% \iffalse meta-comment % % Copyright (C) 2021 by Qu Yi % % This work may be distributed and/or modified under the % conditions of the CC-BY 4.0 License. % The latest version of this license is in % https://creativecommons.org/licenses/by/4.0/legalcode %<*driver> \def\nameofplainTeX{plain} \ifx\fmtname\nameofplainTeX\else \expandafter\begingroup \fi %<*install> \input ctxdocstrip \keepsilent \askforoverwritefalse % \preamble Copyright (C) 2021 by Qu Yi This work may be distributed and/or modified under the conditions of the CC-BY 4.0 License. The latest version of this license is in https://creativecommons.org/licenses/by/4.0/legalcode \endpreamble % \generate { \usedir{tex/latex/\jobname} \file{\jobname.cls}{\from{\jobname.dtx}{class}} } % \ifx\fmtname\nameofplainTeX \expandafter\endbatchfile \else \expandafter\endgroup \fi % %<*driver> \documentclass{ctxdoc} \OnlyDescription \begin{document} \DocInput{\jobname.dtx} \IndexLayout \PrintChanges \PrintIndex \end{document} % % \fi % % \changes{v1.20}{2021/01/09}{修改和完善用户文档。} % \changes{v1.20}{2021/01/09}{模板更改为使用 CC-BY 许可协议。} % \changes{v1.23z}{2021/03/19}{修复在 \pkg{ctex} v2.5.6 更新后 \cls{easybook} 与 \pkg{hyperref} 冲突问题。} % % \CheckSum{0} % % \CharacterTable % {Upper-case \A\B\C\D\E\F\G\H\I\J\K\L\M\N\O\P\Q\R\S\T\U\V\W\X\Y\Z % Lower-case \a\b\c\d\e\f\g\h\i\j\k\l\m\n\o\p\q\r\s\t\u\v\w\x\y\z % Digits \0\1\2\3\4\5\6\7\8\9 % Exclamation \! Double quote \" Hash (number) \# % Dollar \$ Percent \% Ampersand \& % Acute accent \' Left paren \( Right paren \) % Asterisk \* Plus \+ Comma \, % Minus \- Point \. Solidus \/ % Colon \: Semicolon \; Less than \< % Equals \= Greater than \> Question mark \? % Commercial at \@ Left bracket \[ Backslash \\ % Right bracket \] Circumflex \^ Underscore \_ % Grave accent \` Left brace \{ Vertical bar \| % Right brace \} Tilde \~} % % \title{\sffamily easybook书籍文档类} % \author{瞿毅} % \date{2021/03/23\hskip\ccwd\relax v1.23z\thanks{\url{https://gitee.com/texl3/easybook}}} % \maketitle % \begin{abstract} % \cls{easybook} 是基于 \cls{ctexbook} 书籍文档类创建以极简为风格的模板,可以看作对 \cls{ctexbook} 的进一步包装。虽然\CTeX 文档类提供了较好的中文支持,但想实现个性化功能一般需要在其基础上载入更多宏包来定制。\cls{easybook} 考虑了一些细节并载入一些常用宏包实现一般的排版需求,它适用于排版中英文书籍或笔记,甚至可稍加调整成为学位论文模板。 % \end{abstract} % \tableofcontents % % \begin{documentation} % \section{编译方式} % 模板含有一个使用示例文件 \opt{easybook-demo.tex},编译前建议满足以下的条件 % \begin{itemize} % \item 使用 \hologo{XeLaTeX}(推荐)或 \hologo{LuaLaTeX} 两种编译方式。 % \item 由于用到了一些宏包较新的功能,建议安装最新的\TeX 发行版并将所有宏包升级为最新,目前在 \hologo{MiKTeX} 21.2和 \TeX Live 2020可以正常编译。 % \end{itemize} % % \subsection{编译步骤} % \begin{frameverb} % xelatex -shell-escape easybook-demo % bibtex easybook-demo % makeindex easybook-demo % xelatex -shell-escape easybook-demo % xelatex -shell-escape easybook-demo % \end{frameverb} % % 需注意,正确\textbf{编译索引}需要增加 \opt{-shell-escape} 命令行选项。若不需要索引和参考文献,可以在正文中注释掉命令。若出现以下警告,再编译一次即可。 % \begin{frameverb} % LaTeX Warning: Label(s) may have changed. Rerun to get cross-references right. % \end{frameverb} % % \subsection{字体设置} % \label{subsec:font settings} % 默认使用\CTeX 预置中文字库,当开启 \opt{font = noto} 选项时需要安装开源字体,中文使用方正系列的{\songti 方正书宋}、{\heiti 方正黑体}、{\kaishu 方正楷体}和{\fangsong 方正仿宋},英文使用思源系列的{\rmfamily Noto Serif}、{\sffamily Noto Sans}和{\ttfamily Noto Sans Mono},数学字体使用 \pkg{notomath}。相关选项可以见节 \ref{sec:document class options} 中的 \opt{font} 选项,字体点击此处下载\href{https://wws.lanzous.com/b01ns361i}{下载地址}。 % % 如果您不想使用\CTeX 默认字体和方正、思源字体,\textbf{自定义字体}需启用选项 \opt{font = none},并可在导言区设置中文字体,粗体与斜体不设置会产生警告。 % \begin{ctexexam} % \setCJKmainfont{SimSun}[BoldFont = SimHei,ItalicFont = KaiTi] % \setCJKsansfont{SimHei} % \setCJKmonofont{FangSong} % \end{ctexexam} % % \section{文档类选项} % \label{sec:document class options} % 标准 \cls{book} 文类与 \cls{ctexbook} 文类的选项同样适用于本文档。除此之外选项分为两类 % \begin{itemize} % \item 带有 \rexptarget\rexpstar{} 号的选项,需要在引入文档类的时候设定。 % \item 带有 \exptarget\expstar{} 号的选项,需要通过\CTeX 宏集提供的用户接口命令 \tn{ctexset} 设定。 % \end{itemize} % % \begin{function}[rEXP,added = 2021-01-05]{draft} % 开启草稿模式会加快编译速度,表现有显示页面边框、行溢出的地方显示黑色方块、图片变成占位方框、显示当前日期和关闭超链接渲染。不载入 \pkg{tcolorbox} 宏包支持盒子环境也会提高编译速度,详情见小节 \ref{subsec:box}。 % \end{function} % % \begin{function}[rEXP,added = 2021-01-05]{newline} % 章标题风格为另起一行,英文模式使用较为常见。类似下面的效果 % \begin{flushleft}\sffamily\LARGE % Chapter 1\vskip 1.3pc % This is a title % \end{flushleft} % \end{function} % % \begin{function}[rEXP,added = 2021-01-05]{entitle} % 部分标题编号由中文数字变为大写罗马数字,章标题编号由中文数字变为阿拉伯数字。比如\textbf{第一部分}变为\textbf{第I部分},\textbf{第一章}变为\textbf{第1章}。 % \end{function} % \begin{function}[rEXP,added = 2021-01-05]{english} % 使各类标题变为英文形式。包括章节标题、图表标题和定理标题等。如\textbf{第一章}变为\textbf{Chapter 1},\textbf{图1.1} 变为 \textbf{Table 1.1}。 % \end{function} % \begin{function}[rEXP,added = 2021-01-05]{enstyle} % 同时开启 \opt{newline}、\opt{entitle} 和 \opt{english} 三个选项以符合英文原生风格。 % \end{function} % % \begin{function}[rEXP,added = 2021-01-05,updated = 2021-02-02]{font} % \begin{syntax} % font = % \end{syntax} % 传递给 \cls{ctexbook} 设置字体,最好不要使用原有的 \opt{fontset} 选项,默认情况下使用自定义字体而不开启这个选项,可根据安装的字体及电脑系统选取。\opt{noto} 与 \opt{none} 选项的相关描述见小节 \ref{subsec:font settings},\opt{overleaf} 是一个各系统通用选项,会检测系统环境选取对应字体。 % \changes{v1.21}{2021/01/12}{默认字体与\CTeX 一致,不再是自定义字体。} % \end{function} % % \begin{function}[rEXP,added = 2021-01-05,updated = 2021-01-13]{paper} % \begin{syntax} % paper = <(a4paper)|b5paper|letterpaper|...> % \end{syntax} % 设置页面大小,交给 \pkg{geometry} 宏包处理,可使用它支持的所有规格。建议选项 \opt{b5paper} 和 \opt{zihao = 5},选项 \opt{a4paper} 和 \opt{zihao = -4} 配合。 % \end{function} % % \subsection{article 模式} % \begin{function}[rEXP,added = 2021-03-16]{class} % \begin{syntax} % class = <(book)|article> % \end{syntax} % 设置文类风格,默认为 \opt{book} 文档类。选用 \opt{article} 使文档编号、结构等与 \cls{article} 文档类的特性相似,可用于短篇幅的文章,不要再使用 \tn{chapter} 命令,此时设置双栏目录的 \opt{style/multoc} 选项、小节 \ref{subsec:document command} 中打印目录命令的 \opt{multoc} 及 \opt{book} 选项均会失效,会以 \opt{section} 标题级别输出目录。 % \changes{v1.23z}{2021/03/16}{增加 article 文章模式,可用于短篇幅的文章。} % \end{function} % % \subsection{文档命令} % \label{subsec:document command} % \begin{function}[added = 2021-02-20,updated = 2021-03-15]{\frontmatter,\mainmatter,\backmatter,\tableofcontents,\listoffigures,\listoftables,\listoflistings} % \begin{syntax} % \tn{frontmatter*}\oarg{编号格式|(Roman)} % \tn{mainmatter*} % \tn{backmatter} % \tn{tableofcontents}\oarg{键值列表} % \tn{listoffigures*}\oarg{键值列表} % \tn{listoftables*}\oarg{键值列表} % \tn{listoflistings*}\oarg{键值列表} % \end{syntax} % \tn{frontmatter} 为前言区命令,章标题不编号,页码可设置为例如 \opt{roman}、\opt{Alph} 等格式,带有星号的命令 \tn{frontmatter*} 不使用 \tn{cleardoublepage}。\tn{mainmatter} 为主文区命令,章标题正常编号且页码为从1开始计数的阿拉伯数字,\tn{mainmatter*} 命令不使用 \tn{cleardoublepage}。\tn{backmatter} 为后记区命令,页码格式与编号保持不变,章标题不编号。\tn{listoffigures} 命令输出图片目录,\tn{listoftables} 命令输出表格目录,\tn{listoflistings} 命令输出代码目录。带有星号的目录命令不会添加进主文档目录中,目录的键值列表选项如下 % \changes{v1.23z}{2021/02/20}{重新定义文档结构划分命令。} % \end{function} % % \begin{function}{multoc,book,article} % \begin{syntax} % multoc = % \end{syntax} % \opt{multoc} 与 \opt{style/multoc} 选项具有相同的效果,但是具有优先性且可单独设置不同目录是否双栏排版。\opt{book} 选项使目录标题按照 \opt{chapter} 级别输出,\opt{article} 选项使目录标题按照 \opt{article} 级别输出,默认为 \opt{chapter} 级别。 % \changes{v1.23z}{2021/03/15}{为几个目录增加键值列表的选项,可设置标题输出级别以及是否加入主目录。} % \end{function} % % \section{接口选项} % \begin{function}[added = 2021-01-05]{\ctexset} % \begin{syntax} % \tn{ctexset}\marg{键值列表} % \end{syntax} % \cls{easybook} 扩展了\CTeX 宏集\LaTeX 3风格键值的通用控制命令 \tn{ctexset},接口选项同样用它设置, 原有的键值列表仍然可用。 % \end{function} % % \begin{function}[EXP,added = 2021-01-08]{config} % \begin{syntax} % config = <配置文件名> % \end{syntax} % \opt{config}为载入用户配置选项,配置文件名不需加括号但需带有后缀名如 \opt{tex}、\opt{def} 和 \opt{cfg}。 % \changes{v1.10}{2021/01/08}{加入载入用户配置选项。} % \end{function} % % \subsection{风格} % \begin{function}[EXP,added = 2021-01-05,updated = 2021-03-18]{color,multoc,withpart,footwith,notomath,rulewidth,uppercase,figure-sep,table-sep,listing-sep,equation-sep,number-sep} % \begin{syntax} % color = <(none)|seaside|energy|cyberpunk> % multoc = % withpart = % footwith = % notomath = <(true)|false> % rulewidth = <(0.75pt)> % uppercase = <(true)|false> % figure-sep = <(.)> % table-sep = <(.)> % listing-sep = <(.)> % equation-sep = <(.)> % number-sep = <(.)> % \end{syntax} % \ding{229} 以上选项路径为 \opt{style/...} % \changes{v1.10}{2021/01/08}{更改颜色实现方式与选项名。} % \changes{v1.23z}{2021/02/02}{noto风格的数学字体独立出来,可自定义设置。} % \changes{v1.23z}{2021/02/09}{增加控制页面横线粗细的选项。} % \changes{v1.23z}{2021/03/15}{增加控制编号连接符的选项。} % \end{function} % % \begin{optdesc} % \item[color] 主题颜色,包括标题、页眉颜色等,选项 \opt{none} 为黑白页面,但不包括超链接。 % \begin{function}{ctex@frame,ctex@emph,ctex@verb} % \begin{syntax} % \tn{definecolor}\oarg{类型}\marg{名称}\marg{模式列表}\marg{参数列表} % \end{syntax} % 主题颜色用到这三个颜色,可以使用 \tn{definecolor} 命令进行更改,类似地更改超链接颜色见小节 \ref{subsec:hyperlinks}。 % \changes{v1.10}{2021/01/08}{可以自定义主题颜色。} % \end{function} % \item[multoc] 开启双栏目录,可与 \opt{onecolumn} 和 \opt{twocolumn} 选项配合出单栏正文、单栏目录,双栏正文、单栏目录,单栏正文、双栏目录和双栏正文、双栏目录四种方式。 % \item[withpart] 使章跟随每一部分编号,默认不跟随。 % \item[footwith] 使脚注跟随编号的计数器,默认跟随章,当开启新的一章时脚注编号从1开始。 % \item[notomath] 使用 \opt{noto} 风格的数学字体,将会加载 \pkg{newtxmath} 宏包。 % \item[rulewidth] 调整页眉、定理盒子以及代码框线条的粗细。 % \item[uppercase] 使用 \tn{rightmark} 及 \tn{leftmark} 获取标题内容设置页眉页脚时英文是否大小写。 % \item[figure-sep] 图片标题编号的连接符。 % \item[table-sep] 表格标题编号的连接符。 % \item[listing-sep] 代码标题编号的连接符。 % \item[equation-sep] 公式编号的连接符。 % \item[number-sep] 统一设置所有编号的连接符。 % \end{optdesc} % % \subsection{超链接} % \label{subsec:hyperlinks} % \begin{function}[EXP,added = 2021-01-05,updated = 2021-01-08]{hyperlink,linkcolor,linktopage} % \begin{syntax} % hyperlink = <(edge)|various|none> % linkcolor = <(fresh)|cutepink|skyblue|crimson> % linktopage = % \end{syntax} % \ding{229} 以上选项路径为 \opt{link/...} % \changes{v1.10}{2021/01/08}{修复了 \opt{linktopage} 选项关闭时目录中标题编号无超链接的问题。} % \end{function} % % \begin{optdesc} % \item[hyperlink] \opt{edge} 使超链接为边框形式,\opt{various} 使超链接为彩色字体,有四种颜色风格。\opt{none} 关闭超链接边框与颜色,此时 \opt{linkcolor} 选项无效。 % \item[linkcolor] 超链接颜色样式。 % \begin{function}{ctex@link,ctex@url,ctex@cite} % \begin{syntax} % \tn{definecolor}\oarg{类型}\marg{名称}\marg{模式列表}\marg{参数列表} % \end{syntax} % 超链接颜色用到这三个颜色,可以使用 \tn{definecolor} 命令进行更改。 % \changes{v1.10}{2021/01/08}{可以自定义超链接颜色。} % \end{function} % \item[linktopage] 将目录中的超链接置于页码上,默认是置于标题上。 % \end{optdesc} % % \subsection{行距} % \begin{function}[EXP,added = 2021-01-05,updated = 2021-02-13]{line,table,math,caption,footnote} % \begin{syntax} % line = <(1.3)> % table = <(1.05)> % math = <(1.05)> % caption = <(1)> % footnote = <(1)> % \end{syntax} % \ding{229} 以上选项路径为 \opt{spread/...} \\ % 行距因子用于设置各种行距倍数,只能是浮点数,不能带有长度单位。\tn{ctexset} 原有的行距选项 \opt{linespread} 失效。各行距既可在导言区全局设置也可正文中设置对后面生效,行距的意义为 % \changes{v1.21}{2021/01/12}{增加脚注线间的距离选项。} % \changes{v1.23z}{2021/02/09}{取消使用 \pkg{zhlineskip} 宏包设置数学间距。} % \end{function} % % \begin{optdesc} % \item[line] 正文行距。 % \item[table] 表格行距。 % \item[math] 数学环境行距,包括 \pkg{amsmath} 和 \pkg{mathtools} 宏包附带的环境,但并未加载 \pkg{mathtools} 宏包。 % \item[caption] 图表代码标题行距。 % \item[footnote] 脚注行距。 % \end{optdesc} % % \subsection{其它字体} % \begin{function}[EXP,added = 2021-01-08,updated = 2021-02-13]{table-cap,figure-cap,listing-cap,footnote,marginpar} % \begin{syntax} % table-cap = <\tn{sffamily}\tn{small}> % figure-cap = <\tn{sffamily}\tn{small}> % listing-cap = <\tn{sffamily}\tn{small}> % footnote = <\tn{rmfamily}> % marginpar = <\tn{rmfamily}\tn{footnotesize}> % \end{syntax} % \ding{229} 以上选项路径为 \opt{elsefont/...} % \changes{v1.10}{2021/01/08}{加入自定义非正文字体选项。} % \changes{v1.23z}{2021/02/08}{修复使用 \tn{zihao} 命令设置字体失效的问题。} % \end{function} % % \begin{optdesc} % \item[table-cap] 表格标题的字体设置。 % \item[figure-cap] 图片标题的字体设置。 % \item[listing-cap] 代码标题的字体设置。 % \item[footnote] 脚注的字体设置,请不要使用字号命令。 % \item[marginpar] 边注的字体设置。 % \end{optdesc} % % \subsection{参考文献} % \begin{function}[EXP,added = 2021-01-11,updated = 2021-03-15]{backend,bib-style,cite-style,bibfile} % \begin{syntax} % backend = <(bibtex)|biblatex> % bib-style = <(numerical)|authoryear|其它格式> % cite-style = <标注风格> % bibfile = % \end{syntax} % \ding{229} 以上选项路径为 \opt{bibset/...} % \changes{v1.21}{2021/01/11}{增加 \opt{bibset} 选项,可以使用 \hologo{BibTeX} 或 \hologo{biber} 编译参考文献。} % \changes{v1.23z}{2021/02/23}{使用 \opt{bibset} 选项时可设置标注风格。} % \end{function} % % \begin{optdesc} % \item[backend] 参考文献处理后端,默认用传统的 \hologo{BibTeX} 处理参考文献。 % \item[bib-style] 参考文献格式为中国的参考文献推荐标准GB/T 7714-2015,有顺序编码制和著者-出版年制两种风格,理工科类一般使用顺序编码制,文科类一般使用著者-出版年制。若使用其它格式,使用 \hologo{BibTeX} 处理时需确保正确的 \opt{bst} 文件,使用 \hologo{biber} 处理可使用 \pkg{biblatex} 宏包支持的参考文献风格名称。 % \item[cite-style] 标注参考文献的风格,\opt{backend = bibtex} 选项下可使用 \opt{super}(数字上标标注,默认)或 \opt{numbers}(数字标注)等 \pkg{natbib} 宏包带有的标注风格,\opt{backend = biblatex} 选项下可使用 \pkg{biblatex} 宏包支持的标注风格名称。 % \item[bibfile] 参考文献的数据文件,使用 \hologo{biber} 处理时要带有 \opt{bib} 后缀,默认为一个以 \opt{refs.bib} 命名的文件。 % \end{optdesc} % % \begin{function}[added = 2021-01-11,updated = 2021-03-15]{\printbibliography} % \begin{syntax} % \tn{printbibliography}\oarg{键值列表} % \end{syntax} % 两种方式\textbf{均使用}此命令打印参考文献,不同处理后端此命令的键值列表不同。使用 \hologo{BibTeX} 处理时选项与小节 \ref{subsec:document command} 目录的选项相同,使用 \hologo{biber} 处理时常用的选项如下 % \end{function} % % \begin{function}{heading,title} % \begin{syntax} % heading = % title = <参考文献标题名> % \end{syntax} % \opt{heading} 为参考文献标题的处理方式,\opt{bibliography} 选项以 \opt{chapter} 级别输出参考文献,不加进目录,\opt{subbibliography} 选项以 \opt{section} 级别输出参考文献,不加进目录,\opt{bibintoc} 选项以 \opt{chapter} 级别输出参考文献,加进目录,\opt{subbibintoc} 选项以 \opt{section} 级别输出参考文献,加进目录。\opt{title} 选项覆盖由 \opt{heading} 选项提供的缺省标题名。除此之外其他支持选项可见 \pkg{biblatex} 宏包说明文档。 % \end{function} % % \subsection{定理样式} % \begin{function}[EXP,added = 2021-01-12,updated = 2021-03-13]{thmbox,numberwith,headpunct,bodyfont,notefont,headfont,headindent,spaceabove,spacebelow,spacepost} % \begin{syntax} % thmbox = % numberwith = <(chapter)|section|其它环境|空置> % headpunct = <(未设置)> % bodyfont = <(未设置)> % notefont = <(未设置)> % headfont = <(\tn{color}\marg{ctex@emph}\tn{sffamily})> % headindent = <(0\tn{ccwd})> % spaceabove = <(0.75ex plus .1ex)> % spacebelow = <(0.75ex plus .1ex)> % spacepost = <(\tn{ccwd})> % \end{syntax} % \ding{229} 以上选项路径为 \opt{thmset/...} % \changes{v1.21}{2021/01/12}{增加配置定理环境样式的选项。} % \end{function} % % \begin{optdesc} % \item[thmbox] 开启定理及习题环境的盒子边框,需载入 \pkg{tcolorbox} 宏包才生效。 % \item[numberwith] 定理编号跟随的计数器,默认跟随章的编号,也可以跟随其它定理环境的编号,当计数器增加时定理编号会从零开始,空置时不跟随其它计数器。 % \item[headpunct] 定理标题末尾后的标记,在换行符或第一段内容的间隔之前。 % \item[bodyfont] 定理内容部分的字体。 % \item[notefont] 定理副标题内容的字体。 % \item[headfont] 定理种类标题名的字体。 % \item[headindent] 定理标题的缩进,默认无缩进,可用 \tn{parindent} 命令设置为段落缩进。 % \item[spaceabove] 定理环境前的间距。 % \item[spacebelow] 定理环境后的间距。 % \item[spacepost] 定理标题后与第一段内容的间隔。 % \end{optdesc} % % \begin{function}[added = 2021-01-12,updated = 2021-03-13]{\newtheorem, \declaretheoremstyle} % \begin{syntax} % \tn{newtheorem}\oarg{键值列表}\marg{定理环境名} % \tn{declaretheoremstyle}\oarg{键值列表}\marg{定理样式名} % \end{syntax} % 文档类已预置8个定理环境,环境名及对应的定理标题名见小节 \ref{subsec:theorem},如果需要新的定理标题名或定理样式可使用这两个命令。 % \changes{v1.23z}{2021/03/12}{重新定义了新定理环境命令 \tn{newtheorem}。} % \end{function} % % \begin{optdesc} % \item[\tn{newtheorem}] 定义新的定理类环境,可选参数与 \pkg{thmtools} 宏包定理命令 \tn{declaretheorem} 的参数一致。常用的选项如下 % \begin{description} % \item[name] 定理的标题。默认值是环境的名称,并且首字母大写(英文标题)。 % \item[numbered] 值为 \opt{no}、\opt{yes} 或 \opt{unless unique}。定理将被编号,而不是编号,或者只有在文档中多次出现时才被编号。 % \item[numberlike] 定理将使用此计数器进行编号,通常这是另一个定理环境的名称。 % \item[style] 用 \tn{declaretheoremstyle} 定义的定理样式的名称,定理将使用这种样式的设置。 % \end{description} % \item[\tn{declaretheoremstyle}] 定义新的定理样式,可选参数中除了包括上述定理样式选项,还包括 \tn{newtheorem} 的选项。 % \end{optdesc} % % \subsubsection{新的定理样式} % 定理由 \pkg{thmtools} 设置,预置定理的样式为 \opt{mythm},上述定理样式选项将对这个定理样式生效。如果使用这个样式而只是增加新的定理名称,可以这样 % \begin{ctexexam} % \newtheorem[style = mythm,name = 定理名]{定理环境名} % \end{ctexexam} % 若要给定理环境增加边框,可以如下进行设置 % \begin{ctexexam} % \tcolorboxenvironment{定理环境名}{thmsty} % \end{ctexexam} % 定义一个新的定理样式可用于 \tn{newtheorem} 的 \opt{style} 选项。 % \begin{ctexexam} % \declaretheoremstyle[bodyfont = \rmfamily,spacepost = 0.5\ccwd]{定理样式名} % \end{ctexexam} % % \subsection{页面边距} % \begin{function}[EXP,added = 2021-01-13,updated = 2021-03-21]{footnotemargin,footparskip,footparindent,list-labelsep,left,top,hmargin,textwidth,includehead} % \begin{syntax} % footnotemargin = <脚注首行缩进|(0.5\tn{ccwd})> % footparskip = <脚注段落间距|(0ex)> % footparindent = <脚注分段缩进|(2\tn{ccwd})> % list-labelsep = <索引目录编号与标题的间距|(\tn{ccwd})> % left = <页面左边距> % top = <页面上边距> % hmargin = \marg{左边距,右边距} % textwidth = <页面文本区宽度> % includehead = % \end{syntax} % \ding{229} 以上选项路径为 \opt{geoset/...} \\ % \opt{geoset} 会将前4个选项以外的其它选项交给 \pkg{geometry} 宏包接口命令 \tn{geometry} 处理,并且选项的键值列表与之相同,上面的选项仅是一小部分,支持的参数可查阅宏包帮助文档。当在此设置页面大小时,会覆盖 \opt{paper} 选项的设置。 % \begin{ctexexam} % \ctexset % { % geoset = % { % top = 2.5cm, % bottom = 2.5cm, % left = 3.2cm, % right = 3.2cm, % list-labelsep = \hspace{0.5\ccwd} % } % } % \end{ctexexam} % \changes{v1.21}{2021/01/13}{增加配置页面边距的选项。} % \end{function} % % \subsection{页眉页脚} % \begin{function}[EXP,added = 2021-01-13,updated = 2021-03-14]{head-foot,chap-mark,sec-mark,headrule,footrule,footnoterule} % \begin{syntax} % head-foot = <页眉页脚中的内容> % chap-mark = <\tn{chaptermark} 标志命令 \tn{markboth} 中的内容> % sec-mark = <\tn{sectionmark} 标志命令 \tn{markright} 中的内容> % headrule = <页眉横线格式> % footrule = <页脚横线格式> % footnoterule = <脚注横线格式> % \end{syntax} % \ding{229} 以上选项路径为 \opt{hdrset/...} \\ % \opt{hdrset} 设置的命令由 \pkg{fancyhdr} 宏包提供支持,\opt{headrule}、\opt{footrule} 和 \opt{footnoterule} 三个横线选项一般可以使用 \tn{hrule} width \meta{长度} height \meta{高度} 命令来绘制,脚注横线默认为空。当然,手动绘制横线时线条粗细选项 \opt{style/rulewidth} 会失效。 % \changes{v1.21}{2021/01/11}{修复单面文档时页眉横线消失的问题。} % \changes{v1.21}{2021/01/13}{增加配置页眉页脚的选项。} % \changes{v1.23z}{2021/03/08}{优化页眉页脚设置,增加 \opt{chap-mark} 和 \opt{sec-mark} 选项。} % \changes{v1.23z}{2021/03/14}{可以手动绘制页眉、页脚和脚注的横线。} % \end{function} % % \begin{function}[added = 2021-01-13,updated = 2021-03-14]{,\easyhead,\easyfoot} % \begin{syntax} % \tn{easyhead}\oarg{位置}\marg{内容} % \tn{easyfoot}\oarg{位置}\marg{内容} % \end{syntax} % 命令 \tn{easyhead} 和 \tn{easyfoot} 的含义与 \tn{fancyhead} 和 \tn{fancyfoot} 相同,它们用于 \opt{head-foot} 选项中,设置的是一个名为 \opt{fancy} 的页面风格。\pkg{fancyhdr} 将页眉页脚分成了左中右和奇数页(odd)、偶数页(even)共12个部分,可选参数中E、O代表偶数、奇数,L、C、R代表左、中、右部分。单面打印时,含有偶数的选项无效。 % \begin{ctexexam} % \ctexset % { % hdrset = % { % head-foot = % { % \easyhead[ER]{\leftmark} % \easyhead[OL]{\rightmark} % \easyhead[EL,OR]{\textbf{\thepage}} % }, % sec-mark = {\CTEXthesection\hspace{0.5\ccwd}}, % headrule = {\hrule width \textwidth height 1pt} % } % } % \end{ctexexam} % \end{function} % % \subsection{目录样式} % \begin{function}[EXP,added = 2021-01-13,updated = 2021-01-15]{format,indent,rule} % \begin{syntax} % format = <目录标题格式> % indent = <目录标题左边缩进> % rule = <目录引导线样式> % \end{syntax} % \ding{229} 以上选项路径为 \opt{tocset/(level)/...} \\ % \opt{tocset} 将目录样式交给 \pkg{titletoc} 处理,\opt{level} 代表 \opt{part}、\opt{chapter}、\opt{section}、\opt{subsection} 和 \opt{lists} 五种级别的目录样式设置,其中 \opt{lists} 为图片、表格和代码目录样式的级别。 % % \opt{format} 是目录中标题的格式,可以设置字体和加入垂直间距等,垂直间距最好使用无间距重合的 \tn{addvspace} 命令。\opt{indent} 是目录中标题在页面左侧的缩进距离,应该有长度单位。\opt{rule} 选项中一般应当使用 \tn{tocrule} 命令,将会在接下来介绍。 % \changes{v1.21}{2021/01/13}{增加配置目录样式的选项。} % \end{function} % % \begin{function}[EXP,added = 2021-01-13,updated = 2021-01-15]{lists/lolskip,lists/belowoffset,tocset/belowoffset} % \begin{syntax} % lolskip = <(0.8pc)> % belowoffset = <(0pc)> % belowoffset = <(-1pc)> % \end{syntax} % \opt{lolskip} 是代码目录中章之间的代码标题的距离,与\CTeX 的表格目录和图片目录中章之间的标题距离选项 \opt{lotskip} 和 \opt{lofskip} 类似,它们的值均默认0.8 pc,在 \opt{article} 模式中此选项失效。\opt{belowoffset} 选项为主目录标题 \tn{contentsname} 后的间距补偿,一般为负值,用于抵消 \opt{format} 中设置的垂直间距。\opt{lists} 中的 \opt{belowoffset} 与之意义类似,但是一般为正值,可以在 \opt{article} 模式中使用。建议 \opt{lists/lolskip(0.8pc) + lists/format/addvspace(0.2pc) + lists/belowoffset(0pc) = belowoffset(-1pc)}。 % \end{function} % % \begin{function}[added = 2021-01-13,updated = 2021-01-15]{\tocrule} % \begin{syntax} % \tn{tocrule} = \oarg{引导点间距|(0.7pc)}\parg{引导点大小|(1.2)}\marg{引导点}\oarg{页码格式} % \end{syntax} % \tn{tocrule} 命令生成目录引导线,需要在 \opt{rule} 选项中使用,其中引导线间距需带有长度单位,引导点大小不带单位,为引导点符号正常大小的倍数,引导点一般为英文句号或 \tn{cdot} 中心点符号。页码格式的内容位于页码前面,可以设置页码字体、距离。 % \begin{ctexexam} % \ctexset % { % tocset = % { % chapter = % { % format = \addvspace{8pt}\large, % indent = 1.5\ccwd, % rule = \tocrule[0.6pc](1.1){.}[\zihao{5}] % } % } % } % \end{ctexexam} % \end{function} % % \section{常用环境} % % \subsection{公式} % \begin{function}[added = 2021-01-05]{equation,multline,gather,align} % \begin{syntax} % \tn{begin}\marg{环境名} % <行间公式> % \tn{end}\marg{环境名} % \end{syntax} % \pkg{amsmath} 宏包提供了一系列数学环境,它们可以排布各种对齐或不对齐的公式组。\env{multline} 环境用于一行无法放下的长公式,\env{gather} 环境用于每行居中的公式组,\env{align} 环境用于多列对齐的公式组。 % \end{function} % % \subsection{列表} % \begin{function}[added = 2021-01-05]{enumerate,itemize,description} % \begin{syntax} % \tn{begin}\marg{环境名}\oarg{键值列表} % \tn{item} <列表内容> % \tn{end}\marg{环境名} % \end{syntax} % \pkg{enumitem} 宏包为系统预置的列表环境 \env{enumerate}、\env{itemize}和 \env{description} 提供了更灵活的标签以及间距的控制,可使用 \tn{setlist} 命令设置原有的三种列表格式。已设置默认格式,若自定义标签可例如 % \begin{ctexexam} % \begin{enumerate}[label = \arabic*(a),leftmargin = 1cm,resume] % \begin{itemize}[label = \textbullet] % \begin{description}[font = \sffamily\bfseries,style = nextline] % \end{ctexexam} % \end{function} % % \subsubsection{排序列表} % \label{subsec:sort list} % 使用 \opt{enumerate} 环境可创建排序列表,使用 \env{enumerate*} 环境产生行内部列表,可以使用\textbf{A、a、I、i和1}作为可选项为 \env{enumerate} 与 \env{enumerate*} 格式化标签。若生成\textbf{Item I、Item II、Item III}格式可以这样 % \begin{ctexexam} % \begin{enumerate*}[(a)] % \begin{enumerate}[\bfseries{Item} I] % \end{ctexexam} % % \subsubsection{常规列表} % 使用 \env{itemize} 环境可创建不计数列表,列表环境中若换行不缩进,若在列表中分段后则缩进两字符。 \opt{itemize*} 为行内常规列表,也提供一个可选参数。 % % 用$\star$取代默认的符号 % \begin{ctexexam} % \begin{itemize*}[$\star$] % \begin{itemize}[$\star$] % \end{ctexexam} % % \subsubsection{主题列表} % 使用 \env{description} 环境可创建带有主题词的列表。 % \begin{ctexexam} % \begin{description} % \item[主题一] 内容一 % \item[主题二] 内容二 % \end{description} % \end{ctexexam} % % \subsection{定理} % \label{subsec:theorem} % \begin{function}[added = 2021-01-05,updated = 2021-01-08]{theorem,definition,lemma,corollary,proposition,example,remark,proof} % \begin{syntax} % \tn{begin}\marg{环境名} % <定理内容> % \tn{end}\marg{环境名} % \end{syntax} % 这些是已预置的定理环境,定理环境除了注和证明跟随章编号并可带有边框,边框和习题标题盒子可使用 \opt{thmbox = false} 开启,证明末尾会自动添加证明结束符。环境名对应的定理标题名如下 % \begin{center} % \begin{tabular}{*{8}{c}} % \toprule % theorem & definition & lemma & corollary & proposition & example & remark & proof \\ % 定理 & 定义 & 引理 & 推论& 性质 & 例 & 注 & 证明 \\ % \bottomrule % \end{tabular} % \end{center} % \end{function} % % \subsection{习题} % \label{subsec:exercise} % \begin{function}[added = 2021-01-05,updated = 2021-03-19]{exercise} % \begin{syntax} % \tn{begin}\marg{exercise}\oarg{颜色名|(LightYellow)}\oarg{编号|(1.)}\parg{标题|(习题)}\oarg{配置选项} % \tn{item} <习题内容> % \tn{end}\marg{exercise} % \end{syntax} % 习题环境 \env{exercise} 的标题紧接上一节编号并加入目录与页眉,当使用星号环境时不进行编号。三个可选参数中颜色为自定义或 \pkg{xcolor} 包含的颜色名称,正文编号格式与小节 \ref{subsec:sort list} 排序列表相同,标题名默认为摘要。注意,环境具有相同定界符的可选参数只能\textbf{从右往左}省略,省略的参数使用默认值。 % \begin{ctexexam} % \begin{exercise}[LightYellow][1.](习题) % \item 习题内容 % \item 习题内容 % \end{exercise} % \end{ctexexam} % \changes{v1.23z}{2021/02/08}{增加准确的习题盒子标题目录锚点。} % \end{function} % % \subsection{盒子} % \label{subsec:box} % 使用盒子以及小节 \ref{subsec:exercise} 中的 \env{exercise} 环境需要在导言区\textbf{手动载入} \pkg{tcolorbox} 宏包,它们的配置的选项同样由 \pkg{tcolorbox} 提供支持,具体选项可见宏包文档的 Option Keys 一节,可以进行边距、字体及背景颜色等各种个性化设置,一些配置会覆盖之前预置的设置。 % % \subsubsection{摘要盒子} % \begin{function}[added = 2021-01-05,updated = 2021-03-19]{outline} % \begin{syntax} % \tn{begin}\marg{outline}\parg{标题名称}\oarg{配置选项} % \tn{item} <摘要内容> % \tn{end}\marg{outline} % \end{syntax} % 摘要盒子可用于章前摘要,它的标题是可选参数,默认标题是摘要。 % \begin{ctexexam} % \begin{outline}(标题名称) % \item 摘要内容 % \item 摘要内容 % \end{outline} % \end{ctexexam} % \end{function} % % \subsubsection{段落盒子} % \begin{function}[added = 2021-01-05,updated = 2021-03-19]{mybox} % \begin{syntax} % \tn{begin}\marg{mybox}\oarg{颜色名|(MintCream)}\parg{段落标题}\oarg{配置选项} % <盒子内容> % \tn{end}\marg{mybox} % \end{syntax} % 环境 \opt{mybox} 创建一个段落盒子,可以添加可选参数的标题,否则无标题框。当使用带有星号的环境时 \oarg{颜色名} 选项生效,可以自定义背景颜色,否则无背景颜色。 % \begin{ctexexam} % \begin{mybox}*[MintCream](段落标题) % 盒子内容 % \tcblower % 盒子上下部分分界线 % 盒子内容 % \end{mybox} % \end{ctexexam} % \end{function} % % \subsubsection{行内盒子} % \begin{function}[added = 2021-03-13]{\concise,\fuzzy} % \begin{syntax} % \tn{concise}\oarg{颜色名}\marg{内容}\oarg{配置选项} % \tn{fuzzy}\oarg{颜色名}\marg{内容}\oarg{配置选项} % \end{syntax} % 设置了两个参数选项相同的行内盒子,盒子 \opt{concise} 为抄录盒子有三个参数,行内盒子内容是必选参数其他可选。盒子 \opt{fuzzy} 也是抄录盒子,具有模糊边缘类似高亮的效果。 % \end{function} % % \section{其它用法} % % \subsection{代码} % \begin{function}[added = 2021-01-05]{\lstinline,lstlisting,\listoflistings} % \begin{syntax} % \tn{lstinline}\oarg{键值列表}\marg{行内代码} % \tn{begin}\marg{lstlisting}\oarg{键值列表} % <行间代码> % \tn{end}\marg{lstlisting} % \end{syntax} % 加载 \pkg{listings} 宏包以对代码格式进行高度定制,代码样式可使用 \tn{lstset} 命令设置,\tn{listoflistings} 命令用于输出代码目录。 % \end{function} % % \subsection{物理量} % \begin{function}[added = 2021-01-05,updated = 2021-02-23]{\num,\si,\SI,\SIrange} % \begin{syntax} % \tn{num}\oarg{键值列表}\marg{数字} % \tn{si}\oarg{键值列表}\marg{单位} % \tn{SI}\oarg{键值列表}\marg{数字}\oarg{前缀}\marg{单位} % \tn{SIrange}\oarg{键值列表}\marg{数字1}\marg{数字2}\marg{单位} % \end{syntax} % \pkg{siunitx} 宏包的 \tn{num} 命令可以输出科学计数法,\tn{si} 命令支持数学模式,可以代替数学行内公式输入,而 \tn{SI} 命令可用来输出带有单位的量,\tn{SIrange} 可以输出带有范围和单位的量。 % \begin{ctexexam} % \num{-21x.3e5} % \si{mL.min^{-1}} % \SI{5}{\mole} % \SIrange[unit-color = green]{1.5}{4}{kg} % \end{ctexexam} % \end{function} % % \subsection{化学式} % \begin{function}[added = 2021-01-05]{\ch,\chemfig} % \begin{syntax} % \tn{ch}\oarg{键值列表}\marg{输入} % \tn{chemfig}\oarg{键值列表}\marg{分子代码} % \end{syntax} % 除了以普通公式的方式,化学式还可用 \pkg{chemformula} 实现,无机化学式使用 \tn{ch} 命令书写。有机化学式推荐在导言区载入 \pkg{chemfig} 宏包,使用\tn{chemfig} 命令完成。 % \end{function} % % \subsection{引用} % \begin{function}[added = 2021-01-05]{\cref} % \begin{syntax} % \tn{cref}\marg{标签} % \end{syntax} % 使用 \pkg{cleveref} 宏包的 \tn{cref} 命令进行引用,将会自动检测环境并添加相应的前缀。 % \end{function} % % \subsubsection{索引} % \begin{function}[added = 2021-01-05]{\index,\printindex} % \begin{syntax} % \tn{index}\marg{标签} % \tn{printindex}\oarg{索引名} % \end{syntax} % 使用 \pkg{imakeidx} 生成索引,\tn{printindex} 命令用于生成索引目录。仅做了简单的设置如将索引设为双栏并加入目录,其他选项可另外配置。 % \end{function} % % \subsubsection{自定义脚注} % \begin{function}[added = 2021-01-05]{\Footnote,\Footnotetext,\Footnotemark} % \begin{syntax} % \tn{Footnote}\marg{标记}\marg{插入文本} % \tn{Footnotetext}\marg{标记}\marg{插入文本} % \tn{Footnotemark}\marg{标记} % \end{syntax} % 自定义标记且不影响正常编号的脚注命令。 % \begin{ctexexam} % \Footnote{*}{这是可以自定义标记的脚注。} % \end{ctexexam} % \end{function} % % \subsubsection{边注} % \begin{function}[added = 2021-01-05]{\marginnote} % \begin{syntax} % \tn{marginnote}\oarg{左文本}\marg{右文本}\oarg{垂直偏移} % \end{syntax} % 命令 \tn{marginnote} 可以生成简单的边注,如果只给定了 \meta{右文本},那么边注在奇偶数页文字相同。如果同时给定了 \meta{左文本},则偶数页使用 \meta{左文本} 的文字。 % \end{function} % % \subsection{双语标题} % \begin{function}[added = 2021-03-19]{\bicaption,\bicaptionbox} % \begin{syntax} % \tn{bicaption}\oarg{目录标题1}\marg{标题2}\oarg{目录标题1}\marg{标题2} % \tn{bicaptionbox}\oarg{目录标题1}\marg{标题2}\oarg{目录标题1}\marg{标题2} % \oarg{宽度}\oarg{内部位置}\marg{内容} % \end{syntax} % 可以实现中英文双语标题,使用此功能需要在导言区载入 \pkg{bicaption} 宏包,具体用法见说明文档。 % \end{function} % % \subsection{插入文档} % \begin{function}[added = 2021-03-14]{\includepdf} % \begin{syntax} % \tn{includepdf}\oarg{键值列表}\marg{文档名} % \end{syntax} % 该命令由 \pkg{pdfpages} 提供,将其他 pdf 文档插入当前文档,比如插入封面,可以指定插入页数、逻辑页和横向等,详情查看宏包文档。 % \end{function} % % \subsection{指定行距的段落} % \begin{function}[added = 2021-03-14]{spacing} % \begin{syntax} % \tn{begin}\marg{spacing}\marg{浮点数} % <段落内容> % \tn{end}\marg{spacing} % \end{syntax} % 该环境由 \pkg{setspace} 提供,可以指定环境内段落的行距,使用浮点数控制行距倍数。 % \end{function} % \end{documentation} % % \StopEventually{} %<*class> \NeedsTeXFormat{LaTeX2e}[2020/10/01] \RequirePackage{l3keys2e} \ProvidesExplClass{easybook}{2021/03/23}{1.23z}{beta} \cs_generate_variant:Nn \keys_define:nn {nx} \cs_generate_variant:Nn \int_to_arabic:n {v} \cs_generate_variant:Nn \dim_add:Nn {NV} \cs_new_protected:Npn \__ctex_define:nn #1 {\keys_define:nn {ctex/#1}} \cs_new_protected:Npn \__put_ctexbook:n #1 {\PassOptionsToClass{#1}{ctexbook}} \cs_new_protected:Npn \__patch_cmd:Nnn #1#2#3 {\ctex_patch_cmd_once:NnnnTF #1{}{#2}{#3}{}{\ctex_patch_failure:N #1}} \cs_new_protected:Npn \__appto_cmd:Nn #1#2 {\ctex_appto_cmd:NnnTF #1{}{#2}{}{\ctex_patch_failure:N #1}} \bool_set_false:N \l__draft_bool \bool_set_false:N \l__newline_bool \bool_set_false:N \l__font_noto_bool \bool_set_true:N \l__zhtitle_bool \bool_set_true:N \l__lang_chinese_bool \bool_set_true:N \l__page_twoside_bool \bool_set_true:N \l__class_book_bool \clist_new:N \g__options_clist \keys_define:nn {easybook} { draft .code:n = {\bool_set_true:N \l__draft_bool}, newline .code:n = {\bool_set_true:N \l__newline_bool}, entitle .code:n = {\bool_set_false:N \l__zhtitle_bool}, english .code:n = {\bool_set_false:N \l__lang_chinese_bool}, enstyle .meta:n = {newline,entitle,english}, font .choice:, font .value_required:n = true, font/overleaf .code:n = {}, font/adobe .code:n = {\__put_ctexbook:n {fontset = #1}}, font/founder .code:n = {\__put_ctexbook:n {fontset = #1}}, font/mac .code:n = {\__put_ctexbook:n {fontset = #1}}, font/windows .code:n = {\__put_ctexbook:n {fontset = #1}}, font/linux .code:n = {\__put_ctexbook:n {fontset = ubuntu}}, font/none .code:n = {\__put_ctexbook:n {fontset = #1}}, font/noto .code:n = { \bool_set_true:N \l__font_noto_bool \__put_ctexbook:n {fontset = none} }, font .initial:n = overleaf, paper .choice:, paper .value_required:n = true, paper/unknown .code:n = {\PassOptionsToPackage{#1}{geometry}}, paper .initial:n = a4paper, oneside .value_forbidden:n = true, twoside .value_forbidden:n = true, oneside .code:n = { \bool_set_false:N \l__page_twoside_bool \__put_ctexbook:n {oneside} }, class .choice:, class .value_required:n = true, class/book .code:n = {}, class/article .code:n = {\bool_set_false:N \l__class_book_bool}, class .initial:n = book, unknown .code:n = {\clist_gput_right:No \g__options_clist{\CurrentOption}} } \ProcessKeysOptions{easybook} \bool_if:NTF \l__lang_chinese_bool {\__put_ctexbook:n {scheme = chinese}} {\__put_ctexbook:n {scheme = plain}} \clist_map_inline:nn { {svgnames}{xcolor}, {hang,stable}{footmisc}, {normalem}{ulem}, {protrusion = false}{microtype}, {shortlabels,inline}{enumitem}, {many}{tcolorbox}, {xindy}{imakeidx}, {CJKmath = true}{xeCJK}, {no-math}{fontspec}, {noto,upint}{newtxmath} }{\PassOptionsToPackage#1} \__put_ctexbook:n {\g__options_clist} \LoadClass[UTF8]{ctexbook} \bool_new:N \l__multoc_bool \bool_new:N \l__notomath_bool \bool_new:N \l__uppercase_bool \bool_new:N \l__chap_withpart_bool \tl_new:N \l__foot_numberwith_tl \tl_new:N \g__config_tl \seq_const_from_clist:Nn \c__options_path_seq { style,link,elsefont, spread,bibset,thmset, geoset,hdrset,tocset } \seq_map_inline:Nn \c__options_path_seq {\ctex_define:n {#1 .meta:nn = {ctex/#1}{##1}}} \ctex_define:n { config .tl_set:N = \g__config_tl, lstlistlistingname .tl_set:N = \lstlistlistingname, lstlistingname .tl_set:N = \lstlistingname } \__ctex_define:nn {style} { multoc .bool_set:N = \l__multoc_bool, multoc .default:n = true, withpart .bool_set:N = \l__chap_withpart_bool, withpart .default:n = true, withpart .initial:n = false, notomath .bool_set:N = \l__notomath_bool, notomath .default:n = true, notomath .initial:n = true, rulewidth .dim_set:N = \l__rule_width_dim, rulewidth .initial:n = 0.75pt, uppercase .bool_set:N = \l__uppercase_bool, uppercase .default:n = true, uppercase .initial:n = true, footwith .choice:, footwith .value_required:n = true, footwith/part .code:n = {\tl_set:Nn \l__foot_numberwith_tl{#1}}, footwith/page .code:n = {\tl_set:Nn \l__foot_numberwith_tl{#1}}, footwith/chapter .code:n = {}, footwith .initial:n = chapter, figure-sep .tl_set:N = \l__figure_separator_tl, table-sep .tl_set:N = \l__table_separator_tl, listing-sep .tl_set:N = \l__lstlisting_separator_tl, equation-sep .tl_set:N = \l__equation_separator_tl, number-sep .meta:n = { figure-sep = {#1},table-sep = {#1}, listing-sep = {#1},equation-sep = {#1} }, number-sep .initial:n = {.} } \RequirePackage { xcolor, footmisc,setspace, amsmath,amsthm,thmtools,cases, chemformula,siunitx,ulem,pifont, geometry,marginnote,nccfoots, pdfpages,graphicx, fancyhdr,titletoc, caption-light,subcaption, tabularx,multirow,makecell,booktabs, tasks,enumitem, listings, imakeidx } \ctex_at_end_preamble:n { \bool_if:NT \l__notomath_bool{\RequirePackage{newtxmath,bm}} \tl_if_empty:NF \g__config_tl{\file_input:n {\g__config_tl}} } \cs_new_protected:Npn \__ifpackage_later:nn #1#2 { \@ifpackagelater{#1}{#2} {}{\msg_warning:nnn {easybook}{package-old}{#1}} } \msg_new:nnn {easybook}{package-old} { Package~#1~has~been~out~of~date. \\ Some~problems~or~errors~may~occur \\ if~you~continue~compiling. \\\\ Please~update~your~macro~package~from~CTAN. } \clist_map_inline:nn { {expl3}{2020/10/27}, {xparse}{2020/10/27}, {l3keys2e}{2020/10/27}, {ctex}{2020/10/19}, {thmtools}{2020/08/01}, {caption-light}{2020/08/24} }{\__ifpackage_later:nn #1} \sys_if_engine_xetex:TF { \cs_new_eq:NN \__set_family:nnn \xeCJK_set_family:nnn \cs_new_eq:NN \__switch_family:n \xeCJK_switch_family:n }{ \cs_new_eq:NN \__set_family:nnn \ctex_ltj_set_family:nnn \cs_new_eq:NN \__switch_family:n \ctex_ltj_switch_family:n } \cs_new_protected:Npn \__setmainfont:nn #1#2 {\__fontspec_main_setmainfont:nn {#2}{#1}} \cs_new_protected:Npn \__setsansfont:nn #1#2 {\__fontspec_main_setsansfont:nn {#2}{#1}} \cs_new_protected:Npn \__setmonofont:nn #1#2 {\__fontspec_main_setmonofont:nn {#2}{#1}} \cs_new_protected:Npn \__setCJKmainfont:nn #1#2 {\__set_family:nnn {\CJKrmdefault}{#2}{#1}} \cs_new_protected:Npn \__setCJKsansfont:nn #1#2 {\__set_family:nnn {\CJKsfdefault}{#2}{#1}} \cs_new_protected:Npn \__setCJKmonofont:nn #1#2 {\__set_family:nnn {\CJKttdefault}{#2}{#1}} \cs_new_protected:Npn \__set_zhfont_songti:nn #1#2 {\__set_family:nnn {songti}{#2}{#1}} \cs_new_protected:Npn \__set_zhfont_heiti:nn #1#2 {\__set_family:nnn {heiti}{#2}{#1}} \cs_new_protected:Npn \__set_zhfont_kaishu:nn #1#2 {\__set_family:nnn {kaishu}{#2}{#1}} \cs_new_protected:Npn \__set_zhfont_fangsong:nn #1#2 {\__set_family:nnn {fangsong}{#2}{#1}} \tl_const:Nn \__option_zhfont_tl {UprightFont = *,AutoFakeBold = 1.5,ItalicFont = *} \cs_new_protected:Npx \__setCJKmainfont:n #1 {\__setCJKmainfont:nn {#1}{\__option_zhfont_tl}} \cs_new_protected:Npx \__setCJKsansfont:n #1 {\__setCJKsansfont:nn {#1}{\__option_zhfont_tl}} \cs_new_protected:Npx \__setCJKmonofont:n #1 {\__setCJKmonofont:nn {#1}{\__option_zhfont_tl}} \cs_new_protected:Npx \__set_zhfont_songti:n #1 {\__set_zhfont_songti:nn {#1}{\__option_zhfont_tl}} \cs_new_protected:Npx \__set_zhfont_heiti:n #1 {\__set_zhfont_heiti:nn {#1}{\__option_zhfont_tl}} \cs_new_protected:Npx \__set_zhfont_kaishu:n #1 {\__set_zhfont_kaishu:nn {#1}{\__option_zhfont_tl}} \cs_new_protected:Npx \__set_zhfont_fangsong:n #1 {\__set_zhfont_fangsong:nn {#1}{\__option_zhfont_tl}} \bool_if:NT \l__font_noto_bool { \__setmainfont:nn {NotoSerif} { Extension = .ttf, UprightFont = *-Regular, BoldFont = *-Bold, ItalicFont = *-Italic } \__setsansfont:nn {NotoSans} { Extension = .ttf, UprightFont = *-Regular, BoldFont = *-Bold, ItalicFont = *-Italic } \__setmonofont:nn {NotoSansMono} { Extension = .ttf, UprightFont = *-Regular, BoldFont = *-Bold } \__setCJKmainfont:nn {FZShuSong-Z01S} { UprightFont = *, BoldFont = FZHei-B01S, ItalicFont = FZKai-Z03S } \__setCJKsansfont:n {FZHei-B01S} \__setCJKmonofont:n {FZFangSong-Z02S} \__set_zhfont_songti:n {FZShuSong-Z01S} \__set_zhfont_heiti:n {FZHei-B01S} \__set_zhfont_kaishu:n {FZKai-Z03S} \__set_zhfont_fangsong:n {FZFangSong-Z02S} \cs_new_protected:Npn \songti{\__switch_family:n {songti}} \cs_new_protected:Npn \heiti{\__switch_family:n {heiti}} \cs_new_protected:Npn \kaishu{\__switch_family:n {kaishu}} \cs_new_protected:Npn \fangsong{\__switch_family:n {fangsong}} } \cs_if_exist:NF \kaishu{\cs_gset_eq:NN \kaishu\normalfont} \includepdfset{fitpaper = true} \geometry { vmargin = 2.54cm, hmargin = 3.17cm, columnsep = 2\ccwd, headheight = 2.04cm, headsep = 0.5cm, footskip = 0.79cm, footnotesep = 0.5cm, marginparsep = 8pt, marginparwidth = 2.54cm } \clist_new:N \g__geometry_clist \__ctex_define:nn {geoset} { footnotemargin .dim_set:N = \footnotemargin, footnotemargin .initial:n = 0.5\ccwd, footparskip .tl_set:N = \hangfootparskip, footparskip .initial:n = 0ex, footparindent .tl_set:N = \hangfootparindent, footparindent .initial:n = 2\ccwd, list-labelsep .dim_set:N = \list@labelsep, list-labelsep .initial:n = \ccwd, unknown .code:n = { \clist_gput_right:Nx \g__geometry_clist { \l_keys_key_str \tl_if_empty:NF \l_keys_value_tl{ = {#1}} } } } \cs_gset:Npn \cleardoublepage { \clearpage \bool_if:NT \l__page_twoside_bool { \int_if_odd:nF \c@page {\hbox:n {}\thispagestyle{empty}\clearpage} } } \RenewDocumentCommand{\frontmatter}{sO{Roman}} { \IfBooleanTF{#1}{\clearpage}{\cleardoublepage} \@mainmatterfalse \pagenumbering{#2} } \RenewDocumentCommand{\mainmatter}{s} { \IfBooleanTF{#1}{\clearpage}{\cleardoublepage} \@mainmattertrue \pagenumbering{arabic} } \cs_gset_eq:NN \easyhead\fancyhead \cs_gset_eq:NN \easyfoot\fancyfoot \__ctex_define:nn {hdrset} { head-foot .tl_set:N = \l__fancyhf_content_tl, head-foot .initial:n = { \easyhead[EC]{\color{ctex@frame}\kaishu\leftmark} \easyhead[OC]{\color{ctex@frame}\kaishu\rightmark} \easyhead[EL,OR]{\color{ctex@frame}\thepage} }, chap-mark .tl_set:N = \l__fancyhf_chap_mark_tl, chap-mark .initial:n = { \int_compare:nT {\c@secnumdepth > -1} { \if@mainmatter \ifodd\CTEX@chapter@numbering \CTEXthechapter\hspace{\ccwd} \fi \fi } }, sec-mark .tl_set:N = \l__fancyhf_sec_mark_tl, sec-mark .initial:n = { \int_compare:nT {\c@secnumdepth > 0} { \ifodd\CTEX@section@numbering \CTEXthesection\hspace{0.5\ccwd} \fi } }, headrule .tl_gset:N = \headrule, headrule .initial:n = { \group_begin: \color{ctex@frame}\vspace*{1.5pt} \hrule width \textwidth height \l__rule_width_dim \group_end: }, footrule .tl_gset:N = \footrule, footrule .initial:n = {}, footnoterule .tl_gset:N = \footnoterule, footnoterule .initial:n = { \group_begin: \color{ctex@frame} \hrule width 0.35\columnwidth height \l__rule_width_dim \vspace*{2.6pt} \group_end: } } \ctex_at_end_preamble:n { \exp_args:NV \geometry\g__geometry_clist \pagestyle{fancy} \fancyhf{} \bool_if:NTF \l__page_twoside_bool { \cs_gset:Npn \chaptermark#1 { \markboth { \bool_if:NTF \l__uppercase_bool {\text_uppercase:n {\l__fancyhf_chap_mark_tl#1}} {\text_titlecase_first:n {\l__fancyhf_chap_mark_tl#1}} }{ \bool_if:NTF \l__uppercase_bool {\text_uppercase:n {\l__fancyhf_chap_mark_tl#1}} {\text_titlecase_first:n {\l__fancyhf_chap_mark_tl#1}} } } \l__fancyhf_content_tl \cs_gset_eq:NN \ps@plain\ps@empty }{ \cs_gset:Npn \chaptermark#1 { \markboth { \bool_if:NTF \l__uppercase_bool {\text_uppercase:n {\l__fancyhf_chap_mark_tl#1}} {\text_titlecase_first:n {\l__fancyhf_chap_mark_tl#1}} }{} } \l__fancyhf_content_tl \cs_gset_eq:NN \ps@plain\ps@empty } \cs_gset:Npn \sectionmark#1 { \markright { \bool_if:NTF \l__uppercase_bool {\text_uppercase:n {\l__fancyhf_sec_mark_tl#1}} {\text_titlecase_first:n {\l__fancyhf_sec_mark_tl#1}} } } \bool_if:NT \l__draft_bool { \bool_if:NTF \l__page_twoside_bool {\easyfoot[C]{\color{gray!60}\sffamily\today}} {\easyhead[L]{\color{gray!60}\sffamily\today}} \geometry{showframe} } } \seq_const_from_clist:Nn \c__toc_headings_level_seq {part,chapter,section,subsection,lists} \seq_map_inline:Nn \c__toc_headings_level_seq { \ctex_define:n {tocset/#1 .meta:nn = {ctex/tocset/#1}{##1}} \__ctex_define:nn {tocset} { #1/format .tl_set:c = l__toc_#1_format_tl, #1/indent .tl_set:c = l__toc_#1_indent_tl, #1/rule .tl_set:c = l__toc_#1_rule_tl } } \__ctex_define:nn {tocset} { lists/lolskip .skip_set:N = \l__toc_lolskip_skip, lists/lolskip .initial:n = 0.8pc, lists/belowoffset .dim_set:N = \l__toc_listsoffset_dim, lists/belowoffset .initial:n = 0pc, belowoffset .dim_set:N = \l__toc_offset_dim, belowoffset .initial:n = -1pc } \ctex_set:nn {tocset} { part/format = \addvspace{1pc}\sffamily\large, part/indent = 0\ccwd, part/rule = \tocrule{}[\bfseries], chapter/format = \addvspace{1pc}\sffamily\large, chapter/indent = 0\ccwd, chapter/rule = \tocrule{$\cdot$}[\bfseries], section/format = \addvspace{0.35pc}, section/indent = 1.5\ccwd, section/rule = \tocrule{$\cdot$}, subsection/format = \addvspace{0.35pc}, subsection/indent = 3.8\ccwd, subsection/rule = \tocrule{$\cdot$}, lists/format = \addvspace{0.2pc}, lists/indent = 0\ccwd, lists/rule = \tocrule{$\cdot$} } \NewDocumentCommand{\tocrule}{O{0.7pc}D(){1.2}mO{}} { \normalsize\normalfont \titlerule*[#1]{\scalebox{#2}{#3}}#4\contentspage } \cs_new_protected:Npn \__titlecontents_set:nn #1#2 { \titlecontents{#1} [\use:c {l__toc_#2_indent_tl}] {\use:c {l__toc_#2_format_tl}}{}{} {\use:c {l__toc_#2_rule_tl}} } \contentsuse{lstlisting}{lol} \clist_map_inline:nn { {part}{part}, {chapter}{chapter}, {section}{section}, {subsection}{subsection}, {figure}{lists}, {table}{lists}, {lstlisting}{lists} }{\__titlecontents_set:nn #1} \ctex_patch_cmd:Nnn \caption@@@addcontentsline {\addcontentsline{#1}{#2}{\protect\numberline{#3}{#4}}} {\addcontentsline{#1}{#2}{#3\hspace{\list@labelsep}#4}} \ctex_patch_cmd:Nnn \lst@MakeCaption { \addcontentsline{lol}{lstlisting} {\protect\numberline{\thelstlisting}\lst@@caption} }{ \addcontentsline{lol}{lstlisting} {\thelstlisting\hspace{\list@labelsep}\lst@@caption} } \__appto_cmd:Nn \@chapter { \skip_if_eq:nnF {\l__toc_lolskip_skip}{\c_zero_skip} { \addtocontents{lol} {\protect\addvspace{\skip_use:N \l__toc_lolskip_skip}} } \bool_if:NF \l__class_book_bool {\msg_error:nn {easybook}{no-chapter}} } \__appto_cmd:Nn \@schapter { \bool_if:NF \l__class_book_bool {\msg_error:nn {easybook}{no-chapter}} } \msg_new:nnn {easybook}{no-chapter} { Your~document~class~is~in~article~mode. \\ The~\string\chapter\space~command~will~not~be~used. } \cs_new_protected:Npn \__markboth:n #1 { \bool_if:NTF \l__page_twoside_bool { \markboth { \bool_if:NTF \l__uppercase_bool {\text_uppercase:n {#1}} {\text_titlecase_first:n {#1}} }{ \bool_if:NTF \l__uppercase_bool {\text_uppercase:n {#1}} {\text_titlecase_first:n {#1}} } }{ \markboth { \bool_if:NTF \l__uppercase_bool {\text_uppercase:n {#1}} {\text_titlecase_first:n {#1}} }{} } } \tl_set:Nn \l__toc_type_tl{book} \keys_define:nn {listoc} { article .code:n = \tl_set:Nn \l__toc_type_tl{article}, book .code:n = {}, multoc .bool_set:N = \l__multoc_bool, multoc .default:n = true, multoc .initial:n = false } \cs_new_protected:Npn \__title_mark_intoc:n #1 { \tl_if_eq:NnTF \l__toc_type_tl{book} { \chapter*{\phantomsection#1} \CTEX@addtocline{chapter}{#1} }{ \section*{\phantomsection#1} \CTEX@addtocline{section}{#1} } \__markboth:n {#1} } \cs_new_protected:Npn \__title_mark:n #1 { \tl_if_eq:NnTF \l__toc_type_tl{book} {\chapter*{\phantomsection#1}} {\section*{\phantomsection#1}} \__markboth:n {#1} } \cs_new_protected:Npn \__ifmultoc_pre_set: { \bool_if:NTF \l__class_book_bool { \if@twocolumn \@restonecoltrue \bool_if:NTF \l__multoc_bool{\twocolumn}{\onecolumn} \else \@restonecolfalse \bool_if:NT \l__multoc_bool{\twocolumn} \fi }{\tl_set:Nn \l__toc_type_tl{article}} } \cs_new_protected:Npn \__ifmultoc_after_set: { \bool_if:NTF \l__class_book_bool { \if@restonecol \twocolumn \else \onecolumn \fi }{\tl_set:Nn \l__toc_type_tl{article}} } \RenewDocumentCommand{\tableofcontents}{o} { \group_begin: \IfValueT{#1}{\keys_set:nn {listoc}{#1}} \__ifmultoc_pre_set: \__title_mark:n {\contentsname} \vspace*{\dim_use:N \l__toc_offset_dim} \@starttoc{toc} \__ifmultoc_after_set: \group_end: } \RenewDocumentCommand{\listoffigures}{so} { \group_begin: \IfValueT{#2}{\keys_set:nn {listoc}{#2}} \__ifmultoc_pre_set: \IfBooleanTF{#1} {\__title_mark:n {\listfigurename}} {\__title_mark_intoc:n {\listfigurename}} \dim_add:NV \l__toc_offset_dim\l__toc_listsoffset_dim \vspace*{\dim_use:N \l__toc_offset_dim} \@starttoc{lof} \__ifmultoc_after_set: \group_end: } \RenewDocumentCommand{\listoftables}{so} { \group_begin: \IfValueT{#2}{\keys_set:nn {listoc}{#2}} \__ifmultoc_pre_set: \IfBooleanTF{#1} {\__title_mark:n {\listtablename}} {\__title_mark_intoc:n {\listtablename}} \dim_add:NV \l__toc_offset_dim\l__toc_listsoffset_dim \vspace*{\dim_use:N \l__toc_offset_dim} \@starttoc{lot} \__ifmultoc_after_set: \group_end: } \NewDocumentCommand{\listoflistings}{so} { \group_begin: \IfValueT{#2}{\keys_set:nn {listoc}{#2}} \__ifmultoc_pre_set: \IfBooleanTF{#1} {\__title_mark:n {\lstlistlistingname}} {\__title_mark_intoc:n {\lstlistlistingname}} \dim_add:NV \l__toc_offset_dim\l__toc_listsoffset_dim \vspace*{\dim_use:N \l__toc_offset_dim} \@starttoc{lol} \__ifmultoc_after_set: \group_end: } \makeindex[ intoc, options = -M~texindy~-C~utf8, program = truexindy, columns = 2, columnsep = 2\ccwd ] \indexsetup { level = \bool_if:NTF \l__class_book_bool{\chapter*}{\section*}, toclevel = \bool_if:NTF \l__class_book_bool{chapter}{section}, firstpagestyle = \bool_if:NTF \l__class_book_bool{plain}{fancy} } \__patch_cmd:Nnn \imki@indexheaders {\@mkboth{\MakeUppercase\indexname}{\MakeUppercase\indexname}} {\__markboth:n {\indexname}} \tl_new:N \l__font_table_tl \tl_new:N \l__font_figure_tl \tl_new:N \l__font_listing_tl \tl_new:N \l__font_footnote_tl \__ctex_define:nn {elsefont} { table-cap .tl_set:N = \l__font_table_tl, table-cap .initial:n = \sffamily\small, figure-cap .tl_set:N = \l__font_figure_tl, figure-cap .initial:n = \sffamily\small, listing-cap .tl_set:N = \l__font_listing_tl, listing-cap .initial:n = \sffamily\small, footnote .tl_set:N = \l__font_footnote_tl, footnote .initial:n = \rmfamily, marginpar .tl_set:N = \marginfont, marginpar .initial:n = \rmfamily\footnotesize } \DeclareCaptionLabelSeparator{ccwd}{\hspace{\ccwd}} \DeclareCaptionLabelFormat{parens}{\bothIfFirst{#1}{~}(#2)} \DeclareCaptionFont{table@font}{\l__font_table_tl} \DeclareCaptionFont{figure@font}{\l__font_figure_tl} \DeclareCaptionFont{listing@font}{\l__font_listing_tl} \captionsetup { format = hang, % figurewithin = section, % tablewithin = section, font = {stretch = {\fp_use:N \l__spread_caption_fp}}, labelfont = {color = ctex@frame}, labelsep = ccwd, singlelinecheck = true, belowskip = 0pt,aboveskip = 10pt } \captionsetup[table]{font += table@font} \captionsetup[figure]{font += figure@font} \captionsetup[lstlisting]{font += listing@font} \captionsetup[subfigure] { labelformat = parens, font += figure@font, belowskip = 2pt,aboveskip = 6pt } \ctex_at_end_package:nn {bicaption} { \captionsetup[figure][bi-second]{name = Figure} \captionsetup[table][bi-second]{name = Table} } \cs_new:Npn \__arabic:n #1{\int_to_arabic:v {c@#1}} \cs_new_protected:Npn \__separator_set:n #1 { \cs_set:cpn {the#1} { \int_compare:nT {\c@chapter > 0} { \thechapter \use:c {l__#1_separator_tl} } \__arabic:n {#1} } } \cs_gset:cpn {thesection} { \int_compare:nT {\c@chapter > 0}{\thechapter.} \__arabic:n {section} } \clist_map_inline:nn {figure,table,lstlisting,equation} {\__separator_set:n {#1}} \cs_gset_protected:Npn \appendix { \int_compare:nNnTF {\c@chapter} > {0} { \setcounter{chapter}{0} \setcounter{section}{0} \gdef\thechapter{\@Alph\c@chapter} \gdef\CTEX@prechapter{\CTEX@preappendix} \gdef\CTEX@thechapter{\CTEX@appendix@number} \gdef\CTEX@postchapter{\CTEX@postappendix} \gdef\CTEX@chapter@numbering{\CTEX@appendix@numbering} }{ \setcounter{section}{0} \setcounter{subsection}{0} \gdef\thesection{\@Alph\c@section} \gdef\CTEX@presection{\CTEX@preappendix} \gdef\CTEX@thesection{\CTEX@appendix@number} \gdef\CTEX@postsection{\CTEX@postappendix} \gdef\CTEX@section@numbering{\CTEX@appendix@numbering} \ctex_set:nn {appendix}{number = {\@Alph\c@section},name = {}} } } \AtBeginEnvironment{tabularx} { \exp_args:Nx \linespread{\fp_use:N \l__spread_table_fp} \selectfont\ignorespaces } \AtBeginEnvironment{tabular} { \exp_args:Nx \linespread{\fp_use:N \l__spread_table_fp} \selectfont\ignorespaces } \ctex_after_end_preamble:n { \exp_args:Nx \linespread{\fp_use:N \l__spread_line_fp} \selectfont\ignorespaces } \fp_new:N \l__spread_line_fp \fp_new:N \l__spread_table_fp \fp_new:N \l__spread_math_fp \fp_new:N \l__spread_caption_fp \fp_new:N \l__spread_footnote_fp \__ctex_define:nn {spread} { line .fp_set:N = \l__spread_line_fp, line .initial:n = 1.3, table .fp_set:N = \l__spread_table_fp, table .initial:n = 1.05, math .fp_set:N = \l__spread_math_fp, math .initial:n = 1.05, caption .fp_set:N = \l__spread_caption_fp, caption .initial:n = 1, footnote .fp_set:N = \l__spread_footnote_fp, footnote .initial:n = 1 } \skip_set:Nn \parskip{0pt plus 2pt minus 1pt} \skip_set:Nn \floatsep{12pt plus 2pt minus 2pt} \skip_set:Nn \intextsep{14pt plus 2pt minus 2pt} \skip_set:Nn \textfloatsep{16pt plus 2pt minus 4pt} \skip_set:Nn \dbltextfloatsep{16pt plus 2pt minus 4pt} \skip_set:Nn \@fpsep{8pt plus 2.0fil} \setcounter{topnumber}{4} \setcounter{bottomnumber}{4} \setcounter{totalnumber}{8} \cs_gset:Npn \textfraction{0.18} \cs_gset:Npn \topfraction{0.85} \cs_gset:Npn \bottomfraction{0.65} \cs_gset:Npn \floatpagefraction{0.60} \newcolumntype{L}{X} \newcolumntype{C}{>{\centering\arraybackslash}X} \newcolumntype{R}{>{\raggedleft\arraybackslash}X} \graphicspath{{figures/}} \DeclareGraphicsExtensions{.pdf,.png,.jpg,.eps,.tif} \setlist { labelsep = .75\ccwd,listparindent = 2\ccwd, itemsep = .75ex plus .1ex,topsep = .75ex plus .1ex, partopsep = 0ex,parsep = 0ex } \newlist{outlinelist}{itemize}{1} \setlist[outlinelist] { label = \color{ctex@emph}\upshape\ding{111}, itemsep = .5ex plus .1ex,leftmargin = * } \setlist[itemize,1] {label = \color{ctex@emph}\ensuremath{\bullet},leftmargin = *} \setlist[itemize,2] {label = \color{ctex@emph}\ensuremath{\circ},leftmargin = *} \setlist[enumerate,1] {label = \color{ctex@emph}\arabic*.,ref = \arabic*,leftmargin = *} \setlist[enumerate,2] {label = \color{ctex@emph}(\alph*),ref = \theenumi(\alph*),leftmargin = *} \setlist[description] {font = \color{ctex@emph}\sf,labelwidth = *,leftmargin = 2\ccwd} \cs_new_protected:Npn \__thmname_set:nn #1#2 {\tl_const:cn {c__name_#1_tl}{#2}} \bool_if:NTF \l__lang_chinese_bool { \clist_map_inline:nn { {theorem}{定理}, {definition}{定义}, {lemma}{引理}, {corollary}{推论}, {proposition}{性质}, {example}{例}, {remark}{注}, {exercise}{练习} }{\__thmname_set:nn #1} }{ \clist_map_inline:nn { {theorem}{Theorem}, {definition}{Definition}, {lemma}{Lemma}, {corollary}{Corollary}, {proposition}{Proposition}, {example}{Example}, {remark}{Remark}, {exercise}{Exercise} }{\__thmname_set:nn #1} } \bool_new:N \l__thmbox_bool \tl_new:N \l__thm_numberwith_tl \tl_new:N \l__thm_headpunct_tl \tl_new:N \l__thm_bodyfont_tl \tl_new:N \l__thm_notefont_tl \tl_new:N \l__thm_headindent_tl \tl_new:N \l__thm_spaceabove_tl \tl_new:N \l__thm_spacebelow_tl \RenewDocumentCommand{\newtheorem}{O{}m} {\AfterPreamble{\declaretheorem[#1]{#2}}} \__ctex_define:nn {thmset} { thmbox .bool_set:N = \l__thmbox_bool, thmbox .default:n = true, thmbox .initial:n = false, numberwith .tl_set:N = \l__thm_numberwith_tl, numberwith .initial:n = {chapter}, headpunct .tl_set:N = \l__thm_headpunct_tl, headpunct .initial:n = {}, bodyfont .tl_set:N = \l__thm_bodyfont_tl, bodyfont .initial:n = {}, notefont .tl_set:N = \l__thm_notefont_tl, notefont .initial:n = {}, headfont .tl_set:N = \l__thm_headfont_tl, headfont .initial:n = {\color{ctex@emph}\sffamily}, headindent .tl_set:N = \l__thm_headindent_tl, headindent .initial:n = {0\ccwd}, spaceabove .tl_set:N = \l__thm_spaceabove_tl, spaceabove .initial:n = {.75ex plus .1ex}, spacebelow .tl_set:N = \l__thm_spacebelow_tl, spacebelow .initial:n = {.75ex plus .1ex}, spacepost .tl_set:N = \l__thm_spacepost_tl, spacepost .initial:n = {\ccwd} } \ctex_at_end_preamble:n { \declaretheoremstyle[ spaceabove = \l__thm_spaceabove_tl, spacebelow = \l__thm_spacebelow_tl, headindent = \l__thm_headindent_tl, headfont = \l__thm_headfont_tl, notefont = \l__thm_notefont_tl, notebraces = {}{}, bodyfont = \l__thm_bodyfont_tl, headpunct = \l__thm_headpunct_tl, postheadspace = \l__thm_spacepost_tl, numberwithin = \l__thm_numberwith_tl, headformat = \NAME\space\NUMBER\NOTE ]{mythm} \declaretheorem[style = mythm,name = \c__name_theorem_tl]{theorem} \declaretheorem[style = mythm,name = \c__name_definition_tl]{definition} \declaretheorem[style = mythm,name = \c__name_lemma_tl]{lemma} \declaretheorem[style = mythm,name = \c__name_corollary_tl]{corollary} \declaretheorem[style = mythm,name = \c__name_proposition_tl]{proposition} \declaretheorem[style = mythm,name = \c__name_example_tl]{example} \cs_gset_eq:NN \proof\relax \declaretheorem{remark}[ style = mythm, name = \c__name_remark_tl, numbered = no ] \declaretheorem{proof}[ style = mythm, name = \proofname, numbered = no, qed = \qedsymbol ] } \settasks { label = (\Alph*), after-item-skip = 0ex plus .1ex, column-sep = .5\ccwd, item-indent = 2\ccwd, label-width = 1.5\ccwd } \setchemformula { math-scripts = false, charge-hshift = 0.25\ccwd, subscript-vshift = -0.2ex } \sisetup { detect-family, detect-weight, detect-shape, detect-inline-family = math, detect-inline-weight = math, detect-display-math, range-phrase = \ensuremath{\sim}, range-units = single, table-parse-only, group-digits = false } \allowdisplaybreaks[4] \cs_gset:Npn \ULthickness{.75pt} \skip_set:Nn \jot{4pt plus 1pt minus 1pt} \cs_new_protected:Npn \l__math_restore:n #1 { \AtBeginEnvironment{#1} {\linespread{\fp_use:N \l__spread_math_fp}\selectfont\ignorespaces} } \clist_map_inline:nn { array,matrix,pmatrix,bmatrix,Bmatrix,vmatrix,Vmatrix, matrix*,pmatrix*,bmatrix*,Bmatrix*,vmatrix*,Vmatrix*, cases,cases*,dcases,dcases*,rcases,rcases*,drcases,drcases*, aligned,alignedat,gathered,multlined,lgathered,rgathered }{\l__math_restore:n {#1}} \__patch_cmd:Nnn \start@gather {\collect@body} {\linespread{\fp_use:N \l__spread_math_fp}\selectfont\collect@body} \__patch_cmd:Nnn \start@align {\collect@body} {\linespread{\fp_use:N \l__spread_math_fp}\selectfont\collect@body} \__patch_cmd:Nnn \start@multline {\collect@body} {\linespread{\fp_use:N \l__spread_math_fp}\selectfont\collect@body} \__patch_cmd:Nnn \gather@split {\spread@equation} {\linespread{\fp_use:N \l__spread_math_fp}\selectfont\spread@equation} \ctex_after_end_preamble:n { \skip_set:Nn \abovedisplayskip{5pt plus 1pt minus 1pt} \skip_set:Nn \belowdisplayskip{5pt plus 1pt minus 1pt} \skip_set:Nn \abovedisplayshortskip{0pt} \skip_set:Nn \belowdisplayshortskip{5pt plus 1pt minus 1pt} } \cs_gset:Npn \tagform@#1 {\maketag@@@{\color{ctex@emph}(\ignorespaces#1\unskip\@@italiccorr)}} \ctex_at_end_package:nn {tcolorbox} { \__ifpackage_later:nn {tcolorbox}{2020/10/09} \tcbset { thmsty/.style = { enhanced~jigsaw,pad~at~break* = 3pt, opacityback = 0, colframe = ctex@emph, left = .2pc,right = .2pc,top = .5pc,bottom = .5pc,middle= .5pc, arc = 0pt }, outlinesty/.style = { enhanced,nofloat, tikznode~boxed~title, interior~style = white,colframe = ctex@emph, colbacktitle = white,coltitle = ctex@emph, fonttitle = \large\sffamily,fontupper = \itshape, boxed~title~style = {size = normal,opacityframe = 0,boxrule = 0pt}, attach~boxed~title~to~top~center = {yshift = -\tcboxedtitleheight/2}, arc = 3pt, after~skip = 3ex, left = 1.5pc,right = 1.5pc,top = 1pc,bottom = 0.5pc, boxsep = 5pt }, exersty/.style = { enhanced,on~line, arc = 5pt, fontupper = \sffamily\Large, boxrule = 1pt,boxsep = 0pt, left = 6pt,right = 6pt,top = 3.5pt,bottom = 3.5pt, before~skip = 4ex,after~skip = 2.25ex }, breakable, boxrule = \l__rule_width_dim } \NewDocumentEnvironment{outline}{D(){\abstractname}o+b} { \begin{tcolorbox}[outlinesty,title = #1,IfValueT = {#2}{#2}] \begin{outlinelist} #3 \end{outlinelist} \end{tcolorbox} }{} \NewDocumentEnvironment{exercise} {sO{LightYellow}O{1.}D(){\c__name_exercise_tl}o+b} { \begin{center} \bool_if:NTF \l__thmbox_bool { \tcbox[ exersty, colback = #2,colframe = black, drop~fuzzy~shadow = #2, IfValueT = {#5}{#5}, phantom = \IfBooleanF{#1} { \CTEX@ifnametrue \refstepcounter{section} \markright{\CTEXthesection\hspace{0.5\ccwd}#4} \CTEX@addtocline{section}{#4} } ]{\IfBooleanF{#1}{\CTEXthesection\hspace{0.5\ccwd}}#4} }{ \sffamily\Large \IfBooleanF{#1} { \CTEX@ifnametrue \refstepcounter{section} \markright{\CTEXthesection\hspace{0.5\ccwd}#4} \CTEX@addtocline{section}{#4} \CTEXthesection\hspace{0.5\ccwd} }#4 } \end{center} \begin{enumerate}[#3,labelsep = 0.5\ccwd] #6 \end{enumerate} }{} \DeclareTColorBox{mybox}{sO{MintCream}d()O{}} { enhanced~jigsaw,pad~at~break* = 3pt, IfBooleanTF = {#1}{colback = #2}{opacityback = 0,colframe = ctex@emph}, IfValueT = {#3}{title = #3}, coltitle = black,colbacktitle = white, fonttitle = \sffamily, left = .2pc,right = .2pc,top = .5pc,bottom = .5pc,middle= .5pc, arc = 0pt, toptitle = 2pt,bottomtitle = 2pt, beforeafter~skip=2ex, halign~upper = left,halign~lower = left, center~title,#4 } \DeclareTotalTCBox{\fuzzy}{O{DarkSeaGreen}vO{}} { nobeforeafter,tcbox~raise~base, blank,fuzzy~halo = 2pt~with~#1,#3 }{#2} \DeclareTotalTCBox{\concise}{O{Aqua}vO{}} { nobeforeafter,tcbox~raise~base, top = 2pt,bottom = 2.5pt,left = 2pt,right = 2pt, boxsep = 0pt,boxrule = 0.75pt,arc = 1pt, colback = #1!15!white,#3 }{#2} } \ctex_at_end_preamble:n { \bool_if:NT \l__thmbox_bool { \@ifpackageloaded{tcolorbox} { \tcolorboxenvironment{theorem}{thmsty} \tcolorboxenvironment{definition}{thmsty} \tcolorboxenvironment{lemma}{thmsty} \tcolorboxenvironment{corollary}{thmsty} \tcolorboxenvironment{proposition}{thmsty} \tcolorboxenvironment{example}{thmsty} }{} } } \bool_set_true:N \l__backend_bibtex_bool \tl_new:N \l__bib_style_tl \tl_new:N \l__bib_otherstyle_tl \tl_new:N \l__bib_citestyle_tl \tl_new:N \l__bib_file_tl \__ctex_define:nn {bibset} { backend .choice:, backend/bibtex .code:n = {}, backend/biblatex .code:n = {\bool_set_false:N \l__backend_bibtex_bool}, bib-style .choice:, bib-style .value_required:n = true, bib-style/numerical .code:n = { \tl_set:Nn \l__bib_style_tl{#1} \tl_clear:N \l__bib_otherstyle_tl }, bib-style/authoryear .code:n = { \tl_set:Nn \l__bib_style_tl{#1} \tl_clear:N \l__bib_otherstyle_tl }, bib-style/unknown .code:n = {\tl_set_eq:NN \l__bib_otherstyle_tl\l_keys_value_tl}, bib-style .initial:n = numerical, cite-style .code:n = {\tl_set:Nn \l__bib_citestyle_tl{#1}}, bibfile .tl_set:N = \l__bib_file_tl, bibfile .initial:n = refs.bib } \cs_new_protected:Npn \__bibtex_set: { \tl_if_empty:NTF \l__bib_otherstyle_tl { \tl_if_eq:VnT \l__bib_style_tl{numerical} { \bibliographystyle{gbt7714-numerical} \setcitestyle{comma,square,super} } \tl_if_eq:VnT \l__bib_style_tl{authoryear} {\bibliographystyle{gbt7714-author-year}} \cs_set_eq:NN \cite\citep }{ \exp_args:NV \bibliographystyle\l__bib_otherstyle_tl } \tl_if_empty:NF \l__bib_citestyle_tl {\exp_args:NV \setcitestyle\l__bib_citestyle_tl} \skip_set:Nn \bibsep{0ex} \NewDocumentCommand{\printbibliography}{so} { \group_begin: \IfValueT{##2}{\keys_set:nn {listoc}{##2}} \__ifmultoc_pre_set: \cs_set:Npn \bibsection { \IfBooleanTF{##1} {\__title_mark:n {\bibname}} {\__title_mark_intoc:n {\bibname}} } \exp_args:NV \bibliography\l__bib_file_tl \__ifmultoc_after_set: \group_end: } } \cs_new_protected:Npn \__put_biblatex:n #1 {\PassOptionsToPackage{#1}{biblatex}} \cs_new_protected:Npn \__biblatex_pre_set: { \tl_if_empty:NTF \l__bib_otherstyle_tl { \tl_if_eq:VnT \l__bib_style_tl{numerical} {\__put_biblatex:n {style = gb7714-2015}} \tl_if_eq:VnT \l__bib_style_tl{authoryear} {\__put_biblatex:n {style = gb7714-2015ay}} }{\__put_biblatex:n {style = \l__bib_otherstyle_tl}} \tl_if_empty:NF \l__bib_citestyle_tl {\__put_biblatex:n {citestyle = \l__bib_citestyle_tl}} \__put_biblatex:n {backend = biber} } \cs_new_protected:Npn \__biblatex_after_set: { \exp_args:NV \addbibresource\l__bib_file_tl \cs_gset:Npn \blx@default@theheading{bibintoc} \defbibheading{bibintoc}[\bibname]{\__title_mark_intoc:n {##1}} \skip_set:Nn \bibitemsep{0ex} } \ctex_at_end_preamble:n { \bool_if:NTF \l__backend_bibtex_bool { \RequirePackage[sort&compress]{natbib} \__bibtex_set: }{ \__biblatex_pre_set: \RequirePackage{biblatex} \__biblatex_after_set: } } \ctex_at_end_preamble:n { \group_begin: \footnotesize \exp_args:Nx \linespread{\fp_use:N \l__spread_footnote_fp}\selectfont \skip_gset:Nn \footnotesep{\ht\strutbox} \group_end: \bool_if:NT \l__chap_withpart_bool {\counterwithin*{chapter}{part}} \tl_if_eq:NnT \l__foot_numberwith_tl{part} { \counterwithout*{footnote}{chapter} \counterwithin*{footnote}{part} } \tl_if_eq:NnT \l__foot_numberwith_tl{page} { \counterwithout*{footnote}{chapter} \counterwithin*{footnote}{page} } } \__patch_cmd:Nnn \@footnotetext {\reset@font} {\def\baselinestretch{\fp_use:N \l__spread_footnote_fp}\l__font_footnote_tl} \__patch_cmd:Nnn \@mpfootnotetext {\reset@font} {\def\baselinestretch{\fp_use:N \l__spread_footnote_fp}\l__font_footnote_tl} \__patch_cmd:Nnn \@makefnmark {\normalfont}{\l__font_footnote_tl} \lstdefinestyle{mystyle} { language = [LaTeX]TeX, texcsstyle = *\lst@ifdisplaystyle\bfseries\color{ctex@verb}\else\color{ctex@verb}\fi, basicstyle = \ttfamily\lst@ifdisplaystyle\small\else\color{ctex@verb}\fi, framexleftmargin = 0pt, framexrightmargin = 0pt, xleftmargin = 3pt, xrightmargin = 3pt, numbersep = 10pt, framesep = 3pt, frame = single, rulecolor = \color{ctex@frame}, commentstyle = \color{gray}, emphstyle = \color{ctex@emph}, emph = {caption,makecell,subcaption,tabularx}, keywordstyle = \lst@ifdisplaystyle\bfseries\color{ctex@verb}\else\color{ctex@verb}\fi, morekeywords = { includegraphics,setmainfont,setsansfont,setmonofont,setCJKmainfont,setCJKsansfont,setCJKmonofont,setCJKfamilyfont,RequirePackage } } \lstset { style = mystyle, breaklines = true, resetmargins = true, % numbers = left, numberstyle = \footnotesize, abovecaptionskip = -1ex, belowcaptionskip = 1.5ex, aboveskip = 1.5ex plus .2ex minus .1ex, belowskip = 0.55ex plus .2ex minus .1ex, keepspaces = true, framerule = \l__rule_width_dim, columns = flexible } \lstloadlanguages{C,C++,Java,Python,Matlab} \clist_new:N \l__hyperref_clist \cs_new_protected:Npn \__put_hyperref:n #1 {\clist_put_right:Nn \l__hyperref_clist{#1}} \cs_new_protected:Npn \__define_linkcolor:nnn #1#2#3 {\definecolorset{HTML}{ctex@}{}{link,#1;url,#2;cite,#3}} \cs_new_protected:Npn \__define_themecolor:nnn #1#2#3 {\definecolorset{HTML}{ctex@}{}{frame,#1;emph,#2;verb,#3}} \cs_new:Npn \__linkcolor_set:n #1 { linkcolor/\clist_item:nn {#1}{1} .code:n = { \__define_linkcolor:nnn {\clist_item:nn {#1}{2}} {\clist_item:nn {#1}{3}} {\clist_item:nn {#1}{4}} \__put_hyperref:n { linkcolor = ctex@link,linkbordercolor = ctex@link, urlcolor = ctex@url,urlbordercolor = ctex@url, citecolor = ctex@cite,citebordercolor = ctex@cite } }, } \cs_new:Npn \__themecolor_set:n #1 { color/\clist_item:nn {#1}{1} .code:n = { \__define_themecolor:nnn {\clist_item:nn {#1}{2}} {\clist_item:nn {#1}{3}} {\clist_item:nn {#1}{4}} }, } \cs_new:Npn \__allow_urlbreak: { \cs_new:Npn \__add_urlbreak_points: {\tl_map_function:NN \c__urlbreak_points_tl\do} \__appto_cmd:Nn \UrlBreaks{\UrlOrds\__add_urlbreak_points:} } \tl_const:Nn \c__urlbreak_points_tl {ABCDEFGHIJKLMNOPQRSTUVWXYZabcdefghijklmnopqrstuvwxyz0123456789} \keys_define:nx {ctex/link} { hyperlink .choice:, hyperlink/edge .code:n = {}, hyperlink/various .code:n = {\__put_hyperref:n {colorlinks}}, hyperlink/none .code:n = {\__put_hyperref:n {hidelinks}}, hyperlink .default:n = edge, hyperlink .initial:n = edge, linkcolor .choice:, \clist_map_function:nN { {fresh, 62d71f,0000B2,005752}, {cutepink, ff69b4,9d5196,57b5e5}, {skyblue, 0000ff,004986,eb6877}, {crimson, dc143c,00c1c9,afcd20} } \__linkcolor_set:n linkcolor .default:n = fresh, linkcolor .initial:n = fresh, linktopage .choice:, linktopage/true .code:n = {\__put_hyperref:n {linktocpage}}, linktopage/false .code:n = {}, linktopage .default:n = true, linktopage .initial:n = false } \keys_define:nx {ctex/style} { color .choice:, color .value_required:n = true, \clist_map_function:nN { {none, 000000,000000,000000}, {seaside, 4682B4,004986,a40000}, {energy, f39800,00a0e9,893895}, {cyberpunk, 601986,eb6877,a4005b} } \__themecolor_set:n color .initial:n = none } \ctex_at_end_preamble:n { \RequirePackage{hyperref,cleveref} \urlstyle{same} \__allow_urlbreak: \ctex_hypersetup:n {pdfstartview = FitH,bookmarksnumbered} \exp_args:NV \hypersetup\l__hyperref_clist \bool_if:NTF \l__lang_chinese_bool { \keys_set_known:nn {ctex} { contentsname = {目\hspace{\ccwd}录}, indexname = {索\hspace{\ccwd}引}, listfigurename = {图片索引}, listtablename = {表格索引}, abstractname = {摘\hspace{\ccwd}要}, lstlistlistingname = {代码索引}, lstlistingname = {代码} } \crefformat{equation}{#2式(#1)#3} \crefformat{align}{#2式(#1)#3} \crefformat{multline}{#2式(#1)#3} \crefformat{gather}{#2式(#1)#3} \crefformat{figure}{#2图#1#3} \crefformat{table}{#2表#1#3} \crefformat{chapter}{#2第#1章#3} \crefformat{section}{#2节#1#3} \crefformat{subsection}{#2小节#1#3} \crefformat{theorem}{#2定理#1#3} \crefformat{definition}{#2定义#1#3} \crefformat{lemma}{#2引理#1#3} \crefformat{corollary}{#2推论#1#3} \crefformat{proposition}{#2性质#1#3} \crefformat{example}{#2例#1#3} }{ \keys_set_known:nn {ctex} { abstractname = {Abstract}, lstlistlistingname = {List~of~Listings}, lstlistingname = {Code} } \crefformat{equation}{#2Equation~(#1)#3} \crefformat{align}{#2Equation~(#1)#3} \crefformat{multline}{#2Equation~(#1)#3} \crefformat{gather}{#2Equation~(#1)#3} \crefformat{figure}{#2Figure~#1#3} \crefformat{table}{#2Table~#1#3} \crefformat{chapter}{#2Chapter~#1#3} \crefformat{section}{#2Section~#1#3} \crefformat{subsection}{#2Subsection~#1#3} \crefformat{theorem}{#2Theorem~#1#3} \crefformat{definition}{#2Definition~#1#3} \crefformat{lemma}{#2Lemma~#1#3} \crefformat{corollary}{#2Corollary~#1#3} \crefformat{proposition}{#2Proposition~#1#3} \crefformat{example}{#2Example~#1#3} } } \ctex_set:n { secnumdepth = 3, tocdepth = 1, part = { pagestyle = empty, number = {\bool_if:NTF \l__zhtitle_bool{\chinese{part}}{\thepart}}, format = {\color{ctex@frame}\sffamily\Huge}, aftername = {\bool_if:NTF \l__newline_bool{\par\nobreak}{\hspace{\ccwd}}}, tocline = {\CTEXifname{\CTEXthepart\hspace{\ccwd}}{}#2} }, chapter = { % pagestyle = fancy, number = {\bool_if:NTF \l__zhtitle_bool{\chinese{chapter}}{\thechapter}}, format = { \color{ctex@frame}\sffamily\LARGE \bool_if:NF \l__newline_bool{\centering} }, aftername = { \bool_if:NTF \l__newline_bool {\par\nobreak\vskip 1.5pc}{\hspace{\ccwd}} }, beforeskip = {-1.5ex}, afterskip = {3ex}, lotskip = {0.8pc}, lofskip = {0.8pc}, tocline = {\CTEXifname{\CTEXthechapter\hspace{\ccwd}}{}#2} }, section = { hang = true, format = {\color{ctex@frame}\sffamily\Large}, aftername = {\hspace{0.5\ccwd}}, beforeskip = {1.5ex plus .2ex minus .1ex}, afterskip = {1.5ex plus .2ex minus .1ex}, tocline = {\CTEXifname{\CTEXthesection\hspace{\ccwd}}{}#2} }, subsection = { hang = true, format = {\color{ctex@frame}\sffamily\large}, aftername = {\hspace{0.5\ccwd}}, beforeskip = {1.3ex plus .2ex minus .1ex}, afterskip = {1.3ex plus .2ex minus .1ex}, tocline = {\CTEXifname{\CTEXthesubsection\hspace{\ccwd}}{}#2} }, subsubsection = { hang = true, format = {\color{ctex@frame}\sffamily}, aftername = {\hspace{0.5\ccwd}}, beforeskip = {\parskip}, afterskip = {\parskip} } } \bool_if:NF \l__newline_bool { \ctex_set:n { part/hang = true, chapter/hang = true } } % % \Finale \endinput