% \iffalse meta-comment
%
% Copyright 1993-2016
% The LaTeX3 Project and any individual authors listed elsewhere
% in this file.
%
% This file is part of the LaTeX base system.
% -------------------------------------------
%
% It may be distributed and/or modified under the
% conditions of the LaTeX Project Public License, either version 1.3c
% of this license or (at your option) any later version.
% The latest version of this license is in
%    http://www.latex-project.org/lppl.txt
% and version 1.3c or later is part of all distributions of LaTeX
% version 2005/12/01 or later.
%
% This file has the LPPL maintenance status "maintained".
%
% The list of all files belonging to the LaTeX base distribution is
% given in the file `manifest.txt'. See also `legal.txt' for additional
% information.
%
% The list of derived (unpacked) files belonging to the distribution
% and covered by LPPL is defined by the unpacking scripts (with
% extension .ins) which are part of the distribution.
%
% \fi
%
% \iffalse
%
%<*dtx>
          \ProvidesFile{latexrelease.dtx}
%</dtx>
%<driver>\ProvidesFile{latexrelease.drv}
%<fixltx2e>\ProvidesPackage{fixltx2e}
%<fixltx2e>   [2016/12/29 v2.1a fixes to LaTeX (obsolete)]
%<latexrelease>\ProvidesPackage{latexrelease}
%<*!fixltx2e>
% \fi
%         \ProvidesFile{latexrelease.dtx}
          [2016/12/29 v1.0h LaTeX release emulation and tests]
% \iffalse
%</!fixltx2e>
%<*driver>
 \documentclass{ltxdoc}
 \newcommand\Lopt[1]{\textsf{#1}}
 \let\Lpack\Lopt
 \providecommand{\file}[1]{\texttt{#1}}
 \providecommand{\MF}{\textsf{Metafont}}
 \providecommand{\danger}{\marginpar[\hfill\protect\Huge!!]{\protect\Huge!!\hfill}}
 \begin{document}
 \DocInput{latexrelease.dtx}
 \end{document}
%</driver>
% \fi
%
%
%
% \let\package\textsf
%
%
% \GetFileInfo{latexrelease.dtx}
%
% \title{The \Lpack{latexrelease} package\thanks{This file
%         has version number \fileversion, last
%         revised \filedate.}}
% \author{The \LaTeX3 Project}
% \date{\filedate}
% \MaintainedByLaTeXTeam{latex}
%  \maketitle
%
% \section{Introduction}
% Prior to the 2015 release of \LaTeX{}, essentially no changes had been
% made to the \LaTeX\ format code for some years, with all
% improvements being instead added to the package \Lpack{fixltx2e}.
%
% While this worked at a technical level it meant that you had to
% explicitly opt-in to bug fixes and improvements, and the vast
% majority of documents did not benefit.
%
% As described in \LaTeX\ News 22, a new policy is being implemented 
% in which improvements will now be added to the format by default,
% and this \Lpack{latexrelease} package may be used to ensure
% stability where needed, either by making a new format use an older
% definition of some commands, or conversely may be used to supply the
% new definitions for use with an old format.
%
% The basic use is:
%\begin{verbatim}
% \RequirePackage[2015/01/01]{latexrelease}
% \documentclass{article}
% ....
%\end{verbatim}
%
% After such a declaration the document will use definitions current
% in the January 2015 \LaTeX{}, whether the actual format being used is
% older, or newer than that date. In the former case a copy of
% |latexrelease.sty| would need to be made available for use with the
% older format.  This may be used, for example, to share a document
% between co-workers using different \LaTeX\ releases, or to protect a
% document from being affected by system updates. As well as the
% definitions within the format itself, individual packages may use
% the commands defined here to  adjust their definitions to the
% specified date as described below.
%
%
% The bulk of this package, after some initial setup and option
% handling consists of a series of |\IncludeInRelease| commands
% which have been extracted from the main source files of the \LaTeX\
% format. These contain the old and new versions of any commands with
% modified definitions.
%
% \section{Package Options}
% \begin{itemize}
% \item \emph{yyyy/mm/dd}
% The package accepts any \LaTeX\ format date as argument,% 
% although dates in the future for which the current release of this
% package has no information will generate a warning.
%
% \item%
% |current| This is the default behaviour, it does not change the
% effective date of the format but does ensure that the
% |\IncludeInRelease| command is defined.
%
% \item
% |latest| sets the effective date of the format to the release date
% of this file, so in an older format applies all patches currently
% available.
% \end{itemize}
%
%
% \section{Release Specific Code}
%
% The |\IncludeInRelease| mechanism allows the kernel developer to
% associate code with a specific date to choose different versions of
% definitions depending on the date specified as an option to the
% \Lpack{latexrelease} package. Is also available for use by package
% authors (or even in a document if necessary).
%
% \medskip
%
% \noindent\DescribeMacro{\IncludeInRelease}
% \marg{code-date}^^A
% \oarg{format-date}%^^A
% \marg{label}^^A
% \marg{message}^^A
% \meta{code}^^A
% |\EndIncludeInRelease|
%
% \begin{description}
%
% \item[\marg{code-date}] This date is associated with the \marg{code}
% argument and will be compared to the requested date in the option to
% the \Lpack{latexrelease}.
% 
% \item[\oarg{format-date}] This optional argument can be used to
% specify a format date with the code in addition to the mandatory
% \marg{code-date} argument. This can be useful for package developers
% as described below.
%
% \item[\marg{label}] The \marg{label} argument is an identifier
% (string) that within a given package must be a unique label for each
% related set of optional definitions. Per package at most one code
% block from all the |\IncludeInRelease| declarations with the same
% label will be executed.
%
% \item[\marg{message}]
% The \marg{message} is an informative string that is used in
% messages. It has no other function.
%
% \item[\meta{code}]
% Any \TeX\ code after the |\IncludeInRelease| arguments
% up until the and the following |\EndIncludeInRelease|
% is to be
% conditionally included depending on the date of the format as
% described below.
%
% \end{description}
%
% The |\IncludeInRelease| declarations with a given label should be in
% reverse chronological order in the file. The one chosen will depend
% on this order, the effective format version and the date options, as
% described below.
%
% If your package \Lpack{mypackage} defines a |\widget| command but
% has one definition using the features available in the 2015 \LaTeX\
% release, and a different definition is required for older formats
% then you can use:
%\begin{verbatim}
% \IncludeInRelease{2015/01/01}{\widget}{Widget Definition}
%  \def\widget{new version}%
% \EndIncludeInRelease
%
% \IncludeInRelease{0000/00/00}{\widget}{Widget Definition}
%  \def\widget{old version}%
% \EndIncludeInRelease
%\end{verbatim}
%
% If a document using this package is used with a format with
% effective release date of 2015/01/01 or later the new code will be
% used, otherwise the old code will be used. Note the \emph{effective
% release date} might be the original \LaTeX\ release date as shown at
% the start of every \LaTeX\ job, or it may be set by the
% \Lpack{latexrelease} package, so for example a document author who
% wants to ensure the new version is used could use
%\begin{verbatim}
% \RequirePackage[2015/01/01]{latexrelease}
% \documentclass{article}
% \usepackage{mypackage}
%\end{verbatim}
%
% If the document  is used with a \LaTeX\ format from 2014 or before,
% then \Lpack{latexrelease} will not have been part of the original
% distribution, but it may be obtained from a later \LaTeX\ release or
% from CTAN and distributed with the document, it will make an older
% \LaTeX\ release act essentially like the 2015 release.
%
% \subsection{Intermediate Package Releases}
%
% The above example works well for testing against the latex format
% but is not always ideal for controlling code by the release date of
% the \emph{package}. Suppose \LaTeX\ is not updated but in March you
% update the \Lpack{mypackage} package and modify the definition of
% |\widget|. You could code the package as:
%\begin{verbatim}
% \IncludeInRelease{2015/03/01}{\widget}{Widget Definition}
%  \def\widget{even newer improved March version}%
% \EndIncludeInRelease
%
% \IncludeInRelease{2015/01/01}{\widget}{Widget Definition}
%  \def\widget{new version}%
% \EndIncludeInRelease
%
% \IncludeInRelease{0000/00/00}{\widget}{Widget Definition}
%  \def\widget{old version}%
% \EndIncludeInRelease
%\end{verbatim}
%
% This would work and allow a document author to choose a date such as
%\begin{verbatim}
% \RequirePackage[2015/03/01]{latexrelease}
% \documentclass{article}
% \usepackage{mypackage}
%\end{verbatim}
%
% To use the latest version, however it would have disadvantage that
% until the next release of \LaTeX, by default, if the document does 
% not use \Lpack{latexrelease} to specify a date, the new improved
% code will not be selected as the effective date will be 2015/01/01
% and so the first code block will be skipped.
% 
% For this reason |\IncludeInRelease| has an optional argument that
% specifies an alternative date to use if a date option has not been
% specified to \Lpack{latexrelease}.
%\begin{verbatim}
% \IncludeInRelease{2015/03/01}[2015/01/01]{\widget}{Widget Definition}
%  \def\widget{even newer improved March version}%
% \EndIncludeInRelease
%
% \IncludeInRelease{2015/01/01}{\widget}{Widget Definition}
%  \def\widget{new version}%
% \EndIncludeInRelease
%
% \IncludeInRelease{0000/00/00}{\widget}{Widget Definition}
%  \def\widget{old version}%
% \EndIncludeInRelease
%\end{verbatim}
%
% Now, by default on a 2015/01/01 \LaTeX\ format, the first code block
% will compare the format date to the optional argument 2015/01/01
% and so will execute the \emph{even newer improved} version. The
% remaining blocks using the |\widget| label argument will all then be
% skipped.
%
% If on the other hand the document requests an explicit release date
% using \Lpack{latexrelease} then this date will be used to decide what 
% code block to include.
%
% \subsection{Using \cs{IncludeInRelease} in Packages}
%
% If |\IncludeInRelease| is used within a package then all such
% conditional code needs to be within such declarations, e.g., it is
% not possible in the above example to have the ``current'' definition
% of |\widget| somewhere in the main code and only the two older
% definitions inside |\IncludeInRelease| declarations. If you would do
% this then one of those |\IncludeInRelease| declarations would be
% included overwriting the even newer code in the main part of the
% package. As a result your package may get fragmented over time with
% various |\IncludeInRelease| declarations sprinkled throughout your
% code or you have to interrupt the reading flow by putting those
% declarations together but not necessarily in the place where they
% belong.
%
% To avoid this issue you can use the following coding
% strategy: place the current |\widget| definition in the main code
% where it correctly belongs. 
% \begin{verbatim}
%   ...
%  \def\widget {even newer improved March version}
%  \def\@widget{newly added helper command no defined in older releases}
%   ...
%\end{verbatim}
% Then, near the end of your package place
% the following:
%  \begin{verbatim}
% \IncludeInRelease{2015/03/01}[2015/01/01]{\widget}{Widget Definition}
% \EndIncludeInRelease
%
% \IncludeInRelease{2015/01/01}{\widget}{Widget Definition}
%  \def\widget{new version}%
%  \let\@widget\@undefined % this doesn't exist in earlier releases
% \EndIncludeInRelease
%
% \IncludeInRelease{0000/00/00}{\widget}{Widget Definition}
%  \def\widget{old version}%
% \EndIncludeInRelease
%\end{verbatim}
% This way the empty code block hides the other |\IncludeInRelease|
% declarations unless there is an explicit request with a date
% 2015/01/01 or earlier.
%
% Now if you make a further change to |\widget| in the future you
% simply copy the current definition into the empty block and add a new
% empty declaration with todays date and the current format date. This
% way your main code stays readable and the old versions accumulate at
% the end of the package.\footnote{Of course there may be some cases
% in which the old code has to be in a specific place within the
% package as other code depends on it (e.g., if you
% \texttt{\string\let} something to it). In that case you have to
% place the code variations in the right place in your package rather
% than accumulating them at the very end.}
%
% The only other ``extra effort'' necessary when using this approach
% is that it may be advisable to undo new definitions in the code
% block for the previous release, e.g., in the above example we
% undefined |\@widget| as that isn't available in the 2015/01/01
% release but was defined in the main code. If all your conditional
% code is within |\IncludeInRelease| declarations that wouldn't been
% necessary as the new code only gets defined if that release is
% chosen.
%
% \section{fixltx2e}
%
% As noted above, prior to the 2015 \LaTeX\ release updates to the
% \LaTeX\ kernel were not made in the format source files but were 
% made available in the \Lpack{fixltx2e} package. That package is no
% longer needed but we generate a small package from this source
% that just makes a warning message but otherwise does nothing.
%
%
%
%
%
% \StopEventually{}
%
% \section{Implementation}
%
% We require at least a somewhat sane version of \LaTeXe{}. Earlier
% ones where really quite different from one another.
%    \begin{macrocode}
%<*latexrelease>
\NeedsTeXFormat{LaTeX2e}[1996/06/01]
%    \end{macrocode}
%
% \section{Setup}
%
% \begin{macro}{\IncludeInRelease}
% \begin{macro}{\EndIncludeInRelease}
%    \begin{macrocode}
%    \end{macrocode}
% \end{macro}
% \end{macro}
%
% \changes{v1.0c}{2015/02/19}{Swap argument order}
%    \begin{macrocode}
\DeclareOption*{%
  \def\@IncludeInRelease#1[#2]{\@IncludeInRele@se{#1}}%
  \let\requestedpatchdate\CurrentOption}
\DeclareOption{latest}{%
  \let\requestedpatchdate\latexreleaseversion}
\DeclareOption{current}{%
  \let\requestedpatchdate\fmtversion}
%    \end{macrocode}
%
%    \begin{macrocode}
\ExecuteOptions{current}
\ProcessOptions\relax
%    \end{macrocode}
%
% Sanity check options, it allows some non-legal dates but always
% ensures |requestedLaTeXdate| gets set to a number.  Generate an
% error if there are any non digit tokens remaining after removing the
% |//|.
%    \begin{macrocode}
\def\reserved@a{%
\edef\requestedLaTeXdate{\the\count@}%
\reserved@b}
\def\reserved@b#1\\{%
\def\reserved@b{#1}%
\ifx\reserved@b\@empty\else
\PackageError{latexrelease}%
             {Unexpected option \requestedpatchdate}%
             {The option must be of the form yyyy/mm/dd}%
\fi}
\afterassignment\reserved@a
\count@\expandafter
  \@parse@version\expandafter0\requestedpatchdate//00\@nil\\
%    \end{macrocode}
%
% less precautions needed for |\fmtversion|
%    \begin{macrocode}
\edef\currentLaTeXdate{%
   \expandafter\@parse@version\fmtversion//00\@nil}
%    \end{macrocode}
%
%    \begin{macrocode}
\ifnum\requestedLaTeXdate=\currentLaTeXdate
\PackageWarningNoLine{latexrelease}{%
  Current format date selected, no patches applied.}
\expandafter\endinput
\fi
%    \end{macrocode}
%
% A newer version of latexrelease should have been distributed with
% the later format.
%    \begin{macrocode}
\ifnum\currentLaTeXdate
  >\expandafter\@parse@version\latexreleaseversion//00\@nil
\PackageWarningNoLine{latexrelease}{%
The current package is for an older LaTeX format:\MessageBreak
LaTeX \latexreleaseversion\space\MessageBreak
Obtain a newer version of this package!}
\expandafter\endinput
\fi
%    \end{macrocode}
% can't patch into the future, could make this an error
% but it has some uses to control package updates
% so allow for now.
%    \begin{macrocode}
\ifnum\requestedLaTeXdate
  >\expandafter\@parse@version\latexreleaseversion//00\@nil
\PackageWarningNoLine{latexrelease}{%
The current package is for LaTeX \latexreleaseversion:\MessageBreak
It has no patches beyond that date\MessageBreak
There may be an updated version\MessageBreak
of this package available from CTAN}
\expandafter\endinput
\fi
%    \end{macrocode}
%
% Update the format version to the requested date.
%    \begin{macrocode}
\let\fmtversion\requestedpatchdate
\let\currentLaTeXdate\requestedLaTeXdate
%    \end{macrocode}
%
%
% \section{Individual  Changes}
%
% The code for each change will be inserted at this point, extracted
% from the kernel source files.
%    
%    \begin{macrocode}
%</latexrelease>
%    \end{macrocode}
%
% \section{fixltx2e}
%
% Generate a stub \Lpack{fixltx2e} package:
%    \begin{macrocode}
%<*fixltx2e>
\IncludeInRelease{2015/01/01}{\fixltxe}{Old fixltx2e package}
\NeedsTeXFormat{LaTeX2e}
\PackageWarningNoLine{fixltx2e}{%
fixltx2e is not required with releases after 2015\MessageBreak
All fixes are now in the LaTeX kernel.\MessageBreak
See the latexrelease package for details}
\EndIncludeInRelease
\IncludeInRelease{0000/00/00}{\fixltxe}{Old fixltx2e package}
\def\@outputdblcol{%
  \if@firstcolumn
    \global\@firstcolumnfalse
    \global\setbox\@leftcolumn\copy\@outputbox
    \splitmaxdepth\maxdimen
    \vbadness\maxdimen
     \setbox\@outputbox\vbox{\unvbox\@outputbox\unskip}%
     \setbox\@outputbox\vsplit\@outputbox to\maxdimen
    \toks@\expandafter{\topmark}%
    \xdef\@firstcoltopmark{\the\toks@}%
    \toks@\expandafter{\splitfirstmark}%
    \xdef\@firstcolfirstmark{\the\toks@}%
    \ifx\@firstcolfirstmark\@empty
      \global\let\@setmarks\relax
    \else
      \gdef\@setmarks{%
        \let\firstmark\@firstcolfirstmark
        \let\topmark\@firstcoltopmark}%
    \fi
  \else
    \global\@firstcolumntrue
    \setbox\@outputbox\vbox{%
     \hb@xt@\textwidth{%
        \hb@xt@\columnwidth{\box\@leftcolumn \hss}%
        \hfil
        {\normalcolor\vrule \@width\columnseprule}%
        \hfil
       \hb@xt@\columnwidth{\box\@outputbox \hss}}}%
  \@combinedblfloats
    \@setmarks
    \@outputpage
    \begingroup
      \@dblfloatplacement
      \@startdblcolumn
      \@whilesw\if@fcolmade \fi{\@outputpage\@startdblcolumn}%
    \endgroup
  \fi}
\def\end@dblfloat{%
  \if@twocolumn
    \@endfloatbox
    \ifnum\@floatpenalty <\z@
      \@largefloatcheck
      \global\dp\@currbox1sp %
      \@cons\@currlist\@currbox
      \ifnum\@floatpenalty <-\@Mii
        \penalty -\@Miv
        \@tempdima\prevdepth
        \vbox{}%
        \prevdepth\@tempdima
        \penalty\@floatpenalty
      \else
        \vadjust{\penalty -\@Miv \vbox{}\penalty\@floatpenalty}\@Esphack
      \fi
    \fi
  \else
    \end@float
  \fi
}
\def\@testwrongwidth #1{%
  \ifdim\dp#1=\f@depth
  \else
    \global\@testtrue
  \fi}
\let\f@depth\z@
\def\@dblfloatplacement{\global\@dbltopnum\c@dbltopnumber
   \global\@dbltoproom \dbltopfraction\@colht
   \@textmin \@colht
   \advance \@textmin -\@dbltoproom
   \@fpmin \dblfloatpagefraction\textheight
   \@fptop \@dblfptop
   \@fpsep \@dblfpsep
   \@fpbot \@dblfpbot
   \def\f@depth{1sp}}
\def \@doclearpage {%
     \ifvoid\footins
       \setbox\@tempboxa\vsplit\@cclv to\z@ \unvbox\@tempboxa
       \setbox\@tempboxa\box\@cclv
       \xdef\@deferlist{\@toplist\@botlist\@deferlist}%
       \global \let \@toplist \@empty
       \global \let \@botlist \@empty
       \global \@colroom \@colht
       \ifx \@currlist\@empty
       \else
          \@latexerr{Float(s) lost}\@ehb
          \global \let \@currlist \@empty
       \fi
       \@makefcolumn\@deferlist
       \@whilesw\if@fcolmade \fi{\@opcol\@makefcolumn\@deferlist}%
       \if@twocolumn
         \if@firstcolumn
           \xdef\@deferlist{\@dbltoplist\@deferlist}%
           \global \let \@dbltoplist \@empty
           \global \@colht \textheight
           \begingroup
              \@dblfloatplacement
              \@makefcolumn\@deferlist
              \@whilesw\if@fcolmade \fi{\@outputpage
                                        \@makefcolumn\@deferlist}%
           \endgroup
         \else
           \vbox{}\clearpage
         \fi
       \fi
       \ifx\@deferlist\@empty \else\clearpage \fi
     \else
       \setbox\@cclv\vbox{\box\@cclv\vfil}%
       \@makecol\@opcol
       \clearpage
     \fi
}
\def \@startdblcolumn {%
  \@tryfcolumn \@deferlist
  \if@fcolmade
  \else
    \begingroup
      \let \reserved@b \@deferlist
      \global \let \@deferlist \@empty
      \let \@elt \@sdblcolelt
      \reserved@b
    \endgroup
  \fi
}
\def\@addtonextcol{%
  \begingroup
   \@insertfalse
   \@setfloattypecounts
   \ifnum \@fpstype=8
   \else
     \ifnum \@fpstype=24
     \else
       \@flsettextmin
       \@reqcolroom \ht\@currbox
       \advance \@reqcolroom \@textmin
       \ifdim \@colroom>\@reqcolroom
         \@flsetnum \@colnum
         \ifnum\@colnum>\z@
            \@bitor\@currtype\@deferlist
            \@testwrongwidth\@currbox
            \if@test
            \else
              \@addtotoporbot
            \fi
         \fi
       \fi
     \fi
   \fi
   \if@insert
   \else
     \@cons\@deferlist\@currbox
   \fi
  \endgroup
}
\def\@addtodblcol{%
  \begingroup
   \@insertfalse
   \@setfloattypecounts
   \@getfpsbit \tw@
   \ifodd\@tempcnta
     \@flsetnum \@dbltopnum
     \ifnum \@dbltopnum>\z@
       \@tempswafalse
       \ifdim \@dbltoproom>\ht\@currbox
         \@tempswatrue
       \else
         \ifnum \@fpstype<\sixt@@n
           \advance \@dbltoproom \@textmin
           \ifdim \@dbltoproom>\ht\@currbox
             \@tempswatrue
           \fi
           \advance \@dbltoproom -\@textmin
         \fi
       \fi
       \if@tempswa
           \@bitor \@currtype \@deferlist
          \@testwrongwidth\@currbox
           \if@test
           \else
              \@tempdima -\ht\@currbox
              \advance\@tempdima
                -\ifx \@dbltoplist\@empty \dbltextfloatsep \else
                                          \dblfloatsep \fi
              \global \advance \@dbltoproom \@tempdima
              \global \advance \@colht \@tempdima
              \global \advance \@dbltopnum \m@ne
              \@cons \@dbltoplist \@currbox
              \@inserttrue
           \fi
       \fi
     \fi
   \fi
   \if@insert
   \else
     \@cons\@deferlist\@currbox
   \fi
  \endgroup
}
\def \@addtocurcol {%
   \@insertfalse
   \@setfloattypecounts
   \ifnum \@fpstype=8
   \else
     \ifnum \@fpstype=24
     \else
       \@flsettextmin
       \advance \@textmin \@textfloatsheight
       \@reqcolroom \@pageht
       \ifdim \@textmin>\@reqcolroom
         \@reqcolroom \@textmin
       \fi
       \advance \@reqcolroom \ht\@currbox
       \ifdim \@colroom>\@reqcolroom
         \@flsetnum \@colnum
         \ifnum \@colnum>\z@
           \@bitor\@currtype\@deferlist
          \@testwrongwidth\@currbox
           \if@test
           \else
             \@bitor\@currtype\@botlist
             \if@test
               \@addtobot
             \else
               \ifodd \count\@currbox
                 \advance \@reqcolroom \intextsep
                 \ifdim \@colroom>\@reqcolroom
                   \global \advance \@colnum \m@ne
                   \global \advance \@textfloatsheight \ht\@currbox
                   \global \advance \@textfloatsheight 2\intextsep
                   \@cons \@midlist \@currbox
                   \if@nobreak
                     \nobreak
                     \@nobreakfalse
                     \everypar{}%
                   \else
                     \addpenalty \interlinepenalty
                   \fi
                   \vskip \intextsep
                   \box\@currbox
                   \penalty\interlinepenalty
                   \vskip\intextsep
                   \ifnum\outputpenalty <-\@Mii \vskip -\parskip\fi
                   \outputpenalty \z@
                   \@inserttrue
                 \fi
               \fi
               \if@insert
               \else
                 \@addtotoporbot
               \fi
             \fi
           \fi
         \fi
       \fi
     \fi
   \fi
   \if@insert
   \else
     \@resethfps
     \@cons\@deferlist\@currbox
   \fi
}
\def\@xtryfc #1{%
  \@next\reserved@a\@trylist{}{}%
  \@currtype \count #1%
  \divide\@currtype\@xxxii
  \multiply\@currtype\@xxxii
  \@bitor \@currtype \@failedlist
  \@testfp #1%
  \@testwrongwidth #1%
  \ifdim \ht #1>\@colht
     \@testtrue
  \fi
  \if@test
    \@cons\@failedlist #1%
  \else
    \@ytryfc #1%
  \fi}
\def\@ztryfc #1{%
  \@tempcnta\count #1%
  \divide\@tempcnta\@xxxii
  \multiply\@tempcnta\@xxxii
  \@bitor \@tempcnta {\@failedlist \@flfail}%
  \@testfp #1%
  \@testwrongwidth #1%
  \@tempdimb\@tempdima
  \advance\@tempdimb\ht #1%
  \advance\@tempdimb\@fpsep
  \ifdim \@tempdimb >\@colht
    \@testtrue
  \fi
  \if@test
    \@cons\@flfail #1%
  \else
    \@cons\@flsucceed #1%
    \@tempdima\@tempdimb
  \fi}
\def\@{\spacefactor\@m{}}
\def\@tempa#1#2{#1#2\relax}
\ifx\setlength\@tempa
  \def\setlength#1#2{#1 #2\relax}
\fi
\def\addpenalty#1{%
  \ifvmode
    \if@minipage
    \else
      \if@nobreak
      \else
        \ifdim\lastskip=\z@
          \penalty#1\relax
        \else
          \@tempskipb\lastskip
          \begingroup
            \advance \@tempskipb
              \ifdim\prevdepth>\maxdepth\maxdepth\else
                 \ifdim \prevdepth = -\@m\p@ \z@ \else \prevdepth \fi
               \fi
             \vskip -\@tempskipb
             \penalty#1%
             \vskip\@tempskipb
          \endgroup
          \vskip -\@tempskipb
          \vskip \@tempskipb
        \fi
      \fi
    \fi
  \else
    \@noitemerr
  \fi}
\def\@fnsymbol#1{%
   \ifcase#1\or \TextOrMath\textasteriskcentered *\or
   \TextOrMath \textdagger \dagger\or
   \TextOrMath \textdaggerdbl \ddagger \or
   \TextOrMath \textsection  \mathsection\or
   \TextOrMath \textparagraph \mathparagraph\or
   \TextOrMath \textbardbl \|\or
   \TextOrMath {\textasteriskcentered\textasteriskcentered}{**}\or
   \TextOrMath {\textdagger\textdagger}{\dagger\dagger}\or
   \TextOrMath {\textdaggerdbl\textdaggerdbl}{\ddagger\ddagger}\else
   \@ctrerr \fi
}
\begingroup\expandafter\expandafter\expandafter\endgroup
\expandafter\ifx\csname eTeXversion\endcsname\relax
\DeclareRobustCommand\TextOrMath{%
  \ifmmode  \expandafter\@secondoftwo
  \else     \expandafter\@firstoftwo  \fi}
\protected@edef\TextOrMath#1#2{\TextOrMath{#1}{#2}}
\else
\protected\expandafter\def\csname TextOrMath\space\endcsname{%
  \ifmmode  \expandafter\@secondoftwo
  \else     \expandafter\@firstoftwo  \fi}
\edef\TextOrMath#1#2{%
  \expandafter\noexpand\csname TextOrMath\space\endcsname
  {#1}{#2}}
\fi
\def\@esphack{%
  \relax
  \ifhmode
    \spacefactor\@savsf
    \ifdim\@savsk>\z@
      \nobreak \hskip\z@skip  % <------
      \ignorespaces
    \fi
  \fi}
\def\@Esphack{%
  \relax
  \ifhmode
    \spacefactor\@savsf
    \ifdim\@savsk>\z@
      \nobreak \hskip\z@skip  % <------
      \@ignoretrue
      \ignorespaces
    \fi
   \fi}
\DeclareRobustCommand\em
        {\@nomath\em \ifdim \fontdimen\@ne\font >\z@
                       \eminnershape \else \itshape \fi}
\def\eminnershape{\upshape}
\DeclareRobustCommand*\textsubscript[1]{%
  \@textsubscript{\selectfont#1}}
\def\@textsubscript#1{%
  {\m@th\ensuremath{_{\mbox{\fontsize\sf@size\z@#1}}}}}
\def\@DeclareMathSizes #1#2#3#4#5{%
  \@defaultunits\dimen@ #2pt\relax\@nnil
  \if $#3$%
    \expandafter\let\csname S@\strip@pt\dimen@\endcsname\math@fontsfalse
  \else
    \@defaultunits\dimen@ii #3pt\relax\@nnil
    \@defaultunits\@tempdima #4pt\relax\@nnil
    \@defaultunits\@tempdimb #5pt\relax\@nnil
    \toks@{#1}%
    \expandafter\xdef\csname S@\strip@pt\dimen@\endcsname{%
      \gdef\noexpand\tf@size{\strip@pt\dimen@ii}%
      \gdef\noexpand\sf@size{\strip@pt\@tempdima}%
      \gdef\noexpand\ssf@size{\strip@pt\@tempdimb}%
      \the\toks@
    }%
  \fi
}
\providecommand*\MakeRobust[1]{%
  \@ifundefined{\expandafter\@gobble\string#1}{%
    \@latex@error{The control sequence `\string#1' is undefined!%
      \MessageBreak There is nothing here to make robust}%
    \@eha
  }%
  {%
    \@ifundefined{\expandafter\@gobble\string#1\space}%
    {%
      \expandafter\let\csname
      \expandafter\@gobble\string#1\space\endcsname=#1%
      \edef\reserved@a{\string#1}%
      \def\reserved@b{#1}%
      \edef\reserved@b{\expandafter\strip@prefix\meaning\reserved@b}%
      \edef#1{%
        \ifx\reserved@a\reserved@b
          \noexpand\x@protect\noexpand#1%
        \fi
        \noexpand\protect\expandafter\noexpand
        \csname\expandafter\@gobble\string#1\space\endcsname}%
    }%
    {\@latex@info{The control sequence `\string#1' is already robust}}%
   }%
}
\MakeRobust\(
\MakeRobust\)
\MakeRobust\[
\MakeRobust\]
\MakeRobust\makebox
\MakeRobust\savebox
\MakeRobust\framebox
\MakeRobust\parbox
\MakeRobust\rule
\MakeRobust\raisebox
\def\@xfloat #1[#2]{%
  \@nodocument
  \def \@captype {#1}%
   \def \@fps {#2}%
   \@onelevel@sanitize \@fps
   \def \reserved@b {!}%
   \ifx \reserved@b \@fps
     \@fpsadddefault
   \else
     \ifx \@fps \@empty
       \@fpsadddefault
     \fi
   \fi
   \ifhmode
     \@bsphack
     \@floatpenalty -\@Mii
   \else
     \@floatpenalty-\@Miii
   \fi
  \ifinner
     \@parmoderr\@floatpenalty\z@
  \else
    \@next\@currbox\@freelist
      {%
       \@tempcnta \sixt@@n
       \expandafter \@tfor \expandafter \reserved@a
         \expandafter :\expandafter =\@fps
         \do
          {%
           \if \reserved@a h%
             \ifodd \@tempcnta
             \else
               \advance \@tempcnta \@ne
             \fi
           \else\if \reserved@a t%
             \@setfpsbit \tw@
           \else\if \reserved@a b%
             \@setfpsbit 4%
           \else\if \reserved@a p%
             \@setfpsbit 8%
           \else\if \reserved@a !%
             \ifnum \@tempcnta>15
               \advance\@tempcnta -\sixt@@n\relax
             \fi
           \else
             \@latex@error{Unknown float option `\reserved@a'}%
             {Option `\reserved@a' ignored and `p' used.}%
             \@setfpsbit 8%
           \fi\fi\fi\fi\fi
           }%
       \@tempcntb \csname ftype@\@captype \endcsname
       \multiply \@tempcntb \@xxxii
       \advance \@tempcnta \@tempcntb
       \global \count\@currbox \@tempcnta
       }%
    \@fltovf
  \fi
  \global \setbox\@currbox
    \color@vbox
      \normalcolor
      \vbox \bgroup
        \hsize\columnwidth
        \@parboxrestore
        \@floatboxreset
}
 \def\@stpelt#1{\global\csname c@#1\endcsname \m@ne\stepcounter{#1}}
\EndIncludeInRelease
%</fixltx2e>
%    \end{macrocode}
%
% \Finale
%
\endinput