% \iffalse meta-comment %<*internal> \iffalse % %<*readme> multicolrule - Decorative rules between columns ================================================= The multicolrule package lets you customize the appearance of the vertical rule that appears between columns of multicolumn text. It is primarily intended to work with the multicol package, hence its name, but it also supports the twocolumn option and \twocolumn macro provided by the standard classes (and related classes such as the KOMA-Script equivalents). Installation ------------ This package is provided as a .dtx file. To install it and compile the documentation at the same time, simply process the .dtx file with LaTeX (for example, `pdflatex multicolrule.dtx`). To extract the package only, process the file with TeX (`tex multicolrule.dtx`). Note that the documentation uses the l3doc class to index the code, and so to get the index, you must issue: `makeindex -s gind.ist -o multicolrule.ind multicolrule.idx` and to get the change list, you must issue `makeindex -s gglo.ist -o multicolrule.gls multicolrule.glo`. This package requires expl3 and xparse. % %<*internal> \fi \def\nameofplainTeX{plain} \ifx\fmtname\nameofplainTeX\else \expandafter\begingroup \fi % %<*install> \input l3docstrip.tex \keepsilent \askforoverwritefalse \preamble ---------------------------------------------------------------- multicolrule --- Decorative rules between columns Author: Karl Hagen Email: latex@polysyllabic.com Released under the LaTeX Project Public License v1.3c or later See http://www.latex-project.org/lppl.txt ---------------------------------------------------------------- \endpreamble \postamble Copyright (C) 2018-2019 by Karl Hagen This file may be distributed and/or modified under the conditions of the LaTeX Project Public License (LPPL), either version 1.3c of this license or (at your option) any later version. The latest version of this license is in the file: https://www.latex-project.org/lppl.txt This work is "maintained" (as per LPPL maintenance status) by Karl Hagen. This work consists of the files multicolrule.dtx and mcrule-examples.tex, and the derived files multicolrule.ins, multicolrule.sty, multicolrule.pdf, and mcrule-examples.pdf. \endpostamble \usedir{tex/latex/multicolrule} \generate{ \file{\jobname.sty}{\from{\jobname.dtx}{package}} } % %\endbatchfile %<*internal> \usedir{source/latex/multicolrule} \generate{ \file{\jobname.ins}{\from{\jobname.dtx}{install}} } \nopreamble\nopostamble \usedir{doc/latex/multicolrule} \generate{ \file{README.md}{\from{\jobname.dtx}{readme}} } \ifx\fmtname\nameofplainTeX \expandafter\endbatchfile \else \expandafter\endgroup \fi % %<*driver|package> \RequirePackage{expl3} \RequirePackage{xparse} % %<*driver> \PassOptionsToPackage{svgnames}{xcolor} \documentclass{l3doc} \usepackage[T1]{fontenc} \usepackage[ttscale=0.85]{libertine} \usepackage{microtype} \usepackage[tikz]{multicolrule} \usepackage{longtable} \usepackage{ragged2e} \usepackage{scrlayer-scrpage} \usepackage{scrlayer-notecolumn} \usepackage{bbding} \usepackage{pgfornament} \pagestyle{scrheadings} \automark[subsection]{section} \DeclareNewNoteColumn[ reversemarginpar, font=\color{Navy}\footnotesize\ttfamily ]{illustration} \ProvideDocumentCommand\opt{m}{\texttt{#1}} \NewDocumentCommand{\stydsc}{m}{^^A \makenote*[illustration]{^^A \hspace*{32pt}\parbox{\marginparwidth-32pt}{^^A \RaggedRight#1}^^A }^^A } \NewDocumentCommand{\mcrule}{}{\textcolor{Maroon}{multicolrule}} \NewDocumentCommand{\kvdesc}{m}{\textcolor{Navy}{\texttt{#1}}} \setlength{\parindent}{16pt} \setlength{\columnsep}{24pt} \SetMCRule{width=thin,color=Maroon,line-style=dots} \EnableCrossrefs \CodelineIndex \RecordChanges \begin{document} \DocInput{\jobname.dtx} \end{document} % % \fi % %\GetFileInfo{\jobname.sty} % %\DoNotIndex{\AfterPackage,\begin,\bool_gset_true:N,\bool_if:NTF, % \bool_lazy_and:nnT,\cs_gset_eq:NN,\bool_if_p:n,\bool_lazy_and:nnTF, % \bool_not_p:n,\bool_new:N,\box_ht:N,\box_dp:N,\box_move_down:nn, % \cs_generate_variant:Nn,\cs_gset:Npn,\cs_new:Npn, % \cs_new_nopar:Npn,\cs_set:Npn, % \c_one_int,\c_zero_dim,\c_zero_int, % \dim_compare_p:nNn,\dim_new:N,\dim_set:Nn, % \dim_compare:nNnTF,\dim_eval:n,\dimen, % \end,\ExplSyntaxOff,\ExplSyntaxOn,\fill,\hbox:n,\hspace,\ht, % \int_compare_nNnTF,\int_compare_p:nNn, % \int_gdecr:N,\int_gincr:N,\int_gset:Nn,\int_gzero:N, % \int_new:N,\int_set:Nn,\kern,\keys_define:nn, % \keys_set:nn,\keys_set_finter:nnn, % \msg_error:nnn,\msg_info:nnn,\msg_new:nnn,\msg_new:nnnn,\msg_warning:nn, % \NewDocumentCommand,\node,\prg_replicate:nn,\ProcessKeysOptions, % \prop_get:NnNTF,\prop_gput:Nnn,\prop_item:Nn,\prop_new:N, % \ProvidesExplPackage,\RequirePackage,\rule,\normalcolor, % \seq_count:N,\seq_item:Nn,\seq_new:N,\seq_set_split:Nnn, % \tl_if_blank:VF,\tl_if_empty:NT,\tl_if_empty:NTF,\tl_new:N,\tl_set:Nn, % \tl_set:Nx,\tw@,\vbox:n,\vbox_to_ht:nn,\vfill,\vrule,\l_tmpa_tl, % \cs_new_protected:Npn,\@ifpackageloaded,\@width,\xpatchcmd} % %\title{^^A % \textsf{multicolrule} --- Decorative rules between columns\thanks{^^A % This file describes version \fileversion, last revised \filedate.^^A % }^^A %} %\author{^^A % Karl Hagen\thanks{\href{mailto://latex@polysyllabic.com}^^A % {latex@polysyllabic.com}}} %\date{Released \filedate} % %\maketitle % % \changes{v1.0}{2018/12/15}{Initial public release} % \changes{v1.1}{2018/12/21}{Support bidi} % \changes{v1.1}{2018/12/21}{Allow extended rules} % \changes{v1.2}{2019/1/1}{Define rule patterns} % \changes{v1.2}{2019/1/1}{Allow per-column rule changes} % %\begin{abstract} % The \mcrule{} package lets you customize the appearance of the vertical rule % that appears between columns of multicolumn text. It is primarily intended to % work with the \pkg{multicol} package, hence its name, but it also supports % the twocolumn option and \cs{twocolumn} macro provided by the standard % classes (and related classes such as the KOMA-Script equivalents), as well as % the \pkg{bidi} package (and through it, all RTL scripts loaded with % \pkg{polyglossia}). %\end{abstract} % %\tableofcontents % %\begin{documentation} % \raggedcolumns % % \begin{multicols}{2}[\section{Introduction}] % \SetMCRule{line-style=dashed} % % In\stydsc{line-style=dashed} \LaTeX, there are two lengths that control the % formatting between columns of multicolumn text: \cs{columnsep} specifies the % space between adjacent columns, and \cs{columnseprule} specifies the width of % a solid vertical rule that is placed centered between the columns. The % \pkg{multicol} package adds the ability to change the color of the rule, but % in both vanilla \LaTeX{} and \pkg{multicol}, the rule itself is drawn % directly inside the routines that output the column boxes, and is therefore % difficult for users to alter. % % Of course it's a legitimate question why anyone should \emph{want} to change % this rule, or indeed use one at all, as good typography tends to avoid using % large vertical lines.\footnote{See, for example, the remarks in the % documentation for the \pkg{booktabs} package} In my own case, I needed to % modify the rule because of the requirements of a particular style I was % imitating, and having done the hard work of creating the necessary % infrastructure for one line style, it was simple to extend the solution to a % more general case. I hope someone else will find the options here useful. % % The basic line styles that \mcrule{} makes available are illustrated % throughout this guide. The default line-width used is 0.4pt (thin), and the % default color is \texttt{Maroon}. You can also find examples of rules created % with all available options in the file \file{mcrule-example.pdf}. % \end{multicols} % % \begin{multicols}{2} % \SetMCRule{custom-line={\path (TOP) to [ornament=85] (BOT);},extend-top=-24pt, % extend-bot=-8pt} % \subsection*{New for Version 1.2} % Version\stydsc{custom-line=\\\{\textbackslash path (TOP) to [ornament=85] % (BOT);\}, extend-top=-24pt, extend-bot=-8pt} 1.2 adds the ability to define % patterns, which are aliases for a series of \cs{SetMCRule} settings. With % patterns, you can change individual separators on the same page. For example, % in three-column text, the left separator can differ from the right. % You can also alter the appearance of one or more separators anywhere within % the environment (see section \ref{sec:patterns}). % % \subsection*{New for Version 1.1} % Version 1.1 supports drawing decorative rules if you have the \pkg{bidi} % package loaded, which can occur automatically if you set a right-to-left % language with \pkg{polyglossia}. It also provides a mechanism to extend or % shrink rules beyond the natural height of the columns, as well as to have the % rule fill the available space to the end of the text area (see section % \ref{sec:extend}). % \end{multicols} % % \begin{multicols}{2}[\subsection{Bugs and Known Limitations}] % The\stydsc{line-style=dots} \mcrule{} package is written using expl3 syntax, % and so requires a less-than-ancient installation of \LaTeX. It requires the % packages \pkg{l3keys2e}, \pkg{xparse}, \pkg{xpatch}, \pkg{xcolor}, % \pkg{scrlfile}, and depending on the mode of operation may also require % \pkg{multicol} and \pkg{tikz}. If you have an up-to-date distribution, these % requirements should cause no issues. % % I am sure that there are bugs that remain to be uncovered, inefficient methods % that could stand improvement, and useful features that still need to be % implemented. The development code is maintained on % \href{https://github.com/polysyllabic/multicolrule}{github}, and you can file % feature requests or bug reports there. Alternatively, you can send an email % to \href{mailto://latex@polysyllabic.com}{latex@polysyllabic.com}. I welcome % contributions for additional styles, especially to provide more options when % running the package without \pkg{tikz}. % % The following are the issues I'm currently aware of that aren't \mcrule{} % errors but which may cause buggy looking behavior: % % This package works by patching the output routines of either \pkg{multicol} % or the \LaTeX{} kernel, depending on the mode of operation. If \pkg{bidi} is % loaded, it will also patch that. It will have no effect if you use a class or % package that outputs column text via alternate mechanisms. This includes % \pkg{parcolumns}, and probably other classes and packages designed to typeset % parallel-column text as well, although I have not done a survey to determine % whether this is the case. If you would like support for one of these, please % send me an email or file a feature request on github and I'll see what I can % do. % % The line styles that work by repeating elements in a tiled pattern may have % significant gaps at the end of columns, particularly for larger patterns. % You can mitigate this problem slightly by tweaking the spaces above and % below a pattern, but the basic problem is a side-effect of the way these % patterns are implemented (with \cs{cleaders}), which means that only an % integer number of copies can be produced. Lines drawn with \pkg{tikz} do not % have this problem. % % Extending rules beyond their natural column lengths can seriously mess up % the output, including, in certain edge cases, causing \pkg{multicol} to % overprint columns or even put them in the margins. The fact that the extended % rule occupies space on the page instead of extending up into the margin was a % deliberate design decision and is necessary to support the % \kvdesc{extend-fill} and \kvdesc{extend-reserve} options work correctly. A % future version may support drawing the rules to a background layer so that % the text is not shifted. % \end{multicols} % % \begin{multicols}{2}[\subsection{License}] % \SetMCRule{width=ultra-thick,line-style=dotted} % The\stydsc{\texttt{line-style=dotted, width=ultra-thick}} \mcrule{} % package is copyright 2018--2019 by Karl Hagen. It may be distributed and/or % modified under the conditions of the \LaTeX{} Project Public License, either % version 1.3c of this license or (at your option) any later version. The % latest version of this license is in % % \medskip % \noindent{\footnotesize\url{http://www.latex-project.org/lppl.txt}.} % \medskip % % This work has the LPPL maintenance status `maintained.' The Current % Maintainer of this work is Karl Hagen. % \end{multicols} % %\begin{multicols}{2}[\section{Package Options}] % \SetMCRule{line-style=dash-dot} % % \subsection{Default Operation} % Loading\stydsc{line-style=dash-dot} \mcrule{} with its default settings % enables \pkg{multicol} support, and that package will be loaded if it % hasn't been already. Note that if you need to pass any parameters to % \pkg{multicol}, such as |docolaction|, you should load \pkg{multicol} with % the appropriate settings \emph{before} you load \mcrule, as \LaTeX{} does not % support reloading packages with different parameters. % % \subsection{Option `tikz'} % \DescribeOption{tikz} % You can use more line styles if you also use the \pkg{tikz} % package. Some line styles are only available if \pkg{tikz} is enabled, and % others look better with it. The default behavior of \mcrule{} depends on the % status of the \pkg{tikz} package at the time \mcrule{} is loaded. If % \mcrule{} detects that \pkg{tikz} is already loaded, then tikz support will % be enabled by default. Otherwise, you need the \opt{tikz} to enable it. This % option also accepts explicit boolean values, so you can pass |tikz=false| if % you want to explicitly disable tikz support. If tikz support is not enabled % (or if it is explicitly disabled), the line styles marked \emph{tikz only} % in section \ref{sec:linestyles} will be unavailable and errors will result % if you try to use them. % % \subsection{Option `twocolumn'} % \DescribeOption{twocolumn} % The \mcrule{} package recognizes the option \opt{twocolumn}, % either as a package option or as a global class option. If you pass this option % to your document class, you do not need to pass it a second time to the % package. It is only necessary to use the package option if you plan to have a % predominantly one-column document and use \cs{twocolumn} to switch % temporarily into two-column mode. % % Because \pkg{multicol} does not work well with the ordinary two-column % mode, \mcrule{} is only designed to work with one or the other at a time. If % you try to use the \opt{twocolumn} option when \pkg{multicol} has already % been loaded, you will receive a warning and nothing is guaranteed. But the % custom rules will at best only appear in the conventional two-column mode and % not within a \env{multicols} environment. % \end{multicols} % % \section{The User Interface} % |\SetMCRule| \marg{key-value list} % % \begin{multicols}{2} % \SetMCRule{width=2pt,line-style=circles} % \noindent \DescribeMacro{\SetMCRule} % The\stydsc{line-style=circles,\\ width=2pt} main user command for \mcrule{} is % \cs{SetMCRule}. It takes one parameter containing a key-value list of all % options you want to set. You can issue this command in the preamble or the % document body. Changes to the rule settings are local to the current group. % For example, if you call \cs{SetMCRule} inside a \env{multicols} environment, % the rule settings will revert to their previous values once the environment % ends. Also note that any changes made with \cs{SetMCRule} when multiple % columns are active will appear starting on the same page as your current % location when you issue the command, and will extend the height of the full % column box. It is not possible to have a rule change styles in the middle of % a page unless you close out one \env{multicols} environment and begin another. % % Table \ref{table:mcrulekeys} summarizes the keys available in \cs{SetMCRule}. % The functions of each is described in detail in the sections that follow. % \end{multicols} % % \begin{longtable}{lp{3.5in}} % \caption{\cs{SetMCRule} keys\label{table:mcrulekeys}} \\ % \toprule % Key & Purpose\\ % \midrule % \endfirsthead % \caption{\textbackslash SetMCRule keys (cont.)} \\ % \toprule % Key & Purpose\\ % \midrule % \endhead % \kvdesc{color} & Set the color of the rule (see sec. \ref{sec:color})\\ % \kvdesc{color-model} & Set the color model of the rule (see sec. % \ref{sec:color})\\ % \kvdesc{custom-line} & Set a custom \pkg{tikz} line for the rule % (\emph{tikz only}; see sec. \ref{sec:custom})\\ % \kvdesc{custom-pattern} & Set a custom individual pattern for the rule (see % sec. \ref{sec:custom})\\ % \kvdesc{custom-tile} & Set a custom tiling pattern for the rule % (see sec. \ref{sec:custom})\\ % \kvdesc{double} & Draw two copies of the rule (see sec. % \ref{sec:repeats})\\ % \kvdesc{extend-bot} & Set an extra amount to extend the rule at the bottom of % the column (see sec. \ref{sec:extend})\\ % \kvdesc{extend-fill} & Extend rule to the bottom of the text area % (\emph{multicol} only; see sec. \ref{sec:extend})\\ % \kvdesc{extend-reserve} & Space to reserve at bottom of text area when using % \kvdesc{extend-fill} (\emph{multicol} only; see sec, \ref{sec:extend})\\ % \kvdesc{extend-top} & Set an extra amount to extend the rule at the top of % the column (see sec. \ref{sec:extend})\\ % \kvdesc{line-style} & Select the type of rule printed % (default=\emph{default}; see sec. \ref{sec:linestyles})\\ % \kvdesc{pattern-after} & Number of separators to delay before beginning to % use the specified patterns (default=0; see sec. \ref{sec:patterns})\\ % \kvdesc{pattern-for} & Number times separators to apply the patterns to % before returning to default (default=$-1$; see sec. \ref{sec:patterns})\\ % \kvdesc{patterns} & Specify one or more patterns use to draw rules. % (default=\emph{none}; see sec. \ref{sec:patterns})\\ % \kvdesc{single} & Draw a single copy of the rule (\emph{default}; % see sec. \ref{sec:repeats})\\ % \kvdesc{repeat} & Set the number of times to draw the rule (see % sec. \ref{sec:repeats})\\ % \kvdesc{repeat-distance} & Set the horizontal space between % adjacent copies of repeated rules (see sec. \ref{sec:repeats})\\ % \kvdesc{triple} & Draw three copies of the rule (see sec. % \ref{sec:repeats})\\ % \kvdesc{width} & Set the width of the rule (see sec. % \ref{sec:width})\\ % \bottomrule % \end{longtable} % % \begin{multicols}{2}[\subsection{Styles with the `line-style' option}^^A % \label{sec:linestyles}] % \SetMCRule{width=4pt,line-style=solid-circles} % % You\stydsc{line-style=solid-circles, width=4pt} can choose a style for the % rule with the \kvdesc{line-style} key. If the predefined styles are % insufficient for your purpose, see section \ref{sec:custom} for different % ways to customize the rule in even more radical ways. The width of many line % styles scales directly with the setting of \cs{columnseprule}, the default % \LaTeX{} length that controls the width of the column rule, but even those % that do not, the width must be non-zero for the rule to display (see section % \ref{sec:width}). % % Table \ref{table:linestyles} summarizes the available line styles. Most of % the basic patterns come in three versions, differing only in how closely the % pattern is spaced: normal, dense, and loose. These settings parallel those % found in \pkg{tikz} and use the same spacing between elements. There are no % named settings for double lines and the like because you control that feature % separately, with the \kvdesc{repeat} key. All line styles can be repeated as % many times as you like (see section \ref{sec:repeats}). % \end{multicols} % % \begin{longtable}{lp{3in}} % \caption{Styles available for the line-style key\label{table:linestyles}}\\ % \toprule % Style & Description\\ % \midrule % \endfirsthead % \caption{Available line-style settings (cont.)} \\ % \toprule % Style & Description\\ % \midrule % \endhead % \kvdesc{circles} & A series of hollow circles (\emph{tikz % only})\\ % \kvdesc{dash-dot} & A dash followed by a square dot (\emph{tikz % only})\\ % \kvdesc{dash-dot-dot} & A dash followed by two square dots % (\emph{tikz only})\\ % \kvdesc{dashed} & A series of dashed lines\\ % \kvdesc{default} & A solid rule drawn the same way as the default % \pkg{multicol} rule. Does not support extended rules.\\ % \kvdesc{dense-circles} & The same as \kvdesc{circles} % but more closely spaced (\emph{tikz only})\\ % \kvdesc{dense-dots} & The same as \kvdesc{dots} but % more closely spaced\\ % \kvdesc{dense-solid-circles} & The same as \kvdesc{solid-circles} but more % closely spaced (\emph{tikz only})\\ % \kvdesc{densely-dash-dot} & The same as \kvdesc{dash-dot} but more closely % spaced (\emph{tikz only})\\ % \kvdesc{densely-dash-dot-dot} & The same as \kvdesc{dash-dot-dot} but more % closely spaced (\emph{tikz only})\\ % \kvdesc{densely-dashed} & The same as \kvdesc{dashed} but more closely % spaced\\ % \kvdesc{densely-dotted} & The same as \kvdesc{dotted} but more closely % spaced\\ % \kvdesc{dots} & A series of dots drawn with the period (full-stop) of the % current font\\ % \kvdesc{dotted} & A series of square dots\\ % \kvdesc{loose-dots} & The same as \kvdesc{dots} but spaced further apart\\ % \kvdesc{loose-circles} & The same as \kvdesc{circles} but spaced further % apart (\emph{tikz only})\\ % \kvdesc{loose-solid-circles} & The same as \kvdesc{solid-circles} but % spaced further apart (\emph{tikz only})\\ % \kvdesc{loosely-dash-dot} & The same as \kvdesc{dash-dot} but spaced % further apart (\emph{tikz only})\\ % \kvdesc{loosely-dash-dot-dot} & The same as \kvdesc{dash-dot-dot} but % spaced further apart (\emph{tikz only})\\ % \kvdesc{loosely-dashed} & The same as \kvdesc{dashed} but spaced further % apart\\ % \kvdesc{loosely-dotted} & The same as \kvdesc{dotted} but spaced further % apart\\ % \kvdesc{solid} & A solid line, like \kvdesc{default}, but supports extending % rules\\ % \kvdesc{solid-circles} & A series of filled circles (\emph{tikz only})\\ % \bottomrule % \end{longtable} % % \begin{multicols}{2} % \SetMCRule{width=thin,line-style=solid} % The\stydsc{line-style=solid} \kvdesc{default} and \kvdesc{solid} line styles % are nearly the same, except that the \kvdesc{solid} line (as of version 1.1) % supports the rule-extension commands described in section \ref{sec:extend}. % This means that if you want a solid rule with altered top or bottom % extensions, you must explicitly set the line style to \kvdesc{solid}. If you % make no calls to \cs{SetMCRule} after loading \mcrule, the column divider % will continue to behave exactly as it does with the ordinary \pkg{multicol} % package. % % You can alter the rule's width and color either through \cs{SetMCRule} with % the \kvdesc{width} and \kvdesc{color} keys described in sections % \ref{sec:width} and \ref{sec:color}, respectively, or directly by changing % the value of \cs{columnseprule} and renewing the \cs{columnseprulecolor} % macro. % % The \kvdesc{dots} style and its variants are rendered with a period (.) in % the currently active font. This is one of the styles, mentioned above, that % do not change their size as the line width increases. The same is true of % custom tiles. % % The \kvdesc{dotted} styles differ from \kvdesc{dots} in that the former are % squares with side lengths equal to \cs{columnseprule}. This mirrors the % behavior of the equivalently named dotted patterns in \pkg{tikz}. % \end{multicols} % % \subsubsection{Custom Patterns}\label{sec:custom} % \noindent\texttt{custom-tile =} \marg{pattern} \marg{space above} % \marg{space below} % \begin{multicols}{2} % \SetMCRule{custom-tile={\SparkleBold}{16pt}{16pt}} % % There\stydsc{custom-tile= \{\textbackslash SparkleBold\} \{16pt\}\{16pt\}} % are three options to create custom rules with \mcrule. The first is the % \kvdesc{custom-tile} key. This creates a rule consisting of vertically % stacked boxes of arbitrary content---the tile---running the height of the % column separator. The \kvdesc{custom-tile} key takes three parameters, % which must all be enclosed brackets and may not be omitted. The first % should contain the tokens you want to appear as the content of the tile. % The second is a dimension specifying the leading vertical space to apply % above each copy of the tile. The third is a dimension specifying the % trailing vertical space to insert below each copy of the tile. % % The rule in this section uses the \cs{SparkleBold} symbol from % \pkg{bbding}. Notice that when you use the \kvdesc{custom-tile} parameter, % of any of the other custom key commands, you do \emph{not} specify a separate % \kvdesc{line-style}. If you try to provide both, the last style given in the % list will be the one that is kept. % \end{multicols} % % \begin{multicols}{2}[\noindent\texttt{custom-pattern =} \marg{pattern} \marg{shift % down} \marg{shift up}] % \SetMCRule{custom-pattern={\HandRight}{0pt}{0pt}} % % The\stydsc{custom-pattern= \{\textbackslash HandRight\} \{0pt\}\{0pt\}} % second custom option is with the \kvdesc{custom-pattern} key. The syntax % is identical to that for \kvdesc{custom-tile}, but the content you specify % will appear once per page or column pair (if the columns occupy less than a % full page). This content will be vertically centered if the second and third % parameters are both 0pt. You can shift the content down by increasing the % second parameter, and up by increasing the third. The rule in this section % uses the \cs{HandRight} symbol from \pkg{bbding}. % \end{multicols} % % \begin{multicols}{2}[\noindent\texttt{custom-line =} \marg{draw command}] % \SetMCRule{custom-line={\path (TOP) to [ornament=88] (BOT);}} % % The\stydsc{custom-line=\{\textbackslash path (TOP) to [ornament=88] % (BOT);\}} third custom % pattern involves setting your own \pkg{tikz} drawing % function using the key \kvdesc{custom-line}. The rule in this section is % drawn with an ornament from \pkg{pgfornaments}. Obviously, this feature % requires \pkg{tikz} support. The value you provide to the % \kvdesc{custom-line} key should consist of a \pkg{tikz} command, such as % \cs{draw} or \cs{path}, without the surrounding \env{tikzpicture} % environment. % % Before the drawing command is called, \mcrule{} will set up a % \env{tikzpicture} with both the x- and y-coordinates scaled to points, and % two nodes, named \texttt{(TOP)} and \texttt{(BOT)}, which are set to the % coordinates of the top and bottom of the rule. You can then specify your own % \cs{draw} or \cs{path} function in whatever way you like. The rule separating % these columns was drawn with a decorative element from the \pkg{pgfornaments} % package. % % This function will use the color set in % \cs{columnseprulecolor} if you don't set it explicitly within the tikz % command, but you must provide everything else necessary to draw the line % correctly, including the line width. Note that this function should be % considered experimental. It works for single-line commands such as the one % shown in the example, but I haven't tested it with anything more elaborate. % \end{multicols} % % \begin{multicols}{2}[\subsection{Colors}\label{sec:color}] % \SetMCRule{width=2pt,line-style=solid,color-model=cmy,color={0.7,0.5,0.3}} % You\stydsc{line-style=solid,\\width=2pt\\color-model=cmy,\\ % color=\{0.7,0.5,0.3\}} can set colors for the rule through the % \kvdesc{color} and, optionally, the \kvdesc{color-model} keys. \mcrule{} loads the % \pkg{xcolor} package to manage colors, and the \kvdesc{color} % parameter accepts any name that \pkg{xcolor} recognizes, either natively or % as the result of any names you have defined with \cs{definecolor} % (see the \pkg{xcolor} documentation). Note that if you want to use color names that % are defined through the one of \pkg{xcolor}'s package options, you must load % \pkg{xcolor} before both \mcrule{} and \pkg{tikz} with the relevant options. % % To specify a color by a numeric specification, you use the % \kvdesc{color-model} parameter to specify any color model that % \pkg{xcolor} recognizes (rgb, cmy, etc), and \kvdesc{color} to % hold the color-specification list. Because that list is itself comma-separated, % you must enclose it in brackets. % % The current color setting can always be found in % \cs{columnseprulecolor}. If you are running in twocolumn % mode without \pkg{multicol}, this command will be provided and colors will % work the same way they do with \pkg{multicol}. Note that setting the % \kvdesc{color} key causes \cs{columnseprulecolor} % to be redefined within the current group only. If you directly redefine % \cs{columnseprulecolor}, the color of the custom rule will % reflect this setting. This way, the settings of any packages that might alter % the rule color will be respected. %\end{multicols} % % \begin{multicols}{2}[\subsection{Width}\label{sec:width}] % \SetMCRule{width=thick,line-style=dash-dot-dot} % You\stydsc{line-style= dash-dot-dot,\\ width=thick} can set the width of the % rule with the \kvdesc{width} key. Legal values are any explicit dimension or % dimension expression, as well as with names that parallel those used by % \pkg{tikz}, except that spaces in the key names are replaced with hyphens. % % The current width of the rule is kept in \cs{columnseprule}, just as in % vanilla \LaTeX, and if it is set separately, the custom rule's width will % reflect this change. Note that although some line styles do not depend % directly on \cs{columnseprule} to calculate their actual width, the value % of \cs{columnseprule} must be greater than 0pt for any rule to appear. This % behavior is intentional and is in keeping with the way the default column % rules work. % \end{multicols} % % \begin{longtable}{ll} % \caption{Sizes of named line widths\label{table:linewidths}} \\ % \toprule % Name & Width\\ % \midrule % \endfirsthead % \caption{Sizes of named line widths (cont.)} \\ % \toprule % Name & Width\\ % \midrule % \endhead % \kvdesc{ultra-thin} & 0.1pt\\ % \kvdesc{very-thin} & 0.2pt\\ % \kvdesc{thin} & 0.4pt\\ % \kvdesc{semithick} & 0.6pt\\ % \kvdesc{thick} & 0.8pt\\ % \kvdesc{very-thick} & 1.2pt\\ % \kvdesc{ultra-thick} & 1.6pt\\ % \bottomrule % \end{longtable} % % \begin{multicols}{2}[\subsection{Repeated Rules}\label{sec:repeats}] % \SetMCRule{line-style=dash-dot-dot,triple=2pt} % % You can\stydsc{line-style= dash-dot-dot, triple=2pt} draw multiple, % adjacent copies of any rule by setting the number of times to draw the rule % with the \kvdesc{repeat} key. The space between copies is controlled with the % \kvdesc{repeat-distance} key. Initially, this distance is set to % \cs{columnseprule}. Note that you must enter an actual dimension expression % for this distance. The names used for line widths are not accepted. % % The keys \kvdesc{single}, \kvdesc{double}, and \kvdesc{triple} are shorthand % methods to set the number of repeats and the \kvdesc{repeat-distance} at the % same time. If you use the key without a value \kvdesc{repeat-distance} is set % to \cs{columnseprule}. % % There are no checks made to ensure that repeated rules will fit in the % available space between columns, so you should be careful using these % commands, especially with thicker rules. % \end{multicols} % %\begin{multicols}{2}[\subsection{Extended Rules}\label{sec:extend}] % \SetMCRule{line-style=dashed,extend-top=-16pt,extend-bot=-16pt} % % You\stydsc{line-style=dashed, extend-top=-16pt, extend-bot=-16pt} can specify % an additional amount by which the top or bottom of the rule projects beyond % the column's natural length with the keys \kvdesc{extend-top} and % \kvdesc{extend-bot}, each of which can be set to a dimension expression. % Extending the top of the rule with a positive dimension will push the columns % down from any preceding material. A positive value for \kvdesc{extend-bot} % does the same in the other direction when a column ends in the middle of a % page, but the rule will extend into the the bottom margin if the column goes % to the end of the page, and so you probably only want to use this in very % limited situations where you need a special effect for one column or a small % \env{multicol} environment. Overprinting and other bizarre effects can % result from extending the rule in the wrong place. Negative values for both % keys may be more generally useful, as they have the effect of shrinking the % rule. This behavior is illustrated with the rule for this section. % % The \kvdesc{extend-fill} key is a boolean option that, when set to true, will % extend the rule to occupy any space between the bottom of the columns and the % end of the text area. Providing the key with no value is equivalent to % |extend-fill=true|. This option has no effect unless the \pkg{multicol} % package is loaded. % % If you want text below the \env{multicols} environment when using % \kvdesc{extend-fill}, you can reserve space for it with % \kvdesc{extend-reserve}, which takes a dimension expression specifying the % vertical space to leave available after the rule. If the value is greater % than zero, the height of the extended line will be reduced by the reserved % amount plus the value of \cs{multicolsep}. In other words, you only have to % specify the actual space you need for the text itself, not the space that % \pkg{multicol} adds automatically below the columns. Note that if the amount % you request for reserved space is less than the amount actually available at % the end of the page, the rule will not extend below the columns and you % probably will find this material spilling onto the next page anyway. %\end{multicols} % %\subsection{Rule Patterns} % \begin{syntax} % |\DeclareMCRulePattern| \marg{name} \marg{key-value list} % \end{syntax} %\DeclareMCRulePattern{left-hand}{custom-tile={\HandLeft}{8pt}{8pt}} %\DeclareMCRulePattern{right-hand}{custom-tile={\HandRight}{8pt}{8pt}} %\begin{multicols}{3} % \noindent \DescribeMacro{\DeclareMCRulePattern} % \SetMCRule{patterns={right-hand,left-hand}} % A\stydsc{patterns=\{right-hand, left-hand\}\\ See the code sample below for % the definitions of the patterns} ``pattern'' refers to a bundle of settings used by \mcrule. You can declare % a pattern for a line style with the command \cs{DeclareMCRulePattern}. The % \meta{name} should consist of letters and hyphens only. The % \meta{key-value list} can contain all keys that are valid for \cs{SetMCRule} % with the exception of \kvdesc{patterns}. If you put something like % |patterns=foo| in the definition of a pattern, you won't get an error, but it % will be ignored. % % Once you have declared a pattern, you can use it as a value for the % \kvdesc{patterns} argument of \cs{SetMCRule}. This key can accept either a % single pattern or a comma-separated list of patterns. If you use a % comma-separated list, make sure you enclose it in braces. % % When a pattern is in effect, its settings are applied on top of whatever % the prior settings are. If you set the key to an empty list, any patterns % currently in effect will be canceled, and \mcrule{} will revert to the % previous settings. % % If the \kvdesc{patterns} key contains more than one pattern, \mcrule{} will % cycle through the list of patterns, using one pattern each time a rule is % drawn between columns. (Note, the patterns do not cycle within a single % column separator if you use the \kvdesc{repeat} key.) This cycle is global, % so if the number columns is not a multiple of the number of patterns and you % start a new \env{multicols} environment with the same patterns in effect, the % cycle will pick up where it left off. Every time you set new patternss, % however, the cycle begins anew. % %\end{multicols} % % The columns above were defined with the following: %\begin{verbatim} % \DeclareMCRulePattern{left-hand}{custom-tile={\HandLeft}{8pt}{8pt}} % \DeclareMCRulePattern{right-hand}{custom-tile={\HandRight}{8pt}{8pt}} % \begin{multicols}{3} % \SetMCRule{patterns={right-hand,left-hand}} % ... % \end{multicols} %\end{verbatim} % %\DeclareMCRulePattern{shrink-me}{line-style=solid,extend-top=-3\baselineskip} %\begin{multicols}{3} % \SetMCRule{line-style=solid,patterns=shrink-me,pattern-for=1} % If\stydsc{patterns=shrink-me, pattern-for=1\\ See the code sample below for % the definition of `shrink-me'} you want to alter the rule only for certain % column separators, you can use % the \kvdesc{pattern-after} and \kvdesc{pattern-for} keys, both of which % take integer values, in conjunction with \kvdesc{patterns}. % % The \kvdesc{pattern-for} key means ``use the given pattern or patterns for % this many column separators only.'' Afterwards, the pattern will be disabled, % meaning that it won't be applied any more and only the settings applied % directly will be in effect until it is reset. A negative value to this key % means that the patterns will be repeated indefinitely. The default is $-1$. % % The \kvdesc{pattern-after} key means ``wait until after this many column % separators before starting to apply the pattern. The default is 0. If you use % it in conjunction with \kvdesc{pattern-for}, the count of modified column % separators begins after the skipped columns. % % For example, suppose you have four-column text and want to alter the third % column separator on the first page of the environment only.\footnote{Remember % that you have one less column separator than you have columns.} You could % accomplish this task with the code above. % % Using predefined patterns adds processing overhead, since they must be % applied each time the rule is drawn. Therefore it is more efficient to avoid % patterns unless you need to actually change the line style from column to % column, although if you compile on a reasonably modern computer, you are % unlikely to notice too much delay. % % Note that any settings you provide in the same command where you apply a % \kvdesc{patterns} key do not alter definition of the pattern. If you do this, % you are altering the settings in effect before the pattern is applied. % %\end{multicols} % Shrinking the final two column separators in four-column text: %\begin{verbatim} % \DeclareMCRulePattern{shrink-me}{line-style=solid, % extend-top=-3\baselineskip} % \begin{multicols}{4} % \SetMCRule{patterns=shrink-me,pattern-after=1,pattern-for=2} % ... % \end{multicols} %\end{verbatim} % %\end{documentation} % %\begin{implementation} % %\section{Implementation} % % \begin{macrocode} %<*package> % \end{macrocode} % % \begin{macrocode} %<@@=mcrule> % \end{macrocode} % %\subsection{Preliminaries} % % \begin{macrocode} \ProvidesExplPackage {multicolrule} {2019/01/01} {1.2} {Decorative vertical rules between columns} % \end{macrocode} % % We always need these packages. % \begin{macrocode} \RequirePackage{l3keys2e} \RequirePackage{xpatch} \RequirePackage{xcolor} \RequirePackage{scrlfile} % \end{macrocode} % % Define the messages we use. % \begin{macrocode} \msg_new:nnn {multicolrule} {patch-success} {Patched~#1.} \msg_new:nnn {multicolrule} {patch-failure} {Error~patching~#1.} \msg_new:nnnn {multicolrule} {tikz-required} {Tikz~required} {The~'#1'~setting~requires~tikz~to~work.~Either~load~tikz~before~you~load~ multicolrule~or~use~multicolrule's~'tikz'~package~option.} \msg_new:nnnn {multicolrule} {multicol-loaded} {Multicol~loaded} {You~are~ using~the~'twocolumn'~option~with~multicol~already~loaded.~You~will~likely~ run~into~problems.} \msg_new:nnnn {multicolrule} {pattern-undefined} {Pattern~undefined} {The~multicolrule~pattern~'#1'~has~not~been~defined.} % \end{macrocode} % %\begin{variable}{\g_@@_twocolumn_bool,\g_@@_use_tikz_bool} % Flags for package options % \begin{macrocode} \bool_new:N \g_@@_twocolumn_bool \bool_new:N \g_@@_use_tikz_bool % \end{macrocode} %\end{variable} % %\begin{variable}{\l_@@_repeat_int,\l_@@_repeat_distance_dim} % Variables to support repeated copies of the rule. % \begin{macrocode} \int_new:N \l_@@_repeat_int \int_set:Nn \l_@@_repeat_int {1} \dim_new:N \l_@@_repeat_distance_dim % \end{macrocode} %\end{variable} % %\begin{variable}{\l_@@_extend_top_dim, % \l_@@_extend_bot_dim, % \l_@@_extend_fill_bool, % \l_@@_extend_reserve_dim} % Variables to control the distance to extend the rule above and below the % natural column height. % \begin{macrocode} \dim_new:N \l_@@_extend_top_dim \dim_new:N \l_@@_extend_bot_dim \bool_new:N \l_@@_extend_fill_bool \dim_new:N \l_@@_extend_reserve_dim % \end{macrocode} %\end{variable} % %\begin{variable}{\l_@@_color_name_tl,\l_@@_color_model_tl} % Keep name and color model so we can set them separately while retaining % the value of the other one. % \begin{macrocode} \tl_new:N \l_@@_color_name_tl \tl_new:N \l_@@_color_model_tl % \end{macrocode} %\end{variable} % %\begin{variable}{\g_@@_patterns_prop, \g_@@_pattern_count_int, % \g_@@_pattern_for_int, \g_@@_pattern_after_int, % \l_@@_pattern_list_seq} % Variables to support defined patterns. % \begin{macrocode} \prop_new:N \g_@@_patterns_prop \int_new:N \g_@@_pattern_count_int \int_new:N \g_@@_pattern_for_int \int_new:N \g_@@_pattern_after_int \seq_new:N \l_@@_pattern_list_seq % \end{macrocode} %\end{variable} % % If \pkg{tikz} is already loaded, enable \pkg{tikz}-sensitive line styles % unless the user explicitly disables them. If \pkg{tikz} is not already % loaded, these functions are disabled unless they are explicitly loaded. % % \begin{macrocode} \@ifpackageloaded{tikz} { \bool_gset_true:N \g_@@_use_tikz_bool }{} % \end{macrocode} % % Set up the keys for package options and process them. % % \begin{macrocode} \keys_define:nn {mcrule-opts} { twocolumn .bool_gset:N = \g_@@_twocolumn_bool, tikz .bool_gset:N = \g_@@_use_tikz_bool, tikz .default:n = true, } \ProcessKeysOptions{mcrule-opts} % \end{macrocode} % % \subsection{Patching Output Routines} % %\begin{function}{\@@_column_height:,\@@_column_depth:} % % Get the height and depth of the box appropriate to the supported mode. % % \begin{macrocode} \cs_new:Npn \@@_column_height: {} \cs_new:Npn \@@_column_depth: {} % \end{macrocode} %\end{function} % %\begin{function}{\@@_patch_mcol_output:N} % Now that we know what mode we're going to run in, we patch the output % routine(s) to substitute our custom rule for the vanilla one. Since % \pkg{multicol} doesn't fully support twocolumn mode, we patch one or the % other, but not both. As of version 1.2, we make \cs{columnseprulecolor} % part of \cs{mcruledivider} so that we can set the color as part of a % style pattern. % \changes{v1.2}{2019/1/1}{Move \cs{columnseprulecolor} inside % \cs{mcruledivider}} % \begin{macrocode} \cs_new_protected:Npn \@@_patch_mcol_output:N #1 { \xpatchcmd{#1} {\columnseprulecolor\vrule\@width\columnseprule} {\mcruledivider} {\msg_info:nnn {multicolrule} {patch-success} {#1}} {\msg_info:nnn {multicolrule} {patch-failure} {#1}} } % \end{macrocode} %\end{function} % %\begin{function}{\@@_patch_twocol_output:N} % The same idea as above, only for the vanilla twocolumn mode. % \changes{v1.2}{2019/1/1}{Move \cs{columnseprulecolor} inside % \cs{mcruledivider}} % \begin{macrocode} \cs_new_protected:Npn \@@_patch_twocol_output:N #1 { \xpatchcmd{#1} {\normalcolor\vrule\@width\columnseprule} {\mcruledivider} {\msg_info:nnn {multicolrule} {patch-success} {#1}} {\msg_info:nnn {multicolrule} {patch-failure} {#1}} } % \end{macrocode} %\end{function} % % \begin{macrocode} \bool_if:NTF \g_@@_twocolumn_bool { \@ifpackageloaded{multicol} {\msg_warning:nn {multicolrule} {multicol-loaded}}{} % \end{macrocode} % Provide the column-color macro from \pkg{multicol}. % \begin{macrocode} \cs_gset:Npn \columnseprulecolor {\normalcolor} \cs_gset:Npn \@@_column_height: {\box_ht:N \@outputbox} \cs_gset:Npn \@@_column_depth: {\box_dp:N \@outputbox} \@@_patch_twocol_output:N \@outputdblcol % \end{macrocode} % % Now patch the relevant code in |\@outputdblcol|, replacing the hard-coded % rule with a macro that we can overwrite. % % \begin{macrocode} \@@_patch_twocol_output:N \@outputdblcol % \end{macrocode} % % \pkg{bidi} has two output routines to patch, and it insists on being loaded % after \pkg{xcolor}, \pkg{tikz}, \emph{and} \pkg{multicol}, so it must always % be loaded after us. We use \cs{AfterPackage} from \pkg{scrlfile} to insert % the patch if \pkg{bidi} is loaded later on. % \begin{macrocode} \AfterPackage!{bidi} { \@@_patch_twocol_output:N \RTL@outputdblcol \@@_patch_twocol_output:N \LTR@outputdblcol } } % \end{macrocode} % % Now patch for \pkg{multicol}. % % \begin{macrocode} { \RequirePackage{multicol} \@@_patch_mcol_output:N \LR@column@boxes \@@_patch_mcol_output:N \RL@column@boxes % \end{macrocode} % % Although taking the height of \cmd{\mult@rightbox} is a reliable way % to get the column height, the same isn't true for the depth, so we % use |\dimen\tw@|, which \pkg{multicol} uses to hold the maximum % depth of all the columns, instead. % % \begin{macrocode} \cs_gset:Npn \@@_column_height: {\box_ht:N \mult@rightbox} \cs_gset:Npn \@@_column_depth: {\dimen\tw@} % \end{macrocode} % % We need to reissue \cs{LRmulticolcolumns} to update the actual code in % \cmd{\mc@align@columns}. % % \begin{macrocode} \LRmulticolcolumns % \end{macrocode} % % The \pkg{bidi} package supplies its own versions of most core % \pkg{multicol} functions, including the output boxes. Much of this is % unnecessary, as current versions of \pkg{multicol} support printing the % columns in right-to-left order, and the effect is to leave the original % \pkg{multicol} definitions loaded but unused. As a result, after these % changes, the \pkg{multicol} commands \cs{LRmulticolcolumns} and % \cs{RLmulticolcolumns} have no visible effect. But as \pkg{bidi} also % reworks the footnotes extensively, it's easier just to patch the equivalent % output routines rather than rewrite it properly. % % \begin{macrocode} \AfterPackage!{bidi} { \cs_gset_eq:NN \LTR@column@boxes \LR@column@boxes \cs_gset_eq:NN \RTL@column@boxes \RL@column@boxes % \end{macrocode} % % While we're at it, we also redefine \cs{LRmulticolcolumns} and % \cs{RLmulticolcolumns} so they work the way people expect them to. % % \begin{macrocode} \cs_gset_eq:NN \LRmulticolcolumns \LTRmulticolcolumns \cs_gset_eq:NN \RLmulticolcolumns \RTLmulticolcolumns } } % \end{macrocode} % % % \subsection{Creating the Rules} % Utility functions for different rule types % %\begin{macro}{\mcruledivider} % % This is the function directly called by the patched output routines. It % has a \LaTeX2 name so the user can redefine it if necessary. Its main % function is to call the internal function \cs{mcrule_divider:}, which contains % the actual rule-typesetting instructions, the number of times specified in % \cs{l_@@_repeat_int}. \pkg{multicol} puts the rule in a group % in order to keep the color contained, which means that any local changes % here will be lost at the end of the rule. For this reason, we must set the % pattern, if any, here in order to support having different line styles % between different columns. % % \changes{v1.2}{2019/1/1}{Add pattern support} % \begin{macrocode} \cs_new_protected:Npn \mcruledivider { % \end{macrocode} % If the |pattern-after| counter is set, wait that many iterations of the rule % before we apply the patterns. % \begin{macrocode} \int_compare:nNnTF {\g_@@_pattern_after_int} > {\c_zero_int} { \int_gdecr:N \g_@@_pattern_after_int } { % \end{macrocode} % Don't change if the pattern is empty or the |pattern-for| counter has % expired. The way the logic works here, negative values of |pattern-for| % result in an indefinite number of repeats. % \begin{macrocode} \bool_lazy_and:nnT {\int_compare_p:nNn {\seq_count:N \l_@@_pattern_list_seq} > {\c_zero_int}} {! \int_compare_p:nNn {\g_@@_pattern_for_int} = {\c_zero_int}} { \int_gincr:N \g_@@_pattern_count_int \int_compare:nNnT {\g_@@_pattern_count_int} > {\seq_count:N \l_@@_pattern_list_seq} { \int_gset:Nn \g_@@_pattern_count_int {\c_one_int} } \tl_set:Nx \l_tmpa_tl {\seq_item:Nn \l_@@_pattern_list_seq {\g_@@_pattern_count_int} } \tl_if_blank:VF \l_tmpa_tl { \@@_set_pattern:V \l_tmpa_tl } \int_compare:nNnT {\g_@@_pattern_for_int} > {\c_zero_int} { \int_gdecr:N \g_@@_pattern_for_int } } } % \end{macrocode} % Now that the pattern has been changed we can set the color. % \begin{macrocode} \columnseprulecolor % \end{macrocode} % We only call \cs{mcrule_divider:} if \cs{columnseprule} $>0$, so that all % line styles can be turned off by setting it to 0, just as is the case with % the vanilla rules. % \begin{macrocode} \bool_lazy_and:nnT {\dim_compare_p:nNn {\columnseprule} > {\c_zero_dim}} {\int_compare_p:nNn {\l_@@_repeat_int} > {\c_zero_int}} { \mcrule_divider: \prg_replicate:nn {\l_@@_repeat_int - \c_one_int} { \hspace{\l_@@_repeat_distance_dim} \mcrule_divider: } } } % \end{macrocode} %\end{macro} % %\begin{function}{\@@_column_total_height:,\@@_column_total_depth:} % Get column height and depth with any explicit alterations. % \begin{macrocode} \cs_new:Npn \@@_column_total_height: { \dim_eval:n {\@@_column_height: + \@@_column_depth: + \@@_extend_column_top: + \@@_extend_column_bottom:} } \cs_new:Npn \@@_column_total_depth: { \dim_eval:n {\@@_column_depth: + \@@_extend_column_bottom:} } % \end{macrocode} %\end{function} % %\begin{function}{\@@_extend_column_top:} % Currently, the extend amount for the top is just the % |\l_@@_extend_top_dim| distance. In the future we may allow more complex % criteria, such as by odd or even page, or on a particular page. Although % these might theoretically be useful, I'm not going to implement them until % someone comes along with a use-case for it. % \begin{macrocode} \cs_new:Npn \@@_extend_column_top: { \l_@@_extend_top_dim } % \end{macrocode} %\end{function} % %\begin{function}{\@@_extend_column_bottom:} % The |extend-fill| option, which is only applicable with \pkg{multicol}, % extends the rule from the bottom of the column to the end of the text area, % minus whatever reserved space the user specifies. If there's less space % available than requested, we give everything we can. % \begin{macrocode} \cs_new:Npn \@@_extend_column_bottom: { \bool_lazy_and:nnTF {\bool_if_p:n {\l_@@_extend_fill_bool}} {\bool_not_p:n {\g_@@_twocolumn_bool}} { \dim_compare:nNnTF {\@colroom - \@@_column_height: - \@@_extend_reserve:} > {\c_zero_dim} {\@colroom - \@@_column_height: - \@@_extend_reserve:} {\c_zero_dim} } {\l_@@_extend_bot_dim} } % \end{macrocode} %\end{function} % %\begin{function}{\@@_extend_reserve:} % The reserved space is the amount of user-provided space we want, but we also % have to account for the space added with \cs{multicolsep}. % \begin{macrocode} \cs_new:Npn \@@_extend_reserve: { \dim_compare:nNnTF {\l_@@_extend_reserve_dim} > {\c_zero_dim} {\dim_eval:n {\l_@@_extend_reserve_dim + \multicolsep}} {\c_zero_dim} } % \end{macrocode} %\end{function} % %\begin{function}{\mcrule_divider:} % This is the routine that contains the instructions to draw one copy % of rule between columns. The default is identical to the original definition % used by \pkg{multicol}. It will be reset each time the user calls % \cs{MCSetRule} to specify a new line style. % \begin{macrocode} \cs_new:Npn \mcrule_divider: {\vrule\@width\columnseprule} % \end{macrocode} %\end{function} % %\begin{function}{\@@_pattern:nnn} % \begin{syntax} % |\__mcrule_pattern:nnn| \Arg{pattern} \Arg{space above} \Arg{space below} % \end{syntax} % Typesets a single copy of a pattern, vertically centered, in a vertical % box that is the height of the current column. The pattern must be % something that can go in a horizontal box. The spaces above and below % must be fixed dimensions. % \begin{macrocode} \cs_new_nopar:Npn \@@_pattern:nnn #1#2#3 { \box_move_down:nn {\@@_column_total_depth:} { \vbox_to_ht:nn {\@@_column_total_height:} { \tex_vfill:D \tex_kern:D #2 \hbox:n{#1} \tex_kern:D #3 \tex_vfill:D } } } % \end{macrocode} %\end{function} % %\begin{function}{\@@_tile_pattern:nnn} % \begin{syntax} % |\__mcrule_tile_pattern:nnn| \Arg{pattern} \Arg{space above} \Arg{space below} % \end{syntax} % Typesets multiple copies of pattern, tiled so as to occupy a vertical box % that is the height of the current column. The pattern must be something % that can go in a horizontal box. The spaces above and below must be fixed % dimensions. % \begin{macrocode} \cs_new_nopar:Npn \@@_tile_pattern:nnn #1#2#3 { \box_move_down:nn {\@@_column_total_depth:} { \vbox_to_ht:nn {\@@_column_total_height:} { \tex_cleaders:D \vbox:n { \tex_kern:D #2 \hbox:n{#1} \tex_kern:D #3 } \tex_vfill:D } } } % \end{macrocode} %\end{function} % %\begin{function}{\@@_line_pattern:nnnn} % \begin{syntax} % |\__mcrule_line_pattern:nnnn| \Arg{tikz-name} \Arg{height} \Arg{space above} % \Arg{space below} % \end{syntax} % This function can draw a line pattern using either a \pkg{tikz} name or % directly (as a tiled pattern). The latter case is currently limited to line % patterns that can be described in terms of a solid line of length % \meta{height} separated by spaces above and/or below the line. % \begin{macrocode} \cs_new:Npn \@@_line_pattern:nnnn #1#2#3#4 { \bool_if:NTF \g_@@_use_tikz_bool { \@@_pattern_line:n {#1} } { \@@_tile_pattern:nnn {\rule{\columnseprule}{#2}}{#3}{#4} } } % \end{macrocode} %\end{function} % %\begin{function}{\@@_solid_line:} % Unlike the default solid line, which is created with a simple \tn{vrule}, % this version allows us to extend the line beyond the natural space of the % column. % \begin{macrocode} \cs_new:Npn \@@_solid_line: { \rule[-\@@_column_total_depth:]{\columnseprule}{\@@_column_total_height:} } % \end{macrocode} %\end{function} % % \subsubsection{Tikz-only Routines} % % If we're supporting \pkg{tikz}, make sure it's loaded and redefine the % relevant functions. We turn off |expl3| syntax to load the package because % \pkg{tikz} relies on 2e catcodes, especially for spaces. % % \begin{macrocode} \bool_if:NTF \g_@@_use_tikz_bool { \ExplSyntaxOff \RequirePackage{tikz} \ExplSyntaxOn % \end{macrocode} % %\begin{function}{\@@_tikz_picture:n} % \begin{syntax} % |\__mcrule_tikz_picture:n| \Arg{draw function} % \end{syntax} % Set up the \env{tikzpicture} environment and declare two nodes, named |(TOP)| % and |(BOT)|. This way we can pass a \cs{draw} routine directly, % without worrying about the line's coordinates. % % \begin{macrocode} \cs_set:Npn \@@_tikz_picture:n #1 { \begin{tikzpicture}[x=1pt,y=1pt,inner~sep=0pt,outer~sep=0pt, baseline={([yshift=\@@_column_total_depth:]current~bounding~box.south)}] \node (TOP) at (0,\@@_column_total_height:) {}; \node (BOT) at (0,0) {}; #1 \end{tikzpicture} } % \end{macrocode} %\end{function} % %\begin{function}{\@@_pattern_line:n} % \begin{syntax} % |\__mcrule_pattern_line:n| \Arg{tikz pattern} % \end{syntax} % For the \pkg{tikz} versions of the predefined lines, we just draw % a line the length of the column box. \meta{tikz pattern} should % contain the name of a line style that \pkg{tikz} recognizes. % \begin{macrocode} \cs_set:Npn \@@_pattern_line:n #1 { \begin{tikzpicture}[x=1pt,y=1pt,inner~sep=0pt,outer~sep=0pt, baseline={([yshift=\@@_column_total_depth:]current~bounding~box.south)}] \draw[line~width=\columnseprule,#1] (0,\@@_column_total_height:) -- (0,0); \end{tikzpicture} } % \end{macrocode} %\end{function} % %\begin{function}{\@@_circle:} % Draw a hollow circle with a diameter equal to |\columnseprule|. This will be % used as a tile pattern. % % \begin{macrocode} \cs_set:Npn \@@_circle: { \begin{tikzpicture}[x=1pt,y=1pt,inner~sep=0pt,outer~sep=0pt] \draw (0,0) circle[radius=.5\columnseprule]; \end{tikzpicture} } % \end{macrocode} %\end{function} % %\begin{function}{\@@_solid_circle:} % Draw a filled circle with a diameter equal to |\columnseprule|. This will be % used as a tile pattern. % % \begin{macrocode} \cs_set:Npn \@@_solid_circle: { \begin{tikzpicture}[x=1pt,y=1pt,inner~sep=0pt,outer~sep=0pt] \fill (0,0) circle[radius=.5\columnseprule]; \end{tikzpicture} } } % \end{macrocode} %\end{function} % % In case \pkg{tikz} functions are not active, we provide stubs % that issue error messages. % % \begin{macrocode} { \cs_set:Npn \@@_tikz_picture:n #1 {\msg_error:nnn {multicolrule} {tikz-required} {#1}} \cs_new:Npn \@@_pattern_line:n #1 {\msg_error:nnn {multicolrule} {tikz-required} {#1}} \cs_new:Npn \@@_circle: {\msg_error:nnn {multicolrule} {tikz-required} {circles}} \cs_new:Npn \@@_solid_circle: {\msg_error:nnn {multicolrule} {tikz-required} {solid-circles}} } % \end{macrocode} % % \subsection{Color} %\begin{function}{\@@_set_rule_color:} % Reset color definition in \cs{columnseprulecolor} by name or % by model and color specification. % % \begin{macrocode} \cs_new_protected:Npn \@@_set_rule_color: { \tl_if_empty:NT \l_@@_color_name_tl { \tl_set:Nn \l_@@_color_name_tl {black} } \tl_if_empty:NTF \l_@@_color_model_tl { \cs_set:Npn \columnseprulecolor {\color{\l_@@_color_name_tl}} } { \cs_set:Npn \columnseprulecolor {\color[\l_@@_color_model_tl]{\l_@@_color_name_tl}} } } % \end{macrocode} %\end{function} % % \subsection{Patterns} % %\begin{function}{\@@_set_pattern_list:n} % Sets a comma-separated list of patterns as a sequence for later use. The % global counter that indicates where we are in the list is also reset here, so % setting a list of patterns always means that the next rule will use the first % pattern in the list. % \begin{macrocode} \cs_new_protected:Npn \@@_set_pattern_list:n #1 { \seq_set_split:Nnn \l_@@_pattern_list_seq {,} {#1} \int_gzero:N \g_@@_pattern_count_int \int_gzero:N \g_@@_pattern_after_int \int_gset:Nn \g_@@_pattern_for_int {-1} } % \end{macrocode} %\end{function} % %\begin{function}{\@@_set_pattern:n} % % Set the keys an individual pattern. To avoid potential recursion and loops, % we filter out the key `pattern' when it appears in a pattern definition. % \begin{macrocode} \cs_new_protected:Npn \@@_set_pattern:n #1 { \prop_get:NnNTF \g_@@_patterns_prop {#1} \l_tmpa_tl { \keys_set_filter:nnV {mcrule} {patterns} \l_tmpa_tl } { \msg_error:nnn {multicolrule} {pattern-undefined} {#1} } \tl_set:Nn \l_tmpa_tl {\prop_item:Nn \g_@@_patterns_prop {#1}} } \cs_generate_variant:Nn \@@_set_pattern:n {V} % \end{macrocode} %\end{function} % % \subsection{Key-Values} % Set up all the key definitions. For the line styles, this involves % resetting \cs{mcrule_divider:} to an appropriate value. % \changes{v1.1}{2018/12/21}{Added extend-top, extend-bot, extend-fill, and % extend-reserve keys} % \changes{v1.2}{2019/1/1}{Added patterns, pattern-after, and pattern-for % keys} % % \begin{macrocode} \keys_define:nn {mcrule} { extend-top .dim_set:N = \l_@@_extend_top_dim, extend-bot .dim_set:N = \l_@@_extend_bot_dim, extend-fill .bool_set:N = \l_@@_extend_fill_bool, extend-fill .default:n = true, extend-reserve .dim_set:N = \l_@@_extend_reserve_dim, line-style .choice:, line-style / default .code:n = \cs_set:Npn \mcrule_divider: {\vrule\@width\columnseprule}, line-style / solid .code:n = \cs_set:Npn \mcrule_divider: {\@@_solid_line:}, line-style / dots .code:n = \cs_set:Npn \mcrule_divider: {\@@_tile_pattern:nnn {.}{1pt}{1pt}}, line-style / dense-dots .code:n = \cs_set:Npn \mcrule_divider: {\@@_tile_pattern:nnn {.}{1pt}{0pt}}, line-style / loose-dots .code:n = \cs_set:Npn \mcrule_divider: {\@@_tile_pattern:nnn {.}{2pt}{2pt}}, line-style / circles .code:n = \cs_set:Npn \mcrule_divider: {\@@_tile_pattern:nnn {\@@_circle:}{1pt}{1pt}}, line-style / dense-circles .code:n = \cs_set:Npn \mcrule_divider: {\@@_tile_pattern:nnn {\@@_circle:}{1pt}{0pt}}, line-style / loose-circles .code:n = \cs_set:Npn \mcrule_divider: {\@@_tile_pattern:nnn {\@@_circle:}{2pt}{2pt}}, line-style / solid-circles .code:n = \cs_set:Npn \mcrule_divider: {\@@_tile_pattern:nnn {\@@_solid_circle:}{1pt}{1pt}}, line-style / dense-solid-circles .code:n = \cs_set:Npn \mcrule_divider: {\@@_tile_pattern:nnn {\@@_solid_circle:}{1pt}{0pt}}, line-style / loose-solid-circles .code:n = \cs_set:Npn \mcrule_divider: {\@@_tile_pattern:nnn {\@@_solid_circle:}{2pt}{2pt}}, line-style / dotted .code:n = \cs_set:Npn \mcrule_divider: {\@@_line_pattern:nnnn {dotted}{\columnseprule}{1pt}{1pt}}, line-style / densely-dotted .code:n = \cs_set:Npn \mcrule_divider: {\@@_line_pattern:nnnn {densely~dotted}{\columnseprule}{1pt}{0pt}}, line-style / loosely-dotted .code:n = \cs_set:Npn \mcrule_divider: {\@@_line_pattern:nnnn {loosely~dotted}{\columnseprule}{2pt}{2pt}}, line-style / dashed .code:n = \cs_set:Npn \mcrule_divider: {\@@_line_pattern:nnnn {dashed}{3pt}{1.5pt}{1.5pt}}, line-style / densely-dashed .code:n = \cs_set:Npn \mcrule_divider: {\@@_line_pattern:nnnn {densely~dashed}{3pt}{1pt}{1pt}}, line-style / loosely-dashed .code:n = \cs_set:Npn \mcrule_divider: {\@@_line_pattern:nnnn {loosely~dashed}{3pt}{3pt}{3pt}}, line-style / dash-dot .code:n = \cs_set:Npn \mcrule_divider: {\@@_pattern_line:n{dash~dot}}, line-style / densely-dash-dot .code:n = \cs_set:Npn \mcrule_divider: {\@@_pattern_line:n{densely~dash~dot}}, line-style / loosely-dash-dot .code:n = \cs_set:Npn \mcrule_divider: {\@@_pattern_line:n{loosely~dash~dot}}, line-style / dash-dot-dot .code:n = \cs_set:Npn \mcrule_divider: {\@@_pattern_line:n{dash~dot~dot}}, line-style / densely-dash-dot-dot .code:n = \cs_set:Npn \mcrule_divider: {\@@_pattern_line:n{densely~dash~dot~dot}}, line-style / loosely-dash-dot-dot .code:n = \cs_set:Npn \mcrule_divider: {\@@_pattern_line:n{loosely~dash~dot~dot}}, color .code:n = { \tl_set:Nn \l_@@_color_name_tl {#1} \@@_set_rule_color: }, color-model .code:n = { \tl_set:Nn \l_@@_color_model_tl {#1} \@@_set_rule_color: }, custom-line .code:n = \cs_set:Npn \mcrule_divider: {\@@_tikz_picture:n {#1}}, custom-pattern .code:n = \cs_set:Npn \mcrule_divider: {\@@_pattern:nnn #1}, custom-tile .code:n = \cs_set:Npn \mcrule_divider: {\@@_tile_pattern:nnn #1}, width .choice:, width / ultra-thin .code:n = \dim_set:Nn \columnseprule {0.1pt}, width / very-thin .code:n = \dim_set:Nn \columnseprule {0.2pt}, width / thin .code:n = \dim_set:Nn \columnseprule {0.4pt}, width / semithick .code:n = \dim_set:Nn \columnseprule {0.6pt}, width / thick .code:n = \dim_set:Nn \columnseprule {0.8pt}, width / very-thick .code:n = \dim_set:Nn \columnseprule {1.2pt}, width / ultra-thick .code:n = \dim_set:Nn \columnseprule {1.6pt}, width / unknown .code:n = \dim_set:Nn \columnseprule {#1}, repeat .int_set:N = \l_@@_repeat_int, repeat-distance .dim_set:N = \l_@@_repeat_distance_dim, single .meta:n = { repeat = 1, repeat-distance = #1 }, single .default:n = \columnseprule, double .meta:n = { repeat = 2, repeat-distance = #1 }, double .default:n = \columnseprule, triple .meta:n = { repeat = 3, repeat-distance = #1 }, triple .default:n = \columnseprule, patterns .code:n = \@@_set_pattern_list:n {#1}, patterns .groups:n = {patterns}, pattern-after .int_gset:N = \g_@@_pattern_after_int, pattern-for .int_gset:N = \g_@@_pattern_for_int, } % \end{macrocode} % % \subsection{User Interface} % %\begin{macro}{\SetMCRule} % Set all keys for \mcrule{} % \begin{syntax} % |\SetMCRule| \marg{key-value list} % \end{syntax} % All we do here is pass the argument to expl3's key-setting routine. % \begin{macrocode} \NewDocumentCommand{\SetMCRule}{m} { \keys_set:nn {mcrule} {#1} } % \end{macrocode} %\end{macro} % %\begin{macro}{\DeclareMCRulePattern} % Declare a new style pattern. % \begin{syntax} % |\DeclareMCRule| \marg{name} \marg{key-value list} % \end{syntax} % If a pattern of that name exists, it will be overwritten silently. % \begin{macrocode} \NewDocumentCommand{\DeclareMCRulePattern}{m m} { \prop_gput:Nnn \g_@@_patterns_prop {#1} {#2} } % \end{macrocode} %\end{macro} % %\end{implementation} % % \PrintChanges % % \PrintIndex