#!/usr/bin/env perl # On a UNIX-like system, the above enables latexmk to run independently # of the location of the perl executable. This line relies on the # existence of the program /usr/bin/env # If there is a problem for any reason, you can replace the first line of # this file by: #!/usr/bin/perl -w # with the path of the perl executable adjusted for your system. use warnings; # Delete #??!! when working # See ?? <=============================== ## ?? Issues with clean-up ## List of aux files deleted is those read, not those generated. ## Other files are generated by (pdf)latex; should they be deleted? ## (I have hooks for this). #======================================= #?? Force mode doesn't appear to do force (if error in latex file) #??? Get banner back in. #?? CORRECT DIAGNOSTICS ON CHANGED FILES IF THEY DIDN'T EXIST BEFORE #?? Further corrections to deal with disappeared source files for custom dependencies. # Message repeatedly appears about remake when source file of cusdep doesn't exist. #?? logfile w/o fdb file: don't set changed file, perhaps for generated exts. # Reconsider #?? Do proper run-stuff for bibtex, makeindex, cus-deps. OK I think # Parse and correctly find bst and ist files # ATTEMPT TO ALLOW FILENAMES WITH SPACES: # (as of 1 Apr 2006, and then 14 Sep. 2007) # Problems: # A. Quoting filenames will not always work. # a. Under UNIX, quotes are legal in filenames, so when PERL # directly runs a binary, a quoted filename will be treated as # as a filename containing a quote character. But when it calls # a shell, the quotes are handled by the shell as quotes. # b. Under MSWin32, quotes are illegal filename characters, and tend # to be handled correctly. # c. But under cygwin, results are not so clear (there are many # combinations: native v. cygwin perl, native v cygwin programs # NT v. unix scripts, which shell is called. # B. TeX doesn't always handle filenames with spaces gracefully. # a. UNIX/LINUX: The version on gluon2 Mar 31, 2006 to Sep. 2007) # doesn't handle them at all. (TeX treats space as separator.) # b. At least some later versions actually do (Brad Miller e-mail, # Sep. 2007). # c. fptex [[e-TeXk, Version 3.141592-2.1 (Web2c 7.5.2)] does, on # my MSWin at home. In \input the filename must be in quotes. # d. Bibtex [BibTeX (Web2c 7.5.2) 0.99c on my MSWin system at home, # Sep. 2007] does not allow names of bibfiles to have spaces. # C. =====> Using the shell for command lines is not safe, since special # characters can cause lots of mayhem. # It will therefore be a good idea to sanitize filenames. # # I've sanitized all calls out: # a. system and exec use a single argument, which forces # use of shell, under all circumstances # Thus I can safely use quotes on filenames: They will be handled by # the shell under UNIX, and simply passed on to the program under MSWin32. # b. I reorganized Run, Run_Detached to use single command line # c. All calls to Run and Run_Detached have quoted filenames. # d. So if a space-free filename with wildcards is given on latexmk's # command line, and it globs to space-containing filename(s), that # works (fptex on home computer, native NT tex) # e. ====> But globbing fails: the glob function takes space as filename # separator. ==================== #================= TO DO ================ # # 1. See ?? ESPECIALLY $MSWin_fudge_break # 2. Check fudged conditions in looping and make_files # 3. Should not completely abort after a run that ends in failure from latex # Missing input files (including via custom dependency) should be checked for # a change in status # If sources for missing files from custom dependency # are available, then do a rerun # If sources of any kind become available rerun (esp. for pvc) # rerun # Must parse log_file after unsuccessful run of latex: it may give # information about missing files. # 4. Check file of bug reports and requests # 5. Rationalize bibtex warnings and errors. Two almost identical routines. # Should 1. Use single routine # 2. Convert errors to failure only in calling routine # 3. Save first warning/error. # To do: # Rationalize again handling of include files. # Now I use kpsewhich to do searches, if file not found # (How do I avoid getting slowed down too much?) # Document the assumptions at each stage of processing algorithm. # Option to restart previewer automatically, if it dies under -pvc # Test for already running previewer gets wrong answer if another # process has the viewed file in its command line $my_name = 'latexmk'; $My_name = 'Latexmk'; $version_num = '4.10'; $version_details = "$My_name, John Collins, 21 August 2009"; use Config; use File::Copy; use File::Basename; use FileHandle; use File::Find; use Cwd; # To be able to change cwd use Cwd "chdir"; # Ensure $ENV{PWD} tracks cwd use Digest; #use strict; # The following variables are assigned once and then used in symbolic # references, so we need to avoid warnings 'name used only once': use vars qw( $dvi_update_command $ps_update_command $pdf_update_command ); # Translation of signal names to numbers and vv: %signo = (); @signame = (); if ( defined $Config{sig_name} ) { $i = 0; foreach $name (split(' ', $Config{sig_name})) { $signo{$name} = $i; $signame[$i] = $name; $i++; } } else { warn "Something wrong with the perl configuration: No signals?\n"; } ## Copyright John Collins 1998-2009 ## (username collins at node phys.psu.edu) ## (and thanks to David Coppit (username david at node coppit.org) ## for suggestions) ## Copyright Evan McLean ## (modifications up to version 2) ## Copyright 1992 by David J. Musliner and The University of Michigan. ## (original version) ## ## This program is free software; you can redistribute it and/or modify ## it under the terms of the GNU General Public License as published by ## the Free Software Foundation; either version 2 of the License, or ## (at your option) any later version. ## ## This program is distributed in the hope that it will be useful, ## but WITHOUT ANY WARRANTY; without even the implied warranty of ## MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the ## GNU General Public License for more details. ## ## You should have received a copy of the GNU General Public License ## along with this program; if not, write to the Free Software ## Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307 ## ## ## ## NEW FEATURES, since v. 2.0: ## 1. Correct algorithm for deciding how many times to run latex: ## based on whether source file(s) change between runs ## 2. Continuous preview works, and can be of ps file or dvi file ## 3. pdf creation by pdflatex possible ## 4. Defaults for commands are OS dependent. ## 5. Parsing of log file instead of source file is used to ## obtain dependencies, by default. ## ## Modification log from 21 Aug 2009 onwards in detail ## ## 21 Aug 2009, John Collins V. 4.10 for CTAN release. ## ## 1998-2009, John Collins. Many improvements and fixes. ## See CHANGE-log.txt for full list, and CHANGES for summary ## ## Modified by Evan McLean (no longer available for support) ## Original script (RCS version 2.3) called "go" written by David J. Musliner ## ## 2.0 - Final release, no enhancements. LatexMk is no longer supported ## by the author. ## 1.9 - Fixed bug that was introduced in 1.8 with path name fix. ## - Fixed buglet in man page. ## 1.8 - Add not about announcement mailling list above. ## - Added texput.dvi and texput.aux to files deleted with -c and/or ## the -C options. ## - Added landscape mode (-l option and a bunch of RC variables). ## - Added sensing of "\epsfig{file=...}" forms in dependency generation. ## - Fixed path names when specified tex file is not in the current ## directory. ## - Fixed combined use of -pvc and -s options. ## - Fixed a bunch of speling errors in the source. :-) ## - Fixed bugs in xdvi patches in contrib directory. ## 1.7 - Fixed -pvc continuous viewing to reattach to pre-existing ## process correctly. ## - Added $pscmd to allow changing process grepping for different ## systems. ## 1.6 - Fixed buglet in help message ## - Fixed bugs in detection of input and include files. ## 1.5 - Removed test message I accidentally left in version 1.4 ## - Made dvips use -o option instead of stdout redirection as some ## people had problems with dvips not going to stdout by default. ## - Fixed bug in input and include file detection ## - Fixed dependency resolution process so it detects new .toc file ## and makeindex files properly. ## - Added dvi and postscript filtering options -dF and -pF. ## - Added -v version commmand. ## 1.4 - Fixed bug in -pvc option. ## - Made "-F" option include non-existant file in the dependency list. ## (RC variable: $force_include_mode) ## - Added .lot and .lof files to clean up list of extensions. ## - Added file "texput.log" to list of files to clean for -c. ## - LatexMk now handles file names in a similar fashion to latex. ## The ".tex" extension is no longer enforced. ## - Added $texfile_search RC variable to look for default files. ## - Fixed \input and \include so they add ".tex" extension if necessary. ## - Allow intermixing of file names and options. ## - Added "-d" and banner options (-bm, -bs, and -bi). ## (RC variables: $banner, $banner_message, $banner_scale, ## $banner_intensity, $tmpdir) ## - Fixed "-r" option to detect an command line syntax errors better. ## 1.3 - Added "-F" option, patch supplied by Patrick van der Smagt. ## 1.2 - Added "-C" option. ## - Added $clean_ext and $clean_full_ext variables for RC files. ## - Added custom dependency generation capabilities. ## - Added command line and variable to specify custom RC file. ## - Added reading of rc file in current directly. ## 1.1 - Fixed bug where Dependency file generation header is printed ## rependatively. ## - Fixed bug where TEXINPUTS path is searched for file that was ## specified with absolute an pathname. ## 1.0 - Ripped from script by David J. Musliner (RCS version 2.3) called "go" ## - Fixed a couple of file naming bugs ## e.g. when calling latex, left the ".tex" extension off the end ## of the file name which could do some interesting things ## with some file names. ## - Redirected output of dvips. My version of dvips was a filter. ## - Cleaned up the rc file mumbo jumbo and created a dependency file ## instead. Include dependencies are always searched for if a ## dependency file doesn't exist. The -i option regenerates the ## dependency file. ## Getting rid of the rc file stuff also gave the advantage of ## not being restricted to one tex file per directory. ## - Can specify multiple files on the command line or no files ## on the command line. ## - Removed lpr options stuff. I would guess that generally, ## you always use the same options in which case they can ## be set up from an rc file with the $lpr variable. ## - Removed the dviselect stuff. If I ever get time (or money :-) ) ## I might put it back in if I find myself needing it or people ## express interest in it. ## - Made it possible to view dvi or postscript file automatically ## depending on if -ps option selected. ## - Made specification of dvi file viewer seperate for -pv and -pvc ## options. ##----------------------------------------------------------------------- ## Explicit exit codes: ## 10 = bad command line arguments ## 11 = file specified on command line not found ## or other file not found ## 12 = failure in some part of making files ## 13 = error in initialization file ## 20 = probable bug ## or retcode from called program. #Line length in log file that indicates wrapping. # This number EXCLUDES line-end characters, and is one-based # It is the parameter max_print_line in the TeX program. (tex.web) $log_wrap = 79; ######################################################################### ## Default parsing and file-handling settings ## Array of reg-exps for patterns in log-file for file-not-found ## Each item is the string in a regexp, without the enclosing slashes. ## First parenthesized part is the filename. ## Note the need to quote slashes and single right quotes to make them ## appear in the regexp. ## Add items by push, e.g., ## push @file_not_found, '^No data file found `([^\\\']*)\\\''; ## will give match to line starting "No data file found `filename'" @file_not_found = ( '^No file\\s*(.*)\\.$', '^\\! LaTeX Error: File `([^\\\']*)\\\' not found\\.', '.*?:\\d*: LaTeX Error: File `([^\\\']*)\\\' not found\\.', '^LaTeX Warning: File `([^\\\']*)\\\' not found', '^Package .* [fF]ile `([^\\\']*)\\\' not found', 'Error: pdflatex \(file ([^\)]*)\): cannot find image file', ); ## Hash mapping file extension (w/o period, e.g., 'eps') to a single regexp, # whose matching by a line in a file with that extension indicates that the # line is to be ignored in the calculation of the hash number (md5 checksum) # for the file. Typically used for ignoring datestamps in testing whether # a file has changed. # Add items e.g., by # $hash_calc_ignore_pattern{'eps'} = '^%%CreationDate: '; # This makes the hash calculation for an eps file ignore lines starting with # '%%CreationDate: ' # ?? Note that a file will be considered changed if # (a) its size changes # or (b) its hash changes # So it is useful to ignore lines in the hash calculation only if they # are of a fixed size (as with a date/time stamp). %hash_calc_ignore_pattern =(); ######################################################################### ## Default document processing programs, and related settings, ## These are mostly the same on all systems. ## Most of these variables represents the external command needed to ## perform a certain action. Some represent switches. ## Commands to invoke latex, pdflatex $latex = 'latex %O %S'; $pdflatex = 'pdflatex %O %S'; ## Switch(es) to make them silent: $latex_silent_switch = '-interaction=batchmode'; $pdflatex_silent_switch = '-interaction=batchmode'; # %input_extensions maps primary_rule_name to pointer to hash of file extensions # used for extensionless files specified in the source file by constructs # like \input{file} \includegraphics{file} # Could write #%input_extensions = ( 'latex' => { 'tex' => 1, 'eps' => 1 };, # 'pdflatex' => { 'tex' => 1, 'pdf' => 1, 'jpg' => 1, 'png' => 1 }; ); # Instead we'll exercise the user-friendly access routines: add_input_ext( 'latex', 'tex', 'eps' ); add_input_ext( 'pdflatex', 'tex', 'jpg', 'pdf' ); #show_input_ext( 'latex' ); show_input_ext( 'pdflatex' ); ## Command to invoke bibtex $bibtex = 'bibtex %O %B'; # Switch(es) to make bibtex silent: $bibtex_silent_switch = '-terse'; ## Command to invoke makeindex $makeindex = 'makeindex %O -o %D %S'; # Switch(es) to make makeinex silent: $makeindex_silent_switch = '-q'; ## Command to convert dvi file to pdf file directly: $dvipdf = 'dvipdf %O %S %D'; ## Command to convert dvi file to ps file: $dvips = 'dvips %O -o %D %S'; ## Command to convert dvi file to ps file in landscape format: $dvips_landscape = 'dvips -tlandscape %O -o %D %S'; # Switch(es) to get dvips to make ps file suitable for conversion to good pdf: # (If this is not used, ps file and hence pdf file contains bitmap fonts # (type 3), which look horrible under acroread. An appropriate switch # ensures type 1 fonts are generated. You can put this switch in the # dvips command if you prefer.) $dvips_pdf_switch = '-P pdf'; # Switch(es) to make dvips silent: $dvips_silent_switch = '-q'; ## Command to convert ps file to pdf file: $ps2pdf = 'ps2pdf %O %S %D'; ## Command to search for tex-related files $kpsewhich = 'kpsewhich %S'; ##Printing: $print_type = 'ps'; # When printing, print the postscript file. # Possible values: 'dvi', 'ps', 'pdf', 'none' ## Which treatment of default extensions and filenames with ## multiple extensions is used, for given filename on ## tex/latex's command line? See sub find_basename for the ## possibilities. ## Current tex's treat extensions like UNIX teTeX: $extension_treatment = 'unix'; $dvi_update_signal = undef; $ps_update_signal = undef; $pdf_update_signal = undef; $dvi_update_command = undef; $ps_update_command = undef; $pdf_update_command = undef; $new_viewer_always = 0; # If 1, always open a new viewer in pvc mode. # If 0, only open a new viewer if no previous # viewer for the same file is detected. $quote_filenames = 1; # Quote filenames in external commands ######################################################################### ################################################################ ## Special variables for system-dependent fudges, etc. $log_file_binary = 0; # Whether to treat log file as binary # Normally not, since the log file SHOULD be pure text. # But Miktex 2.7 sometimes puts binary characters # in it. (Typically in construct \OML ... after # overfull box with mathmode.) # Sometimes there is ctrl/Z, which is not only non-text, # but is end-of-file marker for MS-Win in text mode. $MSWin_fudge_break = 1; # Give special treatment to ctrl/C and ctrl/break # in -pvc mode under MSWin # Under MSWin32 (at least with perl 5.8 and WinXP) # when latemk is running another program, and the # user gives ctrl/C or ctrl/break, to stop the # daughter program, not only does it reach # the daughter, but also latexmk/perl, so # latexmk is stopped also. In -pvc mode, # this is not normally desired. So when the # $MSWin_fudge_break variable is set, # latexmk arranges to ignore ctrl/C and # ctrl/break during processing of files; # only the daughter programs receive them. # This fudge is not applied in other # situations, since then having latexmk also # stopping because of the ctrl/C or # ctrl/break signal is desirable. # The fudge is not needed under UNIX (at least # with Perl 5.005 on Solaris 8). Only the # daughter programs receive the signal. In # fact the inverse would be useful: In # normal processing, as opposed to -pvc, if # force mode (-f) is set, a ctrl/C is # received by a daughter program does not # also stop latexmk. Under tcsh, we get # back to a command prompt, while latexmk # keeps running in the background! ################################################################ # System-dependent overrides: if ( $^O eq "MSWin32" ) { # Pure MSWindows configuration ## Configuration parameters: ## Use first existing case for $tmpdir: $tmpdir = $ENV{TMPDIR} || $ENV{TEMP} || '.'; $log_file_binary = 1; # Protect against ctrl/Z in log file from # Miktex 2.7. ## List of possibilities for the system-wide initialization file. ## The first one found (if any) is used. @rc_system_files = ( 'C:/latexmk/LatexMk' ); $search_path_separator = ';'; # Separator of elements in search_path # For both fptex and miktex, the following makes error messages explicit: $latex_silent_switch = '-interaction=batchmode -c-style-errors'; $pdflatex_silent_switch = '-interaction=batchmode -c-style-errors'; # For a pdf-file, "start x.pdf" starts the pdf viewer associated with # pdf files, so no program name is needed: $pdf_previewer = 'start %O %S'; $ps_previewer = 'start %O %S'; $ps_previewer_landscape = $ps_previewer; $dvi_previewer = 'start %O %S'; $dvi_previewer_landscape = "$dvi_previewer"; # Viewer update methods: # 0 => auto update: viewer watches file (e.g., gv) # 1 => manual update: user must do something: e.g., click on window. # (e.g., ghostview, MSWIN previewers, acroread under UNIX) # 2 => send signal. Number of signal in $dvi_update_signal, # $ps_update_signal, $pdf_update_signal # 3 => viewer can't update, because it locks the file and the file # cannot be updated. (acroread under MSWIN) # 4 => run a command to force the update. The commands are # specified by the variables $dvi_update_command, # $ps_update_command, $pdf_update_command $dvi_update_method = 1; $ps_update_method = 1; $pdf_update_method = 3; # acroread locks the pdf file # Use NONE as flag that I am not implementing some commands: $lpr = 'NONE $lpr variable is not configured to allow printing of ps files'; $lpr_dvi = 'NONE $lpr_dvi variable is not configured to allow printing of dvi files'; $lpr_pdf = 'NONE $lpr_pdf variable is not configured to allow printing of pdf files'; # The $pscmd below holds a command to list running processes. It # is used to find the process ID of the viewer looking at the # current output file. The output of the command must include the # process number and the command line of the processes, since the # relevant process is identified by the name of file to be viewed. # Its use is not essential. $pscmd = 'NONE $pscmd variable is not configured to detect running processes'; $pid_position = -1; # offset of PID in output of pscmd. # Negative means I cannot use ps } elsif ( $^O eq "cygwin" ) { # The problem is a mixed MSWin32 and UNIX environment. # Perl decides the OS is cygwin in two situations: # 1. When latexmk is run from a cygwin shell under a cygwin # environment. Perl behaves in a UNIX way. This is OK, since # the user is presumably expecting UNIXy behavior. # 2. When CYGWIN exectuables are in the path, but latexmk is run # from a native NT shell. Presumably the user is expecting NT # behavior. But perl behaves more UNIXy. This causes some # clashes. # The issues to handle are: # 1. Perl sees both MSWin32 and cygwin filenames. This is # normally only an advantage. # 2. Perl uses a UNIX shell in the system command # This is a nasty problem: under native NT, there is a # start command that knows about NT file associations, so that # we can do, e.g., (under native NT) system("start file.pdf"); # But this won't work when perl has decided the OS is cygwin, # even if it is invoked from a native NT command line. An # NT command processor must be used to deal with this. # 3. External executables can be native NT (which only know # NT-style file names) or cygwin executables (which normally # know both cygwin UNIX-style file names and NT file names, # but not always; some do not know about drive names, for # example). # Cygwin executables for tex and latex may only know cygwin # filenames. # 4. The BIBINPUTS and TEXINPUTS environment variables may be # UNIX-style or MSWin-style depending on whether native NT or # cygwin executables are used. They are therefore parsed # differently. Here is the clash: # a. If a user is running under an NT shell, is using a # native NT installation of tex (e.g., fptex or miktex), # but has the cygwin executables in the path, then perl # detects the OS as cygwin, but the user needs NT # behavior from latexmk. # b. If a user is running under an UNIX shell in a cygwin # environment, and is using the cygwin installation of # tex, then perl detects the OS as cygwin, and the user # needs UNIX behavior from latexmk. # Latexmk has no way of detecting the difference. The two # situations may even arise for the same user on the same # computer simply by changing the order of directories in the # path environment variable ## Configuration parameters: We'll assume native NT executables. ## The user should override if they are not. # This may fail: perl converts MSWin temp directory name to cygwin # format. Names containing this string cannot be handled by native # NT executables. $tmpdir = $ENV{TMPDIR} || $ENV{TEMP} || '.'; ## List of possibilities for the system-wide initialization file. ## The first one found (if any) is used. ## We can stay with MSWin files here, since perl understands them, @rc_system_files = ( 'C:/latexmk/LatexMk' ); $search_path_separator = ';'; # Separator of elements in search_path # This is tricky. The search_path_separator depends on the kind # of executable: native NT v. cygwin. # So the user will have to override this. # For both fptex and miktex, the following makes error messages explicit: $latex_silent_switch = '-interaction=batchmode -c-style-errors'; $pdflatex_silent_switch = '-interaction=batchmode -c-style-errors'; # We will assume that files can be viewed by native NT programs. # Then we must fix the start command/directive, so that the # NT-native start command of a cmd.exe is used. # For a pdf-file, "start x.pdf" starts the pdf viewer associated with # pdf files, so no program name is needed: $start_NT = "cmd /c start \"\""; $pdf_previewer = "$start_NT %O %S"; $ps_previewer = "$start_NT %O %S"; $ps_previewer_landscape = $ps_previewer; $dvi_previewer = "$start_NT %O %S"; $dvi_previewer_landscape = $dvi_previewer; # Viewer update methods: # 0 => auto update: viewer watches file (e.g., gv) # 1 => manual update: user must do something: e.g., click on window. # (e.g., ghostview, MSWIN previewers, acroread under UNIX) # 2 => send signal. Number of signal in $dvi_update_signal, # $ps_update_signal, $pdf_update_signal # 3 => viewer can't update, because it locks the file and the file # cannot be updated. (acroread under MSWIN) $dvi_update_method = 1; $ps_update_method = 1; $pdf_update_method = 3; # acroread locks the pdf file # Use NONE as flag that I am not implementing some commands: $lpr = 'NONE $lpr variable is not configured to allow printing of ps files'; $lpr_dvi = 'NONE $lpr_dvi variable is not configured to allow printing of dvi files'; $lpr_pdf = 'NONE $lpr_pdf variable is not configured to allow printing of pdf files'; # The $pscmd below holds a command to list running processes. It # is used to find the process ID of the viewer looking at the # current output file. The output of the command must include the # process number and the command line of the processes, since the # relevant process is identified by the name of file to be viewed. # Its use is not essential. # When the OS is detected as cygwin, there are two possibilities: # a. Latexmk was run from an NT prompt, but cygwin is in the # path. Then the cygwin ps command will not see commands # started from latexmk. So we cannot use it. # b. Latexmk was started within a cygwin environment. Then # the ps command works as we need. # Only the user, not latemk knows which, so we default to not # using the ps command. The user can override this in a # configuration file. $pscmd = 'NONE $pscmd variable is not configured to detect running processes'; $pid_position = -1; # offset of PID in output of pscmd. # Negative means I cannot use ps } else { # Assume anything else is UNIX or clone ## Configuration parameters: ## Use first existing case for $tmpdir: $tmpdir = $ENV{TMPDIR} || '/tmp'; ## List of possibilities for the system-wide initialization file. ## The first one found (if any) is used. ## Normally on a UNIX it will be in a subdirectory of /opt/local/share or ## /usr/local/share, depending on the local conventions. ## /usr/local/lib/latexmk/LatexMk is put in the list for ## compatibility with older versions of latexmk. @rc_system_files = ( '/opt/local/share/latexmk/LatexMk', '/usr/local/share/latexmk/LatexMk', '/usr/local/lib/latexmk/LatexMk' ); $search_path_separator = ':'; # Separator of elements in search_path $dvi_update_signal = $signo{USR1} if ( defined $signo{USR1} ); # Suitable for xdvi $ps_update_signal = $signo{HUP} if ( defined $signo{HUP} ); # Suitable for gv $pdf_update_signal = $signo{HUP} if ( defined $signo{HUP} ); # Suitable for gv ## default document processing programs. # Viewer update methods: # 0 => auto update: viewer watches file (e.g., gv) # 1 => manual update: user must do something: e.g., click on window. # (e.g., ghostview, MSWIN previewers, acroread under UNIX) # 2 => send signal. Number of signal in $dvi_update_signal, # $ps_update_signal, $pdf_update_signal # 3 => viewer can't update, because it locks the file and the file # cannot be updated. (acroread under MSWIN) # 4 => Run command to update. Command in $dvi_update_command, # $ps_update_command, $pdf_update_command. $dvi_previewer = 'start xdvi %O %S'; $dvi_previewer_landscape = 'start xdvi -paper usr %O %S'; if ( defined $dvi_update_signal ) { $dvi_update_method = 2; # xdvi responds to signal to update } else { $dvi_update_method = 1; } # if ( defined $ps_update_signal ) { # $ps_update_method = 2; # gv responds to signal to update # $ps_previewer = 'start gv -nowatch'; # $ps_previewer_landscape = 'start gv -swap -nowatch'; # } else { # $ps_update_method = 0; # gv -watch watches the ps file # $ps_previewer = 'start gv -watch'; # $ps_previewer_landscape = 'start gv -swap -watch'; # } # Turn off the fancy options for gv. Regular gv likes -watch etc # GNU gv likes --watch etc. User must configure $ps_update_method = 0; # gv -watch watches the ps file $ps_previewer = 'start gv %O %S'; $ps_previewer_landscape = 'start gv -swap %O %S'; $pdf_previewer = 'start acroread %O %S'; $pdf_update_method = 1; # acroread under unix needs manual update $lpr = 'lpr %O %S'; # Assume lpr command prints postscript files correctly $lpr_dvi = 'NONE $lpr_dvi variable is not configured to allow printing of dvi files'; $lpr_pdf = 'NONE $lpr_pdf variable is not configured to allow printing of pdf files'; # The $pscmd below holds a command to list running processes. It # is used to find the process ID of the viewer looking at the # current output file. The output of the command must include the # process number and the command line of the processes, since the # relevant process is identified by the name of file to be viewed. # Uses: # 1. In preview_continuous mode, to save running a previewer # when one is already running on the relevant file. # 2. With xdvi in preview_continuous mode, xdvi must be # signalled to make it read a new dvi file. # # The following works on Solaris, LINUX, HP-UX, IRIX # Use -f to get full listing, including command line arguments. # Use -u $ENV{CMD} to get all processes started by current user (not just # those associated with current terminal), but none of other users' # processes. $pscmd = "ps -f -u $ENV{USER}"; $pid_position = 1; # offset of PID in output of pscmd; first item is 0. if ( $^O eq "linux" ) { # Ps on Redhat (at least v. 7.2) appears to truncate its output # at 80 cols, so that a long command string is truncated. # Fix this with the --width option. This option works under # other versions of linux even if not necessary (at least # for SUSE 7.2). # However the option is not available under other UNIX-type # systems, e.g., Solaris 8. $pscmd = "ps --width 200 -f -u $ENV{USER}"; } elsif ( $^O eq "darwin" ) { # OS-X on Macintosh $lpr_pdf = 'lpr %O %S'; $pscmd = "ps -ww -u $ENV{USER}"; } } ## default parameters $max_repeat = 5; # Maximum times I repeat latex. Normally # 3 would be sufficient: 1st run generates aux file, # 2nd run picks up aux file, and maybe toc, lof which # contain out-of-date information, e.g., wrong page # references in toc, lof and index, and unresolved # references in the middle of lines. But the # formatting is more-or-less correct. On the 3rd # run, the page refs etc in toc, lof, etc are about # correct, but some slight formatting changes may # occur, which mess up page numbers in the toc and lof, # Hence a 4th run is conceivably necessary. # At least one document class (JHEP.cls) works # in such a way that a 4th run is needed. # We allow an extra run for safety for a # maximum of 5. Needing further runs is # usually an indication of a problem; further # runs may not resolve the problem, and # instead could cause an infinite loop. $clean_ext = ""; # space separated extensions of files that are # to be deleted when doing cleanup, beyond # standard set $clean_full_ext = ""; # space separated extensions of files that are # to be deleted when doing cleanup_full, beyond # standard set and those in $clean_ext @cus_dep_list = (); # Custom dependency list @default_files = ( '*.tex' ); # Array of LaTeX files to process when # no files are specified on the command line. # Wildcards allowed # Best used for project specific files. @default_excluded_files = ( ); # Array of LaTeX files to exclude when using # @default_files, i.e., when no files are specified # on the command line. # Wildcards allowed # Best used for project specific files. $texfile_search = ""; # Specification for extra files to search for # when no files are specified on the command line # and the @default_files variable is empty. # Space separated, and wildcards allowed. # These files are IN ADDITION to *.tex in current # directory. # This variable is obsolete, and only in here for # backward compatibility. $fdb_ext = 'fdb_latexmk'; # Extension for the file for latexmk's # file-database # Make it long to avoid possible collisions. $fdb_ver = 2; # Version number for kind of fdb_file. $jobname = ''; # Jobname: as with current tex, etc indicates # basename of generated files. # Defined so that --jobname=STRING on latexmk's # command line has same effect as with current # tex, etc. (If $jobname is non-empty, then # the --jobname=... option is used on tex.) ## default flag settings. $silent = 0; # silence latex's messages? $landscape_mode = 0; # default to portrait mode # The following two arrays contain lists of extensions (without # period) for files that are read in during a (pdf)LaTeX run but that # are generated automatically from the previous run, as opposed to # being user generated files (directly or indirectly from a custom # dependency). These files get two kinds of special treatment: # 1. In clean up, where depending on the kind of clean up, some # or all of these generated files are deleted. # (Note that special treatment is given to aux files.) # 2. In analyzing the results of a run of (pdf)LaTeX, to # determine if another run is needed. With an error free run, # a rerun should be provoked by a change in any source file, # whether a user file or a generated file. But with a run # that ends in an error, only a change in a user file during # the run (which might correct the error) should provoke a # rerun, but a change in a generated file should not. # These arrays can be user-configured. @generated_exts = ( 'aux', 'bbl', 'idx', 'ind', 'lof', 'lot', 'out', 'toc' ); # N.B. 'out' is generated by hyperref package # Which kinds of file do I have requests to make? # If no requests at all are made, then I will make dvi file # If particular requests are made then other files may also have to be # made. E.g., ps file requires a dvi file $dvi_mode = 0; # No dvi file requested $postscript_mode = 0; # No postscript file requested $pdf_mode = 0; # No pdf file requested to be made by pdflatex # Possible values: # 0 don't create pdf file # 1 to create pdf file by pdflatex # 2 to create pdf file by ps2pdf # 3 to create pdf file by dvipdf $view = 'default'; # Default preview is of highest of dvi, ps, pdf $sleep_time = 2; # time to sleep b/w checks for file changes in -pvc mode $banner = 0; # Non-zero if we have a banner to insert $banner_scale = 220; # Original default scale $banner_intensity = 0.95; # Darkness of the banner message $banner_message = 'DRAFT'; # Original default message $do_cd = 0; # Do not do cd to directory of source file. # Thus behave like latex. $dependents_list = 0; # Whether to display list(s) of dependencies @dir_stack = (); # Stack of pushed directories. $cleanup_mode = 0; # No cleanup of nonessential LaTex-related files. # $cleanup_mode = 0: no cleanup # $cleanup_mode = 1: full cleanup # $cleanup_mode = 2: cleanup except for dvi, # dviF, pdf, ps, & psF $cleanup_fdb = 0; # No removal of file for latexmk's file-database $cleanup_only = 0; # When doing cleanup, do not go-on to making files $cleanup_includes_generated = 0; # Determines whether cleanup deletes files generated by # (pdf)latex (found from \openout lines in log file). $diagnostics = 0; $dvi_filter = ''; # DVI filter command $ps_filter = ''; # Postscript filter command $force_mode = 0; # =1 to force processing past errors $force_include_mode = 0;# =1 to ignore non-existent files when testing # for dependency. (I.e., don't treat them as error) $go_mode = 0; # =1 to force processing regardless of time-stamps # =2 full clean-up first $preview_mode = 0; $preview_continuous_mode = 0; $printout_mode = 0; # Don't print the file # Do we make view file in temporary then move to final destination? # (To avoid premature updating by viewer). $always_view_file_via_temporary = 0; # Set to 1 if viewed file is always # made through a temporary. $pvc_view_file_via_temporary = 1; # Set to 1 if only in -pvc mode is viewed # file made through a temporary. # State variables initialized here: $updated = 0; # Flags when something has been remade # Used to allow convenient user message in -pvc mode $waiting = 0; # Flags whether we are in loop waiting for an event # Used to avoid unnecessary repeated o/p in wait loop # Used for some results of parsing log file: $reference_changed = 0; $bad_reference = 0; $bad_citation = 0; # Set search paths for includes. # Set them early so that they can be overridden $BIBINPUTS = $ENV{'BIBINPUTS'}; if (!$BIBINPUTS) { $BIBINPUTS = '.'; } #?? OBSOLETE $TEXINPUTS = $ENV{'TEXINPUTS'}; if (!$TEXINPUTS) { $TEXINPUTS = '.'; } # Convert search paths to arrays: # If any of the paths end in '//' then recursively search the # directory. After these operations, @BIBINPUTS should # have all the directories that need to be searched @BIBINPUTS = find_dirs1 ($BIBINPUTS); ###################################################################### ###################################################################### # # ??? UPDATE THE FOLLOWING!! # # We will need to determine whether source files for runs of various # programs are out of date. In a normal situation, this is done by # asking whether the times of the source files are later than the # destination files. But this won't work for us, since a common # situation is that a file is written on one run of latex, for # example, and read back in on the next run (e.g., an .aux file). # Some situations of this kind are standard in latex generally; others # occur with particular macro packages or with particular # postprocessors. # # The correct criterion for whether a source is out-of-date is # therefore NOT that its modification time is later than the # destination file, but whether the contents of the source file have # changed since the last successful run. This also handles the case # that the user undoes some changes to a source file by replacing the # source file by reverting to an earlier version, which may well have # an older time stamp. Since a direct comparison of old and new files # would involve storage and access of a large number of backup files, # we instead use the md5 signature of the files. (Previous versions # of latexmk used the backup file method, but restricted to the case # of .aux and .idx files, sufficient for most, but not all, # situations.) # # We will have a database of (time, size, md5) for the relevant # files. If the time and size of a file haven't changed, then the file # is assumed not to have changed; this saves us from having to # determine its md5 signature, which would involve reading the whole # file, which is naturally time-consuming, especially if network file # access to a server is needed, and many files are involved, when most # of them don't change. It is of course possible to change a file # without changing its size, but then to adjust its timestamp # to what it was previously; this requires a certain amount of # perversity. We can safely assume that if the user edits a file or # changes its contents, then the file's timestamp changes. The # interesting case is that the timestamp does change, because the file # has actually been written to, but that the contents do not change; # it is for this that we use the md5 signature. However, since # computing the md5 signature involves reading the whole file, which # may be large, we should avoid computing it more than necessary. # # So we get the following structure: # # 1. For each relevant run (latex, pdflatex, each instance of a # custom dependency) we have a database of the state of the # source files that were last used by the run. # 2. On an initial startup, the database for a primary tex file # is read that was created by a previous run of latex or # pdflatex, if this exists. # 3. If the file doesn't exist, then the criterion for # out-of-dateness for an initial run is that it goes by file # timestamps, as in previous versions of latexmk, with due # (dis)regard to those files that are known to be generated by # latex and re-read on the next run. # 4. Immediately before a run, the database is updated to # represent the current conditions of the run's source files. # 5. After the run, it is determined whether any of the source # files have changed. This covers both files written by the # run, which are therefore in a dependency loop, and files that # the user may have updated during the run. (The last often # happens when latex takes a long time, for a big document, # and the user makes edits before latex has finished. This is # particularly prevalent when latexmk is used with # preview-continuous mode.) # 6. In the case of latex or pdflatex, the custom dependencies # must also be checked and redone if out-of-date. # 7. If any source files have changed, the run is redone, # starting at step 1. # 8. There is naturally a limit on the number of reruns, to avoid # infinite loops from bugs and from pathological or unforeseen # conditions. # 9. After the run is done, the run's file database is updated. # (By hypothesis, the sizes and md5s are correct, if the run # is successful.) # 10. To allow reuse of data from previous runs, the file database # is written to a file after every complete set of passes # through latex or pdflatex. (Note that there is separate # information for latex and pdflatex; the necessary # information won't coincide: Out-of-dateness for the files # for each program concerns the properties of the files when # the other program was run, and the set of source files could # be different, e.g., for graphics files.) # # We therefore maintain the following data structures.: # # a. For each run (latex, pdflatex, each custom dependency) a # database is maintained. This is a hash from filenames to a # reference to an array: [time, size, md5]. The semantics of # the database is that it represents the state of the source # files used in the run. During a run it represents the state # immediately before the run; after a run, with all reruns, it # represents the state of the files used, modified by having # the latest timestamps for generated files. # b. There is a global database for all files, which represents # the current state. This saves having to recompute the md5 # signatures of a changed file used in more than one run # (e.g., latex and pdflatex). # c. Each of latex and pdflatex has a list of the relevant custom # dependencies. # # In all the following a fdb-hash is a hash of the form: # filename -> [time, size, md5] # If a file is found to disappear, its entry is removed from the hash. # In returns from fdb access routines, a size entry of -1 indicates a # non-existent file. # List of known rules. Rule types: primary, # external (calls program), internal (calls routine), cusdep. %possible_primaries = ( 'latex' => 'primary', 'pdflatex' => 'primary' ); %primaries = (); # Hash of rules for primary part of make. Keys are # currently 'latex', 'pdflatex' or both. Value is # currently irrelevant. Use hash for ease of lookup # Make remove this later, if use makeB # Hashes, whose keys give names of particular kinds of rule. We use # hashes for ease of lookup. %possible_one_time = ( 'view' => 1, 'print' => 1, 'update_view' => 1, ); %requested_filerules = (); # Hash for rules corresponding to requested files. # The keys are the rulenames and the value is # currently irrelevant. %one_time = (); # Hash for requested one-time-only rules, currently # possible values 'print' and 'view'. %rule_db = (); # Database of all rules: # Hash: rulename -> [array of rule data] # Rule data: # 0: [ cmd_type, ext_cmd, int_cmd, test_kind, # source, dest, base, out_of_date, # out_of_date_user, time_of_last_run, # last_result, last_message # ] # where # cmd_type is 'primary', 'external', or 'cusdep' # ext_cmd is string for associated external command # with substitutions (%D for destination, %S # for source, %B for base of current rule, # %R for base of primary tex file, %T for # texfile name, and %O for options. # int_cmd specifies any internal command to be # used to implement the application of the # rule. If this is present, it overrides # the external command, and it is the # responsibility of the perl subroutine # specified in intcmd to execute the # external command if this is appropriate. # This variable intcmd is a reference to an array, # $$intcmd[0] = internal routine # $$intcmd[1...] = its arguments (if any) # test_kind specifies method of determining # whether a file is out-of-date: # 0 for never # 1 for usual: whether there is a source # file change # 2 for dest earlier than source # 3 for method 2 at first run, 1 thereafter # (used when don't have file data from # previous run). # source = name of primary source file, if any # dest = name of primary destination file, # if any # base = base name, if any, of files for # this rule # out_of_date = 1 if it has been detected that # this rule needs to be run # (typically because a source # file has changed). # 0 otherwise # out_of_date_user is like out_of_date, except # that the detection of out-of-dateness # has been made from a change of a # putative user file, i.e., one that is # not a generated file (e.g., aux). This # kind of out-of-dateness should provoke a # rerun where or not there was an error # during a run of (pdf)LaTeX. Normally, # if there is an error, one should wait # for the user to correct the error. But # it is possible the error condition is # already corrected during the run, e.g., # by the user changing a source file in # response to an error message. # time_of_last_run = time that this rule was # last applied. (In standard units # from perl, to be directly compared # with file modification times.) # changed flags whether special changes have been made # that require file-existence status to be ignored # last_result is # -1 if no run has been made, # 0 if the last run was successful # 1 if last run was successful, but # failed to create an output file # 2 if last run failed # last_message is error message for last run # 1: {Hash sourcefile -> [source-file data] } # Source-file data array: # 0: time # 1: size # 2: md5 # 3: name of rule to make this file # 4: whether the file is of the kind made by epstopdf.sty # during a primary run. It will have been read during # the run, so that even though the file changes during # a primary run, there is no need to trigger another # run because of this. %fdb_current = (); # Fdb-hash for all files used. #================================================== ## Read rc files: # User's home directory $HOME = ''; if (exists $ENV{'HOME'} ) { $HOME = $ENV{'HOME'}; } elsif (exists $ENV{'USERPROFILE'} ) { $HOME = $ENV{'USERPROFILE'}; } sub read_first_rc_file_in_list { foreach my $rc_file ( @_ ) { #print "===Testing for rc file \"$rc_file\" ...\n"; if ( -e $rc_file ) { #print "===Reading rc file \"$rc_file\" ...\n"; process_rc_file( $rc_file ); return; } } } # Read system rc file: read_first_rc_file_in_list( @rc_system_files ); # Read user rc file. read_first_rc_file_in_list( "$HOME/.latexmkrc" ); # Read rc file in current directory. read_first_rc_file_in_list( "latexmkrc", ".latexmkrc" ); #================================================== #show_array ("BIBINPUTS", @BIBINPUTS); die; ## Process command line args. @command_line_file_list = (); $bad_options = 0; #print "Command line arguments:\n"; for ($i = 0; $i <= $#ARGV; $i++ ) { print "$i: '$ARGV[$i]'\n"; } while ($_ = $ARGV[0]) { # Make -- and - equivalent at beginning of option: s/^--/-/; shift; if (/^-c$/) { $cleanup_mode = 2; $cleanup_fdb = 1; $cleanup_only = 1; } elsif (/^-C$/ || /^-CA$/ ) { $cleanup_mode = 1; $cleanup_fdb = 1; $cleanup_only = 1; } elsif (/^-CF$/) { $cleanup_fdb = 1; } elsif (/^-cd$/) { $do_cd = 1; } elsif (/^-cd-$/) { $do_cd = 0; } elsif (/^-commands$/) { &print_commands; exit; } elsif (/^-d$/) { $banner = 1; } elsif (/^-dependents$/) { $dependents_list = 1; } elsif (/^-nodependents$/ || /^-dependents-$/) { $dependents_list = 0; } elsif (/^-dvi$/) { $dvi_mode = 1; } elsif (/^-dvi-$/) { $dvi_mode = 0; } elsif (/^-F$/) { $force_include_mode = 1; } elsif (/^-F-$/) { $force_include_mode = 0; } elsif (/^-f$/) { $force_mode = 1; } elsif (/^-f-$/) { $force_mode = 0; } elsif (/^-g$/) { $go_mode = 1; } elsif (/^-g-$/) { $go_mode = 0; } elsif (/^-gg$/) { $go_mode = 2; $cleanup_mode = 1; $cleanup_fdb = 1; $cleanup_only = 0; } elsif ( /^-h$/ || /^-help$/ ) { &print_help; exit;} elsif (/^-diagnostics/) { $diagnostics = 1; } elsif (/^-jobname=(.*)$/) { $jobname = $1; } elsif (/^-l$/) { $landscape_mode = 1; } elsif (/^-new-viewer$/) { $new_viewer_always = 1; } elsif (/^-new-viewer-$/) { $new_viewer_always = 0; } elsif (/^-l-$/) { $landscape_mode = 0; } elsif (/^-p$/) { $printout_mode = 1; $preview_continuous_mode = 0; # to avoid conflicts $preview_mode = 0; } elsif (/^-p-$/) { $printout_mode = 0; } elsif (/^-pdfdvi$/){ $pdf_mode = 3; } elsif (/^-pdfps$/) { $pdf_mode = 2; } elsif (/^-pdf$/) { $pdf_mode = 1; } elsif (/^-pdf-$/) { $pdf_mode = 0; } elsif (/^-print=(.*)$/) { $value = $1; if ( $value =~ /^dvi$|^ps$|^pdf$/ ) { $print_type = $value; $printout_mode = 1; } else { &exit_help("$My_name: unknown print type '$value' in option '$_'"); } } elsif (/^-ps$/) { $postscript_mode = 1; } elsif (/^-ps-$/) { $postscript_mode = 0; } elsif (/^-pv$/) { $preview_mode = 1; $preview_continuous_mode = 0; # to avoid conflicts $printout_mode = 0; } elsif (/^-pv-$/) { $preview_mode = 0; } elsif (/^-pvc$/) { $preview_continuous_mode = 1; $force_mode = 0; # So that errors do not cause loops $preview_mode = 0; # to avoid conflicts $printout_mode = 0; } elsif (/^-pvc-$/) { $preview_continuous_mode = 0; } elsif (/^-silent$/ || /^-quiet$/ ){ $silent = 1; } elsif (/^-v$/ || /^-version$/) { print "\n$version_details. Version $version_num\n"; exit; } elsif (/^-verbose$/) { $silent = 0; } elsif (/^-view=default$/) { $view = "default";} elsif (/^-view=dvi$/) { $view = "dvi";} elsif (/^-view=none$/) { $view = "none";} elsif (/^-view=ps$/) { $view = "ps";} elsif (/^-view=pdf$/) { $view = "pdf"; } elsif (/^-e$/) { if ( $#ARGV < 0 ) { &exit_help( "No code to execute specified after -e switch"); } execute_code_string( $ARGV[0] ); shift; } elsif (/^-r$/) { if ( $ARGV[0] eq '' ) { &exit_help( "No RC file specified after -r switch"); } if ( -e $ARGV[0] ) { process_rc_file( $ARGV[0] ); } else { $! = 11; die "$My_name: RC file [$ARGV[0]] does not exist\n"; } shift; } elsif (/^-bm$/) { if ( $ARGV[0] eq '' ) { &exit_help( "No message specified after -bm switch"); } $banner = 1; $banner_message = $ARGV[0]; shift; } elsif (/^-bi$/) { if ( $ARGV[0] eq '' ) { &exit_help( "No intensity specified after -bi switch"); } $banner_intensity = $ARGV[0]; shift; } elsif (/^-bs$/) { if ( $ARGV[0] eq '' ) { &exit_help( "No scale specified after -bs switch"); } $banner_scale = $ARGV[0]; shift; } elsif (/^-dF$/) { if ( $ARGV[0] eq '' ) { &exit_help( "No dvi filter specified after -dF switch"); } $dvi_filter = $ARGV[0]; shift; } elsif (/^-pF$/) { if ( $ARGV[0] eq '' ) { &exit_help( "No ps filter specified after -pF switch"); } $ps_filter = $ARGV[0]; shift; } elsif (/^-/) { warn "$My_name: $_ bad option\n"; $bad_options++; } else { push @command_line_file_list, $_ ; } } if ( $bad_options > 0 ) { &exit_help( "Bad options specified" ); } warn "$My_name: This is $version_details, version: $version_num.\n", "**** Report bugs etc to John Collins . ****\n" unless $silent; # For backward compatibility, convert $texfile_search to @default_files # Since $texfile_search is initialized to "", a nonzero value indicates # that an initialization file has set it. if ( $texfile_search ne "" ) { @default_files = split / /, "*.tex $texfile_search"; } #printA "A: Command line file list:\n"; #for ($i = 0; $i <= $#command_line_file_list; $i++ ) { print "$i: '$command_line_file_list[$i]'\n"; } #Glob the filenames command line if the script was not invoked under a # UNIX-like environment. # Cases: (1) MS/MSwin native Glob # (OS detected as MSWin32) # (2) MS/MSwin cygwin Glob [because we do not know whether # the cmd interpreter is UNIXy (and does glob) or is # native MS-Win (and does not glob).] # (OS detected as cygwin) # (3) UNIX Don't glob (cmd interpreter does it) # (Currently, I assume this is everything else) if ( ($^O eq "MSWin32") || ($^O eq "cygwin") ) { # Preserve ordering of files @file_list = glob_list1(@command_line_file_list); #print "A1:File list:\n"; #for ($i = 0; $i <= $#file_list; $i++ ) { print "$i: '$file_list[$i]'\n"; } } else { @file_list = @command_line_file_list; #print "A2:File list:\n"; #for ($i = 0; $i <= $#file_list; $i++ ) { print "$i: '$file_list[$i]'\n"; } } @file_list = uniq1( @file_list ); # Check we haven't selected mutually exclusive modes. # Note that -c overides all other options, but doesn't cause # an error if they are selected. if (($printout_mode && ( $preview_mode || $preview_continuous_mode )) || ( $preview_mode && $preview_continuous_mode )) { # Each of the options -p, -pv, -pvc turns the other off. # So the only reason to arrive here is an incorrect inititalization # file, or a bug. &exit_help( "Conflicting options (print, preview, preview_continuous) selected"); } if ( @command_line_file_list ) { # At least one file specified on command line (before possible globbing). if ( !@file_list ) { &exit_help( "Wildcards in file names didn't match any files"); } } else { # No files specified on command line, try and find some # Evaluate in order specified. The user may have some special # for wanting processing in a particular order, especially # if there are no wild cards. # Preserve ordering of files my @file_list1 = uniq1( glob_list1(@default_files) ); my @excluded_file_list = uniq1( glob_list1(@default_excluded_files) ); # Make hash of excluded files, for easy checking: my %excl = (); foreach my $file (@excluded_file_list) { $excl{$file} = ''; } foreach my $file (@file_list1) { push( @file_list, $file) unless ( exists $excl{$file} ); } if ( !@file_list ) { &exit_help( "No file name specified, and I couldn't find any"); } } $num_files = $#file_list + 1; $num_specified = $#command_line_file_list + 1; #print "Command line file list:\n"; #for ($i = 0; $i <= $#command_line_file_list; $i++ ) { print "$i: '$command_line_file_list[$i]'\n"; } #print "File list:\n"; #for ($i = 0; $i <= $#file_list; $i++ ) { print "$i: '$file_list[$i]'\n"; } # If selected a preview-continuous mode, make sure exactly one filename was specified if ($preview_continuous_mode && ($num_files != 1) ) { if ($num_specified > 1) { &exit_help( "Need to specify exactly one filename for ". "preview-continuous mode\n". " but $num_specified were specified" ); } elsif ($num_specified == 1) { &exit_help( "Need to specify exactly one filename for ". "preview-continuous mode\n". " but wildcarding produced $num_files files" ); } else { &exit_help( "Need to specify exactly one filename for ". "preview-continuous mode.\n". " Since none were specified on the command line, I looked for \n". " files in '@default_files'.\n". " But I found $num_files files, not 1." ); } } # If selected jobname, can only apply that to one file: if ( ($jobname ne '') && ($num_files > 1) ) { &exit_help( "Need to specify at most one filename if ". "jobname specified, \n". " but $num_files were found (after defaults and wildcarding)." ); } # Normalize the commands, to have place-holders for source, dest etc: &fix_cmds; # If landscape mode, change dvips processor, and the previewers: if ( $landscape_mode ) { $dvips = $dvips_landscape; $dvi_previewer = $dvi_previewer_landscape; $ps_previewer = $ps_previewer_landscape; } if ( $silent ) { add_option( \$latex, " $latex_silent_switch" ); add_option( \$pdflatex, " $pdflatex_silent_switch" ); add_option( \$bibtex, " $bibtex_silent_switch" ); add_option( \$makeindex, " $makeindex_silent_switch" ); add_option( \$dvips, " $dvips_silent_switch" ); } if ( $jobname ne '' ) { $jobstring = "--jobname=$jobname"; add_option( \$latex, " $jobstring" ); add_option( \$pdflatex, " $jobstring" ); } # Which kind of file do we preview? if ( $view eq "default" ) { # If default viewer requested, use "highest" of dvi, ps and pdf # that was requested by user. # No explicit request means view dvi. $view = "dvi"; if ( $postscript_mode ) { $view = "ps"; } if ( $pdf_mode ) { $view = "pdf"; } } # Make sure we make the kind of file we want to view: if ($view eq 'dvi') { $dvi_mode = 1; } if ($view eq 'ps') { $postscript_mode = 1; } if ( ($view eq 'pdf') && ($pdf_mode == 0) ) { $pdf_mode = 1; } # Make sure that we make something if all requests are turned off if ( ! ( $dvi_mode || $pdf_mode || $postscript_mode || $printout_mode) ) { print "No specific requests made, so default to dvi by latex\n"; $dvi_mode = 1; } # Set new-style requested rules: if ( $dvi_mode ) { $requested_filerules{'latex'} = 1; } if ( $pdf_mode == 1 ) { $requested_filerules{'pdflatex'} = 1; } elsif ( $pdf_mode == 2 ) { $requested_filerules{'latex'} = 1; $requested_filerules{'dvips'} = 1; $requested_filerules{'ps2pdf'} = 1; } elsif ( $pdf_mode == 3 ) { $requested_filerules{'latex'} = 1; $requested_filerules{'dvipdf'} = 1; } if ( $postscript_mode ) { $requested_filerules{'latex'} = 1; $requested_filerules{'dvips'} = 1; } if ( $printout_mode ) { $one_time{'print'} = 1; } if ( $preview_continuous_mode || $preview_mode ) { $one_time{'view'} = 1; } if ( length($dvi_filter) != 0 ) { $requested_filerules{'dvi_filter'} = 1; } if ( length($ps_filter) != 0 ) { $requested_filerules{'ps_filter'} = 1; } if ( $banner ) { $requested_filerules{'dvips'} = 1; } if ( $pdf_mode == 2 ) { # We generate pdf from ps. Make sure we have the correct kind of ps. add_option( \$dvips, " $dvips_pdf_switch" ); } # Make convenient forms for lookup. # Extensions always have period. # Convert @generated_exts to a hash for ease of look up, with exts # preceeded by a '.' # %generated_exts_all is used in analyzing file changes, to # distinguish changes in user files from changes in generated files. %generated_exts_all = (); foreach (@generated_exts ) { $generated_exts_all{".$_"} = 1; } $quell_uptodate_msgs = $silent; # Whether to quell informational messages when files are uptodate # Will turn off in -pvc mode # Process for each file. # The value of $bibtex_mode set in an initialization file may get # overridden, during file processing, so save it: #?? Unneeded now: $save_bibtex_mode = $bibtex_mode; $failure_count = 0; $last_failed = 0; # Flag whether failed on making last file # This is used for showing suitable error diagnostics FILE: foreach $filename ( @file_list ) { # Global variables for making of current file: $updated = 0; $failure = 0; # Set nonzero to indicate failure at some point of # a make. Use value as exit code if I exit. $failure_msg = ''; # Indicate reason for failure if ( $do_cd ) { ($filename, $path) = fileparse( $filename ); warn "$My_name: Changing directory to '$path'\n"; pushd( $path ); } else { $path = ''; } ## remove extension from filename if was given. if ( &find_basename($filename, $root_filename, $texfile_name) ) { if ( $force_mode ) { warn "$My_name: Could not find file [$texfile_name]\n"; } else { &ifcd_popd; &exit_msg1( "Could not find file [$texfile_name]", 11); } } if ($jobname ne '' ) { $root_filename = $jobname; } # Initialize basic dependency information: # For use under error conditions: @default_includes = ($texfile_name, "$root_filename.aux"); $fdb_file = "$root_filename.$fdb_ext"; if ( $cleanup_mode > 0 ) { # Use parse_logB to get names of generated files. # It returns its results in the following variables: local %dependents = (); # Maps files to status local @bbl_files = (); local %idx_files = (); # Maps idx_file to (ind_file, base) local %generated_log = (); # Lists generated files local $primary_out = ''; # Actual output file (dvi or pdf) local %conversions = (); # (pdf)latex-performed conversions. # Maps output file created and read by (pdf)latex # to source file of conversion. print "$My_name: Examining log file for generated files...\n"; &parse_logB; my @index_bibtex_generated = (); my @aux_files = (); my %other_generated = %generated_log; rdb_read_generatedB( $fdb_file, \@index_bibtex_generated, \@aux_files, \%other_generated ); if ( ($go_mode == 2) && !$silent ) { warn "$My_name: Removing all generated files\n" unless $silent; } foreach (@index_bibtex_generated, @aux_files) { delete( $other_generated{$_} ); } if ($diagnostics) { show_array( "For deletion:\n" ." Generated (from makeindex and bibtex):", @index_bibtex_generated ); show_array( " Aux files:", @aux_files ); show_array( "Other generated files:\n" ." (only deleted if \$cleanup_includes_generated is set): ", keys %other_generated ); } # Add to the generated files, some log file and some backup # files used in previous versions of latexmk &cleanup1( $fdb_ext, 'blg', 'ilg', 'log', 'aux.bak', 'idx.bak', split(' ',$clean_ext), @generated_exts ); unlink( 'texput.log', @index_bibtex_generated, "texput.aux", @aux_files ); if ($cleanup_includes_generated) { unlink( keys %other_generated ); } if ( $cleanup_mode == 1 ) { &cleanup1( 'dvi', 'dviF', 'ps', 'psF', 'pdf', split(' ', $clean_full_ext) ); } } if ($cleanup_fdb) { unlink $fdb_file; } if ($cleanup_only) { next FILE; } # Initialize file and rule databases. %rule_list = (); &rdb_make_rule_list; &rdb_set_rules(\%rule_list); #??? The following are not needed if use makeB. # ?? They may be set too early? # Arrays and hashes for picking out accessible rules. # Distinguish rules for making files and others @accessible_all = sort ( &rdb_accessible( keys %requested_filerules, keys %one_time )); %accessible_filerules = (); foreach (@accessible_all) { unless ( /view/ || /print/ ) { $accessible_filerules{$_} = 1; } } @accessible_filerules = sort keys %accessible_filerules; # show_array ( "=======All rules used", @accessible_all ); # show_array ( "=======Requested file rules", sort keys %requested_filerules ); # show_array ( "=======Rules for files", @accessible_filerules ); if ( $diagnostics ) { print "$My_name: Rules after start up for '$texfile_name'\n"; rdb_show(); } %primaries = (); foreach (@accessible_all) { if ( ($_ eq 'latex') || ($_ eq 'pdflatex') ) { $primaries{$_} = 1; } } $have_fdb = 0; if ( (! -e $fdb_file) && (! -e "$root_filename.aux") ) { # No aux and no fdb file => set up trivial aux file # and corresponding fdb_file. Arrange them to provoke one run # as minimum, but no more if actual aux file is trivial. # (Useful on big files without cross references.) &set_trivial_aux_fdb; } if ( -e $fdb_file ) { $rdb_errors = rdb_read( $fdb_file ); $have_fdb = ($rdb_errors == 0); } if (!$have_fdb) { # We didn't get a valid set of data on files used in # previous run. So use filetime criterion for make # instead of change from previous run, until we have # done our own make. rdb_recurseA( [keys %possible_primaries], sub{ if ( $$Ptest_kind == 1 ) { $$Ptest_kind = 3;} } ); if ( -e "$root_filename.log" ) { rdb_for_some( [keys %possible_primaries], \&rdb_set_from_logB ); } } if ($go_mode) { # Force everything to be remade. rdb_recurseA( [keys %requested_filerules], sub{$$Pout_of_date=1;} ); } if ( $diagnostics ) { print "$My_name: Rules after initialization\n"; rdb_show(); } #************************************************************ if ( $preview_continuous_mode ) { &make_preview_continuousB; # Will probably exit by ctrl/C and never arrive here. next FILE; } ## Handling of failures: ## Variable $failure is set to indicate a failure, with information ## put in $failure_msg. ## These variables should be set to 0 and '' at any point at which it ## should be assumed that no failures have occurred. ## When after a routine is called it is found that $failure is set, then ## processing should normally be aborted, e.g., by return. ## Then there is a cascade of returns back to the outermost level whose ## responsibility is to handle the error. ## Exception: An outer level routine may reset $failure and $failure_msg ## after initial processing, when the error condition may get ## ameliorated later. #Initialize failure flags now. $failure = 0; $failure_msg = ''; $failure = rdb_makeB( keys %requested_filerules ); if ($failure > 0) { last FILE; } rdb_for_some( [keys %one_time], \&rdb_run1 ); } # end FILE continue { if ($dependents_list) { rdb_list(); } # Handle any errors $error_message_count = rdb_show_rule_errors(); if ( ($error_message_count == 0) || ($failure > 0) ) { if ( $failure_msg ) { #Remove trailing space $failure_msg =~ s/\s*$//; warn "$My_name: Did not finish processing file:\n $failure_msg\n"; $failure = 1; } } if ( ($failure > 0) || ($error_message_count > 0) ) { $failure_count ++; $last_failed = 1; } else { $last_failed = 0; } &ifcd_popd; } # If we get here without going through the continue section: if ( $do_cd && ($#dir_stack > -1) ) { # Just in case we did an abnormal exit from the loop warn "$My_name: Potential bug: dir_stack not yet unwound, undoing all directory changes now\n"; &finish_dir_stack; } if ($failure_count > 0) { if ( $last_failed <= 0 ) { # Error occured, but not on last file, so # user may not have seen error messages warn "\n------------\n"; warn "$My_name: Some operations failed.\n"; } if ( !$force_mode ) { warn "$My_name: Use the -f option to force complete processing.\n"; } exit 12; } # end MAIN PROGRAM ############################################################# sub fix_cmds { # If commands do not have placeholders for %S etc, put them in foreach ($latex, $pdflatex, $lpr, $lpr_dvi, $lpr_pdf, $pdf_previewer, $ps_previewer, $ps_previewer_landscape, $dvi_previewer, $dvi_previewer_landscape, $kpsewhich ) { # Source only if ( $_ && ! /%/ ) { $_ .= " %O %S"; } } foreach ($bibtex) { # Base only if ( $_ && ! /%/ ) { $_ .= " %O %B"; } } foreach ($dvipdf, $ps2pdf) { # Source and dest without flag for destination if ( $_ && ! /%/ ) { $_ .= " %O %S %D"; } } foreach ($dvips, $makeindex) { # Source and dest with -o dest before source if ( $_ && ! /%/ ) { $_ .= " %O -o %D %S"; } } foreach ($dvi_filter, $ps_filter) { # Source and dest, but as filters if ( $_ && ! /%/ ) { $_ .= " %O <%S >%D"; } } } #END fix_cmds ############################################################# sub add_option { # Call add_option( \$cmd, $opt ) # Add option to command if ( ${$_[0]} !~ /%/ ) { &fix_cmds; } ${$_[0]} =~ s/%O/$_[1] %O/; } #END add_option ############################################################# sub rdb_make_rule_list { # Substitutions: %S = source, %D = dest, %B = this rule's base # %T = texfile, %R = root = base for latex. # Defaults for dvi, ps, and pdf files # Use local, not my, so these variables can be referenced local $dvi_final = "%R.dvi"; local $ps_final = "%R.ps"; local $pdf_final = "%R.pdf"; if ( length($dvi_filter) > 0) { $dvi_final = "%R.dviF"; } if ( length($ps_filter) > 0) { $ps_final = "%R.psF"; } my $print_file = ''; my $print_cmd = ''; if ( $print_type eq 'dvi' ) { $print_file = $dvi_final; $print_cmd = $lpr_dvi; } elsif ( $print_type eq 'pdf' ) { $print_file = $pdf_final; $print_cmd = $lpr_pdf; } elsif ( $print_type eq 'ps' ) { $print_file = $ps_final; $print_cmd = $lpr; } my $view_file = ''; my $viewer = ''; my $viewer_update_method = 0; my $viewer_update_signal = undef; my $viewer_update_command = undef; if ( ($view eq 'dvi') || ($view eq 'pdf') || ($view eq 'ps') ) { $view_file = ${$view.'_final'}; $viewer = ${$view.'_previewer'}; $viewer_update_method = ${$view.'_update_method'}; $viewer_update_signal = ${$view.'_update_signal'}; if (defined ${$view.'_update_command'}) { $viewer_update_command = ${$view.'_update_command'}; } } # Specification of internal command for viewer update: my $PA_update = ['do_update_view', $viewer_update_method, $viewer_update_signal, 0, 1]; # For test_kind: Use file contents for latex and friends, but file time for the others. # This is because, especially for dvi file, the contents of the file may contain # a pointer to a file to be included, not the contents of the file! %rule_list = ( 'latex' => [ 'primary', "$latex", '', "%T", "%B.dvi", "%R", 1 ], 'pdflatex' => [ 'primary', "$pdflatex", '', "%T", "%B.pdf", "%R", 1 ], 'dvipdf' => [ 'external', "$dvipdf", 'do_viewfile', $dvi_final, "%B.pdf", "%R", 2 ], 'dvips' => [ 'external', "$dvips", 'do_viewfile', $dvi_final, "%B.ps", "%R", 2 ], 'dvifilter'=> [ 'external', $dvi_filter, 'do_viewfile', "%B.dvi", "%B.dviF", "%R", 2 ], 'ps2pdf' => [ 'external', "$ps2pdf", 'do_viewfile', $ps_final, "%B.pdf", "%R", 2 ], 'psfilter' => [ 'external', $ps_filter, 'do_viewfile', "%B.ps", "%B.psF", "%R", 2 ], 'print' => [ 'external', "$print_cmd", 'if_source', $print_file, "", "", 2 ], 'update_view' => [ 'external', $viewer_update_command, $PA_update, $view_file, "", "", 2 ], 'view' => [ 'external', "$viewer", 'if_source', $view_file, "", "", 2 ], ); %source_list = (); foreach my $rule (keys %rule_list) { $source_list{$rule} = []; my $PAsources = $source_list{$rule}; my ( $cmd_type, $cmd, $source, $dest, $root ) = @{$rule_list{$rule}}; if ($source) { push @$PAsources, [ $rule, $source, '' ]; } } # Ensure we only have one way to make pdf file, and that it is appropriate: if ($pdf_mode == 1) { delete $rule_list{'dvipdf'}; delete $rule_list{'ps2pdf'}; } elsif ($pdf_mode == 2) { delete $rule_list{'dvipdf'}; delete $rule_list{'pdflatex'}; } else { delete $rule_list{'pdflatex'}; delete $rule_list{'ps2pdf'}; } } # END rdb_make_rule_list #************************************************************ sub rdb_set_rules { # Call rdb_set_rules( \%rule_list, ...) # Set up rule database from definitions # Map of files to rules that MAKE them: %rule_db = (); foreach my $Prule_list (@_) { foreach my $rule ( keys %$Prule_list) { my ( $cmd_type, $ext_cmd, $int_cmd, $source, $dest, $base, $test_kind ) = @{$$Prule_list{$rule}}; my $needs_making = 0; # Substitute in the filename variables, since we will use # those for determining filenames. But delay expanding $cmd # until run time, in case of changes. foreach ($base, $source, $dest ) { s/%R/$root_filename/; } foreach ($source, $dest ) { s/%B/$base/; s/%T/$texfile_name/; } # print "$rule: $cmd_type, EC='$ext_cmd', IC='$int_cmd', $test_kind,\n", # " S='$source', D='$dest', B='$base' $needs_making\n"; rdb_create_rule( $rule, $cmd_type, $ext_cmd, $int_cmd, $test_kind, $source, $dest, $base, $needs_making ); } } # End arguments of subroutine &rdb_make_links; } # END rdb_set_rules #************************************************************ sub rdb_make_links { # ?? Problem if there are multiple rules for getting a file. Notably pdf. # Which one to choose? # Create $from_rule if there's a suitable rule. # Map files to rules: local %from_rules = (); rdb_for_all( sub{ if($$Pdest){$from_rules{$$Pdest} = $rule;} } ); #?? foreach (sort keys %from_rules) {print "D='$_' F='$from_rules{$_}\n";} rdb_for_all( 0, sub{ if ( exists $from_rules{$file} ) { $$Pfrom_rule = $from_rules{$file}; } #?? print "$rule: $file, $$Pfrom_rule\n"; } ); rdb_for_all( 0, sub{ if ( exists $from_rules{$file} ) { $$Pfrom_rule = $from_rules{$file}; } if ( $$Pfrom_rule && (! rdb_rule_exists( $$Pfrom_rule ) ) ) { $$Pfrom_rule = ''; } #?? print "$rule: $file, $$Pfrom_rule\n"; } ); } # END rdb_make_links #************************************************************ sub set_trivial_aux_fdb { # 1. Write aux file EXACTLY as would be written if the tex file # had no cross references, etc. I.e., a minimal .aux file. # 2. Write a corresponding fdb file # 3. Provoke a run of (pdf)latex (actually of all primaries). local $aux_file = "$root_filename.aux"; open( aux_file, '>', $aux_file ) or die "Cannot write file '$aux_file'\n"; print aux_file "\\relax \n"; close(aux_file); foreach my $rule (keys %primaries ) { rdb_ensure_file( $rule, $texfile_name ); rdb_ensure_file( $rule, $aux_file ); rdb_one_rule( $rule, sub{ $$Pout_of_date = 1; } ); } &rdb_write( $fdb_file ); } #END set_trivial_aux_fdb #************************************************************ #### Particular actions #************************************************************ #************************************************************ sub do_cusdep { # Unconditional application of custom-dependency # except that rule is not applied if the source file source # does not exist, and an error is returned if the dest is not made. # # Assumes rule context for the custom-dependency, and that my first # argument is the name of the subroutine to apply my $func_name = $_[0]; my $return = 0; if ( !-e $$Psource ) { # Source does not exist. Users of this rule will need to turn # it off when custom dependencies are reset if ( !$silent ) { ## ??? Was commented out. 1 Sep. 2008 restored, for cusdep no-file-exists issue warn "$My_name: In trying to apply custom-dependency rule\n", " to make '$$Pdest' from '$$Psource'\n", " the source file has disappeared since the last run\n"; } # Treat as successful } elsif ( !$func_name ) { warn "$My_name: Possible misconfiguration or bug:\n", " In trying to apply custom-dependency rule\n", " to make '$$Pdest' from '$$Psource'\n", " the function name is blank.\n"; } elsif ( ! defined &$func_name ) { warn "$My_name: Misconfiguration or bug,", " in trying to apply custom-dependency rule\n", " to make '$$Pdest' from '$$Psource'\n", " function name '$func_name' does not exists.\n"; } else { my $cusdep_ret = &$func_name( $$Pbase ); if ( defined $cusdep_ret && ($cusdep_ret != 0) ) { $return = $cusdep_ret; if ($return) { warn "Rule '$rule', function '$func_name'\n", " failed with return code = $return\n"; } } elsif ( !-e $$Pdest ) { # Destination non-existent, but routine failed to give an error warn "$My_name: In running custom-dependency rule\n", " to make '$$Pdest' from '$$Psource'\n", " function '$func_name' did not make the destination.\n"; $return = -1; } } return $return; } # END do_cusdep #************************************************************ sub do_viewfile { # Unconditionally make file for viewing, going through temporary file if # Assumes rule context my $return = 0; my ($base, $path, $ext) = fileparseA( $$Pdest ); if ( &view_file_via_temporary ) { my $tmpfile = tempfile1( "${root_filename}_tmp", $ext ); $return = &rdb_ext_cmd1( '', '', $tmpfile ); move( $tmpfile, $$Pdest ); } else { $return = &rdb_ext_cmd; } return $return; } #END do_viewfile #************************************************************ sub do_update_view { # Update viewer # Assumes rule context # Arguments: (method, signal, viewer_process) my $return = 0; # Although the process is passed as an argument, we'll need to update it. # So (FUDGE??) bypass the standard interface for the process. # We might as well do this for all the arguments. my $viewer_update_method = ${$PAint_cmd}[1]; my $viewer_update_signal = ${$PAint_cmd}[2]; my $Pviewer_process = \${$PAint_cmd}[3]; my $Pneed_to_get_viewer_process = \${$PAint_cmd}[4]; if ($viewer_update_method == 2) { if ($$Pneed_to_get_viewer_process) { $$Pviewer_process = &find_process_id( $$Psource ); if ($$Pviewer_process != 0) { $$Pneed_to_get_viewer_process = 0; } } if ($$Pviewer_process == 0) { print "$My_name: need to signal viewer for file '$$Psource', but didn't get \n", " process ID for some reason, e.g., no viewer, bad configuration, bug\n" if $diagnostics ; } elsif ( defined $viewer_update_signal) { print "$My_name: signalling viewer, process ID $$Pviewer_process\n" if $diagnostics ; kill $viewer_update_signal, $$Pviewer_process; } else { warn "$My_name: viewer is supposed to be sent a signal\n", " but no signal is defined. Misconfiguration or bug?\n"; $return = 1; } } elsif ($viewer_update_method == 4) { if (defined $$Pext_cmd) { $return = &rdb_ext_cmd; } else { warn "$My_name: viewer is supposed to be updated by running a command,\n", " but no command is defined. Misconfiguration or bug?\n"; } } return $return; } #END do_update_view #************************************************************ sub if_source { # Unconditionally apply rule if source file exists. # Assumes rule context if ( -e $$Psource ) { return &rdb_ext_cmd; } else { return -1; } } #END if_source #************************************************************ #### Subroutines #************************************************************ #************************************************************ # Finds the basename of the root file # Arguments: # 1 - Filename to breakdown # 2 - Where to place base file # 3 - Where to place tex file # Returns non-zero if tex file does not exist # # The rules for determining this depend on the implementation of TeX. # The variable $extension_treatment determines which rules are used. sub find_basename #?? Need to use kpsewhich, if possible { local($given_name, $base_name, $ext, $path, $tex_name); $given_name = $_[0]; if ( "$extension_treatment" eq "miktex_old" ) { # Miktex v. 1.20d: # 1. If the filename has an extension, then use it. # 2. Else append ".tex". # 3. The basename is obtained from the filename by # removing the path component, and the extension, if it # exists. If a filename has a multiple extension, then # all parts of the extension are removed. # 4. The names of generated files (log, aux) are obtained by # appending .log, .aux, etc to the basename. Note that # these are all in the CURRENT directory, and the drive/path # part of the originally given filename is ignored. # # Thus when the given filename is "\tmp\a.b.c", the tex # filename is the same, and the basename is "a". ($base_name, $path, $ext) = fileparse( $given_name, '\..*' ); if ( "$ext" eq "") { $tex_name = "$given_name.tex"; } else { $tex_name = $given_name; } $_[1] = $base_name; $_[2] = $tex_name; } elsif ( "$extension_treatment" eq "unix" ) { # unix (at least web2c 7.3.1) => # 1. If filename.tex exists, use it, # 2. else if filename exists, use it. # 3. The base filename is obtained by deleting the path # component and, if an extension exists, the last # component of the extension, even if the extension is # null. (A name ending in "." has a null extension.) # 4. The names of generated files (log, aux) are obtained by # appending .log, .aux, etc to the basename. Note that # these are all in the CURRENT directory, and the drive/path # part of the originally given filename is ignored. # # Thus when the given filename is "/tmp/a.b.c", there are two # cases: # a. /tmp/a.b.c.tex exists. Then this is the tex file, # and the basename is "a.b.c". # b. /tmp/a.b.c.tex does not exist. Then the tex file is # "/tmp/a.b.c", and the basename is "a.b". if ( -e "$given_name.tex" ) { $tex_name = "$given_name.tex"; } else { $tex_name = "$given_name"; } ($base_name, $path, $ext) = fileparse( $tex_name, '\.[^\.]*' ); $_[1] = $base_name; $_[2] = $tex_name; } else { die "$My_name: Incorrect configuration gives \$extension_treatment=", "'$extension_treatment'\n"; } if ($diagnostics) { print "Given='$given_name', tex='$tex_name', base='$base_name'\n"; } return ! -e $tex_name; } #END find_basename #************************************************************ sub make_preview_continuousB { # Version for use with makeB local @changed = (); local @disappeared = (); local @no_dest = (); # Non-existent destination files local @rules_never_run = (); local @rules_to_apply = (); local $failure = 0; local $runs = 0; local %rules_applied = (); local $updated = 0; # What to make? my @targets = keys %requested_filerules; $quell_uptodate_msgs = 1; local $view_file = ''; rdb_one_rule( 'view', sub{ $view_file = $$Psource; } ); if ( ($view eq 'dvi') || ($view eq 'pdf') || ($view eq 'ps') ) { warn "Viewing $view\n"; } elsif ( $view eq 'none' ) { warn "Not using a previewer\n"; $view_file = ''; } else { warn "$My_name: BUG: Invalid preview method '$view'\n"; exit 20; } my $viewer_running = 0; # No viewer known to be running yet # Get information from update_view rule local $viewer_update_method = 0; # Pointers so we can update the following: local $Pviewer_process = undef; local $Pneed_to_get_viewer_process = undef; rdb_one_rule( 'update_view', sub{ $viewer_update_method = $$PAint_cmd[1]; $Pviewer_process = \$$PAint_cmd[3]; $Pneed_to_get_viewer_process = \$$PAint_cmd[4]; } ); # Note that we don't get the previewer process number from the program # that starts it; that might only be a script to get things set up and the # actual previewer could be (and sometimes IS) another process. if ( ($view_file ne '') && (-e $view_file) && !$new_viewer_always ) { # Is a viewer already running? # (We'll save starting up another viewer.) $$Pviewer_process = &find_process_id( $view_file ); if ( $$Pviewer_process ) { warn "$My_name: Previewer is already running\n" if !$silent; $viewer_running = 1; $$Pneed_to_get_viewer_process = 0; } } # Loop forever, rebuilding .dvi and .ps as necessary. # Set $first_time to flag first run (to save unnecessary diagnostics) CHANGE: for (my $first_time = 1; 1; $first_time = 0 ) { $updated = 0; $failure = 0; $failure_msg = ''; if ( $MSWin_fudge_break && ($^O eq "MSWin32") ) { # Fudge under MSWin32 ONLY, to stop perl/latexmk from # catching ctrl/C and ctrl/break, and let it only reach # downstream programs. See comments at first definition of # $MSWin_fudge_break. $SIG{BREAK} = $SIG{INT} = 'IGNORE'; } $failure = rdb_makeB( @targets ); ## warn "=========Viewer PID = $$Pviewer_process; updated=$updated\n"; if ( $MSWin_fudge_break && ($^O eq "MSWin32") ) { $SIG{BREAK} = $SIG{INT} = 'DEFAULT'; } if ( $failure > 0 ) { if ( !$failure_msg ) { $failure_msg = 'Failure to make the files correctly'; } # There will be files changed during the run that are irrelevant. # We need to wait for the user to change the files. # So set the GENERATED files as up-to-date rdb_for_some( [keys %current_primaries], \&rdb_update_gen_files ); $failure_msg =~ s/\s*$//; #Remove trailing space warn "$My_name: $failure_msg\n", " ==> You will need to change a source file before I do another run <==\n"; } elsif ( ($view_file ne '') && (-e $view_file) && $updated && $viewer_running ) { # A viewer is running. Explicitly get it to update screen if we have to do it: rdb_one_rule( 'update_view', \&rdb_run1 ); } elsif ( ($view_file ne '') && (-e $view_file) && !$viewer_running ) { # Start the viewer if ( !$silent ) { if ($new_viewer_always) { warn "$My_name: starting previewer for '$view_file'\n", "------------\n"; } else { warn "$My_name: I have not found a previewer that ", "is already running. \n", " So I will start it for '$view_file'\n", "------------\n"; } } local $retcode = 0; rdb_one_rule( 'view', sub { $retcode = &rdb_run1;} ); # PREVIOUS local $retcode = rdb_makeB ( 'view' ); if ( $retcode != 0 ) { if ($force_mode) { warn "$My_name: I could not run previewer\n"; } else { &exit_msg1( "I could not run previewer", $retcode); } } else { $viewer_running = 1; $$Pneed_to_get_viewer_process = 1; } # end analyze result of trying to run viewer } # end start viewer rdb_show_rule_errors(); if ( $first_time || $updated || $failure ) { print "\n=== Watching for updated files. Use ctrl/C to stop ...\n"; } $waiting = 1; if ($diagnostics) { warn "WAITING\n"; } &catch_break; $have_break = 0; WAIT: while (1) { sleep($sleep_time); if ($have_break) { last WAIT; } if ( rdb_have_changes(@targets) ) { if (!$silent) { warn "$My_name: Need to remake files.\n"; &rdb_diagnose_changes( ' ' ); } last WAIT; } # Does this do this job???? local $new_files = 0; rdb_for_some( [keys %current_primaries], sub{ $new_files += &rdb_find_new_filesB } ); if ($new_files > 0) { warn "$My_name: New file(s) found.\n"; last WAIT; } if ($have_break) { last WAIT; } } # end WAIT: &default_break; if ($have_break) { print "$My_name: User typed ctrl/C or ctrl/break. I'll stop.\n"; exit; } $waiting = 0; if ($diagnostics) { warn "NOT WAITING\n"; } } #end infinite_loop CHANGE: } #END sub make_preview_continuousB #************************************************************ sub process_rc_file { # Usage process_rc_file( filename ) # Run rc_file whose name is given in first argument # Exit with code 11 if file could not be read. # (In general this is not QUITE the right error) # Exit with code 13 if there is a syntax error or other problem. # ???Should I leave the exiting to the caller (perhaps as an option)? # But I can always catch it with an eval if necessary. # That confuses ctrl/C and ctrl/break handling. my $rc_file = $_[0]; warn "$My_name: Executing PERL code in file '$rc_file'...\n" if $diagnostics; do( $rc_file ); # The return value from the do is not useful, since it is the value of # the last expression evaluated, which could be anything. # The correct test of errors is on the values of $! and $@. # This is not entirely correct. On gluon2: # rc_file does open of file, and $! has error, apparently innocuous # See ~/proposal/06/latexmkrc-effect my $OK = 1; if ( $! ) { # Get both numeric error and its string, by forcing numeric and # string contexts: my $err_no = $!+0; my $err_string = "$!"; warn "$My_name: Initialization file '$rc_file' could not be read,\n", " or it gave some other problem. Error code \$! = $err_no.\n", " Error string = '$err_string'\n"; $! = 256; $OK = 0; } if ( $@ ) { $! = 256; # Indent the error message to make it easier to locate my $indented = prefix( $@, " " ); $@ = ""; warn "$My_name: Initialization file '$rc_file' gave an error:\n", "$indented"; $OK = 0; } if ( ! $OK ) { die "$My_name: Stopping because of problem with rc file\n"; } } #END process_rc_file #************************************************************ sub execute_code_string { # Usage execute_code_string( string_of_code ) # Run the PERL code contained in first argument # Exit with code 13 if there is a syntax error or other problem. # ???Should I leave the exiting to the caller (perhaps as an option)? # But I can always catch it with an eval if necessary. # That confuses ctrl/C and ctrl/break handling. my $code = $_[0]; warn "$My_name: Executing initialization code specified by -e:\n", " '$code'...\n" if $diagnostics; eval $code; # The return value from the eval is not useful, since it is the value of # the last expression evaluated, which could be anything. # The correct test of errors is on the values of $! and $@. if ( $@ ) { $! = 256; my $message = $@; $@ = ""; $message =~ s/\s*$//; die "$My_name: ", "Stopping because executing following code from command line\n", " $code\n", "gave an error:\n", " $message\n"; } } #END execute_code_string #************************************************************ sub cleanup1 { # Usage: cleanup1( exts_without_period, ... ) foreach (@_) { unlink("$root_filename.$_"); } } #END cleanup1 #************************************************************ #************************************************************ #************************************************************ # Error handling routines, warning routines, help #************************************************************ sub die_trace { # Call: die_trace( message ); &traceback; # argument(s) passed unchanged die "\n"; } #END die_trace #************************************************************ sub traceback { # Call: &traceback # or traceback( message, ) my $msg = shift; if ($msg) { warn "$msg\n"; } warn "Traceback:\n"; my $i=0; # Start with immediate caller while ( my ($pack, $file, $line, $func) = caller($i++) ) { if ($func eq 'die_trace') { next; } warn " $func called from line $line\n"; } } #END traceback #************************************************************ sub exit_msg1 { # exit_msg1( error_message, retcode [, action]) # 1. display error message # 2. if action set, then restore aux file # 3. exit with retcode warn "\n------------\n"; warn "$My_name: $_[0].\n"; warn "-- Use the -f option to force complete processing.\n"; my $retcode = $_[1]; if ($retcode >= 256) { # Retcode is the kind returned by system from an external command # which is 256 * command's_retcode $retcode /= 256; } exit $retcode; } #END exit_msg1 #************************************************************ sub warn_running { # Message about running program: if ( $silent ) { warn "$My_name: @_\n"; } else { warn "------------\n@_\n------------\n"; } } #END warn_running #************************************************************ sub exit_help # Exit giving diagnostic from arguments and how to get help. { warn "\n$My_name: @_\n", "Use\n", " $my_name -help\nto get usage information\n"; exit 10; } #END exit_help #************************************************************ sub print_help { print "$My_name $version_num: Automatic LaTeX document generation routine\n\n", "Usage: $my_name [latexmk_options] [filename ...]\n\n", " Latexmk_options:\n", " -bm - Print message across the page when converting to postscript\n", " -bi - Set contrast or intensity of banner\n", " -bs - Set scale for banner\n", " -commands - list commands used by $my_name for processing files\n", " -c - clean up (remove) all nonessential files, except\n", " dvi, ps and pdf files.\n", " This and the other clean-ups are instead of a regular make.\n", " -C - clean up (remove) all nonessential files\n", " including aux, dep, dvi, postscript and pdf files\n", " and file of database of file information\n", " -CA - clean up (remove) absolutely ALL nonessential files.\n", " Now equivalent to -C option.\n", " -CF - Remove file of database of file information before doing \n", " other actions\n", " -cd - Change to directory of source file when processing it\n", " -cd- - Do NOT change to directory of source file when processing it\n", " -dependents - Show list of dependent files after processing\n", " -dependents- - Do not show list of dependent files after processing\n", " -dF - Filter to apply to dvi file\n", " -dvi - generate dvi\n", " -dvi- - turn off required dvi\n", " -e - Execute specified PERL code\n", " -f - force continued processing past errors\n", " -f- - turn off forced continuing processing past errors\n", " -F - Ignore non-existent files when testing for dependencies\n", " -F- - Turn off -F\n", " -gg - Super go mode: clean out generated files (-CA), and then\n", " process files regardless of file timestamps\n", " -g - process regardless of file timestamps\n", " -g- - Turn off -g\n", " -h - print help\n", " -help - print help\n", " -jobname=STRING - set basename of output file(s) to STRING.\n", " (Like --jobname=STRING on command line for many current\n", " implementations of latex/pdflatex.)\n", " -l - force landscape mode\n", " -l- - turn off -l\n", " -new-viewer - in -pvc mode, always start a new viewer\n", " -new-viewer- - in -pvc mode, start a new viewer only if needed\n", " -nodependents - Do not show list of dependent files after processing\n", " -pdf - generate pdf by pdflatex\n", " -pdfdvi - generate pdf by dvipdf\n", " -pdfps - generate pdf by ps2pdf\n", " -pdf- - turn off pdf\n", " -ps - generate postscript\n", " -ps- - turn off postscript\n", " -pF - Filter to apply to postscript file\n", " -p - print document after generating postscript.\n", " (Can also .dvi or .pdf files -- see documentation)\n", " -print=dvi - when file is to be printed, print the dvi file\n", " -print=ps - when file is to be printed, print the ps file (default)\n", " -print=pdf - when file is to be printed, print the pdf file\n", " -pv - preview document. (Side effect turn off continuous preview)\n", " -pv- - turn off preview mode\n", " -pvc - preview document and continuously update. (This also turns\n", " on force mode, so errors do not cause $my_name to stop.)\n", " (Side effect: turn off ordinary preview mode.)\n", " -pvc- - turn off -pvc\n", " -r - Read custom RC file\n", " -silent - silence progress messages from called programs\n", " -v - display program version\n", " -verbose - display usual progress messages from called programs\n", " -version - display program version\n", " -view=default - viewer is default (dvi, ps, pdf)\n", " -view=dvi - viewer is for dvi\n", " -view=none - no viewer is used\n", " -view=ps - viewer is for ps\n", " -view=pdf - viewer is for pdf\n", " filename = the root filename of LaTeX document\n", "\n", "-p, -pv and -pvc are mutually exclusive\n", "-h, -c and -C overides all other options.\n", "-pv and -pvc require one and only one filename specified\n", "All options can be introduced by '-' or '--'. (E.g., --help or -help.)\n", "Contents of RC file specified by -r overrides options specified\n", " before the -r option on the command line\n"; } #END print_help #************************************************************ sub print_commands { warn "Commands used by $my_name:\n", " To run latex, I use \"$latex\"\n", " To run pdflatex, I use \"$pdflatex\"\n", " To run bibtex, I use \"$bibtex\"\n", " To run makeindex, I use \"$makeindex\"\n", " To make a ps file from a dvi file, I use \"$dvips\"\n", " To make a ps file from a dvi file with landscape format, ", "I use \"$dvips_landscape\"\n", " To make a pdf file from a dvi file, I use \"$dvipdf\"\n", " To make a pdf file from a ps file, I use \"$ps2pdf\"\n", " To view a pdf file, I use \"$pdf_previewer\"\n", " To view a ps file, I use \"$ps_previewer\"\n", " To view a ps file in landscape format, ", "I use \"$ps_previewer_landscape\"\n", " To view a dvi file, I use \"$dvi_previewer\"\n", " To view a dvi file in landscape format, ", "I use \"$dvi_previewer_landscape\"\n", " To print a ps file, I use \"$lpr\"\n", " To print a dvi file, I use \"$lpr_dvi\"\n", " To print a pdf file, I use \"$lpr_pdf\"\n", " To find running processes, I use \"$pscmd\", \n", " and the process number is at position $pid_position\n"; warn "Notes:\n", " Command starting with \"start\" is run detached\n", " Command that is just \"start\" without any other command, is\n", " used under MS-Windows to run the command the operating system\n", " has associated with the relevant file.\n", " Command starting with \"NONE\" is not used at all\n"; } #END print_commands #************************************************************ sub view_file_via_temporary { return $always_view_file_via_temporary || ($pvc_view_file_via_temporary && $preview_continuous_mode); } #END view_file_via_temporary #************************************************************ #### Tex-related utilities sub check_bibtex_log { # Check for bibtex warnings: # Usage: check_bibtex_log( base_of_bibtex_run ) # return 0: OK, 1: bibtex warnings, 2: bibtex errors, # 3: could not open .blg file. my $base = $_[0]; my $log_name = "$base.blg"; my $log_file = new FileHandle; open( $log_file, "<$log_name" ) or return 3; my $have_warning = 0; my $have_error = 0; while (<$log_file>) { if (/Warning--/) { #print "Bibtex warning: $_"; $have_warning = 1; } if (/error message/) { #print "Bibtex error: $_"; $have_error = 1; } } close $log_file; if ($have_error) {return 2;} if ($have_warning) {return 1;} return 0; } #END check_bibtex_log #************************************************** sub clean_file_name{ # Convert filename found in log file to true filename. # Used normally only by parse_logB, below # 1. For names of form # `"string".ext', which arises e.g., from \jobname.bbl: # when the base filename contains spaces, \jobname has quotes. # and from \includegraphics with basename specified. # 2. Or "string.ext" from \includegraphcs with basename and ext specified. my $filename = $_[0]; $filename =~ s/^\"([^\"]*)\"(.*)$/$1$2/; return $filename; } # ------------------------------ sub parse_logB { # Scan log file for: dependent files # reference_changed, bad_reference, bad_citation # Return value: 1 if success, 0 if no log file. # Set global variables: # %dependents: maps definite dependents to code: # 0 = from missing-file line # May have no extension # May be missing path # 1 = from 'File: ... Graphic file (type ...)' line # no path. Should exist, but may need a search, by kpsewhich. # 2 = from regular '(...' coding for input file, # Has NO path, which it would do if LaTeX file # Highly likely to be mis-parsed line # 3 = ditto, but has a path character ('/'). # Should be LaTeX file that exists. # If it doesn't exist, we have probably a mis-parsed line. # There's no need to do a search. # 4 = definitive, which in this subroutine is only done: # for default dependents, # and for files that exist and are source of conversion # reported by epstopdf et al. # 5 = Had a missing file line. Now the file exists. # 6 = File was written during run. (Overrides 5) # 7 = File was created during run to be read in. (Overrides 5 and 6) # (e.g., by epstopdf) # Treat the following specially, since they have special rules # @bbl_files to list of .bbl files. # %idx_files to map from .idx files to .ind files. # %generated_log: keys give set of files written by (pdf)latex (e.g., aux, idx) # as determined by \openout = ... lines in log file. # Also set # $reference_changed, $bad_reference, $bad_citation # Trivial or default values if log file does not exist/cannot be opened # Give a quick way of looking up custom-dependency extensions my %cusdep_from = (); my %cusdep_to = (); foreach ( @cus_dep_list ) { my ($fromext, $toext) = split; $cusdep_from{$fromext} = $cusdep_from{".$fromext"} = $_; $cusdep_to{$toext} = $cusdep_to{".$toext"} = $_; } # print "==== Cusdep from-exts:"; foreach (keys %cusdep_from) {print " '$_'";} print "\n"; # print "==== Cusdep to-exts:"; foreach (keys %cusdep_to) {print " '$_'";} print "\n"; # Returned info: %dependents = (); foreach (@default_includes) { $dependents{$_} = 4; } @bbl_files = (); %idx_files = (); # Maps idx_file to (ind_file, base) %generated_log = (); %conversions = (); # $primary_out is actual output file (dvi or pdf) # It is initialized before the call to this routine, to ensure # a sensible default in case of misparsing $reference_changed = 0; $bad_reference = 0; $bad_citation = 0; my $log_name = "$root_filename.log"; my $log_file = new FileHandle; if ( ! open( $log_file, "<$log_name" ) ) { return 0; } if ($log_file_binary) { binmode $log_file; } # Collect lines of log file my @lines = (); while(<$log_file>) { # Could use chomp here, but that fails if there is a mismatch # between the end-of-line sequence used by latex and that # used by perl. (Notably a problem with MSWin latex and # cygwin perl!) s/[\n\r]*$//; # Handle wrapped lines: # They are lines brutally broken at exactly $log_wrap chars # excluding line-end. The TeX program adds an EXTRA # end-of-line character whenever a line gets to $log_wrap # characters. So we recover the unwrapped line(s) simply # by deleting the end-of-line following a line of exactly # $log_wrap characters. my $len = length($_); while ( ($len == $log_wrap) && !eof($log_file) ) { my $extra = <$log_file>; $extra =~ s/[\n\r]*$//; $len = length($extra); $_ .= $extra; } push @lines, $_; } close $log_file; push @lines, ""; # Blank line to terminate. So multiline blocks # are always terminated by non-block line, rather than eof. my $line = 0; # For parsing multiple line blocks of info my $current_pkg = ""; # non-empty string for package name, if in # middle of parsing multi-line block of form: # Package name .... # (name) ... # ... my $block_type = ""; # Specify information in such a block my $delegated_source = ""; # If it is a file conversion, specify source my $delegated_output = ""; # and output file. (Don't put in # data structure until block is ended.) my @converted_pairs = (); LINE: while( $line <= $#lines ) { $_ = $lines[$line]; $line ++; if ( $line == 1 ){ if ( /^This is / ) { # First line OK next LINE; } else { warn "$My_name: Error on first line of '$log_name'. ". "This is apparently not a TeX log file.\n"; $failure = 1; $failure_msg = "Log file '$log_name' appears to have wrong format."; return 0; } } if ( $block_type ) { # In middle of parsing block if ( /^\($current_pkg\)/ ) { # Block continues if ( ($block_type eq 'conversion') && /^\($current_pkg\)\s+Output file: <([^>]+)>/ ) { $delegated_output = $1; } next LINE; } # Block has ended. if ($block_type eq 'conversion') { push @converted_pairs, [ $delegated_source, $delegated_output ]; } $current_pkg = $block_type = $delegated_source = $delegated_output = ""; # Then process current line } # Check for changed references, bad references and bad citations: if (/Rerun to get/) { warn "$My_name: References changed.\n"; $reference_changed = 1; } if (/LaTeX Warning: (Reference[^\001]*undefined)./) { warn "$My_name: $1 \n"; $bad_reference = 1; } if (/LaTeX Warning: (Citation[^\001]*undefined)./) { warn "$My_name: $1 \n"; $bad_citation = 1; } if ( /^Document Class: / ) { # Class sign-on line next LINE; } if ( /^\(Font\)/ ) { # Font info line next LINE; } if (/^No pages of output\./) { $primary_out = ''; warn "$My_name: Log file says no output from latex\n"; next LINE; } if ( /^Output written on\s+(.*)\s+\(\d+\s+page/ ) { $primary_out = $1; warn "$My_name: Log file says output to '$1'\n" unless $silent; next LINE; } if ( /^Overfull / || /^Underfull / || /^or enter new name\. \(Default extension: .*\)/ || /^\*\*\* \(cannot \\read from terminal in nonstop modes\)/ ) { # Latex error/warning, etc. next LINE; } if ( /^\\openout\d+\s*=\s*\`([^\']+)\'\.$/ ) { $generated_log{$1} = 1; next LINE; } # Test for conversion produced by package: if ( /^Package (\S+) Info: Source file: <([^>]+)>/ ) { # Info. produced by epstopdf (and possibly others) # about file conversion $current_pkg = $1; $delegated_source = $2; $block_type = 'conversion'; next LINE; } # Test for writing of index file. The precise format of the message # depends on which package (makeidx.sty , multind.sty or index.sty) and # which version writes the message. if ( /Writing index file (.*)$/ ) { my $idx_file = ''; if ( /^Writing index file (.*)$/ ) { # From makeidx.sty or multind.sty $idx_file = $1; } elsif ( /^index\.sty> Writing index file (.*)$/ ) { # From old versions of index.sty $idx_file = $1; } elsif ( /^Package \S* Info: Writing index file (.*) on input line/ ) { # From new versions of index.sty $idx_file = $1; } else { warn "$My_name: Message indicates index file was written\n", " ==> but I do not know how to understand it: <==\n", " '$_'\n"; next LINE; } # Typically, there is trailing space, not part of filename: $idx_file =~ s/\s*$//; $idx_file = clean_file_name($idx_file); my ($idx_base, $idx_path, $idx_ext) = fileparseA( $idx_file ); $idx_base = $idx_path.$idx_base; $idx_file = $idx_base.$idx_ext; if ( $idx_ext eq '.idx' ) { warn "$My_name: Index file '$idx_file' was written\n" unless $silent; $idx_files{$idx_file} = [ "$idx_base.ind", $idx_base ]; } elsif ( exists $cusdep_from{$idx_ext} ) { if ( !$silent ) { warn "$My_name: Index file '$idx_file' was written\n"; warn " Cusdep '$cusdep_from{$idx_ext}' should be used\n"; } # No action needed here } else { warn "$My_name: Index file '$idx_file' written\n", " ==> but it has an extension I do not know how to handle <==\n"; } next LINE; } if ( /^No file (.*?\.bbl)./ ) { # Notice that the my $bbl_file = clean_file_name($1); warn "$My_name: Non-existent bbl file '$bbl_file'\n $_\n"; $dependents{$bbl_file} = 0; push @bbl_files, $bbl_file; next LINE; } foreach my $pattern (@file_not_found) { if ( /$pattern/ ) { my $file = clean_file_name($1); warn "$My_name: Missing input file: '$file' from line\n '$_'\n" unless $silent; $dependents{$file} = 0; next LINE; } } if ( /^File: ([^\s\[]*) Graphic file \(type / ) { # First line of message from includegraphics/x $dependents{$1} = 1; next LINE; } # Now test for generic lines to ignore, only after special cases! if ( /^File: / ) { # Package sign-on line. Includegraphics/x also produces a line # with this signature, but I've already handled it. next LINE; } if ( /^Package: / ) { # Package sign-on line next LINE; } if (/^\! LaTeX Error: / ) { next LINE; } INCLUDE_CANDIDATE: while ( /\((.*$)/ ) { # Filename found by # '(', then filename, then terminator. # Terminators: obvious candidates: ')': end of reading file # '(': beginning of next file # ' ': space is an obvious separator # ' [': start of page: latex # and pdflatex put a # space before the '[' # '[': start of config file # in pdflatex, after # basefilename. # '{': some kind of grouping # Problem: # All or almost all special characters are allowed in # filenames under some OS, notably UNIX. Luckily most cases # are rare, if only because the special characters need # escaping. BUT 2 important cases are characters that are # natural punctuation # Under MSWin, spaces are common (e.g., "C:\Program Files") # Under VAX/VMS, '[' delimits directory names. This is # tricky to handle. But I think few users use this OS # anymore. # # Solution: use ' [', but not '[' as first try at delimiter. # Then if candidate filename is of form 'name1[name2]', then # try splitting it. If 'name1' and/or 'name2' exists, put # it/them in list, else just put 'name1[name2]' in list. # So form of filename is now: # '(', # then any number of characters that are NOT ')', '(', or '{' # (these form the filename); # then ' [', or ' (', or ')', or end-of-string. # That fails for pdflatex # In log file: # '(' => start of reading of file, followed by filename # ')' => end of reading of file # '[' => start of page (normally preceeded by space) # Remember: # filename (on VAX/VMS) may include '[' and ']' (directory # separators) # filenames (on MS-Win) commonly include space. # First step: replace $_ by whole of line after the '(' # Thus $_ is putative filename followed by other stuff. $_ = $1; if ( /^\"([^\(^\)^\"]+)\"/ ) { # Quoted file name, as from MikTeX } elsif ( /^([^\(^\)]*?)\s\[/ ) { # Terminator: space then '[' # Use *? in condition: to pick up first ' [' as terminator # 'file [' should give good filename. } elsif ( /^([^\(^\)]*)\s(?=\()/ ) { # Terminator is ' (', but '(' isn't in matched string, # so we keep the '(' ready for the next match } elsif ( /^([^\(^\)]*)(\))/ ) { # Terminator is ')' } elsif ( /^([^\(^\)]*?)\s*\{/ ) { # Terminator: arbitrary space then '{' # Use *? in condition: to pick up first ' [' as terminator # 'file [' should give good filename. } else { #Terminator is end-of-string } $_ = $'; # Put $_ equal to the unmatched tail of string ' my $include_candidate = $1; $include_candidate =~ s/\s*$//; # Remove trailing space. if ( $include_candidate eq "[]" ) { # Part of overfull hbox message next INCLUDE_CANDIDATE; } if ( $include_candidate =~ /^\\/ ) { # Part of font message next INCLUDE_CANDIDATE; } # Remove quotes around filename, as for MikTeX. I've already # treated this as a special case. For safety check here: $include_candidate =~ s/^\"(.*)\"$/$1/; # Make list of new include files; sometimes more than one. my @new_includes = ($include_candidate); if ( $include_candidate =~ /^(.+)\[([^\]]+)\]$/ ) { # Construct of form 'file1[file2]', as produced by pdflatex if ( -e $1 ) { # If the first component exists, we probably have the # pdflatex form @new_includes = ($1, $2); } else { # We have something else. # So leave the original candidate in the list } } INCLUDE_NAME: foreach my $include_name (@new_includes) { my ($base, $path, $ext) = fileparseB( $include_name ); if ( ($path eq './') || ($path eq '.\\') ) { $include_name = $base.$ext; } if ( $include_name !~ m'[/|\\]' ) { # Filename does not include a path character # High potential for misparsed line $dependents{$include_name} = 2; } else { $dependents{$include_name} = 3; } if ( $ext eq '.bbl' ) { warn "$My_name: Found input bbl file '$include_name'\n" unless $silent; push @bbl_files, $include_name; } } # INCLUDE_NAME } # INCLUDE_CANDIDATE } # LINE # Default includes are always definitive: foreach (@default_includes) { $dependents{$_} = 4; } ###print "New parse: \n"; ###foreach (sort keys %dependents) { print " '$_': $dependents{$_}\n"; } my @misparsed = (); my @missing = (); my @not_found = (); CANDIDATE: foreach my $candidate (keys %dependents) { my $code = $dependents{$candidate}; if ( -e $candidate ) { if ( exists $generated_log{$candidate} ){ $dependents{$candidate} = 6; } elsif ($code == 0) { $dependents{$candidate} = 5; } else { $dependents{$candidate} = 4; } } elsif ($code == 1) { # Graphics file that is supposed to have been read. # Candidate name is as given in source file, not as path # to actual file. # We have already tested that file doesn't exist, as given. # so use kpsewhich. # If the file still is not found, assume non-existent; my @kpse_result = kpsewhich( $candidate ); if ($#kpse_result > -1) { $dependents{$kpse_result[0]} = 4; delete $dependents{$candidate}; next CANDIDATE; } else { push @not_found, $candidate; } } elsif ($code == 2) { # Candidate is from '(...' construct in log file, for input file # which should include pathname if valid input file. # Name does not have pathname-characteristic character (hence # $code==2. # We get here if candidate file does not exist with given name # Almost surely result of a misparsed line in log file. delete $dependents{$candidate}; push @misparse, $candidate; } elsif ($code == 3) { # Candidate is from '(...' construct in log file, for input file # which should include pathname if valid input file. # Name does have pathname-characteristic character (hence # $code==3. # But we get here only if candidate file does not exist with # given name. # Almost surely result of a misparsed line in log file. # But with lower probability than $code == 2 delete $dependents{$candidate}; push @misparse, $candidate; } elsif ($code == 0) { my ($base, $path, $ext) = fileparseA($candidate); $ext =~ s/^\.//; if ( ($ext eq '') && (-e "$path$base.tex") ) { # I don't think the old version was correct. # If the missing-file report was of a bare # extensionless file, and a corresponding .tex file # exists, then the missing file does not correspond # to the missing file, unless the .tex file was # created during the run. # OLD $dependents{"$path$base.tex"} = 4; # OLD delete $dependents{$candidate}; # NEW: $dependents{"$path$base.tex"} = 4; } push @missing, $candidate; } } CANDIDATE_PAIR: foreach $_ (@converted_pairs) { my ($delegated_source, $delegated_output) = @$_; my $rule = "Delegated $delegated_source, $delegated_output"; # N.B. $delegated_source eq '' means the output file # was created without a named input file. if ( ( (-e $delegated_source) || ($delegated_source eq '') ) && (-e $delegated_output) ) { $conversions{$delegated_output} = $delegated_source; $dependents{$delegated_output} = 7; if ($delegated_source) { $dependents{$delegated_source} = 4; } } else { print "Logfile claimed conversion from '$delegated_source' ", "to '$delegated_output'. But:\n"; if (! -e $delegated_output) { print " Output file does not exist\n"; } if ( ($delegated_source ne '') && (! -e $delegated_output) ) { print " Input file does not exist\n"; } } } if ( $diagnostics ) { @misparse = uniqs( @misparse ); @missing = uniqs( @missing ); @not_found = uniqs( @not_found ); my @dependents = sort( keys %dependents ); my $dependents = $#dependents + 1; my $misparse = $#misparse + 1; my $missing = $#missing + 1; my $not_found = $#not_found + 1; my $exist = $dependents - $not_found - $missing; my $bbl = $#bbl_files + 1; print "$dependents dependent files detected, of which ", "$exist exist, $not_found were not found,\n", " and $missing appear not to exist.\n"; print "Dependents:\n"; foreach (@dependents) { print " '$_' "; if ( $dependents{$_} == 6 ) { print " written by (pdf)latex";} print "\n"; if ( $dependents{$_} == 7 ) { print " converted by (pdf)latex";} print "\n"; } if ($not_found > 0) { print "Not found:\n"; foreach (@not_found) { print " $_\n"; } } if ($missing > 0) { print "Not existent:\n"; foreach (@missing) { print " $_\n"; } } if ( $bbl > 0 ) { print "Input bbl files:\n"; foreach (@bbl_files) { print " $_\n"; } } if ( $misparse > 0 ) { print "$misparse\n"; print "Apparent input files apparently from misunderstood lines in .log file:\n"; foreach ( @misparse ) { print " $_\n"; } } } return 1; } #END parse_logB #************************************************************ sub parse_aux { #Usage: parse_aux( $aux_file, \@new_bib_files, \@new_aux_files ) # Parse aux_file (recursively) for bib files. # If can't open aux file, then # Return 0 and leave @new_bib_files empty # Else set @new_bib_files from information in the aux files # And: # Return 1 if no problems # Return 2 with @new_bib_files empty if there are no \bibdata # lines. # Return 3 if I couldn't locate all the bib_files # Set @new_aux_files to aux files parsed my $aux_file = $_[0]; local $Pbib_files = $_[1]; local $Paux_files = $_[2]; @$Pbib_files = (); @$Paux_files = (); parse_aux1( $aux_file ); if ($#{$Paux_files} < 0) { return 0; } @$Pbib_files = uniqs( @$Pbib_files ); if ( $#{$Pbib_files} == -1 ) { warn "$My_name: No .bib files listed in .aux file '$aux_file' \n", return 2; } my $bibret = &find_file_list1( $Pbib_files, $Pbib_files, '.bib', \@BIBINPUTS ); @$Pbib_files = uniqs( @$Pbib_files ); if ($bibret == 0) { warn "$My_name: Found bibliography file(s) [@$Pbib_files]\n" unless $silent; } else { warn "$My_name: Failed to find one or more bibliography files ", "in [@$Pbib_files]\n"; if ($force_mode) { warn "==== Force_mode is on, so I will continue. ", "But there may be problems ===\n"; } else { #$failure = -1; #$failure_msg = 'Failed to find one or more bib files'; #warn "$My_name: Failed to find one or more bib files\n"; } return 3; } return 1; } #END parse_aux #************************************************************ sub parse_aux1 # Parse single aux file for bib files. # Usage: &parse_aux1( aux_file_name ) # Append newly found bib_filenames in @$Pbib_files, already # initialized/in use. # Append aux_file_name to @$Paux_files if aux file opened # Recursively check \@input aux files # Return 1 if success in opening $aux_file_name and parsing it # Return 0 if fail to open it { my $aux_file = $_[0]; my $aux_fh = new FileHandle; if (! open($aux_fh, $aux_file) ) { warn "$My_name: Couldn't find aux file '$aux_file'\n"; return 0; } push @$Paux_files, $aux_file; AUX_LINE: while (<$aux_fh>) { if ( /^\\bibdata\{(.*)\}/ ) { # \\bibdata{comma_separated_list_of_bib_file_names} # (Without the '.bib' extension) push( @$Pbib_files, split /,/, $1 ); } elsif ( /^\\\@input\{(.*)\}/ ) { # \\@input{next_aux_file_name} &parse_aux1( $1 ); } } close($aux_fh); return 1; } #END parse_aux1 #************************************************************ #************************************************************ #************************************************************ #************************************************************ # Manipulations of main file database: #************************************************************ sub fdb_get { # Call: fdb_get(filename) # Returns an array (time, size, md5) for the current state of the # named file. # For non-existent file, deletes entry in fdb_current, and returns (0,-1,0) my $file = shift; my ($new_time, $new_size) = get_time_size($file); my @nofile = (0,-1,0); # What we use for initializing # a new entry in fdb or flagging # non-existent file if ( $new_size < 0 ) { delete $fdb_current{$file}; return @nofile; } my $recalculate_md5 = 0; if ( ! exists $fdb_current{$file} ) { # Ensure we have a record. $fdb_current{$file} = [@nofile]; $recalculate_md5 = 1; } my $file_data = $fdb_current{$file}; my ( $time, $size, $md5 ) = @$file_data; if ( ($new_time != $time) || ($new_size != $size) ) { # Only force recalculation of md5 if time or size changed # Else we assume file is really unchanged. $recalculate_md5 = 1; } if ($recalculate_md5) { @$file_data = ( $new_time, $new_size, get_checksum_md5( $file ) ); } return @$file_data;; } #END fdb_get #************************************************************ sub fdb_show { # Displays contents of fdb foreach my $file ( sort keys %fdb_current ) { print "'$file': @{$fdb_current{$file}}\n"; } } #END fdb_show #************************************************************ #************************************************************ #************************************************************ # Routines for manipulating rule database #************************************************************ sub rdb_read { # Call: rdb_read( $in_name ) # Sets rule database from saved file, in format written by rdb_write. # Returns -1 if file could not be read else number of errors. # Thus return value on success is 0 my $in_name = $_[0]; my $in_handle = new FileHandle; $in_handle->open( $in_name, '<' ) or return (); my $errors = 0; my $state = 0; # Outside a section my $rule = ''; my $run_time = 0; my $source = ''; my $dest = ''; my $base = ''; local %new_sources = (); # Hash: rule => { file=>[ time, size, md5, fromrule ] } my $new_source = undef; # Reference to hash of sources for current rule LINE: while ( <$in_handle> ) { # Remove leading and trailing white space. s/^\s*//; s/\s*$//; # Ignore blank lines and comments if ( /^$/ || /^#/ || /^%/ ) { next LINE;} if ( /^\[\"([^\"]+)\"\]/ ) { # Start of section $rule = $1; #?? print "--- Starting rule '$rule'\n"; my $tail = $'; #' Single quote in comment tricks the parser in # emacs from misparsing an isolated single quote $run_time = 0; $source = $dest = $base = ''; if ( $tail =~ /^\s*(\S+)\s*$/ ) { $run_time = $1; } elsif ( $tail =~ /^\s*(\S+)\s+\"([^\"]*)\"\s+\"([^\"]*)\"\s+\"([^\"]*)\"\s*$/ ) { $run_time = $1; $source = $2; $dest = $3; $base = $4; } if ( rdb_rule_exists( $rule ) ) { rdb_one_rule( $rule, sub{ $$Ptest_kind = 1; $$Prun_time = $run_time; #??if ($source) { $$Psource = $source; } #??if ($dest) { $$Pdest = $dest; } #??if ($base) { $$Pbase = $base; } } ); } elsif ($rule =~ /^cusdep\s+(\S+)\s+(\S+)\s+(.+)$/ ) { # Create custom dependency my $fromext = $1; my $toext = $2; my $base = $3; $source = "$base.$fromext"; $dest = "$base.$toext"; my $PAnew_cmd = ['do_cusdep', '']; foreach my $dep ( @cus_dep_list ) { my ($tryfromext,$trytoext,$must,$func_name) = split(' ',$dep); if ( ($tryfromext eq $fromext) && ($trytoext eq $toext) ) { $$PAnew_cmd[1] = $func_name; } } rdb_create_rule( $rule, 'cusdep', '', $PAnew_cmd, 1, $source, $dest, $base, 0, $run_time ); } elsif ( $rule =~ /^(makeindex|bibtex)\s*(.*)$/ ) { my $rule_generic = $1; if ( ! $source ) { # If fdb_file was old-style (v. 1) $source = $2; my $path = ''; my $ext = ''; ($base, $path, $ext) = fileparseA( $source ); $base = $path.$base; if ($rule_generic eq 'makeindex') { $dest = "$base.ind"; } elsif ($rule_generic eq 'bibtex') { $dest = "$base.bbl"; $source = "$base.aux"; } } warn "$My_name: File-database '$in_name': setting rule '$rule'\n" if $diagnostics; my $cmd_type = 'external'; my $ext_cmd = ${$rule_generic}; warn " Rule kind = '$rule_generic'; ext_cmd = '$ext_cmd';\n", " source = '$source'; dest = '$dest'; base = '$base';\n" if $diagnostics; rdb_create_rule( $rule, $cmd_type, $ext_cmd, '', 1, $source, $dest, $base, 0, $run_time); } else { warn "$My_name: In file-database '$in_name' rule '$rule'\n", " is not in use in this session\n" if $diagnostics; $new_source = undef; $state = 3; next LINE; } $new_source = $new_sources{$rule} = {}; $state = 1; #Reading a section } elsif ( /^\"([^\"]*)\"\s+(\S+)\s+(\S+)\s+(\S+)\s+\"([^\"]*)\"/ ) { # Source file line if ($state == 3) { # The rule is not being currently used. next LINE; } my $file = $1; my $time = $2; my $size = $3; my $md5 = $4; my $from_rule = $5; #?? print " --- File '$file'\n"; if ($state != 1) { warn "$My_name: In file-database '$in_name' ", "line $. is outside a section:\n '$_'\n"; $errors++; next LINE; } rdb_ensure_file( $rule, $file ); rdb_set_file1( $rule, $file, $time, $size, $md5 ); # Save the rest of the data, especially the from_fule until we know all # the rules, otherwise the from_rule may not exist. # Also we'll have a better chance of looping through files. ${$new_source}{$file} = [ $time, $size, $md5, $from_rule ]; } elsif ($state == 0) { # Outside a section. Nothing to do. } else { warn "$My_name: In file-database '$in_name' ", "line $. is of wrong format:\n '$_'\n"; $errors++; next LINE; } } undef $in_handle; # Set cus dependencies. &rdb_set_dependentsA( keys %rule_db ); #?? Check from_rules exist. return $errors; } # END rdb_read #************************************************************ sub rdb_read_generatedB { # Call: rdb_read_generatedB( $in_name, \@generated1, \@aux_files. # \%other_generated ) # From rule database in saved file, in format written by rdb_write, # finds the non-trivial generated files that are to be deleted by a cleanup. # On entry: # Keys of %other_generated: any detected generated files, from \openout # lines log file, usually. # At exit: # Array @generated1: files associated with makeindex and bibtex # Array @aux_files: aux files # Added to keys of %other_generated: any files that are destinations of rules # whose source is in %other_generated. (One stage only.) my ($in_name, $Pgenerated1, $Paux_files, $Pother_generated) = @_; @$Pgenerated1 = (); @$Paux_files = (); my $in_handle = new FileHandle; $in_handle->open( $in_name, '<' ) or return (); my $rule = ''; my $run_time = 0; my $source = ''; my $dest = ''; my $base = ''; my $ext = ''; my $path = ''; my $state = 0; # Outside a section my @other_additions = (); LINE: while ( <$in_handle> ) { # Remove leading and trailing white space. s/^\s*//; s/\s*$//; # Ignore blank lines and comments if ( /^$/ || /^#/ || /^%/ ) { next LINE;} if ( /^\[\"([^\"]+)\"\]/ ) { # Start of section $rule = $1; my $tail = $'; #' Single quote in comment tricks the parser in # emacs from misparsing an isolated single quote $run_time = 0; $source = $dest = $base = ''; if ( $tail =~ /^\s*(\S+)\s+\"([^\"]*)\"\s+\"([^\"]*)\"\s+\"([^\"]*)\"\s*$/ ) { $source = $2; $dest = $3; $base = $4; } else { next LINE; } if ( $rule =~ /^makeindex/ ) { push @$Pgenerated1, $source, $dest, "$base.ilg"; } elsif ( $rule =~ /^bibtex/ ) { push @$Pgenerated1, $dest, "$base.blg"; push @$Paux_files, $source; } elsif ( exists ${$Pother_generated}{$source} ) { push @other_additions, $dest; } $state = 1; #Reading a section } elsif ( /^\"([^\"]*)\"\s+(\S+)\s+(\S+)\s+(\S+)\s+\"([^\"]*)\"/ ) { # Source file line if ($state == 3) { # The rule is not being currently used. next LINE; } my $file = $1; ($base, $path, $ext) = fileparseA( $file ); if ( $ext eq '.aux' ) { push @$Paux_files, $file; } } elsif ($state == 0) { # Outside a section. Nothing to do. } else { warn "$My_name: In file-database '$in_name' ", "line $. is of wrong format:\n '$_'\n"; next LINE; } } # LINE undef $in_handle; foreach (@other_additions) { ${$Pother_generated}{$_} = 1; } } # END rdb_read_generatedB #************************************************************ sub rdb_write { # Call: rdb_write( $out_name ) # Writes to the given file name the database of file and rule data # accessible from the primary rules. # Returns 1 on success, 0 if file couldn't be opened. local $out_name = $_[0]; local $out_handle = new FileHandle; if ( ($out_name eq "") || ($out_name eq "-") ) { # Open STDOUT $out_handle->open( '>-' ); } else { $out_handle->open( $out_name, '>' ); } if (!$out_handle) { return 0; } local %current_primaries = (); # Hash whose keys are primary rules # needed, i.e., known latex-like rules which trigger # circular dependencies local @pre_primary = (); # Array of rules local @post_primary = (); # Array of rules local @one_time = (); # Array of rules &rdb_classify_rules( \%possible_primaries, keys %requested_filerules ); print $out_handle "# Fdb version $fdb_ver\n"; my @rules = rdb_accessible( uniq1( keys %possible_primaries ) ) ; # Separate call to sort. Otherwise rdb_accessible seems to get wrong argument. @rules = sort( @rules ); rdb_for_some( \@rules, sub { # Omit data on a unused and never-run primary rule: if ( ($$Prun_time == 0) && exists( $possible_primaries{$rule} ) && ! exists( $current_primaries{$rule} ) ) { return; } print $out_handle "[\"$rule\"] $$Prun_time \"$$Psource\" \"$$Pdest\" \"$$Pbase\" \n"; rdb_do_files( sub { print $out_handle " \"$file\" $$Ptime $$Psize $$Pmd5 \"$$Pfrom_rule\"\n"; } ); } ); undef $out_handle; return 1; } #END rdb_write #************************************************************ sub rdb_set_from_logB { # Assume rule context. # This is intended to be applied only for a primary (LaTeX-like) rule # Starting from the log_file, set current details for the current rule. # Rules should only be primary if ( $$Pcmd_type ne 'primary' ) { warn "\n$My_name: ==========$My_name: Probable BUG======= \n ", " rdb_set_from_logB called to set files ", "for non-primary rule '$rule'\n\n"; return; } #?? # We'll prune this by all files determined to be needed for source files. #?? my %unneeded_source = %$PHsource; # Parse log file to find relevant filenames # Result in the following variables: local %dependents = (); # Maps files to status local @bbl_files = (); local %idx_files = (); # Maps idx_file to (ind_file, base) local %generated_log = (); # Lists generated files found in log file local $primary_out = $$Pdest; # output file (dvi or pdf) local %conversions = (); # (pdf)latex-performed conversions. # Maps output file created and read by (pdf)latex # to source file of conversion. # The following are also returned, but are global, to be used by caller # $reference_changed, $bad_reference $bad_citation &parse_logB; # Handle result on output file: # 1. Non-existent output file, which is because of no content. # This could either be because the source file has genuinely # no content, or because of a missing input file. Since a # missing input file might be correctable by a run of some # other program whose running is provoked AFTER a run of # (pdf)latex, we'll set a diagnostic and leave it to the # rdb_makeB to handle after all circular dependencies are # resolved. # 2. The output file might be of a different kind than expected # (i.e., dvi instead of pdf, or vv). This could # legitimately occur when the source file (or an invoked # package or class) sets \pdfoutput. $missing_dvi_pdf = ''; if ($primary_out eq '') { warn "$My_name: For rule '$rule', no output was made\n"; $missing_dvi_pdf = $$Pdest; } elsif ($primary_out ne $$Pdest) { warn "$My_name: ===For rule '$rule', actual output '$primary_out'\n", " ======appears not to match expected output '$$Pdest'\n"; } IDX_FILE: foreach my $idx_file ( keys %idx_files ) { my ($ind_file, $ind_base) = @{$idx_files{$idx_file}}; my $from_rule = "makeindex $idx_file"; if ( ! rdb_rule_exists( $from_rule ) ){ print "!!!===Creating rule '$from_rule': '$ind_file' from '$idx_file'\n" if ($diagnostics); rdb_create_rule( $from_rule, 'external', $makeindex, '', 1, $idx_file, $ind_file, $ind_base, 1, 0); print " ===Source file '$ind_file' for '$rule'\n" if ($diagnostics > -1); rdb_ensure_file( $rule, $ind_file, $from_rule ); } if ( ! -e $ind_file ) { # Failure was non-existence of makable file # Leave failure issue to other rules. $failure = 0; } } BBL_FILE: foreach my $bbl_file ( uniqs( @bbl_files ) ) { my ($bbl_base, $bbl_path, $bbl_ext) = fileparseA( $bbl_file ); $bbl_base = $bbl_path.$bbl_base; my @new_bib_files; my @new_aux_files; &parse_aux( "$bbl_base.aux", \@new_bib_files, \@new_aux_files ); my $from_rule = "bibtex $bbl_base"; if ( ! rdb_rule_exists( $from_rule ) ){ print "!!!===Creating rule '$from_rule'\n" if ($diagnostics); rdb_create_rule( $from_rule, 'external', $bibtex, '', 1, "$bbl_base.aux", $bbl_file, $bbl_base, 1, 0); foreach my $source ( @new_bib_files, @new_aux_files ) { print " ===Source file '$source'\n" if ($diagnostics); rdb_ensure_file( $from_rule, $source ); } print " ===Source file '$bbl_file' for '$rule'\n" if ($diagnostics); rdb_ensure_file( $rule, $bbl_file, $from_rule ); if ( ! -e $bbl_file ) { # Failure was non-existence of makable file # Leave failure issue to other rules. $failure = 0; } } } NEW_SOURCE: foreach my $new_source (keys %dependents, keys %conversions) { print " ===Source file for rule '$rule': '$new_source'\n" if ($diagnostics); if ( ($dependents{$new_source} == 5) || ($dependents{$new_source} == 6) ) { # (a) File was detected in "No file..." line in log file. # Typically file was searched for early in run of # latex/pdflatex, was not found, and then was written # later in run. # or (b) File was written during run. # In both cases, if file doesn't already exist in database, we # don't know its previous status. Therefore we tell # rdb_ensure_file that if it needs to add the file to its # database, then the previous version of the file should be # treated as non-existent, to ensure another run is forced. rdb_ensure_file( $rule, $new_source, undef, 1 ); } elsif ( $dependents{$new_source} == 7 ) { # File was result of conversion by (pdf)latex. my $cnv_source = $conversions{$new_source}; rdb_ensure_file( $rule, $new_source ); if ($cnv_source) { # Conversion from $cnv_source to $new_source # implies that effectively $cnv_source is a source # of the (pdf)latex run. rdb_ensure_file( $rule, $cnv_source ); } # Flag that changes of the generated file during a run # do not require a rerun: rdb_one_file( $new_source, sub{ $$Pcorrect_after_primary = 1; } ); } else { # But we don't need special precautions for ordinary user files # (or for files that are generated outside of latex/pdflatex). rdb_ensure_file( $rule, $new_source ); } } my @more_sources = &rdb_set_dependentsA( $rule ); my $num_new = $#more_sources + 1; foreach (@more_sources) { $dependents{$_} = 4; if ( ! -e $_ ) { # Failure was non-existence of makable file # Leave failure issue to other rules. $failure = 0; $$Pchanged = 1; # New files can be made. Ignore error. } } if ($diagnostics) { if ($num_new > 0 ) { print "$num_new new source files for rule '$rule':\n"; foreach (@more_sources) { print " '$_'\n"; } } else { print "No new source files for rule '$rule':\n"; } } my @files_not_needed = (); foreach (keys %$PHsource) { if ( ! exists $dependents{$_} ) { print "Removing no-longer-needed dependent '$_' from rule '$rule'\n" if $diagnostics>-1; push @files_not_needed, $_; } } rdb_remove_files( $rule, @files_not_needed ); } # END rdb_set_from_logB #************************************************************ sub rdb_find_new_filesB { # Call: rdb_find_new_filesB # Assumes rule context for primary rule. # Deal with files which were missing and for which a method # of finding them has become available: # (a) A newly available source file for a custom dependency. # (b) When there was no extension, a file with appropriate # extension # (c) When there was no extension, and a newly available source # file for a custom dependency can make it. my %new_includes = (); MISSING_FILE: foreach my $missing ( keys %$PHsource ) { next if ( $$PHsource{$missing} != 0 ); my ($base, $path, $ext) = fileparseA( $missing ); $ext =~ s/^\.//; if ( -e "$missing.tex" ) { $new_includes{"$missing.tex"} = 1; } if ( -e $missing ) { $new_includes{$missing} = 1; } if ( $ext ne "" ) { foreach my $dep (@cus_dep_list){ my ($fromext,$toext) = split(' ',$dep); if ( ( "$ext" eq "$toext" ) && ( -e "$path$base.$fromext" ) ) { # Source file for the missing file exists # So we have a real include file, and it will be made # next time by rdb_set_dependents $new_includes{$missing} = 1; } else { # no point testing the $toext if the file doesn't exist. } next MISSING_FILE; } } else { # $_ doesn't exist, $_.tex doesn't exist, # and $_ doesn't have an extension foreach my $dep (@cus_dep_list){ my ($fromext,$toext) = split(' ',$dep); if ( -e "$path$base.$fromext" ) { # Source file for the missing file exists # So we have a real include file, and it will be made # next time by &rdb__dependents $new_includes{"$path$base.$toext"} = 1; # next MISSING_FILE; } if ( -e "$path$base.$toext" ) { # We've found the extension for the missing file, # and the file exists $new_includes{"$path$base.$toext"} = 1; # next MISSING_FILE; } } } } # end MISSING_FILES # Sometimes bad line-breaks in log file (etc) create the # impression of a missing file e.g., ./file, but with an incorrect # extension. The above tests find the file with an extension, # e.g., ./file.tex, but it is already in the list. So now I will # remove files in the new_include list that are already in the # include list. Also handle aliasing of file.tex and ./file.tex. # For example, I once found: # (./qcdbook.aux (./to-do.aux) (./ideas.aux) (./intro.aux) (./why.aux) (./basics #.aux) (./classics.aux) my $found = 0; foreach my $file (keys %new_includes) { my $stripped = $file; $stripped =~ s{^\./}{}; if ( exists $PHsource{$file} ) { delete $new_includes{$file}; } else { $found ++; rdb_ensure_file( $rule, $file ); } } ## ?? Is this correct? I used to use @includes # rdb_update_files_for_rule( keys %PHsources ); if ( $diagnostics && ( $found > 0 ) ) { warn "$My_name: Detected previously missing files:\n"; foreach ( sort keys %new_includes ) { warn " '$_'\n"; } } return $found; } # END rdb_find_new_filesB #************************************************************ sub rdb_update_files_for_rule { #=========== APPEARS NOT TO BE USED! ========================= # Usage: rdb_update_files_for_rule( source_files ...) # Assume rule context. # Update list of source files for current rule, treating properly cases # where file didn't exist before run, etc foreach my $file ( @_ ) { if ( ! rdb_file_exists( $rule, $file ) ) { # File that didn't appear in the source files for the run # before. Two cases: (a) it was created during the run; # (b) it existed before the run. # If case (a), then the file was non-existent before the # run, so we must now label it as non-existent, and # we trigger a new run #?? print "?? Adding '$file' to '$rule'\n"; rdb_ensure_file( $rule, $file ); my $file_time = get_mtime0( $file ); if ( ($$Ptest_kind == 2) || ($$Ptest_kind == 3) ) { # Test wrt destination time, but exclude files # which appear to be generated (according to extension) # Assume generated files up-to-date after last run. # I.e., last run was valid. my $ext = ext( $file ); if ( (! exists $generated_exts_all{$ext} ) && ($file_time >= $dest_mtime) ) { # Only changes since the mtime of the destination matter, # and only non-generated files count. # Non-existent destination etc gives $dest_mtime=0 # so this will automatically give out-of-date condition # Flag out-of-date for a file by treating it as non-existent rdb_set_file1( $rule, $file, 0, -1, 0); } } elsif ($file_time >= $$Prun_time ) { # File generated during run. So treat as non-existent at beginning rdb_set_file1( $rule, $file, 0, -1, 0); $$Pout_of_date = 1; } # Else default of current state of file is correct. } # END not previously existent file } # END file } # END rdb_update_files_for_rule #************************************************************ sub rdb_set_dependentsA { # Call rdb_set_dependentsA( rules ...) # Returns array (sorted), of new source files. local @new_sources = (); local @deletions = (); # Shouldn't recurse. The definite rules to be examined are given. rdb_for_some( [@_], 0, \&rdb_one_depA ); # OLD rdb_recurseA( [@_], 0, \&rdb_one_depA ); foreach (@deletions) { my ($rule, $file) = @$_; rdb_remove_files( $rule, $file ); } &rdb_make_links; return uniqs( @new_sources ); } #END rdb_set_dependentsA #************************************************************ sub rdb_one_depA { # Helper for finding dependencies. One case, $rule and $file given # Assume file (and rule) context for DESTINATION file. local $new_dest = $file; my ($base_name, $path, $toext) = fileparseA( $new_dest ); $base_name = $path.$base_name; $toext =~ s/^\.//; my $Pinput_extensions = $input_extensions{$rule}; DEP: foreach my $dep ( @cus_dep_list ) { my ($fromext,$proptoext,$must,$func_name) = split(' ',$dep); if ( $toext eq $proptoext ) { my $source = "$base_name.$fromext"; # Found match of rule if ($diagnostics) { print "Found cusdep: $source to make $rule:$new_dest ====\n"; } if ( -e $source ) { $$Pfrom_rule = "cusdep $fromext $toext $base_name"; #?? print "?? Ensuring rule for '$$Pfrom_rule'\n"; local @PAnew_cmd = ( 'do_cusdep', $func_name ); if ( !-e $new_dest ) { push @new_sources, $new_dest; } if (! rdb_rule_exists( $$Pfrom_rule ) ) { print "=== Creating rule for '$$Pfrom_rule'\n"; rdb_create_rule( $$Pfrom_rule, 'cusdep', '', \@PAnew_cmd, 3, $source, $new_dest, $base_name, 0 ); } else { rdb_one_rule( $$Pfrom_rule, sub{ @$PAint_cmd = @PAnew_cmd; $$Pdest = $new_dest;} ); } return; } else { # Source file does not exist if ( !$force_mode && ( $must != 0 ) ) { # But it is required that the source exist ($must !=0) $failure = 1; $failure_msg = "File '$base_name.$fromext' does not exist ". "to build '$base_name.$toext'"; return; } elsif ( $$Pfrom_rule =~ /^cusdep $fromext $toext / ) { # Source file does not exist, destination has the rule set. # So turn the from_rule off $$Pfrom_rule = ''; } else { } } } elsif ( ($toext eq '') && (! -e $file ) && (! -e "$base_name.$proptoext" ) && exists $$Pinput_extensions{$proptoext} ) { # Empty extension and non-existent destination # This normally results from \includegraphics{A} # without graphics extension for file, when file does # not exist. So we will try to find something to make it. my $source = "$base_name.$fromext"; if ( -e $source ) { $new_dest = "$base_name.$proptoext"; my $from_rule = "cusdep $fromext $proptoext $base_name"; push @new_sources, $new_dest; print "Ensuring rule for '$from_rule', to make '$new_dest'\n" if $diagnostics > -1; local @PAnew_cmd = ( 'do_cusdep', $func_name ); if (! rdb_rule_exists( $from_rule ) ) { rdb_create_rule( $from_rule, 'cusdep', '', \@PAnew_cmd, 3, $source, $new_dest, $base_name, 0); } else { rdb_one_rule( $$Pfrom_rule, sub{ @$PAint_cmd = @PAnew_cmd; $$Pdest = $new_dest;} ); } rdb_ensure_file( $rule, $new_dest, $from_rule ); # We've now got a spurious file in our rule. But don't mess # with deleting an item we are in the middle of! push @deletions, [$rule, $file]; return; } } # End of Rule found } # End DEP } #END rdb_one_depA #************************************************************ sub rdb_list { # Call: rdb_list() # List rules and their source files print "===Rules:\n"; local $count_rules = 0; my @accessible_all = rdb_accessible( keys %requested_filerules ); rdb_for_some( \@accessible_all, sub{ $count_rules++; print "Rule '$rule' depends on:\n"; }, sub{ print " '$file'\n"; } ); if ($count_rules <= 0) { print " ---No rules defined\n"; } } #END rdb_list #************************************************************ sub rdb_show { # Call: rdb_show() # Displays contents of rule data base. # Side effect: Exercises access routines! print "===Rules:\n"; local $count_rules = 0; rdb_for_all( sub{ $count_rules++; my @int_cmd = @$PAint_cmd; foreach (@int_cmd) { if ( !defined($_) ) { $_='undef';} } print " [$rule]: '$$Pcmd_type' '$$Pext_cmd' '@int_cmd' $$Ptest_kind ", "'$$Psource' '$$Pdest' '$$Pbase' $$Pout_of_date $$Pout_of_date_user\n"; }, sub{ print " '$file': $$Ptime $$Psize $$Pmd5 '$$Pfrom_rule'\n"; } ); if ($count_rules <= 0) { print " ---No rules defined\n"; } } #END rdb_show #************************************************************ sub rdb_accessible { # Call: rdb_accessible( rule, ...) # Returns array of rules accessible from the given rules local @accessible = (); rdb_recurseA( [@_], sub{ push @accessible, $rule; } ); return @accessible; } #END rdb_accessible #************************************************************ #************************************************************ #************************************************************ sub rdb_makeB { # Call: rdb_makeB( target, ... ) # Makes the targets and prerequisites. # Leaves one-time rules to last. # Does appropriate repeated makes to resolve dependency loops # Returns 0 on success, nonzero on failure. # General method: Find all accessible rules, then repeatedly make # them until all accessible rules are up-to-date and the source # files are unchanged between runs. On termination, all # accessible rules have stable source files. # # One-time rules are view and print rules that should not be # repeated in an algorithm that repeats rules until the source # files are stable. It is the calling routine's responsibility to # arrange to call them, or to use them here with caution. # # Note that an update-viewer rule need not be considered # one-time. It can be legitimately applied everytime the viewed # file changes. # # Note also that the criterion of stability is to be applied to # source files, not to output files. Repeated application of a # rule to IDENTICALLY CONSTANT source files may produce different # output files. This may be for a trivial reason (e.g., the # output file contains a time stamp, as in the header comments for # a typical postscript file), or for a non-trivial reason (e.g., a # stochastic algorithm, as in abcm2ps). # # This caused me some actual trouble. In general, circular # dependencies produce non-termination, and the the following # situation is an example of a generic situation where certain # rules must be obeyed in order to obtain proper results: # 1. A/the latex source file contains specifications for # certain postprocessing operations. Standard (pdf)latex # already has this, for indexing and bibliography. # 2. In the case in point that caused me trouble, the # specification was for musical tunes that were contained # in external source files not directly input to # (pdf)latex. But in the original version, there was a # style file (abc.sty) that caused latex itself to call # abcm2ps to make .eps files for each tune that were to be # read in on the next run of latex. # 3. Thus the specification can cause a non-terminating loop # for latexmk, because the output files of abcm2ps changed # even with identical input. # 4. The solution was to # a. Use a style file abc_get.sty that simply wrote the # specification on the tunes to the .aux file in a # completely deterministic fashion. # b. Instead of latex, use a script abclatex.pl that runs # latex and then extracts the abc contents for each tune # from the source abc file. This is also # deterministic. # c. Use a cusdep rule in latexmk to convert the tune abc # files to eps. This is non-deterministic, but only # gets called when the (deterministic) source file # changes. # This solves the problem. Latexmk works. Also, it is no # longer necessary to enable write18 in latex, and multiple # unnecessary runs of abcm2ps are no longer used. # # The order of testing and applying rules is chosen by the # following heuristics: # 1. Both latex and pdflatex may be used, but the resulting # aux files etc may not be completely identical. Define # latex and pdflatex as primary rules. Apply the general # method of repeated circulating through all rules until # the source files are stable for each primary rule # separately. Naturally the rules are all accessible # rules, but excluding primary rules except for the current # primary. # 2. Assume that the primary rules are relatively # time-consuming, so that unnecessary passes through them # to check stability of the source files should be avoided. # 3. Assume that although circular dependencies exist, the # rules can nevertheless be thought of as basically # non-circular, and that many rules are strictly or # normally non-circular. In particular cusdep rules are # typically non-circular (e.g., fig2eps), as are normal # output processing rules like dvi2ps. # 4. The order for the non-circular approximation is # determined by applying the assumption that an output file # from one rule that is read in for an earlier stage is # unchanged. # HOWEVER, at a first attempt, the ordering is not needed. It # only gives an optimization # 5. (Note that these assumptions could be violated, e.g., if # $dvips is arranged not only to do the basic dvips # command, but also to extract information from the ps file # and feed it back to an input file for (pdf)latex.) # 6. Nevertheless, the overall algorithm should allow # circularities. Then the general criterion of stability # of source files covers the general case, and also # robustly handles the case that the USER changes source # files during a run. This is particularly important in # -pvc mode, given that a full make on a large document can # be quite lengthy in time, and moreover that a user # naturally wishes to make corrections in response to # errors, particularly latex errors, and have them apply # right away. # This leads to the following approach: # 1. Classify accessible rules as: primary, pre-primary # (typically cusdep, bibtex, makeindex, etc), post-primary # (typically dvips, etc), and one-time # 2. Then stratify the rules into an order of application that # corresponds to the basic feedforward structure, with the # exclusion of one-time rules. # 3. Always require that one-time rules are among the # explicitly requested rules, i.e., the last to be applied, # were we to apply them. Anything else would not match the # idea of a one-time rule. # 4. Then work as follows: # a. Loop over primaries # b. For each primary, examine each pre-primary rule and # apply if needed, then the primary rule and then each # post-primary rule. The ordering of the pre-primary # and post-primary rules was found in step 2. # BUT applying the ordering is not essential # c. Any time that a pre-primary or primary rule is # applied, loop back to the beginning of step b. This # ensures that bibtex etc are applied before rerunning # (pdf)latex, and also covers changing source files, and # gives priority to quick pre-primary rules for changing # source files against slow reruns of latex. # d. Then apply post-primary rules in order, but not # looping back after each rule. This non-looping back # is because the rules are normally feed-forward only. # BUT applying the ordering is not essential # e. But after completing post-primary rules do loop back # to b if any rules were applied. This covers exotic # circular dependence (and as a byproduct, changing # source files). # f. On each case of looping back to b, re-evaluate the # dependence setup to allow for the effect of changing # source files. # local @requested_targets = @_; local %current_primaries = (); # Hash whose keys are primary rules # needed, i.e., known latex-like rules which trigger # circular dependencies local @pre_primary = (); # Array of rules local @post_primary = (); # Array of rules local @one_time = (); # Array of rules # For diagnostics on changed files, etc: local @changed = (); local @disappeared = (); local @no_dest = (); # Non-existent destination files local @rules_never_run = (); local @rules_to_apply = (); &rdb_classify_rules( \%possible_primaries, @requested_targets ); local %pass = (); local $failure = 0; # General accumulated error flag local $missing_dvi_pdf = ''; # Did primary run fail to make its output file? local $runs = 0; local $too_many_runs = 0; local %rules_applied = (); my $retry_msg = 0; # Did I earlier say I was going to attempt # another pass after a failure? PRIMARY: foreach my $primary (keys %current_primaries ) { foreach my $rule (keys %rule_db) { $pass{$rule} = 0; } PASS: while (1==1) { $runs = 0; my $previous_failure = $failure; $failure = 0; local $newrule_nofile = 0; # Flags whether rule created for # making currently non-existent file, which # could become a needed source file for a run # and therefore undo an error condition if ($diagnostics) { print "MakeB: doing pre_primary and primary...\n"; } rdb_for_some( [@pre_primary, $primary], \&rdb_makeB1 ); if ( ($runs > 0) && ! $too_many_runs ) { $retry_msg = 0; if ( $failure && $newrule_nofile ) { $retry_msg = 1; print "$My_name: Error on run, but found possibility to ", "make new source files\n"; next PASS; } elsif ( ! $failure ) { next PASS; } } elsif ($runs == 0) { # $failure not set on this pass, so use value from previous pass: $failure = $previous_failure; if ($retry_msg) { print "But in fact no new files made\n"; } } if ( $missing_dvi_pdf ) { # No output from primary, after completing circular dependence warn "Failure to make '$missing_dvi_pdf'\n"; $failure = 1; last PASS; } if ($failure && !$force_mode ) { last PASS; } if ($diagnostics) { print "MakeB: doing post_primary...\n"; } rdb_for_some( [@post_primary], \&rdb_makeB1 ); if ($failure) { last PASS; } if ($runs > 0) { next PASS; } # Get here if nothing was run. last PASS; } continue { # Re-evaluate rule classification and accessibility, # but do not change primaries. # Problem is that %current_primaries gets altered my %old_curr_prim = %current_primaries; &rdb_classify_rules( \%possible_primaries, @requested_targets ); %current_primaries = %old_curr_prim; &rdb_make_links; } } rdb_for_some( [@one_time], \&rdb_makeB1 ); rdb_write( $fdb_file ); if (! $silent) { # Diagnose of the runs if ( $#{keys %rules_applied } > -1 ) { print "$My_name: $runs runs. Rules applied:\n"; foreach (sort keys %rules_applied) { print " '$_'\n"; } } elsif ($failure && $force_mode) { print "$My_name: Errors, in force_mode: so I tried finishing targets\n"; } elsif ($failure) { print "$My_name: Errors, so I did not complete making targets\n"; } else { local @dests = (); rdb_for_some( [@_], sub{ push @dests, $$Pdest if ($$Pdest); } ); print "$My_name: All targets (@dests) are up-to-date\n"; } } return $failure; } #END rdb_makeB #------------------- sub rdb_show_rule_errors { local @messages = (); rdb_for_all( sub{ if ($$Plast_message ne '') { push @messages, "$rule: $$Plast_message"; } elsif ($$Plast_result == 1) { push @messages, "$rule: failed to create output file"; } elsif ($$Plast_result == 2) { push @messages, "$rule: gave an error"; } elsif ($$Prun_time == 0) { # This can have innocuous causes. So don't report # push @messages, "$rule: never run"; } } ); if ($#messages > -1) { warn "Collected error summary (may duplicate other messages):\n"; foreach (@messages){ warn " $_\n"; } } return $#messages+1; } #------------------- sub rdb_makeB1 { # Call: rdb_makeB1 # Helper routine for rdb_makeB. # Carries out make at level of given rule (all data available). # Assumes contexts for recursion, make, and rule, and # assumes that source files for the rule are to be considered # up-to-date. if ($diagnostics) { print " MakeB1 $rule\n"; } if ($failure & ! $force_mode) {return;} if ( ! defined $pass{$rule} ) {$pass{$rule} = 0; } &rdb_clear_change_record; if ( ($$Prun_time == 0) && exists($possible_primaries{$rule}) ) { push @rules_never_run, $rule; $$Pout_of_date = 1; $$Plast_result = -1; } else { if ( $$Pdest && (! -e $$Pdest) ) { # With a non-existent destination, if we haven't made any passes # through a rule, rerunning the rule is good, because the file # may fail to exist because of being deleted by the user (for ex.) # rather than because of a failure on a previous run. # (We could do better with a flag in fdb file.) # But after the first pass, the situation is different. # For a primary rule (pdf)latex, the lack of a destination file # could result from there being zero content due to a missing # essential input file. The input file could be generated # by a program to be run later (e.g., a cusdep or bibtex), # so we should wait until all passes are completed before # deciding a non-existent destination file is an error. # For a custom dependency, the rule may be obsolete, and # if the source file does not exist also, we should simply # not run the rule, but not set an error condition. # Any error will arise at the (pdf)latex level due to a # missing source file at that level. if ( ( $$Pcmd_type eq 'cusdep') && $$Psource && (! -e $$Psource) ) { # No action } elsif ( $$Pcmd_type eq 'delegated' ) { # Delegate to destination rule } elsif ( $pass{$rule}==0) { push @no_dest, $$Pdest; $$Pout_of_date = 1; } if ( $$Pcmd_type eq 'primary' ) { $missing_dvi_pdf = $$Pdest; } } } &rdb_flag_changes_here; if (!$$Pout_of_date) { #?? if ( ($$Pcmd_type eq 'primary') && (! $silent) ) { # print "Rule '$rule' up to date\n"; # } return; } if ($diagnostics) { print " remake\n"; } if (!$silent) { print "$My_name: applying rule '$rule'...\n"; &rdb_diagnose_changes( "Rule '$rule': " ); } $rules_applied{$rule} = 1; $runs++; # We are applying the rule, so its source file state for when it # was last made is as of now: # ??IS IT CORRECT TO DO NOTHING IN CURRENT VERSION? # The actual run my $return = 0; # Return code from called routine # Rule may have been created since last run: if ( ! defined $pass{$rule} ) {$pass{$rule} = 0; } if ( $pass{$rule} ge $max_repeat ) { # Avoid infinite loop by having a maximum repeat count # Getting here represents some kind of weird error. warn "$My_name: Maximum runs of $rule reached ", "without getting stable files\n"; $too_many_runs = 1; $failure = 1; $failure_msg = "'$rule' needed too many passes"; return; } $pass{$rule}++; warn_running( "Run number $pass{$rule} of rule '$rule'" ); if ($$Pcmd_type eq 'primary' ) { $return = &rdb_primary_run; } else { $return = &rdb_run1; } if ($$Pchanged) { $newrule_nofile = 1; $return = 0; } elsif ( $$Pdest && ( !-e $$Pdest ) && (! $failure) ){ # If there is a destination to make, but for some reason # it did not get made, and no other error was reported, # then a priori there appears to be an error condition: # the run failed. But there are two important cases in # which this is a wrong diagnosis. if ( ( $$Pcmd_type eq 'cusdep') && $$Psource && (! -e $$Psource) ) { # However, if the rule is a custom dependency, this is not by # itself an error, if also the source file does not exist. In # that case, we may have the situation that (1) the dest file is no # longer needed by the tex file, and (2) therefore the user # has deleted the source and dest files. After the next # latex run and the consequent analysis of the log file, the # cusdep rule will no longer be needed, and will be removed. # So in this case, do NOT report an error $$Pout_of_date = 0; } elsif ($$Pcmd_type eq 'primary' ) { # For a primary rule, i.e., (pdf)latex, not to produce the # expected output file may not be an error condition. # Diagnostics were handled in parsing the log file. # Special action in main loop inrdb_makeB1 $missing_dvi_pdf = $$Pdest; } else { $failure = 1; } } if ($return != 0) { $failure = 1; $$Plast_result = 2; $$Plast_message = $failure_msg = "Run of rule '$rule' gave a non-zero error code"; } } #END rdb_makeB1 #************************************************************ sub rdb_submakeB { # Call: rdb_submakeB # Makes all the source files for a given rule. # Assumes contexts for recursion, for make, and rule. %visited = %visited_at_rule_start; local $failure = 0; # Error flag my @v = keys %visited; #?? print "---submakeB $rule. @v \n"; rdb_do_files( sub{ rdb_recurse_rule( $$Pfrom_rule, 0,0,0, \&rdb_makeB1 ) } ); return $failure; } #END rdb_submakeB #************************************************************ sub rdb_classify_rules { # Usage: rdb_classify_rules( \%allowed_primaries, requested targets ) # Assume the following variables are available (global or local): # Input: # @requested_targets # Set to target rules # Output: # %current_primaries # Keys are actual primaries # @pre_primary # Array of rules # @post_primary # Array of rules # @one_time # Array of rules # @pre_primary and @post_primary are in natural order of application. local $P_allowed_primaries = shift; local @requested_targets = @_; local $state = 0; # Post-primary local @classify_stack = (); %current_primaries = (); @pre_primary = (); @post_primary = (); @one_time = (); rdb_recurseA( \@requested_targets, \&rdb_classify1, 0,0, \&rdb_classify2 ); # Reverse, as tendency is to find last rules first. @pre_primary = reverse @pre_primary; @post_primary = reverse @post_primary; if ($diagnostics) { print "Rule classification: \n"; if ($#requested_targets < 0) { print " No requested rules\n"; } else { print " Requested rules:\n"; foreach ( @requested_targets ) { print " $_\n"; } } if ($#pre_primary < 0) { print " No pre-primaries\n"; } else { print " Pre-primaries:\n"; foreach (@pre_primary) { print " $_\n"; } } print " Primaries:\n"; foreach (keys %current_primaries) { print " $_\n"; } if ($#post_primary < 0) { print " No post-primaries\n"; } else { print " Post-primaries:\n"; foreach (@post_primary) { print " $_\n"; } } if ($#one_time < 0) { print " No one_time rules\n"; } else { print " One_time rules:\n"; foreach ( @one_time ) { print " $_\n"; } } } #end diagnostics } #END rdb_classify_rules #------------------- sub rdb_classify1 { # Helper routine for rdb_classify_rules # Applied as rule_act1 in recursion over rules # Assumes rule context, and local variables from rdb_classify_rules #print "??======= '$rule' $depth $state ========== \n"; push @classify_stack, [$state]; if ( exists $possible_one_time{$rule} ) { # Normally, we will have already extracted the one_time rules, # and they will never be accessed here. But just in case of # problems or generalizations, we will cover all possibilities: if ($depth > 1) { warn "ONE TIME rule not at outer level '$rule'\n"; } push @one_time, $rule; } elsif ($state == 0) { if ( exists ${$P_allowed_primaries}{$rule} ) { $state = 1; # In primary rule $current_primaries{ $rule } = 1; } else { push @post_primary, $rule; } } else { $state = 2; # in post-primary rule push @pre_primary, $rule; } } #END rdb_classify1 #------------------- sub rdb_classify2 { # Helper routine for rdb_classify_rules # Applied as rule_act2 in recursion over rules # Assumes rule context ($state) = @{ pop @classify_stack }; } #END rdb_classify2 #************************************************************ sub rdb_run1 { # Assumes contexts for: rule. # Unconditionally apply the rule # Returns return code from applying the rule. # Otherwise: 0 on other kind of success, -1 on error. # Source file data, by definition, correspond to the file state just before # the latest run, and the run_time to the time just before the run: &rdb_update_filesA; $$Prun_time = time; $$Pchanged = 0; # No special changes in files $$Plast_result = 0; $$Plast_message = ''; # Return values for external command: my $return = 0; # Find any internal command my @int_args = @$PAint_cmd; my $int_cmd = shift @int_args; my @int_args_for_printing = @int_args; foreach (@int_args_for_printing) { if ( ! defined $_ ) { $_ = 'undef'; } } if ($int_cmd) { print "For rule '$rule', running '\&$int_cmd( @int_args_for_printing )' ...\n"; $return = &$int_cmd( @int_args ); } elsif ($$Pext_cmd) { $return = &rdb_ext_cmd; } else { warn "$My_name: Either a bug OR a configuration error:\n", " Need to implement the command for '$rule'\n"; &traceback(); $return = -1; $$Plast_result = 2; $$Plast_message = "Bug or configuration error; incorrect command type"; } if ( $rule =~ /^bibtex/ ) { my $retcode = &check_bibtex_log($$Pbase); if ($retcode == 3) { $$Plast_result = 2; $$Plast_message = "Could not open bibtex log file for '$$Pbase'"; push @warnings, $$Plast_message; } elsif ($retcode == 2) { } elsif ($retcode == 1) { push @warnings, "Bibtex warnings for '$$Pbase'"; } } $updated = 1; if ($$Ptest_kind == 3) { # We are time-criterion first time only. Now switch to # file-change criterion $$Ptest_kind = 1; } $$Pout_of_date = $$Pout_of_date_user = 0; if ( ($$Plast_result == 0) && ($return != 0) ) { $$Plast_result = 2; if ($$Plast_message eq '') { $$Plast_message = "Command gave return code $return"; } } elsif ( $$Pdest && (! -e $$Pdest) ) { $$Plast_result = 1; } return $return; } # END rdb_run1 #----------------- sub rdb_ext_cmd { # Call: rdb_ext_cmd # Assumes rule context. Runs external command with substitutions. # Uses defaults for the substitutions. See rdb_ext_cmd1. return rdb_ext_cmd1(); } #END rdb_ext_cmd #----------------- sub rdb_ext_cmd1 { # Call: rdb_ext_cmd1( options, source, dest, base ) or rdb_ext_cmd1() or ... # Assumes rule context. Returns command with substitutions. # Null arguments or unprovided arguments => use defaults. # for %S=source, %D=dest, %B=base, %R=root=base for latex, %O='', %T=texfile my ($options, $source, $dest, $base ) = @_; # Apply defaults $options ||= ''; $source ||= $$Psource; $dest ||= $$Pdest; $base ||= $$Pbase; my $ext_cmd = $$Pext_cmd; #Set character to surround filenames: my $q = $quote_filenames ? '"' : ''; %subst = ( '%O' => $options, '%R' => $q.$root_filename.$q, '%B' => $q.$base.$q, '%T' => $q.$texfile_name.$q, '%S' => $q.$source.$q, '%D' => $q.$dest.$q, '%%' => '%' # To allow literal %B, %R, etc, by %%B. ); my @tokens = split /(%.)/, $ext_cmd; foreach (@tokens) { if (exists($subst{$_})) { $_ = $subst{$_}; } } $ext_cmd = join '', @tokens; # print "quote is '$q'; ext_cmd = '$ext_cmd'\n"; my ($pid, $return) = &Run_msg($ext_cmd); return $return; } #END rdb_ext_cmd1 #----------------- sub rdb_primary_run { #?? See multipass_run in previous version Aug 2007 for issues # Call: rdb_primary_run # Assumes contexts for: recursion, make, & rule. # Assumes (a) the rule is a primary, # (b) a run has to be made, # (c) source files have been made. # This routine carries out the run of the rule unconditionally, # and then parses log file etc. my $return = 0; my $return_latex = &rdb_run1; if (-e $$Pdest) { $missing_dvi_pdf = '';} ######### Analyze results of run: if ( ! -e "$root_filename.log" ) { $failure = 1; $$Plast_result = 2; $$Plast_message = $failure_msg = "(Pdf)LaTeX failed to generate a log file"; return -1; } ####### NOT ANY MORE! Capture any changes in source file status before we # check for errors in the latex run # Find current set of source files: &rdb_set_from_logB; # For each file of the kind made by epstopdf.sty during a run, # if the file has changed during a run, then the new version of # the file will have been read during the run. Unlike the usual # case, we will NOT need to redo the primary run because of the # change of this file during the run. Therefore set the file as # up-to-date: rdb_do_files( sub { if ($$Pcorrect_after_primary) {&rdb_update1;} } ); # There may be new source files, and the run may have caused # circular-dependency files to be changed. And the regular # source files may have been updated during a lengthy run of # latex. So redo the makes for sources of the current rule: my $submake_return = &rdb_submakeB; &rdb_clear_change_record; &rdb_flag_changes_here; if ($$Pout_of_date && !$silent) { &rdb_diagnose_changes( "Rule '$rule': " ); } $updated = 1; # Flag that some dependent file has been remade # Fix the state of the files as of now: this will solve the # problem of latex and pdflatex interfering with each other, # at the expense of some non-optimality #?? Check this is correct: &rdb_update_filesA; if ( $diagnostics ) { print "$My_name: Rules after run: \n"; rdb_show(); } $return = $return_latex; if ($return_latex && $$Pout_of_date_user) { print "Error in (pdf)LaTeX, but change of user file(s), ", "so ignore error & provoke rerun\n" if (! $silent); $return = 0; } # Summarize issues that may have escaped notice: my @warnings = (); if ($bad_reference) { push @warnings, "Latex could not resolve all references"; } if ($bad_citation) { push @warnings, "Latex could not resolve all citations"; } if ($#warnings > 0) { show_array( "$My_name: Summary of warnings:", @warnings ); } return $return; } #END rdb_primary_run #************************************************************ sub rdb_clear_change_record { # Initialize diagnostics for reasons for running rule. @changed = (); @disappeared = (); @no_dest = (); # We are not now using this @rules_never_run = (); @rules_to_apply = (); # This is used in recursive application # of rdb_flag_changes_here, to list # rules that were out-of-date for some reason. } #END rdb_clear_change_record #************************************************************ sub rdb_flag_changes_here { # Flag changes in current rule. # Assumes rule context. local $dest_mtime = 0; $dest_mtime = get_mtime($$Pdest) if ($$Pdest); rdb_do_files( \&rdb_file_change1); if ($$Pout_of_date) { push @rules_to_apply, $rule; } #?? print "======== flag: $rule $$Pout_of_date ==========\n"; } #END rdb_flag_changes_here #************************************************************ sub rdb_file_change1 { # Call: &rdb_file_change1 # Assumes rule and file context. Assumes $dest_mtime set. # Flag whether $file in $rule has changed or disappeared. # Set rule's make flag if there's a change. my ($new_time, $new_size, $new_md5) = fdb_get($file); #?? print "FC1 '$rule':$file $$Pout_of_date TK=$$Ptest_kind\n"; #?? print " OLD $$Ptime, $$Psize, $$Pmd5\n", #?? " New $new_time, $new_size, $new_md5\n"; my $ext = ext( $file ); if ( ($new_size < 0) && ($$Psize >= 0) ) { # print "Disappeared '$file' in '$rule'\n"; push @disappeared, $file; # No reaction is good. #$$Pout_of_date = 1; # ??? 1 Sep. 2008: I do NOT think so, for cusdep no-file-exists issue # ??? 30 Sep 2008: I think I have this fixed. There were other changes # needed. No-change-flagged is correct. The array @disappeared flags # files that have disappeared, if I need to know. But having a source # file disappear is not a reason for a remake unless I know how to # make the file. If the file is a destination of a rule, that rule # will be rerun. It may be that the user is changing another source # in such a way that the disappeared file won't be needed. Before the # change is applied we get a superfluous infinite loop. return; } if ( ($new_size < 0) && ($$Psize < 0) ) { return; } if ( ($new_size != $$Psize) || ($new_md5 ne $$Pmd5) ) { #?? print "FC1: changed $file: ($new_size != $$Psize) $new_md5 ne $$Pmd5)\n"; push @changed, $file; $$Pout_of_date = 1; if ( ! exists $generated_exts_all{$ext} ) { $$Pout_of_date_user = 1; } } if ( ( ($$Ptest_kind == 2) || ($$Ptest_kind == 3) ) && (! exists $generated_exts_all{$ext} ) && ( $new_time > $dest_mtime ) ) { #?? print "FC1: changed $file: ($new_time > $dest_mtime)\n"; push @changed, $file; $$Pout_of_date = $$Pout_of_date_user = 1; } } #END rdb_file_change1 #************************************************************ sub rdb_have_changes { &rdb_clear_change_record; rdb_recurseA( [@_], \&rdb_flag_changes_here ); return ($#changed >= 0) || ($#no_dest >= 0) || ($#rules_to_apply >= 0); } #END rdb_have_changes #************************************************************ sub rdb_diagnose_changes { # Call: rdb_diagnose_changes or rdb_diagnose_changes( heading ) # List changes on STDERR # Precede the message by the optional heading, else by "$My_name: " my $heading = defined($_[0]) ? $_[0] : "$My_name: "; if ($#rules_never_run >= 0) { warn "${heading}Rules & subrules not known to be previously run:\n"; foreach (@rules_never_run) { warn " $_\n"; } } if ( ($#changed >= 0) || ($#disappeared >= 0) || ($#no_dest >= 0) ) { warn "${heading}File changes, etc:\n"; if ( $#changed >= 0 ) { warn " Changed files, or newly in use since previous run(s):\n"; foreach (uniqs(@changed)) { warn " '$_'\n"; } } if ( $#disappeared >= 0 ) { warn " No-longer-existing files:\n"; foreach (uniqs(@disappeared)) { warn " '$_'\n"; } } if ( $#no_dest >= 0 ) { warn " Non-existent destination files:\n"; foreach (uniqs(@no_dest)) { warn " '$_'\n"; } } } elsif ($#rules_to_apply >=0) { warn "${heading}The following rules & subrules became out-of-date:\n"; foreach (@rules_to_apply) { warn " '$_'\n"; } } else { warn "${heading}No file changes\n"; } } #END rdb_diagnose_changes #************************************************************ #************************************************************ #************************************************************ #************************************************************ #************************************************************ #************************************************************ #************************************************************ #************************************************************ # Routines for convenient looping and recursion through rule database # ================= NEW VERSION ================ # There are several places where we need to loop through or recurse # through rules and files. This tends to involve repeated, tedious # and error-prone coding of much book-keeping detail. In particular, # working on files and rules needs access to the variables involved, # which either involves direct access to the elements of the database, # and consequent fragility against changes and upgrades in the # database structure, or involves lots of routines for reading and # writing data in the database, then with lots of repetitious # house-keeping code. # # The routines below provide a solution. Looping and recursion # through the database are provided by a set of basic routines where # each necessary kind of looping and iteration is coded once. The # actual actions are provided as references to action subroutines. # (These can be either actual references, as in \&routine, or # anonymous subroutines, as in sub{...}, or aas a zero value 0 or an # omitted argument, to indicate that no action is to be performed.) # # When the action subroutine(s) are actually called, a context for the # rule and/or file (as appropriate) is given by setting named ## NEW ?? # variables to REFERENCES to the relevant data values. These can be # used to retrieve and set the data values. As a convention, # references to scalars are given by variables named start with "$P", # as in "$Pdest", while references to arrays start with "$PA", as in # "$PAint_cmd", and references to hashes with "$PH", as in "$PHsource". # After the action subroutine has finished, checks for data # consistency may be made. ## ??? OLD # variables to the relevant data values. After the action subroutine # has finished, the database is updated with the values of these named # variables, with any necessary consistency checks. Thus the action # subroutines can act on sensibly named variables without needed to # know the database structure. # # The only routines that actually use the database structure and need # to be changed if that is changed are: (a) the routines rdb_one_rule # and rdb_one_file that implement the calling of the action subroutines, # (b) routines for creation of single rules and file items, and (c) to # a lesser extent, the routine for destroying a file item. # # Note that no routine is provided for destroying a rule. During a # run, a rule, with its source files, may become inaccessible or # unused. This happens dynamically, depending on the dependencies # caused by changes in the source file or by error conditions that # cause the computation of dependencies, particular of latex files, to # become wrong. In that situation the files certainly come and go in # the database, but subsidiary rules, with their content information # on their source files, need to be retained so that their use can be # reinstated later depending on dynamic changes in other files. # # However, there is a potential memory leak unless some pruning is # done in what is written to the fdb file. (Probably only accessible # rules and those for which source files exist. Other cases have no # relevant information that needs to be preserved between runs.) # # #************************************************************ # First the top level routines for recursion and iteration #************************************************************ sub rdb_recurseA { # Call: rdb_recurseA( rule | [ rules], # \&rule_act1, \&file_act1, \&file_act2, # \&rule_act2 ) # The actions are pointers to subroutines, and may be null (0, or # undefined) to indicate no action to be applied. # Recursively acts on the given rules and all ancestors: # foreach rule found: # apply rule_act1 # loop through its files: # apply file_act1 # act on its ancestor rule, if any # apply file_act2 # apply rule_act2 # Guards against loops. # Access to the rule and file data by local variables, only # for getting and setting. # This routine sets a context for anything recursive, with @heads, # %visited and $depth being set as local variables. local @heads = (); my $rules = shift; # Distinguish between single rule (a string) and a reference to an # array of rules: if ( ref $rules eq 'ARRAY' ) { @heads = @$rules; } else { @heads = ( $rules ); } # Keep a list of visited rules, used to block loops in recursion: local %visited = (); local $depth = 0; foreach $rule ( @heads ) { rdb_recurse_rule( $rule, @_ ); } } #END rdb_recurseA #************************************************************ sub rdb_for_all { # Call: rdb_for_all( \&rule_act1, \&file_act, \&rule_act2 ) # Loops through all rules and their source files, using the # specified set of actions, which are pointers to subroutines. # Sorts rules alphabetically. # See rdb_for_some for details. rdb_for_some( [ sort keys %rule_db ], @_); } #END rdb_for_all #************************************************************ sub rdb_for_some { # Call: rdb_for_some( rule | [ rules], # \&rule_act1, \&file_act, \&rule_act2) # Actions can be zero, and rules at tail of argument list can be # omitted. E.g. rdb_for_some( rule, 0, \&file_act ). # Anonymous subroutines can be used, e.g., rdb_for_some( rule, sub{...} ). # # Loops through rules and their source files, using the # specified set of rules: # foreach rule: # apply rule_act1 # loop through its files: # apply file_act # apply rule_act2 # # Rule data and file data are made available in local variables # for access by the subroutines. local @heads = (); my $rules = shift; # Distinguish between single rule (a string) and a reference to an # array of rules: if ( ref $rules eq 'ARRAY' ) { @heads = @$rules; } else { @heads = ( $rules ); } foreach $rule ( @heads ) { # $rule is implicitly local &rdb_one_rule( $rule, @_ ); } } #END rdb_for_some #************************************************************ sub rdb_for_one_file { my $rule = shift; # Avoid name collisions with general recursion and iteraction routines: local $file1 = shift; local $action1 = shift; rdb_for_some( $rule, sub{rdb_one_file($file1,$action1)} ); } #END rdb_for_one_file #************************************************************ # Routines for inner part of recursion and iterations #************************************************************ sub rdb_recurse_rule { # Call: rdb_recurse_rule($rule, \&rule_act1, \&file_act1, \&file_act2, # \&rule_act2 ) # to do the work for one rule, recurisvely called from_rules for # the sources of the rules. # Assumes recursion context, i.e. that %visited, @heads, $depth. # We are overriding actions: my ($rule, $rule_act1, $new_file_act1, $new_file_act2, $rule_act2) = @_; # and must propagate the file actions: local $file_act1 = $new_file_act1; local $file_act2 = $new_file_act2; # Prevent loops: if ( (! $rule) || exists $visited{$rule} ) { return; } $visited{$rule} = 1; # Recursion depth $depth++; # We may need to repeat actions on dependent rules, without being # blocked by the test on visited files. So save %visited: local %visited_at_rule_start = %visited; # At end, the last value set for %visited wins. rdb_one_rule( $rule, $rule_act1, \&rdb_recurse_file, $rule_act2 ); $depth--; } #END rdb_recurse_rule #************************************************************ sub rdb_recurse_file { # Call: rdb_recurse_file to do the work for one file. # This has no arguments, since it is used as an action subroutine, # passed as a reference in calls in higher-level subroutine. # Assumes contexts set for: Recursion, rule, and file &$file_act1 if $file_act1; rdb_recurse_rule( $$Pfrom_rule, $rule_act1, $file_act1, $file_act2, $rule_act2 ) if $$Pfrom_rule; &$file_act2 if $file_act2; } #END rdb_recurse_file #************************************************************ sub rdb_do_files { # Assumes rule context, including $PHsource. # Applies an action to all the source files of the rule. local $file_act = shift; my @file_list = sort keys %$PHsource; foreach my $file ( @file_list ){ rdb_one_file( $file, $file_act ); } } #END rdb_do_files #************************************************************ # Routines for action on one rule and one file. These are the main # places (in addition to creation and destruction routines for rules # and files) where the database structure is accessed. #************************************************************ sub rdb_one_rule { # Call: rdb_one_rule( $rule, $rule_act1, $file_act, $rule_act2 ) # Sets context for rule and carries out the actions. #===== Accesses rule part of database structure ======= local ( $rule, $rule_act1, $file_act, $rule_act2 ) = @_; #?? &R1; if ( (! $rule) || ! rdb_rule_exists($rule) ) { return; } local ( $PArule_data, $PHsource ) = @{$rule_db{$rule}}; local ($Pcmd_type, $Pext_cmd, $PAint_cmd, $Ptest_kind, $Psource, $Pdest, $Pbase, $Pout_of_date, $Pout_of_date_user, $Prun_time, $Pchanged, $Plast_result, $Plast_message ) = Parray( $PArule_data ); # Correct array ref: $PAint_cmd = $$PArule_data[2]; &$rule_act1 if $rule_act1; &rdb_do_files( $file_act ) if $file_act; &$rule_act2 if $rule_act2; #?? &R2; } #END rdb_one_rule #************************************************************ sub rdb_one_file { # Call: rdb_one_file($file, $file_act) # Sets context for file and carries out the action. # Assumes $rule context set. #===== Accesses file part of database structure ======= local ($file, $file_act) = @_; #?? &F1; if ( (!$file) ||(!exists ${$PHsource}{$file}) ) { return; } local $PAfile_data = ${$PHsource}{$file}; local ($Ptime, $Psize, $Pmd5, $Pfrom_rule, $Pcorrect_after_primary ) = Parray( $PAfile_data ); &$file_act if $file_act; if ( ! rdb_rule_exists( $$Pfrom_rule ) ) { $$Pfrom_rule = ''; } #?? &F2; } #END rdb_one_file #************************************************************ # Routines for creation of rules and file items, and for removing file # items. #************************************************************ sub rdb_create_rule { # rdb_create_rule( rule, command_type, ext_cmd, int_cmd, test_kind, # source, dest, base, # needs_making, run_time ) # int_cmd is either a string naming a perl subroutine or it is a # reference to an array containing the subroutine name and its # arguments. # Makes rule. Error if it already exists. # Omitted arguments: replaced by 0 or '' as needed. # ==== Sets rule data ==== my ( $rule, $cmd_type, $int_cmd, $PAext_cmd, $test_kind, $source, $dest, $base, $needs_making, $run_time ) = @_; my $changed = 0; # Set defaults, and normalize parameters: foreach ( $cmd_type, $int_cmd, $PAext_cmd, $source, $dest, $base ) { if (! defined $_) { $_ = ''; } } foreach ( $needs_making, $run_time, $test_kind ) { if (! defined $_) { $_ = 0; } } if (!defined $test_kind) { # Default to test on file change $test_kind = 1; } if ( ref( $PAext_cmd ) eq '' ) { # It is a single command. Convert to array reference: $PAext_cmd = [ $PAext_cmd ]; } else { # COPY the referenced array: $PAext_cmd = [ @$PAext_cmd ]; } $rule_db{$rule} = [ [$cmd_type, $int_cmd, $PAext_cmd, $test_kind, $source, $dest, $base, $needs_making, 0, $run_time, $changed, -1, '' ], {} ]; if ($source) { rdb_ensure_file( $rule, $source ); } } #END rdb_create_rule #************************************************************ sub rdb_ensure_file { # rdb_ensure_file( rule, file[, fromrule[, set_not_exists]] ) # Ensures the source file item exists in the given rule. # Then if the fromrule is specified, set it for the file item. # If the item is created, then: # (a) by default initialize it to current file state. # (b) but if the fourth argument, set_not_exists, is true, # initialize the item as if the file does not exist. # This case is typically used when the log file for a run # of latex/pdflatex claims that the file was non-existent # at the beginning of a run. #============ rule and file data set here ====================================== my $rule = shift; local ( $new_file, $new_from_rule, $set_not_exists ) = @_; if ( ! rdb_rule_exists( $rule ) ) { die_trace( "$My_name: BUG in rdb_ensure_file: non-existent rule '$rule'" ); } if ( ! defined $new_file ) { die_trace( "$My_name: BUG in rdb_ensure_file: undefined file for '$rule'" ); } if ( ! defined $set_not_exists ) { $set_not_exists = 0; } rdb_one_rule( $rule, sub{ if (! exists ${$PHsource}{$new_file} ) { if ( $set_not_exists ) { ${$PHsource}{$new_file} = [0, -1, 0, '', 0]; } else { ${$PHsource}{$new_file} = [fdb_get($new_file), '', 0]; } } } ); if (defined $new_from_rule ) { rdb_for_one_file( $rule, $new_file, sub{ $$Pfrom_rule = $new_from_rule; }); } } #END rdb_ensure_file #************************************************************ sub rdb_remove_files { # rdb_remove_file( rule, file,... ) # Removes file(s) for the rule. my $rule = shift; if (!$rule) { return; } local @files = @_; rdb_one_rule( $rule, sub{ foreach (@files) { delete ${$PHsource}{$_}; } } ); } #END rdb_remove_files #************************************************************ sub rdb_rule_exists { # Call rdb_rule_exists($rule): Returns whether rule exists. my $rule = shift; if (! $rule ) { return 0; } return exists $rule_db{$rule}; } #END rdb_rule_exists #************************************************************ sub rdb_file_exists { # Call rdb_file_exists($rule, $file): # Returns whether source file item in rule exists. local ( $rule, $file ) = @_; local $exists = 0; rdb_one_rule( $rule, sub{ $exists = exists( ${$PHsource}{$file} ) ? 1:0; } ); return $exists; } #END rdb_file_exists #************************************************************ sub rdb_update_gen_files { # Call: fdb_updateA # Assumes rule context. Update source files of rule to current state. rdb_do_files( sub{ if ( exists $generated_exts_all{ ext($file) } ) {&rdb_update1;} } ); } #END rdb_update_gen_files #************************************************************ sub rdb_update_filesA { # Call: fdb_updateA # Assumes rule context. Update source files of rule to current state. rdb_do_files( \&rdb_update1 ); } #************************************************************ sub rdb_update1 { # Call: fdb_update1. # Assumes file context. Updates file data to correspond to # current file state on disk ($$Ptime, $$Psize, $$Pmd5) = fdb_get($file); } #************************************************************ sub rdb_set_file1 { # Call: fdb_file1(rule, file, new_time, new_size, new_md5) # Sets file time, size and md5. my $rule = shift; my $file = shift; local @new_file_data = @_; rdb_for_one_file( $rule, $file, sub{ ($$Ptime,$$Psize,$$Pmd5)=@new_file_data; } ); } #************************************************************ sub rdb_dummy_file { # Returns file data for non-existent file # ==== Uses rule_db structure ==== return (0, -1, 0, ''); } #************************************************************ #************************************************************ # Predefined subroutines for custom dependency sub cus_dep_delete_dest { # This subroutine is used for situations like epstopdf.sty, when # the destination (target) of the custom dependency invoking # this subroutine will be made by the primary run provided the # file (destination of the custom dependency, source of the # primary run) doesn't exist. # It is assumed that the resulting file will be read by the # primary run. # Remove the destination file, to indicate it needs to be remade: unlink $$Pdest; # Arrange that the non-existent destination file is not treated as # an error. The variable changed here is a bit misnamed. $$Pchanged = 1; # Ensure a primary run is done &cus_dep_require_primary_run; # Return success: return 0; } #************************************************************ sub cus_dep_require_primary_run { # This subroutine is used for situations like epstopdf.sty, when # the destination (target) of the custom dependency invoking # this subroutine will be made by the primary run provided the # file (destination of the custom dependency, source of the # primary run) doesn't exist. # It is assumed that the resulting file will be read by the # primary run. local $cus_dep_target = $$Pdest; # Loop over all rules and source files: rdb_for_all( 0, sub { if ($file eq $cus_dep_target) { $$Pout_of_date = 1; $$Pcorrect_after_primary = 1; } } ); # Return success: return 0; } #************************************************************ #************************************************************ #************************************************************ # # UTILITIES: # #************************************************************ # Miscellaneous sub show_array { # For use in diagnostics and debugging. # On stderr, print line with $_[0] = label. # Then print rest of @_, one item per line preceeded by some space warn "$_[0]\n"; shift; if ($#_ >= 0) { foreach (@_){ warn " '$_'\n";} } else { warn " NONE\n"; } } #************************************************************ sub Parray { # Call: Parray( \@A ) # Returns array of references to the elements of @A my $PA = shift; my @P = (undef) x (1+$#$PA); foreach my $i (0..$#$PA) { $P[$i] = \$$PA[$i]; } return @P; } #************************************************************ sub glob_list { # Glob a collection of filenames. Sort and eliminate duplicates # Usage: e.g., @globbed = glob_list(string, ...); my @globbed = (); foreach (@_) { push @globbed, glob; } return uniqs( @globbed ); } #================================================== sub glob_list1 { # Glob a collection of filenames. # But no sorting or elimination of duplicates # Usage: e.g., @globbed = glob_list1(string, ...); # Since perl's glob appears to use space as separator, I'll do a special check # for existence of non-globbed file (assumed to be tex like) my @globbed = (); foreach my $file_spec (@_) { # Problem, when the PATTERN contains spaces, the space(s) are # treated as pattern separaters (in MSWin at least). # MSWin: I can quote the pattern (is that MSWin native, or also # cygwin?) # Linux: Quotes in a pattern are treated as part of the filename! # So quoting a pattern is definitively wrong. # The following hack solves this partly, for the cases that there is no wildcarding # and the specified file exists possibly space-containing, and that there is wildcarding, # but spaces are prohibited. if ( -e $file_spec || -e "$file_spec.tex" ) { # Non-globbed file exists, return the file_spec. # Return $file_spec only because this is not a file-finding subroutine, but # only a globber push @globbed, $file_spec; } else { # This glob fails to work as desired, if the pattern contains spaces. push @globbed, glob( "$file_spec" ); } } return @globbed; } #************************************************************ # Miscellaneous sub prefix { #Usage: prefix( string, prefix ); #Return string with prefix inserted at the front of each line my @line = split( /\n/, $_[0] ); my $prefix = $_[1]; for (my $i = 0; $i <= $#line; $i++ ) { $line[$i] = $prefix.$line[$i]."\n"; } return join( "", @line ); } #************************************************************ #************************************************************ # File handling utilities: #************************************************************ sub get_latest_mtime # - arguments: each is a filename. # - returns most recent modify time. { my $return_mtime = 0; foreach my $include (@_) { my $include_mtime = &get_mtime($include); # The file $include may not exist. If so ignore it, otherwise # we'll get an undefined variable warning. if ( ($include_mtime) && ($include_mtime > $return_mtime) ) { $return_mtime = $include_mtime; } } return $return_mtime; } #************************************************************ sub get_mtime_raw { my $mtime = (stat($_[0]))[9]; return $mtime; } #************************************************************ sub get_mtime { return get_mtime0($_[0]); } #************************************************************ sub get_mtime0 { # Return time of file named in argument # If file does not exist, return 0; if ( -e $_[0] ) { return get_mtime_raw($_[0]); } else { return 0; } } #************************************************************ sub get_size { # Return time of file named in argument # If file does not exist, return 0; if ( -e $_[0] ) { return get_size_raw($_[0]); } else { return 0; } } #************************************************************ sub get_size_raw { my $size = (stat($_[0]))[7]; return $size; } #************************************************************ sub get_time_size { # Return time and size of file named in argument # If file does not exist, return (0,-1); if ( -e $_[0] ) { return get_time_size_raw($_[0]); } else { return (0,-1); } } #************************************************************ sub get_time_size_raw { my $mtime = (stat($_[0]))[9]; my $size = (stat($_[0]))[7]; return ($mtime, $size); } #************************************************************ sub get_checksum_md5 { my $source = shift; my $input = new FileHandle; my $md5 = Digest->MD5; my $ignore_pattern = ''; if ( $source eq "" ) { # STDIN: open( $input, '-' ); } else { open( $input, '<', $source ) or return 0; my ($base, $path, $ext) = fileparseA( $source ); $ext =~ s/^\.//; if ( exists $hash_calc_ignore_pattern{$ext} ) { $ignore_pattern = $hash_calc_ignore_pattern{$ext}; } } if ( $ignore_pattern ) { while (<$input>) { if ( /$ignore_pattern/ ){ $_= ''; } $md5->add($_); } } else { $md5->addfile($input); } close $input; return $md5->hexdigest(); } #************************************************************ #?? OBSOLETE # Find file with default extension # Usage: find_file_ext( name, default_ext, ref_to_array_search_path) sub find_file_ext #?? Need to use kpsewhich, if possible. Leave to find_file? { my $full_filename = shift; my $ext = shift; my $ref_search_path = shift; my $full_filename1 = &find_file($full_filename, $ref_search_path, '1'); #print "Finding \"$full_filename\" with ext \"$ext\" ... "; if (( $full_filename1 eq '' ) || ( ! -e $full_filename1 )) { my $full_filename2 = &find_file("$full_filename.$ext",$ref_search_path,'1'); if (( $full_filename2 ne '' ) && ( -e $full_filename2 )) { $full_filename = $full_filename2; } else { $full_filename = $full_filename1; } } else { $full_filename = $full_filename1; } #print "Found \"$full_filename\".\n"; return $full_filename; } #************************************************************ #?? OBSOLETE # given filename and path, return full name of file, or die if none found. # when force_include_mode=1, only warn if an include file was not # found, and return 0 (PvdS). # Usage: find_file(name, ref_to_array_search_path, warn_on_continue) sub find_file #?? Need to use kpsewhich, if possible { my $name = $_[0]; my $ref_path = $_[1]; my $dir; if ( $name =~ /^\// ) { #Aboslute pathname (by UNIX standards) if ( (!-e $name) && ( $_[2] eq '' ) ) { if ($force_include_mode) { warn "$My_name: Could not find file [$name]\n"; } else { die "$My_name: Could not find file [$name]\n"; } } return $name; } # Relative pathname foreach $dir ( @{$ref_path} ) { #warn "\"$dir\", \"$name\"\n"; if (-e "$dir/$name") { return("$dir/$name"); } } if ($force_include_mode) { if ( $_[2] eq '' ) { warn "$My_name: Could not find file [$name] in path [@{$ref_path}]\n"; warn " assuming in current directory (./$name)\n"; } return("./$name"); } else { if ( $_[2] ne '' ) { return(''); } # warn "\"$name\", \"$ref_path\", \"$dir\"\n"; die "$My_name: Could not find file [$name] in path [@{$ref_path}]\n"; } } #************************************************************ sub find_file1 { #?? Need to use kpsewhich, if possible # Usage: find_file1(name, ref_to_array_search_path) # Modified find_file, which doesn't die. # Given filename and path, return array of: # full name # retcode # On success: full_name = full name with path, retcode = 0 # On failure: full_name = given name, retcode = 1 my $name = $_[0]; # Make local copy of path, since we may rewrite it! my @path = @{$_[1]}; if ( $name =~ /^\// ) { # Absolute path (if under UNIX) # This needs fixing, in general if (-e $name) { return( $name, 0 );} else { return( $name, 1 );} } foreach my $dir ( @path ) { #??print "-------------dir='$dir', "; # Make $dir concatenatable, and empty for current dir: if ( $dir eq '.' ) { $dir = ''; } elsif ( $dir =~ /[\/\\:]$/ ) { #OK if dir ends in / or \ or : } elsif ( $dir ne '' ) { #Append directory separator only to non-empty dir $dir = "$dir/"; } #?? print " newdir='$dir'\n"; if (-e "$dir$name") { return("$dir$name", 0); } } my @kpse_result = kpsewhich( $name ); if ($#kpse_result > -1) { return( $kpse_result[0], 0); } return("$name" , 1); } #END find_file1 #************************************************************ sub find_file_list1 { # Modified version of find_file_list that doesn't die. # Given output and input arrays of filenames, a file suffix, and a path, # fill the output array with full filenames # Return a status code: # Retcode = 0 on success # Retocde = 1 if at least one file was not found # Usage: find_file_list1( ref_to_output_file_array, # ref_to_input_file_array, # suffix, # ref_to_array_search_path # ) my $ref_output = $_[0]; my $ref_input = $_[1]; my $suffix = $_[2]; my $ref_search = $_[3]; #?? show_array( "=====find_file_list1. Suffix: '$suffix'\n Source:", @$ref_input ); #?? show_array( " Bibinputs:", @$ref_search ); my @return_list = (); # Generate list in local array, since input # and output arrays may be same my $retcode = 0; foreach my $file (@$ref_input) { my ($tmp_file, $find_retcode) = &find_file1( "$file$suffix", $ref_search ); if ($tmp_file) { push @return_list, $tmp_file; } if ( $find_retcode != 0 ) { $retcode = 1; } } @$ref_output = @return_list; #?? show_array( " Output", @$ref_output ); #?? foreach (@$ref_output) { if ( /\/\// ) { print " ====== double slash in '$_'\n"; } } return $retcode; } #END find_file_list1 #************************************************************ sub kpsewhich { # Usage: kpsewhich( filespec, ...) # Returns array of files with paths as found by kpsewhich # kpsewhich( 'try.sty', 'jcc.bib' ); # Can also do, e.g., # kpsewhich( '-format=bib', 'trial.bib', 'file with spaces'); my $cmd = $kpsewhich; my @args = @_; foreach (@args) { if ( ! /^-/ ) { $_ = "\"$_\""; } } foreach ($cmd) { s/%[RBTDO]//g; } $cmd =~ s/%S/@args/g; my @found = (); local $fh; open $fh, "$cmd|" or die "Cannot open pipe for \"$cmd\"\n"; while ( <$fh> ) { s/^\s*//; s/\s*$//; push @found, $_; } close $fh; # show_array( "Kpsewhich: '$cmd', '$file_list' ==>", @found ); return @found; } #################################################### sub add_cus_dep { # Usage: add_cus_dep( from_ext, to_ext, flag, sub_name ) # Add cus_dep after removing old versions my ($from_ext, $to_ext, $must, $sub_name) = @_; remove_cus_dep( $from_ext, $to_ext ); push @cus_dep_list, "$from_ext $to_ext $must $sub_name"; } #################################################### sub remove_cus_dep { # Usage: remove_cus_dep( from_ext, to_ext ) my ($from_ext, $to_ext) = @_; my $i = 0; while ($i <= $#cus_dep_list) { if ( $cus_dep_list[$i] =~ /^$from_ext $to_ext / ) { splice @cus_dep_list, $i, 1; } else { $i++; } } } #################################################### sub show_cus_dep { show_array( "Custom dependency list:", @cus_dep_list ); } #################################################### sub add_input_ext { # Usage: add_input_ext( rule, ext, ... ) # Add extension(s) (specified without a leading period) to the # list of input extensions for the given rule. The rule should be # 'latex' or 'pdflatex'. These extensions are used when an input # file without an extension is found by (pdf)latex, as in # \input{file} or \includegraphics{figure}. When latexmk searches # custom dependencies to make the missing file, it will assume that # the file has one of the specified extensions. my $rule = shift; if ( ! exists $input_extensions{$rule} ) { $input_extensions{$rule} = {}; } my $Prule = $input_extensions{$rule}; foreach (@_) { $$Prule{$_} = 1; } } #################################################### sub remove_input_ext { # Usage: remove_input_ext( rule, ext, ... ) # Remove extension(s) (specified without a leading period) to the # list of input extensions for the given rule. The rule should be # 'latex' or 'pdflatex'. See sub add_input_ext for the use. my $rule = shift; if ( ! exists $input_extensions{$rule} ) { return; } my $Prule = $input_extensions{$rule}; foreach (@_) { delete $$Prule{$_}; } } #################################################### sub show_input_ext { # Usage: show_input_ext( rule ) my $rule = shift; show_array ("Input extensions for rule '$rule': ", keys %{$input_extensions{$rule}} ); } #################################################### sub find_dirs1 { # Same as find_dirs, but argument is single string with directories # separated by $search_path_separator find_dirs( &split_search_path( $search_path_separator, ".", $_[0] ) ); } #************************************************************ sub find_dirs { # @_ is list of directories # return: same list of directories, except that for each directory # name ending in //, a list of all subdirectories (recursive) # is added to the list. # Non-existent directories and non-directories are removed from the list # Trailing "/"s and "\"s are removed local @result = (); my $find_action = sub { ## Subroutine for use in File::find ## Check to see if we have a directory if (-d) { push @result, $File::Find::name; } }; foreach my $directory (@_) { my $recurse = ( $directory =~ m[//$] ); # Remove all trailing /s, since directory name with trailing / # is not always allowed: $directory =~ s[/+$][]; # Similarly for MSWin reverse slash $directory =~ s[\\+$][]; if ( ! -e $directory ){ next; } elsif ( $recurse ){ # Recursively search directory find( $find_action, $directory ); } else { push @result, $directory; } } return @result; } #************************************************************ sub uniq # Read arguments, delete neighboring items that are identical, # return array of results { my @sort = (); my ($current, $prev); my $first = 1; while (@_) { $current = shift; if ($first || ($current ne $prev) ) { push @sort, $current; $prev = $current; $first = 0; } } return @sort; } #================================================== sub uniq1 { # Usage: uniq1( strings ) # Returns array of strings with duplicates later in list than # first occurence deleted. Otherwise preserves order. my @strings = (); my %string_hash = (); foreach my $string (@_) { if (!exists( $string_hash{$string} )) { $string_hash{$string} = 1; push @strings, $string; } } return @strings; } #************************************************************ sub uniqs { # Usage: uniq2( strings ) # Returns array of strings sorted and with duplicates deleted return uniq( sort @_ ); } #************************************************************ sub ext { # Return extension of filename. Extension includes the period my $file_name = $_[0]; my ($base_name, $path, $ext) = fileparseA( $file_name ); return $ext; } #************************************************************ sub fileparseA { # Like fileparse but replace $path for current dir ('./' or '.\') by '' # Also default second argument to get normal extension. my $given = $_[0]; my $pattern = '\.[^\.]*'; if ($#_ > 0 ) { $pattern = $_[1]; } my ($base_name, $path, $ext) = fileparse( $given, $pattern ); if ( ($path eq './') || ($path eq '.\\') ) { $path = ''; } return ($base_name, $path, $ext); } #************************************************************ sub fileparseB { # Like fileparse but with default second argument for normal extension my $given = $_[0]; my $pattern = '\.[^\.]*'; if ($#_ > 0 ) { $pattern = $_[1]; } my ($base_name, $path, $ext) = fileparse( $given, $pattern ); return ($base_name, $path, $ext); } #************************************************************ sub split_search_path { # Usage: &split_search_path( separator, default, string ) # Splits string by separator and returns array of the elements # Allow empty last component. # Replace empty terms by the default. my $separator = $_[0]; my $default = $_[1]; my $search_path = $_[2]; my @list = split( /$separator/, $search_path); if ( $search_path =~ /$separator$/ ) { # If search path ends in a blank item, the split subroutine # won't have picked it up. # So add it to the list by hand: push @list, ""; } # Replace each blank argument (default) by current directory: for ($i = 0; $i <= $#list ; $i++ ) { if ($list[$i] eq "") {$list[$i] = $default;} } return @list; } ################################# sub tempfile1 { # Makes a temporary file of a unique name. I could use file::temp, # but it is not present in all versions of perl # Filename is of form $tmpdir/$_[0]nnn$suffix, where nnn is an integer my $tmp_file_count = 0; my $prefix = $_[0]; my $suffix = $_[1]; while (1==1) { # Find a new temporary file, and make it. $tmp_file_count++; my $tmp_file = "${tmpdir}/${prefix}${tmp_file_count}${suffix}"; if ( ! -e $tmp_file ) { open( TMP, ">$tmp_file" ) or next; close(TMP); return $tmp_file; } } die "$My_name.tempfile1: BUG TO ARRIVE HERE\n"; } ################################# #************************************************************ #************************************************************ # Process/subprocess routines sub Run_msg { # Same as Run, but give message about my running warn_running( "Running '$_[0]'" ); Run($_[0]); } sub Run { # Usage: Run ("program arguments "); # or Run ("start program arguments"); # or Run ("NONE program arguments"); # First form is just a call to system, and the routine returns after the # program has finished executing. # Second form (with 'start') runs the program detached, as appropriate for # the operating system: It runs "program arguments &" on UNIX, and # "start program arguments" on WIN95 and WINNT. If multiple start # words are at the beginning of the command, the extra ones are removed. # Third form (with 'NONE') does not run anything, but prints an error # message. This is provided to allow program names defined in the # configuration to flag themselves as unimplemented. # Return value is a list (pid, exitcode): # If process is spawned sucessfully, and I know the PID, # return (pid, 0), # else if process is spawned sucessfully, but I do not know the PID, # return (0, 0), # else if process is run, # return (0, exitcode of process) # else (I fail to run the requested process) # return (0, suitable return code) # where return code is 1 if cmdline is null or begins with "NONE" (for # an unimplemented command) # or the return value of the system subroutine. # Split command line into one word per element, separating words by # one (OR MORE) spaces: # The purpose of this is to identify latexmk-defined pseudocommands # 'start' and 'NONE'. # After dealing with them, the command line is reassembled my $cmd_line = $_[0]; if ( $cmd_line eq '' ) { traceback( "$My_name: Bug OR configuration error\n". " In run of'$rule', attempt to run a null program" ); return (0, 1); } if ( $cmd_line =~ /^start +/ ) { #warn "Before: '$cmd_line'\n"; # Run detached. How to do this depends on the OS # But first remove extra starts (which may have been inserted # to force a command to be run detached, when the command # already contained a "start"). while ( $cmd_line =~ s/^start +// ) {} #warn "After: '$cmd_line'\n"; return &Run_Detached( $cmd_line ); } elsif ( $cmd_line =~ /^NONE/ ) { warn "$My_name: ", "Program not implemented for this version. Command line:\n"; warn " '$cmd_line'\n"; return (0, 1); } else { # The command is given to system as a single argument, to force shell # metacharacters to be interpreted: return( 0, system( $cmd_line ) ); } } #************************************************************ sub Run_Detached { # Usage: Run_Detached ("program arguments "); # Runs program detached. Returns 0 on success, 1 on failure. # Under UNIX use a trick to avoid the program being killed when the # parent process, i.e., me, gets a ctrl/C, which is undesirable for pvc # mode. (The simplest method, system ("program arguments &"), makes the # child process respond to the ctrl/C.) # Return value is a list (pid, exitcode): # If process is spawned sucessfully, and I know the PID, # return (pid, 0), # else if process is spawned sucessfully, but I do not know the PID, # return (0, 0), # else if I fail to spawn a process # return (0, 1) my $cmd_line = $_[0]; ## warn "Running '$cmd_line' detached...\n"; if ( $cmd_line =~ /^NONE / ) { warn "$My_name: ", "Program not implemented for this version. Command line:\n"; warn " '$cmd_line'\n"; return (0, 1); } if ( "$^O" eq "MSWin32" ){ # Win95, WinNT, etc: Use MS's start command: # Need extra double quotes to deal with quoted filenames: # MSWin start takes first quoted argument to be a Window title. return( 0, system( "start \"\" $cmd_line" ) ); } else { # Assume anything else is UNIX or clone # For this purpose cygwin behaves like UNIX. ## warn "Run_Detached.UNIX: A\n"; my $pid = fork(); ## warn "Run_Detached.UNIX: B pid=$pid\n"; if ( ! defined $pid ) { ## warn "Run_Detached.UNIX: C\n"; warn "$My_name: Could not fork to run the following command:\n"; warn " '$cmd_line'\n"; return (0, 1); } elsif( $pid == 0 ){ ## warn "Run_Detached.UNIX: D\n"; # Forked child process arrives here # Insulate child process from interruption by ctrl/C to kill parent: # setpgrp(0,0); # Perhaps this works if setpgrp doesn't exist # (and therefore gives fatal error): eval{ setpgrp(0,0);}; exec( $cmd_line ); # Exec never returns; it replaces current process by new process die "$My_name forked process: could not run the command\n", " '$cmd_line'\n"; } ##warn "Run_Detached.UNIX: E\n"; # Original process arrives here return ($pid, 0); } # NEVER GET HERE. ##warn "Run_Detached.UNIX: F\n"; } #************************************************************ sub find_process_id { # find_process_id(string) finds id of process containing string and # being run by the present user. Typically the string will be the # name of the process or part of its command line. # On success, this subroutine returns the process ID. # On failure, it returns 0. # This subroutine only works on UNIX systems at the moment. if ( $pid_position < 0 ) { # I cannot do a ps on this system return (0); } my $looking_for = $_[0]; my @ps_output = `$pscmd`; # There may be multiple processes. Find only latest, # almost surely the one with the highest process number # This will deal with cases like xdvi where a script is used to # run the viewer and both the script and the actual viewer binary # have running processes. my @found = (); shift(@ps_output); # Discard the header line from ps foreach (@ps_output) { next unless ( /$looking_for/ ) ; my @ps_line = split (' '); # OLD return($ps_line[$pid_position]); push @found, $ps_line[$pid_position]; } if ($#found < 0) { # No luck in finding the specified process. return(0); } @found = reverse sort @found; if ($diagnostics) { print "Found the following processes concerning '$looking_for'\n", " @found\n", " I will use $found[0]\n"; } return $found[0]; } #************************************************************ #************************************************************ #************************************************************ # Directory stack routines sub pushd { push @dir_stack, cwd(); if ( $#_ > -1) { chdir $_[0]; } } #************************************************************ sub popd { if ($#dir_stack > -1 ) { chdir pop @dir_stack; } } #************************************************************ sub ifcd_popd { if ( $do_cd ) { warn "$My_name: Undoing directory change\n"; &popd; } } #************************************************************ sub finish_dir_stack { while ($#dir_stack > -1 ) { &popd; } } #************************************************************ #************************************************************ # Break handling routines (for wait-loop in preview continuous) sub end_wait { # Handler for break: Set global variable $have_break to 1. # Some systems (e.g., MSWin reset) appear to reset the handler. # So I'll re-enable it &catch_break; $have_break = 1; } #======================== sub catch_break { # Capture ctrl/C and ctrl/break. # $SIG{INT} corresponds to ctrl/C on LINUX/?UNIX and MSWin # $SIG{BREAK} corresponds to ctrl/break on MSWin, doesn't exist on LINUX $SIG{INT} = \&end_wait; if ( exists $SIG{BREAK} ) { $SIG{BREAK} = \&end_wait; } } #======================== sub default_break { # Arrange for ctrl/C and ctrl/break to give default behavior $SIG{INT} = 'DEFAULT'; if ( exists $SIG{BREAK} ) { $SIG{BREAK} = 'DEFAULT'; } } #************************************************************ #************************************************************