% ^^A CTAN:macros/latex/contrib/supported/minutes
\def\fileversion{V1.5}
\def\filedate{2005/10/20}
% ^^A For index and changes, run:
% ^^A makeindex -s gglo -o blindtext.gls blindtext.glo
% ^^A makeindex -s gind -o blindtext.ind blindtext.idx
%
% \CheckSum{489}
%%
%% \CharacterTable
%%  {Upper-case    \A\B\C\D\E\F\G\H\I\J\K\L\M\N\O\P\Q\R\S\T\U\V\W\X\Y\Z
%%   Lower-case    \a\b\c\d\e\f\g\h\i\j\k\l\m\n\o\p\q\r\s\t\u\v\w\x\y\z
%%   Digits        \0\1\2\3\4\5\6\7\8\9
%%   Exclamation   \!     Double quote  \"     Hash (number) \#
%%   Dollar        \$     Percent       \%     Ampersand     \&
%%   Acute accent  \'     Left paren    \(     Right paren   \)
%%   Asterisk      \*     Plus          \+     Comma         \,
%%   Minus         \-     Point         \.     Solidus       \/
%%   Colon         \:     Semicolon     \;     Less than     \<
%%   Equals        \=     Greater than  \>     Question mark \?
%%   Commercial at \@     Left bracket  \[     Backslash     \\
%%   Right bracket \]     Circumflex    \^     Underscore    \_
%%   Grave accent  \`     Left brace    \{     Vertical bar  \|
%%   Right brace   \}     Tilde         \~}
%%
% \DoNotIndex{\" , \-, \flqq,\frqq, \ ,\def, \begin, \end}
% \DoNotIndex{\csname,\endcsname, \expandafter, \global, \newcommand}
% \DoNotIndex{\advance, \filedate, \fileversion, \MessageBreak}
% \DoNotIndex{\newcount, \newcounter, \newif, \or}
% \DoNotIndex{\if, \else, \fi, \ifcase, \ifdefined, \ifnum, \ifx, \loop, \repeat}
% \DoNotIndex{\heartsuit}
% \DoNotIndex{\NeedsTeXFormat, \providecommand, \ProvidesPackage, \relax, \RequirePackage}
% \DoNotIndex{\par, \chapter, \section, \subsection, \subsubsection, \paragraph, }
% \DoNotIndex{\selectlanguage, \stepcounter, \ss, \space, \setcounter}
% \DoNotIndex{\value, \typeout, \long, \renewcommand}
%
% \iffalse
%<*driver>
\documentclass{ltxdoc}
%\documentclass{refart}
%\usepackage{doc}
\usepackage[german,english]{babel}
\usepackage{blindtext}
\usepackage{makeidx}
\IfFileExists{hyperref.sty}{\usepackage{hyperref}}{}
\CodelineIndex
\makeindex
%\OnlyDescription
\begin{document}
 \DocInput{blindtext.dtx}
\end{document}
%</driver>
%
%<*package>
% \fi
%
% \newcommand*{\Lpack}[1]{\textsf {#1}}           ^^A typeset a package
% \newcommand*{\Lenv}[1]{\texttt {#1}}           ^^A typeset a package
%
% \title{Blindtext.sty:\\
%   Creating text for testing/
%   Texterzeugung zum testen}
%
% \author{Knut Lickert\\
%       \url{http://tex.lickert.net/packages/blindtext/}
% }
% \maketitle
%
%\begin{abstract}
%\selectlanguage{english}
%This packet create text with the commands \verb|\blindtext| and
%\verb|\Blindtext|.
%With this created text you can get an impression of the look
%of new classes and packages.
%
%\selectlanguage{german}
%Mit diesem Paket kann man lange Texte erzeugen, ohne lange
%Texte einzugeben.
%Sinn ist die Erzeugung langer Beispieltexte, ohne den
%Quelltext lang zu machen.
%\end{abstract}
%
%\selectlanguage{english}
%\section{Overview/{\"U}bersicht}
%\subsection{The commands/Die Kommandos}
%\begin{figure}
%\renewcommand{\arraystretch}{1.1}
%\begin{tabular}{p{0.3\textwidth}*{2}{p{0.3\textwidth}}}\hline
%Command/Makro       & englisch      & german    \\\hline
%\verb|\blinddocument|   & creates a document  & erzeugt ein Dokument\\
%\verb|\Blinddocument|   & creates a big document  & erzeugt ein gro{\ss}es Dokument\\
%\verb|\blindtext|   & creates text  & erzeugt Text\\
%\verb|\Blindtext|   & creates more text & erzeugt mehr Text\\
%\verb|\blindlist{env}|   & creates a list  & erzeugt eine Liste\\
%\verb|\blindlistoptional|\newline\hspace*{2em}\verb|{env}|   & creates a list with \verb|\item[]|  & erzeugt eine Liste mit \verb|\item[]|\\
%\verb|\blindlistlist[level]{env}|   & creates cascaded lists  & erzeugt geschachtelte Listen\\
%\verb|\Blindlist{env}|   & creates a big list  & erzeugt eine gro{\ss}e Liste\\
%\verb|\Blindlistoptional|\newline\hspace*{2em}\verb|{env}|   & creates a big list with \verb|\item[]|  & erzeugt eine gro{\ss}e Liste mit \verb|\item[]|\\
%\verb|\blinditemize|   & creates an itemize list  & erzeugt eine itemize-Liste\\
%\verb|\blindenumerate|   & creates an enumerate list  & erzeugt eine enume\-ra\-te-Liste\\
%\verb|\blinddescription|   & creates a description list  & erzeugt eine des\-crip\-tion-Liste\\\hline
%$\sim$[x]   & repetition & Wiederholungsfaktor\\
% ^^A%\verb|\lovetext|   & I love you in different languages & mehrsprachig: Ich liebe dich\\
%\end{tabular}
%\caption{Command Overview}
%\end{figure}
%
% \DescribeMacro{\blinddocument}
% {\verb|\blinddocument|} create a document with sections,
% subsections\ldots and lists (\Lenv{itemize},
% \Lenv{enumerate} and \Lenv{description}).
% \DescribeMacro{\Blinddocument}
% {\verb|\Blinddocument|} create a
% document with bigger sections, subsections\ldots and longer
% lists.\par
%
% The smallest document to check the look of a class would be:
% \begin{quote}
% \begin{verbatim}
% \documentclass{<class>}
% \usepackage{blindtext}
% \begin{document}
%     \blinddocument
% \end{document}
% \end{verbatim}
% \end{quote}
%
% \DescribeMacro{\blindtext}
% \verb|\blindtext[x]| create a text. The optional parameter defines a
% repetition. Default for the repetition is one and can be modified
% with \verb|\setcounter{blindtext}{1}|.
%
% \DescribeMacro{\Blindtext}
% {\verb|\Blindtext[x][y]|} create $x$ paragraphs with the text of
% {\verb|\blindtext|}. The first optional parameter defines a
% repetition of the paragraphs. Default for the repetition is five
% and can be modified with \verb|\setcounter{Blindtext}{5}|. The
% second optional parameter is given to \verb|\blindtext|.
%
% It is possible to add a start and end sequence for each paragraph.
%
% \DescribeMacro{\parstart}
% \DescribeMacro{\parend}
% The two macros \verb|\parstart| and \verb|\parend| define a
% starting and ending sequence for each paragraph in
% \verb|\Blindtext|.
%
% \DescribeMacro{\blindlist}
% {\verb|\blindlist{env}[x]|} create a list, the type is defined by the
% obligatory parameter. The optional parameter defines a repetition.
% Default for the repetition is five and can be modified with
% \verb|\setcounter{blindlist}{x}|.
%
% \DescribeMacro{\blindlistlist}
%  {\verb|\blindlistlist[level]{env}[x]|} creates cascaded lists up to
%  level \verb|level|, the type is defined by the second obligatory
%  parameter. The optional parameter defines a repetition. Default is the
%  same like in \verb|\blindlist|.
%
% \DescribeMacro{\Blindlist}
% \verb|\Blindlist{env}[x]| create a list with long texts. The optional parameter defines a
% repetition. Default for the repetition is five and can be modified
% with \verb|\setcounter{blindlist}{x}|.
%
% \DescribeMacro{\blindlistoptional}
% {\verb|\blindlistoptional{env}[x]|} create a list with \verb|\item[]|. The
% list is defined by the obligatory parameter. The optional
% parameter defines a repetition. Default for the repetition is five
% and can be modified with \verb|\setcounter{blindlist}{x}|.
%
% \DescribeMacro{\Blindlistoptional}
% \verb|\Blindlistoptional| create a list like
% \verb|\blindlistoptional| with long texts.
%
% \DescribeMacro{\blinditemize}     \DescribeMacro{\Blinditemize}
% \DescribeMacro{\blindenumerate}   \DescribeMacro{\Blindenumerate}
% \DescribeMacro{\blinddescription} \DescribeMacro{\Blinddescription}
% This commands are a abbreviation for \verb|\blindlist{itemize}|, \verb|\blindlist{enumerate}|
% and \verb|\blindlist{description}|.
%
% \StopEventually
%
% \selectlanguage{english}
% \section{Implementation/Implementierung}
%
%    \begin{macrocode}
\NeedsTeXFormat{LaTeX2e}
\ProvidesPackage{blindtext}[\filedate\space\fileversion\space%
                 blindtext-Package]
\RequirePackage{xspace}
%    \end{macrocode}
% Just in case the french quote are not defined
%    \begin{macrocode}
\providecommand{\frqq}{}
\providecommand{\flqq}{}
%    \end{macrocode}
%
% First we need some counters for the number of repetitions of the
% text and the paragraphs.
%    \begin{macrocode}
\newcounter{blindtext}\setcounter{blindtext}{1}
\newcounter{Blindtext}\setcounter{Blindtext}{5}
%    \end{macrocode}
%
%    \begin{macro}{\blindtext}
%
% \verb|\blindtext[x]| write $x\times$ a sentence.
% The default is stored in the counter \verb|blindtext|. This value
% can be changed with \verb|\setcounter{blindtext}{1}|.
%
%    \begin{macrocode}
\newcount\blind@countxx
\newcommand{\blindtext}[1][\value{blindtext}]{
\blind@countxx=1
\loop
\blindtext@text
\ifnum\blind@countxx<#1\advance\blind@countxx by 1
\repeat
}
%    \end{macrocode}
%    \end{macro}
%
%    \begin{macro}{\Blindtext}
% \verb|\Blindtext[x][y]| execute $x\times$\verb|\blindtext[y]|. Each
% \verb|\blindtext[y]| built a paragraph.
% The default is stored in the counter \verb|Blindtext|. This value
% can be changed with \verb|\setcounter{Blindtext}{5}|.
% The counter \verb|blindtext@numBlindtext| stores the first
% optional parameter to be used in \verb|\blindtext@Blindtext|.
%    \begin{macrocode}
\newcount\blindtext@numBlindtext
\newcommand{\Blindtext}[1][\value{Blindtext}]{
\blindtext@numBlindtext=#1
\blind@Blindtext}
%    \end{macrocode}
%    \end{macro} %^^ABlindtext
%
% \begin{macro}{\blind@Blindtext}
% This macro continue \verb|\Blindtext| with a second optional parameter.
%
% Each paragraph starts and end with a text, which can be defined with
% \verb|\starttext| or \verb|\endtext|.
%    \begin{macrocode}
\newcount\blind@countyy
\newcommand{\blind@Blindtext}[1][\value{blindtext}]{
\blind@countyy=1
\loop
{\blindtext@parstart\blindtext[#1]\blindtext@parend\par}
\ifnum\blind@countyy<\blindtext@numBlindtext\advance\blind@countyy by 1
\repeat
}
%    \end{macrocode}
% \end{macro}%^^A{\blind@Blindtext}
%
% \begin{macro}{\parstart}
% \begin{macro}{\parend}
%    \begin{macrocode}
\newcommand{\blindtext@parstart}{}   %Text at start of paragraph
\newcommand{\blindtext@parend}{}     %Text at end   of paragraph
\newcommand{\parstart}[1]{\renewcommand{\blindtext@parstart}{#1}}
\newcommand{\parend}[1]{\renewcommand{\blindtext@parend}{#1}}
%    \end{macrocode}
% \end{macro}%^^A{\parstart}
% \end{macro}%^^A{\parend}
%
% \section{Lists}
% Here I define some flags to decide in the lists, if we have to
% create big items and if we need the optional parameter at
% \verb|\item|. This flags are reset in \verb|\blind@list|.\par
% The counter \verb|blindlist| define the default number of items in a list.
% The counter \verb|blindlistitem| is needed by \verb|\blindtext@count|
% to write a text like 'first', 'second'\ldots.
%    \begin{macrocode}
\newif\ifblind@long\blind@longfalse
\newif\ifblind@optional\blind@optionalfalse
\newcounter{blindlist}
\newcounter{blindlistlevel}%Up tu X level
\newcounter{blindlist@level}%internal counter
\newcount\blind@listitem
%    \end{macrocode}
%
% \begin{macro}{\blindlist}
% \begin{macro}{\blind@listtype}
% \verb|\blindlist{env}[x]| write a env-list with $x$ items.
% The default is stored in the counter \verb|blindlist|. This value
% can be changed with \verb|\setcounter{blindlist}{1}|.
% The type of list is stored in \verb|\blind@listtype|.
%    \begin{macrocode}
%% ^^A-----------------------------------------------------------
\newcommand{\blindlist}[1]{
\def\blind@listtype{#1}
\setcounter{blind@levelcount}{1}
\blind@list
}
%    \end{macrocode}
% \end{macro}%^^A{\blindlist}
% \end{macro}%^^A{\blind@listtype}
%
% \begin{macro}{\blind@list}
% This macro continue the macro \verb|\blindlist| and with the
% optional parameter. After the printout, we reset the flags and the
% counter for the list text.
%    \begin{macrocode}
\newcommand{\blind@list}[1][5]{
\setcounter{blindlist}{#1}
\addtocounter{blindlist@level}{1}%depth of list
\blind@listitem=1
\begin{\blind@listtype}
\blind@items
\end{\blind@listtype}
\blind@longfalse
\blind@optionalfalse
}
%    \end{macrocode}
% \end{macro}%^^A{\blind@list}
%
% \begin{macro}{\blindlistlist}
% \verb|\blindlistlist[num]{env}[x]| writes cascaded lists up to level num.
%    \begin{macrocode}
\newcommand{\blindlistlist}[2][4]{
\setcounter{blindlistlevel}{#1}
\setcounter{blindlist@level}{0}%deepest reached level
\setcounter{blind@levelcount}{1}%actual level for printout
\def\blind@listtype{#2}
\blind@list
}
%    \end{macrocode}
% \end{macro}%^^A{\blindlistlist}
% \begin{macro}{\blindlistlistoptional}
% Like \verb|\blindlistlist[num]{env}[x]| but for environment with optional parameters.
%    \begin{macrocode}
\newcommand{\blindlistlistoptional}{
\blind@optionaltrue
\blindlistlist
}
%    \end{macrocode}
% \end{macro}%^^A{\blindlistlistoptional}
%
% \begin{macro}{\blinditemize}
% \begin{macro}{\blindenumerate}
% Some default macros for the standard environments.
%    \begin{macrocode}
\newcommand{\blinditemize}{\blindlist{itemize}}
\newcommand{\blindenumerate}{\blindlist{enumerate}}
%    \end{macrocode}
% \end{macro}%^^A{\blinditemize}
% \end{macro}%^^A{\blindenumerate}
%
% \verb|\Blindlist[x]| write a list with $x$ items.
% The default is stored in the counter \verb|blindlist|. This value
% can be changed with \verb|\setcounter{blindlist}{1}|.
%
%
% \begin{macro}{\Blindlist}
%    \begin{macrocode}
\newcommand{\Blindlist}[1]{
\blind@longtrue
\blindlist{#1}
}
%    \end{macrocode}
% \end{macro}%^^A{\Blindlist}
%
% \begin{macro}{\Blinditemize}
% \begin{macro}{\Blindenumerate}
% Some default macros for the standard environments.
%    \begin{macrocode}
\newcommand{\Blinditemize}{\Blindlist{itemize}}
\newcommand{\Blindenumerate}{\Blindlist{enumerate}}
%    \end{macrocode}
% \end{macro}%^^A{\Blinditemize}
% \end{macro}%^^A{\Blindenumerate}
%
% \begin{macro}{\blindlistoptional}
% Here we start a list with \verb|\item[]|. So we set the flag for optional
% parameter and start the normal list.
%    \begin{macrocode}
\newcommand{\blindlistoptional}[1]{
\blind@optionaltrue
\blindlist{#1}
}
%    \end{macrocode}
% \end{macro}%^^A{\blindlistoptional}
%
% \begin{macro}{\Blindlistoptional}
% Now a big list with optional parameter at \verb|\item|.
%    \begin{macrocode}
\newcommand{\Blindlistoptional}[1]{
\blind@optionaltrue
\blind@longtrue
\blindlist{#1}
}
%    \end{macrocode}
% \end{macro}%^^A{\blindlistoptional}
%
% \begin{macro}{\blinddescription}
% \begin{macro}{\Blinddescription}
% Some default macros for the standard environment description.
%    \begin{macrocode}
\newcommand{\blinddescription}{\blindlistoptional{description}}
\newcommand{\Blinddescription}{\Blindlistoptional{description}}
\newcounter{listcount}
\newcounter{blind@levelcount}
%    \end{macrocode}
% \end{macro}%^^A{\blinddescription}
% \end{macro}%^^A{\Blinddescription}
%
% \begin{macro}{\blind@items}
% Here the \verb|\item| are written.
% A local counter is defined and the \verb|\item| is written. The
% type of \verb|\item| is influenced by the flags.
%    \begin{macrocode}
\newcommand{\blind@items}{
\setcounter{listcount}{1}
\loop
\ifblind@optional
    \ifblind@long
        \item[\blindtext@countitem] \blindtext@text
    \else
        \item[\blindtext@count] \blindtext@item
    \fi
\else%\blind@optionalfalse
    \ifblind@long
        \item \blindtext@text
    \else
        \item \blindtext@countitem
    \fi
\fi%\ifblind@optional
%    \end{macrocode}
% Loop for cascaded lists.
% \changes{V1.3}{2003-05-18}{Cascaded lists}
%    \begin{macrocode}
{\loop
    \ifnum\value{blindlistlevel}>\value{blindlist@level}
    \addtocounter{blind@levelcount}{1}
    \blind@list[\value{blindlist}]\relax
    \addtocounter{blind@levelcount}{-1}
    \setcounter{listcount}{1}
\repeat}
\ifnum\value{listcount}<\value{blindlist}\addtocounter{listcount}{1}
%    \end{macrocode}
% Correction for nested values.
%    \begin{macrocode}
%    \end{macrocode}
% Close the loop
%    \begin{macrocode}
\repeat
}
%    \end{macrocode}
% \end{macro}%^^A{\blind@item}
%% ^^A-----------------------------------------------------------
% \section{A sample document}
%    \begin{macro}{\blinddocument}
% \verb|\blinddocument| adds a document with \verb|\chapter|,
% \verb|\section|\ldots, texts and lists (itemize, enumerate,
% description).
%    \begin{macrocode}
\newcommand{\blinddocument}{
\@ifundefined{chapter}{}{%
    \chapter{\blindtext@heading 0 (chapter)}
    \blindtext%
    }
  \section{\blindtext@heading 1 (section)}
  \blindtext
  \subsection{\blindtext@heading 2 (subsection)}
  \blindtext
  \subsubsection{ \blindtext@heading 3 (subsubsection)}
  \blindtext
  \paragraph{\blindtext@heading 4 (paragraph)}
  \blindtext
\section{\blindtext@list}
\subsection{\blindtext@listEx (itemize)}
    \blinditemize
    \subsubsection{\blindtext@listEx (4*itemize)}
    \blindlistlist{itemize}[2]
\subsection{\blindtext@listEx (enumerate)}
    \blindenumerate
    \subsubsection{\blindtext@listEx (4*enumerate)}
    \blindlistlist{enumerate}[2]
\subsection{\blindtext@listEx (description)}
    \blinddescription
    \subsubsection{\blindtext@listEx (4*description)}
    \blindlistlistoptional{description}[2]
}
%    \end{macrocode}
%    \end{macro}%^^A{\blinddocument}
%
%    \begin{macro}{\Blinddocument}
% \verb|\blinddocument| adds a document with \verb|\chapter|,
% \verb|\section|\ldots, texts and lists (itemize, enumerate,
% description).
%    \begin{macrocode}
\newcommand{\Blinddocument}{
\@ifundefined{chapter}{}{%
    \chapter{\blindtext@heading 0 (chapter)}
    \blindtext%
  }%
  \section{\blindtext@heading 1 (section)}
  \Blindtext
  \subsection{\blindtext@heading 2 (subsection)}
  \Blindtext
  \subsubsection{\blindtext@heading 3 (subsection)}
  \Blindtext
  \paragraph{\blindtext@heading 4 (paragraph)}
  \Blindtext
\section{\blindtext@list}
\subsection{\blindtext@listEx (itemize)}
    \Blinditemize
    \subsubsection{\blindtext@listEx (4*itemize)}
    \blind@longtrue
    \blindlistlist{itemize}[2]
\subsection{\blindtext@listEx (enumerate)}
    \Blindenumerate
    \subsubsection{\blindtext@listEx (4*enumerate)}
    \blind@longtrue
    \blindlistlist{enumerate}[2]
\subsection{\blindtext@listEx (description)}
    \Blinddescription
    \subsubsection{\blindtext@listEx (4*description)}
    \blind@longtrue
    \blindlistlistoptional{description}[2]
}
%    \end{macrocode}
%    \end{macro}%^^A{\Blinddocument}
%
%% ^^A-----------------------------------------------------------
% \section{The texts}
%    \begin{macro}{\addto}
% If babel is not loaded, we need the command \verb|\addto|.
%    \begin{macrocode}
%\providecommand{\addto}[2]{#2}
\@ifundefined{addto}{
\@ifpackageloaded{babel}{}{
\PackageWarning{blindtext}{%
You are not using babel.sty -> Language by random\MessageBreak
Kein babel.sty verwendet -> Zufallssprache}}
\newcommand{\addto}[2]{#2}
}{}
%    \end{macrocode}
%    \end{macro}%^^A\addto
%
% \subsection{Default without language}
% First all texts without any language. If you make a new translation, please
% define all this macros.
%    \begin{macrocode}
\def\blindtext@text{Text}
\def\blindtext@count{\ifcase\blind@listitem\or
  First\or Second%...
    \else Last\blind@listitem=0\fi
    \global\advance\blind@listitem by 1
}%\blindtext@count}
\def\blindtext@item{itemtext}
\def\blindtext@countitem{\blindtext@count\ \blindtext@item}
\def\blindtext@heading{Heading on level\xspace}
\def\blindtext@list{Lists}
\def\blindtext@listEx{Example for list\xspace}
%    \end{macrocode}
%
% \subsection{English Texts}
%    \begin{macrocode}
\addto\extrasenglish{
\def\blindtext@text{
Hello, here is some text without a meaning. This text should show,
how a printed text will look like at this place. If you read this
text, you will get no information. Really? Is there no
information? Is there a difference between this text and some
nonsense like \frqq Huardest gefburn\flqq? Kjift -- Never mind! A
blind text like this gives you information about the selected
font, how the letters are written and the impression of the look.
This text should contain all letters of the alphabet and it should
be written in of the original language. There is no need for a
special contents, but the length of words should match to the
language.}%\blindtext@text
}
%    \end{macrocode}
%
%    \begin{macrocode}
\addto\extrasenglish{
\def\blindtext@count{\ifcase\value{listcount}\or
    First\or Second \or Third \or Fourth\or Fivth\or
    Sixth\or Seventh\or Eighth \or Ninth\or Tenth\or
    Eleventh\or Twelfth\else Another\fi
}%\blindtext@count
\def\blindtext@item{item in a list} %, level~\arabic{blindlist@level}}
} %\addto\extrasenglish
%    \end{macrocode}
%
%    \begin{macrocode}
\addto\extrasenglish{
    \def\blindtext@heading{Heading on level\xspace}
    \def\blindtext@list{Lists}
    \def\blindtext@listEx{Example for list\xspace}
} %\addto\extrasenglish
%
%    \end{macrocode}
%
%
% \subsection{German Texts}
%
%    \begin{macrocode}
\addto\extrasgerman{
\def\blindtext@text{
Dies hier ist ein Blindtext zum Testen von Textausgaben. Wer
diesen Text liest, ist selbst schuld. Der Text gibt lediglich den
Grauwert der Schrift an. Ist das wirklich so? Ist es
gleich\-g\"ul\-tig ob ich schreibe: \frqq Dies ist ein
Blindtext\flqq\ oder \frqq Huardest gefburn\flqq? Kjift --
mitnichten! Ein Blindtext bietet mir wichtige Informationen. An
ihm messe ich die Lesbarkeit einer Schrift, ihre Anmutung, wie
harmonisch die Figuren zueinander stehen und pr\"u\-fe, wie breit
oder schmal sie l\"auft. Ein Blindtext sollte m\"og\-lichst viele
verschiedene Buchstaben enthalten und in der Originalsprache
gesetzt sein. Er mu\ss\ keinen Sinn ergeben, sollte aber lesbar
sein. Fremdsprachige Texte wie \frqq Lorem ipsum\flqq\ dienen
nicht dem eigentlichen Zweck, da sie eine
falsche Anmutung vermitteln.}%\blindtext@text
}
%    \end{macrocode}
%
%    \begin{macrocode}
\addto\extrasgerman{
\def\blindtext@count{\ifcase\value{listcount}\or
    Erster\or Zweiter \or Dritter \or Vierter \or F{\"u}nfter \or
    Sechster \or Siebter\or Achter \or Neunter \or Zehnter\or
    Elfter \or Zw{\"o}lfter \or Dreizehnter \or Vierzehnter\else
    Noch ein\fi
}%\blindtext@count
\def\blindtext@item{Listenpunkt, Stufe~\arabic{blind@levelcount}}
}% %\addto\extrasgerman
%    \end{macrocode}
%
%    \begin{macrocode}
\addto\extrasgerman{
    \def\blindtext@heading{{\"U}berschrift auf Ebene\xspace}
    \def\blindtext@list{Listen}
    \def\blindtext@listEx{Beispiel einer Liste\xspace}
} %\addto\extrasgerman
%
% If the packet \Lpack{german} is loaded, select the language.
%    \begin{macrocode}
\@ifpackageloaded{german}{\selectlanguage{german}}{}
%    \end{macrocode}
%
% \subsection{German - New typesetting}
%    \begin{macrocode}
\addto\extrasngerman{
\def\blindtext@text{
Dies hier ist ein Blindtext zum Testen von Textausgaben. Wer
diesen Text liest, ist selbst schuld. Der Text gibt lediglich den
Grauwert der Schrift an. Ist das wirklich so? Ist es
gleich\-g\"ul\-tig ob ich schreibe: \frqq Dies ist ein
Blindtext\flqq\ oder \frqq Huardest gefburn\flqq? Kjift --
mitnichten! Ein Blindtext bietet mir wichtige Informationen. An
ihm messe ich die Lesbarkeit einer Schrift, ihre Anmutung, wie
harmonisch die Figuren zueinander stehen und pr\"u\-fe, wie breit
oder schmal sie l\"auft. Ein Blindtext sollte m\"og\-lichst viele
verschiedene Buchstaben enthalten und in der Originalsprache
gesetzt sein. Er mu\ss\ keinen Sinn ergeben, sollte aber lesbar
sein. Fremdsprachige Texte wie \frqq Lorem ipsum\flqq\ dienen
nicht dem eigentlichen Zweck, da sie eine
falsche Anmutung vermitteln.}%\blindtext@text
}
%    \end{macrocode}
%
%    \begin{macrocode}
\addto\extrasngerman{
\def\blindtext@count{\ifcase\value{listcount}\or
    Erster\or Zweiter \or Dritter \or Vierter \or F{\"u}nfter \or
    Sechster \or Siebter\or Achter \or Neunter \or Zehnter\or
    Elfter \or Zw{\"o}lfter \or Dreizehnter \or Vierzehnter\else
    Noch ein\fi
}%\blindtext@count
\def\blindtext@item{Listenpunkt, Stufe~\arabic{blind@levelcount}}
}% %\addto\extrasgerman
%    \end{macrocode}
%
%    \begin{macrocode}
\addto\extrasngerman{
    \def\blindtext@heading{{\"U}berschrift auf Ebene\xspace}
    \def\blindtext@list{Listen}
    \def\blindtext@listEx{Beispiel einer Liste\xspace}
} %\addto\extrasngerman
%
% If the packet \Lpack{ngerman} is loaded, select the language.
%    \begin{macrocode}
\@ifpackageloaded{ngerman}{\selectlanguage{ngerman}}{}
%    \end{macrocode}
%
% \subsection{Latin Texts}
% I don't speak latin, but I think the classic "Lorem ipsum" should be available.
%    \begin{macrocode}
\addto\extraslatin{
\def\blindtext@text{
Lorem ipsum dolor sit amet, consectetuer adipiscing elit. Etiam
lobortis facilisis sem. Nullam nec mi et neque pharetra
sollicitudin. Praesent imperdiet mi nec ante. Donec ullamcorper,
felis non sodales commodo, lectus velit ultrices augue, a
dignissim nibh lectus placerat pede. Vivamus nunc nunc, molestie
ut, ultricies vel, semper in, velit. Ut porttitor. Praesent in
sapien. Lorem ipsum dolor sit amet, consectetuer adipiscing elit.
Duis fringilla tristique neque. Sed interdum libero ut metus.
Pellentesque placerat. Nam rutrum augue a leo. Morbi sed elit sit
amet ante lobortis sollicitudin. Praesent blandit blandit mauris.
Praesent lectus tellus, aliquet aliquam, luctus a, egestas a,
turpis. Mauris lacinia lorem sit amet ipsum. Nunc quis urna dictum
turpis accumsan semper.}%\blindtext@text
}
%    \end{macrocode}
%
% \section{Some other macros}
% \changes{V1.2b}{2001/05/25}{Add macros vieltext and alotoftext}
%    \begin{macro}{\alotoftext}
%    \begin{macrocode}
\let\alotoftext=\blindtext
%    \end{macrocode}
%    \end{macro}%^^A\alotoftext
%
% \Finale
% \PrintIndex
% \end{document}
%</package>
