\def\fileversion{1.1}
\def\filedate{1996/06/30}
%\iffalse meta-comment
%\psfont: A \LaTeXe\ package for using PostScript fonts
%
%Copyright \copyright\ 1996 Sebastian Marius Kirsch\texttt{%
% $\langle$sebastian\_kirsch@kl.maus.de$\rangle$}
%
%This program is free software; you can redistribute it and/or modify
%it under the terms of the GNU General Public License as published by
%the Free Software Foundation; either version 2 of the License, or
%(at your option) any later version.
%
%This program is distributed in the hope that it will be useful,
%but WITHOUT ANY WARRANTY; without even the implied warranty of
%MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
%GNU General Public License for more details.
%
%You should have received a copy of the GNU General Public License
%along with this program; if not, write to the Free Software
%Foundation, Inc., 675 Mass Ave, Cambridge, MA 02139, USA.
%\fi
%
%\changes{0.9}{1996/05/18}{First version using \texttt{doc} and
%  \texttt{docstrip}}
%\changes{1.0}{1996/05/31}{First public release}
%\changes{1.0a}{1996/06/27}{Renamed to psfont. Updating documentation.}
%\changes{1.0b}{1996/06/28}{Optional argument for \cmd{\Available}\ldots}
%\changes{1.0c}{1996/06/29}{Inserted some code from psnfss. Some very
%enlightning thoughts about the future of this package.}
%\changes{1.0d}{1996/06/29}{New command \texttt{AvailableFont}. Why split this
%up between \psNFSS\ and \textsf{mf}\NFSS?}
%\changes{1.0e}{1996/06/30}{New syntax for \texttt{Default}\ldots\texttt{Font}}
%\changes{1.1}{1996/06/30}{Second public release}
%
% \CheckSum{364}
%% \CharacterTable
%%  {Upper-case    \A\B\C\D\E\F\G\H\I\J\K\L\M\N\O\P\Q\R\S\T\U\V\W\X\Y\Z
%%   Lower-case    \a\b\c\d\e\f\g\h\i\j\k\l\m\n\o\p\q\r\s\t\u\v\w\x\y\z
%%   Digits        \0\1\2\3\4\5\6\7\8\9
%%   Exclamation   \!     Double quote  \"     Hash (number) \#
%%   Dollar        \$     Percent       \%     Ampersand     \&
%%   Acute accent  \'     Left paren    \(     Right paren   \)
%%   Asterisk      \*     Plus          \+     Comma         \,
%%   Minus         \-     Point         \.     Solidus       \/
%%   Colon         \:     Semicolon     \;     Less than     \<
%%   Equals        \=     Greater than  \>     Question mark \?
%%   Commercial at \@     Left bracket  \[     Backslash     \\
%%   Right bracket \]     Circumflex    \^     Underscore    \_
%%   Grave accent  \`     Left brace    \{     Vertical bar  \|
%%   Right brace   \}     Tilde         \~}
%%
%
%\title{\psfont: A general way to use\\
% PostScript fonts\thanks{This file has version number \fileversion, last
% revised \filedate.}} 
%
%\author{Sebastian Marius Kirsch\\
%  \texttt{sebastian\_kirsch@kl.maus.de}}
%
%\date{\filedate}
%
%\maketitle
%
%\begin{abstract}
%  This package provides a general way to use PostScript fonts
%  without handling with thousands of style files, one for each font you want
%  to use. It works with a style file, \texttt{psfont.sty}, which contains all
%  the macros, and a configuration file, \texttt{psfont.cfg}, which tells the
%  style file about the available fonts.
%\end{abstract}
%
%\section{Introduction}
%
%This package lets you use one single package to load every PostScript font you
%would want. You don't have to load one file for each font anymore, and the
%package even warns you if you try to load two contradicting fonts at once,
%e.~g. two roman fonts. If you use the option \texttt{onlyps}, it substitutes
%the default PS fonts for the families you have not specified. 
%
%The package is intended as a replacement for the \textsf{psfonts} package of
%\psNFSS, by Sebastian Rahtz
%(\texttt{s.rahtz@elsevier.co.uk}). \textsf{psfonts} is not very consequent,
%because some of its style files redefine all three defaults, while
%others only change one.
%
%\section{The \texttt{docstrip} modules}
%
%This file contains five modules to direct \texttt{docstrip} in generating the
%external files:
%
%\begin{tabular}[t]{ll}
%driver & A short driver for producing the documentation\\
%package & The package itself\\
%config & The local configuration file\\
%Upsy & A font definition file for Adobe Symbol, from \psNFSS\\
%Upzd & A font definition file for Adobe Zapf Dingbats, from \psNFSS\\
%\end{tabular}
%
%\StopEventually
%
%\section{Producing the documentation}
%
%This short driver can be extracted by \texttt{docstrip} to produce the
%documentation.
%
%    \begin{macrocode}
%<*driver>
\documentclass{ltxdoc}

\newcommand{\NFSS}{\textsf{NFSS}}
\newcommand{\psNFSS}{\textsf{psNFSS}}
\newcommand{\psfont}{\texttt{psfont}}

\begin{document}

\DocInput{psfont.dtx}

\end{document}
%</driver>
%    \end{macrocode}
%
%\section{The Code}
%
%\subsection{Introduction}
%
%First we have to introduce ourselves.
%
%    \begin{macrocode}
%<*package>
\NeedsTeXFormat{LaTeX2e} 
\ProvidesPackage{psfont}%
  [\filedate\space v\fileversion\space loading PostScript fonts]
%    \end{macrocode}
%
%\subsection{Switches}
%
%Next, we define some switches. They are used to determine whether some fonts
%have already been loaded, so we can warn the user when he tries to load two
%colliding fonts.
%
%    \begin{macrocode}
\newif\ifrm@set\rm@setfalse
\newif\ifsf@set\sf@setfalse
\newif\iftt@set\tt@setfalse
%    \end{macrocode}
%
%\subsection{The default fonts}
%
%\DescribeMacro{\DefaultRMFont}
%\DescribeMacro{\DefaultSFFont}
%\DescribeMacro{\DefaultTTFont}
%These are some commands for changing the default fonts.
%
%\noindent\cmd{\DefaultRMFont}\marg{\NFSS\ font family}\\
%\cmd{\DefaultSFFont}\marg{\NFSS\ font family}\\
%\cmd{\DefaultTTFont}\marg{\NFSS\ font family}
%
%    \begin{macrocode}
\newcommand{\DefaultRMFont}[1]{\renewcommand{\def@rmfont}{#1}}
\newcommand{\DefaultSFFont}[1]{\renewcommand{\def@sffont}{#1}}
\newcommand{\DefaultTTFont}[1]{\renewcommand{\def@ttfont}{#1}}
\newcommand{\def@rmfont}{}
\newcommand{\def@sffont}{}
\newcommand{\def@ttfont}{}
%    \end{macrocode}
%
%\subsection{Declaring the options}
%
%\DescribeMacro{\AvailableRMFont}
%\DescribeMacro{\AvailableRMFont}
%\DescribeMacro{\AvailableRMFont}
%These commands are needed later in the configuration
%file. There is one command for each font family, ie.\ roman, sans serif or
%typewriter.  
%
% \noindent
% \cmd{\AvailableRMFont}\oarg{additional code}\marg{long name}\marg{\NFSS\ 
% family name}\\
% \cmd{\AvailableSFFont}\oarg{additional code}\marg{long name}\marg{\NFSS\ 
% family name}\\
% \cmd{\AvailableTTFont}\oarg{additional code}\marg{long name}\marg{\NFSS\ 
% family name}
%
%They declare their first argument as an option. 
%
%If the option is called, and the font family has already been defined, a
%\cmd{\PackageError} is reported. If not, the second argument is defined as
%the approriate family default.
%
%When the family default has successfully been set, the approriate switch is
%turned, so it is not redefined anywhere else in this file. 
%
%The optional argument contains some code that is to be executed when the
%defaults have been set. I do not need this now, but this hook could be useful
%later.
%
%    \begin{macrocode}
\newcommand{\AvailableRMFont}[3][]{%
  \DeclareOption{#2}{%
    \ifrm@set\PackageError{psfont}{%
      \protect\rmfamily\space already defined as \rmdefault
      }{%
      You tried to load two roman families at the same time,\MessageBreak
      e.g. times and palatino}
    \else\renewcommand{\rmdefault}{#3}\rm@settrue
    #1
    \fi}
  }

\newcommand{\AvailableSFFont}[3][]{%
  \DeclareOption{#2}{%
    \ifsf@set\PackageError{psfont}{%
      \protect\sffamily\space already defined as \sfdefault
      }{%
      You tried to load two sans serif families at the same time,\MessageBreak
      e.g. gill and helvetica}
    \else\renewcommand{\sfdefault}{#3}\sf@settrue
    #1
    \fi}
  }

\newcommand{\AvailableTTFont}[3][]{%
  \DeclareOption{#2}{%
    \iftt@set\PackageError{psfont}{%
      \protect\ttfamily\space already defined as \ttdefault
      }{%
      You tried to load two typewriter families at the same time,\MessageBreak
      e.g. courier and typewriter}
    \else\renewcommand{\ttdefault}{#3}\tt@settrue
    #1
    \fi}
  }
%    \end{macrocode}
%
%\subsection{One command fits all}
%
%\DescribeMacro{\AvailableFont}
%With the macro |\AvailableFont|, all three defaults are set with one
%option. This is useful for managing combinations of three fonts under one
%name, as well as for fonts that have the variants sans serif and
%typewriter. (I'm told Lucida is one of those.) 
%
%    \begin{macrocode}
\newcommand{\AvailableFont}[5][]{%
  \DeclareOption{#2}{%
    \ifrm@set\PackageError{psfont}{%
      \protect\rmfamily\space already defined as \rmdefault
      }{%
      You tried to load two roman families at the same time,\MessageBreak
      e.g. times and palatino}
    \else\renewcommand{\rmdefault}{#3}\rm@settrue
    \fi
    \ifsf@set\PackageError{psfont}{%
      \protect\sffamily\space already defined as \sfdefault
      }{%
      You tried to load two sans serif families at the same time,\MessageBreak
      e.g. gill and helvetica}
    \else\renewcommand{\sfdefault}{#4}\sf@settrue
    \fi
    \iftt@set\PackageError{psfont}{%
      \protect\ttfamily\space already defined as \ttdefault
      }{%
      You tried to load two typewriter families at the same time,\MessageBreak
      e.g. courier and typewriter}
    \else\renewcommand{\ttdefault}{#5}\tt@settrue
    \fi
    #1
  }
}
%    \end{macrocode}
%
%\subsection{Loading the configuration file}
%
%Next, the configuration file is loaded. If it is not found, an error is
%issued, because the package is quite useless without it.
%
%    \begin{macrocode}
\InputIfFileExists{psfont.cfg}{}{%
  \PackageError{psfont}{%
    No local configuration file found
    }{%
    The psfont package was loaded without a local\MessageBreak
    configuration file, so it doesn't know which fonts\MessageBreak
    are available.}
  }
%</package>
%    \end{macrocode}
%
%\subsection{The configuration file}
%
%The configuration file looks like this:
%
%\subsubsection{Introduction}
%
%As usual\ldots
%
%    \begin{macrocode}
%<*config>
\NeedsTeXFormat{LaTeX2e}
\ProvidesFile{psfont.cfg}
  [\filedate\space v\fileversion\space Local configuration for psfont.sty]
%    \end{macrocode}
%
%\subsubsection{Declaring default fonts}
%
%Here, the default PS fonts are defined. They are needed later, if the author
%does not define all PS fonts he wants to use, but wants his document to
%contain only PS fonts.
%
%    \begin{macrocode}
\DefaultRMFont{ptm}
\DefaultSFFont{phv}
\DefaultTTFont{pcr}
%    \end{macrocode}
%
%\subsubsection{Available fonts}
%
%Now the available PS fonts are defined. They are divided into three
%categories, roman fonts, sans serif fonts and typewriter fonts, as it is done
%in \LaTeXe\ itself. 
%
%They are defined using the \cmd{\Available}\ldots\ macros. These macros
%define a symbolic name to be used as an option to the package, and take the
%name of the \NFSS\ font family as a second argument.
%
%    \begin{macrocode}
\AvailableRMFont{times}{ptm}
\AvailableRMFont{palatino}{ppl}
\AvailableRMFont{newcent}{pnc}

\AvailableSFFont{helv}{phv}
\AvailableSFFont{gill}{pgs}

\AvailableTTFont{courier}{pcr}
%</config>
%    \end{macrocode}
%
% And that's the configuration. Of course one could do much more with this
% configuration file, declaring new options and all. It's probably the biggest
% hook a package could have. :-)
%
%\subsection{\texttt{onlyps}: Using only PS fonts}
%
%\DescribeEnv{onlyps}
%This option redefines all other family defaults that have not yet been
%\cmd{\renewcommand}ed to PS fonts. It uses the default fonts as defined in
%the configuration file. If no default fonts have been defined, it reports a
%warning and does nothing.
%
%    \begin{macrocode}
%<*package>
\DeclareOption{onlyps}{
  \ifrm@set\else
    \ifx\empty\def@rmfont
       \PackageWarning{psfont}{No default roman font defined!}
    \else\renewcommand{\rmdefault}{\def@rmfont}\fi
  \fi
  \ifsf@set\else
    \ifx\empty\def@sffont
       \PackageWarning{psfont}{No default sans serif font defined!}
    \else\renewcommand{\sfdefault}{\def@sffont}\fi
  \fi
  \iftt@set\else
    \ifx\empty\def@ttfont
       \PackageWarning{psfont}{No default typewriter font defined!}
    \else\renewcommand{\ttdefault}{\def@ttfont}\fi
  \fi
  }
%    \end{macrocode}
%
%\subsection{Parts of \textsf{psfonts}}
%
%\textit{The \psfont\ package ist ultimately intended as a replacement for
%\textsf{psfonts} of \psNFSS. I therefore use the code of some files of
%\textsf{psfonts} and wrap it up in an option. All code and comments of this
%section are from \textsf{psfonts}, v5.2 by Sebastian Rahtz. Many thanks to
%Sebastian for letting me use his code!}
%
%\DescribeEnv{pifont}
%    \begin{macrocode}
\DeclareOption{pifont}{
%    \end{macrocode}
% Now some useful commands for Pi fonts (Dingbats, Symbol etc); they
% all assume you know the character number of the (unmapped) font
%    \begin{macrocode}
\newcommand{\Pifont}[1]{\fontfamily{#1}\fontencoding{U}%
\fontseries{m}\fontshape{n}\selectfont}
\newcommand{\Pisymbol}[2]{{\Pifont{#1}\char#2}}
\newcommand{\Pifill}[2]{\leaders\hbox{\makebox[0.2in]{%
       \Pisymbol{#1}{#2}}}\hfill\kern\z@}
\newcommand{\Piline}[2]{\par\noindent\hspace{0.5in}\Pifill{#1}{#2}%
       \hspace{0.5in}\kern\z@\par}
\newenvironment{Pilist}[2]%
{\begin{list}{\Pisymbol{#1}{#2}}{}}%
{\end{list}}%
%    \end{macrocode}
% A Pi number generator (from ideas by David Carlisle), for use in
% lists where items are suffixed by symbols taken in sequence from a
% Pi font. Usage is in lists just like enumerate.
%
% |\Pinumber| outputs the appropriate symbol, where |#2| is the name of a
% \LaTeX\ counter  and |#1| is the font family.
%    \begin{macrocode}
\def\Pinumber#1#2{\protect\Pisymbol{#1}{\arabic{#2}}}
\newenvironment{Piautolist}[2]{%
\ifnum \@enumdepth >3 \@toodeep\else
      \advance\@enumdepth \@ne
%    \end{macrocode}
% We force the labels and cross-references into a very plain style (eg
% no brackets around `numbers', or dots after them).
%    \begin{macrocode}
      \edef\@enumctr{enum\romannumeral\the\@enumdepth}%
  \expandafter\def\csname p@enum\romannumeral\the\@enumdepth\endcsname{}%
  \expandafter\def\csname labelenum\romannumeral\the\@enumdepth\endcsname{%
     \csname theenum\romannumeral\the\@enumdepth\endcsname}%
  \expandafter\def\csname theenum\romannumeral\the\@enumdepth\endcsname{%
     \Pinumber{#1}{enum\romannumeral\the\@enumdepth}}%
  \list{\csname label\@enumctr\endcsname}{%
        \@nmbrlisttrue
        \def\@listctr{\@enumctr}%
        \setcounter{\@enumctr}{#2}%
        \addtocounter{\@enumctr}{-1}%
        \def\makelabel##1{\hss\llap{##1}}}
\fi
}{\endlist}
%    \end{macrocode}
% All the old Dingbat commands still work.
%    \begin{macrocode}
\newcommand{\ding}{\Pisymbol{pzd}}
\def\dingfill#1{\leaders\hbox{\makebox[0.2in]{\Pisymbol{pzd}{#1}}}\hfill}
\def\dingline#1{\Piline{pzd}{#1}}
\newenvironment{dinglist}[1]{\begin{Pilist}{pzd}{#1}}%
  {\end{Pilist}}
\newenvironment{dingautolist}[1]{\begin{Piautolist}{pzd}{#1}}%
  {\end{Piautolist}}
{\Pifont{pzd}}
{\Pifont{psy}}
}
%    \end{macrocode}
%\DescribeEnv{mathptm}
%    \begin{macrocode}
\DeclareOption{mathptm}{
%    \end{macrocode}
%This package loads the Adobe Times fonts and the mathptm fonts;
%The virtual fonts are produced by fontinst; they 
%can be built by running tex on
%fontptcm.tex from the fontinst package.
%    \begin{macrocode}
% The main text family is Times Roman
\def\rmdefault{ptm}
\DeclareSymbolFont{operators}   {OT1}{ptmcm}{m}{n}
\DeclareSymbolFont{letters}     {OML}{ptmcm}{m}{it}
\DeclareSymbolFont{symbols}     {OMS}{pzccm}{m}{n}
\DeclareSymbolFont{largesymbols}{OMX}{psycm}{m}{n}
\DeclareSymbolFont{bold}        {OT1}{ptm}{bx}{n}
\DeclareSymbolFont{italic}      {OT1}{ptm}{m}{it}
%    \end{macrocode}
% If we're in compatibility mode, defined |\mathbf| and |\mathit|.
%    \begin{macrocode}
\@ifundefined{mathbf}{}{\DeclareMathAlphabet{\mathbf}{OT1}{ptm}{bx}{n}}
\@ifundefined{mathit}{}{\DeclareMathAlphabet{\mathit}{OT1}{ptm}{m}{it}}
%    \end{macrocode}
% An |\omicron| command, to fill the gap.
%    \begin{macrocode}
\DeclareMathSymbol{\omicron}{0}{operators}{`\o}
%    \end{macrocode}
% Reduce the space around math operators
%    \begin{macrocode}
\thinmuskip=2mu
\medmuskip=2.5mu plus 1mu minus 1mu
\thickmuskip=4mu plus 1.5mu minus 1mu
%    \end{macrocode}
% No bold math.
%    \begin{macrocode}
\def\boldmath{%
   \@warning{there is no bold Symbol font}%
   \global\let\boldmath=\relax
}
\DeclareMathSizes{5}{5}{5}{5}
\DeclareMathSizes{6}{6}{5}{5}
\DeclareMathSizes{7}{7}{5}{5}
\DeclareMathSizes{8}{8}{6}{5}
\DeclareMathSizes{9}{9}{7}{5}
\DeclareMathSizes{10}{10}{7.4}{6}
\DeclareMathSizes{10.95}{10.95}{8}{6}
\DeclareMathSizes{12}{12}{9}{7}
\DeclareMathSizes{14.4}{14.4}{10.95}{8}
\DeclareMathSizes{17.28}{17.28}{12}{10}
\DeclareMathSizes{20.74}{20.74}{14.4}{12}
\DeclareMathSizes{24.88}{24.88}{17.28}{14.4}
}
%    \end{macrocode}
%
%\subsection{The end}
%
%At last, the options are processed.
%
%    \begin{macrocode}
\ProcessOptions
%</package>
%    \end{macrocode}
%
%\section{Additional font definitions from \textsf{psfonts}}
%
%\textit{This is again code from \textsf{psfonts} by Sebastian Rahtz. It
%contains some font definitions for Adobe Symbol and Adobe Zapf Dingbats.}
%
% \subsection{Adobe Symbol font}
%    \begin{macrocode}
%<*Upsy>
\typeout{File \space Upsy.fd\space loading \space Adobe\space Symbol}%
\DeclareFontFamily{U}{psy}{}%
\DeclareFontShape{U}{psy}{m}{n}{<->psyr}{}%
\DeclareFontShape{U}{psy}{m}{i}{<->ssub * psy/m/n}{}%
%</Upsy>
%    \end{macrocode}
% \subsection{Adobe Zapf Dingbats}
%    \begin{macrocode}
%<*Upzd>
\typeout{File \space Upzd.fd\space loading \space Adobe\space ZapfDingbats}%
\DeclareFontFamily{U}{pzd}{}%
\DeclareFontShape{U}{pzd}{m}{n}{<->pzdr}{}%
%</Upzd>
%    \end{macrocode}
%
%\Finale
%
%\section{ToDo}
%
%There is mainly one things that this package is missing till now:
%
%\begin{itemize}
%\item If the package has been loaded without any local options, it should act
%as if the option \texttt{onlyps} had been called. I unfortunately do not know
%how to detect this.
%\end{itemize}
%
%\section{Legal rubbish}
%\psfont: A \LaTeXe\ package for using PostScript fonts
%
%Copyright \copyright\ 1996 Sebastian Marius Kirsch\texttt{%
% $\langle$sebastian\_kirsch@kl.maus.de$\rangle$}
%
%This program is free software; you can redistribute it and/or modify
%it under the terms of the GNU General Public License as published by
%the Free Software Foundation; either version 2 of the License, or
%(at your option) any later version.
%
%This program is distributed in the hope that it will be useful,
%but WITHOUT ANY WARRANTY; without even the implied warranty of
%MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
%GNU General Public License for more details.
%
%You should have received a copy of the GNU General Public License
%along with this program; if not, write to the Free Software
%Foundation, Inc., 675 Mass Ave, Cambridge, MA 02139, USA.
%
\endinput