% \CheckSum{506}
% \iffalse meta-comment
%
% marginnote.dtx
%
%% Copyright (c) Markus Kohm  2005-2006
%%
%% This work may be distributed and/or modified under the
%% conditions of the LaTeX Project Public License, either version 1.3
%% of this license or (at your option) any later version.
%% The latest version of this license is in
%% http://www.latex-project.org/lppl.txt
%% and version 1.3 or later is part of all distributions of LaTeX
%% version 2003/12/01 or later.
%% 
%% This work has the LPPL maintenance status "maintained".
%%
%% The author of the initial version of these work was 
%% Markus Kohm <komascript@gmx.info>
%% 
%% This work consists of the files marginnote.dtx, marginnote.ins,
%% and REAMDE.
%%
%
%<*driver>
\ProvidesFile{marginnote.dtx}[%
%</driver>
%<package>\ProvidesPackage{marginnote}[%
%<*driver|package>
  2006/10/26 v1.1 non floating margin notes for LaTeX]
%</driver|package>
%<*driver>
\documentclass{ltxdoc}
\begin{document}
\RecordChanges
\DocInput{marginnote.dtx}
\end{document}
%</driver>
%\fi
%
% \GetFileInfo{marginnote.dtx}
%
% \title{Non-Floating Margin Notes with \textsf{marginnote}
%   Package\thanks{This file has version number \fileversion, last revised
%     \filedate.}}
% \author{Markus Kohm\thanks{Email: \texttt{komascript@gmx.info}}}
% \date{\filedate}
% \maketitle
%
% \begin{abstract}
%   In \LaTeX{} the command \cs{marginpar}\oarg{left}\marg{right} might be
%   used to create a note in the margin. But there is a problem with this
%   command: it creates a special kind of float. For this it cannot be used
%   e.g. at floats or footnotes. Package \textsl{marginnote} supports another
%   command \cs{marginnote} to create notes in the margin. This does not use a
%   kind of float and for this does not have the disadvantage of
%   \cs{marginpar}. But there might be other problems \dots
% \end{abstract}
%
% \changes{v1.0b}{2006/14/03}{spelling fixes}
%
% \section{How to Use \textsf{marginnote} Package}
%
% First of all you have to load. You may use:
% \begin{verbatim}
% \usepackage{marginnote}
% \end{verbatim}\vskip-\baselineskip
% to do so.
%
% \DescribeMacro{\marginnote}
% The command \cs{marginnote}\oarg{left}\marg{right}\oarg{voffset} my be used
% to set a margin note using \textsf{marginnote}. The first optional argument
% and the mandatory argument are same using \cs{marginpar} from the \LaTeX{}
% kernel. Even \cs{reversemarginpar} will be considered. The note \meta{left}
% or \meta{right} will be put at the current vertical position. Second
% optional argument \meta{voffset} may be used to adjust the vertical position
% of the margin note. Use a negative dimension to move it up or a positive
% dimension to move it down.
%
% \DescribeMacro{\marginnoteleftadjust}
% \DescribeMacro{\marginnoterightadjust}
% At some environments, e.g. \texttt{framed} from the \textsf{framed} package
% the horizontal placement of the margin notes are not correct. In this case
% you may redefine \cs{marginnoteleftadjust} and \cs{marginnoterightadjust} to
% fix this. Note that these are macros not lengths! So you have to use
% \cs{renewcommand}, \cs{def} or \cs{let} to change them. You may e.g. use
% \begin{verbatim}
% \begingroup
%   \makeatletter
%   \g@addto@macro\framed{%
%     \let\marginnoteleftadjust\FrameSep
%     \let\marginnoterightadjust\FrameSep
%   }
% \endgroup
% \end{verbatim}\vskip-\baselineskip
% at your preamble after loading package \textsf{framed} to fix the problem
% using \texttt{framed} environment.
%
% NOTE: \cs{marginnoteleftadjust} and \cs{marginnoterightadjust} will be used
% only, if the correct horizontal possition cannot determined using PDF\TeX{}
% features (\cs{pdfsavepos} and \cs{pdflastxpos}). So if you are using
% PDF\LaTeX{} with PDF output you will not need to use the example code above,
% but you will need at least two PDF\LaTeX{} runs to get the correct
% horizontal possitions of the margin notes.
%
% \DescribeMacro{\marginnotetextwidth}
% Package \textsl{marginnote} needs to know the real width of the type area to
% find the right margin. While some environments (e.g. thos of package
% \textsl{framed}) change \cs{textwidth}, \textsl{marginnote} defines it's own
% text width macro. If you change type area after \cs{begin\{document\}} you
% should add
% \begin{verbatim}
%   \edef\marginnotetextwidth{\the\textwidth}
% \end{verbatim}\vskip-\baselineskip
% after changing the type area. Maybe you should do this globally using
% \verb|\xdef| instead of \verb|\edef|. Most users will never need to change
% \cs{marginnotetextwidth}.
%
% \DescribeMacro{\marginnotevadjust}
% At some environments the vertical adjustment of the margin note will be
% wrong, e.g. one base line to low. In this case you may use the additional
% optional argument of \cs{marginnote} at every usage of \cs{marginnote} or
% redefine \cs{marginnotevadjust} at the begin of the environment. The default
% definition is \texttt{0pt}.
%
% \DescribeMacro{\raggedleftmarginnote}
% \DescribeMacro{\raggedrightmarginnote}
% These macros define how the margin note will be aligned. The defaults are:
% \begin{itemize}
% \item align margin notes at the left margin right to the margin,
% \item align margin notes at the right margin left to the margin.
% \end{itemize}
% You may change this using \cs{renewcommand}, e.g. use^^A
% \changes{v1.0a}{2006/02/06}{Example to macros \cs{raggedleftmarginnote} and
%   \cs{raggedrightmarginnote} at documentation fixed [thanks to Susumu
%   Tanimura].}
% \begin{verbatim}
% \renewcommand*{\raggedleftmarginnote}{}
% \renewcommand*{\raggedrightmarginnote}{\centering}
% \end{verbatim}\vskip-\baselineskip
% to get justified text at the left and centered text at the right margin.
%
% \DescribeMacro{\marginfont}
% This macro defines the font that will be used to set margin notes. The
% default is \cs{normalcolor}. You may use \cs{renewcommand} to change this,
% e.g. use
% \begin{verbatim}
% \renewcommand*{\marginfont}{\color{red}\sffamily}
% \end{verbatim}\vskip-\baselineskip
% to get red colored margin notes in sans serif font family. You need to load
% e.g. package \textsf{color} to use \cs{color}.
%
%
% \section{Known Problems Using \textsf{marginnote}}
%
% At double side layout (e.g. using class option \texttt{twoside})
% \cs{marginnote} needs to know the number of the current page to decide
% wether the page is odd or even and so wether to use left or right
% margin. \LaTeX{} uses an asynchronous output. Because of this counter
% \texttt{page} should not be used to get the number of the current page
% unless you are at page head or foot. To solve the problem
% \textsf{marginnote} uses a mechanism similar to labels. But this means, that
% the correct margin won't be known at this \LaTeX{} run but only at the
% next. So after adding or deleting a margin note or after each change of page
% break you need two \LaTeX{} runs to get all margins right.
%
% The command \cs{marginnote} uses \cs{strut} and \cs{vadjust} to put the
% margin note at the correct position. But under some circumstances this may
% fail. You may adjust the vertical position of the margin note using the
% second optional argument of \cs{marginnote}. Sometimes even the text outside
% \cs{marginnote} will be moved because of using \cs{marginnote}. There's
% currently no other solution for this problem then moving the \cs{marginnote}
% command.
%
% Note: The margin note will be placed at the current vertical line. This
% means, if you are using two \cs{marginnote} commands at the same line, they
% will be put on the same place. This is not a bug but a feature!
%
% No page break may occure inside a margin note created with \cs{marginnote}.
%
% \cs{marginnote} somewhat different from \cs{marginpar} if used immediate
% after \cs{item}. This is not a bug, it's a feature!
%
% With math \cs{marginnote} may work or may not depending on the math
% environment.
%
% If you are using PDF\LaTeX{} with PDF output and the horizontal possition of
% a margin note is wrong, do one more PDF\LaTeX{} run.
%
% Sometimes lines are stretched vertically using \cs{marginnote}, e.g.\ if
% you're using \cs{marginnote} at a list \emph{and} upper case umlauts like
% ``\"U''. In this case \verb|\lineskiplimit=-\maxdimen| should help.
%
% You should not use \cs{marginnote} at the optional argument of \cs{item}.
%
%
% \StopEventually{\PrintIndex\PrintChanges}
%
% \section{Implementation}
%
% \iffalse
%<*package>
% \fi
%
% First declare and process the options.
%
% \begin{macro}{\if@mn@verbose}
% Use verbose output mode by default. But you may change this using option
% \texttt{quiet}.
%    \begin{macrocode}
\newif\if@mn@verbose\@mn@verbosetrue
\DeclareOption{verbose}{\@mn@verbosetrue}
\DeclareOption{quiet}{\@mn@verbosefalse}
%    \end{macrocode}
% \end{macro}
%
%    \begin{macrocode}
\ExecuteOptions{verbose}
\ProcessOptions\relax
%    \end{macrocode}
%
% \begin{macro}{\newmarginnote}
%   We need a macro to define a new note at the \texttt{aux} file. This will
%   be done using the mechanism of \LaTeX{} that is used for
%   \cs{newlabel}. But we use another prefix. This will result in the usual
%   ``Labels(s) may have changed. Rerun to get cross-references right.'' if a
%   margin note is new or have moved to another page.
%    \begin{macrocode}
\newcommand*{\newmarginnote}{\@newl@bel{mn}}
%    \end{macrocode}
% \end{macro}
%
% \begin{macro}{\if@mn@pdfmode}
%   \changes{v1.1}{2006/10/23}{new switch}
% We need to know, wether or not PDF\TeX{} is used. With PDF\TeX{} the
% horizontal output possition may be detected using \cs{pdfsavepos} and
% \cs{pdflastxpos}. So the relative position of the margin may be
% calculated. Without PDF\TeX{} only manual adjustment is available. While PDF
% mode or not may change before start of the document, setting up the switch
% is delayed.
%    \begin{macrocode}
\newif\if@mn@pdfmode\@mn@pdfmodefalse
\AtBeginDocument{%
  \begingroup\expandafter\expandafter\expandafter\endgroup
  \expandafter\ifx\csname pdflastxpos\endcsname\relax\else
    \begingroup\expandafter\expandafter\expandafter\endgroup
    \expandafter\ifx\csname pdfoutput\endcsname\relax\else
      \ifcase\pdfoutput\else\@mn@pdfmodetrue\fi
    \fi
  \fi
  \if@mn@verbose
    \if@mn@pdfmode
      \PackageInfo{marginnote}{%
        \string\pdfoutput\space not 0 and \string\pdflastxpos\space
        available.\MessageBreak
        Extended possition detection mode activated\@gobble
      }%
    \else
      \PackageInfo{marginnote}{%
        either \string\pdflastxpos\space or \string\pdfoutput\space not
        available\MessageBreak
        or \string\pdfoutput\space set to 0.\MessageBreak
        Extended possition detection mode deactivated\@gobble
      }%
    \fi
  \fi
}
%    \end{macrocode}
% \end{macro}
%
% \begin{macro}{\marginnotetextwidth}
%   \changes{v1.1}{2006/10/23}{new macro}
% Some environments change \cs{textwidth}. But at PDF mode we need to know the
% real text width to find the right margin. So we use our own text width
% macro. Sometimes it may be usefull if the user can set it up. Because of
% this it is a user command.
%    \begin{macrocode}
\newcommand*{\marginnotetextwidth}{}
\let\marginnotetextwidth\textwidth
\AtBeginDocument{\if@mn@pdfmode\edef\marginnotetextwidth{\the\textwidth}\fi}
%    \end{macrocode}
% \end{macro}
%
% \begin{macro}{\@mn@margintest}
%   \changes{v1.1}{2006/10/23}{new PDF mode feature}
% \begin{macro}{\@mn@thispage}
% \begin{macro}{\@mn@atthispage}
% \begin{macro}{\@mn@currpage}
%   \changes{v1.1}{2006/10/23}{new (internal)}
% \begin{macro}{\@mn@currxpos}
%   \changes{v1.1}{2006/10/23}{new (internal)}
% \begin{macro}{mn@abspage}
%   Macro \cs{@mn@margintest} does the complete test, which margin to use. The
%   result may be found at \cs{if@tempswa}. To avoid changes on the last page
%   if there is a new note on the first page, try to count the notes by
%   page. We know that this can not be successfull, but never the less it may
%   be a good try. \cs{@mn@thispage} saves the page number of the last usage
%   of \cs{@mn@margintest}. \cs{@mn@atthispage} saves the number of margin
%   note at this page. But we need to know the absolut page number to do
%   this. So we increase the absolut page number \texttt{mn@abspage} at every
%   \cs{@outputpage}. \cs{@mn@currpage} is the page from the page label if
%   found. \cs{@mn@currxpos} is somehow special. Using PDF\TeX{} the real $x$
%   possition may be written with the page label and used to calculate the
%   correct horizontal offset. In this case \cs{marginnoteleftadjust} and
%   \cs{marginnoterightadjust} will not be used!
%    \begin{macrocode}
\newcommand*{\@mn@thispage}{}
\newcommand*{\@mn@currpage}{}
\newcommand*{\@mn@currxpos}{}
\newcounter{mn@abspage}
\AtBeginDocument{\setcounter{mn@abspage}{1}%
  \g@addto@macro\@outputpage{\stepcounter{mn@abspage}}}
\newcommand*{\@mn@margintest}{%
%    \end{macrocode}
%   Number of the next margin note at this page.
%    \begin{macrocode}
  \expandafter\ifx\csname @mn@thispage\endcsname\@empty
    \gdef\@mn@atthispage{1}%
  \else\expandafter\ifnum \@mn@thispage=\value{mn@abspage}%
      \begingroup
        \@tempcnta\@mn@atthispage\advance\@tempcnta by \@ne
        \xdef\@mn@atthispage{\the\@tempcnta}%
      \endgroup
    \else
      \gdef\@mn@atthispage{1}%
    \fi
  \fi
  \xdef\@mn@thispage{\themn@abspage}%
%    \end{macrocode}
%   Use the number of the page and the number of the margin note at this page
%   to save the real number of this page at the \texttt{aux} file. At PDF mode
%   save the current $x$ possition too.
%    \begin{macrocode}
  \let\@mn@currpage\relax
  \let\@mn@currxpos\relax
  \if@mn@pdfmode
    \pdfsavepos
    \protected@write\@auxout{\let\themn@abspage\relax}{%
      \string\newmarginnote{note.\@mn@thispage.\@mn@atthispage}{%
        {\themn@abspage}{\noexpand\number\pdflastxpos sp}}%
    }%
  \else
    \protected@write\@auxout{\let\themn@abspage\relax}{%
      \string\newmarginnote{note.\@mn@thispage.\@mn@atthispage}{%
        {\themn@abspage}{}}%
    }%
  \fi
%    \end{macrocode}
%   If the margin note label was not defined, it seams to be new. In this case
%   the absolut page number will be used for the test instead of the saved
%   real page number.
%    \begin{macrocode}
  \expandafter\ifx\csname mn@note.\@mn@thispage.\@mn@atthispage\endcsname\relax
%    \end{macrocode}
%   If we are not in two side mode, we are on a odd page.
%    \begin{macrocode}
    \if@twoside
      \if@mn@verbose
        \PackageInfo{marginnote}{Suggest that margin
          note \@mn@thispage.\@mn@atthispage\space will be on\MessageBreak
          absolute page \themn@abspage.\MessageBreak
          This may be wrong}%
      \fi
      \ifodd\value{mn@abspage}\@tempswatrue\else\@tempswafalse\fi
    \else
      \if@mn@verbose
        \PackageInfo{marginnote}{right page because not two side mode}%
      \fi
      \@tempswatrue
    \fi
  \else
    \edef\@mn@currpage{\csname
      mn@note.\@mn@thispage.\@mn@atthispage\endcsname}%
    \edef\@mn@currxpos{\expandafter\@secondoftwo\@mn@currpage}%
    \edef\@mn@currpage{\expandafter\@firstoftwo\@mn@currpage}%
    \if@mn@verbose
      \PackageInfo{marginnote}{Margin note \@mn@thispage.\@mn@atthispage\space
        is on absolute page \@mn@currpage\MessageBreak}%
    \fi
    \if@twoside
      \ifodd\@mn@currpage\relax
        \@tempswatrue
      \else
        \@tempswafalse
      \fi
    \else
      \if@mn@verbose
        \PackageInfo{marginnote}{right page because not two side mode}%
      \fi
      \@tempswatrue
    \fi
  \fi
}
%    \end{macrocode}
% \end{macro}
% \end{macro}
% \end{macro}
% \end{macro}
% \end{macro}
% \end{macro}
%
% \begin{macro}{\marginnote}
% \begin{macro}{\@mn@marginnote}
% \begin{macro}{\@mn@@marginnote}
% \begin{macro}{\@mn@@@marginnote}
%   \changes{v1.1}{2006/10/23}{new PDF mode feature}
% Command \cs{marginnote} is the main macro of the package. The others are
% helpers to manage the optional arguments.
%    \begin{macrocode}
\newcommand*{\marginnote}{%
  \@dblarg\@mn@marginnote
}
\newcommand{\@mn@marginnote}[2][]{%
  \ifhmode
    \@bsphack
    \begingroup
    \ifdim\@savsk>\z@\else
      \def\:{\@xifnch}\expandafter\def\: { \futurelet\@let@token\@ifnch}%
    \fi
  \else
    \begingroup
  \fi
  \@ifnextchar [{\@mn@@marginnote[{#1}]{#2}}{\@mn@@marginnote[{#1}]{#2}[\z@]}%
}
\newcommand{\@mn@@marginnote}{}
\def\@mn@@marginnote[#1]#2[#3]{%
  \endgroup
%    \end{macrocode}
% In horizontal mode the space hack of the \LaTeX{} kernel will be used. In
% vertical mode this should not be used.
%    \begin{macrocode}
  \ifhmode
    \@mn@@@marginnote[{#1}]{#2}[{#3}]%
    \@esphack
  \else
    \@mn@@@marginnote[{#1}]{#2}[{#3}]%
  \fi
}
\newcommand{\@mn@@@marginnote}{}
\def\@mn@@@marginnote[#1]#2[#3]{%
%    \end{macrocode}
% All changes (but change of counters that are global because of using the
% \LaTeX{} commands to change them an \cs{gdef} and \cs{xdef}) should be
% local. In h-mode a \cs{strut} will be used to fix base line. The margin
% note will be put to vertical list using \cs{vadjust}. This also means that
% wie are one line to deep. This will be corrected later using negative kern.
% In v-mode wie use a special kind of vbox to simply set everything. Math
% mode should behave like v-mode. And if we are just after an item we have
% to leave v-mode first.
%    \begin{macrocode}
  \begingroup
    \ifmmode\strut\let\@tempa\vadjust\else
      \if@inlabel\leavevmode\fi
      \ifhmode\strut\let\@tempa\vadjust\else\let\@tempa\mn@vlap\fi
    \fi
    \@tempa{%
%    \end{macrocode}
% Everything will be put upwards using a vbox with zero height and depth and
% \cs{vss}. At this box the margin test will be done. If cs{reversemargin}
% was used, the logic switchs. Then the note will be places to the margin.
%    \begin{macrocode}
      \vbox to\z@{%
        \vss
        \@mn@margintest
        \if@reversemargin\if@tempswa
            \@tempswafalse
          \else
            \@tempswatrue
        \fi\fi
        \if@tempswa
          \rlap{%
%    \end{macrocode}
% If \cs{@mn@currpos} is neither \cs{relax} nor empty it is the real current
% $x$ possition of the last PDF\LaTeX{} run and may be used to calculate the
% real horizontal offset.
%    \begin{macrocode}
            \ifx\@mn@currxpos\relax
              \kern\marginnoterightadjust
              \if@mn@verbose
                \PackageInfo{marginnote}{%
                  xpos not known,\MessageBreak
                  using \string\marginnoterightadjust}%
              \fi
            \else\ifx\@mn@currxpos\@empty
                \kern\marginnoterightadjust
                \if@mn@verbose
                  \PackageInfo{marginnote}{%
                    xpos not known,\MessageBreak
                    using \string\marginnoterightadjust}%
                \fi
              \else
                \if@mn@verbose
                  \PackageInfo{marginnote}{%
                    xpos seams to be \@mn@currxpos,\MessageBreak
                    \string\marginnoterightadjust
                    \space ignored}%
                \fi
                \begingroup
                  \setlength{\@tempdima}{\@mn@currxpos}%
                  \kern-\@tempdima
                  \if@twoside\ifodd\@mn@currpage\relax
                      \kern\oddsidemargin
                    \else
                      \kern\evensidemargin
                    \fi
                  \else
                    \kern\oddsidemargin
                  \fi
                  \kern 1in
                \endgroup
              \fi
            \fi
            \kern\marginnotetextwidth\kern\marginparsep
            \vbox to\z@{\kern\marginnotevadjust\kern #3
              \vbox to\z@{%
                \hsize\marginparwidth
%    \end{macrocode}
%   Here's the correction of the vertical position. The rest is simple.
%    \begin{macrocode}
                \kern-\baselineskip\kern-\parskip
                \marginfont\raggedrightmarginnote\hspace{\z@}\strut#2\endgraf
                \vss}%
              \vss}%
          }%
        \else
          \llap{%
            \vbox to\z@{\kern #3
              \vbox to\z@{%
                \hsize\marginparwidth
%    \end{macrocode}
%   Same like above for left margins.
%    \begin{macrocode}
                \kern-\baselineskip\kern-\parskip
                \marginfont\raggedleftmarginnote\hspace{\z@}\strut#1\endgraf
                \vss}%
              \vss}%
            \ifx\@mn@currxpos\relax
              \kern\marginnoteleftadjust
              \if@mn@verbose
                \PackageInfo{marginnote}{%
                  xpos not known,\MessageBreak
                  using \string\marginnoteleftadjust}%
              \fi
            \else\ifx\@mn@currxpos\@empty
                \kern\marginnoteleftadjust
                \if@mn@verbose
                  \PackageInfo{marginnote}{%
                    xpos not known,\MessageBreak
                    using \string\marginnoteleftadjust}%
                \fi
              \else
                \if@mn@verbose
                  \PackageInfo{marginnote}{%
                    xpos seams to be \@mn@currxpos,\MessageBreak
                    \string\marginnoteleftadjust
                    \space ignored}%
                \fi
               \begingroup
                  \kern\@mn@currxpos
                  \if@twoside\ifodd\@mn@currpage\relax
                      \kern-\oddsidemargin
                    \else
                      \kern-\evensidemargin
                    \fi
                  \else
                    \kern-\oddsidemargin
                  \fi
                  \kern-1in
                \endgroup
              \fi
            \fi
            \kern\marginparsep
          }%
        \fi
      }%
    }%
  \endgroup
}
%    \end{macrocode}
% \end{macro}
% \end{macro}
% \end{macro}
% \end{macro}
%
% \begin{macro}{\marginnoterightadjust}
% \begin{macro}{\marginnoteleftadjust}
% These may be used to define an automatic horizontal adjust. The default is
% zero. It will be used only if the PDF mode features are not available.
%    \begin{macrocode}
\newcommand*{\marginnoterightadjust}{}
\newcommand*{\marginnoteleftadjust}{}
\let\marginnoterightadjust\z@
\let\marginnoteleftadjust\z@
%    \end{macrocode}
% \end{macro}
% \end{macro}
%
% \begin{macro}{\marginnotevadjust}
% This may be used to define an automatic vertical adjust. The defaul tis
% zero. Values greater than zero will move the margin note down, values less
% than zero will move the margin note up.
%    \begin{macrocode}
\newcommand*{\marginnotevadjust}{}
\let\marginnotevadjust\z@
%    \end{macrocode}
% \end{macro}
%
% \begin{macro}{\mn@vlap}
% This macro is used to set a vertical box without size at vertical mode.
%    \begin{macrocode}
\newcommand{\mn@vlap}[1]{%
  \setbox\@tempboxa\vbox to \ht\strutbox{#1\vss}%
  \box\@tempboxa\vskip-\baselineskip
}
%    \end{macrocode}
% \end{macro}
%
% \begin{macro}{\marginfont}
%  \changes{v1.0a}{2006/02/06}{Use \cs{providecommand} to define it.}
% \begin{macro}{\raggedleftmarginnote}
% \begin{macro}{\raggedrightmarginnote}
%   These are very simple. A class may also define \cs{marginfont}. Use this
%   if available. I don't use \cs{let} for the definitions of the ragged
%   macros, so the meaning may change loading e.g. package \textsf{ragged2e}.
%    \begin{macrocode}
\providecommand*{\marginfont}{}
\newcommand*{\raggedleftmarginnote}{\raggedleft}
\newcommand*{\raggedrightmarginnote}{\raggedright}
%    \end{macrocode}
% \end{macro}
% \end{macro}
% \end{macro}
%
% \Finale
%
\endinput
%
% end of `marginnote.dtx'
%
% \iffalse
%%% Local Variables:
%%% mode: doc-tex
%%% Text-master: t
%%% End:
% \fi