% \iffalse meta-comment
%
% This is file `idxlayout.dtx'.
%
% Copyright (C) 2010 by Thomas Titz <thomas.titz@chello.at>
%
% Permission is granted to distribute and/or modify this work under the
% terms of the LaTeX Project Public License (LPPL), version 1.3c.
%
% The LPPL maintenance status of this work is "maintained".
%
% This work consists of the files idxlayout.dtx, idxlayout.ins and
% README and the derived files idxlayout.pdf and idxlayout.sty.
%
% \fi
%
% \iffalse
%
%<*driver>
\documentclass{ltxdoc}
\EnableCrossrefs 
\CodelineIndex
\RecordChanges
% \OnlyDescription
\GlossaryPrologue{%
  \section*{{Change History}}%
  \markboth{{Change History}}{{Change History}}%
  \vspace{-\multicolsep}%
}
\newcommand*{\SpecialOptIndex}[1]{%
    \index{#1={\protect\sffamily#1} (option)|usage}%
    \index{options:>#1={\protect\sffamily#1}|usage}%
}
\usepackage[columns=3,columnsep=15pt,indentunit=15pt,minspace=100pt,%
    font=small]{idxlayout}
\renewcommand*{\indexjustific}{%
  \setlength{\parindent}{0pt}%
  \setlength{\rightskip}{15pt}%
  \setlength{\parfillskip}{-15pt}%
}
\setindexprenote{%
  \normalsize%
  Numbers written in italic refer to the page where the corresponding
  entry is described; numbers underlined refer to the
  \ifbool{codeline@index}{code line of the }{}%
  definition; numbers in roman refer to the
  \ifbool{codeline@index}{code lines }{pages }%
  where the entry is used.%
}
\usepackage[bottom]{footmisc}
\addtolength{\skip\footins}{5pt}
\usepackage{array,booktabs,caption,enumitem,graphicx,url,varioref}
\frenchspacing
\def\ila/{\textsf{idxlayout}}
\def\KOMA/{\textsf{KOMA-Script}}
\def\mem/{\textsf{memoir}}
\begin{document}
\DocInput{idxlayout.dtx}
\end{document}
%</driver>
%
% \fi
%
% \CheckSum{344}
%
% \CharacterTable
%  {Upper-case    \A\B\C\D\E\F\G\H\I\J\K\L\M\N\O\P\Q\R\S\T\U\V\W\X\Y\Z
%   Lower-case    \a\b\c\d\e\f\g\h\i\j\k\l\m\n\o\p\q\r\s\t\u\v\w\x\y\z
%   Digits        \0\1\2\3\4\5\6\7\8\9
%   Exclamation   \!     Double quote  \"     Hash (number) \#
%   Dollar        \$     Percent       \%     Ampersand     \&
%   Acute accent  \'     Left paren    \(     Right paren   \)
%   Asterisk      \*     Plus          \+     Comma         \,
%   Minus         \-     Point         \.     Solidus       \/
%   Colon         \:     Semicolon     \;     Less than     \<
%   Equals        \=     Greater than  \>     Question mark \?
%   Commercial at \@     Left bracket  \[     Backslash     \\
%   Right bracket \]     Circumflex    \^     Underscore    \_
%   Grave accent  \`     Left brace    \{     Vertical bar  \|
%   Right brace   \}     Tilde         \~}
%
% \changes{v0.4}{2010/01/10}{Initial public release}
%
% \GetFileInfo{idxlayout.sty}
%
% \DoNotIndex{\@minus,\@plus,\begin,\begingroup,\csname,\def,\else,\end}
% \DoNotIndex{\endgroup,\endcsname,\endinput,\expandafter,\fi,\hspace}
% \DoNotIndex{\ifcase,\ifcsname,\item,\let,\MessageBreak}
% \DoNotIndex{\NeedsTeXFormat,\newcommand,\newcounter,\newlength}
% \DoNotIndex{\nobreak,\or,\p@,\par,\ProvidesPackage,\relax}
% \DoNotIndex{\renewcommand,\renewenvironment,\RequirePackage}
% \DoNotIndex{\setcounter,\setlength,\tw@,\vspace,\z@}
%
% \title{The \ila/ package\thanks{This document corresponds to
% \ila/~\fileversion, dated \filedate.}}
% \author{Thomas Titz\thanks{E-mail: \texttt{thomas.titz@chello.at}}}
% \maketitle
%
% \begin{abstract}
% \noindent The \ila/ package offers a key--value interface to configure
% index layout parameters, e.\,g. allowing for three-column indexes or
% for ``parent'' items and their affiliated subitems being typeset as a
% single paragraph. The package is responsive to the index-related
% options and commands of the \KOMA/- and \mem/ classes.
% \end{abstract}
%
% \section{Introduction}
%
% Every once a while, questions pop up on \textsf{comp.text.tex} or
% other \LaTeX-related newsgroups on how to change properties of the
% index layout. The most common request is for an index with three
% instead of two columns. The answer to this~-- although not necessarily
% the implementation~-- is simple: Use a \texttt{multicols} environment.
% An example in the \LaTeX\ Companion \cite[pp. 679--680]{Mit04} shows
% how to do it.
%
% Besides being cumbersome for unversed \LaTeX\ users,\footnote{In the
% words of user InsideMan on \textsf{mrunix.de}, November 27, 2009
% (authors translation): ``I didn't believe this to be so laborious. I'd
% rather have guessed there is a package option to cater for it.''} this
% approach is prone to break index-related options the document class
% might provide (e.\,g. for including the index in the table of
% contents). To address this, the \ila/ package offers a key--value
% interface to configure index layout parameters while emulating and
% extending the relevant functionality of the standard, \KOMA/- and
% \mem/ classes.
%
% Note that \ila/ stays on the \LaTeX\ side of things. If you want to
% add letter headings to each index group or to change the delimiter
% between keyword and first page number, you still have to provide a
% corresponding \textsf{MakeIndex} style file.
%
% This manual is typeset according to the conventions of the \LaTeX\
% \textsc{docstrip} utility which enables the automatic extraction of
% the \LaTeX\ macro source files \cite[ch. 14]{Mit04}. Section~2
% describes the usage of the package, while the optional section~3
% contains the commented source code.
%
% \begin{figure}
% \centering
% \scalebox{0.83}{%
% \begin{minipage}{125mm}
% \columnsep 15pt
% \raggedcolumns
% \begin{multicols}{3}
%
% \idxlayout{columns=1,font=normalsize,justific=raggedright}
% \noindexprenote
%
% \newcommand{\fakeindex}{%
%   \begin{theindex}
%   \item Dion, 2, 3, 5, 8, 13, 21, 1957--1960
%     \subitem and the Belmonts, 1957--1960
%
%   \end{theindex}
% }
%
% \fakeindex
% \idxlayout{itemlayout=relhang}
% \fakeindex
% \idxlayout{itemlayout=singlepar}
% \fakeindex
% \idxlayout{columns=3,itemlayout=abshang,font=small}
%
% \end{multicols}
% \end{minipage}
% }
% \caption{Option \textsf{itemlayout} with values \textsf{abshang},
% \textsf{relhang} and \textsf{singlepar}}
% \label{fig:itemlayout}
% \end{figure}
%
% \section{Using the \ila/ package}
%
% \subsection{Default behaviour}
%
% If you just add |\usepackage{idxlayout}| to your document preamble,
% the package will keep up the index-related behaviour of the document
% class while correcting bugs and taking advantage of \textsf{multicol}
% features. This amounts to the following changes:
%
% \begin{itemize}
%
% \item Columns will be balanced on the last index page.
%
% \item If you are using a class that lacks the |\chapter| command (or
% \mem/ with the option \textsf{article}), the index will behave like a
% normal |\section*|, i.\,e. it will not automatically start a new
% page.\footnote{However, if you typeset your document in
% \textsf{twocolumn} mode, \ila/ will temporarily switch to
% \textsf{onecolumn}, causing a page break in the process.} The first
% index page will also not use a special pagestyle like \textsf{plain}
% appropriate only for chapter headings.
%
% \item When on top of the page, the vertical positioning of the index
% heading will not differ from that of other headings typeset in
% \textsf{onecolumn} mode, i.\,e. \LaTeX\ bug 3126 (|\twocolumn|
% interfering with |\topskip|) will be avoided.
%
% \item With the standard classes \textsf{article}, \textsf{book} and
% \textsf{report}, the space between index columns will be 35\,pt as
% intended.\footnote{In the current version (v1.4h) of these classes,
% the length \texttt{\textbackslash columnsep} is set to 35\,pt, but
% only after \texttt{\textbackslash twocolumn} has been triggered. The
% \KOMA/- and \mem/ classes have either corrected or never introduced
% this bug. See \cite{col05} for details.}
%
% \end{itemize}
%
% \subsection{Options and commands}
%
% The options provided by \ila/ use the key--value interface
% `\meta{key}=\meta{value}'. Unless indicated otherwise, any valid \TeX\
% dimension is a permitted value.
%
% \begin{description}[font=\sffamily]
%
% \item[columns]\SpecialOptIndex{columns} The number of columns used for
% typesetting the index. The permitted values range from 1 to 10, the
% default value is 2. A single-column index is e.\,g. suitable ``for an
% index of first lines in a book of poetry'' \cite[p.
% \textsc{xxix}]{Wil09}.
%
% \item[columnsep]\SpecialOptIndex{columnsep} The space between index
% columns. The default value is 35\,pt. As this is required for
% compatibility rather than suggested by typographic considerations, you
% may want to reduce the value of \textsf{columnsep} to, say, 1 to 1.5
% times the value of \textsf{indentunit}.
%
% \item[rule]\SpecialOptIndex{rule} The thickness of a vertical rule
% between index columns. The default value is 0\,pt, i.\,e. no rule.
%
% \item[itemlayout]\SpecialOptIndex{itemlayout} The layout of index
% items, subitems and subsubitems. The permitted values, which are
% described below, are \textsf{abshang}, \textsf{relhang} and
% \textsf{singlepar}. The default value is \textsf{abshang} (which
% corresponds to standard \LaTeX\ behaviour). See
% figure~\vref{fig:itemlayout} for examples of the various layouts.
%
%    \begin{description}[font=\normalfont\sffamily]
%
%    \item[abshang] Index items feature a hanging indentation of value
% \textsf{hangindent}. Subitems and subsubitems resemble items except
% that their first line is indented by the values of \textsf{subindent}
% and \textsf{subsubindent}, respectively.
%
%    \item[relhang] Differing from \textsf{abshang}, the hanging
% indentations of subitems and subsubitems equal the sum of
% \textsf{hangindent} and the respective first-line indentations.
%
%    \item[singlepar] ``Parent'' items and their affiliated subitems
% (and, if present, subsubitems) are typeset as a single paragraph, with
% a semicolon plus an interword space being used as the default
% delimiter.\footnote{This blends in well with the default behaviour of
% \textsf{MakeIndex} to put a comma plus an interword space between
% keyword and first page number.}
%
%    \end{description}
%
% \item[indentunit]\SpecialOptIndex{indentunit} A length that serves as
% a building block for other indentation lengths. The default value is
% 20\,pt. The default values of the options \textsf{hangindent},
% \textsf{subindent} and \textsf{subsubindent} will be set in accordance
% with the chosen values of \textsf{itemlayout} and \textsf{indentunit}
% (see table~\vref{tab:indents}).
%
% \item[hangindent]\SpecialOptIndex{hangindent} Use this option to
% override the default value of \textsf{hangindent}.
%
% \item[subindent]\SpecialOptIndex{subindent} Use this option to
% override the default value of \textsf{subindent}.
%
% \item[subsubindent]\SpecialOptIndex{subsubindent} Use this option to
% override the default value of \textsf{subsubindent}.
%
% \begin{table}
% \centering
% \small
% \caption{Default values of options \textsf{hangindent},
% \textsf{subindent} and \textsf{subsubindent}}
% \begin{tabular}{>{\centering\hspace{0pt}}p{22mm}ccc}
% \toprule
% Value of option \\ \textsf{itemlayout} & \multicolumn{3}{c}{Default
% value (multiple of \textsf{indentunit})} \\
% \cmidrule(l){2-4}
% & \textsf{hangindent} & \textsf{subindent} & \textsf{subsubindent }\\
% \midrule
% \textsf{abshang} & 2 & 1 & 1.5 \\
% \textsf{relhang} & 1.5 & 1 & 2 \\
% \textsf{singlepar} & 1 & -- & -- \\
% \bottomrule
% \end{tabular}
% \label{tab:indents}
% \end{table}
%
% \item[initsep]\SpecialOptIndex{initsep} The vertical space inserted
% between index groups with differing initial letters. The default value
% is 10\,pt plus 5\,pt minus 3\,pt.
%
% \item[notesep]\SpecialOptIndex{notesep} The vertical space inserted
% between a possible prenote and the first index entry. The default
% value is one times the value of \textsf{initsep}.
%
% \item[minspace]\SpecialOptIndex{minspace} The vertical space needed on
% the current page to prevent the index from starting a new page. The
% default value is 80\,pt. You may want to increase the value of
% \textsf{minspace} if the index includes a prenote containing several
% lines.
%
% \item[font]\SpecialOptIndex{font} The font used for typesetting the
% index. The permitted values are \textsf{current} (i.\,e. the font in
% effect at the time of |\printindex|), \textsf{normalsize},
% \textsf{small} and \textsf{footnotesize}. The default value is
% \textsf{current}.
%
% \item[justific]\SpecialOptIndex{justific} The justification of index
% columns. The permitted values are \textsf{standard} (i.\,e. left and
% right margin justified), \textsf{raggedright} and \textsf{RaggedRight}
% (which uses the command of the same name of the \textsf{ragged2e}
% package). The default value is \textsf{standard}.
%
% \item[totoc]\SpecialOptIndex{totoc} A boolean option that controls
% whether the index is included in the table of contents. The default
% value is \textsf{false}. You may simply specify \textsf{totoc}, which
% is equivalent to \textsf{totoc=true}.
%
% \end{description}
%
% \DescribeMacro{\setindexprenote}
% \DescribeMacro{\noindexprenote}
% Use the command |\setindexprenote|\{\meta{Some text}\} to typeset
% explanatory text after the index heading. As a default, the prenote
% (which may span several paragraphs) is set in the same font as the
% index. Font changes within the argument of |\setindexprenote| won't
% affect the index proper. A vertical space controlled by the
% \textsf{notesep} option is inserted between the prenote and the first
% index entry. With multiple indexes, use the command |\noindexprenote|
% to reset the prenote text to empty and to take care of the proper
% spacing between index heading and first entry.
%
% \DescribeMacro{\idxlayout}
% The command |\idxlayout|, which takes a comma-separated list of
% key--value options as argument, allows to change index layout
% parameters within the document. A typographically sound example is
% provided by \cite{Mit04} which typesets a general index in two columns
% and then switches to three columns for an index of names.
%
% \DescribeMacro{\indexfont}
% \DescribeMacro{\indexjustific}
% If the permitted values of the options \textsf{font} and
% \textsf{justific} do not cover your needs, you can resort to
% redefining the commands |\indexfont| and |\indexjustific|, e.\,g. by
% including |\renewcommand*{\indexfont}{\tiny\bfseries}| in your
% document preamble.\footnote{See the file |idxlayout.dtx| for the
% redefinition of \texttt{\textbackslash indexjustific} carried out in
% order to use \ila/ with the \textsf{ltxdoc} class.}
%
% \DescribeMacro{\indexsubsdelim}
% Redefine the command |\indexsubsdelim| if you happen to dislike the
%default delimiter used with the option \textsf{itemlayout=singlepar}.
%
% \subsection{Compatibility issues and notes}
%
% \ila/ has been tested with the standard classes \textsf{article},
% \textsf{book} and \textsf{report} (v1.4h), the \KOMA/-classes
% \textsf{scrartcl}, \textsf{scrbook} and \textsf{scrreprt} (v3.04a) and
% the \mem/ class (v1.61803398c). It is responsive to their
% index-related options and commands:
%
% \begin{itemize}
%
% \item The \KOMA/ options for including the index in the table of
% contents (e.\,g. \textsf{index=totoc}) and the respective \mem/
% commands (e.\,g. |\indexintoc|) are recognized and can be mixed with
% the \ila/ option \textsf{totoc}.
%
% \item The \mem/ lengths |\indexcolsep| and |\indexrule| are supported,
% and it is possible to alternate between setting these lengths and
% using the respective \ila/ options \textsf{columnsep} and
% \textsf{rule}.
%
% \item The \mem/ commands |\onecolindex| and |\twocolindex| are
% recognized. (For an index with three or more columns, use the \ila/
% option \textsf{columns}.)
%
% \item The \KOMA/ command |\setindexpreamble| and the \mem/ command
% |\preindexhook| are supported. Note that both of them operate
% independently of the \ila/ commands |\setindexprenote| and
% |\noindexprenote|.
%
% \end{itemize}
%
% When using \ila/ together with the \textsf{splitidx} package, issue
% the \textsf{splitidx} command |\extendtheindex| only after having
% loaded \ila/.
%
% If you use the \textsf{tocbibind} package, you must load it before
% \ila/. The influence of \textsf{tocbibind} on including the index in
% the table of contents will be removed, so use the \ila/ option
% \textsf{totoc} instead.\footnote{Just in case you ask, numbering the
% index heading is not supported by \ila/ because it is a bad idea from
% a typographic point of view. See \cite[pp. 86--87]{Koh08} for
% details.}
%
% The packages \textsf{multind} (from 1991) and \textsf{index} (from
% 1995/2004) are not supported. If you're feeling so lucky as to use
% \textsf{index}, load it before \ila/.
%
% The \textsf{ragged2e} package must be loaded before \ila/ in order to
% use the option \textsf{justific=RaggedRight}.
%
% As \ila/ is based on the \textsf{multicol} package, the appearance of
% the index is affected by any \textsf{multicol} parameter not
% overridden by \ila/. Use the command |\raggedcolumns| if you aim at
% typesetting the index on a grid.
%
% \StopEventually{%
%
% \bibliographystyle{plain}
%
% \begin{thebibliography}{9}
%
% \bibitem{col05}
% ``columnsep in theindex (TLC2 and memoir)''.
% Series of messages on \textsf{comp.text.tex}, May 22--29, 2005.
% \url{http://groups.google.com/group/comp.text.tex/browse_thread/thread/937744003315b784}
% (accessed January 2, 2010).
%
% \bibitem{dec09}
% ``\textbackslash DeclareStringOption''.
% Series of messages on \textsf{comp.text.tex}, December 14, 2009.
% \url{http://groups.google.com/group/comp.text.tex/browse_thread/thread/1fb53938ac0026c5}
% (accessed January 2, 2010).
%
% \bibitem{Koh08}
% Kohm, Markus and Jens-Uwe Morawski.
% \emph{KOMA-Script: Eine Sammlung von Klassen und Paketen f\"ur
% \LaTeXe}. 3\textsuperscript{rd} edition.
% Berlin: lehmanns media, 2008.
%
% \bibitem{Mit04}
% Mittelbach, Frank and Michel Goossens.
% \emph{The \LaTeX\ Companion}. 2\textsuperscript{nd} edition.
% Boston: Addison-Wesley, 2004.
%
% \bibitem{Wil09}
% Wilson, Peter.
% \emph{The memoir class for configurable typesetting: User guide}.
% 8\textsuperscript{th} edition.
% Published by the author, 2009.
% \url{http://www.ctan.org/tex-archive/macros/latex/contrib/memoir/memman.pdf}
% (accessed January 2, 2010).
%
% \bibitem{Wri09}
% Wright, Joseph and Christian Feuers\"anger.
% ``Implementing key--value input: An introduction''.
% Preliminary draft, March 17, 2009.
% \url{http://www.texdev.net/wp-content/uploads/2009/03/keyval.pdf}
% (accessed January 2, 2010).
%
% \end{thebibliography}
%
% \PrintIndex
% \PrintChanges
%
% }
%
% \section{The package code}
%
% \subsection{Preliminaries}
%
% Announce the name and version of the package, which requires \LaTeXe.
%    \begin{macrocode}
\NeedsTeXFormat{LaTeX2e}
\ProvidesPackage{idxlayout}[2010/01/10 v0.4 Configurable index layout]
%    \end{macrocode}
% Besides \textsf{multicol}, we require the packages \textsf{kvoptions}
% (to conveniently specify options as key--value pairs) and
% \textsf{etoolbox} (e.\,g. for length assignments and boolean switch
% handling). We also need \eTeX, whose presence is tested by
% \textsf{etoolbox}.
%    \begin{macrocode}
\RequirePackage{etoolbox,kvoptions,multicol}
%    \end{macrocode}
% We use \texttt{ila@} as a short prefix to internal macros defined by
% \textsf{kvoptions}.
%    \begin{macrocode}
\SetupKeyvalOptions{family=ila,prefix=ila@}
%    \end{macrocode}
% \begin{macro}{\ila@defradiokey}
% \textsf{kvoptions} does not provide ``radio buttons''~-- options that
% take a list of three or more values with associated functions and
% yield an error message if an unknown value is given. However, in a
% series of messages on \textsf{comp.text.tex} \cite{dec09}, Heiko
% Oberdiek (author of \textsf{kvoptions}) and Joseph Wright showed how
% radio button keys can be created using |\define@key| (from the
% \textsf{keyval} package, which is loaded by \textsf{kvoptions}) and
% the \eTeX\ primitive |\ifcsname|. What follows is basically a
% shameless rip-off of Heikos and Josephs good advice.
%
% The command |\ila@defradiokey| takes one optional and two mandatory
% arguments. The first mandatory argument is the key to be defined, the
% second is a ``short key'' which must be used as a second prefix after
% |ila@| when defining the functions associated with each value. The
% optional argument specifies a default value ``which is then used if
% the user does not supply one'' \cite[p. 1002]{Wri09}.
%    \begin{macrocode}
\newcommand*{\ila@defradiokey}[3][]{%
  \define@key{ila}{#2}[#1]{%
    \ifcsname ila@#3@##1\endcsname
      \csname ila@#3@##1\expandafter\endcsname
    \else
      \PackageError{idxlayout}{Unknown value ##1 for option #2}%
    \fi
  }%
}
%    \end{macrocode}
% \end{macro}
% \subsection{Options and commands}
% \begin{macro}{\theidxcols}
% \begin{macro}{\onecolindex}
% \begin{macro}{\twocolindex}
% We define the key \textsf{columns} to control the number of index
% columns and initially set it to 2. (Actually, we use the counter
% |idxcols| to store the number so that anything but an integer will
% yield a \LaTeX\ error message.) If the \mem/ class is used, we check
% the state of its boolean switch |onecolindex| and set \textsf{columns}
% accordingly. We also append code to |\onecolindex| and |\twocolindex|
% so that these \mem/ commands will set \textsf{columns} to the
% respective number.
%    \begin{macrocode}
\newcounter{idxcols}
\define@key{ila}{columns}{\setcounter{idxcols}{#1}}
\setkeys{ila}{columns=2}
\@ifclassloaded{memoir}{%
  \ifbool{onecolindex}{%
    \setkeys{ila}{columns=1}%
  }{%
  }%
  \appto{\onecolindex}{\setkeys{ila}{columns=1}}%
  \appto{\twocolindex}{\setkeys{ila}{columns=2}}%
%    \end{macrocode}
% \end{macro}
% \end{macro}
% \end{macro}
% \begin{macro}{\indexcolsep}
% \begin{macro}{\indexrule}
% If any other class than \mem/ is used, we define the lengths
% |\indexcolsep| and |\indexrule| and set them to appropriate values.
% The keys \textsf{columnsep} and \textsf{rule} will be responsible for
% changing these lengths. We don't set these keys here in order not to
% override any changes carried out before loading \ila/.
%    \begin{macrocode}
}{%
  \newlength{\indexcolsep}%
  \setlength{\indexcolsep}{35\p@}%
  \newlength{\indexrule}%
  \setlength{\indexrule}{\z@}%
}
\define@key{ila}{columnsep}{\setlength{\indexcolsep}{#1}}
\define@key{ila}{rule}{\setlength{\indexrule}{#1}}
%    \end{macrocode}
% \end{macro}
% \end{macro}
% \begin{macro}{\ila@indentunit}
% The key \textsf{indentunit} is also defined and set using
% \textsf{keyval} commands so that its associated length can be used to
% set other lengths.
%    \begin{macrocode}
\newlength{\ila@indentunit}
\define@key{ila}{indentunit}{\setlength{\ila@indentunit}{#1}}
\setkeys{ila}{indentunit=20\p@}
%    \end{macrocode}
% \end{macro}
% \begin{macro}{\ila@hangindent}
% \begin{macro}{\ila@subindent}
% \begin{macro}{\ila@subsubindent}
% We finally use \textsf{kvoptions} to define the keys
% \textsf{hangindent}, \textsf{subindent} and \textsf{subsubindent}.
% Setting their default values is deferred to the definition of the
% functions of the ``radio button'' key \textsf{itemlayout}.
%    \begin{macrocode}
\DeclareStringOption{hangindent}
\DeclareStringOption{subindent}
\DeclareStringOption{subsubindent}
%    \end{macrocode}
% \end{macro}
% \end{macro}
% \end{macro}
% \begin{macro}{\@idxitem}
% |\@idxitem| is only slightly changed: Its hanging indentation is
% controlled by the key \textsf{hangindent} instead of being a fixed
% value.
%    \begin{macrocode}
\renewcommand{\@idxitem}{\par\setlength{\hangindent}{\ila@hangindent}}
%    \end{macrocode}
% \end{macro}
% \begin{macro}{\subitem}
% \begin{macro}{\subsubitem}
% The redefinitions of |\subitem| and |\subsubitem| have to be done
% separately for each permitted value of \textsf{itemlayout}.
% Beforehand, we have to set the values of \textsf{hangindent},
% \textsf{subindent} and \textsf{subsubindent} to appropriate multiples
% of \textsf{indentunit}.
%    \begin{macrocode}
\def\ila@it@abshang{%
  \renewcommand*{\ila@hangindent}{2\ila@indentunit}%
  \renewcommand*{\ila@subindent}{\ila@indentunit}%
  \renewcommand*{\ila@subsubindent}{1.5\ila@indentunit}%
  \renewcommand{\subitem}{\@idxitem\hspace*{\ila@subindent}}%
  \renewcommand{\subsubitem}{\@idxitem\hspace*{\ila@subsubindent}}%
}
%    \end{macrocode}
% \end{macro}
% \end{macro}
% Defining the function of \textsf{relhang} also starts with setting
% various indentation values. |\deflength| from the \textsf{etoolbox}
% package comes in handy for the calculation of the hanging indentations
% of |\subitem| and |\subsubitem|.
%    \begin{macrocode}
\def\ila@it@relhang{%
  \renewcommand*{\ila@hangindent}{1.5\ila@indentunit}%
  \renewcommand*{\ila@subindent}{\ila@indentunit}%
  \renewcommand*{\ila@subsubindent}{2\ila@indentunit}%
  \renewcommand{\subitem}{%
    \par
    \deflength{\hangindent}{\ila@hangindent + \ila@subindent}%
    \hspace*{\ila@subindent}%
  }%
  \renewcommand{\subsubitem}{%
    \par
    \deflength{\hangindent}{\ila@hangindent + \ila@subsubindent}%
    \hspace*{\ila@subsubindent}%
  }%
}
%    \end{macrocode}
% \begin{macro}{\indexsubsdelim}
% For \textsf{singlepar}, only the value of \textsf{hangindent} needs to
% be set. We define |\subitem| and |\subsubitem| as |\unskip| (to remove
% the space generated by the preceding linebreak in the |ind|-file) plus
% |\indexsubsdelim| which stores the delimiter.
%    \begin{macrocode}
\newcommand*{\indexsubsdelim}{; }
\def\ila@it@singlepar{%
  \renewcommand*{\ila@hangindent}{\ila@indentunit}%
  \renewcommand{\subitem}{\unskip\indexsubsdelim}%
  \renewcommand{\subsubitem}{\unskip\indexsubsdelim}%
}
%    \end{macrocode}
% \end{macro}
% At last, we define the ``radio button'' key \textsf{itemlayout}, which
% defaults to \textsf{abshang}.
%    \begin{macrocode}
\ila@defradiokey{itemlayout}{it}
\setkeys{ila}{itemlayout=abshang}
%    \end{macrocode}
% \begin{macro}{\ila@initsep}
% \begin{macro}{\ila@notesep}
% \begin{macro}{\ila@minspace}
% We use \textsf{keyval} commands to define and set the key
% \textsf{initsep}, then \textsf{kvoptions} to define the keys
% \textsf{notesep} and \textsf{minspace}, this time also specifying
% default values.
%    \begin{macrocode}
\newlength{\ila@initsep}
\define@key{ila}{initsep}{\setlength{\ila@initsep}{#1}}
\setkeys{ila}{initsep=10\p@ \@plus 5\p@ \@minus 3\p@}
\DeclareStringOption[\ila@initsep]{notesep}
\DeclareStringOption[80\p@]{minspace}
%    \end{macrocode}
% \end{macro}
% \end{macro}
% \end{macro}
% \begin{macro}{\indexspace}
% The fixed vertical space inserted by |\indexspace| is replaced by the
% value of \textsf{initsep}.
%    \begin{macrocode}
\renewcommand{\indexspace}{\par\vspace{\ila@initsep}}
%    \end{macrocode}
% \end{macro}
% \begin{macro}{\indexfont}
% The ``radio button'' key \textsf{font} produces an appropriate
% definition of |\indexfont|.
%    \begin{macrocode}
\newcommand*{\indexfont}{}
\def\ila@fo@current{\renewcommand*{\indexfont}{}}
\def\ila@fo@normalsize{\renewcommand*{\indexfont}{\normalsize}}
\def\ila@fo@small{\renewcommand*{\indexfont}{\small}}
\def\ila@fo@footnotesize{\renewcommand*{\indexfont}{\footnotesize}}
\ila@defradiokey{font}{fo}
\setkeys{ila}{font=current}
%    \end{macrocode}
% \end{macro}
% \begin{macro}{\indexjustific}
% The ``radio button'' key \textsf{justific} is responsible for defining
% |\indexjustific|. With the value \textsf{standard} selected, we (like
% the \KOMA/-classes) also explicitly set |\parfillskip| to its default
% value of 0\,pt plus 1\,fil. This way, resettings done outside the
% |theindex| environment won't affect the justification of index
% columns. If \textsf{RaggedRight} is chosen without the command of the
% same name being defined, we issue a warning message and use
% |\raggedright| instead.
%    \begin{macrocode}
\newcommand*{\indexjustific}{}
\def\ila@ju@standard{%
  \renewcommand*{\indexjustific}{%
    \setlength{\parindent}{\z@}%
    \setlength{\parfillskip}{\z@ \@plus 1fil}%
  }%
}
\def\ila@ju@raggedright{\renewcommand*{\indexjustific}{\raggedright}}
\def\ila@ju@RaggedRight{%
  \ifundef{\RaggedRight}{%
    \PackageWarning{idxlayout}{%
      Command RaggedRight not defined!\MessageBreak
      I'm using raggedright instead}%
    }%
    \renewcommand*{\indexjustific}{\raggedright}%
  }{%
    \renewcommand*{\indexjustific}{\RaggedRight}%
}
\ila@defradiokey{justific}{ju}
\setkeys{ila}{justific=standard}
%    \end{macrocode}
% \end{macro}
% \begin{macro}{\ila@prenote}
% \begin{macro}{\setindexprenote}
% \begin{macro}{\noindexprenote}
% We use |\setindexprenote| to specify the text of a possible prenote.
% |\ila@prenote| typesets the text within a group (to keep font changes
% local) and inserts the value of \textsf{notesep} as vertical space.
% |\noindexprenote| defines |\ila@prenote| as |\relax| (which also means
% that the control sequence test |\ifundef| will yield \textsf{true}).
%    \begin{macrocode}
\newcommand{\ila@prenote}{}
\newcommand{\setindexprenote}[1]{%
  \def\ila@prenote{%
    \begingroup#1\par\nobreak\endgroup
    \vspace{\ila@notesep}%
  }%
}
\newcommand*{\noindexprenote}{\let\ila@prenote\relax}
\noindexprenote
%    \end{macrocode}
% \end{macro}
% \end{macro}
% \end{macro}
% \subsection{Emulating specific document classes}
%
% \begin{macro}{\ila@classtype}
% We store the type of document class we use, differentiating between
% the \KOMA/-classes (which define |\KOMAClassName|), the \mem/ class
% and all other (notably the standard) classes.
%    \begin{macrocode}
\newcommand*{\ila@classtype}{0}
\@ifclassloaded{memoir}{%
  \def\ila@classtype{2}%
}{%
  \ifundef{\KOMAClassName}{%
  }{%
    \def\ila@classtype{1}%
  }%
}
%    \end{macrocode}
% \end{macro}
% For any but the \KOMA/- and \mem/ classes, we define the boolean
% option \textsf{totoc} which is responsible for including the index in
% the table of contents. If not set, this option defaults to
% \textsf{false}.
%    \begin{macrocode}
\ifcase\ila@classtype\relax
  \DeclareBoolOption{totoc}%
%    \end{macrocode}
% \begin{macro}{\ila@prologue}
% The command |\ila@prologue| comprises actions at the beginning of the
% |theindex| environment that must be tailored to the type of document
% class. For ``other'' classes, the code resembles that of the standard
% classes \textsf{article}, \textsf{book} and \textsf{report}.
%
% Unlike |\twocolumn|, |\begin{multicols}| does not automatically insert
% a pagebreak, so we use |\chapter*| instead of |\@makeschapterhead|.
% With that, we also eliminate the need to set |\thispagestyle{plain}|
% for classes containing the |\chapter| command. (For other classes, we
% don't want the first index page to show a special pagestyle.)
% Furthermore, we take our boolean option \textsf{totoc} into account.
% Note that with version 6.79z of the \textsf{hyperref} package, we can
% do without inserting |\phantomsection| before |\addcontentsline|.
%    \begin{macrocode}
  \def\ila@prologue{%
    \ifundef{\chapter}{%
      \section*{\indexname}%
      \ifbool{ila@totoc}{%
        \addcontentsline{toc}{section}{\indexname}%
      }{%
      }%
    }{%
      \chapter*{\indexname}%
      \ifbool{ila@totoc}{%
        \addcontentsline{toc}{chapter}{\indexname}%
      }{%
      }%
    }%
    \@mkboth{\MakeUppercase\indexname}{\MakeUppercase\indexname}%
  }
%    \end{macrocode}
% \end{macro}
% For the \KOMA/-classes \textsf{scrartcl}, \textsf{scrbook} and
% \textsf{scrreprt}, we create \textsf{totoc} as a pseudo boolean key
% using |\ila@defradiokey|. If not set, this key will respect the
% default behaviour of the class plus any changes carried out before
% loading \ila/.
%    \begin{macrocode}
\or
  \def\ila@tc@true{\KOMAoptions{index=totoc}}%
  \def\ila@tc@false{\KOMAoptions{index=nottotoc}}%
  \ila@defradiokey[true]{totoc}{tc}%
%    \end{macrocode}
% Again, |\ila@prologue| is very much a recoding exercise. Note that the
% \textsf{KOMA-script}-command |\idx@@heading| is responsive to
% |\KOMAoptions| and therefore to our key \textsf{totoc}. For
% \textsf{scrbook} and \textsf{scrreprt}, we only use
% |\setchapterpreamble| if |\index@preamble| is not defined as |\relax|.
% Thus, we avoid excessive vertical space between the index heading and
% the first entry. For \textsf{scrartcl}, we drop the special pagestyle
% of the first index page.
%    \begin{macrocode}
  \def\ila@prologue{%
    \ifundef{\chapter}{%
    }{%
      \ifundef{\index@preamble}{%
      }{%
        \setchapterpreamble{\index@preamble}%
      }%
    }%
    \idx@@heading{\indexname}%
    \@mkboth{\indexname}{\indexname}%
    \ifundef{\chapter}{%
      \index@preamble
    }{%
      \thispagestyle{\indexpagestyle}%
    }%
  }
%    \end{macrocode}
% For the \mem/ class, our pseudo boolean key \textsf{totoc} will also
% respect prior settings.
%    \begin{macrocode}
\or
  \def\ila@tc@true{\boolfalse{noindexintoc}}%
  \def\ila@tc@false{\booltrue{noindexintoc}}%
  \ila@defradiokey[true]{totoc}{tc}%
%    \end{macrocode}
% Another recoding exercise. Note that with \mem/ and its
% \textsf{article} option, |\chapter| resembles |\section|. Again, we
% get rid of special pagestyles, if necessary, and use neither
% |\@makeschapterhead| nor |\phantomsection|.
%    \begin{macrocode}
  \def\ila@prologue{%
    \chapter*{\indexname}%
    \ifbool{noindexintoc}{%
    }{%
      \addcontentsline{toc}{chapter}{\indexname}%
    }%
    \ifbool{artopt}{%
    }{%
      \thispagestyle{indextitlepagestyle}%
    }%
    \indexmark
    \preindexhook
  }
\fi
%    \end{macrocode}
% Having defined the option \textsf{totoc}, we are able to process our
% options.
%    \begin{macrocode}
\ProcessKeyvalOptions*
%    \end{macrocode}
% \begin{macro}{\idxlayout}
% We define |\idxlayout| as a shorthand for |\setkeys{ila}|.
%    \begin{macrocode}
\newcommand*{\idxlayout}[1]{\setkeys{ila}{#1}}
%    \end{macrocode}
% \end{macro}
% \subsection{Redefining the environment \texttt{theindex}}
%
% \begin{environment}{theindex}
% At the beginning of |theindex|, we check if we are in
% \textsf{twocolumn} mode, store the result in |@restonecol| and switch
% to \textsf{onecolumn} mode, if necessary.
%    \begin{macrocode}
\renewenvironment{theindex}{%
  \ifbool{@twocolumn}{%
    \boolfalse{@restonecol}%
    \onecolumn
  }{%
    \booltrue{@restonecol}%
  }%
%    \end{macrocode}
% \end{environment}
% |\multicolsep| is set to 0\,pt, again in order to avoid excessive
% vertical space after the index heading. Also, the \mem/ lengths
% |\indexcolsep| and |\indexrule| (now responsive to the \ila/ options
% \textsf{columnsep} and \textsf{rule}) are put in charge.
%    \begin{macrocode}
  \setlength{\multicolsep}{\z@}%
  \setlength{\columnsep}{\indexcolsep}%
  \setlength{\columnseprule}{\indexrule}%
%    \end{macrocode}
% If a single-column index is requested, we simply execute
% |\ila@prologue|, switch to |\indexfont| and typeset a possible
% prenote. In case of two or more columns, we do all this inside the
% first optional argument of a properly chosen |multicols| environment
% and specify the value of \textsf{minspace} as its second optional
% argument.
%    \begin{macrocode}
  \ifnumcomp{\theidxcols}{<}{\tw@}{%
    \ila@prologue\indexfont\ila@prenote
  }{%
    \begin{multicols}{\theidxcols}%
        [\ila@prologue\indexfont\ila@prenote][\ila@minspace]%
  }%
%    \end{macrocode}
% We set |\parskip| to 0\,pt plus 0.3\,pt (exactly as in the standard
% classes), switch to the proper justification and~-- last, but not
% least~-- redefine |\item|.
%    \begin{macrocode}
  \setlength{\parskip}{\z@ \@plus 0.3\p@}%
  \indexjustific
  \let\item\@idxitem
%    \end{macrocode}
% At the end of |theindex|, we close a possible |multicols| environment
% and switch back to \textsf{twocolumn} mode, if necessary.
%    \begin{macrocode}
}{%
  \ifnumcomp{\theidxcols}{<}{\tw@}{%
  }{%
    \end{multicols}%
  }%
  \ifbool{@restonecol}{%
  }{%
    \twocolumn
  }%
}
%    \end{macrocode}
% The end of the package.
%    \begin{macrocode}
\endinput
%    \end{macrocode}
%
% \Finale
\endinput
