\Name*[J.S.]{Mill}[John Stuart] & OK\\
% {\large\strut}\Name*[Oskar]{Hammerstein, II} & \RevComma\Name*[Oskar]{Hammerstein, II} & OK\\
% {\large\strut}\Name*{John, Eriugena} & \RevComma\Name*{John, Eriugena} & incompatible\\
% {\large\strut}\Name*{Mao}[Tse-tung] & \RevComma\Name*{Mao}[Tse-tung] & incompatible\\
% {\large\strut}\Name*{Anaximander} & \RevComma\Name*{Anaximander} & OK\\
% \end{tabular}
% \end{quote}
% \NamesActive
%
% {\hfill\large\bfseries Technical-Related Issues\hfill}\vspace{-2ex}
% \subsubsection{Fault Tolerance}
%
% Especially since version 2.0, the \textsf{nameauth} package tries to prevent malformed input from creating side effects. For example, the malformed |\Name[Henry]{VIII}| no longer interferes with the well-formed |\Name{Henry}[VIII].| Furthermore, we guard against empty required values being passed to naming macros.
%
% To reduce errors, \cmd{\Name}, \cmd{\FName}, \cmd{\AKA}, and \cmd{\IndexName} ignore leading and trailing spaces\,---\,but not medial spaces\,---\,making the following equivalent:
%
% \begin{quote}\small\ForgetName[Martin Luther]{King, Jr.}
% \begin{tabular}{ll}
% \textit{Macro Example} & \textit{Resulting text}\\
% |\Name*[ Martin Luther]{King, Jr.}| & \Name*[ Martin Luther]{King, Jr.}\\
% |\Name*[Martin Luther ]{King, Jr.}| & \Name*[Martin Luther ]{King, Jr.}\\
% |\Name*[ Martin Luther ]{King, Jr.}| & \Name*[ Martin Luther ]{King, Jr.}\\
% |\Name*[Martin Luther]{ King, Jr.}| & \Name*[Martin Luther]{ King, Jr.}\\
% |\Name*[Martin Luther]{King, Jr. }| & \Name*[Martin Luther]{King, Jr. }\\
% |\Name*[Martin Luther]{ King, Jr. }| & \Name*[Martin Luther]{ King, Jr. }\\
% \end{tabular}
% \end{quote}
%
% \subsubsection{Detecting Punctuation}
%
% In Western names, some affixes with full stops could appear at the end of a sentence. Such affixes include ``Jr.'' (junior), ``Sr.'' (senior), ``d.\,J.'' (\textit{der J\"ungere}), and ``d.\,\"A.'' (\textit{der \"Altere}). Consider this example:
%
% \begin{quote}\footnotesize\ForgetName[Martin Luther]{King, Jr.}
% \begin{tabular}{r@{\hbox to 1em{\hfil}}c@{\hbox to 1em{\hfil}}l}
% \textit{Macro Example} & \textit{periods} & \textit{Resulting text}\\
% |\Name[Martin Luther]{King, Jr.}.| & $2\rightarrow1$ & \Name[Martin Luther]{King, Jr.}.\\
% |\Name[Martin Luther]{King, Jr.}.| & $2\rightarrow1$ & \Name[Martin Luther]{King, Jr.}.\\
% |\Name[Martin Luther]{King, Jr.}|\texttt{\textvisiblespace} & $1\rightarrow0$ & \Name[Martin Luther]{King, Jr.}\\
% |\Name*[Martin Luther]{King, Jr.}.| & $2\rightarrow1$ & \Name*[Martin Luther]{King, Jr.}.\\
% |\Name*[Martin Luther]{King, Jr.}|\texttt{\textvisiblespace} & $1\rightarrow1$ & \Name*[Martin Luther]{King, Jr.}\\
% |{\Name*[Martin Luther]{King, Jr.}}.| & $2\rightarrow2$ & {\Name*[Martin Luther]{King, Jr.}}.\footnotemark\\
% \end{tabular}\footnotetext{Example of how to frustrate the full stop detection mechanism.}
% \end{quote}
%
%   \cmd{\Name}, \cmd{\FName}, and \cmd{\AKA} all check for a trailing full stop in the printed name in the text. If it exists, and if the next token is also a full stop, they gobble the trailing full stop. Grouping tokens, among other items, can frustrate this detection, as shown above.
%
% \subsubsection{Accented Names}
% \label{sec:accents}
% 
% For texts that contain accented characters, using \texttt{xelatex} or \texttt{lualatex} with \texttt{xindy} (\texttt{texindy}) is recommended. Since version 2.1, \textsf{nameauth} only requires special treatment of the leading character in the \meta{SNN} field when you use \cmd{\CapThis} under \texttt{pdflatex}. In that case use \cmd{\AccentCapThis} (Section~\ref{sec:standards}) if the character is not \texttt{a--z} or in the list below, for use with NFSS and the |utf8| input encoding:
% \begin{quote}\small
% \begin{tabular}{llll}
% \scshape À Á Â Ã Ä Å Æ & \scshape Ç È É Ê Ë & \scshape Ì Í Î Ï Ð Ñ & \scshape first use \\
% À Á Â Ã Ä Å Æ & Ç È É Ê Ë & Ì Í Î Ï Ð Ñ & second use \\[1ex]
% \scshape Ò Ó Ô Õ Ö Ø & \scshape Ù Ú Û Ü Ý & \scshape Þ ß & \scshape first use \\
% Ò Ó Ô Õ Ö Ø & Ù Ú Û Ü Ý & Þ ß & second use \\[1ex]
% \scshape à á â ã ä å æ & \scshape ç è é ê ë & \scshape ì í î ï ð ñ & \scshape first use \\
% à á â ã ä å æ & ç è é ê ë & ì í î ï ð ñ & second use \\[1ex]
% \scshape ò ó ô õ ö ø & \scshape ù ú û ü ý & \scshape þ ÿ & \scshape first use \\
% ò ó ô õ ö ø & ù ú û ü ý & þ ÿ & second use \\[1ex]
% \scshape Ă ă Ą ą Ć ć Č č & \scshape Ď ď Đ đ Ę ę Ě ě & \scshape Ğ ğ İ ı & \scshape first use \\
% Ă ă Ą ą Ć ć Č č & Ď ď Đ đ Ę ę Ě ě & Ğ ğ İ ı & second use \\[1ex]
% \scshape Ĳ ĳ Ľ ľ Ł ł & \scshape Ń ń Ň ň Œ œ & \scshape Ŕ ŕ Ř ř & \scshape first use \\
% Ĳ ĳ Ľ ľ Ł ł & Ń ń Ň ň Œ œ & Ŕ ŕ Ř ř & second use \\[1ex]
% \scshape Ś Ş ş Š š Ţ ţ Ť ť & \scshape Ů ů Ű ű & \scshape Ź ź Ż ż Ž ž & \scshape first use \\
% Ś Ş ş Š š Ţ ţ Ť ť & Ů ů Ű ű & Ź ź Ż ż Ž ž &  second use \\
% \end{tabular}
% \end{quote}
% These characters really act as control sequences, so you must use \cmd{\PretagName} (Section~\ref{sec:IndexSort}) to sort them properly.
%
% Examples |{æ}| and \cmd{\ae} always use argument |#1| if sent through the macro: |\def\foo#1#2#3\relax{<#1#2><#3>}.| With |\foo abc\relax| you always get <ab><c>. Both |\foo {æ}bc\relax| and |\foo \ae bc\relax| give <æb><c>.
%
% Using |æ| by itself gets tricky. In \texttt{xelatex} and \texttt{lualatex} this character always uses |#1| in |\foo æbc\relax| to get <æb><c>. Using \texttt{pdflatex} with NFSS causes problems; |\foo æbc\relax| gives <æ><bc>. With \textsf{inputenc} and \textsf{fontenc} |æ| by itself uses |#1#2|. It is ``two arguments wide.'' Any macro where this |#1#2| pair gets split into |#1| and |#2| will produce either the error \texttt{Unicode char \dots not set up for LaTeX} or the error \texttt{Argument of \textbackslash UTFviii@two@ octets has an extra \}}. Using \cmd{\CapThis} can trigger this kind of error in \texttt{pdflatex.}
% 
% Unicode characters and control sequences are not interchangeable. The example below shows this difference because the names are all long instead of long, then short (if they were the same):
% \begin{quote}
% \IndexInactive%
% |\Name[Johann]{Andre\"a}|\hfill \Name[Johann]{Andre\"a}\\
% \IndexActive%
% |\Name[Johann]{Andreä}|\hfill \Name[Johann]{Andreä} instead of \Name[Johann]{Andreä}\\
% \IndexInactive%
% |\Name{\AE thelred, II}|\hfill \Name{\AE thelred, II}\\
% \IndexActive%
% |\Name{Æthelred, II}|\hfill \Name{Æthelred, II} instead of \Name{Æthelred, II}
% \end{quote}
%
% Additional accents and glyphs can be used with Unicode input, NFSS, \textsf{inputenc}, and \textsf{fontenc} when using fonts with TS1 glyphs, \emph{e.g.}, |\usepackage{lmodern}| (per the table on pages 455--63 in \emph{The Latex Companion}). The following example lets you type, ``In Congreſs, July 4, 1776.''
% \begin{quote}
% |\usepackage{newunicodechar}|\\
% |\DeclareTextSymbolDefault{\textlongs}{TS1}|\\
% |\DeclareTextSymbol{\textlongs}{TS1}{115}|\\
% |\newunicodechar{ſ}{\textlongs}|
% \end{quote}
%
% Additionally, |\newunicodechar{ā}{\=a}| allows |\Name{Ghazāli}| to generate \IndexInactive\Name{Ghaz\=ali}\IndexActive. But be careful! Control sequences like |\=a| fail when using \texttt{makeindex} and \texttt{gind.ist}, such as with the \textsf{ltxdoc} class, because the equal sign is an ``actual'' character instead of |@|. Using |\index{Gh{\=a}zali}| halts execution. Using |\index{Gh\=azali}| gives an ``azali'' entry sorted under ``Gh'' (thanks \Name[Dan]{Luecking}). This issue is not specific to \textsf{nameauth} and affects any document where one uses \texttt{gind.ist}.
%
%One may use expandable control sequences in names (thanks \Name*[Robert]{Schlicht}). Also, you can define letters with \cmd{\edef} and \cmd{\noexpand} to use in names, as some do to ``protect'' accented letters in names. As of version 2.0 of \textsf{nameauth} helpful concerns expressed by \Name[Patrick]{Cousot} have been addressed.
% 
% This package tries to work with multiple languages and typesetting engines. The following preamble snippet illustrates how that can be done:
% \begin{quote}\small
% |\usepackage{ifxetex}|\\
% |\usepackage{ifluatex}|\\
% |\ifxetex|\hfill |% uses fontspec|\\
% \hbox{\quad}|\usepackage{fontspec}|\\
% \hbox{\quad}|\defaultfontfeatures{Mapping=tex-text}|\\
% \hbox{\quad}|\usepackage{xunicode}|\\
% \hbox{\quad}|\usepackage{xltxtra}|\\
% |\else|\\
% \hbox{\quad}|\ifluatex|\hfill |% also uses fontspec|\\
% \hbox{\quad}\hbox{\quad}|\usepackage{fontspec}|\\
% \hbox{\quad}\hbox{\quad}|\defaultfontfeatures{Ligatures=TeX}|\\
% \hbox{\quad}|\else|\hfill |% traditional NFSS|\\
% \hbox{\qquad}|\usepackage[utf8]{inputenc}|\\
% \hbox{\qquad}|\usepackage[TS1,T1]{fontenc}|\\
% \hbox{\quad}|\fi|\\
% |\fi|
% \end{quote}
%
% The following can be used in the text itself to allow for conditional processing that helps one to document work under multiple engines:
%
% \begin{quote}\small
% |\ifxetex| \meta{xelatex text}|%|\\
% |\else|\\
% \hbox{\quad}|\ifluatex|\\
% \hbox{\qquad}|\ifpdf |\meta{lualatex in pdf mode text}|%|\\
% \hbox{\qquad}|\else |\meta{lualatex in dvi mode text}|%|\\
% \hbox{\qquad}|\fi|\\
% \hbox{\quad}|\else|\\
% \hbox{\qquad}|\ifpdf |\meta{pdflatex text}|%|\\
% \hbox{\qquad}|\else |\meta{latex text}|%|\\
% \hbox{\qquad}|\fi|\\
% \hbox{\quad}|\fi|\\
% |\fi|
% \end{quote}
%
% \subsubsection{Custom Formatting}
% \label{sec:formatting}
%
% There are two kinds of formatting at work:
% \begin{enumerate}\small
% \item \textbf{Syntactic Formatting:} This includes reversing names, capitalizing the first letter in the \meta{SNN} field in the body text, and capitalizing the root when \meta{SNN} is a \meta{root, suffix} pair.
% \item \textbf{Typographic Formatting:} This happens after a name has been parsed and reordered as needed into the final form it will take in the text.
% \end{enumerate}
% Formatting\marginpar{\small\raggedleft Continental\\ small caps} does not affect the index. However, literal control sequences in the macro arguments of \cmd{\Name} and friends do make it into the index. Use this method with the \texttt{noformat} option to suppress default formatting. One also must use \cmd{\PretagName} to get proper index sorting:
% \NamesInactive
% \begin{quote}
% \indent|\PretagName[Greta]{\textsc{Garbo}}{Garbo, Greta}|\\
% \indent|\Name[Greta]{\textsc{Garbo}}|
% \end{quote}
% You get \Name[Greta]{\textsc{Garbo}}, then \Name[Greta]{\textsc{Garbo}}. Even if it ``looks the same,'' the name |\Name[\normalfont{Greta}]{\textsc{Garbo}}| is a different name with a different index entry. In other words, avoid putting excess formatting into names, so that you gain both flexibility and consistency.
% 
% A comma delimiter will split the macro argument, potentially causing unbalanced braces. Avoid this by formatting the name and suffix separately:
% \begin{quote}\small
% |\PretagName{\uppercase{Fukuyama},| |Takeshi}{Fukuyama,| |Takeshi}|\\
% |\PretagName[Thurston]{\textsc{Howell},\textsc{III}}%|\\
% |  {Howell, Thurston 3}|\\[1ex]
% |\begin{nameauth}|\\
% |  \< Fukuyama & & \uppercase{Fukuyama}, Takeshi & >|\\
% |  \< Howell & Thurston & \textsc{Howell},\textsc{III} & >|\\
% |\end{nameauth}|
% \end{quote}
% \cmd{\Fukuyama} produces \Fukuyama\ and \Fukuyama. Of course, you could type all-capital surnames without control sequences. Likewise, \cmd{\Howell} generates \Howell\ and \Howell.
% \NamesActive\bigskip
%
% \DescribeMacro{\NameauthName}
% \DescribeMacro{\NameauthLName}
% \DescribeMacro{\NameauthFName}
% These macros are set by default to \cmd{\@nameauth@Name}, the internal name parser. The main and simplified interfaces call them as respective synonyms for \cmd{\Name,} \cmd{\Name*,} and \cmd{\FName.} Should you desire to create your own naming macros, you can redefine them. Here is the minimal working example:
% \begin{quote}
% |\makeatletter|\\
% |\newcommandx*\MyName[3][1=\@empty, 3=\@empty]%|\\
% |  {|\meta{Name here}|}%|\\
% |\newcommandx*\MyLName[3][1=\@empty, 3=\@empty]%|\\
% |  {|\meta{Long name here}|\@nameauth@FullNamefalse}%|\\
% |\newcommandx*\MyFName[3][1=\@empty, 3=\@empty]%|\\
% |  {|\meta{Short name here}|\@nameauth@FirstNamefalse}%|\\
% |\makeatother|
% \end{quote}
% \clearpage
%
% The macros above do not really work together with the rest of \textsf{nameauth} package, so be careful! You can hook these macros into the user interface thus:
% \begin{quote}
% \makeatletter%
% \newcommandx*\MyName[3][1=\@empty, 3=\@empty]{\meta{Name here}}%
% \newcommandx*\MyLName[3][1=\@empty, 3=\@empty]{\meta{Long name here}\@nameauth@FullNamefalse}%
% \newcommandx*\MyFName[3][1=\@empty, 3=\@empty]{\meta{Short name here}\@nameauth@FirstNamefalse}%
% \makeatother%
% |\renewcommand*{\NameauthName}{\MyName}|\\
% |\renewcommand*{\NameauthLName}{\MyLName}|\\
% |\renewcommand*{\NameauthFName}{\MyFName}|\\
% |\begin{nameauth}|\\
% |  \< Silly & No Particular & Name & >|\\
% |\end{nameauth}|\\
% |This is \Silly, \LSilly, and \SSilly.|\\
% \renewcommand*{\NameauthName}{\MyName}%
% \renewcommand*{\NameauthLName}{\MyLName}%
% \renewcommand*{\NameauthFName}{\MyFName}%
% \begin{nameauth}
%   \< Silly & No Particular & Name & >
% \end{nameauth}
% This is \Silly, \LSilly, and \SSilly.
% \end{quote}
% Like \cmd{\NamesFormat} below, the macros \cmd{\NameauthName,} \cmd{\NameauthLName,} and \cmd{\NameauthFName} respect scoping unless you use \cmd{\global.} Now \cmd{\Silly} and |\Name[No Particular]{Name}| produce \IndexInactive\Silly\ and \Name[No Particular]{Name}\IndexActive.\bigskip
%
% \DescribeMacro{\NamesFormat}
% When formatting is active, \cmd{\NamesFormat} is called at the first instance of a name, and at every instance of a name when the \texttt{alwaysformat} option is used. Beyond using the package options, one also can redefine \cmd{\NamesFormat} to create custom effects. For example, one might change formatting in all footnotes:
%
% \begin{quote}\small
% |\makeatletter|\\
% |\let\@oldfntext\@makefntext|\\
% |\long\def\@makefntext#1{%|\\
% |  \renewcommand*\NamesFormat{}\@oldfntext{#1}}|\\
% |\makeatother|
% \end{quote}
%
% \noindent This approach will not print the first use of a name in the body text if it already occured in the footnotes unless one uses \cmd{\ForgetName} to force that. This example takes advantage of the local scope of \cmd{\@makefntext}.
%
% A second example puts the mention of first names in boldface, with additional notations in the margin if possible:
%\begin{quote}\small
% |\let\oldformat\NamesFormat|\\
% |\renewcommand*{\NamesFormat}[1]%|\\
% |  {\textbf{#1}\ifinner\else|\\
% |  \marginpar{\raggedleft\scriptsize #1}\fi}|\\
% |\PretagName{Vlad, Ţepeş}{Vlad Tepes}%|
%
% \let\oldformat\NamesFormat%
% \renewcommand*{\NamesFormat}[1]{\textbf{#1}\ifinner\else\marginpar{\raggedleft\scriptsize #1}\fi}%
% {\footnotesize |\Name{Vlad| |III,| |Dracula},| |known| |as| |\AKA{Vlad| |III,| |Dracula}{Vlad, Ţepeş},| |``\AKA*{Vlad| |III,| |Dracula}{Vlad}[the| |Impaler]''| |after| |his| |death,| |was| |the| |son| |of| |\Name{Vlad| |II,| |Dracul},| |a| |member| |of| |the| |Order| |of| |the| |Dragon.| |Later| |references| |to| |``\Name{Vlad| |III,| |Dracula}''| |appear| |thus.|}\smallskip
%
% \Name{Vlad III, Dracula}, known as \AKA{Vlad III, Dracula}{Vlad, Ţepeş}, ``\AKA*{Vlad III, Dracula}{Vlad}[the Impaler]''  after his death, was the son of \Name{Vlad II, Dracul}, a member of the Order of the Dragon. Later references to ``\Name{Vlad III, Dracula}'' appear thus.
% \end{quote}
%
% Outside of the |quote| environment above, we have \ForgetName{Vlad III, Dracula}\Name{Vlad III, Dracula} and \Name{Vlad III, Dracula}. For references to ``Vlad'' instead of ``\Name{Vlad III, Dracula}'' one could use |\Name{Vlad, III Dracula}|. Do not mix these forms with each other or with the old syntax, lest errors bite! You would get multiple index entries, unwanted cross-references, and unexpected forms in the text. The simplified interface helps one to avoid this.
%
% \subsubsection{Disable Formatting}
% \label{sec:DisableFormat}
% 
% \DescribeMacro{\NamesActive}
% \DescribeMacro{\NamesInactive}
% Using the \texttt{frontmatter} option deactivates formatting until \cmd{\NamesActive} occurs. Another macro, \cmd{\NamesInactive}, will deactivate formatting again. These two macros toggle two independent systems of formatting and first use.
%
% Here we switch to the ``front matter'' mode with \cmd{\NamesInactive}:
% \NamesInactive
% \begin{quote}\small
% \begin{tabular}{ll}
% |\Name[Rudolph]{Carnap}| & \Name[Rudolph]{Carnap}\\
% |\Name[Rudolph]{Carnap}| & \Name[Rudolph]{Carnap}\\
% |\Name[Nicolas]{Malebranche}| & \Name[Nicolas]{Malebranche}\\
% |\Name[Nicolas]{Malebranche}| & \Name[Nicolas]{Malebranche}\\
% \end{tabular}
% \end{quote}
%
% Then we switch back to ``main matter'' mode with \cmd{\NamesActive}:
% \NamesActive
% \begin{quote}\small
% \begin{tabular}{ll}
% |\Name[Rudolph]{Carnap}| & \Name[Rudolph]{Carnap}\\
% |\Name[Rudolph]{Carnap}| & \Name[Rudolph]{Carnap}\\
% |\Name[Nicolas]{Malebranche}| & \Name[Nicolas]{Malebranche}\\
% |\Name[Nicolas]{Malebranche}| & \Name[Nicolas]{Malebranche}\\
% \end{tabular}
% \end{quote}
% 
% Notice that we have two independent cases of ``first use'' above. Consider the two ``species'' of names to be ``non-formatted'' and ``formatted,'' intended for front matter and main matter. Yet one could use this in footnotes to implement a different system of names (see also Section~\ref{sec:Tweaks}):
% \begin{quote}\small
% |\makeatletter|\\
% |\let\@oldfntext\@makefntext|\\
% |\long\def\@makefntext#1{%|\\
% |  \NamesInactive\@oldfntext{#1}\NamesActive%|\\
% |}\makeatother|
% \end{quote}
%
% \subsection{Name Decisions}
% \subsubsection{Testing Decisions}
% \label{sec:tests}
%
% Sometimes the behavior of your document may need to change if a name is present or not. The macros in this subsection help to make such changes possible. Only \cmd{\Name,} \cmd{\Name*,} \cmd{\PName,} \cmd{\AKA,} \cmd{\AKA*,} \cmd{\ForgetName,} \cmd{\SubvertName,} and \cmd{\ExcludeName} affect the results of these macros.
%
% The following macros can be useful for generating conditional output in the document, such as inserting a ``short biography'' footnote or callout text after a name, depending on a particular context. Authors also can use them to generate ``reminders to self'' if a name has or has not occurred yet in the document. Such reminders could be linked with the \textsf{comment}, \textsf{pdfcomment}, and similar packages to aid writing and name management.\medskip
%
% \DescribeMacro{\IfMainName}
% If you want to produce output or perform a task based on whether a ``main body'' name exists, use \cmd{\IfMainName}, whose syntax is:
% \begin{quote}
% \cmd{\IfMainName}\oarg{FNN}\marg{SNN}\oarg{Alternate names}\marg{yes}\marg{no}
% \end{quote}
% This is a long macro via \cmd{\newcommandx}, so you can have paragraph breaks in the \meta{yes} and \meta{no} paths. A ``main body'' name is capable of being formatted by this package, \emph{i.e.}, one created by the naming macros when the \texttt{mainmatter} option is used or after \cmd{\NamesActive}. It is distinguished from those names that occur in the front matter and those that have been used as cross-references.
% \clearpage
%
% For example, we can test if we have yet to encounter the name ``Bob Hope'' in this document. We get ``\IfMainName[Bob]{Hope}{I met \Name[Bob]{Hope}}{I have not met \Name[Bob]{Hope}}'' from the following:
% \begin{quote}
% |\IfMainName[Bob]{Hope}%|\\
% |{I met \Name[Bob]{Hope}}%|\\
% |{I have not met \Name[Bob]{Hope}}|
% \end{quote}%
% We will meet \FName[Bob]{Hope} in Section~\ref{sec:AKA}, so after this example we need to use the macro |\ForgetName[Bob]{Hope}| to ``forget'' that we saw this name.\ForgetName[Bob]{Hope}\medskip
%
% \DescribeMacro{\IfFrontName}
% If you want to produce output or perform a task based on whether a ``front matter'' name exists, use \cmd{\IfFrontName}, whose syntax is:
% \begin{quote}
% \cmd{\IfFrontName}\oarg{FNN}\marg{SNN}\oarg{Alternate names}\marg{yes}\marg{no}
% \end{quote}
% This macro works the same as \cmd{\IfMainName.} A ``front matter'' name is not capable of being formatted by this package, \emph{i.e.}, one created by the naming macros when the \texttt{frontmatter} option is used or after \cmd{\NamesInactive}. It is distinguished from those names that occur in the main matter and those that have been used as cross-references.
%
% For example, we can test whether a name has been used as a formatted name, an unformatted name, or both:
% \begin{quote}
% |\IfFrontName[Rudolph]{Carnap}%|\\
% |{\IfMainName[Rudolph]{Carnap}%|\\
% |  {\Name[Rudolph]{Carnap} is both}%|\\
% |  {\Name[Rudolph]{Carnap} is only non-formatted}}%|\\
% |{\IfMainName[Rudolph]{Carnap}%|\\
% |  {\Name[Rudolph]{Carnap} is only formatted}%|\\
% |  {\Name[Rudolph]{Carnap} is not mentioned}}|
% \end{quote}%
% From this we get the result that we expect from Section~\ref{sec:DisableFormat}, namely:
% \IfFrontName[Rudolph]{Carnap}%
% {\IfMainName[Rudolph]{Carnap}%
%   {\Name[Rudolph]{Carnap} is both}%
%   {\Name[Rudolph]{Carnap} is only non-formatted}}%
% {\IfMainName[Rudolph]{Carnap}%
%   {\Name[Rudolph]{Carnap} is only formatted}%
%   {\Name[Rudolph]{Carnap} is not mentioned}}. We will return to this topic later.\medskip
%
% \DescribeMacro{\IfAKA}
% If you want to produce output or perform a task based on whether a ``\emph{see}-reference'' name exists, use \cmd{\IfAKA}, whose syntax is:
% \begin{quote}
% \cmd{\IfAKA}\oarg{FNN}\marg{SNN}\oarg{Alt. names}\marg{y}\marg{n}\marg{excluded}
% \end{quote}
% This macro works similarly to \cmd{\IfMainName,} although it has an ``excluded'' branch in order to detect those names excluded from indexing by \cmd{\ExcludeName} (Section~\ref{sec:exclude}). A ``\emph{see}-reference'' name is printed in the body text but only exists as a cross-reference created by \cmd{\AKA} and \cmd{\AKA*}. From the following example we get ``\IfAKA[Jay]{Rockefeller}{\LJRIV\ has an alias}{\LJRIV\ does not have an alias}{\LJRIV\ is excluded}'':
% \begin{quote}
% |\IfAKA[Jay]{Rockefeller}%|\\
% |  {\LJRIV\ has an alias}%|\\
% |  {\LJRIV\ does not have an alias}%|\\
% |  {\LJRIV\ is excluded}|
% \end{quote}
% If you are confident that you will not be dealing with names generated by \cmd{\ExcludeName} then you can just leave the \meta{excluded} branch as |{}.|
% \clearpage
%
% A similar use of |\IfAKA{Confucius}| tells us that ``\IfAKA{Confucius}{\Name{Confucius} is an alias}{\Name{Confucius} is not an alias}{\Name{Confucius} is excluded}.'' Yet one might have to check further about \Name{Confucius} to see if it is used as a formatted name or a non-formatted name.
%
% Here we test for a name used with \cmd{\ExcludeName} (Section~\ref{sec:exclude}) to get the result, ``\ExcludeName{Grinch}\IfAKA{Grinch}{\Name{Grinch} is an alias}{\Name{Grinch} is not an alias}{\Name{Grinch} is excluded}'':
% \begin{quote}
% |\ExcludeName{Grinch}%|\\
% |\IfAKA{Grinch}%|\\
% |  {\Name{Grinch} is an alias}%|\\
% |  {\Name{Grinch} is not an alias}%|\\
% |  {\Name{Grinch} is excluded}|
% \end{quote}
% 
% \subsubsection{Changing Decisions}
% \label{sec:Tweaks}
% 
% This section describes macros that change the status of whether a name has occurred. That also helps to avoid clashes between formatted and non-formatted names. They are meant for editing at or near the final draft stage. ``\emph{See}-reference'' names created by \cmd{\AKA} are not affected by these macros.\bigskip
%
% \DescribeMacro{\ForgetName}
% This macro is a ``dirty trick'' of sorts that takes the same optional and mandatory arguments used by \cmd{\Name}. It handles its arguments in the same way, except that it ignores the final argument if \meta{FNN} are present. The syntax is:
% \begin{quote}
% \cmd{\ForgetName}\oarg{FNN}\marg{SNN}\oarg{Alternate names}
% \end{quote}
% This macro causes \cmd{\Name} and friends globally to ``forget'' prior uses of a name. The next use of that name will print as if it were a ``first use,'' even if it is not. Index entries and cross-references are \emph{never} forgotten.\bigskip
% 
% \DescribeMacro{\SubvertName}
% This macro is the opposite of the one above. It takes the same arguments. It handles its arguments in the same manner. The syntax is:
% \begin{quote}
% \cmd{\SubvertName}\oarg{FNN}\marg{SNN}\oarg{Alternate names}
% \end{quote}
% This macro causes \cmd{\Name} and friends globally to think that a prior use of a name already has occurred. The next use of that name will print as if it were a ``subsequent use,'' even if it is not.\bigskip
%
% The default \marginpar{\small\raggedleft Scope} behavior of these two macros changes whether a name is ``forgotten'' or ``subverted'' simultaneously for front matter and main matter names, Remember the example above that gave us the answer, ``\IfFrontName[Rudolph]{Carnap}{\IfMainName[Rudolph]{Carnap}{\Name[Rudolph]{Carnap} is both}{\Name[Rudolph]{Carnap} is only non-formatted}}{\IfMainName[Rudolph]{Carnap}{\Name[Rudolph]{Carnap} is only formatted}{\Name[Rudolph]{Carnap} is not mentioned}}'':
% \begin{quote}
% |\IfFrontName[Rudolph]{Carnap}%|\\
% |{\IfMainName[Rudolph]{Carnap}%|\\
% |  {\Name[Rudolph]{Carnap} is both}%|\\
% |  {\Name[Rudolph]{Carnap} is only non-formatted}}%|\\
% |{\IfMainName[Rudolph]{Carnap}%|\\
% |  {\Name[Rudolph]{Carnap} is only formatted}%|\\
% |  {\Name[Rudolph]{Carnap} is not mentioned}}|
% \end{quote}
%
% Now watch closely: After we use \ForgetName[Rudolph]{Carnap}|\ForgetName[Rudolph]{Carnap}| we get the result,
% ``\IfFrontName[Rudolph]{Carnap}{\IfMainName[Rudolph]{Carnap}{\Name[Rudolph]{Carnap} is both}{\Name[Rudolph]{Carnap} is only non-formatted}}{\IfMainName[Rudolph]{Carnap}{\Name[Rudolph]{Carnap} is only formatted}{\Name[Rudolph]{Carnap} is not mentioned}}.'' Both the main matter name and the front matter name were forgotten!
%
% This default behavior helps synchronize formatted and unformatted types of names. For example, if you wanted to use unformatted names in the footnotes and formatted names in the text (Section~\ref{sec:DisableFormat}), you could use, \emph{e.g.} \cmd{\SubvertName} right after the first use of a name in the body text, ensuring that all references in the text and notes would be short unless otherwise modified.\footnote{This manual takes advantage of that behavior at times in order to synchronize first and subsequent uses of names between formatted and unformatted sections of the body text.}
%
% \DescribeMacro{\LocalNames}
% \DescribeMacro{\GlobalNames}
% If, however, this ``global'' behavior of \cmd{\ForgetName} and \cmd{\SubvertName} is not desired, you can use \cmd{\LocalNames} to change that behavior and \cmd{\GlobalNames} to restore the default behavior. Both of these macros are global in scope.
%
% After \cmd{\LocalNames,} if you are in a ``front matter'' section via the \texttt{frontmatter} option or \cmd{\NamesInactive,} \cmd{\ForgetName} and \cmd{\SubvertName} will only affect unformatted names. If you are in a ``main matter'' section via the \texttt{mainmatter} option or \cmd{\NamesActive,} then \cmd{\ForgetName} and \cmd{\SubvertName} will only affect formatted names. The following example helps to illustrate local changes:
% \begin{quote}\small
% |\def\CheckChuck{%\IfFrontName[Charlie]{Chaplin}%|\\
% |  {\IfMainName[Charlie]{Chaplin}{both}{front}}%|\\
% |  {\IfMainName[Charlie]{Chaplin}{main}{none}}}%|\\[2ex]
% \def\CheckChuck{\IfFrontName[Charlie]{Chaplin}%
%   {\IfMainName[Charlie]{Chaplin}{both}{front}}%
%   {\IfMainName[Charlie]{Chaplin}{main}{none}}}%
% We begin by creating a formatted name in the main matter:\\
% |\Name*[Charlie]{Chaplin}|\hfill\Name*[Charlie]{Chaplin}\\
% |\CheckChuck|\hfill\CheckChuck\\[2ex]
% Now we switch to an unformatted section and create a name there:\\
% |\NamesInactive|\NamesInactive\\
% |\Name*[Charlie]{Chaplin}|\hfill\Name*[Charlie]{Chaplin}\\
% |\CheckChuck|\hfill\CheckChuck\\[2ex]
% We now have two names. They look and behave the same, but are two different ``species'' with independent first and subsequent uses. We set the scope of \cmd{\ForgetName} and \cmd{\SubvertName} to local, then forget the name in the unformatted section:\\
% |\LocalNames|\LocalNames\\
% |\ForgetName[Charlie]{Chaplin}|\ForgetName[Charlie]{Chaplin}\\
% |\CheckChuck|\hfill\CheckChuck\\[2ex]
% We ``subvert'' the name control sequence in the unformatted section, as if the name has occurred, and switch back to the main section:
% |\SubvertName[Charlie]{Chaplin}|\SubvertName[Charlie]{Chaplin}\\
% |\NamesActive|\NamesActive\\
% |\CheckChuck|\hfill\CheckChuck\\[2ex]
% We forget the formatted name and reset the default behavior:\\
% |\ForgetName[Charlie]{Chaplin}|\ForgetName[Charlie]{Chaplin}\\
% |\GlobalNames|\GlobalNames\\
% |\CheckChuck|\hfill\CheckChuck\\[2ex]
% Finally, we forget everything:\\
% |\ForgetName[Charlie]{Chaplin}|\ForgetName[Charlie]{Chaplin}\\
% |\CheckChuck|\hfill\CheckChuck\\[2ex]
% \end{quote}
%
% \subsection{Name Variant Macros}
% \subsubsection{\texttt{\textbackslash AKA}}
% \label{sec:AKA}
%
% \DescribeMacro{\AKA}
% \DescribeMacro{\AKA*}
% \cmd{\AKA} (meaning \textit{also known as}) handles pseudonyms, stage names, \emph{noms de plume}, and so on in order to replace typing manual cross-references in the index. The syntax for \cmd{\AKA} is:
% \begin{quote}
% \cmd{\AKA}\oarg{FNN}\marg{SNN}\oarg{Alt. FNN}\marg{Alt. SNN}\oarg{Alt. names}\\
% \cmd{\AKA*}\oarg{FNN}\marg{SNN}\oarg{Alt. FNN}\marg{Alt. SNN}\oarg{Alt. names}
% \end{quote}
%
% \noindent Only the \meta{FNN} and \meta{SNN} arguments from \cmd{\Name} and friends may be cross-referenced. The new syntax allows \cmd{\AKA} to cross-reference all name types. Both macros create a cross-reference in the index from the \meta{Alt. FNN}, \meta{Alt. SNN}, and \meta{Alt. names} fields to a name defined by \meta{FNN} and \meta{SNN}, regardless of whether that name has been used.
%
% Both macros print only the \meta{Alt. FNN} and \meta{Alt. SNN} fields in the body text. If the \meta{Alt. names} field is present, \cmd{\AKA} swaps \meta{Alt. names} with \meta{Alt. FNN} in the body text, similar to the naming macros.
%
% \cmd{\AKA*} has two functions. For Western names, where \meta{Alt. FNN} is present, \cmd{\AKA*} prints either just the \meta{Alt. FNN} or just the \meta{Alt. names} when they also are present. However, if \meta{Alt. FNN} is absent, \cmd{\AKA*} prints just \meta{Alt. names} if present, otherwise \meta{Alt. SNN}. See also Section~\ref{sec:TagName}.
%
% Here is a simple example with the default system of formatting:
% \begin{quote}\small
% |\Name{Jean, sans Peur}| |(\AKA{Jean,| |sans| |Peur}{Jean| |the| |Fearless})|\\ {\ttfamily was Duke of Burgundy 1404|--|1419.}
%
% \Name{Jean, sans Peur} (\AKA{Jean, sans Peur}{Jean the Fearless}) was Duke of Burgundy 1404--1419.
% \end{quote}
% ``Jean the Fearless'' intentionally receives no formatting because I intend that only names with main index entries be formatted. One could put \cmd{\AKA} within a formatting macro to make that otherwise. Still, the reversing and capitalizing mechanisms do work with \cmd{\AKA}.
%
% This complex example shows the Continental style with no default formatting:
% \begin{quote}\small
% |\PretagName[Heinz]{\textsc{Rühmann}}{Ruehmann, Heinz}%|\\
% |\PretagName[Heinrich Wilhelm]{\textsc{Rühmann}}%|\\
% |  {Ruehmann, Heinrich Wilhelm}%|\\
% |\SubvertName[Heinz]{\textsc{Rühmann}}%|\\
% |\AKA*[Heinz]{\textsc{Rühmann}}%|\\
% |  [Heinrich Wilhelm]{\textsc{Rühmann}} %|\\
% |``\FName[Heinz]{\textsc{Rühmann}}'' %|\\
% |\Name[Heinz]{\textsc{Rühmann}} %|\\
% \texttt{(7 March 1902|-||-|3 October 1994) was a German film actor who\break appeared in over 100 films between 1926 and 1993.}\\[1ex]
% \NamesInactive
% \SubvertName[Heinz]{\textsc{Rühmann}}%
% \AKA*[Heinz]{\textsc{Rühmann}}%
%   [Heinrich Wilhelm]{\textsc{Rühmann}} %
% ``\FName[Heinz]{\textsc{Rühmann}}'' %
% \Name[Heinz]{\textsc{Rühmann}} %
% (7 March 1902--3 October 1994) was a German film actor who appeared in over 100 films between 1926 and 1993.
% \NamesActive
% \end{quote}
% First I want ``\Name*[Heinz]{\textsc{Rühmann}}'' to be the main name of reference, so \cmd{\SubvertName} causes  \cmd{\FName} to print the short version.
% Second, I use \cmd{\AKA*} to print only the forenames ``Heinrich Wilhelm'' in the body text. Nevertheless, the index cross-reference will be complete.
% Third, \cmd{\FName} prints ``\FName[Heinz]{\textsc{Rühmann}}.'' Finally, \cmd{\Name} prints \Name[Heinz]{\textsc{Rühmann}}. Of course I used \cmd{\PretagName} to sort the index entries.
% \clearpage
%
% Using \Name[Bob]{Hope}, \ForgetName{Louis, XIV}\Name{Louis, XIV}, \Name{Lao-tzu}, and \Name{Gregory, I} as examples, we see how \cmd{\AKA} and \cmd{\AKA*} work:
%
% \begin{quote}\small
% \begin{tabular}{ll}\hline
% {\large\strut}|\AKA[Bob]{Hope}[Leslie Townes]{Hope}| & \AKA[Bob]{Hope}[Leslie Townes]{Hope}\\
% {\large\strut}|\AKA*[Bob]{Hope}[Leslie Townes]{Hope}| & \AKA*[Bob]{Hope}[Leslie Townes]{Hope}\\
% {\large\strut}|\AKA[Bob]{Hope}%|\\|  [Leslie Townes]{Hope}[Lester T.]| & \AKA[Bob]{Hope}[Leslie Townes]{Hope}[Lester T.]\\
% {\large\strut}|\AKA*[Bob]{Hope}%|\\|  [Leslie Townes]{Hope}[Lester T.]| & \AKA*[Bob]{Hope}[Leslie Townes]{Hope}[Lester T.]\\\hline
% {\large\strut}|\AKA{Louis, XIV}{Sun King}| & \AKA{Louis, XIV}{Sun King}\\
% {\large\strut}|\AKA*{Louis, XIV}{Sun King}| & \AKA{Louis, XIV}{Sun King}\\
% {\large\strut}|\AKA{Lao-tzu}{Li, Er}| & \AKA{Lao-tzu}{Li, Er}\\
% {\large\strut}|\AKA*{Lao-tzu}{Li, Er}| & \AKA{Lao-tzu}{Li, Er}\\\hline
% {\large\strut}|\AKA{Gregory, I}{Gregory}[the Great]| & \AKA{Gregory, I}{Gregory}[the Great]\\
% {\large\strut}|\AKA*{Gregory, I}{Gregory}[the Great]| & \AKA*{Gregory, I}{Gregory}[the Great]\\\hline
% \end{tabular}
% \end{quote}
% The alternate form ``Lester T. Hope'' does not appear in the index, but only in the body text to allow for variations. \Name*{Gregory, I} ``\AKA*{Gregory, I}{Gregory}[the Great]'' happens with\\[1ex]
% \indent\quad|\Name*{Gregory,| |I}| |``\AKA*{Gregory,| |I}{Gregory}[the| |Great]''|\\[1ex]
% The index has a \emph{see} reference from ``Gregory the Great'' to ``Gregory I.'' Some helpful tips for \cmd{\AKA} and \cmd{\AKA*} follow:
% \begin{itemize}\small
% \item \oarg{FNN}\marg{SNN} is the main name. \oarg{Alt. FNN}\marg{Alt. SNN}\oarg{Alt. names} is the cross-reference. Forgetting this may cause errors.
% \item The old syntax causes \cmd{\AKA} and \cmd{\AKA*} to fail: |\AKA{Louis}[XIV]{Sun King}| and |\AKA{Gregory}[I]{Gregory}[the Great]|.
% \item The \meta{Alt. SNN} field uses comma-delimited suffixes.
% \item The \meta{Alt. names} field does not use comma-delimited suffixes.
% \item Eastern names work as pseudonyms, with all that entails. One can refer to \Name[Lafcadio]{Hearn} as \CapName\AKA[Lafcadio]{Hearn}{Koizumi, Yakumo}:\\\hbox{}\qquad|\CapName\AKA[Lafcadio]{Hearn}{Koizumi, Yakumo}|.
% \item Particles work: \CapThis\AKA[Charles]{du Fresne}{du Cange} is the alternate name for \Name[Charles]{du Fresne}, which is capitalized via \cmd{\CapThis}\cmd{\AKA}. See also Section~\ref{sec:Particles}.
% \item Reversing works, \emph{e.g.},\\\hbox{}\qquad \cmd{\RevComma}: \RevComma\AKA[Bob]{Hope}[Leslie Townes]{Hope}\\\hbox{}\qquad \cmd{\RevName}: \RevName\CapName\AKA[Lafcadio]{Hearn}{Koizumi, Yakumo}
% \item The name fields of \cmd{\PretagName} correspond with the \oarg{Alt. FNN}\marg{Alt. SNN}\oarg{Alt. names} fields of \cmd{\AKA}:\\[1ex]\hbox{}\qquad |\AKA{Vlad| |III,| |Dracula}{Vlad,| |Ţepeş}| matches\\\hbox{}\qquad |\PretagName{Vlad,| |Ţepeş}{Vlad| |Tepes}|\\[1ex] This form does not match: |\PretagName{Vlad}[Ţepeş]{Vlad| |Tepes}|.
% \item With stage names like \Name[The Amazing]{Kreskin}, if you want them in the index, use |\Name[The Amazing]{Kreskin}| to get ``Kreskin, The Amazing.'' \IndexInactive Otherwise use something like |\Name[J.]{Kreskin}[The Amazing]| to get \Name[J.]{Kreskin}[The Amazing] in the text and ``Kreskin, J.'' in the index.\\[1ex] Using \cmd{\AKA} with such names looks like: |\AKA[The Amazing]{Kreskin}| |[Joseph]{Kresge}| and |\AKA[J.]{Kreskin}[Joseph]{Kresge}|.\IndexActive You get \Name*[The Amazing]{Kreskin}, a.k.a. \AKA[The Amazing]{Kreskin}[Joseph]{Kresge}.
% \item Special cases like ``Iron Mike'' Tyson as the nickname for \Name[Mike]{Tyson} may be handled in a number of ways.
% \begin{enumerate}\small
% \item Follow |``Iron Mike''| with |\IndexName[Mike]{Tyson}| and do whatever you want in the text. This may be the easiest solution.
% \item Use |``\AKA[Mike]{Tyson}{Iron Mike}''| to create ``\AKA[Mike]{Tyson}{Iron Mike}'' in the text and a \emph{see}-type cross-reference to ``Tyson, Mike'' in the index. Be sure to have an occurrence of |\Name[Mike]{Tyson}| in the text. See also Section~\ref{sec:AKA}. This is the best solution in terms of how \textsf{nameauth} is designed.
% \item Always get ``Iron Mike Tyson'' with something like:\\[1ex]
% |\newcommand*{\Iron}{\SubvertName[Mike]{Tyson}%|\\
% |\FName[Mike]{Tyson}[Iron Mike] \Name[Mike]{Tyson}}|\\[1ex]
% \newcommand*{\Iron}{\SubvertName[Mike]{Tyson}\FName[Mike]{Tyson}[Iron Mike] \Name[Mike]{Tyson}}
% |``\Iron''| gives you ``\Iron.''\footnote{In typesetting this manual I defined the macro \cmd{\Iron} and others like it on one continuous line because defining a macro over multiple lines with comment characters ending them in \textsf{ltxdoc} and a \texttt{.dtx} file caused extra spaces to be inserted.} You are responsible for typesetting the first use and creating a cross-reference. This solution runs somewhat contrary to the design principles of \textsf{nameauth}, but it may be helpful if you want the invariant name ``\Iron'' to recur and you want to save typing.
% \end{enumerate}
% \end{itemize}
%
% \cmd{\AKA} will not create multiple cross-references. Handle the special case where one moniker applies to multiple people with a manual solution, \emph{e.g.}, ``Snellius'' for both \Name*[Willebrord]{Snel van Royen} and his son \Name*[Rudolph]{Snel van Royen}:
%\begin{quote}
% |\index{Snellius|\verb!|!{}|see{Snel|\,|van|\,|Royen,|\,|Rudolph;%|\\ |Snel|\,|van|\,|Royen,|\,|Willebrord}}|
% \index{Snellius|see{Snel van Royen, Rudolph;%
% Snel van Royen, Willebrord}}
%\end{quote}
%
% Cross-references generated by \cmd{\AKA} and \cmd{\AKA*} are meant only to be \emph{see} references, never page entries. See also Section~\ref{sec:error}. In certain cases, the alternate name might need to be indexed with page numbers and \emph{see also} references. Do not use \cmd{\AKA} in those cases, rather, consider the following:
%
% \label{manualxref}\label{Rambam}%
%\begin{itemize}\small
% \item Refer to the person intended, \emph{e.g.}, \Name{Maimonides} (\AKA{Maimonides}{Moses ben-Maimon}):\\ |\Name{Maimonides}| |(\AKA{Maimonides}{Moses| |ben-Maimon})|
% \item We now have a name and a \emph{see} reference. Now one must refer to the alternate name, \emph{e.g.}, \Name{Rambam}: |\Name{Rambam}|.
% \item The alternate name must occur before making a cross-reference to the main name, in this case, \Name{Maimonides}.
% \item Add \verb!\index{Rambam|seealso{Maimonides}}! at the end of the document to ensure that it is the last entry among the cross-references. Generally, \emph{see also} references follow \emph{see} references in an index entry.\footnote{Different standards exist for punctuating index entries and cross-references. Check with your publisher, style guide, docs for \textsf{xindy} and \textsf{makeindex}, and \textsf{http://tex.stackexchange.com}.}
%\end{itemize}
% \clearpage
%
% Using \cmd{\PretagName} helps avoid the need for manual index entries. Instead of doing a lot of extra work for some names, consider the following example:
%
% \begin{quote}
% {\ttfamily%
% |\PretagName{\textit{Doctor Angelicus}}%|\\
% |  {Doctor Angelicus}%|\\
% |Perhaps the greatest medieval theologian was|\\
% |\Name{Thomas, Aquinas}|\\
% |(\AKA{Thomas, Aquinas}{Thomas of Aquino})|,\\
% also known as\\
% |\AKA{Thomas, Aquinas}{\textit{Doctor Angelicus}}|.}
%
% \PretagName{\textit{Doctor Angelicus}}%
%   {Doctor Angelicus}%
% Perhaps the greatest medieval theologian was
% \Name{Thomas, Aquinas}
% (\AKA{Thomas, Aquinas}{Thomas of Aquino}),
% also known as
% \AKA{Thomas, Aquinas}{\textit{Doctor Angelicus}}.
% \end{quote}
% We use the medieval form: |\Name{Thomas, Aquinas}| because ``Aquinas'' is not a surname. Section~\ref{sec:standards} talks about those unfortunate situations where one must use the Western form |\Name[Thomas]{Aquinas}.|
%
% \subsubsection{\texttt{\textbackslash PName}}
%
% \DescribeMacro{\PName}
% \cmd{\PName} is a ``convenience macro'' meant for Western names. It generates a main name followed by a cross-reference in parentheses with the following syntax:
% \begin{quote}\small
% \cmd{\PName}\oarg{FNN}\marg{SNN}\oarg{other FNN}\marg{other SNN}\oarg{other alt.}
% \end{quote}
%
% Although \cmd{\PName} creates an easy shortcut, its drawbacks are many. It only can use the \meta{FNN}\meta{SNN} form of \cmd{\AKA}. Neither \cmd{\AKA*}, nor \cmd{\CapName}, \cmd{\CapThis}, \cmd{\RevComma}, \cmd{\RevName}, and the related package options work with \cmd{\PName.}
%
% The main name comes first, followed by the name that is only a \emph{see} reference. \cmd{\PName} can generate the following examples:
%
% \begin{quote}\small
% |\PName[Mark]{Twain}[Samuel L.]{Clemens}|\\\hbox{}\hfill \PName[Mark]{Twain}[Samuel L.]{Clemens}\\[1ex]
% |\PName*[Mark]{Twain}[Samuel L.]{Clemens}|\\\hbox{}\hfill \PName*[Mark]{Twain}[Samuel L.]{Clemens}\\[1ex]
% |\PName[Mark]{Twain}[Samuel L.]{Clemens}|\\\hbox{}\hfill \PName[Mark]{Twain}[Samuel L.]{Clemens}\\[2ex]
% |\PName{Voltaire}[François-Marie]{Arouet}|\\\hbox{}\hfill \PName{Voltaire}[François-Marie]{Arouet}\\[1ex]
% |\PName*{Voltaire}[François-Marie]{Arouet}|\\\hbox{}\hfill \PName*{Voltaire}[François-Marie]{Arouet}\\[1ex]
% |\PName{Voltaire}[François-Marie]{Arouet}|\\\hbox{}\hfill \PName{Voltaire}[François-Marie]{Arouet}
% \end{quote}
%
% \cmd{\PName} can be a bit sketchy with medieval names. You get \PName{William, I}{William, the Conqueror} with |\PName{William,| |I}{William,| |the Conqueror}.| Stay away from |\PName{William, I}{William}[the Conqueror]| because that is the old syntax that can break both \cmd{\AKA} and \cmd{\PName} if used in the leading arguments instead of in the trailing arguments. The old syntax can get you confused and lead you to type |\PName{William, I}[William]{the Conqueror}.| You would get a name that looked right in the body text but wrong in the index.
%
% Something like |\PName{Lao-tzu}{Li, Er}| ``\PName{Lao-tzu}{Li, Er}'' works well enough, but |\PName{Gregory, I}{Gregory}[the Great]|\ForgetName{Gregory, I} ``\PName{Gregory, I}{Gregory}[the Great]'' starts moving close to the old syntax.
%
% \subsection{Indexing Macros}
%
% \subsubsection{Indexing Control}
% \label{sec:SectionIndex}
%
% \DescribeMacro{\IndexActive}
% \DescribeMacro{\IndexInactive}
% Using the \texttt{noindex} option deactivates the indexing function of this package until \cmd{\IndexActive} occurs. Another macro, \cmd{\IndexInactive}, will deactivate indexing again. These can be used throughout the document, independently of \cmd{\ExcludeName}. They are global in scope, as are the other toggle macros in this package, so one must be explicit in turning indexing on and off.\medskip
%
% \noindent\textbf{You cannot use index tags if the \textsf{nameauth} indexing feature is inactive.}
%
% \subsubsection{Indexing and \textsf{babel}}
% \label{sec:babel}
% Using\marginpar{\small\raggedleft \textsf{texindy}} \textsf{babel} with Roman page numbers will put \cmd{\textlatin} in the index entries if one includes a language that does not use the Latin alphabet\,---\,even if the main language does. The \texttt{texindy} program will ignore such references. This issue can affect \textsf{nameauth.}
%
% One workaround for \texttt{texindy} redefines \cmd{\textlatin} to produce the page number itself within a certain scope like:
% \begin{quote}
% |\newcommand{\fixindex}[1]{\def\textlatin##1{##1}#1}|
% \end{quote}
% This solution has proven quite effective for me. One need only type
% \begin{quote}
% |\fixindex{%|\\
% \meta{paragraphs of running text}|%|\\
% |}|
% \end{quote}
% Of course, one can opt to check if \cmd{\textlatin} is defined, save its value, redefine it, then restore it, perhaps even in an environment.
%
% \subsubsection{\texttt{\textbackslash IndexName}}
% 
% \DescribeMacro{\IndexName}
% This macro creates an index entry like those created by \cmd{\Name} and friends. It prints nothing in the body text. The syntax is:
% \begin{quote}
% \cmd{\IndexName}\oarg{FNN}\marg{SNN}\oarg{Alternate names}
% \end{quote}
%
% \cmd{\IndexName} complies with the new syntax, where a suffixed pair in \meta{SNN} is a name/affix pair that can be ancient or Eastern. If \meta{FNN} are present, it ignores \meta{Alternate names}. Otherwise, if \meta{FNN} are absent, \cmd{\IndexName} sees \meta{Alternate names} as an affix using the old syntax.
%
% After \cmd{\IndexInactive} this macro does nothing until \cmd{\IndexActive} appears. It will not create index entries for names used with \cmd{\AKA} as cross-references.
%
% The indexing mechanism in the \textsf{nameauth} package follows \emph{Chicago Manual of Style} standards regarding Western names and affixes. Thus the name \LChes\ becomes ``Sullenberger, Chesley B., III'' in the index. Otherwise, if \meta{FNN} is absent, the comma would trigger ancient, medieval, and Eastern name forms in the index.
%
% \subsubsection{Index Sorting}
% \label{sec:IndexSort}
%
% The general practice for sorting with \texttt{makeindex -s} involves creating your own |.ist| file (pages 659--65 in \emph{The Latex Companion}). Otherwise use the following form that works with both \texttt{makeindex} and \texttt{texindy}: |\index{|\meta{sortkey}|@|\meta{actual}|}|
%
%Before version 2.0 of \textsf{nameauth}, one had to sort and index names like \Name[Jan]{Łukasiewicz} and \Name*{Æthelred, II} by putting them between \cmd{\IndexInactive} and \cmd{\IndexActive} while creating manual index entries.\medskip
% 
% \DescribeMacro{\PretagName}
% Fortunately, the current versions of \textsf{nameauth} have adopted an easier solution. The syntax of \cmd{\PretagName} is like that of \cmd{\TagName}:
% \begin{quote}
% \cmd{\PretagName}\oarg{FNN}\marg{SNN}\oarg{Alternate names}\marg{tag}
% \end{quote}
% The \cmd{\PretagName} macro differs from the other tagging macros:
% \begin{itemize}\small
% \item You can ``pretag'' any name and any cross-reference.
% \item You can ``tag'' and ``untag'' only names, not cross-references.
% \item There is no command to undo a ``pretag.''
% \end{itemize}
% \cmd{\PretagName} creates a sort key terminated with the ``actual'' character, which is |@| by default. Do not include the ``actual'' character in the pretag.
% Here is an example of its use:
% \begin{quote}
% |\PretagName[Jan]{Łukasiewicz}{Lukasiewicz, Jan}|\\
% |\PretagName{Æthelred, II}{Aethelred 2}|
% \end{quote}
%
% One need only pretag names once in the preamble. Every time that one refers to \Name[Jan]{Łukasiewicz} or \Name{Æthelred, II}, the proper index entry will be created. If you create a cross-reference with \cmd{\AKA} and you want to pretag it, see Section~\ref{sec:AKA}.\medskip
%
% \DescribeMacro{\IndexActual}
% If you need to change the ``actual'' character, such as with \texttt{gind.ist}, put |\IndexActual{=}| in the preamble.
%
% \subsubsection{\texttt{\textbackslash TagName}}
% \label{sec:TagName}
%
% \DescribeMacro{\TagName}
% This macro creates an index tag that will be appended to all index entries for a corresponding \cmd{\Name} from when it is invoked until the end of the document or a corresponding \cmd{\UntagName}. Both \cmd{\TagName} and \cmd{\UntagName} handle their arguments like \cmd{\IndexName}. If global tags are desired, tag names in the preamble.
% \begin{quote}
% \cmd{\TagName}\oarg{FNN}\marg{SNN}\oarg{Alternate names}\marg{tag}
% \end{quote}
%
% Tags are not ``pretags.'' To help sort that out, we look at what gets affected by these commands:\medskip
%
% \begin{tabular}{r@{\,\vrule width0.5pt\,}c@{\,\vrule width0.5pt\,}c@{\,\vrule width0.5pt\,}l}
% & \cmd{\PretagName} & \\
% |\index{| & |Aethelred 2@| & |Æthelred II| & |, king}|\\
% & & & \cmd{\TagName} and \cmd{\UntagName}\\
% \end{tabular}\medskip
%
% All the tagging commands use the name arguments as a reference point. \cmd{\PretagName} generates the leading sort key while \cmd{\TagName} and \cmd{\UntagName} affect the trailing content of the index entry.
% \clearpage
%
% Tags created by \cmd{\TagName} can be helpful in the indexes of history texts. Several features of this package are designed for historical research. Suppose you are working with medieval subject matter. The following macros come in handy:
% \begin{quote}\small
% \begin{tabular}{p{0.5\textwidth}p{0.28\textwidth}}
% |\TagName{Leo, I}{, pope}| |\TagName{Gregory, I}{, pope}| & (in the preamble)\\
% \dots & \\
% |\Name*{Leo,| |I}| |\Name*{Gregory,| |I}| & (first references to \ForgetName{Leo, I}\Name*{Leo, I} and \ForgetName{Gregory, I}\Name*{Gregory, I})\\
% \dots & \\
% |\Name*{Leo, I} was known as| |\AKA{Leo, I}{Leo}[the Great].| & \Name*{Leo, I} was known as \AKA{Leo, I}{Leo}[the Great].\\
% \dots & \\
% |\Name{Gregory,| |I}| |``\AKA*{Gregory,| |I}%| |{Gregory}[the Great],''| |another| |major| |pope.| & \Name{Gregory, I} ``\AKA*{Gregory, I}{Gregory}[the Great],'' another major pope.\\
% \end{tabular}
% \end{quote}
%
% Here \cmd{\TagName} causes the \textsf{nameauth} indexing macros to append ``\texttt{,\textvisiblespace pope}'' to the index entries for \Name*{Gregory, I} and \Name*{Leo, I}.
%
% Tags are literal text that can be daggers, asterisks, and even specials. For example, all fictional names in the index of this manual have an asterisk without any spaces before it. If space is desired between the entry and the tag, one must add the space at the start of the tag. Tagging aids scholarly indexing and can include life/regnal dates and other information.
%
% \cmd{\TagName} works with all name types, not just medieval names. Back in Section~\ref{sec:start} we had the example of \AKA[James Earl]{Carter, Jr.}[Jimmy]{Carter} (cross-reference in the index). \cmd{\TagName} adds ``\texttt{,\textvisiblespace president}'' to his index entry\IndexName[James Earl]{Carter, Jr.}.
%
% You can use the \marg{tag} field of \cmd{\TagName} to add specials to index entries for names. Every name in this document is tagged with at least \verb!{|hyperpage}! to allow hyperlinks in the index using the \textsf{ltxdoc} class and \textsf{hypdoc} package.
%
% \subsubsection{\texttt{\textbackslash UntagName}}
%
% \DescribeMacro{\UntagName}
% \cmd{\TagName} will replace one tag with another tag, but it does not remove a tag from a name. That is the role of \cmd{\UntagName}. The syntax is:
% \begin{quote}
% \cmd{\UntagName}\oarg{FNN}\marg{SNN}\oarg{Alternate names}
% \end{quote}
%
%  By using \cmd{\TagName} and \cmd{\UntagName}, one can disambiguate different people with the same name. For example:
%
% \begin{quote}\small
% \ttfamily This refers to |\Name*[John]{Smith}|.\\
% Now another |\ForgetName[John]{Smith}%|\\
% |\TagName[John]{Smith}{ (other)}\Name[John]{Smith}|.\\
% Then a third |\ForgetName[John]{Smith}%|\\
% |\TagName[John]{Smith}{ (third)}\Name[John]{Smith}|.\\
% Then the first |\UntagName[John]{Smith}\Name*[John]{Smith}|.
%
% \normalfont This refers to \Name*[John]{Smith}.\hfill\emph{index}: Smith, John\\
% Now another \ForgetName[John]{Smith}\TagName[John]{Smith}{* (other)\string|hyperpage}\Name[John]{Smith}.\hfill\emph{index}: Smith, John (second)\\
% Then a third \ForgetName[John]{Smith}\TagName[John]{Smith}{* (third)\string|hyperpage}\Name[John]{Smith}.\hfill\emph{index}: Smith, John (third)\\
% Then the first \TagName[John]{Smith}{*\string|hyperpage}\Name*[John]{Smith}.\hfill\emph{index}: Smith, John
% \end{quote}
%
% The tweaking macros \cmd{\ForgetName} and \cmd{\SubvertName} make it seem like you are dealing with three people who have the same name. The index tags will group together those entries with the same tag.\footnote{Since this document, unlike the example above, puts an asterisk by all fictional names in the index, it puts an asterisk at the beginning of the tags above and does not \cmd{\UntagName} \Name*[John]{Smith}, but retags him with an asterisk again.}
%
% \subsubsection{Global Name Exclusion}
% 
% \DescribeMacro{\ExcludeName}
% \label{sec:exclude}
% This macro globally prevents the indexing of a particular name or cross-reference. If you do not use it at the beginning of the document, you may not exclude any name or cross-reference that has been used already. The syntax is:
% \begin{quote}
% \cmd{\ExcludeName}\oarg{FNN}\marg{SNN}\oarg{Alternate names}
% \end{quote}
%
% You will see excluded names printed in the body text with all the formatting and other features:
% \begin{quote}
% |\ExcludeName[Kris]{Kringle}|\ExcludeName[Kris]{Kringle}\\
% |\Name[Kris]{Kringle}| and |\Name[Kris]{Kringle}|:\\
% \Name[Kris]{Kringle} and \Name[Kris]{Kringle}.
% \end{quote}
% Nevertheless, no matter how many times you use \Name[Kris]{Kringle} in the body text, the name will never appear in the index. Remember the \Name{Grinch} from Section~\ref{sec:tests}? He will not appear in the index either.
%
% \cmd{\ExcludeName} also prevents cross-references. You may see output in the body text, but no \emph{see}-reference will appear in the index:
% \begin{quote}
% |\ExcludeName[Santa]{Claus}|\ExcludeName[Santa]{Claus}\\
% |\AKA[Kris]{Kringle}[Santa]{Claus}| \AKA[Kris]{Kringle}[Santa]{Claus}
% \end{quote}
%
% Instead of using \cmd{\ExcludeName}, which basically prevents the indexing mechanism of the naming macros from doing anything with a particular name, it is far likelier that you would use the index control macros (Section~\ref{sec:SectionIndex}).
% \clearpage
%
% \subsection{Variant Spellings}
%
% This section illustrates why this package is called ``nameauth.'' Here we get to an example where the macros work together to implement a name authority.
%
% Handling variant name spellings can be complicated. For example, let us assume that you are editing a collection of essays. You might settle on the form \Name[W.E.B.]{Du Bois} in your name authority. An essay in that collection might use the alternate spelling \IndexInactive\Name*[W.E.B.]{DuBois}\IndexActive. The author or publisher who owns that work might not grant you permission to alter the spelling. In that case, you could add an alternate spelling. Using the simplified interface, it would be:
% \begin{nameauth}
% \< DuBois & W.E.B. & Du Bois & >
% \< AltDuBois & W.E.B. & DuBois & >
% \end{nameauth}
% \begin{quote}
% |\begin{nameauth}|\\
% |  \< DuBois & W.E.B. & Du Bois & >|\\
% |  \< AltDuBois & W.E.B. & DuBois & >|\\
% |\end{nameauth}|
% \end{quote}
%
% If you wanted to index the alternate spelling with its own entry, the trivial use of \cmd{\AltDuBois} allows that easily. All you need do is make cross-references to each variant in the index so that the reader is aware of them.
%
% Nevertheless, \DuBois\ and \IndexInactive\AltDuBois\IndexActive\ differ only by spaces. For several good reasons, such as fault tolerance in typing, the first/subsequent use mechanism ignores spaces and sees them as \emph{the same name}. Use |\ForgetName[W.E.B.]{Du Bois}| to trigger the first use of \cmd{\AltDuBois} in that section.
%
% If you wanted to index the variants under only one name entry, it gets more complicated. You could do the following:
%
% \begin{enumerate}\small
% \item Use |\ForgetName[W.E.B.]{Du Bois}| at the start of the section.
% \item Wrap \cmd{\AltDuBois} between \cmd{\IndexInactive} and \cmd{\IndexActive}.
% \item Call \cmd{\IndexName} with the authoritative form right after \cmd{\IndexActive}.
% \item Create a cross-reference in the index.
% \end{enumerate}
% This can be automated at the start of the section with something like:
% \begin{quote}%
% \ForgetName[W.E.B.]{DuBois}%
% \gdef\OtherDuBois{\IndexInactive\AltDuBois\IndexActive\IndexName[W.E.B.]{Du Bois}}%
% \index{DuBois, W.E.B.|see{Du Bois, W.E.B.}}%
% |\ForgetName[W.E.B.]{DuBois}|\\
% |\gdef\OtherDuBois{\IndexInactive\AltDuBois\IndexActive%|\\|  \IndexName[W.E.B.]{Du Bois}}|\\
% \verb!\index{DuBois, W.E.B.|see{Du Bois, W.E.B.}}!
% \end{quote}
%
% The alternate section mentions \cmd{\OtherDuBois} starting with a first use: \OtherDuBois. Subsequent uses of  \cmd{\OtherDuBois} print \OtherDuBois. Of course, one could get more complex than the example above. The index will only hold the standard entry for \Name*[W.E.B.]{Du Bois}: ``Du Bois, W.E.B.'' and a cross-reference from the variant ``DuBois, W.E.B.'' to the standard entry.
%
% \clearpage
%
% \subsection{Naming Pattern Reference}
% \label{sec:PatRef}
%
% \subsubsection{Basic Naming}
% \noindent{\bfseries Western Names}\\[2ex]{\small
% \begin{tabular}{p{0.42\textwidth}@{}p{0.53\textwidth}}\hline{\large\strut}
% \textit{First reference in the text}:\newline\hbox to 1em{\hfil}\ForgetName[John]{Smith}\Name[John]{Smith} &
% |\Name*[John]{Smith}|\newline |\Name[John]{Smith}|\newline |\FName[John]{Smith}|\\[1ex]{\large\strut}
% \textit{Subsequent full}: \Name*[John]{Smith} & |\Name*[John]{Smith}|\\{\large\strut}
% \textit{Subsequent surname}: \Name[John]{Smith} & |\Name[John]{Smith}|\\{\large\strut}
% \textit{Subsequent forename}: \FName[John]{Smith} & |\FName[John]{Smith}|\\\hline{\large\strut}
% \textit{Long first reference}: \ForgetName[J.Q.]{Public}\newline\hbox to 1em{\hfil}\Name[J.Q.]{Public}[Jane Q.] & |\Name*[J.Q.]{Public}[Jane Q.]|\newline |\Name[J.Q.]{Public}[Jane Q.]|\newline |\FName[J.Q.]{Public}[Jane Q.]|\\[1ex]{\large\strut}
% \textit{Subsequent full}: \Name*[J.Q.]{Public} & |\Name*[J.Q.]{Public}|\\{\large\strut}
% \textit{Alternate}: \Name*[J.Q.]{Public}[Jane Qetsiyah] & |\Name*[J.Q.]{Public}[Jane Qetsiyah]|\\{\large\strut}
% {\large\strut}\textit{Alternate}: \FName[J.Q.]{Public}[Janie] & |\FName[J.Q.]{Public}[Janie]|\\\hline
% \end{tabular}}
% \vfil
% 
% \noindent{\bfseries Western Plus Affixes}\\[2ex]
% Always use a comma to delimit name/affix pairs.\\[2ex]{\small
% \begin{tabular}{p{0.42\textwidth}@{}p{0.53\textwidth}}\hline{\large\strut}
% \textit{First reference}:\newline\hbox to 1em{\hfil}\ForgetName[George S.]{Patton, Jr.}\Name[George S.]{Patton, Jr.} & |\Name*[George S.]{Patton, Jr.}|\newline |\Name[George S.]{Patton, Jr.}|\newline |\FName[George S.]{Patton, Jr.}|\\[1ex]{\large\strut}
% \textit{Subsequent}: \Name*[George S.]{Patton, Jr.} & |\Name*[George S.]{Patton, Jr.}|\\{\large\strut}
% \textit{Subsequent surname}: \Name[George S.]{Patton, Jr.} & |\Name[George S.]{Patton, Jr.}|\\{\large\strut}
% {\large\strut}\textit{Subsequent forename}: \FName[George S.]{Patton, Jr.}[George] & |\FName[George S.]{Patton, Jr.}[George]|\\\hline
% \end{tabular}}
% \vfil
%
%\noindent |\begin{nameauth}|\\
%|  \< Smith & John & Smith & >|\\
%|  \< JQP & J.Q. & Public & >|\\
%|  \< Patton & George S. & Patton, Jr. & >|\\
%|\end{nameauth}|
% \vfil
%
% \ForgetName[John]{Smith}\ForgetName[J.Q.]{Public}\ForgetName[George S.]{Patton, Jr.}%
% \noindent |\Smith, \LSmith, \Smith, and \SSmith|:\\
% \indent \Smith, \LSmith, \Smith, and \SSmith\\[1ex]
% |\JQP[Jane Q.],| |\LJQP[Jane Q.],| |and| |\JQP[Jane Q.]|:\\
% \indent \JQP[Jane Q.], \LJQP[Jane Q.], and \JQP[Jane Q.]\\[1ex]
% |\LJQP[Jane| |Qetsiyah]\| |and| |\SJQP[Janie]|:\\
% \indent \LJQP[Jane Qetsiyah]\ and \SJQP[Janie]\\[1ex]
% \noindent |\Patton,| |\LPatton,| |\Patton,| |and| |\SPatton|:\\
% \indent \Patton, \LPatton, \Patton, and \SPatton.\\[1ex]
% |\SPatton[George]| prints \SPatton[George].
% \clearpage
%
% \noindent{\bfseries New Syntax: Royal, Eastern, and Ancient}\\[2ex]
% Using |\Name{Demetrius, I Soter}| keeps the number with the affix. To keep the number with the name, use |\Name{Demetrius I, Soter}|. See also Section~\ref{sec:Affix}.\\[2ex]{\small
% \begin{tabular}{p{0.53\textwidth}@{}p{0.42\textwidth}}\hline{\large\strut}
% {\large\strut}\textit{First reference}: \ForgetName{Francis, I}\Name{Francis, I} & |\Name*{Francis, I}|\newline |\Name{Francis, I}|\newline |\FName{Francis, I}|\\[1ex]{\large\strut}
% \textit{Subsequent full}: \Name*{Francis, I} & |\Name*{Francis, I}|\\[1ex]{\large\strut}
% \textit{Subsequent name}: \Name{Francis, I} & |\Name{Francis, I}|\newline |\FName{Francis, I}|\\[1ex]{\large\strut}
% \textit{First reference}: \newline\hbox to 1em{\hfil}\ForgetName{Demetrius, I Soter}\Name{Demetrius, I Soter} & |\Name*{Demetrius, I Soter}|\newline |\Name{Demetrius, I Soter}|\newline |\FName{Demetrius, I Soter}|\\[1ex]{\large\strut}
% \textit{Subsequent full}: \Name*{Demetrius, I Soter} & |\Name*{Demetrius, I Soter}|\\[1ex]{\large\strut}
% {\large\strut}\textit{Subsequent name}: \Name{Demetrius, I Soter} & |\Name{Demetrius, I Soter}|\newline |\FName{Demetrius, I Soter}|\\\hline{\large\strut}
% {\large\strut}\textit{First reference}: \ForgetName{Sun, Yat-sen}\Name{Sun, Yat-sen} & |\Name*{Sun, Yat-sen}|\newline |\Name{Sun, Yat-sen}|\newline |\FName{Sun, Yat-sen}|\\[1ex]{\large\strut}
% \textit{Subsequent full}: \Name*{Sun, Yat-sen} & |\Name*{Sun, Yat-sen}|\\[1ex]{\large\strut}
% {\large\strut}\textit{Subsequent name}: \Name{Sun, Yat-sen} & |\Name{Sun, Yat-sen}|\newline |\FName{Sun, Yat-sen}|\\\hline{\large\strut}
% {\large\strut}\textit{First mononym reference}:\newline\hbox to 1em{\hfil}\ForgetName{Plato}\Name{Plato} &
% |\Name*{Plato}|\newline |\Name{Plato}|\newline |\FName{Plato}|\\[1ex]{\large\strut}
% {\large\strut}\textit{Subsequent}: \Name{Plato} & |\Name*{Plato}|\newline |\Name{Plato}|\newline |\FName{Plato}|\\\hline
% \end{tabular}}
% \vfil
%
%\noindent |\begin{nameauth}|\\
%|  \< Francis & & Francis, I & >|\\
%|  \< Dem & & Demetrius, I Soter & >|\\
%|  \< Sun & & Sun, Yat-sen & >|\\
%|  \< Plato & & Plato & >|\\
%|\end{nameauth}|
% \vfil
%
% \ForgetName{Francis, I}\ForgetName{Demetrius, I Soter}\ForgetName{Sun, Yat-sen}\ForgetName{Plato}%
% \noindent |\Francis,| |\LFrancis,| |\Francis,| |and| |\SFrancis|:\\
% \indent \Francis, \LFrancis, \Francis, and \SFrancis\\[1ex]
% |\Dem,| |\LDem,| |\Dem,| |and \SDem|:\\
% \indent \Dem, \LDem, \Dem, and \SDem\\[1ex]
% |\Sun,| |\LSun,| |\Sun,| |and \SSun|:\\
% \indent \Sun, \LSun, \Sun, and \SSun\\[1ex]
% |\Plato,| |\LPlato,| |\Plato,| |and \SPlato|:\\
% \indent \Plato, \LPlato, \Plato, and \SPlato.
% \vfil
% You also can ``stack'' \cmd{\CapThis}, \cmd{\CapName}, \cmd{\RevName}, \cmd{\KeepAffix}, and so on in front of these control sequences. |\CapName\LSun| generates \CapName\LSun.
% \clearpage
%
% \noindent{\bfseries Old Syntax: Royal and Eastern}\\[2ex]
% Avoid these forms except with the \texttt{comma} option. |\Name{Ptolemy}[I Soter]| keeps the number with the affix. Use |\Name{Ptolemy I}[Soter]| to keep the number with the name. See also Section~\ref{sec:Affix}.\\[2ex]{\small
% \begin{tabular}{p{0.53\textwidth}@{}p{0.42\textwidth}}\hline{\large\strut}
% \textit{First reference}: \ForgetName{Henry}[VIII]\Name{Henry}[VIII] & |\Name*{Henry}[VIII]|\newline |\Name{Henry}[VIII]|\newline |\FName{Henry}[VIII]|\\[1ex]{\large\strut}
% \textit{Subsequent full}: \Name*{Henry}[VIII] & |\Name*{Henry}[VIII]|\\[1ex]{\large\strut}
% \textit{Subsequent name}: \Name{Henry}[VIII] & |\Name{Henry}[VIII]|\newline |\FName{Henry}[VIII]|\\[1ex]{\large\strut}
% \textit{First reference}: \ForgetName{Ptolemy}[I Soter]\Name{Ptolemy}[I Soter] & |\Name*{Ptolemy}[I Soter]|\newline |\Name{Ptolemy}[I Soter]|\newline |\FName{Ptolemy}[I Soter]|\\[1ex]{\large\strut}
% \textit{Subsequent full}: \Name*{Ptolemy}[I Soter] & |\Name*{Ptolemy}[I Soter]|\\[1ex]{\large\strut}
% \textit{Subsequent name}: \Name{Ptolemy}[I Soter] & |\Name{Ptolemy}[I Soter]|\newline |\FName{Ptolemy}[I Soter]|\\\hline{\large\strut}
% \textit{First reference}:\newline \hbox to 1em{\hfil}\ForgetName{Mao}[Tse-tung]\Name{Mao}[Tse-tung] & |\Name*{Mao}[Tse-tung]|\newline |\Name{Mao}[Tse-tung]|\\[1ex]{\large\strut}
% \textit{Subsequent full}: \Name*{Mao}[Tse-tung] & |\Name*{Mao}[Tse-tung]|\\[1ex]{\large\strut}
% \textit{Subsequent name}: \Name{Mao}[Tse-tung] & |\Name{Mao}[Tse-tung]|\newline |\FName{Mao}[Tse-tung]|\\\hline
% \end{tabular}}
% \vfil
%
%\noindent |\begin{nameauth}|\\
%|  \< Henry & & Henry & VIII >|\\
%|  \< Ptol & & Ptolemy & I Soter >|\\
%|  \< Mao & & Mao & Tse-tung >|\\
%|\end{nameauth}|
% \vfil
%
% \ForgetName{Ptolemy}[I Soter]\ForgetName{Henry}[VIII]\ForgetName{Mao}[Tse-tung]%
% \noindent |\Henry, \LHenry, \Henry, and \SHenry|:\\
% \indent \Henry, \LHenry, \Henry, and \SHenry\\[1ex]
% |\Ptol,| |\LPtol,| |\Ptol,| |and \SPtol|:\\
% \indent \Ptol, \LPtol, \Ptol, and \SPtol\\[1ex]
% |\Mao, \LMao, \Mao, and \SMao|:\\
% \indent \Mao, \LMao, \Mao, and \SMao
% \vfil
%
% Avoid mixing old and new syntax. In the body text, |\Name{Antiochus, IV}| and |\Name{Antiochus,| |IV}[Epiphanes]| look alike, but their index entries differ.
%
% \begin{itemize}\small
% \item Use |\Name{Antiochus, IV Epiphanes}| to get \IndexInactive\Name{Antiochus, IV Epiphanes} and \Name{Antiochus, IV Epiphanes} in the text and ``Antiochus IV Epiphanes'' in the index.
%
% \item Use |\Name{Antiochus~IV, Epiphanes}| to get \Name{Antiochus~IV, Epiphanes} and \Name{Antiochus~IV, Epiphanes} in the text and ``Antiochus IV Epiphanes'' in the index.\IndexActive
%
% \item Use |\Name{Antiochus,| |IV}| to get \Name{Antiochus, IV} and \Name{Antiochus, IV} in the text. Use something like |\TagName{Antiochus,| |IV}{| |Epiphanes}| to get ``Antiochus IV Epiphanes'' in the index and add ``Epiphanes'' in the text.
% \end{itemize}
% \clearpage
%
% \subsubsection{Particles}
% \label{sec:Particles}
% The following illustrate the American style of particulate names.\\[2ex]{\small
% \begin{tabular}{p{0.45\textwidth}@{}p{0.50\textwidth}}\hline{\large\strut}
% \textit{First}: \ForgetName[Walter]{de la Mare}\Name[Walter]{de la Mare} & |\Name*[Walter]{de la Mare}|\newline |\Name[Walter]{de la Mare}|\newline |\FName[Walter]{de la Mare}|\\[1ex]{\large\strut}
% \textit{Subsequent}: \Name[Walter]{de la Mare} & |\Name[Walter]{de la Mare}|\\{\large\strut}
% \textit{Start of sentence}: \CapThis\Name[Walter]{de la Mare} & |\CapThis\Name[Walter]{de la Mare}|\\{\large\strut}
% \textit{Forename}: \FName[Walter]{de la Mare} & |\FName[Walter]{de la Mare}|\\\hline
% \end{tabular}}\\[2ex]
%
% \noindent The Continental style differs slightly. These first three forms below put the particles in the index. Long macros are split for readability.\\[2ex]{\small
% \begin{tabular}{p{0.45\textwidth}@{}p{0.50\textwidth}}\hline{\large\strut}
% \textit{The (admittedly long) first use}:\newline\small\Name[Johann Wolfgang von]{Goethe} & |\Name*[Johann Wolfgang von]{Goethe}|\newline |\Name[Johann Wolfgang von]{Goethe}|\newline |\FName[Johann Wolfgang von]{Goethe}|\\[1ex]{\large\strut}
% \textit{Subsequent}: \Name[Johann Wolfgang von]{Goethe} & |\Name[Johann Wolfgang von]{Goethe}|\\[1ex]{\large\strut}
% \textit{Forenames}: \FName[Johann Wolfgang von]{Goethe}[Johann Wolfgang] & |\FName[Johann Wolfgang von]{Goethe}%|\newline|[Johann Wolfgang]|\\\hline
% \end{tabular}}\\[2ex]
%
% \noindent These latter examples of the Continental style use the nickname feature to omit the particles from the index.\\[2ex]{\small
% \begin{tabular}{p{0.45\textwidth}@{}p{0.50\textwidth}}\hline{\large\strut}
% \textit{First}: \Name[Adolf]{Harnack}[Adolf von] & |\Name*[Adolf]{Harnack}[Adolf von]|\newline |\Name[Adolf]{Harnack}[Adolf von]|\newline |\FName[Adolf]{Harnack}[Adolf von]|\\[1ex]{\large\strut}
% \textit{Subsequent full}: \Name*[Adolf]{Harnack}[Adolf von] & |\Name*[Adolf]{Harnack}[Adolf von]|\newline\\{\large\strut}
% \textit{Subsequent surname}: \Name[Adolf]{Harnack}[Adolf von] & |\Name[Adolf]{Harnack}[Adolf von]|\newline |\Name[Adolf]{Harnack}|\\[1ex]{\large\strut}
% \textit{Subsequent forename}: \FName[Adolf]{Harnack} & |\FName[Adolf]{Harnack}|\\\hline
% \end{tabular}}
% \vfil
%
%\noindent |\begin{nameauth}|\\
%|  \< DLM & Walter & de la Mare & >|\\
%|  \< JWG & Johann Wolfgang von & Goethe & >|\\
%|  \< Harnack & Adolf & Harnack & >|\\
%|\end{nameauth}|
%\vfil
%
% \ForgetName[Walter]{de la Mare}\ForgetName[Johann Wolfgang von]{Goethe}\ForgetName[Adolf]{Harnack}%
% \noindent |\DLM\| |and| |\CapThis\DLM|:\\
% \indent \DLM\ and \CapThis\DLM.\\[1ex]
% |\JWG\| |and| |\JWG|:\\
% \indent \JWG\ and \JWG.\\[1ex]
% |\Harnack[Adolf von]\| |and| |\Harnack|:\\
% \indent \Harnack[Adolf von]\ and \Harnack\\[1ex]
% You will not see \Harnack's ``von'' in the index because it was used only in the alternate forenames field.
% \index{Maimonides|seealso{Rambam}}
% \index{Rambam|seealso{Maimonides}}
% \clearpage
%
% \subsection{Errors and Warnings}
% \label{sec:error}
%
% Here are some ways to avoid common errors:
%
% \begin{itemize}\small
% \item Keep it simple! Avoid unneeded macros and use the simplified interface.
% \item Check braces and brackets with naming macros to avoid errors like ``Paragraph ended\dots'' and ``Missing \meta{grouping token} inserted.''
% \item Do not apply a formatting macro to an entire comma-delimited \meta{SNN, affix} pair.  |\Name[Oskar]{\textsc{Hammerstein, II}}| fails due to unbalanced braces because it gets split up. Format each part instead \emph{e.g.}, |\Name[Oskar]{\textsc{Hammerstein},\textsc{II}}.|\IndexName[Oskar]{Hammerstein, II}
% \item With \texttt{pdflatex} use \cmd{\CapThis} when the first letter of a surname particle is \texttt{a--z}, otherwise use \cmd{\AccentCapThis} if it is extended Unicode. Doing otherwise may cause unbalanced braces and related errors.
% \item Consider using \cmd{\PretagName} with all names containing control sequences or extended Unicode; see Section~\ref{sec:IndexSort}.
% \item One way to spot errors is to compare index entries with names in the body text. All macros that produce output also emit meaningful warnings. \cmd{\PName} produces warnings via \cmd{\Name} and \cmd{\AKA}.
% \item Please pay greater attention to the warnings produced by \cmd{\IndexName}, \cmd{\TagName}, \cmd{\UntagName}, and \cmd{\ExcludeName}. Many other warnings are FYI.
% \end{itemize}
% The older syntax presents its own group of potential errors:
% \begin{itemize}\small\IndexInactive
% \item Erroneously typing |\Name[Henry]{VIII}| prints ``\Name*[Henry]{VIII}'' and ``\Name[Henry]{VIII},'' as well as producing a malformed index entry.
% \item Avoid forms like |\Name[Henry]{VIII}[Tudor]| which gives ``\Name*[Henry]{VIII}[Tudor]'' and ``\Name[Henry]{VIII}[Tudor].'' This is a Western name form, not an ancient form. It may act as malformed input if you mix it with proper medieval name forms, but it will not affect them adversely.
% \item The older syntax will not work with some macros. From the film \emph{Men in Black III}, |\AKA{Boris}[the Animal]{Just Boris}| fails. \cmd{\PName} fails for the same reasons. See also Section~\ref{sec:AKA}
% \item This form does work:\\ |\Name{Boris,| |the| |Animal}| |\AKA{Boris,| |the| |Animal}{Just| |Boris}|.\\ You get \Name{Boris, the Animal} being ``\AKA{Boris, the Animal}{Just Boris}.''\IndexActive
% \end{itemize}
% Warnings result from the following:
% \begin{itemize}\small
% \item Using a cross-reference \oarg{Alternate names}\marg{Alternate SNN}\oarg{Alt. names} created by \cmd{\AKA} as a name reference in \cmd{\Name}, \cmd{\FName}, and \cmd{\PName}. They merely will print a name in the body text.
% \item Using a name reference \oarg{FNN}\marg{SNN}\oarg{Alternate names} created by \cmd{\Name}, \cmd{\FName}, and \cmd{\PName} as a cross-reference in \cmd{\AKA}. It merely will print a name in the body text.
% \item Using \cmd{\AKA} to create the same cross-reference multiple times or with a cross-reference created by \cmd{\ExcludeName}. It merely will print a name in the body text, but not the index.
% \item Using \cmd{\IndexName} to index a cross-reference made via \cmd{\AKA} or via the mechanism in \cmd{\ExcludeName} as a main entry. It will do nothing.
% \item Using \cmd{\TagName}, \cmd{\UntagName}, and \cmd{\PretagName} with cross-references. The first two will do nothing. However, \cmd{\PretagName} will ``pretag'' a cross-reference. This is the desired behavior.
% \item Using \cmd{\ExcludeName} with cross-references. It will do nothing.
% \item Using \cmd{\ExcludeName} to exclude a name that has already been used. Likewise, it will do nothing.
% \item Using \cmd{\Name}, \cmd{\FName}, \cmd{\PName}, and \cmd{\AKA} to refer to names and cross-references excluded by \cmd{\ExcludeName}. They merely will print a name in the body text.
% \item Using the |nameauth| environment to redefine shorthands, such as:\\[2ex]
% |\PretagName[E.\,B.]{White}{White, E. B.}|\dots\\[1ex]
% |\begin{nameauth}|\\\IndexName[E.\,B.]{White}
% |  \< White & E.\,B. & White & >|\\
% |  \< White & E. B. & White & >|\\
% |\end{nameauth}|\\[1ex]
% Such redefinitions could generate unwanted index entries.
% \end{itemize}
%
% \clearpage%\StopEventually{^^A
%  \clearpage\PrintChanges
%  \clearpage\PrintIndex
%}
%
% \section{Implementation}
%
% \iffalse
%<*package>
% \fi
% \small
% \subsection{Boolean Values}
% \noindent{\large\bfseries Affix Commas}\\[.5ex]
% The \texttt{comma} and |nocomma| options toggle the first value below, while \cmd{\ShowComma} toggles the second. Each instance of \cmd{\Name} and \cmd{\AKA} reset |@nameauth@ShowComma|.
%    \begin{macrocode}
\newif\if@nameauth@AlwaysComma
\newif\if@nameauth@ShowComma
%    \end{macrocode}\medskip
% \noindent{\large\bfseries Toggle Formatting}\\[.5ex]
% \cmd{\NamesActive} and \cmd{\NamesInactive} or the |mainmatter| and |frontmatter| options set this value below.
%    \begin{macrocode}
\newif\if@nameauth@DoFormat
%    \end{macrocode}
% The next value works with \cmd{\LocalNames} and \cmd{\GlobalNames}.
%    \begin{macrocode}
\newif\if@nameauth@LocalNames
%    \end{macrocode}\medskip
% \noindent{\large\bfseries Indexing}\\[.5ex]
% \cmd{\IndexActive} and \cmd{\IndexInctive} or the |index| and |noindex| options set this below:
%    \begin{macrocode}
\newif\if@nameauth@DoIndex
%    \end{macrocode}
% The |pretag| and |nopretag| options toggle the value below.
%    \begin{macrocode}
\newif\if@nameauth@Pretag
%    \end{macrocode}\medskip
% \noindent{\large\bfseries Name Formatting}\\[.5ex]
% The next Boolean values govern full name capitalization, name reversing, and name reversing with commas.
%    \begin{macrocode}
\newif\if@nameauth@AllCaps
\newif\if@nameauth@AllThis
\newif\if@nameauth@RevAll
\newif\if@nameauth@RevThis
\newif\if@nameauth@RevAllComma
\newif\if@nameauth@RevThisComma
%    \end{macrocode}
% |@nameauth@FirstFormat| toggles the formatting of first occurrences of names.\\ |@nameauth@AlwaysFormat| forces name formatting whenever formatting is active.
%    \begin{macrocode}
\newif\if@nameauth@FirstFormat
\newif\if@nameauth@AlwaysFormat
%    \end{macrocode}
% |@nameauth@FullName| toggles long or short forms in subsequent name uses.\\ |@nameauth@FirstName| is used when printing only first names. |@nameauth@AltAKA| is toggled by either \cmd{\AKA} or \cmd{\AKA*} to print a longer or shorter name.
%    \begin{macrocode}
\newif\if@nameauth@FullName
\newif\if@nameauth@FirstName
\newif\if@nameauth@AltAKA
%    \end{macrocode}
% \cmd{\KeepAffix} toggles the value below. Each instance of \cmd{\Name} and \cmd{\AKA} reset it.
%    \begin{macrocode}
\newif\if@nameauth@NBSP
%    \end{macrocode}
% This Boolean value is used for detection of affixes and final periods.
%    \begin{macrocode}
\newif\if@nameauth@Punct
%    \end{macrocode}
% This Boolean value is triggered by \cmd{\CapThis}. Each instance of \cmd{\Name} and \cmd{\AKA} reset it.
%    \begin{macrocode}
\newif\if@nameauth@DoCaps
%    \end{macrocode}
% This Boolean value is triggered by \cmd{\AccentCapThis} to handle special cases of extended Unicode particle caps. Each instance of \cmd{\Name} and \cmd{\AKA} reset it.
%    \begin{macrocode}
\newif\if@nameauth@Accent
%    \end{macrocode}
% \subsection{Hooks}
% \begin{macro}{\NamesFormat}
% Change typographic formatting of final complete name form in text. See Section~\ref{sec:formatting}.
%    \begin{macrocode}
\newcommand*{\NamesFormat}{}
%    \end{macrocode}
% \end{macro}
% \begin{macro}{\NameauthName}
% \changes{v2.2}{2015/12/01}{Added}
% Hook to create custom naming macros. Usually these three macros have the same control sequence, but they need not do so if you want something different. See Section~\ref{sec:formatting}.
%    \begin{macrocode}
\newcommand*{\NameauthName}{\@nameauth@Name}
%    \end{macrocode}
% \end{macro}
% \begin{macro}{\NameauthLName}
% \changes{v2.3}{2016/01/05}{Added}
% Hook to create custom naming macros. Called after |@nameauth@FullName| is set true. See Section~\ref{sec:formatting}.
%    \begin{macrocode}
\newcommand*{\NameauthLName}{\@nameauth@Name}
%    \end{macrocode}
% \end{macro}
% \begin{macro}{\NameauthFName}
% \changes{v2.2}{2015/12/01}{Added}
% Hook to create custom naming macros. Called after |@nameauth@FirstName| is set true. See Section~\ref{sec:formatting}.
%    \begin{macrocode}
\newcommand*{\NameauthFName}{\@nameauth@Name}
%    \end{macrocode}
% \end{macro}
% \subsection{Package Options}
% The following package options interact with many of the prior Boolean values.
%    \begin{macrocode}
\DeclareOption{comma}{\@nameauth@AlwaysCommatrue}
\DeclareOption{nocomma}{\@nameauth@AlwaysCommafalse}
\DeclareOption{mainmatter}{\@nameauth@DoFormattrue}
\DeclareOption{frontmatter}{\@nameauth@DoFormatfalse}
\DeclareOption{index}{\@nameauth@DoIndextrue}
\DeclareOption{noindex}{\@nameauth@DoIndexfalse}
\DeclareOption{pretag}{\@nameauth@Pretagtrue}
\DeclareOption{nopretag}{\@nameauth@Pretagfalse}
\DeclareOption{allcaps}{\@nameauth@AllCapstrue}
\DeclareOption{normalcaps}{\@nameauth@AllCapsfalse}
\DeclareOption{allreversed}%
  {\@nameauth@RevAlltrue\@nameauth@RevAllCommafalse}
\DeclareOption{allrevcomma}%
  {\@nameauth@RevAlltrue\@nameauth@RevAllCommatrue}
\DeclareOption{notreversed}%
  {\@nameauth@RevAllfalse\@nameauth@RevAllCommafalse}
\DeclareOption{alwaysformat}{\@nameauth@AlwaysFormattrue}
\DeclareOption{smallcaps}{\renewcommand*{\NamesFormat}{\scshape}}
\DeclareOption{italic}{\renewcommand*{\NamesFormat}{\itshape}}
\DeclareOption{boldface}{\renewcommand*{\NamesFormat}{\bfseries}}
\DeclareOption{noformat}{\renewcommand*{\NamesFormat}{}}
\ExecuteOptions%
  {nocomma,%
   mainmatter,%
   index,%
   pretag,%
   normalcaps,%
   notreversed,%
   smallcaps}
\ProcessOptions\relax
%    \end{macrocode}
% \clearpage\noindent
% Now we load the required packages. They facilitate the first/subsequent name uses, the parsing of arguments, and the implementation of starred forms.
%    \begin{macrocode}
\RequirePackage{etoolbox}
\RequirePackage{ifluatex}
\RequirePackage{ifxetex}
\RequirePackage{trimspaces}
\RequirePackage{suffix}
\RequirePackage{xargs}
%    \end{macrocode}
% This macro determines the ``actual'' character for index sorting.
%    \begin{macrocode}
\newcommand*\@nameauth@Actual{@}
%    \end{macrocode}
% \subsection{Internal Macros}
% \begin{macro}{\@nameauth@Clean}
% Thanks to \Name*[Heiko]{Oberdiek}, this macro produces a ``sanitized'' string, even using accented characters, based on the arguments of \cmd{\Name} and friends. With this we can construct a control sequence name and test for it to determine the existence of pseudonyms and the first or subsequent occurrences of a name.
%    \begin{macrocode}
\newcommand*{\@nameauth@Clean}[1]%
  {\expandafter\zap@space\detokenize{#1} \@empty}
%    \end{macrocode}
% \end{macro}
%
% \begin{macro}{\@nameauth@Root}
% \changes{v1.4}{2012/07/24}{Made more robust}
% The following two macros parse \meta{SNN} into a radix and a comma-delimited suffix, returning only the radix. They (and their arguments) are expandable in order to facilitate proper indexing functionality. They form the kernel of the suffix removal and comma suppression features.
%    \begin{macrocode}
\newcommand*{\@nameauth@Root}[1]%
  {\@nameauth@TrimRoot#1,\@empty\relax}
%    \end{macrocode}
% \end{macro}
%
% \begin{macro}{\@nameauth@TrimRoot}
% \changes{v0.9}{2012/02/10}{Suffix handling expandable}
% \changes{v2.0}{2015/11/11}{trim spaces}
% Throw out the comma and suffix, return the radix.
%    \begin{macrocode}
\def\@nameauth@TrimRoot#1,#2\relax{\trim@spaces{#1}}
%    \end{macrocode}
% \end{macro}
%
% \begin{macro}{\@nameauth@CapRoot}
% \changes{v0.95}{2012/02/17}{Added}
% \changes{v2.1}{2015/11/24}{Handle Unicode better}
% The next two macros implement the particulate name capitalization mechanism by returning a radix where the first letter is capitalized. In \texttt{xelatex} and \texttt{lualatex} this is trivial and causes no problems. In \texttt{pdflatex} we have to account for ``double-wide'' accented Unicode characters.
%    \begin{macrocode}
\newcommand*{\@nameauth@CapRoot}[1]%
{%
  \ifxetex
    \@nameauth@CRii#1\relax%
  \else
    \ifluatex
      \@nameauth@CRii#1\relax%
    \else
      \if@nameauth@Accent
        \@nameauth@CRiii#1\relax%
      \else
        \@nameauth@CRii#1\relax%
      \fi
    \fi
  \fi
}
%    \end{macrocode}
% \end{macro}
% \clearpage
% \begin{macro}{\@nameauth@CRii}
% \changes{v0.95}{2012/02/17}{Added}
% \changes{v1.26}{2012/04/24}{Fixed}
% Grab the first letter as one argument, and everything before \cmd{\relax} as the second. Capitalize the first and return it with the second.
%    \begin{macrocode}
\def\@nameauth@CRii#1#2\relax{\uppercase{#1}\@nameauth@Root{#2}}
%    \end{macrocode}
% \end{macro}
%
% \begin{macro}{\@nameauth@CRiii}
% \changes{v2.1}{2015/11/24}{added}
% This is called in \texttt{pdflatex} under \textsf{inputenc} where an accented Unicode character takes the first two arguments. Grab the first ``letter'' as two arguments and cap it, then everything before \cmd{\relax} as the third. Capitalize the first and return it with the second.
%    \begin{macrocode}
\def\@nameauth@CRiii#1#2#3\relax{\uppercase{#1#2}\@nameauth@Root{#3}}
%    \end{macrocode}
% \end{macro}
%
% \begin{macro}{\@nameauth@AllCapRoot}
% \changes{v1.5}{2013/02/22}{Added}
% This macro returns a fully-capitalized radix. It is used for generating capitalized Eastern family names in the body text.
%    \begin{macrocode}
\newcommand*{\@nameauth@AllCapRoot}[1]%
  {\uppercase{\@nameauth@Root{#1}}}
%    \end{macrocode}
% \end{macro}
%
% \begin{macro}{\@nameauth@Suffix}
% \changes{v0.9}{2012/02/10}{Added}
% The following two macros parse \meta{SNN} into a radix and a comma-delimited suffix, returning only the suffix. Anything before a comma is stripped off by |\@nameauth@Suffix|, but a comma must be present in the argument. Leading spaces are removed to allow consistent formatting.
%    \begin{macrocode}
\newcommand*{\@nameauth@Suffix}[1]%
  {\@nameauth@TrimSuffix#1\relax}
%    \end{macrocode}
% \end{macro}
%
% \begin{macro}{\@nameauth@TrimSuffix}
% \changes{v0.9}{2012/02/10}{Added}
% \changes{v1.5}{2013/02/22}{Trim spaces}
% Throw out the radix, comma, and \cmd{\relax}; return the suffix with no leading spaces.
%    \begin{macrocode}
\def\@nameauth@TrimSuffix#1,#2\relax{\trim@spaces{#2}}
%    \end{macrocode}
% \end{macro}
%
% \begin{macro}{\@nameauth@TestDot}
% This macro, based on a snippet by \Name*[Uwe]{Lueck}, checks for a period at the end of its argument. It determines whether we need to call \cmd{\@nameauth@CheckDot} below.
%    \begin{macrocode}
\newcommand*{\@nameauth@TestDot}[1]%
{%
  \def\TestDot##1.\TestEnd##2\TestStop{\TestPunct{##2}}%
  \def\TestPunct##1%
    {\ifx\TestPunct##1\TestPunct\else\@nameauth@Puncttrue\fi}%
  \@nameauth@Punctfalse%
  \TestDot#1\TestEnd.\TestEnd\TestStop%
}
%    \end{macrocode}
% \end{macro}
%
% \begin{macro}{\@nameauth@CheckDot}
% We assume that \cmd{\expandafter} precedes the invocation of \cmd{\@nameauth@CheckDot}, which only is called if the terminal character of the input is a period. We evaluate the lookahead \cmd{\@token} while keeping it on the list of input tokens.
%    \begin{macrocode}
\newcommand*{\@nameauth@CheckDot}%
  {\futurelet\@token\@nameauth@EvalDot}
%    \end{macrocode}
% \end{macro}
%
% \begin{macro}{\@nameauth@EvalDot}
%  If \cmd{\@token} is a full stop, we gobble the token.
%    \begin{macrocode}
\newcommand*{\@nameauth@EvalDot}%
  {\let\@period=.\ifx\@token\@period\expandafter\@gobble \fi}
%    \end{macrocode}
% \end{macro}
% \clearpage
% \begin{macro}{\@nameauth@FmtName}
% \changes{v0.85}{2012/02/05}{Add comma suppression}
% \changes{v0.94}{2012/02/15}{Add particle caps}
% \changes{v0.95}{2012/02/17}{Works with \textsf{microtype}}
% \changes{v2.0}{2015/11/11}{One macro instead of two}
% The following macros format the output of \cmd{\Name}, etc. \cmd{\@nameauth@FmtName} prints names in the body text, either formatted or not. Notice how \cmd{\NamesFormat} (Section~\ref{sec:formatting}) sits between a \cmd{\bgroup} and an \cmd{\egroup} to localize the font change. |@nameauth@AlwaysFormat| will force formatting when possible.
%    \begin{macrocode}
\newcommand*{\@nameauth@FmtName}[1]%
{%
  \if@nameauth@AlwaysFormat\@nameauth@FirstFormattrue\fi
  \@nameauth@TestDot{#1}%
  \if@nameauth@DoFormat
    \if@nameauth@FirstFormat
      \bgroup\NamesFormat{#1}\egroup%
    \else
      #1%
    \fi
  \else
    #1%
  \fi
}
%    \end{macrocode}
% \end{macro}
%
% \begin{macro}{\@nameauth@Index}
% \changes{v0.94}{2012/02/15}{Added}
% \changes{v2.0}{2015/11/11}{Redesigned tagging}
% If the indexing flag is true, create an index entry, otherwise do nothing.
%    \begin{macrocode}
\newcommand*{\@nameauth@Index}[2]%
{%
  \def\cseq{#1}%
  \ifcsname\cseq!TAG\endcsname
    \ifcsname\cseq!PRE\endcsname
      \if@nameauth@DoIndex
        \index{\csname\cseq!PRE\endcsname#2\csname\cseq!TAG\endcsname}%
      \fi
    \else
      \if@nameauth@DoIndex\index{#2\csname\cseq!TAG\endcsname}\fi
    \fi
  \else
    \ifcsname\cseq!PRE\endcsname
      \if@nameauth@DoIndex\index{\csname\cseq!PRE\endcsname#2}\fi
    \else
      \if@nameauth@DoIndex\index{#2}\fi
    \fi
  \fi
}
%    \end{macrocode}
% \end{macro}
% \clearpage
% \begin{macro}{\@nameauth@Name}
% \changes{v0.85}{2012/02/05}{Add comma suppression}
% \changes{v0.96}{2012/02/19}{Works w/ \textsf{microtype}, \textsf{memoir}}
% \changes{v1.5}{2013/02/22}{Add reversing and caps}
% \changes{v2.0}{2015/11/11}{Isolate malformed input; trim spaces; redesign tagging}
% \changes{v2.1}{2015/11/24}{Isolate Unicode issues}
% \changes{v2.3}{2016/01/05}{Rename as internal macro}
% Here is the heart of the package. \Name*[Marc van]{Dongen} provided the basic structure. Parsing, indexing, and formatting are in discrete elements.
%    \begin{macrocode}
\newcommandx*\@nameauth@Name[3][1=\@empty, 3=\@empty]%
{%
  \let\ex\expandafter%
  \leavevmode\hbox{}%
%    \end{macrocode}
% Names occur in horizontal mode; we ensure that. Next we make copies of the arguments to test them and make parsing decisions
%    \begin{macrocode}
  \protected@edef\testa{#1}%
  \protected@edef\arga{\trim@spaces{#1}}%
  \protected@edef\testb{\trim@spaces{#2}}%
  \protected@edef\testbr{\@nameauth@Root{#2}}%
  \protected@edef\testc{#3}%
  \protected@edef\argc{\trim@spaces{#3}}%
  \def\csb{\@nameauth@Clean{#2}}%
  \def\csbc{\@nameauth@Clean{#2#3}}%
  \def\csab{\@nameauth@Clean{#1!#2}}%
%    \end{macrocode}
% Test for malformed input.
%    \begin{macrocode}
  \ifx\testb\@empty
    \PackageError{nameauth}%
    {macro \Name: Essential name missing}%
  \else
    \ifx\csb\@empty
      \PackageError{nameauth}%
      {macro \Name: Essential name malformed}%
    \fi
  \fi
%    \end{macrocode}
% If global caps. reversing, and commas are true, set the local flags true.
%    \begin{macrocode}
  \if@nameauth@AllCaps\@nameauth@AllThistrue\fi
  \if@nameauth@RevAll\@nameauth@RevThistrue\fi
  \if@nameauth@RevAllComma\@nameauth@RevThisCommatrue\fi
%    \end{macrocode}
% The code below handles non-breaking and regular spaces, as well as commas, in the text and the index by setting up which kind we want to use. These will be inserted as appropriate as the output is formatted.
%    \begin{macrocode}
  \protected@edef\ISpace{\space}%
  \protected@edef\Space{\space}%
  \if@nameauth@NBSP\protected@edef\Space{\nobreakspace}\fi
  \if@nameauth@AlwaysComma
    \protected@edef\ISpace{,\space}%
    \protected@edef\Space{,\space}%
    \if@nameauth@NBSP\protected@edef\Space{,\nobreakspace}\fi
  \fi
  \if@nameauth@ShowComma
    \protected@edef\ISpace{,\space}%
    \protected@edef\Space{,\space}%
    \if@nameauth@NBSP\protected@edef\Space{,\nobreakspace}\fi
  \fi
%    \end{macrocode}
% \clearpage\noindent
% The section below parses any ``surnames'' into name/suffix pairs and figures out how to capitalize and reverse them as needed, storing the results for the main parser. 
%    \begin{macrocode}
  \protected@edef\RawShort{\@nameauth@Root{#2}}%
  \if@nameauth@DoCaps
    \protected@edef\CapShort{\@nameauth@CapRoot{#2}}%
  \else
    \let\CapShort\RawShort%
  \fi
  \protected@edef\AllCapShort{\@nameauth@AllCapRoot{#2}}%
  \let\IndexShort\RawShort%
  \ifx\testb\testbr
    \protected@edef\Suff{\@empty}%
    \let\IndexSNN\RawShort%
    \let\Reversed\RawShort%
    \let\SNN\RawShort%
    \let\PrintShort\RawShort%
    \if@nameauth@DoCaps
      \let\Reversed\CapShort%
      \let\SNN\CapShort%
      \let\PrintShort\CapShort%
    \fi
    \if@nameauth@AllThis
      \let\Reversed\AllCapShort%
      \let\SNN\AllCapShort%
      \let\PrintShort\AllCapShort%
    \fi
  \else
    \protected@edef\Suff{\@nameauth@Suffix{#2}}%
    \protected@edef\IndexSNN{\RawShort\ISpace\Suff}%
    \protected@edef\Reversed{\Suff\Space\RawShort}%
    \protected@edef\SNN{\RawShort\Space\Suff}%
    \if@nameauth@RevThis
      \let\PrintShort\Suff%
    \else
      \let\PrintShort\RawShort%
    \fi
    \if@nameauth@DoCaps
      \protected@edef\Reversed{\Suff\Space\CapShort}%
      \protected@edef\SNN{\CapShort\Space\Suff}%
      \if@nameauth@RevThis
        \let\PrintShort\Suff%
      \else
        \let\PrintShort\CapShort%
      \fi
    \fi
    \if@nameauth@AllThis
      \protected@edef\Reversed{\Suff\Space\AllCapShort}%
      \protected@edef\SNN{\AllCapShort\Space\Suff}%
      \if@nameauth@RevThis
        \let\PrintShort\Suff%
      \else
        \let\PrintShort\AllCapShort%
      \fi
    \fi
  \fi
%    \end{macrocode}
% Here we parse names. 
%    \begin{macrocode}
  \ifx\testa\@empty
    \ifx\testc\@empty
%    \end{macrocode}
% This is the section for momonyms, royal name/suffix pairs, and native Eastern names where comma-delimited suffixes are used. The first conditional below checks if we are trying to use an alternate name cross-reference as a main name (code !PN for pseudonym). If we are using a legitimate name, we generate an index entry.
%    \begin{macrocode}
      \ifcsname\csb!PN\endcsname
        \PackageWarning{nameauth}%
        {macro \Name: Xref: #2 cannot be a page reference}%
      \else
        \@nameauth@Index{\csb}{\IndexSNN}%
      \fi
%    \end{macrocode}
% If formatting is active, we handle first and subsequent formatting of names in the main matter (code !MN for main matter name). First we handle subsequent uses. We need \cmd{\expandafter} to enable the punctuation detection.
%    \begin{macrocode}
      \if@nameauth@DoFormat
        \ifcsname\csb!MN\endcsname
          \if@nameauth@FirstName
            \@nameauth@FullNamefalse%
            \@nameauth@FirstNamefalse%
          \fi
          \if@nameauth@FullName
            \@nameauth@FullNamefalse%
            \if@nameauth@RevThis
              \ex\@nameauth@FmtName\ex{\Reversed}%
            \else
              \ex\@nameauth@FmtName\ex{\SNN}%
            \fi
          \else
            \ex\@nameauth@FmtName\ex{\PrintShort}%
          \fi
        \else
%    \end{macrocode}
% Handle first uses.
%    \begin{macrocode}
          \@nameauth@FirstFormattrue%
          \@nameauth@FullNamefalse%
          \@nameauth@FirstNamefalse%
          \csgdef{\csb!MN}{}%
          \if@nameauth@RevThis
            \ex\@nameauth@FmtName\ex{\Reversed}%
          \else
            \ex\@nameauth@FmtName\ex{\SNN}%
          \fi
        \fi
      \else
%    \end{macrocode}
% \clearpage\noindent
% Take care of names in the front matter (code !NF for non-formatted). First handle subsequent uses.
%    \begin{macrocode}
        \ifcsname\csb!NF\endcsname
          \if@nameauth@FirstName
            \@nameauth@FullNamefalse%
            \@nameauth@FirstNamefalse%
          \fi
          \if@nameauth@FullName
            \@nameauth@FullNamefalse%
            \if@nameauth@RevThis
              \ex\@nameauth@FmtName\ex{\Reversed}%
            \else
              \ex\@nameauth@FmtName\ex{\SNN}%
            \fi
          \else
            \ex\@nameauth@FmtName\ex{\PrintShort}%
          \fi
        \else
%    \end{macrocode}
% Handle first uses.
%    \begin{macrocode}
          \@nameauth@FullNamefalse%
          \@nameauth@FirstNamefalse%
          \csgdef{\csb!NF}{}%
          \if@nameauth@RevThis
            \ex\@nameauth@FmtName\ex{\Reversed}%
          \else
            \ex\@nameauth@FmtName\ex{\SNN}%
          \fi
        \fi
      \fi
    \else
%    \end{macrocode}
% \clearpage\noindent
% This is the section that handles the old syntax for royal names and native Eastern names. The first conditional below checks if we are trying to use an alternate name cross-reference as a main name (code !PN for pseudonym). If we are using a legitimate name, we generate an index entry.
%    \begin{macrocode}
      \ifcsname\csbc!PN\endcsname
        \PackageWarning{nameauth}%
        {macro \Name: Xref: #2 #3 cannot be a page reference}%
      \else
        \@nameauth@Index{\csbc}{\IndexSNN\ISpace\argc}%
      \fi
%    \end{macrocode}
% If formatting is active, we handle first and subsequent formatting of names in the main matter (code !MN for main matter name). First we handle subsequent uses.
%    \begin{macrocode}
      \if@nameauth@DoFormat
        \ifcsname\csbc!MN\endcsname
          \if@nameauth@FirstName
            \@nameauth@FullNamefalse%
            \@nameauth@FirstNamefalse%
          \fi
          \if@nameauth@FullName
            \@nameauth@FullNamefalse%
            \if@nameauth@RevThis
              \ex\@nameauth@FmtName\ex{\ex\argc\ex\space\SNN}%
            \else
              \ex\@nameauth@FmtName\ex{\ex\SNN\ex\space\argc}%
            \fi
          \else
            \if@nameauth@RevThis
              \ex\@nameauth@FmtName\ex{\argc}%
            \else
              \ex\@nameauth@FmtName\ex{\PrintShort}%
            \fi
          \fi
        \else
%    \end{macrocode}
% Handle first uses.
%    \begin{macrocode}
          \@nameauth@FirstFormattrue%
          \@nameauth@FullNamefalse%
          \@nameauth@FirstNamefalse%
          \csgdef{\csbc!MN}{}%
          \if@nameauth@RevThis
            \ex\@nameauth@FmtName\ex{\ex\argc\ex\space\SNN}%
          \else
            \ex\@nameauth@FmtName\ex{\ex\SNN\ex\space\argc}%
          \fi
        \fi
      \else
%    \end{macrocode}
% \clearpage\noindent
% Take care of names in the front matter (code !NF for non-formatted). First  handle subsequent uses.
%    \begin{macrocode}
        \ifcsname\csbc!NF\endcsname
          \if@nameauth@FirstName
            \@nameauth@FullNamefalse%
            \@nameauth@FirstNamefalse%
          \fi
          \if@nameauth@FullName
            \@nameauth@FullNamefalse%
            \if@nameauth@RevThis
              \ex\@nameauth@FmtName\ex{\ex\argc\ex\space\SNN}%
            \else
              \ex\@nameauth@FmtName\ex{\ex\SNN\ex\space\argc}%
            \fi
          \else
            \if@nameauth@RevThis
              \ex\@nameauth@FmtName\ex{\argc}%
            \else
              \ex\@nameauth@FmtName\ex{\PrintShort}%
            \fi
          \fi
        \else
%    \end{macrocode}
% Handle first uses.
%    \begin{macrocode}
          \@nameauth@FullNamefalse%
          \@nameauth@FirstNamefalse%
          \csgdef{\csbc!NF}{}%
          \if@nameauth@RevThis
            \ex\@nameauth@FmtName\ex{\ex\argc\ex\space\SNN}%
          \else
            \ex\@nameauth@FmtName\ex{\ex\SNN\ex\space\argc}%
          \fi
        \fi
      \fi
    \fi
  \else
%    \end{macrocode}
% \clearpage\noindent
% This is the section that handles Western names and non-native Eastern names. The first pair of conditionals handle the \texttt{comma} option, \cmd{\RevThisComma}, and alternate forenames. The next conditional below checks if we are trying to use an alternate name cross-reference as a main name (code !PN for pseudonym). If we are using a legitimate name, we generate an index entry.
%    \begin{macrocode}
    \if@nameauth@RevThisComma
      \protected@edef\ISpace{,\space}%
      \protected@edef\Space{,\space}%
      \if@nameauth@NBSP\protected@edef\Space{,\nobreakspace}\fi
    \fi
    \ifx\testc\@empty
      \let\FNN\arga%
    \else
      \let\FNN\argc%
    \fi
    \ifcsname\csab!PN\endcsname
      \PackageWarning{nameauth}%
      {macro \Name: Xref: #1 #2 cannot be a page reference}%
    \else
      \ifx\Suff\@empty
        \@nameauth@Index{\csab}{\IndexShort,\space\arga}%
      \else
        \@nameauth@Index{\csab}{\IndexShort,\space\arga,\space\Suff}%
      \fi
    \fi
%    \end{macrocode}
% If formatting is active, we handle first and subsequent formatting of names in the main matter (code !MN for main matter name). First we handle subsequent uses.
%    \begin{macrocode}
    \if@nameauth@DoFormat
      \ifcsname\csab!MN\endcsname
        \if@nameauth@FirstName
          \@nameauth@FullNamefalse%
          \@nameauth@FirstNamefalse%
          \let\PrintShort\FNN%
        \fi
        \if@nameauth@FullName
          \@nameauth@FullNamefalse%
          \if@nameauth@RevThis
            \ex\@nameauth@FmtName\ex{\ex\SNN\ex\Space\FNN}%
          \else
            \ex\@nameauth@FmtName\ex{\ex\FNN\ex\space\SNN}%
          \fi
        \else
          \ex\@nameauth@FmtName\ex{\PrintShort}%
        \fi
      \else
%    \end{macrocode}
% \clearpage\noindent
% Handle first uses.
%    \begin{macrocode}
        \@nameauth@FirstFormattrue%
        \@nameauth@FullNamefalse%
        \@nameauth@FirstNamefalse%
        \csgdef{\csab!MN}{}%
        \if@nameauth@RevThis
          \ex\@nameauth@FmtName\ex{\ex\SNN\ex\Space\FNN}%
        \else
          \ex\@nameauth@FmtName\ex{\ex\FNN\ex\space\SNN}%
        \fi
      \fi
    \else
%    \end{macrocode}
% Take care of names in the front matter (code !NF for non-formatted). First  handle subsequent uses.
%    \begin{macrocode}
      \ifcsname\csab!NF\endcsname
        \if@nameauth@FirstName
          \@nameauth@FullNamefalse%
          \@nameauth@FirstNamefalse%
          \let\PrintShort\FNN%
        \fi
        \if@nameauth@FullName
          \@nameauth@FullNamefalse%
          \if@nameauth@RevThis
            \ex\@nameauth@FmtName\ex{\ex\SNN\ex\Space\FNN}%
          \else
            \ex\@nameauth@FmtName\ex{\ex\FNN\ex\space\SNN}%
          \fi
        \else
          \ex\@nameauth@FmtName\ex{\PrintShort}%
        \fi
      \else
%    \end{macrocode}
% Handle first uses.
%    \begin{macrocode}
        \@nameauth@FullNamefalse%
        \@nameauth@FirstNamefalse%
        \csgdef{\csab!NF}{}%
        \if@nameauth@RevThis
          \ex\@nameauth@FmtName\ex{\ex\SNN\ex\Space\FNN}%
        \else
          \ex\@nameauth@FmtName\ex{\ex\FNN\ex\space\SNN}%
        \fi
      \fi
    \fi
  \fi
%    \end{macrocode}
% \clearpage\noindent
% Reset all the ``per name'' Boolean values.
%    \begin{macrocode}
  \@nameauth@FirstFormatfalse%
  \@nameauth@NBSPfalse%
  \@nameauth@DoCapsfalse%
  \@nameauth@Accentfalse%
  \@nameauth@AllThisfalse%
  \@nameauth@ShowCommafalse%
  \@nameauth@RevThisfalse%
  \@nameauth@RevThisCommafalse%
%    \end{macrocode}
% Call the full stop detection.
%    \begin{macrocode}
  \if@nameauth@Punct\expandafter\@nameauth@CheckDot\fi
}
%    \end{macrocode}
% \end{macro}
% \subsection{User Interface Macros}
% \begin{macro}{\CapThis}
% \changes{v0.94}{2012/02/15}{Added}
% Tells the root capping macro to cap an unaccented character.
%    \begin{macrocode}
\newcommand*{\CapThis}{\@nameauth@DoCapstrue}
%    \end{macrocode}
% \end{macro}
% \begin{macro}{\AccentCapThis}
% \changes{v2.1}{2015/11/24}{Added}
% Tells the root capping macro to cap an accented Unicode character.
%    \begin{macrocode}
\newcommand*{\AccentCapThis}{\@nameauth@Accenttrue\@nameauth@DoCapstrue}
%    \end{macrocode}
% \end{macro}
% \begin{macro}{\CapName}
% \changes{v1.5}{2013/02/22}{Added}
% Capitalize entire name.
%    \begin{macrocode}
\newcommand*{\CapName}{\@nameauth@AllThistrue}
%    \end{macrocode}
% \end{macro}
% \begin{macro}{\RevName}
% \changes{v1.5}{2013/02/22}{Added}
% Reverse name order.
%    \begin{macrocode}
\newcommand*{\RevName}{\@nameauth@RevThistrue}
%    \end{macrocode}
% \end{macro}
% \begin{macro}{\RevComma}
% \changes{v1.5}{2013/02/22}{Added}
% Last name, comma, first name.
%    \begin{macrocode}
\newcommand*{\RevComma}%
  {\@nameauth@RevThistrue\@nameauth@RevThisCommatrue}
%    \end{macrocode}
% \end{macro}
% \begin{macro}{\ShowComma}
% \changes{v1.4}{2012/07/24}{Added}
% Put comma between name and suffix one time.
%    \begin{macrocode}
\newcommand*{\ShowComma}{\@nameauth@ShowCommatrue}
%    \end{macrocode}
% \end{macro}
% \begin{macro}{\KeepAffix}
% \changes{v1.9}{2015/07/09}{Added}
% Trigger a name-suffix pair to be separated by a non-breaking space.
%    \begin{macrocode}
\newcommand*{\KeepAffix}{\@nameauth@NBSPtrue}
%    \end{macrocode}
% \end{macro}
%
% \begin{macro}{\NamesInactive}
% Switch to the ``non-formatted'' species of names.
%    \begin{macrocode}
\newcommand*{\NamesInactive}{\@nameauth@DoFormatfalse}
%    \end{macrocode}
% \end{macro}
%
% \begin{macro}{\NamesActive}
% Switch to the ``formatted'' species of names.
%    \begin{macrocode}
\newcommand*{\NamesActive}{\@nameauth@DoFormattrue}
%    \end{macrocode}
% \end{macro}
%
% \begin{macro}{\AllCapsInactive}
% Turn off global surname capitalization.
% \changes{v1.5}{2013/02/22}{Added}
%    \begin{macrocode}
\newcommand*{\AllCapsInactive}{\@nameauth@AllCapsfalse}
%    \end{macrocode}
% \end{macro}
%
% \begin{macro}{\AllCapsActive}
% Turn on global surname capitalization.
% \changes{v1.5}{2013/02/22}{Added}
%    \begin{macrocode}
\newcommand*{\AllCapsActive}{\@nameauth@AllCapstrue}
%    \end{macrocode}
% \end{macro}
%
% \begin{macro}{\ReverseInactive}
% Turn off global name reversing.
% \changes{v1.5}{2013/02/22}{Added}
%    \begin{macrocode}
\newcommand*{\ReverseInactive}{\@nameauth@RevAllfalse}
%    \end{macrocode}
% \end{macro}
%
% \begin{macro}{\ReverseActive}
% Turn on global name reversing.
% \changes{v1.5}{2013/02/22}{Added}
%    \begin{macrocode}
\newcommand*{\ReverseActive}{\@nameauth@RevAlltrue}
%    \end{macrocode}
% \end{macro}
%
% \begin{macro}{\ReverseCommaInactive}
% Turn off global ``last-name-comma-first.''
% \changes{v1.5}{2013/02/22}{Added}
%    \begin{macrocode}
\newcommand*{\ReverseCommaInactive}%
  {\@nameauth@RevAllfalse\@nameauth@RevAllCommafalse}
%    \end{macrocode}
% \end{macro}
%
% \begin{macro}{\ReverseCommaActive}
% Turn on global ``last-name-comma-first.''
% \changes{v1.5}{2013/02/22}{Added}
%    \begin{macrocode}
\newcommand*{\ReverseCommaActive}%
  {\@nameauth@RevAlltrue\@nameauth@RevAllCommatrue}
%    \end{macrocode}
% \end{macro}
%
% \begin{macro}{\IndexInactive}
% \changes{v0.94}{2012/02/15}{Added}
% turn off global indexing of names.
%    \begin{macrocode}
\newcommand*{\IndexInactive}{\@nameauth@DoIndexfalse}
%    \end{macrocode}
% \end{macro}
% 
% \begin{macro}{\IndexActive}
% \changes{v0.94}{2012/02/15}{Added}
% turn on global indexing of names.
%    \begin{macrocode}
\newcommand*{\IndexActive}{\@nameauth@DoIndextrue}
%    \end{macrocode}
% \end{macro}
%
% \begin{macro}{\IndexActual}
% \changes{v2.0}{2015/11/11}{Added}
% Change the ``actual'' character from the default.
%    \begin{macrocode}
\newcommand*{\IndexActual}[1]%
  {\global\renewcommand*\@nameauth@Actual{#1}}
%    \end{macrocode}
% \end{macro}
%
% \begin{macro}{\LocalNames}
% \changes{v2.3}{2016/01/05}{Added}
% \cmd{\LocalNames} sets |@nameauth@LocalNames| true so \cmd{\ForgetName} and \cmd{\SubvertName} do not affect both formatted and unformatted names.
%    \begin{macrocode}
\newcommand*\LocalNames{\@nameauth@LocalNamestrue}
%    \end{macrocode}
% \end{macro}
%
% \begin{macro}{\GlobalNames}
% \changes{v2.3}{2016/01/05}{Added}
% \cmd{\GlobalNames} sets |@nameauth@LocalNames| false, restoring the default behavior of \cmd{\ForgetName} and \cmd{\SubvertName}.
%    \begin{macrocode}
\newcommand*\GlobalNames{\@nameauth@LocalNamesfalse}
%    \end{macrocode}
% \end{macro}
%
% \begin{macro}{\Name}
% \changes{v2.3}{2016/01/05}{Change to interface macro}
% \cmd{\Name} calls \cmd{\NameauthName,} the interface hook.
%    \begin{macrocode}
\def\Name{\NameauthName}
%    \end{macrocode}
% \end{macro}
%
% \begin{macro}{\Name*}
% \changes{v1.4}{2012/07/24}{Refactored}
% \cmd{\Name*} sets up a long name reference and calls \cmd{\NameauthLName,} the interface hook.
%    \begin{macrocode}
\WithSuffix\def\Name*{\@nameauth@FullNametrue\NameauthLName}
%    \end{macrocode}
% \end{macro}
%
% \begin{macro}{\FName}
% \changes{v0.9}{2012/02/10}{Added}
% \changes{v1.4}{2012/07/24}{Refactored}
% \cmd{\FName} sets up a short name reference and calls \cmd{\NameauthFName,} the interface hook.
%    \begin{macrocode}
\def\FName{\@nameauth@FirstNametrue\NameauthFName}
%    \end{macrocode}
% \end{macro}
%
% \begin{macro}{\FName*}
% \changes{v1.4}{2012/07/24}{Refactored}
% \cmd{\FName} and \cmd{\FName*} are identical.
%    \begin{macrocode}
\WithSuffix\def\FName*{\@nameauth@FirstNametrue\NameauthFName}
%    \end{macrocode}
% \end{macro}
% \clearpage\noindent
% \begin{macro}{\AKA}
% \changes{v0.85}{2012/02/05}{Add comma suppression}
% \changes{v0.9}{2012/02/10}{Add starred mode; redesigned}
% \changes{v1.26}{2012/04/24}{Fix sorting of name suffixes}
% \changes{v1.5}{2013/02/22}{Add reversing and caps}
% \changes{v2.0}{2015/11/11}{Isolate malformed input; trim spaces; redesign tagging}
% \changes{v2.1}{2015/11/24}{Isolate Unicode issues}
% \changes{v2.3}{2016/01/05}{Expand starred mode}
% \cmd{\AKA} prints an alternate name and creates index cross-references. It prevents multiple generation of cross-references and suppresses double periods.
%    \begin{macrocode}
\newcommandx*\AKA[5][1=\@empty, 3=\@empty, 5=\@empty]%
{%
  \let\ex\expandafter%
  \leavevmode\hbox{}%
%    \end{macrocode}
% Names occur in horizontal mode; we ensure that. Next we make copies of the arguments to test them and make parsing decisions.
%    \begin{macrocode}
  \protected@edef\testa{#1}%
  \protected@edef\arga{\trim@spaces{#1}}%
  \protected@edef\testb{\trim@spaces{#2}}%
  \protected@edef\testbr{\@nameauth@Root{#2}}%
  \protected@edef\testc{#3}%
  \protected@edef\argc{\trim@spaces{#3}}%
  \protected@edef\testd{\trim@spaces{#4}}%
  \protected@edef\testdr{\@nameauth@Root{#4}}%
  \protected@edef\teste{#5}%
  \protected@edef\arge{\trim@spaces{#5}}%
  \def\csd{\@nameauth@Clean{#4}}%
  \def\csde{\@nameauth@Clean{#4#5}}%
  \def\cscd{\@nameauth@Clean{#3!#4}}%
%    \end{macrocode}
% Test for malformed input.
%    \begin{macrocode}
  \ifx\testb\@empty
    \PackageError{nameauth}%
    {macro \AKA: Essential name missing}%
  \else
    \ifx\csb\@empty
      \PackageError{nameauth}%
      {macro \AKA: Essential name malformed}%
    \fi
  \fi
  \ifx\testd\@empty
    \PackageError{nameauth}%
    {macro \AKA: Essential name missing}%
  \else
    \ifx\csd\@empty
      \PackageError{nameauth}%
      {macro \AKA: Essential name malformed}%
    \fi
  \fi
%    \end{macrocode}
% If global caps. reversing, and commas are true, set the local flags true.
%    \begin{macrocode}
  \if@nameauth@AllCaps\@nameauth@AllThistrue\fi
  \if@nameauth@RevAll\@nameauth@RevThistrue\fi
  \if@nameauth@RevAllComma\@nameauth@RevThisCommatrue\fi
%    \end{macrocode}
% \clearpage\noindent
% The code below handles non-breaking and regular spaces, as well as commas, in the text and the index by setting up which kind we want to use. These will be inserted as appropriate as the output is formatted.
%    \begin{macrocode}
  \protected@edef\ISpace{\space}%
  \protected@edef\Space{\space}%
  \if@nameauth@NBSP\protected@edef\Space{\nobreakspace}\fi
  \if@nameauth@AlwaysComma
    \protected@edef\ISpace{,\space}%
    \protected@edef\Space{,\space}%
    \if@nameauth@NBSP\protected@edef\Space{,\nobreakspace}\fi
  \fi
  \if@nameauth@ShowComma
    \protected@edef\ISpace{,\space}%
    \protected@edef\Space{,\space}%
    \if@nameauth@NBSP\protected@edef\Space{,\nobreakspace}\fi
  \fi
%    \end{macrocode}
% The section below parses any ``surnames'' into name/suffix pairs and figures out how to capitalize and reverse them as needed, storing the results for the main parser. We have to handle several more combinations here than with \cmd{\Name} above.
%    \begin{macrocode}
  \protected@edef\Shortb{\@nameauth@Root{#2}}%
  \protected@edef\Shortd{\@nameauth@Root{#4}}%
  \if@nameauth@DoCaps
    \protected@edef\CapShort{\@nameauth@CapRoot{#4}}%
  \else
    \let\CapShort\Shortd
  \fi
  \protected@edef\AllCapShort{\@nameauth@AllCapRoot{#4}}%
  \ifx\testb\testbr
    \let\SNNb\Shortb%
    \protected@edef\Suffb{\@empty}%
  \else
    \protected@edef\Suffb{\@nameauth@Suffix{#2}}%
    \protected@edef\SNNb{\Shortb\ISpace\Suffb}%
  \fi
  \ifx\testd\testdr
    \protected@edef\Suffd{\@empty}%
    \let\ISNNd\Shortd%
    \let\Reversed\Shortd%
    \let\SNNd\Shortd%
    \if@nameauth@DoCaps
      \let\SNNd\CapShort%
      \let\Reversed\CapShort%
    \fi
    \if@nameauth@AllThis
      \let\SNNd\AllCapShort%
      \let\Reversed\AllCapShort%
    \fi
%    \end{macrocode}
% \clearpage
%    \begin{macrocode}
  \else
    \protected@edef\Suffd{\@nameauth@Suffix{#4}}%
    \protected@edef\ISNNd{\Shortd\ISpace\Suffd}%
    \protected@edef\Reversed{\Suffd\Space\Shortd}%
    \protected@edef\SNNd{\Shortd\Space\Suffd}%
    \if@nameauth@DoCaps
      \protected@edef\Reversed{\Suffd\Space\CapShort}%
      \protected@edef\SNNd{\CapShort\Space\Suffd}%
    \fi
    \if@nameauth@AllThis
      \protected@edef\Reversed{\Suffd\Space\AllCapShort}%
      \protected@edef\SNNd{\AllCapShort\Space\Suffd}%
    \fi
  \fi
%    \end{macrocode}
% Here we parse names. 
%    \begin{macrocode}
  \ifx\testc\@empty
    \ifx\teste\@empty
%    \end{macrocode}
% For mononyms and name/suffix pairs: If a pseudonym has not been generated by \cmd{\AKA} or \cmd{\ExcludeName}, and if the proposed pseudonym is not already a mainmatter or frontmatter name, then generate a \textit{see} reference from the pseudonym to a name that will appear in the index.
%    \begin{macrocode}
      \ifcsname\csd!PN\endcsname
        \PackageWarning{nameauth}%
        {macro \AKA: XRef: #4 exists}%
      \else
        \ifcsname\csd!MN\endcsname
          \PackageWarning{nameauth}%
          {macro \AKA: Name reference: #4 exists; no xref}%
        \else
          \ifcsname\csd!NF\endcsname
            \PackageWarning{nameauth}%
            {macro \AKA: Name reference: #4 exists; no xref}%
          \else
            \csgdef{\csd!PN}{}%
            \ifx\testa\@empty
              \@nameauth@Index{\csd}%
                {\ISNNd|see{\SNNb}}%
            \else
              \ifx\Suffb\@empty
                \@nameauth@Index{\csd}%
                  {\ISNNd|see{\SNNb,\space\arga}}%
              \else
                \@nameauth@Index{\csd}%
                  {\ISNNd|see{\Shortb,\space\arga,\space\Suffb}}%
              \fi
            \fi
          \fi
        \fi
      \fi
%    \end{macrocode}
% \clearpage\noindent Print an appropriate version of the pseudonym (capped, reversed, etc.) in the text with no special formatting even if no cross-reference was generated in the index. Again, \cmd{\expandafter} is used for the punctuation detection.
%    \begin{macrocode}
      \if@nameauth@RevThisComma
        \protected@edef\ISpace{,\space}%
        \protected@edef\Space{,\space}%
        \if@nameauth@NBSP
          \protected@edef\Space{,\nobreakspace}%
        \fi
      \fi
      \if@nameauth@RevThis
        \ex\@nameauth@FmtName\ex{\Reversed}%
      \else
        \ex\@nameauth@FmtName\ex{\SNNd}%
      \fi
    \else
%    \end{macrocode}
% For name/affix using the old syntax: If a pseudonym has not been generated by \cmd{\AKA} or \cmd{\ExcludeName}, and if the proposed pseudonym is not already a mainmatter or frontmatter name, then generate a \textit{see} reference from the pseudonym to a name that will appear in the index.
%    \begin{macrocode}
      \ifcsname\csde!PN\endcsname
        \PackageWarning{nameauth}%
        {macro \AKA: XRef: #4 #5 exists}%
      \else
        \ifcsname\csde!MN\endcsname
          \PackageWarning{nameauth}%
          {macro \AKA: Name reference: #4 #5 exists; no xref}%
        \else
          \ifcsname\csde!NF\endcsname
            \PackageWarning{nameauth}%
            {macro \AKA: Name reference: #4 #5 exists; no xref}%
          \else
            \csgdef{\csde!PN}{}%
            \ifx\testa\@empty
              \@nameauth@Index{\csde}%
                {\ISNNd\ISpace\arge|see{\SNNb}}%
            \else
              \ifx\Suffb\@empty
                \@nameauth@Index{\csde}%
                  {\ISNNd\ISpace\arge|see{\SNNb,\space\arga}}%
              \else
                \@nameauth@Index{\csde}%
                {\ISNNd\ISpace\arge|see{\Shortb,\space\arga,\space\Suffb}}%
              \fi
            \fi
          \fi
        \fi
      \fi
%    \end{macrocode}
% \clearpage\noindent Print an appropriate version of the pseudonym (capped, reversed, etc.) in the text with no special formatting even if no cross-reference was generated in the index.
%    \begin{macrocode}
      \if@nameauth@RevThisComma
        \protected@edef\ISpace{,\space}%
        \protected@edef\Space{,\space}%
        \if@nameauth@NBSP
          \protected@edef\Space{,\nobreakspace}%
        \fi
      \fi
      \if@nameauth@AltAKA
        \ex\@nameauth@FmtName\ex{\arge}%
      \else
        \if@nameauth@RevThis
          \ex\@nameauth@FmtName\ex{\ex\arge\ex\Space\SNNd}%
        \else
          \ex\@nameauth@FmtName\ex{\ex\SNNd\ex\space\arge}%
        \fi
      \fi
    \fi
  \else
%    \end{macrocode}
% For Western names and affixes: If a pseudonym has not been generated by \cmd{\AKA} or \cmd{\ExcludeName}, and if the proposed pseudonym is not already a mainmatter or frontmatter name, then generate a \textit{see} reference from the pseudonym to a name that will appear in the index.
%    \begin{macrocode}
    \ifcsname\cscd!PN\endcsname
      \PackageWarning{nameauth}%
      {macro \AKA: XRef: #3 #4 exists}%
    \else
      \ifcsname\cscd!MN\endcsname
        \PackageWarning{nameauth}%
        {macro \AKA: Name reference: #3 #4 exists; no xref}%
      \else
        \ifcsname\cscd!NF\endcsname
          \PackageWarning{nameauth}%
          {macro \AKA: Name reference: #3 #4 exists; no xref}%
        \else
          \csgdef{\cscd!PN}{}%
          \ifx\testa\@empty
            \ifx\Suffd\@empty
              \@nameauth@Index{\cscd}%
                {\ISNNd,\space\argc|see{\SNNb}}%
            \else
              \@nameauth@Index{\cscd}%
                {\Shortd,\space\argc,\space\Suffd|see{\SNNb}}%
            \fi
          \else
            \ifx\Suffb\@empty
              \ifx\Suffd\@empty
                \@nameauth@Index{\cscd}%
                  {\ISNNd,\space\argc|see{\SNNb,\space\arga}}%
              \else
                \@nameauth@Index{\cscd}%
                {\Shortd,\space\argc,\space\Suffd|see{\SNNb,\space\arga}}%
              \fi
            \else
              \ifx\Suffd\@empty
                \@nameauth@Index{\cscd}%
                {\ISNNd,\space\argc|see{\Shortb,\space\arga,\space\Suffb}}%
              \else
                \@nameauth@Index{\cscd}%
  {\Shortd,\space\argc,\space\Suffd|see{\Shortb,\space\arga,\space\Suffb}}%
              \fi
            \fi
          \fi
        \fi
      \fi
    \fi
%    \end{macrocode}
% \noindent Print an appropriate version of the pseudonym (capped, reversed, etc.) in the text with no special formatting even if no cross-reference was generated in the index.
%    \begin{macrocode}
    \if@nameauth@RevThisComma
      \protected@edef\ISpace{,\space}%
      \protected@edef\Space{,\space}%
      \if@nameauth@NBSP\protected@edef\Space{,\nobreakspace}\fi
    \fi
    \ifx\teste\@empty
      \let\FNN\argc%
    \else
      \let\FNN\arge%
    \fi
    \if@nameauth@AltAKA
      \ex\@nameauth@FmtName\ex{\FNN}%
    \else
      \if@nameauth@RevThis
        \ex\@nameauth@FmtName\ex{\ex\SNNd\ex\Space\FNN}%
      \else
        \ex\@nameauth@FmtName\ex{\ex\FNN\ex\space\SNNd}%
      \fi
    \fi
  \fi
%    \end{macrocode}
% Reset all the ``per name'' Boolean values.
%    \begin{macrocode}
  \@nameauth@NBSPfalse%
  \@nameauth@AltAKAfalse%
  \@nameauth@DoCapsfalse%
  \@nameauth@Accentfalse%
  \@nameauth@AllThisfalse%
  \@nameauth@ShowCommafalse%
  \@nameauth@RevThisfalse%
  \@nameauth@RevThisCommafalse%
%    \end{macrocode}
% Call the full stop detection.
%    \begin{macrocode}
  \if@nameauth@Punct\expandafter\@nameauth@CheckDot\fi
}
%    \end{macrocode}
% \end{macro}
%
% \begin{macro}{\AKA*}
% \changes{v0.9}{2012/02/10}{Added}
% This starred form sets a Boolean to print only the alternate name argument, if that exists, and calls \cmd{\AKA}.
%    \begin{macrocode}
\WithSuffix\def\AKA*{\@nameauth@AltAKAtrue\AKA}
%    \end{macrocode}
% \end{macro}
% \clearpage\noindent
%
% \begin{macro}{\PName}
% \changes{v0.85}{2012/02/05}{Add comma suppression}
% \changes{v2.3}{2016/01/05}{Work directly with hooks}
% \cmd{\PName} is a convenience macro that calls \cmd{\NameauthName}, then \cmd{\AKA}.
%    \begin{macrocode}
\newcommandx*\PName[5][1=\@empty,3=\@empty,5=\@empty]%
{%
  \NameauthName[#1]{#2}\space(\AKA[#1]{#2}[#3]{#4}[#5])%
}
%    \end{macrocode}
% \end{macro}
%
% \begin{macro}{\PName*}
% \changes{v0.85}{2012/02/05}{Add comma suppression}
% This sets up a long name reference and calls \cmd{\PName}.
%    \begin{macrocode}
\WithSuffix\def\PName*{\@nameauth@FullNametrue\PName}
%    \end{macrocode}
% \end{macro}
%
% \begin{macro}{\TagName}
% \changes{v1.2}{2012/02/25}{Added}
% \changes{v1.9}{2015/07/09}{Fix cs collisions}
% \changes{v2.0}{2015/11/11}{Isolate malformed input; redesign tagging}
% This creates an index entry tag that is applied to a name that is not already used as a cross reference via \cmd{\AKA}.
%    \begin{macrocode}
\newcommandx*\TagName[4][1=\@empty, 3=\@empty]%
{%
  \protected@edef\testa{#1}%
  \protected@edef\testb{\trim@spaces{#2}}%
  \protected@edef\testc{#3}%
  \def\csb{\@nameauth@Clean{#2}}%
  \def\csbc{\@nameauth@Clean{#2#3}}%
  \def\csab{\@nameauth@Clean{#1!#2}}%
%    \end{macrocode}
% We make copies of the arguments to test them and then we parse the arguments, defining the tag control sequences.
%    \begin{macrocode}
  \ifx\testb\@empty
    \PackageError{nameauth}%
    {macro \TagName: Essential name missing}%
  \else
    \ifx\csb\@empty
      \PackageError{nameauth}%
      {macro \TagName: Essential name malformed}%
    \fi
  \fi
  \ifx\testa\@empty
    \ifx\testc\@empty
      \ifcsname\csb!PN\endcsname
        \PackageWarning{nameauth}%
        {macro \TagName: not tagging xref: #2}%
      \else
        \csgdef{\csb!TAG}{#4}%
      \fi
    \else
      \ifcsname\csbc!PN\endcsname
        \PackageWarning{nameauth}%
        {macro \TagName: not tagging xref: #2 #3}%
      \else
        \csgdef{\csbc!TAG}{#4}%
      \fi
    \fi
  \else
    \ifcsname\csab!PN\endcsname
      \PackageWarning{nameauth}%
      {macro \TagName: not tagging xref: #1 #2}%
    \else
      \csgdef{\csab!TAG}{#4}%
    \fi
  \fi
}
%    \end{macrocode}
% \end{macro}
% \clearpage\noindent
%
% \begin{macro}{\UntagName}
% \changes{v1.2}{2012/02/25}{Added}
% \changes{v1.9}{2015/07/09}{Ensure global undef, fix cs collisions}
% \changes{v2.0}{2015/11/11}{Isolate malformed input; redesign tagging}
% This deletes an index entry tag.
%    \begin{macrocode}
\newcommandx*\UntagName[3][1=\@empty, 3=\@empty]%
{%
  \protected@edef\testa{#1}%
  \protected@edef\testb{\trim@spaces{#2}}%
  \protected@edef\testc{#3}%
  \def\csb{\@nameauth@Clean{#2}}%
  \def\csbc{\@nameauth@Clean{#2#3}}%
  \def\csab{\@nameauth@Clean{#1!#2}}%
%    \end{macrocode}
% We make copies of the arguments to test them and then we parse the arguments, undefining the tag control sequences.
%    \begin{macrocode}
  \ifx\testb\@empty
    \PackageError{nameauth}%
    {macro \UntagName: Essential name missing}%
  \else
    \ifx\csb\@empty
      \PackageError{nameauth}%
      {macro \UntagName: Essential name malformed}%
    \fi
  \fi
  \ifx\testa\@empty
    \ifx\testc\@empty
      \global\csundef{\csb!TAG}%
    \else
      \global\csundef{\csbc!TAG}%
    \fi
  \else
    \global\csundef{\csab!TAG}%
  \fi
}
%    \end{macrocode}
% \end{macro}
% \clearpage\noindent
%
% \begin{macro}{\PretagName}
% \changes{v2.0}{2015/11/11}{Added}
% This creates an index entry tag that is applied before a name.
%    \begin{macrocode}
\newcommandx*\PretagName[4][1=\@empty, 3=\@empty]%
{%
  \protected@edef\testa{#1}%
  \protected@edef\testb{\trim@spaces{#2}}%
  \protected@edef\testc{#3}%
  \def\csb{\@nameauth@Clean{#2}}%
  \def\csbc{\@nameauth@Clean{#2#3}}%
  \def\csab{\@nameauth@Clean{#1!#2}}%
%    \end{macrocode}
% We make copies of the arguments to test them and then we parse the arguments, defining the tag control sequences.
%    \begin{macrocode}
  \ifx\testb\@empty
    \PackageError{nameauth}%
    {macro \TagName: Essential name missing}%
  \else
    \ifx\csb\@empty
      \PackageError{nameauth}%
      {macro \TagName: Essential name malformed}%
    \fi
  \fi
  \ifx\testa\@empty
    \ifx\testc\@empty
      \ifcsname\csb!PN\endcsname
        \PackageWarning{nameauth}%
        {macro \PretagName: tagging xref: #2}%
      \fi
      \if@nameauth@Pretag\csgdef{\csb!PRE}{#4\@nameauth@Actual}\fi
    \else
      \ifcsname\csbc!PN\endcsname
        \PackageWarning{nameauth}%
        {macro \PretagName: tagging xref: #2 #3}%
      \fi
      \if@nameauth@Pretag\csgdef{\csbc!PRE}{#4\@nameauth@Actual}\fi
    \fi
  \else
    \ifcsname\csab!PN\endcsname
      \PackageWarning{nameauth}%
      {macro \PretagName: tagging xref: #1 #2}%
    \fi
    \if@nameauth@Pretag\csgdef{\csab!PRE}{#4\@nameauth@Actual}\fi
  \fi
}
%    \end{macrocode}
% \end{macro}
% \clearpage\noindent
%
% \begin{macro}{\IndexName}
% \changes{v0.75}{2012/01/19}{Use current arguments}
% \changes{v0.85}{2012/02/05}{Add comma suppression}
% \changes{v1.26}{2012/04/24}{Fix name suffix sorting}
% \changes{v2.0}{2015/11/11}{Isolate malformed input; trim spaces; redesign tagging}
% This creates an index entry that is not already a pseudonym. It prints nothing. It does ensure consistent formatting.
%    \begin{macrocode}
\newcommandx*\IndexName[3][1=\@empty, 3=\@empty]%
{%
  \protected@edef\testa{#1}%
  \protected@edef\arga{\trim@spaces{#1}}%
  \protected@edef\testb{\trim@spaces{#2}}%
  \protected@edef\testbr{\@nameauth@Root{#2}}%
  \protected@edef\testc{#3}%
  \protected@edef\argc{\trim@spaces{#3}}%
  \def\csb{\@nameauth@Clean{#2}}%
  \def\csbc{\@nameauth@Clean{#2#3}}%
  \def\csab{\@nameauth@Clean{#1!#2}}%
%    \end{macrocode}
% We make copies of the arguments to test them and make parsing decisions. Below we handle the types of spaces or commas that will be inserted into the index entries.
%    \begin{macrocode}
  \ifx\testb\@empty
    \PackageError{nameauth}%
    {macro \IndexName: Essential name missing}%
  \else
    \ifx\csb\@empty
      \PackageError{nameauth}%
      {macro \IndexName: Essential name malformed}%
    \fi
  \fi
  \protected@edef\Space{\space}%
  \if@nameauth@AlwaysComma
    \protected@edef\Space{,\space}%
  \fi
  \if@nameauth@ShowComma
    \protected@edef\Space{,\space}%
  \fi
%    \end{macrocode}
% Now we deal with suffixes, and whether to handle them for Western or Eastern names.
%    \begin{macrocode}
  \let\Short\testbr%
  \ifx\testb\testbr
    \let\SNN\Short%
    \protected@edef\Suff{\@empty}%
  \else
    \protected@edef\Suff{\@nameauth@Suffix{#2}}%
    \protected@edef\SNN{\Short\Space\Suff}%
  \fi
%    \end{macrocode}
% \clearpage\noindent
% We create the appropriate index entries with tags, letting the internal indexing macro sort that out. We do not create an index entry in the case that a name has been used as a pseudonym by \cmd{\AKA} or \cmd{\ExcludeName}.
%    \begin{macrocode}
  \ifx\testa\@empty
    \ifx\testc\@empty
      \ifcsname\csb!PN\endcsname
        \PackageWarning{nameauth}%
        {macro \IndexName: XRef: #2 exists}%
      \else
        \@nameauth@Index{\csb}{\SNN}%
      \fi
    \else
      \ifcsname\csbc!PN\endcsname
        \PackageWarning{nameauth}%
        {macro \IndexName: XRef: #2 #3 exists}%
      \else
        \@nameauth@Index{\csbc}{\SNN\Space\argc}%
      \fi
    \fi
  \else
    \ifcsname\csab!PN\endcsname
      \PackageWarning{nameauth}%
      {macro \IndexName: XRef: #1 #2 exists}%
    \else
      \ifx\Suff\@empty
        \@nameauth@Index{\csab}{\Short,\space\arga}%
      \else
        \@nameauth@Index{\csab}{\Short,\space\arga,\space\Suff}%
      \fi
    \fi
  \fi
  \@nameauth@ShowCommafalse%
}
%    \end{macrocode}
% \end{macro}
%
% \begin{macro}{\ExcludeName}
% \changes{v0.94}{2012/02/15}{Added}
% \changes{v2.0}{2015/11/11}{Isolate malformed input}
% \changes{v2.3}{2016/01/05}{Distinguish excluded names from regular aliases}
% This macro prevents a name from being formatted or indexed, making \cmd{\Name} and friends print their arguments, emit a warning, and continue.
%    \begin{macrocode}
\newcommandx*\ExcludeName[3][1=\@empty, 3=\@empty]%
{%
  \protected@edef\testa{#1}%
  \protected@edef\testb{\trim@spaces{#2}}%
  \protected@edef\testc{#3}%
  \def\csb{\@nameauth@Clean{#2}}%
  \def\csbc{\@nameauth@Clean{#2#3}}%
  \def\csab{\@nameauth@Clean{#1!#2}}%
%    \end{macrocode}
% We make copies of the arguments to test them and make parsing decisions. Below we parse the name arguments and create a pseudonym control sequence if it does not exist.
%    \begin{macrocode}
  \ifx\testb\@empty
    \PackageError{nameauth}%
    {macro \ExcludeName: Essential name missing}%
  \else
    \ifx\csb\@empty
      \PackageError{nameauth}%
      {macro \ExcludeName: Essential name malformed}%
    \fi
  \fi
  \ifx\testa\@empty
    \ifx\testc\@empty
      \ifcsname\csb!PN\endcsname
        \PackageWarning{nameauth}%
        {macro \ExcludeName: Xref: #2 already exists}%
      \else
        \ifcsname\csb!MN\endcsname
          \PackageWarning{nameauth}%
          {macro \ExcludeName: Reference: #2 exists; no exclusion}%
        \else
          \ifcsname\csb!NF\endcsname
            \PackageWarning{nameauth}%
            {macro \ExcludeName: Reference: #2 exists; no exclusion}%
          \else
            \csgdef{\csb!PN}{!}%
          \fi
        \fi
      \fi
    \else
      \ifcsname\csbc!PN\endcsname
        \PackageWarning{nameauth}%
        {macro \ExcludeName: Xref: #2 #3 already exists}%
      \else
        \ifcsname\csbc!MN\endcsname
          \PackageWarning{nameauth}%
          {macro \ExcludeName: Reference: #2 #3 exists; no exclusion}%
        \else
          \ifcsname\csbc!NF\endcsname
            \PackageWarning{nameauth}%
            {macro \ExcludeName: Reference: #2 #3 exists; no exclusion}%
          \else
            \csgdef{\csbc!PN}{!}%
          \fi
        \fi
      \fi
    \fi
  \else
    \ifcsname\csab!PN\endcsname
      \PackageWarning{nameauth}%
      {macro \ExcludeName: XRef: #1 #2 already exists}%
    \else
      \ifcsname\csab!MN\endcsname
        \PackageWarning{nameauth}%
        {macro \ExcludeName: Reference: #1 #2 exists; no exclusion}%
      \else
        \ifcsname\csab!NF\endcsname
          \PackageWarning{nameauth}%
          {macro \ExcludeName: Reference: #1 #2 exists; no exclusion}%
        \else
          \csgdef{\csab!PN}{!}%
        \fi
      \fi
    \fi
  \fi
}
%    \end{macrocode}
% \end{macro}
%
% \begin{macro}{\IfAKA}
% \changes{v2.3}{2016/01/05}{Added}
% This macro expands one path if a see-reference name exists, another if it does not exist, and a third if it is excluded.
%    \begin{macrocode}
\newcommandx\IfAKA[6][1=\@empty, 3=\@empty]%
{%
  \protected@edef\testa{#1}%
  \protected@edef\testb{\trim@spaces{#2}}%
  \protected@edef\testc{#3}%
  \def\csb{\@nameauth@Clean{#2}}%
  \def\csbc{\@nameauth@Clean{#2#3}}%
  \def\csab{\@nameauth@Clean{#1!#2}}%
%    \end{macrocode}
% We make copies of the arguments to test them and make parsing decisions. Below we parse the name arguments and create a pseudonym control sequence if it does not exist.
%    \begin{macrocode}
  \ifx\testb\@empty
    \PackageError{nameauth}%
    {macro \ExcludeName: Essential name missing}%
  \else
    \ifx\csb\@empty
      \PackageError{nameauth}%
      {macro \ExcludeName: Essential name malformed}%
    \fi
  \fi
  \ifx\testa\@empty
    \ifx\testc\@empty
      \ifcsname\csb!PN\endcsname
        \ifcsempty{\csb!PN}{#4}{#6}%
      \else#5\fi
    \else
      \ifcsname\csbc!PN\endcsname
        \ifcsempty{\csbc!PN}{#4}{#6}%
      \else#5\fi
    \fi
  \else
    \ifcsname\csab!PN\endcsname
      \ifcsempty{\csab!PN}{#4}{#6}%
    \else#5\fi
  \fi
}
%    \end{macrocode}
% \end{macro}
%
% \begin{macro}{\IfFrontName}
% \changes{v2.3}{2016/01/05}{Added}
% This macro expands one path if a front matter name exists, or else the other if it does not exist.
%    \begin{macrocode}
\newcommandx\IfFrontName[5][1=\@empty, 3=\@empty]%
{%
  \protected@edef\testa{#1}%
  \protected@edef\testb{\trim@spaces{#2}}%
  \protected@edef\testc{#3}%
  \def\csb{\@nameauth@Clean{#2}}%
  \def\csbc{\@nameauth@Clean{#2#3}}%
  \def\csab{\@nameauth@Clean{#1!#2}}%
%    \end{macrocode}
% \clearpage\noindent
% We make copies of the arguments to test them and make parsing decisions. Below we parse the name arguments and create a pseudonym control sequence if it does not exist.
%    \begin{macrocode}
  \ifx\testb\@empty
    \PackageError{nameauth}%
    {macro \ExcludeName: Essential name missing}%
  \else
    \ifx\csb\@empty
      \PackageError{nameauth}%
      {macro \ExcludeName: Essential name malformed}%
    \fi
  \fi
  \ifx\testa\@empty
    \ifx\testc\@empty
      \ifcsname\csb!NF\endcsname#4\else#5\fi
    \else
      \ifcsname\csbc!NF\endcsname#4\else#5\fi
    \fi
  \else
    \ifcsname\csab!NF\endcsname#4\else#5\fi
  \fi
}
%    \end{macrocode}
% \end{macro}
%
% \begin{macro}{\IfMainName}
% \changes{v2.3}{2016/01/05}{Added}
% This macro expands one path if a main matter name exists, or else the other if it does not exist.
%    \begin{macrocode}
\newcommandx\IfMainName[5][1=\@empty, 3=\@empty]%
{%
  \protected@edef\testa{#1}%
  \protected@edef\testb{\trim@spaces{#2}}%
  \protected@edef\testc{#3}%
  \def\csb{\@nameauth@Clean{#2}}%
  \def\csbc{\@nameauth@Clean{#2#3}}%
  \def\csab{\@nameauth@Clean{#1!#2}}%
%    \end{macrocode}
% We make copies of the arguments to test them and make parsing decisions. Below we parse the name arguments and create a pseudonym control sequence if it does not exist.
%    \begin{macrocode}
  \ifx\testb\@empty
    \PackageError{nameauth}%
    {macro \ExcludeName: Essential name missing}%
  \else
    \ifx\csb\@empty
      \PackageError{nameauth}%
      {macro \ExcludeName: Essential name malformed}%
    \fi
  \fi
  \ifx\testa\@empty
    \ifx\testc\@empty
      \ifcsname\csb!MN\endcsname#4\else#5\fi
    \else
      \ifcsname\csbc!MN\endcsname#4\else#5\fi
    \fi
  \else
    \ifcsname\csab!MN\endcsname#4\else#5\fi
  \fi
}
%    \end{macrocode}
% \end{macro}
%
% \begin{macro}{\ForgetName}
% \changes{v0.75}{2012/01/19}{New argument added}
% \changes{v1.9}{2015/07/09}{Ensure global undef}
% \changes{v2.0}{2015/11/11}{Isolate malformed input}
% \changes{v2.3}{2016/01/05}{Changed to allow global or local behavior}
% This undefines a control sequence to force the ``first use'' option of \cmd{\Name}.
%    \begin{macrocode}
\newcommandx*\ForgetName[3][1=\@empty, 3=\@empty]%
{%
  \protected@edef\testa{#1}%
  \protected@edef\testb{\trim@spaces{#2}}%
  \protected@edef\testc{#3}%
  \def\csb{\@nameauth@Clean{#2}}%
  \def\csbc{\@nameauth@Clean{#2#3}}%
  \def\csab{\@nameauth@Clean{#1!#2}}%
%    \end{macrocode}
% We make copies of the arguments to test them.
%    \begin{macrocode}
  \ifx\testb\@empty
    \PackageError{nameauth}%
    {macro \ForgetName: Essential name missing}%
  \else
    \ifx\csb\@empty
      \PackageError{nameauth}%
      {macro \ForgetName: Essential name malformed}%
    \fi
  \fi
%    \end{macrocode}
% Now we parse the arguments, undefining the control sequences either locally by section type or globally. |@nameauth@LocalNames| toggles the local or global behavior, while |@nameauth@DoFormat| selects the type of name.
%    \begin{macrocode}
  \ifx\testa\@empty
    \ifx\testc\@empty
      \if@nameauth@LocalNames
        \if@nameauth@DoFormat
          \global\csundef{\csb!MN}%
        \else
          \global\csundef{\csb!NF}%
        \fi
      \else
        \global\csundef{\csb!MN}%
        \global\csundef{\csb!NF}%
      \fi
    \else
      \if@nameauth@LocalNames
        \if@nameauth@DoFormat
          \global\csundef{\csbc!MN}%
        \else
          \global\csundef{\csbc!NF}%
        \fi
      \else
        \global\csundef{\csbc!MN}%
        \global\csundef{\csbc!NF}%
      \fi
    \fi
  \else
    \if@nameauth@LocalNames
      \if@nameauth@DoFormat
        \global\csundef{\csab!MN}%
      \else
        \global\csundef{\csab!NF}%
      \fi
%    \end{macrocode}
% \clearpage\noindent
%    \begin{macrocode}
    \else
      \global\csundef{\csab!MN}%
      \global\csundef{\csab!NF}%
    \fi
  \fi
}
%    \end{macrocode}
% \end{macro}
%
% \begin{macro}{\SubvertName}
% \changes{v0.9}{2012/02/10}{Added}
% \changes{v2.0}{2015/11/11}{Isolate malformed input}
% \changes{v2.3}{2016/01/05}{Changed to allow global or local behavior}
% This defines a control sequence to suppress the ``first use'' of \cmd{\Name}.
%    \begin{macrocode}
\newcommandx*\SubvertName[3][1=\@empty, 3=\@empty]%
{%
  \protected@edef\testa{#1}%
  \protected@edef\testb{\trim@spaces{#2}}%
  \protected@edef\testc{#3}%
  \def\csb{\@nameauth@Clean{#2}}%
  \def\csbc{\@nameauth@Clean{#2#3}}%
  \def\csab{\@nameauth@Clean{#1!#2}}%
%    \end{macrocode}
% We make copies of the arguments to test them.
%    \begin{macrocode}
  \ifx\testb\@empty
    \PackageError{nameauth}%
    {macro \SubvertName: Essential name missing}%
  \else
    \ifx\csb\@empty
      \PackageError{nameauth}%
      {macro \SubvertName: Essential name malformed}%
    \fi
  \fi
%    \end{macrocode}
% Now we parse the arguments, defining the control sequences either locally by section type or globally. |@nameauth@LocalNames| toggles the local or global behavior, while |@nameauth@DoFormat| selects the type of name.
%    \begin{macrocode}
  \ifx\testa\@empty
    \ifx\testc\@empty
      \if@nameauth@LocalNames
        \if@nameauth@DoFormat
          \csgdef{\csb!MN}{}%
        \else
          \csgdef{\csb!NF}{}%
        \fi
      \else
        \csgdef{\csb!MN}{}%
        \csgdef{\csb!NF}{}%
      \fi
    \else
      \if@nameauth@LocalNames
        \if@nameauth@DoFormat
          \csgdef{\csbc!MN}{}%
        \else
          \csgdef{\csbc!NF}{}%
        \fi
      \else
        \csgdef{\csbc!MN}{}%
        \csgdef{\csbc!NF}{}%
      \fi
    \fi
%    \end{macrocode}
% \clearpage\noindent
%    \begin{macrocode}
  \else
    \if@nameauth@LocalNames
      \if@nameauth@DoFormat
        \csgdef{\csab!MN}{}%
      \else
        \csgdef{\csab!NF}{}%
      \fi
    \else
      \csgdef{\csab!MN}{}%
      \csgdef{\csab!NF}{}%
    \fi
  \fi}
%    \end{macrocode}
% \end{macro}
%
% \begin{environment}{nameauth}
% \changes{v1.6}{2013/03/10}{Added}
% \changes{v2.0}{2015/11/11}{Redesigned argument handling}
% \changes{v2.11}{2015/11/29}{Bugfix}
% The |nameauth| environment provides a means to implement shorthand references to names in a document.
%    \begin{macrocode}
\newenvironment{nameauth}{%
  \begingroup%
  \let\ex\expandafter%
  \csdef{<}##1&##2&##3&##4>{%
    \protected@edef\arga{\trim@spaces{##1}}%
    \protected@edef\testb{\trim@spaces{##2}}%
    \protected@edef\testc{\trim@spaces{##3}}%
    \protected@edef\testd{\trim@spaces{##4}}%
    \newtoks\tokb%
    \newtoks\tokc%
    \newtoks\tokd%
    \tokb\expandafter{##2}%
    \tokc\expandafter{##3}%
    \tokd\expandafter{##4}%
    \ifx\arga\@empty
      \PackageError{nameauth}%
      {environment nameauth: Control sequence missing}%
    \else
      \ifx\testc\@empty
        \PackageError{nameauth}%
        {environment nameauth: Essential name missing}%
      \else
        \ifcsname\arga\endcsname
          \PackageWarning{nameauth}%
          {environment nameauth: Redefinition of shorthands}%
        \fi
        \ifx\testd\@empty
          \ifx\testb\@empty
            \ex\csgdef\ex{\ex\arga\ex}\ex{\ex\NameauthName\ex{\the\tokc}}%
            \ex\csgdef\ex{\ex L\ex\arga\ex}\ex{\ex\@nameauth@FullNametrue%
              \ex\NameauthLName\ex{\the\tokc}}%
            \ex\csgdef\ex{\ex S\ex\arga\ex}\ex{\ex\@nameauth@FirstNametrue%
              \ex\NameauthFName\ex{\the\tokc}}%
%    \end{macrocode}
% \clearpage\noindent
%    \begin{macrocode}
          \else
            \ex\ex\ex\csgdef\ex\ex\ex{\ex\ex\ex\arga\ex\ex\ex}%
              \ex\ex\ex{\ex\ex\ex\NameauthName\ex\ex\ex[\ex\the\ex\tokb\ex]%
              \ex{\the\tokc}}%
            \ex\ex\ex\csgdef\ex\ex\ex{\ex\ex\ex L\ex\ex\ex\arga%
              \ex\ex\ex}\ex\ex\ex{\ex\ex\ex\@nameauth@FullNametrue%
              \ex\ex\ex\NameauthLName\ex\ex\ex[\ex\the\ex\tokb\ex]\ex{\the\tokc}}%
            \ex\ex\ex\csgdef\ex\ex\ex{\ex\ex\ex S\ex\ex\ex\arga%
              \ex\ex\ex}\ex\ex\ex{\ex\ex\ex\@nameauth@FirstNametrue%
              \ex\ex\ex\NameauthFName\ex\ex\ex[%
              \ex\the\ex\tokb\ex]\ex{\the\tokc}}%
          \fi
        \else
          \ifx\testb\@empty
            \ex\ex\ex\csgdef\ex\ex\ex{\ex\ex\ex\arga\ex\ex\ex}%
              \ex\ex\ex{\ex\ex\ex\NameauthName\ex\ex\ex{\ex\the\ex\tokc\ex}%
              \ex[\the\tokd]}%
            \ex\ex\ex\csgdef\ex\ex\ex{\ex\ex\ex L\ex\ex\ex\arga%
              \ex\ex\ex}\ex\ex\ex{\ex\ex\ex\@nameauth@FullNametrue%
              \ex\ex\ex\NameauthLName\ex\ex\ex{%
              \ex\the\ex\tokc\ex}\ex[\the\tokd]}%
            \ex\ex\ex\csgdef\ex\ex\ex{\ex\ex\ex S\ex\ex\ex\arga%
              \ex\ex\ex}\ex\ex\ex{\ex\ex\ex\@nameauth@FirstNametrue%
              \ex\ex\ex\NameauthFName\ex\ex\ex{%
              \ex\the\ex\tokc\ex}\ex[\the\tokd]}%
          \else
            \ex\ex\ex\ex\ex\ex\ex\csgdef\ex\ex\ex\ex\ex\ex\ex{%
              \ex\ex\ex\ex\ex\ex\ex\arga\ex\ex\ex\ex\ex\ex\ex}%
              \ex\ex\ex\ex\ex\ex\ex{\ex\ex\ex\ex\ex\ex\ex\NameauthName%
              \ex\ex\ex\ex\ex\ex\ex[\ex\ex\ex\the\ex\ex\ex\tokb%
              \ex\ex\ex]\ex\ex\ex{\ex\the\ex\tokc\ex}\ex[\the\tokd]}%
            \ex\ex\ex\ex\ex\ex\ex\csgdef\ex\ex\ex\ex\ex\ex\ex{%
              \ex\ex\ex\ex\ex\ex\ex L\ex\ex\ex\ex\ex\ex\ex\arga%
              \ex\ex\ex\ex\ex\ex\ex}\ex\ex\ex\ex\ex\ex\ex{%
              \ex\ex\ex\ex\ex\ex\ex\@nameauth@FullNametrue%
              \ex\ex\ex\ex\ex\ex\ex\NameauthLName%
              \ex\ex\ex\ex\ex\ex\ex[\ex\ex\ex\the\ex\ex\ex\tokb%
              \ex\ex\ex]\ex\ex\ex{\ex\the\ex\tokc\ex}\ex[\the\tokd]}%
            \ex\ex\ex\ex\ex\ex\ex\csgdef\ex\ex\ex\ex\ex\ex\ex{%
              \ex\ex\ex\ex\ex\ex\ex S\ex\ex\ex\ex\ex\ex\ex\arga%
              \ex\ex\ex\ex\ex\ex\ex}\ex\ex\ex\ex\ex\ex\ex{%
              \ex\ex\ex\ex\ex\ex\ex\@nameauth@FirstNametrue%
              \ex\ex\ex\ex\ex\ex\ex\NameauthFName\ex\ex\ex\ex\ex\ex\ex[%
              \ex\ex\ex\the\ex\ex\ex\tokb\ex\ex\ex]%
              \ex\ex\ex{\ex\the\ex\tokc\ex}\ex[\the\tokd]}%
          \fi
        \fi
      \fi
    \fi
    \ignorespaces%
  }\ignorespaces%
}{\endgroup\ignorespaces}
%    \end{macrocode}
% \end{environment}
%\Finale
\endinput
%</package>
