% \iffalse
% !TEX encoding = UTF-8 Unicode
%<*internal>
\begingroup
\input docstrip.tex
\keepsilent
\preamble

  Copyright (C)  2020 Claudio Beccari all rights reserved.
  License information appended
  
\endpreamble

\postamble

Distributable under the LaTeX Project Public License,
version 1.3c or higher (your choice). The latest version of
this license is at: http://www.latex-project.org/lppl.txt

This work is "maintained"

This work consists of files:
1) euclideangeometry.dtx, and the derived files euclideangeometry.sty 
                          and euclideangeometry.pdf,
2) euclideangeometry-man.tex and the derived file euclideangeometry-man.pdf,
3) the auxiliary derived file README.txt 

\endpostamble
\askforoverwritefalse

\generate{\file{euclideangeometry.sty}{\from{euclideangeometry.dtx}{package}}}
\generate{\file{README.txt}{\from{euclideangeometry.dtx}{readme}}}

\def\tmpa{plain}
\ifx\tmpa\fmtname\endgroup\expandafter\bye\fi
\endgroup
%</internal>
% \fi
%
% \iffalse
%<*driver>
\ProvidesFile{euclideangeometry.dtx}%
%</driver>
%<package>\NeedsTeXFormat{LaTeX2e}[2019/01/01]
%<package>\ProvidesPackage{euclideangeometry}%
%<readme>File README.txt for package euclideangeometry
%<*package|readme>
        [2020-04-15 v.0.1.8 Extension package for curve2e]
%</package|readme>
%<*driver>
\documentclass{ltxdoc}\errorcontextlines=100
\hfuzz 10pt
\usepackage[utf8]{inputenc}
\usepackage{lmodern,textcomp}
\usepackage{mflogo}
\usepackage{multicol,amsmath,fancyvrb,graphicx,verbatim}
\usepackage{etoolbox,enumitem,xspace,xcolor,euclideangeometry}
\providecommand*\diff{\mathop{}\!\mathrm{d}}
\providecommand\file{}
\renewcommand*\file[1]{{\normalfont\texttt{#1}}}
\providecommand\prog{}
\renewcommand*\prog[1]{{\normalfont\texttt{#1}}}
\newcommand*\conta[1]{\texttt{\slshape#1}}
\providecommand\cs{}
\renewcommand\cs[1]{{\normalfont\texttt{\char92#1}}}
\renewcommand\meta[1]{{\normalfont\textlangle\textit{#1}\textrangle}}
\renewcommand\marg[1]{\texttt{\{\meta{#1}\}}}
\providecommand\Marg{}
\renewcommand*\Marg[1]{\texttt{\{#1\}}}
\providecommand\oarg{}
\renewcommand*\oarg[1]{\texttt{[\meta{#1}]}}
\providecommand\Oarg{}
\renewcommand*\Oarg[1]{\texttt{[#1]}}
\providecommand\aarg{}
\renewcommand*\aarg[1]{\texttt{<\meta{#1}>}}
\providecommand\Aarg{}
\renewcommand*\Aarg[1]{\texttt{<#1>}}
\providecommand\parg{}
\renewcommand*\parg[1]{\texttt{(\meta{#1})}}
\providecommand\Parg{}
\renewcommand*\Parg[1]{\texttt{(#1)}}
\providecommand\pack{}
\renewcommand*\pack[1]{{\textsf{#1}}}
\providecommand\opt{}
\renewcommand*\opt[1]{{\normalfont\textsl{#1}}}\let\opz\opt
\providecommand\env{}
\renewcommand*\env[1]{{\normalfont\textit{\bfseries#1}}}\let\amb\env

\providecommand\TB{\mbox{\normalfont\slshape TUGboat}\xspace}

\definecolor{verdeguit}{rgb}{0, 0.40, 0}
\def\GuIT{\mbox{\color{verdeguit}\def\I{\textcolor{black}{I}}%
  \fontfamily{lmr}\fontseries{m}\fontshape{sc}\selectfont
g\raisebox{-0.715ex}{\kern-0.26em u}\kern-0.13em\I\kern-0.14em t}\xspace}
\RequirePackage{etoolbox}
\makeatletter
\AfterEndPreamble{%
\DeclareRobustCommand{\TeX}{T\kern-.1667em
  \lower.5ex\hbox{E}\kern-.125emX\@\xspace}
\DeclareRobustCommand{\LaTeX}{L\kern-.36em%
  {\sbox\z@ T%
   \vbox to\ht\z@{\hbox{\check@mathfonts
                        \fontsize\sf@size\z@
                        \math@fontsfalse\selectfont
                        A}%
                  \vss}%
  }%
  \kern-.15em%
  \TeX}}
\makeatother
\DeclareRobustCommand*\TeXLive{\TeX\ Live\xspace}
\DeclareRobustCommand*\MikTeX{Mik\TeX}
\DeclareRobustCommand*\MacTeX{Mac\TeX}
\DeclareRobustCommand*\pdfLaTeX{pdf\/\LaTeX}
\DeclareRobustCommand*\LuaLaTeX{Lua\LaTeX}
\DeclareRobustCommand*\XeLaTeX{X\ifdim\fontdimen1\font=0pt\kern-0.15em\fi
\lower.5ex\hbox{\rotatebox[origin=c]{180}{E}}%
\ifdim\fontdimen1\font=0pt\kern-0.15em\else\kern-0.275em\fi
\LaTeX}
\DeclareRobustCommand*\TikZ{Ti\emph{k}Z\xspace}

\newenvironment{ttsintassi}{\begin{lrbox}{0}
\minipage{\dimexpr\linewidth-2\fboxrule-2\fboxsep}\ttfamily\obeylines}%
{\endminipage\end{lrbox}\center\fbox{\box0}\endcenter}
\let\ttsyntax\ttsintassi \let\endttsyntax\endttsintassi

\unless\ifcsname Gr@phGrid\endcsname
\let\originalGraphGrid\GraphGrid
\RenewDocumentCommand\GraphGrid{r() d()}{%
\IfValueTF{#2}{\put(#1){\originalGraphGrid(#2)}}%
              {\put(0,0){\originalGraphGrid(#1)}}}\fi

\begin{document}\errorcontextlines=100
\GetFileInfo{euclideangeometry.dtx}
\title{The \textsf{euclideangeometry} package}
\author{Claudio Beccari\\[1ex]\texttt{claudio dot beccari at gmail dot com}}
\date{Version \fileversion~--~Last revised \filedate.}
\maketitle
\columnseprule=0.4pt
\begin{multicols}{2}
 \tableofcontents
 \end{multicols}
 \DocInput{euclideangeometry.dtx}
\end{document}
%</driver>
% \fi
%^^A%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%
% \section*{Preface}
%^^A%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%
%
% This file contains the documented code of \pack{euclideangeometry}.
% The user manual source file \file{euclideangeometry-man.tex} and the
% readable document is \file{euclideangeometry.pdf}; it should already be
% installed with your updated  complete \TeX system installation.

% Please refer to the user manual before using this package.
% \CheckSum{1296}
%^^A%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%
%\StopEventually{}
%^^A%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%
%
%\iffalse
%<*package>
%\fi
%^^A%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%
% \section{The code}
%^^A%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%
%
%^^A%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%
% \subsection{Checking the date of a sufficiently recent \texttt{curve2e}
% package}
%^^A%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%
% This package has been already identified by the commands extracted
% by the |docstrip| package, during  the |.dtx| file compilation.
% In any case, if the test checks that the |curve2e| file date is too old;
% it warns the user with an emphasised error message on the console,
% loading this |euclideangeometry| package is stopped and the whole
% job aborts. The emphasised error message appears like this:
%\begin{flushleft}\ttfamily\obeylines
%*************************************************************
%Package curve2e too old
%Be sure that your TeX installation is complete and up to date
%*************************************************************
%Input of euclideangeometry is stopped and job aborted
%*************************************************************
%\end{flushleft}
% This message should be sufficiently strong in order to avoid using
% this package with a vintage version of \TeXLive or \MikTeX. 
%    \begin{macrocode}
\RequirePackage{curve2e}
\@ifpackagelater{curve2e}{2020/01/18}{}%
 {%
  \typeout{*************************************************************}
  \typeout{Package curve2e too old}
  \typeout{Be sure that your TeX installation is complete and up to date}
  \typeout{*************************************************************}
  \typeout{Input of euclideangeometry stopped and job aborted}
  \typeout{*************************************************************}
  \@@end
 }%

%    \end{macrocode}  
%^^A%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%
%\subsection{Labelling}
%^^A%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%
%
% While doing any graphical geometrical drawing it is necessary to label
% points, lines, angles and other such items. Non measurable labels should
% be in upright sans serif font, according to the ISO regulations, but here
% we are dealing witt point identified by macros the contain their
% (cartesian or polar) coordinates that very often are both labels
% and math variables.
%
% Here we provide a versatile macro that can do several things. Its name
% is |\Pbox| and it produces a box containing the label in math format. By
% default the point label is typeset with the math font variant produced
% by command |\mathsf|, but the macro is sufficiently versatile to allow
% other settings; it accepts several optional arguments, therefore it
% syntax is particular:
%\begin{ttsyntax}
%\cs{Pbox}\parg{coordinates}\oarg{alignment}\marg{label}\oarg{diameter}\meta{$\star$}\aarg{angle}
%\end{ttsyntax}
% where \meta{coordinates} are the coordinates where to possibly set a
% black dot with the specified \meta{diameter}; in any case it is the
% reference point of the \meta{label}; the \meta{alignment} is formed by
% the usual letters \texttt{t, b, c, l, r} that can be paired in a
% coherent way (for example the couple \texttt{tb} is evidently
% incoherent, as well as \texttt{lr}), but in absence of this optional
% specification, the couple \texttt{cc} is assumed; most often than
% not, the label position becomes such that when the user reviews the
% document drafts, s/he understands immediately that s/he forgot to specify
% some reasonable \meta{alignment} codes; in any case the \texttt{cc} code
% works fine to just put the dot of a specified diameter but with an empty
% label. Think of the \meta{alignment}
% letters as the position of the reference point with respect to the
% the \meta{label} optical center. The optional \meta{angle} argument
% produces a rotation of the whole label by that angle; it may be used
% in several circumstances, especially when the label is just text, to
% produce, for example,  a sideways legend. It is useful also when the
% labels are produced within a rotated box, in order to counterrotate them.
% 
% The optional asterisk draws a frame around the \emph{label}. Notice that
% the separator between the visible or the invisible frame and the box
% contents varies according the the fact that the \meta{alignment}
% specification contains just one or two letter codes; this is useful,
% because the diagonal position of the label should be optically equal
% to the gap that exists between the reference point and the \meta{label}
% box.
%
% If the \meta{diameter} is zero, no dot is drawn, the whole \meta{label}
% is typeset with the |\mathit| math font; otherwise only the first symbol
% of a math expression is typeset in sans serif. The presence of subscripts
% makes the labels appear more distant from their reference point; the same
% is true when math symbols, even without subscripts, are used, because
% of the oblique nature of the math ‘letters’ alphabet.
% 
% If some text has to be printed as a label, it suffices to surround it
% with  dollar signs, that switch back to text mode when the default mode
% is the math one. With this kind of textual labels it might be convenient
% to use the optional asterisk to frame the text.
% The final optional argument \meta{angle} (to be delimited with the
% \texttt{<~>} signs) specifies the inclination of the label with respect
% to the horizontal line; it is useful, for example to set a label along
% a sloping line.
%    \begin{macrocode}
\providecommand\Pbox{}
\newlength\PbDim
\RenewDocumentCommand\Pbox{D(){0,0} O{cc} m O{0.5ex} s D<>{0}}{%
\put(#1){\rotatebox{#6}{\makebox(0,0){%
\settowidth\PbDim{#2}%
\edef\Rapp{\fpeval{\PbDim/{1ex}}}%
\fptest{\Rapp > 1.5}{\fboxsep=0.5ex}{\fboxsep=0.75ex}%
\IfBooleanTF{#5}{\fboxrule=0.4pt}{\fboxrule=0pt}%
\fptest{#4 = 0sp}%
  {\makebox(0,0)[#2]{\fbox{$\relax#3\relax$}}}%
  {\edef\Diam{\fpeval{(#4)/\unitlength}}%
   \makebox(0,0){\circle*{\Diam}}%
   \makebox(0,0)[#2]{\fbox{$\relax\mathsf#3\relax$}}%
  }}}%
}\ignorespaces}
%    \end{macrocode}
% The following command, to be used always within a group, or a
% environment or inside a box, works only with piecewise continuously
% scalable font collection, such as, for example, the Latin Modern
% fonts, or with continuously scalable fonts, such as, for example,
% the Times ones. They let the operator select, for the scope of the
% command ,any size, even fractional so as to fine adjust the text
% width in the space allowed for it; it is particularly useful with
% the monospaced fonts, that forbid hyphenation, and therefore cannot
% be adjusted to the current line width.
%    \begin{macrocode}
\DeclareRobustCommand\setfontsize[2][1.2]{%
  \linespread{#1}\fontsize{#2}{#2}\selectfont}
%    \end{macrocode}
% With OpenType fonts there should not be any problems even with math
% fonts; with Type~1 fonts the only scalable fonts I know of, are the
% LibertinusMath fonts, usable through the LibertinusT1math package, are
% also the only ones that have 8~bit encoded math fonts (256
% glyph fonts), while the standard default Type~1 math fonts are just
% 7~bit encoded (128 glyphs fonts).
%
% Another useful labelling command is |Zbox|; this command is an
% evolution of a command that I been using for years in several
% documents of mine. It uses some general text, not necessarily
% connected to a particular point of the |picture| environment,
% as a legend; It can draw short text as a simple horizontal box,
% and longer texts as a vertical box of specified width and height
%
% Is syntax is the following:
%\begin{ttsyntax}
%\cs{Zbox}\parg{position}\parg(dimensions)\oarg{alignment}\marg{text}
%\end{ttsyntax}
% where \meta{position} is where the reference point of the box has
% to be put in the picture; \meta{dimensions} are optional; if not
% specified, the  box is a horizontal one, and it is as wide as its
% contents; if it is specified, it must be a comma separated list
% of two integer or fractional numbers that are the width and the
% height of the box; if the height is specified as zero, the width
% specifies a horizontal box of that width; \meta{alignment} is optional
% and is formed by one or two coherent letter codes from the usual set
% \texttt{t, b, c, l, r}; if the \meta{alignment} is absent, the
% default alignment letters are \texttt{bl}, i.e. the box reference
% point is the bottom left corner; \meta{text} contains general text,
% even containing some math.
%    \begin{macrocode}

\def\EUGsplitArgs(#1,#2)#3#4{\edef#3{#1}\edef#4{#2}}
\newlength\EUGZbox
\providecommand\Zbox{}
\RenewDocumentCommand\Zbox{r() D(){0,0} O{bl} m}{%
\EUGsplitArgs(#2)\ZboxX\ZboxY % splits box dimensions
\fboxsep=2\unitlength
\ifnum\ZboxX=\z@
  \def\ZTesto{\fbox{#4}}%
\else
  \ifnum\ZboxY=\z@
    \def\ZTesto{\fbox{\parbox{\ZboxX\unitlength}{#4}}}%
  \else
    \def\ZTesto{%
    \setbox\EUGZbox=\hbox{\fbox{%
         \parbox[c][\ZboxY\unitlength][c]{\ZboxX\unitlength}{#4}}}%
      \dimen\EUGZbox=\dimexpr(\ht\EUGZbox +\dp\EUGZbox)/2\relax
      \ht\EUGZbox=\dimen\EUGZbox\relax 
      \dp\EUGZbox=\dimen\EUGZbox\relax
      \box\EUGZbox%
      }%
  \fi
\fi
\put(#1){\makebox(0,0)[#3]{\ZTesto}}\ignorespaces}
%    \end{macrocode}

%^^A%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%
% \subsection{Service macros for ellipses}
%^^A%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%
% The |\ellisse| has a control sequence name in Italian; it differs for
% just one letter from the name |ellipse| English name, but we cannot use
% the latter one because it may conflict with other packages loaded by
% the user; actually this command and the next one are just  shortcuts 
% for executing more general commands with specific sets of arguments.
% For details and syntax, please refer yourself to
% section~\ref{ssec:ellissi}
%    \begin{macrocode}

\NewDocumentCommand\ellisse{ s m m}{%
\IfBooleanTF{#1}%
  {\let\fillstroke\fillpath}%
  {\let\fillstroke\strokepath}%
\Sellisse{#2}{#3}%
}

\NewDocumentCommand\Xellisse{ s D(){0,0} O{0} m m O{} o}{%
\IfBooleanTF{#1}%
  {\XSellisse*(#2)[#3]{#4}{#5}[#6][#7]}%
  {\XSellisse(#2)[#3]{#4}{#5}[#6][#7]}%
}
%    \end{macrocode}
%
% We do not know if the following macro |\polyvector| may be useful for
% euclidean geometry constructions, but it may be useful in block
% diagrams; it is simply a polyline where the last segment is a geometrical
% vector. As in polyline the number of recursions is done until the last
% specified coordinate pair; recognising that it is the last one, instead
% of drawing a segment, the macro draws a vector.
%
%    \begin{macrocode}

\def\polyvector(#1){\roundcap\def\EUGpreviouspoint{#1}\EUGpolyvector}
\def\EUGpolyvector(#1){%
\@ifnextchar({%
    \segment(\EUGpreviouspoint)(#1)\def\EUGpreviouspoint{#1}\EUGpolyvector}%
  {\VECTOR(\EUGpreviouspoint)(#1)}%
}
%    \end{macrocode}
%^^A%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%
% \subsection{Processing lines and segments}
%^^A%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%
%
% The next macros are functional for the geometric constructions we are
% going to make: finding the intersection of lines or segments,
% finding the lengths and arguments of segments, directions, distances,
% distance of a point from a line or a segment, the symmetrical
% point of a another one specified with respect to a given center of
% symmetry; the axes of segments, the solutions of the relationship
% between the semi axes of an ellipse and the semi focal distance,
% and so on.
%
% Most of these commands have delimited arguments; the delimiters
% may be the usual parentheses, but they may be keywords; many
% commands contain  the keyword \texttt{to}, not necessarily the
% last one; the arguments before such keyword may be entered as
% ordered comma separated numerical couples, or comma separated
% macros the containing scalar values; or they may be macros that
% contain the ordered couples representing vectors or directions;
% they all may be in cartesian or polar form. Remember that such
% ordered couples are complex numbers, representable by
% vectors applied to the origin of the axes; therefore sometimes it is
% necessary that the underlying commands execute some vector
% differences so as to work with generic vectors.
%
% On the opposite the output values, i.e. the argument after that
% \texttt{to} keyword, should be tokens that can receive a definition,
% in general macros, to which the user should assign a mnemonic name;
% s/he should use such macros for further computations or for drawing
% commands.
%
% The first and principal command is |\IntersectionOfLines| and
% it has the following syntax:
%\begin{ttsyntax}
%\cs{IntersectionOfLines}\parg{point1}\parg{dir1}and\parg{point2}\parg{dir2}to\meta{crossing}
%\end{ttsyntax}
% where \meta{point1} and \meta{dir1} are respectively a point of the
% first line and its \emph{direction}, not a second point, but the
% \emph{direction} — it is important to stress this point; similarly
% for the second line; the output is stored in
% the macro that identifies the \meta{crossing} point. The directions
% do not need to be expressed with unit vectors, but the lines must not
% be parallel or anti parallel (equal directions or differing by
% $180^\circ$); the macro contains a test that checks this anomalous
% situation because an intersection at infinity or too far away
% ($2^{14}-1$ typographical points, approximately 5,758\,m) is of no
% interest; in case, no warning message is issued, the result is
% put to \texttt{0,0}, and the remaining computations become nonsense.
% It is a very unusual situation and I never encountered~it;
% nevertheless\dots

%    \begin{macrocode}

\def\IntersectionOfLines(#1)(#2)and(#3)(#4)to#5{\bgroup
\def\IntPu{#1}\def\Uu{#2}\def\IntPd{#3}\def\Ud{#4}%
 \DirOfVect\Uu to\Du 
 \DirOfVect\Ud to\Dd 
 \XpartOfVect\Du to \a  \YpartOfVect\Du to \b 
 \XpartOfVect\Dd to \c  \YpartOfVect\Dd to \d 
 \XpartOfVect\IntPu to \xu \YpartOfVect\IntPu to \yu 
 \XpartOfVect\IntPd to \xd \YpartOfVect\IntPd to \yd 
 \edef\Den{\fpeval{-(\a*\d-\b*\c)}}%
 \fptest{abs(\Den)<1e-5}{% Almost vanishing determinant
   \def#5{0,0}%
 }{% Determinant OK
   \edef\Numx{\fpeval{(\c*(\b*\xu-\a*\yu)-\a*(\d*\xd-\c*\yd))/\Den}}%
   \edef\Numy{\fpeval{(\d*(\b*\xu-\a*\yu)-\b*(\d*\xd-\c*\yd))/\Den}}%
   \CopyVect\Numx,\Numy to\Paux
   \edef\x{\egroup\noexpand\edef\noexpand#5{\Paux}}\x\ignorespaces}}
%    \end{macrocode}
%
% The |IntersectionOfSegments| macro is similar but in input it
% contains the end points of two segments: internally it uses
% |\IntersectionOfLines| and to do so it has to determine the
% directions of both segments. The syntax is the following:
%\begin{ttsyntax}
%\cs{IntersectionOfSegments}\parg{point11}\parg{point12}and\parg{point21}\parg{point22}
%\qquad to\meta{crossing}
%\end{ttsyntax}
% The \meta{crossing} point might fall outside one or both segments.
% It is up to the users to find out if the result is meaningful
% or nonsense. Two non parallel lines are infinitely long in both
% directions and any \meta{crossing} point is acceptable; with
% segments the situation might become nonsense.
%    \begin{macrocode}

\def\IntersectionOfSegments(#1)(#2)and(#3)(#4)to#5{%
\SubVect#1from#2to\IoSvectu \DirOfVect\IoSvectu to\DirIoSVecu
\SubVect#3from#4to\IoSvectd \DirOfVect\IoSvectd to\DirIoSVecd
\IntersectionOfLines(#1)(\DirIoSVecu)and(#3)(\DirIoSVecd)to#5\ignorespaces}
%    \end{macrocode}
%
% An application of the above intersections is formed by the next
% two macros; they find the axes of a couple of sides of a triangle
% and use their base point and direction to identify two lines the
% intersection of which is the circumcenter; the distance of one
% base point from the circumcenter is the radius of the circumcircle
% that can be drawn  with the usual macros. We have to describe
% the macros |\AxisOf| and |CircleWithCenter| and we will do it in
% a little while. Meanwhile the syntax of the whole macro is the
% following:
%\begin{ttsyntax}
%\cs{ThreePointCircle}\meta{$\star$}\parg{vetex1}\parg{vertex2}\parg{vertex3}
%\end{ttsyntax}
% where the three vertices are the three points where the circle
% must pass, but they identify also a triangle. Its side axes
% intersect in one point that by construction is at the same
% distance from the three vertices, therefore it is the center of
% the circle that passes through the three vertices. A sub product
% of the computations is the macro |\C| that contains the center
% coordinates. If the optional asterisk is used the whole drawing
% is executed, while if it is missing, only the |\C| macro remains
% available but the user is responsible to save/copy its value
% into another macro; for this reason another macro should be more
% easy to use; its syntax is the following: 
%\begin{ttsyntax}
%\cs{ThreePointCircleCenter}\parg{vetex1}\parg{vertex2}\parg{vertex3}
%\qquad to\meta{center}
%\end{ttsyntax}
% where the vertices have the same meaning, but\meta{center} is
% the user chosen macro that contains the center coordinates.
%
%    \begin{macrocode}

\NewDocumentCommand\ThreePointCircle{s r() r() r()}{%
\AxisOf#2and#3to\Mu\Du \AxisOf#2and#4to\Md\Dd
\IntersectionOfLines(\Mu)(\Du)and(\Md)(\Dd)to\C
\SubVect#2from\C to\R 
\IfBooleanTF{#1}{\CircleWithCenter\C Radius\R}{}\ignorespaces}

\NewDocumentCommand\ThreePointCircleCenter{r() r() r() m}{%
\ThreePointCircle(#1)(#2)(#3)\CopyVect\C to#4}
%    \end{macrocode}
%
% There are some useful commands that help creating |picture|
% diagrams in an easier way; for example one of the above described
% commands internally uses |\CircleWithCenter|. It is well known
% that the native |picture| command |\circle| requires the
% specification  of the diameter but many |euclideangeometry|
% commands already get the distance of two points, or the magnitude
% of a segment, or similar objects that may be used as a radius, rather
% than the diameter; why should we not have macros that simultaneously
% compute the require diameter and draw the circle. Here there are two
% such macros; they are similar to one another  but their names differ in
% capitalisation, but also in the way they use the available input
% information. The syntax is the following:
%\begin{ttsyntax}
%\cs{CircleWithCenter}\meta{center} Radius\meta{Radius}
%\cs{Circlewithcenter}\meta{center} radius\meta{radius}
%\end{ttsyntax}
% where in both cases \meta{center} is a vector/ordered couple
% that points to the circle center. On the contrary \meta{Radius}
% is a vector obtained through previous calculations, while
% \meta{radius} is a scalar containing a previously calculated length.
%    \begin{macrocode}
\def\CircleWithCenter#1Radius#2{\put(#1){\ModOfVect#2to\CWR
\circle{\fpeval{2*\CWR}}}\ignorespaces}
% 
\def\Circlewithcenter#1radius#2{\put(#1){\circle{\fpeval{2*abs(#2)}}}%
\ignorespaces}
%    \end{macrocode}
%
% As announced, here we have a macro to compute the axis of a segment;
% given two points $P_1$ and $P_2$, for example the end points of a
% segment, or better the end point of the vector that goes from
% $P_1$ to $P_2$, the macro determines the segment middle point and
% a second point the lays on the perpendicular at a distance equal to half
% the first two points distance; this second point lays at the left of
% vector $P_2-P_1$, therefore it is important to select the right initial
% vector, in order to have the second axis point on the desired side.
%\begin{ttsyntax}
%\cs{AxisOf}\meta{P1} and\meta{P2} to\meta{Axis1}\meta{Axis2}
%\end{ttsyntax}
% Macros |\SegmentCenter| and |\MiddlePointOf| are alias of one another;
% their syntax is:
%\begin{ttsyntax}
%\cs{SegmentCenter}\parg{P1}\parg{P2}to\meta{center}
%\cs{MiddlePointOf}\parg{P1}\parg{P2}to\meta{center}
%\end{ttsyntax}
% \meta{P1}, \meta{p2} and \meta{center} are all vectors.
%    \begin{macrocode}

\def\AxisOf#1and#2to#3#4{%
\SubVect#1from#2to\Base \ScaleVect\Base by0.5to\Base
\AddVect\Base and#1to#3 \MultVect\Base by0,1to#4}

\def\SegmentCenter(#1)(#2)to#3{\AddVect#1and#2to\Segm
\ScaleVect\Segm by0.5to#3\ignorespaces}

\let\MiddlePointOf\SegmentCenter
%    \end{macrocode}
%
% Some other macros are needed to solve certain triangle problems;
% one of such macros is the one allows to determine the length of one
% leg of a right triangle by knowing the lengths of the hypothenuse
% and the other leg. The syntax is the following:
%\begin{ttsyntax}
%\cs{LegFromHypotenuse}\meta{hypothenuse} AndOtherLeg\meta{leg1} to\meta{leg2}
%\end{ttsyntax}
% where the three parameters may be macros, especially the last one;
% all of them contina scalar values.
%
%    \begin{macrocode}
\def\LegFromHypotenuse#1AndOtherLeg#2to#3{%
  \edef#3{\fpeval{sqrt(#1**2-#2**2)}}}
%    \end{macrocode}
%
% Another useful macro determines the two intersections of a line with
% a circumference if they exist; otherwise it issues a warning and sets
% both output values to vector \texttt{0,0}, which, of course, is wrong,
% but it allows to go on with typesetting, although with non sense results.
% Warnings do not stop the compilation program, therefore their message
% goes to the \file{.log} file and the user might not notice it; but
% since the results are probably absurd, s/he certainly notices this
% fact and looks for messages; the user, therefore, who has carefully
% read  this user manual, immediately looks onto the \file{.log} file
% and realises the reason of the wrong results. A similar approach
% is used for the macro that determines the intersection of two circles;
% see below 
% The syntax of this macro is the following:
%\begin{ttsyntax}
%\cs{IntersectionsOfLine}\parg{point}\parg{direction} WithCircle\parg{center}\marg{radius} to\meta{int1} and\meta{int2}
%\end{ttsyntax}
% where \meta{point} and \meta{direction} are the line parameters
% that can be explicit complex values or macros; \meta{center} is
% the circumference explicit complex value, or a macro, containing
% the center coordinates; \meta{radius} is the scalar explicit or
% macro radius length; The intersection points \meta{int1} and
% \meta{ind2} are supposed to be macros that get defined with the
% intersection point coordinates; \meta{int1} is the first intersection
% that is determined along the line \emph{direction}. Please notice the
% different first part of the macro name \texttt{IntersectionsOfLine}
% compared to the macro that determines the intersection of two lines
% \texttt{IntersectionOfLines}: two intersections and one line vs. one
% intersection with two lines.
%    \begin{macrocode}
\def\IntersectionsOfLine(#1)(#2)WithCircle(#3)#4to#5and#6{%
\CopyVect#3 to\C \edef\R{#4}
\CopyVect#1to\Pu \CopyVect#2to\Pd
\Circlewithcenter\C radius\R
\segment(\Pu)(\Pd)\SegmentArg(\Pu)(\Pd)to\Diru
\edef\Dird{\fpeval{\Diru+90}}\Pbox(\C)[b]{C}[2]
\IntersectionOfLines(\Pu)(\Diru:1)and(\C)(\Dird:1)to\Int 
\SegmentLength(\C)(\Int)to\A
\fptest{\A > \R}{\PackageError{euclideangeometry}%
{Distance of line \A\space larger than radius \R. No intersections}%
{Check your data; correct and retry}}{%
\LegFromHypotenuse\R AndOtherLeg\A to\B
\AddVect\Int and\Diru:-\B to\Pt \edef#5{\Pt}
\SymmetricalPointOf\Pt respect\Int to\Pq \edef#6{\Pq}
}}
%    \end{macrocode}
%
% Another useful macro determines the point \meta{p2} symmetric
% to a given point \meta{p1} with respect to a given segment the
% end points of which are \meta{Segm1} and \meta{Segm2}:
%\begin{ttsyntax}
%\cs{Segment}\parg{Segm1}\parg{Segm2}SymmetricPointOf\marg{p1} to\meta{p2}
%\end{ttsyntax}
% where, as usual, the input data may be explicit or macro defined
% coordinates, while the output result should be a macro name.
%    \begin{macrocode}
\def\Segment(#1)(#2)SymmetricPointOf#3to#4{%
\SegmentArg(#1)(#2)to\Sanguno\edef\Sangdue{\fpeval{\Sanguno+90}}
\IntersectionOfLines(#1)(\Sanguno:1)and(#3)(\Sangdue:1)to\Smed
\SymmetricalPointOf#3respect\Smed to#4\ignorespaces}
%    \end{macrocode}
%
% This useful macro draws a circle given its \meta{center}  and the
% coordinates of the \meta{point}  which the circumference should pass
% through. The syntax is:
%\begin{ttsyntax}
%\cs{CircleThrough}\parg{[point}WithCenter\marg{center}
%\end{ttsyntax}
% As usual, the parameters are all explicit or macro defined complex
% numbers.
%    \begin{macrocode}
\def\CircleThrough#1WithCenter#2{%
\SegmentLength(#1)(#2)to\Radius
\Circlewithcenter#2radius\Radius}
%    \end{macrocode}
% The above macro is the building block for a simple macro that draws
% two circles that cross at a given point; but it is so simple that
% it is not worth defining a macro: if the user wants to try his/her
% ability, s/he may define:
%\begin{flushleft}\obeylines
%|   \NewDocumentCommand{r() r() r()}{%|
%|   \CircleThrough#3 WithCenter{#1}|
%|   \CircleThrough#3 WithCenter{#2}\ignorespaces}|
%\end{flushleft}
% where \cs{ignorespaces} may be superfluous, but is always a safety action
% when defining commands to be used within the \amb{picture} environment.
% In any case see example~15 in \file{euclideangeometry-man.pdf}
%^^A\ref{fig:two-intersecting-circles}.
% 
% If it is necessary to find the intersections of two circles that
% do not share a previously known point; we can use the following
% macro. Analytically given the equations of two circumferences,
% it is necessary to solve a system of two second degree equations
% the processing of which ends up with a second degree polynomial
% that might have real roots (the coordinates of the intersection
% points), or two coincident roots (the circles are tangent), or
% complex roots (the circles do not intersect), or they may be
% indefinite (the two circles heve the same center and the same
% radii). Let us exclude the last case, although it would be trivial
% to create the macro with a test that controls such situation. But
% even the analysis of the discriminant of the second degree equation
% requires a complicated code.
% 
% On the opposite a simple drawing of the two circles, with centers
% $C_1$ and $C_2$ and radii $R_1$ and $R_2$, with the centers distance
% of $ a= |C_1-C_2|$, allows to understand that in order to have
% intersections: $(\alpha)$ if $a\leq \max(R_1,R_2)$ (the center
% of a circle is contained within the other one) then it must be
% $ a \geq |R_1 - R_2|$, where the ‘equals’ sign applies when the
% circles are internally tangent; $(\beta)$ otherwise 
% $a \geq \max(R_1,R_2)$  and it must be $a \leq R_1+R_2$ , where
% the ‘equals’ sign applies when the circles are externally tangent.
% In conclusion in any case il the range $|R_1-R_2|\leq a\leq R_1+R_2$
% is where the two circles intersect, while outside this distance
% range the circles do not intersect.
% 
% For simplicity let us assume that $R_1 \geq R_2$; the macro can
% receive the circle data in any order, but the macro very easily
% switches their data so that circle number~1 is the one with larger
% radius. If the distance $a$ is outside the allowed range, there
% are no intersections, therefore a warning message is output and the
% intersection point coordinates are both set to \texttt{0,0}, so that
% processing continues with non sense data; the remaining geometric
% construction based on such intersection points might continue with
% other error messages or to absurd results; a string message to the
% user who, having read the documentation, understand the problem and
% provides for.
%
% The new macro has the following syntax:
%\begin{ttsyntax}
%\cs{TwoCirclesIntersections}\parg{C1}\parg{C2}withradii\marg{R1} and\marg{R2} to\meta{P1} and\meta{P2}
%\end{ttsyntax}
% where the symbols in input may be macros or explicit numerical
% values; the output point coordinates \meta{P1} and \meta{P2}
% should be definable single tokens, therefore the surrounding
% braces are not necessary.
%    \begin{macrocode}
\def\TwoCirclesIntersections(#1)(#2)withradii#3and#4to#5and#6{%
  \fptest{#3 >=#4}{%
  \edef\Cuno{#1}\edef\Cdue{#2}%
  \edef\Runo{#3}\edef\Rdue{#4}%
  }{%
  \edef\Cdue{#2}\edef\Cuno{#2}%
  \edef\Rdue{#3}\edef\Runo{#4}%
  }
%    \end{macrocode}
% Above we switched the circle data so as to be sure that symbols relating
% to circle ‘one’ refer to the circle with larger (or equal) radius.
% Now we define the centers distance in macro \cs{A}; the test if \cs{A}
% lays in the correct range, otherwise we output a warning message.
%    \begin{macrocode}
  \SegmentLength(\Cuno)(\Cdue)to\A
  \edef\TCIdiffR{\fpeval{\Runo-\Rdue}}\edef\TCIsumR{\fpeval{\Runo+\Rdue}}
  \fptest{\TCIdiffR > \A || \A > \TCIsumR}{%
  \edef#5{0,0}\edef#6{0,0}% Valori assurdi se i cerchi non si intersecano
  \PackageWarning{TestFP}{%
  ***********************************\MessageBreak
  Circles do not intersect           \MessageBreak
  Check centers and radii and retry  \MessageBreak
  Both intersection point are set to \MessageBreak
  (0,0) therefore expect errors      \MessageBreak
  ***********************************\MessageBreak}%
  }{% 
%    \end{macrocode}
% Here we are within the correct range and we proceed with the
% calculations. We take as a temporary  reference the segment
% that joins the centers. The common chord that joins the
% intersection points is perpendicular to such a segment crossing
% it by a distance  $c$ form $C_1$, and, therefore by a distance
% $a-c$ from $C_2$; this chord forms two isosceles triangles with the
% centers; the above segment bisects such triangles, forming four right
% triangles; their hypotenuses equal the radii of the respective
% circles; their bases $h$ are all equal to half the chord; Pythagoras'
% theorem allows us to write:
%\[
%\left\{
% \begin{aligned}
% h^2 &= R_1^2 - c^2\\
% h^2 &= R_2^2 - (a-c)^2
% \end{aligned}
%\right.
%\]
% Solving for $c$, we get:
%\[\left\{
%\begin{aligned}
%c &= \frac{R_1^2 - R_2^2 + a^2 }{2a}\\
%h &= \sqrt{R_1^2 -c^2}
%\end{aligned}
%\right.
%\]
%    \begin{macrocode}
    \SegmentArg(\Cuno)(\Cdue)to\Acompl
        \SubVect\Cuno from\Cdue to \Cdue
        \edef\CI{\fpeval{(\Runo^2 - \Rdue^2 +\A^2)/(2*\A)}}
        \edef\H{\fpeval{sqrt(\Runo^2 - \CI^2)}}
        \CopyVect\CI,-\H to\Puno
        \CopyVect\CI,\H to\Pdue
%    \end{macrocode}
% Now we do not need anymore the chord intersection distance \cs{CI}
% any more, so we can use for other tasks, and we create a vector with
% absolute coordinates; We then add the rotated vector corresponding
% to the base \cs{H} so as to get the absolute chord extrema \cs{PPuno}
% and \cs{PPdue}. 
%    \begin{macrocode}
        \MultVect\CI,0 by\Acompl:1 to\CI
        \AddVect\Cuno and\CI to\CI
        \MultVect\Puno by\Acompl:1 to\PPunorot 
        \AddVect\PPunorot and \Cuno to \PPuno
        \MultVect\Pdue by\Acompl:1 to\PPduerot 
        \AddVect\PPduerot and \Cuno to \PPdue
        \edef#5{\PPuno}\edef#6{\PPdue}%
  }% 
}
%    \end{macrocode}
% It may be noticed that the first intersection point, assigned to
% parameter |#5| is the one found along the orthogonal direction 
% to the vector form $C_1$ to $C_2$, obtained by a rotation of
% $90^\circ$ counterclockwise.
% The whole construction of the geometry described above is shown
% in figure~16 in the user manual \file{euclideangeometry-man.pdf}.
%
%^^A%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%
% \subsection{Triangle special points}
%^^A%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%
% Here we have the macros to find the special points on a triangle
% side that are the “foot” of special lines from one vertex to the
% opposite side. We already described the circumcircle and the
% circumcenter, but that is a separate case, because the circumcenter
% is not the intersection of special lines from one vertex to the
% opposite base. The special lines we are interested in here are
% the height, the median, and the bisector 
% The macros have the same aspect |\Triangle...Base|, where the dots
% are replaced with each of the (capitalised) special line names.
% Their syntaxes are therefore very similar:
%\begin{ttsyntax}
%\cs{TriangleMedianBase}\meta{vertex} on\meta{base1} and\meta{base2} to\meta{M}
%\cs{TriangleHeightBase}\meta{vertex} on\meta{base1} and\meta{base2} to\meta{H}
%\cs{TrinagleBisectorBase}\meta{vertex} on\meta{base1} and\meta{base2} to\meta{B}
%\end{ttsyntax}
% where \meta{vertex} contains one of the vertices coordinates, and
% \meta{base1} and \meta{base2} are the end points of the side
% opposite to that triangle vertex; \meta{M}, meta{H}, and \meta{B}
% are the intersections of these special lines from the \meta{vertex}
% to the opposite side; in order, they are the foot of the median,
% the foot of the height; the foot of the bisector. The construction
% of the median foot \meta{M} is trivial because this foot is the base
% center; the construction of the height foot is a little more
% complicated, because it is necessary to find the exact direction
% of the perpendicular from the vertex to the base in order to
% find the intersection \meta{H}; the construction of the bisector
% base implies finding the exact direction of the two sides starting at the
% \meta{vertex}, and taking the mean direction, which is trivial if
% polar coordinates are used; at this point the bisector line is completely
% determined and the intersection with  the base line \meta{B} is
% easily obtained.
%    \begin{macrocode}

\def\TriangleMedianBase#1on#2and#3to#4{%
\SubVect#1from#2to\TMBu \SubVect#1from#3to\TMBd
\SubVect\TMBu from\TMBd to\Base
\ScaleVect\Base by0.5to\TMBm\AddVect#2and\TMBm to#4\ignorespaces}
%
\def\TriangleHeightBase#1on#2and#3to#4{%
\SubVect#2from#3to\Base
\ArgOfVect\Base to\Ang \CopyVect\fpeval{\Ang+90}:1 to\Perp
\IntersectionOfLines(#1)(\Perp)and(#2)(\Base)to#4\ignorespaces}
%
\def\TriangleBisectorBase#1on#2and#3to#4{%
\SubVect#2from#1to\Luno \SubVect#3from#1to\Ldue
\SubVect#2from#3to\Base
\ArgOfVect\Luno to\Arguno \ArgOfVect\Ldue to\Argdue
\edef\ArgBis{\fpeval{(\Arguno+\Argdue)/2}}%
\CopyVect \ArgBis:1to \Bisect
\IntersectionOfLines(#2)(\Base)and(#1)(\Bisect)to#4\ignorespaces}
%    \end{macrocode}
% Having defined the previous macros, it becomes very easy to create
% the macros to find the\emph{barycenter}, the \emph{orthocenter},
% the\emph{incenter}; for the \emph{circumcenter} and the
% \emph{circumcircle} we have already solved the question with the
% |\ThreePointCircleCenter| and the |ThreePointCircle| macros; for
% homogeneity, we create here their aliases with the same form as
% the new “center”  macros. Actually, for the “circle” macros,
% once the center is known, there is no problem with the circumcircle,
% while for the incircle it suffices a macro to determine the distance
% of the incenter from one of the triangle sides; such a macro is going to
% be defined in a little while; it is more general than simply to
% determine the radius of the incircle.
%    \begin{macrocode}

\let\TriangleCircumcenter\ThreePointCircleCenter
\let\TriangleCircummcircle\ThreePointCircle
%    \end{macrocode}
%
% The other “center” macros are the following; they all consist
% in finding two of the specific triangle lines, and finding their
% intersection. Therefore for the barycenter we intersect two
% median lines; for the orthocenter we intersect two height lines;
% for the incenter we intersect two bisector lines;
%    \begin{macrocode}

\def\TriangleBarycenter(#1)(#2)(#3)to#4{%
\TriangleMedianBase#1on#2and#3to\Pa 
\TriangleMedianBase#2on#3and#1to\Pb
\DistanceAndDirOfVect#1minus\Pa to\ModPa and\AngPa
\DistanceAndDirOfVect#2minus\Pb to\ModPb and\AngPb
\IntersectionOfLines(#1)(\AngPa)and(#2)(\AngPb)to#4}

\def\TriangleOrthocenter(#1)(#2)(#3)to#4{%
\TriangleHeightBase#1on#2and#3to\Pa 
\TriangleHeightBase#2on#3and#1to\Pb 
\DistanceAndDirOfVect#1minus\Pa to\ModPa and\AngPa
\DistanceAndDirOfVect#2minus\Pb to\ModPb and\AngPb
\IntersectionOfLines(#1)(\AngPa)and(#2)(\AngPb)to#4}

\def\TriangleIncenter(#1)(#2)(#3)to#4{%
\TriangleBisectorBase#1on#2and#3to\Pa
\TriangleBisectorBase#2on#3and#1to\Pb
\DistanceAndDirOfVect#1minus\Pa to\ModPa and\AngPa
\DistanceAndDirOfVect#2minus\Pb to\ModPb and\AngPb
\IntersectionOfLines(#1)(\AngPa)and(#2)(\AngPb)to#4}
%    \end{macrocode}
%^^A%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%
%\subsection{Other specific service macros}\label{ssec:ellissi}
%^^A%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%
%
% And here it comes the general macro to determine the distance
% of a point from a segment or from a line that contains that
% segment; it may be used for determining the radius of the
% incenter, but it is going to be used also for other purposes.
% Its syntax is the following:
%\begin{ttsyntax}
%\cs{DistanceOfPoint}\meta{point} from\parg{P1}\parg{P2}to\meta{distance}
%\end{ttsyntax}
% where \meta{point} is a generic point; \meta{P1} and \meta{P2} 
% are a segment end points, or two generic points on a line;
% \meta{distance} is the macro that receives the computed scalar
% distance value.
%    \begin{macrocode}

\def\DistanceOfPoint#1from(#2)(#3)to#4{%
\SubVect#2from#3to\Base \MultVect\Base by0,1to\AB
\IntersectionOfLines(#1)(\AB)and(#2)(\Base)to\D
\SubVect#1from\D to\D
\ModOfVect\D to#4}
%    \end{macrocode}
% The following macros are specific to solve other little geometrical
% problems that arise when creating more complicated constructions.
%
% The |\AxisFromAxisAndFocus| is an unhappy name that describes
% the solution of an ellipse relationship between the ellipse axes
% and the focal distance 
%\begin{equation} a^2 = b^2 + c^2\label{equ:axes-foci}\end{equation}
% This relation exists between the “semi” values, but it works equally
% well with the full values. Evidently $a$ is the largest quantity and
% refers to the main ellipse axis, the one that passes through the two
% foci; $b$ refers to the other shorter ellipse axis and $c$ refers to
% the foci; $b$ and $c$ are smaller than $a$, but there is no specific
% relationship among these two quantities It goes by itself that
% these statements apply to a veritable ellipse, not to a circle,
% that is the special case where $b=a$ and $c=0$.
%
% Since to solve the above equation we have one unknown and two
% known data, but we do not know what they represent, we have to
% assume some relationship exist between the known data; therefore
% if $a$ is known it must be entered as the first macro argument;
% otherwise $a$ is the unknown and the first Argument has to be the
% smaller one among $b$ and $c$. Since $b$ and$c$ may come from other
% computation the user has a dilemma: which is the smaller one?
% But this is a wrong approach; of course if the user knows which is the
% smaller, s/he can use the macro by entering the data in the proper
% order; but the user is determining the main axis, therefore it better
% that s/he uses directly the second macro |\MainAxisFromAxisAndFocus|
% that directly computes $a$ disregarding the order with which $b$
% and $c$ are entered; the macro name suggests to enter $b$ first
% and $c$ second, but it is irrelevant thanks to the sum properties.
% Summarising:
%\begin{itemize}[noitemsep]
%\item if the main axis is known use |\AxisFromAxisAndFocus| by
% entering the main axis as the first argument; otherwise
%\item ~
%  \begin{itemize}
%    \item if it is known which is smaller among $b$ and $c$, it is 
%      possible to use |\AxisFromAxisAndFocus| by entering the smaller
%      one as the first argument; otherwise
%    \item determine the main axis by using |\MainAxisFromAxisAndFocus|
%  \end{itemize}
%\end{itemize}
% Their syntaxes of these two commands are basically the following:
%\begin{ttsyntax}
%\cs{AxisFromAxisAndFocus}\meta{main axis} and\meta{axis or focus} to\meta{focus or axis}
%\cs{MainAxisFromAxisAndFocus}\meta{axis or focus} and\meta{focus or axis} to\meta{main axis}
%\end{ttsyntax}
% but it is possible to enter the data in a different way with the
% first command; the described syntax is the suggested one.
% Evidently \meta{axis or focus} and \meta{focus or axis} imply
% that if you specify the focus in one of the two, you have to
% specify the axis in the other one.
%    \begin{macrocode}

\def\AxisFromAxisAndFocus#1and#2to#3{%
\fptest{abs(#1)>abs(#2)}%
   {\edef#3{\fpeval{sqrt(#1**2-#2**2)}}}%
   {\edef#3{\fpeval{sqrt(#2**2+#1**2)}}}}

\def\MainAxisFromAxisAndFocus#1and#2to#3{%
\edef#3{\fpeval{sqrt(#2**2+#1**2)}}}
%    \end{macrocode}
% The following macros allow to determine some scalar values relative
% to segments; in the second one the order of the segment end points is
% important, because the computed argument refers to the vector $P_2 - P_1$.
% Their syntaxes are the following:
%\begin{ttsyntax}
%\cs{SegmentLength}\parg{P1}\parg{P2}to\meta{length}
%\cs{SegmentArg}\parg{P1}\parg{P2}to\meta{argument}
%\end{ttsyntax}
% Both \meta{length} and \meta{argument} are macros that contain
% scalar quantities; the argument is in the range
% $-180^\circ <\Phi \leq +180^\circ$.
%    \begin{macrocode}

\def\SegmentLength(#1)(#2)to#3{\SubVect#1from#2to\Segm
\ModOfVect\Segm to#3}

\def\SegmentArg(#1)(#2)to#3{\SubVect#1from#2to\Segm
\GetCoord(\Segm)\SegmX\SegmY\edef#3{\fpeval{atand(\SegmY,\SegmX)}}%
\ignorespaces}
%    \end{macrocode}
%
% In the following sections we need some transformations, in
% particular the affine shear one. The macros we define here are
% not for general use, but are specific for the purpose of this package.
% 
% The fist macro shears a segment, or better a vector that goes
% from point $P_1$ to point $P_2$ with a horizontal shear
% factor/angle $\alpha$; the origin of the vector does not vary
% and remains $P_1$ but the arrow tip of the vector is moved
% according to the shear factor; in practice this shearing macro
% is valid only for vectors that start from any point laying on
% the $x$ axis. The shear factor $\alpha$ is the angle of the
% \emph{clock wise} rotation vector operator by which the vertical
% coordinate lines get rotated with respect to their original position.
% The syntax is the following:
%\begin{ttsyntax}
%\cs{ShearVect}\parg{P1}\parg{P2}by\meta{shear} to\meta{vector}
%\end{ttsyntax}
% where \meta{P1} and \meta{P2} are the initial and final points of the
% vector to be sheared with the \meta{shear} angle, and the result is put
% in the output \meta{vector}
%    \begin{macrocode}

\def\ShearVect(#1)(#2)by#3to#4{%
\SubVect#1from#2to\AUX 
\GetCoord(\AUX)\Aux\Auy
\edef\Aux{\fpeval{\Aux + #3*\Auy}}%
\edef\Auy{\fpeval{\Auy}}%
\AddVect\Aux,\Auy and#1to#4\ignorespaces}

%    \end{macrocode}
% Again we have another different |\ScaleVector| macro that takes in input
% the starting and ending points of a vector, and scales the vector
% independently of the initial point.
%    \begin{macrocode}

\def\ScaleVector(#1)(#2)by#3to#4{%
% Scala per il fattore #3 il vettore da #1 a #2
\SubVect#1from#2to\AUX
\ScaleVect\AUX by#3to\AUX
\AddVect\AUX and#1to#4\ignorespaces}
%    \end{macrocode}
%
% The following macro to draw a possibly sheared ellipse appears
% complicated; but in reality it is not much different from a
% “normal” ellipse drawing command. In oder to do the whole work
% the ellipse center is set in the origin of the axes, therefore
% it is not altered by the shearing process; everything else is
% horizontally sheared by the shear angle $\alpha$. In particular the
% 12~nodes and control point that are required by the Bézier
% splines that draw the four ellipse quarters. It is this multitude
% of shearing commands that makes the macro mach longer and apparently
% complicated.
% The syntax is the following:
%\begin{ttsyntax}
%\cs{Sellisse}\meta{$\star$}\marg{h-axis}\marg{v-axis}\oarg{shear}
% \end{ttsyntax}
% where the optional asterisk is used to mark and label the Bézier
% spline nodes and the control points of the possibly sheared ellipse;
% without the asterisk the ellipse is drawn without any “decoration”;
% the optional \meta{shear} is as usual the angle of the sheared
% vertical coordinate lines; its default value is zero.
%    \begin{macrocode}
%
\NewDocumentCommand\Sellisse{s m m O{0}}{\bgroup
\CopyVect#2,#3to\Ptr \ScaleVect\Ptr by-1to\Pbl
\CopyVect#2,-#3to\Pbr \ScaleVect\Pbr by-1to\Ptl
\edef\Ys{\fpeval{tand{#4}}}%
\edef\K{\fpeval{4*(sqrt(2)-1)/3}}%
%
\ShearVect(0,0)(0,#3)by\Ys to\Pmt
\ShearVect(0,0)(0,-#3)by\Ys to\Pmb
\ShearVect(0,0)(#2,0)by\Ys to\Pmr 
\ShearVect(0,0)(-#2,0)by\Ys to\Pml
%
\ShearVect(\Pmr)(\Ptr)by\Ys to\Ptr 
\ShearVect(\Pml)(\Ptl)by\Ys to\Ptl 
\ShearVect(\Pmr)(\Pbr)by\Ys to\Pbr 
\ShearVect(\Pml)(\Pbl)by\Ys to\Pbl
%
\IfBooleanTF{#1}{\Pbox(\Ptr)[bl]{P_{tr}}\Pbox(\Pbl)[tr]{P_{bl}}%
\Pbox(\Pbr)[tl]{P_{br}}\Pbox(\Ptl)[br]{P_{tl}}%
\polygon(\Pbr)(\Ptr)(\Ptl)(\Pbl)}{}% 
%
\ScaleVector(\Pmr)(\Ptr)by\K to\Crt 
\ScaleVector(\Pmr)(\Pbr)by\K to\Crb 
\ScaleVector(\Pml)(\Ptl)by\K to\Clt 
\ScaleVector(\Pml)(\Pbl)by\K to\Clb 
\ScaleVector(\Pmt)(\Ptr)by\K to\Ctr 
\ScaleVector(\Pmt)(\Ptl)by\K to\Ctl 
\ScaleVector(\Pmb)(\Pbr)by\K to\Cbr 
\ScaleVector(\Pmb)(\Pbl)by\K to\Cbl
% 
\IfBooleanTF{#1}{%
 \Pbox(\Crt)[l]{C_{rt}}\Pbox(\Crb)[l]{C_{rb}}
 \Pbox(\Clt)[r]{C_{lt}}\Pbox(\Clb)[r]{C_{lb}}
 \Pbox(\Ctr)[b]{C_{tr}}\Pbox(\Ctl)[b]{C_{tl}}
 \Pbox(\Cbr)[t]{C_{br}}\Pbox(\Cbl)[t]{C_{bl}}
%
\Pbox(\Pmr)[l]{P_{mr}}\Pbox(\Pmt)[b]{P_{mt}}%
\Pbox(\Pml)[r]{P_{ml}}\Pbox(\Pmb)[t]{P_{mb}}%
%
\polygon(\Pbr)(\Ptr)(\Ptl)(\Pbl)\thicklines}{}%
%
\moveto(\Pmr)
\curveto(\Crt)(\Ctr)(\Pmt)
\curveto(\Ctl)(\Clt)(\Pml)
\curveto(\Clb)(\Cbl)(\Pmb)
\curveto(\Cbr)(\Crb)(\Pmr)
\fillstroke
\egroup} 

%    \end{macrocode}
% This user macro is used to call the |\Sellisse| macro with
% the desired parameters, but also to act with it on order
% to fill or stroke the ellipse contour, and to select some
% settings such as the contour line thickness, or the color
% of the ellipse contour or interior.
% the syntax is the following:
%\begin{ttsyntax}
%\cs{XSellisse}\meta{$\star$1}\parg{center}\oarg{angle}\aarg{shear}\marg{h-axis}\marg{v axis}\meta{$\star$2}\oarg{settings1}\oarg{settings2}
%\end{ttsyntax}
% where there are two optional asterisks, \meta{$\star$1} and
% \meta{$\star$2}; the first one controls the coloring of the ellipse:
% if present the interior is filled, if absent the contour is stroked; the
% second one controls the way a possibly sheared ellipse appears:
% if present, the construction is shown, if absent only the final result
% is shown; \meta{center} is optional: if present, the ellipse center is
% specified; if absent, its center is at the origin of the picture axes;
% \meta{angle} is optional with default value zero: if absent,
% the ellipse is not rotated and the \meta{h-axis} remains horizontal,
% while the \meta{v-axis} remains vertical, while if present and with a
% non vanishing value, the ellipse is rotated counterclockwise
% the amount specified, and, of course, if the value is negative,
% the rotation is clockwise. The optional parameter \meta{shear},
% if present, shears the ellipse paralle the \meta{h-axis} direction;
% the \meta{settings1} and \meta{settings2} operate as described
% for command \cs{Xellisse}.
%    \begin{macrocode}

\NewDocumentCommand\XSellisse{ s D(){0,0} O{0} D<>{0} m m s O{} o }%
    {\IfBooleanTF#1{\let\fillstroke\fillpath}%
                   {\let\fillstroke\strokepath}%
    \put(#2){\rotatebox{#3}{#8\relax
    \IfBooleanTF{#7}{\Sellisse*{#5}{#6}[#4]}%
                  {\Sellisse{#5}{#6}[#4]}%
    \IfValueTF{#9}{\let\fillstroke\strokepath
                   #9\Sellisse{#5}{#7}[#4]}{}}}%
    \ignorespaces}
%    \end{macrocode}
%
%^^A%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%
% \subsection{Regular polygons and special ellipses}
%^^A%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%
%
% We finally arrive to more complex macros used to create special
% polygons and special ellipses.
%
%^^A%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%
% \subsubsection{Regular polygons}
%^^A%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%
% Regular polygons are not that special; it is possible to draw them
% by using the |\multiput| or |\xmultiput| commands, but a single
% command that does everything by itself with more built in
% functionalities is much handier. The new command |\RegPolygon|
% has the following syntax:
%\begin{ttsyntax}
%\cs{RegPoligon}\meta{$\star$}\parg{center}\marg{radius}\marg{number}\oarg{angle}\aarg{settings}
%\end{ttsyntax}
% where \meta{$\star$} is an optional asterisk; its presence means
% that the  polygon interior is filled, instead of the polygon
% contour being stroked; the \meta{center} specification of the
% polygon is optional; if it is omitted, the polygon center goes
% to the origin of the |picture| coordinates; \meta{radius} is the
% mandatory radius of the circumscribed circle, or, in other words,
% the distance of each polygon vertex form the \meta{center}; the
% mandatory \meta{number} is an integer that specifies the number of
% polygon sides; the first vertex that is being drawn by this
% command, has an angle of zero degrees with respect to the
% \meta{center}; if a different initial \meta{angle} different from
% zero is desired, it is specified through this optional argument;
% possibly the angle bracketed optional \meta{setting} parameter
% may be used to specify, for example, the line thickness for the
% contour, and/or the color for the polygon contour or interior.
% See the documentation \file{euclideangeometry-man.pdf} for more
% information and usage examples. 
%    \begin{macrocode}
\newcount\RPI
\NewDocumentCommand\RegPolygon{s D(){0,0}  m m O{0} D<>{\relax} }{{%
%\countdef\RPI=258 
\RPI=0
\CopyVect#5:#3to\P
\CopyVect\fpeval{360/#4}:1to\R
\put(#2){#6\relax
         \moveto(\P)\fpdowhile{\RPI < #4}%
         {\MultVect\P by\R to\P
         \lineto(\P)\advance\RPI by 1}%
         \IfBooleanTF{#1}%
         {\fillpath}{#6\strokepath}}}\ignorespaces}
%%%%%%%%%
\def\DirOfVect#1to#2{\GetCoord(#1)\t@X\t@Y
\ModOfVect#1to\@tempa
\unless\ifdim\@tempa\p@=\z@
   \DividE\t@X by\@tempa to\t@X
   \DividE\t@Y by\@tempa to\t@Y
\fi\MakeVectorFrom\t@X\t@Y to#2\ignorespaces}%
%    \end{macrocode}
%
%^^A%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%
% \subsubsection{The Steiner ellipse}
%^^A%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%
% The construction of the Steiner ellipse is very peculiar; it is
% almost intuitive that any triangle has infinitely many internal
% tangent ellipses; therefore it is necessary to state some other
% constraints to find one specific ellipse out from this unlimited set.
%
% One such ellipse is the Steiner one, obtained by adding the
% constraint that the ellipse be tangent to the median points 
% of the triangle sides. But one thing is the definition, and
% another totally different one is to find the parameters of
% such an ellipse; and working with ruler and compass, it is
% necessary to find a procedure to draw such an ellipse.
%
% The construction described here and implemented with the
% |SteinerEllipse| macro is based on the following steps, each
% one requiring the use of some of the commands and/or
% transformations described in the previous sections.
%\begin{enumerate}[noitemsep]
%^^A
%\item Given a generic triangle (the coordinates of its three
% vertices) it is not necessary, but it is clearer to explain,
% if the triangle is shifted and rotated so as to have one of
% its sides horizontal, and the third vertex in the upper part
% of the |picture| drawing. So we first perform the initial
% shift and rotation and memorise the parameters of this
% transformation so that, at the end of the procedure, we can
% put back the triangle (and its Steiner ellipse) in its 
% original position. Let us call this shifted and rotated triangle
% with the symbol $T_0$.
%^^A
%\item We transform  $T_0$ with an affine shear transformation into an
% isosceles triangle $T_1$ that has the same base and the same
% height as $T_0$. We memorise the shear  “angle” so as to proceed
% to an inverse transformation when the following steps are completed:
% let be $\alpha$ this shear angle; geometrically it represents the
% angle of the sheared vertical coordinate lines with respect
% to the original vertical position.\label{enum:shear}
%^^A
%\item With another affine vertical scaling transformation we transform $T_1$ into an equilateral triangle $T_2$; the ratio of the vertical
% transformation equals the ratio between the $T_2$  to the
% $T_1$ heights; we memorise this ratio for the reverse transformation
% at the end of the procedure.\label{enum:ratio}
%^^A
%\item The Steiner ellipse of the equilateral triangle $T_2$ is its
% incircle. We are almost done; we just have to proceed to the
% inverse transformations; getting back from $T_2$ to $T_1$ first implies
% transforming the incircle of $T_2$ into an ellipse with its
% vertical axis scaled by the inverse ratio memorised in
% step~\ref{enum:ratio}.
%^^A
%\item The second inverse transformation by the shear angle is easy
% with the passage from $T_1$ to $T_0$, but it would be more difficult
% for transforming the ellipse into the sheared ellipse. We have already
% defined the |\Sellipse| and the |\XSellipse| macros that may take
% care of the ellipse  shear transformation; we already memorised the
% shear angle in step~\ref{enum:shear}, therefore the whole procedure,
% except for putting back the triangle, is almost done.
%^^A
%\item Eventually we perform the last shifting and rotating transformation
% and the whole construction is completed.
%^^A
%\end{enumerate}
%
% The new macro Steiner ellipse has therefore the following syntax:
%\begin{ttsyntax}
%\cs{SteinerEllipse}\meta{$\star$}\parg{P1}\parg{P2}\parg{P3}\oarg{diameter}
%\end{ttsyntax}
% where \meta{P1}, \meta{P2}, \meta{P3} are the vertices of the
% triangle; \meta{$\star$}  is an optional asterisk; without it
% the maro draws only the final result, that contains only the
% given triangle and its Steiner ellipse; on the opposite, if the asterisk
% is used the whole construction from $T_0$ to its Steiner ellipse
% is drawn; the labelling of points is done with little dots of
% the default \meta{diameter} or a specified value; by default it is a 1\,pt
% diameter, but sometimes it would be better to use a slightly
% larger value (remembering that 1\,mm  — about three points — 
% is already too much). 
% Please refer to the documentation file \file{euclideangeometry-man.pdf}
% for usage examples and suggestions.
%    \begin{macrocode}
%

\NewDocumentCommand\SteinerEllipse{s d() d() d() O{1}}{\bgroup
%
\IfBooleanTF{#1}{}{\put(#2)}{%
  \CopyVect0,0to\Pu  
  \SubVect#2from#3to\Pd 
  \SubVect#2from#4to\Pt 
  \ModAndAngleOfVect\Pd to\M and\Rot 
  \MultVect\Pd by-\Rot:1 to\Pd  \MultVect\Pt by-\Rot:1 to\Pt
  \IfBooleanTF{#1}{}{\rotatebox{\Rot}}{\makebox(0,0)[bl]{%
  \Pbox(\Pu)[r]{P_1}[#5]<-\Rot>\Pbox(\Pd)[t]{P_2}[#5]<-\Rot>
  \Pbox(\Pt)[b]{P_3}[#5]<-\Rot>%
  \polygon(\Pu)(\Pd)(\Pt)%
  \edef\B{\fpeval{\M/2}}\edef\H{\fpeval{\B*tand(60)}}
  \IfBooleanTF{#1}{\Pbox(\B,\H)[b]{H}[#5]
  \polygon(\Pu)(\B,\H)(\Pd)}{}%
  \edef\R{\fpeval{\B*tand(30)}}
  \IfBooleanTF{#1}{\Pbox(\B,\R)[bl]{C}[#5]
    \Circlewithcenter\B,\R radius{\R}}{}%
  \GetCoord(\Pt)\Xt\Yt\edef\VScale{\fpeval{\Yt/\H}}
  \IfBooleanTF{#1}{\polyline(\Pu)(\B,\Yt)(\Pd)
  \Pbox(\B,\Yt)[b]{V}[#5]}{}%
  \edef\Ce{\fpeval{\R*\VScale}}
  \IfBooleanTF{#1}{\Xellisse(\B,\Ce){\R}{\Ce}
    \Pbox(\B,\Ce)[r]{C_e}[#5]\Pbox(\B,0)[t]{B}[#5]}{}%
  \SubVect\B,0 from\Pt to\SlMedian 
  \IfBooleanTF{#1}{\Dotline(\B,0)(\Pt){2}[1.5]}{}%
  \ModAndAngleOfVect\SlMedian to\Med and\Alfa 
  \edef\Alfa{\fpeval{90-\Alfa}} 
    \IfBooleanTF{#1}{\Dotline(\B,\Yt)(\B,0){2}[1.5]
    \Pbox(\fpeval{\B+\Ce*tand{\Alfa}},\Ce)[l]{C_i}[#5]
    \VectorArc(\B,0)(\B,15){-\Alfa}
    \Pbox(\fpeval{\B+2.5},14)[t]{\alpha}[0]}{}%
  \edef\a{\R}\edef\b{\Ce}%
\CopyVect\fpeval{\B+\Ce*tand{\Alfa}},\Ce to\CI 
\XSellisse(\CI)<\Alfa>{\R}{\Ce}
}}}%
\egroup\ignorespaces}
\let\EllisseSteiner\SteinerEllipse
%    \end{macrocode}
%
%^^A%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%
%\subsubsection{The ellipse that is internally tangent to a triangle while one of its foci is prescribed}
%^^A%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%
% We now are going to tackle another problem. As we said before, any
% triangle has an infinite set of internally tangent circles, unless
% some further constraint is specified. 
%
% Another problem of this kind is the determination and geometrical
% construction of an internally tangent ellipse when one focus is
% specified; of course since the whole ellipse is totally internal
% to the triangle, we assume that the user has already verified 
% that the coordinates of the focus fall inside the triangle.
% We are not going to check this feature in place of the user;
% after all, if the user draws the triangle within a |picture| image,
% together with the chosen focus, is suffices a glance to verify that
% such focus lays within the triangle perimeter.
%
% The geometrical construction is quite complicated, but it is
% described in a paper by Estevão V.~Candia on \TB~2019 \textbf{40}(3);
% it consists of the following steps.
%\begin{enumerate}[noitemsep]
%^^A
%\item Suppose you have specified a triangle by means of its three
% vertices, and a point inside it to play the role of a focus; it
% is necessary to find the other focus and the main axis length in
% order to have a full description of the ellipse.
%^^A
%\item To do so, it is necessary to find the focus three symmetrical
% points with respect to the three sides.
%^^A
%\item The center of the three point circle through these symmetrical
% points is the second focus.
%^^A
%\item  The lines that join the second focus to the three symmetrical
% points of the first focus, intersect the triangle sides in three
% points that result to be the tangency points of the ellipse to the
% triangle.
%^^A
%\item Chosen one of these tangency points and computing the sum of its
% distances from both foci, the total length of the ellipsis  main axis
% is found.
%^^A
%\item Knowing both foci, the total inter focal distance is found,
% therefore equation~\eqref{equ:axes-foci} allows to find the other
% axis length.
%^^A
%\item The inclination of the focal segment gives us the the rotation
% to which the ellipse is subject, and the middle point of such
% segment gives the ellipse center.
%^^A
%\item At this point we have all the necessary elements to draw
% the ellipse.
%^^A
%\end{enumerate}
%
% We need another little macro to find the symmetrical points;
% if the focus $F$ and its symmetrical point $P$ with respect
% to a side/segment, the intersection of such segment $F-P$ with
% the side is the segment middle point $M$; from this property
% we derive the formula $P= 2M -F$. Now $M$  is also the
% intersection of the line passing through $F$ and perpendicular
% to the side. Therefore it is particularly simple to compute,
% but its better to have available a macro that does the whole
% work; here it is, but it assumes the the center of symmetry is
% already known:
%    \begin{macrocode}

\def\SymmetricalPointOf#1respect#2to#3{\ScaleVect#2by2to\Segm
\SubVect#1from\Segm to#3\ignorespaces}
%    \end{macrocode}
% And its syntax is the following:
%\begin{ttsyntax}
%\cs{SymmetricalPointOf}\meta{focus} respect\meta{symmetry center}
%\qquad to\meta{symmetrical point}
%\end{ttsyntax}
% where the argument names are self explanatory.
%
% The overall macro that executes all the passages described in
% the above enumeration follows; the reader can easily recognise
% the various steps, since the names of the macros are self
% explanatory; the $S_i$ point names are the symmetrical ones
% to the first focus $F$; the $M_i$ points are the centers of
% symmetry; the $F'$ point is the second focus; the $T_i$ points
% are the tangency points. The macro |\EllipseWithFOcus| has the
% following syntax: 
%\begin{ttsyntax}
%\cs{EllipseWithFocus}\meta{$\star$}\parg{P1}\parg{P2}\parg{P3}\parg{focus}
%\end{ttsyntax}
% where \meta{P1}, \meta{P2}, \meta{P3}  are the triangle vertices
% and  \meta{focus} contains the first focus coordinates; the
% optional asterisk, as usual, selects the construction steps
% versus the final result: no asterisk, no construction steps.
%    \begin{macrocode}

\NewDocumentCommand\EllipseWithFocus{s d() d() d() d()}{\bgroup%
\CopyVect#2to\Pu 
\CopyVect#3to\Pd 
\CopyVect#4to\Pt 
\CopyVect#5to\F 
\polygon(\Pu)(\Pd)(\Pt)
\Pbox(\Pu)[r]{P_1}[1.5pt]\Pbox(\Pd)[t]{P_2}[1.5pt]
\Pbox(\Pt)[b]{P_3}[1.5pt]\Pbox(\F)[b]{F}[1.5pt]
\SegmentArg(\Pu)(\Pt)to\At
\SegmentArg(\Pu)(\Pd)to\Ad
\SegmentArg(\Pd)(\Pt)to\Au
\IntersectionOfLines(\Pu)(\At:1)and(\F)(\fpeval{\At+90}:1)to\Mt
\IntersectionOfLines(\Pd)(\Ad:1)and(\F)(\fpeval{\Ad+90}:1)to\Md
\IntersectionOfLines(\Pd)(\Au:1)and(\F)(\fpeval{\Au+90}:1)to\Mu
\IfBooleanTF{#1}{\Pbox(\Mt)[br]{M_3}[1.5pt]\Pbox(\Md)[t]{M_2}[1.5pt]
  \Pbox(\Mu)[b]{M_1}[1.5pt]}{}
\SymmetricalPointOf\F respect\Mu to\Su 
\IfBooleanTF{#1}{\Pbox(\Su)[l]{S_1}[1.5pt]}{}
\SymmetricalPointOf\F respect \Md to\Sd 
\IfBooleanTF{#1}{\Pbox(\Sd)[t]{S_2}[1.5pt]}{}
\SymmetricalPointOf\F respect \Mt to\St 
\IfBooleanTF{#1}{\Pbox(\St)[r]{S_3}[1.5pt]}{}
\IfBooleanTF{#1}{\ThreePointCircle*(\Su)(\Sd)(\St)}%
                {\ThreePointCircle(\Su)(\Sd)(\St)}
\CopyVect\C to\Fp \Pbox(\Fp)[l]{F'}[1.5pt]
\IfBooleanTF{#1}{%
\Dotline(\F)(\St){2}[1.5pt] 
\Dotline(\F)(\Sd){2}[1.5pt]
\Dotline(\F)(\Su){2}[1.5pt]}{}
\IntersectionOfSegments(\Pu)(\Pt)and(\Fp)(\St)to\Tt
\IntersectionOfSegments(\Pu)(\Pd)and(\Fp)(\Sd)to\Td
\IntersectionOfSegments(\Pd)(\Pt)and(\Fp)(\Su)to\Tu
\IfBooleanTF{#1}{\Pbox(\Tu)[l]{T_1}[1.5pt]
\Pbox(\Td)[b]{T_2}[1.5pt]
\Pbox(\Tt)[tl]{T_3}[1.5pt]
\Dashline(\Fp)(\Su){1}\Dashline(\Fp)(\Sd){1}\Dashline(\Fp)(\St){1}}{}
\DistanceAndDirOfVect\Fp minus\Tt to\DFp and\AFu 
\DistanceAndDirOfVect\F  minus\Tt to\DF and\AF 
\SegmentCenter(\F)(\Fp)to\CE \Pbox(\CE)[b]{C}[1.5pt]
\edef\a{\fpeval{(\DFp+\DF)/2}} 
\SegmentArg(\F)(\Fp)to\AngFocalAxis  
\SegmentLength(\F)(\CE)to\c
\AxisFromAxisAndFocus\a and\c to\b 
\Xellisse(\CE)[\AngFocalAxis]{\a}{\b}[\thicklines]
\VECTOR(-30,0)(120,0)\Pbox(120,0)[t]{x}[0]
\VECTOR(0,-20)(0,130)\Pbox(0,130)[r]{y}[0]\Pbox(0,0)[tr]{O}[1.5pt]
\egroup\ignorespaces}
\let\EllisseConFuoco\EllipseWithFocus
%    \end{macrocode}
%
%^^A%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%
% \section{Comments on this package}
%^^A%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%
%
% In general we found very comfortable to draw ellipses and
% to define macros to draw not only such shapes or filled elliptical
% areas, but also to create “legends” with coloured backgrounds and
% borders; such applications found their way in other works.
% But here we dealt with other geometrical problems. The accompanying
% document |euclideangeometry-man.pdf| describes much clearly with
% examples  what you can do with the macros described in this package.
% In facts, this file just describes the package macros, and it gives
% some ideas on how to extend the ability of |curve2e| to draw geometrical
% diagrams.
% The users who would like to modify or to add some functionalities
% are invited to do so; I will certainly acknowledge their contributions
% and even add their names to the list of authors.
%
% As long as I can, I enjoy playing with \LaTeX and its wonderful
% facilities; but, taking into consideration my age, I would invite
% the users to consider the possibility of assuming the maintenance
% of this package.
%^^A%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%
%\section*{Aknowledgements}
%^^A%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%
% I am very grateful to Enrico Gregorio who let me know the several
% glitches I made in my first version; besides being a real \TeX wizard,
% he is a wise person and suggested me several things that was important
% to change, because they could offer risks of confusion with other packages.
%
%\iffalse
%</package>
%\fi
%
%\iffalse
%<*readme>
%^^A\fi
% \section{The \texttt{README.txt} file}
% The following is the text that forms the contents of the |README.txt|
% file that accompanies the package. We found it handy to have it in
% the documented source, because in this way certain pieces of
% information don't need to be repeated again and again in different
% files. 
%    \begin{macrocode}
The package bundle euclideangeometry is composed of the following files

euclideangeometry.dtx
euclideangeometry.pdf
euclideangeometry-man.tex
euclideangeometry-man.pdf
README.txt

euclideangeometry.dtx is the documented TeX source file of package 
euclideangeometry.sty; you get euclideangeometry.sty,
euclideangeometry.pdf by running pdflatex on euclideangeometry.dtx. 

README.txt, this file, contains general information.

euclideangeometry-man.tex and euclideangeometry-man.pdf are 
the source file and the readable document containing the end 
user manual. 
In other words euclideangeometry.pdf is oriented towards the 
developers and euclideangeometry-man.pdf to the end users.


Claudio Beccari

claudio dot beccari at gmail dot com
%    \end{macrocode}
%^^A\iffalse
%</readme>
%\fi
% \Finale
%^^A <driver>\endinput