% $Id: texlive-en.tex 26703 2012-05-28 22:30:17Z karl $ % TeX Live documentation. Originally written by Sebastian Rahtz and % Michel Goossens, now maintained by Karl Berry and others. % Public domain. % \documentclass{article} \let\tldocenglish=1 % for live4ht.cfg \usepackage{tex-live} \usepackage[latin1]{inputenc} % translators: use your preferred encodings. \usepackage[T1]{fontenc} \begin{document} \title{% {\huge \textit{The \TeX\ Live Guide}\\\smallskip}% {\LARGE \textsf{\TL{} 2012}}% } \author{Karl Berry, editor \\[3mm] \url{http://tug.org/texlive/} } \date{June 2012} \maketitle \begin{multicols}{2} \tableofcontents %\listoftables \end{multicols} \section{Introduction} \label{sec:intro} \subsection{\TeX\ Live and the \TeX\ Collection} This document describes the main features of the \TL{} software distribution\Dash \TeX{} and related programs for \GNU/Linux and other Unix flavors, \MacOSX, and Windows systems. You may have acquired \TL{} by downloading, or on the \TK{} \DVD, which \TeX{} user groups distribute among their members, or in other ways. Section \ref{sec:tl-coll-dists} briefly describes the contents of the \DVD. Both \TL{} and the \TK{} are cooperative efforts by the \TeX{} user groups. This document mainly describes \TL{} itself. \TL{} includes executables for \TeX{}, \LaTeXe{}, \ConTeXt, \MF, \MP, \BibTeX{} and many other programs; an extensive collection of macros, fonts and documentation; and support for typesetting in many different scripts from around the world. For a brief summary of the major changes in this edition of \TL{}, see the end of the document, section~\ref{sec:history} (\p.\pageref{sec:history}). \htmlanchor{platforms} \subsection{Operating system support} \label{sec:os-support} \TL{} contains binaries for many Unix-based platforms, including \GNU/Linux, \MacOSX, and Cygwin. The included sources can be compiled on platforms for which we do not provide binaries. As to Windows: Windows \acro{XP} and later are supported. Windows~2000 will probably still mostly work. There are no special 64-bit executables for Windows, but the 32-bit executables should run on 64-bit systems. See section~\ref{sec:tl-coll-dists} for alternate solutions for Windows and \MacOSX. \subsection{Basic installation of \protect\TL{}} \label{sec:basic} You can install \TL{} either from \DVD{} or over the Internet (\url{http://tug.org/texlive/acquire.html}). The net installer itself is small, and downloads everything requested from the Internet. The \DVD{} installer lets you install to a local disk. You cannot run \TL{} directly from the \TK{} \DVD{} (or its \code{.iso} image), but you can prepare a runnable installation on, e.g., a \USB{} stick (see section~\ref{sec:portable-tl}). Installation is described in later sections (\p.\pageref{sec:install}), but here is a quick start: \begin{itemize*} \item The installation script is named \filename{install-tl}. It can operate in a ``wizard mode'' given the option \code{-gui=wizard} (default for Windows), a text mode given \code{-gui=text} (default for everything else), and an expert \GUI{} mode given \code{-gui=perltk}. \item One of the installed items is the `\TL\ Manager' program, named \prog{tlmgr}. Like the installer, it can be used in both \GUI{} mode and in text mode. You can use it to install and uninstall packages and do various configuration tasks. \end{itemize*} \htmlanchor{security} \subsection{Security considerations} \label{sec:security} To the best of our knowledge, the core \TeX\ programs themselves are (and always have been) extremely robust. However, the contributed programs in \TeX\ Live may not reach the same level, despite everyone's best efforts. As always, you should be careful when running programs on untrusted input; for maximum safety, use a new subdirectory. This need for care is especially urgent on Windows, since in general Windows finds programs in the current directory before anything else, regardless of the search path. This opens up a wide variety of possible attacks. We have closed many holes, but undoubtedly some remain, especially with third-party programs. Thus, we recommend checking for suspicious files in the current directory, especially executables (binaries or scripts). Ordinarily they should not be present, and definitely should not normally be created by merely processing a document. Finally, \TeX\ (and its companion programs) are able to write files when processing documents, a feature that can also be abused in a wide variety of ways. Again, processing unknown documents in a new subdirectory is the safest bet. \subsection{Getting help} \label{sec:help} The \TeX{} community is active and friendly, and most serious questions end up getting answered. However, the support is informal, done by volunteers and casual readers, so it's especially important that you do your homework before asking. (If you prefer guaranteed commercial support, you can forgo \TL{} completely and purchase a vendor's system; \url{http://tug.org/interest.html#vendors} has a list.) Here is a list of resources, approximately in the order we recommend using them: \begin{description} \item [Getting Started] If you are new to \TeX, the web page \url{http://tug.org/begin.html} gives a brief introduction to the system. \item [\TeX{} \acro{FAQ}] The \TeX{} \acro{FAQ} is a huge compendium of answers to all sorts of questions, from the most basic to the most arcane. It is included on \TL{} in \OnCD{texmf-dist/doc/generic/FAQ-en/html/index.html}, and is available on the Internet through \url{http://www.tex.ac.uk/faq}. Please check here first. \item [\TeX{} Catalogue] If you are looking for a specific package, font, program, etc., the \TeX{} Catalogue is the place to look. It is a huge collection of all \TeX{}-related items. See \url{http://mirror.ctan.org/help/Catalogue/}. \item [\TeX{} Web Resources] The web page \url{http://tug.org/interest.html} has many \TeX{}-related links, in particular for numerous books, manuals, and articles on all aspects of the system. \item [support archives] The two principal support forums are the Usenet newsgroup \url{news:comp.text.tex} and the mailing list \email{texhax@tug.org}. Their archives have years of past questions and answers for your searching pleasure, via \url{http://groups.google.com/group/comp.text.tex/topics} and \url{http://tug.org/mail-archives/texhax}, respectively. And a general web search, for example on \url{http://google.com}, never hurts. \item [asking questions] If you cannot find an answer, you can post to \dirname{comp.text.tex} through Google or your newsreader, or to \email{texhax@tug.org} through email. But before you post, \emph{please} read this \acro{FAQ} entry, to maximize your chances of getting a useful answer: \url{http://www.tex.ac.uk/cgi-bin/texfaq2html?label=askquestion}. Also worth mentioning are the \LaTeX{} Community site at \url{http://www.latex-community.org/} and its forum \url{http://www.latex-community.org/forum/}, and \TeX\ StackExchange at \url{http://tex.stackexchange.com/}. \item [\TL{} support] If you want to report a bug or have suggestions or comments on the \TL{} distribution, installation, or documentation, the mailing list is \email{tex-live@tug.org}. However, if your question is about how to use a particular program included in \TL{}, please write to that program's maintainer or mailing list. Often running a program with the \code{-{}-help} option will provide a bug reporting address. \end{description} The other side of the coin is helping others who have questions. Both \dirname{comp.text.tex} and \code{texhax} are open to anyone, so feel free to join, start reading, and help out where you can. % don't use \TL so the \uppercase in the headline works. Also so % tex4ht ends up with the right TeX. Likewise the \protect's. \section{Overview of \protect\TeX\protect\ Live} \label{sec:overview-tl} This section describes the contents of \TL{} and the \TK{} of which it is a part. \subsection{The \protect\TeX\protect\ Collection: \TL, pro\TeX{}t, Mac\TeX} \label{sec:tl-coll-dists} The \TK{} \DVD{} comprises the following: \begin{description} \item [\TL] A complete \TeX{} system to be installed to disk. Its home page is \url{http://tug.org/texlive/}. \item [Mac\TeX] for \MacOSX, this adds a native \MacOSX\ installer and other Mac applications to \TL{}. Its home page is \url{http://tug.org/mactex/}. \item [pro\TeX{}t] An enhancement of the \MIKTEX\ distribution for Windows, \ProTeXt\ adds a few extra tools to \MIKTEX, and simplifies installation. It is entirely independent of \TL{}, and has its own installation instructions. The \ProTeXt\ home page is \url{http://tug.org/protext}. \item [CTAN] A snapshot of the \CTAN{} repository (\url{http://www.ctan.org}). \item [\texttt{texmf-extra}] A directory with assorted additional packages. \end{description} \CTAN{}, \pkgname{protext}, and \dirname{texmf-extra} do not necessarily follow the same copying conditions as \TL{}, so be careful when redistributing or modifying. \subsection{Top level \TL{} directories} \label{sec:tld} Here is a brief listing and description of the top level directories in a \TL{} installation. \begin{ttdescription} \item[bin] The \TeX{} system programs, arranged by platform. % \item[readme-*.dir] Quick overview and useful links for \TL{}, in various languages, in both \HTML{} and plain text. % \item[source] The source to all included programs, including the main \Webc{}-based \TeX{} distributions. % \item[texmf] See \dirname{TEXMFMAIN} below. % \item[texmf-dist] See \dirname{TEXMFDIST} below. % \item[tlpkg] Scripts, programs and data for managing the installation, and special support for Windows. \end{ttdescription} In addition to the directories above, the installation scripts and \filename{README} files (in various languages) are at the top level of the distribution. For documentation, the comprehensive links in the top-level file \OnCD{doc.html} may be helpful. The documentation for the programs (manuals, man pages, Info files) is in \dirname{texmf/doc}. The documentation for \TeX\ packages and formats is in \dirname{texmf-dist/doc}. You can use the \cmdname{texdoc} program to find any documentation wherever it is located. This \TL\ documentation itself is in \dirname{texmf/doc/texlive}, available in several languages: \begin{itemize*} \item{Czech/Slovak:} \OnCD{texmf/doc/texlive/texlive-cz} \item{German:} \OnCD{texmf/doc/texlive/texlive-de} \item{English:} \OnCD{texmf/doc/texlive/texlive-en} \item{French:} \OnCD{texmf/doc/texlive/texlive-fr} \item{Italian:} \OnCD{texmf/doc/texlive/texlive-it} \item{Polish:} \OnCD{texmf/doc/texlive/texlive-pl} \item{Russian:} \OnCD{texmf/doc/texlive/texlive-ru} \item{Serbian:} \OnCD{texmf/doc/texlive/texlive-sr} \item{Simplified Chinese:} \OnCD{texmf/doc/texlive/texlive-zh-cn} \end{itemize*} \subsection{Overview of the predefined texmf trees} \label{sec:texmftrees} This section lists the predefined variables specifying the texmf trees used by the system, and their intended purpose, and the default layout of \TL{}. The command \texttt{tlmgr~conf} shows the values of these variables, so that you can easily find out how they map to particular directories in your installation. All of the trees, including the personal ones, should follow the \TeX\ Directory Structure (\TDS, \url{http://tug.org/tds}), with all its myriad subdirectories, or files may not be found. Section \ref{sec:local-personal-macros} (\p.\pageref{sec:local-personal-macros}) describes this in more detail. \begin{ttdescription} \item [TEXMFMAIN] The tree which holds vital parts of the system such as configuration files, helper scripts, and program documentation. \item [TEXMFDIST] The tree which holds the main set of macro packages, fonts, etc. \item [TEXMFLOCAL] The tree which administrators can use for system-wide installation of additional or updated macros, fonts, etc. \item [TEXMFHOME] The tree which users can use for their own individual installations of additional or updated macros, fonts, etc. The expansion of this variable dynamically adjusts for each user to their own individual directory. \item [TEXMFCONFIG] The (personal) tree used by the utilities \verb+texconfig+, \verb+updmap+, and \verb+fmtutil+ to store modified configuration data. \item [TEXMFSYSCONFIG] The (site-wide) tree used by the utilities \verb+texconfig-sys+, \verb+updmap-sys+, and \verb+fmtutil-sys+ to store modified configuration data. \item [TEXMFVAR] The (personal) tree used by \verb+texconfig+, \verb+updmap+ and \verb+fmtutil+ to store (cached) runtime data such as format files and generated map files. \item [TEXMFSYSVAR] The (site-wide) tree used by \verb+texconfig-sys+, \verb+updmap-sys+ and \verb+fmtutil-sys+, and also by \verb+tlmgr+, to store (cached) runtime data such as format files and generated map files. \item [TEXMFCACHE] The tree(s) used by \ConTeXt\ Mk\acro{IV} to store (cached) runtime data. \end{ttdescription} \noindent The default layout is: \begin{description} \item[system-wide root] can span multiple \TL{} releases: \begin{ttdescription} \item[2011] A previous release. \item[2012] The current release. \begin{ttdescription} \item [bin] ~ \begin{ttdescription} \item [i386-linux] \GNU/Linux binaries \item [...] \item [universal-darwin] \MacOSX\ binaries \item [win32] Windows binaries \end{ttdescription} \item [texmf\ \ \ \ \ \ \ ] This is \envname{TEXMFMAIN}. \item [texmf-dist\ \ ] \envname{TEXMFDIST} \item [texmf-var \ \ ] \envname{TEXMFSYSVAR} \item [texmf-config] \envname{TEXMFSYSCONFIG} \end{ttdescription} \item [texmf-local] \envname{TEXMFLOCAL}, intended to be retained from release to release. \end{ttdescription} \item[user's home] (\texttt{\$HOME} or \texttt{\%USERPROFILE\%}) \begin{ttdescription} \item[.texlive2011] Privately generated and configuration data for a previous release. \item[.texlive2012] Privately generated and configuration data for the current release. \begin{ttdescription} \item [texmf-var\ \ \ ] \envname{TEXMFVAR}, \envname{TEXMFCACHE} \item [texmf-config] \envname{TEXMFCONFIG} \end{ttdescription} \item[texmf] \envname{TEXMFHOME} Personal macros, etc. \end{ttdescription} \end{description} \subsection{Extensions to \protect\TeX} \label{sec:tex-extensions} Knuth's original \TeX{} itself is frozen, apart from rare bug fixes. It is still present in \TL\ as the program \prog{tex}, and will remain so for the foreseeable future. \TL{} contains several extended versions of \TeX: \begin{description} \item [\eTeX] adds a set of new primitives \label{text:etex} (related to macro expansion, character scanning, classes of marks, additional debugging features, and more) and the \TeXXeT{} extensions for bidirectional typesetting. In default mode, \eTeX{} is 100\% compatible with ordinary \TeX. See \OnCD{texmf-dist/doc/etex/base/etex_man.pdf}. \item [pdf\TeX] builds on the \eTeX\ extensions, adding support for writing \acro{PDF} output as well as \dvi{}, and many non-output-related extensions. This is the program invoked for most formats, e.g., \prog{etex}, \prog{latex}, \prog{pdflatex}. Its web site is \url{http://www.pdftex.org/}. See \OnCD{texmf-dist/doc/pdftex/manual/pdftex-a.pdf} for the manual, and \OnCD{texmf-dist/doc/pdftex/manual/samplepdf/samplepdf.tex} for example usage of some of its features. \item [Lua\TeX] is the designated successor of pdf\TeX, and is mostly (but not entirely) backward-compatible. It is also intended to be a functional superset of Aleph (see below), though technical compatibility is not intended. The incorporated Lua interpreter (\url{http://www.lua.org/}) enables elegant solutions for many thorny \TeX{} problems. When called as \filename{texlua}, it functions as a standalone Lua interpreter, and is already used as such within \TL. Its web site is \url{http://www.luatex.org/}, and the reference manual is \OnCD{texmf-dist/doc/luatex/luatexref-t.pdf}. \item [\XeTeX] adds support for Unicode input and OpenType- and system fonts, implemented using standard third-party libraries. See \url{http://tug.org/xetex}. \item [\OMEGA\ (Omega)] is based on Unicode (16-bit characters), thus supports working with almost all the world's scripts simultaneously. It also supports so-called `\OMEGA{} Translation Processes' (\acro{OTP}s), for performing complex transformations on arbitrary input. Omega is no longer included in \TL{} as a separate program; only Aleph is provided: \item [Aleph] combines the \OMEGA\ and \eTeX\ extensions. See \OnCD{texmf-dist/doc/aleph/base}. \end{description} \subsection{Other notable programs in \protect\TL} Here are a few other commonly-used programs included in \TL{}: \begin{cmddescription} \item [bibtex, bibtex8] bibliography support. \item [makeindex, xindy] index support. \item [dvips] convert \dvi{} to \PS{}. \item [xdvi] \dvi{} previewer for the X Window System. \item [dvilj] \dvi{} drive for the HP LaserJet family. \item [dviconcat, dviselect] cut and paste pages from \dvi{} files. \item [dvipdfmx] convert \dvi{} to \acro{PDF}, an alternative approach to pdf\TeX\ (mentioned above). \item [psselect, psnup, \ldots] \PS{} utilities. \item [pdfjam, pdfjoin, \ldots] \acro{PDF} utilities. \item [texexec, texmfstart] Con\TeX{}t and \acro{PDF} processor. \item [tex4ht] \TeX{} to \acro{HTML} (and \acro{XML} and more) converter. \end{cmddescription} \subsection{Fonts in \protect\TL} \label{sec:tl-fonts} \TL{} comes with many high-quality scalable fonts. See \url{http://tug.org/fonts} and \OnCD{texmf-dist/doc/fonts/free-math-font-survey}. \htmlanchor{installation} \section{Installation} \label{sec:install} \subsection{Starting the installer} \label{sec:inst-start} To begin, get the \TK{} \DVD{} or download the \TL{} net installer, and locate the installer script: \filename{install-tl} for Unix, \filename{install-tl.bat} for Windows. See \url{http://tug.org/texlive/acquire.html} for more information and other methods of getting the software. \begin{description} \item [Net installer:] Download from \CTAN, under \dirname{systems/texlive/tlnet}; the url \url{http://mirror.ctan.org/systems/texlive/tlnet} will automatically redirect to a nearby, up-to-date, mirror. You can retrieve either \filename{install-tl.zip} which can be used under Unix and Windows, or the considerably smaller \filename{install-unx.tar.gz} for Unix only. After unpacking, \filename{install-tl} and \filename{install-tl.bat} will be in the \dirname{install-tl} subdirectory. \item [\TeX{} Collection \DVD:] go to the \DVD's \dirname{texlive} subdirectory. Under Windows, the installer normally starts automatically when you insert the \DVD. You can get the \DVD\ by becoming a member of a \TeX\ user group (highly recommended, \url{http://tug.org/usergroups.html}), or purchasing it separately (\url{http://tug.org/store}), or burning your own from the \ISO\ image. You can also mount the \ISO\ directly on most systems. After installing from \DVD\ or \ISO, if you want to get continuing updates from the Internet, please see \ref{sec:dvd-install-net-updates}. \end{description} The same installer program is run, whatever the source. The most visible difference between the two is that with the net installer, what you end up with is the packages that are currently available. This is in contrast to the \DVD\ and \ISO\ images, which are not updated between the major public releases. \noindent The following sections explain installer start-up in more detail. \subsubsection{Unix} Below, \texttt{>} denotes the shell prompt; user input is \Ucom{\texttt{bold}}. The script \filename{install-tl} is a Perl script. The simplest way to start it on a Unix-compatible system is as follows: \begin{alltt} > \Ucom{cd /path/to/installer} > \Ucom{perl install-tl} \end{alltt} (Or you can invoke \Ucom{perl /path/to/installer/install-tl}, or \Ucom{./install-tl} if it stayed executable, etc.; we won't repeat all these variations.) You may have to enlarge your terminal window so that it shows the full text installer screen (Figure~\ref{fig:text-main}). To install in expert \GUI\ mode (figure~\ref{fig:gui-main}), you'll need the \dirname{Perl/TK} module compiled with \acro{XFT} support, which is generally the case with \GNU/Linux, but not necessarily with other systems. Given that, you can run: \begin{alltt} > \Ucom{perl install-tl -gui} \end{alltt} For a complete listing of the various options: \begin{alltt} > \Ucom{perl install-tl -help} \end{alltt} \textbf{Warning about Unix permissions:} Your \code{umask} at the time of installation will be respected by the \TL{} installer. Therefore, if you want your installation to be usable by users other than you, make sure your setting is sufficiently permissive, for instance, \code{umask 002}. For more information about \code{umask}, consult your system documentation. \textbf{Special considerations for Cygwin:} Unlike other Unix-compatible systems, Cygwin does not by default include all of the prerequisite programs needed by the \TL{} installer. See Section~\ref{sec:cygwin} for details. \subsubsection{MacOSX} As mentioned in section~\ref{sec:tl-coll-dists}, a separate distribution is prepared for \MacOSX, named Mac\TeX\ (\url{http://tug.org/mactex}). We recommend using the native Mac\TeX\ installer instead of the \TL\ installer on \MacOSX, because the native installer makes a few Mac-specific adjustments, in particular to allow easily switching between the various \TeX\ distributions for \MacOSX\ (Mac\TeX, Fink, MacPorts, \ldots). Mac\TeX\ is firmly based on \TL, and the main \TeX\ trees are precisely the same. It does add a few extra folders with Mac-specific documentation and applications. \subsubsection{Windows} If you are using the net installer, or the \DVD\ installer failed to start automatically, double-click \filename{install-tl.bat}. For more customization options, e.g., selection of specific package collections, run \filename{install-tl-advanced.bat} instead. You can also start the installer from the command-prompt. Below, \texttt{>} denotes the prompt; user input is \Ucom{\texttt{bold}}. If you are in the installer directory, run just: \begin{alltt} > \Ucom{install-tl} \end{alltt} Or you can invoke it with an absolute location, such as: \begin{alltt} > \Ucom{D:\bs{}texlive\bs{}install-tl} \end{alltt} for the \TK\ \DVD, supposing that \dirname{D:} is the optical drive. Figure~\ref{fig:wizard-w32} displays the wizard installer, which is the default for Windows. To install in text mode, use: \begin{alltt} > \Ucom{install-tl -no-gui} \end{alltt} For a complete listing of the various options: \begin{alltt} > \Ucom{install-tl -help} \end{alltt} \begin{figure}[tb] \begin{boxedverbatim} Installing TeX Live 2012 from: ... Platform: i386-linux => 'Intel x86 with GNU/Linux' Distribution: inst (compressed) ... Detected platform: Intel x86 with GNU/Linux platforms: 1 out of 19 installation scheme (scheme-full) 84 collections out of 85, disk space required: 3091 MB Customizing installation scheme: standard collections language collections directories: TEXDIR (the main TeX directory): /usr/local/texlive/2012 ... options: [ ] use letter size instead of A4 by default ... set up for portable installation Actions: start installation to hard disk help quit \end{boxedverbatim} \caption{Main text installer screen (\GNU/Linux)}\label{fig:text-main} \end{figure} \begin{figure}[tb] \tlpng{install-lnx-main}{\linewidth,trim=10 4 0 20,clip} \caption{Expert \GUI{} installer screen (\GNU/Linux)}\label{fig:gui-main} \end{figure} \begin{figure}[tb] \tlpng{wizard-w32}{\linewidth,trim=0 4 0 0,clip} \caption{Wizard installer screen (Windows)}\label{fig:wizard-w32} \end{figure} \htmlanchor{cygwin} \subsubsection{Cygwin} \label{sec:cygwin} The \TL{} installer supports only Cygwin 1.7. Before beginning the installation, use Cygwin's \filename{setup.exe} program to install the \filename{perl} and \filename{wget} packages if you have not already done so. The following additional packages are recommended: \begin{itemize*} \item \filename{fontconfig} [needed by \XeTeX] \item \filename{ghostscript} [needed by various utilities] \item \filename{libXaw7} [needed by \code{xdvi}] \item \filename{ncurses} [provides the \code{clear} command used by the installer] \end{itemize*} \subsubsection{The text installer} Figure~\ref{fig:text-main} displays the main text mode screen under Unix. The text installer is the default on Unix. This is only a command-line installer; there is no cursor support at all. For instance, you cannot tab around checkboxes or input fields. You just type something (case-sensitive) at the prompt and press the Enter key, and then the entire terminal screen will be rewritten, with adjusted content. The text installer interface is this primitive for a reason: it is designed to run on as many platforms as possible, even with a very barebones Perl. \subsubsection{The expert graphical installer} Figure~\ref{fig:gui-main} displays the expert graphical installer under \GNU/Linux. Other than using buttons and menus, this does not differ much from the text installer. This mode can be invoked explicitly with \begin{alltt} > \Ucom{install-tl -gui=perltk} \end{alltt} \subsubsection{The simple wizard installer} Under Windows, the default is to run the simplest installation method we could devise, called the ``wizard'' installer (figure~\ref{fig:wizard-w32}). It installs everything and asks almost no questions. If you want to customize your setup, you should run one of the other installers. This mode can be invoked explicitly with \begin{alltt} > \Ucom{install-tl -gui=wizard} \end{alltt} \subsection{Running the installer} \label{sec:runinstall} The installer is intended to be mostly self-explanatory, but following are a few notes about the various options and submenus. \subsubsection{Binary systems menu (Unix only)} \label{sec:binary} \begin{figure}[tb] \begin{boxedverbatim} Available platforms: =============================================================================== a [ ] alpha-linux DEC Alpha with GNU/Linux b [ ] amd64-freebsd x86_64 with FreeBSD c [ ] amd64-kfreebsd x86_64 with GNU/kFreeBSD d [ ] armel-linux ARM with GNU/Linux e [ ] i386-cygwin Intel x86 with Cygwin f [ ] i386-freebsd Intel x86 with FreeBSD g [ ] i386-kfreebsd Intel x86 with GNU/kFreeBSD h [X] i386-linux Intel x86 with GNU/Linux i [ ] i386-solaris Intel x86 with Solaris j [ ] mips-irix SGI IRIX k [ ] mipsel-linux mipsel with Linux l [ ] powerpc-aix PowerPC with AIX m [ ] powerpc-linux PowerPC with GNU/Linux o [ ] sparc-solaris Sparc with Solaris p [ ] universal-darwin universal binaries for MacOSX/Darwin s [ ] win32 Windows t [ ] x86_64-darwin x86_64 with MacOSX/Darwin u [ ] x86_64-linux x86_64 with GNU/Linux v [ ] x86_64-solaris x86_64 with Solaris \end{boxedverbatim} \caption{Binaries menu}\label{fig:bin-text} \end{figure} Figure~\ref{fig:bin-text} displays the text mode binaries menu. By default, only the binaries for your current platform will be installed. From this menu, you can select installation of binaries for other platforms as well. This can be useful if you are sharing a \TeX\ tree across a network of heterogenous machines, or for a dual-boot system. \subsubsection{Selecting what is to be installed} \label{sec:components} \begin{figure}[tbh] \begin{boxedverbatim} Select scheme: =============================================================================== a [X] full scheme (everything) b [ ] medium scheme (small + more packages and languages) c [ ] small scheme (basic + xetex, metapost, a few languages) d [ ] basic scheme (plain and latex) e [ ] minimal scheme (plain only) f [ ] ConTeXt scheme g [ ] GUST TeX Live scheme h [ ] teTeX scheme (more than medium, but nowhere near full) i [ ] XML scheme j [ ] custom selection of collections \end{boxedverbatim} \caption{Scheme menu}\label{fig:scheme-text} \end{figure} Figure~\ref{fig:scheme-text} displays the \TL\ scheme menu; from here, you choose a ``scheme'', which is an overall set of package collections. The default \optname{full} scheme installs everything available. This is recommended, but you can also choose the \optname{basic} scheme for a small system, \optname{minimal} for testing purposes, and \optname{medium} or \optname{teTeX} to get something in between. There are also various specialized and country-specific schemes. \begin{figure}[tb] \tlpng{stdcoll}{.7\linewidth,trim=0 4 0 0,clip} \caption{Collections menu}\label{fig:collections-gui} \end{figure} You can refine your scheme selection with the `standard collections' and `language collections' menus (figure~\ref{fig:collections-gui}, shown in \GUI\ mode for a change). Collections are one level more detailed than schemes\Dash in essence, a scheme consists of several collections, a collection consists of one or more packages, and a package (the lowest level grouping in \TL) contains the actual \TeX\ macro files, font files, and so on. If you want more control than the collection menus provide, you can use the \TeX\ Live Manager (\prog{tlmgr}) program after installation (see section~\ref{sec:tlmgr}); using that, you can control the installation at the package level. \subsubsection{Directories} \label{sec:directories} The default layout is described in section~\ref{sec:texmftrees}, \p.\pageref{sec:texmftrees}. The default location of \dirname{TEXDIR} is \dirname{/usr/local/texlive/2012} on Unix and |%SystemDrive%\texlive\2012| on Windows. The main reason to change this default is if you lack write permission for the default location. You don't have to be root or administrator to install \TL, but you do need write access to the target directory. A reasonable alternative choice is a directory under your home directory, especially if you will be the sole user. Use `|~|' to indicate this, as in `|~/texlive/2012|'. We recommend including the year in the name, to enable keeping different releases of \TL{} side by side. (You may wish to make a version-independent name such as \dirname{/usr/local/texlive-cur} via a symbolic link, which you can then update after testing the new release.) Changing \dirname{TEXDIR} in the installer will also change \dirname{TEXMFLOCAL}, \dirname{TEXMFSYSVAR} and \dirname{TEXMFSYSCONFIG}. \dirname{TEXMFHOME} is the recommended location for personal macro files or packages. The default value is |~/texmf|. In contrast to \dirname{TEXDIR}, here a |~| is preserved in the newly-written configuration files, since it usefully refers to the home directory of any individual running \TeX. It expands to \dirname{$HOME} on Unix and \verb|%USERPROFILE%| on Windows. Special redundant note: \envname{TEXMFHOME}, like all trees, must be organized according to the \TDS, or files may not be found. \dirname{TEXMFVAR} is the location for storing most cached runtime data specific to each user. \dirname{TEXMFCACHE} is used for that purpose by \ConTeXt\ Mk\acro{IV} (see section~\ref{sec:context-mkiv}, \p.\pageref{sec:context-mkiv}). \subsubsection{Options} \label{sec:options} \begin{figure}[tbh] \begin{boxedverbatim} Options setup: ===============================================================================

use letter size instead of A4 by default: [ ] execution of restricted list of programs: [X] create format files: [X] install font/macro doc tree: [X] install font/macro source tree: [X] create symlinks in standard directories: [ ] binaries to: manpages to: info to: after installation, get package updates from CTAN: [X] \end{boxedverbatim} \caption{Options menu (Unix)}\label{fig:options-text} \end{figure} Figure~\ref{fig:options-text} shows the text mode options menu. More info on each: \begin{description} \item[use letter size instead of A4 by default:] The default paper size selection. Of course, individual documents can and should specify a specific paper size, if desired. \item[execution of restricted list of programs:] As of \TL\ 2010, execution of a few external programs is allowed by default. The (very short) list of allowed programs is given in the \filename{texmf.cnf}. See the 2010 news (section~\ref{sec:2010news}) for more details. \item[create format files:] Although unnecessary format files take time to generate and disk space to store, it is still recommended to leave this option checked: if you don't, then format files will be generated in people's private \dirname{TEXMFVAR} tree as they are needed. In that location, they will not be updated automatically if (say) binaries or hyphenation patterns are updated in the installation, and thus you could end up with incompatible format files. \item[install font/macro \ldots\ tree:] These options allow you to omit downloading/installing the documentation and source files present in most packages. Not recommended. \item[create symlinks in standard directories:] This option (Unix only) bypasses the need to change environment variables. Without this option, \TL{} directories usually have to be added to \envname{PATH}, \envname{MANPATH} and \envname{INFOPATH}. You will need write permissions to the target directories. It is strongly advised \emph{not} to overwrite a \TeX\ system that came with your system with this option. It is intended primarily for accessing the \TeX\ system through directories that are already known to users, such as \dirname{/usr/local/bin}, which don't already contain any \TeX\ files. \item[after installation \ldots\ \CTAN:] When installing from \DVD, this option is enabled by default, since usually one wants to take any subsequent package updates from the \CTAN\ area that is updated throughout the year. The only likely reason to disable it is if you install only a subset from the \DVD\ and plan to augment the installation later. In any case, the package repository for the installer, and for updates after installation, can be set independently as needed; see section~\ref{sec:location} and section~\ref{sec:dvd-install-net-updates}. \end{description} When all the settings are to your liking, you can type `I' to start the installation process. When it is done, skip to section~\ref{sec:postinstall} to read what else needs to be done, if anything. \subsection{Command-line install-tl options} \label{sec:cmdline} Type \begin{alltt} > \Ucom{install-tl -help} \end{alltt} for a listing of command-line options. Either |-| or |--| can be used to introduce option names. These are the most common ones: \begin{ttdescription} \item[-gui] If possible, use the \GUI{} installer. This requires the Perl/Tk module (\url{http://tug.org/texlive/distro.html#perltk}) compiled with \acro{XFT} support; if Perl/Tk is not available, installation continues in text mode. \item[-no-gui] Force using the text mode installer, even under Windows. \item[-lang {\sl LL}] Specify the installer interface language as a standard (usually two-letter) code. The installer tries to automatically determine the right language but if it fails, or if the right language is not available, then it uses English as a fallback. Run \code{install-tl --help} to get the list of available languages. \htmlanchor{opt-in-place} \item[-in-place] If you already have an rsync, svn, or other copy of \TL{} (see \url{http://tug.org/texlive/acquire-mirror.html}) then this option will use what you've got, as-is, and do only the necessary post-install. Be warned that the file \filename{tlpkg/texlive.tlpdb} may be overwritten; saving it is your responsibility. Also, package removal has to be done manually. Do not use this unless you know what you are doing. This option cannot be toggled via the installer interface. \item[-portable] Install for portable use on, e.g., a \USB{} stick. Also selectable from within the text installer with the \code{V} command, and from the \GUI{} installer. See section~\ref{sec:portable-tl}. \item[-profile {\sl file}] Load the installation profile \var{file} and do the installation with no user interaction. The installer always writes a file \filename{texlive.profile} to the \dirname{tlpkg} subdirectory of your installation. That file can be given as the argument to redo the exact same installation on a different system, for example. Alternatively, you can use a custom profile, most easily created by starting from a generated one and changing values, or an empty file, which will take all the defaults. \item [-repository {\sl url-or-directory}] Specify package repository from which to install; see following. \end{ttdescription} \subsubsection{The \optname{-repository} option} \label{sec:location} The default network package repository is a \CTAN{} mirror chosen automatically via \url{http://mirror.ctan.org}. If you want to override that, the location value can be a url starting with \texttt{ftp:}, \texttt{http:}, or \texttt{file:/}, or a plain directory path. (When giving an \texttt{http:}\ or \texttt{ftp:}\ location, trailing `\texttt{/}' characters and/or a trailing `\texttt{/tlpkg}' component are ignored.) For example, you could choose a particular \CTAN\ mirror with something like: \url{http://ctan.example.org/tex-archive/systems/texlive/tlnet/}, substituting a real hostname and its particular top-level \CTAN\ path for |ctan.example.org/tex-archive|. The list of \CTAN\ mirrors is maintained at \url{http://ctan.org/mirrors}. If the given argument is local (either a path or a \texttt{file:/} url), compressed files in an \dirname{archive} subdirectory of the repository path are used (even if uncompressed files are available as well). \subsection{Post-install actions} \label{sec:postinstall} Some post-install may be required. \subsubsection{Environment variables for Unix} \label{sec:env} If you elected to create symlinks in standard directories (described in section~\ref{sec:options}), then there is no need to edit environment variables. Otherwise, on Unix systems, the directory of the binaries for your platform must be added to the search path. (On Windows, the installer takes care of this.) Each supported platform has its own subdirectory under \dirname{TEXDIR/bin}. See figure~\ref{fig:bin-text} for the list of subdirectories and corresponding platforms. Optionally, you can also add the documentation man and Info directories to their respective search paths, if you want the system tools to find them. The man pages might be found automatically after the addition to \envname{PATH}. For Bourne-compatible shells such as \prog{bash}, and using Intel x86 GNU/Linux and a default directory setup as an example, the file to edit might be \filename{$HOME/.profile} (or another file sourced by \filename{.profile}, and the lines to add would look like this: \begin{sverbatim} PATH=/usr/local/texlive/2012/bin/i386-linux:$PATH; export PATH MANPATH=/usr/local/texlive/2012/texmf/doc/man:$MANPATH; export MANPATH INFOPATH=/usr/local/texlive/2012/texmf/doc/info:$INFOPATH; export INFOPATH \end{sverbatim} For csh or tcsh, the file to edit is typically \filename{$HOME/.cshrc}, and the lines to add might look like: \begin{sverbatim} setenv PATH /usr/local/texlive/2012/bin/i386-linux:$PATH setenv MANPATH /usr/local/texlive/2012/texmf/doc/man:$MANPATH setenv INFOPATH /usr/local/texlive/2012/texmf/doc/info:$INFOPATH \end{sverbatim} If you already have settings somewhere in your ``dot'' files, naturally the \TL\ directories should simply be merged in as appropriate. \subsubsection{Environment variables: Global configuration} \label{sec:envglobal} If you want to make these changes globally, or for a user newly added to the system, then you are on your own; there is just too much variation between systems in how and where these things are configured. Our two hints are: 1)~you may want to check for a file \filename{/etc/manpath.config} and, if present, add lines such as \begin{sverbatim} MANPATH_MAP /usr/local/texlive/2012/bin/i386-linux \ /usr/local/texlive/2012/texmf/doc/man \end{sverbatim} And 2)~check for a file \filename{/etc/environment} which may define the search path and other default environment variables. In each (Unix) binary directory, we also create a symbolic link named \code{man} to the directory \dirname{texmf/doc/man}. Some \code{man} programs, such as the standard \MacOSX\ \code{man}, will automatically find that, obviating the need for any man page setup. \subsubsection{Internet updates after \DVD\ installation} \label{sec:dvd-install-net-updates} If you installed \TL\ from \DVD\ and then wish to get updates from the Internet, you need to run this command---\emph{after} you've updated your search path (as described in the previous section): \begin{alltt} > \Ucom{tlmgr option repository http://mirror.ctan.org/systems/texlive/tlnet} \end{alltt} This tells \cmdname{tlmgr} to use a nearby \CTAN\ mirror for future updates. This is done by default when installing from \DVD, via the option described in section~\ref{sec:options}. If there are problems with the automatic mirror selection, you can specify a particular \CTAN\ mirror from the list at \url{http://ctan.org/mirrors}. Use the exact path to the \dirname{tlnet} subdir on that mirror, as shown above. \htmlanchor{xetexfontconfig} % keep historical anchor working \htmlanchor{sysfontconfig} \subsubsection{System font configuration for \XeTeX\ and Lua\TeX} \label{sec:font-conf-sys} \XeTeX\ and Lua\TeX\ can use any font installed on the system, not just those in the \TeX\ trees. They do these via related but not identical methods. On Windows, fonts shipped with \TL\ are made available to \XeTeX\ automatically. But if you have installed the \filename{xetex} package on a Unix-compatible system, you need to configure your system to be able to find the fonts shipped with \TL\ via system name lookup, and not just filename lookup. To facilitate this, when the \pkgname{xetex} package is installed (either at initial installation or later), the necessary configuration file is created in \filename{TEXMFSYSVAR/fonts/conf/texlive-fontconfig.conf}. To set up the \TL{} fonts for system-wide use (assuming you have suitable privileges), proceed as follows: \begin{enumerate*} \item Copy the \filename{texlive-fontconfig.conf} file to \dirname{/etc/fonts/conf.d/09-texlive.conf}. \item Run \Ucom{fc-cache -fsv}. \end{enumerate*} If you do not have sufficient privileges to carry out the steps above, or if you simply want to make the \TL{} fonts available to one user, you can do the following: \begin{enumerate*} \item Copy the \filename{texlive-fontconfig.conf} file to \filename{~/.fonts.conf}, where \filename{~} is your home directory. \item Run \Ucom{fc-cache -fv}. \end{enumerate*} You can run \code{fc-list} to see the names of the system fonts. The incantation \code{fc-list : family style file spacing} (all arguments are literal strings) shows generally interesting information. \subsubsection{\ConTeXt{} Mark IV} \label{sec:context-mkiv} Both the `old' \ConTeXt{} (Mark \acro{II}) and the `new' \ConTeXt{} (Mark \acro{IV}) should run out of the box after \TL{} installation, and should need no special attention as long as you stick to using \verb+tlmgr+ for updates. However, because \ConTeXt{} Mk\acro{IV} does not use the kpathsea library, some setup will be required whenever you install new files manually (without using \verb+tlmgr+). After each such installation, each Mk\acro{IV} user must run: \begin{sverbatim} context --generate \end{sverbatim} to refresh the \ConTeXt{} disk cache data. The resulting files are stored under \code{TEXMFCACHE}. whose default value in \TL\ is \verb+TEXMSYSVAR;TEXMFVAR+. \ConTeXt\ Mk\acro{IV} will read from all paths mentioned in \verb+TEXMFCACHE+, and write to the first path that is writable. While reading, the last found match will take precedence in the case of duplicated cache data. For more information, see \url{http://wiki.contextgarden.net/Running_Mark_IV}. \subsubsection{Integrating local and personal macros} \label{sec:local-personal-macros} This is already mentioned implicitly in section~\ref{sec:texmftrees}: \dirname{TEXMFLOCAL} (by default, \dirname{/usr/local/texlive/texmf-local} or \verb|%SystemDrive%\texlive\texmf-local| on Windows) is intended for system-wide local fonts and macros; and \dirname{TEXMFHOME} (by default, \dirname{$HOME/texmf} or \verb|%USERPROFILE%\texmf|), is for personal fonts and macros. These directories are intended to stick around from release to release, and have their content seen automatically by a new \TL{} release. Therefore, it is best to refrain from changing the definition of \dirname{TEXMFLOCAL} to be too far away from the main \TL{} directory, or you will need to manually change future releases. For both trees, files should be placed in their proper \TeX\ Directory Structure (\TDS) subdirectories; see \url{http://tug.org/tds} or consult \filename{texmf/web2c/texmf.cnf}. For instance, a \LaTeX{} class file or package should be placed in \dirname{TEXMFLOCAL/tex/latex} or \dirname{TEXMFHOME/tex/latex}, or a subdirectory thereof. \dirname{TEXMFLOCAL} requires an up-to-date filename database, or files will not be found. You can update it with the command \cmdname{mktexlsr} or use the `Reinit file database' button on the configuration tab of the \TeX\ Live Manager \GUI. By default, each of these variables is defined to be a single directory, as shown. This is not a hard-and-fast requirement. If you need to easily switch back and forth between different versions of large packages, for example, you can maintain multiple trees for your own purposes. This is done by setting \dirname{TEXMFHOME} to the list of directories, within braces, separated by commas: \begin{verbatim} TEXMFHOME = {/my/dir1,/mydir2,/a/third/dir} \end{verbatim} Section~\ref{sec:brace-expansion} describes brace expansion further. \subsubsection{Integrating third-party fonts} This is unfortunately a messy topic. Forget about it unless you want to delve into many details of the \TeX{} installation. Don't forget to check first what you get for free: see section~\ref{sec:tl-fonts}. A possible alternative is to use \XeTeX\ or Lua\TeX\ (see section~\ref{sec:tex-extensions}), which let you use operating system fonts without any installation in \TeX. If you do need to do this, see \url{http://tug.org/fonts/fontinstall.html} for our best effort at describing the procedure. If you rigorously maintain your local font maps, \texttt{tlmgr generate updmap} \textit{may} be useful, notably in moving from release to release; see the \cmdname{tlmgr} documentation. \subsection{Testing the installation} \label{sec:test-install} After installing \TL{} as best you can, you naturally want to test it out, so you can start creating beautiful documents and\slash or fonts. This section gives some basic procedures for testing that the new system is functional. We give Unix commands here; under \MacOSX{} and Windows, you're more likely to run the tests through a graphical interface, but the principles are the same. \begin{enumerate} \item Make sure that you can run the \cmdname{tex} program in the first place: \begin{alltt} > \Ucom{tex -{}-version} TeX 3.1415926 (TeX Live ...) kpathsea version 6.0.1 Copyright ... D.E. Knuth. ... \end{alltt} If this comes back with `command not found' instead of version and copyright information, or with an older version, most likely you don't have the correct \dirname{bin} subdirectory in your \envname{PATH}. See the environment-setting information on \p.\pageref{sec:env}. \item Process a basic \LaTeX{} file: \begin{alltt} > \Ucom{latex sample2e.tex} pdfTeX 3.1415926-... (TeX Live ...) ... Output written on sample2e.dvi (3 pages, 7484 bytes). Transcript written on sample2e.log. \end{alltt} If this fails to find \filename{sample2e.tex} or other files, most likely you have interference from old environment variables or configuration files; we recommend unsetting all \TeX-related environment variables for a start. (For a deep analysis, you can ask \TeX{} to report on exactly what it is searching for, and finding; see ``Debugging actions'' on page~\pageref{sec:debugging}.) \item Preview the result online: \begin{alltt} > \Ucom{xdvi sample2e.dvi} # Unix > \Ucom{dviout sample2e.dvi} # Windows \end{alltt} You should see a new window with a nice document explaining some of the basics of \LaTeX{}. (Well worth reading, by the way, if you're new to \TeX.) You do have to be running under X for \cmdname{xdvi} to work; if you're not, or your \envname{DISPLAY} environment variable is set incorrectly, you'll get an error \samp{Can't open display}. \item Create a \PS{} file for printing or display: \begin{alltt} > \Ucom{dvips sample2e.dvi -o sample2e.ps} \end{alltt} \item Create a \acro{PDF} file instead of \dvi{}; this processes the \filename{.tex} file and writes \acro{PDF} directly: \begin{alltt} > \Ucom{pdflatex sample2e.tex} \end{alltt} \item Preview the \acro{PDF} file: \begin{alltt} > \Ucom{gv sample2e.pdf} \textrm{or:} > \Ucom{xpdf sample2e.pdf} \end{alltt} Neither \cmdname{gv} nor \cmdname{xpdf} are included in \TL{}, so you must install them separately. See \url{http://www.gnu.org/software/gv} and \url{http://www.foolabs.com/xpdf}, respectively. There are plenty of other \acro{PDF} viewers, too. For Windows, we recommend trying Sumatra PDF (\url{http://blog.kowalczyk.info/software/sumatrapdf}). \item Standard test files you may find useful in addition to \filename{sample2e.tex}: \begin{ttdescription} \item [small2e.tex] A simpler document than \filename{sample2e}, to reduce the input size if you're having troubles. \item [testpage.tex] Test if your printer introduces any offsets. \item [nfssfont.tex] For printing font tables and tests. \item [testfont.tex] Also for font tables, but using plain \TeX{}. \item [story.tex] The most canonical (plain) \TeX{} test file of all. You must type \samp{\bs bye} to the \code{*} prompt after \samp{tex story.tex}. \end{ttdescription} \item If you have installed the \filename{xetex} package, you can test its access to system fonts as follows: \begin{alltt} > \Ucom{xetex opentype-info.tex} This is XeTeX, Version 3.1415926\dots ... Output written on opentype-info.pdf (1 page). Transcript written on opentype-info.log. \end{alltt} (Or the same for \filename{luatex}.) If you get an error message saying ``Invalid fontname `Latin Modern Roman/ICU'\dots'', then you need to configure your system so that \XeTeX{} can find the fonts shipped with \TL. See Section~\ref{sec:font-conf-sys}. \end{enumerate} \subsection{Links for additional downloadable software} If you are new to \TeX{}, or otherwise need help with actually writing \TeX{} or \LaTeX{} documents, please visit \url{http://tug.org/begin.html} for some introductory resources. Links for some other tools you may consider installing: \begin{description} \item[Ghostscript] \url{http://www.cs.wisc.edu/~ghost/} \item[Perl] \url{http://www.perl.org/} with supplementary packages from \acro{CPAN}, \url{http://www.cpan.org/} \item[ImageMagick] \url{http://www.imagemagick.com}, for graphics processing and conversion \item[NetPBM] \url{http://netpbm.sourceforge.net/}, also for graphics. \item[\TeX-oriented editors] There is a wide choice, and it is a matter of the user's taste. Here is a selection in alphabetical order (a few here are for Windows only). \begin{itemize*} \item \cmdname{GNU Emacs} is available natively under Windows, see \url{http://www.gnu.org/software/emacs/windows/ntemacs.html}. \item \cmdname{Emacs with Auc\TeX} for Windows is available from \CTAN. The AuC\TeX\ home page is \url{http://www.gnu.org/software/auctex}. \item \cmdname{LEd} is available from \url{http://mirror.ctan.org/support/LEd}. \item \cmdname{SciTE} is available from \url{http://www.scintilla.org/SciTE.html}. \item \cmdname{Texmaker} is free software, available from \url{http://www.xm1math.net/texmaker}. \item \cmdname{TexMakerX} is a fork of \cmdname{Texmaker} with additional features; \url{http://texmakerx.sourceforge.net}. \item \cmdname{TeXnicCenter} is free software, available from \url{http://www.texniccenter.org} and in the pro\TeX{}t distribution. \item \cmdname{TeXworks} is free software, available from \url{http://tug.org/texworks} and installed for Windows and \MacOSX\ as part of \TL. \item \cmdname{Vim} is free software, available from \url{http://www.vim.org}. \item \cmdname{WinEdt} is shareware available though \url{http://tug.org/winedt} or \url{http://www.winedt.com}. \item \cmdname{WinShell} is available from \url{http://www.winshell.de}. \end{itemize*} \end{description} For a much longer list of packages and programs, see \url{http://tug.org/interest.html}. \section{Specialized installations} The previous sections described the basic installation process. Here we turn to some specialized cases. \htmlanchor{tlsharedinstall} \subsection{Shared-user (or cross-machine) installations} \label{sec:sharedinstall} \TL{} has been designed to be sharable between different users on one system, and/or between different systems on a network. With a standard directory layout, no hard paths are configured: the locations for files needed by \TL{} programs are found relative to the programs. You can see this in the principal configuration file \filename{$TEXMFMAIN/web2c/texmf.cnf}, which contains lines such as \begin{sverbatim} TEXMFMAIN = $SELFAUTOPARENT/texmf ... TEXMFLOCAL = $SELFAUTOPARENT/../texmf-local \end{sverbatim} This means that adding the directory for \TL{} executables for their platform to their search path is sufficient to get a working setup. By the same token, you can also install \TL{} locally and then move the entire hierarchy afterwards to a network location. For Windows, a sample network installation script named \filename{w32client} can be downloaded through \url{http://tug.org/texlive/w32client.html}. It creates settings and menu shortcuts for using an existing \TL{} installation on a \acro{LAN}. It also registers an uninstaller \filename{w32unclient}, available in the same zip file. See the web page for more information. \htmlanchor{tlportable} \subsection{Portable (\USB{}) installations} \label{sec:portable-tl} The \code{-portable} installer option (or \code{V} command in the text installer or corresponding \GUI{} option) creates a completely self-contained \TL{} installation under a common root and forgoes system integration. You can create such an installation directly on a \USB{} stick, or copy it to a \USB{} stick afterwards. To run \TeX\ using this portable installation, you need to add the appropriate binary directory to the search path during your terminal session, as usual. On Windows, you can double-click \filename{tl-tray-menu} at the root of the installation to choose between a few common tasks, as shown in this screenshot: \medskip \tlpng{tray-menu}{4cm} \smallskip \noindent The `More\ldots' entry explains how you can customize this menu. \htmlanchor{tlisoinstall} \subsection{\ISO\ (or \DVD) installations} \label{sec:isoinstall} If you don't need to update or otherwise modify your installation often, and\slash or have several systems on which to use \TL{}, it may be convenient to create an \ISO\ of your \TL{} installation, because: \begin{itemize} \item Copying an \ISO\ between different computers is much faster than copying a normal installation. \item If you are dual-booting between different operating systems and want them to share a \TL{} installation, an \ISO installation is not tied to the idiosyncrasies and limitations of other mutually supported filesystems (\acro{FAT32}, \acro{NTFS}, \acro{HFS+}). \item Virtual machines can simply mount such an \ISO. \end{itemize} Of course you can also burn an \ISO\ to \DVD, if that is useful for you. Desktop \GNU/Linux/Unix systems, including \MacOSX, are able to mount an \ISO. Apart from that, nothing changes compared to a normal hard disk installation, see section \ref{sec:env}. When preparing such an \ISO\ installation, it is best to omit the subdirectory for the release year, and have \filename{texmf-local} at the same level as the other trees (\filename{texmf}, \filename{texmf-dist}, etc.). You can do this with the normal directory options in the installer. For a physical (rather than virtual) Windows system, you can burn the \ISO\ to \acro{DVD}. However, it may be worth your while to investigate free \ISO-mounting options. For Windows \acro{XP}, Microsoft offers \filename{winxpvirtualcdcontrolpanel}. For Windows system integration, you can include the \filename{w32client} scripts described in section~\ref{sec:sharedinstall} and at \url{http://tug.org/texlive/w32client.html}, which work just as well for an \ISO\ as for a network installation. On \MacOSX, TeXShop and \TeX{}works will be able to use the \acro{DVD} installation if a symlink \filename{/usr/texbin} points to the appropriate binary directory, e.g., \begin{verbatim} sudo ln -s /Volumes/MyTeXLive/bin/universal-darwin /usr/texbin \end{verbatim} Historical note: \TL{} 2010 was the first \TL{} edition which was no longer distributed `live'. However, it always required some acrobatics to run from \DVD\ or \ISO; in particular, there was no way around setting at least one extra environment variable. If you create your \ISO\ from an existing installation then there is no need for this. \htmlanchor{tlmgr} \section{\cmdname{tlmgr}: Managing your installation} \label{sec:tlmgr} \begin{figure}[tb] \tlpng{tlmgr-gui}{\linewidth} \caption{\prog{tlmgr} in \GUI\ mode: main window, after `Load'.} \label{fig:tlmgr-gui} \end{figure} \begin{figure}[tb] \hbox to \hsize{% \vtop{\hsize=.59\linewidth \null % make figures align at the top \tlpng{tlmgr-general-options}{\hsize} \caption{\texttt{tlmgr} in \GUI\ mode: General options} \label{fig:tlmgr-general-options} } \hfil \vtop{\hsize=.39\linewidth \null \tlpng{tlmgr-paper-options}{\hsize} \caption{\texttt{tlmgr} in \GUI\ mode: Paper size options} \label{fig:tlmgr-paper-options} } } \end{figure} \TL{} includes a program named \prog{tlmgr} for managing \TL{} after the initial installation. The programs \prog{updmap}, \prog{fmtutil} and \prog{texconfig} are still included and will be retained in the future, but \prog{tlmgr} is now the preferred interface. Its capabilities include: \begin{itemize*} \item installing, updating, backing up, restoring, and uninstalling individual packages, optionally taking dependencies into account; \item searching for and listing packages, etc.; \item listing, adding, and removing platforms; \item changing installation options such as paper size and source location (see section~\ref{sec:location}). \end{itemize*} \subsection{\cmdname{tlmgr} GUI mode} \prog{tlmgr} can be started in \GUI{} mode (figure~\ref{fig:tlmgr-gui}) with \begin{alltt} > \Ucom{tlmgr -gui} \end{alltt} or in Windows via the Start menu: \texttt{Start}, \texttt{Programs}, \texttt{TeX Live 2012}, \texttt{TeX Live Manager}. After clicking `Load' it displays a list of available and installed packages. This assumes of course that the installation source is valid and reachable. Figures~\ref{fig:tlmgr-general-options} and~\ref{fig:tlmgr-paper-options} show the general and paper size option screens. \subsection{Sample \cmdname{tlmgr} command-line invocations} After the initial installation, you can update your system to the latest versions available with: \begin{alltt} > \Ucom{tlmgr update -all} \end{alltt} If this makes you nervous, first try \begin{alltt} > \Ucom{tlmgr update -all -dry-run} \end{alltt} or (less verbose): \begin{alltt} > \Ucom{tlmgr update -list} \end{alltt} This more complex example adds a collection, for the engine \XeTeX, from a local directory: \begin{alltt} > \Ucom{tlmgr -repository /local/mirror/tlnet install collection-xetex} \end{alltt} It generates the following output (abridged): \begin{fverbatim} install: collection-xetex install: arabxetex ... install: xetex install: xetexconfig install: xetex.i386-linux running post install action for xetex install: xetex-def ... running mktexlsr mktexlsr: Updating /usr/local/texlive/2012/texmf/ls-R... ... running fmtutil-sys --missing ... Transcript written on xelatex.log. fmtutil: /usr/local/texlive/2012/texmf-var/web2c/xetex/xelatex.fmt installed. \end{fverbatim} As you can see, \prog{tlmgr} installs dependencies, and takes care of any necessary post-install actions, including updating the filename database and (re)generating formats. In the above, we generated new formats for \XeTeX. To describe a package (or collection or scheme): \begin{alltt} > \Ucom{tlmgr show collection-latexextra} \end{alltt} which produces \begin{fverbatim} package: collection-latexextra category: Collection shortdesc: LaTeX supplementary packages longdesc: A large collection of add-on packages for LaTeX. installed: Yes revision: 14675 \end{fverbatim} Last and most important, for full documentation see \url{http://tug.org/texlive/tlmgr.html}, or: \begin{alltt} > \Ucom{tlmgr -help} \end{alltt} \section{Notes on Windows} \label{sec:windows} \subsection{Windows-specific features} \label{sec:winfeatures} Under Windows, the installer does some extra things: \begin{description} \item[Menus and shortcuts.] A new `\TL{}' submenu of the Start menu is installed, which contains entries for some \GUI{} programs (\prog{tlmgr}, \prog{texdoctk}, the PS\_View (\prog{psv}) PostScript previewer) and some documentation. \item[File associations.] If enabled, \prog{TeXworks}, \prog{Dviout} and \prog{PS\_view} become either the default program for their respective filetypes, or get an entry in the `Open with' right-click menus of those filetypes. \item[Bitmap to eps converter.] Various bitmapped formats get an entry \cmdname{bitmap2eps} in their `Open with' right-click menu. Bitmap2eps is a simple script which lets \cmdname{sam2p} or \cmdname{bmeps} do the real work. \item[Automatic path adjustment.] No manual configuration steps are required. \item[Uninstaller.] The installer creates an entry under `Add/Remove Programs' for \TL. The uninstall tab of the \TeX\ Live Manager \GUI\ refers to this. \end{description} \subsection{Additional software included on Windows} To be complete, a \TL{} installation needs support packages that are not commonly found on a Windows machine. \TL{} provides the missing pieces: \begin{description} \item[Perl and Ghostscript.] Because of the importance of Perl and Ghostscript, \TL{} includes `hidden' copies of these programs. \TL{} programs that need them know where to find them, but they don't betray their presence through environment variables or registry settings. They aren't full-scale installations, and shouldn't interfere with any system installations of Perl or Ghostscript. \item[PS\_View.] Also installed is PS\_View, a \PS{} and \acro{PDF} viewer; see figure~\ref{fig:psview}. \begin{figure}[tb] \tlpng{psview}{.6\linewidth} \caption{PS\_View: very high magnifications available!}\label{fig:psview} \end{figure} \item[dviout.] Also installed is \prog{dviout}, a \acro{DVI} viewer. At first, when you preview files with \cmdname{dviout}, it will create fonts, because screen fonts were not installed. After a while, you will have created most of the fonts you use, and you will rarely see the font-creation window. More information can be found in the (highly recommended) on-line help. \item[\TeX{}works.] \TeX{}works is a \TeX-oriented editor with an integrated \acro{PDF} viewer. \item[Command-line tools.] A number of Windows ports of common Unix command-line programs are installed along with the usual \TL{} binaries. These include \cmdname{gzip}, \cmdname{unzip} and the utilities from the \cmdname{xpdf} suite (\cmdname{pdfinfo}, \cmdname{pdffonts}, \ldots). The \cmdname{xpdf} viewer itself is not available for Windows. Instead, you can download the Sumatra \acro{PDF} viewer, which is based on \cmdname{xpdf}, from \url{http://blog.kowalczyk.info/software/sumatrapdf}, among other options. \item[fc-list, fc-cache, \ldots] The tools from the fontconfig library allow \XeTeX{} to handle system fonts on Windows. You can use \prog{fc-list} to determine the font names to pass to \XeTeX's extended \cs{font} command. If necessary, run \prog{fc-cache} first to update font information. \end{description} \subsection{User Profile is Home} \label{sec:winhome} The Windows counterpart of a Unix home directory is the \verb|%USERPROFILE%| directory. Under Windows \acro{XP}, this is usually \verb|C:\Documents and Settings\|, and under Windows Vista and Windows~7 it is \verb|C:\Users\|. In the \filename{texmf.cnf} file, and \KPS{} in general, \verb|~| will expand appropriately on both Windows and Unix. \subsection{The Windows registry} \label{sec:registry} Windows stores nearly all configuration data in its registry. The registry contains a set of hierarchically organized keys, with several root keys. The most important ones for installation programs are \path{HKEY_CURRENT_USER} and \path{HKEY_LOCAL_MACHINE}, \path{HKCU} and \path{HKLM} in short. The \path{HKCU} part of the registry is in the user's home directory (see section~\ref{sec:winhome}). \path{HKLM} is normally in a subdirectory of the Windows directory. In some cases, system information could be obtained from environment variables but for other information, for example the location of shortcuts, it is necessary to consult the registry. Setting environment variables permanently also requires registry access. \subsection{Windows permissions} \label{sec:winpermissions} In later versions of Windows, a distinction is made between regular users and administrators, where only the latter have free access to the entire operating system. In practice, though, you could better describe these classes of users as unprivileged users and normal users: being an administrator is the rule, not the exception. Nevertheless, we have made an effort to make \TL{} installable without administrative privileges. If the user is an administrator, there is an option to install for all users. If this option is chosen, shortcuts are created for all users, and the system environment is modified. Otherwise, shortcuts and menu entries are created for the current user, and the user environment is modified. Regardless of administrator status, the default root of \TL{} proposed by the installer is always under \verb|%SystemDrive%|. The installer always tests whether the root is writable for the current user. A problem may arise if the user is not an administrator and \TeX{} already exists in the search path. Since the effective path consists of the system path followed by the user path, the new \TL{} would never get precedence. As a safeguard, the installer creates a shortcut to the command-prompt in which the new \TL{} binary directory is prepended to the local search path. The new \TL{} will be always usable from within such a command-prompt. The shortcut for \TeX{}works, if installed, also prepends \TL{} to the search path, so it should also be immune to this path problem. For Vista and Windows~7 there is another twist: even if you are logged in as administrator, you need to explicitly ask for administrator privileges. In fact, there is not much point in logging in as administrator. Instead, right-clicking on the program or shortcut that you want to run usually gives you a choice `Run as administrator'. \subsection{Increasing maximum memory on Windows and Cygwin} \label{sec:cygwin-maxmem} Windows and Cygwin (see section~\ref{sec:cygwin} for Cygwin installation specifics) users may find that they run out of memory when running some of the programs shipped with \TL. For example, \prog{asy} might run out of memory if you try to allocate an array of 25,000,000 reals, and Lua\TeX\ might run out of memory if you try to process a document with a lot of big fonts. For Cygwin, you can increase the amount of available memory by following the instructions in the Cygwin User's Guide (\url{http://www.cygwin.com/cygwin-ug-net/setup-maxmem.html}). For Windows, you have to create a file, say \code{moremem.reg}, with these four lines: \begin{sverbatim} Windows Registry Editor Version 5.00 [HKEY_LOCAL_MACHINE\Software\Cygwin] "heap_chunk_in_mb"=dword:ffffff00 \end{sverbatim} \noindent and then execute the command \code{regedit /s moremem.reg} as administrator. (If you want to change memory only for the current user instead of system-wide, use \code{HKEY\_CURRENT\_USER}.) \section{A user's guide to Web2C} \Webc{} is an integrated collection of \TeX-related programs: \TeX{} itself, \MF{}, \MP, \BibTeX{}, etc. It is the heart of \TL{}. The home page for \Webc{}, with the current manual and more, is \url{http://tug.org/web2c}. A bit of history: The original implementation was by Tomas Rokicki who, in 1987, developed a first \TeX{}-to-C system based on change files under Unix, which were primarily the original work of Howard Trickey and Pavel Curtis. Tim Morgan became the maintainer of the system, and during this period the name changed to Web-to-C\@. In 1990, Karl Berry took over the work, assisted by dozens of additional contributors, and in 1997 he handed the baton to Olaf Weber, who returned it to Karl in 2006. The \Webc{} system runs on Unix, 32-bit Windows systems, \MacOSX{}, and other operating systems. It uses Knuth's original sources for \TeX{} and other basic programs written in the \web{} literate programming system and translates them into C source code. The core \TeX{} programs handled in this way are: \begin{cmddescription} \item[bibtex] Maintaining bibliographies. \item[dvicopy] Expands virtual font references in \dvi{} files. \item[dvitomp] \dvi{} to MPX (MetaPost pictures). \item[dvitype] \dvi{} to human-readable text. \item[gftodvi] Generic font proofsheets. \item[gftopk] Generic to packed fonts. \item[gftype] GF to human-readable text. \item[mf] Creating typeface families. \item[mft] Prettyprinting \MF{} source. \item[mpost] Creating technical diagrams. \item[patgen] Creating hyphenation patterns. \item[pktogf] Packed to generic fonts. \item[pktype] PK to human-readable text. \item[pltotf] Plain text property list to TFM. \item[pooltype] Display \web{} pool files. \item[tangle] \web{} to Pascal. \item[tex] Typesetting. \item[tftopl] TFM to plain text property list. \item[vftovp] Virtual font to virtual property list. \item[vptovf] Virtual property list to virtual font. \item[weave] \web{} to \TeX. \end{cmddescription} \noindent The precise functions and syntax of these programs are described in the documentation of the individual packages and of \Webc{} itself. However, knowing a few principles governing the whole family of programs will help you take advantage of your \Webc{} installation. All programs honor these standard \GNU options: \begin{ttdescription} \item[-{}-help] print basic usage summary. \item[-{}-verbose] print detailed progress report. \item[-{}-version] print version information, then exit. \end{ttdescription} For locating files the \Webc{} programs use the path searching library \KPS{} (\url{http://tug.org/kpathsea}). This library uses a combination of environment variables and a configuration files to optimize searching the (huge) collection of \TeX{} files. \Webc{} can look at many directory trees simultaneously, which is useful in maintaining \TeX's standard distribution and local and personal extensions in distinct trees. To speed up file searches, the root of each tree has a file \file{ls-R}, containing an entry showing the name and relative pathname for all files under that root. \subsection{Kpathsea path searching} \label{sec:kpathsea} Let us first describe the generic path searching mechanism of the \KPS{} library. We call a \emph{search path} a colon- or semicolon\hyph sepa\-rated list of \emph{path elements}, which are basically directory names. A search path can come from (a combination of) many sources. To look up a file \samp{my-file} along a path \samp{.:/dir}, \KPS{} checks each element of the path in turn: first \file{./my-file}, then \file{/dir/my-file}, returning the first match (or possibly all matches). In order to adapt optimally to all operating systems' conventions, on non-Unix systems \KPS{} can use filename separators different from colon (\samp{:}) and slash (\samp{/}). To check a particular path element \var{p}, \KPS{} first checks if a prebuilt database (see ``Filename data\-base'' on page~\pageref{sec:filename-database}) applies to \var{p}, i.e., if the database is in a directory that is a prefix of \var{p}. If so, the path specification is matched against the contents of the database. If the database does not exist, or does not apply to this path element, or contains no matches, the filesystem is searched (if this was not forbidden by a specification starting with \samp{!!}\ and if the file being searched for must exist). \KPS{} constructs the list of directories that correspond to this path element, and then checks in each for the file being sought. The ``file must exist'' condition comes into play with \samp{.vf} files and input files read by \TeX's \cs{openin} command. Such files may not exist (e.g., \file{cmr10.vf}), and so it would be wrong to search the disk for them. Therefore, if you fail to update \file{ls-R} when you install a new \samp{.vf} file, it will never be found. Each path element is checked in turn: first the database, then the disk. If a match is found, the search stops and the result is returned. Although the simplest and most common path element is a directory name, \KPS{} supports additional features in search paths: layered default values, environment variable names, config file values, users' home directories, and recursive subdirectory searching. Thus, we say that \KPS{} \emph{expands} a path element, meaning it transforms all the specifications into basic directory name or names. This is described in the following sections in the same order as it takes place. Note that if the filename being searched for is absolute or explicitly relative, i.e., starts with \samp{/} or \samp{./} or \samp{../}, \KPS{} simply checks if that file exists. \ifSingleColumn \else \begin{figure*} \verbatiminput{examples/ex5.tex} \setlength{\abovecaptionskip}{0pt} \caption{An illustrative configuration file sample} \label{fig:config-sample} \end{figure*} \fi \subsubsection{Path sources} \label{sec:path-sources} A search path can come from many sources. In the order in which \KPS{} uses them: \begin{enumerate} \item A user-set environment variable, for instance, \envname{TEXINPUTS}\@. Environment variables with a period and a program name appended override; e.g., if \samp{latex} is the name of the program being run, then \envname{TEXINPUTS.latex} will override \envname{TEXINPUTS}. \item A program-specific configuration file, for exam\-ple, a line \samp{S /a:/b} in \cmdname{dvips}'s \file{config.ps}. \item A \KPS{} configuration file \file{texmf.cnf}, containing a line like \samp{TEXINPUTS=/c:/d} (see below). \item The compile-time default. \end{enumerate} \noindent You can see each of these values for a given search path by using the debugging options (see ``Debugging actions'' on page~\pageref{sec:debugging}). \subsubsection{Config files} \KPS{} reads \emph{runtime configuration files} named \file{texmf.cnf} for search path and other definitions. The search path used to look for these files is named \envname{TEXMFCNF}, but we do not recommend setting this (or any) environment variable. Instead, normal installation results in a file \file{.../2012/texmf.cnf}. If you must make changes to the defaults (not normally necessary), this is the place to put them. The main configuration file is in \file{.../2012/texmf/web2c/texmf.cnf}. You should not edit this latter file, as your changes will be lost when the distributed version is updated. \emph{All} \file{texmf.cnf} files in the search path will be read and definitions in earlier files override those in later files. For example, with a search path of \verb|.:$TEXMF|, values from \file{./texmf.cnf} override those from \verb|$TEXMF/texmf.cnf|. \begin{itemize} \item Comments start with \code{\%} and continue to the end of the line. \item Blank lines are ignored. \item A \bs{} at the end of a line acts as a continuation character, i.e., the next line is appended. Whitespace at the beginning of continuation lines is not ignored. \item Each remaining line has the form: \begin{alltt} \var{variable}[.\var{progname}] [=] \var{value} \end{alltt}% where the \samp{=} and surrounding whitespace are optional. \item The \ttvar{variable} name may contain any character other than whitespace, \samp{=}, or \samp{.}, but sticking to \samp{A-Za-z\_} is safest. \item If \samp{.\var{progname}} is present, the definition only applies if the program that is running is named \texttt{\var{progname}} or \texttt{\var{progname}.exe}. This allows different flavors of \TeX{} to have different search paths, for example. \item \var{value} may contain any characters except \code{\%} and \samp{@}. The \code{\$\var{var}.\var{prog}} feature is not available on the right-hand side; instead, you must use an additional variable. A \samp{;}\ in \var{value} is translated to \samp{:}\ if running under Unix; this is useful to be able to have a single \file{texmf.cnf} for Unix, \acro{MS-DOS} and Windows systems. \item All definitions are read before anything is expanded, so variables can be referenced before they are defined. \end{itemize} A configuration file fragment illustrating most of these points is \ifSingleColumn shown below: \verbatiminput{examples/ex5.tex} \else shown in Figure~\ref{fig:config-sample}. \fi \subsubsection{Path expansion} \label{sec:path-expansion} \KPS{} recognizes certain special characters and constructions in search paths, similar to those available in Unix shells. As a general example, the complex path, \verb+~$USER/{foo,bar}//baz+, expands to all subdirectories under directories \file{foo} and \file{bar} in \texttt{\$USER}'s home directory that contain a directory or file \file{baz}. These expansions are explained in the sections below. %$ \subsubsection{Default expansion} \label{sec:default-expansion} If the highest-priority search path (see ``Path sources'' on page~\pageref{sec:path-sources}) contains an \emph{extra colon} (i.e., leading, trailing, or doubled), \KPS{} inserts at that point the next-highest-prio\-rity search path that is defined. If that inserted path has an extra colon, the same happens with the next highest. For example, given an environment variable setting \begin{alltt} > \Ucom{setenv TEXINPUTS /home/karl:} \end{alltt} and a \code{TEXINPUTS} value from \file{texmf.cnf} of \begin{alltt} .:\$TEXMF//tex \end{alltt} then the final value used for searching will be: \begin{alltt} /home/karl:.:\$TEXMF//tex \end{alltt} Since it would be useless to insert the default value in more than one place, \KPS{} changes only one extra \samp{:}\ and leaves any others in place. It checks first for a leading \samp{:}, then a trailing \samp{:}, then a doubled \samp{:}. \subsubsection{Brace expansion} \label{sec:brace-expansion} A useful feature is brace expansion, which means that, for instance, \verb+v{a,b}w+ expands to \verb+vaw:vbw+. Nesting is allowed. This is used to implement multiple \TeX{} hierarchies, by assigning a brace list to \code{\$TEXMF}. For example, in \file{texmf.cnf}, a definition like this (simplified for this example) is made: \begin{verbatim} TEXMF = {$TEXMFHOME,$TEXMFLOCAL,!!$TEXMFVAR,!!$TEXMFMAIN} \end{verbatim} Using this you can then write something like \begin{verbatim} TEXINPUTS = .;$TEXMF/tex// \end{verbatim} %$ which means that, after looking in the current directory, the \code{\$TEXMFHOME/tex}, \code{\$TEXMFLOCAL/tex}, \code{\$TEXMFVAR/tex} and \code{\$TEXMFMAIN/tex} trees \emph{only}) will be searched (the last two use using \file{ls-R} data base files). It is a convenient way for running two parallel \TeX{} structures, one ``frozen'' (on a \CD, for instance) and the other being continuously updated with new versions as they become available. By using the \code{\$TEXMF} variable in all definitions, one is sure to always search the up-to-date tree first. \subsubsection{Subdirectory expansion} \label{sec:subdirectory-expansion} Two or more consecutive slashes in a path element following a directory \var{d} is replaced by all subdirectories of \var{d}: first those subdirectories directly under \var{d}, then the subsubdirectories under those, and so on. At each level, the order in which the directories are searched is \emph{unspecified}. If you specify any filename components after the \samp{//}, only subdirectories with matching components are included. For example, \samp{/a//b} expands into directories \file{/a/1/b}, \file{/a/2/b}, \file{/a/1/1/b}, and so on, but not \file{/a/b/c} or \file{/a/1}. Multiple \samp{//} constructs in a path are possible, but \samp{//} at the beginning of a path is ignored. \subsubsection{List of special characters and their meaning: a summary} The following list summarizes the special characters in \KPS{} configuration files. % need a wider space for the item labels here. \newcommand{\CODE}[1]{\makebox[3em][l]{\code{#1}}} \begin{ttdescription} \item[\CODE{:}] Separator in path specification; at the beginning or the end of a path it substitutes the default path expansion.\par \item[\CODE{;}] Separator on non-Unix systems (acts like \code{:}). \item[\CODE{\$}] Variable expansion. \item[\CODE{\string~}] Represents the user's home directory. \item[\CODE{\char`\{...\char`\}}] Brace expansion. \item[\CODE{//}] Subdirectory expansion (can occur anywhere in a path, except at its beginning). \item[\CODE{\%}] Start of comment. \item[\CODE{\bs}] Continuation character (allows multi-line entries). \item[\CODE{!!}] Search \emph{only} database to locate file, \emph{do not} search the disk. \end{ttdescription} \subsection{Filename databases} \label{sec:filename-database} \KPS{} goes to some lengths to minimize disk accesses for searches. Nevertheless, at installations with enough directories, searching each possible directory for a given file can take an excessively long time (this is especially true if many hundreds of font directories have to be traversed.) Therefore, \KPS{} can use an externally-built plain text ``database'' file named \file{ls-R} that maps files to directories, thus avoiding the need to exhaustively search the disk. A second database file \file{aliases} allows you to give additional names to the files listed in \file{ls-R}. This can be helpful to confirm to \acro{DOS} 8.3 filename conventions in source files. \subsubsection{The filename database} \label{sec:ls-R} As explained above, the name of the main filename database must be \file{ls-R}. You can put one at the root of each \TeX{} hierarchy in your installation that you wish to be searched (\code{\$TEXMF} by default). \KPS{} looks for \file{ls-R} files along the \code{TEXMFDBS} path. The recommended way to create and maintain \samp{ls-R} is to run the \code{mktexlsr} script included with the distribution. It is invoked by the various \samp{mktex}\dots\ scripts. In principle, this script just runs the command \begin{alltt} cd \var{/your/texmf/root} && \path|\|ls -1LAR ./ >ls-R \end{alltt} presuming your system's \code{ls} produces the right output format (\GNU \code{ls} is all right). To ensure that the database is always up-to-date, it is easiest to rebuild it regularly via \code{cron}, so that it is automatically updated when the installed files change, such as after installing or updating a \LaTeX{} package. If a file is not found in the database, by default \KPS{} goes ahead and searches the disk. If a particular path element begins with \samp{!!}, however, \emph{only} the database will be searched for that element, never the disk. \subsubsection{kpsewhich: Standalone path searching} \label{sec:invoking-kpsewhich} The \texttt{kpsewhich} program exercises path searching independent of any particular application. This can be useful as a sort of \code{find} program to locate files in \TeX{} hierarchies (this is used heavily in the distributed \samp{mktex}\dots\ scripts). \begin{alltt} > \Ucom{kpsewhich \var{option}\dots{} \var{filename}\dots{}} \end{alltt} The options specified in \ttvar{option} start with either \samp{-} or \samp{-{}-}, and any unambiguous abbreviation is accepted. \KPS{} looks up each non-option argument on the command line as a filename, and returns the first file found. There is no option to return all the files with a particular name (you can run the Unix \samp{find} utility for that). The most common options are described next. \begin{ttdescription} \item[\texttt{-{}-dpi=\var{num}}]\mbox{} Set the resolution to \ttvar{num}; this only affects \samp{gf} and \samp{pk} lookups. \samp{-D} is a synonym, for compatibility with \cmdname{dvips}. Default is 600. \item[\texttt{-{}-format=\var{name}}]\mbox{}\\ Set the format for lookup to \ttvar{name}. By default, the format is guessed from the filename. For formats which do not have an associated unambiguous suffix, such as \MP{} support files and \cmdname{dvips} configuration files, you have to specify the name as known to \KPS{}, such as \texttt{tex} or \texttt{enc files}. Run \texttt{kpsewhich -{}-help} for a list. \item[\texttt{-{}-mode=\var{string}}]\mbox{}\\ Set the mode name to \ttvar{string}; this only affects \samp{gf} and \samp{pk} lookups. No default: any mode will be found. \item[\texttt{-{}-must-exist}]\mbox{}\\ Do everything possible to find the files, notably including searching the disk. By default, only the \file{ls-R} database is checked, in the interest of efficiency. \item[\texttt{-{}-path=\var{string}}]\mbox{}\\ Search along the path \ttvar{string} (colon-separated as usual), instead of guessing the search path from the filename. \samp{//} and all the usual expansions are supported. The options \samp{-{}-path} and \samp{-{}-format} are mutually exclusive. \item[\texttt{-{}-progname=\var{name}}]\mbox{}\\ Set the program name to \texttt{\var{name}}. This can affect the search paths via the \texttt{.\var{progname}} feature. The default is \cmdname{kpsewhich}. \item[\texttt{-{}-show-path=\var{name}}]\mbox{}\\ shows the path used for file lookups of file type \texttt{\var{name}}. Either a filename extension (\code{.pk}, \code{.vf}, etc.) or a name can be used, just as with \samp{-{}-format} option. \item[\texttt{-{}-debug=\var{num}}]\mbox{}\\ sets the debugging options to \texttt{\var{num}}. \end{ttdescription} \subsubsection{Examples of use} \label{sec:examples-of-use} Let us now have a look at \KPS{} in action. Here's a straightforward search: \begin{alltt} > \Ucom{kpsewhich article.cls} /usr/local/texmf-dist/tex/latex/base/article.cls \end{alltt} We are looking for the file \file{article.cls}. Since the \samp{.cls} suffix is unambiguous we do not need to specify that we want to look for a file of type \optname{tex} (\TeX{} source file directories). We find it in the subdirectory \file{tex/latex/base} below the \samp{texmf-dist} \TL\ directory. Similarly, all of the following are found without problems thanks to their unambiguous suffix. \begin{alltt} > \Ucom{kpsewhich array.sty} /usr/local/texmf-dist/tex/latex/tools/array.sty > \Ucom{kpsewhich latin1.def} /usr/local/texmf-dist/tex/latex/base/latin1.def > \Ucom{kpsewhich size10.clo} /usr/local/texmf-dist/tex/latex/base/size10.clo > \Ucom{kpsewhich small2e.tex} /usr/local/texmf-dist/tex/latex/base/small2e.tex > \Ucom{kpsewhich tugboat.bib} /usr/local/texmf-dist/bibtex/bib/beebe/tugboat.bib \end{alltt} By the way, that last is a \BibTeX{} bibliography database for \textsl{TUGboat} articles. \begin{alltt} > \Ucom{kpsewhich cmr10.pk} \end{alltt} Font bitmap glyph files of type \file{.pk} are used by display programs like \cmdname{dvips} and \cmdname{xdvi}. Nothing is returned in this case since there are no pre-generated Computer Modern \samp{.pk} files in \TL{}\Dash the Type~1 variants are used by default. \begin{alltt} > \Ucom{kpsewhich wsuipa10.pk} \ifSingleColumn /usr/local/texmf-var/fonts/pk/ljfour/public/wsuipa/wsuipa10.600pk \else /usr/local/texmf-var/fonts/pk/ljfour/public/ ... wsuipa/wsuipa10.600pk \fi\end{alltt} For these fonts (a phonetic alphabet from the University of Washington) we had to generate \samp{.pk} files, and since the default \MF{} mode on our installation is \texttt{ljfour} with a base resolution of 600\dpi{} (dots per inch), this instantiation is returned. \begin{alltt} > \Ucom{kpsewhich -dpi=300 wsuipa10.pk} \end{alltt} In this case, when specifying that we are interested in a resolution of 300\dpi{} (\texttt{-dpi=300}) we see that no such font is available on the system. A program like \cmdname{dvips} or \cmdname{xdvi} would go off and actually build the required \texttt{.pk} files using the script \cmdname{mktexpk}. Next we turn our attention to \cmdname{dvips}'s header and configuration files. We first look at one of the commonly used files, the general prologue \file{tex.pro} for \TeX{} support, before turning our attention to the generic configuration file (\file{config.ps}) and the \PS{} font map \file{psfonts.map}\Dash as of 2004, map and encoding files have their own search paths and new location in \dirname{texmf} trees. As the \samp{.ps} suffix is ambiguous we have to specify explicitly which type we are considering (\optname{dvips config}) for the file \texttt{config.ps}. \begin{alltt} > \Ucom{kpsewhich tex.pro} /usr/local/texmf/dvips/base/tex.pro > \Ucom{kpsewhich --format="dvips config" config.ps} /usr/local/texmf/dvips/config/config.ps > \Ucom{kpsewhich psfonts.map} /usr/local/texmf/fonts/map/dvips/updmap/psfonts.map \end{alltt} We now take a closer look at the \acro{URW} Times \PS{} support files. The prefix for these in the standard font naming scheme is \samp{utm}. The first file we look at is the configuration file, which contains the name of the map file: \begin{alltt} > \Ucom{kpsewhich --format="dvips config" config.utm} /usr/local/texmf-dist/dvips/psnfss/config.utm \end{alltt} The contents of that file is \begin{alltt} p +utm.map \end{alltt} which points to the file \file{utm.map}, which we want to locate next. \begin{alltt} > \Ucom{kpsewhich utm.map} /usr/local/texmf-dist/fonts/map/dvips/times/utm.map \end{alltt} This map file defines the file names of the Type~1 \PS{} fonts in the URW collection. Its contents look like (we only show part of the lines): \begin{alltt} utmb8r NimbusRomNo9L-Medi ... \Ucom{kpsewhich utmr8a.pfb} \ifSingleColumn /usr/local/texmf-dist/fonts/type1/urw/times/utmr8a.pfb \else /usr/local/texmf-dist/fonts/type1/ ... urw/utm/utmr8a.pfb \fi\end{alltt} It should be evident from these examples how you can easily locate the whereabouts of a given file. This is especially important if you suspect that the wrong version of a file is picked up somehow, since \cmdname{kpsewhich} will show you the first file encountered. \subsubsection{Debugging actions} \label{sec:debugging} Sometimes it is necessary to investigate how a program resolves file references. To make this practical, \KPS{} offers various levels of debugging output: \begin{ttdescription} \item[\texttt{\ 1}] \texttt{stat} calls (disk lookups). When running with an up-to-date \file{ls-R} database this should almost give no output. \item[\texttt{\ 2}] References to hash tables (such as \file{ls-R} databases, map files, configuration files). \item[\texttt{\ 4}] File open and close operations. \item[\texttt{\ 8}] General path information for file types searched by \KPS. This is useful to find out where a particular path for the file was defined. \item[\texttt{16}] Directory list for each path element (only relevant for searches on disk). \item[\texttt{32}] File searches. \item[\texttt{64}] Variable values. \end{ttdescription} A value of \texttt{-1} will set all the above options; in practice, this is usually the most convenient. Similarly, with the \cmdname{dvips} program, by setting a combination of debug switches, one can follow in detail where files are being picked up from. Alternatively, when a file is not found, the debug trace shows in which directories the program looks for the given file, so that one can get an indication what the problem~is. Generally speaking, as most programs call the \KPS{} library internally, one can select a debug option by using the \envname{KPATHSEA\_DEBUG} environment variable, and setting it to (a combination of) values as described in the above list. (Note for Windows users: it is not easy to redirect all messages to a file in this system. For diagnostic purposes you can temporarily \texttt{SET KPATHSEA\_DEBUG\_OUTPUT=err.log}). Let us consider, as an example, a small \LaTeX{} source file, \file{hello-world.tex}, which contains the following input. \begin{verbatim} \documentclass{article} \begin{document} Hello World! \end{document} \end{verbatim} This little file only uses the font \file{cmr10}, so let us look at how \cmdname{dvips} prepares the \PS{} file (we want to use the Type~1 version of the Computer Modern fonts, hence the option \texttt{-Pcms}). \begin{alltt} > \Ucom{dvips -d4100 hello-world -Pcms -o} \end{alltt} In this case we have combined \cmdname{dvips}'s debug class 4 (font paths) with \KPS's path element expansion (see \cmdname{dvips} Reference Manual, \OnCD{texmf/doc/dvips/dvips.pdf}). The output (slightly rearranged) appears in Figure~\ref{fig:dvipsdbga}. \begin{figure*}[tp] \centering \input{examples/ex6a.tex} \caption{Finding configuration files}\label{fig:dvipsdbga} \bigskip \input{examples/ex6b.tex} \caption{Finding the prolog file}\label{fig:dvipsdbgb} \bigskip \input{examples/ex6c.tex} \caption{Finding the font file}\label{fig:dvipsdbgc} \end{figure*} \cmdname{dvips} starts by locating its working files. First, \file{texmf.cnf} is found, which gives the definitions of the search paths for the other files, then the file database \file{ls-R} (to optimize file searching) and the file \file{aliases}, which makes it possible to declare several names (e.g., a short \acro{DOS}-like 8.3 and a more natural longer version) for the same file. Then \cmdname{dvips} goes on to find the generic configuration file \file{config.ps} before looking for the customization file \file{.dvipsrc} (which, in this case is \emph{not found}). Finally, \cmdname{dvips} locates the config file for the Computer Modern \PS{} fonts \file{config.cms} (this was initiated with the \texttt{-Pcms} option on the \cmdname{dvips} command). This file contains the list of the map files which define the relation between the \TeX{}, \PS{} and file system names of the fonts. \begin{alltt} > \Ucom{more /usr/local/texmf/dvips/cms/config.cms} p +ams.map p +cms.map p +cmbkm.map p +amsbkm.map \end{alltt} \cmdname{dvips} thus goes on to find all these files, plus the generic map file \file{psfonts.map}, which is always loaded (it contains declarations for commonly used \PS{} fonts; see the last part of Section \ref{sec:examples-of-use} for more details about \PS{} map file handling). At this point \cmdname{dvips} identifies itself to the user: \begin{alltt} This is dvips(k) 5.92b Copyright 2002 Radical Eye Software (www.radicaleye.com) \end{alltt} \ifSingleColumn Then it goes on to look for the prolog file \file{texc.pro}: \begin{alltt}\small kdebug:start search(file=texc.pro, must\_exist=0, find\_all=0, path=.:~/tex/dvips//:!!/usr/local/texmf/dvips//: ~/tex/fonts/type1//:!!/usr/local/texmf/fonts/type1//). kdebug:search(texc.pro) => /usr/local/texmf/dvips/base/texc.pro \end{alltt} \else Then it goes on to look for the prolog file \file{texc.pro} (see Figure~\ref{fig:dvipsdbgb}). \fi After having found the file in question, \cmdname{dvips} outputs the date and time, and informs us that it will generate the file \file{hello-world.ps}, then that it needs the font file \file{cmr10}, and that the latter is declared as ``resident'' (no bitmaps needed): \begin{alltt}\small TeX output 1998.02.26:1204' -> hello-world.ps Defining font () cmr10 at 10.0pt Font cmr10 is resident. \end{alltt} Now the search is on for the file \file{cmr10.tfm}, which is found, then a few more prolog files (not shown) are referenced, and finally the Type~1 instance \file{cmr10.pfb} of the font is located and included in the output file (see last line). \begin{alltt}\small kdebug:start search(file=cmr10.tfm, must\_exist=1, find\_all=0, path=.:~/tex/fonts/tfm//:!!/usr/local/texmf/fonts/tfm//: /var/tex/fonts/tfm//). kdebug:search(cmr10.tfm) => /usr/local/texmf/fonts/tfm/public/cm/cmr10.tfm kdebug:start search(file=texps.pro, must\_exist=0, find\_all=0, ... kdebug:start search(file=cmr10.pfb, must\_exist=0, find\_all=0, path=.:~/tex/dvips//:!!/usr/local/texmf/dvips//: ~/tex/fonts/type1//:!!/usr/local/texmf/fonts/type1//). kdebug:search(cmr10.pfb) => /usr/local/texmf/fonts/type1/public/cm/cmr10.pfb [1] \end{alltt} \subsection{Runtime options} Another useful feature of \Webc{} is its possibility to control a number of memory parameters (in particular, array sizes) via the runtime file \file{texmf.cnf} read by \KPS{}. The memory settings can be found in Part~3 of that file in the \TL{} distribution. The more important are: \begin{ttdescription} \item[\texttt{main\_memory}] Total words of memory available, for \TeX{}, \MF{} and \MP. You must make a new format file for each different setting. For instance, you could generate a ``huge'' version of \TeX{}, and call the format file \texttt{hugetex.fmt}. Using the standard way of specifying the program name used by \KPS{}, the particular value of the \texttt{main\_memory} variable will then be read from \file{texmf.cnf}. \item[\texttt{extra\_mem\_bot}] Extra space for ``large'' \TeX{} data structures: boxes, glue, breakpoints, etc. Especially useful if you use \PiCTeX{}. \item[\texttt{font\_mem\_size}] Number of words for font information available for \TeX. This is more or less the total size of all \acro{TFM} files read. \item[\texttt{hash\_extra}] Additional space for the hash table of control sequence names. Only $\approx$10,000 control sequences can be stored in the main hash table; if you have a large book with numerous cross-references, this might not be enough. The default value of \texttt{hash\_extra} is \texttt{50000}. \end{ttdescription} \noindent Of course, this facility is no substitute for truly dynamic arrays and memory allocation, but since these are extremely difficult to implement in the present \TeX{} source, these runtime parameters provide a practical compromise allowing some flexibility. \begin{comment} \section{Building on a new Unix platform} If you have a platform for which executables are not included, you will need to compile \TeX{} and friends. This is not as hard as it sounds. What you need is all in the directory \texttt{source} in the distribution. \subsection{Prerequisites} You will need at least 100 megabytes of disk space to compile all of \TeX{} and its support programs. You'll also need an \acro{ANSI} C compiler, a \cmdname{make} utility, a lexical scanner, and a parser generator. We recommend the \GNU version of these programs (\cmdname{gcc}, \GNU \cmdname{make}, \cmdname{m4}, \cmdname{flex}, \cmdname{bison}). You may be able to work with other C compilers and \cmdname{make} programs, but you will need a good understanding of building Unix programs to sort out problems. Also, the command \texttt{uname} must return a sensible value. \subsection{Configuration} To begin, perform a normal installation of \TL{} to your disk (see section~\ref{sec:install-disk} on \p.\pageref{sec:install-disk}). You may wish to skip installing all of the prebuilt binaries. Then, unpack the source from the compressed \texttt{tar} file in the directory \dirname{source} to your disk and change directory to where you placed it. Next, run \cmdname{configure} with a command line like this: \begin{alltt} > \Ucom{sh configure -prefix=/usr/local/TeX} \end{alltt} The \optname{-prefix} directory is the one where you installed the support tree; the directory layout will be as follows (where \$TEXDIR stands for the directory you chose): \noindent \begin{tabular}{>{\ttfamily}ll@{}} \dirname{$TEXDIR/share/texmf} & main tree with fonts,\\ & \qquad macros, etc\\ \dirname{$TEXDIR/man} & Unix manual pages\\ \dirname{$TEXDIR/info} & \GNU style Info manuals\\ \dirname{$TEXDIR/bin/$PLATFORM} & binaries\\ \end{tabular} %$ If you want to leave out the \dirname{$PLATFORM} directory level, i.e., put the binaries directly into \dirname{$TEXDIR/bin}, specify the \verb|--disable-multiplatform| option to \cmdname{configure}. Have a look at the output of \verb|./configure --help| for more options you can use. For example, you can skip building of \OMEGA{} and \eTeX{}. \subsection{Running \cmdname{make}} Make sure the shell variable or option \texttt{noclobber} is not set. Then, run the main \cmdname{make} like this: \begin{alltt} > \Ucom{make world} \end{alltt} and relax\ldots Alternatively, you want to log all the output, as in: \begin{alltt} > \Ucom{sh -c "make world >world.log 2>\&1" \&} \end{alltt} Before you believe that everything went ok, please check the log file for errors: \GNU \cmdname{make} always uses the string \samp{***} whenever a command fails. Also, check if all the programs were built: \begin{alltt} > \Ucom{cd \var{TEXDIR}/bin/\var{archname}} > \Ucom{ls | wc} \end{alltt} The result should be over 200 (you can check the exact number with the \dirname{bin} directory contents in the distribution). If you need special privileges for \texttt{make install}, you can separate the \samp{make world} into two different runs, like this: \begin{alltt} > \Ucom{make all} > \Ucom{su} > \Ucom{make install strip} \end{alltt} After you've installed your new binaries, you should follow the normal post-installation procedures, given in section~\ref{sec:postinstall} (\p.\pageref{sec:postinstall}). Also, if you'd like to make your binaries available to others, please contact us. We'll be happy to put them on the \TL\ web pages. \end{comment} \htmlanchor{ack} \section{Acknowledgements} \TL{} is a joint effort by virtually all of the \TeX{} user groups. This edition of \TL{} was overseen by Karl Berry. The other principal contributors, past and present, are listed below. \begin{itemize*} \item The English, German, Dutch, and Polish \TeX{} user groups (\acro{TUG}, \acro{DANTE} e.V., \acro{NTG}, and \acro{GUST}, respectively), which provide the necessary technical and administrative infrastructure. Please join the \TeX\ user group near you! (See \url{http://tug.org/usergroups.html}.) \item The \acro{CTAN} team, notably Robin Fairbairns, Jim Hef{}feron, and Rainer Sch\"opf, which distributes the \TL{} images and provides the common infrastructure for package updates, upon which \TL{} depends. \item Nelson Beebe, for making many platforms available to \TL\ developers, and his own comprehensive testing. \item John Bowman, for making many changes to his advanced graphics program Asymptote to make it work in \TL. \item Peter Breitenlohner and the \eTeX\ team for the stable foundation of future \TeX's, and Peter specifically for stellar help with \GNU\ autotools usage throughout \TL. \item Jin-Hwan Cho and all of the DVIPDFM$x$ team, for their excellent driver and responsiveness to configuration issues. \item Thomas Esser, without whose marvelous \teTeX{} package \TL{} would have never existed. \item Michel Goossens, who co-authored the original documentation. \item Eitan Gurari, whose \TeX4ht is used to create the \HTML{} version of this documentation, and who worked tirelessly to improve it at short notice, every year. Eitan prematurely passed away in June 2009, and we dedicate this documentation to his memory. \item Hans Hagen, for much testing and making his \ConTeXt\ format (\url{http://pragma-ade.com}) work within \TL's framework. \item \Thanh, Martin Schr\"oder, and the pdf\TeX\ team (\url{http://pdftex.org}) for continuing enhancements of \TeX's abilities. \item Hartmut Henkel, for significant development contributions to pdf\TeX\, Lua\TeX, and more. \item Taco Hoekwater, for major renewed development efforts on MetaPost and (Lua)\TeX\ (\url{http://luatex.org}) itself, incorporating \ConTeXt\ into \TL, giving Kpathsea multi-threaded functionality, and much more. \item Pawe{\l} Jackowski, for the Windows installer \cmdname{tlpm}, and Tomasz {\L}uczak, for \cmdname{tlpmgui}, used in past releases. \item Akira Kakuto, for providing the Windows binaries from his \acro{W32TEX} distribution for Japanese \TeX\ (\url{http://w32tex.org}), and many other development contributions. \item Jonathan Kew, for developing the remarkable \XeTeX{} engine and taking the time and trouble to integrate it in \TL{}, as well as the initial version of the Mac\TeX\ installer, and also for our recommended front-end \TeX{}works. \item Dick Koch, for maintaining Mac\TeX\ (\url{http://tug.org/mactex}) in very close tandem with \TL{}, and for his great good cheer in doing so. \item Reinhard Kotucha, for major contributions to the \TL{} 2008 infrastructure and installer, as well as Windows research efforts, the \texttt{getnonfreefonts} script, and more. \item Siep Kroonenberg, also for major contributions to the \TL{} 2008 infrastructure and installer, especially on Windows, and for the bulk of work updating this manual describing those features. \item Heiko Oberdiek, for the \pkgname{epstopdf} package and many others, compressing the huge \pkgname{pst-geo} data files so we could include them, and most of all, for his remarkable work on \pkgname{hyperref}. \item Petr Ol\v{s}ak, who coordinated and checked all the Czech and Slovak material very carefully. \item Toshio Oshima, for his \cmdname{dviout} previewer for Windows. \item Manuel P\'egouri\'e-Gonnard, for helping with package updates, documentation improvements, and \cmdname{texdoc} development. \item Fabrice Popineau, for the original Windows support in \TL{} and work on the French documentation. \item Norbert Preining, the principal architect of the \TL{} 2008 infrastructure and installer, and also for coordinating the Debian version of \TL{} (together with Frank K\"uster), making many suggestions along the way. \item Sebastian Rahtz, for originally creating \TL{} and maintaining it for many years. \item Phil Taylor, for setting up the BitTorrent downloads. \item Tomasz Trzeciak, for wide-ranging help with Windows. \item Vladimir Volovich, for substantial help with porting and other maintenance issues, and especially for making it feasible to include \cmdname{xindy}. \item Staszek Wawrykiewicz, the principal tester for all of \TL{}, and coordinator of the many major Polish contributions: fonts, Windows installation, and more. \item Olaf Weber, for his patient maintenance of \Webc. \item Gerben Wierda, for creating and maintaining the original \MacOSX\ support, and much integration and testing. \item Graham Williams, on whose work the \TeX\ Catalogue of packages depends. \end{itemize*} Builders of the binaries: Ettore Aldrovandi (\pkgname{i386-solaris}, \pkgname{x86\_64-solaris}), Alan Braslau (\pkgname{amd64-kfreebsd}, \pkgname{i386-kfreebsd}), Peter Breitenlohner (\pkgname{x86\_64-linux}), Karl Berry (\pkgname{i386-linux}), Ken Brown (\pkgname{i386-cygwin}), Akira Kakuto (\pkgname{win32}), Dick Koch (\pkgname{universal-darwin}, \pkgname{x86\_64-darwin}), Nikola Le\v{c}i\'c (\pkgname{amd64-freebsd}, \pkgname{i386-freebsd}), Mojca Miklavec (\pkgname{mipsel-linux}), Norbert Preining (\pkgname{alpha-linux}), Thomas Schmitz (\pkgname{powerpc-linux}), Boris Veytsman (\pkgname{armel-linux}), Vladimir Volovich (\pkgname{powerpc-aix}, \pkgname{sparc-solaris}), Olaf Weber (\pkgname{mips-irix}). For information on the \TL{} build process, see \url{http://tug.org/texlive/build.html}. Translators of this manual: Boris Veytsman (Russian), Jjgod Jiang, Jinsong Zhao, Yue Wang, \& Helin Gai (Chinese), Uwe Ziegenhagen (German), Manuel P\'egouri\'e-Gonnard (French), Marco Pallante (Italian), Nikola Le\v{c}i\'c (Serbian), Petr Sojka \& Jan Busa (Czech\slash Slovak), Staszek Wawrykiewicz (Polish). The \TL{} documentation web page is \url{http://tug.org/texlive/doc.html}. Of course the most important acknowledgement must go to Donald Knuth, first for inventing \TeX, and then for giving it to the world. \section{Release history} \label{sec:history} \subsection{Past} Discussion began in late 1993 when the Dutch \TeX{} Users Group was starting work on its 4All\TeX{} \CD{} for \acro{MS-DOS} users, and it was hoped at that time to issue a single, rational, \CD{} for all systems. This was too ambitious a target for the time, but it did spawn not only the very successful 4All\TeX{} \CD{}, but also the \acro{TUG} Technical Council working group on a \emph{\TeX{} Directory Structure} (\url{http://tug.org/tds}), which specified how to create consistent and manageable collections of \TeX{} support files. A complete draft of the \TDS{} was published in the December 1995 issue of \textsl{TUGboat}, and it was clear from an early stage that one desirable product would be a model structure on \CD{}. The distribution you now have is a very direct result of the working group's deliberations. It was also clear that the success of the 4All\TeX{} \CD{} showed that Unix users would benefit from a similarly easy system, and this is the other main strand of \TL. We first undertook to make a new Unix-based \TDS{} \CD{} in the autumn of 1995, and quickly identified Thomas Esser's \teTeX{} as the ideal setup, as it already had multi-platform support and was built with portability across file systems in mind. Thomas agreed to help, and work began seriously at the start of 1996. The first edition was released in May 1996. At the start of 1997, Karl Berry completed a major new release of Web2c, which included nearly all the features which Thomas Esser had added in \teTeX, and we decided to base the 2nd edition of the \CD{} on the standard \Webc, with the addition of \teTeX's \texttt{texconfig} script. The 3rd edition of the \CD{} was based on a major revision of \Webc, 7.2, by Olaf Weber; at the same time, a new revision of \teTeX was being made, and \TL{} included almost all of its features. The 4th edition followed the same pattern, using a new version of \teTeX, and a new release of \Webc{} (7.3). The system now included a complete Windows setup. For the 5th edition (March 2000) many parts of the \CD{} were revised and checked, updating hundreds of packages. Package details were stored in XML files. But the major change for \TeX\ Live 5 was that all non-free software was removed. Everything in \TL{} is now intended to be compatible with the Debian Free Software Guidelines (\url{http://www.debian.org/intro/free}); we have done our best to check the license conditions of all packages, but we would very much appreciate hearing of any mistakes. The 6th edition (July 2001) had much more material updated. The major change was a new install concept: the user could select a more exact set of needed collections. Language-related collections were completely reorganized, so selecting any of them installs not only macros, fonts, etc., but also prepares an appropriate \texttt{language.dat}. The 7th edition of 2002 had the notable addition of \MacOSX{} support, and the usual myriad of updates to all sorts of packages and programs. An important goal was integration of the source back with \teTeX, to correct the drift apart in versions~5 and~6. \subsubsection{2003} In 2003, with the continuing flood of updates and additions, we found that \TL{} had grown so large it could no longer be contained on a single \CD, so we split it into three different distributions (see section~\ref{sec:tl-coll-dists}, \p.\pageref{sec:tl-coll-dists}). In addition: \begin{itemize*} \item At the request of the \LaTeX{} team, we changed the standard \cmdname{latex} and \cmdname{pdflatex} commands to now use \eTeX{} (see \p.\pageref{text:etex}). \item The new Latin Modern fonts were included (and are recommended). \item Support for Alpha \acro{OSF} was removed (\acro{HPUX} support was removed previously), since no one had (or volunteered) hardware available on which to compile new binaries. \item Windows setup was substantially changed; for the first time an integrated environment based on XEmacs was introduced. \item Important supplementary programs for Windows (Perl, Ghost\-script, Image\-Magick, Ispell) are now installed in the \TL{} installation directory. \item Font map files used by \cmdname{dvips}, \cmdname{dvipdfm} and \cmdname{pdftex} are now generated by the new program \cmdname{updmap} and installed into \dirname{texmf/fonts/map}. \item \TeX{}, \MF{}, and \MP{} now, by default, output most input characters (32 and above) as themselves in output (e.g., \verb|\write|) files, log files, and the terminal, i.e., \emph{not} translated using the \verb|^^| notation. In \TL{}~7, this translation was dependent on the system locale settings; now, locale settings do not influence the \TeX{} programs' behavior. If for some reason you need the \verb|^^| output, rename the file \verb|texmf/web2c/cp8bit.tcx|. (Future releases will have cleaner ways to control this.) \item This documentation was substantially revised. \item Finally, since the edition numbers had grown unwieldy, the version is now simply identified by the year: \TL{} 2003. \end{itemize*} \subsubsection{2004} 2004 saw many changes: \begin{itemize} \item If you have locally-installed fonts which use their own \filename{.map} or (much less likely) \filename{.enc} support files, you may need to move those support files. \filename{.map} files are now searched for in subdirectories of \dirname{fonts/map} only (in each \filename{texmf} tree), along the \envname{TEXFONTMAPS} path. Similarly, \filename{.enc} files are now searched for in subdirectories of \dirname{fonts/enc} only, along the \envname{ENCFONTS} path. \cmdname{updmap} will attempt to warn about problematic files. For methods of handling this and other information, please see \url{http://tug.org/texlive/mapenc.html}. \item The \TK\ has been expanded with the addition of a \MIKTEX-based installable \CD, for those who prefer that implementation to Web2C. See section~\ref{sec:overview-tl} (\p.\pageref{sec:overview-tl}). \item Within \TL, the single large \dirname{texmf} tree of previous releases has been replaced by three: \dirname{texmf}, \dirname{texmf-dist}, and \dirname{texmf-doc}. See section~\ref{sec:tld} (\p.\pageref{sec:tld}), and the \filename{README} files for each. \item All \TeX-related input files are now collected in the \dirname{tex} subdirectory of \dirname{texmf*} trees, rather than having separate sibling directories \dirname{tex}, \dirname{etex}, \dirname{pdftex}, \dirname{pdfetex}, etc. See \CDref{texmf-dist/doc/generic/tds/tds.html\#Extensions} {\texttt{texmf-dist/doc/generic/tds/tds.html\#Extensions}}. \item Helper scripts (not meant to be invoked by users) are now located in a new \dirname{scripts} subdirectory of \dirname{texmf*} trees, and can be searched for via \verb|kpsewhich -format=texmfscripts|. So if you have programs which call such scripts, they'll need to be adjusted. See \CDref{texmf-dist/doc/generic/tds/tds.html\#Scripts} {\texttt{texmf-dist/doc/generic/tds/tds.html\#Scripts}}. \item Almost all formats leave most characters printable as themselves via the ``translation file'' \filename{cp227.tcx}, instead of translating them with the \verb|^^| notation. Specifically, characters at positions 32--256, plus tab, vertical tab, and form feed are considered printable and not translated. The exceptions are plain \TeX\ (only 32--126 printable), \ConTeXt\ (0--255 printable), and the \OMEGA-related formats. This default behavior is almost the same as in \TL\,2003, but it's implemented more cleanly, with more possibilities for customization. See \CDref{texmf/doc/web2c/web2c.html\#TCX-files} {\texttt{texmf/doc/web2c/web2c.html\#TCX-files}}. (By the way, with Unicode input, \TeX\ may output partial character sequences when showing error contexts, since it is byte-oriented.) \item \textsf{pdfetex} is now the default engine for all formats except (plain) \textsf{tex} itself. (Of course it generates \acro{DVI} when run as \textsf{latex}, etc.) This means, among other things, that the microtypographic features of \textsf{pdftex} are available in \LaTeX, \ConTeXt, etc., as well as the \eTeX\ features (\OnCD{texmf-dist/doc/etex/base/}). It also means it's \emph{more important than ever} to use the \pkgname{ifpdf} package (works with both plain and \LaTeX) or equivalent code, because simply testing whether \cs{pdfoutput} or some other primitive is defined is not a reliable way to determine if \acro{PDF} output is being generated. We made this backward compatible as best we could this year, but next year, \cs{pdfoutput} may be defined even when \acro{DVI} is being written. \item pdf\TeX\ (\url{http://pdftex.org}) has many new features: \begin{itemize*} \item \cs{pdfmapfile} and \cs{pdfmapline} provide font map support from within a document. \item Microtypographic font expansion can be used more easily.\\ \url{http://www.ntg.nl/pipermail/ntg-pdftex/2004-May/000504.html} \item All parameters previously set through the special configuration file \filename{pdftex.cfg} must now be set through primitives, typically in \filename{pdftexconfig.tex}; \filename{pdftex.cfg} is no longer supported. Any extant \filename{.fmt} files must be redumped when \filename{pdftexconfig.tex} is changed. \item See the pdf\TeX\ manual for more: \OnCD{texmf-dist/doc/pdftex/manual/pdftex-a.pdf}. \end{itemize*} \item The \cs{input} primitive in \cmdname{tex} (and \cmdname{mf} and \cmdname{mpost}) now accepts double quotes containing spaces and other special characters. Typical examples: \begin{verbatim} \input "filename with spaces" % plain \input{"filename with spaces"} % latex \end{verbatim} See the Web2C manual for more: \OnCD{texmf/doc/web2c}. \item enc\TeX\ support is now included within Web2C and consequently all \TeX\ programs, via the \optname{-enc} option\Dash \emph{only when formats are built}. enc\TeX\ supports general re-encoding of input and output, enabling full support of Unicode (in \acro{UTF}-8). See \OnCD{texmf-dist/doc/generic/enctex/} and \url{http://www.olsak.net/enctex.html}. \item Aleph, a new engine combining \eTeX\ and \OMEGA, is available. A little information is available in \OnCD{texmf-dist/doc/aleph/base} and \url{http://www.tex.ac.uk/cgi-bin/texfaq2html?label=aleph}. The \LaTeX-based format for Aleph is named \textsf{lamed}. \item The latest \LaTeX\ release has a new version of the \acro{LPPL}\Dash now officially a Debian-approved license. Assorted other updates, see the \filename{ltnews} files in \OnCD{texmf-dist/doc/latex/base}. \item \cmdname{dvipng}, a new program for converting \acro{DVI} to \acro{PNG} image files, is included. See \OnCD{texmf/doc/man/man1/dvipng.1}. \item We reduced the \pkgname{cbgreek} package to a ``medium'' sized set of fonts, with the assent and advice of the author (Claudio Beccari). The excised fonts are the invisible, outline, and transparency ones, which are relatively rarely used, and we needed the space. The full set is of course available from \acro{CTAN} (\url{http://mirror.ctan.org/tex-archive/fonts/greek/cb}). \item \cmdname{oxdvi} has been removed; just use \cmdname{xdvi}. \item The \cmdname{ini} and \cmdname{vir} commands (links) for \cmdname{tex}, \cmdname{mf}, and \cmdname{mpost} are no longer created, such as \cmdname{initex}. The \cmdname{ini} functionality has been available through the command-line option \optname{-ini} for years now. \item \textsf{i386-openbsd} platform support was removed. Since the \pkgname{tetex} package in the \acro{BSD} Ports system is available, and \acro{GNU/}Linux and Free\acro{BSD} binaries were available, it seemed volunteer time could be better spent elsewhere. \item On \textsf{sparc-solaris} (at least), you may have to set the \envname{LD\_LIBRARY\_PATH} environment variable to run the \pkgname{t1utils} programs. This is because they are compiled with C++, and there is no standard location for the runtime libraries. (This is not new in 2004, but wasn't previously documented.) Similarly, on \textsf{mips-irix}, the \acro{MIPS}pro 7.4 runtimes are required. \end{itemize} \subsubsection{2005} 2005 saw the usual huge number of updates to packages and programs. The infrastructure stayed relatively stable from 2004, but inevitably there were some changes there as well: \begin{itemize} \item New scripts \cmdname{texconfig-sys}, \cmdname{updmap-sys}, and \cmdname{fmtutil-sys} were introduced, which modify the configuration in the system trees. The \cmdname{texconfig}, \cmdname{updmap}, and \cmdname{fmtutil} scripts now modify user-specific files, under \dirname{$HOME/.texlive2005}. \item Corresponding new variables \envname{TEXMFCONFIG} and \envname{TEXMFSYSCONFIG} to specify the trees where configuration files (user or system, respectively) are found. Thus, you may need to move personal versions of \filename{fmtutil.cnf} and \filename{updmap.cfg} to these places; another option is to redefine \envname{TEXMFCONFIG} or \envname{TEXMFSYSCONFIG} in \filename{texmf.cnf}. In any case the real location of these files and the values of \envname{TEXMFCONFIG} and \envname{TEXMFSYSCONFIG} must agree. See section~\ref{sec:texmftrees}, \p.\pageref{sec:texmftrees}. \item Last year, we kept \verb|\pdfoutput| and other primitives undefined for \dvi\ output, even though the \cmdname{pdfetex} program was being used. This year, as promised, we undid that compatibility measure. So if your document uses \verb|\ifx\pdfoutput\undefined| to test if PDF is being output, it will need to be changed. You can use the package \pkgname{ifpdf.sty} (which works under both plain \TeX\ and \LaTeX) to do this, or steal its logic. \item Last year, we changed most formats to output (8-bit) characters as themselves (see previous section). The new TCX file \filename{empty.tcx} now provides an easier way to get the original \verb|^^| notation if you so desire, as in: \begin{verbatim} latex --translate-file=empty.tcx yourfile.tex \end{verbatim} \item The new program \cmdname{dvipdfmx} is included for translation of DVI to PDF; this is an actively maintained update of \cmdname{dvipdfm} (which is also still available for now, though no longer recommended). \item The new programs \cmdname{pdfopen} and \cmdname{pdfclose} are included to allow reloading of pdf files in the Adobe Acrobat Reader without restarting the program. (Other pdf readers, notably \cmdname{xpdf}, \cmdname{gv}, and \cmdname{gsview}, have never suffered from this problem.) \item For consistency, the variables \envname{HOMETEXMF} and \envname{VARTEXMF} have been renamed to \envname{TEXMFHOME} and \envname{TEXMFSYSVAR}, respectively. There is also \envname{TEXMFVAR}, which is by default user-specific. See the first point above. \end{itemize} \subsubsection{2006--2007} In 2006--2007, the major new addition to \TL{} was the \XeTeX{} program, available as the \texttt{xetex} and \texttt{xelatex} programs; see \url{http://scripts.sil.org/xetex}. MetaPost also received a notable update, with more planned for the future (\url{http://tug.org/metapost/articles}), likewise pdf\TeX{} (\url{http://tug.org/applications/pdftex}). The \TeX\ \filename{.fmt} (high-speed format) and the similar files for MetaPost and \MF\ are now stored in subdirectories of \dirname{texmf/web2c}, instead of in the directory itself (although the directory is still searched, for the sake of existing \filename{.fmt}'s). The subdirectories are named for the `engine' in use, such as \filename{tex} or \filename{pdftex} or \filename{xetex}. This change should be invisible in normal use. The (plain) \texttt{tex} program no longer reads \texttt{\%\&} first lines to determine what format to run; it is the pure Knuthian \TeX. (\LaTeX\ and everything else do still read \texttt{\%\&} lines). Of course the year also saw (the usual) hundreds of other updates to packages and programs. As usual, please check \acro{CTAN} (\url{http://mirror.ctan.org}) for updates. Internally, the source tree is now stored in Subversion, with a standard web interface for viewing the tree, as linked from our home page. Although not visible in the final distribution, we expect this will provide a stable development foundation for future years. Finally, in May 2006 Thomas Esser announced that he would no longer be updating te\TeX{} (\url{http://tug.org/tetex}). As a result, there was been a surge of interest in \TL{}, especially among \GNU/Linux distributors. (There is a new \texttt{tetex} installation scheme in \TL{}, which provides an approximate equivalent.) We hope this will eventually translate to improvements in the \TeX\ environment for everyone. \subsubsection{2008} In 2008, the entire \TL{} infrastructure was redesigned and reimplemented. Complete information about an installation is now stored in a plain text file \filename{tlpkg/texlive.tlpdb}. Among other things, this finally makes possible upgrading a \TL{} installation over the Internet after the initial installation, a feature MiK\TeX\ has provided for many years. We expect to regularly update new packages as they are released to \CTAN. The major new engine Lua\TeX\ (\url{http://luatex.org}) is included; besides a new level of flexibility in typesetting, this provides an excellent scripting language for use both inside and outside of \TeX\ documents. Support among Windows and the Unix-based platforms is now much more uniform. In particular, most Perl and Lua scripts are now available on Windows, using the Perl internally distributed with \TL. The new \cmdname{tlmgr} script (section~\ref{sec:tlmgr}) is the general interface for managing \TL{} after the initial installation. It handles package updates and consequent regeneration of formats, map files, and language files, optionally including local additions. With the advent of \cmdname{tlmgr}, the \cmdname{texconfig} actions to edit the format and hyphenation configuration files are now disabled. The \cmdname{xindy} indexing program (\url{http://xindy.sourceforge.net/}) is now included on most platforms. The \cmdname{kpsewhich} tool can now report all matches for a given file (option \optname{--all}) and limit matches to a given subdirectory (option \optname{--subdir}). The \cmdname{dvipdfmx} program now includes functionality to extract bounding box information, via the command name \cmdname{extractbb}; this was one of the last features provided by \cmdname{dvipdfm} not in \cmdname{dvipdfmx}. The font aliases \filename{Times-Roman}, \filename{Helvetica}, and so on have been removed. Different packages expected them to behave differently (in particular, to have different encodings), and there was no good way to resolve this. The \pkgname{platex} format has been removed, to resolve a name conflict with a completely different Japanese \pkgname{platex}; the \pkgname{polski} package is now the main Polish support. Internally, the \web\ string pool files are now compiled into the binaries, to ease upgrades. Finally, the changes made by Donald Knuth in his `\TeX\ tuneup of 2008' are included in this release. See \url{http://tug.org/TUGboat/Articles/tb29-2/tb92knut.pdf}. \subsubsection{2009} In 2009, the default output format for Lua\AllTeX\ is now PDF, to take advantage of Lua\TeX's OpenType support, et al. New executables named \code{dviluatex} and \code{dvilualatex} run Lua\TeX\ with DVI output. The Lua\TeX\ home page is \url{http://luatex.org}. The original Omega engine and Lambda format have been excised, after discussions with the Omega authors. The updated Aleph and Lamed remain, as do the Omega utilities. A new release of the AMS \TypeI\ fonts is included, including Computer Modern: a few shape changes made over the years by Knuth in the Metafont sources have been integrated, and the hinting has been updated. The Euler fonts have been thoroughly reshaped by Hermann Zapf (see \url{http://tug.org/TUGboat/Articles/tb29-2/tb92hagen-euler.pdf}). In all cases, the metrics remain unchanged. The AMS fonts home page is \url{http://www.ams.org/tex/amsfonts.html}. The new GUI front end \TeX{}works is included for Windows, and also in Mac\TeX. For other platforms, and more information, see the \TeX{}works home page, \url{http://tug.org/texworks}. It is a cross-platform front end inspired by the \MacOSX\ TeXShop editor, aiming at ease-of-use. The graphics program Asymptote is included for several platforms. This implements a text-based graphics description language vaguely akin to MetaPost, but with advanced 3D support and other features. Its home page is \url{http://asymptote.sourceforge.net}. The separate \code{dvipdfm} program has been replaced by \code{dvipdfmx}, which operates in a special compatibility mode under that name. \code{dvipdfmx} includes \acro{CJK} support and has accumulated many other fixes over the years since the last \code{dvipdfm} release. The DVIPDFMx home page is \url{http://project.ktug.or.kr/dvipdfmx}. Executables for the \pkgname{cygwin} and \pkgname{i386-netbsd} platforms are now included, while we were advised that Open\acro{BSD} users get \TeX\ through their package systems, plus there were difficulties in making binaries that have a chance of working on more than one version. A miscellany of smaller changes: we now use \pkgname{xz} compression, the stable replacement for \pkgname{lzma} (\url{http://tukaani.org/xz/}); a literal |$| is allowed in filenames when it does not introduce a known variable name; the Kpathsea library is now multi-threaded (made use of in MetaPost); the entire \TL{} build is now based on Automake. Final note on the past: all releases of \TL{}, along with ancillary material such as \CD\ labels, are available at \url{ftp://tug.org/historic/systems/texlive}. \subsubsection{2010} \label{sec:2010news} % keep with 2010 In 2010, the default version for PDF output is now 1.5, enabling more compression. This applies to all the \TeX\ engines when used to produce PDF and to \code{dvipdfmx}. Loading the \pkgname{pdf14} \LaTeX\ package changes back to PDF~1.4, or set |\pdfminorversion=4|. pdf\AllTeX\ now \emph{automatically} converts a requested Encapsulated PostScript (EPS) file to PDF, via the \pkgname{epstopdf} package, when and if the \LaTeX\ \code{graphics.cfg} configuration file is loaded, and PDF is being output. The default options are intended to eliminate any chance of hand-created PDF files being overwritten, but you can also prevent \code{epstopdf} from being loaded at all by putting |\newcommand{\DoNotLoadEpstopdf}{}| (or |\def...|) before the \cs{documentclass} declaration. It is also not loaded if the \pkgname{pst-pdf} package is used. For more details, see the \pkgname{epstopdf} package documentation (\url{http://ctan.org/pkg/epstopdf-pkg}). A related change is that execution of a very few external commands from \TeX, via the \cs{write18} feature, is now enabled by default. These are commands are \code{repstopdf}, \code{makeindex}, \code{kpsewhich}, \code{bibtex}, and \code{bibtex8}; the list is defined in \code{texmf.cnf}. Environments which must disallow all such external commands can deselect this option in the installer (see section~\ref{sec:options}), or override the value after installation by running |tlmgr conf texmf shell_escape 0|. Yet another related change is that \BibTeX\ and Makeindex now refuse to write their output files to an arbitrary directory (like \TeX\ itself), by default. This is so they can now be enabled for use by the restricted \cs{write18}. To change this, the \envname{TEXMFOUTPUT} environment variable can be set, or the |openout_any| setting changed. \XeTeX\ now supports margin kerning along the same lines as pdf\TeX. (Font expansion is not presently supported.) By default, \prog{tlmgr} now saves one backup of each package updated (\code{tlmgr option autobackup 1}), so broken packages updates can be easily reverted with \code{tlmgr restore}. If you do post-install updates, and don't have the disk space for the backups, run \code{tlmgr option autobackup 0}. New programs included: the p\TeX\ engine and related utilities for typesetting Japanese; the \BibTeX{}U program for Unicode-enabled \BibTeX; the \prog{chktex} utility (\url{http://baruch.ev-en.org/proj/chktex}) for checking \AllTeX\ documents; the \prog{dvisvgm} (\url{http://dvisvgm.sourceforge.net}) DVI-to-SVG translator. Executables for these new platforms are now included: \code{amd64-freebsd}, \code{amd64-kfreebsd}, \code{i386-freebsd}, \code{i386-kfreebsd}, \code{x86\_64-darwin}, \code{x86\_64-solaris}. A change in \TL{} 2009 that we failed to note: numerous \TeX4ht-related executables (\url{http://tug.org/tex4ht}) were removed from the binary directories. The generic \code{mk4ht} program can be used to run any of the various \code{tex4ht} combinations. Finally, the \TL{} release on the \TK\ \DVD\ can no longer be run live (oddly enough). A single \DVD\ no longer has enough room. One beneficial side effect is that installation from the physical \DVD\ is much faster. \subsubsection{2011} The \MacOSX\ binaries (\code{universal-darwin} and \code{x86\_64-darwin}) now work only on Leopard or later; Panther and Tiger are no longer supported. The \code{biber} program for bibliography processing is included on common platforms. Its development is closely coupled with the \code{biblatex} package, which completely reimplements the bibliographical facilities provided by LaTeX. The MetaPost (\code{mpost}) program no longer creates or uses \code{.mem} files. The needed files, such as \code{plain.mp}, are simply read on every run. This is related to supporting MetaPost as a library, which is another significant though not user-visible change. The \code{updmap} implementation in Perl, previously used only on Windows, has been revamped and is now used on all platforms. There shouldn't be any user-visible changes as a result, except that it runs much faster. % \htmlanchor{news} \subsection{Present} \label{sec:tlcurrent} \code{tlmgr} supports updates from multiple network repositories. The section on multiple repositories in the \code{tlmgr help} output has more. The parameter \cs{XeTeXdashbreakstate} is set to~1 by default, for both \code{xetex} and \code{xelatex}. This allows line breaks after em-dashes and en-dashes, which has always been the behavior of plain \TeX, \LaTeX, Lua\TeX, etc. Existing \XeTeX\ documents which must retain perfect line-break compatibility will need to set \cs{XeTeXdashbreakstate} to~0 explicitly. The output files generated by \code{pdftex} and \code{dvips}, among others, can now exceed 2gb. The 35 standard PostScript fonts are included in the output of \code{dvips} by default, since so many different versions of them are extant. In the restricted \cs{write18} execution mode, set by default, \code{mpost} is now an allowed program. A \code{texmf.cnf} file is also found in \filename{../texmf-local}, e.g., \filename{/usr/local/texlive/texmf-local/web2c/texmf.cnf}, if it exists. The \code{updmap} script reads a per-tree \code{updmap.cfg} instead of one global config. This change should be invisible, unless you edited your updmap.cfg's directly. The \code{updmap --help} output has more. Platforms: \pkgname{armel-linux} and \pkgname{mipsel-linux} added; \pkgname{sparc-linux} and \pkgname{i386-netbsd} are no longer in the main distribution, but are available for installation as custom binaries, along with a variety of other platforms: \url{http://tug.org/texlive/custom-bin.html}. \subsection{Future} \emph{\TL{} is not perfect!} (And never will be.) We intend to continue to release new versions, and would like to provide more help material, more utilities, more installation programs, and (of course) an ever-improved and better-checked tree of macros and fonts. This work is all done by volunteers in their spare time, and so there is always more to do. Please see \url{http://tug.org/texlive/contribute.html}. Please send corrections, suggestions, and offers of help to: \begin{quote} \email{tex-live@tug.org} \\ \url{http://tug.org/texlive} \end{quote} \medskip \noindent \textsl{Happy \TeX ing!} \end{document}